Science.gov

Sample records for composition chimique des

  1. Etude des phenomenes chimiques au contact entre le bloc cathodique et la barre collectrice d'une cellule d'electrolyse d'aluminium

    NASA Astrophysics Data System (ADS)

    Lebeuf, Martin

    La production d'aluminium est une industrie importante au Québec. Les propriétés de ce métal le vouent à de multiples usages présents et futurs dans le cadre d'une économie moderne durable. Toutefois, le procédé Hall-Héroult est très énergivore et des progrès demeurent donc nécessaires pour en diminuer les coûts financiers et environnementaux. Parmi les améliorations envisageables de la cellule d'électrolyse se trouve le contact entre la cathode et la barre collectrice, qui doit offrir une faible résistivité au passage du courant électrique. En cours d'opération de la cellule, ce contact a tendance à se dégrader, générant des pertes énergétiques significatives. Les causes de cette dégradation, pouvant provenir de phénomènes chimiques, thermiques, mécaniques et/ou électriques, demeurent mal comprises. Le but du présent projet était donc d'étudier les phénomènes chimiques se produisant au contact bloc-barre de la cellule d'électrolyse Hall-Héroult. En premier lieu, un aspect crucial à considérer est la pénétration du bain électrolytique dans la cathode, car des composés de bain atteignent éventuellement la barre collectrice et peuvent y réagir. A cet effet, une méthode novatrice a été développée afin d'étudier les cathodes et la pénétration du bain dans celles-ci à l'aide de la microtomographie à rayons X. Cette méthode rapide et efficace s'est avérée fort utile dans le projet et a un potentiel important pour l'étude future des cathodes et des phénomènes qui s'y produisent. Ensuite, une cellule d'électrolyse rectangulaire à petite échelle a été développée. Plusieurs phénomènes observés 'en industrie sur des autopsies de cellules post-opération et rapportés dans la littérature ont été reproduis avec succès à l'aide de cette cellule expérimentale. Puis, des tests sans électrolyse, ciblant l'effet du bain électrolytique sur l'acier, ont aussi été conçus et complétés afin de s

  2. Etude des phenomenes de penetration des especes chimiques dans les revetements cathodiques des cuves d'electrolyse de l'aluminium

    NASA Astrophysics Data System (ADS)

    Brisson, Pierre-Yves

    Cette these decrit l'etude effectuee sur les phenomenes d'insertion du sodium et de penetration du bain electrolytique dans les revetements cathodiques des cuves d'electrolyse de l'aluminium. L'etude fut effectuee a l'aide d'un montage permettant d'effectuer l'electrolyse en laboratoire. Trois types de revetement cathodiques furent etudies : des blocs semi-graphitique, des blocs graphitiques et des blocs graphitises. L'insertion du sodium dans les trois differents types de blocs fut etudiee a l'aide de la spectrometrie des photoelectrons X (XPS). L'analyse a permis de mettre en evidence deux formes de sodium dans l'anthracite et la phase liante des materiaux semi-graphitiques et graphitiques, indiquant qu'une fraction du sodium se retrouve sous forme adsorbee dans les micropores des materiaux alors que l'autre fraction est inseree dans la structure cristalline du carbone. Dans les phases graphitiques (materiaux graphitises et graphitiques), seuls les micropores sont occupes par le sodium Ce resultat explique la tendance observee selon laquelle l'ajout de graphite dans les blocs permet d'abaisser le gonflement sodique. Les mecanismes de penetration du bain dans le reseau poreux des materiaux furent etudies en microscopie electronique et en diffraction des rayons X sur des echantillons apres differents temps d'electrolyses et en variant l'atmosphere (soit sous argon ou sous azote). Ces analyses ont permis d'identifier le mecanisme conduisant a la mouillabilite du bain sur le carbone en fonction de l'atmosphere entourant l'electrolyse. Ainsi, sous azote, la formation de NaCN dans les pores des materiaux par reactions entre le sodium et l'azote permet une mouillabilite accrue du bain alors qu'en absence d'azote (sous argon), le carbure d'aluminium, formes a la surface des pores, joue un role similaire. Dans ce dernier cas, la penetration du bain est moins rapide etant donnee la necessite de toujours amener des especes contenant de l'aluminium en tete du front de

  3. La physique des bulles de champagne Une première approche des processus physico-chimiques liés à l'effervescence des vins de Champagne

    NASA Astrophysics Data System (ADS)

    Liger-Belair, G.

    2002-07-01

    bubbles collapsing at a free surface. But, to the best of our knowledge, and surprising as it may seem, no results concerning the collateral effects on adjoining bubbles of bubbles collapsing in a bubble monolayer have been reported up to now. Actually, effervescence in a glass of champagne ideally lends to a preliminary work with bubbles collapsing in a bubble monolayer. For a few seconds after pouring, the free surface is completely covered with a monolayer composed of quite monodisperse millimetric bubbles collapsing close to each others. We took high-speed photographs of the situation which immediately follows the rupture of a bubble cap in a bubble monolayer. Adjoining bubbles were found to be literally sucked and strongly stretched toward the lowest part of the cavity left by the bursting bubble, leading to unexpected and short-lived flower-shaped structures. Stresses in distorted bubbles (petals of the flower-shaped structure) were evaluated and found to be, at least, one order of magnitude higher than stresses numerically calculated in the boundary layer around an isolated single millimetric collapsing bubble. This is a brand-new and slightly counter-intuitive result. While absorbing the energy released during collapse, as an air-bag would do, adjoining bubble caps store this energy into their thin liquid film, leading finally to stresses much higher than those observed in the boundary layer around single millimetric collapsing bubbles. Further investigation should be conducted now, and especially numerically, in order to better understand the relative influence of each pertinent parameters (bubble size, liquid density and viscosity, effect of surfactant...) on bubble deformation. L'objectif général de cet ouvrage consacré à l'étude des processus physico- chimiques de l'effervescence des vins de Champagne était de décortiquer les différentes étapes de la vie d'une bulle de champagne en conditions réelles de consommation, dans une flûte. Nous r

  4. Guides d'ondes infrarouges pour applications en télécommunications, capteurs chimiques et biochimiques

    NASA Astrophysics Data System (ADS)

    Smektala, F.; Bureau, B.; Adam, J. L.; Lucas, J.

    2002-06-01

    Les énergies de phonons élevés des verres à base de silice limitent leurs applications dans l'infrarouge. Il devient donc incontournable de créer des verres à plus faible énergie de phonons pour développer une optique passive guidée opérationnelle dans l'IR moyen et pour réaliser de nouveaux guide d'ondes optiques activés par des lanthanides pouvant jouer le rôle soit d'amplificateurs optiques soit de fibres lasers. Les compositions de verres stables répondant à ces critères sont exceptionnelles et appartiennent aux familles chimiques des fluorures et des chalcogénures. Les verres de fluorures, convenablement dopés par des terres rares, ont permis la réalisation d'amplificateurs optiques opérant dans la fenêtre télecom de la silice (1.3 μm avec le praséodyme, 1.45 μm avec le thulium et 1.55 μm avec l'erbium. Les verres de chalcogénures permettent la réalisation de fibres opérationnelles jusqu'à 12 μm mais seulement pour des applications courtes distances telles que le transport d'énergie moyenne, la radiométrie à l'ambiante et la spectrométrie IR déportée par fibre optique de molécules chimiques ou de tissus biologiques.

  5. La décorporation des éléments transuraniens selon leur forme chimique et le mode de contamination

    NASA Astrophysics Data System (ADS)

    Ramounet, B.; Matton, S.; Verry, M.; Grillon, G.; Rateau, G.; Poncy, J. L.; Fritsch, P.

    1998-04-01

    We have mesured the efficacy of a local DTPA treatment after intramuscular administration of Np(IV) and Np(V) into rats. A significant decorporation was only observed after contamination with Np(IV) when the chelator was administered within minutes after contamination. We have also performed a chronic DTPA treatment after exposition of rats to MOX aerosols. This treatment decreased the extrapulmonary retention of α emitters by a factor of 3 5. These results point out the need of biokinetics studies concerning the chelators and the actinides to improve the efficacy of decorporation. L'efficacité, d'un traitement local par le DTPA a ,été, mesurée après administration par voie intra-musculaire de Np(IV) et de Np(V) chez le rat. Une décorporation significative n'a ,été, obtenue que pour le Np(IV) lorsque le traitement est réalisé, de façon précoce. Un traitement chronique par le DTPA a ,également ,été, effectué, après inhalation d'oxydes mixtes (U, Pu)O2. Une diminution d'un facteur de 3 à? 5 des rétentions extra-pulmonaires des ,émetteurs α, a ,été, observée. Ces résultats soulignent l'importance de la connaissance de la biocinétique des actinides et des agents chélateurs pour améliorer l'efficacité, de la décorporation.

  6. Modèle mathématique pour l'étude des équilibres physico-chimiques de permanentes.

    PubMed

    Chiodi, F

    1989-12-01

    Résumé La plupart des permanentes du commerce sont constituées d'acide thioglycolique (éventuellement associéà l'acide thiolactique), neutralisé par l'ammoniac, elles sont additionnées de carbonate d'ammonium comme tampon. Le système peut etre traité comme la neutralisation d'un mélange d'acides thioglycolique et carbonique par l'ammoniac, et il est complètement défini par trois paramètres, trois concentrations, ou deux concentrations et le pH, ou trois paramètres analytiques indépendants. Les calculs théoriques de l'équilibre sont compliqués du fait qu'il s'agit de l'équilibre de deux diacides faibles neutralisés par une base faible. Un modèle mathématique développé exclusivement par des équations théoriques permet l'interprétation des équilibres et la réalisation des calculs fiable pour la préparation des formules remplissant certaines caractéristiques. Le modèle permet de réaliser facilement des simulations en faisant varier les concentrations, les acides (par la voie des constantes de dissociation) ou d'associer différents acids et/ou bases organiques ou minérales. Une application complémentaire du modèle est de tracer la courbe dérivée à la courbe de neutralisation et de cette façon mesurer l'effet tampon en différents points par la mesure de sa pente. Synopsis Mathematical model for the study of physico-chemical equilibria in permanent wave solutions Most waving lotions on the market are prepared with thioglycolic acid (eventually associated with thiolactic acid) neutralized with ammonium hydroxide and buffered with ammonium bicarbonate. The system can be treated as the neutralization of a mix of carbonic acid and thioglycolic acid by ammonia and it is completely defined by three parameters: three concentrations; or two concentrations and pH; or three independent analytical parameters. Theoretical calculations of the equilibrium are difficult because the equilibrium involves at least two weak acids with a weak base

  7. Elaboration du Ge mesoporeux et etude de ses proprietes physico-chimiques en vue d'applications photovoltaiques

    NASA Astrophysics Data System (ADS)

    Tutashkonko, Sergii

    Le sujet de cette these porte sur l'elaboration du nouveau nanomateriau par la gravure electrochimique bipolaire (BEE) --- le Ge mesoporeux et sur l'analyse de ses proprietes physico-chimiques en vue de son utilisation dans des applications photovoltaiques. La formation du Ge mesoporeux par gravure electrochimique a ete precedemment rapportee dans la litterature. Cependant, le verrou technologique important des procedes de fabrication existants consistait a obtenir des couches epaisses (superieure a 500 nm) du Ge mesoporeux a la morphologie parfaitement controlee. En effet, la caracterisation physico-chimique des couches minces est beaucoup plus compliquee et le nombre de leurs applications possibles est fortement limite. Nous avons developpe un modele electrochimique qui decrit les mecanismes principaux de formation des pores ce qui nous a permis de realiser des structures epaisses du Ge mesoporeux (jusqu'au 10 mum) ayant la porosite ajustable dans une large gamme de 15% a 60%. En plus, la formation des nanostructures poreuses aux morphologies variables et bien controlees est desormais devenue possible. Enfin, la maitrise de tous ces parametres a ouvert la voie extremement prometteuse vers la realisation des structures poreuses a multi-couches a base de Ge pour des nombreuses applications innovantes et multidisciplinaires grace a la flexibilite technologique actuelle atteinte. En particulier, dans le cadre de cette these, les couches du Ge mesoporeux ont ete optimisees dans le but de realiser le procede de transfert de couches minces d'une cellule solaire a triple jonctions via une couche sacrificielle en Ge poreux. Mots-cles : Germanium meso-poreux, Gravure electrochimique bipolaire, Electrochimie des semi-conducteurs, Report des couches minces, Cellule photovoltaique

  8. Les mécanismes chimiques de la radiostérilisation de médicaments solides

    NASA Astrophysics Data System (ADS)

    Tilquin, B.; Crucq, A.-S.

    1999-01-01

    This paper is devoted to the chemical mechanisms associated with the radiosterilization of solid pharmaceuticals. Microbial tests and potency determinations proved the feasibility of the sterilization process. The literature about the radio-induced chemistry is very poor. Nevertheless, these are essential for the understanding of the process. This article deals with the actual hypotheses and the capability to predict the radio-induced degradation due to the radiosterilization process. Cet article pose la question des mécanismes chimiques associés à la radiostérilisation de principes actifs solides. La faisabilité de ce mode de stérilisation a déjà été démontrée pour plusieurs préparations pharmaceutiques. Après traitement ionisant, le médicament est exempt de microorganismes vivants et son efficacité n'est pas altérée. Peu d'informations sont disponibles sur les mécanismes chimiques radio-induits. Ceux-ci sont néanmoins essentiels pour la compréhension et la maîtrise du procédé. Cet article décrit les hypothèses qui peuvent être actuellement avancées ainsi que la capacité prévisionnelle en phase solide de l'importance des transformations chimiques associées à la radiostérilisation.

  9. Developpement d'une plateforme de calcul d'equilibres chimiques complexes et adaptation aux problemes electrochimiques et d'equilibres contraints

    NASA Astrophysics Data System (ADS)

    Neron, Alex

    Avec l'arrivée de l'environnement comme enjeu mondial, le secteur de l'efficacité énergétique prend une place de plus en plus importante pour les entreprises autant au niveau économique que pour l'image de la compagnie. Par le fait même, le domaine des technologies de l'énergie est un créneau de recherche dont les projets en cours se multiplient. D'ailleurs, un des problèmes qui peut survenir fréquemment dans certaines entreprises est d'aller mesurer la composition des matériaux dans des conditions difficiles d'accès. C'est le cas par exemple de l'électrolyse de l'aluminium qui se réalise à des températures très élevées. Pour pallier à ce problème, il faut créer et valider des modèles mathématiques qui vont calculer la composition et les propriétés à l'équilibre du système chimique. Ainsi, l'objectif global du projet de recherche est de développer un outil de calcul d'équilibres chimiques complexes (plusieurs réactions et plusieurs phases) et l'adapter aux problèmes électrochimiques et d'équilibres contraints. Plus spécifiquement, la plateforme de calcul doit tenir compte de la variation de température due à un gain ou une perte en énergie du système. Elle doit aussi considérer la limitation de l'équilibre due à un taux de réaction et enfin, résoudre les problèmes d'équilibres électrochimiques. Pour y parvenir, les propriétés thermodynamiques telles que l'énergie libre de Gibbs, la fugacité et l'activité sont tout d'abord étudiées pour mieux comprendre les interactions moléculaires qui régissent les équilibres chimiques. Ensuite, un bilan énergétique est inséré à la plateforme de calcul, ce qui permet de calculer la température à laquelle le système est le plus stable en fonction d'une température initiale et d'une quantité d'énergie échangée. Puis, une contrainte cinétique est ajoutée au système afin de calculer les équilibres pseudo-stationnaires en évolution dans le temps. De plus, la

  10. Croissance epitaxiale de GaAs sur substrats de Ge par epitaxie par faisceaux chimiques

    NASA Astrophysics Data System (ADS)

    Belanger, Simon

    La situation energetique et les enjeux environnementaux auxquels la societe est confrontee entrainent un interet grandissant pour la production d'electricite a partir de l'energie solaire. Parmi les technologies actuellement disponibles, la filiere du photovoltaique a concentrateur solaire (CPV pour concentrator photovoltaics) possede un rendement superieur et mi potentiel interessant a condition que ses couts de production soient competitifs. La methode d'epitaxie par faisceaux chimiques (CBE pour chemical beam epitaxy) possede plusieurs caracteristiques qui la rendent interessante pour la production a grande echelle de cellules photovoltaiques a jonctions multiples a base de semi-conducteurs III-V. Ce type de cellule possede la meilleure efficacite atteinte a ce jour et est utilise sur les satellites et les systemes photovoltaiques a concentrateur solaire (CPV) les plus efficaces. Une des principales forces de la technique CBE se trouve dans son potentiel d'efficacite d'utilisation des materiaux source qui est superieur a celui de la technique d'epitaxie qui est couramment utilisee pour la production a grande echelle de ces cellules. Ce memoire de maitrise presente les travaux effectues dans le but d'evaluer le potentiel de la technique CBE pour realiser la croissance de couches de GaAs sur des substrats de Ge. Cette croissance constitue la premiere etape de fabrication de nombreux modeles de cellules solaires a haute performance decrites plus haut. La realisation de ce projet a necessite le developpement d'un procede de preparation de surface pour les substrats de germanium, la realisation de nombreuses sceances de croissance epitaxiale et la caracterisation des materiaux obtenus par microscopie optique, microscopie a force atomique (AFM), diffraction des rayons-X a haute resolution (HRXRD), microscopie electronique a transmission (TEM), photoluminescence a basse temperature (LTPL) et spectrometrie de masse des ions secondaires (SIMS). Les experiences ont permis

  11. Controle de la fabrication des composites par injection sur renforts

    NASA Astrophysics Data System (ADS)

    Lebel, Francois

    Liquid Composite Molding (LCM) is an increasingly used class of processes to manufacture high performance composites. A multiscale study is presented in this thesis in order to better understand the fundamental physics of impregnation and air entrapment phenomena in dual scale fibrous reinforcements and thus propose practical solutions for process control engineers. First of all, an experimental setup is developed to study the saturation of fibrous reinforcements, at the macroscopic scale, during the Resin Transfer Molding (RTM). This setup is used to determine some key parameters of the part filling step and industrial post-filling strategies (mold bleeding and consolidation) that control the impregnation quality of fibrous reinforcements. These key parameters are identified using three series of experiments. These parameters are the flow front velocity, the inlet mold pressure and the bleeding flow rate. The analyses in these three series of experiments are based on an ASTM standard procedure for void content determination in the composite parts by carbonization (also called loss on ignition (LOI)). These three series of experiments have related a posteriori the key parameters of LCM processes to phenomena of void formation, migration and dissolution in composite parts made of E-glass non crimp fabric (NCF) and vinyl ester resin. The second part of this thesis aims to investigate, at the mesoscopic and microscopic scale, the impregnation mechanisms of fibrous reinforcements during LCM processes. This analysis focuses more specifically on wicking phenomenon in fiber tows and in fibrous laminates, namely here stacks of non crimp fabric plies. This experimental study is carried out to better understand the physics which explain that the impregnation velocity is one of the key parameters that control the quality of composite parts manufactured by LCM processes. This analysis also aims to identify the structural features of fiber tows and fibrous reinforcements that

  12. Conception, analyse et caracterisation des proprietes mecaniques de ressorts composites a renfort tresse

    NASA Astrophysics Data System (ADS)

    Zebdi, Oussama

    High performance composites reinforced by woven or braided fabrics have several different applications in various fields such as in the aerospace, automobile and marine industry. This research project was carried out at the Ecole Polytechnique de Montreal in collaboration with an industrial sponsor, the company Composites Atlantic Ltd. Composite springs often represent an interesting alternative, given the reduction in weight that they allow with equal mechanical performance compared to metallic springs. Their good resistance to fatigue and corrosion bring additional benefits in several industrial applications. Moreover, the use of the composites increases safety by avoiding the risks of brutal rupture because of the low propagation velocity of cracks in this type of material. Lastly, in electrotechnics, another significant advantage comes into play because of the electrical insulation capability of composite springs. Few research results can be found on composite springs in the scientific literature. The first part of this thesis studies the problems connected with the design of composite springs. The results are promising, because it was confirmed that composite springs can be devised with the same mechanical performance in term of stiffness as metallic ones. Two solutions were found to replace the metallic springs of the suspension of a four wheel drive: the first spring was in carbon-epoxy, and the second one in glass-epoxy. In the second part, software was developed in order to devise a new approach to predict the mechanical properties of woven or braided composites. This work shows how an inverse method based on plate laminate theory allows creating, from experimental results on braided composites, a virtual basic ply that includes the effect of fiber architecture (undulation and braiding angle). Using this model, the properties of the composite can be predicted for any braid angle. The comparison with the experimental results shows a good correlation with

  13. Introduction à une théorie des systèmes composites : exemples simples de matériaux lamellaires

    NASA Astrophysics Data System (ADS)

    Akjouj, A.; Sylla, B.; Dobrzynski, L.

    This review paper is mostly an introduction to the linear response theory for composite systems. The composite materials are defined here as being formed by different homogeneous parts connected together by interfaces. This type of material can be constructed with the help of homogeneous "bricks" cuted out from infinite materials. This cutting procedures are realized with the help of cleavage operators. The "bricks" are then put together by a coupling operator. This construction manner enables to obtain for any composite system a general equation relating the composite response function (called also Green's function) to the elements of the infinite material response functions and to the cleavage and coupling operators. A general and unified formulation valid as well in matrix algebra as in the algebra of differential equations results from this approach. Any general theory is abstract ; simple examples help very much to understand it. The principal aim of this review paper is the introduction of a general theory for composite systems through simple and analytical examples from the fields of phonons, magnons and electrons in the lamellar composite materials. In order to achieve this goal, the algebra of the examples is as explicit as possible. The references of what was already realized in theory of composite response are discussed also. A prospective and non exhaustive study of all the fields where such a theory can prove to be helpful is given also in this review paper. Cet article de revue est essentiellement une introduction à la théorie de la réponse linéaire dans les systèmes composites. Les matériaux composites sont définis ici comme étant formés de parties homogènes différentes reliées par des interfaces. Ce type de matériaux peut être construit à partir de "briques" homogènes découpées dans des matériaux infinis. Ces opérations de découpage sont effectuées par l'intermédiaire d'opérateurs de clivage. Les "briques" sont ensuite

  14. Etude theorique des fluctuations structurales dans les composes organiques a dimensionnalite reduite

    NASA Astrophysics Data System (ADS)

    Dumoulin, Benoit

    Les systemes a dimensionnalite reduite constituent maintenant une branche entiere de la physique de la matiere condensee. Cette derniere s'est developpee rapidement au cours des dernieres annees, avec la decouverte des materiaux organiques qui presentent, justement, des proprietes physiques fortement anisotropes. Cette these presente une etude en trois parties de plusieurs composes organiques qui, bien que tres differents du point de vue de leurs compositions chimiques et de leurs proprietes physiques a haute temperature, subissent tous une instabilite structurale a tres basse temperature. De plus, dans chacun des cas, l'instabilite structurale est precedee d'un important regime fluctuatif a partir duquel les proprietes physiques changent de maniere significative. Notre etude suit un ordre chronologique inverse puisque nous nous attardons en premier lieu au cas de composes recemment decouverts: les composes de la famille des (BCPTTF)2X (X = PF6 , AsF6). Ces derniers sont des isolants magnetiques a la temperature ambiante et subissent une instabilite structurale de type spin-Peierls a une temperature appelee TSP. En particulier, nous nous interessons a l'etude des proprietes physiques de ces systemes dans le regime fluctuatif, qui precede cette instabilite. Notre etude theorique nous permet de comprendre en detail comment ces systemes s'approchent de l'instabilite struturale. Dans la seconde partie de cette these, nous etudions le regime fluctuatif (pre-transitionnel) observe experimentalement dans le compose de (TMTTF)2PF6. Ce compose organique, dont la structure s'apparente aux sels de Bechgaard, subit une instabilite de type spin-Peierls a une temperature T SP = 19K. Bien que ce compose possede la particularite d'etre un bon conducteur a la temperature ambiante, il subit une transition de type Mott-Hubbard a une temperature Trho ≈ 220K et devient alors un isolant magnetique, analogue aux composes de la famille des (BCPTTF)2X. Le regime fluctuatif precedant l

  15. Caracterisation des proprietes dielectriques de materiaux composites a base de polyethylene terephtalate recycle

    NASA Astrophysics Data System (ADS)

    Mebarki, Fouzia

    The aim of this study is to examine the possibility of using thermoplastic composite materials for electrical applications such as supports of automotive engine ignition systems. We are particularly interested in composites based on recycled polyethylene terephtalate (PET). Conventional isolations like PET cannot meet the new prescriptive requirements. The introduction of reinforcement materials, such as glass fibers and mica can improve the mechanical characteristics of these materials. However, this enhancement may also reduce electrical properties especially since these composites have to be used under severe thermal and electric stresses. In order to estimate PET composite insulation lifetimes, accelerated aging tests were carried out at temperatures ranging from room temperature to 140°C and at a frequency of 300Hz. Studies at high temperature will help to identify the service temperature of candidate materials. Dielectric breakdown tests have been made on a large number of samples according to the standard of dielectric strength tests of solid insulating ASTM D-149. These tests have to identify the problematic samples and to check solid insulation quality. The different knowledge gained from this analysis was used to predict material performance. This will give the company the possibility to improve existing formulations and subsequently develop a material having electrical and thermal properties suitable for this application.

  16. Conception axiomatique des joints hybrides a recouvrement simple en materiaux composites

    NASA Astrophysics Data System (ADS)

    Ouellet, Marc

    Minimizing weight is a primary objective in every system design in the aerospace and automotive industry. Therefore, the use of composite materials has become an integral part of the design of mechanical components. However, in composite structure design, their complexity normally makes it impossible to design them as a single part. This leads to the necessity of using joints. Sadly, these joints introduce discontinuities in the stress distribution within the components and are often the sites of stress concentration. Therefore, they may limit the performance of a structure, in addition to increasing the overall mass significantly due to the use of mechanical fasteners such as bolts and rivets. This is why bonded joints are increasingly popular. They are much lighter than bolted or riveted joints and are often more rigid. Unfortunately, it is very difficult to inspect a bonded joint for defects since the presence of cracks in the adhesive cannot be observed with the naked eye. The main objective of this work is to propose a new design methodology for hybrid joints. To accomplish this, it is necessary to establish reliable analysis tools to improve our understanding of the behavior of these joints when subjected to an external force. A better understanding of the interactions between the parameters is also required. To improve our knowledge on the subject, a literature review was conducted. This review was structured as to emphasize on the behavior of hybrid single lap joints when subjected to an external force in tension. Following this literature review, an analysis of the stress distribution within the joint was carried out using a finite element model. The model and the results were compared with those from two papers in order to validate the quality of representation. Subsequently, a modification was made to an existing analytical model in order to add the bolts' preload as a parameter. These two models, namely the finite element model and the analytical model

  17. Etude des effets du climat nordique sur la duree de vie en fatigue en tension des composites unidirectionnels de fibres de verre et d'epoxy

    NASA Astrophysics Data System (ADS)

    Brassard, David

    Northern regions of Canada present a huge potential for wind energy production. Unfortunately, it introduces new challenges regarding the operating conditions. This thesis presents a study on the effects of northern climate on the fatigue life of unidirectional glass fibre/epoxy composites. Following a review of previous researches in that field, we provide the results of the present study. Under controlled experimental conditions, we examined the individual and combined effects of low temperatures, moisture content, and freeze-thaw cycles on the fatigue life under tension load of composites. These results were compared to dry and room temperature conditions that served as a baseline. Statistical analysis suggests that thermal cycles between 40 °C and -40 °C do not affect the average fatigue life of unidirectional composites. Freeze-thaw cycles detrimentally affects the interface observed after failure of the specimens. At high stresses, moisture content decreases fatigue life while at low stresses, moisture content increases fatigue life probably due to an increase in ductility of the epoxy matrix. Low temperature did not affect the fatigue life of dry samples, but increased the fatigue life of specimens for moisture conditioned samples. In dry conditions, Northern climates do not negatively affect the fatigue life of unidirectional composites. Freeze-thaw cycles also did not affect fatigue life of unidirectionnal composites. Future research should test its effect on the interface in multidirectional composites.

  18. De la caracterisation des materiaux et simulation du procede a l'optimisation de la fabrication des composites par injection sur renfort

    NASA Astrophysics Data System (ADS)

    Ruiz, Eduardo

    The Liquid Composite Molding techniques (LCM) have become widely used composite manufacturing methods for medium to small production volumes. The objectives of this thesis consist of developing characteristic equations that describe the thermo-mechanical behaviour and phase changes of thermosetting matrix composites, create and implement new numerical models for process simulation and finally, propose a new and comprehensive optimization methodology based on genetic algorithms for the curing and cooling of LCM parts. In these processes, the fibrous reinforcement is progressively saturated by the liquid resin. Once the mold cavity is filled, the thermosetting resin polymerizes and solidifies. From the point of view of the numerical simulation, the process can be divided into three principal stages: (1) filling, (2) curing and (3) cooling and demolding. The material characterisation, numerical simulation and optimization of these three stages are included in the scope of works of this thesis. The first part of this study concerns the characterization of the cure kinetics and the viscoelastic behaviour of a glass/polyester composite. A semi-empirical model was developed to take into account the effects of inhibitor decomposition and glass transition on cure kinetics. Two models are proposed to describe the chemical and thermal effects on the mechanical properties of the composite. The first one is a thermo-chemical elastic non-linear model that considers total matrix relaxation in the rubbery state above the glass transition temperature. The second one is a viscoelastic model based on the stress relaxation and the time/temperature superposition principle. A one-dimensional solution of the heat equation coupled with stress analysis has been developed to simulate thermal, chemical and mechanical effects during cure. The calculation of residual stresses and the elastic model have been experimentally verified by molding thin composite plates. A study has been carried out

  19. Materiaux composites supraconducteurs

    NASA Astrophysics Data System (ADS)

    Kerjouan, Philippe; Boterel, Florence; Lostec, Jean; Bertot, Jean-Paul; Haussonne, Jean-Marie

    1991-11-01

    The new superconductor materials with a high critical current own a large importance as well in the electronic components or in the electrotechnical devices fields. The deposit of such materials with the thick films technology is to be more and more developped in the years to come. Therefore, we tried to realize such thick films screen printed on alumina, and composed mainly of the YBa2CU3O{7-δ} material. We first realized a composite material glass/YBa2CU3O{7-δ}, by analogy with the classical screen-printed inks where the glass ensures the bonding with the substrate. We thus realized different materials by using some different classes of glass. These materials owned a superconducting transition close to the one of the pure YBa2CU3O{7-δ} material. We made a slurry with the most significant composite materials and binders, and screen-printed them on an alumina substrate preliminary or not coated with a diffusion barrier layer. After firing, we studied the thick films adhesion, the alumina/glass/composite material interfaces, and their superconducting properties. Les nouveaux matériaux supraconducteurs à haute température critique ont potentiellement un rôle important à jouer dans le domaine de l'électronique et de l'électrotechnique. En particulier, le dépôt d'oxydes supraconducteurs sur divers types de substrats est une technologie amenée à se développer. Nous avons donc entrepris une étude dont l'objet est la réalisation de conducteurs sérigraphiés sur alumine et composés essentiellement du matériau YBa2CU3O{7-δ}. Nous avons tout d'abord cherché à réaliser un composite verre/YBa2CU3O{7-δ}, par analogie au principe de réalisation de couches conductrices sérigraphiées, le verre permettant d'obtenir une liaison physico-chimique avec le substrat. Une étude préliminaire a permis de réaliser divers matériaux composites massifs, utilisant différentes familles de verres. Ces matériaux massifs, se présentant sous la forme de barreaux de

  20. Copolymères (carbazolylène-pyrrolylène) : synthèse par oxydation chimique et propriétés

    NASA Astrophysics Data System (ADS)

    Boucard, V.; Adès, D.; Siove, A.

    1998-06-01

    Conditions in which (carbazolylene-pyrrolylene) random copolymers could be synthetized directly by chemical oxidation by FeCl3 were studied. A substantial amount of soluble copolymers is obtained after work-up in the conditions corresponding to carbazole/pyrrole/2 FeCl3 molar proportions. An important fraction of polypyrrole was obtained beside a fraction of species soluble in ethanol (carbazole and dimer) and an other fraction of products soluble in water (pyrrole accompanied by the first terms of the oligomeric series). Soluble copolymers were characterized by means of SEC, NMR and UV-Visible spectroscopies. Cyclic voltammetry analysis disclosed that these copolymers exhibit both the carbazolic and the pyrrolic features. Les conditions dans lesquelles des copolymères statistiques (carbazo lylène-pyrrolylène) pouvaient être synthétisés directement par oxydation chimique par FeCl3 ont été étudiées. Des quantités substantielles de copolymères solubles en milieu organique sont obtenues par extraction lorsque les proportions molaires en réactifs carbazole/pyrrole/2 FeCl3 sont utilisées. Une fraction importante de polypyrrole est obtenue à côté d'une fraction d'espèces solubles dans l'éthanol (carbazole et son dimère) et d'une fraction de produits solubles dans l'eau (pyrrole et les premiers termes oligomères). Les copolymères solubles ont été caractérisés par CES, spectroscopies RMN et UV-Visible. L'analyse voltampérométrique de ces matériaux révèle qu'ils possèdent à la fois les caractéristiques des entités carbazolylènes et celles des entités pyrrolylènes.

  1. Comparisons of PBDE composition and concentration in fish collected from the Detroit River, MI and Des Plaines River, IL

    USGS Publications Warehouse

    Rice, C.P.; Chernyak, S.M.; Begnoche, L.; Quintal, R.; Hickey, J.

    2002-01-01

    Polybrominated diphenyl ethers (PBDEs) were identified in fish collected from the Detroit River, MI and Des Plaines Rivers, IL. In the Detroit River fish, carp and large mouth bass, the congener patterns were dominated by the 2,2′,4,4′-tetrabromo (BDE-47) congener; however, in Des Plaines River carp the dominant isomers were the heptabromo congeners BDE-181 and BDE-183 and lesser amounts of another heptabromo congener, BDE-190, and two hexabromo congeners, BDE-154 and BDE-153. Three possible sources exist for these less-commonly identified PBDE congeners: (a) waste discharge from manufacturing or discarded products near the river, (b) public owned treatment work (POTW) effluents which constitute more than 75% of the flow in the Des Plaines River, (c) or formation of these congeners by debromination of in-place deposits of decabromodiphenyl ether. Average concentration totals (sum of concentrations for seven of the dominant PBDE congeners) were similar on a wet weight bases for the carp (5.39 ng/g wet weight) and large mouth bass (5.25 ng/g) in the Detroit River samples; however, the bass were significantly higher, ρ=0.01, when compared on a lipid basis (bass-163 ng/g vs. carp-40.5 ng/g lipid weight). Some of the PBDE congeners were positively correlated with increasing lipid levels in both fish species. Average total PBDE concentrations in the carp from the Des Plaines River (12.48 ng/g wet weight) were significantly higher, ρ=0.01, than in carp from the Detroit River. The residues were isolated using standard organochlorine methods for fish and analyzed using gas chromatography/mass spectrometry-negative chemical ionization methods.

  2. Des Moines.

    ERIC Educational Resources Information Center

    Gore, Deborah, Ed.

    1988-01-01

    This document, intended for elementary students, contains articles and activities designed to acquaint young people with the history of Des Moines, Iowa. The articles are short, and new or difficult words are highlighted and defined for young readers. "The Raccoon River Indian Agency" discusses the archeological exploration of the indian…

  3. Composition.

    ERIC Educational Resources Information Center

    Nemanich, Donald, Ed.

    1974-01-01

    The articles in this special issue of the "Illinois English Bulletin" concern the state of composition instruction at the secondary and college levels. The titles and authors are "Monologues or Dialogues? A Plea for Literacy" by Dr. Alfred J. Lindsey, "Teaching Composition: Curiouser and Curiouser" by Denny Brandon, and "Teaching Writing to High…

  4. Composites

    SciTech Connect

    Chou, T.; McCullough, R.L.; Pipes, R.B.

    1986-10-01

    The degree of control over material properties that is typified by hybrid composites is transforming engineering design. In part because homogeneous materials such as metals and alloys do not offer comparable control, specifying a material and designing a component have traditionally taken place separately. As composites begin to replace traditional materials in fields and such as aerospace, component design and the specification of a material are merging and becoming aspects of a single process. The controllable microstructure of a composite allows it to be tailored to match the distribution of stresses to which it will be subject. At the same time components must come to reflect the distinctive nature of composites: their directional properties and the intricate forms they can be given through processes such as injection molding, filament winding and three-dimensional weaving. The complexity inherent in conceiving components and their materials at the same time suggests engineering design will grow increasingly dependent on computers and multidisciplinary teams. Such an approach will harness the full potential of composites for the technologies of the future. 10 figures.

  5. Formation et Evolution des Structures dans le Milieu interstellaire. Une Approche théorique, numérique et observationnelle

    NASA Astrophysics Data System (ADS)

    Hennebelle, Patrick

    2000-11-01

    Le milieu interstellaire, au sein duquel se forme les étoiles,présente d'importants contrastes de densités. Ces structures se forment sous l'action couplée de processus magnétohydrodynamiques, thermiques et chimiques. La première partie de cette thèse est un travail théorique et numérique sur la condensation induite dynamiquement de gaz chaud et diffus en une phase froide et condensée. Nous montrons, tout d'aborddans le cas hydrodynamique, puis MHD, comment, dans un milieu thermiquement bistable, une fluctuation de vitesse typiquement transonique conduit, si elle est d'amplitude suffisante et dure un temps assez long, à la formationd'une structure stable. L'influence de divers paramètres -amplitude et échelle spatiale caractéristique de la perturbation, pression initiale, configuration du champ magnétique- sur la condensationest étudiée numériquement et analytiquement. Des spectres synthétiques sont calculés et qualitativement comparés aux spectres observationnels. La seconde partie de la thèse porte sur l'étudeobservationnelle des phases les plus condensées du milieu interstellaire détectées en absorption sur le fond infrarouge galactique par le satellite ISO. Nous effectuons tout d'abordune extraction systématique de ces objets à partir d'une analyse multi-échelle des données ISOGAL.L'étude du rapport des contrastes à 7 et 15 um permet de mesurer le rapport de l'extinction interstellaire, peu connue dans cette région du spectre, à ces deux longueurs d'onde. Des estimations d'opacité de quelques objets sont égalementdéduites des données en infrarouge. Des observations complémentaires spectroscopiques et bolométriques dans le domaineradio ont été effectuées et permettent une analyse plus détaillée des paramètres physico-chimiques de ces nuages.

  6. Composites

    NASA Astrophysics Data System (ADS)

    Taylor, John G.

    The Composites market is arguably the most challenging and profitable market for phenolic resins aside from electronics. The variety of products and processes encountered creates the challenges, and the demand for high performance in critical operations brings value. Phenolic composite materials are rendered into a wide range of components to supply a diverse and fragmented commercial base that includes customers in aerospace (Space Shuttle), aircraft (interiors and brakes), mass transit (interiors), defense (blast protection), marine, mine ducting, off-shore (ducts and grating) and infrastructure (architectural) to name a few. For example, phenolic resin is a critical adhesive in the manufacture of honeycomb sandwich panels. Various solvent and water based resins are described along with resin characteristics and the role of metal ions for enhanced thermal stability of the resin used to coat the honeycomb. Featured new developments include pultrusion of phenolic grating, success in RTM/VARTM fabricated parts, new ballistic developments for military vehicles and high char yield carbon-carbon composites along with many others. Additionally, global regional market resin volumes and sales are presented and compared with other thermosetting resin systems.

  7. Influence d'une substitution partielle du ciment par du laitier de hauts fourneaux sur la résistance des mortiers en milieu acide

    NASA Astrophysics Data System (ADS)

    Achoura, D.; Lanos, Ch.; Jauberthie, R.; Redjel, B.

    2004-11-01

    Le stockage de produits chimiques dans du béton présente souvent des problèmes de durabilité dus aux attaques chimiques. Inévitablement les concentrations élevées sont les plus dangereuses. Le but de notre étude est de déterminer les changements de phases qui apparaissent dans le béton lorsqu'on substitue une partie du ciment par du laitier de haut fourneaux. Les échantillons sont conservés dans des solutions acides différents anions (HCl, H{2}SO{4}, H{3}PO{4} et CH{3}COOH) et différentes concentrations (0,1; 0,25 et 0,5M). Les formations qui apparaissent sont déterminées par diffraction X et observées au MEB. Les solutions sulfatiques conduisent à une formation de gypse en surface et d'ettringite au contact de la matrice cimentaire. Avec l'acide acétique, il y a formation de calcium acétate hydrate sous forme spongieuse tandis que, avec l'acide phosphatique, la formation de calcium hydrogeno phosphate hydrate est très superficielle. Enfin, avec l'acide chlorhydrique, la surface du mortier est recouverte de chlorure de calcium dihydrate et d'hydroxyde de fer. Les résistances mécaniques sont plus ou moins affectées par la concentration mais aussi et surtout par la nature des acides avec dans l'ordre le plus agressif H{2}SO{4} puis HCl et CH{3}COOH enfin peu de modification pour H{3}PO{4}.

  8. Composites

    NASA Astrophysics Data System (ADS)

    Chmielewski, M.; Nosewicz, S.; Pietrzak, K.; Rojek, J.; Strojny-Nędza, A.; Mackiewicz, S.; Dutkiewicz, J.

    2014-11-01

    It is commonly known that the properties of sintered materials are strongly related to technological conditions of the densification process. This paper shows the sintering behavior of a NiAl-Al2O3 composite, and its individual components sintered separately. Each kind of material was processed via the powder metallurgy route (hot pressing). The progress of sintering at different stages of the process was tested. Changes in the microstructure were examined using scanning and transmission electron microscopy. Metal-ceramics interface was clean and no additional phases were detected. Correlation between the microstructure, density, and mechanical properties of the sintered materials was analyzed. The values of elastic constants of NiAl/Al2O3 were close to intermetallic ones due to the volume content of the NiAl phase particularly at low densities, where small alumina particles had no impact on the composite's stiffness. The influence of the external pressure of 30 MPa seemed crucial for obtaining satisfactory stiffness for three kinds of the studied materials which were characterized by a high dense microstructure with a low number of isolated spherical pores.

  9. Caracterisation du composite titanium diboride-carbone avec l'aluminium liquide et le bain cryolithique des cuves d'electrolyse de l'aluminium

    NASA Astrophysics Data System (ADS)

    Dionne, Martin

    It is the aluminum industry which is most interested in titanium diboride (TiB2) and TiB2-carbon composites (TCC). The interesting properties of TiB2 were recognized as early as the 50s. In this study, both raw materials (anthracite, pitch and TiB2 powder) and TiB2-carbon composite were characterized. Results on a comparative microscopic evaluation between TiB2-carbon composites and conventional anthracite-based carbon cathode samples after laboratory immersion and electrolysis tests are presented. Inclusions of alumino-silicate and iron oxide types were found in the anthracite aggregates. XRD analysis allowed to differentiate between two types of aggregates: stratified (Lc = 44 nm) and non-stratified (L c = 15 nm). The principal impurity found in the TiB2 powder was TiCN and surface analysis of the particles revealed the presence of a contaminant layer composed of C, N, O and Ti; the thickness of this layer varied from 5 nm to 15 nm. Although pure molten aluminum wets TiB2 after a latent period and penetrates the composite to a depth of about 100 to 200 mum, the TiB 2 shows no evidence of dissolution. Liquid aluminum, in direct contact with carbon, reacts readily to form Al4C3; the carbon from baked pitch is more reactive than the coarser anthracite particles. Molten bath dissolved TiB2 grains preferentially along specific atomic planes. The extent of liquid bath penetration is very low for the anthracite carbon cathode, compared to the composite material which is completely impregnated within minutes. In the case of the composite, a ≈500 mum thick coherent layer of TiB2/Al4C3 composite is formed, the carbon being almost completely reacted in this zone. Following the electrolysis tests, a film of electrolyte containing aluminum nodules and filaments covers the surface of the conventional carbon cathode. In the case of the TiB2-carbon composite, a continuous film of aluminum metal is observed, wetting the surface of the sample. The penetrating aluminum reacts

  10. La physique des bulles de champagne Une première approche des processus physico-chimiques liés à l'effervescence des vins de Champagne

    NASA Astrophysics Data System (ADS)

    Liger-Belair, G.

    2002-07-01

    People have long been fascinated by bubbles and foams dynamics, and since the pioneering work of Leonardo da Vinci in the early 16th century, this subject has generated a huge bibliography. However, only very recently, much interest was devoted to bubbles in Champagne wines. Small bubbles rising through the liquid, as well as a bubble ring (the so-called collar) at the periphery of a flute poured with champagne are the hallmark of this traditionally festive wine, and even there is no scientific evidence yet to connect the quality of a champagne with its effervescence, people nevertheless often make a connection between them. Therefore, since the last few years, a better understanding of the numerous parameters involved in the bubbling process has become an important stake in the champagne research area. Otherwise, in addition to these strictly enological reasons, we also feel that the area of bubble dynamics could benefit from the simple but close observation of a glass poured with champagne. In this study, our first results concerning the close observation of the three main steps of a champagne bubble's life are presented, that is, the bubble nucleation on tiny particles stuck on the glass wall (Chap. 2), the bubble ascent through the liquid (Chap. 3), and the bursting of bubbles at the free surface, which constitutes the most intriguing and visually appealing step (Chap. 4). Our results were obtained in real consuming conditions, that is, in a classical crystal flute poured with a standard commercial champagne wine. Champagne bubble nucleation proved to be a fantastic everyday example to illustrate the non-classical heterogeneous bubble nucleation process in a weakly supersaturated liquid. Contrary to a generally accepted idea, nucleation sites are not located on irregularities of the glass itself. Most of nucleation sites are located on tiny hollow and roughly cylindrical exogenous fibres coming from the surrounding air or remaining from the wiping process. Because of their geometry and hydrophobic properties, such particles are able to entrap gas pockets during the filling of a flute and to start up the bubble production process. Such particles are responsible for the clockwork and repetitive production of bubbles that rise in-line into the form of elegant bubble trains. This cycle of bubble production at a given nucleation site is characterised by its bubbling frequency. The time needed to reach the moment of bubble detachment depends on the kinetics of the CO2 molecules transfer from the champagne to the gas pocket, but also on the geometrical properties of the given nucleation site. Now, since a collection of particle shapes and sizes exists on the glass wall, the bubbling frequency may also vary from one site to another. Three minutes after pouring, we measured bubbling frequencies ranging from less than 1 Hz up to almost 30 Hz, which means that the most active nucleation sites emit up to 30 bubbles per second. After their detachment from nucleation sites, champagne bubbles rise in-line through the liquid into the form of elegant bubble trains. Since they collect dissolved carbon dioxide molecules, champagne bubbles expand during ascent and therefore constitute an original tool to investigate the dynamics of rising and expanding bubbles. Hydrodynamically speaking, champagne bubbles were found to reach a quasi-stationary stage intermediate between that of a rigid and that a fluid sphere (but nevertheless closer to that of a fluid sphere). This result drastically differs from the result classically observed with bubbles of fixed radii rising in surfactant solutions. Since surfactants progressively adsorb at the bubble surface during the rise, the drag coefficient of a rising bubble of fixed radius progressively increases, and finally reaches the rigid sphere limit when the bubble interface gets completely contaminated. In the case of champagne, since a bubble expands during its rise through the supersaturated liquid, the bubble interface continuously increases and therefore continuously offers newly created surface

  11. Etude comparative sur la propagation de l'endommagement apres impact des composites carbone/epoxy renforces par piquage au fil Kevlar et titane-nickel

    NASA Astrophysics Data System (ADS)

    Vachon, Pierre-Luc

    Composite laminates have strong in-plane mechanical properties, but they are generally weaker through their thickness. This specificity makes the laminates prone to delamination, particularly under low-velocity impact loads. Consequently numerous research efforts have been dedicated to developing interlaminar reinforcing methods, such as transverse stitching. The present project proposes the use of the stitching technique combined with a special stitching thread made of superelastic TiNi alloy. This technology is intended to improve the delamination toughness in composite laminates loaded in bending. In the first part of this study a numerical model was developed for analyzing composite structures. The 3-D finite element model was built with the ANSYS commercial software using 20-node solid and 8-node shell elements. The progressive damage modeling technique was used, allowing the prediction of delamination propagation in a laminate submitted to various loading modes. The model was validated for a plate under quasi-static traction load, and it was then used to simulate three-point bending tests. Secondly, carbon/epoxy composite panels were fabricated, with each panel containing unstitched and stitched specimens. Two different materials were used for the stitching thread: superelastic TiNi wires and Kevlar threads as a reference. Some stitched specimens were cut in slices in order to make some observations of the internal stitch using an optical microscope. Standardized low-velocity impact tests and compression after impact tests were carried out on stitched and unstitched specimens (ASTM D7136 and D7137). The Kevlar reinforcements have shown great performance in reducing the delaminated zone after impact, as well as in improving the residual compression strength. The TiNi reinforcements provided encouraging results during the impact tests, though being less effective than the Kevlar threads. During the compression after impact tests, only a slight difference could

  12. Réactions chimiques et courant de transport dans la phase Bi2223

    NASA Astrophysics Data System (ADS)

    Duperray, G.; Legat, D.; Savary, H.

    1994-11-01

    performances supraconductrices à la microstructure : détermination, concentration et répartition des phases parasites, cristallinité, orientation et compacité de la phase Bi2223. Nous avons ainsi essayé de suivre les interactions entre les phases " réfractaires " : (Ca, Sr)2CuO3 ; (Ca, Sr)CuO2 CuO et la phase fusible : Bi2212 riche en Bi et Sr + (Ca, Sr)2PbO4 et de déterminer les paramètres favorisant la recombinaison en Bi2223 pure et bien cristallisée. Les valeurs de densité de courant critique de transport à 77 K sous 0 T sont de 11 A/mm^2 pour une poudre commerciale et de 17 A/mm^2 (47 A) pour une poudre de type " laboratoire ", alors qu'elles sont de 50 A/mm^2 pour les multifilamentaires correspondants.

  13. Optimisation structurale de dalles de chaussees en beton jointees avec des goujons en materiaux composites en Polymeres Renforces de Fibres de Verre (PRFV)

    NASA Astrophysics Data System (ADS)

    Bricola, Julien

    In Quebec, the majority of the road network was built in the 60's - 70's and show obvious signs of ageing. Moreover, the increase of road traffic and the rigorous weather conditions, render the maintenance and the exploitation of roads in this Northern American part quite difficult. Indeed, these environmental conditions cause severe damages for roads, especially in winter. The degradation factor of the jointed rigid pavement is intensified by the highway salt. So, the phenomena of deteriorations appears mainly by the corrosion of the steel at the joints (structural elements) guaranteeing the durability of roads. The jointed rigid pavements or "short jointed pavements" are still mainly sized with steel dowels placed at the lining of joints. One of the main functions of these structures is to control the formation of cracking due to the thermal and environmental conditions. In order to reduce these , disorders, the Ministry of Transport of Quebec (MTQ) turned towards new techniques and innovative materials to ensure the longevity of roads. With the rapid evolution of specific methods and knowledge in roads design, joined with technologies and new products, the MTQ emphasizes the research and development. That way, advanced techniques and diverse technologies in the Quebecois context are settled. As a matter of fact, one of the axes of these development researches concerns the composite materials which have recently been given good results in the civil engineering area. That is why Glass Fibre-Reinforced Polymer (GFRP) dowels bars appear as a solution to the steel corrosion. In fact, they provide better durability with lower costs: the increase of service life as well as the decrease of maintenance persons and traffics impac. Thus, this project proposes an optimization of structural design of GFRP dowels for transverse jointed highway pavement slabs, also keeping in mind their use in new projects. The GFRP dowels which are given in this essay are made by the Pultrall

  14. Des ballons pour demain

    NASA Astrophysics Data System (ADS)

    Régipa, R.

    A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

  15. Amputation des quatre membres

    PubMed Central

    Feruzi, Maruis Kitembo; Milindi, Cédrick Sangwa; Zabibu, Mireille Kakinga; Mulefu, Jules Panda; Katombe, Francois Tshilombo

    2014-01-01

    Les auteurs présentent les cas d'amputation des quatre membres réalisée chez trois patients différents. Ce sont des amputations réalisées pour chaque patient au cours d'une seule hospitalisation et en un seul temps opératoire. Deux patients pour gangrène sèche infectée et un pour amputation traumatique des quatre membres. L'amputation d'urgence a été pratiquée en premier temps suivie de remodelage des moignons d'amputation en second temps. L’évolution de tous les patients a été bonne. PMID:25469177

  16. Identification des risques professionnels dans l'industrie textile en République Démocratique du Congo

    PubMed Central

    Kitronza, Panda Lukongo

    2014-01-01

    Introduction Le but de cette étude est de mettre en évidence les facteurs de risques professionnels liés aux conditions de travail. Méthodes Cette étude qualitative basée sur les entretiens de groupe a été réalisée par une équipe pluridisciplinaire dans l'industrie textile de la région du Est de la RDC; comprenant un médecin de travail, un médecin de santé publique, un toxicologue, deux infirmiers du centre hospitalier de l'usine, un représentant du comité d'hygiène et un technicien de prévention. La démarche méthodologique a consisté en des entretiens en groupe, des observations et visites guidées de lieux de travail de l'entreprise. Résultats Dans la culture du coton, les effets d'une forte exposition aux pesticides peuvent entraîner des intoxications aiguës, chroniques et voire le décès. Les autres risques sont les accidents de travail, les maladies professionnelles, les troubles psychologiques. Dans l'industrie, les travailleurs sont exposés aux risques liés à l'empoussiérage des fibres de coton, aux facteurs des risques traumatiques, physiques (bruits, vibration) et chimiques (acides forts, bases fortes, solvants et colorants minéraux), ainsi qu'aux risques psychosociaux. La pollution de l'environnement et l’écotoxicité inhérente à ces activités restent l'effet de l'usage des grandes quantités d'intrants agricoles, engrais et produits phytosanitaires. Conclusion Cette étude a permis de mettre en évidence les différents facteurs de risques auxquelles sont soumis les travailleurs textiles; ainsi que les risques environnementaux liés à cette activité. Cela est de nature à permettre la mise sur pied d'une stratégie efficace de prévention et de protection des travailleurs. PMID:25977736

  17. Apprendre en sciences, c'est apprendre a "parler sciences": des eleves de l'immersion nous parlent des reactions chimiques (Learning in Science Means Learning To "Talk Science": Immersion Students Talk to Us About Chemical Reactions).

    ERIC Educational Resources Information Center

    LaPlante, Bernard

    2000-01-01

    Reports on a study of Grade 6 students in two French immersion classrooms who learned how to talk about chemical reactions. Results show that these students were able to improve how they "talk science" by appropriating certain characteristics of scientific discourse. (Author/VWL)

  18. Des Vents et des Jets Astrophysiques

    NASA Astrophysics Data System (ADS)

    Sauty, C.

    well expected result from the theory. Although, collimation may be conical, paraboloidal or cylindrical (Part 4), cylindrical collimation is the more likely to occur. The shape of outflows may then be used as a tool to predict physical conditions on the flows or on their source. L'éjection continue de plasma autour d'objets massifs est un phénomène largement répandu en astrophysique, que ce soit sous la forme du vent solaire, de vents stellaires, de jets d'étoiles en formation, de jets stellaires autour d'objets compacts ou de jets extra-galactiques. Cette zoologie diversifiée fait pourtant l'objet d'un commun effort de modélisation. Le but de cette revue est d'abord de présenter qualitativement le développement, depuis leur origine, des diverses théories de vents (Partie 1) et l'inter disciplinarité dans ce domaine. Il s'agit d'une énumération, plus ou moins exhaustive, des idées proposées pour expliquer l'accélération et la morphologie des vents et des jets, accompagnée d'une présentation sommaire des aspects observationnels. Cette partie s'abstient de tout aspect faisant appel au formalisme mathématique. Ces écoulements peuvent être décrits, au moins partiellement, en résolvant les équations magnétohydrodynamiques, axisymétriques et stationnaires. Ce formalisme, à la base de la plupart des théories, est exposé dans la Partie 2. Il permet d'introduire quantitativement les intégrales premières qu'un tel système possède. Ces dernières sont amenées à jouer un rôle important dans la compréhension des phénomènes d'accélération ou de collimation, en particulier le taux de perte de masse, le taux de perte de moment angulaire ou l'énergie du rotateur magnétique. La difficulté de modélisation réside dans l'existence de points critiques, propres aux équations non linéaires, qu'il faut franchir. La nature physique et la localisation de ces points critiques fait l'objet d'un débat important car ils sont la clef de voute de la r

  19. Reticulation des fibres lignocellulosiques

    NASA Astrophysics Data System (ADS)

    Landrevy, Christel

    Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

  20. Qualité des eaux de la station de traitement de la ville de Skikda, Algérie Essais d'optimisation de la clarification

    NASA Astrophysics Data System (ADS)

    Meghzili, B.; Medjram, M. S.; Achour, S.

    2005-05-01

    A cause de la sécheresse qui a sévit durant une décennie, la station de traitement de l'eau potable de la ville de Skikda Algérie, en vue de combler le déficit en eau, utilise un mélange des eaux de surface (barrage) et des eaux souterraines (forage). Les résultats des analyses physico-chimiques de ces eaux montrent la présence de micropolluants, notamment le mercure, avec une concentration de 0.035 mg/l pour les eaux de surface et une concentration de 0.02 mg/l pour les eaux souterraines. Ces résultats obtenus, montrent également que la concentration en matières organiques dépasse, pour les deux sources, les normes OMS. Afin de réduire les effets de cette pollution, nous avons calculé les doses nécessaires des différents réactifs utilisés sur la base des essais d'optimisation réalisés en laboratoire. Les résultats obtenus nous ont permis de conclure que les doses de 30 à 60 mg/l de sulfate d'aluminium (S.A) sont nécessaires à une bonne élimination de la turbidité et des matières organiques (M.O) et que l'utilisation du charbon active en poudre (C.A.P) permet la réduction de la teneur en mercure au dessous du seuil admissible. L'utilisation d'un adjuvant (chaux vive) permet d'améliorer les résultats surtout pour la turbidité (4 mg/l). Une préchloration au break point semble intéressante pour améliorer la phase de floculation.

