Science.gov

Sample records for d-t operation

  1. Implementation of the {alpha}-CHERS diagnostic for D-T operation of TFTR

    SciTech Connect

    McKee, G.R.; Fonck, R.J.; Stratton, F.K.

    1995-03-01

    The {alpha}-CHERS diagnostic is a high throughput charge exchange recombination spectroscopy diagnostic designed to measure the density profile and time evolution of 0-500 keV alpha particles during D-T operation of TFTR. Following successful tests with a prototype ({alpha}-CHERS system, an improved, multi-channel system has been installed for D-T Operation. Three spatial channels may be observed simultaneously, and the spectral resolution of 0.5 nm permits increased alpha energy resolution and improved impurity line identification. More efficient coupling optics between the spectrometer and CCD detectors have increased the light throughput, and radiation shielding has been installed around the detectors and spectrometers to eliminate the neutron/gamma ray noise observed in high power D-D plasmas.

  2. Absolute calibration of TFTR neutron detectors for D-T plasma operation

    SciTech Connect

    Jassby, D.L.; Johnson, L.C.; Roquemore, A.L.; Strachan, J.D.; Johnson, D.W.; Medley, S.S.; Young, K.M.; Barnes, C.W.

    1995-03-01

    The two most sensitive TFTR fission-chamber detectors were absolutely calibrated in situ by a D-T neutron generator ({approximately}5 {times} 10{sup 7} n/s) rotated once around the torus in each direction, with data taken at about 45 positions. The combined uncertainty for determining fusion neutron rates, including the uncertainty in the total neutron generator output ({plus_minus}9%), counting statistics, the effect of coil coolant, detector stability, cross-calibration to the current mode or log Campbell mode and to other fission chambers, and plasma position variation, is about {plus_minus}13%. The NE-451 (ZnS) scintillators and {sup 4}He proportional counters that view the plasma in up to 10 collimated sightlines were calibrated by scanning. the neutron generator radially and toroidally in the horizontal midplane across the flight tubes of 7 cm diameter. Spatial integration of the detector responses using the calibrated signal per unit chord-integrated neutron emission gives the global neutron source strength with an overall uncertainty of {plus_minus}14% for the scintillators and {plus_minus}15% for the {sup 4}He counters.

  3. The scientific case for a JET D-T experiment

    SciTech Connect

    Weisen, H.; Sips, A. C. C.; Horton, L. D.; Challis, C. D.; Sharapov, S. E.; Zastrow, K.-D.; Batistoni, P. [EURATOM Collaboration: EFDA-JET Contributors

    2014-08-21

    After the first high power D-T experiment in JET in 1997 (DTE1), when JET was equipped with Carbon PFC's, a proposed second high power (up to ∼40MW) D-T campaign (DTE2) in the current Be/W vessel will address essential operational, technical, diagnostics and scientific issues in support of ITER. These experiments are proposed to minimize the risks to ITER by testing strategies for the management of the in-vessel tritium content, by providing the basis for transferring operational scenarios from non-active operation to D-T mixtures and by addressing the issue of the neutron measurement accuracy. Dedicated campaigns with operation in Deuterium, Hydrogen and Tritium before the D-T campaign proper will allow the investigation of isotope scaling of the H-mode transition, pedestal physics, heat, particle, momentum and impurity transport in much greater detail than was possible in DTE1. The D-T campaign proper will include validations of the baseline ELMy H-Mode scenario, of the hybrid H-mode and advanced tokamak scenarios, as well as the investigation of alpha particle physics and the qualification of ICRH scenarios suitable for D-T operation. This paper reviews the scientific goals of DTE2 together with a summary of the results of DTE1.

  4. The scientific case for a JET D-T experiment

    NASA Astrophysics Data System (ADS)

    Weisen, H.; Sips, A. C. C.; Challis, C. D.; Eriksson, L.-G.; Sharapov, S. E.; Batistoni, P.; Horton, L. D.; Zastrow, K.-D.; EFDA-JET Contributors

    2014-08-01

    After the first high power D-T experiment in JET in 1997 (DTE1), when JET was equipped with Carbon PFC's, a proposed second high power (up to ˜40MW) D-T campaign (DTE2) in the current Be/W vessel will address essential operational, technical, diagnostics and scientific issues in support of ITER. These experiments are proposed to minimize the risks to ITER by testing strategies for the management of the in-vessel tritium content, by providing the basis for transferring operational scenarios from non-active operation to D-T mixtures and by addressing the issue of the neutron measurement accuracy. Dedicated campaigns with operation in Deuterium, Hydrogen and Tritium before the D-T campaign proper will allow the investigation of isotope scaling of the H-mode transition, pedestal physics, heat, particle, momentum and impurity transport in much greater detail than was possible in DTE1. The D-T campaign proper will include validations of the baseline ELMy H-Mode scenario, of the hybrid H-mode and advanced tokamak scenarios, as well as the investigation of alpha particle physics and the qualification of ICRH scenarios suitable for D-T operation. This paper reviews the scientific goals of DTE2 together with a summary of the results of DTE1.

  5. Coherent fluctuations in the initial TFTR D-T experiments

    SciTech Connect

    Fredrickson, E.; Chang, Z.Y.; Budny, R.V.

    1995-03-01

    The initial operation of TFTR with approximately equal power in the tritium and deuterium neutral beam injectors has resulted in the production of fusion power in excess of 9MW and central {beta}{sub {alpha}} > 0.25%. This {beta}{sub {alpha}} is within a factor of 2--3 of the {beta}{sub {alpha}} in projections of ITER performance. Effects of this {alpha} population on TAE modes, sawteeth and fishbone activity are being searched for. The D-T plasmas are also being studied for evidence of changes in MHD activity which might be attributed to the fast {alpha} population. This paper reports on the activity in the Alfven range of frequencies in the D-T plasmas and on detailed measurements of the MHD activity preceding major disruptions in D-D and D-T.

  6. Overview of D-T results from TFTR

    SciTech Connect

    Bell, M.G.; McGuire, K.M.; Arunasalam, V.

    1995-10-01

    Experiments with plasmas having nearly equal concentrations of deuterium and tritium have been carried out on TFTR. To date, the maximum fusion power has been 10.7 MW, using 39.5 MW of neutral-beam heating, in a supershot discharge and 6.7 MW in a high-{beta}{sub p} discharge following a current ramp-down. The fusion power density in the core of the plasma has reached 2.8 MWm{sup {minus}3}, exceeding that expected in the International Thermonuclear Experimental Reactor (ITTER). The energy confinement time, {tau}{sub E}, is observed to increase in D-T, relative to D plasmas, by 20% and the n{sub i}(O){center_dot}{tau}{sub E} product by 55%. The improvement in thermal confinement is caused primarily by a decrease in ion heat conductivity in both supershot and limiter-H-mode discharges. Extensive lithium pellet injection increased the confinement time to 0.27 s and enabled higher current operation in both supershot and high-{beta}{sub p} discharges. First measurements of the confined alpha particles have been performed and found to be in good agreement with TRANSP simulations assuming classical confinement. Measurements of the alpha ash profile have been compared with simulations using particle transport coefficients from helium gas puffing experiments. The loss of energetic alpha particles to a detector at the bottom of the vessel is well described by the first-orbit loss mechanism. No loss due to alpha-particle-driven instabilities has yet been observed. ICRF heating of a D-T plasma, using the second harmonic of tritium, has been demonstrated. D-T experiments on TFTR will continue both to explore the physics underlying the ITER design and to examine some of the physics issues associated with an advanced tokamak reactor.

  7. High-Yield D-T Neutron Generator

    SciTech Connect

    Ludewigt, B.A.; Wells, R.P.; Reijonen, J.

    2006-11-15

    A high-yield D-T neutron generator has been developed for neutron interrogation in homeland security applications such as cargo screening. The generator has been designed as a sealed tube with a performance goal of producing 5 {center_dot} 10{sup 11} n/s over a long lifetime. The key generator components developed are a radio-frequency (RF) driven ion source and a beam-loaded neutron production target that can handle a beam power of 10 kW. The ion source can provide a 100 mA D{sup +}/T{sup +} beam current with a high fraction of atomic species and can be pulsed up to frequencies of several kHz for pulsed neutron generator operation. Testing in D-D operation has been started.

  8. D-T Neutron Skyshine Experiments at JAERI/FNS

    NASA Astrophysics Data System (ADS)

    Nishitani, Takeo; Ochiai, Kentaro; Yoshida, Shigeo; Tanaka, Ryohei; Wakisaka, Masashi; Nakao, Makoto; Sato, Satoshi; Yamauchi, Michinori; Hori, Jun-Ichi; Takahashi, Akito; Kaneko, Jun-Ichi; Sawamura, Teruko

    The D-T neutron skyshine experiments have been carried out at the Fusion Neutronics Source (FNS) of JAERI with the neutron yield of ˜1.7×1011n/s. The concrete thickness of the roof and the wall of a FNS target room are 1.15 and 2 m, respectively. The FNS skyshine port with a size of 0.9 × 0.9 m2 was open during the experimental period.The radiation dose rate outside the target room was measured as far as about 550 m away from the D-T target point with a spherical rem-counter. The highest neutron dose was about 0.5 μSv/hr at a distance of 30 m from the D-T target point and the dose rate was attenuated to 0.002 μSv/hr at a distance of 550 m. The measured neutron dose distribution was analyzed with Monte Carlo code MCNP-4B and a simple line source model. The MCNP calculation overestimates the neutron dose in the distance range larger than 250 m. The neutron spectra were evaluated with a 3He detector with different thickness of polyethylene neutron moderators. Secondary gamma-rays were measured with high purity Ge detectors and NaI scintillation detectors.

  9. Experimental subcritical facility driven by D-D/D-T neutron generator at BARC, India

    NASA Astrophysics Data System (ADS)

    Sinha, Amar; Roy, Tushar; Kashyap, Yogesh; Ray, Nirmal; Shukla, Mayank; Patel, Tarun; Bajpai, Shefali; Sarkar, P. S.; Bishnoi, Saroj

    2015-05-01

    The paper presents design of an experimental subcritical assembly driven by D-D/D-T neutron and preliminary experimental measurements. The system has been developed for investigating the static and dynamic neutronic properties of accelerator driven sub-critical systems. This system is modular in design and it is first in the series of subcritical assemblies being designed. The subcritical core consists of natural uranium fuel with high density polyethylene as moderator and beryllium oxide as reflector. The fuel is embedded in high density polyethylene moderator matrix. Estimated keff of the system is ∼0.89. One of the unique features of subcritical core is the use of Beryllium oxide (BeO) as reflector and HDPE as moderator making the assembly a compact modular system. The subcritical core is coupled to Purnima Neutron Generator which works in D-D and D-T mode with both DC and pulsed operation. It has facility for online source strength monitoring using neutron tagging and programmable source modulation. Preliminary experiments have been carried out for spatial flux measurement and reactivity estimation using pulsed neutron source (PNS) techniques with D-D neutrons. Further experiments are being planned to measure the reactivity and other kinetic parameters using noise methods. This facility would also be used for carrying out studies on effect of source importance and measurement of source multiplication factor ks and external neutron source efficiency φ∗ in great details. Experiments with D-T neutrons are also underway.

  10. D-T neutron generator development for cancer therapy. 1980 annual progress report

    SciTech Connect

    Bacon, F.M.; Walko, R.J.; Bickes, R.W. Jr.; Cowgill, D.F.; Riedel, A.A.; O'Hagan, J.B.

    1980-05-01

    This report summarizes the work completed during the first year of a two-year grant by NCI/HEW to investigate the feasibility of developing a D-T neutron generator for use in cancer therapy. Experiments have continued on the Target Test Facility (TTF) developed during a previous grant to investigate high-temperature metal hydrides for use as target materials. The high voltage reliability of the TTF has been improved so that 200 kV, 200 mA operation is now routine. In recent target tests, the D-D neutron production rate was measured to be > 1 x 10/sup 11//s, a rate that corresponds to a D-T neutron production rate of > 1 x 10/sup 13//s - the desired rate for use in cancer therapy. Deuterium concentration depth profiles in the target, measured during intense ion beam bombardment, show that deuterium is depleted near the surface of the target due to impurities implanted by the ion beam. Recent modifications of the duopigatron ion source to reduce secondary electron damage to the electrodes also improved the ion source efficiency by about 40%. An ultra high vacuum version of the TTF is now being constructed to determine if improved vacuum conditions will reduce ion source impurities to a sufficiently low level that the deuterium near the surface of the target is not depleted. Testing will begin in June 1980.

  11. Compact D-D/D-T neutron generators and their applications

    SciTech Connect

    Lou, Tak Pui

    2003-05-01

    Neutron generators based on the {sup 2}H(d,n){sup 3}He and {sup 3}H(d,n){sup 4}He fusion reactions are the most commonly available neutron sources. The applications of current commercial neutron generators are often limited by their low neutron yield and their short operational lifetime. A new generation of D-D/D-T fusion-based neutron generators has been designed at Lawrence Berkeley National Laboratory (LBNL) by using high current ion beams hitting on a self-loading target that has a large surface area to dissipate the heat load. This thesis describes the rationale behind the new designs and their potential applications. A survey of other neutron sources is presented to show their advantages and disadvantages compared to the fusion-based neutron generator. A prototype neutron facility was built at LBNL to test these neutron generators. High current ion beams were extracted from an RF-driven ion source to produce neutrons. With an average deuteron beam current of 24 mA and an energy of 100 keV, a neutron yield of >10{sup 9} n/s has been obtained with a D-D coaxial neutron source. Several potential applications were investigated by using computer simulations. The computer code used for simulations and the variance reduction techniques employed were discussed. A study was carried out to determine the neutron flux and resolution of a D-T neutron source in thermal neutron scattering applications for condensed matter experiments. An error analysis was performed to validate the scheme used to predict the resolution. With a D-T neutron yield of 10{sup 14} n/s, the thermal neutron flux at the sample was predicted to be 7.3 x 10{sup 5} n/cm{sup 2}s. It was found that the resolution of cold neutrons was better than that of thermal neutrons when the duty factor is high. This neutron generator could be efficiently used for research and educational purposes at universities. Additional applications studied were positron production and Boron Neutron Capture Therapy (BNCT). The

  12. Extrusion of tritium and D-T pellets for ITER fueling

    SciTech Connect

    Fisher, P.W.; Gouge, M.J.; Denny, B.J.

    1996-07-01

    As part of the International Thermonuclear Engineering Reactor (ITER) plasma fueling development program, Oak Ridge National Laboratory (ORNL) has fabricated a pellet injection system to test the mechanical and thermal properties of extruded tritium. This repeating, single-stage, pneumatic injector, called the Tritium-Proof-of-Principle Phase II (TPOP-II) Pellet Injector, has a piston-driven mechanical extruder and is designed to extrude and accelerate hydrogenic pellets sized for the ITER device. The TPOP-II program has the following development goals: evaluate the feasibility of extruding tritium and deuterium-tritium (D-T) mixtures for use in future pellet injection systems; determine the mechanical and thermal properties of tritium and D-T extrusions; integrate, test, and evaluate the extruder in a repeating, single-stage light gas gun that is sized for the ITER application (pellet diameter {approximately}7 to 8 mm); evaluate options for recycling propellant and extruder exhaust gas; evaluate operability and reliability of ITER prototypical fueling systems in an environment of significant tritium inventory that requires secondary and room containment systems. In tests with deuterium feed at ORNL, up to 13 pellets have been extruded at rates up to 1 Hz and accelerated to speeds of 1.0 to 1.1 km/s, using hydrogen propellant gas at a supply pressure of 65 bar. Initially, deuterium pellets 7.5 mm in diameter and 11 mm in length were produced--the largest cryogenic pellets produced by the fusion program to date. These pellets represent about a 10% density perturbation to ITER. Subsequently, the extruder nozzle was modified to produce pellets which are nearly 7.5 mm right circular cylinders.

  13. Yields of p, d, t formed in stopped pion absorption by intranuclear clusters

    NASA Astrophysics Data System (ADS)

    Chernyshev, B. A.; Gurov, Yu B.; Korotkova, L. Yu; Lapushkin, S. V.; Leonova, T. I.; Pritula, R. V.; Schurenkova, T. D.

    2016-02-01

    Results of the study of spectra and yields of p, d, t formed in stopped pion absorption by nuclei are presented. Data on charged particle formation have been obtained for 17 isotopes in wide atomic mass range (6 < A < 209). Empirical model was proposed to describe A- dependences of primary p, d, t yields.

  14. Enhancement of Localized ICRF Heating and Current Drive in TFTR D-T Plasmas

    SciTech Connect

    = G Schilling, First Author

    1997-04-15

    Theoretical advantages have led to an increased importance of the modification and sustainment of pressure and magnetic shear profiles in plasmas. We have demonstrated electron heating and current drive in TFTR (Tokamak Fusion Test Reactor) plasmas with the existing 43/63.6 MHz ICRF (ion cyclotron range of frequencies) system, both via the fast wave and via mode conversion of the fast wave to an ion-Bernstein wave. In order to achieve both on- and off-axis mode conversion in a pure D-T (deuterium-tritium) plasma, we have changed the operating frequency of two of our transmitters and antennas to 30 MHz and improved the launched directional wave spectrum. As a second step, two new four-strap fast-wave antennas have been installed, and a new four-strap direct-launch IBW antenna has been added as well. This reconfiguration and the resulting operating characteristics of the TFTR ICRF system in a variety of discharges will be presented.

  15. D--T and D sub 2 retention in plastic shells

    SciTech Connect

    Collins, G.W.; Sanchez, J.J.; Fearon, E.M. )

    1992-07-01

    We have measured the D{sub 2} and D--T gas pressure versus time inside multilayer polymer shells (polystyrene, poly(vinyl alcohol) (PVA), and plasma polymer CH{sub 1.3}) from which we calculate an effective permeability for the PVA layer. From this data, we have developed a D--T pressurization procedure for current direct drive fusion targets that increases the D--T fuel retention time an order of magnitude over previous pressurization schemes. The D--T fuel retention time will be decreased from the shells original D{sub 2} retention time ({similar to}45 h) by; (1) 50% immediately after D--T pressurization, (2) 60% after D--T pressurization and cryogenic storage for 1 day, and (3) 85% after D--T pressurization and cryogenic storage for 13 days. We have also found that heat treating the polymer shell increases the fuel retention time for D{sub 2} from 10% to 40% and that the D{sub 2} mass transfer through the composite polymer shell does not follow Fick's law. Finally, we describe an efficient target pressurization procedure for D{sub 2} fuel.

  16. Optimization Of Phase-Contrast Enhanced X-Ray Imaging Of D-T Layers

    SciTech Connect

    Kozioziemski, B

    2005-06-17

    Phase-contrast enhanced x-ray imaging has been demonstrated for characterization of D-T layers inside of beryllium shells. These first demonstrations used both scintillator and direct-detection imaging. This memo details tradeoffs between the two methods in order to optimize the imaging. The guiding principle for optimization is to minimize the exposure time while maximizing the signal-to-noise ratio at the D-T solid-vapor interface. Direct-detection and scintillator performance are comparable when imaging the full capsule. However, a scintillator allows for higher-resolution images necessary for studying local defects in the D-T layer.

  17. Radiation shielding design of BNCT treatment room for D-T neutron source.

    PubMed

    Pouryavi, Mehdi; Farhad Masoudi, S; Rahmani, Faezeh

    2015-05-01

    Recent studies have shown that D-T neutron generator can be used as a proper neutron source for Boron Neutron Capture Therapy (BNCT) of deep-seated brain tumors. In this paper, radiation shielding calculations have been conducted based on the computational method for designing a BNCT treatment room for a recent proposed D-T neutron source. By using the MCNP-4C code, the geometry of the treatment room has been designed and optimized in such a way that the equivalent dose rate out of the treatment room to be less than 0.5μSv/h for uncontrolled areas. The treatment room contains walls, monitoring window, maze and entrance door. According to the radiation protection viewpoint, dose rate results of out of the proposed room showed that using D-T neutron source for BNCT is safe. PMID:25732097

  18. Study of TFTR D-T neutron spectra using natural diamond detectors

    SciTech Connect

    Roquemore, A.L.; Krasilnikov, A.V., Gorelenkov, N.N.

    1996-12-31

    Three Natural Diamond Detector (NDD) based spectrometers have been used for neutron spectra measurement during Deuterium-Tritium (D-T) experiments using high power Neutral Beam Injection (NBI) and Ton Cyclotron Resonance Heating (ICRH) on the Tokamak Fusion Test Reactor (TFTR) in 1996. A 2-3 % energy resolution coupled with the high radiation resistance of NDDs (5 x 10{sup 14}n/cm{sup 2}) makes them ideal for measuring the D-T neutron spectra in the high radiation environment of TFTR tritium experiments. The compact size of the NDD made it possible to insert one of the detectors into one of the center channels of the TFTR multichannel neutron collimator to provide a vertical view perpendicular to the vessel midplane, Two other detectors were placed inside shields in TFTR test cell and provide measurements of the neutrons having angles of emission of 110- 180{degrees} and 60-12-{degrees} with respect to the direction of the plasma current. By using a 0.25 {mu}s shaping time of the Ortec 673 spectroscopy amplifier we were able to accumulate useful spectrometry data at count rates up to 1.5 x 10{sup 3} counts/sec. To model the D- T neutron spectra measured by each of three NDD`s the Neutron Source post TRANSP (NST) code and semi-analytical model were developed. A set of D-T and D-D plasmas is analyzed for the dynamics of D-T neutron spectral broadening for each of three NDD cones of view. The application of three NDD based D-T neutron -spectrometer array demonstrated the anisotropy of the ion distribution function. and provided a mature of the dynamics of the effective ion temperatures for each detector view, and determined the tangential velocity of resonant tritons during ICRH.

  19. Emergence of Multidrug-resistant Salmonella Paratyphi B dT+, Canada

    PubMed Central

    Boyd, David; Cloeckaert, Axel; Ahmed, Rafiq; Ng, Lai-King

    2004-01-01

    We document an increase in the number of multidrug-resistant Salmonella enterica serovar Paratyphi B dT+ identified in Canada. Most of these strains harbor Salmonella genomic island 1 (SGI1). Further studies are needed to determine factors contributing to the observed emergence of this multidrug-resistant strain. PMID:15324556

  20. The photochemistry of d(T-A) in aqueous solution and in ice.

    PubMed Central

    Bose, S N; Kumar, S; Davies, R J; Sethi, S K; McCloskey, J A

    1984-01-01

    When d(T-A) is irradiated at 254 nm in aqueous solution an internal photoadduct is formed between its constituent adenine and thymine bases. The resultant photoproduct, designated TA*, arises from a singlet excited state precursor; a similar photoreaction is not observed with d(C-A) or d(T-G). In contradistinction, irradiation of d(T-A) in frozen aqueous solution yields a dimeric photoproduct in which two d(T-A) molecules are coupled together by a (6-4) photoadduct linkage between their respective thymine bases. Both photoproducts have been extensively characterised by a combination of electron impact and fast atom bombardment mass spectrometry, UV, CD, 1H NMR and fluorescence spectroscopy. Acid treatment of TA* gives 6-methylimidazo[4,5-b]pyridin-5-one whose identity was established by an independent chemical synthesis involving photorearrangement of 6-methyl-imidazo[4,5-b]pyridine N(4)-oxide. A tentative mechanism is presented to account for the acid degradation of TA*. The structure of the dimeric ice photoproduct follows from its cleavage, by snake venom phosphodiesterase, to 5'-dAMP and the (6-4) bimolecular photoadduct of thymidine; on acid hydrolysis it gives adenine and 6-(5'-methyl-2'-oxopyrimidin-4'-yl) thymine. PMID:6493984

  1. Radioactivity measurements of ITER materials using the TFTR D-T neutron field

    SciTech Connect

    Kumar, A.; Abdou, M.A.; Barnes, C.W.; Kugel, H.W.; Loughlin, M.J.

    1994-08-01

    The availability of high D-T fusion neutron yields at TFTR has provided a useful opportunity to directly measure D-T neutron-induced radioactivity in a realistic tokamak fusion reactor environment for materials of vital interest to ITER. These measurements are valuable for characterizing radioactivity in various ITER candidate materials. for validating complex neutron transport calculations, and for meeting fusion reactor licensing requirements. The radioactivity measurements at TFTR involve potential ITER materials including stainless steel 316, vanadium, titanium, chromium, silicon, iron, cobalt, nickel, molybdenum, aluminum, copper, zinc. zirconium, niobium, and tungsten. Small samples of these materials were irradiated close to the plasma and just outside the vacuum vessel wall of TFTR, locations of different neutron energy spectra. Saturation activities for both threshold and capture reactions were measured. Data from dosimetric reactions have been used to obtain preliminary neutron energy spectra. Spectra from the first wall were compared to calculations from ITER and to measurements from accelerator-based tests.

  2. Chromosome aberrations induced in human lymphocytes by D-T neutrons

    SciTech Connect

    Lloyd, D.C.; Edwards, A.A.; Prosser, J.S.; Bolton, D.; Sherwin, A.G.

    1984-06-01

    Unstable chromosome aberrations induced by in vitro irradiation with D-T neutrons have been analyzed in human blood lymphocytes. With respect to 250 kVp X rays a maximum limiting RBE at low doses of 4.1 was obtained for dicentric aberrations. Using aberrations as markers in mixed cultures of irradiated and unirradiated cells permits an assessment of interphase death plus mitotic delay. The low-dose RBE for this effect is 2.5. Assuming all unstable aberrations observed at metaphase would lead to cell death by nondisjunction allows an assessment of mitotic death. The low-dose RBE for this effect is 4.5. The data are compared with similar work obtained earlier with /sup 242/Cm ..cap alpha.. particles. The application of the present work to cytogenetic assessment of dose after accidental exposure to D-T neutrons is discussed.

  3. Excited states of 26Al studied via the reaction 27Al(d,t)

    NASA Astrophysics Data System (ADS)

    Srivastava, Vishal; Bhattacharya, C.; Rana, T. K.; Manna, S.; Kundu, S.; Bhattacharya, S.; Banerjee, K.; Roy, P.; Pandey, R.; Mukherjee, G.; Ghosh, T. K.; Meena, J. K.; Roy, T.; Chaudhuri, A.; Sinha, M.; Saha, A. K.; Asgar, Md. A.; Dey, A.; Roy, Subinit; Moin Shaikh, Md.

    2016-05-01

    The reaction 27Al(d,t) at 25 MeV was utilized to study the excited states of 26Al. The angular distributions of the observed excited states of 26Al were analyzed with zero range distorted wave Born approximation as well as by incorporating finite range correction parameters to extract spectroscopic factors. The two sets of extracted spectroscopic factors were compared with each other to see the effect of using finite range correction in the transfer form factor.

  4. Cross Sections Calculations of ( d, t) Nuclear Reactions up to 50 MeV

    NASA Astrophysics Data System (ADS)

    Tel, E.; Yiğit, M.; Tanır, G.

    2013-04-01

    In nuclear fusion reactions two light atomic nuclei fuse together to form a heavier nucleus. Fusion power is the power generated by nuclear fusion processes. In contrast with fission power, the fusion reaction processes does not produce radioactive nuclides. The fusion will not produce CO2 or SO2. So the fusion energy will not contribute to environmental problems such as particulate pollution and excessive CO2 in the atmosphere. Fusion powered electricity generation was initially believed to be readily achievable, as fission power had been. However, the extreme requirements for continuous reactions and plasma containment led to projections being extended by several decades. In 2010, more than 60 years after the first attempts, commercial power production is still believed to be unlikely before 2050. Although there have been significant research and development studies on the inertial and magnetic fusion reactor technology, there is still a long way to go to penetrate commercial fusion reactors to the energy market. In the fusion reactor, tritium self-sufficiency must be maintained for a commercial power plant. Therefore, for self-sustaining (D-T) fusion driver tritium breeding ratio should be greater than 1.05. Working out the systematics of ( d, t) nuclear reaction cross sections is of great importance for the definition of the excitation function character for the given reaction taking place on various nuclei at different energies. Since the experimental data of charged particle induced reactions are scarce, self-consistent calculation and analyses using nuclear theoretical models are very important. In this study, ( d, t) cross sections for target nuclei 19F, 50Cr, 54Fe, 58Ni, 75As, 89Y, 90Zr, 107Ag, 127I, 197Au and 238U have been investigated up to 50 MeV deuteron energy. The excitation functions for ( d, t) reactions have been calculated by pre-equilibrium reaction mechanism. Calculation results have been also compared with the available measurements in

  5. Helix-coil transition of the self-complementary dG-dG-dA-dA-dT-dT-dC-dC duplex.

    PubMed

    Patel, D J; Canuel, L L

    1979-05-15

    The helix-coil transition of the octanucleotide self-complementary duplex dG-dG-dA-dA-dT-dT-dC-dC has been monitored at the Watson-Crick protons, the base and sugar nonexchangeable protons and the backbone phosphates by high-resolution nuclear magnetic resonance (NMR) spectroscopy. The melting transition of the octanucleotide monitored by ultraviolet absorbance spectroscopy is characterized by the thermodynamic parameters delta H degree = -216.7 kJ/mol and delta S degree (25 degrees C) = -0.632 KJ mol-1 K-1 in 0.1 M NaCl, 10 mM phosphate solution. Correlation of the transition midpoint values monitored by the ultraviolet absorbance studies at strand concentrations below 0.2 mM and by NMR studies at 5.3 mM suggest that both methods are monitoring the octanucleotide duplex-to-strand transition. The NMR spectra of the Watson-Crick ring NH protons of the octanucleotide duplex have been followed as a function of temperature. The resonance from the terminal dG.dC base pairs broadens out at room temperature while the resonances from the other base pairs broaden simultaneously with the onset of the melting transition. The nonexchangeable base and sugar H-1' protons are resolved in the duplex and strand states and shift as average peaks through the melting transition. The experimental shifts on duplex formation have been compared with calculated values based on ring-current and atomic diamagnetic anisotropy contributions for a B-DNA base-pair-overlap geometry in solution. Several nonexchangeable proton resonances broaden in the fast-exchange region during the duplex-to-strand transition and the excess widths yield a duplex dissociation rate constant for the octanucleotide of 1.9 x 10(3) s-1 at 32 degrees C (fraction of duplex = 0.86) in 0.1 M NaCl, 10 mM phosphate buffer. The 31P resonances of the seven internucleotide phosphates are distributed over 0.6 ppm in the duplex state, shift downfield during the duplex-to-strand transition and undergo additional downfield shifts

  6. Spatio-temporal interpolation of soil moisture in 3D+T using automated sensor network data

    NASA Astrophysics Data System (ADS)

    Gasch, C.; Hengl, T.; Magney, T. S.; Brown, D. J.; Gräler, B.

