Science.gov

Sample records for controlling painting activities

  1. Basis for and practical methods of controlling painting activities at the Sequoyah Nuclear Plant

    SciTech Connect

    Campbell, R.R.

    1997-08-01

    Sequoyah Nuclear Plant (SQN) follows the guidance presented in Regulatory Guide (R.G.) 1.52, {open_quotes}Design, Testing, and Maintenance Criteria for Atmospheric Cleanup System Air Filtration and Adsorption System Units of Light-Water-Cooled Nuclear Power Plants{close_quotes} in protecting its charcoal filter trains from the effects of painting and other chemical releases. SQN, as well as other nuclear facilities around the country, have the problem of how to address the issue of protection of Engineered Safety Feature (ESF) filter systems from degradation due to communication with airborne hydrocarbons (i.e., primarily paints and solvents). R.G. 1.52 (and a similar statement from R.G. 1.140) states in part,{open_quotes}Testing should be performed ... following painting, fire, or chemical release in any ventilation zone communicating with the system...,{close_quotes} and requires that a test be performed upon any kind of painting or chemical release. This is considered overly restrictive if the activity is minor and in a location remote from the charcoal filters. Charcoal filters used in air cleaning systems are required to filter out radioactive iodine from an airstream before its release from the plant to the environment. Charcoal filters will age with time because of their ability to adsorb many different types of material. This aging affects the charcoal by lowering its iodine retention efficiency, and therefore the charcoal needs to be protected from the effects of chemicals such as paint fumes. 14 refs., 3 tabs.

  2. 40 CFR 745.233 - Lead-based paint activities requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.233 Lead-based paint activities requirements. Lead-based paint... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Lead-based paint...

  3. 40 CFR 745.233 - Lead-based paint activities requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.233 Lead-based paint activities requirements. Lead-based paint... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Lead-based paint...

  4. 40 CFR 745.233 - Lead-based paint activities requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.233 Lead-based paint activities requirements. Lead-based paint... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Lead-based paint...

  5. 40 CFR 745.233 - Lead-based paint activities requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.233 Lead-based paint activities requirements. Lead-based paint... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Lead-based paint...

  6. 40 CFR 745.230 - Work practice standards for conducting lead-based paint activities: public and commercial...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.230 Work practice standards for conducting lead-based paint activities: public and... lead-based paint activities: public and commercial buildings, bridges and superstructures....

  7. 40 CFR 745.229 - Certification of individuals and firms engaged in lead-based paint activities: public and...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.229 Certification of individuals and firms engaged in lead-based paint activities... engaged in lead-based paint activities: public and commercial buildings, bridges and superstructures....

  8. 40 CFR 745.230 - Work practice standards for conducting lead-based paint activities: public and commercial...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.230 Work practice standards for conducting lead-based paint activities: public and... lead-based paint activities: public and commercial buildings, bridges and superstructures....

  9. 40 CFR 745.325 - Lead-based paint activities: State and Tribal program requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and Indian Tribal Programs § 745.325 Lead-based paint activities: State and... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Lead-based paint activities: State...

  10. 40 CFR 745.325 - Lead-based paint activities: State and Tribal program requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and Indian Tribal Programs § 745.325 Lead-based paint activities: State and... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Lead-based paint activities: State...

  11. 40 CFR 745.233 - Lead-based paint activities requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Lead-based paint activities requirements. 745.233 Section 745.233 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.233...

  12. 40 CFR 745.325 - Lead-based paint activities: State and Tribal program requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and Indian Tribal Programs § 745.325 Lead-based paint activities: State and... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Lead-based paint activities: State...

  13. 40 CFR 745.325 - Lead-based paint activities: State and Tribal program requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and Indian Tribal Programs § 745.325 Lead-based paint activities: State and... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Lead-based paint activities: State...

  14. Radiation Induced Degradation of White Thermal Control Paint

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, Jason A.; Kamenetzky, Rachel R.; Finckenor, M. M.; Meshishnek, M. J.

    1999-01-01

    This paper details a comparison analysis of the zinc-oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 yr in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent Sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  15. Radiation Induced Degradation of White Thermal Control Paint

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, J. A.; Kamenetzky, R. R.; Finckenor, M. M.; Meshishnek, M. J.

    1998-01-01

    This paper details a comparison analysis of the Zinc Oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuum reflectance technique. The dose applied to the paints was approximately equivalent to 5 years in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuum reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectanc6 recovery after an additional 190 Equivalent Sun Hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  16. Radiation Induced Degradation of White Thermal Control Paint

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, Jason A.; Kamenetzky, Rachel R.; Finckenor, M. M.; Meshishnek, M. J.

    1998-01-01

    This paper details a comparison analysis of the zinc-oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 yr in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent Sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  17. Automating and controlling dry paint stripping

    NASA Astrophysics Data System (ADS)

    Cunliffe, F. R., III

    1989-03-01

    The key parameters which affect the efficiency and success of the dry paint-stripping process are discussed, including pressure at the nozzle, the size of the nozzle, the angle of blasting, the distance from the work-piece, the hardness and the size of the media, and the media flow. It is pointed out that, by automating the dry paint stripping process, many of these parameters can be controlled, making it possible to reproduce the same result, time and again. Attention is given to a recently developed automated aircraft wheel stripping machine, whose units are operated by joy stick controls from outside the cabinet. The wheel can be rotated and moved forward and backward in order to gain access to all of the surfaces; the operator also controls the nozzle manipulator which is a five-axis unit. At present, robotic systems are being developed for small aircraft and for the jumbo jets in use throughout the commercial airline fleets of the world.

  18. 40 CFR 745.325 - Lead-based paint activities: State and Tribal program requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Lead-based paint activities: State and Tribal program requirements. 745.325 Section 745.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and Indian...

  19. 40 CFR 745.238 - Fees for accreditation and certification of lead-based paint activities.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Fees for accreditation and certification of lead-based paint activities. 745.238 Section 745.238 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based...

  20. Difference in brain activations during appreciating paintings and photographic analogs

    PubMed Central

    Mizokami, Yoshinori; Terao, Takeshi; Hatano, Koji; Hoaki, Nobuhiko; Kohno, Kentaro; Araki, Yasuo; Kodama, Kensuke; Makino, Mayu; Izumi, Toshihiko; Shimomura, Tsuyoshi; Fujiki, Minoru; Kochiyama, Takanori

    2014-01-01

    Several studies have investigated neural correlates of aesthetic appreciation for paintings but to date the findings have been heterogeneous. This heterogeneity may be attributed to previous studies’ measurement of aesthetic appreciation of not only the beauty of paintings but also the beauty of motifs of the paintings. In order to better elucidate the beauty of paintings, it seems necessary to compare aesthetic appreciation of paintings and photographic analogs which included corresponding real images. We prepared for famous painters’ pictures and their photographic analogs which were set up to resemble each painting in order to investigate the hypothesis that there exist specific neural correlates associated with the aesthetic appreciation for paintings. Forty-four subjects participated in functional magnetic resonance study which required comparisons of aesthetic appreciation of paintings of still life and landscape versus photographic analogs including corresponding real images of still life and landscape. Bilateral cuneus and the left lingual gyrus were activated in the comparison of aesthetic appreciation of paintings versus photographic analogs. In conclusion, the present findings suggest a possibility of the existence of specific neural correlates associated with the aesthetic appreciation for paintings and that bilateral cuneus and the left lingual gyrus may be involved. PMID:25071508

  1. Intelligent control of robotic paint stripping using color vision feedback

    NASA Astrophysics Data System (ADS)

    Harvey, D. N.; Rogers, T. W.

    1993-08-01

    The paper describes a color-based machine vision system which is capable of functioning as a real-time process control system for a robotic work cell currently being developed for stripping paint from both large and small aircraft. The system is based on hue, saturation, and intensity representation of the image data and on rapid analysis techniques and is capable of differentiating between painted, primed, stripped, and roughened aircraft surfaces. These techniques were tested on a large number of aircraft paint schemes under actual stripping conditions, and were found to be fast and robust enough for real-time process control.

  2. Body painting to promote self-active learning of hand anatomy for preclinical medical students

    PubMed Central

    Jariyapong, Pitchanee; Punsawad, Chuchard; Bunratsami, Suchirat; Kongthong, Paranyu

    2016-01-01

    Background The purpose of this study was to use the body painting method to teach hand anatomy to a group of preclinical medical students. Methods Students reviewed hand anatomy using the traditional method and body painting exercise. Feedback and retention of the anatomy-related information were examined by a questionnaire and multiple-choice questions, respectively, immediately and 1 month after the painting exercise. Results Students agreed that the exercise was advantageous and helped facilitate self-active learning after in-class anatomy lessons. While there was no significant difference in knowledge retention between the control and experimental groups, the students appreciated the exercise in which they applied body paint to the human body to learn anatomy. Conclusion The body painting was an efficient tool for aiding the interactive learning of medical students and increasing the understanding of gross anatomy. PMID:26945229

  3. 18. LAUNCH CONTROL SUPPORT BUILDING. 'MISSILE ART' MURAL PAINTED ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. LAUNCH CONTROL SUPPORT BUILDING. 'MISSILE ART' MURAL PAINTED ON INTERIOR WALL OF ELEVATOR SHAFT. VIEW TO EAST. - Minuteman III ICBM Launch Control Facility November-1, 1.5 miles North of New Raymer & State Highway 14, New Raymer, Weld County, CO

  4. 40 CFR 745.230 - Work practice standards for conducting lead-based paint activities: public and commercial...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Work practice standards for conducting lead-based paint activities: public and commercial buildings, bridges and superstructures. 745.230 Section 745.230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT...

  5. 40 CFR 745.226 - Certification of individuals and firms engaged in lead-based paint activities: target housing and...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Certification of individuals and firms engaged in lead-based paint activities: target housing and child-occupied facilities. 745.226 Section 745.226 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION...

  6. 75 FR 51808 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-23

    ... April 22, 2008, (73 FR 21692), EPA promulgated final TSCA section 402(c)(3) regulations governing... Program are found in R23-24.6-PB-Section 14.0 of the Rhode Island Rules and Regulations For Lead Poisoning... AGENCY Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child...

  7. 75 FR 6383 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-09

    ... Exposure Reduction. In the Federal Register dated April 22, 2008, (73 FR 21692), EPA promulgated final TSCA... dust sampling technicians. In the Federal Register of June 1, 1998, (63 FR 29908), EPA promulgated... AGENCY Lead-Based Paint Renovation, Repair and Painting, and Pre- Renovation Education Activities...

  8. 75 FR 13127 - Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... Exposure Reduction. In the Federal Register dated April 22, 2008 (73 FR 21692), EPA promulgated final TSCA... AGENCY Lead-Based Paint Renovation, Repair and Painting Activities in Target Housing and Child Occupied... Action Apply to Me? This action is directed to the public in general, to entities offering Lead...

  9. Study of erodable paint properties involved in antifouling activity.

    PubMed

    Thouvenin, M; Langlois, V; Briandet, R; Langlois, J Y; Guerin, P H; Peron, J J; Haras, D; Vallee-Rehel, K

    2003-06-01

    To produce ecological marine paints, it is necessary to understand the phenomena involved in antifouling activity. Due to the multivariable components which have to be taken into account and due to their analytical intricacy, only studies based on selected properties are conceivable. In this study, four properties have been chosen, viz. erosion, biocide release, roughness and the physicochemical characteristics of the film surface. A principal-component analysis (PCA) of the experimental data has shown that, among the selected properties, only erosion affected antifouling efficiency. A more detailed investigation of erosion by quantifying global hydration and hydrolysis of immersed paints revealed the difficulty in linking the chemical structure of binders to the final erosion properties. Biocide release from paints, quantified by chromatographic methods coupled with UV detection, was inferior to the doses stated by the paint producers. These observations allowed the conceiving of formulations with reduced amounts of active molecules. The development of erodable, biodegradable binders associated with non toxic compounds is a promising way to obtain efficient antifouling paints compatible with existing, preventive systems. PMID:14619286

  10. Radiation Induced Degradation of the White Thermal Control Paints Z-93 and Z-93P

    NASA Technical Reports Server (NTRS)

    Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, J. A.; Kamenetzky, R. R.; Finckenor, M. M.; Meshishnek, M. J.

    1996-01-01

    This paper details a comparison analysis of the zinc oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 years in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

  11. Children's Emotion and Behavior In Painting Activities

    ERIC Educational Resources Information Center

    Chen, I-Ju

    2013-01-01

    This study adopted various methods such as qualitative research, observation, interviews, and document collection to examine the emotional responses, behavior changes, and counseling effects on a single-parent child in a skipped-generation family before or after a series of painting activities. The participant was asked to take part in 50-minute…

  12. PAINT COATINGS: CONTROLLED FIELD AND CHAMBER EXPERIMENTS

    EPA Science Inventory

    To determine the impact of pollution levels on the weathering rates of coatings, laboratory chamber experiments and controlled field exposures at North Carolina and Ohio sites were conducted in such a manner to separate the contributions due to dry deposition, wet deposition, pre...

  13. 75 FR 39524 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-09

    ...This notice announces that on May 3, 2010, the State of Oregon was deemed authorized under section 404(a) of the Toxic Substances Control Act (TSCA), 15 U.S.C. 2684(a), to administer and enforce requirements for a renovation, repair and painting program in accordance with section 402(c)(3) of TSCA, 15 U.S.C. 2682(c)(3), and a lead-based paint pre-renovation education program in accordance with......

  14. [About an insecticidal paint for controlling Triatoma infestans, in Bolivia].

    PubMed

    Dias, João Carlos Pinto; Jemmio, A

    2008-01-01

    Preliminary evaluations of an insecticidal paint based on diazinon, chlorpyrifos and pyriproxyfen in a micro-encapsulated formulation (Inesfly 5A IGR) have shown that it has effective and persistent activity against Triatoma infestans inside homes and in areas surrounding homes, in a highly infested region of the Bolivian Chaco. Furthermore, the evaluations have highlighted that the product presents good handling characteristics and gives a good appearance to houses and outhouses that have been treated, and that its acceptance among the population and the local sanitary authorities is excellent. This encourages new investigations and the use of the product on a larger scale and against other vector species for Chagas disease. PMID:18368277

  15. 40 CFR 745.226 - Certification of individuals and firms engaged in lead-based paint activities: target housing and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.226 Certification of individuals and firms engaged in lead-based paint activities: target housing... engaged in lead-based paint activities: target housing and child-occupied facilities. 745.226 Section...

  16. 40 CFR 745.226 - Certification of individuals and firms engaged in lead-based paint activities: target housing and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.226 Certification of individuals and firms engaged in lead-based paint activities: target housing... engaged in lead-based paint activities: target housing and child-occupied facilities. 745.226 Section...

  17. 40 CFR 745.226 - Certification of individuals and firms engaged in lead-based paint activities: target housing and...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.226 Certification of individuals and firms engaged in lead-based paint activities: target housing... engaged in lead-based paint activities: target housing and child-occupied facilities. 745.226 Section...

  18. 40 CFR 745.226 - Certification of individuals and firms engaged in lead-based paint activities: target housing and...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities § 745.226 Certification of individuals and firms engaged in lead-based paint activities: target housing... engaged in lead-based paint activities: target housing and child-occupied facilities. 745.226 Section...

  19. Improvement of photocatalytic activity of silicate paints by removal of K2SO4

    NASA Astrophysics Data System (ADS)

    Tryba, B.; Wrobel, R. J.; Homa, P.; Morawski, A. W.

    2015-08-01

    Some organic and mineral photocatalytic paints produced by Pigment company (Poland) were tested for the decomposition of benzo[a]pyrene (BaP) under UV-Vis. It appeared that latex (LX) and acrylic (IN) paints were more photoactive than mineral (FA and DR) ones. It was concluded that large amount of calcium carbonate and the presence of potassium sulfate in the mineral paints were detrimental for their photocatalytic activity. Potassium sulfate present in the paint formula resulted in the limiting access to the active anatase phase of TiO2. However potassium sulfate is soluble in water, therefore it was removed from the paint surface by simply washing with distilled water and then enhanced activity of the photocatalytic mineral paints was observed.

  20. White Light-Activated Antimicrobial Paint using Crystal Violet.

    PubMed

    Hwang, Gi Byoung; Allan, Elaine; Parkin, Ivan P

    2016-06-22

    Crystal violet (CV) was incorporated into acrylic latex to produce white-light-activated antimicrobial paint (WLAAP). Measurement of the water contact angle of the WLAAP showed that the water contact angle increased with increasing CV concentration. In a leaching test over 120 h, the amount of CV that leached from the WLAAPs was close to the detection limit (<0.03%). The WLAAPs were used to coat samples of polyurethane, and these showed bactericidal activity against Escherichia coli, which is a key causative agent of healthcare-associated infections (HAIs). A reduction in the numbers of viable bacteria was observed on the painted coated polyurethane after 6 h in the dark, and the bactericidal activity increased with increasing CV concentration (P < 0.1). After 6 h of white light exposure, all of coated polyurethanes demonstrated a potent photobactericidal activity, and it was statistically confirmed that the WLAAP showed better activity in white light than in the dark (P < 0.05). At the highest CV concentration, the numbers of viable bacteria fell below the detection limit (<10(3) CFU/mL) after 6 h of white light exposure. The difference in antimicrobial activity between the materials in the light and dark was 0.48 log at CV 250 ppm, and it increased by 0.43 log at each increment of CV 250 ppm. The difference was the highest (>1.8 log) at the highest CV concentration (1000 ppm). These WLAAPs are promising candidates for use in healthcare facilities to reduce HAIs. PMID:26479680

  1. Paint Analysis

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Lewis Research Center (LEW) has assisted The Cleveland Museum of Art (CMA) in analyzing the museum's paintings. Because of the many layers of paint that are often involved, this is a complex process. The cross-section of a paint chip must be scanned with a microscope to determine whether a paint layer is original or a restoration. The paint samples, however, are rarely flat enough for high magnification viewing and are frequently scratched. LEW devised an automated method that produces intact, flat, polished paint cross-sections. A sophisticated microprocessor-controlled grinding and polishing machine was manually employed in preparation of exotic samples for aerospace research was a readily adaptable technique. It produced perfectly flat samples with clearly defined layers. The process has been used successfully on a number of paintings, and LEW and CMA are considering additional applications.

  2. Minimal invasive control of paintings cleaning by LIBS

    NASA Astrophysics Data System (ADS)

    Staicu, A.; Apostol, I.; Pascu, A.; Urzica, I.; Pascu, M. L.; Damian, V.

    2016-03-01

    In cultural heritage restoration and conservation, it has been proved that LIBS is an appropriate technique for pigments identification, analysis of multilayered paintings, and quantitative analysis of ancient materials. Generally, experiments involving the use of laser for paint cleaning and LIBS in order to identify the composition of the removed material are made. Here, we report LIBS studies on mastic and dammar varnishes removal using visible (532 nm) and UV (266 nm) laser pulses (5 ns) with fluences in the range 0.6-4.4 J/cm2. The studied varnish layers were on-purpose painted on glass supports or were part of several mock-up samples having dammar or mastic as final layer - gold foil, yellow ochre or cobalt blue egg tempera as painting layer - chalk or acrylic ground as link to an wooden support. LIBS was used to monitor the laser induced stepwise selective removal of the layers and to analyze their composition.

  3. 76 FR 56136 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-12

    ...This notice announces that on January 21, 2010, the State of North Carolina and on March 31, 2010, the State of Mississippi were deemed authorized under section 404(a) of the Toxic Substances Control Act (TSCA), 15 U.S.C. 2684(a), to administer and enforce requirements for a renovation, repair and painting program in accordance with section 402(c)(3) of TSCA, 15 U.S.C. 2682(c)(3), and a......

  4. 24 CFR 35.935 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Rehabilitation § 35.935 Ongoing lead-based paint maintenance activities. In the case of a rental... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Ongoing lead-based...

  5. 24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Ongoing lead-based paint maintenance activities. 35.1220 Section 35.1220 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance §...

  6. 24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Ongoing lead-based...

  7. 24 CFR 35.935 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Rehabilitation § 35.935 Ongoing lead-based paint maintenance activities. In the case of a rental... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Ongoing lead-based...

  8. 24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Ongoing lead-based...

  9. 24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Ongoing lead-based...

  10. 24 CFR 35.935 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Rehabilitation § 35.935 Ongoing lead-based paint maintenance activities. In the case of a rental... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Ongoing lead-based...

  11. 24 CFR 35.935 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Rehabilitation § 35.935 Ongoing lead-based paint maintenance activities. In the case of a rental... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Ongoing lead-based...

  12. 24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Ongoing lead-based...

  13. 24 CFR 35.935 - Ongoing lead-based paint maintenance activities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Rehabilitation § 35.935 Ongoing lead-based paint maintenance activities. In the case of a rental... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Ongoing lead-based...

  14. 40 CFR 745.229 - Certification of individuals and firms engaged in lead-based paint activities: public and...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Certification of individuals and firms engaged in lead-based paint activities: public and commercial buildings, bridges and superstructures. 745.229 Section 745.229 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED...

  15. Implementation of a solvent management program to control paint shop volatile organic compounds

    SciTech Connect

    Floer, M.M.; Hicks, B.H.

    1997-12-31

    The majority of automobile assembly plant volatile organic compound (VOC) emissions are generated from painting operations. Typical paint operations generate more than 90 percent of the total plant emissions and, up to, 50 percent can be released by cleaning sources. Plant practices which contribute to the release of VOC emissions include the cleaning of paint lines and equipment, tanks, spray booths, floors and vehicles. Solvents continue to be the largest contributing source of VOC emissions in an automotive paint shop. To reduce overall VOC emissions, environmental regulations and guidelines were introduced under the Clean Air Act; Pollution Prevention and Waste Minimization programs, Control Techniques, and special air permit conditions. The introduction of these regulations and guidelines has driven industry toward continual refinement of their present cleaning methods while pursuing new techniques and technologies. Industry has also shown a proactive approach by introducing new waterborne and powder coating paint technologies to reduce overall emissions. As new paint technologies are developed and introduced, special attention must be given to the types of materials utilized for cleaning. The development and implementation of a solvent management program allows a facility to standardize a program to properly implement materials, equipment, technologies and work practices to reduce volatile organic compound emissions, meet strict cleaning requirements posed by new paint technologies and produce a vehicle which meets the high quality standards of the customer. This paper will assess the effectiveness of a solvent management program by examining pollution prevention initiatives and data from four different painting operations.

  16. Monster Paintings

    ERIC Educational Resources Information Center

    Huggler, Silvia

    2010-01-01

    In this article, the author describes a unit on monsters wherein students were charged with painting an imaginary character and, in so doing, demonstrated mastery of expression, organization of space, control of paint media, and application of the elements of art. Students discovered how color and line could be used to convey expression. The media…

  17. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Do lead-based paint poisoning... AMERICAN HOUSING ACTIVITIES General § 1000.40 Do lead-based paint poisoning prevention requirements apply..., subparts A, B, H, J, K, M and R of this title, which implement the Lead-Based Paint Poisoning...

  18. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Do lead-based paint poisoning... AMERICAN HOUSING ACTIVITIES General § 1000.40 Do lead-based paint poisoning prevention requirements apply..., subparts A, B, H, J, K, M and R of this title, which implement the Lead-Based Paint Poisoning...

  19. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Do lead-based paint poisoning... AMERICAN HOUSING ACTIVITIES General § 1000.40 Do lead-based paint poisoning prevention requirements apply..., subparts A, B, H, J, K, M and R of this title, which implement the Lead-Based Paint Poisoning...

  20. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Do lead-based paint poisoning... AMERICAN HOUSING ACTIVITIES General § 1000.40 Do lead-based paint poisoning prevention requirements apply..., subparts A, B, H, J, K, M and R of this title, which implement the Lead-Based Paint Poisoning...

  1. Examination of lead concentrations in new decorative enamel paints in four countries with different histories of activity in lead paint regulation.

    PubMed

    Clark, C Scott; Kumar, Abhay; Mohapatra, Piyush; Rajankar, Prashant; Nycz, Zuleica; Hambartsumyan, Amalia; Astanina, Lydia; Roda, Sandy; Lind, Caroline; Menrath, William; Peng, Hongying

    2014-07-01

    Paints with high lead concentrations (ppm) continue to be sold around the world in many developing countries and those with economies in transition representing a major preventable environmental health hazard that is being increased as the economies expand and paint consumption is increasing. Prior lead paint testing had been performed in Brazil and India and these countries were selected to examine the impact of a new regulatory limit in Brazil and the impact of efforts of non-governmental organizations and others to stop the use of lead compounds in manufacturing paints. Armenia and Kazakhstan, in Central Asia, were selected because no information on lead concentration in those regions was available, no regulatory activities were evident and non-governmental organizations in the IPEN network were available to participate. Another objective of this research was to evaluate the lead loading (µg/cm(2)) limit determined by X-Ray Fluorescence (XRF) for areas on toys that are too small to obtain a sample of sufficient size for laboratory analysis. The lead concentrations in more than three-fourths of the paints from Armenia and Kazakhstan exceeded 90 ppm, the limit in the United States, and 600 ppm, the limit in Brazil. The percentages were about one-half as high in Brazil and India. The average concentration in paints purchased in Armenia, 25,000 ppm, is among the highest that has been previously reported, that in Kazakhstan, 15,700 ppm, and India, 16,600, about median. The average concentration in Brazil, 5600 ppm, is among the lowest observed. Paints in Brazil that contained an average of 36,000 ppm before the regulatory limit became effective were below detection (< 9 ppm) in samples collected in the current study. The lack of any apparent public monitoring of paint lead content as part of regulatory enforcement makes it difficult to determine whether the regulation was a major factor contributing to the decline in lead use in these paints. Using data from the

  2. Thermal control paints on LDEF: Results of M0003 sub-experiment 18

    NASA Technical Reports Server (NTRS)

    Jaggers, C. H.; Meshishnek, M. J.; Coggi, J. M.

    1993-01-01

    Several thermal control paints were flown on the Long Duration Exposure Facility (LDEF), including the white paints Chemglaze A276, S13GLO, and YB-71, and the black paint D-111. The effects of low earth orbit, which includes those induced by UV radiation and atomic oxygen, varied significantly with each paint and its location on LDEF. For example, samples of Chemglaze A276 located on the trailing edge of LDEF darkened significantly due to UV-induced degradation of the paint's binder, while leading edge samples remained white but exhibited severe atomic oxygen erosion of the binder. Although the response of S13GLO to low earth orbit is much more complicated, it also exhibited greater darkening on trailing edge samples as compared to leading edge samples. In contrast, YB-71 and D-111 remained relatively stable and showed minimal degradation. The performance of these paints as determined by changes in their optical and physical properties, including solar absorptance as well as surface chemical changes and changes in surface morphology is examined. It will also provide a correlation of these optical and physical property changes to the physical phenomena that occurred in these materials during the LDEF mission.

  3. HUD`s lead-based paint activities

    SciTech Connect

    Morony, R.

    1994-12-31

    Title X of Public Law 102-550 is a major piece of legislation for the Department having to do with lead-based paint. It changes the way the Department is going to be doing all of its work with lead-based paint in all areas except public housing. It is a mandate from Congress for a great deal of change. It is going to cause revisions in the regulations. Title X authorizes a grant program to State and local governments for the abatement of lead-based paint in low income, privately owned housing. This is an area that has not gotten attention from the Federal government before. The first series of grants have been awarded, some $46 million, to six States, three cities, and one county. The grantees have been selected for $91 million that will go to 19 winners. They received 63 applications, again from State and local governments, again for privately owned housing. There is a third grant series in this fiscal year. The applications for the $142 million are due July 5, 1994. Again, HUD is looking at privately owned housing. This is not housing that is, in most cases, federally assisted in any way.

  4. Neighborhood level health risk assessment of lead paint removal activities from elevated steel bridges

    SciTech Connect

    Conway, R.F.; Cohen, J.T.; Bowers, T.

    1999-07-01

    The New York City Department of Transportation (NYCDOT) has adopted strict containment and monitoring procedures during paint removal activities on its bridges because of the increasing awareness about lead poisoning in children in urban environments and the potential risk of lead-based paint releases during those activities. NYCDOT owns nearly 800 bridges scattered throughout New York City. Before undertaking paint removal activities as part of its ongoing preventive maintenance and rehabilitation program, NYCDOT recently conducted an analysis to determine the public health risk posed to children living near them. The analysis the first of its kind to assess the actual public health risk potential during both routine operations and upset conditions, or accidental releases evaluated the total and incremental blood lead levels from paint removal activities on more than 5,000 children from 6 months to 6 years old. Increases in baseline blood lead levels were estimated using several models, including EPA's Integrated Exposure Uptake Biokinetic (IEUBK) Model. This model estimates steady-state blood lead levels in children, reflecting exposure to lead in multiple media over an extended period of time. Increases in lead exposure from paint removal activities in the area surrounding the bridges was estimated using EPA's Industrial Source Complex (ISC3) model to calculate ambient air and deposition levels. Potential releases from the containment and ancillary equipment used in the paint removal process were modeled based on different release scenarios ranging from routine operations to complete failure of containment. To estimate the paint removal activities' contribution to long-term exterior dust lead levels (and its related interior component), a stochastic simulation model was developed for each block in the study area.

  5. Emittance characterization of thermal control paints, coatings and surfaces using a calorimetric technique

    NASA Technical Reports Server (NTRS)

    Jaworske, Donald A.

    1994-01-01

    Thermal control surfaces are used in every spacecraft thermal management system to dissipate heat through radiant heat transfer. This paper describes the thermal performance of several thermal control paints, coatings, and surfaces, as characterized by a calorimetric vacuum emissometer. The emissometer is designed to measure the functional emittance of a surface based on heat transfer from an underlying substrate to the surface and from the surface or near surface to a surrounding cold wall. Emittance measurements were made between 200 and 350 K. Polished aluminum, used here as a standard, was found to have a total hemispherical emittance of 0.06, as expected. A velvet black paint, also used here as a standard, was found to have an emittance of 0.94 at room temperature. Other surfaces of interest included a polyurethane-based black paint designated Z-306, a highly polished 316L stainless steel, and an atomic oxygen beam-textured carbon-carbon composite.

  6. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED... for the Evaluation and Control of Lead-Based Paint Hazards in Housing; the EPA Guidance on Residential... control procedures; and/or (ii) All collected paint chip samples shall be analyzed according to...

  7. USERS GUIDE FOR THE CONVERSION OF NAVY PAINT SPRAY BOOTH PARTICULATE EMISSION CONTROL SYSTEMS FROM WET TO DRY OPERATION

    EPA Science Inventory

    The report is a guide or convrting U.S. Navy paint spray booth particulate emission control systems from wet to dry operation. The use of water curtains for air pollution control of paint spray booths is considered a major source of water and solid waste pol-lution from industria...

  8. 78 FR 38730 - Announcement of Funding Awards for Lead-Based Paint Hazard Control, and Lead Hazard Reduction...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-27

    ... Lead Based Paint Hazard Control and the Lead Hazard Reduction Demonstration Programs (FR-5700-N-04... URBAN DEVELOPMENT Announcement of Funding Awards for Lead-Based Paint Hazard Control, and Lead Hazard Reduction Demonstration Grant Programs for Fiscal Year (FY) 2013 AGENCY: Office of Healthy Homes and...

  9. Niacin metabolism and indoleamine 2,3-dioxygenase activation in malnourished patients with flaky paint dermatosis.

    PubMed

    Maltos, André Luiz; Portari, Guilherme Vannucchi; Moraes, Giselle Vanessa; Monteiro, Marina Casteli Rodrigues; Vannucchi, Helio; da Cunha, Daniel Ferreira

    2015-06-01

    Flaky paint dermatosis, characterized by extensive, often bilateral areas of flaking and pigmentation, mostly in sun unexposed areas is considered a feature of kwashiorkor in both children and adults, and must be differentiated from other dermatosis, including chapped and xerotica skin, and pellagra. In this case series we provide evidence that malnourished patients with flaky paint dermatosis and infection/inflammation shown laboratory data suggestive of indoleamine 2,3-dioxygenase (IDO) activation, besides decreased urinary excretion of N1-methylnicotinamide (N1 MN), a marker of pellagra. We study nine adult patients showing flaky paint dermatosis and clinical features of infection or inflammation, and increased serum C-reactive protein, characteristic of the presence of acute phase response syndrome. As a group, they had low or deficient urinary N1 MN excretion (0.52 ± 0.39 mg/g creatinine) compatible with pellagra. They also showed low serum tryptophan levels (<29 μmol/L) and a serum kynurenine/tryptophan ratio higher than 0.04, suggesting increased IDO expression and increase in the tryptophan oxidation. Findings suggest that some patients with flaky paint dermatosis showed laboratory data suggestive of IDO activation, besides decreased N1 MN urinary excretion. Taken together, the data support the idea that flaky paint dermatosis could be a skin manifestation of niacin deficiency. PMID:25933499

  10. Thermal Cycling of Thermal Control Paints on Carbon-Carbon and Carbon-Polyimide Composites

    NASA Technical Reports Server (NTRS)

    Jaworske, Donald A.

    2006-01-01

    Carbon-carbon composites and carbon-polyimide composites are being considered for space radiator applications owing to their light weight and high thermal conductivity. For those radiator applications where sunlight will impinge on the surface, it will be necessary to apply a white thermal control paint to minimize solar absorptance and enhance infrared emittance. Several currently available white thermal control paints were applied to candidate carbon-carbon and carbon-polyimide composites and were subjected to vacuum thermal cycling in the range of -100 C to +277 C. The optical properties of solar absorptance and infrared emittance were evaluated before and after thermal cycling. In addition, adhesion of the paints was evaluated utilizing a tape test. The test matrix included three composites: resin-derived carbon-carbon and vapor infiltrated carbon-carbon, both reinforced with pitch-based P-120 graphite fibers, and a polyimide composite reinforced with T-650 carbon fibers, and three commercially available white thermal control paints: AZ-93, Z-93-C55, and YB-71P.

  11. Examination of lead concentrations in new decorative enamel paints in four countries with different histories of activity in lead paint regulation

    SciTech Connect

    Clark, C. Scott; Kumar, Abhay; Mohapatra, Piyush; Rajankar, Prashant; Nycz, Zuleica; Hambartsumyan, Amalia; Astanina, Lydia; Roda, Sandy; Lind, Caroline; Menrath, William; Peng, Hongying

    2014-07-15

    Paints with high lead concentrations (ppm) continue to be sold around the world in many developing countries and those with economies in transition representing a major preventable environmental health hazard that is being increased as the economies expand and paint consumption is increasing. Prior lead paint testing had been performed in Brazil and India and these countries were selected to examine the impact of a new regulatory limit in Brazil and the impact of efforts of non-governmental organizations and others to stop the use of lead compounds in manufacturing paints. Armenia and Kazakhstan, in Central Asia, were selected because no information on lead concentration in those regions was available, no regulatory activities were evident and non-governmental organizations in the IPEN network were available to participate. Another objective of this research was to evaluate the lead loading (µg/cm{sup 2}) limit determined by X-Ray Fluorescence (XRF) for areas on toys that are too small to obtain a sample of sufficient size for laboratory analysis. The lead concentrations in more than three-fourths of the paints from Armenia and Kazakhstan exceeded 90 ppm, the limit in the United States, and 600 ppm, the limit in Brazil. The percentages were about one-half as high in Brazil and India. The average concentration in paints purchased in Armenia, 25,000 ppm, is among the highest that has been previously reported, that in Kazakhstan, 15,700 ppm, and India, 16,600, about median. The average concentration in Brazil, 5600 ppm, is among the lowest observed. Paints in Brazil that contained an average of 36,000 ppm before the regulatory limit became effective were below detection (<9 ppm) in samples collected in the current study. The lack of any apparent public monitoring of paint lead content as part of regulatory enforcement makes it difficult to determine whether the regulation was a major factor contributing to the decline in lead use in these paints. Using data from the

  12. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... lead-based paint activities: target housing and child-occupied facilities. 745.227 Section 745.227... practice standards for conducting lead-based paint activities: target housing and child-occupied facilities... section are found in the following: The U.S. Department of Housing and Urban Development (HUD)...

  13. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... lead-based paint activities: target housing and child-occupied facilities. 745.227 Section 745.227... practice standards for conducting lead-based paint activities: target housing and child-occupied facilities... section are found in the following: The U.S. Department of Housing and Urban Development (HUD)...

  14. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... lead-based paint activities: target housing and child-occupied facilities. 745.227 Section 745.227... practice standards for conducting lead-based paint activities: target housing and child-occupied facilities... section are found in the following: The U.S. Department of Housing and Urban Development (HUD)...

  15. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... lead-based paint activities: target housing and child-occupied facilities. 745.227 Section 745.227... practice standards for conducting lead-based paint activities: target housing and child-occupied facilities... section are found in the following: The U.S. Department of Housing and Urban Development (HUD)...

  16. 40 CFR 745.238 - Fees for accreditation and certification of lead-based paint activities.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-certification (every 3 years, see 40 CFR 745.226(f)(7) for details) Firm $550 $550 Combined Renovation and Lead... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN..., see 40 CFR 745.225(f)(1) for details) Initial CourseInspector Risk assessor Supervisor Worker...

  17. 40 CFR 745.238 - Fees for accreditation and certification of lead-based paint activities.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-certification (every 3 years, see 40 CFR 745.226(f)(7) for details) Firm $550 $550 Combined Renovation and Lead... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN..., see 40 CFR 745.225(f)(1) for details) Initial CourseInspector Risk assessor Supervisor Worker...

  18. 40 CFR 745.238 - Fees for accreditation and certification of lead-based paint activities.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-certification (every 3 years, see 40 CFR 745.226(f)(7) for details) Firm $550 $550 Combined Renovation and Lead... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN..., see 40 CFR 745.225(f)(1) for details) Initial CourseInspector Risk assessor Supervisor Worker...

  19. 40 CFR 745.238 - Fees for accreditation and certification of lead-based paint activities.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-certification (every 3 years, see 40 CFR 745.226(f)(7) for details) Firm $550 $550 Combined Renovation and Lead... PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN..., see 40 CFR 745.225(f)(1) for details) Initial CourseInspector Risk assessor Supervisor Worker...

  20. T & I--Painting and Decorating. Kit No. 5. Instructor's Manual [and] Student Learning Activity Guide.

    ERIC Educational Resources Information Center

    Lanford, Frank

    An instructor's manual and student activity guide on painting and decorating are provided in this set of prevocational education materials which focuses on the vocational area of trade and industry. (This set of materials is one of ninety-two prevocational education sets arranged around a cluster of seven vocational offerings: agriculture, home…

  1. Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action.

    PubMed

    Hoque, Jiaul; Akkapeddi, Padma; Yadav, Vikas; Manjunath, Goutham B; Uppu, Divakara S S M; Konai, Mohini M; Yarlagadda, Venkateswarlu; Sanyal, Kaustuv; Haldar, Jayanta

    2015-01-28

    Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint. PMID:25541751

  2. Electron Beam Exposure of Thermal Control Paints on Carbon-Carbon and Carbon-Polyimide Composites

    NASA Technical Reports Server (NTRS)

    Jaworske, Donald A.

    2006-01-01

    Carbon-carbon and carbon-polyimide composites are being considered for use as radiator face sheets or fins for space radiator applications. Several traditional white thermal control paints are being considered for the surface of the composite face sheets or fins. One threat to radiator performance is high energy electrons. The durability of the thermal control paints applied to the carbon-carbon and carbon-polyimide composites was evaluated after extended exposure to 4.5 MeV electrons. Electron exposure was conducted under argon utilizing a Mylar(TradeMark) bag enclosure. Solar absorptance and infrared emittance was evaluated before and after exposure to identify optical properties degradation. Adhesion of the paints to the carbon-carbon and carbon-polyimide composite substrates was also of interest. Adhesion was evaluated on pristine and electron beam exposed coupons using a variation of the ASTM D-3359 tape test. Results of the optical properties evaluation and the adhesion tape tests are summarized.

  3. 40 CFR 745.230 - Work practice standards for conducting lead-based paint activities: public and commercial...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Work practice standards for conducting lead-based paint activities: public and commercial buildings, bridges and superstructures. 745.230... commercial buildings, bridges and superstructures....

  4. 40 CFR 745.230 - Work practice standards for conducting lead-based paint activities: public and commercial...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Work practice standards for conducting lead-based paint activities: public and commercial buildings, bridges and superstructures. 745.230... commercial buildings, bridges and superstructures....

  5. COST EFFECTIVE VOC EMISSION CONTROL STARTEGIES FOR MILITARY, AEROSPACE,AND INDUSTRIAL PAINT SPRAY BOOTH OPERATIONS: COMBINING IMPROVED VENTILATION SYSTEMS WITH INNOVATIVE, LOW COST EMISSION CONTROL TECHNOLOGIES

    EPA Science Inventory

    The paper describes a full-scale demonstration program in which several paint booths were modified for recirculation ventilation; the booth exhaust streams are vented to an innovative volatile organic compound (VOC) emission control system having extremely low operating costs. ...

  6. 75 FR 58423 - Notice of Funding Availability for HUD's Fiscal Year (FY) 2010 Lead-Based Paint Hazard Control...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-24

    ... URBAN DEVELOPMENT Notice of Funding Availability for HUD's Fiscal Year (FY) 2010 Lead-Based Paint Hazard Control Grant Program and Lead Hazard Reduction Demonstration Grant Program; Technical Correction AGENCY: Office of Healthy Homes and Lead Hazard Control, HUD. ACTION: Notice of technical correction. SUMMARY:...

  7. Spot Paint Sprayer

    NASA Technical Reports Server (NTRS)

    Leifsen, J. Arthur

    1987-01-01

    Proposed atomizing system applies paint to small areas or objects - typically nuts, bolts, or other fasteners on flat surfaces. System used in electronic and mechanical assemblies, where small parts coated but not reached by normal spraying techniques. Coverage expected more complete than that obtained by hand brushing. Paint applicator contains two chambers in which flow of air and atomized paint controlled to ensure complete coating of fastener. In electrostatic version, inner tube serves as one electrode, while object coated serves as other electrode.

  8. An investigation of the neural substrates of mind wandering induced by viewing traditional Chinese landscape paintings

    PubMed Central

    Wang, Tingting; Mo, Lei; Vartanian, Oshin; Cant, Jonathan S.; Cupchik, Gerald

    2015-01-01

    The present study was conducted to investigate whether the calming effect induced by viewing traditional Chinese landscape paintings would make disengagement from that mental state more difficult, as measured by performance on a cognitive control task. In Experiment 1 we examined the subjective experience of viewing traditional Chinese landscape paintings vs. realistic oil landscape paintings in a behavioral study. Our results confirmed that, as predicted, traditional Chinese landscape paintings induce greater levels of relaxation and mind wandering and lower levels of object-oriented absorption and recognition, compared to realistic oil landscape paintings. In Experiment 2 we used functional Magnetic Resonance Imaging to explore the behavioral and neural effects of viewing traditional Chinese landscape paintings on a task requiring cognitive control (i.e., the flanker task)—administered immediately following exposure to paintings. Contrary to our prediction, the behavioral data demonstrated that compared to realistic oil landscape paintings, exposure to traditional Chinese landscape paintings had no effect on performance on the flanker task. However, the neural data demonstrated an interaction effect such that there was greater activation in the inferior parietal cortex and the superior frontal gyrus on incongruent compared with congruent flanker trials when participants switched from viewing traditional Chinese landscape paintings to the flanker task than when they switched from realistic oil landscape paintings. These results suggest that switching from traditional Chinese landscape paintings placed greater demands on the brain’s attention and working memory networks during the flanker task than did switching from realistic oil landscape paintings. PMID:25610386

  9. An investigation of the neural substrates of mind wandering induced by viewing traditional Chinese landscape paintings.

    PubMed

    Wang, Tingting; Mo, Lei; Vartanian, Oshin; Cant, Jonathan S; Cupchik, Gerald

    2014-01-01

    The present study was conducted to investigate whether the calming effect induced by viewing traditional Chinese landscape paintings would make disengagement from that mental state more difficult, as measured by performance on a cognitive control task. In Experiment 1 we examined the subjective experience of viewing traditional Chinese landscape paintings vs. realistic oil landscape paintings in a behavioral study. Our results confirmed that, as predicted, traditional Chinese landscape paintings induce greater levels of relaxation and mind wandering and lower levels of object-oriented absorption and recognition, compared to realistic oil landscape paintings. In Experiment 2 we used functional Magnetic Resonance Imaging to explore the behavioral and neural effects of viewing traditional Chinese landscape paintings on a task requiring cognitive control (i.e., the flanker task)-administered immediately following exposure to paintings. Contrary to our prediction, the behavioral data demonstrated that compared to realistic oil landscape paintings, exposure to traditional Chinese landscape paintings had no effect on performance on the flanker task. However, the neural data demonstrated an interaction effect such that there was greater activation in the inferior parietal cortex and the superior frontal gyrus on incongruent compared with congruent flanker trials when participants switched from viewing traditional Chinese landscape paintings to the flanker task than when they switched from realistic oil landscape paintings. These results suggest that switching from traditional Chinese landscape paintings placed greater demands on the brain's attention and working memory networks during the flanker task than did switching from realistic oil landscape paintings. PMID:25610386

  10. Experimental measurement of the plasma conductivity of Z93 and Z93P thermal control paint

    NASA Technical Reports Server (NTRS)

    Hillard, G. Barry

    1993-01-01

    Two samples each of Z93 and Z93P thermal control paint were exposed to a simulated space environment in a plasma chamber. The samples were biased through a series of voltages ranging from -200 volts to +300 volts and electron and ion currents measured. By comparing the currents to those of pure metal samples of the same size and shape, the conductivity of the samples was calculated. Measured conductivity was dependent on the bias potential in all cases. For Z93P, conductivity was approximately constant over much of the bias range and we find a value of 0.5 micro-mhos per square meter for both electron and ion current. For Z93, the dependence on bias was much more pronounced but conductivity can be said to be approximately one order of magnitude larger. In addition to presenting these results, this report documents all of the experimental data as well as the statistical analyses performed.

