Science.gov

Sample records for database die oesterreichische

  1. Results from prototype die-to-database reticle inspection system

    NASA Astrophysics Data System (ADS)

    Mu, Bo; Dayal, Aditya; Broadbent, Bill; Lim, Phillip; Goonesekera, Arosha; Chen, Chunlin; Yeung, Kevin; Pinto, Becky

    2009-03-01

    A prototype die-to-database high-resolution reticle defect inspection system has been developed for 32nm and below logic reticles, and 4X Half Pitch (HP) production and 3X HP development memory reticles. These nodes will use predominantly 193nm immersion lithography (with some layers double patterned), although EUV may also be used. Many different reticle types may be used for these generations including: binary (COG, EAPSM), simple tritone, complex tritone, high transmission, dark field alternating (APSM), mask enhancer, CPL, and EUV. Finally, aggressive model based OPC is typically used, which includes many small structures such as jogs, serifs, and SRAF (sub-resolution assist features), accompanied by very small gaps between adjacent structures. The architecture and performance of the prototype inspection system is described. This system is designed to inspect the aforementioned reticle types in die-todatabase mode. Die-to-database inspection results are shown on standard programmed defect test reticles, as well as advanced 32nm logic, and 4X HP and 3X HP memory reticles from industry sources. Direct comparisons with currentgeneration inspection systems show measurable sensitivity improvement and a reduction in false detections.

  2. High resolution inspection with wafer plane die: database defect detection

    NASA Astrophysics Data System (ADS)

    Hess, Carl; Wihl, Mark; Shi, Rui-fang; Xiong, Yalin; Pang, Song

    2008-10-01

    High Resolution reticle inspection is well-established as a proven, effective, and efficient means of detecting yieldlimiting mask defects as well as defects which are not immediately yield-limiting yet can enable manufacturing process improvements. Historically, RAPID products have enabled detection of both classes of these defects. The newlydeveloped Wafer Plane Inspection (WPI) detector technology meets the needs of some advanced mask manufacturers to identify the lithographically-significant defects while ignoring the other non-lithographically-significant defects. Wafer Plane Inspection accomplishes this goal by performing defect detection based on a modeled image of how the mask features would actually print in the photoresist. This has the effect of reducing sensitivity to non-printing defects while enabling higher sensitivity focused in high MEEF areas where small reticle defects still yield significant printing defects on wafers. This approach has several important features. The ability to ignore non-printing defects and to apply additional effective sensitivity in high MEEF areas enables advanced node development. In addition, the modeling allows the inclusion of important polarization effects that occur in the resist for high NA operation. This allows for the results to better match wafer print results compared to alternate approaches. Finally, the simulation easily allows for the application of arbitrary illumination profiles. With this approach, users of WPI can make use of unique or custom scanner illumination profiles. This allows the more precise modeling of profiles without inspection system hardware modification or loss of company intellectual property. A previous paper [1] introduced WPI in D:D mode. This paper examines the operation and results for WPI in Die:Database mode.

  3. Results from a new die-to-database reticle inspection platform

    NASA Astrophysics Data System (ADS)

    Broadbent, William; Xiong, Yalin; Giusti, Michael; Walsh, Robert; Dayal, Aditya

    2007-03-01

    A new die-to-database high-resolution reticle defect inspection system has been developed for the 45nm logic node and extendable to the 32nm node (also the comparable memory nodes). These nodes will use predominantly 193nm immersion lithography although EUV may also be used. According to recent surveys, the predominant reticle types for the 45nm node are 6% simple tri-tone and COG. Other advanced reticle types may also be used for these nodes including: dark field alternating, Mask Enhancer, complex tri-tone, high transmission, CPL, EUV, etc. Finally, aggressive model based OPC will typically be used which will include many small structures such as jogs, serifs, and SRAF (sub-resolution assist features) with accompanying very small gaps between adjacent structures. The current generation of inspection systems is inadequate to meet these requirements. The architecture and performance of a new die-to-database inspection system is described. This new system is designed to inspect the aforementioned reticle types in die-to-database and die-to-die modes. Recent results from internal testing of the prototype systems are shown. The results include standard programmed defect test reticles and advanced 45nm and 32nm node reticles from industry sources. The results show high sensitivity and low false detections being achieved.

  4. Energy Flux Method for Die-to-Database Inspection of Critical Layer Reticles

    NASA Astrophysics Data System (ADS)

    Garcia, Hector I.; Volk, William W.; Xiong, Yalin; Watson, Sterling G.; Yu, Zongchang; Guo, Zhian; Wang, Lantian

    2002-12-01

    With growing implementation of low k1 lithography on DUV scanners for wafer production, detecting and analyzing photomask critical dimension (CD) errors and semitransparent defects is vital for qualifying photomasks to enable high IC wafer yields for 130nm and 100nm nodes. Using the TeraStar pattern inspection system's image computer platform, a new die-to-database algorithm, TeraFlux, has been implemented and tested for the inspection of small "closed" features. The algorithm is run in die-to-database mode comparing the energy flux difference between reticle and the database reference for small closed features, such as, contacts, trenches, and cells on chrome and half-tone reticles. The algorithm is applicable to both clear and dark field reticles. Tests show the new algorithm provides CD error detection to 6% energy flux variation with low false defect counts. We have characterized the sensitivity and false defect performance of the die-to-database energy flux algorithm with production masks and programmed defect test masks. A sampling of inspection results will be presented. Wafer printability results using the programmed defects on a programmed defect test reticle will be presented and compared to the inspection defect sensitivity results.

  5. Results from a new 193nm die-to-database reticle inspection platform

    NASA Astrophysics Data System (ADS)

    Broadbent, William H.; Alles, David S.; Giusti, Michael T.; Kvamme, Damon F.; Shi, Rui-fang; Sousa, Weston L.; Walsh, Robert; Xiong, Yalin

    2010-05-01

    A new 193nm wavelength high resolution reticle defect inspection platform has been developed for both die-to-database and die-to-die inspection modes. In its initial configuration, this innovative platform has been designed to meet the reticle qualification requirements of the IC industry for the 22nm logic and 3xhp memory generations (and shrinks) with planned extensions to the next generation. The 22nm/3xhp IC generation includes advanced 193nm optical lithography using conventional RET, advanced computational lithography, and double patterning. Further, EUV pilot line lithography is beginning. This advanced 193nm inspection platform has world-class performance and the capability to meet these diverse needs in optical and EUV lithography. The architecture of the new 193nm inspection platform is described. Die-to-database inspection results are shown on a variety of reticles from industry sources; these reticles include standard programmed defect test reticles, as well as advanced optical and EUV product and product-like reticles. Results show high sensitivity and low false and nuisance detections on complex optical reticle designs and small feature size EUV reticles. A direct comparison with the existing industry standard 257nm wavelength inspection system shows measurable sensitivity improvement for small feature sizes

  6. Field results from a new die-to-database reticle inspection platform

    NASA Astrophysics Data System (ADS)

    Broadbent, William; Yokoyama, Ichiro; Yu, Paul; Seki, Kazunori; Nomura, Ryohei; Schmalfuss, Heiko; Heumann, Jan; Sier, Jean-Paul

    2007-05-01

    A new die-to-database high-resolution reticle defect inspection platform, TeraScanHR, has been developed for advanced production use with the 45nm logic node, and extendable for development use with the 32nm node (also the comparable memory nodes). These nodes will use predominantly ArF immersion lithography although EUV may also be used. According to recent surveys, the predominant reticle types for the 45nm node are 6% simple tri-tone and COG. Other advanced reticle types may also be used for these nodes including: dark field alternating, Mask Enhancer, complex tri-tone, high transmission, CPL, etc. Finally, aggressive model based OPC will typically be used which will include many small structures such as jogs, serifs, and SRAF (sub-resolution assist features) with accompanying very small gaps between adjacent structures. The current generation of inspection systems is inadequate to meet these requirements. The architecture and performance of the new TeraScanHR reticle inspection platform is described. This new platform is designed to inspect the aforementioned reticle types in die-to-database and die-to-die modes using both transmitted and reflected illumination. Recent results from field testing at two of the three beta sites are shown (Toppan Printing in Japan and the Advanced Mask Technology Center in Germany). The results include applicable programmed defect test reticles and advanced 45nm product reticles (also comparable memory reticles). The results show high sensitivity and low false detections being achieved. The platform can also be configured for the current 65nm, 90nm, and 130nm nodes.

  7. Direct die-to-database electron-beam inspection of fused silica imprint templates

    NASA Astrophysics Data System (ADS)

    Tsuneoka, M.; Hasebe, T.; Tokumoto, T.; Yan, C.; Yamamoto, M.; Resnick, D. J.; Thompson, E.; Wakamori, H.; Inoue, M.; Ainley, Eric; Nordquist, Kevin J.; Dauksher, William J.

    2006-10-01

    Imprint lithography has been included on the ITRS Lithography Roadmap at the 32 and 22 nm nodes. Step and Flash Imprint Lithography (S-FIL TM) is a unique method for printing sub-100 nm geometries. Relative to other imprinting processes S-FIL has the advantage that the template is transparent, thereby facilitating conventional overlay techniques. Further, S-FIL provides sub-100 nm feature resolution without the significant expense of multi-element, high quality projection optics or advanced illumination sources. However, since the technology is 1X, it is critical to address the infrastructure associated with the fabrication of templates. With respect to inspection, although defects as small as 70 nm have been detected using optical techniques, it is clear that it will be necessary to take advantage of the resolution capabilities of electron beam inspection techniques. The challenge is in inspecting templates composed purely of fused silica. This paper reports the inspection of both fused silica wafers and plates. The die-to-database inspection of the wafers was performed on an NGR2100 inspection system. Fused silica plates were inspected using an NGR4000 system. Three different experiments were performed. In the first study, Metal 1 and Logic patterns as small as 40 nm were patterned on a 200 mm fused silica wafer. The patterns were inspected using an NGR2100 die-to-database inspection system. In the second experiment, a 6025 fused silica plate was employed. Patterns with a limited field of view (FOV) were inspected using an NGR4000 reticle-based system. To test the tool's capability for larger FOVs, 16 × 16 μm areas on a MoSi half tone plate were scanned and stitched together to evaluate the tool's ability to reliably do die-to-database comparisons across larger inspection areas.

  8. Net tracing and classification analysis on E-beam die-to-database inspection

    NASA Astrophysics Data System (ADS)

    Gao, Weihong; Zeng, Xuefeng; Lin, Peter; Pan, Yan; Song, Ho Young; Nguyen, Hoang; Cai, Na; Chen, Zhijin; Zafar, Khurram

    2016-03-01

    A novel classification methodology is constructed for Electron Beam (E-Beam) die-to-database (D2DB) inspection results on contact and via layers. It is a design guided defects classification flow that helps to pin-point true defects from a large amount of false alarm defects. Die-to-database E-beam inspection has remarkable features that can help find systematic defects such as Damaged Via and Missing Via; which will be reported as DVC (Dark Voltage Contrast) defects. However, the D2DB result usually reports millions of defects that lie on both `active via' and `floating via', the former being defects-of-interest (DOI), and the latter being of little significance. The indiscriminant mixture of DOI (on active vias) and nuisance (on floating vias) is a challenge in the use of D2DB for finding systematic via defects. We overcome this challenge by overlaying the E-beam defect location onto the design layout file (GDS or OASIS) and tracing the path of the via to determine whether or not it connects to the active or diffusion layer. Our proposed flow uses Net Tracing Classification (NTC) feature in Anchor Hotspot Solution (AHS) to classify all the reported DVC defects into different groups, according to the electrical connectivity of the contact. This classification involves multiple interconnected process layers. All the reported DVC defects will be classified into three groups: (1) Real DVC defects, in which the net traces down to active layer; (2) False DVC type 1, in which the net traces down to gate (which is always dark); (3) False DVC type 2, in which the net traces down to floating metal (which is always dark as well). This enhanced defect classification is greatly helpful in separating real DVC contact/via defects from false alarms. It has a secondary benefit of reducing the total number of defects, which is helpful for subsequent in-depth data analysis. In addition, the verified real DVC locations can be used to generate care areas for E-Beam die-to-die (D2D

  9. Defect inspection for imprint lithography using a die-to-database electron beam verification system

    NASA Astrophysics Data System (ADS)

    Myron, L. Jeff; Thompson, Ecron; McMackin, Ian; Resnick, Douglas J.; Kitamura, Tadashi; Hasebe, Toshiaki; Nakazawa, Shinichi; Tokumoto, Toshifumi; Ainley, Eric; Nordquist, Kevin; Dauksher, William J.

    2006-03-01

    Imprint lithography has been included on the ITRS Lithography Roadmap at the 32 and 22 nm nodes. Step and Flash Imprint Lithography (S-FIL TM) is a unique method for printing sub-100nm geometries. Relative to other imprinting processes S-FIL has the advantage that the template is transparent, thereby facilitating conventional overlay techniques. Further, S-FIL provides sub-100nm feature resolution without the significant expense of multielement, high quality projection optics or advanced illumination sources. However, since the technology is 1X, it is critical to address the infrastructure associated with the fabrication of templates. With respect to inspection, although defects as small as 70nm have been detected using optical techniques, it is clear that it will be necessary to take advantage of the resolution capabilities of electron beam inspection techniques. This paper reports the first systematic study of die-to-database electron beam inspection of patterns that were imprinted using an Imprio 250 system. The die-to-database inspection of the wafers was performed on an NGR2100 inspection system. Ultimately, the most desirable solution is to directly inspect the fused silica template. This paper also reports the results on the first initial experiments of direct inspection fused silica substrates at data rates of 200 MHz. Three different experiments were performed. In the first study, large (350-400nm) Metal 1 and contact features were imprinted and inspected as described above. Using a 12 nm pixel address grid, 24 nm defects were readily detected. The second experiment examined imprinted Metal 1 and Logic patterns with dimensions as small as 70nm. Using a pixel address of 3nm, and a defect threshold of 20 nm, a systematic study of the patterned arrays identified problem areas in the design of the pattern layout. Finally, initial inspection of 200mm fused silica patterned substrates has established proof of concept for direct inspection of imprint templates.

  10. SPHERICAL DIE

    DOEpatents

    Livingston, J.P.

    1959-01-27

    A die is presented for pressing powdered materials into a hemispherical shape of uniforin density and wall thickness comprising a fcmale and male die element held in a stationary spaced relation with the space being equivalent to the wall thickness and defining the hemispherical shape, a pressing ring linearly moveable along the male die element, an inlet to fill the space with powdered materials, a guiding system for moving the pressing ring along the male die element so as to press the powdered material and a heating system for heating the male element so that the powdered material is heated while being pressed.

  11. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C. Y.; Wallace, J. F.

    1981-01-01

    This investigation determined whether selected ion beam sputtered coatings on H-13 die steel would have the potential of improving the thermal fatigue behavior of the steel used as a die in aluminum die casting. The coatings were selected to test candidate insulators and metals capable of providing protection of the die surface. The studies indicate that 1 micrometer thick W and Pt coatings reduced the thermal fatigue more than any other coating tested and are candidates to be used on a die surface to increase die life.

  12. Wege in die Zukunft

    NASA Astrophysics Data System (ADS)

    Kauermann, Göran; Mosler, Karl

    Die Zukunft stellt große Herausforderungen an die Arbeit der Deutschen Statistischen Gesellschaft. Sie betreffen die gestiegenen Anforderungen der Nutzer von Statistik, die Kommunikationsmöglichkeiten des Internets sowie die Dynamik der statistischen Wissenschaften und ihrer Anwendungsgebiete. Das Kapitel 5 beschreibt, wie sich die Gesellschaft diesen Herausforderungen stellt und welche Ziele sie sich in der wissenschaftlichen Zusammenarbeit und im Kampf gegen das Innumeratentum gesetzt hat.

  13. Die drool and die drool theory

    NASA Astrophysics Data System (ADS)

    Schmalzer, A. M.; Giacomin, A. Jeffrey

    2013-04-01

    When molten plastic is extruded from a die, it sometimes collects on the open face of the die. Known as die drool, this phenomenon costs plastics manufacturers by requiring die cleaning. This has been attributed to many causes, but none of these has led to an equation for the drool rate. In this work we provide an exact analytical solution for the drool rate, and we base this solution on a postulate of a cohesive slip layer near the die walls. We thus attribute die drool to cohesive failure within the fluid at an internal surface where the fluid slips on itself. We adimensionalize the drool rate with the production rate, and call this the build up ratio, BR. We provide an exact analytical solution for BR when the cohesive slip layer either sticks at the wall. We examine the slit geometry corresponding to sheet or film extrusion.

  14. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1984-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  15. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1982-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  16. Packaged die heater

    SciTech Connect

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

  17. HIGH PRESSURE DIES

    DOEpatents

    Wilson, W.B.

    1960-05-31

    A press was invented for subjecting specimens of bismuth, urania, yttria, or thoria to high pressures and temperatures. The press comprises die parts enclosing a space in which is placed an electric heater thermally insulated from the die parts so as not to damage them by heat. The die parts comprise two opposed inner frustoconical parts and an outer part having a double frustoconical recess receiving the inner parts. The die space decreases in size as the inner die parts move toward one another against the outer part and the inner parts, though very hard, do not fracture because of the mode of support provided by the outer part.

  18. Die singulation method

    SciTech Connect

    Swiler, Thomas P; Garcia, Ernest J; Francis, Kathryn M

    2014-01-07

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  19. Die singulation method

    SciTech Connect

    Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

    2013-06-11

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  20. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-04-26

    A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

  1. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the opportunity to close important…

  2. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  3. Die Soldering in Aluminium Die Casting

    SciTech Connect

    Han, Q.; Kenik, E.A.; Viswanathan, S.

    2000-03-15

    Two types of tests, dipping tests and dip-coating tests were carried out on small steel cylinders using pure aluminum and 380 alloy to investigate the mechanism of die soldering during aluminum die casting. Optical and scanning electron microscopy were used to study the morphology and composition of the phases formed during soldering. A soldering mechanism is postulated based on experimental observations. A soldering critical temperature is postulated at which iron begins to react with aluminum to form an aluminum-rich liquid phase and solid intermetallic compounds. When the temperature at the die surface is higher than this critical temperature, the aluminum-rich phase is liquid and joins the die with the casting during the subsequent solidification. The paper discusses the mechanism of soldering for the case of pure aluminum and 380 alloy casting in a steel mold, the factors that promote soldering, and the strength of the bond formed when soldering occurs. conditions, an aluminum-rich soldering layer may also form over the intermetallic layer. Although a significant amount of research has been conducted on the nature of these intermetallics, little is known about the conditions under which soldering occurs.

  4. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  5. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

  6. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  7. Biofuel Database

    National Institute of Standards and Technology Data Gateway

    Biofuel Database (Web, free access)   This database brings together structural, biological, and thermodynamic data for enzymes that are either in current use or are being considered for use in the production of biofuels.

  8. Electronic Databases.

    ERIC Educational Resources Information Center

    Williams, Martha E.

    1985-01-01

    Presents examples of bibliographic, full-text, and numeric databases. Also discusses how to access these databases online, aids to online retrieval, and several issues and trends (including copyright and downloading, transborder data flow, use of optical disc/videodisc technology, and changing roles in database generation and processing). (JN)

  9. Database Administrator

    ERIC Educational Resources Information Center

    Moore, Pam

    2010-01-01

    The Internet and electronic commerce (e-commerce) generate lots of data. Data must be stored, organized, and managed. Database administrators, or DBAs, work with database software to find ways to do this. They identify user needs, set up computer databases, and test systems. They ensure that systems perform as they should and add people to the…

  10. Die zwei Kulturen

    NASA Astrophysics Data System (ADS)

    Ankolekar, Anupriya; Krötzsch, Markus; Tran, Than; Vrandecic, Denny

    Oft werden zwei mögliche Entwicklungen des Webs diskutiert - das Web 2.0 und das Semantic Web. Wenn wir diese zwei Visionen für das zukünftige Web unter die Lupe nehmen, dann lässt sich feststellen, dass sich die Ideen in ihrem Kern und ihren Technologien gegenseitig ergänzen. Dementsprechend können und sollen beide Visionen von den Erfahrungen und Stärken der anderen profitieren. Wir glauben daran, dass zukünftige Webanwendungen den Web 2.0-Fokus auf Community und Benutzerfreundlichkeit beibehalten und, darüber hinaus, auch von Technologien des Semantic Web zur Vereinfachung der mashupähnlichen Datenintegration profitieren werden. Auf Basis eines Semantic Blog-Szenarios werden wir hier die Vorteile einer möglichen Kombination von Semantic Web und Web 2.0 illustrieren, die zeitnah realisiert werden kann. Wir werden auch auf technische Probleme eingehen, die bei der Erweiterung dieses Szenarios entstehen. Wir stellen dar, wie aktuelle Entwicklungen in der Semantic Web Forschung diese Probleme angehen können, und setzen zugleich auch Schwerpunkte für die zukünftige Forschung, die in diesem Zusammenhang relevant sind.

