A new method of measuring lens refractive index.

PubMed

Buckley, John

2008-07-01

A new clinical method for determining the refractive index of a lens is described. By measuring lens power in air and then immersing the lens in a liquid of known refractive index (n), it is possible to calculate the refractive index of the lens material (micro) by using the formula: micro = (nK (v,1) - K(v,n))/(K (v,1) - K (v,n)) where K (v,1) is the lens power determined in air K (v,n) is the lens power determined in the immersion liquid. The only materials required are a digital lensmeter and a wet cell for holding the lens in a liquid. The theoretical basis of the method is explained and a description given of the limitations. The optimal method of measuring different types of lenses is discussed. Sources of error include the thin lens theory behind the method, the use of a wetcell and the digital lensmeter. The theoretical accuracy of the results is given as 0.02 but 0.01 is usually achieved. In all cases, measuring the front vertex powers (FVP) yields a more accurate estimate of refractive index of a lens than measuring back vertex power (BVP). The author found half the lenses measured attained values within 0.005 of the known material index. This method is usually sufficiently accurate to isolate which lens material has been used in manufacturing and permit manufacturing spectacles that mimic the appearance of an earlier pair. Some suggestions for further refinement are given.

Quality control analytical methods: refractive index.

PubMed

Allen, Loyd V

2015-01-01

There are numerous analytical methods that can be utilized in a compounding pharmacy for a quality-assurance program. Since the index of refraction of a liquid/solution is a physical constant, it can be used to assist in identification of a substance, establish its purity, and, in some instances, to determine the concentration of an analyte in solution. This article serves as an introduction to refractive index and some applications of its use in a compounding program.

The lead-lag relationship between stock index and stock index futures: A thermal optimal path method

NASA Astrophysics Data System (ADS)

Gong, Chen-Chen; Ji, Shen-Dan; Su, Li-Ling; Li, Sai-Ping; Ren, Fei

2016-02-01

The study of lead-lag relationship between stock index and stock index futures is of great importance for its wide application in hedging and portfolio investments. Previous works mainly use conventional methods like Granger causality test, GARCH model and error correction model, and focus on the causality relation between the index and futures in a certain period. By using a non-parametric approach-thermal optimal path (TOP) method, we study the lead-lag relationship between China Securities Index 300 (CSI 300), Hang Seng Index (HSI), Standard and Poor 500 (S&P 500) Index and their associated futures to reveal the variance of their relationship over time. Our finding shows evidence of pronounced futures leadership for well established index futures, namely HSI and S&P 500 index futures, while index of developing market like CSI 300 has pronounced leadership. We offer an explanation based on the measure of an indicator which quantifies the differences between spot and futures prices for the surge of lead-lag function. Our results provide new perspectives for the understanding of the dynamical evolution of lead-lag relationship between stock index and stock index futures, which is valuable for the study of market efficiency and its applications.

Improved retroreflection method for measuring the refractive index of liquids.

PubMed

Shao, Duo; Tian, Linghao; Chen, Jingfei; Chen, Xianfeng

2010-06-01

We propose a new method for measuring the refractive index of liquids with high precision; the method is based on use of the optical fiber end face. As an example, we investigated the refractive index of sugar solution under varying conditions tens of times. The results show that this method has the advantage of higher stability and repeatability. The concentration and the temperature-dependent refractive index of the sugar solution is also experimentally studied.

Complete liquefaction methods and apparatus

DOEpatents

Turner, Terry D.; Wilding, Bruce M.

2013-10-15

A method and apparatus are described to provide complete gas utilization in the liquefaction operation from a source of gas without return of natural gas to the source thereof from the process and apparatus. The mass flow rate of gas input into the system and apparatus may be substantially equal to the mass flow rate of liquefied product output from the system, such as for storage or use.

Refractive index inversion based on Mueller matrix method

NASA Astrophysics Data System (ADS)

Fan, Huaxi; Wu, Wenyuan; Huang, Yanhua; Li, Zhaozhao

2016-03-01

Based on Stokes vector and Jones vector, the correlation between Mueller matrix elements and refractive index was studied with the result simplified, and through Mueller matrix way, the expression of refractive index inversion was deduced. The Mueller matrix elements, under different incident angle, are simulated through the expression of specular reflection so as to analyze the influence of the angle of incidence and refractive index on it, which is verified through the measure of the Mueller matrix elements of polished metal surface. Research shows that, under the condition of specular reflection, the result of Mueller matrix inversion is consistent with the experiment and can be used as an index of refraction of inversion method, and it provides a new way for target detection and recognition technology.

A Safety Index and Method for Flightdeck Evaluation

NASA Technical Reports Server (NTRS)

Latorella, Kara A.

2000-01-01

If our goal is to improve safety through machine, interface, and training design, then we must define a metric of flightdeck safety that is usable in the design process. Current measures associated with our notions of "good" pilot performance and ultimate safety of flightdeck performance fail to provide an adequate index of safe flightdeck performance for design evaluation purposes. The goal of this research effort is to devise a safety index and method that allows us to evaluate flightdeck performance holistically and in a naturalistic experiment. This paper uses Reason's model of accident causation (1990) as a basis for measuring safety, and proposes a relational database system and method for 1) defining a safety index of flightdeck performance, and 2) evaluating the "safety" afforded by flightdeck performance for the purpose of design iteration. Methodological considerations, limitations, and benefits are discussed as well as extensions to this work.

Methods to calibrate and scale axial distances in confocal microscopy as a function of refractive index.

PubMed

Besseling, T H; Jose, J; Van Blaaderen, A

2015-02-01

Accurate distance measurement in 3D confocal microscopy is important for quantitative analysis, volume visualization and image restoration. However, axial distances can be distorted by both the point spread function (PSF) and by a refractive-index mismatch between the sample and immersion liquid, which are difficult to separate. Additionally, accurate calibration of the axial distances in confocal microscopy remains cumbersome, although several high-end methods exist. In this paper we present two methods to calibrate axial distances in 3D confocal microscopy that are both accurate and easily implemented. With these methods, we measured axial scaling factors as a function of refractive-index mismatch for high-aperture confocal microscopy imaging. We found that our scaling factors are almost completely linearly dependent on refractive index and that they were in good agreement with theoretical predictions that take the full vectorial properties of light into account. There was however a strong deviation with the theoretical predictions using (high-angle) geometrical optics, which predict much lower scaling factors. As an illustration, we measured the PSF of a correctly calibrated point-scanning confocal microscope and showed that a nearly index-matched, micron-sized spherical object is still significantly elongated due to this PSF, which signifies that care has to be taken when determining axial calibration or axial scaling using such particles. © 2014 The Authors Journal of Microscopy published by John Wiley & Sons Ltd on behalf of Royal Microscopical Society.

Incidences from modifications of the computational methods of the psophic index

NASA Technical Reports Server (NTRS)

Francois, J.

1981-01-01

In France, the level of annoyance in areas around airports is represented by the psyphic index N. Various modifications were proposed in the method of calculating this indexing order to improve the index as an annoyance indicator. The quality of the modified N index as a prognosis index for annoyance caused by aircraft noise is included.

Aveiro method in reproducing kernel Hilbert spaces under complete dictionary

NASA Astrophysics Data System (ADS)

Mai, Weixiong; Qian, Tao

2017-12-01

Aveiro Method is a sparse representation method in reproducing kernel Hilbert spaces (RKHS) that gives orthogonal projections in linear combinations of reproducing kernels over uniqueness sets. It, however, suffers from determination of uniqueness sets in the underlying RKHS. In fact, in general spaces, uniqueness sets are not easy to be identified, let alone the convergence speed aspect with Aveiro Method. To avoid those difficulties we propose an anew Aveiro Method based on a dictionary and the matching pursuit idea. What we do, in fact, are more: The new Aveiro method will be in relation to the recently proposed, the so called Pre-Orthogonal Greedy Algorithm (P-OGA) involving completion of a given dictionary. The new method is called Aveiro Method Under Complete Dictionary (AMUCD). The complete dictionary consists of all directional derivatives of the underlying reproducing kernels. We show that, under the boundary vanishing condition, bring available for the classical Hardy and Paley-Wiener spaces, the complete dictionary enables an efficient expansion of any given element in the Hilbert space. The proposed method reveals new and advanced aspects in both the Aveiro Method and the greedy algorithm.

Parameter analysis of a photonic crystal fiber with raised-core index profile based on effective index method

NASA Astrophysics Data System (ADS)

Seraji, Faramarz E.; Rashidi, Mahnaz; Khasheie, Vajieh

2006-08-01

Photonic crystal fibers (PCFs) with a stepped raised-core profile and one layer equally spaced holes in the cladding are analyzed. Using effective index method and considering a raised step refractive index difference between the index of the core and the effective index of the cladding, we improve the characteristic parameters such as numerical aperture and V-parameter, and reduce its bending loss to about one tenth of a conventional PCF. Implementing such a structure in PCFs may be one step forward to achieve low loss PCFs for communication applications.

Automated Indexing of the Hazardous Substances Data Bank (HSDB)

PubMed Central

Nuss, Carlo; Chang, Hua Florence; Moore, Dorothy; Fonger, George C.

2003-01-01

The Hazardous Substances Data Bank (HSDB), produced and maintained by the National Library of Medicine (NLM), contains over 4600 records on potentially hazardous chemicals. To enhance information retrieval from HSDB, NLM has undertaken the development of an automated HSDB indexing protocol as part of its Indexing Initiative. The NLM Indexing Initiative investigates methods whereby automated indexing may partially or completely substitute for human indexing. The poster’s purpose is to describe the HSDB Automated Indexing Project. PMID:14728459

Method for selection of optimal road safety composite index with examples from DEA and TOPSIS method.

PubMed

Rosić, Miroslav; Pešić, Dalibor; Kukić, Dragoslav; Antić, Boris; Božović, Milan

2017-01-01

Concept of composite road safety index is a popular and relatively new concept among road safety experts around the world. As there is a constant need for comparison among different units (countries, municipalities, roads, etc.) there is need to choose an adequate method which will make comparison fair to all compared units. Usually comparisons using one specific indicator (parameter which describes safety or unsafety) can end up with totally different ranking of compared units which is quite complicated for decision maker to determine "real best performers". Need for composite road safety index is becoming dominant since road safety presents a complex system where more and more indicators are constantly being developed to describe it. Among wide variety of models and developed composite indexes, a decision maker can come to even bigger dilemma than choosing one adequate risk measure. As DEA and TOPSIS are well-known mathematical models and have recently been increasingly used for risk evaluation in road safety, we used efficiencies (composite indexes) obtained by different models, based on DEA and TOPSIS, to present PROMETHEE-RS model for selection of optimal method for composite index. Method for selection of optimal composite index is based on three parameters (average correlation, average rank variation and average cluster variation) inserted into a PROMETHEE MCDM method in order to choose the optimal one. The model is tested by comparing 27 police departments in Serbia. Copyright © 2016 Elsevier Ltd. All rights reserved.

Approximation methods for the stability analysis of complete synchronization on duplex networks

NASA Astrophysics Data System (ADS)

Han, Wenchen; Yang, Junzhong

2018-01-01

Recently, the synchronization on multi-layer networks has drawn a lot of attention. In this work, we study the stability of the complete synchronization on duplex networks. We investigate effects of coupling function on the complete synchronization on duplex networks. We propose two approximation methods to deal with the stability of the complete synchronization on duplex networks. In the first method, we introduce a modified master stability function and, in the second method, we only take into consideration the contributions of a few most unstable transverse modes to the stability of the complete synchronization. We find that both methods work well for predicting the stability of the complete synchronization for small networks. For large networks, the second method still works pretty well.

Efficient Single-Pass Index Construction for Text Databases.

ERIC Educational Resources Information Center

Heinz, Steffen; Zobel, Justin

2003-01-01

Discusses index construction for text collections, reviews principal approaches to inverted indexes, analyzes their theoretical cost, and presents experimental results of the use of a single-pass inversion method on Web document collections. Shows that the single-pass approach is faster and does not require the complete vocabulary of the indexed…

Methods for prediction of refractive index in glasses for the infrared

NASA Astrophysics Data System (ADS)

McCloy, John S.

2011-06-01

It is often useful to obtain custom glasses that meet particular requirements of refractive index and dispersion for highend optical design and applications. In the case of infrared glasses, limited experimental data are available due to difficulties in processing of these glasses and also measuring refractive indices accurately. This paper proposes methods to estimate refractive index and dispersion as a function of composition for selected infrared-transmitting glasses. Methods for refractive index determination are reviewed and evaluated, including Gladstone-Dale, Wemple- DiDomenico single oscillator, Optical basicity, and Lorentz-Lorenz total polarizability. Various estimates for a set of PbO-Bi2O3-Ga2O3 (heavy metal oxide) and As-S (chalcogenide) glasses will be compared with measured values of index and dispersion.

Methods for Prediction of Refractive Index in Glasses for the Infrared

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCloy, John S.

It is often useful to obtain custom glasses that meet particular requirements of refractive index and dispersion for high-end optical design and applications. In the case of infrared glasses, limited experimental data are available due to difficulties in processing of these glasses and also measuring refractive indices accurately. This paper proposes methods to estimate refractive index and dispersion as a function of composition for selected infrared-transmitting glasses. Methods for refractive index determination are reviewed and evaluated, including Gladstone-Dale, Wemple-DiDomenico single oscillator, Optical basicity, and Lorentz-Lorenz total polarizability. Various estimates for a set of PbO-Bi2O3-Ga2O3 (heavy metal oxide) and As-S (chalcogenide)more » glasses will be compared with measured values of index and dispersion.« less

Inverse Abbe-method for observing small refractive index changes in liquids.

PubMed

Räty, Jukka; Peiponen, Kai-Erik

2015-05-01

This study concerns an optical method for the detection of minuscule refractive index changes in the liquid phase. The proposed method reverses the operation of the traditional Abbe refractometer and thus utilizes the light dispersion properties of materials, i.e. it involves the dependence of the refractive index on light wavelength. In practice, the method includes the detection of light reflection spectra in the visible spectral range. This inverse Abbe method is suitable for liquid quality studies e.g. for monitoring water purity. Tests have shown that the method reveals less than per mil NaCl or ethanol concentrations in water. Copyright © 2015 Elsevier B.V. All rights reserved.

A complete active space valence bond method with nonorthogonal orbitals

NASA Astrophysics Data System (ADS)

Hirao, Kimihiko; Nakano, Haruyuki; Nakayama, Kenichi

1997-12-01

A complete active space self-consistent field (SCF) wave function is transformed into a valence bond type representation built from nonorthogonal orbitals, each strongly localized on a single atom. Nonorthogonal complete active space SCF orbitals are constructed by Ruedenberg's projected localization procedure so that they have maximal overlaps with the corresponding minimum basis set of atomic orbitals of the free-atoms. The valence bond structures which are composed of such nonorthogonal quasiatomic orbitals constitute the wave function closest to the concept of the oldest and most simple valence bond method. The method is applied to benzene, butadiene, hydrogen, and methane molecules and compared to the previously proposed complete active space valence bond approach with orthogonal orbitals. The results demonstrate the validity of the method as a powerful tool for describing the electronic structure of various molecules.

Traffic speed data imputation method based on tensor completion.

PubMed

Ran, Bin; Tan, Huachun; Feng, Jianshuai; Liu, Ying; Wang, Wuhong

2015-01-01

Traffic speed data plays a key role in Intelligent Transportation Systems (ITS); however, missing traffic data would affect the performance of ITS as well as Advanced Traveler Information Systems (ATIS). In this paper, we handle this issue by a novel tensor-based imputation approach. Specifically, tensor pattern is adopted for modeling traffic speed data and then High accurate Low Rank Tensor Completion (HaLRTC), an efficient tensor completion method, is employed to estimate the missing traffic speed data. This proposed method is able to recover missing entries from given entries, which may be noisy, considering severe fluctuation of traffic speed data compared with traffic volume. The proposed method is evaluated on Performance Measurement System (PeMS) database, and the experimental results show the superiority of the proposed approach over state-of-the-art baseline approaches.

Modified Maxium Likelihood Estimation Method for Completely Separated and Quasi-Completely Separated Data for a Dose-Response Model

DTIC Science & Technology

2015-08-01

McCullagh, P.; Nelder, J.A. Generalized Linear Model , 2nd ed.; Chapman and Hall: London, 1989. 7. Johnston, J. Econometric Methods, 3rd ed.; McGraw...FOR A DOSE-RESPONSE MODEL ECBC-TN-068 Kyong H. Park Steven J. Lagan RESEARCH AND TECHNOLOGY DIRECTORATE August 2015 Approved for public release...Likelihood Estimation Method for Completely Separated and Quasi-Completely Separated Data for a Dose-Response Model 5a. CONTRACT NUMBER 5b. GRANT

Method for the concurrent ultrasonic inspection of partially completed welds

DOEpatents

Johnson, John A.; Larsen, Eric D.; Miller, Karen S.; Smartt, Herschel B.; McJunkin, Timothy R.

2002-01-01

A method for the concurrent ultrasonic inspection of partially completed welds is disclosed and which includes providing a pair of transducers which are individually positioned on the opposite sides of a partially completed weld to be inspected; moving the transducers along the length of and laterally inwardly and outwardly relative to the partially completed weld; pulsing the respective transducers to produce an ultrasonic signal which passes through or is reflected from the partially completed weld; receiving from the respective transducers ultrasonic signals which pass through or are reflected from the partially completed welds; and analyzing the ultrasonic signal which has passed through or is reflected from the partially completed weld to determine the presence of any weld defects.

Methods to Calculate the Heat Index as an Exposure Metric in Environmental Health Research

PubMed Central

Bell, Michelle L.; Peng, Roger D.

2013-01-01

Background: Environmental health research employs a variety of metrics to measure heat exposure, both to directly study the health effects of outdoor temperature and to control for temperature in studies of other environmental exposures, including air pollution. To measure heat exposure, environmental health studies often use heat index, which incorporates both air temperature and moisture. However, the method of calculating heat index varies across environmental studies, which could mean that studies using different algorithms to calculate heat index may not be comparable. Objective and Methods: We investigated 21 separate heat index algorithms found in the literature to determine a) whether different algorithms generate heat index values that are consistent with the theoretical concepts of apparent temperature and b) whether different algorithms generate similar heat index values. Results: Although environmental studies differ in how they calculate heat index values, most studies’ heat index algorithms generate values consistent with apparent temperature. Additionally, most different algorithms generate closely correlated heat index values. However, a few algorithms are potentially problematic, especially in certain weather conditions (e.g., very low relative humidity, cold weather). To aid environmental health researchers, we have created open-source software in R to calculate the heat index using the U.S. National Weather Service’s algorithm. Conclusion: We identified 21 separate heat index algorithms used in environmental research. Our analysis demonstrated that methods to calculate heat index are inconsistent across studies. Careful choice of a heat index algorithm can help ensure reproducible and consistent environmental health research. Citation: Anderson GB, Bell ML, Peng RD. 2013. Methods to calculate the heat index as an exposure metric in environmental health research. Environ Health Perspect 121:1111–1119; http://dx.doi.org/10.1289/ehp.1206273

Comparing and refining karst disturbance index methods through application in an island karst setting

NASA Astrophysics Data System (ADS)

Porter, Brandon L.; North, Leslie A.; Polk, Jason S.

2016-12-01

The interconnected nature of surface and subsurface karst environments allows easy disturbance to their aquifers and specialized ecosystems from anthropogenic impacts. The karst disturbance index is a holistic tool used to measure disturbance to karst environments and has been applied and refined through studies in Florida and Italy, among others. Through these applications, the karst disturbance index has evolved into two commonly used methods of application; yet, the karst disturbance index is still susceptible to evaluation and modification for application in other areas around the world. The geographically isolated and highly vulnerable municipality of Arecibo, Puerto Rico's karst area provides an opportunity to test the usefulness and validity of the karst disturbance index in an island setting and to compare and further refine the application of the original and modified methods. This study found the both methods of karst disturbance index application resulted in high disturbance scores (Original Method 0.54 and Modified Method 0.69, respectively) and uncovered multiple considerations for the improvement of the karst disturbance index. An evaluation of multiple methods together in an island setting also resulted in the need for adding additional indicators, including Mogote Removal and Coastal Karst. Collectively, the results provide a holistic approach to using the karst disturbance index in an island karst setting and suggest a modified method by which scaling and weighting may compensate for the difference between the original and modified method scores and allow interested stakeholders to evaluate disturbance regardless of his or her level of expertise.

Traffic Speed Data Imputation Method Based on Tensor Completion

PubMed Central

Ran, Bin; Feng, Jianshuai; Liu, Ying; Wang, Wuhong

2015-01-01

Traffic speed data plays a key role in Intelligent Transportation Systems (ITS); however, missing traffic data would affect the performance of ITS as well as Advanced Traveler Information Systems (ATIS). In this paper, we handle this issue by a novel tensor-based imputation approach. Specifically, tensor pattern is adopted for modeling traffic speed data and then High accurate Low Rank Tensor Completion (HaLRTC), an efficient tensor completion method, is employed to estimate the missing traffic speed data. This proposed method is able to recover missing entries from given entries, which may be noisy, considering severe fluctuation of traffic speed data compared with traffic volume. The proposed method is evaluated on Performance Measurement System (PeMS) database, and the experimental results show the superiority of the proposed approach over state-of-the-art baseline approaches. PMID:25866501

New method for calculating the coupling coefficient in graded index optical fibers

NASA Astrophysics Data System (ADS)

Savović, Svetislav; Djordjevich, Alexandar

2018-05-01

A simple method is proposed for determining the mode coupling coefficient D in graded index multimode optical fibers. It only requires observation of the output modal power distribution P(m, z) for one fiber length z as the Gaussian launching modal power distribution changes, with the Gaussian input light distribution centered along the graded index optical fiber axis (θ0 = 0) without radial offset (r0 = 0). A similar method we previously proposed for calculating the coupling coefficient D in a step-index multimode optical fibers where the output angular power distributions P(θ, z) for one fiber length z with the Gaussian input light distribution launched centrally along the step-index optical fiber axis (θ0 = 0) is needed to be known.

Allometric method to estimate leaf area index for row crops

USDA-ARS?s Scientific Manuscript database

Leaf area index (LAI) is critical for predicting plant metabolism, biomass production, evapotranspiration, and greenhouse gas sequestration, but direct LAI measurements are difficult and labor intensive. Several methods are available to measure LAI indirectly or calculate LAI using allometric method...

A NEW LOG EVALUATION METHOD TO APPRAISE MESAVERDE RE-COMPLETION OPPORTUNITIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albert Greer

2003-09-11

Artificial intelligence tools, fuzzy logic and neural networks were used to evaluate the potential of the behind pipe Mesaverde formation in BMG's Mancos formation wells. A fractal geostatistical mapping algorithm was also used to predict Mesaverde production. Additionally, a conventional geological study was conducted. To date one Mesaverde completion has been performed. The Janet No.3 Mesaverde completion was non-economic. Both the AI method and the geostatistical methods predicted the failure of the Janet No.3. The Gavilan No.1 in the Mesaverde was completed during the course of the study and was an extremely good well. This well was not included inmore » the statistical dataset. The AI method predicted very good production while the fractal map predicted a poor producer.« less

Suicide Attempt as a Risk Factor for Completed Suicide: Even More Lethal Than We Knew

PubMed Central

Bostwick, J. Michael; Pabbati, Chaitanya; Geske, Jennifer R.; McKean, Alastair J.

2017-01-01

Objective While suicide attempt history is considered to robustly predict completed suicide, previous studies have limited generalizability from using convenience samples of specific methods/treatment settings, disregarding previous attempts, or overlooking first-attempt deaths. Eliminating these biases should more accurately estimate suicide prevalence in attempters. Method This observational retrospective-prospective cohort study using the Rochester Epidemiology Project identified 1,490 (555 males/935 females) Olmsted County residents making index suicide attempts (first lifetime attempts reaching medical attention) between 01-01-1986 and 12-31-2007. The National Death Index identified suicides between enrollment and 12-31-2010 (follow-up 3-25 years). Medical records were queried for sex, age, method, and follow-up care for index attempt survivors. Coroner records yielded data on index attempt deaths. Results During the study period, 81/1490 enrollees (5.4%) died by suicide. Of the 81, 48 (59.3%) perished on index attempt; 27 of the surviving 33 index attempt survivors (81.8%) killed themselves within a year. Males were disproportionately represented: 62/81 (11.2% of men; 76.5% of suicides) vs 19/81 (2.0% of women, 23.5% of suicides). Of dead index attempters, 72.9% used guns, yielding an odds ratio for gunshot death vs all other methods of 140 [95%CI:60,325]. When adjusted for covariates, survivors given follow-up psychiatric appointments had significantly lower likelihood of subsequent suicide (OR=0.212[95%CI:0.089, 0.507]). Conclusions At 5.4%, completed suicide prevalence in this community cohort of suicide attempters was almost 59% higher than previously reported. An innovative aspect of this study explains the discrepancy: by including index attempt deaths—approximately 60% of total suicides—suicide prevalence more than doubled. We contend that counting both index and subsequent attempts deaths more accurately reflects prevalence. Our findings support

Bin-Hash Indexing: A Parallel Method for Fast Query Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bethel, Edward W; Gosink, Luke J.; Wu, Kesheng

2008-06-27

This paper presents a new parallel indexing data structure for answering queries. The index, called Bin-Hash, offers extremely high levels of concurrency, and is therefore well-suited for the emerging commodity of parallel processors, such as multi-cores, cell processors, and general purpose graphics processing units (GPU). The Bin-Hash approach first bins the base data, and then partitions and separately stores the values in each bin as a perfect spatial hash table. To answer a query, we first determine whether or not a record satisfies the query conditions based on the bin boundaries. For the bins with records that can not bemore » resolved, we examine the spatial hash tables. The procedures for examining the bin numbers and the spatial hash tables offer the maximum possible level of concurrency; all records are able to be evaluated by our procedure independently in parallel. Additionally, our Bin-Hash procedures access much smaller amounts of data than similar parallel methods, such as the projection index. This smaller data footprint is critical for certain parallel processors, like GPUs, where memory resources are limited. To demonstrate the effectiveness of Bin-Hash, we implement it on a GPU using the data-parallel programming language CUDA. The concurrency offered by the Bin-Hash index allows us to fully utilize the GPU's massive parallelism in our work; over 12,000 records can be simultaneously evaluated at any one time. We show that our new query processing method is an order of magnitude faster than current state-of-the-art CPU-based indexing technologies. Additionally, we compare our performance to existing GPU-based projection index strategies.« less

Establishing an index arbitrage model by applying neural networks method--a case study of Nikkei 225 index.

PubMed

Chen, A P; Chianglin, C Y; Chung, H P

2001-10-01

This paper applies the neural network method to establish an index arbitrage model and compares the arbitrage performances to that from traditional cost of carry arbitrage model. From the empirical results of the Nikkei 225 stock index market, following conclusions can be stated: (1) The basis will get enlarged for a time period, more profitability may be obtained from the trend. (2) If the neural network is applied within the index arbitrage model, twofold of return would be obtained than traditional arbitrage model can do. (3) If the T_basis has volatile trend, the neural network arbitrage model will ignore the peak. Although arbitrageur would lose the chance to get profit, they may reduce the market impact risk.

Measurement method for the refractive index of thick solid and liquid layers.

PubMed

Santić, Branko; Gracin, Davor; Juraić, Krunoslav

2009-08-01

A simple method is proposed for the refractive index measurement of thick solid and liquid layers. In contrast to interferometric methods, no mirrors are used, and the experimental setup is undemanding and simple. The method is based on the variation of transmission caused by optical interference within the layer as a function of incidence angle. A new equation is derived for the positions of the interference extrema versus incidence angle. Scattering at the surfaces and within the sample, as well as weak absorption, do not play important roles. The method is illustrated by the refractive index measurements of sapphire, window glass, and water.

Numerical methods for the design of gradient-index optical coatings.

PubMed

Anzengruber, Stephan W; Klann, Esther; Ramlau, Ronny; Tonova, Diana

2012-12-01

We formulate the problem of designing gradient-index optical coatings as the task of solving a system of operator equations. We use iterative numerical procedures known from the theory of inverse problems to solve it with respect to the coating refractive index profile and thickness. The mathematical derivations necessary for the application of the procedures are presented, and different numerical methods (Landweber, Newton, and Gauss-Newton methods, Tikhonov minimization with surrogate functionals) are implemented. Procedures for the transformation of the gradient coating designs into quasi-gradient ones (i.e., multilayer stacks of homogeneous layers with different refractive indices) are also developed. The design algorithms work with physically available coating materials that could be produced with the modern coating technologies.

Methods of determining complete sensor requirements for autonomous mobility

NASA Technical Reports Server (NTRS)

Curtis, Steven A. (Inventor)

2012-01-01

A method of determining complete sensor requirements for autonomous mobility of an autonomous system includes computing a time variation of each behavior of a set of behaviors of the autonomous system, determining mobility sensitivity to each behavior of the autonomous system, and computing a change in mobility based upon the mobility sensitivity to each behavior and the time variation of each behavior. The method further includes determining the complete sensor requirements of the autonomous system through analysis of the relative magnitude of the change in mobility, the mobility sensitivity to each behavior, and the time variation of each behavior, wherein the relative magnitude of the change in mobility, the mobility sensitivity to each behavior, and the time variation of each behavior are characteristic of the stability of the autonomous system.

Method of determining dispersion dependence of refractive index of nanospheres building opals

NASA Astrophysics Data System (ADS)

Kępińska, Mirosława; Starczewska, Anna; Duka, Piotr

2017-11-01

The method of determining dispersion dependence of refractive index of nanospheres building opals is presented. In this method basing on angular dependences of the spectral positions of Bragg diffraction minima on transmission spectra for opal series of known spheres diameter, the spectrum of effective refractive index for opals and then refractive index for material building opal's spheres is determined. The described procedure is used for determination of neff(λ) for opals and nsph(λ) for material which spheres building investigated opals are made of. The obtained results are compared with literature data of nSiO2(λ) considered in the analysis and interpretation of extremes related to the light diffraction at (hkl) SiO2 opal planes.

A method of determining the refractive index of a prismatic lens.

PubMed

Buckley, John G

2010-01-01

A new method of measuring lens refractive index requiring immersion in solution and measuring lens power in air and in solution is extended. Prompted by a clinical need, the new method using lens power can be extended by applying it to prismatic power as well. This article provides a theoretical basis explaining why this can be done. The prismatic power of a prism is derived from first principles. Snell's Law and geometrical optics provide the framework for demonstrating the validity of the resulting formula. The sameness in formula derived using lens power or prism is shown, both from a paraxial and non-paraxial optics perspective. The effect of varying lens material and amount of prism is considered. The prismatic method described provides a useful alternative method of determining the refractive index of any lens. In some cases, it may be the only method available. Practitioners should consider when each method will provide optimal results.

Methods and Applications of the Audibility Index in Hearing Aid Selection and Fitting

PubMed Central

Amlani, Amyn M.; Punch, Jerry L.; Ching, Teresa Y. C.

2002-01-01

During the first half of the 20th century, communications engineers at Bell Telephone Laboratories developed the articulation model for predicting speech intelligibility transmitted through different telecommunication devices under varying electroacoustic conditions. The profession of audiology adopted this model and its quantitative aspects, known as the Articulation Index and Speech Intelligibility Index, and applied these indices to the prediction of unaided and aided speech intelligibility in hearing-impaired listeners. Over time, the calculation methods of these indices—referred to collectively in this paper as the Audibility Index—have been continually refined and simplified for clinical use. This article provides (1) an overview of the basic principles and the calculation methods of the Audibility Index, the Speech Transmission Index and related indices, as well as the Speech Recognition Sensitivity Model, (2) a review of the literature on using the Audibility Index to predict speech intelligibility of hearing-impaired listeners, (3) a review of the literature on the applicability of the Audibility Index to the selection and fitting of hearing aids, and (4) a discussion of future scientific needs and clinical applications of the Audibility Index. PMID:25425917

MO-F-211-01: Methods for Completing Practice Quality Improvement (PQI).

PubMed

Johnson, J; Brown, K; Ibbott, G; Pawlicki, T

2012-06-01

Practice Quality Improvement (PQI) is becoming an expected part of routine practice in healthcare as an approach to provide more efficient, effective and high quality care. Additionally, as part of the ABR's Maintenance of Certification (MOC) pathway, medical physicists are now expected to complete a PQI project. This session will describe the history behind and benefits of the ABR's MOC program, provide details of quality improvement methods and how to successfully complete a PQI project. PQI methods include various commonly used engineering and management tools. The Plan-Do-Study-Act (PDSA) cycle will be presented as one project planning and implementation tool. Other PQI analysis instruments such as flowcharts, Pareto charts, process control charts and fishbone diagrams will also be explained with examples. Cause analysis, solution development and implementation, and post-implementation measurement will be presented. Project identification and definition as well as appropriate measurement tool selection will be offered. Methods to choose key quality metrics (key quality indicators) will also be addressed. Several sample PQI projects and templates available through the AAPM and other organizations will be described. At least three examples of completed PQI projects will be shared. 1. Identify and define a PQI project 2. Identify and select measurement methods/techniques for use with the PQI project 3. Describe example(s) of completed projects. © 2012 American Association of Physicists in Medicine.

Assessment of complete unilateral cleft lip and palate treatment outcome using EUROCRAN index and associated factors.

PubMed

Arshad, Anas Imran; Alam, Mohammad Khursheed; Khamis, Mohd Fadhli

2017-09-01

Assessment of treatment outcome is the only non-invasive approach to identify the effects of cleft lip and palate repair and modify management accordingly. Here the aim is to assess the outcome of complete unilateral cleft lip and palate (CUCLP) patients using EUROCRAN index and to check whether there are any factors associated with the treatment outcome. It is a retrospective cross sectional study. Dental models were collected from archives of two cleft referral centers in Pakistan. Five blinded examiners scored 101 models twice at two week interval. The primary outcome was mean EUROCRAN scores based on dental arch relationships and palatal surface morphology. A mean(SD) score of 2.72 (0.76) and 2.20 (0.73) was determined based on dental arch relationships and palatal surface morphology, respectively. According to the final logistic regression model, modified Millard technique (cheiloplasty) and Veau-Wardill-Kilners' method (palatoplasty) had higher odds of producing unfavorable treatment outcome. Present study determined a fair and a fair to poor treatment outcome based on dental arch relationships and palatal surface morphology, respectively. Our study suggests a significant association between treatment outcome and primary surgical techniques for lip and palate. These findings could warrant a modification of management protocols to ensure improvement in future cleft outcomes. Copyright © 2017 Elsevier B.V. All rights reserved.

Suicide Attempt as a Risk Factor for Completed Suicide: Even More Lethal Than We Knew.

PubMed

Bostwick, J Michael; Pabbati, Chaitanya; Geske, Jennifer R; McKean, Alastair J

2016-11-01

While suicide attempt history is considered to robustly predict completed suicide, previous studies have limited generalizability because of using convenience samples of specific methods/treatment settings, disregarding previous attempts, or overlooking first-attempt deaths. Eliminating these biases should more accurately estimate suicide prevalence in attempters. This observational retrospective-prospective cohort study using the Rochester Epidemiology Project identified 1,490 (males, N=555; females, N=935) Olmsted County residents making index suicide attempts (first lifetime attempts reaching medical attention) between January 1, 1986, and December 31, 2007. The National Death Index identified suicides between enrollment and December 31, 2010 (follow-up 3-25 years). Medical records were queried for sex, age, method, and follow-up care for index attempt survivors. Coroner records yielded data on index attempt deaths. During the study period, 81/1,490 enrollees (5.4%) died by suicide. Of the 81, 48 (59.3%) perished on index attempt; 27 of the surviving 33 index attempt survivors (81.8%) killed themselves within a year. Males were disproportionately represented: 62/81 (11.2% of men, 76.5% of suicides) compared with 19/81 (2.0% of women, 23.5% of suicides). Of dead index attempters, 72.9% used guns, yielding an odds ratio for gunshot death, compared with all other methods, of 140 (95% CI=60-325). When adjusted for covariates, survivors given follow-up psychiatric appointments had significantly lower likelihood of subsequent suicide (odds ratio=0.212, 95% CI=0.089-0.507). At 5.4%, completed suicide prevalence in this community cohort of suicide attempters was almost 59% higher than previously reported. An innovative aspect of this study explains the discrepancy: by including index attempt deaths-approximately 60% of total suicides-suicide prevalence more than doubled. We contend that counting both index and subsequent attempt deaths more accurately reflects

A single-image method for x-ray refractive index CT.

PubMed

Mittone, A; Gasilov, S; Brun, E; Bravin, A; Coan, P

2015-05-07

X-ray refraction-based computer tomography imaging is a well-established method for nondestructive investigations of various objects. In order to perform the 3D reconstruction of the index of refraction, two or more raw computed tomography phase-contrast images are usually acquired and combined to retrieve the refraction map (i.e. differential phase) signal within the sample. We suggest an approximate method to extract the refraction signal, which uses a single raw phase-contrast image. This method, here applied to analyzer-based phase-contrast imaging, is employed to retrieve the index of refraction map of a biological sample. The achieved accuracy in distinguishing the different tissues is comparable with the non-approximated approach. The suggested procedure can be used for precise refraction computer tomography with the advantage of a reduction of at least a factor of two of both the acquisition time and the dose delivered to the sample with respect to any of the other algorithms in the literature.

Comparing the index-flood and multiple-regression methods using L-moments

NASA Astrophysics Data System (ADS)

Malekinezhad, H.; Nachtnebel, H. P.; Klik, A.

In arid and semi-arid regions, the length of records is usually too short to ensure reliable quantile estimates. Comparing index-flood and multiple-regression analyses based on L-moments was the main objective of this study. Factor analysis was applied to determine main influencing variables on flood magnitude. Ward’s cluster and L-moments approaches were applied to several sites in the Namak-Lake basin in central Iran to delineate homogeneous regions based on site characteristics. Homogeneity test was done using L-moments-based measures. Several distributions were fitted to the regional flood data and index-flood and multiple-regression methods as two regional flood frequency methods were compared. The results of factor analysis showed that length of main waterway, compactness coefficient, mean annual precipitation, and mean annual temperature were the main variables affecting flood magnitude. The study area was divided into three regions based on the Ward’s method of clustering approach. The homogeneity test based on L-moments showed that all three regions were acceptably homogeneous. Five distributions were fitted to the annual peak flood data of three homogeneous regions. Using the L-moment ratios and the Z-statistic criteria, GEV distribution was identified as the most robust distribution among five candidate distributions for all the proposed sub-regions of the study area, and in general, it was concluded that the generalised extreme value distribution was the best-fit distribution for every three regions. The relative root mean square error (RRMSE) measure was applied for evaluating the performance of the index-flood and multiple-regression methods in comparison with the curve fitting (plotting position) method. In general, index-flood method gives more reliable estimations for various flood magnitudes of different recurrence intervals. Therefore, this method should be adopted as regional flood frequency method for the study area and the Namak-Lake basin

VET Program Completion Rates: An Evaluation of the Current Method. Occasional Paper

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2016

2016-01-01

This work asks one simple question: "how reliable is the method used by the National Centre for Vocational Education Research (NCVER) to estimate projected rates of VET program completion?" In other words, how well do early projections align with actual completion rates some years later? Completion rates are simple to calculate with a…

A FORTRAN Program for Computing Refractive Index Using the Double Variation Method.

ERIC Educational Resources Information Center

Blanchard, Frank N.

1984-01-01

Describes a computer program which calculates a best estimate of refractive index and dispersion from a large number of observations using the double variation method of measuring refractive index along with Sellmeier constants of the immersion oils. Program listing with examples will be provided on written request to the author. (Author/JM)

Approximate method of variational Bayesian matrix factorization/completion with sparse prior

NASA Astrophysics Data System (ADS)

Kawasumi, Ryota; Takeda, Koujin

2018-05-01

We derive the analytical expression of a matrix factorization/completion solution by the variational Bayes method, under the assumption that the observed matrix is originally the product of low-rank, dense and sparse matrices with additive noise. We assume the prior of a sparse matrix is a Laplace distribution by taking matrix sparsity into consideration. Then we use several approximations for the derivation of a matrix factorization/completion solution. By our solution, we also numerically evaluate the performance of a sparse matrix reconstruction in matrix factorization, and completion of a missing matrix element in matrix completion.

An efficient 3D R-tree spatial index method for virtual geographic environments

NASA Astrophysics Data System (ADS)

Zhu, Qing; Gong, Jun; Zhang, Yeting

A three-dimensional (3D) spatial index is required for real time applications of integrated organization and management in virtual geographic environments of above ground, underground, indoor and outdoor objects. Being one of the most promising methods, the R-tree spatial index has been paid increasing attention in 3D geospatial database management. Since the existing R-tree methods are usually limited by their weakness of low efficiency, due to the critical overlap of sibling nodes and the uneven size of nodes, this paper introduces the k-means clustering method and employs the 3D overlap volume, 3D coverage volume and the minimum bounding box shape value of nodes as the integrative grouping criteria. A new spatial cluster grouping algorithm and R-tree insertion algorithm is then proposed. Experimental analysis on comparative performance of spatial indexing shows that by the new method the overlap of R-tree sibling nodes is minimized drastically and a balance in the volumes of the nodes is maintained.

Method and system for efficiently searching an encoded vector index

DOEpatents

Bui, Thuan Quang; Egan, Randy Lynn; Kathmann, Kevin James

2001-09-04

Method and system aspects for efficiently searching an encoded vector index are provided. The aspects include the translation of a search query into a candidate bitmap, and the mapping of data from the candidate bitmap into a search result bitmap according to entry values in the encoded vector index. Further, the translation includes the setting of a bit in the candidate bitmap for each entry in a symbol table that corresponds to candidate of the search query. Also included in the mapping is the identification of a bit value in the candidate bitmap pointed to by an entry in an encoded vector.

The index-flood and the GRADEX methods combination for flood frequency analysis.

NASA Astrophysics Data System (ADS)

Fuentes, Diana; Di Baldassarre, Giuliano; Quesada, Beatriz; Xu, Chong-Yu; Halldin, Sven; Beven, Keith

2017-04-01

Flood frequency analysis is used in many applications, including flood risk management, design of hydraulic structures, and urban planning. However, such analysis requires of long series of observed discharge data which are often not available in many basins around the world. In this study, we tested the usefulness of combining regional discharge and local precipitation data to estimate the event flood volume frequency curve for 63 catchments in Mexico, Central America and the Caribbean. This was achieved by combining two existing flood frequency analysis methods, the regionalization index-flood approach with the GRADEX method. For up to 10-years return period, similar shape of the scaled flood frequency curve for catchments with similar flood behaviour was assumed from the index-flood approach. For return periods larger than 10-years the probability distribution of rainfall and discharge volumes were assumed to be asymptotically and exponential-type functions with the same scale parameter from the GRADEX method. Results showed that if the mean annual flood (MAF), used as index-flood, is known, the index-flood approach performed well for up to 10 years return periods, resulting in 25% mean relative error in prediction. For larger return periods the prediction capability decreased but could be improved by the use of the GRADEX method. As the MAF is unknown at ungauged and short-period measured basins, we tested predicting the MAF using catchments climate-physical characteristics, and discharge statistics, the latter when observations were available for only 8 years. Only the use of discharge statistics resulted in acceptable predictions.

Aquifer sensitivity to pesticide leaching: Testing a soils and hydrogeologic index method

USGS Publications Warehouse

Mehnert, E.; Keefer, D.A.; Dey, W.S.; Wehrmann, H.A.; Wilson, S.D.; Ray, C.

2005-01-01

For years, researchers have sought index and other methods to predict aquifer sensitivity and vulnerability to nonpoint pesticide contamination. In 1995, an index method and map were developed to define aquifer sensitivity to pesticide leaching based on a combination of soil and hydrogeologic factors. The soil factor incorporated three soil properties: hydraulic conductivity, amount of organic matter within individual soil layers, and drainage class. These properties were obtained from a digital soil association map. The hydrogeologic factor was depth to uppermost aquifer material. To test this index method, a shallow ground water monitoring well network was designed, installed, and sampled in Illinois. The monitoring wells had a median depth of 7.6 m and were located adjacent to corn and soybean fields where the only known sources of pesticides were those used in normal agricultural production. From September 1998 through February 2001, 159 monitoring wells were sampled for 14 pesticides but no pesticide metabolites. Samples were collected and analyzed to assess the distribution of pesticide occurrence across three units of aquifer sensitivity. Pesticides were detected in 18% of all samples and nearly uniformly from samples from the three units of aquifer sensitivity. The new index method did not predict pesticide occurrence because occurrence was not dependent on the combined soil and hydrogeologic factors. However, pesticide occurrence was dependent on the tested hydrogeologic factor and was three times higher in areas where the depth to the uppermost aquifer was <6 m than in areas where the depth to the uppermost aquifer was 6 to <15 m. Copyright ?? 2005 National Ground Water Association.

Hazard assessment of hydraulic fracturing chemicals using an indexing method.

PubMed

Hu, Guangji; Liu, Tianyi; Hager, James; Hewage, Kasun; Sadiq, Rehan

2018-04-01

The rapid expansion of unconventional natural gas production has triggered considerable public concerns, particularly regarding environmental and human health (EHH) risks posed by various chemical additives used in hydraulic fracturing (HF) operations. There is a need to assess the potential EHH hazards of additives used in real-world HF operations. In this study, HF additive and fracturing fluid data was acquired, and EHH hazards were assessed using an indexing approach. The indexing system analyzed chemical toxicological data of different ingredients contained within additives and produced an aggregated EHH safety index for each additive, along with an indicator describing the completeness of the chemical toxicological data. The results show that commonly used additives are generally associated with medium-level EHH hazards. In each additive category, ingredients of high EHH concern were identified, and the high hazard designation was primarily attributed to ingredients' high aquatic toxicity and carcinogenic effects. Among all assessed additive categories, iron control agents were identified as the greatest EHH hazards. Lack of information, such as undisclosed ingredients and chemical toxicological data gaps, has resulted in different levels of assessment uncertainties. In particular, friction reducers show the highest data incompleteness with regards to EHH hazards. This study reveals the potential EHH hazards associated with chemicals used in current HF field operations and can provide decision makers with valuable information to facilitate sustainable and responsible unconventional gas production. Copyright © 2017 Elsevier B.V. All rights reserved.

A Hybrid Spatio-Temporal Data Indexing Method for Trajectory Databases

PubMed Central

Ke, Shengnan; Gong, Jun; Li, Songnian; Zhu, Qing; Liu, Xintao; Zhang, Yeting

2014-01-01

In recent years, there has been tremendous growth in the field of indoor and outdoor positioning sensors continuously producing huge volumes of trajectory data that has been used in many fields such as location-based services or location intelligence. Trajectory data is massively increased and semantically complicated, which poses a great challenge on spatio-temporal data indexing. This paper proposes a spatio-temporal data indexing method, named HBSTR-tree, which is a hybrid index structure comprising spatio-temporal R-tree, B*-tree and Hash table. To improve the index generation efficiency, rather than directly inserting trajectory points, we group consecutive trajectory points as nodes according to their spatio-temporal semantics and then insert them into spatio-temporal R-tree as leaf nodes. Hash table is used to manage the latest leaf nodes to reduce the frequency of insertion. A new spatio-temporal interval criterion and a new node-choosing sub-algorithm are also proposed to optimize spatio-temporal R-tree structures. In addition, a B*-tree sub-index of leaf nodes is built to query the trajectories of targeted objects efficiently. Furthermore, a database storage scheme based on a NoSQL-type DBMS is also proposed for the purpose of cloud storage. Experimental results prove that HBSTR-tree outperforms TB*-tree in some aspects such as generation efficiency, query performance and query type. PMID:25051028

A hybrid spatio-temporal data indexing method for trajectory databases.

