[Energy requirements of workers in the coke chemical industry].

PubMed

Vankhanen, V D; Nelepa, A E

1978-01-01

Energy spent by workers engaged in the basic departments of a coke-chemical plant during working hours and performing operations after the Douglas-Holdeine method was measured and total energy expenditures during separate periods of the day and as a whole determined. Depending upon their jobs the energy spent by the workers during working hours varies within a range of 825 to 1860 Kcal. The energy expenditure during the time outside work, including sleep, amounts to from 1482 up to 1756 Kcal. As concerns the calorific requirements of their alimentation the workers of coke-chemical industry are subdivided into 5 groups of labour-intensity within an interval of from 2500 to 3600 kcal (for men) and from 2200 to 3100 kcal (for women).

[Nursing workers' perceptions regarding the handling of hazardous chemical waste].

PubMed

Costa, Taiza Florêncio; Felli, Vanda Elisa Andres; Baptista, Patrícia Campos Pavan

2012-12-01

The objectives of this study were to identify the perceptions of nursing workers regarding the handling of hazardous chemical waste at the University of São Paulo University Hospital (HU-USP), and develop a proposal to improve safety measures. This study used a qualitative approach and a convenience sample consisting of eighteen nursing workers. Data collection was performed through focal groups. Thematic analysis revealed four categories that gave evidence of training deficiencies in terms of the stages of handling waste. Difficulties that emerged included a lack of knowledge regarding exposure and its impact, the utilization of personal protective equipment versus collective protection, and suggestions regarding measures to be taken by the institution and workers for the safe handling of hazardous chemical waste. The present data allowed for recommending proposals regarding the safe management of hazardous chemical waste by the nursing staff.

Six Strategies for Chemical Waste Minimization in Laboratories.

ERIC Educational Resources Information Center

Matteson, Gary C.; Hadley, Cheri R.

1991-01-01

Guidelines are offered to research administrators for reducing the volume of hazardous laboratory waste. Suggestions include a chemical location inventory, a chemical reuse facility, progressive contracts with chemical suppliers, internal or external chemical recycling mechanisms, a "chemical conservation" campaign, and laboratory fees for…

HEW to Set Laboratory Safety Standards.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1978

1978-01-01

Describes Department of Health, Education and Welfare (HEW) proposed guidelines for laboratories using chemical carcinogens. The guidelines are designed to provide protection for laboratory workers and their environment from exposure to all types of carcinogenic agents. (GA)

77 FR 13352 - Exxonmobil Chemical Company Films Business Division Including on-Site Leased Workers From...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,325] Exxonmobil Chemical..., applicable to ExxonMobil Chemical Company, Films Business Division, including on-site leased workers from... Chemical Company, Films Business Division. The Department has determined that these workers were...

Genotoxicity surveillance programme in workers dismantling World War I chemical ammunition.

PubMed

Mateuca, R A; Carton, C; Roelants, M; Roesems, S; Lison, D; Kirsch-Volders, M

2010-06-01

To evaluate the effectiveness of personal protective measures in a dismantling plant for chemical weapons from World War I of the Belgian Defence. Seventeen NIOSH level B-equipped plant workers exposed to arsenic trichloride (AsCl(3)) in combination with phosgene or hydrogen cyanide (HCN) were compared to 24 NIOSH level C-protected field workers occasionally exposed to genotoxic chemicals (including AsCl(3)-phosgene/HCN) when collecting chemical ammunition, and 19 matched referents. Chromosomal aberrations (CA), micronuclei (MNCB and MNMC), sister chromatid exchanges (SCE) and high frequency cells (HFC) were analysed in peripheral blood lymphocytes. Urinary arsenic levels and genetic polymorphisms in major DNA repair enzymes (hOGG1(326), XRCC1(399), XRCC3(241)) were also assessed. SCE and HFC levels were significantly higher in plant-exposed versus referent subjects, but MNCB and MNMC were not different. MNCB, SCE and HFC levels were significantly higher and MNMC levels significantly lower in field-exposed workers versus referents. AsCl(3) exposure was not correlated with genotoxicity biomarkers. Protective measures for plant-exposed workers appear adequate, but protection for field-exposed individuals could be improved.

78 FR 54487 - Abbott Laboratories; Diagnostic-Hematology; Including On-Site Leased Workers From Manpower...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,379] Abbott Laboratories... February 22, 2013, applicable to workers of Abbott Laboratories, Diagnostic--Hematology division, including... Clara, California location of Abbott Laboratories, Diagnostic--Hematology Division. The Department has...

Potential allergy and irritation incidents among health care workers.

PubMed

Alamgir, Hasanat; Yu, Shicheng; Chavoshi, Negar; Ngan, Karen

2008-07-01

This study describes the types, causes, and outcomes of potential irritation and allergy incidents among workers in British Columbia's health care industry. Data on occupation-induced allergy and irritation incidents were extracted from a standardized database using the number of productive hours obtained from payroll data as a denominator during a 1-year period from three British Columbia health regions. Younger workers, female workers, facility support service workers, laboratory assistants and technicians, and maintenance and acute care workers were found to be at higher risk for allergy and irritation incidents. Major causes of allergy and irritation incidents included chemicals, blood and body fluids, food and objects, communicable diseases, air quality, and latex. A larger proportion of chemically induced incidents resulted in first aid care only, whereas non-chemical incidents required more emergency room visits.

Concept Attainment Teaching Methodology (CATM)--An Effective Approach for Training Workers on Chemicals Health Hazards

ERIC Educational Resources Information Center

Suleiman, Abdulqadir Mohamad

2016-01-01

Workers handling chemicals need to understand the risk to health involved in their work, and this requires training. In this study effectivity of concept attainment teaching methodology (CATM) as training strategy for cleaning workers was assessed. CATM was used to train workers on chemicals information and health hazards. Pictures, illustrations,…

[Biosafety in laboratories concerning exposure to biological agents].

PubMed

Vonesch, N; Tomao, P; Di Renzi, S; Vita, S; Signorini, S

2006-01-01

Laboratory workers are exposed to a variety of potential occupational health hazards including those deriving from infectious materials and cultures, radiations, toxic and flammable chemicals, as well as mechanical and electrical hazard. Although all of them are significant, this paper will focus on biological hazards present in clinical and research laboratories. In fact, in spite of numerous publications, guidelines and regulations, laboratory workers are still subject to infections acquired in the course of their researches. This paper describes some aspects that include good microbiological practices (GMPs), appropriate containment equipment, practices and operational procedures to minimize workers' risk of injury or illness.

Chemical safety practice amongst the health workers of Fiji.

PubMed

Naduva, Adriu

2006-09-01

The National Health Service of Fiji includes private and public institutions that use a variety of chemicals of varying hazardousness. A survey was carried out to describe chemical safety issues amongst health workers in Fiji. Questionnaires were given to 133 private and Government health institutions. Most health facilities lack awareness on safe chemical waste management and do not have technical training on chemical safety. Most institutions do not have chemical handling, packaging and labelling procedure and equipment with a marked deficiency in the vector sector. Most facilities state that they have adequate chemical safety information from the suppliers, while a few alarmingly still resort to container labels and information from colleagues.

EVALUATION OF CHEMICAL RELEASES AND WORKER EXPOSURES FROM FILTER PRESS OPERATIONS

EPA Science Inventory

The exposures (inhalation and dermal) and releases (air, water, solids, and process streams) associated with the filtration of industrial wastewater sludge from an electronics manufacturing plant were characterized. Chemical releases and worker exposures for a target chemical (t...

Factors influencing Australian agricultural workers' self-efficacy using chemicals in the workplace.

PubMed

Blackman, Ian R

2012-11-01

A hypothetical model was formulated to explore which factors can simultaneously influence the self-reported ability of agricultural employees to embrace chemical safety practices. Eight variables were considered in the study, including the employees' gender, age, duration of current employment status, and whether they were employed full-time or part-time. The self-efficacy measures of 169 participants were then estimated by measuring their self-rated ability to understand and perform different chemical safety practices. Models identifying employee self-efficacy pathways leading to worker readiness to engage in chemical safety were then tested using Partial Least Squares Path Analysis. Study results suggest that employees' self-efficacy to successfully engage in safe chemical practices in their workplace can be directly predicted by four variables, with additional indirect effects offered by one other variable, which cumulatively account for 41% of the variance of employees' chemical safety self-efficacy scores. The most significant predictor variables that directly influenced employees' self-efficacy in adopting chemical safety practices in the workplace were worker age, gender, years of employment, and concurrent confidence (self-efficacy) arising from prior experience using chemicals in the workplace. The variables of employees' prior knowledge and understanding about the use of administrative controls and personal protective equipment to protect workers from chemical exposure had no direct influence on self-efficacy to handle chemical emergencies. Employees' unfamiliarity with risk control strategies and reliance on material safety data sheets for information suggest that ongoing and targeted training are necessary if chemical safety issues are to be addressed.

Olfactory function in chemical workers exposed to acrylate and methacrylate vapors.

PubMed Central

Schwartz, B S; Doty, R L; Monroe, C; Frye, R; Barker, S

1989-01-01

An investigation of the olfactory function of 731 workers at a chemical facility which manufacturers acrylates and methacrylates was undertaken using a standardized quantitative test. In a cross-sectional analysis of the data, no associations of chemical exposure with olfactory test scores were observed. A nested case-control study designed to evaluate the cumulative effects of exposure on olfactory function, however, revealed elevated crude exposure odds ratios (95% confidence interval) of 2.0 (1.1, 3.8) for all workers and 6.0 (1.7, 21.5) for workers who never smoked cigarettes. Logistic regression analysis, adjusting for multiple confounders, revealed exposure odds ratios of 2.8 (1.1, 7.0) and 13.5 (2.1, 87.6) in these same groups, respectively, and a dose-response relationship between olfactory dysfunction and cumulative exposure scores--semi-quantitative indices of lifetime exposure to the acrylates. The data also revealed decreasing exposure odds ratios with increasing duration since last exposure to these chemicals, suggesting that the effects may be reversible. PMID:2784947

46 CFR 194.05-5 - Chemicals in the chemistry laboratory.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Chemicals in the chemistry laboratory. 194.05-5 Section....05-5 Chemicals in the chemistry laboratory. (a) Small working quantities of chemical stores in the chemistry laboratory which have been removed from the approved shipping container need not be marked or...

46 CFR 194.05-5 - Chemicals in the chemistry laboratory.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Chemicals in the chemistry laboratory. 194.05-5 Section....05-5 Chemicals in the chemistry laboratory. (a) Small working quantities of chemical stores in the chemistry laboratory which have been removed from the approved shipping container need not be marked or...

46 CFR 194.05-5 - Chemicals in the chemistry laboratory.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Chemicals in the chemistry laboratory. 194.05-5 Section....05-5 Chemicals in the chemistry laboratory. (a) Small working quantities of chemical stores in the chemistry laboratory which have been removed from the approved shipping container need not be marked or...

46 CFR 194.05-5 - Chemicals in the chemistry laboratory.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Chemicals in the chemistry laboratory. 194.05-5 Section....05-5 Chemicals in the chemistry laboratory. (a) Small working quantities of chemical stores in the chemistry laboratory which have been removed from the approved shipping container need not be marked or...

46 CFR 194.05-5 - Chemicals in the chemistry laboratory.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Chemicals in the chemistry laboratory. 194.05-5 Section....05-5 Chemicals in the chemistry laboratory. (a) Small working quantities of chemical stores in the chemistry laboratory which have been removed from the approved shipping container need not be marked or...

Hazardous Chemicals on the Job: A Workers Guide to Reducing Exposure.

ERIC Educational Resources Information Center

Conrad, Fran; Kayman, Lindsey

This guide is intended to assist workers in reducing their exposure to hazardous chemicals on the job. It describes a systematic preventive approach to hazardous chemicals that is based on the following steps: determining which chemicals are in use at a particular worksite (techniques for asking the company and steps to take if the company is…

Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling.

PubMed

Suleiman, Abdulqadir M; Svendsen, Kristin V H

2015-12-01

Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual level of importance of chemical health hazards and a model for working out the risk index (RI) indicating enterprises' conceptual risk level was established and used to categorize the enterprises. In 72.3% of cases, training takes place concurrently with task performances and in 67.4% experienced workers conduct the trainings. There is disparity between employers' opinion on competence level of the workers and reality. Lower conceptual level of importance was observed for cleaning enterprises of different sizes compared with regional safety delegates and occupational hygienists. Risk index values show no difference in risk level between small and large enterprises. Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step.

The influence of risk perception on biosafety level-2 laboratory workers' hand-to-face contact behaviors.

PubMed

Johnston, James D; Eggett, Dennis; Johnson, Michele J; Reading, James C

2014-01-01

Pathogen transmission in the laboratory is thought to occur primarily through inhalation of infectious aerosols or by direct contact with mucous membranes on the face. While significant research has focused on controlling inhalation exposures, little has been written about hand contamination and subsequent hand-to-face contact (HFC) transmission. HFC may present a significant risk to workers in biosafety level-2 (BSL-2) laboratories where there is typically no barrier between the workers' hands and face. The purpose of this study was to measure the frequency and location of HFC among BSL-2 workers, and to identify psychosocial factors that influence the behavior. Research workers (N = 93) from 21 BSL-2 laboratories consented to participate in the study. Two study personnel measured workers' HFC behaviors by direct observation during activities related to cell culture maintenance, cell infection, virus harvesting, reagent and media preparation, and tissue processing. Following observations, a survey measuring 11 psychosocial predictors of HFC was administered to participants. Study personnel recorded 396 touches to the face over the course of the study (mean = 2.6 HFCs/hr). Of the 93 subjects, 67 (72%) touched their face at least once, ranging from 0.2-16.0 HFCs/hr. Among those who touched their face, contact with the nose was most common (44.9%), followed by contact with the forehead (36.9%), cheek/chin (12.5%), mouth (4.0%), and eye (1.7%). HFC rates were significantly different across laboratories F(20, 72) = 1.85, p = 0.03. Perceived severity of infection predicted lower rates of HFC (p = 0.03). For every one-point increase in the severity scale, workers had 0.41 fewer HFCs/hr (r = -.27, P < 0.05). This study suggests HFC is common among BSL-2 laboratory workers, but largely overlooked as a major route of exposure. Workers' risk perceptions had a modest impact on their HFC behaviors, but other factors not considered in this study, including social modeling and

Laboratory Animal Workers' Attitudes and Perceptions Concerning Occupational Risk and Injury.

PubMed

Steelman, Eric D; Alexander, Jeffrey L

2016-01-01

Little is known regarding the risk perceptions and attitudes of laboratory animal care workers toward biologic safety. The purpose of this descriptive study was to assess the attitudes and perceptions of laboratory animal workers toward occupational and injury risk. Subscribers to the CompMed and TechLink listservs (n = 4808) were surveyed electronically, and 5.3% responded; data from 215 respondents were included in the final analysis. Primary variables of interest included AALAS certifications status, level of education, and responses to Likert-scale questions related to attitudes and perceptions of occupational risk and injury. Nonparametric (χ(2)) testing and measures of central tendency and dispersion were used to analyze and describe the data. According to 88.6% of respondents, biologic safety training is provided with information about zoonotic diseases of laboratory animals. Level of education was significantly related to perception of importance regarding wearing personal protective equipment. Participants indicated that appropriate support from coworkers and management staff is received, especially when performance and perception are hindered due to stress and fatigue. Laboratory animal staff are susceptible to injury and exposure to dangerous organisms and toxic substances. For this reason, to maximize safety, yearly biologic safety training should be provided, the importance of protective equipment adherence strengthened, and the culture of safety made a priority within the institution.

Reproductive Toxic Chemicals at Work and Efforts to Protect Workers' Health: A Literature Review.

PubMed

Rim, Kyung-Taek

2017-06-01

A huge number of chemicals are produced and used in the world, and some of them can have negative effects on the reproductive health of workers. To date, most chemicals and work environments have not been studied for their potential to have damaging effects on the workers' reproductive system. Because of the lack of information, many workers may not be aware that such problems can be related to occupational exposures. Newly industrialized countries such as Republic of Korea have rapidly amassed chemicals and other toxicants that pose health hazards, especially to the reproductive systems of workers. This literature review provides an overview of peer-reviewed literature regarding the teratogenic impact and need for safe handling of chemicals. Literature searches were performed using PubMed, Google Scholar, and ScienceDirect. Search strategies were narrowed based on author expertise and 100 articles were chosen for detailed analysis. A total of 47 articles met prespecified inclusion criteria. The majority of papers contained studies that were descriptive in nature with respect to the Medical Subject Headings (MeSH) terms and keywords: "reproductive and heath or hazard and/or workplace or workers or occupations." In the absence of complete information about the safe occupational handling of chemicals in Republic of Korea (other than a material safety data sheet), this review serves as a valuable reference for identifying and remedying potential gaps in relevant regulations. The review also proposes other public health actions including hazard surveillance and primary prevention activities such as reduction, substitution, ventilation, as well as protective equipment.

75 FR 879 - National Starch and Chemical Company Specialty Starches Division Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-62,282] National Starch and Chemical Company Specialty Starches Division Including On-Site Leased Workers From Page Employment, Island... Adjustment Assistance on December 13, 2007, applicable to workers of National Starch and Chemical Company...

Assessment and management of chemical exposure in the Mohs laboratory.

PubMed

Gunson, Todd H; Smith, Harvey R; Vinciullo, Carl

2011-01-01

The correct handling, storage, and disposal of chemicals used in the processing of tissue for Mohs micrographic surgery are essential. To identify the chemicals involved in the preparation of Mohs frozen sections and assess the associated occupational health risks. To quantify exposure levels of hazardous chemicals and ensure that they are minimized. A risk assessment form was completed for each chemical. Atmospheric sampling was performed at our previous laboratory for formaldehyde and volatile organic compounds. These data were used in the design of our new facility, where testing was repeated. Twenty-five chemicals were identified. Ten were classified as hazardous substances, 10 were flammable, six had specific disposal requirements, four were potential carcinogens, and three were potential teratogens. Formaldehyde readings at our previous laboratory were up to eight times the national exposure standard. Testing at the new laboratory produced levels well below the exposure standards. Chemical exposure within the Mohs laboratory can present a significant occupational hazard. Acutely toxic and potentially carcinogenic formaldehyde was found at high levels in a relatively standard laboratory configuration. A laboratory can be designed with a combination of physical environment and operational protocols that minimizes hazards and creates a safe working environment. © 2010 by the American Society for Dermatologic Surgery, Inc.

Safety in the Chemical Laboratory

ERIC Educational Resources Information Center

Steere, Norman V., Ed.

1974-01-01

Discusses the offering of a course in chemical and industrial hazards for junior and senior chemistry majors at City College of New York in 1972. Suggests inclusion of laboratory and industrial safety education as a formal part of chemistry or science curricula. (CC)

Evaluation of the health effects of occupational exposure of analytic laboratory workers processing illicit drug investigation files.

PubMed

Bentur, Y; Bentur, L; Rotenberg, M; Tepperberg, M; Leiba, R; Wolf, E Udi

2013-05-01

The Analytic Laboratory of Israel Police processes illicit drug files. In recent years, workers of this laboratory have complained of health problems. Limited information exists on the effect of occupational exposure to illicit drugs; biomonitoring was never done. To assess health effects and systemic absorption of illicit drugs in workers of the Analytic Laboratory occupationally exposed to illicit drugs. A prospective cohort study using health and occupational questionnaires, clinical assessments, and monitoring of urinary excretion of illicit drugs was conducted. The study included three blocks of one week each. At each week workers were assessed at the beginning (baseline), and the assessments were repeated at the end of the three working days. Urine specimens were analyzed for illicit drugs in an independent laboratory. Demographic, clinical, occupational, and laboratory data were subjected to descriptive analysis, and paired Student's t-test, chi-square analysis, and repeated measures model. Twenty-seven workers (age, 39.2 ± 8.3 years; 77.8% females) were included, yielding 122 paired samples. The following parameters were reduced at the end of shift compared with baseline: diastolic blood pressure (71.2 ± 11.2 and 77.2 ± 13.6 mmHg, respectively, p < 0.0001), FEV₁ (98.3 ± 14.6% and 100.7 ± 12.7%, respectively, p < 0.0001), FVC (101.4 ± 13.7% and 103.7 ± 14.0%, respectively, p = 0.003), and FEF₂₅₋₇₅ (85.7 ± 18.0% and 89.6 ± 18.7%, respectively, p = 0.01). Main health complaints included headache, fatigue, and dry eyes. No illicit drug was detected in the urine specimens. It is suggested that the health concerns of the laboratory workers were not related to the absorption of illicit drugs; environmental conditions (e.g. inadequate ventilation and respirable dust) can contribute to these concerns.

Safety in the Chemical Laboratory

ERIC Educational Resources Information Center

Steere, Norman V., Ed.

1975-01-01

The National Fire Protection Association has proposed national standards dealing with laboratory operations, ventilation, chemical handling and storage, compressed gases, fire prevention, and emergency procedures. The standards are likely to be used as guidelines by insurance companies, and governmental agencies that award grants and contracts for…

High urinary bisphenol A concentrations in workers and possible laboratory abnormalities.

PubMed

Wang, Feng; Hua, Jing; Chen, Minjian; Xia, Yankai; Zhang, Qi; Zhao, Renzheng; Zhou, Weixin; Zhang, Zhengdong; Wang, Bingling

2012-09-01

Bisphenol A (BPA) is widely used in epoxy resins in China. There are few reports on the adverse health effects of occupational exposure to BPA. This study examined associations between urinary BPA concentrations in workers and laboratory parameters for health status. Spot urine checks at the end shift on Friday were used for cross-sectional analysis of BPA concentrations, and blood or urinary markers of liver function, glucose homeostasis, thyroid function and cardiovascular diseases were measured. The 28 participants were workers in two semiautomatic epoxy resin factories. The average urinary BPA concentration was 55.73±5.48 ng/ml (geometric mean ± geometric SD) (range 5.56-1934.85 ng/ml). After adjusting for urine creatinine (Cr), it was 31.96±4.42 μg/g Cr (geometric mean ± geometric SD) (range 4.61-1253.69 μg/g Cr). BPA feeding operators showed the highest concentrations, over 10 times those of the crushing and packing and office workers. Higher BPA concentrations were associated with clinically abnormal concentrations of FT3, FT4, TT3, TT4, thyroid-stimulating hormone, glutamic-oxaloacetic transaminase and γ-glutamyl transferase. Workers with higher BPA concentrations showed higher FT3 concentrations (linear trend: p<0.001). Bivariate correlation tests for laboratory analytes within normal limits showed FT3 to be positively associated with logged BPA concentrations, r=0.57, p=0.002. FT4 was positively associated with lactate dehydrogenase, r=0.45, p=0.020, and insulin was positively associated with thyroid-stimulating hormone with r=0.57, p=0.009. Higher occupational BPA exposure, reflected in urinary concentrations of BPA, may be associated with thyroid hormone disruption.

Safety in the Chemical Laboratory: Flood Control.

ERIC Educational Resources Information Center

Pollard, Bruce D.

1983-01-01

Describes events leading to a flood in the Wehr Chemistry Laboratory at Marquette University, discussing steps taken to minimize damage upon discovery. Analyzes the problem of flooding in the chemical laboratory and outlines seven steps of flood control: prevention; minimization; early detection; stopping the flood; evaluation; clean-up; and…

SAFETY IN THE CHEMICAL LABORATORY.

ERIC Educational Resources Information Center

STEERE, NORMAN V.

MONTHLY ARTICLES ON LABORATORY SAFETY THAT APPEARED IN THE "JOURNAL OF CHEMICAL EDUCATION" BETWEEN JANUARY 1964, AND JANUARY 1967, ARE COMBINED IN THIS MANUAL FOR HIGH SCHOOL AND COLLEGE CHEMISTRY TEACHERS. A GENERAL SECTION DEALS WITH (1) RESPONSIBILITY FOR ACCIDENT PREVENTION, (2) SAFETY CONSIDERATION IN RESEARCH PROPOSALS, (3) A…

Chemical changes associated with the invasion of a Melipona scutellaris colony by Melipona rufiventris workers.

PubMed

Pianaro, Adriana; Flach, Adriana; Patricio, Eda F L R A; Nogueira-Neto, Paulo; Marsaioli, Anita J

2007-05-01

Wax constituents produced by worker bees and the chemistry of the nest batumen (mixture of wax, mud, and floral materials) in a Melipona scutellaris colony changed when it was invaded by Melipona rufiventris workers. Gas chromatography/mass spectrometry analyses showed that after invasion, the M. scutellaris workers of the invaded colony produced waxes with higher relative abundance of triacontanyl acetate and decreased the amounts of n-alkanes and n-9-alkenes. On the other hand, waxes from M. rufiventris workers displayed few changes. The change in the composition of the M. scutellaris waxes chemically differentiates that species from the M. rufiventris invader workers. Comparative analyses of batumens samples from pure and invaded colonies revealed greater amounts of terpenes and phenolic derivatives in the batumen from the invaded colony. This is the first report on the chemical characterization of batumens from stingless bees.

[The use of the antioxidant drink by healthy workers exposed to chemical factors].

PubMed

Bakirov, A B; Badamshina, G G; Timasheva, G V; Karimova, L K; Valeeva, E T; Galimova, R R; Daukaev, R A; Grigoryeva, L M

2016-01-01

In chemical manufacturing along with alimentary factors, workers are exposed to occupational hazards resulting in reduced antitoxic protective properties of the organism. The purpose of the present work was to develop a preventive method for reducing antitoxic functions of the body of healthy workers exposed to chemical factors. We have produced the drink containing carrot juice, honey, olive oil. The study involved 50 employees (the average age was 37.4±5.5 years) with experience of over 15 years. The main group (25 people) were workers with reduced antitoxic function who received the drink before each day's work shift for 10 days, the control group - workers with normal anti-toxic function, which did not take a drink. It was found that antioxidant drink intake by healthy employees of a chemical complex lead to the decrease of the level of molecules of average mass at λ=254 nm and at λ=280 nm by 15.1±7.2%, the activity of gammaglutamyl transferase - by 19.1%, alaninaminotransferase - by 44.1%, aspartataminotrans-ferase - by 34.7% (indicators of the syndrome of endogenous intoxication), the decrease of the content of malondialdehyde (as an indicator of an excessive accumulation of products of lipid peroxidation) - by 43.8%, while the activity of catalase, that indicates an increase in the antitoxic functions of the organism, increased by 37.5%.

Fertilizer/Chemical Sales and Service Worker. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for fertilizer/chemical sales and service workers. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational,…

Dr. William Tumas - Associate Laboratory Director, Materials and Chemical

Science.gov Websites

Chemical Science and Technology Dr. William Tumas - Associate Laboratory Director, Materials and Chemical , technical direction, and workforce development of the materials and chemical science and technology , program management, and program execution. He joined NREL in December 2009 as Director of the Chemical and

78 FR 5500 - Manufacturer of Controlled Substances; Notice of Registration; Chemic Laboratories, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...; Notice of Registration; Chemic Laboratories, Inc. By Notice dated September 25, 2012, and published in the Federal Register on October 2, 2012, 77 FR 60144, Chemic Laboratories, Inc., 480 Neponset Street... Chemic Laboratories, Inc., to manufacture the listed basic class of controlled substance is consistent...

Guidelines for Biosafety Training Programs for Workers Assigned to BSL-3 Research Laboratories.

PubMed

Homer, Lesley C; Alderman, T Scott; Blair, Heather Ann; Brocard, Anne-Sophie; Broussard, Elaine E; Ellis, Robert P; Frerotte, Jay; Low, Eleanor W; McCarthy, Travis R; McCormick, Jessica M; Newton, JeT'Aime M; Rogers, Francine C; Schlimgen, Ryan; Stabenow, Jennifer M; Stedman, Diann; Warfield, Cheryl; Ntiforo, Corrie A; Whetstone, Carol T; Zimmerman, Domenica; Barkley, Emmett

2013-03-01

The Guidelines for Biosafety Training Programs for Workers Assigned to BSL-3 Research Laboratories were developed by biosafety professionals who oversee training programs for the 2 national biocontainment laboratories (NBLs) and the 13 regional biocontainment laboratories (RBLs) that participate in the National Institute of Allergy and Infectious Diseases (NIAID) NBL/RBL Network. These guidelines provide a general training framework for biosafety level 3 (BSL-3) high-containment laboratories, identify key training concepts, and outline training methodologies designed to standardize base knowledge, understanding, and technical competence of laboratory personnel working in high-containment laboratories. Emphasis is placed on building a culture of risk assessment-based safety through competency training designed to enhance understanding and recognition of potential biological hazards as well as methods for controlling these hazards. These guidelines may be of value to other institutions and academic research laboratories that are developing biosafety training programs for BSL-3 research.

Chemical Hygiene and Safety Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berkner, K.

The objective of this Chemical Hygiene and Safety Plan (CHSP) is to provide specific guidance to all LBL employees and contractors who use hazardous chemicals. This Plan, when implemented, fulfills the requirements of both the Federal OSHA Laboratory Standard (29 CFR 1910.1450) for laboratory workers, and the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) for non-laboratory operations (e.g., shops). It sets forth safety procedures and describes how LBL employees are informed about the potential chemical hazards in their work areas so they can avoid harmful exposures and safeguard their health. Generally, communication of this Plan will occur through trainingmore » and the Plan will serve as a the framework and reference guide for that training.« less

Chemical mutagenesis in laboratory mammals. A bibliography on the effects of chemicals on germ cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Von Halle, E.S.

1973-09-01

A list of references is presented on chemical mutagenesis in laboratory mammals. The references relate primarily to chemical effects on germ cells. Only references to the use of chemicals or chemicals and radiation are included. The publication includes a citation index, agent index, chemical abstracts registry number index, organism index, KWIC index, author index, and first author index. (ERB)

(32)P measurment of urine samples and internal dose assessment for radiation workers in life science laboratories.

PubMed

Yoon, S; Pak, M-J; Park, S; Yoo, J; Ha, W-H; Jang, H-K; Kim, J K

2014-12-01

(32)P measurements of urine samples and internal dose assessments were conducted for workers in life science laboratories. A procedure for sample pre-treatment was established and validation was performed to exclude interference and to detect (32)P levels accurately. The detection conditions for Cherenkov radiation were evaluated and the accuracy of Cherenkov radiation measurements validated. The analytical and measurement procedures were applied to urine samples collected from 11 workers from life sciences laboratories. The results of the measurements generally indicated very low background radiation levels, but daily urine samples from two workers were above the minimum detectable activity. The (32)P concentrations for two of the workers were 29.3  ±  10.4 Bq•d(-1) and 24.1  ±  11.8 Bq•d(-1), respectively, at intake levels of 4.12 kBq and 2.61 kBq. The effective doses for these two workers were 4.6 μSv and 2.9 μSv. Overall, the results indicate very low levels of radioactivity, except for cases related to specific working conditions.

Laboratory animals and respiratory allergies: The prevalence of allergies among laboratory animal workers and the need for prophylaxis

PubMed Central

Ferraz, Erica; Arruda, Luisa Karla de Paula; Bagatin, Ericson; Martinez, Edson Z; Cetlin, Andrea A; Simoneti, Christian S; Freitas, Amanda S; Martinez, José A B; Borges, Marcos C; Vianna, Elcio O

2013-01-01

OBJECTIVE: Subjects exposed to laboratory animals are at a heightened risk of developing respiratory and allergic diseases. These diseases can be prevented by simple measures such as the use of personal protective equipment. We report here the primary findings of the Laboratory Animals and Respiratory Allergies Study regarding the prevalence of allergic diseases among laboratory animal workers, the routine use of preventive measures in laboratories and animal facilities, and the need for prevention programs. METHODS: Animal handlers and non-animal handlers from 2 Brazilian universities (University of São Paulo and State University of Campinas) answered specific questionnaires to assess work conditions and symptoms. These subjects also underwent spirometry, a bronchial challenge test with mannitol, and skin prick tests for 11 common allergens and 5 occupational allergens (rat, mouse, guinea pig, hamster, and rabbit). RESULTS: Four hundred fifty-five animal handlers (32±10 years old [mean±SD], 209 men) and 387 non-animal handlers (33±11 years old, 121 men) were evaluated. Sensitization to occupational allergens was higher among animal handlers (16%) than non-animal handlers (3%, p<0.01). Accessibility to personal protective equipment was measured at 85% (median, considering 73 workplaces of the animal handler group). Nineteen percent of the animal handlers indicated that they wear a respirator at all times while handling animals or working in the animal room, and only 25% of the animal handlers had received an orientation about animal-induced allergies, asthma, or rhinitis. CONCLUSION: In conclusion, our data indicate that preventive programs are necessary. We suggest providing individual advice to workers associated with institutional programs to promote a safer work environment. PMID:23778494

29 CFR 1915.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1915.1450 Section 1915.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY... chemicals in laboratories. Note: The requirements applicable to shipyard employment under this section are...

29 CFR 1915.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1915.1450 Section 1915.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY... chemicals in laboratories. Note: The requirements applicable to shipyard employment under this section are...

Less is Better. Laboratory Chemical Management for Waste Reduction.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

An objective of the American Chemical Society is to promote alternatives to landfilling for the disposal of laboratory chemical wastes. One method is to reduce the amount of chemicals that become wastes. This is the basis for the "less is better" philosophy. This bulletin discusses various techniques involved in purchasing control,…

Safety management and risk assessment in chemical laboratories.

PubMed

Marendaz, Jean-Luc; Friedrich, Kirstin; Meyer, Thierry

2011-01-01

The present paper highlights a new safety management program, MICE (Management, Information, Control and Emergency), which has been specifically adapted for the academic environment. The process starts with an exhaustive hazard inventory supported by a platform assembling specific hazards encountered in laboratories and their subsequent classification. A proof of concept is given by a series of implementations in the domain of chemistry targeting workplace health protection. The methodology is expressed through three examples to illustrate how the MICE program can be used to address safety concerns regarding chemicals, strong magnetic fields and nanoparticles in research laboratories. A comprehensive chemical management program is also depicted.

Safety in the Chemical Laboratory: Learning How to Run Safer Undergraduate Laboratories.

ERIC Educational Resources Information Center

Mohrig, Jerry R.

1983-01-01

Discusses responsibilities for providing safe experiments and for teaching about safety. Provides lists of references on chemical safety and regulated/potential carcinogens. Also discusses general laboratory safety procedures including waste disposal and recycling of solvents. (JM)

Developing a Behavioral Health Screening Program for BSL-4 Laboratory Workers at the National Institutes of Health

PubMed Central

Wilson, Deborah E.

2011-01-01

The events and aftermath of September 11, 2001, accelerated a search for personnel reliability test measures to identify individuals who could pose a threat to our nation's security and safety. The creation and administration of a behavioral health screen for BSL-4 laboratory workers at the National Institutes of Health represents a pioneering effort to proactively build a BSL-4 safety culture promoting worker cohesiveness, trust, respect, and reliability with a balance of worker privacy and public safety. PMID:21361798

Prevalence of latent tuberculosis infection among tuberculosis laboratory workers in Iran.

PubMed

Nasehi, Mahshid; Hashemi-Shahraki, Abdolrazagh; Doosti-Irani, Amin; Sharafi, Saeed; Mostafavi, Ehsan

2017-01-01

The risk of transmission of Mycobacterium tuberculosis from patients to health care workers (HCWs) is a neglected problem in many countries, including Iran. The aim of this study was to estimate the prevalence of latent tuberculosis (TB) infection (LTBI) among TB laboratory staff in Iran, and to elucidate the risk factors associated with LTBI. All TB laboratory staff (689 individuals) employed in the TB laboratories of 50 Iranian universities of medical sciences and a random sample consisting of 317 low-risk HCWs were included in this cross-sectional study. Participants with tuberculin skin test indurations of 10 mm or more were considered to have an LTBI. The prevalence of LTBI among TB laboratory staff and low-risk HCWs was 24.83% (95% confidence interval [CI], 21.31 to 27.74%) and 14.82% (95% CI, 11.31 to 19.20%), respectively. No active TB cases were found in either group. After adjusting for potential confounders, TB laboratory staff were more likely to have an LTBI than low-risk HCWs (prevalence odds ratio, 2.06; 95% CI, 1.35 to 3.17). This study showed that LTBI are an occupational health problem among TB laboratory staff in Iran. This study reinforces the need to design and implement simple, effective, and affordable TB infection control programs in TB laboratories in Iran.

[Analytical quality in biological monitoring of workers exposed to chemicals: experience of the Prevention and Safety at the Workplace Service in Modena].

PubMed

Alpaca, R I Paredes; Migliore, A; Di Rico, R; Canali, Claudia; Rota, Cristina; Trenti, T; Cariani, Elisabetta

2010-01-01

The quality of laboratory data is one of the main factors in guaranteeing efficacy of biological monitoring. To analyze the quality of laboratory data used for biological monitoring of exposed workers. A survey involving 18 companies employing 945 workers in the area of Modena, Italy, was carried out in 2008. Most of the 9 private laboratories receiving biological samples did not perform directly part or all of the laboratory assessments requested, but this was not indicated in the final report. Major problems were observed in the application of internal quality control, and only one laboratory participated in external quality assessment for blood lead measurements. Our results raise major concerns on the traceability and reliability of laboratory assessments performed for biomonitoring of exposed workers. Systematic evaluation of the quality of analytical data would be highly recommendable.

Inventory of the chemicals and the exposure of the workers' skin to these at two leather factories in Indonesia.

PubMed

Febriana, Sri Awalia; Jungbauer, Frank; Soebono, Hardyanto; Coenraads, Pieter-Jan

2012-07-01

Tannery workers are exposed to hazardous chemicals. Tannery work is outsourced to newly industrialized countries (NICs) where attention into occupational health hazards is limited. In this study, we investigated the skin exposure to hazardous chemicals in tannery workers and determined the prevalence of occupational skin diseases (OSDs) at tanneries in a NIC. A cross-sectional study on the observation of the working process and an inventory and risk assessment of the chemicals used. Classification of chemicals as potential sensitizers/irritants and a qualitative assessment of exposure to these chemicals. Workers were examined and interviewed using Nordic Occupational Skin Questionnaire-2002/LONG. The risk of OSDs at the investigated tanneries was mainly related to the exposure of the workers' skin to chemicals in hot and humid environmental conditions. In 472 workers, 12% reported a current OSD and 9% reported a history of OSD. In 10% of all cases, an OSD was confirmed by a dermatologist and 7.4% had an occupational contact dermatitis (OCD). We observed that personal protective equipment (PPE) used was mainly because of skin problems in the past and not as a primary protection against OSD. We observed a high frequency and prolonged exposure to many skin hazardous factors in tannery work although PPE was relatively easily available and which was generally used as a secondary preventative measure. The observed point-prevalence in this study was at the same level as that reported for other high-risk OSDs in Western countries and other tanneries in NICs. However, the observed point-prevalence in this study was lower than that reported in India and Korea. The results of our study and those of other studies at tanneries from other NICs were probably influenced by Healthy Worker Survivor Effect (HWSE).

Safety in the Chemical Laboratory--Chemical Management: A Method for Waste Reduction.

ERIC Educational Resources Information Center

Pine, Stanley H.

1984-01-01

Discusses methods for reducing or eliminating waste disposal problems in the chemistry laboratory, considering both economic and environmental aspects of the problems. Proposes inventory control, shared use, solvent recycling, zero effluent, and various means of disposing of chemicals. (JM)

Laboratory Guide to Instruments, Equipment, and Chemicals, 1971-72.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

This edition of the American Chemical Society laboratory guide is designed to assist the buyers of laboratory supplies and services. The guide contains 40,000 entries and 1,850 product headings presented within these listings: products and services advertised; main dealer location and their branch offices in the southern, northeastern, midwestern,…

VALIDATION GUIDELINES FOR LABORATORIES PERFORMING FORENSIC ANALYSIS OF CHEMICAL TERRORISM

EPA Science Inventory

The Scientific Working Group on Forensic Analysis of Chemical Terrorism (SWGFACT) has developed the following guidelines for laboratories engaged in the forensic analysis of chemical evidence associated with terrorism. This document provides a baseline framework and guidance for...

A software for managing chemical processes in a multi-user laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camino, Fernando E.

Here, we report a software for logging chemical processes in a multi-user laboratory, which implements a work flow designed to reduce hazardous situations associated with the disposal of chemicals in incompatible waste containers. The software allows users to perform only those processes displayed in their list of authorized chemical processes and provides the location and label code of waste containers, among other useful information. The software has been used for six years in the cleanroom of the Center for Functional Nanomaterials at Brookhaven National Laboratory and has been an important factor for the excellent safety record of the Center.

A software for managing chemical processes in a multi-user laboratory

DOE PAGES

Camino, Fernando E.

2016-10-26

Here, we report a software for logging chemical processes in a multi-user laboratory, which implements a work flow designed to reduce hazardous situations associated with the disposal of chemicals in incompatible waste containers. The software allows users to perform only those processes displayed in their list of authorized chemical processes and provides the location and label code of waste containers, among other useful information. The software has been used for six years in the cleanroom of the Center for Functional Nanomaterials at Brookhaven National Laboratory and has been an important factor for the excellent safety record of the Center.

Laboratory safety handbook

USGS Publications Warehouse

Skinner, E.L.; Watterson, C.A.; Chemerys, J.C.

1983-01-01

Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

77 FR 60144 - Manufacturer of Controlled Substances; Notice of Application; Chemic Laboratories, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Chemic Laboratories, Inc. Pursuant to 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on July 26, 2012, Chemic Laboratories, Inc., 480 Neponset Street...

Mortality of aircraft maintenance workers exposed to trichloroethylene and other hydrocarbons and chemicals: extended follow up

PubMed Central

Radican, Larry; Blair, Aaron; Stewart, Patricia; Wartenberg, Daniel

2009-01-01

Objective To extend follow-up of 14,455 workers from 1990 to 2000, and evaluate mortality risk from exposure to trichloroethylene (TCE) and other chemicals. Methods Multivariable Cox models were used to estimate relative risk for exposed vs. unexposed workers based on previously developed exposure surrogates. Results Among TCE exposed workers, there was no statistically significant increased risk of all-cause mortality (RR=1.04) or death from all cancers (RR=1.03). Exposure-response gradients for TCE were relatively flat and did not materially change since 1990. Statistically significant excesses were found for several chemical exposure subgroups and causes, and were generally consistent with the previous follow up. Conclusions Patterns of mortality have not changed substantially since 1990. While positive associations with several cancers were observed, and are consistent with the published literature, interpretation is limited due to the small numbers of events for specific exposures. PMID:19001957

QUALITY ASSURANCE GUIDELINES FOR LABORATORIES PERFORMING FORENSIC ANALYSIS OF CHEMICAL TERRORISM

EPA Science Inventory

The Scientific Working Group on Forensic Analysis of Chemical Terrorism (SWGFACT) has developed the following quality assurance guidelines to provide laboratories engaged in forensic analysis of chemical evidence associated with terrorism a framework to implement a quality assura...

78 FR 4324 - Occupational Exposure to Hazardous Chemicals in Laboratories (Non-Mandatory Appendix); Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... institutions that sponsor chemical laboratories accountable for providing safe working environments. Beyond... current laboratory practices, security, and emergency response, as well as promoting safe handling of.... Safety and training programs have been implemented to promote the safe handling of chemicals from...

Workers' understanding of chemical risks: electroplating case study

PubMed Central

Sadhra, S; Petts, J; McAlpine, S; Pattison, H; MacRae, S

2002-01-01

Background: There is limited research concerning how small companies in particular, respond to health and safety messages. Aims: To understand individuals' knowledge and beliefs about chemical risks and to compare these with those of experts. Methods: The use of chromic acid in particular, and also other chemicals associated with chrome plating were studied. All chromium plating firms were based in the West Midlands. The methodology involved initial face to face interviews (n = 21) with chromium platers, structured questionnaires (n = 84) to test the prevalence of beliefs identified in the interviews, an expert questionnaire, and a workshop to discuss findings. The responses of platers were compared with those of occupational health and safety experts. Results: Although chromium platers appeared to understand the short term adverse effects of the chemicals to which they are exposed, their understanding of long term, or chronic effects appeared to be incomplete. They had good knowledge of acute effects based primarily on experience. Platers were aware of the hazardous nature of the chemicals with which they work, but did not draw distinction between the terms "hazards" and "risks". They had difficulties articulating the effects of the chemicals and how exposure might occur; although it is inappropriate to equate this with lack of knowledge. A significant minority of platers displayed deficiencies in understanding key technical terms used in Safety Data Sheets. Conclusions: This study provides a method which can be used to gain some understanding of workers' knowledge and beliefs about risks that they are exposed to in the workplace. The study also identifies gaps between the platers' knowledge and beliefs and those of experts. New risk information needs to be designed which addresses the information needs of platers using language that they understand. PMID:12356930

Hospitality workers' attitudes and exposure to secondhand smoke, hazardous chemicals, and working conditions.

PubMed

Pearson, Dave; Angulo, Antoinette; Bourcier, Emily; Freeman, Elizabeth; Valdez, Roger

2007-01-01

Compelling reasons exist for labor and public health to collaborate. For example, compared to white-collar workers, blue-collar and service workers are much more likely to be targeted by the tobacco industry and become smokers. The purpose of this descriptive study was to assess if there were ways public health and labor could collaborate to document the health attitudes and needs of hospitality industry workers. Eligible union members were identified through an electronic enrollment file consisting of 3,659 names maintained by the union. The mail survey instrument covered exposure to secondhand smoke, exposure to hazardous chemicals and materials, time pressure and job demands, and work-related pain/disability. Additional questions related to age, gender, race/ethnicity, level of education, employment history, English proficiency, and self-reported health status. Study results demonstrated that important health information could be successfully collected on unionized workers. Survey data showed that union members were a very diverse group who were exposed to secondhand smoke and supported working in clean-air settings. Workers, especially housekeeping staff, characterized their work as being chaotic and demanding, while almost half of workers reported work-related pain. Key to the successful collaboration was establishing trust between the parties and emphasizing data collection that served the information needs of both organizations. Opportunities exist to improve the health and working conditions of this population. Health interventions need to be designed to take into consideration the very diverse, mostly female, and limited English proficiency of this group of workers.

Demographic determinants of chemical safety information recall in workers and consumers in South Africa: A cross sectional study.

PubMed

Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea; London, Leslie

2017-12-01

Chemical hazard communication is intended to alert users of the potential hazards of chemicals. Hazard information needs to be understood and recalled. Recall of hazard communication is critical when the written form of the information is not available at the time it is required. A cross-sectional study investigating associations between recall of chemical safety information on labels amongst 402 participants including 315 workers and 87 consumers in two provinces of South Africa. Respondents were predominantly male (67.7%), the median age was 37 years (IQR: 30-46years) and less than half of the participants completed high school (47.5%). Multivariate analysis identified the following positive associations with the recall of all the label elements listing the strongest association: call appropriate services and industrial vs consumer sector (OR=2.4; 95% CI: 1.2; 4.6 ); call appropriate services and transport vs consumer sector (OR=4.4; 95% CI: 1.2; 16.0); flammable symbol and male vs female gender (OR=2.3; 95% CI: 1.0; 5.3); flammable symbol and home language English vs African languages (OR=6.6; 95% CI: 2.1; 21.2); any hazard statement and home language Afrikaans vs African languages (OR=14.0; 95% CI: 3.6; 54.2), any first aid statement and further education vs none (OR=3.3; 95% CI: 1.3; 8.0), correct chemical name and industry blue collar workers vs non-industry blue collar workers (OR=2.6; 95% CI: 1.1; 6.1), correct chemical name and non-industry white collar occupations vs non-industry blue collar workers (OR=2.7; 95% CI: 1.0; 7.1). The study found a number of potential positive associations which influence recall of label elements of which some (e.g., sector, gender, occupation) suggest further research. Relevant policies in South Africa should ensure that the safety information on chemical labels is clearly visible to read and understandable which aids recall and the reduction in harmful chemical exposures. Copyright © 2017 National Safety Council and

[Changes in functional state during occupational activities in workers at objects for chemical weapons destruction].

PubMed

2010-01-01

The authors studied functional state before and after the working shift in workers at objects for chemical weapons destruction, analyzed changes in central and peripheral hemodynamics parameters, vegetative regulation of heart rhythm, stabilographic and psychophysiologic values.

Exposure to hazardous substances in a standard molecular biology laboratory environment: evaluation of exposures in IARC laboratories.