    2014-12-01

    Soil sensor networks provide frequent in situ measurements of dynamic soil properties at fixed locations, producing data in 2- or 3-dimensions and through time (2D+T and 3D+T). Spatio-temporal interpolation of 3D+T point data produces continuous estimates that can then be used for prediction at unsampled times and locations, as input for process models, and can simply aid in visualization of properties through space and time. Regression-kriging with 3D and 2D+T data has successfully been implemented, but currently the field of geostatistics lacks an analytical framework for modeling 3D+T data. Our objective is to develop robust 3D+T models for mapping dynamic soil data that has been collected with high spatial and temporal resolution. For this analysis, we use data collected from a sensor network installed on the R.J. Cook Agronomy Farm (CAF), a 37-ha Long-Term Agro-Ecosystem Research (LTAR) site in Pullman, WA. For five years, the sensors have collected hourly measurements of soil volumetric water content at 42 locations and five depths. The CAF dataset also includes a digital elevation model and derivatives, a soil unit description map, crop rotations, electromagnetic induction surveys, daily meteorological data, and seasonal satellite imagery. The soil-water sensor data, combined with the spatial and temporal covariates, provide an ideal dataset for developing 3D+T models. The presentation will include preliminary results and address main implementation strategies.

  7. Spatially resolved D-T(2) correlation NMR of porous media.

    PubMed

    Zhang, Yan; Blümich, Bernhard

    2014-05-01

    Within the past decade, 2D Laplace nuclear magnetic resonance (NMR) has been developed to analyze pore geometry and diffusion of fluids in porous media on the micrometer scale. Many objects like rocks and concrete are heterogeneous on the macroscopic scale, and an integral analysis of microscopic properties provides volume-averaged information. Magnetic resonance imaging (MRI) resolves this spatial average on the contrast scale set by the particular MRI technique. Desirable contrast parameters for studies of fluid transport in porous media derive from the pore-size distribution and the pore connectivity. These microscopic parameters are accessed by 1D and 2D Laplace NMR techniques. It is therefore desirable to combine MRI and 2D Laplace NMR to image functional information on fluid transport in porous media. Because 2D Laplace resolved MRI demands excessive measuring time, this study investigates the possibility to restrict the 2D Laplace analysis to the sum signals from low-resolution pixels, which correspond to pixels of similar amplitude in high-resolution images. In this exploratory study spatially resolved D-T2 correlation maps from glass beads and mortar are analyzed. Regions of similar contrast are first identified in high-resolution images to locate corresponding pixels in low-resolution images generated with D-T2 resolved MRI for subsequent pixel summation to improve the signal-to-noise ratio of contrast-specific D-T2 maps. This method is expected to contribute valuable information on correlated sample heterogeneity from the macroscopic and the microscopic scales in various types of porous materials including building materials and rock. PMID:24607821

  8. Zr-92(d,p)Zr-93 and Zr-92(d,t)Zr-91

    NASA Technical Reports Server (NTRS)

    Baron, N.; Fink, C. L.; Christensen, P. R.; Nickels, J.; Torsteinsen, T.

    1972-01-01

    The structures of Zr-93 and Zr-91 were studied by the stripping reaction Zr-92(d,p)Zr-93 and the pick-up reaction Zr-92(d,t)Zr-91 using 13 MeV incident deuterons. The reaction product particles were detected by counter telescope. Typical spectra from the reactions were analyzed by a nonlinear least squares peak fitting program which included a background search. Spin and parity assignments to observed excited levels were made by comparing experimental angular distributions with distorted wave Born approximation calculations.

  9. Fusion gamma diagnostics for D-T and D-/sup 3/He plasmas

    SciTech Connect

    Medley, S.S.; Hendel, H.

    1982-11-01

    Nuclear reactions of interest in controlled thermonuclear fusion research often possess a branch yielding prompt emission of gamma radiation. In principle, the gamma emission can be exploited to provide a new fusion diagnostic offering measurements comparable to those obtained by the well established neutron diagnostics methods. The conceptual aspects for a fusion gamma diagnostic are discussed in this paper and the feasibility for application to the Tokamak Fusion Test Reactor during deuterium neutral beam heating of a D-T plasma and minority ion cyclotron resonance heating of a D-/sup 3/He plasma is examined.

  10. Monitoring of D-T accelerator neutron output in a PGNAA system using silicon carbide detectors

    NASA Astrophysics Data System (ADS)

    Dulloo, Abdul R.; Ruddy, Frank H.; Seidel, John G.; Petrović, Bojan

    2001-07-01

    Silicon carbide (SiC) detectors are being employed to monitor the neutron output of the D-T accelerator in a pulsed Prompt Gamma Neutron Activation Analysis (PGNAA) system. Detection of the source neutrons relies on energetic neutron reactions in the detector material. Experimental testing has been performed to confirm that the detector response is caused by fast neutrons from the accelerator source. Modeling calculations have also been carried out to provide additional verification. Use of the SiC detectors in the PGNAA system is expected to assist in evaluating system performance as well as ensuring accurate data interpretation and analysis.

  11. Measurement and analysis of radioactivity induced in CuCrZr by D?T neutrons

    NASA Astrophysics Data System (ADS)

    Eichin, R.; Adelhelm, C.; Blokhin, A. I.; Forrest, R. A.; Freiesleben, H.; Kovalchuk, V. D.; Markovskij, D. V.; Seidel, K.; Unholzer, S.

    2004-08-01

    CuCrZr is used in high heat flux components of ITER and other fusion reactor designs. A CuCrZr alloy of the European Fusion Technology Programme was irradiated with D-T neutrons, and the γ-activities of all nuclides which are relevant up to the recycling limit of the material were measured. The results were analysed with the European Activation System (versions EASY-2001 and EASY-2003). The calculated total activation property of the material was validated within 10%. The long-term radioactivity was estimated to be well below the hands-on limit with an uncertainty of 19%.

  12. Observation of sawtooth redistribution of nonthermal, confined alpha particles in TFTR D-T discharges

    SciTech Connect

    Stratton, B.; Budny, R.; Chang, Z.; Fonck, R.; Wising, F.; Odblom, A.

    1996-05-01

    Radial profiles of the density of confined alpha particles with energies in the 0.15-0.6 MeV range are spectroscopically observed before and after a sawtooth crash in a TFTR D-T plasma. A large drop in the core alpha density is seen indicating expulsion of alphas from the core to the plasma periphery. The measured changes in the alpha density profiles are consistent with predictions based on the Kolesnichenko sawtooth model, indicating that it may be used to reliably predict the effect of sawteeth on fusion-produced alphas.

  13. Monte Carlo modelling of distributions of the d-d and d-t reaction products in a dedicated measuring chamber at the fast neutron generator

    NASA Astrophysics Data System (ADS)

    Wiącek, U.; Dankowski, J.

    2015-04-01

    A fast neutron generator with a tritium target can be used to generate d-d and d-t reaction products corresponding to thermonuclear reactions in tokamaks or stellarators. In this way, convenient laboratory conditions for tests of spectrometric detectors - prior to their installation at the big fusion devices - can be achieved. Distributions of the alpha particles, protons, deuterons, and tritons generated by the fast neutron generator operating at the Institute of Nuclear Physics PAN in Cracow, Poland, were calculated by means of the Monte Carlo (MC) codes. Results of this MC modelling are presented.

  14. Studies on synthetic chromatins containing poly(dA-dT) X poly(dA-dT) and poly(dG-dC) X poly(dG-dC).

    PubMed

    Prevelige, P E; Fasman, G D

    1983-01-20

    Core histones (H2A,H2B,H3,H4)2, were reconstituted with the synthetic polynucleotides poly(dA-dT) X poly(dA-dT) and poly(dG-dC) X poly(dG-dC) to yield synthetic chromatins containing 200 basepairs per octamer. These synthetic chromatins displayed a 36% decrease in the circular dichroism (CD) peak ellipticity from the value of the polynucleotide free in solution; the poly(dA-dT) X poly(dA-dT)/chromatin showed an increase in the complexity of the thermal denaturation profile compared to that of the polynucleotide. Both the temperature of maximum dh/dT for each transition (Tm) and the relative amount of poly(dA-dT) X poly(dA-dT) in the synthetic chromatin melting in each of the four thermal transitions is a function of the ionic strength over the 0-5 mM sodium phosphate range (0.25 mM EDTA, pH 7.0); a shift of material toward higher melting transitions was observed with increasing ionic strength. The CD peak ellipticity value for both synthetic chromatins was ionic strength-independent over the 0-5 mM sodium phosphate range. These results are in contrast to those observed with H1/H5 stripped chicken erythrocyte chromatin (Fulmer, A. and Fasman, G.D. (1979) Biopolymers 18, 2875-2891), where an ionic strength dependence was found. Differences in the CD spectra between poly(dA-dT) X poly(dA-dT)/chromatin, poly(dG-dC) X poly(dG-dC)/chromatin and H1/H5 stripped chicken erythrocyte chromatin suggest subtle differences in assembly. Finally, the temperature dependence of the CD spectra of poly(dA-dT) X poly(dA-dT)-containing synthetic chromatin, which is similar to that for the polynucleotide, suggests the core histone bound polynucleotide has a large degree of conformational flexibility allowing it to undergo the premelt transition. PMID:6830804

  15. Experimental Studies of Alfven Eigenmode Stability in JET D-T Plasmas

    NASA Astrophysics Data System (ADS)

    Fasoli, A.; Heeter, R.; Borba, D.; Gormezano, C.; Sharapov, S.; Jaun, A.

    1997-11-01

    Systematic studies of Alfven Eigenmodes (AE) are performed at JET, based on the excitation via resonant interaction with fast particles generated by additional heating and by fusion reactions, and via external antennas, providing a direct measurement of the mode damping rate. Similar damping rates are observed in D-D and D-T plasmas with similar configurations. In both cases the formation of an X-point provides a strong stabilising effect on low-n TAE. The fast particle drive is detected as a reduction in the measured damping rate as the fast particle pressure is increased. For ICRH power levels above the experimentally established marginal stability limit, 3 MW < P_thres < 6 MW, the magnetic fluctuation spectra indicate the destabilisation of different families of AE (TAE, EAE, kTAE, NAE). In 50:50 D-T plasmas characterised by moderate fusion power (P_fusion< 2 MW), alpha particle pressure is observed to destabilise TAE in the afterglow of the NBI and ICRH heating phase. The diagnostic potential of AE will be discussed along with the implications for the AE stability in ignited plasmas.

  16. CD4+NKG2D+ T Cells Exhibit Enhanced Migratory and Encephalitogenic Properties in Neuroinflammation

    PubMed Central

    Ruck, Tobias; Bittner, Stefan; Gross, Catharina C.; Breuer, Johanna; Albrecht, Stefanie; Korr, Sabrina; Göbel, Kerstin; Pankratz, Susann; Henschel, Christian M.; Schwab, Nicholas; Staszewski, Ori; Prinz, Marco; Kuhlmann, Tanja

    2013-01-01

    Migration of encephalitogenic CD4+ T lymphocytes across the blood-brain barrier is an essential step in the pathogenesis of multiple sclerosis (MS). We here demonstrate that expression of the co-stimulatory receptor NKG2D defines a subpopulation of CD4+ T cells with elevated levels of markers for migration, activation, and cytolytic capacity especially when derived from MS patients. Furthermore, CD4+NKG2D+ cells produce high levels of proinflammatory IFN-γ and IL-17 upon stimulation. NKG2D promotes the capacity of CD4+NKG2D+ cells to migrate across endothelial cells in an in vitro model of the blood-brain barrier. CD4+NKG2D+ T cells are enriched in the cerebrospinal fluid of MS patients, and a significant number of CD4+ T cells in MS lesions coexpress NKG2D. We further elucidated the role of CD4+NKG2D+ T cells in the mouse system. NKG2D blockade restricted central nervous system migration of T lymphocytes in vivo, leading to a significant decrease in the clinical and pathologic severity of experimental autoimmune encephalomyelitis, an animal model of MS. Blockade of NKG2D reduced killing of cultivated mouse oligodendrocytes by activated CD4+ T cells. Taken together, we identify CD4+NKG2D+ cells as a subpopulation of T helper cells with enhanced migratory, encephalitogenic and cytotoxic properties involved in inflammatory CNS lesion development. PMID:24282598

  17. Operations

    ERIC Educational Resources Information Center

    Wilkins, Jesse L. M.; Norton, Anderson; Boyce, Steven J.

    2013-01-01

    Previous research has documented schemes and operations that undergird students' understanding of fractions. This prior research was based, in large part, on small-group teaching experiments. However, written assessments are needed in order for teachers and researchers to assess students' ways of operating on a whole-class scale. In this…

  18. A Z-like form of poly(dA-dC).poly(dG-dT) in solution?

    PubMed Central

    Vorlíckovă, M; Kypr, J; Stokrová, S; Sponar, J

    1982-01-01

    Circular dichroism was used to study changes in conformation of poly(dA-dC).poly(dG-dT) caused by a high concentration of various monovalent salts. It was found that CsF induced the gradual appearance of a negative band in the long wavelength part of the CD spectrum of poly(dA-dC).poly(dG-dT), which might reflect a transition of this DNA toward a Z-like structure. PMID:7063415

  19. Designing mid-wave infrared (MWIR) thermo-optic coefficient (dn/dT) in chalcogenide glasses

    NASA Astrophysics Data System (ADS)

    Gleason, Benn; Sisken, Laura; Smith, Charmayne; Richardson, Kathleen

    2016-05-01

    Seventeen infrared-transmitting GeAsSe chalcogenide glasses were fabricated to determine the role of chemistry and structure on mid-wave infrared (MWIR) optical properties. The refractive index and thermoptic coefficients of samples were measured at λ = 4.515 μm using an IR-modified Metricon prism coupler, located at University of Central Florida. Thermo-optic coefficient (dn/dT) values were shown to range from approximately -40 ppm/°C to +65 ppm/°C, and refractive index was shown to vary between approximately 2.5000 and 2.8000. Trends in refractive index and dn/dT were found to be related to the atomic structures present within the glassy network, as opposed to the atomic percentage of any individual constituent. A linear correlation was found between the quantity (n-3•dn/dT) and the coefficient of thermal expansion (CTE) of the glass, suggesting the ability to compositionally design chalcogenide glass compositions with zero dn/dT, regardless of refractive index or dispersion performance. The tunability of these novel glasses offer increased thermal and mechanical stability as compared to the current commercial zero dn/dT options such as AMTIR-5 from Amorphous Materials Inc. For IR imaging systems designed to achieve passive athermalization, utilizing chalcogenide glasses with their tunable ranges of dn/dT (including zero) can be key to addressing system size, weight, and power (SWaP) limitations.

  20. 3D+t brain MRI segmentation using robust 4D Hidden Markov Chain.

    PubMed

    Lavigne, François; Collet, Christophe; Armspach, Jean-Paul

    2014-01-01

    In recent years many automatic methods have been developed to help physicians diagnose brain disorders, but the problem remains complex. In this paper we propose a method to segment brain structures on two 3D multi-modal MR images taken at different times (longitudinal acquisition). A bias field correction is performed with an adaptation of the Hidden Markov Chain (HMC) allowing us to take into account the temporal correlation in addition to spatial neighbourhood information. To improve the robustness of the segmentation of the principal brain structures and to detect Multiple Sclerosis Lesions as outliers the Trimmed Likelihood Estimator (TLE) is used during the process. The method is validated on 3D+t brain MR images. PMID:25571045

  1. Whole brain 3D T2-weighted BOLD fMRI at 7T

    PubMed Central

    Hua, Jun; Qin, Qin; van Zijl, Peter C. M.; Pekar, James J.; Jones, Craig K.

    2014-01-01

    Purpose A new acquisition scheme for T2-weighted spin-echo BOLD fMRI is introduced. Methods It employs a T2-preparation module to induce BOLD contrast, followed by a single-shot 3D fast gradient-echo readout with short TE. It differs from most spin-echo BOLD sequences in that BOLD contrast is generated before the readout, which eliminates the “dead time” due to long TE required for T2 contrast, and substantially improves acquisition efficiency. This approach, termed “3D T2prep-GRE”, was implemented at 7T with a typical spatial (2.5×2.5×2.5mm3) and temporal (TR=2.3s) resolution for fMRI and whole-brain coverage (55 slices), and compared with the widely used 2D spin-echo EPI sequence. Results In fMRI experiments of simultaneous visual/motor activities, 3D T2prep-GRE showed minimal distortion and little signal dropout across the whole brain. Its lower power deposition allowed greater spatial coverage (55 versus 17 slices with identical TR, resolution and power level), temporal SNR (60% higher) and CNR (35% higher) efficiency than 2D spin-echo EPI. It also showed smaller T2* contamination. Conclusion This approach is expected to be useful for ultra-high field fMRI, especially for regions near air cavities. The concept of using T2-preparation to generate BOLD contrast can be combined with many other sequences at any field strength. PMID:24338901

  2. A D-D/D-T fusion reaction based neutron generator system for liver tumor BNCT

    SciTech Connect

    Koivunoro, H.; Lou, T.P.; Leung, K. N.; Reijonen, J.

    2003-04-02

    Boron-neutron capture therapy (BNCT) is an experimental radiation treatment modality used for highly malignant tumor treatments. Prior to irradiation with low energetic neutrons, a 10B compound is located selectively in the tumor cells. The effect of the treatment is based on the high LET radiation released in the {sup 10}B(n,{alpha}){sup 7}Li reaction with thermal neutrons. BNCT has been used experimentally for brain tumor and melanoma treatments. Lately applications of other severe tumor type treatments have been introduced. Results have shown that liver tumors can also be treated by BNCT. At Lawrence Berkeley National Laboratory, various compact neutron generators based on D-D or D-T fusion reactions are being developed. The earlier theoretical studies of the D-D or D-T fusion reaction based neutron generators have shown that the optimal moderator and reflector configuration for brain tumor BNCT can be created. In this work, the applicability of 2.5 MeV neutrons for liver tumor BNCT application was studied. The optimal neutron energy for external liver treatments is not known. Neutron beams of different energies (1eV < E < 100 keV) were simulated and the dose distribution in the liver was calculated with the MCNP simulation code. In order to obtain the optimal neutron energy spectrum with the D-D neutrons, various moderator designs were performed using MCNP simulations. In this article the neutron spectrum and the optimized beam shaping assembly for liver tumor treatments is presented.

  3. Novel concept of time-of-flight neutron spectrometer for measurement of the D/T burning ratio in the ITER

    NASA Astrophysics Data System (ADS)

    Asai, K.; Naoi, N.; Iguchi, T.; Watanabe, K.; Kawarabayashi, J.; Nishitani, T.

    2006-10-01

    A time-of-flight (TOF) neutron spectrometer is a candidate for the measurement of the D/T burning ratio in the International Thermonuclear Experimental Reactor (ITER). In ITER high-power experiments, the TOF system suffers from a high event rate or accidental counts due to high radiation intensities, which is one of several background sources in DD neutron measurement. We herein propose a new neutron spectrometer to apply to the measurement of the D/T burning ratio in the ITER high-power operation region. This system is based on the conventional double-crystal TOF method and consists of a water cell and several pairs of scintillators. A water cell is inserted before the first scintillator of the TOF system and acts as a radiator or neutron scattering material. Because DD neutrons have a larger cross section of elastic scattering with hydrogen than DT neutrons, the elastic scattering in the radiator enhances the relative ratio of DD/DT intensity by approximately three times before entering the TOF system. The enhancement of the relative intensity of DD neutrons makes the detection of DD neutrons easier. The feasibility of this method as a neutron spectrometer has been verified through a preliminary experiment using a DT neutron beam (20mm ϕ) at the Fusion Neutronics Source, Japan Atomic Energy Agency. The present article describes the basic performance of the prototype system.

  4. LET spectrometry of 14 MeV (D-T) neutrons using CR-39 track detectors

    NASA Astrophysics Data System (ADS)

    Sahoo, G. S.; Tripathy, S. P.; Sunil, C.; Sarkar, P. K.

    2013-04-01

    Linear energy transfer (LET) spectrum in water in the range of 12 keV/μm to 382 keV/μm due to 14 MeV (D-T) neutrons is estimated using the track size parameters in two different types of CR-39 track detectors, viz. Intercast (1.5 mm) and Pershore (0.5 mm). Another set of CR-39s (Intercast) combined with 1 mm polyethylene (PE) radiators is exposed to study the effect of enhanced recoils on the LET spectrum. The detection efficiencies for all these cases and the enhancement ratio due to PE radiator are determined. Using this LET spectrum, the microdosimetric spectra of absorbed doses and dose equivalents are estimated based on the Q-L conversion factors as given in ICRP 60. The shape of the LET spectra are found to be similar in all the cases, however, the dose equivalents obtained with the CR-39+PE radiator is about 20% more than the other detectors without PE. The ratios of dose equivalents obtained from LET spectra (HLET) and the ambient dose equivalent (H*(10)) obtained from fluence-to-dose equivalent conversion factors (ICRP 74) for 14 MeV neutrons are used to estimate the dose response of the detectors. H*(10) is also measured using a neutron rem meter, the response of which is found to be about 23% less than the actual dose.

  5. Emulation of petroleum well-logging D-T2 correlations on a standard benchtop spectrometer.

    PubMed

    Mitchell, J; Fordham, E J

    2011-10-01

    An experimental protocol is described that allows two-dimensional (2D) nuclear magnetic resonance (NMR) correlations of apparent diffusion coefficient D(app) and effective transverse relaxation time T(2,eff) to be acquired on a bench-top spectrometer using pulsed field gradients (PFG) in such a manner as to emulate D(app)-T(2,eff) correlations acquired using a well-logging tool with a fixed field gradient (FFG). This technique allows laboratory-scale NMR measurements of liquid-saturated cored rock to be compared directly to logging data obtained from the well by virtue of providing a comparable acquisition protocol and data format, and hence consistent data processing. This direct comparison supports the interpretation of the well-logging data, including a quantitative determination of the oil/brine saturation. The D-T(2) pulse sequence described here uses two spin echoes (2SE) with a variable echo time to encode for diffusion. The diffusion and relaxation contributions to the signal decay are then deconvolved using a 2D numerical inversion. This measurement allows shorter relaxation time components to be probed than in conventional diffusion measurements. A brief discussion of the numerical inversion algorithms available for inverting these non-rectangular data is included. The PFG-2SE sequence described is well suited to laboratory-scale studies of porous media and short T(2) samples in general. PMID:21875819

  6. Gint2D-T2 correlation NMR of porous media

    NASA Astrophysics Data System (ADS)

    Zhang, Yan; Blümich, Bernhard

    2015-03-01

    The internal magnetic field gradient induced in porous media by magnetic susceptibility differences at material interfaces impacts diffusion measurements in particular at high magnetic field and can be used to probe the pore structure. Insight about the relationship between pore space and internal gradient Gint can be obtained from 2D Laplace NMR experiments. When measuring distributions of transverse relaxation times T2 in fluid filled porous media, relaxation and diffusion in internal gradients arise simultaneously and data are often interpreted with the assumption that one or the other parameter be constant throughout the sample. To examine this assumption we measure correlations of the distributions of Gint2D and T2 by 2D Laplace NMR for three different kinds of samples, glass beads with different bead diameters saturated with water, glass beads filled with oil and water, and a wet mortar sample. For the first two samples the cases where either the internal gradient or diffusion dominates were examined separately in order to better understand the relationship between Gint and D. These results are useful for assessing the impact of internal gradients and diffusion in unknown samples, such as the mortar sample. The experiments were performed at different magnetic field strengths corresponding to 300 MHz and 700 MHz 1H Larmor frequency to identify the impact of the magnetic field on the internal gradient. Subsequently, spatially resolved Gint2D-T2 maps were obtained to study the sample heterogeneity.

  7. Gint2D-T2 correlation NMR of porous media.

    PubMed

    Zhang, Yan; Blümich, Bernhard

    2015-03-01

    The internal magnetic field gradient induced in porous media by magnetic susceptibility differences at material interfaces impacts diffusion measurements in particular at high magnetic field and can be used to probe the pore structure. Insight about the relationship between pore space and internal gradient G(int) can be obtained from 2D Laplace NMR experiments. When measuring distributions of transverse relaxation times T(2) in fluid filled porous media, relaxation and diffusion in internal gradients arise simultaneously and data are often interpreted with the assumption that one or the other parameter be constant throughout the sample. To examine this assumption we measure correlations of the distributions of G(int)(2)D and T(2) by 2D Laplace NMR for three different kinds of samples, glass beads with different bead diameters saturated with water, glass beads filled with oil and water, and a wet mortar sample. For the first two samples the cases where either the internal gradient or diffusion dominates were examined separately in order to better understand the relationship between G(int) and D. These results are useful for assessing the impact of internal gradients and diffusion in unknown samples, such as the mortar sample. The experiments were performed at different magnetic field strengths corresponding to 300 MHz and 700 MHz (1)H Larmor frequency to identify the impact of the magnetic field on the internal gradient. Subsequently, spatially resolved Gint(2)D-T(2) maps were obtained to study the sample heterogeneity. PMID:25723135

  8. The influence of stress on the /d/-/t/ distinction in French

    NASA Astrophysics Data System (ADS)

    Abdelli-Beruh, Nassima; Aravamudhan, Radhika Aravamudhan

    2005-09-01

    This study examined how monolingual French speakers produced the /d/-/t/ distinction in stressed and unstressed syllable-initial stops preceded by a voiceless phone (/s/). Syllables were embedded in sentences. Sentence durations and voicing-related differences in durations of preceding vowel, /s/, stop closure, and VOT were calculated and analyzed as a function of the stress condition separately for each speaker (stressed syllables spoken at normal speaking rate, unstressed syllables produced at normal speaking rate). Preliminary analyses reveal that the vowel and the voiceless fricative preceding the unstressed target syllables were longer than the vowel and the fricative preceding the stressed target syllables. Closure durations were also longer in the unstressed condition than in the stressed condition. However, voicing-related duration differences were not systematically affected by stress. Finally, the voicing of /s/ (/s/ before /d/) and of /d/ closures, which occurred frequently in the stress condition, occurred less frequently in the unstressed condition for most of the speakers. The perceptual consequences of such results remain to be investigated.

  9. Study on the impact of pair production interaction on D-T controllable neutron density logging.

    PubMed

    Yu, Huawei; Zhang, Li; Hou, Boran

    2016-05-01

    This paper considers the effect of pair production on the precision of D-T controllable neutron source density logging. Firstly, the principle of the traditional density logging and pulsed neutron density logging are analyzed and then gamma ray cross sections as a function of energy for various minerals are compared. In addition, the advantageous areas of Compton scattering and pair production interactions on high-energy gamma ray pulse height spectrum and the errors of a controllable source density measurement are studied using a Monte Carlo simulation method. The results indicate that density logging mainly utilizes the Compton scattering of gamma rays, while the attenuation of neutron induced gamma rays and the precision of neutron gamma density measurements are affected by pair production interactions, particularly in the gamma rays with energy higher than 2MeV. By selecting 0.2-2MeV energy range and performing proper lithology correction, the effect of pair production can be eliminated effectively and the density measurement error can be rendered close to the precision of chemical source density logging. PMID:26945102

  10. Ramond-Ramond cohomology and O( D, D) T-duality

    NASA Astrophysics Data System (ADS)

    Jeon, Imtak; Lee, Kanghoon; Park, Jeong-Hyuck

    2012-09-01

    In the name of supersymmetric double field theory, superstring effective actions can be reformulated into simple forms. They feature a pair of vielbeins corresponding to the same spacetime metric, and hence enjoy double local Lorentz symmetries. In a manifestly covariant manner — with regard to O( D, D) T-duality, diffeomorphism, B-field gauge symmetry and the pair of local Lorentz symmetries — we incorporate R-R potentials into double field theory. We take them as a single object which is in a bi-fundamental spinorial representation of the double Lorentz groups. We identify cohomological structure relevant to the field strength. A priori, the R-R sector as well as all the fermions are O( D, D) singlet. Yet, gauge fixing the two vielbeins equal to each other modifies the O( D, D) transformation rule to call for a compensating local Lorentz rotation, such that the R-R potential may turn into an O( D, D) spinor and T-duality can flip the chirality exchanging type IIA and IIB supergravities.