  11. Die Zeitung der Zukunft

    NASA Astrophysics Data System (ADS)

    Wieser, Christoph; Schaffert, Sebastian

    Schon lange wird spekuliert, wie wir in Zukunft Zeitung lesen werden. Werden wir am Frühstückstisch wie gewohnt in einer Zeitung aus Papier schmökern oder werden wir die Zeitung als biegsame Folie beschrieben mit elektronischer Tinte in Händen halten? Wird die Zeitung mit anderen Medien wie Radio und Fernsehen verschmelzen? Viele Varianten sind denkbar. Heute lässt sich schon ein Trend ablesen: Immer mehr Leser entdecken die Online-Zeitung als Informationsmedium, eine Voraussetzung für die Nutzung neuer Technologien in der Zeitung der Zukunft. In diesem Kapitel stellen wir Entwicklungsmöglichkeiten der Online-Zeitung dar, wie sie im Social Semantic Web möglich werden.

  12. When Somebody Dies

    MedlinePlus

    ... alguien muere All living things — including bugs and fish and people — die. It's difficult, even for grownups, ... kind of death for families and friends to deal with because it happens so fast. There is ...

  13. Statistical databases

    SciTech Connect

    Kogalovskii, M.R.

    1995-03-01

    This paper presents a review of problems related to statistical database systems, which are wide-spread in various fields of activity. Statistical databases (SDB) are referred to as databases that consist of data and are used for statistical analysis. Topics under consideration are: SDB peculiarities, properties of data models adequate for SDB requirements, metadata functions, null-value problems, SDB compromise protection problems, stored data compression techniques, and statistical data representation means. Also examined is whether the present Database Management Systems (DBMS) satisfy the SDB requirements. Some actual research directions in SDB systems are considered.

  14. Database Manager

    ERIC Educational Resources Information Center

    Martin, Andrew

    2010-01-01

    It is normal practice today for organizations to store large quantities of records of related information as computer-based files or databases. Purposeful information is retrieved by performing queries on the data sets. The purpose of DATABASE MANAGER is to communicate to students the method by which the computer performs these queries. This…

  15. Maize databases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This chapter is a succinct overview of maize data held in the species-specific database MaizeGDB (the Maize Genomics and Genetics Database), and selected multi-species data repositories, such as Gramene/Ensembl Plants, Phytozome, UniProt and the National Center for Biotechnology Information (NCBI), ...

  16. Issues with dying patients.

    PubMed

    Valent, P

    1978-04-22

    Doctors have the privilege of looking after patients from the moment of birth to the moment of death. Yet, the holistic approach to patients is interfered with by the doctor's role as a warrior against death, where death's everpresent claim on our lives, and its final victory, are ignored. This paper attempts to explore why doctors are in their current position, the mechanisms for ignoring death which are shared by doctors and patients, the nature of the fear of death, and practical implications for the treatment of dying patients. More and more patients die now in medical settings. It is incumbent on doctors to understand the dying process, if much unnecessary suffering is to be prevented. PMID:661717

  17. Genome databases

    SciTech Connect

    Courteau, J.

    1991-10-11

    Since the Genome Project began several years ago, a plethora of databases have been developed or are in the works. They range from the massive Genome Data Base at Johns Hopkins University, the central repository of all gene mapping information, to small databases focusing on single chromosomes or organisms. Some are publicly available, others are essentially private electronic lab notebooks. Still others limit access to a consortium of researchers working on, say, a single human chromosome. An increasing number incorporate sophisticated search and analytical software, while others operate as little more than data lists. In consultation with numerous experts in the field, a list has been compiled of some key genome-related databases. The list was not limited to map and sequence databases but also included the tools investigators use to interpret and elucidate genetic data, such as protein sequence and protein structure databases. Because a major goal of the Genome Project is to map and sequence the genomes of several experimental animals, including E. coli, yeast, fruit fly, nematode, and mouse, the available databases for those organisms are listed as well. The author also includes several databases that are still under development - including some ambitious efforts that go beyond data compilation to create what are being called electronic research communities, enabling many users, rather than just one or a few curators, to add or edit the data and tag it as raw or confirmed.

  18. Experiences of the dying.

    PubMed

    Schoenbeck, Susan L

    2011-01-01

    It is often a mystery to us how we have come to know and believe in certain things. Beliefs are like guests who come up to a door. They come in only if the host opens it and invites them in. Otherwise they are turned away, unable to enter. LPNs/LVNs are invited to reflect on their experiences and expand their knowledge and beliefs. There is growing recognition that bedside talks of the dying, spirit travel and near-death events are real events for the people who experience them. LPNs/ LVNs are encouraged to expand their knowledge and beliefs about dying. PMID:23252027

  19. Assisted Dying in Canada.

    PubMed

    Schuklenk, Udo

    2014-01-01

    This paper makes an affirmative ethical case in favour of the decriminalization of assisted dying in Canada. It then proceeds to defending the affirmative case against various slippery-slope arguments that are typically deployed by opponents of assisted dying. Finally, a recent case of questionable professional conduct by anti-euthanasia campaigners cum academics is flagged as a warning to all of us not to permit the quality of the professional debate to deteriorate unacceptably, despite the personal emotional investments involved on all sides of the debate. PMID:26871530

  20. BIOMARKERS DATABASE

    EPA Science Inventory

    This database was developed by assembling and evaluating the literature relevant to human biomarkers. It catalogues and evaluates the usefulness of biomarkers of exposure, susceptibility and effect which may be relevant for a longitudinal cohort study. In addition to describing ...

  1. Poetry and the Dying.

    ERIC Educational Resources Information Center

    Kramer, Aaron

    1992-01-01

    Demonstrates roles poetry can play as people confront the death of loved ones and their own dying. Gives examples of Heinrich Heine transforming his agony into art and, from the poetry of two college students, both in advanced stages of neurological disease, which was read aloud in class, teaching all present something about how to approach their…

  2. Tool & Die Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 23 units to consider for use in a tech prep competency profile for the occupation of tool and die technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

  3. When a Baby Dies.

    ERIC Educational Resources Information Center

    Church, Martha Jo; And Others

    Written especially for grieving mothers whose babies have died, this booklet offers an overview of stages and experiences through which bereaved parents commonly pass. Specifically, the text is intended to give comfort to bereaved parents, offer insight into the grieving process, and provide thoughts on leave-taking ceremonies. The first section…

  4. Navigating "Assisted Dying".

    PubMed

    Schipper, Harvey

    2016-02-01

    Carter is a bellwether decision, an adjudication on a narrow point of law whose implications are vast across society, and whose impact may not be realized for years. Coupled with Quebec's Act Respecting End-of-life Care it has sharply changed the legal landscape with respect to actively ending a person's life. "Medically assisted dying" will be permitted under circumstances, and through processes, which have yet to be operationally defined. This decision carries with it moral assumptions, which mean that it will be difficult to reach a unifying consensus. For some, the decision and Act reflect a modern acknowledgement of individual autonomy. For others, allowing such acts is morally unspeakable. Having opened the Pandora's Box, the question becomes one of navigating a tolerable societal path. I believe it is possible to achieve a workable solution based on the core principle that "medically assisted dying" should be a very rarely employed last option, subject to transparent ongoing review, specifically as to why it was deemed necessary. My analysis is based on 1. The societal conditions in which have fostered demand for "assisted dying", 2. Actions in other jurisdictions, 3. Carter and Quebec Bill 52, 4. Political considerations, 5. Current medical practice. Leading to a series of recommendations regarding. 1. Legislation and regulation, 2. The role of professional regulatory agencies, 3. Medical professions education and practice, 4. Public education, 5. Health care delivery and palliative care. Given the burden of public opinion, and the legal steps already taken, a process for assisted-dying is required. However, those legal and regulatory steps should only be considered a necessary and defensive first step in a two stage process. The larger goal, the second step, is to drive the improvement of care, and thus minimize assisted-dying. PMID:27169205

  5. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  6. Modeling the Mechanical Performance of Die Casting Dies

    SciTech Connect

    R. Allen Miller

    2004-02-27

    The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

  7. Experiment Databases

    NASA Astrophysics Data System (ADS)

    Vanschoren, Joaquin; Blockeel, Hendrik

    Next to running machine learning algorithms based on inductive queries, much can be learned by immediately querying the combined results of many prior studies. Indeed, all around the globe, thousands of machine learning experiments are being executed on a daily basis, generating a constant stream of empirical information on machine learning techniques. While the information contained in these experiments might have many uses beyond their original intent, results are typically described very concisely in papers and discarded afterwards. If we properly store and organize these results in central databases, they can be immediately reused for further analysis, thus boosting future research. In this chapter, we propose the use of experiment databases: databases designed to collect all the necessary details of these experiments, and to intelligently organize them in online repositories to enable fast and thorough analysis of a myriad of collected results. They constitute an additional, queriable source of empirical meta-data based on principled descriptions of algorithm executions, without reimplementing the algorithms in an inductive database. As such, they engender a very dynamic, collaborative approach to experimentation, in which experiments can be freely shared, linked together, and immediately reused by researchers all over the world. They can be set up for personal use, to share results within a lab or to create open, community-wide repositories. Here, we provide a high-level overview of their design, and use an existing experiment database to answer various interesting research questions about machine learning algorithms and to verify a number of recent studies.

  8. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  9. Solubility Database

    National Institute of Standards and Technology Data Gateway

    SRD 106 IUPAC-NIST Solubility Database (Web, free access)   These solubilities are compiled from 18 volumes (Click here for List) of the International Union for Pure and Applied Chemistry(IUPAC)-NIST Solubility Data Series. The database includes liquid-liquid, solid-liquid, and gas-liquid systems. Typical solvents and solutes include water, seawater, heavy water, inorganic compounds, and a variety of organic compounds such as hydrocarbons, halogenated hydrocarbons, alcohols, acids, esters and nitrogen compounds. There are over 67,500 solubility measurements and over 1800 references.

  10. Psychotherapy with Older Dying Persons.

    ERIC Educational Resources Information Center

    Dye, Carol J.

    Psychotherapy with older dying patients can lead to problems of countertransference for the clinician. Working with dying patients requires flexibility to adapt basic therapeutics to the institutional setting. Goals of psychotherapy must be reconceptualized for dying clients. The problems of countertransference arise because clinicians themselves…

  11. Drinking Water Treatability Database (Database)

    EPA Science Inventory

    The drinking Water Treatability Database (TDB) will provide data taken from the literature on the control of contaminants in drinking water, and will be housed on an interactive, publicly-available USEPA web site. It can be used for identifying effective treatment processes, rec...

  12. Nitriding of Aluminum Extrusion Die: Effect of Die Geometry

    NASA Astrophysics Data System (ADS)

    Akhtar, S. S.; Arif, A. F. M.; Yilbas, B. S.

    2010-04-01

    Nitriding of complex-shaped extrusion dies may result in non-uniform nitride layers and hence a required hardness may not be achieved in some regions of the bearing area. The present study is carried out to assess the effect of extrusion die profile on the characteristics and growth behavior of nitride layers so that the critical die design feature can be identified to enhance the uniformity of the nitride layer. For this purpose, AISI H13 steel samples have been manufactured with profiles similar to those of hot extrusion dies. The samples were then gas nitrided under controlled nitriding potential. The uniformity and depth of nitride layers have been investigated in terms of compound layer and total nitride case depth for selected die features. The results of this study indicated the need to include the effect of profile on the nitride layer for the optimal die design with improved service life.

  13. Accurate defect die placement and nuisance defect reduction for reticle die-to-die inspections

    NASA Astrophysics Data System (ADS)

    Wen, Vincent; Huang, L. R.; Lin, C. J.; Tseng, Y. N.; Huang, W. H.; Tuo, Laurent C.; Wylie, Mark; Chen, Ellison; Wang, Elvik; Glasser, Joshua; Kelkar, Amrish; Wu, David

    2015-10-01

    Die-to-die reticle inspections are among the simplest and most sensitive reticle inspections because of the use of an identical-design neighboring-die for the reference image. However, this inspection mode can have two key disadvantages: (1) The location of the defect is indeterminate because it is unclear to the inspector whether the test or reference image is defective; and (2) nuisance and false defects from mask manufacturing noise and tool optical variation can limit the usable sensitivity. The use of a new sequencing approach for a die-to-die inspection can resolve these issues without any additional scan time, without sacrifice in sensitivity requirement, and with a manageable increase in computation load. In this paper we explore another approach for die-to-die inspections using a new method of defect processing and sequencing. Utilizing die-to-die double arbitration during defect detection has been proven through extensive testing to generate accurate placement of the defect in the correct die to ensure efficient defect disposition at the AIMS step. The use of this method maintained the required inspection sensitivity for mask quality as verified with programmed-defectmask qualification and then further validated with production masks comparing the current inspection approach to the new method. Furthermore, this approach can significantly reduce the total number of defects that need to be reviewed by essentially eliminating the nuisance and false defects that can result from a die-to-die inspection. This "double-win" will significantly reduce the effort in classifying a die-to-die inspection result and will lead to improved cycle times.

  14. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  15. Foreigners dying in Istanbul.

    PubMed

    Uzun, Ibrahim; Celbis, Osman; Baydar, Cetin Lutfi; Alkan, Nevzat; Arslan, Murat Nihat

    2009-09-01

    The study included 411 deaths selected from 14,647 medicolegal deaths autopsied in the Morgue Department of Forensic Medicine Institute Directorate, affiliated with the Ministry of Justice, between 1998 and 2002. Data were collected from court documents, coroner's investigation reports, and autopsy reports. The parameters of age, gender, nationality and origin, cause and place of death in foreigners dying in Istanbul were evaluated in the study. Out of 14,647 medicolegal deaths, 3.5% were foreigners from 34 different nationalities. The nationality with the highest rate of foreigner deaths (34%) was Romanian. Out of 411 deaths, 74.3% were male and 25.7% were female. Of all cases, 64.4% were tourists visiting Istanbul and 35.6% had a job in Istanbul. Of 146 foreigners employed in Istanbul, 94.5% did not have a work permit, while only 5.5% had a work permit. PMID:19674242

  16. Stackfile Database

    NASA Technical Reports Server (NTRS)

    deVarvalho, Robert; Desai, Shailen D.; Haines, Bruce J.; Kruizinga, Gerhard L.; Gilmer, Christopher

    2013-01-01

    This software provides storage retrieval and analysis functionality for managing satellite altimetry data. It improves the efficiency and analysis capabilities of existing database software with improved flexibility and documentation. It offers flexibility in the type of data that can be stored. There is efficient retrieval either across the spatial domain or the time domain. Built-in analysis tools are provided for frequently performed altimetry tasks. This software package is used for storing and manipulating satellite measurement data. It was developed with a focus on handling the requirements of repeat-track altimetry missions such as Topex and Jason. It was, however, designed to work with a wide variety of satellite measurement data [e.g., Gravity Recovery And Climate Experiment -- GRACE). The software consists of several command-line tools for importing, retrieving, and analyzing satellite measurement data.

  17. Two Piece Compaction Die Design

    SciTech Connect

    Coffey, Ethan N

    2010-03-01

    Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the

  18. Database Marketplace 2002: The Database Universe.

    ERIC Educational Resources Information Center

    Tenopir, Carol; Baker, Gayle; Robinson, William

    2002-01-01

    Reviews the database industry over the past year, including new companies and services, company closures, popular database formats, popular access methods, and changes in existing products and services. Lists 33 firms and their database services; 33 firms and their database products; and 61 company profiles. (LRW)

  19. Adapt or die?

    PubMed

    Visser, S S; Nel, A H

    1996-12-01

    The worldwide economic recession and the concomitant limited stock of finances have had an influence on the available money of every household and have also inhibited the improvement of socio-economic conditions and medicine. The Reconstruction and Development Programme (RDP) has the objective of improving the living conditions of the people with regard to housing, education, training and health care. The latter seems to be a major problem which has to be addressed with the emphasis on the preventive and promotional aspects of health care. A comprehensive health care system did not come into being property in the past because of the maldistribution of health care services, personnel and differences in culture and health care beliefs and values. The question that now arises, is how to render a quality health care service within the constraints of inadequate financing and resources. A comprehensive literature study has been done with reference to quality health care and financing followed by a survey of existing health services and finances. Recommendations are made about minimum requirements to be accepted if one were to adapt rather than die in terms of the provision of healthcare: the decentralization and rationalization of the administration of health care, the stress on and realization of effective and efficient primary health care, the acceptance of participative management in health providing organizations, the provision of financial management training for health care managers and the application of management accounting principles for the improvement of the efficiency and effectiveness of management. PMID:9283343

  20. Dying and multiplying life.

    PubMed

    Rodríguez-Arias, David

    2014-09-01

    It was only after James P. Lovette's death, in 2006, that I discovered that the twenty-four-year-old colleague and friend with whom I had spent so many afternoons debating issues in organ transplantation had been the first successful child heart transplantee in the world and one of the longest-living survivors of a second transplant. During the years we met, he never even hinted at the fact that three different hearts had beaten in his chest. The revelation that his life had been an almost uninterrupted chain of medical challenges suddenly made me appreciate his quirkiness in a whole new light. Organ transplantation crudely exemplifies a traditional moral dilemma between means and ends: in order to save a life, someone else has to die. Bioethicists involved in this field have the role of identifying the ethical issues surrounding organ donation and helping others to argue in an intelligible and convincing way. In my view, bioethicists have the obligation to foster a discussion as open and transparent as possible on these matters. Still, I sometimes fear that I may be helping to cause unnecessary harms to potential recipients who are desperately waiting for a vital organ. Scholars would be chillingly cold if their quest for truth systematically came at the cost of lives lost. Every life can be meaningful and provide meaning to many others. This is true even with organ recipients, who often have short lives full of considerable suffering. PMID:25231665

  1. What Happens When Someone Dies?

    MedlinePlus

    ... and sleepiness Mental confusion Constipation or incontinence Nausea Refusal to eat or drink Each of these symptoms, ... having a "non-hospital DNR" (see Understanding Health Care Decisions ) if the person is dying at home. ...

  2. REFRACTORY DIE FOR EXTRUDING URANIUM

    DOEpatents

    Creutz, E.C.

    1959-08-11

    A die is presented for the extrusion of metals, said die being formed of a refractory complex oxide having the composition M/sub n/O/sub m/R/sub x/O/sub y/ where M is magnesium, zinc, manganese, or iron, R is aluminum, chromic chromium, ferric iron, or manganic manganese, and m, n, x, and y are whole numbers. Specific examples are spinel, magnesium aluminate, magnetite, magnesioferrite, chromite, and franklinite.

  3. Improving care of dying children.

    PubMed Central

    Martinson, I M

    1995-01-01

    Every year about 5,000 children aged 0 to 14 years need hospice care in the United States. Children seem to know that they are dying, although this is difficult for parents to accept. Clear, empathic understanding is needed. Communication with clarity and understanding is imperative with the changes in goals from cure to palliation to comfort. The ideal place for most dying children is at home, where symptoms can be managed as effectively as in a hospital. PMID:7571589

  4. Overlap in Bibliographic Databases.

    ERIC Educational Resources Information Center

    Hood, William W.; Wilson, Concepcion S.

    2003-01-01

    Examines the topic of Fuzzy Set Theory to determine the overlap of coverage in bibliographic databases. Highlights include examples of comparisons of database coverage; frequency distribution of the degree of overlap; records with maximum overlap; records unique to one database; intra-database duplicates; and overlap in the top ten databases.…

  5. The EXOSAT database system. Available databases.

    NASA Astrophysics Data System (ADS)

    Barron, C.

    1991-02-01

    This User's Guide describes the databases that are currently available by remote login to the EXOSAT/ESTEC site of the EXOSAT database system. This includes where ever possible the following: brief descriptions of each observatory, telescope and instrument references to more complete observatory descriptions a list of the contents of each database and how it was generated, parameter descriptions.

