Science.gov

Sample records for contenedores como parte

  1. TUBERCULOSIS COMO ENFERMEDAD OCUPACIONAL

    PubMed Central

    Mendoza-Ticona, Alberto

    2014-01-01

    Existe evidencia suficiente para declarar a la tuberculosis como enfermedad ocupacional en diversos profesionales especialmente entre los trabajadores de salud. En el Perú están normados y reglamentados los derechos laborales inherentes a la tuberculosis como enfermedad ocupacional, como la cobertura por discapacidad temporal o permanente. Sin embargo, estos derechos aún no han sido suficientemente socializados. En este trabajo se presenta información sobre el riesgo de adquirir tuberculosis en el lugar de trabajo, se revisan las evidencias para declarar a la tuberculosis como enfermedad ocupacional en trabajadores de salud y se presenta la legislación peruana vigente al respecto. PMID:22858771

  2. Como Lo Hago Yo: Myelomeningocele

    PubMed Central

    Lazareff, Jorge

    2014-01-01

    Fortificación con ádico fólico es efectiva, pero aún falta conciencia en los jóvenes. La legalidad del aborto aumenta la importancia de la consulta prenatal. Realizo la cirugía bajo microcoscopio por razones didácticas. Irrigación continua para reducir la temperatura del tejido. Trato a la plaqueta como tejido viable. No suturo la plaqueta. No cierro músculo. ATB por una semana después de cirugía. Hidrocefalia: Válvula en todos los casos de ventriculomegalia. Médula anclada: Desanclar una sola vez. Chiari II: Revisar la válvula. Incluir en el seguimiento rendimiento escolar, puede indicar obstrucción de la válvula o médula anclada. PMID:24791217

  3. Como preparar un programa de informacion sobre la asistencia economica (Planning a Financial Aid Awareness Program).

    ERIC Educational Resources Information Center

    Department of Education, Washington, DC.

    This booklet, written in Spanish, is intended to be used with a set of slides as part of a presentation to students on "How To Apply for Federal Student Aid" ("Como Solicitar la Asistencia Economica Federal para Estudiantes"). The first part of the book is a script based on the slides. After the script is a guide to hosting a financial aid…

  4. Parts Specialist.

    ERIC Educational Resources Information Center

    Fuqua, Lou; Fuqua, Debbie

    Designed to address the skills that an auto parts specialist must master in order to be effective in the market place, this manual consists of 13 units of instruction. Covered in the units are orientation; human relations; communications; safety; parts and systems identification; stocking, shipping, and receiving; inventory control; cataloging and…

  5. Motorcycle Parts

    NASA Technical Reports Server (NTRS)

    1993-01-01

    An article in NASA Tech Briefs describing a vacuum bagging process for forming composite parts helped a small Oklahoma Company to improve its manufacturing process. President of Performance Extremes, Larry Ortega, and his partners make motorcycle parts from carbon/epoxy to reduce weight. Using vacuum bags, parts have a better surface and fewer voids inside. When heat used in the vacuum bag process caused deformation upon cooling, a solution found in another tech brief solved the problem. A metal plate inside the vacuum bag made for more even heat transfer. A third article described a simple procedure for repairing loose connector pins, which the company has also utilized.

  6. Como Lo Hago Yo: Mielomeningocele En Bolivia

    PubMed Central

    Dabdoub, Carlos F.; Dabdoub, Carlos B.; Villavicencio, Ramiro; Quevedo, Germán

    2014-01-01

    Introducción: Las malformaciones del tubo neural (MTN) representan la segunda causa más frecuente de anomalías congénitas, luego de las cardiopatías. En este grupo se destaca el mielomeningocele (MMC) por su mayor incidencia, y por ser la más incapacitante y la más compleja entre todas las demás malformaciones del sistema nervioso c`entral (SNC). En Bolivia, como en muchos países de Sudamérica, los bajos niveles socio-culturales y la debilidad en el sistema sanitario, hacen que su incidencia y su morbilidad, sean mayores que en las naciones más desarrolladas. Material y Métodos: Se realizó un estudio retrospectivo y descriptivo de 70 casos de MMC, atendidos por un equipo multidisciplinario en el Hospital Universitario Japonés (HUJ) de Santa Cruz de la Sierra, entre 2008-2011. De ellos, 60 fueron intervenidos quirúrgicamente. Resultados: Se realizaron controles prenatales sólo en 27 mujeres (38.6%), diagnosticándose una disrafia espinal en apenas dos casos (7.4%). La edad de ingreso del MMC en su mayoría fue después de las 24 horas (65.6%), predominando su localización en la región lumbosacra (64.3%). De ellos, 67.2% eran abiertos, presentando un 32.9% un daño neurológico motor parcial mientras que 47.1% tenían paraplejia por debajo de la lesión. De los 70 casos, tres (4.3%) no fueron intervenidos, por presentar defectos congénitos severos o estado general grave. Las principales complicaciones posoperatorias inmediatas fueron: dehiscencia de sutura y/o infección de la herida (16.6%), fístula de líquido cefalorraquídeo (LCR) (10%) e infección del SNC (11.7%). La mortalidad general y postoperatoria fue de 7.1% y 3.3%, respectivamente. Al mes de vida presentaban hidrocefalia un 80% de los pacientes operados, colocándose una derivación ventriculoperitoneal (DVP) de presión media. De 9 pacientes que tuvieron un acompanamiento de dos o más años, seis presentaron una médula anclada, que fueron intervenidas quirúrgicamente. Conclusi

  7. 15. Como gatehouse (outlet tower) and access bridge, looking west ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Como gatehouse (outlet tower) and access bridge, looking west from dam crest (Trash rack visible in reservoir pool behind and right of tower) - Bitter Root Irrigation Project, Como Dam, West of U.S. Highway 93, Darby, Ravalli County, MT

  8. Steroids Update, Part 1 and Part 2.

    ERIC Educational Resources Information Center

    Miller, Calvin; Duda, Marty

    1986-01-01

    Part 1 of this two-part article describes the views of a physician who believes that athletes who want to take steroids are best protected by receiving a prescription and monitoring. Part 2 discusses the more general view of physicians that steroids should not be prescribed but perhaps should be monitored. (MT)

  9. Effects of pre-irradiation conditioning of Medfly pupae (Diptera: Tephritidae): Hypoxia and quality of sterile males

    SciTech Connect

    Nestel, D.; Nemny-Lavy, E.; Islam, S.M.; Wornoayporn, V.; Caceres, C.

    2007-03-15

    la calidad de las moscas que la irradiacion en atmosferas con proporcion normal de oxigeno. Aunque esta ha sido por mucho tiempo parte del protocolo de irradiacion en plantas de produccion de mosca esteril, hasta ahora no se ha medido el contenido de oxigeno dentro de los recipientes de empaque de pupa durante la irradiacion. El presente estudio investigo los contenidos de O{sub 2} en los contenedores de pupas de la mosca de las frutas del Mediterraneo (Ceratitis capitata Wiedeman), la habilidad de pupas de crear hipoxia dentro de los contenedores, y los efectos del contenido de O{sub 2} durante la irradiacion del contenedor en la calidad y capacidad de apareamiento de moscas esteriles. Pupas de un dia antes de emerger como adultos crearon atmosferas de maxima hipoxia dentro del empaque en aproximadamente una hora. La proporcion de consumo de O{sub 2} en contenedores sellados es dependiente de la edad de la pupa, y de la temperatura de incubacion. La temperatura de incubacion no afecto significativamente la calidad ni la capacidad de apareamiento de machos derivados de pupas irradiadas bajo condiciones de hipoxia. Sin embargo, la capacidad de apareamiento de machos irradiados como pupas en contenedores abiertos y en condiciones oxigenadas fue drasticamente afectada. En comparacion a los resultados anteriores, atmosferas de 2% y 10% O{sub 2} durante la irradiacion no afectaron la capacidad de apareamiento de moscas esteriles. Polvo fluorescente, aplicado a pupas para marcar las moscas esteriles, no tuvo efectos sobre la capacidad de las pupas de crear hipoxia. Los resultados de este estudio se discuten en base a las practicas actuales de produccion e irradiacion. (author)

  10. Harold Varmus investido bajo juramento como 14.º director d

    Cancer.gov

    Ganador del Premio Nobel, doctor Harold E. Varmus, prestó juramento hoy como 14.º director del Instituto Nacional del Cáncer (NCI).  "Es muy estimulante que estés de regreso con nosotros", dijo la secretaria del Departamento de Salud y Servicios Humanos K

  11. LA BIOÉTICA COMO QUEHACER FILOSÓFICO

    PubMed Central

    Ferrer, Jorge José

    2009-01-01

    El artículo examina el estatuto epistemológico de la bioética como disciplina académica. El autor sostiene que el estatuto epistemológico de un discurso lo determina la pregunta fundamental que se plantea y la respuesta que se busca, focos integradores del discurso. En el caso de la bioética, la pregunta fundamental es de índole moral. La bioética es pues una disciplina ética que tiene su hogar epistemológico en la filosofía. El autor también defiende el concepto de “éticas aplicadas”. Sugiere finalmente que el método de la bioética, sobre todo la que se hace desde nuestras latitudes, debería adoptar el círculo hermenéutico como metodología para su filosofar. PMID:20463860

  12. Parts application handbook study

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The requirements for a NASA application handbook for standard electronic parts are determined and defined. This study concentrated on identifying in detail the type of information that designers and parts engineers need and expect in a parts application handbook for the effective application of standard parts on NASA projects.

  13. Recent DDT and PCB contamination in the sediment and biota of the Como Bay (Lake Como, Italy).

    PubMed

    Bettinetti, R; Quadroni, S; Boggio, E; Galassi, S

    2016-01-15

    Due to its peculiar geographical and morphological characteristics, Lake Como (Northern Italy) represents an interesting study-case for investigating the sub-basin scale circulation of persistent organic pollutants (POPs) that, despite being banned since the 1970s, have reached surprisingly high concentrations in some southern alpine lakes as a consequence of their release from melting glaciers in recent years. In particular, the Como Bay, which is located in the city of Como, seems noteworthy because its waters have a longer residence time than the other areas of the lake. The analyses of the historical concentration of PCBs, pp′DDT and its metabolites in a sediment core sampled from the Como Bay covering a time-period from their ban to recent times, showed that the DDTs have never experienced a significant (p < 0.05) decrease over time, with concentrations of the most abundant homologue, pp′DDE, ranging from 27 to 75 ng g(-1) d.w. Conversely PCBs significantly (p < 0.05) decreased towards recent times, reaching concentrations around 80 ng g(-1) d.w. The contribution of high altitude and local sources was recorded also in the food web: both zooplankton and the zooplanktivorous fish agone were mainly contaminated by pp′DDE (81.4 ng g(-1) w.w. and 534.6 ng g(-1) w.w. respectively) and by the PCB metabolite hexa-CB (449.7 ng g(-1) w.w. and 1672.1 ng g(-1) w.w. respectively). The DDT concentrations in the agone (sampled during the years 2006–2009) never exceeded the limits for human consumption in Italy, while concentrations of six selected PCBs exceeded human health advisory recommendations in one of the fish samples analysed, when it was approximately two times higher than the recommended value of 125 ng g(-1) w.w. PMID:26520265

  14. Valorisation of Como Historical Cadastral Maps Through Modern Web Geoservices

    NASA Astrophysics Data System (ADS)

    Brovelli, M. A.; Minghini, M.; Zamboni, G.

    2012-07-01

    Cartographic cultural heritage preserved in worldwide archives is often stored in the original paper version only, thus restricting both the chances of utilization and the range of possible users. The Web C.A.R.T.E. system addressed this issue with regard to the precious cadastral maps preserved at the State Archive of Como. Aim of the project was to improve the visibility and accessibility of this heritage using the latest free and open source tools for processing, cataloguing and web publishing the maps. The resulting architecture should therefore assist the State Archive of Como in managing its cartographic contents. After a pre-processing consisting of digitization and georeferencing steps, maps were provided with metadata, compiled according to the current Italian standards and managed through an ad hoc version of the GeoNetwork Opensource geocatalog software. A dedicated MapFish-based webGIS client, with an optimized version also for mobile platforms, was built for maps publication and 2D navigation. A module for 3D visualization of cadastral maps was finally developed using the NASA World Wind Virtual Globe. Thanks to a temporal slidebar, time was also included in the system producing a 4D Graphical User Interface. The overall architecture was totally built with free and open source software and allows a direct and intuitive consultation of historical maps. Besides the notable advantage of keeping original paper maps intact, the system greatly simplifies the work of the State Archive of Como common users and together widens the same range of users thanks to the modernization of map consultation tools.

  15. Measuring Populations, Part 2.

    ERIC Educational Resources Information Center

    Dillner, Harry

    This autoinstructional lesson dealing with the study of population growth is the second part of a two-part sequence. This is a learning activity for high school students who have completed Part 1 of "Measuring Populations" and are capable of using a microscope and of preparing slides to be observed. The behavioral objectives, both general and…

  16. Parts-R-Us

    NASA Astrophysics Data System (ADS)

    Brunvand, Erik

    1987-12-01

    Parts-R-Us is a chip that contains a collection of building block parts for asynchronous circuit design. The parts contained on the chip are either not available as standard commercial components, or are standard gates combined into small modules that are particularly useful for building asynchronous control circuits. There are eight different configurations of Parts-R-Us, each offering a different set of asynchronous parts to the user. The parts contained on the chip include: C-elements, transition call modules, transition selectors, transition toggles, transition arbiters, a four phase mutual exclusion element, an asynchronous register, two phase Q-registers, and four phase Q-registers. This document is both a description of Parts-R-Us, and a user's manual for designers using the chip.

  17. 78 FR 36163 - Bitterroot National Forest, Darby Ranger District, Como Forest Health Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... FHP covers approximately 5,640 acres of national forest land between Lake Como and Lost Horse Roads... project area lies between Lake Como Road and Lost Horse Road, about three miles northwest of...

  18. Controlled parts management

    SciTech Connect

    Boyle, C. M.; Hidalgo, S. P.; Martinez, B. J.

    2004-01-01

    The Controlled Parts Management (CPM) system is based on industry standard practices for managing inventory. CPM is designed to record the movement of any type of inventory in a defined region referred to as an Account or SubAccount. The system is used to track the receiving, processing, storing and transfer of inventory parts. CPM provides information on parts, quantity and the exact location of the inventory. CPM is a barcode-based-part tracking system currently used to track controlled parts that are used in the R&D and testing of weapons; this tracking helps maintain the part pedigree that is required for certification of a weapon or weapon test. CPM includes bar code data collection software programmed into portable bar code readers for automating physical inventory services and remote transaction capture. CPM interfaces to other Engineering systems and supports a 'material content' of a weapons test through the test Bill of Materials and assignment of a unique inventory part in CPM. Additional functionality includes the ability to group or join parts, logically or physically and temporary or permanent, to represent discrete parts, containers, subassemblies and assemblies, and groupings.

  19. Morphological investigation of nanostructured CoMo catalysts

    NASA Astrophysics Data System (ADS)

    Pawelec, B.; Castaño, P.; Zepeda, T. A.