  11. Helium release and microstructural changes in Er(D,T)2-x3Hex films).

    SciTech Connect

    Gelles, D. S.; Browning, James Frederick; Snow, Clark Sheldon; Banks, James Clifford; Mangan, Michael A.; Rodriguez, Mark Andrew; Brewer, Luke N.; Kotula, Paul Gabriel

    2007-12-01

    Er(D,T){sub 2-x} {sup 3}He{sub x}, erbium di-tritide, films of thicknesses 500 nm, 400 nm, 300 nm, 200 nm, and 100 nm were grown and analyzed by Transmission Electron Microscopy, X-Ray Diffraction, and Ion Beam Analysis to determine variations in film microstructure as a function of film thickness and age, due to the time-dependent build-up of {sup 3}He in the film from the radioactive decay of tritium. Several interesting features were observed: One, the amount of helium released as a function of film thickness is relatively constant. This suggests that the helium is being released only from the near surface region and that the helium is not diffusing to the surface from the bulk of the film. Two, lenticular helium bubbles are observed as a result of the radioactive decay of tritium into {sup 3}He. These bubbles grow along the [111] crystallographic direction. Three, a helium bubble free zone, or 'denuded zone' is observed near the surface. The size of this region is independent of film thickness. Four, an analysis of secondary diffraction spots in the Transmission Electron Microscopy study indicate that small erbium oxide precipitates, 5-10 nm in size, exist throughout the film. Further, all of the films had large erbium oxide inclusions, in many cases these inclusions span the depth of the film.

  12. Results of d+T fast neutron irradiation on advanced tumors of bladder and rectum

    SciTech Connect

    Battermann, J.J.

    1982-12-01

    From November, 1975 to November, 1981, around 400 patients were irradiated with 14 MeV d+T fast neutrons at the Antoni van Leeuwenhoek Hospital in Amsterdam. Special interest was focused on inoperable tumors of bladder and rectum. During the pilot phase of the study 47 patients were treated, mostly via two parallel opposed ports with dosages that ranged from 18 to more than 22 Gy. Although persistent local control was achieved in 23 patients (48%), 14 patients (29%) died of severe complications. By the introduction of a six field technique, the fatal complication rate could be reduced significantly. Since May 1978 patients were randomized in a three arm trial, using two dose levels on the neutron site. The preliminary results of a group of 91 patients show a similar survival in the three treatment arms with a somewhat better local control rate for high dose neutrons. An attempt was made to estimate RBE values for tumor control and normal tissue reactions by comparing the data for neutron irradiation with the data obtained with photons on a similar group of patients. From the values derived it must be concluded that the gain for neutron irradiation on these tumors in the pelvis will be negligible.

  13. Results of d+T fast neutron irradiation on advanced tumors of bladder and rectum

    SciTech Connect

    Battermann, J.J.

    1982-12-01

    From November, 1975 to November, 1981, around 400 patients were irradiated with 14 MeV d+T fast neutrons at the Antoni van Leeuwenhoek Hospital in Amsterdam. Special interest was focused on inoperable tumors of bladder and rectum. During the pilot phase of the study 47 patients were treated, mostly via two parallel opposed ports with dosages that ranged from 18 to more than 22 Gy. Although persistent local control was achieved in 23 patients (48%), 14 patients (29%) died of severe complications. By the introduction of a six field technique, the fatal complication rate could be reduced significantly. Since May 1978 patients were randomized in a three arm trial, using two dose levels on the neutron site. The preliminary results of a group of 91 patients show a similar survival in the three treatment arms with a somewhat better local control rate for high dose neutrons. An attempt was made to estimate RBE values for tumor control and normal tissue reaction by comparing the data for neutron irradiation with the data obtained with photons on a similar group of patients. From the values derived it must be concluded that the gain for neutron irradiation on these tumors in the pelvis will be negligible.

  14. Collaborative Learning in Technology Education: D&T Unit on Puppetry in Different Indian Socio-Cultural Contexts

    ERIC Educational Resources Information Center

    Mehrotra, Swati; Khunyakari, Ritesh; Natarajan, Chitra; Chunawala, Sugra

    2009-01-01

    The paper reports on the trials of a Design and Technology (D&T) unit carried out in three different Indian contexts with a focus on collaborative learning. Both collaboration and technology education are not common to the Indian school system. As part of a larger project to introduce technology education, suitable for middle school girls and boys…

  15. Excision of DNA segments introduced into cloning vectors by the poly(dA-dT) joining method.

    PubMed Central

    Goff, S P; Berg, P

    1978-01-01

    A method is described for excising cloned DNA segments that have been inserted into their vectors by poly(dA-dT) joins. The recombinant DNA is cleaved within the vector DNA portion by one or more restriction endonucleases to generate a linear DNA molecule with the insert DNA sequence flanked by the poly(dA-dT) joins. After denaturation, the single strands "snap back" because of the intrastrand poly(dA) and poly(dT) sequences to form circular structures with "tails" of vector DNA. The vector portion of the DNA is then digested by Escherichia coli exonuclease VII, while the insert portion remains resistant to attack. The resistant strands are annealed and purified by electrophoresis in agarose. The insert DNA segment free of contaminating vector sequences can be used as a hybridization probe and for insertion into a new vector since suitable cohesive termini are generated from the retained poly(dA) and poly(dT) tails by an appropriate exonuclease. Images PMID:347445

  16. Stereodynamics of the reactions: F + H2/HD/HT→FH + H/D/T

    NASA Astrophysics Data System (ADS)

    Chi, Xiao-Lin; Zhao, Jin-Feng; Zhang, Yong-Jia; Ma, Feng-Cai; Li, Yong-Qing

    2015-05-01

    Among many kinds of ways to study the properties of atom and molecule collision, the quasi-classical trajectory (QCT) method is an effective one to investigate the molecular reaction dynamics. QCT calculations have been carried out to investigate the stereodynamics of the reactions F + H2/HD/HT→FH + H/D/T, which proceed on the lowest-lying electronic states of the FH2 system based on the potential energy surface (PES) of the 12A’ FH2 ground state. Although the QCT method cannot describe all quantum effects in the process of the reaction, it has unique advantages when facing a three-atoms system or complicated polyatomic systems. Differential cross sections (DCSs) and three angle distribution functions P(θr), P(ϕr), P(θr, ϕr) on the PES at the collision of 2.74 kcal/mol have been investigated. The isotope effect becomes more obvious with the reagent molecule H2 turning into HD and HT. P(θr, ϕr), as the joint probability density function of both polar angles θr and ϕr, can reflect the properties of three-dimensional dynamic more intuitively. Project supported by the National Natural Science Foundation of China (Grant No. 11474141), the Scientific Research Foundation for the Returned Overseas Chinese Scholars (Grant No. 2014-1685), the Scientific Research Foundation for the Doctor of Liaoning University, the Special Fund Based Research New Technology of Methanol Conversion and Coal Instead of Oil, and the China Postdoctoral Science Foundation (Grant No. 2014M550158).

  17. Sawtooth mixing of alpha particles in TFTR D-T plasmas

    SciTech Connect

    Petrov, M.P.; Budny, R.V.; Chang, Z.

    1996-12-31

    Radially resolved confined alpha particle energy and density distributions are routinely measured on TFTR using two diagnostics: PCX and {alpha}-CHERS. The Pellet Charge-eXchange (PCX) diagnostic uses the ablation cloud formed by an impurity pellet (Li or B) for neutralization of the alphas followed by analysis of the escaping helium neutrals. PCX detects deeply trapped alpha particles in the energy range 0.5 - 3.8 MeV. The {alpha}-CHERS technique, were the alpha signal is excited by charge-exchange between alphas and the deuterium atoms of one of the heating beams and appears as a wing on the He{sup +} 468.6 nm line, detects mainly passing alphas in the range of 0.15 - 0.7 MeV. Studies of alpha losses during DT experiments on TFTR have also been conducted using lost alpha detectors located on the walls of the plasma chamber. All of these diagnostics were used for investigating the influence of sawtooth crashes on alphas in high power D-T discharges in TFTR. Both PCX and {alpha}-CHERS measurements show a strong depletion of the alpha core density and transport of trapped alphas radially outwards well beyond q = 1 surface after a sawtooth crash. Lost alpha detectors measure bursts of alpha loss of the previously confined alphas (<1%). Thus, a sawtooth crash leads mainly to radial redistribution of the alphas rather than losses. For modeling of alpha sawtooth mixing, a code is used which is based on the conventional model of magnetic reconnection and the conservation of particles, energy and magnetic flux. The effect of the particle orbit averaged toroidal drift in a perturbed helical electric field generated by the crash has also been included in the code. It is shown that mixing of the passing alphas is dominated by the magnetic reconnection whereas trapped alphas are affected mainly by ExB drift.

  18. Tritium processing and management during D-T experiments on TFTR

    SciTech Connect

    La Marche, P.H.; Anderson, J.L.; Gentile, C.A.; Hawryluk, R.J.; Hosea, J.; Kalish, M.; Kozub, T.; Murray, H.; Nagy, A.; Raftopoulos, S.

    1994-11-01

    TFTR performance has surpassed many of the previous tokamak records. This has been made possible by the use of tritium as fuel for DT plasma discharges. Stable operations of tritium systems provide for safe, routine DT operation of TFTR. In the preparation for DT operation, in the commissioning of the tritium systems and in the operation of the Nuclear Facility several key lessons have been learned. They include: the facility must take the lead in interpreting the applicable regulations and orders and then seek regulator approval; the use of ultra high vacuum technology in tritium system design and construction simplifies and enhances operations and maintenance; and central facility control under a single supervisory position is crucial to safely orchestrate operational and maintenance activities.

  19. Experimental Investigation of Muon-catalyzed dt Fusion in Wide Ranges of D/T Mixture Conditions

    SciTech Connect

    Bom, V.R.; Eijk, C.W.E. van; Demin, A.M.; Golubkov, A.N.; Grishechkin, S.K.; Klevtsov, V.G.; Kuryakin, A.V.; Musyaev, R.K.; Perevozchikov, V.V.; Vinogradov, Yu.I.; Yukhimchuk, A.A.; Zlatoustovskii, S.V.; Demin, D.L.; Filchenkov, V.V.; Grafov, N.N.; Gritsaj, K.I.; Konin, A.D.; Medved', S.V.; Rudenko, A.I.; Yukhimchuk, S.A.

    2005-04-01

    A vast program of the experimental investigation of muon-catalyzed dt fusion was performed on the Joint Institute for Nuclear Research phasotron. Parameters of the dt cycle were obtained in a wide range of the D/T mixture conditions: temperatures of 20-800 K, densities of 0.2-1.2 of the liquid hydrogen density (LHD), and tritium concentrations of 15-86%. In this paper, the results obtained are summarized.

  20. BNCT dose distribution in liver with epithermal D-D and D-T fusion-based neutron beams.

    PubMed

    Koivunoro, H; Bleuel, D L; Nastasi, U; Lou, T P; Reijonen, J; Leung, K-N

    2004-11-01

    Recently, a new application of boron neutron capture therapy (BNCT) treatment has been introduced. Results have indicated that liver tumors can be treated by BNCT after removal of the liver from the body. At Lawrence Berkeley National Laboratory, compact neutron generators based on (2)H(d,n)(3)He (D-D) or (3)H(t,n)(4)He (D-T) fusion reactions are being developed. Preliminary simulations of the applicability of 2.45 MeV D-D fusion and 14.1 MeV D-T fusion neutrons for in vivo liver tumor BNCT, without removing the liver from the body, have been carried out. MCNP simulations were performed in order to find a moderator configuration for creating a neutron beam of optimal neutron energy and to create a source model for dose calculations with the simulation environment for radiotherapy applications (SERA) treatment planning program. SERA dose calculations were performed in a patient model based on CT scans of the body. The BNCT dose distribution in liver and surrounding healthy organs was calculated with rectangular beam aperture sizes of 20 cm x 20 cm and 25 cm x 25 cm. Collimator thicknesses of 10 and 15 cm were used. The beam strength to obtain a practical treatment time was studied. In this paper, the beam shaping assemblies for D-D and D-T neutron generators and dose calculation results are presented. PMID:15308157

  1. Preliminary Evaluation of the Adequacy of Lithium Resources of the World and China for D-T Fusion Reactors

    NASA Astrophysics Data System (ADS)

    Wang, Yongliang; Ni, Muyi; Jiang, Jieqiong; Wu, Yican; FDS-Team

    2012-07-01

    This paper studied the adequacy of the World and China lithium resources, considering the most promising uses in the future, involving nuclear fusion and electric-vehicles. The lithium recycle model for D-T fusion power plant and electric-vehicles, and the logistic growth prediction model of the primary energy for the World and China were constructed. Based on these models, preliminary evaluation of lithium resources adequacy of the World and China for D-T fusion reactors was presented under certain assumptions. Results show that: a. The world terrestrial reserves of lithium seems too limited to support a significant D-T power program, but the lithium reserves of China are relatively abundant, compared with the world case. b. The lithium resources contained in the oceans can be called the “permanent" energy. c. The change in 6Li enrichment has no obvious effect on the availability period of the lithium resources using FDS-II (Liquid Pb-17Li breeder blanket) type of reactors, but it has a stronger effect when PPCS-B (Solid Li4 SiO4 ceramics breeder blanket) is used.

  2. Two frequency ICRF heating of D-T plasmas on TFTR

    SciTech Connect

    Rogers, J.H.; Majeski, R.; Wilson, J.R.; Hosea, J.C.; Schilling, G.; Stevens, J.; Ho, Y.L.; Raman, S.; Rasmussen, D.A.

    1993-11-01

    Modifications have been made to allow two of the ICRF antennas (bays L and M) on TFTR to operate at either of two frequencies, 43 MHz or 64 MHz. This was accomplished by lengthening the resonant loops feeding the antennas (2{lambda} at 43 MHz, 3{lambda} at 64 MHz) and replacing the conventional quarter wave impedance transformers with a tapered impedance design. The other two antennas (bays K and N) will operate at a fixed frequency, 43 MHz. The two frequency operation allows a combination of {sup 3}He-minority (or T second harmonic) and H-minority heating at full toroidal field on TFIR. Multiple frequency operation may also be useful in direct electron heating and current drive experiments. Other modifications have been made which are expected to permit arbitrary phasing between the current straps on bays M and L. The system design of the antenna, resonant loops and impedance matching system as well as preliminary TFTR results are discussed.

  3. All-optical beam deflection method for simultaneous thermal conductivity and thermo-optic coefficient ( d n / d T ) measurements

    NASA Astrophysics Data System (ADS)

    Putnam, Shawn A.; Fairchild, Steven B.; Arends, Armando A.; Urbas, Augustine M.

    2016-05-01

    This work describes an all-optical beam deflection method to simultaneously measure the thermal conductivity ( Λ) and thermo-optic coefficient ( d n / d T ) of materials that are absorbing at λ = 10.6 μm and are transparent to semi-transparent at λ = 632.8 nm. The technique is based on the principle of measuring the beam deflection of a probe beam (632.8 nm) in the frequency-domain due to a spatially and temporally varying index gradient that is thermally induced by 50:50 split pump beam from a CO2 laser (10.6 μm). The technique and analysis methods are validated with measurements of 10 different optical materials having Λ and d n / d T properties ranging between 0.7 W/m K ≲ Λ ≲ 33.5 W/m K and -12 × 10-6 K-1 ≲ d n / d T ≲ 14 × 10-6 K-1, respectively. The described beam deflection technique is highly related to other well-established, all-optical materials characterization methods, namely, thermal lensing and photothermal deflection spectroscopy. Likewise, due to its all-optical, pump-probe nature, it is applicable to materials characterization in extreme environments with minimal errors due to black-body radiation. In addition, the measurement principle can be extended over a broad range of electromagnetic wavelengths (e.g., ultraviolet to THz) provided the required sources, detectors, and focusing elements are available.

  4. Effect of long term target changes on the neutron yield from a low intensity (d, t) neutron generator

    NASA Astrophysics Data System (ADS)

    Dalton, A. W.

    1987-12-01

    Experimental and theoretical techniques have been developed to determine the accuracy with which the integrated neutron output from a low-intensity (d, t) neutron source can be measured during a prolonged irradiation. The experiments involved a neutron generator in which a fixed solid titanium-tritium target and an unanalysed beam of deuterium ions was used. The analysis was based on differential and integral measurements of both the deuterium beam current and the energy spectra of the charged particles emitted from the multiple nuclear interactions in the target during beam bombardment. The overlapping signals produced by the latter are interpreted using an iterative analysis developed at the Lucas Heights Laboratories.

  5. Interaction of the alternating double stranded copolymer poly(dA-dT) x poly(dA-dT) with NiCl(2) and CdCl(2): solution behavior.

    PubMed

    Airoldi, Marta; Gennaro, Giuseppe; Giomini, Marcello; Giuliani, Anna Maria; Giustini, Mauro

    2007-08-01

    The thermal denaturation of the synthetic high molecular weight double stranded polynucleotide poly(dA-dT) x poly(dA-dT) has been studied in aqueous buffered solution (Tris 1.0 mM; pH 7.8+/-0.2) in the presence of increasing concentrations of either Ni(2+) (borderline cation) or Cd(2+) (soft cation) at four different constant ionic strength values (NaCl), making use of UV and circular dichroism (CD) spectroscopies. The experimental results show that the B-type double helix of the polymer is stabilized against thermal denaturation in the presence of both cations at low concentrations, relative to the systems where only NaCl is present, in the same conditions of ionic strength and pH. The effect is more pronounced for Ni(2+) than for Cd(2+). At higher concentrations, both cations start to destabilize the double helix, with Cd cations inducing larger variations of T(m). In many cases, when denaturation starts, interstrand cross-linking occurs with formation of aggregates that precipitate. PMID:17676940

  6. First evidence of collective alpha particle effect on toroidal Alfv{acute e}n eigenmodes in the TFTR D-T experiment

    SciTech Connect

    Wong, K.L.; Schmidt, G.L.; Batha, S.H.; Bell, R.; Chang, Z.; Chen, L.; Darrow, D.S.; Duong, H.H.; Fu, G.Y.; Hammett, G.W.; Levinton, F.; Majeski, R.; Mazzucato, E.; Nazikian, R.; Owens, D.K.; Petrov, M.; Rogers, J.H.; Schilling, G.; Wilson, J.R.

    1996-03-01

    The alpha particle effect on the excitation of toroidal Alfv{acute e}n eigenmodes (TAE) was investigated in deuterium-titrium (D-T) plasmas in the Tokamak Fusion Test Reactor. rf power was used to position the plasma near the instability threshold, and the alpha particle effect was inferred from the reduction of rf power threshold for TAE instability in D-T plasmas. Initial calculations indicate that the alpha particles contribute 10{percent}{endash}30{percent} of the total drive in a D-T plasma with 3 MW of peak fusion power. {copyright} {ital 1996 The American Physical Society.}

  7. Technique for Forming Solid D2 and D-T Layers for Shock Timing Experiments at the National Ignition Facility

    DOE PAGESBeta

    Sater, J. D.; Espinosa-Loza, F.; Kozioziemski, B.; Mapoles, E. R.

    2016-07-11

    Capsule implosion experiments on the National Ignition Facility (NIF) are driven with a carefully tailored laser pulse that delivers a sequence of shocks to the ablator and fuel. In order to ensure the shocks converge at the desired position, the shock strength and velocity are measured in experimental platforms referred to as keyhole targets. We made shock measurements on capsules completely filled with liquid deuterium for the solid deuterium tritide (D-T) layer campaigns. Modeling has been used to extend these results to form an estimate of the shock properties in solid D-T layers. Furthermore, to verify and improve the surrogacymore » of the liquid-filled keyhole measurements, we have developed a technique to form a solid layer inside the keyhole capsule. The layer is typically uniform over a 400-μm-diameter area. This is sufficient to allow direct measurement of the shock velocity. This layering technique has been successfully applied to 13 experiments on the NIF. The technique may also be applicable to fast-igniter experiments since some proposed designs resemble keyhole targets. We discuss our method in detail and give representative results.« less

  8. An evaluation on the design of beam shaping assembly based on the D-T reaction for BNCT

    NASA Astrophysics Data System (ADS)

    Asnal, M.; Liamsuwan, T.; Onjun, T.

    2015-05-01

    Boron Neutron Capture Therapy (BNCT) can be achieved by using a compact neutron generator such as a compact D-T neutron source, in which neutron energy must be in the epithermal energy range with sufficient flux. For these requirements, a Beam Shaping Assembly (BSA) is needed. In this paper, three BSA designs based on the D-T reaction for BNCT are discussed. It is found that the BSA configuration designed by Rasouli et al. satisfies all of the International Atomic Energy Agency (IAEA) criteria. It consists of 14 cm uranium as multiplier, 23 cm TiF3 and 36 cm Fluental as moderator, 4 cm Fe as fast neutron filter, 1 mm Li as thermal neutron filter, 2.6 cm Bi as gamma ray filter, and Pb as collimator and reflector. It is also found that use of specific filters is important for removing the fast and thermal neutrons and gamma contamination. Moreover, an appropriate neutron source plays a key role in providing a proper epithermal flux.

  9. Effect of medium on charge transport properties of modified poly(dA)-poly(dT) DNA molecular wire

    NASA Astrophysics Data System (ADS)

    Suhendro, D. K.; Yudiarsah, E.; Saleh, R.

    2014-09-01

    By using tight binding Hamiltonian approach, the medium's effect on charge transport properties of modified poly(dA)-poly(dT) DNA molecular wire is studied. The DNA sequences used are modified poly(dA)-poly(dT) sequence by replacing 50 base pairs randomly with GC or CG base pairs. The DNA is contacted by metallic leads at both ends. The medium's effect on DNA is modeled as backbone onsite energy disorder. The DNA is taken to be at room temperature. The charge transport properties of the two sequences are studied by calculating the transmission probabilities of the charges using the scattering and transfer matrix methods simultaneously. Then the current-voltage (I-V) characteristics are calculated from the transmission probabilities using the Landauer-Büttiker Formalism. The theoretical differential conductance curve is then calculated from the I-V characteristic curve. The I-V results show that as the backbone disorder strength increases, the maximum current decreases for both sequences. However, the threshold voltage can increase or decrease with increasing backbone disorder depending on the sequence. The transmission results show that the position of transmission peaks changed with backbone disorder strength. Comparison with previous published results using poly(dG)-poly(dC) sequence shows that in contrast to that sequence, backbone disorder can decrease the threshold voltage in one of the sequences studied. This may point to a new understanding of the interplay between environmental and sequence disorder effect on charge transport in DNA.

  10. Characterization of a Thermo Scientific D711 D-T neutron generator located in a low-scatter facility

    SciTech Connect

    Hayes, John W.; Finn, Erin; Greenwood, Larry; Wittman, Rick

    2014-03-01

    A dosimetry experiment used to measure the neutron flux and spectrum of a D-T neutron generator is presented. The D-T generator at Pacific Northwest National Laboratory is installed in the middle of a large room to minimize scatter of neutrons back to the sample. The efficacy of maintaining a pure fast neutron field for the sample is investigated. Twenty-one positions within 13 cm of the neutron source contained foils or wires of Fe, Ni, Al with additional Au, and In monitors at some locations. Spectral adjustment of the neutron flux at each position based on measured reaction rates and theoretical Monte Carlo calculations show that at least 99.1% of the spectrum lies above 110 keV for all measured positions, and neutrons above 14 MeV can account for as much as 91% at locations along the axis of the generator and close to the source. The 14 MeV component drops to 77% in radial positions far from the source. The largest total flux observed was 8.29E+08 n/cm2-s (±1.4%) in the center of the cooling cap, although additional experiments have shown this value could be as high as 1.20E+09 n/cm2-s.

  11. Molecular characterization of Salmonella Paratyphi B dT+ and Salmonella Heidelberg from poultry and retail chicken meat in Colombia by pulsed-field gel electrophoresis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Salmonella Paratyphi B dT+ variant (also termed Salmonella Java) and Salmonella Heidelberg are human pathogens frequently isolated from poultry. As a step towards implementing the Colombian Integrated Program for Antimicrobial Resistant Surveillance (COIPARS), this study characterized molecular patt...

  12. Investigation on 3D t wake flow structures of swimming bionic fish

    NASA Astrophysics Data System (ADS)

    Shen, G.-X.; Tan, G.-K.; Lai, G.-J.

    2012-10-01

    A bionic experimental platform was designed for the purpose of investigating time accurate three-dimensional flow field, using digital particle image velocimetry (DSPIV). The wake behind the flapping trail of a robotic fish model was studied at high spatial resolution. The study was performed in a water channel. A robot fish model was designed and built. The model was fixed onto a rigid support framework using a cable-supporting method, with twelve stretched wires. The entire tail of the model can perform prescribed motions in two degrees of freedom, mainly in carangiform mode, by driving its afterbody and lunate caudal fin respectively. The DSPIV system was set up to operate in a translational manner, measuring velocity field in a series of parallel slices. Phase locked measurements were repeated for a number of runs, allowing reconstruction of phase average flow field. Vortex structures with phase history of the wake were obtained. The study reveals some new and complex three-dimensional flow structures in the wake of the fish, including "reverse hairpin vortex" and "reverse Karman S-H vortex rings", allowing insight into physics of this complex flow.

  13. Neutron characterization study for D-T, p-7Li neutron sources with new BCA based direct collision coupling method

    NASA Astrophysics Data System (ADS)

    Wang, Guan-bo; Yang, Xin; Qian, Da-zhi; Li, Run-dong; Tang, Bin

    2014-09-01

    The T(D,n)4He and 7Li(p,n)7Be neutron sources have been used for decades in nuclear physics research, stellar nucleosynthesis research and neutron therapy research. In this work, the neutron characterization including neutron yield, spectra, and angular distribution for D-T and p-7Li sources have been studied with our new binary collision approximation (BCA) based direct collision coupling method. Distinguished from the traditional path integration method for getting the neutron weight, the new model establishes a relationship between the scattering cross section and the impact parameter, which allows the secondary neutron generation carrying out jointly with ions BCA tracking. The experimental measurements of neutron characterizations have been employed for these two reactions, and the new algorithm is validated.

  14. An AC phase measuring interferometer for measuring dn/dT of fused silica and calcium fluoride at 193 nm

    SciTech Connect

    Shagam, R.N.

    1998-09-01

    A novel method for the measurement of the change in index of refraction vs. temperature (dn/dT) of fused silica and calcium fluoride at the 193 nm wavelength has been developed in support of thermal modeling efforts for the development of 193 nm-based photolithographic exposure tools. The method, based upon grating lateral shear interferometry, uses a transmissive linear grating to divide a 193 nm laser beam into several beam paths by diffraction which propagate through separate identical material samples. One diffracted order passing through one sample overlaps the undiffracted beam from a second sample and forms interference fringes dependent upon the optical path difference between the two samples. Optical phase delay due to an index change from heating one of the samples causes the interference fringes to change sinusoidally with phase. The interferometer also makes use of AC phase measurement techniques through lateral translation of the grating. Results for several samples of fused silica and calcium fluoride are demonstrated.

  15. Feasibility of sealed D-T neutron generator as neutron source for liver BNCT and its beam shaping assembly.

    PubMed

    Liu, Zheng; Li, Gang; Liu, Linmao

    2014-04-01

    This paper involves the feasibility of boron neutron capture therapy (BNCT) for liver tumor with four sealed neutron generators as neutron source. Two generators are placed on each side of the liver. The high energy of these emitted neutrons should be reduced by designing a beam shaping assembly (BSA) to make them useable for BNCT. However, the neutron flux decreases as neutrons pass through different materials of BSA. Therefore, it is essential to find ways to increase the neutron flux. In this paper, the feasibility of using low enrichment uranium as a neutron multiplier is investigated to increase the number of neutrons emitted from D-T neutron generators. The neutron spectrum related to our system has a proper epithermal flux, and the fast and thermal neutron fluxes comply with the IAEA recommended values. PMID:24448270

  16. Moderator design studies for a new neutron reference source based on the D-T fusion reaction

    NASA Astrophysics Data System (ADS)

    Mozhayev, Andrey V.; Piper, Roman K.; Rathbone, Bruce A.; McDonald, Joseph C.