PubMed

Chapot, Brigitte; Secretan, Béatrice; Robert, Annie; Hainaut, Pierre

2009-07-01

Working in a molecular biology laboratory environment implies regular exposure to a wide range of hazardous substances. Several recent studies have shown that laboratory workers may have an elevated risk of certain cancers. Data on the nature and frequency of exposures in such settings are scanty. The frequency of use of 163 agents by staff working in molecular biology laboratories was evaluated over a period of 4 years by self-administered questionnaire. Of the agents listed, ethanol was used by the largest proportion of staff (70%), followed by ethidium bromide (55%). Individual patterns of use showed three patterns, namely (i) frequent use of a narrow range of products, (ii) occasional use of a wide range of products, and (iii) frequent and occasional use of an intermediate range of products. Among known or suspected carcinogens (International Agency for Research on Cancer Group 1 and 2A, respectively), those most frequently used included formaldehyde (17%), oncogenic viruses (4%), and acrylamide (32%). The type of exposure encountered in research laboratories is extremely diverse. Few carcinogenic agents are used frequently but many laboratory workers may be exposed occasionally to known human carcinogens. In addition, many of the chemicals handled by staff represent a health hazard. The results enabled the staff physician to develop an individual approach to medical surveillance and to draw a personal history of occupational exposures for laboratory staff.

Grand rounds: an outbreak of toxic hepatitis among industrial waste disposal workers.

PubMed

Cheong, Hae-Kwan; Kim, Eun A; Choi, Jung-Keun; Choi, Sung-Bong; Suh, Jeong-Ill; Choi, Dae Seob; Kim, Jung Ran

2007-01-01

Industrial waste (which is composed of various toxic chemicals), changes to the disposal process, and addition of chemicals should all be monitored and controlled carefully in the industrial waste industry to reduce the health hazard to workers. Five workers in an industrial waste plant developed acute toxic hepatitis, one of whom died after 3 months due to fulminant hepatitis. In the plant, we detected several chemicals with hepatotoxic potential, including pyridine, dimethylformamide, dimethylacetamide, and methylenedianiline. The workers had been working in the high-vapor-generating area of the plant, and the findings of pathologic examination showed typical features of acute toxic hepatitis. Infectious hepatitis and drug-induced hepatitis were excluded by laboratory findings, as well as the clinical course of hepatitis. All cases of toxic hepatitis in this plant developed after the change of the disposal process to thermochemical reaction-type treatment using unslaked lime reacted with industrial wastes. During this chemical reaction, vapor containing several toxic materials was generated. Although we could not confirm the definitive causative chemical, we suspect that these cases of hepatitis were caused by one of the hepatotoxic agents or by a synergistic interaction among several of them. In the industrial waste treatment process, the danger of developing toxic hepatitis should be kept in mind, because any subtle change of the treatment process can generate various toxic materials and threaten the workers' health. A mixture of hepatotoxic chemicals can induce clinical manifestations that are quite different from those predicted by the toxic property of a single agent.

Guidelines for the identification of unknown samples for laboratories performing forensic analyses for chemical terrorism.

PubMed

Magnuson, Matthew L; Satzger, R Duane; Alcaraz, Armando; Brewer, Jason; Fetterolf, Dean; Harper, Martin; Hrynchuk, Ronald; McNally, Mary F; Montgomery, Madeline; Nottingham, Eric; Peterson, James; Rickenbach, Michael; Seidel, Jimmy L; Wolnik, Karen

2012-05-01

Since the early 1990s, the FBI Laboratory has sponsored Scientific Working Groups to improve discipline practices and build consensus among the forensic community. The Scientific Working Group on the Forensic Analysis of Chemical, Biological, Radiological and Nuclear Terrorism developed guidance, contained in this document, on issues forensic laboratories encounter when accepting and analyzing unknown samples associated with chemical terrorism, including laboratory capabilities and analytical testing plans. In the context of forensic analysis of chemical terrorism, this guidance defines an unknown sample and addresses what constitutes definitive and tentative identification. Laboratory safety, reporting issues, and postreporting considerations are also discussed. Utilization of these guidelines, as part of planning for forensic analysis related to a chemical terrorism incident, may help avoid unfortunate consequences not only to the public but also to the laboratory personnel. 2011 American Academy of Forensic Sciences. Published 2011. This article is a U.S. Government work and is in the public domain in the U.S.A.

Exploring Chemical Equilibrium with Poker Chips: A General Chemistry Laboratory Exercise

ERIC Educational Resources Information Center

Bindel, Thomas H.

2012-01-01

A hands-on laboratory exercise at the general chemistry level introduces students to chemical equilibrium through a simulation that uses poker chips and rate equations. More specifically, the exercise allows students to explore reaction tables, dynamic chemical equilibrium, equilibrium constant expressions, and the equilibrium constant based on…

76 FR 72216 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... by developing a written Chemical Hygiene Plan (CHP) that describes standard operating procedures for...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in Laboratories (29 CFR...

Emissions into the Air from Bitumen and Rubber Bitumen-Implications for Asphalt Workers' Exposure.

PubMed

Nilsson, Patrik T; Bergendorf, Ulf; Tinnerberg, Håkan; Nordin, Erik; Gustavsson, Mats; Strandberg, Bo; Albin, Maria; Gudmundsson, Anders

2018-06-21

The risk among asphalt workers of developing adverse health effects may increase due to their occupational exposure. One area of special concern arises when rubber granules are mixed into bitumen to enhance asphalt properties. This research characterizes and compares bitumen and rubber bitumen regarding the emissions of and workers' exposure to particulates, polycyclic aromatic hydrocarbons (PAHs) and benzothiazole. A laboratory and a field study were carried out. In the laboratory, two types of bitumen, one with and one without rubber, were heated up to two temperatures (140°C and 160°C). The concentrations and chemical compositions of the emissions were determined. In the field at asphalt work sites, both emissions and worker exposure measurements were performed. The methods applied included direct-reading sampling techniques next to the asphalt work area and personal sampling techniques on asphalt workers. The exposure measurements on asphalt workers for respirable dust, total dust, particle number and mass, and total PAH concentrations showed similar concentrations when both standard and rubber bitumen were used. The asphalt-surfacing machine operators were the workers with the highest observed exposure followed by the screed operators and roller drivers. Both laboratory and field measurements showed higher concentrations of benzothiazole when rubber bitumen was used, up to 7.5 times higher in the laboratory. The levels of naphthalene, benzo(a)pyrene, and total particles were lower for both types compared with the Swedish occupational exposure limits, 8-h time weighted average concentrations. Benzo(a)pyrene exceeded however the health-based guideline value given by the WHO for both types of bitumen. The study concludes that several air pollutants such as benzothiazole and PAHs are emitted into the air during asphalt work, but it is not evident if exposure to rubber bitumen possesses a higher risk than exposure to standard bitumen in terms of asphalt worker

Evaluation of chemical-specific IgG antibodies in male workers from a urethane foam factory.

PubMed

Tsuji, Mayumi; Ishihara, Yasuhiro; Isse, Toyohi; Koriyama, Chihaya; Yamamoto, Megumi; Kakiuchi, Noriaki; Yu, Hsu-Sheng; Tanaka, Masayuki; Tsuchiya, Takuto; Ohta, Masanori; Tanaka, Rie; Kawamoto, Toshihiro

2018-06-19

Plastic resins are complex chemicals that contain toluene diisocyanate (TDI) and/or trimellitic anhydride (TMA), which cause occupational allergies (OA), including respiratory allergies. Serum IgGs against TDI and TMA have been suggested as potential markers of the exposure status and as exploring cause of OA. Although TDI-specific IgG has been examined for suspected OA, TMA-specific IgG is not commonly evaluated in a urethane foam factory. This study therefore investigated both TDI- and TMA-specific IgGs in suspected OA patients and to evaluate the usefulness of the measurement of multiple chemical-specific IgG measurement for practical monitoring. Blood samples were collected from two male workers who developed respiratory allergies supposedly caused by occupational exposure to TDI and/or TMA for the presence of TDI- and TMA-specific IgGs. In addition, blood samples from 75 male workers from a urethane foam factory, along with 87 male control subjects, were collected in 2014 and tested for the same IgGs in 2014. The presence and levels of TDI- and TMA-specific serum IgGs were measured using dot blot assays. We found that controls had mean concentrations of TDI- and TMA-specific IgGs of 0.98 and 2.10 μg/mL, respectively. In the two workers with respiratory allergies, the TDI-specific IgG concentrations were 15.6 and 9.51 μg/mL, and TMA-specific IgG concentrations were 4.56 and 14.4 μg/mL, which are clearly higher than those in controls. Mean concentrations of TDI- and TMA-specific IgGs in the factory workers were 1.89 and 2.41 μg/mL, respectively, and are significantly higher than those of the controls (P < 0.001 and P < 0.026 for TDI- and TMA-specific IgGs, respectively). The workers suspected of OA showed an evidently high level of TDI- and TMA-specific IgG, and these levels in workers at the urethane foam factory were also significantly higher than those in controls. In conclusion, the measurement of TDI- and TMA-specific IgG among workers using

Facility-specific radiation exposure risks and their implications for radiation workers at Department of Energy laboratories

NASA Astrophysics Data System (ADS)

Davis, Adam Christopher

This research develops a new framework for evaluating the occupational risks of exposure to hazardous substances in any setting where As Low As Reasonably Achievable (ALARA) practices are mandated or used. The evaluation is performed by developing a hypothesis-test-based procedure for evaluating the homogeneity of various epidemiological cohorts, and thus the appropriateness of the application of aggregate data-pooling techniques to those cohorts. A statistical methodology is then developed as an alternative to aggregate pooling for situations in which individual cohorts show heterogeneity between them and are thus unsuitable for pooled analysis. These methods are then applied to estimate the all-cancer mortality risks incurred by workers at four Department-of-Energy nuclear weapons laboratories. Both linear, no-threshold and dose-bin averaged risks are calculated and it is further shown that aggregate analysis tends to overestimate the risks with respect to those calculated by the methods developed in this work. The risk estimates developed in Chapter 2 are, in Chapter 3, applied to assess the risks to workers engaged in americium recovery operations at Los Alamos National Laboratory. The work described in Chapter 3 develops a full radiological protection assessment for the new americium recovery project, including development of exposure cases, creation and modification of MCNP5 models, development of a time-and-motion study, and the final synthesis of all data. This work also develops a new risk-based method of determining whether administrative controls, such as staffing increases, are ALARA-optimized. The EPA's estimate of the value of statistical life is applied to these risk estimates to determine a monetary value for risk. The rate of change of this "risk value" (marginal risk) is then compared with the rate of change of workers' compensations as additional workers are added to the project to reduce the dose (and therefore, presumably, risk) to each

An Annotated Bibliography of the Literature Dealing With the Hazardous Chemicals Used in the Chemistry Laboratory.

ERIC Educational Resources Information Center

Chaney, Donna J.

On the premise that many laboratory instructors lack knowledge about chemical toxicity, this study investigated three areas: (1) chemicals used in the academic laboratory which pose a health hazard; (2) ways of reducing toxicity in the laboratory (with attention to the apparent lack of teacher training which contributes to the cause of the problem…

Awareness and practice of safety precautions among healthcare workers in the laboratories of two public health facilities in Nigeria.

PubMed

Fadeyi, A; Fowotade, A; Abiodun, M O; Jimoh, A K; Nwabuisi, C; Desalu, O O

2011-06-01

To determine the level of awareness and practice of SP among laboratory workers at two tertiary public health facilities in Nigeria. A semi-structured, self-administered questionnaire was used to assess the awareness, attitude and adherence to SP among laboratory workers. Information on the availability of safety equipment was also sought. The laboratory safety practice of respondents was assessed based on self-reported observance of basic principles of universal precautions in clinical settings. Study participants were 130, mean age: 28.2 years (SD±6.6), number of years in hospital employment: 3.7 years (SD±2.4) and the male to female ratio was 1.8:1. Many (41.5%) were unaware and 25.4% do not observe SP. Participants attest to availability of various safety devices and equipment including hand gloves (86.2%), disinfectants (84.6%), HBV immunisation (46.2%) and post exposure prophylaxis (PEP) for HIV and HBV (79.6%). Attitude to safety is unsatisfactory as 60.0% eat and drink in the laboratory, 50.8% recap needles and 56.9% use sharps box. Even though 83.1% are willing to take PEP, only 1.5% will present self following laboratory injury. This study shows the deficit in the awareness of SP among laboratory personnel and demonstrates that attitude and practice of safety rules are unsatisfactory. Training and re-training on SP is therefore desired. Counselling to induce a positive attitudinal change on HBV immunisation and PEP is similarly necessary.

Review of laboratory-based terrestrial bioaccumulation assessment approaches for organic chemicals: Current status and future possibilities.

PubMed

Hoke, Robert; Huggett, Duane; Brasfield, Sandra; Brown, Becky; Embry, Michelle; Fairbrother, Anne; Kivi, Michelle; Paumen, Miriam Leon; Prosser, Ryan; Salvito, Dan; Scroggins, Rick

2016-01-01

In the last decade, interest has been renewed in approaches for the assessment of the bioaccumulation potential of chemicals, principally driven by the need to evaluate large numbers of chemicals as part of new chemical legislation, while reducing vertebrate test organism use called for in animal welfare legislation. This renewed interest has inspired research activities and advances in bioaccumulation science for neutral organic chemicals in aquatic environments. In January 2013, ILSI Health and Environmental Sciences Institute convened experts to identify the state of the science and existing shortcomings in terrestrial bioaccumulation assessment of neutral organic chemicals. Potential modifications to existing laboratory methods were identified, including areas in which new laboratory approaches or test methods could be developed to address terrestrial bioaccumulation. The utility of "non-ecotoxicity" data (e.g., mammalian laboratory data) was also discussed. The highlights of the workshop discussions are presented along with potential modifications in laboratory approaches and new test guidelines that could be used for assessing the bioaccumulation of chemicals in terrestrial organisms. © 2015 SETAC.

Chemical and Biological Mobile Laboratory: infrastructure employed by Brazilian Army in emergency response actions

NASA Astrophysics Data System (ADS)

Cardozo, M.; Oliveira, V. G. M.; Sousa, R. B.; de Paula, R. L.

2018-03-01

The Brazilian Army specified and acquired a mobile chemical and biological laboratory in order to confirm in a fast and mobile way with more precise analytical techniques the information obtained by the emergency responders field teams. The laboratory was designed for displacement in different scenarios of the national territory. This paper describes the laboratorial structure, the material flow and the deployment of this defense product in the major international events occurred in Brazil from 2011 to 2016, with the objective of providing in situ identification of chemical and biological threats.

Safety in the Chemical Laboratory: Procedures for Laboratory Destruction of Chemicals.

ERIC Educational Resources Information Center

McKusick, Blaine C.

1984-01-01

Discusses a National Research Council report which summarizes what laboratories need to know about Environmental Protection Agency and Department of Transportation regulations that apply to laboratory waste. The report provides guidelines for establishing and operating waste management systems for laboratories and gives specific advice on waste…

Mortality and cancer incidence of aircraft maintenance workers exposed to trichloroethylene and other organic solvents and chemicals: extended follow up

PubMed Central

Blair, A.; Hartge, P.; Stewart, P. A.; McAdams, M.; Lubin, J.

1998-01-01

OBJECTIVES: To extend the follow up of a cohort of 14,457 aircraft maintenance workers to the end of 1990 to evaluate cancer risks from potential exposure to trichloroethylene and other chemicals. METHODS: The cohort comprised civilians employed for at least one year between 1952 and 1956, of whom 5727 had died by 31 December 1990. Analyses compared the mortality of the cohort with the general population of Utah and the mortality and cancer incidence of exposed workers with those unexposed to chemicals, while adjusting for age, sex and calendar time. RESULTS: In the combined follow up period (1952-90), mortality from all causes and all cancer was close to expected (standardised mortality ratios (SMRs) 97 and 96, respectively). Significant excesses occurred for ischaemic heart disease (SMR 108), asthma (SMR 160), and cancer of the bone (SMR 227), whereas significant deficits occurred for cerebrovascular disease (SMR 88), accidents (SMR 70), and cancer of the central nervous system (SMR 64). Workers exposed to trichloroethylene showed non-significant excesses for non-Hodgkin's lymphoma (relative risk (RR) 2.0), and cancers of the oesophagus (RR 5.6), colon (RR 1.4), primary liver (RR 1.7), breast (RR 1.8), cervix (RR 1.8), kidney (RR 1.6), and bone (RR 2.1). None of these cancers showed an exposure- response gradient and RRs among workers exposed to other chemicals but not trichloroethylene often had RRs as large as workers exposed to trichloroethylene. Workers exposed to solvents other than trichloroethylene had slightly increased mortality from asthma, non- Hodgkin's lymphoma, multiple myeloma, and breast cancer. CONCLUSION: These findings do not strongly support a causal link with trichloroethylene because the associations were not significant, not clearly dose-related, and inconsistent between men and women. Because findings from experimental investigations and other epidemiological studies on solvents other than trichloroethylene provide some biological

Wage increases in the clinical laboratory: how are workers faring against inflation and in comparison to other health professions?

PubMed

Chapman, Susan A; McClory, Vasey; Ward-Cook, Kory

2005-07-26

High vacancy rates in the clinical laboratory profession have led to the use of wage increases and financial incentives to attract and retain workers. American Society for Clinical Pathology (ASCP) surveys indicate that wages for Medical Technologists and Medical Laboratory Technicians have been steadily rising in the past few years following years of little or no increases. When adjusted for inflation, the real wage increases have even modestly exceeded the inflation rate. However, wages in the clinical laboratory remain lower than in several other allied health professions with comparable educational preparation. Achieving competitive wages will be important in addressing the long-term need to attract more students to the clinical laboratory.

Workers' Exposure to Nano-Objects with Different Dimensionalities in R&D Laboratories: Measurement Strategy and Field Studies.

PubMed

Boccuni, Fabio; Ferrante, Riccardo; Tombolini, Francesca; Lega, Daniela; Antonini, Alessandra; Alvino, Antonello; Pingue, Pasqualantonio; Beltram, Fabio; Sorba, Lucia; Piazza, Vincenzo; Gemmi, Mauro; Porcari, Andrea; Iavicoli, Sergio

2018-01-24

With the increasing interest in the potential benefits of nanotechnologies, concern is still growing that they may present emerging risks for workers. Various strategies have been developed to assess the exposure to nano-objects and their agglomerates and aggregates (NOAA) in the workplace, integrating different aerosol measurement instruments and taking into account multiple parameters that may influence NOAA toxicity. The present study proposes a multi-metric approach for measuring and sampling NOAA in the workplace, applied to three case studies in laboratories each dedicated to materials with different shapes and dimensionalities: graphene, nanowires, and nanoparticles. The study is part of a larger project with the aim of improving risk management tools in nanomaterials research laboratories. The harmonized methodology proposed by the Organization for Economic Cooperation and Development (OECD) has been applied, including information gathering about materials and processes, measurements with easy-to-use and hand-held real-time devices, air sampling with personal samplers, and off-line analysis using scanning electron microscopy. Significant values beyond which an emission can be attributed to the NOAA production process were identified by comparison of the particle number concentration (PNC) time series and the corresponding background levels in the three laboratories. We explored the relations between background PNC and microclimatic parameters. Morphological and elemental analysis of sampled filters was done to identify possible emission sources of NOAA during the production processes: rare particles, spherical, with average diameter similar to the produced NOAA were identified in the nanoparticles laboratory, so further investigation is recommended to confirm the potential for worker exposure. In conclusion, the information obtained should provide a valuable basis for improving risk management strategies in the laboratory at work.

Enhancing Chemical Inventory Management in Laboratory through a Mobile-Based QR Code Tag

NASA Astrophysics Data System (ADS)

Shukran, M. A. M.; Ishak, M. S.; Abdullah, M. N.

2017-08-01

The demand for a greater inventory management system which can provide a lot of useful information from a single scan has made laboratory inventory management using barcode technology more difficult. Since the barcode technology lacks the ability to overcome the problem and is not capable of providing information needed to manage the chemicals in the laboratory, thus employing a QR code technology is the best solution. In this research, the main idea is to develop a standalone application running with its own database that is periodically synchronized with the inventory software hosted by the computer and connected to a specialized network as well. The first process required to establish this centralized system is to determine all inventory available in the chemical laboratory by referring to the documented data in order to develop the database. Several customization and enhancement were made to the open source QR code technology to ensure the developed application is dedicated for its main purposes. As the end of the research, it was proven that the system is able to track the position of all inventory and showing real time information about the scanned chemical labels. This paper intends to give an overview about the QR tag inventory system that was developed and its implementation at the National Defence University of Malaysia’s (NDUM) chemical laboratory.

Drake Chemical Workers' Health Registry: coping with community tension over toxic exposures.

PubMed Central

Leviton, L C; Marsh, G M; Talbott, E; Pavlock, D; Callahan, C

1991-01-01

BACKGROUND: Programs to communicate health risk information and to protect the health of groups exposed to toxic substances need to tailor interventions to the political, economic, and cultural situation of the at-risk group. In particular, such programs must often cope with exceptional community tension and conflict over these exposures. METHODS: This article uses interviews and written materials to document and describe the state of affairs that led up to community tension over an occupational exposure to a bladder carcinogen. The article describes the planning and design of a program to provide medical surveillance to workers, which also alleviated community concern. RESULTS: The Drake Chemical Workers' Health Registry coped successfully with community conflict and obtained a high participation rate. CONCLUSIONS: General recommendations include the following: avoid identification with extraneous agendas; know the community and maintain communication; and match the intervention to the evolution of the community conflict. PMID:2029036

New Laboratory Course for Senior-Level Chemical Engineering Students

ERIC Educational Resources Information Center

Aronson, Mark T.; Deitcher, Robert W.; Xi, Yuanzhou; Davis, Robert J.

2009-01-01

A new laboratory course has been developed at the University of Virginia for senior- level chemical engineering students. The new course is based on three 4-week long experiments in bioprocess engineering, energy conversion and catalysis, and polymer synthesis and characterization. The emphasis is on the integration of process steps and the…

Survey of safety practices among hospital laboratories in Oromia Regional State, Ethiopia.

PubMed

Sewunet, Tsegaye; Kebede, Wakjira; Wondafrash, Beyene; Workalemau, Bereket; Abebe, Gemeda

2014-10-01

Unsafe working practices, working environments, disposable waste products, and chemicals in clinical laboratories contribute to infectious and non-infectious hazards. Staffs, the community, and patients are less safe. Furthermore, such practices compromise the quality of laboratory services. We conducted a study to describe safety practices in public hospital laboratories of Oromia Regional State, Ethiopia. Randomly selected ten public hospital laboratories in Oromia Regional State were studied from Oct 2011- Feb 2012. Self-administered structured questionnaire and observation checklists were used for data collection. The respondents were heads of the laboratories, senior technicians, and safety officers. The questionnaire addressed biosafety label, microbial hazards, chemical hazards, physical/mechanical hazards, personal protective equipment, first aid kits and waste disposal system. The data was analyzed using descriptive analysis with SPSS version16 statistical software. All of the respondents reported none of the hospital laboratories were labeled with the appropriate safety label and safety symbols. These respondents also reported they may contain organisms grouped under risk group IV in the absence of microbiological safety cabinets. Overall, the respondents reported that there were poor safety regulations or standards in their laboratories. There were higher risks of microbial, chemical and physical/mechanical hazards. Laboratory safety in public hospitals of Oromia Regional State is below the standard. The laboratory workers are at high risk of combined physical, chemical and microbial hazards. Prompt recognition of the problem and immediate action is mandatory to ensure safe working environment in health laboratories.

75 FR 15675 - Professional Research Experience Program in Chemical Science and Technology Laboratory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... in physics, chemistry, mathematics, computer science, or engineering. Institutions should have a 4..., mathematics, computer science, or engineering with work experiences in laboratories or other settings...-0141-01] Professional Research Experience Program in Chemical Science and Technology Laboratory...

Chemistry as the defining science: discipline and training in nineteenth-century chemical laboratories.

PubMed

Jackson, Catherine M

2011-06-01

The institutional revolution has become a major landmark of late-nineteenth century science, marking the rapid construction of large, institutional laboratories which transformed scientific training and practice. Although it has served historians of physics well, the institutional revolution has proved much more contentious in the case of chemistry. I use published sources, mainly written by chemists and largely focused on laboratories built in German-speaking lands between about 1865 and 1900, to show that chemical laboratory design was inextricably linked to productive practice, large-scale pedagogy and disciplinary management. I argue that effective management of the novel risks inherent in teaching and doing organic synthesis was significant in driving and shaping the construction of late-nineteenth century institutional chemical laboratories, and that these laboratories were essential to the disciplinary development of chemistry. Seen in this way, the laboratory necessarily becomes part of the material culture of late-nineteenth century chemistry, and I show how this view leads not only to a revision of what is usually known as the laboratory revolution in chemistry but also to a new interpretation of the institutional revolution in physics. Copyright © 2011 Elsevier Ltd. All rights reserved.

Variations in hospital worker perceptions of safety culture.

PubMed

Listyowardojo, Tita Alissa; Nap, Raoul E; Johnson, Addie

2012-02-01

To compare the attitudes toward and perceptions of institutional practices that can influence patient safety between all professional groups at a university medical center. A questionnaire measuring nine dimensions of organizational and safety culture was distributed to all hospital workers. Each item was rated on a 1 ('strongly disagree') to 5 ('strongly agree') scale. Professionals (2995), grouped as 'physicians' (16.6%), 'nurses' (40.3%), 'clinical workers' (e.g. psychologists; 21.7%), 'laboratory workers' (e.g. technicians; 11%) and 'non-medical workers' (e.g. managers; 10.4%). One-way analysis of variances (ANOVAs) carried out separately on each dimension with professional group as the independent variable of interest. Differences in ratings of organizational and safety culture were found across professional groups. Physicians and non-medical workers tended to rate the dimensions of organizational and safety culture more positively than did nurses, clinical workers and laboratory workers. For example, physicians gave more positive ratings of 'institutional commitment to safety' than did nurses, clinical workers and laboratory workers (mean = 3.71 vs. 3.62, 3.61 and 3.58, respectively, P < 0.01) and non-medical workers gave more positive ratings than did physicians, nurses, clinical workers and laboratory workers to 'perceptions towards the hospital' (mean = 3.69 vs. 3.39, 3.36, 3.49 and 3.47, respectively, P < 0.001). Interventions to promote safety culture should be tailored to the target group as attitudes and perceptions may differ among groups.

Worker Protection: Notifying Workers at Risk of Occupational Disease

DTIC Science & Technology

1987-05-11

on legislative proposals to establish a federal health risk notification program for workers exposed to hazardous substances. Under such a program the... employee populations and individuals found to be at risk, and (3) provide medical and support information and services to notified workers .) Similar...chemicals be evaluated and information about the hazards be made available to workers in the manufacturing industry. Labor’s Occupational Safety and Health

Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development

DTIC Science & Technology

2017-09-29

Filter Standards Development September 29, 2017 Approved for public release; distribution is unlimited. Thomas E. suTTo Materials and Systems Branch...LIMITATION OF ABSTRACT Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development Thomas E. Sutto Naval Research...approach, developed by NRL, is tested by examining the filter behavior against a number of chemicals to determine if the NRL approach resulted in the

76 FR 67228 - EMD Chemicals, Inc. Including On-Site Independent Contractors and Leased Workers From Ajilen...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... Personnel, J&J Staffing, Accountemps/Robert Half, EMD Temps, Chromhelp, and Greentree Food Management... subject firm. The company reports that independent contract workers from Greentree Food Management were... Greentree Food Management working on-site at EMD Chemicals, Inc., Gibbstown, New Jersey. The amended notice...

High-Performance Liquid Chromatography in the Undergraduate Chemical Engineering Laboratory

ERIC Educational Resources Information Center

Frey, Douglas D.; Guo, Hui; Karnik, Nikhila

2013-01-01

This article describes the assembly of a simple, low-cost, high-performance liquid chromatography (HPLC) system and its use in the undergraduate chemical engineering laboratory course to perform simple experiments. By interpreting the results from these experiments students are able to gain significant experience in the general method of…

An Internet-Based Distributed Laboratory for Interactive Chemical Engineering Education

ERIC Educational Resources Information Center

Guo, Jing; Kettler, David J.; Al-Dahhan, Muthanna

2007-01-01

A common undergraduate chemical engineering experiment has been modified for on-line operation over the Internet. By adopting rapidly changing Internet and object component technologies, we developed a novel approach combining the Internet and regular laboratory equipment. The client-server applications use a Visual Basic and Labtech programming…

Trust in training: the Oil, Chemical, and Atomic Workers International Union Worker-to-Worker Training Program.

PubMed

Merrill, M

1994-01-01

The OCAW's Worker-to-Worker Training Program was established with one of the first grants awarded under the Superfund Amendments and Reauthorization Act of 1986. The union intended the program to serve as a model to industry and to raise the standard of safety and health training throughout the industry. The program, which requires trainees to actively participate in learning activities, has garnered praise from its participants.

Worker-Directed Training.

ERIC Educational Resources Information Center

Wagner, Stacey

2001-01-01

Describes the training at the Idaho National Engineering and Environmental Laboratory, the foremost nuclear energy and environmental laboratory in the United States. Suggests that the key to assurance is getting workers, most of whom are unionized, involved in their own safety training. (JOW)

Evolved stars as complex chemical laboratories - the quest for gaseous chemistry

NASA Astrophysics Data System (ADS)

Katrien Els Decin, Leen

2015-08-01

At the end of their life, most stars lose a large fraction of their mass through a stellar wind. The stellar winds of evolved (super)giant stars are the dominant suppliers for the pristine building blocks of the interstellar medium (ISM). Crucial to the understanding of the chemical life cycle of the ISM is hence a profound insight in the chemical and physical structure governing these stellar winds.These winds are really unique chemical laboratories in which currently more than 70 different molecules and 15 different dust species are detected. Several chemical processes such as neutral-neutral and ion-molecule gas-phase reactions, dust nucleation and growth, and photo-processes determine the chemical content of these winds. However, gas-phase and dust-nucleation chemistry for astronomical environments still faces many challenges. One should realize that only ˜15% of the rate coefficients for gas-phase reactions considered to occur in (inter/circum)stellar regions at temperatures (T) below 300K have been subject to direct laboratory determinations and that the temperature dependence of the rate constants is often not known; only ˜2% have rate constants at T<200K and less than 0.5% at T<100 K. For stellar wind models, an important bottleneck occurs among the reactions involving silicon- and sulfur-bearing species, for which only a few have documented reaction rates. Often, researchers are implementing ‘educated guesses’ for these unknown rates, sometimes forcing the network to yield predictions concurring with (astronomical) observations. Large uncertainties are inherent in this type of ‘optimized’ chemical schemes.Thanks to an ERC-CoG grant, we are now in the position to solve some riddles involved in understanding the gas-phase chemistry in evolved stars. In this presentation, I will demonstrate the need for accurate temperature-dependent gas-phase reaction rate constants and will present our new laboratory equipment built to measure the rate constants

Safety in the Chemical Laboratory. Chemical Laboratory Safety: The Academic Anomaly.

ERIC Educational Resources Information Center

Bretherick, Leslie

1990-01-01

Discussed are accidents that occur in the laboratories of highly trained chemists. Four examples are provided to illustrate potential hazards that are often overlooked in chemistry laboratories, molten inorganic salt baths, the reaction of acetone and hydrogen peroxide, halogenated acetylene compounds, and the reaction of hydrogen peroxide and…

An efficient laboratory workflow for environmental risk assessment of organic chemicals.

PubMed

Zhu, Linyan; Santiago-Schübel, Beatrix; Xiao, Hongxia; Thiele, Björn; Zhu, Zhiliang; Qiu, Yanling; Hollert, Henner; Küppers, Stephan

2015-07-01

In this study, we demonstrate a fast and efficient workflow to investigate the transformation mechanism of organic chemicals and evaluate the toxicity of their transformation products (TPs) in laboratory scale. The transformation process of organic chemicals was first simulated by electrochemistry coupled online to mass spectrometry (EC-MS). The simulated reactions were scaled up in a batch EC reactor to receive larger amounts of a reaction mixture. The mixture sample was purified and concentrated by solid phase extraction (SPE) for the further ecotoxicological testing. The combined toxicity of the reaction mixture was evaluated in fish egg test (FET) (Danio rerio) compared to the parent compound. The workflow was verified with carbamazepine (CBZ). By using EC-MS seven primary TPs of CBZ were identified; the degradation mechanism was elucidated and confirmed by comparison to literature. The reaction mixture and one primary product (acridine) showed higher ecotoxicity in fish egg assay with 96 h EC50 values of 1.6 and 1.0 mg L(-1) than CBZ with the value of 60.8 mg L(-1). The results highlight the importance of transformation mechanism study and toxicological effect evaluation for organic chemicals brought into the environment since transformation of them may increase the toxicity. The developed process contributes a fast and efficient laboratory method for the risk assessment of organic chemicals and their TPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Exposure to high endotoxin concentration increases wheezing prevalence among laboratory animal workers: a cross-sectional study.

PubMed

Freitas, Amanda Souza; Simoneti, Christian Silva; Ferraz, Erica; Bagatin, Ericson; Brandão, Izaira Tincani; Silva, Celio Lopes; Borges, Marcos Carvalho; Vianna, Elcio Oliveira

2016-05-06

Endotoxin from Gram-negative bacteria are found in different concentrations in dust and on the ground of laboratories dealing with small animals and animal houses. Cross-sectional study performed in workplaces of two universities. Dust samples were collected from laboratories and animal facilities housing rats, mice, guinea pigs, rabbits or hamsters and analyzed by the "Limulus amebocyte lysate" (LAL) method. We also sampled workplaces without animals. The concentrations of endotoxin detected in the workplaces were tested for association with wheezing in the last 12 months, asthma defined by self-reported diagnosis and asthma confirmed by bronchial hyperresponsiveness (BHR) to mannitol. Dust samples were obtained at 145 workplaces, 92 with exposure to animals and 53 with no exposure. Exposed group comprised 412 subjects and non-exposed group comprised 339 subjects. Animal-exposed workplaces had higher concentrations of endotoxin, median of 34.2 endotoxin units (EU) per mg of dust (interquartile range, 12.6-65.4), as compared to the non-exposed group, median of 10.2 EU/mg of dust (interquartile range, 2.6-22.2) (p < 0.001). The high concentration of endotoxin (above whole sample median, 20.4 EU/mg) was associated with increased wheezing prevalence (p < 0.001), i.e., 61 % of workers exposed to high endotoxin concentration reported wheezing in the last 12 months compared to 29 % of workers exposed to low endotoxin concentration. The concentration of endotoxin was not associated with asthma report or with BHR confirmed asthma. Exposure to endotoxin is associated with a higher prevalence of wheezing, but not with asthma as defined by the mannitol bronchial challenge test or by self-reported asthma. Preventive measures are necessary for these workers.

Grand Rounds: An Outbreak of Toxic Hepatitis among Industrial Waste Disposal Workers

PubMed Central

Cheong, Hae-Kwan; Kim, Eun A; Choi, Jung-Keun; Choi, Sung-Bong; Suh, Jeong-Ill; Choi, Dae Seob; Kim, Jung Ran

2007-01-01

Context Industrial waste (which is composed of various toxic chemicals), changes to the disposal process, and addition of chemicals should all be monitored and controlled carefully in the industrial waste industry to reduce the health hazard to workers. Case presentation Five workers in an industrial waste plant developed acute toxic hepatitis, one of whom died after 3 months due to fulminant hepatitis. In the plant, we detected several chemicals with hepatotoxic potential, including pyridine, dimethylformamide, dimethylacetamide, and methylenedianiline. The workers had been working in the high-vapor-generating area of the plant, and the findings of pathologic examination showed typical features of acute toxic hepatitis. Discussion Infectious hepatitis and drug-induced hepatitis were excluded by laboratory findings, as well as the clinical course of hepatitis. All cases of toxic hepatitis in this plant developed after the change of the disposal process to thermochemical reaction–type treatment using unslaked lime reacted with industrial wastes. During this chemical reaction, vapor containing several toxic materials was generated. Although we could not confirm the definitive causative chemical, we suspect that these cases of hepatitis were caused by one of the hepatotoxic agents or by a synergistic interaction among several of them. Relevance to clinical or professional practice In the industrial waste treatment process, the danger of developing toxic hepatitis should be kept in mind, because any subtle change of the treatment process can generate various toxic materials and threaten the workers’ health. A mixture of hepatotoxic chemicals can induce clinical manifestations that are quite different from those predicted by the toxic property of a single agent. PMID:17366828

Laboratory-associated infections and biosafety.

PubMed Central

Sewell, D L

1995-01-01

An estimated 500,000 laboratory workers in the United States are at risk of exposure to infectious agents that cause disease ranging from inapparent to life-threatening infections, but the precise risk to a given worker unknown. The emergence of human immunodeficiency virus and hantavirus, the continuing problem of hepatitis B virus, and the reemergence of Mycobacterium tuberculosis have renewed interest in biosafety for the employees of laboratories and health care facilities. This review examines the history, the causes, and the methods for prevention of laboratory-associated infections. The initial step in a biosafety program is the assessment of risk to the employee. Risk assessment guidelines include the pathogenicity of the infectious agent, the method of transmission, worker-related risk factors, the source and route of infection, and the design of the laboratory facility. Strategies for the prevention and management of laboratory-associated infections are based on the containment of the infectious agent by physical separation from the laboratory worker and the environment, employee education about the occupational risks, and availability of an employee health program. Adherence to the biosafety guidelines mandated or proposed by various governmental and accrediting agencies reduces the risk of an occupational exposure to infectious agents handled in the workplace. PMID:7553572

Scientific-Chemical Viewpoints regarding Smoking: A Science Laboratory for All

ERIC Educational Resources Information Center

Blonder, Ron

2008-01-01

This article describes laboratory activity that examines the chemical process of smoking and the components of smoke, of both cigarettes and water pipes (narghiles also known as "hookah"). The aim of this activity is to expose adolescents to the scientific aspects of smoking; and to present the relevance of chemistry in everyday life. (Contains 3…

76 FR 25376 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... describes: Standard operating procedures for using hazardous chemicals; hazard-control techniques; equipment...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... collection requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in...

Learning by Brewing: Beer Production Experiments in the Chemical Engineering Laboratory

ERIC Educational Resources Information Center

Cerretani, Colin; Kelkile, Esayas; Landry, Alexandra

2017-01-01

We discuss the successful creation and implementation of a biotechnology track within the chemical engineering unit operations course. The track focuses on engineering principles relevant to brewing. Following laboratory modules investigating heat transfer processes and yeast fermentation kinetics, student groups design and implement a project to…

Effects of immunostimulation on social behavior, chemical communication and genome-wide gene expression in honey bee workers (Apis mellifera)

PubMed Central

2012-01-01

Background Social insects, such as honey bees, use molecular, physiological and behavioral responses to combat pathogens and parasites. The honey bee genome contains all of the canonical insect immune response pathways, and several studies have demonstrated that pathogens can activate expression of immune effectors. Honey bees also use behavioral responses, termed social immunity, to collectively defend their hives from pathogens and parasites. These responses include hygienic behavior (where workers remove diseased brood) and allo-grooming (where workers remove ectoparasites from nestmates). We have previously demonstrated that immunostimulation causes changes in the cuticular hydrocarbon profiles of workers, which results in altered worker-worker social interactions. Thus, cuticular hydrocarbons may enable workers to identify sick nestmates, and adjust their behavior in response. Here, we test the specificity of behavioral, chemical and genomic responses to immunostimulation by challenging workers with a panel of different immune stimulants (saline, Sephadex beads and Gram-negative bacteria E. coli). Results While only bacteria-injected bees elicited altered behavioral responses from healthy nestmates compared to controls, all treatments resulted in significant changes in cuticular hydrocarbon profiles. Immunostimulation caused significant changes in expression of hundreds of genes, the majority of which have not been identified as members of the canonical immune response pathways. Furthermore, several new candidate genes that may play a role in cuticular hydrocarbon biosynthesis were identified. Effects of immune challenge expression of several genes involved in immune response, cuticular hydrocarbon biosynthesis, and the Notch signaling pathway were confirmed using quantitative real-time PCR. Finally, we identified common genes regulated by pathogen challenge in honey bees and other insects. Conclusions These results demonstrate that honey bee genomic responses

Effects of immunostimulation on social behavior, chemical communication and genome-wide gene expression in honey bee workers (Apis mellifera).

PubMed

Richard, Freddie-Jeanne; Holt, Holly L; Grozinger, Christina M

2012-10-16

Social insects, such as honey bees, use molecular, physiological and behavioral responses to combat pathogens and parasites. The honey bee genome contains all of the canonical insect immune response pathways, and several studies have demonstrated that pathogens can activate expression of immune effectors. Honey bees also use behavioral responses, termed social immunity, to collectively defend their hives from pathogens and parasites. These responses include hygienic behavior (where workers remove diseased brood) and allo-grooming (where workers remove ectoparasites from nestmates). We have previously demonstrated that immunostimulation causes changes in the cuticular hydrocarbon profiles of workers, which results in altered worker-worker social interactions. Thus, cuticular hydrocarbons may enable workers to identify sick nestmates, and adjust their behavior in response. Here, we test the specificity of behavioral, chemical and genomic responses to immunostimulation by challenging workers with a panel of different immune stimulants (saline, Sephadex beads and Gram-negative bacteria E. coli). While only bacteria-injected bees elicited altered behavioral responses from healthy nestmates compared to controls, all treatments resulted in significant changes in cuticular hydrocarbon profiles. Immunostimulation caused significant changes in expression of hundreds of genes, the majority of which have not been identified as members of the canonical immune response pathways. Furthermore, several new candidate genes that may play a role in cuticular hydrocarbon biosynthesis were identified. Effects of immune challenge expression of several genes involved in immune response, cuticular hydrocarbon biosynthesis, and the Notch signaling pathway were confirmed using quantitative real-time PCR. Finally, we identified common genes regulated by pathogen challenge in honey bees and other insects. These results demonstrate that honey bee genomic responses to immunostimulation are

[Prevention and protection of workers' reproductive health].

PubMed

Sivochalova, O V; Fesenko, M A; Golovaneva, G V; Morozova, T V; Fedorova, E V; Irmiakova, A R; Gromova, E Iu; Stepanian, I V; Vuĭtsik, P A

2013-01-01

The article mentiones issues of preserving and strengthening the reproductive health of women workers, dealed by researchers of the laboratory, established in 1974. It describes the developed concept of the reproductive health problems and scientific research areas, developed documents, including legislative fields, formulates main prospects of the laboratory to meet the requirements of the present moment. Noted the role of the Problem Commission "Scientific basis for the reproductive health of workers", in the work of the Scientific Council on medical and environmental issues of workers' health.

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 6 2010-07-01 2010-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 6 2013-07-01 2013-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 6 2014-07-01 2013-07-01 true Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

Virtual Laboratory as an Element of Visualization When Teaching Chemical Contents in Science Class

ERIC Educational Resources Information Center

Herga, Nataša Rizman; Grmek, Milena Ivanuš; Dinevski, Dejan

2014-01-01

Using a variety of visualization tools for teaching and learning science and chemistry is necessary because pupils better understand chemical phenomena and formulate appropriate mental models. The purpose of the presented study was to determine the importance of a virtual laboratory as a visualization element when addressing chemical contents…

Notes: Water Flow and Chemical Retardation in Soils: A Simple Effective Laboratory Demonstration.

ERIC Educational Resources Information Center

Bowman, R. S.; And Others

1988-01-01

Describes a laboratory demonstration that illustrates principles of miscible displacement and chemical retardation in soils. Discusses how the experimental apparatus can be constructed from readily available materials. (TW)

Use of Chemical Pesticides in Ethiopia: A Cross-Sectional Comparative Study on Knowledge, Attitude and Practice of Farmers and Farm Workers in Three Farming Systems.

PubMed

Negatu, Beyene; Kromhout, Hans; Mekonnen, Yalemtshay; Vermeulen, Roel

2016-06-01

Chemical pesticides, regardless of their inherent hazard, are used intensively in the fast changing agricultural sector of Ethiopia. We conducted a cross-sectional pesticide Knowledge, Attitude and Practice (KAP) survey among 601 farmers and farm workers (applicators and re-entry workers) in three farming systems [large-scale closed greenhouses (LSGH), large-scale open farms (LSOF), and small-scale irrigated farms (SSIF)]. Main observations were that 85% of workers did not attain any pesticide-related training, 81% were not aware of modern alternatives for chemical pesticides, 10% used a full set of personal protective equipment, and 62% did not usually bath or shower after work. Among applicators pesticide training attendance was highest in LSGH (35%) and was lowest in SSIF (4%). None of the female re-entry farm workers had received pesticide-related training. Personal protective equipment use was twice as high among pesticide applicators as among re-entry workers (13 versus 7%), while none of the small-scale farm workers used personal protection equipment. Stockpiling and burial of empty pesticide containers and discarding empty pesticide containers in farming fields were reported in both LSOF and by 75% of the farm workers in SSIF. Considerable increment in chemical pesticide usage intensity, illegitimate usages of DDT and Endosulfan on food crops and direct import of pesticides without the formal Ethiopian registration process were also indicated. These results point out a general lack of training and knowledge regarding the safe use of pesticides in all farming systems but especially among small-scale farmers. This in combination with the increase in chemical pesticide usage in the past decade likely results in occupational and environmental health risks. Improved KAP that account for institutional difference among various farming systems and enforcement of regulatory measures including the available occupational and environmental proclamations in Ethiopia are

[Comprehension of hazard pictograms of chemical products among cleaning workers].

PubMed

Martí Fernández, Francesc; van der Haar, Rudolf; López López, Juan Carlos; Portell, Mariona; Torner Solé, Anna

2015-01-01

To assess the comprehension among cleaning workers of the hazard pictograms as defined by the Globally Harmonized System (GHS) of the United Nations, concerning the classification, labeling and packaging of substances and mixtures. A sample of 118 workers was surveyed on their perception of the GHS hazard pictograms. Comprehensibility was measured by the percentage of correct answers and the degree to which they reflected International Organization for Standardization and American National Standards Institute standards for minimum level of comprehension. The influence of different variables to predict comprehension capacity was assessed using a logistic regression model. Three groups of pictograms could be distinguished which were statistically differentiated by their comprehensibility. Pictograms reflecting "acute toxicity" and "flammable", were described correctly by 94% and 95% of the surveyed population, respectively. For pictograms reflecting "systemic toxicity", "corrosive", "warning", "environment" and "explosive" the frequency of correct answers ranged from 48% to 64%, whereas those for pictograms "oxidizing" and "compressed gas" were interpreted correctly by only 7% of respondents. Prognostic factors for poor comprehension included: not being familiar with the pictograms, not having received training on safe use of chemical products, being an immigrant and being 54 years of age or older. Only two pictograms exceeded minimum standards for comprehension. Training, a tool proven to be effective to improve the correct interpretation of danger symbols, should be encouraged, especially in those groups with greater comprehension difficulties. Copyright belongs to the Societat Catalana de Salut Laboral.

Pilot-Scale Laboratory Instruction for Chemical Engineering: The Specific Case of the Pilot-Unit Leading Group

ERIC Educational Resources Information Center

Billet, Anne-Marie; Camy, Severine; Coufort-Saudejaud, Carole

2010-01-01

This paper presents an original approach for Chemical Engineering laboratory teaching that is currently applied at INP-ENSIACET (France). This approach, referred to as "pilot-unit leading group" is based on a partial management of the laboratories by the students themselves who become temporarily in charge of one specific laboratory. In…

Using Laboratory Chemicals to Imitate Illicit Drugs in a Forensic Chemistry Activity

ERIC Educational Resources Information Center

Hasan, Shawn; Bromfield-Lee, Deborah; Oliver-Hoyo, Maria T.; Cintron-Maldonado, Jose A.

2008-01-01

This forensic chemistry activity utilizes presumptive forensic testing procedures and laboratory chemicals that produce screening results similar to controlled substances. For obvious reasons, obtaining heavily regulated controlled substances to create an undergraduate student activity is not practical for most educational institutions. We were…

[Evaluation of occupational risk factors, nutritional habits and nutritional status in industrial workers].