    2008-04-01

    This work reports the morphological investigation of nanostructured sulfided CoMo catalysts by means of high-resolution transmission electron microscopy (HRTEM). The catalysts were supported on Ti-modified hexagonal mesoporous silica (HMS-Ti) and P-modified HMS-Ti (P/HMS-Ti) materials. The oxide precursors were characterized by specific surface area (S BET), temperature-programmed reduction (TPR), diffuse reflectance infrared Fourier transform spectroscopy in the OH region (DRIFTS-OH) and X-ray photoelectron spectroscopy (XPS) in order to elucidate the influence of the impregnation sequence (successive vs. simultaneous) and the effect of P-incorporation into HMS-Ti material on the morphology of calcined CoMo catalysts. Both TPR and XPS measurements indicate that the catalysts prepared by successive impregnation possess well-dispersed MoO 3 and CoO phases, whereas their counterparts prepared by simultaneous impregnation additionally possess the CoMoO 4 phase. For all sulfided catalysts, the presence of MoS 2 phase with particle size in the range 3.3-4.4 nm was confirmed by HRTEM. Catalytic activity was evaluated in the reaction of hydrodesulfurization (HDS) of dibenzothiophene (DBT) carried out in a flow reactor at 593 K and hydrogen pressure of 5.5 MPa. P-incorporation into the HMS-Ti material led to an overall increase in HDS activity and the hydrogenation ability of the sulfided catalysts. All catalysts proved to be stable during 10 h time-on-stream (TOS) operation. The activity of sulfide catalysts in the target reaction depends linearly on the surface exposure of Co species in the oxide precursors, as determined by XPS, and on the morphology of the sulfide form of catalysts (surface density of MoS 2 particles and their sizes) as determined by HRTEM.

  20. Part-Time Faculty.

    ERIC Educational Resources Information Center

    Clery, Suzanne B.

    2001-01-01

    This study relates information regarding the role part-time faculty members fill in colleges and universities. Data are from the U.S. Department of Education's National Survey of Postsecondary Faculty, 1999. In that year, 2 of every 5 faculty members taught on a part-time basis, and they taught nearly 40% of all classes and students that were…

  1. Dissecting Diversity Part II

    ERIC Educational Resources Information Center

    Matthews, Frank

    2005-01-01

    This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the American…

  2. Holder for Fragile Parts

    NASA Technical Reports Server (NTRS)

    Holland, L. R.

    1983-01-01

    Fixture with many springfingers holds irregularly-shaped parts. Gripping fixture has hundreds of springfingers, each applies minute force. Total force approximates hydrostatic pressure, resulting in well-distributed load that maintains firm grip without high stress concentrations. Applied to industrial robot manipulators, fixutre enhances ability to grasp delicate parts.

  3. Microlabels For Auto Parts

    NASA Technical Reports Server (NTRS)

    Ash, John P.

    1993-01-01

    Proposed method of unique labeling and identification of automotive parts greatly simplifies recall campaigns and reduces effort and expense associated. Compressed symbols fully characterize each part by type and manufacturing history. Manufacturers notify only those owners whose cars need repairs or modifications. Similar compressed symbology developed for possible use on spacecraft.

  4. Fluoropolymers: Part I.

    ERIC Educational Resources Information Center

    Waller, F. J.

    1989-01-01

    Gives a brief account of fluoropolymers as an important part of polymer chemistry and attempts to make the topic relevant to the secondary school audience. Provides general characteristics and applications for fluoropolymers. (MVL)

  5. [Parenting Information. Informacion Sobre Como Ser Padres Mejores.

    ERIC Educational Resources Information Center

    Moreno, Steve

    These five booklets, containing information on how parenting can effect children's school achievement, are part of a series of 22 innovative booklets designed specifically to help parents understand and help their children learn. Booklet #1, "Parents--Teach Your Children to Learn [Before They Go to School]," defines intelligence and suggests…

  6. Image registration by parts

    NASA Technical Reports Server (NTRS)

    Chalermwat, Prachya; El-Ghazawi, Tarek; LeMoigne, Jacqueline

    1997-01-01

    In spite of the large number of different image registration techniques, most of these techniques use the correlation operation to match spatial image characteristics. Correlation is known to be one of the most computationally intensive operations and its computational needs grow rapidly with the increase in the image sizes. In this article, we show that, in many cases, it might be sufficient to determine image transformations by considering only one or several parts of the image rather than the entire image, which could result in substantial computational savings. This paper introduces the concept of registration by parts and investigates its viability. It describes alternative techniques for such image registration by parts and presents early empirical results that address the underlying trade-offs.

  7. Plutonium microstructures. Part 1

    SciTech Connect

    Cramer, E.M.; Bergin, J.B.

    1981-09-01

    This report is the first of three parts in which Los Alamos and Lawrence Livermore National Laboratory metallographers exhibit a consolidated set of illustrations of inclusions that are seen in plutonium metal as a consequence of inherent and tramp impurities, alloy additions, and thermal or mechanical treatments. This part includes illustrations of nonmetallic and intermetallic inclusions characteristic of major impurity elements as an aid to identifying unknowns. It also describes historical aspects of the increased purity of laboratory plutonium samples, and it gives the composition of the etchant solutions and describes the etching procedure used in the preparation of each illustrated sample. 25 figures.

  8. Part-Time Employment.

    ERIC Educational Resources Information Center

    Guichard, Gus; And Others

    The employment of community college instructors on a part-time basis provides the opportunity for students to study under outstanding instructors whose primary employment may be in industry or in other postsecondary institutions and permits colleges to respond better to community needs with the financial resources available to them. Along with…

  9. Pieces and Parts

    ERIC Educational Resources Information Center

    Miller, Deborah A.; Ellis, Edith B.

    2006-01-01

    Although critical to understanding human sexuality and reproductive physiology, the male and female reproductive anatomy is often minimally covered by teachers. For teachers and students alike, it is often an embarrassing topic to discuss. This activity allows students and teachers to identify the parts of both reproductive systems with little…

  10. Meatcutting Testbook, Part 2.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Bureau of Publications.

    This document contains objective tests for each topic in the Meatcutting Workbook, Part 2, which is designed for apprenticeship meatcutting programs in California. Each of the 30 tests consists of from 5 to 65 multiple-choice items with most tests containing approximately 10 items. The tests are grouped according to the eight units of the…

  11. Meatcutting Testbook, Part I.

    ERIC Educational Resources Information Center

    Strazicich, Mirko, Ed.

    This document contains objective tests for each lesson in the Meatcutting Workbook, Part I (see note), which is designed for apprenticeship programs in meatcutting in California. Each of the 36 tests contains from 10 to 45 multiple-choice items. The tests are grouped according to the eight units of the workbook: the apprentice meatcutter; applied…

  12. Auto Parts Testbook.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Bureau of Industrial Education.

    This testbook contains objective (multiple choice) tests covering each topic in the companion Auto Parts Workbook (see note). The book is arranged so that each section can be detached and given to the student as the test subjects are covered in class. (Answers are not included.) There are an average of ten questions for each of six units. Unit A,…

  13. Auto Parts Workbook.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Bureau of Industrial Education.

    This workbook is designed to provide the student apprentice in the auto parts trade with up-to-date knowledge and technical skills. The subject matter is organized into six units: (1) scope or background material, and employment opportunities in the field; (2) areas of responsibility, including shipping and filling orders, receiving, stock…

  14. Basic Electricity. Part 3.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    Third (part 3) in a set of four guides designed for the student interested in a vocation in electrical work, this guide includes four units: Unit VI--Ohm's Law, covering six lessons (voltage, current-flow and resistance, the Ohm's Law formula, formula for finding voltage, formula for finding resistance); Unit VII--Voltages, covering five lessons…

  15. Basic Electricity. Part 2.

    ERIC Educational Resources Information Center

    Kilmer, Donald C.

    This guide, the second (part 2) in a set of four guides, is designed for the student interested in a vocation in electrical work, and includes two units: Unit IV--Electrical Theory, covering thirteen lessons (matter, the atom, electrical charges in the atom, rules of electric charges, electricity, atoms in an electrical conductor, electrical…

  16. Rockets -- Part II.

    ERIC Educational Resources Information Center

    Leitner, Alfred

    1982-01-01

    If two rockets are identical except that one engine burns in one-tenth the time of the other (total impulse and initial fuel mass of the two engines being the same), which rocket will rise higher? Why? The answer to this question (part 1 response in v20 n6, p410, Sep 1982) is provided. (Author/JN)

  17. Just Perfect, Part 2

    ERIC Educational Resources Information Center

    Scott, Paul

    2007-01-01

    In "Just Perfect: Part 1," the author defined a perfect number N to be one for which the sum of the divisors d (1 less than or equal to d less than N) is N. He gave the first few perfect numbers, starting with those known by the early Greeks. In this article, the author provides an extended list of perfect numbers, with some comments about their…

  18. H5Part

    Energy Science and Technology Software Center (ESTSC)

    2005-12-01

    Particle based simulations of accelerator beam-lines, especially in six dimensional phase space, generate vast amounts of data. Even though a subset of statistical information regarding phase space or analysis needs to be preserved, reading and writing such enormous restart files on massively parallel supercomputing systems remains challenging. H5Part is a very simple data storage schema and provides an API that simplifies the reading/writing of the data to the HDF5 file format. An important foundation formore » a stable visualization and data analysis environment is a stable and portable file storage format and its associated APIs. The presence of a "common file storage format," including associated APIs, will help foster a fundamental level of interoperability across the project’s software infrastructure. It will also haip ensure that key data analysis capabilities are present during the earliest phases of the software development effort. H5Part is built on top of the HDF5 (Hierarchical Data Format). HDF5 offers a self.describing machine-independent binary file format that supports scalable parallel I/O performance for MPI codes on a variety of supercomputlng systems, and works equally well on laptop computers. The API Is available (or C, C++, and Fortran codes. The H5Part file format and APIs enable disparate research groups with different simulation implementations to transparently share datasets and data analysis tools. For instance, the common file format will enable groups that depend on completely different simulation implementations to share data analysis tools like PartView and AVS/Express without any additional programming.« less

  19. Plutonium microstructures, part 1

    NASA Astrophysics Data System (ADS)

    Cramer, E. M.; Bergin, J. B.

    1981-09-01

    Illustrations of inclusions that are seen in plutonium metal as a consequence of inherent and tramp impurities, alloy additions, and thermal or mechanical treatments are presented. This part includes illustrations of nonmetallic and intermetallic inclusions characteristic of major impurity elements as an aid to identifying unknowns are included. Historical aspects of the increased purity of laboratory plutonium samples are described and the composition of the etchant solutions are given. The etching procedure used in the preparation of each illustrated sample is described.

  20. Measurement of cylindrical parts

    NASA Astrophysics Data System (ADS)

    Knight, Paul Douglas, Jr.

    The form of cylindrical parts has been traditionally evaluated using stylus-based mechanical instruments. The Tropel Corporation has developed a grazing incidence interferometer (GII) for the measurement of cylindrical parts. The repeatability of this instrument due to various instrument uncertainties was measured. Differing instrument configurations that produce the same systematic error were determined to produce a zonal calibration method for determining systematic error over the full range of the instrument, given knowledge of the error in a single zone. The effect of the aperture stop on the response of the imaging system to axially sinusoidal artifacts was simulated. Diamond-turned axially sinusoidal artifacts, with amplitude of order1 um and spatial wavelength of order10 mm, were measured to test the axial response of the interferometer. The modulation transfer function of the instrument's imaging system, measured using a knife edge test, predicts the response observed with the sinusoidal artifacts. A diffraction analysis predicts that the measured axial form is modified by a second order envelope function with phase that varies with the relative position of the imaging system focal plane and part position. A compensation method is proposed for this effect. A comparison of roundness measurements by both a traditional stylus-based instrument and the GII was performed demonstrating that the roundness measurements of the two instruments are equivalent when the measurements are properly corrected for the differing effects of surface finish.

  1. Copyright suit partly settled

    NASA Astrophysics Data System (ADS)

    Richman, Barbara T.

    Amidst continuing confusion on what constitutes ‘fair use’ photocopying of copyrighted material, the first legal action taken against an academic institution and individual professors for alleged violations of copyright law has been partly settled. Nine book publishers charged last December that New York University (NYU), several of its faculty, and an off-campus commercial photocopying establishment had violated copyright law. The action against NYU and its faculty was settled out of court. The portion of the lawsuit directed against Unique Copy Center will continue, however.

  2. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  3. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  4. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  5. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  6. 16 CFR Figure 2 to Part 1511 - Small Parts Gage

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Small Parts Gage 2 Figure 2 to Part 1511 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR PACIFIERS Pt.1511, Fig. 2 Figure 2 to Part 1511—Small Parts Gage EC03OC91.069...

  7. Solving Quasars (Part 1)

    SciTech Connect

    Elvis, Martin

    2003-10-29

    Quasars are a frustratingly unsolved problem in astrophysics. For 40 years quasars and AGN have presented an ever-proliferating list of diverse and confusing phenomenology from optical to X-ray wavelengths. The result has been that despite being the most powerful objects in the universe, quasars have been increasingly sidelined in astrophysics. This is unfortunate, as quasars pose major physics, as well as astrophysics puzzles, and should be important in cosmology. The problem, I believe, is not that we do not know enough physics, but rather that we do not have the right geometry. I have proposed a simple geometric and kinematic model that allows all of the quasar diversity to be understood as part of a single structure, the 'Quasar Atmosphere'. This structure suggests a natural physical interpretation, that builds on our understanding of stars (the only fully solved problem in astrophysics), and offers the prospect that we can use quasars for cosmology at last.

  8. Electronic communication. Part III.

    PubMed

    Bergren, M D

    1995-02-01

    This is the concluding article of a three-part series on electronic communication for school nurses. The October 1994 column described electronic communication and the hardware and software required. The December 1994 column examined e-mail, bulletin boards, databases, and file transfers. This column will list many health and nursing resources available on-line. Some of the resources are available only through the Internet. Others are accessible by more than one route: dial-in, telnet, gopher, or world wide web. A few of the services, such as MEDLINE, are only accessed with purchased accounts (Glowniak & Bushway, 1994). The electronic resources of interest to school nurses are so numerous it would be impossible to cite all of them in a column of this length. Selected resources for the school health provider will be listed in alphabetical order. PMID:7767047

  9. A Utilização da Astronomia como Tema Interdisciplinar e Aplicações de Objetos de Aprendizagem

    NASA Astrophysics Data System (ADS)

    da Silva, L. A.; Voelzke, M. R.

    2008-09-01

    Este trabalho visa analisar a possibilidade de relacionar conteúdos aplicados no ensino fundamental e médio de forma interdisciplinar por intermédio da astronomia, com a intervenção de objetos de aprendizagem que possam integrar as disciplinas e a utilização de recursos tecnológicos. Em uma pesquisa prévia com 20 professores de uma escola estadual situada na cidade de Guarulhos foi observado que apenas 25% dos professores utilizam algum recurso tecnológico para o desenvolvimento de conteúdos pertinentes à sua disciplina, tais como sites e softwares educativos, sendo que a maioria absoluta continua ensinando apenas com livros didáticos. A maior parte dos professores apresenta dificuldades em trabalhar sua disciplina de forma interdisciplinar, ou seja, 75% dos professores preferem aplicar os conteúdos seguindo uma hierarquia linear de tópicos, evitando a discussão de temas que de alguma forma estão relacionados. A astronomia pode vir à fascinar o ser humano e despertar sua curiosidade promovendo um maior interesse no aprendizado, podendo favorecer análises interdisciplinares de forma lógica e objetiva, desta forma colocar a astronomia como tema motivador interdisciplinar, pode ser relevante no que se refere ao distanciamento da fragmentação dos conteúdos. No Estado de São Paulo, a implantação da proposta curricular no ensino fundamental e médio mostra claramente a inserção da astronomia na maior parte das séries, principalmente na 6ª série em que todo o bimestre se fala de astronomia.