PubMed

Ke, Shengnan; Gong, Jun; Li, Songnian; Zhu, Qing; Liu, Xintao; Zhang, Yeting

2014-07-21

In recent years, there has been tremendous growth in the field of indoor and outdoor positioning sensors continuously producing huge volumes of trajectory data that has been used in many fields such as location-based services or location intelligence. Trajectory data is massively increased and semantically complicated, which poses a great challenge on spatio-temporal data indexing. This paper proposes a spatio-temporal data indexing method, named HBSTR-tree, which is a hybrid index structure comprising spatio-temporal R-tree, B*-tree and Hash table. To improve the index generation efficiency, rather than directly inserting trajectory points, we group consecutive trajectory points as nodes according to their spatio-temporal semantics and then insert them into spatio-temporal R-tree as leaf nodes. Hash table is used to manage the latest leaf nodes to reduce the frequency of insertion. A new spatio-temporal interval criterion and a new node-choosing sub-algorithm are also proposed to optimize spatio-temporal R-tree structures. In addition, a B*-tree sub-index of leaf nodes is built to query the trajectories of targeted objects efficiently. Furthermore, a database storage scheme based on a NoSQL-type DBMS is also proposed for the purpose of cloud storage. Experimental results prove that HBSTR-tree outperforms TB*-tree in some aspects such as generation efficiency, query performance and query type.

Quarantine document system indexing procedure

NASA Technical Reports Server (NTRS)

1972-01-01

The Quarantine Document System (QDS) is described including the indexing procedures and thesaurus of indexing terms. The QDS consists of these functional elements: acquisition, cataloging, indexing, storage, and retrieval. A complete listing of the collection, and the thesaurus are included.

Nutrition Education and Body Mass Index in Grades K-12: A Systematic Review

ERIC Educational Resources Information Center

Price, Cayla; Cohen, Deborah; Pribis, Peter; Cerami, Jean

2017-01-01

Background: Overweight and obese body mass index (BMI) status affects an increasing number of children in the United States. The school setting has been identified as a focus area to implement obesity prevention programs. Methods: A database search of PubMed, Education Search Complete, and Cumulative Index to Nursing and Allied Health Literature…

Vector intensity reconstruction using the data completion method.

PubMed

Langrenne, Christophe; Garcia, Alexandre

2013-04-01

This paper presents an application of the data completion method (DCM) for vector intensity reconstructions. A mobile array of 36 pressure-pressure probes (72 microphones) is used to perform measurements near a planar surface. Nevertheless, since the proposed method is based on integral formulations, DCM can be applied with any kind of geometry. This method requires the knowledge of Cauchy data (pressure and velocity) on a part of the boundary of an empty domain in order to evaluate pressure and velocity on the remaining part of the boundary. Intensity vectors are calculated in the interior domain surrounded by the measurement array. This inverse acoustic problem requires the use of a regularization method to obtain a realistic solution. An experiment in a closed wooden car trunk mock-up excited by a shaker and two loudspeakers is presented. In this case, where the volume of the mock-up is small (0.61 m(3)), standing-waves and fluid structure interactions appear and show that DCM is a powerful tool to identify sources in a confined space.

Using the Method of Water Poverty Index (WPI) to Evaluate the Region Water Security

NASA Astrophysics Data System (ADS)

Fu, Q.; Kachanoski, G.

2008-12-01

Water security is a widely concerned issue in the world nowadays. A new method, water poverty index (WPI), has been used to evaluate the regional water security. Twelve state farms in Heilongjiang Province, Northeastern China were selected to evaluate water security status based on the data of 2006 by using WPI and mean deviation grading method. The method of WPI includes five key indexes, such as resources(R), access (A), capacity(C), utilization (U) and environment (E). Each key index includes several sub-indexes. According to the results of WPI, the grade of each farm has been calculated by using the method of mean deviation grading. Thus, the radar images can be protracted of each farm. From the radar images, the conclusions can be drawn that the WPI values of Farms 853 and Hongqiling were in very safe status, while that of Farm Raohe was in safe status, those of Farms Youyi, 597, 852, 291 and Jiangchuan were in moderate safe status, that of Farm Beixing was in low safe status and those of Farms Shuangyashan, Shuguang and Baoshan were in unsafe status. The results from this study can provide basic information for decision making on rational use of water resources and regulations for regional water safety guarantee system.

A method to locate the radial digital nerve of the index finger.

PubMed

Lourie, G M; Rudolph, H P; Lundy, D W

1998-08-01

The radial digital nerve of the index finger is susceptible to injury during penetrating trauma or elective release of the A1 pulley. The intersection of a line drawn down the midline of the index finger and the proximal palmar crease identifies the location of the radial digital nerve. This method of identifying the topography of the nerve should assist the surgeon in determining the likelihood of injury after penetrating trauma, and preventing injury during elective procedures.

The great contribution: Index Medicus, Index-Catalogue, and IndexCat

PubMed Central

Greenberg, Stephen J.; Gallagher, Patricia E.

2009-01-01

Objective: The systematic indexing of medical literature by the Library of the Surgeon-General's Office (now the National Library of Medicine) has been called “America's greatest contribution to medical knowledge.” In the 1870s, the library launched two indexes: the Index Medicus and the Index-Catalogue of the Library of the Surgeon-General's Office. Index Medicus is better remembered today as the forerunner of MEDLINE, but Index Medicus began as the junior partner of what the library saw as its major publication, the Index-Catalogue. However, the Index-Catalogue had been largely overlooked by many medical librarians until 2004, when the National Library of Medicine released IndexCat, the online version of Index-Catalogue. Access to this huge amount of material raised new questions: What was the coverage of the Index-Catalogue? How did it compare and overlap with the Index Medicus? Method: Over 1,000 randomly generated Index Medicus citations were cross-referenced in IndexCat. Results: Inclusion, form, content, authority control, and subject headings were evaluated, revealing that the relationship between the two publications was neither simple nor static through time. In addition, the authors found interesting anomalies that shed light on how medical literature was selected and indexed in “America's greatest contribution to medical knowledge.” PMID:19404501

The Nurses’ Well-Being Index and Factors Influencing This Index among Nurses in Central China: A Cross-Sectional Study

PubMed Central

Liu, Bing; Hu, Ying; Yu, Chuanhua

2015-01-01

Backgrounds/Objectives A discussion and analysis of factors that contribute to nurses’ happiness index can be useful in developing effective interventions to improve nurses’ enthusiasm, sense of honor and pride and to improve the efficiency and quality of medical services. Methods In this study, 206 registered nurses at the 2011 annual encounter for 12 Hanchuan hospitals completed a questionnaire survey that covered three aspects of the well-being index and thus served as a comprehensive well-being and general information tool. Results Based on their index score, the nurses’ overall happiness level was moderate. The dimensions of the happiness index are listed in descending order of their contribution to the nurses’ comprehensive happiness levels: health concerns, friendly relationships, self-worth, altruism, vitality, positive emotions, personality development, life satisfaction and negative emotions. Four variables (positive emotion, life satisfaction, negative emotions, and friendly relationships) jointly explained 47.80% of the total variance of the happiness index; positive emotions had the greatest impact on the happiness index. Conclusions Appropriate nursing interventions can improve nurses’ happiness index scores, thereby increasing nurses’ motivation and promoting the development of their nursing practice. PMID:26680594

An Novel Continuation Power Flow Method Based on Line Voltage Stability Index

NASA Astrophysics Data System (ADS)

Zhou, Jianfang; He, Yuqing; He, Hongbin; Jiang, Zhuohan

2018-01-01

An novel continuation power flow method based on line voltage stability index is proposed in this paper. Line voltage stability index is used to determine the selection of parameterized lines, and constantly updated with the change of load parameterized lines. The calculation stages of the continuation power flow decided by the angle changes of the prediction of development trend equation direction vector are proposed in this paper. And, an adaptive step length control strategy is used to calculate the next prediction direction and value according to different calculation stages. The proposed method is applied clear physical concept, and the high computing speed, also considering the local characteristics of voltage instability which can reflect the weak nodes and weak area in a power system. Due to more fully to calculate the PV curves, the proposed method has certain advantages on analysing the voltage stability margin to large-scale power grid.

Complete denture base assessments using holograms: dimensional alterations after different activation methods

NASA Astrophysics Data System (ADS)

Dughir, Ciprian; Popovschi, Ana Maria; Cojocariu, Andreea Codruta; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Sinescu, Cosmin; de Sabata, Aldo; Duma, Virgil-Florin

2016-03-01

Holography is a well-developed method with a large range of applications, including dentistry. This study uses holographic methods for the study of total dental prosthesis. The issue is that the transformation of wax denture base in polymethylacrylate causes dimensional alterations and retractions in the final dental constructs. These could cause the failure of the stability of the complete denture in the oral cavity. Thus, the aim of this study is to determine and to compare using holography, total prosthesis obtained using three different manufacturing methods: pressing, injection, and polymerization. Each of the three types of dentures thus produced were recorded over the previously wax complete base holographic plates. The dimensional alterations that appear after using the different activation methods were thus determined. The most significant modification was remarked in the custom press technology, while the smallest variations were detected in the injection alternative.

Automated method to compute Evans index for diagnosis of idiopathic normal pressure hydrocephalus on brain CT images

NASA Astrophysics Data System (ADS)

Takahashi, Noriyuki; Kinoshita, Toshibumi; Ohmura, Tomomi; Matsuyama, Eri; Toyoshima, Hideto

2017-03-01

The early diagnosis of idiopathic normal pressure hydrocephalus (iNPH) considered as a treatable dementia is important. The iNPH causes enlargement of lateral ventricles (LVs). The degree of the enlargement of the LVs on CT or MR images is evaluated by using a diagnostic imaging criterion, Evans index. Evans index is defined as the ratio of the maximal width of frontal horns (FH) of the LVs to the maximal width of the inner skull (IS). Evans index is the most commonly used parameter for the evaluation of ventricular enlargement. However, manual measurement of Evans index is a time-consuming process. In this study, we present an automated method to compute Evans index on brain CT images. The algorithm of the method consisted of five major steps: standardization of CT data to an atlas, extraction of FH and IS regions, the search for the outmost points of bilateral FH regions, determination of the maximal widths of both the FH and the IS, and calculation of Evans index. The standardization to the atlas was performed by using linear affine transformation and non-linear wrapping techniques. The FH regions were segmented by using a three dimensional region growing technique. This scheme was applied to CT scans from 44 subjects, including 13 iNPH patients. The average difference in Evans index between the proposed method and manual measurement was 0.01 (1.6%), and the correlation coefficient of these data for the Evans index was 0.98. Therefore, this computerized method may have the potential to accurately compute Evans index for the diagnosis of iNPH on CT images.

Compact 0-complete trees: A new method for searching large files

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orlandic, R.; Pfaltz, J.L.

1988-01-26

In this report, a novel approach to ordered retrieval in very large files is developed. The method employs a B-tree like search algorithm that is independent of key type or key length because all keys in index blocks are encoded by a 1 byte surrogate. The replacement of actual key sequences by the 1 byte surrogate ensures a maximal possible fan out and greatly reduces the storage overhead of maintaining access indices. Initially, retrieval in binary trie structure is developed. With the aid of a fairly complex recurrence relation, the rather scraggly binary trie is transformed into compact multi-way searchmore » tree. Then the recurrence relation itself is replaced by an unusually simple search algorithm. Then implementation details and empirical performance results are presented. Reduction of index size by 50%--75% opens up the possibility of replicating system-wide indices for parallel access in distributed databases. 23 figs.« less

Nucleic acid indexing

DOEpatents

Guilfoyle, Richard A.; Guo, Zhen

2001-01-01

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

Nucleic acid indexing

DOEpatents

Guilfoyle, Richard A.; Guo, Zhen

1999-01-01

A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

Variable Lifting Index (VLI): A New Method for Evaluating Variable Lifting Tasks.

PubMed

Waters, Thomas; Occhipinti, Enrico; Colombini, Daniela; Alvarez-Casado, Enrique; Fox, Robert

2016-08-01

We seek to develop a new approach for analyzing the physical demands of highly variable lifting tasks through an adaptation of the Revised NIOSH (National Institute for Occupational Safety and Health) Lifting Equation (RNLE) into a Variable Lifting Index (VLI). There are many jobs that contain individual lifts that vary from lift to lift due to the task requirements. The NIOSH Lifting Equation is not suitable in its present form to analyze variable lifting tasks. In extending the prior work on the VLI, two procedures are presented to allow users to analyze variable lifting tasks. One approach involves the sampling of lifting tasks performed by a worker over a shift and the calculation of the Frequency Independent Lift Index (FILI) for each sampled lift and the aggregation of the FILI values into six categories. The Composite Lift Index (CLI) equation is used with lifting index (LI) category frequency data to calculate the VLI. The second approach employs a detailed systematic collection of lifting task data from production and/or organizational sources. The data are organized into simplified task parameter categories and further aggregated into six FILI categories, which also use the CLI equation to calculate the VLI. The two procedures will allow practitioners to systematically employ the VLI method to a variety of work situations where highly variable lifting tasks are performed. The scientific basis for the VLI procedure is similar to that for the CLI originally presented by NIOSH; however, the VLI method remains to be validated. The VLI method allows an analyst to assess highly variable manual lifting jobs in which the task characteristics vary from lift to lift during a shift. © 2015, Human Factors and Ergonomics Society.

Method of determining effects of heat-induced irregular refractive index on an optical system.

PubMed

Song, Xifa; Li, Lin; Huang, Yifan

2015-09-01

The effects of an irregular refractive index on optical performance are examined. A method was developed to express a lens's irregular refractive index distribution. An optical system and its mountings were modeled by a thermomechanical finite element (FE) program in the predicted operating temperature range, -45°C-50°C. FE outputs were elaborated using a MATLAB optimization routine; a nonlinear least squares algorithm was adopted to determine which gradient equation best fit each lens's refractive index distribution. The obtained gradient data were imported into Zemax for sequential ray-tracing analysis. The root mean square spot diameter, modulation transfer function, and diffraction ensquared energy were computed for an optical system under an irregular refractive index and under thermoelastic deformation. These properties are greatly reduced by the irregular refractive index effect, which is one-third to five-sevenths the size of the thermoelastic deformation effect. Thus, thermal analyses of optical systems should consider not only thermoelastic deformation but also refractive index irregularities caused by inhomogeneous temperature.

An Efficient G-XML Data Management Method using XML Spatial Index for Mobile Devices

NASA Astrophysics Data System (ADS)

Tamada, Takashi; Momma, Kei; Seo, Kazuo; Hijikata, Yoshinori; Nishida, Shogo

This paper presents an efficient G-XML data management method for mobile devices. G-XML is XML based encoding for the transport of geographic information. Mobile devices, such as PDA and mobile-phone, performance trail desktop machines, so some techniques are needed for processing G-XML data on mobile devices. In this method, XML-format spatial index file is used to improve an initial display time of G-XML data. This index file contains XML pointer of each feature in G-XML data and classifies these features by multi-dimensional data structures. From the experimental result, we can prove this method speed up about 3-7 times an initial display time of G-XML data on mobile devices.

A Different Approach to Preparing Novakian Concept Maps: The Indexing Method

ERIC Educational Resources Information Center

Turan Oluk, Nurcan; Ekmekci, Güler

2016-01-01

People who claim that applying Novakian concept maps in Turkish is problematic base their arguments largely upon the structural differences between the English and Turkish languages. This study aims to introduce the indexing method to eliminate problems encountered in Turkish applications of Novakian maps and to share the preliminary results of…

Caliper Method Versus Digital Photogrammetry for Assessing Arch Height Index in Pregnant Women.

PubMed

Harrison, Kathryn D; McCrory, Jean L

2016-11-01

Foot anthropometry may be altered during pregnancy. Pregnant women often report lower-extremity pain that may be related to these alterations. The Arch Height Index Measurement System is a common method of foot arch assessment; however, the required calipers are costly and are not widely available. Thus, we compared the reliability of a digital photogrammetry method of arch height index (AHI) assessment with that of the Arch Height Index Measurement System. Ten pregnant women (mean ± SD: age, 29 ± 4 years; height, 166.9 ± 6.8 cm; weight, 63.3 ± 8.8 kg) in their second trimester were recruited to participate, along with a control group of 10 nulliparous weight-matched women (mean ± SD: age, 22 ± 2 years; height, 164.6 ± 4.8 cm; weight, 61.5 ± 8.1 kg). During the second and third trimesters, and once postpartum, AHI was assessed using calipers and using digital photogrammetry. Mixed model absolute agreement type intraclass correlation coefficient (ICC) was used to determine correlation between the two methods for sitting and standing AHI. The ICC results for sitting AHI only (0.819-0.968) were reasonable for clinical measures; ICC values for standing AHI (0.674-0.789) did not reach values deemed reasonable for clinical use. Caliper and digital photogrammetry methods of AHI assessment are correlated in pregnant women; however, for standing AHI, the correlation is not sufficient for clinical use. Photogrammetry may still be appropriate for clinical use, as long as values from this method are not substituted directly for results obtained from calipers.

Index cost estimate based BIM method - Computational example for sports fields

NASA Astrophysics Data System (ADS)

Zima, Krzysztof

2017-07-01

The paper presents an example ofcost estimation in the early phase of the project. The fragment of relative database containing solution, descriptions, geometry of construction object and unit cost of sports facilities was shown. The Index Cost Estimate Based BIM method calculationswith use of Case Based Reasoning were presented, too. The article presentslocal and global similarity measurement and example of BIM based quantity takeoff process. The outcome of cost calculations based on CBR method was presented as a final result of calculations.

A substitution method to improve completeness of events documentation in anesthesia records.

PubMed

Lamer, Antoine; De Jonckheere, Julien; Marcilly, Romaric; Tavernier, Benoît; Vallet, Benoît; Jeanne, Mathieu; Logier, Régis

2015-12-01

AIMS are optimized to find and display data and curves about one specific intervention but is not retrospective analysis on a huge volume of interventions. Such a system present two main limitation; (1) the transactional database architecture, (2) the completeness of documentation. In order to solve the architectural problem, data warehouses were developed to propose architecture suitable for analysis. However, completeness of documentation stays unsolved. In this paper, we describe a method which allows determining of substitution rules in order to detect missing anesthesia events in an anesthesia record. Our method is based on the principle that missing event could be detected using a substitution one defined as the nearest documented event. As an example, we focused on the automatic detection of the start and the end of anesthesia procedure when these events were not documented by the clinicians. We applied our method on a set of records in order to evaluate; (1) the event detection accuracy, (2) the improvement of valid records. For the year 2010-2012, we obtained event detection with a precision of 0.00 (-2.22; 2.00) min for the start of anesthesia and 0.10 (0.00; 0.35) min for the end of anesthesia. On the other hand, we increased by 21.1% the data completeness (from 80.3 to 97.2% of the total database) for the start and the end of anesthesia events. This method seems to be efficient to replace missing "start and end of anesthesia" events. This method could also be used to replace other missing time events in this particular data warehouse as well as in other kind of data warehouses.

Integrating the Complete Research Project into a Large Qualitative Methods Course

ERIC Educational Resources Information Center

Raddon, Mary-Beth; Nault, Caleb; Scott, Alexis

2008-01-01

Participatory exercises are standard practice in qualitative methods courses; less common are projects that engage students in the entire research process, from research design to write-up. Although the teaching literature provides several models of complete research projects, their feasibility, and appropriateness for large, compulsory,…

In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.

PubMed

Ender, Andreas; Attin, Thomas; Mehl, Albert

2016-03-01

Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Efficient protein structure search using indexing methods

PubMed Central

2013-01-01

Understanding functions of proteins is one of the most important challenges in many studies of biological processes. The function of a protein can be predicted by analyzing the functions of structurally similar proteins, thus finding structurally similar proteins accurately and efficiently from a large set of proteins is crucial. A protein structure can be represented as a vector by 3D-Zernike Descriptor (3DZD) which compactly represents the surface shape of the protein tertiary structure. This simplified representation accelerates the searching process. However, computing the similarity of two protein structures is still computationally expensive, thus it is hard to efficiently process many simultaneous requests of structurally similar protein search. This paper proposes indexing techniques which substantially reduce the search time to find structurally similar proteins. In particular, we first exploit two indexing techniques, i.e., iDistance and iKernel, on the 3DZDs. After that, we extend the techniques to further improve the search speed for protein structures. The extended indexing techniques build and utilize an reduced index constructed from the first few attributes of 3DZDs of protein structures. To retrieve top-k similar structures, top-10 × k similar structures are first found using the reduced index, and top-k structures are selected among them. We also modify the indexing techniques to support θ-based nearest neighbor search, which returns data points less than θ to the query point. The results show that both iDistance and iKernel significantly enhance the searching speed. In top-k nearest neighbor search, the searching time is reduced 69.6%, 77%, 77.4% and 87.9%, respectively using iDistance, iKernel, the extended iDistance, and the extended iKernel. In θ-based nearest neighbor serach, the searching time is reduced 80%, 81%, 95.6% and 95.6% using iDistance, iKernel, the extended iDistance, and the extended iKernel, respectively. PMID:23691543

Efficient protein structure search using indexing methods.

PubMed

Kim, Sungchul; Sael, Lee; Yu, Hwanjo

2013-01-01

Understanding functions of proteins is one of the most important challenges in many studies of biological processes. The function of a protein can be predicted by analyzing the functions of structurally similar proteins, thus finding structurally similar proteins accurately and efficiently from a large set of proteins is crucial. A protein structure can be represented as a vector by 3D-Zernike Descriptor (3DZD) which compactly represents the surface shape of the protein tertiary structure. This simplified representation accelerates the searching process. However, computing the similarity of two protein structures is still computationally expensive, thus it is hard to efficiently process many simultaneous requests of structurally similar protein search. This paper proposes indexing techniques which substantially reduce the search time to find structurally similar proteins. In particular, we first exploit two indexing techniques, i.e., iDistance and iKernel, on the 3DZDs. After that, we extend the techniques to further improve the search speed for protein structures. The extended indexing techniques build and utilize an reduced index constructed from the first few attributes of 3DZDs of protein structures. To retrieve top-k similar structures, top-10 × k similar structures are first found using the reduced index, and top-k structures are selected among them. We also modify the indexing techniques to support θ-based nearest neighbor search, which returns data points less than θ to the query point. The results show that both iDistance and iKernel significantly enhance the searching speed. In top-k nearest neighbor search, the searching time is reduced 69.6%, 77%, 77.4% and 87.9%, respectively using iDistance, iKernel, the extended iDistance, and the extended iKernel. In θ-based nearest neighbor serach, the searching time is reduced 80%, 81%, 95.6% and 95.6% using iDistance, iKernel, the extended iDistance, and the extended iKernel, respectively.

A Simplified Technique to Measure Plaque on the Intaglio Surfaces of Complete Dentures.

PubMed

Almas, Khalid; Salameh, Ziad; Kutkut, Ahmad; Al Doubali, Ahmad

2015-04-01

The main aim of this study was to develop a simplified quantitative denture plaque index that could help dentists to motivate denture patients to maintain optimal oral hygiene. The secondary aim was to assess specific areas of dentures more prone to accumulate plaque and subjects' oral hygiene habits related to their dentures. One hundred subjects who wore maxillary and/or mandibular complete dentures for at least one year were included in the study as a powered sample. Fifteen females and 85 males, age range 45-75 years, were recruited. The study was carried out at King Saud University (KSU), College of Dentistry. A plaque disclosing solution was used to assess the plaque covered areas of denture. A quantitative percentage (10 x 10%) score index was developed by assessing plaque scores from digital images of intaglio surfaces of the dentures. The weighted kappa method was used to assess inter-examiner agreement in the main study. The new denture plaque index was identified as ASKD-DPI (Almas, Salameh, Kutkut, and Doubali-Denture Plaque Index). It ranged from 0 - 100%, and reflected the percentage of the intaglio surfaces of maxillary and mandibular complete dentures that contained plaque. It also classified quantitative percentages: 30 subjects ranged from 0 - 30% (low DPI), 50 subjects ranged from 31 - 70% (moderate DPI), and 20 subjects ranged from 71 - 100% (high DPI) denture plaque score. A simplified denture plaque index (ASKD-DPI) technique was developed and tested in this study. ASKD-DPI may be used for evaluating denture plaque scores, monitoring denture hygiene, and measuring compliance of patients regarding plaque control for complete dentures.

Application of one-way ANOVA in completely randomized experiments

NASA Astrophysics Data System (ADS)

Wahid, Zaharah; Izwan Latiff, Ahmad; Ahmad, Kartini

2017-12-01

This paper describes an application of a statistical technique one-way ANOVA in completely randomized experiments with three replicates. This technique was employed to a single factor with four levels and multiple observations at each level. The aim of this study is to investigate the relationship between chemical oxygen demand index and location on-sites. Two different approaches are employed for the analyses; critical value and p-value. It also presents key assumptions of the technique to be satisfied by the data in order to obtain valid results. Pairwise comparisons by Turkey method are also considered and discussed to determine where the significant differences among the means is after the ANOVA has been performed. The results revealed that there are statistically significant relationship exist between the chemical oxygen demand index and the location on-sites.

Index to Computer Assisted Instruction.

ERIC Educational Resources Information Center

Lekan, Helen A., Ed.

The computer assisted instruction (CAI) programs and projects described in this index are listed by subject matter. The index gives the program name, author, source, description, prerequisites, level of instruction, type of student, average completion time, logic and program, purpose for which program was designed, supplementary…

Use of a variational moment method in calculating propagation constants for waveguides with an arbitrary index profile.

PubMed

Hardy, A; Itzkowitz, M; Griffel, G

1989-05-15

A variational moment method is used to calculate propagation constants of 1-D optical waveguides with an arbitrary index profile. The method is applicable to 2-D waveguides as well, and the index profiles need not be symmetric. Examples are given for the lowest-order and the next higher-order modes and are compared with exact numerical solutions.

Automated MeSH indexing of the World-Wide Web.

PubMed Central

Fowler, J.; Kouramajian, V.; Maram, S.; Devadhar, V.

1995-01-01

To facilitate networked discovery and information retrieval in the biomedical domain, we have designed a system for automatic assignment of Medical Subject Headings to documents retrieved from the World-Wide Web. Our prototype implementations show significant promise. We describe our methods and discuss the further development of a completely automated indexing tool called the "Web-MeSH Medibot." PMID:8563421

Study on the Application of the Kent Index Method on the Risk Assessment of Disastrous Accidents in Subway Engineering

PubMed Central

Lu, Hao; Wang, Mingyang; Yang, Baohuai; Rong, Xiaoli

2013-01-01

With the development of subway engineering, according to uncertain factors and serious accidents involved in the construction of subways, implementing risk assessment is necessary and may bring a number of benefits for construction safety. The Kent index method extensively used in pipeline construction is improved to make risk assessment much more practical for the risk assessment of disastrous accidents in subway engineering. In the improved method, the indexes are divided into four categories, namely, basic, design, construction, and consequence indexes. In this study, a risk assessment model containing four kinds of indexes is provided. Three kinds of risk occurrence modes are listed. The probability index model which considers the relativity of the indexes is established according to the risk occurrence modes. The model provides the risk assessment process through the fault tree method and has been applied in the risk assessment of Nanjing subway's river-crossing tunnel construction. Based on the assessment results, the builders were informed of what risks should be noticed and what they should do to avoid the risks. The need for further research is discussed. Overall, this method may provide a tool for the builders, and improve the safety of the construction. PMID:23710136

Completed Research in Health, Physical Education, and Recreation Including International Sources. Volume 17, 1975 Edition Covering Research Completed in 1974.

ERIC Educational Resources Information Center

Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.

This compilation lists research completed in health, physical education, and allied areas during 1974. It is arranged in three parts. Part one is an index which cross references the listings in parts two and three. References are arranged under subject headings, which are in alphabetical order. Instructions for using the index are also given in…

Database and new models based on a group contribution method to predict the refractive index of ionic liquids.

PubMed

Wang, Xinxin; Lu, Xingmei; Zhou, Qing; Zhao, Yongsheng; Li, Xiaoqian; Zhang, Suojiang

2017-08-02

Refractive index is one of the important physical properties, which is widely used in separation and purification. In this study, the refractive index data of ILs were collected to establish a comprehensive database, which included about 2138 pieces of data from 1996 to 2014. The Group Contribution-Artificial Neural Network (GC-ANN) model and Group Contribution (GC) method were employed to predict the refractive index of ILs at different temperatures from 283.15 K to 368.15 K. Average absolute relative deviations (AARD) of the GC-ANN model and the GC method were 0.179% and 0.628%, respectively. The results showed that a GC-ANN model provided an effective way to estimate the refractive index of ILs, whereas the GC method was simple and extensive. In summary, both of the models were accurate and efficient approaches for estimating refractive indices of ILs.

Refractive index gradient measurement across the thickness of a dielectric film by the prism coupling method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokolov, Viktor I; Panchenko, Vladislav Ya; Seminogov, V N

2012-08-31

A method is proposed for measuring the refractive index gradient n(z) in nonuniformly thick dielectric films. The method is based on the excitation of waveguide modes in a film using the prism coupling technique and on the calculation of n(z) and film thickness H{sub f} with the help of the angular positions of the TE or TM modes. The method can be used for an arbitrary shape of the index modulation over the film thickness in the limit of a small gradient [{Delta} n(z)/n(z) || 1]. (laser applications and other topics in quantum electronics)

A method for the detection of the refractive index of irregular shape solid pigments in light absorbing liquid matrix.

PubMed

Niskanen, Ilpo; Räty, Jukka; Peiponen, Kai-Erik

2010-06-15

The immersion liquid method is powerful for the measurement of the refractive index of solid particles in a liquid matrix. However, this method applies best for cases when the liquid matrix is transparent. A problem is usually how to assess the refractive index of a pigment when it is in a colored host liquid. In this article we introduce a method, and show that by combining so-called multifunction spectrophotometer, immersion liquid method and detection of light transmission and reflection we can assess the refractive index of a pigment in a colored liquid, and also the extinction or absorption coefficient of the host liquid.

Estimation of confidence limits for descriptive indexes derived from autoregressive analysis of time series: Methods and application to heart rate variability.

PubMed

Beda, Alessandro; Simpson, David M; Faes, Luca

2017-01-01

The growing interest in personalized medicine requires making inferences from descriptive indexes estimated from individual recordings of physiological signals, with statistical analyses focused on individual differences between/within subjects, rather than comparing supposedly homogeneous cohorts. To this end, methods to compute confidence limits of individual estimates of descriptive indexes are needed. This study introduces numerical methods to compute such confidence limits and perform statistical comparisons between indexes derived from autoregressive (AR) modeling of individual time series. Analytical approaches are generally not viable, because the indexes are usually nonlinear functions of the AR parameters. We exploit Monte Carlo (MC) and Bootstrap (BS) methods to reproduce the sampling distribution of the AR parameters and indexes computed from them. Here, these methods are implemented for spectral and information-theoretic indexes of heart-rate variability (HRV) estimated from AR models of heart-period time series. First, the MS and BC methods are tested in a wide range of synthetic HRV time series, showing good agreement with a gold-standard approach (i.e. multiple realizations of the "true" process driving the simulation). Then, real HRV time series measured from volunteers performing cognitive tasks are considered, documenting (i) the strong variability of confidence limits' width across recordings, (ii) the diversity of individual responses to the same task, and (iii) frequent disagreement between the cohort-average response and that of many individuals. We conclude that MC and BS methods are robust in estimating confidence limits of these AR-based indexes and thus recommended for short-term HRV analysis. Moreover, the strong inter-individual differences in the response to tasks shown by AR-based indexes evidence the need of individual-by-individual assessments of HRV features. Given their generality, MC and BS methods are promising for applications

Matrix description of the complete topology of three-dimensional cells

PubMed Central

Xue, Weihua; Wang, Hao; Liu, Guoquan; Meng, Li; Xiang, Song; Ma, Guang; Li, Wenwen

2016-01-01

A new, efficient method based on a series of matrices is introduced to completely describe the detailed topology of individual domains and their topology evolution in three-dimensional cellular structures. With this approach, we found a lot of new topological grain forms which are never reported before, i.e., there are total 8 and 32 topological forms for 7- and 8-faced grains respectively, other than the reported 7 and 27. This method is proved to be a practical tool to predict all possible grain forms efficiently. Moreover, a connectivity index of grain forms serves as a new convenient differentiator of different multicellular structures. PMID:27160500

A novel method to construct an air quality index based on air pollution profiles.

PubMed

Thach, Thuan-Quoc; Tsang, Hilda; Cao, Peihua; Ho, Lai-Ming

2018-01-01

Air quality indices based on the maximum of sub-indices of pollutants are easy to produce and help quantify the degree of air pollution. However, they discount the additive effects of multiple pollutants and are only sensitive to changes in highest sub-index. We propose a simple and concise method to construct an air quality index that takes into account additive effects of multiple pollutants and evaluate the extent to which this index predicts health effects. We obtained concentrations of four criteria pollutants: particulate matter with aerodynamic diameter ≤ 10μm (PM 10 ), sulphur dioxide (SO 2 ), nitrogen dioxide (NO 2 ) and ozone (O 3 ) and daily admissions to Hong Kong hospitals for cardiovascular and respiratory diseases for all ages and those 65 years or older for years 2001-2012. We derived sub-indices of the four criteria pollutants, calculated by normalizing pollutant concentrations to their respective short-term WHO Air Quality Guidelines (WHO AQG). We aggregated the sub-indices using the root-mean-power function with an optimal power to form an overall air quality index. The optimal power was determined by minimizing the sum of over- and under-estimated days. We then assessed associations between the pollution bands of the index and cardiovascular and respiratory admissions using a time-stratified case-crossover design adjusted for ambient temperature, relative humidity and influenza epidemics. Further, we conducted case-crossover analyses using the Hong Kong air quality data with the respective standards and classification of pollution bands of the China Air Quality Index (AQI), the United Kingdom Daily AQI (DAQI), and the United States Environmental Protection Agency (USEPA) AQI. The mean concentrations of PM 10 and SO 2 based on maximum 3-h mean exceeded the WHO AQG by 37% and 50%, respectively. We identified the combined condition of observed high-pollution days as either at least one pollutant > 1.5×WHO AQG or at least two pollutants > 1.0�

Estimation of effective refractive index of birefringent particles using a combination of the immersion liquid method and light scattering.

PubMed

Niskanen, Ilpo; Räty, Jukka; Peiponen, Kai-Erik

2008-04-01

A method to detect the effective refractive index and concentration of birefringent pigments is suggested. The method is based on the utilization of the immersion liquid method and a multifunction spectrophotometer for the measurement of back scattered light. The method has applications in the measurement of the effective refractive index of pigments that are used, e.g., in the paper industry to improve the opacity of paper products.

The Wender Utah Rating Scale: Adult ADHD Diagnostic Tool or Personality Index?

ERIC Educational Resources Information Center

Hill, B.D.; Pella, Russell D.; Singh, Ashvind N.; Jones, Glenn N.; Gouvier, Wm. Drew

2009-01-01

Objective: The Wender Utah Rating Scale (WURS) is used to retroactively assess ADHD symptoms. This study sought to determine whether the WURS actually functions as an index of dysfunctional personality traits. Method: Five hundred twenty-two adult participants completed the WURS and at least one of the following measures: Wechsler Adult…

Diets with High or Low Protein Content and Glycemic Index for Weight-Loss Maintenance

PubMed Central

Larsen, Thomas Meinert; Dalskov, Stine-Mathilde; van Baak, Marleen; Jebb, Susan A.; Papadaki, Angeliki; Pfeiffer, Andreas F.H.; Martinez, J. Alfredo; Handjieva-Darlenska, Teodora; Kunešová, Marie; Pihlsgård, Mats; Stender, Steen; Holst, Claus; Saris, Wim H.M.; Astrup, Arne

2012-01-01

Background Studies of weight-control diets that are high in protein or low in glycemic index have reached varied conclusions, probably owing to the fact that the studies had insufficient power. Methods We enrolled overweight adults from eight European countries who had lost at least 8% of their initial body weight with a 3.3-MJ (800-kcal) low-calorie diet. Participants were randomly assigned, in a two-by-two factorial design, to one of five ad libitum diets to prevent weight regain over a 26-week period: a low-protein and low-glycemic-index diet, a low-protein and high-glycemic-index diet, a high-protein and low-glycemic-index diet, a high-protein and high-glycemic-index diet, or a control diet. Results A total of 1209 adults were screened (mean age, 41 years; body-mass index [the weight in kilograms divided by the square of the height in meters], 34), of whom 938 entered the low-calorie-diet phase of the study. A total of 773 participants who completed that phase were randomly assigned to one of the five maintenance diets; 548 completed the intervention (71%). Fewer participants in the high-protein and the low-glycemic-index groups than in the low-protein–high-glycemic-index group dropped out of the study (26.4% and 25.6%, respectively, vs. 37.4%; P = 0.02 and P = 0.01 for the respective comparisons). The mean initial weight loss with the low-calorie diet was 11.0 kg. In the analysis of participants who completed the study, only the low-protein–high-glycemic-index diet was associated with subsequent significant weight regain (1.67 kg; 95% confidence interval [CI], 0.48 to 2.87). In an intention-to-treat analysis, the weight regain was 0.93 kg less (95% CI, 0.31 to 1.55) in the groups assigned to a high-protein diet than in those assigned to a low-protein diet (P = 0.003) and 0.95 kg less (95% CI, 0.33 to 1.57) in the groups assigned to a low-glycemic-index diet than in those assigned to a high-glycemic-index diet (P = 0.003). The analysis involving

Comparison of U.S. Geological Survey and Ohio Environmental Protection Agency fish-collection methods using the index of biotic integrity and modified index of well-being, 1996-97

USGS Publications Warehouse

Covert, S. Alex

2001-01-01

The U.S. Geological Survey (USGS) and Ohio Environmental Protection Agency (OEPA) collected data on fish from 10 stream sites in 1996 and 3 stream sites in 1997 as part of a comparative study of fish community assessment methods. The sites sampled represent a wide range of basin sizes (ranging from 132?6,330 square kilometers) and surrounding land-use types (urban, agricultural, and mixed). Each agency used its own fish-sampling protocol. Using the Index of Biotic Integrity and Modified Index of Well-Being, differences between data sets were tested for significance by means of the Wilcoxon signed-ranks test (a = 0.05). Results showed that the median of Index of Biotic Integrity differences between data sets was not significantly different from zero (p = 0.2521); however, the same statistical test showed the median differences in the Modified Index of Well-Being scores to be significantly different from zero (p = 0.0158). The differences observed in the Index of Biotic Integrity scores are likely due to natural variability, increased variability at sites with degraded water quality, differences in sampling methods, and low-end adjustments in the Index of Biotic Integrity calculation when fewer than 50 fish were collected. The Modified Index of Well-Being scores calculated by OEPA were significantly higher than those calculated by the USGS. This finding was attributed to the comparatively large numbers and biomass of fish collected by the OEPA. By combining the two indices and viewing them in terms of the percentage attainment of Ohio Warmwater Habitat criteria, the two agencies? data seemed comparable, although the Index of Biotic Integrity scores were more similar than the Modified Index of Well-Being scores.

Numerical method for high accuracy index of refraction estimation for spectro-angular surface plasmon resonance systems.

PubMed

Alleyne, Colin J; Kirk, Andrew G; Chien, Wei-Yin; Charette, Paul G

2008-11-24

An eigenvector analysis based algorithm is presented for estimating refractive index changes from 2-D reflectance/dispersion images obtained with spectro-angular surface plasmon resonance systems. High resolution over a large dynamic range can be achieved simultaneously. The method performs well in simulations with noisy data maintaining an error of less than 10(-8) refractive index units with up to six bits of noise on 16 bit quantized image data. Experimental measurements show that the method results in a much higher signal to noise ratio than the standard 1-D weighted centroid dip finding algorithm.

18 CFR 341.9 - Index of tariffs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Index of tariffs. 341.9... SUBJECT TO SECTION 6 OF THE INTERSTATE COMMERCE ACT § 341.9 Index of tariffs. (a) In general. Each carrier must publish as a separate tariff publication under its FERC Tariff numbering system, a complete index...

Preferences for partner notification method: variation in responses between respondents as index patients and contacts.

PubMed

Apoola, A; Radcliffe, K W; Das, S; Robshaw, V; Gilleran, G; Kumari, B S; Boothby, M; Rajakumar, R

2007-07-01

There have been very few studies focusing on what form of communication patients would find acceptable from a clinic. This study looks at the differences in preferences for various partner notification methods when the respondents were index patients compared with when they had to be contacted because a partner had a sexually transmitted infection (STI). There were 2544 respondents. When the clinic had to notify partners, respondents were more likely to report the method as good when a partner had an STI and they were being contacted compared with when the respondents had an infection and the partner was being contacted. The opposite was true for patient referral partner notification. Therefore, there are variations in the preferences of respondents for partner notification method, which depend on whether they see themselves as index patients or contacts.

Effect of polymerization method and fabrication method on occlusal vertical dimension and occlusal contacts of complete-arch prosthesis.

PubMed

Lima, Ana Paula Barbosa; Vitti, Rafael Pino; Amaral, Marina; Neves, Ana Christina Claro; da Silva Concilio, Lais Regiane

2018-04-01

This study evaluated the dimensional stability of a complete-arch prosthesis processed by conventional method in water bath or microwave energy and polymerized by two different curing cycles. Forty maxillary complete-arch prostheses were randomly divided into four groups (n = 10): MW1 - acrylic resin cured by one microwave cycle; MW2 - acrylic resin cured by two microwave cycles: WB1 - conventional acrylic resin polymerized using one curing cycle in a water bath; WB2 - conventional acrylic resin polymerized using two curing cycles in a water bath. For evaluation of dimensional stability, occlusal vertical dimension (OVD) and area of contact points were measured in two different measurement times: before and after the polymerization method. A digital caliper was used for OVD measurement. Occlusal contact registration strips were used between maxillary and mandibular dentures to measure the contact points. The images were measured using the software IpWin32, and the differences before and after the polymerization methods were calculated. The data were statistically analyzed using the one-way ANOVA and Tukey test (α = .05). he results demonstrated significant statistical differences for OVD between different measurement times for all groups. MW1 presented the highest OVD values, while WB2 had the lowest OVD values ( P <.05). No statistical differences were found for area of contact points among the groups ( P =.7150). The conventional acrylic resin polymerized using two curing cycles in a water bath led to less difference in OVD of complete-arch prosthesis.

Method to create gradient index in a polymer

DOEpatents

Dirk, Shawn M; Johnson, Ross Stefan; Boye, Robert; Descour, Michael R; Sweatt, William C; Wheeler, David R; Kaehr, Bryan James

2014-10-14

Novel photo-writable and thermally switchable polymeric materials exhibit a refractive index change of .DELTA.n.gtoreq.1.0 when exposed to UV light or heat. For example, lithography can be used to convert a non-conjugated precursor polymer to a conjugated polymer having a higher index-of-refraction. Further, two-photon lithography can be used to pattern high-spatial frequency structures.

R-Index Measure of Microencapsulated Tributyrin in Gamma-Cyclodextrin Influenced by Drying Method.

PubMed

Donovan, Joseph D; Lee, Soo-Yeun; Lee, Youngsoo

2016-09-01

Microencapsulation is commonly used in the food industry for a variety of purposes including added ingredient functionally and taste-masking for those ingredients with negative sensory qualities. Tributyrin (TB), a source intestinally-essential butyric acid, possesses negative aroma (cheesy, fecal) and taste (bitter) qualities. This has significantly limited its use in food applications for the potential improvement of intestinal health. Utilizing spray drying and low-temperature oven drying, microcapsules containing TB were produced using whey (WPI), WPI and inulin, and gamma-cyclodextrin (GCD). To determine how microcapsule formulation and drying method affected the perception of TB relative to a control, microencapsulated and free TB were added to an infant formula system and evaluated using the rating method to determine R-index measures. Pooled R-index measures (α = 0.01, 2-tailed, and n = 170) indicated that the only microcapsule not significantly different from the control (R-index below 57.95%) was the GCD and TB oven dried (GCT OD) microcapsule. All other WPI, WPI-inulin, and GCD and TB spray-dried (GCT SD) microcapsules were all significantly different from the control. Average individual R-index results indicated that all microcapsules in infant formula, except for GCT OD, were significantly different (P < 0.01) from the control formula but not from free TB. Spray drying may create microcapsules with surface TB and disturb the GCD-TB complex, allowing free, and surface TB to be perceived by the panelists. The GCT OD microcapsule has the potential to be used for the potential oral treatment of intestinal disorders in functional food applications without the negative sensory qualities of TB. © 2016 Institute of Food Technologists®

A Truncated Nuclear Norm Regularization Method Based on Weighted Residual Error for Matrix Completion.

PubMed

Qing Liu; Zhihui Lai; Zongwei Zhou; Fangjun Kuang; Zhong Jin

2016-01-01

Low-rank matrix completion aims to recover a matrix from a small subset of its entries and has received much attention in the field of computer vision. Most existing methods formulate the task as a low-rank matrix approximation problem. A truncated nuclear norm has recently been proposed as a better approximation to the rank of matrix than a nuclear norm. The corresponding optimization method, truncated nuclear norm regularization (TNNR), converges better than the nuclear norm minimization-based methods. However, it is not robust to the number of subtracted singular values and requires a large number of iterations to converge. In this paper, a TNNR method based on weighted residual error (TNNR-WRE) for matrix completion and its extension model (ETNNR-WRE) are proposed. TNNR-WRE assigns different weights to the rows of the residual error matrix in an augmented Lagrange function to accelerate the convergence of the TNNR method. The ETNNR-WRE is much more robust to the number of subtracted singular values than the TNNR-WRE, TNNR alternating direction method of multipliers, and TNNR accelerated proximal gradient with Line search methods. Experimental results using both synthetic and real visual data sets show that the proposed TNNR-WRE and ETNNR-WRE methods perform better than TNNR and Iteratively Reweighted Nuclear Norm (IRNN) methods.

Microvolume index of refraction determinations by interferometric backscatter

NASA Astrophysics Data System (ADS)

Bornhop, Darryl J.

1995-06-01

A new method has been applied to the determination of fluid bulk properties in small detection volumes. Through the use of an unfocused He-Ne laser beam and a cylindrical tube of capillary dimensions, relative refractive-index measurements are possible. The backscattered light from the illumination of a tube of capillary dimensions produces an interference pattern that is spatially defined and that contains information related to the bulk properties of the fluid contained in the tube. Positional changes in the intensity-modulated beam profile (interference fringes) are directly related to the refractive index of the fluid in the tube. The determination of dn/n at the 10-7 level is possible in probe volumes of 350 pL. The technique has been applied to tubes as small as 75 mu m inner diameter and as large as 1.0 mm inner diameter. No modification of the simple optical bench is required for facilitating the determination of refractive index for the complete range of tube diameters.

A Simple Method to Determine the Refractive Index of Glass.