PubMed

Domagała-Dobrzycka, M

2000-01-01

The objective of this study was to examine the relationship between selected risk factors at the workplace and health indices in relation to nutritional habits and nutritional status in industrial workers. Exposure to physical and chemical risk factors and their impact on health in the province of Szczecin and in Poland was evaluated basing on data published in the Yearbooks of the Province of Szczecin, the Central Statistics Bureau (GUS) and Regional Inspectorate of Labor (OIP) in Szczecin. A random selection of plants in Szczecin was done and workplaces with chemical and physical risk levels exceeding the highest acceptable values were identified. Measurements of concentrations of chemicals and intensity of physical factors were performed by Work Environment Research Laboratories of the plants and by the laboratory of the Sanitary and Epidemiological Center in Szczecin. Eighty-eight men exposed to occupational risk factors were randomly selected. The mean period of exposure in that group was approximately ten years. The control group was composed of male workers (n = 83) not exposed to any of the risk factors in question (Tab. 3). Nutritional habits and nutritional status were studied during summer/autumn and winter/spring periods. Dietary survey consisted of the last 24-hour nutrient intake questionnaire. Nutritional status evaluation was based on body mass index (BMI) values and results of the following laboratory tests: blood cell count, levels of total protein, prealbumin, retinol binding protein (RBP), magnesium, inorganic phosphorus, and ascorbic acid. The following results were obtained: 1. Physical factors constituted the most frequent source of occupational risk in the province of Szczecin and in Poland in 1990-1994 (Tab. 1); 2. The incidence of occupational risk and occupational disease morbidity rates in 1990-1994 were lower for the province of Szczecin than the average for Poland; 3. The rate of fatal accidents at work in 1982-1994 was higher for the

Occupational safety and health status of medical laboratories in Kajiado County, Kenya.

PubMed

Tait, Fridah Ntinyari; Mburu, Charles; Gikunju, Joseph

2018-01-01

Despite the increasing interest in Occupational Safety and Health (OSH), seldom studies are available on OSH in medical laboratories from developing countries in general although a high number of injuries occur without proper documentation. It is estimated that every day 6,300 people die as a result of occupational accidents or work-related diseases resulting in over 2.3 million deaths per year. Medical laboratories handle a wide range of materials, potentially dangerous pathogenic agents and exposes health workers to numerous potential hazards. This study evaluated the status of OSH in medical laboratories in Kajiado County, Kenya. The objectives included establishment of biological, chemical and physical hazards; reviewing medical laboratories control measures; and enumerating factors hindering implementation of good practices in OSH. This was a cross-sectional descriptive study research design. Observation check lists, interview schedules and structured questionnaires were used. The study was carried out in 108 medical laboratories among 204 sampled respondents. Data was analysed using statistical package for social science (SPSS) 20 software. The commonest type of hazards in medical laboratories include; bacteria (80%) for Biological hazards; handling un-labelled and un-marked chemicals (38.2%) for chemical hazards; and laboratory equipment's dangerously placed (49.5%) for Physical hazards. According to Pearson's Product Moment Correlation analysis, not-wearing personal protective equipment's was statistically associated with exposure to hazards. Individual control measures were statistically significant at 0.01 significance level. Only 65.1% of the factors influencing implementation of OSH in medical laboratories were identified. Training has the highest contribution to good OSH practices.

Mortality among flavour and fragrance chemical plant workers in the United States.

PubMed Central

Thomas, T L

1987-01-01

Vital status on 1 January 1981 was determined for a cohort of 1412 white men employed in a flavour and fragrance chemical plant between 1945 and 1965 in order to investigate the risks from fatal diseases among men exposed to multiple chemicals in the manufacture of fragrances, flavours, aroma chemicals, and other organic substances. Cause specific standardised mortality ratios (SMRs) were calculated for the entire study population and for several subsets by likelihood of exposure to chemicals, duration of employment, and year of hire. SMRs for rectal cancer and ischaemic heart disease were raised among white male employees whose jobs were in production, maintenance, laboratory, or other jobs that would involve exposure to multiple chemicals used and produced in the plant. The excess of rectal cancer was confined to employees who had worked as chemical operators and mortality was significantly raised among men who worked for ten or more years. Traces of dioxin were recently found in and around plant buildings that used trichlorophenol in the production of hexachlorophene. The study group was small and had limited power to detect excess risk of rare causes of death; however, no soft tissue sarcomas were observed during the study period. PMID:3689704

INTEGRATED LABORATORY AND FIELD CHARACTERIZATION OF ORGANIC CARBON IN PM 2.5 FORMED THROUGH CHEMICAL REACTIONS

EPA Science Inventory

An integrated laboratory and field research program is underway at the National Exposure Research Laboratory (NERL) to characterize organic carbon in PM_2.5 (particulate matter) formed through chemical reactions. Information from this study will provide critical data ne...

Particle release and control of worker exposure during laboratory-scale synthesis, handling and simulated spills of manufactured nanomaterials in fume hoods

NASA Astrophysics Data System (ADS)

Fonseca, Ana S.; Kuijpers, Eelco; Kling, Kirsten I.; Levin, Marcus; Koivisto, Antti J.; Nielsen, Signe H.; Fransman, W.; Fedutik, Yijri; Jensen, Keld A.; Koponen, Ismo K.

2018-02-01

Fume hoods are one of the most common types of equipment applied to reduce the potential of particle exposure in laboratory environments. A number of previous studies have shown particle release during work with nanomaterials under fume hoods. Here, we assessed laboratory workers' inhalation exposure during synthesis and handling of CuO, TiO2 and ZnO in a fume hood. In addition, we tested the capacity of a fume hood to prevent particle release to laboratory air during simulated spillage of different powders (silica fume, zirconia TZ-3Y and TiO2). Airborne particle concentrations were measured in near field, far field, and in the breathing zone of the worker. Handling CuO nanoparticles increased the concentration of small particles (< 58 nm) inside the fume hood (up to 1 × 105 cm-3). Synthesis, handling and packaging of ZnO and TiO2 nanoparticles did not result in detectable particle release to the laboratory air. Simulated powder spills showed a systematic increase in the particle concentrations inside the fume hood with increasing amount of material and drop height. Despite powder spills were sometimes observed to eject into the laboratory room, the spill events were rarely associated with notable release of particles from the fume hood. Overall, this study shows that a fume hood generally offers sufficient exposure control during synthesis and handling of nanomaterials. An appropriate fume hood with adequate sash height and face velocity prevents 98.3% of particles release into the surrounding environment. Care should still be made to consider spills and high cleanliness to prevent exposure via resuspension and inadvertent exposure by secondary routes.

Epidemiological response to a suspected excess of cancer among a group of workers exposed to multiple radiological and chemical hazards

PubMed Central

Baysson, H; Laurier, D; Tirmarche, M; Valenty, M; Giraud, J

2000-01-01

OBJECTIVE—An excess of cancer was suspected by workers of the metallurgy department at the French Atomic Energy Commissariat (CEA) after several deaths from cancer were reported in 1983 and 1984. After a descriptive study performed by the CEA in 1985 the results of which were not conclusive enough to put an end to the controversy, the present cohort study was undertaken in 1989.
METHODS—As no specific exposure, or a precise cancer site was suspected, it was decided to include all subjects who had worked at the metallurgy department for at least 1 year between 1950 and 1968. The cohort was followed up to 31 December 1990. Individual occupational exposures were determined retrospectively for each year from 1950 to 1990, both qualitatively (annual job, and hazard records, and assistance from former workers) and quantitatively (for external radiation). On the basis of these exposures, three types of occupational tasks were identified: handling of chemicals, radionuclides, and external radiation. Standardised mortality ratios (SMRs) were calculated to estimate the risk of death, and the existence of an association between risk of cancer and each of the three tasks was tested.
RESULTS—The cohort included 356 workers, followed up for an average of 30 years (total of 10 820 person-years). The number of deaths from all causes and from all cancer sites were respectively 44 and 21. No excess of cancer deaths was found for the study period (SMR 0.77), nor was there a peak in 1983-4. The risk of death from all cancer sites increased with the duration of exposure to chemicals.
CONCLUSION—The results do not justify the workers' impression of an excess of cancer. They suggest, however, that the duration of work at some tasks that involved handling chemicals may be an indicator of risk of cancer. Communication to the workers during the study played an important part in reducing their concern, contributing to their better understanding of the results

Health hazard evaluation report HETA 84-419-1697, USGS Laboratory, Doraville, Georgia. [Benzene, methylene chloride, hexane, and acetone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rondinelli, R.; Wilcox, T.; Roper, P.

1986-05-01

The U.S. Geological Survey National Water Quality Laboratory, Doraville, Georgia requested an evaluation of physical complaints reported by employees to determine possible work related causes. Laboratory workers, in general, complained of physical symptoms which were irritative (rash, sore throat, nose or sinus irritation), neurological (numbness, muscle weakness) and nonspecific (dizziness, headache, emotional swings, insomnia, muscle aching, fatigue). Reported exposure to solvents such as benzene, methylene chloride, hexane and acetone were positively related with light headedness or dizziness, numbness, unexplained muscle weakness and muscle aching. Air sampling did not reveal any remarkable exposure to chemical contaminants. The authors conclude that nomore » relationship could be established between chemical exposures and antinuclear antibody positivity. Exposure to chemicals measured by air sampling were below occupational health exposure limits.« less

Developments in laboratory diagnostics for isocyanate asthma

PubMed Central

Wisnewski, Adam V.

2011-01-01

Purpose of review Isocyanates, reactive chemicals used to generate polyurethane, are a leading cause of occupational asthma worldwide. Workplace exposure is the best-recognized risk factor for disease development, but is challenging to monitor. Clinical diagnosis and differentiation of isocyanates as the cause of asthma can be difficult. The gold-standard test, specific inhalation challenge, is technically and economically demanding, and is thus only available in a few specialized centers in the world. With the increasing use of isocyanates, efficient laboratory tests for isocyanate asthma and exposure are urgently needed. Recent findings The review focuses on literature published in 2005 and 2006. Over 150 articles, identified by searching PubMed using keywords ‘diphenylmethane’, ‘toluene’ or ‘hexamethylene diisocyanate’, were screened for relevance to isocyanate asthma diagnostics. New advances in understanding isocyanate asthma pathogenesis are described, which help improve conventional radioallergosorbent and enzyme-linked immunosorbent assay approaches for measuring isocyanate-specific IgE and IgG. Newer immunoassays, based on cellular responses and discovery science readouts are also in development. Summary Contemporary laboratory tests that measure isocyanate-specific human IgE and IgG are of utility in diagnosing a subset of workers with isocyanate asthma, and may serve as a biomarker of exposure in a larger proportion of occupationally exposed workers. PMID:17351466

Using a Laboratory Simulator in the Teaching and Study of Chemical Processes in Estuarine Systems

ERIC Educational Resources Information Center

Garcia-Luque, E.; Ortega, T.; Forja, J. M.; Gomez-Parra, A.

2004-01-01

The teaching of Chemical Oceanography in the Faculty of Marine and Environmental Sciences of the University of Cadiz (Spain) has been improved since 1994 by the employment of a device for the laboratory simulation of estuarine mixing processes and the characterisation of the chemical behaviour of many substances that pass through an estuary. The…

Correlation between mechanical and chemical degradation after outdoor and accelerated laboratory aging for multilayer photovoltaic backsheets

NASA Astrophysics Data System (ADS)

Lin, Chiao-Chi; Lyu, Yadong; Yu, Li-Chieh; Gu, Xiaohong

2016-09-01

Channel cracking fragmentation testing and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were utilized to study mechanical and chemical degradation of a multilayered backsheet after outdoor and accelerated laboratory aging. A model sample of commercial PPE backsheet, namely polyethylene terephthalate/polyethylene terephthalate/ethylene vinyl acetate (PET/PET/EVA) was investigated. Outdoor aging was performed in Gaithersburg, Maryland, USA for up to 510 days, and complementary accelerated laboratory aging was conducted on the NIST (National Institute of Standards and Technology) SPHERE (Simulated Photodegradation via High Energy Radiant Exposure). Fracture energy, mode I stress intensity factor and film strength were analyzed using an analytical model based on channel cracking fragmentation testing results. The correlation between mechanical and chemical degradation was discussed for both outdoor and accelerated laboratory aging. The results of this work provide preliminary understanding on failure mechanism of backsheets after weathering, laying the groundwork for linking outdoor and indoor accelerated laboratory testing for multilayer photovoltaic backsheets.

Review of the Literature on Determinants of Chemical Hazard Information Recall among Workers and Consumers

PubMed Central

Sathar, Farzana; Dalvie, Mohamed Aqiel; Rother, Hanna-Andrea

2016-01-01

In many low and middle income countries (LMIC), workers’ and consumers’ only access to risk and hazard information in relation to the chemicals they use or work with is on the chemical label and safety data sheet. Recall of chemical hazard information is vital in order for label warnings and precautionary information to promote effective safety behaviors. A literature review, therefore, was conducted on determinants of chemical hazard information recall among workers and consumers globally. Since comprehension and recall are closely linked, the determinants of both were reviewed. Literature was reviewed from both online and print peer reviewed journals for all study designs and countries. This review indicated that the level of education, previous training and the inclusion of pictograms on the hazard communication material are all factors that contribute to the recall of hazard information. The influence of gender and age on recall is incongruent and remains to be explored. More research is required on the demographic predictors of the recall of hazard information, the effect of design and non-design factors on recall, the effect of training on the recall among low literate populations and the examining of different regions or contexts. PMID:27258291

Laboratory Safety and Chemical Hazards.

ERIC Educational Resources Information Center

Journal of Chemical Education, 1983

1983-01-01

Toxicology/chemical hazards, safety policy, legal responsibilities, adequacy of ventilation, chemical storage, evaluating experimental hazards, waste disposal, and laws governing chemical safety were among topics discussed in 10 papers presented at the Seventh Biennial Conference on Chemical Education (Stillwater, Oklahoma 1982). Several topics…

Dwarf Galaxies: Laboratories for Nucleosynthesis and Chemical Evolution

NASA Astrophysics Data System (ADS)

Kirby, Evan N.

2018-06-01

The dwarf galaxies in the Local Group are excellent laboratories for studying the creation of the elements (nucleosynthesis) and the build-up of those elements over time (chemical evolution). The galaxies' proximity permits spectroscopy of individual stars, from which detailed elemental abundances can be measured. Their small sizes and, in some cases, short star formation lifetimes imprinted chemical histories that are easy to interpret relative to larger, more complex galaxies, like the Milky Way.I will briefly review some techniques for measuring elemental abundances from medium-resolution spectroscopy of individual stars. I will show how the metallicity distributions of dwarf galaxies reflect their gas content at the time they were forming stars. Then, I will show how the ratio of alpha elements (for example, magnesium) to iron reveals the star formation history. Finally, I will use certain elements to tease out details of nucleosynthetic events. For example, low manganese and cobalt abundances indicate that the typical Type Ia supernova in dwarf galaxies was a low-density white dwarf, and the evolution of barium suggests that neutron star mergers were most likely responsible for the majority of neutron-capture elements in smaller dwarf galaxies.

Employment in the U.S. Chemical Industry. Chemical Work Force Tops 1.1 Million.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1990

1990-01-01

The annual census of industrial employment, production workers, women, the workweek, scientists and engineers, chemical employment, wages, and productivity in the chemical industry is presented. Trends in the numbers of workers, productivity, and unit labor costs are illustrated in graphs. (CW)

Assessment of DNA damage in ceramic workers.

PubMed

Anlar, Hatice Gul; Taner, Gokce; Bacanli, Merve; Iritas, Servet; Kurt, Turker; Tutkun, Engin; Yilmaz, Omer Hinc; Basaran, Nursen

2018-02-24

It is known that ceramic workers are potentially exposed to complex mixture of chemicals such as silica, inorganic lead, lime, beryllium and aluminum that can be associated with an increased risk of several diseases. All operations in the ceramic industries such as mixing, moulding, casting, shaking out and finishing jobs, have been associated with the higher exposure levels and in most of the silica-related industries, average overall exposure exceeded permissible exposure levels for respirable crystalline silica. The aim of this study was to evaluate the possible genotoxic damage in ceramic workers exposed to complex mixture of chemicals mainly crystalline silica. For this purpose, the blood and buccal epithelial cell samples were taken from the ceramic workers (n = 99) and their controls (n = 81). The genotoxicity was assessed by the alkaline comet assay in isolated lymphocytes and whole blood. Micronucleus (MN), binucleated (BN), pyknotic (PYC), condensed chromatin (CC), karyolytic (KYL), karyorrhectic (KHC) and nuclear bud (NBUD) frequencies in buccal epithelial cells and plasma 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG) levels were also evaluated. In the study, 38 workers were diagnosed with silicosis, 9 workers were suspected to have silicosis, whereas 52 workers were found to be healthy. DNA damage in blood and lymphocytes; MN, CC + KHC, PYC frequencies in buccal epithelial cells and 8-oxodG levels in plasma were increased in workers compared to their controls. These results showed that occupational chemical mixture exposure in ceramic industry may cause genotoxic damage that can lead to important health problems in the workers.

Safety in the Chemical Laboratory: An Undergraduate Chemical Laboratory Safety Course.

ERIC Educational Resources Information Center

Nicholls, L. Jewel

1982-01-01

Describes a two-quarter hour college chemistry course focusing on laboratory safety. Includes lists of topics/assignments, problem sets (toxicology, storage, and energy) and videotapes, films, and slide sets used in the course. (JN)

Writing Material in Chemical Physics Research: The Laboratory Notebook as Locus of Technical and Textual Integration

ERIC Educational Resources Information Center

Wickman, Chad

2010-01-01

This article, drawing on ethnographic study in a chemical physics research facility, explores how notebooks are used and produced in the conduct of laboratory science. Data include written field notes of laboratory activity; visual documentation of "in situ" writing processes; analysis of inscriptions, texts, and material artifacts produced in the…

Use of the LITEE Lorn Manufacturing Case Study in a Senior Chemical Engineering Unit Operations Laboratory

ERIC Educational Resources Information Center

Abraham, Nithin Susan; Abulencia, James Patrick

2011-01-01

This study focuses on the effectiveness of incorporating the Laboratory for Innovative Technology and Engineering Education (LITEE) Lorn Manufacturing case into a senior level chemical engineering unit operations course at Manhattan College. The purpose of using the case study is to demonstrate the relevance of ethics to chemical engineering…

Assessment of Application Technology of Natural User Interfaces in the Creation of a Virtual Chemical Laboratory

ERIC Educational Resources Information Center

Jagodzinski, Piotr; Wolski, Robert

2015-01-01

Natural User Interfaces (NUI) are now widely used in electronic devices such as smartphones, tablets and gaming consoles. We have tried to apply this technology in the teaching of chemistry in middle school and high school. A virtual chemical laboratory was developed in which students can simulate the performance of laboratory activities similar…

Temporal assessment of molting in workers of Formosan subterranean termites (Isoptera: Rhinotermitidae)

USDA-ARS?s Scientific Manuscript database

Molt frequency of workers in laboratory-reared juvenile colonies and foraging population from field colonies of Coptotermes formosanus Shiraki was determined using planar arenas in laboratory. Given that, chitin synthesis inhibitor (CSI)-incorporated baits disrupt the molting process of workers that...

Survey of laboratory-acquired infections around the world in biosafety level 3 and 4 laboratories.

PubMed

Wurtz, N; Papa, A; Hukic, M; Di Caro, A; Leparc-Goffart, I; Leroy, E; Landini, M P; Sekeyova, Z; Dumler, J S; Bădescu, D; Busquets, N; Calistri, A; Parolin, C; Palù, G; Christova, I; Maurin, M; La Scola, B; Raoult, D

2016-08-01

Laboratory-acquired infections due to a variety of bacteria, viruses, parasites, and fungi have been described over the last century, and laboratory workers are at risk of exposure to these infectious agents. However, reporting laboratory-associated infections has been largely voluntary, and there is no way to determine the real number of people involved or to know the precise risks for workers. In this study, an international survey based on volunteering was conducted in biosafety level 3 and 4 laboratories to determine the number of laboratory-acquired infections and the possible underlying causes of these contaminations. The analysis of the survey reveals that laboratory-acquired infections have been infrequent and even rare in recent years, and human errors represent a very high percentage of the cases. Today, most risks from biological hazards can be reduced through the use of appropriate procedures and techniques, containment devices and facilities, and the training of personnel.

Biosafety in the Laboratory: Prudent Practices for the Handling and Disposal of Infectious Materials

DTIC Science & Technology

1989-03-01

EPIDEMIOLOGY OF OCCUPATI(NAL INFECTIONS OF LABORATORY WORKERS / 8 A . IN TRO D U CT IO N ............................................... 8 B. THE EPIDEM... Infections of Laboratory and maiae.rs, project directors, and laboratory su- Workers pervisors; it is also addressed to the individual labo- ratory workers ...iaboratory workers , it is necessary them. to know both the number of actual infections over a Although we have tried to be comprehensive in given

[LaboRisCh: an algorithm for assessment of health risks due to chemicals in research laboratories and similar workplaces].

PubMed

Strafella, Elisabetta; Bracci, M; Calisti, R; Governa, M; Santarelli, Lory

2008-01-01

Chemical risk assessment in research laboratories is complicated by factors such as the large number of agents to be considered, each present in small quantities, and the very short and erratic periods of exposure, all of which make reliable environmental and biological monitoring particularly difficult and at times impossible. In such environments, a preliminary evaluation procedure based on algorithms would be useful to establish the hazard potential of a given situation and to guide the appropriate intervention. The LaboRisCh model was expressly designed to assess the health risk due to chemicals in research laboratories and similar workplaces. The model is based on the calculation of the value of a synthetic single risk index for each substance and compound found in a laboratory and, subsequently, of a further synthetic single risk index for the whole laboratory or, where required, a section thereof. This makes LaboRisCh a compromise between need for information, ease of use, and resources required for the assessment. The risk index includes several items, chiefly the physical and chemical properties, intrinsic hazard potential, amount, dilution, and time of exposure to each agent; waste management; possible interactions; presence and efficiency of collective and individual protection devices, and staff training in good laboratory practices. The value of the synthetic single index corresponds to one of three areas: no risk (green), possible risk (yellow), and certain risk (red). Preliminary data confirm the model. LaboRisCh appears to be a reliable method for chemical risk assessment in research laboratories and similar workplaces.

Occupational Health Risks in Cardiac Catheterization Laboratory Workers.

PubMed

Andreassi, Maria Grazia; Piccaluga, Emanuela; Guagliumi, Giulio; Del Greco, Maurizio; Gaita, Fiorenzo; Picano, Eugenio

2016-04-01

Orthopedic strain and radiation exposure are recognized risk factors in personnel staff performing fluoroscopically guided cardiovascular procedures. However, the potential occupational health effects are still unclear. The purpose of this study was to examine the prevalence of health problems among personnel staff working in interventional cardiology/cardiac electrophysiology and correlate them with the length of occupational radiation exposure. We used a self-administered questionnaire to collect demographic information, work-related information, lifestyle-confounding factors, all current medications, and health status. A total number of 746 questionnaires were properly filled comprising 466 exposed staff (281 males; 44±9 years) and 280 unexposed subjects (179 males; 43±7years). Exposed personnel included 218 interventional cardiologists and electrophysiologists (168 males; 46±9 years); 191 nurses (76 males; 42±7 years), and 57 technicians (37 males; 40±12 years) working for a median of 10 years (quartiles: 5-24 years). Skin lesions (P=0.002), orthopedic illness (P<0.001), cataract (P=0.003), hypertension (P=0.02), and hypercholesterolemia (P<0.001) were all significantly higher in exposed versus nonexposed group, with a clear gradient unfavorable for physicians over technicians and nurses and for longer history of work (>16 years). In highly exposed physicians, adjusted odds ratio ranged from 1.7 for hypertension (95% confidence interval: 1-3; P=0.05), 2.9 for hypercholesterolemia (95% confidence interval: 1-5; P=0.004), 4.5 for cancer (95% confidence interval: 0.9-25; P=0.06), to 9 for cataract (95% confidence interval: 2-41; P=0.004). Health problems are more frequently observed in workers performing fluoroscopically guided cardiovascular procedures than in unexposed controls, raising the need to spread the culture of safety in the cath laboratory. © 2016 American Heart Association, Inc.

Assessment of aflatoxin exposure of laboratory worker during food contamination analyses. Assessment of the procedures adopted by an A.R.P.A.L. laboratory (Liguria Region Environmental Protection Agency).

PubMed

Traverso, A; Bassoli, Viviana; Cioè, A; Anselmo, Silvia; Ferro, Marta

2010-01-01

Aflatoxins are mycotoxins derived from foodstuffs colonized by fungal species of the genus Aspergillus; they are common food contaminants with immunosuppressive, mutagenic and carcinogenic activity. Aflatoxins are heat-resistant and are thus easily transmitted along the food chain. They are hepatotoxic and have the potential to induce hepatocellular carcinoma. Agri-food industry workers are thus at risk of ingestion as well as transmucosal absorption or inhalation of toxins released during product preparation or processing. To measure the levels of airborne mycotoxins, particularly aflatoxins, in a laboratory analysing imported foodstuffs for mycotoxin contamination. The protocol used to analyse a batch of shelled peanuts from Vietnam, especially the grinding phase, which is held to be at the highest risk ofgenerating airborne toxins, was assessed at the A.R.PA.L. laboratory (Liguria Region Environmental Protection Agency) of Genoa, Italy, which participates in a European aflatoxin monitoring project. Wet grinding was performed to avoid production of large amounts of dust. Comparison of airborne concentrations before and after grinding with legal thresholds disclosed that the analytical procedures involved negligible aflatoxin levels for operators (environmental burden 0.11 pg/ m3). Given the toxicity of aflatoxins, worker protection measures should be consistently adopted and enforced. Threshold limit values for working environments should be introduced besides the existing ones for public health.

Life Sciences Laboratory 2 Fan Exhaust Mixing Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flaherty, Julia E.; Antonio, Ernest J.

An SF 6 tracer release was performed in the LSL-II ventilation stack over the weekend of March 5, 2016. The primary purpose of this study was to experimentally determine the gaseous concentration of material from a fume hood to the fan outlet, as well as at typical worker locations, to gain an understanding of potential worker exposures impacts. Five different fan operating configurations were utilized to ensure that the full spectrum of historical operating configurations was addressed. Some summary points from this study include: •Relatively high concentrations were observed within the stack area. –Between 50 and 100% of the exhaustmore » concentration may be observed within the stack. •Background concentrations were observed outside the stack area. –Workers outside the stack itself, but on the roof, are unlikely to be impacted by the exhaust. •Elevated concentrations on the order of 25% of the exhaust concentrations were observed within the Penthouse. •Transport time from a laboratory fume hood to the exhaust fan is within one to two minutes. •Penthouse concentrations climb from background levels to steady state over 15+ minutes. •Wind speed and wind direction did not play a significant role in the test outcomes. –A slight bias in the concentration distribution may be discernable based on wind speed and direction. •When both fans are operating, material from fume hoods on the east side preferentially flow through the east fan, while material from fume hoods on the west side preferentially flow through the west fan. This effectively doubles the concentration at that fan. This mixing study will inform other study components to develop a more complete picture of the worker potential exposure from LSL-II Rooftop activities. Estimating the mean concentration in the stack from chemical inventories and fume hood emissions for both current and historical laboratory activities is a separate effort. These estimates of mean ventilation concentrations

Exposure assessment among US workers employed in semiconductor wafer fabrication.

PubMed

Marano, Donald E; Boice, John D; Munro, Heather M; Chadda, Bandana K; Williams, Michael E; McCarthy, Colleen M; Kivel, Peggy F; Blot, William J; McLaughlin, Joseph K

2010-11-01

To classify 100,081 semiconductor workers employed during 1983-2002, and some as early as 1968, regarding potential for chemical exposures in cleanrooms during silicon wafer fabrication. This study involved site visits to 10 cities with fabrication facilities, evaluation of 12,300 personal air samples for >60 chemicals, and examination of >37,000 departments and >8600 job codes to develop exposure groupings. Each worker was classified into one of five exposure groups on the basis of job-department combinations: 1) fabrication process equipment operators or process equipment service technicians working in cleanrooms (n = 28,583); 2) professionals such as supervisors working in fabrication areas (n = 8642); 3) professionals and office workers in nonfabrication areas (n = 53,512); 4) back-end workers (n = 5256); or 5) other nonfabrication workers (n = 4088). More than 98% of the personal air samples were below current occupational exposure limits. Although specific chemical exposures at the level of the individual could not be quantified, semiconductor workers were classified into broad exposure groups for assessment of cancer mortality in an epidemiologic study.

Inter-laboratory variation in the chemical analysis of acidic forest soil reference samples from eastern North America

Treesearch

D.S. Ross; S.W. Bailey; R.D. Briggs; J. Curry; I.J. Fernandez; G. Fredriksen; C.L. Goodale; P.W. Hazlett; P.R. Heine; C.E. Johnson; J.T. Larson; G.B. Lawrence; R.K. Kolka; R. Ouimet; D. Pare; D. deB Richter; C.D. Schirmer; R.A. Warby

2015-01-01

Long-term forest soil monitoring and research often requires a comparison of laboratory data generated at different times and in different laboratories. Quantifying the uncertainty associated with these analyses is necessary to assess temporal changes in soil properties. Forest soil chemical properties, and methods to measure these properties, often differ from...

Integrating Environmental Management in Chemical Engineering Education by Introducing an Environmental Management System in the Student's Laboratory

ERIC Educational Resources Information Center

Montanes, Maria T.; Palomares, Antonio E.

2008-01-01

In this work we show how specific challenges related to sustainable development can be integrated into chemical engineering education by introducing an environmental management system in the laboratory where the students perform their experimental lessons. It is shown how the system has been developed and implemented in the laboratory, what role…

Reassigning the Structures of Natural Products Using NMR Chemical Shifts Computed with Quantum Mechanics: A Laboratory Exercise

ERIC Educational Resources Information Center

Palazzo, Teresa A.; Truong, Tiana T.; Wong, Shirley M. T.; Mack, Emma T.; Lodewyk, Michael W.; Harrison, Jason G.; Gamage, R. Alan; Siegel, Justin B.; Kurth, Mark J.; Tantillo, Dean J.

2015-01-01

An applied computational chemistry laboratory exercise is described in which students use modern quantum chemical calculations of chemical shifts to assign the structure of a recently isolated natural product. A pre/post assessment was used to measure student learning gains and verify that students demonstrated proficiency of key learning…

Laboratory Inquiry for Determining the Chemical Composition of a Component in a Daily Use Detergent: Sodium Sesquicarbonate

ERIC Educational Resources Information Center

Koga, Nobuyoshi; Kimura, Tomoyasu; Shigedomi, Kana

2011-01-01

An inquiry-based laboratory activity to determine the chemical composition of a component in alkaline detergents, sodium sesquicarbonate (SSC), is proposed. On the basis of introductory demonstrations by the instructor on the chemical properties and reactions of SSC, students propose the hypothetical composition of SSC and possible quantitative…

Bladder cancer incidence among workers exposed to o-toluidine, aniline and nitrobenzene at a rubber chemical manufacturing plant

PubMed Central

Carreón, Tania; Hein, Misty J; Hanley, Kevin W; Viet, Susan M; Ruder, Avima M

2015-01-01

Background An earlier investigation found increased bladder cancer incidence among workers at a rubber chemical manufacturing plant that used o-toluidine, aniline and nitrobenzene. The cohort was expanded to include additional workers (n=1875) and updated through 2007 to assess bladder cancer with improved exposure characterisation. Methods Work histories were updated and exposure categories and ranks were developed for o-toluidine, aniline and nitrobenzene combined. Incident cancers were identified by linkage to six state cancer registries. Residency in time-dependent cancer registry catchment areas was determined. SIR and standardised rate ratios for bladder cancer were calculated by exposure category and cumulative rank quartiles for different lag periods. Cox regression was used to model bladder cancer incidence with estimated cumulative rank, adjusting for confounders. Indirect methods were used to control for smoking. Results Excess bladder cancer was observed compared to the New York State population (SIR=2.87, 95% CI 2.02 to 3.96), with higher elevations among workers definitely exposed (moderate/high) (SIR=3.90, 95% CI 2.57 to 5.68), and in the highest cumulative rank quartile (SIR=6.13, 95% CI 2.80 to 11.6, 10-year lag). Bladder cancer rates increased significantly with estimated cumulative rank (10-year lag). Smoking only accounted for an estimated 8% elevation in bladder cancer incidence. Conclusions Bladder cancer incidence remains elevated in this cohort and significantly associated with estimated cumulative exposure. Results are consistent with earlier findings in this and other cohorts. Despite other concurrent chemical exposures, we consider o-toluidine most likely responsible for the bladder cancer incidence elevation and recommend a re-examination of occupational exposure limits. PMID:24368697

Can vaccinia virus be replaced by MVA virus for testing virucidal activity of chemical disinfectants?

PubMed

Rabenau, Holger F; Rapp, Ingrid; Steinmann, Jochen

2010-06-23

Vaccinia virus strain Lister Elstree (VACV) is a test virus in the DVV/RKI guidelines as representative of the stable enveloped viruses. Since the potential risk of laboratory-acquired infections with VACV persists and since the adverse effects of vaccination with VACV are described, the replacement of VACV by the modified vaccinia Ankara strain (MVA) was studied by testing the activity of different chemical biocides in three German laboratories. The inactivating properties of different chemical biocides (peracetic acid, aldehydes and alcohols) were tested in a quantitative suspension test according to the DVV/RKI guideline. All tests were performed with a protein load of 10% fetal calf serum with both viruses in parallel using different concentrations and contact times. Residual virus was determined by endpoint dilution method. The chemical biocides exhibited similar virucidal activity against VACV and MVA. In three cases intra-laboratory differences were determined between VACV and MVA - 40% (v/v) ethanol and 30% (v/v) isopropanol are more active against MVA, whereas MVA seems more stable than VACV when testing with 0.05% glutardialdehyde. Test accuracy across the three participating laboratories was high. Remarkably inter-laboratory differences in the reduction factor were only observed in two cases. Our data provide valuable information for the replacement of VACV by MVA for testing chemical biocides and disinfectants. Because MVA does not replicate in humans this would eliminate the potential risk of inadvertent inoculation with vaccinia virus and disease in non-vaccinated laboratory workers.

Inter-laboratory comparison study on measuring semi-volatile organic chemicals in standards and air samples.

PubMed

Su, Yushan; Hung, Hayley

2010-11-01

Measurements of semi-volatile organic chemicals (SVOCs) were compared among 21 laboratories from 7 countries through the analysis of standards, a blind sample, an air extract, and an atmospheric dust sample. Measurement accuracy strongly depended on analytes, laboratories, and types of standards and samples. Intra-laboratory precision was generally good with relative standard deviations (RSDs) of triplicate injections <10% and with median differences of duplicate samples between 2.1 and 22%. Inter-laboratory variability, measured by RSDs of all measurements, was in the range of 2.8-58% in analyzing standards, and 6.9-190% in analyzing blind sample and air extract. Inter-laboratory precision was poorer when samples were subject to cleanup processes, or when SVOCs were quantified at low concentrations. In general, inter-laboratory differences up to a factor of 2 can be expected to analyze atmospheric SVOCs. When comparing air measurements from different laboratories, caution should be exercised if the data variability is less than the inter-laboratory differences. 2010. Published by Elsevier Ltd. All rights reserved.

A Manpower Study of Technical Personnel in Hospital Clinical Laboratories. Final Report.

ERIC Educational Resources Information Center

Harkness, James P., And Others

As one of the efforts related to closing the gap between the growing demands for clinical laboratory workers and the supply of well-trained workers, the volume and quality of laboratory procedures and the general characteristics of workers in North Carolina hospitals were studied. Approaches to the study included tests on "unknowns" by…

Mortality among retired fur workers. Dyers, dressers (tanners) and service workers.

PubMed

Sweeney, M H; Walrath, J; Waxweiler, R J

1985-08-01

A retrospective cohort mortality study was conducted on 807 fur dyers, fur dressers (tanners), and fur service workers who were pensioned between 1952 and 1977 by the Fur, Leather and Machine Workers Union of New York City. Workplace exposures of fur workers varied with job category. Dyers were exposed to oxidative dyes used in commercial hair dyes; dressers and service workers were exposed to tanning chemicals. In a comparison with the New York City population, no significant increases in mortality were observed among the fur dyers. Among fur dressers, mortality from all malignant neoplasms [standardized mortality ratio (SMR) 151] and lung cancer (SMR 232) was significantly elevated, as was mortality from cardiovascular disease (SMR 126) among fur service workers. When examined by ethnic origin, the elevated SMR values and directly age-adjusted rate ratios suggested that foreign-born fur dressers and eastern European-born fur workers experienced the highest risks for lung and colorectal cancers, respectively. These data support previous findings of increased mortality from colorectal cancer in the foreign-born population of the United States and suggest a possible occupational etiology for the observed lung cancer excess.

Evaluating interest in an influenza A(H5N1) vaccine among laboratory workers who work with highly-pathogenic avian influenza viruses in the United States.

PubMed

Russell, Kate E; Bresee, J S; Katz, J M; Olsen, S J

2018-01-04

Highly pathogenic avian influenza A (HPAI) viruses found in poultry and wild birds occasionally infect humans and can cause serious disease. In 2014, the Advisory Committee on Immunization Practices (ACIP) reviewed data from one licensed ASO3-adjuvanted influenza A(H5N1) vaccine for consideration of use during inter-pandemic periods among persons with occupational exposure. To guide vaccine policy decisions, we conducted a survey of laboratory workers to assess demand for HPAI vaccination. We designed an anonymous web survey (EpiInfo 7.0) to collect information on demographics, type of work and time spent with HPAI viruses, and interest in HPAI vaccination. Eligible participants were identified from 42 entities registered with United States Department of Agriculture's Agricultural Select Agent program in 2016 and emailed electronic surveys. Personnel with Biosafety Level 3 enhanced (BSL-3E) laboratory access were surveyed. Descriptive analysis was performed. Overall, 131 responses were received from 33 principal investigators, 26 research scientists, 24 technicians, 15 postdoctoral fellows, 6 students, and 27 others. The estimated response rate was 15% among the laboratory personnel of responding principal investigators. One hundred respondents reported working in a BSL-3E area where HPAI experiments occurred with a mean time of 5.1-11.7 h per week. Overall, 49% were interested in receiving an A(H5N1) vaccine. By role, interest was highest among students (80%) and among those who spent >50% of their time in a BSL-3E area (64%). Most (61%) of those who said they might be or were not interested in vaccine believed it would not provide additional protection to current safety practices. Half of responding laboratory workers was interested in receiving an influenza A(H5N1) vaccine. HPAI vaccination of laboratory workers at risk of occupational exposure could be used along with existing safety practices to protect this population. Published by Elsevier Ltd.

Computation of Chemical Shifts for Paramagnetic Molecules: A Laboratory Experiment for the Undergraduate Curriculum

ERIC Educational Resources Information Center

Pritchard, Benjamin P.; Simpson, Scott; Zurek, Eva; Autschbach, Jochen

2014-01-01

A computational experiment investigating the [superscript 1]H and [superscript 13]C nuclear magnetic resonance (NMR) chemical shifts of molecules with unpaired electrons has been developed and implemented. This experiment is appropriate for an upper-level undergraduate laboratory course in computational, physical, or inorganic chemistry. The…

Differences in national legislation for the implementation of lead regulations included in the European directive for the protection of the health and safety of workers with occupational exposure to chemical agents (98/24/EC).

PubMed

Taylor, Andrew; Angerer, Jurgen; Arnaud, Josiane; Claeys, Françoise; Kristiansen, Jesper; Mazarrasa, Olav; Menditto, Antonio; Patriarca, Marina; Pineau, Alain; Valkonen, Sinikka; Weykamp, Cas

2007-01-01

The European Council Directive 98/24 on the protection of the health and safety of workers exposed to chemical agents sets out provisions for environmental and biological monitoring, making specific reference to binding limit values and health surveillance measures for those with exposure to lead To compare how the Directive has been implemented at a national level in EU countries and to determine whether workers receive equivalent protection. Information on selected key issues was collected from 14 EU countries by means of a structured questionnaire. National occupational exposure limit values generally reflect that set by the Directive (0.15 mg/m(3)), but in five cases lower limits are set. National binding biological limit values range from 20 microg/100 ml blood in one country up to 80 microg/100 ml blood in others. The risk to the unborn child is generally recognised with specific measures for women of child-bearing potential or those that are pregnant or breast feeding. In only three countries are special arrangements included for young workers. Limits at which medical surveillance is put into effect are more consistent at 40 microg/100 ml in most countries. The Directive also refers to guidelines for health surveillance but none have been issued with respect to lead. Thus monitoring strategies and requirements for analytical performance vary considerably. The results of this survey suggest that protection of workers against the risk of exposure to lead at work is far from uniform across the European Union. Such disparity may also have implications on the requirements set at national level for laboratories measuring lead in blood and/or air. In the interest of harmonisation within the EU, further consideration should be given to the Annex II of the EC Directive 98/24, taking into account the suggestions for lower binding limit values for lead; this should include full guidelines for medical surveillance and requirements for laboratories should be issued.

Effect of occupational safety measures on micronucleus frequency in semiconductor workers.

PubMed

Winker, Robert; Roos, Gerhard; Pilger, Alexander; Rüdiger, Hugo W

2008-02-01

To examine whether semiconductor workers exposed to complex mixtures of chemical waste show an increase in genotoxic effects, and, if so, whether occupational safety measures protect these workers. To assess chemical exposure in the workplace, air monitoring of boron trifluoride and boron trichloride was performed and urinary concentrations of fluoride were measured. The cytokinesis-block micronucleus test on isolated lymphocytes was used for the detection of genotoxic effects. Two series of monitoring have been performed in order to assess the effect of implemented protection measures. We found a significantly higher mean frequency of micronuclei in exposed workers than in controls, whereas air monitoring and measurement of urinary fluoride failed to detect chemical exposure of these workers. Twelve years after implementation of protective measures, the mean level of micronuclei in exposed individuals was found to be as low as those from controls. These findings indicate that exposed workers in the semiconductor industry may have an increased risk of genotoxic effects from complex mixtures of chemical waste products. The decline of the mean level of micronuclei in exposed workers down to the base level of controls after implementation of protective measures points to the significance of adequate safety standards to protect against chromosomal damage in semiconductor personnel.

Tree Topping Ceremony at NASA's Propulsion Research Laboratory

NASA Technical Reports Server (NTRS)

2003-01-01

A new, world-class laboratory for research into future space transportation technologies is under construction at the Marshall Space Flight Center (MSFC) in Huntsville, AL. The state-of-the-art Propulsion Research Laboratory will serve as a leading national resource for advanced space propulsion research. Its purpose is to conduct research that will lead to the creation and development of irnovative propulsion technologies for space exploration. The facility will be the epicenter of the effort to move the U.S. space program beyond the confines of conventional chemical propulsion into an era of greatly improved access to space and rapid transit throughout the solar system. The Laboratory is designed to accommodate researchers from across the United States, including scientists and engineers from NASA, the Department of Defense, the Department of Energy, universities, and industry. The facility, with 66,000 square feet of useable laboratory space, will feature a high degree of experimental capability. Its flexibility will allow it to address a broad range of propulsion technologies and concepts, such as plasma, electromagnetic, thermodynamic, and propellantless propulsion. An important area of emphasis will be development and utilization of advanced energy sources, including highly energetic chemical reactions, solar energy, and processes based on fission, fusion, and antimatter. The Propulsion Research Laboratory is vital for developing the advanced propulsion technologies needed to open up the space frontier, and will set the stage of research that could revolutionize space transportation for a broad range of applications. This photo depicts construction workers taking part in a tree topping ceremony as the the final height of the laboratory is framed. The ceremony is an old German custom of paying homage to the trees that gave their lives in preparation of the building site.

[Study on the immunization status and its influencing factors among workers from the polio network laboratories in China].

PubMed

Guo, Y S; Wang, J Q; Xu, C; Liu, Y N; He, X H; Wei, Q

2017-06-10

Objective: To Investigate the immune status and influencing factors of provincial polio network laboratory (PNL) workers in China so as to provide evidence for the development of related strategies to protect personnel working at the PNLs. Methods: All the practitioners from the PNLs at the provincial centers for disease control, were selected as objects for this study, from October to December, 2016, under a questionnaire survey. Information on status of immunity and influencing factors was collected, with SAS software, trend chi-square used for statistics analysis. Results: A total of 77 workers were involved in this survey, with 60 (78 % ) of them completed the polio-based immune program but the rest 17 (22 % ) remained records unclear. 66 people (about 86 % ) remembered clearly that they had received vaccination when engaging in the polio-lab work, but the rest 11 (14 % ) with only partial vaccination records. We also noticed that the Influencing factors realted to vaccination status were: age ( χ (2)=2.48, P <0.05), title ( χ (2)=2.51, P <0.05), years of employment ( P <0.000 1), education ( χ (2)=0.74, P =0.46) and gender ( χ (2)=0.46, P =0.50). Conclusion: Immune status of the Chinese provincial PNL practitioners appeared fairly good as 86 % of all the workers had received polio-related vaccination, with 41 % of them completed a 3-time inoculation program, when started working in this field.

HEALTH AND SAFETY ORGANIZING: OCAW’S WORKER-TO-WORKER HEALTH AND SAFETY TRAINING PROGRAM*

PubMed Central

SLATIN, CRAIG

2018-01-01

In 1987, the Oil, Chemical, and Atomic Workers International Union (OCAW) was funded as one of the original eleven awardees of the Superfund Worker Training Program of the National Institute of Environmental Health Sciences. The OCAW, with the Labor Institute, developed a hazardous waste worker and hazardous materials emergency responder health and safety training program that was specific to its members in the represented industries. A social history is developed to explore a union-led, worker health education intervention. The program sought to develop worker-trainers who would conduct the training, using the Small-Group Activity Method, participate in curriculum development, and ultimately use health and safety training as a vehicle for identifying, developing, and mobilizing health and safety activists among the membership. Although the direction for this effort came from progressive leadership, it arose from the political economy of labor/management relations within specific industrial sectors. PMID:17208754

Occupational skin hazards and prevalence of occupational skin diseases in shoe manufacturing workers in Indonesia.

PubMed

Febriana, Sri Awalia; Soebono, Hardyanto; Coenraads, Pieter-Jan

2014-02-01

Shoe manufacturing workers are exposed daily to an extensive range of potential physical and chemical occupational hazards. Shoe manufacturing in Indonesia is one of the industrial sectors that has shown sustained growth amongst the newly industrialized countries (NICs). In this study, we investigated the possible potential exposure of the workers to physical and occupational hazards and determined the prevalence of occupational skin diseases at a shoe manufacturing factory in Indonesia. A cross-sectional study on the observation of the working process and an inventory and risk assessment of exposure to the chemicals used. Classification of chemicals as potential sensitizers/irritants and qualitative assessments of these chemicals were done. Workers were examined and interviewed using the Nordic Occupational Skin Questionnaire-2002/LONG. The risk of Occupational skin diseases (OSD) at the shoe factory was mainly related to the exposure of the workers' skin to potential physical and chemical hazards in hot and humid environmental conditions. From a total of 514 workers, 8.5 % reported current OSD and 4.8 % reported a history of OSD. Occupational skin diseases were diagnosed in 29 % of the workers by dermatologists and 7.6 % had an occupational contact dermatitis (OCD). Of the 39 workers with contact dermatitis, 33 consented to being patch tested, 14 (3 %) workers showed a positive results and considered as having an occupational allergic contact dermatitis (OACD) and 25 (4.9 %) had an occupational irritant contact dermatitis (OICD). We observed a repeated and prolonged exposure of the workers to numerous physical and chemical skin hazards at this factory.

Dental Laboratory Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

Wastewater treatment of chemical laboratory using electro assisted-phytoremediation (EAPR)

NASA Astrophysics Data System (ADS)

Putra, Rudy Syah; Trahadinata, Gilang Ahmad; Latif, Arif; Solehudin, Mochamad

2017-03-01

The EAPR process using water hyacinth (Eichornia crassipes) on the wastewater treatment of chemical laboratory had been evaluated. The purpose of the EAPR process was to decrease the BOD, COD and heavy metal concentration in the wastewater. The effectiveness of the process on the wastewater treatment was evaluated using COD, BOD, and heavy metal (Pb, Cu) concentration, respectively. The result showed that the EAPR process decrease the COD, BOD, Pb and Cu in the 4 h of EAPR process. Those concentrations were met the water quality standard of class IV according to government regulation No. 82/2001 regarding the water quality management and water pollution control of the Republic of Indonesia.

Chemical reaction and dust formation studies in laboratory hydrocarbon plasmas.

NASA Astrophysics Data System (ADS)

Hippler, Rainer; Majumdar, Abhijit; Thejaswini, H. C.

Plasma chemical reaction studies with relevance to, e.g., Titan's atmosphere have been per-formed in various laboratory plasmas [1,2]. Chemical reactions in a dielectric barrier discharge at medium pressure of 250-300 mbar have been studied in CH4 /N2 and CH4 /Ar gas mixtures by means of mass spectrometry. The main reaction scheme is production of H2 by fragmenta-tion of CH4 , but also production of larger hydrocarbons like Cn Hm with n up to 10 including formation of different functional CN groups is observed. [1] A. Majumdar and R. Hippler, Development of dielectric barrier discharge plasma processing apparatus for mass spectrometry and thin film deposition, Rev. Sci. Instrum. 78, 075103 (2007) [2] H.T. Do, G. Thieme, M. Frühlich, H. Kersten, and R. Hippler, Ion Molecule and Dust Particle Formation in Ar/CH4 , Ar/C2 H2 and Ar/C3 H6 Radio-frequency Plasmas, Contrib. Plasma Phys. 45, No. 5-6, 378-384 (2005)

Chemical Hygiene Program

NASA Technical Reports Server (NTRS)

Mayor, Antoinette C.