  10. 78 FR 38287 - Bitterroot National Forest, Darby Ranger District, Como Forest Health Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-26

    .... Correction In the Federal Register of June 17, 2013, in FR DOC 2013- 14229 on page 36163 in the second column...,640 acres of national forest between Lake Como and Lost Horse roads, about 6 miles northwest of...

  11. Cardiovascular Health, Part 2

    PubMed Central

    Baman, Timir S.; Gupta, Sanjaya; Day, Sharlene M.

    2010-01-01

    Context: An athlete’s health may be endangered if he or she continues to compete after diagnosis of certain cardiovascular conditions. The most worrisome risk is sudden cardiac death; the annual rate in US athletes is 1 in 50 000 to 200 000. Evidence Acquisition: Part 2 of this review highlights the current guidelines and controversies surrounding compatibility of participation with a variety of cardiac conditions in competitive and recreational athletics. Data sources were limited to peer-reviewed publications from 1984 to the April 2009. Results: The guidelines published by the American College of Cardiology and the European Society of Cardiology provide a framework for safe competitive and recreational sports participation in athletes with a broad spectrum of inherited and acquired cardiovascular disorders. These guidelines are necessarily conservative because it is not currently possible to individualize risk prediction. Few data are available in many areas, particularly in the noncompetitive arena or in older athletes. Conclusions: Published national guidelines are currently the foundation governing return-to-play decisions in athletes with cardiovascular conditions. Further studies are needed to refine risk stratification algorithms to allow athletes with cardiovascular conditions to reap the health benefits of regular exercise and sports participation without undue risk. PMID:23015920

  12. Procedural Safeguards under Part H: How Judicial Interpretations of Part B May Affect Part H.

    ERIC Educational Resources Information Center

    Turnbull, H. Rutherford, III; Turnbull, Ann P.

    1991-01-01

    This article compares and contrasts provisions for procedural safeguards and due process hearings under 2 sections of Public Law 99-457: Part B, dealing with children ages 3-5, and Part H, dealing with infants and toddlers. Potential problems under Part H are pointed out and suggestions are made for implementing Part H safeguards without conflict.…

  13. Central part of Pier 22, southwest part, showing the northwest ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Central part of Pier 22, southwest part, showing the northwest side of the Shore Power Supply Electric Distribution Center (Building 734) - Mare Island Naval Shipyard, Finger Piers 22 & 23, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

  14. NASA Parts Program Office responsibilities

    NASA Technical Reports Server (NTRS)

    Kilroy, Patrick L.

    1994-01-01

    The topics are presented in viewgraph form and include the following: NASA Parts Program Office responsibilities; NASA Parts Project Office responsibilities; development priorities; and candidate functions for EPIMS baseline.

  15. Air Pollution. Part A: Analysis.

    ERIC Educational Resources Information Center

    Ledbetter, Joe O.

    Two facets of the engineering control of air pollution (the analysis of possible problems and the application of effective controls) are covered in this two-volume text. Part A covers Analysis, and Part B, Prevention and Control. (This review is concerned with Part A only.) This volume deals with the terminology, methodology, and symptomatology…

  16. Exploring Water Pollution. Part II

    ERIC Educational Resources Information Center

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  17. Water Pollution: Part I, Municipal Wastewaters; Part II, Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Fowler, K. E. M.

    This publication is an annotated bibliography of municipal and industrial wastewater literature. This publication consists of two parts plus appendices. Part one is entitled Municipal Wastewaters and includes publications in such areas as health effects of polluted waters, federal policy and legislation, biology and chemistry of polluted water,…

  18. The Moonwatch Programme, Part 8

    NASA Astrophysics Data System (ADS)

    Roberts, Greg

    2015-08-01

    This part deals with the satellite tracking done in Cape Town and covers the Kinetheodolite setup at the then Royal Observatory and manned by part time amateur observers. It also covers the activities of Roberts at his Kenilworth tracking site. The activities of Bill Hirst and his station at Bergvliet are also described.

  19. Staircase and Fractional Part Functions

    ERIC Educational Resources Information Center

    Amram, Meirav; Dagan, Miriam; Ioshpe, Michael; Satianov, Pavel

    2016-01-01

    The staircase and fractional part functions are basic examples of real functions. They can be applied in several parts of mathematics, such as analysis, number theory, formulas for primes, and so on; in computer programming, the floor and ceiling functions are provided by a significant number of programming languages--they have some basic uses in…

  20. Detecting Earthquakes--Part 2.

    ERIC Educational Resources Information Center

    Isenberg, C.; And Others

    1983-01-01

    Basic concepts associated with seismic wave propagation through the earth and the location of seismic events were explained in part 1 (appeared in January 1983 issue). This part focuses on the construction of a student seismometer for detecting earthquakes and underground nuclear explosions anywhere on the earth's surface. (Author/JN)

  1. 6. SITE OVERVIEW. PART 1 OF 6 PART PANORAMA WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. SITE OVERVIEW. PART 1 OF 6 PART PANORAMA WITH NOS. CA-265-7 TO CA-265-11. ARROYO SECO PARKWAY AS SEEN FROM RADIO TOWER HILL (APPROXIMATELY 34° 5' BY 118° 12'30" ON USGS LOS ANGELES QUADRANGLE). PART 1 SHOWS GRAND VIEW POINT AT RIGHT REAR (LOCATION OF CAMERA POSITION FOR PHOTOGRAPHS NOS. 265-1 TO CA-265-5) AND FIGUEROA VIADUCT OVERCROSSING; DOWNTOWN LOS ANGELES IS AT LEFT REAR. LOOKING 234° SW. - Arroyo Seco Parkway, Los Angeles to Pasadena, Los Angeles, Los Angeles County, CA

  2. The Majorana Parts Tracking Database

    SciTech Connect

    Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O׳Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C. -H.; Yumatov, V.; Zhitnikov, I.

    2015-04-01

    The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radiopurity required for this rare decay search.

  3. The Majorana Parts Tracking Database

    SciTech Connect

    Abgrall, N.

    2015-01-16

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. In summary, a web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  4. The Majorana Parts Tracking Database

    DOE PAGESBeta

    Abgrall, N.

    2015-01-16

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation.more » In summary, a web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.« less

  5. The MAJORANA Parts Tracking Database

    NASA Astrophysics Data System (ADS)

    Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O`Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

    2015-04-01

    The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  6. GSFC preferred parts lists PPL-17

    NASA Technical Reports Server (NTRS)

    Baldini, B. P. (Editor)

    1984-01-01

    A listing of preferred parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center (GSFC) space systems and ground support equipment is contained.

  7. Indentured Parts List Maintenance and Part Assembly Capture Tool - IMPACT

    NASA Technical Reports Server (NTRS)

    Jain, Bobby; Morris, Jill; Sharpe, Kelly

    2004-01-01

    Johnson Space Center's (JSC's) indentured parts list (IPL) maintenance and parts assembly capture tool (IMPACT) is an easy-to-use graphical interface for viewing and maintaining the complex assembly hierarchies of large databases. IMPACT, already in use at JSC to support the International Space Station (ISS), queries, updates, modifies, and views data in IPL and associated resource data, functions that it can also perform, with modification, for any large commercial database. By enabling its users to efficiently view and manipulate IPL hierarchical data, IMPACT performs a function unlike that of any other tool. Through IMPACT, users will achieve results quickly, efficiently, and cost effectively.

  8. Las fulguraciones como manifestación de reconexión en el campo magnético solar

    NASA Astrophysics Data System (ADS)

    Bagalá, L. G.; Mandrini, M. C.; Rovira, M. G.; Démoulin, P.

    Las fulguraciones solares son fenómenos transitorios de liberación de energía que se desarrollan en las estructuras magnéticas de las regiones activas del Sol. Las fulguraciones pueden llegar a liberar hasta 1032 erg en 100 seg. en todo el rango electromagnético, y acelerar partículas. En este trabajo mostramos que la ubicación de los abrillantamientos en Hα de diversas fulguraciones está relacionado con las propiedades de las conexiones de las líneas del campo magnético de la región, como se espera por las teorías de reconexión en 3D recientemente desarrolladas (Démoulin et al, 1996a). El campo magnético coronal se extrapola del campo fotosférico observado suponiendo una configuración libre de fuerzas lineal. Por medio de un algoritmo se determinan las regiones donde existe un cambio drástico en la conectividad de las líneas de campo (límites ``cuasi-discontinuos'', o cuasi-separatrices CS). Las CS son bandas abiertas que identifican zonas donde el campo magnético se reconectará con más probabilidad y, siempre que las mismas sean lo suficientemente finas, se producirá allíla liberación de energía proveniente del campo magnético. Hemos encontrado que en todas las regiones fulgurantes estudiadas (Démoulin et al, 1996b) existen CS en los mismos lugares donde se observaron los abrillantamientos en Hα. Allídonde coinciden los abrillantamientos con las CS, éstas tienen un espesor menor que 1 Mm. Las líneas de campo coronales extrapoladas de nuestro modelo tienen sus orígenes fotosféricos a ambos lados de las CS, como se espera dados los recientes estudios de reconexión magnética en 3D. Estos resultados ponen a prueba los modelos presentes sobre fulguraciones solares.

  9. Formation of parting in quartz

    NASA Astrophysics Data System (ADS)

    Jørgen Kjøll, Hans; Eske Sørensen, Bjørn

    2014-05-01

    This paper presents hydrothermal quartz with macroscopic planar parting from the Mesoproterozoic Modum complex in southern Norway. Similar macroscopic parting in hydrothermal quartz with macroscopic planar structures has only been described from two localities in the world; Madagascar (Flörke et al., 1981) and Southern California (Murdoch et al., 1938). The study area consists of well foliated and banded sillimanite- garnet- amphibolite- mica gneiss that is cut at high angle by hydrothermal veins containing albite, chlinoclore, hornblende, hydroxyl apatite and quartz. The rim of the veins is generally made up of almost pure end-member euhedral albite. Then there is vugs with euhedral hornblende (10-25cm long) and euhedral hydroxyl apatite with size ranging from mm scale to several cm. Some places the quartz encloses apatite and hornblende. The quartz is anhedral, inequigranular with undulose extinction bordering sub grain rotation. It has large planar penetrative parting faces with pearly luster; however this is not consistent throughout the outcrop and some places the penetrative faces disappears and the quartz has a conchoidal fracture. The planar faces continue throughout the specimens with a few mm spacing. Thin sections oriented perpendicular to the most pronounced planar structure show lamellas that extinguishes at small angles (2 degrees) to each other. EBSD mapping of the planar faces shows two orientations {0-111} and {1-101}, corresponding to the r- and z-faces respectively, separated by irregular boundaries. The misorientation between these two crystallographic orientations on the parting is a 60 degree rotation on [0 0 1] in correspondence to the dauphiné twin law. Investigations conducted on thin sections cut orthogonal to the parting shows that the parting cuts and offsets the dauphiné twins, indicating a late genesis of the parting. However some internal stress induced movement of the twins are visible. SEM-CL documents three generations of quartz

  10. Calculus: A Computer Oriented Presentation, Part 1 [and] Part 2.

    ERIC Educational Resources Information Center

    Stenberg, Warren; Walker, Robert J.

    Parts one and two of a one-year computer-oriented calculus course (without analytic geometry) are presented. The ideas of calculus are introduced and motivated through computer (i.e., algorithmic) concepts. An introduction to computing via algorithms and a simple flow chart language allows the book to be self-contained, except that material on…

  11. Border Issues in Education, Part 1 [and] Part 2.

    ERIC Educational Resources Information Center

    Alexander-Kasparik, Rosalind, Ed.; Soulas, John, Comp.

    1994-01-01

    These newsletters examine issues in education along the United States and Mexico border. Topics in Part 1 include the ramifications of the North American Free Trade Agreement (NAFTA) for education, the impact of immigration on schools, and the structure and history of the Mexican educational system and its reforms in theory and practice. Educators…

  12. X-pinch. Part II

    NASA Astrophysics Data System (ADS)

    Pikuz, S. A.; Shelkovenko, T. A.; Hammer, D. A.

    2015-06-01

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the spatial, temporal, and spectral characteristics of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  13. X-pinch. Part II

    SciTech Connect

    Pikuz, S. A. Shelkovenko, T. A.; Hammer, D. A.

    2015-06-15

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the spatial, temporal, and spectral characteristics of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  14. Part Fixturing For Diamond Machining

    NASA Astrophysics Data System (ADS)

    Chaloux, Leonard E.

    1984-12-01

    Successful production of diamond turned components can be extremely dependent on the fixturing used to support the workpiece during the machining operation. Typical fixturing methods include vacuum chucking, air chucking and mechanical clamping. Depending on the type of part to be machined, suggested fixturing methods can vary widely. For example, a part requiring a flycut surface is not subject to the centrifugal forces and balance requirements of a part that must be turned about an axis of rotation. Therefore, in many cases the fixturing required for flycutting may be much simpler than that required for turning. In all cases, there are general guidelines that should be followed to determine the best method of fixturing.

  15. Slip-Cast Superconductive Parts

    NASA Technical Reports Server (NTRS)

    Wise, Stephanie A.; Buckley, John D.; Vasquez, Peter; Buck, Gregory M.; Hicks, Lana P.; Hooker, Matthew W.; Taylor, Theodore D.

    1993-01-01

    Complex shapes fabricated without machining. Nonaqueous slip-casting technique used to form complexly shaped parts from high-temperature superconductive materials like YBa(2)Cu(3)O(7-delta). Such parts useful in motors, vibration dampers, and bearings. In process, organic solvent used as liquid medium. Ceramic molds made by lost-wax process used instead of plaster-of-paris molds, used in aqueous slip-casting but impervious to organic solvents and cannot drain away liquid medium. Organic-solvent-based castings do not stick to ceramic molds as they do to plaster molds.

  16. Surface Seal for Carbon Parts

    NASA Technical Reports Server (NTRS)

    Shuford, D. M.; Spruiell, J. P.

    1982-01-01

    Surface pores in parts made of graphite or reinforced-carbon/ carbon materials are sealed by a silicon carbide-based coating. Coating inhibits subsurface oxidation and lengthens part life. Starting material for coating is graphite felt, which is converted to silicon carbide felt by processing it according to a prescribed time/temperature schedule. Converted felt is pulverized in a ball mill and resulting powder is mixed with an equal weight of black silicon carbide powder. Powder mixture is combined with an equal weight of adhesive to form a paste.

  17. Grinding Parts For Automatic Welding

    NASA Technical Reports Server (NTRS)

    Burley, Richard K.; Hoult, William S.

    1989-01-01

    Rollers guide grinding tool along prospective welding path. Skatelike fixture holds rotary grinder or file for machining large-diameter rings or ring segments in preparation for welding. Operator grasps handles to push rolling fixture along part. Rollers maintain precise dimensional relationship so grinding wheel cuts precise depth. Fixture-mounted grinder machines surface to quality sufficient for automatic welding; manual welding with attendant variations and distortion not necessary. Developed to enable automatic welding of parts, manual welding of which resulted in weld bead permeated with microscopic fissures.