  11. A girl with increased writing and painting activities associated with Turner's syndrome and autistic spectrum disorder.

    PubMed

    Ahouee, Shohreh Mohseni; Shooshtari, Mitra Hakim; Bidaki, Reza

    2015-01-01

    This report describes the findings on the evaluation of a 9-year-old girl with disabling and pronounced increased writing and painting activities associated with Turner's syndrome and autistic spectrum disorder. She spent most of the time doing these activities which affected not only her academic performance, but also social relationships. A comprehensive treatment plan consists of both biological and psychological aspects, is the main point of this case. Low dose of risperidone (0.5 mg/day) was started to decrease the patient's stereotypic behaviors. Sertraline (12.5 mg/day) was prescribed for her phobia. She was also referred to an occupational therapist in order to improve her social skills. PMID:26015917

  12. Window replacement and residential lead paint hazard control 12 years later.

    PubMed

    Dixon, Sherry L; Jacobs, David E; Wilson, Jonathan W; Akoto, Judith Y; Nevin, Rick; Scott Clark, C

    2012-02-01

    Window replacement is a key method of reducing childhood lead exposure, but the long-term effectiveness has not been previously evaluated. Windows have the highest levels of interior lead paint and dust compared to other building components. Our objective was to conduct a follow-up study of residential window replacement and lead hazard control 12 years after homes were enrolled in an evaluation of the HUD Lead Hazard Control Grant Program, sampling settled lead dust in housing in four cities (n=189 homes). Previous work evaluated lead hazard controls up to 6 years after intervention using dust lead measurements and two years after intervention using both dust and blood lead data. But the earlier work could not examine the effect of window replacement over the longer time period examined here: 12 years. The individual homes were assigned to one of three categories, based on how many windows had been replaced: all replacement, some replacement, or non-replacement. Windows that were not replaced were repaired. We controlled for covariates such as site, housing condition, presence of lead paint, and season using longitudinal regression modeling. Adjusted floor and sill dust lead geometric mean dust lead loadings declined at least 85% from pre-intervention to 12 years after the intervention for homes with all replacement windows, some windows replaced and no windows replaced. Twelve years after intervention, homes with all replacement windows had 41% lower interior floor dust lead, compared to non-replacement homes (1.4 versus 2.4 μg/ft2, p<0.001), and window sill dust lead was 51% lower (25 versus 52 μg/ft2, p=0.006) while controlling for covariates. Homes with some windows replaced had interior floor and window sill dust lead loadings that were 28% (1.7 versus 2.4 μg/ft2, p=0.19) and 37% (33 versus 52 μg/ft2, p=0.07) lower, respectively, compared to non-replacement homes. The net economic benefit of window replacement compared to window repair (non

  13. Human, Nature, Dynamism: The Effects of Content and Movement Perception on Brain Activations during the Aesthetic Judgment of Representational Paintings

    PubMed Central

    Di Dio, Cinzia; Ardizzi, Martina; Massaro, Davide; Di Cesare, Giuseppe; Gilli, Gabriella; Marchetti, Antonella; Gallese, Vittorio

    2016-01-01

    Movement perception and its role in aesthetic experience have been often studied, within empirical aesthetics, in relation to the human body. No such specificity has been defined in neuroimaging studies with respect to contents lacking a human form. The aim of this work was to explore, through functional magnetic imaging (f MRI), how perceived movement is processed during the aesthetic judgment of paintings using two types of content: human subjects and scenes of nature. Participants, untutored in the arts, were shown the stimuli and asked to make aesthetic judgments. Additionally, they were instructed to observe the paintings and to rate their perceived movement in separate blocks. Observation highlighted spontaneous processes associated with aesthetic experience, whereas movement judgment outlined activations specifically related to movement processing. The ratings recorded during aesthetic judgment revealed that nature scenes received higher scored than human content paintings. The imaging data showed similar activation, relative to baseline, for all stimuli in the three tasks, including activation of occipito-temporal areas, posterior parietal, and premotor cortices. Contrast analyses within aesthetic judgment task showed that human content activated, relative to nature, precuneus, fusiform gyrus, and posterior temporal areas, whose activation was prominent for dynamic human paintings. In contrast, nature scenes activated, relative to human stimuli, occipital and posterior parietal cortex/precuneus, involved in visuospatial exploration and pragmatic coding of movement, as well as central insula. Static nature paintings further activated, relative to dynamic nature stimuli, central and posterior insula. Besides insular activation, which was specific for aesthetic judgment, we found a large overlap in the activation pattern characterizing each stimulus dimension (content and dynamism) across observation, aesthetic judgment, and movement judgment tasks. These

  14. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Do lead-based paint poisoning prevention requirements apply to affordable housing activities under NAHASDA? 1000.40 Section 1000.40 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND...

  15. 40 CFR 745.229 - Certification of individuals and firms engaged in lead-based paint activities: public and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Certification of individuals and firms engaged in lead-based paint activities: public and commercial buildings, bridges and superstructures. 745...: public and commercial buildings, bridges and superstructures....

  16. 40 CFR 745.229 - Certification of individuals and firms engaged in lead-based paint activities: public and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Certification of individuals and firms engaged in lead-based paint activities: public and commercial buildings, bridges and superstructures. 745...: public and commercial buildings, bridges and superstructures....

  17. 40 CFR 745.229 - Certification of individuals and firms engaged in lead-based paint activities: public and...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Certification of individuals and firms engaged in lead-based paint activities: public and commercial buildings, bridges and superstructures. 745...: public and commercial buildings, bridges and superstructures....

  18. Controlling the Color of Lead-Free Red Overglaze Enamels and a Process for Preparing High-Quality Red Paints.

    PubMed

    Hashimoto, Hideki; Inada, Hirofumi; Okazaki, Yuki; Takaishi, Taigo; Fujii, Tatsuo; Takada, Jun

    2016-05-01

    Akae porcelain, an artistic Japanese traditional overglaze ceramic typically known for Kakiemon-style ware, has fascinated porcelain lovers around the world for over 400 years because of the graceful red color displayed by akae that matches so well with white porcelain bodies. In this work, we clarified the factors that control the color of akae and those that are conventionally controlled by artisans based on empirical experience. Inspired by a recent particle-design method, we also developed a practical facile process to prepare red paints that yields high-quality akae. Various akae samples were prepared from a combination of lead-free alkali borosilicate glass frits with different particle sizes and hematite powders with differing dispersibilities. Polarized light microscopy, scanning electron microscopy, and transmission electron microscopy analyses indicate that considering only the dispersibility of hematite powders is not sufficient, but the frit-particle size must be controlled to obtain high-quality akae with a high reflectance value for ≥580 nm visible light. In addition, we developed a process for preparing high-quality red paints that uses a large-particle frit powder and a strongly aggregated-hematite powder, both of which are easily obtainable. The red paint composed of frit, hematite, and the solvent is mixed until the paint is drying. By adding more solvent and repeating this process three times, we obtained high-quality akae with a higher reflectance value than for the akae prepared from a frit with submicron-sized particles and weakly aggregated-hematite powder. On the basis of transmission electron microscopic observations, we consider the red paint to consist of a core/shell-like composite structure of frit and hematite, forming a three-dimensional network in the akae glass layer. The good dispersibility of these particles leads to high-quality akae. PMID:27093650

  19. Painting "mania".

    PubMed

    Rybakowski, Janusz K

    2011-02-01

    Bipolar mood disorder (manic-depressive illness) has many artistic references, especially in the painting domain, depicting moods and associated features. The title of some paintings directly refers to the psychopathological state of the disorder. There are a great number of painting masterpieces showing the depressive pole of manic-depressive illness. In some paintings bearing the title Melancholia, some admixture of the opposite manic pole can be traced, the phenomenon named today as "mixed depressive state". On the other hand, a painting depicting a pure manic pole, as an element of bipolar mood disorder is very difficult to find. However, it seems that such criteria could be met by the painting presented on the next page entitled "Mania" whose author is Florencio Yllana, a contemporary artist of Philippine origin (born 1977), studying in USA and presently living in Brazil. The painting was done in 2001 following the acute manic episode in the course of bipolar mood disorder in the artist. PMID:20692707

  20. Achievement of a low-outgassing white paint system for spacecraft thermal control

    NASA Technical Reports Server (NTRS)

    Seidenberg, B.; Park, J. J.; Clatterbuck, C.

    1972-01-01

    Test results and data for achieving a low-outgassing polymer resin suitable for potting or a paint pigment are presented. The resin, prepared in 0.5-kg (1-lb) batches, is acceptable for spacecraft use; its weight loss is less than 0.5 percent, and the volatile condensable materials are less than 0.05 percent. The paint adheres to a primed fiber glass or aluminum substrate. Results of UV irradiation, electron and proton radiation, and thermal cycling are presented.

  1. 76 FR 27044 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-10

    ... Reduction. In the Federal Register dated April 22, 2008, (73 FR 21692), EPA promulgated final TSCA section... dust sampling technicians. In the Federal Register of June 1, 1998, (63 FR 29908), EPA promulgated... authorized under section 404(a) of the Toxic Substances Control Act (TSCA), 15 U.S.C. 2684(a), to...

  2. Measuring Global Surface Pressures on a Circulation Control Concept Using Pressure Sensitive Paint

    NASA Technical Reports Server (NTRS)

    Watkins, Anthony N.; Lipford, William E.; Leighty, Bradley D.; Goodman, Kyle Z.; Goad, William K.

    2012-01-01

    This report will present the results obtained from the Pressure Sensitive Paint (PSP) technique on a circulation control concept model. This test was conducted at the National Transonic Facility (NTF) at the NASA Langley Research Center. PSP was collected on the upper wing surface while the facility was operating in cryogenic mode at 227 K (-50 oF). The test envelope for the PSP portion included Mach numbers from 0.7 to 0.8 with angle of attack varying between 0 and 8 degrees and a total pressure of approximately 168 kPa (24.4 psi), resulting in a chord Reynolds number of approximately 15 million. While the PSP results did exhibit high levels of noise in certain conditions (where the oxygen content of the flow was very small), some conditions provided good correlation between the PSP and pressure taps, showing the ability of the PSP technique. This work also served as a risk reduction opportunity for future testing in cryogenic conditions at the NTF.

  3. Life cycle contributions of copper from vessel painting and maintenance activities

    PubMed Central

    Earley, Patrick J.; Swope, Brandon L.; Barbeau, Katherine; Bundy, Randelle; McDonald, Janessa A.; Rivera-Duarte, Ignacio

    2013-01-01

    Copper-based epoxy and ablative antifouling painted panels were exposed in natural seawater to evaluate environmental loading parameters. In situ loading factors including initial exposure, passive leaching, and surface refreshment were measured utilizing two protocols developed by the US Navy: the dome method and the in-water hull cleaning sampling method. Cleaning techniques investigated included a soft-pile carpet and a medium duty 3M™ pad for fouling removal. Results show that the passive leach rates of copper peaked three days after both initial deployment and cleaning events (CEs), followed by a rapid decrease over about 15 days and a slow approach to asymptotic levels on approximately day 30. Additionally, copper was more bioavailable during a CE in comparison to the passive leaching that immediately followed. A paint life cycle model quantifying annual copper loading estimates for each paint and cleaning method based on a three-year cycle of painting, episodic cleaning, and passive leaching is presented. PMID:24199998

  4. Impact of Paint Color on Rest Period Climate Control Loads in Long-Haul Trucks: Preprint

    SciTech Connect

    Lustbader, J.; Kreutzer, C.; Jeffers, M.; Adelman, S.; Yeakel, S.; Brontz, P.; Olson, K.; Ohlinger, J.

    2014-02-01

    Cab climate conditioning is one of the primary reasons for operating the main engine in a long-haul truck during driver rest periods. In the United States, sleeper cab trucks use approximately 667 million gallons of fuel annually for rest period idling. The U.S. Department of Energy's National Renewable Energy Laboratory's (NREL) CoolCab Project works closely with industry to design efficient thermal management systems for long-haul trucks that minimize engine idling and fuel use while maintaining occupant comfort. Heat transfer to the vehicle interior from opaque exterior surfaces is one of the major heat pathways that contribute to air conditioning loads during long-haul truck daytime rest period idling. To quantify the impact of paint color and the opportunity for advanced paints, NREL collaborated with Volvo Group North America, PPG Industries, and Dometic Environmental Corporation. Initial screening simulations using CoolCalc, NREL's rapid HVAC load estimation tool, showed promising air-conditioning load reductions due to paint color selection. Tests conducted at NREL's Vehicle Testing and Integration Facility using long-haul truck cab sections, 'test bucks,' showed a 31.1% of maximum possible reduction in rise over ambient temperature and a 20.8% reduction in daily electric air conditioning energy use by switching from black to white paint. Additionally, changing from blue to an advanced color-matched solar reflective blue paint resulted in a 7.3% reduction in daily electric air conditioning energy use for weather conditions tested in Colorado. National-level modeling results using weather data from major U.S. cities indicated that the increase in heating loads due to lighter paint colors is much smaller than the reduction in cooling loads.

  5. Painted Pickup.

    ERIC Educational Resources Information Center

    Wheeler, Kimberly

    2001-01-01

    Discusses a six week art class project for elementary school children that lasted for six weeks. Explains that the students painted sunflowers in the style of Vincent van Gogh over the rust spots of a pickup truck. Reports that the painting served as great publicity for the art classes. (CMK)

  6. Face Painting.

    ERIC Educational Resources Information Center

    Brooks, Diana

    1995-01-01

    Discusses the use of face painting as a technique for making the endangered species issue tangible for children while addressing the complexity of the issue. Children are "given" an animal of their own and are educated about the animal while having their faces painted to resemble the animal. (LZ)

  7. DEMONSTRATION OF A PAINT SPRAY BOOTH EMISSION CONTROL STRATEGY USING RECIRCULATION/PARTITIONING & UV/OZONE POLLUTION EMISSION CONTROL - VOLUME 1. TECHNICAL REPORT

    EPA Science Inventory

    The report describes in detail the source testing, construction, and data reduction/analysis activities that comprise the three phases of a technology demonstration program. Phase I consisted of a detailed baseline evaluation of several paint spray booths operated at the Barstow,...

  8. Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings

    EPA Science Inventory

    Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings” (Technical Approach Document). Also available for public review and comment are two supplementary documents: the detai...

  9. Optical painting and fluorescence activated sorting of single adherent cells labelled with photoswitchable Pdots.

    PubMed

    Kuo, Chun-Ting; Thompson, Alison M; Gallina, Maria Elena; Ye, Fangmao; Johnson, Eleanor S; Sun, Wei; Zhao, Mengxia; Yu, Jiangbo; Wu, I-Che; Fujimoto, Bryant; DuFort, Christopher C; Carlson, Markus A; Hingorani, Sunil R; Paguirigan, Amy L; Radich, Jerald P; Chiu, Daniel T

    2016-01-01

    The efficient selection and isolation of individual cells of interest from a mixed population is desired in many biomedical and clinical applications. Here we show the concept of using photoswitchable semiconducting polymer dots (Pdots) as an optical 'painting' tool, which enables the selection of certain adherent cells based on their fluorescence, and their spatial and morphological features, under a microscope. We first develop a Pdot that can switch between the bright (ON) and dark (OFF) states reversibly with a 150-fold contrast ratio on irradiation with ultraviolet or red light. With a focused 633-nm laser beam that acts as a 'paintbrush' and the photoswitchable Pdots as the 'paint', we select and 'paint' individual Pdot-labelled adherent cells by turning on their fluorescence, then proceed to sort and recover the optically marked cells (with 90% recovery and near 100% purity), followed by genetic analysis. PMID:27118210

  10. Optical painting and fluorescence activated sorting of single adherent cells labelled with photoswitchable Pdots

    PubMed Central

    Kuo, Chun-Ting; Thompson, Alison M.; Gallina, Maria Elena; Ye, Fangmao; Johnson, Eleanor S.; Sun, Wei; Zhao, Mengxia; Yu, Jiangbo; Wu, I-Che; Fujimoto, Bryant; DuFort, Christopher C.; Carlson, Markus A.; Hingorani, Sunil R.; Paguirigan, Amy L.; Radich, Jerald P.; Chiu, Daniel T.

    2016-01-01

    The efficient selection and isolation of individual cells of interest from a mixed population is desired in many biomedical and clinical applications. Here we show the concept of using photoswitchable semiconducting polymer dots (Pdots) as an optical ‘painting' tool, which enables the selection of certain adherent cells based on their fluorescence, and their spatial and morphological features, under a microscope. We first develop a Pdot that can switch between the bright (ON) and dark (OFF) states reversibly with a 150-fold contrast ratio on irradiation with ultraviolet or red light. With a focused 633-nm laser beam that acts as a ‘paintbrush' and the photoswitchable Pdots as the ‘paint', we select and ‘paint' individual Pdot-labelled adherent cells by turning on their fluorescence, then proceed to sort and recover the optically marked cells (with 90% recovery and near 100% purity), followed by genetic analysis. PMID:27118210

  11. Tempera Painting

    ERIC Educational Resources Information Center

    Albenda, Pauline

    1973-01-01

    Through his experiences with tempera painting, the youthful person will become aware that art expression involves a combining of factors of the original ingredients into new modes of expression. (Author)

  12. 24 CFR 35.1355 - Ongoing lead-based paint maintenance and reevaluation activities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... CFR 745.227(d)(8)-(11), but only if the soil lead levels have not been previously measured. (C) The... Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... assessment and have the samples analyzed, in accordance with 40 CFR 745.227(b)(3)(4), but only if...

  13. 24 CFR 35.1355 - Ongoing lead-based paint maintenance and reevaluation activities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... CFR 745.227(d)(8)-(11), but only if the soil lead levels have not been previously measured. (C) The... Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... assessment and have the samples analyzed, in accordance with 40 CFR 745.227(b)(3)(4), but only if...

  14. 24 CFR 35.1355 - Ongoing lead-based paint maintenance and reevaluation activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... CFR 745.227(d)(8)-(11), but only if the soil lead levels have not been previously measured. (C) The... Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... assessment and have the samples analyzed, in accordance with 40 CFR 745.227(b)(3)(4), but only if...

  15. 24 CFR 35.1355 - Ongoing lead-based paint maintenance and reevaluation activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CFR 745.227(d)(8)-(11), but only if the soil lead levels have not been previously measured. (C) The... Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... assessment and have the samples analyzed, in accordance with 40 CFR 745.227(b)(3)(4), but only if...

  16. 24 CFR 35.1355 - Ongoing lead-based paint maintenance and reevaluation activities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... CFR 745.227(d)(8)-(11), but only if the soil lead levels have not been previously measured. (C) The... Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN... assessment and have the samples analyzed, in accordance with 40 CFR 745.227(b)(3)(4), but only if...

  17. Rapid new methods for paint collection and lead extraction.

    PubMed

    Gutknecht, William F; Harper, Sharon L; Winstead, Wayne; Sorrell, Kristen; Binstock, David A; Salmons, Cynthia A; Haas, Curtis; McCombs, Michelle; Studabaker, William; Wall, Constance V; Moore, Curtis

    2009-01-01

    Chronic exposure of children to lead can result in permanent physiological impairment. In adults, it can cause irritability, poor muscle coordination, and nerve damage to the sense organs and nerves controlling the body. Surfaces coated with lead-containing paints are potential sources of exposure to lead. In April 2008, the U.S. Environmental Protection Agency (EPA) finalized new requirements that would reduce exposure to lead hazards created by renovation, repair, and painting activities, which disturb lead-based paint. On-site, inexpensive identification of lead-based paint is required. Two steps have been taken to meet this challenge. First, this paper presents a new, highly efficient method for paint collection that is based on the use of a modified wood drill bit. Second, this paper presents a novel, one-step approach for quantitatively grinding and extracting lead from paint samples for subsequent lead determination. This latter method is based on the use of a high-revolutions per minute rotor with stator to break up the paint into approximately 50 micron-size particles. Nitric acid (25%, v/v) is used to extract the lead in <3 minutes. Recoveries are consistently >95% for real-world paints, National Institute of Standards and Technology's standard reference materials, and audit samples from the American Industrial Hygiene Association's Environmental Lead Proficiency Analytical Testing Program. This quantitative extraction procedure, when paired with quantitative paint sample collection and lead determination, may enable the development of a lead paint test kit that will meet the specifications of the final EPA rule. PMID:19137153

  18. Paint and Pregnancy

    MedlinePlus

    ... are many other mixtures of paints used for industry, the arts, and hobbies. Years ago, lead and mercury were used in paint. How would I be exposed to the chemicals in paint? Exposure to paint can happen by: ...

  19. Assessment of the activity of photocatalytic paint using a simple smart ink designed for high activity surfaces.

    PubMed

    Mills, Andrew; O'Rourke, Christopher; Lawrie, Katherine; Elouali, Sofia

    2014-01-01

    The use of an acid violet 7 (AV7) smart ink to assess the activity of photocatalytic paint is demonstrated. A linear correlation is established between the change in oxidized dye concentration, as measured by diffuse reflectance, and the change in the green component of the RGB color values, obtained using a portable hand-held scanner, suggesting that such tests can be monitored easily using an inexpensive piece of hand-held office equipment, as opposed to an expensive lab-based instrument, such as a diffuse reflectance UV/vis spectrophotometer. The bleaching of the AV7 follows first order kinetics, at a rate that is linearly dependent upon the UVA irradiance (0.30-3.26 mW cm(-2)). A comparison of relative rate of bleaching of the AV7 ink with the relative rate of removal of NOx, as determined using the ISO test (ISO 22197-1:2007), established a linear relationship between the two sets of results and the relevance of this correlation is discussed briefly. PMID:24320729

  20. Stylized Silk Painting.

    ERIC Educational Resources Information Center

    Skophammer, Karen

    1998-01-01

    Presents an art activity inspired by a workshop "Surrounded by Silk" given by Susan Skvoe in which the students create silk paintings. Explains that the students first sketch their floral design on paper, trace the design on the silk's surface, and apply liquid dye for color. Provides an easier activity for younger students. (CMK)

  1. The effects of a copper-based antifouling paint on mortality and enzymatic activity of a non-target marine organism.

    PubMed

    Katranitsas, A; Castritsi-Catharios, J; Persoone, G

    2003-11-01

    Antifouling paints are used on a wide range of underwater structures in order to protect them from the development of fouling organisms. The leaching of the toxic substances from the matrix of the paint causes toxic effects not only to the fouling organisms but also on other "non-target" biota. The present study addresses the impact of the antifouling paint Flexgard VI-II on brine shrimp nauplii selected as convenient test organisms. The surface to volume (S/V) concept developed by Persoone and Castritsi-Catharios (1989) was used to determine S/V-LC50s for the test biota exposed to PVC test panels of 400-1000 mm2 surface coated with the antifouling paint in test vessels containing 20 ml seawater. Total ATPase and Mg2+-ATPase were also analyzed for coated surface areas inducing less than 50% mortality in the brine shrimp nauplii. The calculated S/V-LC50 (24 h) was 24.6 mm2/ml, which shows the high toxic character of the antifouling paint. Decreased enzymatic activities were noted in the brine shrimp nauplii exposed to test panels of 50 and 100 mm2 in 20 ml seawater. The present study indicates that the "surface to volume" concept is an interesting methodology that can be applied with both lethal and sublethal effect criteria for the determination of toxic stress from leaches of painted surfaces. PMID:14607547

  2. Dye Painting!

    ERIC Educational Resources Information Center

    Johnston, Ann

    This resource provides practical instructions for applying color and design directly to fabric. Basic information about the dye painting process is given. The guide addresses the technical aspects of fabric dye and color use and offers suggestions for fabric manipulation and dye application in order to achieve various design effects. This…

  3. Perspective Painting.

    ERIC Educational Resources Information Center

    Gray, Joni

    2002-01-01

    One fourth grade class studied Van Gogh by investigating his art and life on the computer, painting still lifes, then learning to draw in perspective, creating colorful images of their own bedrooms using Van Gogh's bedroom as a model. Students extended their learning by examining relevant literature and completing timelines, biographical reports,…

  4. Chromosome painting and the accumulation of stable cytogenetic damage with age in healthy controls

    SciTech Connect

    Tucker, J.D.; Ramsey, M.J.; Lee, D.A.

    1995-11-01

    Chromosome painting is now routinely used to identify induced stable chromosomal rearrangements, which are difficult and expensive to analyze with classical cytogenetic methods. Theoretically the inherent stability of translocations, in contrast to unstable dicentrics, enables their use as a biodosimeter for chronic and temporally-displaced exposure. To quantify the effects of adverse exposure, it is important that the baseline frequency of stable aberrations be well understood. Recently we have used chromosome painting to show that translocations accumulate with age. We have now extended this study to nearly 100 subjects ranging in age from newborns (umbilical cord bloods, n=14) to adults aged 19-79 years. All subjects were healthy, had not received chemo- or radiotherapy, and had not been occupationally or accidentally exposed to radiation or chemicals. We scored the equivalent of 1000 metaphase cells for each subject, and observed an overall average of 1.36 stable aberrations per 100 cells. Stable aberrations increased significantly with age, and were observed at frequencies of 0.19{plus_minus}0.04, 0.77{plus_minus}0.07, and 2.39{plus_minus}0.24 per 100 cells in cord blood, adults aged 19 to 49, and adults over age 50, respectively. To understand the extent that lifestyle factors influence the frequency of stable aberrations, each subject (or one parent of each newborn) completed a comprehensive questionnaire inquiring about lifestyle factors such as smoking, alcohol consumption, and dietary habits. No smoking effect is apparent in adults, however newborns whose mothers smoked during pregnancy had a 2.6-fold increase in stable aberration frequencies (p=0.033). Repeat samples from a subset of the adults suggest that individual translocation frequencies change little over a period of -3 years.

  5. Holonic Manufacturing Paint Shop

    NASA Astrophysics Data System (ADS)

    Lind, Morten; Roulet-Dubonnet, Olivier; Nyen, Per Åge; Gellein, Lars Tore; Lien, Terje; Skavhaug, Amund

    In pursuit of flexibility and agility within discrete manufacturing, the surrounding logistics and handling processes of a paint shop is under construction as a laboratory prototype application. Holonic Manufacturing seems to be a promising strategic paradigm and architecture to use for a system characterised by production logistics and control. This paper describes the physical devices to be used; the desired functionality; and the basic logic control designed. Additionally, the ideas for holonification based on the already designed logic control is presented.

  6. Active thermography and post-processing image enhancement for recovering of abraded and paint-covered alphanumeric identification marks

    NASA Astrophysics Data System (ADS)

    Montanini, R.; Quattrocchi, A.; Piccolo, S. A.

    2016-09-01

    Alphanumeric marking is a common technique employed in industrial applications for identification of products. However, the realised mark can undergo deterioration, either by extensive use or voluntary deletion (e.g. removal of identification numbers of weapons or vehicles). For recovery of the lost data many destructive or non-destructive techniques have been endeavoured so far, which however present several restrictions. In this paper, active infrared thermography has been exploited for the first time in order to assess its effectiveness in restoring paint covered and abraded labels made by means of different manufacturing processes (laser, dot peen, impact, cold press and scribe). Optical excitation of the target surface has been achieved using pulse (PT), lock-in (LT) and step heating (SHT) thermography. Raw infrared images were analysed with a dedicated image processing software originally developed in Matlab™, exploiting several methods, which include thermographic signal reconstruction (TSR), guided filtering (GF), block guided filtering (BGF) and logarithmic transformation (LN). Proper image processing of the raw infrared images resulted in superior contrast and enhanced readability. In particular, for deeply abraded marks, good outcomes have been obtained by application of logarithmic transformation to raw PT images and block guided filtering to raw phase LT images. With PT and LT it was relatively easy to recover labels covered by paint, with the latter one providing better thermal contrast for all the examined targets. Step heating thermography never led to adequate label identification instead.

  7. Tractor Mechanics. Maintaining and Servicing the Engine, Learning Activity Packages 78-89; Lubricating the Tractor, Learning Activity Packages 90-94; Painting the Tractor, Learning Activity Packages 95-96.

    ERIC Educational Resources Information Center

    Clemson Univ., SC. Vocational Education Media Center.

    This series of learning activity packages focuses on three areas of tractor mechanics: (1) maintaining and servicing the engine, (2) lubricating the tractor, and (3) painting the tractor. Each of the nineteen illustrated learning activity packages follows a typical format: introduction, directions, objectives, learning activities, tools and…

  8. 40 CFR 745.65 - Lead-based paint hazards.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Lead-based paint hazards. 745.65 Section 745.65 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Hazards § 745.65 Lead-based paint hazards. (a)...

  9. Children with elevated blood lead levels related to home renovation, repair, and painting activities--New York State, 2006-2007.

    PubMed

    2009-01-30

    Although blood lead levels (BLLs) >/=10 microg/dL are associated with adverse behavioral and developmental outcomes, and environmental and medical interventions are recommended at >/=20 microg/dL, no level is considered safe. A 1997 analysis conducted by the New York State Department of Health (NYSDOH) indicated that home renovation, repair, and painting (RRP) activities were important sources of lead exposure among children with BLLs >/=20 microg/dL in New York state (excluding New York City) during 1993--1994. Subsequently, local health departments in New York state began to routinely collect information about RRP activities when investigating children's home environments for lead sources. This report updates the 1997 analysis with data from environmental investigations conducted during 2006--2007 in New York state (excluding New York City) for 972 children with BLLs >/=20 microg/dL. RRP activities were identified as the probable source of lead exposure in 139 (14%) of the 972 children. Resident owners or tenants performed 66% of the RRP work, which often included sanding and scraping (42%), removal of painted materials or structures (29%), and other activities (29%) that can release particles of lead-based paint. RRP activities continued to be an important source of lead exposure during 2006--2007. Children living in housing built before 1978 (when lead-based paint was banned from residential use) that are undergoing RRP activities should be considered at high risk for elevated BLLs, and appropriate precautions should be taken to prevent exposure. PMID:19177040

  10. The Amon Carter Museum: Paintings That Tell a Story.

    ERIC Educational Resources Information Center

    Perkins, Allison

    1993-01-01

    Presents four classroom lessons designed for elementary and secondary students based on paintings in the Amon Carter Museum in Fort Worth, Texas. Provides an overall goal, specific objectives, background of the painting, and suggestions for discussion and activities for each painting. Includes full-page color prints of each painting. (CFR)

  11. Electrically Conductive Paints for Satellites

    NASA Technical Reports Server (NTRS)

    Gilligan, J. E.; Wolf, R. E.; Ray, C.

    1977-01-01

    A program was conducted to develop and test electrically conductive paint coatings for spacecraft. A wide variety of organic and inorganic coatings were formulated using conductive binders, conductive pigments, and similar approaches. Z-93, IITRI's standard specification inorganic thermal control coating, exhibits good electrical properties and is a very space-stable coating system. Several coatings based on a conductive pigment (antimony-doped tin oxide) in silicone and silicate binders offer considerable promise. Paint systems using commercially available conductive polymers also appear to be of interest, but will require substantial development. Evaluations were made based on electrical conductivity, paint physical properties, and the stability of spectral reflectance in space environment testing.

  12. Solar paint: From synthesis to printing

    DOE PAGESBeta

    Zhou, Xiaojing; Belcher, Warwick; Dastoor, Paul

    2014-11-13

    Water-based polymer nanoparticle dispersions (solar paint) offer the prospect of addressing two of the main challenges associated with printing large area organic photovoltaic devices; namely, how to control the nanoscale architecture of the active layer and eliminate the need for hazardous organic solvents during device fabrication. We review progress in the field of nanoparticulate organic photovoltaic (NPOPV) devices and future prospects for large-scale manufacturing of solar cells based on this technology.

  13. Painting models

    NASA Astrophysics Data System (ADS)

    Baart, F.; Donchyts, G.; van Dam, A.; Plieger, M.

    2015-12-01

    The emergence of interactive art has blurred the line between electronic, computer graphics and art. Here we apply this art form to numerical models. Here we show how the transformation of a numerical model into an interactive painting can both provide insights and solve real world problems. The cases that are used as an example include forensic reconstructions, dredging optimization, barrier design. The system can be fed using any source of time varying vector fields, such as hydrodynamic models. The cases used here, the Indian Ocean (HYCOM), the Wadden Sea (Delft3D Curvilinear), San Francisco Bay (3Di subgrid and Delft3D Flexible Mesh), show that the method used is suitable for different time and spatial scales. High resolution numerical models become interactive paintings by exchanging their velocity fields with a high resolution (>=1M cells) image based flow visualization that runs in a html5 compatible web browser. The image based flow visualization combines three images into a new image: the current image, a drawing, and a uv + mask field. The advection scheme that computes the resultant image is executed in the graphics card using WebGL, allowing for 1M grid cells at 60Hz performance on mediocre graphic cards. The software is provided as open source software. By using different sources for a drawing one can gain insight into several aspects of the velocity fields. These aspects include not only the commonly represented magnitude and direction, but also divergence, topology and turbulence .

  14. Paint for detection of radiological or chemical agents

    DOEpatents

    Farmer, Joseph C.; Brunk, James L.; Day, Sumner Daniel

    2010-08-24

    A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

  15. Farmers' paintings promote family planning.

    PubMed

    1996-06-01

    Longyan Prefecture in West Fujian has a long and noble tradition of folk painting. The local authorities have made use of all forms of art, including folk painting, to promote the implementation of the family planning program. Folk painters in Longyan Prefecture have fully displayed their talent in producing numerous paintings to increase the population awareness of the public, depict people's keenness to respond to calls by the government for practicing family planning, and show the progress they have made in integrating family planning with economic development in rural areas. Most painters are farmers, while some are grassroots government officials working in towns and townships. They applied this ancient form of art to serving the great cause of controlling population growth and improving the quality of life in the country. Selected paintings were exhibited first in Fujian Province and then in Beijing, and have won several awards. Some of them were shown in Britain, America, Denmark, and the Philippines. PMID:12291692

  16. In-depth survey report: control technology for falling solids at Cincinnati Paint and Varnish, Cincinnati, Ohio

    SciTech Connect

    Heitbrink, W.A.

    1988-04-01

    A visit was made to the Cincinnati Paint and Varnish Company, Cincinnati, Ohio, to determine the effectiveness of control measures used to contain dust generated during the manufacturing of custom coatings. Dust arose when 50 pound bags of different powdered materials, titanium dioxide, talc, and crystalline silica, were emptied into 600-gallon mixing tanks by a worker. The worker slit the bags with a knife, lifted the bag, poured the contents into the mixer, and returned the empty bags to the floor. Exterior surfaces of the bags were dusty; handling them released some dust into the atmosphere. A slot hood was used to capture dust generated during the operation. Air velocity toward th slot hood along the lip of the tank where the bags were emptied ranged from 50 to 100 feet per minute. The total dust concentrations determined for crystalline silica during this operation averaged 3.0mg/cum. During a revisit to the site this worker's exposure was below 0.15mg/cum for a time-weighted average of less than 0.004 mg/m/sup 3/. The difference in liquid level in the tank at the time each powdered ingredient was added may have significantly affected the amount of dust released. Measurements of the actual process indicated that the silica had to fall almost 1 meter before reaching any liquid in the mixing tank whereas the talc had to fall only 25 centimeters.

  17. Evaluating paint-sludge chars for adsorption of selected paint solvents

    SciTech Connect

    Kim, B.R.; Kalis, E.M.; Salmeen, I.T.; Kruse, C.W.; Demir, I.; Rostam-Abadi, M.; Carlson, S.L.

    1996-06-01

    At Ford, a study had been carried out to investigate the technical feasibility of converting paint sludge to activated char and reusing the char in paint spray-booth water to capture paint solvents from spray-booth air. As part of the study, several chars were made from a paint sludge and six dried paints to evaluate their effectiveness as adsorbents by conducting a series of liquid-phase adsorption experiments. Three commonly-used paint solvents and p-nitrophenol were selected as adsorbates. The three paint solvents were toluene, 2-methyl-1-propanol (iso-butanol), and 2-butoxyethanol (butylcellosolve). In this paper, the results of the pyrolysis and adsorption experiments are presented along with practical implications. The primary findings include the following: (1) Black-paint chars showed substantially larger surface area and higher adsorption capacity (based on total weight) than white-paint chars which had high ash contents due to the white pigment, titanium dioxide; (2) the adsorption capacity of the paint-sludge char was between those of black-paint and white-paint chars, and was 5--20% that of a commercial activated carbon; (3) titanium dioxide in white-paint chars did not improve the chars` affinity for hydrophilic compounds such as 2-methyl-1-propanol and 2-butoxyethanol; (4) coal could be added to paint sludge to improve the quality of the resulting char and to reduce ash content; and (5) the pyrolysis of paint sludge could present an attractive opportunity for reusing and recycling a waste product for pollution abatement and as a vehicle component.

  18. Paint Scaler. Innovative Technology Summary Report

    SciTech Connect

    2000-06-01

    The Paint Scaler can collect paint samples quickly and efficiently for lab analysis. The Rotary Hammer Drill is a 24-V battery operated, 3/4-in. rotary hammer drill. When used with an optional chipping adapter, the Bosch Rotary Hammer Drill can be used to perform chipping and chiseling tasks such as paint removal from either concrete or metal surfaces. It is ultra-compact, lightweight with an ergonomic balanced grip. The battery operation gives the operator more flexibility during sampling activities.

  19. Acute effect of indoor exposure to paint containing bis(tributyltin) oxide--Wisconsin, 1991

    SciTech Connect

    Not Available

    1991-05-03

    In January 1991, a woman in Wisconsin contacted her local public health department to report that she and her two children had become ill after her landlord painted the walls and ceilings of two rooms of her apartment. Reported symptoms included a burning sensation in the nose and forehead, headache, nose bleed, cough, loss of appetite, nausea, and vomiting. The woman, who was in the third trimester of pregnancy, also complained of a persistent odor from the paint and provided an empty bottle of a paint additive used for mildew control. The label indicated that this product contained 25% bis(tributyltin) oxide (TBTO) as its only active ingredient.

  20. Three-dimensional reconstruction of painted human interphase chromosomes: active and inactive X chromosome territories have similar volumes but differ in shape and surface structure

    PubMed Central

    1996-01-01

    This study provides a three-dimensional (3D) analysis of differences between the 3D morphology of active and inactive human X interphase chromosomes (Xa and Xi territories). Chromosome territories were painted in formaldehyde-fixed, three-dimensionally intact human diploid female amniotic fluid cell nuclei (46, XX) with X-specific whole chromosome compositive probes. The colocalization of a 4,6-diamidino-2- phenylindole dihydrochloride-stained Barr body with one of the two painted X territories allowed the unequivocal discrimination of the inactive X from its active counterpart. Light optical serial sections were obtained with a confocal laser scanning microscope. 3D- reconstructed Xa territories revealed a flatter shape and exhibited a larger and more irregular surface when compared to the apparently smoother surface and rounder shape of Xi territories. The relationship between territory surface and volume was quantified by the determination of a dimensionless roundness factor (RF). RF and surface area measurements showed a highly significant difference between Xa and Xi territories (P < 0.001) in contrast to volume differences (P > 0.1). For comparison with an autosome of similar DNA content, chromosome 7 territories were additionally painted. The 3D morphology of the chromosome 7 territories was similar to the Xa territory but differed strongly from the Xi territory with respect to RF and surface area (P < 0.001). PMID:8978813

  1. Evaluation of low copper content antifouling paints containing natural phenolic compounds as bioactive additives.

    PubMed

    Pérez, Miriam; García, Mónica; Blustein, Guillermo

    2015-08-01

    Cuprous oxide is the most commonly used biocide in antifouling paints. However, copper has harmful effects not only on the fouling community but also on non-target species. In the current study, we investigated the use of thymol, eugenol and guaiacol in this role combined with small quantities of copper. Phenolic compounds were tested for anti-settlement activity against cyprid larvae of the barnacle Balanus amphitrite and for their toxicity to nauplius larvae. Thymol, eugenol and guaiacol were active for anti-settlement but guaiacol had the disadvantage of being toxic to nauplius larvae. However, all of them showed therapeutic ratio>1. Antifouling paints with thymol (low copper content/thymol, LCP/T), eugenol (low copper content/eugenol, LCP/E) and guaiacol (low copper content/guaiacol, LCP/G) combined with small copper content were formulated for field trials. After 12 months exposure in the sea, statistical analysis revealed that LCP/T and LCP/E paints were the most effective combinations and had similar performances to control paints with high copper content (traditional cuprous oxide based paints). In contrast, LCP/G paint was only partially effective in preventing and inhibiting biofouling and was colonized by some hard and soft foulers. However, this antifouling paint was effective against calcareous tubeworm Hydroides elegans. In the light of various potential applications, thymol, eugenol and guaiacol have thus to be considered in future antifouling formulations. PMID:26210408

  2. Pressure Sensitive Paints

    NASA Technical Reports Server (NTRS)

    Liu, Tianshu; Bencic, T.; Sullivan, J. P.

    1999-01-01

    This article reviews new advances and applications of pressure sensitive paints in aerodynamic testing. Emphasis is placed on important technical aspects of pressure sensitive paint including instrumentation, data processing, and uncertainty analysis.

  3. Paints and Preservatives.

    ERIC Educational Resources Information Center

    Powell, Larry E.; Miller, Larry E.

    The publication contains an outline for use by agriculture teachers in developing a teaching plan for a unit on paints and preservatives. The topics included are (1) recognizing, solving, and preventing paint problems and (2) operating and using power spray painting equipment. Items presented for each topic are: the situation, (intended to inform…

  4. I Can Paint!

    ERIC Educational Resources Information Center

    Hart, Kate; Bower, Robin, Ed.

    This book gives detailed information concerning the use of tools and media of paint. It aims at developing skills and knowledge that will allow young students to express themselves by painting. The book is organized into five sections with subheadings, including: (1) "Introduction"; (2) "Exploring Paint As We Use..." with subheadings: "Hands";…

  5. Robot Mounted Laser Scanner For Paint Inspection

    NASA Astrophysics Data System (ADS)

    West, R. N.; Baker, L. R.; Atkinson, R. M.; Claridge, J. F.

    1989-01-01

    The final inspection of manufactured goods is a labour intensive activity. The use of human inspectors has a number of potential disadvantages; it can be expensive, the inspection standard applied is subjective and the inspection process can be slow compared with the production process. The use of automatic optical and electronic systems to perform the inspection task is now a growing practice but, in general, such systems have been applied to small components which are accurately presented. Recent advances in vision systems and robot control technology have made possible the installation of an automated paint inspection system at the Austin Rover Group's plant at Cowley, Oxford.

  6. Effect of thinner inhalation on lipid peroxidation and some antioxidant enzymes of people working with paint thinner.

    PubMed

    Halifeoglu, I; Canatan, H; Ustundag, B; Ilhan, N; Inanc, F

    2000-12-01

    Paint thinner is a commonly used industrial solvent with considerable potential for abuse by inhalation. Paint thinner is taken into the body by inhalation or by contact with the skin. Paint thinner is oxidized gradually by cytochrome P450-dependent monooxygenase and consequently free radicals are produced. In the present study we measured plasma malondialdehyde (MDA, a product of lipid peroxidation) levels as an indicator of oxidative damage and activity levels of antioxidant enzymes gluthatione peroxidase (GSH-Px) and superoxide dismutase (SOD) in erythrocytes of a group of people (n = 18) working with paint thinner. The control group was composed of 18 healthy adults. There was a statistically significant (p < 0.001) increase in MDA (2.0+/-0.7 nmol ml(-1)) and GSH-Px (86.5+/-16.6 U g(-1) Hb) activity levels in people working with paint thinner compared with control subjects (MDA: 1.0+/-0.3 nmol ml(-1); GSH-Px: 53.9+/-14.5 U g(-1) Hb). Similarly, there was also an increase (p < 0.05) in the SOD levels (1079+/-214.6 U g(-1) Hb) of people working with paint thinner compared with controls (953.3+/-46.7 U g(-1) Hb). Based on our results, it can be concluded that paint thinner inhalation may increase lipid peroxidation and consequently induce antioxidant enzymes. PMID:11180289

  7. High-solids paint overspray aerosols in a spray painting booth: particle size analysis and scrubber efficiency

    SciTech Connect

    Chan, T.L.; D'arcy, J.B.; Schreck, R.M.

    1986-07-01

    Particle size distributions of high-solids acrylic-enamel paint overspray aerosols were determined isokinetically in a typical downdraft spray painting booth in which a 7-stage cascade impactor was used. Three different industrial paint atomizers were used, and the paint aerosols were characterized before and after a paint both scrubber. The mass median aerodynamic diameter (MMAD) of a metallic basecoat and an acrylic clearcoat paint aerosol from air-atomized spray guns ranged from 4-12 ..mu..m and was dependent on atomization pressure. When the paint booth was operated under controlled conditions simulating those in a plant, the collection efficiency of paint overspray aerosols by a paint scrubber was found to be size dependent and decreased sharply for particles smaller than 2 ..mu..m to as low as 64% for clearcoat paint particles of 0.6 ..mu..m. Improvement in the overall particulate removal efficiency can be achieved by optimizing the spray painting operations so as to produce the least amount of fine overspray paint aerosols less than 2 ..mu..m. Maintaining a higher static pressure drop across the paint both scrubber also will improve scrubber performance.

  8. Structural Color Painting by Rubbing Particle Powder

    NASA Astrophysics Data System (ADS)

    Park, Choojin; Koh, Kunsuk; Jeong, Unyong

    2015-02-01

    Structural colors originate from purely physical structures. Scientists have been inspired to mimic the structures found in nature, the realization of these structures still presents a great challenge. We have recently introduced unidirectional rubbing of a dry particle powder on a rubbery surface as a quick, highly reproducible means to fabricate a single crystal monolayer assembly of particles over an unlimited area. This study extends the particle-rubbing process to a novel fine-art painting, structural color painting (SCP). SCP is based on structural coloring with varying iridescence according to the crystal orientation, as controlled by the rubbing direction. This painting technique can be applied on curved surfaces, which enriches the objects to be painted and helps the painter mimic the structures found in nature. It also allows for quick fabrication of complicated particle-assembly patterns, which enables replication of paintings.