    2016-06-01

    The radioactive isotope Californium-252 (252Cf) is relied upon internationally as a neutron calibration source for ionizing radiation dosimetry because of its high specific activity. The source may be placed within a heavy-water (D2O) moderating sphere to produce a softened spectrum representative of neutron fields common to commercial nuclear power plant environments, among others. Due to termination of the U.S. Department of Energy loan/lease program in 2012, the expense of obtaining 252Cf sources has undergone a significant increase, rendering high output sources largely unattainable. On the other hand, the use of neutron generators in research and industry applications has increased dramatically in recent years. Neutron generators based on deuteriumtritium (D-T) fusion reaction provide high neutron fluence rates and, therefore, could possibly be used as a replacement for 252Cf. To be viable, the 14 MeV D-T output spectrum must be significantly moderated to approximate common workplace environments. This paper presents the results of an effort to select appropriate moderating materials and design a configuration to reshape the primary neutron field toward a spectrum approaching that from a nuclear power plant workplace. A series of Monte-Carlo (MCNP) simulations of single layer high- and low-Z materials are used to identify initial candidate moderators. Candidates are refined through a similar series of simulations involving combinations of 2-5 different materials. The simulated energy distribution using these candidate moderators are rated in comparison to a target spectrum. Other properties, such as fluence preservation and/or enhancement, prompt gamma production and other characteristics are also considered.

  17. Molecular characterization of Salmonella paratyphi B dT+ and Salmonella Heidelberg from poultry and retail chicken meat in Colombia by pulsed-field gel electrophoresis.

    PubMed

    Donado-Godoy, Pilar; Byrne, Barbara A; Hume, Michael; León, Maribel; Pérez-Gutiérrez, Enriqué; Vives Flores, Martha J; Clavijo, Viviana; Holguin, Ángela; Romero-Zuñiga, Juan J; Castellanos, Ricardo; Tafur, McAllister; Smith, Woutrina A

    2015-04-01

    Salmonella Paratyphi B dT+ variant (also termed Salmonella Java) and Salmonella Heidelberg are pathogens of public health importance that are frequently isolated from poultry. As a step toward implementing the Colombian Integrated Program for Antimicrobial Resistant Surveillance, this study characterized molecular patterns of Salmonella Paratyphi B dT+ and Salmonella Heidelberg isolated from poultry farms, fecal samples, and retail chicken meat using pulsed-field gel electrophoresis (PFGE). The objective of this study was to determine the genetic relationship among isolates and to determine potential geographically predominant genotypes. Based on PFGE analysis, both serovars exhibited high heterogeneity: the chromosomal DNA fingerprints of 82 Salmonella Paratyphi B dT+ isolates revealed 42 PFGE patterns, whereas the 21 isolates of Salmonella Heidelberg revealed 10 patterns. Similar genotypes of both serovars were demonstrated to be present on farms and in retail outlets. For Salmonella Paratyphi B dT+, closely genetically related strains were found among isolates coming from different farms and different integrated poultry companies within two departments (Santander and Cundinamarca) and also from farms located in the two geographically distant departments. For Salmonella Heidelberg, there were fewer farms with genetically related isolates than for Salmonella Paratyphi B dT+. A possible dissemination of similar genotypes of both serovars along the poultry production chain is hypothesized, and some facilitating factors existing in Colombia are reviewed. PMID:25836408

  18. Numerical investigations on a compact magnetic fusion device for studying the effect of external applied magnetic field oscillations on the nuclear burning efficiency of D-T and p-11B fuels

    NASA Astrophysics Data System (ADS)

    Moustaizis, S. D.; Lalousis, P.; Hora, H.; Larour, J.; Auvray, P.; Balcou, P.; Ducret, J.-E.; Martin, P.

    2015-05-01

    The burning process of high density (about 1018cm-3), high temperature (tens to hundreds of keV) plasma trapped by a high mirror-like magnetic field in a Compact Magnetic Fusion (CMF) device is numerically investigated.. The initial high density and high temperature plasma in the CMF device is produced by ultrashort high intensity laser beam interaction with clusters or thin foils, and two fuels, D-T and p-11B are studied. The spatio-temporal evolution of D-T and p-11B plasmas, the production of alphas, the generated electric fields and the high external applied magnetic field are described by a 1-D multifluid code. The initial values for the plasma densities, temperatures and external applied magnetic field (about 100 T) correspond to high β plasmas. The main objectives of the numerical simulations are: to study the plasma trapping, the neutron and alpha production for both fuels, and compare the effect of the external applied magnetic field on the nuclear burning efficiency for the two fuels.. The comparisons and the advantages for each fuel will be presented. The proposed CMF device and the potential operation of the device within the ELI-NP pillar will be discussed.

  19. Optimization of Beam-Shaping Assemblies for BNCS Using the High-Energy Neutron Sources D-D and D-T

    SciTech Connect

    Verbeke, Jerome M.; Chen, Allen S.; Vujic, Jasmina L.; Leung, Ka-Ngo

    2001-06-15

    Boron neutron capture synovectomy is a novel approach for the treatment of rheumatoid arthritis. The goal of the treatment is the ablation of diseased synovial membranes in articulating joints. The treatment of knee joints is the focus of this work. A method was developed, as discussed previously, to predict the dose distribution in a knee joint from any neutron and photon beam spectra incident on the knee. This method is validated and used to design moderators for the deuterium-deuterium (D-D) and deuterium-tritium (D-T) neutron sources. Treatment times >2 h were obtained with the D-D reaction. They could potentially be reduced if the {sup 10}B concentration in the synovium was increased. For D-T neutrons, high therapeutic ratios and treatment times <5 min were obtained for neutron yields of 10{sup 14} s{sup -1}. This treatment time makes the D-T reaction attractive for boron neutron capture synovectomy.

  20. Beam shaping assembly of a D-T neutron source for BNCT and its dosimetry simulation in deeply-seated tumor

    NASA Astrophysics Data System (ADS)

    Faghihi, F.; Khalili, S.

    2013-08-01

    This article involves two aims for BNCT. First case includes a beam shaping assembly estimation for a D-T neutron source to find epi-thermal neutrons which are the goal in the BNCT. Second issue is the percent depth dose calculation in the adult Snyder head phantom. Monte-Carlo simulations and verification of a suggested beam shaping assembly (including internal neutron multiplier, moderator, filter, external neutron multiplier, collimator, and reflector dimensions) for thermalizing a D-T neutron source as well as increasing neutron flux are carried out and our results are given herein. Finally, we have simulated its corresponding doses for treatment planning of a deeply-seated tumor.

  1. Population genetics of dinucleotide (dC-dA)n.(dG-dT)n polymorphisms in world populations.

    PubMed

    Deka, R; Jin, L; Shriver, M D; Yu, L M; DeCroo, S; Hundrieser, J; Bunker, C H; Ferrell, R E; Chakraborty, R

    1995-02-01

    We have characterized eight dinucleotide (dC-dA)n.(dG-dT)n repeat loci located on human chromosome 13q in eight human populations and in a sample of chimpanzees. Even though there is substantial variation in allele frequencies at each locus, at a given locus the most frequent alleles are shared by all human populations. The level of heterozygosity is reduced in isolated or small populations, such as the Pehuenche Indians of Chile, the Dogrib of Canada, and the New Guinea highlanders. On the other hand, larger average heterozygosities are observed in large and cosmopolitan populations, such as the Sokoto population from Nigeria and German Caucasians. Conformity with Hardy-Weinberg equilibrium is generally observed at these loci, unless (a) a population is isolated or small or (b) the repeat motif of the locus is not perfect (e.g., D13S197). Multilocus genotype probabilities at these microsatellite loci do not show departure from the independence rule, unless the loci are closely linked. The allele size distributions at these (CA)n loci do not follow a strict single-step stepwise-mutation model. However, this features does not compromise the ability to detect population affinities, when these loci are used simultaneously. The microsatellite loci examined here are present and, with the exception of the locus D13S197, are polymorphic in the chimpanzees, showing an overlapping distribution of allele sizes with those observed in human populations. PMID:7847383

  2. {sup 233}U breeding measurements in a thorium-oxide blanket assembly using A (d,t) accelerator neutron source

    SciTech Connect

    Anand, R.P.; Basu, T.K.; Ramakrishna, D.V.S.

    1997-05-01

    Uranium-233 breeding studies are carried out in a compact thorium-oxide cylindrical blanket assembly surrounded by a thick polypropylene reflector in a fusion neutron environment. The assembly consists of 11 rings of thorium-oxide rods stacked in a hexagonal geometry with a central through channel for the 14-MeV (d,t) neutron source. A total of 120 thorium-oxide probes are inserted inside the rods in different axial and radial locations in the assembly, which is then subjected to 14-MeV neutron irradiation for 25 h. Protactinium-233 gamma activity produced in the probes because of neutron captures in the thorium is measured using a high-efficiency, high-purity germanium detector. The measured {sup 233}U production rates are fitted to obtain axial and radial distributions for different rings. These distributions are used to obtain the total {sup 233}U breeding in the whole assembly. The integral measured values are found to be in good agreement with the calculated values obtained employing the MCNP Monte Carlo code using the BMCCS2 cross-section library. 8 refs., 4 figs., 5 tabs.

  3. Method for measuring prompt γ-rays generated by D-T neutrons bombarding a depleted uranium spherical shell

    NASA Astrophysics Data System (ADS)

    Qin, Jian-Guo; Lai, Cai-Feng; Jiang, Li; Liu, Rong Zhang, Xin-Wei; Ye, Bang-Jiao; Zhu, Tong-Hua

    2016-01-01

    The prompt γ-ray spectrum from depleted uranium (DU) spherical shells induced by 14 MeV D-T neutrons is measured. Monte Carlo (MC) simulation gives the largest prompt γ flux with the optimal thickness of the DU spherical shells 3-5 cm and the optimal frequency of neutron pulse 1 MHz. The method of time of flight and pulse shape coincidence with energy (DC-TOF) is proposed, and the subtraction of the background γ-rays discussed in detail. The electron recoil spectrum and time spectrum of the prompt γ-rays are obtained based on a 2″×2″ BC501A liquid scintillator detector. The energy spectrum and time spectrum of prompt γ-rays are obtained based on an iterative unfolding method that can remove the influence of γ-rays response matrix and pulsed neutron shape. The measured time spectrum and the calculated results are roughly consistent with each other. Experimental prompt γ-ray spectrum in the 0.4-3 MeV energy region agrees well with MC simulation based on the ENDF/BVI.5 library, and the discrepancies for the integral quantities of γ-rays of energy 0.4-1 MeV and 1-3 MeV are 9.2% and 1.1%, respectively. Supported by National Special Magnetic Confinement Fusion Energy Research, China (2015GB108001) and National Natural Science Foundation of China (91226104)

  4. Proposed experiment to investigate use of heated optical fibers for tokamak diagnostics during D-T discharges

    SciTech Connect

    Tighe, W.; Morgan, P.; Griscom, D.; Adler, H.; Cylinder, D.; Johnson, D.; Palladino, D.; Ramsey, A.

    1995-02-01

    A collaborative JET/TFTR study has been undertaken to investigate attenuation and luminescence effects due to neutron irradiation of optical fibers heated to 400{degrees}C. It is expected that a significant improvement in fiber behavior will be observed due to thermal annealing. This technique may be important for use in fiber-related, tokamak diagnostics exposed to high neutron flux. The study will make use of aluminum jacketed, 600 {mu}m diameter, all silica (F-doped cladding) fibers in lengths of 150 m. The fibers are prepared in 1 foot coils. Of the coils to be irradiated, one is heated constantly to 400{degrees}C, a second is not heated, and a third is heated periodically. A fourth fiber coil is not to be irradiated. Spectrally and temporally resolved transmission and luminescence data under neutron irradiation during D-T discharges on TFTR will be obtained. An investigation of permanent and short term effects will be made. Experimental details along with initial results will be presented.

  5. Reactor applications of the Compact Fusion Advanced Rankine (CFAR) cycle for a D-T tokamak fusion reactor

    NASA Astrophysics Data System (ADS)

    Hoffman, H. A.; Logan, B. G.; Campbell, R. B.

    1988-03-01

    A preliminary design of a D-T fusion reactor blanket and MHD power conversion system is made based on the CFAR concept, and it was found that performance and costs for the reference cycle are very attractive. While much remains to be done, the potential advantage of liquid metal Rankine cycles for fusion applications are much clearer now. These include low pressures and mass flow rates, a nearly isothermal module shell which minimizes problems of thermal distortion and stresses, and an insensitivity to pressure losses in the blanket so that the two-phase MHD pressure drops in the boiling part of the blanket and the ordinary vapor pressure drops in the pebble-bed superheating zones are acceptable (the direct result of pumping a liquid rather than having to compress a gas). There are no moving parts in the high-temperature MHD power generators, no steam bottoming plant is required, only small vapor precoolers and condensers are needed because of the high heat rejection temperatures, and only a relatively small natural-draft heat exchanger is required to reject the heat to the atmosphere. The net result is a very compact fusion reactor and power conversion system which fit entirely inside an 18 meter radius reactor vault. Although a cost analysis has not yet been performed, preliminary cost estimates indicate low capital costs and a very attractive cost of electricity.

  6. Sequence and temperature effect on electrical properties of modified poly(dA)-poly(dT) DNA wire

    NASA Astrophysics Data System (ADS)

    Suhendro, Daniel K.; Yudiarsah, Efta; Saleh, Rosari

    2016-03-01

    We studied the effect of thermal fluctuations on charge transport in two types of modified poly(dA)-poly(dT) DNA by calculating the transmission probability and I-V characteristics. The modification is carried out by replacing some of the AT base pairs with CG or GC base pairs placed randomly along the chain. The DNA model is placed in between two metallic electrodes. We used tight binding Hamiltonian to model the DNA molecule and electrodes. The thermal fluctuation is modeled by varying the twist angles of each base in the DNA. The transfer matrix and scattering matrix methods were employed in calculating the transmission probability. Transmission probability is used as an input in calculating I-V characteristics using Landauer-Büttiker formalism. The twist angle disorder is influenced by the temperature and frequency. In order to prevent spurious results, we take the average value transmission probability of 1000 realizations of twist angles. Our results indicate that the DNA modified by CG base pairs has its electrical properties impeded by increasing thermal fluctuation (increasing temperature and decreasing frequency). However, different behavior is observed on the DNA modified by GC base pairs, at low temperature its electrical properties are enhanced by decreasing frequency. Moreover, electrical properties of this DNA at high frequency are also enhanced as temperature increases.

  7. Population genetics of dinucleotide (dC-dA)n.(dG-dT)n polymorphisms in world populations.

    PubMed Central

    Deka, R; Jin, L; Shriver, M D; Yu, L M; DeCroo, S; Hundrieser, J; Bunker, C H; Ferrell, R E; Chakraborty, R

    1995-01-01

    We have characterized eight dinucleotide (dC-dA)n.(dG-dT)n repeat loci located on human chromosome 13q in eight human populations and in a sample of chimpanzees. Even though there is substantial variation in allele frequencies at each locus, at a given locus the most frequent alleles are shared by all human populations. The level of heterozygosity is reduced in isolated or small populations, such as the Pehuenche Indians of Chile, the Dogrib of Canada, and the New Guinea highlanders. On the other hand, larger average heterozygosities are observed in large and cosmopolitan populations, such as the Sokoto population from Nigeria and German Caucasians. Conformity with Hardy-Weinberg equilibrium is generally observed at these loci, unless (a) a population is isolated or small or (b) the repeat motif of the locus is not perfect (e.g., D13S197). Multilocus genotype probabilities at these microsatellite loci do not show departure from the independence rule, unless the loci are closely linked. The allele size distributions at these (CA)n loci do not follow a strict single-step stepwise-mutation model. However, this features does not compromise the ability to detect population affinities, when these loci are used simultaneously. The microsatellite loci examined here are present and, with the exception of the locus D13S197, are polymorphic in the chimpanzees, showing an overlapping distribution of allele sizes with those observed in human populations. Images Figure 1 PMID:7847383

  8. Prompt-gamma neutron activation analysis system design: Effects of D-T versus D-D neutron generator source selection

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Prompt-gamma neutron activation (PGNA) analysis is used for the non-invasive measurement of human body composition. Advancements in portable, compact neutron generator design have made those devices attractive as neutron sources. Two distinct generators are available: D-D with 2.5 MeV and D-T with...

  9. Prompt-gamma neutron activation analysis system design: effects of D-T versus D-D neutron generator source selection

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Prompt-gamma neutron activation analysis (PGNAA) is used for the non-invasive measurement of human body composition. Advancements in portable, compact neutron generator design have made those devices attractive as neutron sources. Two distinct generators are available: D-D with 2.5 MeV, and D-T wi...

  10. Monte Carlo simulation of moderator and reflector in coal analyzer based on a D-T neutron generator.

    PubMed

    Shan, Qing; Chu, Shengnan; Jia, Wenbao

    2015-11-01

    Coal is one of the most popular fuels in the world. The use of coal not only produces carbon dioxide, but also contributes to the environmental pollution by heavy metals. In prompt gamma-ray neutron activation analysis (PGNAA)-based coal analyzer, the characteristic gamma rays of C and O are mainly induced by fast neutrons, whereas thermal neutrons can be used to induce the characteristic gamma rays of H, Si, and heavy metals. Therefore, appropriate thermal and fast neutrons are beneficial in improving the measurement accuracy of heavy metals, and ensure that the measurement accuracy of main elements meets the requirements of the industry. Once the required yield of the deuterium-tritium (d-T) neutron generator is determined, appropriate thermal and fast neutrons can be obtained by optimizing the neutron source term. In this article, the Monte Carlo N-Particle (MCNP) Transport Code and Evaluated Nuclear Data File (ENDF) database are used to optimize the neutron source term in PGNAA-based coal analyzer, including the material and shape of the moderator and neutron reflector. The optimized targets include two points: (1) the ratio of the thermal to fast neutron is 1:1 and (2) the total neutron flux from the optimized neutron source in the sample increases at least 100% when compared with the initial one. The simulation results show that, the total neutron flux in the sample increases 102%, 102%, 85%, 72%, and 62% with Pb, Bi, Nb, W, and Be reflectors, respectively. Maximum optimization of the targets is achieved when the moderator is a 3-cm-thick lead layer coupled with a 3-cm-thick high-density polyethylene (HDPE) layer, and the neutron reflector is a 27-cm-thick hemispherical lead layer. PMID:26325583

  11. Fast Screening of Whole Blood Samples and Pharmaceutical Compounds for Enantiorecognition of Free L-T3 , L-T4 , and D-T4.

    PubMed

    Mitrofan, Grigorina; Stefan-van Staden, Raluca-Ioana; Comnea-Stancu, Ionela Raluca; van Staden, Jacobus Frederick; Bazylak, Grzegorz; Kapnissi-Christodoulou, Constantina P; Aboul-Enein, Hassan Y

    2015-12-01

    A fast screening method of whole blood was proposed for enantiorecognition of free L-T3 , L-T4 , and D-T4 . Stochastic microsensors based on four inulins (IN, IQ, TEX, and HD) immobilized on diamond paste (DP) were used for recognition of free L-T3 , L-T4 , and D-T4 . For the enantiorecognition of free L-T4 and D-T4 in whole blood and pharmaceutical samples, the best microsensor was the one based on TEX/DP (wide linear concentration ranges, and low limits of quantification). The best limit of detection for the assay of free L-T3 (400 fmol/L) was recorded using the microsensors based on HD/DP, while for the assay of free L-T4, and D-T4 the best limit of determination (1 pmol/L) was recorded using the TX/DP-based microsensor. For the enantiorecognition of free L-T3 in whole blood and pharmaceutical samples the best microsensor was the one based on HD/DP (the wider linear concentration range, and the lower limit of quantification - of pmol/L magnitude order). For the enantiorecognition of free L-T3 in whole blood and pharmaceutical samples the best microsensor was the one based on HD/DP (the wider linear concentration range, and the lower limit of quantification - of pmol/L magnitude order). Free L-T3 , L-T4 , and D-T4 were recovered with high reliabilities in whole blood samples (recoveries higher than 99.00%, with RSD values lower than 1.00%) and pharmaceutical samples (recoveries higher than 95.00% with RSD values lower than 1.00%). PMID:26447904

  12. (dC-dA)n.(dG-dT)n sequences have evolutionarily conserved chromosomal locations in Drosophila with implications for roles in chromosome structure and function.

    PubMed Central

    Pardue, M L; Lowenhaupt, K; Rich, A; Nordheim, A

    1987-01-01

    In situ hybridization of (dC-dA)n.(dG-dT)n to the polytene chromosomes of Drosophila melanogaster reveals a clearly non-random distribution of chromosomal sites for this sequence. Sites are distributed over most euchromatic regions but the density of sites along the X chromosome is significantly higher than the density over the autosomes. All autosomes show approximately equal levels of hybridization except chromosome 4 which has no detectable stretches of (dC-dA)n.(dG-dT)n. Another striking feature is the lack of hybridization of the beta-heterochromatin of the chromocenter. The specific sites are conserved between different strains of D. melanogaster. The same overall chromosomal pattern of hybridization is seen for the other Drosophila species studied, including D. simulans, a sibling species with a much lower content of middle repetitive DNA, and D. virilis, a distantly related species. The evolutionary conservation of the distribution of (dC-dA)n.(dG-dT)n suggests that these sequences are of functional importance. The distribution patterns seen for D. pseudoobscura and D. miranda raise interesting speculations about function. In these species a chromosome equivalent to an autosomal arm of D. melanogaster has been translocated onto the X chromosome and acquired dosage compensation. In each species the new arm of the X also has a higher density of (dC-dA)n.(dG-dT)n similar to that seen on other X chromosomes. In addition to correlations with dosage compensation, the depletion of (dC-dA)n.(dG-dT)n in beta-heterochromatin and chromosome 4 may also be related to the fact that these regions do not normally undergo meiotic recombination. Images Fig. 1. Fig. 2. Fig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8. Fig. 9. Fig. 10. PMID:3111846

  13. The operation of the Tokamak Fusion Test Reactor Tritium Facility

    SciTech Connect

    Gentile, C.A.; LaMarche, P.H.; Anderson, J.L.

    1995-07-01

    The TFTR tritium operations staff has successfully received, stored, handled, and processed over five hundred thousand curies of tritium for the purpose of supporting D-T (Deuterium-Tritium) operations at TFTR. Tritium operations personnel nominally provide continuous round the clock coverage (24 hours/day, 7 days/week) in shift complements consisting of I supervisor and 3 operators. Tritium Shift Supervisors and operators are required to have 5 years of operational experience in either the nuclear or chemical industry and to become certified for their positions. The certification program provides formal instruction, as well as on the job training. The certification process requires 4 to 6 months to complete, which includes an oral board lasting up to 4 hours at which time the candidate is tested on their knowledge of Tritium Technology and TFTR Tritium systems. Once an operator is certified, the training process continues with scheduled training weeks occurring once every 5 weeks. During D-T operations at TFTR the operators must evacuate the tritium area due to direct radiation from TFTR D-T pulses. During `` time operators maintain cognizance over tritium systems via a real time TV camera system. Operators are able to gain access to the Tritium area between TFTR D-T pulses, but have been excluded from die tritium area during D-T pulsing for periods up to 30 minutes. Tritium operators are responsible for delivering tritium gas to TFRR as well as processing plasma exhaust gases which lead to the deposition of tritium oxide on disposable molecular sieve beds (DMSB). Once a DMSB is loaded, the operations staff remove the expended DMSB, and replace it with a new DMSB container. The TFIR tritium system is operated via detailed procedures which require operator sign off for system manipulation. There are >300 procedures controlling the operation of the tritium systems.

  14. DNA-like duplexes with repetitions. I. Properties of concatemer duplexes formed by d(T-G-C-A-C-A-T-G).

    PubMed Central

    Shabarova, Z A; Dolinnaya, N G; Turkin, S I; Gromova, E S

    1980-01-01

    A new class of synthetic DNA duplexes containing repeating oligonucleotide sequences, double-helical concatemers, is characterized. The UV-absorption and circular dichroism of a concatemer formed in self-association of d(T-G-C-A-C-A-T-G) have been studied. The thermodynamical parameters of complex formation are the following: delta Ho1 = -9.2 +/- 0.3 kcal/mol, delta So1 = -27 +/- 1 e.u. The data obtained show that pseudopolymeric duplexes having structures that are similar to DNA-B-type helices are formed in solutions of d(T-G-C-A-C-A-T-G). Polymerization of 32P-d(pT-G-C-A-C-A-T-G) induced by water-soluble carbodiimide has been carried out under the conditions of concatemer stability. The yield of the dimer, a 16-member oligonucleotide, was 13%. Images PMID:7443510

  15. Altering the Electrostatic Potential in the Major Groove: Thermodynamic and Structural Characterization of 7-Deaza-2′-deoxyadenosine:dT Base Pairing in DNA

    PubMed Central

    2011-01-01

    As part of an ongoing effort to explore the effect of major groove electrostatics on the thermodynamic stability and structure of DNA, a 7-deaza-2′-deoxyadenosine:dT (7-deaza-dA:dT) base pair in the Dickerson–Drew dodecamer (DDD) was studied. The removal of the electronegative N7 atom on dA and the replacement with an electropositive C–H in the major groove was expected to have a significant effect on major groove electrostatics. The structure of the 7-deaza-dA:dT base pair was determined at 1.1 Å resolution in the presence of Mg2+. The 7-deaza-dA, which is isosteric for dA, had minimal effect on the base pairing geometry and the conformation of the DDD in the crystalline state. There was no major groove cation association with the 7-deaza-dA heterocycle. In solution, circular dichroism showed a positive Cotton effect centered at 280 nm and a negative Cotton effect centered at 250 nm that were characteristic of a right-handed helix in the B-conformation. However, temperature-dependent NMR studies showed increased exchange between the thymine N3 imino proton of the 7-deaza-dA:dT base pair and water, suggesting reduced stacking interactions and an increased rate of base pair opening. This correlated with the observed thermodynamic destabilization of the 7-deaza-dA modified duplex relative to the DDD. A combination of UV melting and differential scanning calorimetry experiments were conducted to evaluate the relative contributions of enthalpy and entropy in the thermodynamic destabilization of the DDD. The most significant contribution arose from an unfavorable enthalpy term, which probably results from less favorable stacking interactions in the modified duplex, which was accompanied by a significant reduction in the release of water and cations from the 7-deaza-dA modified DNA. PMID:22059929

  16. Altering the Electrostatic Potential in the Major Groove: Thermodynamic and Structural Characterization of 7-Deaza-2;#8242;-deoxyadenosine:dT Base Pairing in DNA

    SciTech Connect

    Kowal, Ewa A.; Ganguly, Manjori; Pallan, Pradeep S.; Marky, Luis A.; Gold, Barry; Egli, Martin; Stone, Michael P.

    2012-02-15

    As part of an ongoing effort to explore the effect of major groove electrostatics on the thermodynamic stability and structure of DNA, a 7-deaza-2'-deoxyadenosine:dT (7-deaza-dA:dT) base pair in the Dickerson-Drew dodecamer (DDD) was studied. The removal of the electronegative N7 atom on dA and the replacement with an electropositive C-H in the major groove was expected to have a significant effect on major groove electrostatics. The structure of the 7-deaza-dA:dT base pair was determined at 1.1 {angstrom} resolution in the presence of Mg{sup 2+}. The 7-deaza-dA, which is isosteric for dA, had minimal effect on the base pairing geometry and the conformation of the DDD in the crystalline state. There was no major groove cation association with the 7-deaza-dA heterocycle. In solution, circular dichroism showed a positive Cotton effect centered at 280 nm and a negative Cotton effect centered at 250 nm that were characteristic of a right-handed helix in the B-conformation. However, temperature-dependent NMR studies showed increased exchange between the thymine N3 imino proton of the 7-deaza-dA:dT base pair and water, suggesting reduced stacking interactions and an increased rate of base pair opening. This correlated with the observed thermodynamic destabilization of the 7-deaza-dA modified duplex relative to the DDD. A combination of UV melting and differential scanning calorimetry experiments were conducted to evaluate the relative contributions of enthalpy and entropy in the thermodynamic destabilization of the DDD. The most significant contribution arose from an unfavorable enthalpy term, which probably results from less favorable stacking interactions in the modified duplex, which was accompanied by a significant reduction in the release of water and cations from the 7-deaza-dA modified DNA.

  17. Microtubule-associated protein MAP2 preferentially binds to a dA/dT sequence present in mouse satellite DNA.

    PubMed Central

    Avila, J; Montejo de Garcini, E; Wandosell, F; Villasante, A; Sogo, J M; Villanueva, N

    1983-01-01

    Microtubule-associated protein MAP2 binds to the Sau96.1 restriction monomer fragment of mouse satellite DNA. This fragment is also present in a lower proportion in bulk DNA. The digestion of MAP2-Sau96.1 fragment complex by DNase results in the protection of certain nucleotide sequences. The sequence poly(dA)4/poly(dT)4 is mainly protected against DNase digestion. Images Fig. 1. Fig. 2. Fig. 3. Fig. 5. PMID:10872313

  18. Experimental investigation of radioactivity induced in the fusion power plant structural material in Eurofer and in other steels by D?T neutrons

    NASA Astrophysics Data System (ADS)

    Seidel, K.; Forrest, R. A.; Freiesleben, H.; Kovalchuk, V. D.; Markovskij, D. V.; Maximov, D. V.; Unholzer, S.