ERIC Educational Resources Information Center

Mak, Se-yuen

1988-01-01

Describes an experiment for determining the refractive index. Discusses the experiment procedure and mathematical expression for calculating the index. Provides two geometrical diagrams and a graph for determining the index with a typical data. (YP)

Creating a spatially-explicit index: a method for assessing the global wildfire-water risk

NASA Astrophysics Data System (ADS)

Robinne, François-Nicolas; Parisien, Marc-André; Flannigan, Mike; Miller, Carol; Bladon, Kevin D.

2017-04-01

The wildfire-water risk (WWR) has been defined as the potential for wildfires to adversely affect water resources that are important for downstream ecosystems and human water needs for adequate water quantity and quality, therefore compromising the security of their water supply. While tools and methods are numerous for watershed-scale risk analysis, the development of a toolbox for the large-scale evaluation of the wildfire risk to water security has only started recently. In order to provide managers and policy-makers with an adequate tool, we implemented a method for the spatial analysis of the global WWR based on the Driving forces-Pressures-States-Impacts-Responses (DPSIR) framework. This framework relies on the cause-and-effect relationships existing between the five categories of the DPSIR chain. As this approach heavily relies on data, we gathered an extensive set of spatial indicators relevant to fire-induced hydrological hazards and water consumption patterns by human and natural communities. When appropriate, we applied a hydrological routing function to our indicators in order to simulate downstream accumulation of potentially harmful material. Each indicator was then assigned a DPSIR category. We collapsed the information in each category using a principal component analysis in order to extract the most relevant pixel-based information provided by each spatial indicator. Finally, we compiled our five categories using an additive indexation process to produce a spatially-explicit index of the WWR. A thorough sensitivity analysis has been performed in order to understand the relationship between the final risk values and the spatial pattern of each category used during the indexation. For comparison purposes, we aggregated index scores by global hydrological regions, or hydrobelts, to get a sense of regional DPSIR specificities. This rather simple method does not necessitate the use of complex physical models and provides a scalable and efficient tool

Assessment of composite index methods for agricultural vulnerability to climate change.

PubMed

Wiréhn, Lotten; Danielsson, Åsa; Neset, Tina-Simone S

2015-06-01

A common way of quantifying and communicating climate vulnerability is to calculate composite indices from indicators, visualizing these as maps. Inherent methodological uncertainties in vulnerability assessments, however, require greater attention. This study examines Swedish agricultural vulnerability to climate change, the aim being to review various indicator approaches for assessing agricultural vulnerability to climate change and to evaluate differences in climate vulnerability depending on the weighting and summarizing methods. The reviewed methods are evaluated by being tested at the municipal level. Three weighting and summarizing methods, representative of climate vulnerability indices in general, are analysed. The results indicate that 34 of 36 method combinations differ significantly from each other. We argue that representing agricultural vulnerability in a single composite index might be insufficient to guide climate adaptation. We emphasize the need for further research into how to measure and visualize agricultural vulnerability and into how to communicate uncertainties in both data and methods. Copyright © 2015 Elsevier Ltd. All rights reserved.

Research on keyword retrieval method of HBase database based on index structure

NASA Astrophysics Data System (ADS)

Gong, Pijin; Lv, Congmin; Gong, Yongsheng; Ma, Haozhi; Sun, Yang; Wang, Lu

2017-10-01

With the rapid development of manned spaceflight engineering, the scientific experimental data in space application system is increasing rapidly. How to efficiently query the specific data in the mass data volume has become a problem. In this paper, a method of retrieving the object data based on the object attribute as the keyword is proposed. The HBase database is used to store the object data and object attributes, and the secondary index is constructed. The research shows that this method is a good way to retrieve specified data based on object attributes.

Influence of inner circular sealing area impression method on the retention of complete dentures.

PubMed

Wang, Cun-Wei; Shao, Qi; Sun, Hui-Qiang; Mao, Meng-Yun; Zhang, Xin-Wei; Gong, Qi; Xiao, Guo-Ning

2015-01-01

The aims of the present study were to describe an impression method of "inner circular sealing area" and to evaluate the effect of the method on retention, aesthetics and comfort of complete dentures, which lack labial base for patients with maxillary protrusions. Three patients were subjected to the experiment, and two sets of complete maxillary dentures were made for each patient; the first set was made without labial base via an inner circular sealing area method (experimental group) and the second had an intact base that was made with conventional methods (control group). Retention force tests were implemented with a tensile strength assessment device to assess the retention and a visual analogue scale (VAS) was used to evaluate the comfort between the two groups. Results showed larger retention force, better aesthetics and more comfort in the experimental group. The improved two-step impression method formed an inner circular sealing area that prevented damage to the peripheral border seal effect of the denture caused by incomplete bases and obtained better denture retention.

Four Methods for Completing the Conceptual Development Phase of Applied Theory Building Research in HRD

ERIC Educational Resources Information Center

Storberg-Walker, Julia; Chermack, Thomas J.

2007-01-01

The purpose of this article is to describe four methods for completing the conceptual development phase of theory building research for single or multiparadigm research. The four methods selected for this review are (1) Weick's method of "theorizing as disciplined imagination" (1989); (2) Whetten's method of "modeling as theorizing" (2002); (3)…

Estimation of confidence limits for descriptive indexes derived from autoregressive analysis of time series: Methods and application to heart rate variability

PubMed Central

2017-01-01

The growing interest in personalized medicine requires making inferences from descriptive indexes estimated from individual recordings of physiological signals, with statistical analyses focused on individual differences between/within subjects, rather than comparing supposedly homogeneous cohorts. To this end, methods to compute confidence limits of individual estimates of descriptive indexes are needed. This study introduces numerical methods to compute such confidence limits and perform statistical comparisons between indexes derived from autoregressive (AR) modeling of individual time series. Analytical approaches are generally not viable, because the indexes are usually nonlinear functions of the AR parameters. We exploit Monte Carlo (MC) and Bootstrap (BS) methods to reproduce the sampling distribution of the AR parameters and indexes computed from them. Here, these methods are implemented for spectral and information-theoretic indexes of heart-rate variability (HRV) estimated from AR models of heart-period time series. First, the MS and BC methods are tested in a wide range of synthetic HRV time series, showing good agreement with a gold-standard approach (i.e. multiple realizations of the "true" process driving the simulation). Then, real HRV time series measured from volunteers performing cognitive tasks are considered, documenting (i) the strong variability of confidence limits' width across recordings, (ii) the diversity of individual responses to the same task, and (iii) frequent disagreement between the cohort-average response and that of many individuals. We conclude that MC and BS methods are robust in estimating confidence limits of these AR-based indexes and thus recommended for short-term HRV analysis. Moreover, the strong inter-individual differences in the response to tasks shown by AR-based indexes evidence the need of individual-by-individual assessments of HRV features. Given their generality, MC and BS methods are promising for applications

Visualization index for image-enabled medical records

NASA Astrophysics Data System (ADS)

Dong, Wenjie; Zheng, Weilin; Sun, Jianyong; Zhang, Jianguo

2011-03-01

With the widely use of healthcare information technology in hospitals, the patients' medical records are more and more complex. To transform the text- or image-based medical information into easily understandable and acceptable form for human, we designed and developed an innovation indexing method which can be used to assign an anatomical 3D structure object to every patient visually to store indexes of the patients' basic information, historical examined image information and RIS report information. When a doctor wants to review patient historical records, he or she can first load the anatomical structure object and the view the 3D index of this object using a digital human model tool kit. This prototype system helps doctors to easily and visually obtain the complete historical healthcare status of patients, including large amounts of medical data, and quickly locate detailed information, including both reports and images, from medical information systems. In this way, doctors can save time that may be better used to understand information, obtain a more comprehensive understanding of their patients' situations, and provide better healthcare services to patients.

On the Convenience of Using the Complete Linearization Method in Modelling the BLR of AGN

NASA Astrophysics Data System (ADS)

Patriarchi, P.; Perinotto, M.

The Complete Linearization Method (Mihalas, 1978) consists in the determination of the radiation field (at a set of frequency points), atomic level populations, temperature, electron density etc., by resolving the system of radiative transfer, thermal equilibrium, statistical equilibrium equations simultaneously and self-consistently. Since the system is not linear, it must be solved by iteration after linearization, using a perturbative method, starting from an initial guess solution. Of course the Complete Linearization Method is more time consuming than the previous one. But how great can this disadvantage be in the age of supercomputers? It is possible to approximately evaluate the CPU time needed to run a model by computing the number of multiplications necessary to solve the system.

Backward and forward Monte Carlo method for vector radiative transfer in a two-dimensional graded index medium

NASA Astrophysics Data System (ADS)

Qian, Lin-Feng; Shi, Guo-Dong; Huang, Yong; Xing, Yu-Ming

2017-10-01

In vector radiative transfer, backward ray tracing is seldom used. We present a backward and forward Monte Carlo method to simulate vector radiative transfer in a two-dimensional graded index medium, which is new and different from the conventional Monte Carlo method. The backward and forward Monte Carlo method involves dividing the ray tracing into two processes backward tracing and forward tracing. In multidimensional graded index media, the trajectory of a ray is usually a three-dimensional curve. During the transport of a polarization ellipse, the curved ray trajectory will induce geometrical effects and cause Stokes parameters to continuously change. The solution processes for a non-scattering medium and an anisotropic scattering medium are analysed. We also analyse some parameters that influence the Stokes vector in two-dimensional graded index media. The research shows that the Q component of the Stokes vector cannot be ignored. However, the U and V components of the Stokes vector are very small.

Method and apparatus for obtaining complete speech signals for speech recognition applications

NASA Technical Reports Server (NTRS)

Abrash, Victor (Inventor); Cesari, Federico (Inventor); Franco, Horacio (Inventor); George, Christopher (Inventor); Zheng, Jing (Inventor)

2009-01-01

The present invention relates to a method and apparatus for obtaining complete speech signals for speech recognition applications. In one embodiment, the method continuously records an audio stream comprising a sequence of frames to a circular buffer. When a user command to commence or terminate speech recognition is received, the method obtains a number of frames of the audio stream occurring before or after the user command in order to identify an augmented audio signal for speech recognition processing. In further embodiments, the method analyzes the augmented audio signal in order to locate starting and ending speech endpoints that bound at least a portion of speech to be processed for recognition. At least one of the speech endpoints is located using a Hidden Markov Model.

Breaking the indexing ambiguity in serial crystallography.

PubMed

Brehm, Wolfgang; Diederichs, Kay

2014-01-01

In serial crystallography, a very incomplete partial data set is obtained from each diffraction experiment (a `snapshot'). In some space groups, an indexing ambiguity exists which requires that the indexing mode of each snapshot needs to be established with respect to a reference data set. In the absence of such re-indexing information, crystallographers have thus far resorted to a straight merging of all snapshots, yielding a perfectly twinned data set of higher symmetry which is poorly suited for structure solution and refinement. Here, two algorithms have been designed for assembling complete data sets by clustering those snapshots that are indexed in the same way, and they have been tested using 15,445 snapshots from photosystem I [Chapman et al. (2011), Nature (London), 470, 73-77] and with noisy model data. The results of the clustering are unambiguous and enabled the construction of complete data sets in the correct space group P63 instead of (twinned) P6322 that researchers have been forced to use previously in such cases of indexing ambiguity. The algorithms thus extend the applicability and reach of serial crystallography.

Exploring volumetrically indexed cups

NASA Astrophysics Data System (ADS)

Jones, Dustin L.

2011-03-01

This article was inspired by a set of 12 cylindrical cups, which are volumetrically indexed; that is to say, the volume of cup n is equal to n times the volume of cup 1. Various sets of volumetrically indexed cylindrical cups are explored. I demonstrate how this children's toy is ripe for mathematical investigation, with connections to geometry, algebra and differential calculus. Students with an understanding of these topics should be able to complete the analysis and related exercises contained herein.

a New Multi-Spectral Threshold Normalized Difference Water Index Mst-Ndwi Water Extraction Method - a Case Study in Yanhe Watershed

NASA Astrophysics Data System (ADS)

Zhou, Y.; Zhao, H.; Hao, H.; Wang, C.

2018-05-01

Accurate remote sensing water extraction is one of the primary tasks of watershed ecological environment study. Since the Yanhe water system has typical characteristics of a small water volume and narrow river channel, which leads to the difficulty for conventional water extraction methods such as Normalized Difference Water Index (NDWI). A new Multi-Spectral Threshold segmentation of the NDWI (MST-NDWI) water extraction method is proposed to achieve the accurate water extraction in Yanhe watershed. In the MST-NDWI method, the spectral characteristics of water bodies and typical backgrounds on the Landsat/TM images have been evaluated in Yanhe watershed. The multi-spectral thresholds (TM1, TM4, TM5) based on maximum-likelihood have been utilized before NDWI water extraction to realize segmentation for a division of built-up lands and small linear rivers. With the proposed method, a water map is extracted from the Landsat/TM images in 2010 in China. An accuracy assessment is conducted to compare the proposed method with the conventional water indexes such as NDWI, Modified NDWI (MNDWI), Enhanced Water Index (EWI), and Automated Water Extraction Index (AWEI). The result shows that the MST-NDWI method generates better water extraction accuracy in Yanhe watershed and can effectively diminish the confusing background objects compared to the conventional water indexes. The MST-NDWI method integrates NDWI and Multi-Spectral Threshold segmentation algorithms, with richer valuable information and remarkable results in accurate water extraction in Yanhe watershed.

An improved method for determination of refractive index of absorbing films: A simulation study

NASA Astrophysics Data System (ADS)

Özcan, Seçkin; Coşkun, Emre; Kocahan, Özlem; Özder, Serhat

2017-02-01

In this work an improved version of the method presented by Gandhi was presented for determination of refractive index of absorbing films. In this method local maxima of consecutive interference order in transmittance spectrum are used. The method is based on the minimizing procedure leading to the determination of interference order accurately by using reasonable Cauchy parameters. It was tested on theoretically generated transmittance spectrum of absorbing film and the details of the minimization procedure were discussed.

Technology Acceptance and Course Completion Rates in Online Education: A Non-experimental, Mixed Method Study

NASA Astrophysics Data System (ADS)

Allison, Colelia

As the need for quality online courses increase in demand, the acceptance of technology and completion rates become the focus of higher education. The purpose of this non-experimental, mixed method study was to examine the relationship between the university students' perceptions and acceptance of technology and learner completion rates with respect to the development of online courses. This study involved 61 participants from two universities regarding their perceived usefulness (PU) of technology, intent to use technology, and intent to complete a course. Two research questions were examined regarding student perceptions regarding technology employed in an online course and the relationship, if any, between technology acceptance and completion of an online university course. The technology acceptance model (TAM) was used to collect data on the usefulness of course activities and student intent to complete the course. An open-ended questionnaire was administered to collect information concerning student perceptions of course activities. Quantitative data was analyzed using SPSS and Qualtrics, which indicated there was not a significant relationship between technology acceptance and course completion (p = .154). Qualitative data were examined by pattern matching to create a concept map of the theoretical patterns between constructs. Pattern matching revealed many students favored the use of the Internet over Canvas. Furthermore, data showed students enrolled in online courses because of the flexibility and found the multimedia used in the courses as helpful in course completion. Insight was investigated to offer reasons and decisions concerning choice that were made by the students. Future recommendations are to expand mixed methods studies of technology acceptance in various disciplines to gain a better understanding of student perceptions of technology uses, intent to use, and course completion.

EIT image reconstruction based on a hybrid FE-EFG forward method and the complete-electrode model.

PubMed

Hadinia, M; Jafari, R; Soleimani, M

2016-06-01

This paper presents the application of the hybrid finite element-element free Galerkin (FE-EFG) method for the forward and inverse problems of electrical impedance tomography (EIT). The proposed method is based on the complete electrode model. Finite element (FE) and element-free Galerkin (EFG) methods are accurate numerical techniques. However, the FE technique has meshing task problems and the EFG method is computationally expensive. In this paper, the hybrid FE-EFG method is applied to take both advantages of FE and EFG methods, the complete electrode model of the forward problem is solved, and an iterative regularized Gauss-Newton method is adopted to solve the inverse problem. The proposed method is applied to compute Jacobian in the inverse problem. Utilizing 2D circular homogenous models, the numerical results are validated with analytical and experimental results and the performance of the hybrid FE-EFG method compared with the FE method is illustrated. Results of image reconstruction are presented for a human chest experimental phantom.

Comparative study between the results of effective index based matrix method and characterization of fabricated SU-8 waveguide

NASA Astrophysics Data System (ADS)

Samanta, Swagata; Dey, Pradip Kumar; Banerji, Pallab; Ganguly, Pranabendu

2017-01-01

A study regarding the validity of effective-index based matrix method (EIMM) for the fabricated SU-8 channel waveguides is reported. The design method is extremely fast compared to other existing numerical techniques, such as, BPM and FDTD. In EIMM, the effective index method was applied in depth direction of the waveguide and the resulted lateral index profile was analyzed by a transfer matrix method. By EIMM one can compute the guided mode propagation constants and mode profiles for each mode for any dimensions of the waveguides. The technique may also be used to design single mode waveguide. SU-8 waveguide fabrication was carried out by continuous-wave direct laser writing process at 375 nm wavelength. The measured propagation losses of these wire waveguides having air and PDMS as superstrates were 0.51 dB/mm and 0.3 dB/mm respectively. The number of guided modes, obtained theoretically as well as experimentally, for air-cladded waveguide was much more than that of PDMS-cladded waveguide. We were able to excite the isolated fundamental mode for the later by precise fiber positioning, and mode image was recorded. The mode profiles, mode indices, and refractive index profiles were extracted from this mode image of the fundamental mode which matched remarkably well with the theoretical predictions.

A Quantitative Study of a Software Tool that Supports a Part-Complete Solution Method on Learning Outcomes

ERIC Educational Resources Information Center

Garner, Stuart

2009-01-01

This paper reports on the findings from a quantitative research study into the use of a software tool that was built to support a part-complete solution method (PCSM) for the learning of computer programming. The use of part-complete solutions to programming problems is one of the methods that can be used to reduce the cognitive load that students…

Normal Values of Tissue-Muscle Perfusion Indexes of Lower Limbs Obtained with a Scintigraphic Method.

PubMed

Manevska, Nevena; Stojanoski, Sinisa; Pop Gjorceva, Daniela; Todorovska, Lidija; Miladinova, Daniela; Zafirova, Beti

2017-09-01

Introduction Muscle perfusion is a physiologic process that can undergo quantitative assessment and thus define the range of normal values of perfusion indexes and perfusion reserve. The investigation of the microcirculation has a crucial role in determining the muscle perfusion. Materials and method The study included 30 examinees, 24-74 years of age, without a history of confirmed peripheral artery disease and all had normal findings on Doppler ultrasonography and pedo-brachial index of lower extremity (PBI). 99mTc-MIBI tissue muscle perfusion scintigraphy of lower limbs evaluates tissue perfusion in resting condition "rest study" and after workload "stress study", through quantitative parameters: Inter-extremity index (for both studies), left thigh/right thigh (LT/RT) left calf/right calf (LC/RC) and perfusion reserve (PR) for both thighs and calves. Results In our investigated group we assessed the normal values of quantitative parameters of perfusion indexes. Indexes ranged for LT/RT in rest study 0.91-1.05, in stress study 0.92-1.04. LC/RC in rest 0.93-1.07 and in stress study 0.93-1.09. The examinees older than 50 years had insignificantly lower perfusion reserve of these parameters compared with those younger than 50, LC (p=0.98), and RC (p=0.6). Conclusion This non-invasive scintigraphic method allows in individuals without peripheral artery disease to determine the range of normal values of muscle perfusion at rest and stress condition and to clinically implement them in evaluation of patients with peripheral artery disease for differentiating patients with normal from those with impaired lower limbs circulation.

Determining the multi-scale hedge ratios of stock index futures using the lower partial moments method

NASA Astrophysics Data System (ADS)

Dai, Jun; Zhou, Haigang; Zhao, Shaoquan

2017-01-01

This paper considers a multi-scale future hedge strategy that minimizes lower partial moments (LPM). To do this, wavelet analysis is adopted to decompose time series data into different components. Next, different parametric estimation methods with known distributions are applied to calculate the LPM of hedged portfolios, which is the key to determining multi-scale hedge ratios over different time scales. Then these parametric methods are compared with the prevailing nonparametric kernel metric method. Empirical results indicate that in the China Securities Index 300 (CSI 300) index futures and spot markets, hedge ratios and hedge efficiency estimated by the nonparametric kernel metric method are inferior to those estimated by parametric hedging model based on the features of sequence distributions. In addition, if minimum-LPM is selected as a hedge target, the hedging periods, degree of risk aversion, and target returns can affect the multi-scale hedge ratios and hedge efficiency, respectively.

Index metacarpal fracture after tightrope suspension following trapeziectomy: case report.

PubMed

Khalid, Mohammed; Jones, Matthew L

2012-03-01

Trapeziectomy, by itself or combined with ligament reconstruction/interposition arthroplasty, is commonly performed for advanced trapezial-metacarpal arthritis. Several methods and materials, both autogenous and artificial, are commonly used for ligament reconstruction and interposition arthroplasty. Harvesting autologous tendons adds to operative time and could increase potential surgical complications. Using an artificial material would, in theory, avoid some of these problems. However, this approach is not without its problems. We present a case of index metacarpal fracture after using the Arthrex Mini TightRope (Arthrex, Naples, FL) suture button fixation of the thumb and index metacarpals after complete trapeziectomy. Copyright © 2012 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

The Impact of Using Different Methods to Assess Completeness of 24-Hour Urine Collection on Estimating Dietary Sodium.

PubMed

Wielgosz, Andreas; Robinson, Christopher; Mao, Yang; Jiang, Ying; Campbell, Norm R C; Muthuri, Stella; Morrison, Howard

2016-06-01

The standard for population-based surveillance of dietary sodium intake is 24-hour urine testing; however, this may be affected by incomplete urine collection. The impact of different indirect methods of assessing completeness of collection on estimated sodium ingestion has not been established. The authors enlisted 507 participants from an existing community study in 2009 to collect 24-hour urine samples. Several methods of assessing completeness of urine collection were tested. Mean sodium intake varied between 3648 mg/24 h and 7210 mg/24 h depending on the method used. Excluding urine samples collected for longer or shorter than 24 hours increased the estimated urine sodium excretion, even when corrections for the variation in timed collections were applied. Until an accurate method of indirectly assessing completeness of urine collection is identified, the gold standard of administering para-aminobenzoic acid is recommended. Efforts to ensure participants collect complete urine samples are also warranted. ©2015 Wiley Periodicals, Inc.

Augmented Fish Health Monitoring; Volume II of II, Completion Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michak, Patty

1991-12-01

The Bonneville Power Administration (BPA) initiated the Augmented Fish Health Monitoring project in 1986. This project was a five year interagency project involving fish rearing agencies in the Columbia Basin. Participating agencies included: Washington Department of Fisheries (WDF), Oregon Department of Fish and Wildlife, Idaho Department of Fish and Game, and the US Fish and Wildlife Service (USFWS). This is the final data report for the Augmented Fish Health Monitoring project. Data collected and sampling results for 1990 and 1991 are presented within this report. An evaluation of this project can be found in Augmented Fish Health Monitoring, Volume 1,more » Completion Report.'' May, 1991. Pathogen detection methods remained the same from methods described in Augmented Fish Health Monitoring, Annual Report 1989,'' May, 1990. From January 1, 1990 to June 30, 1991 fish health monitoring sampling was conducted. In 1990 21 returning adult stocks were sampled. Juvenile pre-release exams were completed on 20 yearling releases, and 13 sub-yearling releases in 1990. In 1991 17 yearling releases and 11 sub-yearling releases were examined. Midterm sampling was completed on 19 stocks in 1990. Organosomatic analysis was performed at release on index station stocks; Cowlitz spring and fall chinook, Lewis river early coho and Lyons Ferry fall chinook.« less

Completed Suicide with Violent and Non-Violent Methods in Rural Shandong, China: A Psychological Autopsy Study

PubMed Central

Sun, Shi-Hua; Jia, Cun-Xian

2014-01-01

Background This study aims to describe the specific characteristics of completed suicides by violent methods and non-violent methods in rural Chinese population, and to explore the related factors for corresponding methods. Methods Data of this study came from investigation of 199 completed suicide cases and their paired controls of rural areas in three different counties in Shandong, China, by interviewing one informant of each subject using the method of Psychological Autopsy (PA). Results There were 78 (39.2%) suicides with violent methods and 121 (60.8%) suicides with non-violent methods. Ingesting pesticides, as a non-violent method, appeared to be the most common suicide method (103, 51.8%). Hanging (73 cases, 36.7%) and drowning (5 cases, 2.5%) were the only violent methods observed. Storage of pesticides at home and higher suicide intent score were significantly associated with choice of violent methods while committing suicide. Risk factors related to suicide death included negative life events and hopelessness. Conclusions Suicide with violent methods has different factors from suicide with non-violent methods. Suicide methods should be considered in suicide prevention and intervention strategies. PMID:25111835

Reflective Random Indexing and indirect inference: a scalable method for discovery of implicit connections.

PubMed

Cohen, Trevor; Schvaneveldt, Roger; Widdows, Dominic

2010-04-01

The discovery of implicit connections between terms that do not occur together in any scientific document underlies the model of literature-based knowledge discovery first proposed by Swanson. Corpus-derived statistical models of semantic distance such as Latent Semantic Analysis (LSA) have been evaluated previously as methods for the discovery of such implicit connections. However, LSA in particular is dependent on a computationally demanding method of dimension reduction as a means to obtain meaningful indirect inference, limiting its ability to scale to large text corpora. In this paper, we evaluate the ability of Random Indexing (RI), a scalable distributional model of word associations, to draw meaningful implicit relationships between terms in general and biomedical language. Proponents of this method have achieved comparable performance to LSA on several cognitive tasks while using a simpler and less computationally demanding method of dimension reduction than LSA employs. In this paper, we demonstrate that the original implementation of RI is ineffective at inferring meaningful indirect connections, and evaluate Reflective Random Indexing (RRI), an iterative variant of the method that is better able to perform indirect inference. RRI is shown to lead to more clearly related indirect connections and to outperform existing RI implementations in the prediction of future direct co-occurrence in the MEDLINE corpus. 2009 Elsevier Inc. All rights reserved.

Analysis of beam propagation characteristics in gain-guided, index antiguided fibers with the beam propagation method.

PubMed

Ai, Fei; Qian, Jianqiang; Shi, Junfeng; Zhang, Machi

2017-10-10

The transmission properties of beams in gain fibers are studied with the complex refractive index beam propagation method (CRI-BPM). The method is checked by comparison with an analytic method. The behavior of a gain-guided, index antiguided (GG-IAG) fiber with different gain coefficients is studied. The simulation results show that the signal can transfer in the fiber with almost no loss when the gain coefficient reaches the threshold of the fundamental mode, and the shape of output spot will have no major changes when the gain coefficient is over the thresholds of high-order modes, even when the mode competition is not obvious. The CRI-BPM can predict the changes in light power and light mode at the same time, and will be very useful in the designing of fiber amplifiers and lasers with complex structures. More factors will be considered in this method to provide reference for practical application in our further research.

A probabilistic method for computing quantitative risk indexes from medical injuries compensation claims.

PubMed

Dalle Carbonare, S; Folli, F; Patrini, E; Giudici, P; Bellazzi, R

2013-01-01

The increasing demand of health care services and the complexity of health care delivery require Health Care Organizations (HCOs) to approach clinical risk management through proper methods and tools. An important aspect of risk management is to exploit the analysis of medical injuries compensation claims in order to reduce adverse events and, at the same time, to optimize the costs of health insurance policies. This work provides a probabilistic method to estimate the risk level of a HCO by computing quantitative risk indexes from medical injury compensation claims. Our method is based on the estimate of a loss probability distribution from compensation claims data through parametric and non-parametric modeling and Monte Carlo simulations. The loss distribution can be estimated both on the whole dataset and, thanks to the application of a Bayesian hierarchical model, on stratified data. The approach allows to quantitatively assessing the risk structure of the HCO by analyzing the loss distribution and deriving its expected value and percentiles. We applied the proposed method to 206 cases of injuries with compensation requests collected from 1999 to the first semester of 2007 by the HCO of Lodi, in the Northern part of Italy. We computed the risk indexes taking into account the different clinical departments and the different hospitals involved. The approach proved to be useful to understand the HCO risk structure in terms of frequency, severity, expected and unexpected loss related to adverse events.

The generalized Morse wavelet method to determine refractive index dispersion of dielectric films

NASA Astrophysics Data System (ADS)

Kocahan, Özlem; Özcan, Seçkin; Coşkun, Emre; Özder, Serhat

2017-04-01

The continuous wavelet transform (CWT) method is a useful tool for the determination of refractive index dispersion of dielectric films. Mother wavelet selection is an important factor for the accuracy of the results when using CWT. In this study, generalized Morse wavelet (GMW) was proposed as the mother wavelet because of having two degrees of freedom. The simulation studies, based on error calculations and Cauchy Coefficient comparisons, were presented and also the noisy signal was tested by CWT method with GMW. The experimental validity of this method was checked by D263 T schott glass having 100 μm thickness and the results were compared to those from the catalog value.

Reflective random indexing for semi-automatic indexing of the biomedical literature.

PubMed

Vasuki, Vidya; Cohen, Trevor

2010-10-01

The rapid growth of biomedical literature is evident in the increasing size of the MEDLINE research database. Medical Subject Headings (MeSH), a controlled set of keywords, are used to index all the citations contained in the database to facilitate search and retrieval. This volume of citations calls for efficient tools to assist indexers at the US National Library of Medicine (NLM). Currently, the Medical Text Indexer (MTI) system provides assistance by recommending MeSH terms based on the title and abstract of an article using a combination of distributional and vocabulary-based methods. In this paper, we evaluate a novel approach toward indexer assistance by using nearest neighbor classification in combination with Reflective Random Indexing (RRI), a scalable alternative to the established methods of distributional semantics. On a test set provided by the NLM, our approach significantly outperforms the MTI system, suggesting that the RRI approach would make a useful addition to the current methodologies.

Speeding Up Chemical Searches Using the Inverted Index: the Convergence of Chemoinformatics and Text Search Methods

PubMed Central

Nasr, Ramzi; Vernica, Rares; Li, Chen; Baldi, Pierre

2012-01-01

In ligand-based screening, retrosynthesis, and other chemoinformatics applications, one of-ten seeks to search large databases of molecules in order to retrieve molecules that are similar to a given query. With the expanding size of molecular databases, the efficiency and scalability of data structures and algorithms for chemical searches are becoming increasingly important. Remarkably, both the chemoinformatics and information retrieval communities have converged on similar solutions whereby molecules or documents are represented by binary vectors, or fingerprints, indexing their substructures such as labeled paths for molecules and n-grams for text, with the same Jaccard-Tanimoto similarity measure. As a result, similarity search methods from one field can be adapted to the other. Here we adapt recent, state-of-the-art, inverted index methods from information retrieval to speed up similarity searches in chemoinformatics. Our results show a several-fold speed-up improvement over previous methods for both thresh-old searches and top-K searches. We also provide a mathematical analysis that allows one to predict the level of pruning achieved by the inverted index approach, and validate the quality of these predictions through simulation experiments. All results can be replicated using data freely downloadable from http://cdb.ics.uci.edu/. PMID:22462644

Sleep Quality and Body Mass Index in College Students: The Role of Sleep Disturbances

ERIC Educational Resources Information Center

Vargas, Perla A.; Flores, Melissa; Robles, Elias

2014-01-01

Objective: Obesity and its comorbidities have emerged as a leading public health concern. The aim of this study was to explore the relationship between body mass index (BMI) and sleep patterns, including duration and disturbances. Methods: A convenience sample of 515 college students completed an online survey consisting of the Pittsburgh Sleep…

Comparison of Soil Quality Index Using Three Methods

PubMed Central

Mukherjee, Atanu; Lal, Rattan

2014-01-01

Assessment of management-induced changes in soil quality is important to sustaining high crop yield. A large diversity of cultivated soils necessitate identification development of an appropriate soil quality index (SQI) based on relative soil properties and crop yield. Whereas numerous attempts have been made to estimate SQI for major soils across the World, there is no standard method established and thus, a strong need exists for developing a user-friendly and credible SQI through comparison of various available methods. Therefore, the objective of this article is to compare three widely used methods to estimate SQI using the data collected from 72 soil samples from three on-farm study sites in Ohio. Additionally, challenge lies in establishing a correlation between crop yield versus SQI calculated either depth wise or in combination of soil layers as standard methodology is not yet available and was not given much attention to date. Predominant soils of the study included one organic (Mc), and two mineral (CrB, Ko) soils. Three methods used to estimate SQI were: (i) simple additive SQI (SQI-1), (ii) weighted additive SQI (SQI-2), and (iii) statistically modeled SQI (SQI-3) based on principal component analysis (PCA). The SQI varied between treatments and soil types and ranged between 0–0.9 (1 being the maximum SQI). In general, SQIs did not significantly differ at depths under any method suggesting that soil quality did not significantly differ for different depths at the studied sites. Additionally, data indicate that SQI-3 was most strongly correlated with crop yield, the correlation coefficient ranged between 0.74–0.78. All three SQIs were significantly correlated (r = 0.92–0.97) to each other and with crop yield (r = 0.65–0.79). Separate analyses by crop variety revealed that correlation was low indicating that some key aspects of soil quality related to crop response are important requirements for estimating SQI. PMID:25148036

Retrospective indexing (RI) - A computer-aided indexing technique

NASA Technical Reports Server (NTRS)

Buchan, Ronald L.

1990-01-01

An account is given of a method for data base-updating designated 'computer-aided indexing' (CAI) which has been very efficiently implemented at NASA's Scientific and Technical Information Facility by means of retrospective indexing. Novel terms added to the NASA Thesaurus will therefore proceed directly into both the NASA-RECON aerospace information system and its portion of the ESA-Information Retrieval Service, giving users full access to material thus indexed. If a given term appears in the title of a record, it is given special weight. An illustrative graphic representation of the CAI search strategy is presented.

Fine-Grained Indexing of the Biomedical Literature: MeSH Subheading Attachment for a MEDLINE Indexing Tool

PubMed Central

Névéol, Aurélie; Shooshan, Sonya E.; Mork, James G.; Aronson, Alan R.

2007-01-01

Objective This paper reports on the latest results of an Indexing Initiative effort addressing the automatic attachment of subheadings to MeSH main headings recommended by the NLM’s Medical Text Indexer. Material and Methods Several linguistic and statistical approaches are used to retrieve and attach the subheadings. Continuing collaboration with NLM indexers also provided insight on how automatic methods can better enhance indexing practice. Results The methods were evaluated on corpus of 50,000 MEDLINE citations. For main heading/subheading pair recommendations, the best precision is obtained with a post-processing rule method (58%) while the best recall is obtained by pooling all methods (64%). For stand-alone subheading recommendations, the best performance is obtained with the PubMed Related Citations algorithm. Conclusion Significant progress has been made in terms of subheading coverage. After further evaluation, some of this work may be integrated in the MEDLINE indexing workflow. PMID:18693897

CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data.

PubMed

Goodacre, Charles J; Garbacea, Antoanela; Naylor, W Patrick; Daher, Tony; Marchack, Christopher B; Lowry, Jean

2012-01-01

The clinical impression procedures described in this article provide a method of recording the morphology of the intaglio and cameo surfaces of complete denture bases and also identify muscular and phonetic locations for the prosthetic teeth. When the CAD/CAM technology for fabricating complete dentures becomes commercially available, it will be possible to scan the denture base morphology and tooth positions recorded with this technique and import those data into a virtual tooth arrangement program where teeth can be articulated and then export the data to a milling device for the fabrication of the complete dentures. A prototype 3-D tooth arrangement program is described in this article that serves as an example of the type of program than can be used to arrange prosthetic teeth virtually as part of the overall CAD/CAM fabrication of complete dentures. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Effect of the refractive index on the hawking temperature: an application of the Hamilton-Jacobi method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sakalli, I., E-mail: izzet.sakalli@emu.edu.tr; Mirekhtiary, S. F., E-mail: fatemeh.mirekhtiary@emu.edu.tr

2013-10-15

Hawking radiation of a non-asymptotically flat 4-dimensional spherically symmetric and static dilatonic black hole (BH) via the Hamilton-Jacobi (HJ) method is studied. In addition to the naive coordinates, we use four more different coordinate systems that are well-behaved at the horizon. Except for the isotropic coordinates, direct computation by the HJ method leads to the standard Hawking temperature for all coordinate systems. The isotropic coordinates allow extracting the index of refraction from the Fermat metric. It is explicitly shown that the index of refraction determines the value of the tunneling rate and its natural consequence, the Hawking temperature. The isotropicmore » coordinates in the conventional HJ method produce a wrong result for the temperature of the linear dilaton. Here, we explain how this discrepancy can be resolved by regularizing the integral possessing a pole at the horizon.« less

The index gage method to develop a flow duration curve from short-term streamflow records

NASA Astrophysics Data System (ADS)

Zhang, Zhenxing

2017-10-01

The flow duration curve (FDC) is one of the most commonly used graphical tools in hydrology and provides a comprehensive graphical view of streamflow variability at a particular site. For a gaged site, an FDC can be easily estimated with frequency analysis. When no streamflow records are available, regional FDCs are used to synthesize FDCs. However, studies on how to develop FDCs for sites with short-term records have been very limited. Deriving representative FDC when there are short-term hydrologic records is important. For instance, 43% of the 394 streamflow gages in Illinois have records of 20 years or fewer, and these short-term gages are often distributed in headwaters and contain valuable hydrologic information. In this study, the index gage method is proposed to develop FDCs using short-term hydrologic records via an information transfer technique from a nearby hydrologically similar index gage. There are three steps: (1) select an index gage; (2) determine changes of FDC; and (3) develop representative FDCs. The approach is tested using records from 92 U.S. Geological Survey streamflow gages in Illinois. A jackknife experiment is conducted to assess the performance. Bootstrap resampling is used to simulate various periods of records, i.e., 1, 2, 5, 10, 15, and 20 years of records. The results demonstrated that the index gage method is capable of developing a representative FDC using short-term records. Generally, the approach performance is improved when more hydrologic records are available, but the improvement appears to level off when the short-term gage has 10 years or more records.

New generic indexing technology

NASA Technical Reports Server (NTRS)

Freeston, Michael

1996-01-01

There has been no fundamental change in the dynamic indexing methods supporting database systems since the invention of the B-tree twenty-five years ago. And yet the whole classical approach to dynamic database indexing has long since become inappropriate and increasingly inadequate. We are moving rapidly from the conventional one-dimensional world of fixed-structure text and numbers to a multi-dimensional world of variable structures, objects and images, in space and time. But, even before leaving the confines of conventional database indexing, the situation is highly unsatisfactory. In fact, our research has led us to question the basic assumptions of conventional database indexing. We have spent the past ten years studying the properties of multi-dimensional indexing methods, and in this paper we draw the strands of a number of developments together - some quite old, some very new, to show how we now have the basis for a new generic indexing technology for the next generation of database systems.

Improved Body Mass Index Measures Following a Middle School-Based Obesity Intervention--The MATCH Program

ERIC Educational Resources Information Center

Lazorick, Suzanne; Fang, Xiangming; Hardison, George T.; Crawford, Yancey

2015-01-01

Background: Motivating Adolescents with Technology to CHOOSE Health™ (MATCH) is an educational and behavioral intervention in seventh grade. Methods: Teachers in 2 schools delivered the MATCH curriculum, with 1 control school. Using a quasi-experimental design, outcome measures included lessons completed, body mass index (BMI), BMI z-score (zBMI),…

Comparison of Document Index Graph Using TextRank and HITS Weighting Method in Automatic Text Summarization

NASA Astrophysics Data System (ADS)

Hadyan, Fadhlil; Shaufiah; Arif Bijaksana, Moch.

2017-01-01

Automatic summarization is a system that can help someone to take the core information of a long text instantly. The system can help by summarizing text automatically. there’s Already many summarization systems that have been developed at this time but there are still many problems in those system. In this final task proposed summarization method using document index graph. This method utilizes the PageRank and HITS formula used to assess the web page, adapted to make an assessment of words in the sentences in a text document. The expected outcome of this final task is a system that can do summarization of a single document, by utilizing document index graph with TextRank and HITS to improve the quality of the summary results automatically.

Fine-grained indexing of the biomedical literature: MeSH subheading attachment for a MEDLINE indexing tool.

PubMed

Névéol, Aurélie; Shooshan, Sonya E; Mork, James G; Aronson, Alan R

2007-10-11

This paper reports on the latest results of an Indexing Initiative effort addressing the automatic attachment of subheadings to MeSH main headings recommended by the NLM's Medical Text Indexer. Several linguistic and statistical approaches are used to retrieve and attach the subheadings. Continuing collaboration with NLM indexers also provided insight on how automatic methods can better enhance indexing practice. The methods were evaluated on corpus of 50,000 MEDLINE citations. For main heading/subheading pair recommendations, the best precision is obtained with a post-processing rule method (58%) while the best recall is obtained by pooling all methods (64%). For stand-alone subheading recommendations, the best performance is obtained with the PubMed Related Citations algorithm. Significant progress has been made in terms of subheading coverage. After further evaluation, some of this work may be integrated in the MEDLINE indexing workflow.

Index to the Understanding the Atom Series.

ERIC Educational Resources Information Center

Atomic Energy Commission, Oak Ridge, TN. Div. of Technical Information.

This index was prepared for the set of 51 booklets in the "Understanding the Atom Series" published by the U. S. Atomic Energy Commission for high school students and their teachers. In addition to the index, a complete list of the series is provided in which the booklets are grouped into the categories of physics, chemistry, biology, nuclear…

A Multi-Index Integrated Change detection method for updating the National Land Cover Database

USGS Publications Warehouse

Jin, Suming; Yang, Limin; Xian, George Z.; Danielson, Patrick; Homer, Collin G.

2010-01-01

Land cover change is typically captured by comparing two or more dates of imagery and associating spectral change with true thematic change. A new change detection method, Multi-Index Integrated Change (MIIC), has been developed to capture a full range of land cover disturbance patterns for updating the National Land Cover Database (NLCD). Specific indices typically specialize in identifying only certain types of disturbances; for example, the Normalized Burn Ratio (NBR) has been widely used for monitoring fire disturbance. Recognizing the potential complementary nature of multiple indices, we integrated four indices into one model to more accurately detect true change between two NLCD time periods. The four indices are NBR, Normalized Difference Vegetation Index (NDVI), Change Vector (CV), and a newly developed index called the Relative Change Vector (RCV). The model is designed to provide both change location and change direction (e.g. biomass increase or biomass decrease). The integrated change model has been tested on five image pairs from different regions exhibiting a variety of disturbance types. Compared with a simple change vector method, MIIC can better capture the desired change without introducing additional commission errors. The model is particularly accurate at detecting forest disturbances, such as forest harvest, forest fire, and forest regeneration. Agreement between the initial change map areas derived from MIIC and the retained final land cover type change areas will be showcased from the pilot test sites.

Application of the BMWP-Costa Rica biotic index in aquatic biomonitoring: sensitivity to collection method and sampling intensity.

PubMed

Gutiérrez-Fonseca, Pablo E; Lorion, Christopher M

2014-04-01

The use of aquatic macroinvertebrates as bio-indicators in water quality studies has increased considerably over the last decade in Costa Rica, and standard biomonitoring methods have now been formulated at the national level. Nevertheless, questions remain about the effectiveness of different methods of sampling freshwater benthic assemblages, and how sampling intensity may influence biomonitoring results. In this study, we compared the results of qualitative sampling using commonly applied methods with a more intensive quantitative approach at 12 sites in small, lowland streams on the southern Caribbean slope of Costa Rica. Qualitative samples were collected following the official protocol using a strainer during a set time period and macroinvertebrates were field-picked. Quantitative sampling involved collecting ten replicate Surber samples and picking out macroinvertebrates in the laboratory with a stereomicroscope. The strainer sampling method consistently yielded fewer individuals and families than quantitative samples. As a result, site scores calculated using the Biological Monitoring Working Party-Costa Rica (BMWP-CR) biotic index often differed greatly depending on the sampling method. Site water quality classifications using the BMWP-CR index differed between the two sampling methods for 11 of the 12 sites in 2005, and for 9 of the 12 sites in 2006. Sampling intensity clearly had a strong influence on BMWP-CR index scores, as well as perceived differences between reference and impacted sites. Achieving reliable and consistent biomonitoring results for lowland Costa Rican streams may demand intensive sampling and requires careful consideration of sampling methods.

INDEXABILITY AND OPTIMAL INDEX POLICIES FOR A CLASS OF REINITIALISING RESTLESS BANDITS.

PubMed

Villar, Sofía S

2016-01-01

Motivated by a class of Partially Observable Markov Decision Processes with application in surveillance systems in which a set of imperfectly observed state processes is to be inferred from a subset of available observations through a Bayesian approach, we formulate and analyze a special family of multi-armed restless bandit problems. We consider the problem of finding an optimal policy for observing the processes that maximizes the total expected net rewards over an infinite time horizon subject to the resource availability. From the Lagrangian relaxation of the original problem, an index policy can be derived, as long as the existence of the Whittle index is ensured. We demonstrate that such a class of reinitializing bandits in which the projects' state deteriorates while active and resets to its initial state when passive until its completion possesses the structural property of indexability and we further show how to compute the index in closed form. In general, the Whittle index rule for restless bandit problems does not achieve optimality. However, we show that the proposed Whittle index rule is optimal for the problem under study in the case of stochastically heterogenous arms under the expected total criterion, and it is further recovered by a simple tractable rule referred to as the 1-limited Round Robin rule. Moreover, we illustrate the significant suboptimality of other widely used heuristic: the Myopic index rule, by computing in closed form its suboptimality gap. We present numerical studies which illustrate for the more general instances the performance advantages of the Whittle index rule over other simple heuristics.

INDEXABILITY AND OPTIMAL INDEX POLICIES FOR A CLASS OF REINITIALISING RESTLESS BANDITS

PubMed Central

Villar, Sofía S.

2016-01-01

Motivated by a class of Partially Observable Markov Decision Processes with application in surveillance systems in which a set of imperfectly observed state processes is to be inferred from a subset of available observations through a Bayesian approach, we formulate and analyze a special family of multi-armed restless bandit problems. We consider the problem of finding an optimal policy for observing the processes that maximizes the total expected net rewards over an infinite time horizon subject to the resource availability. From the Lagrangian relaxation of the original problem, an index policy can be derived, as long as the existence of the Whittle index is ensured. We demonstrate that such a class of reinitializing bandits in which the projects’ state deteriorates while active and resets to its initial state when passive until its completion possesses the structural property of indexability and we further show how to compute the index in closed form. In general, the Whittle index rule for restless bandit problems does not achieve optimality. However, we show that the proposed Whittle index rule is optimal for the problem under study in the case of stochastically heterogenous arms under the expected total criterion, and it is further recovered by a simple tractable rule referred to as the 1-limited Round Robin rule. Moreover, we illustrate the significant suboptimality of other widely used heuristic: the Myopic index rule, by computing in closed form its suboptimality gap. We present numerical studies which illustrate for the more general instances the performance advantages of the Whittle index rule over other simple heuristics. PMID:27212781

GLACiAR: GaLAxy survey Completeness AlgoRithm

NASA Astrophysics Data System (ADS)

Carrasco, Daniela; Trenti, Michele; Mutch, Simon; Oesch, Pascal

2018-05-01

GLACiAR (GaLAxy survey Completeness AlgoRithm) estimates the completeness and selection functions in galaxy surveys. Tailored for multiband imaging surveys aimed at searching for high-redshift galaxies through the Lyman Break technique, the code can nevertheless be applied broadly. GLACiAR generates artificial galaxies that follow Sérsic profiles with different indexes and with customizable size, redshift and spectral energy distribution properties, adds them to input images, and measures the recovery rate.