  9. Structural Color Painting by Rubbing Particle Powder

    PubMed Central

    Park, ChooJin; Koh, Kunsuk; Jeong, Unyong

    2015-01-01

    Structural colors originate from purely physical structures. Scientists have been inspired to mimic the structures found in nature, the realization of these structures still presents a great challenge. We have recently introduced unidirectional rubbing of a dry particle powder on a rubbery surface as a quick, highly reproducible means to fabricate a single crystal monolayer assembly of particles over an unlimited area. This study extends the particle-rubbing process to a novel fine-art painting, structural color painting (SCP). SCP is based on structural coloring with varying iridescence according to the crystal orientation, as controlled by the rubbing direction. This painting technique can be applied on curved surfaces, which enriches the objects to be painted and helps the painter mimic the structures found in nature. It also allows for quick fabrication of complicated particle-assembly patterns, which enables replication of paintings. PMID:25661669

  10. Pigeons' discrimination of paintings by Monet and Picasso

    PubMed Central

    Watanabe, Shigeru; Sakamoto, Junko; Wakita, Masumi

    1995-01-01

    Pigeons successfully learned to discriminate color slides of paintings by Monet and Picasso. Following this training, they discriminated novel paintings by Monet and Picasso that had never been presented during the discrimination training. Furthermore, they showed generalization from Monet's to Cezanne's and Renoir's paintings or from Picasso's to Braque's and Matisse's paintings. These results suggest that pigeons' behavior can be controlled by complex visual stimuli in ways that suggest categorization. Upside-down images of Monet's paintings disrupted the discrimination, whereas inverted images of Picasso's did not. This result may indicate that the pigeons' behavior was controlled by objects depicted in impressionists' paintings but was not controlled by objects in cubists' paintings. PMID:16812755

  11. Managing lead-based paint abatement wastes

    SciTech Connect

    Steele, N.L.C.

    1994-12-31

    Renovation, remodeling, demolition, and surface preparation for painting, in addition to specified lead abatement, are all activities that have the potential to produce hazardous wastes if a property was painted with lead-based paint. Lead-based paint was used on residential structures until 1978, when most residential uses were banned by the Consumer Products Safety Council. Prior to the 1950s, paints for residential uses may have contained up to 50% lead by weight. Today, commercial and military paints may still contain lead and can be used on non-residential structures. The lead content of residential paints is limited to 0.06% lead (by weight) in the dried film. This paper provides an overview of some of the information needed to properly manage lead-based paint abatement wastes. The issues covered in this paper include waste classification, generator status, treatment, and land disposal restrictions. The author assumes that the reader is familiar with the provision of the Health and Safety Code and the California Code of Regulations that pertain to generation and management of hazardous wastes. Citations provided herein do not constitute an exhaustive list of all the regulations with which a generator of hazardous waste must comply.

  12. Human Health Risk of Ingested Nanoparticles That Are Added as Multifunctional Agents to Paints: an In Vitro Study

    PubMed Central

    Kaiser, Jean-Pierre; Roesslein, Matthias; Diener, Liliane; Wick, Peter

    2013-01-01

    Microorganisms growing on painted surfaces are not only an aesthetic problem, but also actively contribute to the weathering and deterioration of materials. A widely used strategy to combat microbial colonization is the addition of biocides to the paint. However, ecotoxic, non-degradable biocides with a broad protection range are now prohibited in Europe, so the paint industry is considering engineered nanoparticles (ENPs) as an alternative biocide. There is concern that ENPs in paint might be released in run-off water and subsequently consumed by animals and/or humans, potentially coming into contact with cells of the gastrointestinal tract and affecting the immune system. Therefore, in the present study we evaluated the cytotoxic effects of three ENPs (nanosilver, nanotitanium dioxide and nanosilicon dioxide) that have a realistic potential for use in paints in the near future. When exposed to nanotitanium dioxide and nanosilicon dioxide in concentrations up to 243 µg/mL for 48 h, neither the gastrointestinal cells (CaCo-2) nor immune system cells (Jurkat) were significantly affected. However, when exposed to nanosilver, several cell parameters were affected, but far less than by silver ions used as a control. No differences in cytotoxicity were observed when cells were exposed to ENP-containing paint particles, compared with the same paint particles without ENPs. Paint particles containing ENPs did not affect cell morphology, the release of reactive oxygen species or cytokines, cell activity or cell death in a different manner to the same paint particles without ENPs. The results suggest that paints doped with ENPs do not pose an additional acute health hazard for humans. PMID:24358264

  13. Oil-based paint poisoning

    MedlinePlus

    Paint - oil based - poisoning ... Hydrocarbons are the primary poisonous ingredient in oil paints. Some oil paints have heavy metals such as lead, mercury, cobalt, and barium added as pigment. These heavy metals can cause additional ...

  14. Pollock without Paint?

    ERIC Educational Resources Information Center

    Sutley, Jane

    2011-01-01

    This article describes how the author exposes her students to the world of Jackson Pollock, the artist who brings to mind dripping, meandering, splashing puddles of paint. Pollock's action paintings of the late 1940s-'50s call out for unfettered movement, fluidity, and freedom of application. Is it even possible to capture the action, rhythm and…

  15. Watercolor paints - swallowing

    MedlinePlus

    ... If the person swallowed the paint, give them water or milk right away, unless a provider tells you not to. DO NOT give anything to drink if the person has symptoms that make it ... Use soap and water to wash any paint off skin and clothes.

  16. Jasper Johns' Painted Words.

    ERIC Educational Resources Information Center

    Levinger, Esther

    1989-01-01

    States that the painted words in Jasper Johns' art act in two different capacities: concealed words partake in the artist's interrogation of visual perception; and visible painted words question classical representation. Argues that words are Johns' means of critiquing modernism. (RS)

  17. Paint-Stirrer Submarine

    ERIC Educational Resources Information Center

    Young, Jocelyn; Hardy, Kevin

    2007-01-01

    In this article, the authors discuss a unique and challenging laboratory exercise called, the paint-stir-stick submarine, that keeps the students enthralled. The paint-stir-stick submarine fits beautifully with the National Science Education Standards Physical Science Content Standard B, and with the California state science standards for physical…

  18. Method for warning of radiological and chemical agents using detection paints on a vehicle surface

    DOEpatents

    Farmer, Joseph C.; Brunk, James L.; Day, S. Daniel

    2012-03-27

    A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

  19. Aerial vehicle with paint for detection of radiological and chemical warfare agents

    DOEpatents

    Farmer, Joseph C.; Brunk, James L.; Day, S. Daniel

    2013-04-02

    A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

  20. Experimental evaluation of insecticidal paints against Triatoma infestans (Hemiptera: Reduviidae), under natural climatic conditions

    PubMed Central

    Amelotti, Ivana; Catalá, Silvia S; Gorla, David E

    2009-01-01

    Background Triatoma infestans is the main vector of Chagas disease in the Gran Chaco region of South America. The traditional spraying technique used for the application of pyrethroid insecticides has shown low efficiency in the elimination of the vector species populations occupying peridomestic structures of rural houses in the endemic area of Argentina. As part of studies looking for better alternatives, we evaluated the residual effect of insecticidal paints on the mortality of fourth instar nymphs of T. infestans. Results The study was based on an experimental design that included two groups treated with an organophosphate (Inesfly 5A IGR™) and a pyrethroid (Inesfly 5A IGR NG™) formulations of the paint, that were applied on wood, cement blocks and adobe bricks under natural climatic conditions. A third group was an untreated control. Both paint formulations showed very long residual activity, producing mortality of 84% and 98% (pyrethroid and organophosphate formulations, respectively) after 12 months of the paint application. After eight months, nymphs exposed during 6 hours to the painted surfaces with the pyrethroid and organophosphate formulations showed 81.33% and 100% mortality, respectively. Conclusion The organophosphate- and pyrethroid-based insecticidal paints showed a very long residual activity on the mortality of fourth instar nymphs of T infestans, compared with the traditional spraying technique used for the application of pyrethroid insecticides in peridomestic structures of rural houses in the endemic region for Chagas disease in the Gran Chaco of Argentina. The application of the paints by trained personnel of the vector control programmes could be considered as an alternative control tool in areas where the traditional methods have failed or showed low efficacy. PMID:19586532

  1. Effects Of Moisture On Zinc Orthotitanate Paint

    NASA Technical Reports Server (NTRS)

    Mon, Gordon R.; Gonzalez, Charles C.; Ross, JR., Ronald g.; Wen, Liang C.; O'Donnell, Timothy

    1991-01-01

    Report presents results of tests of electrical conductivity and resistance to corrosion of zinc orthotitanate (ZOT) paint. Measured effects of temperature, humidity, and vacuum on ceramic paint. Used as temperature-control coating designed to have low and stable ratio of absorptance to emittance for heat radiation. Helps to prevent buildup of static electric charge and helps to protect electronic circuitry from potentially damaging static discharges.

  2. Active control of convection

    SciTech Connect

    Bau, H.H.

    1995-12-31

    Using stability theory, numerical simulations, and in some instances experiments, it is demonstrated that the critical Rayleigh number for the bifurcation (1) from the no-motion (conduction) state to the motion state and (2) from time-independent convection to time-dependent, oscillatory convection in the thermal convection loop and Rayleigh-Benard problems can be significantly increased or decreased. This is accomplished through the use of a feedback controller effectuating small perturbations in the boundary data. The controller consists of sensors which detect deviations in the fluid`s temperature from the motionless, conductive values and then direct actuators to respond to these deviations in such a way as to suppress the naturally occurring flow instabilities. Actuators which modify the boundary`s temperature/heat flux are considered. The feedback controller can also be used to control flow patterns and generate complex dynamic behavior at relatively low Rayleigh numbers.

  3. Neutron activation autoradiography and scanning macro-XRF of Rembrandt van Rijn's Susanna and the Elders (Gemäldegalerie Berlin): a comparison of two methods for imaging of historical paintings with elemental contrast

    NASA Astrophysics Data System (ADS)

    Alfeld, Matthias; Laurenze-Landsberg, Claudia; Denker, Andrea; Janssens, Koen; Noble, Petria

    2015-06-01

    Imaging methods with elemental contrast are of great value for the investigation of historical paintings, as they allow for study of sub-surface layers that provide insight into a painting's creation process. Two of the most important methods are neutron activation autoradiography (NAAR) and scanning macro-XRF (MA-XRF). Given the differences between these methods in the fundamental physical phenomena exploited, a theoretical comparison of their capabilities is difficult and until now a critical comparison of their use on the same painting is missing. In this paper, we present a study of Rembrandt van Rijn's painting Susanna and the Elders from the Gemäldegalerie in Berlin employing both techniques. The painting features a considerable number of overpainted features and a wide range of pigments with different elemental tracers, including earth pigments (Mn/Fe), Azurite (Cu), lead white (Pb), vermilion (Hg) and smalt (Co, As). MA-XRF can detect all elements above Si ( Z = 14), suffers from few spectral overlaps and can be performed in a few tens of hours in situ, i.e. in a museum. NAAR requires the stay of the painting at a research facility for several weeks, and inter-element interferences can be difficult to resolve. Also, only a limited number of elements contribute to the acquired autoradiographs, most notably Mn, Cu, As, Co, Hg and P. However, NAAR provides a higher lateral resolution and is less hindered by absorption in covering layers, which makes it the only method capable of visualizing P in lower paint layers.

  4. Active weld control

    NASA Technical Reports Server (NTRS)

    Powell, Bradley W.; Burroughs, Ivan A.

    1994-01-01

    Through the two phases of this contract, sensors for welding applications and parameter extraction algorithms have been developed. These sensors form the foundation of a weld control system which can provide action weld control through the monitoring of the weld pool and keyhole in a VPPA welding process. Systems of this type offer the potential of quality enhancement and cost reduction (minimization of rework on faulty welds) for high-integrity welding applications. Sensors for preweld and postweld inspection, weld pool monitoring, keyhole/weld wire entry monitoring, and seam tracking were developed. Algorithms for signal extraction were also developed and analyzed to determine their application to an adaptive weld control system. The following sections discuss findings for each of the three sensors developed under this contract: (1) weld profiling sensor; (2) weld pool sensor; and (3) stereo seam tracker/keyhole imaging sensor. Hardened versions of these sensors were designed and built under this contract. A control system, described later, was developed on a multiprocessing/multitasking operating system for maximum power and flexibility. Documentation for sensor mechanical and electrical design is also included as appendices in this report.

  5. Paint spray tests for respirators: aerosol characteristics.

    PubMed

    Ackley, M W

    1980-05-01

    Liquid paint is sprayed from an atomizing nozzle to form an aerosol for testing paint spray respirators. The generated aerosol conditions are dependent upon liguid properties, spray-nozzle flow conditions and droplet evaporation. A technique was developed for controlling the aerosol concentrations reliably. Particle-size distributions of lacquer and enamel have been measured. The lacquer distribution was found to be multi-modal. Aerosol concentration dradients arise when the nozzle is not properly positioned. Filter loading resistance is significantly affected by these concentration variations. With regard to selection of standard aerosol test be improved by modifying the current NIOSH criteria to include a description of the particle-size distribution, a more precise definition of the paint and paint thinner chemical compositions, and a narrower concentration range. PMID:6932174

  6. Multiscale effect of paint pulverization orientation on appearance after painting

    NASA Astrophysics Data System (ADS)

    Mezghani, S.; Zahouani, H.; Piezanowski, J.

    2011-08-01

    The perceived quality of a vehicle is strongly affected by paint appearance that shares major part of the outer car body panels. The painting process modifies the surface topography in a wide range of roughness and waviness scales, and consequently modifies the functionality of the surface in terms of appearance. Since painting process is a multistage process leading to stratified surfaces, a multiscale surface topography characterization approach is suited. In this paper, 2D multiscale signature of the painting process was introduced and applied to track the effect of the painting process working variable on painted surface topography in a wide range of wavelength. To this aim, experimental painting tests were performed using three painting orientation modes (horizontal, oblique and vertical) on random and deterministic metal sheet surface textures. Results show that the painting orientation mode affect only the wavelength band greater than 500 μm and optimal painting orientation depends strongly on the texture of the initial sheet surface.

  7. Active Control of Engine Dynamics

    NASA Astrophysics Data System (ADS)

    2002-11-01

    Active control can alleviate design constraints and improve the response to operational requirements in gas turbines. The Course presented the state-of-the-art including experimental, theoretical knowledge and practical information. Topics treated: stability characteristics; active control approaches; robustness and fundamental limits; combustion systems processes; combustor dynamics; compression system dynamics models; diagnostics and control of compression instabilities; sensor and actuator architectures; R&D needs of future prospects. The course has shown that for combustion systems, as well as in actuator and sensor technologies the active control approach is a viable option even at full scale with potential for aero engines and air breathing missiles.

  8. Paint-Overspray Catcher

    NASA Technical Reports Server (NTRS)

    Weinstein, Leonard M.

    2003-01-01

    An apparatus to catch paint overspray has been proposed. Overspray is an unavoidable parasitic component of spray that occurs because the flow of air or other gas in the spray must turn at the sprayed surface. Very small droplets are carried away in this turning flow, and some land on adjacent surfaces not meant to be painted. The basic principle of the paint-spray catcher is to divert the overspray into a suction system at the boundary of the area to be painted. The paint-spray catcher (see figure) would include a toroidal plenum connected through narrow throat to a nozzle that would face toward the center of the torus, which would be positioned over the center of the area to be spray-painted. The plenum would be supported by four tubes that would also serve as suction exhaust ducts. The downstream ends of the tubes (not shown in the figure) would be connected to a filter on a suction pump. The pump would be rated to provide a suction mass flow somewhat greater than that of the directed spray gas stream, so that the nozzle would take in a small excess of surrounding gas and catch nearly all of the overspray. A small raised lip at the bottom edge of the nozzle would catch paint that landed inside the nozzle. Even if the paint is directly piston pumped, the droplets entrain an air flow by time they approach the wall, so there is always a gas stream to carry the excess droplets to the side. For long-duration spraying operations, it could be desirable to include a suction-drain apparatus to prevent overflowing and dripping of paint from inside the lip. A version without an external contraction and with the throat angled downward would be a more compact version of catcher, although it might be slightly less efficient.

  9. Comets in Bushman Paintings

    NASA Astrophysics Data System (ADS)

    Fraser, B.

    2007-07-01

    About ten years ago I was asked to give a talk on African astronomical folklore and spent many hours reading up on the subject. My queries eventually led me to Bert Woodhouse, a member of the archaeological society and well-known recorder of Bushman paintings. He has published seven books on Bushman paintings and has a collection of over 30 000 slides covering all aspects of the subject. One section of his collection is labeled "comets" and he kindly made copies of these slides for me to use in that talk. This paper highlights those slides and discusses the objects depicted in the paintings.

  10. A Robot Based Automatic Paint Inspection System

    NASA Astrophysics Data System (ADS)

    Atkinson, R. M.; Claridge, J. F.

    1988-06-01

    The final inspection of manufactured goods is a labour intensive activity. The use of human inspectors has a number of potential disadvantages; it can be expensive, the inspection standard applied is subjective and the inspection process can be slow compared with the production process. The use of automatic optical and electronic systems to perform the inspection task is now a growing practice but, in general, such systems have been applied to small components which are accurately presented. Recent advances in vision systems and robot control technology have made possible the installation of an automated paint inspection system at the Austin Rover Group's plant at Cowley, Oxford. The automatic inspection of painted car bodies is a particularly difficult problem, but one which has major benefits. The pass line of the car bodies is ill-determined, the surface to be inspected is of varying surface geometry and only a short time is available to inspect a large surface area. The benefits, however, are due to the consistent standard of inspection which should lead to lower levels of customer complaints and improved process feedback. The Austin Rover Group initiated the development of a system to fulfil this requirement. Three companies collaborated on the project; Austin Rover itself undertook the production line modifications required for body presentation, Sira Ltd developed the inspection cameras and signal processing system and Unimation (Europe) Ltd designed, supplied and programmed the robot system. Sira's development was supported by a grant from the Department of Trade and Industry.

  11. Contemporary Poetry about Painting.

    ERIC Educational Resources Information Center

    Brown, Carl R. V.

    1992-01-01

    Asserts that teachers of contemporary literature should enjoy the advantages of poetry written in response to, or interpreting, paintings or other works of art. Illustrates the advantages of such poetry with two examples. (PRA)

  12. Chromate Dermatitis from Paint

    PubMed Central

    Engel, H. O.; Calnan, C. D.

    1963-01-01

    Among 250 workers engaged on wet sandpapering of primer paint on car bodies 65 developed a contact dermatitis. The average latent period before dermatitis developed was 4·6 months: only 60% of the patients made a completely satisfactory recovery. The average duration of dermatitis was 5·3 months. Two thirds of the men used one of two barrier creams supplied, while one third used none. Routine patch testing showed that the majority was allergic to chromate. It was found that a primer paint contained zinc chromate, which had been introduced into the paint by the manufacturers shortly before the first cases occurred. Removal of chromate from the paint resulted in a prompt cessation of new cases of dermatitis. Images PMID:14046155

  13. Artists Paint ... Landscapes

    ERIC Educational Resources Information Center

    Herberholz, Barbara

    2012-01-01

    This article features the painting "View of Toledo," based on Toledo, a very old city located on a high plateau in Spain. By the time the artist El Greco painted the picture, he had lived there for 31 years. When one looks at the picture, one will see a storm approaching and will see the city as if it were lit by a flash of lightning. What main…

  14. Controls Considerations for Turbine Active Clearance Control

    NASA Technical Reports Server (NTRS)

    Melcher, Kevin J.

    2004-01-01

    This presentation discusses active control of turbine tip clearance from a control systems perspective. It is a subset of charts that were presented at the 2003 meeting of the International Society of Air Breathing Engines which was held August 31 through September 5 in Cleveland, Ohio. The associated reference paper is cited at the end of the presentation. The presentation describes active tip clearance control research being conducted by NASA to improve turbine engine systems. The target application for this effort is commercial aircraft engines. However, it is believed that the technologies developed as part of this research will benefit a broad spectrum of current and future turbomachinery. The first part of the presentation discusses the concept of tip clearance, problems associated with it, and the benefits of controlling it. It lays out a framework for implementing tip clearance controls that enables the implementation to progress from purely analytical to hardware-in-the-loop to fully experimental. And it briefly discusses how the technologies developed will be married to the previously described ACC Test Rig for hardware-in-the-loop demonstrations. The final portion of the presentation, describes one of the key technologies in some detail by presenting equations and results for a functional dynamic model of the tip clearance phenomena. As shown, the model exhibits many of the clearance dynamics found in commercial gas turbine engines. However, initial attempts to validate the model identified limitations that are being addressed to make the model more realistic.

  15. ESTE Project Brief: Environmental and Sustainable Technology Evaluations (ESTE): Verification of Qualitative Spot Test Kits for Lead in Paint

    EPA Science Inventory

    On April 22, 2008, EPA issued the final Lead; Renovation, Repair, and Painting (RRP) Program Rule. The rule addresses lead-based paint hazards created by renovation, repair, and painting activities that disturb lead-based paint in target housing and child-occupied facilities. Und...

  16. Investigating shoulder muscle loading and exerted forces during wall painting tasks: influence of gender, work height and paint tool design.

    PubMed

    Rosati, Patricia M; Chopp, Jaclyn N; Dickerson, Clark R

    2014-07-01

    The task of wall painting produces considerable risk to the workers, both male and female, primarily in the development of upper extremity musculoskeletal disorders. Insufficient information is currently available regarding the potential benefits of using different paint roller designs or the possible adverse effects of painting at different work heights. The aim of this study was to investigate the influence of gender, work height, and paint tool design on shoulder muscle activity and exerted forces during wall painting. Ten young adults, five male and five female, were recruited to perform simulated wall painting at three different work heights with three different paint roller designs while upper extremity muscle activity and horizontal push force were recorded. Results demonstrated that for female participants, significantly greater total average (p = 0.007) and integrated (p = 0.047) muscle activity was present while using the conventional and curly flex paint roller designs compared to the proposed design in which the load was distributed between both hands. Additionally, for both genders, the high working height imposed greater muscular demands compared to middle and low heights. These findings suggest that, if possible, avoid painting at extreme heights (low or high) and that for female painters, consider a roller that requires the use of two hands; this will reduce fatigue onset and subsequently mitigate potential musculoskeletal shoulder injury risks. PMID:24636728

  17. Impact on the environment from steel bridge paint deterioration using lead isotopic tracing, paint compositions and soil deconstruction.

    PubMed

    Gulson, Brian; Chiaradia, Massimo; Davis, Jeffrey; O'Connor, Gary

    2016-04-15

    Deterioration and repair of lead paint on steel structures can result in contamination of the ambient environment but other sources of lead such as from past use of leaded paint and gasoline and industrial activities can also contribute to the contamination. Using a combination of high precision lead isotopic tracing, detailed paint examination, including with scanning electron microscopy, and soil deconstruction we have compared paint on a steel bridge and bulk soil and lead-rich particles separated from soil. The majority of Pb found in the paint derives from Australian sources but some also has a probable US origin. The isotopic data for the bulk soils and selected particles lie on a mixing line with end members the geologically ancient Broken Hill lead and possible European lead which is suggested to be derived from old lead paint and industrial activities. Data for gasoline-derived particulates lie on this array and probably contribute to soil Pb. Although paint from the bridge can be a source of lead in the soils, isotopic tracing, paint morphology and mineralogical identification indicate that other sources, including from paint, gasoline and industrial activities, are contributing factors to the lead burden. Even though physical characteristics and elemental composition are the same in some particles, the isotopic signatures demonstrate that the sources are different. Plots using (206)Pb/(208)Pb vs (206)Pb/(207)Pb ratios, the common representation these days, do not allow for source discrimination in this investigation. PMID:26803686

  18. International forensic automotive paint database

    NASA Astrophysics Data System (ADS)

    Bishea, Gregory A.; Buckle, Joe L.; Ryland, Scott G.

    1999-02-01

    The Technical Working Group for Materials Analysis (TWGMAT) is supporting an international forensic automotive paint database. The Federal Bureau of Investigation and the Royal Canadian Mounted Police (RCMP) are collaborating on this effort through TWGMAT. This paper outlines the support and further development of the RCMP's Automotive Paint Database, `Paint Data Query'. This cooperative agreement augments and supports a current, validated, searchable, automotive paint database that is used to identify make(s), model(s), and year(s) of questioned paint samples in hit-and-run fatalities and other associated investigations involving automotive paint.

  19. Reading Through Paint

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Two-dimensional data matrix symbols, which contain encoded letters and numbers, are permanently etched on items for identification. They can store up to 100 times more information than traditional bar codes. While the symbols provide several advantages over bar codes, once they are covered by paint they can no longer be read by optical scanners. Since most products are painted eventually, this presents a problem for industries relying on the symbols for identification and tracking. In 1987, NASA s Marshall Space Flight Center began studying direct parts marking with matrix symbols in order to track millions of Space Shuttle parts. Advances in the technology proved that by incorporating magnetic properties into the paints, inks, and pastes used to apply the matrix symbols, the codes could be read by a magnetic scanner even after being covered with paint or other coatings. NASA received a patent for such a scanner in 1998, but the system it used for development was not portable and was too costly. A prototype was needed as a lead-in to a production model. In the summer of 2000, NASA began seeking companies to build a hand-held scanner that would detect the Read Through Paint data matrix identification marks containing magnetic materials through coatings.

  20. Optical control of antibacterial activity

    NASA Astrophysics Data System (ADS)

    Velema, Willem A.; van der Berg, Jan Pieter; Hansen, Mickel J.; Szymanski, Wiktor; Driessen, Arnold J. M.; Feringa, Ben L.

    2013-11-01

    Bacterial resistance is a major problem in the modern world, stemming in part from the build-up of antibiotics in the environment. Novel molecular approaches that enable an externally triggered increase in antibiotic activity with high spatiotemporal resolution and auto-inactivation are highly desirable. Here we report a responsive, broad-spectrum, antibacterial agent that can be temporally activated with light, whereupon it auto-inactivates on the scale of hours. The use of such a ‘smart’ antibiotic might prevent the build-up of active antimicrobial material in the environment. Reversible optical control over active drug concentration enables us to obtain pharmacodynamic information. Precisely localized control of activity is achieved, allowing the growth of bacteria to be confined to defined patterns, which has potential for the development of treatments that avoid interference with the endogenous microbial population in other parts of the organism.

  1. 37. INTERIOR VIEW, PAINTING AREA SHOWING PAINT VAT AND CONVEYOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. INTERIOR VIEW, PAINTING AREA SHOWING PAINT VAT AND CONVEYOR LINE WITH THE TOOLS HANGING FROM HOOKS TO DRY; NOTE PINCH POINT CROW BARS (CENTER) - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV

  2. 1. Photocopy of painting (original painting in possesion of the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photocopy of painting (original painting in possesion of the family of Judge Jasper Brinton, Cairo, Egypt) Thomas Eakins, Artist 1878 SIDE AND FRONT ELEVATIONS - Brinton 1704 House, Oakland Road (Birmingham Township), Dilworthtown, Chester County, PA

  3. Demonstration of Active Combustion Control

    NASA Technical Reports Server (NTRS)

    Lovett, Jeffrey A.; Teerlinck, Karen A.; Cohen, Jeffrey M.

    2008-01-01

    The primary objective of this effort was to demonstrate active control of combustion instabilities in a direct-injection gas turbine combustor that accurately simulates engine operating conditions and reproduces an engine-type instability. This report documents the second phase of a two-phase effort. The first phase involved the analysis of an instability observed in a developmental aeroengine and the design of a single-nozzle test rig to replicate that phenomenon. This was successfully completed in 2001 and is documented in the Phase I report. This second phase was directed toward demonstration of active control strategies to mitigate this instability and thereby demonstrate the viability of active control for aircraft engine combustors. This involved development of high-speed actuator technology, testing and analysis of how the actuation system was integrated with the combustion system, control algorithm development, and demonstration testing in the single-nozzle test rig. A 30 percent reduction in the amplitude of the high-frequency (570 Hz) instability was achieved using actuation systems and control algorithms developed within this effort. Even larger reductions were shown with a low-frequency (270 Hz) instability. This represents a unique achievement in the development and practical demonstration of active combustion control systems for gas turbine applications.

  4. Monet's painting under the microscope.

    PubMed

    Dredge, Paula; Wuhrer, Richard; Phillips, Matthew R

    2003-04-01

    An oil painting by Claude Monet, Port-Goulphar, Belle-Ile 1887 (collection of the Art Gallery of New South Wales), was examined to determine both the identity of the pigments used by the artist in this painting and his technique of mixing colors and laying paint on the canvas. The extremely complex construction of the painting was revealed by optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS), and X-ray mapping (XRM) analysis of cross sections of paint flakes excised from damaged regions of Port-Goulphar, Belle-Ile. Nine different pigments were found on the painting. Many of the identified colors were modern pigments that became available only late in the 19th century as a result of scientific advances in pigment chemistry. Although similar colors were available in a natural mineral form, they lacked the vivid color of their manufactured counterparts. The use of these new synthetic metallic oxide colors by Monet accounts for the brilliance of his paintings. In addition, a separation between successive paint layers was observed in some areas of paint chip cross sections, indicating that oil-based paint was applied to paint that had dried, and consequently, Port-Goulphar, Belle-Ile was painted over a long period of time. This observation is contrary to the general perception of Monet's technique of painting freely and quickly. PMID:12639239

  5. Monet's Painting under the Microscope

    NASA Astrophysics Data System (ADS)

    Dredge, Paula; Wuhrer, Richard; Phillips, Matthew R.

    2003-04-01

    An oil painting by Claude Monet, Port-Goulphar, Belle-Ile 1887 (collection of the Art Gallery of New South Wales), was examined to determine both the identity of the pigments used by the artist in this painting and his technique of mixing colors and laying paint on the canvas. The extremely complex construction of the painting was revealed by optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS), and X-ray mapping (XRM) analysis of cross sections of paint flakes excised from damaged regions of Port-Goulphar, Belle-Ile. Nine different pigments were found on the painting. Many of the identified colors were modern pigments that became available only late in the 19th century as a result of scientific advances in pigment chemistry. Although similar colors were available in a natural mineral form, they lacked the vivid color of their manufactured counterparts. The use of these new synthetic metallic oxide colors by Monet accounts for the brilliance of his paintings. In addition, a separation between successive paint layers was observed in some areas of paint chip cross sections, indicating that oil-based paint was applied to paint that had dried, and consequently, Port-Goulphar, Belle-Ile was painted over a long period of time. This observation is contrary to the general perception of Monet's technique of painting freely and quickly.

  6. Active Flow Control Activities at NASA Langley

    NASA Technical Reports Server (NTRS)

    Anders, Scott G.; Sellers, William L., III; Washburn, Anthony E.

    2004-01-01

    NASA Langley continues to aggressively investigate the potential advantages of active flow control over more traditional aerodynamic techniques. This paper provides an update to a previous paper and describes both the progress in the various research areas and the significant changes in the NASA research programs. The goals of the topics presented are focused on advancing the state of knowledge and understanding of controllable fundamental mechanisms in fluids as well as to address engineering challenges. An organizational view of current research activities at NASA Langley in active flow control as supported by several projects is presented. On-center research as well as NASA Langley funded contracts and grants are discussed at a relatively high level. The products of this research are to be demonstrated either in bench-top experiments, wind-tunnel investigations, or in flight as part of the fundamental NASA R&D program and then transferred to more applied research programs within NASA, DOD, and U.S. industry.

  7. Fractional active disturbance rejection control.

    PubMed

    Li, Dazi; Ding, Pan; Gao, Zhiqiang

    2016-05-01

    A fractional active disturbance rejection control (FADRC) scheme is proposed to improve the performance of commensurate linear fractional order systems (FOS) and the robust analysis shows that the controller is also applicable to incommensurate linear FOS control. In FADRC, the traditional extended states observer (ESO) is generalized to a fractional order extended states observer (FESO) by using the fractional calculus, and the tracking differentiator plus nonlinear state error feedback are replaced by a fractional proportional-derivative controller. To simplify controller tuning, the linear bandwidth-parameterization method has been adopted. The impacts of the observer bandwidth ωo and controller bandwidth ωc on system performance are then analyzed. Finally, the FADRC stability and frequency-domain characteristics for linear single-input single-output FOS are analyzed. Simulation results by FADRC and ADRC on typical FOS are compared to demonstrate the superiority and effectiveness of the proposed scheme. PMID:26928516

  8. 40 CFR 745.65 - Lead-based paint hazards.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint... by EPA at 40 CFR part 745, subpart L and in regulations issued by the Department of Housing and Urban Development (HUD) at 24 CFR part 35, subpart R. The work practice standards in those regulations do not...

  9. 40 CFR 745.65 - Lead-based paint hazards.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint... by EPA at 40 CFR part 745, subpart L and in regulations issued by the Department of Housing and Urban Development (HUD) at 24 CFR part 35, subpart R. The work practice standards in those regulations do not...

  10. 40 CFR 745.65 - Lead-based paint hazards.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint... by EPA at 40 CFR part 745, subpart L and in regulations issued by the Department of Housing and Urban Development (HUD) at 24 CFR part 35, subpart R. The work practice standards in those regulations do not...

  11. Paint removal using lasers

    NASA Astrophysics Data System (ADS)

    Liu, Katherine; Garmire, Elsa

    1995-07-01

    Experiments to investigate the potential for practical laser graffiti-removal systems are reported. A universal engineering curve for the time needed for removal of paint from nonconductive substrates that was valid over a range of 107 in intensity was measured with a variety of lasers. Comparable times were measured for conductive substrates, when pulses shorter than the thermal conduction times were used. Analysis suggests that Q-switched Nd:YAG lasers may be the most efficient means for removing graffiti and other unwanted paint. An 1-m2 area of paint 14 mu m thick can be removed in approximately 10 min with a 50-Hz laser system of 15-W average power.

  12. Paint removal using lasers.

    PubMed

    Liu, K; Garmire, E

    1995-07-20

    Experiments to investigate the potential for practical laser graffiti-removal systems are reported. A universal engineering curve for the time needed for removal of paint from nonconductive substrates that was valid over a range of 10(7) in intensity was measured with a variety of lasers. Comparable times were measured for conductive substrates, when pulses shorter than the thermal conduction times were used. Analysis suggests that Q-switched Nd:YAG lasers may be the most efficient means for removing graffiti and other unwanted paint. An 1-m(2) area of paint 14 µm thick can be removed in approximately 10 min with a 50-Hz laser system of 15-W average power. PMID:21052275

  13. Oil-based paint poisoning

    MedlinePlus

    Hydrocarbons are the primary poisonous ingredient in oil paints. Some oil paints have heavy metals such as ... Gummin DD. Hydrocarbons. In: Nelson LS, Lewin NA, Howland MA, et al., eds. Goldfrank's Toxicologic Emergencies . 9th ed. New York, NY: ...

  14. Miniature spray-painting booth

    NASA Technical Reports Server (NTRS)

    Fee, K. W.

    1970-01-01

    Transparent spray booth provides method for quality painting and repair of surfaces in clean room or other specialized environments. Overspray and virtually all contaminating vapor and odor can be eliminated. Touch-up painting is achieved with spray gun.

  15. Process Waste Assessment - Paint Shop

    SciTech Connect

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is {open_quote}Paint Shop waste{close_quotes} -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so.

  16. Extended Active Disturbance Rejection Controller

    NASA Technical Reports Server (NTRS)

    Gao, Zhiqiang (Inventor); Tian, Gang (Inventor)

    2016-01-01

    Multiple designs, systems, methods and processes for controlling a system or plant using an extended active disturbance rejection control (ADRC) based controller are presented. The extended ADRC controller accepts sensor information from the plant. The sensor information is used in conjunction with an extended state observer in combination with a predictor that estimates and predicts the current state of the plant and a co-joined estimate of the system disturbances and system dynamics. The extended state observer estimates and predictions are used in conjunction with a control law that generates an input to the system based in part on the extended state observer estimates and predictions as well as a desired trajectory for the plant to follow.

  17. Extended Active Disturbance Rejection Controller

    NASA Technical Reports Server (NTRS)

    Gao, Zhiqiang (Inventor); Tian, Gang (Inventor)

    2014-01-01

    Multiple designs, systems, methods and processes for controlling a system or plant using an extended active disturbance rejection control (ADRC) based controller are presented. The extended ADRC controller accepts sensor information from the plant. The sensor information is used in conjunction with an extended state observer in combination with a predictor that estimates and predicts the current state of the plant and a co-joined estimate of the system disturbances and system dynamics. The extended state observer estimates and predictions are used in conjunction with a control law that generates an input to the system based in part on the extended state observer estimates and predictions as well as a desired trajectory for the plant to follow.

  18. Extended active disturbance rejection controller

    NASA Technical Reports Server (NTRS)

    Gao, Zhiqiang (Inventor); Tian, Gang (Inventor)

    2012-01-01

    Multiple designs, systems, methods and processes for controlling a system or plant using an extended active disturbance rejection control (ADRC) based controller are presented. The extended ADRC controller accepts sensor information from the plant. The sensor information is used in conjunction with an extended state observer in combination with a predictor that estimates and predicts the current state of the plant and a co-joined estimate of the system disturbances and system dynamics. The extended state observer estimates and predictions are used in conjunction with a control law that generates an input to the system based in part on the extended state observer estimates and predictions as well as a desired trajectory for the plant to follow.

  19. Static-Suppressing Optical Paint

    NASA Technical Reports Server (NTRS)

    Birnbaum, M. M.; Metzler, E. C.; Cleland, E. L.

    1985-01-01

    Electrically conductive flat black paint adheres well to magnesium, aluminum, fiberglass, and other materials. Paint absorbs stray light in optical instruments while preventing buildup of electrostatic fields and arcing. Paint consists of primer and topcoat, both containing electricallyconductive carbon-black powder. Primer two-part epoxy base, and topcoat polyurethane base.

  20. Tanjore: Mystical Painting of India

    ERIC Educational Resources Information Center

    Henn, Cynthia A.

    2004-01-01

    Tanjore (or Thanjavur or Thanlavoor) paintings are one of the most popular traditional art forms in Southern India. These ornate religious paintings involve Hindu mythology. The paintings are noted for their adornment of gold and semiprecious stones such as rubies, emeralds, and pearls. Currently, the semiprecious stones are often substituted…

  1. Dual control active superconductive devices

    DOEpatents

    Martens, Jon S.; Beyer, James B.; Nordman, James E.; Hohenwarter, Gert K. G.

    1993-07-20

    A superconducting active device has dual control inputs and is constructed such that the output of the device is effectively a linear mix of the two input signals. The device is formed of a film of superconducting material on a substrate and has two main conduction channels, each of which includes a weak link region. A first control line extends adjacent to the weak link region in the first channel and a second control line extends adjacent to the weak link region in the second channel. The current flowing from the first channel flows through an internal control line which is also adjacent to the weak link region of the second channel. The weak link regions comprise small links of superconductor, separated by voids, through which the current flows in each channel. Current passed through the control lines causes magnetic flux vortices which propagate across the weak link regions and control the resistance of these regions. The output of the device taken across the input to the main channels and the output of the second main channel and the internal control line will constitute essentially a linear mix of the two input signals imposed on the two control lines. The device is especially suited to microwave applications since it has very low input capacitance, and is well suited to being formed of high temperature superconducting materials since all of the structures may be formed coplanar with one another on a substrate.

  2. Improved thermal paint formulation

    NASA Technical Reports Server (NTRS)

    Gates, D. W.; Roger, F. O.; Zerlaut, G. A.

    1971-01-01

    Potassium silicate-treated zinc oxide paint stabilizes pigment against ultraviolet-induced, bleachable degradation in infrared region, and permits use of ZnO as pigment in ultraviolet-stable coatings based upon polymethyl siloxane elastomers and resins. Material has low absorptance/emittance ratio.

  3. Artists Paint ... Fantasy

    ERIC Educational Resources Information Center

    Herberholz, Barbara

    2012-01-01

    When he painted a portrait of Holy Roman Emperor Rudolph II (1552-1612), Giuseppe Arcimboldo used his imagination, and portrayed him as "Vertumnus," the Roman god of vegetation and the seasons. It's fun to find the different fruits, vegetables and flowers he used: pea-pod eyelids, a gourd for the forehead. Court painters of the time usually…

  4. Cultural Collage Paintings

    ERIC Educational Resources Information Center

    Coy, Mary

    2011-01-01

    In this article, the author describes a cultural collage painting project. Three things served as the impetus for this project: (1) a desire for students to explore the theme of "culture"; (2) an appreciation for the photo-montaged, layered images one sees in print media; and (3) noticing that projects from core subject areas hanging on the walls…

  5. Paint by Numbers Revived!

    ERIC Educational Resources Information Center

    Hahn, Nic

    2012-01-01

    Remember paint by numbers? This revived trend was a perfect solution to teaching geometric shapes to the author's first-grade students. Geometric shapes are identified and used in early elementary art classrooms, but this lesson gives students a deeper understanding of shape, encourages problem-solving, and makes a strong correlation between math…

  6. 24 CFR 965.215 - Lead-based paint liability insurance coverage.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Lead-based paint liability... Insurance Coverage § 965.215 Lead-based paint liability insurance coverage. (a) General. The purpose of this... with lead-based paint activities that the PHA undertakes, in accordance with the PHA's ACC with...

  7. 24 CFR 965.215 - Lead-based paint liability insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Lead-based paint liability... Insurance Coverage § 965.215 Lead-based paint liability insurance coverage. (a) General. The purpose of this... with lead-based paint activities that the PHA undertakes, in accordance with the PHA's ACC with...

  8. 24 CFR 965.215 - Lead-based paint liability insurance coverage.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Lead-based paint liability... Insurance Coverage § 965.215 Lead-based paint liability insurance coverage. (a) General. The purpose of this... with lead-based paint activities that the PHA undertakes, in accordance with the PHA's ACC with...

  9. 24 CFR 965.215 - Lead-based paint liability insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Lead-based paint liability... Insurance Coverage § 965.215 Lead-based paint liability insurance coverage. (a) General. The purpose of this... with lead-based paint activities that the PHA undertakes, in accordance with the PHA's ACC with...

  10. 24 CFR 965.215 - Lead-based paint liability insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Lead-based paint liability... Insurance Coverage § 965.215 Lead-based paint liability insurance coverage. (a) General. The purpose of this... with lead-based paint activities that the PHA undertakes, in accordance with the PHA's ACC with...

  11. Active Interior Noise Control Studies

    NASA Technical Reports Server (NTRS)

    Park, J.; Veeramani, S.; Sampath, A.; Balachandran, B.; Wereley, N.

    1996-01-01

    Analytical and experimental investigations into the control of noise in the interior of a three-dimensional enclosure with a flexible boundary are presented. The rigid boundaries are constructed from acrylic material, and in the different cases considered the flexible boundary is constructed from either aluminum or composite material. Noise generated by an external speaker is transmitted into the enclosure through the flexible boundary and active control is realized by using Lead Zirconate Titanate (PZT) piezoelectric actuators bonded to the flexible boundary. Condenser microphones are used for noise measurements inside and outside the enclosure. Minimization schemes for global and local noise control in the presence of a harmonic disturbance are developed and discussed. In the experiments, analog feedforward control is implemented by using the harmonic disturbance as a reference signal.

  12. Adaptive feedback active noise control

    NASA Astrophysics Data System (ADS)

    Kuo, Sen M.; Vijayan, Dipa

    Feedforward active noise control (ANC) systems use a reference sensor that senses a reference input to the controller. This signal is assumed to be unaffected by the secondary source and is a good measure of the undesired noise to be cancelled by the system. The reference sensor may be acoustic (e.g., microphone) or non-acoustic (e.g., tachometer, optical transducer). An obvious problem when using acoustic sensors is that the reference signal may be corrupted by the canceling signal generated by the secondary source. This problem is known as acoustic feedback. One way of avoiding this is by using a feedback active noise control (FANC) system which dispenses with the reference sensor. The FANC technique originally proposed by Olson and May employs a high gain negative feedback amplifier. This system suffered from the drawback that the error microphone had to be placed very close to the loudspeaker. The operation of the system was restricted to low frequency range and suffered from instability due to the possibility of positive feedback. Feedback systems employing adaptive filtering techniques for active noise control were developed. This paper presents the FANC system modeled as an adaptive prediction scheme.

  13. Toward a behavioral toxicology of paint thinner.

    PubMed

    Colotla, V A; Lorenzana-Jiménez, M; Rodríguez, R

    1980-01-01

    Few experiments have been carried out to evaluate the effects of toxic industrial substances such as the solvents on operant behavior. Laboratory rats trained in a mult FR DRL reinforcement schedule showed a differential impairment in performance when exposed to various doses of paint thinner in the experimental chamber, the FR performance being more sensitive to the solvent than DRL responding. Another study of rats working under a FI schedule suggested that the effects of paint thinner are rate-dependent, a finding which suggests a similarity of thinner with the amphetamines in regard to the behavioral effect. Two other experiments addressed to the behavioral effects of chronic exposure to the solvent showed a decrease in locomotor activity and an impaired acquisition of a complex temporal discrimination task in laboratory rats exposed to paint thinner during four, eight of sixteen weeks. These findings are suggestive of brain dysfunction associated with thinner inhalation but further experiments are needed for more definite conclusions. PMID:7442918

  14. PAINT SPRAY BOOTH MODIFICATIONS FOR RECIRCULATION VENTILATION

    EPA Science Inventory

    The control of emissions from spray painting operations has historically been cost prohibitive, due to the high exhaust flow rates coupled with low volatile organic compound (VOC) and hazardous air pollutant (HAP) Concentrations. Past studies, conducted by the U.S. EPA and U.S. ...