  1. Médecine des voyages

    PubMed Central

    Aw, Brian; Boraston, Suni; Botten, David; Cherniwchan, Darin; Fazal, Hyder; Kelton, Timothy; Libman, Michael; Saldanha, Colin; Scappatura, Philip; Stowe, Brian

    2014-01-01

    Résumé Objectif Définir la pratique de la médecine des voyages, présenter les éléments fondamentaux d’une consultation complète préalable aux voyages à des voyageurs internationaux et aider à identifier les patients qu’il vaudrait mieux envoyer en consultation auprès de professionnels de la médecine des voyages. Sources des données Les lignes directrices et les recommandations sur la médecine des voyages et les maladies liées aux voyages publiées par les autorités sanitaires nationales et internationales ont fait l’objet d’un examen. Une recension des ouvrages connexes dans MEDLINE et EMBASE a aussi été effectuée. Message principal La médecine des voyages est une spécialité très dynamique qui se concentre sur les soins préventifs avant un voyage. Une évaluation exhaustive du risque pour chaque voyageur est essentielle pour mesurer avec exactitude les risques particuliers au voyageur, à son itinéraire et à sa destination et pour offrir des conseils sur les interventions les plus appropriées en gestion du risque afin de promouvoir la santé et prévenir les problèmes médicaux indésirables durant le voyage. Des vaccins peuvent aussi être nécessaires et doivent être personnalisés en fonction des antécédents d’immunisation du voyageur, de son itinéraire et du temps qu’il reste avant son départ. Conclusion La santé et la sécurité d’un voyageur dépendent du degré d’expertise du médecin qui offre le counseling préalable à son voyage et les vaccins, au besoin. On recommande à ceux qui donnent des conseils aux voyageurs d’être conscients de l’ampleur de cette responsabilité et de demander si possible une consultation auprès de professionnels de la médecine des voyages pour tous les voyageurs à risque élevé.

  2. Towards a Dynamic DES model

    NASA Astrophysics Data System (ADS)

    Subbareddy, Pramod; Candler, Graham

    2009-11-01

    Hybrid RANS/LES methods are being increasingly used for turbulent flow simulations in complex geometries. Spalart's detached eddy simulation (DES) model is one of the more popular ones. We are interested in examining the behavior of the Spalart-Allmaras (S-A) Detached Eddy Simulation (DES) model in its ``LES mode.'' The role of the near-wall functions present in the equations is analyzed and an explicit analogy between the S-A and a one-equation LES model based on the sub-grid kinetic energy is presented. A dynamic version of the S-A DES model is proposed based on this connection. Validation studies and results from DES and LES applications will be presented and the effect of the proposed modification will be discussed.

  3. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    NASA Astrophysics Data System (ADS)

    Benoit, Louis

    En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q<= m+1. L'entier m parametrise la charge centrale: c(m)=1 -{6over m(m+1)} avec n>= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations

  4. Lignes directrices sur l’aiguillage des cas soupçonnés de cancer colorectal par un médecin de famille ou autre professionnel des soins primaires

    PubMed Central

    Del Giudice, M. Elisabeth; Vella, Emily T.; Hey, Amanda; Simunovic, Marko; Harris, William; Levitt, Cheryl

    2014-01-01

    Résumé Objectif Ces lignes directrices ont pour but d’aider les médecins de famille et les autres professionnels des soins primaires à reconnaître les caractéristiques qui devraient susciter leurs soupçons quant à la présence d’un cancer colorectal (CCR) chez leurs patients. Composition du comité Les membres du comité ont été choisis parmi les dirigeants régionaux des soins primaires au sein du Réseau provincial des soins primaires et de la lutte contre le cancer, les membres du Comité consultatif sur le dépistage du cancer colorectal de l’Ontario et les membres du Groupe sur le siège de la maladie, Cancer gastrointestinal, d’Action Cancer Ontario. Méthodes Ces lignes directrices sont le fruit d’une revue systématique et d’une synthèse des données probantes, ainsi que d’un examen formel par des intervenants canadiens pour valider la pertinence des recommandations. Rapport Des lignes directrices fondées sur des données probantes ont été élaborées pour améliorer la prise en charge des patients qui présentent des caractéristiques cliniques d’un CCR et ce, dans le contexte canadien. Conclusion Un équilibre judicieux entre une suspicion de CCR et le niveau de risque d’un tel cancer devrait favoriser une demande de consultation en temps opportun par les médecins de famille et les professionnels des soins primaires. Ces lignes directrices pourraient aussi orienter les décisions de demander une consultation à des programmes d’évaluation diagnostique du CCR.

  5. Peste des petits ruminants

    PubMed Central

    Parida, S.; Muniraju, M.; Mahapatra, M.; Muthuchelvan, D.; Buczkowski, H.; Banyard, A.C.

    2015-01-01

    Peste des petits ruminants virus causes a highly infectious disease of small ruminants that is endemic across Africa, the Middle East and large regions of Asia. The virus is considered to be a major obstacle to the development of sustainable agriculture across the developing world and has recently been targeted by the World Organisation for Animal Health (OIE) and the Food and Agriculture Organisation (FAO) for eradication with the aim of global elimination of the disease by 2030. Fundamentally, the vaccines required to successfully achieve this goal are currently available, but the availability of novel vaccine preparations to also fulfill the requisite for differentiation between infected and vaccinated animals (DIVA) may reduce the time taken and the financial costs of serological surveillance in the later stages of any eradication campaign. Here, we overview what is currently known about the virus, with reference to its origin, updated global circulation, molecular evolution, diagnostic tools and vaccines currently available to combat the disease. Further, we comment on recent developments in our knowledge of various recombinant vaccines and on the potential for the development of novel multivalent vaccines for small ruminants. PMID:26443889

  6. Conception d'un capteur intelligent pour la détection des vapeurs de styrène dans l'industrie

    NASA Astrophysics Data System (ADS)

    Agbossou, Kodjo; Agbebavi, T. James; Koffi, Demagna; Elhiri, Mohammed

    1994-10-01

    The techniques of measurement of toxic gases are nowadays based on the semiconductor type sensors. The modelling and the electronic processing of their signals can be used to improve the accuracy and the efficiency of the measurement. In this paper, an intelligent system using a semiconductor sensor has been designed for the detection of the styrene vapors. A set of the environmental parameters sensors such as the temperature, the pressure and the humidity, is added to the basic sensor and allows a precise detection of the styrene vapors in air. A microcontroller and a communication interface, that are included in the control system and in the data processing system, provide the local intelligence. The linearization routines of the differents sensors are in the memory of the microcontroller. The system made of the sensors, of the amplification circuits, of the microcontroller and of the communication network between the smart sensor and the computer is analysed. A laboratory test of the device is presented and the accuracies and efficiencies of the differents sensors are given. Les techniques fiables de quantification des gaz polluants sont aujourd'hui basées sur l'utilisation des détecteurs à récepteurs chimiques et sur des capteurs à semiconducteurs. La modélisation et le traitement numérique des signaux résultants sont importants pour une mesure efficace et précise dans un milieu donné. Dans cet article, un capteur intelligent, utilisant un détecteur de gaz type semiconducteur a été réalisé pour la détection des vapeurs de styrène. Un ensemble de détecteurs des paramètres environnementaux, tels que la température, la pression et l'humidité, ajoutés au capteur de styrène, permettent de mesurer avec un bon contrôle les vapeurs de styrène dans l'air. Le système de contrôle et de gestion local des données est constitué d'un microcontrôleur et d'une interface de communication. Le microcontrôleur contient dans sa mémoire toutes les

  7. Classification of 20 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Davis, T. M.; Kim, A. G.; Macualay, E.; Lidman, C.; Sharp, R.; Tucker, B. E.; Yuan, F.; Zhang, B.; Lewis, G. F.; Sommer, N. E.; Martini, P.; Mould, J.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  8. Classification of 15 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Yuan, F.; Tucker, B. E.; Lidman, C.; Martini, P.; Gshwend, Julia; Moller, A.; Zhang, B.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  9. Classification of 3 DES Supernovae with OzDES

    NASA Astrophysics Data System (ADS)

    Moller, A.; Tucker, B. E.; Yuan, F.; Lewis, G.; Lidman, C.; Macaulay, E.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.

    2016-02-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  10. Classification of 4 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Glazebrook, K.; Amon, A.; Lidman, C.; Martini, P.; Tucker, B. E.; Yuan, F.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  11. Classification of 6 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Lewis, G. F.; Mould, J.; Lidman, C.; Tucker, B. E.; Sharp, R.; Yuan, F.; Martini, P.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  12. Classification of 14 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Tucker, B. E.; Sharp, R.; Yuan, F.; Zhang, B.; Lidman, C.; Davis, T. M.; Hinton, S.; Mould, J.; Smith, R. C.; Schubnell, M.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Castander, F. J.; Desai, S.; Paech, K.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey. The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  13. Écologie des soins de santé au Canada

    PubMed Central

    Stewart, Moira; Ryan, Bridget

    2015-01-01

    Résumé Objectif Présenter un profil populationnel pancanadien des besoins en soins de santé et de leur utilisation, facile d’accès et permettant des comparaisons entre les provinces et avec d’autres instances internationales. Conception Une comparaison des taux d’utilisation des soins de santé entre les provinces en utilisant des données d’enquêtes et des renseignements administratifs sur la santé. Contexte Les provinces du Canada. Principaux paramètres à l’étude Les taux canadiens et provinciaux de personnes en mauvaise santé (présence de problèmes chroniques) et d’utilisation des soins de santé (contacts avec des médecins de famille, avec d’autres médecins spécialistes, avec des infirmières et hospitalisations) sous forme de proportions mensuelles par 1000 habitants normalisées en fonction de l’âge et du genre. Résultats La proportion mensuelle par 1000 habitants de personnes souffrant d’au moins 1 problème chronique variait de 524 au Québec à 638 en Nouvelle-Écosse; les contacts avec un médecin de famille se situaient entre 158 au Québec et 295 en Colombie-Britannique; les contacts avec d’autres médecins spécialistes variaient entre 53 en Saskatchewan et 79 en Ontario; et le nombre de contacts avec des infirmières se situait entre 23 en Colombie-Britannique et 41 au Québec. Le nombre de séjours à l’hôpital variait entre 8 et 11 par 1000 habitants et les proportions étaient semblables d’une province à l’autre. Conclusion Il est essentiel de reconnaître les distinctions entre les provinces pour éclairer les politiques sur la santé dans l’ensemble du pays. Les différences persistaient lorsque les taux étaient normalisés en fonction de la composition démographique variable selon l’âge et le genre dans les provinces. Cet article présente une méthodologie simple à l’aide de données publiquement accessibles qui peut servir dans chaque province à examiner, à l’avenir, l

  14. Asymmetric Dielectric Elastomer Composite Material

    NASA Technical Reports Server (NTRS)

    Stewart, Brian K. (Inventor)

    2014-01-01

    Embodiments of the invention provide a dielectric elastomer composite material comprising a plurality of elastomer-coated electrodes arranged in an assembly. Embodiments of the invention provide improved force output over prior DEs by producing thinner spacing between electrode surfaces. This is accomplished by coating electrodes directly with uncured elastomer in liquid form and then assembling a finished component (which may be termed an actuator) from coated electrode components.

  15. Annuaire du Bureau des longitudes - 2006

    NASA Astrophysics Data System (ADS)

    Imcce; Bureau Des Longitudes

    2005-07-01

    This annual publication provides ephemerides and data to the use of professionnal and amateur astronomers. Divided in 11 chapters it covers concordance of various calendars, explanation of fondamental astronomy and various time scales, explanation for the use of ephemerides; tables provide ephemerides (positions, rise/set/passage) of the Sun and the Moon, planets, planetary satellites, asteroids, comets, bright stars; data and explanation for the physical observation of the surface of the Sun, the Moon, and planets; chart of the sky and a list of constellations and galaxies; prediction and ephemerides for astronomical phenomenon: occultation by the moon, stellar occultations by asteroids and appulses, solar eclipses and lunar eclipses; and an additional review about a hot scientific topic, this year: "Legendre et le méridien terrestre, 200 ans après". Cette publication annuelle fournit des éphémérides et des données à l'usage des astronomes professionnels et des astronomes amateurs. Composée de 11 chapitres elle comprend les rubriques sur les différents calendriers et leurs concordance, les fêtes légales en France, les dates et décrets sur les heures légales en France métropolitaine ; une introduction à l'astronomie fondamentale et aux différentes échelles de temps, des explications sur l'utilisation des éphémérides ; des tables fournissent les éphémérides (positions, heures de lever/coucher/passage) du Soleil et de la Lune, de planètes, de satellites naturels, d'astéroïdes, de comètes, d'étoiles brillantes ; des données pour l'observation de la surface du Soleil, de la Lune, et des planètes ; des cartes du ciel ainsi qu'une liste de constellations et de galaxies ; des prédictions des phénomènes astronomiques : occultation par la Lune, occultation stellaires par des astéroïdes et appulses, éclipses de Soleil et de la Lune; la liste et les coordonnées des observatoires astronomiques les plus connus ; et enfin un cahier th

  16. Transport quantique dans des nanostructures

    NASA Astrophysics Data System (ADS)

    Naud, C.

    2002-09-01

    structure des oscillations de conductance en fonction du flux du champ magnétique de période h/e dont l'amplitude est beaucoup plus importante que celle mesurée sur un réseau carré de même dimension. Cette différence constitue une signature d'un effet de localisation induit par le champ magnétique sur la topologie mathcal{T}3. Pour des valeurs spécifiques du champ magnétique, du fait des interférences destructives Aharonov-Bohm, la propagation des fonctions d'ondes est limitée à un ensemble fini de cellule du réseau appelé cage. De la dépendance en température des oscillations de période h/e mesurées sur le réseau mathcal{T}3 nous avons tiré une longueur caractéristique qui peut être rattachée au périmètre des cages. Un phénomène inattendu fut l'observation, pour des champs magnétiques plus importants, d'un doublement de fréquence des oscillations. Ces oscillations de période h/2e pouvant avoir une amplitude supérieure aux oscillations de période h/e, une interprétation en terme d'harmonique n'est pas possible. Enfin, l'influence de la largeur électrique des fils constituant le réseau et donc celle du nombre de canaux par brin a été étudiée en réalisant des grilles électrostatique. Les variations de l'amplitude des signaux en h/e et h/2e en fonction de la tension de grille ont été mesurés.

  17. Etienne-François Geoffroy (1672-1731), a Chemist on the Frontiers.

    PubMed

    Joly, Bernard

    2014-01-01

    Etienne-François Geoffroy is certainly the most representative chemist of the Paris Académie Royale des Sciences in the early eighteenth century. Interested in Newtonian ideas, he did not reject Cartesian mechanism. He is the inventor of the "Table des rapports entre les substances chimiques," which remained in use throughout the eighteenth century, but he drew from the alchemical tradition. He readily theorized about the composition of metals or the laws of chemical affinities, but he practiced a chemistry that was rooted in laboratory work and the search for substances useful to craftsmen. PMID:26103751

  18. Etude des effets du martelage repetitif sur les contraintes residuelles

    NASA Astrophysics Data System (ADS)

    Hacini, Lyes

    L'assemblage par soudage peut engendrer des contraintes residuelles. Ces contraintes provoquent des fissurations prematurees et un raccourcissement de la duree de vie des composants. Dans ce contexte, le martelage robotise est utilise pour relaxer ces contraintes residuelles. Trois volets sont presentes: le premier est l'evaluation des effets des impacts unitaires repetes sur le champ de contraintes developpe dans des plaques d'acier inoxydable austenitique 304L vierges ou contenant des contraintes residuelles initiales. Dans la deuxieme partie de ce projet, le martelage est applique grace au robot SCOMPI. Les contraintes residuelles induites et relaxees par martelage sont ensuite mesurees par la methode des contours, qui a ete adaptee a cet effet. Dans la troisieme partie, le martelage est modelise par la methode des elements finis. Un modele axisymetrique developpe grace au logiciel ANSYS permet de simuler des impacts repetes d'un marteau elastique sur une plaque ayant un comportement elastoplastique.

  19. Un exemple de transfert de technologie dans le domaine des polymères conducteurs : le projet ``HYRA"

    NASA Astrophysics Data System (ADS)

    Parneix, J. P.; Miane, J. L.; Colin, T.; Ruffie, G.; Mege, J.

    1998-06-01

    The HYRA project is a response to the restructuration of local companies : these are purveyors of high technology military and spatial especially in the radars business. Furthermore, the development of mobile communications needs devices and materials in the millimeter range (from 20 to 100Ghz). The aim of the HYRA project is the development of materials with specific properties - particularly conducting materials - in the millimeter wave range. The results obtained on thermoplastic/conducting polymer composites are presented. Le projet HYRA répond à des préoccupations régionales liées à des restructurations industrielles : les industries régionales fournissant les marchés militaires et spatiaux disposent de techniques très performantes mais coûteuses, en particulier dans le domaine des radars. Par ailleurs le développement des communications mobiles a besoin de dispositifs et de matériaux dans tout le domaine millimétrique (de 20 à 100 Ghz). Le projet HYRA a pour but le développement de matériaux à propriétés spécifiques - en particulier conducteurs - dans ce domaine de fréquence. Les résultats obtenus sur des composites thermoplastiques/polymères conducteurs sont présentés.

  20. Peste des Petits Ruminants Virus.

    PubMed

    Baron, M D; Diallo, A; Lancelot, R; Libeau, G

    2016-01-01

    Peste des petits ruminants virus (PPRV) causes a severe contagious disease of sheep and goats and has spread extensively through the developing world. Because of its disproportionately large impact on the livelihoods of low-income livestock keepers, and the availability of effective vaccines and good diagnostics, the virus is being targeted for global control and eventual eradication. In this review we examine the origin of the virus and its current distribution, and the factors that have led international organizations to conclude that it is eradicable. We also review recent progress in the molecular and cellular biology of the virus and consider areas where further research is required to support the efforts being made by national, regional, and international bodies to tackle this growing threat. PMID:27112279

  1. The enhancement of existing DES Maplet interface

    NASA Astrophysics Data System (ADS)

    Abdullah, Nur Lina; Mutalip, Rasidah Abdull; Abdullah, Kamilah

    2014-07-01

    This study pertains to the process of Data Encryption Standard, DES. DES consists of encryption and decryption processes linked with mathematical elements such as algebra and number theory. Preliminary, studies revealed that most of mathematics students face a problem in understanding the complicated process of DES. In modern learning methods, learning environment becomes more interesting with the use of computer and a variety of mathematical software packages. Several mathematical softwares such as Maple, Mathematica, Mathlab and Sage were developed in order to fulfill the specific calculation requirements. Correspondingly, motivated from that, this study incorporated with Maple to enhance the existing DES Maplet interface to be more interactive and user-friendly compared to the original version.

  2. Copernic: la piste des influences arabes

    NASA Astrophysics Data System (ADS)

    Khalatbari, A.; Bonnet-Bidaud, J. M.

    2004-10-01

    Copernic a-t-il connu le travail des astronomes du Moyen-Orient ? S'en est-il inspiré pour élaborer sa théorie de l'héliocentrisme ? C'est l'hypothèse avancée par certains historiens des sciences pour comprendre le génie de celui qui, le premier, a placé le Soleil au centre du monde. Enquête.

  3. Diffusion des Metaux et Evolution Stellaire

    NASA Astrophysics Data System (ADS)

    Turcotte, Sylvain

    Nous presentons dans cette these des modeles d'evolution stellaire incorporant la diffusion microscopique de maniere consistante. Pour la premiere fois, on a calcule l'evolution d'etoiles en tenant compte en detail de l'impact des variations d'abondances sur leur structure. Nous utilisons des spectres monochromatiques pour chacun des elements les plus abondants dans un melange solaire pour recalculer l'opacite pour les abondances et les conditions locales dans l'interieur d'une etoile au cours de son evolution. Nos modeles montrent que la diffusion atomique des metaux a un effet important sur les opacites dan les etoiles de plus de 1.3Msolar ou l'abondance du fer et des autres elements du pic du fer varient substantiellement. Ces etoiles, sans rotation ou champ magnetique, sont proches des etoiles de type Fm-Am dans lesquelles on observe une legere surabondance d'elements du pic du fer en plus d'une sous-abondance de calcium, sous-abondance que l'on obtient egalement. Nous obtenons cependant des surabondances depassant un facteur 10 pour les etoiles de plus de 1.4Msolar ce qui suggere qu'il existe un ou plusieurs mecanismes limitant la diffusion microscopique. La surabondance du fer en surface cause une augmentation, qui peut atteindre un facteur sept, de l'opacite a la limite de la zone convective. Ceci cause un accroissement de la temperature effective et de la masse de la zone convective comparativement aux modeles n'incluant que la diffusion de l'helium. Il s'agit la du principal effet de la diffusion sur la structure interne de ces etoiles. La diffusions n'a pas d'influence sur l'evolution de coeur stellaire dans les etoiles significativement plus massives quie le Soleil. Nous avons verife que l'utilisation de modeles consistants avec diffusion n'apporte pas d'amelioration sensible aux modeles solaires. Les forces radiatives calculees a partir des spectres d'OPAL pour les elements du pic du fer representent une fraction importante de la gravite. On obtient des

  4. Effet Hall et Magnetisme des Alliages Amorphes Nickel-Zirconium Fabriques Par Pulverisation

    NASA Astrophysics Data System (ADS)

    Morel, Robert

    Cette these se situe dans le cadre d'une etude des proprietes electroniques et structurales des alliages metalliques amorphes, en cours depuis quelques annees a l'Universite de Montreal. Ce programme nous a entre autres amene a caracteriser la magnetoresistivite et l'effet Hall d'alliages FeZr, CoZr et NiZr, ce qui a permis de mettre en evidence deux caracteristiques de l'effet Hall: Dans les alliages amorphes ferromagnetiques, la resistivite elevee engendre un effet Hall extraordinaire beaucoup plus important que celui enregistre dans les metaux cristallins. La polarisation des spins entrai ne une asymetrie de la diffusion qui, tant dans les phases cristalline et amorphe, est tenue responsable de cette contribution. L'autre particularite du comportement de Hall de ces systemes est le renversement de signe du coefficient de Hall ordinaire, qui passe du negatif au positif dans les echantillons plus riches en zirconium. Dans les metaux cristallins, un modele d'electrons libres predit un signe negatif a moins que la conduction ne soit dominee par les trous. Or, dans un milieu desordonne les memes concepts sont difficilement applicables et de nouvelles theories ont du etre elaborees pour expliquer ce phenomene. Jusqu'a maintenant, l'etude des alliages amorphes nickel-zirconium s'est faite surtout a partir d'echantillons fabriques par trempe sur roue. Malheureusement cette technique ne permet pas la fabrication d'alliages contenant plus de 70% de nickel, a l'exception du seul compose Ni _{90}Zr_{10 }. Pour pallier a cette lacune et etendre nos connaissance a l'ensemble de la gamme de compositions, nous avons fabrique par pulverisation cathodique des echantillons NiZr amorphes--et quelques alliages cristallins tres riches en nickel--couvrant une bonne partie de la gamme interdite par la technique de trempe sur roue. Dans un premier temps, par comparaison avec les resultats connus nous avons mis en evidence les similitudes et les differences entre les alliages obtenus par

  5. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  6. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  7. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  8. Étude de la variation spatio-temporelle des paramètres physico-chimiques caractérisant la qualité des eaux d'une lagune côtière et ses zonations écologiques : cas de Moulay Bousselham, Maroc

    NASA Astrophysics Data System (ADS)

    Labbardi, Hanane; Ettahiri, Omar; Lazar, Said; Massik, Zakia; El Antri, Said

    2005-04-01

    Our interest is related to the hydrological characteristics of the Moulay Bousselham lagoon. Water samples were taken monthly from July 2001 to June 2002 in 15 stations distributed along the lagoon. The various measured hydrological parameters (temperature, salinity, suspended matter, chlorophyll a) showed significant monthly variations ( p<0.001), whereas spatially among all sampled stations, only the salinity showed significant variations. The variability analysis approached by the analysis of the normalized principal components combined with discriminate analysis showed very small inter-stations variability. Its percentage is 11% and 9% of the total variance during high and low tide, respectively. To cite this article: H. Labbardi et al., C. R. Geoscience 337 (2005).

  9. Apports des analyses chimiques et isotopiques à la connaissance du fonctionnement des aquifères plio-quaternaire et turonien de la zone synclinale d'Essaouira, Maroc occidentalGeochemistry of Plio-Quaternary and Turonian aquifers in the Essaouira Basin, western Moroco

    NASA Astrophysics Data System (ADS)

    Mennani, A.; Blavoux, B.; Bahir, M.; Bellion, Y.; Jalal, M.; Daniel, M.

    2001-05-01

    The Essaouira synclinal zone is one of the Moroccan semi-arid zones with annual rainfalls not exceeding 300 mm yr -1 and very high potential evapo-transpiration of about 920 mm yr -1. This syncline with a Senonian axial zone is bordered by two diapiric structures of Triassic deposits: the Tidzi Diapir that outcrops in the east and south, and the hidden Essaouira diapir in the west, which was found by geophysics. This syncline contains two main superimposed aquifers. (i) The Plio-Quaternary aquifer consists of sands, sandstone and conglomerates and provides the main part of the water supply. This free-water table flows out towards the northwest and its surface is affected by significant piezometric variations. (ii) The calcareous dolomitic Turonian is a confined aquifer under the Senonian marls in the and in direct contact with the Plio-Quaternary. For a few years, the drinking water supply to the town of Essaouira has come from deep drillings. These two aquifers were sampled in June 1995 and in Januray 1996 after exceptional rainfalls. All waters have the same geochemical profile. The interpretation of the total dissolved solids and chloride content of Plio-Quaternary aquifers makes it possible to specify their origins. It emphasises, in particular, the source from the Ksob Wadi in the northeast and the role of the hidden Essaouira diapir. Nitrate levels were raised excessively, increasing at the same time as chloride concentrations during the rains of the winter of 1996, and underline the wells vulnerability to pastoral and domestic activities. The interpretation of O- and H-isotopes distinguishes two contrasting Plio-Quaternary and Turonian aquifers with an Atlantic origin for the rain recharge. A specific campaign was varried out in November 1996 to date water from the Turonian aquifer by 14C. Two boreholes draw water of several thousands years old.

  10. The GBT-SerDes ASIC prototype

    NASA Astrophysics Data System (ADS)

    Moreira, P.; Baron, S.; Bonacini, S.; Cobanoglu, O.; Faccio, F.; Feger, S.; Francisco, R.; Gui, P.; Li, J.; Marchioro, A.; Paillard, C.; Porret, D.; Wyllie, K.

    2010-11-01

    In the framework of the GigaBit Transceiver project (GBT), a prototype, the GBT-SerDes ASIC, was developed, fabricated and tested. To sustain high radiation doses while operating at 4.8Gb/s, the ASIC was fabricated in a commercial 130 nm CMOS technology employing radiation tolerant techniques and circuits. The transceiver serializes-deserializes the data, Reed-Solomon encodes and decodes the data and scrambles and descrambles the data for transmission over optical fibre links. This paper describes the GBT-SerDes architecture, and presents the test results.

  11. Caractérisations structurale et morphologique des couches minces de CuInS2 et d'In-S "airless spray"

    NASA Astrophysics Data System (ADS)

    Kamoun, N.; Belgacem, S.; Amlouk, M.; Bennaceur, R.; Abdelmoula, K.; Belhadj Amara, A.

    1994-03-01

    We have prepared CuInS2 thin layers by airless spray "S.P.A." in order to use them as an absorber in a photovoltaic cell. The X-ray diffraction analysis has showed that these layers are well crystallized with a privileged (112) principal orientation for a ratio of the concentrations in the pulverized solution x=frac[Cu^I][In^{III]}=1.1. After heat treatment under vacuum the crystallization have been clearly improved. The structural analysis of the thin CuInS2 layers have revealed that a secondary phases of In2S3 and In6S7 are present. Thus we have realized by the same technique thin In-S layers whose structural and morphological properties have been studied. This analysis has showed that the In-S layers are well crystallized for a ratio y=frac[In^{3+]}[S^{2-]}=0.6 in the spray solution. The In-S layers are essentially formed by a β-In2S3 material. Although the In6S7 phase appears to the detriment of β-In2S3 phase for y= 0.75. Nous avons préparé des couches minces de CuInS2, par pulvérisation chimique réactive sans air "P.S.A.", en vue de leur utilisation en tant qu'absorbeur dans un dispositif photovoltaïque. L'analyse par diffraction X a montré que ces couches sont bien cristallisées et que l'orientation principale (112) est privilégiée pour un rapport de concentrations x=frac[Cu^I]{[In^{III}]}=1,1 dans la solution à pulvériser. Après le traitement thermique sous vide la cristallisation est nettement améliorée. L'analyse structurale des couches minces de CuInS2 a révélé que ces couches renferment des phases secondaires d'In2S3 et d'In6S7. Ainsi nous avons réalisé par la même technique "P.S.A.", des couches minces d'In-S dont nous avons étudié les propriétés structurales et morphologiques, Cette analyse a montré que les couches d'In-S sont bien cristallisées. Pour un rapport de concentrations en solution de pulvérisation y=frac[In^{3+]}[S^{2-]}=0,6 les couches d'In-S sont surtout formées du matériau β-In2S3. Alors que la phase In6S7

  12. Lignes directrices sur l’aiguillage des cas soupçonnés de cancer du poumon par un médecin de famille ou autre professionnel des soins primaires

    PubMed Central

    Del Giudice, M. Elisabeth; Young, Sheila-Mae; Vella, Emily T.; Ash, Marla; Bansal, Praveen; Robinson, Andrew; Skrastins, Roland; Ung, Yee; Zeldin, Robert; Levitt, Cheryl

    2014-01-01

    Résumé Objectif Les présentes lignes directrices visent à aider les médecins de famille et autres généralistes à reconnaître les manifestations cliniques devant éveiller les soupçons quant à la présence d’un cancer du poumon chez les patients. Composition du comité Les membres du comité ont été choisis parmi les leaders régionaux en soins primaires du Réseau provincial des soins primaires et de la lutte contre le cancer d’Action Cancer Ontario et parmi les membres du Groupe sur le siège de la maladie, Cancer du poumon d’Action Cancer Ontario. Méthodes Les présentes lignes directrices sont le fruit d’une revue systématique des données probantes, d’une synthèse des données et d’un examen externe formel effectué par des intervenants canadiens qui ont validé la pertinence des recommandations. Rapport Ces lignes directrices fondées sur des données probantes ont été formulées pour améliorer la prise en charge en contexte canadien des patients qui présentent des manifestations cliniques du cancer du poumon. Conclusion Le dépistage et l’aiguillage précoces des patients atteints de cancer du poumon pourraient en fin de compte aider à réduire les morbidités et mortalités liées au cancer. Ces lignes directrices pourraient aussi s’avérer utiles dans la mise sur pied de programmes de diagnostic du cancer du poumon et pour aider les décideurs à veiller à ce que les ressources appropriées soient en place.

  13. Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

    NASA Astrophysics Data System (ADS)

    Sotomayor Cruz, Cristian Daniel

    Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des

  14. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    NASA Astrophysics Data System (ADS)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  15. Developpement de techniques numeriques pour l'estimation, la modelisation et la prediction de proprietes thermodynamiques et structurales de systems metalliques a fort ordonnancement chimique

    NASA Astrophysics Data System (ADS)

    Harvey, Jean-Philippe

    consistent thermodynamic, physical and structural data for solid, liquid, and stoichiometric compounds and the subsequent parameterization of their respective thermodynamic model lead to the first description of the complete Al-Zr phase diagram in the range of composition [0 ≤ XZr ≤ 5 / 9] based on theoretical and fully consistent thermodynamic properties. MC and MD simulations are performed for the Al-Zr system to define for the first time the precise thermodynamic behaviour of the amorphous phase for its entire range of composition. Finally, all the thermodynamic models for the liquid phase, the FCC solid solution and the amorphous phase are used to define conditions based on thermodynamic and volumetric considerations that favor the amorphization of Al-Zr alloys.

  16. Effets des electrons secondaires sur l'ADN

    NASA Astrophysics Data System (ADS)

    Boudaiffa, Badia

    Les interactions des electrons de basse energie (EBE) representent un element important en sciences des radiations, particulierement, les sequences se produisant immediatement apres l'interaction de la radiation ionisante avec le milieu biologique. Il est bien connu que lorsque ces radiations deposent leur energie dans la cellule, elles produisent un grand nombre d'electrons secondaires (4 x 104/MeV), qui sont crees le long de la trace avec des energies cinetiques initiales bien inferieures a 20 eV. Cependant, il n'y a jamais eu de mesures directes demontrant l'interaction de ces electrons de tres basse energie avec l'ADN, du principalement aux difficultes experimentales imposees par la complexite du milieu biologique. Dans notre laboratoire, les dernieres annees ont ete consacrees a l'etude des phenomenes fondamentaux induits par impact des EBE sur differentes molecules simples (e.g., N2, CO, O2, H2O, NO, C2H 4, C6H6, C2H12) et quelques molecules complexes dans leur phase solide. D'autres travaux effectues recemment sur des bases de l'ADN et des oligonucleotides ont montre que les EBE produisent des bris moleculaires sur les biomolecules. Ces travaux nous ont permis d'elaborer des techniques pour mettre en evidence et comprendre les interactions fondamentales des EBE avec des molecules d'interet biologique, afin d'atteindre notre objectif majeur d'etudier l'effet direct de ces particules sur la molecule d'ADN. Les techniques de sciences des surfaces developpees et utilisees dans les etudes precitees peuvent etre etendues et combinees avec des methodes classiques de biologie pour etudier les dommages de l'ADN induits par l'impact des EBE. Nos experiences ont montre l'efficacite des electrons de 3--20 eV a induire des coupures simple et double brins dans l'ADN. Pour des energies inferieures a 15 eV, ces coupures sont induites par la localisation temporaire d'un electron sur une unite moleculaire de l'ADN, ce qui engendre la formation d'un ion negatif transitoire

  17. The "Conservatoire National des Arts et Metiers"

    ERIC Educational Resources Information Center

    Kuhn, Gerard

    2004-01-01

    The overall mission of the Conservatoire national des arts et metiers--(CNAM) [National Conservatory of Industrial Arts and Trades] is outlined. One of its centers, the "Centre national de l'entrepreneuriat"--(CNE) [National Center for Entrepreneurship] is described in greater detail. In particular, this center offers various services, notably…

  18. The Effect of Instruction on Children's Perceived Musical Tension in Debussy's "Noel des enfants qui n'ont plus de maisons"

    ERIC Educational Resources Information Center

    Hackworth, Rhonda S.; Fredrickson, William E.

    2012-01-01

    The study explored possible effects of instruction (highlighting a choral composition's historical and social context) on perceived musical tension recorded by children (N = 62). Children listened to a recording of Debussy's "Noel des enfants qui n'ont plus de maisons" (The Christmas Carol of the Children who No Longer Have a House/Home) performed…

  19. Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

    NASA Astrophysics Data System (ADS)

    Fall, H.; Charon, W.; Kouta, R.

    2002-12-01

    Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

  20. Electrocatalyst compositions

    DOEpatents

    Mallouk, Thomas E.; Chan, Benny C.; Reddington, Erik; Sapienza, Anthony; Chen, Guoying; Smotkin, Eugene; Gurau, Bogdan; Viswanathan, Rameshkrishnan; Liu, Renxuan

    2001-09-04

    Compositions for use as catalysts in electrochemical reactions are described. The compositions are alloys prepared from two or more elemental metals selected from platinum, molybdenum, osmium, ruthenium, rhodium, and iridium. Also described are electrode compositions including such alloys and electrochemical reaction devices including such catalysts.

  1. The stearoyl-acyl-carrier-protein desaturase promoter (Des) from oil palm confers fruit-specific GUS expression in transgenic tomato.

    PubMed

    Saed Taha, Rima; Ismail, Ismanizan; Zainal, Zamri; Abdullah, Siti Nor Akmar

    2012-09-01

    The stearoyl-acyl-carrier-protein (ACP) desaturase is a plastid-localized enzyme that catalyzes the conversion of stearoyl-ACP to oleoyl-ACP and plays an important role in the determination of the properties of the majority of cellular glycerolipids. Functional characterization of the fatty acid desaturase genes and their specific promoters is a prerequisite for altering the composition of unsaturated fatty acids of palm oil by genetic engineering. In this paper, the specificity and strength of the oil palm stearoyl-ACP desaturase gene promoter (Des) was evaluated in transgenic tomato plants. Transcriptional fusions between 5' deletions of the Des promoter (Des1-4) and the β-glucuronidase (GUS) reporter gene were generated and their expression analyzed in different tissues of stably transformed tomato plants. Histochemical analysis of the Des promoter deletion series revealed that GUS gene expression was confined to the tomato fruits. No expression was detected in vegetative tissues of the transgenic plants. The highest levels of GUS activity was observed in different tissues of ripe red fruits (vascular tissue, septa, endocarp, mesocarp and columella) and in seeds, which harbored the promoter region located between -590 and +10. A comparison of the promoter-deletion constructs showed that the Des4 promoter deletion (314bp) produced a markedly low level of GUS expression in fruits and seeds. Fluorometric analysis of the GUS activity revealed a 4-fold increase in the activity of the full-length Des promoter compared to the CaMV35S promoter. RNA-hybridization analyses provided additional evidence of increased GUS expression in fruits driven by a Des fragment. Taken together, these results demonstrate the potential of the Des promoter as a tool for the genetic engineering of oil palms and other species, including dicots, in improving the quality and nutritional value of the fruits. PMID:22658816

  2. Clinical Outcome of First- vs Second-Generation DES According to DAPT Duration: Results of ARCTIC-Generation.

    PubMed

    Collet, Jean-Philippe; Silvain, Johanne; Kerneis, Mathieu; Cuisset, Thomas; Meneveau, Nicolas; Boueri, Ziad; Barthélémy, Olivier; Rangé, Grégoire; Cayla, Guillaume; Belle, Eric Van; Elhadad, Simon; Carrié, Didier; Caussin, Christophe; Rousseau, Hélène; Aubry, Pierre; Monségu, Jacques; Sabouret, Pierre; O'Connor, Stephen A; Abtan, Jérémie; Saint-Etienne, Christophe; Beygui, Farzin; Vicaut, Eric; Montalescot, Gilles

    2016-04-01

    There is an apparent benefit with extension of dual antiplatelet therapy (DAPT) beyond 1 year after implantation of drug-eluting stents (DES). Assessment by a Double Randomization of a Conventional Antiplatelet Strategy vs a Monitoring-Guided Strategy for Drug-Eluting Stent Implantation, and of Treatment Interruption vs Continuation One Year After Stenting (ARCTIC)-Generation assessed whether there is a difference of outcome between first- vs second-generation DES and if there is an interaction with DAPT duration in the ARCTIC-Interruption study. ARCTIC-Interruption randomly allocated 1259 patients 1 year after stent implantation to a strategy of interruption of DAPT (n = 624), in which aspirin antiplatelet treatment only was maintained, or DAPT continuation (n = 635) for 6 to 18 additional months. The primary endpoint was the composite of death, myocardial infarction, stent thrombosis, stroke, or urgent revascularization. A total of 520 and 722 patients received a first- and a second-generation DES, respectively. After a median follow-up of 17 months (interquartile range, 15-18 months) after randomization, the primary endpoint occurred in 32 (6.2%) and 19 (2.6%) patients with first- and second-generation DES, respectively (hazard ratio: 2.31, 95% confidence interval: 1.31-4.07, P = 0.004). This was observed irrespective of the strategy of interruption or continuation of DAPT and timing of study recruitment. Major bleeding events occurred in 4 (0.8%) and 3 patients (0.4%) with first- and second-generation DES, respectively (hazard ratio: 1.79, 95% confidence interval: 0.40-8.02, P = 0.44). Results did not change after multiple adjustments for potential confounding variables. ARCTIC-Generation showed worse clinical outcome with first- vs second-generation DES, a difference that appeared to persist even with prolonged DAPT. PMID:26880570

  3. Profil epidemiologique des brulures d'enfants admis au Centre National des Brules, Maroc

    PubMed Central

    Zahid, A.; Atannaz, J.; Alaoui, M.; Rafik, A.; Ezzoubi, M.; Diouri, M.; Chlihi, A.; Bahechar, N.; Boukind, E.H.

    2011-01-01

    Summary Ce travail rétrospectif analyse les particularités épidémiologiques de 543 cas de brûlures d'enfants, représentant 45,7% des admissions de notre centre, en vue de déterminer les éléments pouvant contribuer à renforcer la prévention, qui reste le traitement de choix de cette pathologie. La moyenne d'âge est de 4,25 ans avec une prédilection pour la tranche d'âge d'un à cinq ans, avec 42,5% des cas. Une atteinte masculine est retrouvée dans 63,5% des cas. La brûlure survient à domicile dans 85,1% et accidentellement dans 95% des cas. Les brûlures thermiques représentent 96,5% des causes dominées par les liquides dans 69,3% des cas. La surface cutanée brûlée est ≥ 20% dans 52,3%. La brûlure intéresse essentiellement les membres supérieurs (79,1%). 56,8% des enfants sont transférés par d'autres hôpitaux et le délai de prise en charge hospitalière est supérieur à 6 heures dans 65,5%. Le taux de mortalité a été de 13,2%. PMID:22639559

  4. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    NASA Astrophysics Data System (ADS)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  5. Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

    NASA Astrophysics Data System (ADS)

    Leger, Michel T.

    Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une

  6. Long term dismantling of a basaltic volcano (Piton des Neiges, La Réunion hotspot).

    NASA Astrophysics Data System (ADS)

    Chaput, Marie; Famin, Vincent; Michon, Laurent; Catry, Thibault

    2010-05-01

    We present a structural investigation of destabilization processes at the Piton des Neiges, the extinct volcano of La Reunion Island. We focus on the Cirque of Cilaos (a large erosional depression south of the volcano summit), where the exposed internal structure of Piton des Neiges is made of pahoehoe lava flows of the shield building stage (unknown thickness) and breccias (~1 km thick), covered by volcanic products of the differentiated stage (~1 km thick). The breccias contain only basic elements and consist in debris flows and debris avalanches deposits. Beddings in the debris flows and shear structures in the avalanche deposits indicate a runout in the direction 300°. We suggest that these breccias may represent the upper part of the Cap La Houssaye mass wasting events observed onshore and offshore on the western side of la Réunion (Bachèlery et al., 2003). The breccias display many indicators of brittle deformation, such as faults (normal and strike slip) and intrusions (dykes and sills). Fault data inversion allows to recognize two episodes of deformation. The first, older step of deformation is consistent with a minimum principal stress oriented N120. Intrusions related to this deformation are basic magmas of the shield building stage. The second, later stage of extension oriented N-S crosscuts the N120 deformation with intrusion compositions of the differentiated stage. These results show that the dismantling of Piton des Neiges proceeded in two ways: catastrophic episodic destabilization and slow internal deformation. During the shield-building stage, slow and rapid dismantling was occurring in the 300° direction in the studied area, whereas it evolved toward a N-S slow collapse during the differentiated stage of magmatic activity. This result fully agrees with a recent study carried out within debris avalanches deposits in the cirque of Salazie (north of Piton des Neiges summit) which attests that the northern flank of the Piton des Neiges has also

  7. Community Environmental Response Facilitation Act (CERFA) report. Fort Des Moines, Des Moines, Iowa. Final report

    SciTech Connect

    Young, B.; Rausch, K.; Kang, J.

    1994-04-01

    This report presents the results of the Community Environmental Response Facilitation Act (CERFA) investigation conducted by The Earth Technology Corporation (TETC) at the Fort Des Moines, a U.S. Government property selected for closure by the Base Realignment and Closure (BRAC) Commission. Under CERFA Federal agencies are required to identify real property that can be immediately reused and redeveloped. Satisfying this objective requires the identification of real property where no hazardous substances or petroleum products, regulated by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), were stored for one year or more, known to have been released, or disposed. Fort Des Moines is a 53.28-acre site located in Polk County, Iowa, within the city limits of Des Moines. The installation's primary mission is to provide support and shelter for the U.S. Army Reserve. Activities associated with the property that have environmental significance are photographic processing, vehicle maintenance, printing, and fuel storage. TETC reviewed existing investigation documents; U.S. Environmental Protection Agency (USEPA), State, and county regulatory records; environmental data bases; and title documents pertaining to Fort Des Moines during this investigation. In addition, TETC conducted interviews and visual inspections of Fort Des Moines as well as visual inspections and data base searches for the surrounding properties. Information in this CERFA Report was current as of April 1994.

  8. Composite Materials

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Composites are lighter and stronger than metals. Aramid fibers like Kevlar and Nomex were developed by DuPont Corporation and can be combined in a honeycomb structure which can give an airplane a light, tough structure. Composites can be molded into many aerodynamic shapes eliminating rivets and fasteners. Langley Research Center has tested composites for both aerospace and non-aerospace applications. They are also used in boat hulls, military shelters, etc.

  9. Composites review

    NASA Technical Reports Server (NTRS)

    Hordonneau, A.

    1987-01-01

    The properties and applications of composite materials are reviewed. Glass, carbon, Kevlar, ceramic, whisker, and metal fibers are discussed along with polyester, epoxy, polyimide, Peek, carbon, ceramic, and metal matrices. The quantitative distribution of high technology fiber in various applications is given. The role of aerospace industry in the development and promotion of composite utilization is discussed. Consumption trends indicate a rapid development of the composite market.

  10. Energetic composites

    DOEpatents

    Danen, Wayne C.; Martin, Joe A.

    1993-01-01

    A method for providing chemical energy and energetic compositions of matter consisting of thin layers of substances which will exothermically react with one another. The layers of reactive substances are separated by thin layers of a buffer material which prevents the reactions from taking place until the desired time. The reactions are triggered by an external agent, such as mechanical stress or an electric spark. The compositions are known as metastable interstitial composites (MICs). This class of compositions includes materials which have not previously been capable of use as energetic materials. The speed and products of the reactions can be varied to suit the application.

  11. Energetic composites

    DOEpatents

    Danen, W.C.; Martin, J.A.

    1993-11-30

    A method for providing chemical energy and energetic compositions of matter consisting of thin layers of substances which will exothermically react with one another. The layers of reactive substances are separated by thin layers of a buffer material which prevents the reactions from taking place until the desired time. The reactions are triggered by an external agent, such as mechanical stress or an electric spark. The compositions are known as metastable interstitial composites (MICs). This class of compositions includes materials which have not previously been capable of use as energetic materials. The speed and products of the reactions can be varied to suit the application. 3 figures.

  12. Composite floorpan

    SciTech Connect

    Frutiger, R.L.; Baskar, S.

    1993-02-01

    Composite applications for automotive components have been a topic of increased interest. Some applications--load-bearing composites such as bumpers and leaf springs--have been implemented successfully in production vehicles. On the other hand, semi-structural load-bearing composites such as floorpans have not been investigated as extensively for stiffness, strength, and durability. Past studies have used structural composites to achieve parts consolidation in van crossmembers. A rear floorpan has also been demonstrated in composites. A hybrid vehicle structure consisting of a composite passenger module on a steel frame has been proposed. Assessments of the energy management of full composite front structures have also been reported. There remains a need to assess structural composites for a major load-bearing panel with real-vehicle packaging and design requirements; a floorplan is one such application. This design concept might be used in a space-frame vehicle structure in which composite panels could be used to complete the structure and provide additional torsional rigidity while meeting local strength and stiffness requirements.

  13. TRANSPLANTATION EN MASSE DES ORGANES ABDOMINAUX

    PubMed Central

    STARZL, T.

    2010-01-01

    Les transplantations multi-organes, comprenant les blocs foie-duodénum-pancréas, foie-estomac-duodénum-pancréas, et foie-intestin sont réalisées avec un succés croissant Ces techniques et leurs combinaisons variées de transplantation monobloc ne sont pas de pratique courante. Les techniques de prélévement, de conservation et de soins post-opératoires sont décrites pour la transplantation multi-organes compléte ainsi que pour les variantes incomplétes. Le probléme particulier à ce type de transplantation est celui de la transplantation intestinale, c’est-à-dire la transplantation d’un organe à composante lymphoréticulaire complexe ce qui peut provoquer un syndrome greffon contre hôte. Par erreur de conception, et un peu par esprit de systéme, les efforts par le passé étaient dirigés sur la modification et la destruction des systémes lymphoréticulaires grâce au traitement préalable du donneur ou des organes transplantés, par médicaments, radiation ou autres moyens. Actuellement, I’idée directrice est de garder intacte les systémes lymphoréticulaires qui deviennent alors le site d’une circulation à double sens aprés transplantation. Avec la puissante immunodépression que fournit le FK 506, les cellules lymphoréticulaires du donneur peuvent circuler chez le receveur sans créer de syndrome du greffon contre hôte clinique et les cellules de la greffe s’assimilent à celles du receveur (chimérisme local) sans provoquer de rejet. Même si I’on évite le rejet ou le syndrome greffon contre hôte, il existe, à côté de ces entités, des relations métaboliques entre les organes greffés ainsi qu’entre les organes greffés et les viscéres du receveur laissés en place, qui peuvent influencer I’avenir soit des organes greffés, soit des organes laissés en place. Parmi les échanges métaboliques les mieux connus actuellement, il y a les facteurs splanchniques hépatotrophes endogénes, dont I’insuline est la mieux

  14. Elaboration d'un composite conducteur a base de polypyrrole et de nanofibres de cellulose

    NASA Astrophysics Data System (ADS)

    Bideau, Benoit

    Le projet de production de nanocellulose à grande échelle par l'équipe de recherche du professeur Claude Daneault, ne pourra se faire sans avoir démontré sa quelconque utilité sur le marché économique. C'est dans cette optique que s'est articulé mon travail afin de mettre en avant une des voix de valorisation de ces nanocelluloses. Nous avons travaillé plus précisément sur le développement d'un nanocomposite conducteur biodégradable. Nous nous sommes proposé dans ce travail de développer une technique simple et écologique permettant la conception d'un matériau composite conducteur. Nous avons étudié l'influence des nanofibres de cellulose, du pyrrole, de la température, de la durée de polymérisation et l'ajout d'additifs dans le matériau composite. L'étude de ces paramètres nous a permis de déterminer les meilleures conditions pour le développement d'un film composite conducteur avec des propriétés mécaniques acceptables. L'ajout de ce renfort (nanofibres), au sein de la matrice de polypyrrole a permis d'obtenir des films intéressants, de part leurs propriétés mécaniques, électriques et de leur caractère biodégradable. Des comparaisons ont été effectuées avec des fibres oxydées, afin d'étudier l'apport des nanofibres de cellulose au composite. Notre étude a ensuite été élargie à l'ajout d'additifs dans les matériaux conducteurs afin d'améliorer certaines propriétés du composite. L'objectif de ce travail visait l'étude de l'incorporation des nanofibres de cellulose dans une matrice de polypyrrole en vue de son utilisation en tant que matériau conducteur biodégradable pour des applications dans le domaine énergétique. Mots Clés: Nanocellulose, polypyrrole, composite, conducteur, biodégradable, propriétés mécaniques, additifs.

  15. A Magellanic origin of the DES dwarfs

    NASA Astrophysics Data System (ADS)

    Jethwa, P.; Erkal, D.; Belokurov, V.

    2016-09-01

    We establish the connection between the Magellanic Clouds (MCs) and the dwarf galaxy candidates discovered in the Dark Energy Survey (DES) by building a dynamical model of the MC satellite populations, based on an extensive suite of tailor-made numerical simulations. Our model takes into account the response of the Galaxy to the MCs infall, the dynamical friction experienced by the MCs and the disruption of the MC satellites by their hosts. The simulation suite samples over the uncertainties in the MC's proper motions, the masses of the MW and the Clouds themselves, and allows for flexibility in the intrinsic volume density distribution of the MC satellites. As a result, we can accurately reproduce the DES satellites' observed positions and kinematics. Assuming that Milky Way (MW) dwarfs follow the distribution of sub-haloes in Λ cold dark matter, we further demonstrate that, of 14 observed satellites, the MW halo contributes fewer than 4(8) of these with 68(95) per cent confidence and that 7(12) DES dwarfs have probabilities greater than 0.7(0.5) of belonging to the Large Magellanic Cloud (LMC). Marginalizing over the entire suite, we constrain the number of Magellanic satellites in the range -7 < MV < -1 which exceed the DES surface brightness threshold at ˜70, and the mass of the LMC around 1011 M⊙. The data also strongly support a first-infall scenario for the LMC. Finally, we give predictions for the line-of-sight velocities and the proper motions of the satellites discovered in the vicinity of the LMC.

  16. Early Results from the DES SN Survey

    NASA Astrophysics Data System (ADS)

    Scolnic, Daniel; Dark Energy Survey

    2016-01-01

    The Dark Energy Survey Supernova program (DES SN) has already discovered over 1000 Type Ia supernovae with well-sampled multi-color light curves in the redshift range 0.1 < z < 1.2. I will present an overview of the survey and show recent advances in our detection, photometry, calibration and spectroscopic follow-up pipelines. I will go over initial results from photometric classification of our sample and discuss methods used to reach measurements of cosmological parameters.

  17. A Magellanic Origin of the DES Dwarfs

    NASA Astrophysics Data System (ADS)

    Jethwa, P.; Erkal, D.; Belokurov, V.

    2016-06-01

    We establish the connection between the Magellanic Clouds (MCs) and the dwarf galaxy candidates discovered in the Dark Energy Survey (DES) by building a dynamical model of the MC satellite populations, based on an extensive suite of tailor-made numerical simulations. Our model takes into account the response of the Galaxy to the MCs infall, the dynamical friction experienced by the MCs and the disruption of the MC satellites by their hosts. The simulation suite samples over the uncertainties in the MC's proper motions, the masses of the MW and the Clouds themselves and allows for flexibility in the intrinsic volume density distribution of the MC satellites. As a result, we can accurately reproduce the DES satellites' observed positions and kinematics. Assuming that Milky Way (MW) dwarfs follow the distribution of subhaloes in ΛCDM, we further demonstrate that, of 14 observed satellites, the MW halo contributes fewer than 4(8) of these with 68(95)% confidence and that 7(12) DES dwarfs have probabilities greater than 0.7(0.5) of belonging to the LMC. Marginalising over the entire suite, we constrain the number of Magellanic satellites in the range -7 < MV < -1 which exceed the DES surface brightness threshold at ˜70, and the mass of the LMC around 1011M⊙. The data also strongly support a first-infall scenario for the LMC. Finally, we give predictions for the line-of-sight velocities and the proper motions of the satellites discovered in the vicinity of the LMC.

  18. Sonderverfahren des Spritzgießens

    NASA Astrophysics Data System (ADS)

    Michaeli, Walther; Lettowsky, Christoph

    Das Spritzgießen ist neben der Extrusion das wichtigste Verarbeitungsverfahren für Kunststoffe [1]. Das Verfahren hat sich seit seinen Ursprüngen Ende des 19. Jahrhunderts bis heute stetig weiterentwickelt [2]. In neuerer Zeit steigt die Anzahl komplexer Anwendungen, die die gezielte Kombination verschiedener Funktionalitäten in einem Formteil erfordern. Das Standard-Spritzgießen kann diese Anforderungen immer weniger befriedigen. Daher gewinnen die Sonderverfahren des Spritzgießens zunehmend an Bedeutung [3]. Ihre Anzahl beträgt inzwischen über 100. Die Aufgabe des Anwenders ist es, aus der Vielzahl der möglichen Verfahren, ein anforderungsgerechtes auszuwählen, das sowohl unter technischen wie wirtschaftlichen Gesichtspunkten die optimale Lösung darstellt. Dies setzt die ständige Auseinandersetzung mit Entwicklungstendenzen im Bereich der Spritzgießtechnologie voraus. Daher soll im folgenden Abschnitt ein Überblick über die wichtigsten Spritzgieß-Sonderverfahren gegeben werden.

  19. Profil anthropometrique des enfants scolarises tananariviens

    PubMed Central

    Razafimanantsoa, Fetralinjiva; Razafindramaro, Notahiana; Raherimandimby, Hasina; Robinson, Annick; RakotoAlson, Olivat; Rasamindrakotroka, Andry

    2013-01-01

    Les enfants tananariviens sont en état de malnutrition chronique. Notre objectif est d’évaluer l'indice de masse corporelle (IMC) pour estimer les enfants apparemment "sains". Une enquête et une mesure de la taille et du poids des enfants scolarisés tananariviens de 6 à 11 ans ont été réalisées. Après leur accord, la taille et l'indice de masse corporelle des 442 enfants tirés au hasard ont été ainsi obtenus. L'analyse de la moyenne de la taille a révélé une différence significative à 8 ans, une différence non évidente sur l'indice de masse corporelle. La comparaison avec les valeurs de référence (OMS 2006) a montré un retard statural de 34% avec une tendance globale à la hausse et un déficit pondéral égal à 5,5% selon le z score. Ainsi, au sein d'une population malnutrie, l'indice de masse corporelle pourrait être utilisé comme un des paramètres à considérer dans l’évaluation de l’état de santé pour classer ces enfants en bonne santé apparente. PMID:24711862

  20. Dermatomyosite et panniculite: place des immunoglobulines

    PubMed Central

    Abdelhafidh, Nadia Ben; Toujeni, Sana; Kefi, Asma; Bousetta, Najeh; Sayhi, Sameh; Gharsallah, Imen; Othmani, Salah

    2016-01-01

    La panniculite est une maladie inflammatoire du tissu adipeux sous-cutané rarement associée à la dermatomyosite. Elle peut survenir avant, après ou en même temps que l'atteinte musculaire. Dans la plupart des cas, l’évolution de la panniculite et des autres atteintes de la dermatomyosite est favorable sous traitement corticoïde et/ou immunosuppresseur. Nous rapportons le cas d'une patiente âgée de 48 ans ayant présenté des lésions de panniculite précédant de 2 mois les signes musculaires. L'atteinte cutanée était résistante au traitement corticoïde associés aux immunosuppresseurs ce qui a nécessité le recours au traitement par Immunoglobulines polyvalentes permettant ainsi une amélioration à la fois de l'atteinte cutanée et musculaire.