Experimental comparison between speech transmission index, rapid speech transmission index, and speech intelligibility index.

PubMed

Larm, Petra; Hongisto, Valtteri

2006-02-01

During the acoustical design of, e.g., auditoria or open-plan offices, it is important to know how speech can be perceived in various parts of the room. Different objective methods have been developed to measure and predict speech intelligibility, and these have been extensively used in various spaces. In this study, two such methods were compared, the speech transmission index (STI) and the speech intelligibility index (SII). Also the simplification of the STI, the room acoustics speech transmission index (RASTI), was considered. These quantities are all based on determining an apparent speech-to-noise ratio on selected frequency bands and summing them using a specific weighting. For comparison, some data were needed on the possible differences of these methods resulting from the calculation scheme and also measuring equipment. Their prediction accuracy was also of interest. Measurements were made in a laboratory having adjustable noise level and absorption, and in a real auditorium. It was found that the measurement equipment, especially the selection of the loudspeaker, can greatly affect the accuracy of the results. The prediction accuracy of the RASTI was found acceptable, if the input values for the prediction are accurately known, even though the studied space was not ideally diffuse.

Methods, systems and apparatus for adjusting modulation index to improve linearity of phase voltage commands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallegos-Lopez, Gabriel; Perisic, Milun; Kinoshita, Michael H.

2017-03-14

Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a motor drive system. The disclosed embodiments provide a mechanism for adjusting modulation index of voltage commands to improve linearity of the voltage commands.

Modern methods of experimental construction of texture complete direct pole figures by using X-ray data

NASA Astrophysics Data System (ADS)

Isaenkova, M.; Perlovich, Yu; Fesenko, V.

2016-04-01

Currently used methods for constructing texture complete direct pole figure (CDPF) based on the results of X-ray diffractometric measurements were considered with respect to the products of Zr-based alloys and, in particular, used in a nuclear reactor cladding tubes, for which the accuracy of determination of integral texture parameters is of the especial importance. The main attention was devoted to technical issues which are solved by means of computer processing of large arrays of obtained experimental data. Among considered questions there are amendments of the defocusing, techniques for constructing of complete direct pole figures and determination of integral textural parameters. The methods of reconstruction of complete direct pole figures by partial direct pole figures recorded up to tilt angles of sample ψ=70-80°: the method of extrapolation of data to an uninvestigated region of the stereographic projection, and the method of "sewing" of partial pole figures measured for three mutually perpendicular plane sections of the product. The limits of applicability of these methods, depending on the shape of the test product and the degree of inhomogeneity of the layer-by-layer texture, were revealed. On the basis of a large number of experimental data, the accuracy of the integral parameters used for calculation of the physical and mechanical properties of metals with a hexagonal crystal structure was found to be equal to 0.02, when taking into account the texture heterogeneity of regular products from Zr-based alloys.

Developing a Climate-Induced Social Vulnerability Index for Urban Areas: A Case Study of East Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Omitaomu, Olufemi A.; Carvalhaes, Thomaz M.

Census American Community Survey 2008-2012 data are used to construct a spatially explicit Climate-Induced Social Vulnerability Index (CSVI) for the East Tennessee area. This CSVI is a combination of a Social Vulnerability Index (SVI) and a Climate Index. A method is replicated and adapted to derive a custom SVI by Census tract for the counties participating in the East Tennessee Index, and a Climate Index is developed for the same area based on indicators for climate hazards. The resulting datasets are exported as a raster to be integrated and combined within the Urban Climate Adaptation Tool (Urban-CAT) to act asmore » an indicator for communities which may be differentially vulnerable to changes in climate. Results for the SVI are mapped separately from the complete CSVI in this document as results for the latter are in development.« less

The long-run dynamic relationship between exchange rate and its attention index: Based on DCCA and TOP method

NASA Astrophysics Data System (ADS)

Wang, Xuan; Guo, Kun; Lu, Xiaolin

2016-07-01

The behavior information of financial market plays a more and more important role in modern economic system. The behavior information reflected in INTERNET search data has already been used in short-term prediction for exchange rate, stock market return, house price and so on. However, the long-run relationship between behavior information and financial market fluctuation has not been studied systematically. Further, most traditional statistic methods and econometric models could not catch the dynamic and non-linear relationship. An attention index of CNY/USD exchange rate is constructed based on search data from 360 search engine of China in this paper. Then the DCCA and Thermal Optimal Path methods are used to explore the long-run dynamic relationship between CNY/USD exchange rate and the corresponding attention index. The results show that the significant interdependency exists and the change of exchange rate is 1-2 days lag behind the attention index.

Income-related inequality in completed suicide across the provinces of Iran.

PubMed

Kazemi-Galougahi, Mohammad Hassan; Mansouri, Asieh; Akbarpour, Samaneh; Bakhtiyari, Mahmood; Sartipi, Majid; Moradzadeh, Rahmatollah

2018-01-01

The aim of this study was to measure income-related inequality in completed suicide across the provinces of Iran. This ecological study was performed using data from the Urban and Rural Household Income and Expenditure Survey-2010 conducted by the Iranian Center of Statistics, along with data on completed suicide from the Iranian Legal Medicine Organization in 2012. We calculated the Gini coefficient of per capita income and the completed suicide rate, as well as the concentration index for per capita income inequality in completed suicide, across the provinces of Iran. The Gini coefficients of per capita income and the completed suicide rate in the provinces of Iran were 0.10 (95% confidence interval [CI], 0.06 to 0.13) and 0.34 (95% CI, 0.21 to 0.46), respectively. We found a trivial decreasing trend in the completed suicide incidence rate according to income quintile. The poorest-to-richest ratio in the completed suicide rate was 2.01 (95% CI, 1.26 to 3.22). The concentration index of completed suicide in the provinces of Iran was -0.12 (95% CI, -0.30 to 0.06). This study found that lower income might be considered as a risk factor for completed suicide. Nonetheless, further individual studies incorporating multivariable analysis and repeated cross-sectional data would allow a more fine-grained analysis of this phenomenon.

Center index method-an alternative for wear measurements with radiostereometry (RSA).

PubMed

Dahl, Jon; Figved, Wender; Snorrason, Finnur; Nordsletten, Lars; Röhrl, Stephan M

2013-03-01

Radiostereometry (RSA) is considered to be the most precise and accurate method for wear-measurements in total hip replacement. Post-operative stereoradiographs has so far been necessary for wear measurement. Hence, the use of RSA has been limited to studies planned for RSA measurements. We compared a new RSA method for wear measurements that does not require previous radiographs with conventional RSA. Instead of comparing present stereoradiographs with post-operative ones, we developed a method for calculating the post-operative position of the center of the femoral head on the present examination and using this as the index measurement. We compared this alternative method to conventional RSA in 27 hips in an ongoing RSA study. We found a high degree of agreement between the methods for both mean proximal (1.19 mm vs. 1.14 mm) and mean 3D wear (1.52 mm vs. 1.44 mm) after 10 years. Intraclass correlation coefficients (ICC) were 0.958 and 0.955, respectively (p<0.001 for both ICCs). The results were also within the limits of agreement when plotted subject-by-subject in a Bland-Altman plot. Our alternative method for wear measurements with RSA offers comparable results to conventional RSA measurements. It allows precise wear measurements without previous radiological examinations. Copyright © 2012 Orthopaedic Research Society.

Performance index and meta-optimization of a direct search optimization method

NASA Astrophysics Data System (ADS)

Krus, P.; Ölvander, J.

2013-10-01

Design optimization is becoming an increasingly important tool for design, often using simulation as part of the evaluation of the objective function. A measure of the efficiency of an optimization algorithm is of great importance when comparing methods. The main contribution of this article is the introduction of a singular performance criterion, the entropy rate index based on Shannon's information theory, taking both reliability and rate of convergence into account. It can also be used to characterize the difficulty of different optimization problems. Such a performance criterion can also be used for optimization of the optimization algorithms itself. In this article the Complex-RF optimization method is described and its performance evaluated and optimized using the established performance criterion. Finally, in order to be able to predict the resources needed for optimization an objective function temperament factor is defined that indicates the degree of difficulty of the objective function.

Universal Index System

NASA Technical Reports Server (NTRS)

Kelley, Steve; Roussopoulos, Nick; Sellis, Timos; Wallace, Sarah

1993-01-01

The Universal Index System (UIS) is an index management system that uses a uniform interface to solve the heterogeneity problem among database management systems. UIS provides an easy-to-use common interface to access all underlying data, but also allows different underlying database management systems, storage representations, and access methods.

A Simple Accurate Alternative to the Minimum-Deviation Method for the Determination of the Refractive Index of a Prism.

ERIC Educational Resources Information Center

Waldenstrom, S.; Naqvi, K. Razi

1978-01-01

Proposes an alternative to the classical minimum-deviation method for determining the refractive index of a prism. This new "fixed angle of incidence method" may find applications in research. (Author/GA)

A retrospective evaluation method for in vitro mammalian genotoxicity tests using cytotoxicity index transformation formulae.

PubMed

Fujita, Yurika; Kasamatsu, Toshio; Ikeda, Naohiro; Nishiyama, Naohiro; Honda, Hiroshi

2016-01-15

Although in vitro chromosomal aberration tests and micronucleus tests have been widely used for genotoxicity evaluation, false-positive results have been reported under strong cytotoxic conditions. To reduce false-positive results, the new Organization for Economic Co-operation and Development (OECD) test guideline (TG) recommends the use of a new cytotoxicity index, relative increase in cell count or relative population doubling (RICC/RPD), instead of the traditionally used index, relative cell count (RCC). Although the use of the RICC/RPD may result in different outcomes and require re-evaluation of tested substances, it is impractical to re-evaluate all existing data. Therefore, we established a method to estimate test results from existing RCC data. First, we developed formulae to estimate RICC/RPD from RCC without cell counts by considering cell doubling time and experiment time. Next, the accuracy of the cytotoxicity index transformation formulae was verified by comparing estimated RICC/RPD and measured RICC/RPD for 3 major chemicals associated with false-positive genotoxicity test results: ethyl acrylate, eugenol and p-nitrophenol. Moreover, 25 compounds with false-positive in vitro chromosomal aberration (CA) test results were re-evaluated to establish a retrospective evaluation method based on derived estimated RICC/RPD values. The estimated RICC/RPD values were in good agreement with the measured RICC/RPD values for every concentration and chemical, and the estimated RICC suggested the possibility that 12 chemicals (48%) with previously judged false-positive results in fact had negative results. Our method enables transformation of RCC data into RICC/RPD values with a high degree of accuracy and will facilitate comprehensive retrospective evaluation of test results. Copyright © 2015 Elsevier B.V. All rights reserved.

Machine-Aided Indexing. Technical Progress Report for Period January 1967-June 1969.

ERIC Educational Resources Information Center

Klingbiel, Paul H.

Working toward the goal of an automatic indexing system which is truly competitive with human indexing in cost, time and comprehensiveness the Machine-Aided Indexing (MAI) process was developed at the Defense Documentation Center (DDC). This indexing process uses linguistic techniques but does not require complete syntactic analysis of sentences…

A new insight into male fertility preservation for patients with completely immotile spermatozoa.

PubMed

Chen, Huanhua; Feng, Guixue; Zhang, Bo; Zhou, Hong; Wang, Caizhu; Shu, Jinhui; Gan, Xianyou; Lin, Ruoyun; Huang, Dongmei; Huang, Yingqin

2017-09-18

Sperm cryopreservation is the most effective method to preserve male fertility but this is normally used for motile spermatozoa. Thus, only motile spermatozoa are used for cryopreservation in most reproductive medicine centers worldwide. The immotile spermatozoa from some problematic patients are usually discarded, resulting in a missed opportunity of sterility cryopreservation for future assisted reproductive treatments. Many studies have shown that successful fertilization can be obtained after selection of viable sperm from the completely immotile spermatozoa before ICSI. Whether the completely immotile spermatozoa are worth of freezing has not been realized The aim of this study is to explore the clinical value of cryopreservation of immotile spermatozoa. Completely immotile spermatozoa were collected and frozen, and subsequently viable but immotile frozen-thawed spermatozoa were selected by laser plus for ICSI. Main outcomes included spermatozoa survival index, fertilization rate and good quality embryo rate. After identification by laser, the fresh samples of spermatozoa presented with a mean survival rate of 54.86% and 26.05%, and this was reduced to 44.13% and 18.13% in frozen-thawed spermatozoa samples, which showed a frozen-thawed spermatozoa survival index of 0.80 and 0.70 in the testicular and ejaculate sperm, respectively. There were no statistically differences in fertilization rate (80% vs80.51%, 75.00% vs 81.48%), cleavage rate (95.45% vs 98.95%, 100.00% vs 95.45%) and good quality embryo rate (40.48% vs 52.13%, 33.33%vs38.10%) between the frozen-thawed immotile spermatozoa group and the routine fresh immotile spermatozoa ICSI group in both testicular and ejaculate sperm, respectively. The results of the study show that completely immotile spermatozoa can be frozen in order to preserve male fertility as long as viable spermatozoa are present. This procedure provides a further possibility for fertility preservation for patients with completely

Matrix completion by deep matrix factorization.

PubMed

Fan, Jicong; Cheng, Jieyu

2018-02-01

Conventional methods of matrix completion are linear methods that are not effective in handling data of nonlinear structures. Recently a few researchers attempted to incorporate nonlinear techniques into matrix completion but there still exists considerable limitations. In this paper, a novel method called deep matrix factorization (DMF) is proposed for nonlinear matrix completion. Different from conventional matrix completion methods that are based on linear latent variable models, DMF is on the basis of a nonlinear latent variable model. DMF is formulated as a deep-structure neural network, in which the inputs are the low-dimensional unknown latent variables and the outputs are the partially observed variables. In DMF, the inputs and the parameters of the multilayer neural network are simultaneously optimized to minimize the reconstruction errors for the observed entries. Then the missing entries can be readily recovered by propagating the latent variables to the output layer. DMF is compared with state-of-the-art methods of linear and nonlinear matrix completion in the tasks of toy matrix completion, image inpainting and collaborative filtering. The experimental results verify that DMF is able to provide higher matrix completion accuracy than existing methods do and DMF is applicable to large matrices. Copyright © 2017 Elsevier Ltd. All rights reserved.

The impact of specialized physiotherapy methods on BODE index in COPD patients during hospitalization.

PubMed

Kurzaj, Monika; Wierzejski, Władysław; Dor, Anna; Stawska, Jolanta; Rożek, Krystyna

2013-01-01

To evaluate the effectiveness of specialized physiotherapy methods measured by the BODE index in patients with COPD during hospitalization. The study was conducted on a group of 30 patients diagnosed with COPD, all under treatment at the clinical hospital in Wroclaw due to the exacerbation of their symptoms. All patients were undergoing standard pharmacological treatment along with basic physiotherapy. The subjects of the study were randomly divided between an experimental group of 20 persons and a control group of 10 persons. Patients in the experimental group underwent a series of 6 additional massage treatments performed over a period of a few days, aimed at reshaping the following muscles: the sterno-cleidomastoid, pectoralis major, pectoralis minor, trapezius, levator scapulae, rhomboids and serratus anterior. Each massage lasted for 30 minutes and consisted of stroking, grinding, vibration and kneading techniques. Before and after therapy the patients were assessed based on the BODE index. First, the patient's BMI was calculated (B). Airflow obstruction (O) was determined by the percentage value of FEV1 while the MRC scale was used to evaluate a patient's dyspnea (D). Exercise capacity (E) was measured by the distance a patient could cover in a 6-minute walk test. Each variable of the BODE index was ranked on a scale from 0 to 3 points except the BMI, for which was given either 0 or 1 point. Analysis of the results showed a significant improvement of the BODE index in the experimental group while in the control group this ratio changed slightly. The FEV1 and MRC parameters changed significantly only in the experimental group. After a week of therapy the BODE index improved in both groups, but in the experimental group there was a significantly higher difference. In the experimental group all BODE components except BMI improved highly significantly, whereas in the control group only exercise capacity was significantly improved.

LEAF AREA INDEX (LAI) CHANGE DETECTION ON LOBLOLLY PINE FOREST STANDS WITH COMPLETE UNDERSTORY REMOVAL

EPA Science Inventory

The confounding effect of understory vegetation contributions to satellite derived
estimates of leaf area index (LAI) was investigated on two loblolly pine (Pinus taeda) forest stands located in the southeastern United States. Previous studies have shown that understory can a...

LEAF AREA INDEX (LAI) CHANGE DETECTION ON LOBLOLLY PINE FOREST STANDS WITH COMPLETE UNDERSTORY REMOVAL

EPA Science Inventory

The confounding effect of understory vegetation contributions to satellite derived estimates of leaf area index (LAI) was investigated on two loblolly pine forest stands located in the southeastern United States. Previous studies have shown that understory can account from 0-40%...

Rock Drilling Performance Evaluation by an Energy Dissipation Based Rock Brittleness Index

NASA Astrophysics Data System (ADS)

Munoz, H.; Taheri, A.; Chanda, E. K.

2016-08-01

To reliably estimate drilling performance both tool-rock interaction laws along with a proper rock brittleness index are required to be implemented. In this study, the performance of a single polycrystalline diamond compact (PDC) cutter cutting and different drilling methods including PDC rotary drilling, roller-cone rotary drilling and percussive drilling were investigated. To investigate drilling performance by rock strength properties, laboratory PDC cutting tests were performed on different rocks to obtain cutting parameters. In addition, results of laboratory and field drilling on different rocks found elsewhere in literature were used. Laboratory and field cutting and drilling test results were coupled with values of a new rock brittleness index proposed herein and developed based on energy dissipation withdrawn from the complete stress-strain curve in uniaxial compression. To quantify cutting and drilling performance, the intrinsic specific energy in rotary-cutting action, i.e. the energy consumed in pure cutting action, and drilling penetration rate values in percussive action were used. The results show that the new energy-based brittleness index successfully describes the performance of different cutting and drilling methods and therefore is relevant to assess drilling performance for engineering applications.

Determination of laser cutting process conditions using the preference selection index method

NASA Astrophysics Data System (ADS)

Madić, Miloš; Antucheviciene, Jurgita; Radovanović, Miroslav; Petković, Dušan

2017-03-01

Determination of adequate parameter settings for improvement of multiple quality and productivity characteristics at the same time is of great practical importance in laser cutting. This paper discusses the application of the preference selection index (PSI) method for discrete optimization of the CO2 laser cutting of stainless steel. The main motivation for application of the PSI method is that it represents an almost unexplored multi-criteria decision making (MCDM) method, and moreover, this method does not require assessment of the considered criteria relative significances. After reviewing and comparing the existing approaches for determination of laser cutting parameter settings, the application of the PSI method was explained in detail. Experiment realization was conducted by using Taguchi's L27 orthogonal array. Roughness of the cut surface, heat affected zone (HAZ), kerf width and material removal rate (MRR) were considered as optimization criteria. The proposed methodology is found to be very useful in real manufacturing environment since it involves simple calculations which are easy to understand and implement. However, while applying the PSI method it was observed that it can not be useful in situations where there exist a large number of alternatives which have attribute values (performances) very close to those which are preferred.

Kirchhoff Index of Cyclopolyacenes

NASA Astrophysics Data System (ADS)

Wang, Yan; Zhang, Wenwen

2010-10-01

The resistance distance between two vertices of a connected graph G is computed as the effective resistance between them in the corresponding network constructed from G by replacing each edge with a unit resistor. The Kirchhoff index of G is the sum of resistance distances between all pairs of vertices. In this paper, following the method of Y. J. Yang and H. P. Zhang in the proof of the Kirchhoff index of the linear hexagonal chain, we obtain the Kirchhoff index of cyclopolyacenes, denoted by HRn, in terms of its Laplacian spectrum. We show that the Kirchhoff index of HRnis approximately one third of its Wiener index.

Methods for comparing drug policies--the utility of composite drug harm indexes.

PubMed

Ritter, Alison

2009-11-01

One of the challenges for drug policy research is being able to compare policy options and outcomes. The development of indexes, such as the UK Drug Harm Index or the UNODC Illicit Drug Index is a way to systematically enable such comparisons. An Index is a single common metric that represents the diverse outcomes or consequences of drug use. An Index may be used for performance monitoring within one country/region over time; to establish societal benefit of drug policies as expressed in social costs saved; to compare countries or regions; or for comparative policy analysis. Clarity of purpose is important in how an Index is used. The consequences or outcomes that can be combined into a single Index include health consequences, crime consequences, public amenity, pain and suffering, labour market outcomes, and drug manufacture and trafficking activity. The choice of outcomes for inclusion is driven by the purpose but also often by practical considerations, such as data availability. The weighting of the consequences is an important consideration in translating the outcomes into a common metric. A monetary unit has a number of advantages: it is a unit that can be measured across diverse impacts; it gives implicit "weighting" of harms; and it is intuitive for policy makers and community. On the other hand, it represents an economic perspective. No one Index will be regarded as suitable and appropriate by every stakeholder and ongoing research effort on Indexes is an important foundational research activity to advance illicit drug policy.

n-Gram-Based Indexing for Korean Text Retrieval.

ERIC Educational Resources Information Center

Lee, Joon Ho; Cho, Hyun Yang; Park, Hyouk Ro

1999-01-01

Discusses indexing methods in Korean text retrieval and proposes a new indexing method based on n-grams which can handle compound nouns effectively without dictionaries and complex linguistic knowledge. Experimental results show that n-gram-based indexing is considerably faster than morpheme-based indexing, and also provides better retrieval…

An original method to determine complex refractive index of liquids by spectroscopic ellipsometry and illustrated applications

NASA Astrophysics Data System (ADS)

Stchakovsky, M.; Battie, Y.; Naciri, A. En

2017-11-01

We present a method to characterize optical properties of liquids by spectroscopic ellipsometry. The experiments use a specific liquid cell that avoids disturbance of waves at air-liquid interface and allows the determination of the real and the imaginary part of the refractive index, with a sensitivity of the latter below 10-4. The method is illustrated by results obtained with a spectroscopic phase modulation ellipsometer on several liquids such as deionised water, microscope oil and protein solution. Comparisons of the method with standard techniques are given.

Completed Research in Health, Physical Education and Recreation Including International Sources. Volume 22. 1980 Edition. Covering Research Completed in 1979.

ERIC Educational Resources Information Center

Rothstein, Anne L., Ed.; Nelson, Jack, Ed.

This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1979. It is arranged in three parts. Part one, the index, gives cross references for all the listings in parts two and three. References are arranged alphabetically under the subject headings. Part two contains a bibliography…

New method to determine the refractive index and the absorption coefficient of organic nonlinear crystals in the ultra-wideband THz region.

PubMed

Ohno, Seigo; Miyamoto, Katsuhiko; Minamide, Hiroaki; Ito, Hiromasa

2010-08-02

A method for simultaneously measuring the refractive index and absorption coefficient of nonlinear optical crystals in the ultra-wideband terahertz (THz) region is described. This method is based on the analysis of a collinear difference frequency generation (DFG) process using a tunable, dual-wavelength, optical parametric oscillator. The refractive index and the absorption coefficient in the organic nonlinear crystal DAST were experimentally determined in the frequency range 2.5-26.2 THz by measuring the THz-wave output using DFG. The resultant refractive index in the x-direction was approximately 2.3, while the absorption spectrum was in good agreement with FT-IR measurements. The output of the DAST-DFG THz-wave source was optimized to the phase-matching condition using the measured refractive index spectrum in THz region, which resulted in an improvement in the output power of up to a factor of nine.

Machine aided indexing from natural language text

NASA Technical Reports Server (NTRS)

Silvester, June P.; Genuardi, Michael T.; Klingbiel, Paul H.

1993-01-01

The NASA Lexical Dictionary (NLD) Machine Aided Indexing (MAI) system was designed to (1) reuse the indexing of the Defense Technical Information Center (DTIC); (2) reuse the indexing of the Department of Energy (DOE); and (3) reduce the time required for original indexing. This was done by automatically generating appropriate NASA thesaurus terms from either the other agency's index terms, or, for original indexing, from document titles and abstracts. The NASA STI Program staff devised two different ways to generate thesaurus terms from text. The first group of programs identified noun phrases by a parsing method that allowed for conjunctions and certain prepositions, on the assumption that indexable concepts are found in such phrases. Results were not always satisfactory, and it was noted that indexable concepts often occurred outside of noun phrases. The first method also proved to be too slow for the ultimate goal of interactive (online) MAI. The second group of programs used the knowledge base (KB), word proximity, and frequency of word and phrase occurrence to identify indexable concepts. Both methods are described and illustrated. Online MAI has been achieved, as well as several spinoff benefits, which are also described.

Evaluation of a flow cytometry method to determine size and real refractive index distributions in natural marine particle populations.

PubMed

Agagliate, Jacopo; Röttgers, Rüdiger; Twardowski, Michael S; McKee, David

2018-03-01

A flow cytometric (FC) method was developed to retrieve particle size distributions (PSDs) and real refractive index (n r ) information in natural waters. Geometry and signal response of the sensors within the flow cytometer (CytoSense, CytoBuoy b.v., Netherlands) were characterized to form a scattering inversion model based on Mie theory. The procedure produced a mesh of diameter and n r isolines where each particle is assigned the diameter and n r values of the closest node, producing PSDs and particle real refractive index distributions. The method was validated using polystyrene bead standards of known diameter and polydisperse suspensions of oil with known n r , and subsequently applied to natural samples collected across a broad range of UK shelf seas. FC PSDs were compared with independent PSDs produced from data of two LISST-100X instruments (type B and type C). PSD slopes and features were found to be consistent between the FC and the two LISST-100X instruments, but LISST concentrations were found in disagreement with FC concentrations and with each other. FC n r values were found to agree with expected refractive index values of typical marine particle components across all samples considered. The determination of particle size and refractive index distributions enabled by the FC method has potential to facilitate identification of the contribution of individual subpopulations to the bulk inherent optical properties and biogeochemical properties of the particle population.

Evaluation and Ranking of Researchers – Bh Index

PubMed Central

Bharathi, D. Gnana

2013-01-01

Evaluation and ranking of every author is very crucial as it is widely used to evaluate the performance of the researcher. This article proposes a new method, called Bh-Index, to evaluate the researchers based on the publications and citations. The method is built on h-Index and only the h-core articles are taken into consideration. The method assigns value additions to those articles that receive significantly high citations in comparison to the h-Index of the researcher. It provides a wide range of values for a given h-Index and effective evaluation even for a short period. Use of Bh-Index along with the h-Index gives a powerful tool to evaluate the researchers. PMID:24349183

Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method.

PubMed

Janeva, Nadica; Kovacevska, Gordana; Janev, Edvard

2017-10-15

The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.

Determination of the maximum-depth to potential field sources by a maximum structural index method

NASA Astrophysics Data System (ADS)

Fedi, M.; Florio, G.

2013-01-01

A simple and fast determination of the limiting depth to the sources may represent a significant help to the data interpretation. To this end we explore the possibility of determining those source parameters shared by all the classes of models fitting the data. One approach is to determine the maximum depth-to-source compatible with the measured data, by using for example the well-known Bott-Smith rules. These rules involve only the knowledge of the field and its horizontal gradient maxima, and are independent from the density contrast. Thanks to the direct relationship between structural index and depth to sources we work out a simple and fast strategy to obtain the maximum depth by using the semi-automated methods, such as Euler deconvolution or depth-from-extreme-points method (DEXP). The proposed method consists in estimating the maximum depth as the one obtained for the highest allowable value of the structural index (Nmax). Nmax may be easily determined, since it depends only on the dimensionality of the problem (2D/3D) and on the nature of the analyzed field (e.g., gravity field or magnetic field). We tested our approach on synthetic models against the results obtained by the classical Bott-Smith formulas and the results are in fact very similar, confirming the validity of this method. However, while Bott-Smith formulas are restricted to the gravity field only, our method is applicable also to the magnetic field and to any derivative of the gravity and magnetic field. Our method yields a useful criterion to assess the source model based on the (∂f/∂x)max/fmax ratio. The usefulness of the method in real cases is demonstrated for a salt wall in the Mississippi basin, where the estimation of the maximum depth agrees with the seismic information.

The Nurses' Well-Being Index and Factors Influencing This Index among Nurses in Central China: A Cross-Sectional Study.

PubMed

Meng, Runtang; Luo, Yi; Liu, Bing; Hu, Ying; Yu, Chuanhua

2015-01-01

A discussion and analysis of factors that contribute to nurses' happiness index can be useful in developing effective interventions to improve nurses' enthusiasm, sense of honor and pride and to improve the efficiency and quality of medical services. In this study, 206 registered nurses at the 2011 annual encounter for 12 Hanchuan hospitals completed a questionnaire survey that covered three aspects of the well-being index and thus served as a comprehensive well-being and general information tool. Based on their index score, the nurses' overall happiness level was moderate. The dimensions of the happiness index are listed in descending order of their contribution to the nurses' comprehensive happiness levels: health concerns, friendly relationships, self-worth, altruism, vitality, positive emotions, personality development, life satisfaction and negative emotions. Four variables (positive emotion, life satisfaction, negative emotions, and friendly relationships) jointly explained 47.80% of the total variance of the happiness index; positive emotions had the greatest impact on the happiness index. Appropriate nursing interventions can improve nurses' happiness index scores, thereby increasing nurses' motivation and promoting the development of their nursing practice.

Assessment of groundwater vulnerability in the Daule aquifer, Ecuador, using the susceptibility index method.

PubMed

Ribeiro, Luís; Pindo, Juan Carlos; Dominguez-Granda, Luis

2017-01-01

The Guayas region in Ecuador is economically very important, producing 68% of the national crops. The main agricultural activities threaten the groundwater therein with nitrate contamination given the large fertiliser and water needs. The present work tests the applicability of the susceptibility index assessment method in evaluating the impact of agricultural activities on groundwater quality, using as a case study an aquifer of the Guayas river basin in Ecuador. The index adapts four parameters of the DRASTIC method and incorporated a new land use parameter. Results show that the areas highly vulnerable to contamination are located in irrigation perimeters of dominant paddy fields associated with the high recharge rates in the alluvial deposits. Respectively, moderately vulnerable and low-vulnerability areas correspond to aquatic environments and forests, semi-natural zones and water bodies. One of the main contributions of the Daule aquifer vulnerability is likely its wide, flat topography. A great part of the aquifer is at high risk of contamination by nitrates if a code of good agricultural practices is not applied. Therefore the implementation of a monitoring network to control the nitrates concentrations is the first step to assure groundwater quality for drinking purposes. Copyright © 2016 Elsevier B.V. All rights reserved.

Semi automatic indexing of PostScript files using Medical Text Indexer in medical education.

PubMed

Mollah, Shamim Ara; Cimino, Christopher

2007-10-11

At Albert Einstein College of Medicine a large part of online lecture materials contain PostScript files. As the collection grows it becomes essential to create a digital library to have easy access to relevant sections of the lecture material that is full-text indexed; to create this index it is necessary to extract all the text from the document files that constitute the originals of the lectures. In this study we present a semi automatic indexing method using robust technique for extracting text from PostScript files and National Library of Medicine's Medical Text Indexer (MTI) program for indexing the text. This model can be applied to other medical schools for indexing purposes.

[Changes in index-F and index-delta 4P in normal pregnancy, labor and the puerperium].

PubMed

Kamada, T

1984-04-01

Index-F and index-delta 4P (cortisol and progesterone which are not bound to corticosteroid-binding globulin (CBG) in the umbilical cord vein and the maternal blood were determined during pregnancy, at delivery and puerperium. Index-F and index-delta 4P were calculated as the total cortisol or total progesterone X% unbound to CBG divided by 100. The level of index-F showed a gradual rise during pregnancy, and in late pregnancy reached about 1.5 times as high as that of non-pregnant women, whereas the total cortisol level was about 3.3 times. Near delivery, index-F was almost completely stable, but at delivery, it increased suddenly in proportion to the rise in the total cortisol level. This rise is probably due to stress. In the umbilical cord vein blood, the level of index-F was 1.5 times higher than that in the maternal plasma before delivery; however the total cortisol level was lower than that of the maternal plasma. The levels of both index-delta 4P and total progesterone showed a gradual increase during pregnancy in parallel, and each value in late pregnancy was about 4.5 to 4.9 times that of early pregnant women. At or near delivery, the level of index-delta 4P was almost stable and no decrease occurred. In the umbilical cord vein plasma, the levels of index-delta 4P and total progesterone were extremely high. However, the meaning of these results isn't clear.

Gamma-index method sensitivity for gauging plan delivery accuracy of volumetric modulated arc therapy.

PubMed

Park, Jong In; Park, Jong Min; Kim, Jung-In; Park, So-Yeon; Ye, Sung-Joon

2015-12-01

The aim of this study was to investigate the sensitivity of the gamma-index method according to various gamma criteria for volumetric modulated arc therapy (VMAT). Twenty head and neck (HN) and twenty prostate VMAT plans were retrospectively selected for this study. Both global and local 2D gamma evaluations were performed with criteria of 3%/3 mm, 2%/2 mm, 1%/2 mm and 2%/1 mm. In this study, the global and local gamma-index calculated the differences in doses relative to the maximum dose and the dose at the current measurement point, respectively. Using log files acquired during delivery, the differences in parameters at every control point between the VMAT plans and the log files were acquired. The differences in dose-volumetric parameters between reconstructed VMAT plans using the log files and the original VMAT plans were calculated. The Spearman's rank correlation coefficients (rs) were calculated between the passing rates and those differences. Considerable correlations with statistical significances were observed between global 1%/2 mm, local 1%/2 mm and local 2%/1 mm and the MLC position differences (rs = -0.712, -0.628 and -0.581). The numbers of rs values with statistical significance between the passing rates and the changes in dose-volumetric parameters were largest in global 2%/2 mm (n = 16), global 2%/1 mm (n = 15) and local 2%/1 mm (n = 13) criteria. Local gamma-index method with 2%/1 mm generally showed higher sensitivity to detect deviations between a VMAT plan and the delivery of the VMAT plan. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Beyond the Kubler index

USGS Publications Warehouse

Eberl, D.D.; Velde, B.

1989-01-01

The value of peak width at half-height for the illite 001 XRD reflection is known as the Kubler index or the illite 'crystallinity' index. This measurement, which has been related to the degree of metamorphism of very low-grade, pelitic rocks, is a function of at least two crystal-chemical factors: (1) illite X-ray scattering domain size; and (2) illite structural distortions (especially swelling). Reynolds' NEWMOD computer program is used to construct a grid with which these two contributions to illite peak width can be determined independently from measurements of the 001 peak width at half-height and the Srodofi intensity ratio. This method yields more information about changes undergone by illite during metamorphism than application of the Kubler index method alone.

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

18 CFR 342.3 - Indexing.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Indexing. 342.3 Section....3 Indexing. (a) Rate changes. A rate charged by a carrier may be changed, at any time, to a level... December 31, 1994. (5) When an initial rate, or rate changed by a method other than indexing, takes effect...

Isaac Asimov's library of the universe. Index.

NASA Astrophysics Data System (ADS)

Asimov, Isaac

A comprehensive index to the complete set of Isaac Asimov's thirty-two volume Library of the Universe, a series of space science books that introduce young readers to the facts and mysteries of the cosmos.

Towards cheminformatics-based estimation of drug therapeutic index: Predicting the protective index of anticonvulsants using a new quantitative structure-index relationship approach.

PubMed

Chen, Shangying; Zhang, Peng; Liu, Xin; Qin, Chu; Tao, Lin; Zhang, Cheng; Yang, Sheng Yong; Chen, Yu Zong; Chui, Wai Keung

2016-06-01

The overall efficacy and safety profile of a new drug is partially evaluated by the therapeutic index in clinical studies and by the protective index (PI) in preclinical studies. In-silico predictive methods may facilitate the assessment of these indicators. Although QSAR and QSTR models can be used for predicting PI, their predictive capability has not been evaluated. To test this capability, we developed QSAR and QSTR models for predicting the activity and toxicity of anticonvulsants at accuracy levels above the literature-reported threshold (LT) of good QSAR models as tested by both the internal 5-fold cross validation and external validation method. These models showed significantly compromised PI predictive capability due to the cumulative errors of the QSAR and QSTR models. Therefore, in this investigation a new quantitative structure-index relationship (QSIR) model was devised and it showed improved PI predictive capability that superseded the LT of good QSAR models. The QSAR, QSTR and QSIR models were developed using support vector regression (SVR) method with the parameters optimized by using the greedy search method. The molecular descriptors relevant to the prediction of anticonvulsant activities, toxicities and PIs were analyzed by a recursive feature elimination method. The selected molecular descriptors are primarily associated with the drug-like, pharmacological and toxicological features and those used in the published anticonvulsant QSAR and QSTR models. This study suggested that QSIR is useful for estimating the therapeutic index of drug candidates. Copyright © 2016. Published by Elsevier Inc.

Completed Research in Health, Physical Education, and Recreation. Including International Sources, Volume 19, 1977 Edition, Covering Research Completed in 1976.

ERIC Educational Resources Information Center

Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.

This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1976. It is arranged in three parts. (1) Index: In this section, cross references are given for all the listings in parts two and three. References are arranged under the subject headings, which are in alphabetical order. (2)…

Coronary heart disease index based on longitudinal electrocardiography

NASA Technical Reports Server (NTRS)

Townsend, J. C.; Cronin, J. P.

1977-01-01

A coronary heart disease index was developed from longitudinal ECG (LCG) tracings to serve as a cardiac health measure in studies of working and, essentially, asymptomatic populations, such as pilots and executives. For a given subject, the index consisted of a composite score based on the presence of LCG aberrations and weighted values previously assigned to them. The index was validated by correlating it with the known presence or absence of CHD as determined by a complete physical examination, including treadmill, resting ECG, and risk factor information. The validating sample consisted of 111 subjects drawn by a stratified-random procedure from 5000 available case histories. The CHD index was found to be significantly more valid as a sole indicator of CHD than the LCG without the use of the index. The index consistently produced higher validity coefficients in identifying CHD than did treadmill testing, resting ECG, or risk factor analysis.

Simple method to measure the refractive index of liquid with graduated cylinder and beaker.

PubMed

An, Yu-Kuan

2017-12-01

A simple method is introduced to measure the refractive index (RI) of a liquid with an experimental device composed of a graduated cylinder and a beaker which are coaxial. A magnified image of the graduated cylinder is formed as the liquid is poured into the beaker. Optical path analysis indicates that the RI of the liquid is equal to the product of the image's diameter magnification and the RI of air, irrelevant to the beaker. Theoretically, the RI measurement range is unlimited and the liquid dosage could be small as well. The device is used to carry out experiments by means of both the photographic method and telescope method to measure RIs of three kinds of liquids. The results show that the measured RIs all fit their published values well.

Simple method to measure the refractive index of liquid with graduated cylinder and beaker

NASA Astrophysics Data System (ADS)

An, Yu-Kuan

2017-12-01

A simple method is introduced to measure the refractive index (RI) of a liquid with an experimental device composed of a graduated cylinder and a beaker which are coaxial. A magnified image of the graduated cylinder is formed as the liquid is poured into the beaker. Optical path analysis indicates that the RI of the liquid is equal to the product of the image's diameter magnification and the RI of air, irrelevant to the beaker. Theoretically, the RI measurement range is unlimited and the liquid dosage could be small as well. The device is used to carry out experiments by means of both the photographic method and telescope method to measure RIs of three kinds of liquids. The results show that the measured RIs all fit their published values well.

Non-LTE line-blanketed model atmospheres of hot stars. 1: Hybrid complete linearization/accelerated lambda iteration method

NASA Technical Reports Server (NTRS)

Hubeny, I.; Lanz, T.

1995-01-01

A new munerical method for computing non-Local Thermodynamic Equilibrium (non-LTE) model stellar atmospheres is presented. The method, called the hybird complete linearization/accelerated lambda iretation (CL/ALI) method, combines advantages of both its constituents. Its rate of convergence is virtually as high as for the standard CL method, while the computer time per iteration is almost as low as for the standard ALI method. The method is formulated as the standard complete lineariation, the only difference being that the radiation intensity at selected frequency points is not explicity linearized; instead, it is treated by means of the ALI approach. The scheme offers a wide spectrum of options, ranging from the full CL to the full ALI method. We deonstrate that the method works optimally if the majority of frequency points are treated in the ALI mode, while the radiation intensity at a few (typically two to 30) frequency points is explicity linearized. We show how this method can be applied to calculate metal line-blanketed non-LTE model atmospheres, by using the idea of 'superlevels' and 'superlines' introduced originally by Anderson (1989). We calculate several illustrative models taking into accont several tens of thosands of lines of Fe III to Fe IV and show that the hybrid CL/ALI method provides a robust method for calculating non-LTE line-blanketed model atmospheres for a wide range of stellar parameters. The results for individual stellar types will be presented in subsequent papers in this series.

Prognostics of slurry pumps based on a moving-average wear degradation index and a general sequential Monte Carlo method

NASA Astrophysics Data System (ADS)

Wang, Dong; Tse, Peter W.

2015-05-01

Slurry pumps are commonly used in oil-sand mining for pumping mixtures of abrasive liquids and solids. These operations cause constant wear of slurry pump impellers, which results in the breakdown of the slurry pumps. This paper develops a prognostic method for estimating remaining useful life of slurry pump impellers. First, a moving-average wear degradation index is proposed to assess the performance degradation of the slurry pump impeller. Secondly, the state space model of the proposed health index is constructed. A general sequential Monte Carlo method is employed to derive the parameters of the state space model. The remaining useful life of the slurry pump impeller is estimated by extrapolating the established state space model to a specified alert threshold. Data collected from an industrial oil sand pump were used to validate the developed method. The results show that the accuracy of the developed method improves as more data become available.

Index of NACA Technical Publications: 1915-1949

NASA Technical Reports Server (NTRS)

1949-01-01

The Index of NACA Technical Publications covers reports issued from the date of origin of the Committee in 1915 until approximately September 1949. Because omissions were noted after publication of the Index issued in 1947, and since many new reports have been released since that time, it was decided to issue a new volume to supersede completely the 1947 Index, with supplements to be issued regularly in the future. Commencing with all publications issued after September 1, 1949, subject classifications were revised, the most important change involving the transfer of aircraft loads reports from the Aerodynamics classification to Structures. For those maintaining a file of NACA index cards, it is recommended that cards issued for reports dated prior to September 1, 1949 be removed from the file. This volume includes the same index information. Supplements covering periods following September 1, 1949, will be arranged according to the revised subject classifications. On the pages immediately following, the subject classifications are indexed in order of breakdown. There is included in the back of this volume an alphabetical arrangement of the subject classifications.

Brain Potentials Measured During a Go/NoGo Task Predict Completion of Substance Abuse Treatment

PubMed Central

Steele, Vaughn R.; Fink, Brandi C.; Maurer, J. Michael; Arbabshirani, Mohammad R.; Wilber, Charles H.; Jaffe, Adam J.; Sidz, Anna; Pearlson, Godfrey D.; Calhoun, Vince D.; Clark, Vincent P.; Kiehl, Kent A.

2014-01-01

Background US nationwide estimates indicate 50–80% of prisoners have a history of substance abuse or dependence. Tailoring substance abuse treatment to specific needs of incarcerated individuals could improve effectiveness of treating substance dependence and preventing drug abuse relapse. The purpose of the present study was to test the hypothesis that pre-treatment neural measures of a Go/NoGo task would predict which individuals would or would not complete a 12-week cognitive behavioral substance abuse treatment program. Methods Adult incarcerated participants (N=89; Females=55) who volunteered for substance abuse treatment performed a response inhibition (Go/NoGo) task while event-related potentials (ERP) were recorded. Stimulus- and response-locked ERPs were compared between individuals who completed (N=68; Females=45) and discontinued (N=21; Females=10) treatment. Results As predicted, stimulus-locked P2, response-locked error-related negativity (ERN/Ne), and response-locked error positivity (Pe), measured with windowed time-domain and principal component analysis, differed between groups. Using logistic regression and support-vector machine (i.e., pattern classifiers) models, P2 and Pe predicted treatment completion above and beyond other measures (i.e., N2, P300, ERN/Ne, age, sex, IQ, impulsivity, and self-reported depression, anxiety, motivation for change, and years of drug abuse). Conclusions We conclude individuals who discontinue treatment exhibited deficiencies in sensory gating, as indexed by smaller P2, error-monitoring, as indexed by smaller ERN/Ne, and adjusting response strategy post-error, as indexed by larger Pe. However, the combination of P2 and Pe reliably predicted 83.33% of individuals who discontinued treatment. These results may help in the development of individualized therapies, which could lead to more favorable, long-term outcomes. PMID:24238783

Relative importance index (RII) in ranking of procrastination factors among university students

NASA Astrophysics Data System (ADS)

Aziz, Nazrina; Zain, Zakiyah; Mafuzi, Raja Muhammad Zahid Raja; Mustapa, Aini Mastura; Najib, Nur Hasibah Mohd; Lah, Nik Fatihah Nik

2016-08-01

Procrastination is the action of delaying or postponing something such as making a decision or starting or completing some tasks or activities. According to previous studies, students who have a strong tendency to procrastinate get low scores in their tests, resulting in poorer academic performance compared to those who do not procrastinate. This study aims to identify the procrastination factors in completing assignments among three groups of undergraduate students. The relative importance of procrastination factors was quantified by the relative importance index (RII) method prior to ranking. A multistage sampling technique was used in selecting the sample. The findings revealed that `too many works in one time' is one of the top three factors contributing to procrastination in all groups.

The BODECOST Index (BCI): a composite index for assessing the impact of COPD in real life.

PubMed

Dal Negro, Roberto W; Celli, Bartolome R

2016-01-01

Chronic Obstructive Pulmonary Disease (COPD) is a progressive condition which is characterized by a dramatic socio-economic impact. Several indices were extensively investigated in order to asses the mortality risk in COPD, but the utilization of health care resources was never included in calculations. The aim of this study was to assess the predictive value of annual cost of care on COPD mortality at three years, and to develop a comprehensive index for easy calculation of mortality risk in real life. COPD patients were anonymously and automatically selected from the local institutional Data Base. Selection criteria were: COPD diagnosis; both genders; age ≥ 40 years; availability of at least one complete clinical record/year, including history; clinical signs; complete lung function, therapeutic strategy, health BODE index; Charlson Comorbidity Index, and outcomes, collected at the first visit, and over the following 3-years. At the first visit, the health annual cost of care was calculated in each patient for the previous 12 months, and the survival rate was also measured over the following 3 years. The hospitalization and the exacerbation rate were implemented to the BODE index and the novel index thus obtained was called BODECOST index (BCI), ranging from 0 to 10 points. The mean cost for each BCI step was calculated and then compared to the corresponding patients' survival duration. Parametrical, non parametrical tests, and linear regression were used; p < 0.05 was accepted as the lower limit of significance. At the first visit, the selected 275 patients were well matched for all variables by gender. The overall mortality over the 3 year survey was 40.4 % (n = 111/275). When compared to that of BODE index (r = 0.22), the total annual cost of care and the number of exacerbations showed the highest regression value vs the survival time (r = 0.58 and r = 0.44, respectively). BCI score proved strictly proportional to both the cost of

All complete intersection Calabi-Yau four-folds

NASA Astrophysics Data System (ADS)

Gray, James; Haupt, Alexander S.; Lukas, Andre

2013-07-01

We present an exhaustive, constructive, classification of the Calabi-Yau four-folds which can be described as complete intersections in products of projective spaces. A comprehensive list of 921,497 configuration matrices which represent all topologically distinct types of complete intersection Calabi-Yau four-folds is provided and can be downloaded from http://www-thphys.physics.ox.ac.uk/projects/CalabiYau/Cicy4folds/index.html. The manifolds have non-negative Euler characteristics in the range 0 ≤ χ ≤ 2610. This data set will be of use in a wide range of physical and mathematical applications. Nearly all of these four-folds are elliptically fibered and are thus of interest for F-theory model building.