    2002-12-01

    The low-activation steel Eurofer was irradiated with D-T fusion neutrons. The radioactivity following irradiation was determined several times during decay by γ-spectroscopy. The results were analysed with the European Activation System (EASY-99). Ratios of calculated-to-experimental values for individual activities and for their sums are discussed in connection with the expected low-activation behaviour of the material in fusion power plant conditions.

  19. Interferometric measurement of the temperature coefficient of the refractive index dn/dT and the coefficient of thermal expansion of Pr:YLF laser crystals.

    PubMed

    Kazasidis, Orestis S; Wittrock, Ulrich

    2014-12-15

    We report interferometric measurements of the temperature coefficient of the refractive index (dn/dT) and the coefficient of thermal expansion (α) of a praseodymium-doped yttrium lithium fluoride (Pr:YLF) crystal and of a fused silica reference sample. Our phase-resolved interferometric method yields a large number of data points and thus allows a precise measurement and a good error estimation. Furthermore, both dn/dT and α are obtained simultaneously from a single measurement which reduces errors that can occur in separate measurements. Over the temperature range from 20 °C to 80 °C, the value of dn/dT of Pr:YLF decreases from −5.2 × 10(−6)/K to −6.2 × 10(−6)/K for the ordinary refractive index and from −7.6 × 10(−6)/K to −8.6 × 10(−6)/K for the extraordinary refractive index. The coefficient of thermal expansion for the a-axis of Pr:YLF increases from 16.4 × 10(−6)/K to 17.8 × 10(−6)/K over the same temperature range. PMID:25607016

  20. Surface roughness statistics and temperature step stress effects for D-T solid layers equilibrated inside a 2 mm beryllium torus

    SciTech Connect

    Sheliak, J.D.; Hoffer, J.K.

    1998-12-31

    Solid D-T layers are equilibrated inside a 2 mm diameter beryllium toroidal cell at temperatures ranging from 19.0 K to 19.6 K, using the beta-layering process. The experimental runs consists of multiple cycles of rapid- or slow-freezing of the initially liquid D-T charge, followed by a lengthy period of beta-layering equilibration, terminated by melting the layer. The temperature was changed in discrete steps at the end of some equilibration cycles in an attempt to simulate actual ICF target conditions. High-precision images of the D-T solid-vapor interface were analyzed to yield the surface roughness {sigma}{sub mns} as a sum of modal contributions. Results show an overage {sigma}{sub mns} of 1.3 {+-} 0.3 {micro}m for layers equilibrated at 19.0 K and show an inverse dependence of {sigma}{sub mns} on equilibration temperature up to 19.525 K. Inducing sudden temperature perturbations lowered {sigma}{sub mns} to 1.0 {+-} 0.05 {micro}m.

  1. Benchmarking the Geant4 full system simulation of an associated alpha-particle detector for use in a D-T neutron generator.

    PubMed

    Zhang, Xiaodong; Hayward, Jason P; Cates, Joshua W; Hausladen, Paul A; Laubach, Mitchell A; Sparger, Johnathan E; Donnald, Samuel B

    2012-08-01

    The position-sensitive alpha-particle detector used to provide the starting time and initial direction of D-T neutrons in a fast-neutron imaging system was simulated with a Geant4-based Monte Carlo program. The whole detector system, which consists of a YAP:Ce scintillator, a fiber-optic faceplate, a light guide, and a position-sensitive photo-multiplier tube (PSPMT), was modeled, starting with incident D-T alphas. The scintillation photons, whose starting time follows the distribution of a scintillation decay curve, were produced and emitted uniformly into a solid angle of 4π along the track segments of the alpha and its secondaries. Through tracking all photons and taking into account the quantum efficiency of the photocathode, the number of photoelectrons and their time and position distributions were obtained. Using a four-corner data reconstruction formula, the flood images of the alpha detector with and without optical grease between the YAP scintillator and the fiber-optic faceplate were obtained, which show agreement with the experimental results. The reconstructed position uncertainties of incident alpha particles for both cases are 1.198 mm and 0.998 mm respectively across the sensitive area of the detector. Simulation results also show that comparing with other faceplates composed of 500 μm, 300 μm, and 100 μm fibers, the 10-μm-fiber faceplate is the best choice to build the detector for better position performance. In addition, the study of the background originating inside the D-T generator suggests that for 500-μm-thick YAP:Ce coated with 1-μm-thick aluminum, and very good signal-to-noise ratio can be expected through application of a simple threshold. PMID:22728838

  2. Different behavior of the octadeoxynucleotides d(A-T)4 and d(T-A)4 at high concentrations of cesium fluoride.

    PubMed

    Vorlícková, M; Birch-Hirschfeld, E; Lang, H; Kypr, J

    1986-09-30

    High CsF concentrations induce a zig-zag double helix, which we call X-DNA, in poly d(A-T) and also in the octadeoxynucleotide d(T-A)4 while d(A-T)4 remains fixed in a B-DNA form. Intermolecular contacts promote the B-X isomerization of the former oligonucleotide but induce aggregation of the latter. This indicates that there is an intramolecular factor, presumably base stacking in the T-A steps, stabilizing the X-DNA conformation. PMID:3767996

  3. TFTR tritium operations lessons learned

    SciTech Connect

    Gentile, C.A.; Raftopoulos, S.; LaMarche, P.

    1996-12-31

    The Tokamak Fusion Test Reactor which is the progenitor for full D-T operating tokamaks has successfully processed > 81 grams of tritium in a safe and efficient fashion. Many of the fundamental operational techniques associated with the safe movement of tritium through the TFTR facility were developed over the course of many years of DOE tritium facilities (LANL, LLNL, SRS, Mound). In the mid 1980`s The Tritium Systems Test Assembly (TSTA) at LANL began reporting operational techniques for the safe handling of tritium, and became a major conduit for the transfer of safe tritium handling technology from DOE weapons laboratories to non-weapon facilities. TFTR has built on many of the TSTA operational techniques and has had the opportunity of performing and enhancing these techniques at America`s first operational D-T fusion reactor. This paper will discuss negative pressure employing `elephant trunks` in the control and mitigation of tritium contamination at the TFTR facility, and the interaction between contaminated line operations and {Delta} pressure control. In addition the strategy employed in managing the movement of tritium through TFTR while maintaining an active tritium inventory of < 50,000 Ci will be discussed. 5 refs.

  4. A detailed reactive cross section study of X + Li2 → Li + LiX, with X = H, D, T, and Mu.

    PubMed

    da Cunha, Wiliam F; Leal, Luciano A; da Cunha, Thiago F; e Silva, Geraldo M; Martins, João B L; Gargano, Ricardo

    2014-07-01

    In this work we apply quasiclassical trajectory theory to the X + Li2 → Li + LiX reactions, with X standing for H, D, T, and Mu, in order to determine dynamical properties such as state-to-state reactive cross-section, rotational, vibrational, and translational product distributions. By using the literature benchmark potential energy surface, we were able to predict the aforementioned dynamical property in remarkable qualitative agreement with data in the literature for the H + Li2 → Li + LiH channel. Particularly, our results points toward the well known cross section independence with ro-vibrational excitations for high excitation regimes. Since the methodology is known to be well suited for the other species, as we considered the same PES, our results are expected to be similarly accurate for D, T, and Mu. The present work consists on a significant progress in this area of research, since previous theoretical calculations-based on known potential energy surface-deviated from the experimental results. PMID:24997613

  5. Design and optimization of a beam shaping assembly for BNCT based on D-T neutron generator and dose evaluation using a simulated head phantom.

    PubMed

    Rasouli, Fatemeh S; Masoudi, S Farhad

    2012-12-01

    A feasibility study was conducted to design a beam shaping assembly for BNCT based on D-T neutron generator. The optimization of this configuration has been realized in different steps. This proposed system consists of metallic uranium as neutron multiplier, TiF(3) and Al(2)O(3) as moderators, Pb as reflector, Ni as shield and Li-Poly as collimator to guide neutrons toward the patient position. The in-air parameters recommended by IAEA were assessed for this proposed configuration without using any filters which enables us to have a high epithermal neutron flux at the beam port. Also a simulated Snyder head phantom was used to evaluate dose profiles due to the irradiation of designed beam. The dose evaluation results and depth-dose curves show that the neutron beam designed in this work is effective for deep-seated brain tumor treatments even with D-T neutron generator with a neutron yield of 2.4×10(12) n/s. The Monte Carlo Code MCNP-4C is used in order to perform these calculations. PMID:23041781

  6. Localization properties of electronic states in a polaron model of poly(dG)-poly(dC) and poly(dA)-poly(dT) DNA polymers.

    PubMed

    Yamada, H; Starikov, E B; Hennig, D; Archilla, J F R

    2005-06-01

    We numerically investigate localization properties of electronic states in a static model of poly(dG)-poly(dC) and poly(dA)-poly(dT) DNA polymers with realistic parameters obtained by quantum-chemical calculation. The randomness in the on-site energies caused by the electron-phonon coupling is completely correlated to the off-diagonal parts. In the single electron model, the effect of the hydrogen-bond stretchings, the twist angles between the base pairs and the finite system size effects on the energy dependence of the localization length and on the Lyapunov exponent are given. The localization length is reduced by the influence of the fluctuations in the hydrogen bond stretchings. It is also shown that the helical twist angle affects the localization length in the poly(dG)-poly(dC) DNA polymer more strongly than in the poly(dA)-poly(dT) one. Furthermore, we show resonance structures in the energy dependence of the localization length when the system size is relatively small. PMID:15906117

  7. B0d(t)→π+π- and B0s(t)→K+K- decays: A tool to measure new-physics parameters

    NASA Astrophysics Data System (ADS)

    London, David; Matias, Joaquim; Virto, Javier

    2005-01-01

    If physics beyond the standard model is present in B decays, experimental measurements seem to suggest that it principally affects those processes with significant b¯→s¯ penguin amplitudes. It was recently argued that, in general, such new-physics (NP) effects can be parametrized in terms of a single NP amplitude Aq and phase Φq, for q=u,d,s,c. In this paper, we show that the study of the decays B0s(t)→K+K- and B0d(t)→π+π- allows one to measure the NP parameters Au and Φu. We examine the implications for this method of the latest experimental results on these decays. If NP is found in B0s(t)→K+K-, it can be partially identified through measurements of B0s(t)→K0K¯0.

  8. Design of a high-current low-energy beam transport line for an intense D-T/D-D neutron generator

    NASA Astrophysics Data System (ADS)

    Lu, Xiaolong; Wang, Junrun; Zhang, Yu; Li, Jianyi; Xia, Li; Zhang, Jie; Ding, Yanyan; Jiang, Bing; Huang, Zhiwu; Ma, Zhanwen; Wei, Zheng; Qian, Xiangping; Xu, Dapeng; Lan, Changlin; Yao, Zeen

    2016-03-01

    An intense D-T/D-D neutron generator is currently being developed at the Lanzhou University. The Cockcroft-Walton accelerator, as a part of the neutron generator, will be used to accelerate and transport the high-current low-energy beam from the duoplasmatron ion source to the rotating target. The design of a high-current low-energy beam transport (LEBT) line and the dynamics simulations of the mixed beam were carried out using the TRACK code. The results illustrate that the designed beam line facilitates smooth transportation of a deuteron beam of 40 mA, and the number of undesired ions can be reduced effectively using two apertures.

  9. Development of high-intensity D-D and D-T neutron sources and neutron filters for medical and industrial applications

    SciTech Connect

    Verbeke, J.M.

    2000-05-10

    This thesis consists of three main parts. The first one relates to boron neutron capture therapy. It summarizes the guidelines obtained by numerical simulations for the treatment of shallow and deep-seated brain tumors, as well as the results on the design of beam-shaping assemblies to moderate D-D and D-T neutrons to epithermal energies. The second part is about boron neutron capture synovectomy for the treatment of rheumatoid arthritis. Optimal neutron energy for treatment and beam-shaping assembly designs are summarized in this section. The last part is on the development of the sealed neutron generator, including experimental results on the prototype ion source and the prototype accelerator column.

  10. Slope, curvature, and higher parameters in p p and p ¯p scattering, and the extrapolation of measurements of d σ (s ,t )/d t to t =0

    NASA Astrophysics Data System (ADS)

    Block, Martin M.; Durand, Loyal; Ha, Phuoc; Halzen, Francis

    2016-06-01

    We study the effects of curvature in the expansion of the logarithm of the differential elastic scattering cross section near t =0 as d σ (s ,t )/d t =d σ (s ,0 )/d t ×exp (B t +C t2+D t3⋯) in an eikonal model for p p and p ¯p scattering, and use the results to discuss the extrapolation of measured differential cross sections and the slope parameters B to t =-q2=0 . We find that the curvature effects represented by the parameters C and D , while small, lead to significant changes in the forward slope parameter relative to that determined in a purely exponential fit, and to smaller but still significant changes in the forward elastic scattering and total cross sections. Curvature effects should therefore be considered in future analyses or reanalyses of the elastic scattering data.

  11. Circular dichroism of polynucleotides: Interactions of NiCl2 with poly(dA-dT).poly(dA-dT) and poly(dG-dC).poly(dG-dC) in a water-in-oil microemulsion.

    PubMed

    Airoldi, Marta; Gennaro, Giuseppe; Giomini, Marcello; Giuliani, Anna Maria; Giustini, Mauro

    2008-09-01

    The thermal behavior of the synthetic, high molecular weight, double stranded polynucleotides poly(dA-dT).poly(dA-dT) [polyAT] and poly(dG-dC).poly(dG-dC) [polyGC] solubilized in the aqueous core of the quaternary water-in-oil cationic microemulsion CTAB|n-pentanol|n-hexane|water in the presence of increasing amounts of NiCl(2) at several constant ionic strength values (NaCl) has been studied by means of circular dichroism and electronic absorption spectroscopies. In the microemulsive medium, both polynucleotides show temperature-induced modifications that markedly vary with both Ni(II) concentration and ionic strength. An increase of temperature causes denaturation of the polyAT duplex at low nickel concentrations, while more complex CD spectral modifications are observed at higher nickel concentrations and ionic strengths. By contrast, thermal denaturation is never observed for polyGC. At low Ni(II) concentrations, the increase of temperature induces conformational transitions from B-DNA to Z-DNA form, or, more precisely, to left-handed helical structures. In some cases, at higher nickel concentrations, the CD spectra suggest the presence of Z'-type forms of the polynucleotide. PMID:18246552

  12. Image based cardiac acceleration map using statistical shape and 3D+t myocardial tracking models; in-vitro study on heart phantom

    NASA Astrophysics Data System (ADS)

    Pashaei, Ali; Piella, Gemma; Planes, Xavier; Duchateau, Nicolas; de Caralt, Teresa M.; Sitges, Marta; Frangi, Alejandro F.

    2013-03-01

    It has been demonstrated that the acceleration signal has potential to monitor heart function and adaptively optimize Cardiac Resynchronization Therapy (CRT) systems. In this paper, we propose a non-invasive method for computing myocardial acceleration from 3D echocardiographic sequences. Displacement of the myocardium was estimated using a two-step approach: (1) 3D automatic segmentation of the myocardium at end-diastole using 3D Active Shape Models (ASM); (2) propagation of this segmentation along the sequence using non-rigid 3D+t image registration (temporal di eomorphic free-form-deformation, TDFFD). Acceleration was obtained locally at each point of the myocardium from local displacement. The framework has been tested on images from a realistic physical heart phantom (DHP-01, Shelley Medical Imaging Technologies, London, ON, CA) in which the displacement of some control regions was known. Good correlation has been demonstrated between the estimated displacement function from the algorithms and the phantom setup. Due to the limited temporal resolution, the acceleration signals are sparse and highly noisy. The study suggests a non-invasive technique to measure the cardiac acceleration that may be used to improve the monitoring of cardiac mechanics and optimization of CRT.

  13. Crystal structure of DnaT84–153-dT10 ssDNA complex reveals a novel single-stranded DNA binding mode

    PubMed Central

    Liu, Zheng; Chen, Peng; Wang, Xuejuan; Cai, Gang; Niu, Liwen; Teng, Maikun; Li, Xu

    2014-01-01

    DnaT is a primosomal protein that is required for the stalled replication fork restart in Escherichia coli. As an adapter, DnaT mediates the PriA-PriB-ssDNA ternary complex and the DnaB/C complex. However, the fundamental function of DnaT during PriA-dependent primosome assembly is still a black box. Here, we report the 2.83 Å DnaT84–153-dT10 ssDNA complex structure, which reveals a novel three-helix bundle single-stranded DNA binding mode. Based on binding assays and negative-staining electron microscopy results, we found that DnaT can bind to phiX 174 ssDNA to form nucleoprotein filaments for the first time, which indicates that DnaT might function as a scaffold protein during the PriA-dependent primosome assembly. In combination with biochemical analysis, we propose a cooperative mechanism for the binding of DnaT to ssDNA and a possible model for the assembly of PriA-PriB-ssDNA-DnaT complex that sheds light on the function of DnaT during the primosome assembly and stalled replication fork restart. This report presents the first structure of the DnaT C-terminal complex with ssDNA and a novel model that explains the interactions between the three-helix bundle and ssDNA. PMID:25053836

  14. Monte Carlo simulation of prompt γ-ray spectra from depleted uranium under D-T neutron irradiation and electron recoil spectra in a liquid scintillator detector

    NASA Astrophysics Data System (ADS)

    Jian-Guo, Qin; Cai-Feng, Lai; Rong, Liu; Tong-Hua, Zhu; Xin-Wei, Zhang; Bang-Jiao, Ye

    2016-03-01

    To overcome the problem of inefficient computing time and unreliable results in MCNP5 calculation, a two-step method is adopted to calculate the energy deposition of prompt γ-rays in detectors for depleted uranium spherical shells under D-T neutron irradiation. In the first step, the γ-ray spectrum for energy below 7 MeV is calculated by MCNP5 code; secondly, the electron recoil spectrum in a BC501A liquid scintillator detector is simulated based on EGSnrc Monte Carlo Code with the γ-ray spectrum from the first step as input. The comparison of calculated results with experimental ones shows that the simulations agree well with experiment in the energy region 0.4-3 MeV for the prompt γ-ray spectrum and below 4 MeVee for the electron recoil spectrum. The reliability of the two-step method in this work is validated. Supported by the National Natural Science Foundation of China (91226104) and National Special Magnetic Confinement Fusion Energy Research, China (2015GB108001)

  15. Deciphering cryptic P-T-d-t histories in the western Thor-Odin dome, Monashee Mountains, Canadian Cordillera: A key to unravelling pre-Cordilleran tectonic signatures

    NASA Astrophysics Data System (ADS)

    Spalla, M. Iole; Zanoni, Davide; Williams, Paul F.; Gosso, Guido

    A detailed structural and metamorphic study along a transect from the core of the Thor-Odin dome to its western margin (South-eastern Canadian Cordillera) has allowed the reconstruction of the P-T-d-t history estimating PT changes, during successive fabric development. The dome comprises a recumbently-folded and transposed Proterozoic high-grade basement and Late Proterozoic-Palaeozoic metasedimentary cover, characterised by a regional foliation (S T). An inferred, nearly-isothermal decompressional path, from a maximum depth of ca. 40 km, transgresses the "maximum relaxed geotherm", consistent with exhumation during lithospheric extension. Contrasting pre-S T PT conditions indicate that different units followed different PT paths before S T development. Traces of these early and variable structural and metamorphic re-equilibration steps are preserved in meter-scale boudins and granular-scale domains poorly affected by transposition. The various paths represent events, from Palaeoproterozoic to Proterozoic Rodinia break up, to Jurassic-Cretaceous convergence and final exhumation in the Eocene. Much of the deformational and metamorphic history may have been accumulated before onset of S T. However, the early structural history is overprinted, and mineral assemblages and their relative ages are mostly obscured by S T development. A glimpse of the earlier geologic history is possible only by combining micro-structural analysis and PT estimates.

  16. Research and development of a dedicated collimator for 14.2 MeV fast neutrons for imaging using a D-T generator

    NASA Astrophysics Data System (ADS)

    Sabo-Napadensky, I.; Weiss-Babai, R.; Gayer, A.; Vartsky, D.; Bar, D.; Mor, I.; Chacham-Zada, R.; Cohen, M.; Tamim, N.

    2012-06-01

    One of the main problems in neutron imaging is the scattered radiation that accompanies the direct neutrons that reach the imaging detectors and affect the image quality. We have developed a dedicated collimator for 14.2 MeV fast neutrons. The collimator optimizes the amount of scattered radiation to primary neutrons that arrive at the imaging plane. We have used different materials within the collimator in order to lower the scattered radiation that arrives at the scanned object. The image quality and the signal to noise ratios that are measured show that a mixture of BORAX (Na2B4O7ṡ10H2O) and water in the experimental beam collimator give the best results. We have used GEANT4 to simulate the collimator performance, the simulations predict the optimized material looking on the ratios of the scattered to primary neutrons that contribute in the detector. We present our experimental setup, report the results of the experimental and related simulation studies with neutrons beam generated by a 14.2 MeV D-T neutron generator.

  17. Locations and contexts of sequences that hybridize to poly(dG-dT).(dC-dA) in mammalian ribosomal DNAs and two X-linked genes.

    PubMed Central

    Braaten, D C; Thomas, J R; Little, R D; Dickson, K R; Goldberg, I; Schlessinger, D; Ciccodicola, A; D'Urso, M

    1988-01-01

    Sequences located several kilobases both 5' and 3' of the stably transcribed portion of several genes hybridize to radio-labeled pure fragments of the alternating sequence poly (dG-dT) (dC-dA) ["poly(GT)"]. The genes include the ribosomal DNA of mouse, rat, and human, and also human glucose-6-phosphate dehydrogenase (G6PD) and mouse hypoxanthine-guanine phosphoribosyl transferase (HPRT). HPRT has additional hybridizing sequences in introns. Fragments that include the hybridizing sequences and up to 300 bp of adjoining DNA show perfect runs of poly(GT) (greater than 30bp) in all but the human 5' region of rDNA, which shows a somewhat different alternating purine:pyrimidine sequence, poly(GTAT) (36bp). Within 150 bp of these sequences in various instances are found a number of other sequences reported to affect DNA conformation in model systems. Most marked is an enhancement of sequences matching at least 67% to the consensus binding sequence for topoisomerase II. Two to ten-fold less of such sequences were found in other sequenced portions of the nontranscribed spacer or in the transcribed portion of rDNA. The conservation of the locations of tracts of alternating purine:pyrimidine between evolutionarily diverse species is consistent with a possible functional role for these sequences. Images PMID:3267216

  18. Semiclassical and quasiclassical calculation of reaction probabilities for collinear X F2→XF F (X = Mu, H, D, T)

    NASA Astrophysics Data System (ADS)

    Connor, J. N. L.; Edge, C. J.; Laganà, A.

    Semiclassical calculations of reaction probabilities have been carried out for the collinear H + F2 (n = 0, 1) reaction using the best extended LEPS surface No. II of Jonathan et al. Both real and complex valued classical trajectories have been included in the calculations for an energy range where the quasiclassical total reaction probability is unity. Comparison with quantum results shows the semiclassical reaction probabilities are accurate to about ± 0·05 provided only two real or complex stationary phase points make an important contribution to the S matrix element, so that the uniform Airy or integer Bessel approximations are valid. Real semiclassical calculations are also reported for the collinear Mu, D, T + F2 (n = 0) reactions. For the D and T reactions, the semiclassical reaction probabilities are estimated to be accurate to ± 0·05, except close to the reaction threshold, but for the Mu reaction the estimated errors are much larger. In addition, quasiclassical calculations for the reaction probabilities have been carried out using half integer boxing and smooth sampling methods to quantize the product distributions. For the H + F2 reaction, there are usually systematic deviations from the quantum reaction probabilities and the same is expected to be true for the Mu, D and T reactions.

  19. Investigation of X-ray spectral response of D-T fusion produced neutron irradiated PIPS detectors for plasma X-ray diagnostics

    NASA Astrophysics Data System (ADS)

    Vigneshwara Raja, P.; Narasimha Murty, N. V. L.; Rao, C. V. S.; Abhangi, Mitul

    2015-10-01

    This paper describes the fusion-produced neutron irradiation induced changes in the X-ray spectral response of commercially available Passivated Implanted Planar Silicon (PIPS) detectors using the accelerator based D-T generator. After 14.1 MeV neutron irradiation up to a fluence of 3.6× 1010 n/cm2, the energy resolution (i.e. FWHM) of the detectors at room temperature is found to degrade by about 3.8 times that of the pre-irradiated value. From the X-ray spectral characteristics, it has been observed that the room temperature spectral response of PIPS detectors is too poor even at low neutron fluences. Irradiation is also carried out with Am-Be neutron source for studying the effect of scattered neutrons from the reactor walls on the detector performance. Comparative studies of the damage caused by 14.1 MeV neutrons and Am-Be source produced neutrons at the same neutron fluence are carried out by analyzing the irradiated detector characteristics. The degradation in the energy resolution of the detectors is attributed to the radiation induced changes in the detector leakage current. No considerable changes in the full depletion voltage and the effective doping concentration up to the neutron fluence of 3.6× 1010 n/cm2, are observed from the measured C-V characteristics. Partial recovery of the neutron irradiated detector characteristics is discussed.

  20. Structure of zirconium-93 and zirconium-91 as shown by the reactions Zr-92(d,p)Zr-93 and Zr-92(d,t)Zr-91

    NASA Technical Reports Server (NTRS)

    Baron, N.; Leonard, R. F.; Stewart, W. M.; Fink, C. L.; Christensen, P. R.; Nickles, J.; Thorsteinsen, T. F.

    1972-01-01

    Deuterons of 13-MeV incident energy were scattered from Zr-92(d,p)Zr-93. The Zr-92(d,p)Zr-93 data analysis resulted in the location of 47 levels up to an excitation energy of 4.84 MeV, and the spins of 43 of these levels were identified. Essentially all the strength of the 2d5/2, 3s1/2, 2d3/2, and 1g7/2 shells was observed; and the excitation energy of their centroids was computed to be 0.00, 1.21, 2.23, and 2.37 MeV, respectively. Also, 43 percent of the 1h11/2 strength, 21 percent of the 2f7/2 strength, and 3 percent of the 3p3/2 strength were observed. In addition, the Zr-92(d,t)Zr-91 data analysis resulted in the location of 26 levels up to an excitation energy of 4.01 MeV, and the spins of 21 of these levels were identified. Most of the expected strength of the 2d5/2 and 1g9/2 shells was obtained, and the excitation energy of their centroids was computed to be 0.31 and 3.19 MeV, respectively. In addition, six l=1 states are populated belonging to either the 2p1/2 or 2p3/2 shells.

  1. Use of D-T-produced fast neutrons for in vivo body composition analysis: a reference method for nutritional assessment in the elderly.