  6. Use of RSP Tooling to Manufacture Die Casting Dies

    SciTech Connect

    Kevin McHugh

    2004-07-01

    The technology and art used to construct die casting dies has seen many improvements over the years. However, the time lag from when a design is finalized to the time a tool is in production has remained essentially the same. The two main causes for the bottleneck are the need to qualify a part design by making prototypes (usually from an alternative process), and the production tooling lead time after the prototypes are approved. Production tooling costs are high due to the labor and equipment costs associated with transforming a forged block of tool steel into a finished tool. CNC machining, sink EDM, benching, engraving and heat treatment unit operations are typically involved. As a result, there is increasing interest in rapid tooling (RT) technologies that shorten the design-to-part cycle and reduce the cost of dies. There are currently more than 20 RT methods being developed and refined around the world (1). The "rapid" in rapid tooling suggests time compression for tool delivery, but does not address robustness as nearly all RT approaches are intended for low-volume prototype work, primarily for molding plastics. Few options exist for die casting. An RT technology suitable for production-quality tooling in the time it normally takes for prototype tooling is highly desirable. In fact, there would be no need for a distinction between prototype and production tooling. True prototype parts could be made using the same processing conditions and materials intended for production. Qualification of the prototype part would allow the manufacturer to go directly into production with the same tool. A relatively new RT technology, Rapid Solidification Process (RSP) Tooling, is capable of making production-quality tooling in an RT timeframe for die casting applications. RSP Tooling, was developed at the Idaho National Engineering and Environmental Laboratory (INEEL), and commercialized with the formation of RSP Tooling, LLC (2). This paper describes the process, and

  7. Acting to let someone die.

    PubMed

    McGee, Andrew

    2015-02-01

    This paper examines the recent prominent view in medical ethics that withdrawing life-sustaining treatment (LST) is an act of killing. I trace this view to the rejection of the traditional claim that withdrawing LST is an omission rather than an act. Although that traditional claim is not as problematic as this recent prominent view suggests, my main claim is that even if we accepted that withdrawing LST should be classified as an act rather than as an omission, it could still be classified as letting die rather than killing. Even though omissions are contrasted with acts, letting die need not be, for one can let die by means of acts. The remainder of the paper is devoted to establishing this claim and addresses certain objections to it. PMID:24320715

  8. Clinical management of dying patients.

    PubMed Central

    Gavrin, J; Chapman, C R

    1995-01-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts. PMID:7571591

  9. 'Die Zeit' im Konversationsunterricht ('Die Zeit' in a Conversation Class)

    ERIC Educational Resources Information Center

    Becker-Cantarino, Barbel

    1975-01-01

    The German weekly newspaper "Die Zeit" contains a very rich variety of topics and is therefore an inexhaustable source for an exciting conversation class. This article outlines and lists the advantages of a German conversation course organized around this newspaper. (Text is in German.) (TL)

  10. Portable punch and die jig

    DOEpatents

    Lewandowski, Edward F.; Anderson, Petrus A.

    1978-01-01

    A portable punch and die jig includes a U-shaped jig of predetermined width having a slot of predetermined width in the base thereof extending completely across the width of the jig adapted to fit over the walls of rectangular tubes and a punch and die assembly disposed in a hole extending through the base of the jig communicating with the slot in the base of the jig for punching a hole in the walls of the rectangular tubes at precisely determined locations.

  11. Dying radio galaxies in clusters

    NASA Astrophysics Data System (ADS)

    Murgia, M.; Parma, P.; Mack, K.-H.; de Ruiter, H. R.; Fanti, R.; Govoni, F.; Tarchi, A.; Giacintucci, S.; Markevitch, M.

    2011-02-01

    Aims: We present a study of five "dying" nearby (z ≤ 0.2) radio galaxies belonging to both the WENSS minisurvey and the B2 bright catalogs WNB1734+6407, WNB1829+6911, WNB1851+5707, B2 0120+33, and B2 1610+29. Methods: These sources have been selected on the basis of their extremely steep broad-band radio spectra, which strongly indicates that either these objects belong to the rare class of dying radio galaxies or we are observing "fossil" radio plasma remaining from a previous instance of nuclear activity. We derive the relative duration of the dying phase from the fit of a synchrotron radiative model to the radio spectra of the sources. Results: The modeling of the integrated spectra and the deep spectral index images obtained with the VLA confirmed that in these sources the central engine has ceased to be active for a significant fraction of their lifetime, although their extended lobes have not yet completely faded away. We found that WNB1851+5707 is in reality composed of two distinct dying galaxies, which appear blended together as a single source in the WENSS. In the cases of WNB1829+6911 and B2 0120+33, the fossil radio lobes are seen in conjunction with a currently active core. A very faint core is also detected in a MERLIN image of WNB1851+5707a, one of the two dying sources composing WNB1851+5707. We found that all sources in our sample are located (at least in projection) at the center of an X-ray emitting cluster. Conclusions: Our results suggest that the duration of the dying phase for a radio source in a cluster can be significantly higher than that of a radio galaxy in the field, although no firm conclusions can be drawn because of the small number statistics involved. The simplest interpretation of the tendency for dying galaxies to be found in clusters is that the low-frequency radio emission from the fading radio lobes lasts longer if their expansion is somewhat reduced or even stopped. Another possibility is that the occurrence of dying

  12. Die Herz-Lungen-Maschine

    NASA Astrophysics Data System (ADS)

    Krane, Markus; Bauernschmitt, Robert; Lange, Rüdiger

    Das Kapitel der modernen Herzchirurgie mit Einsatz der Herz-Lungen-Maschine am Menschen beginnt am 6. Mai 1953, als J. Gibbon bei einer 18-jährigen Patientin einen angeborenen Defekt in der Vorhofscheidewand verschließt [1]. Mit ersten experimentellen Versuchen zur extrakorporalen Zirkulation begann Gibbon bereits in den 30er Jahren des 20. Jahrhunderts. Die Grundlage für die heute gebräuchliche Rollerpumpe schufen Porter und Bradley mit ihrer "rotary pump“, welche sie 1855 zum Patent anmeldeten. Diese Pumpe wurde von DeBakey und Schmidt modifiziert und entspricht im Wesentlichen noch der heute sich im Routinebetrieb befindlichen Rollerpumpe [2].

  13. Databases: Beyond the Basics.

    ERIC Educational Resources Information Center

    Whittaker, Robert

    This presented paper offers an elementary description of database characteristics and then provides a survey of databases that may be useful to the teacher and researcher in Slavic and East European languages and literatures. The survey focuses on commercial databases that are available, usable, and needed. Individual databases discussed include:…

  14. Reflective Database Access Control

    ERIC Educational Resources Information Center

    Olson, Lars E.

    2009-01-01

    "Reflective Database Access Control" (RDBAC) is a model in which a database privilege is expressed as a database query itself, rather than as a static privilege contained in an access control list. RDBAC aids the management of database access controls by improving the expressiveness of policies. However, such policies introduce new interactions…

  15. Human Mitochondrial Protein Database

    National Institute of Standards and Technology Data Gateway

    SRD 131 Human Mitochondrial Protein Database (Web, free access)   The Human Mitochondrial Protein Database (HMPDb) provides comprehensive data on mitochondrial and human nuclear encoded proteins involved in mitochondrial biogenesis and function. This database consolidates information from SwissProt, LocusLink, Protein Data Bank (PDB), GenBank, Genome Database (GDB), Online Mendelian Inheritance in Man (OMIM), Human Mitochondrial Genome Database (mtDB), MITOMAP, Neuromuscular Disease Center and Human 2-D PAGE Databases. This database is intended as a tool not only to aid in studying the mitochondrion but in studying the associated diseases.

  16. Improved Life of Die Casting Dies of H13 Steel by Attaining Improved Mechanical Properties and Distortion Control During Heat Treatment

    SciTech Connect

    J. F. Wallace; D. Schwam

    1998-10-01

    The ultimate goal of this project is to increase die casting die life by using fast enough quenching rates to obtain good toughness and fatigue resistance in premium grade H-13 steel dies. The main tasks of the project were to compile a database on physical and mechanical properties of H-13; conduct gas quenching experiments to determine cooling rates of dies in difference vacuum furnaces; measure the as-quenched distortion of dies and the residual stresses; generate finite element analysis models to predict cooling rates, distortion, and residual stress of gas quenched dies; and establish rules and create PC-based expert system for prediction of cooling rates, distortion, and residual stress in vacuum/gas quenched H-13 dies. Cooling curves during gas quenching of H-13 blocks and die shapes have been measured under a variety of gas pressure. Dimensional changes caused by the gas quenching processes have been determined by accurate mapping of all surfaces with coordinate measuring machines before and after the quench. Residual stresses were determined by the ASTM E837 hole-drilling strain gage method. To facilitate the computer modeling work, a comprehensive database of H-13 mechanical and physical properties has been compiled. Finite element analysis of the heat treated shapes has been conducted using the TRAST/ABAQUS codes. There is a good fit between the predicted and measured distortion contours. However, the magnitude of the predicted distortion and residual stresses does not match well the measured values. Further fine tuning of the model is required before it can be used to predict distortion and residual stress in a quantitative manner. This last step is a prerequisite to generating rules for a reliable expert system.

  17. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  18. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  19. Integrated Forming Simulations and Die Structural Analysis for Optimal Die Designs

    NASA Astrophysics Data System (ADS)

    Aitharaju, Venkat; Liu, Malcolm; Dong, Jennifer; Zhang, Jimmy; Wang, Chuan-tao

    2005-08-01

    After gaining a huge success in applying stamping simulations and formability analysis to validate die face developments, GM moves forward to winning total manufacturability in stamping process. Of which, ensuring die structure integrity and minimizing weight is one of the important initiatives. Stamping die design (or solid modeling of stamping dies) was traditionally conducted by following the die design manuals and standards. For any design changes beyond the standards, however, there are no math-based tools available to die designers to verify the outcome of the changes. Die structural analysis (DSA) provides a math-tool to validate the design changes and quantify the safety factors. Several years ago, GM Manufacturing Engineering — Die Center started die structural analysis to meet the increasing demands of customer needs in various areas: (1) to validate design changes; (2) to identify root cause of die breakage during the tryout and stamping operations and propose repair schemes; (3) to optimize the die design for weight reduction; (4) to improve press throughput via optimizing the scrap chute openings, and (5) to provide a math-based tool to validate revisions to the current die design standards. In the integrated forming and die structural analysis, after successful line die surface developments, the forming loads (binder force, pad force, and forming tonnages) are extracted from forming simulations and applied to solid die members for structural analyses of stress, strains, and deflections. In the past few years, Die Center conducted static, dynamic and fatigue analysis for many dies that covers the die design changes requested by die design, die construction and stamping plants. This paper presents some fundamentals and issues of integrated forming and die structural analysis and illustrates the significant impact of die structural analysis on die design, die construction and production stamping.

  20. Exploratory study on H13 steel dies

    SciTech Connect

    Sunwoo, A.J.

    1994-04-01

    Ultrahigh-strength H13 steel is a recommended die material for aluminum die casting; dies made from H13 steel can be safely water- cooled during hot working operations without cracking. However, after time the dies exhibited surface cracking and excessive wear. Erosive wear also occurs owing to high pressure injection of molten Al. An exploratory study was made of the causes for surface cracking of H13 dies. Results suggest that surface cracking is caused by interrelated factors, internal to the die material as well as externally induced conditions.

  1. The thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The effects of welding, five selected surface coatings, and stress relieving on the thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies were studied using eleven thermal fatigue specimens. Stress relieving was conducted after each 5,000 cycle interval at 1050 F for three hours. Four thermal fatigue specimens were welded with H-13 or maraging steel welding rods at ambient and elevated temperatures and subsequently, subjected to different post-weld heat treatments. Crack patterns were examined at 5,000, 10,000, and 15,000 cycles. The thermal fatigue resistance is expressed by two crack parameters which are the average maximum crack and the average cracked area. The results indicate that a significant improvement in thermal fatigue resistance over the control was obtained from the stress-relieving treatment. Small improvements were obtained from the H-13 welded specimens and from a salt bath nitrogen and carbon-surface treatment. The other surface treatments and welded specimens either did not affect or had a detrimental influence on the thermal fatigue properties of the H-13 die steel.

  2. Guide for extrusion dies eliminates straightening operation

    NASA Technical Reports Server (NTRS)

    Gyorgak, C. A.; Hoover, R. J.

    1964-01-01

    To prevent distortion of extruded metal, a guidance assembly is aligned with the die. As the metal emerges from the extrusion dies, it passes directly into the receiver and straightening tube system, and the completed extrusion is withdrawn.

  3. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing. PMID:25080714

  4. Killing, letting die and euthanasia.

    PubMed

    Husak, D N

    1979-12-01

    Medical ethicists debate whether or not the moral assessment of cases of euthanasia should depend on whether the patient is 'killed' or 'allowed to die'. The usual presupposition is that a clear distinction between killing and letting die can be drawn so that this substantive question is not begged. I contend that the categorisation of cases of instances of killing rather than as instances of letting die depends in part on a prior moral assessment of the case. Hence is it trivially rather than substantively true that the distinction has moral significance. But even if a morally neutral (ie non-question begging) distinction could be drawn, its application to the euthanasia controversy is problematic. I illustrate the difficulties of employing this distinction to reach moral conclusions by critically discussing Philippa Foot's recent treatment of euthanasia. I conclude that even if an act of euthanasia is an instance of killing, and there exists a prima facie moral duty not to kill, and no more stringent duty overrides this duty, one still cannot determine such an act to be morally impermissible. PMID:541821

  5. Adolescents’ Perceived Risk of Dying

    PubMed Central

    Fischhoff, Baruch; de Bruin, Wändi Bruine; Parker, Andrew M.; Millstein, Susan G.; Halpern-Felsher, Bonnie L.

    2009-01-01

    Purpose Although adolescents’ expectations are accurate or moderately optimistic for many significant life events, they greatly overestimate their chances of dying soon. We examine here whether adolescents’ mortality judgments are correlated with their perceptions of direct threats to their survival. Such sensitivity would indicate the importance of ensuring that adolescents have accurate information about those threats, as well as the psychological support needed to deal with them. Methods Data from two separate studies were used: a national study of 3,436 14–18 year old adolescents and a regional sample of 124 7th graders and 132 9th graders, 12–16 years old. Participants were asked about their chance of dying in the next year and before age 20, and about the extent of various threats to their physical well being. Results Adolescents in both samples greatly overestimated their chance of dying. Those mortality estimates were higher for adolescents who reported direct threats (e.g., an unsafe neighborhood). Thus, adolescents were sensitive to the relative size of threats to their survival, but not to the implications for absolute risk levels. Conclusions Contrary to the folk wisdom that adolescents have a unique sense of invulnerability, those studied here reported an exaggerated sense of mortality, which was highest among those reporting greater threats in their lives. Such fears could affect adolescents’ short-term well being and future planning. PMID:20159504

  6. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  7. Jewish tradition in death and dying.

    PubMed

    Ross, H M

    1998-10-01

    Death is often a spiritually difficult time for the dying and their families. Judaism approaches dying with some unique views that can differ from other religious traditions. Through an understanding of Jewish tradition, nurses can ease the dying process for Jewish patients and their families. PMID:10036429

  8. Physiological Information Database (PID)

    EPA Science Inventory

    EPA has developed a physiological information database (created using Microsoft ACCESS) intended to be used in PBPK modeling. The database contains physiological parameter values for humans from early childhood through senescence as well as similar data for laboratory animal spec...

  9. THE ECOTOX DATABASE

    EPA Science Inventory

    The database provides chemical-specific toxicity information for aquatic life, terrestrial plants, and terrestrial wildlife. ECOTOX is a comprehensive ecotoxicology database and is therefore essential for providing and suppoirting high quality models needed to estimate population...

  10. Network II Database

    Energy Science and Technology Software Center (ESTSC)

    1994-11-07

    The Oak Ridge National Laboratory (ORNL) Rail and Barge Network II Database is a representation of the rail and barge system of the United States. The network is derived from the Federal Rail Administration (FRA) rail database.

  11. Household Products Database: Pesticides

    MedlinePlus

    ... Names Types of Products Manufacturers Ingredients About the Database FAQ Product Recalls Help Glossary Contact Us More ... holders. Information is extracted from Consumer Product Information Database ©2001-2015 by DeLima Associates. All rights reserved. ...

  12. MPlus Database system

    SciTech Connect

    Not Available

    1989-01-20

    The MPlus Database program was developed to keep track of mail received. This system was developed by TRESP for the Department of Energy/Oak Ridge Operations. The MPlus Database program is a PC application, written in dBase III+'' and compiled with Clipper'' into an executable file. The files you need to run the MPLus Database program can be installed on a Bernoulli, or a hard drive. This paper discusses the use of this database.

  13. Aviation Safety Issues Database

    NASA Technical Reports Server (NTRS)

    Morello, Samuel A.; Ricks, Wendell R.

    2009-01-01

    The aviation safety issues database was instrumental in the refinement and substantiation of the National Aviation Safety Strategic Plan (NASSP). The issues database is a comprehensive set of issues from an extremely broad base of aviation functions, personnel, and vehicle categories, both nationally and internationally. Several aviation safety stakeholders such as the Commercial Aviation Safety Team (CAST) have already used the database. This broader interest was the genesis to making the database publically accessible and writing this report.

  14. Mission and Assets Database

    NASA Technical Reports Server (NTRS)

    Baldwin, John; Zendejas, Silvino; Gutheinz, Sandy; Borden, Chester; Wang, Yeou-Fang

    2009-01-01

    Mission and Assets Database (MADB) Version 1.0 is an SQL database system with a Web user interface to centralize information. The database stores flight project support resource requirements, view periods, antenna information, schedule, and forecast results for use in mid-range and long-term planning of Deep Space Network (DSN) assets.

  15. Plant and Crop Databases

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Databases have become an integral part of all aspects of biological research, including basic and applied plant biology. The importance of databases continues to increase as the volume of data from direct and indirect genomics approaches expands. What is not always obvious to users of databases is t...

  16. Visualization of multidimensional database

    NASA Astrophysics Data System (ADS)

    Lee, Chung

    2008-01-01

    The concept of multidimensional databases has been extensively researched and wildly used in actual database application. It plays an important role in contemporary information technology, but due to the complexity of its inner structure, the database design is a complicated process and users are having a hard time fully understanding and using the database. An effective visualization tool for higher dimensional information system helps database designers and users alike. Most visualization techniques focus on displaying dimensional data using spreadsheets and charts. This may be sufficient for the databases having three or fewer dimensions but for higher dimensions, various combinations of projection operations are needed and a full grasp of total database architecture is very difficult. This study reviews existing visualization techniques for multidimensional database and then proposes an alternate approach to visualize a database of any dimension by adopting the tool proposed by Kiviat for software engineering processes. In this diagramming method, each dimension is represented by one branch of concentric spikes. This paper documents a C++ based visualization tool with extensive use of OpenGL graphics library and GUI functions. Detailed examples of actual databases demonstrate the feasibility and effectiveness in visualizing multidimensional databases.

  17. Die Welt des Herrn Kuhn

    NASA Astrophysics Data System (ADS)

    Kern, Daniela

    Eines Morgens erwachte Herr Kuhn fröstelnd und staunte darüber, dass es in seinerWohnung eiskalt war. Dennoch quälte er sich aus seiner kuscheligen Bettdecke heraus und schlurfte ins Bad. "Hoffentlich wird wenigstens das Wasser warm", dachte er sich, als er den Wasserhahn betätigte - aber es kam nicht nur kein warmesWasser, außer einem unheilvollen Gluckser kam gar nichts aus der Leitung. "Dann werde ich wohl mal den Klempner anrufen", sprach er sich leise in den Bart und griff zu seinem Handy - doch das Netz war tot! Herr Kuhn begann nun, sich ernsthaft Sorgen zu machen, "Oje, was ist denn heute nur los? Ist irgendetwas Schlimmes passiert?" Um einen besseren Überblick über die Lage zu bekommen und sich austauschen zu können, brannte er nun förmlich darauf, rauszugehen und zur Arbeit zu fahren. An anderen Tagen, die er frisch geduscht und mit Kaffee und Marmeladen-Brot begann, war er selten so motiviert. So ging er also nun mit leerem Magen aus dem Haus. Hätte er den Versuch unternommen, sein tägliches Marmeladenbrot zuzubereiten, und dafür den Kühlschrank geöffnet, um das Marmeladenglas herauszunehmen, wäre ihm aufgefallen, dass auch die Stromversorgung Störungen unterworfen war, unschön zu erkennen an den ersten grünen, felligen Inseln auf seinem Lieblingskäse.

  18. An Introduction to Database Structure and Database Machines.

    ERIC Educational Resources Information Center

    Detweiler, Karen

    1984-01-01

    Enumerates principal management objectives of database management systems (data independence, quality, security, multiuser access, central control) and criteria for comparison (response time, size, flexibility, other features). Conventional database management systems, relational databases, and database machines used for backend processing are…

  19. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  20. 2010 Worldwide Gasification Database

    DOE Data Explorer

    The 2010 Worldwide Gasification Database describes the current world gasification industry and identifies near-term planned capacity additions. The database lists gasification projects and includes information (e.g., plant location, number and type of gasifiers, syngas capacity, feedstock, and products). The database reveals that the worldwide gasification capacity has continued to grow for the past several decades and is now at 70,817 megawatts thermal (MWth) of syngas output at 144 operating plants with a total of 412 gasifiers.

  1. ITS-90 Thermocouple Database

    National Institute of Standards and Technology Data Gateway

    SRD 60 NIST ITS-90 Thermocouple Database (Web, free access)   Web version of Standard Reference Database 60 and NIST Monograph 175. The database gives temperature -- electromotive force (emf) reference functions and tables for the letter-designated thermocouple types B, E, J, K, N, R, S and T. These reference functions have been adopted as standards by the American Society for Testing and Materials (ASTM) and the International Electrotechnical Commission (IEC).