  18. Understanding quantitative research: part 1.

    PubMed

    Hoe, Juanita; Hoare, Zoë

    This article, which is the first in a two-part series, provides an introduction to understanding quantitative research, basic statistics and terminology used in research articles. Critical appraisal of research articles is essential to ensure that nurses remain up to date with evidence-based practice to provide consistent and high-quality nursing care. This article focuses on developing critical appraisal skills and understanding the use and implications of different quantitative approaches to research. Part two of this article will focus on explaining common statistical terms and the presentation of statistical data in quantitative research. PMID:23346707

  19. Parts Specialist. Teacher Edition. Second Edition.

    ERIC Educational Resources Information Center

    Fuqua, Lou; And Others

    This set of instructional materials provides secondary and postsecondary students with an opportunity to explore the career choices available in the parts merchandising industry. The skills presented are useful to any student pursuing a career in auto parts, heavy equipment parts, small engine parts, tractor parts, appliance parts, or for any…

  20. Laserdisk Directory--Part 1.

    ERIC Educational Resources Information Center

    Connolly, Bruce, Comp.

    1986-01-01

    This first installment of four-part "Online/Database Laserdisk Directory" reports on aspects of laserdisks including: product name; product description; company name; conpatibility information; type of laserdisk (compact disc read-only-memory, videodisk); software used; interface with magnetic media capability; conditions of usage; price;…

  1. Air Pollution Control, Part I.

    ERIC Educational Resources Information Center

    Strauss, Werner, Ed.

    Authoritative reviews in seven areas of current importance in air pollution control are supplied in this volume, the first of a two-part set. Titles contained in this book are: "Dispersion of Pollutants Emitted into the Atmosphere,""The Formation and Control of Oxides of Nitrogen in Air Pollution,""The Control of Sulfur Emissions from Combustion…

  2. OCCUPATIONS FOR YOU, PART ONE.

    ERIC Educational Resources Information Center

    DES ROCHES, DEAN L.

    DEVELOPED AS PART OF A CURRICULUM PROJECT DESCRIBED IN VT 004 454 TO HELP YOUNG PEOPLE LEARN BASIC PRINCIPLES AND CONCEPTS OF MECHANICS AND TECHNOLOGY, THIS BOOK WAS DESIGNED TO STIMULATE INTEREST AND ANSWER QUESTIONS ABOUT VOCATIONAL CHOICE, STIMULATE INTEREST IN READING, AND PROVIDE CONTENT TO RELATE TO ACADEMIC STUDY. THE MATERIALS DEVELOPED IN…

  3. Roots/Routes: Part II

    ERIC Educational Resources Information Center

    Swanson, Dalene M.

    2009-01-01

    This narrative acts as an articulation of a journey of many routes. Following Part I of the same research journey of rootedness/routedness, it debates the nature of transformation and transcendence beyond personal and political paradoxes informed by neoliberalism and related repressive globalizing discourses. Through a more personal, descriptive,…

  4. Taking Part One GNVQ Forward.

    ERIC Educational Resources Information Center

    Frankland, Gillian; Ebrahim, Nazir

    This document is intended to assist practitioners involved in the delivery of Part One General National Vocational Qualifications (GNVQs), which are GNVQs designed for students in the United Kingdom who are at Key Stage 4 and the post-16 level. Section 1 examines the following topics of interest to centers that are contemplating introducing Part…

  5. List of Preferred Electronic Parts

    NASA Technical Reports Server (NTRS)

    Covey, R. E.; Scott, W. R.; Hess, L. M.; Steffy, G.; Stott, F. R.

    1986-01-01

    Components passed stringent qualification tests tabulated and described. Destructive and nondestructive qualification testing confirmed parts capable of withstanding spacecraft environments without excessive degradation and have stable characteristics during operating lives. Testing assessed effects of electrical, environmental, and mechanical stresses in various levels and time durations.

  6. Death: A Part of Life.

    ERIC Educational Resources Information Center

    Otero, George G.; Harris, Zoanne

    This two-part curriculum unit includes 20 slides depicting Days of the Dead in Mexico and the United States. The unit is designed to help middle school students compare customs and practices associated with death throughout the world in a way that promotes understanding of the values and needs that produce and are reinforced by death rituals and…

  7. Local Area Networks: Part II.

    ERIC Educational Resources Information Center

    Dessy, Raymond E., Ed.

    1982-01-01

    Discusses five approaches used by industry/colleges to provide local area network (LAN) capabilities in the analytical laboratory: (1) mixed baseband bus network coupled to a star net; (2) broadband bus network; (3) ring network; (4) star network coupled to broadband net; and (5) simple multiprocessor center. Part I (September issue) focused on…

  8. Hydroforming of flanged tubular part

    SciTech Connect

    Joo, B. D.; Jang, J. H.; Choi, M. K.; Moon, Y. H.

    2010-06-15

    Tube hydroforming is the technology that utilizes hydraulic pressure to form a tube into desired shapes inside die cavities. Recently, tube hydroforming technology draws attentions of automotive industries due to its advantages such as weight reduction, increased strength, improved quality and reduced tooling cost. Hydroformed automotive parts used as structural components in vehicle body frame or subframe often have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. In this study, a tube hydroformed product which has flange has been formed at various processing conditions. To accomplish successful flange hydroforming process, thorough investigation on proper combination of process parameters such as internal hydraulic pressure and tool geometry has been performed. For the process design FE analysis was performed with Dynaform 5.5. With optimized die parting angle and circumferential expansion ratio, hydroforming experiments to form flange were performed and forming characteristics at various process conditions were analyzed. The results show that flanged parts can be successfully produced by tube hydroforming process.

  9. Piecing Together a College Education behind Bars. Part One [and] Part Two [and] Part Three [and] Part Four.

    ERIC Educational Resources Information Center

    Taylor, Jon Marc

    2002-01-01

    This is a four-part article on how to earn a college degree from inside prison. The author, who earned his master's while in prison, argues that education offers prisoners the best chance of staying out of prison after their release, as well as qualifying them for a decent job and easing social reintegration. The author outlines the approaches…

  10. Playing It Safe: Part II.

    ERIC Educational Resources Information Center

    Penman, Kenneth A.; Niccolai, Frances R.

    1985-01-01

    Explains how to prevent outdoor sports injuries; discusses related litigation and specific cases involving playing field turf, tennis, skiing, and pools; and sets out facility design and maintenance considerations and recommendations. A sidebar provides information about injury insurance available to NCAA schools. Part I of this article appeared…

  11. Glues Used in Airplane Parts

    NASA Technical Reports Server (NTRS)

    Allen, S W; Truax, T R

    1920-01-01

    This report was prepared for the National Advisory Committee for Aeronautics and presents the results of investigations conducted by the Forest Products Laboratory of the United States Forest Service on the manufacture, preparation, application, testing and physical properties of the different types of glues used in wood airplane parts.

  12. Readings in Albanian. Part 1.

    ERIC Educational Resources Information Center

    Newmark, Leonard; And Others

    This text is designed to enable a student who knows English to gain reading proficiency in Albanian. Part One, which is presented here, includes the first 30 of the 100 units in the complete course. The units include texts from various periods of Albanian writing and include a variety of contents and styles: folklore, biography, news articles,…

  13. Part-Time Faculty Handbook.

    ERIC Educational Resources Information Center

    College of the Mainland, Texas City, TX.

    This document contains comprehensive information designed to orient the part-time faculty member to the College of the Mainland. Information included in the handbook covers the history and philosophy of the college; student and instructor rights; a description of social and economic characteristics of the students; a description of the faculty;…

  14. Cleaning of parts for new manufacturing and parts rebuilding

    NASA Astrophysics Data System (ADS)

    Doherty, Jeff

    1994-06-01

    Parts cleaning is the largest single expense, and the most time consuming activity, in rebuilding and new manufacturing. On average, 25% to 40% of the total labor and overhead burden is spent on cleaning. EPA and OSHA pressures add to the burden by making some methods and chemicals obsolete. Some of the processes and chemicals in current use will be curtailed and or outlawed in the future. How can a shops and industries make long term decisions or capital investments in cleaning and process improvements when the government keeps changing its rules? At the MART Corporation in Saint Louis, Missouri, we manufacture a line of cabinet-style batch cleaning machines known as Power Washers. Twenty years ago MART invented and patented the Power Washer process, a cleaning method that recycles wash solution and blasts contaminates as they are washed off the more heavily contaminated parts. Since the initial invention MART has continued to R&D the washing process and develop ancillary systems that comply with EPA and OSHA regulations. For applications involving new industrial parts or items requiring specification cleaned surfaces. MART provides filtration and solution conditioning systems, part drying operations, and triple rinsing. Units are available in stainless steel or higher alloys. We are not alone in the washer manufacturing business. You have many choices of cleaning solutions (no pun intended) which will perform in your operations and yield good results. As a manufacturer, we are interested in your success with our equipment. We have all heard the horror stories of companies having selected inappropriate cleaning systems and or processes which then brought the company to its knees, production wise. Assembly, appearance, warranty, and performance shortcomings of finished products can often be directly related to the cleaning process and its shortcomings.

  15. Getting in Taped, Part I and Part II

    ERIC Educational Resources Information Center

    Cundy, H. M.; Higgins, J.

    1971-01-01

    This article is in two parts: discussion of mathematical concepts involved in converting the reading from the tape-recorder counter which counts the turns of the run-off spool to that from the counter which counts turns of the take-up spool; calculating the length of tape run off when given the reading from the tape-recorder counter of the run-off…

  16. Prevalence of previously undiagnosed abdominal aortic aneurysms in the area of Como: the ComoCuore "looking for AAA" ultrasonography screening.

    PubMed

    Corrado, Giovanni; Durante, Alessandro; Genchi, Vincenzo; Trabattoni, Loris; Beretta, Sandro; Rovelli, Enza; Foglia-Manzillo, Giovanni; Ferrari, Giovanni

    2016-08-01

    The prognosis for abdominal aortic aneurysm (AAA) rupture is poor. Long-term follow-up of population-based randomized trials has demonstrated that ultrasound (US) screening for abdominal aortic aneurysms (AAAs) measuring 3 cm or greater decreases AAA-related mortality rates and is cost-effective. We though to prospectively perform during a 26-month period a limited US examination of the infrarenal aorta in volunteers of both gender aged 60-85 years without history of AAA living in the area of Como, Italy. From September 2010 to November 2013 ComoCuore, a no-profit nongovernmental association, enrolled 1555 people (aged 68.8 ± 6.8 years; 48.6 % males). Clinical data and a US imaging of the aorta were collected for each participant. AAA was found in 22 volunteers (1.4 %) mainly males (2.5 % in males vs. 0.4 % in females p = 0.005). Overall, the prevalence of cardiovascular risk factors was higher in patients with vs. without AAA (mean 2.9 ± 3.0 vs. 1.4 ± 1.0 respectively, p < 0.0001). Independent predictors of AAA on multivariate analysis were age (OR 1.14, 1.06-1.22; p < 0.0001), male gender (OR 8.23, 1.79-37.91; p = 0.007), and both current (OR 4.98, 1.57-15.79; p = 0.007) and previous smoking (OR 2.76, 1.12-8.94; p = 0.03). Our study confirms the feasibility of one time US screening for AAA in a large cohort of asymptomatic people. Independent predictors of AAA were male sex, older age and a history of smoking. Accordingly to recent data the prevalence of AAA seems to be declining, maybe due to a reduction of smoking in Italy. PMID:27215751

  17. Modernizing medical photography, part 1.

    PubMed

    Crompton, Paul

    2004-12-01

    Government, media and public focus on waiting times in the National Health Service in the United Kingdom has forced the organization to look closely at the process by which a patient progresses through an increasingly complex and ever changing system. In an effort to streamline the patient journey or care pathway, modernizers have turned to business and manufacturing for solutions. Whilst medical photographers need to recognize their role in this context, they are also facing major technological modernization through the development of digital photography. Part 1 of this paper looks at the origins of some of the techniques presently being used to modernize the patient journey. Part 2 shows how these tools of modernization can be utilized to harness the advantages of digital technology to provide a modern and appropriate medical photography service in a large, disparate teaching hospital. PMID:15805027

  18. The Inconvenient Truth. Part 2

    SciTech Connect

    Athanasiou, T.

    2007-01-15

    Essay-type of publication on what should happen next after Al Gore's presentations on the Inconvenient Truth about the impacts of climate change. The essay states in the first lines: 'We've seen the movie, so we know the first part - we're in trouble deep. And it's time, past time, for at least some of us to go beyond warning to planning, to start talking seriously about a global crash program to stabilize the climate.

  19. 14 CFR 27.602 - Critical parts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Critical parts. 27.602 Section 27.602 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.602 Critical parts. (a) Critical part. A critical part is a part,...

  20. 14 CFR 29.602 - Critical parts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Critical parts. 29.602 Section 29.602 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.602 Critical parts. (a) Critical part. A critical part is a part,...

  1. The Sefwi-Comoé belt Ghana/Ivory Coast : a major crustal shear zone ?

    NASA Astrophysics Data System (ADS)

    Jessell, Mark

    2010-05-01

    The Palaeoproterozoic Sefwi-Comoé region that straddles Ghana and the Ivory Coast in West Africa has been characterised as resulting from a combination of compression and simple shear during late synkinematic leucogranite intrusion. The analysis of regional geophysical datasets allows us to better define the geometry of the major lithostratigraphic packages and their structural contacts in this region. This analysis reveals a series of well defined leucogranites intrusions enveloped by high strain zones. Recent finite element modelling of two-phase aggregates has shown that we can analyse the geometry of these systems both in terms of their finite defomation and their mechanical contrast. We interpret the geometries we see in the Sefwi-Comoé region as reflecting the activity of a major crustal deformation zone which was dominated by simple shear. The comparison with the modelling suggests a finite shear strain of approximately 5 gamma, which in turn implies a lateral displacement of 400 km across the belt. Our analysis suggests that the leucogranites were already acting as more rigid bodies during the (dextral?) shearing, suggesting that their emplacement was predominantly pre-kinematic, and which has implications for their potential subsequent remobilization by gravitational forces.

  2. X-pinch. Part I

    SciTech Connect

    Pikuz, S. A. Shelkovenko, T. A.; Hammer, D. A.

    2015-04-15

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The concept of the X-pinch arose in the course of innovative experiments on studying the generation of hot dense plasma in nanosecond Z-pinches. The main idea was to localize the region occupied by the plasma and stabilize the moment of its formation. This was achieved by using a load in the form of crossed wires. The resulting plasma object turned out to be so interesting that a new scientific direction appeared in plasma physics. At present, studies in this direction are being performed in many laboratories worldwide. The term X-pinch became conventional, and sections devoted to its study are always present at plasma conferences. X-pinch is not only a very interesting scientific object, but also a unique source of X-ray emission with extreme parameters. The use of X-pinches for point-projection X-ray radiography of high-energy-density objects provided many new experimental results. In some cases, the concepts of the processes occurring in matter upon fast energy deposition changed dramatically. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  3. X-pinch. Part I

    NASA Astrophysics Data System (ADS)

    Pikuz, S. A.; Shelkovenko, T. A.; Hammer, D. A.