    PubMed

    Kehayias, J J

    2004-05-01

    Body composition has become the main outcome of many nutritional intervention studies including osteoporosis, malnutrition, obesity, AIDS, and aging. Traditional indirect body composition methods developed with healthy young adults do not apply to the elderly or diseased. Fast neutron activation (for N and P) and neutron inelastic scattering (for C and O) are used to assess in vivo elements characteristic of specific body compartments. Non-bone phosphorus for muscle is measured by the (31)P(n, alpha)(28)Al reaction, and nitrogen for protein via the (14)N(n,2n)(13)N fast neutron reaction. Inelastic neutron scattering is used to measure total body carbon and oxygen. Body fat is derived from carbon after correcting for contributions from protein, bone, and glycogen. Carbon-to-oxygen ratio (C/O) is used to measure the distribution of fat and lean tissue in the body and to monitor small changes of lean mass. A sealed, D-T neutron generator is used for the production of fast neutrons. Carbon and oxygen mass and their ratio are measured in vivo at a radiation exposure of less than 0.06 mSv. Gamma-ray spectra are collected using large BGO detectors and analyzed for the 4.43 MeV state of carbon and 6.13 MeV state of oxygen, simultaneously with the irradiation. P and N analysis by delayed fast neutron activation is performed by transferring the patient to a shielded room equipped with an array of NaI(Tl) detectors. A combination of measurements makes possible the assessment of the "quality" of fat-free mass. The neutron generator system is used to evaluate the efficacy of new treatments, to study mechanisms of lean tissue depletion with aging, and to investigate methods for preserving function and quality of life in the elderly. It is also used as a reference method for the validation of portable instruments of nutritional assessment. PMID:14747891

  2. The fold-and-thrust tectonic setting of the Mesozoic carbonate units of Eastern Sardinia: insights from 3D (2D + t) modelling

    NASA Astrophysics Data System (ADS)

    Arragoni, Simone; Cianfarra, Paola; Maggi, Matteo; Salvini, Francesco

    2015-04-01

    Present-day Eastern Sardinia structural setting was mainly determined by Cenozoic strike-slip-to-oblique faulting in the Tacchi and Golfo di Orosei regions, where Mesozoic shallow water carbonates crop out (Costamagna and Barca, 2004 and references therein). These structures are interpreted as the effects of the rotation of the Sardinia-Corsica block during Oligocene and the successive opening of the Tyrrhenian sea starting from lower Miocene (Oggiano et al., 2009 and references therein). New structural data indicate the presence of dip-slip compressive tectonics and thrusting affecting the Mesozoic carbonates and involving the underlying Paleozoic basement. This event shows a westward vergence (top-to-the-W) and is cut by later strike-slip faults. The age of this tectonics is constrained between Eocene (Lutetian rocks involved) and Oligo-Miocene (post-dated by the strike-slip tectonic event). The integration between these new structural observations and the available geological and geophysical datasets allowed to construct a balanced and admissible geological cross section in order to study the tectonic evolution of eastern Sardinia before the opening of the Tyrrhenian basin. The orientation of the section is parallel to the direction of the tectonic transport, that is WSW-ENE. The balanced cross-section has been modelled with the "Forctre" software in order to get a 3D (2D + t) evolutionary model and check its admissibility through time. The final section shows a thin-skin geometry (flats sectors prevailing over ramps) and is composed of two main tectonic slices deeply involving the Paleozoic basement and secondary thrusting affecting the Mesozoic carbonate units. These are characterized by "younger-on-older" flat-over-flat tectonics evidenced by Cretaceous-over-Jurassic thrusting. Similar geometries have been described also in the Latium-Abruzzi sector of the Southern Apennines. Costamagna L.G. & Barca S. 2004. Stratigrafia, analisi di facies, paleogeografia ed

  3. Thick target D-T neutron yield measurements using metal occluders of scandium, titanium, yttrium, zirconium, gadolinium, erbium, hafnium, and tantalum at energies from 25 to 200 keV

    SciTech Connect

    Malbrough, D.J.; Molloy, J.T. Jr.; Becker, R.H.

    1990-11-19

    Deuterium-Tritium (D-T) neutron yields from thick films of scandium, titanium, yttrium, zirconium, gadolinium, erbium, hafnium, and tantalum were measured by the associated particle technique using the 200-keV accelerator at the Pinellas Plant. The neutron yields were measured for all targets at energies from 25 to 200 keV in 5-keV steps with an average uncertainty of {plus_minus}6.8%. Tabulated results are presented with yield versus energy curves for each target. Yield curves for D-D neutrons from earlier measurements are also presented with the D-T neutron yield curves. Good fits to the data were found for both D-D and D-T with theoretical calculations that were adjusted by smooth functions of the form: A{sub 0} + A{sub 1}E + A{sub 2}E{sup 2}. The results of the fits strongly suggest that disagreement between measurement and theory is due mainly to inaccuracies in currently available stopping power data. Comparisons with earlier theoretical calculations for titanium and erbium are also presented. 27 refs., 10 figs., 4 tabs.

  4. Fast and robust 3D T1 mapping using spiral encoding and steady RF excitation at 7 T: application to cardiac manganese enhanced MRI (MEMRI) in mice.

    PubMed

    Castets, Charles R; Ribot, Emeline J; Lefrançois, William; Trotier, Aurélien J; Thiaudière, Eric; Franconi, Jean-Michel; Miraux, Sylvain

    2015-07-01

    Mapping longitudinal relaxation times in 3D is a promising quantitative and non-invasive imaging tool to assess cardiac remodeling. Few methods are proposed in the literature allowing us to perform 3D T1 mapping. These methods often require long scan times and use a low number of 3D images to calculate T1 . In this project, a fast 3D T1 mapping method using a stack-of-spirals sampling scheme and regular RF pulse excitation at 7 T is presented. This sequence, combined with a newly developed fitting procedure, allowed us to quantify T1 of the whole mouse heart with a high spatial resolution of 208 × 208 × 315 µm(3) in 10-12 min acquisition time. The sensitivity of this method for measuring T1 variations was demonstrated on mouse hearts after several injections of manganese chloride (doses from 25 to 150 µmol kg(-1) ). T1 values were measured in vivo in both pre- and post-contrast experiments. This protocol was also validated on ischemic mice to demonstrate its efficiency to visualize tissue damage induced by a myocardial infarction. This study showed that combining spiral gradient shape and steady RF excitation enabled fast and robust 3D T1 mapping of the entire heart with a high spatial resolution. PMID:25989986

  5. Ground and excited state interactions of metalloporphyrin PtTMPyP4 with polynucleotides [poly(dG-dC)]2 and [poly(dA-dT)]2.

    PubMed

    Keane, Páraic M; Kelly, John M

    2016-08-01

    The ground- and excited-state interactions of Pt(ii) meso-tetrakis(4-N-methylpyridyl)porphyrin (PtTMPyP4) with polynucleotides [poly(dG-dC)]2 and [poly(dA-dT)]2 have been investigated using UV/visible, circular dichroism, and steady-state and time-resolved emission spectroscopy. PtTMPyP4 intercalates into [poly(dG-dC)]2 with K∼ 10(6) M(-1). When bound to [poly(dG-dC)]2 in aerated solution there is a six-fold emission enhancement with 18 nm red-shift in emission maximum. Emission lifetimes are biexponential. In the presence of [poly(dA-dT)]2 at least two distinct groove-binding modes are observed, depending on the binding ratio. In [poly(dA-dT)]2 the emission intensity increases by a maximum factor of 17 with no shift in the emission spectrum. Three exponentials were required for lifetime fitting. The lower extent of emission enhancement in the presence of [poly(dG-dC)]2 suggests that a slow electron transfer may take place to guanine, which is significantly less efficient than that previously observed for PtTMPyP4 in the presence of guanosine 5'-monophosphate (GMP). The results are compared to those previously recorded with free base H2TMPyP4. PMID:27377608

  6. Ground Operations

    NASA Technical Reports Server (NTRS)

    Eastman, Randy

    2000-01-01

    The contents include: 1) Integrated Space Transportation; 2) Fourth Generation Reusable Launch Vehicle (RLV) Research; 3) Ground Operations; 4) Ground Operations Technologies; 5) Sensors; and 6) Umbilicals. This paper is presented in viewgraph form.

  7. Schwartz operators

    NASA Astrophysics Data System (ADS)

    Keyl, M.; Kiukas, J.; Werner, R. F.

    2016-05-01

    In this paper, we introduce Schwartz operators as a non-commutative analog of Schwartz functions and provide a detailed discussion of their properties. We equip them, in particular, with a number of different (but equivalent) families of seminorms which turns the space of Schwartz operators into a Fréchet space. The study of the topological dual leads to non-commutative tempered distributions which are discussed in detail as well. We show, in particular, that the latter can be identified with a certain class of quadratic forms, therefore making operations like products with bounded (and also some unbounded) operators and quantum harmonic analysis available to objects which are otherwise too singular for being a Hilbert space operator. Finally, we show how the new methods can be applied by studying operator moment problems and convergence properties of fluctuation operators.

  8. A generalization of the concept of sectorial operator

    NASA Astrophysics Data System (ADS)

    Gorodnii, M. F.; Chaikovskii, A. V.

    2006-08-01

    Let B be a Banach space and G\\colon[0,+\\infty)\\to(0,+\\infty) a non-increasing function such that G(t)\\to0 as t\\to\\infty and 1/G is a Lipschitz function on [0,+\\infty).A linear operator T\\colon D(T)\\subset B\\to B is said to be G-sectorial if there exist constants a\\in\\mathbb R and \\varphi\\in(0,\\pi/2) such that the spectrum of T lies in the set \\displaystyle S_{a,\\varphi}:=\\{z\\in\\mathbb C\\mid z\

  9. Operational efficiency

    NASA Technical Reports Server (NTRS)

    Bland, Dan; Davis, Tom; Griffin, Sandy

    1990-01-01

    Space transportation avionics technology operational efficiency issues are presented in viewgraph form. Information is given on ascent flight design, autonomous spacecraft control, operations management systems, advanced mission control, telerobotics/telepresence, advanced software integration, advanced test/checkout systems, advanced training systems, and systems monitoring.

  10. Warehousing Operations.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on warehousing operations is designed to provide instruction in the procedures used in warehousing operations. Introductory materials include specific information for MCI students and a study guide (guidelines to complete the course). The 22-hour…

  11. Operational Amplifiers.

    ERIC Educational Resources Information Center

    Foxcroft, G. E.

    1986-01-01

    Addresses the introduction of low cost equipment into high school and college physical science classes. Examines the properties of an "ideal" operational amplifier and discusses how it might be used under saturated and non-saturated conditions. Notes the action of a "real" operational amplifier. (TW)

  12. Business & Operations

    ERIC Educational Resources Information Center

    Agron, Joe

    2007-01-01

    This article presents an interview with John D. Musso, executive director of the Association of School Business Officials (ASBO) International. Musso talks about trends and issues that will most affect school business and operations in 2007 and beyond. Despite the challenges facing school operations, he believes that the key to being successful at…

  13. Operant Conditioning

    PubMed Central

    Staddon, J. E. R.; Cerutti, D. T.

    2005-01-01

    Operant behavior is behavior “controlled” by its consequences. In practice, operant conditioning is the study of reversible behavior maintained by reinforcement schedules. We review empirical studies and theoretical approaches to two large classes of operant behavior: interval timing and choice. We discuss cognitive versus behavioral approaches to timing, the “gap” experiment and its implications, proportional timing and Weber's law, temporal dynamics and linear waiting, and the problem of simple chain-interval schedules. We review the long history of research on operant choice: the matching law, its extensions and problems, concurrent chain schedules, and self-control. We point out how linear waiting may be involved in timing, choice, and reinforcement schedules generally. There are prospects for a unified approach to all these areas. PMID:12415075

  14. Applied Operations Research: Operator's Assistant

    NASA Technical Reports Server (NTRS)

    Cole, Stuart K.

    2015-01-01

    NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

  15. Operation Galileo

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Operation Galileo education program took off with the first of four flights on board a U.S. Air Force C-130 transport aircraft from Keesler Air Force Base, Miss. Teachers from Mississippi and Louisiana participated in the program which aims to enhance math and science education of high-risk students by allowing junior high and middle school teachers, students and parents to fly in cargo and tanker aircraft during routine training missions. The Air Force Reserve created Operation Galileo, which was implemented by NASA's Educator Resource Center at Stennis.

  16. Operating Efficiently

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2010-01-01

    The ailing economy has spared few schools and universities. Faced with funding cutbacks, most education administrators have had to make difficult choices about where to allocate dwindling resources. Even in the best of financial times, educating students is the first priority. When money is tight, school maintenance and operations (M&O) programs…

  17. Operation Cooperation.

    ERIC Educational Resources Information Center

    Hohl, K. Robert

    The needs of teachers for high-demand and seasonal films have been met by a cooperative effort of the Berks County Educational Television Committee, local school districts, the Berks and Suburban TV cable companies and the Berks County Intermediate Unit in a project called Operation Cooperation. Regionalization of the instructional media services…

  18. Establishing operations

    PubMed Central

    Michael, Jack

    1993-01-01

    The first two books on behavior analysis (Skinner, 1938; Keller & Schoenfeld, 1950) had chapter-length coverage of motivation. The next generation of texts also had chapters on the topic, but by the late 1960s it was no longer being given much treatment in the behavior-analytic literature. The present failure to deal with the topic leaves a gap in our understanding of operant functional relations. A partial solution is to reintroduce the concept of the establishing operation, defined as an environmental event, operation, or stimulus condition that affects an organism by momentarily altering (a) the reinforcing effectiveness of other events and (b) the frequency of occurrence of that part of the organism's repertoire relevant to those events as consequences. Discriminative and motivative variables can be distinguished as follows: The former are related to the differential availability of an effective form of reinforcement given a particular type of behavior; the latter are related to the differential reinforcing effectiveness of environmental events. An important distinction can also be made between unconditioned establishing operations (UEOs), such as food deprivation and painful stimulation, and conditioned establishing operations (CEOs) that depend on the learning history of the organism. One type of CEO is a stimulus that has simply been paired with a UEO and as a result may take on some of the motivative properties of that UEO. The warning stimulus in avoidance procedures is another important type of CEO referred to as reflexive because it establishes its own termination as a form of reinforcement and evokes the behavior that has accomplished such termination. Another CEO is closely related to the concept of conditional conditioned reinforcement and is referred to as a transitive CEO, because it establishes some other stimulus as a form of effective reinforcement and evokes the behavior that has produced that other stimulus. The multiple control of human

  19. Operation Poorman

    SciTech Connect

    Pruvost, N.; Tsitouras, J.

    1981-03-18

    The objectives of Operation Poorman were to design and build a portable seismic system and to set up and use this system in a cold-weather environment. The equipment design uses current technology to achieve a low-power, lightweight system that is configured into three modules. The system was deployed in Alaska during wintertime, and the results provide a basis for specifying a mission-ready seismic verification system.

  20. Operations automation

    NASA Technical Reports Server (NTRS)

    Boreham, Charles Thomas

    1994-01-01

    This is truly the era of 'faster-better-cheaper' at the National Aeronautics and Space Administration/Jet Propulsion Laboratory (NASA/JPL). To continue JPL's primary mission of building and operating interplanetary spacecraft, all possible avenues are being explored in the search for better value for each dollar spent. A significant cost factor in any mission is the amount of manpower required to receive, decode, decommutate, and distribute spacecraft engineering and experiment data. The replacement of the many mission-unique data systems with the single Advanced Multimission Operations System (AMMOS) has already allowed for some manpower reduction. Now, we find that further economies are made possible by drastically reducing the number of human interventions required to perform the setup, data saving, station handover, processed data loading, and tear down activities that are associated with each spacecraft tracking pass. We have recently adapted three public domain tools to the AMMOS system which allow common elements to be scheduled and initialized without the normal human intervention. This is accomplished with a stored weekly event schedule. The manual entries and specialized scripts which had to be provided just prior to and during a pass are now triggered by the schedule to perform the functions unique to the upcoming pass. This combination of public domain software and the AMMOS system has been run in parallel with the flight operation in an online testing phase for six months. With this methodology, a savings of 11 man-years per year is projected with no increase in data loss or project risk. There are even greater savings to be gained as we learn other uses for this configuration.

  1. Operating internationally

    SciTech Connect

    Seeley, R.S.

    1994-02-01

    When Enron Power Corp. took over a 28 MW power facility at the former US Naval base in Subic Bay, the Philippines, the company was required to employ 139 people to run the plant. This large labor force was necessary not because of the plant's operational needs, but because of local labor practices and unemployment pressures. Independent power companies have become all too familiar with the high cost and complexity of developing projects in emerging international markets. Some of the most significant issues involve taxation, unfamiliar legal systems, changing regulations, and foreign investment restrictions. In addition, questions about currency exchange, national credit worthiness, and political stability add to the difficulty of international development. However, one of the most daunting challenges centers not on development, but on long-term operations and maintenance (O M). A key concern is finding qualified labor. Most developers and O M companies agree that local people should run the plant, with the top person, or persons, thoroughly trained in the developer's company philosophy.

  2. From intra-oceanic subduction to arc accretion and oblique arc-continent collision: Insights from the P-T-D-t path of the southern Río San Juan metamorphic complex, northern Dominican Republic

    NASA Astrophysics Data System (ADS)

    Escuder-Viruete, J.; Valverde-Vaquero, P.; Rojas-Agramonte, Y.; Gabites, J.; Pérez-Estaún, A.

    2012-04-01

    +zoisite-bearing felsic melts exhibit a positive Ce anomaly relative to chondrite, an overall flat HREE pattern, and no significant negative Eu anomaly, which provide evidence for zircon growth under eclogite facies conditions. Structural and sedimentary data confirm the existence of a regional, Late Oligocene to Miocene contractional event in the complex (D3), as well as two additional late brittle deformations (D4 and D5). The compilation of this pressure-temperature-deformation-time path supports that an early subduction-related D1 deformation and high-P M1 metamorphism, was followed by a D2 extensional shearing deformation and M2 retrograde decompression, at exhumation rates of 3-4 km/Ma. The dominant tectonic mechanism responsible for exhumation of high-P rocks in the Cuaba Unit was therefore the D2 extensional tectonics, which caused tectonic juxtaposition and local metamorphic pressure gaps within the structural pile. This P-T-D-t evolution indicates that the Cuaba Unit experienced initial subduction, subsequent underplating below the forearc wedge of an island-arc, and final exhumation in the accretionary prism. At the regional scale, the Cuaba unit could be a fragment of the proto-Pacific arc that collided and was accreted bellow the E-facing, intra-oceanic, Caribbean island-arc, prior to final oblique collision with the paleo-continental margin of North America.

  3. On a Riesz basis of exponentials related to the eigenvalues of an analytic operator and application to a non-selfadjoint problem deduced from a perturbation method for sound radiation

    SciTech Connect

    Ellouz, Hanen; Feki, Ines; Jeribi, Aref

    2013-11-15

    In the present paper, we prove that the family of exponentials associated to the eigenvalues of the perturbed operator T(ε) ≔ T{sub 0} + εT{sub 1} + ε{sup 2}T{sub 2} + … + ε{sup k}T{sub k} + … forms a Riesz basis in L{sup 2}(0, T), T > 0, where ε∈C, T{sub 0} is a closed densely defined linear operator on a separable Hilbert space H with domain D(T{sub 0}) having isolated eigenvalues with multiplicity one, while T{sub 1}, T{sub 2}, … are linear operators on H having the same domain D⊃D(T{sub 0}) and satisfying a specific growing inequality. After that, we generalize this result using a H-Lipschitz function. As application, we consider a non-selfadjoint problem deduced from a perturbation method for sound radiation.

  4. Risk mitigation for ITER by a prolonged and joint international operation of JET

    NASA Astrophysics Data System (ADS)

    Donne, Antonius J.; Cowley, Steve; Jones, Timothy; Litaudon, Xavier; JET Team; CCFE Team

    2015-11-01

    Prolonged operation of the Joint European Torus (JET) in a set-up involving all ITER partners will be beneficial for ITER. Experiments at JET with its ITER-like wall and using a D-T plasma mixture will help to mitigate risks in the ITER research plan. Training of the ITER operators, technicians and engineers at JET will save valuable time when ITER comes into operation. Moreover, the way in which the future ITER experiments will be organized can already be experienced at JET, by imposing a similar organisational structure. This paper will present arguments in favour of an extension of JET and additionally briefly discuss a number of enhancements that will make experiments on JET even more relevant for ITER.

  5. STS upper stage operations

    NASA Technical Reports Server (NTRS)

    Kitchens, M. D.; Schnyer, A. D.

    1977-01-01

    Several design/development and operational approaches for STS upper stages are being pursued to realize maximum operational and economic benefits upon the introduction of the STS in the 1980s. The paper focuses special attention on safety operations, launch site operations and on-orbit operations.

  6. Operator pencil passing through a given operator

    NASA Astrophysics Data System (ADS)

    Biggs, A.; Khudaverdian, H. M.

    2013-12-01

    Let Δ be a linear differential operator acting on the space of densities of a given weight λ0 on a manifold M. One can consider a pencil of operators {widehat{Pi }}(Δ )=lbrace Δ _{λ }rbrace passing through the operator Δ such that any Δλ is a linear differential operator acting on densities of weight λ. This pencil can be identified with a linear differential operator widehat{Δ } acting on the algebra of densities of all weights. The existence of an invariant scalar product in the algebra of densities implies a natural decomposition of operators, i.e., pencils of self-adjoint and anti-self-adjoint operators. We study lifting maps that are on one hand equivariant with respect to divergenceless vector fields, and, on the other hand, with values in self-adjoint or anti-self-adjoint operators. In particular, we analyze the relation between these two concepts, and apply it to the study of diff (M)-equivariant liftings. Finally, we briefly consider the case of liftings equivariant with respect to the algebra of projective transformations and describe all regular self-adjoint and anti-self-adjoint liftings. Our constructions can be considered as a generalisation of equivariant quantisation.

  7. Operator pencil passing through a given operator

    SciTech Connect

    Biggs, A. E-mail: adam.biggs@student.manchester.ac.uk; Khudaverdian, H. M. E-mail: adam.biggs@student.manchester.ac.uk

    2013-12-15

    Let Δ be a linear differential operator acting on the space of densities of a given weight λ{sub 0} on a manifold M. One can consider a pencil of operators Π-circumflex(Δ)=(Δ{sub λ}) passing through the operator Δ such that any Δ{sub λ} is a linear differential operator acting on densities of weight λ. This pencil can be identified with a linear differential operator Δ-circumflex acting on the algebra of densities of all weights. The existence of an invariant scalar product in the algebra of densities implies a natural decomposition of operators, i.e., pencils of self-adjoint and anti-self-adjoint operators. We study lifting maps that are on one hand equivariant with respect to divergenceless vector fields, and, on the other hand, with values in self-adjoint or anti-self-adjoint operators. In particular, we analyze the relation between these two concepts, and apply it to the study of diff (M)-equivariant liftings. Finally, we briefly consider the case of liftings equivariant with respect to the algebra of projective transformations and describe all regular self-adjoint and anti-self-adjoint liftings. Our constructions can be considered as a generalisation of equivariant quantisation.

  8. Biomedical programs operations plans

    NASA Technical Reports Server (NTRS)

    Walbrecher, H. F.

    1974-01-01

    Operational guidelines for the space shuttle life sciences payloads are presented. An operational assessment of the medical experimental altitude test for Skylab, and Skylab life sciences documentation are discussed along with the operations posture and collection of space shuttle operational planning data.

  9. Ares I Operability Overview

    NASA Technical Reports Server (NTRS)

    Shaughnessy, Raymond W.

    2009-01-01

    A general overview of Ares I Operability is presented. The contents include: 1) Vehicle and Ops Concept Overviews; 2) What does operability mean to the Ares I Project?; 3) What is the Ares Project doing to influence operability into the flight hardware designs?; and 4) How do we measure Ares I Project success in infusing operability?

  10. A multi-year field olfactometry study near a concentrated animal feeding operation.

    PubMed

    Dalton, Pamela; Caraway, Edward A; Gibb, Herman; Fulcher, Keri

    2011-12-01

    This study developed and tested a protocol for monitoring odors near a Concentrated Animal Feeding Operation (CAFO). The Nasal Ranger, a portable field olfactometry instrument, was used by a panel of trained individuals to conduct the monitoring near a swine CAFO. Monitors were selected based on olfactory sensitivity, scheduling availability, and lack of association with the CAFO or residential neighbors of the CAFO. Monitors were trained to use the Nasal Ranger, collect and record weather data, and characterize any odors detected. Data were collected over a 3-year period (2007-2009) for approximately 9 months each year. The data recorded included odor intensity, a description of the odor, date and time of the reading, and weather conditions. Of more than 50,000 readings, forty-one (0.1%) odor readings had a dilution to threshold ratio (D/T) of +/- 7:1 and were attributed to hog manure. The frequency of odor readings attributed to hog manure with D/T +/-7:1 was found to negatively correlate with log wind speed and positively correlate with wind from the direction of the farm. Other meteorological variables (temperature, precipitation, cloud cover) and time of day did not influence the frequency. PMID:22263428

  11. Computer algebra and operators

    NASA Technical Reports Server (NTRS)

    Fateman, Richard; Grossman, Robert

    1989-01-01

    The symbolic computation of operator expansions is discussed. Some of the capabilities that prove useful when performing computer algebra computations involving operators are considered. These capabilities may be broadly divided into three areas: the algebraic manipulation of expressions from the algebra generated by operators; the algebraic manipulation of the actions of the operators upon other mathematical objects; and the development of appropriate normal forms and simplification algorithms for operators and their actions. Brief descriptions are given of the computer algebra computations that arise when working with various operators and their actions.

  12. Space Station operations

    NASA Technical Reports Server (NTRS)

    Gray, R. H.

    1985-01-01

    An evaluation of the success of the Space Station will be based on the service provided to the customers by the Station crew, the productivity of the crew, and the costs of operation. Attention is given to details regarding Space Station operations, a summary of operational philosophies and requirements, logistics and resupply operations, prelaunch processing and launch operations, on-orbit operations, aspects of maintainability and maintenance, habitability, and questions of medical care. A logistics module concept is considered along with a logistics module processing timeline, a habitability module concept, and a Space Station rescue mission.

  13. Training and Tactical Operationally Responsive Space Operations

    NASA Astrophysics Data System (ADS)

    Sorensen, B.; Strunce, R., Jr.

    Current space assets managed by traditional space system control resources provide communication, navigation, intelligence, surveillance, and reconnaissance (ISR) capabilities using satellites that are designed for long life and high reliability. The next generation Operationally Responsive Space (ORS) systems are aimed at providing operational space capabilities which will provide flexibility and responsiveness to the tactical battlefield commander. These capabilities do not exist today. The ORS communication, navigation, and ISR satellites are being designed to replace or supplement existing systems in order to enhance the current space force. These systems are expected to rapidly meet near term space needs of the tactical forces. The ORS concept includes new tactical satellites specifically designed to support contingency operations such as increased communication bandwidth and ISR imagery over the theater for a limited period to support air, ground, and naval force mission. The Concept of Operations (CONOPS) that exists today specifies that in addition to operational control of the satellite, the tasking and scheduling of the ORS tactical satellite for mission data collection in support of the tactical warfighter will be accomplished within the Virtual Mission Operations Center (VMOC). This is very similar to what is currently being accomplished in a fixed Mission Operations Center on existing traditional ISR satellites. The VMOC is merely a distributed environment and the CONOPS remain virtually the same. As a result, there is a significant drawback to the current ORS CONOPS that does not account for the full potential of the ORS paradigm for supporting tactical forces. Although the CONOPS approach may be appropriate for experimental Tactical Satellites (TacSat), it ignores the issues associated with the In-Theater Commander's need to own and operate his dedicated TacSat for most effective warfighting as well as the Warfighter specific CONOPS. What is needed

  14. Major operations and activities

    SciTech Connect

    Black, D.G.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the major operations and activities on the site. These operations and activities include site management, waste management, environmental restoration and corrective actions, and research and technology development.

  15. Launch operations efficiency

    NASA Technical Reports Server (NTRS)

    Diloreto, Clem; Fischer, Carl; Atkins, Bob

    1988-01-01

    The paper discusses launch operations from a program perspective. Launch operations cost is a significant part of program cost. New approaches to launch operations, integrated with lessons learned, have the potential to increase safety and reliability as well as reduce cost. Operational efficiency must be an initial program goal. Design technology and management philosophy must be implemented early to ensure operational cost goals. Manufacturing cost and launch cost are related to operational efficiency. True program savings can be realized through implementation of launch operations cost saving approaches which do not correspondingly increase cost in other program areas such as manufacturing and software development and maintenance. Launch rate is a key factor in the cost/flight analysis and the determination of launch operations efficiency goals.

  16. Crew Transportation Operations Standards

    NASA Technical Reports Server (NTRS)

    Mango, Edward J.; Pearson, Don J. (Compiler)

    2013-01-01

    The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

  17. Lageos assembly operation plan

    NASA Technical Reports Server (NTRS)

    Brueger, J.

    1975-01-01

    Guidelines and constraints procedures for LAGEOS assembly, operation, and design performance are given. Special attention was given to thermal, optical, and dynamic analysis and testing. The operation procedures illustrate the interrelation and sequence of tasks in a flow diagram. The diagram also includes quality assurance functions for verification of operation tasks.

  18. Problem Behaviors as Operants

    ERIC Educational Resources Information Center

    Hoyer, William J.; And Others

    1975-01-01

    Many of the clinically disabling behaviors of elderly persons may be viewed as operants. Research bearing on the efficacy of operant techniques for programming individualized, group based, and ward-wide therapeutic intervention is reviewed. Suggests the operant view is useful for conceptualizing and treating many problem behaviors of elderly…

  19. Operations and maintenance philosophy

    SciTech Connect

    DUNCAN, G.P.

    1999-10-28

    This Operations and Maintenance (O&M) Philosophy document is intended to establish a future O&M vision, with an increased focus on minimizing worker exposure, ensuring uninterrupted retrieval operations, and minimizing operation life-cycle cost. It is intended that this document would incorporate O&M lessons learned into on-going and future project upgrades.

  20. Operating US power reactors

    SciTech Connect

    Silver, E.G.

    1982-07-01

    The operation of US power reactors during March and April 1982 is summarized. Events of special note are discussed in the text, and the operational performance of all licensed power reactors is presented. These data are taken from the monthly Operating Units Status Report prepared by the Nuclear Regulatory Commission (NRC).

  1. Payroll/Operations Analysis.

    ERIC Educational Resources Information Center

    San Diego Community Coll. District, CA. Research Office.