1999-01-01

The Chemical Management Team is responsible for ensuring compliance with the OSHA Laboratory Standard. The program at Lewis Research Center (LeRC) evolved over many years to include training, developing Standard Operating Procedures (SOPS) for each laboratory process, coordinating with other safety and health organizations and teams at the Center, and issuing an SOP binder. The Chemical Hygiene Policy was first established for the Center. The Chemical Hygiene Plan was established and reviewed by technical, laboratory and management for viability and applicability to the Center. A risk assessment was conducted for each laboratory. The laboratories were prioritized by order of risk, higher risk taking priority. A Chemical Management Team staff member interviewed the lead researcher for each laboratory process to gather the information needed to develop the SOP for the process. A binder containing the Chemical Hygiene Plan, the SOP, a map of the laboratory identifying the personal protective equipment and best egress, and glove guides, as well as other guides for safety and health. Each laboratory process has been captured in the form of an SOP. The chemicals used in the procedure have been identified and the information is used to reduce the number of chemicals in the lab. The Chemical Hygiene Plan binder is used as a training tool for new employees. LeRC is in compliance with the OSHA Standard. The program was designed to comply with the OSHA standard. In the process, we have been able to assess the usage of chemicals in the laboratories, as well as reduce or relocate the chemicals being stored in the laboratory. Our researchers are trained on the hazards of the materials they work with and have a better understanding of the hazards of the process and what is needed to prevent any incident. From the SOP process, we have been able to reduce our chemical inventory, determine and implement better hygiene procedures and equipment in the laboratories, and provide

Hematological Evidence of Occupational Exposure to Chemicals and Other Factors among Auto-Repair Workers in Rawalpindi, Pakistan

PubMed Central

Kamal, Atif; Malik, Riffat Naseem

2012-01-01

Objectives Occupational exposure to aromatic solvents causes many serious health hazards to workers, especially if an ambient environment increases the exposure during routine working hours. This study was conducted on two related groups, i.e., automobile mechanics (MCs) and automobile spray painters (PNs), with an effort to analyze effects of chemical exposure on hematological parameters, keeping a focus on environmental parameters and workers’ personal behavioral characteristics that could be held responsible for increasing exposure risk. Methods A preliminary survey of various chemicals used in these places was done, and 78 blood samples were collected from three groups (control, n = 24; mechanics, n = 25; painters, n = 29). Demographic features of workers were recorded through a short questionnaire. Results Results showed that mean red blood cell (RBC) count was lower both in MCs [t(51) = 2.38, p < 0.021, r = 0.32] and in PNs [t(47) = 2.12, p < 0.03, r = 0.29], whereas mean hemoglobin (Hb) was significantly lower in MCs [t(51) = 2.5, p = 0.017, r = 0.33]. Combined data for exposed groups for smokers (SMs) versus nonsmokers (NSs) showed that SMs had a significantly lower number (RBC count: t(52) = 2.28, p < 0.027, r = 0.25; Hb count: t(52) = 2.71, p < 0.009, r = 0.30] of these parameters than NSs, even compared to the control group. Moreover, logistic regression results showed that smoking is a significant predictor of reduction in RBC and Hb counts, besides occupational exposure and work experience to a little extent among exposed workers. Mean white blood cell count [t(47) = 2.63, p < 0.01, r=0.35], mean corpuscle volume [t(47)= –2.82, p = 0.007, r = 0.29], and packed cell volume [t(47)= –2.28, p = 0.027, r = 31] were higher exclusively in painters, which could be related to exposure to benzene in addition to isocyanate. Conclusion It appeared that workplace exposure may be complex due to interaction of multiple factors and PNs face much more exposure to

Cryptosporidiosis outbreak at an academic animal research laboratory-Colorado, 2014.

PubMed

Hancock-Allen, Jessica; Alden, Nisha B; Cronquist, Alicia B

2017-02-01

After cryptosporidiosis was reported in three workers caring for preweaned calves at an academic research laboratory, we sought to identify cases, determine risk factors, and implement control measures. A cryptosporidiosis case was defined as diarrhea duration ≥72 hr, abdominal cramps, or vomiting in an animal research laboratory worker during July 14-July 31. A confirmed case had laboratory evidence of Cryptosporidium infection. Staff were interviewed regarding illness, potential exposures, training, and personal protective equipment (PPE) standard operating procedures (SOPs). The cryptosporidiosis attack rate (AR) was 74% (20/27); five were laboratory-confirmed. Median job training was 2 hr including respiratory-fit testing. No SOPs existed for doffing PPE. AR for workers who removed their gloves first was 84% (16/19) compared with 20% (1/5) for workers who removed gloves last (risk ratio = 4.2; P < 0.02). This outbreak highlights the importance of adequate training, enforced proper PPE procedures, and promoting a culture of safety. Am. J. Ind. Med. 60:208-214, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Dialysis, Albumin Binding, and Competitive Binding: A Laboratory Lesson Relating Three Chemical Concepts to Healthcare

ERIC Educational Resources Information Center

Domingo, Jennifer P.; Abualia, Mohammed; Barragan, Diana; Schroeder, Lianne; Wink, Donald J.; King, Maripat; Clark, Ginevra A.

2017-01-01

Introductory Chemistry laboratories must go beyond "cookbook" methods to illustrate how chemistry concepts apply to complex, real-world problems. In our case, we are preparing students to use their chemistry knowledge in the healthcare profession. The experiment described here explicitly models three important chemical concepts: dialysis…

The road to GHS: worker right-to-know in the 21st century.

PubMed

Karstadt, Myra L

2012-01-01

Of the three communications standards discussed, HI is definitely the outlier, as it emphasizes worker control of the process of identifying hazard and deemphasizes employer control of identification of hazards and dissemination of hazard information. GHS may not be as protective of American workers as HazCom is, but for workers in less-developed countries, where regulation of workplace health and safety is less strong than in the United States, Canada, many countries in Europe, and Japan, GHS--if adequately enforced-will likely represent an improvement in information on chemical hazards in the workplace. American workers may well see a decline in workplace protection against chemical hazards while protection may improve for workers in less-developed countries. This trade-off is part of the ongoing debate about globalization, of which worker protection from chemical hazards should be an important aspect. The next paper in this series will compare the proposed and final versions of GHS, and will discuss possible improvements to GHS to better serve American workers. As OSHA moves forward with the GHS rule, people and organizations concerned with worker right-to-know should consider possible improvements to GHS to better serve workers in the United States and worldwide.

Safety in the Chemical Laboratory

ERIC Educational Resources Information Center

Coffee, Robert D.

1972-01-01

The author discusses a system for establishing the relative potential of a chemical to release energy suddenly and to indicate release. This system is applicable to chemical storage and transportation. The system is based upon three simple tests requiring a minimum sample (1 go or 1 ml): (1) computation, (2) impact sensitivity, and (3) thermal…

Disability Support Workers' Knowledge and Education Needs about Psychotropic Medication

ERIC Educational Resources Information Center

Donley, Mandy; Chan, Jeffrey; Webber, Lynne

2012-01-01

Disability support workers are the predominant workforce employed to support people with an intellectual disability in Australia. Many support workers are required to assist people they support to take psychotropic medications in the form of chemical restraint. Support workers in Australia receive limited education and training in this area and as…

COMPARISON OF MICROBIAL TRANSFORMATION RATE COEFFICIENTS OF XENOBIOTIC CHEMICALS BETWEEN FIELD-COLLECTED AND LABORATORY MICROCOSM MICROBIOTA

EPA Science Inventory

Two second-order transformation rate coefficients--kb, based on total plate counts, and kA, based on periphyton-colonized surface areas--were used to compare xenobiotic chemical transformation by laboratory-developed (microcosm) and by field-collected microbiota. Similarity of tr...

Symptom-Based Versus Laboratory-Based Diagnosis of Five Sexually Transmitted Infections in Female Sex Workers in Iran.

PubMed

Shahesmaeili, Armita; Karamouzian, Mohammad; Shokoohi, Mostafa; Kamali, Kianoush; Fahimfar, Noushin; Nadji, Seyed Alireza; Sharifi, Hamid; Haghdoost, Ali Akbar; Mirzazadeh, Ali

2018-05-09

Among 1337 Iranian adult female sex workers in 2015, we assessed the diagnostic value of 4 self-reported sexually transmitted infection (STIs) symptoms for detecting laboratory-confirmed gonorrhea, chlamydia, trichomoniasis, human papillomavirus (HPV), and syphilis. While 37.7% reported vaginal discharge (VD), 25.9% reported pain or burning (P/B), 3.0% reported genital ulcers (GU), and 1.4% reported genital warts (GW), the prevalence of laboratory-confirmed syphilis, gonorrhea, chlamydia, trichomoniasis, and HPV was 0.4, 1.3, 6.0, 11.9, and 41.9%, respectively. The sensitivity of VD was 40.3% for detecting tricomoniasis, 37.5% for chlamydia, and 37.5% for gonorrhea. The sensitivity of P/B ranged from 12.5% for gonorrhea to 25.2% for trichomoniasis. The sensitivity of GU and GW was very low for 5 STIs. The sensitivity of all symptoms combined was also lower than 50%. Among asymptomatic participants, 41.2% tested positive for HPV, 11.8% for trichomoniasis, and less than 6.6% for other STIs. Symptom-based case management and surveillance of STIs can lead to misclassification of a large proportion of cases.

Doing Textiles Experiments in Game-Based Virtual Reality: A Design of the Stereoscopic Chemical Laboratory (SCL) for Textiles Education

ERIC Educational Resources Information Center

Lau, Kung Wong; Kan, Chi Wai; Lee, Pui Yuen

2017-01-01

Purpose: The purpose of this paper is to discuss the use of stereoscopic virtual technology in textile and fashion studies in particular to the area of chemical experiment. The development of a designed virtual platform, called Stereoscopic Chemical Laboratory (SCL), is introduced. Design/methodology/approach: To implement the suggested…

Undergraduate Organic Chemistry Laboratory Safety

NASA Astrophysics Data System (ADS)

Luckenbaugh, Raymond W.

1996-11-01

Each organic chemistry student should become familiar with the educational and governmental laboratory safety requirements. One method for teaching laboratory safety is to assign each student to locate safety resources for a specific class laboratory experiment. The student should obtain toxicity and hazardous information for all chemicals used or produced during the assigned experiment. For example, what is the LD50 or LC50 for each chemical? Are there any specific hazards for these chemicals, carcinogen, mutagen, teratogen, neurotixin, chronic toxin, corrosive, flammable, or explosive agent? The school's "Chemical Hygiene Plan", "Prudent Practices for Handling Hazardous Chemicals in the Laboratory" (National Academy Press), and "Laboratory Standards, Part 1910 - Occupational Safety and Health Standards" (Fed. Register 1/31/90, 55, 3227-3335) should be reviewed for laboratory safety requirements for the assigned experiment. For example, what are the procedures for safe handling of vacuum systems, if a vacuum distillation is used in the assigned experiment? The literature survey must be submitted to the laboratory instructor one week prior to the laboratory session for review and approval. The student should then give a short presentation to the class on the chemicals' toxicity and hazards and describe the safety precautions that must be followed. This procedure gives the student first-hand knowledge on how to find and evaluate information to meet laboartory safety requirements.

If You Don't Have a Good Laboratory, Find a Good Volcano: Mount Vesuvius as a Natural Chemical Laboratory in Eighteenth-Century Italy.

PubMed

Guerra, Corinna

2015-08-01

This essay that examines the role of the volcano as a chemical site in the late eighteenth century, as the "new chemistry" spread throughout the southern Italian Kingdom of Naples, resulting in lively debates. In Naples itself, these scientific debates were not confined to academies, courts, and urban spaces. In the absence of well-equipped chemical laboratories, Neapolitan scholars also carried out research on chemistry on the slopes of Mount Vesuvius, a natural site that furnished them with all the tools and substances necessary for practising chemistry. By examining various Neapolitan publications on Vesuvius and the chemical reactions and products associated with its periodic eruptions, I argue that the volcano's presence contributed to a distinctive, local approach to chemical theory and practice. Several case studies examine the ways in which proximity to Vesuvius was exploited by Neapolitan scholars as they engaged with the new chemistry, including Giuseppe Vairo, Michele Ferrara, Francesco Semmola, and Emanuele Scotti.

Infections in British clinical laboratories, 1986-87.

PubMed

Grist, N R; Emslie, J A

1989-07-01

During 1986-87 this continuing survey showed 15 specific infections in the staff of 235 laboratories, representing 28,524 person years of exposure. The community was the probable source of four of the five cases of tuberculosis and one of the five cases of salmonellosis. Occupational exposure was the probable cause of four infections by Shigella flexneri, three by Salmonella typhimurium, and one by S typhi, all affecting medical laboratory scientific officers (MLSOs) in microbiology. Occupational exposure was also the probable cause of one case of tuberculosis in a mortuary technician and one of probable non-A, non-B hepatitis in a medical laboratory scientific officer haematology worker. The overall incidence of reported infections was 52.6/100,000 person years (35/100,000 for infections of probable occupational origin). The highest rates of laboratory acquired infections related to MLSO microbiology workers and mortuary technicians. No additional infections were seen as a result of extending the survey to forensic laboratories.

Chemical evolution of Macondo crude oil during laboratory degradation as characterized by fluorescence EEMs and hydrocarbon composition.

PubMed

Zhou, Zhengzhen; Liu, Zhanfei; Guo, Laodong

2013-01-15

The fluorescence EEM technique, PARAFAC modeling, and hydrocarbon composition were used to characterize oil components and to examine the chemical evolution and degradation pathways of Macondo crude oil under controlled laboratory conditions. Three major fluorescent oil components were identified, with Ex/Em maxima at 226/328, 262/315, and 244/366 nm, respectively. An average degradation half-life of ∼20 d was determined for the oil components based on fluorescence EEM and hydrocarbon composition measurements, showing a dynamic chemical evolution and transformation of the oil during degradation. Dispersants appeared to change the chemical characteristics of oil, to shift the fluorescence EEM spectra, and to enhance the degradation of low-molecular-weight hydrocarbons. Photochemical degradation played a dominant role in the transformation of oil components, likely an effective degradation pathway of oil in the water column. Results from laboratory experiments should facilitate the interpretation of field-data and provide insights for understanding the fate and transport of oil components in the Gulf of Mexico. Copyright © 2012 Elsevier Ltd. All rights reserved.

3D chemical imaging in the laboratory by hyperspectral X-ray computed tomography

PubMed Central

Egan, C. K.; Jacques, S. D. M.; Wilson, M. D.; Veale, M. C.; Seller, P.; Beale, A. M.; Pattrick, R. A. D.; Withers, P. J.; Cernik, R. J.

2015-01-01

We report the development of laboratory based hyperspectral X-ray computed tomography which allows the internal elemental chemistry of an object to be reconstructed and visualised in three dimensions. The method employs a spectroscopic X-ray imaging detector with sufficient energy resolution to distinguish individual elemental absorption edges. Elemental distributions can then be made by K-edge subtraction, or alternatively by voxel-wise spectral fitting to give relative atomic concentrations. We demonstrate its application to two material systems: studying the distribution of catalyst material on porous substrates for industrial scale chemical processing; and mapping of minerals and inclusion phases inside a mineralised ore sample. The method makes use of a standard laboratory X-ray source with measurement times similar to that required for conventional computed tomography. PMID:26514938

An Alternative Educational Approach for an Inorganic Chemistry Laboratory Course in Industrial and Chemical Engineering

ERIC Educational Resources Information Center

Garces, Andres; Sanchez-Barba, Luis Fernando

2011-01-01

We describe an alternative educational approach for an inorganic chemistry laboratory module named "Experimentation in Chemistry", which is included in Industrial Engineering and Chemical Engineering courses. The main aims of the new approach were to reduce the high levels of failure and dropout on the module and to make the content match the…

Assessment of Application Technology of Natural User Interfaces in the Creation of a Virtual Chemical Laboratory

NASA Astrophysics Data System (ADS)

Jagodziński, Piotr; Wolski, Robert

2015-02-01

Natural User Interfaces (NUI) are now widely used in electronic devices such as smartphones, tablets and gaming consoles. We have tried to apply this technology in the teaching of chemistry in middle school and high school. A virtual chemical laboratory was developed in which students can simulate the performance of laboratory activities similar to those that they perform in a real laboratory. Kinect sensor was used for the detection and analysis of the student's hand movements, which is an example of NUI. The studies conducted found the effectiveness of educational virtual laboratory. The extent to which the use of a teaching aid increased the students' progress in learning chemistry was examined. The results indicate that the use of NUI creates opportunities to both enhance and improve the quality of the chemistry education. Working in a virtual laboratory using the Kinect interface results in greater emotional involvement and an increased sense of self-efficacy in the laboratory work among students. As a consequence, students are getting higher marks and are more interested in the subject of chemistry.

Glymes as Versatile Solvents for Chemical Reactions and Processes: from the Laboratory to Industry

PubMed Central

Tang, Shaokun; Zhao, Hua

2014-01-01

Glymes, also known as glycol diethers, are saturated non-cyclic polyethers containing no other functional groups. Most glymes are usually less volatile and less toxic than common laboratory organic solvents; in this context, they are more environmentally benign solvents. However, it is also important to point out that some glymes could cause long-term reproductive and developmental damages despite their low acute toxicities. Glymes have both hydrophilic and hydrophobic characters that common organic solvents are lack of. In addition, they are usually thermally and chemically stable, and can even form complexes with ions. Therefore, glymes are found in a broad range of laboratory applications including organic synthesis, electrochemistry, biocatalysis, materials, and Chemical Vapor Deposition (CVD), etc. In addition, glyme are used in numerous industrial applications, such as cleaning products, inks, adhesives and coatings, batteries and electronics, absorption refrigeration and heat pumps, as well as pharmaceutical formulations, etc. However, there is a lack of comprehensive and critical review on this attractive subject. This review aims to accomplish this task by providing an in-depth understanding of glymes’ physicochemical properties, toxicity and major applications. PMID:24729866

Transfer of chlorfenapyr among workers of Reticulitermes flavipes (Isoptera: Rhinotermitidae) in the laboratory

Treesearch

Thomas G. Shelton; Joseph E. Mulroonery; Terence L. Wagner

2006-01-01

The potential for transfer of chlorfenapyr among subterranean termites was investigated using a donor-recipient (5:95 ratio) experiment. In one experiment, workers of Reticulitermes flavipeS(Kollar) (Isoptera: Rhinotermitidae) were exposed to treated sand at 0,50,100,250, and 500 ppm chlorfenapyr (wt [AI] /wt sand). Exposed workers were allowed to...

Chemistry laboratory safety manual available

NASA Technical Reports Server (NTRS)

Elsbrock, R. G.

1968-01-01

Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.

Can post-eradication laboratory containment of wild polioviruses be achieved?

PubMed Central

Dowdle, Walter R.; Gary, Howard E.; Sanders, Raymond; van Loon, Anton M.

2002-01-01

The purpose of containment is to prevent reintroduction of wild polioviruses from laboratories into polio-free communities. In order to achieve global commitment to laboratory containment the rationale should be clear and compelling; the biosafety levels should be justified by the risks; and the objectives should be realistic. Absolute containment can never be assured. Questions of intentional or unintentional non-compliance can never be wholly eliminated. Effective laboratory containment is, however, a realistic goal. Prevention of virus transmission through contaminated laboratory materials is addressed by WHO standards for biosafety. The principal challenge is to prevent transmission through unrecognized infectious laboratory workers. Such transmission is possible only if the following conditions occur: infectious and potentially infectious materials carrying wild poliovirus are present in the laboratory concerned; a laboratory operation exposes a worker to poliovirus; a worker is susceptible to an infection that results in the shedding of poliovirus; and the community is susceptible to poliovirus infections. At present it is difficult to envisage the elimination of any of these conditions. However, the risks of the first three can be greatly reduced so as to create a formidable barrier against poliovirus transmission to the community. Final biosafety recommendations must await post-eradication immunization policies adopted by the international community. PMID:12075368

Worker honey bee pheromone regulation of foraging ontogeny

NASA Astrophysics Data System (ADS)

Pankiw, Tanya

The evolution of sociality has configured communication chemicals, called primer pheromones, which play key roles in regulating the organization of social life. Primer pheromones exert relatively slow effects that fundamentally alter developmental, physiological, and neural systems. Here, I demonstrate how substances extracted from the surface of foraging and young pre-foraging worker bees regulated age at onset of foraging, a developmental process. Hexane-extractable compounds washed from foraging workers increased foraging age compared with controls, whereas extracts of young pre-foraging workers decreased foraging age. This represents the first known direct demonstration of primer pheromone activity derived from adult worker bees.

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

ERIC Educational Resources Information Center

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

Honey Bee (Apis mellifera) Queen Reproductive Potential Affects Queen Mandibular Gland Pheromone Composition and Worker Retinue Response.

PubMed

Rangel, Juliana; Böröczky, Katalin; Schal, Coby; Tarpy, David R

2016-01-01

Reproductive division of labor is one of the defining traits of honey bees (Apis mellifera), with non-reproductive tasks being performed by workers while a single queen normally monopolizes reproduction. The decentralized organization of a honey bee colony is maintained in large part by a bouquet of queen-produced pheromones, the distribution of which is facilitated by contact among workers throughout the hive. Previous studies have shown that the developmental fate of honey bee queens is highly plastic, with queens raised from younger worker larvae exhibiting higher measures of reproductive potential compared to queens raised from older worker larvae. We investigated differences in the chemical composition of the mandibular glands and attractiveness to workers of "high-quality" queens (i.e., raised from first instar worker larvae; more queen-like) and "low-quality" queens (i.e., raised from third instar worker larvae; more worker-like). We characterized the chemical profiles of the mandibular glands of high-quality queens and low-quality queens using GC-MS and used the worker retinue response as a measure of the attractiveness to workers of high-quality queens vs. low-quality queens. We found that queen quality affected the chemical profiles of mandibular gland contents differently across years, showing significant differences in the production of the queen mandibular pheromone ("QMP") components HVA and 9-HDA in 2010, but no significant differences of any glandular compound in 2012. We also found that workers were significantly more attracted to high-quality queens than to low-quality queens in 2012, possibly because of increased attractiveness of their mandibular gland chemical profiles. Our results indicate that the age at which honey bee larvae enter the "queen-specific" developmental pathway influences the chemical composition of queen mandibular glands and worker behavior. However, these changes are not consistent across years, suggesting that other external

Impacts of Health and Safety Education: Comparison of Worker Activities Before and After Training

PubMed Central

Becker, Paul; Morawetz, John

2014-01-01

Background The International Chemical Workers Union Council (ICWUC) Center for Worker Health and Safety Education in Cincinnati, Ohio, trains workers to protect themselves from hazards due to chemical spills and other chemical exposures. We evaluated whether the ICWUC Hazardous Waste Worker Training Program affects the attitudes and post-training activities, of trained union workers. Methods Detailed survey questionnaires were administered to 55 workers prior to and 14–18 months following training. Surveys queried trainees’ interest and involvement in safety and health, use of information resources, training activities at their worksite, and their attempts and successes at making worksite improvements. Results Post-training, the study population showed an increase in training of other workers, use of resources, attempts at improvements, success rates for those attempting change, and overall success at making improvements. Self-reported interest decreased, and self reported involvement in health and safety did not significantly change. Conclusion The study demonstrates that workers are more willing to attempt to change worksite conditions following training, and that their efficacy at making changes is substantially greater than before they were trained. The study confirms earlier work and strengthens these conclusions by using statistically tested comparisons of impact measures pre- and post-training. PMID:15202126

78 FR 52981 - Investigations Regarding Eligibility to Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

...-- Tulsa, OK 08/02/13 08/01/13 Wholesale Customer Application Support Team (Workers). 82953 Abbott Laboratories, Santa Clara, CA........ 08/02/13 08/01/13 including on-site leased workers from ATR Int'l (State...

Safety in the Chemical Laboratory

ERIC Educational Resources Information Center

Steere, Norman V., Ed.

1973-01-01

Suggests laboratory instructors preserve the necessary evidence after an incident in classroom. Included is a checklist for gathering evidence that trial lawyers will need to present defense adequately. (CC)

Mortality of Munitions Workers Exposed to Dinitrotuluene

DTIC Science & Technology

1986-01-01

ACCESSION NO . 3. RECIPIENT’S CATALOG NUMBER 4. TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVERED L MORTALITY OF MUNITIONS WORKERS EXPOSED...AD__ _ _ _ _ _ o MORTALITY OF MUNITIONS WORKERS tO EXPOSED TO DINITROTOLUENE Um FINAL REPORT Richard J. Levine, Dragana A. Andjelkovich, Sharon...Kersteter, Earl W. Arp, Jr., Sandor A. Balogh, Patricia B. Blunden, and Jonathan M. Stanley Chemical Industry Institute of Toxicology Research Triangle

Sister-chromatid exchanges and cell-cycle kinetics in the lymphocytes of workers occupationally exposed to a chemical mixture in the tyre industry.

PubMed

Sasiadek, M

1993-08-01

Cytogenetic studies of clinically healthy workers employed in the rubber industry showed an increase in chromosome aberrations (CAs), sister-chromatid exchanges (SCEs) and a decrease in proliferation indices (PIs). The aim of the present study was to establish, using the SCE and PI tests, genotoxic effects of hazardous chemicals in the rubber industry. An increase in mean SCEs in the lymphocytes of vulcanizers as compared to controls was observed. Since the PI in the exposed group was insignificantly decreased as compared to the controls, it could be concluded that the SCE test is the most sensitive cytogenetic test for the detection of a genotoxic effect of chemicals in the rubber industry. There was no evidence in the present study that the genotoxic effect of chemicals in the rubber industry was enhanced by cigarette smoking.

CLINICAL FINDINGS OF IRRITATION AMONG CHROMIUM CHEMICAL PRODUCTION WORKERS

EPA Science Inventory

Background
Several reports of workers in chromate production and chromeplating have indicated that exposure to hexavalent chromium is assoc...

Reproductive Outcomes Among Male and Female Workers at an Aluminum Smelter

PubMed Central

Sakr, Carine J.; Taiwo, Oyebode A.; Galusha, Deron H.; Slade, Martin D.; Fiellin, Martha G.; Bayer, Felicia; Savitz, David A.; Cullen, Mark R.

2010-01-01

Objectives Several adverse pregnancy outcomes were reported among female laboratory workers in a North American aluminum smelter. To determine whether these outcomes were associated with any occupational exposure at the plant, a cross sectional survey was undertaken. Methods Rates of miscarriage, premature singleton birth, and major congenital anomaly occurring during employment were compared to a reference group comprised of all pregnancies that occurred prior to employment. Results Among female workers, the excess of congenital anomalies among female laboratory workers that defined the initial cluster was observed, but no specific pattern was found. Conclusions Based on these analyses, the increase in congenital anomalies could not be attributed to occupational exposures at the smelter, nor could potential exposure likely explain the diverse anomalies described. PMID:20134342

Worker policing by egg eating in the ponerine ant Pachycondyla inversa.

PubMed

D'Ettorre, Patrizia; Heinze, Jürgen; Ratnieks, Francis L W

2004-07-07

We investigated worker policing by egg eating in the ponerine ant Pachycondyla inversa, a species with morphologically distinct queens and workers. Colonies were split into one half with the queen and one half without. Workers in queenless colony fragments started laying unfertilized male eggs after three weeks. Worker-laid eggs and queen-laid eggs were introduced into five other queenright colonies with a single queen and three colonies with multiple queens, and their fate was observed for 30 min. Significantly more worker-laid eggs (range of 35-62%, mean of 46%) than queen-laid eggs (range of 5-31%, mean of 15%) were eaten by workers in single-queen colonies, and the same trend was seen in multiple-queen colonies. This seems to be the first well-documented study of ants with a distinct caste polymorphism to show that workers kill worker-laid eggs in preference to queen-laid eggs. Chemical analyses showed that the surfaces of queen-laid and worker-laid eggs have different chemical profiles as a result of different relative proportions of several hydrocarbons. Such differences might provide the information necessary for differential treatment of eggs. One particular alkane, 3,11-dimeC27, was significantly more abundant on the surfaces of queen-laid eggs. This substance is also the most abundant compound on the cuticles of egg layers.

Outbreak of Severe Histoplasmosis Among Tunnel Workers-Dominican Republic, 2015.

PubMed

Armstrong, Paige A; Beard, John D; Bonilla, Luis; Arboleda, Nelson; Lindsley, Mark D; Chae, Sae-Rom; Castillo, Delia; Nuñez, Ramona; Chiller, Tom; de Perio, Marie A; Pimentel, Raquel; Vallabhaneni, Snigdha

2018-05-02

Histoplasmosis is a fungal infection associated with exposure to bat guano. An outbreak of an unknown severe febrile illness occurred among tunnel workers in the Dominican Republic, and resulted in several deaths. We conducted an investigation to confirm etiology and recommend control measures. A case was defined as fever and ≥2 symptoms consistent with histoplasmosis in a tunnel worker, July-September 2015. We interviewed workers and family members, reviewed medical records, tested serum and urine for Histoplasma antigen/antibody, and conducted a cohort study to identify risk factors for histoplasmosis and severe infection (intensive care). A crew of 36 male workers removed large amounts of bat guano from tunnels without respiratory protection for a median of 24 days per worker (range, 1-25 days). Median age was 32 years (range, 18-62 years); none were immunocompromised. Thirty (83%) workers had illness that met the case definition, of whom 28 (93%) were hospitalized, 9 (30%) required intensive care, 6 (20%) required intubation, and 3 (10%) died. The median time from symptom onset to antifungal treatment was 6 days (range, 1-11 days). Twenty-two of 34 (65%) workers had laboratory evidence of infection. Severe illnesses and death likely resulted from exposure to large inocula of Histoplasma capsulatum spores in an enclosed space, lack of respiratory protection, and delay in recognition and treatment. Clinician education about histoplasmosis, improved laboratory capacity to diagnose fungal infections, and occupational health guidance to protect workers against endemic fungi are recommended in the Dominican Republic.

The Past Informs the Future: An Overview of the Million Worker Study and the Mallinckrodt Chemical Works Cohort.

PubMed

Boice, John D; Ellis, Elizabeth D; Golden, Ashley P; Girardi, David J; Cohen, Sarah S; Chen, Heidi; Mumma, Michael T; Shore, Roy E; Leggett, Richard W

2018-04-01

The purpose of this paper is to present an overview of ongoing work on the Million Worker Study (MWS), highlighting some of the key methods and progress so far as exemplified by the study of workers at the Mallinckrodt Chemical Works (MCW). The MWS began nearly 25 y ago and continues in a stepwise fashion, evaluating one study cohort at a time. It includes workers from U.S. Department of Energy (DOE) Manhattan Project facilities, U.S. Nuclear Regulatory Commission (NRC) regulated nuclear power plants, industrial radiographers, U.S. Department of Defense (DoD) nuclear weapons test participants, and physicians and technologists working with medical radiation. The purpose is to fill the major gap in radiation protection and science: What is the risk when exposure is received gradually over time rather than briefly as for the atomic bomb survivors? Studies published or planned in 2018 include leukemia (and dosimetry) among atomic veterans, leukemia among nuclear power plant workers, mortality among workers at the MCW, and a comprehensive National Council on Radiation Protection and Measurements (NCRP) Report on dosimetry for the MWS. MCW has a singular place in history: the 40 tons (T) of uranium oxide produced at MCW were used by Enrico Fermi on 2 December 1942 to produce the first manmade sustained and controlled nuclear reaction, and the atomic age was born. Seventy-six years later, the authors followed the over 2,500 MCW workers for mortality and reconstructed dose from six sources of exposure: external gamma rays from the radioactive elements in pitchblende; medical x rays from occupationally required chest examinations; intakes of pitchblende (uranium, radium, and silica) measured by urine samples; radon breath analyses and dust surveys overseen by Robley Evans and Merril Eisenbud; occupational exposures received before and after employment at MCW; and cumulative radon concentrations and lung dose from the decay of radium in the work environment. The unique

Take immediate action to protect communities and workers.

PubMed

Wilding, Roberta Chase; Lewis, Sharon E

2007-01-01

In many areas throughout America, thousands of industrial and military facilities and agricultural operations put large numbers of people at risk of serious injury or death due to accidental chemical releases, explosions, fires, and grossly inadequate occupational exposure standards. While some companies are moving toward "greener" production, many others do the minimum required by government agencies. As evidenced by the thousands of permit violations and accidental releases of hazardous chemicals, this means that facilities across the country consistently fail to meet regulations, incorporating the cost of fines and penalties into the cost of doing business and passing that cost on to consumers. Workers at such facilities and residents of the surrounding communities cannot wait for the eventual implementation and enforcement of federal environmental laws or adequate testing of the effect chemicals may have on the human population. Immediate action is needed to protect communities and workers at risk from chemical exposures that can compromise their health.

Directory of Credit-Granting Policies in Medical Laboratory Education.

ERIC Educational Resources Information Center

National Committee for Careers in Medical Technology, Bethesda, MD.

Ways now exist for medical laboratory workers to advance up the educational career ladder, gaining credit for prior training and/or experience. A total of 369 Certified Medical Laboratory Assistant Schools, colleges with Associate Degree Medical Laboratory Technicians programs, schools of Medical Technology, and colleges with baccalaureate Medical…

Reproductive parasitism by worker honey bees suppressed by queens through regulation of worker mandibular secretions.

PubMed

Mumoki, Fiona N; Pirk, Christian W W; Yusuf, Abdullahi A; Crewe, Robin M

2018-05-24

Social cohesion in social insect colonies can be achieved through the use of chemical signals whose production is caste-specific and regulated by social contexts. In honey bees, queen mandibular gland pheromones (QMP) maintain reproductive dominance by inhibiting ovary activation and production of queen-like mandibular gland signals in workers. We investigated whether honey bee queens can control reproductively active workers of the intraspecific social parasite Apis mellifera capensis, parasitising A. m. scutellata host colonies. Our results show that the queen's QMP suppresses ovarian activation and inhibits the production of QMP pheromone signals by the parasitic workers, achieved through differential expression of enzymes involved in the biosynthesis of these pheromones at two points in the biosynthetic pathway. This is the first report showing that honey bee queens can regulate reproduction in intraspecific social parasites and deepens our understanding of the molecular mechanisms involved in the regulation of worker reproduction in social insects.

Fixed obstructive lung disease among workers in the flavor-manufacturing industry--California, 2004-2007.

PubMed

2007-04-27

Bronchiolitis obliterans, a rare and life-threatening form of fixed obstructive lung disease, is known to be caused by exposure to noxious gases in occupational settings and has been described in workers in the microwave-popcorn industry who were exposed to artificial butter-flavoring chemicals, including diacetyl. In August 2004, the California Department of Health Services (CDHS) and Division of Occupational Safety and Health (Cal/OSHA) received the first report of a bronchiolitis obliterans diagnosis in a flavor-manufacturing worker in California. In April 2006, a second report was received of a case in a flavor-manufacturing worker from another company. Neither worker was employed in the microwave-popcorn industry; both were workers in the flavor-manufacturing industry, which produces artificial butter flavoring and other flavors such as cherry, almond, praline, jalapeno, and orange. Both workers had handled pure diacetyl, an ingredient in artificial butter and other flavorings, and additional chemicals involved in the manufacturing process. Studies have indicated that exposure to diacetyl causes severe respiratory epithelial injury in animals. Because the manufacture of flavorings involves more than 2,000 chemicals, workers in the general flavor-manufacturing industry are exposed to more chemicals than workers in the microwave-popcorn industry, which primarily uses butter flavorings. Food flavorings are designated "generally recognized as safe" when approved by the U.S. Food and Drug Administration; flavorings are not known to put consumers at risk for lung disease. This report describes the first two cases of bronchiolitis obliterans in flavor-manufacturing workers in California, the findings of the public health investigation, and the actions taken by state and federal agencies to prevent future cases of occupational bronchiolitis obliterans. To identify cases and reduce risk for lung disease from occupational exposure to flavorings, a timely, effective

Individual recognition and learning of queen odors by worker honeybees

PubMed Central

Breed, Michael D.

1981-01-01

A honeybee queen is usually attacked if she is placed among the workers of a colony other than her own. This rejection occurs even if environmental sources of odor, such as food, water, and genetic origin of the workers, are kept constant in laboratory conditions. The genetic similarity of queens determines how similar their recognition characteristics are; inbred sister queens were accepted in 35% of exchanges, outbred sister queens in 12%, and nonsister queens in 0%. Carbon dioxide narcosis results in worker honeybees accepting nonnestmate queens. A learning curve is presented, showing the time after narcosis required by workers to learn to recognize a new queen. In contrast, worker transfers result in only a small percentage of the workers being rejected. The reason for the difference between queens and workers may be because of worker and queen recognition cues having different sources. PMID:16593008

Honey Bee (Apis mellifera) Queen Reproductive Potential Affects Queen Mandibular Gland Pheromone Composition and Worker Retinue Response

PubMed Central

Böröczky, Katalin; Schal, Coby; Tarpy, David R.

2016-01-01

Reproductive division of labor is one of the defining traits of honey bees (Apis mellifera), with non-reproductive tasks being performed by workers while a single queen normally monopolizes reproduction. The decentralized organization of a honey bee colony is maintained in large part by a bouquet of queen-produced pheromones, the distribution of which is facilitated by contact among workers throughout the hive. Previous studies have shown that the developmental fate of honey bee queens is highly plastic, with queens raised from younger worker larvae exhibiting higher measures of reproductive potential compared to queens raised from older worker larvae. We investigated differences in the chemical composition of the mandibular glands and attractiveness to workers of “high-quality” queens (i.e., raised from first instar worker larvae; more queen-like) and “low-quality” queens (i.e., raised from third instar worker larvae; more worker-like). We characterized the chemical profiles of the mandibular glands of high-quality queens and low-quality queens using GC-MS and used the worker retinue response as a measure of the attractiveness to workers of high-quality queens vs. low-quality queens. We found that queen quality affected the chemical profiles of mandibular gland contents differently across years, showing significant differences in the production of the queen mandibular pheromone (“QMP”) components HVA and 9-HDA in 2010, but no significant differences of any glandular compound in 2012. We also found that workers were significantly more attracted to high-quality queens than to low-quality queens in 2012, possibly because of increased attractiveness of their mandibular gland chemical profiles. Our results indicate that the age at which honey bee larvae enter the “queen-specific” developmental pathway influences the chemical composition of queen mandibular glands and worker behavior. However, these changes are not consistent across years, suggesting

Occupational risk assessment of paint industry workers

PubMed Central

de Oliveira, Hugo M.; Dagostim, Gracilene P.; da Silva, Arielle Mota; Tavares, Priscila; da Rosa, Luiz A. Z. C.; de Andrade, Vanessa M.

2011-01-01

Background: Thousands of chemical compounds are used in paint products, like pigments, extenders, binders, additives, and solvents (toluene, xylene, ketones, alcohols, esters, and glycol ethers). Paint manufacture workers are potentially exposed to the chemicals present in paint products although the patterns and levels of exposure to individual agents may differ from those of painters. The aim of the present study was to evaluate genome damage induced in peripheral blood lymphocytes and oral mucosa cells of paint industry workers. Materials and Methods: Genotoxicity was evaluated using the alkaline Comet assay in blood lymphocytes and oral mucosa cells, and the Micronucleus test in oral mucosa cells. For the micronucleus test in exfoliated buccal cells, no significant difference was detected between the control and paint industry workers. Results: The Comet assay in epithelia buccal cells showed that the damage index (DI) and damage frequency (DF) observed in the exposed group were significantly higher relative to the control group (P≤0.05). In the same way, the Comet assay data in peripheral blood leukocytes showed that both analysis parameters (DI and DF) were significantly greater than that for the control group (P≤0.05). Conclusions: Chronic occupational exposure to paints may lead to a slightly increased risk of genetic damage among paint industry workers. PMID:22223950

Temporal Assessment of Molting in Workers of Formosan Subterranean Termites (Isoptera: Rhinotermitidae).

PubMed

Kakkar, G; Chouvenc, T; Osbrink, W; Su, N-Y

2016-10-01

Molt frequency of workers in laboratory-reared juvenile colonies and foraging population from field colonies of Coptotermes formosanus Shiraki was determined using planar arenas in laboratory. Given that, chitin synthesis inhibitor (CSI)-incorporated baits disrupt the molting process of workers that comprises the major population of a termite colony, temporal assessment of molting frequency in workers can give insights into potential methods of reducing the time to eliminate a CSI-baited colony. In our study the 10-d observation of juvenile colonies of C. formosanus suggested average daily molting incidence of workers in a colony is 1.7 ±  0.3% (mean ± SD). The results from a time lapse study on foraging population of workers showed that on average there is a 44-d intermolt period for second-instar workers molting to third instar and 45 d for third-instar workers molting to fourth instar. At low temperature (21 °C), molting frequency of workers (0.6% per day) was significantly lower than that of workers at 27 °C (2.2% per day). Information from this study suggests that time to molt is an important component of total time for eliminating colonies treated with CSI baits and reduction in time lapse between two consecutive molts may reduce the time required for colony elimination. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Evaluation of modeled cloud chemistry mechanism against laboratory irradiation experiments: The HxOy/iron/carboxylic acid chemical system

NASA Astrophysics Data System (ADS)

Long, Yoann; Charbouillot, Tiffany; Brigante, Marcello; Mailhot, Gilles; Delort, Anne-Marie; Chaumerliac, Nadine; Deguillaume, Laurent

2013-10-01

Currently, cloud chemistry models are including more detailed and explicit multiphase mechanisms based on laboratory experiments that determine such values as kinetic constants, stability constants of complexes and hydration constants. However, these models are still subject to many uncertainties related to the aqueous chemical mechanism they used. Particularly, the role of oxidants such as iron and hydrogen peroxide in the oxidative capacity of the cloud aqueous phase has typically never been validated against laboratory experimental data. To fill this gap, we adapted the M2C2 model (Model of Multiphase Cloud Chemistry) to simulate irradiation experiments on synthetic aqueous solutions under controlled conditions (e.g., pH, temperature, light intensity) and for actual cloud water samples. Various chemical compounds that purportedly contribute to the oxidative budget in cloud water (i.e., iron, oxidants, such as hydrogen peroxide: H2O2) were considered. Organic compounds (oxalic, formic and acetic acids) were taken into account as target species because they have the potential to form iron complexes and are good indicators of the oxidative capacity of the cloud aqueous phase via their oxidation in this medium. The range of concentrations for all of the chemical compounds evaluated was representative of in situ measurements. Numerical outputs were compared with experimental data that consisted of a time evolution of the concentrations of the target species. The chemical mechanism in the model describing the “oxidative engine” of the HxOy/iron (HxOy = H2O2, HO2rad /O2rad - and HOrad ) chemical system was consistent with laboratory measurements. Thus, the degradation of the carboxylic acids evaluated was closely reproduced by the model. However, photolysis of the Fe(C2O4)+ complex needs to be considered in cloud chemistry models for polluted conditions (i.e., acidic pH) to correctly reproduce oxalic acid degradation. We also show that iron and formic acid lead to

Comparison of the Physical and Chemical Properties of Laboratory and Field-Aged Biochars.

PubMed

Bakshi, Santanu; Aller, Deborah M; Laird, David A; Chintala, Rajesh

2016-09-01

The long-term impact of biochar on soil properties and agronomic outcomes is influenced by changes in the physical and chemical properties of biochars that occur with time (aging) in soil environments. Fresh biochars, however, are often used in studies because aged biochars are generally unavailable. Therefore, a need exists to develop a method for rapid aging of biochars in the laboratory. The objectives of this study were to compare the physicochemical properties of fresh, laboratory-aged (LA), and field-aged (FA) (≥3 yr) biochars and to assess the appropriateness of a laboratory aging procedure that combines acidification, oxidation, and incubations as a mimic to field aging in neutral or acidic soil environments. Twenty-two biochars produced by fast and slow pyrolysis, and gasification techniques from five different biomass feedstocks (hardwood, corn stover, soybean stover, macadamia nut shells, and switchgrass) were studied. In general, both laboratory and field aging caused similar increases in ash-free volatile matter (% w/w), cation and anion exchange capacities, specific surface area, and modifications in oxygen-containing surface functional groups of the biochars. However, ash content increased for FA (18-195%) and decreased for LA (22-74%) biochars, and pH decreased to a greater extent for LA (2.8-6.7 units) than for FA (1.6-3.8 units) biochars. The results demonstrate that the proposed laboratory aging procedure is effective for predicting the direction of changes in biochar properties on field aging. However, in the future we recommend using a less aggressive acid treatment. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Exposure of Laboratory Workers to Francisella tularensis despite a Bioterrorism Procedure

PubMed Central

Shapiro, Daniel S.; Schwartz, Donald R.

2002-01-01

A rapidly fatal case of pulmonary tularemia in a 43-year-old man who was transferred to a tertiary care facility is presented. The microbiology laboratory and autopsy services were not notified of the clinical suspicion of tularemia by the service caring for the patient. Despite having a laboratory bioterrorism procedure in place and adhering to established laboratory protocol, 12 microbiology laboratory employees were exposed to Francisella tularensis and the identification of the organism was delayed due to lack of notification of the laboratory of the clinical suspicion of tularemia. A total of 11 microbiology employees and two persons involved in performing the patient's autopsy received prophylactic doxycycline due to concerns of transmission. None of them developed signs or symptoms of tularemia. One microbiology laboratory employee was pregnant and declined prophylactic antibiotics. As a result of this event, the microbiology laboratory has incorporated flow charts directly into the bench procedures for several highly infectious agents that may be agents of bioterrorism. This should permit more rapid recognition of an isolate for referral to a Level B laboratory for definitive identification and should improve laboratory safety. PMID:12037110

Undergraduate Chemistry Laboratory

ERIC Educational Resources Information Center

Bretz, Stacey Lowery; Fay, Michael; Bruck, Laura B.; Towns, Marcy H.

2013-01-01

Forty chemistry faculty from American Chemical Society-approved departments were interviewed to determine their goals for undergraduate chemistry laboratory. Faculty were stratified by type of institution, departmental success with regard to National Science Foundation funding for laboratory reform, and level of laboratory course. Interview…

Early results of urothelial carcinoma screening in a risk population of coke workers: urothelial carcinoma among coke workers.

PubMed

Giberti, C; Gallo, F; Schenone, M; Genova, A

2010-08-01

To present the protocol and the early results of a urothelial carcinoma (UC) screening analysis performed in a risk population of coke workers. Between June 2006 and October 2008, 171 male workers (mean age 43 years), employed in a Ligurian coke plant (Italiana Coke S.r.l) and exposed to polycyclic aromatic hydrocarbons (PAHs) for a median period of 16 years, underwent screening for UC. Urological evaluation included medical history, physical examination, routine laboratory tests, urine analysis, urinary cytology and uCyt+ assay. In the event of signs and symptoms suggestive of UC or positive urinary tests, the workers were also subjected to urinary ultrasonography and cystoscopy with biopsy of any suspicious lesions. Regarding the laboratory tests, 19/171 (11%) uCyt+ samples were considered inadequate and were excluded from the outcomes assessment. Overall, urine analysis, cytology and uCyt+ were positive in 18/152 (12%) subjects who showed no evidence of UC at the scheduled check-ups. No significant association was identified between marker positivity and occupational activity. Our results fail to show an increased risk of UC among the coke workers evaluated. However, they will need to be confirmed in the future by a larger enrollment and a longer follow-up in order to assess the definitive risk for UC after exposure to coke. Copyright © 2010 The Editorial Board of Biomedical and Environmental Sciences. Published by Elsevier B.V. All rights reserved.

Do Bumble Bee, Bombus impatiens, Queens Signal their Reproductive and Mating Status to their Workers?