  15. Novel Active Combustion Control Valve

    NASA Technical Reports Server (NTRS)

    Caspermeyer, Matt

    2014-01-01

    This project presents an innovative solution for active combustion control. Relative to the state of the art, this concept provides frequency modulation (greater than 1,000 Hz) in combination with high-amplitude modulation (in excess of 30 percent flow) and can be adapted to a large range of fuel injector sizes. Existing valves often have low flow modulation strength. To achieve higher flow modulation requires excessively large valves or too much electrical power to be practical. This active combustion control valve (ACCV) has high-frequency and -amplitude modulation, consumes low electrical power, is closely coupled with the fuel injector for modulation strength, and is practical in size and weight. By mitigating combustion instabilities at higher frequencies than have been previously achieved (approximately 1,000 Hz), this new technology enables gas turbines to run at operating points that produce lower emissions and higher performance.

  16. Artists Paint ... Fall: Grades K-1

    ERIC Educational Resources Information Center

    Herberholz, Barbara

    2012-01-01

    Artists often paint the different seasonal activities people engage in and the way the world looks as changes take place. The weather for each of the four seasons is different. Farmers plant crops and gardens in the spring and harvest their crops in the fall, just like "The Harvesters" by Pieter Bruegel the Elder. To begin, children will observe…

  17. 77 FR 16796 - Lead Requirements for Lead-Based Paint Activities in Target Housing and Child-Occupied Facilities...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-22

    ... listings at http://www.gpoaccess.gov/fr/ . 2. In person: The State submittal is also available for public... of submission, which was March 29, 1999. (See, 64 FR 27266, May 19, 1999). In 2011, the Arkansas... activities program. On August 29, 1996 (61 FR 45777) (FRL-5389-9), EPA promulgated final TSCA section...

  18. Fragmentation of drying paint layers

    NASA Astrophysics Data System (ADS)

    Bakos, Katinka; Dombi, András; Járai-Szabó, Ferenc; Néda, Zoltán

    2013-11-01

    Fragmentation of thin layers of drying granular materials on a frictional surface are studied both by experiments and computer simulations. Besides a qualitative description of the fragmentation phenomenon, the dependence of the average fragment size as a function of the layer thickness is thoroughly investigated. Experiments are done using a special nail polish, which forms characteristic crack structures during drying. In order to control the layer thickness, we diluted the nail polish in acetone and evaporated in a controlled manner different volumes of this solution on glass surfaces. During the evaporation process we managed to get an instable paint layer, which formed cracks as it dried out. In order to understand the obtained structures a previously developed spring-block model was implemented in a three-dimensional version. The experimental and simulation results proved to be in excellent qualitative and quantitative agreement. An earlier suggested scaling relation between the average fragment size and the layer thickness is reconfirmed.

  19. Reducer Selection When Doing Overall Paint Jobs Using Enamel Paints. Lesson Plan No. 1 of Auto Repair and Painting.

    ERIC Educational Resources Information Center

    Tyau, Layton M.

    This lesson, which is part of a high school course in auto body repair and painting, deals with selecting a reducer when doing overall paint jobs using enamel paints. Students are taught the general properties of different types of enamel paints and selection of the proper reducer for each type of paint, depending on the weather and the specific…

  20. Neuronal activity controls transsynaptic geometry.

    PubMed

    Glebov, Oleg O; Cox, Susan; Humphreys, Lawrence; Burrone, Juan

    2016-01-01

    The neuronal synapse is comprised of several distinct zones, including presynaptic vesicle zone (SVZ), active zone (AZ) and postsynaptic density (PSD). While correct relative positioning of these zones is believed to be essential for synaptic function, the mechanisms controlling their mutual localization remain unexplored. Here, we employ high-throughput quantitative confocal imaging, super-resolution and electron microscopy to visualize organization of synaptic subdomains in hippocampal neurons. Silencing of neuronal activity leads to reversible reorganization of the synaptic geometry, resulting in a increased overlap between immunostained AZ and PSD markers; in contrast, the SVZ-AZ spatial coupling is decreased. Bayesian blinking and bleaching (3B) reconstruction reveals that the distance between the AZ-PSD distance is decreased by 30 nm, while electron microscopy shows that the width of the synaptic cleft is decreased by 1.1 nm. Our findings show that multiple aspects of synaptic geometry are dynamically controlled by neuronal activity and suggest mutual repositioning of synaptic components as a potential novel mechanism contributing to the homeostatic forms of synaptic plasticity. PMID:26951792

  1. Neuronal activity controls transsynaptic geometry

    PubMed Central

    Glebov, Oleg O.; Cox, Susan; Humphreys, Lawrence; Burrone, Juan

    2016-01-01

    The neuronal synapse is comprised of several distinct zones, including presynaptic vesicle zone (SVZ), active zone (AZ) and postsynaptic density (PSD). While correct relative positioning of these zones is believed to be essential for synaptic function, the mechanisms controlling their mutual localization remain unexplored. Here, we employ high-throughput quantitative confocal imaging, super-resolution and electron microscopy to visualize organization of synaptic subdomains in hippocampal neurons. Silencing of neuronal activity leads to reversible reorganization of the synaptic geometry, resulting in a increased overlap between immunostained AZ and PSD markers; in contrast, the SVZ-AZ spatial coupling is decreased. Bayesian blinking and bleaching (3B) reconstruction reveals that the distance between the AZ-PSD distance is decreased by 30 nm, while electron microscopy shows that the width of the synaptic cleft is decreased by 1.1 nm. Our findings show that multiple aspects of synaptic geometry are dynamically controlled by neuronal activity and suggest mutual repositioning of synaptic components as a potential novel mechanism contributing to the homeostatic forms of synaptic plasticity. PMID:26951792

  2. POLLUTION PREVENTION DEMONSTRATION AND EVALUATION OF PAINT APPLICATION EQUIPMENT AND ALTERNATIVES TO METHYLENE CHLORIDE AND METHYL ETHYL KETONE

    EPA Science Inventory

    The report gives results of demonstrations of technologies to prevent or control emissions of hazardous air pollutant (HAPs) and volatile organic compounds (VOCs) from processes with high solvent usage: (1) paint stripping using methylene chloride, (2) cleaning paint equipment wi...

  3. Is painting by elephants in zoos as enriching as we are led to believe?

    PubMed Central

    Kaplan, Gisela; Rogers, Lesley J.

    2014-01-01

    The relationship between the activity of painting and performance of stereotyped and other stress-related behaviour was investigated in four captive Asian elephants at Melbourne Zoo, Australia. The activity involved the elephant being instructed to paint on a canvas by its keeper in front of an audience. Painting by elephants in zoos is commonly believed to be a form of enrichment, but this assumption had not been based on any systematic research. If an activity is enriching we would expect stress-related behaviour to be reduced but we found no evidence of the elephants anticipating the painting activity and no effect on the performance of stereotyped or other stress-related behaviour either before or after the painting session. This indicates that the activity does not fulfil one of the main aims of enrichment. However, if an elephant was not selected to paint on a given day this was associated with higher levels of non-interactive behaviour, a possible indicator of stress. Behavioural observations associated with ear, eye and trunk positions during the painting session showed that the elephant’s attentiveness to the painting activity or to the keeper giving instruction varied between individuals. Apart from positive reinforcement from the keeper, the results indicated that elephants gain little enrichment from the activity of painting. Hence, the benefits of this activity appear to be limited to the aesthetic appeal of these paintings to the people viewing them. PMID:25071994

  4. 46 CFR 72.05-45 - Paint.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Paint. 72.05-45 Section 72.05-45 Shipping COAST GUARD... Protection § 72.05-45 Paint. (a) An excessive number of coats of paint will be discouraged unless noncombustible paint is used. (b) Nitrocellulose or other highly flammable or noxious fume-producing paints...

  5. 46 CFR 72.05-45 - Paint.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Paint. 72.05-45 Section 72.05-45 Shipping COAST GUARD... Protection § 72.05-45 Paint. (a) An excessive number of coats of paint will be discouraged unless noncombustible paint is used. (b) Nitrocellulose or other highly flammable or noxious fume-producing paints...

  6. 46 CFR 72.05-45 - Paint.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Paint. 72.05-45 Section 72.05-45 Shipping COAST GUARD... Protection § 72.05-45 Paint. (a) An excessive number of coats of paint will be discouraged unless noncombustible paint is used. (b) Nitrocellulose or other highly flammable or noxious fume-producing paints...

  7. 46 CFR 72.05-45 - Paint.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Paint. 72.05-45 Section 72.05-45 Shipping COAST GUARD... Protection § 72.05-45 Paint. (a) An excessive number of coats of paint will be discouraged unless noncombustible paint is used. (b) Nitrocellulose or other highly flammable or noxious fume-producing paints...

  8. 46 CFR 72.05-45 - Paint.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Paint. 72.05-45 Section 72.05-45 Shipping COAST GUARD... Protection § 72.05-45 Paint. (a) An excessive number of coats of paint will be discouraged unless noncombustible paint is used. (b) Nitrocellulose or other highly flammable or noxious fume-producing paints...

  9. Terahertz paintmeter for noncontact monitoring of thickness and drying progress in paint film

    NASA Astrophysics Data System (ADS)

    Yasui, Takeshi; Yasuda, Takashi; Sawanaka, Ken-Ichi; Araki, Tsutomu

    2005-11-01

    We propose a paintmeter for noncontact and remote monitoring of the thickness and drying progress of a paint film based on the time-of-flight measurement of the echo signal of a terahertz (THz) electromagnetic pulse. The proposed method is effectively applied to two-dimensional mapping of the painting thickness distribution for single-layer and multilayer paint films. Furthermore, adequate parameters for the drying progress are extracted from the THz pulse-echo signal and effectively applied to monitor the wet-to-dry transformation. The THz paintmeter can be a powerful tool for quality control of the paint film on the in-process monitoring of car body painting.

  10. 'Weightless' acrylic painting by Jack Kroehnke

    NASA Technical Reports Server (NTRS)

    1987-01-01

    'Weightless' acrylic painting by Jack Kroehnke depicts STS-26 Discovery, Orbiter Vehicle (OV) 103, Mission Specialist (MS) David C. Hilmers participating in extravehicular activity (EVA) simulation in JSC Weightless Environment Training Facility (WETF) Bldg 29. In the payload bay (PLB) mockup, Hilmers, wearing extravehicular mobility unit (EMU), holds onto the mission-peculiar equipment support structure in foreground while SCUBA-equipped diver monitors activity overhead and camera operator records EVA procedures. Copyrighted art work for use by NASA.

  11. Structure, Antimicrobial Activities and Mode of Interaction with Membranes of Bovel Phylloseptins from the Painted-Belly Leaf Frog, Phyllomedusa sauvagii

    PubMed Central

    Raja, Zahid; André, Sonia; Piesse, Christophe; Sereno, Denis; Nicolas, Pierre; Foulon, Thierry

    2013-01-01

    Transcriptomic and peptidomic analysis of skin secretions from the Painted-belly leaf frog Phyllomedusa sauvagii led to the identification of 5 novel phylloseptins (PLS-S2 to -S6) and also of phylloseptin-1 (PSN-1, here renamed PLS-S1), the only member of this family previously isolated in this frog. Synthesis and characterization of these phylloseptins revealed differences in their antimicrobial activities. PLS-S1, -S2, and -S4 (79–95% amino acid sequence identity; net charge  = +2) were highly potent and cidal against Gram-positive bacteria, including multidrug resistant S. aureus strains, and killed the promastigote stage of Leishmania infantum, L. braziliensis and L. major. By contrast, PLS-S3 (95% amino acid identity with PLS-S2; net charge  = +1) and -S5 (net charge  = +2) were found to be almost inactive against bacteria and protozoa. PLS-S6 was not studied as this peptide was closely related to PLS-S1. Differential scanning calorimetry on anionic and zwitterionic multilamellar vesicles combined with circular dichroism spectroscopy and membrane permeabilization assays on bacterial cells indicated that PLS-S1, -S2, and -S4 are structured in an amphipathic α-helix that disrupts the acyl chain packing of anionic lipid bilayers. As a result, regions of two coexisting phases could be formed, one phase rich in peptide and the other lipid-rich. After reaching a threshold peptide concentration, the disruption of lipid packing within the bilayer may lead to local cracks and disintegration of the microbial membrane. Differences in the net charge, α-helical folding propensity, and/or degree of amphipathicity between PLS-S1, -S2 and -S4, and between PLS-S3 and -S5 appear to be responsible for their marked differences in their antimicrobial activities. In addition to the detailed characterization of novel phylloseptins from P. sauvagii, our study provides additional data on the previously isolated PLS-S1 and on the mechanism of action of phylloseptins

  12. Structure, antimicrobial activities and mode of interaction with membranes of novel [corrected] phylloseptins from the painted-belly leaf frog, Phyllomedusa sauvagii.

    PubMed

    Raja, Zahid; André, Sonia; Piesse, Christophe; Sereno, Denis; Nicolas, Pierre; Foulon, Thierry; Oury, Bruno; Ladram, Ali

    2013-01-01

    Transcriptomic and peptidomic analysis of skin secretions from the Painted-belly leaf frog Phyllomedusa sauvagii led to the identification of 5 novel phylloseptins (PLS-S2 to -S6) and also of phylloseptin-1 (PSN-1, here renamed PLS-S1), the only member of this family previously isolated in this frog. Synthesis and characterization of these phylloseptins revealed differences in their antimicrobial activities. PLS-S1, -S2, and -S4 (79-95% amino acid sequence identity; net charge  = +2) were highly potent and cidal against Gram-positive bacteria, including multidrug resistant S. aureus strains, and killed the promastigote stage of Leishmania infantum, L. braziliensis and L. major. By contrast, PLS-S3 (95% amino acid identity with PLS-S2; net charge  = +1) and -S5 (net charge  = +2) were found to be almost inactive against bacteria and protozoa. PLS-S6 was not studied as this peptide was closely related to PLS-S1. Differential scanning calorimetry on anionic and zwitterionic multilamellar vesicles combined with circular dichroism spectroscopy and membrane permeabilization assays on bacterial cells indicated that PLS-S1, -S2, and -S4 are structured in an amphipathic α-helix that disrupts the acyl chain packing of anionic lipid bilayers. As a result, regions of two coexisting phases could be formed, one phase rich in peptide and the other lipid-rich. After reaching a threshold peptide concentration, the disruption of lipid packing within the bilayer may lead to local cracks and disintegration of the microbial membrane. Differences in the net charge, α-helical folding propensity, and/or degree of amphipathicity between PLS-S1, -S2 and -S4, and between PLS-S3 and -S5 appear to be responsible for their marked differences in their antimicrobial activities. In addition to the detailed characterization of novel phylloseptins from P. sauvagii, our study provides additional data on the previously isolated PLS-S1 and on the mechanism of action of phylloseptins. PMID

  13. Active control technology and the use of multiple control surfaces

    NASA Technical Reports Server (NTRS)

    Hart, J. E.

    1976-01-01

    Needed criteria for active control technology applications in commercial transports are lacking. Criteria for redundancy requirements, believed to be consistent with certification philosophy, are postulated to afford a discussion of the relative value of multiple control surfaces. The control power and frequency bandpass requirements of various active control technology applications are shown to be such that multiple control surfaces offer advantages in minimizing the hydraulic or auxiliary power for the control surface actuators.

  14. Active Spacecraft Potential Control Investigation

    NASA Astrophysics Data System (ADS)

    Torkar, K.; Nakamura, R.; Tajmar, M.; Scharlemann, C.; Jeszenszky, H.; Laky, G.; Fremuth, G.; Escoubet, C. P.; Svenes, K.

    2016-03-01

    In tenuous plasma the floating potential of sunlit spacecraft reaches tens of volts, positive. The corresponding field disturbs measurements of the ambient plasma by electron and ion sensors and can reduce micro-channel plate lifetime in electron detectors owing to large fluxes of attracted photoelectrons. Also the accuracy of electric field measurements may suffer from a high spacecraft potential. The Active Spacecraft Potential Control (ASPOC) neutralizes the spacecraft potential by releasing positive charge produced by indium ion emitters. The method has been successfully applied on other spacecraft such as Cluster and Double Star. Two ASPOC units are present on each spacecraft. Each unit contains four ion emitters, whereby one emitter per instrument is operated at a time. ASPOC for the Magnetospheric Multiscale (MMS) mission includes new developments in the design of the emitters and the electronics. New features include the use of capillaries instead of needles, new materials for the emitters and their internal thermal insulators, an extended voltage and current range of the electronics, both for ion emission and heating purposes, and a more capable control software. This enables lower spacecraft potentials, higher reliability, and a more uniform potential structure in the spacecraft's sheath compared to previous missions. Results from on-ground testing demonstrate compliance with requirements. Model calculations confirm the findings from previous applications that the plasma measurements will not be affected by the beam's space charge. Finally, the various operating modes to adapt to changing boundary conditions are described along with the main data products.

  15. Reassessing the extent of the Q classification for containment paint

    SciTech Connect

    Spires, G.

    1995-12-31

    A mounting number of site-specific paint debris transport and screen clogging analyses submitted to justify substandard containment paint work have been deemed persuasive by virtue of favorable U.S. Nuclear Regulatory Commission safety evaluation report (SER) findings. These lay a strong foundation for a standardized approach to redefining the extent to which paint in containment needs to be considered {open_quotes}Q.{close_quotes} This information justifies an initiative by licensees to roll back paint work quality commitments made at the design phase. This paper questions the validity of the basic premise that all primary containment paint can significantly compromise core and containment cooling [emergency core cooling system/engineered safeguard feature (ECCS/ESF)]. It is posited that the physical extent of painted containment surfaces for which extant material qualification and quality control (QC) structures need apply can be limited to zones relatively proximate to ECCS/ESF suction points. For other painted containment surfaces, simplified criteria should be allowed.

  16. Delving Deeper: Painting the Pyramid

    ERIC Educational Resources Information Center

    Kribs-Zaleta, Christopher M.

    2006-01-01

    Painting the Cube is commonly used in middle and high school mathematical courses as a mathematically rich problem, wherein the exposed faces of the large cubes are painted after being assembled from small unit cubes. The problem perfectly combines algebraic as well as geometrical aspects and helps students to study and understand various linear,…

  17. Laser assisted graffiti paints removing

    NASA Astrophysics Data System (ADS)

    Novikov, B. Y.; Chikalev, Y. V.; Shakhno, E. A.

    2010-07-01

    It's hard to imagine a modern city view without some drawings and inscriptions, usually called "graffiti". Traditional cleaning methods do not suit modern requirements. Investigation of possibilities of laser assisted paints removing is described in this article. The conditions for removing different paints from different surfaces were defined.

  18. Laser assisted graffiti paints removing

    NASA Astrophysics Data System (ADS)

    Novikov, B. Y.; Chikalev, Y. V.; Shakhno, E. A.

    2011-02-01

    It's hard to imagine a modern city view without some drawings and inscriptions, usually called "graffiti". Traditional cleaning methods do not suit modern requirements. Investigation of possibilities of laser assisted paints removing is described in this article. The conditions for removing different paints from different surfaces were defined.

  19. Additive Transforms Paint into Insulation

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

  20. Microscale radiocarbon dating of paintings

    NASA Astrophysics Data System (ADS)

    Hendriks, Laura; Hajdas, Irka; McIntyre, Cameron; Küffner, Markus; Scherrer, Nadim C.; Ferreira, Ester S. B.

    2016-03-01

    In this paper, radiocarbon dating of paintings using minimal sample sizes has been investigated, in an effort to address the problem of limited access to sample material in paintings. 14C analyses were conducted on signed and dated paintings from two Swiss artists of the twentieth century. The selected paintings dated from the 1930s and 1960s, provided the opportunity to evaluate the dating accuracy on paintings realized before and after 1950 AD when the 14C bomb peak was created, as a result of the nuclear tests conducted in the 1950/1960s. The work focused on the one hand on minimizing the size of the canvas sample required for accelerator mass spectrometer radiocarbon measurement on the gas ion source of the MICADAS and, on the other hand, on testing the possibility of dating the organic binder of the paint. Following careful characterization of the paint composition by X-ray fluorescence spectroscopy, Fourier transformed infrared spectroscopy, and Raman spectroscopy, paints containing no other carbon source than the natural organic binder were identified and dated.

  1. Death by paint thinner.

    PubMed

    Collison, Ines; Moorehead, Wayne

    2002-10-01

    A 38-year-old Caucasian male, reportedly missing for four days, was found dead 40 feet down a steep ravine, apparently after jumping down the cliff. Two rectangular cans of paint thinner, 1-qt and 1-gal sizes, were found in his vehicle at the top of the cliff. The autopsy report indicated that the decedent was normal except for the heart and myocardium, the lung parenchyma, and the gastric and esophageal mucosa. The stomach contents revealed a brownish liquid with a nearly clear, thick, oily film, and the small and large bowels showed oily liquid with a strong odor of a petroleum distillate. Toxicological analysis was negative for ethanol and common drugs of abuse. Valproic acid, diphenhydramine, and norsertraline where found in therapeutic concentrations, and sertraline, diazepam, and nordiazepam were found in subtherapeutic levels. Bupropion metabolites were also detected. Static adsorption-elution, commonly used in fire debris analysis, was used to examine the brain, liver, lung, blood, and urine. A liquid-liquid extraction was performed on the vitreous humor. The stomach contents and samples from the paint thinner cans were diluted with carbon disulfide. All but the blood and vitreous contained a medium petroleum distillate. The stomach content was consistent with the liquid from the one-gallon can. Chromatograms suggest differential metabolism and/or distribution among the different organs. PMID:12423013

  2. Photodynamic inactivation of biofilm building microorganisms by photoactive facade paints.

    PubMed

    Preuß, Annegret; Bornhütter, Tobias; Färber, Alexander; Schaller, Christian; Röder, Beate

    2016-07-01

    This study was performed as a proof of concept for singlet oxygen generating facade paint as an alternative to conventional biocide containing facade paint for the prevention of biofilm growth on outdoor walls. Biofilms on outdoor walls cause esthetic problems and economic damage. Therefore facade paints often contain biocides. However commercially available biocides may have a series of adverse effects on living organisms as well as harmful environmental effects. Furthermore, biocides are increasingly designed to be more effective and are environmentally persistent. Thus, an eco-friendly and non-harmful to human health alternative to conventional biocides in wall color is strongly recommended. The well-known photosensitizer 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-21H,23H-porphine (TMPyP) was used as an additive in a commercially available facade paint. The generation of singlet molecular oxygen was shown using time resolved 2D measurements of the singlet oxygen luminescence. The photodynamic activity of the photosensitizer in the facade paint was demonstrated by phototoxicity tests with defined mold fungi and a mixture of microorganisms harvested from native outdoor biofilms as model organisms. It was proven in general that it is possible to inhibit the growth of biofilm forming microorganisms growing on solid wall paint surfaces by the cationic photosensitizer TMPyP added to the facade paint using daylight conditions for illumination in 12h light and dark cycles. PMID:27101275

  3. Active thermal control system evolution

    NASA Technical Reports Server (NTRS)

    Petete, Patricia A.; Ames, Brian E.

    1991-01-01

    The 'restructured' baseline of the Space Station Freedom (SSF) has eliminated many of the growth options for the Active Thermal Control System (ATCS). Modular addition of baseline technology to increase heat rejection will be extremely difficult. The system design and the available real estate no longer accommodate this type of growth. As the station matures during its thirty years of operation, a demand of up to 165 kW of heat rejection can be expected. The baseline configuration will be able to provide 82.5 kW at Eight Manned Crew Capability (EMCC). The growth paths necessary to reach 165 kW have been identified. Doubling the heat rejection capability of SSF will require either the modification of existing radiator wings or the attachment of growth structure to the baseline truss for growth radiator wing placement. Radiator performance can be improved by enlarging the surface area or by boosting the operating temperature with a heat pump. The optimal solution will require both modifications. The addition of growth structure would permit the addition of a parallel ATCS using baseline technology. This growth system would simplify integration. The feasibility of incorporating these growth options to improve the heat rejection capacity of SSF is under evaluation.

  4. Active control of combustion instability

    SciTech Connect

    Lang, W.; Poinsot, T.; Candel, S.

    1987-12-01

    The principle of 'antisound' is used to construct a method for the suppression of combustion instabilities. This active instability control (AIC) method uses external acoustic excitation by a loudspeaker to suppress the oscillations of a flame. The excitation signal is provided by a microphone located upstream of the flame. This signal is filtered, processed, amplified, and sent to the loudspeaker. The AIC method is validated on a laboratory combustor. It allows the suppression of all unstable modes of the burner for any operating ratio. The influence of the microphone and loudspeaker locations on the performance of the AIC system is described. For a given configuration, domains of stability, i.e., domains where the AIC system parameters provide suppression of the oscillation, are investigated. Measurements of the electric input of the loudspeaker show that the energy consumption of the AIC system is almost negligible and suggest that this method could be used for industrial combustor stabilization. Finally, a simple model describing the effects of the AIC system is developed and its results compared to the experiment.

  5. Status and trends in active control technology

    NASA Technical Reports Server (NTRS)

    Rediess, H. A.; Szalai, K. J.

    1975-01-01

    The emergence of highly reliable fly-by-wire flight control systems makes it possible to consider a strong reliance on automatic control systems in the design optimization of future aircraft. This design philosophy has been referred to as the control configured vehicle approach or the application of active control technology. Several studies and flight tests sponsored by the Air Force and NASA have demonstrated the potential benefits of control configured vehicles and active control technology. The present status and trends of active control technology are reviewed and the impact it will have on aircraft designs, design techniques, and the designer is predicted.

  6. Is nanotechnology revolutionizing the paint and lacquer industry? A critical opinion.

    PubMed

    Kaiser, Jean-Pierre; Zuin, Stefano; Wick, Peter

    2013-01-01

    Many paints for indoor and outdoor applications contain biocides and additives for protection against microbial, physical and chemical deterioration. The biocides should remain active as long as they are incorporated in the paint. Protection against microbial colonization should last at least a decade. Once the biocides are released they should degrade within a short time so that no accumulation in the environment can occur. The paint industry is not only focusing their research in producing better paint formulations with degradable biocides: they also consider using nanomaterials, such as nanosilver, nanocopper, nanozinc oxide, photocatalytic-active nanotitanium dioxide and nanosilica dioxide as additives for the protection of paints, against microbial degradation and physical and chemical deterioration. In the future nanomaterials should replace biodegradable biocides and improve the paint properties as well as impede colonization by microorganisms. At the time there is no guarantee that the nanomaterials in paints and façades will fulfill their task in the long run, since there are no long term studies available. From nanosilver doped paints it is known that silver is easily washed out by rain. Photocatalytic active nanotitanium dioxide adsorbs ultra violet light (UV-light) and generates hydroxyl radicals, which not only inhibit microbial growth but can also initiate or accelerate the photocatalytic degradation of the paint matrix. Thus at this time it is still unknown if it makes sense to incorporate nanomaterials into paints. Intensive research and development are still needed in order to find the answers. PMID:23178832

  7. The Magic of the Brush and the Power of Color: Integrating Theory into Practice of Painting in Early Childhood Settings

    ERIC Educational Resources Information Center

    Lim, Boo Yeun

    2004-01-01

    Painting in early childhood classrooms should have its own values and purposes enriching young children's aesthetic intelligence rather than being considered as mere supplements to other art activities. The three approaches to painting in early childhood settings--Bank Street, Reggio, and Waldorf--consider painting as the core of integrated…

  8. Enrichment options for African painted dogs (Lycaon pictus).

    PubMed

    Cloutier, Tammy L; Packard, Jane M

    2014-01-01

    Best practices for carnivore enrichment encourage the diversity of species-typical behaviors, increased activity, and reduced stereotypic behavior; ideally considering the life-history and behavior of each species. African wild dogs (Lycaon pictus), or painted dogs, are social carnivores that have large home ranges and complex pack dynamics (e.g., variation in group size, relatedness, etc.). As there are relatively few studies on painted dog enrichment, the goal of this study was to compile a list of enrichment options used by institutions participating in the species survival plan (SSP). Representatives were asked to describe social groups (n = 45), enclosures (n = 21), enrichment practices (options, delivery frequency, perceived success), and overall best practices. Respondents (61%, n = 23) reported using options for all six enrichment categories recommended by the Canid Taxon Advisory Group: environmental enrichment devices, habitat, sensory, food, behavioral, and social. Perceived success was significantly higher for the food category, followed by the sensory and behavioral categories. All respondents reported delivering enrichment at least multiple times a month, and most reported multiple times per week. Enclosure size did not differ significantly for mixed-sex groups (n = 28) compared to single-sex groups (n = 17). We discuss respondents' suggestions for best practices and the need to record data to compare perceived success with actual behavioral effects, controlling for variation in group size and composition. Overall, respondents recommended a flexible approach, since not all painted dogs and groups respond in the same way to the enrichment options. PMID:25138282

  9. Overview of Langley activities in active controls research

    NASA Technical Reports Server (NTRS)

    Abel, I.; Newsom, J. R.

    1981-01-01

    The application of active controls technology to reduce aeroelastic response of aircraft structures offers a potential for significant payoffs in terms of aerodynamic efficiency and weight savings. The activities of the Langley Research Center (laRC) in advancing active controls technology. Activities are categorized into the development of appropriate analysis tools, control law synthesis methodology, and experimental investigations aimed at verifying both analysis and synthesis methodology.

  10. Waveguide BEC Interferometry with Painted Potentials

    NASA Astrophysics Data System (ADS)

    Boshier, Malcolm; Lebedev, Vyacheslav; Samson, Carlo; Ryu, Changhyun

    2015-05-01

    Waveguide atom interferometers offer the possibility of long measurement times in a compact geometry, which can be an advantage over free space interferometers if the dephasing due to interatomic interactions can be controlled. We are investigating waveguide BEC interferometers created with the painted potential, a technique which allows for the creation and manipulation of BECs in arbitrary 2D potentials. The goal is to measure a linear acceleration of the device. The painted potential allows new approaches to the initial splitting of the BEC. For example, instead of smoothly deforming a single well potential into a double well, it is possible instead to gradually remove a weak link coupling two initially separated waveguides. This strategy should reduce excitations created in the splitting process. We are currently implementing such schemes and measuring the coherence time of the BEC after division. We will present the results of these measurements, and report progress towards measuring linear accelerations. Supported by LANL/LDRD.

  11. MIT Middeck Active Control Experiment (MACE): noncollocated payload pointing control

    NASA Astrophysics Data System (ADS)

    MacMartin, Douglas G.; Miller, David W.

    1993-09-01

    The Middeck Active Control Experiment is a space shuttle flight experiment intended to demonstrate high authority active structural control in zero gravity conditions. The prediction of on-orbit closed-loop dynamics is based on analysis and ground testing. The MACE test article is representative of multiple payload platforms, and includes two 2-axis gimballing payloads connected by a flexible bus. The goal of active control is to maintain pointing accuracy of one payload, while the remaining payload is moving independently. Current control results on the ground test article are presented. Multiple input, multiple output controllers are designed based on high order measurement based models. Linear Quadratic Gaussian controllers yield reasonable performance. At high authority, however, these controllers destabilize the actual structure, due to parametric errors in the control design model. A robust control design procedure is required to yield high performance in the presence of these errors.

  12. 7 CFR 3201.106 - Paint removers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Paint removers. 3201.106 Section 3201.106 Agriculture... Items § 3201.106 Paint removers. (a) Definition. Products formulated to loosen and remove paint from painted surfaces. (b) Minimum biobased content. The Federal preferred procurement product must have...

  13. Student feedback on the use of paintings in Sparshanam, the Medical Humanities module at KIST Medical College, Nepal

    PubMed Central

    2011-01-01

    Background Paintings have been used in Medical Humanities modules in Nepal at Manipal College of Medical Sciences and KIST Medical College. Detailed participant feedback about the paintings used, the activities carried out, problems with using paintings and the role of paintings in future modules has not been previously done. Hence the present study was carried out. Methods The present module for first year medical students was conducted from February to August 2010 at KIST Medical College, Nepal. Paintings used were by Western artists and obtained from the Literature, Arts and Medicine database. The activities undertaken by the students include answering the questions 'What do you see' and 'What do you feel' about the painting, creating a story of 100 words about the scene depicted, and interpreting the painting using role plays and poems/songs. Feedback was not obtained about the last two activities. In August 2010 we obtained detailed feedback about the paintings used. Results Seventy-eight of the 100 students (78%) participated. Thirty-four students (43.6%) were male. The most common overall comments about the use of paintings were "they helped me feel what I saw" (12 respondents), "enjoyed the sessions" (12 respondents), "some paintings were hard to interpret" (10 respondents) and "were in tune with module objectives" (10 respondents). Forty-eight (61.5%) felt the use of western paintings was appropriate. Suggestions to make annotations about paintings more useful were to make them shorter and more precise, simplify the language and properly introduce the artist. Forty-one students (52.6%) had difficulty with the exercise 'what do you feel'. Seventy-four students (94.9%) wanted paintings from Nepal to be included. Conclusions Participant response was positive and they were satisfied with use of paintings in the module. Use of more paintings from Nepal and South Asia can be considered. Further studies may be required to understand whether use of paintings

  14. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When..., paint-related material, adhesives, ink and resins must be packaged as follows: (1) As prescribed...

  15. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When..., paint-related material, adhesives, ink and resins must be packaged as follows: (1) As prescribed...

  16. Fluidized bed paint stripping and sludge burning

    SciTech Connect

    Bhatia, J.; Staffin, H.K.

    1986-01-01

    High volume automated painting, as encountered in the painting of automobiles and appliances, requires that the item being painted be positioned in a conveying frame or fixture so that the painting machine or robot achieves a reproducible, high quality paint job. These conveying frames or fixtures are extensive fabrications carefully designed to position and support the item being painted. In the case of automotive painting, they are rather large and involve substantial weights, because they must be capable of supporting and positioning auto bodies and large sub-assemblies.

  17. Influence of antifouling paint on freshwater invertebrates (Mytilidae, Chironomidae and Naididae): density, richness and composition.

    PubMed

    Fujita, D S; Takeda, A M; Coutinho, R; Fernandes, F C

    2015-11-01

    We conducted a study about invertebrates on artificial substrates with different antifouling paints in order to answer the following questions 1) is there lower accumulation of organic matter on substrates with antifouling paints, 2) is invertebrate colonization influenced by the release of biocides from antifouling paints, 3) is the colonization of aquatic invertebrates positively influenced by the material accumulated upon the substrate surface and 4) is the assemblage composition of invertebrates similar among the different antifouling paints? To answer these questions, four structures were installed in the Baía River in February 1st, 2007. Each structure was composed of 7 wood boards: 5 boards painted with each type of antifouling paints (T1, T2, T3, T4 and T5), one painted only with the primer (Pr) and the other without any paint (Cn). After 365 days, we observed a greater accumulation of organic matter in the substrates with T2 and T3 paint coatings. Limnoperna fortunei was recorded in all tested paints, with higher densities in the control, primer, T2 and T3. The colonization of Chironomidae and Naididae on the substrate was positively influenced by L. fortunei density. The non-metric multidimensional scaling (NMDS) of the invertebrate community provided evidence of the clear distinction of invertebrate assemblages among the paints. Paints T2 and T3 were the most similar to the control and primer. Our results suggest that antifouling paints applied on substrates hinder invertebrate colonization by decreasing the density and richness of invertebrates. PMID:26628222

  18. Orbiter active thermal control system description

    NASA Technical Reports Server (NTRS)

    Laubach, G. E.

    1975-01-01

    A brief description of the Orbiter Active Thermal Control System (ATCS) including (1) major functional requirements of heat load, temperature control and heat sink utilization, (2) the overall system arrangement, and (3) detailed description of the elements of the ATCS.

  19. Developing Internal Controls through Activities

    ERIC Educational Resources Information Center

    Barnes, F. Herbert

    2009-01-01

    Life events can include the Tuesday afternoon cooking class with the group worker or the Saturday afternoon football game, but in the sense that Fritz Redl thought of them, these activities are only threads in a fabric of living that includes all the elements of daily life: playing, working, school-based learning, learning through activities,…

  20. Studying Landforms through Landscape Painting.

    ERIC Educational Resources Information Center

    Glenn, William H.

    1981-01-01

    Using three specific works of art, the author demonstrates how a study of selected landscape paintings can be integrated into units on landforms in secondary school earth science and general science courses. (Author/SJL)

  1. Active Compliance And Damping In Telemanipulator Control

    NASA Technical Reports Server (NTRS)

    Kim, Won S.; Bejczy, Antal K.; Hannaford, Blake

    1991-01-01

    Experimental telemanipulator system of force-reflecting-hand-controller type provides for active compliance and damping in remote, robotic manipulator hand. Distributed-computing and -control system for research in various combinations of force-reflecting and active-compliance control regimes. Shared compliance control implemented by low-pass-filtered force/torque feedback. Variable simulated springs and shock absorbers soften collisions and increase dexterity.

  2. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.

    1992-01-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: program objectives; program features; flight experiment features; current activities; MACE development model lab testing; MACE test article deployed on STS middeck; and development model testing.

  3. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: program objectives; program features; flight experiment features; current activities; MACE development model lab testing; MACE test article deployed on STS middeck; and development model testing.

  4. Recovery of a Charred Painting Using Atomic Oxygen Treatment

    NASA Technical Reports Server (NTRS)

    Rutledge, Sharon K.; Banks, Bruce A.; Chichernea, Virgil A.

    1999-01-01

    A noncontact method is described which uses atomic oxygen to remove soot and char from the surface of a painting. The atomic oxygen was generated by the dissociation of oxygen in low pressure air using radio frequency energy. The treatment, which is an oxidation process, allows control of the amount of material to be removed. The effectiveness of char removal from half of a fire-damaged oil painting was studied using reflected light measurements from selected areas of the painting and by visual and photographic observation. The atomic oxygen was able to effectively remove char and soot from the treated half of the painting. The remaining loosely bound pigment was lightly sprayed with a mist to replace the binder and then varnish was reapplied. Caution should he used when treating an untested paint medium using atomic oxygen. A representative edge or corner should he tested first in order to determine if the process would be safe for the pigments present. As more testing occurs, a greater knowledge base will be developed as to what types of paints and varnishes can or cannot be treated using this technique. With the proper precautions, atomic oxygen treatment does appear to be a technique with great potential for allowing very charred, previously unrestorable art to be salvaged.

  5. Terahertz reflection interferometry for automobile paint layer thickness measurement

    NASA Astrophysics Data System (ADS)

    Rahman, Aunik; Tator, Kenneth; Rahman, Anis

    2015-05-01

    Non-destructive terahertz reflection interferometry offers many advantages for sub-surface inspection such as interrogation of hidden defects and measurement of layers' thicknesses. Here, we describe a terahertz reflection interferometry (TRI) technique for non-contact measurement of paint panels where the paint is comprised of different layers of primer, basecoat, topcoat and clearcoat. Terahertz interferograms were generated by reflection from different layers of paints on a metallic substrate. These interferograms' peak spacing arising from the delay-time response of respective layers, allow one to model the thicknesses of the constituent layers. Interferograms generated at different incident angles show that the interferograms are more pronounced at certain angles than others. This "optimum" angle is also a function of different paint and substrate combinations. An automated angular scanning algorithm helps visualizing the evolution of the interferograms as a function of incident angle and also enables the identification of optimum reflection angle for a given paint-substrate combination. Additionally, scanning at different points on a substrate reveals that there are observable variations from one point to another of the same sample over its entire surface area. This ability may be used as a quality control tool for in-situ inspection in a production line. Keywords: Terahertz reflective interferometry, Paint and coating layers, Non-destructive

  6. Occupational Exposure to Benzene from Painting with Epoxy and Other High Performance Coatings

    SciTech Connect

    JAHN, STEVEN

    2005-04-20

    Following the discovery of trace benzene in paint products, an assessment was needed to determine potential for benzene exposures to exceed the established ACGIH Threshold Limit Value (TLV) during painting operations. Sample data was collected by area industrial hygienists for benzene during routine maintenance and construction activities at Savannah River Site. A set of available data from the IH database, Sentry, was analyzed to provide guidance to the industrial hygiene staff and draw conclusions on the exposure potential during typical painting operations.

  7. The Middeck Active Control Experiment (MACE): Identification for robust control

    NASA Astrophysics Data System (ADS)

    Karlov, Valery I.

    Viewgraphs on identification for robust control for the Middeck Active Control Experiment (MACE) are presented. Topics covered include: identification for robust control; three levels of identification; basic elements of the approach; advantages of 'post-ID' model of uncertainty; advantages of optimization; and practical realization.

  8. The Middeck Active Control Experiment (MACE): Identification for robust control

    NASA Technical Reports Server (NTRS)

    Karlov, Valery I.

    1992-01-01

    Viewgraphs on identification for robust control for the Middeck Active Control Experiment (MACE) are presented. Topics covered include: identification for robust control; three levels of identification; basic elements of the approach; advantages of 'post-ID' model of uncertainty; advantages of optimization; and practical realization.

  9. Painted supported lipid membranes

    PubMed Central

    Florin, E.-L.; Gaub, H. E.

    1993-01-01

    We report herein measurements on a novel type of supported lipid films, which we call painted supported membranes (PSM). These membranes are formed in a self-assembly process on alkylated gold films from an organic solution. The formation process was investigated with surface plasmon resonance microscopy. The optical and electrical properties of the films were determined for various types of lipids and as a function of temperature by means of cyclic voltammetry and potential relaxation after charge injection. We could show that these films exhibit an extraordinarily high specific resistivity which, depending on the lipid, may be as high as 109 ohm/cm2. We could also show that due to this low conductivity, an electrical polarization across the PSM relaxes with characteristic time constants of up to 20 min. The electrical properties together with their high mechanical stability and accessibility to surface sensitive techniques make these films well suitable model membranes for optical and electrical investigations. Examples for such applications are given in the subsequent article by Seifert et al. ImagesFIGURE 3FIGURE 4 PMID:19431873

  10. Atomic Oxygen Treatment Technique for Removal of Smoke Damage from Paintings

    NASA Technical Reports Server (NTRS)

    Rutledge, S. K.; Banks, B. A.

    1997-01-01

    Soot deposits that can accumulate on surfaces of a painting during a fire can be difficult to clean from some types of paintings without damaging the underlying paint layers. A non-contact technique has been developed which can remove the soot by allowing a gas containing atomic oxygen to flow over the surface and chemically react with the soot to form carbon monoxide and carbon dioxide. The reaction is limited to the surface, so the underlying paint is not touched. The process can be controlled so that the cleaning can be stopped once the paint surface is reached. This paper describes the smoke exposure and cleaning of untreated canvas, acrylic gesso, and sections of an oil painting using this technique. The samples were characterized by optical microscopy and reflectance spectroscopy.

  11. Student Activity Funds: Procedures & Controls.

    ERIC Educational Resources Information Center

    Cuzzetto, Charles E.

    Student activity funds may create educational opportunities for students, but they frequently create problems for business administrators. The first part of this work reviews the types of organizational issues and transactions an organized student group is likely to encounter, including establishing a constitution, participant roles,…

  12. Active-member control of precision structures

    NASA Technical Reports Server (NTRS)

    Fanson, J. L.; Blackwood, G. H.; Chu, C. C.

    1989-01-01

    This paper presents the results of closed loop experiments that use piezoelectric active-members to control the flexible motion of a precision truss structure. These experiments are directed toward the development of high performance structural systems as part of the Control/Structure Interaction program at JPL. Order of magnitude reductions in dynamic response are achieved with relatively simple control techniques. The practical implementation of high stiffness, high bandwidth active-members in a precision structure highlights specific issues of importance relating to the modelling and implementation of active-member control.

  13. Actively controlled shaft seals for aerospace applications

    NASA Technical Reports Server (NTRS)

    Salant, Richard F.

    1991-01-01

    Actively controlled mechanical seals have recently been developed for industrial use. This study investigates the feasibility of using such seals for aerospace applications. In a noncontacting mechanical seal, the film thickness depends on the geometry of the seal interface. The amount of coning, which is a measure of the radial convergence or divergence of the seal interface, has a primary effect on the film thickness. Active control of the film thickness is established by controlling the coning with a piezoelectric material. A mathematical model has been formulated to predict the performance of an actively controlled mechanical seal.

  14. Active Control Of Structure-Borne Noise

    NASA Astrophysics Data System (ADS)

    Elliott, S. J.

    1994-11-01

    The successful practical application of active noise control requires an understanding of both its acoustic limitations and the limitations of the electrical control strategy used. This paper is concerned with the active control of sound in enclosures. First, a review is presented of the fundamental physical limitations of using loudspeakers to achieve either global or local control. Both approaches are seen to have a high frequency limit, due to either the acoustic modal overlap, or the spatial correlation function of the pressure field. These physical performance limits could, in principle, be achieved with either a feedback or a feedforward control strategy. These strategies are reviewed and the use of adaptive digital filters is discussed for both approaches. The application of adaptive feedforward control in the control of engine and road noise in cars is described. Finally, an indirect approach to the active control of sound is discussed, in which the vibration is suppressed in the structural paths connecting the source of vibration to the enclosure. Two specific examples of this strategy are described, using an active automotive engine mount and the incorporation of actuators into helicopter struts to control gear-meshing tones. In both cases good passive design can minimize the complexity of the active controller.

  15. Graffiti for science: Qualitative detection of erosional patterns through bedrock erosion painting

    NASA Astrophysics Data System (ADS)

    Beer, Alexander R.; Kirchner, James W.; Turowski, Jens M.