    2015-04-01

    Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The concept of the X-pinch arose in the course of innovative experiments on studying the generation of hot dense plasma in nanosecond Z-pinches. The main idea was to localize the region occupied by the plasma and stabilize the moment of its formation. This was achieved by using a load in the form of crossed wires. The resulting plasma object turned out to be so interesting that a new scientific direction appeared in plasma physics. At present, studies in this direction are being performed in many laboratories worldwide. The term X-pinch became conventional, and sections devoted to its study are always present at plasma conferences. X-pinch is not only a very interesting scientific object, but also a unique source of X-ray emission with extreme parameters. The use of X-pinches for point-projection X-ray radiography of high-energy-density objects provided many new experimental results. In some cases, the concepts of the processes occurring in matter upon fast energy deposition changed dramatically. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

  4. Understanding Radiation Thermometry. Part I

    NASA Technical Reports Server (NTRS)

    Risch Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  5. Understanding Radiation Thermometry. Part II

    NASA Technical Reports Server (NTRS)

    Risch, Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  6. NASA EEE Parts 2014 Year in Review

    NASA Technical Reports Server (NTRS)

    Lee, Sara-Anne

    2015-01-01

    The NASA Electronic Parts and Packaging Program continue to support Electrical, Electronic and Electromagnetic Parts for the agency with an eventful year of workshops, innovations, testing and challenges.

  7. Future Jet Technologies, Part C

    NASA Astrophysics Data System (ADS)

    Gal-Or, Benjamin

    2013-06-01

    This updated, PART C REVIEW, covers the dangerous global spread of JS-stealth, drone technology [1-91], canard-free, stealth, new agile drones and the highly debated, 480 billion F-35 International Program as reported on March 13, 2013 to the U.S. Congress [92]. Due to serious design issues, spiraling high costs and years in delays, alternatives are analyzed here, depicted and proposed, mainly from the propulsion-design point of view. These include fleets of low-cost, stealth, jet-steered-drones mixed with non-stealthy, low-cost, ready-to-be-delivered, U.S. or European or Russian fighter aircraft. Can a few F-35s win against large fleets of stealth agile drones? To understand the dangers and critical issues involved, the author's own, past classified information is partly disclosed, while resorting to images in Figs. 2(a) and 2(b) taken from his book [2] and from Wikipedia, the "Free Encyclopedia", in all other images.

  8. Standards in neurosonology. Part III

    PubMed Central

    Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-01-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  9. Facilitation of learning: part 2.

    PubMed

    Warburton, Tyler; Houghton, Trish; Barry, Debbie

    2016-04-27

    The previous article in this series of 11, Facilitation of learning: part 1, reviewed learning theories and how they relate to clinical practice. Developing an understanding of these theories is essential for mentors and practice teachers to enable them to deliver evidence-based learning support. This is important given that effective learning support is dependent on an educator who possesses knowledge of their specialist area as well as the relevent tools and methods to support learning. The second domain of the Nursing and Midwifery Council's Standards to Support Learning and Assessment in Practice relates to the facilitation of learning. To fulfil this domain, mentors and practice teachers are required to demonstrate their ability to recognise the needs of learners and provide appropriate support to meet those needs. This article expands on some of the discussions from part 1 of this article and considers these from a practical perspective, in addition to introducing some of the tools that can be used to support learning. PMID:27191319

  10. Standards in neurosonology. Part III.

    PubMed

    Wojczal, Joanna; Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-06-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27446600

  11. Standards in neurosonology. Part II

    PubMed Central

    Tomczyk, Tomasz; Luchowski, Piotr; Kozera, Grzegorz; Kaźmierski, Radosław; Stelmasiak, Zbigniew

    2016-01-01

    The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler). Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity). PMID:27104002

  12. Supernovae. Part I: the events

    NASA Astrophysics Data System (ADS)

    Trimble, Virginia

    1982-10-01

    Since the heroic era of Baade and Zwicky, our understanding of supernovae has advanced in hops and skips rather than steadily. The most recent jump has been into fairly general agreement that observations of Type I's can be interpreted as the manifestation of the decay of about 1Msolar of Ni56 and observations of Type II's as the manifestation of >~1051 ergs deposited at the bottom of a supergiant envelope by core bounce as a central neutron star forms. This paper explores the history of these and other ideas of what is going on in supernovae, the presupernova evolution of the parent stars and binary systems, observed properties of the events, and models for them. A later paper (Part II: the aftermath) will address the results of supernovae-their remnants, production of cosmic rays and gamma rays, nucleosynthesis, and galactic evolution-and the future of supernova research.

  13. Neurofibromatosis: part 2--clinical management.

    PubMed

    Batista, Pollyanna Barros; Bertollo, Eny Maria Goloni; Costa, Danielle de Souza; Eliam, Lucas; Cunha, Karin Soares Gonçalves; Cunha-Melo, José Renan; Darrigo Junior, Luiz Guilherme; Geller, Mauro; Gianordoli-Nascimento, Ingrid Faria; Madeira, Luciana Gonçalves; Mendes, Hérika Martins; Miranda, Débora Marques de; Mata-Machado, Nikolas Andre; Morato, Eric Grossi; Pavarino, Érika Cristina; Pereira, Luciana Baptista; Rezende, Nilton Alves de; Rodrigues, Luíza de Oliveira; Sette, Jorge Bezerra Cavalcanti

    2015-06-01

    Part 1 of this guideline addressed the differential diagnosis of the neurofibromatoses (NF): neurofibromatosis type 1 (NF1), neurofibromatosis type 2 (NF2) and schwannomatosis (SCH). NF shares some features such as the genetic origin of the neural tumors and cutaneous manifestations, and affects nearly 80 thousand Brazilians. Increasing scientific knowledge on NF has allowed better clinical management and reduced rate of complications and morbidity, resulting in higher quality of life for NF patients. Most medical doctors are able to perform NF diagnosis, but the wide range of clinical manifestations and the inability to predict the onset or severity of new features, consequences, or complications make NF management a real clinical challenge, requiring the support of different specialists for proper treatment and genetic counseling, especially in NF2 and SCH. The present text suggests guidelines for the clinical management of NF, with emphasis on NF1. PMID:26083891

  14. Computerized parts list system coordinates engineering releases, parts control, and manufacturing planning

    NASA Technical Reports Server (NTRS)

    Horton, W.; Kinsey, M.

    1967-01-01

    Computerized parts list system compiles and summarize all pertinent and available information on complex new systems. The parts list system consists of three computer subroutines - list of parts, parts numerical sequence list, and specifications list.

  15. Holding Irregularly Shaped Parts For Machining

    NASA Technical Reports Server (NTRS)

    Hilton, Burt W.; Wilson, Rick R.

    1988-01-01

    Part with complicated, irregular outside contours clamped for precise machining of internal passages with aid of simple method. Exterior of part cast in Rigidex, or equivalent epoxy. Forms wall to be clamped. Interior of part machined to finish of 125 microinches or finer. When machining finished, epoxy melted away by heating part to 200 degree F.

  16. Method of forming and assembly of parts

    DOEpatents

    Ripley, Edward B.

    2010-12-28

    A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  17. 37 CFR 41.11 - Ex Parte communications in inter partes proceedings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... inter partes proceedings. 41.11 Section 41.11 Patents, Trademarks, and Copyrights UNITED STATES PATENT... INTERFERENCES General Provisions § 41.11 Ex Parte communications in inter partes proceedings. An ex parte communication about an inter partes reexamination (subpart C of this part) or about a contested case (subparts...

  18. Using Unique Identifiers to Promote Data Sharing between Part C and Part B. inForum

    ERIC Educational Resources Information Center

    Keller-Allen, Chandra

    2009-01-01

    Obligations of state education agencies (SEAs) and Part C lead agencies set forth by the Individuals with Disabilities Education Act (IDEA) pertaining to early childhood transition from Part C to Part B of IDEA are described in several regulatory and guidance documents including Part C draft regulations (34 CFR Part 303), Part B regulations (34…

  19. JPL preferred parts list: Reliable electronic components

    NASA Technical Reports Server (NTRS)

    Covey, R. E.; Scott, W. R.; Hess, L. M.; Steffy, T. G.; Stott, F. R.

    1982-01-01

    The JPL Preferred Parts List was prepared to provide a basis for selection of electronic parts for JPL spacecraft programs. Supporting tests for the listed parts were designed to comply with specific spacecraft environmental requirements. The list tabulates the electronic, magnetic, and electromechanical parts applicable to all JPL electronic equipment wherein reliability is a major concern. The parts listed are revelant to equipment supplied by subcontractors as well as fabricated at the laboratory.

  20. Management of a coordinated parts program

    NASA Technical Reports Server (NTRS)

    Krishnan, G. S.

    1997-01-01

    The organization of the management of a parts program is discussed. The organizational structure faced by the parts manager and the advantages and disadvantages of managing a coordinated parts program are analyzed. The reliable operation of an instrument is the key to the success of the mission, together with the management of the parts program. The analysis led to the conclusion that the setting up of the decision support model will aid the parts manager in the decision making and the process control.

  1. Commercial Parts Technology Qualification Processes

    NASA Technical Reports Server (NTRS)

    Cooper, Mark S.

    2013-01-01

    Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

  2. Range Imaging without Moving Parts

    NASA Technical Reports Server (NTRS)

    Blair, J. Bryan; Scott, V. Stanley, III; Ramos-Izquierdo, Luis

    2008-01-01

    Range-imaging instruments of a type now under development are intended to generate the equivalent of three-dimensional images from measurements of the round-trip times of flight of laser pulses along known directions. These instruments could also provide information on characteristics of targets, including roughnesses and reflectivities of surfaces and optical densities of such semi-solid objects as trees and clouds. Unlike in prior range-imaging instruments based on times of flight along known directions, there would be no moving parts; aiming of the laser beams along the known directions would not be accomplished by mechanical scanning of mirrors, prisms, or other optical components. Instead, aiming would be accomplished by using solid-state devices to switch input and output beams along different fiber-optic paths. Because of the lack of moving parts, these instruments could be extraordinarily reliable, rugged, and long-lasting. An instrument of this type would include an optical transmitter that would send out a laser pulse along a chosen direction to a target. An optical receiver coaligned with the transmitter would measure the temporally varying intensity of laser light reflected from the target to determine the distance and surface characteristics of the target. The transmitter would be a combination of devices for generating precise directional laser illumination. It would include a pulsed laser, the output of which would be coupled into a fiber-optic cable with a fan-out and solid-state optical switches that would enable switching of the laser beam onto one or more optical fibers terminated at known locations in an array on a face at the focal plane of a telescope. The array would be imaged by the telescope onto the target space. The receiver optical system could share the aforementioned telescope with the transmitter or could include a separate telescope aimed in the same direction as that of the transmitting telescope. In either case, light reflected

  3. [First part: the intestinal microbiota].

    PubMed

    Capurso, Lucio

    2016-06-01

    The human gastrointestinal tract contains a large number of commensal (non pathogenic) and pathogenic microbial species that have co-evolved with the human genome and differ in composition and function based on their location, as well as age, sex, race/ethnicity, and diet of their host and we can in fact consider the human body as a mix of human and bacterial cells. It is now evident that the large intestine is much more than an organ for waste material and absorption of water, salts and drugs, and indeed has a very important impact on human health, for a major part related to the specific composition of the complex microbial community in the colon. In man, the large gut receives material from the ileum which has already been digested and the contents are then mixed and retained for 6-12 hours in the caecum and right colon. Thus, the large intestine is an open system, with nutrients flowing in the caecum, and bacteria, their metabolic products, and undigested foodstuffs being excreted as faeces. The anaerobic brakdown of carbohydrate and protein by bacteria is known conventionally as fermentation. In man the major end products are the short-chain fatty acids (SCFA) acetate, propionate, butirate, the gases H2 and CO2, ammonia, amines, phenols and energy, which the bacteria use for growth and the maintenance of cellular function. The microbiota is also an important factor in the development of the immune response. The interaction between the gastrointestinal tract and resident microbiota is well balanced in healthy individuals, but its breakdown can lead to intestinal and extraintestinal disease. PMID:27362717

  4. Two part mine roof support unit

    SciTech Connect

    Becker, K.; Dunkel, G.; Elsner, B.

    1983-08-30

    A mine roof support unit is constituted by two detachably connected parts. Each of the parts has a floor girder which supports a roof bar by means of a hydraulic prop. The roof support unit is intended for use at the lower end of an inclined longwall working which meets its access gallery at an angle other than 90/sup 0/. The detachability of the two parts enables one of these parts to be removed from the working as its face is advanced. The removed part can then be transported to the other end of working. Each of the parts is provided with means for detachably connecting an advance mechanism.

  5. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... 300.8(c)(6). • Multiple disabilities 300.8(c)(7). • Native language 300.29(a). • Occupational...

  6. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... “Limited English proficient”) LEUKEMIA (Other health impairment) 300.8(c)(9)(i). LIMITED ENGLISH...

  7. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 2 2012-07-01 2012-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology... “Limited English proficient”) LEUKEMIA (Other health impairment) 300.8(c)(9)(i). LIMITED ENGLISH...

  8. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true Index for IDEA-Part B Regulations (34 CFR Part 300) E... B Regulations (34 CFR Part 300) ACCESS TO • Access rights (Parents) 300.613. • Assistive technology...). • Protections for children not determined eligible 300.534. • Secretaries of the Interior and Health and...

  9. 34 CFR Appendix E to Part 300 - Index for IDEA-Part B Regulations (34 CFR Part 300)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false Index for IDEA-Part B Regulations (34 CFR Part 300) E Appendix E to Part 300 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION ASSISTANCE TO STATES FOR THE EDUCATION OF CHILDREN...

  10. Holding fixture for variable-contour parts

    NASA Technical Reports Server (NTRS)

    Haynie, C. C.; Packer, P. N.; Zebus, P. P.

    1979-01-01

    Array of vacuum cups on spindles holds parts for safe machining and other processings. Variable-contour part resting on fixture is held firmly enough for machining, coating, or other mechanical treatment.

  11. Talking about the Weather, Part II.

    ERIC Educational Resources Information Center

    Gibb, Allan A.

    1984-01-01

    This second part of a two-part article highlights some mathematics involved in the study of meteorology. Examples are given of the application of mathematics to the study of the atmosphere, with three problems discussed. (MNS)

  12. Actual to expected studies--Part 1.

    PubMed

    Wesley, David; Cox, Hugh

    2014-01-01

    In this Part 1 of a two-part series, pivot tables are used to analyze mortality and then a step-by-step process is demonstrated of converting seriatim data that is suitable for pivot table analysis. PMID:25816466

  13. Voice Teachers on Voice, Part 3

    ERIC Educational Resources Information Center

    Gollobin, Laurie Brooks; White, Harvey

    1978-01-01

    Concludes a three-part symposium with eight prominent voice teachers on voice teaching methods. In this part, the teachers discuss placement, voice breaks, tone deafness, covered tone, and developing volume and offer some final general comments. (Editor)

  14. 49 CFR 236.505 - Proper operative relation between parts along roadway and parts on locomotive.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Proper operative relation between parts along... § 236.505 Proper operative relation between parts along roadway and parts on locomotive. Proper operative relation between the parts along the roadway and the parts on the locomotive shall obtain...