PubMed

Amsalem, Etya; Padilla, Mario; Schreiber, Paul M; Altman, Naomi S; Hefetz, Abraham; Grozinger, Christina M

2017-06-01

Reproduction in social insect societies reflects a delicate balance between cooperation and conflict over offspring production, and worker reproduction is widespread even in species showing strong reproductive skew in favor of the queen. To navigate these conflicts, workers are predicted to develop the means to estimate the queen's fecundity - potentially through behavioral and/or chemical cues - and to adjust their reproduction to maximize their fitness. Here, we introduced bumble bee, Bombus impatiens, workers to queens of different mating and reproductive status and examined worker reproduction and expression levels of two genes which were previously shown to be sensitive to the presence of the queen, vitellogenin and Krüppel-homolog 1. We further explored whether the queen's chemical secretion alone is sufficient to regulate worker reproduction, aggression and gene expression. We found that worker ovary activation was inhibited only in the presence of egg-laying queens, regardless of their mating status. Workers reared in the presence of newly-mated queens showed intermediate vitellogenin expression levels relative to workers reared with mated egg-laying and virgin queens. However, none of the whole-body chemical extracts of any of the queen treatment groups affected ovary activation, aggressive behavior, or gene expression in workers. Our findings indicate that only the presence of a freely-behaving, egg-laying queen can fully inhibit worker reproduction. It remains to be determined if workers detect differences in queen mating status and fecundity through differences in the queens' behavior alone or through the queen's behavior in concert with fertility signals.

Guidelines for biosafety laboratory competency: CDC and the Association of Public Health Laboratories.

PubMed

Delany, Judy R; Pentella, Michael A; Rodriguez, Joyce A; Shah, Kajari V; Baxley, Karen P; Holmes, David E

2011-04-15

These guidelines for biosafety laboratory competency outline the essential skills, knowledge, and abilities required for working with biologic agents at the three highest biosafety levels (BSLs) (levels 2, 3, and 4). The competencies are tiered to a worker's experience at three levels: entry level, midlevel (experienced), and senior level (supervisory or managerial positions). These guidelines were developed on behalf of CDC and the Association of Public Health Laboratories (APHL) by an expert panel comprising 27 experts representing state and federal public health laboratories, private sector clinical and research laboratories, and academic centers. They were then reviewed by approximately 300 practitioners representing the relevant fields. The guidelines are intended for laboratorians working with hazardous biologic agents, obtained from either samples or specimens that are maintained and manipulated in clinical, environmental, public health, academic, and research laboratories.

Biosafety perspective of clinical laboratory workers: a profile of Pakistan.

PubMed

Nasim, Sadia; Shahid, Anjum; Mustufa, Muhammad Ayaz; Arain, Ghazala Mohyuddin; Ali, Ghazanfer; Taseer, Ijaz-ul-Haque; Talreja, Kanaya Lal; Firdous, Rukhsana; Iqbal, Rizwan; Siddique, Shameem Ahmed; Naz, Saima; Akhter, Tasleem

2012-08-21

Biosafety during lab work is an important concern in developing countries. Some critical issues concerning biosafety are lack of training, exceeding workload, working too fast, deciding not to follow safe practices, and skepticism about biohazards. This study aimed to determine biosafety perception and practices of laboratory technicians during routine work in clinical laboratories of Pakistan. A total of 1,782 laboratory technicians were interviewed from major public sector hospitals and a few private hospital laboratories throughout Pakistan. A total of 1,647 (92.4%) males and 135 (7.6%) females participated in the study, with over half (59.7%) having more than five years of work experience. Results showed that 28.4% of the laboratory technicians from Punjab, 35.7% from Sindh, 32% from Balochistan and 38.4% from Khyber Pakhtoon Khawa (KPK) did not use any personal protective equipment. Almost 46% of the respondents (34.2% from Punjab, 61.9% from Sindh, 25.2% from Balochistan and 85% from KPK) said they reused syringes either occasionally or regularly. Furthermore, 30.7% of the respondents said they discard used syringes directly into municipal dustbins. The majority (66.7%) claimed there are no separate bins for sharps, so they throw these in municipal dustbins. Mouth pipetting was reported by 28.3% technicians. Standard operating procedures were not available in 67.2% labs, and accident records were not maintained in 83.4%. No formal biosafety training had been provided to 84.2% of the respondents. Laboratory technicians in Pakistan lack awareness of good laboratory practices and biosafety measures, and also face a lack of resources.

A preliminary survey of Vietnamese nail salon workers in Alameda County, California.

PubMed

Quach, Thu; Nguyen, Kim-Dung; Doan-Billings, Phuong-An; Okahara, Linda; Fan, Cathyn; Reynolds, Peggy

2008-10-01

In recent decades, the nail salon industry has been one of the fastest growing in the U.S. California has over 300,000 workers licensed to perform nail care services. Though little is known about their health, these workers routinely handle cosmetic products containing carcinogens and endocrine disruptors that may increase a woman's breast cancer risk. Additionally, an estimated 59-80% of California nail salons are run by Vietnamese women who face socio-cultural barriers that may compromise their workplace safety and health care access. In a pilot project designed to characterize Vietnamese nail salon workers in Alameda County, California in order to inform future health interventions and reduce occupational exposures, we conducted face-to-face surveys with a convenience sample of 201 Vietnamese nail salon workers at 74 salons. Of the workers surveyed, a majority reported that they are concerned about their health from exposure to workplace chemicals. Additionally, a sizeable proportion reported having experienced some health problem after they began working in the industry, particularly acute health problems that may be associated with solvent exposure (e.g. skin and eye irritation, breathing difficulties and headaches). Our findings highlight a critical need for further investigation into the breast cancer risk of nail salon workers, underscored by the workers' routine use of carcinogenic and endocrine-disrupting chemicals, their prevalent health concerns about such chemicals, and their high level of acute health problems. Moreover, the predominance of Vietnamese immigrant women in this workforce makes it an important target group for further research and health interventions.

Follicle-stimulating hormone levels in female workers exposed to urban pollutants.

PubMed

Ciarrocca, Manuela; Caciari, Tiziana; Ponticiello, Barnaba Giuseppina; Gioffrè, Pier Agostino; Tomei, Gianfranco; Sancini, Angela; Schifano, Maria Pia; Palermo, Paola; Nardone, Nadia; Scimitto, Lara; Fiaschetti, Maria; Tomei, Francesco

2011-12-01

The aim of this study was to evaluate if there were alterations in FSH plasma levels in female outdoor workers (traffic policewomen and drivers) exposed to chemical urban stressors vs. control group. After excluding subjects with main confounding factors, traffic policewomen, drivers and indoor workers were matched by age, working life, socioeconomic status, marital status, menstrual cycle day, age of menarche, habitual consumption of Italian coffee and soy. A total of 129 female subjects were included in the study: some 63 workers studied during proliferative phase and 66 during secretory phase of menstrual cycle. Proliferative phase of menstrual cycle: FSH mean values were significantly higher in traffic policewomen compared to controls (p < 0.05). Results suggest that in outdoor workers exposed to urban chemical stressors there are alterations in FSH levels; therefore FSH may be used as an early biological marker, valuable for the group, used in occupational set.

Laboratory analogues simulating Titan's atmospheric aerosols: Compared chemical compositions of grains and thin films

NASA Astrophysics Data System (ADS)

Carrasco, Nathalie; Jomard, François; Vigneron, Jackie; Etcheberry, Arnaud; Cernogora, Guy

2016-09-01

Two sorts of solid organic samples can be produced in laboratory experiments simulating Titan's atmospheric reactivity: grains in the volume and thin films on the reactor walls. We expect that grains are more representative of Titan's atmospheric aerosols, but films are used to provide optical indices for radiative models of Titan's atmosphere. The aim of the present study is to address if these two sorts of analogues are chemically equivalent or not, when produced in the same N2-CH4 plasma discharge. The chemical compositions of both these materials are measured by using elemental analysis, XPS analysis and Secondary Ion Mass Spectrometry. The main parameter probed is the CH4/N2 ratio to explore various possible chemical regimes. We find that films are homogeneous but significantly less rich in nitrogen and hydrogen than grains produced in the same experimental conditions. This surprising difference in their chemical compositions could be explained by the efficient etching occurring on the films, which stay in the discharge during the whole plasma duration, whereas the grains are ejected after a few minutes. The higher nitrogen content in the grains possibly involves a higher optical absorption than the one measured on the films, with a possible impact on Titan's radiative models.

Intra-/inter-laboratory validation study on reactive oxygen species assay for chemical photosafety evaluation using two different solar simulators.

PubMed

Onoue, Satomi; Hosoi, Kazuhiro; Toda, Tsuguto; Takagi, Hironori; Osaki, Naoto; Matsumoto, Yasuhiro; Kawakami, Satoru; Wakuri, Shinobu; Iwase, Yumiko; Yamamoto, Toshinobu; Nakamura, Kazuichi; Ohno, Yasuo; Kojima, Hajime

2014-06-01

A previous multi-center validation study demonstrated high transferability and reliability of reactive oxygen species (ROS) assay for photosafety evaluation. The present validation study was undertaken to verify further the applicability of different solar simulators and assay performance. In 7 participating laboratories, 2 standards and 42 coded chemicals, including 23 phototoxins and 19 non-phototoxic drugs/chemicals, were assessed by the ROS assay using two different solar simulators (Atlas Suntest CPS series, 3 labs; and Seric SXL-2500V2, 4 labs). Irradiation conditions could be optimized using quinine and sulisobenzone as positive and negative standards to offer consistent assay outcomes. In both solar simulators, the intra- and inter-day precisions (coefficient of variation; CV) for quinine were found to be below 10%. The inter-laboratory CV for quinine averaged 15.4% (Atlas Suntest CPS) and 13.2% (Seric SXL-2500V2) for singlet oxygen and 17.0% (Atlas Suntest CPS) and 7.1% (Seric SXL-2500V2) for superoxide, suggesting high inter-laboratory reproducibility even though different solar simulators were employed for the ROS assay. In the ROS assay on 42 coded chemicals, some chemicals (ca. 19-29%) were unevaluable because of limited solubility and spectral interference. Although several false positives appeared with positive predictivity of ca. 76-92% (Atlas Suntest CPS) and ca. 75-84% (Seric SXL-2500V2), there were no false negative predictions in both solar simulators. A multi-center validation study on the ROS assay demonstrated satisfactory transferability, accuracy, precision, and predictivity, as well as the availability of other solar simulators. Copyright © 2013 Elsevier Ltd. All rights reserved.

Army medical laboratory telemedicine: role of mass spectrometry in telediagnosis for chemical and biological defense.

PubMed

Smith, J R; Shih, M L; Price, E O; Platoff, G E; Schlager, J J

2001-12-01

An army medical field laboratory presently has the capability of performing standard protocols developed at the US Army Medical Research Institute of Chemical Defense for verification of nerve agent or sulfur mustard exposure. The protocols analyze hydrolysis products of chemical warfare agents using gas chromatography/mass spectrometry. Additionally, chemical warfare agents can produce alkylated or phosphorylated proteins following human exposure that have long biological half-lives and can be used as diagnostic biomarkers of chemical agent exposure. An analytical technique known as matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF/MS) currently is being examined for its potential to analyze these biomarkers. The technique is capable of detecting large biomolecules and modifications made to them. Its fast analysis time makes MALDI-TOF/MS technology suitable for screening casualties from chemical or biological attacks. Basic operation requires minimal training and the instrument has the potential to become field-portable. The limitation of the technique is that the generated data may require considerable expertise from knowledgeable personnel for consultation to ensure correct interpretation. The interaction between research scientists and field personnel in the acquisition of data and its interpretation via advanced digital telecommunication technologies can enhance rapid diagnosis and subsequently improve patient care in remote areas. Copyright 2001 John Wiley & Sons, Ltd.

The Effect of Chemistry Laboratory Activities on Students' Chemistry Perception and Laboratory Anxiety Levels

ERIC Educational Resources Information Center

Aydogdu, Cemil

2017-01-01

Chemistry lesson should be supported with experiments to understand the lecture effectively. For safety laboratory environment and to prevent laboratory accidents; chemical substances' properties, working principles for chemical substances' usage should be learnt. Aim of the present study was to analyze the effect of experiments which depend on…

Laboratory Safety is Everyone's Responsibility.

ERIC Educational Resources Information Center

Brubaker, Inara M.; And Others

1981-01-01

Outlines a survey of laboratory practices and policies for employee protection from exposure to chemicals. Findings support the argument that academic, industrial, and other research laboratories are different from the manufacturing environment and should have a different toxic chemical policy and standards. (Author/SK)

Blood lead levels in radiator repair workers in Colorado.

PubMed

Dalton, C B; McCammon, J B; Hoffman, R E; Baron, R C

1997-01-01

A laboratory-based blood lead surveillance system in Colorado identified radiator repair workers as having the highest blood lead levels of all worker groups reported. A survey of 42 radiator repair shops in ten locales throughout Colorado was undertaken to estimate the prevalence of workers with elevated blood lead levels > 25 micrograms/dL. The survey was designed to test the sensitivity of the surveillance system and to assess working conditions and practices in the radiator repair industry in Colorado. Of 63 workers, 39 (62%) had blood lead levels > 25 micrograms/dL. The sensitivity of the surveillance system for detecting radiator repair workers with elevated blood lead levels was estimated at 11%. None of the radiator repair shops had adequate local exhaust ventilation. Work practice and engineering modifications are needed to reduce lead exposure in this industry.

Workplace exposures and protective practices of Hispanic warehouse workers.

PubMed

Livaudais, Jennifer C; Thompson, Beti; Islas, Ilda; Ibarra, Genoveva; Anderson, Jennifer; Coronado, Gloria D

2009-04-01

This study was undertaken to assess workplace hazards and protective practices among Hispanic men and women working post-harvest in asparagus, apple and pear packaging warehouses. Three focus groups were conducted in July 2003 with 25 workers (20 women, 5 men) recruited from communities in the Yakima Valley, Washington. Focus group content informed the design of an in-person structured interview administered to 50 additional warehouse workers from August to November 2006. Focus group participants reported difficult working conditions, exposure to chemicals, adverse health effects and use of work and home protective practices to minimize exposures for themselves and their families. Structured interview participants reported few workplace exposures to chemicals although many reported engaging in workplace and home protective practices. Findings from this research can direct initial efforts to determine if and how interventions for warehouse workers may be designed to protect against hazardous workplace exposures.

[AT THE CROSSROADS: THE ROLE OF LABORATORY MEDICINE IN THE PATIENT CARE PROCESS].

PubMed

Geffen, Yuval; Zaidise, Itzhak

2017-06-01

In recent decades, the laboratory medicine profession has undergone significant changes due to both technological developments and economic constraints. Technological innovations support automation, provide faster and more accurate equipment, and allow increased efficiency through the use of commercial test kits. These changes, combined with budgetary constraints, have led to mergers and centralization of medical laboratories to optimize work and cut costs. While this centralization may be a business necessity, it leads to a disconnection between the laboratory and the clinical context. In addition, laboratory tests are treated as a commodity, which places emphasis on price only, rather than quality. In this article, we review the developments and changes that medical laboratories and the laboratory medicine profession have undergone in recent decades. We focus on technological and structural challenges affecting the functioning of medical laboratories and the relations between laboratory workers and medical teams. We then introduce vocational education changes required for the laboratory medicine profession. We propose defining the role of medical laboratory directors in terms of their basic training as medical doctors or doctors of science. We suggest that laboratory employees should become a reliable source of information regarding selection of appropriate test methods, processing data and presenting the results to the medical staff. Laboratory workers must deepen their clinical knowledge and become an integral part of the patient care process, along with medical and nursing staff. Special training programs for medical laboratory workers and directors must be developed in order to match the complex activities currently being conducted in laboratories.

Immune functions of the garment workers.

PubMed

Sultana, R; Ferdous, K J; Hossain, M; Zahid, M S H; Islam, L N

2012-10-01

Occupational exposure to cotton dust, fibers, metal fumes and different chemicals used in the aparrel manufacturing industries cause a wide range of physical and psychological health problems in the garment workers that may also affect their immune function. To assess the immune system function in garment workers. A total of 45 workers of a garment factory, and 41 control subjects, not exposed to the garment working environment were enrolled in this study. In the study subjects, the complement system function was assessed as bactericidal activity on Escherichia coli DH5α cells using the standard plate count method. Serum complement components C3 and C4 were measured by immunoprecipitation, and IgG was measured by immunonephelometry. The bactericidal activity of serum complement in the garment workers (range: 93.5%-99.9%) was significantly (p<0.01) lower than that in the controls (range: 98.6%-100%). The heat-inactivated serum of the workers showed a significantly enhanced bactericidal activity. In the garment workers, the mean levels of complement C3, and C4 were 1.75 and 0.26 g/L, respectively that were close to those of the controls. The mean IgG level in the garment workers was 13.5 g/L that was significantly (p<0.001) higher than that in the controls. Working in a garment factory may affect the immune system.

Comet assay in reconstructed 3D human epidermal skin models--investigation of intra- and inter-laboratory reproducibility with coded chemicals.

PubMed

Reus, Astrid A; Reisinger, Kerstin; Downs, Thomas R; Carr, Gregory J; Zeller, Andreas; Corvi, Raffaella; Krul, Cyrille A M; Pfuhler, Stefan

2013-11-01

Reconstructed 3D human epidermal skin models are being used increasingly for safety testing of chemicals. Based on EpiDerm™ tissues, an assay was developed in which the tissues were topically exposed to test chemicals for 3h followed by cell isolation and assessment of DNA damage using the comet assay. Inter-laboratory reproducibility of the 3D skin comet assay was initially demonstrated using two model genotoxic carcinogens, methyl methane sulfonate (MMS) and 4-nitroquinoline-n-oxide, and the results showed good concordance among three different laboratories and with in vivo data. In Phase 2 of the project, intra- and inter-laboratory reproducibility was investigated with five coded compounds with different genotoxicity liability tested at three different laboratories. For the genotoxic carcinogens MMS and N-ethyl-N-nitrosourea, all laboratories reported a dose-related and statistically significant increase (P < 0.05) in DNA damage in every experiment. For the genotoxic carcinogen, 2,4-diaminotoluene, the overall result from all laboratories showed a smaller, but significant genotoxic response (P < 0.05). For cyclohexanone (CHN) (non-genotoxic in vitro and in vivo, and non-carcinogenic), an increase compared to the solvent control acetone was observed only in one laboratory. However, the response was not dose related and CHN was judged negative overall, as was p-nitrophenol (p-NP) (genotoxic in vitro but not in vivo and non-carcinogenic), which was the only compound showing clear cytotoxic effects. For p-NP, significant DNA damage generally occurred only at doses that were substantially cytotoxic (>30% cell loss), and the overall response was comparable in all laboratories despite some differences in doses tested. The results of the collaborative study for the coded compounds were generally reproducible among the laboratories involved and intra-laboratory reproducibility was also good. These data indicate that the comet assay in EpiDerm™ skin models is a

Comet assay in reconstructed 3D human epidermal skin models—investigation of intra- and inter-laboratory reproducibility with coded chemicals

PubMed Central

Pfuhler, Stefan

2013-01-01

Reconstructed 3D human epidermal skin models are being used increasingly for safety testing of chemicals. Based on EpiDerm™ tissues, an assay was developed in which the tissues were topically exposed to test chemicals for 3h followed by cell isolation and assessment of DNA damage using the comet assay. Inter-laboratory reproducibility of the 3D skin comet assay was initially demonstrated using two model genotoxic carcinogens, methyl methane sulfonate (MMS) and 4-nitroquinoline-n-oxide, and the results showed good concordance among three different laboratories and with in vivo data. In Phase 2 of the project, intra- and inter-laboratory reproducibility was investigated with five coded compounds with different genotoxicity liability tested at three different laboratories. For the genotoxic carcinogens MMS and N-ethyl-N-nitrosourea, all laboratories reported a dose-related and statistically significant increase (P < 0.05) in DNA damage in every experiment. For the genotoxic carcinogen, 2,4-diaminotoluene, the overall result from all laboratories showed a smaller, but significant genotoxic response (P < 0.05). For cyclohexanone (CHN) (non-genotoxic in vitro and in vivo, and non-carcinogenic), an increase compared to the solvent control acetone was observed only in one laboratory. However, the response was not dose related and CHN was judged negative overall, as was p-nitrophenol (p-NP) (genotoxic in vitro but not in vivo and non-carcinogenic), which was the only compound showing clear cytotoxic effects. For p-NP, significant DNA damage generally occurred only at doses that were substantially cytotoxic (>30% cell loss), and the overall response was comparable in all laboratories despite some differences in doses tested. The results of the collaborative study for the coded compounds were generally reproducible among the laboratories involved and intra-laboratory reproducibility was also good. These data indicate that the comet assay in EpiDerm™ skin models is a

[Medical certification in workers involved in logging and wood-processing].

PubMed

Romankow, Jacek

2007-01-01

Activities involved in forestry and woodworking industry are associated with workers being exposed to numerous environmental and technology-related factors that are detrimental to their health. Such hazards include working in changeable climatic conditions, in the vicinity of heavy equipment, exposure to noise, chainsaw vibrations, enforced body positioning, hard physical work, the effect of exhaust gases, potential effects of biological factors, including epizootic diseases. Wood processing involves performing mechanical activities employing tools and machines, as well as processes utilizing various chemical substances. Forestry and woodworking industry workers may deal both with timber and with wood products. In medical certification, the following issues are of significance: work in the vicinity of rotational elements, noise, effects of chemicals or biological factors, including carcinogenic substances. For this reason, the procedures involved in medical examinations of such workers are complex.

Bringing the ocean into the laboratory to probe the chemical complexity of sea spray aerosol

PubMed Central

Prather, Kimberly A.; Bertram, Timothy H.; Grassian, Vicki H.; Deane, Grant B.; Stokes, M. Dale; DeMott, Paul J.; Aluwihare, Lihini I.; Palenik, Brian P.; Azam, Farooq; Seinfeld, John H.; Moffet, Ryan C.; Molina, Mario J.; Cappa, Christopher D.; Geiger, Franz M.; Roberts, Gregory C.; Russell, Lynn M.; Ault, Andrew P.; Baltrusaitis, Jonas; Collins, Douglas B.; Corrigan, Craig E.; Cuadra-Rodriguez, Luis A.; Ebben, Carlena J.; Forestieri, Sara D.; Guasco, Timothy L.; Hersey, Scott P.; Kim, Michelle J.; Lambert, William F.; Modini, Robin L.; Mui, Wilton; Pedler, Byron E.; Ruppel, Matthew J.; Ryder, Olivia S.; Schoepp, Nathan G.; Sullivan, Ryan C.; Zhao, Defeng

2013-01-01

The production, size, and chemical composition of sea spray aerosol (SSA) particles strongly depend on seawater chemistry, which is controlled by physical, chemical, and biological processes. Despite decades of studies in marine environments, a direct relationship has yet to be established between ocean biology and the physicochemical properties of SSA. The ability to establish such relationships is hindered by the fact that SSA measurements are typically dominated by overwhelming background aerosol concentrations even in remote marine environments. Herein, we describe a newly developed approach for reproducing the chemical complexity of SSA in a laboratory setting, comprising a unique ocean-atmosphere facility equipped with actual breaking waves. A mesocosm experiment was performed in natural seawater, using controlled phytoplankton and heterotrophic bacteria concentrations, which showed SSA size and chemical mixing state are acutely sensitive to the aerosol production mechanism, as well as to the type of biological species present. The largest reduction in the hygroscopicity of SSA occurred as heterotrophic bacteria concentrations increased, whereas phytoplankton and chlorophyll-a concentrations decreased, directly corresponding to a change in mixing state in the smallest (60–180 nm) size range. Using this newly developed approach to generate realistic SSA, systematic studies can now be performed to advance our fundamental understanding of the impact of ocean biology on SSA chemical mixing state, heterogeneous reactivity, and the resulting climate-relevant properties. PMID:23620519

Respiratory symptoms and peak expiratory flow rates in workers of a Nigerian soap and detergent industry.

PubMed

Bamidele, J O

2002-01-01

This comparative cross-sectional study was carried out to assess the respiratory symptoms and peak expiratory flow rates of the factory(study group) and office(control group) workers in a soap and detergent industry in Ilorin in relation to the occupational hazards of chemical fumes and detergent dust in the industry. Upper respiratory tract infections were found in 67.5% and 10.6% of the study group and control group respectively. The study shows that the factory workers experienced hazards (e.g. chemical fumes and detergent dust) at work more than the office workers. Personal protective devices such as boots, face masks, gloves, earmuffs and goggles were not consistently used since they were inadequate in supply, worn out and of substandard qualities. The general reduction in the mean values of peak expiratory flow rate in the factory workers than in the office workers as observed in this study may possibly, be a pointer to the effect of industrial exposure to chemical fumes and detergent dust over the years. There is the need to follow up these workers in order to detect early any possible disease and complications that may arise.

Transferability and within- and between-laboratory reproducibilities of EpiSensA for predicting skin sensitization potential in vitro: A ring study in three laboratories.

PubMed

Mizumachi, Hideyuki; Sakuma, Megumi; Ikezumi, Mayu; Saito, Kazutoshi; Takeyoshi, Midori; Imai, Noriyasu; Okutomi, Hiroko; Umetsu, Asami; Motohashi, Hiroko; Watanabe, Mika; Miyazawa, Masaaki

2018-05-03

The epidermal sensitization assay (EpiSensA) is an in vitro skin sensitization test method based on gene expression of four markers related to the induction of skin sensitization; the assay uses commercially available reconstructed human epidermis. EpiSensA has exhibited an accuracy of 90% for 72 chemicals, including lipophilic chemicals and pre-/pro-haptens, when compared with the results of the murine local lymph node assay. In this work, a ring study was performed by one lead and two naive laboratories to evaluate the transferability, as well as within- and between-laboratory reproducibilities, of EpiSensA. Three non-coded chemicals (two lipophilic sensitizers and one non-sensitizer) were tested for the assessment of transferability and 10 coded chemicals (seven sensitizers and three non-sensitizers, including four lipophilic chemicals) were tested for the assessment of reproducibility. In the transferability phase, the non-coded chemicals (two sensitizers and one non-sensitizer) were correctly classified at the two naive laboratories, indicating that the EpiSensA protocol was transferred successfully. For the within-laboratory reproducibility, the data generated with three coded chemicals tested in three independent experiments in each laboratory gave consistent predictions within laboratories. For the between-laboratory reproducibility, 9 of the 10 coded chemicals tested once in each laboratory provided consistent predictions among the three laboratories. These results suggested that EpiSensA has good transferability, as well as within- and between-laboratory reproducibility. Copyright © 2018 John Wiley & Sons, Ltd.

Biosafety principles and practices for the veterinary diagnostic laboratory.

PubMed

Kozlovac, Joseph; Schmitt, Beverly

2015-01-01

Good biosafety and biocontainment programs and practices are critical components of the successful operation of any veterinary diagnostic laboratory. In this chapter we provide information and guidance on critical biosafety management program elements, facility requirements, protective equipment, and procedures necessary to ensure that the laboratory worker and the environment are adequately protected in the challenging work environment of the veterinary diagnostic laboratory in general and provide specific guidance for those laboratories employing molecular diagnostic techniques.

Occupational lead toxicity in battery workers

PubMed Central

Basit, Shahla; Karim, Nasim; Munshi, Alia Bano

2015-01-01

Objective: To estimate blood lead level (BLL) and to assess the features of lead toxicity among lead acid battery (LAB) industrial workers. Methods: This prospective study was carried out in the medical centre of PCSIR Laboratories, Karachi from March 2012 – March 2013. Fifty LAB industry workers, males and females between 17-65 years were included in the study. They were divided into group 1 with 40 workers- directly related and group 2 with 10 workers –indirectly related, (administration staff members) to LAB manufacture. Detailed history, complete physical examination and BLL estimation by flameless atomic absorption spectrophotometer was done. Results: Total 34 patients in group 1 and 3 patients in group 2 had elevated BLL. Comparison of group 1 and 2 revealed anemia (40v/s4), bone pain (38v/s7), abdominal pain (38 v/s 2), nausea (32v/s6), head ache & irritability (24v/s6), weakness & lethargy (21v/s6), tremors (13v/s0) insomnia (5v/s4), lead line (4v/s 0) and blood pressure above 140/90 mm of Hg (12v/s0) respectively. Conclusion: High blood lead level and features attributable to lead toxicity were prevalent among LAB industry workers of Karachi. PMID:26430401

[Hygienic evaluation of health risk for female workers of stock-raising enterprise].

PubMed

Iusupova, N Z; Shamsiiarov, N N; Dautov, F F

2012-01-01

The article presents results of study concerning work conditions of female workers engaged into stock-raising enterprises of Tatarstan Republic. Findings are that major occupational hazards in the female workers are unfavorable microclimate, chemical hazards contaminating ambient air of workplace and high noise level.

Biothreat agents and pathology laboratories.

PubMed

Nelson, Ann; Wilson, Michael L

2007-11-01

Pathologists and laboratory staff are likely to be among the first health care workers to be aware that a potential bioterrorism attack has occurred. To prepare for such an event, it is necessary to be familiar with 1) the characteristics of bioterrorism attacks versus natural disease outbreaks, 2) which pathogens are potential bioterrorism agents; 3) the types of lesions that each causes; 4) the microbiological characteristics of each agent; 5) the Laboratory Response Network and reporting requirements, and 6) what resources are available.

77 FR 4368 - ArcelorMittal, Including Workers Whose Unemployment Insurance (UI) Wages Are Reported Through...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

...- Site Leased Workers From Adecco, ESW, Inc., Guardsmark, Hudson Global Resources, Multi Serv, and Quaker... include on-site leased workers from Multi Serv and Quaker Chemical. The notices were published in the... some workers separated from employment at the Hennepin, Illinois location of ArcelorMittal had their...

Factors Contributing to the Self-Reported Prevalence of Multiple Chemical Sensitivity in Public Facility Workers and the General Population of Korea.

PubMed

Heo, Yong; Kim, Sang-Hoon; Lee, Seok-Ki; Kim, Hyoung-Ah

Multiple chemical sensitivity (MCS), an acquired disorder with multiple recurrent symptoms, has been studied for its association with diverse environmental factors. The present study investigated the factors associated with the self-reported prevalence of MCS in public facility workers and the general population in Korea. The Quick Environmental Exposure Sensitivity Inventory (QEESI) questionnaire was obtained from public facility workers (N=530) and the general population (N=500) to determine the prevalence of MCS and the degree of its risk. Information about demographic characteristics, subjective perceptions of sick building syndrome or sick house syndrome or allergy (SBS/SHS/Allergy), and certain home- or workplace-related events were also obtained. There was not a statistical difference between the public facility workers and the general population in the QEESI scores. The overall prevalence of MCS was 14.4% and there was no statistical difference between the two groups. Regarding the overall degree of risk of MCS, 21.8% of the study subjects were categorized as "very suggestive", and there was no significant difference between the two groups. Gender and the subjective perception of SBS/SHS/Allergy significantly affected the prevalence of MCS and the MCS risk criteria. Considering the absence of diagnostic criteria and/or treatment methods for MCS in Korea, these results can be utilized in establishing future strategies to manage MCS.

Safety in the Chemical Laboratory: Laboratory Air Quality: Part I. A Concentration Model.

ERIC Educational Resources Information Center

Butcher, Samuel S.; And Others

1985-01-01

Offers a simple model for estimating vapor concentrations in instructional laboratories. Three methods are described for measuring ventilation rates, and the results of measurements in six laboratories are presented. The model should provide a simple screening tool for evaluating worst-case personal exposures. (JN)

Reduced Tolerance to Night Shift in Chronic Shift Workers: Insight From Fractal Regulation.

PubMed

Li, Peng; Morris, Christopher J; Patxot, Melissa; Yugay, Tatiana; Mistretta, Joseph; Purvis, Taylor E; Scheer, Frank A J L; Hu, Kun

2017-07-01

Healthy physiology is characterized by fractal regulation (FR) that generates similar structures in the fluctuations of physiological outputs at different time scales. Perturbed FR is associated with aging and age-related pathological conditions. Shift work, involving repeated and chronic exposure to misaligned environmental and behavioral cycles, disrupts circadian coordination. We tested whether night shifts perturb FR in motor activity and whether night shifts affect FR in chronic shift workers and non-shift workers differently. We studied 13 chronic shift workers and 14 non-shift workers as controls using both field and in-laboratory experiments. In the in-laboratory study, simulated night shifts were used to induce a misalignment between the endogenous circadian pacemaker and the sleep-wake cycles (ie, circadian misalignment) while environmental conditions and food intake were controlled. In the field study, we found that FR was robust in controls but broke down in shift workers during night shifts, leading to more random activity fluctuations as observed in patients with dementia. The night shift effect was present even 2 days after ending night shifts. The in-laboratory study confirmed that night shifts perturbed FR in chronic shift workers and showed that FR in controls was more resilience to the circadian misalignment. Moreover, FR during real and simulated night shifts was more perturbed in those who started shift work at older ages. Chronic shift work causes night shift intolerance, which is probably linked to the degraded plasticity of the circadian control system. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

[Safety in the Microbiology laboratory].

PubMed

Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

2015-01-01

The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Risk Perception and Occupational Accidents: A Study of Gas Station Workers in Southern Brazil

PubMed Central

Cezar-Vaz, Marta Regina; Rocha, Laurelize Pereira; Bonow, Clarice Alves; da Silva, Mara Regina Santos; Vaz, Joana Cezar; Cardoso, Letícia Silveira

2012-01-01

The present study aimed to identify the perceptions of gas station workers about physical, chemical, biological and physiological risk factors to which they are exposed in their work environment; identify types of occupational accidents involving gas station workers and; report the development of a socioenvironmental intervention as a tool for risk communication to gas station workers. A quantitative study was performed with 221 gas station workers in southern Brazil between October and December 2010. Data collection was performed between October to December 2010 via structured interviews. The data were analyzed using SPSS 19.0. The participants identified the following risk types: chemical (93.7%), physical (88.2%), physiological (64.3%) and biological (62.4%). In this sample, 94.1% of gas station workers reported occupational accidents, and 74.2% reported fuel contact with the eyes (p < 0.05). It is concluded that workers perceive risks, and that they tend to relate risks with the occurrence of occupational accidents as an indicator of the dangerous nature of their work environment. PMID:22851948

Detection of benzo[a]pyrene diol epoxide-DNA adducts in peripheral blood lymphocytes and antibodies to the adducts in serum from coke oven workers.

PubMed Central

Harris, C C; Vahakangas, K; Newman, M J; Trivers, G E; Shamsuddin, A; Sinopoli, N; Mann, D L; Wright, W E

1985-01-01

Coke oven workers are exposed to high levels of carcinogenic polycyclic aromatic hydrocarbons, including benzo[a]pyrene (B[a]P), and are at increased risk of lung cancer. Since B[a]P is enzymatically activated to 7 beta,8 alpha-dihydroxy(9 alpha, 10 alpha)epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]PDE) that forms adducts with DNA, the presence of these adducts was measured in DNA from peripheral blood lymphocytes by synchronous fluorescence spectrophotometry and enzyme radioimmunoassay. Approximately two-thirds of the workers had detectable levels of B[a]PDE-DNA adducts. Antibodies to the DNA adducts were also found in the serum of 27% of the workers. B[a]PDE-DNA adducts were not detectable in lymphocytes and antibodies to the adducts were not detected in sera from a control group of nonsmoking laboratory workers. DNA adducts and/or antibodies to the adducts indicate exposure to B[a]P and its metabolic activation to the carcinogenic metabolite that covalently binds to and damages DNA. Detection of adducts and antibodies to them may also be useful as internal dosimeters of the pathobiological effective doses of chemical carcinogens. PMID:2413443

An infrared free-electron laser for the Chemical Dynamics Research Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, D.

1992-04-01

This document describes a free-electron laser (FEL) proposed as part of the Chemical Dynamics Research Laboratory (CDRL), a user facility that also incorporates several advanced lasers of conventional design and two beamlines for the ALS. The FEL itself addresses the needs of the chemical sciences community for a high-brightness, tunable source covering a broad region of the infrared spectrum -- from 3 to 50 {mu}m. All of these sources, together with a variety of sophisticated experimental stations, will be housed in a new building to be located adjacent to the ALS. The radiation sources can be synchronized to permit powerfulmore » two-color, pump-probe experiments that will further our fundamental understanding of chemical dynamics at the molecular level, especially those aspects relevant to practical issues in combustion chemistry. The technical approach adopted in this design makes use of superconducting radiofrequency (SCRF) accelerating structures. The primary motivation for adopting this approach was to meet the user requirement for wavelength stability equal to one part in 10{sup 4}. Previous studies concluded that a wavelength stability of only one part in 10{sup 3} could be achieved with currently available room-temperature technology. In addition, the superconducting design operates in a continuous-wave (cw) mode and hence offers considerably higher average optical output power. It also allows for various pulse-gating configurations that will permit simultaneous multiuser operations. A summary of the comparative performance attainable with room-temperature and superconducting designs is given. The FEL described in this report provides a continuous train of 30-ps micropulses, with 100{mu}J of optical energy per micropulse, at a repetition rate of 6.1 MHz. The device can also deliver pulses at a cw repetition rate of 12.2 MHz, with a peak power of 50 {mu}J per micropulse. 70 ref.« less

Safety in the Chemical Laboratory

ERIC Educational Resources Information Center

Steere, Norman V.

1969-01-01

Presents the Safety Guide used in the Research Center at Monsanto Chemical Company (St. Louis). Topics include: general safety practices, safety glasses and shoes, respiratory protection, electrical wiring, solvent handling and waste disposal. Procedures are given for evacuating, "tagging out, and "locking out. Special mention is given to…

Investigation of discharged aerosol nanoparticles during chemical precipitation and spray pyrolysis for developing safety measures in the nano research laboratory.

PubMed

Kolesnikov, Еvgeny; Karunakaran, Gopalu; Godymchuk, Anna; Vera, Levina; Yudin, Andrey Grigorjevich; Gusev, Alexander; Kuznetsov, Denis

2017-05-01

Nowadays, the demands for the nanoparticles are increasing due to their tremendous applications in various fields. As a consequence, the discharge of nanoparticles into the atmosphere and environment is also increasing, posing a health threat and environmental damage in terms of pollution. Thus, an extensive research is essential to evaluate the discharge of these nanoparticles into the environment. Keeping this in mind, the present investigation aimed to analyze the discharge of aerosol nanoparticles that are synthesized in the laboratory via chemical precipitation and spray pyrolysis methods. The results indicated that the chemical precipitation method discharges a higher concentration of nanoparticles in the work site when compared to the spray pyrolysis method. The aerosol concentration also varied with the different steps involved during the synthesis of nanoparticles. The average particle's concentration in air for chemical precipitation and spray pyrolysis methods was around 1,037,476 and 883,421particles/cm 3 . In addition, the average total discharge of nanoparticles in the entire laboratory was also examined. A significant variation in the concentration of nanoparticles was noticed, during the processing of materials and the concentration of particles (14-723nm) exceeding the daily allowed concentration to about 70-170 times was observed over a period of 6 months. Thus, the results of the present study will be very useful in developing safety measures and would help in organizing the rules for people working in nanotechnology laboratories to minimize the hazardous effects. Copyright © 2017 Elsevier Inc. All rights reserved.

Safety and immunogenicity of a four-component meningococcal group B vaccine (4CMenB) and a quadrivalent meningococcal group ACWY conjugate vaccine administered concomitantly in healthy laboratory workers.

PubMed

Findlow, Jamie; Bai, Xilian; Findlow, Helen; Newton, Emma; Kaczmarski, Ed; Miller, Elizabeth; Borrow, Ray

2015-06-26

Safety precautions for laboratory staff working with meningococci should primarily rely on laboratory procedures preventing exposure to aerosols containing viable meningococci. Despite this, vaccination is a key component of protection in the occupational setting. In the UK in 2009, there were no licensed vaccines for meningococcal capsular group B or conjugate vaccines for capsular groups A, C, W and Y. We therefore undertook a Phase II trial in laboratory workers to investigate the safety and immunogenicity of a four component group B vaccine (4CMenB) and a quadrivalent group A, C, W and Y conjugate vaccine (ACWY-CRM). Enrolment was open to staff aged 18-65 years at the Public Health Laboratory, Manchester who may have had a potential occupational exposure risk to meningococci. 4CMenB was administered at 0, 2 and 6 months in the non-dominant arm and ACWY-CRM concomitantly at 0 months in the dominant arm. Pre- and post-vaccination blood samples were taken and analysed by the serum bactericidal antibody (SBA) assay against A, C, W and Y strains and a panel of seven diverse group B strains. Diary cards were used to record any local and systemic reactions following each vaccination. In total, 38 staff were enrolled and received initial vaccinations with 31 completing the trial per protocol. Both vaccines were proven safe, with local reactogenicity being more commonly reported following 4CMenB than ACWY-CRM. High proportions of subjects had putative protective SBA titres pre-vaccination, with 61-84 and 61-87% protected against A, C, W and Y strains and diverse MenB strains, respectively. Post-vaccination, SBA titres increased with 95-100 and 90-100% of subjects with protective SBA titres against A, C, W and Y strains and diverse MenB strains, respectively. These data suggest that 4CMenB and ACWY-CRM are safe when administered concomitantly and have the potential to enhance protection for laboratory workers. www.clinicaltrials.gov identifier: NCT00962624. Crown

Barriers to Implementation of Optimal Laboratory Biosafety Practices in Pakistan

PubMed Central

Shafaq, Humaira; Hasan, Rumina; Qureshi, Shahida M.; Dojki, Maqboola; Hughes, Molly A.; Zaidi, Anita K. M.; Khan, Erum

2016-01-01

The primary goal of biosafety education is to ensure safe practices among workers in biomedical laboratories. Despite several educational workshops by the Pakistan Biological Safety Association (PBSA), compliance with safe practices among laboratory workers remains low. To determine barriers to implementation of recommended biosafety practices among biomedical laboratory workers in Pakistan, we conducted a questionnaire-based survey of participants attending 2 workshops focusing on biosafety practices in Karachi and Lahore in February 2015. Questionnaires were developed by modifying the BARRIERS scale in which respondents are required to rate barriers on a 1-4 scale. Nineteen of the original 29 barriers were included and subcategorized into 4 groups: awareness, material quality, presentation, and workplace barriers. Workshops were attended by 64 participants. Among barriers that were rated as moderate to great barriers by at least 50% of respondents were: lack of time to read biosafety guidelines (workplace subscale), lack of staff authorization to change/improve practice (workplace subscale), no career or self-improvement advantages to the staff for implementing optimal practices (workplace subscale), and unclear practice implications (presentation subscale). A lack of recognition for employees' rights and benefits in the workplace was found to be a predominant reason for a lack of compliance. Based on perceived barriers, substantial improvement in work environment, worker facilitation, and enabling are needed for achieving improved or optimal biosafety practices in Pakistan. PMID:27400192

Large Heat Shield for Mars Science Laboratory

NASA Image and Video Library

2009-07-10

This image shows NASA Mars Science Laboratory heat shield, and a spacecraft worker at Lockheed Martin Space Systems, Denver. It is the largest heat shield ever built for descending through the atmosphere of any planet.

Laboratory-acquired vaccinia virus infection in a recently immunized person--Massachusetts, 2013.

PubMed

Hsu, Christopher H; Farland, Julien; Winters, Thomas; Gunn, Julia; Caron, Donna; Evans, Jennifer; Osadebe, Lynda; Bethune, Leon; McCollum, Andrea M; Patel, Nishi; Wilkins, Kimberly; Davidson, Whitni; Petersen, Brett; Barry, M Anita

2015-05-01

On November 26, 2013, the CDC poxvirus laboratory was notified by the Boston Public Health Commission (BPHC) of an inadvertent inoculation of a recently vaccinated (ACAM2000 smallpox vaccine) laboratory worker with wild type vaccinia virus (VACV) Western Reserve. A joint investigation by CDC and BPHC confirmed orthopoxvirus infection in the worker, who had reported a needle stick in his thumb while inoculating a mouse with VACV. He experienced a non-tender, red rash on his arm, diagnosed at a local emergency department as cellulitis. He subsequently developed a necrotic lesion on his thumb, diagnosed as VACV infection. Three weeks after the injury, the thumb lesion was surgically debrided and at 2 months post-injury, the skin lesion had resolved. The investigation confirmed that the infection was the first reported VACV infection in the United States in a laboratory worker vaccinated according to the Advisory Committee on Immunization Practices (ACIP) recommendations. The incident prompted the academic institution to outline biosafety measures for working with biologic agents, such as biosafety training of laboratory personnel, vaccination (if appropriate), and steps in incident reporting. Though vaccination has been shown to be an effective measure in protecting personnel in the laboratory setting, this case report underscores the importance of proper safety measures and incident reporting.

42 CFR 493.1405 - Standard; Laboratory director qualifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... degree in a chemical, physical, biological, or clinical laboratory science from an accredited institution... Chemistry, the American Board of Bioanalysis, or the American Board of Medical Laboratory Immunology; or (ii...) Have earned a master's degree in a chemical, physical, biological or clinical laboratory science or...

42 CFR 493.1405 - Standard; Laboratory director qualifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... degree in a chemical, physical, biological, or clinical laboratory science from an accredited institution... Chemistry, the American Board of Bioanalysis, or the American Board of Medical Laboratory Immunology; or (ii...) Have earned a master's degree in a chemical, physical, biological or clinical laboratory science or...

Chemical Accident Prevention Publications

EPA Pesticide Factsheets

These include chemical safety alerts, emergency preparedness and prevention advisories, and topical backgrounders. Excess flow valves, protecting workers in ethylene oxide sterilization facilities, reactivity hazards, and delayed coker units are covered.

How mentors affect workers' interests and involvement at work

NASA Technical Reports Server (NTRS)

Fero, H. C.; Nakamura, J.

2002-01-01

Survey data about experience with mentors were collected from 95 workers at NASA's Jet Propulsion Laboratory. The findings raise questions about reliance on formal mentorships unconnected to proteges' daily work experience and discouragement of supervisor-mentor relationships.

Biosafety and biosecurity in veterinary laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finley, Melissa R.; Astuto-Gribble, Lisa M.; Brass, Van Hildren

Here, with recent outbreaks of MERS-Cov, Anthrax, Nipah, and Highly Pathogenic Avian Influenza, much emphasis has been placed on rapid identification of infectious agents globally. As a result, laboratories are building capacity, conducting more advanced and sophisticated research, increasing laboratory staff, and establishing collections of dangerous pathogens in an attempt to reduce the impact of infectious disease outbreaks and characterize disease causing agents. With this expansion, the global laboratory community has started to focus on laboratory biosafety and biosecurity to prevent the accidental and/or intent ional release o f these agents. Laboratory biosafety and biosecurity systems are used around themore » world to help mit igate the risks posed by dangerous pathogens in the laboratory. Veterinary laboratories carry unique responsibilities to workers and communities to safely and securely handle disease causing microorganisms. Many microorganisms studied in veterinary laboratories not only infect animals, but also have the potential to infect humans. This paper will discuss the fundamentals of laboratory biosafety and biosecurity.« less

Coronary artery atherosclerosis associated with shift work in chemical plant workers by using coronary CT angiography.

PubMed

Kang, WonYang; Park, Won-Ju; Jang, Keun-Ho; Kim, Soo-Hyeon; Gwon, Do-Hyeong; Lim, Hyeong-Min; Ahn, Ji-Sung; Moon, Jai-Dong

2016-08-01

The aim of this study was to investigate whether shift work is related to elevated risk of coronary artery disease (CAD) by determining the coronary artery calcium (CAC) score and the presence of coronary artery stenosis by using coronary artery CT angiography (CCTA). In this study, 110 male workers participated and underwent a CCTA examination for CAC scoring, which represents coronary artery plaque, and were evaluated for luminal stenosis. All of the participants were working in the same chemical plant, of whom 70 worked day shifts and 40 worked rotating shifts. In a multivariate logistic regression analysis, including age, smoking status, alcohol consumption, regular exercise and waist circumference, shift work was associated with a 2.89-fold increase in the odds of developing coronary plaque compared with day work (OR, 2.89; 95% CI 1.07 to 7.82). The association between shift work and coronary plaque was strong after adjustment for age, low-density lipoprotein cholesterol, hypertension and diabetes mellitus (OR, 2.92; 95% CI 1.02 to 8.33). In addition, the number of years of shift work employment was associated with coronary plaque. However, no association was found between shift work and coronary artery stenosis. Shift work could induce CAD onset via the atherosclerotic process, and shift work employment duration was associated with an increased risk of atherosclerosis in male workers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

2003 Sandia National Laboratories--Albuquerque Annual Illness and Injury Surveillance Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

2007-05-23

Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

22. CONSTRUCTION PROGRESS PHOTO SHOWING WORKERS LOWERING CALCINER VESSEL INTO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. CONSTRUCTION PROGRESS PHOTO SHOWING WORKERS LOWERING CALCINER VESSEL INTO CELL THROUGH THE HATCH. INEEL PHOTO NUMBER NRTS-60-2485. - Idaho National Engineering Laboratory, Old Waste Calcining Facility, Scoville, Butte County, ID

Carcinogen Control in the Chemical Laboratory.