  1. Newtons Universum. Materialien zur Geschichte des Kraftbegriffes.

    NASA Astrophysics Data System (ADS)

    Mit einem Vorwort von E. Seibold und einer Einführung von W. Neuser. This book is a selection of 15 articles published in the journal "Spektrum der Wissenschaft". The original English versions of the papers were first published in "Scientific American". Contents: 1. Impetustheorie und Intuition in der Physik (M. McCloskey). 2. Mittelalterliche Ursprünge der industriellen Revolution (T. S. Reynolds). 3. Leonardo da Vincis Beiträge zur theoretischen Mechanik (V. Foley, W. Soedel). 4. Nikolaus Kopernikus und Tycho Brahe (O. Gingerich). 5. Keplers Entdeckung der ersten beiden Planetengesetze (C. Wilson). 6. Galileis Entdeckung des Fallgesetzes (S. Drake). 7. Galileis Beobachtung des Neptun (S. Drake, C. T. Kowal). 8. Galileo Galilei und der Schatten des Giordano Bruno (L. S. Lerner, E. A. Gosselin). 9. Der Fall Galilei (O. Gingerich). 10. Newtons Apfel und Galileis "Dialog" (S. Drake). 11. Newtons Gravitationsgesetz - aus Formeln wird eine Idee (I. B. Cohen). 12. Christopher Wren: Astronom und Architekt (H. Dorn, R. Mark). 13. Atomismus und Kräfte in der Geschichte (L. Holliday). 14. Ein Elitezirkel vor 200 Jahren: Die Lunar Society von Birmingham (L. Ritchie-Calder). 15. Sadi Carnot: Technik und Theorie der Dampfmaschine (S. S. Wilson).

  2. Choice of DES: is there a difference?

    PubMed Central

    Kaul, U; Bhatia, V

    2009-01-01

    Restenosis after percutaneous coronary interventions has been a major limitation of this otherwise very well-accepted method of coronary revascularisation. Coronary stents work by scaffolding the intimal flaps and preventing elastic recoil, which was a major problem after balloon angioplasty. The neointimal growth response to stenting contributes significantly to the restenotic process. Randomised studies comparing coronary artery bypass surgery with coronary stenting especially in multivessel disease clearly highlighted this problem. The problem has been greater in magnitude in special subgroups: diabetics, patients with small vessels (≤2.5 mm in diameter), long segments of disease (≥20 mm in length), etc. These limitations of Bare metal stents have been addressed by drug-eluting stents (DESs). Third-generation stents with bioabsorbable polymers like the Biolimus releasing Biomatrix stent have already become available in Europe and parts of Asia. A longer follow-up will prove their long-term safety vis-à-vis first-generation DES. The polymer-free stent with capability of using more than one drug, though very attractive, needs larger multicentric studies before gaining wider acceptance. The fully bioabsorbable stent is yet another promising concept. The feasibility has already been demonstrated, and finer refinements are under way. The future of newer DES thus is very promising, and most of the issues related to first-generation DES are at the threshold of being solved.

  3. Sécurité au-delà des mythes et des croyances

    ScienceCinema

    None

    2011-10-06

    Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l?on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ?

  4. Les Granites des Complexes Annulaires

    NASA Astrophysics Data System (ADS)

    Bowden, Peter

    This book, Manual and Methods 4, published by France's BRGM, together with a mouthwatering preface by R. Black promises much for the student of ring complexes. It consists of four distinct chapters, each divided into a number of subsections, with 52 text figures and 9 tables. Although in reality it is based on a doctoral dissertation concerned with the newly discovered ring structures in Corsica, it is spiced with references to past and present research in Nigeria, and observations from French expeditions to the Kerguelen Islands. There are also brief commentaries on the author's observations in New Hampshire and Massachusetts. The text effectively represents a distillation of knowledge concerned with oversaturated alkaline magmatism in continental and oceanic settings. The book has a good bibliography with English-language scientific literature references up to 1980. While aware that ring-complex compositions can be variable, ranging from calc-alkaline to alkaline, the author restricts his writings to granitic and related rocks of the alkaline and peralkaline spectrum.

  5. Paternité des articles et intérêts concurrents : une analyse des recommandations aux auteurs des journaux traitant de pratique pharmaceutique

    PubMed Central

    Courbon, Ève; Tanguay, Cynthia; Lebel, Denis; Bussières, Jean-François

    2014-01-01

    RÉSUMÉ Contexte : La présence d’auteurs honorifiques et fantômes ainsi que les intérêts concurrents représentent des difficultés bien documentées, liées à la publication d’articles scientifiques. Il existe des lignes directrices encadrant la rédaction et la publication de manuscrits scientifiques, notamment celles de l’International Committee of Medical Journal Editors (ICMJE). Objectifs : L’objectif principal de cette étude descriptive et transversale visait à recenser les instructions portant sur la paternité des articles et les intérêts concurrents provenant des recommandations aux auteurs des journaux traitant de pratique pharmaceutique. L’objectif secondaire visait à déterminer des mesures correctrices pour une paternité des articles plus transparente. Méthode : La recherche a débuté par l’identification des journaux traitant de pratique pharmaceutique. La consultation des instructions aux auteurs des journaux a permis ensuite de recenser les recommandations destinées à éviter les problèmes de paternité des articles et d’intérêts concurrents. Finalement, les membres de l’équipe de recherche se sont consultés afin de définir des mesures correctrices possibles à l’intention des chercheurs. Résultats : Des 232 journaux traitant de pharmacie, 33 ont été définis comme traitant de pratique pharmaceutique. Un total de 24 (73 %) journaux mentionnaient suivre la politique de l’ICMJE, 14 (42 %) demandaient aux auteurs de remplir un formulaire de déclaration d’intérêts concurrents au moment de la soumission de l’article, 17 (52 %) présentaient une définition de la qualité d’auteur et 5 (15 %) demandaient de détailler les contributions de chaque auteur. Une grille de 40 critères a été élaborée pour définir l’attribution du statut d’auteur. Conclusion : Moins de la moitié des journaux demandait aux auteurs de transmettre un formulaire de déclaration des intérêts concurrents au moment de la

  6. Electrode compositions

    DOEpatents

    Block, J.; Fan, X.

    1998-10-27

    An electrode composition is described for use as an electrode in a non-aqueous battery system. The electrode composition contains an electrically active powder in a solid polymer and, as a dispersant, a C{sub 8}-C{sub 15} alkyl capped oligomer of a hexanoic acid that is electrochemically inert at 2.5--4.5 volts.

  7. Electrode compositions

    DOEpatents

    Block, Jacob; Fan, Xiyun

    1998-01-01

    An electrode composition for use as an electrode in a non-aqueous battery system. The electrode composition contains an electrically active powder in a solid polymer and, as a dispersant, a C.sub.8 -C.sub.15 alkyl capped oligomer of a hexanoic acid that is electrochemically inert at 2.5-4.5 volts.

  8. Traitement des fractures des plateaux externes par vissage percutané assisté par arthroscopie

    PubMed Central

    Abouchane, Merouane; Belmoubarik, Amine; Benameur, Hamza; Haddoun, Ahmed Reda; Nechad, Mohammed

    2015-01-01

    Le but de notre étude est d'évaluer les résultats de fractures des plateaux tibiaux externes traitées par ostéosynthèse percutanée assistée par arthroscopie. Dix patients (8 hommes et 2 femmes) de 32 ans en moyenne ont subi cette intervention afin de réparer des fractures des plateaux tibiaux Schatzker I-III. Après avoir appliqué un garrot pneumatique, nous avons réduit et fixé la fracture au moyen de vis cannelées souschondrales. Lésions associées retrouvent deux lésions partielles du ménisque externe ont été retrouvé, traitées par résection partielle. Une orthèse de genou été de mise à but antalgique et protectrice pendant six semaines avec béquillage et interdiction de l'appui pour une durée de douze semaines avec reprise d'appui partiel au delà. La durée d'hospitalisation été d'une moyenne de cinq jours. La rééducation passive a été commence le lendemain de l'intervention et continuait dans chez un kinésithérapeute à la sortie du patient du service. Le suivi été à J7, J15, 1mois, 3mois, 6 mois puis tous les 6 mois. Neuf de nos patients ont été revu régulièrement sauf un perdu de vue. Le recul moyen de notre série été de 16 mois (10 et 24 mois). Le score de Lysholm a été utilisé pour évaluer les résultats cliniques chez nos neuf patients: excellent chez trois patients bons chez trois moyen chez un seul et mauvais chez deux patients. Tous nos neuf patients ont consolidé (figure 10 contrôle scopique d un article). Aucune gonarthrose n'a été note chez nos neuf patients due essentiellement au recul moyen faible de 16 mois. Le traitement des fractures des plateaux tibiaux externes assisté par arthroscopie produit des résultats satisfaisants et peut être accepté comme solution de rechange efficace au traitement des fractures des plateaux tibiaux causées par un choc de faible énergie. PMID:26587137

  9. Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

    NASA Astrophysics Data System (ADS)

    Savard, Stephane

    Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele

  10. Interpretation des donnees de flux de chaleur et de gravite dans le bouclier Canadien

    NASA Astrophysics Data System (ADS)

    Cheng, Li Zhen

    2000-10-01

    Le champ geothermique du Bouclier Canadien est caracterise par un flux moyen de 41 mW·m-2, qui suggere une production de chaleur moyenne dans la croute comprise entre 0.7 et 0.8 muW·m-3. Le flux de chaleur relativement faible favorise la stabilite du bouclier et lui a permis de resister a la deformation tectonique. Les variations du flux de chaleur a la surface sont dominees par la composition de la croute. Un flux eleve implique generalement une composition felsique et il est d'autant plus faible que la croute devient plus mafique. La production de chaleur en surface n'est pas representative de la production moyenne de la croute. Le flux de chaleur dans le Boucher Canadien ne depend donc pas de la production de chaleur en surface, mais depend de la composition principale de la croute. L'interpretation combinee des donnees geophysiques nous permet de determiner les variations de composition d'echelle crustale a partir desquelles il est possible d'etablir la structure de la croute. L'etude detaillee de l'Orogene de Trans-Hudson et de la Sous-province d'Abitibi a montre que le flux de chaleur, la gravite et la sismique lorsqu'elles sont combinees fournissent des contraintes efficaces pour determiner l'architecture crustale. En general, la croute est trop resistante pour se deformer par fluage, excepte tres localement. Le mode de deformation de la lithosphere continentale depend de la composition et du gradient geothermique. Nous montrons que la lithosphere du Bouclier Canadien demeure principalement fragile jusqu'a une profondeur de plus de 150 km. Une deformation ductile pourrait cependant etre possible localement a la base de la, croute, comme dans la ceinture de Thompson par exemple. Si l'on admet que la lithosphere peut resister a des contraintes allant jusqu'a 20 MPa (taux de deformation 3˙ < 10-15 s-1), l'epaisseur de la lithosphere est de l'ordre de 300 km pour la ceinture de Thompson et est superieure a 300 km pour la sous-province d'Abitibi. La resistance

  11. Les neuropeptides gastro-intestinaux cibles des effets des rayonnements ionisants : altérations fonctionnelles

    NASA Astrophysics Data System (ADS)

    Linard, C.; Esposito, V.; Wysocki, J.; Griffiths, N. M.

    1998-04-01

    The symptoms associated with exposure to ionizing radiation are nausea, vomiting, diarrhoea. The response of the gut is complex involving modifications of motility and fluid and electrolyte transport. Gastrointestinal regulatory peptides have an important role in these functions. This study showed that radiation-induced tissue variations of neuropeptides have some repercussions on intestinal biological activity of these peptides soon after irradiation. In addition such modifications are also seen a few years after irradiation. Les symptômes associés à l'exposition aux rayonnements ionisants sont des nausées, vomissements et diarrhées. La réponse du système digestif est complexe, impliquant des modifications de la motilité et du transport d'eau et d'électrolytes. les neuropeptides gastro-intestinaux ont un rôle important dans ces fonctions. Cette étude montre que les variations tissulaires de ces neuropeptides induites par l'irradiation ont des répercussions sur l'activité biologique intestinale pour des temps précoces mais que ces perturbations sont encore visibles quelques années après l'irradiation.

  12. Vers des boites quantiques a base de graphene

    NASA Astrophysics Data System (ADS)

    Branchaud, Simon

    Le graphene est un materiau a base de carbone qui est etudie largement depuis 2004. De tres nombreux articles ont ete publies tant sur les proprietes electroniques, qu'optiques ou mecaniques de ce materiel. Cet ouvrage porte sur l'etude des fluctuations de conductance dans le graphene, et sur la fabrication et la caracterisation de nanostructures gravees dans des feuilles de ce cristal 2D. Des mesures de magnetoresistance a basse temperature ont ete faites pres du point de neutralite de charge (PNC) ainsi qu'a haute densite electronique. On trouve deux origines aux fluctuations de conductance pres du PNC, soit des oscillations mesoscopiques provenant de l'interference quantique, et des fluctuations dites Hall quantique apparaissant a plus haut champ (>0.5T), semblant suivre les facteurs de remplissage associes aux monocouches de graphene. Ces dernieres fluctuations sont attribuees a la charge d'etats localises, et revelent un precurseur a l'effet Hall quantique, qui lui, ne se manifeste pas avant 2T. On arrive a extraire les parametres caracterisant l'echantillon a partir de ces donnees. A la fin de cet ouvrage, on effectue des mesures de transport dans des constrictions et ilots de graphene, ou des boites quantiques sont formees. A partir de ces mesures, on extrait les parametres importants de ces boites quantiques, comme leur taille et leur energie de charge.

  13. Peste des Petits Ruminants Virus in Heilongjiang Province, China, 2014

    PubMed Central

    Wang, Miao; Wang, Shida; Liu, Zaisi; Shen, Nan; Si, Wei; Sun, Gang; Drewe, Julian A.; Cai, Xuehui

    2015-01-01

    During March 25–May 5, 2014, we investigated 11 outbreaks of peste des petits ruminants in Heilongjiang Province, China. We found that the most likely source of the outbreaks was animals from livestock markets in Shandong. Peste des petits ruminants viruses belonging to lineages II and IV were detected in sick animals. PMID:25811935

  14. Altération des sulfures des granulats dans les chaussées

    NASA Astrophysics Data System (ADS)

    Jigorel, A.; Jauberthie, R.

    2002-07-01

    Sulfides present in hornsfeld aggregates, used in light pavanent construction in contact with humid air alter rapidly. Crystallisation of sulfates at the interface of bitumastic material and sub-base creates serious problems (intumescence and crazing) that can lead to a total reconstruction of the project (roads, sidewalks, sports areas, etc). The sulfides in the aggregates and the sulfates produced due to alteration are studied by SEM and XRD. The results show that the intensity of this phenomenon is linked to the nature and the crystallinity of the sulfides. The evolution of the sulfates formed during this alteration process is slow and complex. In new pavements (3 years) the sulfates have a pulverised appearance and consist mostly of epsomite, associated with pickeringite and halotrichite. In older pavements (20 years) the sulfates form a fibrous concretion consisting of pickeringite and small quantities of halotrichite. Les sulfures présents dans les granulats élaborés à partir de cornéen nes s'altèrent rapidement dans les chaussées légères en présence d'air humide. La cristallisation des sulfates à l'interface enrobé-couche de fondation crée des désordres si importants (intumescences, faiençage) qu'il est bien souvent nécessaire d'assurer la réfection totale des ouvrages (routes, trottoirs, plateaux sportifs...). Les sulfures des granulats et les sulfates issus du processus d'altération ont été étudiés par diffractométrie X et examen su Microscope Electronique à Balayage équipé de microanalyse X. Les résultats montrent que !intensité des désordres est liée à la nature et à la cristallinité des sulfures. Les sulfates formés évoluent su cours du processus d'altération qui est long et complexe. Dans les chaussées récentes (3 ans) ils ont un aspect pulvérulent et sont constitués d'epsomite dominante associée à de la pickeringite et à de l'halotrichite. Dans les chaussées plus anciennes (20 ans) ils forment des concr

  15. Comparing Composites.

    ERIC Educational Resources Information Center

    Mathras, Michael S.

    1993-01-01

    Presents an activity that models the work of chemical engineers. Students design, fabricate, and perform mechanical tests on plaster matrix composites and compare the strength to mass ratios of several products. (PR)

  16. Fuel composition

    SciTech Connect

    Johnson, T.H.

    1990-06-26

    This patent describes a motor fuel composition. It comprises: a mixture of hydrocarbons in the gasoline boiling range containing a deposit preventing or reducing effective amount of poly(olefin)-N-substituted- carbamate.

  17. Hydride compositions

    DOEpatents

    Lee, Myung W.

    1995-01-01

    A composition for use in storing hydrogen, and a method for making the composition. The composition comprises a mixture of two or more hydrides, each hydride having a different series of hydrogen sorption isotherms that contribute to the overall isotherms of the mixture. The hydrides are chosen so that the isotherms of the mixture have regions wherein the hydrogen equilibrium pressure increases with increasing hydrogen, preferably linearly. The isotherms of the mixture can be adjusted by selecting hydrides with different isotherms and by varying the amounts of the individual hydrides, or both. Preferably, the mixture is made up of hydrides that have isotherms with substantially flat plateaus and in nearly equimolar amounts. The composition is activated by degassing, exposing to hydrogen and then heating at a temperature below the softening temperature of any of the. constituents so that their chemical and structural integrity is preserved. When the composition is used to store hydrogen, its hydrogen content can be found simply by measuring P.sub.H.sbsb.2 and determining H/M from the isothermic function of the composition.

  18. Hydride compositions

    DOEpatents

    Lee, Myung, W.

    1994-01-01

    Disclosed are a composition for use in storing hydrogen and a method for making the composition. The composition comprises a mixture of two or more hydrides, each hydride having a different series of hydrogen sorption isotherms that contribute to the overall isotherms of the mixture. The hydrides are chosen so that the isotherms of the mixture have regions wherein the H equilibrium pressure increases with increasing hydrogen, preferably linearly. The isotherms of the mixture can be adjusted by selecting hydrides with different isotherms and by varying the amounts of the individual hydrides, or both. Preferably, the mixture is made up of hydrides that have isotherms with substantially flat plateaus and in nearly equimolar amounts. The composition is activated by degassing, exposing to H, and then heating below the softening temperature of any of the constituents. When the composition is used to store hydrogen, its hydrogen content can be found simply by measuring P{sub H}{sub 2} and determining H/M from the isothermic function of the composition.

  19. Fissuration en relaxation des aciers inoxydables austénitiques au voisinage des soudures

    NASA Astrophysics Data System (ADS)

    Auzoux, Q.; Allais, L.; Gourgues, A. F.; Pineau, A.

    2003-03-01

    Des fissures intergranulaires peuvent se développer au voisinage des soudures des aciers inoxydables austénitiques lorsqu'ils sont réchauffés dans le domaine de température compris entre 500^{circ}C et 700^{circ}C. A ces températures, les contraintes résiduelles post-soudage se relaxent par déformation viscoplastique. Il peut arriver que ces zones proches de la soudure soient tellement fragiles, qu'elles ne puissent accommoder cette faible déformation. Afin de préciser quelles peuvent être les modifications microstructurales qui conduisent à une telle fragilisation, on a examiné les microstructures de ces zones et révélé ainsi un écrouissage résiduel, responsable d'une forte élévation de la dureté. On a pu reproduire par hypertrempe puis laminage entre 400^{circ}C et 600^{circ}C une microstructure similaire. Des essais mécaniques (traction, fluage, relaxation, sur éprouvettes lisses et pré-fissurées) ont été réalisés à 550^{circ}C et à 600^{circ}C sur ces zones affectées simulées et sur un état de référence hypertrempé. Ils ont montré que l'écrouissage diminuait la ductilité dans le domaine de rupture intergranulaire, sans modifier qualitativement le mécanisme d'endommagement. Pendant la pré-déformation les incompatibilités de déformation entre grains conduiraient à l'existence de contraintes locales élevées qui favoriseraient la germination des cavités intergranulaires.

  20. Hans Bethe : Des etoiles a la bombe

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    1996-06-01

    Il comprit le premier comment brillent les etoiles. Il fut aussi de cette poignee de scientifiques qui, dans le secret de Los Alamos, mirent au point la tristement celebre bombe atomique. Hans Bethe est l'un des derniers geants qui auront marque la physique de ce siecle d'une empreinte indelebile. C'est dans le bureau 01 du prestigieux laboratoire Kellog de l'institut Caltech qu'il a bien voulu retracer pour nous son impressionnante carriere, et revenir sur les motivations qui ont guide ses pas.

  1. Le traitement familial des enfants et des adolescents anorexiques : Des lignes directrices pour le médecin communautaire

    PubMed Central

    Findlay, S; Pinzon, J; Taddeo, D; Katzman, DK

    2010-01-01

    L’anorexie mentale (AM) est une maladie grave qui met la vie en danger et qui fait généralement son apparition pendant l’adolescence. Les données probantes au sujet du traitement optimal de l’AM chez les enfants et les adolescents sont en croissance, mais il reste beaucoup à apprendre. Même si les démarches thérapeutiques actuelles varient au Canada et ailleurs, les données jusqu’à présent indiquent que le traitement familial (TF) est le plus efficace pour les enfants et les adolescents anorexiques. Un élément essentiel du modèle de TF, c’est que les parents sont investis de la responsabilité de rétablir la santé physique de leur enfant et de s’assurer de la reprise complète de son poids. Le médecin qui comprend les principes fondamentaux et la philosophie du TF peut mettre en place les éléments de cette intervention fondée sur des faits probants auprès des jeunes patients anorexiques et de leur famille.

  2. Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

    NASA Astrophysics Data System (ADS)

    Metiche, Slimane

    La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference

  3. Photoimageable composition

    DOEpatents

    Dentinger, Paul; Krafick, Karen L.; Simison, Kelby Liv

    2005-02-22

    The use of photoacid generators including an alkoxyphenylphenyliodonium salt and/or bis(t-butylphenyl)iodonium salt in a photoimageable composition helps improve resolution. Suitable photoimageable compositions includes: (a) a multifuctional polymeric epoxy resin that is dissolved in an organic solvent wherein the epoxy resin comprises oligomers of bisphenol A that is quantitatively protected by glycidyl ether and wherein the oligomers have an average functionality that ranges from about 3 to 12; and a photoacid generator comprising an alkoxyphenylphenyliodonium salt and/or bis(t-butylphenyl)iodonium salt. Preferred alkoxyphenylphenyliodonium salts include 4-octyloxyphenyl phenyliodonium hexafluoroantimonate and 4-methoxyphenyl phenyliodonium hexafluoroantimonate. The photoimageable composition is particularly suited for producing high aspect ratio microstructures.

  4. Photoimageable composition

    DOEpatents

    Simison, Kelby Liv; Dentinger, Paul

    2003-11-11

    The use of selected buffering amines in a photoimageable composition prevents process bias which with conventional photoresists causes designed features to be distorted, especially in corners and high resolution features. It is believed that the amines react with the catalysts, e.g., photoacids, generated to create an inert salt. The presence of the amines also increases resolution. Suitable photoimageable compositions includes: (a) a multifunctional polymeric epoxy resin that is dissolved in an organic solvent wherein the epoxy resin comprises oligomers of bisphenol A that is quantitatively protected by glycidyl ether and wherein the oligomers have an average functionality that ranges from about 3 to 12; (b) a photoactive compound; and (c) an amine that is selected from the group consisting of triisobutylamine, 1,8-bis(dimethylamino)naphthalene (also known as PROTON SPONGET.TM.), 2,2'-diazabicyclo[2.2.2] octane and mixtures thereof. The photoimageable composition is particularly suited for producing high aspect ratio metal microstructures.

  5. Composite material

    DOEpatents

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O'Neill, Hugh M.

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  6. Surfactant compositions

    SciTech Connect

    Novakovic, M.; Abend, P.G.

    1987-09-29

    A surfactant composition is described for subsequent addition to a soap slurring comprising an acyloxy alkane sulfonate salt. The sulfonate salt is present in an amount by weight of about 44 percent of about 56 percent. The polyol is present in an amount by weight of about 2 percent to about 6 percent, and water is present in an amount by weight of 26 to 36 percent. The composition constituting a solid reversible solution at ambient temperature and having a solids content of about 58 to 72 percent, whereby subsequent addition of the surfactant composition to a soap slurry results in formation of a soap/detergent bar having a smooth texture, uniform wear properties and a lack of grittiness.

  7. Potentiel des images satellitaires multibandes a haute resolution spatiale pour la cartographie des componsants de l'eau en milieu cotier marin

    NASA Astrophysics Data System (ADS)

    Lavoie, Andre

    L'objectif principal que que nous poursuivons est de developper un modele de simulation du transfert radiatif eau-atmosphere adapte aux observations faites par le capteur Thematic Mapper (TM) de Landsat. Les informations que nous cherchons ont trait au milieu cotier marin et concernent les elements qui sont en suspension dans l'eau. Les images multibandes du capteur TM dans la partie visible du spectre, sont surtout visees par nos travaux. A la base de la simulation, nous utilisons un programme de simulation atmospherique, le code 6S, auquel nous greffons un modele de simulation du transfert radiatif dans la masse d'eau. Ce dernier estime le signal en fonction de 4 composants: l'eau, les pigments chlorophylliens (chlorophylle et phaeopigments), les matieres minerales et les substances organiques dissoutes. La concentration des differents composants sert de parametre d'entree pour definir le comportement optique de la masse d'eau. Le modele permet egalement de simuler une masse d'eau stratifiee si l'on connai t les concentrations des composants dans les differentes couches. Il inclut aussi la contribution du fond, selon sa nature et sa composition, ainsi que celle du miroitement du soleil et du ciel a la surface de l'eau. Les informations d'un echantillonnage de la masse d' eau synchronise avec le passage du satellite, a la baie des Chaleurs, d'une cartographie du couvert d'algues et d'un modele bathymetrique ont ete utilisees pour fixer les parametres de simulation par le modele. La comparaison montrent que le modele se comporte relativement bien surtout dans la bande TM2. Une erreur systematique de 2 valeurs numeriques en moyenne subsiste dans les trois bandes spectrales. Les resultats nous montrent que la visibilite du fond aux faibles profondeurs est un element tres important a considerer. Par ailleurs, l'analyse de sensibilite montre que les images TM sont plus sensibles aux concentrations en matieres minerales qu'aux pigments chlorophylliens et aux substances

  8. Physical composition

    NASA Astrophysics Data System (ADS)

    Healey, Richard

    2013-02-01

    Atomistic metaphysics motivated an explanatory strategy which science has pursued with great success since the scientific revolution. By decomposing matter into its atomic and subatomic parts physics gave us powerful explanations and accurate predictions as well as providing a unifying framework for the rest of science. The success of the decompositional strategy has encouraged a widespread conviction that the physical world forms a compositional hierarchy that physics and other sciences are progressively articulating. But this conviction does not stand up to a closer examination of how physics has treated composition, as a variety of case studies will show.

  9. Composite Riflescope

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Bushnell Division of Bausch & Lomb's Armor-Sight riflescope combines the company's world-renowned optics with a graphite composite (Graphlon VI) developed for space applications. The riflescope is 10 percent lighter than aluminum scopes, and, because its thermal expansion coefficient is near zero, optical distortion from heat and cold extremes is eliminated. It is fogproof and waterproof; advanced multicoated optics provide maximum light transmission to brighten target ranges. Bushnell was assisted by NIAC/USC in searching for technical information on graphic composites and in overcoming difficulties with bonding and porosity.

  10. Composite Cores

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Spang & Company's new configuration of converter transformer cores is a composite of gapped and ungapped cores assembled together in concentric relationship. The net effect of the composite design is to combine the protection from saturation offered by the gapped core with the lower magnetizing requirement of the ungapped core. The uncut core functions under normal operating conditions and the cut core takes over during abnormal operation to prevent power surges and their potentially destructive effect on transistors. Principal customers are aerospace and defense manufacturers. Cores also have applicability in commercial products where precise power regulation is required, as in the power supplies for large mainframe computers.

  11. COMPOSITE ELEMENT

    DOEpatents

    Schaner, B.E.; Wolfe, R.A.

    1962-12-18

    Composite fuel eiements of the sandwich type are reported. The invention resides in the use of a layer of graphite on the interfaces of the flssile material and the cladding to prevent interdiffusion of the fissile material and the ciadding material. (AEC)

  12. Music Composition

    ERIC Educational Resources Information Center

    Helfer, Jason A.

    2015-01-01

    Historically, music programs in K-12 schools have emphasized performance opportunities for children and young people. Until the release of the 1994 National Standards in Music, targeted instruction in composition was frequently overlooked due to the emphasis on performance as well as the expectations of what a school music program ought to produce…

  13. Phosphorescent compositions, methods of making the compositions, and methods of using the compositions

    DOEpatents

    Jia, Weiyi; Wang, Xiaojun; Jia, George D.; Lewis, Linda; Yen, Laurel C.

    2014-06-24

    Compositions, methods of making compositions, materials including compositions, crayons including compositions, paint including compositions, ink including compositions, waxes including compositions, polymers including compositions, vesicles including the compositions, methods of making each, and the like are disclosed.

  14. Phosphorescent compositions, methods of making the compositions, and methods of using the compositions

    DOEpatents

    Jia, Weiyi; Wang, Xiaojun; Yen, William; Yen, Laurel C.; Jia, George D.

    2012-12-04

    Compositions, methods of making compositions, materials including compositions, crayons including compositions, paint including compositions, ink including compositions, waxes including compositions, polymers including compositions, vesicles including the compositions, methods of making each, and the like are disclosed.

  15. OzDES Spectroscopic Classification of DES13X3woy

    NASA Astrophysics Data System (ADS)

    Yuan, F.; Childress, M.; Sharp, R.; Lidman, C.; Parkinson, D.; Mould, J.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; D'Andrea, C.; Nichol, R.; Papadopoulos, A.; Sullivan, M.; Maartens, R.; Smith, M.; Barbary, K.; Bernstein, J. P.; Biswas, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Bloom, J. S.; Goldstein, D.; Kim, A.; Nugent, P.; Perlmutter, S.; Thomas, R. C.; Foley, R. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Covarrubias, R. A.; Cane, R.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.

    2014-01-01

    We report spectroscopic classification by OzDES of a supernova discovered by the Dark Energy Survey (ATel #4668). The spectrum (370-885nm) was obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT). Object classification was performed using superfit (Howell and Wang, 2002, BAAS, 34, 1256), the details of which are reported in the table below.

  16. Détermination des paramètres bioécologiques et entomologiques d’Anopheles gambiae sl dans la transmission du paludisme à Bandundu-ville, République Démocratique de Congo

    PubMed Central

    Matubi, Emery Metelo; Bukaka, Eric; Luemba, Trésor Bakambana; Situakibanza, Hyppolite; Sangaré, Ibrahim; Mesia, Gauthier; Ngoyi, Dieudonné Mumba; Maniania, Nguya Kalemba; Akikwa, Charles Ngandote; Kanza, Jean Pierre Basilua; Tamfum, Jean-Jacques Muyembe; sudi, Jonas Nagahuedi Bongo

    2015-01-01

    Introduction La présente étude a été menée à Bandundu-ville (RDC) en vue d'identifier les paramètres écologiques et entomologiques modulant la transmission du paludisme ainsi que leur tendance saisonnière dans cette agglomération. Méthodes Cette étude a été réalisée dans la période du 1er juin au 31 décembre 2011. Des prospections des gîtes larvaires d'anophèles avec récolte ont été réalisées, les paramètres physiques, physico-chimiques et environnementaux déterminés. La densité larvaire a été estimée selon une échelle de classes de densité, inspirée de la méthode de Carron pour chaque type de gîtes. Quarante-huit maisons ont été sélectionnées et prospectées pour la récolte des moustiques par pulvérisation intradomicilaire. L'identification des moustiques a été faite sur base des critères morphologiques de Gilles et Demeillon. L'Indice sporozoïtique (Is) a été déterminé par le test ELISA CSP de Plasmodium falciparum à l'Institut National de Recherche Biomédicale selon le protocole de Robert Wirtz. Les autres paramètres entomologiques comme la densité, le taux d'agressivité, le taux d'inoculation entomologique (TIE) ainsi que l'indice de stabilité ont été déterminés selon le protocole de l'OMS. La régression linéaire a été réalisée au seuil de signification de 0,05 pour identifier les déterminants de la densité larvaire. Résultats Cent-sept gîtes larvaires ont été identifiés et caractérisés en 5 types (digues et puits d'eau, collections d'eau maraîchère et concasseurs moellons, marais Régie de distribution d'eau, marais le long des rivières et ruisseaux et flaques d'eau de pluies). La densité larvaire moyenne a été de 117,4±64,1. Quatre mille cinq cents quatre-vingt-huit moustiques ont été capturés et identifiés, parmi lesquels 1.258 Anopheles gambiae sl avec une densité de 8,86, un taux d'agressivité de 1,55 piqûre par homme par nuit, l'Is de 5,6%, un TIE de 0,085 piq

  17. Prise en compte des ``courants de London'' dans la modélisation des supraconducteurs

    NASA Astrophysics Data System (ADS)

    Bossavit, Alain

    1997-10-01

    A model is given, in variational form, in which volumic “Bean currents”, ruled by Bean's law, and surface “London currents” coexist. This macroscopic model generalizes Bean's one, by appending to the critical density j_c a second parameter, with the dimension of a length, similar to London's depth λ. The one-dimensional version of the model is investigated, in order to link this parameter with the standard observable H-M characteristics On propose un modèle, sous forme variationnelle, associant des “courants de Bean” volumiques, décrits par la loi de Bean, et des “courants de London”, surfaciques. Ce modèle macroscopique généralise celui de Bean, caractérisé par le courant critique j_c, et fait intervenir un second paramètre, homogène à une longueur, analogue au λ de London. La version unidimensionnelle du modèle est étudiée en détail de manière à relier ce paramètre à l'observation des caractéristiques H-M usuelles.

  18. Characterization of the Glycosyltransferase DesVII and Its Auxiliary Partner Protein DesVIII in the Methymycin/Pikromycin Biosynthetic Pathway†

    PubMed Central

    Borisova, Svetlana A.; Liu, Hung-wen

    2010-01-01

    The in vitro characterization of the catalytic activity of DesVII, the glycosyltransferase involved in the biosynthesis of the macrolide antibiotics methymycin, neomethymycin, narbomycin, and pikromycin in Streptomyces venezuelae, is described. DesVII is unique among glycosyltransferases in that it requires an additional protein component, DesVIII, for activity. Characterization of the metabolites produced by a S. venezuelae mutant lacking desVIII gene confirmed that desVIII is important for the biosynthesis of glycosylated macrolides, but can be replaced by at least one of the homologous genes from other pathways. The addition of recombinant DesVIII protein significantly improves the glycosylation efficiency of DesVII in the in vitro assay. When affinity-tagged DesVII and DesVIII proteins were co-produced in E. coli, they formed a tight (αβ)3 complex that is at least 103-fold more active than DesVII alone. The formation of the DesVII/DesVIII complex requires co-expression of both genes in vivo and cannot be fully achieved by mixing the individual protein components in vitro. The ability of DesVII/DesVIII system to catalyze the reverse reaction with the formation of TDP-desosamine was also demonstrated in a transglycosylation experiment. Taken together, our data suggest that DesVIII assists the folding of DesVII during protein production and remains tightly bound during catalysis. This requirement must be taken into consideration in the design of combinatorial biosynthetic experiments of new glycosylated macrolides. PMID:20695498

  19. Organisation des gesundheitlichen Verbraucherschutzes auf Bundesebene

    NASA Astrophysics Data System (ADS)

    Tschiersky-Schöneburg, Helmut; Büttner, Antje

    Zahlreiche Krisen wie Dioxin belastete Futtermittel, die missbräuchliche Verwendung von Antibiotika in der Schweinemast und nicht zuletzt das Auftreten von BSE in Deutschland erschütterten Ende der neunziger Jahre das Vertrauen der Bürger in die Sicherheit der Lebensmittel. Mit dem Weißbuch zur Lebensmittelsicherheit, das im Januar 2000 herausgegeben wurde, hatte die Europäische Kommission ihre Erfahrungen aus dem BSE-Geschehen in ein neues Konzept für den Verbraucherschutz eingearbeitet. Kernstücke des Konzepts sind die ganzheitliche Betrachtung der Lebensmittelsicherheit von der landwirtschaftlichen Erzeugung bis zum Verzehr und der Anspruch nach Transparenz und Unabhängigkeit der Risikobewertung.

  20. Formation et Evolution des Quasars et Contraintes cosmologiques

    NASA Astrophysics Data System (ADS)

    Hatziminaoglou, Evanthia

    2000-06-01

    Cette thèse porte sur l'étude de l'évolution des quasars. Elle en aborde certains aspects théoriques et observationnels, ainsi que la construction des grands échantillons de quasars dans le but à long terme de combiner le tout dans un test cosmologique géométrique pour déterminer les valeurs des paramètres cosmologiques Omega et Lambda. Les paramètres cosmologiques Omegaspan>et Lambdaspan>décrivent la géométrie globale de l'Univers. En faisant des hypothèses raisonnables sur la distribution spatiale et l'évolution des objets astrophysiques (galaxies, amas des galaxies, quasars), on peut déterminer les valeurs de ces paramètres qui sont cohérentes avec ces hypothèses. Les tests cosmologiques traditionnels ont besoin de ''chandelles standards'', objets dont les propriétés intrinsèques sont indépendantes des distances. De tels objets sont probablement fictifs. Néanmoins, certains de ces tests cosmologiques peuvent être adaptés si l'évolution individuelle, ou au moins l'évolution statistique d'une population d'objets est connue. La question de la nature de l'évolution des quasars a très vite été posée et des réponses ''phénoménologiques'' ont d'abord été données. Ces réponses ne faisaient que donner une forme mathématique à l'évolution mais n'expliquaient rien de la physique duphénomène. Les premières tentatives de construction d'un modèle physique, liées au processus d'accrétion sur un trou noir et à la théorie de la formation de l'Univers ont commencé à la fin des années 80. Depuis, des dizaines de modèles tentent d'expliquer les observations, qui sont les résultats de l'étude d'objets de plus en plus nombreux. Au cours de cette thèse, le test V/Vmax a été appliqué sur l'échantillon du Large Bright Quasar Survey en montrant 1) que l'échantillon était biaisé à cause des critères de sélection et 2) que la (simple) loi de Pure Evolution en Luminosité n'était pas une bonne approximation à tout

  1. Discovery and Classification of DES15S2kqw

    NASA Astrophysics Data System (ADS)

    Kasai, E.; Bassett, B.; Crawford, S.; Kniazev, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.

    2015-10-01

    We report optical spectroscopy of DES15S2kqw discovered by the Dark Energy Survey. The spectrum (380-820nm) was obtained using the Robert Stobie Spectrograph (RSS) on the South African Large Telescope (SALT).

  2. La détermination des distances: Sol, Hipparcos, GAIA.

    NASA Astrophysics Data System (ADS)

    Turon, C.

    Les parallaxes trigonométriques des étoiles les plus proches du soleil sont la base de la détermination des distances dans l'Univers. Elles permettent, par la calibration en luminosité des différents indicateurs de distance d'étalonner les distances d'abord dans notre Galaxie, puis dans les galaxies du Groupe Local, puis pour les galaxies plus lointaines. Cette base est, actuellement, très mince, et peu de types d'étoiles y sont représentés. Hipparcos va déjà apporter une amélioration sensible. Avec GAIA une révision complète des calibrations de luminosité de tous les indicateurs "primaires" serait directement possible.

  3. Les calculs urinaires de l'enfant au Burkina Faso: à propos de 67 cas

    PubMed Central

    Ouédraogo, Isso; Napon, Aïcha Madina; Bandré, Emile; Ouédraogo, Francis Somkieta; Tapsoba, Wendlamita Toussaint; Wandaogo, Albert

    2015-01-01

    L'objectif de cette étude est de déterminer la fréquence, de décrire les circonstances de découverte, les signes cliniques et paracliniques, la composition chimique des calculs prélevés et les difficultés rencontrées dans le traitement des lithiases urinaires. Notre étude a été rétrospective sur une période de six ans (janvier 2005 à décembre 2010) et a eu pour cadre le CHUP-CDG et a concerné 67 patients âgés de moins de 15 ans opérés pour lithiases urinaires. Les calculs de la dernière année au nombre de douze ont fait l'objet d'une analyse spectrophotométrique. La lithiase urinaire figure parmi les dix premières pathologies du service de chirurgie et représente 1,32% des hospitalisations. L’âge moyen de nos patients est de deux ans et varie de 6 mois à 14 ans. La symptomatologie de la lithiase urinaire est polymorphe. Le diagnostic des lithiases urinaires a été essentiellement radiologique (ASP) dans 87, 50 des cas. Les localisations les plus fréquentes sont: vésicales (49,25%) et pyéliques (46,26%). L'ECBU a révélé une infection urinaire chez 9 patients. Les germes le plus fréquemment rencontrés sont: Klebsiella pneumoniae pneumoniae (22,22%) et staphyloccocus aureus (22,22%). Les difficultés du traitement sont dues à la modicité de nos moyens diagnostiques et à la nature chimique des calculs et le traitement a été dans tous les cas chirurgical. La composition chimique est dominée par les sels calciques notamment les oxalates, les phosphates et les carbonates. PMID:26175840

  4. Physical characteristics of stream subbasins in the Des Moines River, Upper Des Moines River, and East Fork Des Moines River basins, southern Minnesota and northern Iowa

    USGS Publications Warehouse

    Sanocki, Christopher A.

    2000-01-01

    Data that describe the physical characteristics of stream subbasins upstream from selected sites on streams in the Des Moines River, Upper Des Moines River, and East Fork Des Moines River Basins, located in southwestern Minnesota, and northwestern Iowa, are presented in this report. The physical characteristics are the drainage area of the subbasin, the percentage area of the subbasin covered only by lakes, the percentage area of the subbasin covered by both lakes and wetlands, the main-channel length, and the main-channel slope. Stream sites include outlets of subbasins of at least 5 square miles, and locations of U.S. Geological Survey high-flow, and continuous-record gaging stations.

  5. Rôle des hyrates dans la formation de Titan et des satellites réguliers

    NASA Astrophysics Data System (ADS)

    Mousis, O.

    2001-12-01

    Cette these est dediee a l'etude de l'origine de Titan et de son atmosphere. Dans l'hypothese ou la subnebuleuse de Saturne etait geometriquement mince, le modele de disque turbulent utilise, derive des travaux de Dubrulle (1993), est moins dense que le modele de Prinn et Fegley (1981). De ce fait, les conversions de Co en CH4 et de N2 en NH3 ont ete inhibees dans la subnebuleuse, contrairement a ce qui est couramment admis pour interpreter la presence du methane dans l'atmosphere de Titan. C'est pourquoi nous avons developpe un nouveau scenario de la formation de titan, qui tient compte simultanement des contraintes resultant de la chimie de la subnebuleuse et des abondances de CH4, N2 et CH3D mesurees dans l'atmosphere du satellite. Nous faisons l'hypothese que ces gaz proviennent initialement de la vaporisation du nuage presolaire, qui s'effondra et forma le Soleil et son disque environnant. Lors du refroidissement de la nebuleuse, les volatils auraient ete pieges sous formes de clathrates d'hydrates dans les grains, puis dans les planetesimaux qu'ils formerent. Les planetesimaux hydrates a l'origine de la formation de Titan seraient alors des rescapes de l'effondrement hydsrodynamique de la feeding zone de Saturne. Ce scenario a ete applique aux subnebuleuses de Jupiter et d'Uranus, et a apporte un certain nombre de contraintes sur la formation des satellites reguliers de ces planetes. Le temps et la zone de formation des grains cometaires ont egalement ete estimes dans la nebuleuse solaire. Enfin, l'etude experimentale de la temperature de fusion du dihydrate d'ammoniac dans la gamme des hautes pressions a apporte des nouvelles donnees thermodynamiques qui permettront d'ameliorer les modeles de l'interieur de Titan.

  6. Les sarcomes des tissus mous: à propos de 33 cas

    PubMed Central

    Abdou, Jiddou; Elkabous, Mustapha; M'rabti, Hind; Errihani, Hassan

    2015-01-01

    L'objectif de cette étude est de rapporter les particularités épidémiologiques, cliniques, histologiques, thérapeutiques et évolutives des sarcomes des tissus mous à l'Institut National d'Oncologie et de définir les facteurs influençant la survie des patients. C'est une étude rétrospective de 33 cas de sarcome des tissus mous, colligés entre janvier 2008 et décembre 2010. Les critères d’éligibilité étaient un âge supérieur à 16 ans, une épreuve histologique d'un sarcome des tissus mous à l'exclusion des tumeurs stromales gastro-intestinales (GIST). Les items recueillis étaient: épidémiologiques, cliniques, histologiques, Radiologiques, et thérapeutiques. Des analyses univariées puis multivariées ont été réalisées à la recherche de facteurs influençant la survie à 2 ans. Il s'agit de 33 cas, 17 Hommes et 16 Femmes, l’âge moyen était de 43,21 ans (Extrêmes= 18-76 ans). La tumeur était localisée aux extrémités dans 24 cas (72,72%). Le type histologique prédominant était le Liposarcome dans 9 cas (27,27%). Le stade tumoral était localisé dans 25 cas (75,8%), métastatique dans 8 cas (24,2%). Vingt-cinq tumeurs ont été traitées chirurgicalement dont 21 cas (84%) de chirurgie conservatrice et 4 cas (16%) de chirurgie radicale. La radiothérapie a été réalisée chez 10 patients (30,3%). La chimiothérapie a été faite chez 20 patients. En analyse univariée les facteurs pronostiques étaient l’âge (p=0,03) et le stade tumoral (p=0,09). L’âge et le stade tumoral sont des facteurs pronostiques influençant la survie des sarcomes des tissus mous. PMID:27022434

  7. Caractérisation des convertisseurs matriciels : II. Synthèse des fonctions de connexion

    NASA Astrophysics Data System (ADS)

    François, B.; Cambronne, J. P.; Hautier, J. P.

    1996-05-01

    Knowing the wished conversion levels (-1,0,1) of a power converter, this paper describes a particular method for setting the corresponding states of switches into the matrix converter. In a first step, a mathematical analysis establishes the relations linking the states of switches with the conversion functions. Afterwards, the presented method gives the inverse relations which constitute the sequential part of the converter control. The turn-on and the turn-off sequences are designed by considering the on-line wished level conversions. This general method enhances the idea that a converter functionnality must be defined by its structure and its control. Cet article propose une méthode originale pour définir la séquence de commande d'un convertisseur à partir de la fonction de conversion globalement souhaitée. Les auteurs procèdent d'abord à une analyse mathématique précise des relations qui existent entre les états des interrupteurs et les fonctions de conversion obtenues. À partir de cette analyse, la méthode developpée permet d'établir systématiquement les relations inverses qui constituent alors le module séquentiel de la commande rapprochée du convertisseur. Les ordres d'ouverture et de fermeture des interrupteurs sont élaborés en considérant à tout instant les niveaux de conversion souhaités pour les grandeurs électriques. Cette méthode générale renforce l'idée que la fonction remplie par un convertisseur moderne doit être définie à la fois par sa structure et sa commande.

  8. La planification préalable des soins pour les patients en pédiatrie

    PubMed Central

    2008-01-01

    RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

  9. Concrete compositions and methods

    SciTech Connect

    Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua

    2015-06-23

    Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.

  10. ) Hybrid Composite

    NASA Astrophysics Data System (ADS)

    Show, Bijay Kumar; Mondal, Dipak Kumar; Maity, Joydeep

    2014-12-01

    In this research work, the dry sliding wear behavior of 6351 Al-(4 vol.% SiC + 4 vol.% Al2O3) hybrid composite was investigated at low sliding speed (1 m/s) against a hardened EN 31 disk at different loads. In general, the wear mechanism involved adhesion (along with associated subsurface cracking and delamination) and microcutting abrasion at lower load. While at higher load, abrasive wear involving microcutting and microploughing along with adherent oxide formation was observed. The overall wear rate increased with increasing normal load. The massive particle clusters as well as individual reinforcement particles were found to stand tall to resist abrasive wear. Besides, at higher load, the generation of adherent nodular tribo-oxide through nucleation and epitaxial growth on existing Al2O3 particles lowered down the wear rate. Accordingly, at any normal load, 6351 Al-(4 vol.% SiC + 4 vol.% Al2O3) hybrid composite exhibited superior wear resistance (lower overall wear rate) than the reported wear resistance of monolithic 6351 Al alloy.

  11. De l'importance des orbites periodiques: Detection et applications

    NASA Astrophysics Data System (ADS)

    Doyon, Bernard

    L'ensemble des Orbites Periodiques Instables (OPIs) d'un systeme chaotique est intimement relie a ses proprietes dynamiques. A partir de l'ensemble (en principe infini) d'OPIs cachees dans l'espace des phases, on peut obtenir des quantites dynamiques importantes telles les exposants de Lyapunov, la mesure invariante, l'entropie topologique et la dimension fractale. En chaos quantique (i.e. l'etude de systemes quantiques qui ont un equivalent chaotique dans la limite classique), ces memes OPIs permettent de faire le pont entre le comportement classique et quantique de systemes non-integrables. La localisation de ces cycles fondamentaux est un probleme complexe. Cette these aborde dans un premier temps le probleme de la detection des OPIs dans les systemes chaotiques. Une etude comparative de deux algorithmes recents est presentee. Nous approfondissons ces deux methodes afin de les utiliser sur differents systemes dont des flots continus dissipatifs et conservatifs. Une analyse du taux de convergence des algorithmes est aussi realisee afin de degager les forces et les limites de ces schemes numeriques. Les methodes de detection que nous utilisons reposent sur une transformation particuliere de la dynamique initiale. Cette astuce nous a inspire une methode alternative pour cibler et stabiliser une orbite periodique quelconque dans un systeme chaotique. Le ciblage est en general combine aux methodes de controle pour stabiliser rapidement un cycle donne. En general, il faut connaitre la position et la stabilite du cycle en question. La nouvelle methode de ciblage que nous presentons ne demande pas de connaitre a priori la position et la stabilite des orbites periodiques. Elle pourrait etre un outil complementaire aux methodes de ciblage et de controle actuelles.

  12. Catalog Production for the DES Blind Cosmology Challenge

    NASA Astrophysics Data System (ADS)

    Busha, Michael T.; Wechsler, R. H.; Becker, M. R.; Erickson, B.; Evrard, A. E.

    2013-01-01

    The Blind Cosmology Challenge (BCC) is an effort by the Dark Energy Survey (DES) to test analysis tools for extracting cosmological information using a set of detailed synthetic galaxy catalogs. Here, we describe the creation of these synthetic sky catalogs based on requirements of the optical (DES) and the near-IR VISTA Hemisphere Survey, producing catalogs covering a quarter of the sky to z ˜ 2, with sources complete to r ˜ 25. Starting with a nested set of lightcone outputs of large, N-body simulation, galaxies are assigned to the dark matter distribution using an empirical algorithm that is tunable to match observed evolution of low-order galaxy population properties (counts and spatial clustering) in luminosity-color-density space. Galaxies are lensed by matter along the line of sight (including magnification, shape distortion, and multiple images), using a new algorithm that calculates shear with 3.22 arcsec resolution at galaxy positions in the full catalog. The catalog is well suited to support DES+VISTA joint studies of galaxy clustering, groups and clusters of galaxies, and gravitational lensing, and we highlight their application to the ongoing DES BBCC. Catalogs include ˜320 million galaxies and ˜150 million stars, with realistic colors, shapes and photometric errors. Using the expected DES photometric errors, three independent photometric redshift codes are run on the catalog, two of which produce full probability distributions. The synthetic observable catalog includes object position, magnitudes in the DES and VISTA bands, photometric errors, photometric redshifts, size, ellipticity, for each of ˜ 500 million objects. The galaxy distribution is additionally masked appropriately for the 5000 square degree DES footprint, including the impact of bright stars. In addition, we offer separate catalogs with magnitudes for additional existing and planned surveys, including SDSS, CFHTLS, HSC, LSST, and Euclid.

  13. Contributions a l'etude des lidars a champs visuels multiples

    NASA Astrophysics Data System (ADS)

    Roy, Gilles

    On presente un modele, base sur la diffraction et l'optique geometrique, liant les signaux lidar a champs multiples a la densite de distribution de la taille des particules. On ecrit la relation sous forme matricielle ce qui permet d'obtenir la densite de distribution apparente de la taille des particules par inversion matricielle avec contrainte. On interprete la perturbation causee par la contribution de l'optique geometrique au signal lidar comme de la diffraction causee par une particule de diametre d'environ un micron. La densite de distribution apparente est corrigee a posteriori en calculant la contribution relative des differents ordres de diffusion a l'elargissement de la fonction de phase des particules. La validite du modele est supportee par des simulations Monte Carlo et par des resultats experimentaux obtenus sous des conditions controlees. Finalement, on applique avec succes, la technique d'inversion aux mesures lidar multichamps obtenues sur des nuages.

  14. Composite Tank

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas K. (Inventor)

    2000-01-01

    A composite tank for containing liquid oxygen and the method of making the same Wherein a water-soluble mandrel having ing the desired tank configuration and a cylindrical protuberance on at least one end is fitted with an inner boss conformance, to the configuration of the mandrel and in outer boss conforming to the configuration of the inner boss, the bosses each having a tubular portion for receiving the protuberance on the mandrel and a spherical portion. The mandrel and the bosses are first coated with a nickel coating. The mandrel is then wrapped with graphite fibers wetted with an epoxy resin and this resin is cured. A layer of insulating foam is then applied to the tank and cured. The insulating foam is machined to a desired concentration and a layer of aramid fibers wetted with a second epoxy resin is wrapped around the tank. The second resin is cured and the water soluble mandrel is washed from inside the tank.

  15. Composite foams

    DOEpatents

    Williams, Jr., Joel M.; Nyitray, Alice M.; Wilkerson, Mark H.

    1990-01-01

    Composite foams are provided comprising a first rigid, microcellular, open-celled organic polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 1 micron to about 30 microns, said first foam containing a second polymer having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 or a second polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 0.01 microns to about 1.0 micron within the open cells of said first foam.

  16. Composite foams

    DOEpatents

    Williams, Jr., Joel M.; Nyitray, Alice M.; Wilkerson, Mark H.

    1991-01-01

    Composite foams are provided comprising a first rigid, microcellular, open-celled organic polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 1 micron to about 30 microns, said first foam containing a second polymer having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 or a second polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 0.01 microns to about 1.0 micron within the open cells of said first foam.

  17. Regles de fusion en theorie des champs conformes

    NASA Astrophysics Data System (ADS)

    Begin, Luc

    1999-10-01

    Les théories de champs conformes constituent un domaine de recherche très actif avec de nombreuses applications en physique statistique, en matière condensée, en théorie des cordes, en mathématiques, etc. Nous analysons ici le calcul des règles de fusion dans les modèles Wess- Zumino-Witten par des méthodes positives. Les règles de fusion sont des quantités importantes puisqu'elles indiquent comment se combinent les champs primaires de la théorie. L'approche présentée est basée sur l'hypothèse que les règles de fusion sont décrites par un système d'inéquations linéaire et homogène et mène au concept original de «base de fusion». Cette approche simple et générale permet d'utiliser les méthodes combinatoires et de programmation linéaire pour construire les fonctions génératrices et les bases de fusion. Cette méthode permet d'obtenir des résultats originaux et explicites pour les algèbres su (3), su (4) et sp (4).

  18. Problemes en enseignement fonctionnel des langues (Problems in the Functional Teaching of Languages). Publication B-103.

    ERIC Educational Resources Information Center

    Alvarez, Gerardo, Ed.; Huot, Diane, Ed.

    Articles include: (1) "L'elaboration du materiel pedagogique pour des publics adultes" (The Elaboration of Teaching Materials for the Adult Public) by G. Painchaud-Leblanc, (2) "L'elaboration d'un programme d'etudes en francais langue seconde a partir des donnees recentes en didactique des langues" (The Elaboration of a Program of Study in French…

  19. [And Sarah Félix created "L 'Eau des Fées" and "La Parfumerie des Fées"].