  2. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  3. Die singulation method and package formed thereby

    SciTech Connect

    Anderson, Robert C.; Shul, Randy J.; Clews, Peggy J.; Baker, Michael S.; De Boer, Maarten P.

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  4. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  5. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  6. Opening CEM vendor databases

    SciTech Connect

    Long, A.; Patel, D.

    1995-12-31

    CEM database performance requirements (i.e., voluminous data storage, rapid response times) often conflict with the concept of an open, accessible database. Utilities would like to use their CEM data for more purposes than simply submitting environmental reports. But in most cases, other uses are inhibited because today`s sophisticated CEM systems incorporate databases that have forsaken openness and accessibility in favor of performance. Several options are available for CEM vendors wishing to move in the direction of open, accessible CEM databases.

  7. Databases for Microbiologists

    PubMed Central

    2015-01-01

    Databases play an increasingly important role in biology. They archive, store, maintain, and share information on genes, genomes, expression data, protein sequences and structures, metabolites and reactions, interactions, and pathways. All these data are critically important to microbiologists. Furthermore, microbiology has its own databases that deal with model microorganisms, microbial diversity, physiology, and pathogenesis. Thousands of biological databases are currently available, and it becomes increasingly difficult to keep up with their development. The purpose of this minireview is to provide a brief survey of current databases that are of interest to microbiologists. PMID:26013493

  8. Veterans Administration Databases

    Cancer.gov

    The Veterans Administration Information Resource Center provides database and informatics experts, customer service, expert advice, information products, and web technology to VA researchers and others.

  9. Backing up DMF Databases

    NASA Technical Reports Server (NTRS)

    Cardo, Nicholas P.; Woodrow, Thomas (Technical Monitor)

    1994-01-01

    A complete backup of the Cray Data Migration Facility (DMF) databases should include the data migration databases, all media specific process' (MSP's) databases, and the journal file. The backup should be able to accomplished without impacting users or stopping DMF. The High Speed Processors group at the Numerical Aerodynamics Simulation (NAS) Facility at NASA Ames Research Center undertook the task of finding an effective and efficient way to backup all DMF databases. This has been accomplished by taking advantage of new features introduced in DMF 2.0 and adding a minor modification to the dmdaemon. This paper discusses the investigation and the changes necessary to implement these enhancements.

  10. Should assisted dying be legalised?

    PubMed Central

    2014-01-01

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion “This House Would Legalise Assisted Dying”. This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework. PMID:24423249

  11. Atomic Spectra Database (ASD)

    National Institute of Standards and Technology Data Gateway

    SRD 78 NIST Atomic Spectra Database (ASD) (Web, free access)   This database provides access and search capability for NIST critically evaluated data on atomic energy levels, wavelengths, and transition probabilities that are reasonably up-to-date. The NIST Atomic Spectroscopy Data Center has carried out these critical compilations.

  12. CDS - Database Administrator's Guide

    NASA Astrophysics Data System (ADS)

    Day, J. P.

    This guide aims to instruct the CDS database administrator in: o The CDS file system. o The CDS index files. o The procedure for assimilating a new CDS tape into the database. It is assumed that the administrator has read SUN/79.

  13. Ionic Liquids Database- (ILThermo)

    National Institute of Standards and Technology Data Gateway

    SRD 147 Ionic Liquids Database- (ILThermo) (Web, free access)   IUPAC Ionic Liquids Database, ILThermo, is a free web research tool that allows users worldwide to access an up-to-date data collection from the publications on experimental investigations of thermodynamic, and transport properties of ionic liquids as well as binary and ternary mixtures containing ionic liquids.

  14. Database Searching by Managers.

    ERIC Educational Resources Information Center

    Arnold, Stephen E.

    Managers and executives need the easy and quick access to business and management information that online databases can provide, but many have difficulty articulating their search needs to an intermediary. One possible solution would be to encourage managers and their immediate support staff members to search textual databases directly as they now…

  15. Morchella MLST database

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Welcome to the Morchella MLST database. This dedicated database was set up at the CBS-KNAW Biodiversity Center by Vincent Robert in February 2012, using BioloMICS software (Robert et al., 2011), to facilitate DNA sequence-based identifications of Morchella species via the Internet. The current datab...

  16. First Look: TRADEMARKSCAN Database.

    ERIC Educational Resources Information Center

    Fernald, Anne Conway; Davidson, Alan B.

    1984-01-01

    Describes database produced by Thomson and Thomson and available on Dialog which contains over 700,000 records representing all active federal trademark registrations and applications for registrations filed in United States Patent and Trademark Office. A typical record, special features, database applications, learning to use TRADEMARKSCAN, and…

  17. HIV Structural Database

    National Institute of Standards and Technology Data Gateway

    SRD 102 HIV Structural Database (Web, free access)   The HIV Protease Structural Database is an archive of experimentally determined 3-D structures of Human Immunodeficiency Virus 1 (HIV-1), Human Immunodeficiency Virus 2 (HIV-2) and Simian Immunodeficiency Virus (SIV) Proteases and their complexes with inhibitors or products of substrate cleavage.

  18. Biological Macromolecule Crystallization Database

    National Institute of Standards and Technology Data Gateway

    SRD 21 Biological Macromolecule Crystallization Database (Web, free access)   The Biological Macromolecule Crystallization Database and NASA Archive for Protein Crystal Growth Data (BMCD) contains the conditions reported for the crystallization of proteins and nucleic acids used in X-ray structure determinations and archives the results of microgravity macromolecule crystallization studies.

  19. Assignment to database industy

    NASA Astrophysics Data System (ADS)

    Abe, Kohichiroh

    Various kinds of databases are considered to be essential part in future large sized systems. Information provision only by databases is also considered to be growing as the market becomes mature. This paper discusses how such circumstances have been built and will be developed from now on.

  20. Dictionary as Database.

    ERIC Educational Resources Information Center

    Painter, Derrick

    1996-01-01

    Discussion of dictionaries as databases focuses on the digitizing of The Oxford English dictionary (OED) and the use of Standard Generalized Mark-Up Language (SGML). Topics include the creation of a consortium to digitize the OED, document structure, relational databases, text forms, sequence, and discourse. (LRW)

  1. A Quality System Database

    NASA Technical Reports Server (NTRS)

    Snell, William H.; Turner, Anne M.; Gifford, Luther; Stites, William

    2010-01-01

    A quality system database (QSD), and software to administer the database, were developed to support recording of administrative nonconformance activities that involve requirements for documentation of corrective and/or preventive actions, which can include ISO 9000 internal quality audits and customer complaints.

  2. BioImaging Database

    Energy Science and Technology Software Center (ESTSC)

    2006-10-25

    The Biolmaging Database (BID) is a relational database developed to store the data and meta-data for the 3D gene expression in early Drosophila embryo development on a cellular level. The schema was written to be used with the MySQL DBMS but with minor modifications can be used on any SQL compliant relational DBMS.

  3. The intelligent database machine

    NASA Technical Reports Server (NTRS)

    Yancey, K. E.

    1985-01-01

    The IDM data base was compared with the data base crack to determine whether IDM 500 would better serve the needs of the MSFC data base management system than Oracle. The two were compared and the performance of the IDM was studied. Implementations that work best on which database are implicated. The choice is left to the database administrator.

  4. Build Your Own Database.

    ERIC Educational Resources Information Center

    Jacso, Peter; Lancaster, F. W.

    This book is intended to help librarians and others to produce databases of better value and quality, especially if they have had little previous experience in database construction. Drawing upon almost 40 years of experience in the field of information retrieval, this book emphasizes basic principles and approaches rather than in-depth and…

  5. Database Reviews: Legal Information.

    ERIC Educational Resources Information Center

    Seiser, Virginia

    Detailed reviews of two legal information databases--"Laborlaw I" and "Legal Resource Index"--are presented in this paper. Each database review begins with a bibliographic entry listing the title; producer; vendor; cost per hour contact time; offline print cost per citation; time period covered; frequency of updates; and size of file. A detailed…

  6. Database in Artificial Intelligence.

    ERIC Educational Resources Information Center

    Wilkinson, Julia

    1986-01-01

    Describes a specialist bibliographic database of literature in the field of artificial intelligence created by the Turing Institute (Glasgow, Scotland) using the BRS/Search information retrieval software. The subscription method for end-users--i.e., annual fee entitles user to unlimited access to database, document provision, and printed awareness…

  7. Structural Ceramics Database

    National Institute of Standards and Technology Data Gateway

    SRD 30 NIST Structural Ceramics Database (Web, free access)   The NIST Structural Ceramics Database (WebSCD) provides evaluated materials property data for a wide range of advanced ceramics known variously as structural ceramics, engineering ceramics, and fine ceramics.

  8. National Vulnerability Database (NVD)

    National Institute of Standards and Technology Data Gateway

    National Vulnerability Database (NVD) (Web, free access)   NVD is a comprehensive cyber security vulnerability database that integrates all publicly available U.S. Government vulnerability resources and provides references to industry resources. It is based on and synchronized with the CVE vulnerability naming standard.

  9. Knowledge Discovery in Databases.

    ERIC Educational Resources Information Center

    Norton, M. Jay

    1999-01-01

    Knowledge discovery in databases (KDD) revolves around the investigation and creation of knowledge, processes, algorithms, and mechanisms for retrieving knowledge from data collections. The article is an introductory overview of KDD. The rationale and environment of its development and applications are discussed. Issues related to database design…

  10. Online Database Searching Workbook.

    ERIC Educational Resources Information Center

    Littlejohn, Alice C.; Parker, Joan M.

    Designed primarily for use by first-time searchers, this workbook provides an overview of online searching. Following a brief introduction which defines online searching, databases, and database producers, five steps in carrying out a successful search are described: (1) identifying the main concepts of the search statement; (2) selecting a…

  11. CPDB: Carcinogenic Potency Database.

    PubMed

    Fitzpatrick, Roberta Bronson

    2008-01-01

    The Carcinogenic Potency Database reports analyses of animal cancer tests on 1,547 chemicals. These tests are used in support of cancer risk assessments for humans. Results are searchable and are made available via the National Library of Medicine's (NLM) TOXNET system. This column will provide background information on the database, as well as present search basics. PMID:19042710

  12. Improved life of die casting dies of H13 steel by attaining improved mechanical properties and distortion control during heat treatment. Year 1 report, October 1994--September 1995

    SciTech Connect

    Wallace, J.F.; Schwam, D.

    1995-03-01

    Optimum heat treatment of dies (quenching) is critical in ensuring satisfactory service performance: rapid cooling rates increase the thermal fatigue/heat checking resistance of the steel, although very fast cooling rates can also lead to distortion and lower fracture toughness, increasing the danger of catastrophic fracture. Goal of this project is to increase die life by using fast enough quenching rates (> 30 F/min ave cooling rate from 1750 to 550 F, 1/2 in. below working surfaces) to obtain good toughness and fatigue resistance in Premium grade H-13 steel dies. An iterative approach of computer modeling validated by experiment was taken. Cooling curves during gas quenching of H-13 blocks and die shapes were measured under 2, 5, and 7.5 bar N2 and 4 bar Ar. Resulting dimensional changes and residual stresses were determined. To facilitate the computer modeling work, a database of H-13 mechanical and physical properties was compiled. Finite element analysis of the heat treated shapes was conducted. Good fit of modeled vs measured quenched rates was demonstrated for simple die shapes. The models predict well the phase transformation products from the quench. There is good fit between predicted and measured distortion contours; however magnitude of predicted distortion and residual stresses does not match well the measured values. Further fine tuning of the model is required.

  13. Cascadia Tsunami Deposit Database

    USGS Publications Warehouse

    Peters, Robert; Jaffe, Bruce; Gelfenbaum, Guy; Peterson, Curt

    2003-01-01

    The Cascadia Tsunami Deposit Database contains data on the location and sedimentological properties of tsunami deposits found along the Cascadia margin. Data have been compiled from 52 studies, documenting 59 sites from northern California to Vancouver Island, British Columbia that contain known or potential tsunami deposits. Bibliographical references are provided for all sites included in the database. Cascadia tsunami deposits are usually seen as anomalous sand layers in coastal marsh or lake sediments. The studies cited in the database use numerous criteria based on sedimentary characteristics to distinguish tsunami deposits from sand layers deposited by other processes, such as river flooding and storm surges. Several studies cited in the database contain evidence for more than one tsunami at a site. Data categories include age, thickness, layering, grainsize, and other sedimentological characteristics of Cascadia tsunami deposits. The database documents the variability observed in tsunami deposits found along the Cascadia margin.

  14. Protein sequence databases.

    PubMed

    Apweiler, Rolf; Bairoch, Amos; Wu, Cathy H

    2004-02-01

    A variety of protein sequence databases exist, ranging from simple sequence repositories, which store data with little or no manual intervention in the creation of the records, to expertly curated universal databases that cover all species and in which the original sequence data are enhanced by the manual addition of further information in each sequence record. As the focus of researchers moves from the genome to the proteins encoded by it, these databases will play an even more important role as central comprehensive resources of protein information. Several the leading protein sequence databases are discussed here, with special emphasis on the databases now provided by the Universal Protein Knowledgebase (UniProt) consortium. PMID:15036160

  15. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  16. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  17. The Right To Die. Public Talk Series.

    ERIC Educational Resources Information Center

    Pasquerella, Lynn

    This program guide on the right to die provides policy issue information where ethical concerns have a prominent place. Three positions about the right to die are presented: (1) mercy killing and assisted suicide should be legally permitted in certain cases; (2) legal status should be given to living wills and other advance directives that would…

  18. Die Evolution der Religiosität

    NASA Astrophysics Data System (ADS)

    Voland, Eckart

    Ein konsequent darwinischer Blick auf den Menschen bedeutet, auch im Denken, Fühlen und Handeln biologische Anpassungsgeschichte zu suchen, denn auch die psychischen und mentalen Eigenheiten des Homo sapiens unterliegen der natürlichen Selektion. Lässt sich die religiöse Lebenspraxis von Menschen daher auch aus einer Fitnessperspektive betrachten?

  19. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  20. Assisted dying: a review of international legislation.

    PubMed

    Field, Charlotte; Curtice, Martin

    2009-05-01

    The issue of assisted dying in the UK is increasingly receiving media and academic journal attention. Such reporting often cites, but in little depth, existing legislation in other countries. Such international legislation may also shape future UK assisted dying legislation. PMID:19451872

  1. Apparatus for restraining and transporting dies

    DOEpatents

    Allison, James W.; LaBarre, Timothy L.

    1994-01-01

    Apparatus for restraining and transporting dies in punch press operations is provided. A floatation platen for supporting a die on the platen's upper surface has a plurality of recessed gas exhaust ports on the platen's lower surface. A source of pressurized gas delivers gas to a platen manifold, for delivery to orifices located in the gas exhaust ports. The flow of gas is controlled by a first valve adjacent the gas source and a second valve adjacent the manifold, with the second valve being used to control the gas flow during movement of the die. In this fashion, a die may be moved on a cushion of air from one workstation to a selected second workstation. A moveable hydraulically operated restraining fixture is also provided, for clamping the die in position during the compacting phase, and for releasing the die after completion of the compacting phase by releasing the hydraulic pressure on the restraining fixture. When pressure in the hydraulic cylinders on the restraining fixture is reversed, the restraining fixture will retract so that there is no contact between the die and the restraining fixture, thereby allowing the die to be removed from a first workstation and moved to a second selected workstation.

  2. Hazard Analysis Database Report

    SciTech Connect

    GRAMS, W.H.

    2000-12-28

    The Hazard Analysis Database was developed in conjunction with the hazard analysis activities conducted in accordance with DOE-STD-3009-94, Preparation Guide for U S . Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, for HNF-SD-WM-SAR-067, Tank Farms Final Safety Analysis Report (FSAR). The FSAR is part of the approved Authorization Basis (AB) for the River Protection Project (RPP). This document describes, identifies, and defines the contents and structure of the Tank Farms FSAR Hazard Analysis Database and documents the configuration control changes made to the database. The Hazard Analysis Database contains the collection of information generated during the initial hazard evaluations and the subsequent hazard and accident analysis activities. The Hazard Analysis Database supports the preparation of Chapters 3 ,4 , and 5 of the Tank Farms FSAR and the Unreviewed Safety Question (USQ) process and consists of two major, interrelated data sets: (1) Hazard Analysis Database: Data from the results of the hazard evaluations, and (2) Hazard Topography Database: Data from the system familiarization and hazard identification.

  3. PADB : Published Association Database

    PubMed Central

    Rhee, Hwanseok; Lee, Jin-Sung

    2007-01-01

    Background Although molecular pathway information and the International HapMap Project data can help biomedical researchers to investigate the aetiology of complex diseases more effectively, such information is missing or insufficient in current genetic association databases. In addition, only a few of the environmental risk factors are included as gene-environment interactions, and the risk measures of associations are not indexed in any association databases. Description We have developed a published association database (PADB; ) that includes both the genetic associations and the environmental risk factors available in PubMed database. Each genetic risk factor is linked to a molecular pathway database and the HapMap database through human gene symbols identified in the abstracts. And the risk measures such as odds ratios or hazard ratios are extracted automatically from the abstracts when available. Thus, users can review the association data sorted by the risk measures, and genetic associations can be grouped by human genes or molecular pathways. The search results can also be saved to tab-delimited text files for further sorting or analysis. Currently, PADB indexes more than 1,500,000 PubMed abstracts that include 3442 human genes, 461 molecular pathways and about 190,000 risk measures ranging from 0.00001 to 4878.9. Conclusion PADB is a unique online database of published associations that will serve as a novel and powerful resource for reviewing and interpreting huge association data of complex human diseases. PMID:17877839

  4. ResPlan Database

    NASA Technical Reports Server (NTRS)

    Zellers, Michael L.

    2003-01-01

    The main project I was involved in was new application development for the existing CIS0 Database (ResPlan). This database application was developed in Microsoft Access. Initial meetings with Greg Follen, Linda McMillen, Griselle LaFontaine and others identified a few key weaknesses with the existing database. The weaknesses centered around that while the database correctly modeled the structure of Programs, Projects and Tasks, once the data was entered, the database did not capture any dynamic status information, and as such was of limited usefulness. After the initial meetings my goals were identified as follows: Enhance the ResPlan Database to include qualitative and quantitative status information about the Programs, Projects and Tasks Train staff members about the ResPlan database from both the user perspective and the developer perspective Give consideration to a Web Interface for reporting. Initially, the thought was that there would not be adequate time to actually develop the Web Interface, Greg wanted it understood that this was an eventual goal and as such should be a consideration throughout the development process.

  5. Hazard Analysis Database Report

    SciTech Connect

    GAULT, G.W.

    1999-10-13

    The Hazard Analysis Database was developed in conjunction with the hazard analysis activities conducted in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, for the Tank Waste Remediation System (TWRS) Final Safety Analysis Report (FSAR). The FSAR is part of the approved TWRS Authorization Basis (AB). This document describes, identifies, and defines the contents and structure of the TWRS FSAR Hazard Analysis Database and documents the configuration control changes made to the database. The TWRS Hazard Analysis Database contains the collection of information generated during the initial hazard evaluations and the subsequent hazard and accident analysis activities. The database supports the preparation of Chapters 3,4, and 5 of the TWRS FSAR and the USQ process and consists of two major, interrelated data sets: (1) Hazard Evaluation Database--Data from the results of the hazard evaluations; and (2) Hazard Topography Database--Data from the system familiarization and hazard identification.

  6. Database for propagation models

    NASA Technical Reports Server (NTRS)

    Kantak, Anil V.

    1991-01-01

    A propagation researcher or a systems engineer who intends to use the results of a propagation experiment is generally faced with various database tasks such as the selection of the computer software, the hardware, and the writing of the programs to pass the data through the models of interest. This task is repeated every time a new experiment is conducted or the same experiment is carried out at a different location generating different data. Thus the users of this data have to spend a considerable portion of their time learning how to implement the computer hardware and the software towards the desired end. This situation may be facilitated considerably if an easily accessible propagation database is created that has all the accepted (standardized) propagation phenomena models approved by the propagation research community. Also, the handling of data will become easier for the user. Such a database construction can only stimulate the growth of the propagation research it if is available to all the researchers, so that the results of the experiment conducted by one researcher can be examined independently by another, without different hardware and software being used. The database may be made flexible so that the researchers need not be confined only to the contents of the database. Another way in which the database may help the researchers is by the fact that they will not have to document the software and hardware tools used in their research since the propagation research community will know the database already. The following sections show a possible database construction, as well as properties of the database for the propagation research.

  7. The Gaia Parameter Database

    NASA Astrophysics Data System (ADS)

    de Bruijne, J. H. J.; Lammers, U.; Perryman, M. A. C.