Testing the extended biotic index in Slovakia: consistency, advantages, and limitations versus the saprobic assessment method of water quality.

PubMed

Pennelli, Bruno; Nagel, Karl-Otto; Crivellaro, Giuseppe; Fabiani, Claudio; Vancova, Alexandra; Mancini, Laura

2006-04-01

The European Union Water Framework Directive requires the achievement of environmental objectives for the ecological quality of water bodies. A comparable implementation of the Directive throughout member countries of the European Union is necessary to verify equal protection of surface waters. The Directive specifies that member states determine ecological quality by means of biological indices. To improve comparability of water quality assessment, this research carried out an intercalibration trial between the Slovak Saprobic Index and the Italian protocol of the Extended Biotic Index, as part of a cooperative program between Italy and the Slovak Republic. When assessing streams with no or low pollution, statistics showed similar results for both methods. In contrast, the comparison of indices was not accurate in the case of severely affected waters. Reliable conversion formulas are feasible to transform the Italian Extended Biotic Index into the Slovak Saprobic Index, and not vice versa.

LEAF AREA INDEX (LAI) CHANGE DETECTION ANALYSIS ON LOBLOLLY PINE (PINUS TAEDA) FOLLOWING COMPLETE UNDERSTORY REMOVAL

EPA Science Inventory

The confounding effect of understory vegetation contributions to satellite-derived estimates of leaf area index (LAI) was investigated on two loblolly pine (Pinus taeda) forest stands located in Virginia and North Carolina. In order to separate NDVI contributions of the dominantc...

[Evaluating the Significance of Odor Gas Released During the Directly Drying Process of Sludge: Based on the Multi-index Integrated Assessment Method].

PubMed

Ding, Wen-jie; Chen, Wen-he; Deng, Ming-jia; Luo, Hui; Li, Lin; Liu, Jun-xin

2016-02-15

Co-processing of sewage sludge using the cement kiln can realize sludge harmless treatment, quantity reduction, stabilization and reutilization. The moisture content should be reduced to below 30% to meet the requirement of combustion. Thermal drying is an effective way for sludge desiccation. Odors and volatile organic compounds are generated and released during the sludge drying process, which could lead to odor pollution. The main odor pollutants were selected by the multi-index integrated assessment method. The concentration, olfactory threshold, threshold limit value, smell security level and saturated vapor pressure were considered as indexes based on the related regulations in China and foreign countries. Taking the pollution potential as the evaluation target, and the risk index and odor emission intensity as evaluation indexes, the odor pollution potential rated evaluation model of the pollutants was built according to the Weber-Fechner law. The aim of the present study is to form the rating evaluation method of odor potential pollution capacity suitable for the directly drying process of sludge.

Method for indexing and retrieving manufacturing-specific digital imagery based on image content

DOEpatents

Ferrell, Regina K.; Karnowski, Thomas P.; Tobin, Jr., Kenneth W.

2004-06-15

A method for indexing and retrieving manufacturing-specific digital images based on image content comprises three steps. First, at least one feature vector can be extracted from a manufacturing-specific digital image stored in an image database. In particular, each extracted feature vector corresponds to a particular characteristic of the manufacturing-specific digital image, for instance, a digital image modality and overall characteristic, a substrate/background characteristic, and an anomaly/defect characteristic. Notably, the extracting step includes generating a defect mask using a detection process. Second, using an unsupervised clustering method, each extracted feature vector can be indexed in a hierarchical search tree. Third, a manufacturing-specific digital image associated with a feature vector stored in the hierarchicial search tree can be retrieved, wherein the manufacturing-specific digital image has image content comparably related to the image content of the query image. More particularly, can include two data reductions, the first performed based upon a query vector extracted from a query image. Subsequently, a user can select relevant images resulting from the first data reduction. From the selection, a prototype vector can be calculated, from which a second-level data reduction can be performed. The second-level data reduction can result in a subset of feature vectors comparable to the prototype vector, and further comparable to the query vector. An additional fourth step can include managing the hierarchical search tree by substituting a vector average for several redundant feature vectors encapsulated by nodes in the hierarchical search tree.

A novel technique to solve nonlinear higher-index Hessenberg differential-algebraic equations by Adomian decomposition method.

PubMed

Benhammouda, Brahim

2016-01-01

Since 1980, the Adomian decomposition method (ADM) has been extensively used as a simple powerful tool that applies directly to solve different kinds of nonlinear equations including functional, differential, integro-differential and algebraic equations. However, for differential-algebraic equations (DAEs) the ADM is applied only in four earlier works. There, the DAEs are first pre-processed by some transformations like index reductions before applying the ADM. The drawback of such transformations is that they can involve complex algorithms, can be computationally expensive and may lead to non-physical solutions. The purpose of this paper is to propose a novel technique that applies the ADM directly to solve a class of nonlinear higher-index Hessenberg DAEs systems efficiently. The main advantage of this technique is that; firstly it avoids complex transformations like index reductions and leads to a simple general algorithm. Secondly, it reduces the computational work by solving only linear algebraic systems with a constant coefficient matrix at each iteration, except for the first iteration where the algebraic system is nonlinear (if the DAE is nonlinear with respect to the algebraic variable). To demonstrate the effectiveness of the proposed technique, we apply it to a nonlinear index-three Hessenberg DAEs system with nonlinear algebraic constraints. This technique is straightforward and can be programmed in Maple or Mathematica to simulate real application problems.

Method of producing optical quality glass having a selected refractive index

DOEpatents

Poco, John F.; Hrubesh, Lawrence W.

2000-01-01

Optical quality glass having a selected refractive index is produced by a two stage drying process. A gel is produced using sol-gel chemistry techniques and first dried by controlled evaporation until the gel volume reaches a pre-selected value. This pre-selected volume determines the density and refractive index of the finally dried gel. The gel is refilled with solvent in a saturated vapor environment, and then dried again by supercritical extraction of the solvent to form a glass. The glass has a refractive index less than the full density of glass, and the range of achievable refractive indices depends on the composition of the glass. Glasses having different refractive indices chosen from an uninterrupted range of values can be produced from a single precursor solution.

Development and Initial Validation of the Self-Assessed Lupus Damage Index Questionnaire (LDIQ)

PubMed Central

Costenbader, Karen H.; Khamashta, Munther; Ruiz-Garcia, Silvia; Perez-Rodriguez, Maria Teresa; Petri, Michelle; Elliott, Jennifer; Manzi, Susan; Karlson, Elizabeth W.; Turner-Stokes, Tabitha; Bermas, Bonnie; Coblyn, Jonathan; Massarotti, Elena; Schur, Peter; Fraser, Patricia; Navarro, Iris; Hanly, John G.; Shaver, Timothy S.; Katz, Robert S.; Chakravarty, Eliza; Fortin, Paul R.; Sanchez, Martha L.; Liu, Jigna; Michaud, Kaleb; Alarcón, Graciela S.; Wolfe, Frederick

2010-01-01

Purpose The SLICC Damage Index (SDI) is a validated instrument for assessing organ damage in systemic lupus erythematosus (SLE). Trained physicians must complete it, limiting utility where this is impossible. Methods We developed and pilot-tested a self-assessed organ damage instrument, the Lupus Damage Index Questionnaire (LDIQ), in 37 SLE subjects and 7 physicians. After refinement, 569 English-speaking SLE subjects and 14 rheumatologists from 11 international SLE clinics participated in validation. Subjects and physicians completed instruments separately. We calculated sensitivity, specificity, Spearman correlations and agreement, using the SDI as gold standard. 605 SLE participants in the community-based National Data Bank for Rheumatic Diseases (NDB) study completed the LDIQ and we assessed correlations with outcome and disability measures. Results Mean LDIQ score was 3.3 (0-16) and mean SDI score was 1.5 (0-9). LDIQ had a moderately high correlation with SDI (Spearman r=0.50, p<0.001). Specificities of individual LDIQ items were >80%, except for neuropathy. Sensitivities were variable and lowest for damage with <1% prevalence. Agreement between SDI and LDIQ was > 85% for all but neuropathy, reduced renal function, deforming arthritis and alopecia. In the NDB, LDIQ correlated well with comorbidity index (r=0.45), SF-36 physical component scale (0.43), Medical Research Council dyspnea scale (0.40), disability (0.37) and SLE Activity Questionnaire score (0.37). Conclusions The LDIQ’s metric properties are good compared to the SDI. It has construct validity and correlations with health assessments similar to the SDI. The LDIQ should allow expansion of SLE research. Its ultimate value will be determined in longitudinal studies. PMID:20391512

A Comparison of Three Determinants of an Engagement Index for Use in a Simulated Flight Environment

NASA Technical Reports Server (NTRS)

Hitt, James M., II

1995-01-01

The following report details a project design that is to be completed by the end of the year. Determining how engaged a person is at a task is rather difficult. There are many different ways to assess engagement. One such method is to use psychophysical measures. The current study focuses on three determinants of an engagement index proposed by researchers at NASA-Langley (Pope, A. T., Bogart, E. H., and Bartolome, D. S., 1995). The index (20 Beta/(Alpha+Theta)) uses EEG power bands to determine a person's level of engagement while performs a compensatory tracking task. The tracking task switches between manual and automatic modes. Participants each experience both positive and negative feedback within each trial of the three trials. The tracking task is altered in terms of difficulty depending on the participants current engagement index. The rationale of this study is to determine the optimal level of engagement to gain peak performance. The three determinants are based on an absolute index which differs from the past research which uses a slope index.

Linear Matrix Inequality Method for a Quadratic Performance Index Minimization Problem with a class of Bilinear Matrix Inequality Conditions

NASA Astrophysics Data System (ADS)

Tanemura, M.; Chida, Y.

2016-09-01

There are a lot of design problems of control system which are expressed as a performance index minimization under BMI conditions. However, a minimization problem expressed as LMIs can be easily solved because of the convex property of LMIs. Therefore, many researchers have been studying transforming a variety of control design problems into convex minimization problems expressed as LMIs. This paper proposes an LMI method for a quadratic performance index minimization problem with a class of BMI conditions. The minimization problem treated in this paper includes design problems of state-feedback gain for switched system and so on. The effectiveness of the proposed method is verified through a state-feedback gain design for switched systems and a numerical simulation using the designed feedback gains.

Resistance distance and Kirchhoff index in circulant graphs

NASA Astrophysics Data System (ADS)

Zhang, Heping; Yang, Yujun

The resistance distance rij between vertices i and j of a connected (molecular) graph G is computed as the effective resistance between nodes i and j in the corresponding network constructed from G by replacing each edge of G with a unit resistor. The Kirchhoff index Kf(G) is the sum of resistance distances between all pairs of vertices. In this work, closed-form formulae for Kirchhoff index and resistance distances of circulant graphs are derived in terms of Laplacian spectrum and eigenvectors. Special formulae are also given for four classes of circulant graphs (complete graphs, complete graphs minus a perfect matching, cycles, Möbius ladders Mp). In particular, the asymptotic behavior of Kf(Mp) as p ? ? is obtained, that is, Kf(Mp) grows as ⅙p3 as p ? ?.

Drug treatment completion and post-discharge employment in the TOPPS-II Interstate Cooperative Study.

PubMed

Arria, Amelia M

2003-07-01

The objective of this study was to use administrative data to examine the effect of drug treatment completion on patients' subsequent employment and wages earned in the year following discharge, and to compare the consistency of these results across three states. Drug treatment and wage data from 20,495 drug treatment patients were used in this study. Treatment data were provided by the state substance abuse management information systems for Baltimore City, Washington State, and Oklahoma. Wage data were provided by the agency in each state responsible for collecting and reporting wage information. A quasi-experimental design was used to compare treatment completers and non-completers in the year after an index treatment episode. In addition, employment history in the year prior to the index episode was used to statistically adjust for group differences. The index episode of care may have included services under more than one treatment modality. The full social security number was used to link the drug treatment and wage administrative datasets. Treatment completers were 22% to 49% more likely than non-completers to be employed and to earn higher wages in the year following treatment, holding other variables constant. Patients staying in treatment longer than 90 days were 22% to 43% more likely to be employed in the year following treatment than those who stayed a shorter time. These findings were consistent across the three project states with different client populations, treatment delivery systems, and labor markets.

Genetic parameters and selection of soybean lines based on selection indexes.

PubMed

Teixeira, F G; Hamawaki, O T; Nogueira, A P O; Hamawaki, R L; Jorge, G L; Hamawaki, C L; Machado, B Q V; Santana, A J O

2017-09-21

Defining selection criteria is important to obtain promising genotypes in a breeding program. The objective of this study was to estimate genetic parameters for agronomic traits and to perform soybean line selection using selection indices. The experiment was conducted at an experimental area located at Capim Branco farm, belonging to the Federal University of Uberlândia. A total of 37 soybean genotypes were evaluated in randomized complete block design with three replicates, in which twelve agronomic traits were evaluated. Analysis of variance, the Scott-Knott test at the 1 and 5% level of probability, and selection index analyses were performed. There was genetic variability for all agronomic traits, with medium to high levels of genotype determination coefficient. Twelve lines with a total cycle up to 110 days were observed and grouped with the cultivars MSOY 6101 and UFUS 7910. Three lines, UFUS FG 03, UFUS FG 20, and UFUS FG 31, were highlighted regarding grain yield with higher values than the national average of 3072 kg/ha. The direct selection enabled the highest trait individual gains. The Williams (1962) index and the Smith (1936) and Hazel (1943) index presented the highest selection gain for the grain yield character. The genotype-ideotype distance index and the index of the sum of ranks of Mulamba and Mock (1978) presented higher values of total selection gain. The lines UFUS FG 12, UFUS FG 14, UFUS FG 18, UFUS FG 25, and UFUS FG 31 were distinguished as superior genotypes by direct selection methods and selection indexes.

Approaches of using the beard testing method to obtain complete length distributions of the original samples

USDA-ARS?s Scientific Manuscript database

The fiber testing instruments such as HVI can rapidly measure fiber length by testing a tapered fiber beard of the sample. But these instruments that use the beard testing method only report a limited number of fiber length parameters instead of the complete length distribution that is important fo...

An index for quantifying female education and child health in emerging economies.

PubMed

Rodríguez Martín, José Antonio; Holgado Molina, María del Mar; Salinas Fernández, José Antonio

2015-02-01

To construct an index to measure female education and child health in the least developed countries (LDCs) of Asia. The design of our index includes the variables of female education and child health defined in the goals of the Millennium Declaration. For this purpose, we used Pena's P2 distance method for 2011, the last year for which data were available for the set of variables. We have proposed a territorial measure and classification of female education and child health in the LDCs of Asia. We believe that the most striking differences between countries relate to basic female education variables such as girls' primary completion rate, and female literacy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Multi-Level Bitmap Indexes for Flash Memory Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Kesheng; Madduri, Kamesh; Canon, Shane

2010-07-23

Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data atmore » the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.« less

A method for matching the refractive index and kinematic viscosity of a blood analog for flow visualization in hydraulic cardiovascular models.

PubMed

Nguyen, T T; Biadillah, Y; Mongrain, R; Brunette, J; Tardif, J C; Bertrand, O F

2004-08-01

In this work, we propose a simple method to simultaneously match the refractive index and kinematic viscosity of a circulating blood analog in hydraulic models for optical flow measurement techniques (PIV, PMFV, LDA, and LIF). The method is based on the determination of the volumetric proportions and temperature at which two transparent miscible liquids should be mixed to reproduce the targeted fluid characteristics. The temperature dependence models are a linear relation for the refractive index and an Arrhenius relation for the dynamic viscosity of each liquid. Then the dynamic viscosity of the mixture is represented with a Grunberg-Nissan model of type 1. Experimental tests for acrylic and blood viscosity were found to be in very good agreement with the targeted values (measured refractive index of 1.486 and kinematic viscosity of 3.454 milli-m2/s with targeted values of 1.47 and 3.300 milli-m2/s).

Abstracting and indexing guide

USGS Publications Warehouse

,; ,

1974-01-01

These instructions have been prepared for those who abstract and index scientific and technical documents for the Water Resources Scientific Information Center (WRSIC). With the recent publication growth in all fields, information centers have undertaken the task of keeping the various scientific communities aware of current and past developments. An abstract with carefully selected index terms offers the user of WRSIC services a more rapid means for deciding whether a document is pertinent to his needs and professional interests, thus saving him the time necessary to scan the complete work. These means also provide WRSIC with a document representation or surrogate which is more easily stored and manipulated to produce various services. Authors are asked to accept the responsibility for preparing abstracts of their own papers to facilitate quick evaluation, announcement, and dissemination to the scientific community.

Computer aided indexing at NASA

NASA Technical Reports Server (NTRS)

Buchan, Ronald L.

1987-01-01

The application of computer technology to the construction of the NASA Thesaurus and in NASA Lexical Dictionary development is discussed in a brief overview. Consideration is given to the printed and online versions of the Thesaurus, retrospective indexing, the NASA RECON frequency command, demand indexing, lists of terms by category, and the STAR and IAA annual subject indexes. The evolution of computer methods in the Lexical Dictionary program is traced, from DOD and DOE subject switching to LCSH machine-aided indexing and current techniques for handling natural language (e.g., the elimination of verbs to facilitate breakdown of sentences into words and phrases).

A Multiple Choice Version of the Sentence Completion Method

ERIC Educational Resources Information Center

Shouval, Ron; And Others

1975-01-01

It was concluded that a multiple choice form corresponding to a sentence completion measure, test clearly defined personality areas (such as autonomy) could be a reasonable alternative for many purposes. (Author/DEP)

A randomized controlled trial of the different impression methods for the complete denture fabrication: Patient reported outcomes.

PubMed

Jo, Ayami; Kanazawa, Manabu; Sato, Yusuke; Iwaki, Maiko; Akiba, Norihisa; Minakuchi, Shunsuke

2015-08-01

To compare the effect of conventional complete dentures (CD) fabricated using two different impression methods on patient-reported outcomes in a randomized controlled trial (RCT). A cross-over RCT was performed with edentulous patients, required maxillomandibular CDs. Mandibular CDs were fabricated using two different methods. The conventional method used a custom tray border moulded with impression compound and a silicone. The simplified used a stock tray and an alginate. Participants were randomly divided into two groups. The C-S group had the conventional method used first, followed by the simplified. The S-C group was in the reverse order. Adjustment was performed four times. A wash out period was set for 1 month. The primary outcome was general patient satisfaction, measured using visual analogue scales, and the secondary outcome was oral health-related quality of life, measured using the Japanese version of the Oral Health Impact Profile for edentulous (OHIP-EDENT-J) questionnaire scores. Twenty-four participants completed the trial. With regard to general patient satisfaction, the conventional method was significantly more acceptable than the simplified. No significant differences were observed between the two methods in the OHIP-EDENT-J scores. This study showed CDs fabricated with a conventional method were significantly more highly rated for general patient satisfaction than a simplified. CDs, fabricated with the conventional method that included a preliminary impression made using alginate in a stock tray and subsequently a final impression made using silicone in a border moulded custom tray resulted in higher general patient satisfaction. UMIN000009875. Copyright © 2015 Elsevier Ltd. All rights reserved.

Semantic Indexing of Medical Learning Objects: Medical Students' Usage of a Semantic Network

PubMed Central

Gießler, Paul; Ohnesorge-Radtke, Ursula; Spreckelsen, Cord

2015-01-01

Background The Semantically Annotated Media (SAM) project aims to provide a flexible platform for searching, browsing, and indexing medical learning objects (MLOs) based on a semantic network derived from established classification systems. Primarily, SAM supports the Aachen emedia skills lab, but SAM is ready for indexing distributed content and the Simple Knowledge Organizing System standard provides a means for easily upgrading or even exchanging SAM’s semantic network. There is a lack of research addressing the usability of MLO indexes or search portals like SAM and the user behavior with such platforms. Objective The purpose of this study was to assess the usability of SAM by investigating characteristic user behavior of medical students accessing MLOs via SAM. Methods In this study, we chose a mixed-methods approach. Lean usability testing was combined with usability inspection by having the participants complete four typical usage scenarios before filling out a questionnaire. The questionnaire was based on the IsoMetrics usability inventory. Direct user interaction with SAM (mouse clicks and pages accessed) was logged. Results The study analyzed the typical usage patterns and habits of students using a semantic network for accessing MLOs. Four scenarios capturing characteristics of typical tasks to be solved by using SAM yielded high ratings of usability items and showed good results concerning the consistency of indexing by different users. Long-tail phenomena emerge as they are typical for a collaborative Web 2.0 platform. Suitable but nonetheless rarely used keywords were assigned to MLOs by some users. Conclusions It is possible to develop a Web-based tool with high usability and acceptance for indexing and retrieval of MLOs. SAM can be applied to indexing multicentered repositories of MLOs collaboratively. PMID:27731860

Remotely Sensed Index of Deforestation/Urbanization for use in Climate Models

NASA Technical Reports Server (NTRS)

Carlson, Toby N.

1996-01-01

The purpose of this investigation is to use a new method for deriving land surface parameters from a combination of thermal infrared and vegetation index measurements from satellites (Landsat-TM, and NOAA-AVHRR) and to integrate these parameters with more conventional data bases. We have completed an investigation of urbanization in the State College, PA area and have begun work in Chester County, PA, and Costa Rica. Our basic hypothesis is that changes in land use, including deforestation, exert a profound influence on local microclimates whose effects may greatly exceed in importance those occurring on larger scales.

Retrieving Leaf Area Index (LAI) Using Remote Sensing: Theories, Methods and Sensors

PubMed Central

Zheng, Guang; Moskal, L. Monika

2009-01-01

The ability to accurately and rapidly acquire leaf area index (LAI) is an indispensable component of process-based ecological research facilitating the understanding of gas-vegetation exchange phenomenon at an array of spatial scales from the leaf to the landscape. However, LAI is difficult to directly acquire for large spatial extents due to its time consuming and work intensive nature. Such efforts have been significantly improved by the emergence of optical and active remote sensing techniques. This paper reviews the definitions and theories of LAI measurement with respect to direct and indirect methods. Then, the methodologies for LAI retrieval with regard to the characteristics of a range of remotely sensed datasets are discussed. Remote sensing indirect methods are subdivided into two categories of passive and active remote sensing, which are further categorized as terrestrial, aerial and satellite-born platforms. Due to a wide variety in spatial resolution of remotely sensed data and the requirements of ecological modeling, the scaling issue of LAI is discussed and special consideration is given to extrapolation of measurement to landscape and regional levels. PMID:22574042

Retrieving Leaf Area Index (LAI) Using Remote Sensing: Theories, Methods and Sensors.

PubMed

Zheng, Guang; Moskal, L Monika

2009-01-01

The ability to accurately and rapidly acquire leaf area index (LAI) is an indispensable component of process-based ecological research facilitating the understanding of gas-vegetation exchange phenomenon at an array of spatial scales from the leaf to the landscape. However, LAI is difficult to directly acquire for large spatial extents due to its time consuming and work intensive nature. Such efforts have been significantly improved by the emergence of optical and active remote sensing techniques. This paper reviews the definitions and theories of LAI measurement with respect to direct and indirect methods. Then, the methodologies for LAI retrieval with regard to the characteristics of a range of remotely sensed datasets are discussed. Remote sensing indirect methods are subdivided into two categories of passive and active remote sensing, which are further categorized as terrestrial, aerial and satellite-born platforms. Due to a wide variety in spatial resolution of remotely sensed data and the requirements of ecological modeling, the scaling issue of LAI is discussed and special consideration is given to extrapolation of measurement to landscape and regional levels.

Complete method to obtain, culture, and transfer mouse blastocysts nonsurgically to study implantation and development.

PubMed

Moreno-Moya, Juan Manuel; Ramírez, Leslie; Vilella, Felipe; Martínez, Sebastián; Quiñonero, Alicia; Noguera, Inmaculada; Pellicer, Antonio; Simón, Carlos

2014-03-01

To illustrate an efficient, complete, step-by-step protocol for studying implantation in mice. Video presentation of an animal model for research in reproductive biology. Mouse (Mus musculus). A nonsurgical embryo transfer system very similar to that used for human embryo transfer. The protocols with recipient and donor mice are performed in parallel in the same week. For the donor mice: the first step is ovarian stimulation, followed by ovulation induction and mating; finally, the mice are sacrificed, and the embryos are collected and cultured. For recipient mice: first estrous synchrony is induced, followed by mating with a vasectomized male, visualization of the vaginal plug, and nonsurgical transfer of the embryos. Finally (optionally), the implantation sites can be visualized on day 7.5 of development. (All animal experiments were performed with the approval of the institutional review board.) Implantation is an essential step in human reproduction although, because of technical and ethics considerations, still relatively little is known about human implantation and early development. Conversely, mouse models are well established and can be used for preliminary experiments. However, there are various bottlenecks in the procedure for obtaining and transferring murine embryos, which makes experimentation with this model more difficult. These difficulties include pseudopregnancy, ovarian hyperstimulation, and embryo collection, culture, and transfer. We have proposed a complete, efficient method for obtaining, culturing, and transferring mouse blastocysts that can be easily applied in research. Potential applications include testing new media components that do not affect preimplantation but do affect implantation and early development. The embryo transfer method proposed here has been demonstrated to achieve embryo implantation easier and faster than, and in approximately similar rates as other traditional surgery methods. This workflow is the first set of

Associations of key diet-quality indexes with mortality in the Multiethnic Cohort: the Dietary Patterns Methods Project.

PubMed

Harmon, Brook E; Boushey, Carol J; Shvetsov, Yurii B; Ettienne, Reynolette; Reedy, Jill; Wilkens, Lynne R; Le Marchand, Loic; Henderson, Brian E; Kolonel, Laurence N

2015-03-01

Healthy dietary patterns have been linked positively with health and longevity. However, prospective studies in diverse populations in the United States addressing dietary patterns and mortality are limited. We assessed the ability of the following 4 diet-quality indexes [the Healthy Eating Index-2010 (HEI-2010), the Alternative HEI-2010 (AHEI-2010), the alternate Mediterranean diet score (aMED), and the Dietary Approaches to Stop Hypertension (DASH)] to predict the reduction in risk of mortality from all causes, cardiovascular disease (CVD), and cancer. White, African American, Native Hawaiian, Japanese American, and Latino adults (n = 215,782) from the Multiethnic Cohort completed a quantitative food-frequency questionnaire. Scores for each dietary index were computed and divided into quintiles for men and women. Mortality was documented over 13-18 y of follow-up. HRs and 95% CIs were computed by using adjusted Cox models. High HEI-2010, AHEI-2010, aMED, and DASH scores were all inversely associated with risk of mortality from all causes, CVD, and cancer in both men and women (P-trend < 0.0001 for all models). For men, the HEI-2010 was consistently associated with a reduction in risk of mortality for all causes (HR: 0.75; 95% CI: 0.71, 0.79), CVD (HR: 0.74; 95% CI: 0.69, 0.81), and cancer (HR: 0.76; 95% CI: 0.70, 0.83) when lowest and highest quintiles were compared. In women, the AHEI and aMED showed large reductions for all-cause mortality (HR: 0.78; 95% CI: 0.74, 0.82), the AHEI showed large reductions for CVD (HR: 0.76; 95% CI: 0.69, 0.83), and the aMED showed large reductions for cancer (HR: 0.84; 95% CI: 0.76, 0. 92). These results, in a US multiethnic population, suggest that consuming a dietary pattern that achieves a high diet-quality index score is associated with lower risk of mortality from all causes, CVD, and cancer in adult men and women. © 2015 American Society for Nutrition.

Simultaneous measurement of refractive index and temperature based on intensity demodulation using matching grating method.

PubMed

Qi, Liang; Zhao, Chun-Liu; Kang, Juan; Jin, Yongxing; Wang, Jianfeng; Ye, Manping; Jin, Shangzhong

2013-07-01

A solution refractive index (SRI) and temperature simultaneous measurement sensor with intensity-demodulation system based on matching grating method were demonstrated. Long period grating written in a photonic crystal fiber (LPG-PCF), provides temperature stable and wavelength dependent optical intensity transmission. The reflective peaks of two fiber Bragg gratings (FBGs), one of which is etched then sensitive to both SRI and temperature, another (FBG2) is only sensitive to temperature, were located in the same linear range of the LPG-PCF's transmission spectrum. An identical FBG with FBG2 was chosen as a matching FBG. When environments (SRI and temperature) change, the wavelength shifts of the FBGs are translated effectively to the reflection intensity changes. By monitoring output lights of unmatching and matching paths, the SRI and temperature were deduced by a signal processing unit. Experimental results show that the simultaneous refractive index and temperature measurement system work well. The proposed sensor system is compact and suitable for in situ applications at lower cost.

Complete prevalence of malignant primary brain tumors registry data in the United States compared with other common cancers, 2010

PubMed Central

Zhang, Adah S.; Ostrom, Quinn T.; Kruchko, Carol; Rogers, Lisa; Peereboom, David M.

2017-01-01

Abstract Background. Complete prevalence proportions illustrate the burden of disease in a population. This study estimates the 2010 complete prevalence of malignant primary brain tumors overall and by Central Brain Tumor Registry of the United States (CBTRUS) histology groups, and compares the brain tumor prevalence estimates to the complete prevalence of other common cancers as determined by the Surveillance, Epidemiology, and End Results Program (SEER) by age at prevalence (2010): children (0–14 y), adolescent and young adult (AYA) (15–39 y), and adult (40+ y). Methods. Complete prevalence proportions were estimated using a novel regression method extended from the Completeness Index Method, which combines survival and incidence data from multiple sources. In this study, two datasets, CBTRUS and SEER, were used to calculate complete prevalence estimates of interest. Results. Complete prevalence for malignant primary brain tumors was 47.59/100000 population (22.31, 48.49, and 57.75/100000 for child, AYA, and adult populations). The most prevalent cancers by age were childhood leukemia (36.65/100000), AYA melanoma of the skin (66.21/100000), and adult female breast (1949.00/100000). The most prevalent CBTRUS histologies in children and AYA were pilocytic astrocytoma (6.82/100000, 5.92/100000), and glioblastoma (12.76/100000) in adults. Conclusions. The relative impact of malignant primary brain tumors is higher among children than any other age group; it emerges as the second most prevalent cancer among children. Complete prevalence estimates for primary malignant brain tumors fills a gap in overall cancer knowledge, which provides critical information toward public health and health care planning, including treatment, decision making, funding, and advocacy programs. PMID:28039365

Index of Refraction without Geometry

ERIC Educational Resources Information Center

Farkas, N.; Henriksen, P. N.; Ramsier, R. D.

2006-01-01

This article presents several activities that permit students to determine the index of refraction of transparent solids and liquids using simple equipment without the need for geometrical relationships, special lighting or optical instruments. Graphical analysis of the measured data is shown to be a useful method for determining the index of…

Development and evaluation of a method for calculating the Healthy Eating Index-2005 using the Nutrition Data System for Research

USDA-ARS?s Scientific Manuscript database

Objective: To develop and evaluate a method for calculating the Healthy Eating Index-2005 (HEI-2005) with the widely used Nutrition Data System for Research (NDSR) based on the method developed for use with the US Department of Agriculture’s (USDA) Food and Nutrient Dietary Data System (FNDDS) and M...

Comparison of fatty liver index with noninvasive methods for steatosis detection and quantification

PubMed Central

Zelber-Sagi, Shira; Webb, Muriel; Assy, Nimer; Blendis, Laurie; Yeshua, Hanny; Leshno, Moshe; Ratziu, Vlad; Halpern, Zamir; Oren, Ran; Santo, Erwin

2013-01-01

AIM: To compare noninvasive methods presently used for steatosis detection and quantification in nonalcoholic fatty liver disease (NAFLD). METHODS: Cross-sectional study of subjects from the general population, a subgroup from the First Israeli National Health Survey, without excessive alcohol consumption or viral hepatitis. All subjects underwent anthropometric measurements and fasting blood tests. Evaluation of liver fat was performed using four noninvasive methods: the SteatoTest; the fatty liver index (FLI); regular abdominal ultrasound (AUS); and the hepatorenal ultrasound index (HRI). Two of the noninvasive methods have been validated vs liver biopsy and were considered as the reference methods: the HRI, the ratio between the median brightness level of the liver and right kidney cortex; and the SteatoTest, a biochemical surrogate marker of liver steatosis. The FLI is calculated by an algorithm based on triglycerides, body mass index, γ-glutamyl-transpeptidase and waist circumference, that has been validated only vs AUS. FLI < 30 rules out and FLI ≥ 60 rules in fatty liver. RESULTS: Three hundred and thirty-eight volunteers met the inclusion and exclusion criteria and had valid tests. The prevalence rate of NAFLD was 31.1% according to AUS. The FLI was very strongly correlated with SteatoTest (r = 0.91, P < 0.001) and to a lesser but significant degree with HRI (r = 0.55, P < 0.001). HRI and SteatoTest were significantly correlated (r = 0.52, P < 0.001). The κ between diagnosis of fatty liver by SteatoTest (≥ S2) and by FLI (≥ 60) was 0.74, which represented good agreement. The sensitivity of FLI vs SteatoTest was 85.5%, specificity 92.6%, positive predictive value (PPV) 74.7%, and negative predictive value (NPV) 96.1%. Most subjects (84.2%) with FLI < 60 had S0 and none had S3-S4. The κ between diagnosis of fatty liver by HRI (≥ 1.5) and by FLI (≥ 60) was 0.43, which represented only moderate agreement. The sensitivity of FLI vs HRI was 56

[ATD index in Perthes disease].

PubMed

Grzegorzewski, Andrzej; Synder, Marek; Szymczak, Wiesław; Kowalewski, Maciej; Kozłowski, Piotr

2003-01-01

Authors present an estimation of articulo-trochanteric-distance (ATD) and ATD index in patients with Perthes disease and if there is any correlation between ATD and ATD index and age at the onset, gender, type of treatment, Herring and Stulberg classification. The study population consisted of 242 patients (35 female and 207 male) who had reached skeletal maturity at last follow up. The mean age at the onset of symptoms was 7 years and 4 months. All patients were treated by containment methods (bed rest and traction in abduction, brace, Petri cast, varus osteotomy, Salter osteotomy and shelf operation). ATD was estimated according to the Edgren methods and ATD index was calculated as relation ATD on Perthes site to ATD in normal joint. The late results were classified according to the Stulberg classification. Statistical analysis did not revealed any correlation between the age at the onset, gender and ATD index and ATD during last follow up. Both parameters decreased with poor results according to the Stulberg classifications. ATD index and ATD were statistically significant less after surgical treatment than after non-operative treatment. The same relations were seen between patients with leg length discrepancy (LLD) and without LLD. Patients in Herring group A had statistically significant bigger both parameters than patients in group B, C and patients in Herring group B than C. Articulo-trochanteric-distance and ATD index decreased during follow up and ATD decreased also in normal joint. In our opinion ATD index is a more reliable radiological parameter than ATD. ATD index decreases with bigger necrosis of the femoral head and poor result according to the Stulberg classification. This parameter is an evidence of the dysfunction proximal femoral growth plate in patients with LLD. The most decreased ATD index was observed after surgical treatment. There was no correlation between the age at the onset, gender and ATD index at last follow up.

Completely automated modal analysis procedure based on the combination of different OMA methods

NASA Astrophysics Data System (ADS)

Ripamonti, Francesco; Bussini, Alberto; Resta, Ferruccio

2018-03-01

In this work a completely automated output-only Modal Analysis procedure is presented and all its benefits are listed. Based on the merging of different Operational Modal Analysis methods and a statistical approach, the identification process has been improved becoming more robust and giving as results only the real natural frequencies, damping ratios and mode shapes of the system. The effect of the temperature can be taken into account as well, leading to the creation of a better tool for automated Structural Health Monitoring. The algorithm has been developed and tested on a numerical model of a scaled three-story steel building present in the laboratories of Politecnico di Milano.

Predicting High School Completion Using Student Performance in High School Algebra: A Mixed Methods Research Study

ERIC Educational Resources Information Center

Chiado, Wendy S.

2012-01-01

Too many of our nation's youth have failed to complete high school. Determining why so many of our nation's students fail to graduate is a complex, multi-faceted problem and beyond the scope of any one study. The study presented herein utilized a thirteen-step mixed methods model developed by Leech and Onwuegbuzie (2007) to demonstrate within a…

Effectiveness of community-based rehabilitation after traumatic brain injury for 489 program completers compared with those precipitously discharged.

PubMed

Altman, Irwin M; Swick, Shannon; Parrot, Devan; Malec, James F

2010-11-01

To evaluate outcomes of home- and community-based postacute brain injury rehabilitation (PABIR). Retrospective analysis of program evaluation data for treatment completers and noncompleters. Home- and community-based PABIR conducted in 7 geographically distinct U.S. cities. Patients (N=489) with traumatic brain injury who completed the prescribed course of rehabilitation (completed-course-of-treatment [CCT] group) compared with 114 who were discharged precipitously before program completion (precipitous-discharge [PD] group). PABIR delivered in home and community settings by certified professional staff on an individualized basis. Mayo-Portland Adaptability Inventory (MPAI-4) completed by means of professional consensus on admission and at discharge; MPAI-4 Participation Index at 3- and 12-month follow-up through telephone contact. Analysis of covariance (CCT vs PD group as between-subjects variable, admission MPAI-4 score as covariate) showed significant differences between groups at discharge on the full MPAI-4 (F=82.25; P<.001), Ability Index (F=50.24; P<.001), Adjustment Index (F=81.20; P<.001), and Participation Index (F=59.48; P<.001). A large portion of the sample was lost to follow-up; however, available data showed that group differences remained statistically significant at follow-up. Results provided evidence of the effectiveness of home- and community-based PABIR and that treatment effects were maintained at follow-up. Copyright © 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Personnel's Health Surveillance at Work: Effect of Age, Body Mass Index, and Shift Work on Mental Workload and Work Ability Index

PubMed Central

Safari, Shahram; Akbari, Jafar; Kazemi, Meghdad; Mououdi, Mohammad Amin; Mahaki, Behzad

2013-01-01

Introduction. Two great changes in developed countries are taking place: populations are ageing and becoming increasingly overweight. Combination of these factors with shift work is a risk factor for work ability and mental workload that are dynamic processes which change greatly throughout an individual's work life. The aim of this study was to investigate mental workload and work ability in textile workers and to identify factors which affect work ability and mental workload. Methods. This cross-sectional study was carried out among 194 male workers in textile industry. Employees based on their job group and work conditions have been divided into 6 categories. They completed work ability index and mental workload questionnaires during three work shifts. Body mass index (BMI) and demographic details were recorded. Results. All of the participants rated their work ability as moderate with high mental workload. The mean WAI and mental workload in age group were significant. The mean BMI was 25.5 kg/m2 (standard deviation 4.1) and the mean age was 40.22 years. There was a statistically significant correlation between work ability index and shift work. Conclusions. Unlike the previous study, a decrease point in WAI started in early age that may be due to life-style work and another psychological factor; on the other hand, NASA-TLX revealed high score in six subscales that can be another reason for low WAI. PMID:23956756

An improved growth intercept method for estimating site index of red pine.

Treesearch

David H. Alban

1972-01-01

Equations for predicting red pine (Pinus resinosa Ait.) site index from various internode lengths were developed from ring counts on sectioned trees form 69 natural stands in Minnesota. The precision of estimating site index was much improved by measuring the 5-year growth intercept beginning at 7 feet above the ground rather than at the conventional breast height....

Comparison of regression and geostatistical methods for mapping Leaf Area Index (LAI) with Landsat ETM+ data over a boreal forest.

Treesearch

Mercedes Berterretche; Andrew T. Hudak; Warren B. Cohen; Thomas K. Maiersperger; Stith T. Gower; Jennifer Dungan

2005-01-01

This study compared aspatial and spatial methods of using remote sensing and field data to predict maximum growing season leaf area index (LAI) maps in a boreal forest in Manitoba, Canada. The methods tested were orthogonal regression analysis (reduced major axis, RMA) and two geostatistical techniques: kriging with an external drift (KED) and sequential Gaussian...

Introductory Talk: Adding Up Chemicals: Component-Based Risk Assessment of Chemical Mixturesand Primary Talk: Grouping Chemicals for Assessment and Conducting Assessments with the Hazard Index and Related Methods

EPA Science Inventory

Dr. Simmons will provide a concise overview of established and emerging methods to group chemicals for component-based mixture risk assessments. This will be followed by introduction to several important component-based methods, the Hazard Index, Target Organ Hazard Index, Multi...

Comprehensive evaluation of global energy interconnection development index

NASA Astrophysics Data System (ADS)

Liu, Lin; Zhang, Yi

2018-04-01

Under the background of building global energy interconnection and realizing green and low-carbon development, this article constructed the global energy interconnection development index system which based on the current situation of global energy interconnection development. Through using the entropy method for the weight analysis of global energy interconnection development index, and then using gray correlation method to analyze the selected countries, this article got the global energy interconnection development index ranking and level classification.

Equivalences of the multi-indexed orthogonal polynomials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Odake, Satoru

2014-01-15

Multi-indexed orthogonal polynomials describe eigenfunctions of exactly solvable shape-invariant quantum mechanical systems in one dimension obtained by the method of virtual states deletion. Multi-indexed orthogonal polynomials are labeled by a set of degrees of polynomial parts of virtual state wavefunctions. For multi-indexed orthogonal polynomials of Laguerre, Jacobi, Wilson, and Askey-Wilson types, two different index sets may give equivalent multi-indexed orthogonal polynomials. We clarify these equivalences. Multi-indexed orthogonal polynomials with both type I and II indices are proportional to those of type I indices only (or type II indices only) with shifted parameters.

A comparison of indexing methods to evaluate quality of soils subjected to different erosion: the role of soil microbiological properties.

NASA Astrophysics Data System (ADS)

Romaniuk, Romina; Lidia, Giuffre; Alejandro, Costantini; Norberto, Bartoloni; Paolo, Nannipieri

2010-05-01

Soil quality assessment is needed to evaluate the soil conditions and sustainability of soil and crop management properties, and thus requires a systematic approach to select and interpret soil properties to be used as indicators. The aim of this work was to evaluate and compare different indexing methods to assess quality of an undisturbed grassland soil (UN), a degraded pasture soil (GL) and a no tilled soil (NT) with four different A horizon depths (25, 23, 19 and 14 cm) reflecting a diverse erosion. Twenty four soil properties were measured from 0 to10 (1) and 10 to 20 cm. (2) and a minimum data set was chosen by multivariate principal component analysis (PCA) considering all measured soil properties together (A), or according to their classification in physical, chemical or microbiological (B) properties. The measured soil properties involved either inexpensive or not laborious standard protocols, to be used in routine laboratory analysis (simple soil quality index - SSQI), or a more laborious, time consuming and expensive protocols to determine microbial diversity and microbial functionality by methyl ester fatty acids (PLFA) and catabolic response profiles (CRP), respectively (complex soil quality index - CSQI). The selected properties were linearly normalized and integrated by the weight additive method to calculate SSQI A, SSQI B, CSQI A and CSQI B indices. Two microbiological soil quality indices (MSQI) were also calculated: the MSQI 1 only considered microbiological properties according to the procedure used for calculating SQI; the MSQI 2 was calculated by considering microbial carbon biomass (MCB), microbial activity (Resp) and functional diversity determined by CPR (E). The soil quality indices were SSQI A = MCB 1 + Particulate Organic Carbon (POC)1 + Mean Weight Diameter (MWD)1; SSQI B = Saturated hydraulic conductivity (K) 1 + Total Organic Carbon (TOC) 1 + MCB 1; CSQI A = MCB 1 + POC 1 + MWD 1; CSQI B = K 1+ TOC 1+ 0.3 * (MCB 1+ i/a +POC 1) + 0

Variable Lifting Index (VLI)

PubMed Central

Waters, Thomas; Occhipinti, Enrico; Colombini, Daniela; Alvarez-Casado, Enrique; Fox, Robert

2015-01-01

Objective: We seek to develop a new approach for analyzing the physical demands of highly variable lifting tasks through an adaptation of the Revised NIOSH (National Institute for Occupational Safety and Health) Lifting Equation (RNLE) into a Variable Lifting Index (VLI). Background: There are many jobs that contain individual lifts that vary from lift to lift due to the task requirements. The NIOSH Lifting Equation is not suitable in its present form to analyze variable lifting tasks. Method: In extending the prior work on the VLI, two procedures are presented to allow users to analyze variable lifting tasks. One approach involves the sampling of lifting tasks performed by a worker over a shift and the calculation of the Frequency Independent Lift Index (FILI) for each sampled lift and the aggregation of the FILI values into six categories. The Composite Lift Index (CLI) equation is used with lifting index (LI) category frequency data to calculate the VLI. The second approach employs a detailed systematic collection of lifting task data from production and/or organizational sources. The data are organized into simplified task parameter categories and further aggregated into six FILI categories, which also use the CLI equation to calculate the VLI. Results: The two procedures will allow practitioners to systematically employ the VLI method to a variety of work situations where highly variable lifting tasks are performed. Conclusions: The scientific basis for the VLI procedure is similar to that for the CLI originally presented by NIOSH; however, the VLI method remains to be validated. Application: The VLI method allows an analyst to assess highly variable manual lifting jobs in which the task characteristics vary from lift to lift during a shift. PMID:26646300

Screening, cataloging and indexing of earth resource aircraft missions

NASA Technical Reports Server (NTRS)

1974-01-01

Data obtained from 30 earth resources aircraft missions, flown between September 1, 1973 and September 1, 1974, were screened, cataloged, and indexed using microfilm copy. The manhours required for completing the task are presented, and problems encountered during the project are reported. It is concluded that a cataloging and indexing report of remote sensor data can be prepared on a timely basis for a relatively low cost from microfilm. Recommendations are given in order to further facilitate the task.

Completed Research in Health, Physical Education and Recreation. Volume 20.

ERIC Educational Resources Information Center

Thomas, Jerry R., Ed.; Weiss, Raymond A., Ed.

This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1977. It is arranged in three parts. The index provides cross references for all listings in the second two parts, arranged under subject headings in alphabetical order. A bibliography gives a listing of published research,…

Precise determination of the refractive index of suspended particles: light transmission as a function of refractive index mismatch

NASA Astrophysics Data System (ADS)

McClymer, J. P.

2016-08-01

Many fluids appear white because refractive index differences lead to multiple scattering. In this paper, we use safe, low-cost commercial index matching fluids to quantitatively study light transmission as a function of index mismatch, reduce multiple scattering to allow single scattering probes, and to precisely determine the index of refraction of suspended material. The transmission profile is compared with Rayleigh-Gans and Mie theory predictions. The procedure is accessible as a student laboratory project, while providing advantages over other standard methods of measuring the refractive index of an unknown nanoparticle, making it valuable to researchers.