ERIC Educational Resources Information Center

Johnson, James S.

1981-01-01

Presents general and specific guidelines for handling carcinogens. Additional topics include: definition of potential occupational carcinogens; classification of carcinogens; inventory requirements; signs and labels for materials and laboratories; decontamination and disposal procedures; medical surveillance for employees working with controlled…

Lead contamination of paint remediation workers' vehicles.

PubMed

Boraiko, Carol; Wright, Eva M; Ralston, Faye

2013-03-01

Exposure to lead has been shown to be harmful to adults; it is a teratogen, it can damage the peripheral nervous system, and it adversely affects the reproductive system. Professional lead-based paint remediation workers are at risk of exposure to lead dust. The authors' study was conducted to determine if these remediation workers transfer lead from their work site to their vehicles and then potentially expose their families. It was hypothesized that remediation workers transported the lead from the remediation work site to the floorboards of their vehicles due to not following required protective equipment use. The laboratory's level of quantitation for lead on the wipe samples, 10 microg/ft2, was used to indicate lead contamination. This level was exceeded in 50% of the floorboards sampled. These results confirm that many vehicle floorboards used by remediation workers are contaminated with lead dust, potentially resulting in transfer of lead dust. The ultimate detrimental outcome could be the transfer of lead particles to other family members, causing the poisoning of a child or other at-risk person.

Modern Chemical Technology, Guidebook for Chemical Technicians.

ERIC Educational Resources Information Center

Pecsok, Robert L.; Chapman, Kenneth

This volume is a part of the ACS "Modern Chemical Technology" (ChemTeC) curriculum that is developed for chemical technicians. It is intended as a handbook that will be used throughout the instruction. Safety is stressed in eight of the ten chapters under the headings: safety in the chemical laboratory, personal protective equipment, fire safety…

Students' Satisfaction toward the Services of the Chemical Laboratory

ERIC Educational Resources Information Center

Lukum, Astin; Paramata, Yoseph

2015-01-01

Chemistry Laboratory serves all of the students that were programmed chemistry laboratory works. The satisfaction of the students was studied that involving 50 students. The study was conducted to measure the students' satisfaction towards the services offered by the laboratory. Measurement of the students' satisfaction was conducted using…

Prudent Practices for Handling Hazardous Chemicals in Laboratories.

ERIC Educational Resources Information Center

National Academy of Sciences-National Research Council, Washington, DC. Assembly of Mathematical and Physical Sciences.

This guide recommends procedures for safe handling and disposal of hazardous substances, along with broad recommendations for developing comprehensive laboratory safety programs. Although specific information is provided, general principles which can be adapted to activities in any laboratory are emphasized. Section 1 focuses on procedures for…

Laboratory Waste Management. A Guidebook.

ERIC Educational Resources Information Center

American Chemical Society, Washington, DC.

A primary goal of the American Chemical Society Task Force on Laboratory Waste Management is to provide laboratories with the information necessary to develop effective strategies and training programs for managing laboratory wastes. This book is intended to present a fresh look at waste management from the laboratory perspective, considering both…

Queen pheromones: The chemical crown governing insect social life.

PubMed

Holman, Luke

2010-11-01

Group-living species produce signals that alter the behavior and even the physiology of their social partners. Social insects possess especially sophisticated chemical communication systems that govern every aspect of colony life, including the defining feature of eusociality: reproductive division of labor. Current evidence hints at the central importance of queen pheromones, but progress has been hindered by the fact that such pheromones have only been isolated in honeybees. In a pair of papers on the ant Lasius niger, we identified and investigated a queen pheromone regulating worker sterility. The cuticular hydrocarbon 3-methylhentriacontane (3-MeC(31)) is correlated with queen maturity and fecundity and workers are also more likely to execute surplus queens that have low amounts of this chemical. Experiments with synthetic 3-MeC(31) found that it inhibits ovarian development in queenless workers and lowers worker aggression towards objects coated with it. Production of 3-MeC(31) by queens was depressed by an experimental immune challenge, and the same chemical was abundant on queenlaid eggs, suggesting that the workers' responses to the queen are conditional on her health and fecundity. Together with other studies, these results indicate that queen pheromones are honest signals of quality that simultaneously regulate multiple social behaviors.

School Chemistry Laboratory Safety Guide

ERIC Educational Resources Information Center

Brundage, Patricia; Palassis, John

2006-01-01

The guide presents information about ordering, using, storing, and maintaining chemicals in the high school laboratory. The guide also provides information about chemical waste, safety and emergency equipment, assessing chemical hazards, common safety symbols and signs, and fundamental resources relating to chemical safety, such as Material…

Engineering Design and Automation in the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wantuck, P. J.; Hollen, R. M.

2002-01-01

This paper provides an overview of some design and automation-related projects ongoing within the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory. AET uses a diverse set of technical capabilities to develop and apply processes and technologies to applications for a variety of customers both internal and external to the Laboratory. The Advanced Recovery and Integrated Extraction System (ARIES) represents a new paradigm for the processing of nuclear material from retired weapon systems in an environment that seeks to minimize the radiation dose to workers. To achieve this goal, ARIES relies upon automation-based features to handle and processmore » the nuclear material. Our Chemical Process Development Team specializes in fuzzy logic and intelligent control systems. Neural network technology has been utilized in some advanced control systems developed by team members. Genetic algorithms and neural networks have often been applied for data analysis. Enterprise modeling, or discrete event simulation, as well as chemical process simulation has been employed for chemical process plant design. Fuel cell research and development has historically been an active effort within the AET organization. Under the principal sponsorship of the Department of Energy, the Fuel Cell Team is now focusing on technologies required to produce fuel cell compatible feed gas from reformation of a variety of conventional fuels (e.g., gasoline, natural gas), principally for automotive applications. This effort involves chemical reactor design and analysis, process modeling, catalyst analysis, as well as full scale system characterization and testing. The group's Automation and Robotics team has at its foundation many years of experience delivering automated and robotic systems for nuclear, analytical chemistry, and bioengineering applications. As an integrator of commercial systems and a developer of unique custom-made systems, the team currently supports the

NETL - Thermogravimetric Analysis Laboratory

ScienceCinema

Richards, George

2018-06-22

Researchers in NETL's Thermal Analysis Laboratory are investigating chemical looping combustion. As a clean and efficient fossil fuel technology, chemical looping combustion controls CO2 emissions and offers a promising alternative to traditional combustion.

A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

PubMed

Tuntiseranee, P; Chongsuvivatwong, V

1998-12-01

A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

WORKER STACKS GRAPHITE BLOCKS AGAINST INNER SOUTH WALL OF REACTOR. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WORKER STACKS GRAPHITE BLOCKS AGAINST INNER SOUTH WALL OF REACTOR. INL NEGATIVE NO. 3925. Unknown Photographer, 12/14/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Facts & Figures for the Chemical Industry at a Glance--3. Employment in the Chemical Industry: Chemical Employment Growth Continues.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1989

1989-01-01

Notes that the number of workers employed in the U.S. chemical industry rose again in 1988. Provides information for the years 1978-88 for the areas of industrial employment, scientist and engineer employment, corporation employment, wages, and industrial productivity. (MVL)

Analyzing the Function of Cartilage Replacements: A Laboratory Activity to Teach High School Students Chemical and Tissue Engineering Concepts

ERIC Educational Resources Information Center

Renner, Julie N.; Emady, Heather N.; Galas, Richards J., Jr.; Zhange, Rong; Baertsch, Chelsey D.; Liu, Julie C.

2013-01-01

A cartilage tissue engineering laboratory activity was developed as part of the Exciting Discoveries for Girls in Engineering (EDGE) Summer Camp sponsored by the Women In Engineering Program (WIEP) at Purdue University. Our goal was to increase awareness of chemical engineering and tissue engineering in female high school students through a…

Statistical Analysis of the Worker Engagement Survey Administered at the Worker Safety and Security Team Festival

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Adam Christopher

The Worker Safety and Security Team (WSST) at Los Alamos National Laboratory holds an annual festival, WSST-fest, to engage workers and inform them about safety- and securityrelated matters. As part of the 2015 WSST-fest, workers were given the opportunity to participate in a survey assessing their engagement in their organizations and work environments. A total of 789 workers participated in the 23-question survey where they were also invited, optionally, to identify themselves, their organization, and to give open-ended feedback. The survey consisted of 23 positive statements (i.e. “My organization is a good place to work.”) with which the respondent couldmore » express a level of agreement. The text of these statements are provided in Table 1. The level of agreement corresponds to a 5-level Likert scale ranging from “Strongly Disagree” to “Strongly Agree.” In addition to assessing the overall positivity or negativity of the scores, the results were partitioned into several cohorts based on the response meta-data (self-identification, comments, etc.) to explore trends. Survey respondents were presented with the options to identify themselves, their organizations and to provide comments. These options suggested the following questions about the data set.« less

[Chromosome aberration frequency in workers in tire and industrial ruber manufacture].

PubMed

Aleksandrov, S E

1982-01-01

A cytogenetic study was carried out with the view to analyse blood and embryonic tissue cultures taken from female workers of various shops of tyre and rubber industry. In workers of preparation shops the level of chromosome aberrations in blood was equal to 2.63%, while in embryonic tissues the value was 6.33%. The number of aberrations on blood and embryonic tissue exhibited by workers of chemical shops was equal to 1.34 and 2.79%, respectively. No specific differences were observed in the sub-group of women having been in frequent contacts with gasoline or curing gases, as compared with the group on the whole. Curing accelerators which are ingredients of toxic dust in preparation shops of tyre and rubber industry cause a sharp increase in the number of chromosome aberrations both in blood and in the embryonic tissues of women. Data on induced abortions may be used for evaluation of the influence of chemicals on the developing fetus and can serve as a test models of mutagenic and embryotoxic effect. They also may be regarded as a part of the general system of the evaluation of mutagenic effects of chemicals in humans.

75 FR 30065 - Arcelor Mittal, Including On-Site Leased Workers From Adecco, ESW, Inc., Guardsmark, Hudson...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... On-Site Leased Workers From Adecco, ESW, Inc., Guardsmark, Hudson Global Resources, Multi Serv and... leased workers from Multi Serv. The notice was published in the Federal Register on May 12, 2010 (75 FR... reports that workers leased from Quaker Chemical were employed on-site at the Hennepin, Illinois location...

Guidelines for the selection of chemical protective clothing. 1991 Update: Performance, availability, and sources of chemical protective clothing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J.S.; Schwope, A.D.; Goydan, R.

1991-12-31

The selection, acquisition, and use of chemical protective clothing (CPC) at Department of Energy (DOE) facilities require up-to-date data and information on the performance, availability, and sources of such clothing. There are hundreds of types and more than one hundred principal manufacturers of CPC. Information on CPC is published in manufacturers` brochures and the technical literature. These information sources, however, have no standard format or terminology for describing products or the results of product testing. Furthermore, the literature and information is continually changing and growing. Consequently, DOE`s industrial hygienists and safety specialists are frequently confounded in their efforts to providemore » effective CPC to workers, by they in the field, the laboratory, or the plant. In recognition of the many advances and changes that have occurred and of the need to provide current information to its health and safety staff, the DOE has updated and modified the key appendices of the Guidelines/Chemical Protective Clothing. The updates appendices compose the majority of this update document, wherein they are called Sections. Each Section begins with a description of its format, content, abbreviations, units, and links with other Sections, as appropriate.« less

Bumblebee size polymorphism and worker response to queen pheromone.

PubMed

Holman, Luke

2014-01-01

Queen pheromones are chemical signals produced by reproductive individuals in social insect colonies. In many species they are key to the maintenance of reproductive division of labor, with workers beginning to reproduce individually once the queen pheromone disappears. Recently, a queen pheromone that negatively affects worker fecundity was discovered in the bumblebee Bombus terrestris, presenting an exciting opportunity for comparisons with analogous queen pheromones in independently-evolved eusocial lineages such as honey bees, ants, wasps and termites. I set out to replicate this discovery and verify its reproducibility. Using blind, controlled experiments, I found that n-pentacosane (C25) does indeed negatively affect worker ovary development. Moreover, the pheromone affects both large and small workers, and applies to workers from large, mature colonies as well as young colonies. Given that C25 is readily available and that bumblebees are popular study organisms, I hope that this replication will encourage other researchers to tackle the many research questions enabled by the discovery of a queen pheromone.

Shock wave facilities at Pulter Laboratory of SRI international

NASA Astrophysics Data System (ADS)

Murri, W. J.

1982-04-01

Shock wave research in the Poulter Laboratory covers two broad areas: dynamic material response and dynamic structural response. Workers in both areas use common facilities. The Laboratory has several guns and the facilities to perform various types of high explosive loading experiments. The use of these facilities and experimental techniques is illustrated with examples from research projects.

Metabolic syndrome: a common problem among office workers.

PubMed

Alavi, S S; Makarem, J; Mehrdad, R; Abbasi, M

2015-01-01

Metabolic syndrome (MSx) is associated with several health problems. Workers are an important part of any organization. To determine the prevalence of MSx and related variables among office workers. This cross-sectional study evaluated 1488 office workers in Qom province, Central Iran, by using a multi-stage cluster sampling. Diagnosis of MSx was based on blood HDL-cholesterol, triglyceride, and fasting blood sugar (FBS) levels and waist circumference, and blood pressure. The overall prevalence of MSx was 35.9% (95% CI 33.5% to 38.3%), higher in men (37.2%) than in women (20.6%), and increased with age. The most common laboratory findings of MSx were hypertriglyceridemia (45.9%) and low HDL-cholesterol level (45.5%). Office workers with MSx had a significantly (p<0.001) higher body mass index than those without MSx. Lack of regular leisure time physical activity (p=0.003), and low intake of fruits (p=0.02) were associated with MSx. The prevalence of MSx was very high among office workers. Workplace health improvement programs through identifying and preventing MSx are necessary for improvement of staff's health.

Safety in the Chemical Laboratory: Chemical Wastes in Academic Labs.

ERIC Educational Resources Information Center

Walton, Wendy A.

1987-01-01

Encourages instruction about disposal of hazardous wastes in college chemistry laboratories as an integral part of experiments done by students. Discusses methods such as down-the-drain disposal, lab-pack disposal, precipitation and disposal, and precipitation and recovery. Suggests that faculty and students take more responsibility for waste…

Worker reproduction of the invasive yellow crazy ant Anoplolepis gracilipes.

PubMed

Lee, Ching-Chen; Nakao, Hirotaka; Tseng, Shu-Ping; Hsu, Hung-Wei; Lin, Gwo-Li; Tay, Jia-Wei; Billen, Johan; Ito, Fuminori; Lee, Chow-Yang; Lin, Chung-Chi; Yang, Chin-Cheng Scotty

2017-01-01

Reproductive division of labor is one of the key features of social insects. Queens are adapted for reproduction while workers are adapted for foraging and colony maintenance. In many species, however, workers retain functional ovaries and can lay unfertilized male eggs or trophic eggs. Here we report for the first time on the occurrence of physogastric workers and apparent worker reproduction in the invasive yellow crazy ant Anoplolepis gracilipes (Fr. Smith). We further examined the reproductive potential and nutritional role of physogastric workers through multidisciplinary approaches including morphological characterization, laboratory manipulation, genetic analysis and behavioral observation. Egg production with two types of eggs, namely reproductive and trophic eggs, by physogastric workers was found. The reproductive egg was confirmed to be haploid and male-destined, suggesting that the workers produced males via arrhenotokous parthenogenesis as no spermatheca was discovered. Detailed observations suggested that larvae were mainly fed with trophic eggs. Along with consumption of trophic eggs by queens and other castes as part of their diet, the vital role of physogastric workers as "trophic specialist" is confirmed. We propose that adaptive advantages derived from worker reproduction for A. gracilipes may include 1) trophic eggs provisioned by physogastric workers likely assist colonies of A. gracilipes in overcoming unfavorable conditions such as paucity of food during critical founding stage; 2) worker-produced males are fertile and thus might offer an inclusive fitness advantage for the doomed orphaned colony.

A collaborative approach to lean laboratory workstation design reduces wasted technologist travel.

PubMed

Yerian, Lisa M; Seestadt, Joseph A; Gomez, Erron R; Marchant, Kandice K

2012-08-01

Lean methodologies have been applied in many industries to reduce waste. We applied Lean techniques to redesign laboratory workstations with the aim of reducing the number of times employees must leave their workstations to complete their tasks. At baseline in 68 workflows (aggregates or sequence of process steps) studied, 251 (38%) of 664 tasks required workers to walk away from their workstations. After analysis and redesign, only 59 (9%) of the 664 tasks required technologists to leave their workstations to complete these tasks. On average, 3.4 travel events were removed for each workstation. Time studies in a single laboratory section demonstrated that workers spend 8 to 70 seconds in travel each time they step away from the workstation. The redesigned workstations will allow employees to spend less time travelling around the laboratory. Additional benefits include employee training in waste identification, improved overall laboratory layout, and identification of other process improvement opportunities in our laboratory.

Polar organic chemical integrative sampler (POCIS) uptake rates for 17 polar pesticides and degradation products: laboratory calibration.

PubMed

Ibrahim, Imtiaz; Togola, Anne; Gonzalez, Catherine

2013-06-01

Polar organic chemical integrative samplers (POCIS) are useful for monitoring a wide range of chemicals, including polar pesticides, in water bodies. However, few calibration data are available, which limits the use of these samplers for time-weighted average concentration measurements in an aquatic medium. This work deals with the laboratory calibration of the pharmaceutical configuration of a polar organic chemical integrative sampler (pharm-POCIS) for calculating the sampling rates of 17 polar pesticides (1.15 ≤  logK(ow) ≤ 3.71) commonly found in water. The experiment, conducted for 21 days in a continuous water flow-through exposure system, showed an integrative accumulation of all studied pesticides for 15 days. Three compounds (metalaxyl, azoxystrobine, and terbuthylazine) remained integrative for the 21-day experiment. The sampling rates measured ranged from 67.9 to 279 mL day(-1) and increased with the hydrophobicity of the pesticides until reaching a plateau where no significant variation in sampling rate is observed when increasing the hydrophobicity.

Artificial intelligence within the chemical laboratory.

PubMed

Winkel, P

1994-01-01

Various techniques within the area of artificial intelligence such as expert systems and neural networks may play a role during the problem-solving processes within the clinical biochemical laboratory. Neural network analysis provides a non-algorithmic approach to information processing, which results in the ability of the computer to form associations and to recognize patterns or classes among data. It belongs to the machine learning techniques which also include probabilistic techniques such as discriminant function analysis and logistic regression and information theoretical techniques. These techniques may be used to extract knowledge from example patients to optimize decision limits and identify clinically important laboratory quantities. An expert system may be defined as a computer program that can give advice in a well-defined area of expertise and is able to explain its reasoning. Declarative knowledge consists of statements about logical or empirical relationships between things. Expert systems typically separate declarative knowledge residing in a knowledge base from the inference engine: an algorithm that dynamically directs and controls the system when it searches its knowledge base. A tool is an expert system without a knowledge base. The developer of an expert system uses a tool by entering knowledge into the system. Many, if not the majority of problems encountered at the laboratory level are procedural. A problem is procedural if it is possible to write up a step-by-step description of the expert's work or if it can be represented by a decision tree. To solve problems of this type only small expert system tools and/or conventional programming are required.(ABSTRACT TRUNCATED AT 250 WORDS)

Synthesizing Novel Anthraquinone Natural Product-Like Compounds to Investigate Protein-Ligand Interactions in Both an in Vitro and in Vivo Assay: An Integrated Research-Based Third-Year Chemical Biology Laboratory Course

ERIC Educational Resources Information Center

McKenzie, Nancy; McNulty, James; McLeod, David; McFadden, Meghan; Balachandran, Naresh

2012-01-01

A new undergraduate program in chemical biology was launched in 2008 to provide a unique learning experience for those students interested in this interdisciplinary science. An innovative undergraduate chemical biology laboratory course at the third-year level was developed as a key component of the curriculum. The laboratory course introduces…

Chemical and Physical Exposures in the Emerging US Green Collar Workforce

PubMed Central

Chen, Charles J.; Moore, Kevin J.; Fernandez, Cristina A.; Arheart, Kristopher L.; LeBlanc, William G.; Cifuentes, Manuel; McClure, Laura A.; Christ, Sharon L.; Fleming, Lora E.; Lee, David J.; Caban-Martinez, Alberto J.

2017-01-01

Objective “Green collar” workers serve in occupations that directly improve environmental quality and sustainability. This study estimates and compares the prevalence of select physical and chemical exposures among green versus non-green U.S. workers. Methods Data from the U.S. 2010 National Health Interview Survey(NHIS) Occupational Health Supplement were linked to the Occupational Information Network(O*NET) Database. We examined four main exposures:1)vapors, gas, dust, fumes(VGDF);2)secondhand tobacco smoke;3)skin hazards;4)outdoor work. Results Green collar workers were significantly more likely to report exposure to VGDF and outdoor work than non-green collar workers(Adjusted Odds Ratio[AOR]=1.25; 95% CI=1.11–1.40; AOR=1.44(1.26–1.63), respectively). Green collar workers were less likely to be exposed to chemicals(AOR=0.80; 0.69–0.92). Conclusions Green collar workers appear to be at greater risk for select workplace exposures. As the green industry continues to grow, it is important to identify these occupational hazards in order to maximize worker health. PMID:28490043

[Epidemiological study of cytopenia among benzene-exposed workers and its influential factors].

PubMed

Peng, Juan-juan; Liu, Mei-xia; Yang, Feng; Guo, Wei-wei; Zhuang, Ran; Jia, Xian-dong

2013-03-01

To evaluate the benzene exposure level and cytopenia among the benzene exposed workers in Shanghai, China and to analyze the influential factors for the health of benzene-exposed workers. A total of 3314 benzene-exposed workers, who were from 85 benzene-related enterprises selected by stratified random sampling based on enterprise sizes and industries, were included in the study. The time-weighted average (TWA) concentration of benzene in each workshop was measured by individual sampling and fixed point sampling, and the benzene exposure level in workshop was evaluated accordingly. The occupational health examination results and health status of benzene-exposed workers were collected. The median of TW A concentrations of benzene was 0.3 mg/m3. The TWA concentrations measured at 7 ( 1.4%) of the 504 sampling points were above the safety limit. Of the 7 points, 3 were from large enterprises, 2 from medium enterprises, and 2 from small enterprises; 3 were from shipbuilding industry, 1 from chemical industry, and 3 from light industry. Of the 3314 benzene-exposed workers, 451 ( 13.6%) had cytopenia, including 339 males ( 339/2548, 13.3%) and 112 females ( 112/766, 14.6% ). There were significant differences in the incidence rates of leukopenia and neutropenia among the benzene-exposed workers of different sexes and ages (P<0.05); there were significant differences in the incidence rate of cytopenia among the benzene-exposed workers of different ages and working years ( P<0.05 ); there were significant differences in the incidence of neutropenia among the benzene exposed workers of different working years ( P<0.05). Monitoring and intervention measures should be enhanced to protect the benzene-exposed workers in the large enterprises in shipbuilding industry and medium and private enterprises in chemical industry from occupational hazards.

Inter-laboratory variation in the chemical analysis of acidic forest soil reference samples from eastern North America

USGS Publications Warehouse

Ross, Donald S.; Bailiey, Scott W; Briggs, Russell D; Curry, Johanna; Fernandez, Ivan J.; Fredriksen, Guinevere; Goodale, Christine L.; Hazlett, Paul W.; Heine, Paul R; Johnson, Chris E.; Larson, John T; Lawrence, Gregory B.; Kolka, Randy K; Ouimet, Rock; Pare, D; Richter, Daniel D.; Shirmer, Charles D; Warby, Richard A.F.

2015-01-01

Long-term forest soil monitoring and research often requires a comparison of laboratory data generated at different times and in different laboratories. Quantifying the uncertainty associated with these analyses is necessary to assess temporal changes in soil properties. Forest soil chemical properties, and methods to measure these properties, often differ from agronomic and horticultural soils. Soil proficiency programs do not generally include forest soil samples that are highly acidic, high in extractable Al, low in extractable Ca and often high in carbon. To determine the uncertainty associated with specific analytical methods for forest soils, we collected and distributed samples from two soil horizons (Oa and Bs) to 15 laboratories in the eastern United States and Canada. Soil properties measured included total organic carbon and nitrogen, pH and exchangeable cations. Overall, results were consistent despite some differences in methodology. We calculated the median absolute deviation (MAD) for each measurement and considered the acceptable range to be the median 6 2.5 3 MAD. Variability among laboratories was usually as low as the typical variability within a laboratory. A few areas of concern include a lack of consistency in the measurement and expression of results on a dry weight basis, relatively high variability in the C/N ratio in the Bs horizon, challenges associated with determining exchangeable cations at concentrations near the lower reporting range of some laboratories and the operationally defined nature of aluminum extractability. Recommendations include a continuation of reference forest soil exchange programs to quantify the uncertainty associated with these analyses in conjunction with ongoing efforts to review and standardize laboratory methods.

A clinical and radiographic study of coir workers.

PubMed

Uragoda, C G

1975-02-01

Processing of coir, which is the fibre obtained from the husk of the coconut, is a dusty procedure; 779 workers in two coir processing factories in Sri Lanka were examined clincally and radiographically for evidence of respiratory disease. Respiratory symptoms were present in 20 (2-6%) of them, which is no higher than in the general population. Respiratory disease such as asthma, chronic bronchitis, byssinosis, and pulmonary tuberculosis which may occur from occupational exposures were considered, but there was no evidence to suggest a definite association between these conditions and coir dust. Twenty-two workers had abnormal chest radiographs, but when compared with a control group of 591 workers from an engineering firm where lesions were found in 20 cases, there was no significant difference. In the opinion of the medical officer, management and workers of the large factory investigated, coir dust does not produce any respiratory disability. The chemical composition of coir dust is similar to that of sisal which is also relatively inert.

A clinical and radiographic study of coir workers.

PubMed Central

Uragoda, C G

1975-01-01

Processing of coir, which is the fibre obtained from the husk of the coconut, is a dusty procedure; 779 workers in two coir processing factories in Sri Lanka were examined clincally and radiographically for evidence of respiratory disease. Respiratory symptoms were present in 20 (2-6%) of them, which is no higher than in the general population. Respiratory disease such as asthma, chronic bronchitis, byssinosis, and pulmonary tuberculosis which may occur from occupational exposures were considered, but there was no evidence to suggest a definite association between these conditions and coir dust. Twenty-two workers had abnormal chest radiographs, but when compared with a control group of 591 workers from an engineering firm where lesions were found in 20 cases, there was no significant difference. In the opinion of the medical officer, management and workers of the large factory investigated, coir dust does not produce any respiratory disability. The chemical composition of coir dust is similar to that of sisal which is also relatively inert. PMID:1125129

Notch signalling mediates reproductive constraint in the adult worker honeybee

PubMed Central

Duncan, Elizabeth J.; Hyink, Otto; Dearden, Peter K.

2016-01-01

The hallmark of eusociality is the reproductive division of labour, in which one female caste reproduces, while reproduction is constrained in the subordinate caste. In adult worker honeybees (Apis mellifera) reproductive constraint is conditional: in the absence of the queen and brood, adult worker honeybees activate their ovaries and lay haploid male eggs. Here, we demonstrate that chemical inhibition of Notch signalling can overcome the repressive effect of queen pheromone and promote ovary activity in adult worker honeybees. We show that Notch signalling acts on the earliest stages of oogenesis and that the removal of the queen corresponds with a loss of Notch protein in the germarium. We conclude that the ancient and pleiotropic Notch signalling pathway has been co-opted into constraining reproduction in worker honeybees and we provide the first molecular mechanism directly linking ovary activity in adult worker bees with the presence of the queen. PMID:27485026

[Analysis of musculoskeletal disorders, work load and working postures among manufacturing workers].

PubMed

Yu, Shan-fa; Gu, Gui-zhen; Sun, Shi-yi; Wang, Hai-sheng; Cui, Shou-ming; Yang, Xiao-fa; Yang, Shu-le; He, Li-hua; Wang, Sheng

2011-03-01

To analyze the distribution of the musculoskeletal disorders, work load and working postures in different factories, gender, education levels, age and working years among manufacturing workers. In a cross-sectional study of 5134 manufacturing workers in 12 factories, the morbidities for musculoskeletal disorders in one year period were measured with questionnaires. The morbidities for musculoskeletal disorders in body sites: waist, neck, shoulder, wrist, ankle/feet, knee, hip/buttocks and elbows were 59.7%, 47.9%, 38.1%, 33.7%, 26.9%, 25.4%, 15.2%, and 14.9%, respectively in one year period. There were significant differences of morbidities for musculoskeletal symptoms in body sites of workers among different factories (P < 0.05 or P < 0.01). The morbidities of musculoskeletal symptoms in elbows, waist, wrists and ankle/feet of the workers in refractory material and chemical fiber factories were higher than those in other factories, the morbidities for musculoskeletal symptoms of workers in garments and diamond factories were lower than those in other factories. The morbidities for musculoskeletal symptoms in neck, shoulders and wrists of female workers were significantly higher than those of male workers (P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in body sites among workers with different educational levels (P < 0.05 or P < 0.01). There were significant differences of the morbidities for musculoskeletal symptoms in neck, shoulders, wrists, hip/buttocks and knee among groups with different age or different working years (P < 0.01), and the morbidities for musculoskeletal symptoms increased with age and working years. The proportions of unhealthy working postures and high working load among workers in refractory material and chemical fiber factories were higher; but those in garments and diamond factories were lower. The morbidities for musculoskeletal symptoms in waist, neck, shoulder and wrists of workers in

Outbreak of Transient Conversions of the QuantiFERON-TB Gold In-Tube Test in Laboratory Health Care Worker Screenings

PubMed Central

Peracchi, Marta; Zorzi, Diego; Fiorio, Silvia; Fallico, Loredana; Palù, Giorgio

2012-01-01

Gamma interferon release assays were recently introduced in health care worker (HCWs) screenings for tuberculosis surveillance. In longitudinal surveys, conversions and reversions are seen, and yet whether these changes are unspecific or are an expression of new infections and microbial clearance remains unclear. In order to further elucidate these changes, we analyzed an outbreak of 15 transient conversions in 53 HCWs who operate in the same laboratory and handle specimens potentially containing Mycobacterium tuberculosis who underwent screening by the QuantiFERON-TB Gold In-Tube (QFT-GIT) test between 11 May and 30 June 2010: 15/46 (33%) negative HCWs showed a conversion and then reverted after 7 to 107 days. To validate these results, an evaluation of methodological procedures and test reliability, as well as an analysis of results obtained during the same period and processed by the same laboratory, was carried out. For the latter purpose, QFT-GIT results determined for 78 ward HCWs who underwent screening during the same period and were employed in departments with at least 3 infectious tuberculosis patients per year or had cared for an infectious patient without airborne precautions were analyzed with the following results: 6/63 (9%) HCWs with negative results in 3 different departments showed transient conversion (P = 0.002; odds ratio, 4.60; 95% confidence interval, 1.62 to 13.04). A retrospective survey of in-house biosafety practices led to determination of a single exposure factor within the laboratory. These data emphasize the validity of the hypothesis that a transient conversion demonstrates the presence of a real tubercular infection and could be an important indicator for occupational biosafety concerns. They also confirm that subjects with recent conversion should be retested before chest radiography and chemotherapy is offered. PMID:22518010

Safety in the Chemical Laboratory: Laboratory Air Quality: Part II. Measurements of Ventilation Rates.

ERIC Educational Resources Information Center

Butcher, Samuel S.; And Others

1985-01-01

Part I of this paper (SE 538 295) described a simple model for estimating laboratory concentrations of gas phase pollutants. In this part, the measurement of ventilation rates and applications of the model are discussed. The model can provide a useful starting point in planning for safer instructional laboratories. (JN)

Safety in the Chemical Laboratory: Contracts to Dispose of Laboratory Waste.

ERIC Educational Resources Information Center

Fischer, Kenneth E.

1985-01-01

Presents a sample contract for disposing of hazardous wastes in an environmentally sound, timely manner in accordance with all federal, state, and local requirements. Addresses situations where hazardous waste must be disposed of outside the laboratory and where alternate disposal methods are not feasible. (JN)

[Hygienic optimization of the use of chemical protective means on railway transport].

PubMed

Kaptsov, V A; Pankova, V B; Elizarov, B B; Mezentsev, A P; Komleva, E A

2004-01-01

The paper presents data characterizing the working conditions of railway workers. It shows that there is the greatest levels of noise and vibration, the burden and intensity of work. The worst working conditions are noted in energy supply, car, locomotive services and track facilities. The working conditions determine a significant industrial risk of railway workers since the prevention of health abnormalities by using chemical protective means is a topical problem. The priority lines of hygienic rationale for optimization the choice and use of chemical protective means for workers exposed to occupational hazards are determined.

Fire Extinguisher Designated Worker and Fire Watch: Self-Study Course 15672

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Jimmy D.

At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code ofmore » Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.« less

Fire Extinguisher Training for Fire Watch and Designated Workers, Course 9893

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Jimmy D.

At Los Alamos National Laboratory (LANL), all workers must be aware of LANL fire protection policies and be trained on what to do in the event of a fire. This course, Fire Extinguisher Training for Fire Watch and Designated Workers (#9893), provides awareness-level and hands-on training for fire watch personnel and designated workers. Fire watch personnel and designated workers are appointed by line management and must receive both awareness-level training and hands-on training in the use of portable fire extinguishers to extinguish an incipient-stage fire. This training meets the requirements of the Occupational Safety and Health Administration (OSHA) Code ofmore » Federal Regulations (CFR) 29 CFR 1910.157, Portable Fire Extinguishers, and Procedure (P) 101-26, Welding, Cutting, and Other Spark-/Flame-Producing Operations.« less

A Microscale Approach to Chemical Kinetics in the General Chemistry Laboratory: The Potassium Iodide Hydrogen Peroxide Iodine-Clock Reaction

ERIC Educational Resources Information Center

Sattsangi, Prem D.

2011-01-01

A microscale laboratory for teaching chemical kinetics utilizing the iodine clock reaction is described. Plastic pipets, 3 mL volume, are used to store and deliver precise drops of reagents and the reaction is run in a 24 well plastic tray using a total 60 drops of reagents. With this procedure, students determine the rate of reaction and the…

Laboratory and Workplace Assessments of Rivet Bucking Bar Vibration Emissions

PubMed Central

McDowell, Thomas W.; Warren, Christopher; Xu, Xueyan S.; Welcome, Daniel E.; Dong, Ren G.

2016-01-01

Sheet metal workers operating rivet bucking bars are at risk of developing hand and wrist musculoskeletal disorders associated with exposures to hand-transmitted vibrations and forceful exertions required to operate these hand tools. New bucking bar technologies have been introduced in efforts to reduce workplace vibration exposures to these workers. However, the efficacy of these new bucking bar designs has not been well documented. While there are standardized laboratory-based methodologies for assessing the vibration emissions of many types of powered hand tools, no such standard exists for rivet bucking bars. Therefore, this study included the development of a laboratory-based method for assessing bucking bar vibrations which utilizes a simulated riveting task. With this method, this study evaluated three traditional steel bucking bars, three similarly shaped tungsten alloy bars, and three bars featuring spring-dampeners. For comparison the bucking bar vibrations were also assessed during three typical riveting tasks at a large aircraft maintenance facility. The bucking bars were rank-ordered in terms of unweighted and frequency-weighted acceleration measured at the hand-tool interface. The results suggest that the developed laboratory method is a reasonable technique for ranking bucking bar vibration emissions; the lab-based riveting simulations produced similar rankings to the workplace rankings. However, the laboratory-based acceleration averages were considerably lower than the workplace measurements. These observations suggest that the laboratory test results are acceptable for comparing and screening bucking bars, but the laboratory measurements should not be directly used for assessing the risk of workplace bucking bar vibration exposures. The newer bucking bar technologies exhibited significantly reduced vibrations compared to the traditional steel bars. The results of this study, together with other information such as rivet quality, productivity, tool

Geochemistry and stratigraphic correlation of basalt lavas beneath the Idaho Chemical Processing Plant, Idaho National Engineering Laboratory

USGS Publications Warehouse

Reed, M.F.; Bartholomay, R.C.; Hughes, S.S.

1997-01-01

Thirty-nine samples of basaltic core were collected from wells 121 and 123, located approximately 1.8 km apart north and south of the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Samples were collected from depths ranging from 15 to 221 m below land surface for the purpose of establishing stratigraphic correlations between these two wells. Elemental analyses indicate that the basalts consist of three principal chemical types. Two of these types are each represented by a single basalt flow in each well. The third chemical type is represented by many basalt flows and includes a broad range of chemical compositions that is distinguished from the other two types. Basalt flows within the third type were identified by hierarchical K-cluster analysis of 14 representative elements: Fe, Ca, K, Na, Sc, Co, La, Ce, Sm, Eu, Yb, Hf, Ta, and Th. Cluster analyses indicate correlations of basalt flows between wells 121 and 123 at depths of approximately 38-40 m, 125-128 m, 131-137 m, 149-158 m, and 183-198 m. Probable correlations also are indicated for at least seven other depth intervals. Basalt flows in several depth intervals do not correlate on the basis of chemical compositions, thus reflecting possible flow margins in the sequence between the wells. Multi-element chemical data provide a useful method for determining stratigraphic correlations of basalt in the upper 1-2 km of the eastern Snake River Plain.

Laboratory-acquired brucellosis: a Spanish national survey.

PubMed

Bouza, E; Sánchez-Carrillo, C; Hernangómez, S; González, M José

2005-09-01

A retrospective postal survey was carried out among 1240 clinical microbiology laboratory workers in Spain. Overall, 75 (43 microbiologists and 32 technicians) had suffered from laboratory-acquired brucellosis (LAB). Considering the total number of replies (N=628), the rate of LAB was 11.9%. The risk of suffering from LAB was clearly related to the number of isolates of Brucella spp. per year. A major break in biosafety measures was recognized in 60 cases (80%). In nine cases, processing was considered to be secure, and in six cases, the source of infection was unknown. Diagnosis was based on serology in all cases. In 51 cases (68%), blood cultures confirmed diagnosis. A variety of regimens were used to treat the 75 LAB cases. The combination of tetracycline and streptomycin was the most commonly used regimen (in 35 patients), followed by the combination of tetracycline and rifampicin (in 19 cases). Only 10 patients (13.3%) suffered from complications. No differences in resolution were observed according to the antimicrobial regimen. Microbiological laboratory workers are still at risk of developing LAB. Improvements in safety seem to be the best means of

Sea spray aerosol chemical composition: elemental and molecular mimics for laboratory studies of heterogeneous and multiphase reactions.

PubMed

Bertram, Timothy H; Cochran, Richard E; Grassian, Vicki H; Stone, Elizabeth A

2018-04-03

Sea spray aerosol particles (SSA), formed through wave breaking at the ocean surface, contribute to natural aerosol particle concentrations in remote regions of Earth's atmosphere, and alter the direct and indirect effects of aerosol particles on Earth's radiation budget. In addition, sea spray aerosol serves as suspended surface area that can catalyze trace gas reactions. It has been shown repeatedly that sea spray aerosol is heavily enriched in organic material compared to the surface ocean. The selective enrichment of organic material complicates the selection of representative molecular mimics of SSA for laboratory or computational studies. In this review, we first provide a short introduction to SSA formation processes and discuss chemical transformations of SSA that occur in polluted coastal regions and remote pristine air. We then focus on existing literature of the chemical composition of nascent SSA generated in controlled laboratory experiments and field investigations. We combine the evidence on the chemical properties of nascent SSA with literature measurements of SSA water uptake to assess SSA molecular composition and liquid water content. Efforts to speciate SSA organic material into molecular classes and specific molecules have led to the identification of saccharides, alkanes, free fatty acids, anionic surfactants, dicarboxylic acids, amino acids, proteinaceous matter, and other large macromolecules. However to date, less than 25% of the organic mass of nascent SSA has been quantified at a molecular level. As discussed here, quantitative measurements of size resolved elemental ratios, combined with determinations of water uptake properties, provides unique insight on the concentration of ions within SSA as a function of particle size, pointing to a controlling role for relative humidity and the hygroscopicity of SSA organic material at small particle diameters.

Factors influencing biosafety level and LAI among the staff of medical laboratories.

PubMed

Kozajda, Anna; Bródka, Karolina; Szadkowska-Stańczyk, Irena

2013-01-01

The aim of the study was to assess the biological risks of medical laboratory employees with particular focus on laboratory acquired infection (LAI), activities having the greatest risk, accidents with biological material, post exposure procedure, preventive measures and workers' knowledge about biological exposure. The study involved 9 laboratories. A questionnaire survey was attended by 123 employees and 9 heads of these units with the use of two questionnaires for laboratory workers and the managers. 32.5% of the respondents (40 persons) had an accident at least once. Needlestick or a broken glass injury covered 18.7% respondents (23 persons), while splashing the skin, mucous membranes or conjunctivae related to 22.8% (28 persons). Among the employees who had an accident, only 45% of the respondents (18 persons) reported this to the manager. Microbes dominant in the biological material were known only to 57 respondents (46.3%), less than half could correctly give an example of a disease (57 persons, 46.3%). More than half of the respondents admitted that they do not know all of the possible routes of infection while working in the laboratory (68 persons, 55.3%). In the study population, a high incidence of accidents was observed, usually during blood sampling and transfer of biological material. Condition of the workers' equipment with personal protective measures and laboratory facilities in devices to reduce the risk of infection and procedures for handling the potentially infectious material should be considered as insufficient. Lack of basic knowledge of the employees about biohazards at workplaces was shown.

Centrifuge workers study. Phase II, completion report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wooten, H.D.

1994-09-01

Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey tomore » evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom.« less

[Health promotion in gas industrial workers].

PubMed

Volodina, E P; Tiagnenko, V A; Novikov, I V

2004-01-01

Health promotion in the workers of the limited liability company "Astrakhangazprom" in their working places (without discontinuing work) with the complexes of nutrients (including omega-3) enriched with vitamins, macro- and microelements, made in Russia yielded a positive therapeutic effect in improving the health status, in normalizing and improving laboratory and instrumental data, and in reducing sick cases with temporary disability. The duration of a health promotion course was 2 months.

[Occupational stress effects on work ability in chemistry workers].

PubMed

Yang, Huifang; Wang, Mianzhen; Wang, Zhiming; Lan, Yajia

2004-03-01

Investigating the status of work ability and occupational stress in 1030 chemistry workers at levels of chemical materials and explore their relationship and influence factors (481 workers of study group, 549 workers of control group). Work ability and occupational stress were measured with the work ability index (WAI) and occupational stress questionnaire (OSQ). The risk factors of work ability decline were evaluated. WAI and OSQ scores scores are significantly different between study group and control group (P < 0.01), and work ability correlated inversely with occupational stress (P < 0.01). The WAI scores are reducing with a higher of the OSQ. The work ability of chemistry-workers became lower with the increasing of age. Variables that influence work ability included the factors of disorder of musculoskeletal function (OR = 2.884), assessment of the current health (OR = 2.651), the diseases (OR = 2.498), emotion status (OR = 2.407), physical load (OR = 1.254) and lack of exercise (OR = 1.956). The stress levels and stress factors had affected work ability in chemistry-workers, and it was suggested that the findings could be helpful for the measures protecting and promoting of work ability on the health of workers.

Behavioral determinants of occupational exposure to chemical agents.

PubMed

Meijman, T F; Ulenbelt, P; Lumens, M E; Herber, R F

1996-01-01

In the demand-control model (see T. Theorell & R. A. Karasek, 1996), it is hypothesized that workers in active jobs (high demands-high decision latitude) can exert effective coping strategies when confronted with environmental stessors. Thus, when exposed to similar levels of a chemical agent, lower concentrations of this agent in blood could be expected in these workers in comparison with workers in passive jobs. This theory was tested in 2 studies of lead-exposed workers: 18 male Caucasian workers from an electric accumulatory factory and 18 male Caucasian workers from a lead smelting factory. The results did not follow the hypothesized outcomes. In the work environment of the workers in active jobs, lower concentrations of lead in air were measured, but higher levels of lead in blood were observed in these workers. The opposite was true of workers in passive jobs. Differences in hygienic behavior at work may explain these unexpected results.

Cohort mortality study of capacitor manufacturing workers, 1944-2000.

PubMed

Mallin, Katherine; McCann, Ken; D'Aloisio, Aimee; Freels, Sally; Piorkowski, Julie; Dimos, John; Persky, Victoria

2004-06-01

A mortality study of workers employed between 1944 and 1977 at an electrical capacitor manufacturing plant where polychlorinated biphenyls (PCBs), chlorinated naphthalenes, and other chemicals were used was undertaken. Age, gender, and calendar year-adjusted standardized mortality ratios (SMRs) were calculated for 2885 white workers. Total mortality and all-cancer mortality were similar to expected in both males and females. Females employed 10 or more years had a significantly elevated SMR of 6.2 for liver/biliary cancer. Intestinal cancer was significantly elevated in females employed 5 or more years after PCBs were introduced (SMR = 2.2). In males, stomach cancer (SMR = 2.2) and thyroid cancer (SMR = 15.2) were significantly elevated. Although individual exposure assessment was limited, PCBs alone or in combination with other chemicals could be associated with increased risks for liver/biliary, stomach, intestinal, and thyroid cancer.

EPA Environmental Chemistry Laboratory

NASA Technical Reports Server (NTRS)

1993-01-01

The Environmental Protection Agency's (EPA) Chemistry Laboratory (ECL) is a national program laboratory specializing in residue chemistry analysis under the jurisdiction of the EPA's Office of Pesticide Programs in Washington, D.C. At Stennis Space Center, the laboratory's work supports many federal anti-pollution laws. The laboratory analyzes environmental and human samples to determine the presence and amount of agricultural chemicals and related substances. Pictured, ECL chemists analyze environmental and human samples for the presence of pesticides and other pollutants.

Genotoxic Effects of Exposure to Gasoline Fumes on Petrol Pump Workers.

PubMed

Shaikh, Amrin; Barot, Darshana; Chandel, Divya

2018-04-01

Petrol pump workers are occupationally exposed to gasoline and its fumes consisting of several mutagenic chemicals. To evaluate the genotoxic effects of exposure to gasoline fumes on petrol pump workers. The study groups included 70 petrol pump workers (exposed group) and 70 healthy age-matched individuals with no known exposure (comparison group). Buccal micronucleus cytome assay (BMCyt) was performed to check the genotoxicity caused due to inhalation of gasoline fumes. The frequencies of micronucleated cells, nuclear bud, condensed chromatin cells, karyorrhectic cells, pyknotic cells, and karyolytic cells were significantly higher in the exposed workers compared to the comparison group. Exposure to gasoline fumes is associated with increased frequency of cell abnormalities. This may lead to various health consequences including cancer in those occupationally exposed to gasoline fumes.

Identification of an ant queen pheromone regulating worker sterility.

PubMed

Holman, Luke; Jørgensen, Charlotte G; Nielsen, John; d'Ettorre, Patrizia

2010-12-22

The selective forces that shape and maintain eusocial societies are an enduring puzzle in evolutionary biology. Ordinarily sterile workers can usually reproduce given the right conditions, so the factors regulating reproductive division of labour may provide insight into why eusociality has persisted over evolutionary time. Queen-produced pheromones that affect worker reproduction have been implicated in diverse taxa, including ants, termites, wasps and possibly mole rats, but to date have only been definitively identified in the honeybee. Using the black garden ant Lasius niger, we isolate the first sterility-regulating ant queen pheromone. The pheromone is a cuticular hydrocarbon that comprises the majority of the chemical profile of queens and their eggs, and also affects worker behaviour, by reducing aggression towards objects bearing the pheromone. We further show that the pheromone elicits a strong response in worker antennae and that its production by queens is selectively reduced following an immune challenge. These results suggest that the pheromone has a central role in colony organization and support the hypothesis that worker sterility represents altruistic self-restraint in response to an honest quality signal.