    Based on the findings of an operations research project undertaken by the San Diego Community College District (SDCCD), this report presents recommendations for improving the organizational structure of SDCCD's payroll/operations department. The report first outlines 15 organizational and operations problems confronting the department as revealed…

  2. Shuttle operations era planning for flight operations

    NASA Technical Reports Server (NTRS)

    Holt, J. D.; Beckman, D. A.

    1984-01-01

    The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

  3. PFBC plant operations

    SciTech Connect

    Kinsinger, F.L. )

    1992-01-01

    By operating a fluidized bed at elevated pressures, known as pressurized fluidized bed combustion (PFBC), advantages can be gained over atmospheric fluidized bed technology. Operating the process at elevated pressures allows electrical production from both the steam and the gas cycles which results in higher plant efficiencies. Additional benefits of operating at elevated pressures include the further reduction of emissions and the reduction in the physical size of the power plant. This paper describes the operation of a PFBC plant and its application at the Tidd clean coal demonstration project. Actual operating experience will be presented.

  4. Payload operation television system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Payload Operation Television System is a high performance closed-circuit TV system designed to determine the feasibility of using TV to augment purely visual monitoring of operations, and to establish optimum system design of an operating unit which can ultimately be used to assist the operator of a remotely manipulated space-borne cargo loading device. The TV system assembled on this program is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator.

  5. Plasma-surface interactions in TFTR D-T experiments

    SciTech Connect

    Owens, D.K.; Adler, H.; Alling, P.

    1995-03-01

    TFTR has begun its campaign to study deuterium-tritium fusion under reactor-like conditions. Variable amounts of deuterium and tritium neutral beam power have been used to maximize fusion power, study alpha heating, investigate alpha particle confinement, and search for alpha driven plasma instabilities. Additional areas of study include energy and particle transport and confinement, ICRF heating schemes for DT plasmas, tritium retention, and fusion in high {beta}{sub p} plasmas. The majority of this work is done in the TFTR supershot confinement regime. To obtain supershots, extensive limiter conditioning using helium fueled ohmic discharges and lithium pellet injection into ohmic and neutral beam heated plasmas is performed, resulting in a low recycling limiter. The relationship between recycling and core plasma confinement has been studied by using helium, deuterium and high-Z gas puffs to simulate high recycling limiter conditions. These studies show that confinement in TFTR supershots is very sensitive to the influx of neutral particles at the plasma edge.

  6. Hermeneutic operative calculus

    NASA Astrophysics Data System (ADS)

    Ramakrishnan, Sivakumar; Isawasan, Pradeep; Mohanan, Vasuky

    2014-07-01

    The predicate calculus used currently by mathematical logic in computer science, philosophy and linguistic was found to be too restrictive and inadequate for describing the grammar of natural and artificial language. Therefore many higher order logics have been developed to overcome the limitation of predicate calculus. In this paper a new representation of logic using mathematical principles has been developed for the natural language called Hermeneutic Operative Calculus. This Hermeneutic Operative Calculus is a new language interpretive calculus developed to account for the syntactic, semantic and pragmatic features of natural language and allows removing the restrictions of any particular natural language in the semantic field its map out. The logic of Hermeneutic Operative Calculus capable of represent the syntactic and semantic of factual information of a natural language precisely in any language. The logic of this Hermeneutic Operative Calculus has two different forms of operations called object and meta-operations. The object operation allow for listing the various objects, picturing the various propositions and so forth. The meta-operation would specify what cannot be specified by the object operation like semantical stances of a proposition. The basic operative processes of linguistics and cognitive logic will be mathematically conceptualized and elaborated in this paper.

  7. Operational health physics.

    PubMed

    Miller, Kenneth L

    2005-06-01

    A review of the operational health physics papers published in Health Physics and Operational Radiation Safety over the past fifteen years indicated seventeen general categories or areas into which the topics could be readily separated. These areas include academic research programs, use of computers in operational health physics, decontamination and decommissioning, dosimetry, emergency response, environmental health physics, industrial operations, medical health physics, new procedure development, non-ionizing radiation, radiation measurements, radioactive waste disposal, radon measurement and control, risk communication, shielding evaluation and specification, staffing levels for health physics programs, and unwanted or orphan sources. That is not to say that there are no operational papers dealing with specific areas of health physics, such as power reactor health physics, accelerator health physics, or governmental health physics. On the contrary, there have been a number of excellent operational papers from individuals in these specialty areas and they are included in the broader topics listed above. A listing and review of all the operational papers that have been published is beyond the scope of this discussion. However, a sampling of the excellent operational papers that have appeared in Health Physics and Operational Radiation Safety is presented to give the reader the flavor of the wide variety of concerns to the operational health physicist and the current areas of interest where procedures are being refined and solutions to problems are being developed. PMID:15891458

  8. Operational health physics.

    PubMed

    Miller, Kenneth L

    2005-01-01

    A review of the operational health physics papers published in Health Physics and Operational Radiation Safety over the past fifteen years indicated seventeen general categories or areas into which the topics could be readily separated. These areas include academic research programs, use of computers in operational health physics, decontamination and decommissioning, dosimetry, emergency response, environmental health physics, industrial operations, medical health physics, new procedure development, non-ionizing radiation, radiation measurements, radioactive waste disposal, radon measurement and control, risk communication, shielding evaluation and specification, staffing levels for health physics programs, and unwanted or orphan sources. That is not to say that there are no operational papers dealing with specific areas of health physics, such as power reactor health physics, accelerator health physics, or governmental health physics. On the contrary, there have been a number of excellent operational papers from individuals in these specialty areas and they are included in the broader topics listed above. A listing and review of all the operational papers that have been published is beyond the scope of this discussion. However, a sampling of the excellent operational papers that have appeared in Health Physics and Operational Radiation Safety is presented to give the reader the flavor of the wide variety of concerns to the operational health physicist and the current areas of interest where procedures are being refined and solutions to problems are being developed. PMID:15596985

  9. Operations management system

    NASA Technical Reports Server (NTRS)

    Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

    1990-01-01

    The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

  10. Reparametrization invariant collinear operators

    SciTech Connect

    Marcantonini, Claudio; Stewart, Iain W.

    2009-03-15

    In constructing collinear operators, which describe the production of energetic jets or energetic hadrons, important constraints are provided by reparametrization invariance (RPI). RPI encodes Lorentz invariance in a power expansion about a collinear direction, and connects the Wilson coefficients of operators at different orders in this expansion to all orders in {alpha}{sub s}. We construct reparametrization invariant collinear objects. The expansion of operators built from these objects provides an efficient way of deriving RPI relations and finding a minimal basis of operators, particularly when one has an observable with multiple collinear directions and/or soft particles. Complete basis of operators is constructed for pure glue currents at twist-4, and for operators with multiple collinear directions, including those appearing in e{sup +}e{sup -}{yields}3 jets, and for pp{yields}2 jets initiated via gluon fusion.

  11. Ulysses mission operations

    NASA Technical Reports Server (NTRS)

    Beech, P.

    1992-01-01

    The Ulysses mission is described in terms of in-Shuttle operations, initial in-orbit operations, routine operations, operational organization, and data gathering and production. The configuration of the Ulysses payload is illustrated, and the flight to orbit is described including a three-hour on-orbit checkout. The first contact was reported at the Deep Space Network station followed by an adjustment of the spacecraft solar-aspect angle and the acquisition of ranging and Doppler data. In-orbit operations include the earth acquisition maneuver, a trajectory correction maneuver, and a payload switch. Continuous data gathering is discussed with reference to the Jupiter encounter and the first and second oppositions and conjunctions. The data-gathering components comprise ground stations, a data-processing computer, and a data-records system. Data production is performed in an off-line mode that does not interfere with the real-time operations.

  12. Cask fleet operations study

    SciTech Connect

    Not Available

    1988-01-01

    The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system.

  13. Harmonic electron correlation operator.

    PubMed

    Rassolov, Vitaly A

    2011-07-21

    An appealing way to model electron correlation within the single determinant wave function formalism is through the expectation value of a linear two-electron operator. For practical reasons, it is desirable for such an operator to be universal, i.e., not depend on the positions and types of nuclei in a molecule. We show how a perturbation theory applied to a hookium atom provides for a particular form of a correlation operator, hence called the harmonic correlation operator. The correlation operator approach is compared and contrasted to the traditional ways to describe electron correlation. To investigate the two-electron approximation of this operator, we apply it to many-electron hookium systems. To investigate the harmonic approximation, we apply it to the small atomic systems. Directions of future research are also discussed. PMID:21786991

  14. Quantifying Uncertainties of Seasonal and Regional Evapotranspiration Estimates from Operational Simplified Surface Energy Balance Model in the Contiguous USA

    NASA Astrophysics Data System (ADS)

    Chen, M.; Senay, G. B.; Verdin, J. P.; Bohms, S.

    2015-12-01

    An operational simplified surface energy balance (SSEBop) model can provide site to regional and daily to seasonal evapotranspiration (ET) estimation. Like other ET models, SSEBop model also faces a challenging issue—uncertainty from inevitable input errors, poorly defined parameters, and inadequate model structures. Recent uncertainty assessment at multiple Ameriflux tower sites showed the uncertainties of seasonal ET estimates by the SSEBop model were within a reasonable range (less than 20%). In this study, we further quantified the uncertainties of seasonal SSEBop ET estimates at 1-km pixel resolution for the contiguous U.S.A. (CONUS) from 2001 to 2014. The uncertainty analysis focused on quantifying uncertainties from errors of key parameters (i.e., difference between cold and hot temperature boundaries (dT)) and primary driving forces, including the 8-day composite 1-km Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) data, Global Land Data Assimilation System daily air temperature data, and USGS/EROS daily short grass reference ET data. The sensitivity analysis indicated that relative errors of ET estimates from errors of input data and parameters were less than 20% in most areas of CONUS, except for western mountain areas with complex topography, southwestern bare desert areas with high albedo and dry climate conditions, and southeastern areas with high emissivity and humid climate conditions. The relative errors of ET estimates were around 30% in those specific areas where the large ET errors stemmed from errors of input data and parameters, such as LST data with errors over 1.5K, and dT with errors over 2.5K. The uncertainty assessment showed that SSEBop model is a reliable method for wide-area ET calculation. Reduction of errors from input variables (e.g., LST from MODIS) and key parameters (e.g., dT) in topographically complex areas and high albedo and emissivity surfaces can significantly improve the ET calculation

  15. Apollo Multiplexer operations manual

    SciTech Connect

    Miller, M.M.

    1985-04-01

    This report describes the operation of the the Apollo Multiplexer, a microprocessor based communications device designed to process data between an Apollo computer and up to four Gandalf PACXIV data switches. Details are given on overall operation, hardware, and troubleshooting. The reader should gain sufficient knowledge from this report to understand the operation of the multiplexer and effectively analyze and correct any problems that might occur.

  16. Network operating system

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Long-term and short-term objectives for the development of a network operating system for the Space Station are stated. The short-term objective is to develop a prototype network operating system for a 100 megabit/second fiber optic data bus. The long-term objective is to establish guidelines for writing a detailed specification for a Space Station network operating system. Major milestones are noted. Information is given in outline form.

  17. Implications for Operations

    NASA Astrophysics Data System (ADS)

    Arduini, G.; Lamont, M.; Pieloni, T.; Rumolo, G.

    The HL-LHC will introduce a number of novel operational features and challenges including luminosity leveling. After a brief recap of the possible leveling techniques, the potential impact of the operational regime on overall efficiency is discussed. A breakdown of the operational cycle and the standard operational year, together with a discussion of fault time is presented. The potential performance is then explored and estimates of the required machine availability and efficiency for 250 fb-1 per year are given. Finally the e-cloud challenges, scrubbing runs requirements, and machine development potential are outlined.

  18. Operator interface for vehicles

    DOEpatents

    Bissontz, Jay E

    2015-03-10

    A control interface for drivetrain braking provided by a regenerative brake and a non-regenerative brake is implemented using a combination of switches and graphic interface elements. The control interface comprises a control system for allocating drivetrain braking effort between the regenerative brake and the non-regenerative brake, a first operator actuated control for enabling operation of the drivetrain braking, and a second operator actuated control for selecting a target braking effort for drivetrain braking. A graphic display displays to an operator the selected target braking effort and can be used to further display actual braking effort achieved by drivetrain braking.

  19. Operation: Save Aunt Sally

    ERIC Educational Resources Information Center

    Zorin, Barbara; Carver, David, Jr.

    2015-01-01

    In grade 6, students should be able to "perform arithmetic operations, including those involving whole-number exponents, in the conventional order when there are no parentheses to specify a particular order" (p. 44). In grades 7 and 8, the rules of order of operations are used to simplify progressively complicated expressions and in…

  20. Crane and Excavator Operator.

    ERIC Educational Resources Information Center

    Marine Corps Inst., Washington, DC.

    Developed as part of the Marine Corps Institute (MCI) correspondence training program, this course on crane and excavator operation is designed to enable the crane and excavator operator to perform his/her duties more proficiently. Introductory materials include specific information for MCI students, a course introduction, and a study guide…

  1. Basic Sewage Treatment Operation.

    ERIC Educational Resources Information Center

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to introduce operators to the fundamentals of sewage plant operation. The course consists of lecture-discussions and hands-on activities. Each of the lessons has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in…

  2. CITY III Operator's Manual.

    ERIC Educational Resources Information Center

    Envirometrics, Inc., Washington, DC.

    CITY III is a computer-assisted simulation game of an urban system involving player operation of and interaction with economic, social, and government components. The role of operator in the game is to take the handwritten inputs (decisions) from the CITY III participants, process them, and return output which initiates the next round of…

  3. Irrigation Systems Operation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Effective operation of an irrigation system requires matching the operational characteristics of a system to the soil, crop, field, and water supply. Each of these components will affect the quality of the irrigation system performance. The performance measures used to characterize the irrigation sy...

  4. Planning the operation.

    PubMed

    Kiely, Edward M; Spitz, Lewis

    2015-10-01

    The management of conjoined twins falls into three distinct groups-non-operative, emergency separation and elective separation. Planning meetings involving all the personnel who will be required during the operation are held. The radiological findings are presented and the anaesthetic, nursing and intensive care requirements are highlighted. PMID:26382260

  5. Mission Operations Assurance

    NASA Technical Reports Server (NTRS)

    Faris, Grant

    2012-01-01

    Integrate the mission operations assurance function into the flight team providing: (1) value added support in identifying, mitigating, and communicating the project's risks and, (2) being an essential member of the team during the test activities, training exercises and critical flight operations.

  6. Automated radio astronomy operations

    NASA Technical Reports Server (NTRS)

    Livermore, R. W.

    1978-01-01

    The improvements in using a computer to drive a DSN 64-meter antenna are described. The development is used to simplify operation, improve antenna safety, reduce antenna wear, present the abuse of antenna by misoperation, increase quantity and quality of data gathered, and give users a greater choice of automatic operations.

  7. Video Telescope Operating Microscopy.

    PubMed

    Divers, Stephen J

    2015-09-01

    Exotic pet veterinarians frequently have to operate on small animals, and magnification is commonly used. Existing endoscopy equipment can be used with a mechanical arm and telescope to enable video telescope operating microscopy. The additional equipment items and their specifics are described, and several case examples are provided. PMID:26117519

  8. Equipment Operator 1 & C.

    ERIC Educational Resources Information Center

    Naval Education and Training Program Development Center, Pensacola, FL.

    The Rate Training Manual and Nonresident Career Course (RTM/NRCC) form a self-study package to assist Navy Equipment Operators First and Chief in fulfilling the requirements of their rating. (Navy Equipment Operators First and Chief direct and coordinate efforts of individuals and crews in construction, earthmoving, roadbuilding, quarrying, and…

  9. Science Operations Management

    NASA Astrophysics Data System (ADS)

    Squibb, Gael F.

    1984-10-01

    The operation teams for the Infrared Astronomical Satellite (IRAS) included scientists from the IRAS International Science Team. The scientific decisions on an hour-to-hour basis, as well as the long-term strategic decisions, were made by science team members. The IRAS scientists were involved in the analysis of the instrument performance, the analysis of the quality of the data, the decision to reacquire data that was contaminated by radiation effects, the strategy for acquiring the survey data, and the process for using the telescope for additional observations, as well as the processing decisions required to ensure the publication of the final scientific products by end of flight operations plus one year. Early in the project, two science team members were selected to be responsible for the scientific operational decisions. One, located at the operations control center in England, was responsible for the scientific aspects of the satellite operations; the other, located at the scientific processing center in Pasadena, was responsible for the scientific aspects of the processing. These science team members were then responsible for approving the design and test of the tools to support their responsibilities and then, after launch, for using these tools in making their decisions. The ability of the project to generate the final science data products one year after the end of flight operations is due in a large measure to the active participation of the science team members in the operations. This paper presents a summary of the operational experiences gained from this scientific involvement.

  10. Special Operation. Module 20.

    ERIC Educational Resources Information Center

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special operations, one in a series dealing with industrial sewing machines, their attachments, and operation, covers two topics: topstitching and mitering. For each topic these components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and a check-out…

  11. Waterworks Operator Training Manual.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    Sixteen self-study waterworks operators training modules are provided. Module titles are the following: basic mathematics, basic chemistry, analysis procedures, microbiology, basic electricity, hydraulics, chlorination, plant operation, surface water, ground water, pumps, cross connections, distribution systems, safety, public relations, and…

  12. STARPAHC operational report

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The results of the first one and one-half years of operation of the STARPAHC system are presented. An operational cost summary analysis is included as well as the following; (1) Medical evaluation results, (2) system usage, and (3) hardware evaluation results.

  13. Nuclear Powerplant Safety: Operations.

    ERIC Educational Resources Information Center

    Department of Energy, Washington, DC. Nuclear Energy Office.

    Powerplant systems and procedures that ensure the day-to-day health and safety of people in and around the plant is referred to as operational safety. This safety is the result of careful planning, good engineering and design, strict licensing and regulation, and environmental monitoring. Procedures that assure operational safety at nuclear…

  14. Custodial Operations: Green & Sustainable

    ERIC Educational Resources Information Center

    Campbell, J. Kirk

    2008-01-01

    Custodial Operations can have a significant impact on institutional green and sustainable goals if given the proper support and challenge. This article describes the green and sustainable custodial operations in place at Carleton College in Northfield, Minnesota. The article reviews the college's sustainable efforts on biodegradables, packaging,…

  15. Aircraft operations management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  16. Stirling machine operating experience

    NASA Technical Reports Server (NTRS)

    Ross, Brad; Dudenhoefer, James E.

    1991-01-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that Stirling machines are capable of reliable and lengthy lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and were not expected to operate for any lengthy period of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered.

  17. CAM operated fuel valve

    SciTech Connect

    Kelly, S.T.; Katchka, J.R.

    1991-09-03

    This patent describes improvement in a fuel control valve construction comprising a housing means having an inlet means adapted to be interconnected to a fuel source and a main outlet means adapted to be interconnected to a main burner means, the housing means having a main valve seat for interconnecting the inlet means with the main outlet means, the housing means having a movable main valve member for opening and closing the main valve seat, the housing means having a movable lever operatively associated with the main valve member and having a manually operable actuator means for controlling the operating positions of the lever, the lever having an intermediate cam follower portion and opposed ends disposed on each side of the cam follower portion with one end of the opposed ends being pivotally mounted to the housing means and with the other end of the opposed ends for operating the main valve member, the housing means having biasing means operatively interconnected to the lever to tend to pivot the lever in one direction that opens the main valve member away from its the main valve seat. The improvement comprises; the housing means has a thermostatically controlled means that is operatively associated with the lever and is adapted to engage and hold the lever in a position wherein the main valve member is in a closed condition against its the main valve seat when the thermostatically controlled means is in one operating condition thereof and the actuator means is in the on condition thereof.

  18. Stirling machine operating experience

    SciTech Connect

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  19. Magellan Telescopes operations 2008

    NASA Astrophysics Data System (ADS)

    Osip, David J.; Phillips, Mark M.; Palunas, Povilas; Perez, Frank; Leroy, M.

    2008-07-01

    The twin 6.5m Magellan Telescopes have been in routine operations at the Las Campanas Observatory in the Chilean Andes since 2001 and 2002 respectively. The telescopes are owned and operated by Carnegie for the benefit of the Magellan consortium members (Carnegie Institution of Washington, Harvard University, the University of Arizona, Massachusetts Institute of Technology, and the University of Michigan). This paper provides an up to date review of the scientific, technical, and administrative structure of the 'Magellan Model' for observatory operations. With a modest operations budget and a reasonably small staff, the observatory is operated in the "classical" mode, wherein the visiting observer is a key member of the operations team. Under this model, all instrumentation is supplied entirely by the consortium members and the various instrument teams continue to play a critical support role beyond initial deployment and commissioning activities. Here, we present a critical analysis of the Magellan operations model and suggest lessons learned and changes implemented as we continue to evolve an organizational structure that can efficiently deliver a high scientific return for the investment of the partners.

  20. NSI operations center

    NASA Technical Reports Server (NTRS)

    Zanley, Nancy L.

    1991-01-01

    The NASA Science Internet (NSI) Network Operations Staff is responsible for providing reliable communication connectivity for the NASA science community. As the NSI user community expands, so does the demand for greater interoperability with users and resources on other networks (e.g., NSFnet, ESnet), both nationally and internationally. Coupled with the science community's demand for greater access to other resources is the demand for more reliable communication connectivity. Recognizing this, the NASA Science Internet Project Office (NSIPO) expands its Operations activities. By January 1990, Network Operations was equipped with a telephone hotline, and its staff was expanded to six Network Operations Analysts. These six analysts provide 24-hour-a-day, 7-day-a-week coverage to assist site managers with problem determination and resolution. The NSI Operations staff monitors network circuits and their associated routers. In most instances, NSI Operations diagnoses and reports problems before users realize a problem exists. Monitoring of the NSI TCP/IP Network is currently being done with Proteon's Overview monitoring system. The Overview monitoring system displays a map of the NSI network utilizing various colors to indicate the conditions of the components being monitored. Each node or site is polled via the Simple Network Monitoring Protocol (SNMP). If a circuit goes down, Overview alerts the Network Operations staff with an audible alarm and changes the color of the component. When an alert is received, Network Operations personnel immediately verify and diagnose the problem, coordinate repair with other networking service groups, track problems, and document problem and resolution into a trouble ticket data base. NSI Operations offers the NSI science community reliable connectivity by exercising prompt assessment and resolution of network problems.

  1. Operations and maintenance manual for the LDUA operations control trailer

    SciTech Connect

    Clark, D.A.

    1996-08-06

    The Light Duty Utility Arm (LDUA) Operations Control Trailer has completed testing and is ready for operation. This document defines the requirements applicable to the operation and maintenance of the Operations Control Trailer.

  2. The first regularized trace of integro-differential Sturm-Liouville operator on the segment with punctured points at integral perturbation of transmission conditions

    NASA Astrophysics Data System (ADS)

    Aimakhanova, Aizat Sh.; Shalginbayeva, Saltanat Kh.; Zhumanova, Lyazzat K.

    2016-08-01

    The paper is devoted to calculation of a first regularized trace of one integro-differential operator with the main part of the Sturm-Liouville type on a segment with punctured points at integral perturbation of "transmission" conditions. The Sturm-Liouville operator -y″(x )+q (x )y (x )+γ ∫0πy (t ) d t =λ y (x ) given on the segments π/n (k -1 )d t , k =1 , n -1 ¯. The basic result of the paper is the exact formula of the first regularized trace of the considered differential operator.

  3. Quantum Operation Time Reversal

    SciTech Connect

    Crooks, Gavin E.

    2008-03-25

    The dynamics of an open quantum system can be described by a quantum operation: A linear, complete positive map of operators. Here, I exhibit a compact expression for the time reversal of a quantum operation, which is closely analogous to the time reversal of a classical Markov transition matrix. Since open quantum dynamics are stochastic, and not, in general, deterministic, the time reversal is not, in general, an inversion of the dynamics. Rather, the system relaxes toward equilibrium in both the forward and reverse time directions. The probability of a quantum trajectory and the conjugate, time reversed trajectory are related by the heat exchanged with the environment.

  4. Estimating airline operating costs

    NASA Technical Reports Server (NTRS)

    Maddalon, D. V.

    1978-01-01

    A review was made of the factors affecting commercial aircraft operating and delay costs. From this work, an airline operating cost model was developed which includes a method for estimating the labor and material costs of individual airframe maintenance systems. The model, similar in some respects to the standard Air Transport Association of America (ATA) Direct Operating Cost Model, permits estimates of aircraft-related costs not now included in the standard ATA model (e.g., aircraft service, landing fees, flight attendants, and control fees). A study of the cost of aircraft delay was also made and a method for estimating the cost of certain types of airline delay is described.

  5. Pretraining plant operators

    SciTech Connect

    George, T.J.; Claypoole, G.T.; Sherren, D.C.

    1980-06-01

    A new approach to training utility plant operators who can cope with the increasing technological demands of plant operation precedes industry training programs with formal entry-level training at educational and research facilities. This pretraining allows potential operators to be screened and offers an appropriate curriculum prior to employment. The educational guidelines can be set out in a manual and reinforced with qualification tests, counseling, and student assessments. Classroom instruction can give students a basic knowledge of plant procedures. Students who aim for managerial positions can continue beyond the vocational technical setting to university courses. (DCK)

  6. Operating plan FY 1998

    SciTech Connect

    1997-10-01

    This document is the first edition of Argonne`s new Operating Plan. The Operating Plan complements the strategic planning in the Laboratory`s Institutional Plan by focusing on activities that are being pursued in the immediate fiscal year, FY 1998. It reflects planning that has been done to date, and it will serve in the future as a resource and a benchmark for understanding the Laboratory`s performance. The heart of the Institutional Plan is the set of major research initiatives that the Laboratory is proposing to implement in future years. In contrast, this Operating Plan focuses on Argonne`s ongoing R&D programs, along with cost-saving measures and other improvements being implemented in Laboratory support operations.

  7. CH Packaging Operations Manual

    SciTech Connect

    Washington TRU Solutions LLC

    2005-06-13

    This procedure provides instructions for assembling the CH Packaging Drum payload assembly, Standard Waste Box (SWB) assembly, Abnormal Operations and ICV and OCV Preshipment Leakage Rate Tests on the packaging seals, using a nondestructive Helium (He) Leak Test.

  8. CALIPSO Instrument Operational

    Atmospheric Science Data Center

    2014-09-18

    CALIPSO Instrument Operational Thursday, September 11, 2014 The CALIPSO payload is back in data acquisition mode as of Wednesday, September 17, 2014.  CALIPSO data processing has returned to a nominal state, and...

  9. Nuclear material operations manual

    SciTech Connect

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  10. Reduction/Transformation Operators

    SciTech Connect

    Bartlett, Roscoe A.

    2006-09-01

    RTOp (reduction/transformation operators) is a collection of C++ software that provides the basic mechanism for implementinig vector operations in a flexible and efficient manner. This is the main interface utilized by Thyra to allow for the specification of specific vector reduction and/or transformation operations. The RTOp package contains three different types of software. (a) a small number of interoperability interfaces. (b) support software including code for the parallel SPMD mode based on only Teuchos::Comm(and not MPl directly(, and (c) a library of pre-implemented RTOp subclasses for everything from simple AXPYs and norms, to more specialized vector operations. RTOp allows an algorithm developer to implement their own RTOp subclasses in a way that is independent from any specific serial, parallel, out-of-core or other type of vector implementation. RTOp is a required package by Thyra and MOOCHO. (c)

  11. Space Medicine Medical Operations

    NASA Video Gallery

    This is an overview of the Space and Clinical Operations Division whose mission is to optimize the health, fitness and well-being of flight crews, their dependents and employees of the Johnson Spac...

  12. Operant Conditioning and Education.

    ERIC Educational Resources Information Center

    de Noronha, Mario

    A case study of a learning disabled 8-year-old with behavior disturbancs is presented to highlight the use of operant conditioning in cutting down educational costs and easing the teacher's class management problems. (CL)

  13. Space Mission Operations Concept

    NASA Technical Reports Server (NTRS)

    Squibb, Gael F.

    1996-01-01

    This paper will discuss the concept of developing a space mission operations concept; the benefits of starting this system engineering task early; the neccessary inputs to the process; and the products that are generated.

  14. Reduction/Transformation Operators

    Energy Science and Technology Software Center (ESTSC)

    2006-09-01

    RTOp (reduction/transformation operators) is a collection of C++ software that provides the basic mechanism for implementinig vector operations in a flexible and efficient manner. This is the main interface utilized by Thyra to allow for the specification of specific vector reduction and/or transformation operations. The RTOp package contains three different types of software. (a) a small number of interoperability interfaces. (b) support software including code for the parallel SPMD mode based on only Teuchos::Comm(and notmore » MPl directly(, and (c) a library of pre-implemented RTOp subclasses for everything from simple AXPYs and norms, to more specialized vector operations. RTOp allows an algorithm developer to implement their own RTOp subclasses in a way that is independent from any specific serial, parallel, out-of-core or other type of vector implementation. RTOp is a required package by Thyra and MOOCHO. (c)« less

  15. Operator Certification Study Guide.

    ERIC Educational Resources Information Center

    American Water Works Association, Denver, CO.