  15. 20 CFR 801.3 - Applicability of this part to 20 CFR part 802.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Applicability of this part to 20 CFR part 802. 801.3 Section 801.3 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR ESTABLISHMENT AND OPERATION OF THE BOARD Introductory § 801.3 Applicability of this part to 20 CFR part 802. Part 802 of...

  16. Vulnerability and adaptation to climate change in the Comoe River Basin (West Africa).

    PubMed

    Yéo, Wonnan Eugène; Goula, Bi Tié Albert; Diekkrüger, Bernd; Afouda, Abel

    2016-01-01

    Climate change is impacting water users in many sectors: water supply, farming, industry, hydropower, fishing, housing, navigation and health. Existing situations, like population growth, movement of populations from rural to urban areas, poverty and pollution can aggravate the impacts of climate change. The aim of the study is to evaluate the vulnerability of different water user groups to climate change and define communities' adaptation strategies in the Comoe River Basin. Information was collected on communities' concerns and perception on changes in climate and potential adaptation measures and strategies. Results show that 95 % of the sample in the study communities had heard of it and are aware that climate change is occurring. They have been experiencing changes in economic activity and cropping pattern, reduced water level in rivers, crop failure, delay in cropping season, new pests and diseases, food insecurity, drop in income and decline in crop yield. Results also show that communities employ various adaptation strategies including crops diversification, substitution and calendar redefinition, agroforestry, borrowing from friends and money lenders and increasing fertilizer application. PMID:27386296

  17. 49 CFR Appendix to Part 10 - Exemptions

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Exemptions Appendix to Part 10 Transportation Office of the Secretary of Transportation MAINTENANCE OF AND ACCESS TO RECORDS PERTAINING TO INDIVIDUALS Pt. 10, App. Appendix to Part 10—Exemptions Part I. General Exemptions Those portions of the following systems of records that consist of...

  18. Parts, Cavities, and Object Representation in Infancy

    ERIC Educational Resources Information Center

    Hayden, Angela; Bhatt, Ramesh S.; Kangas, Ashley; Zieber, Nicole

    2011-01-01

    Part representation is not only critical to object perception but also plays a key role in a number of basic visual cognition functions, such as figure-ground segregation, allocation of attention, and memory for shapes. Yet, virtually nothing is known about the development of part representation. If parts are fundamental components of object shape…

  19. 49 CFR Appendix to Part 10 - Exemptions

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Exemptions Appendix to Part 10 Transportation Office of the Secretary of Transportation MAINTENANCE OF AND ACCESS TO RECORDS PERTAINING TO INDIVIDUALS Pt. 10, App. Appendix to Part 10—Exemptions Part I. General Exemptions Those portions of the following systems of records that consist of...

  20. Some Aspects of Part-Time Work.

    ERIC Educational Resources Information Center

    Australian Dept. of Labour and National Service, Melbourne. Women's Bureau.

    Of major importance to many married women seeking employment in Australia is the availability of part-time work. To describe the economic aspects of part-time employment for women, a review was made of statistics published by the Commonwealth Bureau of Census and Statistics and of research on part-time employment in overseas countries, and a…

  1. Legislation and Part-Time Employment.

    ERIC Educational Resources Information Center

    Petersen, Allan L.; And Others

    This document presents an analysis of part-time employment issues in California community colleges, including a review of historical developments of the law covering the employment of certificated personnel, a review of some benefits and problems associated with part-time teaching, and consideration of part-time faculty employment as a major issue…

  2. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... Part 18 of Subchapter D of this chapter (Bureau of Mines Schedule 2, revised, the current revision of... opening (including electric-drive units with their controls and push buttons) are not required to...

  3. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... Part 18 of Subchapter D of this chapter (Bureau of Mines Schedule 2, revised, the current revision of... opening (including electric-drive units with their controls and push buttons) are not required to...

  4. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... Part 18 of Subchapter D of this chapter (Bureau of Mines Schedule 2, revised, the current revision of... opening (including electric-drive units with their controls and push buttons) are not required to...

  5. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... Part 18 of Subchapter D of this chapter (Bureau of Mines Schedule 2, revised, the current revision of... opening (including electric-drive units with their controls and push buttons) are not required to...

  6. 30 CFR 33.38 - Electrical parts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... § 33.38 Electrical parts. (a) Units with electrical parts and designed to operate as electric face... Part 18 of Subchapter D of this chapter (Bureau of Mines Schedule 2, revised, the current revision of... opening (including electric-drive units with their controls and push buttons) are not required to...

  7. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  8. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  9. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  10. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  11. 7 CFR 1206.14 - Part.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.14 Part. Part means part 1206 which includes the Mango Promotion, Research, and Information Order and all rules, regulations, and...

  12. Part C Updates. 10th Edition

    ERIC Educational Resources Information Center

    Goode, Sue; Lazara, Alex; Danaher, Joan

    2008-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the tenth volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  13. Saturated Vapour Pressure and Refrigeration - Part I

    ERIC Educational Resources Information Center

    Bunker, C. A.

    1973-01-01

    The first part of a two-part article describes an experimental approach that can be used in teaching the concept of saturated vapour pressure. This leads to a discussion of refrigeration cycles in the second part of the article. (JR)

  14. 40 CFR Appendix - Tables to Part 132

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Tables to Part 132 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM Application of part 132 requirements in Great Lakes States and Tribes. Pt. 132, Tables Tables to Part 132 Table 1—Acute Water...

  15. Part C Updates. 11th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2010-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the eleventh volume in a series of compilations, which included two editions of Part H Updates, the former name of the program.…

  16. Telescópio de pequeno porte como suporte ao ensino em cidades com intensa poluição luminosa II

    NASA Astrophysics Data System (ADS)

    Pereira, P. C. R.; Santos-Júnior, J. M.; Cruz, W. S.

    2003-08-01

    Para a maioria dos estudantes, sua passagem pelo ensino formal fundamental envolve a transmissão de fatos que devem ser guardados para um exame, a habilidade para lembrar fórmulas e, eventualmente, a repetição de experimentos que devem produzir resultados exigidos pelo professor. O resultado deste modelo de ensino, ao longo dos anos, é conhecido por todos: desconhecimento e descontentamento, por parte dos estudantes, de temas relativos ao papel e aos processos da ciência. Acreditamos que a Astronomia, pelo seu caráter observacional, é uma das áreas do conhecimento que pode contribuir neste cenário. A Fundação Planetário da Cidade do Rio de Janeiro possui um telescópio Meade LX-200 (25cm) que, juntamente com as câmeras CCD ST-7E e ST8E, tem sido utilizado em projetos voltados aos estudantes do ensino médio desde o ano 2000. Tais projetos envolvem a condução de um projeto de pesquisa observacional num nível apropriado, e possibilitam o contato com técnicas e novas tecnologias: computador, software para manipulação de dados e gráficos, programas de tratamento e redução de dados, uso de equipamentos óptico-eletrônicos (telescópio e CCD), bem como o processo de aquisição de conhecimento. Dentro da proposta dos anos anteriores, priorizamos projetos de uma noite, ou seja, procuramos trabalhar com fenômenos que apresentem variabilidade com intervalo de recorrência relativamente curto. Em todos os casos, optamos pela fotometria diferencial, que tem se mostrado bastante eficiente para o céu luminoso como o da cidade do Rio de Janeiro. Neste painel, apresentamos alguns dos projetos desenvolvidos no último ano, com 25 estudantes. Apresentamos os resultados da observação da variável pulsante AI Vel (V = 6,6) e da variável cataclísmica FO Aqr (V = 13,5), e do monitoramento do trânsito da lua de Júpiter, Europa, ocorrido em 30 de abril de 2003. As curvas de luz produzidas para as primeiras estão concordantes com as da literatura, assim

  17. "Tanto Necesitamos De Aqui Como Necesitamos De Alla": "Leer Juntas" among Mexican Transnational Mothers and Daughters

    ERIC Educational Resources Information Center

    de la Piedra, Maria Teresa

    2011-01-01

    This paper presents part of the results of a qualitative study about literacy practices of Mexican transnational mothers, who live in and frequently cross the border between two countries (the United States and Mexico). Drawing on sociocultural approaches to literacy and literature on transnationalism, I analyze one practice: "leer juntas"…

  18. Using partial sensor information to orient parts

    SciTech Connect

    Akella, S.; Mason, M.T.

    1999-10-01

    Parts orienting, the process of bringing parts in initially unknown orientations to a goal orientation, is an important aspect of automated assembly. The most common industrial orienting systems are vibratory bowl feeders, which use the shape and mass properties of parts to orient them. Bowl feeders rely on a sequence of mechanical operations and typically do not use sensors. In this paper, the authors describe the use of partial information sensors along with a sequence of pushing operations to eliminate uncertainty in the orientation of parts. The authors characterize the shorter execution lengths of sensor-based plans and show that sensor-based plans are more powerful than sensorless plans in that they can bring a larger class of parts to distinct orientations. The authors characterize the relation among part shape, orientability; and recognizability to identify conditions under which a single plan can orient and recognize multiple part shapes. Although part shape determines the results of the actions and the sensed information, the authors establish that differences in part shape do not always lead to differences in part behavior. The authors show that for any convex polygon, there exists an infinite set of nonsimilar convex polygons that behave identically under linear normal pushes. Furthermore, there exists a infinite set of nonsimilar convex polygons whose behavior cannot be distinguished even with diameter sensing after each push. They authors have implemented several planners and demonstrated generated plans in experiments.

  19. 47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Protection of Part 74 and Part 78 operations... MHz Bands Protection of Incumbent Operations § 27.1133 Protection of Part 74 and Part 78 operations... stations with those licensees. In the event that mutually satisfactory coordination agreements cannot...

  20. 47 CFR 27.1133 - Protection of Part 74 and Part 78 operations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Protection of Part 74 and Part 78 operations... MHz Bands Protection of Incumbent Operations § 27.1133 Protection of Part 74 and Part 78 operations... stations with those licensees. In the event that mutually satisfactory coordination agreements cannot...

  1. 33 CFR Appendix A to Part 385 - Illustrations to Part 385

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Illustrations to Part 385 A Appendix A to Part 385 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY.... A Appendix A to Part 385—Illustrations to Part 385 ER12NO03.000 ER12NO03.001...

  2. 45 CFR Appendix A to Part 1110 - Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 45 Public Welfare 3 2014-10-01 2014-10-01 false Federal Financial Assistance to Which This Part Applies A Appendix A to Part 1110 Public Welfare Regulations Relating to Public Welfare (Continued... Pt. 1110, App. A Appendix A to Part 1110—Federal Financial Assistance to Which This Part Applies...

  3. Machining Thin-Walled Cylindrical Parts

    NASA Technical Reports Server (NTRS)

    Cimbak, Joe; Spagnolo, Jim; Kraus, Dan

    1988-01-01

    Cylindrical walls only few thousandths of inch thick machined accurately and without tears or punctures with aid of beryllium copper mandrel. Chilled so it contracts, then inserted in cylinder. As comes to room temperature, mandrel expands and fits snugly inside cylinder. Will not allow part to slide and provides solid backup to prevent deflection when part machined by grinding wheel. When machining finished, cylinder-and-mandrel assembly inserted in dry ice, mandrel contracts and removed from part.

  4. Clinical Pharmacokinetics: A Simplified Approach, Part 2

    PubMed Central

    Perlin, Elliott; Taylor, Robert E.; Peck, Carl C.

    1986-01-01

    Part 1 of this two-part series in clinical pharmacokinetics (J Natl Med Assoc 1985; 77:475-482) introduced the clinician to the basic principles required for rational therapeutic drug management at the bedside. Practical problems were included that demonstrated how these principles could be put to clinical use. In Part 2 the clinical pharmacology of three commonly used drugs (theophylline, digoxin and gentamicin) are discussed, and practical problems are presented to illustrate the use of their pharmacokinetic profiles. PMID:3783759

  5. Parts Engineering Experiences, Philosophies and Trends

    NASA Technical Reports Server (NTRS)

    Shaw, Harry; Day, John H. (Technical Monitor)

    2000-01-01

    This document is the presentation viewgraphs of the NASA presentations to NASDA, outlining the philosophy and trends of the experiences with engineering parts. Included in the presentations: are (1) the assurance of COTS boards for Space flight, and (2) Peer Review for Ice, Cloud and land Elevation Satellite (ICESat) GPS flight receivers EEE parts. The emphasis is on the methods for qualification of available parts for space flight.

  6. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543...

  7. Culture and Literacy. Part 1: A Historic Overview. Part 2: The Needs of a Pluralistic Society. Part 3: Student Perceptions.

    ERIC Educational Resources Information Center

    Masters, Billie Nave

    This three-part series of articles discusses restructuring U.S. public education to meet the needs of culturally diverse student populations. Part 1 presents a historic overview of the philosophies and attitudes underlying delivery of U.S. public education. The American school system is slow to change and, for the benefit of the industrialized…

  8. NASA Electronic Parts and Packaging Program

    NASA Technical Reports Server (NTRS)

    Kayali, Sammy

    2000-01-01

    NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

  9. Metallic parts fabrication using the SIS process

    NASA Astrophysics Data System (ADS)

    Mojdeh, Mehdi

    Since early 1980s, quite a few techniques of Rapid Prototyping (RP), also known as Layered Manufacturing, have been developed. By building three-dimensional parts in a layer-by-layer additive manner, these techniques allow freeform fabrication of parts of complex geometry. Despite recent advances in fabrication of polymer parts, most of the existing rapid prototyping processes are still not capable of fabrication of accurate metallic parts with acceptable mechanical properties. Insufficient dimensional accuracy, limited number of materials, proper mechanical properties, required post machining and lack of repeatability between builds have greatly limited the market penetration of these techniques. This dissertation presents an innovative layered manufacturing technique for fabrication of dense metallic parts called Selective Inhibition Sintering (SIS), developed at the University of Southern California. The SIS-Metal technology adapts RP capabilities and extends them to the field of fabrication of metallic parts for a variety of applications such as tooling and low volume production. Using this process, a metallic part, with varying 3 dimensional geometries, can be automatically constructed from a wide range of materials. SIS-Metal is the only RP process which is suitable for fabrication of dense, complex shaped, accurate objects using a variety of materials. In the SIS-Metal process a metallic part is built layer by layer by deposition for each layer of an inhibitor material which defines the corresponding layer boundary and then filling the voids of the created geometry with metal powder; and compacting the layer formed to reach a high powder density. The resulting green part is then sintered in a furnace to yield the final functional part. In this research different inhibition techniques were explored and a series of single and multi layer parts was fabricated using the most promising inhibition technique, namely, macro-mechanical inhibition. Dimensional

  10. Reliability and quality EEE parts issues

    NASA Technical Reports Server (NTRS)

    Barney, Dan; Feigenbaum, Irwin

    1990-01-01

    NASA policy and procedures are established which govern the selection, testing, and application of electrical, electronic, and electromechanical (EEE) parts. Recent advances in the state-of-the-art of electronic parts and associated technologies can significantly impact the electronic designs and reliability of NASA space transportation avionics. Significant issues that result from these advances are examined, including: recent advances in microelectronics technology (as applied to or considered for use in NASA projects); electron packaging technology advances (concurrent with, and as a result of, the development of the advanced microelectronic devices); availability of parts used in space avionics; and standardization and integration of parts activities between projects, centers, and contractors.