    2005-01-01

    The parallel development of many aspects of a complex mission like Gaia, which includes numerous participants in ESA, industrial companies, and a large and active scientific collaboration throughout Europe, makes keeping track of the many design changes, instrument and operational complexities, and numerical values for the data analysis a very challenging problem. A comprehensive, easily-accessible, up-to-date, and definitive compilation of a large range of numerical quantities is required, and the Gaia parameter database has been established to satisfy these needs. The database is a centralised repository containing, besides mathematical, physical, and astronomical constants, many satellite and subsystem design parameters. At the end of 2004, more than 1600 parameters had been included. Version control has been implemented, providing, next to a `live' version with the most recent parameters, well-defined reference versions of the full database contents. The database can be queried or browsed using a regular Web browser (http://www.rssd.esa.int/Gaia/paramdb). Query results are formated by default in HTML. Data can also be retrieved as Fortran-77, Fortran-90, Java, ANSIC, C++, or XML structures for direct inclusion into software codes in these languages. The idea is that all collaborating scientists can use the database parameters and values, once retrieved, directly linked to computational routines. An off-line access mode is also available, enabling users to automatically download the contents of the database. The database will be maintained actively, and significant extensions of the contents are planned. Consistent use in the future of the database by the Gaia community at large, including all industrial teams, will ensure correct numerical values throughout the complex software systems being built up as details of the Gaia design develop. The database is already being used for the telemetry simulation chain in ESTEC, and in the data simulations for GDAAS2.

  8. Human variation databases

    PubMed Central

    Küntzer, Jan; Eggle, Daniela; Klostermann, Stefan; Burtscher, Helmut

    2010-01-01

    More than 100 000 human genetic variations have been described in various genes that are associated with a wide variety of diseases. Such data provides invaluable information for both clinical medicine and basic science. A number of locus-specific databases have been developed to exploit this huge amount of data. However, the scope, format and content of these databases differ strongly and as no standard for variation databases has yet been adopted, the way data is presented varies enormously. This review aims to give an overview of current resources for human variation data in public and commercial resources. PMID:20639550

  9. International Comparisions Database

    National Institute of Standards and Technology Data Gateway

    International Comparisions Database (Web, free access)   The International Comparisons Database (ICDB) serves the U.S. and the Inter-American System of Metrology (SIM) with information based on Appendices B (International Comparisons), C (Calibration and Measurement Capabilities) and D (List of Participating Countries) of the Comit� International des Poids et Mesures (CIPM) Mutual Recognition Arrangement (MRA). The official source of the data is The BIPM key comparison database. The ICDB provides access to results of comparisons of measurements and standards organized by the consultative committees of the CIPM and the Regional Metrology Organizations.

  10. Hybrid Terrain Database

    NASA Technical Reports Server (NTRS)

    Arthur, Trey

    2006-01-01

    A prototype hybrid terrain database is being developed in conjunction with other databases and with hardware and software that constitute subsystems of aerospace cockpit display systems (known in the art as synthetic vision systems) that generate images to increase pilots' situation awareness and eliminate poor visibility as a cause of aviation accidents. The basic idea is to provide a clear view of the world around an aircraft by displaying computer-generated imagery derived from an onboard database of terrain, obstacle, and airport information.

  11. Phase Equilibria Diagrams Database

    National Institute of Standards and Technology Data Gateway

    SRD 31 NIST/ACerS Phase Equilibria Diagrams Database (PC database for purchase)   The Phase Equilibria Diagrams Database contains commentaries and more than 21,000 diagrams for non-organic systems, including those published in all 21 hard-copy volumes produced as part of the ACerS-NIST Phase Equilibria Diagrams Program (formerly titled Phase Diagrams for Ceramists): Volumes I through XIV (blue books); Annuals 91, 92, 93; High Tc Superconductors I & II; Zirconium & Zirconia Systems; and Electronic Ceramics I. Materials covered include oxides as well as non-oxide systems such as chalcogenides and pnictides, phosphates, salt systems, and mixed systems of these classes.

  12. JICST Factual Database(2)

    NASA Astrophysics Data System (ADS)

    Araki, Keisuke

    The computer programme, which builds atom-bond connection tables from nomenclatures, is developed. Chemical substances with their nomenclature and varieties of trivial names or experimental code numbers are inputted. The chemical structures of the database are stereospecifically stored and are able to be searched and displayed according to stereochemistry. Source data are from laws and regulations of Japan, RTECS of US and so on. The database plays a central role within the integrated fact database service of JICST and makes interrelational retrieval possible.

  13. Databases for materials selection

    SciTech Connect

    1996-06-01

    The Cambridge Materials Selector (CMS2.0) materials database was developed by the Engineering Dept. at Cambridge University in the United Kingdom. This database makes it possible to select a material for a specific application from essentially all classes of materials. Genera, Predict, and Socrates software programs from CLI International, Houston, Texas, automate materials selection and corrosion problem-solving tasks. They are said to significantly reduce the time necessary to select a suitable material and/or to assess a corrosion problem and reach cost-effective solutions. This article describes both databases and tells how to use them.

  14. [Right to die with dignity?].

    PubMed

    Ruiz, Alvaro

    2008-06-01

    The right to die with dignity is an ill-defined concept, with multiple, often inappropriate, interpretations. The current proposition is that the physician take full responsibility for protecting the patients rights, for ensuring a rational use of resources and for overseeing the decision-making process such that the information is adequate and the steps proportioned. This responsibility extends not only to the health status of the patient situation, to the patients prognosis, and to his/her expectations and wishes, but also to the benefits foreseen and to the cost-benefit ratio. Emphasis is placed on two aspects of this relationship. First, dignity can be interpreted in many ways and sometimes, in the name of dignity, the patient is exposed (or exposes him/herself) to suffering, pain and complications that can be avoided. Second, when no reasonable probability of survival is present and a better quality of life is impossible, efforts are better redirected to offering a better quality of death. PMID:18719721

  15. Dying to go to school.

    PubMed

    Shearar, A

    1997-01-01

    In southern Sudan, the recent war sparked a mass migration of boys aged 5-18 who traveled through perilous terrain to the borders of Ethiopia in search of promised security and schooling. Thousands of these children died from hardships suffered in the wild, from the inadvertent or deliberate attacks of warriors, from hunger, from thirst, or from disease. Those who endured the hardships and arrived at their destination were shocked to find only military training centers or rudimentary schooling for those who were too weak or too young to be trained for battle. Eventually, the refugees were forced back into Sudan, and today about 20,000 of these unaccompanied children are displaced. Several nongovernmental organizations are running family reunification projects, and follow-up activities carried out among the reunified children reveal that they carry the scars of their trauma. The drawings the children produce as art therapy usually include the image of a young child holding a school book. While these children have a constant struggle with their memories, those who have not returned home or who have lost their families to war or disease are even more forlorn. As food rations have been halved in the refugee camps, many children are pursuing any possible alternative living arrangement. Some attempt to travel to South Africa or Egypt and some join an army in an effort to overcome the desperation of their present situation. PMID:12294200

  16. NCCDPHP PUBLICATION DATABASE

    EPA Science Inventory

    This database provides bibliographic citations and abstracts of publications produced by the CDC's National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP) including journal articles, monographs, book chapters, reports, policy documents, and fact sheets. Full...

  17. ARTI Refrigerant Database

    SciTech Connect

    Calm, J.M.

    1994-05-27

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  18. THE CTEPP DATABASE

    EPA Science Inventory

    The CTEPP (Children's Total Exposure to Persistent Pesticides and Other Persistent Organic Pollutants) database contains a wealth of data on children's aggregate exposures to pollutants in their everyday surroundings. Chemical analysis data for the environmental media and ques...

  19. Hawaii bibliographic database

    USGS Publications Warehouse

    Wright, T.L.; Takahashi, T.J.

    1998-01-01

    The Hawaii bibliographic database has been created to contain all of the literature, from 1779 to the present, pertinent to the volcanological history of the Hawaiian-Emperor volcanic chain. References are entered in a PC- and Macintosh-compatible EndNote Plus bibliographic database with keywords and abstracts or (if no abstract) with annotations as to content. Keywords emphasize location, discipline, process, identification of new chemical data or age determinations, and type of publication. The database is updated approximately three times a year and is available to upload from an ftp site. The bibliography contained 8460 references at the time this paper was submitted for publication. Use of the database greatly enhances the power and completeness of library searches for anyone interested in Hawaiian volcanism.

  20. Chemical Kinetics Database

    National Institute of Standards and Technology Data Gateway

    SRD 17 NIST Chemical Kinetics Database (Web, free access)   The NIST Chemical Kinetics Database includes essentially all reported kinetics results for thermal gas-phase chemical reactions. The database is designed to be searched for kinetics data based on the specific reactants involved, for reactions resulting in specified products, for all the reactions of a particular species, or for various combinations of these. In addition, the bibliography can be searched by author name or combination of names. The database contains in excess of 38,000 separate reaction records for over 11,700 distinct reactant pairs. These data have been abstracted from over 12,000 papers with literature coverage through early 2000.

  1. Requirements Management Database

    Energy Science and Technology Software Center (ESTSC)

    2009-08-13

    This application is a simplified and customized version of the RBA and CTS databases to capture federal, site, and facility requirements, link to actions that must be performed to maintain compliance with their contractual and other requirements.

  2. Navigating Public Microarray Databases

    PubMed Central

    Bähler, Jürg

    2004-01-01

    With the ever-escalating amount of data being produced by genome-wide microarray studies, it is of increasing importance that these data are captured in public databases so that researchers can use this information to complement and enhance their own studies. Many groups have set up databases of expression data, ranging from large repositories, which are designed to comprehensively capture all published data, through to more specialized databases. The public repositories, such as ArrayExpress at the European Bioinformatics Institute contain complete datasets in raw format in addition to processed data, whilst the specialist databases tend to provide downstream analysis of normalized data from more focused studies and data sources. Here we provide a guide to the use of these public microarray resources. PMID:18629145

  3. Nuclear Science References Database

    SciTech Connect

    Pritychenko, B.; Běták, E.; Singh, B.; Totans, J.

    2014-06-15

    The Nuclear Science References (NSR) database together with its associated Web interface, is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 210,000 articles since the beginning of nuclear science. The weekly-updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center (http://www.nndc.bnl.gov/nsr) and the International Atomic Energy Agency (http://www-nds.iaea.org/nsr)

  4. Navigating public microarray databases.

    PubMed

    Penkett, Christopher J; Bähler, Jürg

    2004-01-01

    With the ever-escalating amount of data being produced by genome-wide microarray studies, it is of increasing importance that these data are captured in public databases so that researchers can use this information to complement and enhance their own studies. Many groups have set up databases of expression data, ranging from large repositories, which are designed to comprehensively capture all published data, through to more specialized databases. The public repositories, such as ArrayExpress at the European Bioinformatics Institute contain complete datasets in raw format in addition to processed data, whilst the specialist databases tend to provide downstream analysis of normalized data from more focused studies and data sources. Here we provide a guide to the use of these public microarray resources. PMID:18629145

  5. Household Products Database

    MedlinePlus

    ... Commercial / Institutional Product Names Types of Products Manufacturers Ingredients About the Database FAQ Product Recalls Help Glossary Contact Us More Resources What's under your kitchen sink, in your garage, in your bathroom, and ...

  6. TREATABILITY DATABASE DESCRIPTION

    EPA Science Inventory

    The Drinking Water Treatability Database (TDB) presents referenced information on the control of contaminants in drinking water. It allows drinking water utilities, first responders to spills or emergencies, treatment process designers, research organizations, academics, regulato...

  7. ARTI Refrigerant Database

    SciTech Connect

    Calm, J.M.

    1995-06-01

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  8. ARTI Refrigerant Database

    SciTech Connect

    Calm, J.M.

    1995-02-01

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase-out of chemical compounds of environmental concern.

  9. Querying genomic databases

    SciTech Connect

    Baehr, A.; Hagstrom, R.; Joerg, D.; Overbeek, R.

    1991-09-01

    A natural-language interface has been developed that retrieves genomic information by using a simple subset of English. The interface spares the biologist from the task of learning database-specific query languages and computer programming. Currently, the interface deals with the E. coli genome. It can, however, be readily extended and shows promise as a means of easy access to other sequenced genomic databases as well.

  10. Steam Properties Database

    National Institute of Standards and Technology Data Gateway

    SRD 10 NIST/ASME Steam Properties Database (PC database for purchase)   Based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for the thermodynamic properties of water and the most recent IAPWS formulations for transport and other properties, this updated version provides water properties over a wide range of conditions according to the accepted international standards.

  11. The ribosomal database project.

    PubMed Central

    Larsen, N; Olsen, G J; Maidak, B L; McCaughey, M J; Overbeek, R; Macke, T J; Marsh, T L; Woese, C R

    1993-01-01

    The Ribosomal Database Project (RDP) is a curated database that offers ribosome data along with related programs and services. The offerings include phylogenetically ordered alignments of ribosomal RNA (rRNA) sequences, derived phylogenetic trees, rRNA secondary structure diagrams and various software packages for handling, analyzing and displaying alignments and trees. The data are available via ftp and electronic mail. Certain analytic services are also provided by the electronic mail server. PMID:8332524

  12. Database computing in HEP

    SciTech Connect

    Day, C.T.; Loken, S.; MacFarlane, J.F. ); May, E.; Lifka, D.; Lusk, E.; Price, L.E. ); Baden, A. . Dept. of Physics); Grossman, R.; Qin, X. . Dept. of Mathematics, Statistics and Computer Science); Cormell, L.; Leibold, P.; Liu, D

    1992-01-01

    The major SSC experiments are expected to produce up to 1 Petabyte of data per year each. Once the primary reconstruction is completed by farms of inexpensive processors. I/O becomes a major factor in further analysis of the data. We believe that the application of database techniques can significantly reduce the I/O performed in these analyses. We present examples of such I/O reductions in prototype based on relational and object-oriented databases of CDF data samples.

  13. Database computing in HEP

    NASA Technical Reports Server (NTRS)

    Day, C. T.; Loken, S.; Macfarlane, J. F.; May, E.; Lifka, D.; Lusk, E.; Price, L. E.; Baden, A.; Grossman, R.; Qin, X.

    1992-01-01

    The major SSC experiments are expected to produce up to 1 Petabyte of data per year each. Once the primary reconstruction is completed by farms of inexpensive processors, I/O becomes a major factor in further analysis of the data. We believe that the application of database techniques can significantly reduce the I/O performed in these analyses. We present examples of such I/O reductions in prototypes based on relational and object-oriented databases of CDF data samples.

  14. Databases: Peter's Picks and Pans.

    ERIC Educational Resources Information Center

    Jacso, Peter

    1995-01-01

    Reviews the best and worst in databases on disk, CD-ROM, and online, and offers judgments and observations on database characteristics. Two databases are praised and three are criticized. (Author/JMV)

  15. Specialist Bibliographic Databases.

    PubMed

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A; Trukhachev, Vladimir I; Kostyukova, Elena I; Gerasimov, Alexey N; Kitas, George D

    2016-05-01

    Specialist bibliographic databases offer essential online tools for researchers and authors who work on specific subjects and perform comprehensive and systematic syntheses of evidence. This article presents examples of the established specialist databases, which may be of interest to those engaged in multidisciplinary science communication. Access to most specialist databases is through subscription schemes and membership in professional associations. Several aggregators of information and database vendors, such as EBSCOhost and ProQuest, facilitate advanced searches supported by specialist keyword thesauri. Searches of items through specialist databases are complementary to those through multidisciplinary research platforms, such as PubMed, Web of Science, and Google Scholar. Familiarizing with the functional characteristics of biomedical and nonbiomedical bibliographic search tools is mandatory for researchers, authors, editors, and publishers. The database users are offered updates of the indexed journal lists, abstracts, author profiles, and links to other metadata. Editors and publishers may find particularly useful source selection criteria and apply for coverage of their peer-reviewed journals and grey literature sources. These criteria are aimed at accepting relevant sources with established editorial policies and quality controls. PMID:27134485

  16. Crude Oil Analysis Database

    DOE Data Explorer

    Shay, Johanna Y.

    The composition and physical properties of crude oil vary widely from one reservoir to another within an oil field, as well as from one field or region to another. Although all oils consist of hydrocarbons and their derivatives, the proportions of various types of compounds differ greatly. This makes some oils more suitable than others for specific refining processes and uses. To take advantage of this diversity, one needs access to information in a large database of crude oil analyses. The Crude Oil Analysis Database (COADB) currently satisfies this need by offering 9,056 crude oil analyses. Of these, 8,500 are United States domestic oils. The database contains results of analysis of the general properties and chemical composition, as well as the field, formation, and geographic location of the crude oil sample. [Taken from the Introduction to COAMDATA_DESC.pdf, part of the zipped software and database file at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the zipped file to your PC. When opened, it will contain PDF documents and a large Excel spreadsheet. It will also contain the database in Microsoft Access 2002.

  17. The comprehensive peptaibiotics database.

    PubMed

    Stoppacher, Norbert; Neumann, Nora K N; Burgstaller, Lukas; Zeilinger, Susanne; Degenkolb, Thomas; Brückner, Hans; Schuhmacher, Rainer

    2013-05-01

    Peptaibiotics are nonribosomally biosynthesized peptides, which - according to definition - contain the marker amino acid α-aminoisobutyric acid (Aib) and possess antibiotic properties. Being known since 1958, a constantly increasing number of peptaibiotics have been described and investigated with a particular emphasis on hypocrealean fungi. Starting from the existing online 'Peptaibol Database', first published in 1997, an exhaustive literature survey of all known peptaibiotics was carried out and resulted in a list of 1043 peptaibiotics. The gathered information was compiled and used to create the new 'The Comprehensive Peptaibiotics Database', which is presented here. The database was devised as a software tool based on Microsoft (MS) Access. It is freely available from the internet at http://peptaibiotics-database.boku.ac.at and can easily be installed and operated on any computer offering a Windows XP/7 environment. It provides useful information on characteristic properties of the peptaibiotics included such as peptide category, group name of the microheterogeneous mixture to which the peptide belongs, amino acid sequence, sequence length, producing fungus, peptide subfamily, molecular formula, and monoisotopic mass. All these characteristics can be used and combined for automated search within the database, which makes The Comprehensive Peptaibiotics Database a versatile tool for the retrieval of valuable information about peptaibiotics. Sequence data have been considered as to December 14, 2012. PMID:23681723

  18. Drinking Water Database

    NASA Technical Reports Server (NTRS)

    Murray, ShaTerea R.

    2004-01-01

    This summer I had the opportunity to work in the Environmental Management Office (EMO) under the Chemical Sampling and Analysis Team or CS&AT. This team s mission is to support Glenn Research Center (GRC) and EM0 by providing chemical sampling and analysis services and expert consulting. Services include sampling and chemical analysis of water, soil, fbels, oils, paint, insulation materials, etc. One of this team s major projects is the Drinking Water Project. This is a project that is done on Glenn s water coolers and ten percent of its sink every two years. For the past two summers an intern had been putting together a database for this team to record the test they had perform. She had successfully created a database but hadn't worked out all the quirks. So this summer William Wilder (an intern from Cleveland State University) and I worked together to perfect her database. We began be finding out exactly what every member of the team thought about the database and what they would change if any. After collecting this data we both had to take some courses in Microsoft Access in order to fix the problems. Next we began looking at what exactly how the database worked from the outside inward. Then we began trying to change the database but we quickly found out that this would be virtually impossible.