    This study guide contains typical questions and answers that all levels of water treatment plant operators might expect to find on a certification examination. The manual covers the basic sciences, treatment techniques, testing procedures, and federal legislation. (Author/SB)

  16. Operation Waste Watch.

    ERIC Educational Resources Information Center

    Groover, Richard S.

    1981-01-01

    Operation Waste Watch is a seven-unit program for grades K-6 which addresses such topics as litter control, recycling, and resources recovery. It is designed to instill in students positive feelings about the environment. (DS)

  17. Enabler operator station

    NASA Technical Reports Server (NTRS)

    Bailey, Andrea; Kietzman, John; King, Shirlyn; Stover, Rae; Wegner, Torsten

    1992-01-01

    The objective of this project was to design an onboard operator station for the conceptual Lunar Work Vehicle (LWV). The LWV would be used in the colonization of a lunar outpost. The details that follow, however, are for an Earth-bound model. The operator station is designed to be dimensionally correct for an astronaut wearing the current space shuttle EVA suit (which include life support). The proposed operator station will support and restrain an astronaut as well as to provide protection from the hazards of vehicle rollover. The threat of suit puncture is eliminated by rounding all corners and edges. A step-plate, located at the front of the vehicle, provides excellent ease of entry and exit. The operator station weight requirements are met by making efficient use of rigid members, semi-rigid members, and woven fabrics.

  18. Operational waste volume projection

    SciTech Connect

    Koreski, G.M.; Strode, J.N.

    1995-06-01

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the tri-party agreement. Assumptions are current as of June 1995.

  19. Operational Waste Volume Projection

    SciTech Connect

    STRODE, J.N.

    1999-08-24

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2018 are projected based on assumption as of July 1999. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement.

  20. Estimating Airline Operating Costs

    NASA Technical Reports Server (NTRS)

    Maddalon, D. V.

    1978-01-01

    The factors affecting commercial aircraft operating and delay costs were used to develop an airline operating cost model which includes a method for estimating the labor and material costs of individual airframe maintenance systems. The model permits estimates of aircraft related costs, i.e., aircraft service, landing fees, flight attendants, and control fees. A method for estimating the costs of certain types of airline delay is also described.

  1. Wendelstein Observatory Operations Software

    NASA Astrophysics Data System (ADS)

    Gössl, C. A.; Snigula, J. M.; Munzert, T.

    2014-05-01

    LMU München operates an astrophysical observatory on Mt. Wendelstein which has been equipped with a modern 2m-class telescope recently. The new Fraunhofer telescope is starting science operations now with a 64 Mpixel, 0.5°×0.5° FoV wide field camera and will successively be equipped with a three channel optical/NIR camera and two fibre coupled spectrographs (IFU spectrograph VIRUSW already in operation at the 2.7m McDonald, Texas and an upgraded Echelle spectrograph FOCES formerly operated at Calar Alto oberservatory, Spain). All instruments will be mounted simultaneously and can be activated within a minute. The observatory also operates a small 40cm telescope with a CCD-camera and a simple fibre coupled spectrograph for students lab and photometric monitoring as well as a large number of support equipment like a meteo station, allsky cameras, a multitude of webcams, in addition to a complex building control system environment. Here we describe the ongoing effort to build a centralised controlling interface for all. This includes remote/robotic operation, visualisation via browser technologies, and data processing and archiving.

  2. HP upgrade operational streamlining

    NASA Technical Reports Server (NTRS)

    Edge, David R.; Emenheiser, Kenneth S.; Hanrahan, William P., III; Mccollums, D.; Seery, Paul J.; Ricklefs, Randall L.

    1993-01-01

    New computer technology and resources must be successfully integrated into CDSLR station operations to manage new complex operational tracking requirements, support the on site production of new data products, support ongoing station performance improvements, and to support new station communication requirements. The NASA CDSLR Network is in the process of upgrading station computer resources with HP UNIX workstations, designed to automate a wide range of operational station requirements. The primary HP upgrade objective was to relocate computer intensive data system tasks from the controller computer to a new advanced computer environment designed to meet the new data system requirements. The HP UNIX environment supports fully automated real time data communications, data management, data processing, and data quality control. Automated data compression procedures are used to improve the efficiency of station data communications. In addition, the UNIX environment supports a number of semi-automated technical and administrative operational station tasks. The x window user interface generates multiple simultaneous color graphics displays, providing direct operator visibility and control over a wide range of operational station functions.

  3. Operational Dynamic Configuration Analysis

    NASA Technical Reports Server (NTRS)

    Lai, Chok Fung; Zelinski, Shannon

    2010-01-01

    Sectors may combine or split within areas of specialization in response to changing traffic patterns. This method of managing capacity and controller workload could be made more flexible by dynamically modifying sector boundaries. Much work has been done on methods for dynamically creating new sector boundaries [1-5]. Many assessments of dynamic configuration methods assume the current day baseline configuration remains fixed [6-7]. A challenging question is how to select a dynamic configuration baseline to assess potential benefits of proposed dynamic configuration concepts. Bloem used operational sector reconfigurations as a baseline [8]. The main difficulty is that operational reconfiguration data is noisy. Reconfigurations often occur frequently to accommodate staff training or breaks, or to complete a more complicated reconfiguration through a rapid sequence of simpler reconfigurations. Gupta quantified a few aspects of airspace boundary changes from this data [9]. Most of these metrics are unique to sector combining operations and not applicable to more flexible dynamic configuration concepts. To better understand what sort of reconfigurations are acceptable or beneficial, more configuration change metrics should be developed and their distribution in current practice should be computed. This paper proposes a method to select a simple sequence of configurations among operational configurations to serve as a dynamic configuration baseline for future dynamic configuration concept assessments. New configuration change metrics are applied to the operational data to establish current day thresholds for these metrics. These thresholds are then corroborated, refined, or dismissed based on airspace practitioner feedback. The dynamic configuration baseline selection method uses a k-means clustering algorithm to select the sequence of configurations and trigger times from a given day of operational sector combination data. The clustering algorithm selects a simplified

  4. Autonomous mission operations

    NASA Astrophysics Data System (ADS)

    Frank, J.; Spirkovska, L.; McCann, R.; Wang, Lui; Pohlkamp, K.; Morin, L.

    NASA's Advanced Exploration Systems Autonomous Mission Operations (AMO) project conducted an empirical investigation of the impact of time delay on today's mission operations, and of the effect of processes and mission support tools designed to mitigate time-delay related impacts. Mission operation scenarios were designed for NASA's Deep Space Habitat (DSH), an analog spacecraft habitat, covering a range of activities including nominal objectives, DSH system failures, and crew medical emergencies. The scenarios were simulated at time delay values representative of Lunar (1.2-5 sec), Near Earth Object (NEO) (50 sec) and Mars (300 sec) missions. Each combination of operational scenario and time delay was tested in a Baseline configuration, designed to reflect present-day operations of the International Space Station, and a Mitigation configuration in which a variety of software tools, information displays, and crew-ground communications protocols were employed to assist both crews and Flight Control Team (FCT) members with the long-delay conditions. Preliminary findings indicate: 1) Workload of both crewmembers and FCT members generally increased along with increasing time delay. 2) Advanced procedure execution viewers, caution and warning tools, and communications protocols such as text messaging decreased the workload of both flight controllers and crew, and decreased the difficulty of coordinating activities. 3) Whereas crew workload ratings increased between 50 sec and 300 sec of time delay in the Baseline configuration, workload ratings decreased (or remained flat) in the Mitigation configuration.

  5. Operational cost drivers

    NASA Technical Reports Server (NTRS)

    Scholz, Arthur L.; Dickinson, William J.

    1988-01-01

    To be economically viable, the operations cost of launch vehicles must be reduced by an order of magnitude as compared to the Space Transportation System (STS). A summary of propulsion-related operations cost drivers derived from a two-year study of Shuttle ground operations is presented. Examples are given of the inordinate time and cost of launch operations caused by propulsion systems designs that did not adequately consider impacts on prelaunching processing. Typical of these cost drivers are those caused by central hydraulic systems, storable propellants, gimballed engines, multiple propellants, He and N2 systems and purges, hard starts, high maintenance turbopumps, accessibility problems, and most significantly, the use of multiple, nonintegrated RCS, OMS, and main propulsion systems. Recovery and refurbishment of SRBs have resulted in expensive crash and salvage operations. Vehicle system designers are encouraged to be acutely aware of these cost drivers and to incorporate solutions (beginning with the design concepts) to avoid business as usual and costs as usual.

  6. SSME Key Operations Demonstration

    NASA Technical Reports Server (NTRS)

    Anderson, Brian; Bradley, Michael; Ives, Janet

    1997-01-01

    A Space Shuttle Main Engine (SSME) test program was conducted between August 1995 and May 1996 using the Technology Test Bed (TTB) Engine. SSTO vehicle studies have indicated that increases in the propulsion system operating range can save significant weight and cost at the vehicle level. This test program demonstrated the ability of the SSME to accommodate a wide variation in safe operating ranges and therefore its applicability to the SSTO mission. A total of eight tests were completed with four at Marshall Space Flight Center's Advanced Engine Test Facility and four at the Stennis Space Center (SSC) A-2 attitude test stand. Key demonstration objectives were: 1) Mainstage operation at 5.4 to 6.9 mixture ratio; 2) Nominal engine start with significantly reduced engine inlet pressures of 50 psia LOX and 38 psia fuel; and 3) Low power level operation at 17%, 22%, 27%, 40%, 45%, and 50% of Rated Power Level. Use of the highly instrumented TTB engine for this test series has afforded the opportunity to study in great detail engine system operation not possible with a standard SSME and has significantly contributed to a greater understanding of the capabilities of the SSME and liquid rocket engines in general.

  7. Radioastron flight operations

    NASA Technical Reports Server (NTRS)

    Altunin, V. I.; Sukhanov, K. G.; Altunin, K. R.

    1993-01-01

    Radioastron is a space-based very-long-baseline interferometry (VLBI) mission to be operational in the mid-90's. The spacecraft and space radio telescope (SRT) will be designed, manufactured, and launched by the Russians. The United States is constructing a DSN subnet to be used in conjunction with a Russian subnet for Radioastron SRT science data acquisition, phase link, and spacecraft and science payload health monitoring. Command and control will be performed from a Russian tracking facility. In addition to the flight element, the network of ground radio telescopes which will be performing co-observations with the space telescope are essential to the mission. Observatories in 39 locations around the world are expected to participate in the mission. Some aspects of the mission that have helped shaped the flight operations concept are: separate radio channels will be provided for spacecraft operations and for phase link and science data acquisition; 80-90 percent of the spacecraft operational time will be spent in an autonomous mode; and, mission scheduling must take into account not only spacecraft and science payload constraints, but tracking station and ground observatory availability as well. This paper will describe the flight operations system design for translating the Radioastron science program into spacecraft executed events. Planning for in-orbit checkout and contingency response will also be discussed.

  8. Purposive discovery of operations

    NASA Technical Reports Server (NTRS)

    Sims, Michael H.; Bresina, John L.

    1992-01-01

    The Generate, Prune & Prove (GPP) methodology for discovering definitions of mathematical operators is introduced. GPP is a task within the IL exploration discovery system. We developed GPP for use in the discovery of mathematical operators with a wider class of representations than was possible with the previous methods by Lenat and by Shen. GPP utilizes the purpose for which an operator is created to prune the possible definitions. The relevant search spaces are immense and there exists insufficient information for a complete evaluation of the purpose constraint, so it is necessary to perform a partial evaluation of the purpose (i.e., pruning) constraint. The constraint is first transformed so that it is operational with respect to the partial information, and then it is applied to examples in order to test the generated candidates for an operator's definition. In the GPP process, once a candidate definition survives this empirical prune, it is passed on to a theorem prover for formal verification. We describe the application of this methodology to the (re)discovery of the definition of multiplication for Conway numbers, a discovery which is difficult for human mathematicians. We successfully model this discovery process utilizing information which was reasonably available at the time of Conway's original discovery. As part of this discovery process, we reduce the size of the search space from a computationally intractable size to 3468 elements.

  9. About APPLE II Operation

    SciTech Connect

    Schmidt, T.; Zimoch, D.

    2007-01-19

    The operation of an APPLE II based undulator beamline with all its polarization states (linear horizontal and vertical, circular and elliptical, and continous variation of the linear vector) requires an effective description allowing an automated calculation of gap and shift parameter as function of energy and operation mode. The extension of the linear polarization range from 0 to 180 deg. requires 4 shiftable magnet arrrays, permitting use of the APU (adjustable phase undulator) concept. Studies for a pure fixed gap APPLE II for the SLS revealed surprising symmetries between circular and linear polarization modes allowing for simplified operation. A semi-analytical model covering all types of APPLE II and its implementation will be presented.

  10. Disappearing Q operator

    NASA Astrophysics Data System (ADS)

    Jones, H. F.; Rivers, R. J.

    2007-01-01

    In the Schrödinger formulation of non-Hermitian quantum theories a positive-definite metric operator η≡e-Q must be introduced in order to ensure their probabilistic interpretation. This operator also gives an equivalent Hermitian theory, by means of a similarity transformation. If, however, quantum mechanics is formulated in terms of functional integrals, we show that the Q operator makes only a subliminal appearance and is not needed for the calculation of expectation values. Instead, the relation to the Hermitian theory is encoded via the external source j(t). These points are illustrated and amplified for two non-Hermitian quantum theories: the Swanson model, a non-Hermitian transform of the simple harmonic oscillator, and the wrong-sign quartic oscillator, which has been shown to be equivalent to a conventional asymmetric quartic oscillator.

  11. Disappearing Q operator

    SciTech Connect

    Jones, H. F.; Rivers, R. J.

    2007-01-15

    In the Schroedinger formulation of non-Hermitian quantum theories a positive-definite metric operator {eta}{identical_to}e{sup -Q} must be introduced in order to ensure their probabilistic interpretation. This operator also gives an equivalent Hermitian theory, by means of a similarity transformation. If, however, quantum mechanics is formulated in terms of functional integrals, we show that the Q operator makes only a subliminal appearance and is not needed for the calculation of expectation values. Instead, the relation to the Hermitian theory is encoded via the external source j(t). These points are illustrated and amplified for two non-Hermitian quantum theories: the Swanson model, a non-Hermitian transform of the simple harmonic oscillator, and the wrong-sign quartic oscillator, which has been shown to be equivalent to a conventional asymmetric quartic oscillator.

  12. Payload operation television system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The TV system assembled is intended for laboratory experimentation which would develop operational techniques and lead to the design of space-borne TV equipment whose purpose would be to assist the astronaut-operator aboard a space station to load payload components. The TV system assembled for this program is a black and white, monocular, high performance system. The equipment consists principally of a good quality TV camera capable of high resolving power; a TV monitor; a sync generator for driving camera and monitor; and two pan/tilt units which are remotely controlled by the operator. One pan/tilt unit provides control of the pointing of the camera, the other similarly controls the position of a simulated payload.

  13. About APPLE II Operation

    NASA Astrophysics Data System (ADS)

    Schmidt, T.; Zimoch, D.

    2007-01-01

    The operation of an APPLE II based undulator beamline with all its polarization states (linear horizontal and vertical, circular and elliptical, and continous variation of the linear vector) requires an effective description allowing an automated calculation of gap and shift parameter as function of energy and operation mode. The extension of the linear polarization range from 0 to 180° requires 4 shiftable magnet arrrays, permitting use of the APU (adjustable phase undulator) concept. Studies for a pure fixed gap APPLE II for the SLS revealed surprising symmetries between circular and linear polarization modes allowing for simplified operation. A semi-analytical model covering all types of APPLE II and its implementation will be presented.

  14. Achieving TASAR Operational Readiness

    NASA Technical Reports Server (NTRS)

    Wing, David J.

    2015-01-01

    NASA has been developing and testing the Traffic Aware Strategic Aircrew Requests (TASAR) concept for aircraft operations featuring a NASA-developed cockpit automation tool, the Traffic Aware Planner (TAP), which computes traffic/hazard-compatible route changes to improve flight efficiency. The TAP technology is anticipated to save fuel and flight time and thereby provide immediate and pervasive benefits to the aircraft operator, as well as improving flight schedule compliance, passenger comfort, and pilot and controller workload. Previous work has indicated the potential for significant benefits for TASAR-equipped aircraft, and a flight trial of the TAP software application in the National Airspace System has demonstrated its technical viability. This paper reviews previous and ongoing activities to prepare TASAR for operational use.

  15. Studies of the B-Z transition of DNA: The temperature dependence of the free-energy difference, the composition of the counterion sheath in mixed salt, and the preparation of a sample of the 5'-d[T-(m(5) C-G)12 -T] duplex in pure B-DNA or Z-DNA form.

    PubMed

    Guéron, Maurice; Plateau, Pierre; Filoche, Marcel

    2016-07-01

    It is often envisioned that cations might coordinate at specific sites of nucleic acids and play an important structural role, for instance in the transition between B-DNA and Z-DNA. However, nucleic acid models explicitly devoid of specific sites may also exhibit features previously considered as evidence for specific binding. Such is the case of the "composite cylinder" (or CC) model which spreads out localized features of DNA structure and charge by cylindrical averaging, while sustaining the main difference between the B and Z structures, namely the better immersion of the B-DNA phosphodiester charges in the solution. Here, we analyze the non-electrostatic component of the free-energy difference between B-DNA and Z-DNA. We also compute the composition of the counterion sheath in a wide range of mixed-salt solutions and of temperatures: in contrast with the large difference of composition between the B-DNA and Z-DNA forms, the temperature dependence of sheath composition, previously unknown, is very weak. In order to validate the model, the mixed-salt predictions should be compared to experiment. We design a procedure for future measurements of the sheath composition based on Anomalous Small-Angle X-ray Scattering and complemented by (31) P NMR. With due consideration for the kinetics of the B-Z transition and for the capacity of generating at will the B or Z form in a single sample, the 5'-d[T-(m(5) C-G)12 -T] 26-mer emerges as a most suitable oligonucleotide for this study. Finally, the application of the finite element method to the resolution of the Poisson-Boltzmann equation is described in detail. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 369-384, 2016. PMID:26900058

  16. Internet Based Remote Operations

    NASA Technical Reports Server (NTRS)

    Chamberlain, James

    1999-01-01

    This is the Final Report for the Internet Based Remote Operations Contract, has performed payload operations research support tasks March 1999 through September 1999. These tasks support the GSD goal of developing a secure, inexpensive data, voice, and video mission communications capability between remote payload investigators and the NASA payload operations team in the International Space Station (ISS) era. AZTek has provided feedback from the NASA payload community by utilizing its extensive payload development and operations experience to test and evaluate remote payload operations systems. AZTek has focused on use of the "public Internet" and inexpensive, Commercial-off-the-shelf (COTS) Internet-based tools that would most benefit "small" (e.g., $2 Million or less) payloads and small developers without permanent remote operations facilities. Such projects have limited budgets to support installation and development of high-speed dedicated communications links and high-end, custom ground support equipment and software. The primary conclusions of the study are as follows: (1) The trend of using Internet technology for "live" collaborative applications such as telescience will continue. The GSD-developed data and voice capabilities continued to work well over the "public" Internet during this period. 2. Transmitting multiple voice streams from a voice-conferencing server to a client PC to be mixed and played on the PC is feasible. 3. There are two classes of voice vendors in the market: - Large traditional phone equipment vendors pursuing integration of PSTN with Internet, and Small Internet startups.The key to selecting a vendor will be to find a company sufficiently large and established to provide a base voice-conferencing software product line for the next several years.

  17. GNF2 Operating Experience

    SciTech Connect

    Schardt, John

    2007-07-01

    GNF's latest generation fuel product, GNF2, is designed to deliver improved nuclear efficiency, higher bundle and cycle energy capability, and more operational flexibility. But along with high performance, our customers face a growing need for absolute fuel reliability. This is driven by a general sense in the industry that LWR fuel reliability has plateaued. Too many plants are operating with fuel leakers, and the impact on plant operations and operator focus is unacceptable. The industry has responded by implementing an INPO-coordinated program aimed at achieving leaker-free reliability by 2010. One focus area of the program is the relationship between fuel performance (i.e., duty) and reliability. The industry recognizes that the right balance between performance and problem-free fuel reliability is critical. In the development of GNF2, GNF understood the requirement for a balanced solution and utilized a product development and introduction strategy that specifically addressed reliability: evolutionary design features supported by an extensive experience base; thoroughly tested components; and defense-in-depth mitigation of all identified failure mechanisms. The final proof test that the balance has been achieved is the application of the design, initially through lead use assemblies (LUAs), in a variety of plants that reflect the diversity of the BWR fleet. Regular detailed surveillance of these bundles provides the verification that the proper balance between performance and reliability has been achieved. GNF currently has GNF2 lead use assemblies operating in five plants. Included are plants that have implemented extended power up-rates, plants on one and two-year operating cycles, and plants with and without NobleChem{sup TM} and zinc injection. The leading plant has undergone three pool-side inspections outages to date. This paper reviews the actions taken to insure GNF2's reliability, and the lead use assembly surveillance data accumulated to date to

  18. The operator's emotional stability

    NASA Technical Reports Server (NTRS)

    Zilberman, P. B.

    1975-01-01

    An attempt is made to provide a psychological interpretation of the concept of emotional stability in connection with other psychics qualities of an operator's personality. Emotional stability is understood as a person's capacity to control his emotional state for the purpose of maintaining the necessary level of work performance under extreme stress conditions. By modeling the operator's sensorimotor activity and by comparing the productivity indicators under ordinary conditions with those obtained during work involving an emotional load, the level of emotional stability can be determined.

  19. Precision Nova operations

    SciTech Connect

    Ehrlich, R.B.; Miller, J.L.; Saunders, R.L.; Thompson, C.E.; Weiland, T.L.; Laumann, C.W.

    1995-09-01

    To improve the symmetry of x-ray drive on indirectly driven ICF capsules, we have increased the accuracy of operating procedures and diagnostics on the Nova laser. Precision Nova operations includes routine precision power balance to within 10% rms in the ``foot`` and 5% nns in the peak of shaped pulses, beam synchronization to within 10 ps rms, and pointing of the beams onto targets to within 35 {mu}m rms. We have also added a ``fail-safe chirp`` system to avoid Stimulated Brillouin Scattering (SBS) in optical components during high energy shots.

  20. A VIRTUAL OPERATING SYSTEM

    SciTech Connect

    Hall, Dennis E.; Scherrer, Deborah K.; Sventek, Joseph S.

    1980-05-01

    Significant progress toward disentangling computing environments from their under lying operating systern has been made. An approach is presented that achieves inter-system uniformity at all three levels of user interface - virtual machine, utilities, and command language. Under specifiable conditions, complete uniformity is achievable without disturbing the underlying operating system. The approach permits accurate computation of the cost to move both people and software to a new system. The cost of moving people is zero, and the cost of moving software is equal to the cost of implementing a virtual machine. Efficiency is achieved through optimization of the primitive functions.

  1. Operative management of appendicitis.

    PubMed

    St Peter, Shawn D; Snyder, Charles L

    2016-08-01

    Appendectomy has been the standard of care for appendicitis since the late 1800s, and remains one of the most common operations performed in children. The advent of data-driven medicine has led to questions about every aspect of the operation-whether appendectomy is even necessary, when it should be performed (timing), how the procedure is done (laparoscopic variants versus open and irrigation versus no irrigation), length of hospital stay, and antibiotic duration. The goal of this analysis is to review the current status of, and available data regarding, the surgical management of appendicitis in children. PMID:27521710

  2. Shuttle operational expectations

    NASA Technical Reports Server (NTRS)

    Abrahamson, J. A.

    1982-01-01

    The results of orbital flight tests (OFT) of the Space Shuttle are reviewed, and modifications planned for upcoming operational flights are discussed. The performance of the solid rocket boosters, external tank, main engines, structural system, propulsion system, reaction control system, electric power system, heat rejection system, hydraulic system, avionics, and other systems is described and evaluated as generally highly satisfactory. Payload servicing and deployment were also successfully demonstrated by OFT. Additional facilities planned for the operational flights are briefly described, and improvements that will make the Challenger spacecraft lighter than Columbia, provide it with more thrust, and give it a larger payload are summarized. Some software modifications being introduced are also mentioned.

  3. Precision Nova operations

    NASA Astrophysics Data System (ADS)

    Ehrlich, Robert B.; Miller, John L.; Saunders, Rodney L.; Thompson, Calvin E.; Weiland, Timothy L.; Laumann, Curt W.

    1995-12-01

    To improve the symmetry of x-ray drive on indirectly driven ICF capsules, we have increased the accuracy of operating procedures and diagnostics on the Nova laser. Precision Nova operations include routine precision power balance to within 10% rms in the 'foot' and 5% rms in the peak of shaped pulses, beam synchronization to within 10 ps rms, and pointing of the beams onto targets to within 35 micrometer rms. We have also added a 'fail-safe chirp' system to avoid stimulated Brillouin scattering (SBS) in optical components during high energy shots.

  4. Alkaline battery operational methodology

    DOEpatents

    Sholklapper, Tal; Gallaway, Joshua; Steingart, Daniel; Ingale, Nilesh; Nyce, Michael

    2016-08-16

    Methods of using specific operational charge and discharge parameters to extend the life of alkaline batteries are disclosed. The methods can be used with any commercial primary or secondary alkaline battery, as well as with newer alkaline battery designs, including batteries with flowing electrolyte. The methods include cycling batteries within a narrow operating voltage window, with minimum and maximum cut-off voltages that are set based on battery characteristics and environmental conditions. The narrow voltage window decreases available capacity but allows the batteries to be cycled for hundreds or thousands of times.

  5. Intracranial surgical operative apparatus

    NASA Technical Reports Server (NTRS)

    Sheldon, Charles H. (Inventor); Frazer, Robert E. (Inventor); Lutes, Harold R. (Inventor)

    1983-01-01

    Apparatus for operating on the brain with minimal disturbances thereto, including a bullet-shaped expandable device with an end that can be closed for insertion through a small hole in the brain. The device can be expanded after insertion to leave an air pocket through which to extend viewing and cutting devices which enable operation on tumors or the like that lie at the end of the expanded device. A set of probes of varying diameters are also provided, to progressively enlarge a passage leading to the tumor, prior to inserting the expandable device.

  6. Analysis of operator participation

    NASA Technical Reports Server (NTRS)

    Zarakovskiy, G. M.; Zinchenko, V. P.

    1973-01-01

    The problem of providing a psychological conception of the analysis of operator participation in a form that will allow the qualitative approach to be combined with the quantitative approach is examined. This conception is based on an understanding of the essence of human endeavor in automated control systems that now determine the development of society's productive forces and that are the main object of ergonomic research. Two main types of operator participation were examined; information retrieval with immediate service and information retrieval with delayed service.

  7. BETA GAUGE OPERATION MANUAL

    EPA Science Inventory

    This manual provides description and operating instructions for a redesigned Beta Gauge for measuring particles from vehicle exhaust. The improvements and a new control system including a control unit which is radically different from the prior unit, are described. Complete Beta ...

  8. Fast Fuzzy Arithmetic Operations

    NASA Technical Reports Server (NTRS)

    Hampton, Michael; Kosheleva, Olga

    1997-01-01

    In engineering applications of fuzzy logic, the main goal is not to simulate the way the experts really think, but to come up with a good engineering solution that would (ideally) be better than the expert's control, In such applications, it makes perfect sense to restrict ourselves to simplified approximate expressions for membership functions. If we need to perform arithmetic operations with the resulting fuzzy numbers, then we can use simple and fast algorithms that are known for operations with simple membership functions. In other applications, especially the ones that are related to humanities, simulating experts is one of the main goals. In such applications, we must use membership functions that capture every nuance of the expert's opinion; these functions are therefore complicated, and fuzzy arithmetic operations with the corresponding fuzzy numbers become a computational problem. In this paper, we design a new algorithm for performing such operations. This algorithm is applicable in the case when negative logarithms - log(u(x)) of membership functions u(x) are convex, and reduces computation time from O(n(exp 2))to O(n log(n)) (where n is the number of points x at which we know the membership functions u(x)).

  9. Media Center: Operations Handbook.

    ERIC Educational Resources Information Center

    Dependents Schools (DOD), Washington, DC.

    This guide to basic technical procedures recommended in the operation of within-school media centers is intended for all Department of Defense Dependent Schools (DoDDS) media specialists, clerks, aides, and technicians. The first four sections refer to the general media program functions identified in the related manual, "A is for Apple:…

  10. Operation Rescue. Final Report.

    ERIC Educational Resources Information Center

    McKee, Neena; Crawford, Georgette

    The Operation Rescue project was designed to develop a classroom setting for the delivery of comprehensive educational services to "at risk" young adolescents. The classroom was established as part of the pre-existing Jonesboro Alternative School, and it utilized the basic academic and social program developed by this entity over 12 years of work…