    PubMed

    Raynal, Cécile

    2015-12-01

    century, the parisian perfumery of Sarah Felix was famous especially for her cosmetic "L'Eau des Fées" ("Water of the Fairies"), a dyeing supposed to give back to the old hair the color of their youth. Sarah Felix, sister of the famous actress Rachel, exercised several jobs before becoming perfumer. At first, she was actress, then she tried ... oyster culture in Normandy ! Abandoning these activities, Sarah Felix became really a businesswoman in Paris. She dedicated herself to perfumery, in particular to "L'Eau des Fées", from 1866. To launch its product, she was associated to competency characters (engineer, pharmacist, physician) and benefited from the protection of the imperial family. A lawsuit between the associates and the 1870 war hindered the company's early days, but "L'Eau des Fées" provided with quality pledges, imposed itself definitely. The "Parfumerie des Fées" completed the range of its cosmetics with creams, powders, etc. Sarah Félix paid attention to present "L'Eau des Fées" as a dye devoid of toxicity. Was it really the case and could il be sold nowadays? These two issues are discussed in the last part. PMID:26827551

  20. Al Composites

    NASA Astrophysics Data System (ADS)

    Chandanayaka, Tharaka; Azarmi, Fardad

    2014-05-01

    In the present study, cold spraying technique was used to fabricate a metal matrix composite (MMC) that consists of Ni matrix and 20 vol.% Ni3Al particles at two different particle sizes as reinforcement. This study intends to investigate the effect of reinforcement particle size on microstructural and mechanical properties of cold sprayed MMCs. Two different Ni3Al powders with nominal particle size of -45 to +5 and +45 to 100 μm were used as reinforcement in this study. Cold sprayed Ni-Ni3Al samples were subjected to the microstructural observation and characterization prior to any mechanical testing. Then, samples were tested using nano-indentation, Knoop hardness, Vickers hardness, and Resonance frequency to evaluate their mechanical properties. No significant changes were observed in microstructural characteristics due to different particle sizes. The results obtained from a variety of mechanical testings indicated that the increasing reinforcement particle size resulted in the slight reduction of mechanical properties such as elastic modulus and hardness in cold sprayed MMCs. The mechanical interlock between deposited particles defines the bonding strength in cold sprayed samples. Small size particles have a higher velocity and impact resulting in stronger interlock between deformed particles.

  1. Spectroscopic confirmation of DES12S2a

    NASA Astrophysics Data System (ADS)

    Brown, P. J.; Krisciunas, K.; Marshall, J.; Suntzeff, N.; Ahn, E.; Finley, D.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Bloom, J. S.; Kim, A.; Nugent, P.; Perlmutter, S.; Thomas, R. C.; Desai, S.; Paech, K.; Smith, R. C.; Kessler, R.; Covarrubias, R. A.; Cane, R.; Fischer, J. A.; Gilhool, S.; Gladney, L.; Gupta, R.; Mosher, J.; Sako, M.; Campbell, H.; D'Andrea, C.; Nichol, R.; Papadopoulos, A.; Sullivan, M.; March, M.; Smith, M.; Barbary, K.; Bernstein, J. P.; Biswas, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.

    2013-02-01

    We report optical spectroscopy of a supernova (SN) candidate discovered by the Dark Energy Supernova Survey (ATel #4668). The spectrum (450-1000 nm) of DES12S2a was obtained with the 9.2-m Hobby-Eberly Telescope (+Marcario Low-Resolution Spectrograph) by J. Caldwell. The spectrum shows a blue continuum with a narrow H-alpha emission feature atop a broader component indicative of a type IIn SN. The phase at the date of the spectrum given below is based on the DES light curves.

  2. Comparison des donnees simulees des capteurs de SPOT et landsat-D: Application a une region agricole

    NASA Astrophysics Data System (ADS)

    Saint, Gilbert; Podaire, Alain

    La modélisation de la luminance spectrale des objets observés en télédétection permet d'effectuer des simulations de différents capteurs à partir de données obtenues au moyen d'un scanneur DAEDALUS aéroporté : les qualités radiométrique et géométrique ont pu être évaluées par une comparaison avec des données Landsat réelles. L'analyse sur une zone agricole met surtout en évidence le rôle important de l'accroissement de la résolution.

  3. Analyse des facteurs prédictifs de malignité des goitres nodulaires : à propos de 500 cas

    PubMed Central

    Bouaity, Brahim; Darouassi, Youssef; Chihani, Mehdi; Touati, Mohamed Mliha; Ammar, Haddou

    2016-01-01

    Les nodules thyroïdiens sont très fréquents et moins de 10% d'entre eux sont malin. Ils posent un véritable problème diagnostique et thérapeutique surtout par rapport à leur nature bénigne ou maligne. L’étude de certains facteurs cliniques et paracliniques de présomption de malignité permet de bien codifier la stratégie thérapeutique. Le but de ce travail est d’étudier les facteurs prédictifs de malignité des goitres nodulaires et comparer nos résultats à ceux de la littérature. Il s'agit d'une étude rétrospective à propos de 500 cas de goitres nodulaires opérés au service d'Oto-rhino-laryngologie (ORL) et Chirurgie cervico-faciale (CCF) de l'hôpital militaire Avicenne de Marrakech entre 2006 et 2012. Le pourcentage de cancers a été de 6,8%. L’âge moyen de nos patients était de 46 ans, avec une sex-ratio de 5 (F/H). A la palpation cervicale; le caractère dure du nodule a été constaté dans 94,4% des cas de cancer, avec des limites irrégulières dans 64,70% des cas de cancer. Trois nodules étaient fixes et ils étaient tous malins. Les adénopathies cervicales ont été constatées chez 8 malades dont 7 présentaient des cancers. A l’échographie, 61,8% des nodules malins présentaient un aspect hypoéchogène, avec des contours flous dans 88,24% des cas. La vascularisation intra nodulaire était présente dans 35,3% de ces cas des cancers avec des microcalcifications chez 55,9% d'entre eux. Le halo hypoéchogene périnodulaire était incomplet dans 73,5% des cas de cancer. Nos patients étaient en euthyroïdie dans 84,6% des cas. Les facteurs prédictifs de malignité d'un goitre nodulaire, étaient donc dans notre étude d'abord cliniques: l’âge supérieur à 60 ans, la consistance dure du nodule, sa fixité, son caractère irrégulier et mal limité à la palpation, ainsi que la présence d'adénopathie(s) cervicale(s) à l'examen; et échographiques: le caractère hypoéchogène, les limites floues, la présence de

  4. Fatigue of composites

    NASA Technical Reports Server (NTRS)

    Salkind, M. J.

    1972-01-01

    The failure mechanisms in the fatigue of composite materials are analyzed in terms of the requirements for designing fatigue-critical composite structures. Fiber reinforced polymers, fiber reinforced metals, fatigue of composite structures, and composite design considerations are discussed. It is concluded that composite materials offer the engineer the opportunity for tailoring stiffness in different directions for designing dynamic components.

  5. Transport de paires EPR dans des structures mesoscopiques

    NASA Astrophysics Data System (ADS)

    Dupont, Emilie

    Dans cette these, nous nous sommes particulierement interesses a la propagation de paires EPR1 delocalisees et localisees, et a l'influence d'un supraconducteur sur le transport de ces paires. Apres une introduction de cette etude, ainsi que du cadre scientifique qu'est l'informatique quantique dans lequel elle s'inscrit, nous allons dans le chapitre 1 faire un rappel sur le systeme constitue de deux points quantiques normaux entoures de deux fils supraconducteurs. Cela nous permettra d'introduire une methode de calcul qui sera reutilisee par la suite, et de trouver egalement le courant Josephson produit par ce systeme transforme en SQUID-dc par l'ajout d'une jonction auxiliaire. Le SQUID permet de mesurer l'etat de spin (singulet ou triplet), et peut etre forme a partir d'autres systemes que nous etudierons ensuite. Dans le chapitre 2, nous rappellerons l'etude detaillee d'un intricateur d'Andreev faite par un groupe de Bale. La matrice T, permettant d'obtenir le courant dans les cas ou les electrons sont separes spatialement ou non, sera etudiee en detail afin d'en faire usage au chapitre suivant. Le chapitre 3 est consacre a l'etude de l'influence du bruit sur le fonctionnement de l'intricateur d'Andreev. Ce bruit modifie la forme du courant jusqu'a aboutir a d'autres conditions de fonctionnement de l'intricateur. En effet, le bruit present sur les points quantiques peut perturber le transport des paires EPR par l'intermediaire des degres de liberte. Nous montrerons que, du fait de l'"intrication" entre la charge de la paire et le bruit, la paire est detruite pour des temps longs. Cependant, le resultat le plus important sera que le bruit perturbe plus le transport des paires delocalisees, qui implique une resonance de Breit-Wigner a deux particules. Le transport parasite n'implique pour sa part qu'une resonance de Breit-Wigner a une particule. Dans le chapitre 4, nous reviendrons au systeme constitue de deux points quantiques entoures de deux fils

  6. Symetries et integrabilite des equations aux differences finies

    NASA Astrophysics Data System (ADS)

    Lafortune, Stephane

    2000-09-01

    La présente thèse porte sur l'étude des symétries et des propriétés d'intégrabilité des équations aux différences finies. Dans le chapitre 1, le groupe de symétrie ponctuelle d'un système couplé à deux équations différentielles aux différences est étudié. On montre que dans certains cas, la dimension du groupe peut être infinie. Les équations peuvent décrire l'interaction de deux longues chaînes moléculaires, chacune étant composée d'atomes d'un même type. Dans le chapitre 2, une classe de théories de champs avec interaction exponentielle est introduite. L'interaction dépend de deux matrices de ``couplage'' et est suffisamment générale pour inclure toutes les théories de champs de Toda existant dans la littérature. Les symétries de Lie ponctuelles sont obtenues pour les cas où l'on a un nombre fini, infini ou semi-infini de champs. Une attention spéciale est accordée à la présence de l'invariance conforme. Dans le chapitre 3, nous procédons à la classification et à l'étude d'équations linéarisables. Nous examinons tout d'abord l'équation de Gambier continue qui contient, comme réductions, toutes les équations de deuxième ordre intégrables par linéarisation. Nous introduisons par la suite la forme discrète de cette équation et obtenons les conditions d'intégrabilité à l'aide du confinement des singularités. Nous étudions aussi les différentes réductions du cas discret. De plus, nous obtenons des transformations de Schlesinger pour les équations de Gambier discrète et continue. Dans la dernière partie du chapitre, nous étudions une famille d'équations discrètes du deuxième ordre incluant des équations résolubles par linéarisation. Plusieurs cas intégrables sont obtenus. Dans le cas discret, l'étude de l'intégrabilité est faite à l'aide du confinement des singularités. Dans le chapitre 4, nous étudions un autre critère d'intégrabilité: l'entropie algébrique. Nous montrons que les r

  7. Opération multimode transverse des OPOs: des structures classiques aux corrélations quantiques

    NASA Astrophysics Data System (ADS)

    Martinelli, M.; Ducci, S.; Gigan, S.; Treps, N.; Maître, A.; Fabre, C.

    2002-06-01

    Nous démontrons la formation de structures transverses sur les faisceaux émis par un oscillateur paramétrique optique (OPO) de type II en configuration confocale. D'un point de vue classique nous mettons en évidence le caractère multimode transverse de telles structures. A travers l'étude des corrélations spatiales des faisceaux générés nous montrons que ces structures sont également multimodes d'un point de vue quantique.

  8. Apport des moyens endoscopiques dans la dilatation des sténoses caustiques de l’œsophage

    PubMed Central

    Seydou, Togo; Abdoulaye, Ouattara Moussa; xing, Li; Zi, Sanogo Zimogo; sekou, Koumaré; Wen, Yang Shang; Ibrahim, Sankare; Sekou, Toure Cheik Ahmed; Boubacar, Maiga Ibrahim; Saye, Jacque; Jerome, Dakouo Dodino; Dantoumé, Toure Ousmane; Sadio, Yena

    2016-01-01

    Introduction Toutes les sténoses symptomatiques de l’œsophage peuvent être dilatées par voie endoscopique. Nous évaluons l'apport des moyens endoscopiques dans la prise en charge de la dilatation œsophagienne pour sténose caustique de l’œsophage (SCO) au Mali. Méthodes IL s'agissait d'une étude descriptive et prospective réalisée dans le service de chirurgie thoracique à l'hôpital du Mali. Au total 46 dossiers cliniques de patients on été enregistrés et subdivisés en 4 groupes en fonction de la topographie des lésions cicatricielles. Le nombre de cas d'assistance endoscopique réalisé a été déterminé afin de comprendre l'apport des moyens endoscopiques dans le succès de la dilatation des SCO. Pour les 2 différentes méthodes de dilatation utilisées, le résultat du traitement et le coût ont comparés. Résultats La FOGD a été utilisée dans 19 cas (41.30%) de dilatation avec la bougie de Savary Guillard et dans 47.82% des cas dans la dilatation de Lerut. La vidéo-laryngoscopie a été utilisé 58.69% des cas de dilatation à la bougie de Lerut. Le passage de guide métallique et / ou de fil-guide a été réalisée dans 39.13% avec la vidéo laryngoscopie et dans 58.68% avec la FOGD. Dans la comparaison des deux méthodes, il existe une différence significative dans la survenue des complications (p=0.04075), l'anesthésie générale (p=0.02287), l'accessibilité à la méthode (p=0.04805) et la mortalité (p=0.00402). Conclusion La SCO est une pathologie grave et sous évaluée au Mali. Les moyens endoscopiques contribuent considérablement au succès de la dilatation œsophagienne pour sténose caustique dans les différentes méthodes utilisées. PMID:27200129

  9. Régimes transitoires des photopiles: durée de vie des porteurs et vitesse de recombinaison

    NASA Astrophysics Data System (ADS)

    Mialhe, P.; Sissoko, G.; Pelanchon, F.; Salagnon, J. M.

    1992-12-01

    A detailed analysis of a new experimental practice of the open circuit voltage decay method and of the short circuit current decay method for determining the base minority carrier lifetime and the back surface recombination velocity in solar cells has been performed. The measurements have been made by using the monitoring of a single transient of an operating cell at any level of injection; no power supply is required and a constant illumination level imposes the carrier injection level for normal operating conditions. The theory considers the complete continuity equation including generation and recombination rates of carriers. Precision and sensitivity of the method have been compared. The necessity of a precise knowledge of cell structural parameters have been shown to impose a limitation of the practical use of short-circuit current decay method, to low illumination levels. Cette étude développe une nouvelle méthode expérimentale pour mesurer la durée de vie des porteurs minoritaires dans la base d'une photopile ainsi que la vitesse de recombinaison à son interface arrière. Au cours de la mesure, la photopile est maintenue sous un éclairement constant qui impose le niveau d'injection souhaité. Cette méthode permet d'éliminer les effets néfastes à la mesure, provenant des impédances, propres au composant. Un régime transitoire, provoqué par une variation d'impédance, est étudié au cours de fonctionnements dans des conditions de court-circuit ou de circuit ouvert. L'étude théorique souligne la prise en compte de l'ensemble des phénomènes de recombinaison. L'obtention d'une bonne précision des mesures nécessite, avec une expérimentation rigoureuse, une connaissance précise des paramètres de structure de la photopile étudié. Pour la mesure de la durée de vie des porteurs, la plus grande sensibilité de la méthode en régime transitoire de court-circuit, comparée au régime de circuit ouvert, impose des mesures sous faible

  10. Composite powder particles

    NASA Technical Reports Server (NTRS)

    Parker, Donald S. (Inventor); MacDowell, Louis G. (Inventor)

    2009-01-01

    A liquid coating composition including a coating vehicle and composite powder particles disposed within the coating vehicle. Each composite powder particle may include a magnesium component, a zinc component, and an indium component.

  11. Contaminants evaluation of Marais des Cygnes National Wildlife Refuge in Kansas and Missouri, USA

    NASA Astrophysics Data System (ADS)

    Allen, George T.; Nash, Tom J.; Janes, David E.

    1995-05-01

    At the new Marais des Cygnes National Wildlife Refuge in Linn County, Kansas, and Bates County, Missouri, USA, we evaluated long-lived contaminants before acquisition of the land for the refuge. We sampled sediments at 16 locations and fish at seven locations. The samples were analyzed for metals and for chlorinated hydrocarbon compounds. Selected sediment samples also were analyzed for aliphatic hydrocarbons. Arsenic concentrations in sediment samples from six locations were elevated compared to US norms, but arsenic was not detected in any fish composite. Mercury concentrations in largemouth bass from two locations were comparable to the 85th percentile concentrations in nationwide fish collections. Most sediment concentrations of other metals were unlikely to have detrimental effects on biota. No chlorinated hydrocarbons were detected in any sediment sample. Chlordane compound concentrations in fish composites from two sites at the eastern end of the sampling area were 0.127 and 0.228 μg/g wet weight, respectively, which are high enough to cause concern. Most aliphatic hydrocarbons detected were found at low concentrations and probably were natural in origin. We concluded that there are no serious contaminants concerns within the project area, but past use of arsenical pesticides may mean a legacy of elevated soil arsenic levels in parts of the area and some use of banned pesticides such as chlordane and DDT likely is still occurring near the refuge.

  12. Simulations of the OzDES AGN reverberation mapping project

    NASA Astrophysics Data System (ADS)

    King, Anthea L.; Martini, Paul; Davis, Tamara M.; Denney, K. D.; Kochanek, C. S.; Peterson, Bradley M.; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; Banerji, Manda; McMahon, Richard; Sharp, Rob; Lidman, C.

    2015-10-01

    As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ≥500 quasars over five years in the 30 deg2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrain the radius-luminosity (R-L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ˜35-45 per cent of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ˜1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R-L relationship parameters for H β, Mg II λ2798, and C IV λ1549. Extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R-L parameter constraints for all broad emission lines.

  13. The Des Moines Plan: A Plan for Student Success.

    ERIC Educational Resources Information Center

    Castelda, Sharon; Wagner, Mary

    The Des Moines Plan (DMP) is described, which is a comprehensive kindergarten through grade 12 program designed to improve and strengthen students' reading, writing, and mathematics skills. The program was implemented during the fall semester of the 1986-87 school year. The DMP adopted the instructional model implemented by the Chapter 1 program…

  14. Recognition of Langue des Signes Quebecoise in Eastern Canada

    ERIC Educational Resources Information Center

    Parisot, Anne-Marie; Rinfret, Julie

    2012-01-01

    This article presents a portrait of two community-level and legal efforts in Canada to obtain official recognition of ASL and LSQ (Langue des signes quebecoise), both of which are recognized as official languages by the Canadian Association of the Deaf (CAD). In order to situate this issue in the Canadian linguistic context, the authors first…

  15. Die Gasultrazentrifuge als mediale Projektion des Kalten Krieges

    NASA Astrophysics Data System (ADS)

    Helmbold, Bernd

    Studien der letzten Dekaden nach der Wiedervereinigung von BRD und DDR erweitern die Perspektive der Wissenschaftsgeschichte vom Fokus des Big Science und der technisch-militärisch-industriellen Auseinandersetzung zwischen den zwei Blöcken zu einer globalen Transformation im Konflikt der Supermächte geprägt durch lokale und auch interne Ausformungen.

  16. Mechanistic Enzymology of the Radical SAM Enzyme DesII

    PubMed Central

    2016-01-01

    DesII is a member of the radical SAM family of enzymes that catalyzes radical-mediated transformations of TDP-4-amino-4,6-didexoy-D-glucose as well as other sugar nucleotide diphosphates. Like nearly all radical SAM enzymes, the reactions begin with the reductive homolysis of SAM to produce a 5′-deoxyadenosyl radical which is followed by regiospecific hydrogen atom abstraction from the substrate. What happens next, however, depends on the nature of the substrate radical so produced. In the case of the biosynthetically relevant substrate, a radical-mediated deamination ensues; however, when this amino group is replaced with a hydroxyl, one instead observes dehydrogenation. The factors that govern the fate of the initially generated substrate radical as well as the mechanistic details underlying these transformations have been a key focus of research into the chemistry of DesII. This review will discuss recent discoveries pertaining to the enzymology of DesII, how it may relate to understanding other radical-mediated lyases and dehydrogenases and the working hypotheses currently being investigated regarding the mechanism of DesII catalysis.

  17. Simulations of the OzDES AGN reverberation mapping project

    SciTech Connect

    King, Anthea L.; Martini, Paul; Davis, Tamara M.; Denney, K. D.; Kochanek, C. S.; Peterson, Bradley M.; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; Banerji, Manda; McMahon, Richard; Sharp, Rob; Lidman, C.

    2015-08-26

    As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrain the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.

  18. 75 FR 63714 - Drawbridge Operation Regulation; Des Allemands Bayou, LA

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-18

    ... Burlington Northern Santa Fe Railway swing bridge across Des Allemands Bayou, mile 14.0, in St. Charles and Lafourche Parishes, Louisiana. The deviation is necessary to perform extensive rehabilitation to the bridge. This deviation allows the bridge to remain closed to navigation completely from January 18,...

  19. L'Infection Nosocomiale en Reanimation des Brules

    PubMed Central

    Siah, S.; Belefqih, R.; Elouennass, M.; Fouadi, F.E.; Ihrai, I.

    2009-01-01

    Summary L'infection nosocomiale bactérienne étant l'une des principales causes de morbidité et de mortalité chez le brûlé, nous avons réalisé une étude rétrospective portant sur 84 patients hospitalisés au sein du service de réanimation des brûlés de l'Hôpital Militaire d'Instruction Mohammed V de Rabat, sur une période de 3 ans, du premier janvier 2001 au 31 décembre 2003. Les critères d'infection nosocomiale étaient ceux du Center for Disease Control d'Atlanta de 1988. Les taux d'incidence ont été calculés. La population infectée a été comparée à celle non infectée. L'écologie bactérienne du service a été décrite comme aussi l'antibiotype. Il ressort de cette étude la survenue de 87 infections nosocomiales chez 27 patients. L'incidence cumulative était de 103 infections pour 1000 jours de traitement. Pour ce qui est des caractéristiques des infections bactériennes, les sites infectés étaient la peau (77%), le sang (13,8%), les voies urinaires (8%) et les poumons (1,1%). Les principaux germes étaient: Staphylococcus sp. (33,3%), Pseudomonas aeruginosa (23%), Enterococcus faecalis et Acinetobacter (8%). Les staphylocoques étaient méticillo-résistants dans 22,2% des cas. Le Pseudomonas et l'Acinetobacter étaient multirésistants (60%). Dans notre étude les facteurs prédictifs de survenue des infections nosocomiales que nous avons retenus après l'étude comparative des populations infectées et non infectées ont été l'âge, le body mass index, l'abbreviated burn severity index et le remplissage initial. En isolant ces paramètres, nous avons pu établir une équation à valeur prédictive de survenue d'infection nosocomiale chez le patient brûlé. PMID:21991158

  20. Petrology and geochemistry of primary magmas trapped in melt inclusions in scoria of Beaunit Maar (Chaîne des Puys, Massif Central, France)

    NASA Astrophysics Data System (ADS)

    Jannot, S.; Schiano, P.; Boivin, P.; Clocchiatti, R.; Chazot, G.

    2003-04-01

    The Massif Central area, characterized by a typical intraplate alkaline serie, is the largest magmatic province of the West-European Rift system. Although it has been the subject of several studies, the nature of Massif Central sources is still a matter of debate and many hypotheses are proposed, including deep-rooted continental hotspot, metasomatised spinel lherzolites and an asthenospheric flow linked to the lithospheric root of the Alpine chain. The Chaîne des Puys is the last magmatic province of the French Massif Central and is composed of hundred young well-preserved volcanoes. The present work aims to supply information on the nature and the origin of the source chemistry of alkaline serie from the Chaîne des Puys, by characterizing the trace and major element composition of minute melts preserved as quenched glass inclusions inside olivines phenocrysts in scoria from the Beaunit Maar. Heating stage experiments performed at ambient pressure on partially crystallised primary melt inclusions suggest CO_2 oversaturation of the trapped melt, and an entrapment temperature around 1200^oC±10^oC. Daughter minerals analyses point to a Ti-and Ca-rich basaltic paragenesis, in good agreement with that of erupted basalts from the Chaîne des Puys. Major element compositions show that melts trapped in inclusions evolve by limited fractional crystallization. Inclusions trapped in the more primitive olivine phenocrysts (Fo85) have alkali-basalt compositions that fall on the primitive end of the compositional trend define by the lavas of the Chaîne des Puys. Their major element chemistry rules out the hypothesis of a mantle source in the spinel stability field and requires a garnet-bearing mantle source. Analyzed for trace-element composition by LA-ICP-MS, they display homogeneous, enriched patterns, similar to those characterizing oceanic island and continental basalts. They have high concentration of LILE and LREE/HREE ratios. Such trace-element feature are typical of

  1. Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

    2011-01-01

    Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la s

  2. Les reseaux de politique publique comme facteur d'influence du choix des instruments de politique energetique canadienne a des fins environnementales de 1993 a nos jours

    NASA Astrophysics Data System (ADS)

    Fathy El Dessouky, Naglaa

    Au cours de la derniere decennie, les modes de la gouvernance ont pris place dans un contexte totalement different de celui qu'ils avaient auparavant. Les gouvernements modernes se rendent compte qu'ils perdent de plus en plus leur capacite a elaborer et a gerer les changements d'une maniere autonome. Ainsi, les fonctions et les activites traditionnellement accomplies exclusivement par le gouvernement engagent de nos jours une gamme d'acteurs etatiques et non etatiques. A l'encontre du concept traditionnel de l'Etat controleur, la gouvernance contemporaine est ainsi devenue moins une question d'offre de service et davantage une gestion indirecte des reseaux de politique publique. Dans cette entreprise, les gouvernements contemporains, cherchant plus d'information, de soutien et de legitimite en matiere de formulation des decisions, ont besoin d'etablir des relations avec les divers groupes d'interet qui, a leur tour, voulaient plus de promotion et de protection en faveur de leurs interets a travers leur implication au processus de l'elaboration et de la mise en oeuvre des politiques publiques. Ainsi, l'approche des reseaux de politique publique represente aujourd'hui un courant considerable au sein du champ d'analyse des politiques publiques. Toutefois, les preoccupations des chercheurs pour cette approche, dans le domaine des politiques energetiques a des fins environnementales, semblent recentes, et les etudes realisees sont encore trop peu nombreuses. Au Canada, au debut des annees 1990, le gouvernement ainsi que plusieurs groupes d'interets, des differents secteurs energetique, industriel et environnemental, ont commence a intensifier leurs efforts pour s'attaquer au probleme du changement climatique d'origine energetique, genere surtout par le secteur de l'industrie. Au cours de la derniere decennie, la question touchant plutot le sujet du developpement energetique durable represente le plus important domaine des politiques publiques ayant surgi recemment dans

  3. Relation entre les caractéristiques des table-bancs et les mesures anthropométriques des écoliers au Benin

    PubMed Central

    Falola, Stève Marjelin; Gouthon, Polycarpe; Falola, Jean-Marie; Fiogbe, Michel Armand; Nigan, Issiako Bio

    2014-01-01

    Introduction Le mobilier scolaire et la posture assise en classe sont souvent impliqués dans l'apparition des douleurs rachidiennes, influant de fait sur la qualité des tâches réalisées par les apprenants. Aucune étude n'a encore vérifié le degré d'adéquation entre les caractéristiques du mobilier et celles des écoliers au Bénin. L'objectif de cette étude transversale est donc de déterminer la relation entre les dimensions des table-bancs utilisées en classe et les mesures anthropométriques des écoliers au Bénin. Methods Elle a été réalisée avec un échantillon probabiliste de 678 écoliers, âgés de 4 à 17 ans. Les mesures anthropométriques des écoliers et les mensurations relatives aux longueurs, largeurs et hauteurs des table-bancs ont été mesurées, puis intégrées aux équations proposées dans la littérature. Les pourcentages des valeurs situées hors des limitesacceptables, dérivées de l'application des équations ont été calculés. Results La largeur et la hauteur des table-bancs utilisées par les écoliers étaient plus élevées (p < 0,05) que les valeurs de référence recommandées par les structures officielles de contrôle et de production des mobiliers scolaires au Bénin. Quel que soit le sexe, il y avait une inadéquation entre la largeur du banc et la longueur fesse-poplité, puis entre la hauteur de la table et la distance coude-bancdes écoliers. Conclusion Les résultats suggèrent de prendre en compte l’évolution des mesures anthropométriques des écoliers dans la confection des table-bancs, afin de promouvoir de bonnes postures assises en classe et de réduire le risque de troubles du rachis. PMID:25317232

  4. Optimisation des proprietes fonctionnelles des alliages a memoire de forme suite a l'application de traitements thermomecaniques

    NASA Astrophysics Data System (ADS)

    Demers, Vincent

    L'objectif de ce projet est de determiner les conditions de laminage et la temperature de traitement thermique maximisant les proprietes fonctionnelles de l'alliage a memoire de forme Ti-Ni. Les specimens sont caracterises par des mesures de calorimetrie, de microscopie optique, de gene ration de contrainte, de deformation recuperable et des essais mecaniques. Pour un cycle unique, l'utilisation d'un taux d'ecrouissage e=1.5 obtenu avec l'application d'une force de tension FT = 0.1sigma y et d'une huile minerale resulte en un echantillon droit, sans microfissure et qui apres un recuit a 400°C, produit un materiau nanostructure manifestant des proprietes fonctionnelles deux fois plus grandes que le meme materiau ayant une structure polygonisee. Pour des cycles repetes, les memes conditions de laminage sont valables mais le niveau de deformation optimal est situe entre e=0.75-2, et depend particulierement du mode de sollicitation, du niveau de stabilisation et du nombre de cycles a la rupture requis par l'application.

  5. Dépistage des maladies cardiovasculaires chez des étudiants de l'Université de Douala et influence des activités physiques et sportives

    PubMed Central

    Ewane, Marielle Epacka; Mandengue, Samuel Honoré; Priso, Eugene Belle; Tamba, Stéphane Moumbe; Ahmadou; Fouda, André Bita

    2012-01-01

    Introduction Les maladies cardiovasculaires (MCV) constituent l'une des principales causes de mortalité dans les pays en développement. Le dépistage de ces dernières chez des jeunes est un défi dans la lutte contre leur expansion. Le but de cette étude était de dépister ces maladies au sein d'une population jeunes d’étudiants camerounais. Methodes Deux mille six cent cinquante-huit étudiants de l'Université de Douala (23,6 ± 2,9 ans, sex-ratio H/F = 0,9) ont en Avril - Mai 2011 participé à une campagne de dépistage gratuit du diabète, de l'hypertension artérielle (HTA) et de l'obésité. Ils ont également été soumis à une d'enquête évaluant leur niveau en activités physiques et sportives (APS). Resultats 12,7% des participants avaient une pression artérielle (PA) ≥ 140/90 mmHg, 3,6% étaient obèses et 0,9% avaient une glycémie ≥1,26 g/L. Des corrélations ont été trouvées entre certains facteurs de risque (diabète, hypertension et obésité) et le niveau académique d'une part (r =0,366; p < 0,0001) et le temps passé devant la télévision d'autres part (r = 0,411; p < 0,0001). L‘APS était inversement corrélée à l‘âge (r =-0,015; p < 0,0001) et au temps passé devant la télévision (r = -0,059; p = 0,002). Conclusion La présence des MCV et leurs facteurs de risque mis en évidence dans cette étude réalisée en milieu estudiantin camerounais interpelle à une prévention et une éducation dans la lutte contre ces dernières. PMID:22655111

  6. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, R. G.; Wiberley, S. E.

    1985-01-01

    Various topics relating to composite structural materials for use in aircraft structures are discussed. The mechanical properties of high performance carbon fibers, carbon fiber-epoxy interface bonds, composite fractures, residual stress in high modulus and high strength carbon fibers, fatigue in composite materials, and the mechanical properties of polymeric matrix composite laminates are among the topics discussed.

  7. Conducting Compositions of Matter

    NASA Technical Reports Server (NTRS)

    Viswanathan, Tito (Inventor)

    1999-01-01

    The invention provides conductive compositions of matter, as well as methods for the preparation of the conductive compositions of matter, solutions comprising the conductive compositions of matter, and methods of preparing fibers or fabrics having improved anti-static properties employing the conductive compositions of matter.

  8. Conducting compositions of matter

    NASA Technical Reports Server (NTRS)

    Viswanathan, Tito (Inventor)

    2000-01-01

    The invention provides conductive compositions of matter, as well as methods for the preparation of the conductive compositions of matter, solutions comprising the conductive compositions of matter, and methods of preparing fibers or fabrics having improved anti-static properties employing the conductive compositions of matter.

  9. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1983-01-01

    Transverse properties of fiber constituents in composites, fatigue in composite materials, matrix dominated properties of high performance composites, numerical investigation of moisture effects, numerical investigation of the micromechanics of composite fracture, advanced analysis methods, compact lug design, and the RP-1 and RP-2 sailplanes projects are discussed.

  10. Prise en charge des complications des fistules artério-veineuses pour hémodialyse chronique

    PubMed Central

    Jiber, Hamid; Zrihni, Youssef; Zaghloul, Rachid; Hajji, Rita; Zizi, Othman; Bouarhroum, Abdellatif

    2015-01-01

    La fistule artério-veineuse native est l'accès vasculaire de choix pour l'hémodialyse chronique en raison de sa longévité, son taux faible de complication et de mortalité par rapport aux pontages artério-veineux et aux cathéters. Cependant, il arrive assez souvent que l'on assiste à des complications qui sont dominées par la sténose et la thrombose. C'est une étude rétrospective des complications ayants survenues pour 31 fistules artério-veineuses pour hémodialyse chronique des 200 fistules réalisées chez 200 patients au sein du service de chirurgie vasculaire du CHU Hassan II de Fès sur une période de trois ans, étendue de Janvier 2007 à Décembre 2009. Ces complications ont été présentés par les thromboses dans 14 cas soit 45,15% de l'ensemble des complications, les sténoses dans 4 cas (12,90%,) les anévrismes dans 4 cas (12,90%), les complications ischémiques dans 3 cas (9,67%), l'infection dans 3 cas (9,67%), l'hémorragie dans 2 cas (6,45%) et l’ hyperdébit dans un seul cas soit 3,22%. On a pu conserver 22 fistules soit 70,96% par traitement chirurgical ou endovasculaire, on a confectionné une nouvelle fistule dans 8 cas soit 25,80%, et on a adressé une patiente (3,22%) pour pose d'un cathéter veineux tunnelisé permanent. Les complications des fistules artério-veineuses pour l'hémodialyse chronique sont la principale cause de morbidité chez les patients hémodialysés, il est donc important de s'impliquer lors de leur création, et de donner un maximum d'attention quand ils sont manipulés. Ceci suggère la mise en place d'un programme de surveillance de ces fistules en raison de l'impact des complications sur la morbi-mortalité du patient hémodialysé et sur le plan financier. PMID:26113933

  11. The DES Science Verification weak lensing shear catalogues

    NASA Astrophysics Data System (ADS)

    Jarvis, M.; Sheldon, E.; Zuntz, J.; Kacprzak, T.; Bridle, S. L.; Amara, A.; Armstrong, R.; Becker, M. R.; Bernstein, G. M.; Bonnett, C.; Chang, C.; Das, R.; Dietrich, J. P.; Drlica-Wagner, A.; Eifler, T. F.; Gangkofner, C.; Gruen, D.; Hirsch, M.; Huff, E. M.; Jain, B.; Kent, S.; Kirk, D.; MacCrann, N.; Melchior, P.; Plazas, A. A.; Refregier, A.; Rowe, B.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Suchyta, E.; Troxel, M. A.; Vikram, V.; Abbott, T.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Capozzi, D.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Castander, F. J.; Clampitt, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Doel, P.; Fausti Neto, A.; Flaugher, B.; Fosalba, P.; Frieman, J.; Gaztanaga, E.; Gerdes, D. W.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nord, B.; Ogando, R.; Reil, K.; Romer, A. K.; Roodman, A.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, D.; Walker, A. R.; Wechsler, R. H.

    2016-08-01

    We present weak lensing shear catalogues for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogues of 2.12 million and 3.44 million galaxies respectively. We detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. We also discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogues for the full 5-year DES, which is expected to cover 5000 square degrees.

  12. The DES Science Verification Weak Lensing Shear Catalogs

    SciTech Connect

    Jarvis, M.

    2015-07-20

    We present weak lensing shear catalogs for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogs of 2.12 million and 3.44 million galaxies respectively. We also detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. Furthermore, we discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogs for the full 5-year DES, which is expected to cover 5000 square degrees.

  13. The DES Science Verification weak lensing shear catalogues

    NASA Astrophysics Data System (ADS)

    Jarvis, M.; Sheldon, E.; Zuntz, J.; Kacprzak, T.; Bridle, S. L.; Amara, A.; Armstrong, R.; Becker, M. R.; Bernstein, G. M.; Bonnett, C.; Chang, C.; Das, R.; Dietrich, J. P.; Drlica-Wagner, A.; Eifler, T. F.; Gangkofner, C.; Gruen, D.; Hirsch, M.; Huff, E. M.; Jain, B.; Kent, S.; Kirk, D.; MacCrann, N.; Melchior, P.; Plazas, A. A.; Refregier, A.; Rowe, B.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Suchyta, E.; Troxel, M. A.; Vikram, V.; Abbott, T.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Capozzi, D.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Castander, F. J.; Clampitt, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Doel, P.; Fausti Neto, A.; Flaugher, B.; Fosalba, P.; Frieman, J.; Gaztanaga, E.; Gerdes, D. W.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nord, B.; Ogando, R.; Reil, K.; Romer, A. K.; Roodman, A.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, D.; Walker, A. R.; Wechsler, R. H.

    2016-08-01

    We present weak lensing shear catalogues for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogues of 2.12 million and 3.44 million galaxies, respectively. We detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. We also discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogues for the full 5-yr DES, which is expected to cover 5000 square degrees.

  14. The DES Science Verification Weak Lensing Shear Catalogs

    DOE PAGESBeta

    Jarvis, M.

    2016-05-01

    We present weak lensing shear catalogs for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogs of 2.12 million and 3.44 million galaxies respectively. We also detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SVmore » data. Furthermore, we discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogs for the full 5-year DES, which is expected to cover 5000 square degrees.« less

  15. Acupuncture Au Laser He-Ne: Traitement Des Infections Rhinopharyngees

    NASA Astrophysics Data System (ADS)

    Dussert, Dr.

    1984-03-01

    Mesdames, Messieurs, y a 23 mois, je recevais l'urgence suivante dans mon cabinet medical : 1) Un homme de 53 ans, dyspneioue (cliniquement it etait en Bradypnee expiratoire). Il venait d'être hospitalise 1 mois et avait ete place sous cortisone. Je le fais assoir, et j'irradie avec un laser sur chacun des ganglions stellaires pendant 6 minutes je debloque ce malade qui se met e respirer normalement. 2) Quelques temps apres : C'est un enfant de 7 ans que je regois en crise d'asthme. J'irradie sur chacun des ganglions stellaires pendant 4 minutes une onde laser d'impulsion 6 et en basse freouence. L'enfant voit s'estomper la crise d'asthme. Devant ces deux cas, je decide d'organiser un travail de recherche.

  16. The DES Science Verification Weak Lensing Shear Catalogues

    NASA Astrophysics Data System (ADS)

    Jarvis, M.; Sheldon, E.; Zuntz, J.; Kacprzak, T.; Bridle, S. L.; Amara, A.; Armstrong, R.; Becker, M. R.; Bernstein, G. M.; Bonnett, C.; Chang, C.; Das, R.; Dietrich, J. P.; Drlica-Wagner, A.; Eifler, T. F.; Gangkofner, C.; Gruen, D.; Hirsch, M.; Huff, E. M.; Jain, B.; Kent, S.; Kirk, D.; MacCrann, N.; Melchior, P.; Plazas, A. A.; Refregier, A.; Rowe, B.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Suchyta, E.; Troxel, M. A.; Vikram, V.; Abbott, T.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Capozzi, D.; Rosell, A. Carnero; Kind, M. Carrasco; Carretero, J.; Castander, F. J.; Clampitt, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Doel, P.; Neto, A. Fausti; Flaugher, B.; Fosalba, P.; Frieman, J.; Gaztanaga, E.; Gerdes, D. W.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nord, B.; Ogando, R.; Reil, K.; Romer, A. K.; Roodman, A.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, D.; Walker, A. R.; Wechsler, R. H.

    2016-05-01

    We present weak lensing shear catalogues for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogues of 2.12 million and 3.44 million galaxies respectively. We detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. We also discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogues for the full 5-year DES, which is expected to cover 5000 square degrees.

  17. Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

    PubMed Central

    Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

    2012-01-01

    HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d

  18. Modelisations des effets de surface sur les jets horizontaux subsoniques d'hydrogene et de methane

    NASA Astrophysics Data System (ADS)

    Gomez, Luis Fernando

    Le developpement des codes et de normes bases sur une methodologie scientifique requiert la capacite de predire l'etendue inflammable de deversements gazeux d'hydrogene sous differentes conditions. Des etudes anterieures ont deja etabli des modeles bases sur les lois de conservation de la mecanique des fluides basees sur des correlations experimentales qui permettent de predire la decroissance de la concentration et de la vitesse d'un gaz le long de l'axe d'un jet libre vertical. Cette etude s'interesse aux effets de proximite a une surface horizontale parallele sur un jet turbulent. Nous nous interessons a son impact sur l'etendue du champ de la concentration et sur l'enveloppe inflammable en particulier. Cette etude est comparative : l'hydrogene est compare au methane. Ceci permet de degager l'influence des effets de difference de la densite sur le comportement du jet, et de comparer le comportement de l'hydrogene aux correlations experimentales, qui ont ete essentiellement etablies pour le methane. Un modele decrivant l'evolution spatio-temporelle du champ de concentration du gaz dilue est propose, base sur la mecanique des fluides computationnelle. Cette approche permet de varier systematiquement les conditions aux frontieres (proximite du jet a la surface, par exemple) et de connaitre en detail les proprietes de l'ecoulement. Le modele est implemente dans le code de simulations par volumes finis de FLUENT. Les resultats des simulations sont compares avec les lois de similitudes decoulant de la theorie des jets d'ecoulements turbulents libres ainsi qu'avec les resultats experimentaux disponibles. L'effet de la difference des masses molaires des constituantes du jet et des constituantes du milieu de dispersion est egalement etudie dans le contexte du comportement d'echelle de la region developpee du jet.

  19. Partager : des technologies de pointe au service de la société

    ScienceCinema

    None

    2011-10-06

    Médecine, climatologie, métrologie et informatique, les techniques utilisées par le LHC trouvent déjà des répercussions dans d?autres domaines scientifiques. Utilisant des techniques inédites, la physique des particules en fait bénéficier la société toute entière.

  20. Mechanical characterization of polymers and composites with a servohydraulic high-speed tensile tester

    NASA Astrophysics Data System (ADS)

    Béguelin, Ph.; Barbezat, M.; Kausch, H. H.

    1991-12-01

    This study is concerned with the measurement of the mechanical behaviour of polymers and composites at intermediate strain rates. It illustrates with two examples, the application of a high speed servohydraulic testing machine and a newly designed optical extensometer. In the first part of the study, the dynamic nature of high speed tensile testing with servohydraulic apparatus is discussed, and a damping technique is proposed. In the second part, this technique has been applied to the measurement of the tensile properties of annealed and unannealed neat PEEK at strain rates between 3 × 10^{-2} and 2,4 × 10^2 s^{-1}. Both materials show increased yield stress and drawing stress with increasing strain rate. However, annealed specimens have been shown to exhibit superior mechanical properties. In the third part, mode I delamination tests have been performed on unidirectional IM6/PEEK composites at nominal strain rates between 1 × 10^{-6} and 8 × 10^{-1} s^{-1}. At the higher velocities the analysis is performed by means of FFT filtering. A moderate reduction in interlaminar fracture toughness was found with increasing loading rate. Cette étude aborde la mesure des propriétés mécaniques des polymères et composites soumis à des vitesses de déformation moyennes. Elle illustre au travers de deux exemples l'utilisation d'une machine d'essais servo-hydraulique à grande vitesse. Elle présente également un capteur optique d'extensométrie de conception nouvelle. Dans la première partie de l'étude, la nature vibratoire des essais de traction à vitesse élevée réalisés sur une machine servo-hydraulique est discutée, et une technique d'amortissement est proposée. Dans une deuxième partie, cette technique est appliquée à l'étude des propriétés en traction du PEEK non recuit et recuit dans le domaine des vitesses de déformation de 3 × 10^{-2} à 2,4 × 10^2 s^{-1}. Les résultats montrent un accroissement systématique de la contrainte au seuil

  1. Landform Variability in the Chaine Des Puys Tracing Multiple Processes

    NASA Astrophysics Data System (ADS)

    van Wyk de Vries, B.; Grosse, P.

    2014-12-01

    The Chaîne des Puys is a highly varied, type monogenetic field, and was acknowledged by 38th WH UNESCO Committee to contain Outstanding Universal Value. The Chaîne des Puys - Limagne Fault should be presented in 2016 for World Heritage Status. The 30 km long Chaîne des Puys contains ranges from simple basaltic scoria cones to complex, multicrater cones, and small simple domes to complicated trachytic edifices. There is also a range of phreatomagmatic landforms from tuff rings to maars and vulcanian to sub plinian deposits. There is a wide range of pahoehoe and aa lava types, that have flowed over different topographies. Here we take morphometrical data to analyse the variability of the edifices using a 10 m regional topographic DTM. The volcanoes form a broad continuum of morphological features, and height/widths of domes and cones overlap. Some edifices, are smooth and elliptical, even though they have erupted complex lava sequences, while others complex shapes, but are related to simple lava flows. There seems to be no easy correlation between cone morphology and eruption histories derived from lava fields and distal tephras. In the few cones where the interior is visible, the shape of the cone is seen to vary with changing eruption events. The final shape is a combination of changing activity, with the last events having the strongest morphometic signature. The broad variations in edifice, lava field, and deposit morphology are described and quantified, however it becomes clear from the few individual eruptions already studied, that to fully appreciate the range of monogenetic eruption scenarios presented by the Chaîne des Puys, much more detailed work is required. This is being made possible by new acquisitions of LiDAR imagery, new geophysical work, and the combination of excellent preservation and extensive outcrop that is partly the result the original geology and long term responsible land management by the local populace, regional park and local

  2. Simulations of the OzDES AGN reverberation mapping project

    DOE PAGESBeta

    King, Anthea L.; Martini, Paul; Davis, Tamara M.; Denney, K. D.; Kochanek, C. S.; Peterson, Bradley M.; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; et al

    2015-08-26

    As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrainmore » the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.« less

  3. La dysplasie fibreuse: état des lieux

    PubMed Central

    Akasbi, Nessrine; Abourazzak, Fatima Ezzahra; Talbi, Sofia; Tahiri, Latifa; Harzy, Taoufik

    2015-01-01

    La dysplasie fibreuse des os est une affection osseuse bénigne congénitale mais non héréditaire, où l'os normal est remplacé par un tissu fibreux renfermant une ostéogenèse immature. Elle est due à une mutation du gène GNAS 1sur le chromosome 20q13, une mutation activatrice de la sous-unité α de la protéine G. C'est une pathologie qui est le plus souvent silencieuse, de découverte fortuite sur une radiographie standard ou révélée par une douleur osseuse ou une fracture pathologique. L'imagerie et l'histologie, quand elle est nécessaire, permettent d’établir le diagnostic. Bien qu'il ne s'agisse pas d'une tumeur, elle est souvent classée dans la catégorie des tumeurs osseuses bénignes pour des raisons de diagnostic différentiel radiographique et anatomopathologique. Elle peut être monostotique ou polyostotique. L'approche thérapeutique est essentiellement symptomatique. Quelques publications récentes ont suggéré l'intérêt majeur d'un bisphosphonate, en particulier le pamidronate, qui diminuerait les douleurs et stimulerait une reminéralisation progressive des zones ostéolytiques chez les patients traités. D'autres traitements tels que la thérapie ciblée sont en cours d’évaluation. PMID:26401215

  4. Discovery and Classification of DES15C2kyh

    NASA Astrophysics Data System (ADS)

    Graham, M. L.; Filippenko, A. V.; Nugent, P.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Perlmutter, S.; Foley, R. J.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.

    2015-10-01

    We report optical spectroscopy of DES15C2kyh discovered by the Dark Energy Survey. The spectrum (340-1025nm) was obtained using LRIS on Keck-I. Object classification was performed using superfit (Howell et al, 2005, ApJ, 634, 1190) and SNID (Blondin & Tonry, 2007, ApJ, 666, 1024), the details of which are reported in the table below.

  5. Discovery and Classification of DES15S2lam

    NASA Astrophysics Data System (ADS)

    Pan, Y.-C.; Foley, R. J.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.

    2015-10-01

    We report optical spectroscopy of DES15S2lam discovered by the Dark Energy Survey. The spectrum (540-965nm) was obtained using GMOS on Gemini-North. Object classification was performed using superfit (Howell et al, 2005, ApJ, 634, 1190) and SNID (Blondin & Tonry, 2007, ApJ, 666, 1024), the details of which are reported in the table below.

  6. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1979-01-01

    A multifaceted program is described in which aeronautical, mechanical, and materials engineers interact to develop composite aircraft structures. Topics covered include: (1) the design of an advanced composite elevator and a proposed spar and rib assembly; (2) optimizing fiber orientation in the vicinity of heavily loaded joints; (3) failure mechanisms and delamination; (4) the construction of an ultralight sailplane; (5) computer-aided design; finite element analysis programs, preprocessor development, and array preprocessor for SPAR; (6) advanced analysis methods for composite structures; (7) ultrasonic nondestructive testing; (8) physical properties of epoxy resins and composites; (9) fatigue in composite materials, and (10) transverse thermal expansion of carbon/epoxy composites.

  7. Approche à l’endroit des blessures traumatiques à la main en soins primaires

    PubMed Central

    Cheung, Kevin; Hatchell, Alexandra; Thoma, Achilleas

    2013-01-01

    Résumé Objectif Passer en revue la prise en charge initiale des blessures traumatiques communes à la main que voient les médecins de soins primaires. Sources des données Nous avons examiné les données cliniques probantes et les ouvrages spécialisés récents cernés par des recherches dans la base de données électronique MEDLINE. Nous avons utilisé l’opinion d’experts pour compléter les recommandations dans les domaines où les données scientifiques étaient rares. Message principal Les médecins de soins primaires sont couramment appelés à prendre en charge des patients victimes de blessures traumatiques à la main. Dans le contexte d’un cas clinique, nous examinons l’évaluation, le diagnostic et la prise en charge initiale des traumatismes communs à la main. La présentation et la prise en charge des blessures au lit de l’ongle, des amputations de l’extrémité du doigt, des doigts en maillet, des fractures à la main, des lacérations de tendons, des morsures et de la ténosynovite infectieuse seront aussi discutées. Les principes de la prise en charge des blessures traumatiques à la main comportent la réduction et l’immobilisation des fractures, la prescription d’imagerie radiographique post-réduction, l’obtention d’un recouvrement par les tissus mous, la prévention et le traitement des infections et l’assurance d’une prophylaxie antitétanique. Conclusion Il est essentiel d’assurer une évaluation et une prise en charge appropriées des blessures traumatiques à la main pour prévenir une morbidité considérable à long terme dans une population autrement en santé. La reconnaissance sans délai des blessures qui nécessitent une demande de consultation urgente ou rapide auprès d’un chirurgien spécialiste de la main est également critique.

  8. Einfluss des Internets auf das Informations-, Einkaufs- und Verkehrsverhalten

    NASA Astrophysics Data System (ADS)

    Nerlich, Mark R.; Schiffner, Felix; Vogt, Walter

    Mit Daten aus eigenen Erhebungen können das einkaufsbezogene Informations- und Einkaufsverhalten im Zusammenhang mit den verkehrlichen Aspekten (Distanzen, Verkehrsmittel, Wegekopplungen) dargestellt werden. Die Differenzierung in die drei Produktkategorien des täglichen, mittelfristigen und des langfristigen Bedarfs berücksichtigt in erster Linie die Wertigkeit eines Gutes, die seine Erwerbshäufigkeit unmittelbar bestimmt. Der Einsatz moderner IKT wie das Internet eröffnet dem Endverbraucher neue Möglichkeiten bei Information und Einkauf. Die verkehrliche Relevanz von Online-Shopping wird deutlich, wenn man berücksichtigt, dass im Mittel rund 17% aller Online-Einkäufe, die die Probanden durchgeführt haben, Einkäufe in Ladengeschäften ersetzen. Dies gilt in verstärktem Maße für Online-Informationen: etwa die Hälfte hätte alternativ im stationären Einzelhandel stattgefunden. Da der Erwerb von Gütern des täglichen Bedarfs häufig nahräumlich und in relevantem Anteil nicht-motorisiert erfolgen kann, sind in diesem Segment - im Gegensatz zum mittel- und langfristigen Bedarf - nur geringe Substitutionseffekte zu beobachten.

  9. Infections fongiques des brûlé : revue

    PubMed Central

    Arnould, JF.; Le Floch, R.

    2015-01-01

    Summary Les infections fongiques locales ou générales sont souvent d’une extrême gravité chez les brûlés. Les brûlés combinent de nombreux facteurs de risque à une immunodépression induite par la brûlure. Les infections de plaies sont le fait des genres Candida, Aspergillus et des agents de mucormycoses. Ces deux derniers cas sont à l’origine de lésions particulièrement sévères. Leur diagnostic repose sur la biopsie cutanée avec examens mycologique et anatomopathologique. Le traitement est essentiellement chirurgical, associé à une antibiothérapie adaptée. Les septicémies sont le fait de levures, essentiellement du genre Candida. Le diagnostic en est difficile dans le contexte des brûlés et repose souvent sur une forte suspicion clinique. Leur traitement repose sur les échinocandines et plus secondairement sur le fluconazole. PMID:26668558

  10. CMB lensing tomography with the DES Science Verification galaxies

    DOE PAGESBeta

    Giannantonio, T.

    2016-01-07

    We measure the cross-correlation between the galaxy density in the Dark Energy Survey (DES) Science Verification data and the lensing of the cosmic microwave background (CMB) as reconstructed with the Planck satellite and the South Pole Telescope (SPT). When using the DES main galaxy sample over the full redshift range 0.2 < zphot < 1.2, a cross-correlation signal is detected at 6σ and 4σ with SPT and Planck respectively. We then divide the DES galaxies into five photometric redshift bins, finding significant (>2σ) detections in all bins. Comparing to the fiducial Planck cosmology, we find the redshift evolution of themore » signal matches expectations, although the amplitude is consistently lower than predicted across redshift bins. We test for possible systematics that could affect our result and find no evidence for significant contamination. Finally, we demonstrate how these measurements can be used to constrain the growth of structure across cosmic time. We find the data are fit by a model in which the amplitude of structure in the z < 1.2 universe is 0.73 ± 0.16 times as large as predicted in the LCDM Planck cosmology, a 1.7σ deviation.« less

  11. CMB lensing tomography with the DES Science Verification galaxies

    NASA Astrophysics Data System (ADS)

    Giannantonio, T.; Fosalba, P.; Cawthon, R.; Omori, Y.; Crocce, M.; Elsner, F.; Leistedt, B.; Dodelson, S.; Benoit-Lévy, A.; Gaztañaga, E.; Holder, G.; Peiris, H. V.; Percival, W. J.; Kirk, D.; Bauer, A. H.; Benson, B. A.; Bernstein, G. M.; Carretero, J.; Crawford, T. M.; Crittenden, R.; Huterer, D.; Jain, B.; Krause, E.; Reichardt, C. L.; Ross, A. J.; Simard, G.; Soergel, B.; Stark, A.; Story, K. T.; Vieira, J. D.; Weller, J.; Abbott, T.; Abdalla, F. B.; Allam, S.; Armstrong, R.; Banerji, M.; Bernstein, R. A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Capozzi, D.; Carlstrom, J. E.; Carnero Rosell, A.; Carrasco Kind, M.; Castander, F. J.; Chang, C. L.; Cunha, C. E.; da Costa, L. N.; D'Andrea, C. B.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Eifler, T. F.; Evrard, A. E.; Neto, A. Fausti; Fernandez, E.; Finley, D. A.; Flaugher, B.; Frieman, J.; Gerdes, D.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; Holzapfel, W. L.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Marshall, J. L.; Martini, P.; Melchior, P.; Miquel, R.; Mohr, J. J.; Nichol, R. C.; Nord, B.; Ogando, R.; Plazas, A. A.; Romer, A. K.; Roodman, A.; Rykoff, E. S.; Sako, M.; Saliwanchik, B. R.; Sanchez, E.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, D.; Vikram, V.; Walker, A. R.; Wechsler, R. H.; Zuntz, J.

    2016-03-01

    We measure the cross-correlation between the galaxy density in the Dark Energy Survey (DES) Science Verification data and the lensing of the cosmic microwave background (CMB) as reconstructed with the Planck satellite and the South Pole Telescope (SPT). When using the DES main galaxy sample over the full redshift range 0.2 < zphot < 1.2, a cross-correlation signal is detected at 6σ and 4σ with SPT and Planck , respectively. We then divide the DES galaxies into five photometric redshift bins, finding significant (>2σ) detections in all bins. Comparing to the fiducial Planck cosmology, we find the redshift evolution of the signal matches expectations, although the amplitude is consistently lower than predicted across redshift bins. We test for possible systematics that could affect our result and find no evidence for significant contamination. Finally, we demonstrate how these measurements can be used to constrain the growth of structure across cosmic time. We find the data are fit by a model in which the amplitude of structure in the z < 1.2 universe is 0.73 ± 0.16 times as large as predicted in the Λ cold dark matter Planck cosmology, a 1.7σ deviation.

  12. Annuaire du bureau des Longitudes : guide de données astronomiques 2011 pour l'observation du ciel

    NASA Astrophysics Data System (ADS)

    Institut de Mécanique Céleste Et de Calcul Des Ephémérides (Imcce); Bureau Des Longitudes (Bdl)

    2010-07-01

    Destiné aux astronomes, professionnels ou amateurs, cet ouvrage se décompose de la façon suivante : Les trois premiers chapitres de cet ouvrage contiennent : les données sur les différents calendriers et leur concordance, les fêtes légales en France, les différentes échelles de temps, les dates de décrets sur les heures légales en France métropolitaine parues au Journal Officiel depuis 1916 ; des notions nécessaires à la compréhension et à l'emploi des éphémérides contenues dans l'ouvrage. Les chapitres suivant fournissent des éphémérides astronomiques : les positions du Soleil et de la Lune ; les positions des planètes et de leurs satellites ; les positions des astéroïdes et des comètes ; les explications et des données pour l'observation de la surface du Soleil, de la Lune et des planètes ; des cartes du ciel, une liste de constellations et les positions et occultations des étoiles ; des données sur les éclipses de Soleil et de Lune et sur les phénomènes astronomiques ; la liste des observatoires astronomiques les plus connus.