    2016-04-01

    Bedrock erosion is a crucial constraint on stream channel incision, and hence whole landscape evolution, in steep mountainous terrain and tectonically active regions. Several interacting processes lead to bedrock erosion in stream channels, with hydraulic shear detachment, plucking, and abrasion due to sediment impacts generally being the most efficient. Bedrock topography, together with the sediment tools and cover effects, regulate the rate and spatial pattern of in situ surface change. Measurements of natural bedrock erosion rates are valuable for understanding the underlying process physics, as well as for modelling landscape evolution and designing engineered structures. However, quantifying spatially distributed bedrock erosion rates in natural settings is challenging and few such measurements exist. We studied spatial bedrock erosion in a 30m-long bedrock gorge in the Gornera, a glacial meltwater stream above Zermatt. This stream is flushed episodically with sediment-laden streamflow due to hydropower operations upstream, with negligible discharge in the gorge in between these flushing events. We coated several bedrock surface patches with environmentally safe, and water-insoluble outdoor paint to document the spatial pattern of surface abrasion, or to be more precise, to document its driving forces. During four consecutive years, the change of the painted areas was recorded repeatedly with photographs before the painting was renewed. These photographs visually documented the spatial patterns of vertical erosion (channel incision), of lateral erosion (channel widening) and of downstream-directed erosion (channel clearance). The observed qualitative patterns were verified through comparison to quantitative change detection analyses based on annual high-resolution terrestrial laser scanning surveys of the bedrock surfaces. Comparison of repeated photographs indicated a temporal cover effect and a general height limit of the tools effect above the streambed

  16. Aerobic metabolism and swimming energetics of the painted turtle, Chrysemys picta.

    PubMed

    Lowell, W R

    1990-01-01

    Oxygen consumption rates (VO2) were measured for painted turtles (Chrysemys picta) swimming in a respirometer at controlled speeds. Sustained specific swimming speeds ranged from 0.75 to 1.52 body lengths (L) per s. Over most of this range endurance exceeded 30 min. VO2 increased curvillinearly with swimming speed (U) and the maximum active rate was 9 times resting (0.26 ml O2/min), and 3 times routine (0.64 ml O2/min). Mass specific metabolic scope was 228 ml O2/(kg.h), similar to that reported for other active chelonians. Cost of transport increased from 3.86 to 5.72 J/(kg.m) over the speed range tested. Swimming costs for rowing painted turtles are greater than those for marine reptiles utilizing anguilliform or lift-producing hydrofoil propulsion. The increased swimming cost for the amphibious painted turtle suggests that morphological specializations permitting effective terrestrial transport, increase energetic expenditures during swimming. PMID:2365028

  17. Active vibration control of lightweight floor systems

    NASA Astrophysics Data System (ADS)

    Baader, J.; Fontana, M.

    2016-04-01

    Wide-span and lightweight floors are often prone to structural vibrations due to their low resonance frequency and poor material damping. Their dynamic behaviour can be improved using passive, semi-active or active vibration control devices. The following article proposes a novel method for the controller synthesis for active vibration control. An existing passive TMD (tuned mass damper) is modelled and equipped with an actuator in order to provide more efficient damping. Using an iterative optimization approach under constraints, an optimal controller is found which minimizes a quadratic cost function in frequency domain. A simulation of an existing test bench shows that the active vibration control device is able to provide increased damping compared to the passive TMD.

  18. Reliable and Affordable Control Systems Active Combustor Pattern Factor Control

    NASA Technical Reports Server (NTRS)

    McCarty, Bob; Tomondi, Chris; McGinley, Ray

    2004-01-01

    Active, closed-loop control of combustor pattern factor is a cooperative effort between Honeywell (formerly AlliedSignal) Engines and Systems and the NASA Glenn Research Center to reduce emissions and turbine-stator vane temperature variations, thereby enhancing engine performance and life, and reducing direct operating costs. Total fuel flow supplied to the engine is established by the speed/power control, but the distribution to individual atomizers will be controlled by the Active Combustor Pattern Factor Control (ACPFC). This system consist of three major components: multiple, thin-film sensors located on the turbine-stator vanes; fuel-flow modulators for individual atomizers; and control logic and algorithms within the electronic control.

  19. TESTING ANTIMICROBIAL PAINT EFFICACY ON GYPSUM WALLBOARD CONTAMINATED WITH STACHYBOTRYS CHARTARUM

    EPA Science Inventory

    Often mold contaminated building materials are not properly removed, some surface cleaning is performed and paint is applied in an attempt to alleviate the problem. The efficacy of antimicrobial paints to eliminate or control mold regrowth on surfaces can easily be tested on non-...

  20. Active Control by Conservation of Energy Concept

    NASA Technical Reports Server (NTRS)

    Maestrello, Lucio

    2000-01-01

    Three unrelated experiments are discussed; each was extremely sensitive to initial conditions. The initial conditions are the beginnings of the origins of the information that nonlinearity displays. Initial conditions make the phenomenon unstable and unpredictable. With the knowledge of the initial conditions, active control requires far less power than that present in the system response. The first experiment is on the control of shocks from an axisymmetric supersonic jet; the second, control of a nonlinear panel response forced by turbulent boundary layer and sound; the third, control of subharmonic and harmonics of a panel forced by sound. In all three experiments, control is achieved by redistribution of periodic energy response such that the energy is nearly preserved from a previous uncontrolled state. This type of active control improves the performance of the system being controlled.

  1. Ultraviolet-radiation-curable paints

    SciTech Connect

    Grosset, A M; Su, W F.A.; Vanderglas, E

    1981-09-30

    In product finishing lines, ultraviolet radiation curing of paints on prefabricated structures could be more energy efficient than curing by natural gas fired ovens, and could eliminate solvent emission. Diffuse ultraviolet light can cure paints on three dimensional metal parts. In the uv curing process, the spectral output of radiation sources must complement the absorption spectra of pigments and photoactive agents. Photosensitive compounds, such as thioxanthones, can photoinitiate unsaturated resins, such as acrylated polyurethanes, by a free radical mechanism. Newly developed cationic photoinitiators, such as sulfonium or iodonium salts (the so-called onium salts) of complex metal halide anions, can be used in polymerization of epoxy paints by ultraviolet light radiation. One-coat enamels, topcoats, and primers have been developed which can be photoinitiated to produce hard, adherent films. This process has been tested in a laboratory scale unit by spray coating these materials on three-dimensional objects and passing them through a tunnel containing uv lamps.

  2. Lead levels in new enamel household paints from Asia, Africa and South America.

    PubMed

    Clark, C Scott; Rampal, Krishna G; Thuppil, Venkatesh; Roda, Sandy M; Succop, Paul; Menrath, William; Chen, Chin K; Adebamowo, Eugenious O; Agbede, Oluwole A; Sridhar, Mynepalli K C; Adebamowo, Clement A; Zakaria, Yehia; El-Safty, Amal; Shinde, Rana M; Yu, Jiefei

    2009-10-01

    In 2006 a report on the analysis for lead in 80 new residential paints from four countries in Asia revealed high levels in three of the countries (China, India and Malaysia) and low levels in a fourth country (Singapore) where a lead in paint regulation was enforced. The authors warned of the possible export of lead-painted consumer products to the United States and other countries and the dangers the lead paint represented to children in the countries where it was available for purchase. The need for a worldwide ban on the use of lead in paints was emphasized to prevent an increase in exposure and disease from this very preventable environmental source. Since the earlier paper almost 300 additional new paint samples have been collected from the four initial countries plus 8 additional countries, three from Asia, three from Africa and two from South America. During the intervening time period two million toys and other items imported into the United States were recalled because the lead content exceeded the United States standard. High lead paints were detected in all 12 countries. The average lead concentration by country ranged from 6988 (Singapore) to 31,960ppm (Ecuador). One multinational company sold high lead paint in one country through January 2007 but sold low lead paint later in 2007 indicating that a major change to cease adding lead to their paints had occurred. However, the finding that almost one-third of the samples would meet the new United States standard for new paint of 90ppm, suggests that the technology is already available in at least 11 of the 12 countries to produce low lead enamel paints for domestic use. The need remains urgent to establish effective worldwide controls to prevent the needless poisoning of millions of children from this preventable exposure. PMID:19656507

  3. Active control of buildings during earthquakes

    NASA Technical Reports Server (NTRS)

    Vance, Vicki L.

    1993-01-01

    The objective of this report is to provide an overview of the different types of control systems used in buildings, to discuss the problems associated with current active control mechanisms, and to show the cost-effectiveness of applying active control to buildings. In addition, a small case study investigates the feasibility and benefits of using embedded actuators in buildings. Use of embedded actuators could solve many of the current problems associated with active control by providing a wider bandwidth of control, quicker speed of response, increased reliability and reduced power requirement. Though embedded actuators have not been developed for buildings, they have previously been used in space structures. Many similarities exist between large civil and aerospace structures indicating that direct transfer of concepts between the two disciplines may be possible. In particular, much of the Controls-Structures Interaction (CSI) technology currently being developed could be beneficially applied to civil structures. While several buildings with active control systems have been constructed in Japan, additional research and experimental verification are necessary before active control systems become widely accepted and implemented.

  4. Manually controlled neutron-activation system

    NASA Astrophysics Data System (ADS)

    Johns, R. A.; Carothers, G. A.

    1982-01-01

    A manually controlled neutron activation system, the Manual Reactor Activation System, was designed and built and has been operating at one of the Savannah River Plant's production reactors. With this system, samples can be irradiated for up to 24 hours and pneumatically transferred to a shielded repository for decay until their activity is low enough for them to be handled at a radiobench. The Manual Reactor Activation System was built to provide neutron activation of solid waste forms for the Alternative Waste Forms Leach Testing Program. Neutron activation of the bulk sample prior to leaching permits sensitive multielement radiometric analyses of the leachates.

  5. ATMOSPHERIC ACID DEPOSITION DAMAGE TO PAINTS

    EPA Science Inventory

    Available data from laboratory and field studies of damage to paints by erosion have been analyzed to develop an atmospheric acid deposition damage function for exterior house paints containing calcium carbonate or silicate extenders. Regression analysis coefficients associated w...

  6. EVALUATION OF LOW-VOC LATEX PAINTS

    EPA Science Inventory

    The paper gives results of an evaluation of four commercially available low-VOC (volatile organic compound) latex paints as substitutes for conventional latex paints by assessing both their emission characteristics and their performance as coatings. Bulk analysis indicated that ...

  7. Controls on fire activity over the Holocene

    NASA Astrophysics Data System (ADS)

    Kloster, S.; Brucher, T.; Brovkin, V.; Wilkenskjeld, S.

    2015-05-01

    Changes in fire activity over the last 8000 years are simulated with a global fire model driven by changes in climate and vegetation cover. The changes were separated into those caused through variations in fuel availability, fuel moisture or wind speed, which react differently to changes in climate. Disentangling these controlling factors helps in understanding the overall climate control on fire activity over the Holocene. Globally the burned area is simulated to increase by 2.5% between 8000 and 200 cal yr BP, with larger regional changes compensating nearly evening out on a global scale. Despite the absence of anthropogenic fire ignitions, the simulated trends in fire activity agree reasonably well with continental-scale reconstructions from charcoal records, with the exception of Europe. For some regions the change in fire activity is predominantly controlled through changes in fuel availability (Australia monsoon, Central America tropics/subtropics). For other regions changes in fuel moisture are more important for the overall trend in fire activity (North America, Sub-Saharan Africa, Europe, Asia monsoon). In Sub-Saharan Africa, for example, changes in fuel moisture alone lead to an increase in fire activity between 8000 and 200 cal yr BP, while changes in fuel availability lead to a decrease. Overall, the fuel moisture control is dominating the simulated fire activity for Sub-Saharan Africa. The simulations clearly demonstrate that both changes in fuel availability and changes in fuel moisture are important drivers for the fire activity over the Holocene. Fuel availability and fuel moisture do, however, have different climate controls. As such, observed changes in fire activity cannot be related to single climate parameters such as precipitation or temperature alone. Fire models, as applied in this study, in combination with observational records can help in understanding the climate control on fire activity, which is essential to project future fire

  8. ACTIVELY CONTROLLED AFTERBURNER FOR COMPACT WASTE INCINERATION

    EPA Science Inventory

    In a continuing research program directed at developing technology for compact shipboard incinerators, active control of fluid dynamics has been used to enhance mixing in incinerator afterburner (AB) experiments and increase the DRE for a waste surrogate. Experiments were conduc...

  9. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.

    1991-07-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: science program objectives and rationale; science requirements; capturing the essential physics; science development approach; development model hardware; development model test plan; and flight hardware and operations.

  10. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.

    1991-01-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: science program objectives and rationale; science requirements; capturing the essential physics; science development approach; development model hardware; development model test plan; and flight hardware and operations.

  11. Active control of turbomachine discrete tones

    NASA Astrophysics Data System (ADS)

    Fleeter, Sanford

    This paper was directed at active control of discrete frequency noise generated by subsonic blade rows through cancellation of the blade row interaction generated propagating acoustic waves. First discrete frequency noise generated by a rotor and stator in a duct was analyzed to determine the propagating acoustic pressure waves. Then a mathematical model was developed to analyze and predict the active control of discrete frequency noise generated by subsonic blade rows through cancellation of the propagating acoustic waves, accomplished by utilizing oscillating airfoil surfaces to generate additional control propagating pressure waves. These control waves interact with the propagating acoustic waves, thereby, in principle, canceling the acoustic waves and thus, the far field discrete frequency tones. This model was then applied to a fan exit guide vane to investigate active airfoil surface techniques for control of the propagating acoustic waves, and thus the far field discrete frequency tones, generated by blade row interactions.

  12. Aesthetic Emotions Across Arts: A Comparison Between Painting and Music.

    PubMed

    Miu, Andrei C; Pițur, Simina; Szentágotai-Tătar, Aurora

    2015-01-01

    Emotional responses to art have long been subject of debate, but only recently have they started to be investigated in affective science. The aim of this study was to compare perceptions regarding frequency of aesthetic emotions, contributing factors, and motivation which characterize the experiences of looking at painting and listening to music. Parallel surveys were filled in online by participants (N = 971) interested in music and painting. By comparing self-reported characteristics of these experiences, this study found that compared to listening to music, looking at painting was associated with increased frequency of wonder and decreased frequencies of joyful activation and power. In addition to increased vitality, as reflected by the latter two emotions, listening to music was also more frequently associated with emotions such as tenderness, nostalgia, peacefulness, and sadness. Compared to painting-related emotions, music-related emotions were perceived as more similar to emotions in other everyday life situations. Participants reported that stimulus features and previous knowledge made more important contributions to emotional responses to painting, whereas prior mood, physical context and the presence of other people were considered more important in relation to emotional responses to music. Self-education motivation was more frequently associated with looking at painting, whereas mood repair and keeping company motivations were reported more frequently in relation to listening to music. Participants with visual arts education reported increased vitality-related emotions in their experience of looking at painting. In contrast, no relation was found between music education and emotional responses to music. These findings offer a more general perspective on aesthetic emotions and encourage integrative research linking different types of aesthetic experience. PMID:26779072

  13. Aesthetic Emotions Across Arts: A Comparison Between Painting and Music

    PubMed Central

    Miu, Andrei C.; Pițur, Simina; Szentágotai-Tătar, Aurora

    2016-01-01

    Emotional responses to art have long been subject of debate, but only recently have they started to be investigated in affective science. The aim of this study was to compare perceptions regarding frequency of aesthetic emotions, contributing factors, and motivation which characterize the experiences of looking at painting and listening to music. Parallel surveys were filled in online by participants (N = 971) interested in music and painting. By comparing self-reported characteristics of these experiences, this study found that compared to listening to music, looking at painting was associated with increased frequency of wonder and decreased frequencies of joyful activation and power. In addition to increased vitality, as reflected by the latter two emotions, listening to music was also more frequently associated with emotions such as tenderness, nostalgia, peacefulness, and sadness. Compared to painting-related emotions, music-related emotions were perceived as more similar to emotions in other everyday life situations. Participants reported that stimulus features and previous knowledge made more important contributions to emotional responses to painting, whereas prior mood, physical context and the presence of other people were considered more important in relation to emotional responses to music. Self-education motivation was more frequently associated with looking at painting, whereas mood repair and keeping company motivations were reported more frequently in relation to listening to music. Participants with visual arts education reported increased vitality-related emotions in their experience of looking at painting. In contrast, no relation was found between music education and emotional responses to music. These findings offer a more general perspective on aesthetic emotions and encourage integrative research linking different types of aesthetic experience. PMID:26779072

  14. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When... requirements apply. Except as otherwise provided in this part, the description “Paint” is the proper...

  15. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When... requirements apply. Except as otherwise provided in this part, the description “Paint” is the proper...

  16. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When... requirements apply. Except as otherwise provided in this part, the description “Paint” is the proper...

  17. Active Polymer Microfiber with Controlled Polarization Sensitivity

    PubMed Central

    Xia, Hongyan; Wang, Ruxue; Liu, Yingying; Cheng, Junjie; Zou, Gang; Zhang, Qijin; Zhang, Douguo; Wang, Pei; Ming, Hai; Badugu, Ramachandram; Lakowicz, Joseph R.

    2016-01-01

    Controlled Polarization Sensitivity of an active polymer microfiber has been proposed and realized with the electrospun method. The fluorescence intensity guiding through this active polymer microfiber shows high sensitivity to the polarization state of the excitation light. What is more, the fluorescence out-coupled from tip of the microfiber can be of designed polarization state. Principle of these phenomena lies on the ordered and controlled orientation of the polydiacetylene (PDA) main chains inside polymer microfiber. PMID:27099828

  18. Active control of helicopter transmission noise

    NASA Astrophysics Data System (ADS)

    Spencer, R. H.; Burke, M. J.; Tye, G. W.

    An account is given of an effort to reduce helicopter transmission noise by 10 dB, using active methods, as part of the NASA-Lewis/U.S. Army Propulsion Directorate Advanced Rotorcraft Transmission technology integration and demonstration program. The transmission used as a test stand is that of the CH-47C forward rotor. Attention is presently given to the active control system's actuators, sensors, and control algorithms.

  19. Active control of helicopter transmission noise

    NASA Technical Reports Server (NTRS)

    Spencer, R. H.; Burke, M. J.; Tye, G. W.

    1991-01-01

    An account is given of an effort to reduce helicopter transmission noise by 10 dB, using active methods, as part of the NASA-Lewis/U.S. Army Propulsion Directorate Advanced Rotorcraft Transmission technology integration and demonstration program. The transmission used as a test stand is that of the CH-47C forward rotor. Attention is presently given to the active control system's actuators, sensors, and control algorithms.

  20. Vector control activities, fiscal year 1983

    SciTech Connect

    Pickard, E.; Cooney, J.C.; McDuff, B.R.

    1984-07-01

    The goal of the Vector Control Program is to safeguard public health and well-being in the Tennessee Valley region by controlling arthropod pests of medical importance that are propagated on TVA lands or waters or that are produced as a result of TVA activities. To achieve this goal the program is divided into two major categories consisting of operations and support studies. The latter is geared to improving the operational effectiveness and efficiency of the control program and to identify additional vector control problems requiring TVA attention and study. Nonchemical methods of control are emphasized and are supplemented with chemical measures as needed.

  1. Transitioning Active Flow Control to Applications

    NASA Technical Reports Server (NTRS)

    Joslin, Ronald D.; Horta, Lucas G.; Chen, Fang-Jenq

    1999-01-01

    Active Flow Control Programs at NASA, the U.S. Air Force, and DARPA have been initiated with the goals of obtaining revolutionary advances in aerodynamic performance and maneuvering compared to conventional approaches. These programs envision the use of actuators, sensors, and controllers on applications such as aircraft wings/tails, engine nacelles, internal ducts, nozzles, projectiles, weapons bays, and hydrodynamic vehicles. Anticipated benefits of flow control include reduced weight, part count, and operating cost and reduced fuel burn (and emissions), noise and enhanced safety if the sensors serve a dual role of flow control and health monitoring. To get from the bench-top or laboratory test to adaptive distributed control systems on realistic applications, reliable validated design tools are needed in addition to sub- and large-scale wind-tunnel and flight experiments. This paper will focus on the development of tools for active flow control applications.

  2. Active load control techniques for wind turbines.

    SciTech Connect

    van Dam, C.P.; Berg, Dale E.; Johnson, Scott J.

    2008-07-01

    This report provides an overview on the current state of wind turbine control and introduces a number of active techniques that could be potentially used for control of wind turbine blades. The focus is on research regarding active flow control (AFC) as it applies to wind turbine performance and loads. The techniques and concepts described here are often described as 'smart structures' or 'smart rotor control'. This field is rapidly growing and there are numerous concepts currently being investigated around the world; some concepts already are focused on the wind energy industry and others are intended for use in other fields, but have the potential for wind turbine control. An AFC system can be broken into three categories: controls and sensors, actuators and devices, and the flow phenomena. This report focuses on the research involved with the actuators and devices and the generated flow phenomena caused by each device.

  3. Student Activity Funds: Procedures and Controls.

    ERIC Educational Resources Information Center

    Cuzzetto, Charles E.

    2000-01-01

    An effective internal-control system can help school business administrators meet the challenges of accounting for student activity funds. Such a system should include appropriate policies and procedures, identification of key control points, self-assessments, audit trails, and internal and external audits. (MLH)

  4. Optimal active control for Burgers equations

    NASA Technical Reports Server (NTRS)

    Ikeda, Yutaka

    1994-01-01

    A method for active fluid flow control based on control theory is discussed. Dynamic programming and fixed point successive approximations are used to accommodate the nonlinear control problem. The long-term goal of this project is to establish an effective method applicable to complex flows such as turbulence and jets. However, in this report, the method is applied to stochastic Burgers equation as an intermediate step towards this goal. Numerical results are compared with those obtained by gradient search methods.

  5. Qualification of black electrically conductive paint

    NASA Technical Reports Server (NTRS)

    Park, J. J.; Clatterbuck, C. H.

    1979-01-01

    A paint having low electrical resistance has been developed. Using a low outgassing polyurethane resin, specific amounts of conductive carbon particles were added to produce paint compositions having a range of electrical resistance. Methods of testing for electrical resistance are discussed. The adhesion of these paints has been tested successfully over the temperature range from liquid nitrogen temperature up to 80 C (176 F).

  6. Drawing and Painting with Under-Threes.

    ERIC Educational Resources Information Center

    Kolbe, Ursula; Smyth, Jane

    2000-01-01

    Noting that drawing and painting offer very young children powerful ways to explore and communicate thoughts and feelings, this booklet for caregivers and teachers offers suggestions related to painting and drawing for children under 3 years. The booklet discusses what young children can do with drawing and painting materials, including exploring…

  7. 29 CFR 1915.35 - Painting.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Painting. 1915.35 Section 1915.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Surface Preparation and Preservation § 1915.35 Painting. (a) Paints mixed...

  8. Bringing Art to Life through Living Paintings

    ERIC Educational Resources Information Center

    Stillwagon, Joanne

    2005-01-01

    In this article, the author relates how she and other art teachers developed a "living painting" lesson, an art lesson that incorporates art history and painting. The lesson was developed also in part to help new student-teachers plan a memorable lesson. With the living painting lesson, students will have to choose and recreate famous paintings…

  9. EMISSIONS OF ODOROUS ALDEHYDES FROM ALKYD PAINT

    EPA Science Inventory

    Aldehyde emissions are widely held responsible for the acrid after-odor of drying alkyd-based paint films. The aldehyde emissions from three different alkyd paints were measured in small environmental chambers. It was found that, for each alkyd paint applied, more than 2 mg of ...

  10. Bioassay procedures and health physics recommendations for a promethium-147 luminescent dial painting industry

    SciTech Connect

    Dunlap, J.H.

    1981-01-01

    A study was conducted to determine the hazard to workers who were applying a radioactive luminescent paint to devices such as clock dials and hands, signs, etc. The paint used was a mixture of macrospheres containing /sup 147/Pm, ZnS, and a binder. It was applied by workers either manually or by machine. This study was designed to determine the radiological safety of these operations. The potential routes of intake of /sup 147/Pm by workers were identified as inhalation and ingestion. Air samples were taken at work stations; total and respirable-sized /sup 147/Pm particles were measured. Both were shown to be at a safe level. An animal inhalation study was conducted to determine deposition of respirable-sized /sup 147/Pm particles. Testing by a bioassay procedure developed specifically for this purpose revealed low levels of deposited activity in the respiratory systems of these animals. A health physics evaluation of the dial painting facility firm and operation revealed that extensive improvements in engineering controls and worker protection were needed. The health physics recommendations made, as a result, should be adopted as a minimum for maximization of long term benefits to both the employee and the employer.

  11. Respiratory effects of exposure of shipyard workers to epoxy paints.

    PubMed Central

    Rempel, D; Jones, J; Atterbury, M; Balmes, J

    1991-01-01

    Epoxy resin systems have been associated with occupational asthma in several case reports, but medical publications contain little on the potential adverse respiratory effects of these chemicals in exposed worker populations. To further evaluate the association of workplace exposure to epoxy paints and respiratory dysfunction, the cross workshift changes in pulmonary function and symptoms of 32 shipyard painters exposed to epoxy paints were compared with 28 shipyard painters not exposed to epoxy paints. The prevalence of lower respiratory tract symptoms was significantly higher among painters exposed to epoxy paints compared with controls. Among exposed painters the mean cross workshift change in forced expiratory volume in one second (FEV1) (-3.4%) was greater than the decrement in the non-exposed group (-1.4%). A significant linear relation was seen between % decrement in FEV1 and hours of exposure to epoxy paints. This study suggests that epoxy resin coatings as used by shipyard painters are associated with increased lower respiratory tract symptoms and acute decrements in FEV1. Adequate respiratory protection and medical surveillance programmes should be established in workplaces where exposure to epoxy resin systems occurs. PMID:1954156

  12. A Hydrodynamic Instability Is Used to Create Aesthetically Appealing Patterns in Painting

    PubMed Central

    Zetina, Sandra; Godínez, Francisco A.; Zenit, Roberto

    2015-01-01

    Painters often acquire a deep empirical knowledge of the way in which paints and inks behave. Through experimentation and practice, they can control the way in which fluids move and deform to create textures and images. David Alfaro Siqueiros, a recognized Mexican muralist, invented an accidental painting technique to create new and unexpected textures. By pouring layers of paint of different colors on a horizontal surface, the paints infiltrate into each other creating patterns of aesthetic value. In this investigation, we reproduce the technique in a controlled manner. We found that for the correct color combination, the dual viscous layer becomes Rayleigh-Taylor unstable: the density mismatch of the two color paints drives the formation of a spotted pattern. Experiments and a linear instability analysis were conducted to understand the properties of the process. We also argue that this flow configuration can be used to study the linear properties of this instability. PMID:25942586

  13. Active vibration control of civil structures

    SciTech Connect

    Farrar, C.; Baker, W.; Fales, J.; Shevitz, D.

    1996-11-01

    This is a final report of a one year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Active vibration control (AVC) of structural and mechanical systems is one of the rapidly advancing areas of engineering research. The multifaceted nature of AVC covers many disciplines, such as sensors and instrumentation, numerical modeling, experimental mechanics, and advanced power systems. This work encompassed a review of the literature on active control of structures focusing both on active control hardware and on control algorithms, a design of an isolation systems using magneto-rheological fluid-filled (MRF) dampers and numerical simulations to study the enhanced vibration mitigation effects of this technology.

  14. EVALUATION OF INNOVATIVE PAINTING PROCESSES

    EPA Science Inventory

    The report gives results of an evaluation of two novel spray painting techniques that may decrease volatile organic compound (VOC) emissions associated with the application of surface coatings. ne technique uses supercritical carbon dioxide (CO2) as a solvent and a propellant to ...

  15. Paint the World with Light

    ERIC Educational Resources Information Center

    Gran, David

    2010-01-01

    Two classrooms on opposite sides of the world happened to be working on a very similar project at the same time. In both Shanghai, China, and Palm Springs, California, students were learning how to turn their flashlights and other light-emitting objects into paintbrushes. Light painting is a form of long-exposure photography in which the shutter…

  16. Stop and Paint the Flowers.

    ERIC Educational Resources Information Center

    Phillips, Shelley

    2002-01-01

    Describes an art lesson where students used watercolors to paint a flower bouquet arranged in a vase. Explains that the students viewed examples of flower bouquets by artists such as Vincent van Gogh and Odilon Redon. Discusses, in detail, the process of creating the artworks. (CMK)

  17. Chicanos Paint Their Way Back.

    ERIC Educational Resources Information Center

    Treguer, Annick

    1999-01-01

    In Tucson (Arizona) and El Paso (Texas), Chicano mural painters and art educators have begun community programs to engage alienated Chicano and Yaqui youth in painting murals that defuse gang conflicts, celebrate Mexican culture and history, and provide training in marketable skills. (SV)

  18. Basking Behavior of Painted Turtles.

    ERIC Educational Resources Information Center

    Zipko, Stephen J.

    1982-01-01

    Examines the basking postures of captive eastern painted turtles exposed to two different sources of illumination (white floor lamps and infrared heat lamps) and three types of substrates (sphagnum, rock, wood) and discusses possible ecological and evolutionary significance of these behaviors. (Author/JN)

  19. Vector control activities: Fiscal Year, 1986

    SciTech Connect

    Not Available

    1987-04-01

    The program is divided into two major components - operations and support studies. The support studies are designed to improve the operational effectiveness and efficiency of the control program and to identify other vector control problems requiring TVA attention and study. Nonchemical methods of control are emphasized and are supplemented with chemical measures as needed. TVA also cooperates with various concerned municipalities in identifying blood-sucking arthropod pest problems and demonstrating control techniques useful in establishing abatement programs, and provides technical assistance to other TVA programs and organizations. The program also helps Land Between The Lakes (LBL) plan and conduct vector control operations and tick control research. Specific program control activities and support studies are discussed.

  20. But when was it painted?

    NASA Astrophysics Data System (ADS)

    Lundstad, E.; Woll, G.

    2009-04-01

    The Munch Museum, Oslo, Norway, is dedicated to the visual works of the famous Norwegian painter Edvard Munch (1863 - 1944). Edvard Munch was a symbolist, expressionist painter and printmaker from Oslo, Norway. He was regarded as the pioneer of the amazing Expressionist movement. His art work from the late 1800's is the most well known, but his later work is gradually attracting more attention and is quite an inspiration of many of today's artists. The Munch Museum catalogue for 2008 contains about 1700 paintings of which virtually very few have a precise date. Even when the artist has written the year on the painting itself, there may be a significant uncertainty about this date, and partly due to unclear writing making it difficult to interpret the numbers. This means that other sources need to be applied to verify an accurate date. The climatologist at the Norwegian Meteorological Institute can help dating paintings of Munch. E. g. the painting "Standing Woman with Arms Folded". The painting shows a woman in front of a hill with much snow. The location is almost certainty Grimsrød on Jeløya, a property Munch began renting on March 1, 1913. Jeløya is an island at the southeastcoast of Norway near the town Moss. Jeløya has usually not so much snow because it is near by the sea and windy. The last digit in the date is unclear and has been read as both '3' and '5'. The woman in the portrait, Ingeborg Kaurin, was Munch's model up to the beginning of 1915, so both dates are possible. The year written on the painting has been read as both 1913 and 1915, and since 1974 it has usually been interpreted as 1913 (Stenersensamlingen's catalogue 1974). In the project "But when was it painted?" disclose that it could be another year. One way to reconsider when a painting was painted is to study geophysical characteristics and consider historical observations of snow. The method that is used here is to study daily meteorological snow data from this period from the

  1. CFD Modeling for Active Flow Control

    NASA Technical Reports Server (NTRS)

    Buning, Pieter G.

    2001-01-01

    This presentation describes current work under UEET Active Flow Control CFD Research Tool Development. The goal of this work is to develop computational tools for inlet active flow control design. This year s objectives were to perform CFD simulations of fully gridded vane vortex generators, micro-vortex genera- tors, and synthetic jets, and to compare flowfield results with wind tunnel tests of simple geometries with flow control devices. Comparisons are shown for a single micro-vortex generator on a flat plate, and for flow over an expansion ramp with sidewall effects. Vortex core location, pressure gradient and oil flow patterns are compared between experiment and computation. This work lays the groundwork for evaluating simplified modeling of arrays of devices, and provides the opportunity to test simple flow control device/sensor/ control loop interaction.

  2. Active control of robot manipulator compliance

    NASA Technical Reports Server (NTRS)

    Nguyen, C. C.; Pooran, F. J.

    1986-01-01

    Work performed at Catholic University on the research grant entitled Active Control of Robot Manipulator Compliance, supported by NASA/Goddard space Flight Center during the period of May 15th, 1986 to November 15th, 1986 is described. The modelling of the two-degree-of-freedom robot is first presented. Then the complete system including the robot and the hybrid controller is simulated on an IBM-XT Personal Computer. Simulation results showed that proper adjustments of controller gains enable the robot to perform successful operations. Further research should focus on developing a guideline for the controller gain design to achieve system stability.

  3. Optimal control techniques for active noise suppression

    NASA Technical Reports Server (NTRS)

    Banks, H. T.; Keeling, S. L.; Silcox, R. J.

    1988-01-01

    Active suppression of noise in a bounded enclosure is considered within the framework of optimal control theory. A sinusoidal pressure field due to exterior offending noise sources is assumed to be known in a neighborhood of interior sensors. The pressure field due to interior controlling sources is assumed to be governed by a nonhomogeneous wave equation within the enclosure and by a special boundary condition designed to accommodate frequency-dependent reflection properties of the enclosure boundary. The form of the controlling sources is determined by considering the steady-state behavior of the system, and it is established that the control strategy proposed is stable and asymptotically optimal.

  4. Residue detection for real-time removal of paint from metallic surfaces

    NASA Technical Reports Server (NTRS)

    Bar-Cohen, Yoseph; Bao, Xiaoqi; Dolgin, Benjamin; Marzwell, Neville

    2001-01-01

    Paint stripping from large steel ships and other metallic surfaces is a major issue in the maintenance and refurbishing of structures, and environmental concerns are greatly limiting the possible options. As a result, waterjet with water recycling has become the leading form of paint stripping and robotic manipulators with scanning bridges were constructed by various manufacturers to address this need. The application of such scanning bridges is slow and their access is constrained by the complex shape of the ship hull and various features on the surface. To overcome these limitations, a robotic system that is called Ultrastrip (UltraStrip Systems, Inc., Stuart, FL) is developed. This system uses magnetic wheels to attach the stripper to the structure and travel on it while performing paint stripping. To assure efficient paint stripping feedback data is required to control the travel speed by monitoring the paint thickness before and during the stripping process. Efforts at JPL are currently underway to develop the required feedback capability to assure effective paint stripping. Various possible sensors were considered and issues that can affect the sensitivity, reliability and applicability of the sensors are being investigated with emphasis on measuring the initial conditions of the paint. Issues that affect the sensory data in dynamic conditions are addressed while providing real-time real feedback for the control of the paint stripper speed of travel.

  5. Development of PET imaging-based dose-painting prescriptions

    NASA Astrophysics Data System (ADS)

    Bowen, Stephen R.

    Historically, prescriptions in radiation therapy are based on physician experience drawn from the results of extensive clinical trials in order to establish standard-of-care guidelines. The doses of radiation are generally uniform across target volumes to reflect a fixed level of local neoplastic disease control of the population mean. However, inter-patient and intra-tumor variation in response to uniform doses can result in diminished tumor control and poor clinical outcome for certain patients. Recent research endeavors are emphasizing the need to individualize prescriptions by incorporating patient-specific biological markers with prognostic and predictive value. Quantitative imaging with positron emission tomography (PET) of tumor glucose metabolism, cell proliferation, and hypoxia has been suggested as a sensitive and specific technique to tailor patient prescriptions in a manner that may significantly improve clinical outcome. The concept of prescribing and delivering non-uniform dose based on molecular imaging, termed dose painting, hinges on the establishment of a dose-response relationship at the image voxel scale that optimizes a particular clinical endpoint. This doctoral thesis presented two methods of defining dose-painting prescriptions based on PET imaging: the first was a heuristic model derivation of hypoxia dose-painting prescriptions in head-and-neck cancer patients; the second was an empirical imaging surrogate endpoint derivation of prescriptions in veterinary sinonasal cancer patients. The clinical implementation of these dose painting prescriptions was investigated, which emphasized treatment planning and delivery solutions. Lastly, a summary and discussion of the future of dose painting to forge links between tumor biology and clinical outcome was presented. The compelling dose painting concept is fast becoming a clinical reality that may positively impact cancer patient lives.

  6. STRATIFICATION OF PARTICULATE AND VOC POLLUTANTS IN PAINT SPRAY BOOTHS

    EPA Science Inventory

    The paper discusses flow management as part of a joint EPA/U.S. Air Force program on emissions from paint spray booths. he goal of the program is to identify and develop efficienct and economical emissions control concepts for this source. low management is one potential solution...

  7. Rapid New Methods for Paint Collection and Lead Extraction

    EPA Science Inventory

    Chronic exposure of children to lead (Ph) can result in permanent physiologic impairment. In adults, it can cause irritability, poor muscle coordination, and nerve damage to the sense organs and nerves controlling the body. Surfaces coated with Pb-containing paints are potential ...

  8. Active control of buckling of flexible beams

    NASA Technical Reports Server (NTRS)

    Baz, A.; Tampe, L.

    1989-01-01

    The feasibility of using the rapidly growing technology of the shape memory alloys actuators in actively controlling the buckling of large flexible structures is investigated. The need for such buckling control systems is becoming inevitable as the design trends of large space structures have resulted in the use of structural members that are long, slender, and very flexible. In addition, as these truss members are subjected mainly to longitudinal loading they become susceptible to structural instabilities due to buckling. Proper control of such instabilities is essential to the effective performance of the structures as stable platforms for communication and observation. Mathematical models are presented that simulate the dynamic characteristics of the shape memory actuator, the compressive structural members, and the associated active control system. A closed-loop computer-controlled system is designed, based on the developed mathematical models, and implemented to control the buckling of simple beams. The performance of the computer-controlled system is evaluated experimentally and compared with the theoretical predictions to validate the developed models. The obtained results emphasize the importance of buckling control and suggest the potential of the shape memory actuators as attractive means for controlling structural deformation in a simple and reliable way.

  9. Rotor Flapping Response to Active Control

    NASA Technical Reports Server (NTRS)

    Nguyen, Khanh; Johnson, Wayne

    2004-01-01

    Rotor active control using higher harmonic blade pitch has been proposed as a means to reduce both rotor radiated noise and airframe vibration and to enhance rotor performance. The higher harmonic input, however, can affect rotor thrust and cyclic flapping - the basic trim characteristics of the rotor. Some of the trim changes can negate the active control benefits. For example, wind tunnel test results of a full scale BO-105 rotor with individual-blade control indicate some rotor performance improvements, accompanied with changes in rotor trim, using two-per-rev blade pitch input. The observed performance benefits could therefore be a simple manifestation of the trim change rather than an efficient redistribution of the rotor airloads. More recently, the flight test of the BO-105 helicopter equip,ped with individual-blade-control actuators also reported trim changes whenever the two-per-rev blade pitch for noise reduction was activated. The pilot had to adjust the trim control to maintain the aircraft under a constant flight path. These two cases highlight the, importance of trim considerations in the application of active control to rotorcraft.

  10. Estimation of polishing and leaching behaviour of antifouling paints using mathematical modelling: a literature review.

    PubMed

    Kiil, Søren; Dam-Johansen, Kim; Weinell, Claus E; Pedersen, Michael S; Codolar, Santiago Arîas

    2003-04-01

    The development of chemically active antifouling paints has traditionally been based on an empirical approach. Optimisation and evaluation of novel and existing products are frequently conducted by means of, for example, systematic paint rotary tests in the laboratory or at sea sites. In this review, the usefulness of combining rotary experiments with the development of detailed mathematical models of paint behaviour will be discussed with reference to the relevant literature. Mathematical models can generally be used in the design of suitable release systems for various active components such as proteins or biocides, as well as for the estimation of release rates from different compositions of paints under various seawater conditions. Insoluble matrix, soluble matrix and self-polishing paints will be considered. Simulations from recent publications that show the effects of dynamic changes in seawater on paint behaviour will be presented. Examples of potential uses of paint models for accelerated polishing and leaching tests and screening of novel paint components will also be discussed. Directions of future modelling work are suggested. PMID:14618702

  11. Actively controlled shaft seals for aerospace applications

    NASA Technical Reports Server (NTRS)

    Salant, Richard F.

    1994-01-01

    This study experimentally investigates an actively controlled mechanical seal for aerospace applications. The seal of interest is a gas seal, which is considerably more compact than previous actively controlled mechanical seals that were developed for industrial use. In a mechanical seal, the radial convergence of the seal interface has a primary effect on the film thickness. Active control of the film thickness is established by controlling the radial convergence of the seal interface with piezoelectric actuator. An actively controlled mechanical seal was initially designed and evaluated using a mathematical model. Based on these results, a seal was fabricated and tested under laboratory conditions. The seal was tested with both helium and air, at rotational speeds up to 3770 rad/sec, and at sealed pressures as high as 1.48 x 10(exp 6) Pa. The seal was operated with both manual control and with a closed-loop control system that used either the leakage rate or face temperature as the feedback. The output of the controller was the voltage applied to the piezoelectric actuator. The seal operated successfully for both short term tests (less than one hour) and for longer term tests (four hours) with a closed-loop control system. The leakage rates were typically 5-15 slm (standard liters per minute), and the face temperatures were generally maintained below 100 C. When leakage rate was used as the feedback signal, the setpoint leakage rate was typically maintained within 1 slm. However, larger deviations occurred during sudden changes in sealed pressure. When face temperature was used as the feedback signal, the setpoint face temperature was generally maintained within 3 C, with larger deviations occurring when the sealed pressure changed suddenly.

  12. Vector control activities. Fiscal year, 1982

    SciTech Connect

    Pickard, E.; Cooney, J.C.; McDuff, B.R.

    1983-06-01

    The goal of the TVA Vector Control Program is to protect the public from potential vectors of disease by controlling medically-important arthropod pests that are propagated on TVA lands or waters. In addition, freedom from annoying mosquitoes and other blood-sucking pests permits the development, use, and full enjoyment of the vast recreational opportunities offered by the many miles of freshwater lakes. To attain this goal the program is divided into operations and support studies. The support studies are designed to improve the operational effectiveness and efficiency of the control program and to identify other vector control problems that require TVA attention and study. Specifically, activities concerning water level management of TVA lakes, dewatering projects, plant growth control, drainage and insect control programs are detailed. Further, report is made of post-impoundment surveys, soil sampling studies of Mosquite larvae and ecological mosquito management studies.

  13. Actively Controlling Buffet-Induced Excitations

    NASA Technical Reports Server (NTRS)

    Moses, Robert W.; Pototzky, Anthony S.; Henderson, Douglas A.; Galea, Stephen C.; Manokaran, Donald S.; Zimcik, David G.; Wickramasinghe, Viresh; Pitt, Dale M.; Gamble, Michael A.

    2005-01-01

    High performance aircraft, especially those with twin vertical tails, encounter unsteady buffet loads when flying at high angles of attack. These loads result in significant random stresses, which may cause fatigue damage leading to restricted capabilities and availability of the aircraft. An international collaborative research activity among Australia, Canada and the United States, conducted under the auspices of The Technical Cooperation Program (TTCP) contributed resources toward a program that coalesced a broad range of technical knowledge and expertise into a single investigation to demonstrate the enhanced performance and capability of the advanced active BLA control system in preparation for a flight test demonstration. The research team investigated the use of active structural control to alleviate the damaging structural response to these loads by applying advanced directional piezoelectric actuators, the aircraft rudder, switch mode amplifiers, and advanced control strategies on an F/A-18 aircraft empennage. Some results of the full-scale investigation are presented herein.

  14. Service-Learning General Chemistry: Lead Paint Analyses.

    ERIC Educational Resources Information Center

    Kesner, Laya; Eyring, Edward M.

    1999-01-01

    Reports on a community-service project carried out by general chemistry students at the University of Utah. Students research lead poisoning then visit neighborhood homes to teach about lead poisoning, collect exterior paint samples, and analyze them as part of a chemistry experiment. Discusses service-learning and laboratory activities. (WRM)

  15. Painting Cloud Nine: A Study of Magritte's Bottle Series.

    ERIC Educational Resources Information Center

    Turner, Dianne

    2000-01-01

    Provides background information on Rene Magritte and his work. Offers an activity in which elementary and middle school students can learn about Magritte's sky and silhouette series of painted wine bottles. Explains that the lesson should be used when students are learning about poetry in language arts classes. (CMK)

  16. A Qualitative Study of Student Responses to Body Painting

    ERIC Educational Resources Information Center

    Finn, Gabrielle M.; McLachlan, John C.

    2010-01-01

    One hundred and thirty-three preclinical medical students participated in 24 focus groups over the period 2007-2009 at Durham University. Focus groups were conducted to ascertain whether or not medical students found body painting anatomical structures to be an educationally beneficial learning activity. Data were analyzed using a grounded theory…

  17. Rolling Maneuver Load Alleviation using active controls

    NASA Technical Reports Server (NTRS)

    Woods-Vedeler, Jessica A.; Pototzky, Anthony S.

    1992-01-01

    Rolling Maneuver Load Alleviation (RMLA) has been demonstrated on the Active Flexible Wing (AFW) wind tunnel model in the NASA Langley Transonic Dynamics Tunnel. The design objective was to develop a systematic approach for developing active control laws to alleviate wing incremental loads during roll maneuvers. Using linear load models for the AFW wind-tunnel model which were based on experimental measurements, two RMLA control laws were developed based on a single-degree-of-freedom roll model. The RMLA control laws utilized actuation of outboard control surface pairs to counteract incremental loads generated during rolling maneuvers and actuation of the trailing edge inboard control surface pairs to maintain roll performance. To evaluate the RMLA control laws, roll maneuvers were performed in the wind tunnel at dynamic pressures of 150, 200, and 250 psf and Mach numbers of 0.33, .38 and .44, respectively. Loads obtained during these maneuvers were compared to baseline maneuver loads. For both RMLA controllers, the incremental torsion moments were reduced by up to 60 percent at all dynamic pressures and performance times. Results for bending moment load reductions during roll maneuvers varied. In addition, in a multiple function test, RMLA and flutter suppression system control laws were operated simultaneously during roll maneuvers at dynamic pressures 11 percent above the open-loop flutter dynamic pressure.