  19. The Transporter Classification Database

    PubMed Central

    Saier, Milton H.; Reddy, Vamsee S.; Tamang, Dorjee G.; Västermark, Åke

    2014-01-01

    The Transporter Classification Database (TCDB; http://www.tcdb.org) serves as a common reference point for transport protein research. The database contains more than 10 000 non-redundant proteins that represent all currently recognized families of transmembrane molecular transport systems. Proteins in TCDB are organized in a five level hierarchical system, where the first two levels are the class and subclass, the second two are the family and subfamily, and the last one is the transport system. Superfamilies that contain multiple families are included as hyperlinks to the five tier TC hierarchy. TCDB includes proteins from all types of living organisms and is the only transporter classification system that is both universal and recognized by the International Union of Biochemistry and Molecular Biology. It has been expanded by manual curation, contains extensive text descriptions providing structural, functional, mechanistic and evolutionary information, is supported by unique software and is interconnected to many other relevant databases. TCDB is of increasing usefulness to the international scientific community and can serve as a model for the expansion of database technologies. This manuscript describes an update of the database descriptions previously featured in NAR database issues. PMID:24225317

  20. Specialist Bibliographic Databases

    PubMed Central

    2016-01-01

    Specialist bibliographic databases offer essential online tools for researchers and authors who work on specific subjects and perform comprehensive and systematic syntheses of evidence. This article presents examples of the established specialist databases, which may be of interest to those engaged in multidisciplinary science communication. Access to most specialist databases is through subscription schemes and membership in professional associations. Several aggregators of information and database vendors, such as EBSCOhost and ProQuest, facilitate advanced searches supported by specialist keyword thesauri. Searches of items through specialist databases are complementary to those through multidisciplinary research platforms, such as PubMed, Web of Science, and Google Scholar. Familiarizing with the functional characteristics of biomedical and nonbiomedical bibliographic search tools is mandatory for researchers, authors, editors, and publishers. The database users are offered updates of the indexed journal lists, abstracts, author profiles, and links to other metadata. Editors and publishers may find particularly useful source selection criteria and apply for coverage of their peer-reviewed journals and grey literature sources. These criteria are aimed at accepting relevant sources with established editorial policies and quality controls. PMID:27134485

  1. Development of Thin Section Zinc Die Casting Technology

    SciTech Connect

    Goodwin, Frank

    2013-10-31

    A new high fluidity zinc high pressure die casting alloy, termed the HF alloy, was developed during laboratory trials and proven in industrial production. The HF alloy permits castings to be achieved with section thicknesses of 0.3 mm or less. Technology transfer activities were conducted to develop usage of the HF high fluidity alloy. These included production of a brochure and a one-hour webinar on the HF alloy. The brochure was then sent to 1,184 product designers in the Interzinc database. There was excellent reception to this mailing, and from this initial contact 5 technology transfer seminars were conducted for 81 participants from 30 companies across a wide range of business sectors. Many of the successful applications to date involve high quality surface finishes. Design and manufacturing assistance was given for development of selected applications.

  2. What Do Patients With Hypertrophic Cardiomyopathy Die from?

    PubMed

    Maron, Barry J; Rowin, Ethan J; Casey, Susan A; Garberich, Ross F; Maron, Martin S

    2016-02-01

    Hypertrophic cardiomyopathy (HC) has become a contemporary and treatable genetic heart disease, now with disease-related mortality reduced to as low as 0.5% per year, based largely on more effective risk stratification and the use of the implantable cardioverter-defibrillator for primary prevention of sudden death. This paradigm change in the natural history of HC has caused us to reconsider the overall mortality risk in this disease. We interrogated the databases of 2 HC referral centers, Minneapolis Heart Institute and Tufts Medical Center. Of 1,902 consecutive patients evaluated between 1992 and 2013, 1,653 patients (87%) have survived to the end of follow-up and 249 patients (13%) have died. Most deaths (178 of 249; 72%) were unrelated to HC, commonly because of cancer and predominantly in older patients. Non-HC mortality was significantly more common in adults presenting ≥ 60 years and least common in the youngest patients aged <30 years (p <0.001). Notably, deaths from non-HC causes substantially exceeded HC-related causes by 2.6-fold (p <0.001). In conclusion, only about 25% of patients with HC ultimately died of their disease, including predominantly those who were <30 years of age. These data allow patients with HC to develop a more realistic and reassured perception of their disease. PMID:26718233

  3. Machine Tool User Cylindrical Die Rolling Performance Support System

    SciTech Connect

    Bohley, M.C.; Grothe, V.D.

    1998-08-06

    This project was initiated to provide the machine tool industry and the DOE a method for evaluating educating potential users about various aspects of the cylindrical die rolling process including: characteristics of the cylindrical die rolling processes, major productivity and material savings benefits, advantages for use in the fastener industry, production capabilities based on part parameters, and production capabilities based on machine specifications. AlliedSignal Federal Manufacturing and Technologies (ASFM and T) utilized data provided by Kinefac Corporation to develop an interactive performance support system. AlliedSignal developed one complete branch of the program and Kinefac will develop the remaining two branches. Macromedia Authorware version 3.5 and Microsoft Access version 7.0 were selected for development tools. These software tools maximize continued program development ease and program management with future machine technology advancements. Using this authoring tool and the external database resulted in development of a product that has many potential uses within the manufacturing industry. Source code for the product can be used as a template for other applications is reusable and can provide potential solutions to non-manufacturing needs. The final product will be released on CD-ROM.

  4. Great Basin paleontological database

    USGS Publications Warehouse

    Zhang, N.; Blodgett, R.B.; Hofstra, A.H.

    2008-01-01

    The U.S. Geological Survey has constructed a paleontological database for the Great Basin physiographic province that can be served over the World Wide Web for data entry, queries, displays, and retrievals. It is similar to the web-database solution that we constructed for Alaskan paleontological data (www.alaskafossil.org). The first phase of this effort was to compile a paleontological bibliography for Nevada and portions of adjacent states in the Great Basin that has recently been completed. In addition, we are also compiling paleontological reports (Known as E&R reports) of the U.S. Geological Survey, which are another extensive source of l,egacy data for this region. Initial population of the database benefited from a recently published conodont data set and is otherwise focused on Devonian and Mississippian localities because strata of this age host important sedimentary exhalative (sedex) Au, Zn, and barite resources and enormons Carlin-type An deposits. In addition, these strata are the most important petroleum source rocks in the region, and record the transition from extension to contraction associated with the Antler orogeny, the Alamo meteorite impact, and biotic crises associated with global oceanic anoxic events. The finished product will provide an invaluable tool for future geologic mapping, paleontological research, and mineral resource investigations in the Great Basin, making paleontological data acquired over nearly the past 150 yr readily available over the World Wide Web. A description of the structure of the database and the web interface developed for this effort are provided herein. This database is being used ws a model for a National Paleontological Database (which we am currently developing for the U.S. Geological Survey) as well as for other paleontological databases now being developed in other parts of the globe. ?? 2008 Geological Society of America.

  5. Chemical Explosion Database

    NASA Astrophysics Data System (ADS)

    Johansson, Peder; Brachet, Nicolas

    2010-05-01

    A database containing information on chemical explosions, recorded and located by the International Data Center (IDC) of the CTBTO, should be established in the IDC prior to entry into force of the CTBT. Nearly all of the large chemical explosions occur in connection with mining activity. As a first step towards the establishment of this database, a survey of presumed mining areas where sufficiently large explosions are conducted has been done. This is dominated by the large coal mining areas like the Powder River (U.S.), Kuznetsk (Russia), Bowen (Australia) and Ekibastuz (Kazakhstan) basins. There are also several other smaller mining areas, in e.g. Scandinavia, Poland, Kazakhstan and Australia, with large enough explosions for detection. Events in the Reviewed Event Bulletin (REB) of the IDC that are located in or close to these mining areas, and which therefore are candidates for inclusion in the database, have been investigated. Comparison with a database of infrasound events has been done as many mining blasts generate strong infrasound signals and therefore also are included in the infrasound database. Currently there are 66 such REB events in 18 mining areas in the infrasound database. On a yearly basis several hundreds of events in mining areas have been recorded and included in the REB. Establishment of the database of chemical explosions requires confirmation and ground truth information from the States Parties regarding these events. For an explosion reported in the REB, the appropriate authority in whose country the explosion occurred is encouraged, on a voluntary basis, to seek out information on the explosion and communicate this information to the IDC.

  6. Characteristics and dying trajectories of adult hospital patients from acute care wards who die following review by the rapid response team.

    PubMed

    Coombs, M A; Nelson, K; Psirides, A J; Suter, N; Pedersen, A

    2016-03-01

    A third of patients reviewed by rapid response teams (RRT) require end-of-life care. However, little is known about the characteristics and management of these patients following RRT review. This paper presents results of a retrospective, descriptive audit that explored the dying trajectory of adult ward inpatients who died outside of intensive care following RRT review. The study setting was a 430-bed tertiary New Zealand hospital during 2013. RRT, inpatient databases and hospital notes were used to identify 100 consecutive adult inpatients who died subsequent to RRT review. Outcome measures included time from RRT review to death, place of death, pre-existing co-morbidities and frequency of medical review. Results demonstrated that patients were old (median 77 years, IQR 63-85years), emergency admissions (n=100) and admitted under a medical specialty (n=71). All but one of the cohort had pre-existing co-morbidities (mean 3.2, SD 1.7), almost a third (n=31) had cancer and 51% had 1-4 previous inpatient admissions within the previous 12 months. The mean length of stay prior to RRT review was 4.9 days (SD 5.5) during which patients were frequently reviewed by senior medical staff (mean 6.8 times, SD 6.9, range 0-44). Twenty per cent of patients died after their first RRT review with a further 40% receiving treatment limitation/palliation. Fifty-two per cent of patients had a pre-existing DNAR. Eighty per cent of patients died in hospital. Whilst the RRT fulfils an unmet need in decision-making at end of life, there is a need to understand what RRT, instead of ward-based or palliative care teams, offers dying patients. PMID:27029659

  7. Solvent casting flow from slot die

    NASA Astrophysics Data System (ADS)

    Lee, Semi; Nam, Jaewook

    2015-11-01

    A continuous solvent casting method using a slot die can precisely control the film thickness by adjusting the operating conditions, such as the belt speed and pumping rate, not the liquid property. Therefore, it is a suitable method for high precision continuous film production. In this particular method, the dope, or casting solution, is pumped through the feed slot to form a short curtain between the die and the moving belt. Although this method is widely used in producing films for various applications, it is difficult to find indepth analyses of such flow. In this study, we developed a finite element computational model for the steady-state two-dimensional sovent casting flow from the slot die. The effect of die configurations, rheological properties and operating conditions on the behavior and shape of the gas/liquid interfaces and the location of the dynamic contact line, which is the place where the dope meets the moving belt, were investigated.

  8. Things to Do After Someone Dies

    MedlinePlus

    ... are usually hidden by clothing. What about organ donation? At some time before death or right after ... lungs, pancreas, kidneys, cornea, liver, and skin. Organ donation allows healthy organs from someone who dies to ...

  9. Reinforced ceramic dies for superplastic forming operations

    NASA Astrophysics Data System (ADS)

    Sanders, Daniel G.

    2004-12-01

    Ceramic dies have been developed to meet the need for a dimensionally stable tool, which can withstand the temperatures (425 to 950 °C) and high forming pressures (up to 7 MPa) that are required for superplastic forming (SPF), superplastic forming with diffusion bonding (SPF/DB), and hot sizing of metal parts. With the improvements that have been made to strengthen fused silica based ceramics, the performance of ceramic tools is slowly closing in on meeting the same forming complexity as corrosion-resistant steel (CRES) dies can achieve. Boeing has successfully superplastically formed jet engine wide chord fan blades using ceramic dies, and many production aircraft parts are being built with Boeing’s patented ceramic die technology.

  10. Casting Characteristics of Aluminum Die Casting Alloys

    SciTech Connect

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  11. Geobasisdaten für die Planung?

    NASA Astrophysics Data System (ADS)

    Zölitz-Möller, Reinhard

    2002-09-01

    Die Nutzer von Geobasisdaten der Vermessungs- und Katasterverwaltungen finden heute vor allem in ATKIS (Amtliches Topographisch-Kartographisches Informationssystem) und in der ALK (automatisiert geführte Liegenschaftskarte; hier noch eingeschränkt) flächendeckende und für eine Fachdatenintegration geeignete Geodatenbestände vor. Gleichwohl wird von Nutzerseite häufig ein differenziertes und in Teilen kritisches Bild gezeichnet. Die Kritik richtet sich v.a. auf die Probleme, die ATKIS-Anwender mit dem Nutzerkomfort, dem komplexen Datenmodell, unrichtigen Flächennutzungsangaben, inkompatiblen Objektdefinitionen, den Preisen sowie mangelnder Aktualität und Vollständigkeit haben. Dennoch gibt es für viele Zwecke auch in der Planung langfristig keine echte Alternative zu den Geobasisdaten.

  12. ADANS database specification

    SciTech Connect

    1997-01-16

    The purpose of the Air Mobility Command (AMC) Deployment Analysis System (ADANS) Database Specification (DS) is to describe the database organization and storage allocation and to provide the detailed data model of the physical design and information necessary for the construction of the parts of the database (e.g., tables, indexes, rules, defaults). The DS includes entity relationship diagrams, table and field definitions, reports on other database objects, and a description of the ADANS data dictionary. ADANS is the automated system used by Headquarters AMC and the Tanker Airlift Control Center (TACC) for airlift planning and scheduling of peacetime and contingency operations as well as for deliberate planning. ADANS also supports planning and scheduling of Air Refueling Events by the TACC and the unit-level tanker schedulers. ADANS receives input in the form of movement requirements and air refueling requests. It provides a suite of tools for planners to manipulate these requirements/requests against mobility assets and to develop, analyze, and distribute schedules. Analysis tools are provided for assessing the products of the scheduling subsystems, and editing capabilities support the refinement of schedules. A reporting capability provides formatted screen, print, and/or file outputs of various standard reports. An interface subsystem handles message traffic to and from external systems. The database is an integral part of the functionality summarized above.

  13. The Chandra Bibliography Database

    NASA Astrophysics Data System (ADS)

    Rots, A. H.; Winkelman, S. L.; Paltani, S.; Blecksmith, S. E.; Bright, J. D.

    2004-07-01

    Early in the mission, the Chandra Data Archive started the development of a bibliography database, tracking publications in refereed journals and on-line conference proceedings that are based on Chandra observations, allowing our users to link directly to articles in the ADS from our archive, and to link to the relevant data in the archive from the ADS entries. Subsequently, we have been working closely with the ADS and other data centers, in the context of the ADEC-ITWG, on standardizing the literature-data linking. We have also extended our bibliography database to include all Chandra-related articles and we are also keeping track of the number of citations of each paper. Obviously, in addition to providing valuable services to our users, this database allows us to extract a wide variety of statistical information. The project comprises five components: the bibliography database-proper, a maintenance database, an interactive maintenance tool, a user browsing interface, and a web services component for exchanging information with the ADS. All of these elements are nearly mission-independent and we intend make the package as a whole available for use by other data centers. The capabilities thus provided represent support for an essential component of the Virtual Observatory.

  14. Shuttle Hypervelocity Impact Database

    NASA Technical Reports Server (NTRS)

    Hyde, James L.; Christiansen, Eric L.; Lear, Dana M.

    2011-01-01

    With three missions outstanding, the Shuttle Hypervelocity Impact Database has nearly 3000 entries. The data is divided into tables for crew module windows, payload bay door radiators and thermal protection system regions, with window impacts compromising just over half the records. In general, the database provides dimensions of hypervelocity impact damage, a component level location (i.e., window number or radiator panel number) and the orbiter mission when the impact occurred. Additional detail on the type of particle that produced the damage site is provided when sampling data and definitive analysis results are available. Details and insights on the contents of the database including examples of descriptive statistics will be provided. Post flight impact damage inspection and sampling techniques that were employed during the different observation campaigns will also be discussed. Potential enhancements to the database structure and availability of the data for other researchers will be addressed in the Future Work section. A related database of returned surfaces from the International Space Station will also be introduced.

  15. Shuttle Hypervelocity Impact Database

    NASA Technical Reports Server (NTRS)

    Hyde, James I.; Christiansen, Eric I.; Lear, Dana M.

    2011-01-01

    With three flights remaining on the manifest, the shuttle impact hypervelocity database has over 2800 entries. The data is currently divided into tables for crew module windows, payload bay door radiators and thermal protection system regions, with window impacts compromising just over half the records. In general, the database provides dimensions of hypervelocity impact damage, a component level location (i.e., window number or radiator panel number) and the orbiter mission when the impact occurred. Additional detail on the type of particle that produced the damage site is provided when sampling data and definitive analysis results are available. The paper will provide details and insights on the contents of the database including examples of descriptive statistics using the impact data. A discussion of post flight impact damage inspection and sampling techniques that were employed during the different observation campaigns will be presented. Future work to be discussed will be possible enhancements to the database structure and availability of the data for other researchers. A related database of ISS returned surfaces that are under development will also be introduced.

  16. Using the Reactome Database

    PubMed Central

    Haw, Robin

    2012-01-01

    There is considerable interest in the bioinformatics community in creating pathway databases. The Reactome project (a collaboration between the Ontario Institute for Cancer Research, Cold Spring Harbor Laboratory, New York University Medical Center and the European Bioinformatics Institute) is one such pathway database and collects structured information on all the biological pathways and processes in the human. It is an expert-authored and peer-reviewed, curated collection of well-documented molecular reactions that span the gamut from simple intermediate metabolism to signaling pathways and complex cellular events. This information is supplemented with likely orthologous molecular reactions in mouse, rat, zebrafish, worm and other model organisms. This unit describes how to use the Reactome database to learn the steps of a biological pathway; navigate and browse through the Reactome database; identify the pathways in which a molecule of interest is involved; use the Pathway and Expression analysis tools to search the database for and visualize possible connections within user-supplied experimental data set and Reactome pathways; and the Species Comparison tool to compare human and model organism pathways. PMID:22700314

  17. FishTraits Database

    USGS Publications Warehouse

    Angermeier, Paul L.; Frimpong, Emmanuel A.

    2009-01-01

    The need for integrated and widely accessible sources of species traits data to facilitate studies of ecology, conservation, and management has motivated development of traits databases for various taxa. In spite of the increasing number of traits-based analyses of freshwater fishes in the United States, no consolidated database of traits of this group exists publicly, and much useful information on these species is documented only in obscure sources. The largely inaccessible and unconsolidated traits information makes large-scale analysis involving many fishes and/or traits particularly challenging. FishTraits is a database of >100 traits for 809 (731 native and 78 exotic) fish species found in freshwaters of the conterminous United States, including 37 native families and 145 native genera. The database contains information on four major categories of traits: (1) trophic ecology, (2) body size and reproductive ecology (life history), (3) habitat associations, and (4) salinity and temperature tolerances. Information on geographic distribution and conservation status is also included. Together, we refer to the traits, distribution, and conservation status information as attributes. Descriptions of attributes are available here. Many sources were consulted to compile attributes, including state and regional species accounts and other databases.

  18. NASA Records Database

    NASA Technical Reports Server (NTRS)

    Callac, Christopher; Lunsford, Michelle

    2005-01-01

    The NASA Records Database, comprising a Web-based application program and a database, is used to administer an archive of paper records at Stennis Space Center. The system begins with an electronic form, into which a user enters information about records that the user is sending to the archive. The form is smart : it provides instructions for entering information correctly and prompts the user to enter all required information. Once complete, the form is digitally signed and submitted to the database. The system determines which storage locations are not in use, assigns the user s boxes of records to some of them, and enters these assignments in the database. Thereafter, the software tracks the boxes and can be used to locate them. By use of search capabilities of the software, specific records can be sought by box storage locations, accession numbers, record dates, submitting organizations, or details of the records themselves. Boxes can be marked with such statuses as checked out, lost, transferred, and destroyed. The system can generate reports showing boxes awaiting destruction or transfer. When boxes are transferred to the National Archives and Records Administration (NARA), the system can automatically fill out NARA records-transfer forms. Currently, several other NASA Centers are considering deploying the NASA Records Database to help automate their records archives.

  19. Integrating Paleoecological Databases

    NASA Astrophysics Data System (ADS)

    Blois, Jessica; Goring, Simon; Smith, Alison

    2011-02-01

    Neotoma Consortium Workshop; Madison, Wisconsin, 23-26 September 2010 ; Paleoecology can contribute much to global change science, as paleontological records provide rich information about species range shifts, changes in vegetation composition and productivity, aquatic and terrestrial ecosystem responses to abrupt climate change, and paleoclimate reconstruction, for example. However, while paleoecology is increasingly a multidisciplinary, multiproxy field focused on biotic responses to global change, most paleo databases focus on single-proxy groups. The Neotoma Paleoecology Database (http://www.neotomadb.org) aims to remedy this limitation by integrating discipline-specific databases to facilitate cross-community queries and analyses. In September, Neotoma consortium members and representatives from other databases and data communities met at the University of Wisconsin-Madison to launch the second development phase of Neotoma. The workshop brought together 54 international specialists, including Neotoma data stewards, users, and developers. Goals for the meeting were fourfold: (1) develop working plans for existing data communities; (2) identify new data types and sources; (3) enhance data access, visualization, and analysis on the Neotoma Web site; and (4) coordinate with other databases and cooperate in tool development and sharing.

  20. VIEWCACHE: An incremental database access method for autonomous interoperable databases

    NASA Technical Reports Server (NTRS)

    Roussopoulos, Nick; Sellis, Timoleon

    1991-01-01

    The objective is to illustrate the concept of incremental access to distributed databases. An experimental database management system, ADMS, which has been developed at the University of Maryland, in College Park, uses VIEWCACHE, a database access method based on incremental search. VIEWCACHE is a pointer-based access method that provides a uniform interface for accessing distributed databases and catalogues. The compactness of the pointer structures formed during database browsing and the incremental access method allow the user to search and do inter-database cross-referencing with no actual data movement between database sites. Once the search is complete, the set of collected pointers pointing to the desired data are dereferenced.

  1. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  2. Thick film silicon growth techniques. [die materials

    NASA Technical Reports Server (NTRS)

    Bates, H. E.; Mlavsky, A. I.; Jewett, D. N.; White, V. E.