  13. Annuaire du bureau des Longitudes : guide de données astronomiques 2012 pour l'observation du ciel

    NASA Astrophysics Data System (ADS)

    Institut de Mécanique Céleste Et de Calcul Des Ephémérides (Imcce); Bureau Des Longitudes (Bdl)

    2011-07-01

    Destiné aux astronomes, professionnels ou amateurs, cet ouvrage se décompose de la façon suivante : Les trois premiers chapitres de cet ouvrage contiennent : les données sur les différents calendriers et leur concordance, les fêtes légales en France, les différentes échelles de temps, les dates de décrets sur les heures légales en France métropolitaine parues au Journal Officiel depuis 1916 ; des notions nécessaires à la compréhension et à l'emploi des éphémérides contenues dans l'ouvrage. Les chapitres suivant fournissent des éphémérides astronomiques : les positions du Soleil et de la Lune ; les positions des planètes et de leurs satellites ; les positions des astéroïdes et des comètes ; les explications et des données pour l'observation de la surface du Soleil, de la Lune et des planètes ; des cartes du ciel, une liste de constellations et les positions et occultations des étoiles ; des données sur les éclipses de Soleil et de Lune et sur les phénomènes astronomiques ; la liste des observatoires astronomiques les plus connus.

  14. Que peut-on voir avec des neutrons? Une introduction pour des non spécialistes

    NASA Astrophysics Data System (ADS)

    Schweizer, J.

    2005-11-01

    Le neutron est une particule élémentaire qui a été découverte en 1932 par James Chadwick. Ses caractéristiques principales sont résumées dans le tableau I. Il a été utilisé pour la première fois par Clifford Shull en 1946 comme outil pour des expériences de diffusion. Cette technique s'est depuis constamment développée pour concerner tous les aspects de la matière condensée: physique, chimie, matériaux, biologie. Il s'agit d'un outil tout à fait exceptionnel car le neutron possède des propriétés uniques et particulièrement adaptées pour ces études.

  15. Superfund Record of Decision (EPA Region 7): Des Moines TCE, Des Moines, Polk County, Iowa, July 1986. Final report

    SciTech Connect

    Not Available

    1986-07-21

    The Des Moines TCE site includes the underground infiltration gallery used by the Des Moines Water Works (DMWW) as a source of the public water supply. The site was discovered in 1984 after trichloroethylene (TCE) was detected in the city's public water supply. The Dico Company disposed of an unknown quantity of oily waste sludge containing TCE onto their parking lot for dust control and into a drainage ditch on their property. The primary contaminants of concern include: TCE, PCE, 1,2-dichloroethane, vinyl chloride. The selected remedial action for this site includes: extraction wells to collect the contaminated ground water; isolation of the northern-most section of the north gallery; treatment of the ground water through air stripping to remove 96% of the TCE; discharge of the treated water to the Raccoon River; operation of the west extraction wells until established effluent levels are achieved for four consecutive months.

  16. Tough Composite Materials

    NASA Technical Reports Server (NTRS)

    Vosteen, L. F. (Compiler); Johnson, N. J. (Compiler); Teichman, L. A. (Compiler)

    1984-01-01

    Papers and working group summaries are presented which address composite material behavior and performance improvement. Topic areas include composite fracture toughness and impact characterization, constituent properties and interrelationships, and matrix synthesis and characterization.

  17. Carbon Fibers and Composites

    NASA Technical Reports Server (NTRS)

    Pride, R. A.

    1979-01-01

    The basic nature of composite materials is considered. Carbon fiber composites and their area of current and planned application in civil aircraft are discussed, specifically within the framework of the various aspects of risk analysis.

  18. ACEE composite structures technology

    NASA Technical Reports Server (NTRS)

    Quinlivan, John T.; Wilson, Robert D.; Smith, Peter J.; Johnson, Ronald W.

    1984-01-01

    Toppics addressed include: advanced composites on Boeing commercial aircraft; composite wing durability; damage tolerance technology development; heavily loaded wing panel design; and pressure containment and damage tolerance in fuselages.

  19. Design of electronic composites

    SciTech Connect

    Taya, M.

    1995-12-31

    This report describes the requirements of selected electronic composites with application to electronic packaging, then focuses on the modeling for the microstructure-macrobehavior relation of electronic composites. The modeling depends on the microstructure, percolative and non-percolative.

  20. Heteroporphyrin nanotubes and composites

    DOEpatents

    Shelnutt, John A.; Medforth, Craig J.; Wang, Zhongchun

    2007-05-29

    Heteroporphyrin nanotubes, metal nanostructures, and metal/porphyrin-nanotube composite nanostructures formed using the nanotubes as photocatalysts and structural templates, and the methods for forming the nanotubes and composites.

  1. Heteroporphyrin nanotubes and composites

    DOEpatents

    Shelnutt, John A.; Medforth, Craig J.; Wang, Zhongchun

    2006-11-07

    Heteroporphyrin nanotubes, metal nanostructures, and metal/porphyrin-nanotube composite nanostructures formed using the nanotubes as photocatalysts and structural templates, and the methods for forming the nanotubes and composites.

  2. Thermoset molecular composites

    DOEpatents

    Benicewicz, Brian C.; Douglas, Elliot P.; Hjelm, Jr., Rex P.

    1996-01-01

    A polymeric composition including a liquid crystalline polymer and a thermosettable liquid crystalline monomer matrix, said polymeric composition characterized by a phase separation on the scale of less than about 500 Angstroms and a polymeric composition including a liquid crystalline polymer and a liquid crystalline thermoset matrix, said polymeric composition characterized by a phase separation on the scale of less than about 500 Angstroms are disclosed.

  3. Amorphous metal composites

    DOEpatents

    Byrne, Martin A.; Lupinski, John H.

    1984-01-01

    An improved amorphous metal composite and process of making the composite. The amorphous metal composite comprises amorphous metal (e.g. iron) and a low molecular weight thermosetting polymer binder. The process comprises placing an amorphous metal in particulate form and a thermosetting polymer binder powder into a container, mixing these materials, and applying heat and pressure to convert the mixture into an amorphous metal composite.

  4. Composite fuel cell membranes

    DOEpatents

    Plowman, Keith R.; Rehg, Timothy J.; Davis, Larry W.; Carl, William P.; Cisar, Alan J.; Eastland, Charles S.

    1997-01-01

    A bilayer or trilayer composite ion exchange membrane suitable for use in a fuel cell. The composite membrane has a high equivalent weight thick layer in order to provide sufficient strength and low equivalent weight surface layers for improved electrical performance in a fuel cell. In use, the composite membrane is provided with electrode surface layers. The composite membrane can be composed of a sulfonic fluoropolymer in both core and surface layers.

  5. Nano-composite materials

    DOEpatents

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  6. Composite fuel cell membranes

    DOEpatents

    Plowman, K.R.; Rehg, T.J.; Davis, L.W.; Carl, W.P.; Cisar, A.J.; Eastland, C.S.

    1997-08-05

    A bilayer or trilayer composite ion exchange membrane is described suitable for use in a fuel cell. The composite membrane has a high equivalent weight thick layer in order to provide sufficient strength and low equivalent weight surface layers for improved electrical performance in a fuel cell. In use, the composite membrane is provided with electrode surface layers. The composite membrane can be composed of a sulfonic fluoropolymer in both core and surface layers.

  7. Infiltrated carbon foam composites

    NASA Technical Reports Server (NTRS)

    Lucas, Rick D. (Inventor); Danford, Harry E. (Inventor); Plucinski, Janusz W. (Inventor); Merriman, Douglas J. (Inventor); Blacker, Jesse M. (Inventor)

    2012-01-01

    An infiltrated carbon foam composite and method for making the composite is described. The infiltrated carbon foam composite may include a carbonized carbon aerogel in cells of a carbon foam body and a resin is infiltrated into the carbon foam body filling the cells of the carbon foam body and spaces around the carbonized carbon aerogel. The infiltrated carbon foam composites may be useful for mid-density ablative thermal protection systems.

  8. Advanced composites for windmills

    NASA Astrophysics Data System (ADS)

    Bourquardez, G.

    A development status assessment is conducted for advanced composite construction techniques for windmill blade structures which, as in the case of composite helicopter rotors, promise greater reliability, longer service life, superior performance, and lower costs. Composites in wind turbine applications must bear aerodynamic, inertial and gravitational loads in complex interaction cycles. Attention is given to large Darrieus-type vertical axis windmills, to which composite construction methods may offer highly effective pitch-control mechanisms, especially in the 'umbrella' configuration.

  9. Etudes physiques des mélanges eau-cryoprotecteurs

    NASA Astrophysics Data System (ADS)

    Vassoille, R.; Perez, J.

    The aim of the following review is to present the most important studies concerning the physical properties of water-solutes mixtures used in cryobiology. Cryobiology is a branch of biology which deals with the very low temperature behaviour of cells. This technique is developed today in several directions. The creation of banks of cells and perhaps in a short time of small organs, is the purpose of much research in this domain. Before freezing, living cells are generally put in a solution containing one or more solutes. The role of these solutes is to protect the cells against damage due to crystallization of water (cryoprotectors). The mechanisms of cryoprotection are not well known ; nevertheless the vitreous state formation during cooling is often invoked. So, it is possible to avoid crystallization damage such as mechanical strain (due to an increase of volume of about 10 %) and salt effects (due to osmotic pressure). The conditions in which the vitreous state is obtained, maintained during cooling, storage at low temperature and rewarming can be defined by physical studies presented in the following review. Le présent travail est essentiellement une revue bibliographique des principales études physiques qui ont été réalisées avec des solutions de composés habituellement employés en cryobiologie. La cryobiologie est une branche de la biologie qui s'intéresse au comportement des cellules à basse température. Cette discipline est actuellement en plein développement dans des domaines très divers. Son principal but est la création de banques de cellules de plus en plus complexes avec comme perspective la conservation des organes. Les cellules vivantes sont généralement placées avant congélation dans une solution contenant divers composés dont le rôle est de protéger les cellules contre les effets de la cristallisation de l'eau. L'action protectrice de ces cryoprotecteurs est encore mal connue; cependant, la formation d'un état vitreux lors du

  10. Oxygen and strontium isotope tracing of human migration at the Bell Beaker site Le Tumulus des Sables, France.

    NASA Astrophysics Data System (ADS)

    Willmes, Malte; James, Hannah; Boel, Ceridwen; Courtaud, Patrice; Chancerel, Antoine; McMorrow, Linda; Armstrong, Richard; Kinsley, Les; Aubert, Maxime; Eggins, Stephen; Moffat, Ian; Grün, Rainer

    2014-05-01

    Oxygen (δ18O) and strontium (87Sr/86Sr) isotopes were used as tools to investigate human migration at the early Bell Beaker site (2500-2000 BC) Le Tumulus des Sables, Saint-Laurent-Médoc, south-west France. The O and Sr isotope ratios measured in tooth enamel record the average dietary isotope signature ingested by that individual during their childhood. When this data is compared to the isotope signature of the burial site it can be used to indicate if the individual migrated into this area during their lifetime. The O isotopic composition of meteoric water changes depending on climate, temperature and quantity of precipitation. O isotope ratios in skeletal and dental remains are related to body water, which in turn is influenced by diet, physiology and climate. Most of the water consumed by large mammals comes from drinking water, typically sourced locally. Sr isotope ratios on the other hand vary between different geologic regions, depending on their age and composition. Sr is released through weathering and transported into the soil, ground and surface water, where it becomes available for uptake by plants, enters the food cycle and eventually ends up in skeletal and dental tissue where it substitutes for calcium. We analysed the teeth of 18 adult and 8 juvenile disarticulated skeletons from Le Tumulus des Sables. O isotopes were analysed in-situ by Sensitive High Resolution Ion Micro Probe (SHRIMP).The Sr isotope analysis involved drilling a 0.2-0.5 mg sample of enamel from the tooth. The Sr was then chemically separated and analysed by Thermal Ionization Mass Spectrometry (TIMS). These results were then compared to the O isoscape of Europe and bioavailable Sr isotope data (fauna, plants, soils) from the IRHUM database. We found that most of the individuals at Le Tumulus des Sables show O and Sr isotope ratios corresponding to the local environmental signal and we interpret these as part of the local population. 3 adults however show slightly higher 87Sr/86

  11. Solid polymer electrolyte compositions

    DOEpatents

    Garbe, James E.; Atanasoski, Radoslav; Hamrock, Steven J.; Le, Dinh Ba

    2001-01-01

    An electrolyte composition is featured that includes a solid, ionically conductive polymer, organically modified oxide particles that include organic groups covalently bonded to the oxide particles, and an alkali metal salt. The electrolyte composition is free of lithiated zeolite. The invention also features cells that incorporate the electrolyte composition.

  12. Phase change compositions

    DOEpatents

    Salyer, Ival O.

    1989-01-01

    Compositions containing crystalline, straight chain, alkyl hydrocarbons as phase change materials including cementitious compositions containing the alkyl hydrocarbons neat or in pellets or granules formed by incorporating the alkyl hydrocarbons in polymers or rubbers; and polymeric or elastomeric compositions containing alkyl hydrocarbons.

  13. Phase change compositions

    DOEpatents

    Salyer, Ival O.; Griffen, Charles W.

    1986-01-01

    Compositions containing crystalline, long chain, alkyl hydrocarbons as phase change materials including cementitious compositions containing the alkyl hydrocarbons neat or in pellets or granules formed by incorporating the alkyl hydrocarbons in polymers or rubbers; and polymeric or elastomeric compositions containing alkyl hydrocarbons.

  14. Metal etching composition

    NASA Technical Reports Server (NTRS)

    Otousa, Joseph E. (Inventor); Thomas, Clark S. (Inventor); Foster, Robert E. (Inventor)

    1991-01-01

    The present invention is directed to a chemical etching composition for etching metals or metallic alloys. The composition includes a solution of hydrochloric acid, phosphoric acid, ethylene glycol, and an oxidizing agent. The etching composition is particularly useful for etching metal surfaces in preparation for subsequent fluorescent penetrant inspection.

  15. Refiguring Composition through Theory

    ERIC Educational Resources Information Center

    Lynch-Biniek, Amy

    2009-01-01

    In this dissertation, I argue that curricular choices in Composition are overdetermined by the academic labor system and its negative effect on the status of composition theory. Despite the growth of disciplinary knowledge, composition programs are still staffed largely with underpaid and under supported faculty and graduate students, many of whom…

  16. Composite Golf Clubs

    NASA Technical Reports Server (NTRS)

    1976-01-01

    Babcock & Wilcox Co. under a partnership with Marshall Space Flight Center, produced composite materials, originally from the shuttle program, for improving golf clubs. Company used Marshall Space Flight Center's data summary file summarizing typical processing techniques and mechanical and physical properties of graphite and boron- reinforced composite materials. Reinforced composites provide combination of shaft rigidity and flexibility that provide maximum distance.

  17. Superfund Record of Decision (EPA Region 7): Des Moines TCE Site, Operable Unit 3, Des Moines, IA. (Second remedial action), September 1992. Final report

    SciTech Connect

    Not Available

    1992-09-18

    The Des Moines TCE site is located southwest of downtown Des Moines, Polk County, Iowa. Land use in the area is predominantly industrial and commercial, and part of the site lies within the floodplain of the Raccoon River. Water from the Des Moines Water Works north infiltration gallery was found to be contaminated with trichloroethylene (TCE), dichloroethylene (DCE), and vinyl chloride at levels above accepted drinking water standards. The ROD addresses OU3, which encompasses potential sources of ground water contamination in an area north of the Raccoon River. The selected remedial action for OU3 includes no action with periodic groundwater monitoring.

  18. Caracterisation du coefficient de retrodiffusion radar des surfaces d'hydrocarbure: Modelisation et interpretation

    NASA Astrophysics Data System (ADS)

    Charbonneau, Francois

    La surveillance maritime est un domaine d'applications ou l'interet politique et scientifique croit constamment au Canada. Un des outils privilegies pour la surveillance maritime est l'acquisition de donnees radars, par des systemes aeroportes ou spatio-portes (ERS-2, RADARSAT et Envisat). Par leur grande couverture spatiale, ainsi que leur sensibilite a la geometrie de surface, les donnees radars permettent, en autres, la detection de cibles ponctuelles (bateaux), estimation des vents, detection des glaces de mer, ainsi que la detection de deversement d'hydrocarbure. Les limites et les avantages de la detection d'hydrocarbure par acquisitions de donnees radars sont bien connus, mais il reste encore des lacunes au niveau de l'extraction des parametres physiques d'une surface d'hydrocarbure. Ce projet a pour objectif de caracteriser le coefficient de retrodiffusion radar associe a une surface d'hydrocarbure en milieu oceanique, par l'introduction d'un modele thermodynamique d'attenuation de la surface, au modele theorique radar IEM. Le modele global permet de simuler le comportement de sigma° en fonction des proprietes visco-elastiques, ainsi que de l'epaisseur de la couche d'hydrocarbure et en fonction des parametres d'acquisition radar. Le modele developpe fut valide a partir des donnees SIR-C acquises lors d'experimentations controlees. A partir des informations environnementales et du type d'hydrocarbure, notre modele a permis d'estime le contraste d'intensite avec une precision de 1 a 1,5 dB, a la bande C. Alors qu'a la bande L, l'erreur sur le contraste est d'environ 1,5 a 2 dB sur l'ensemble des mesures. Ce qui est excellant considerant l'heterogeneite des surfaces analysees. Egalement, nous effectuons des analyses multi-polarisees et polarimetriques avec les donnees SIR-C acquises au-dessus de sites experimentaux. II en ressort que le ratio de polarisation VV/HH, ainsi que le facteur d'anisotropie sont des pistes de recherche prometteuses qu'il faudra

  19. Environnement des Systèmes Binaires Jeunes

    NASA Astrophysics Data System (ADS)

    Duchene, Gaspard

    2000-07-01

    La fréquence élevée des systèmes binaires, tant parmi les étoiles de la séquence principale que dans les régions de formation stellaire, a été largement mise en évidence au cours des dix dernières années. Cette constatation soulève naturellement la question de la nature du processus responsable de la formation préférentielle de ces systèmes multiples. Par ailleurs, les phénomènes d'interaction entre un compagnon et l'environnement complexe d'une étoile T Tauri sont encore trèsmal compris. C'est dans ce cadre que se place le travail conduit durant cette thèse, dont les principaux objectifs sont: i) la détermination de la fraction de binaires dans différentes populations pré-séquence principale, ii) l'étude quantitative du phénomène d'accrétion dans les systèmes binaires T Tauri, et iii) l'observation directe et la modélisation de disques circumstellaires et circumbinaires. Dans le cadre d'une recherche de binaires visuelles à l'aide du système d'optique adaptative du Télescope Canada-France-Hawaii, j'ai pris part à l'observation de plusieurs centaines d'objets situés dans différents amas stellaires jeunes. Je détaille ici l'analyse et les résultats concernant deux amas âgés de moins de deux millions d'années. Lorsqu'on considère l'ensemble des populations étudiées jusqu'à présent, on constate que la proportion de binaires visuelles parmi les étoiles de type solaire est la même dans les amas stellaires que sur la séquence principale. De plus, cette propriété ne dépend pas de l'âge de l'amas, ce qui implique que la fraction de binaires n'évolue pas après le premier million d'années dans ces amas. A l'opposé, les zones de formation peu denses, qui sont toutes très jeunes, possèdent une proportion de binaires sensiblement plus élevée. Les modèles les plus à même de reproduire ces observations sont ceux selon lesquels la fraction de binaires qui résulte de l'effondrement gravitationnel est proche de 100

  20. La prévention des blessures dans les terrains de jeux

    PubMed Central

    Fuselli, Pamela; Yanchar, Natalie L

    2012-01-01

    RÉSUMÉ Dans un climat d’inquiétude croissante à l’égard de l’obésité juvénile et de l’inactivité, les terrains de jeux permettent aux enfants d’être actifs. Ils comportent toutefois aussi des risques, les blessures causées par des chutes étant de loin les plus courants. Les recherches démontrent la possibilité de réduire les blessures dans les terrains de jeux si on abaisse la hauteur des structures de jeu et si on utilise des surfaces molles et profondes pour amortir les chutes. L’Association canadienne de normalisation a publié des normes volontaires qu’elle a mises à jour plusieurs fois pour tenir compte de ces risques. Afin de contribuer à les réduire, les parents peuvent respecter des stratégies simples. Le présent document de principes souligne le fardeau des blessures subies dans les terrains de jeux. Il procure également aux parents et aux dispensateurs de soins des occasions de réduire l’incidence et la gravité des blessures grâce à l’éducation et à la défense d’intérêts, ainsi que de mettre en œuvre des normes de sécurité probantes et des stratégies plus sécuritaires dans les terrains de jeux locaux. Enfin, il remplace le document de principes de la Société canadienne de pédiatrie publié en 2002 sur le sujet.

  1. ACEE composite structures technology

    NASA Technical Reports Server (NTRS)

    Klotzsche, M. (Compiler)

    1984-01-01

    The NASA Aircraft Energy Efficiency (ACEE) Composite Primary Aircraft Structures Program has made significant progress in the development of technology for advanced composites in commercial aircraft. Commercial airframe manufacturers have demonstrated technology readiness and cost effectiveness of advanced composites for secondary and medium primary components and have initiated a concerted program to develop the data base required for efficient application to safety-of-flight wing and fuselage structures. Oral presentations were compiled into five papers. Topics addressed include: damage tolerance and failsafe testing of composite vertical stabilizer; optimization of composite multi-row bolted joints; large wing joint demonstation components; and joints and cutouts in fuselage structure.

  2. Developing composite signatures

    NASA Astrophysics Data System (ADS)

    Hawley, Chadwick T.; Carpenter, Tom; Cappelaere, Patrice G.; Frye, Stu; Lemoigne-Stewart, Jacqueline J.; Mandle, Dan; Montgomery, Sarah; Williams-Bess, Autumn

    2011-06-01

    A composite signature is a group of signatures that are related in such a way to more completely or further define a target or operational endeavor at a higher fidelity. This paper explores the merits of using composite signatures, in lieu of waiting for opportunities for the more elusive diagnostic signatures, to satisfy key essential elements of information Keywords: signature, composite signature, civil disaster (EEI) associated with civil disaster-related problems. It discusses efforts to refine composite signature development methodology and quantify the relative value of composite vs. diagnostic signatures. The objectives are to: 1) investigate and develop innovative composite signatures associated with civil disasters, including physical, chemical and pattern/behavioral; 2) explore the feasibility of collecting representative composite signatures using current and emerging intelligence, surveillance, and reconnaissance (ISR) collection architectures leveraging civilian and commercial architectures; and 3) collaborate extensively with scientists and engineers from U.S. government organizations and laboratories, the defense industry, and academic institutions.

  3. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1984-01-01

    Progress is reported in studies of constituent materials composite materials, generic structural elements, processing science technology, and maintaining long-term structural integrity. Topics discussed include: mechanical properties of high performance carbon fibers; fatigue in composite materials; experimental and theoretical studies of moisture and temperature effects on the mechanical properties of graphite-epoxy laminates and neat resins; numerical investigations of the micromechanics of composite fracture; delamination failures of composite laminates; effect of notch size on composite laminates; improved beam theory for anisotropic materials; variation of resin properties through the thickness of cured samples; numerical analysis composite processing; heat treatment of metal matrix composites, and the RP-1 and RP2 gliders of the sailplane project.

  4. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, Robert G.; Wiberley, Stephen E.

    1987-01-01

    The development and application of composite materials to aerospace vehicle structures which began in the mid 1960's has now progressed to the point where what can be considered entire airframes are being designed and built using composites. Issues related to the fabrication of non-resin matrix composites and the micro, mezzo and macromechanics of thermoplastic and metal matrix composites are emphasized. Several research efforts are presented. They are entitled: (1) The effects of chemical vapor deposition and thermal treatments on the properties of pitch-based carbon fiber; (2) Inelastic deformation of metal matrix laminates; (3) Analysis of fatigue damage in fibrous MMC laminates; (4) Delamination fracture toughness in thermoplastic matrix composites; (5) Numerical investigation of the microhardness of composite fracture; and (6) General beam theory for composite structures.

  5. Advanced composites X

    SciTech Connect

    1994-12-31

    In the past ten years, high volume, high performance applications of advanced composites in transportation have grown substantially. The 10th annual ASM/ESD Advanced Composites Conference and Exposition presents the latest developments in composite applications and technologies with over 70 papers presented. The conference is organized in tracks covering body, chassis, powertrain and infrastructure applications, material sciences, manufacturing processes and recycling. Polymer composite and metal matrix composite technologies are included throughout. Body sessions feature adhesive bonding, analysis and test methods and crash energy absorption. The Chassis sessions showcase polymer and metal composite applications. The Powertrain/Propulsion track includes emerging materials as well as design and processing case studies. The Materials Science track features papers on new materials, their performance and theoretical treatment. Manufacturing Processes sessions cover process, modelling, fiber preforming and emerging manufacturing methods. The Infrastructure and Recycling track includes a panel discussion of infrastructure applications and technical papers on the recycling of polymer composites and nondestructive testing.

  6. "Complex" Posttraumatic Stress Disorder/Disorders of Extreme Stress (CP/DES) in Sexually Abused Children: An Exloratory Study.

    ERIC Educational Resources Information Center

    Hall, Darlene Kordich

    1999-01-01

    Compares three groups of young sexually abused children on seven "Complex" Posttraumatic Stress Disorder/Disorders of Extreme Stress (CP/DES) indices. As cumulative number of types of trauma increased, the number of CP/DES symptoms rose. Results suggest that CP/DES also characterizes sexually abused children, especially those who have been…

  7. The Des Moines Plan: A Plan for Student Success, 1987-88. Report of Evaluation.

    ERIC Educational Resources Information Center

    Schnelker, Diane; Tompkins, John

    The comprehensive Des Moines Plan (DMP) for Des Moines, Iowa elementary through high school students throughout the district who require academic support was evaluated, as implemented during 1987-88. The plan represents an expansion and reorganization of all district remedial programs, and receives federal, state, and local funding. The DMP…

  8. Le contrôle des infections au cabinet du pédiatre

    PubMed Central

    2008-01-01

    RÉSUMÉ La transmission des infections au cabinet du pédiatre est de plus en plus préoccupante. Le présent document expose les voies de transmission des infections et les principes sous-jacents aux mesures actuelles pour contrôler les infections. Pour prévenir les infections, il faut bien concevoir le cabinet et adopter des politiques administratives et de triage convenables, de même que des pratiques de base pour les soins de tous les patients (p. ex., hygiène des mains, port de gants, de masques, de lunettes de protection et d’une blouse d’hôpital pour des interventions précises; nettoyage, désinfection et stérilisation convenables des surfaces et du matériel, y compris les jouets, et techniques d’asepsie en cas d’interventions effractives) et des précautions additionnelles en cas d’infections précises. Le personnel doit avoir reçu les vaccins pertinents, et les personnes infectées doivent respecter les politiques de restriction au travail.

  9. Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

    PubMed Central

    Kahan, Meldon; Mailis-Gagnon, Angela; Wilson, Lynn; Srivastava, Anita

    2011-01-01

    Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique des lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse, produites par le National Opioid Use Guideline Group. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale sur l’efficacité et l’innocuité des opioïdes pour la douleur chronique non cancéreuse et ont rédigé une série de recommandations. Un panel de 49 cliniciens experts de toutes les régions du Canada ont passé en revue l’ébauche et ont atteint un consensus sur 24 recommandations. Message principal Il est recommandé de faire un dépistage du risque de dépendance avant de prescrire des opioïdes. On recommande des opioïdes faibles (codéine et tramadol) pour une douleur de légère à modérée qui n’a pas répondu aux traitements de première intention. On peut essayer l’oxycodone, l’hydromorphone et la morphine chez les patients qui n’ont pas eu de soulagement avec des opioïdes plus faibles. Une faible dose initiale et une lente hausse du titrage sont recommandées, ainsi qu’une étroite surveillance du patient qu’on a d’abord renseigné. Les médecins doivent surveiller l’apparition de complications comme l’apnée du sommeil. La dose optimale est celle qui améliore le fonctionnement ou atténue les cotes d’évaluation de la douleur d’au moins 30 %. Pour la grande majorité des patients, la dose optimale sera bien en deçà de l’équivalent de 200 mg de morphine par jour. On recommande le sevrage progressif pour les patients qui n’ont pas répondu à un essai d’opioïdes adéquat. Conclusion Les opioïdes jouent un rôle important dans la prise en charge de la douleur chronique non cancéreuse, mais il faut en prescrire avec prudence pour limiter les dommages potentiels. Les nouvelles lignes directrices

  10. Comprendre la maltraitance des aînés en pratique familiale

    PubMed Central

    Yaffe, Mark J.; Tazkarji, Bachir

    2012-01-01

    Résumé Objectif Présenter ce qui constitue la maltraitance des aînés, ce dont les médecins de famille devraient être au courant, les signes et les symptômes laissant présager de mauvais traitements chez des adultes plus âgés, comment l’outil Elder Abuse Suspicion Index peut aider à détecter la maltraitance et les options qui existent pour réagir en cas de soupçons de maltraitance. Sources des données On a fait une recension dans MEDLINE, PsycINFO et Social Work Abstracts pour trouver des publications en français ou en anglais, de 1970 à 2011, à l’aide des expressions elder abuse, elder neglect, elder mistreatment, seniors, older adults, violence, identification, detection tools et signs and symptoms. Les publications pertinentes ont fait l’objet d’un examen. Message principal La maltraitance des aînés est une cause importante de morbidité et de mortalité chez les adultes plus âgés. Si les médecins de famille sont bien placés pour détecter des mauvais traitements infligés aux aînés, leurs taux réels de signalement de cas de maltraitance sont plus faibles que dans d’autres professions. Cette situation pourrait s’améliorer s’ils comprenaient mieux les genres d’agissements qui constituent de la maltraitance des aînés, ainsi que les signes et les symptômes observés au bureau qui pourraient pointer vers des cas de mauvais traitements. La détection de tels cas pourrait être facilitée par le recours à un court outil validé, comme l’Elder Abuse Suspicion Index. Conclusion Les médecins de famille peuvent jouer un rôle plus important dans la détection d’une éventuelle maltraitance des aînés. Une fois qu’on soupçonne de mauvais traitements, il existe dans la plupart des communautés des services sociaux ou des forces de l’ordre accessibles pour effectuer des évaluations plus approfondies et intervenir.

  11. What We Did Last Summer: Depicting DES Data to Enhance Simulation Utility and Use

    NASA Technical Reports Server (NTRS)

    Elfrey, Priscilla; Conroy, Mike; Lagares, Jose G.; Mann, David; Fahmi, Mona

    2009-01-01

    At Kennedy Space Center (KSC), an important use of Discrete Event Simulation (DES) addresses ground operations .of missions to space. DES allows managers, scientists and engineers to assess the number of missions KSC can complete on a given schedule within different facilities, the effects of various configurations of resources and detect possible problems or unwanted situations. For fifteen years, DES has supported KSC efficiency, cost savings and improved safety and performance. The dense and abstract DES data, however, proves difficult to comprehend and, NASA managers realized, is subject to misinterpretation, misunderstanding and even, misuse. In summer 2008, KSC developed and implemented a NASA Exploration Systems Mission Directorate (ESMD) project based on the premise that visualization could enhance NASA's understanding and use of DES.

  12. La prévention des infections par le virus respiratoire syncytial

    PubMed Central

    Robinson, JL

    2011-01-01

    RÉSUMÉ L’infection par le virus respiratoire syncytial (VRS) est la principale cause d’infections des voies respiratoires inférieures chez les jeunes enfants. Le palivizumab, un anticorps monoclonal anti-VRS, réduit le taux d’hospitalisation des enfants à haut risque mais est très coûteux. Le présent document de principes remplace les trois précédents documents de principes de la Société canadienne de pédiatrie sur le sujet et est mis à jour principalement pour traiter des récentes modifications aux lignes directrices de l’American Academy of Pediatrics dans le contexte canadien. Il contient une analyse des publications ainsi que des recommandations au sujet de l’utilisation du palivizumab chez les enfants à haut risque

  13. Approche à l’égard des nouveaux anticoagulants oraux en pratique familiale

    PubMed Central

    Douketis, James; Bell, Alan David; Eikelboom, John; Liew, Aaron

    2014-01-01

    Résumé Objectif Comparer les caractéristiques principales des nouveaux anticoagulants oraux (NACO), soit le dabigatran, le rivaroxaban et l’apixaban, et répondre aux questions qui font surface lors de la comparaison de ces agents. Qualité des données Une recherche dans PubMed a été effectuée afin de relever les études cliniques récentes (de janvier 2008 à la semaine 32 de 2013) portant sur l’emploi des NACO pour la prévention des AVC dans les cas de fibrillation auriculaire (FA) et pour le traitement de la thromboembolie veineuse aiguë. Message principal Selon 3 essais d’envergure, tous les NACO sont au moins aussi efficaces que la warfarine dans la prévention des AVC chez les patients atteints d’une FA non valvulaire, et au moins aussi sûrs pour ce qui est du risque de saignement. Des méta-analyses de ces essais ont montré que, comparativement au traitement par la warfarine, les NACO avaient réduit la mortalité totale, la mortalité d’origine cardiovasculaire et les saignements intracrâniens, et était aussi ressortie une tendance vers la réduction des saignements généraux. Du côté pratique, les avantages des NACO par rapport à la warfarine sont : posologie orale fixe uniquotidienne ou biquotidienne sans devoir surveiller la coagulation et peu d’interactions connues ou définies avec d’autres médicaments ou des aliments. Les désavantages potentiels des NACO sont notamment un risque de saignement qui serait accru chez les patients de plus de 75 ans, une hausse des saignements gastro-intestinaux majeurs avec des doses élevées de dabigatran, une hausse des cas de dyspepsie avec le dabigatran, l’absence d’un test de laboratoire de routine visant à mesurer de façon fiable l’effet anticoagulant et l’absence d’antidote pour renverser l’effet anticoagulant. Aucun essai randomisé contrôlé n’a effectué de comparaison directe des NACO, et le choix d’un NACO est influencé par les caract

  14. Prévalence des cervicalgies et douleurs des membres supérieures chez les utilisateurs d'ordinateur en milieu professionnel à Casablanca (Maroc)

    PubMed Central

    Seknaji, Nawal; Rachidi, Wafaa; Hassoune, Samira; Janani, Saadia; Nani, Samira; Maaroufi, Abderrahmane; Mkinsi, Ouafaa

    2013-01-01

    Introduction Les cervicalgies et douleurs du membre supérieur (CDMS) affectent des millions d'utilisateurs d'ordinateurs dans les pays développés. L'objectif de ce travail était de déterminer la prévalence des cervicalgies et douleurs du membre supérieur (CDMS) à Casablanca et identifier les différents facteurs de risque qui y sont impliqués, afin de définir les sous-groupes à haut risque, et d’établir des plans d'intervention efficaces. Méthodes Il s'agit d'une étude transversale, menée chez 118 employés de bureau francophones et utilisant l'ordinateur, à Casablanca. Les données ont été collectées de Décembre 2011 à Juin 2012, en utilisant la version française d'un questionnaire validé: Maastricht-Upper-extremity-Questionnaire. Résultats 118 utilisateurs d'ordinateur en milieu professionnel ont été recrutés. Parmi les employés enquêtés, 93% ont rapporté des CDMS localisées au moins à un site. Les plaintes les plus fréquemment rapportées étaient les douleurs des épaules et les cervicalgies (48,3% et 46,6% respectivement). Nous n'avons pas remarqué de différence significative des fréquences des douleurs selon le genre. Nos résultats concordent avec les données de la littérature où il existe un certain consensus quant à l'impact des mauvaises conditions ergonomiques sur les troubles musculo-squelettiques du membre supérieur en milieu professionnel. De même, les études récentes examinant les effets combinés et/ou interactifs tant des facteurs biomécaniques/physiques que de facteurs psychosociaux professionnels vont de pair avec nos résultats. Conclusion Il en ressort que les stratégies d'intervention visant à réduire les CDMS doivent agir essentiellement sur 3 volets, le premier correspond à l'amélioration et la sensibilisation quant au respect des conditions ergonomiques, le second concerne l'amélioration des conditions psychosociales. Enfin le troisième volet vise la rationalisant de la demande de

  15. Etude des defauts apparaissant dans les amenagements interieurs des avions d'affaires

    NASA Astrophysics Data System (ADS)

    Charette, Emilie

    The evolution of the aeronautic industry led to the development of new materials for these high performance applications. Among other examples, composite sandwich structures are increasingly used for interior body panels of business airplanes. These structures are assembled and fixed to the fuselage using metallic inserts bonded inside the sandwich panels with an epoxy resin adhesive. A thin film of wood veneer covers the visible side of interior furniture in order to bring sophistication and esthetic to the interior design. However, due to multiple factors, surface defects frequently appear on the veneered side of the panel where inserts are located. Moreover the defects tend to appear months after the airplane delivery causing costly reparations. The sources of defects can be mechanical ( deformation due to an excessive tightening), chemical (shrinkage of the epoxy adhesive) or the result of hygrothermal exposition. It is therefore important to understand the source of such surface defects and ultimately prevent or control their appearance. The present thesis deals with defects from chemical and hygrothermal sources appearing on the composite panels used on the interior body of business jets after aging. The main objective was to identify and quantify phenomena causing the defects on the interior panels of business planes. This research project is the first part of a project sponsored by CRIAQ and NSERC. The interaction of several materials can lead to various phenomena causing the apparition of surface defects. The project was thus divided into three parts in order to study an increasingly complex problem. the first study deals with the characterization of the different constitutive materials taken separately. This first part focused on thermal, rheological and mechanical aspects of epoxy adhesives. It was shown that the two adhesives used have different mechanical properties and cure kinetic reactions. In addition, the mechanical properties of sandwich

  16. Cosmology from Cosmic Shear with DES Science Verification Data

    SciTech Connect

    Abbott, T.

    2015-07-20

    We present the first constraints on cosmology from the Dark Energy Survey (DES), using weak lensing measurements from the preliminary Science Verification (SV) data. We use 139 square degrees of SV data, which is less than 3% of the full DES survey area. Using cosmic shear 2-point measurements over three redshift bins we find σ8(m=0.3)0.5 = 0:81 ± 0:06 (68% confidence), after marginalising over 7 systematics parameters and 3 other cosmological parameters. Furthermore, we examine the robustness of our results to the choice of data vector and systematics assumed, and find them to be stable. About 20% of our error bar comes from marginalising over shear and photometric redshift calibration uncertainties. The current state-of-the-art cosmic shear measurements from CFHTLenS are mildly discrepant with the cosmological constraints from Planck CMB data. Our results are consistent with both datasets. Our uncertainties are ~30% larger than those from CFHTLenS when we carry out a comparable analysis of the two datasets, which we attribute largely to the lower number density of our shear catalogue. We investigate constraints on dark energy and find that, with this small fraction of the full survey, the DES SV constraints make negligible impact on the Planck constraints. The moderate disagreement between the CFHTLenS and Planck values of σ8m=0.3)0.5 is present regardless of the value of w.

  17. DES exposure checker: Dark Energy Survey image quality control crowdsourcer

    NASA Astrophysics Data System (ADS)

    Melchior, Peter; Sheldon, Erin; Drlica-Wagner, Alex; Rykoff, Eli S.

    2015-11-01

    DES exposure checker renders science-grade images directly to a web browser and allows users to mark problematic features from a set of predefined classes, thus allowing image quality control for the Dark Energy Survey to be crowdsourced through its web application. Users can also generate custom labels to help identify previously unknown problem classes; generated reports are fed back to hardware and software experts to help mitigate and eliminate recognized issues. These problem reports allow rapid correction of artifacts that otherwise may be too subtle or infrequent to be recognized.

  18. LANDSAT-4 image data quality analysis. [Des Moines, Iowa area

    NASA Technical Reports Server (NTRS)

    Anuta, P. E.

    1983-01-01

    Seven heterogeneous areas within the Des Moines, Iowa area test site were selected to define candidate spectral training classes using a clustering algorithm. In addition to the 91 cluster (nonsupervised) classes, three supervised training classes were defined and subsequently included in the training statistics file. The identity of all 94 candidate classes were determined using available reference data. Through analysis of the interclass separabilities, the original 94 candidate training classes were reduced to 42 spectrally separable final classes. The minimum average transformed divergence values for the 42 spectral classes and for the best subsets of TM spectral bands are shown in a table.

  19. Prise en charge des traumatismes graves du rein

    PubMed Central

    Lakmichi, Mohamed Amine; Jarir, Redouane; Sadiki, Bader; Zehraoui; Bentani; Wakrim, Bader; Dahami, Zakaria; Moudouni; Sarf, Ismail

    2015-01-01

    Les traumatismes graves du rein de grade III, IV et V selon la classification de l'Amercan Society for Surgery For Trauma (ASST) sont plus rares et se retrouvent dans 5% des cas en moyenne. Leur prise en charge est souvent délicate, nécessitant alors des centres expérimentés dotés de moyen adéquats d'imagerie (scanner spiralé). Cependant, durant ces dernières années, la prise en charge de ces traumatismes a évolué vers une attitude de moins en moins chirurgicale grâce à l’évolution des techniques de la radiologie interventionnelle, de l'endourologie et des moyens de surveillance aux urgences et de réanimation. L'objectif de cette étude est d’évaluer notre expérience dans la prise en charge des traumatismes rénaux de haut grade. Notre étude rétrospective porte sur 25 cas de traumatismes grave du rein de grade III, IV et V selon la classification de l'ASST, colligés entre Janvier 2002 et Juin 2009 au service d'urologie du centre Hospitalier Universitaire Mohammed VI, Université Cadi Ayyad de Marrakech, Maroc. Nous avons étudié les données épidémiologiques, les signes cliniques et biologiques à l'admission (état de choc hémorragique, taux d'hémoglobine), les données radiologiques (échographie et scanner), les lésions associées, la prise en charge thérapeutique et les complications. L’âge moyen de nos patients était de 24,9 ans 15 et 58 ans, avec une prédominance masculine (sex-ratio = 7, 3). Le rein droit était intéressé dans 15 cas (60%). Le traumatisme rénal était fermé dans 15 cas, et ouvert par arme blanche dans 10 cas. Huit patients se sont présentés en état de choc hémorragique (32%). Une anémie inférieur à 10g /100ml a été observée dans 10 cas (40%). L'uroscanner fait systématiquement à l'admission a retrouvé un grade III (10 cas), grade IV (13 cas) et grade V (2 cas). La prise en charge a consisté en une exploration chirurgicale avec néphrectomie chez 2 cas de Grade IV pour une instabilité h

  20. Le syndrome des brides amniotiques et ses difficultés diagnostiques et de prise en charge au Burkina Faso

    PubMed Central

    Nagalo, Kisito; Badiel, Roger; Kouéta, Fla; Tall, François Housséini; Yé, Diarra

    2015-01-01

    Le syndrome des brides amniotiques est une embryo-foetopathie rare, d’étiopathogénie encore inconnue, caractérisé par des malformations crânio-faciales, thoraco-abdominales, des membres et des extrémités. Afin de discuter des difficultés diagnostiques et thérapeutiques du syndrome des brides amniotiques, nous rapportons cinq cas de ce syndrome. Ces cas représentaient autant de phénotypes de la maladie mais avec quelques singularités. Les deux premiers étaient des cas de maladie des brides amniotiques caractérisés l'un par une amputation d'un membre inférieur associée à des lésions cutanées et à une surdité, l'autre par des strictions avec amputation des doigts associées à une fente labio-palatine, une cataracte congénitale et un strabisme. Les trois autres cas correspondaient à des formes létales du Limb Body Wall Complex dont deux avec attache placento-crânienne et un avec attache placento-abdominale. Le renforcement du diagnostic anténatal, l'instauration du conseil génétique et la mise en place d'un registre national des malformations devraient permettre d'améliorer la prise en charge des cas du syndrome des brides amniotiques. PMID:26113939

  1. DOSAGE DES ELEMENTS EN TRACE DES CALCAIRES AU SERVICE DE L'ARCHEOLOGIE

    SciTech Connect

    BLANC,A.; HOLMES,L.; HARBOTTLE,G.

    1998-05-01

    Numerous quarries in the Lutetian limestone formations of the Paris Basin provided stone for the building and the decoration of monuments from antiquity to the present. To determine the origin of stone used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 samples. Petrographic and paleontologic examination of thin sections allows geologists to distinguish Lutetian limestones from Jurassic and Cretaceous limestones. Geologists also seek to formulate hypotheses regarding the origin of Lutetian limestones used for building and sculpture in the Paris region. In the search for the sources of building and sculptural stone, the analytical methods of geologists are limited because often several quarries produce the same lithofacies. A new tool is now available, however, to attack questions of provenance raised by art historians. Because limestones from different sources have distinctive patterns of trace-element concentrations, compositional analysis by neutron activation allows them to compare building or sculptural stone from one monument with stone from quarries or other monuments. This analytical method subjects a powdered limestone sample to standard neutron activation analysis procedures at Brookhaven National Laboratory. With the help of computer programs, the compositional fingerprints of Lutetian limestones can be determined and stored in a database. The limestone database contains data for approximately 2,100 samples from monuments, sculptures and quarries. It is particularly rich in samples from the Paris Basin.

  2. Suite versus composite statistics

    USGS Publications Warehouse

    Balsillie, J.H.; Tanner, W.F.

    1999-01-01

    Suite and composite methodologies, two statistically valid approaches for producing statistical descriptive measures, are investigated for sample groups representing a probability distribution where, in addition, each sample is probability distribution. Suite and composite means (first moment measures) are always equivalent. Composite standard deviations (second moment measures) are always larger than suite standard deviations. Suite and composite values for higher moment measures have more complex relationships. Very seldom, however, are they equivalent, and they normally yield statistically significant but different results. Multiple samples are preferable to single samples (including composites) because they permit the investigator to examine sample-to-sample variability. These and other relationships for suite and composite probability distribution analyses are investigated and reported using granulometric data.

  3. Hydrogen storage compositions

    DOEpatents

    Li, Wen; Vajo, John J.; Cumberland, Robert W.; Liu, Ping

    2011-04-19

    Compositions for hydrogen storage and methods of making such compositions employ an alloy that exhibits reversible formation/deformation of BH.sub.4.sup.- anions. The composition includes a ternary alloy including magnesium, boron and a metal and a metal hydride. The ternary alloy and the metal hydride are present in an amount sufficient to render the composition capable of hydrogen storage. The molar ratio of the metal to magnesium and boron in the alloy is such that the alloy exhibits reversible formation/deformation of BH.sub.4.sup.- anions. The hydrogen storage composition is prepared by combining magnesium, boron and a metal to prepare a ternary alloy and combining the ternary alloy with a metal hydride to form the hydrogen storage composition.

  4. Investigation of Composite Structures

    NASA Technical Reports Server (NTRS)

    Hyer, Michael W.

    2000-01-01

    This final report consists of a compilation of four separate written documents, three dealing with the response and failure of elliptical composite cylinders to an internal pressure load, and the fourth dealing with the influence of manufacturing imperfections in curved composite panels. The three focused on elliptical cylinders consist of the following: 1 - A paper entitled "Progressive Failure Analysis of Internally Pressurized Elliptical Composite Cylinders," 2 - A paper entitled "Influence of Geometric Nonlinearities on the Response and Failure of Internally Pressurized Elliptical Composite Cylinders," and 3 - A report entitled "Response and Failure of Internally Pressurized Elliptical Composite Cyclinders." The document which deals with the influence of manufacturing imperfections is a paper entitled "Manufacturing Distortions of Curved Composite Panels."

  5. Composite Intersection Reinforcement

    NASA Technical Reports Server (NTRS)

    Misciagna, David T. (Inventor); Fuhrer, Jessica J. (Inventor); Funk, Robert S. (Inventor); Tolotta, William S. (Inventor)

    2013-01-01

    An assembly and method for manufacturing a composite reinforcement for unitizing a structure are provided. According to one embodiment, the assembly includes a base having a plurality of pins extending outwardly therefrom to define a structure about which a composite fiber is wound to define a composite reinforcement preform. The assembly also includes a plurality of mandrels positioned adjacent to the base and at least a portion of the composite reinforcement preform, and a cap that is positioned over at least a portion of the plurality of mandrels. The cap is configured to engage each of the mandrels to support the mandrels and the composite reinforcement preform during a curing process to form the composite reinforcement.

  6. Composite intersection reinforcement

    NASA Technical Reports Server (NTRS)

    Misciagna, David T. (Inventor); Fuhrer, Jessica J. (Inventor); Funk, Robert S. (Inventor); Tolotta, William S. (Inventor)

    2010-01-01

    An assembly and method for manufacturing a composite reinforcement for unitizing a structure are provided. According to one embodiment, the assembly includes a base having a plurality of pins extending outwardly therefrom to define a structure about which a composite fiber is wound to define a composite reinforcement preform. The assembly also includes a plurality of mandrels positioned adjacent to the base and at least a portion of the composite reinforcement preform, and a cap that is positioned over at least a portion of the plurality of mandrels. The cap is configured to engage each of the mandrels to support the mandrels and the composite reinforcement preform during a curing process to form the composite reinforcement.

  7. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1981-01-01

    The composite aircraft program component (CAPCOMP) is a graduate level project conducted in parallel with a composite structures program. The composite aircraft program glider (CAPGLIDE) is an undergraduate demonstration project which has as its objectives the design, fabrication, and testing of a foot launched ultralight glider using composite structures. The objective of the computer aided design (COMPAD) portion of the composites project is to provide computer tools for the analysis and design of composite structures. The major thrust of COMPAD is in the finite element area with effort directed at implementing finite element analysis capabilities and developing interactive graphics preprocessing and postprocessing capabilities. The criteria for selecting research projects to be conducted under the innovative and supporting research (INSURE) program are described.

  8. Indirect resin composites

    PubMed Central

    Nandini, Suresh

    2010-01-01

    Aesthetic dentistry continues to evolve through innovations in bonding agents, restorative materials, and conservative preparation techniques. The use of direct composite restoration in posterior teeth is limited to relatively small cavities due to polymerization stresses. Indirect composites offer an esthetic alternative to ceramics for posterior teeth. This review article focuses on the material aspect of the newer generation of composites. This review was based on a PubMed database search which we limited to peer-reviewed articles in English that were published between 1990 and 2010 in dental journals. The key words used were ‘indirect resin composites,’ composite inlays,’ and ‘fiber-reinforced composites.’ PMID:21217945

  9. Integration des sciences et de la langue: Creation et experimentation d'un modele pedagogique pour ameliorer l'apprentissage des sciences en milieu francophone minoritaire

    NASA Astrophysics Data System (ADS)

    Cormier, Marianne

    Les faibles resultats en sciences des eleves du milieu francophone minoritaire, lors d'epreuves au plan national et international, ont interpelle la recherche de solutions. Cette these avait pour but de creer et d'experimenter un modele pedagogique pour l'enseignement des sciences en milieu linguistique minoritaire. En raison de la presence de divers degres de francite chez la clientele scolaire de ce milieu, plusieurs elements langagiers (l'ecriture, la discussion et la lecture) ont ete integres a l'apprentissage scientifique. Nous avions recommande de commencer le processus d'apprentissage avec des elements langagiers plutot informels (redaction dans un journal, discussions en dyades...) pour progresser vers des activites langagieres plus formelles (redaction de rapports ou d'explications scientifiques). En ce qui a trait a l'apprentissage scientifique, le modele preconisait une demarche d'evolution conceptuelle d'inspiration socio-constructiviste tout en s'appuyant fortement sur l'apprentissage experientiel. Lors de l'experimentation du modele, nous voulions savoir si celui-ci provoquait une evolution conceptuelle chez les eleves, et si, simultanement, le vocabulaire scientifique de ces derniers s'enrichissait. Par ailleurs, nous cherchions a comprendre comment les eleves vivaient leurs apprentissages dans le cadre de ce modele pedagogique. Une classe de cinquieme annee de l'ecole de Grande-Digue, dans le Sud-est du Nouveau-Brunswick, a participe a la mise a l'essai du modele en etudiant les marais sales locaux. Lors d'entrevues initiales, nous avons remarque que les connaissances des eleves au sujet des marais sales etaient limitees. En effet, s'ils etaient conscients que les marais etaient des lieux naturels, ils ne pouvaient pas necessairement les decrire avec precision. Nous avons egalement constate que les eleves utilisaient surtout des mots communs (plantes, oiseaux, insectes) pour decrire le marais. Les resultats obtenus indiquent que les eleves ont

  10. Étude de lʼadhérence des joncs et des plats composite avec le béton par flexion ( beam test)

    NASA Astrophysics Data System (ADS)

    Merdas, Abdelghani; Fiorio, Bruno; Chikh, Nasr-Eddine

    The Near Surface Mounted (NSM) technique has been used in recent years for the strengthening of reinforced concrete beams. It involves the insertion of strips or rods of polymers reinforced with carbon fiber (CFRP) in the groove made previously in the concrete cover of corresponding surfaces, filled with epoxy adhesive for fixation. In order to characterize the bond behavior of the laminate and rods to concrete, an experimental work of pullout-bending tests was carried out. The pullout force at the laminate and the slip at the free and loaded end were measured. The influences of the concrete strength, the strength of the bond, and bond length on the bonding behavior between the three materials concrete, epoxy adhesive and CFRP were analyzed.

  11. COMPOSITION, STRUCTURE, ET MODE DE FORMATION DES CONCRÉTIONS MINÉRALES DANS L'INTESTIN MOYEN DES HOMOPTERES CERCOPIDES

    PubMed Central

    Gouranton, Jean

    1968-01-01

    The granules which occur in the cells of a part of the midgut wall in Cercopid larvae and adults (Homoptera) have been studied by biochemical and cytochemical methods and by electron microscopy. The granules have a diameter up to about 2µ and contain calcium, magnesium, iron, carbonates, and phosphates. Protein and acid mucopolysaccharide have also been detected. A chromatographic study shows that uric acid and guanine are not present. The young concretions occur primarily in ergastoplasmic cisternae. They are first wholly electron-opaque, but their center becomes more and more clear. In very old spheres, only a thin shell of electron-opaque material remains. The spheres which have reached about 1µ in diameter are all associated with myelin figures. The granule-containing cells, which nearly occlude the lumen of the midgut in larvae, are eliminated in the very young adults, but the storage excretion still continue in adults. PMID:4231917

  12. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, Robert G.; Wiberley, Stephen E.

    1988-01-01

    A decade long program to develop critical advanced composite technology in the areas of physical properties, structural concept and analysis, manufacturing, reliability, and life predictions is reviewed. Specific goals are discussed. The status of the chemical vapor deposition effects on carbon fiber properties; inelastic deformation of metal matrix laminates; fatigue damage in fibrous MMC laminates; delamination fracture toughness in thermoplastic matrix composites; and numerical analysis of composite micromechanical behavior are presented.

  13. Galactic cosmic ray composition

    NASA Technical Reports Server (NTRS)

    Meyer, J. P.

    1986-01-01

    An assessment is given of the galactic cosmic ray source (GCRS) elemental composition and its correlation with first ionization potential. The isotopic composition of heavy nuclei; spallation cross sections; energy spectra of primary nuclei; electrons; positrons; local galactic reference abundances; comparison of solar energetic particles and solar coronal compositions; the hydrogen; lead; nitrogen; helium; and germanium deficiency problems; and the excess of elements are among the topics covered.

  14. Continuous Fiber Ceramic Composites

    SciTech Connect

    2002-09-01

    Fiber-reinforced ceramic composites demonstrate the high-temperature stability of ceramics--with an increased fracture toughness resulting from the fiber reinforcement of the composite. The material optimization performed under the continuous fiber ceramic composites (CFCC) included a series of systematic optimizations. The overall goals were to define the processing window, to increase the robustinous of the process, to increase process yield while reducing costs, and to define the complexity of parts that could be fabricated.

  15. Composite Material Switches

    NASA Technical Reports Server (NTRS)

    Javadi, Hamid (Inventor)

    2001-01-01

    A device to protect electronic circuitry from high voltage transients is constructed from a relatively thin piece of conductive composite sandwiched between two conductors so that conduction is through the thickness of the composite piece. The device is based on the discovery that conduction through conductive composite materials in this configuration switches to a high resistance mode when exposed to voltages above a threshold voltage.

  16. Cometary dust composition

    NASA Technical Reports Server (NTRS)

    Gehrz, R. D.; Hanner, M. S.

    1988-01-01

    The earth based measurements and in situ sampling of Comet Halley have provided new data about the chemical composition of cometary grains. Recent progress in laboratory studies of interplanetary dust particles (IDPs) complement the comet data, allowing inferences about the mineralogy and physical structure of the comet dust to be drawn from the observed elemental composition and infrared spectra. The in situ dust composition measurements at Halley, the composition of IDPs and their relation to comet dust, and the origin of the 3.4 micron hydrocarbon feature is discussed. Related discussion is also presented on aromatic components in comets and the 3.4 micron feature. These topics are briefly summarized.

  17. Composition for detecting uranyl

    SciTech Connect

    Baylor, L.C.; Stephens, S.M.