Health Risks to Ecological Workers on Contaminated Sites - the Department of Energy as a Case Study

PubMed Central

Burger, Joanna; Gochfeld, Michael

2016-01-01

Background At most contaminated sites the risk to workers focuses on those ‘hazardous waste workers’ directly exposed to chemicals or radionuclides, and to the elaborate approaches implemented to protecting their health and safety. Ecological workers generally are not considered. Objectives To explore the risks to the health and safety of ecological workers on sites with potential chemical and radiological exposures before, during or after remediation of contamination. To use the U.S. Department of Energy as a case study, and to develop concepts that apply generally to sites contaminated with hazardous or nuclear wastes, Methods Develop categories of ecological workers, describe their usual jobs, and provide information on the kinds of risks they face. Ecological activities include continued surveillance and monitoring work on any sites with residual contamination, subject to institutional controls and engineered barriers following closure as well as the restoration. Results The categories of ecological workers and their tasks include 1) Ecological characterization, mapping and monitoring, 2) biodiversity studies, 2) Contaminant fate and transport, 3) On-going industrial activities 4) Remediation activities (environmental management), 5) Environmental restoration, 6) Post-cleanup surveillance and monitoring, and 7) Post-closure future site activities. There are a set of functional activities that can occur with different frequencies and intensities, including visual inspection, collecting biological samples, collecting media physical samples, collecting biological debris, restoration planting, and maintaining ecosystems. Conclusions Ecological workers face different exposures and risks than other environmental cleanup workers. Many of their tasks mimic shift work with long hours leading to fatigue, and they are exposed to biological as well as chemical/radiological hazards. DOE and other entities need to examine the risks to ecological workers on site with an

Screening methods for chemical warfare agents in environmental samples at the Edgewood area of Aberdeen Proving Ground, Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakubowski, E.M.; Borland, M.M.; Norris, L.

1995-06-01

The U.S. Army Edgewood Research, Development and Engineering Center, the U.S. Army Aberdeen Proving Ground Support Activity, Directorate of Safety, Health and the Environment and SciTech Services Inc., an independent contractor, have developed an approach for screening environmental samples for the presence of chemical warfare agents. Since 1918, the Edgewood area of Aberdeen Proving Ground has been a research and testing ground for toxic agent compounds. Since these materials are considered highly toxic, screening for their presence in environmental samples is necessary for safe shipment to contract laboratories for testing by EPA guidelines. The screening ensures worker safety and maintainsmore » U.S. Army standards for transportation of materials potentially contaminated with chemical warfare agents. This paper describes the screening methodology.« less

Mortality of Solenopsis invicta workers (Hymenoptera: Formicidae) after indirect exposure to spores of three entomopathogenic fungi

USDA-ARS?s Scientific Manuscript database

Mortality caused by indirect exposure to Metarhizium (M.) brunneum and Beauveria (B.) bassiana (GHA and NI8) to the red imported fire ant (Solenopsis invicta) workers was evaluated under laboratory conditions. A dual square arena was used to run the bioassays. 50 workers were place in one side of th...

[Labor accidents involving the eyes: assessment of occupational risks involving nursing workers].

PubMed

de Almeida, Cristiana Brasil; Pagliuca, Lorita Marlena Freitag; Leite, Ana Lourdes Almeida e Silva

2005-01-01

The study aimed at identifying nursing workers who were victims of eye accidents and the type of accident; describing the measures taken and proposing Health Education methods. A descriptive and exploratory study was carried out at a public maternity hospital from September 2002 to January 2003. Data were collected through direct observation of the environment and interviews with workers. Subjects were ten professionals (one nurse, two technicians and seven nursing auxiliaries) who were victims of work accidents involving the eye. The accidents were grouped according to the type of material that caused the trauma: chemical substances (4), medication (3), mechanical trauma (1), scalp (1) and urine (1). The results reveal that hospital workers are vulnerable to labor accidents because the environment presents biological, chemical and physical risks. An important step to prevent the occurrence of new accidents would be the prevention of human mistakes through permanent training and the use of protection glasses.

Biochemical effects of vinyl chloride monomer on the liver of occupationally exposed workers.

PubMed

Saad, A A; el-Sewedy, S M; Bader, G A; Mousa, S M; Mahdy, M M

2000-01-01

We investigated the effects of vinyl chloride monomer exposure on the liver of 86 workers by measuring beta-glucuronidase, arylsulfatase A, adenosine deaminase, 5'-nucleotidase and routine liver function enzymes in the sera of the workers. In 21 of them, three or more of these parameters were raised, with a significant decrease in the level of blood glutathione and a significant increase in the enzyme activity level of glutathione S-transferase. Of these 21 workers, 14 had fatty liver infiltration, 8 of whom were also suffering from liver enlargement. Also, 4 workers had liver enlargement without fatty infiltration and 3 had enlarged spleens. The study highlights the need for vigilance in environmental monitoring and medical surveillance of workers exposed to this chemical.

[External respiration parameters in workers engaged in synthetic detergents production].

PubMed

Makhon'ko, M N; Trubetskov, A D

2005-01-01

The study covers results of thorough clinical and functional examination of workers engaged into contemporary chemical production. The authors studied effects caused in immunity parameters, respiratory organs and skin by sensitizing and irritating chemicals. Findings are that the most significant changes in external respiration parameters and high predisposition to respiratory diseases are associated with specific sensitizing to industrial allergen and with higher IgE levels.

Worker training for new threats: a proposed framework.

PubMed

Mitchell, Clifford S; Doyle, Mary L; Moran, John B; Lippy, Bruce; Hughes, Joseph T; Lum, Max; Agnew, Jacqueline

2004-11-01

In an effort to identify health and safety training needs for various groups of workers related to weapons of mass destruction, including chemical, biological, radiological, and nuclear weapons and high yield explosives (CBRNE), a conference, "Worker Training in a New Era: Responding to New Threats," was held at the Johns Hopkins Bloomberg School of Public Health in October 2002. Two questions were addressed: Which general skills and knowledge are common to all workers who might be exposed to terrorist threats from CBRNE weapons? What are the particular skills and knowledge relevant to these threats that are specific to workers in different sectors? Thirteen core components for pre- and post-event training were identified. Pre-event training applies to all workers. Post-event training applies to selected personnel including first responders, skilled support personnel, and other workers involved in these operations. Recommendations to improve worker safety training related to preparedness include: identify specific competencies for worker pre- and post-event training; coordinate Federal policy on worker training for CBRNE hazards; adopt federal guidelines or standards on worker training for new CBRNE threats, based on the competencies and coordinated Federal policy; conduct an inventory of training programs and other resources that could be used or adapted for use for new threats; and develop new training content and methods for pre- and post-event training to address specific competencies. Given the possibility for the introduction of CBRNE threats into the workplace, all workers need some training in the potential hazards involved: the individual worker's specific role in an emergency; incident command; activation of the emergency notification system; use of personal protective equipment (PPE); and safe evacuation of the workplace. While some occupational sectors have developed effective training related to these new threats, there is a need to develop, implement

America's Poisoned Playgrounds: Children and Toxic Chemicals.

ERIC Educational Resources Information Center

Freedberg, Louis

Next to chemical and farm workers, today's children are at the greatest risk from toxic chemicals. Through their normal play activities, children are exposed to a frightening array of toxic hazards, including lead, pesticides, arsenic, and unknown dangers from abandoned landfills and warehouses. Through a series of documented examples, the author…

Laboratory racks are installed in the MPLM Leonardo

NASA Technical Reports Server (NTRS)

2000-01-01

Workers in the Space Station Processing Facility watch as a laboratory rack moves into the Multi-Purpose Logistics Module Leonardo. The MPLM is the first of three such pressurized modules that will serve as the International Space Station's '''moving vans,''' carrying laboratory racks filled with equipment, experiments and supplies to and from the Space Station aboard the Space Shuttle. Leonardo will be launched March 1, 2001, on Shuttle mission STS-102 On that flight, Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, being carried to the ISS on the Jan. 19, 2001, launch of STS-98.

Laboratory racks are installed in the MPLM Leonardo

NASA Technical Reports Server (NTRS)

2000-01-01

Workers inside the Multi-Purpose Logistics Module Leonardo complete installation of a laboratory rack. The MPLM is the first of three such pressurized modules that will serve as the International Space Station's '''moving vans,''' carrying laboratory racks filled with equipment, experiments and supplies to and from the Space Station aboard the Space Shuttle. Leonardo will be launched March 1, 2001, on Shuttle mission STS-102 On that flight, Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, being carried to the ISS on the Jan. 19, 2001, launch of STS-98.

Laboratory racks are installed in the MPLM Leonardo

NASA Technical Reports Server (NTRS)

2000-01-01

Workers inside the Multi-Purpose Logistics Module Leonardo oversee installation of a laboratory rack. The MPLM is the first of three such pressurized modules that will serve as the International Space Station's '''moving vans,''' carrying laboratory racks filled with equipment, experiments and supplies to and from the Space Station aboard the Space Shuttle. Leonardo will be launched March 1, 2001, on Shuttle mission STS-102 On that flight, Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, being carried to the ISS on the Jan. 19, 2001, launch of STS-98.

Laboratory racks are installed in the MPLM Leonardo

NASA Technical Reports Server (NTRS)

2000-01-01

Inside the Multi-Purpose Logistics Module Leonardo, a worker looks at the placement of a laboratory rack. The MPLM is the first of three such pressurized modules that will serve as the International Space Station's '''moving vans,''' carrying laboratory racks filled with equipment, experiments and supplies to and from the Space Station aboard the Space Shuttle. Leonardo will be launched March 1, 2001, on Shuttle mission STS-102 On that flight, Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, being carried to the ISS on the Jan. 19, 2001, launch of STS-98.

Decreased serum free testosterone in workers exposed to high levels of di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP): a cross-sectional study in China.

PubMed

Pan, Guowei; Hanaoka, Tomoyuki; Yoshimura, Mariko; Zhang, Shujuan; Wang, Ping; Tsukino, Hiromasa; Inoue, Koichi; Nakazawa, Hiroyuki; Tsugane, Shoichiro; Takahashi, Ken

2006-11-01

Observations of adverse developmental and reproductive effects in laboratory animals and wildlife have fueled increasing public concern regarding the potential for various chemicals to impair human fertility. Our objective in this study was to assess the effect of occupational exposure to high levels of phthalate esters on the balance of gonadotropin and gonadal hormones including luteinizing hormone, follicle-stimulating hormone, free testosterone (fT), and estradiol. We examined urine and blood samples of 74 male workers at a factory producing unfoamed polyvinyl chloride flooring exposed to di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) and compared them with samples from 63 male workers from a construction company, group matched for age and smoking status. Compared to the unexposed workers, the exposed workers had substantially and significantly elevated concentrations of mono-n-butyl phthalate (MBP; 644.3 vs. 129.6 microg/g creatinine, p < 0.001) and mono-2-ethylhexyl phthalate (MEHP; 565.7 vs. 5.7 microg/g creatinine, p < 0.001). fT was significantly lower (8.4 vs. 9.7 microg/g creatinine, p = 0.019) in exposed workers than in unexposed workers. fT was negatively correlated to MBP (r = -0.25, p = 0.03) and MEHP (r = -0.19, p = 0.095) in the exposed worker group. Regression analyses revealed that fT decreases significantly with increasing total phthalate ester score (the sum of quartiles of MBP and MEHP; r = -0.26, p = 0.002). We observed a modest and significant reduction of serum fT in workers with higher levels of urinary MBP and MEHP compared with unexposed workers.

ETR HEAT EXCHANGER BUILDING, TRA644. WORKERS ARE INSTALLING HEAT EXCHANGER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR HEAT EXCHANGER BUILDING, TRA-644. WORKERS ARE INSTALLING HEAT EXCHANGER PIPING. INL NEGATIVE NO. 56-3122. Jack L. Anderson, Photographer, 9/21/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Gender, airborne chemical monitoring, and physical work environment are related to indoor air symptoms among nonindustrial workers in the Klang Valley, Malaysia.

PubMed

Syazwan, Aizat Ismail; Hafizan, Juahir; Baharudin, Mohd Rafee; Azman, Ahmad Zaid Fattah; Izwyn, Zulkapri; Zulfadhli, Ismail; Syahidatussyakirah, Katis

2013-01-01

The purpose of this study was to analyze the relationship of airborne chemicals and the physical work environment risk element on the indoor air symptoms of nonindustrial workers. A cross-sectional study consisting of 200 office workers. A random selection of 200 buildings was analyzed for exposure and indoor air symptoms based on a pilot study in the Klang Valley, Malaysia. A set of modified published questionnaires by the Department of Occupational Safety and Health (DOSH), Malaysia and a previous study (MM040NA questionnaire) pertaining to indoor air symptoms was used in the evaluation process of the indoor air symptoms. Statistical analyses involving logistic regression and linear regression were used to determine the relationship between exposure and indoor air symptoms for use in the development of an indoor risk matrix. The results indicate that some indoor air pollutants (carbon monoxide, formaldehyde, total volatile organic compound, and dust) are related to indoor air symptoms of men and women. Temperature and relative humidity showed a positive association with complaints related to the perceived indoor environmental condition (drafts and inconsistency of temperature). Men predominantly reported general symptoms when stratification of gender involved exposure to formaldehyde. Women reported high levels of complaints related to mucosal and general symptoms from exposure to the dust level indoors. Exposure to pollutants (total volatile organic compounds, carbon monoxide, and formaldehyde) and physical stressors (air temperature and relative humidity) influence reported symptoms of office workers. These parameters should be focused upon and graded as one of the important elements in the grading procedure when qualitatively evaluating the indoor environment.

Field and laboratory data describing physical and chemical characteristics of metal-contaminated flood-plain deposits downstream from Lead, west-central South Dakota

USGS Publications Warehouse

Marron, D.C.

1988-01-01

Samples from metal-contaminated flood-plain sediments at 9 sites downstream from Lead, in west-central South Dakota, were collected during the summers of 1985-87 to characterize aspects of the sedimentology, chemistry, and geometry of a deposit that resulted from the discharge of a large volume of mining wastes into a river system. Field and laboratory data include stratigraphic descriptions, chemical contents and grain-size distributions of samples, and surveyed flood-plain positions of samples. This report describes sampling-site locations, and methods of sample collection and preservation, and subsequent laboratory analysis. Field and laboratory data are presented in 4 figures and 11 tables in the ' Supplemental Data ' section at the back of the report. (USGS)

Water Chemistry Laboratory Manual.

ERIC Educational Resources Information Center

Jenkins, David; And Others

This manual of laboratory experiments in water chemistry serves a dual function of illustrating fundamental chemical principles of dilute aqueous systems and of providing the student with some familiarity with the chemical measurements commonly used in water and wastewater analysis. Experiments are grouped in categories on the basis of similar…

[Free radical oxidation in workers engaged into petrochemistry].

PubMed

Iapparov, R N; Kamilov, R F; Shakirov, D F; Sidorcheva, O V

2007-01-01

The article deals with results of studies covering free radical oxidation and peroxidation in RBC, serum, saliva and urine of petrochemistry workers. Individuals exposed to chemical pollutants in production of rubber, tyre and mechanical rubber goods appeared to have considerably increased free radical oxidation parameters in RBC, serum, saliva and urine.

Framework for leadership and training of Biosafety Level 4 laboratory workers.

PubMed

Le Duc, James W; Anderson, Kevin; Bloom, Marshall E; Estep, James E; Feldmann, Heinz; Geisbert, Joan B; Geisbert, Thomas W; Hensley, Lisa; Holbrook, Michael; Jahrling, Peter B; Ksiazek, Thomas G; Korch, George; Patterson, Jean; Skvorak, John P; Weingartl, Hana

2008-11-01

Construction of several new Biosafety Level 4 (BSL-4) laboratories and expansion of existing operations have created an increased international demand for well-trained staff and facility leaders. Directors of most North American BSL-4 laboratories met and agreed upon a framework for leadership and training of biocontainment research and operations staff. They agreed on essential preparation and training that includes theoretical consideration of biocontainment principles, practical hands-on training, and mentored on-the-job experiences relevant to positional responsibilities as essential preparation before a person's independent access to a BSL-4 facility. They also agreed that the BSL-4 laboratory director is the key person most responsible for ensuring that staff members are appropriately prepared for BSL-4 operations. Although standardized certification of training does not formally exist, the directors agreed that facility-specific, time-limited documentation to recognize specific skills and experiences of trained persons is needed.

Green Jobs: Definition and Method of Appraisal of Chemical and Biological Risks.

PubMed

Cheneval, Erwan; Busque, Marc-Antoine; Ostiguy, Claude; Lavoie, Jacques; Bourbonnais, Robert; Labrèche, France; Bakhiyi, Bouchra; Zayed, Joseph

2016-04-01

In the wake of sustainable development, green jobs are developing rapidly, changing the work environment. However a green job is not automatically a safe job. The aim of the study was to define green jobs, and to establish a preliminary risk assessment of chemical substances and biological agents for workers in Quebec. An operational definition was developed, along with criteria and sustainable development principles to discriminate green jobs from regular jobs. The potential toxicity or hazard associated with their chemical and biological exposures was assessed, and the workers' exposure appraised using an expert assessment method. A control banding approach was then used to assess risks for workers in selected green jobs. A double entry model allowed us to set priorities in terms of chemical or biological risk. Among jobs that present the highest risk potential, several are related to waste management. The developed method is flexible and could be adapted to better appraise the risks that workers are facing or to propose control measures. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Susceptibility to measles, rubella, mumps, and varicella-zoster viruses among healthcare workers.

PubMed

Aypak, Cenk; Bayram, Yasemin; Eren, Hayriye; Altunsoy, Adalet; Berktaş, Mustafa

2012-01-01

It is important to identify and immunize susceptible healthcare workers to prevent and control hospital infections. Our aim was to evaluate the specific antibodies against the measles, mumps, and rubella viruses and the varicella zoster virus among healthcare workers in a tertiary-care hospital. A total of 284 healthcare workers (89 men and 195 women; mean age, 33.5 ± 11 years), including 111 nurses, 87 physicians, 34 laboratory technicians, and 52 members of the housekeeping staff, of Van Training and Research Hospital were enrolled in this study. Antibodies were detected with an enzyme-linked immunosorbent assay. The numbers of workers with serological susceptibility to mumps, measles, rubella, or chicken pox were 26 (9.2%), 18 (6.3%), 7 (2.5%), and 5 (1.8%), respectively. Although the difference was not statistical significant, the rate of seroprevalence of antibodies was lowest for measles (90.8%; p>0.05). Susceptibility to measles, mumps, and rubella, and chicken pox was more prevalent among young healthcare workers (p<0.001). Not all healthcare workers born before 1957 were immune to these vaccine-preventable diseases. These data confirm that screening and vaccination of susceptible healthcare workers is essential regardless of age.

Molting Site Fidelity in Workers of Formosan Subterranean Termites (Isoptera: Rhinotermitidae).

PubMed

Kakkar, G; Osbrink, W; Mullins, A; Su, N-Y

2017-12-05

Spatial assessment of molting in workers of Coptotermes formosanus Shiraki was conducted in laboratory-reared colonies using extended foraging arenas. Workers at a premolt stage were found concentrated in the nest or in a planar arena near the nest. However, molting individuals were found exclusively in the central nest and they stayed inside or near the central nest for at least 36 h postmolting. The absence of premolt workers at foraging sites suggests that the workers have an affinity to the nest for molting and the second study on nest-fidelity evaluation suggested that the workers molt in the proximity of eggs. The molting site fidelity by workers in a colony ensures that speeding up the time for mortality induced by chitin synthesis inhibitor (CSI) baits will not result in an inhibitory cascade of dead termites around the bait stations. Thus, speeding up the elimination of a C. formosanus colony using CSI baits with the addition of molt-accelerating compounds will not lead to secondary repellency. Reasons for the molting-site fidelity amongst workers in a colony are discussed. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Thermal burn and electrical injuries among electric utility workers, 1995-2004.

PubMed

Fordyce, Tiffani A; Kelsh, Michael; Lu, Elizabeth T; Sahl, Jack D; Yager, Janice W

2007-03-01

This study describes the occurrence of work-related injuries from thermal-, electrical- and chemical-burns among electric utility workers. We describe injury trends by occupation, body part injured, age, sex, and circumstances surrounding the injury. This analysis includes all thermal, electric, and chemical injuries included in the Electric Power Research Institute (EPRI) Occupational Health and Safety Database (OHSD). There were a total of 872 thermal burn and electric shock injuries representing 3.7% of all injuries, but accounting for nearly 13% of all medical claim costs, second only to the medical costs associated with sprain- and strain-related injuries (38% of all injuries). The majority of burns involved less than 1 day off of work. The head, hands, and other upper extremities were the body parts most frequently injured by burns or electric shocks. For this industry, electric-related burns accounted for the largest percentage of burn injuries, 399 injuries (45.8%), followed by thermal/heat burns, 345 injuries (39.6%), and chemical burns, 51 injuries (5.8%). These injuries also represented a disproportionate number of fatalities; of the 24 deaths recorded in the database, contact with electric current or with temperature extremes was the source of seven of the fatalities. High-risk occupations included welders, line workers, electricians, meter readers, mechanics, maintenance workers, and plant and equipment operators.

Chemical Properties of Brown Carbon Aerosol Generated at the Missoula Fire Sciences Laboratory

NASA Astrophysics Data System (ADS)

Washenfelder, R. A.; Womack, C.; Franchin, A.; Middlebrook, A. M.; Wagner, N.; Manfred, K.

2017-12-01

Aerosol scattering and absorption are still among the largest uncertainties in quantifying radiative forcing. Biomass burning is a major source of light-absorbing carbonaceous aerosol in the United States. These aerosol are generally classified into two categories: black carbon (graphitic-like aerosol that absorbs broadly across the ultraviolet and visible spectral regions) and brown carbon (organic aerosol that absorbs strongly in the ultraviolet and near-visible spectral regions). The composition, volatility, and chemical aging of brown carbon are poorly known, but are important to understanding its radiative effects. We deployed three novel instruments to the Missoula Fire Sciences Laboratory in 2016 to measure brown carbon absorption: a photoacoustic spectrometer, broadband cavity enhanced spectrometer, and particle-into-liquid sampler coupled to a liquid waveguide capillary cell. The instruments sampled from a shared inlet with well-characterized dilution and thermal denuding. We sampled smoke from 32 controlled burns of fuels relevant to western U.S. wildfires. We use these measurements to determine the volatility of water-soluble brown carbon, and compare this to the volatility of water-soluble organic aerosol and total organic aerosol. We further examine the wavelength-dependence of the water-soluble brown carbon absorption as a function of denuder temperature. Together this gives new information about the solubility, volatility, and chemical composition of brown carbon.

Effects of chemical smokes on flora and fauna under field and laboratory exposures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaeffer, D.J.; Novak, E.W.; Lower, W.R.

1987-06-01

Various types of obscurant smokes are used routinely in training by the U.S. Army. Because continued routine use of the smokes could be detrimental to the native flora and fauna at training sites, a preliminary biological and chemical field study of fogoil, hexachloroethane, and tank diesel smokes was conducted. Smoke plumes were sampled and chemically analyzed at distances of 15-150 m from the smoke source where Tradescantia clones 4430 and 03 and the native plant Ambrosia dumosa and the native rodent Dipodomys merriami were exposed for 30 min. In addition, Tradescantia clone 4430 was exposed to tank diesel in themore » laboratory at concentration levels equivalent to exposure at 15 and 50 m. Tradescantia clones were examined for mutagenic effects indicated by micronuclei induction in developing pollen and pink somatic mutations in stamen hairs. Photosynthetic perturbations were measured in Tradescantia and A. dumosa using variable fluorescence induction. Animals were examined for sister chromatid exchanges and chromosome aberrations. It was found that all of the smokes tested exerted varying degrees of physiological and mutagenic effects in one or more assay system at one or more exposure distance. The studies reported here indicate that exposed ecological systems, or at least components of these systems, are at a higher risk than are unexposed components (e.g., organisms) for several types of damage attributed to obscurant smoke exposure.« less

Effects of chemical smokes on flora and fauna under field and laboratory exposures.

PubMed

Schaeffer, D J; Novak, E W; Lower, W R; Yanders, A; Kapila, S; Wang, R

1987-06-01

Various types of obscurant smokes are used routinely in training by the U.S. Army. Because continued routine use of the smokes could be detrimental to the native flora and fauna at training sites, a preliminary biological and chemical field study of fogoil, hexachloroethane, and tank diesel smokes was conducted. Smoke plumes were sampled and chemically analyzed at distances of 15-150 m from the smoke source where Tradescantia clones 4430 and 03 and the native plant Ambrosia dumosa and the native rodent Dipodomys merriami were exposed for 30 min. In addition, Tradescantia clone 4430 was exposed to tank diesel in the laboratory at concentration levels equivalent to exposure at 15 and 50 m. Tradescantia clones were examined for mutagenic effects indicated by micronuclei induction in developing pollen and pink somatic mutations in stamen hairs. Photosynthetic perturbations were measured in Tradescantia and A. dumosa using variable fluorescence induction. Animals were examined for sister chromatid exchanges and chromosome aberrations. It was found that all of the smokes tested exerted varying degrees of physiological and mutagenic effects in one or more assay system at one or more exposure distance. The studies reported here indicate that exposed ecological systems, or at least components of these systems, are at a higher risk than are unexposed components (e.g., organisms) for several types of damage attributed to obscurant smoke exposure.

Mild Illness in Avian Influenza A(H7N9) Virus–Infected Poultry Worker, Huzhou, China, April 2013

PubMed Central

Lv, Huakun; Han, Jiankang; Zhang, Peng; Lu, Ye; Wen, Dong; Cai, Jian; Liu, Shelan; Sun, Jimin; Yu, Zhao; Zhang, Heng; Gong, Zhenyu; Chen, Enfu

2013-01-01

During April 2013 in China, mild respiratory symptoms developed in 1/61 workers who had culled influenza A(H7N9) virus–infected poultry. Laboratory testing confirmed A(H7N9) infection in the worker and showed that the virus persisted longer in sputum than pharyngeal swab samples. Pharyngeal swab samples from the other workers were negative for A(H7N9) virus. PMID:24209963

Epidemiological study of health hazards among workers handling engineered nanomaterials

NASA Astrophysics Data System (ADS)

Liou, Saou-Hsing; Tsou, Tsui-Chun; Wang, Shu-Li; Li, Lih-Ann; Chiang, Hung-Che; Li, Wan-Fen; Lin, Pin-Pin; Lai, Ching-Huang; Lee, Hui-Ling; Lin, Ming-Hsiu; Hsu, Jin-Huei; Chen, Chiou-Rong; Shih, Tung-Sheng; Liao, Hui-Yi; Chung, Yu-Teh

2012-08-01

The aim of this study was to establish and identify the health effect markers of workers with potential exposure to nanoparticles (20-100 nm) during manufacturing and/or application of nanomaterials. For this cross-sectional study, we recruited 227 workers who handled nanomaterials and 137 workers for comparison who did not from 14 plants in Taiwan. A questionnaire was used to collect data on exposure status, demographics, and potential confounders. The health effect markers were measured in the medical laboratory. Control banding from the Nanotool Risk Level Matrix was used to categorize the exposure risk levels of the workers. The results showed that the antioxidant enzyme, superoxide dismutase (SOD) in risk level 1 (RL1) and risk level 2 (RL2) workers was significantly ( p < 0.05) lower than in control workers. A significantly decreasing gradient was found for SOD (control > RL1 > RL2). Another antioxidant, glutathione peroxidase (GPX), was significantly lower only in RL1 workers than in the control workers. The cardiovascular markers, fibrinogen and ICAM (intercellular adhesion molecule), were significantly higher in RL2 workers than in controls and a significant dose-response with an increasing trend was found for these two cardiovascular markers. Another cardiovascular marker, interleukin-6, was significantly increased among RL1 workers, but not among RL2 workers. The accuracy rate for remembering 7-digits and reciting them backwards was significantly lower in RL2 workers (OR = 0.48) than in controls and a significantly reversed gradient was also found for the correct rate of backward memory (OR = 0.90 for RL1, OR = 0.48 for RL2, p < 0.05 in test for trend). Depression of antioxidant enzymes and increased expression of cardiovascular markers were found among workers handling nanomaterials. Antioxidant enzymes, such as SOD and GPX, and cardiovascular markers, such as fibrinogen, ICAM, and interluekin-6, are possible biomarkers for medical surveillance of

Framework for Leadership and Training of Biosafety Level 4 Laboratory Workers

PubMed Central

Anderson, Kevin; Bloom, Marshall E.; Estep, James E.; Feldmann, Heinz; Geisbert, Joan B.; Geisbert, Thomas W.; Hensley, Lisa; Holbrook, Michael; Jahrling, Peter B.; Ksiazek, Thomas G.; Korch, George; Patterson, Jean; Skvorak, John P.; Weingartl, Hana

2008-01-01

Construction of several new Biosafety Level 4 (BSL-4) laboratories and expansion of existing operations have created an increased international demand for well-trained staff and facility leaders. Directors of most North American BSL-4 laboratories met and agreed upon a framework for leadership and training of biocontainment research and operations staff. They agreed on essential preparation and training that includes theoretical consideration of biocontainment principles, practical hands-on training, and mentored on-the-job experiences relevant to positional responsibilities as essential preparation before a person’s independent access to a BSL-4 facility. They also agreed that the BSL-4 laboratory director is the key person most responsible for ensuring that staff members are appropriately prepared for BSL-4 operations. Although standardized certification of training does not formally exist, the directors agreed that facility-specific, time-limited documentation to recognize specific skills and experiences of trained persons is needed. PMID:18976549

An infrared free-electron laser for the Chemical Dynamics Research Laboratory. Design report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, D.

1992-04-01

This document describes a free-electron laser (FEL) proposed as part of the Chemical Dynamics Research Laboratory (CDRL), a user facility that also incorporates several advanced lasers of conventional design and two beamlines for the ALS. The FEL itself addresses the needs of the chemical sciences community for a high-brightness, tunable source covering a broad region of the infrared spectrum -- from 3 to 50 {mu}m. All of these sources, together with a variety of sophisticated experimental stations, will be housed in a new building to be located adjacent to the ALS. The radiation sources can be synchronized to permit powerfulmore » two-color, pump-probe experiments that will further our fundamental understanding of chemical dynamics at the molecular level, especially those aspects relevant to practical issues in combustion chemistry. The technical approach adopted in this design makes use of superconducting radiofrequency (SCRF) accelerating structures. The primary motivation for adopting this approach was to meet the user requirement for wavelength stability equal to one part in 10{sup 4}. Previous studies concluded that a wavelength stability of only one part in 10{sup 3} could be achieved with currently available room-temperature technology. In addition, the superconducting design operates in a continuous-wave (cw) mode and hence offers considerably higher average optical output power. It also allows for various pulse-gating configurations that will permit simultaneous multiuser operations. A summary of the comparative performance attainable with room-temperature and superconducting designs is given. The FEL described in this report provides a continuous train of 30-ps micropulses, with 100{mu}J of optical energy per micropulse, at a repetition rate of 6.1 MHz. The device can also deliver pulses at a cw repetition rate of 12.2 MHz, with a peak power of 50 {mu}J per micropulse. 70 ref.« less

Safety in the Chemical Laboratory: The Selection of Eyewash Stations for Laboratory Use.

ERIC Educational Resources Information Center

Walters, Douglas B.; And Others

1988-01-01

Evaluates and compares common eyewash stations currently being used in laboratories. Discusses types available, installation, water supply needs, and maintenance. Lists current OSHA eyewash station standards. (ML)

Prolonged menstrual cycles in female workers exposed to ethylene glycol ethers in the semiconductor manufacturing industry.

PubMed

Hsieh, G-Y; Wang, J-D; Cheng, T-J; Chen, P-C

2005-08-01

It has been shown that female workers exposed to ethylene glycol ethers (EGEs) in the semiconductor industry have higher risks of spontaneous abortion, subfertility, and menstrual disturbances, and prolonged waiting time to pregnancy. To examine whether EGEs or other chemicals are associated with long menstrual cycles in female workers in the semiconductor manufacturing industry. Cross-sectional questionnaire survey during the annual health examination at a wafer manufacturing company in Taiwan in 1997. A three tiered exposure-assessment strategy was used to analyse the risk. A short menstrual cycle was defined to be a cycle less than 24 days and a long cycle to be more than 35 days. There were 606 valid questionnaires from 473 workers in fabrication jobs and 133 in non-fabrication areas. Long menstrual cycles were associated with workers in fabrication areas compared to those in non-fabrication areas. Using workers in non-fabrication areas as referents, workers in photolithography and diffusion areas had higher risks for long menstrual cycles. Workers exposed to EGEs and isopropanol, and hydrofluoric acid, isopropanol, and phosphorous compounds also showed increased risks of a long menstrual cycle. Exposure to multiple chemicals, including EGEs in photolithography, might be associated with long menstrual cycles, and may play an important role in a prolonged time to pregnancy in the wafer manufacturing industry; however, the prevalence in the design, possible exposure misclassification, and chance should be considered.

Chemical Tracking Systems: Not Your Usual Global Positioning System!

ERIC Educational Resources Information Center

Roy, Ken

2007-01-01

The haphazard storing and tracking of chemicals in the laboratory is a serious safety issue facing science teachers. To get control of your chemicals, try implementing a "chemical tracking system". A chemical tracking system (CTS) is a database of chemicals used in the laboratory. If implemented correctly, a CTS will reduce purchasing costs,…

Laboratory and workplace assessments of rivet bucking bar vibration emissions.

PubMed

McDowell, Thomas W; Warren, Christopher; Xu, Xueyan S; Welcome, Daniel E; Dong, Ren G

2015-04-01

Sheet metal workers operating rivet bucking bars are at risk of developing hand and wrist musculoskeletal disorders associated with exposures to hand-transmitted vibrations and forceful exertions required to operate these hand tools. New bucking bar technologies have been introduced in efforts to reduce workplace vibration exposures to these workers. However, the efficacy of these new bucking bar designs has not been well documented. While there are standardized laboratory-based methodologies for assessing the vibration emissions of many types of powered hand tools, no such standard exists for rivet bucking bars. Therefore, this study included the development of a laboratory-based method for assessing bucking bar vibrations which utilizes a simulated riveting task. With this method, this study evaluated three traditional steel bucking bars, three similarly shaped tungsten alloy bars, and three bars featuring spring-dampeners. For comparison the bucking bar vibrations were also assessed during three typical riveting tasks at a large aircraft maintenance facility. The bucking bars were rank-ordered in terms of unweighted and frequency-weighted acceleration measured at the hand-tool interface. The results suggest that the developed laboratory method is a reasonable technique for ranking bucking bar vibration emissions; the lab-based riveting simulations produced similar rankings to the workplace rankings. However, the laboratory-based acceleration averages were considerably lower than the workplace measurements. These observations suggest that the laboratory test results are acceptable for comparing and screening bucking bars, but the laboratory measurements should not be directly used for assessing the risk of workplace bucking bar vibration exposures. The newer bucking bar technologies exhibited significantly reduced vibrations compared to the traditional steel bars. The results of this study, together with other information such as rivet quality, productivity, tool

Chemical Understanding and Graphing Skills in an Honors Case-Based Computerized Chemistry Laboratory Environment: The Value of Bidirectional Visual and Textual Representations

ERIC Educational Resources Information Center

Dori, Yehudit J.; Sasson, Irit

2008-01-01

The case-based computerized laboratory (CCL) is a chemistry learning environment that integrates computerized experiments with emphasis on scientific inquiry and comprehension of case studies. The research objective was to investigate chemical understanding and graphing skills of high school honors students via bidirectional visual and textual…

WORK SITE CLINICAL AND NEUROBEHAVIORAL ASSESSMENT OF SOLVENT EXPOSED MICROELECTRONICS WORKERS

EPA Science Inventory

A group of 25 workers currently (5), or formerly (20), involved in the manufacture of hybrid microcircuits underwent clinical evaluations at the request of a management-union committee concerned about chronic solvent exposures in a research and development laboratory. attery of n...

Outbreaks where food workers have been implicated in the spread of foodborne disease. Part 7. Barriers to reduce contamination of food by workers.

PubMed

Todd, Ewen C D; Michaels, Barry S; Greig, Judy D; Smith, Debra; Holah, John; Bartleson, Charles A

2010-08-01

Contamination of food and individuals by food workers has been identified as an important contributing factor during foodborne illness investigations. Physical and chemical barriers to prevent microbial contamination of food are hurdles that block or reduce the transfer of pathogens to the food surface from the hands of a food worker, from other foods, or from the environment. In food service operations, direct contact of food by hands should be prevented by the use of barriers, especially when gloves are not worn. Although these barriers have been used for decades in food processing and food service operations, their effectiveness is sometimes questioned or their use may be ignored. Physical barriers include properly engineered building walls and doors to minimize the flow of outside particles and pests to food storage and food preparation areas; food shields to prevent aerosol contamination of displayed food by customers and workers; work clothing designated strictly for work (clothing worn outdoors can carry undesirable microorganisms, including pathogens from infected family members, into the work environment); and utensils such as spoons, tongs, and deli papers to prevent direct contact between hands and the food being prepared or served. Money and ready-to-eat foods should be handled as two separate operations, preferably by two workers. Chemical barriers include sanitizing solutions used to remove microorganisms (including pathogens) from objects or materials used during food production and preparation and to launder uniforms, work clothes, and soiled linens. However, laundering as normally practiced may not effectively eliminate viral pathogens.

Diagnostic performances of clinical laboratory tests using Triton X-100 to reduce the biohazard associated with routine testing of Ebola virus-infected patients.

PubMed

Tempestilli, Massimo; Pucci, Luigia; Notari, Stefania; Di Caro, Antonino; Castilletti, Concetta; Rivelli, Maria Rosaria; Agrati, Chiara; Pucillo, Leopoldo Paolo

2015-11-01

Ebola virus, an enveloped virus, is the cause of the largest and most complex Ebola virus disease (EVD) outbreak in West Africa. Blood or body fluids of an infected person may represent a biohazard to laboratory workers. Laboratory tests of virus containing specimens should be conducted in referral centres at biosafety level 4, but based on the severity of clinical symptoms, basic laboratories might be required to execute urgent tests for patients suspected of EVD. The aim of this work was to compare the analytical performances of laboratory tests when Triton X-100, a chemical agent able to inactivate other enveloped viruses, was added to specimens. Results of clinical chemistry, coagulation and haematology parameters on samples before and after the addition of 0.1% (final concentration) of Triton X-100 and 1 h of incubation at room temperature were compared. Overall, results showed very good agreement by all statistical analyses. Triton X-100 at 0.1% did not significantly affect the results for the majority of the analytes tested. Triton X-100 at 0.1% can be used to reduce the biohazard in performing laboratory tests on samples from patients with EVD without affecting clinical decisions.

Revitalizing chemistry laboratory instruction

NASA Astrophysics Data System (ADS)

McBride, Phil Blake

This dissertation involves research in three major domains of chemical education as partial fulfillment of the requirements for the Ph.D. program in chemistry at Miami University with a major emphasis on chemical education, and concurrent study in organic chemistry. Unit I, Development and Assessment of a Column Chromatography Laboratory Activity, addresses the domain of Instructional Materials Development and Testing. This unit outlines the process of developing a publishable laboratory activity, testing and revising that activity, and subsequently sharing that activity with the chemical education community. A laboratory activity focusing on the separation of methylene blue and sodium fluorescein was developed to demonstrate the effects of both the stationary and mobile phase in conducting a separation. Unit II, Bringing Industry to the Laboratory, addresses the domain of Curriculum Development and Testing. This unit outlines the development of the Chemistry of Copper Mining module, which is intended for use in high school or undergraduate college chemistry. The module uses the learning cycle approach to present the chemistry of the industrial processes of mining copper to the students. The module includes thirteen investigations (three of which are web-based and ten which are laboratory experiments) and an accompanying interactive CD-ROM, which provides an explanation of the chemistry used in copper mining with a virtual tour of an operational copper mine. Unit III, An Alternative Method of Teaching Chemistry. Integrating Lecture and the Laboratory, is a project that addresses the domain of Research in Student Learning. Fundamental Chemistry was taught at Eastern Arizona College as an integrated lecture/laboratory course that met in two-hour blocks on Monday, Wednesday, and Friday. The students taking this integrated course were compared with students taking the traditional 1-hour lectures held on Monday, Wednesday, and Friday, with accompanying 3-hour lab on

Forest worker exposure to airborne herbicide residues in smoke from prescribed fires in the Southern United States

Treesearch

Charles K. McMahon; Parshall B. Bush

1992-01-01

Occupational safety and health concerns have been raised in a number of southern states by workers conducting prescribed burns on forested lands treated with herbicides. Modeling assessments coupled with laboratory experiments have shown that the risk of airborne herbicide residues to workers is insignificant, even if the fire occurs immediately after herbicide...

Laboratory Impacts 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The laboratory impacts at Idaho National Lab consist of neutron radiography reactor doubles throughput; electric vehicle wireless charging; assessing chemical weapons in Panama; hot cell window replacement; developing better batteries and other impacts.

A critical Action Research approach to curriculum development in a laboratory-based chemical engineering course

NASA Astrophysics Data System (ADS)

White, Scott R.

This dissertation is a report of an attempt to critically evaluate a novel laboratory course from within the context of a chemical engineering curriculum. The research was done in a college classroom-laboratory setting, entrenched in the everydayness of classroom activities. All of the students, instructors, and educational researchers were knowing participants in this Action Research study. The students, a mixture of juniors, seniors, & graduate students, worked together on semester-long projects in groups that were mixed by age, gender and academic level. Qualitative techniques were used to gather different forms of representations of the students and instructors' experiences. Emergent patterns from the data gave strength to emergent knowledge claims that informed the instructors and the researcher about what the students were learning about performing experimental work and communicating results with their peers and instructor. The course challenged and in some cases changed the conceptions of instruction previously held by the students and the instructors. The course did not proceed without problems, yet the majority of these problems were overcome by the design of the course. Assertions and recommendations for improvement and application to other educational contexts are suggested.

Topics in Chemical Instrumentation: Robots in the Laboratory--An Overview.

ERIC Educational Resources Information Center

Strimaitis, Janet R.

1989-01-01

Describes the current use of automation in the laboratory. Discusses the need, flexibility, and benefits of automation. Presents a generic system description. Lists commercially available laboratory robots. (MVL)

The Toxicity of Photographic Chemicals.

DTIC Science & Technology

1980-10-01

workers are as subject to nonchemically induced skin disorders as anyone else, a physician must evaluate each case of contact dermatitis in relation to all...be mistaken for a drinking vessel to contain or measure chemicals. 14. Do not eat food or drink beverages in workrooms where chemicals are mixed or...codes have severe restrictions which apply to such activity. Mixing personnel must wear protective clothing and breathing masks. When large quantities of

76 FR 7585 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

..., 2009. Company, Technology MI. Support Group; Including Virtual Workers Reporting to this Location. 74... Professionals. 75,132 NIOXIN Research Lithia Springs, GA December 31, 2009. Laboratories, Inc., Proctor & Gamble...

75 FR 63509 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

.... Products LLC. 74,606 Watson Laboratories, Inc., Carmel, NY September 3, 2009. Watson Pharmaceuticals...--Enterprise Services), Virtual Workers Across the United States. 74,343 JohnsonDiversey Santa Cruz, CA...

Serum PCB levels and congener profiles among US construction workers

PubMed Central

Herrick, Robert F; Meeker, John D; Hauser, Russ; Altshul, Larisa; Weymouth, George A

2007-01-01

Background The presence of PCB in caulking (sealant) material found in masonry buildings has been well-documented in several countries. A recent investigation of 24 buildings in the greater Boston area found that 8 buildings had high PCB levels in caulking materials used around window frames and in joints between masonry blocks. Workers removing caulking material have been shown to have elevated serum PCB levels. Methods This project compared serum PCB levels among male workers who installed and/or removed PCB-containing caulking material from buildings in the greater Boston area with reference serum PCB levels from 358 men from the same area. Serum PCB levels were measured in the same laboratory by liquid-liquid extraction, column chromatography clean-up and dual capillary column GC/microECD analysis. Results When the congener profiles were compared between the reference population and the construction workers, the serum levels of the more volatile, lighter PCBs (di-, tri-and tetrachloro, sum of IUPAC# 6–74) were substantially higher among the construction workers. One of the youngest workers had the lowest total serum PCB levels (sum of 57 congeners) of all 6 workers, but the contribution of more volatile (less chlorinated) PCB congeners (#16, 26,28,33,74,66, and 60) was markedly higher than in other 5 workers and reference men. Only this worker was working on a job that involved removing PCB caulking at the time of the blood sampling. Conclusion While the results of this pilot study are based upon small numbers (6 construction workers who handled PCB caulking), the serum PCB levels among the construction workers exceed the referents. Comparison of the congener profiles suggests that there are substantial differences between the construction workers and the general population samples. These differences, and the similarities of profiles among the construction workers strongly suggest that occupational contact with caulking material can be a major source of PCB

Mortality among aircraft manufacturing workers

PubMed Central

Boice, J. D.; Marano, D. E.; Fryzek, J. P.; Sadler, C. J.; McLaughlin, J. K.

1999-01-01

OBJECTIVES: To evaluate the risk of cancer and other diseases among workers engaged in aircraft manufacturing and potentially exposed to compounds containing chromate, trichloroethylene (TCE), perchloroethylene (PCE), and mixed solvents. METHODS: A retrospective cohort mortality study was conducted of workers employed for at least 1 year at a large aircraft manufacturing facility in California on or after 1 January 1960. The mortality experience of these workers was determined by examination of national, state, and company records to the end of 1996. Standardised mortality ratios (SMRs) were evaluated comparing the observed numbers of deaths among workers with those expected in the general population adjusting for age, sex, race, and calendar year. The SMRs for 40 cause of death categories were computed for the total cohort and for subgroups defined by sex, race, position in the factory, work duration, year of first employment, latency, and broad occupational groups. Factory job titles were classified as to likely use of chemicals, and internal Poisson regression analyses were used to compute mortality risk ratios for categories of years of exposure to chromate, TCE, PCE, and mixed solvents, with unexposed factory workers serving as referents. RESULTS: The study cohort comprised 77,965 workers who accrued nearly 1.9 million person-years of follow up (mean 24.2 years). Mortality follow up, estimated as 99% complete, showed that 20,236 workers had died by 31 December 1996, with cause of death obtained for 98%. Workers experienced low overall mortality (all causes of death SMR 0.83) and low cancer mortality (SMR 0.90). No significant increases in risk were found for any of the 40 specific cause of death categories, whereas for several causes the numbers of deaths were significantly below expectation. Analyses by occupational group and specific job titles showed no remarkable mortality patterns. Factory workers estimated to have been routinely exposed to chromate were

Mortality among aircraft manufacturing workers.

PubMed

Boice, J D; Marano, D E; Fryzek, J P; Sadler, C J; McLaughlin, J K

1999-09-01

To evaluate the risk of cancer and other diseases among workers engaged in aircraft manufacturing and potentially exposed to compounds containing chromate, trichloroethylene (TCE), perchloroethylene (PCE), and mixed solvents. A retrospective cohort mortality study was conducted of workers employed for at least 1 year at a large aircraft manufacturing facility in California on or after 1 January 1960. The mortality experience of these workers was determined by examination of national, state, and company records to the end of 1996. Standardised mortality ratios (SMRs) were evaluated comparing the observed numbers of deaths among workers with those expected in the general population adjusting for age, sex, race, and calendar year. The SMRs for 40 cause of death categories were computed for the total cohort and for subgroups defined by sex, race, position in the factory, work duration, year of first employment, latency, and broad occupational groups. Factory job titles were classified as to likely use of chemicals, and internal Poisson regression analyses were used to compute mortality risk ratios for categories of years of exposure to chromate, TCE, PCE, and mixed solvents, with unexposed factory workers serving as referents. The study cohort comprised 77,965 workers who accrued nearly 1.9 million person-years of follow up (mean 24.2 years). Mortality follow up, estimated as 99% complete, showed that 20,236 workers had died by 31 December 1996, with cause of death obtained for 98%. Workers experienced low overall mortality (all causes of death SMR 0.83) and low cancer mortality (SMR 0.90). No significant increases in risk were found for any of the 40 specific cause of death categories, whereas for several causes the numbers of deaths were significantly below expectation. Analyses by occupational group and specific job titles showed no remarkable mortality patterns. Factory workers estimated to have been routinely exposed to chromate were not at increased risk of total

Laboratory Waste Disposal Manual. Revised Edition.

ERIC Educational Resources Information Center

Stephenson, F. G., Ed.

This manual is designed to provide laboratory personnel with information about chemical hazards and ways of disposing of chemical wastes with minimum contamination of the environment. The manual contains a reference chart section which has alphabetical listings of some 1200 chemical substances with information on the health, fire and reactivity…

Laboratory racks are installed in the MPLM Leonardo

NASA Technical Reports Server (NTRS)

2000-01-01

A worker in the Space Station Processing Facility watches as a laboratory rack moves into the Multi-Purpose Logistics Module Leonardo. The MPLM is the first of three such pressurized modules that will serve as the International Space Station's '''moving vans,''' carrying laboratory racks filled with equipment, experiments and supplies to and from the Space Station aboard the Space Shuttle. Leonardo will be launched March 1, 2001, on Shuttle mission STS-102 On that flight, Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, being carried to the ISS on the Jan. 19, 2001, launch of STS-98.