  11. Rotor instability due to loose rotating part

    NASA Technical Reports Server (NTRS)

    Muszynska, A.

    1985-01-01

    Loosening of a rotating part from its fixed position on the shaft or a part of the stator which comes loose and begins to turn with the rotor very frequently represents machinery malfunction. The loose part becomes involved in rotative motion mostly due to dry or fluid friction, and thus its motion is very erratic. The loose part can also move axially along the shaft. Detachment of the rotating part causes changes in the rotor balance state. Most often this results in higher unbalance. During steady-state operation the effect of a loose rotating part can manifest itself through heat vibration. It can be diagnosed by observing periodic changes of amplitude and phase of the synchronous response. During start-up (or shutdown) a loose rotating part carrying some amount of unbalance may manifest its dynamic action in the form of subsynchronous vibrations, very similar to those of other instabilities. The objective of this demonstration is to observe the effect of a loose rotating part (fixed, however, in the axial direction) under both steady-state (rotor constant speed) and transient (rotor start-up or shutdown) operation. The dynamic response depends very much on the amount of damping in the system: lubrication of the loose part/shaft surfaces and addition/elimination of aerodynamic drag blades, mounted on the loose disk, significantly change the rotor response.

  12. Opportunistic replacement of fusion power system parts

    SciTech Connect

    Day, J.A.; George, L.L.

    1981-10-26

    This paper describes a maintenance problem in a fusion power plant. The problem is to specify which life limited parts should be replaced when there is an opportunity. The objective is to minimize the cost rate of replacement parts and of maintenance actions while satisfying a power plant availability constraint. The maintenance policy is to look ahead and replace all parts that will reach their life limits within a time called a screen. Longer screens yield greater system availabilities because more parts are replaced prior to their life limits.

  13. Catalytic functionalities of supported sulfides. I. Effect of support and additives on the CoMo catalyst

    SciTech Connect

    Muralidhar, G.; Massoth, F.E.; Shabtai, J.

    1984-01-01

    C-S hydrogenolysis (HDS) of thiophene, hydrogenation (HYD) of 1-hexene, and hydrocracking (HCG) of 2,4,4-trimethyl-1-pentene, were used as separate model test reactions to differentiate and assess the catalytic functionalities of sulfided CoMo catalysts, and their dependence on the nature of the support and incorporation of additives. Rate constants and relative catalyst activities for these three reaction types were determined. HDS and HYD activities of CoMo supported on different types of Al/sub 2/O/sub 3/ were higher, while the HCG activity was lower compared with CoMo supported on SiO/sub 2/-Al/sub 2/O/sub 3/, SiO/sub 2/-MgO, or TiO/sub 2/. For SiO/sub 2/-Al/sub 2/O/sub 3/ supports both HDS and HYD activities decreased with increase in SiO/sub 2/ content from 10 to 75%, while HCG activity showed the opposite trend. Additives to a finished CoMo catalyst at 0.5% level caused variations in HDS and HCG activities, while HYD was essentially unaffected. HDS was promoted by NH/sub 4/HF/sub 2/ and NH/sub 4/Cl, but depressed by NaNO/sub 3/, Ca(NO/sub 3/)/sub 2/, and H/sub 3/BO/sub 3/. HCG was promoted by NH/sub 4/HF/sub 2/, NH/sub 4/Cl, and H/sub 3/BO/sub 3/. Additives at 5% level, prior to or after CoMo impregnation, showed a strong depressing effect on HDS and a lesser effect on HYD, while HCG was strongly promoted by NH/sub 4/HF/sub 2/, Ti isopropoxide, and H/sub 3/BO/sub 3/. The changes in catalytic functionalities are rationalized in terms of different interactions between CoMo phase, support, and additives. 3 tables, 1 figure.

  14. Method of forming and assembly of metal parts and ceramic parts

    DOEpatents

    Ripley, Edward B.

    2011-11-22

    A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  15. DIABETES MELLITUS COMO FACTOR DE RIESGO DE DEMENCIA EN LA POBLACIÓN ADULTA MAYOR MEXICANA

    PubMed Central

    Silvia, Mejía-Arango; Clemente, y Zúñiga-Gil

    2012-01-01

    Introduccion La diabetes mellitus y las demencias constituyen dos problemas crecientes de salud entre la población adulta mayor del mundo y en particular de los paises en desarrollo. Hacen falta estudios longitudinales sobre el papel de la diabetes como factor de riesgo para demencia. Objetivo Determinar el riesgo de demencia en sujetos Mexicanos con diabetes mellitus tipo 2. Materiales y Metodos Los sujetos diabéticos libres de demencia pertenecientes al Estudio Nacional de Salud y Envejecimiento en México fueron evaluados a los dos años de la línea de base. Se estudió el papel de los factores sociodemográficos, de otras comorbilidades y del tipo de tratamiento en la conversión a demencia. Resultados Durante la línea de base 749 sujetos (13.8%) tuvieron diabetes. El riesgo de desarrollar demencia en estos individuos fue el doble (RR, 2.08 IC 95%, 1.59–2.73). Se encontró un riesgo mayor en individuos de 80 años y más (RR 2.44 IC 95%, 1.46–4.08), en los hombres (RR, 2.25 IC 95%, 1.46–3.49) y en sujetos con nivel educativo menor de 7 años. El estar bajo tratamiento con insulina incrementó el riesgo de demencia (RR, 2.83, IC 95%, 1.58–5.06). Las otras comorbilidades que aumentaron el riesgo de demencia en los pacientes diabéticos fueron la hipertensión (RR, 2.75, IC 95%, 1.86–4.06) y la depresión (RR, 3.78, 95% IC 2.37–6.04). Conclusión Los sujetos con diabetes mellitus tienen un riesgo mayor de desarrollar demencia, La baja escolaridad y otras comorbilidades altamente prevalentes en la población Mexicana contribuyen a la asociación diabetes-demencia. PMID:21948010

  16. Metrology of Large Parts. Chapter 5

    NASA Technical Reports Server (NTRS)

    Stahl, H. Philip

    2012-01-01

    As discussed in the first chapter of this book, there are many different methods to measure a part using optical technology. Chapter 2 discussed the use of machine vision to measure macroscopic features such as length and position, which was extended to the use of interferometry as a linear measurement tool in chapter 3, and laser or other trackers to find the relation of key points on large parts in chapter 4. This chapter looks at measuring large parts to optical tolerances in the sub-micron range using interferometry, ranging, and optical tools discussed in the previous chapters. The purpose of this chapter is not to discuss specific metrology tools (such as interferometers or gauges), but to describe a systems engineering approach to testing large parts. Issues such as material warpage and temperature drifts that may be insignificant when measuring a part to micron levels under a microscope, as will be discussed in later chapters, can prove to be very important when making the same measurement over a larger part. In this chapter, we will define a set of guiding principles for successfully overcoming these challenges and illustrate the application of these principles with real world examples. While these examples are drawn from specific large optical testing applications, they inform the problems associated with testing any large part to optical tolerances. Manufacturing today relies on micrometer level part performance. Fields such as energy and transportation are demanding higher tolerances to provide increased efficiencies and fuel savings. By looking at how the optics industry approaches sub-micrometer metrology, one can gain a better understanding of the metrology challenges for any larger part specified to micrometer tolerances. Testing large parts, whether optical components or precision structures, to optical tolerances is just like testing small parts, only harder. Identical with what one does for small parts, a metrologist tests large parts and optics

  17. Introduction to Algebra (Part 2). Preliminary Edition.

    ERIC Educational Resources Information Center

    Haag, V. H.; And Others

    This is part two of a two-part SMSG algebra text for ninth-grade students. The text was written for those students whose mathematical talent is underdeveloped. Chapter topics include the real numbers, addition of real numbers, multiplication of real numbers, properties of order, and subtraction and division for real numbers. (MP)

  18. Body Parts and Early-Learned Verbs

    ERIC Educational Resources Information Center

    Maouene, Josita; Hidaka, Shohei; Smith, Linda B.

    2008-01-01

    This article reports the structure of associations among 101 common verbs and body parts. The verbs are those typically learned by children learning English prior to 3 years of age. In a free association task, 50 adults were asked to provide the single body part that came to mind when they thought of each verb. Analyses reveal highly systematic…

  19. Coal-fired power materials - Part II

    SciTech Connect

    Viswanathan, V.; Purgert, R.; Rawls, P.

    2008-09-15

    Part 1 discussed some general consideration in selection of alloys for advanced ultra supercritical (USC) coal-fired power plant boilers. This second part covers results reported by the US project consortium, which has extensively evaluated the steamside oxidation, fireside corrosion, and fabricability of the alloys selected for USC plants. 3 figs.

  20. Part Timers and University Faculty Development.

    ERIC Educational Resources Information Center

    Dick, Robert C.

    The increasing number of part-time faculty, especially in university speech communication departments, appears to provide vital continuity in professional development. There are three kinds of part-time faculty: those with new doctoral degrees who want to teach full time but who cannot find appointments, those who are still active or semiactive…

  1. 23 CFR Parts 1345-1399 - [RESERVED

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false 1345 PARTS 1345-1399 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION UNIFORM CRITERIA FOR STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Administrative Requirements Annual reporting requirements. PARTS 1345-1399...

  2. Part Time Study in Higher Education.

    ERIC Educational Resources Information Center

    Neville, Colin

    This document, which is intended for adults considering enrolling in part-time study in higher education, examines the objectives and experiences of adults who have pursued part-time study in higher education in the United Kingdom. The following reasons why adults return to higher education are discussed: personal development; self-fulfillment;…

  3. PARTS: (Plasma Accelerated Reusable Transport System)

    NASA Astrophysics Data System (ADS)

    Aherne, Michael; Davis, Phil; England, Matt; Gustavsson, Jake; Pankow, Steve; Sampaio, Chere; Savella, Phil

    2002-01-01

    The Plasma Accelerated Reusable Transport System (PARTS) is an unmanned cargo shuttle intended to ferry large payloads to and from Martian orbit using a highly efficient VAriable Specific Impulse Magnetoplasma Rocket (VASIMR). The design of PARTS focuses on balancing cost and minimizing transit time for a chosen payload consisting of vehicles, satellites, and other components provided by interested parties.

  4. Part-Time Faculty Handbook: Jefferson College.

    ERIC Educational Resources Information Center

    Jefferson Coll., Hillsboro, MO.

    Designed for part-time faculty at Jefferson College, this handbook answers questions regarding institutional policies and procedures and offers tips to help part-time teachers provide the best possible teacher-learner climate, touching upon a wide variety of issues related to adult learners. The first section of the handbook contains practical…

  5. Preliminary Report on Part-Time Faculty.

    ERIC Educational Resources Information Center

    California Community Colleges, Sacramento.

    This report summarizes survey data on part-time faculty utilization in California community colleges. Data was received from 67 of the 69 community college districts. The primary purpose of the survey was to obtain information that would be useful to community college boards and administrators in dealing with part-time faculty legislation. Tables…

  6. A Theory of Intellectual Development: Part 1.

    ERIC Educational Resources Information Center

    Confrey, Jere

    1994-01-01

    Part 1 of a three-part article analyzing radical constructivism (as one interpretation of Piaget) and the socio-cultural perspective (as one interpretation of Vygotsky), including major principles, primary contributions to mathematics education, and potential limitations. Introduces an integration of the two theories through a feminist…

  7. [Basic lung ultrasound. Part 2. Parenchymal diseases].

    PubMed

    de la Quintana Gordon, F B; Nacarino Alcorta, B; Fajardo Pérez, M

    2015-01-01

    In this second part, an analysis is made of the pathology of lung parenchyma. This text is structured into different sections, including the study of atelectasias, pneumonia and abscess, interstitial/alveolar or Blines patterns, and finally an analysis is made of pulmonary embolism. With this second part, the basic knowledge to develop lung ultrasound in the anesthesia department has been presented. PMID:25708093

  8. Project Management; Part 1--The Soft Skills.

    ERIC Educational Resources Information Center

    Bailey, Harold J.; Ergott, Kathleen A.

    1998-01-01

    Presents the first of a three-part series of articles on the life of a project manager. Discussion in Part 1 deals with the people and related skills involved in the project, including: interrelationships between the client, project manager, and executive management; oral, written, and body-language communication forms; and planning and…

  9. 47 CFR Parts 401-499 - [RESERVED

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false 401 PARTS 401-499 Telecommunication NATIONAL TELECOMMUNICATIONS AND INFORMATION ADMINISTRATION, DEPARTMENT OF COMMERCE, AND NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION E-911 GRANT PROGRAM Closeout. PARTS 401-499...

  10. Coping Mechanisms of Part-Time Students

    ERIC Educational Resources Information Center

    Yum, Jessie C. K.; Kember, David; Siaw, Irene

    2005-01-01

    A characteristic shared by the majority of adult students is that they are undertaking part-time study. For these adult learners one of the major difficulties is how to find time for their study. This paper reports the coping mechanisms that part-time adult students adopt to meet the additional demands that study puts on their existing commitments…

  11. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  12. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  13. Search Engines for Tomorrow's Scholars, Part Two

    ERIC Educational Resources Information Center

    Fagan, Jody Condit

    2012-01-01

    This two-part article considers how well some of today's search tools support scholars' work. The first part of the article reviewed Google Scholar and Microsoft Academic Search using a modified version of Carole L. Palmer, Lauren C. Teffeau, and Carrier M. Pirmann's framework (2009). Microsoft Academic Search is a strong contender when…

  14. Part-Time Learners Need Support Too

    ERIC Educational Resources Information Center

    Fazackerley, Anna

    2009-01-01

    In England, part-time students have to pay their fees up-front, they can't take out a government-supported loan, and their chances of securing any financial support are depressingly slim. While all full-time students are entitled to some state support, Parliamentary questions have revealed that nine out of 10 part-time students receive nothing at…

  15. FOUNDATIONS OF THAI. BOOK I, PART 1.

    ERIC Educational Resources Information Center

    ANTHONY, EDWARD M.; AND OTHERS

    THIS BEGINNING TEXT PRESENTS THE ESSENTIALS OF THAI PRONUNCIATION AND GRAMMAR IN A FORMAT GEARED TO REGULAR COLLEGE LANGUAGE COURSE SCHEDULING. THE COURSE CONSISTS OF TWO VOLUMES, BOOK I, PART 1 (LESSONS 1-14) AND BOOK I, PART 2 (LESSONS 15-25), PROVIDING MATERIAL FOR TWO UNIVERSITY SEMESTERS OF CLASSROOM AND LABORATORY WORK. BASED ON A…

  16. Fixture for mounting small parts for processing

    DOEpatents

    Foreman, Larry R.; Gomez, Veronica M.; Thomas, Michael H.

    1990-01-01

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

  17. Core sampling system spare parts assessment

    SciTech Connect

    Walter, E.J.

    1995-04-04

    Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts.