  18. Feedback controllers for broadband active noise reduction

    NASA Astrophysics Data System (ADS)

    Petitjean, Benoit; Legrain, Isabelle

    1994-09-01

    The aim of the present paper is to demonstrate the efficiency of an LQG-based controller for the active control of the acoustic field radiated by a rectangular panel. This topic has been of interest for numerous researchers in the past 10 or 15 years, but very little attention has been paid to broadband disturbances occurring in a relatively high frequency range. These are unfortunately common features of noise perturbations in realistic structures such as airplanes or helicopters. The few articles that deal with this problem provide very scarce experimental results and are related to frequency bands where the structure dynamics is rather poor. From the outset, the problem at hand involves numerous difficulties, such as the modeling of the active structure itself and the possible large size of the controller. In the following, the experimental setup is described, then the controller design procedure is developed and finally some experimental results are shown that prove the efficiency of the method.

  19. Texton-based analysis of paintings

    NASA Astrophysics Data System (ADS)

    van der Maaten, Laurens J. P.; Postma, Eric O.

    2010-08-01

    The visual examination of paintings is traditionally performed by skilled art historians using their eyes. Recent advances in intelligent systems may support art historians in determining the authenticity or date of creation of paintings. In this paper, we propose a technique for the examination of brushstroke structure that views the wildly overlapping brushstrokes as texture. The analysis of the painting texture is performed with the help of a texton codebook, i.e., a codebook of small prototypical textural patches. The texton codebook can be learned from a collection of paintings. Our textural analysis technique represents paintings in terms of histograms that measure the frequency by which the textons in the codebook occur in the painting (so-called texton histograms). We present experiments that show the validity and effectiveness of our technique for textural analysis on a collection of digitized high-resolution reproductions of paintings by Van Gogh and his contemporaries. As texton histograms cannot be easily be interpreted by art experts, the paper proposes to approaches to visualize the results on the textural analysis. The first approach visualizes the similarities between the histogram representations of paintings by employing a recently proposed dimensionality reduction technique, called t-SNE. We show that t-SNE reveals a clear separation of paintings created by Van Gogh and those created by other painters. In addition, the period of creation is faithfully reflected in the t-SNE visualizations. The second approach visualizes the similarities and differences between paintings by highlighting regions in a painting in which the textural structure of the painting is unusual. We illustrate the validity of this approach by means of an experiment in which we highlight regions in a painting by Monet that are not very "Van Gogh-like". Taken together, we believe the tools developed in this study are well capable of assisting for art historians in support of

  20. Active Flow Control Stator With Coanda Surface

    NASA Technical Reports Server (NTRS)

    Guendogdu; Vorreiter; Seume

    2010-01-01

    Active Flow Control increases the permissible aerodynamic loading. Curved surface near the trailing edge ("Coanda surface"): a) increases turning -> higher pressure ratio. b) controls boundary layer separation -> increased surge margin. Objective: Reduce the number of vanes or compressor stages. Constraints: 1. In a real compressor, the vane must still function entirely without blowing. 2. Maintain the flow exit angle of the reference stator despite the resulting increase in stator loading.

  1. Active Vibration Control For Lasers And Spacecraft

    NASA Astrophysics Data System (ADS)

    Pearson, Jerome

    1983-12-01

    The Active Control of Space Structures (ACOSS) program of the Defense Advanced Research Projects Agency has identified problems in active vibration control of structural modes in extremely flexible space structures and in precisely pointed optics. The Air Force Wright Aeronautical Laboratories programs are an outgrowth of the ACOSS program. They are aimed at the problems of sensors, actuators, and their dynamic interactions with the structure to be controlled, and at the problem of system identification by one-g laboratory experiments. The VCOSS-1 and VCOSS-2 programs (Vibration Control of Space Structures) address the dynamic interactions of the sensor-actuator-structure; the Benchless Laser program and the Airborne Laser Mirror-Control program address the active control of HEL mirrors; the Experimental Modal Analysis and Component Synthesis and the Large Space Structure Dynamics programs address the problems of system identification and testing. Closer coordination with NASA and DARPA is being sought in support of on-orbit dynamic testing using the Space Shuttle and in the development of a national facility for one-g dynamics testing of large space structures.

  2. Active disturbance rejection controller for chemical reactor

    SciTech Connect

    Both, Roxana; Dulf, Eva H.; Muresan, Cristina I.

    2015-03-10

    In the petrochemical industry, the synthesis of 2 ethyl-hexanol-oxo-alcohols (plasticizers alcohol) is of high importance, being achieved through hydrogenation of 2 ethyl-hexenal inside catalytic trickle bed three-phase reactors. For this type of processes the use of advanced control strategies is suitable due to their nonlinear behavior and extreme sensitivity to load changes and other disturbances. Due to the complexity of the mathematical model an approach was to use a simple linear model of the process in combination with an advanced control algorithm which takes into account the model uncertainties, the disturbances and command signal limitations like robust control. However the resulting controller is complex, involving cost effective hardware. This paper proposes a simple integer-order control scheme using a linear model of the process, based on active disturbance rejection method. By treating the model dynamics as a common disturbance and actively rejecting it, active disturbance rejection control (ADRC) can achieve the desired response. Simulation results are provided to demonstrate the effectiveness of the proposed method.

  3. Active Control of Cryogenic Propellants in Space

    NASA Technical Reports Server (NTRS)

    Notardonato, William

    2011-01-01

    A new era of space exploration is being planned. Exploration architectures under consideration require the long term storage of cryogenic propellants in space. This requires development of active control systems to mitigate the effect of heat leak. This work summarizes current state of the art, proposes operational design strategies and presents options for future architectures. Scaling and integration of active systems will be estimated. Ideal long range spacecraft systems will be proposed with Exploration architecture benefits considered.

  4. An evaluation of two flat-black silicone paints for space application

    NASA Technical Reports Server (NTRS)

    Clatterbuck, Carroll H.; Scialdone, John J.

    1990-01-01

    Tests were conducted on two flat-black silicone paints suggested for space applications to determine their optical, electrical, and mechanical properties. Three different types of substrate materials were chosen for these paint tests; the application of the paints onto the primed substrates was carried out by spray coating. The adhesion properties were verified by thermal shock and sudden immersion into liquid nitrogen. A controlled thermal vacuum tests was also carried out by varying the temperature of the paint from -100 to 225 C. The measured optical properties included normal and hemispherical emittance, and solar absorption/reflectance. A simultaneous exposure to low-energy proton/UV irradiation in vacuum, and high-energy proton/electron irradiation was carried out. Additional tests of the paints are described.

  5. Seismic active control by neural networks.

    SciTech Connect

    Tang, Y.

    1998-01-01

    A study on the application of artificial neural networks (ANNs) to activate structural control under seismic loads is carried out. The structure considered is a single-degree-of-freedom (SDF) system with an active bracing device. The control force is computed by a trained neural network. The feed-forward neural network architecture and an adaptive back-propagation training algorithm is used in the study. The neural net is trained to reproduce the function that represents the response-excitation relationship of the SDF system under seismic loads. The input-output training patterns are generated randomly. In the back-propagation training algorithm, the learning rate is determined by ensuring the decrease of the error function at each epoch. The computer program implemented is validated by solving the classification of the XOR problem. Then, the trained ANN is used to compute the control force according to the control strategy. If the control force exceeds the actuator's capacity limit, it is set equal to that limit. The concept of the control strategy employed herein is to apply the control force at every time step to cancel the system velocity induced at the preceding time step so that the gradual rhythmic buildup of the response is destroyed. The ground motions considered in the numerical example are the 1940 El Centro earthquake and the 1979 Imperial Valley earthquake in California. The system responses with and without the control are calculated and compared. The feasibility and potential of applying ANNs to seismic active control is asserted by the promising results obtained from the numerical examples studied.

  6. Seismic active control by neutral networks

    SciTech Connect

    Tang, Yu

    1995-12-31

    A study on the application of artificial neural networks (ANNs) to active structural control under seismic loads is carried out. The structure considered is a single-degree-of-freedom (SDF) system with an active bracing device. The control force is computed by a trained neural network. The feedforward neural network architecture and an adaptive backpropagation training algorithm is used in the study. The neural net is trained to reproduce the function that represents the response-excitation relationship of the SDF system under seismic loads. The input-output training patterns are generated randomly. In the backpropagation training algorithm, the learning rate is determined by ensuring the decrease of the error function at each epoch. The computer program implemented is validated by solving the classification of the XOR problem. Then, the trained ANN is used to compute the control force according to the control strategy. If the control force exceeds the actuator`s capacity limit, it is set equal to that limit. The concept of the control strategy employed herein is to apply the control force at every time step to cancel the system velocity induced at the preceding time step so that the gradual rhythmic buildup of the response is destroyed. The ground motions considered in the numerical example are the 1940 El Centro earthquake and the 1979 Imperial Valley earthquake in California. The system responses with and without the control are calculated and compared. The feasibility and potential of applying ANNs to seismic active control is asserted by the promising results obtained from the numerical examples studied.

  7. Rolling maneuver load alleviation using active controls

    NASA Technical Reports Server (NTRS)

    Woods-Vedeler, Jessica A.; Pototzky, Anthony S.

    1992-01-01

    Rolling Maneuver Load Alleviation (RMLA) was demonstrated on the Active Flexible Wing (AFW) wind tunnel model in the LaRC Transonic Dynamics Tunnel. The design objective was to develop a systematic approach for developing active control laws to alleviate wing incremental loads during roll maneuvers. Using linear load models for the AFW wind-tunnel model which were based on experimental measurements, two RMLA control laws were developed based on a single-degree-of-freedom roll model. The RMLA control laws utilized actuation of outboard control surface pairs to counteract incremental loads generated during rolling maneuvers and roll performance. To evaluate the RMLA control laws, roll maneuvers were performed in the wind tunnel at dynamic pressures of 150, 200, and 250 psf and Mach numbers of .33, .38, and .44, respectively. Loads obtained during these maneuvers were compared to baseline maneuver loads. For both RMLA controllers, the incremental torsion moments were reduced by up to 60 percent at all dynamic pressures and performance times. Results for bending moment load reductions during roll maneuvers varied. In addition, in a multiple function test, RMLA and flutter suppression system control laws were operated simultaneously during roll maneuvers at dynamic pressures 11 percent above the open-loop flutter dynamic pressure.

  8. Dielectric elastomers for active vibration control applications

    NASA Astrophysics Data System (ADS)

    Herold, S.; Kaal, W.; Melz, T.

    2011-04-01

    Dielectric elastomers (DE) have proved to have high potential for smart actuator applications in many laboratory setups and also in first commercially available components. Because of their large deformation capability and the inherent fast response to external stimulation they proffer themselves to applications in the field of active vibration control, especially for lightweight structures. These structures typically tend to vibrate with large amplitudes even at low excitation forces. Here, DE actuators seem to be ideal components for setting up control loops to suppress unwanted vibrations. Due to the underlying physical effect DE actuators are generally non-linear elements with an approximately quadratic relationship between in- and output. Consequently, they automatically produce higher-order frequencies. This can cause harmful effects for vibration control on structures with high modal density. Therefore, a linearization technique is required to minimize parasitic effects. This paper shows and quantifies the nonlinearity of a commercial DE actuator and demonstrates the negative effects it can have in technical applications. For this purpose, two linearization methods are developed. Subsequently, the actuator is used to implement active vibration control for two different mechanical systems. In the first case a concentrated mass is driven with the controlled actuator resulting in a tunable oscillator. In the second case a more complex mechanical structure with multiple resonances is used. Different control approaches are applied likewise and their impact on the whole system is demonstrated. Thus, the potential of DE actuators for vibration control applications is highlighted.

  9. Piezoelectric Power Requirements for Active Vibration Control

    NASA Technical Reports Server (NTRS)

    Brennan, Matthew C.; McGowan, Anna-Maria Rivas

    1997-01-01

    This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate that for a perfectly-controlled system, the power consumption is a function of the quantity and type of piezoelectric actuators and the voltage and frequency of the control law output signal. Furthermore, as control effectiveness decreases, the power consumption of the piezoelectric actuators decreases. In addition, experimental results revealed a non-linear behavior in the material properties of piezoelectric actuators. The material non- linearity displayed a significant increase in capacitance with an increase in excitation voltage. Tests show that if the non-linearity of the capacitance was accounted for, a conservative estimate of the power can easily be determined.

  10. A Dynamic Absorber With Active Vibration Control

    NASA Astrophysics Data System (ADS)

    Huang, S.-J.; Lian, R.-J.

    1994-12-01

    The design and construction of a dynamic absorber incorporating active vibration control is described. The absorber is a two-degrees-of-freedom spring — lumped mass system sliding on a guide pillar, with two internal vibration disturbance sources. Both the main mass and the secondary absorber mass are acted on by DC servo motors, respectively, to suppress the vibration amplitude. The state variable technique is used to model this dynamic system and a decoupling PID control method is used. First, the discrete time state space model is identified by using the commercial software MATLAB. Then the decoupling controller of this multi-input/multi-output system is derived from the identified model. Finally the results of some experiments are presented. The experimental results show that the system is effective in suppressing vibration. Also, the performance of this control strategy for position tracking control is evaluated based on experimental data.

  11. Affinity states of biocides determine bioavailability and release rates in marine paints.

    PubMed

    Dahlström, Mia; Sjögren, Martin; Jonsson, Per R; Göransson, Ulf; Lindh, Liselott; Arnebrant, Thomas; Pinori, Emiliano; Elwing, Hans; Berglin, Mattias

    2015-01-01

    A challenge for the next generation marine antifouling (AF) paints is to deliver minimum amounts of biocides to the environment. The candidate AF compound medetomidine is here shown to be released at very low concentrations, ie ng ml(-1) day(-1). Moreover, the release rate of medetomidine differs substantially depending on the formulation of the paint, while inhibition of barnacle settlement is independent of release to the ambient water, ie the paint with the lowest release rate was the most effective in impeding barnacle colonisation. This highlights the critical role of chemical interactions between biocide, paint carrier and the solid/aqueous interface for release rate and AF performance. The results are discussed in the light of differential affinity states of the biocide, predicting AF activity in terms of a high surface affinity and preserved bioavailability. This may offer a general framework for the design of low-release paint systems using biocides for protection against biofouling on marine surfaces. PMID:25775096

  12. Neural predictive control for active buffet alleviation

    NASA Astrophysics Data System (ADS)

    Pado, Lawrence E.; Lichtenwalner, Peter F.; Liguore, Salvatore L.; Drouin, Donald

    1998-06-01

    The adaptive neural control of aeroelastic response (ANCAR) and the affordable loads and dynamics independent research and development (IRAD) programs at the Boeing Company jointly examined using neural network based active control technology for alleviating undesirable vibration and aeroelastic response in a scale model aircraft vertical tail. The potential benefits of adaptive control includes reducing aeroelastic response associated with buffet and atmospheric turbulence, increasing flutter margins, and reducing response associated with nonlinear phenomenon like limit cycle oscillations. By reducing vibration levels and thus loads, aircraft structures can have lower acquisition cost, reduced maintenance, and extended lifetimes. Wind tunnel tests were undertaken on a rigid 15% scale aircraft in Boeing's mini-speed wind tunnel, which is used for testing at very low air speeds up to 80 mph. The model included a dynamically scaled flexible fail consisting of an aluminum spar with balsa wood cross sections with a hydraulically powered rudder. Neural predictive control was used to actuate the vertical tail rudder in response to strain gauge feedback to alleviate buffeting effects. First mode RMS strain reduction of 50% was achieved. The neural predictive control system was developed and implemented by the Boeing Company to provide an intelligent, adaptive control architecture for smart structures applications with automated synthesis, self-optimization, real-time adaptation, nonlinear control, and fault tolerance capabilities. It is designed to solve complex control problems though a process of automated synthesis, eliminating costly control design and surpassing it in many instances by accounting for real world non-linearities.

  13. Actively Controlled Shaft Seals for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Salant, Richard F.; Wolff, Paul

    1995-01-01

    This study experimentally investigates an actively controlled mechanical seal for aerospace applications. The seal of interest is a gas seal, which is considerably more compact than previous actively controlled mechanical seals that were developed for industrial use. In a mechanical seal, the radial convergence of the seal interface has a primary effect on the film thickness. Active control of the film thickness is established by controlling the radial convergence of the seal interface with a piezoelectric actuator. An actively controlled mechanical seal was initially designed and evaluated using a mathematical model. Based on these results, a seal was fabricated and tested under laboratory conditions. The seal was tested with both helium and air, at rotational speeds up to 3770 rad/sec, and at sealed pressures as high as 1.48 x 10(exp 6) Pa. The seal was operated with both manual control and with a closed-loop control system that used either the leakage rate or face temperature as the feedback. The output of the controller was the voltage applied to the piezoelectric actuator. The seal operated successfully for both short term tests (less than one hour) and for longer term tests (four hours) with a closed-loop control system. The leakage rates were typically 5-15 slm (standard liters per minute), and the face temperatures were generally maintained below 100C. When leakage rate was used as the feedback signal, the setpoint leakage rate was typically maintained within 1 slm. However, larger deviations occurred during sudden changes in sealed pressure. When face temperature was used as the feedback signal, the setpoint face temperature was generally maintained within 3 C, with larger deviations occurring when the sealed pressure changes suddenly. the experimental results were compared to the predictions from the mathematical model. The model was successful in predicting the trends in leakage rate that occurred as the balance ratio and sealed pressure changed

  14. Occupational Exposure to Organic Solvents during Bridge Painting

    PubMed Central

    Qian, Hua; Fiedler, Nancy; Moore, Dirk F.; Weisel, Clifford P.

    2010-01-01

    Exposure to volatile organic compounds (VOCs) from bridge painting was measured in New York City and New Jersey during the summer and fall seasons from 2005 to 2007. The effect of painting activities (paint coating layer, confinement setup, and application method) and meteorological conditions (temperature, humidity, and wind speed) on solvent exposure to aromatic, ketone, ester, and alkane compounds were individually evaluated. Mixed-effect models were used to examine the combination effects of these factors on the air concentration of total VOCs as the individual compound groups were not present in all samples. Air concentration associated with spraying was not affected by meteorological conditions since spraying was done in a confined space, thus reducing their impact on solvent air concentration. The mixed models for brushing and rolling samples included two fixed factors, i.e. application method and temperature, and one random factor, i.e. sampling day. An independent dataset (daily air samples) was used to validate the mixed model constructed for brushing and rolling samples. The regression line of the predicted values and actual measurements had a slope of 1.32 ± 0.15 for daily brushing and rolling samples, with almost all points being within the 95% confidence bands. The constructed model provides practical approaches for estimating the solvent exposure from brushing and rolling activities among construction painters. An adjusted mean air concentration derived from the activity-specific spray samples was the best estimate for that painting application. PMID:20354053

  15. Dielectric elastomer actuators for active microfluidic control

    NASA Astrophysics Data System (ADS)

    McCoul, David; Murray, Coleman; Di Carlo, Dino; Pei, Qibing

    2013-04-01

    Dielectric elastomers with low modulus and large actuation strain have been investigated for applications in which they serve as "active" microfluidic channel walls. Anisotropically prestrained acrylic elastomer membranes are bonded to cover open trenches formed on a silicone elastomer substrate. Actuation of the elastomer membranes increases the cross-sectional area of the resulting channels, in turn controlling hydraulic flow rate and pressure. Bias voltage increases the active area of the membranes, allowing intrachannel pressure to alter channel geometry. The channels have also demonstrated the ability to actively clear a blockage. Applications may include adaptive microfilters, micro-peristaltic pumps, and reduced-complexity lab-on-a-chip devices.

  16. An evaluation of the effectiveness of lead paint hazard reduction when conducted by homeowners and landlords

    SciTech Connect

    Etre, L.A.; Reynolds, S.J.; Burmeister, L.F.; Whitten, P.S.; Gergely, R.

    1999-08-01

    This research project was conducted in collaboration with the Iowa Department of Public Health to evaluate whether property owners who follow recommended procedures for lead-based paint removal/repair can do the work safely and effectively. This study included 29 homes where a lead-based paint hazard had been identified and lead-based paint was removed or repaired (hazard reduction). Exposure evaluation included pre-project surface dust wipe sampling, air monitoring during lead-based paint removal, post-project surface dust wipe sampling, and pre- and post-project blood samples from adult study participants. The comparison of surface dust wipe samples taken before and after lead paint hazard reduction was used to evaluate the effectiveness of lead paint hazard reduction. The lead loadings on window sill surfaces in the work area were significantly lower after completion of the project, and the lead-based paint removal did not contaminate the adjoining living area. The proportion of homes with surface dust lead loading exceeding Department of Housing and Urban Development (HUD) clearance standard was 73% pre-project and 38% post-project. Personal airborne exposures during lead removal activities reinforce the need to respiratory protection and good hygiene. There was no difference in adult pre-/post-blood levels, indicating that participants die remove lead in a safe manner with respect to their own exposures. The results indicate that hazard reduction can be done effectively when recommended procedures for the removal of lead-based paint are followed.

  17. Lead-based paint assessment

    SciTech Connect

    Lorie, C.; Cowdery, J.W.

    1994-12-31

    In 1977, The US consumer product safety commission banned the use of lead-based paint (LBP) in all industries, except the maritime industry which still has certain privileged uses. Unfortunately for property and building owners, the ban did not come soon enough. In response to this heightened awareness, several environmental market sectors addressing the issues have emerged. These include: residential; soil; commercial; water; and structures. The first and most important step in addressing the concerns posed by the existence of lead based contamination is to quantify the amount of lead-based product, to determine the location of the lead based product and the extent, if any, of lead based contamination, and to make recommendations for the remediation or abatement of the lead product and resultant contamination. In narrowing the focus of these issues, this paper discusses lead-based paint assessment; preparing and organizing the assessment, the regulatory considerations, assessment methodology, and presentation of results.

  18. Cellular Mechanisms Controlling Caspase Activation and Function

    PubMed Central

    Parrish, Amanda B.; Freel, Christopher D.; Kornbluth, Sally

    2013-01-01

    Caspases are the primary drivers of apoptotic cell death, cleaving cellular proteins that are critical for dismantling the dying cell. Initially translated as inactive zymogenic precursors, caspases are activated in response to a variety of cell death stimuli. In addition to factors required for their direct activation (e.g., dimerizing adaptor proteins in the case of initiator caspases that lie at the apex of apoptotic signaling cascades), caspases are regulated by a variety of cellular factors in a myriad of physiological and pathological settings. For example, caspases may be modified posttranslationally (e.g., by phosphorylation or ubiquitylation) or through interaction of modulatory factors with either the zymogenic or active form of a caspase, altering its activation and/or activity. These regulatory events may inhibit or enhance enzymatic activity or may affect activity toward particular cellular substrates. Finally, there is emerging literature to suggest that caspases can participate in a variety of cellular processes unrelated to apoptotic cell death. In these settings, it is particularly important that caspases are maintained under stringent control to avoid inadvertent cell death. It is likely that continued examination of these processes will reveal new mechanisms of caspase regulation with implications well beyond control of apoptotic cell death. PMID:23732469

  19. American Folk Art Paintings

    ERIC Educational Resources Information Center

    Lang, April Hulse

    2007-01-01

    Anna Mary Robertson Moses, popularly known as Grandma Moses, may be the most famous American folk artist. A fortuitous combination of original vision, innate talent, spunky character, and long life, Moses is known for her landscapes that depict nostalgic views of country life. In this article, the author describes an art activity she introduced to…

  20. Paint Bucket Polygons

    ERIC Educational Resources Information Center

    Edwards, Michael Todd; Harper, Suzanne R.

    2010-01-01

    During a two-week summer professional development workshop, teams of intermediate-level school teachers and college methods instructors crafted mathematics learning modules--activities, lesson plans, work sheets, and technology-oriented tasks--with the primary goal of strengthening students' understanding of various geometric concepts. They recast…

  1. MODELING MERCURY CONTROL WITH POWDERED ACTIVATED CARBON

    EPA Science Inventory

    The paper presents a mathematical model of total mercury removed from the flue gas at coal-fired plants equipped with powdered activated carbon (PAC) injection for Mercury control. The developed algorithms account for mercury removal by both existing equipment and an added PAC in...

  2. Active controls technology to maximize structural efficiency

    NASA Technical Reports Server (NTRS)

    Hoy, J. M.; Arnold, J. M.

    1978-01-01

    The implication of the dependence on active controls technology during the design phase of transport structures is considered. Critical loading conditions are discussed along with probable ways of alleviating these loads. Why fatigue requirements may be critical and can only be partially alleviated is explained. The significance of certain flutter suppression system criteria is examined.

  3. Spacecraft active thermal control technology status

    NASA Technical Reports Server (NTRS)

    Ellis, W. E.

    1978-01-01

    Four advanced space radiator concepts that were pursued in an integrated effort to develop multi-mission-use and low cost heat rejection systems which can overcome the limitations of current radiator systems are briefly discussed and described. Also, in order to establish a firm background to compare the advanced space radiator concepts, the Orbiter active thermal control system is also briefly described.

  4. DNA-based control of protein activity

    PubMed Central

    Engelen, W.; Janssen, B. M. G.

    2016-01-01

    DNA has emerged as a highly versatile construction material for nanometer-sized structures and sophisticated molecular machines and circuits. The successful application of nucleic acid based systems greatly relies on their ability to autonomously sense and act on their environment. In this feature article, the development of DNA-based strategies to dynamically control protein activity via oligonucleotide triggers is discussed. Depending on the desired application, protein activity can be controlled by directly conjugating them to an oligonucleotide handle, or expressing them as a fusion protein with DNA binding motifs. To control proteins without modifying them chemically or genetically, multivalent ligands and aptamers that reversibly inhibit their function provide valuable tools to regulate proteins in a noncovalent manner. The goal of this feature article is to give an overview of strategies developed to control protein activity via oligonucleotide-based triggers, as well as hurdles yet to be taken to obtain fully autonomous systems that interrogate, process and act on their environments by means of DNA-based protein control. PMID:26812623

  5. DNA-based control of protein activity.

    PubMed

    Engelen, W; Janssen, B M G; Merkx, M

    2016-03-01

    DNA has emerged as a highly versatile construction material for nanometer-sized structures and sophisticated molecular machines and circuits. The successful application of nucleic acid based systems greatly relies on their ability to autonomously sense and act on their environment. In this feature article, the development of DNA-based strategies to dynamically control protein activity via oligonucleotide triggers is discussed. Depending on the desired application, protein activity can be controlled by directly conjugating them to an oligonucleotide handle, or expressing them as a fusion protein with DNA binding motifs. To control proteins without modifying them chemically or genetically, multivalent ligands and aptamers that reversibly inhibit their function provide valuable tools to regulate proteins in a noncovalent manner. The goal of this feature article is to give an overview of strategies developed to control protein activity via oligonucleotide-based triggers, as well as hurdles yet to be taken to obtain fully autonomous systems that interrogate, process and act on their environments by means of DNA-based protein control. PMID:26812623

  6. Using Temperature Sensitive Paint Technology

    NASA Technical Reports Server (NTRS)

    Hamner, M. P.; Popernack, T. G., Jr.; Owens, L. R.; Wahls, R. A.

    2002-01-01

    New facilities and test techniques afford research aerodynamicists many opportunities to investigate complex aerodynamic phenomena. For example, NASA Langley Research Center's National Transonic Facility (NTF) can hold Mach number, Reynolds number, dynamic pressure, stagnation temperature and stagnation pressure constant during testing. This is important because the wing twist associated with model construction may mask important Reynolds number effects associated with the flight vehicle. Beyond this, the NTF's ability to vary Reynolds number allows for important research into the study of boundary layer transition. The capabilities of facilities such as the NTF coupled with test techniques such as temperature sensitive paint yield data that can be applied not only to vehicle design but also to validation of computational methods. Development of Luminescent Paint Technology for acquiring pressure and temperature measurements began in the mid-1980s. While pressure sensitive luminescent paints (PSP) were being developed to acquire data for aerodynamic performance and loads, temperature sensitive luminescent paints (TSP) have been used for a much broader range of applications. For example, TSP has been used to acquire surface temperature data to determine the heating due to rotating parts in various types of mechanical systems. It has been used to determine the heating pattern(s) on circuit boards. And, it has been used in boundary layer analysis and applied to the validation of full-scale flight performance predictions. That is, data acquired on the same model can be used to develop trends from off design to full scale flight Reynolds number, e.g. to show the progression of boundary layer transition. A discussion of issues related to successfully setting-up TSP tests and using TSP systems for boundary layer studies is included in this paper, as well as results from a variety of TSP tests. TSP images included in this paper are all grey-scale so that similar to

  7. Active control of vibration transmission through struts

    NASA Astrophysics Data System (ADS)

    Pelinescu, Ion; Balachandran, Balakumar

    1998-07-01

    In this work, analytical investigations into active control of longitudinal and flexural vibrations transmitted through a cylindrical strut are conducted. A mechanics based model for a strut fitted with a piezoelectric actuator is developed. For harmonic disturbances, a linear dynamic formulation describing the motion of the actuator is integrated with the formulation describing wave transmission through the strut, and the resulting system is studied in the frequency domain. Open-loop studies are conducted with the aid of numerical simulations, and the potential of active control schemes to attenuate the transmitted vibrations over the frequency range of 10 Hz to 6000 Hz is examined. The relevance of the current work to control of helicopter cabin interior noise is also discussed.

  8. [Burns caused by paint thinner].

    PubMed

    Benbrahim, A; Jerrah, H; Diouri, M; Bahechar, N; Boukind, E H

    2009-12-31

    Flame deriving from paint thinner is not a rare cause of burns in Morocco and we thus considered it useful to conduct an epidemiological survey of paint thinner flame burns (PTFB) in the National Burns Centre (NBC) in the Ibn-Rochd University Hospital Centre in Casablanca, Morocco. The research covered the 10-month period from September 2007 to June 2008.The aim of our work was to present the characteristic features of such burns in order to prevent them by increasing public knowledge regarding the risks involved in using paint thinner, i.e. burns in particular. During the period in question, we colligated 17 cases of PTFB out of a total number of 356 patients admitted to the NBC for acute burns of all aetiologies. The patients' average was 32 yr and they were nearly all male (16 men/1 woman), with past histories of drug addiction and/or delinquency. They were all of low-level socioeconomic class and lived mainly in shanty towns. The burn was often secondary to street violence (92% of the cases).The mean burn surface area was 23% and the burns were often deep and located mainly in the upper limbs and the trunk. PMID:21991179

  9. Active control of transmitted sound in buildings

    NASA Astrophysics Data System (ADS)

    Thompsett, Russell Harvey George

    The problem of noise from neighbours has increased dramatically over the last few years. Many of the noise complaints are due to the high level, low frequency noise from modern stereo equipment, and are often described in terms of the low frequency characteristics of the music; the repetitive, booming, bass beat. The objective of this research was to establish the feasibility of applying active noise control to alleviate this problem. The initial approach was to evaluate the possibility of exploiting the dominance of individual modes in the response of rooms at low frequency to effect global control. However, initial investigations using a modal model of the sound field revealed that this would be difficult due to the contribution of many acoustic modes excited off resonance. This conclusion was supported by measurements of acoustic room responses in typical buildings, illustrating a non-resonant characteristic. Consequently, attention was turned to the feasibility of using local active control systems to create zones of quiet by concentrating control at a specific location near the observers ears, for example in a seat headrest, or near the pillows of a bed. The lack of a reference signal in either approach requires the use of a feedback control strategy. With a typically non-resonant system, the predictability in the disturbance necessary for successful feedback control must be contained in the primary excitation, namely the music. Examples of different music styles were investigated and of those with the potential to be a nuisance surprisingly few were significantly more predictable than a random disturbance. As expected the most encouraging control performance simulations were found for modern dance music, with a strong repetitive beat. A real-time, local controller was demonstrated in the laboratory with such a disturbance signal and the properties of the quiet zone were measured. The subjective response when hearing the controller in operation was found to be

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: PAINT OVERSPRAY ARRESTOR, COLUMBUS INDUSTRIES SL-46B

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  11. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: PAINT OVERSPRAY ARRESTOR, ATI OSM 200 SYSTEM

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  12. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: PAINT OVERSPRAY ARRESTOR, FARR COMPANY RIGA-FLO 200

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  13. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: PAINT OVERSPRAY ARRESTOR, AAF INTERNATIONAL DRI-PAK 40-45%

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, PAINT OVERSPRAY ARRESTOR, KOCH FILTER CORPORATION, DUO-PAK 650

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  15. Controlling Contagion Processes in Activity Driven Networks

    NASA Astrophysics Data System (ADS)

    Liu, Suyu; Perra, Nicola; Karsai, Márton; Vespignani, Alessandro

    2014-03-01

    The vast majority of strategies aimed at controlling contagion processes on networks consider the connectivity pattern of the system either quenched or annealed. However, in the real world, many networks are highly dynamical and evolve, in time, concurrently with the contagion process. Here, we derive an analytical framework for the study of control strategies specifically devised for a class of time-varying networks, namely activity-driven networks. We develop a block variable mean-field approach that allows the derivation of the equations describing the coevolution of the contagion process and the network dynamic. We derive the critical immunization threshold and assess the effectiveness of three different control strategies. Finally, we validate the theoretical picture by simulating numerically the spreading process and control strategies in both synthetic networks and a large-scale, real-world, mobile telephone call data set.

  16. Control Systems Cyber Security Standards Support Activities

    SciTech Connect

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  17. Actively controlled vibration welding system and method

    SciTech Connect

    Cai, Wayne W.; Kang, Bongsu; Tan, Chin-An

    2013-04-02

    A vibration welding system includes a controller, welding horn, an active material element, and anvil assembly. The assembly may include an anvil body connected to a back plate and support member. The element, e.g., a piezoelectric stack or shape memory alloy, is positioned with respect to the assembly. The horn vibrates in a desirable first direction to form a weld on a work piece. The element controls any vibrations in a second direction by applying calibrated response to the anvil body in the second direction. A method for controlling undesirable vibrations in the system includes positioning the element with respect to the anvil assembly, connecting the anvil body to the support member through the back plate, vibrating the horn in a desirable first direction, and transmitting an input signal to the element to control vibration in an undesirable second direction.

  18. Optogenetic feedback control of neural activity

    PubMed Central

    Newman, Jonathan P; Fong, Ming-fai; Millard, Daniel C; Whitmire, Clarissa J; Stanley, Garrett B; Potter, Steve M

    2015-01-01

    Optogenetic techniques enable precise excitation and inhibition of firing in specified neuronal populations and artifact-free recording of firing activity. Several studies have suggested that optical stimulation provides the precision and dynamic range requisite for closed-loop neuronal control, but no approach yet permits feedback control of neuronal firing. Here we present the ‘optoclamp’, a feedback control technology that provides continuous, real-time adjustments of bidirectional optical stimulation in order to lock spiking activity at specified targets over timescales ranging from seconds to days. We demonstrate how this system can be used to decouple neuronal firing levels from ongoing changes in network excitability due to multi-hour periods of glutamatergic or GABAergic neurotransmission blockade in vitro as well as impinging vibrissal sensory drive in vivo. This technology enables continuous, precise optical control of firing in neuronal populations in order to disentangle causally related variables of circuit activation in a physiologically and ethologically relevant manner. DOI: http://dx.doi.org/10.7554/eLife.07192.001 PMID:26140329

  19. Vibrating surface actuators for active flow control

    NASA Astrophysics Data System (ADS)

    Calkins, Frederick T.; Clingman, Dan J.

    2002-07-01

    Current research has shown that aircraft can gain significant aerodynamic performance benefits from active flow control (AFC). AFC seeks to control large scale flows by exploiting natural response triggered by small energy inputs. The principal target application is download alleviation of the V-22 Osprey under the DARPA sponsored Boeing Active Flow Control System program. One method of injecting energy into the flow over the V22 wings is to use an active vibrating surface on the passive seal between the wing and flapperon. The active surface is an oscillating cantilevered beam which injects fluid into the flow, similar to a synthetic jet, and interacts with the flow field. Two types of actuators, or flipperons, are explored. The first is a multilayer piezoelectric polyvinylidene fluoride cantilevered bender. The second is a single crystal piezoelectric (SCP)d31 poled wafer mounted on a cantilevered spring steel substrate. This paper details the development effort including fabrication, mechanical and electrical testing, and modeling for both types of actuators. Both flipperons were mounted on the passive seal between a 1/10th scale V22 wing and flapperon and the aerodynamic performance evaluated in low speed wind tunnel. The SCP flipperon demonstrated significant cruise benefits, with increase of 10 percent lift and 20 percent angle of attack capability. The PVDF flipperon provided a 16 percent drag reduction in the hover mode.

  20. Market-based control of active surfaces

    NASA Astrophysics Data System (ADS)

    Berlin, Andrew A.; Hogg, Tad; Jackson, Warren B.

    1998-12-01

    This paper describes a market-based approach to controlling a smart matter-based object transport system, in which an array of distributed air jets applies forces to levitate and control the motion of a planar object. In the smart matter regime, the effects of spatial and temporal variation of operating parameters among a multiplicity of sensor, actuators, and controllers make it desirable for a control strategy to exhibit a minimal dependence on system models, and to be able to arbitrate among conflicting goals. A market-based strategy is introduced that aggregates the control requirements of multiple relatively simple local controllers, each of which seeks to optimize the performance of the system within a limited spatial and temporal range. These local controllers act as the market's consumers, and two sets of distributed air jets act as the producers. Experiments are performed comparing the performance of the market-based strategy to a near-optimal model-derived benchmark, as well as to a hand-tuned PD controller. Results indicate that even though the local controllers in the market are not based on a detailed model of the system dynamics, the market is able to effectively approximate the performance of the model-based benchmark. In certain specialized cases, such as tracking a step trajectory, the performance of the market surpasses the performance of the model-based benchmark by balancing the needs of conflicting control goals. A brief overview of the active surface smart matter prototype being developed at Xerox PARC that is the motivation behind this work is also presented.

  1. Ejecta production mechanisms on painted surfaces

    NASA Astrophysics Data System (ADS)

    Bariteau, Muriel; Mandeville, Jean-Claude; Schäfer, Frank

    2001-10-01

    Painted surfaces are frequently used on space vehicles, whether on satellites or on rocket bodies. A bibliographic research allows us to evaluate the painted surfaces in orbit at about 63000 m2. The observation of impacts on painted surfaces of the LDEF satellite shows that the total ejected mass is large. However, no description of hypervelocity impact tests on painted surfaces has been found in the literature. An ejecta model has been previously developed at ONERA/DESP. This model is applicable for hypervelocity impacts on homogeneous ductile targets, homogeneous brittle targets and solar cells. The objective of this work is to extend this model to the case of painted surfaces. Consequently, impact pictures on painted surfaces of LDEF were analysed and some laboratory impact tests were performed at the Ernst-Mach-Institut, in Freiburg, under an ESA contract.

  2. 24 CFR 3280.814 - Painting of wiring.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Painting of wiring. 3280.814... Painting of wiring. During painting or staining of the manufactured home, it shall be permitted to paint... cable. Some arrangement, however, shall be made so that no paint shall be applied to the...

  3. 24 CFR 3280.814 - Painting of wiring.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Painting of wiring. 3280.814... Painting of wiring. During painting or staining of the manufactured home, it shall be permitted to paint... cable. Some arrangement, however, shall be made so that no paint shall be applied to the...

  4. 24 CFR 3280.814 - Painting of wiring.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Painting of wiring. 3280.814... Painting of wiring. During painting or staining of the manufactured home, it shall be permitted to paint... cable. Some arrangement, however, shall be made so that no paint shall be applied to the...

  5. 24 CFR 3280.814 - Painting of wiring.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Painting of wiring. 3280.814... Painting of wiring. During painting or staining of the manufactured home, it shall be permitted to paint... cable. Some arrangement, however, shall be made so that no paint shall be applied to the...

  6. 24 CFR 3280.814 - Painting of wiring.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Painting of wiring. 3280.814... Painting of wiring. During painting or staining of the manufactured home, it shall be permitted to paint... cable. Some arrangement, however, shall be made so that no paint shall be applied to the...

  7. Hybrid dampers for active vibration control

    SciTech Connect

    Gordaninejad, F.; Ray, A.

    1994-12-31

    In the present investigation feasibility of using hybrid electrorheological (ER) fluid dampers for active vibration control is examined. Small-scale, three-electrode hybrid dampers were designed and built such that they have two separate compartments to contain a viscous oil and an ER fluid. The results were compared to those obtained using a three-electrode ER fluid damper. It was shown that the use of hybrid ER fluid damper can enhance the damping. It was also found that the bang-bang and linear proportional control algorithms have similar effects on the amplitude-time response obtained from hybrid and ER fluid dampers.

  8. Distributed Energy Communications & Controls, Lab Activities - Summary

    SciTech Connect

    Rizy, D Tom

    2010-01-01

    The purpose is to develop controls for inverter-based renewable and non-renewable distributed energy systems to provide local voltage, power and power quality support for loads and the power grid. The objectives are to (1) develop adaptive controls for inverter-based distributed energy (DE) systems when there are multiple inverters on the same feeder and (2) determine the impact of high penetration high seasonal energy efficiency ratio (SEER) air conditioning (A/C) units on power systems during sub-transmission faults which can result in an A/C compressor motor stall and assess how inverter-based DE can help to mitigate the stall event. The Distributed Energy Communications & Controls Laboratory (DECC) is a unique facility for studying dynamic voltage, active power (P), non-active power (Q) and power factor control from inverter-based renewable distributed energy (DE) resources. Conventionally, inverter-based DE systems have been designed to provide constant, close to unity power factor and thus not provide any voltage support. The DECC Lab interfaces with the ORNL campus distribution system to provide actual power system testing of the controls approach. Using mathematical software tools and the DECC Lab environment, we are developing and testing local, autonomous and adaptive controls for local voltage control and P & Q control for inverter-based DE. We successfully tested our active and non-active power (P,Q) controls at the DECC laboratory along with voltage regulation controls. The new PQ control along with current limiter controls has been tested on our existing inverter test system. We have tested both non-adaptive and adaptive control modes for the PQ control. We have completed several technical papers on the approaches and results. Electric power distribution systems are experiencing outages due to a phenomenon known as fault induced delayed voltage recovery (FIDVR) due to air conditioning (A/C) compressor motor stall. Local voltage collapse from FIDVR is

  9. Toxicity of nanoparticles embedded in paints compared to pristine nanoparticles, in vitro study.

    PubMed

    Smulders, Stijn; Luyts, Katrien; Brabants, Gert; Golanski, Luana; Martens, Johan; Vanoirbeek, Jeroen; Hoet, Peter H M

    2015-01-22

    The unique physicochemical properties of nanomaterials has led to an increased use in the paint and coating industry. In this study, the in vitro toxicity of three pristine ENPs (TiO2, Ag and SiO₂), three aged paints containing ENPs (TiO₂, Ag and SiO₂) and control paints without ENPs were compared. In a first experiment, cytotoxicity was assessed using a biculture consisting of human bronchial epithelial (16HBE14o-) cells and human monocytic cells (THP-1) to determine subtoxic concentrations. In a second experiment, a new coculture model of the lung-blood barrier consisting of 16HBE14o- cells, THP-1 and human lung microvascular endothelial cells (HLMVEC) was used to study pulmonary and extrapulmonary toxicity. The results show that the pristine TiO₂ and Ag ENPs have some cytotoxic effects at relative high dose, while pristine SiO₂ ENPs and all aged paints with ENPs and control paints do not. In the complex triculture model of the lung-blood barrier, no considerable changes were observed after exposure to subtoxic concentration of the different pristine ENPs and paint particles. In conclusion, we demonstrated that although pristine ENPs show some toxic effects, no significant toxicological effects were observed when they were embedded in a complex paint matrix. PMID:25436935

  10. THE HAZARDS OF PAINTING AND VARNISHING 1965

    PubMed Central

    Piper, Robert

    1965-01-01

    A review of paint hazards is made, giving brief descriptions of methods of application in use in 1965, of paint usage according to resin base, and of paint ingredients. The most interesting and complex of these are the resin bases, which have much in common with plastics. Reference is made to some of the many minor ingredients. The problem of keeping abreast of the possible toxic effects, so that paint manufacturers and their customers may be warned and protected, will be clear. PMID:5836564

  11. Unsteady aerodynamic modeling and active aeroelastic control

    NASA Technical Reports Server (NTRS)

    Edwards, J. W.

    1977-01-01

    Unsteady aerodynamic modeling techniques are developed and applied to the study of active control of elastic vehicles. The problem of active control of a supercritical flutter mode poses a definite design goal stability, and is treated in detail. The transfer functions relating the arbitrary airfoil motions to the airloads are derived from the Laplace transforms of the linearized airload expressions for incompressible two dimensional flow. The transfer function relating the motions to the circulatory part of these loads is recognized as the Theodorsen function extended to complex values of reduced frequency, and is termed the generalized Theodorsen function. Inversion of the Laplace transforms yields exact transient airloads and airfoil motions. Exact root loci of aeroelastic modes are calculated, providing quantitative information regarding subcritical and supercritical flutter conditions.

  12. Advanced Active Thermal Control Systems Architecture Study

    NASA Technical Reports Server (NTRS)

    Hanford, Anthony J.; Ewert, Michael K.

    1996-01-01

    The Johnson Space Center (JSC) initiated a dynamic study to determine possible improvements available through advanced technologies (not used on previous or current human vehicles), identify promising development initiatives for advanced active thermal control systems (ATCS's), and help prioritize funding and personnel distribution among many research projects by providing a common basis to compare several diverse technologies. Some technologies included were two-phase thermal control systems, light-weight radiators, phase-change thermal storage, rotary fluid coupler, and heat pumps. JSC designed the study to estimate potential benefits from these various proposed and under-development thermal control technologies for five possible human missions early in the next century. The study compared all the technologies to a baseline mission using mass as a basis. Each baseline mission assumed an internal thermal control system; an external thermal control system; and aluminum, flow-through radiators. Solar vapor compression heat pumps and light-weight radiators showed the greatest promise as general advanced thermal technologies which can be applied across a range of missions. This initial study identified several other promising ATCS technologies which offer mass savings and other savings compared to traditional thermal control systems. Because the study format compares various architectures with a commonly defined baseline, it is versatile and expandable, and is expected to be updated as needed.