[Comparative analysis of impact factor and h-index for pharmacology journals].

PubMed

Bador, Pascal; Lafouge, Thierry

2010-01-01

Using the strictly same parameters (identical two publication years (2004-2005) and identical one-year citation window (2006)), impact factor (IF) 2006 was compared with h-index 2006 for one sample of "pharmacology and pharmacy" journals computed from the ISI Web of Science. For this sample, the IF and the h-index rankings of the journals are very different. The correlation coefficient between the IF and the h-index is low for "pharmacology and pharmacy" journals. The IF and h-index can be completely complementary when evaluating journals of the same scientific discipline. 2010 Société Française de Pharmacologie et de Thérapeutique.

Three-dimensional particle tracking in concave structures made by ultraviolet nanoimprint via total internal reflection fluorescence microscopy and refractive-index-matching method

NASA Astrophysics Data System (ADS)

Fujinami, Taku; Kigami, Hiroshi; Unno, Noriyuki; Taniguchi, Jun; Satake, Shin-ichi

2018-06-01

Total internal reflection fluorescence microscopy (TIRFM) is a promising method for measuring fluid flow close to a wall with nanoscale resolution in a process that is termed "multilayer nanoparticle image velocimetry" (MnPIV). TIRFM uses evanescent light that is generated on a substrate (typically a glass slide) by total internal reflection of light. Many researchers have previously studied x- y- z (3D) flows of water close to flat glass slides using MnPIV. On the other hand, a fluid flow close to a structured surface is also important. To measure flows of water near micro-patterns, we previously developed an MnPIV technique that uses a refractive-index-matching method. In previous study, the micropattern is made of a thermoplastic material with a refractive index that closely matches that of water. In this study, ultraviolet nanoimprint lithography was used for fabricating the appropriate micro-patterns because this technique can fabricate a pattern with a high resolution. As a result, we succeeded in performing MnPIV in water with a circular hole array pattern made by ultraviolet nanoimprint using a refractive-index-matching method. We believe that this technique will be helpful in elucidating fluid flows around microstructures.

Three-dimensional particle tracking in concave structures made by ultraviolet nanoimprint via total internal reflection fluorescence microscopy and refractive-index-matching method

NASA Astrophysics Data System (ADS)

Fujinami, Taku; Kigami, Hiroshi; Unno, Noriyuki; Taniguchi, Jun; Satake, Shin-ichi

2018-03-01

Total internal reflection fluorescence microscopy (TIRFM) is a promising method for measuring fluid flow close to a wall with nanoscale resolution in a process that is termed "multilayer nanoparticle image velocimetry" (MnPIV). TIRFM uses evanescent light that is generated on a substrate (typically a glass slide) by total internal reflection of light. Many researchers have previously studied x-y-z (3D) flows of water close to flat glass slides using MnPIV. On the other hand, a fluid flow close to a structured surface is also important. To measure flows of water near micro-patterns, we previously developed an MnPIV technique that uses a refractive-index-matching method. In previous study, the micropattern is made of a thermoplastic material with a refractive index that closely matches that of water. In this study, ultraviolet nanoimprint lithography was used for fabricating the appropriate micro-patterns because this technique can fabricate a pattern with a high resolution. As a result, we succeeded in performing MnPIV in water with a circular hole array pattern made by ultraviolet nanoimprint using a refractive-index-matching method. We believe that this technique will be helpful in elucidating fluid flows around microstructures.

A vertex similarity index for better personalized recommendation

NASA Astrophysics Data System (ADS)

Chen, Ling-Jiao; Zhang, Zi-Ke; Liu, Jin-Hu; Gao, Jian; Zhou, Tao

2017-01-01

Recommender systems benefit us in tackling the problem of information overload by predicting our potential choices among diverse niche objects. So far, a variety of personalized recommendation algorithms have been proposed and most of them are based on similarities, such as collaborative filtering and mass diffusion. Here, we propose a novel vertex similarity index named CosRA, which combines advantages of both the cosine index and the resource-allocation (RA) index. By applying the CosRA index to real recommender systems including MovieLens, Netflix and RYM, we show that the CosRA-based method has better performance in accuracy, diversity and novelty than some benchmark methods. Moreover, the CosRA index is free of parameters, which is a significant advantage in real applications. Further experiments show that the introduction of two turnable parameters cannot remarkably improve the overall performance of the CosRA index.

Simultaneous tensor decomposition and completion using factor priors.

PubMed

Chen, Yi-Lei; Hsu, Chiou-Ting; Liao, Hong-Yuan Mark

2014-03-01

The success of research on matrix completion is evident in a variety of real-world applications. Tensor completion, which is a high-order extension of matrix completion, has also generated a great deal of research interest in recent years. Given a tensor with incomplete entries, existing methods use either factorization or completion schemes to recover the missing parts. However, as the number of missing entries increases, factorization schemes may overfit the model because of incorrectly predefined ranks, while completion schemes may fail to interpret the model factors. In this paper, we introduce a novel concept: complete the missing entries and simultaneously capture the underlying model structure. To this end, we propose a method called simultaneous tensor decomposition and completion (STDC) that combines a rank minimization technique with Tucker model decomposition. Moreover, as the model structure is implicitly included in the Tucker model, we use factor priors, which are usually known a priori in real-world tensor objects, to characterize the underlying joint-manifold drawn from the model factors. By exploiting this auxiliary information, our method leverages two classic schemes and accurately estimates the model factors and missing entries. We conducted experiments to empirically verify the convergence of our algorithm on synthetic data and evaluate its effectiveness on various kinds of real-world data. The results demonstrate the efficacy of the proposed method and its potential usage in tensor-based applications. It also outperforms state-of-the-art methods on multilinear model analysis and visual data completion tasks.

Neural network based chemical structure indexing.

PubMed

Rughooputh, S D; Rughooputh, H C

2001-01-01

Searches on chemical databases are presently dominated by the text-based content of a paper which can be indexed into a keyword searchable form. Such traditional searches can prove to be very time-consuming and discouraging to the less frequent scientist. We report a simple chemical indexing based on the molecular structure alone. The method used is based on a one-to-one correspondence between the chemical structure presented as an image to a neural network and the corresponding binary output. The method is direct and less cumbersome (compared with traditional methods) and proves to be robust, elegant, and very versatile.

EJSCREEN Version 1, EJ Index Alternatives

EPA Pesticide Factsheets

This map service displays alternative environmental justice (EJ) indexes used in EJSCREEN. The alternative EJ indexes combine each of the 12 environmental indicators and one of two demographic indexes using different methods than the Primary EJ Index. EJ Index Alternative 1 is a combination of a blockgroup environmental factor, the populaiton of the blockgroup, and the demographic index. This EJ Index measures how much a particular place contributes to the total burden faced by subpopulations highlighted by the demographic index. EJ Index Alternative 2 is a combination of a blockgroup environmental factor and the demographic index. Two options are presented for both EJ Index Alternative 1 and Alternative 2-- they are combined with the primary demographic index and alternative demographic index. EJSCREEN is an environmental justice screening tool that provides EPA with a nationally consistent approach to screening for potential areas of EJ concern that may warrant further investigation. The EJ indexes are block group level results that combine multiple demographic factors with a single environmental variable (such as proximity to traffic) that can be used to help identify communities living with the greatest potential for negative environmental and health effects. The EJSCREEN tool is currently for internal EPA use only. It is anticipated that as users become accustomed to this new tool, individual programs within the Agency will develop program use guidelines a

A Revaluation of Indexes of Residential Segregation

ERIC Educational Resources Information Center

Winship, Christopher

1977-01-01

Shows that there are at least two different perspectives from which residential segregation can be examined. Segregation can be measured as it deviates from a situation of complete desegregation or in terms of a situation in which there is random segregation in the city. New criteria for indexes of residential segregation are developed. (Author/JM)

Determining the best forecasting method to estimate unitary charges price indexes of PFI data in central region Peninsular Malaysia

NASA Astrophysics Data System (ADS)

Ahmad Kamaruddin, Saadi Bin; Md Ghani, Nor Azura; Mohamed Ramli, Norazan

2013-04-01

The concept of Private Financial Initiative (PFI) has been implemented by many developed countries as an innovative way for the governments to improve future public service delivery and infrastructure procurement. However, the idea is just about to germinate in Malaysia and its success is still vague. The major phase that needs to be given main attention in this agenda is value for money whereby optimum efficiency and effectiveness of each expense is attained. Therefore, at the early stage of this study, estimating unitary charges or materials price indexes in each region in Malaysia was the key objective. This particular study aims to discover the best forecasting method to estimate unitary charges price indexes in construction industry by different regions in the central region of Peninsular Malaysia (Selangor, Federal Territory of Kuala Lumpur, Negeri Sembilan, and Melaka). The unitary charges indexes data used were from year 2002 to 2011 monthly data of different states in the central region Peninsular Malaysia, comprising price indexes of aggregate, sand, steel reinforcement, ready mix concrete, bricks and partition, roof material, floor and wall finishes, ceiling, plumbing materials, sanitary fittings, paint, glass, steel and metal sections, timber and plywood. At the end of the study, it was found that Backpropagation Neural Network with linear transfer function produced the most accurate and reliable results for estimating unitary charges price indexes in every states in central region Peninsular Malaysia based on the Root Mean Squared Errors, where the values for both estimation and evaluation sets were approximately zero and highly significant at p < 0.01. Therefore, artificial neural network is sufficient to forecast construction materials price indexes in Malaysia. The estimated price indexes of construction materials will contribute significantly to the value for money of PFI as well as towards Malaysian economical growth.

Energy Index For Aircraft Maneuvers

NASA Technical Reports Server (NTRS)

Chidester, Thomas R. (Inventor); Lynch, Robert E. (Inventor); Lawrence, Robert E. (Inventor); Amidan, Brett G. (Inventor); Ferryman, Thomas A. (Inventor); Drew, Douglas A. (Inventor); Ainsworth, Robert J. (Inventor); Prothero, Gary L. (Inventor); Romanowski, Tomothy P. (Inventor); Bloch, Laurent (Inventor)

2006-01-01

Method and system for analyzing, separately or in combination, kinetic energy and potential energy and/or their time derivatives, measured or estimated or computed, for an aircraft in approach phase or in takeoff phase, to determine if the aircraft is or will be put in an anomalous configuration in order to join a stable approach path or takeoff path. A 3 reference value of kinetic energy andor potential energy (or time derivatives thereof) is provided, and a comparison index .for the estimated energy and reference energy is computed and compared with a normal range of index values for a corresponding aircraft maneuver. If the computed energy index lies outside the normal index range, this phase of the aircraft is identified as anomalous, non-normal or potentially unstable.

Indexing, screening, coding and cataloging of earth resources aircraft mission data

NASA Technical Reports Server (NTRS)

1977-01-01

Tasks completed are as follows: (1) preparation of large Area Crop Inventory experiment for data base entry;(2) preparation of Earth Observations Aircraft Flight summary reports for publication; (3) updating of the aircraft mission index coverage map and Ames aircraft flight map; (4) Prepared of Earth Observation Helicopter Flight reports for publication; and (5) indexing of LANDSAT imagery. (6) formulation of phase 3 biowindows 1, 2, 3, and 4 listings by country, footprint, and acqusition dates; (7) preparation of flight summary reports; and (8) preparation of an Alaska state index coverage map.

Development and assessment of users' satisfaction with the systemic lupus erythematosus disease activity index 2000 responder index-50 website.

PubMed

Touma, Zahi; Gladman, Dafna D; MacKinnon, Anne; Carette, Simon; Abu-Shakra, Mahmoud; Askanase, Anca; Nived, Ola; Hanly, John G; Landolt-Marticorena, Carolina; Tam, Lai-Shan; Toloza, Sergio; Nikpour, Mandana; Riddell, Claire; Steiman, Amanda; Eder, Lihi; Haddad, Amir; Barber, Claire; Urowitz, Murray B

2013-01-01

To describe the development of the Systemic Lupus Erythematosus Disease Activity Index 2000 Responder Index-50 (S2K RI-50) Website (www.s2k-ri-50.com) and to assess satisfaction with its training and examination modules among rheumatologists and rheumatology fellows. The development of the Website occurred in 3 phases. The first was a deployment phase that consisted of preparing the site map along with its content. The content included the S2K RI-50 training manual, the tests and corresponding question bank, and the online adaptive training module, along with the extensive site testing. The second phase included the participation of rheumatologists and trainees who completed the Website modules. The third was a quality assurance phase in which an online survey was developed to determine the satisfaction level of its users. Further modifications were implemented per participants' recommendations. The site has been online since it was registered in September 2010. Fourteen rheumatologists and rheumatology trainees from different centers reviewed and completed the material contained in the Website. The survey revealed acceptance among rheumatologists for the Website's content, design, and presentation. The Website was rated as user-friendly and useful in familiarizing investigators with the S2K RI-50. After completion of the training and examination modules, participants reported a suitable level of preparation to implement the S2K RI-50 in clinical trials and research settings in a timely manner. The Website includes training and examination modules that familiarize rheumatologists with the S2K RI-50 and assesses their competence to use the index. This prepares them for the use of the S2K RI-50 in clinical trials and research settings.

Five preference-based indexes in cataract and heart failure patients were not equally responsive to change.

PubMed

Kaplan, Robert M; Tally, Steven; Hays, Ron D; Feeny, David; Ganiats, Theodore G; Palta, Mari; Fryback, Dennis G

2011-05-01

To compare the responsiveness to clinical change of five widely used preference-based health-related quality-of-life indexes in two longitudinal cohorts. Five generic instruments were simultaneously administered to 376 adults undergoing cataract surgery and 160 adults in heart failure management programs. Patients were assessed at baseline and reevaluated after 1 and 6 months. The measures were the Short Form (SF)-6D (based on responses scored from SF-36v2), Self-Administered Quality of Well-being Scale (QWB-SA), the EuroQol-5D developed by the EuroQol Group, the Health Utilities Indexes Mark 2 (HUI2) and Mark 3 (HUI3). Cataract patients completed the National Eye Institute Visual Functioning Questionnaire-25, and heart failure patients completed the Minnesota Living with Heart Failure Questionnaire. Responsiveness was estimated by the standardized response mean. For cataract patients, mean changes between baseline and 1-month follow-up for the generic indices ranged from 0.00 (SF-6D) to 0.052 (HUI3) and were statistically significant for all indexes except the SF-6D. For heart failure patients, only the SF-6D showed significant change from baseline to 1 month, whereas only the QWB-SA change was significant between 1 and 6 months. Preference-based methods for measuring health outcomes are not equally responsive to change. Copyright © 2011 Elsevier Inc. All rights reserved.

The NLM Indexing Initiative's Medical Text Indexer.

PubMed

Aronson, Alan R; Mork, James G; Gay, Clifford W; Humphrey, Susanne M; Rogers, Willie J

2004-01-01

The Medical Text Indexer (MTI) is a program for producing MeSH indexing recommendations. It is the major product of NLM's Indexing Initiative and has been used in both semi-automated and fully automated indexing environments at the Library since mid 2002. We report here on an experiment conducted with MEDLINE indexers to evaluate MTI's performance and to generate ideas for its improvement as a tool for user-assisted indexing. We also discuss some filtering techniques developed to improve MTI's accuracy for use primarily in automatically producing the indexing for several abstracts collections.

C-point and V-point singularity lattice formation and index sign conversion methods

NASA Astrophysics Data System (ADS)

Kumar Pal, Sushanta; Ruchi; Senthilkumaran, P.

2017-06-01

The generic singularities in an ellipse field are C-points namely stars, lemons and monstars in a polarization distribution with C-point indices (-1/2), (+1/2) and (+1/2) respectively. Similar to C-point singularities, there are V-point singularities that occur in a vector field and are characterized by Poincare-Hopf index of integer values. In this paper we show that the superposition of three homogenously polarized beams in different linear states leads to the formation of polarization singularity lattice. Three point sources at the focal plane of the lens are used to create three interfering plane waves. A radial/azimuthal polarization converter (S-wave plate) placed near the focal plane modulates the polarization states of the three beams. The interference pattern is found to host C-points and V-points in a hexagonal lattice. The C-points occur at intensity maxima and V-points occur at intensity minima. Modulating the state of polarization (SOP) of three plane waves from radial to azimuthal does not essentially change the nature of polarization singularity lattice as the Poincare-Hopf index for both radial and azimuthal polarization distributions is (+1). Hence a transformation from a star to a lemon is not trivial, as such a transformation requires not a single SOP change, but a change in whole spatial SOP distribution. Further there is no change in the lattice structure and the C- and V-points appear at locations where they were present earlier. Hence to convert an interlacing star and V-point lattice into an interlacing lemon and V-point lattice, the interferometer requires modification. We show for the first time a method to change the polarity of C-point and V-point indices. This means that lemons can be converted into stars and stars can be converted into lemons. Similarly the positive V-point can be converted to negative V-point and vice versa. The intensity distribution in all these lattices is invariant as the SOPs of the three beams are changed in an

Estimating red pine site index in northern Minnesota.

Treesearch

1976-01-01

Methods are presented for estimating red pine site index from the height growth of red pine, site index of several associated species (jack pine, white pine, white spruce, or quaking aspen), and from easily measured soil properties. The restrictions and limitations of each method and their relative precision are discussed.

An Absolute Index (Ab-index) to Measure a Researcher’s Useful Contributions and Productivity

PubMed Central

Biswal, Akshaya Kumar

2013-01-01

Bibliographic analysis has been a very powerful tool in evaluating the effective contributions of a researcher and determining his/her future research potential. The lack of an absolute quantification of the author’s scientific contributions by the existing measurement system hampers the decision-making process. In this paper, a new metric system, Absolute index (Ab-index), has been proposed that allows a more objective comparison of the contributions of a researcher. The Ab-index takes into account the impact of research findings while keeping in mind the physical and intellectual contributions of the author(s) in accomplishing the task. The Ab-index and h-index were calculated for 10 highly cited geneticists and molecular biologist and 10 young researchers of biological sciences and compared for their relationship to the researchers input as a primary author. This is the first report of a measuring method clarifying the contributions of the first author, corresponding author, and other co-authors and the sharing of credit in a logical ratio. A java application has been developed for the easy calculation of the Ab-index. It can be used as a yardstick for comparing the credibility of different scientists competing for the same resources while the Productivity index (Pr-index), which is the rate of change in the Ab-index per year, can be used for comparing scientists of different age groups. The Ab-index has clear advantage over other popular metric systems in comparing scientific credibility of young scientists. The sum of the Ab-indices earned by individual researchers of an institute per year can be referred to as Pr-index of the institute. PMID:24391941

The Dutch Healthy Diet index (DHD-index): an instrument to measure adherence to the Dutch Guidelines for a Healthy Diet.

PubMed

van Lee, Linde; Geelen, Anouk; van Huysduynen, Eveline J C Hooft; de Vries, Jeanne H M; van't Veer, Pieter; Feskens, Edith J M

2012-07-20

The objective was to develop an index based on the Dutch Guidelines for a healthy Diet of 2006 that reflects dietary quality and to apply it to the Dutch National Food Consumption Survey (DNFCS) to examine the associations with micronutrient intakes. A total of 749 men and women, aged 19-30 years, contributed two 24-hour recalls and additional questionnaires in the DNFCS of 2003. The Dutch Healthy Diet index (DHD-index) includes ten components representing the ten Dutch Guidelines for a Healthy Diet. Per component the score ranges between zero and ten, resulting in a total score between zero (no adherence) and 100 (complete adherence). The mean ± SD of the DHD-index was 60.4 ± 11.5 for women and 57.8 ± 10.8 for men (P for difference = 0.002). Each component score increased across the sex-specific quintiles of the DHD-index. An inverse association was observed between the sex-specific quintiles of the DHD-index and total energy intake. Calcium, riboflavin, and vitamin E intake decreased with increasing DHD-index, an inverse association which disappeared after energy adjustment. Vitamin C showed a positive association across quintiles, also when adjusted for energy. For folate, iron, magnesium, potassium, thiamin, and vitamin B6 a positive association emerged after adjustment for energy. The DHD-index is capable of ranking participants according to their adherence to the Dutch Guidelines for a Healthy Diet by reflecting variation in nine out of ten components that constitute the index when based on two 24-hour recalls. Furthermore, the index showed to be a good measure of nutrient density of diets.

Intelligent condition monitoring method for bearing faults from highly compressed measurements using sparse over-complete features

NASA Astrophysics Data System (ADS)

Ahmed, H. O. A.; Wong, M. L. D.; Nandi, A. K.

2018-01-01

Condition classification of rolling element bearings in rotating machines is important to prevent the breakdown of industrial machinery. A considerable amount of literature has been published on bearing faults classification. These studies aim to determine automatically the current status of a roller element bearing. Of these studies, methods based on compressed sensing (CS) have received some attention recently due to their ability to allow one to sample below the Nyquist sampling rate. This technology has many possible uses in machine condition monitoring and has been investigated as a possible approach for fault detection and classification in the compressed domain, i.e., without reconstructing the original signal. However, previous CS based methods have been found to be too weak for highly compressed data. The present paper explores computationally, for the first time, the effects of sparse autoencoder based over-complete sparse representations on the classification performance of highly compressed measurements of bearing vibration signals. For this study, the CS method was used to produce highly compressed measurements of the original bearing dataset. Then, an effective deep neural network (DNN) with unsupervised feature learning algorithm based on sparse autoencoder is used for learning over-complete sparse representations of these compressed datasets. Finally, the fault classification is achieved using two stages, namely, pre-training classification based on stacked autoencoder and softmax regression layer form the deep net stage (the first stage), and re-training classification based on backpropagation (BP) algorithm forms the fine-tuning stage (the second stage). The experimental results show that the proposed method is able to achieve high levels of accuracy even with extremely compressed measurements compared with the existing techniques.

Prognostic validation of the body mass index, airflow obstruction, dyspnea, and exercise capacity (BODE) index in inoperable non-small-cell lung cancer.

PubMed

Denehy, Linda; Hornsby, Whitney E; Herndon, James E; Thomas, Samantha; Ready, Neal E; Granger, Catherine L; Valera, Lauren; Kenjale, Aarti A; Eves, Neil D; Jones, Lee W

2013-12-01

To investigate the prognostic utility of the body mass index, severity of airflow obstruction, measures of exertional dyspnea, and exercise capacity (BODE) index in patients with inoperable non-small-cell lung cancer (NSCLC). One hundred consecutive patients with inoperable NSCLC and performance status 0 to 3 completed pulmonary function testing, the modified Medical Research Council dyspnea scale, a 6-minute walk test, and body mass index-the multidimensional 10-point BODE index. Cox proportional models were used to estimate the risk of all-cause mortality according to the BODE index with or without adjustment for traditional prognostic factors. Median follow-up was 31.5 months; 61 deaths (61%) were reported during this period. There was a significant univariate association between the BODE index score and mortality (adjusted p(trend) = 0.027). Compared with patients with a BODE index of 0, the adjusted hazard ratio for risk of death was 1.37 (95% confidence interval [CI], 0.74-2.55) for a BODE index of 1, 1.22 (95% CI, 0.45-3.25) for a BODE index of 2, and 2.44 (95% CI, 1.19-4.99) for a BODE index more than 2. The BODE index provided incremental prognostic information beyond that provided traditional markers of prognosis (adjusted p(trend) = 0.051). Every one-point increase in the BODE index, the risk of death increased by 25% (hazard ratio = 1.25; 95% CI, 1.27-4.64). The BODE index is a strong independent predictor of survival in inoperable NSCLC beyond traditional risk factors. Use of this multidimensional tool may improve risk stratification and prognostication in NSCLC.

Economic Evaluation of Complete Revascularization for Patients with Multivessel Disease Undergoing Primary Percutaneous Coronary Intervention.

PubMed

Barton, Garry R; Irvine, Lisa; Flather, Marcus; McCann, Gerry P; Curzen, Nick; Gershlick, Anthony H

2017-06-01

To determine the cost-effectiveness of complete revascularization at index admission compared with infarct-related artery (IRA) treatment only, in patients with multivessel disease undergoing primary percutaneous coronary intervention (P-PCI) for ST-segment elevation myocardial infarction. An economic evaluation of a multicenter randomized trial was conducted, comparing complete revascularization at index admission to IRA-only P-PCI in patients with multivessel disease (12-month follow-up). Overall hospital costs (costs for P-PCI procedure(s), hospital length of stay, and any subsequent re-admissions) were estimated. Outcomes were major adverse cardiac events (MACEs, a composite of all-cause death, recurrent myocardial infarction, heart failure, and ischemia-driven revascularization) and quality-adjusted life-years (QALYs) derived from the three-level EuroQol five-dimensional questionnaire. Multiple imputation was undertaken. The mean incremental cost and effect, with associated 95% confidence intervals, the incremental cost-effectiveness ratio, and the cost-effectiveness acceptability curve were estimated. On the basis of 296 patients, the mean incremental overall hospital cost for complete revascularization was estimated to be -£215.96 (-£1390.20 to £958.29), compared with IRA-only, with a per-patient mean reduction in MACEs of 0.170 (0.044 to 0.296) and a QALY gain of 0.011 (-0.019 to 0.041). According to the cost-effectiveness acceptability curve, the probability of complete revascularization being cost-effective was estimated to be 72.0% at a willingness-to-pay threshold value of £20,000 per QALY. Complete revascularization at index admission was estimated to be more effective (in terms of MACEs and QALYs) and cost-effective (overall costs were estimated to be lower and complete revascularization thereby dominated IRA-only). There was, however, some uncertainty associated with this decision. Copyright © 2017 International Society for Pharmacoeconomics and

Simultaneous Tensor Decomposition and Completion Using Factor Priors.

PubMed

Chen, Yi-Lei; Hsu, Chiou-Ting Candy; Liao, Hong-Yuan Mark

2013-08-27

Tensor completion, which is a high-order extension of matrix completion, has generated a great deal of research interest in recent years. Given a tensor with incomplete entries, existing methods use either factorization or completion schemes to recover the missing parts. However, as the number of missing entries increases, factorization schemes may overfit the model because of incorrectly predefined ranks, while completion schemes may fail to interpret the model factors. In this paper, we introduce a novel concept: complete the missing entries and simultaneously capture the underlying model structure. To this end, we propose a method called Simultaneous Tensor Decomposition and Completion (STDC) that combines a rank minimization technique with Tucker model decomposition. Moreover, as the model structure is implicitly included in the Tucker model, we use factor priors, which are usually known a priori in real-world tensor objects, to characterize the underlying joint-manifold drawn from the model factors. We conducted experiments to empirically verify the convergence of our algorithm on synthetic data, and evaluate its effectiveness on various kinds of real-world data. The results demonstrate the efficacy of the proposed method and its potential usage in tensor-based applications. It also outperforms state-of-the-art methods on multilinear model analysis and visual data completion tasks.

Formation of bulk refractive index structures

DOEpatents

Potter, Jr., Barrett George; Potter, Kelly Simmons; Wheeler, David R.; Jamison, Gregory M.

2003-07-15

A method of making a stacked three-dimensional refractive index structure in photosensitive materials using photo-patterning where first determined is the wavelength at which a photosensitive material film exhibits a change in refractive index upon exposure to optical radiation, a portion of the surfaces of the photosensitive material film is optically irradiated, the film is marked to produce a registry mark. Multiple films are produced and aligned using the registry marks to form a stacked three-dimensional refractive index structure.

A Massively Parallel Computational Method of Reading Index Files for SOAPsnv.

PubMed

Zhu, Xiaoqian; Peng, Shaoliang; Liu, Shaojie; Cui, Yingbo; Gu, Xiang; Gao, Ming; Fang, Lin; Fang, Xiaodong

2015-12-01

SOAPsnv is the software used for identifying the single nucleotide variation in cancer genes. However, its performance is yet to match the massive amount of data to be processed. Experiments reveal that the main performance bottleneck of SOAPsnv software is the pileup algorithm. The original pileup algorithm's I/O process is time-consuming and inefficient to read input files. Moreover, the scalability of the pileup algorithm is also poor. Therefore, we designed a new algorithm, named BamPileup, aiming to improve the performance of sequential read, and the new pileup algorithm implemented a parallel read mode based on index. Using this method, each thread can directly read the data start from a specific position. The results of experiments on the Tianhe-2 supercomputer show that, when reading data in a multi-threaded parallel I/O way, the processing time of algorithm is reduced to 3.9 s and the application program can achieve a speedup up to 100×. Moreover, the scalability of the new algorithm is also satisfying.

Measuring the Index of Refraction.

ERIC Educational Resources Information Center

Phelps, F. M., III; Jacobson, B. S.

1980-01-01

Presents two methods for measuring the index of refraction of glass or lucite. These two methods, used in the freshman laboratory, are based on the fact that a ray of light inside a block will be refracted parallel to the surface. (HM)

Index of cyber integrity

NASA Astrophysics Data System (ADS)

Anderson, Gustave

2014-05-01

Unfortunately, there is no metric, nor set of metrics, that are both general enough to encompass all possible types of applications yet specific enough to capture the application and attack specific details. As a result we are left with ad-hoc methods for generating evaluations of the security of our systems. Current state of the art methods for evaluating the security of systems include penetration testing and cyber evaluation tests. For these evaluations, security professionals simulate an attack from malicious outsiders and malicious insiders. These evaluations are very productive and are able to discover potential vulnerabilities resulting from improper system configuration, hardware and software flaws, or operational weaknesses. We therefore propose the index of cyber integrity (ICI), which is modeled after the index of biological integrity (IBI) to provide a holistic measure of the health of a system under test in a cyber-environment. The ICI provides a broad base measure through a collection of application and system specific metrics. In this paper, following the example of the IBI, we demonstrate how a multi-metric index may be used as a holistic measure of the health of a system under test in a cyber-environment.

Environmental Chemistry Methods (ECM) Index - Q

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with Q as the first character.

Environmental Chemistry Methods (ECM) Index - D

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with D as the first character.

Environmental Chemistry Methods (ECM) Index - N

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with N as the first character.

Environmental Chemistry Methods (ECM) Index - P

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with P as the first character.

Environmental Chemistry Methods (ECM) Index - L

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with L as the first character.

Environmental Chemistry Methods (ECM) Index - T

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with T as the first character.

Environmental Chemistry Methods (ECM) Index - A

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with A as the first character.

Environmental Chemistry Methods (ECM) Index - E

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with E as the first character.

Environmental Chemistry Methods (ECM) Index - O

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with O as the first character.

Environmental Chemistry Methods (ECM) Index - Z

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with Z as the first character.

Environmental Chemistry Methods (ECM) Index - I

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with I as the first character.

Environmental Chemistry Methods (ECM) Index - S

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with S as the first character.

Environmental Chemistry Methods (ECM) Index - K

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with K as the first character.

Environmental Chemistry Methods (ECM) Index - R

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with R as the first character.

Environmental Chemistry Methods (ECM) Index - G

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with G as the first character.

Environmental Chemistry Methods (ECM) Index - F

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with F as the first character.

Environmental Chemistry Methods (ECM) Index - B

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with B as the first character.

Environmental Chemistry Methods (ECM) Index - M

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with M as the first character.

Environmental Chemistry Methods (ECM) Index - C

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with C as the first character.

Environmental Chemistry Methods (ECM) Index - H

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with H as the first character.

Structator: fast index-based search for RNA sequence-structure patterns

PubMed Central

2011-01-01

stem-loop substructures can be described by multiple sequence-structure patterns and their matches are efficiently handled by a novel chaining method. Beyond our algorithmic contributions, we provide with Structator a complete and robust open-source software solution for index-based search of RNA sequence-structure patterns. The Structator software is available at http://www.zbh.uni-hamburg.de/Structator. PMID:21619640

Water Quality Assessment for Deep-water Channel area of Guangzhou Port based on the Comprehensive Water Quality Identification Index Method

NASA Astrophysics Data System (ADS)

Chen, Yi

2018-03-01

The comprehensive water quality identification index method is able to assess the general water quality situation comprehensively and represent the water quality classification; water environment functional zone achieves pollution level and standard objectively and systematically. This paper selects 3 representative zones along deep-water channel of Guangzhou port and applies comprehensive water quality identification index method to calculate sea water quality monitoring data for different selected zones from year 2006 to 2014, in order to investigate the temporal variation of water quality along deep-water channel of Guangzhou port. The comprehensive water quality level from north to south presents an increased trend, and the water quality of the three zones in 2014 is much better than in 2006. This paper puts forward environmental protection measurements and suggestions for Pearl River Estuary, provides data support and theoretical basis for studied sea area pollution prevention and control.

Construction and validation of a measure of integrative well-being in seven languages: The Pemberton Happiness Index

PubMed Central

2013-01-01

Purpose We introduce the Pemberton Happiness Index (PHI), a new integrative measure of well-being in seven languages, detailing the validation process and presenting psychometric data. The scale includes eleven items related to different domains of remembered well-being (general, hedonic, eudaimonic, and social well-being) and ten items related to experienced well-being (i.e., positive and negative emotional events that possibly happened the day before); the sum of these items produces a combined well-being index. Methods A distinctive characteristic of this study is that to construct the scale, an initial pool of items, covering the remembered and experienced well-being domains, were subjected to a complete selection and validation process. These items were based on widely used scales (e.g., PANAS, Satisfaction With Life Scale, Subjective Happiness Scale, and Psychological Well-Being Scales). Both the initial items and reference scales were translated into seven languages and completed via Internet by participants (N = 4,052) aged 16 to 60 years from nine countries (Germany, India, Japan, Mexico, Russia, Spain, Sweden, Turkey, and USA). Results Results from this initial validation study provided very good support for the psychometric properties of the PHI (i.e., internal consistency, a single-factor structure, and convergent and incremental validity). Conclusions Given the PHI’s good psychometric properties, this simple and integrative index could be used as an instrument to monitor changes in well-being. We discuss the utility of this integrative index to explore well-being in individuals and communities. PMID:23607679

USGS 1-min Dst index

USGS Publications Warehouse

Gannon, J.L.; Love, J.J.

2011-01-01

We produce a 1-min time resolution storm-time disturbance index, the USGS Dst, called Dst8507-4SM. This index is based on minute resolution horizontal magnetic field intensity from low-latitude observatories in Honolulu, Kakioka, San Juan and Hermanus, for the years 1985-2007. The method used to produce the index uses a combination of time- and frequency-domain techniques, which more clearly identifies and excises solar-quiet variation from the horizontal intensity time series of an individual station than the strictly time-domain method used in the Kyoto Dst index. The USGS 1-min Dst is compared against the Kyoto Dst, Kyoto Sym-H, and the USGS 1-h Dst (Dst5807-4SH). In a time series comparison, Sym-H is found to produce more extreme values during both sudden impulses and main phase maximum deviation, possibly due to the latitude of its contributing observatories. Both Kyoto indices are shown to have a peak in their distributions below zero, while the USGS indices have a peak near zero. The USGS 1-min Dst is shown to have the higher time resolution benefits of Sym-H, while using the more typical low-latitude observatories of Kyoto Dst. ?? 2010.

Experimental investigation of gas flow rate and electric field effect on refractive index and electron density distribution of cold atmospheric pressure-plasma by optical method, Moiré deflectometry

NASA Astrophysics Data System (ADS)

Khanzadeh, Mohammad; Jamal, Fatemeh; Shariat, Mahdi

2018-04-01

Nowadays, cold atmospheric-pressure (CAP) helium plasma jets are widely used in material processing devices in various industries. Researchers often use indirect and spectrometric methods for measuring the plasma parameters which are very expensive. In this paper, for the first time, characterization of CAP, i.e., finding its parameters such as refractive index and electron density distribution, was carried out using an optical method, Moiré deflectometry. This method is a wave front analysis technique based on geometric optics. The advantages of this method are simplicity, high accuracy, and low cost along with the non-contact, non-destructive, and direct measurement of CAP parameters. This method demonstrates that as the helium gas flow rate decreases, the refractive index increases. Also, we must note that the refractive index is larger in the gas flow consisting of different flow rates of plasma comparing with the gas flow without the plasma.

RATIONAL DETERMINATION METHOD OF PROBABLE FREEZING INDEX FOR n-YEARS CONSIDERING THE REGIONAL CHARACTERISTICS

NASA Astrophysics Data System (ADS)

Kawabata, Shinichiro; Hayashi, Keiji; Kameyama, Shuichi

This paper investigates a method for ob taining the probable freezing index for n -years from past frostaction damage and meteorological data. From investigati on of Japanese cold winter data from the areas of Hokkaido, Tohoku and south of Tohoku, it was found that the extent of cold winter had regularity by location south or north. Also, after obtaining return periods of cold winters by area, obvious regional characteristics were found. Mild winters are rare in Hokkaido. However, it was clarified that when Hokkaido had cold winters, its size increased. It wa s effective to determine the probable freezing indices as 20-, 15- and 10-year return periods for Hokkaido, Tohoku and south of Tohoku, respectively.

Enhancing maximum measurable sound reduction index using sound intensity method and strong receiving room absorption.

PubMed

Hongisto, V; Lindgren, M; Keränen, J

2001-01-01

The sound intensity method is usually recommended instead of the pressure method in the presence of strong flanking transmission. Especially when small and/or heavy specimens are tested, the flanking often causes problems in laboratories practicing only the pressure method. The purpose of this study was to determine experimentally the difference between the maximum sound reduction indices obtained by the intensity method, RI,max, and by the pressure method, Rmax. In addition, the influence of adding room absorption to the receiving room was studied. The experiments were carried out in an ordinary two-room test laboratory. The exact value of RI,max was estimated by applying a fitting equation to the measured data points. The fitting equation involved the dependence of the pressure-intensity indicator on measured acoustical parameters. In an empty receiving room, the difference between RI,max and Rmax was 4-15 dB, depending on frequency. When the average reverberation time was reduced from 3.5 to 0.6 s, the values of RI,max increased by 2-10 dB compared to the results in the empty room. Thus, it is possible to measure wall structures having 9-22 dB better sound reduction index using the intensity method than with the pressure method. This facilitates the measurements of small and/or heavy specimens in the presence of flanking. Moreover, when new laboratories are designed, the intensity method is an alternative to the pressure method which presupposes expensive isolation structures between the rooms.

Automatic inference of indexing rules for MEDLINE

PubMed Central

Névéol, Aurélie; Shooshan, Sonya E; Claveau, Vincent

2008-01-01

Background: Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. Methods: In this paper, we describe the use and the customization of Inductive Logic Programming (ILP) to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Results: Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI), a system producing automatic indexing recommendations for MEDLINE. Conclusion: We expect the sets of ILP rules obtained in this experiment to be integrated into MTI. PMID:19025687

Highly Cited Occupational Therapy Articles in the Science Citation Index Expanded and Social Sciences Citation Index: A Bibliometric Analysis.

PubMed

Brown, Ted; Gutman, Sharon A; Ho, Yuh-Shan; Fong, Kenneth N K

A bibliometric analysis was completed of highly cited occupational therapy literature and authors published from 1991 to 2014 and accessible in the Science Citation Index Expanded (SCI-Expanded) and Social Sciences Citation Index (SSCI) databases. Data were obtained from the SCI-Expanded and SSCI. Articles referenced >100 times were categorized as highly cited articles (HCA). Of 6,486 articles found, 31 were categorized as HCA. The American Journal of Occupational Therapy published the largest number of HCA (n = 8; 26%). The 31 HCA were distributed across seven countries: United States (20 articles), Canada (3), United Kingdom (3), Australia (2), the Netherlands (1), New Zealand (1), and Sweden (1). The three authors with the highest Y-index were S. J. Page, F. Clark, and W. Dunn. A latency period of 4 to 5 yr post-publication appears to be needed for a journal article to gain citations. Copyright © 2017 by the American Occupational Therapy Association, Inc.

A real-time Global Warming Index.

PubMed

Haustein, K; Allen, M R; Forster, P M; Otto, F E L; Mitchell, D M; Matthews, H D; Frame, D J

2017-11-13

We propose a simple real-time index of global human-induced warming and assess its robustness to uncertainties in climate forcing and short-term climate fluctuations. This index provides improved scientific context for temperature stabilisation targets and has the potential to decrease the volatility of climate policy. We quantify uncertainties arising from temperature observations, climate radiative forcings, internal variability and the model response. Our index and the associated rate of human-induced warming is compatible with a range of other more sophisticated methods to estimate the human contribution to observed global temperature change.

An Index to All "Query" Computer Searches Completed from July 1973 to June 1974. Search Number 0403-0619. Information Series No. 24.

ERIC Educational Resources Information Center

Wilder, Dolores J., Comp.; Hines, Rella, Comp.

The Tennessee Research Coordinating Unit (RCU) has implemented a computerized information retrieval system known as "Query," which allows for the retrieval of documents indexed in Research in Education (RIE), Current Index to Journals in Education (CIJE), and Abstracts of Instructional and Research Materials (AIM/ARM). The document…

An Analytical Study on an Orthodontic Index: Index of Complexity, Outcome and Need (ICON)

PubMed Central

Torkan, Sepide; Pakshir, Hamid Reza; Fattahi, Hamid Reza; Oshagh, Morteza; Momeni Danaei, Shahla; Salehi, Parisa; Hedayati, Zohreh

2015-01-01

Statement of the Problem The validity of the Index of Complexity, Outcome and Need (ICON) which is an orthodontic index developed and introduced in 2000 should be studied in different ethnic groups. Purpose The aim of this study was to perform an analysis on the ICON and to verify whether this index is valid for assessing both the need and complexity of orthodontic treatment in Iran. Materials and Method Five orthodontists were asked to score pre-treatment diagnostic records of 100 patients with a uniform distribution of different types of malocclusions determined by Dental Health Component of the Index of Treatment Need. A calibrated examiner also assessed the need for orthodontic treatment and complexity of the cases based on the ICON index as well as the Index of Orthodontic Treatment Need (IOTN). 10 days later, 25% of the cases were re-scored by the panel of experts and the calibrated orthodontist. Results The weighted kappa revealed the inter-examiner reliability of the experts to be 0.63 and 0.51 for the need and complexity components, respectively. ROC curve was used to assess the validity of the index. A new cut-off point was adjusted at 35 in lieu of 43 as the suggested cut-off point. This cut-off point showed the highest level of sensitivity and specificity in our society for orthodontic treatment need (0.77 and 0.78, respectively), but it failed to define definite ranges for the complexity of treatment. Conclusion ICON is a valid index in assessing the need for treatment in Iran when the cut-off point is adjusted to 35. As for complexity of treatment, the index is not validated for our society. It seems that ICON is a well-suited substitute for the IOTN index. PMID:26331142

Semantic Indexing of Medical Learning Objects: Medical Students' Usage of a Semantic Network.

PubMed

Tix, Nadine; Gießler, Paul; Ohnesorge-Radtke, Ursula; Spreckelsen, Cord

2015-11-11

The Semantically Annotated Media (SAM) project aims to provide a flexible platform for searching, browsing, and indexing medical learning objects (MLOs) based on a semantic network derived from established classification systems. Primarily, SAM supports the Aachen emedia skills lab, but SAM is ready for indexing distributed content and the Simple Knowledge Organizing System standard provides a means for easily upgrading or even exchanging SAM's semantic network. There is a lack of research addressing the usability of MLO indexes or search portals like SAM and the user behavior with such platforms. The purpose of this study was to assess the usability of SAM by investigating characteristic user behavior of medical students accessing MLOs via SAM. In this study, we chose a mixed-methods approach. Lean usability testing was combined with usability inspection by having the participants complete four typical usage scenarios before filling out a questionnaire. The questionnaire was based on the IsoMetrics usability inventory. Direct user interaction with SAM (mouse clicks and pages accessed) was logged. The study analyzed the typical usage patterns and habits of students using a semantic network for accessing MLOs. Four scenarios capturing characteristics of typical tasks to be solved by using SAM yielded high ratings of usability items and showed good results concerning the consistency of indexing by different users. Long-tail phenomena emerge as they are typical for a collaborative Web 2.0 platform. Suitable but nonetheless rarely used keywords were assigned to MLOs by some users. It is possible to develop a Web-based tool with high usability and acceptance for indexing and retrieval of MLOs. SAM can be applied to indexing multicentered repositories of MLOs collaboratively.

Comparison of Methods for Predicting the Compositional Dependence of the Density and Refractive Index of Organic-Aqueous Aerosols.

PubMed

Cai, Chen; Miles, Rachael E H; Cotterell, Michael I; Marsh, Aleksandra; Rovelli, Grazia; Rickards, Andrew M J; Zhang, Yun-Hong; Reid, Jonathan P

2016-08-25

Representing the physicochemical properties of aerosol particles of complex composition is of crucial importance for understanding and predicting aerosol thermodynamic, kinetic, and optical properties and processes and for interpreting and comparing analysis methods. Here, we consider the representations of the density and refractive index of aqueous-organic aerosol with a particular focus on the dependence of these properties on relative humidity and water content, including an examination of the properties of solution aerosol droplets existing at supersaturated solute concentrations. Using bulk phase measurements of density and refractive index for typical organic aerosol components, we provide robust approaches for the estimation of these properties for aerosol at any intermediate composition between pure water and pure solute. Approximately 70 compounds are considered, including mono-, di- and tricarboxylic acids, alcohols, diols, nitriles, sulfoxides, amides, ethers, sugars, amino acids, aminium sulfates, and polyols. We conclude that the molar refraction mixing rule should be used to predict the refractive index of the solution using a density treatment that assumes ideal mixing or, preferably, a polynomial dependence on the square root of the mass fraction of solute, depending on the solubility limit of the organic component. Although the uncertainties in the density and refractive index predictions depend on the range of subsaturated compositional data available for each compound, typical errors for estimating the solution density and refractive index are less than ±0.1% and ±0.05%, respectively. Owing to the direct connection between molar refraction and the molecular polarizability, along with the availability of group contribution models for predicting molecular polarizability for organic species, our rigorous testing of the molar refraction mixing rule provides a route to predicting refractive indices for aqueous solutions containing organic molecules

Neurocognitive functioning predicts frailty index in HIV.

PubMed

Oppenheim, Hannah; Paolillo, Emily W; Moore, Raeanne C; Ellis, Ronald J; Letendre, Scott L; Jeste, Dilip V; Grant, Igor; Moore, David J

2018-06-06

To evaluate the association between a frailty index (i.e., scale of accumulated deficits) and neurocognitive functioning among persons living with HIV/AIDS (PLWHA). Observational, cross-sectional data were gathered from the University of California, San Diego, HIV Neurobehavioral Research Program from 2002 to 2016. Eight hundred eleven PLWHA aged 18 to 79 years completed comprehensive physical, neuropsychological, and neuromedical evaluations. The frailty index was composed of 26 general and HIV-specific health maintenance measures, and reflects the proportion of accumulated deficits from 0 (no deficits) to 1 (all 26 deficits). Multiple linear regression was used to examine the association between continuous frailty index scores and neurocognitive functioning. Participants had a mean age of 44.6 years (11.2), and were mostly male (86.9%) and white (60.2%) with a mean frailty index of 0.26 (0.11). Over the study period, prevalence of HIV-related components (e.g., low CD4) decreased, while non-HIV comorbidities (e.g., diabetes) increased. There were no changes in the frailty index by study year. Higher frailty index was associated with worse global neurocognitive functioning, even after adjusting for covariates (age, employment, and premorbid intellectual functioning; b = -0.007; 95% confidence interval [CI] = -0.0112 to -0.003; p < 0.001). The cognitive domains of verbal fluency (b = -0.004; 95% CI = -0.006 to -0.002), executive functioning (b = -0.004; 95% CI = -0.006 to -0.002), processing speed (b = -0.005; 95% CI = -0.007 to -0.003), and motor skills (b = -0.006; 95% CI = -0.007 to -0.005) also significantly predicted worse frailty index score ( p values <0.001). A frailty index can standardize how clinicians identify PLWHA who may be at higher risk of neurocognitive impairment. © 2018 American Academy of Neurology.