  18. Urban versus Rural: Part-Time Enrollment

    ERIC Educational Resources Information Center

    Copeland, Michael; Tietjen-Smith, Tara; Waller, Lee Rusty; Waller, Sharon Kay

    2008-01-01

    The researchers examined part-time enrollment within public two-year, degree-granting community colleges by the degree of urbanization classifications of city, suburban, town, and rural for fall 2003 and 2005. Findings indicate no statistical differences in part-time enrollment between city and suburban institutions. No statistical differences…

  19. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  20. 49 CFR Appendix - Figures to Part 38

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Figures to Part 38 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY SPECIFICATIONS FOR TRANSPORTATION VEHICLES Other Vehicles and Systems Trams, and similar vehicles, and systems Pt. 38, Figures Figures to Part 38 ER28SE98.000...

  1. 47 CFR Alphabetical Index - Part 74

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Part 74 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... Pt. 74, Index Alphabetical Index—Part 74 A Additional orders by FCC (All Services) 74.28...

  2. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  3. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  4. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  5. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  6. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  7. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  8. 47 CFR Alphabetical Index - Part 74

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Part 74 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... Pt. 74, Index Alphabetical Index—Part 74 A Additional orders by FCC (All Services) 74.28...

  9. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  10. 47 CFR Alphabetical Index - Part 78

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Part 78 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations Modulation limits. Pt. 78, Index Alphabetical Index—Part 78 A...

  11. 47 CFR Alphabetical Index - Part 74

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Part 74 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... Pt. 74, Index Alphabetical Index—Part 74 A Additional orders by FCC (All Services) 74.28...

  12. 47 CFR Alphabetical Index - Part 76

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Part 76 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND..., Index Alphabetical Index—Part 76 A A and B grade contours 76.5 Access, Channel enforcement 76.10...

  13. 47 CFR Alphabetical Index - Part 74

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Part 74 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... Pt. 74, Index Alphabetical Index—Part 74 A Additional orders by FCC (All Services) 74.28...

  14. 47 CFR Alphabetical Index - Part 74

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Part 74 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... Pt. 74, Index Alphabetical Index—Part 74 A Additional orders by FCC (All Services) 74.28...

  15. 47 CFR Alphabetical Index - Part 73

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Part 73 Index Alphabetical Index Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Incorporated Standards Incorporation by reference. Pt. 73, Index Alphabetical Index—Part 73 Rules Apply to All Services, AM, FM, and TV,...

  16. First Degrees by Part-Time Study.

    ERIC Educational Resources Information Center

    Styler, W. E.

    Degrees granted for part-time study are minimal in Britain and have been mainly awarded by London University. A small amount of part-time degree work is also carried on by Goldsmiths' College, West Ham College of Technology, and the Universities of Manchester, Durham, and Belfast. The establishment of the National Council for Academic Awards has…

  17. 31 CFR Appendix to Part 346 - Tables

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Tables Appendix to Part 346 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING UNITED STATES INDIVIDUAL RETIREMENT BONDS Pt. 346, App. Appendix to Part...

  18. Actel Parts Usage in GSFC Projects

    NASA Technical Reports Server (NTRS)

    Sahu, Kusum

    2006-01-01

    The purpose of this paper is to provide an overview of the Actel field programmable gate array (FPGA) issues and investigations to date, provide information to GSFC parts engineers on the risks associated with the use of these parts in flight, provide procurement options for their respective projects, and provide general guidance for use of these devices if no other acceptable options exist.

  19. Holistic Processing from Learned Attention to Parts

    PubMed Central

    Chua, Kao-Wei; Richler, Jennifer J.; Gauthier, Isabel

    2016-01-01

    Attention helps us focus on what is most relevant to our goals, and prior work shows that aspects of attention can be learned. Learned inattention to parts can abolish holistic processing of faces, but it is unknown whether learned attention to parts is sufficient to cause a change from part-based to holistic processing with objects. Here, we trained subjects to individuate non-face objects (Greebles) from two categories, Ploks and Glips. Diagnostic information was in complementary halves for the two categories. Holistic processing was then tested with Plok-Glip composites that combined the kind of part that was diagnostic or non-diagnostic during training. Exposure to Greeble parts resulted in general failures of selective attention for non-diagnostic composites, but face-like holistic processing was only observed for diagnostic composites. These results demonstrate a novel link between learned attentional control and the acquisition of holistic processing. PMID:25775049

  20. The Goddard Space Flight Center preferred parts list, revision A

    NASA Technical Reports Server (NTRS)

    Tyson, N. E. (Editor)

    1982-01-01

    A listing is presented of preferred electronic parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center space systems and ground support equipment.

  1. Tropical forests: a call for action. Part 1: the plan. Part 2: case studies. Part 3: country investment profiles

    SciTech Connect

    Not Available

    1985-10-01

    The World Resources Institute (WRI), in cooperation with multi- and bi-lateral organizations, has launched a major initiative to conserve forests in the humid and semiarid/arid areas of developing countries. The 3-part WRI report is a call to political action on this subject. Part 1 describes the high costs exacted by deforestation, but asserts that the process can be arrested and reversed by a partnership of governments, local participants, and development-assistance agencies. Proposals are presented for a 5-year action plan in farm, community, and arid-zone forestry. Parts 2 and 3 include case studies of the successful projects listed in Part 1 and 5-year investment profiles of 56 developing countries affected by deforestation.

  2. Spatial part-set cuing facilitation.

    PubMed

    Kelley, Matthew R; Parasiuk, Yuri; Salgado-Benz, Jennifer; Crocco, Megan

    2016-07-01

    Cole, Reysen, and Kelley [2013. Part-set cuing facilitation for spatial information. Journal of Experimental Psychology: Learning, Memory, & Cognition, 39, 1615-1620] reported robust part-set cuing facilitation for spatial information using snap circuits (a colour-coded electronics kit designed for children to create rudimentary circuit boards). In contrast, Drinkwater, Dagnall, and Parker [2006. Effects of part-set cuing on experienced and novice chess players' reconstruction of a typical chess midgame position. Perceptual and Motor Skills, 102(3), 645-653] and Watkins, Schwartz, and Lane [1984. Does part-set cuing test for memory organization? Evidence from reconstructions of chess positions. Canadian Journal of Psychology/Revue Canadienne de Psychologie, 38(3), 498-503] showed no influence of part-set cuing for spatial information when using chess boards. One key difference between the two procedures was that the snap circuit stimuli were explicitly connected to one another, whereas chess pieces were not. Two experiments examined the effects of connection type (connected vs. unconnected) and cue type (cued vs. uncued) on memory for spatial information. Using chess boards (Experiment 1) and snap circuits (Experiment 2), part-set cuing facilitation only occurred when the stimuli were explicitly connected; there was no influence of cuing with unconnected stimuli. These results are potentially consistent with the retrieval strategy disruption hypothesis, as well as the two- and three-mechanism accounts of part-set cuing. PMID:26252760

  3. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  4. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  5. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted In-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II...-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 Manufacturers... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT...

  6. Understanding and managing burn pain: Part 2.

    PubMed

    Connor-Ballard, Patricia A

    2009-05-01

    Despite advances in treatment of burn injuries and their consequent pain, wound care is the main source of the pain associated with burn injury. This two-part article explores burn pain and its treatment from a nursing perspective. Last month, Part 1 provided an overview of burn injury and addressed the wound care-related causes of burn pain, as well as its assessment and treatment. Part 2, presented here, provides a more in-depth discussion of pain management; topical medications and the psychological aspects of burn pain are also discussed. PMID:19411907

  7. 37 CFR 41.11 - Ex Parte communications in inter partes proceedings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE PRACTICE BEFORE THE PATENT TRIAL AND APPEAL BOARD General... inter partes reexamination (subpart C of this part) or about a contested case (subparts D and E of...

  8. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42 CFR part 1003; 42 CFR part 1005. 2. Appeals of exclusions from Medicare and State health care programs and...), (b)(5)(C); 1395u(j)(2), (k), (l)(3), (m)(3), (n)(3), (p)(3)(B) 42 CFR part 1001; 42 CFR part 1005....

  9. 45 CFR Appendix A to Part 13 - Appendix A to Part 13

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...); 1395bbb(c)(1); 1396b(m)(5)(B); 1396r(b)(3)(B)(ii), (g)(2)(A)(i); 1396t(i)(3); 11131(c); 11137(b)(2) 42 CFR part 1003; 42 CFR part 1005. 2. Appeals of exclusions from Medicare and State health care programs and...), (b)(5)(C); 1395u(j)(2), (k), (l )(3), (m)(3), (n)(3), (p)(3)(B) 42 CFR part 1001; 42 CFR part 1005....

  10. Jeremy Bentham's essay on "Paederasty". Part 2.

    PubMed

    Crompton, L

    1978-01-01

    This is Part 2 of a transcription of Bentham's manuscript essay on "Paederasty" (1785), Part 1 of which appeared in Vol. 3, No. 4. In Part 1 Bentham argued for the decriminalization of sodomy and opposed the theories of Montesquieu and Voltaire as to its social dangers. In Part 2 Bentham speculates on its causes and alleges that the real reason such behavior is so severely punished is an irrational "antipathy" to pleasure generally and to sexual pleasure in particular. He discusses the danger of blackmail and false accusations and the punishment of lesbian acts, bestiality, and masturbation. Some miscellaneous related notes by Bentham are appended: these deal with religious fears based on the destruction of Sodom, the threat to population, the harshness of English naval law, and other topics. PMID:363935

  11. Behaviourally Defined Objectives: A Critique. Part Two.

    ERIC Educational Resources Information Center

    Wesson, A. J.

    1983-01-01

    This is the concluding part of an article published in the August 1983 edition. A number of arguments are developed to demonstrate the inadequacy of behaviorally defined objectives as a basis for curriculum planning. (SSH)

  12. Biochemical Engineering. Part II: Process Design

    ERIC Educational Resources Information Center

    Atkinson, B.

    1972-01-01

    Describes types of industrial techniques involving biochemical products, specifying the advantages and disadvantages of batch and continuous processes, and contrasting biochemical and chemical engineering. See SE 506 318 for Part I. (AL)

  13. Fire prevention on airplanes. Part II

    NASA Technical Reports Server (NTRS)

    Sabatier, J

    1929-01-01

    This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

  14. Curing of Furfuryl Alcohol-Impregnated Parts

    NASA Technical Reports Server (NTRS)

    Lawton, J. W.; Brayden, T. H.

    1983-01-01

    Delamination problem in reinforced carbon/carbon parts impregnated with oxalic acid-catalyzed furfuryl alcohol overcome by instituting two additional quality-control tests on alcohol and by changing curing conditions.

  15. Managing EEE part standardisation and procurement

    NASA Astrophysics Data System (ADS)

    Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

    2002-12-01

    This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

  16. California Emerging Technology Forum Part II

    EPA Science Inventory

    The goal of the California Emerging Technology Forum Part II is to foster the removal of barriers for the development and use of clean technologies through the development of collaborative technology research projects on promising technologies. The collaborative technology resear...

  17. Dynamic Breaking Tests of Airplane Parts

    NASA Technical Reports Server (NTRS)

    Hertel, Heinrich

    1933-01-01

    The static stresses of airplane parts, the magnitude of which can be determined with the aid of static load assumptions, are mostly superposed by dynamic stresses, the magnitude of which has been but little explored. The object of the present investigation is to show how the strength of airplane parts can best be tested with respect to dynamic stresses with and without superposed static loading, and to what extent the dynamic strength of the parts depends on their structural design. Experimental apparatus and evaluation methods were developed and tried for the execution of vibration-strength tests with entire structural parts both with and without superposed static loading. Altogether ten metal spars and spar pieces and two wooden spars were subjected to vibration breaking tests.

  18. Plant Parts: Common Scents and Good Taste.

    ERIC Educational Resources Information Center

    Swinehart, Rebecca, Ed.

    1995-01-01

    This activity involves elementary students in an investigation of the usefulness of plant parts as a food source. An introduction discusses the dependence of animal life on plants. Materials needed and step-by-step procedure are provided. (LZ)

  19. Osteoarthritis Basics: The Joint and Its Parts

    MedlinePlus

    ... on. Feature: Osteoarthritis Osteoarthritis Basics: The Joint and Its Parts Past Issues / Winter 2013 Table of Contents ... type of arthritis. More common in older people, it is sometimes called degenerative joint disease. Osteoarthritis most ...

  20. Seaplanes floats and hulls. Part I

    NASA Technical Reports Server (NTRS)

    Herrmann, H

    1927-01-01

    This part of the report presents characteristics and graphic representations of water resistance. The laws of similarity are discussed as well as the theory of model tests. The test procedures and model tests of other countries are also discussed.

  1. The Use and Abuse of Part-Time Faculty: The Part-Timers' Point of View.

    ERIC Educational Resources Information Center

    Wilson, Wendy L.

    Problems faced by part-time faculty members are identified, and suggestions to avoid mistreatment of these teachers are offered. Disadvantages of part-time teaching include the lack of equitable pay and benefits. Since most institutions have a standard pay rate for part-timers, it is suggested that teaching excellence be recognized by creating…

  2. 48 CFR Appendix A to Part 1219 - Appendix A to Part 1219

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Appendix A to Part 1219 A Appendix A to Part 1219 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Pt. 1219, App. A Appendix A to Part 1219 Targeted industry categories* FPDS products and service code...

  3. 24 CFR Appendix A to 24 Cfr Part 3400 - Appendix A to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix A to 24 CFR Part 3400 A Appendix A to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. A Appendix A to 24 CFR Part...

  4. 24 CFR Appendix C to 24 Cfr Part 3400 - Appendix C to 24 CFR Part 3400

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Appendix C to 24 CFR Part 3400 C Appendix C to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. C Appendix C to 24 CFR Part...

  5. 24 CFR Appendix C to 24 Cfr Part 3400 - Appendix C to 24 CFR Part 3400

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Appendix C to 24 CFR Part 3400 C Appendix C to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. C Appendix C to 24 CFR Part...

  6. 24 CFR Appendix C to 24 Cfr Part 3400 - Appendix C to 24 CFR Part 3400

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Appendix C to 24 CFR Part 3400 C Appendix C to 24 CFR Part 3400 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT SAFE MORTGAGE LICENSING ACT Pt. 3400, App. C Appendix C to 24 CFR Part...

  7. 48 CFR Appendix A to Part 2904 - Appendix A to Part 2904

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Appendix A to Part 2904 A Appendix A to Part 2904 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL ADMINISTRATIVE MATTERS Pt. 2904, App. A Appendix A to Part 2904 Title of report Reference Date due Submitted to Report of Proposed Federal Construction* 29...

  8. 49 CFR Appendix B to Part 1580 - Summary of the Applicability of Part 1580

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 9 2011-10-01 2011-10-01 false Summary of the Applicability of Part 1580 B Appendix B to Part 1580 Transportation Other Regulations Relating to Transportation (Continued... RAIL TRANSPORTATION SECURITY Pt. 1580, App. B Appendix B to Part 1580—Summary of the Applicability...

  9. 45 CFR Appendix A to Part 1110 - Federal Financial Assistance to Which This Part Applies

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 3 2011-10-01 2011-10-01 false Federal Financial Assistance to Which This Part Applies A Appendix A to Part 1110 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES GENERAL NONDISCRIMINATION IN FEDERALLY ASSISTED PROGRAMS Pt. 1110, App. A Appendix A to Part...

  10. 16 CFR Figure 3 to Part 1509 - Figure 3 to Part 1509

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Figure 3 to Part 1509 3 Figure 3 to Part 1509 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS Pt. 1509, Fig. 3 Figure 3 to Part 1509 EC03OC91.066...