  13. Active Thermal Control System Development for Exploration

    NASA Technical Reports Server (NTRS)

    Westheimer, David

    2007-01-01

    All space vehicles or habitats require thermal management to maintain a safe and operational environment for both crew and hardware. Active Thermal Control Systems (ATCS) perform the functions of acquiring heat from both crew and hardware within a vehicle, transporting that heat throughout the vehicle, and finally rejecting that energy into space. Almost all of the energy used in a space vehicle eventually turns into heat, which must be rejected in order to maintain an energy balance and temperature control of the vehicle. For crewed vehicles, Active Thermal Control Systems are pumped fluid loops that are made up of components designed to perform these functions. NASA has been actively developing technologies that will enable future missions or will provide significant improvements over the state of the art technologies. These technologies have are targeted for application on the Crew Exploration Vehicle (CEV), or Orion, and a Lunar Surface Access Module (LSAM). The technologies that have been selected and are currently under development include: fluids that enable single loop ATCS architectures, a gravity insensitive vapor compression cycle heat pump, a sublimator with reduced sensitivity to feedwater contamination, an evaporative heat sink that can operate in multiple ambient pressure environments, a compact spray evaporator, and lightweight radiators that take advantage of carbon composites and advanced optical coatings.

  14. Active control of electric potential of spacecraft

    NASA Technical Reports Server (NTRS)

    Goldstein, R.

    1977-01-01

    Techniques are discussed for controlling the potential of a spacecraft by means of devices which release appropriate charged particles from the spacecraft to the environment. Attention is given to electron emitters, ion emitters, a basic electron emitter arrangement, techniques for sensing electric field or potential, and flight experiments on active potential control. It is recommended to avoid differential charging on spacecraft surfaces because it can severely affect the efficacy of emitters. Discharging the frame of a spacecraft with dielectric surfaces involves the risk of stressing the dielectric material excessively. The spacecraft should, therefore, be provided with grounded conductive surfaces. It is pointed out that particles released by control systems can return to the spacecraft.

  15. Active control of combustion for optimal performance

    SciTech Connect

    Jackson, M.D.; Agrawal, A.K.

    1999-07-01

    Combustion-zone stoichiometry and fuel-air premixing were actively controlled to optimize the combustor performance over a range of operating conditions. The objective was to maximize the combustion temperature, while maintaining NO{sub x} within a specified limit. The combustion system consisted of a premixer located coaxially near the inlet of a water-cooled shroud. The equivalence ratio was controlled by a variable-speed suction fan located downstream. The split between the premixing air and diffusion air was governed by the distance between the premixer and shroud. The combustor performance was characterized by a cost function evaluated from time-averaged measurements of NO{sub x} and oxygen concentrations in products. The cost function was minimized by downhill simplex algorithm employing closed-loop feedback. Experiments were conducted at different fuel flow rates to demonstrate that the controller optimized the performance without prior knowledge of the combustor behavior.

  16. Distributed control system for active mirrors

    NASA Astrophysics Data System (ADS)

    Rodriguez-Ramos, Luis F.; Williams, Mark R.; Castro, Javier; Cruz, A.; Gonzalez, Juan C.; Mack, Brian; Martin, Carlos; Pescador, German; Sanchez, Vicente; Sosa, Nicolas A.

    1994-06-01

    This paper presents the IAC (Instituto de Astrofisica de Canaries, Spain) proposal of a distributed control system intended for the active support of a 8 m mirror. The system incorporates a large number of compact `smart' force actuators, six force definers, and a mirror support computer (MSC) for interfacing with the telescope control system and for general housekeeping. We propose the use of a network for the interconnection of the actuators, definers and the MSC, which will minimize the physical complexity of the interface between the mirror support system and the MSC. The force actuator control electronics are described in detail, as is the system software architecture of the actuator and the MSC. As the network is a key point for the system, we also detail the evaluation of three candidates, before electing the CAN bus.

  17. Paint and Click: Unified Interactions for Image Boundaries

    SciTech Connect

    Summa, B.; Gooch, A. A.; Scorzelli, G.; Pascucci, V.

    2015-06-22

    Image boundaries are a fundamental component of many interactive digital photography techniques, enabling applications such as segmentation, panoramas, and seamless image composition. Interactions for image boundaries often rely on two complementary but separate approaches: editing via painting or clicking constraints. In this work, we provide a novel, unified approach for interactive editing of pairwise image boundaries that combines the ease of painting with the direct control of constraints. Rather than a sequential coupling, this new formulation allows full use of both interactions simultaneously, giving users unprecedented flexibility for fast boundary editing. To enable this new approach, we provide technical advancements. In particular, we detail a reformulation of image boundaries as a problem of finding cycles, expanding and correcting limitations of the previous work. Our new formulation provides boundary solutions for painted regions with performance on par with state-of-the-art specialized, paint-only techniques. In addition, we provide instantaneous exploration of the boundary solution space with user constraints. Finally, we provide examples of common graphics applications impacted by our new approach.

  18. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.; Sepe, Raymond B.; Rey, Daniel; Saarmaa, Erik; Crawley, Edward F.

    1993-01-01

    The Middeck Active Control Experiment (MACE) is a NASA In-Step and Control Structure Interaction (CSI) Office funded Shuttle middeck experiment. The objective is to investigate the extent to which closed-loop behavior of flexible spacecraft in zero-gravity (0-g) can be predicted. This prediction becomes particularly difficult when dynamic behavior during ground testing exhibits extensive suspension and direct gravity coupling. On-orbit system identification and control reconfiguration is investigated to improve performance which would otherwise be limited due to errors in prediction. The program is presently in its preliminary design phase with launch expected in the summer of 1994. The MACE test article consists of three attitude control torque wheels, a two axis gimballing payload, inertial sensors and a flexible support structure. With the acquisition of a second payload, this will represent a multiple payload platform with significant structural flexibility. This paper presents on-going work in the areas of modelling and control of the MACE test article in the zero and one-gravity environments. Finite element models, which include suspension and gravity effects, and measurement models, derived from experimental data, are used as the basis for Linear Quadratic Gaussian controller designs. Finite element based controllers are analytically used to study the differences in closed-loop performance as the test article transitions between the 0-g and 1-g environments. Measurement based controllers are experimentally applied to the MACE test article in the 1-g environment and achieve over an order of magnitude improvement in payload pointing accuracy when disturbed by a broadband torque disturbance. The various aspects of the flight portion of the experiment are also discussed.

  19. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.; Sepe, Raymond B.; Rey, Daniel; Saarmaa, Erik; Crawley, Edward F.

    1993-02-01

    The Middeck Active Control Experiment (MACE) is a NASA In-Step and Control Structure Interaction (CSI) Office funded Shuttle middeck experiment. The objective is to investigate the extent to which closed-loop behavior of flexible spacecraft in zero-gravity (0-g) can be predicted. This prediction becomes particularly difficult when dynamic behavior during ground testing exhibits extensive suspension and direct gravity coupling. On-orbit system identification and control reconfiguration is investigated to improve performance which would otherwise be limited due to errors in prediction. The program is presently in its preliminary design phase with launch expected in the summer of 1994. The MACE test article consists of three attitude control torque wheels, a two axis gimballing payload, inertial sensors and a flexible support structure. With the acquisition of a second payload, this will represent a multiple payload platform with significant structural flexibility. This paper presents on-going work in the areas of modelling and control of the MACE test article in the zero and one-gravity environments. Finite element models, which include suspension and gravity effects, and measurement models, derived from experimental data, are used as the basis for Linear Quadratic Gaussian controller designs. Finite element based controllers are analytically used to study the differences in closed-loop performance as the test article transitions between the 0-g and 1-g environments. Measurement based controllers are experimentally applied to the MACE test article in the 1-g environment and achieve over an order of magnitude improvement in payload pointing accuracy when disturbed by a broadband torque disturbance. The various aspects of the flight portion of the experiment are also discussed.

  20. Atomic Oxygen Treatment as a Method of Recovering Smoke Damaged Paintings. Revised

    NASA Technical Reports Server (NTRS)

    Rutledge, Sharon K.; Banks, Bruce A.; Forkapa, Mark; Stueber, Thomas; Sechkar, Edward; Malinowski, Kevin

    1999-01-01

    A noncontact technique is described that uses atomic oxygen, generated under low pressure in the presence of nitrogen, to remove soot and charred varnish from the surface of a painting. The process, which involves surface oxidation, permits control of the amount of surface material removed. The effectiveness of the process was evaluated by reflectance measurements from selected areas made during the removal of soot from acrylic gesso, ink on paper, and varnished oil paint substrates. For the latter substrate, treatment also involved the removal of damaged varnish and paint binder from the surface.

  1. Thermal indicating paints for ammunition health monitoring

    NASA Astrophysics Data System (ADS)

    Zunino, James L., III; Iqbal, Zafar

    2010-04-01

    Thermochromic semiconductive polymers that change color in response to external stimuli, such as heat and radiation, can be utilized to monitor the temperature range and elapsed time profiles of stored and prepositioned munitions. These polymers are being tailored to create paints and coatings that will alert Army logistic staff of dangerous temperature exposures. Irreversible indication via color change in multiple thermal bands, 145 F - 164 F (63o-73°C), 165 F - 184 F (74° - 84° C) and over 185 F (>85°C) are possible with these thermochromic polymers. The resulting active coating can be visually inspected to determine if safe temperatures were exceeded. More detailed information, including cumulative time of exposure in certain temperature bands through changes in optical chromaticity describing the vividness or dullness of a color, can be assessed using a hand-held optical densitometer.

  2. PAINT SHOP, FIRST FLOOR, NORTHEAST CORNER OFFICE INTERIOR, LOOKING WEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PAINT SHOP, FIRST FLOOR, NORTHEAST CORNER OFFICE INTERIOR, LOOKING WEST. PROJECTING WALLS WITH INFILLED ARCHES WERE PART OF ONE PAINTING BOOTH IN ORIGINAL STRUCTURE. - Southern Pacific, Sacramento Shops, Paint Shop, 111 I Street, Sacramento, Sacramento County, CA

  3. Diffusely Reflecting Paints Containing TFE

    NASA Technical Reports Server (NTRS)

    Shai, M. C.; Schutt, J. B.

    1985-01-01

    Highly reflective, diffused coatings developed by incorporating polytetrafluoroethylene (TFE) pigment with alcohol-soluble binders. Alcohol and binder mixed together in blender before adding TFE. TFE preferably outgassed in mechanical-pump vacuum for typical interval of 4 hours before adding to liquid. Like wetting agent, vacuum treatment helps to prevent clumping of TFE and eases dispersion throughout mixture. Mixture blended for 3 to 5 minutes before used. Coatings useful on reflectance-standard surfaces for calibrating radiometric instruments in both laboratory and field. Paints washable and usable as optical reference surfaces.

  4. Application of active controls to civil transport aircraft

    NASA Technical Reports Server (NTRS)

    Taylor, L. W., Jr.

    1975-01-01

    The impact of active controls on civil transport aircraft and some of the complex problems involved are described. The approach taken by NASA as part of the Active Control Technology Program is discussed to integrate active controls in the conceptual design phase. It is shown that when handled correctly, active controls improve aircraft performance.

  5. Local flow control for active building facades

    NASA Astrophysics Data System (ADS)

    Kaligotla, Srikar; Chen, Wayne; Glauser, Mark

    2010-11-01

    Existing building facade designs are for a passive and an impermeable shell to prevent migration of outdoor air into the building and to control heat transfers between the exterior environment and the building interior. An active facade that can respond in real time to changing environmental conditions like wind speed and direction, pollutant load, temperature, humidity and light can lower energy use and maximize occupant comfort. With an increased awareness of cost and environmental effects of energy use, cross or natural ventilation has become an attractive method to lower energy use. Separated flow regions around such buildings are undesirable due to high concentration of pollutants, especially if the vents or dynamic windows for cross ventilation are situated in these regions. Outside pollutant load redistribution through vents can be regulated via flow separation control to minimize transport of pollutants into the building. Flow separation has been substantially reduced with the application of intelligent flow control tools developed at Syracuse University for flow around "silo" (turret) like structures. Similar flow control models can be introduced into buildings with cross ventilation for local external flow separation control. Initial experiments will be performed for turbulent flow over a rectangular block (scaled to be a mid-rise building) that has been configured with dynamic vents and unsteady suction actuators in a wind tunnel at various wind speeds.

  6. Middeck Active Control Experiment (MACE), phase A

    NASA Technical Reports Server (NTRS)

    Crawley, Edward F.; Deluis, Javier; Miller, David W.

    1989-01-01

    A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed.

  7. 40 CFR 745.327 - State or Indian Tribal lead-based paint compliance and enforcement programs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false State or Indian Tribal lead-based paint compliance and enforcement programs. 745.327 Section 745.327 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES State and...

  8. 40 CFR 745.327 - State or Indian Tribal lead-based paint compliance and enforcement programs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the requirements of 40 CFR part 3—(Electronic reporting) are satisfied in their lead-based paint... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION... 40 Protection of Environment 31 2014-07-01 2014-07-01 false State or Indian Tribal...

  9. 40 CFR 745.327 - State or Indian Tribal lead-based paint compliance and enforcement programs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the requirements of 40 CFR part 3—(Electronic reporting) are satisfied in their lead-based paint... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION... 40 Protection of Environment 32 2013-07-01 2013-07-01 false State or Indian Tribal...

  10. Nanoparticle Mediated Remote Control of Enzymatic Activity

    PubMed Central

    Knecht, Leslie D.; Ali, Nur; Wei, Yinan; Hilt, J. Zach; Daunert, Sylvia

    2012-01-01

    Nanomaterials have found numerous applications as tunable, remotely controlled platforms for drug delivery, hyperthermia cancer treatment, and various other biomedical applications. The basis for the interest lies in their unique properties achieved at the nanoscale that can be accessed via remote stimuli. These properties could then be exploited to simultaneously activate secondary systems that are not remotely actuatable. In this work, iron oxide nanoparticles are encapsulated in a bisacrylamide-crosslinked polyacrylamide hydrogel network along with a model dehalogenase enzyme, L-2-HADST. This thermophilic enzyme is activated at elevated temperatures and has been shown to have optimal activity at 70 °C. By exposing the Fe3O4 nanoparticles to a remote stimulus, an alternating magnetic field (AMF), enhanced system heating can be achieved, thus remotely activating the enzyme. The internal heating of the nanocomposite hydrogel network in the AMF results in a 2-fold increase in enzymatic activity as compared to the same hydrogel heated externally in a water bath, suggesting that the internal heating of the nanoparticles is more efficient than the diffusion limited heating of the water bath. This system may prove useful for remote actuation of biomedical and environmentally relevant enzymes and find applications in a variety of fields. PMID:22989219

  11. Application of the pressure sensitive paint technique to steady and unsteady flow

    NASA Technical Reports Server (NTRS)

    Shimbo, Y.; Mehta, R.; Cantwell, B.

    1996-01-01

    Pressure sensitive paint is a newly-developed optical measurement technique with which one can get a continuous pressure distribution in much shorter time and lower cost than a conventional pressure tap measurement. However, most of the current pressure sensitive paint applications are restricted to steady pressure measurement at high speeds because of the small signal-to-noise ratio at low speed and a slow response to pressure changes. In the present study, three phases of work have been completed to extend the application of the pressure sensitive paint technique to low-speed testing and to investigate the applicability of the paint technique to unsteady flow. First the measurement system using a commercially available PtOEP/GP-197 pressure sensitive paint was established and applied to impinging jet measurements. An in-situ calibration using only five pressure tap data points was applied and the results showed good repeatability and good agreement with conventional pressure tap measurements on the whole painted area. The overall measurement accuracy in these experiments was found to be within 0.1 psi. The pressure sensitive paint technique was then applied to low-speed wind tunnel tests using a 60 deg delta wing model with leading edge blowing slots. The technical problems encountered in low-speed testing were resolved by using a high grade CCD camera and applying corrections to improve the measurement accuracy. Even at 35 m/s, the paint data not only agreed well with conventional pressure tap measurements but also clearly showed the suction region generated by the leading edge vortices. The vortex breakdown was also detected at alpha=30 deg. It was found that a pressure difference of 0.2 psi was required for a quantitative pressure measurement in this experiment and that temperature control or a parallel temperature measurement is necessary if thermal uniformity does not hold on the model. Finally, the pressure sensitive paint was applied to a periodically

  12. Products of Chemistry: Chemistry of Paint.

    ERIC Educational Resources Information Center

    Schuerman, George; Bruzan, Raymond

    1989-01-01

    Presents an overview of coatings along with paint preparation labs. Provides students with information about and methods for preparing a product that is an integral part of daily life. Gives methodology which can be used to prepare oil based and water based paints. (MVL)

  13. Detecting Corrosion Under Paint and Insulation

    NASA Technical Reports Server (NTRS)

    Bastin, Gary L.

    2011-01-01

    Corrosion is a major concern at the Kennedy Space Center in Florida due to the proximity of the center to the Atlantic Ocean and to salt water lagoons. High humidity, salt fogs, and ocean breezes, provide an ideal environment in which painted steel structures become corroded. Maintenance of painted steel structures is a never-ending process.

  14. Fluorescent paint simplifies laser-beam alinement

    NASA Technical Reports Server (NTRS)

    Will, H. A.

    1978-01-01

    Usually to aline optics safely, low power laser which can safely operated without safety goggles is substituted for higher power laser during alinement procedure. Need for lower power substitute laser can be eliminated by painting target area with commercial paint which fluoresces strongly in red or yellow portion of spectrum when excited by argon laser beam.

  15. WASH SOLVENT REUSE IN PAINT PRODUCTION

    EPA Science Inventory

    This project evaluated solvent used to clean paint manufacture equipment for its utility in production of subsequent batches of solvent-borne paint. eusing wash solvent would reduce the amount of solvent disposed of as waste. he evaluation of this wash-solvent recovery technology...

  16. The Sign System in Chinese Landscape Paintings

    ERIC Educational Resources Information Center

    McMahon, Cliff G.

    2003-01-01

    Paintings emerge from a culture field and must be interpreted in relation to the net of culture. A given culture will be implicated by the sign system used by the painter. Everyone agrees that in Chinese landscape paintings, the most important cultural bond is to ancient Chinese Taoism, and to a lesser degree, to Confucianism. Obviously, then, the…

  17. Roosters Rule: A Painted Paper Collage

    ERIC Educational Resources Information Center

    Brady, Susan

    2011-01-01

    On perusing American collage artist Eric Carle's book, "Rooster's Off to See the World," at an annual school book fair, the author, mesmerized by the carnival of colors and collage on each page, thought "What a wonderful visual aid for a combination painting and collage unit." Her first-graders were involved in a painting unit, and knowing their…

  18. Lead content in household paints in India.

    PubMed

    Kumar, Abhay; Gottesfeld, Perry

    2008-12-15

    Lead and its compounds are used in paints not only to impart colour but also to make it durable, corrosion resistant and to improve drying. Adverse health impacts of lead especially on children have led countries to restrict or ban its use in paints. While U.S. and other developed countries instituted measures to limit the use of lead in paints, some developing countries including India have failed to regulate their lead content. The present study was undertaken to determine the levels of lead in new latex (water-based) and enamel paints (oil-based) intended for residential use in India. A total of 69 paint samples (38 latex and 31 enamel samples) from six of the most popular brands were analysed for lead concentrations. While all latex paint samples contained low levels of lead, (i.e., well below 600 ppm as regulated by United States' Consumer Products Safety Commission) the enamel paint samples of all but one brand contained significant concentrations of lead, ranging up to 140,000 ppm. In fact 84% of the enamel paints tested exceeded 600 ppm whereas only 38 % of all samples (including latex and enamel types) exceeded this regulatory level. PMID:18950834

  19. Order-fractal transitions in abstract paintings

    NASA Astrophysics Data System (ADS)

    de la Calleja, E. M.; Cervantes, F.; de la Calleja, J.

    2016-08-01

    In this study, we determined the degree of order for 22 Jackson Pollock paintings using the Hausdorff-Besicovitch fractal dimension. Based on the maximum value of each multi-fractal spectrum, the artworks were classified according to the year in which they were painted. It has been reported that Pollock's paintings are fractal and that this feature was more evident in his later works. However, our results show that the fractal dimension of these paintings ranges among values close to two. We characterize this behavior as a fractal-order transition. Based on the study of disorder-order transition in physical systems, we interpreted the fractal-order transition via the dark paint strokes in Pollock's paintings as structured lines that follow a power law measured by the fractal dimension. We determined self-similarity in specific paintings, thereby demonstrating an important dependence on the scale of observations. We also characterized the fractal spectrum for the painting entitled Teri's Find. We obtained similar spectra for Teri's Find and Number 5, thereby suggesting that the fractal dimension cannot be rejected completely as a quantitative parameter for authenticating these artworks.

  20. Painting.

    ERIC Educational Resources Information Center

    Highwater, Jamake

    1980-01-01

    To the Indian, art is a way of seeing, and the Indian painters of the 1970s have given greater emphasis to the personal nature of seeing than have any Native artists before them. Article discusses recent trends, qualities, and innovations in Indian art and some of the significant Indian artists.

  1. Art Teaching Guides: Painting. Kindergarten-Grade 6. Curriculum Bulletin. No. 8 g. 1968-69 Series.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

    Growth in painting ability is dependent on frequent painting experiences, on thoughtful motivation, and on proper guidance and evaluation of progress. This guide includes materials and equipment, motivation, guidance procedures, activities, and evaluation for each grade level. A working space with materials and equipment in the classroom needs to…

  2. Active Displacement Control of Active Magnetic Bearing System

    NASA Astrophysics Data System (ADS)

    Kertész, Milan; Kozakovič, Radko; Magdolen, Luboš; Masaryk, Michal

    2014-12-01

    The worldwide energy production nowadays is over 3400 GW while storage systems have a capacity of only 90 GW [1]. There is a good solution for additional storage capacity in flywheel energy storage systems (FES). The main advantage of FES is its relatively high efficiency especially with using the active magnetic bearing system. Therefore there exist good reasons for appropriate simulations and for creating a suitable magneto-structural control system. The magnetic bearing, including actuation, is simulated in the ANSYS parametric design language (APDL). APDL is used to create the loops of transient simulations where boundary conditions (BC) are updated based upon a "gap sensor" which controls the nodal position values of the centroid of the shaft and the current density inputs onto the copper windings.

  3. Understanding the brain by controlling neural activity

    PubMed Central

    Krug, Kristine; Salzman, C. Daniel; Waddell, Scott

    2015-01-01

    Causal methods to interrogate brain function have been employed since the advent of modern neuroscience in the nineteenth century. Initially, randomly placed electrodes and stimulation of parts of the living brain were used to localize specific functions to these areas. Recent technical developments have rejuvenated this approach by providing more precise tools to dissect the neural circuits underlying behaviour, perception and cognition. Carefully controlled behavioural experiments have been combined with electrical devices, targeted genetically encoded tools and neurochemical approaches to manipulate information processing in the brain. The ability to control brain activity in these ways not only deepens our understanding of brain function but also provides new avenues for clinical intervention, particularly in conditions where brain processing has gone awry. PMID:26240417

  4. Control concepts for active magnetic bearings

    NASA Technical Reports Server (NTRS)

    Siegwart, Roland; Vischer, D.; Larsonneur, R.; Herzog, R.; Traxler, Alfons; Bleuler, H.; Schweitzer, G.

    1992-01-01

    Active Magnetic Bearings (AMB) are becoming increasingly significant for various industrial applications. Examples are turbo-compressors, centrifuges, high speed milling and grinding spindles, vibration isolation, linear guides, magnetically levitated trains, vacuum and space applications. Thanks to the rapid progress and drastic cost reduction in power- and micro-electronics, the number of AMB applications is growing very rapidly. Industrial uses of AMBs leads to new requirements for AMB-actuators, sensor systems, and rotor dynamics. Especially desirable are new and better control concepts to meet demand such as low cost AMB, high stiffness, high performance, high robustness, high damping up to several kHz, vibration isolation, force-free rotation, and unbalance cancellation. This paper surveys various control concepts for AMBs and discusses their advantages and disadvantages. Theoretical and experimental results are presented.

  5. Gas turbine engine active clearance control

    NASA Technical Reports Server (NTRS)

    Deveau, Paul J. (Inventor); Greenberg, Paul B. (Inventor); Paolillo, Roger E. (Inventor)

    1985-01-01

    Method for controlling the clearance between rotating and stationary components of a gas turbine engine are disclosed. Techniques for achieving close correspondence between the radial position of rotor blade tips and the circumscribing outer air seals are disclosed. In one embodiment turbine case temperature modifying air is provided in flow rate, pressure and temperature varied as a function of engine operating condition. The modifying air is scheduled from a modulating and mixing valve supplied with dual source compressor air. One source supplies relatively low pressure, low temperature air and the other source supplies relatively high pressure, high temperature air. After the air has been used for the active clearance control (cooling the high pressure turbine case) it is then used for cooling the structure that supports the outer air seal and other high pressure turbine component parts.

  6. Active Aircraft Pylon Noise Control System

    NASA Technical Reports Server (NTRS)

    Thomas, Russell H. (Inventor); Czech, Michael J (Inventor); Elmiligui, Alaa A. (Inventor)

    2015-01-01

    An active pylon noise control system for an aircraft includes a pylon structure connecting an engine system with an airframe surface of the aircraft and having at least one aperture to supply a gas or fluid therethrough, an intake portion attached to the pylon structure to intake a gas or fluid, a regulator connected with the intake portion via a plurality of pipes, to regulate a pressure of the gas or fluid, a plenum chamber formed within the pylon structure and connected with the regulator, and configured to receive the gas or fluid as regulated by the regulator, and a plurality of injectors in communication with the plenum chamber to actively inject the gas or fluid through the plurality of apertures of the pylon structure.

  7. Accurate Measurements of Spectral Reflectance in Picasso's Guernica Painting.

    PubMed

    de Luna, Javier Muñoz; Fernandez-Balbuena, Antonio Alvarez; Vázquez, Daniel; Melgosa, Manuel; Durán, Humberto; García, Jorge; Muro, Carmen

    2016-01-01

    The use of non-invasive spectral measurements to control the conservation status is a part of the preventive conservation of artworks which nowadays is becoming increasingly interesting. This paper describes how to use a spectral measuring device and an illumination system specifically designed for such a task in a very large dimension artwork painting (7.8 m wide × 3.5 m high). The system, controlled by a Cartesian robot, allows spectral measurements in a spectral range of 400-780 nm. The measured data array has a total of 2201 circular regions with 5.5 mm spot diameter placed on a square grid. Colorimetric calculations performed from these spectral measurements may be used to characterize color shifts related to reflectance changes in specific areas of the paint. A color shifting from the expected gray has been shown. PMID:26767640

  8. Landscape paintings of the 17th and 19th century as a tool for coastal zone management

    NASA Astrophysics Data System (ADS)

    Jungerius, P. D.; van den Ancker, J.

    2012-04-01

    For more than fifty years many Dutch landscapes suffered severe damage. For their management, it is valuable to know what they looked like in the past. Historic maps give inadequate information, and landscape and aerial photographs are scarcely available until the 1940s. Before then landscapes have been documented chiefly by landscape painters. Interpreted with care, Dutch landscape paintings of the 17th and 19th century are an invaluable geoheritage archive and also hold information that is relevant for present-day landscape management. We present paintings of the Dutch coastal zone as an example. The coastal zone of the Netherlands is geomorphologically well developed, with beaches, foredunes, medieval 'Young dunes', and 5000 year old beach ridges with several anthropic modifications. Each of these terrains attracted landscape painters. Representative paintings can be found in museums and art galleries. We evaluated hundreds of paintings of the collection of Simonis & Buunk, an art gallery in Ede specialised in 19th and early 20th century landscape paintings, for the geoheritage information they contain. The collection, which is the largest on the subject on¬line available in Europe, can be freely consulted (www.simonis--buunk.com). The freedom taken by the painters to adjust reality for compositional or stylistic reasons is still subject of discussion. The paintings became more realistic in the middle of the 19th century when paints became available in tubes and the painters could leave their studio to work in the field. We selected paintings that are sufficiently realistic to be translated in real landscape features, including geomorphological processes and elements. Some insights: • Because of the overriding control of marine and eolian processes, the appearance of the beaches has not changed since the 16th century. • The difference between the flat beaches of the Netherlands and the steeper beaches is accurately registered by the painters. • On a coast

  9. The use of abstract paintings and narratives to foster reflective capacity in medical educators: a multinational faculty development workshop

    PubMed Central

    Karkabi, Khaled; Wald, Hedy S; Cohen Castel, Orit

    2014-01-01

    Reflective capacity is integral to core healthcare professional practice competencies. Reflection plays a central role in teacher education as reflecting on teaching behaviours with critical analysis can potentially improve teaching practice. The humanities including narrative and the visual arts can serve as a valuable tool for fostering reflection. We conducted a multinational faculty development workshop aiming to enhance reflective capacity in medical educators by using a combination of abstract paintings and narratives. Twenty-three family physicians or physicians-in-training from 10 countries participated in the workshop. Qualitative assessment of the workshop showed that the combined use of art and narrative was well received and perceived as contributing to the reflective exercise. Participants generally felt that viewing abstract paintings had facilitated a valuable mood transformation and prepared them emotionally for the reflective writing. Our analysis found that the following themes emerged from participants’ responses: (1) narratives from different countries are similar; (2) the use of art helped access feelings; (3) viewing abstract paintings facilitated next steps; (4) writing reflective narratives promoted examination of educational challenges, compassion for self and other, and building an action plan; and (5) sharing of narrative was helpful for fostering active listening and appreciating multiple perspectives. Future research might include comparing outcomes for a group participating in arts–narrative-based workshops with those of a control group using only reflective narrative or in combination with figurative art, and implementing a combination of qualitative and quantitative methods of assessment. PMID:24273319

  10. The use of abstract paintings and narratives to foster reflective capacity in medical educators: a multinational faculty development workshop.

    PubMed

    Karkabi, Khaled; Wald, Hedy S; Cohen Castel, Orit

    2014-06-01

    Reflective capacity is integral to core healthcare professional practice competencies. Reflection plays a central role in teacher education as reflecting on teaching behaviours with critical analysis can potentially improve teaching practice. The humanities including narrative and the visual arts can serve as a valuable tool for fostering reflection. We conducted a multinational faculty development workshop aiming to enhance reflective capacity in medical educators by using a combination of abstract paintings and narratives. Twenty-three family physicians or physicians-in-training from 10 countries participated in the workshop. Qualitative assessment of the workshop showed that the combined use of art and narrative was well received and perceived as contributing to the reflective exercise. Participants generally felt that viewing abstract paintings had facilitated a valuable mood transformation and prepared them emotionally for the reflective writing. Our analysis found that the following themes emerged from participants' responses: (1) narratives from different countries are similar; (2) the use of art helped access feelings; (3) viewing abstract paintings facilitated next steps; (4) writing reflective narratives promoted examination of educational challenges, compassion for self and other, and building an action plan; and (5) sharing of narrative was helpful for fostering active listening and appreciating multiple perspectives. Future research might include comparing outcomes for a group participating in arts-narrative-based workshops with those of a control group using only reflective narrative or in combination with figurative art, and implementing a combination of qualitative and quantitative methods of assessment. PMID:24273319

  11. Dominant inheritance of overo spotting in paint horses.

    PubMed

    Bowling, A T

    1994-01-01

    Analysis of selected studbook records of the American Paint Horse Association, consisting of 687 foals sired by 13 overo stallions from non-overo mares, supports the inheritance of overo spotting as an autosomal dominant gene. More than one gene may control patterns registered as overo. Additional studies are necessary to explain the sporadic occurrence of overo spotting from nonspotted quarter horse parents and to confirm the inheritance of overo spotting in other breeds. PMID:8014463

  12. Missile flight control using active flexspar actuators

    NASA Astrophysics Data System (ADS)

    Barrett, Ronald M.; Gross, R. Steven; Brozoski, Fred

    1995-05-01

    A new type of subsonic missile flight control surface using piezoelectric flexspar actuators is presented. The flexspar design uses an aerodynamic shell which is pivoted at the quarter-chord about a graphite main spar. The shell is pitched up and down by a piezoelectric bender element which is rigidly attached to a base mount and allowed to rotate freely at the tip. The element curvature, shell pitch deflection and torsional stiffness are modeled using laminated plate theory. A one-third scale TOW 2B missile model was used as a demonstration platform. A static wing of the missile was replaced with an active flexspar wing. The 1' X 2.7' active flight control surface was powered by a bi-morph bender with 5-mil PZT-5H sheets. Bench and wind tunnel testing showed good correlation between theory and experiment and static pitch deflections in excess of +/- 14 degree(s). A natural frequency of 78.5 rad/s with a break frequency of 157 rad/s was measured. Wind tunnel tests revealed no flutter or divergence tendencies. Maximum changes in lift coefficient were measured at (Delta) CL equals +/- .73 which indicates that terminal and initial missile load factors may be increased by approximately 3.1 and 12.6 g's respectively, leading to a greatly reduced turn radius of only 2,400 ft.

  13. Digital imaging of autoradiographs from paintings by Georges de La Tour (1593-1652)

    NASA Astrophysics Data System (ADS)

    Fischer, C.-O.; Gallagher, M.; Laurenze, C.; Schmidt, Ch; Slusallek, K.

    1999-11-01

    The artistic work of the painter Georges de La Tour has been studied very intensively in the last few years, mainly by French and US-American art historians and natural scientists. To support the in-depth analysis of two paintings from the Kimbell Art Museum in Fort Worth, Texas, USA, two similar paintings from the Gemäldegalerie Berlin have been investigated. The method of neutron activation autoradiography has been applied using imaging plates with digital image processing.

  14. Disease painting or painting disease: how does illness and hospitalisation affect children's artistry?

    PubMed

    Bayrakci, Benan; Forouz, Aria; Sahin, Ahmet B; Abali, Mustafa; Aliyeva, Gyulten Z

    2009-01-01

    There are numerous speculations about famous artists and how their perception was affected by their medical conditions. In this study, we examined how illness and hospitalisation affect children's art. A total of 157 paintings by 122 hospitalised children were interpreted by three reputed artists. Works of ill children were compared with those of a control group from an international art exhibition. We also comment on how diseases influenced the technique of famous artists to further examine the possible impact of illness on the artistry of hospitalised children. Developmental delay in painting was evident in the study group. Use of ready-made schemas was a common practice (55%). 56% of the work from patients older than eight years failed in perspective and site perception. The theme in 89% of the drawings had no human figures. Projection of self sufferings, prominent elementary lines, and reflection of distorted perception could be clearly recognised in various study materials; anxiety about assigned surgery was exhibited by scribbling. There exists a close relationship between medicine and humanities. The interpretation of fine art from a medical perspective may help to increase our appreciation of the suffering of an individual. It is obvious that diseases change the artistic style and inner perspective. The question is how do healthcare specialists view this? PMID:20120269

  15. Accuracy of Pressure Sensitive Paint

    NASA Technical Reports Server (NTRS)

    Liu, Tianshu; Guille, M.; Sullivan, J. P.

    2001-01-01

    Uncertainty in pressure sensitive paint (PSP) measurement is investigated from a standpoint of system modeling. A functional relation between the imaging system output and luminescent emission from PSP is obtained based on studies of radiative energy transports in PSP and photodetector response to luminescence. This relation provides insights into physical origins of various elemental error sources and allows estimate of the total PSP measurement uncertainty contributed by the elemental errors. The elemental errors and their sensitivity coefficients in the error propagation equation are evaluated. Useful formulas are given for the minimum pressure uncertainty that PSP can possibly achieve and the upper bounds of the elemental errors to meet required pressure accuracy. An instructive example of a Joukowsky airfoil in subsonic flows is given to illustrate uncertainty estimates in PSP measurements.

  16. [Obesity and thinness in painting].

    PubMed

    Schüller Pérez, Amador

    2004-01-01

    The obesity, serious frequenty sanitary problem, cause of complications that effects to the expectation of life, with aesthetic repercussion and with an increase in the last decades. Admitted the obesity android, gynoide, central or abdominal, wide aesthetic repercussion and physiopathologic like hyperdislipemias, metabolic alterations (diabetes mellitus, etc...), arterial hypertension, column arthrosis and outlying. Ethiopathologics co-factors, sedentariness, genotypic predisposition, endocrine alterations and of the leptina secretion. Illustrative cases of obesity in the painting of those that characteristic models are exposed, from slight grades to intense affecting to both genders. The thinness counterpoint of the obesity, multicausal process, less frequent than the obesity with aesthetic and psychological repercussion. It is the formed aesthetic thinness to the diverse types physiopathologic, without forgetting the constitutional and family form and the anorexy, the serial ones to disasters, wars, famines, etc..., the mystic thinness of saints and ascetics, and the serial one to consuming processes. PMID:15997591

  17. Characterizing microbial diversity and damage in mural paintings.

    PubMed

    Rosado, Tânia; Mirão, José; Candeias, António; Caldeira, Ana Teresa

    2015-02-01

    Mural paintings are some of the oldest and most important cultural expressions of mankind and play an important role for the understanding of societies and civilizations. These cultural assets have high economic and cultural value and therefore their degradation has social and economic impact. The present work presents a novel microanalytical approach to understand the damages caused by microbial communities in mural paintings. This comprises the characterization and identification of microbial diversity and evaluation of damage promoted by their biological activity. Culture-dependent methods and DNA-based approaches like denaturing gradient gel electrophoresis (DGGE) and pyrosequencing are important tools in the isolation and identification of the microbial communities allowing characterization of the biota involved in the biodeterioration phenomena. Raman microspectrometry, infrared spectrometry, and variable pressure scanning electron microscopy coupled with energy-dispersive X-ray spectrometry are also useful tools for evaluation of the presence of microbial contamination and detection of the alteration products resulting from metabolic activity of the microorganisms. This study shows that the degradation status of mural paintings can be correlated to the presence of metabolically active microorganisms. PMID:25358672

  18. Inadvertent Polychlorinated Biphenyls in Commercial Paint Pigments†

    PubMed Central

    2009-01-01

    A polychlorinated biphenyl (PCB) that was not produced as part of the Aroclor mixtures banned in the 1980s was recently reported in air samples collected in Chicago, Philadelphia, the Arctic, and several sites around the Great Lakes. In Chicago, the congener 3,3′-dichlorobiphenyl or PCB11 was found to be the fifth most concentrated congener and ubiquitous throughout the city. The congener exhibited strong seasonal concentration trends that suggest volatilization of this compound from common outdoor surfaces. Due to these findings and also the compound’s presence in waters that received waste from paint manufacturing facilities, we hypothesized that PCB11 may be present in current commercial paint. In this study we measured PCBs in paint sold on the current retail market. We tested 33 commercial paint pigments purchased from three local paint stores. The pigment samples were analyzed for all 209 PCB congeners using gas chromatography with tandem mass spectrometry (GC-MS/MS). More than 50 PCB congeners including several dioxin-like PCBs were detected, and the PCB profiles varied due to different types of pigments and different manufacturing processes. PCB congeners were detected in azo and phthalocyanine pigments which are commonly used in paint but also in inks, textiles, paper, cosmetics, leather, plastics, food and other materials. Our findings suggest several possible mechanisms for the inadvertent production of specific PCB congeners during the manufacturing of paint pigments. PMID:19957996

  19. Inadvertent polychlorinated biphenyls in commercial paint pigments.

    PubMed

    Hu, Dingfei; Hornbuckle, Keri C

    2010-04-15

    A polychlorinated biphenyl (PCB) that was not produced as part of the Aroclor mixtures banned in the 1980s was recently reported in air samples collected in Chicago, Philadelphia, the Arctic, and several sites around the Great Lakes. In Chicago, the congener 3,3'-dichlorobiphenyl or PCB11 was found to be the fifth most concentrated congener and ubiquitous throughout the city. The congener exhibited strong seasonal concentration trends that suggest volatilization of this compound from common outdoor surfaces. Due to these findings and also the compound's presence in waters that received waste from paint manufacturing facilities, we hypothesized that PCB11 may be present in current commercial paint. In this study we measured PCBs in paint sold on the current retail market. We tested 33 commercial paint pigments purchased from three local paint stores. The pigment samples were analyzed for all 209 PCB congeners using gas chromatography with tandem mass spectrometry (GC-MS/MS). More than 50 PCB congeners including several dioxin-like PCBs were detected, and the PCB profiles varied due to different types of pigments and different manufacturing processes. PCB congeners were detected in azo and phthalocyanine pigments which are commonly used in paint but also in inks, textiles, paper, cosmetics, leather, plastics, food and other materials. Our findings suggest several possible mechanisms for the inadvertent production of specific PCB congeners during the manufacturing of paint pigments. PMID:19957996

  20. Amplitude Scaling of Active Separation Control

    NASA Technical Reports Server (NTRS)

    Stalnov, Oksana; Seifert, Avraham

    2010-01-01

    Three existing and two new excitation magnitude scaling options for active separation control at Reynolds numbers below one Million. The physical background for the scaling options was discussed and their relevance was evaluated using two different sets of experimental data. For F+ approx. 1, 2D excitation: a) The traditional VR and C(mu) - do not scale the data. b) Only the Re*C(mu) is valid. This conclusion is also limited for positive lift increment.. For F+ > 10, 3D excitation, the Re corrected C(mu), the St corrected velocity ratio and the vorticity flux coefficient, all scale the amplitudes equally well. Therefore, the Reynolds weighted C(mu) is the preferred choice, relevant to both excitation modes. Incidence also considered, using Ue from local Cp.

  1. Ribosome-dependent activation of stringent control.

    PubMed

    Brown, Alan; Fernández, Israel S; Gordiyenko, Yuliya; Ramakrishnan, V

    2016-06-01

    In order to survive, bacteria continually sense, and respond to, environmental fluctuations. Stringent control represents a key bacterial stress response to nutrient starvation that leads to rapid and comprehensive reprogramming of metabolic and transcriptional patterns. In general, transcription of genes for growth and proliferation is downregulated, while those important for survival and virulence are upregulated. Amino acid starvation is sensed by depletion of the aminoacylated tRNA pools, and this results in accumulation of ribosomes stalled with non-aminoacylated (uncharged) tRNA in the ribosomal A site. RelA is recruited to stalled ribosomes and activated to synthesize a hyperphosphorylated guanosine analogue, (p)ppGpp, which acts as a pleiotropic secondary messenger. However, structural information about how RelA recognizes stalled ribosomes and discriminates against aminoacylated tRNAs is missing. Here we present the cryo-electron microscopy structure of RelA bound to the bacterial ribosome stalled with uncharged tRNA. The structure reveals that RelA utilizes a distinct binding site compared to the translational factors, with a multi-domain architecture that wraps around a highly distorted A-site tRNA. The TGS (ThrRS, GTPase and SpoT) domain of RelA binds the CCA tail to orient the free 3' hydroxyl group of the terminal adenosine towards a β-strand, such that an aminoacylated tRNA at this position would be sterically precluded. The structure supports a model in which association of RelA with the ribosome suppresses auto-inhibition to activate synthesis of (p)ppGpp and initiate the stringent response. Since stringent control is responsible for the survival of pathogenic bacteria under stress conditions, and contributes to chronic infections and antibiotic tolerance, RelA represents a good target for the development of novel antibacterial therapeutics. PMID:27279228

  2. Active Control of Wind Tunnel Noise

    NASA Technical Reports Server (NTRS)

    Hollis, Patrick (Principal Investigator)

    1991-01-01

    The need for an adaptive active control system was realized, since a wind tunnel is subjected to variations in air velocity, temperature, air turbulence, and some other factors such as nonlinearity. Among many adaptive algorithms, the Least Mean Squares (LMS) algorithm, which is the simplest one, has been used in an Active Noise Control (ANC) system by some researchers. However, Eriksson's results, Eriksson (1985), showed instability in the ANC system with an ER filter for random noise input. The Restricted Least Squares (RLS) algorithm, although computationally more complex than the LMS algorithm, has better convergence and stability properties. The ANC system in the present work was simulated by using an FIR filter with an RLS algorithm for different inputs and for a number of plant models. Simulation results for the ANC system with acoustic feedback showed better robustness when used with the RLS algorithm than with the LMS algorithm for all types of inputs. Overall attenuation in the frequency domain was better in the case of the RLS adaptive algorithm. Simulation results with a more realistic plant model and an RLS adaptive algorithm showed a slower convergence rate than the case with an acoustic plant as a delay plant. However, the attenuation properties were satisfactory for the simulated system with the modified plant. The effect of filter length on the rate of convergence and attenuation was studied. It was found that the rate of convergence decreases with increase in filter length, whereas the attenuation increases with increase in filter length. The final design of the ANC system was simulated and found to have a reasonable convergence rate and good attenuation properties for an input containing discrete frequencies and random noise.

  3. Missile flight control using active flexspar actuators

    NASA Astrophysics Data System (ADS)

    Barrett, Ron; Gross, R. Steven; Brozoski, Fred

    1996-04-01

    A new type of subsonic missile flight control surface using piezoelectric flexspar actuators is presented. The flexspar design uses an aerodynamic shell which is pivoted at the quarter-chord about a graphite main spar. The shell is pitched up and down by a piezoelectric bender element which is rigidly attached to a base mount and allowed to rotate freely at the tip. The element curvature, shell pitch deflection and torsional stiffness are modeled using laminated plate theory. A one-third scale TOW 2B missile model was used as a demonstration platform. A static wing of the missile was replaced with an active flexspar wing. The 1 in 0964-1726/5/2/002/img1 2.7 in active flight control surface was powered by a bimorph bender with 5 mil PZT-5H sheets. Bench and wind tunnel testing showed good correlation between theory and experiment and static pitch deflections in excess of 0964-1726/5/2/002/img2. A natural frequency of 78.5 rad 0964-1726/5/2/002/img3 with a break frequency of 157 rad 0964-1726/5/2/002/img3 was measured. Wind tunnel tests revealed no flutter or divergence tendencies. Maximum changes in lift coefficient were measured at 0964-1726/5/2/002/img5 which indicates that terminal and initial missile load factors may be increased by approximately 3.1 and 12.6 g respectively, leading to a greatly reduced turn radius of only 2400 ft.