Re-analysis of Alaskan benchmark glacier mass-balance data using the index method

USGS Publications Warehouse

Van Beusekom, Ashely E.; O'Nell, Shad R.; March, Rod S.; Sass, Louis C.; Cox, Leif H.

2010-01-01

At Gulkana and Wolverine Glaciers, designated the Alaskan benchmark glaciers, we re-analyzed and re-computed the mass balance time series from 1966 to 2009 to accomplish our goal of making more robust time series. Each glacier's data record was analyzed with the same methods. For surface processes, we estimated missing information with an improved degree-day model. Degree-day models predict ablation from the sum of daily mean temperatures and an empirical degree-day factor. We modernized the traditional degree-day model and derived new degree-day factors in an effort to match the balance time series more closely. We estimated missing yearly-site data with a new balance gradient method. These efforts showed that an additional step needed to be taken at Wolverine Glacier to adjust for non-representative index sites. As with the previously calculated mass balances, the re-analyzed balances showed a continuing trend of mass loss. We noted that the time series, and thus our estimate of the cumulative mass loss over the period of record, was very sensitive to the data input, and suggest the need to add data-collection sites and modernize our weather stations.

Measurement of the Microwave Refractive Index of Materials Based on Parallel Plate Waveguides

NASA Astrophysics Data System (ADS)

Zhao, F.; Pei, J.; Kan, J. S.; Zhao, Q.

2017-12-01

An electrical field scanning apparatus based on a parallel plate waveguide method is constructed, which collects the amplitude and phase matrices as a function of the relative position. On the basis of such data, a method for calculating the refractive index of the measured wedge samples is proposed in this paper. The measurement and calculation results of different PTFE samples reveal that the refractive index measured by the apparatus is substantially consistent with the refractive index inferred with the permittivity of the sample. The proposed refractive index calculation method proposed in this paper is a competitive method for the characterization of the refractive index of materials with positive refractive index. Since the apparatus and method can be used to measure and calculate arbitrary direction of the microwave propagation, it is believed that both of them can be applied to the negative refractive index materials, such as metamaterials or “left-handed” materials.

Completed Research in Health, Physical Education, and Recreation, Including International Sources.

ERIC Educational Resources Information Center

Singer, Robert W., Ed.; Weiss, Raymond A., Ed.

This compilation lists research completed in the areas of health, physical education, recreation, and allied areas during 1969. It is arranged in three parts. Part 1 is a subject heading index in which cross references are given for all the listings in parts 2 and 3. Part 2 is a bibliography of published research, citing 801 articles published in…

A data fusion-based drought index

NASA Astrophysics Data System (ADS)

Azmi, Mohammad; Rüdiger, Christoph; Walker, Jeffrey P.

2016-03-01

Drought and water stress monitoring plays an important role in the management of water resources, especially during periods of extreme climate conditions. Here, a data fusion-based drought index (DFDI) has been developed and analyzed for three different locations of varying land use and climate regimes in Australia. The proposed index comprehensively considers all types of drought through a selection of indices and proxies associated with each drought type. In deriving the proposed index, weekly data from three different data sources (OzFlux Network, Asia-Pacific Water Monitor, and MODIS-Terra satellite) were employed to first derive commonly used individual standardized drought indices (SDIs), which were then grouped using an advanced clustering method. Next, three different multivariate methods (principal component analysis, factor analysis, and independent component analysis) were utilized to aggregate the SDIs located within each group. For the two clusters in which the grouped SDIs best reflected the water availability and vegetation conditions, the variables were aggregated based on an averaging between the standardized first principal components of the different multivariate methods. Then, considering those two aggregated indices as well as the classifications of months (dry/wet months and active/non-active months), the proposed DFDI was developed. Finally, the symbolic regression method was used to derive mathematical equations for the proposed DFDI. The results presented here show that the proposed index has revealed new aspects in water stress monitoring which previous indices were not able to, by simultaneously considering both hydrometeorological and ecological concepts to define the real water stress of the study areas.

Refractive Index of Sodium Iodide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jellison Jr, Gerald Earle; Boatner, Lynn A; Ramey, Joanne Oxendine

2012-01-01

The refractive index of sodium iodide, an important scintillator material that is widely used for radiation detection, is based on a single measurement made by Spangenberg at one wavelength using the index-matching liquid immersion method (Z. Kristallogr., 57, 494-534 (1923)). In the present paper, we present new results for the refractive index of sodium iodide as measured by the minimum deviation technique at six wavelengths between 436 nm (n=1.839 0.002) and 633 nm (n=1.786 0.002). These 6 measurements can be fit to a Sellmeier model, resulting in a 2 of 1.02, indicating a good fit to the data. In addition,more » we report on ellipsometry measurements, which suggest that the near-surface region of the air sensitive NaI crystal seriously degrades, even in a moisture-free environment, resulting in a significantly lower value of the refractive index near the surface. First-principles theoretical calculations of the NaI refractive index that agree with the measured values within 0.025-0.045 are also presented and discussed.« less

Resistance Distances and Kirchhoff Index in Generalised Join Graphs

NASA Astrophysics Data System (ADS)

Chen, Haiyan

2017-03-01

The resistance distance between any two vertices of a connected graph is defined as the effective resistance between them in the electrical network constructed from the graph by replacing each edge with a unit resistor. The Kirchhoff index of a graph is defined as the sum of all the resistance distances between any pair of vertices of the graph. Let G=H[G1, G2, …, Gk ] be the generalised join graph of G1, G2, …, Gk determined by H. In this paper, we first give formulae for resistance distances and Kirchhoff index of G in terms of parameters of {G'_i}s and H. Then, we show that computing resistance distances and Kirchhoff index of G can be decomposed into simpler ones. Finally, we obtain explicit formulae for resistance distances and Kirchhoff index of G when {G'_i}s and H take some special graphs, such as the complete graph, the path, and the cycle.

Assessment of groundwater vulnerability in the coastal region of Oman using DRASTIC index method in GIS environment.

PubMed

Jamrah, Ahmad; Al-Futaisi, Ahmed; Rajmohan, Natarajan; Al-Yaroubi, Saif

2008-12-01

A study was carried out to develop a vulnerability map for Barka region in the North Batina of Oman using DRASTIC vulnerability index method in GIS environment. DRASTIC layers were created using data from published reports and the seven DRASTIC layers were processed by the ArcGIS geographic information system. Finally, DRASTIC maps were created for 1995 and 2004 to understand the long-term changes in the vulnerability index. DRASTIC vulnerability maps were evaluated using groundwater quality data such as chemical and biological parameters. DRASTIC vulnerability maps of 1995 and 2004 indicate that the northern part of Barka is more vulnerable to pollution than southern part and the central part of Barka also shows high relative vulnerability which is mostly related to the high conductivity values. Moreover, the changes in water level due to high abstraction rate of groundwater reflect in the vulnerability maps and low vulnerability area is increased in the southern part during 2004 compared to 1995. Moreover, regional distribution maps of nitrate, chloride and total and fecal coliforms are well correlated with DRASTIC vulnerability maps. In contrast to this, even though DRASTIC method predicted the central part of the study region is highly vulnerable, both chemical and biological parameters show lower concentrations in this region compared to coastal belt, which is mainly due to agricultural and urban development. In Barka, urban development and agricultural activities are very high in coastal region compared to southern and central part of the study area. Hence, this study concluded that DRASTIC method is also applicable in coastal region having ubiquitous contamination sources.

Adapting the Elder Abuse Suspicion Index© for Use in Long-Term Care: A Mixed-Methods Approach.

PubMed

Ballard, Stephanie A; Yaffe, Mark J; August, Linda; Cetin-Sahin, Deniz; Wilchesky, Machelle

2017-09-01

Currently available elder abuse screening and identification tools have limitations for use in long-term care (LTC). This mixed-methods study sought to explore the appropriateness of using the Elder Abuse Suspicion Index© (a suspicion tool originally created for use with older adults in the ambulatory setting with Mini-Mental State Examination scores ≥ 24) with similarly cognitively functioning persons residing in LTC. Results were informed by a literature review, Internet-based consultations with elder abuse experts across Canada ( n = 19), and data obtained from two purposively selected focus groups ( n = 7 local elder abuse experts; n = 7 experienced front-line LTC clinicians). Analyses resulted in the development of a nine-question tool, the EASI-ltc, designed to raise suspicion of EA in cognitively intact older adults residing in LTC (with little or no cognitive impairment). Notable modifications to the original Elder Abuse Suspicion Index © (EASI) included three new questions to further address neglect and psychological abuse, and a context-specific preamble to orient responders.

Food cravings mediate the relationship between chronic stress and body mass index.

PubMed

Chao, Ariana; Grilo, Carlos M; White, Marney A; Sinha, Rajita

2015-06-01

This study examined the relationships between chronic stress, food cravings, and body mass index. A community-based sample of adults (N = 619) completed a comprehensive assessment battery and heights and weights were measured. Chronic stress had a significant direct effect on food cravings, and food cravings had a significant direct effect on body mass index. The total effect of chronic stress on body mass index was significant. Food cravings partially mediated the relationship between chronic stress and body mass index. These findings are consistent with research that chronic stress may potentiate motivation for rewarding substances and behaviors and indicate that high food cravings may contribute to stress-related weight gain. © The Author(s) 2015.

Association between fat mass index and fat-free mass index values and cardiovascular risk in adolescents

PubMed Central

de Oliveira, Patrícia Morais; da Silva, Fabiana Almeida; Oliveira, Renata Maria Souza; Mendes, Larissa Loures; Pereira, Michele; Cândido, Ana Paula Carlos

2016-01-01

Abstract Objective: To describe the association between fat mass index and fat-free mass index values and factors associated with cardiovascular risk in adolescents in the city of Juiz de Fora, Minas Gerais. Methods: Cross-sectional study was with 403 adolescents aged 10–14 years, from public and private schools. Anthropometric, clinical, and biochemical measurements were obtained, as well as self-reported time spent performing physical exercises, sedentary activities and sexual maturation stage. Results: Regarding the nutritional status, 66.5% of the adolescents had normal weight, 19.9% were overweight and 10.2% were obese. For both genders, the fat mass index was higher in adolescents who had high serum triglycerides, body mass index and waist circumference. Conclusions: Adolescents who had anthropometric, clinical and biochemical characteristics considered to be at risk for the development of cardiovascular disease had higher values of fat mass index. Different methodologies for the assessment of body composition make health promotion and disease prevention more effective. PMID:26542380

The Augmented Lagrange Multipliers Method for Matrix Completion from Corrupted Samplings with Application to Mixed Gaussian-Impulse Noise Removal

PubMed Central

Meng, Fan; Yang, Xiaomei; Zhou, Chenghu

2014-01-01

This paper studies the problem of the restoration of images corrupted by mixed Gaussian-impulse noise. In recent years, low-rank matrix reconstruction has become a research hotspot in many scientific and engineering domains such as machine learning, image processing, computer vision and bioinformatics, which mainly involves the problem of matrix completion and robust principal component analysis, namely recovering a low-rank matrix from an incomplete but accurate sampling subset of its entries and from an observed data matrix with an unknown fraction of its entries being arbitrarily corrupted, respectively. Inspired by these ideas, we consider the problem of recovering a low-rank matrix from an incomplete sampling subset of its entries with an unknown fraction of the samplings contaminated by arbitrary errors, which is defined as the problem of matrix completion from corrupted samplings and modeled as a convex optimization problem that minimizes a combination of the nuclear norm and the -norm in this paper. Meanwhile, we put forward a novel and effective algorithm called augmented Lagrange multipliers to exactly solve the problem. For mixed Gaussian-impulse noise removal, we regard it as the problem of matrix completion from corrupted samplings, and restore the noisy image following an impulse-detecting procedure. Compared with some existing methods for mixed noise removal, the recovery quality performance of our method is dominant if images possess low-rank features such as geometrically regular textures and similar structured contents; especially when the density of impulse noise is relatively high and the variance of Gaussian noise is small, our method can outperform the traditional methods significantly not only in the simultaneous removal of Gaussian noise and impulse noise, and the restoration ability for a low-rank image matrix, but also in the preservation of textures and details in the image. PMID:25248103

Comparison of simple additive weighting (SAW) and composite performance index (CPI) methods in employee remuneration determination

NASA Astrophysics Data System (ADS)

Karlitasari, L.; Suhartini, D.; Benny

2017-01-01

The process of determining the employee remuneration for PT Sepatu Mas Idaman currently are still using Microsoft Excel-based spreadsheet where in the spreadsheet there is the value of criterias that must be calculated for every employee. This can give the effect of doubt during the assesment process, therefore resulting in the process to take much longer time. The process of employee remuneration determination is conducted by the assesment team based on some criterias that have been predetermined. The criteria used in the assessment process are namely the ability to work, human relations, job responsibility, discipline, creativity, work, achievement of targets, and absence. To ease the determination of employee remuneration to be more efficient and effective, the Simple Additive Weighting (SAW) method is used. SAW method can help in decision making for a certain case, and the calculation that generates the greatest value will be chosen as the best alternative. Other than SAW, also by using another method was the CPI method which is one of the calculating method in decision making based on performance index. Where SAW method was more faster by 89-93% compared to CPI method. Therefore it is expected that this application can be an evaluation material for the need of training and development for employee performances to be more optimal.

Accuracy of Digitally Fabricated Wax Denture Bases and Conventional Completed Complete Dentures.

PubMed

Stawarczyk, Bogna; Lümkemann, Nina; Eichberger, Marlis; Wimmer, Timea

2017-12-19

The purpose of this investigation was to analyze the accuracy of digitally fabricated wax trial dentures and conventionally finalized complete dentures in comparison to a surface tessellation language (STL)-dataset. A generated data set for the denture bases and the tooth sockets was used, converted into STL-format, and saved as reference. Five mandibular and 5 maxillary denture bases were milled from wax blanks and denture teeth were waxed into their tooth sockets. Each complete denture was checked on fit, waxed onto the dental cast, and digitized using an optical laboratory scanning device. The complete dentures were completed conventionally using the injection method, finished, and scanned. The resulting STL-datasets were exported into the three-dimensional (3D) software GOM Inspect. Each of the 5 mandibular and 5 maxillary complete dentures was aligned with the STL- and the wax trial denture dataset. Alignment was performed based on a best-fit algorithm. A three-dimensional analysis of the spatial divergences in x -, y - and z -axes was performed by the 3D software and visualized in a color-coded illustration. The mean positive and negative deviations between the datasets were calculated automatically. In a direct comparison between maxillary wax trial dentures and complete dentures, complete dentures showed higher deviations from the STL-dataset than the wax trial dentures. The deviations occurred in the area of the teeth as well as in the distal area of the denture bases. In contrast, the highest deviations in both the mandibular wax trial dentures and the mandibular complete dentures were observed in the distal area. The complete dentures showed higher deviations on the occlusal surfaces of the teeth compared to the wax dentures. Computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated wax dentures exhibited fewer deviations from the STL-reference than the complete dentures. The deviations were significantly greater in the vicinity of the

Using Rasch Measurement To Evaluate the Organizational Climate Index.

ERIC Educational Resources Information Center

Borkan, Bengu; Capa, Yesim; Figueiredo, Claudia; Loadman, William E.

School climate has been acknowledged as a construct with impact on important aspects of educational outcomes, such as student achievement, school effectiveness, and school completion. The Organizational Climate Index was an instrument developed to measure school climate (W.Hoy, 2001). This study evaluated this instrument by using Rasch…

Indirect determination of leaf area index to calculate evapotranspiration

USDA-ARS?s Scientific Manuscript database

The plant integrates soil and environmental factors. The purpose of this study was to use nadir photos from 4.9 m height to determine ground cover, leaf area index (LAI), and plant water use (along with micrometeorology measurements). Measurements were completed on plots comparing a four-year organi...

Isometric deformations of planar quadrilaterals with constant index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zaputryaeva, E S

We consider isometric deformations (motions) of polygons (so-called carpenter's rule problem) in the case of self-intersecting polygons with the additional condition that the index of the polygon is preserved by the motion. We provide general information about isometric deformations of planar polygons and give a complete solution of the carpenter's problem for quadrilaterals. Bibliography: 17 titles.

Jones index, secret sharing and total quantum dimension

NASA Astrophysics Data System (ADS)

Fiedler, Leander; Naaijkens, Pieter; Osborne, Tobias J.

2017-02-01

We study the total quantum dimension in the thermodynamic limit of topologically ordered systems. In particular, using the anyons (or superselection sectors) of such models, we define a secret sharing scheme, storing information invisible to a malicious party, and argue that the total quantum dimension quantifies how well we can perform this task. We then argue that this can be made mathematically rigorous using the index theory of subfactors, originally due to Jones and later extended by Kosaki and Longo. This theory provides us with a ‘relative entropy’ of two von Neumann algebras and a quantum channel, and we argue how these can be used to quantify how much classical information two parties can hide form an adversary. We also review the total quantum dimension in finite systems, in particular how it relates to topological entanglement entropy. It is known that the latter also has an interpretation in terms of secret sharing schemes, although this is shown by completely different methods from ours. Our work provides a different and independent take on this, which at the same time is completely mathematically rigorous. This complementary point of view might be beneficial, for example, when studying the stability of the total quantum dimension when the system is perturbed.

The Traffic Noise Index: A Method of Controlling Noise Nuisance.

ERIC Educational Resources Information Center

Langdon, F. J.; Scholes, W. E.

This building research survey is an analysis of the social nuisance caused by urban motor ways and their noise. The Traffic Noise Index is used to indicate traffic noises and their effects on architectural designs and planning, while suggesting the need for more and better window insulation and acoustical barriers. Overall concern is for--(1)…

Effect of change in core width and core refractive index on the switching behavior of a nonlinear Mach-Zehnder interferometer

NASA Astrophysics Data System (ADS)

Srivastava, Arpita; Medhekar, Sarang

2012-09-01

The effect of variation of core width and core refractive index on output versus input (O-I) and transmission coefficient versus input (T-I) characteristics of a nonlinear Mach-Zehnder interferometer (NMZI) were investigated for the first time. Beam propagation method has been used for the present investigation. Change of core width and/or core refractive index adds extra liberty for changing the operating power of an NMZI to a desired value. Moreover, it is revealed for the first time that use of only the O-I or T-I characteristic presents an incomplete picture of NMZI switching; both O-I and T-I characteristics of both balanced/imbalanced NMZIs are indispensible for complete understanding of NMZI switching.

G-index: A new metric to describe dynamic refractive index effects in HPLC absorbance detection.

PubMed

Kraiczek, Karsten G; Rozing, Gerard P; Zengerle, Roland

2018-09-01

High performance liquid chromatography (HPLC) with a solvent gradient and absorbance detection is one of the most widely used methods in analytical chemistry. The observed absorbance baseline is affected by the changes in the refractive index (RI) of the mobile phase. Near the limited of detection, this complicates peak quantitation. The general aspects of these RI-induced apparent absorbance effects are discussed. Two different detectors with fundamentally different optics and flow cell concepts, a variable-wavelength detector equipped with a conventional flow cell and a diode-array detector equipped with a liquid core waveguide flow cell, are compared with respect to their RI behavior. A simple method to separate static - partly unavoidable - RI effects from dynamic RI effects is presented. It is shown that the dynamic RI behavior of an absorbance detector can be well described using a single, relatively easy-to-determine metric called the G-index. The G-index is typically in the order of a few seconds and its sign depends on the optical flow cell concept. Copyright © 2018 Elsevier B.V. All rights reserved.

Nonadiabatic Ab Initio Molecular Dynamics with the Floating Occupation Molecular Orbital-Complete Active Space Configuration Interaction Method [Non-Adiabatic Ab Initio Molecular Dynamics with Floating Occupation Molecular Orbitals CASCI Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollas, Daniel; Sistik, Lukas; Hohenstein, Edward G.

Here, we show that the floating occupation molecular orbital complete active space configuration interaction (FOMO-CASCI) method is a promising alternative to the widely used complete active space self-consistent field (CASSCF) method in direct nonadiabatic dynamics simulations. We have simulated photodynamics of three archetypal molecules in photodynamics: ethylene, methaniminium cation, and malonaldehyde. We compared the time evolution of electronic populations and reaction mechanisms as revealed by the FOMO-CASCI and CASSCF approaches. Generally, the two approaches provide similar results. Some dynamical differences are observed, but these can be traced back to energetically minor differences in the potential energy surfaces. We suggest thatmore » the FOMO-CASCI method represents, due to its efficiency and stability, a promising approach for direct ab initio dynamics in the excited state.« less

Estimation of design floods in ungauged catchments using a regional index flood method. A case study of Lake Victoria Basin in Kenya

NASA Astrophysics Data System (ADS)

Nobert, Joel; Mugo, Margaret; Gadain, Hussein

Reliable estimation of flood magnitudes corresponding to required return periods, vital for structural design purposes, is impacted by lack of hydrological data in the study area of Lake Victoria Basin in Kenya. Use of regional information, derived from data at gauged sites and regionalized for use at any location within a homogenous region, would improve the reliability of the design flood estimation. Therefore, the regional index flood method has been applied. Based on data from 14 gauged sites, a delineation of the basin into two homogenous regions was achieved using elevation variation (90-m DEM), spatial annual rainfall pattern and Principal Component Analysis of seasonal rainfall patterns (from 94 rainfall stations). At site annual maximum series were modelled using the Log normal (LN) (3P), Log Logistic Distribution (LLG), Generalized Extreme Value (GEV) and Log Pearson Type 3 (LP3) distributions. The parameters of the distributions were estimated using the method of probability weighted moments. Goodness of fit tests were applied and the GEV was identified as the most appropriate model for each site. Based on the GEV model, flood quantiles were estimated and regional frequency curves derived from the averaged at site growth curves. Using the least squares regression method, relationships were developed between the index flood, which is defined as the Mean Annual Flood (MAF) and catchment characteristics. The relationships indicated area, mean annual rainfall and altitude were the three significant variables that greatly influence the index flood. Thereafter, estimates of flood magnitudes in ungauged catchments within a homogenous region were estimated from the derived equations for index flood and quantiles from the regional curves. These estimates will improve flood risk estimation and to support water management and engineering decisions and actions.

Direct memory access transfer completion notification

DOEpatents

Archer, Charles J. , Blocksome; Michael A. , Parker; Jeffrey, J [Rochester, MN

2011-02-15

Methods, systems, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA on an origin node in an origin injection FIFO, a data descriptor for an application message; inserting, by the origin DMA, a reflection descriptor in the origin injection FIFO, the reflection descriptor specifying a remote get operation for injecting a completion notification descriptor in a reflection injection FIFO on a reflection node; transferring, by the origin DMA to a target node, the message in dependence upon the data descriptor; in response to completing the message transfer, transferring, by the origin DMA to the reflection node, the completion notification descriptor in dependence upon the reflection descriptor; receiving, by the origin DMA from the reflection node, a completion packet; and notifying, by the origin DMA in response to receiving the completion packet, the origin node's processing core that the message transfer is complete.

Index Fund Selections with GAs and Classifications Based on Turnover

NASA Astrophysics Data System (ADS)

Orito, Yukiko; Motoyama, Takaaki; Yamazaki, Genji

It is well known that index fund selections are important for the risk hedge of investment in a stock market. The`selection’means that for`stock index futures’, n companies of all ones in the market are selected. For index fund selections, Orito et al.(6) proposed a method consisting of the following two steps : Step 1 is to select N companies in the market with a heuristic rule based on the coefficient of determination between the return rate of each company in the market and the increasing rate of the stock price index. Step 2 is to construct a group of n companies by applying genetic algorithms to the set of N companies. We note that the rule of Step 1 is not unique. The accuracy of the results using their method depends on the length of time data (price data) in the experiments. The main purpose of this paper is to introduce a more`effective rule’for Step 1. The rule is based on turnover. The method consisting of Step 1 based on turnover and Step 2 is examined with numerical experiments for the 1st Section of Tokyo Stock Exchange. The results show that with our method, it is possible to construct the more effective index fund than the results of Orito et al.(6). The accuracy of the results using our method depends little on the length of time data (turnover data). The method especially works well when the increasing rate of the stock price index over a period can be viewed as a linear time series data.

Indexing method of digital audiovisual medical resources with semantic Web integration.

PubMed

Cuggia, Marc; Mougin, Fleur; Le Beux, Pierre

2003-01-01

Digitalization of audio-visual resources combined with the performances of the networks offer many possibilities which are the subject of intensive work in the scientific and industrial sectors. Indexing such resources is a major challenge. Recently, the Motion Pictures Expert Group (MPEG) has been developing MPEG-7, a standard for describing multimedia content. The good of this standard is to develop a rich set of standardized tools to enable fast efficient retrieval from digital archives or filtering audiovisual broadcasts on the internet. How this kind of technologies could be used in the medical context? In this paper, we propose a simpler indexing system, based on Dublin Core standard and complaint to MPEG-7. We use MeSH and UMLS to introduce conceptual navigation. We also present a video-platform with enables to encode and give access to audio-visual resources in streaming mode.

Indexing method of digital audiovisual medical resources with semantic Web integration.

PubMed

Cuggia, Marc; Mougin, Fleur; Le Beux, Pierre

2005-03-01

Digitalization of audiovisual resources and network capability offer many possibilities which are the subject of intensive work in scientific and industrial sectors. Indexing such resources is a major challenge. Recently, the Motion Pictures Expert Group (MPEG) has developed MPEG-7, a standard for describing multimedia content. The goal of this standard is to develop a rich set of standardized tools to enable efficient retrieval from digital archives or the filtering of audiovisual broadcasts on the Internet. How could this kind of technology be used in the medical context? In this paper, we propose a simpler indexing system, based on the Dublin Core standard and compliant to MPEG-7. We use MeSH and the UMLS to introduce conceptual navigation. We also present a video-platform which enables encoding and gives access to audiovisual resources in streaming mode.

Full extraction methods to retrieve effective refractive index and parameters of a bianisotropic metamaterial based on material dispersion models

NASA Astrophysics Data System (ADS)

Hsieh, Feng-Ju; Wang, Wei-Chih

2012-09-01

This paper discusses two improved methods in retrieving effective refractive indices, impedances, and material properties, such as permittivity (ɛ) and permeability (μ), of metamaterials. The first method modified from Kong's retrieval method allows effective constitutive parameters over all frequencies including the anti-resonant band, where imaginary parts of ɛ or μ are negative, to be solved. The second method is based on genetic algorithms and optimization of properly defined goal functions to retrieve parameters of the Drude and Lorentz dispersion models. Equations of effective refractive index and impedance at any reference planes are derived. Split ring resonator-rod based metamaterials operating in terahertz frequencies are designed and investigated with proposed methods. Retrieved material properties and parameters are used to regenerate S-parameters and compared with simulation results generated by cst microwave studio software.

Sleep Quality and Body Mass Index in College Students: The Role of Sleep Disturbances

PubMed Central

Vargas, Perla A.; Flores, Melissa; Robles, Elias

2014-01-01

Objective Obesity and its comorbidities have emerged as a leading public health concern. Our aim was to explore the relationship between BMI and sleep patterns, including duration and disturbances. Methods A convenience sample of 515 college students completed an online survey consisting of the Pittsburgh Sleep Quality Index (PSQI), and self-reported height and weight to calculate Body Mass Index (BMI). Univariate and multivariate logistic regression analyses were performed using components of the PSQI as predictors of overweight (BMI ≥ 25). Results One-third of the participants had BMI ≥ 25, and 51% were poor-quality sleepers (PSQI > 5). Controlling for age and sex, only sleep disturbances were associated to overweight (OR=1.66, 95% CI: 1.08-2.57). Conclusions Sleep disturbances, rather than sleep duration predicted overweight among young adults; this is consistent with the most recent evidence in the literature. These findings support expanding the scope of wellness programs to promote healthy sleep among students. PMID:24933244

Citation analysis of faculty publication: beyond Science Citation Index and Social Science Citation Index.

PubMed

Reed, K L

1995-10-01

When evaluated for promotion or tenure, faculty members are increasingly judged more on the quality than on the quantity of their scholarly publications. As a result, they want help from librarians in locating all citations to their published works for documentation in their curriculum vitae. Citation analysis using Science Citation Index and Social Science Citation Index provides a logical starting point in measuring quality, but the limitations of these sources leave a void in coverage of citations to an author's work. This article discusses alternative and additional methods of locating citations to published works.

Search and Retrieval Index to EOS/ESD Symposium Proceedings - 1979 to 1984.

DTIC Science & Technology

1985-04-15

This book contains indexes used in searching for information contained in papers produced in Electrical Overstress/Electrostatic Discharge (EOS/ESD) Symposium 1979 to 1984. These indexes are the Alphabetical List of Index Terms, Subject Index, Author Index , Corporate Index, Keywords in Title Index, and Chronological List of Papers Index. These indexes provide a clear, easy-to-read, and concise method of searching for and

An Inexpensive Family Index of Risk for Mood Issues Improves Identification of Pediatric Bipolar Disorder

PubMed Central

Algorta, Guillermo Perez; Youngstrom, Eric A.; Phelps, James; Jenkins, Melissa M.; Kogos, Jennifer L.; Findling, Robert L.

2013-01-01

Family history of mental illness provides important information when evaluating pediatric bipolar disorder (PBD). However, such information is often challenging to gather within clinical settings. This study investigates the feasibility and utility of gathering family history information using an inexpensive method practical for outpatient settings. Families (N=273) completed family history, rating scales, MINI and KSADS interviews about youths 5–18 (median=11) years presenting to an outpatient clinic. Primary caregivers completed a half page Family Index of Risk for Mood issues (FIRM). All families completed the FIRM quickly and easily. Most (78%) reported 1+ relatives having history of mood or substance issues, M=3.7 (SD=3.3). A simple sum of familial mood issues discriminated cases with PBD from all other cases, AUROC=.63, p=.006. FIRM scores were specific to youth mood disorder and not ADHD or disruptive behavior disorder. FIRM scores significantly improved the detection of PBD even controlling for rating scales. No subset of family risk items performed better than the total. Family history information showed clinically meaningful discrimination of PBD. Two different approaches to clinical interpretation showed validity in these clinically realistic data. Inexpensive and clinically practical methods of gathering family history can help to improve the detection of PBD. PMID:22800090

Flipped clinical training: a structured training method for undergraduates in complete denture prosthesis.

PubMed

K, Anbarasi; K, Kasim Mohamed; Vijayaraghavan, Phagalvarthy; Kandaswamy, Deivanayagam

2016-12-01

To design and implement flipped clinical training for undergraduate dental students in removable complete denture treatment and predict its effectiveness by comparing the assessment results of students trained by flipped and traditional methods. Flipped training was designed by shifting the learning from clinics to learning center (phase I) and by preserving the practice in clinics (phase II). In phase I, student-faculty interactive session was arranged to recap prior knowledge. This is followed by a display of audio synchronized video demonstration of the procedure in a repeatable way and subsequent display of possible errors that may occur in treatment with guidelines to overcome such errors. In phase II, live demonstration of the procedure was given. Students were asked to treat three patients under instructor's supervision. The summative assessment was conducted by applying the same checklist criterion and rubric scoring used for the traditional method. Assessment results of three batches of students trained by flipped method (study group) and three traditionally trained previous batches (control group) were taken for comparison by chi-square test. The sum of traditionally trained three batch students who prepared acceptable dentures (score: 2 and 3) and unacceptable dentures (score: 1) was compared with the same of flipped trained three batch students revealed that the number of students who demonstrated competency by preparing acceptable dentures was higher for flipped training (χ 2 =30.996 with p<0.001). The results reveal the supremacy of flipped training in enhancing students competency and hence recommended for training various clinical procedures.

Non-invasive method and apparatus for monitoring intracranial pressure and pressure volume index in humans

NASA Technical Reports Server (NTRS)

Cantrell, John H. (Inventor); Yost, William T. (Inventor)

1994-01-01

Non-invasive measuring devices responsive to changes in a patient's intracranial pressure (ICP) can be accurately calibrated for monitoring purposes by providing known changes in ICP by non-invasive methods, such as placing the patient on a tilting bed and calculating a change in ICP from the tilt angle and the length of the patient's cerebrospinal column, or by placing a pressurized skull cap on the patient and measuring the inflation pressure. Absolute values for the patient's pressure-volume index (PVI) and the steady state ICP can then be determined by inducing two known changes in the volume of cerebrospinal fluid while recording the corresponding changes in ICP by means of the calibrated measuring device. The two pairs of data for pressure change and volume change are entered into an equation developed from an equation describing the relationship between ICP and cerebrospinal fluid volume. PVI and steady state ICP are then determined by solving the equation. Methods for inducing known changes in cerebrospinal fluid volume are described.

Non-invasive method and apparatus for monitoring intracranial pressure and pressure volume index in humans

NASA Technical Reports Server (NTRS)

Yost, William T. (Inventor); Cantrell, Jr., John H. (Inventor)

1997-01-01

Non-invasive measuring devices responsive to changes in a patient's intracranial pressure (ICP) can be accurately calibrated for monitoring purposes by providing known changes in ICP by non-invasive methods, such as placing the patient on a tilting bed and calculating a change in ICP from the tilt angle and the length of the patient's cerebrospinal column, or by placing a pressurized skull cap on the patient and measuring the inflation pressure. Absolute values for the patient's pressure-volume index (PVI) and the steady state ICP can then be determined by inducing two known changes in the volume of cerebrospinal fluid while recording the corresponding changes in ICP by means of the calibrated measuring device. The two pairs of data for pressure change and volume change are entered into an equation developed from an equation describing the relationship between ICP and cerebrospinal fluid volume. PVI and steady state ICP are then determined by solving the equation. Methods for inducing known changes in cerebrospinal fluid volume are described.

Development of car theft crime index in peninsular Malaysia

NASA Astrophysics Data System (ADS)

Zulkifli, Malina; Ismail, Noriszura; Razali, Ahmad Mahir; Kasim, Maznah Mat

2014-06-01

Vehicle theft is classified as property crime and is considered as the most frequently reported crime in Malaysia. The rising number of vehicle thefts requires proper control by relevant authorities, especially through planning and implementation of strategic and effective measures. Nevertheless, the effort to control this crime would be much easier if there is an indication or index which is more specific to vehicle theft. This study aims to build an index crime which is specific to vehicle theft. The development of vehicle theft index proposed in this study requires three main steps; the first involves identification of criteria related to vehicle theft, the second requires calculation of degrees of importance, or weighting criteria, which involves application of correlation and entropy methods, and the final involves building of vehicle theft index using method of linear combination, or weighted arithmetic average. The results show that the two methods used for determining weights of vehicle theft index are similar. Information generated from the results can be used as a primary source for local authorities to plan strategies for reduction of vehicle theft and for insurance companies to determine premium rates of automobile insurance.

New approaches for calculating Moran's index of spatial autocorrelation.

PubMed

Chen, Yanguang

2013-01-01

Spatial autocorrelation plays an important role in geographical analysis; however, there is still room for improvement of this method. The formula for Moran's index is complicated, and several basic problems remain to be solved. Therefore, I will reconstruct its mathematical framework using mathematical derivation based on linear algebra and present four simple approaches to calculating Moran's index. Moran's scatterplot will be ameliorated, and new test methods will be proposed. The relationship between the global Moran's index and Geary's coefficient will be discussed from two different vantage points: spatial population and spatial sample. The sphere of applications for both Moran's index and Geary's coefficient will be clarified and defined. One of theoretical findings is that Moran's index is a characteristic parameter of spatial weight matrices, so the selection of weight functions is very significant for autocorrelation analysis of geographical systems. A case study of 29 Chinese cities in 2000 will be employed to validate the innovatory models and methods. This work is a methodological study, which will simplify the process of autocorrelation analysis. The results of this study will lay the foundation for the scaling analysis of spatial autocorrelation.

Low-cost precision rotary index calibration

NASA Astrophysics Data System (ADS)

Ng, T. W.; Lim, T. S.

2005-08-01

The traditional method for calibrating angular indexing repeatability of rotary axes on machine tools and measuring equipment is with a precision polygon (usually 12 sided) and an autocollimator or angular interferometer. Such a setup is typically expensive. Here, we propose a far more cost-effective approach that uses just a laser, diffractive optical element, and CCD camera. We show that significantly high accuracies can be achieved for angular index calibration.

Agent-based model for the h-index - exact solution

NASA Astrophysics Data System (ADS)

Żogała-Siudem, Barbara; Siudem, Grzegorz; Cena, Anna; Gagolewski, Marek

2016-01-01

Hirsch's h-index is perhaps the most popular citation-based measure of scientific excellence. In 2013, Ionescu and Chopard proposed an agent-based model describing a process for generating publications and citations in an abstract scientific community [G. Ionescu, B. Chopard, Eur. Phys. J. B 86, 426 (2013)]. Within such a framework, one may simulate a scientist's activity, and - by extension - investigate the whole community of researchers. Even though the Ionescu and Chopard model predicts the h-index quite well, the authors provided a solution based solely on simulations. In this paper, we complete their results with exact, analytic formulas. What is more, by considering a simplified version of the Ionescu-Chopard model, we obtained a compact, easy to compute formula for the h-index. The derived approximate and exact solutions are investigated on a simulated and real-world data sets.

A Novel Pupillometric Method for Indexing Word Difficulty in Individuals with and without Aphasia

ERIC Educational Resources Information Center

Chapman, Laura R.; Hallowell, Brooke

2015-01-01

Purpose: Cognitive effort is a clinically important facet of linguistic processing that is often overlooked in the assessment and treatment of people with aphasia (PWA). Furthermore, there is a paucity of valid ways to index cognitive effort in PWA. The construct of cognitive effort has been indexed for decades via pupillometry (measurement of…

Measurement of refractive index profile of non-symmetric, complex silica preforms with high refractive index differences

NASA Astrophysics Data System (ADS)

Probostova, Jana; Slanicka, Jiri; Mrazek, Jan; Podrazky, Ondrej; Benda, Adam; Peterka, Pavel

2016-04-01

Refractive index profile measurement is a key instrument for characterization of optical properties of preforms, which are used for drawing of high-quality optical fibers. Common industrial optical preform analyzers have been designed for measurement of simple symmetric structures such as step-index or graded-index preforms with refractive index close to the silica (n=1.457 at 633 nm). However, these conditions are usually far from more complex structures used in fiber lasers or in fiber sensor area. Preforms for the drawing of advanced optical fibers, such as Bragg, microstructure or photonic crystal fibers, are usually constituted from stacks with non-symmetric internal structure or composed of alternating layers with high refractive index contrasts. In this paper we present comparison of refractive index profile measurements of simple as well as complex structures with high refractive index differences simulating the Bragg structures. Commercial Photon Kinetics 2600 preform analyzer was used for the refractive index profile measurements. A set of concentrically arranged silica tubes was welded to form a complex preforms. Free space between the tubes was filled by immersion with varying refractive indices to simulate the Bragg structure. Up to three tubes were used for the analysis and the refractive indices of immersion were changed from 1.4 to 1.5. When refractive index of immersion was independently measured the structure of preform was defined. Profiles of these "known" structures were compared to measured data processed by originally proposed algorithm. The work provides an extension of issues of refractive index profile measurements in non-symmetric complex silica structures by a commercial preform analyzer and proposes more convenient methods of numeric data processing.

Refractive-index measurement and inverse correction using optical coherence tomography.

PubMed

Stritzel, Jenny; Rahlves, Maik; Roth, Bernhard

2015-12-01

We describe a novel technique for determination of the refractive index of hard biological tissue as well as nonopaque technical samples based on optical coherence tomography (OCT). Our method relies on an inverse refractive-index correction (I-RIC), which matches a measured feature geometry distorted due to refractive-index boundaries to its real geometry. For known feature geometry, the refractive index can be determined with high precision from the best match between the distorted and corrected images. We provide experimental data for refractive-index measurements on a polymethylmethacrylate (PMMA) and on an ex vivo porcine cranial-bone, which are compared to reference measurements and previously published data. Our method is potentially capable of in vivo measurements on rigid biological tissue such as bone as, for example, is required to improve guidance in robot-aided surgical interventions and also for retrieving complex refractive-index profiles of compound materials.

Impact of Age, Sex and Indexation Method on MR Left Ventricular Reference Values in the Framingham Heart Study Offspring Cohort

PubMed Central

Yeon, Susan B.; Salton, Carol J.; Gona, Philimon; Chuang, Michael L.; Blease, Susan J.; Han, Yuchi; Tsao, Connie W.; Danias, Peter G.; Levy, Daniel; O’Donnell, Christopher J.; Manning, Warren J.

2014-01-01

Purpose To determine normative values for left ventricular (LV) volumes, mass, concentricity and ejection fraction (EF) and investigate associations between sex, age and body size with LV parameters in community dwelling adults. Materials and Methods 1794 Framingham Heart Study Offspring cohort members underwent LV short-axis oriented, contiguous multislice ciné SSFP MR of the left ventricle; from these a healthy referent group (N=852, 61±9 years, 40% men) free of clinical cardiac disease and hypertension (SBP<140, DBP<90 mmHg, never used antihypertensive medication ≥ 30 years prior to scanning) was identified. Referent participants were stratified by sex and age group (≤55, 56-65, >65 years); LV parameters were indexed to measures of body size. Results Men have greater LV volumes and mass than women both before and after indexation to height, powers of height, and body surface area (p<0.01 all), but indexation to fat-free mass yielded greater LV volume and mass in women. In both sexes, LV volumes and mass decrease with advancing age, though indexation attenuates this association. LVEF is greater in women than men (68±5% vs. 66±5%, p<0.01) and increases with age in both sexes (p<0.05). Conclusion Among non-hypertensive adults free of cardiac disease, men have greater LV volumes and mass with sex differences generally persisting after indexation to body size. LV volumes and mass tend to decrease with greater age in both sexes. Female sex and advanced age were both associated with greater LVEF. PMID:24817313

Constructing a community-level amenity index

Treesearch

Joanna Paulson Ganning; Courtney G. Flint

2010-01-01

The study of amenity-driven regional change has proliferated in recent years, especially in the American West. While methods of quantifying amenity levels have progressed, they usually rely on traditional and inflexible methods of creating indices. This research note describes a method of manual indexing that allows a flexible and replicable way of assessing amenity...

Impact of Missing Data for Body Mass Index in an Epidemiologic Study.

PubMed

Razzaghi, Hilda; Tinker, Sarah C; Herring, Amy H; Howards, Penelope P; Waller, D Kim; Johnson, Candice Y

2016-07-01

Objective To assess the potential impact of missing data on body mass index (BMI) on the association between prepregnancy obesity and specific birth defects. Methods Data from the National Birth Defects Prevention Study (NBDPS) were analyzed. We assessed the factors associated with missing BMI data among mothers of infants without birth defects. Four analytic methods were then used to assess the impact of missing BMI data on the association between maternal prepregnancy obesity and three birth defects; spina bifida, gastroschisis, and cleft lip with/without cleft palate. The analytic methods were: (1) complete case analysis; (2) assignment of missing values to either obese or normal BMI; (3) multiple imputation; and (4) probabilistic sensitivity analysis. Logistic regression was used to estimate crude and adjusted odds ratios (aOR) and 95 % confidence intervals (CI). Results Of NBDPS control mothers 4.6 % were missing BMI data, and most of the missing values were attributable to missing height (~90 %). Missing BMI data was associated with birth outside of the US (aOR 8.6; 95 % CI 5.5, 13.4), interview in Spanish (aOR 2.4; 95 % CI 1.8, 3.2), Hispanic ethnicity (aOR 2.0; 95 % CI 1.2, 3.4), and <12 years education (aOR 2.3; 95 % CI 1.7, 3.1). Overall the results of the multiple imputation and probabilistic sensitivity analysis were similar to the complete case analysis. Conclusions Although in some scenarios missing BMI data can bias the magnitude of association, it does not appear likely to have impacted conclusions from a traditional complete case analysis of these data.

A Rapid Auto-Indexing Technology for Designing Readable E-Learning Content

ERIC Educational Resources Information Center

Yu, Pao-Ta; Liao, Yuan-Hsun; Su, Ming-Hsiang; Cheng, Po-Jen; Pai, Chun-Hsuan

2012-01-01

A rapid scene indexing method is proposed to improve retrieval performance for students accessing instructional videos. This indexing method is applied to anchor suitable indices to the instructional video so that students can obtain several small lesson units to gain learning mastery. The method also regulates online course progress. These…

Direct memory access transfer completion notification

DOEpatents

Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

2010-08-17

Methods, apparatus, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA engine on an origin compute node in an injection FIFO buffer, a data descriptor for an application message to be transferred to a target compute node on behalf of an application on the origin compute node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying an address of a completion notification field in application storage for the application; transferring, by the origin DMA engine to the target compute node, the message in dependence upon the data descriptor; and notifying, by the origin DMA engine, the application that the transfer of the message is complete, including performing a local direct put operation to store predesignated notification data at the address of the completion notification field.

Measurement of Refractive Index Using a Michelson Interferometer.

ERIC Educational Resources Information Center

Fendley, J. J.

1982-01-01

Describes a novel and simple method of measuring the refractive index of transparent plates using a Michelson interferometer. Since it is necessary to use a computer program when determining the refractive index, undergraduates could be given the opportunity of writing their own programs. (Author/JN)

Determination of average refractive index of spin coated DCG films for HOE fabrication

NASA Technical Reports Server (NTRS)

Kim, T. J.; Campbell, Eugene W.; Kostuk, Raymond K.

1993-01-01

The refractive index of holographic emulsions is an important parameter needed for designing holographic optical elements (HOE's). Theoretical calculations of the accuracy required for the refractive index and thickness of emulsions needed to meet predetermined Bragg angle conditions are presented. A modified interferometric method is used to find average refractive index of the unexposed and the developed dichromated gelatin holographic films. Slanted transmission HOE's are designed considering the index and thickness variations, and used to verify the index measurement results. The Brewster angle method is used to measure surface index of the unexposed and the developed films. The differences between average index and surface index are discussed. Theoretical calculation of the effects of index variation on diffraction efficiency, and experimental results for index modulation variation caused by process changes are also presented.

From Paper to Practice; Indexing Systems and Ethical Standards.

PubMed

Astaneh, Behrooz; Masoumi, Sarah

2018-04-01

Currently one of the main goals of editors is to attain a higher visibility for their journals. On the other hand, authors strive to publish their research in journals indexed in eminent databases such as Scopus, Thompson Reuters' Web of Science (ISI), Medline, etc. Therefore, clarifying the standards of indexing is of great importance. One of the most important issues in publication is the ethical considerations, which are mainly described by organizations, such as the International Committee of Medical Journal Editors and the Committee on Publication Ethics. In this study, we examined the ethical requirements of high impact databases for indexing journals to investigate whether they mention or mandate journals to adhere to publication ethics. We found that only Scopus mandated journals to state clear ethical policies on their website as a criterion for being indexed while Medline and Directory of Open Access Journals advised journals to adhere to ethics, not mandated, and Web of Science (ISI) and PubMed Central made no mention of ethics as a required criterion for indexing. Based on this short review, there seems to be a gap between the requirements of indexing systems and international guidelines for publication ethics. Currently, most indexing systems have only partially recommended journals to consider ethical issues. In such an atmosphere, we cannot expect journals or as a result, authors to professionally, completely, and whole heartedly implement ethical guidelines as a mandatory rule in their journals and research, when the indexing systems that most editors want to be indexed in and most authors want to be cited in do not mandate such guidelines.