    1973-01-01

    The research which was directed toward finding an improved die material is reported. Wetting experiments were conducted with various materials to determine their compatibility with silicon. Work has also continued toward the development of quartz as a die material as new techniques have provided more optimistic results than observed in the past. As a result of the thermal modification previously described, improvements in growth stability have contributed to an increase in ribbon quality.

  3. Manufacture of die casting dies by hot isostatic pressing. CRADA final report

    SciTech Connect

    Viswanathan, S.; Ren, W.; Luk, K.; Brucher, H.G.

    1998-09-01

    The reason for this Cooperative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory (ORNL) and Doehler-Jarvis was to investigate the manufacture die-casting dies with internal water-cooling lines by hot-isostatic pressing (HIPing) of H13 tool steel powder. The use of HIPing will allow the near-net-shape manufacture of dies and the strategic placement of water-cooling lines during manufacture. The production of near-net-shape dies by HIPing involves the generation of HIPing diagrams, the design of the can that can be used for HIPing a die with complex details, strategic placement of water-cooling lines in the die, computer modeling to predict movement of the water lines during HIPing, and the development of strategies for placing water lines in the appropriate locations. The results presented include a literature review, particle analysis and characterization of H13 tool steel powder, and modeling of the HIPing process.

  4. Open Geoscience Database

    NASA Astrophysics Data System (ADS)

    Bashev, A.

    2012-04-01

    Currently there is an enormous amount of various geoscience databases. Unfortunately the only users of the majority of the databases are their elaborators. There are several reasons for that: incompaitability, specificity of tasks and objects and so on. However the main obstacles for wide usage of geoscience databases are complexity for elaborators and complication for users. The complexity of architecture leads to high costs that block the public access. The complication prevents users from understanding when and how to use the database. Only databases, associated with GoogleMaps don't have these drawbacks, but they could be hardly named "geoscience" Nevertheless, open and simple geoscience database is necessary at least for educational purposes (see our abstract for ESSI20/EOS12). We developed a database and web interface to work with them and now it is accessible at maps.sch192.ru. In this database a result is a value of a parameter (no matter which) in a station with a certain position, associated with metadata: the date when the result was obtained; the type of a station (lake, soil etc); the contributor that sent the result. Each contributor has its own profile, that allows to estimate the reliability of the data. The results can be represented on GoogleMaps space image as a point in a certain position, coloured according to the value of the parameter. There are default colour scales and each registered user can create the own scale. The results can be also extracted in *.csv file. For both types of representation one could select the data by date, object type, parameter type, area and contributor. The data are uploaded in *.csv format: Name of the station; Lattitude(dd.dddddd); Longitude(ddd.dddddd); Station type; Parameter type; Parameter value; Date(yyyy-mm-dd). The contributor is recognised while entering. This is the minimal set of features that is required to connect a value of a parameter with a position and see the results. All the complicated data

  5. Protein Structure Databases.

    PubMed

    Laskowski, Roman A

    2016-01-01

    Web-based protein structure databases come in a wide variety of types and levels of information content. Those having the most general interest are the various atlases that describe each experimentally determined protein structure and provide useful links, analyses, and schematic diagrams relating to its 3D structure and biological function. Also of great interest are the databases that classify 3D structures by their folds as these can reveal evolutionary relationships which may be hard to detect from sequence comparison alone. Related to these are the numerous servers that compare folds-particularly useful for newly solved structures, and especially those of unknown function. Beyond these are a vast number of databases for the more specialized user, dealing with specific families, diseases, structural features, and so on. PMID:27115626

  6. Cytochrome P450 database.

    PubMed

    Lisitsa, A V; Gusev, S A; Karuzina, I I; Archakov, A I; Koymans, L

    2001-01-01

    This paper describes a specialized database dedicated exclusively to the cytochrome P450 superfamily. The system provides the impression of superfamily's nomenclature and describes structure and function of different P450 enzymes. Information on P450-catalyzed reactions, substrate preferences, peculiarities of induction and inhibition is available through the database management system. Also the source genes and appropriate translated proteins can be retrieved together with corresponding literature references. Developed programming solution provides the flexible interface for browsing, searching, grouping and reporting the information. Local version of database manager and required data files are distributed on a compact disk. Besides, there is a network version of the software available on Internet. The network version implies the original mechanism, which is useful for the permanent online extension of the data scope. PMID:11769119

  7. Mouse genome database 2016

    PubMed Central

    Bult, Carol J.; Eppig, Janan T.; Blake, Judith A.; Kadin, James A.; Richardson, Joel E.

    2016-01-01

    The Mouse Genome Database (MGD; http://www.informatics.jax.org) is the primary community model organism database for the laboratory mouse and serves as the source for key biological reference data related to mouse genes, gene functions, phenotypes and disease models with a strong emphasis on the relationship of these data to human biology and disease. As the cost of genome-scale sequencing continues to decrease and new technologies for genome editing become widely adopted, the laboratory mouse is more important than ever as a model system for understanding the biological significance of human genetic variation and for advancing the basic research needed to support the emergence of genome-guided precision medicine. Recent enhancements to MGD include new graphical summaries of biological annotations for mouse genes, support for mobile access to the database, tools to support the annotation and analysis of sets of genes, and expanded support for comparative biology through the expansion of homology data. PMID:26578600

  8. National Ambient Radiation Database

    SciTech Connect

    Dziuban, J.; Sears, R.

    2003-02-25

    The U.S. Environmental Protection Agency (EPA) recently developed a searchable database and website for the Environmental Radiation Ambient Monitoring System (ERAMS) data. This site contains nationwide radiation monitoring data for air particulates, precipitation, drinking water, surface water and pasteurized milk. This site provides location-specific as well as national information on environmental radioactivity across several media. It provides high quality data for assessing public exposure and environmental impacts resulting from nuclear emergencies and provides baseline data during routine conditions. The database and website are accessible at www.epa.gov/enviro/. This site contains (1) a query for the general public which is easy to use--limits the amount of information provided, but includes the ability to graph the data with risk benchmarks and (2) a query for a more technical user which allows access to all of the data in the database, (3) background information on ER AMS.

  9. Mouse genome database 2016.

    PubMed

    Bult, Carol J; Eppig, Janan T; Blake, Judith A; Kadin, James A; Richardson, Joel E

    2016-01-01

    The Mouse Genome Database (MGD; http://www.informatics.jax.org) is the primary community model organism database for the laboratory mouse and serves as the source for key biological reference data related to mouse genes, gene functions, phenotypes and disease models with a strong emphasis on the relationship of these data to human biology and disease. As the cost of genome-scale sequencing continues to decrease and new technologies for genome editing become widely adopted, the laboratory mouse is more important than ever as a model system for understanding the biological significance of human genetic variation and for advancing the basic research needed to support the emergence of genome-guided precision medicine. Recent enhancements to MGD include new graphical summaries of biological annotations for mouse genes, support for mobile access to the database, tools to support the annotation and analysis of sets of genes, and expanded support for comparative biology through the expansion of homology data. PMID:26578600

  10. ARTI Refrigerant Database

    SciTech Connect

    Calm, J.M.

    1992-04-30

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air- conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on R-32, R-123, R-124, R- 125, R-134a, R-141b, R142b, R-143a, R-152a, R-290 (propane), R-717 (ammonia), ethers, and others as well as azeotropic and zeotropic blends of these fluids. It addresses polyalkylene glycol (PAG), ester, and other lubricants. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits.

  11. The PROSITE database.

    PubMed

    Hulo, Nicolas; Bairoch, Amos; Bulliard, Virginie; Cerutti, Lorenzo; De Castro, Edouard; Langendijk-Genevaux, Petra S; Pagni, Marco; Sigrist, Christian J A

    2006-01-01

    The PROSITE database consists of a large collection of biologically meaningful signatures that are described as patterns or profiles. Each signature is linked to a documentation that provides useful biological information on the protein family, domain or functional site identified by the signature. The PROSITE database is now complemented by a series of rules that can give more precise information about specific residues. During the last 2 years, the documentation and the ScanProsite web pages were redesigned to add more functionalities. The latest version of PROSITE (release 19.11 of September 27, 2005) contains 1329 patterns and 552 profile entries. Over the past 2 years more than 200 domains have been added, and now 52% of UniProtKB/Swiss-Prot entries (release 48.1 of September 27, 2005) have a cross-reference to a PROSITE entry. The database is accessible at http://www.expasy.org/prosite/. PMID:16381852

  12. The PROSITE database

    PubMed Central

    Hulo, Nicolas; Bairoch, Amos; Bulliard, Virginie; Cerutti, Lorenzo; De Castro, Edouard; Langendijk-Genevaux, Petra S.; Pagni, Marco; Sigrist, Christian J. A.

    2006-01-01

    The PROSITE database consists of a large collection of biologically meaningful signatures that are described as patterns or profiles. Each signature is linked to a documentation that provides useful biological information on the protein family, domain or functional site identified by the signature. The PROSITE database is now complemented by a series of rules that can give more precise information about specific residues. During the last 2 years, the documentation and the ScanProsite web pages were redesigned to add more functionalities. The latest version of PROSITE (release 19.11 of September 27, 2005) contains 1329 patterns and 552 profile entries. Over the past 2 years more than 200 domains have been added, and now 52% of UniProtKB/Swiss-Prot entries (release 48.1 of September 27, 2005) have a cross-reference to a PROSITE entry. The database is accessible at . PMID:16381852

  13. The Neotoma Paleoecology Database

    NASA Astrophysics Data System (ADS)

    Grimm, E. C.; Ashworth, A. C.; Barnosky, A. D.; Betancourt, J. L.; Bills, B.; Booth, R.; Blois, J.; Charles, D. F.; Graham, R. W.; Goring, S. J.; Hausmann, S.; Smith, A. J.; Williams, J. W.; Buckland, P.

    2015-12-01

    The Neotoma Paleoecology Database (www.neotomadb.org) is a multiproxy, open-access, relational database that includes fossil data for the past 5 million years (the late Neogene and Quaternary Periods). Modern distributional data for various organisms are also being made available for calibration and paleoecological analyses. The project is a collaborative effort among individuals from more than 20 institutions worldwide, including domain scientists representing a spectrum of Pliocene-Quaternary fossil data types, as well as experts in information technology. Working groups are active for diatoms, insects, ostracodes, pollen and plant macroscopic remains, testate amoebae, rodent middens, vertebrates, age models, geochemistry and taphonomy. Groups are also active in developing online tools for data analyses and for developing modules for teaching at different levels. A key design concept of NeotomaDB is that stewards for various data types are able to remotely upload and manage data. Cooperatives for different kinds of paleo data, or from different regions, can appoint their own stewards. Over the past year, much progress has been made on development of the steward software-interface that will enable this capability. The steward interface uses web services that provide access to the database. More generally, these web services enable remote programmatic access to the database, which both desktop and web applications can use and which provide real-time access to the most current data. Use of these services can alleviate the need to download the entire database, which can be out-of-date as soon as new data are entered. In general, the Neotoma web services deliver data either from an entire table or from the results of a view. Upon request, new web services can be quickly generated. Future developments will likely expand the spatial and temporal dimensions of the database. NeotomaDB is open to receiving new datasets and stewards from the global Quaternary community

  14. Database Management System

    NASA Technical Reports Server (NTRS)

    1990-01-01

    In 1981 Wayne Erickson founded Microrim, Inc, a company originally focused on marketing a microcomputer version of RIM (Relational Information Manager). Dennis Comfort joined the firm and is now vice president, development. The team developed an advanced spinoff from the NASA system they had originally created, a microcomputer database management system known as R:BASE 4000. Microrim added many enhancements and developed a series of R:BASE products for various environments. R:BASE is now the second largest selling line of microcomputer database management software in the world.

  15. The Genopolis Microarray Database

    PubMed Central

    Splendiani, Andrea; Brandizi, Marco; Even, Gael; Beretta, Ottavio; Pavelka, Norman; Pelizzola, Mattia; Mayhaus, Manuel; Foti, Maria; Mauri, Giancarlo; Ricciardi-Castagnoli, Paola

    2007-01-01

    Background Gene expression databases are key resources for microarray data management and analysis and the importance of a proper annotation of their content is well understood. Public repositories as well as microarray database systems that can be implemented by single laboratories exist. However, there is not yet a tool that can easily support a collaborative environment where different users with different rights of access to data can interact to define a common highly coherent content. The scope of the Genopolis database is to provide a resource that allows different groups performing microarray experiments related to a common subject to create a common coherent knowledge base and to analyse it. The Genopolis database has been implemented as a dedicated system for the scientific community studying dendritic and macrophage cells functions and host-parasite interactions. Results The Genopolis Database system allows the community to build an object based MIAME compliant annotation of their experiments and to store images, raw and processed data from the Affymetrix GeneChip® platform. It supports dynamical definition of controlled vocabularies and provides automated and supervised steps to control the coherence of data and annotations. It allows a precise control of the visibility of the database content to different sub groups in the community and facilitates exports of its content to public repositories. It provides an interactive users interface for data analysis: this allows users to visualize data matrices based on functional lists and sample characterization, and to navigate to other data matrices defined by similarity of expression values as well as functional characterizations of genes involved. A collaborative environment is also provided for the definition and sharing of functional annotation by users. Conclusion The Genopolis Database supports a community in building a common coherent knowledge base and analyse it. This fills a gap between a local

  16. JICST Factual Database(1)

    NASA Astrophysics Data System (ADS)

    Kurosawa, Shinji

    The outline of JICST factual database (JOIS-F), which JICST has started from January, 1988, and its online service are described in this paper. First, the author mentions the circumstances from 1973, when its planning was started, to the present, and its relation to "Project by Special Coordination Founds for Promoting Science and Technology". Secondly, databases, which are now under development aiming to start its services from fiscal 1988 or fiscal 1989, of DNA, metallic material intensity, crystal structure, chemical substance regulations, and so forth, are described. Lastly, its online service is briefly explained.

  17. The Ribosomal Database Project.

    PubMed Central

    Maidak, B L; Larsen, N; McCaughey, M J; Overbeek, R; Olsen, G J; Fogel, K; Blandy, J; Woese, C R

    1994-01-01

    The Ribosomal Database Project (RDP) is a curated database that offers ribosome-related data, analysis services, and associated computer programs. The offerings include phylogenetically ordered alignments of ribosomal RNA (rRNA) sequences, derived phylogenetic trees, rRNA secondary structure diagrams, and various software for handling, analyzing and displaying alignments and trees. The data are available via anonymous ftp (rdp.life.uiuc.edu), electronic mail (server/rdp.life.uiuc.edu) and gopher (rdpgopher.life.uiuc.edu). The electronic mail server also provides ribosomal probe checking, approximate phylogenetic placement of user-submitted sequences, screening for chimeric nature of newly sequenced rRNAs, and automated alignment. PMID:7524021

  18. DataBase on Demand

    NASA Astrophysics Data System (ADS)

    Gaspar Aparicio, R.; Gomez, D.; Coterillo Coz, I.; Wojcik, D.

    2012-12-01

    At CERN a number of key database applications are running on user-managed MySQL database services. The database on demand project was born out of an idea to provide the CERN user community with an environment to develop and run database services outside of the actual centralised Oracle based database services. The Database on Demand (DBoD) empowers the user to perform certain actions that had been traditionally done by database administrators, DBA's, providing an enterprise platform for database applications. It also allows the CERN user community to run different database engines, e.g. presently open community version of MySQL and single instance Oracle database server. This article describes a technology approach to face this challenge, a service level agreement, the SLA that the project provides, and an evolution of possible scenarios.

  19. Celestial Fireworks from Dying Stars

    NASA Astrophysics Data System (ADS)

    2011-04-01

    This image of the nebula NGC 3582, which was captured by the Wide Field Imager on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile, shows giant loops of gas bearing a striking resemblance to solar prominences. These loops are thought to have been ejected by dying stars, but new stars are also being born within this stellar nursery. These energetic youngsters emit intense ultraviolet radiation that makes the gas in the nebula glow, producing the fiery display shown here. NGC 3582 is part of a large star-forming region in the Milky Way, called RCW 57. It lies close to the central plane of the Milky Way in the southern constellation of Carina (The Keel of Jason's ship, the Argo). John Herschel first saw this complex region of glowing gas and dark dust clouds in 1834, during his stay in South Africa. Some of the stars forming in regions like NGC 3582 are much heavier than the Sun. These monster stars emit energy at prodigious rates and have very short lives that end in explosions as supernovae. The material ejected from these dramatic events creates bubbles in the surrounding gas and dust. This is the probable cause of the loops visible in this picture. This image was taken through multiple filters. From the Wide Field Imager, data taken through a red filter are shown in green and red, and data taken through a filter that isolates the red glow characteristic of hydrogen are also shown in red. Additional infrared data from the Digitized Sky Survey are shown in blue. The image was processed by ESO using the observational data identified by Joe DePasquale, from the United States [1], who participated in ESO's Hidden Treasures 2010 astrophotography competition [2]. The competition was organised by ESO in October-November 2010, for everyone who enjoys making beautiful images of the night sky using astronomical data obtained using professional telescopes. Notes [1] Joe searched through ESO's archive and identified datasets that he used to compose his

  20. The CEBAF Element Database

    SciTech Connect

    Theodore Larrieu, Christopher Slominski, Michele Joyce

    2011-03-01

    With the inauguration of the CEBAF Element Database (CED) in Fall 2010, Jefferson Lab computer scientists have taken a step toward the eventual goal of a model-driven accelerator. Once fully populated, the database will be the primary repository of information used for everything from generating lattice decks to booting control computers to building controls screens. A requirement influencing the CED design is that it provide access to not only present, but also future and past configurations of the accelerator. To accomplish this, an introspective database schema was designed that allows new elements, types, and properties to be defined on-the-fly with no changes to table structure. Used in conjunction with Oracle Workspace Manager, it allows users to query data from any time in the database history with the same tools used to query the present configuration. Users can also check-out workspaces to use as staging areas for upcoming machine configurations. All Access to the CED is through a well-documented Application Programming Interface (API) that is translated automatically from original C++ source code into native libraries for scripting languages such as perl, php, and TCL making access to the CED easy and ubiquitous.

  1. GENERAL PERMITS DATABASE

    EPA Science Inventory

    Resource Purpose:This database was used to provide permit writers with a library of examples for writing general permits. It has not been maintained and is outdated and will be removed. Water Permits Division is trying to determine whether or not to recreate this databas...

  2. Triatomic Spectral Database

    National Institute of Standards and Technology Data Gateway

    SRD 117 Triatomic Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 55 triatomic molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty and reference are given for each transition reported.

  3. Hydrocarbon Spectral Database

    National Institute of Standards and Technology Data Gateway

    SRD 115 Hydrocarbon Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 91 hydrocarbon molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty and reference are given for each transition reported.

  4. Redis database administration tool

    Energy Science and Technology Software Center (ESTSC)

    2013-02-13

    MyRedis is a product of the Lorenz subproject under the ASC Scirntific Data Management effort. MyRedis is a web based utility designed to allow easy administration of instances of Redis databases. It can be usedd to view and manipulate data as well as run commands directly against a variety of different Redis hosts.

  5. NATIONAL NUTRIENTS DATABASE

    EPA Science Inventory

    Resource Purpose:The Nutrient Criteria Program has initiated development of a National relational database application that will be used to store and analyze nutrient data. The ultimate use of these data will be to derive ecoregion- and waterbody-specific numeric nutrient...

  6. NATIONAL ASSESSMENT DATABASE (NAD)

    EPA Science Inventory

    Resource Purpose:The National Assessment Database stores State water quality assessments that are reported under Section 305(b) of the Clean Water Act. The data are stored by individual water quality assessments. Threatened, partially and not supporting waters also have da...

  7. Patent Family Databases.

    ERIC Educational Resources Information Center

    Simmons, Edlyn S.

    1985-01-01

    Reports on retrieval of patent information online and includes definition of patent family, basic and equivalent patents, "parents and children" applications, designated states, patent family databases--International Patent Documentation Center, World Patents Index, APIPAT (American Petroleum Institute), CLAIMS (IFI/Plenum). A table noting country…

  8. The Exoplanet Orbit Database

    NASA Astrophysics Data System (ADS)

    Wright, J. T.; Fakhouri, O.; Marcy, G. W.; Han, E.; Feng, Y.; Johnson, John Asher; Howard, A. W.; Fischer, D. A.; Valenti, J. A.; Anderson, J.; Piskunov, N.