  4. Active Shielding and Control of Environmental Noise

    NASA Technical Reports Server (NTRS)

    Tsynkov, S. V.

    2001-01-01

    In the framework of the research project supported by NASA under grant # NAG-1-01064, we have studied the mathematical aspects of the problem of active control of sound, i.e., time-harmonic acoustic disturbances. The foundations of the methodology are described in our paper [1]. Unlike. many other existing techniques, the approach of [1] provides for the exact volumetric cancellation of the unwanted noise on a given predetermined region airspace, while leaving unaltered those components of the total acoustic field that are deemed as friendly. The key finding of the work is that for eliminating the unwanted component of the acoustic field in a given area, one needs to know relatively little; in particular, neither the locations nor structure nor strength of the exterior noise sources need to be known. Likewise, there is no need to know the volumetric properties of the supporting medium across which the acoustic signals propagate, except, maybe, in a narrow area of space near the perimeter of the protected region. The controls are built based solely on the measurements performed on the perimeter of the domain to be shielded; moreover, the controls themselves (i.e., additional sources) are concentrated also only on or near this perimeter. Perhaps as important, the measured quantities can refer to the total acoustic field rather than to its unwanted component only, and the methodology can automatically distinguish between the two. In [1], we have constructed the general solution for controls. The apparatus used for deriving this general solution is closely connected to the concepts of generalized potentials and boundary projections of Calderon's type. For a given total wave field, the application of a Calderon's projection allows one to definitively tell between its incoming and outgoing components with respect to a particular domain of interest, which may have arbitrary shape. Then, the controls are designed so that they suppress the incoming component for the domain

  5. Eco-friendly carbon-nanodot-based fluorescent paints for advanced photocatalytic systems.

    PubMed

    Park, So Young; Lee, Hyun Uk; Lee, Young-Chul; Choi, Saehae; Cho, Dae Hyun; Kim, Hee Sik; Bang, Sunghee; Seo, Soonjoo; Lee, Soon Chang; Won, Jonghan; Son, Byung-Chul; Yang, Mino; Lee, Jouhahn

    2015-01-01

    Fluorescent carbon nanomaterials, especially zero-dimensional (0D) carbon nanodots (CDs), are widely used in broad biological and optoelectronic applications. CDs have unique characteristics such as strong fluorescence, biocompatibility, sun-light response, and capability of mass-production. Beyond the previous green CD obtained from harmful natural substances, we report a new type of fluid-based fluorescent CD paints (C-paints) derived from polyethylene glycol (PEG; via simple ultrasound irradiation at room temperatures) and produced in quantum yields of up to ~14%. Additionally, C-paints possess a strong, UV- and visible-light-responsive photoluminescent (PL) property. Most especially, C-paints, by incorporation into a photocatalytic system, show additional roles in the emission of fluorescent light for activation of TiO2 nanoparticles (NPs) and the resultant detoxification of most organic dyes, thus further enabling embarkation in advanced water purification. PMID:26201431

  6. Eco-friendly carbon-nanodot-based fluorescent paints for advanced photocatalytic systems

    NASA Astrophysics Data System (ADS)

    Young Park, So; Uk Lee, Hyun; Lee, Young-Chul; Choi, Saehae; Hyun Cho, Dae; Sik Kim, Hee; Bang, Sunghee; Seo, Soonjoo; Chang Lee, Soon; Won, Jonghan; Son, Byung-Chul; Yang, Mino; Lee, Jouhahn

    2015-07-01

    Fluorescent carbon nanomaterials, especially zero-dimensional (0D) carbon nanodots (CDs), are widely used in broad biological and optoelectronic applications. CDs have unique characteristics such as strong fluorescence, biocompatibility, sun-light response, and capability of mass-production. Beyond the previous green CD obtained from harmful natural substances, we report a new type of fluid-based fluorescent CD paints (C-paints) derived from polyethylene glycol (PEG; via simple ultrasound irradiation at room temperatures) and produced in quantum yields of up to ~14%. Additionally, C-paints possess a strong, UV- and visible-light-responsive photoluminescent (PL) property. Most especially, C-paints, by incorporation into a photocatalytic system, show additional roles in the emission of fluorescent light for activation of TiO2 nanoparticles (NPs) and the resultant detoxification of most organic dyes, thus further enabling embarkation in advanced water purification.

  7. Actively controlled thin-shell space optics

    NASA Astrophysics Data System (ADS)

    Denoyer, Keith K.; Flint, Eric M.; Main, John A.; Lindler, Jason E.

    2003-08-01

    Increasingly, scientific and military missions require the use of space-based optical systems. For example, new capabilities are required for imaging terrestrial like planets, for surveillance, and for directed energy applications. Given the difficulties in producing and launching large optics, it is doubtful that refinements of conventional technology will meet future needs, particularly in a cost-effective manner. To meet this need, recent research has been investigating the feasibility of a new class of ultra-lightweight think-skin optical elements that combine recent advances in lightweight thermally formed materials, active materials, and novel sensing and control architectures. If successful, the approach may lead to an order of magnitude reduction in space optics areal density, improved large scale manufacturing capability, and dramatic reductions in manufacturing and launch costs. In a recent effort, a one meter thin-film mirror like structure was fabricated. This paper provides an overview of tools used to model and simulate this structure as well as results from structural dynamic testing. In addition, progress in the area of non-contact global shape control using smart materials is presented.

  8. High performance composites with active stiffness control.

    PubMed

    Tridech, Charnwit; Maples, Henry A; Robinson, Paul; Bismarck, Alexander

    2013-09-25

    High performance carbon fiber reinforced composites with controllable stiffness could revolutionize the use of composite materials in structural applications. Here we describe a structural material, which has a stiffness that can be actively controlled on demand. Such a material could have applications in morphing wings or deployable structures. A carbon fiber reinforced-epoxy composite is described that can undergo an 88% reduction in flexural stiffness at elevated temperatures and fully recover when cooled, with no discernible damage or loss in properties. Once the stiffness has been reduced, the required deformations can be achieved at much lower actuation forces. For this proof-of-concept study a thin polyacrylamide (PAAm) layer was electrocoated onto carbon fibers that were then embedded into an epoxy matrix via resin infusion. Heating the PAAm coating above its glass transition temperature caused it to soften and allowed the fibers to slide within the matrix. To produce the stiffness change the carbon fibers were used as resistance heating elements by passing a current through them. When the PAAm coating had softened, the ability of the interphase to transfer load to the fibers was significantly reduced, greatly lowering the flexural stiffness of the composite. By changing the moisture content in PAAm fiber coating, the temperature at which the PAAm softens and the composites undergo a reduction in stiffness can be tuned. PMID:23978266

  9. Alkali Silicate Vehicle Forms Durable, Fireproof Paint

    NASA Technical Reports Server (NTRS)

    Schutt, John B.; Seindenberg, Benjamin

    1964-01-01

    The problem: To develop a paint for use on satellites or space vehicles that exhibits high resistance to cracking, peeling, or flaking when subjected to a wide range of temperatures. Organic coatings will partially meet the required specifications but have the inherent disadvantage of combustibility. Alkali-silicate binders, used in some industrial coatings and adhesives, show evidence of forming a fireproof paint, but the problem of high surface-tension, a characteristic of alkali silicates, has not been resolved. The solution: Use of a suitable non-ionic wetting agent combined with a paint incorporating alkali silicate as the binder.

  10. Diffusion Time-Scale of Porous Pressure-Sensitive Paint

    NASA Technical Reports Server (NTRS)

    Liu, Tianshu; Teduka, Norikazu; Kameda, Masaharu; Asai, Keisuke

    2001-01-01

    Pressure-sensitive paint (PSP) is an optical pressure sensor that utilizes the oxygen quenching of luminescence. PSP measurements in unsteady aerodynamic flows require fast time response of the paint. There are two characteristic time-scales that are related to the time response of PSP. One is the luminescent lifetime representing an intrinsic physical limit for the achievable temporal resolution of PSP. Another is the time-scale of oxygen diffusion across the PSP layer. When the time-scale of oxygen diffusion is much larger than the luminescent lifetime, the time response of PSP is controlled by oxygen diffusion. In a thin homogenous polymer layer where diffusion is Fickian, the oxygen concentration 1021 can be described by the diffusion equation in one-dimension.

  11. INJECTION PAINTING OPTIMIZATION WITH FUZZY LOGIC EXPERT SYSTEM.

    SciTech Connect

    BEEBE-WANG,J.; TANG,J.

    2001-06-18

    Optimizing transverse particle distributions in the accumulator ring is one of most important factors to the future performance of the Spallation Neutron Source (SNS) [l]. This can only be achieved by optimizing the injection bumps that paint the beam in phase space. The process is complex due to the vague distribution inputs and the multiple optimization goals. Furthermore, the priority of the optimization criteria could change at different operational stages. We propose optimizing transverse phase space painting with fuzzy logic and present our initial studies toward that end. The focus of this paper is on how the problem can be solved with a Fuzzy Logic (FL) expert system through the creation of a set of rules that can be applied by the system. Various particle distributions, from computer simulations, are analyzed with FL and the results are compared and discussed. Finally, a run-time optimization control system is proposed.

  12. 24 CFR 200.800 - Lead-based paint.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Lead-based paint. 200.800...

  13. 24 CFR 35.135 - Use of paint containing lead.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Use of paint containing lead....

  14. 24 CFR 35.135 - Use of paint containing lead.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Use of paint containing lead....

  15. 24 CFR 598.408 - Lead-based paint requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DESIGNATIONS Post-Designation Requirements § 598.408 Lead-based paint requirements. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based Paint Hazard Reduction Act of... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Lead-based paint requirements....

  16. 24 CFR 200.800 - Lead-based paint.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Lead-based paint. 200.800...

  17. 24 CFR 35.135 - Use of paint containing lead.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Use of paint containing lead....

  18. 24 CFR 35.135 - Use of paint containing lead.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Use of paint containing lead....

  19. 24 CFR 598.408 - Lead-based paint requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... DESIGNATIONS Post-Designation Requirements § 598.408 Lead-based paint requirements. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based Paint Hazard Reduction Act of... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Lead-based paint requirements....

  20. 24 CFR 200.800 - Lead-based paint.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Lead-based paint. 200.800...

  1. 24 CFR 200.800 - Lead-based paint.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Lead-Based Paint Poisoning Prevention § 200.800 Lead-based paint. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Lead-based paint. 200.800...

  2. 24 CFR 35.135 - Use of paint containing lead.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Use of paint containing lead....

  3. 24 CFR 598.408 - Lead-based paint requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... DESIGNATIONS Post-Designation Requirements § 598.408 Lead-based paint requirements. The Lead-Based Paint Poisoning Prevention Act (42 U.S.C. 4821-4846), the Residential Lead-Based Paint Hazard Reduction Act of... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Lead-based paint requirements....

  4. Incite Their Interest with a Collaborative Painting Project

    ERIC Educational Resources Information Center

    Woodcock, Jo

    2011-01-01

    This article describes a collaborative painting project that allows first- through third-grade students to work with partners to create a four-inch square of a group painting and learn the basics of mixing paints to produce lights and darks, and tints and shades. One by one, the students worked on the painting in their free time. The author kept a…

  5. Organogel formulations for the cleaning of easel paintings

    NASA Astrophysics Data System (ADS)

    Baglioni, Piero; Bonelli, Nicole; Chelazzi, David; Chevalier, Aurelia; Dei, Luigi; Domingues, Joana; Fratini, Emiliano; Giorgi, Rodorico; Martin, Morgane

    2015-11-01

    Gels are particularly useful for the cleaning of works of art, as they allow the controlled delivery of cleaning fluids on solvent-sensitive substrates such as easel paintings. Owing to the presence of covalent cross-links between the polymer chains, chemical gels exhibit mechanical properties that allow their easy handling and their residue-free removal from artistic surfaces after the cleaning intervention. Organogels based on the cross-linking of methyl methacrylate (MMA) can be prepared as loaded with solvents for the controlled removal of unwanted layers from the surface of canvas paintings. Here, we propose MMA-based organogels obtained by solubilizing MMA in pure organic solvents (e.g., ethyl acetate, butyl acetate and ketones) and using a dimethacrylate cross-linker. The uptake/release behavior of the gels has been investigated, and their mesoporosity has been characterized through small-angle X-ray scattering. Finally, the gels have been used for the removal of historical varnishes from canvas painting samples, checking the absence of gel residues with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR).

  6. [Study of Paints and Drawing Techniques of Fine Brushwork Yunlong Ripples Painting in Qing Dynasty].

    PubMed

    Hao, Sheng-cai; Shi, Ji-long; Wang, Ji-gang; He, Qiu-ju; Qi, Xiao-kun; Zhou, Zhong; Zhou, Wen-hua

    2016-02-01

    In order to study the paints and techniques of decorative patterns of dragon among clouds and water waves, the materials based on a Qing Dynasty meticulous painting were measured by three-dimensional video microscopy, Raman microscopy and energy dispersive X-ray fluorescence spectroscopy. The results showed that the green clothes was firstly colored by Paris green, the decorative patterns of dragon among clouds and water waves were then painted by hematite, the edge was delineated by brass powder at last. The dark yellow area within the decorative patterns was presented due to the interaction of green and red paints. In addition, ultramarine blue was checked in the painting. According to the first synthesized time of ultramarine blue and Paris green, we can make sure the time limit of the painting finished. PMID:27209755

  7. Robust controllers for the Middeck Active Control Experiment using Popov controller synthesis

    NASA Technical Reports Server (NTRS)

    How, Jonathan P.; Hall, Steven R.

    1993-01-01

    Recent work in robust control with real parameter uncertainties has focused on absolute stability and its connections to real mu theory. In particular, the research has investigated the Popov stability criterion and its associated Lur'e-Postnikov Liapunov functions. State space representations of this Popov stability analysis tests are included in an H2 design formulation to provide a powerful technique for robust controller synthesis. This synthesis approach uses a state space optimization procedure to design controllers that minimize an overbound of an H2 cost functional and satisfy stability analysis tests based on the Popov multiplier. The controller and stability multiplier coefficients are optimized simultaneously, which avoids the iteration and curve-fitting procedures required by the D-K algorithm of mu synthesis. While previous work has demonstrated this synthesis approach on benchmark control problems, the purpose of this paper is to use Popov controller synthesis to design robust compensators for the Middeck Active Control Experiment (MACE).

  8. Neutron-induced autoradiography used in the investigation of modern pigments in paintings of known composition

    SciTech Connect

    Aderhold, H.C.; Taft, W.S.

    1992-07-01

    Neutron-Induced Autoradiography is an effective analytical technique for mapping the location of a number of specified pigments in paintings. Most paintings which have been examined through neutron-induced autoradiography to date were painted prior to the introduction of the most common of modern pigments. By understanding die nuclear properties of these pigments, as revealed by this technique, a more informed analysis of modem paintings may result This investigation is part of an ongoing program to develop case studies for presentation to an undergraduate class at Cornell University, 'Art, Isotopes and Analysis'. We have found that this technique is a graphic and effective method of presenting nuclear reactions and radioactivity to non-specialists. Sample paintings are produced using pigments of known composition. A sequence of discreet layers, each a separate image, is documented in order to establish a reference for accurately interpreting the autoradiographs. The painting is then activated in the Cornell TRIGA reactor and a series of autoradiographs produced Gamma spectra taken before and after each film exposure gives us detailed information on which radioisotopes (and therefore, which pigments), are active. (author)

  9. Biodegradation of paint stripper solvents in a modified gas lift loop bioreactor

    SciTech Connect

    Vanderberg-Twary, L.; Steenhoudt, K.; Travis, B.J.; Hanners, J.L.; Foreman, T.M.; Brainard, J.R.

    1997-07-05

    Paint stripping wastes generated during the decontamination and decommissioning of former nuclear facilities contain paint stripping organics (dichloromethane, 2-propanol, and methanol) and bulk materials containing paint pigments. It is desirable to degrade the organic residues as part of an integrated chemical-biological treatment system. The authors have developed a modified gas lift loop bioreactor employing a defined consortium of Thodococcus rhodochrous strain OFS and Hyphomicrobium sp. DM-2 that degrades paint stripper organics. Mass transfer coefficients and kinetic constants for biodegradation in the system were determined. It was found that transfer of organic substrates from surrogate waste into the air and further into the liquid medium in the bioreactor were rapid processes, occurring within minutes. Monod kinetics was employed to model the biodegradation of paint stripping organics. Analysis of the bioreactor process was accomplished with BIOLAB, a mathematical code that simulates coupled mass transfer and biodegradation processes. This code was used to fit experimental data to monod kinetics and to determine kinetic parameters. The BIOLAB code was also employed to compare activities in the bioreactor of individual microbial cultures to the activities of combined cultures in the bioreactor. This code is of benefit for further optimization and scale-up of the bioreactor for treatment of paint stripping and other volatile organic wastes in bulk materials.

  10. Formula for the Removal and Remediation of Polychlorinated Biphenyls in Painted Structures

    NASA Technical Reports Server (NTRS)

    Quinn, Jacqueline; Loftin, Kathleen; Geiger, Cherie

    2010-01-01

    An activated metal treatment system (AMTS) removes and destroys polychlorinated biphenyls (PCBs) found in painted structures or within the binding or caulking material on structures. It may be applied using a "paint-on and wipe-off" process that leaves the structure PCB-free and virtually unaltered in physical form. AMTS is used in conjunction with a solvent solution capable of donating hydrogen atoms. AMTS as a treatment technology has two functions: first, to extract PCBs from the material, and second, to degrade the extracted PCBs. The process for removing PCBs from structures is accomplished as an independent step to the degradation process. The goal is to extract the PCBs out of the paint, without destroying the paint, and to partition the PCBs into an environmentally friendly solvent. The research to date indicates this can be accomplished within the first 24 hours of AMTS contact with the paint. PCBs are extremely hydrophobic and prefer to be in the AMTS over the hardened paint or binder material. The solvent selected must be used to open, but not to destroy, the paint s polymeric lattice structure, allowing pathways for PCB movement out of the paint and into the solvent. A number of solvent systems were tested and are available for use within the AMTS. The second process of the AMTS is the degradation or dehalogenation of the PCBs. The solvent selection for this process is limited to solvents that are capable of donating a hydrogen atom to the PCB structure. Additional AMTS formulation properties that must be addressed for each site-specific application include viscosity and stability. The AMTS must be thick enough to remain where it is applied. Several thickening agents have been tested. Adding a stabilizing agent ensures that the AMTS will not evaporate and leave unprotected, activated metal exposed. During AMTS formulation testing, a number of reagents were evaluated to ensure the rate of dehalogenation was not inhibited by its addition to the system.

  11. RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT SHOP WAS LOCATED IN THE CLOSEST CORNER OF THE BUILDING. THE SHEET METAL SHOP WAS LOCATED IN THE CORNER OF THE BUILDING ON THE RIGHT. THE RIGGERS LOFT WAS LOCATED IN THE PORTION OF THE BUILDING OUT OF VIEW TO THE LEFT - Rosie the Riveter National Historical Park, Riggers Loft/Paint Shop/Sheet Metal Shop, 1322 Canal Boulevard, Richmond, Contra Costa County, CA

  12. Novel Process for Laser Stain Removal from Archaeological Oil Paintings

    NASA Astrophysics Data System (ADS)

    El-Nadi, Lotfia; El-Feky, Osama; Abdellatif, Galila; Darwish, Sawsan

    2013-03-01

    Some samples of oil paintings (5 × 5 cm) were prepared on wooden panel with four types of fungi commonly encountered on oil paintings were selected for this study. Each of the fungi is associated with different colored stains. Fungus Alternaria tenuis is associated by a dense black stain, Chetomium globosum by a brownish gray stain, Aspergillus flavus by a yellowish stain, and Fusaruim oxysporum by a pinkish stain. Fungi growing on oil paintings affect the surface characteristics by forming a variety of colored patches typically composed of many complex chemical substances that are produced during metabolic processes. These colored stains may be encrusted in spores, present in mycelium or secreted to a substance such as oil paintings surfaces. While the fungal stains can sometimes be extracted with appropriate solvents, there are some stains that resist solvent extraction entirely. Developing new solvent system that might attack the paint structure, and is time consuming and requires a great deal of trial and error. Mechanical stain removal is also problematic in that it often produces abrasion of the surface, markedly deteriorating the artwork, and is extra ordinarily fine and tedious. For these reasons, we decided to examine an alternative physical technique as a new approach to deal with stain removal. Since the stains are due to the existence of fungi, we thought it a good idea to remove them by singlet oxygen. We applied the photo dynamic process through which the fungi stains were covered with organic dye derivatives in solution under controlled illumination in the lab. The samples were then irradiated by low power Laser light from a He-Ne laser, the dye will be photodecomposed and produce singlet oxygen. We report in this work the results obtained as a function of: - The concentration and types of the organic dye in solution, - The presence of certain amounts of liquids added to the solution, - The scanning speed of the laser beam on the sample surface

  13. Thermal spray removal of lead-based paint from the viaduct bridge at Rock Island Arsenal, IL. Final report

    SciTech Connect

    Boy, J.H.; Weber, R.A.; Kumar, A.

    1998-06-01

    This report documents a field demonstration at the Rock Island Arsenal, IL, that validated the thermal spray vitrification (TSV) process as a safe and effective technique for removing lead-based paint from a steel bridge. Specially formulated glass was applied in a molten state to painted steel using a conventional thermal spray application system. The molten glass reacts with the paint, and encapsulates the lead. The cooled glass readily cracks and falls off, removing the paint. After onsite remelting of the glass waste to complete the encapsulation process, the final waste product is chemically inert and may be disposed of in a regular landfill. The Illinois Environmental Protection Agency, Division of Air Pollution Control determined that the glass remelt process could be considered a paint-removal operation for which no air quality permit was required.

  14. Soil paints as a tool to increase soil awareness among different publics

    NASA Astrophysics Data System (ADS)

    Muggler, Cristine C.

    2013-04-01

    The Earth Sciences Museum Alexis Dorofeef at the Soil Department of the Federal University of Viçosa (UFV), Minas Gerais, Brazil, was opened in 1993 with a goal to sensibilize its public about soils, besides the usual geological approach. Since its opening, many of the guided visits include an activity of painting or modelling with soil materials. Such activities have the aim to familiarize people about the properties of soils, in special, colours, consistencies and textures in a joyful way. The tropical soils of the region offer a wide diversity of colours and textures that wonders and intrigues people in general. With time, some of the visitors as well as the museum team started to make trials how it would be to paint walls with the soil paints. It became a project to develop a social technology since the soil paints could be easily prepared and used at much lower cost than industrial paints. Additionally, to have the house painted offers populations living in the peripheral areas of the town of Viçosa the possibility to increase their quality of life by embellishing the surroundings where they live. After the basic know how was developed, the Museum and other extension groups of UFV started to train people in doing it. A brochure was published and the technique spread rapidly in the region and to other parts of the state and country as well. The workshops on soil paint preparation and use, offered by the Museum are open to a much diversified public: school children, professional painters, farmers of the landless movement, etc. The workshops have been taken as an opportunity to approach soils and its importance to life and environment. They start with questions about how people consider and see soils. From this starting point, soil formation processes and soil properties are introduced and discussed with the group. This is followed by the discussion of landscapes and where the soil materials can be collected and what are the differences to be expected between

  15. Standard Operating Procedure for the Preparation of Lead-Containing Paint Films and Lead-in-Paint Diagnostic Test Materials

    EPA Science Inventory

    This SOP describes the preparation of stand-alone, lead paint films, prepared according to the old paint recipes. Further, this SOP describes the use of these paint films for the preparation of simulated old paints on a variety of substrates. Substrates used included wood, stee...

  16. Open architecture controller activities in Technology Enabling Agile Manufacturing (TEAM)

    NASA Astrophysics Data System (ADS)

    McCue, Howard K.

    1997-01-01

    As part of its manufacturing initiative, TEAM is actively involved in open architecture controller activities. WIthin the TEAM community of members, TEAM is developing an open architecture controller requirements document and an open architecture controller application programming interface document. In addition, TEAM is also evaluating early open architecture controllers in a shop floor environment.

  17. Arthritis in Flemish paintings (1400-1700).

    PubMed Central

    Dequeker, J

    1977-01-01

    A close examination of the hands of people depicted in paintings of the Flemish school showed that in five paintings there were figures with hand lesions resembling those of rhematoid arthritis. Although none of the deformities or swellings are indisputable examples of rheumatoid arthritis, they do at least suggest that the painters must have been confronted with rheumatoid-like lesions in their models. In two other paintings there were signs of rheumatic fever and of temporal arteritis. No arthritic lesions were found in the works of painters of the Italian Renaissance, probably because they are less detailed. The finding of rheumatoid deformities in the Flemish paintings does, however, question the general belief that rheumatoid arthritis is a condition that has arisen relatively recently. Images FIGS 1-2 FIG 3 FIG 4 FIG 5 FIG 6 FIG 7 PMID:324568

  18. Pointillist Watercolor Paintings: Exploring Optical Mixing.

    ERIC Educational Resources Information Center

    Hamwi, Richard

    2001-01-01

    Focuses on the pointillist painting process offering background information about technique and how it can be used in the art classroom. Explores the appropriateness of the process for elementary through secondary school students. Includes educational objectives. (CMK)

  19. Painting a Data-Rich Picture

    ERIC Educational Resources Information Center

    Earl, Lorna; Katz, Steven

    2005-01-01

    Using data for school reform is like painting a series of pictures--pictures that are subtle and capture the nuances of the subject. This is a far cry from drawing stick figures or paint-by-numbers. Imagine the experiences of the French painter Claude Monet as he wandered through his garden at Giverny at different times of the day and year,…

  20. Emission rate modeling and risk assessment at an automobile plant from painting operations

    SciTech Connect

    Kumar, A.; Shrivastava, A.; Kulkarni, A.

    1999-07-01

    Pollution from automobile plants from painting operations has been addressed in the Clean Act Amendments (1990). The estimation of pollutant emissions from automobile painting operation were done mostly by approximate procedures than by actual calculations. The purpose of this study was to develop a methodology for calculating the emissions of the pollutants from painting operation in an automobile plant. Five scenarios involving an automobile painting operation, located in Columbus (Ohio), were studied for pollutant emission and concomitant risk associated with that. In the study of risk, a sensitivity analysis was done using Crystal Ball{reg{underscore}sign} on the parameters involved in risk. This software uses the Monte Carlo principle. The most sensitive factor in the risk analysis was the ground level concentration of the pollutants. All scenarios studied met the safety goal (a risk value of 1 x 10{sup {minus}6}) with different confidence levels. The highest level of confidence in meeting the safety goal was displayed by Scenario 1 (Alpha Industries). The results from the scenarios suggest that risk is associated with the quantity of released toxic pollutants. The sensitivity analysis of the various parameter shows that average spray rate of paint is the most important parameter in the estimation of pollutants from the painting operations. The entire study is a complete module that can be used by the environmental pollution control agencies for estimation of pollution levels and estimation of associated risk. The study can be further extended to other operations in an automobile industry or to different industries.

  1. A quantitative approach to painting styles

    NASA Astrophysics Data System (ADS)

    Vieira, Vilson; Fabbri, Renato; Sbrissa, David; da Fontoura Costa, Luciano; Travieso, Gonzalo

    2015-01-01

    This research extends a method previously applied to music and philosophy (Vilson Vieira et al., 2012), representing the evolution of art as a time-series where relations like dialectics are measured quantitatively. For that, a corpus of paintings of 12 well-known artists from baroque and modern art is analyzed. A set of 99 features is extracted and the features which most contributed to the classification of painters are selected. The projection space obtained provides the basis to the analysis of measurements. These quantitative measures underlie revealing observations about the evolution of painting styles, specially when compared with other humanity fields already analyzed: while music evolved along a master-apprentice tradition (high dialectics) and philosophy by opposition, painting presents another pattern: constant increasing skewness, low opposition between members of the same movement and opposition peaks in the transition between movements. Differences between baroque and modern movements are also observed in the projected "painting space": while baroque paintings are presented as an overlapped cluster, the modern paintings present minor overlapping and are disposed more widely in the projection than the baroque counterparts. This finding suggests that baroque painters shared aesthetics while modern painters tend to "break rules" and develop their own style.

  2. Aerodynamic Control using Distributed Active Bleed

    NASA Astrophysics Data System (ADS)

    Kearney, John; Glezer, Ari

    2015-11-01

    The global aerodynamic loads on a stationary and pitching airfoil at angles of attack beyond the static and dynamic stall margins, respectively are controlled in wind tunnel experiments using regulated distributed bleed driven by surface pressure differences. High-speed PIV and proper orthogonal decomposition of the vorticity flux on the static airfoil show that the bleed engenders trains of discrete vortices that advect along the surface and are associated with a local instability that is manifested by a time-averaged bifurcation of the vorticity layer near the bleed outlets and alters the vorticity flux over the airfoil and thereby the aerodynamic loads. Active bleed is used on a dynamically pitching airfoil (at reduced frequencies up to k = 0.42) to modulate the evolution of vorticity concentrations during dynamic stall. Time-periodic bleed improved the pitch stability by reducing adverse pitching moment (``negative damping'') that can precipitate structural instabilities. At the same time, the maintains the cycle-average loads to within 5% of the base flow levels by segmenting the vorticity layer during upstroke and promoting early flow attachment during downstroke segments of the pitch cycle. Supported by Georgia Tech VLRCOE.

  3. Interaction of femtosecond laser pulses with tempera paints

    NASA Astrophysics Data System (ADS)

    Gaspard, Solenne; Oujja, Mohamed; Moreno, Pablo; Méndez, Cruz; García, Ana; Domingo, Concepción; Castillejo, Marta

    2008-12-01

    For the implementation of femtosecond (fs) laser cleaning methodologies of light-sensitive substrates as those encountered in artistic paintings, the interaction between fs laser pulses and painting components has to be well characterized. In this work, the modifications induced by fs laser irradiation of paints are examined in unvarnished aged model temperas. Irradiation at fluences below or above the ablation thresholds by 120 fs pulses at 795 nm from a Ti:Sapphire laser of unpigmented and traditional artist's pigment temperas (cinnabar and chrome yellow) is shown to result in various degrees of discolouration and changes of the laser-induced fluorescence signal. Fourier transform FT-Raman (at 1064 nm) and micro-Raman (at 785 nm) spectroscopic measurements were carried out to assess the changes induced. Noticeable modifications of the Raman bands of the pigments are absent while build-up of extra bands of amorphous carbon (indicative of carbonization or charring) does not take place, in contrast with previous observations upon irradiation with 248 nm, 25 ns pulses. It is concluded that IR fs irradiation provides a high degree of control over the induced modifications, a feature of interest in the design of new laser restoration schemes.

  4. Do Roads Reduce Painted Turtle (Chrysemys picta) Populations?

    PubMed Central

    Dorland, Alexandra; Rytwinski, Trina; Fahrig, Lenore

    2014-01-01

    Road mortality is thought to be a leading cause of turtle population decline. However, empirical evidence of the direct negative effects of road mortality on turtle population abundance is lacking. The purpose of this study was to provide a strong test of the prediction that roads reduce turtle population abundance. While controlling for potentially confounding variables, we compared relative abundance of painted turtles (Chrysemys picta) in 20 ponds in Eastern Ontario, 10 as close as possible to high traffic roads (Road sites) and 10 as far as possible from any major roads (No Road sites). There was no significant effect of roads on painted turtle relative abundance. Furthermore, our data do not support other predictions of the road mortality hypothesis; we observed neither a higher relative frequency of males to females at Road sites than at No Road sites, nor a lower average body size of turtles at Road than at No Road sites. We speculate that, although roads can cause substantial adult mortality in turtles, other factors, such as release from predation on adults and/or nests close to roads counter the negative effect of road mortality in some populations. We suggest that road mitigation for painted turtles can be limited to locations where turtles are forced to migrate across high traffic roads due, for example, to destruction of local nesting habitat or seasonal drying of ponds. This conclusion should not be extrapolated to other species of turtles, where road mortality could have a larger population-level effect than on painted turtles. PMID:24858065

  5. Fabrication and Performance of Organic Thin Film Solar Cells Using the Brush Painting Method

    NASA Astrophysics Data System (ADS)

    Ishihara, Hirohumi; Kojima, Kenzo; Mizutani, Teruyoshi; Ochiai, Shizuyasu

    As organic solar thin films fabricated by an active layer of organic materials are economical, lightweight, and flexible, as well as facilitating processing, organic solar cells have attracted considerable attention within the past few decades as a clean energy source. With this in mind, there have been global investigations and studies of the power conversion efficiency (PCE) within organic solar cells. In organic thin-film solar cells, the effect of the performance is not only dependent on an adopted active material but also the molecular orientation on the electrode. Using the mixed solution of Poly (3-hexylthiophene) and PCBM, both dissolved by solvent, an organic thin film is fabricated using the paint method (The conceptual diagram of the paint method is shown in Fig. 1) The form of the thin film was evaluated, an organic thin-film solar cell using the paint method for the active layer was made, and its performance was evaluated and examined. Using the mixed solution of Poly(3-hexylthiophene) and PCBM, both dissolved by solvent, an organic thin film is fabricated using the paint method (The conceptual diagram of the paint method is shown in Fig. 1) The morphology of the thin film was evaluated using an AFM image, UV/vis spectra, and so forth. Based on these data, an organic thin-film solar cell that used the paint method for the active layer was fabricated, and the performance was evaluated and examined. For the organic thin film solar cell fabricated using the brush painting method, the open-circuit voltage (Voc) is 0.41 V, the short circuit current density (Jsc) is 2.07 mA/cm2, and the fill factor is 0.34. The efficiency η of PCE becomes 0.29%.

  6. Active control of buckling of flexible beams

    NASA Technical Reports Server (NTRS)

    Baz, A.; Tampe, L.

    1989-01-01

    Mathematical models are presented that simulate the dynamic characteristics of shape memory alloy actuators made of nickel-titanium alloy (Nitinol) controlling the buckling of compressive structural members. A closed-loop computer-controlled system has been designed, based on the proposed mathematical models, and has been implemented to control the buckling of simple beams. The performance of the computer-controlled system is evaluated experimentally and compared with the theoretical predictions to validate the developed models. The results emphasized the importance of buckling control and suggest the potential of shape memory alloy actuators as attractive means for controlling structural deformation in a simple and reliable way.

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, PAINT OVERSPRAY ARRESTOR, PUROLATOR PRODUCTS AIR FILTRATION COMPANY, DMK804404 AND PB2424

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, PAINT OVERSPRAY ARRESTOR KOCH FILTER CORPORATION MULTI-SAK 6FZ159-S

    EPA Science Inventory

    Paint overspray arrestors (POAs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the particle filtration efficiency as a function of size for particles smaller than 10 micrometers. The APCT Verification Center...

  9. DLVO THEORY APPLIED TO TIO2 PIGMENTS AND OTHER MATERIALS IN LATEX PAINTS. (R828081E01)

    EPA Science Inventory

    Understanding how a paint formulation translates into comparative numbers of particles, how the spacing between particles compares to their size and what controls their stabilization mechanisms improves efficient formulation design. The application of Derjaguin, Landau, Verwey...

  10. Active controllers and the time duration to learn a task

    NASA Technical Reports Server (NTRS)

    Repperger, D. W.; Goodyear, C.

    1986-01-01

    An active controller was used to help train naive subjects involved in a compensatory tracking task. The controller is called active in this context because it moves the subject's hand in a direction to improve tracking. It is of interest here to question whether the active controller helps the subject to learn a task more rapidly than the passive controller. Six subjects, inexperienced to compensatory tracking, were run to asymptote root mean square error tracking levels with an active controller or a passive controller. The time required to learn the task was defined several different ways. The results of the different measures of learning were examined across pools of subjects and across controllers using statistical tests. The comparison between the active controller and the passive controller as to their ability to accelerate the learning process as well as reduce levels of asymptotic tracking error is reported here.

  11. Leisure time activities related to carcinogen exposure and lung cancer risk in never smokers. A case-control study

    SciTech Connect

    Ruano-Ravina, Alberto; García-Lavandeira, José Antonio; Torres-Durán, María; Prini-Guadalupe, Luciana; Parente-Lamelas, Isaura; Leiro-Fernández, Virginia; Montero-Martínez, Carmen; González-Barcala, Francisco Javier; Golpe-Gómez, Antonio; Martínez, Cristina; Castro-Añón, Olalla; Mejuto-Martí, María José; and others

    2014-07-15

    We aim to assess the relationship between leisure time activities related to exposure to carcinogenic substances and lung cancer risk in a hospital-based case-control study performed in never smokers. We included never smoking cases with anatomopathologically confirmed lung cancer and never smoking controls undergoing trivial surgery, at 8 Spanish hospitals. The study was conducted between January 2011 and June 2013. Participants were older than 30 and had no previous neoplasms. All were personally interviewed focusing on lifestyle, environmental tobacco smoke exposure, occupational history and leisure time activities (including duration of such activities). Results were analyzed through logistic regression and adjusted also by residential radon and education level. We included 513 never smokers, 191 cases and 322 controls. The OR for those performing the studied leisure time activities was 1.43 (95%CI 0.78–2.61). When we restricted the analysis to those performing do-it-yourself activities for more than 10 years the OR was 2.21 (95%CI 0.93–5.27). Environmental tobacco smoke exposure did not modify this association. The effect for the different lung cancer histological types was very close to significance for adenocarcinoma but only when these activities were performed for more than 10 years. We encourage health professionals to recommend protective measures for those individuals while performing these hobbies to reduce the risk of lung cancer. - Highlights: • Some leisure time activities are associated with the exposure to carcinogenic substances. • These activities are model-making, painting (artistic or not), furniture refinishing or wood working. • Few studies have assessed lung cancer risk due to these hobbies and none in never-smokers. • Leisure activities related to exposure to carcinogenic substances present higher lung cancer risk. • The risk is higher when these activities are performed for more than 10 years.

  12. Quasi-modal vibration control by means of active control bearings

    NASA Technical Reports Server (NTRS)

    Nonami, K.; Fleming, D. P.

    1986-01-01

    This paper investigates a design method of an active control bearing system with only velocity feedback. The study provides a new quasi-modal control method for a control system design of an active control bearing system in which feedback coefficients are determined on the basis of a modal analysis. Although the number of sensors and actuators is small, this quasi-modal control method produces a control effect close to an ideal modal control.

  13. High-resolution colorimetric imaging of paintings

    NASA Astrophysics Data System (ADS)

    Martinez, Kirk; Cupitt, John; Saunders, David R.

    1993-05-01

    With the aim of providing a digital electronic replacement for conventional photography of paintings, a scanner has been constructed based on a 3000 X 2300 pel resolution camera which is moved precisely over a 1 meter square area. Successive patches are assembled to form a mosaic which covers the whole area at c. 20 pels/mm resolution, which is sufficient to resolve the surface textures, particularly craquelure. To provide high color accuracy, a set of seven broad-band interference filters are used to cover the visible spectrum. A calibration procedure based upon a least-mean-squares fit to the color of patches from a Macbeth Colorchecker chart yields an average color accuracy of better than 3 units in the CMC uniform color space. This work was mainly carried out as part of the VASARI project funded by the European Commission's ESPRIT program, involving companies and galleries from around Europe. The system is being used to record images for conservation research, for archival purposes and to assist in computer-aided learning in the field of art history. The paper will describe the overall system design, including the selection of the various hardware components and the design of controlling software. The theoretical basis for the color calibration methodology is described as well as the software for its practical implementation. The mosaic assembly procedure and some of the associated image processing routines developed are described. Preliminary results from the research will be presented.

  14. Low Activity Waste Feed Process Control Strategy

    SciTech Connect

    STAEHR, T.W.

    2000-06-14

    The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system.

  15. Active flutter control for flexible vehicles, volume 1

    NASA Technical Reports Server (NTRS)

    Mahesh, J. K.; Garrard, W. L.; Stones, C. R.; Hausman, P. D.

    1979-01-01

    An active flutter control methodology based on linear quadratic gaussian theory and its application to the control of a super critical wing is presented. Results of control surface and sensor position optimization are discussed. Both frequency response matching and residualization used to obtain practical flutter controllers are examined. The development of algorithms and computer programs for flutter modeling and active control design procedures is reported.

  16. Design and Application of The Painting Material Supply System of The Painting Robot for Steel Products

    NASA Astrophysics Data System (ADS)

    Miyawaki, Kunio; Hisayasu, Azuma; Mori, Tsunehito; Miyazaki, Tatsuo; Nakashima, Yoshio

    With the increase of painting works and the decrease of skilled workers, the demand for robot painting of the large-scale steel product is rapidly increasing. But there are many technical problems in the development of the painting robot for this use. The collision between a robot and a work-piece is one of the most important problems, because the robot operates in a small space of a work-piece. Above all, the collision of the painting material supply hose with painted film on a work-piece is very serious. To avoid the hose collision, we propose an in-line type of paint supply mechanism using swivel joints. The key point in this system is the sealing performance and its durability, and we propose the piping system with compliance to strengthen the sealing performance. In this paper, the design method of this system is discussed on the basis of the analysis of the fluctuatinal elastic deformation of a O-ring in the swivel joint. We produced a prototype of the painting robot with the in-line system designed by this method. Application of this robot to the painting of ship-hull block is also discussed. Results from this application show the effectiveness of the in-line system.

  17. Application of the Polymer Based Pressure Sensitive Paint for Qualitative and Quantitative Flow Visualisation in a Transonic Flow

    NASA Astrophysics Data System (ADS)

    Lo, K. H.; Zare-Behtash, H.; Kontis, K.; Qin, N.

    Surface pressure measurement by Pressure Sensitive Paint (PSP) becomes an active area of research in the engineering industry. Conventional pressure measurement techniques require to incoporate pressure taps within the model.

  18. A modified F/A-18 in a distinctive red, white and blue paint scheme was showcased during formal roll

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A modified F/A-18 in a distinctive red, white and blue paint scheme was showcased during formal rollout ceremonies for the Active Aeroelastic Wing flight research program at NASA's Dryden Flight Research Center on March 27, 2002.

  19. Failure-probability driven dose painting

    SciTech Connect

    Vogelius, Ivan R.; Håkansson, Katrin; Due, Anne K.; Aznar, Marianne C.; Kristensen, Claus A.; Rasmussen, Jacob; Specht, Lena; Berthelsen, Anne K.; Bentzen, Søren M.

    2013-08-15

    Purpose: To demonstrate a data-driven dose-painting strategy based on the spatial distribution of recurrences in previously treated patients. The result is a quantitative way to define a dose prescription function, optimizing the predicted local control at constant treatment intensity. A dose planning study using the optimized dose prescription in 20 patients is performed.Methods: Patients treated at our center have five tumor subvolumes from the center of the tumor (PET positive volume) and out delineated. The spatial distribution of 48 failures in patients with complete clinical response after (chemo)radiation is used to derive a model for tumor control probability (TCP). The total TCP is fixed to the clinically observed 70% actuarial TCP at five years. Additionally, the authors match the distribution of failures between the five subvolumes to the observed distribution. The steepness of the dose–response is extracted from the literature and the authors assume 30% and 20% risk of subclinical involvement in the elective volumes. The result is a five-compartment dose response model matching the observed distribution of failures. The model is used to optimize the distribution of dose in individual patients, while keeping the treatment intensity constant and the maximum prescribed dose below 85 Gy.Results: The vast majority of failures occur centrally despite the small volumes of the central regions. Thus, optimizing the dose prescription yields higher doses to the central target volumes and lower doses to the elective volumes. The dose planning study shows that the modified prescription is clinically feasible. The optimized TCP is 89% (range: 82%–91%) as compared to the observed TCP of 70%.Conclusions: The observed distribution of locoregional failures was used to derive an objective, data-driven dose prescription function. The optimized dose is predicted to result in a substantial increase in local control without increasing the predicted risk of toxicity.

  20. [Gustav Klimt and the field of medicine. Painting of the medical faculty--relationship with the Zuckerkandl family].

    PubMed

    Schultheiss, D

    2007-09-01

    The art nouveau painter Gustav Klimt (1862-1918), a cofounder of the Vienna Secession movement, was commissioned in 1894 to prepare three ceiling paintings for the Great Hall of the University of Vienna portraying the faculties of "Philosophy," "Medicine," and "Jurisprudence." After the first public presentations of these paintings starting in 1900 fierce protests erupted since the artist had not painted a historical allegory but rather had created a modern symbolic picture in the Secessionism style. The controversy over the so-called faculty paintings escalated to the point that in 1905 Klimt irrevocably distanced himself from the commission and bought back his pictures from the state. The paintings were later purchased by the Austrian Gallery and in 1943 placed in storage in Lower Austria at the Immendorf Castle where they were destroyed by a fire in May 1945 when the German troops withdrew. Besides Klimt's preliminary sketches, only black and white photographs of the three paintings now exist as well as a color reproduction of the section depicting Hygieia from the "Medicine" painting. Due to the public rejection of the faculty paintings, Gustav Klimt broke away from official government-commissioned art and focused on private clients from among Viennese society. One of these intensive associations was with the anatomist Emil Zuckerkandl and his wife Berta, who was very active in cultural affairs. During the dispute over the faculty paintings, Zuckerkandl was one of the few university professors who signed a petition in favor of retaining the paintings. His brother, the industrialist Victor Zuckerkandl, was one of the major collectors and patrons of Secessionist art. The third brother, the well-known urologist Otto Zuckerkandl (1861-1921), president of the Second and Third Congresses of the German Society of Urology in 1909 and 1911, was also in close contact with Klimt. A portrait of his wife Amalie was a work in progress between 1913 and 1917, but it remained