Relation of DDE and PBB serum levels in farm residents, consumers, and Michigan Chemical Corporation employees.

PubMed Central

Wolff, M S; Aubrey, B; Camper, F; Haymes, N

1978-01-01

Results of serum PBB determinations on 524 Michigan diary farm residents and consumers of products from the farms, 55 chemical workers, and 56 Wisconsin farm residents are reported. Mean and median values were highest for the chemical workers, followed by consumers from and residents of quarantined and nonquarantined farms. Serum DDE was higher among chemical workers, but was similar for all other groups. Statistical analysis of serum of PPB and serum DDE levels was done with respect to quarantine status, age, sex, and obesity. The most significant correlate with PBB was quarantine status. Serum DDE, age, sex, or obesity were not consistently correlated with serum PBB. For DDE, age was invariably the most significant correlate. Both serum PBB and DDE were higher in males than females in husband-wife pairs in most cases, although the differences occurred less frequently among older age groups. These results support the hypothesis that PBB exposure was a recent interim exposure whereas DDE exposure has been cumulative throughout a person's lifetime. Higher PBB and DDE mean concentrations in serum of Michigan Chemical workers suggests an occupational exposure to these chemicals. PMID:209972

Bridging the gap between sample collection and laboratory analysis: using dried blood spots to identify human exposure to chemical agents

NASA Astrophysics Data System (ADS)

Hamelin, Elizabeth I.; Blake, Thomas A.; Perez, Jonas W.; Crow, Brian S.; Shaner, Rebecca L.; Coleman, Rebecca M.; Johnson, Rudolph C.

2016-05-01

Public health response to large scale chemical emergencies presents logistical challenges for sample collection, transport, and analysis. Diagnostic methods used to identify and determine exposure to chemical warfare agents, toxins, and poisons traditionally involve blood collection by phlebotomists, cold transport of biomedical samples, and costly sample preparation techniques. Use of dried blood spots, which consist of dried blood on an FDA-approved substrate, can increase analyte stability, decrease infection hazard for those handling samples, greatly reduce the cost of shipping/storing samples by removing the need for refrigeration and cold chain transportation, and be self-prepared by potentially exposed individuals using a simple finger prick and blood spot compatible paper. Our laboratory has developed clinical assays to detect human exposures to nerve agents through the analysis of specific protein adducts and metabolites, for which a simple extraction from a dried blood spot is sufficient for removing matrix interferents and attaining sensitivities on par with traditional sampling methods. The use of dried blood spots can bridge the gap between the laboratory and the field allowing for large scale sample collection with minimal impact on hospital resources while maintaining sensitivity, specificity, traceability, and quality requirements for both clinical and forensic applications.

[Strategy Development for International Cooperation in the Clinical Laboratory Field].

PubMed

Kudo, Yoshiko; Osawa, Susumu

2015-10-01

The strategy of international cooperation in the clinical laboratory field was analyzed to improve the quality of intervention by reviewing documents from international organizations and the Japanese government. Based on the world development agenda, the target of action for health has shifted from communicable diseases to non-communicable diseases (NCD). This emphasizes the importance of comprehensive clinical laboratories instead of disease-specific examinations in developing countries. To achieve this goal, the World Health Organization (WHO) has disseminated to the African and Asian regions the Laboratory Quality Management System (LQMS), which is based on the same principles of the International Organization of Standardization (ISO) 15189. To execute this strategy, international experts must have competence in project management, analyze information regarding the target country, and develop a strategy for management of the LQMS with an understanding of the technical aspects of laboratory work. However, there is no appropriate pre- and post-educational system of international health for Japanese international workers. Universities and academic organizations should cooperate with the government to establish a system of education for international workers. Objectives of this education system must include: (1) training for the organization and understanding of global health issues, (2) education of the principles regarding comprehensive management of clinical laboratories, and (3) understanding the LQMS which was employed based on WHO's initiative. Achievement of these objectives will help improve the quality of international cooperation in the clinical laboratory field.

Detection of martian amino acids by chemical derivatization coupled to gas chromatography: in situ and laboratory analysis.

PubMed

Rodier, C; Vandenabeele-Trambouze, O; Sternberg, R; Coscia, D; Coll, P; Szopa, C; Raulin, F; Vidal-Madjar, C; Cabane, M; Israel, G; Grenier-Loustalot, M F; Dobrijevic, M; Despois, D

2001-01-01

If there is, or ever was, life in our solar system beyond the Earth, Mars is the most likely place to search for. Future space missions will have then to take into account the detection of prebiotic molecules or molecules of biological significance such as amino acids. Techniques of analysis used for returned samples have to be very sensitive and avoid any chemical or biological contamination whereas in situ techniques have to be automated, fast and low energy consuming. Several possible methods could be used for in situ amino acid analyses on Mars, but gas chromatography would likely be the most suitable. Returned samples could be analyzed by any method in routine laboratory use such as gas chromatography, already successfully performed for analyses of organic matter including amino acids from martian meteorites. The derivatization step, which volatilizes amino acids to perform both in situ and laboratory analysis by gas chromatography, is discussed here. c2001 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

78 FR 70579 - Deluxe Laboratories, Inc., a Division of Deluxe Entertainment Services Group, Inc. Hollywood...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

...., a Division of Deluxe Entertainment Services Group, Inc. Hollywood, California; Notice of Revised... of Deluxe Laboratories, Inc., a division of Deluxe Entertainment Services Group, Inc., Hollywood... workers of Deluxe Laboratories, Inc., a division of Deluxe Entertainment Services Group, Inc., Hollywood...

Gender, airborne chemical monitoring, and physical work environment are related to indoor air symptoms among nonindustrial workers in the Klang Valley, Malaysia

PubMed Central

Syazwan, Aizat Ismail; Hafizan, Juahir; Baharudin, Mohd Rafee; Azman, Ahmad Zaid Fattah; Izwyn, Zulkapri; Zulfadhli, Ismail; Syahidatussyakirah, Katis

2013-01-01

Objectives: The purpose of this study was to analyze the relationship of airborne chemicals and the physical work environment risk element on the indoor air symptoms of nonindustrial workers. Design: A cross-sectional study consisting of 200 office workers. A random selection of 200 buildings was analyzed for exposure and indoor air symptoms based on a pilot study in the Klang Valley, Malaysia. Methods: A set of modified published questionnaires by the Department of Occupational Safety and Health (DOSH), Malaysia and a previous study (MM040NA questionnaire) pertaining to indoor air symptoms was used in the evaluation process of the indoor air symptoms. Statistical analyses involving logistic regression and linear regression were used to determine the relationship between exposure and indoor air symptoms for use in the development of an indoor risk matrix. Results: The results indicate that some indoor air pollutants (carbon monoxide, formaldehyde, total volatile organic compound, and dust) are related to indoor air symptoms of men and women. Temperature and relative humidity showed a positive association with complaints related to the perceived indoor environmental condition (drafts and inconsistency of temperature). Men predominantly reported general symptoms when stratification of gender involved exposure to formaldehyde. Women reported high levels of complaints related to mucosal and general symptoms from exposure to the dust level indoors. Conclusion: Exposure to pollutants (total volatile organic compounds, carbon monoxide, and formaldehyde) and physical stressors (air temperature and relative humidity) influence reported symptoms of office workers. These parameters should be focused upon and graded as one of the important elements in the grading procedure when qualitatively evaluating the indoor environment. PMID:23526736

Topics in Chemical Instrumentation. Robots in the Laboratory--An Overview.

ERIC Educational Resources Information Center

Strimaitis, Janet R.

1990-01-01

Discussed are applications of robotics in the chemistry laboratory. Highlighted are issues of precision, accuracy, and system integration. Emphasized are the potential benefits of the use of robots to automate laboratory procedures. (CW)

Pulmonary functions in plastic factory workers: a preliminary study.

PubMed

Khaliq, Farah; Singh, Pawan; Chandra, Prakash; Gupta, Keshav; Vaney, Neelam

2011-01-01

Exposure to long term air pollution in the work environment may result in decreased lung functions and various other health problems. A significant occupational hazard to lung functions is experienced by plastic factory workers. The present study is planned to assess the pulmonary functions of workers in the plastic factory where recycling of pastic material was done. These workers were constantly exposed to fumes of various chemicals throughout the day. Thirty one workers of plastic factory were assessed for their pulmonary functions. Parameters were compared with 31 age and sex matched controls not exposed to the same environment. The pulmonary function tests were done using Sibelmed Datospir 120 B portable spirometer. A significant decrease in most of the flow rates (MEF 25%, MEF 50%, MEF 75% and FEF 25-75%) and most of the lung volumes and capacities (FVC, FEV1, VC, TV, ERV, MVV) were observed in the workers. Smoking and duration of exposure were not affecting the lung functions as the non smokers also showed a similar decrement in pulmonary functions. Similarly the workers working for less than 5 years also had decrement in pulmonary functions indicating that their lungs are being affected even if they have worked for one year. Exposure to the organic dust in the work environment should be controlled by adequate engineering measures, complemented by effective personal respiratory protection.

Guide for Science Laboratory Safety.

ERIC Educational Resources Information Center

McDermott, John J.

General and specific safety procedures and recommendations for secondary school science laboratories are provided in this guide. Areas of concern include: (1) chemicals (storage, disposal, toxicity, unstable and incompatible chemicals); (2) microorganisms; (3) plants; (4) animals; (5) electricity; (6) lasers; (7) rockets; (8) eye safety and…

Decreased Serum Free Testosterone in Workers Exposed to High Levels of Di-n-butyl Phthalate (DBP) and Di-2-ethylhexyl Phthalate (DEHP): A Cross-Sectional Study in China

PubMed Central

Pan, Guowei; Hanaoka, Tomoyuki; Yoshimura, Mariko; Zhang, Shujuan; Wang, Ping; Tsukino, Hiromasa; Inoue, Koichi; Nakazawa, Hiroyuki; Tsugane, Shoichiro; Takahashi, Ken

2006-01-01

Background Observations of adverse developmental and reproductive effects in laboratory animals and wildlife have fueled increasing public concern regarding the potential for various chemicals to impair human fertility. Objective Our objective in this study was to assess the effect of occupational exposure to high levels of phthalate esters on the balance of gonadotropin and gonadal hormones including luteinizing hormone, follicle-stimulating hormone, free testosterone (fT), and estradiol. Methods We examined urine and blood samples of 74 male workers at a factory producing unfoamed polyvinyl chloride flooring exposed to di-n-butyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP) and compared them with samples from 63 male workers from a construction company, group matched for age and smoking status. Results Compared to the unexposed workers, the exposed workers had substantially and significantly elevated concentrations of mono-n-butyl phthalate (MBP; 644.3 vs. 129.6 μg/g creatinine, p < 0.001) and mono-2-ethylhexyl phthalate (MEHP; 565.7 vs. 5.7 μg/g creatinine, p < 0.001). fT was significantly lower (8.4 vs. 9.7 μg/g creatinine, p = 0.019) in exposed workers than in unexposed workers. fT was negatively correlated to MBP (r = −0.25, p = 0.03) and MEHP (r = −0.19, p = 0.095) in the exposed worker group. Regression analyses revealed that fT decreases significantly with increasing total phthalate ester score (the sum of quartiles of MBP and MEHP; r = −0.26, p = 0.002). Conclusion We observed a modest and significant reduction of serum fT in workers with higher levels of urinary MBP and MEHP compared with unexposed workers. PMID:17107847

Occupation and industry on death certificates of long-term chemical workers: concordance with work history records.

PubMed

Olsen, G W; Brondum, J; Bodner, K M; Kravat, B A; Mandel, J S; Mandel, J H; Bond, G G

1990-01-01

This study evaluated the concordance between occupation and industry listed on death certificates with actual work history information for a group (n = 5,882) of long-term (10 years or more) workers at a chemical company. Match rates were calculated as the percent of death certificate occupation and company entries that were confirmed by work history data using 3-digit 1980 U.S. Census Bureau group codes. The concordance rate for industry differed by employment status at death: employed, 94.9%; inactive, 30.8%; and retired, 91.1%. Concordance on occupation was analyzed for employed (n = 467) and retired (n = 932) subjects who had computerized work histories (randomly done prior to the study) and who had matched on the company on the death certificate. Concordance ranged from 0 to 50% for the first job, to 50 to 70% for the last job, longest job, and longest job in the last 10 years of company employment. The most consistent predictor of concordance was job duration. Misclassification was reviewed by occupational category. Results from this and other investigations lead to the inevitable conclusion that usual occupation data from death certificates are grossly inadequate for studies of occupational risks.

A&M. TAN607. Special equipment services room. Workers are filling viewing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Special equipment services room. Workers are filling viewing window with zinc bromide through tube penetrating concrete shield wall. Date: August 16, 1954. INEEL negative no. 11689 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

For Debate: Impotence in Farm Workers using Toxic Chemicals

PubMed Central

Espir, Michael L. E.; Hall, J. W.; Shirreffs, J. G.; Stevens, David L.

1970-01-01

Four out of five members of a team of farmworkers who had been using various herbicides and pesticides in intensive agriculture became impotent. Sexual function recovered after further contact with the chemicals was stopped and hormone therapy had been given, though in one case this took about a year. We have not been able to incriminate one particular substance, but with the circumstantial evidence and the lack of any other obvious cause it seems likely that the impotence was due to the toxic effects of one or more of the chemicals being used. PMID:5434665

Specific recognition of reproductive parasite workers by nest-entrance guards in the bumble bee Bombus terrestris.

PubMed

Blacher, Pierre; Boreggio, Laurie; Leroy, Chloé; Devienne, Paul; Châline, Nicolas; Chameron, Stéphane

2013-12-10

The impact of social parasites on their hosts' fitness is a strong selective pressure that can lead to the evolution of adapted defence strategies. Guarding the nest to prevent the intrusion of parasites is a widespread response of host species. If absolute rejection of strangers provides the best protection against parasites, more fine-tuned strategies can prove more adaptive. Guarding is indeed costly and not all strangers constitute a real threat. That is particularly true for worker reproductive parasitism in social insects since only a fraction of non-nestmate visitors, the fertile ones, can readily engage in parasitic reproduction. Guards should thus be more restrictive towards fertile than sterile non-nestmate workers. We here tested this hypothesis by examining the reaction of nest-entrance guards towards nestmate and non-nestmate workers with varying fertility levels in the bumble bee Bombus terrestris. Because social recognition in social insects mainly relies on cuticular lipids (CLs), chemical analysis was also conducted to examine whether workers' CLs could convey the relevant information upon which guards could base their decision. We thus aimed to determine whether an adapted defensive strategy to worker reproductive parasitism has evolved in B. terrestris colonies. Chemical analysis revealed that the cuticular chemical profiles of workers encode information about both their colony membership and their current fertility, therefore providing potential recognition cues for a suitable adjustment of the guards' defensive decisions. We found that guards were similarly tolerant towards sterile non-nestmate workers than towards nestmate workers. However, as predicted, guards responded more aggressively towards fertile non-nestmates. Our results show that B. terrestris guards discriminate non-nestmates that differ in their reproductive potential and respond more strongly to the individuals that are a greatest threat for the colony. Cuticular hydrocarbons are

Cardiotoxicity of Freon among refrigeration services workers: comparative cross-sectional study

PubMed Central

2009-01-01

Background Freon includes a number of gaseous, colorless chlorofluorocarbons. Although freon is generally considered to be a fluorocarbon of relatively low toxicity; significantly detrimental effects may occur upon over exposure. The purpose of the present study is to investigate whether occupational exposure to fluorocarbons can induce arterial hypertension, myocardial ischemia, cardiac arrhythmias, elevated levels of plasma lipids and renal dysfunction. Methods This comparative cross-sectional study was conducted at the cardiology clinic of the Suez Canal Authority Hospital (Egypt). The study included 23 apparently healthy male workers at the refrigeration services workshop who were exposed to fluorocarbons (FC 12 and FC 22) and 23 likewise apparently healthy male workers (unexposed), the control group. All the participants were interviewed using a pre-composed questionnaire and were subjected to a clinical examination and relevant laboratory investigations. Results There were no significant statistical differences between the groups studied regarding symptoms suggesting arterial hypertension and renal affection, although a significantly higher percentage of the studied refrigeration services workers had symptoms of arrhythmias. None of the workers had symptoms suggesting coronary artery disease. Clinical examination revealed that the refrigeration services workers had a significantly higher mean pulse rate compared to the controls, though no significant statistical differences were found in arterial blood pressure measurements between the two study groups. Exercise stress testing of the workers studied revealed normal heart reaction to the increased need for oxygen, while sinus tachycardia was detected in all the participants. The results of Holter monitoring revealed significant differences within subject and group regarding the number of abnormal beats detected throughout the day of monitoring (p < 0.001). There were no significant differences detected in the

State-wide hospital clinical laboratory plan for measuring cholinesterase activity for individuals suspected of exposure to nerve agent chemical weapons.

PubMed

Wu, Alan H B; Smith, Andrew; McComb, Robert; Bowers, George N; Makowski, Gregory S; McKay, Charles A; Vena, Jason; McDonagh, John; Hopfer, Sidney; Sena, Salvatore F; Malkus, Herbert; Forte, Elaine; Kelly, Katherine

2008-02-01

Hospital laboratories currently lack the capacity to provide emergency determination of cholinesterase activity. We have developed a hospital-based 3-tiered system to test plasma for butyrylcholinesterase (BChE) activity and whole blood for red cell acetylcholinesterase (AChE) activity using available technology and personnel. Interagency communications, toxidrome definition, and patient triage will be coordinated by the Connecticut Department of Public Health and the Poison Control Center. Initial BChE data documents good precision between institutions (coefficient of variation < 8%). Laboratory testing of plasma or blood for cholinesterase activity is important in the management of nerve agent exposure and in ruling out disease in those with non-specific symptoms in the setting of a terrorist attack or accidental exposure. Rapid availability of strong hospital-based analytic support in a smoothly functioning network of clinical, public health, and laboratory services will facilitate overall regional response to chemical terrorism or large scale HazMat events.

Levels of CEA among vinyl chloride and polyvinyl chloride exposed workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, H.A.; Snyder, J.; Lewinson, T.

1978-09-01

In 1974, vinyl chloride exposed workers were found to have an increased risk of malignant disease (hemangiosarcoma of the liver). We have examined 1,147 workers exposed to vinyl chloride monomer in three VC/PVC polymerization plants, and 269 workers from a PVC extrusion plant manufacturing PVC textile leather, exposed to much lower concentrations of vinyl chloride. Included among the comprehensive clinical and laboratory studies conducted was the CEA titer. We obtained, respectively, 1,115 and 248 CEA titers. Multiple factors were demonstrated which affected the distribution of CEA titers. Cigarette use had the greatest effect, followed by history of specific past illnessesmore » and alcohol intake history. After removing these possible confounding effects, the distribution of CEA titers among the polymerization workers was significantly different from the extrusion plant group and from an unexposed comparison group. Of the six job categories analyzed, only production and maintenance workers had CEA titer distributions significantly different from the comparison group and the extrusion workers. The investigation demonstrates that occupational exposures in VC/PVC polymerization plants can cause elevations in the CEA titers of otherwise healthy individuals. Prospective follow-up is necessary before conclusions can be drawn concerning the usefulness of the CEA titer as a predictive indicator of possible increased risk.« less

[Features of dyslipidemia development and insulin resistance in female workers engaged in methanol and formaldehyde production].

PubMed

Taranenko, L A

2013-01-01

The article covers data on analyzing occupational risk of carbohydrate and lipid metabolism in female workers exosed to methanol and formaldehyde. Findings are that increased contents of the studied chemicals in the air of workplace cause more probable dyslipidemia, insuline resistence in peri-menopausal female workers, these disorders have reliable correlation with occupation.

[What do we know about chemical hazards in offshore work?].

PubMed

Moen, Bente E; Steinsvåg, Kjersti; Bråveit, Magne

2004-10-21

Norway has been an oil-producing nation for more than thirty years and a large number of Norwegians have been or are working on oil rigs. There are several chemical substances present on the oil platforms, and these factors may influence workers' health. The international literature on offshore chemical exposure and health is summarised. The most important groups of chemical substances used on oil rigs are described: crude oil, production chemicals, asbestos and drilling chemicals. Different types of exposure during maintenance work are described as well. Very few exposure data are published. Acute, irritative health effects from chemical exposure are described, as well as chronic health effects like skin disorders and cancer. These workers seem to have a higher risk, that may be related to benzene exposure, of developing acute myelogenous leukemia. Physicians who are treating patients working in the oil industry are advised to be aware of possible adverse health effects from the work environment on the rigs. Further exposure studies and research in this area are highly recommended, as the literature is scarce.

Health survey and assessment of the polymorphisms BRCA1/P871L, BRCA1/Q356R, and BRCA2/N372H in female gas station workers in Rio de Janeiro.

PubMed

Silvestre, Rafaele T; Delmonico, Lucas; Bravo, Maryah; Santiago, Fábio; Scherrer, Luciano R; Moreira, Aline Dos Santos; Tabalipa, Marianne; Otero, Ubirani; Ornellas, Maria Helena F; Alves, Gilda

2017-12-01

Gas station workers are exposed to chemicals known to be carcinogenic, especially benzene. The objective was to analyze the health problems of female gas station workers by means of sociodemographic and clinical questionnaires, and laboratorial exams. We performed the genotyping of the polymorphisms BRCA1/P871L and BRCA1/Q356R by Polymerase Chain Reaction-Restriction Fragment Length Polymorphism, and of variant allele BRCA2/N372H through direct sequencing. The female workers showed a higher concentration of monocytes (P = 0.039); a greater number of spontaneous abortions (P = 0.025, OR = 4.977, 95% CI = 1.135-30.669); higher tobacco consumption (P = 0.013); and higher alcohol consumption (P = 0.05). The statistical analysis of the polymorphisms associated with the variables monocyte concentration and miscarriage number did not reveal a significant relationship, and smoking and spontaneous abortion were not statistically associated either. Environ. Mol. Mutagen. 58:730-734, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

The relationship between spontaneous abortion and female workers in the semiconductor industry.

PubMed

Kim, Heechan; Kwon, Ho-Jang; Rhie, Jeongbae; Lim, Sinye; Kang, Yun-Dan; Eom, Sang-Yong; Lim, Hyungryul; Myong, Jun-Pyo; Roh, Sangchul

2017-01-01

This study investigated the relationship between job type and the risk for spontaneous abortion to assess the reproductive toxicity of female workers in the semiconductor industry. A questionnaire survey was administered to current female workers of two semiconductor manufacturing plants in Korea. We included female workers who became pregnant at least 6 months after the start of their employment with the company. The pregnancy outcomes of 2,242 female workers who experienced 4,037 pregnancies were investigated. Personnel records were used to assign the subjects to one of three groups: fabrication process workers, packaging process workers, and clerical workers. To adjust for within-person correlations between pregnancies, a generalized estimating equation was used. The logistic regression analysis was limited to the first pregnancy after joining the company to satisfy the assumption of independence among pregnancies. Moreover, we stratified the analysis by time period (pregnancy in the years prior to 2008 vs. after 2009) to reflect differences in occupational exposure based on semiconductor production periods. The risk for spontaneous abortion in female semiconductor workers was not significantly higher for fabrication and packaging process workers than for clerical workers. However, when we stratified by time period, the odds ratio for spontaneous abortion was significantly higher for packaging process workers who became pregnant prior to 2008 when compared with clerical workers (odds ratio: 2.21; 95% confidence interval: 1.01-4.81). When examining the pregnancies of female semiconductor workers that occurred prior to 2008, packaging process workers showed a significantly higher risk for spontaneous abortions than did clerical workers. The two semiconductor production periods in our study (prior to 2008 vs. after 2009) had different automated processes, chemical exposure levels, and working environments. Thus, the conditions prior to 2008 may have increased the

Cross-Sectional Study of Respiratory Symptoms, Spirometry, and Immunologic Sensitivity in Epoxy Resin Workers.

PubMed

Hines, Stella E; Barker, Elizabeth A; Robinson, Maura; Knight, Vijaya; Gaitens, Joanna; Sills, Michael; Duvall, Kirby; Rose, Cecile S

2015-12-01

An epoxy resin worker developed hypersensitivity pneumonitis requiring lung transplantation and had an abnormal blood lymphocyte proliferation test (LPT) to an epoxy hardener. We assessed the prevalence of symptoms, abnormal spirometry, and abnormal epoxy resin LPT results in epoxy resin workers compared to unexposed workers. Participants completed questionnaires and underwent spirometry. We collected blood for epoxy resin LPT and calculated stimulation indices for five epoxy resin products. We compared 38 exposed to 32 unexposed workers. Higher exposed workers were more likely to report cough (OR 10.86, [1.23-infinity], p = 0.030) or wheeze (OR 4.44, [1.00-22.25], p = 0.049) than unexposed workers, even controlling for smoking. Higher exposed workers were more likely to have abnormal FEV1 than unexposed workers (OR 10.51, [0.86-589.9], p = 0.071), although not statistically significant when adjusted for smoking. There were no differences in proportion of abnormal epoxy resin system LPTs between exposed and unexposed workers. In summary, workers exposed to epoxy resin system chemicals were more likely to report respiratory symptoms and have abnormal FEV1 than unexposed workers. Use of epoxy resin LPT was not helpful as a biomarker of exposure and sensitization. © 2015 Wiley Periodicals, Inc.

Cross‐Sectional Study of Respiratory Symptoms, Spirometry, and Immunologic Sensitivity in Epoxy Resin Workers

PubMed Central

Barker, Elizabeth A.; Robinson, Maura; Knight, Vijaya; Gaitens, Joanna; Sills, Michael; Duvall, Kirby; Rose, Cecile S.

2015-01-01

Abstract Objectives An epoxy resin worker developed hypersensitivity pneumonitis requiring lung transplantation and had an abnormal blood lymphocyte proliferation test (LPT) to an epoxy hardener. We assessed the prevalence of symptoms, abnormal spirometry, and abnormal epoxy resin LPT results in epoxy resin workers compared to unexposed workers. Methods Participants completed questionnaires and underwent spirometry. We collected blood for epoxy resin LPT and calculated stimulation indices for five epoxy resin products. Results We compared 38 exposed to 32 unexposed workers. Higher exposed workers were more likely to report cough (OR 10.86, [1.23‐infinity], p = 0.030) or wheeze (OR 4.44, [1.00‐22.25], p = 0.049) than unexposed workers, even controlling for smoking. Higher exposed workers were more likely to have abnormal FEV1 than unexposed workers (OR 10.51, [0.86‐589.9], p = 0.071), although not statistically significant when adjusted for smoking. There were no differences in proportion of abnormal epoxy resin system LPTs between exposed and unexposed workers. Conclusions In summary, workers exposed to epoxy resin system chemicals were more likely to report respiratory symptoms and have abnormal FEV1 than unexposed workers. Use of epoxy resin LPT was not helpful as a biomarker of exposure and sensitization. PMID:26553118

NIOSH health and safety practices survey of healthcare workers: training and awareness of employer safety procedures.

PubMed

Steege, Andrea L; Boiano, James M; Sweeney, Marie H

2014-06-01

The Health and Safety Practices Survey of Healthcare Workers describes current practices used to minimize chemical exposures and barriers to using recommended personal protective equipment for the following: antineoplastic drugs, anesthetic gases, high level disinfectants, surgical smoke, aerosolized medications (pentamidine, ribavirin, and antibiotics), and chemical sterilants. Twenty-one healthcare professional practice organizations collaborated with NIOSH to develop and implement the web-based survey. Twelve thousand twenty-eight respondents included professional, technical, and support occupations which routinely come in contact with the targeted hazardous chemicals. Chemical-specific safe handling training was lowest for aerosolized antibiotics (52%, n = 316), and surgical smoke (57%, n = 4,747). Reported employer procedures for minimizing exposure was lowest for surgical smoke (32%, n = 4,746) and anesthetic gases (56%, n = 3,604). Training and having procedures in place to minimize exposure to these chemicals is one indication of employer and worker safety awareness. Safe handling practices for use of these chemicals will be reported in subsequent papers. © 2014 Wiley Periodicals, Inc.

Adsorption laboratory experiment for undergraduate chemical engineering: Introducing kinetic, equilibrium and thermodynamic concepts

NASA Astrophysics Data System (ADS)

Muryanto, S.; Djatmiko Hadi, S.

2016-11-01

Adsorption laboratory experiment for undergraduate chemical engineering program is discussed. The experiment demonstrated adsorption of copper ions commonly found in wastewater using bio-sorbent, i.e. agricultural wastes. The adsorption was performed in a batch mode under various parameters: adsorption time (up to 120 min), initial pH (2 to 6), adsorbent dose (2.0 to 12.0 g L-1), adsorbent size (50 to 170 mesh), initial Cu2+ concentration (25 to 100 ppm) and temperatures (room temp to 40°C). The equilibrium and kinetic data of the experiments were calculated using the two commonly used isotherms: Langmuir and Lagergren pseudo-first-order kinetics. The maximum adsorption capacity for Cu2+ was found as 94.34 mg g-1. Thermodynamically, the adsorption process was spontaneous and endothermic. The calculated activation energy for the adsorption was observed as high as 127.94 kJ mol-1. Pedagogically, the experiment was assumed to be important in increasing student understanding of kinetic, equilibrium and thermodynamic concepts.

Viability testing of material derived from Mycobacterium tuberculosis prior to removal from a Containment Level-III Laboratory as part of a Laboratory Risk Assessment Program

PubMed Central

Blackwood, Kym S; Burdz, Tamara V; Turenne, Christine Y; Sharma, Meenu K; Kabani, Amin M; Wolfe, Joyce N

2005-01-01

Background In the field of clinical mycobacteriology, Mycobacterium tuberculosis (MTB) can be a difficult organism to manipulate due to the restrictive environment of a containment level 3 (CL3) laboratory. Tests for rapid diagnostic work involving smears and molecular methods do not require CL3 practices after the organism has been rendered non-viable. While it has been assumed that after organism deactivation these techniques can be performed outside of a CL3, no conclusive study has consistently confirmed that the organisms are noninfectious after the theoretical 'deactivation' steps. Previous studies have shown that initial steps (such as heating /chemical fixation) may not consistently kill MTB organisms. Methods An inclusive viability study (n = 226) was undertaken to determine at which point handling of culture extraction materials does not necessitate a CL3 environment. Four different laboratory protocols tested for viability included: standard DNA extractions for IS6110 fingerprinting, crude DNA preparations for PCR by boiling and mechanical lysis, protein extractions, and smear preparations. For each protocol, laboratory staff planted a proportion of the resulting material to Bactec 12B medium that was observed for growth for 8 weeks. Results Of the 208 isolates initially tested, 21 samples grew within the 8-week period. Sixteen (7.7%) of these yielded positive results for MTB that included samples of: deactivated culture resuspensions exposed to 80°C for 20 minutes, smear preparations and protein extractions. Test procedures were consequently modified and tested again (n = 18), resulting in 0% viability. Conclusions This study demonstrates that it cannot be assumed that conventional practices (i.e. smear preparation) or extraction techniques render the organism non-viable. All methodologies, new and existing, should be examined by individual laboratories to validate the safe removal of material derived from MTB to the outside of a CL3 laboratory. This

Viability testing of material derived from Mycobacterium tuberculosis prior to removal from a containment level-III laboratory as part of a Laboratory Risk Assessment Program.

PubMed

Blackwood, Kym S; Burdz, Tamara V; Turenne, Christine Y; Sharma, Meenu K; Kabani, Amin M; Wolfe, Joyce N

2005-01-24

In the field of clinical mycobacteriology, Mycobacterium tuberculosis (MTB) can be a difficult organism to manipulate due to the restrictive environment of a containment level 3 (CL3) laboratory. Tests for rapid diagnostic work involving smears and molecular methods do not require CL3 practices after the organism has been rendered non-viable. While it has been assumed that after organism deactivation these techniques can be performed outside of a CL3, no conclusive study has consistently confirmed that the organisms are noninfectious after the theoretical 'deactivation' steps. Previous studies have shown that initial steps (such as heating/chemical fixation) may not consistently kill MTB organisms. An inclusive viability study (n = 226) was undertaken to determine at which point handling of culture extraction materials does not necessitate a CL3 environment. Four different laboratory protocols tested for viability included: standard DNA extractions for IS6110 fingerprinting, crude DNA preparations for PCR by boiling and mechanical lysis, protein extractions, and smear preparations. For each protocol, laboratory staff planted a proportion of the resulting material to Bactec 12B medium that was observed for growth for 8 weeks. Of the 208 isolates initially tested, 21 samples grew within the 8-week period. Sixteen (7.7%) of these yielded positive results for MTB that included samples of: deactivated culture resuspensions exposed to 80 degrees C for 20 minutes, smear preparations and protein extractions. Test procedures were consequently modified and tested again (n = 18), resulting in 0% viability. This study demonstrates that it cannot be assumed that conventional practices (i.e. smear preparation) or extraction techniques render the organism non-viable. All methodologies, new and existing, should be examined by individual laboratories to validate the safe removal of material derived from MTB to the outside of a CL3 laboratory. This process is vital to establish in

[Pressing problems of labor hygiene and occupational pathology among office workers].

PubMed

Dudarev, A A; Sorokin, G A

2012-01-01

Northwest public health research center, Ministry of health and social affairs, St.-Petersburg. The article substantiates the conception of "office room", "office worker", estimates the basic diseases and symptoms among office workers (SBS-syndrome, BRI-illnesses, BRS-symptoms). Complex of indoor factors of office environment are analyzed, which influence the health status of personnel--indoor air quality (microclimate, aerosols, chemical, biological pollution, air ionization), external physical factors, ergonomics, intensity and tension of work, psychosocial factors. Comparison of Russian and foreign approaches to the hygienic estimation and rating of these factors was carried out. Owing to inadequacy of Russian hygienic rules to modern requirements, the necessity of working out of a complex of sanitary rules focused particularly on office workers is proved.

Green Jobs: Definition and Method of Appraisal of Chemical and Biological Risks

PubMed Central

Cheneval, Erwan; Busque, Marc-Antoine; Ostiguy, Claude; Lavoie, Jacques; Bourbonnais, Robert; Labrèche, France; Bakhiyi, Bouchra; Zayed, Joseph

2016-01-01

In the wake of sustainable development, green jobs are developing rapidly, changing the work environment. However a green job is not automatically a safe job. The aim of the study was to define green jobs, and to establish a preliminary risk assessment of chemical substances and biological agents for workers in Quebec. An operational definition was developed, along with criteria and sustainable development principles to discriminate green jobs from regular jobs. The potential toxicity or hazard associated with their chemical and biological exposures was assessed, and the workers’ exposure appraised using an expert assessment method. A control banding approach was then used to assess risks for workers in selected green jobs. A double entry model allowed us to set priorities in terms of chemical or biological risk. Among jobs that present the highest risk potential, several are related to waste management. The developed method is flexible and could be adapted to better appraise the risks that workers are facing or to propose control measures. PMID:26718400

Relation between sick leave and selected exposure variables among women semiconductor workers in Malaysia

PubMed Central

Chee, H; Rampal, K

2003-01-01

Aims: To determine the relation between sick leave and selected exposure variables among women semiconductor workers. Methods: This was a cross sectional survey of production workers from 18 semiconductor factories. Those selected had to be women, direct production operators up to the level of line leader, and Malaysian citizens. Sick leave and exposure to physical and chemical hazards were determined by self reporting. Three sick leave variables were used; number of sick leave days taken in the past year was the variable of interest in logistic regression models where the effects of age, marital status, work task, work schedule, work section, and duration of work in factory and work section were also explored. Results: Marital status was strongly linked to the taking of sick leave. Age, work schedule, and duration of work in the factory were significant confounders only in certain cases. After adjusting for these confounders, chemical and physical exposures, with the exception of poor ventilation and smelling chemicals, showed no significant relation to the taking of sick leave within the past year. Work section was a good predictor for taking sick leave, as wafer polishing workers faced higher odds of taking sick leave for each of the three cut off points of seven days, three days, and not at all, while parts assembly workers also faced significantly higher odds of taking sick leave. Conclusion: In Malaysia, the wafer fabrication factories only carry out a limited portion of the work processes, in particular, wafer polishing and the processes immediately prior to and following it. This study, in showing higher illness rates for workers in wafer polishing compared to semiconductor assembly, has implications for the governmental policy of encouraging the setting up of wafer fabrication plants with the full range of work processes. PMID:12660374

Laboratory measurements. [chemical and photochemical data relative to stratospheric modeling

NASA Technical Reports Server (NTRS)

1977-01-01

A compilation of chemical and photochemical data that are relevant to stratospheric modeling is presented. There are three broad categories of data: (1) rate constants for chemical reactions, including temperature and pressure dependencies along with product distributions; (2) absorption cross sections, photodissociation quantum yield, and photolysis; (3) heterogeneous chemical processes.

17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING GALLERY USING MANIPULATOR ARMS AT STATION E-108. Photographer unknown, ca. 1965, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

Older Workers' Perspectives on Training and Retention of Older Workers: Victorian Aged Care Workers Survey. Support Document

ERIC Educational Resources Information Center

Lundberg, David; Marshallsay, Zariah

2007-01-01

Older workers' perspectives are examined in a national survey of the finance sector and case studies of aged care and construction workers. The majority of older workers intend to work beyond retirement age, to achieve a better lifestyle. With training, older workers could mentor younger workers. This support document includes a national survey of…

Chemical Waste Management and Disposal.

ERIC Educational Resources Information Center

Armour, Margaret-Ann

1988-01-01

Describes simple, efficient techniques for treating hazardous chemicals so that nontoxic and nonhazardous residues are formed. Discusses general rules for management of waste chemicals from school laboratories and general techniques for the disposal of waste or surplus chemicals. Lists specific disposal reactions. (CW)

Liver disease among polyvinyl chloride production workers.

PubMed

Creech, J L; Makk, L

1975-01-31

A protocol for systematic testing of all employees of a chemical plant is presented. This factory manufactures polyvinyl chloride compounds and resins, ABS compounds and resins, and synthetic rubber. The results were reviewed, which led to the discovery of 2 additional cases of angiosarcoma and 11 cases of portal fibrosis. Two of the 11 cases were found to have developed in employees other than polyvinyl chloride production workers.

A Laboratory Safety Program at Delaware.

ERIC Educational Resources Information Center

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

Training Ghanaian frontline healthcare workers in public health surveillance and disease outbreak investigation and response

PubMed Central

Ameme, Donne Kofi; Nyarko, Kofi Mensah; Afari, Edwin Andrews; Antara, Simon; Sackey, Samuel Oko; Wurapa, Fred

2016-01-01

Introduction Beyond initial formal academic education, the need for continuous professional development through in-service workforce capacity improvement programs that are aimed at enhancing knowledge and skills of public healthcare workers has assumed immense priority worldwide. This has been heightened by the on-going Ebola Virus Disease outbreak, which is exposing the weak public health systems in West Africa. In response to this need, the Ghana Field Epidemiology and Laboratory Program organized a short-course for frontline health workers in the Greater Accra region of Ghana in order to augment their surveillance and outbreak response capacity. Methods Human and veterinary health workers were trained using Field Epidemiology and Laboratory Training Program short course model. A two-week didactic course was conducted with a 10-week field placement. Evaluation of the course was done by assessment of participants’ outputs during the training as well as pretest and posttest methods. Results A total of 32 frontline health workers from both the human and veterinary health services benefited from the two-week initial training of the 12-week course. There was a significant gain in knowledge by the participants after the training course. Participants developed concept papers and implemented their fieldwork projects. Overall assessment of the workshop by the participants was very good. Conclusion Capacity of the health workers has been improved in the area of public health surveillance, outbreak investigation and response. We recommend a scale-up of this training course to other regions. PMID:28149433

Health status of copper refinery workers with specific reference to selenium exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holness, D.L.; Taraschuk, I.G.; Nethercott, J.R.

1989-09-01

Copper refinery workers exposed to selenium were studied before, during, and after a shutdown period. Urine selenium levels were 83 {plus minus} 30 mumol/mol creatinine and 69 {plus minus} 27 mumol/mol creatinine when measured on two occasions during exposure compared with 56 {plus minus} 17 mumol/mol creatinine when the workers had been free of exposure for 10 wk during a shutdown. The refinery workers reported more nose and eye irritation, indigestion, stomach pain, and fatigue than controls. Garlic-like breath odor was reported to be personally and socially offensive by many of the workers. Reporting of symptoms, pulmonary function indices, andmore » laboratory test results did not change with exposure except for hemoglobin level, which rose during the shutdown. Hemoglobin levels were found to be inversely correlated with the urine selenium level, and there was a positive correlation noted for the interactive effect of urine selenium and urine arsenic levels on hemoglobin.49 references.« less

Estimating the number of unvaccinated Chinese workers against yellow fever in Angola.

PubMed

Wilder-Smith, A; Massad, E

2018-04-17

A yellow fever epidemic occurred in Angola in 2016 with 884 laboratory confirmed cases and 373 deaths. Eleven unvaccinated Chinese nationals working in Angola were also infected and imported the disease to China, thereby presenting the first importation of yellow fever into Asia. In Angola, there are about 259,000 Chinese foreign workers. The fact that 11 unvaccinated Chinese workers acquired yellow fever suggests that many more Chinese workers in Angola were not vaccinated. We applied a previously developed model to back-calculate the number of unvaccinated Chinese workers in Angola in order to determine the extent of lack of vaccine coverage. Our models suggest that none of the 259,000 Chinese had been vaccinated, although yellow fever vaccination is mandated by the International Health Regulations. Governments around the world including China need to ensure that their citizens obtain YF vaccination when traveling to countries where such vaccines are required in order to prevent the international spread of yellow fever.

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

46 CFR 189.25-47 - Chemical and explosive hazards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Chemical and explosive hazards. 189.25-47 Section 189.25... INSPECTION AND CERTIFICATION Inspection for Certification § 189.25-47 Chemical and explosive hazards. (a) The marine inspector shall inspect every chemistry laboratory, scientific laboratory, and chemical storeroom...

Greek alchemists at work: 'alchemical laboratory' in the Greco-Roman Egypt.

PubMed

Martelli, Matteo

2011-01-01

The paper focuses on the alchemical laboratory of ancient Greco-Egyptian alchemists, by taking into account especially the earliest alchemical texts (both in the Greek and in the Syriac tradition), ascribed to Pseudo-Democritus, Maria the Jewish and Zosimus. The first part analyzes the possible relationships between the workshops of Egyptian craftsmen (first of all, dyers, metals workers and glass workers) and the activity of the alchemists. The second part gives a general overview on the alchemical instruments described in the Corpus alchemicum.

Subjective Health Complaints Among Workers in the Aftermath of an Oil Tank Explosion.

PubMed

Tjalvin, Gro; Hollund, Bjørg Eli; Lygre, Stein Håkon Låstad; Moen, Bente Elisabeth; Bråtveit, Magne

2015-01-01

The aim of the study was to assess whether exposed workers had more subjective health complaints than controls 1 1/2 years after a chemical explosion involving a mixture of hydrocarbons and sulfurous compounds. A cross-sectional survey based on the Subjective Health Complaints Inventory (SHC) was conducted among 147 exposed workers and 137 controls. A significantly higher total SCH score (linear regression, p=.01) was found for the exposed workers compared with controls when adjusting for gender, age, smoking habits, and educational level. The exposed workers reported significantly more headache, hot flashes, sleep problems, tiredness, dizziness, and sadness/depression. The cause of these complaints is unknown, but health personnel should be aware that health complaints might be related to polluting episodes even when exposure levels are below occupational guideline levels.

Analysis of chemical concepts as the basic of virtual laboratory development and process science skills in solubility and solubility product subject

NASA Astrophysics Data System (ADS)

Syafrina, R.; Rohman, I.; Yuliani, G.

2018-05-01

This study aims to analyze the concept characteristics of solubility and solubility products that will serve as the basis for the development of virtual laboratory and students' science process skills. Characteristics of the analyzed concepts include concept definitions, concept attributes, and types of concepts. The concept analysis method uses concept analysis according to Herron. The results of the concept analysis show that there are twelve chemical concepts that become the prerequisite concept before studying the solubility and solubility and five core concepts that students must understand in the solubility and Solubility product. As many as 58.3% of the definitions of the concepts contained in high school textbooks support students' science process skills, the rest of the definition of the concept is memorized. Concept attributes that meet three levels of chemical representation and can be poured into a virtual laboratory have a percentage of 66.6%. Type of concept, 83.3% is a concept based on principle; and 16.6% concepts that state the process. Meanwhile, the science process skills that can be developed based on concept analysis are the ability to observe, calculate, measure, predict, interpret, hypothesize, apply, classify, and inference.

Safety in the Chemical Laboratory: Fire Safety and Fire Control in the Chemistry Laboratory.

ERIC Educational Resources Information Center

Wilbraham, A. C.

1979-01-01

Discusses fire safety and fire control in the chemistry laboratory. The combustion process, extinguishing equipment, extinguisher maintenance and location, and fire safety and practices are included. (HM)

Who needs 'lazy' workers? Inactive workers act as a 'reserve' labor force replacing active workers, but inactive workers are not replaced when they are removed.

PubMed

Charbonneau, Daniel; Sasaki, Takao; Dornhaus, Anna

2017-01-01

Social insect colonies are highly successful, self-organized complex systems. Surprisingly however, most social insect colonies contain large numbers of highly inactive workers. Although this may seem inefficient, it may be that inactive workers actually contribute to colony function. Indeed, the most commonly proposed explanation for inactive workers is that they form a 'reserve' labor force that becomes active when needed, thus helping mitigate the effects of colony workload fluctuations or worker loss. Thus, it may be that inactive workers facilitate colony flexibility and resilience. However, this idea has not been empirically confirmed. Here we test whether colonies of Temnothorax rugatulus ants replace highly active (spending large proportions of time on specific tasks) or highly inactive (spending large proportions of time completely immobile) workers when they are experimentally removed. We show that colonies maintained pre-removal activity levels even after active workers were removed, and that previously inactive workers became active subsequent to the removal of active workers. Conversely, when inactive workers were removed, inactivity levels decreased and remained lower post-removal. Thus, colonies seem to have mechanisms for maintaining a certain number of active workers, but not a set number of inactive workers. The rapid replacement (within 1 week) of active workers suggests that the tasks they perform, mainly foraging and brood care, are necessary for colony function on short timescales. Conversely, the lack of replacement of inactive workers even 2 weeks after their removal suggests that any potential functions they have, including being a 'reserve', are less important, or auxiliary, and do not need immediate recovery. Thus, inactive workers act as a reserve labor force and may still play a role as food stores for the colony, but a role in facilitating colony-wide communication is unlikely. Our results are consistent with the often cited, but never

46 CFR 194.15-15 - Chemicals other than compressed gases.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Chemicals other than compressed gases. 194.15-15 Section... Scientific Laboratory § 194.15-15 Chemicals other than compressed gases. Chemicals, including those listed in 49 CFR part 172, may be stored in small working quantities in the chemical laboratory. [CGD 86-033...

46 CFR 194.15-15 - Chemicals other than compressed gases.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Chemicals other than compressed gases. 194.15-15 Section... Scientific Laboratory § 194.15-15 Chemicals other than compressed gases. Chemicals, including those listed in 49 CFR part 172, may be stored in small working quantities in the chemical laboratory. [CGD 86-033...

46 CFR 194.15-15 - Chemicals other than compressed gases.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Chemicals other than compressed gases. 194.15-15 Section... Scientific Laboratory § 194.15-15 Chemicals other than compressed gases. Chemicals, including those listed in 49 CFR part 172, may be stored in small working quantities in the chemical laboratory. [CGD 86-033...

Determinants of job stress in chemical process industry: A factor analysis approach.

PubMed

Menon, Balagopal G; Praveensal, C J; Madhu, G

2015-01-01

Job stress is one of the active research domains in industrial safety research. The job stress can result in accidents and health related issues in workers in chemical process industries. Hence it is important to measure the level of job stress in workers so as to mitigate the same to avoid the worker's safety related problems in the industries. The objective of this study is to determine the job stress factors in the chemical process industry in Kerala state, India. This study also aims to propose a comprehensive model and an instrument framework for measuring job stress levels in the chemical process industries in Kerala, India. The data is collected through a questionnaire survey conducted in chemical process industries in Kerala. The collected data out of 1197 surveys is subjected to principal component and confirmatory factor analysis to develop the job stress factor structure. The factor analysis revealed 8 factors that influence the job stress in process industries. It is also found that the job stress in employees is most influenced by role ambiguity and the least by work environment. The study has developed an instrument framework towards measuring job stress utilizing exploratory factor analysis and structural equation modeling.