    1995-06-13

    A composition for detecting the presence and concentration of a substance, such as uranyl, comprises an organohalide covalently bonded to an indicator for said substance. The composition has at least one active OH site for forming a complex with the substance to be detected. The composition is made by reacting equimolar amounts of the indicator and the organohalide in a polar organic solvent. The absorbance spectrum of the composition-uranyl complex is shifted with respect to the absorbance spectrum of the indicator-uranyl complex, to provide better spectral resolution for detecting uranyl. 6 figs.

  18. Polyimide composites: Application histories

    NASA Technical Reports Server (NTRS)

    Poveromo, L. M.

    1985-01-01

    Advanced composite hardware exposed to thermal environments above 127 C (260 F) must be fabricated from materials having resin matrices whose thermal/moisture resistance is superior to that of conventional epoxy-matrix systems. A family of polyimide resins has evolved in the last 10 years that exhibits the thermal-oxidative stability required for high-temperature technology applications. The weight and structural benefits for organic-matrix composites can now be extended by designers and materials engineers to include structures exposed to 316 F (600 F). Polyimide composite materials are now commercially available that can replace metallic or epoxy composite structures in a wide range of aerospace applications.

  19. Pitch carbon microsphere composite

    NASA Technical Reports Server (NTRS)

    Price, H. L.; Nelson, J. B.

    1977-01-01

    Petroleum pitch carbon microspheres were prepared by flash heating emulsified pitch and carbonizing the resulting microspheres in an inert atmosphere. Microsphere composites were obtained from a mixture of microspheres and tetraester precursor pyrrone powder. Scanning electron micrographs of the composite showed that it was an aggregate of microspheres bonded together by the pyrrone at the sphere contact points, with voids in and among the microspheres. Physical, thermal, and sorption properties of the composite are described. Composite applications could include use as a honeycomb filler in elevated-temperature load-bearing sandwich boards or in patient-treatment tables for radiation treatment of tumors.

  20. Probabilistic composite analysis

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Murthy, P. L. N.

    1991-01-01

    Formal procedures are described which are used to computationally simulate the probabilistic behavior of composite structures. The computational simulation starts with the uncertainties associated with all aspects of a composite structure (constituents, fabrication, assembling, etc.) and encompasses all aspects of composite behavior (micromechanics, macromechanics, combined stress failure, laminate theory, structural response, and tailoring) optimization. Typical cases are included to illustrate the formal procedure for computational simulation. The collective results of the sample cases demonstrate that uncertainties in composite behavior and structural response can be probabilistically quantified.

  1. Electrically conductive cellulose composite

    DOEpatents

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  2. RADIATION SHIELDING COMPOSITION

    DOEpatents

    Dunegan, H.L.

    1963-01-29

    A light weight radiation shielding composition is described whose mechanical and radiological properties can be varied within wide limits. The composition of this shielding material consists of four basic ingredients: powder of either Pb or W, a plastic resin, a resin plasticizer, and a polymerization catalyst to promote an interaction of the plasticizer with the plastic resin. Air may be mixed into the above ingredients in order to control the density of the final composition. For equivalent gamma attenuation, the shielding composition weighs one-third to one-half as much as conventional Pb shielding. (AEC)

  3. Composition for detecting uranyl

    DOEpatents

    Baylor, Lewis C.; Stephens, Susan M.

    1995-01-01

    A composition for detecting the presence and concentration of a substance such as uranyl, comprising an organohalide covalently bonded to an indicator for said substance. The composition has at least one active OH site for forming a complex with the substance to be detected. The composition is made by reacting equimolar amounts of the indicator and the organohalide in a polar organic solvent. The absorbance spectrum of the composition-uranyl complex is shifted with respect to the absorbance spectrum of the indicator-uranyl complex, to provide better spectral resolution for detecting uranyl.

  4. Reactive composite compositions and mat barriers

    DOEpatents

    Langton, Christine A.; Narasimhan, Rajendran; Karraker, David G.

    2001-01-01

    A hazardous material storage area has a reactive multi-layer composite mat which lines an opening into which a reactive backfill and hazardous material are placed. A water-inhibiting cap may cover the hazardous material storage area. The reactive multi-layer composite mat has a backing onto which is placed an active layer which will neutralize or stabilize hazardous waste and a fronting layer so that the active layer is between the fronting and backing layers. The reactive backfill has a reactive agent which can stabilize or neutralize hazardous material and inhibit the movement of the hazardous material through the hazardous material storage area.

  5. Résultats du traitement du synovialosarcome des members

    PubMed Central

    Lukulunga, Loubet Unyendje; Moussa, Abdou Kadri; Mahfoud, Mustapha; El Bardouni, Ahmed; Ismail, Farid; Kharmaz, Mohammed; Berrada, Mohamed Saleh; El Yaacoubi, Moradh

    2014-01-01

    Les synovialosarcomes, sarcomes de haut grade, sont de diagnostic tardif et le traitement est complexe et onéreux, nécessitant la mise en œuvre d'une équipe pluridisciplinaire. Le but de ce travail était d'apprécier les résultats de l'association de la chirurgie à la radio chimiothérapie des synovialosarcomes des membres. Il s'agissait d'une étude rétrospective portant sur des patients présentant de synovialosarcomes des membres pris en charge dans le service de chirurgie orthopédique et traumatologique du CHU Ibn SINA de Rabat allant de Janvier 2006 à Décembre 2011 (6 ans). Nous avons inclus les malades présentant de synovialosarcomes des membres dont la clinique et l'imagerie médicale étaient en faveur, confirmés par l'examen anatomopathologique et la prise en charge effectuée dans le service. Les patients ont été revus avec un recul moyen de 3 ans. Nous n'avons pas retenu les patients dont les dossiers étaient incomplets, perdus de vue. Nous avons apprécié les résultats selon les critères carcinologiques et le score MSTS (Musculoskeletal Tumor Society). La saisie et l'analyse des données ont été faites sur le logiciel SPSS Stastic 17.0 Nous avons colligé 20 cas de synovialosarcome des membres dans le Service de Chirurgie Orthopédique et Traumatologique au CHU Ibn SINA de Rabat Le sexe masculin a prédominé avec 65% (n = 13) avec un sex ratio 1,85. L’âge moyen a été de 42,6 ans avec des extrêmes allant de 20 ans et 70 ans. Notre délai moyen de consultation était de 14,42 mois. Tous les malades ont consulté pour une tuméfaction dans 100% (localisée au membre inférieur dans 65% (n = 13), membre supérieur dans 35% (n = 7). La douleur était associée à la tuméfaction dans 55% (n = 11), quant à l'altération de l’état général et l'ulcération de la masse, elles ont été notées dans 3 cas chacune. Nous avons réalisé un bilan d'imagerie médicale comprenant: radiographie standard, échographie, écho doppler

  6. Caracterisation rheologique des gelees semi-solides des alliages aluminium-silicium renforces

    NASA Astrophysics Data System (ADS)

    Azzi, Lhoucine

    Semi-solid processing is an attractive alternative to replace the traditional methods of forming materials. To be effective, processing in the semi-solid state must be carried out on alloys with a microstructure whose primary phase is globular. Such structures, commonly called semi-solid slurries, are obtained by mixing of the primary phase during solidification. The knowledge of the rheological properties of the semi-solid slurries is of primary importance for process modeling. Various approaches, some of them reviewed in this work, have been proposed to describe such properties. The main goal of our research is to contribute to the better understanding of the mechanisms involved during semi-solid processing of alloys and composites. A close attention is paid to a new class of aluminium based hybrid composites reinforced by graphite and alumina (Al2O3) or silicon-carbide (SiC), known as GrA-NiRTM. The rheological properties of the semi-solid slurries under investigation were evaluated using two simple techniques of viscosimetry. A rotating spindle viscometer was used to assess the viscosity of the slurries in the liquid and the semi-solid state under various conditions of solidification and shearing rates. The spindle geometries were chosen in order to assure a good quality of mixing of the silicon-carbide-graphite suspension. Apparent viscosities were measured in continuous cooling conditions, for isothermal conditions with different shear rates, for isothermal conditions with a linear increase and step changes in shear rates in the semi-solid temperature range. These experiments allowed us to establish the relationships between the viscosity and the solid fraction for different shear rates. The rheological behaviour of partially remelted alloys and composites was also evaluated using a parallel plate viscometer. Specimen with dendritic and globular structures were deformed at different solid fractions and shear rates. The viscosity, at low shear rates, was

  7. Composite materials: Testing and design

    NASA Technical Reports Server (NTRS)

    Whitcomb, John D. (Editor)

    1988-01-01

    The present conference discusses topics in the analysis of composite structures, composite materials' impact and compression behavior, composite materials characterization methods, composite failure mechanisms, NDE methods for composites, and filament-wound and woven composite materials' fabrication. Attention is given to the automated design of a composite plate for damage tolerance, the effects of adhesive layers on composite laminate impact damage, instability-related delamination growth in thermoset and thermoplastic composites, a simple shear fatigue test for unidirectional E-glass epoxy, the growth of elliptic delaminations in laminates under cyclic transverse shear, and the mechanical behavior of braided composite materials.

  8. Les infections à Pseudomonas aeruginosa au service des maladies infectieuses du CHU YO, Burkina Faso: à propos deux cas

    PubMed Central

    Mamoudou, Savadogo; Lassina, Dao; Fla, Koueta

    2015-01-01

    Nous rapportons deux cas d'infection à Pseudomonas aeruginosa: un cas de méningite et un cas d'infection urinaire. Les auteurs rappellent qu’à côté des étiologies classiques des méningites et des infections urinaires, des germes résistants comme Pseudomonas aeruginosa peuvent être responsables d'infections à localisation méningées et urinaires et dont il faut connaître pour une bonne prise en charge. Le traitement de ces infections requiert un antibiogramme au regard de la grande capacité de résistance de Pseudomonas aeruginosa en milieu hospitalier. La limitation des gestes invasifs et l'application rigoureuse des mesures de prévention des infections en milieu hospitalier contribueront à lutter efficacement contre ces infections en milieu de soins. PMID:26491521

  9. A DES ASIC Suitable for Network Encryption at 10 Gbps and Beyond

    SciTech Connect

    Gass, Karl; Pierson, Lyndon G.; Robertson, Perry J.; Wilcox, D. Craig; Witzke, Edward L.

    1999-04-30

    The Sandia National Laboratories (SNL) Data Encryption Standard (DES) Application Specific Integrated Circuit (ASIC) is the fastest known implementation of the DES algorithm as defined in the Federal Information Processing Standards (FIPS) Publication 46-2. DES is used for protecting data by cryptographic means. The SNL DES ASIC, over 10 times faster than other currently available DES chips, is a high-speed, filly pipelined implementation offering encryption, decryption, unique key input, or algorithm bypassing on each clock cycle. Operating beyond 105 MHz on 64 bit words, this device is capable of data throughputs greater than 6.7 Billion bits per second (tester limited). Simulations predict proper operation up to 9.28 Billion bits per second. In low frequency, low data rate applications, the ASIC consumes less that one milliwatt of power. The device has features for passing control signals synchronized to throughput data. Three SNL DES ASICS may be easily cascaded to provide the much greater security of triple-key, triple-DES.

  10. Occurrence of an unknown Atlantic eruption in the Chaîne des Puys volcanic field (Massif Central, France)

    NASA Astrophysics Data System (ADS)

    Jouannic, G.; Walter-Simonnet, A. V.; Bossuet, G.; Cubizolle, H.; Boivin, P.; Devidal, J. L.; Oberlin, C.

    2014-08-01

    A volcanic ash layer, called MF1, was recently identified in Holocene sediments from the Gourgon and Molhiac peat bogs (Monts du Forez, French Massif Central). This ash layer consists of colorless shards with a heterogeneous trachytic to rhyolitic composition. The trace elements analyzed by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) attest to a local origin. Radiocarbon dating of peat samples taken within and below the ash layer indicates the best age at 6339 ± 61 cal yr BP, i.e. an age contemporaneous with the volcanic activity of Montchal, Montcineyre and Pavin volcanoes from the Chaîne des Puys volcanic field. These volcanoes are characterized by basaltic and trachytic products, thus the rhyolitic composition of MF1 tephra suggests that it is likely originated from an unknown eruption. These results again confirm the interest of studying the distal volcanic ash fallouts in order to establish or specify records of past eruptions of volcanic fields. Identification of this new tephra layer also provides an additional tephrochronological marker for Eastern French Massif Central.

  11. Geology, petrography, geochemistry, and genesis of sulfide-rich pods in the Lac des Iles palladium deposits, western Ontario, Canada

    NASA Astrophysics Data System (ADS)

    Duran, Charley J.; Barnes, Sarah-Jane; Corkery, John T.

    2016-04-01

    The Lac des Iles Pd deposits are known for their Pd-rich sulfide-poor mineralization. However, previously undocumented sulfide-rich pods also occur within the intrusion that hosts the deposits. Given the complex magmatic and hydrothermal history of the mineralization at Lac des Iles, the sulfide-rich pods could have crystallized from magmatic sulfide liquids or precipitated from hydrothermal fluids. Sulfide-rich pods occur throughout the stratigraphy, in all rock types, and along comagmatic shear zones, and contain net-textured to massive sulfides. They can be divided into four main groups based on the variation in mineral assemblages: (1) pyrrhotite-pentlandite ± pyrite-chalcopyrite-magnetite-ilmenite; (2) chalcopyrite ± pyrrhotite-pentlandite-pyrite-magnetite-ilmenite; (3) pyrite ± pentlandite-chalcopyrite-pyrrhotite-magnetite-ilmenite; and (4) magnetite ± ilmenite-pyrrhotite-pentlandite-pyrite-chalcopyrite. Whole rock metal contents and S isotopic compositions do not change with the amount of pyrite present, except for slight enrichments in As and Bi. The presence of an essentially magmatic sulfide mineral assemblage (pyrrhotite-pentlandite ± chalcopyrite) with pentlandite exsolution flames in pyrrhotite in some pods suggests that the pods crystallized from magmatic sulfide liquids. The very low Cu contents of the pods suggests that they are mainly cumulates of monosulfide solid solution (MSS). We propose a model whereby sulfide liquids were concentrated into dilation zones prior to crystallizing cumulus MSS. Intermediate solid solution crystallized from the fractionated liquids at the edges of some pods leaving residual liquids enriched in Pt, Pd, Au, As, Bi, Sb, and Te. These residual liquids are no longer associated with the pods. During subsequent alteration, pyrite replaced MSS/pyrrhotite, but this did not affect the platinum-group element contents of the pods.

  12. Levitation of superconducting composites

    NASA Technical Reports Server (NTRS)

    Chiang, C. K.; Turchinskaya, M.; Swartzendruber, L. J.; Shull, R. D.; Bennett, L. H.

    1991-01-01

    The inverse levitation of a high temperature superconductor polymer composite consisting of powdered quench melt growth Ba2YCu3O(7-delta) and cyanoacrylate is reported. Magnetic hysteresis loop measurements for the composite are compared to those measured for the bulk material prior to powdering. Differences in the flux pining capability between the two material forms are small but significant.

  13. Biodegradable synthetic bone composites

    DOEpatents

    Liu, Gao; Zhao, Dacheng; Saiz, Eduardo; Tomsia, Antoni P.

    2013-01-01

    The invention provides for a biodegradable synthetic bone composition comprising a biodegradable hydrogel polymer scaffold comprising a plurality of hydrolytically unstable linkages, and an inorganic component; such as a biodegradable poly(hydroxyethylmethacrylate)/hydroxyapatite (pHEMA/HA) hydrogel composite possessing mineral content approximately that of human bone.

  14. Molybdenum disilicide matrix composite

    DOEpatents

    Petrovic, John J.; Carter, David H.; Gac, Frank D.

    1991-01-01

    A composition consisting of an intermetallic compound, molybdenum disilicide, which is reinforced with VS silicon carbide whiskers dispersed throughout it and a method of making the reinforced composition. Use of the reinforcing material increases fracture toughness at low temperatures and strength at high temperatures, as compared to pure molybdenum disilicide.

  15. Molybdenum disilicide matrix composite

    DOEpatents

    Petrovic, John J.; Carter, David H.; Gac, Frank D.

    1990-01-01

    A composition consisting of an intermetallic compound, molybdenum disilicide, which is reinforced with VS silicon carbide whiskers dispersed throughout it and a method of making the reinforced composition. Use of the reinforcing material increases fracture toughness at low temperatures and strength at high temperatures, as compared to pure molybdenum disilicide.

  16. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Wiberley, S. E.

    1978-01-01

    The purpose of the RPI composites program is to develop advanced technology in the areas of physical properties, structural concepts and analysis, manufacturing, reliability and life prediction. Concommitant goals are to educate engineers to design and use composite materials as normal or conventional materials. A multifaceted program was instituted to achieve these objectives.

  17. The Teaching of Composition.

    ERIC Educational Resources Information Center

    Crowley, Sharon, Ed.

    1976-01-01

    This issue of the "Arizona English Bulletin" includes articles concerned with philosophy, psychology, and procedure in the composition classroom at all levels of instruction. Among the topics considered are contending with critics of composition, the back-to-basics movement, the writing process, writing modules, remedial writing, personalized…

  18. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1982-01-01

    Research in the basic composition, characteristics, and processng science of composite materials and their constituents is balanced against the mechanics, conceptual design, fabrication, and testing of generic structural elements typical of aerospace vehicles so as to encourage the discovery of unusual solutions to problems. Detailed descriptions of the progress achieved in the various component parts of his program are presented.

  19. Elastically tailored composite structures

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Elastically tailored composite structures using out-of-autoclave processes. Several unsymetric autoclave-cured and electron-beam-cured composite laminates are compared. Cantilevered beam (unbalanced/asymetric laminate) used to demonstrate bend-twist coupling effects. Photographed in building 1145, photographic studio.

  20. Probabilistic Fiber Composite Micromechanics

    NASA Technical Reports Server (NTRS)

    Stock, Thomas A.

    1996-01-01

    Probabilistic composite micromechanics methods are developed that simulate expected uncertainties in unidirectional fiber composite properties. These methods are in the form of computational procedures using Monte Carlo simulation. The variables in which uncertainties are accounted for include constituent and void volume ratios, constituent elastic properties and strengths, and fiber misalignment. A graphite/epoxy unidirectional composite (ply) is studied to demonstrate fiber composite material property variations induced by random changes expected at the material micro level. Regression results are presented to show the relative correlation between predictor and response variables in the study. These computational procedures make possible a formal description of anticipated random processes at the intra-ply level, and the related effects of these on composite properties.

  1. Versatile composite amplifier configuration

    NASA Astrophysics Data System (ADS)

    Gift, Stephan J. G.; Maundy, Brent

    2015-06-01

    This paper describes a versatile composite amplifier in which a current feedback amplifier (CFA) drives an operational amplifier (OPA). In the conventional OPA-CFA composite amplifier, an OPA drives a CFA resulting in a composite structure that combines the DC input stability of the OPA and the high speed capability of the CFA. The proposed composite configuration combines different features of the CFA and OPA, specifically the constant bandwidth property of the CFA and the high power and high current output capacity of the OPA. The new circuit is easily implemented in the standard inverting and non-inverting configurations using commercially available devices, and the accuracy and constant bandwidth features were experimentally verified. Local feedback around the associated CFA ensures that the proposed composite amplifier possesses a higher level of bandwidth constancy than a single CFA.

  2. [Advanced Composites Technology Initiatives

    NASA Technical Reports Server (NTRS)

    Julian, Mark R.

    2002-01-01

    This final report closes out the W02 NASA Grant #NCC5-646. The FY02 grant for advanced technology initiatives through the Advanced Composites Technology Institute in Bridgeport, WV, at the Robert C. Byrd Institute (RCBI) Bridgeport Manufacturing Technology Center, is complete; all funding has been expended. RCBI continued to expand access to technology; develop and implement a workforce-training curriculum; improve material development; and provide prototyping and demonstrations of new and advanced composites technologies for West Virginia composites firms. The FY 02 efforts supported workforce development, technical training and the HST development effort of a super-lightweight composite carrier prototype and expanded the existing technical capabilities of the growing aerospace industry across West Virginia to provide additional support for NASA missions. Additionally, the Composites Technology and Training Center was awarded IS0 9001 - 2000 certification and Cleanroom Class 1000 certification during this report period.

  3. Etude experimentale de la photoexcitation des colorants de type anthracene, azobenzene et thioindigo dans des matrices de cristaux liquides nematiques et smectiques

    NASA Astrophysics Data System (ADS)

    Saad, Bendaoud

    Nous avons étudié le comportement de différents colorants (tétracène et azobenzènes AZD3, DR1 et D2) dans des matrices de cristaux liquides (E7 et 5CB). Les résultats obtenus ont montré que la réorientation optique des molécules de cristaux liquides se produit à des intensités extrêmement faibles (~1 μW/cm 2). Nous avons attribué cet effet à l'interaction entre les molécules des colorants photoexcitées et celles des cristaux liquides hôtes. Ces interactions se produisent lorsque les molécules dichroïques exçitées transitent entre des états triplets intermédiaires tout en conduisant à la génération d'un nouveau moment optique géant, responsable de la réorientation des molécules. Le changement de la forme de la molécule du colorant, dû à l'isomérisation Trans-Cis , est à l'origine de la création de ce moment. Ce qui distingue notre réorientation moléculaire de celle obtenue sur d'autres systèmes hôtes-dopants est que les molécules sont repoussées du champ électrique de la lumière. Par ailleurs, cette réorientation est accompagnée d'une diffusion anisotrope des molécules excitées. Nous avons aussi étudié le cristal liquide PhBz rendu ferroélectrique en le dopant par des molécules thioindigos. En exploitant l'augmentation de la polarisation spontanée due à la photoisomérisation du colorant, nous avons pu réaliser un hologramme dynamique contrôlable par un champ optique assisté par une tension statique.

  4. Liquid crystalline composites containing phyllosilicates

    DOEpatents

    Chaiko, David J.

    2004-07-13

    The present invention provides phyllosilicate-polymer compositions which are useful as liquid crystalline composites. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while at the same time be transparent. Because of the ordering of the particles liquid crystalline composite, liquid crystalline composites are particularly useful as barriers to gas transport.

  5. Advanced composites in Japan

    NASA Technical Reports Server (NTRS)

    Diefendorf, R. Judd; Hillig, William G.; Grisaffe, Salvatore J.; Pipes, R. Byron; Perepezko, John H.; Sheehan, James E.

    1994-01-01

    The JTEC Panel on Advanced Composites surveyed the status and future directions of Japanese high-performance ceramic and carbon fibers and their composites in metal, intermetallic, ceramic, and carbon matrices. Because of a strong carbon and fiber industry, Japan is the leader in carbon fiber technology. Japan has initiated an oxidation-resistant carbon/carbon composite program. With its outstanding technical base in carbon technology, Japan should be able to match present technology in the U.S. and introduce lower-cost manufacturing methods. However, the panel did not see any innovative approaches to oxidation protection. Ceramic and especially intermetallic matrix composites were not yet receiving much attention at the time of the panel's visit. There was a high level of monolithic ceramic research and development activity. High temperature monolithic intermetallic research was just starting, but notable products in titanium aluminides had already appeared. Matrixless ceramic composites was one novel approach noted. Technologies for high temperature composites fabrication existed, but large numbers of panels or parts had not been produced. The Japanese have selected aerospace as an important future industry. Because materials are an enabling technology for a strong aerospace industry, Japan initiated an ambitious long-term program to develop high temperature composites. Although just starting, its progress should be closely monitored in the U.S.

  6. Ceramic-silicide composites

    SciTech Connect

    Petrovic, J.J.

    1998-12-01

    The area of ceramic-silicide composites represents a merging of structural ceramics and structural silicides. Such ceramic-silicide composites can possess the desirable characteristics of both classes of compounds. Important structural ceramics are materials such as Si{sub 3}N{sub 4}, SiC, Al{sub 2}O{sub 3}, and ZrO{sub 2}, which possess covalent, ionic, or mixed covalent-ionic atomic bonding. An important structural silicide is MoSi{sub 2}, which possesses mixed covalent-metallic bonding. The arena of ceramic-silicide composites encompasses both composites where the structural silicide is the matrix and the structural ceramic is the reinforcement, and composites where the structural ceramic is the matrix and the structural silicide is the reinforcement. In the former area, MoSi{sub 2}-SiC, MoSi{sub 2}-ZrO{sub 2}, and MoSi{sub 2}-Al{sub 2}O{sub 3} composites are discussed. In the latter area, Si{sub 3}N{sub 4}-MoSi{sub 2} composites are described.

  7. Composite ion exchange materials

    SciTech Connect

    Amarasinghe, S.; Zook, L.; Leddy, J.

    1994-12-31

    Composite ion exchange materials can be formed by sorbing ion exchange polymers on inert, high surface area substrates. In general, the flux of ions and molecules through these composites, as measured electrochemically, increases as the ratio of the surface area of the substrate increases relative to the volume of the ion exchanger. This suggests that fields and gradients established at the interface between the ion exchanger and substrate are important in determining the transport characteristics of the composites. Here, the authors will focus on composites formed with a cation exchange polymer, Nafion, and two different types of microbeads: polystyrene microspheres and polystyrene coated magnetic microbeads. For the polystyrene microbeads, scanning electron micrographs suggest the beads cluster in a self-similar manner, independent of the bead diameter. Flux of Ru(NH3)63+ through the composites was studied as a function of bead fraction, bead radii, and fixed surface area with mixed bead sizes. Flux was well modeled by surface diffusion along a fractal interface. Magnetic composites were formed with columns of magnetic microbeads normal to the electrode surface. Flux of Ru(NH3)63+ through these composites increased exponentially with bead fraction. For electrolyses, the difference in the molar magnetic susceptibility of the products and reactants, Dcm, tends to be non-zero. For seven redox reactions, the ratio of the flux through the magnetic composites to the flux through a Nafion film increases monotonically with {vert_bar}Dcm{vert_bar}, with enhancements as large as thirty-fold. For reversible species, the electrolysis potential through the magnetic composites is 35 mV positive of that for the Nafion films.

  8. Comparison of Two Methods for Composite Score Generation in Dry Eye Syndrome

    PubMed Central

    See, Craig; Bilonick, Richard A.; Feuer, William; Galor, Anat

    2013-01-01

    Purpose. To compare two methods of composite score generation in dry eye syndrome (DES). Methods. Male patients seen in the Miami Veterans Affairs eye clinic with normal eyelid, corneal, and conjunctival anatomy were recruited to participate in the study. Patients filled out the Dry Eye Questionnaire 5 (DEQ5) and underwent measurement of tear film parameters. DES severity scores were generated by independent component analysis (ICA) and latent class analysis (LCA). Results. A total of 247 men were included in the study. Mean age was 69 years (SD 9). Using ICA analysis, osmolarity was found to carry the largest weight, followed by eyelid vascularity and meibomian orifice plugging. Conjunctival injection and tear breakup time (TBUT) carried the lowest weights. Using LCA analysis, TBUT was found to be best at discriminating healthy from diseased eyes, followed closely by Schirmer's test. DEQ5, eyelid vascularity, and conjunctival injection were the poorest at discrimination. The adjusted correlation coefficient between the two generated composite scores was 0.63, indicating that the shared variance was less than 40%. Conclusions. Both ICA and LCA produced composite scores for dry eye severity, with weak to moderate agreement; however, agreement for the relative importance of single diagnostic tests was poor between the two methods. PMID:23942971

  9. Composite Overview and Composite Aerocover Overview

    NASA Technical Reports Server (NTRS)

    Caraccio, Anne; Tate, LaNetra; Dokos, Adam; Taylor, Brian; Brown, Chad

    2014-01-01

    Materials Science Division within the Engineering Directorate tasked by the Ares Launch Vehicle Division (LX-V) and the Fluids Testing and Technology Development Branch (NE-F6) to design, fabricate and test an aerodynamic composite shield for potential Heavy Lift Launch Vehicle infusion and a composite strut that will serve as a pathfinder in evaluating calorimeter data for the CRYOSTAT (cryogenic on orbit storage and transfer) Project. ATP project is to carry the design and development of the aerodynamic composite cover or "bracket" from cradle to grave including materials research, purchasing, design, fabrication, testing, analysis and presentation of the final product. Effort consisted of support from the Materials Testing & Corrosion Control Branch (NE-L2) for mechanical testing, the Prototype Development Branch (NE-L3) for CAD drawing, design/analysis, and fabrication, Materials & Processes Engineering Branch (NE-L4) for project management and materials selection; the Applied Physics Branch (NE-LS) for NDE/NDI support; and the Chemical Analysis Branch (NE-L6) for developmental systems evaluation. Funded by the Ares Launch Vehicle Division and the Fluids Testing and Technology Development Branch will provide ODC

  10. Composite beam builder

    NASA Technical Reports Server (NTRS)

    Poveromo, L. M.; Muench, W. K.; Marx, W.; Lubin, G.

    1981-01-01

    The building block approach to large space structures is discussed, and the progress made in constructing aluminum beams is noted. It is pointed out that composites will also be required in space structures because they provide minimal distortion characteristics during thermal transients. A composite beam builder currently under development is discussed, with attention given to cap forming and the fastening of cross-braces. The various composite materials being considered are listed, along with certain of their properties. The need to develop continuous forming stock up to 300 m long is stressed.

  11. Advanced composites technology program

    NASA Technical Reports Server (NTRS)

    Davis, John G., Jr.

    1993-01-01

    This paper provides a brief overview of the NASA Advanced Composites Technology (ACT) Program. Critical technology issues that must be addressed and solved to develop composite primary structures for transport aircraft are delineated. The program schedule and milestones are included. Work completed in the first 3 years of the program indicates the potential for achieving composite structures that weigh less and are cost effective relative to conventional aluminum structure. Selected technical accomplishments are noted. Readers who are seeking more in-depth technical information should study the other papers included in these proceedings.

  12. Composite Structural Materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberly, S. E.

    1984-01-01

    The development and application of filamentary composite materials, is considered. Such interest is based on the possibility of using relatively brittle materials with high modulus, high strength, but low density in composites with good durability and high tolerance to damage. Fiber reinforced composite materials of this kind offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been made since the initial developments in the mid 1960's. There were only limited applied to the primary structure of operational vehicles, mainly as aircrafts.

  13. Hybrid matrix fiber composites

    DOEpatents

    Deteresa, Steven J.; Lyon, Richard E.; Groves, Scott E.

    2003-07-15

    Hybrid matrix fiber composites having enhanced compressive performance as well as enhanced stiffness, toughness and durability suitable for compression-critical applications. The methods for producing the fiber composites using matrix hybridization. The hybrid matrix fiber composites include two chemically or physically bonded matrix materials, whereas the first matrix materials are used to impregnate multi-filament fibers formed into ribbons and the second matrix material is placed around and between the fiber ribbons that are impregnated with the first matrix material and both matrix materials are cured and solidified.

  14. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, R.; Wiberley, S. E.

    1986-01-01

    Overall emphasis is on basic long-term research in the following categories: constituent materials, composite materials, generic structural elements, processing science technology; and maintaining long-term structural integrity. Research in basic composition, characteristics, and processing science of composite materials and their constituents is balanced against the mechanics, conceptual design, fabrication, and testing of generic structural elements typical of aerospace vehicles so as to encourage the discovery of unusual solutions to present and future problems. Detailed descriptions of the progress achieved in the various component parts of this comprehensive program are presented.

  15. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1983-01-01

    Progress and plans are reported for investigations of: (1) the mechanical properties of high performance carbon fibers; (2) fatigue in composite materials; (3) moisture and temperature effects on the mechanical properties of graphite-epoxy laminates; (4) the theory of inhomogeneous swelling in epoxy resin; (5) numerical studies of the micromechanics of composite fracture; (6) free edge failures of composite laminates; (7) analysis of unbalanced laminates; (8) compact lug design; (9) quantification of Saint-Venant's principles for a general prismatic member; (10) variation of resin properties through the thickness of cured samples; and (11) the wing fuselage ensemble of the RP-1 and RP-2 sailplanes.

  16. Electrically conductive composite material

    DOEpatents

    Clough, Roger L.; Sylwester, Alan P.

    1989-01-01

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistant pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like.

  17. Composite Group Technology development

    NASA Astrophysics Data System (ADS)

    Dehoff, Kevin

    A comprehensive classification methodology for graphite composite assemblies was developed at Boeing Helicopters. This classification scheme was used to create a Group Technology (GT) database containing part features and attributes which capture both product and process definition. GT data is available to both Engineering and Operations personnel for retrieval and analysis. This paper will address the applications of group technology at Boeing Helicopters. In particular, the role of GT in Aircraft Design Build (concurrent engineering) processes will be highlighted. Examples of design standardization efforts for composite airframe structural parts will be discussed. In addition, the group technology foundation for cellular manufacturing and a methodology for planning future composite manufacturing facilities will be presented.

  18. Flexible composite radiation detector

    DOEpatents

    Cooke, D. Wayne; Bennett, Bryan L.; Muenchausen, Ross E.; Wrobleski, Debra A.; Orler, Edward B.

    2006-12-05

    A flexible composite scintillator was prepared by mixing fast, bright, dense rare-earth doped powdered oxyorthosilicate (such as LSO:Ce, LSO:Sm, and GSO:Ce) scintillator with a polymer binder. The binder is transparent to the scintillator emission. The composite is seamless and can be made large and in a wide variety of shapes. Importantly, the composite can be tailored to emit light in a spectral region that matches the optimum response of photomultipliers (about 400 nanometers) or photodiodes (about 600 nanometers), which maximizes the overall detector efficiency.

  19. Composite foam structures

    NASA Technical Reports Server (NTRS)

    Williams, Brian E. (Inventor); Brockmeyer, Jerry (Inventor); Tuffias, Robert H. (Inventor)

    2005-01-01

    A composite rigid foam structure that has a skin or coating on at least one of its surfaces. The skin is formed in situ by thermal spray techniques. The skin is bonded substantially throughout the surface of the porous substrate to the peripheries of the pores. The skin on the average does not penetrate the surface of the substrate by more than the depth of about 2 to 5 pores. Thus, thermal spraying the skin onto the rigid foam produces a composite that is tightly and uniformly bonded together without unduly increasing the weight of the composite structure. Both thermal conductivity and bonding are excellent.

  20. Hard metal composition

    DOEpatents

    Sheinberg, Haskell

    1986-01-01

    A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 weight percent boron carbide and the remainder a metal mixture comprising from 70 to 90 percent tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 to 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

  1. Hard metal composition

    DOEpatents

    Sheinberg, H.

    1983-07-26

    A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 wt % boron carbide and the remainder a metal mixture comprising from 70 to 90% tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 and 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

  2. Composite metal membrane

    DOEpatents

    Peachey, Nathaniel M.; Dye, Robert C.; Snow, Ronny C.; Birdsell, Stephan A.

    1998-01-01

    A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

  3. Composite metal membrane

    DOEpatents

    Peachey, N.M.; Dye, R.C.; Snow, R.C.; Birdsell, S.A.

    1998-04-14

    A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

  4. Nanocellulose electroconductive composites

    NASA Astrophysics Data System (ADS)

    Shi, Zhijun; Phillips, Glyn O.; Yang, Guang

    2013-03-01

    Cellulose-based electroconductive composites can be prepared by combining conducting electroactive materials with hydrophilic biocompatible cellulose. Inorganic nanoparticles, such as metal ions and oxides, carbon nanotubes, graphene and graphene oxide, conducting polymers, and ionic liquids (through doping, blending or coating) can be introduced into the cellulose matrix. Such composites can form a biocompatible interface for microelectronic devices, and provide a biocompatible matrix or scaffold for electrically stimulated drug release devices, implantable biosensors, and neuronal prostheses. Here the benefits of combining conventional and bacterial cellulose with these electroactive composites are described and future applications are considered.

  5. Electrically conductive composite material

    DOEpatents

    Clough, R.L.; Sylwester, A.P.

    1988-06-20

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  6. Molecular evolution of peste des petits ruminants virus.

    PubMed

    Muniraju, Murali; Munir, Muhammad; Parthiban, AravindhBabu R; Banyard, Ashley C; Bao, Jingyue; Wang, Zhiliang; Ayebazibwe, Chrisostom; Ayelet, Gelagay; El Harrak, Mehdi; Mahapatra, Mana; Libeau, Geneviève; Batten, Carrie; Parida, Satya

    2014-12-01

    Despite safe and efficacious vaccines against peste des petits ruminants virus (PPRV), this virus has emerged as the cause of a highly contagious disease with serious economic consequences for small ruminant agriculture across Asia, the Middle East, and Africa. We used complete and partial genome sequences of all 4 lineages of the virus to investigate evolutionary and epidemiologic dynamics of PPRV. A Bayesian phylogenetic analysis of all PPRV lineages mapped the time to most recent common ancestor and initial divergence of PPRV to a lineage III isolate at the beginning of 20th century. A phylogeographic approach estimated the probability for root location of an ancestral PPRV and individual lineages as being Nigeria for PPRV, Senegal for lineage I, Nigeria/Ghana for lineage II, Sudan for lineage III, and India for lineage IV. Substitution rates are critical parameters for understanding virus evolution because restrictions in genetic variation can lead to lower adaptability and pathogenicity. PMID:25418782

  7. Use of DES Modeling for Determining Launch Availability for SLS

    NASA Technical Reports Server (NTRS)

    Watson, Michael; Staton, Eric; Cates, Grant; Finn, Ronald; Altino, Karen M.; Burns, K. Lee

    2014-01-01

    (1) NASA is developing a new heavy lift launch system for human and scientific exploration beyond Earth orbit comprising of the Space Launch System (SLS), Orion Multi-Purpose Crew Vehicle (MPCV), and Ground Systems Development and Operations (GSDO); (2) The desire of the system is to ensure a high confidence of successfully launching the exploration missions, especially those that require multiple launches, have a narrow Earth departure window, and high investment costs; and (3) This presentation discusses the process used by a Cross-Program team to develop the Exploration Systems Development (ESD) Launch Availability (LA) Technical Performance Measure (TPM) and allocate it to each of the Programs through the use of Discrete Event Simulations (DES).

  8. Commande optimale à flux libre des machines asynchrones

    NASA Astrophysics Data System (ADS)

    Biedinger, J. M.; Poullain, S.; Yvon, J. P.

    1992-01-01

    The subject of this paper is the optimal control with unconstrained flux of an induction motor being considered as a distributed parameter system described by a nonlinear diffusion equation. This approach allows to describe the electrodynamic state of the motor by taking into account, in a natural way, the influence of saturation and eddy-currents, as well as the nonlinearities due to the variable flux operation. Equations are approximated via a finite element formulation which leads to a finite dimensional dynamical system to which the techniques of optimal control may be applied. The generality of the methodology allows to treat various criteria. The objective aimed in this paper is to force the motor torque to follow a given input, especially under initially demagnetized conditions and with, naturally, constraints on the currents. For this purpose the criterion will be chosen as a norm of the difference between the electromagnetic torque and a given reference torque. Numerical simulations are presented for the case of a squirrel-cage rotor and for a solid iron rotor. Results are compared with those deduced from strategies based on lumped-parameter models. Torque responses obtained with field-oriented control method adapted to the case of flux-variable operation are also presented. Finally a modification of the criterion is proposed for identifying the command which allows to obtain the larger torque during transient states. Dans cet article on traite le problème du contrôle optimal à flux libre d'un moteur asynchrone considéré comme un système à paramètres répartis gouverné par une équation de diffusion non linéaire. Cette approche permet de décrire l'état électrodynamique de la machine en prenant naturellement en compte les effets de la saturation et des courants induits, ainsi que les non-linéarités liées au fonctionnement à flux variable. La formulation éléments finis est utilisée pour traduire le problème continu sous la forme d

  9. Experimental Results in DIS, SIDIS and DES from Jefferson Lab

    SciTech Connect

    Kuhn, Sebastian E.

    2011-07-15

    Jefferson Lab's electron accelerator in its present incarnation, with a maximum beam energy slightly above 6 GeV, has already enabled a large number of experiments expanding our knowledge of nucleon and nuclear structure (especially in Deep Inelastic Scattering--DIS--at moderately high x, and in the resonance region). Several pioneering experiments have yielded first results on Deeply Virtual Compton Scattering (DVCS) and other Deep Exclusive Processes (DES), and the exploration of the rich landscape of transverse momentum-dependent (TMD) structure functions using Semi-Inclusive electron scattering (SIDIS) has begun. With the upgrade of CEBAF to 12 GeV now underway, a significantly larger kinematic space will become available. The 12 GeV program taking shape will complete a detailed mapping of inclusive, TMD and generalized distribution functions for quarks, antiquarks and gluons in the valence region and beyond.

  10. Experimental Results in DIS, SIDIS and DES from Jefferson Lab

    SciTech Connect

    Sebastian Kuhn

    2011-07-01

    Jefferson Lab's electron accelerator in its present incarnation, with a maximum beam energy slightly above 6 GeV, has already enabled a large number of experiments expanding our knowledge of nucleon and nuclear structure (especially in Deep Inelastic Scattering—DIS—at moderately high x, and in the resonance region). Several pioneering experiments have yielded first results on Deeply Virtual Compton Scattering (DVCS) and other Deep Exclusive Processes (DES), and the exploration of the rich landscape of transverse momentum-dependent (TMD) structure functions using Semi-Inclusive electron scattering (SIDIS) has begun. With the upgrade of CEBAF to 12 GeV now underway, a significantly larger kinematic space will become available. The 12 GeV program taking shape will complete a detailed mapping of inclusive, TMD and generalized distribution functions for quarks, antiquarks and gluons in the valence region and beyond.

  11. Statistique des photons d'un laser à 4 niveaux soumis à un pompage optique

    NASA Astrophysics Data System (ADS)

    Chusseau, L.; Arnaud, J.; Philippe, F.

    2002-06-01

    Les lasers conventionnels à 4 niveaux peuvent délivrer de la lumière de statistique sous-Poissonienne même lorsqu'ils sont soumis à un pompage optique. Nous retrouvons exactement ces prédictions de l'optique quantique en supposant simplement que les atomes ont des niveaux d'énergie quantifiés interagissant avec un champ électromagnétique classique, la source du bruit optique étant les sauts quantiques entre niveaux. Des formules analytiques sont obtenues pour les deux paramètres clefs de la statistique des photons du laser: le facteur de Fano et la densité spectrale des photons émis.

  12. Soins primaires des personnes victimes d’une lésion médullaire

    PubMed Central

    McColl, Mary Ann; Aiken, Alice; McColl, Alexander; Sakakibara, Brodie; Smith, Karen

    2012-01-01

    Résumé Objectif Effectuer une étude de la portée des données empiriques, entre 1980 et 2009, concernant les soins primaires aux adultes victimes d’une lésion médullaire (LME). Sources des données Une recension dans des revues révisées par des pairs de1980 à 2009 à l’aide de CINAHL, PubMed-MEDLINE, EMBASE, PsycINFO, Social Sciences Abstracts et Social Work Abstracts. Sélection des études La recherche électronique au moyen de mots-clés a permis de cerner 42 articles sur les soins primaires et les LME. Des critères d’inclusion ont servi à réduire la liste à un ensemble de 21 articles publiés en anglais qui portaient sur un échantillon de plus de 3 et présentaient une analyse empirique. Synthèse Environ 90 % des personnes atteintes d’une LME ont identifié leur médecin de famille comme étant leur docteur habituel; 63 % avaient un spécialiste des LME. Les personnes vivant à long terme avec une LME développent des rubriques complexes pour naviguer dans leurs systèmes de soins de santé personnels. Les données scientifiques ne sont pas unanimes quant à l’efficacité des programmes d’intervention directe pour le maintien de la santé et la prévention des complications à la suite d’une LME. Les données appuient cependant le suivi périodique par une équipe spécialisée et un bilan de santé annuel complet. La recherche fait valoir un fort degré d’uniformité dans l’identification des problèmes les plus courants soulevés par les personnes atteintes d’une LME en soins primaires, dont la plupart concernent l’incapacité, plus précisément les complications secondaires, comme la dysfonction intestinale ou vésicale et la douleur. Il existe aussi de bonnes données probantes à l’effet que de nombreux problèmes de santé généraux exigent de l’attention dans une telle population, comme les problèmes de la densité osseuse, la dépression et les questions entourant la santé sexuelle et la reproduction. Il y a

  13. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  14. Der Physik-Nobelpreis vor 100 Jahren Die Entdeckung des trägen Gases

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2004-11-01

    Im Jahr 1904 erhielt der britische Physiker Lord Rayleigh (John William Strutt, 1842 bis 1919) den Nobelpreis für seine Untersuchungen über die Dichte von Gasen und die Entdeckung des Edelgases Argon.

  15. “Acceptation” et tolérance des allogreffes : nouveau concept

    PubMed Central

    STARZL, Thomas E.

    2010-01-01

    RÉSUMÉ La découverte du microchimérisme dans la transplantation de rein et de foie a permis de mieux comprendre « l’acceptation » des allogreffes, l’analyse des problèmes de conditionnement et la recherche de nouvelles orientations dans le traitement des greffes. En fonction de ce nouveau concept, seront ici discutées les relations avec les maladies infectieuses provoquées par des micro-organismes non cytopathologiques, les réponses aux questions autrefois posées, la réaction immunologique et les implications dans le domaine de l’immunologie générale. PMID:9622934

  16. ACEE composite structures technology

    NASA Technical Reports Server (NTRS)

    James, A. M.

    1984-01-01

    Topics addressed include: strength and hygrothermal response of L-1011 fin components; wing fuel containment and damage tolerance development; impact dynamics; acoustic transmission; fuselage structure; composite transport wing technology development; spar/assembly concepts.

  17. Composites at KSC

    NASA Technical Reports Server (NTRS)

    Cox, Sarah

    2015-01-01

    This is a short presentation on the Composites work that has recently been performed in the Materials Science Divisionat Kennedy Space Center. Topics include Residual Stress, Repair, and Plant Habitat Growth Chamber Fabrication.

  18. Composites Damage Tolerance Workshop

    NASA Technical Reports Server (NTRS)

    Gregg, Wayne

    2006-01-01

    The Composite Damage Tolerance Workshop included participants from NASA, academia, and private industry. The objectives of the workshop were to begin dialogue in order to establish a working group within the Agency, create awareness of damage tolerance requirements for Constellation, and discuss potential composite hardware for the Crew Launch Vehicle (CLV) Upper Stage (US) and Crew Module. It was proposed that a composites damage tolerance working group be created that acts within the framework of the existing NASA Fracture Control Methodology Panel. The working group charter would be to identify damage tolerance gaps and obstacles for implementation of composite structures into manned space flight systems and to develop strategies and recommendations to overcome these obstacles.

  19. Sintered composite filter

    DOEpatents

    Bergman, W.

    1986-05-02

    A particulate filter medium formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers is described. Preferred composition is about 40 vol.% quartz and about 60 vol.% stainless steel fibers. The media is sintered at about 1100/sup 0/C to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550/sup 0/C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  20. Composite zeolite membranes

    DOEpatents

    Nenoff, Tina M.; Thoma, Steven G.; Ashley, Carol S.; Reed, Scott T.

    2002-01-01

    A new class of composite zeolite membranes and synthesis techniques therefor has been invented. These membranes are essentially defect-free, and exhibit large levels of transmembrane flux and of chemical and isotopic selectivity.

  1. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

    1982-01-01

    The promise of filamentary composite materials, whose development may be considered as entering its second generation, continues to generate intense interest and applications activity. Fiber reinforced composite materials offer substantially improved performance and potentially lower costs for aerospace hardware. Much progress has been achieved since the initial developments in the mid 1960's. Rather limited applications to primary aircraft structure have been made, however, mainly in a material-substitution mode on military aircraft, except for a few experiments currently underway on large passenger airplanes in commercial operation. To fulfill the promise of composite materials completely requires a strong technology base. NASA and AFOSR recognize the present state of the art to be such that to fully exploit composites in sophisticated aerospace structures, the technology base must be improved. This, in turn, calls for expanding fundamental knowledge and the means by which it can be successfully applied in design and manufacture.

  2. Probabilistic Approaches: Composite Design

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1997-01-01

    Probabilistic composite design is described in terms of a computational simulation. This simulation tracks probabilistically the composite design evolution from constituent materials, fabrication process through composite mechanics, and structural component. Comparisons with experimental data are provided to illustrate selection of probabilistic design allowables, test methods/specimen guidelines, and identification of in situ versus pristine strength. For example, results show that: in situ fiber tensile strength is 90 percent of its pristine strength; flat-wise long-tapered specimens are most suitable for setting ply tensile strength allowables; a composite radome can be designed with a reliability of 0.999999; and laminate fatigue exhibits wide spread scatter at 90 percent cyclic-stress to static-strength ratios.

  3. Advances in Composites Technology

    NASA Technical Reports Server (NTRS)

    Tenney, D. R.; Dexter, H. B.

    1985-01-01

    A significant level of research is currently focused on the development of tough resins and high strain fibers in an effort to gain improved damage tolerance. Moderate success has been achieved with the development of new resins such as PEEK and additional improvements look promising with new thermoplastic resins. Development of innovative material forms such as 2-D and 3-D woven fabrics and braided structural subelements is also expected to improve damage tolerance and durability of composite hardware. The new thrust in composites is to develop low cost manufacturing and design concepts to lower the cost of composite hardware. Processes being examined include automated material placement, filament winding, pultrusion, and thermoforming. The factory of the future will likely incorporate extensive automation in all aspects of manufacturing composite components.

  4. Entropy and Composition.

    ERIC Educational Resources Information Center

    Freund, John

    1980-01-01

    Demonstrates that the second law of thermodynamics imposes a fundamental constraint upon the process of composition; examines the consequences of this constraint for writers and teachers of writing. (DD)

  5. Layered Composite Analysis Capability

    NASA Technical Reports Server (NTRS)

    Narayanaswami, R.; Cole, J. G.

    1985-01-01

    Laminated composite material construction is gaining popularity within industry as an attractive alternative to metallic designs where high strength at reduced weights is of prime consideration. This has necessitated the development of an effective analysis capability for the static, dynamic and buckling analyses of structural components constructed of layered composites. Theoretical and user aspects of layered composite analysis and its incorporation into CSA/NASTRAN are discussed. The availability of stress and strain based failure criteria is described which aids the user in reviewing the voluminous output normally produced in such analyses. Simple strategies to obtain minimum weight designs of composite structures are discussed. Several example problems are presented to demonstrate the accuracy and user convenient features of the capability.

  6. Composite flexible blanket insulation

    NASA Technical Reports Server (NTRS)

    Kourtides, Demetrius A. (Inventor); Lowe, David M. (Inventor)

    1994-01-01

    An improved composite flexible blanket insulation is presented comprising top silicon carbide having an interlock design, wherein the reflective shield is composed of single or double aluminized polyimide and wherein the polyimide film has a honeycomb pattern.

  7. Composition for detecting uranyl

    DOEpatents

    Baylor, L.C.; Stephens, S.M.

    1994-01-01

    The present invention relates to an indicator composition for use in spectrophotometric detection of a substance in a solution, and a method for making the composition. Useful indicators are sensitive to the particular substance being measured, but are unaffected by the fluid and other chemical species that may be present in the fluid. Optical indicators are used to measure the uranium concentration of process solutions in facilities for extracting uranium from ores, production of nuclear fuels, and reprocessing of irradiated fuels. The composition comprises an organohalide covalently bonded to an indicator for the substance, in such a manner that the product is itself an indicator that provides increased spectral resolution for detecting the substance. The indicator is preferably arsenazo III and the organohalide is preferably cyanuric chloride. These form a composition that is ideally suited for detecting uranyl.

  8. Probabilistic Composite Design

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1997-01-01

    Probabilistic composite design is described in terms of a computational simulation. This simulation tracks probabilistically the composite design evolution from constituent materials, fabrication process, through composite mechanics and structural components. Comparisons with experimental data are provided to illustrate selection of probabilistic design allowables, test methods/specimen guidelines, and identification of in situ versus pristine strength, For example, results show that: in situ fiber tensile strength is 90% of its pristine strength; flat-wise long-tapered specimens are most suitable for setting ply tensile strength allowables: a composite radome can be designed with a reliability of 0.999999; and laminate fatigue exhibits wide-spread scatter at 90% cyclic-stress to static-strength ratios.

  9. Durability of composites

    NASA Technical Reports Server (NTRS)

    Hiel, Clem C.; Adamson, Michael J.

    1987-01-01

    Fiber reinforced materials (composites) are considered very seriously for use in primary loadbearing structures. However, the pace at which they will actually be introduced into the structural designs of the future very much depends on the solution of a critical problem, which is the inability to predict the long term behavior of the material in a given service environment. The research and development of integrity evaluation and lifetime prediction schemes for composite materials is thus a burning issue. The information presented is part of an ongoing program which is directed toward and accelerated determination of the endurance limits of composite materials. Real-time testing is simply not feasible because enough integrity has to be designed into composite structures such that they have a service life which is often as long as twenty or thirty years.

  10. NEUTRONIC REACTOR FUEL COMPOSITION

    DOEpatents

    Thurber, W.C.

    1961-01-10

    Uranium-aluminum alloys in which boron is homogeneously dispersed by adding it as a nickel boride are described. These compositions have particular utility as fuels for neutronic reactors, boron being present as a burnable poison.

  11. Explorer : des clés pour mieux comprendre la matière

    SciTech Connect

    2011-02-14

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  12. Alcohol based-deep eutectic solvent (DES) as an alternative green additive to increase rotenone yield

    SciTech Connect

    Othman, Zetty Shafiqa; Hassan, Nur Hasyareeda; Zubairi, Saiful Irwan

    2015-09-25

    Deep eutectic solvents (DESs) are basically molten salts that interact by forming hydrogen bonds between two added components at a ratio where eutectic point reaches a melting point lower than that of each individual component. Their remarkable physicochemical properties (similar to ionic liquids) with remarkable green properties, low cost and easy handling make them a growing interest in many fields of research. Therefore, the objective of pursuing this study is to analyze the potential of alcohol-based DES as an extraction medium for rotenone extraction from Derris elliptica roots. DES was prepared by a combination of choline chloride, ChCl and 1, 4-butanediol at a ratio of 1/5. The structure of elucidation of DES was analyzed using FTIR, {sup 1}H-NMR and {sup 13}C-NMR. Normal soaking extraction (NSE) method was carried out for 14 hours using seven different types of solvent systems of (1) acetone; (2) methanol; (3) acetonitrile; (4) DES; (5) DES + methanol; (6) DES + acetonitrile; and (7) [BMIM] OTf + acetone. Next, the yield of rotenone, % (w/w), and its concentration (mg/ml) in dried roots were quantitatively determined by means of RP-HPLC. The results showed that a binary solvent system of [BMIM] OTf + acetone and DES + acetonitrile was the best solvent system combination as compared to other solvent systems. It contributed to the highest rotenone content of 0.84 ± 0.05% (w/w) (1.09 ± 0.06 mg/ml) and 0.84 ± 0.02% (w/w) (1.03 ± 0.01 mg/ml) after 14 hours of exhaustive extraction time. In conclusion, a combination of the DES with a selective organic solvent has been proven to have a similar potential and efficiency as of ILs in extracting bioactive constituents in the phytochemical extraction process.

  13. Explorer : des clés pour mieux comprendre la matière

    ScienceCinema

    None

    2011-10-06

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  14. Alcohol based-deep eutectic solvent (DES) as an alternative green additive to increase rotenone yield

    NASA Astrophysics Data System (ADS)

    Othman, Zetty Shafiqa; Hassan, Nur Hasyareeda; Zubairi, Saiful Irwan

    2015-09-01

    Deep eutectic solvents (DESs) are basically molten salts that interact by forming hydrogen bonds between two added components at a ratio where eutectic point reaches a melting point lower than that of each individual component. Their remarkable physicochemical properties (similar to ionic liquids) with remarkable green properties, low cost and easy handling make them a growing interest in many fields of research. Therefore, the objective of pursuing this study is to analyze the potential of alcohol-based DES as an extraction medium for rotenone extraction from Derris elliptica roots. DES was prepared by a combination of choline chloride, ChCl and 1, 4-butanediol at a ratio of 1/5. The structure of elucidation of DES was analyzed using FTIR, 1H-NMR and 13C-NMR. Normal soaking extraction (NSE) method was carried out for 14 hours using seven different types of solvent systems of (1) acetone; (2) methanol; (3) acetonitrile; (4) DES; (5) DES + methanol; (6) DES + acetonitrile; and (7) [BMIM] OTf + acetone. Next, the yield of rotenone, % (w/w), and its concentration (mg/ml) in dried roots were quantitatively determined by means of RP-HPLC. The results showed that a binary solvent system of [BMIM] OTf + acetone and DES + acetonitrile was the best solvent system combination as compared to other solvent systems. It contributed to the highest rotenone content of 0.84 ± 0.05% (w/w) (1.09 ± 0.06 mg/ml) and 0.84 ± 0.02% (w/w) (1.03 ± 0.01 mg/ml) after 14 hours of exhaustive extraction time. In conclusion, a combination of the DES with a selective organic solvent has been proven to have a similar potential and efficiency as of ILs in extracting bioactive constituents in the phytochemical extraction process.

  15. Application de l’analyse des séries chronologiques à la projection d’effectifs de population scolaire par la méthode des composantes

    PubMed Central

    Smith, Herbert L.

    2016-01-01

    Cet article veut montrer qu’on peut réécrire des modèles démographiques en vue de réaliser des projections par cohorte, en les transposant dans un modèle économétrique vecteur autoré-gressif (VAR). De cette façon, la méthode des composantes se dote d’un cadre stochastique qui étend son envergure. Le potentiel de cette perspective est illustré à travers l’exemple d’une projection d’effectifs de population scolaire. Il met en valeur une série d’équations qui permet de vérifier la validité de plusieurs choix de modélisations habituellement utilisées dans le domaine de la prévision. PMID:27346921

  16. Multifracture of ceramic composites

    SciTech Connect

    Weitsman, Y.J.; Zhu, H.