Efficient multifeature index structures for music data retrieval

NASA Astrophysics Data System (ADS)

Lee, Wegin; Chen, Arbee L. P.

1999-12-01

In this paper, we propose four index structures for music data retrieval. Based on suffix trees, we develop two index structures called combined suffix tree and independent suffix trees. These methods still show shortcomings for some search functions. Hence we develop another index, called Twin Suffix Trees, to overcome these problems. However, the Twin Suffix Trees lack of scalability when the amount of music data becomes large. Therefore we propose the fourth index, called Grid-Twin Suffix Trees, to provide scalability and flexibility for a large amount of music data. For each index, we can use different search functions, like exact search and approximate search, on different music features, like melody, rhythm or both. We compare the performance of the different search functions applied on each index structure by a series of experiments.

Graded-Index "Whispering-Gallery" Optical Microresonators

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Maleki, Lute; Iltchenko, Vladimir; Matsko, Andrey

2006-01-01

Graded-index-of-refraction dielectric optical microresonators have been proposed as a superior alternative to prior dielectric optical microresonators, which include microspheres and microtori wherein electromagnetic waves propagate along circumferential paths in "whispering-gallery" modes. The design and method of fabrication of the proposed microresonators would afford improved performance by exploiting a combination of the propagation characteristics of the whisperinggallery modes and the effect of a graded index of refraction on the modes.

Lower Dietary Inflammatory Index Scores Are Associated with Lower Glycemic Index Scores among College Students.

PubMed

Kim, Yeonsoo; Chen, Jie; Wirth, Michael D; Shivappa, Nitin; Hebert, James R

2018-02-07

The association between the Dietary Inflammatory Index (DII ® ), the glycemic index (GI), and the glycemic load (GL) is not known, although it is known that carbohydrates are pro-inflammatory. We aimed to measure the association between the DII and both GI and GL among college students. In this cross-sectional study, 110 college students completed a 3-day food diary, which was used to calculate the DII, the GI, the GL, and the healthy eating index (HEI)-2010. Least square means and 95% confidence intervals of the GI, the GL, and the HEI-2010 were presented per DII tertile using generalized linear mixed models. Participants in tertile 1 of DII scores had lower GI and GL scores, but higher HEI-2010 scores than those in tertile 3. Pearson correlations showed that DII score was positively correlated with the GI score ( r = 0.30, p < 0.01), but negatively correlated with the HEI-2010 ( r = -0.56, p < 0.001). DII score was not correlated with GL score. Results from this study suggest that increased inflammatory potential of diet, as represented by higher DII scores, was associated with increased GI scores and lower quality of diet on the HEI-2010. Use of the DII suggests new directions for dietary approaches for preventing chronic diseases that moves beyond convention by decreasing systemic inflammation.

Randomized Trial of Complete Versus Lesion-Only Revascularization in Patients Undergoing Primary Percutaneous Coronary Intervention for STEMI and Multivessel Disease

PubMed Central

Gershlick, Anthony H.; Khan, Jamal Nasir; Kelly, Damian J.; Greenwood, John P.; Sasikaran, Thiagarajah; Curzen, Nick; Blackman, Daniel J.; Dalby, Miles; Fairbrother, Kathryn L.; Banya, Winston; Wang, Duolao; Flather, Marcus; Hetherington, Simon L.; Kelion, Andrew D.; Talwar, Suneel; Gunning, Mark; Hall, Roger; Swanton, Howard; McCann, Gerry P.

2015-01-01

Background The optimal management of patients found to have multivessel disease while undergoing primary percutaneous coronary intervention (P-PCI) for ST-segment elevation myocardial infarction is uncertain. Objectives CvLPRIT (Complete versus Lesion-only Primary PCI trial) is a U.K. open-label randomized study comparing complete revascularization at index admission with treatment of the infarct-related artery (IRA) only. Methods After they provided verbal assent and underwent coronary angiography, 296 patients in 7 U.K. centers were randomized through an interactive voice-response program to either in-hospital complete revascularization (n = 150) or IRA-only revascularization (n = 146). Complete revascularization was performed either at the time of P-PCI or before hospital discharge. Randomization was stratified by infarct location (anterior/nonanterior) and symptom onset (≤3 h or >3 h). The primary endpoint was a composite of all-cause death, recurrent myocardial infarction (MI), heart failure, and ischemia-driven revascularization within 12 months. Results Patient groups were well matched for baseline clinical characteristics. The primary endpoint occurred in 10.0% of the complete revascularization group versus 21.2% in the IRA-only revascularization group (hazard ratio: 0.45; 95% confidence interval: 0.24 to 0.84; p = 0.009). A trend toward benefit was seen early after complete revascularization (p = 0.055 at 30 days). Although there was no significant reduction in death or MI, a nonsignificant reduction in all primary endpoint components was seen. There was no reduction in ischemic burden on myocardial perfusion scintigraphy or in the safety endpoints of major bleeding, contrast-induced nephropathy, or stroke between the groups. Conclusions In patients presenting for P-PCI with multivessel disease, index admission complete revascularization significantly lowered the rate of the composite primary endpoint at 12 months compared with treating only the

Spectral collocation method with a flexible angular discretization scheme for radiative transfer in multi-layer graded index medium

NASA Astrophysics Data System (ADS)

Wei, Linyang; Qi, Hong; Sun, Jianping; Ren, Yatao; Ruan, Liming

2017-05-01

The spectral collocation method (SCM) is employed to solve the radiative transfer in multi-layer semitransparent medium with graded index. A new flexible angular discretization scheme is employed to discretize the solid angle domain freely to overcome the limit of the number of discrete radiative direction when adopting traditional SN discrete ordinate scheme. Three radial basis function interpolation approaches, named as multi-quadric (MQ), inverse multi-quadric (IMQ) and inverse quadratic (IQ) interpolation, are employed to couple the radiative intensity at the interface between two adjacent layers and numerical experiments show that MQ interpolation has the highest accuracy and best stability. Variable radiative transfer problems in double-layer semitransparent media with different thermophysical properties are investigated and the influence of these thermophysical properties on the radiative transfer procedure in double-layer semitransparent media is also analyzed. All the simulated results show that the present SCM with the new angular discretization scheme can predict the radiative transfer in multi-layer semitransparent medium with graded index efficiently and accurately.

A Multi-Modal Face Recognition Method Using Complete Local Derivative Patterns and Depth Maps

PubMed Central

Yin, Shouyi; Dai, Xu; Ouyang, Peng; Liu, Leibo; Wei, Shaojun

2014-01-01

In this paper, we propose a multi-modal 2D + 3D face recognition method for a smart city application based on a Wireless Sensor Network (WSN) and various kinds of sensors. Depth maps are exploited for the 3D face representation. As for feature extraction, we propose a new feature called Complete Local Derivative Pattern (CLDP). It adopts the idea of layering and has four layers. In the whole system, we apply CLDP separately on Gabor features extracted from a 2D image and depth map. Then, we obtain two features: CLDP-Gabor and CLDP-Depth. The two features weighted by the corresponding coefficients are combined together in the decision level to compute the total classification distance. At last, the probe face is assigned the identity with the smallest classification distance. Extensive experiments are conducted on three different databases. The results demonstrate the robustness and superiority of the new approach. The experimental results also prove that the proposed multi-modal 2D + 3D method is superior to other multi-modal ones and CLDP performs better than other Local Binary Pattern (LBP) based features. PMID:25333290

Citation analysis of faculty publication: beyond Science Citation Index and Social Science Citation Index.

PubMed Central

Reed, K L

1995-01-01

When evaluated for promotion or tenure, faculty members are increasingly judged more on the quality than on the quantity of their scholarly publications. As a result, they want help from librarians in locating all citations to their published works for documentation in their curriculum vitae. Citation analysis using Science Citation Index and Social Science Citation Index provides a logical starting point in measuring quality, but the limitations of these sources leave a void in coverage of citations to an author's work. This article discusses alternative and additional methods of locating citations to published works. PMID:8547915

Dictionary Indexing of Electron Channeling Patterns.

PubMed

Singh, Saransh; De Graef, Marc

2017-02-01

The dictionary-based approach to the indexing of diffraction patterns is applied to electron channeling patterns (ECPs). The main ingredients of the dictionary method are introduced, including the generalized forward projector (GFP), the relevant detector model, and a scheme to uniformly sample orientation space using the "cubochoric" representation. The GFP is used to compute an ECP "master" pattern. Derivative free optimization algorithms, including the Nelder-Mead simplex and the bound optimization by quadratic approximation are used to determine the correct detector parameters and to refine the orientation obtained from the dictionary approach. The indexing method is applied to poly-silicon and shows excellent agreement with the calibrated values. Finally, it is shown that the method results in a mean disorientation error of 1.0° with 0.5° SD for a range of detector parameters.

[Comparative study on promoting blood effects of Danshen-Honghua herb pair with different preparations based on chemometrics and multi-attribute comprehensive index methods].

PubMed

Qu, Cheng; Tang, Yu-Ping; Shi, Xu-Qin; Zhou, Gui-Sheng; Shang, Er-Xin; Shang, Li-Li; Guo, Jian-Ming; Liu, Pei; Zhao, Jing; Zhao, Bu-Chang; Duan, Jin-Ao

2017-08-01

To evaluate the promoting blood circulation and removing blood stasis effects of Danshen-Honghua(DH) herb pair with different preparations (alcohol, 50% alcohol and water) on blood rheology and coagulation functions in acute blood stasis rats, and optimize the best preparation method of DH based on principal component analysis(PCA), hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods. Ice water bath and subcutaneous injection of adrenaline were both used to establish the acute blood stasis rat model. Then the blood stasis rats were administrated intragastrically with DH (alcohol, 50% alcohol and water) extracts. The whole blood viscosity(WBV), plasma viscosity(PV), erythrocyte sedimentation rate(ESR) and haematocrit(HCT) were tested to observe the effects of DH herb pair with different preparations and doses on hemorheology of blood stasis rats; the activated partial thromboplastin time(APTT), thrombin time(TT), prothrombin time(PT), and plasma fibrinogen(FIB) were tested to observe the effects of DH herb pair with different preparations on blood coagulation function and platelet aggregation of blood stasis rats. Then PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods were all used to comprehensively evaluate the total promoting blood circulation and removing blood stasis effects of DH herb pair with different preparations. The hemorheological indexes and coagulation parameters of model group had significant differences with normal blank group. As compared with the model group, the DH herb pair with different preparations at low, middle and high doses could improve the blood hemorheology indexes and coagulation parameters in acute blood stasis rats with dose-effect relation. Based on the PCA, hierarchical cluster heatmap analysis and multi-attribute comprehensive index methods, the high dose group of 50% alcohol extract had the best effect of promoting blood circulation and removing blood

A genotype probability index for multiple alleles and haplotypes.

PubMed

Percy, A; Kinghorn, B P

2005-12-01

We use linear algebra to calculate an index of information content in genotype probabilities which has previously been calculated using trigonometry. The new method can be generalized allowing the index to be calculated for loci with more than two alleles. Applications of this index include its use in genotyping strategies, strategies to manage genetic disorders and in estimation of genotype effects.

Multiple approaches to fine-grained indexing of the biomedical literature.

PubMed

Neveol, Aurelie; Shooshan, Sonya E; Humphrey, Susanne M; Rindflesh, Thomas C; Aronson, Alan R

2007-01-01

The number of articles in the MEDLINE database is expected to increase tremendously in the coming years. To ensure that all these documents are indexed with continuing high quality, it is necessary to develop tools and methods that help the indexers in their daily task. We present three methods addressing a novel aspect of automatic indexing of the biomedical literature, namely producing MeSH main heading/subheading pair recommendations. The methods, (dictionary-based, post- processing rules and Natural Language Processing rules) are described and evaluated on a genetics-related corpus. The best overall performance is obtained for the subheading genetics (70% precision and 17% recall with post-processing rules, 48% precision and 37% recall with the dictionary-based method). Future work will address extending this work to all MeSH subheadings and a more thorough study of method combination.

Old stellar populations. 5: Absorption feature indices for the complete LICK/IDS sample of stars

NASA Technical Reports Server (NTRS)

Worthey, Guy; Faber, S. M.; Gonzalez, J. Jesus; Burstein, D.

1994-01-01

Twenty-one optical absorption features, 11 of which have been previously defined, are automatically measured in a sample of 460 stars. Following Gorgas et al., the indices are summarized in fitting functions that give index strengths as functions of stellar temperature, gravity, and (Fe/H). This project was carried out with the purpose of predicting index strengths in the integrated light of stellar populations of different ages and metallicities, but the data should be valuable for stellar studies in the Galaxy as well. Several of the new indices appear to be promising indicators of metallicity for old stellar populations. A complete list of index data and atmospheric parameters is available in computer-readable form.

CENTRAL, PEDro, PubMed, and EMBASE are the most comprehensive databases indexing randomized controlled trials of physical therapy interventions.

PubMed

Michaleff, Zoe A; Costa, Leonardo O P; Moseley, Anne M; Maher, Christopher G; Elkins, Mark R; Herbert, Robert D; Sherrington, Catherine

2011-02-01

Many bibliographic databases index research studies evaluating the effects of health care interventions. One study has concluded that the Physiotherapy Evidence Database (PEDro) has the most complete indexing of reports of randomized controlled trials of physical therapy interventions, but the design of that study may have exaggerated estimates of the completeness of indexing by PEDro. The purpose of this study was to compare the completeness of indexing of reports of randomized controlled trials of physical therapy interventions by 8 bibliographic databases. This study was an audit of bibliographic databases. Prespecified criteria were used to identify 400 reports of randomized controlled trials from the reference lists of systematic reviews published in 2008 that evaluated physical therapy interventions. Eight databases (AMED, CENTRAL, CINAHL, EMBASE, Hooked on Evidence, PEDro, PsycINFO, and PubMed) were searched for each trial report. The proportion of the 400 trial reports indexed by each database was calculated. The proportions of the 400 trial reports indexed by the databases were as follows: CENTRAL, 95%; PEDro, 92%; PubMed, 89%; EMBASE, 88%; CINAHL, 53%; AMED, 50%; Hooked on Evidence, 45%; and PsycINFO, 6%. Almost all of the trial reports (99%) were found in at least 1 database, and 88% were indexed by 4 or more databases. Four trial reports were uniquely indexed by a single database only (2 in CENTRAL and 1 each in PEDro and PubMed). The results are only applicable to searching for English-language published reports of randomized controlled trials evaluating physical therapy interventions. The 4 most comprehensive databases of trial reports evaluating physical therapy interventions were CENTRAL, PEDro, PubMed, and EMBASE. Clinicians seeking quick answers to clinical questions could search any of these databases knowing that all are reasonably comprehensive. PEDro, unlike the other 3 most complete databases, is specific to physical therapy, so studies not

A bicycle safety index for evaluating urban street facilities.

PubMed

Asadi-Shekari, Zohreh; Moeinaddini, Mehdi; Zaly Shah, Muhammad

2015-01-01

The objectives of this research are to conceptualize the Bicycle Safety Index (BSI) that considers all parts of the street and to propose a universal guideline with microscale details. A point system method comparing existing safety facilities to a defined standard is proposed to estimate the BSI. Two streets in Singapore and Malaysia are chosen to examine this model. The majority of previous measurements to evaluate street conditions for cyclists usually cannot cover all parts of streets, including segments and intersections. Previous models also did not consider all safety indicators and cycling facilities at a microlevel in particular. This study introduces a new concept of a practical BSI to complete previous studies using its practical, easy-to-follow, point system-based outputs. This practical model can be used in different urban settings to estimate the level of safety for cycling and suggest some improvements based on the standards.

A nonclassical Radau collocation method for solving the Lane-Emden equations of the polytropic index 4.75 ≤ α < 5

NASA Astrophysics Data System (ADS)

Tirani, M. D.; Maleki, M.; Kajani, M. T.

2014-11-01

A numerical method for solving the Lane-Emden equations of the polytropic index α when 4.75 ≤ α ≤ 5 is introduced. The method is based upon nonclassical Gauss-Radau collocation points and Freud type weights. Nonclassical orthogonal polynomials, nonclassical Radau points and weighted interpolation are introduced and are utilized in the interval [0,1]. A smooth, strictly monotonic transformation is used to map the infinite domain x ∈ [0,∞) onto a half-open interval t ∈ [0,1). The resulting problem on the finite interval is then transcribed to a system of nonlinear algebraic equations using collocation. The method is easy to implement and yields very accurate results.

Quality of data gathered with International Caries Detection and Assessment System (ICDAS) assessment and dentists' perceptions of completion of dental records.

PubMed

Aidara, Adjaratou W; Pitts, Nigel; Markowska, Neda; Bourgeois, Denis

2011-12-01

The FDI World Dental Federation is engaged in a global consultation process to assess the potential challenges and impacts of the introduction of a preventive model to existing systems for caries management. The aims of this study were to evaluate the quality of dental disease data collected with the International Caries Detection and Assessment System (ICDAS) index and dentists' perceptions with regard to the collection of data using the 'European Global Oral Health Indicators Development' (EGOHID) survey methods, and to estimate the mean time required for completion of the dental records according to the practitioners' perceptions. The data - 2877 clinical examinations and 2877 individual assessments - were collected in 2008 using a network of 146 sentinel dentists in eight European countries. A clinical survey was completed for each participant and the dentist gave a detailed assessment of each patient investigated. This study shows that practitioners' perceptions have an impact on the mean time required to complete the dental record. Mistakes originate from dentists' attempts to simplify the completion of many boxes. This results in a larger number of missing data than of error codes. These missing data have an effect on the time required for information collection. The quality of the data collected will allow the establishment of recommendations based on this method. © 2011 FDI World Dental Federation.

U.S. Geological Survey Near Real-Time Dst Index

USGS Publications Warehouse

Gannon, J.L.; Love, J.J.; Friberg, P.A.; Stewart, D.C.; Lisowski, S.W.

2011-01-01

The operational version of the United States Geological Survey one-minute Dst index (a global geomagnetic disturbance-intensity index for scientific studies and definition of space-weather effects) uses either four- or three-station input (including Honolulu, Hawaii; San Juan, Puerto Rico; Hermanus, South Africa; and Kakioka, Japan; or Honolulu, San Juan and Guam) and a method based on the U.S. Geological Survey definitive Dst index, in which Dst is more rigorously calculated. The method uses a combination of time-domain techniques and frequency-space filtering to produce the disturbance time series at an individual observatory. The operational output is compared to the U.S. Geological Survey one-minute Dst index (definitive version) and to the Kyoto (Japan) Final Dst to show that the U.S. Geological Survey operational output matches both definitive indices well.

The heat rate index indicator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lasasso, M.; Runyan, B.; Napoli, J.

1995-06-01

This paper describes a method of tracking unit performance through the use of a reference number called the Heat Rate Index Indicator. The ABB Power Plant Controls OTIS performance monitor is used to determine when steady load conditions exist and then to collect controllable and equipment loss data which significantly impact thermal efficiency. By comparing these loss parameters to those found during the previous heat balance, it is possible to develop a new adjusted heat rate curve. These impacts on heat rate are used to changes the shape of the tested heat rate curve by the appropriate percentages over amore » specified load range. Mathcad is used to determine the Heat Rate Index by integrating for the areas beneath the adjusted heat rate curve and a heat rate curve that represents the unit`s ideal heat rate curve is the Heat Rate Index. An index of 1.0 indicates that the unit is operating at an ideal efficiency, while an index of less than 1.0 indicates that the unit is operating at less than ideal conditions. A one per cent change in the Heat Rate Index is equivalent to a one percent change in heat rate. The new shape of the adjusted heat rate curve and the individual curves generated from the controllable and equipment loss parameters are useful for determining performance problems in specific load ranges.« less

[Validation of the nutritional index in Mexican pre-teens with the sensitivity and specificity method].

PubMed

Saucedo-Molina, T J; Gómez-Peresmitré, G

1998-01-01

To determine the diagnostic validity of the nutritional index (NI) in a sample of Mexican preadolescents. A total of 256 preadolescents, between 10 and 12 years old, male and female, students from Mexico City, were used to establish the diagnostic validity of NI using the sensitivity and specificity method. The findings show that the conventional NI cut-off points showed good sensitivity and specificity for the diagnosis of low weight, normality and obesity but not for overweight. When the cut-off points of NI were normalized, the sensitivity, specificity and prediction potency values were more suitable in all categories. When working with preadolescents, it is better to use the new cut-off points of NI, to obtain more reliable diagnosis.

High-refractive index of acrylate embedding resin clarifies mouse brain tissue

NASA Astrophysics Data System (ADS)

Zhou, Hongfu; Xiong, Yumiao; Wang, Yu; Wang, Xiaojun; Li, Pei; Gang, Yadong; Liu, Xiuli; Zeng, Shaoqun

2017-11-01

Biological tissue transparency combined with light-sheet fluorescence microscopy is a useful method for studying the neural structure of biological tissues. The development of light-sheet fluorescence microscopy also promotes progress in biological tissue clearing methods. The current clarifying methods mostly use liquid reagent to denature protein or remove lipids first, to eliminate or reduce the scattering index or refractive index of the biological tissue. However, denaturing protein and removing lipids require complex procedures or an extended time period. Therefore, here we have developed acrylate resin with a high refractive index, which causes clearing of biological tissue directly after polymerization. This method can improve endogenous fluorescence retention by adjusting the pH value of the resin monomer.

Women bound to be active: differences in long-term physical activity between completers and noncompleters of a book club intervention.

PubMed

Huberty, Jennifer L; Ehlers, Diane; Coleman, Jason; Gao, Yong; Elavsky, Steriani

2013-03-01

Ideal approaches to increasing long-term physical activity (PA) adherence in women remain unclear. This study used a longitudinal mixed-methods approach to 1) determine the effectiveness of an 8-month book club intervention for increasing PA participation and self-worth, and reducing barriers at 1-year followup; and 2) identify reasons why completers and noncompleters did or did not maintain PA. One year after the cessation of Women Bound to be Active (WBA), completers (participated in posttesting; n = 30) and noncompleters (did not participate in posttesting; n = 22) responded to questionnaires and interviews assessing their body mass index (BMI), current PA participation, barriers, and global self-worth. Compared with noncompleters, completers reported decreases in BMI, higher motivation for PA, higher ratio of benefits to barriers, and more consistent PA. Both groups still reported barriers to PA, especially time; however, completers more often reported strategies for overcoming these barriers. Completers more directly discussed the impact of their improved self-worth on their PA participation. In the future, a greater focus on time management and self-regulation strategies should be emphasized in PA interventions, specifically those that focus on women. This may help to prevent program and long-term PA attrition.

Environmental Chemistry Methods (ECM) Index - 0-9

EPA Pesticide Factsheets

Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with a number as the first character.

Creating a school nutrition environment index and pilot testing it in elementary and middle schools in urban South Korea

PubMed Central

Kwon, Kwang-il; Kweon, Soon Ju; Wang, Youfa; Gittelsohn, Joel

2017-01-01

BACKGROUND/OBJECTIVES The role of a school's nutrition environment in explaining students' eating behaviors and weight status has not been examined in an Asian setting. The purpose of this study was to create a school nutrition environment index and to pilot test the index in elementary and middle schools in urban South Korea. SUBJECTS/METHODS This study used a mixed-methods approach. Environment assessment tools were developed based on formative research, which comprised literature reviews, in-depth interviews, and focus group discussions. Key elements from the formative research were included in the assessment tool, which consisted of a structured survey questionnaire for school dietitians. Fifteen school dietitians from 7 elementary and 8 middle schools in Seoul completed the questionnaire. RESULTS The formative research revealed four main sections that guided a summary index to assess a school's nutrition environment: resource availability, education and programs, dietitians' perceptions and characteristics, and school lunch menu. Based on the literature reviews and interviews, an index scoring system was developed. The total possible score from the combined four index sections was 40 points. From the 15 schools participating in the pilot survey, the mean school nutrition-environment index was 22.5 (standard deviation ± 3.2; range 17-28). The majority of the schools did not offer classroom-based nutrition education or nutrition counseling for students and parents. The popular modes of nutrition education were school websites, posters, and newsletters. CONCLUSIONS This paper illustrates the process used to develop an instrument to assess a school's nutrition environment. Moreover, it presents the steps used to develop a scoring system for creation of a school nutrition environment index. As pilot testing indicated the total index score has some variation across schools, we suggest applying this instrument in future studies involving a larger number of schools

A new comprehensive index for drought monitoring with TM data

NASA Astrophysics Data System (ADS)

Wang, Yuanyuan

2017-10-01

Drought is one of the most important and frequent natural hazards to agriculture production in North China Plain. To improve agriculture water management, accurate drought monitoring information is needed. This study proposed a method for comprehensive drought monitoring by combining a meteorological index and three satellite drought indices of TM data together. SPI (Standard Precipitation Index), the meteorological drought index, is used to measure precipitation deficiency. Three satellite drought indices (Temperature Vegetation Drought Index, Land Surface Water Index, Modified Perpendicular Drought Index) are used to evaluate agricultural drought risk by exploring data from various channels (VIS, NIR, SWIR, TIR). Considering disparities in data ranges of different drought indices, normalization is implemented before combination. First, SPI is normalized to 0 — 100 given that its normal range is -4 - +4. Then, the three satellite drought indices are normalized to 0 - 100 according to the maximum and minimum values in the image, and aggregated using weighted average method (the result is denoted as ADI, Aggregated drought index). Finally, weighed geometric mean of SPI and ADI are calculated (the result is denoted as DIcombined). A case study in North China plain using three TM images acquired during April-May 2007 show that the method proposed in this study is effective. In spatial domain, DIcombined demonstrates dramatically more details than SPI; in temporal domain, DIcombined shows more reasonable drought development trajectory than satellite indices that are derived from independent TM images.

Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods

NASA Astrophysics Data System (ADS)

Majidi, Omid; Jahazi, Mohammad; Bombardier, Nicolas; Samuel, Ehab

2017-10-01

The strain rate sensitivity index, m-value, is being applied as a common tool to evaluate the impact of the strain rate on the viscoplastic behaviour of materials. The m-value, as a constant number, has been frequently taken into consideration for modeling material behaviour in the numerical simulation of superplastic forming processes. However, the impact of the testing variables on the measured m-values has not been investigated comprehensively. In this study, the m-value for a superplastic grade of an aluminum alloy (i.e., AA5083) has been investigated. The conditions and the parameters that influence the strain rate sensitivity for the material are compared with three different testing methods, i.e., monotonic uniaxial tension test, strain rate jump test and stress relaxation test. All tests were conducted at elevated temperature (470°C) and at strain rates up to 0.1 s-1. The results show that the m-value is not constant and is highly dependent on the applied strain rate, strain level and testing method.

Multi-Index Attribution of Beijing's 2013 "Airpocalypse"

NASA Astrophysics Data System (ADS)

Callahan, C.; Diffenbaugh, N. S.; Horton, D. E.

2017-12-01

Poor air quality causes 2 to 4 million premature deaths per year globally. Individual high-impact events, like Beijing's January 2013 "airpocalypse," have drawn significant attention, as they have demonstrated that short-lived air quality events can have outsized effects on public health and economic vitality. Poor air quality events are the result of emission of pollutants and the meteorological conditions favorable to their accumulation in the near-surface environment. Accumulation occurs when pollutants are not dispersed or scavenged from the atmosphere. The most important meteorological precursors of these conditions include lack of precipitation, low wind speeds, and vertical temperature inversions. Recent reports of extreme air quality, in conjunction with projected future changes in some meteorological air quality indices, raise the question: have the meteorological conditions that shape air quality changed in frequency, intensity, or duration over the observational era? Here we assess whether anthropogenic climate change has altered meteorological conditions conducive to poor air quality. To gain a more complete picture of the effect of anthropogenic change on air quality, we use three indices that quantify poor air quality: the Pollution Potential Index (Zou et al, 2017), which measures temperature inversions and surface wind speeds, the Haze Weather Index (Cai et al, 2017), which measures temperature inversions and mid-level wind speeds, and the Air Stagnation Index (Horton et al, 2014), which measures precipitation, surface wind speeds, and mid-level wind speeds. Drawing on the attribution methods of Diffenbaugh et al (2017), we assess the contribution of observed meteorological trends to the magnitude of air quality events, the return interval of events in the observational record, historical simulated climate, and pre-industrial simulated climate, and the probability of the observed trend in historical and pre-industrial simulated climates. Particular

Development and evaluation of the Dutch Healthy Diet index 2015.

PubMed

Looman, Moniek; Feskens, Edith Jm; de Rijk, Mariëlle; Meijboom, Saskia; Biesbroek, Sander; Temme, Elisabeth Hm; de Vries, Jeanne; Geelen, Anouk

2017-09-01

To update the Dutch Healthy Diet index, a measure of diet quality, to reflect adherence to the Dutch dietary guidelines 2015 and to evaluate against participants' characteristics and nutrient intakes with the score based on 24 h recall (24 hR) data and FFQ data. The Dutch Healthy Diet index 2015 (DHD15-index) consists of fifteen components representing the fifteen food-based Dutch dietary guidelines of 2015. Per component the score ranges between 0 and 10, resulting in a total score between 0 (no adherence) and 150 (complete adherence). Wageningen area, the Netherlands, 2011-2013. Data of 885 men and women, aged 20-70 years, participating in the longitudinal NQplus study, who filled out two 24 hR and one FFQ, were used. Mean (sd) score of the DHD15-index was 68·7 (16·1) for men and 79·4 (16·0) for women. Significant inverse trends were found between the DHD15-index and BMI, smoking, and intakes of energy, total fat and saturated fat. Positive trends were seen across sex-specific quintiles of the DHD15-index score with energy-adjusted micronutrient intakes. Mean DHD15-index score of the FFQ data was 15·5 points higher compared with 24 hR data, with a correlation coefficient of 0·56 between the scores. Observed trends of the DHD15-index based on FFQ with participant characteristics, macronutrient and energy-adjusted micronutrient intakes were similar to those with the DHD15-index based on 24 hR. The DHD15-index score assesses adherence to the Dutch dietary guidelines 2015 and indicates diet quality. The DHD15-index score can be based on 24 hR data and on FFQ data.

NASA directives master list and index

NASA Technical Reports Server (NTRS)

1993-01-01

This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Part A is a master list of management directives in force as of March 31, 1993. Chapter 1 contains introductory informative material on how to use this Handbook. Chapter 2 is a complete master list of Agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B is the index to NASA management directives in force as of March 31, 1993. This part contains an in-depth alphabetical index to all NASA management directives other than Handbooks. NHB's 1610.6, 'NASA Personnel Security Handbook,' 1620.3, 'NASA Physical Security Handbook,' 1640.4, 'NASA Information Security Program,' 1900.1, 'Standards of Conduct for NASA Employees,' 5103.6, 'Source Evaluation Board Handbook,' and 7400.1, 'Budget Administration Manual,' are indexed in-depth. All other NHB's are indexed by titles only.

A Materials Index--Its Storage, Retrieval, and Display

ERIC Educational Resources Information Center

Rosen, Carol Z.

1973-01-01

An experimental procedure for indexing physical materials based on simple syntactical rules was tested by encoding the materials in the journal, Applied Physics Letters,'' to produce a materials index. The syntax and numerous examples together with an indication of the method by which retrieval can be effected are presented. (5 references)…

New Approaches for Calculating Moran’s Index of Spatial Autocorrelation

PubMed Central

Chen, Yanguang

2013-01-01

Spatial autocorrelation plays an important role in geographical analysis; however, there is still room for improvement of this method. The formula for Moran’s index is complicated, and several basic problems remain to be solved. Therefore, I will reconstruct its mathematical framework using mathematical derivation based on linear algebra and present four simple approaches to calculating Moran’s index. Moran’s scatterplot will be ameliorated, and new test methods will be proposed. The relationship between the global Moran’s index and Geary’s coefficient will be discussed from two different vantage points: spatial population and spatial sample. The sphere of applications for both Moran’s index and Geary’s coefficient will be clarified and defined. One of theoretical findings is that Moran’s index is a characteristic parameter of spatial weight matrices, so the selection of weight functions is very significant for autocorrelation analysis of geographical systems. A case study of 29 Chinese cities in 2000 will be employed to validate the innovatory models and methods. This work is a methodological study, which will simplify the process of autocorrelation analysis. The results of this study will lay the foundation for the scaling analysis of spatial autocorrelation. PMID:23874592

[Ryan index for detection of laryngopharyngeal reflux diseases].

PubMed

Wu, W; Wang, G; Wang, L; Liu, H D; Wang, Q; Xu, X H; Ding, R Y; Xu, B X; Han, H L; Zhou, Y; Gong, J; Wang, H N; Li, B W; Sun, Z Z

2017-12-07

Objective: To explore the utility of pharyngeal pH monitoring which positive standard is Ryan index in diagnosis of laryngopharyngeal reflux disease. Methods: In a retrospective study, clinical data of 590 patients who had symptoms laryngopharyngeal reflux disease from February 2016 to March 2017 were analyzed. All patients were received electronic laryngoscopy, assessment of reflux symptom index(RSI) and reflux finding score(RFS), and pharyngeal pH monitoring. SPSS 19.0 software was used to analyze the date. Results: There were 94 patients whose Ryan index were positive(15.93%). Among the 94 patients, 70 were positive during upright, 12 during supine and 12 during both upright and supine. There were 40 patients(6.78%)with pH decline events related to symptoms, while those Ryan index were normal. There were 536(90.85%), 417(70.68%), 233(39.49%) and 117(19.83%) patients with pH<6.5, pH<6.0, pH<5.5 and pH<5.0 events respectively. The positive rate of RSI, RFS, RSI and RFS, RSI or RFS were 44.24%, 16.78%, 7.12%, 53.90% respectively. The RFS score in Ryan index positive group was higher than that in Ryan index negative group[(8.2±2.4) vs (4.0±2.9), u =5.424, P <0.05], while the RSI score in Ryan index positive group was not statistically different from that in Ryan index negative group[(11.3±6.2) vs (12.7±5.8), t =1.247, P =0.167]. Conclusions: Pharyngeal pH monitoring is an objective and non-invasive method which can reflect laryngopharyngeal reflux directly. However, with the Ryan index as a criterion for the diagnosis of laryngopharyngeal reflux disease, partial patients may be missed. Further studies are needed to obtain more accurate and objective laryngopharyngeal pH statistical index for diagnosis of laryngopharyngeal reflux disease.

Japanese version of the Dermatology Life Quality Index: validity and reliability in patients with acne.

PubMed

Takahashi, Natsuko; Suzukamo, Yoshimi; Nakamura, Motonobu; Miyachi, Yoshiki; Green, Joseph; Ohya, Yukihiro; Finlay, Andrew Y; Fukuhara, Shunichi

2006-08-03

Patient-reported quality of life is strongly affected by some dermatologic conditions. We developed a Japanese version of the Dermatology Life Quality Index (DLQI-J) and used psychometric methods to examine its validity and reliability. The Japanese version of the DLQI was created from the original (English) version, using a standard method. The DLQI-J was then completed by 197 people, to examine its validity and reliability. Some participants completed the DLQI-J a second time, 3 days later, to examine the reproducibility of their responses. In addition to the DLQI-J, the participants completed parts of the SF-36 and gave data on their demographic and clinical characteristics. Their physicians provided information on the location and clinical severity of the skin disease. The participants reported no difficulties in answering the DLQI-J items. Their mean age was 24.8 years, 77.2% were female, and 78.7% had acne vulgaris. The mean score of DLQI was 3.99(SD: 3.99). The responses were found to be reproducible and stable. Results of principal-component and factor analysis suggested that this scale measured one construct. The correlations of DLQI-J scores with sex or age were very poor, but those with SF-36 scores and with clinical severity were high. The DLQI-J provides valid and reliable data despite having only a small number of items.

String and Sticky Tape Experiments: Refractive Index of Liquids.

ERIC Educational Resources Information Center

Edge, R. D., Ed.

1979-01-01

Describes a simple method of measuring the refractive index of a liquid using a paper cup, a liquid, a pencil, and a ruler. Uses the ratio between the actual depth and the apparent depth of the cup to calculate the refractive index. (GA)

Self-Referenced Method for Estimating Refractive Index and Absolute Absorption of Loose Semiconductor Powders

DOE PAGES

Huang, Huafeng; Colabello, Diane M.; Sklute, Elizabeth C.; ...

2017-04-23

The absolute absorption coefficient, α(E), is a critical design parameter for devices using semiconductors for light harvesting associated with renewable energy production, both for classic technologies such as photovoltaics and for emerging technologies such as direct solar fuel production. While α(E) is well-known for many classic simple semiconductors used in photovoltaic applications, the absolute values of α(E) are typically unknown for the complex semiconductors being explored for solar fuel production due to the absence of single crystals or crystalline epitaxial films that are needed for conventional methods of determining α(E). In this work, a simple self-referenced method for estimating bothmore » the refractive indices, n(E), and absolute absorption coefficients, α(E), for loose powder samples using diffuse reflectance data is demonstrated. In this method, the sample refractive index can be deduced by refining n to maximize the agreement between the relative absorption spectrum calculated from bidirectional reflectance data (calculated through a Hapke transform which depends on n) and integrating sphere diffuse reflectance data (calculated through a Kubleka–Munk transform which does not depend on n). This new method can be quickly used to screen the suitability of emerging semiconductor systems for light-harvesting applications. The effectiveness of this approach is tested using the simple classic semiconductors Ge and Fe 2O 3 as well as the complex semiconductors La 2MoO 5 and La 4Mo 2O 11. The method is shown to work well for powders with a narrow size distribution (exemplified by Fe 2O 3) and to be ineffective for semiconductors with a broad size distribution (exemplified by Ge). As such, it provides a means for rapidly estimating the absolute optical properties of complex solids which are only available as loose powders.« less

Effect of blood sampling schedule and method of calculating the area under the curve on validity and precision of glycaemic index values.

PubMed

Wolever, Thomas M S

2004-02-01

To evaluate the suitability for glycaemic index (GI) calculations of using blood sampling schedules and methods of calculating area under the curve (AUC) different from those recommended, the GI values of five foods were determined by recommended methods (capillary blood glucose measured seven times over 2.0 h) in forty-seven normal subjects and different calculations performed on the same data set. The AUC was calculated in four ways: incremental AUC (iAUC; recommended method), iAUC above the minimum blood glucose value (AUCmin), net AUC (netAUC) and iAUC including area only before the glycaemic response curve cuts the baseline (AUCcut). In addition, iAUC was calculated using four different sets of less than seven blood samples. GI values were derived using each AUC calculation. The mean GI values of the foods varied significantly according to the method of calculating GI. The standard deviation of GI values calculating using iAUC (20.4), was lower than six of the seven other methods, and significantly less (P<0.05) than that using netAUC (24.0). To be a valid index of food glycaemic response independent of subject characteristics, GI values in subjects should not be related to their AUC after oral glucose. However, calculating GI using AUCmin or less than seven blood samples resulted in significant (P<0.05) relationships between GI and mean AUC. It is concluded that, in subjects without diabetes, the recommended blood sampling schedule and method of AUC calculation yields more valid and/or more precise GI values than the seven other methods tested here. The only method whose results agreed reasonably well with the recommended method (ie. within +/-5 %) was AUCcut.

Gradient index liquid crystal devices and method of fabrication thereof

DOEpatents

Lee, J.C.; Jacobs, S.

1991-10-29

Laser beam apodizers using cholesteric liquid crystals provides soft edge profile by use of two separate cholesteric liquid crystal mixtures with different selective reflection bands which in an overlap region have a gradient index where reflectivity changes as a function of position. The apodizers can be configured as a one-dimensional beam apod INTRODUCTION The U.S. government has rights in the invention under Contract No. DE-FC03-85DP40200 between the University of Rochester and the Department of Energy.

Gradient index liquid crystal devices and method of fabrication thereof

DOEpatents

Lee, Jae-Cheul; Jacobs, Stephen

1991-01-01

Laser beam apodizers using cholesteric liquid crystals provides soft edge profile by use of two separate cholesteric liquid crystal mixtures with different selective reflection bands which in an overlap region have a gradient index where reflectivity changes as a function of position. The apodizers can be configured as a one-dimensional beam apod INTRODUCTION The U.S. government has rights in the invention under Contract No. DE-FC03-85DP40200 between the University of Rochester and the Department of Energy.

Bayesian Non-Stationary Index Gauge Modeling of Gridded Precipitation Extremes

NASA Astrophysics Data System (ADS)

Verdin, A.; Bracken, C.; Caldwell, J.; Balaji, R.; Funk, C. C.

2017-12-01

We propose a Bayesian non-stationary model to generate watershed scale gridded estimates of extreme precipitation return levels. The Climate Hazards Group Infrared Precipitation with Stations (CHIRPS) dataset is used to obtain gridded seasonal precipitation extremes over the Taylor Park watershed in Colorado for the period 1981-2016. For each year, grid cells within the Taylor Park watershed are aggregated to a representative "index gauge," which is input to the model. Precipitation-frequency curves for the index gauge are estimated for each year, using climate variables with significant teleconnections as proxies. Such proxies enable short-term forecasting of extremes for the upcoming season. Disaggregation ratios of the index gauge to the grid cells within the watershed are computed for each year and preserved to translate the index gauge precipitation-frequency curve to gridded precipitation-frequency maps for select return periods. Gridded precipitation-frequency maps are of the same spatial resolution as CHIRPS (0.05° x 0.05°). We verify that the disaggregation method preserves spatial coherency of extremes in the Taylor Park watershed. Validation of the index gauge extreme precipitation-frequency method consists of ensuring extreme value statistics are preserved on a grid cell basis. To this end, a non-stationary extreme precipitation-frequency analysis is performed on each grid cell individually, and the resulting frequency curves are compared to those produced by the index gauge disaggregation method.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

Improvement of kurtosis-guided-grams via Gini index for bearing fault feature identification

NASA Astrophysics Data System (ADS)

Miao, Yonghao; Zhao, Ming; Lin, Jing

2017-12-01

A group of kurtosis-guided-grams, such as Kurtogram, Protrugram and SKRgram, is designed to detect the resonance band excited by faults based on the sparsity index. However, a common issue associated with these methods is that they tend to choose the frequency band with individual impulses rather than the desired fault impulses. This may be attributed to the selection of the sparsity index, kurtosis, which is vulnerable to impulsive noise. In this paper, to solve the problem, a sparsity index, called the Gini index, is introduced as an alternative estimator for the selection of the resonance band. It has been found that the sparsity index is still able to provide guidelines for the selection of the fault band without prior information of the fault period. More importantly, the Gini index has unique performance in random-impulse resistance, which renders the improved methods using the index free from the random impulse caused by external knocks on the bearing housing, or electromagnetic interference. By virtue of these advantages, the improved methods using the Gini index not only overcome the shortcomings but are more effective under harsh working conditions, even in the complex structure. Finally, the comparison between the kurtosis-guided-grams and the improved methods using the Gini index is made using the simulated and experimental data. The results verify the effectiveness of the improvement by both the fixed-axis bearing and planetary bearing fault signals.

Data transfer using complete bipartite graph

NASA Astrophysics Data System (ADS)

Chandrasekaran, V. M.; Praba, B.; Manimaran, A.; Kailash, G.

2017-11-01

Information exchange extent is an estimation of the amount of information sent between two focuses on a framework in a given time period. It is an extremely significant perception in present world. There are many ways of message passing in the present situations. Some of them are through encryption, decryption, by using complete bipartite graph. In this paper, we recommend a method for communication using messages through encryption of a complete bipartite graph.

High-refractive index of acrylate embedding resin clarifies mouse brain tissue.

PubMed

Zhou, Hongfu; Xiong, Yumiao; Wang, Yu; Wang, Xiaojun; Li, Pei; Gang, Yadong; Liu, Xiuli; Zeng, Shaoqun

2017-11-01

Biological tissue transparency combined with light-sheet fluorescence microscopy is a useful method for studying the neural structure of biological tissues. The development of light-sheet fluorescence microscopy also promotes progress in biological tissue clearing methods. The current clarifying methods mostly use liquid reagent to denature protein or remove lipids first, to eliminate or reduce the scattering index or refractive index of the biological tissue. However, denaturing protein and removing lipids require complex procedures or an extended time period. Therefore, here we have developed acrylate resin with a high refractive index, which causes clearing of biological tissue directly after polymerization. This method can improve endogenous fluorescence retention by adjusting the pH value of the resin monomer. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Comparability among four invertebrate sampling methods and two multimetric indexes, Fountain Creek Basin, Colorado, 2010–2012

USGS Publications Warehouse

Bruce, James F.; Roberts, James J.; Zuellig, Robert E.

2018-05-24

The U.S. Geological Survey (USGS), in cooperation with Colorado Springs City Engineering and Colorado Springs Utilities, analyzed previously collected invertebrate data to determine the comparability among four sampling methods and two versions (2010 and 2017) of the Colorado Benthic Macroinvertebrate Multimetric Index (MMI). For this study, annual macroinvertebrate samples were collected concurrently (in space and time) at 15 USGS surface-water gaging stations in the Fountain Creek Basin from 2010 to 2012 using four sampling methods. The USGS monitoring project in the basin uses two of the methods and the Colorado Department of Public Health and Environment recommends the other two. These methods belong to two distinct sample types, one that targets single habitats and one that targets multiple habitats. The study results indicate that there are significant differences in MMI values obtained from the single-habitat and multihabitat sample types but methods from each program within each sample type produced comparable values. This study also determined that MMI values calculated by different versions of the Colorado Benthic Macroinvertebrate MMI are indistinguishable. This indicates that the Colorado Department of Public Health and Environment methods are comparable with the USGS monitoring project methods for single-habitat and multihabitat sample types. This report discusses the direct application of the study results to inform the revision of the existing USGS monitoring project in the Fountain Creek Basin.

Simultaneous measurement of refractive index and thickness by combining low-coherence interferometry and confocal optics.

PubMed

Kim, Seokhan; Na, Jihoon; Kim, Myoung Jin; Lee, Byeong Ha

2008-04-14

We propose and demonstrate novel methods that enable simultaneous measurements of the phase index, the group index, and the geometrical thickness of an optically transparent object by combining optical low-coherence interferometer and confocal optics. The low-coherence interferometer gives information relating the group index with the thickness, while the confocal optics allows access to the phase index related with the thickness of the sample. To relate these, two novel methods were devised. In the first method, the dispersion-induced broadening of the low-coherence envelop signal was utilized, and in the second method the frequency derivative of the phase index was directly obtained by taking the confocal measurements at several wavelengths. The measurements were made with eight different samples; B270, CaF2, two of BK7, two of fused silica, cover glass, and cigarette cover film. The average measurement errors of the first and the second methods were 0.123% and 0.061% in the geometrical thickness, 0.133% and 0.066% in the phase index, and 0.106% and 0.057% in the group index, respectively.

Index Theory of One Dimensional Quantum Walks and Cellular Automata