    1992-03-01

    This work presents a mechanistic model for the multifracture process of uniaxially reinforced fibrous ceramic composites under monotonically increasing tension parallel to the fiber direction. The model employs an energy criterion to account for the progression of matrix cracks, bridged by intact fibers, and Weibull failure statistics to relate the failure of the fibers. Consideration is given to the interactions between the foregoing failure processes as well as to the effects of various material parameters on the response of the composite.

  17. Composite desiccant structure

    DOEpatents

    Fraioli, Anthony V.; Schertz, William W.

    1987-01-01

    A composite formed of small desiccant particles retained in a dark matrix composed of a porous binder containing a transition metal oxide with pores to provide moisture transport with respect to the particles, and metallic fibers to remove the heat of condensation during dehumidification and provide heat for the removal of moisture during regeneration. The moisture absorbing properties of the composite may be regenerated by exposure of the dark matrix to solar radiation with dehumidification occurring at night.

  18. Boron nitride composites

    DOEpatents

    Kuntz, Joshua D.; Ellsworth, German F.; Swenson, Fritz J.; Allen, Patrick G.

    2016-02-16

    According to one embodiment, a composite product includes hexagonal boron nitride (hBN), and a plurality of cubic boron nitride (cBN) particles, wherein the plurality of cBN particles are dispersed in a matrix of the hBN. According to another embodiment, a composite product includes a plurality of cBN particles, and one or more borate-containing binders.

  19. Repairs of composite structures

    NASA Astrophysics Data System (ADS)

    Roh, Hee Seok

    Repair on damaged composite panels was conducted. To better understand adhesively bonded repair, the study investigates the effect of design parameters on the joint strength. The design parameters include bondline length, thickness of adherend and type of adhesive. Adhesives considered in this study were tested to measure their tensile material properties. Three types of adhesively bonded joints, single strap, double strap, and single lap joint were considered under changing bondline lengths, thickness of adherend and type of adhesive. Based on lessons learned from bonded joints, a one-sided patch repair method for composite structures was conducted. The composite patch was bonded to the damaged panel by either film adhesive FM-73M or paste adhesive EA-9394 and the residual strengths of the repaired specimens were compared under varying patch sizes. A new repair method using attachments has been suggested to enhance the residual strength. Results obtained through experiments were analyzed using finite element analysis to provide a better repair design and explain the experimental results. It was observed that the residual strength of the repaired specimen was affected by patch length. Method for rapid repairs of damaged composite structures was investigated. The damage was represented by a circular hole in a composite laminated plate. Pre-cured composite patches were bonded with a quick-curing commercial adhesive near (rather than over) the hole. Tensile tests were conducted on specimens repaired with various patch geometries. The test results showed that, among the methods investigated, the best repair method restored over 90% of the original strength of an undamaged panel. The interfacial stresses in the adhesive zone for different patches were calculated in order to understand the efficiencies of the designs of these patch repairs. It was found that the composite patch that yielded the best strength had the lowest interfacial peel stress between the patch and

  20. Composite desiccant structure

    DOEpatents

    Fraioli, A.V.; Schertz, W.W.

    1984-06-06

    This patent discloses a composite formed of small desiccant particles retained in a dark matrix composed of a porous binder containing a transition metal oxide with pores to provide moisture transport with respect to the particles, and metallic fibers to remove the heat of condensation during dehumidification and provide heat for the removal of moisture during regeneration. The moisture absorbing properties of the composite may be regenerated by exposure of the dark matrix to solar radiation with dehumidification occurring at night.

  1. Agouti polypeptide compositions

    DOEpatents

    Woychik, Richard P.; Bultman, Scott J.; Michaud, Edward J.

    2001-10-30

    Disclosed are methods and compositions comprising novel agouti polypeptides and the polynucleotides which encode them. Also disclosed are DNA segments encoding these proteins derived from human and murine cell lines, and the use of these polynucleotides and polypeptides in a variety of diagnostic and therapeutic applications. Methods, compositions, kits, and devices are also provided for identifying compounds which are inhibitors of agouti activity, and for altering fatty acid synthetase activity and intracellular calcium levels in transformed cells.

  2. Composite Tank Development

    NASA Technical Reports Server (NTRS)

    DeLay, Thomas K.

    2000-01-01

    This paper presents viewgraphs on composite tank development. There is a need for oxidizer tanks and reliable, lightweight fuel. The need for cost-effective and scalable manufacturing is also evident. In order to achieve these goals, tooling methods for tank development must be applied, methods for producing easily adaptable and scalable vessel liners must be developed, insulation layer or protective barriers for containers must be manufactured, and an appropriate fiber/resin system for composite overwrap structures must be identified.

  3. Composite weak bosons

    SciTech Connect

    Suzuki, M.

    1988-04-01

    Dynamical mechanism of composite W and Z is studied in a 1/N field theory model with four-fermion interactions in which global weak SU(2) symmetry is broken explicitly by electromagnetic interaction. Issues involved in such a model are discussed in detail. Deviation from gauge coupling due to compositeness and higher order loop corrections are examined to show that this class of models are consistent not only theoretically but also experimentally.

  4. Polyarylether composition and membrane

    DOEpatents

    Hung, Joyce; Brunelle, Daniel Joseph; Harmon, Marianne Elisabeth; Moore, David Roger; Stone, Joshua James; Zhou, Hongyi; Suriano, Joseph Anthony

    2010-11-09

    A composition including a polyarylether copolymer is provided. The copolymer includes a polyarylether backbone; and a sulfonated oligomeric group bonded to the polyarylether suitable for use as a cation conducting membrane. Method of bonding a sulfonated oligomeric group to the polyarylether backbone to form a polyarylether copolymer. The membrane may be formed from the polyarylether copolymer composition. The chain length of the sulfonated oligomeric group may be controlled to affect or control the ion conductivity of the membrane.

  5. Chemistry of bottom sediments from the Cal-Sag channel and the Des Plaines and Illinois Rivers between Joliet and Havana, Illinois

    SciTech Connect

    Harrison, W.; Kucera, E.T.; Tome, C.; Van Loon, L.S.; Van Luik, A.

    1981-02-01

    Cores were taken in 28 actual or proposed maintenance-dredging areas. Sixty-one core samples were analyzed to provide a data base for subsequent studies of the suitability of the potential dredged material for reclamation of abandoned surface-mined land bordering the Illinois Waterway. Samples were composited over 2-ft depth increments, up to a maximum 8-ft depth where possible. Parameters determined for each sample were: volatile solids, flash point, polyaromatic hydrocarbons (PAHs), base/neutral organic compounds, pH, total phosphorus, total phenols, oil and grease, polychlorinated biphenyls (PCBs), cyanide, arsenic, barium, cadmium, chromium, copper, lead, mercury, zinc, silver, nickel, selenium, and sulfide. Results showed PCBs to be higher in the Cal-Sag Channel sediments (..mu..=7.0 mg/kg) than in the Des Plaines River (..mu..=1.6 mg/kg), or Illinois River (..mu..=0.5 mg/kg) sediments. Concentrations of metals including arsenic, barium, cadmium, copper, lead, nickel, and silver were higher in the Des Plaines River samples than in the Cal-Sag Channel or Illinois River samples. Illinois River sediments were, generally, the least contaminated in terms of the measured parameters. Leach tests for arsenic, chromium, copper, lead, nickel, and zinc indicated low leachate-metal concentrations relative to total metal concentrations; thus, these metals exist in relatively insoluble solid states in the sediments.

  6. Bonded and Stitched Composite Structure

    NASA Technical Reports Server (NTRS)

    Zalewski, Bart F. (Inventor); Dial, William B. (Inventor)

    2014-01-01

    A method of forming a composite structure can include providing a plurality of composite panels of material, each composite panel having a plurality of holes extending through the panel. An adhesive layer is applied to each composite panel and a adjoining layer is applied over the adhesive layer. The method also includes stitching the composite panels, adhesive layer, and adjoining layer together by passing a length of a flexible connecting element into the plurality of holes in the composite panels of material. At least the adhesive layer is cured to bond the composite panels together and thereby form the composite structure.

  7. Tribology of polymer composites

    SciTech Connect

    Friedrich, K.

    1993-12-31

    Polymer composites are more and more used as structural components which are very often subjected to friction and wear loadings under use. This overview describes the following cases: (1) short fiber/thermoplastic matrix composites and their friction and wear properties as a function of both microstructural composition and external testing conditions. Special attention is focused on the effects of different polymer matrices, fiber reinforcements, and additional internal lubricants on the coefficient of friction and the specific wear rate of these materials when sliding against hard steel counterparts. Further effects on these tribological properties due to changes in testing temperature, sliding speed and contact pressure are outlined; (2) results of sliding wear experiments with continuous glass, carbon or aramid fiber/polymer matrix composites against steel counterparts. They were used to develop a hypothetical model composite with optimum wear resistance. This was achieved for hybrids with carbon fibers parallel and aramid fibers normal to the sliding direction of the counterpart; and (3) the friction and wear performance of thin layer composites strengthened with steel backeners to sustain very high pressure loadings during sliding wear.

  8. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  9. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  10. Effects of ghrelin and des-acyl ghrelin on neurogenesis of the rat fetal spinal cord

    SciTech Connect

    Sato, Miho; Nakahara, Keiko; Goto, Shintaro; Kaiya, Hiroyuki; Miyazato, Mikiya . E-mail: a0d201u@cc.miyazaki-u.ac.jp; Date, Yukari; Nakazato, Masamitsu; Kangawa, Kenji; Murakami, Noboru

    2006-11-24

    Expressions of the growth hormone secretagogue receptor (GHS-R) mRNA and its protein were confirmed in rat fetal spinal cord tissues by RT-PCR and immunohistochemistry. In vitro, over 3 nM ghrelin and des-acyl ghrelin induced significant proliferation of primary cultured cells from the fetal spinal cord. The proliferating cells were then double-stained using antibodies against the neuronal precursor marker, nestin, and the cell proliferation marker, 5-bromo-2'-deoxyuridine (BrdU), and the nestin-positive cells were also found to be co-stained with antibody against GHS-R. Furthermore, binding studies using [{sup 125}I]des-acyl ghrelin indicated the presence of a specific binding site for des-acyl ghrelin, and confirmed that the binding was displaced with unlabeled des-acyl ghrelin or ghrelin. These results indicate that ghrelin and des-acyl ghrelin induce proliferation of neuronal precursor cells that is both dependent and independent of GHS-R, suggesting that both ghrelin and des-acyl ghrelin are involved in neurogenesis of the fetal spinal cord.

  11. Functional reconstitution of receptors for bradykinin and des argZ-bradykinin from pulmonary artery membranes

    SciTech Connect

    Cahill, M.C.; Polgar, P.; Dickey, B.F.; Fishman, J.B.

    1987-05-01

    Bradykinin (BK) is a vasoactive peptide which mediates a number of vascular functions, including activation of prostaglandin biosynthesis and modulation of vasomotor tone. BK and its kinase II metabolite, des argZ-BK, have been reported to activate the B2 and B1 receptors, respectively. The authors prepared membranes from the bovine pulmonary artery and solubilized membrane proteins using the zwitterionic detergent CHAPS (3-((3-cholamidopropyl) dimethylammonio)-1-propanesulfonate). The solubilized proteins were reconstituted into liposomes via a gel filtration method. The vesicles specifically bound both TH-BK and TH-des argZ-BK, although the latter bound with significantly lower affinity. The binding of TH-BK was inhibited 65% by guanosine 5'-0-thiotriphosphate S while the binding of TH-des argZ-BK was unaffected. This suggests that the receptor for BK was associated with a guanine-nucleotide binding protein whereas the receptor for des argZ-BK was not. Since des argZ-BK has recently been reported to be considerably less potent than BK at activating the turnover of phosphatidylinositol, the authors data suggest that this is due to the des argZ-BK receptor not being coupled to a G-protein. Further work towards characterizing these receptors is now underway.

  12. Attachment of human C5a des Arg to its cochemotaxin is required for maximum expression of chemotactic activity.

    PubMed Central

    Perez, H D; Chenoweth, D E; Goldstein, I M

    1986-01-01

    The chemotactic activity of human C5a des Arg is enhanced significantly by an anionic polypeptide (cochemotaxin) in normal human serum and plasma. We have found that the cochemotaxin attaches to the oligosaccharide chain of native C5a des Arg to form a complex with potent chemotactic activity for human polymorphonuclear leukocytes. Although capable of enhancing the chemotactic activity of native C5a des Arg, the cochemotaxin had no effect on the chemotactic activity of either deglycosylated C5a des Arg, native C5a, or N-formyl-methionyl-leucyl-phenylalanine. Of the known components of the oligosaccharide chain, only sialic acid prevented enhancement by the cochemotaxin of the chemotactic activity exhibited by native C5a des Arg. Sialic acid also prevented the formation of C5a des Arg-cochemotaxin complexes, detected by acid polyacrylamide gel electrophoresis, molecular sieve chromatography on polyacrylamide gels, and sucrose density gradient ultracentrifugation. Images PMID:3782473

  13. Des-acyl ghrelin prevents heatstroke-like symptoms in rats exposed to high temperature and high humidity.

    PubMed

    Inoue, Yoshiyuki; Hayashi, Yujiro; Kangawa, Kenji; Suzuki, Yoshihiro; Murakami, Noboru; Nakahara, Keiko

    2016-02-26

    We have shown previously that des-acyl ghrelin decreases body temperature in rats through activation of the parasympathetic nervous system. Here we investigated whether des-acyl ghrelin ameliorates heatstroke in rats exposed to high temperature. Peripheral administration of des-acyl ghrelin significantly attenuated hyperthermia induced by exposure to high-temperature (35°C) together with high humidity (70-80%). Although biochemical analysis revealed that exposure to high temperature significantly increased hematocrit and the serum levels of aspartate amino transferase (AST), alanine transaminase (ALT), blood urea nitrogen (BUN), creatinine and electrolytes (Na(+), K(+), Cl(-)), most of these heatstroke-associated reactions were significantly reduced by treatment with des-acyl ghrelin. The level of des-acyl ghrelin in plasma was also found to be significantly increased under high-temperature conditions. These results suggest that des-acyl ghrelin could be useful for preventing heatstroke under high temperature condition. PMID:26773867

  14. Etat des lieux des mycobactérioses atypiques au Burkina Faso: résultats d'une enquête régionale

    PubMed Central

    Zida, Sylvie; Tarnagda, Zékiba; Kaboré, Antoinette; Zingué, Dézémon; Hien, Hervé; Sanou, Adama; Michel Gomgnimbou, Kireopori; Nouctara, Moumini; Ouédraogo, Mamoudou; Ouédraogo, Oumarou; Godreuil, Sylvain; Méda, Nicolas

    2014-01-01

    Introduction L’étude avait pour but de déterminer la fréquence d'isolement des mycobactéries atypiques chez les patients déclarés tuberculeux pulmonaire à microscopie positive (TPM+) au Burkina Faso. Méthodes Il s'est agit d'une étude transversale qui s'est déroulée de mars 2011 à février 2012. Les patients TPM+ de plus de 15 ans ont été inclus dans l’étude de manière systématique dans les centres de diagnostic et de traitement (CDT) de la région sanitaire des Hauts Bassins. Une culture des mycobactéries et une identification biochimique ont été réalisées sur les échantillons des patients TPM+ La sérologie VIH a été réalisée par des tests rapides. Résultats Une fréquence de 11% (8/73) de mycobactéries atypiques et 89,0% (65/73) de mycobactéries du complexe tuberculosis ont été identifiées des 73 patients TPM+ inclus dans l’étude. La tranche d’âge de 20 à 40 ans était la plus touchée par les mycobactérioses en général et constituait 48% de l’échantillon. Nous avons trouvé 12,2% (8 / 66) de patients VIH positif, 83,3% (55 / 66) de patients VIH négatif et 4,5% (3 / 66) de patients dont le statut VIH était indéterminé. Conclusion Notre étude a mis en lumière l'implication des mycobactéries atypiques dans la pathogénie de certains patients déclarés TPM+. Le rôle des mycobactéries atypiques dans les infections pulmonaires est probablement sous estimé et devra être examiné avec plus de détails et sur un échantillon plus grand. PMID:25396014

  15. Magma chamber history related to the shield building stage of Piton des Neiges volcano, La Réunion Island

    NASA Astrophysics Data System (ADS)

    Berthod, Carole; Michon, Laurent; Famin, Vincent; Bascou, Jérôme; Bachelery, Patrick

    2016-04-01

    Piton des Neiges volcano (La Réunion hotspot) experienced a long-lasting shield building stage before entering its degenerative stage 0.4 my ago. The deep edifice incision due to the intense tropical erosion allowed the description for several decades of a layered gabbroic complex interpreted as a piece of magma chamber, which has been tectonically displaced (Chevallier & Vatin-Perignon, 1982; Upton & Wadsworth, 1972). Here, we combine field investigations, petrographic, mineralogical, geochemical and anisotropy of magnetic susceptibility (AMS) studies to constrain the spatial distribution of the plutonic complex, to identify the physical and chemical processes and to integrate this complex in the evolution of Piton des Neiges (PdN). Field investigations allowed us to discover three additional massifs of gabbro and peridotite along the Mât River. The four massifs are overlaid by a pile of basic sills and a breccia interpreted as a debris avalanche deposit. Albeit spatially disconnected, the massifs show a relatively constant dip of the magnetic foliation toward the current summit of the volcano (i.e. toward the SSE). The two massifs cropping in the upper Mât River are exclusively composed of massive dunite and wherlite units with a cumulate texture and no visible dynamic structures. The two massifs located in the lower Mât River are made of olivine-gabbro, ferrogabbro and gabbro showing numerous flow structures and synmagmatic faults that indicates instabilities which trend NNW-SSE. Minerals (olivine, clinopyroxene and oxide) present primitive compositions in the two upper massifs and slightly differentiated ones in the lower massif. Given the consistency of our dataset, we propose that the four massifs correspond to outcrops of a unique chemically stratified magma chamber, whose center would have been located about 4 km North of the current summit of PdN. The existence of an initial PdN, North of the current edifice, is supported by morphological

  16. Oxygen isotopes reveal crustal contamination and a large, still partially molten magma chamber in Chaîne des Puys (French Massif Central)

    NASA Astrophysics Data System (ADS)

    France, Lydéric; Demacon, Mickael; Gurenko, Andrey A.; Briot, Danielle

    2016-09-01

    The two main magmatic properties associated with explosive eruptions are high viscosity of silica-rich magmas and/or high volatile contents. Magmatic processes responsible for the genesis of such magmas are differentiation through crystallization, and crustal contamination (or assimilation) as this process has the potential to enhance crystallization and add volatiles to the initial budget. In the Chaîne des Puy series (French Massif Central), silica- and H2O-rich magmas were only emitted during the most recent eruptions (ca. 6-15 ka). Here, we use in situ measurements of oxygen isotopes in zircons from two of the main trachytic eruptions from the Chaîne des Puys to track the crustal contamination component in a sequence that was previously presented as an archetypal fractional crystallization series. Zircons from Sarcoui volcano and Puy de Dôme display homogeneous oxygen isotope compositions with δ18O = 5.6 ± 0.25‰ and 5.6 ± 0.3‰, respectively, and have therefore crystallized from homogeneous melts with δ18Omelt = 7.1 ± 0.3‰. Compared to mantle derived melts resulting from pure fractional crystallization (δ18Odif.mant. = 6.4 ± 0.4‰), those δ18Omelt values are enriched in 18O and support a significant role of crustal contamination in the genesis of silica-rich melts in the Chaîne des Puys. Assimilation-fractional-crystallization models highlight that the degree of contamination was probably restricted to 5.5-9.5% with Rcrystallization/Rassimilation varying between 8 and 14. The very strong intra-site homogeneity of the isotopic data highlights that magmas were well homogenized before eruption, and consequently that crustal contamination was not the trigger of silica-rich eruptions in the Chaîne des Puys. The exceptionally strong inter-site homogeneity of the isotopic data brings to light that Sarcoui volcano and Puy de Dôme were fed by a single large magma chamber. Our results, together with recent thermo-kinetic models and an experimental

  17. La prévention des blessures non intentionnelles chez les enfants et adolescents autochtones au Canada

    PubMed Central

    Banerji, Anna

    2012-01-01

    RÉSUMÉ Les blessures non intentionnelles sont la principale cause de décès chez les enfants et adolescents autochtones canadiens, à un taux de trois à quatre fois la moyenne nationale. Non seulement les décès et les blessures invalidantes dévastent les familles et les communautés, mais elles font également d’énormes ravages sur les ressources de santé. L’absence de statistiques, de surveillance continue ou de programmes de prévention des blessures à l’égard des enfants et adolescents autochtones exacerbe les coûts en matière de main-d’œuvre et de santé. Les communautés autochtones sont hétérogènes sur le plan culturel, qu’il s’agisse de l’accès aux ressources ou même des risques et des types de blessures. Pourtant, en général, ces communautés sont beaucoup plus susceptibles d’être pauvres, d’habiter dans un logement insalubre et d’éprouver de la difficulté à accéder aux soins de santé, des facteurs qui accroissent le risque et les conséquences des blessures. Il existe un besoin urgent de surveillance des blessures, de recherche, de renforcement des capacités, de diffusion des connaissances et de programmes de prévention des blessures qui sont axés sur les populations autochtones. Pour prévenir les blessures de manière efficace, il faut adopter des démarches multidisciplinaires, coopératives et durables, fondées sur des pratiques exemplaires, tout en étant spécifiques et sensibles sur le plan culturel et linguistique.

  18. Influence des paramètres de dépôt sur la morphologie de films minces de tétraborate de lithium obtenus par le procédé ``PYROSOL"

    NASA Astrophysics Data System (ADS)

    Bornand, V.; El Bouchikhi, A.; Papet, Ph.; Philippot, E.

    1997-04-01

    Li2B4O7 piezo-electric thin films were prepared by “PYROSOL" process which is a useful method for the elaboration of thin films. Morphological development and crystallization of thin films are very dependent on the experimental parameters like the substrate temperature, the concentration and the relative proportion of the precursors in methyl alcohol. The effect of these various parameters were studied in order to obtain homogeneous, crystallized and oriented thin films. La réalisation de couches minces de matériaux piézo-électriques de Li2B4O7 par le procédé “PYROSOL" révèle une grande diversité de conditions de dépôt. La température du substrat, la composition des solutions de précurseurs et leur concentration conditionnent la morphologie et l'état de cristallisation des films. En particulier, l'obtention de couches minces denses, homogènes et présentant une orientation préférentielle nécessite des températures de substrat supérieures à 620 ^{circ}C. L'influence de ces divers paramètres expérimentaux a été étudiée dans le but d'obtenir des dépôts homogènes, cristallisés et orientés.

  19. Etude de Degradation des Resines Epoxy Sous L'action des Decharges Partielles

    NASA Astrophysics Data System (ADS)

    Hudon, Claude

    Over the past few decades, epoxy resin composites have been extensively used in the high voltage insulation systems of rotating machines. Although these materials exhibit good mechanical performance, are thermally stable and present intrinsically excellent resistance against electrical discharge attack, their actual life under alienating high voltage is always shorter than predicted. Among the leading causes responsible for premature failure of rotating machine insulation are slot discharges which are characterized by extremely large pulses. Partial discharges occurring within the occluded cavities in the epoxy resin of the insulation can also lead to breakdown of the insulating system, but the degradation mechanism is somewhat more obscure. The reason is that the degradation results form a complex synergistic action of electronic and ionic surface bombardment, of ultraviolet radiation and of electrochemical reactions in a confined and non-vented space that is in most cases inaccessible for careful observation and analysis. Most investigations usually rely either on discharge signal analysis, or on the analysis of the resulting material modifications if available following failure. Most investigations on machine insulation merely attempt to predict failure in terms of partial discharge pulse data and are less concerned with the understanding of the degradation process itself. In the present work, a comparative study, using parallel-plane epoxy-covered electrodes, is carried out on the interrelation between the discharge signal behavior and the associated degradation of the epoxy resin. Examination of the behavior in terms of measured amplitude of the electrical pulse component and the light emission intensity, disclosed the presence of three types of discharges, namely spark, glow and pseudoglow discharges. Since conventional partial discharge detection only responds to fast voltage drops, the latter two forms of discharge generally evade detection. The intent of

  20. Utilisation des technologies d'impression pour le remplissage industriel des trous d'interconnexion

    NASA Astrophysics Data System (ADS)

    Blonde, Paul

    60 microns with a maximum placement error on the substrate of the order of +/- 20 microns. We estimated that filling TSVs with an opening of 70 microns and higher is possible with our inkjet DOD (non defined) process. Finally, we experimentally addressed the vias filling by studying the behavior of nanoparticles in the vias during the evaporation of the carrier fluid and the annealing of the gold/tin alloy nanoparticles of eutectic composition. This last step revealed the incompatibility of non-homogenous AuSn alloy particles with the temperature window requirement used during sintering. To overcome this defect we replaced the Au80Sn20 by tin nanoparticles to complete our analysis of the impact of the use of PVP in the suspension of nanoparticles on the resistivity after annealing in the vias. Most aspects of this project being interrelated, much attention has been paid to the study of the influence of the various parameters on the quality of prints realized. The main conclusion is that we are able to validate the use of inkjet technologies as an alternative to perform the filling of TSVs by metal alloy nanoparticles. This conclusion is subject to the feasibility of the adaptation of our suspension and annealing methods to nanopowders alloys other than gold/tin and tin.

  1. Contrôler la douleur et réduire l’usage abusif d’opioïdes

    PubMed Central

    Kotalik, Jaro

    2012-01-01

    Résumé Objectif Aider les médecins de famille à faire un juste équilibre sur le plan de l’éthique dans leurs pratiques de prescription d’opioïdes. Source des données Une recension des articles en anglais publiés entre 1985 et 2011 a été effectuée dans MEDLINE. La majorité des données probantes étaient de niveau III. Message principal Il est essentiel de suivre les guides de pratique clinique quand on prescrit des opioïdes, sauf s’il est démontré qu’une autre option est justifiée. De plus, quand on réfléchit à la pertinence de prescrire des opioïdes et aux nombreuses implications sur le plan de l’éthique, il est utile de fonder sa décision sur l’application des principes éthiques de la bienfaisance, de la non-malfaisance, du respect de l’autonomie et de la justice. En outre, il est essentiel de se tenir au fait des changements dans les lois et la règlementation, ainsi qu’à propos des registres électroniques provinciaux des ordonnances d’opioïdes. Conclusion Les médecins doivent s’assurer que la douleur de leurs patients est bien évaluée et prise en charge. Le contrôle optimal de la douleur peut exiger la prescription d’opioïdes. Cependant, l’obligation de soulager la douleur doit être exercée en juste équilibre avec l’acquittement de la responsabilité tout aussi importante de ne pas exposer les patients au risque de dépendance et de ne pas créer de possibilités de détournement de drogues, de trafic et de dépendance chez d’autres personnes. Les principes éthiques fondamentaux offrent un cadre de réflexion qui peut aider les médecins à prendre des décisions appropriées sur le plan de l’éthique au sujet de la prescription d’opioïdes.

  2. Multilayer Composite Pressure Vessels

    NASA Technical Reports Server (NTRS)

    DeLay, Tom

    2005-01-01

    A method has been devised to enable the fabrication of lightweight pressure vessels from multilayer composite materials. This method is related to, but not the same as, the method described in gMaking a Metal- Lined Composite-Overwrapped Pressure Vessel h (MFS-31814), NASA Tech Briefs, Vol. 29, No. 3 (March 2005), page 59. The method is flexible in that it poses no major impediment to changes in tank design and is applicable to a wide range of tank sizes. The figure depicts a finished tank fabricated by this method, showing layers added at various stages of the fabrication process. In the first step of the process, a mandrel that defines the size and shape of the interior of the tank is machined from a polyurethane foam or other suitable lightweight tooling material. The mandrel is outfitted with metallic end fittings on a shaft. Each end fitting includes an outer flange that has a small step to accommodate a thin layer of graphite/epoxy or other suitable composite material. The outer surface of the mandrel (but not the fittings) is covered with a suitable release material. The composite material is filament- wound so as to cover the entire surface of the mandrel from the step on one end fitting to the step on the other end fitting. The composite material is then cured in place. The entire workpiece is cut in half in a plane perpendicular to the axis of symmetry at its mid-length point, yielding two composite-material half shells, each containing half of the foam mandrel. The halves of the mandrel are removed from within the composite shells, then the shells are reassembled and bonded together with a belly band of cured composite material. The resulting composite shell becomes a mandrel for the subsequent steps of the fabrication process and remains inside the final tank. The outer surface of the composite shell is covered with a layer of material designed to be impermeable by the pressurized fluid to be contained in the tank. A second step on the outer flange of

  3. La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

    PubMed Central

    Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

    2012-01-01

    Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des

  4. Impetus of composite mechanics on test methods for fiber composites

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1978-01-01

    The impetus of composite mechanics on composite test methods and/or on interpreting test results is described by using examples from composite micromechanics, composite macromechanics and laminate theory. The specific examples included contributions such as criteria for selecting resin matrices for improved composite strength, the 10 deg off-axis tensile test, criteria for configuring hybrids and superhybrids for improved impact resistance and the reduced bending rigidities concept for buckling and vibration analyses.

  5. Graphene nanoribbon composites.

    PubMed

    Rafiee, Mohammad A; Lu, Wei; Thomas, Abhay V; Zandiatashbar, Ardavan; Rafiee, Javad; Tour, James M; Koratkar, Nikhil A

    2010-12-28

    It is well established that pristine multiwalled carbon nanotubes offer poor structural reinforcement in epoxy-based composites. There are several reasons for this which include reduced interfacial contact area since the outermost nanotube shields the internal tubes from the matrix, poor wetting and interfacial adhesion with the heavily cross-linked epoxy chains, and intertube slip within the concentric nanotube cylinders leading to a sword-in-sheath type failure. Here we demonstrate that unzipping such multiwalled carbon nanotubes into graphene nanoribbons results in a significant improvement in load transfer effectiveness. For example, at ∼0.3% weight fraction of nanofillers, the Young's modulus of the epoxy composite with graphene nanoribbons shows ∼30% increase compared to its multiwalled carbon nanotube counterpart. Similarly the ultimate tensile strength for graphene nanoribbons at ∼0.3% weight fraction showed ∼22% improvement compared to multiwalled carbon nanotubes at the same weight fraction of nanofillers in the composite. These results demonstrate that unzipping multiwalled carbon nanotubes into graphene nanoribbons can enable their utilization as high-performance additives for mechanical properties enhancement in composites that rival the properties of singlewalled carbon nanotube composites yet at an order of magnitude lower cost. PMID:21080652

  6. Composites: A viable option

    NASA Technical Reports Server (NTRS)

    Mccarty, John E.

    1991-01-01

    While it sounded great to be asked to talk about composites, I found it difficult to select subject areas that would be of real interest. My choice is based on saying some things about where the maturity of the composite aircraft structures is today and what that means in terms of future criteria for application. This focus was the basis for my title selection. The other issue that will be addressed was requested by NASA and focuses on composites structures cost. This fits well with the state-of-the-art interpretations I will discuss first, since the cost issue must be viewed from both the current status and future points of view. The difficulty in presenting something in these areas is not in the subjects themselves but in trying to present a real world viewpoint to an audience of composite experts. So, with recognition of the expertise of the audience, I hope you will see something in this presentation about how to view composite aircraft structure.

  7. Terahertz plasmonic composites.

    PubMed

    Nemat-Nasser, Syrus C; Amirkhizi, Alireza V; Padilla, Willie J; Basov, Dimitri N; Nemat-Nasser, Sia; Bruzewicz, Derek; Whitesides, George

    2007-03-01

    The dielectric response of a polymer matrix composite can be substantially modified and tuned within a broad frequency band by integrating within the material an artificial plasmon medium composed of periodically distributed, very thin, electrically conducting wires. In the microwave regime, such plasmon/polymer composites have been studied analytically, computationally, and experimentally. This work reports the design, fabrication, and characterization of similar composites for operation at terahertz frequencies. Such composites require significant reduction in the thickness and spacing of the wires. We used numerical modeling to design artificial effective plasmonic media with turn-on frequencies in the terahertz range. Prototype samples were produced by lithographically embedding very thin gold strips into a PDMS [poly(dimethylsiloxane)] matrix. These samples were characterized with a Fourier-transform infrared interferometer using the frequency-dependent transmission and Kramers-Kronig relations to determine the electromagnetic properties. We report the characterization results for a sample, demonstrating excellent agreement between theory, computer design, and experiment. To our knowledge this is the first demonstration of the possibility of creating composites with tuned dielectric response at terahertz frequencies. PMID:17500816

  8. Compositionally Driven Dynamos

    NASA Astrophysics Data System (ADS)

    Soderlund, K. M.; Schubert, G.

    2014-12-01

    It is generally believed that compositional convection driven by inner core solidification is the main driver of the geodynamo. Thermal evolution considerations make it likely that compositional convection is also behind the present dynamos of Mercury and Ganymede as well as the early dynamos in the Moon, Mars and smaller solar system bodies. Compositional buoyancy can arise in several different ways, for example, through inner core solidification and FeS flotation with upward mixing and through freezing out and sinking of iron snow near the core-mantle boundary or deeper within the core. The mode of core cooling and freezing depends on conditions of temperature and pressure in the core and the concentration of light elements such as sulfur. Different distributions of compositional buoyancy will give rise to different patterns of core convection and dynamo magnetic fields. We report here the first results of a systematic study of the distribution of compositional buoyancy on the dynamo-generated magnetic fields, with an emphasis on Mars' core evolution due to iron rain.

  9. Terahertz plasmonic composites

    NASA Astrophysics Data System (ADS)

    Nemat-Nasser, Syrus C.; Amirkhizi, Alireza V.; Padilla, Willie J.; Basov, Dimitri N.; Nemat-Nasser, Sia; Bruzewicz, Derek; Whitesides, George

    2007-03-01

    The dielectric response of a polymer matrix composite can be substantially modified and tuned within a broad frequency band by integrating within the material an artificial plasmon medium composed of periodically distributed, very thin, electrically conducting wires. In the microwave regime, such plasmon/polymer composites have been studied analytically, computationally, and experimentally. This work reports the design, fabrication, and characterization of similar composites for operation at terahertz frequencies. Such composites require significant reduction in the thickness and spacing of the wires. We used numerical modeling to design artificial effective plasmonic media with turn-on frequencies in the terahertz range. Prototype samples were produced by lithographically embedding very thin gold strips into a PDMS [poly(dimethylsiloxane)] matrix. These samples were characterized with a Fourier-transform infrared interferometer using the frequency-dependent transmission and Kramers-Kronig relations to determine the electromagnetic properties. We report the characterization results for a sample, demonstrating excellent agreement between theory, computer design, and experiment. To our knowledge this is the first demonstration of the possibility of creating composites with tuned dielectric response at terahertz frequencies.

  10. Composite mechanics for engine structures

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1989-01-01

    Recent research activities and accomplishments at Lewis Research Center on composite mechanics for engine structures are summarized. The activities focused mainly on developing procedures for the computational simulation of composite intrinsic and structural behavior. The computational simulation encompasses all aspects of composite mechanics, advanced three-dimensional finite-element methods, damage tolerance, composite structural and dynamic response, and structural tailoring and optimization.

  11. Composite mechanics for engine structures

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1987-01-01

    Recent research activities and accomplishments at Lewis Research Center on composite mechanics for engine structures are summarized. The activities focused mainly on developing procedures for the computational simulation of composite intrinsic and structural behavior. The computational simulation encompasses all aspects of composite mechanics, advanced three-dimensional finite-element methods, damage tolerance, composite structural and dynamic response, and structural tailoring and optimization.

  12. Nanostructured metal-polyaniline composites

    DOEpatents

    Wang, Hsing-Lin; Li, Wenguang; Bailey, James A.; Gao, Yuan

    2010-08-31

    Metal-polyaniline (PANI) composites are provided together with a process of preparing such composites by an electrodeless process. The metal of the composite can have nanoscale structural features and the composites can be used in applications such as catalysis for hydrogenation reactions and for analytical detection methods employing SERS.

  13. Track recording plastic compositions

    NASA Technical Reports Server (NTRS)

    Tarle, Gregory (Inventor)

    1983-01-01

    Improved nuclear track recording plastic compositions are provided which exhibit greatly decreased surface roughness when etched to produce visible tracks of energetic nuclear particles which have passed into and/or through said plastic. The improved compositions incorporate a small quantity of a phthalic acid ester into the major plastic component which is derived from the polymerization of monomeric di-ethylene glycol bis allyl carbonate. Di-substituted phthalic acid esters are preferred as the added component, with the further perference that the ester substituent has a chain length of 2 or more carbon atoms. The inclusion of the phthalic acid ester to an extent of from about 1-2% by weight of the plastic compositions is sufficient to drastically reduce the surface roughness ordinarily produced when the track recording plastic is contacted by etchants.

  14. Raman spectroscopy of composites

    SciTech Connect

    Young, R.J.; Andrews, M.C.; Yang, X.; Huang, Y.L.; Gu, X.; Day, R.J.

    1994-12-31

    It is demonstrated that Raman Spectroscopy can be used to follow the micromechanics of the deformation of high-performance fibers within composites. The technique can be applied to a wide range of fiber systems including aramids, carbon and ceramic (using fluorescence spectroscopy) fibers. Well-defined Raman spectra are obtained and the position of the Raman bands shift on the application of stress or strain. It is possible to determine the point-to-point variation of strain along an individual fiber inside a transparent matrix under any general state of stress or strain. Examples are given of the use of the technique to study a variety of phenomena in a wide range of composite systems. The phenomena investigated include thermal stresses, fiber/matrix adhesion, matrix yielding for both fragmentation and pull-out tests. The systems studied include aramid/epoxy, carbon/epoxy and ceramic-fiber/glass composites.

  15. Carbon-carbon composites

    NASA Technical Reports Server (NTRS)

    Maahs, Howard G.

    1992-01-01

    The current applications of C-C composites extend to aircraft brakes, rocket nozzles, missile nosetips, and leading edges of the Space Shuttle. More advanced, secondary and even primary structure applications in cyclic, high-temperature oxidizing environments depend on effective oxidation protection for repeated missions. Accounts are presently given of state-of-the-art methods in substrate fabrication, carbon deposition, and SiC and Si3N4 protective coatings. Attention is given to current levels of high temperature oxidation protection for various mission and vehicle types, as well as to performance projections for C-C composites used by a representative National Aerospace Plane airframe structure. Future technology requirements in C-C composites are projected.

  16. Chemical composition of Mars

    NASA Technical Reports Server (NTRS)

    Morgan, J. W.; Anders, E.

    1979-01-01

    The chemical composition of Mars is estimated from the cosmochemical model of Ganapathy and Anders (1974) with additional petrological and geophysical constraints. The model assumes that planets and chondrites underwent the same fractionation processes in the solar nebula, and constraints are imposed by the abundance of the heat-producing elements, U, Th and K, the volatile-rich component and the high density of the mantle. Global abundances of 83 elements are presented, and it is noted that the mantle is an iron-rich garnet wehrlite, nearly identical to the bulk moon composition of Morgan at al. (1978) and that the core is sulfur poor (3.5% S). The comparison of model compositions for the earth, Venus, Mars, the moon and a eucrite parent body suggests that volatile depletion correlates mainly with size rather than with radial distance from the sun.

  17. Ceramic composite coating

    DOEpatents

    Wicks, George G.

    1997-01-01

    A thin, room-temperature-curing, ceramic composite for coating and patching etal substrates comprises a sol gel silica glass matrix filled with finely ground particles or fibers, preferably alumina. The sol gel glass is made by adding ethanol to water to form a first mixture, then separately adding ethanol to tetraethyl orthosilicate to form a second mixture, then slowly adding the first to the second mixture to make a third mixture, and making a slurry by adding the finely ground particles or fibers to the third mixture. The composite can be applied by spraying, brushing or trowelling. If applied to patch fine cracks, densification of the ceramic composite may be obtained to enhance sealing by applying heat during curing.

  18. Ceramic composite coating

    DOEpatents

    Wicks, G.G.

    1997-01-21

    A thin, room-temperature-curing, ceramic composite for coating and patching metal substrates comprises a sol gel silica glass matrix filled with finely ground particles or fibers, preferably alumina. The sol gel glass is made by adding ethanol to water to form a first mixture, then separately adding ethanol to tetraethyl orthosilicate to form a second mixture, then slowly adding the first to the second mixture to make a third mixture, and making a slurry by adding the finely ground particles or fibers to the third mixture. The composite can be applied by spraying, brushing or trowelling. If applied to patch fine cracks, densification of the ceramic composite may be obtained to enhance sealing by applying heat during curing.

  19. Ceramic Composite Thin Films

    NASA Technical Reports Server (NTRS)

    Ruoff, Rodney S. (Inventor); Stankovich, Sasha (Inventor); Dikin, Dmitriy A. (Inventor); Nguyen, SonBinh T. (Inventor)

    2013-01-01

    A ceramic composite thin film or layer includes individual graphene oxide and/or electrically conductive graphene sheets dispersed in a ceramic (e.g. silica) matrix. The thin film or layer can be electrically conductive film or layer depending the amount of graphene sheets present. The composite films or layers are transparent, chemically inert and compatible with both glass and hydrophilic SiOx/silicon substrates. The composite film or layer can be produced by making a suspension of graphene oxide sheet fragments, introducing a silica-precursor or silica to the suspension to form a sol, depositing the sol on a substrate as thin film or layer, at least partially reducing the graphene oxide sheets to conductive graphene sheets, and thermally consolidating the thin film or layer to form a silica matrix in which the graphene oxide and/or graphene sheets are dispersed.

  20. Janus Composite Nanotubes.

    PubMed

    Chen, Ying; Liu, Zhen; Qu, Xiaozhong; Liang, Fuxin; Yang, Zhenzhong

    2016-06-21

    We propose a facile method to achieve paramagnetic Janus nanotubes with two compositions compartmentalized onto the interior and exterior surfaces, respectively. A sulfonated polydivinylbenzene (PDVB) nanotube is prepared by simple sulfonation of the exterior surface of a PDVB nanotube. Silica@FeOOH dual layers are sequentially grown onto the sulfonated PDVB nanotube surface. The composite nanotubes become paramagnetic after calcination and can be broken into shorter pieces under vigorous ultrasonication. After selective modification of the interior and exterior surfaces of the paramagnetic nanotubes, the nanotube shell becomes Janus in wettability. Desired hydrophobic species can be selectively captured inside the cavity. The paramagnetic Janus composite nanotubes can align into parallel chains under a magnetic field, which is self-disassembled upon removal of the magnetic field. PMID:27124877

  1. Polymer composites containing nanotubes

    NASA Technical Reports Server (NTRS)

    Bley, Richard A. (Inventor)

    2008-01-01

    The present invention relates to polymer composite materials containing carbon nanotubes, particularly to those containing singled-walled nanotubes. The invention provides a polymer composite comprising one or more base polymers, one or more functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers and carbon nanotubes. The invention also relates to functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers, particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having side chain functionalization, and more particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having olefin side chains and alkyl epoxy side chains. The invention further relates to methods of making polymer composites comprising carbon nanotubes.

  2. Saccharide antifreeze compositions

    DOEpatents

    Walters, Kent; Duman, John G; Serianni, Anthony S

    2013-12-10

    The invention provides an antifreeze glycolipid compounds and composition comprising a polysaccharide moiety of Formula I; ##STR00001## wherein D-Manp represents a D-mannopyranose moiety, D-Xylp represents a D-xylopyranose moiety, and n is about 5 to about 70; and one or more lipid moieties covalently linked to the polysaccharide moiety of Formula I or electrostatically associated with the polysaccaride moiety for Formula I. The antifreeze glycolipid compounds and compositions can be used for a variety of industrial, agricultural, medical, and cosmetic applications where recrystallization-inhibition, cyroprotection, or cryopreservation is desired. The antifreeze glycolipid compounds or compositions can be used as, for example, as cryoprotectants for tissue preservation and transplantation, improving the texture of processed frozen food and frozen meats, frostbit protection, crop protection, and green alternatives for land vehicle antifreeze and aircraft de-icing.

  3. Silicone-containing composition

    DOEpatents

    Mohamed, Mustafa

    2012-01-24

    A silicone-containing composition comprises the reaction product of a first component and an excess of an isocyanate component relative to the first component to form an isocyanated intermediary. The first component is selected from one of a polysiloxane and a silicone resin. The first component includes a carbon-bonded functional group selected from one of a hydroxyl group and an amine group. The isocyanate component is reactive with the carbon-bonded functional group of the first component. The isocyanated intermediary includes a plurality of isocyanate functional groups. The silicone-containing composition comprises the further reaction product of a second component, which is selected from the other of the polysiloxane and the silicone resin. The second component includes a plurality of carbon-bonded functional groups reactive with the isocyanate functional groups of the isocyanated intermediary for preparing the silicone-containing composition.

  4. Fractography of composite delamination

    NASA Technical Reports Server (NTRS)

    Bascom, W. D.

    1989-01-01

    Delamination is a major failure mode of carbon fiber organic matrix composites. It can occur under a variety of loading conditions. Efforts to develop predictive models of the delamination of carbon fiber composites are hampered by a lack of information about the micromechanics of impact damage and delamination growth. Crack formation and propagation in these materials cannot be observed in sufficient detail to determine micro-damage using currently available nondestructive methods such as acoustic backscattering or x ray imaging. Consequently, destructive methods are required. Delamination of composites in Mode I, Mode II and after low energy impact loads were investigated using metallographic techniques of potting the failed specimens, sectioning and examining the cut sections for damage modes.

  5. Modified Composite Materials Workshop

    NASA Technical Reports Server (NTRS)

    Dicus, D. L. (Compiler)

    1978-01-01

    The reduction or elimination of the hazard which results from accidental release of graphite fibers from composite materials was studied at a workshop. At the workshop, groups were organized to consider six topics: epoxy modifications, epoxy replacement, fiber modifications, fiber coatings and new fibers, hybrids, and fiber release testing. Because of the time required to develop a new material and acquire a design data base, most of the workers concluded that a modified composite material would require about four to five years of development and testing before it could be applied to aircraft structures. The hybrid working group considered that some hybrid composites which reduce the risk of accidental fiber release might be put into service over the near term. The fiber release testing working group recommended a coordinated effort to define a suitable laboratory test.

  6. Etudes des Reactions de Transfert LITHIUM-7/LITHIUM -6

    NASA Astrophysics Data System (ADS)

    Baddou, Djafer

    Les reactions de transfert de deux nucleons ^7Li/^6Li(^3He, rm p)^8Be/^9Be ont ete effectuees a partir d'um faisceau d'^3He initialement polarise et d'energie incidente egale a 4.58 MeV au centre de la cible. Le faisceau d'^3He est simplement ionise et il est accelere par l'accelerateur Van de Graaff de l'Universite Laval. Ce faisceau d' ^3He est de polarisation egale a 40% et il est obtenu a partir d'une source d'^3He a l'etat metastable. Nous avons decrit la reaction depuis la production et le transport du faisceau initial de l'^3 He jusqu'a la chambre de reaction. Par la suite, nous avons obtenu les distributions angulaires de la section efficace differentielle et du pouvoir d'analyse de ces reactions. Elles ont ete comparees a la theorie DWBA a l'approximation zero. La theorie a montre qu'il s'agit d'un transfert de deux particules independants (neutron, proton) pour le cas de la reaction ^7Li( ^3He,rm p)^9Be et d'un transfert de "cluster" deuteron pour le cas de la reaction ^6Li(^3He, rm p)^8Be. Notons que pour cette reaction l'instabilite du ^8Be ne nous permet pas d'avoir une diffusion elastique permettant la determination des parametres du modele optique entre ce noyau et la particule diffusee. Afin de contourner cette difficulte, nous supposons que le ^8 Be est un noyau compose de deux particules alpha et nous avons teste cette hypothese avec les reactions ^6Li(^3He, rm p)^8Be et ^7Li( ^3He,rm d)^8Be. Nous mentionnons a la fin que nous avons observe que l'etat fondamental de la reaction ^6Li( ^3He,rm p)^8Be et l'etat excite 2.43 MeV de la reaction ^7Li(^3He,rm p)^9Be sont des reactions directes alors que le premier etat excite (2.96 MeV) de la reaction ^6Li(^3He,rm p)^8Be et l'etat fondamental de la reaction ^7Li(^3He,rm p)^9Be peuvent etre domines par une reaction a noyau compose.

  7. Unibody Composite Pressurized Structure

    NASA Technical Reports Server (NTRS)

    Rufer, Markus; Conger, Robert; Bauer, Thomas; Newman, John

    2013-01-01

    An integrated, generic unibody composite pressurized structure (UCPS) combined with a positive expulsion device (PED), consisting of an elastomeric bladder for monopropellant hydrazine, has been quasi-standardized for spacecraft use. The combination functions as an all-composite, non-metallic, propellant tank with bladder. The integrated UCPS combines several previous innovations - specifically, the linerless, all-composite cryogenic tank technology; all-composite boss; resin formulation; and integrated stringer system. The innovation combines the UCPS with an integrated propellant management device (PMD), the PED or bladder, to create an entirely unique system for in-space use. The UCPS is a pressure vessel that incorporates skirts, stringers, and other structures so that it is both an in-space hydrazine tank, and also a structural support system for a spacecraft in a single, all-composite unit. This innovation builds on the progress in the development of a previous SBIR (Small Business Innovation Research) Phase I with Glenn Research Center and an SBIR III with Johnson Space Center that included the fabrication of two 42-in. (˜107-cm) diameter all-composite cryogenic (LOX and liquid methane) UCPS test tanks for a lunar lander. This Phase II provides hydra zine compatibility testing of the elastomeric bladder, a see-through PED to validate the expulsion process and model, and a complete UCPS-based PED with stringers and skirts that will be used to conduct initial qualification and expulsion tests. This extends the UCPS technology to include hydrazine-based, in-space pro - pulsion applications and can also be used for electric propulsion. This innovation creates a system that, in comparison to the traditional approach, is lower in weight, cost, volume, and production time; is stronger; and is capable of much higher pressures. It also has fewer failure modes, and is applicable to both chemical and electric propulsion systems.

  8. Nanotube composite carbon fibers

    NASA Astrophysics Data System (ADS)

    Andrews, R.; Jacques, D.; Rao, A. M.; Rantell, T.; Derbyshire, F.; Chen, Y.; Chen, J.; Haddon, R. C.

    1999-08-01

    Single walled carbon nanotubes (SWNTs) were dispersed in isotropic petroleum pitch matrices to form nanotube composite carbon fibers with enhanced mechanical and electrical properties. We find that the tensile strength, modulus, and electrical conductivity of a pitch composite fiber with 5 wt % loading of purified SWNTs are enhanced by ˜90%, ˜150%, and 340% respectively, as compared to the corresponding values in unmodified isotropic pitch fibers. These results serve to highlight the potential that exits for developing a spectrum of material properties through the selection of the matrix, nanotube dispersion, alignment, and interfacial bonding.

  9. Composition for absorbing hydrogen

    DOEpatents

    Heung, L.K.; Wicks, G.G.; Enz, G.L.

    1995-05-02

    A hydrogen absorbing composition is described. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  10. Generic composite flywheel designs

    NASA Technical Reports Server (NTRS)

    Steele, R. S.

    1984-01-01

    Fiber reinforced composites belong to a new class of materials and allow great flexibility in flywheel design. The most efficient flywheel may no longer have the classic Stodola taper and indeed, may not even be round. Some of the flywheel designs that have been developed in the past are discussed. Although choice of material, mounts and service requirements often dictate the final design choice for a particular application, the composite flywheels in this paper are classified within a geometric framework, a simple stress analysis of a circular disk is carried out.

  11. Hybridized polymer matrix composite

    NASA Technical Reports Server (NTRS)

    Stern, B. A.; Visser, T.

    1981-01-01

    Under certain conditions of combined fire and impact, graphite fibers are released to the atmosphere by graphite fiber composites. The retention of graphite fibers in these situations is investigated. Hybrid combinations of graphite tape and cloth, glass cloth, and resin additives are studied with resin systems. Polyimide resins form the most resistant composites and resins based on simple novolac epoxies the least resistant of those tested. Great improvement in the containment of the fibers is obtained in using graphite/glass hybrids, and nearly complete prevention of individual fiber release is made possible by the use of resin additives.

  12. High temperature composites

    NASA Technical Reports Server (NTRS)

    Nathal, M. V.

    1995-01-01

    The purpose of this paper is to review the current state of the development of new composite materials for advanced aircraft engines. The advantages and disadvantages of Ti-base, NiAl-base, and MoSi2-base composites as replacements for today's Ni-base superalloys are discussed from the standpoint of key technical issues, current status, and future directions. Results describing progress in both improved understanding of the mechanisms of deformation and fracture, and improved material performance will be covered.

  13. Damage Tolerance of Composites

    NASA Technical Reports Server (NTRS)

    Hodge, Andy

    2007-01-01

    Fracture control requirements have been developed to address damage tolerance of composites for manned space flight hardware. The requirements provide the framework for critical and noncritical hardware assessment and testing. The need for damage threat assessments, impact damage protection plans, and nondestructive evaluation are also addressed. Hardware intended to be damage tolerant have extensive coupon, sub-element, and full-scale testing requirements in-line with the Building Block Approach concept from the MIL-HDBK-17, Department of Defense Composite Materials Handbook.

  14. Composition for radiation shielding

    DOEpatents

    Kronberg, James W.

    1994-01-01

    A composition for use as a radiation shield. The shield has a depleted urum core for absorbing gamma rays and a bismuth coating for preventing chemical corrosion and absorbing gamma rays. Alternatively, a sheet of gadolinium may be positioned between the uranium core and the bismuth coating for absorbing neutrons. The composition is preferably in the form of a container for storing materials that emit radiation such as gamma rays and neutrons. The container is preferably formed by casting bismuth around a pre-formed uranium container having a gadolinium sheeting, and allowing the bismuth to cool. The resulting container is a structurally sound, corrosion-resistant, radiation-absorbing container.

  15. Composition for absorbing hydrogen

    DOEpatents

    Heung, Leung K.; Wicks, George G.; Enz, Glenn L.

    1995-01-01

    A hydrogen absorbing composition. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  16. Abrasion resistant composition

    DOEpatents

    Fischer, Keith D; Barnes, Christopher A; Henderson, Stephen L

    2014-05-13

    A surface covering composition of abrasion resistant character adapted for disposition in overlying bonded relation to a metal substrate. The surface covering composition includes metal carbide particles within a metal matrix at a packing factor of not less than about 0.6. Not less than about 40 percent by weight of the metal carbide particles are characterized by an effective diameter in the range of +14-32 mesh prior to introduction to the metal matrix. Not less than about 3 percent by weight of the metal carbide particles are characterized by an effective diameter of +60 mesh prior to introduction to the metal matrix.

  17. Liquid crystalline composites containing phyllosilicates

    DOEpatents

    Chaiko; David J.

    2007-05-08

    The present invention provides barrier films having reduced gas permeability for use in packaging and coating applications. The barrier films comprise an anisotropic liquid crystalline composite layer formed from phyllosilicate-polymer compositions. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while remaining transparent. Because of the ordering of the particles in the liquid crystalline composite, barrier films comprising liquid crystalline composites are particularly useful as barriers to gas transport.

  18. Traçage des apports anthropiques sur un petit bassin versant: utilisation des rapports isotopiques du strontium, des éléments majeurs et traces

    NASA Astrophysics Data System (ADS)

    Négrel, Philippe

    1997-06-01

    The chemical composition of river water is influenced by both the lithology of the basins drained by the river and anthropogenic influences (villages, salting of roads, agriculture, atmospheric pollution, etc.) along its banks. The fluxes of chemical elements were studied along a river valley stretching W-E from the headwaters of the various affluents to the outlet of the river. Strontium isotope differences enabled identification of potential sources (rocks, atmosphere, pollution).

  19. Douleurs et conflits : Approche comparative et implications pour la qualité des soins en fin de vie

    PubMed Central

    Mpinga, Emmanuel Kabengele; Verloo, Henk; Rapin, Charles-Henri; Chastonay, Philippe

    2009-01-01

    Le conflit serait-il à l’organisation ce que la douleur est à un organisme ? OBJECTIFS: Explorer les similitudes et les differences entre les douleurs et les conflits dans les contextes de soins de fin de vie. Mieux comprendre le rôle des conflits dans la qualité de ces soins. MÉTHODOLOGIE: Méthode comparative et réflexive autour des politiques de prise en charge des douleurs et des conflits dans les systèmes de soins. RÉSULTATS: Les conflits et les douleurs présentent de nombreuses similitudes de par leur identité, leur typologie, leur prévalence, leur fonction d’alerte, leurs coûts économiques et sociaux, le déni ou l’occultation qui les entourent et les obstacles à leur prise en charge adéquate. À l’inverse, des différences apparaissent dans la prise en charge des douleurs comparée à celle des conflits. Ces différences portent sur l’existence des programmes de prévention et de lutte sur les scènes nationale et internationale, la mise en œuvre des activités de recherche et de formation et la visibilité sociale. Pour les conflits, cette mise en œuvre n’existe pas encore. CONCLUSION: Les décideurs en clinique et en santé publique devraient intégrer les conflits comme un indicateur de la qualité des soins et élaborer des politiques pertinentes en matière de santé. PMID:19714268

  20. Use of DES Modeling for Determining Launch Availability for SLS

    NASA Technical Reports Server (NTRS)

    Staton, Eric; Cates, Grant; Finn, Ronald; Altino, Karen M.; Burns, K. Lee; Watson, Michael D.

    2014-01-01

    The National Aeronautics and Space Administration (NASA) is developing new capabilities for human and scientific exploration beyond Earth's orbit. This effort includes the Space Shuttle derived Space Launch System (SLS), the Orion Multi-Purpose Crew Vehicle (MPCV), and the Ground Systems Development and Operations (GSDO). There are several requirements and Technical Performance Measures (TPMs) that have been levied by the Exploration Systems Development (ESD) upon the SLS, Orion, and GSDO Programs including an integrated Launch Availability (LA) TPM. The LA TPM is used to drive into the SLS, Orion and GSDO designs a high confidence of successfully launching exploration missions that have narrow Earth departure windows. The LA TPM takes into consideration the reliability of the overall system (SLS, Orion and GSDO), natural environments, likelihood of a failure, and the time required to recover from an anomaly. A challenge with the LA TPM is the interrelationships between SLS, Orion, GSDO and the natural environments during launch countdown and launch delays that makes it impossible to develop an analytical solution for calculating the integrated launch probability. This paper provides an overview of how Discrete Event Simulation (DES) modeling was used to develop the LA TPM, how it was allocated down to the individual programs, and how the LA analysis is being used to inform and drive the SLS, Orion, and GSDO designs to ensure adequate launch availability for future human exploration.

  1. Use of DES Modeling for Determining Launch Availability for SLS

    NASA Technical Reports Server (NTRS)

    Watson, Mike; Staton, Eric; Cates, Grant; Finn, Ron; Altino, Karen; Burns, Lee

    2014-01-01

    The National Aeronautics and Space Administration (NASA) is developing new capabilities for human and scientific exploration beyond Earth's orbit. This effort includes the Space Shuttle derived Space Launch System (SLS), the Multi-Purpose Crew Vehicle (MPCV) "Orion", and the Ground Systems Development and Operations (GSDO). There are several requirements and Technical Performance Measures (TPMs) that have been levied by the Exploration Systems Development (ESD) upon the SLS, MPCV, and GSDO Programs including an integrated Launch Availability (LA) TPM. The LA TPM is used to drive into the SLS, Orion and GSDO designs a high confidence of successfully launching exploration missions that have narrow Earth departure windows. The LA TPM takes into consideration the reliability of the overall system (SLS, Orion and GSDO), natural environments, likelihood of a failure, and the time required to recover from an anomaly. A challenge with the LA TPM is the interrelationships between SLS, Orion, GSDO and the natural environments during launch countdown and launch delays that makes it impossible to develop an analytical solution for calculating the integrated launch probability. This paper provides an overview of how Discrete Event Simulation (DES) modeling was used to develop the LA TPM, how it was allocated down to the individual programs, and how the LA analysis is being used to inform and drive the SLS, Orion, and GSDO designs to ensure adequate launch availability for future human exploration.

  2. Cosmic Shear Measurements with DES Science Verification Data

    SciTech Connect

    Becker, M. R.

    2015-07-20

    We present measurements of weak gravitational lensing cosmic shear two-point statistics using Dark Energy Survey Science Verification data. We demonstrate that our results are robust to the choice of shear measurement pipeline, either ngmix or im3shape, and robust to the choice of two-point statistic, including both real and Fourier-space statistics. Our results pass a suite of null tests including tests for B-mode contamination and direct tests for any dependence of the two-point functions on a set of 16 observing conditions and galaxy properties, such as seeing, airmass, galaxy color, galaxy magnitude, etc. We use a large suite of simulations to compute the covariance matrix of the cosmic shear measurements and assign statistical significance to our null tests. We find that our covariance matrix is consistent with the halo model prediction, indicating that it has the appropriate level of halo sample variance. We also compare the same jackknife procedure applied to the data and the simulations in order to search for additional sources of noise not captured by the simulations. We find no statistically significant extra sources of noise in the data. The overall detection significance with tomography for our highest source density catalog is 9.7σ. Cosmological constraints from the measurements in this work are presented in a companion paper (DES et al. 2015).

  3. The Opportunity To Eradicate Peste des Petits Ruminants.

    PubMed

    Mariner, Jeffrey C; Jones, Bryony A; Rich, Karl M; Thevasagayam, Samuel; Anderson, John; Jeggo, Martyn; Cai, Yi; Peters, Andrew R; Roeder, Peter L

    2016-05-01

    Peste des petits ruminants (PPR) is a highly infectious disease of sheep and goats that is caused by PPR virus, a member of the genus Morbillivirus that includes the viruses that cause rinderpest (RP) in cattle. RP was the first animal disease to be globally eradicated in 2011 and is only the second disease, after smallpox, to have ever been eradicated. PPR is one of the principal constraints to small ruminant production in Africa, Asia, and the Middle East. The epidemiology of PPR and RP as well as the technologies available for their diagnosis and control are similar. The conditions that favored the eradication of RP are also largely present for PPR. In this work, we outline the evolving strategy for eradication in light of current opportunities and challenges, as well as the lessons from other eradication programs in animal and human health. The global PPR situation and technology for its control are summarized. A strategy based on the lessons from previous eradication efforts that integrate epidemiology, social science, and economics as tools to target and motivate vaccination is summarized. Major aspects of the cost and benefit-cost analysis of the indicated program are presented. The overall undiscounted cost of eradication was estimated as $3.1 billion, and the benefit-cost ratio for the most likely scenario was estimated at 33.8. We close with a discussion of the possible next steps. PMID:27183645

  4. Iberomaurusian funerary behaviour: evidence from Grotte des Pigeons, Taforalt, Morocco.

    PubMed

    Humphrey, Louise; Bello, Silvia M; Turner, Elaine; Bouzouggar, Abdeljalil; Barton, Nick

    2012-02-01

    Grotte des Pigeons at Taforalt, north-east Morocco, is well known for a large assemblage of Iberomaurusian (Epipalaeolithic) skeletons, possibly representing the earliest and most extensively used prehistoric cemetery in North Africa. New archaeological excavations carried out in 2005 and 2006 revealed further human remains in a largely undisturbed burial area in an alcove at the back of the cave. This discovery provides the first opportunity to report on Iberomaurusian human mortuary activity at this site. Reported here are a closely spaced and inter-cutting series of four burials. These contained the remains of four adults, of which three were buried in a seated or slightly reclining position facing towards the cave entrance and one was buried in a highly flexed position on its left side. The distribution of articulated and disarticulated bones suggested intensive use of the area, with earlier burials disturbed or truncated by subsequent burials, and displaced skeletal elements deliberately or unwittingly incorporated into later depositions. Through this process, parts of a single skeleton were redistributed among several discrete graves and within the surrounding deposit. Some aspects of the Iberomaurusian funerary tradition that are evident from the human remains excavated in the 1950s are absent in the newly excavated adult burials, suggesting a possible elaboration of funerary activity over time. PMID:22154088

  5. Plaies des membres par agression: analyse de 245 dossiers

    PubMed Central

    Boufettal, Monsef; Mahfoud, Mustapha; Ismael, Farid; Kharmaz, Mohamed; Bardouni, Ahmed El; Berrada, Mohamed Saleh; Yaacoubi, Moradh El

    2015-01-01

    Il s'agit d'une étuderétrospective, analytique, monocentrique rentrant dans le cadre d'une étude épidémiologique s’étalant sur une période de trois années (de 2010 à 2012) durant laquelle nous avons revu les dossiers de 245 patients victimes de violence et d'agression. Nous avons exclu les lésions simples traitées en ambulatoire. Par conséquent, nous nous sommes limités aux cas de blessures ayant nécessité une prise en charge spécialisée au bloc opératoire. Les objectifs de notre travail étaient de connaitre la fréquence des agressions au service de traumatologie du CHU de Rabat, classer les différents types de lésions, évaluer leur gravité, mettre la lumière sur les populations les plus touchées et enfin montrer les différentes modalités de prise en charge thérapeutiques. PMID:26918078

  6. TOXAPHENE COMPOSITION AND TOXICOLOGY

    EPA Science Inventory

    The composition and metabolism of Toxaphene have been examined to aid in understanding the conditions under which this insecticide can be most effectively and safely used. Each of 8 Toxaphene samples manufactured by Hercules Chemical Co. from 1949 to 1975 shows the same 29 major ...

  7. LITERATURE SPARKS COMPOSITION.

    ERIC Educational Resources Information Center

    MANDLEBAUM, NAOMI

    LITERATURE, BEING READILY AVAILABLE AS PART OF THE CURRICULUM, IS A VALUABLE TOOL FOR INSTRUCTING STUDENTS IN COMPOSITION. THE USE OF LITERATURE CAN STIMULATE DISCUSSIONS AND EFFECTIVE WRITING AMONG STUDENTS OF VARIOUS GRADE AND ABILITY LEVELS. INTEREST IS GENERATED BY KEEPING THE CLASSWORK RELEVANT TO THE LIVES OF THE STUDENTS, AND THINKING IS…

  8. Composites Damage Tolerance

    NASA Technical Reports Server (NTRS)

    Gregg, Wayne

    2008-01-01

    This slide presentation reviews the development of MSFC-RQMT-3479 for requirements for fracture control of composites to be used in the Constellation program. This effort is part of the development of a revision of NASA-STD-5019(A), which will include MSFC-RQMT-3479. Examples of the requirement criteria and implementation are given.

  9. Futurism: Framework for Composition.

    ERIC Educational Resources Information Center

    Keroack, Elizabeth Carros; Marquis, Leah Keating

    Noting that the study of the future has been neglected within the language arts framework, this paper proposes a curriculum unit that uses such study as a vehicle to develop composition skills. The paper provides the following information: the general objectives of the unit; evaluation methods; general humanistic themes to be studied; materials;…

  10. English 200: Intermediate Composition

    ERIC Educational Resources Information Center

    Ritter, Kelly

    2005-01-01

    "English 200: Intermediate Composition" is a program elective for English majors and a writing-intensive elective for nonmajors at Southern Connecticut State University (SCSU), a comprehensive institution of 11,000 undergraduate and graduate (master's level) students. English 200 is described in the departmental course catalog as a course "in…

  11. TEACHING COMPOSITION WITH FILM.

    ERIC Educational Resources Information Center

    COURSEN, HERBERT R., JR.

    A COMPOSITION PROGRAM DESIGNED TO GIVE UPWARD BOUND STUDENTS A FEELING OF SUCCESS WAS BASED ON FILMS WHICH THE STUDENTS VIEWED, DISCUSSED, AND WROTE ABOUT. THE FILMS FELL ROUGHLY INTO THE CATEGORIES OF SOCIAL PROBLEMS, POLITICS AND PROPAGANDA, AND ART AND MUSIC. FOLLOWING CLASS DISCUSSIONS, STUDENTS WERE REQUIRED MERELY TO "WRITE ABOUT THE FILM."…

  12. Composite material dosimeters

    DOEpatents

    Miller, Steven D.

    1996-01-01

    The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

  13. Underwater Scene Composition

    ERIC Educational Resources Information Center

    Kim, Nanyoung

    2009-01-01

    In this article, the author describes an underwater scene composition for elementary-education majors. This project deals with watercolor with crayon or oil-pastel resist (medium); the beauty of nature represented by fish in the underwater scene (theme); texture and pattern (design elements); drawing simple forms (drawing skill); and composition…

  14. Wood Composite Adhesives

    NASA Astrophysics Data System (ADS)

    Gomez-Bueso, Jose; Haupt, Robert

    The global environment, in which phenolic resins are being used for wood composite manufacture, has changed significantly during the last decade. This chapter reviews trends that are driving the use and consumption of phenolic resins around the world. The review begins with recent data on volume usage and regional trends, followed by an analysis of factors affecting global markets. In a section on environmental factors, the impact of recent formaldehyde emission regulations is discussed. The section on economics introduces wood composite production as it relates to the available adhesive systems, with special emphasis on the technical requirement to improve phenolic reactivity. Advances in composite process technology are introduced, especially in regard to the increased demands the improvements place upon adhesive system performance. The specific requirements for the various wood composite families are considered in the context of adhesive performance needs. The results of research into current chemistries are discussed, with a review of recent findings regarding the mechanisms of phenolic condensation and acceleration. Also, the work regarding alternate natural materials, such as carbohydrates, lignins, tannins, and proteinaceous materials, is presented. Finally, new developments in alternative adhesive technologies are reported.

  15. Gasoline Composition in 2008

    EPA Science Inventory

    Gasoline composition in the U.S is determined by factors related to crude oil source, refinery capacity, geography and regulatory factors. Major regulation derived from the Clean Air Act and its amendments determines the benzene and former oxygenate requirements for reformulated...

  16. Composite Load Model Evaluation

    SciTech Connect

    Lu, Ning; Qiao, Hong

    2007-09-30

    The WECC load modeling task force has dedicated its effort in the past few years to develop a composite load model that can represent behaviors of different end-user components. The modeling structure of the composite load model is recommended by the WECC load modeling task force. GE Energy has implemented this composite load model with a new function CMPLDW in its power system simulation software package, PSLF. For the last several years, Bonneville Power Administration (BPA) has taken the lead and collaborated with GE Energy to develop the new composite load model. Pacific Northwest National Laboratory (PNNL) and BPA joint force and conducted the evaluation of the CMPLDW and test its parameter settings to make sure that: • the model initializes properly, • all the parameter settings are functioning, and • the simulation results are as expected. The PNNL effort focused on testing the CMPLDW in a 4-bus system. An exhaustive testing on each parameter setting has been performed to guarantee each setting works. This report is a summary of the PNNL testing results and conclusions.

  17. Incombustible resin composition

    NASA Technical Reports Server (NTRS)

    Akima, T.

    1982-01-01

    Incombustible resin compositions composed of aromatic compounds were obtained through (1) combustion polymer material and (2) bisphenol A or halogenated bisphenol A and bisphenol A diglycidl ether or halogenated bisphenol A diglycidyl ether. The aromatic compound is an adduct of bifunctional phenols and bifunctional epoxy resins.

  18. Composite Tank Technologies Development

    NASA Technical Reports Server (NTRS)

    DeLay, Tom

    2005-01-01

    The need for cryogenic fuel tanks continues to expand, and research at NASA Marshall Space Flight Center (MSFC) is addressing these needs. This viewgraph presentation provides an overview of composite tank development, including tank testing, cryogenic materials research, tank liners, and dual-walled tanks, at MSFC.

  19. -SiC Composites

    NASA Astrophysics Data System (ADS)

    Chakraborty, Shirshendu; Debnath, Debashish; Mallick, Azizur Rahaman; Das, Probal Kumar

    2014-12-01

    ZrB2-SiC composites were hot pressed at 2473 K (2200 °C) with graded amounts (5 to 20 wt pct) of SiC and the effect of the SiC addition on mechanical properties like hardness, fracture toughness, scratch and wear resistances, and thermal conductivity were studied. Addition of submicron-sized SiC particles in ZrB2 matrices enhanced mechanical properties like hardness (15.6 to 19.1 GPa at 1 kgf), fracture toughness (2 to 3.6 MPa(m)1/2) by second phase dispersion toughening mechanism, and also improved scratch and wear resistances. Thermal conductivity of ZrB2-SiC (5 wt pct) composite was higher [121 to 93 W/m K from 373 K to 1273 K (100 °C to 1000 °C)] and decreased slowly upto 1273 K (1000 °C) in comparison to monolithic ZrB2 providing better resistance to thermal fluctuation of the composite and improved service life in UHTC applications. At higher loading of SiC (15 wt pct and above), increased thermal barrier at the grain boundaries probably reduced the thermal conductivity of the composite.

  20. Stabalized radiopharmaceutical compositions

    SciTech Connect

    Charleson, F.P.

    1989-11-14

    This patent describes a stabilized radiopharmaceutial composition. It comprises: a molecule containing a radioactive iodine atom and a stabilize, selected from the group consisting of ascorbic acid, nicotinamide and its corresponding amides, or a mixture of ascorbic acid and nicotinamide and its amides, in a sufficient amount to stabilize against radiolytic decomposition.

  1. ETS's English Composition Test.

    ERIC Educational Resources Information Center

    Ball, Donald L.

    1970-01-01

    An analysis of the kinds of sentences used by students in sample ETS English Composition Test essays, and a survey of some of the actual weaknesses of these papers (e.g., shifting subjects, use of incorrect idiom, and inaccurate or incorrect word choices or usages) point to real gaps in student writing skills. Elements found in good papers (e.g.,…

  2. Emotional Subjects for Composition.

    ERIC Educational Resources Information Center

    Micciche, Laura R.

    Metaphors such as "gypsy academics,""freeway flyers," and "contingent laborers," ascribed by compositionists to their work and its conditions, comment on the low status of composition specialists and teachers in academic hierarchies. Work is the activity around which a profession forms, and, as such, it produces emotional dispositions compatible…

  3. Composite dielectric waveguides

    NASA Astrophysics Data System (ADS)

    Yamashita, E.; Atsuki, K.; Kuzuya, R.

    1980-09-01

    The modal analysis of a composite circular dielectric waveguide (CCDW) is presented. Computed values of the propagation constant of a CCDW are compared with those of the homogeneous circular dielectric waveguides (HCDW). Microwave experiments concerning the propagation constant of a CCDW of Teflon and Rexolite are described.

  4. Fatigue in Composite Materials

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The deformation and failure behavior of graphite/epoxy tubes under biaxial loading was investigated. The increase of basic understanding of and provide design information for the bi-axial response of graphite/epoxy composites to fatigue loads are considered.

  5. Hybrid composite laminate structures

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Lark, R. F. (Inventor)

    1977-01-01

    An invention which relates to laminate structures and specifically to essentially anisotropic fiber composite laminates is described. Metal foils are selectively disposed within the laminate to produce increased resistance to high velocity impact, fracture, surface erosion, and other stresses within the laminate.

  6. NUCLEAR FUEL COMPOSITION

    DOEpatents

    Spedding, F.H.; Wilhelm, H.A.

    1960-05-31

    A novel reactor composition for use in a self-sustaining fast nuclear reactor is described. More particularly, a fuel alloy comprising thorium and uranium-235 is de scribed, the uranium-235 existing in approximately the same amount that it is found in natural uranium, i.e., 1.4%.

  7. Scale, Composition, and Technology

    ERIC Educational Resources Information Center

    Victor, Peter A.

    2009-01-01

    Scale (gross domestic product), composition (goods and services), and technology (impacts per unit of goods and services) in combination are the proximate determinants in an economy of the resources used, wastes generated, and land transformed. In this article, we examine relationships among these determinants to understand better the contribution…

  8. High strength composites evaluation

    SciTech Connect

    Marten, S.M.

    1992-02-01

    A high-strength, thick-section, graphite/epoxy composite was identified. The purpose of this development effort was to evaluate candidate materials and provide LANL with engineering properties. Eight candidate materials (Samples 1000, 1100, 1200, 1300, 1400, 1500, 1600, and 1700) were chosen for evaluation. The Sample 1700 thermoplastic material was the strongest overall.

  9. Middle East Composite

    Atmospheric Science Data Center

    2013-04-16

    ... Because the individual orbit swaths are only 400 kilometers wide, they were "mosaicked" together to form this composite picture, which ... the Dead Sea, one of the saltiest inland water bodies in the world. At its northern edge is Qumran, where the ancient Scrolls were ...

  10. Grain structure and composition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Chapter 4 covers general information about structure and composition of cereal grains as well as the unique features of each cereal grain. Cereal grains are the fruits of cultivated grasses and members of Gramineae family. The fruit of a cereal is botanically known as caryopsis, featured by fusion...

  11. Development of polysilsesquioxane composites

    NASA Technical Reports Server (NTRS)

    Srinivasan, K.; Tiwari, S. N.

    1990-01-01

    Polymer composites are increasingly being required to operate for prolonged durations at higher temperatures than in the past. Hence there have been increased efforts devoted to synthesizing and characterizing polymers capable of withstanding temperatures greater than 300 C for long periods. Several such organic polymers have been investigated in recent times. This research effort seeks to enquire if inorganic polymers can be utilized to provide the same result. Ceramics have long been recognized as providing superior thermal properties for demanding applications. However, the extremely high softening temperatures preclude their being shaped into complex shapes through melt processing techniques common to organic polymers. One approach towards solving this problem has been through the development of preceramic polymers. These are capable of being processed in the polymeric state with ease, and subsequently being pyrolyzed to ceramic structures. This experimental study is aimed at studying the feasibility of using preceramic polymers (that have not been subject to the pyrolysis step) as high performance composite matrices for high temperature applications. A preliminary study of this nature is not geared towards optimizing mechanical properties suitable for such composites. Rather, this study attempts to process such resins in composite form and suitably characterize their properties.

  12. Geographic origins and compositions of virgin olive oils determinated by chemometric analysis of NIR spectra.

    PubMed

    Galtier, O; Dupuy, N; Le Dréau, Y; Ollivier, D; Pinatel, C; Kister, J; Artaud, J

    2007-07-01

    The authentication of virgin olive oil samples requires usually the use of sophisticated and time consuming analytical techniques. There is a need for fast and simple analytical techniques for the objective of a quality control methodology. Virgin olive oils present characteristic NIR spectra. Chemometric treatment of NIR spectra was assessed for the quantification of fatty acids and triacylglycerols in virgin olive oil samples (n=125) and for their classification (PLS1-DA) into five very geographically closed registered designations of origin (RDOs) of French virgin olive oils ("Aix-en-Provence", "Haute-Provence", "Nice", "Nyons" and "Vallée des Baux"). The spectroscopic interpretation of regression vectors showed that each RDO was correlated to one or two specific components of virgin olive oils according to their cultivar compositions. The results were quite satisfactory, in spite of the similarity of cultivar compositions between two denominations of origin ("Aix-en-Provence" and "Vallée des Baux"). Chemometric treatments of NIR spectra allow us to obtain similar results than those obtained by time consuming analytical techniques such as GC and HPLC, and constitute a help fast and robust for authentication of those French virgin olive oils. PMID:17605993

  13. Le Point sur la Pharmacologie des Agents Anesthesiques Chez le Brule Grave

    PubMed Central

    Siah, S.; Ababou, K.; Benziane, H.; El Jaoudi; Bensghir, M.; Bakali, H.; El Wali, A.; Ihrai, I.; Drissi, N.K.

    2008-01-01

    Summary La pharmacologie des agents anesthésiques chez le brûlé est variable et imprévisible. Dans les premières 48 h, il y a une hypovolémie avec chute du débit cardiaque et des fuites plasmatiques. Après 48 h, il y a une hypervolémie avec augmentation du débit cardiaque, hypermétabolisme et la clearance des médicaments est augmentée. Parmi les facteurs de déséquilibre, on retrouve les variations des protéines plasmatiques. Deux protéines sont importantes chez le brûlé grave : l'albumine et l'alpha 1- glycoprotéine. Leur taux varie beaucoup au cours de l'évolution de la brûlure. Les agents anesthésiques dont la liaison avec ces deux protéines est prédominante verront leur pharmacocinétique modifiée. L'anesthésiste-réanimateur du service des brûlés va maîtriser ces notions pharmacologiques pour utiliser à bon escient les agents anesthésiques. PMID:21991108

  14. Progressive Fracture of Composite Structures

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.; Minnetyan, Levon

    2008-01-01

    A new approach is described for evaluating fracture in composite structures. This approach is independent of classical fracture mechanics parameters like fracture toughness. It relies on computational simulation and is programmed in a stand-alone integrated computer code. It is multiscale, multifunctional because it includes composite mechanics for the composite behavior and finite element analysis for predicting the structural response. It contains seven modules; layered composite mechanics (micro, macro, laminate), finite element, updating scheme, local fracture, global fracture, stress based failure modes, and fracture progression. The computer code is called CODSTRAN (Composite Durability Structural ANalysis). It is used in the present paper to evaluate the global fracture of four composite shell problems and one composite built-up structure. Results show that the composite shells and the built-up composite structure global fracture are enhanced when internal pressure is combined with shear loads.

  15. Manufacturing tailored property ceramic composites

    SciTech Connect

    Ewsuk, K.G.; Harrison, L.W.

    1994-11-14

    Composite materials are desirable for many advanced engineering applications where the properties of a single phase material cannot meet all of the service requirements; however, existing process technology has limited the development and commercialization of composites. Lack of reproducible sintering to high density is one of the major obstacles to commercializing ceramic composites. Final-stage, non-reactive liquid phase sintering (NLPS) theory provides metrics for sinterability that can be used as guidelines to design and manufacture dense ceramic-filled-glass (CFG) composites. Additionally, within the constraints defined by the NLPS theory, sum-property models can be used to predict CFG composite properties, and to design composites with properties tailored to specific applications. By integrating composite process models with composite property models, processable, application-tailored CFG composites for microelectronics packaging have been designed and fabricated.

  16. Contrôle du marché informel à l’heure de la mondialisation des échanges. Le cas des antirétroviraux au Chili

    PubMed Central

    Brousselle, Astrid; Morales, Cristián

    2013-01-01

    Résumé Les nouveaux médicaments pour le VIH/sida ont créé des besoins d’accessibilité aux traitements que les gouvernements n’ont pas toujours réussi à couvrir. Il en résulte l’émergence d’un marché informel des ARV. Par l’analyse de la situation au Chili, nous traitons des différents créneaux d’approvisionnement, des conséquences de l’existence d’un tel marché, ainsi que des moyens envisageables pour réduire les effets indésirables. Les aspects tant microéconomiques que macroéconomiques concernant le marché et l’accessibilité aux médicaments sont abordés. PMID:23997580

  17. Delineation of flooding within the upper Mississippi River Basin-flood of June 18 through August 4, 1993, in Des Moines and vicinity, Iowa

    USGS Publications Warehouse

    Schaap, Bryan D.

    1996-01-01

    This hydrologic investigations atlas shows the areas in and near Des Moines, Iowa, that were flooded by the Des Moines and the Raccoon Rivers and Walnut, Fourmile, and Beaver Creeks from June 18 through August 4, 1993. This map also depicts the Federal Emergency Management Agency 100-year flood boundaries. The area drained by the Des Moines River upstream from Des Moines received more than 100 percent of normal rainfall in May, June, and July, 1993. At Boone, which is located about 35 miles north-northeast of Des Moines, July rainfall was 424 percent of normal. The discharges at streamflow- gaging stations on the Des Moines River near Stratford, downstream from Saylorville Lake, and at Des Moines are shown. The cumulative discharge for inflow-gaging stations in the Des Moines area and discharge for the Des Moines River below the Raccoon River at Des Moines from July 8 through 21, 1993, are shown. The water-surface elevations of Saylorville Lake from June 18 through August 4, 1993, are shown. Profiles of the maximum water- surface elevations of the Des Moines and Raccoon Rivers during the 1993 flood in Des Moines and vicinity are higher than the respective Federal Emergency Management Agency 100- and 500-year flood profiles.

  18. 77 FR 65478 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan including Des Plaines River, Chicago...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-29

    ... including Des Plaines River, Chicago Sanitary and Ship Canal, Chicago River, and Calumet-Saganashkee Channel... Des Plaines River, Chicago Sanitary and Ship Canal, Chicago River, Calumet-Saganashkee Channel on all waters of the Chicago Sanitary and Ship Canal from Mile Marker 296.1 to Mile Marker 296.7 at...

  19. Les transfusions de globules rouges chez le nouveau-né : Des directives révisées

    PubMed Central

    2002-01-01

    En général, depuis dix ans, les professionnels de la santé qui soignent des nouveau-nés à haut risque dans des unités de soins intensifs néonatals sont plus restrictifs dans leur utilisation de transfusions de globules rouges. Le présent énoncé est conçu pour ceux qui soignent des nouveau-nés à haut risque (des prématurés aux nouveau-nés d’un mois). Il vise à fournir des directives pour réduire l’incidence d’anémie chez les nourrissons prématurés et à terme, à repérer des stratégies pour réduire le besoin de transfusions de globules rouges et à limiter l’exposition à des donneurs au sein de cette population. Des recommandations portant sur les transfusions de globules rouges sont incluses.

  20. Downtown Elementary School (DES): The Unique School That Juxtaposes Both Magnet and Professional Development School (PDS) Programs

    ERIC Educational Resources Information Center

    Alenuma, Sidonia

    2009-01-01

    The objective of this paper is to explore the operation of magnet and professional development school (PDS) programs in a real life situation using an ethnographic study of Downtown Elementary School (DES--a pseudonym) that simultaneously operates as a PDS and a magnet school. The author spent almost three years at DES, located in the Southern…

  1. 77 FR 30273 - DES Wholesale, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission DES Wholesale, LLC; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding of DES Wholesale, LLC's application for market-based rate authority, with...

  2. 33 CFR 165.930 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan including Des Plaines River, Chicago...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and Dam to Lake Michigan including Des Plaines River, Chicago Sanitary and Ship Canal, Chicago River... River, Chicago Sanitary and Ship Canal, Chicago River, and Calumet-Saganashkee Channel, Chicago, IL. (a... (point at which the Des Plaines River connects with the Chicago Sanitary and Ship Canal). (2)......

  3. Activation of the bacterial thermosensor DesK involves a serine zipper dimerization motif that is modulated by bilayer thickness.

    PubMed

    Cybulski, Larisa Estefanía; Ballering, Joost; Moussatova, Anastassiia; Inda, Maria Eugenia; Vazquez, Daniela B; Wassenaar, Tsjerk A; de Mendoza, Diego; Tieleman, D Peter; Killian, J Antoinette

    2015-05-19

    DesK is a bacterial thermosensor protein involved in maintaining membrane fluidity in response to changes in environmental temperature. Most likely, the protein is activated by changes in membrane thickness, but the molecular mechanism of sensing and signaling is still poorly understood. Here we aimed to elucidate the mode of action of DesK by studying the so-called "minimal sensor DesK" (MS-DesK), in which sensing and signaling are captured in a single transmembrane segment. This simplified version of the sensor allows investigation of membrane thickness-dependent protein-lipid interactions simply by using synthetic peptides, corresponding to the membrane-spanning parts of functional and nonfunctional mutants of MS-DesK incorporated in lipid bilayers with varying thicknesses. The lipid-dependent behavior of the peptides was investigated by circular dichroism, tryptophan fluorescence, and molecular modeling. These experiments were complemented with in vivo functional studies on MS-DesK mutants. Based on the results, we constructed a model that suggests a new mechanism for sensing in which the protein is present as a dimer and responds to an increase in bilayer thickness by membrane incorporation of a C-terminal hydrophilic motif. This results in exposure of three serines on the same side of the transmembrane helices of MS-DesK, triggering a switching of the dimerization interface to allow the formation of a serine zipper. The final result is activation of the kinase state of MS-DesK. PMID:25941408

  4. 77 FR 20295 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan including Des Plaines River, Chicago...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-04

    ... SECURITY Coast Guard 33 CFR Part 165 Safety Zone, Brandon Road Lock and Dam to Lake Michigan including Des... will enforce a segment of the Safety Zone; Brandon Road Lock and Dam to Lake Michigan including Des... . SUPPLEMENTARY INFORMATION: The Coast Guard will enforce a segment of the Safety Zone; Brandon Road Lock and...

  5. Precursor composites for oxygen dispersion hardened silver sheathed superconductor composites

    DOEpatents

    Podtburg, E.R.

    1999-06-22

    An oxide superconductor composite having improved texture and durability is disclosed. The oxide superconductor composite includes an oxide superconductor phase substantially surrounded with/by a noble metal matrix, the noble metal matrix comprising a metal oxide in an amount effective to form metal oxide domains that increase hardness of the composite. The composite is characterized by a degree of texture at least 10% greater than a comparable oxide superconductor composite lacking metal oxide domains. An oxide superconducting composite may be prepared by oxidizing the precursor composite under conditions effective to form solute metal oxide domains within the silver matrix and to form a precursor oxide in the precursor alloy phase; subjecting the oxidized composite to a softening anneal under conditions effective to relieve stress within the noble metal phase; and converting the oxide precursor into an oxide superconductor. 1 fig.

  6. Precursor composites for oxygen dispersion hardened silver sheathed superconductor composites

    DOEpatents

    Podtburg, Eric R.

    1999-01-01

    An oxide superconductor composite having improved texture and durability. The oxide superconductor composite includes an oxide superconductor phase substantially surrounded with/by a noble metal matrix, the noble metal matrix comprising a metal oxide in an amount effective to form metal oxide domains that increase hardness of the composite. The composite is characterized by a degree of texture at least 10% greater than a comparable oxide superconductor composite lacking metal oxide domains. An oxide superconducting composite may be prepared by oxidizing the precursor composite under conditions effective to form solute metal oxide domains within the silver matrix and to form a precursor oxide in the precursor alloy phase; subjecting the oxidized composite to a softening anneal under conditions effective to relieve stress within the noble metal phase; and converting the oxide precursor into an oxide superconductor.

  7. Impetus of composite mechanics on test methods for fiber composites

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1978-01-01

    Significant contributions of the three major areas of composite mechanics to the development of test methods are illustrated with selected examples. The areas of composite mechanics include composite micromechanics, composite macromechanics, and laminate theory. The examples can be considered to be representative of the contribution of composite mechanics to the development of composite test methods. The specific examples describe contributions such as criteria for selecting resin matrices for improved composite strength, the 10 deg off-axis tensile test, procedures for configuring hybrids, and the concept of 'reduced bending rigidities'. The pertinent composite mechanics equations associated with each contribution are given and supplemented by tabular and/or graphical data which illustrate the significance of the contribution.

  8. Giant magnetostrictive composites

    NASA Astrophysics Data System (ADS)

    Duenas, Terrisa Ann

    The limitation of magnetostrictive composites has been in their low magnetostrictive response when compared to their monolithic counterparts. In this dissertation research is presented describing the methods and analysis used to create a giant magnetostrictive composite (GMC) producing giant strains at low fields, exhibiting magnetization ``jumping'' and the ΔE effect. This composite combines the giant magnetostrictive material, Terfenol-D (Tb0.3Dy0.7Fe2) in particle form, with a nonmetallic binder and is capable of producing strains (at room temperature) exceeding 1000 ppm at a nominal field of 1.5 kOe mechanically unloaded and 1200 ppm at 8 MPa preload (2.5 kOe). Several studies leading to the high response of this composite are presented. A connectivity study shows that a [1-3] connected composite produces 50% more strain than a [0-3] composite. A resin study indicates that the lower the viscosity of the resin, the greater the magnetostrictive response; this is attributed to the removal of voids during degassing. A void study correlates the increase in voids to the decrease in strain response. A model is used to correlate analysis with experimental results within 10% accuracy and shows that an optimal volume fraction exists based on the properties of the binder. Using a Polyscience Spurr low- viscosity (60 cps) binder this volume fraction is nominally 20%; this optimum is attributed to the balance of epoxy contracting on the particle (built-in preload) and the actuation delivered by the magnetostrictive material. In addition to the connectivity, resin, void, and volume-fraction study, particle size and gradation studies are presented. Widely dispersed (<106, <212, <300 μm), narrowly dispersed (<45, (90-106), (275-300) μm), and an optimized bimodal (18.7% of (45-90) μm with 81.3% of (250-300) μm) particle distributions are studied. Results show that the larger the particle size, the higher the magnetostrictive response; this is attributed to the reduction of

  9. Approche à l’égard des nouveaux anticoagulants oraux en pratique familiale

    PubMed Central

    Douketis, James; Bell, Alan David; Eikelboom, John; Liew, Aaron

    2014-01-01

    Résumé Objectif Traiter des différentes éventualités pouvant survenir durant le suivi clinique et la prise en charge prolongés des patients prenant de nouveaux anticoagulants oraux (NACO). Qualité des données Aux fins de cette révision narrative (non systématique), nous avons effectué une recherche dans la base de données PubMed afin de relever des études cliniques récentes (soit de janvier 2008 à la semaine 32 de 2013) portant sur l’emploi des NACO pour la prévention des AVC dans les cas de fibrillation auriculaire et le traitement de la thromboembolie veineuse aiguë. Nous avons utilisé cette base de données probantes pour répondre à nos questions prédéfinies ayant trait à l’emploi des NACO en pratique générale. Message principal Le dabigatran et le rivaroxaban doivent être pris avec les repas afin de limiter la dyspepsie et de favoriser l’absorption, respectivement. Aucun NACO n’est accompagné de restrictions alimentaires, à l’exception de la consommation modérée d’alcool, et le rivaroxaban et l’apixaban peuvent être écrasés, au besoin. Les antiacides ne semblent pas perturber l’efficacité des NACO. Comme c’est le cas avec la warfarine, les patients traités aux NACO doivent éviter l’emploi prolongé d’anti-inflammatoires non stéroïdiens et d’antiplaquettaires. Chez les patients devant subir une chirurgie, il faut interrompre la prise de NACO de 2 à 5 jours avant l’intervention, en fonction du risque de saignement, et le traitement par le NACO doit être habituellement repris au moins 24 heures après la chirurgie. Il n’est habituellement pas nécessaire d’effectuer un test préopératoire de coagulation. Chez les patients qui développent un saignement, un saignement mineur ne justifie habituellement pas un test de laboratoire ni l’interruption du traitement par le NACO; dans le cas des saignements majeurs, il faut se concentrer sur l’application de mesures localisées visant à endiguer le

  10. N-to-One-Provisionierung zwischen internen Satellitenverzeichnissen des IntegraTUM-Metadirectory

    NASA Astrophysics Data System (ADS)

    Boursas, Latifa

    Dieser Beitrag beschreibt und analysiert die Synchronisationslösungen zur Verwaltung von Benutzerdaten, die Konnektoren aus verschiedenen Quellsystemen und zwischen Verzeichnisdiensten übertragen müssen. Der Schwerpunkt dieser Analyse liegt dabei auf den Transformationen, die zwei Datenmodelle mit unterschiedlichen Strukturen des Directory Information Tree (DIT) innerhalb des IntegraTUM-Metadirectory miteinander abgleichen. Besonders herausfordernd ist, diesen Abgleich mittels des Novell DirXML-Treibers zu realisieren, weil das DirXML-Datenmodell für die Synchronisation der LDAP-Objekte auf eins zu eins Synchronisation ausgelegt ist. In diesem Beitrag wird unsere Lösung für die Synchronisation mehreren LDAP-Objekte auf ein einziges Objekt detailliert und ihre Integrierbarkeit in anderen Hochschulen vorgestellt.

  11. Water-surface profiles of Raccoon River at Des Moines, Iowa

    USGS Publications Warehouse

    Carpenter, Philip J.; Appel, David H.

    1966-01-01

    The Raccoon River., having a drainage area of 3,630 square miles, borders the south edge of the Des Moines downtown business district before flowing into the Des Moines River at mile 201.6. A large residential area and the city airport are separated from downtown Des Moines by the Raccoon River (fig. 1). Five highway bridges and one railroad bridge span the river between the mouth and mile 205.75, the limits of this report (fig. 1). The river is confined to a narrow channel from the mouth to the Chicago, Burlington, and Quincy Railroad bridge (mile 202.6); upstream of this bridge the river is not confined and during high water spreads over a wide flood plain. Fleur Drive, a principal traffic artery to the downtown area, is the only roadway of the five that crosses this wide flood plain. It has been flooded 15 times during the period 1903, 1918-1965.

  12. Ultrasound and deep eutectic solvent (DES): a novel blend of techniques for rapid and energy efficient synthesis of oxazoles.

    PubMed

    Singh, Balvant S; Lobo, Hyacintha R; Pinjari, Dipak V; Jarag, Krishna J; Pandit, Aniruddha B; Shankarling, Ganapati S

    2013-01-01

    The present work deals with the synthesis of novel oxazole compounds by using effective combination of ultrasound (US) and deep eutectic solvent (DES). The reaction was also conducted by thermal method (NUS) and the comparative studies are provided. It was observed that applying ultrasound not only improved yields and reduced reaction times but also saved more than 85% energy as shown by energy consumption calculations. The advantages of using DES as reaction medium is highlighted from the fact that it is bio-degradable, non-toxic, recyclable and could be easily prepared using inexpensive raw materials. The recyclability for DES was studied wherein it was found that ultrasound has no negative effects on DES even up to four runs. In addition, the present work is the first report on the combinative use of DES and US in organic synthesis. PMID:22784641

  13. Negative electrode composition

    DOEpatents

    Kaun, Thomas D.; Chilenskas, Albert A.

    1982-01-01

    A secondary electrochemical cell and a negative electrode composition for use therewith comprising a positive electrode containing an active material of a chalcogen or a transiton metal chalcogenide, a negative electrode containing a lithium-aluminum alloy and an amount of a ternary alloy sufficient to provide at least about 5 percent overcharge capacity relative to a negative electrode solely of the lithium-aluminum alloy, the ternary alloy comprising lithium, aluminum, and iron or cobalt, and an electrolyte containing lithium ions in contact with both of the positive and the negative electrodes. The ternary alloy is present in the electrode in the range of from about 5 percent to about 50 percent by weight of the electrode composition and may include lithium-aluminum-nickel alloy in combination with either the ternary iron or cobalt alloys. A plurality of series connected cells having overcharge capacity can be equalized on the discharge side without expensive electrical equipment.

  14. Radiation shielding composition

    DOEpatents

    Quapp, William J.; Lessing, Paul A.

    1998-01-01

    A composition for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm.sup.3 and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile.

  15. Radiation shielding composition

    DOEpatents

    Quapp, William J.; Lessing, Paul A.

    2000-12-26

    A composition for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm.sup.3 and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile.

  16. Radiation shielding composition

    DOEpatents

    Quapp, W.J.; Lessing, P.A.

    1998-07-28

    A composition is disclosed for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm{sup 3} and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile. 5 figs.

  17. The composition of comets

    NASA Technical Reports Server (NTRS)

    Jessberger, E. K.; Kissel, J.; Rahe, J.

    1989-01-01

    The present discussion of recent studies concerning cometary composition gives attention to the results obtained by in situ measurements of Comet Halley's dust composition by Vega 1's impact mass spectrometer, which discovered a mineral fraction that appears to be CI chondritic, as well as an organic fraction consisting of highly unsaturated hydrocarbons. The mineral fraction of comets appears to form a core that is embedded in essentially organic material; the spectroscopic invisibility of carbon is due to its presence in the cometary dust. The mass of most dust particles is found to be in the 10 to the -12th to 10 to the -14th g range. A considerable fraction of the dust grains serves as an extended source of gas in the inner coma.

  18. Metal Matrix Composites

    SciTech Connect

    Hunt, Warren; Herling, Darrell R.

    2004-02-01

    Metal matrix composites have found selected application in areas that can cost-effectively capitalize on improvements in specific stiffness, specific strength, fatigue resistance, wear resistance, and coefficient of thermal expansion. Metal matrix composites comprise a relatively wide range of materials defined by the metal matrix, reinforcement type, and reinforcement geometry. In the area of the matrix, most metallic systems have been explored, including aluminum, beryllium, magnesium, titanium, iron, nickel, cobalt, and silver. However, aluminum is by far the most preferred. For reinforcements, the materials are typically ceramics, which provide a very beneficial combination of stiffness, strength, and relatively low density. Candidate reinforcement materials include SiC, Al2O3, B4C, TiC, TiB2, graphite, and a number of other ceramics. In addition, metallic materials such as tungsten and steel fibers have been considered.

  19. Composition for radiation shielding

    DOEpatents

    Kronberg, J.W.

    1994-08-02

    A composition for use as a radiation shield is disclosed. The shield has a depleted uranium core for absorbing gamma rays and a bismuth coating for preventing chemical corrosion and absorbing gamma rays. Alternatively, a sheet of gadolinium may be positioned between the uranium core and the bismuth coating for absorbing neutrons. The composition is preferably in the form of a container for storing materials that emit radiation such as gamma rays and neutrons. The container is preferably formed by casting bismuth around a pre-formed uranium container having a gadolinium sheeting, and allowing the bismuth to cool. The resulting container is a structurally sound, corrosion-resistant, radiation-absorbing container. 2 figs.

  20. Hybridized polymer matrix composites

    NASA Technical Reports Server (NTRS)

    London, A.

    1981-01-01

    Design approaches and materials are described from which are fabricated pyrostatic graphite/epoxy (Gr/Ep) laminates that show improved retention of graphite particulates when subjected to burning. Sixteen hybridized plus two standard Gr/Ep laminates were designed, fabricated, and tested in an effort to eliminate the release of carbon (graphite) fiber particles from burned/burning, mechanically disturbed samples. The term pyrostatic is defined as meaning mechanically intact in the presence of fire. Graphite particulate retentive laminates were constructed whose constituent materials, cost of fabrication, and physical and mechanical properties were not significantly different from existing Gr/Ep composites. All but one laminate (a Celion graphite/bis-maleimide polyimide) were based on an off-the-shelf Gr/Ep, the AS-1/3501-5A system. Of the 16 candidates studied, four thin (10-ply) and four thick (50-ply) hybridized composites are recommended.

  1. Tendon Structure and Composition.

    PubMed

    Thorpe, Chavaunne T; Screen, Hazel R C

    2016-01-01

    Tendons are soft, fibrous tissues that connect muscle to bone. Their main function is to transfer muscle generated force to the bony skeleton, facilitating movement around a joint, and as such they are relatively passive, inelastic structures, able to resist high forces. Tendons are predominantly composed of collagen, which is arranged in a hierarchical manner parallel to the long axis of the tendon, resulting in high tensile strength. Tendon also contains a range of non-collagenous proteins, present in low amounts, which nevertheless have important functional roles. In this chapter, we describe general tendon composition and structure, and discuss how variations in composition and structure at different levels of the tendon hierarchy confer specific mechanical properties, which are related to tendon function. PMID:27535244

  2. Erosion of composite ceramics

    SciTech Connect

    Routbort, J.L.

    1992-08-01

    The theoretical basis to describe solid-particle erosion of monolithic ceramics is well developed. In many cases, the models can account for the impact velocity, impact angle and erodent-size dependencies of the steady-state erosion rate. In addition, the models account for effects of materials parameters such as fracture toughness and hardness. Steady-state erosion measurements on a wide variety of composite ceramics, including SiC whisker-reinforced Al{sub 2}O{sub 3}, Si{sub 3}N{sub 4} containing Si{sub 3}N{sub 4} or SiC whiskers, Y{sub 2}O{sub 3}-stabilized ZrO{sub 2} reinforced with SiC whiskers, and duplex-microstructure Si{sub 3}N{sub 4} have been reported. The theories developed for monolithic ceramics are, however, less successful in describing the results for composites.

  3. Erosion of composite ceramics

    SciTech Connect

    Routbort, J.L.

    1992-08-01

    The theoretical basis to describe solid-particle erosion of monolithic ceramics is well developed. In many cases, the models can account for the impact velocity, impact angle and erodent-size dependencies of the steady-state erosion rate. In addition, the models account for effects of materials parameters such as fracture toughness and hardness. Steady-state erosion measurements on a wide variety of composite ceramics, including SiC whisker-reinforced Al[sub 2]O[sub 3], Si[sub 3]N[sub 4] containing Si[sub 3]N[sub 4] or SiC whiskers, Y[sub 2]O[sub 3]-stabilized ZrO[sub 2] reinforced with SiC whiskers, and duplex-microstructure Si[sub 3]N[sub 4] have been reported. The theories developed for monolithic ceramics are, however, less successful in describing the results for composites.

  4. Composite drill pipe

    DOEpatents

    Leslie, James C.; Leslie, II, James C.; Heard, James; Truong, Liem , Josephson; Marvin , Neubert; Hans

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  5. Composite carbon foam electrode

    DOEpatents

    Mayer, S.T.; Pekala, R.W.; Kaschmitter, J.L.

    1997-05-06

    Carbon aerogels used as a binder for granulated materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy. 1 fig.

  6. The Composite Infrared Spectrometer

    NASA Technical Reports Server (NTRS)

    Calcutt, Simon; Taylor, Fredric; Ade, Peter; Kunde, Virgil; Jennings, Donald

    1992-01-01

    The Composite Infrared Spectrometer (CIRS) is a remote sensing instrument to be flown on the Cassini orbiter. It contains two Fourier transform spectrometers covering wavelengths of 7-1000 microns. The instrument is expected to have higher spectral resolution, smaller field of view, and better signal-to-noise performance than its counterpart, IRIS, on the Voyager missions. These improvements allow the study of the variability of the composition and temperature of the atmospheres of both Saturn and Titan with latitude, longitude and height, as well as allowing the possibility of discovery of previously undetected chemical species in these atmospheres. The long wavelengths accessible to CIRS allow sounding deeper into both atmospheres than was possible with IRIS.

  7. Uncharged positive electrode composition

    DOEpatents

    Kaun, Thomas D.; Vissers, Donald R.; Shimotake, Hiroshi

    1977-03-08

    An uncharged positive-electrode composition contains particulate lithium sulfide, another alkali metal or alkaline earth metal compound other than sulfide, e.g., lithium carbide, and a transition metal powder. The composition along with a binder, such as electrolytic salt or a thermosetting resin is applied onto an electrically conductive substrate to form a plaque. The plaque is assembled as a positive electrode within an electrochemical cell opposite to a negative electrode containing a material such as aluminum or silicon for alloying with lithium. During charging, lithium alloy is formed within the negative electrode and transition metal sulfide such as iron sulfide is produced within the positive electrode. Excess negative electrode capacity over that from the transition metal sulfide is provided due to the electrochemical reaction of the other than sulfide alkali metal or alkaline earth metal compound.

  8. Carbon Fiber Composites

    NASA Technical Reports Server (NTRS)

    1997-01-01

    HyComp(R), Inc. development a line of high temperature carbon fiber composite products to solve wear problems in the harsh environment of steel and aluminum mills. WearComp(R), self-lubricating composite wear liners and bushings, combines carbon graphite fibers with a polyimide binder. The binder, in conjunction with the fibers, provides the slippery surface, one that demands no lubrication, yet wears at a very slow rate. WearComp(R) typically lasts six to ten times longer than aluminum bronze. Unlike bronze, WearComp polishes the same surface and imparts a self-lube film for years of service. It is designed for continuous operation at temperatures of 550 degrees Fahrenheit and can operate under high compressive loads.

  9. Composite carbon foam electrode

    DOEpatents

    Mayer, Steven T.; Pekala, Richard W.; Kaschmitter, James L.

    1997-01-01

    Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivty and power to system energy.

  10. Probiotics and microbiota composition.

    PubMed

    Sanders, Mary Ellen

    2016-01-01

    Accumulated evidence, corroborated by a new systematic review by Kristensen et al. (Genome Med 8:52, 2016), suggests that probiotics do not significantly impact the fecal microbiota composition of healthy subjects. Nevertheless, physiological benefits have been associated with probiotic consumption by healthy people. Some studies have suggested that probiotics may impact the function of colonizing microbes, although this needs to be further studied. An alternative hypothesis is that probiotics may promote homeostasis of the gut microbiota, rather than change its composition. This hypothesis warrants investigation as a possible mechanism for how probiotics may benefit healthy people.Please see related article: http://genomemedicine.biomedcentral.com/articles/10.1186/s13073-016-0300-5 . PMID:27250499

  11. Peste des Petits Ruminants, the next eradicated animal disease?

    PubMed

    Albina, Emmanuel; Kwiatek, Olivier; Minet, Cécile; Lancelot, Renaud; Servan de Almeida, Renata; Libeau, Geneviève

    2013-07-26

    Peste des Petits Ruminants (PPR) is a widespread viral disease caused by a Morbillivirus (Paramyxoviridae). There is a single serotype of PPR virus, but four distinct genetic lineages. Morbidity and mortality are high when occurring in naive sheep and goats populations. Cattle and African buffaloes (Syncerus caffer) are asymptomatically infected. Other wild ruminants and camels may express clinical signs and mortality. PPR has recently spread in southern and northern Africa, and in central and far-east Asia. More than one billion sheep and goats worldwide are at risk. PPR is also present in Europe through western Turkey. Because of its clinical incidence and the restrictions on animal movements, PPR is a disease of major economic importance. A live attenuated vaccine was developed in the 1980s, and has been widely used in sheep and goats. Current researches aim (i) to make it more thermotolerant for use in countries with limited cold chain, and (ii) to add a DIVA mark to shorten and reduce the cost of final eradication. Rinderpest virus-another Morbillivirus-was the first animal virus to be eradicated from Earth. PPRV has been proposed as the next candidate. Considering its wide distribution and its multiple target host species which have an intense mobility, it will be a long process that cannot exclusively rely on mass vaccination. PPR specific epidemiological features and socio-economic considerations will also have to be taken into account, and sustained international, coordinated, and funded strategy based on a regional approach of PPR control will be the guarantee toward success. PMID:23313537

  12. Computing Equilibrium Chemical Compositions

    NASA Technical Reports Server (NTRS)

    Mcbride, Bonnie J.; Gordon, Sanford

    1995-01-01

    Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

  13. Advanced composite fuselage technology

    NASA Technical Reports Server (NTRS)

    Ilcewicz, Larry B.; Smith, Peter J.; Horton, Ray E.

    1993-01-01

    Boeing's ATCAS program has completed its third year and continues to progress towards a goal to demonstrate composite fuselage technology with cost and weight advantages over aluminum. Work on this program is performed by an integrated team that includes several groups within The Boeing Company, industrial and university subcontractors, and technical support from NASA. During the course of the program, the ATCAS team has continued to perform a critical review of composite developments by recognizing advances in metal fuselage technology. Despite recent material, structural design, and manufacturing advancements for metals, polymeric matrix composite designs studied in ATCAS still project significant cost and weight advantages for future applications. A critical path to demonstrating technology readiness for composite transport fuselage structures was created to summarize ATCAS tasks for Phases A, B, and C. This includes a global schedule and list of technical issues which will be addressed throughout the course of studies. Work performed in ATCAS since the last ACT conference is also summarized. Most activities relate to crown quadrant manufacturing scaleup and performance verification. The former was highlighted by fabricating a curved, 7 ft. by 10 ft. panel, with cocured hat-stiffeners and cobonded J-frames. In building to this scale, process developments were achieved for tow-placed skins, drape formed stiffeners, braided/RTM frames, and panel cure tooling. Over 700 tests and supporting analyses have been performed for crown material and design evaluation, including structural tests that demonstrated limit load requirements for severed stiffener/skin failsafe damage conditions. Analysis of tests for tow-placed hybrid laminates with large damage indicates a tensile fracture toughness that is higher than that observed for advanced aluminum alloys. Additional recent ATCAS achievements include crown supporting technology, keel quadrant design evaluation, and

  14. Polymer film composite transducer

    DOEpatents

    Owen, Thomas E.

    2005-09-20

    A composite piezoelectric transducer, whose piezoeletric element is a "ribbon wound" film of piezolectric material. As the film is excited, it expands and contracts, which results in expansion and contraction of the diameter of the entire ribbon winding. This is accompanied by expansion and contraction of the thickness of the ribbon winding, such that the sound radiating plate may be placed on the side of the winding.

  15. Solid state electrochemical composite

    SciTech Connect

    Visco, Steven J.; Jacobson, Craig P.; DeJonghe, Lutgard C.

    2009-06-30

    Provided is a composite electrochemical device fabricated from highly electronically conductive materials such as metals, metal alloys, or electronically conductive ceramics. The electronic conductivity of the electrode substrate is maximized. The invention allows for an electrode with high electronic conductivity and sufficient catalytic activity to achieve high power density in ionic (electrochemical) devices such as fuel cells and electrolytic gas separation systems including oxygen generation system.

  16. Compound composite odontoma

    PubMed Central

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas. PMID:27194882

  17. Compound composite odontoma.

    PubMed

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas. PMID:27194882

  18. Composite airfoil assembly

    SciTech Connect

    Garcia-Crespo, Andres Jose

    2015-03-03

    A composite blade assembly for mounting on a turbine wheel includes a ceramic airfoil and an airfoil platform. The ceramic airfoil is formed with an airfoil portion, a blade shank portion and a blade dovetail tang. The metal platform includes a platform shank and a radially inner platform dovetail. The ceramic airfoil is captured within the metal platform, such that in use, the ceramic airfoil is held within the turbine wheel independent of the metal platform.

  19. Iron Aluminide Composites

    SciTech Connect

    Schneibel, J.H.

    1998-11-20

    Iron aluminides with the B2 structure are highly oxidation and corrosion resistant. They are thermodynamically compatible with a wide range of ceramics such as TiC, WC, TiB{sub 2}, and ZrB{sub 2}. In addition, liquid iron aluminides wet these ceramics very well. Therefore, FeAl/ceramic composites may be produced by techniques such as liquid phase sintering of powder mixtures, or pressureless melt infiltration of ceramic powders with liquid FeAl. These techniques, the resulting microstructure, and their advantages as well as limitations are described. Iron aluminide composites can be very strong. Room temperature flexure strengths as high as 1.8 GPa have been observed for FeAl/WC. Substantial gains in strength at elevated temperatures (1073 K) have also been demonstrated. Above 40 vol.% WC the room temperature flexure strength becomes flaw-limited. This is thought to be due to processing flaws and limited interfacial strength. The fracture toughness of FeAl/WC is unexpectedly high and follows a mile of mixtures. Interestingly, sufficiently thin (< 1 {micro}m) FeAl ligaments between adjacent WC particles fracture not by cleavage, but in a ductile manner. For these thin ligaments the dislocation pile-ups formed during deformation are not long enough to nucleate cleavage fracture, and their fracture mode is therefore ductile. For several reasons, this brittle-to-ductile size transition does not improve the fracture toughness of the composites significantly. However, since no cleavage cracks are nucleated in sufficiently thin FeAl ligaments, slow crack growth due to ambient water vapor does not occur. Therefore, as compared to monolithic iron aluminizes, environmental embrittlement is dramatically reduced in iron aluminide composites.

  20. Free radical explosive composition

    DOEpatents

    Walker, Franklin E.; Wasley, Richard J.

    1979-01-01

    An improved explosive composition is disclosed and comprises a major portion of an explosive having a detonation velocity between about 1500 and 10,000 meters per second and a minor amount of a getter additive comprising a compound or mixture of compounds capable of capturing or deactivating free radicals or ions under mechanical or electrical shock conditions and which is not an explosive. Exemplary getter additives are isocyanates, olefins and iodine.