    2011-04-01

    We present a database of well-determined orbital parameters of exoplanets, and their host stars' properties. This database comprises spectroscopic orbital elements measured for 427 planets orbiting 363 stars from radial velocity and transit measurements as reported in the literature. We have also compiled fundamental transit parameters, stellar parameters, and the method used for the planets discovery. This Exoplanet Orbit Database includes all planets with robust, well measured orbital parameters reported in peer-reviewed articles. The database is available in a searchable, filterable, and sortable form online through the Exoplanets Data Explorer table, and the data can be plotted and explored through the Exoplanet Data Explorer plotter. We use the Data Explorer to generate publication-ready plots, giving three examples of the signatures of exoplanet migration and dynamical evolution: We illustrate the character of the apparent correlation between mass and period in exoplanet orbits, the different selection biases between radial velocity and transit surveys, and that the multiplanet systems show a distinct semimajor-axis distribution from apparently singleton systems.

  9. High Performance Buildings Database

    DOE Data Explorer

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  10. NATIONAL CONTAMINANT OCCURRENCE DATABASE

    EPA Science Inventory

    Resource Purpose:Under the 1996 Safe Drinking Water Act Amendments, EPA is to assemble a National Drinking Water Occurrence Database (NCOD) by August 1999. The NCOD is a collection of data of documented quality on unregulated and regulated chemical, radiological, microbia...

  11. Database Technologies for RDF

    NASA Astrophysics Data System (ADS)

    Das, Souripriya; Srinivasan, Jagannathan

    Efficient and scalable support for RDF/OWL data storage, loading, inferencing and querying, in conjunction with already available support for enterprise level data and operations reliability requirements, can make databases suitable to act as enterprise-level RDF/OWL repository and hence become a viable platform for building semantic applications for the enterprise environments.

  12. Biomedical term mapping databases.

    PubMed

    Wren, Jonathan D; Chang, Jeffrey T; Pustejovsky, James; Adar, Eytan; Garner, Harold R; Altman, Russ B

    2005-01-01

    Longer words and phrases are frequently mapped onto a shorter form such as abbreviations or acronyms for efficiency of communication. These abbreviations are pervasive in all aspects of biology and medicine and as the amount of biomedical literature grows, so does the number of abbreviations and the average number of definitions per abbreviation. Even more confusing, different authors will often abbreviate the same word/phrase differently. This ambiguity impedes our ability to retrieve information, integrate databases and mine textual databases for content. Efforts to standardize nomenclature, especially those doing so retrospectively, need to be aware of different abbreviatory mappings and spelling variations. To address this problem, there have been several efforts to develop computer algorithms to identify the mapping of terms between short and long form within a large body of literature. To date, four such algorithms have been applied to create online databases that comprehensively map biomedical terms and abbreviations within MEDLINE: ARGH (http://lethargy.swmed.edu/ARGH/argh.asp), the Stanford Biomedical Abbreviation Server (http://bionlp.stanford.edu/abbreviation/), AcroMed (http://medstract.med.tufts.edu/acro1.1/index.htm) and SaRAD (http://www.hpl.hp.com/research/idl/projects/abbrev.html). In addition to serving as useful computational tools, these databases serve as valuable references that help biologists keep up with an ever-expanding vocabulary of terms. PMID:15608198

  13. The Indra Simulation Database

    NASA Astrophysics Data System (ADS)

    Falck, Bridget; Budavari, T.; Cole, S.; Crankshaw, D.; Dobos, L.; Lemson, G.; Neyrinck, M.; Szalay, A.; Wang, J.

    2011-05-01

    We present the Indra suite of cosmological N-body simulations and the design of its companion database. Indra consists of 512 different instances of a 1 Gpc/h-sided box, each with 100 million dark matter particles and the same input cosmology, enabling a characterization of very large-scale modes of the matter power spectrum with galaxy-scale mass resolution and an excellent handle on cosmic variance. Each simulation outputs 64 snapshots, giving over 100 TB of data for the full set of simulations, all of which will be loaded into a SQL database. We discuss the database design for the particle data, consisting of the positions and velocities of each particle; the FOF halos, with links to the particle data so that halo properties can be calculated within the database; and the density field on a power-of-two grid, which can be easily linked to each particle's Peano-Hilbert index. Initial performance tests and example queries will be given. The authors are grateful for support from the Gordon and Betty Moore and the W.M. Keck Foundations.

  14. Diatomic Spectral Database

    National Institute of Standards and Technology Data Gateway

    SRD 114 Diatomic Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 121 diatomic molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty, and reference are given for each transition reported.

  15. Databases and data mining

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Over the course of the past decade, the breadth of information that is made available through online resources for plant biology has increased astronomically, as have the interconnectedness among databases, online tools, and methods of data acquisition and analysis. For maize researchers, the numbe...

  16. Weathering Database Technology

    ERIC Educational Resources Information Center

    Snyder, Robert

    2005-01-01

    Collecting weather data is a traditional part of a meteorology unit at the middle level. However, making connections between the data and weather conditions can be a challenge. One way to make these connections clearer is to enter the data into a database. This allows students to quickly compare different fields of data and recognize which…

  17. The Ribosomal Database Project

    PubMed Central

    Olsen, Gary J.; Overbeek, Ross; Larsen, Niels; Marsh, Terry L.; McCaughey, Michael J.; Maciukenas, Michael A.; Kuan, Wen-Min; Macke, Thomas J.; Xing, Yuqing; Woese, Carl R.

    1992-01-01

    The Ribosomal Database Project (RDP) compiles ribosomal sequences and related data, and redistributes them in aligned and phylogenetically ordered form to its user community. It also offers various software packages for handling, analyzing and displaying sequences. In addition, the RDP offers (or will offer) certain analytic services. At present the project is in an intermediate stage of development. PMID:1598241

  18. LQTS gene LOVD database.

    PubMed

    Zhang, Tao; Moss, Arthur; Cong, Peikuan; Pan, Min; Chang, Bingxi; Zheng, Liangrong; Fang, Quan; Zareba, Wojciech; Robinson, Jennifer; Lin, Changsong; Li, Zhongxiang; Wei, Junfang; Zeng, Qiang; Qi, Ming

    2010-11-01

    The Long QT Syndrome (LQTS) is a group of genetically heterogeneous disorders that predisposes young individuals to ventricular arrhythmias and sudden death. LQTS is mainly caused by mutations in genes encoding subunits of cardiac ion channels (KCNQ1, KCNH2,SCN5A, KCNE1, and KCNE2). Many other genes involved in LQTS have been described recently(KCNJ2, AKAP9, ANK2, CACNA1C, SCNA4B, SNTA1, and CAV3). We created an online database(http://www.genomed.org/LOVD/introduction.html) that provides information on variants in LQTS-associated genes. As of February 2010, the database contains 1738 unique variants in 12 genes. A total of 950 variants are considered pathogenic, 265 are possible pathogenic, 131 are unknown/unclassified, and 292 have no known pathogenicity. In addition to these mutations collected from published literature, we also submitted information on gene variants, including one possible novel pathogenic mutation in the KCNH2 splice site found in ten Chinese families with documented arrhythmias. The remote user is able to search the data and is encouraged to submit new mutations into the database. The LQTS database will become a powerful tool for both researchers and clinicians. PMID:20809527

  19. LHCb distributed conditions database

    NASA Astrophysics Data System (ADS)

    Clemencic, M.

    2008-07-01

    The LHCb Conditions Database project provides the necessary tools to handle non-event time-varying data. The main users of conditions are reconstruction and analysis processes, which are running on the Grid. To allow efficient access to the data, we need to use a synchronized replica of the content of the database located at the same site as the event data file, i.e. the LHCb Tier1. The replica to be accessed is selected from information stored on LFC (LCG File Catalog) and managed with the interface provided by the LCG developed library CORAL. The plan to limit the submission of jobs to those sites where the required conditions are available will also be presented. LHCb applications are using the Conditions Database framework on a production basis since March 2007. We have been able to collect statistics on the performance and effectiveness of both the LCG library COOL (the library providing conditions handling functionalities) and the distribution framework itself. Stress tests on the CNAF hosted replica of the Conditions Database have been performed and the results will be summarized here.

  20. WETLANDS TREATMENT DATABASE

    EPA Science Inventory

    The U.S. EPA sponsored a project to collect and catalog information from wastewater treatment wetlands into a computer database. PA has also written a user friendly, stand-alone, menu-driven computer program to allow anyone with DOS 3.3 or higher to access the information in the ...

  1. ECOREGION SPATIAL DATABASE

    EPA Science Inventory

    This spatial database contains boundaries and attributes describing Level III ecoregions in EPA Region 8. The ecoregions shown here have been derived from Omernik (1987) and from refinements of Omernik's framework that have been made for other projects. These ongoing or re...

  2. The AMMA database

    NASA Astrophysics Data System (ADS)

    Boichard, Jean-Luc; Brissebrat, Guillaume; Cloche, Sophie; Eymard, Laurence; Fleury, Laurence; Mastrorillo, Laurence; Moulaye, Oumarou; Ramage, Karim

    2010-05-01

    The AMMA project includes aircraft, ground-based and ocean measurements, an intensive use of satellite data and diverse modelling studies. Therefore, the AMMA database aims at storing a great amount and a large variety of data, and at providing the data as rapidly and safely as possible to the AMMA research community. In order to stimulate the exchange of information and collaboration between researchers from different disciplines or using different tools, the database provides a detailed description of the products and uses standardized formats. The AMMA database contains: - AMMA field campaigns datasets; - historical data in West Africa from 1850 (operational networks and previous scientific programs); - satellite products from past and future satellites, (re-)mapped on a regular latitude/longitude grid and stored in NetCDF format (CF Convention); - model outputs from atmosphere or ocean operational (re-)analysis and forecasts, and from research simulations. The outputs are processed as the satellite products are. Before accessing the data, any user has to sign the AMMA data and publication policy. This chart only covers the use of data in the framework of scientific objectives and categorically excludes the redistribution of data to third parties and the usage for commercial applications. Some collaboration between data producers and users, and the mention of the AMMA project in any publication is also required. The AMMA database and the associated on-line tools have been fully developed and are managed by two teams in France (IPSL Database Centre, Paris and OMP, Toulouse). Users can access data of both data centres using an unique web portal. This website is composed of different modules : - Registration: forms to register, read and sign the data use chart when an user visits for the first time - Data access interface: friendly tool allowing to build a data extraction request by selecting various criteria like location, time, parameters... The request can

  3. JDD, Inc. Database

    NASA Technical Reports Server (NTRS)

    Miller, David A., Jr.

    2004-01-01

    JDD Inc, is a maintenance and custodial contracting company whose mission is to provide their clients in the private and government sectors "quality construction, construction management and cleaning services in the most efficient and cost effective manners, (JDD, Inc. Mission Statement)." This company provides facilities support for Fort Riley in Fo,rt Riley, Kansas and the NASA John H. Glenn Research Center at Lewis Field here in Cleveland, Ohio. JDD, Inc. is owned and operated by James Vaughn, who started as painter at NASA Glenn and has been working here for the past seventeen years. This summer I worked under Devan Anderson, who is the safety manager for JDD Inc. in the Logistics and Technical Information Division at Glenn Research Center The LTID provides all transportation, secretarial, security needs and contract management of these various services for the center. As a safety manager, my mentor provides Occupational Health and Safety Occupation (OSHA) compliance to all JDD, Inc. employees and handles all other issues (Environmental Protection Agency issues, workers compensation, safety and health training) involving to job safety. My summer assignment was not as considered "groundbreaking research" like many other summer interns have done in the past, but it is just as important and beneficial to JDD, Inc. I initially created a database using a Microsoft Excel program to classify and categorize data pertaining to numerous safety training certification courses instructed by our safety manager during the course of the fiscal year. This early portion of the database consisted of only data (training field index, employees who were present at these training courses and who was absent) from the training certification courses. Once I completed this phase of the database, I decided to expand the database and add as many dimensions to it as possible. Throughout the last seven weeks, I have been compiling more data from day to day operations and been adding the

  4. PMAG: Relational Database Definition

    NASA Astrophysics Data System (ADS)

    Keizer, P.; Koppers, A.; Tauxe, L.; Constable, C.; Genevey, A.; Staudigel, H.; Helly, J.

    2002-12-01

    The Scripps center for Physical and Chemical Earth References (PACER) was established to help create databases for reference data and make them available to the Earth science community. As part of these efforts PACER supports GERM, REM and PMAG and maintains multiple online databases under the http://earthref.org umbrella website. This website has been built on top of a relational database that allows for the archiving and electronic access to a great variety of data types and formats, permitting data queries using a wide range of metadata. These online databases are designed in Oracle 8.1.5 and they are maintained at the San Diego Supercomputer Center. They are directly available via http://earthref.org/databases/. A prototype of the PMAG relational database is now operational within the existing EarthRef.org framework under http://earthref.org/databases/PMAG/. As will be shown in our presentation, the PMAG design focuses around the general workflow that results in the determination of typical paleo-magnetic analyses. This ensures that individual data points can be traced between the actual analysis and the specimen, sample, site, locality and expedition it belongs to. These relations guarantee traceability of the data by distinguishing between original and derived data, where the actual (raw) measurements are performed on the specimen level, and data on the sample level and higher are then derived products in the database. These relations may also serve to recalculate site means when new data becomes available for that locality. The PMAG data records are extensively described in terms of metadata. These metadata are used when scientists search through this online database in order to view and download their needed data. They minimally include method descriptions for field sampling, laboratory techniques and statistical analyses. They also include selection criteria used during the interpretation of the data and, most importantly, critical information about the

  5. Tautomerism in large databases

    PubMed Central

    Sitzmann, Markus; Ihlenfeldt, Wolf-Dietrich

    2010-01-01

    We have used the Chemical Structure DataBase (CSDB) of the NCI CADD Group, an aggregated collection of over 150 small-molecule databases totaling 103.5 million structure records, to conduct tautomerism analyses on one of the largest currently existing sets of real (i.e. not computer-generated) compounds. This analysis was carried out using calculable chemical structure identifiers developed by the NCI CADD Group, based on hash codes available in the chemoinformatics toolkit CACTVS and a newly developed scoring scheme to define a canonical tautomer for any encountered structure. CACTVS’s tautomerism definition, a set of 21 transform rules expressed in SMIRKS line notation, was used, which takes a comprehensive stance as to the possible types of tautomeric interconversion included. Tautomerism was found to be possible for more than 2/3 of the unique structures in the CSDB. A total of 680 million tautomers were calculated from, and including, the original structure records. Tautomerism overlap within the same individual database (i.e. at least one other entry was present that was really only a different tautomeric representation of the same compound) was found at an average rate of 0.3% of the original structure records, with values as high as nearly 2% for some of the databases in CSDB. Projected onto the set of unique structures (by FICuS identifier), this still occurred in about 1.5% of the cases. Tautomeric overlap across all constituent databases in CSDB was found for nearly 10% of the records in the collection. PMID:20512400

  6. Exploring the case for assisted dying in the UK.

    PubMed

    Haigh, Carol

    This article discusses the concepts of euthanasia, assisted suicide and physician-assisted suicide, under the umbrella term of assisted dying, from a pro-assisted dying perspective. It outlines the key principles underpinning the debate around assisted dying and refutes the main arguments put forward by those opposing legalisation of assisted dying in the UK. PMID:22272538

  7. Rapid prototyping of extrusion dies using layer-based techniques

    SciTech Connect

    Misiolek, W.Z.; Winther, K.T.; Prats, A.E.; Rock, S.J.

    1999-02-01

    Extrusion die design and development often requires significant craftsman skill and iterative improvement to arrive at a production-ready die geometry. Constructing the dies used during this iterative process from layers, rather than from one solid block of material, offers unique opportunities to improve die development efficiency when coupled with concepts drawn from the rapid prototyping field. This article presents a proof-of-concept illustrating the potential utility of layer-based extrusion dies for the die design and fabrication process. The major benefits include greater flexibility in the design process, a more efficient, automated fabrication technique, and a means for performing localized die modifications and repairs.

  8. The GLIMS Glacier Database

    NASA Astrophysics Data System (ADS)

    Raup, B. H.; Khalsa, S. S.; Armstrong, R.

    2007-12-01

    The Global Land Ice Measurements from Space (GLIMS) project has built a geospatial and temporal database of glacier data, composed of glacier outlines and various scalar attributes. These data are being derived primarily from satellite imagery, such as from ASTER and Landsat. Each "snapshot" of a glacier is from a specific time, and the database is designed to store multiple snapshots representative of different times. We have implemented two web-based interfaces to the database; one enables exploration of the data via interactive maps (web map server), while the other allows searches based on text-field constraints. The web map server is an Open Geospatial Consortium (OGC) compliant Web Map Server (WMS) and Web Feature Server (WFS). This means that other web sites can display glacier layers from our site over the Internet, or retrieve glacier features in vector format. All components of the system are implemented using Open Source software: Linux, PostgreSQL, PostGIS (geospatial extensions to the database), MapServer (WMS and WFS), and several supporting components such as Proj.4 (a geographic projection library) and PHP. These tools are robust and provide a flexible and powerful framework for web mapping applications. As a service to the GLIMS community, the database contains metadata on all ASTER imagery acquired over glacierized terrain. Reduced-resolution of the images (browse imagery) can be viewed either as a layer in the MapServer application, or overlaid on the virtual globe within Google Earth. The interactive map application allows the user to constrain by time what data appear on the map. For example, ASTER or glacier outlines from 2002 only, or from Autumn in any year, can be displayed. The system allows users to download their selected glacier data in a choice of formats. The results of a query based on spatial selection (using a mouse) or text-field constraints can be downloaded in any of these formats: ESRI shapefiles, KML (Google Earth), Map

  9. NATIVE HEALTH DATABASES: NATIVE HEALTH HISTORY DATABASE (NHHD)

    EPA Science Inventory

    The Native Health Databases contain bibliographic information and abstracts of health-related articles, reports, surveys, and other resource documents pertaining to the health and health care of American Indians, Alaska Natives, and Canadian First Nations. The databases provide i...

  10. NATIVE HEALTH DATABASES: NATIVE HEALTH RESEARCH DATABASE (NHRD)

    EPA Science Inventory

    The Native Health Databases contain bibliographic information and abstracts of health-related articles, reports, surveys, and other resource documents pertaining to the health and health care of American Indians, Alaska Natives, and Canadian First Nations. The databases provide i...

  11. Why do patients with lupus nephritis die?

    PubMed Central

    Correia, P; Cameron, J S; Lian, J D; Hicks, J; Ogg, C S; Williams, D G; Chantler, C; Haycock, D G

    1985-01-01

    Over 20 years 42 of 138 patients with systemic lupus erythematosus "died"--that is, suffered actual death or went into terminal renal failure, or both; data from 41 were available for analysis. In most patients the causes of death were multiple. Twenty seven patients went into terminal renal failure, of whom 25 were offered dialysis treatment. Three regained renal function later, 12 survived on dialysis or with functioning kidney allografts--almost all with inactive lupus--but 13 died after starting dialysis, most within a few weeks or months. The principal causes were active lupus or infection. In those patients with renal failure after rapid deterioration in renal function (n = 14) there were nine deaths, while of 10 patients with a slow evolution into renal failure, only four died. Four patients with impaired and 10 with normal renal function died, again most often from complications of lupus or from infection. Vascular disease was a major cause of death in seven patients, all but two of whom were young; of 15 postmortem examinations, eight showed severe coronary artery atheroma, and three surviving patients required coronary bypass operations. Analysis of the timing of death or entry into renal failure showed that in 12 out of 13 patients who died within two years of onset the lupus was judged to be active, while this was true in only eight out of 19 patients who died later. Six of the seven vascular deaths occurred later than two years from onset, while only nine of 26 renal "deaths" occurred before two years; deaths from infections (n = 13) were distributed equally. Despite this and aggressive treatment of active disease, the principal cause of actual death was uncontrolled lupus. PMID:3917713

  12. Die Europäische Union, die Europäische Gemeinschaft und ihre Rechtsordnung, die Europäische Lebensmittelkontrolle

    NASA Astrophysics Data System (ADS)

    Gallhoff, Gudrun; Rimkus, Gerhard G.

    Die Europäische Union (EU) ist ein Zusammenschluss von siebenundzwanzig unabhängigen Staaten, um deren wirtschaftliche, politische und soziale Zusammenarbeit zu verstärken. Seit 1. Mai 2007 hat sie die folgenden Mitglieder: Österreich, Belgien, Bulgarien, Dänemark, Finnland, Frankreich, Deutschland, Griechenland, Irland, Italien, Luxemburg, die Niederlande, Portugal, Spanien, Schweden, das Vereinigte Königreich von Großbritannien und Nordirland, Zypern, die Tschechische Republik, Estland, Ungarn, Lettland, Litauen, Malta, Polen, Rumänien, die Slowakei und Slowenien [1]. (Hinweis: Die Republik Zypern hat juristisch Souveränität über die ganze Insel, da die Türkische Republik Nordzypern international nicht anerkannt wird.)

  13. ARTI Refrigerant Database

    SciTech Connect

    Calm, J.M.

    1992-11-09

    The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air- conditioning and refrigeration equipment. The database identifies sources of specific information on R-32, R-123, R-124, R-125, R-134, R-134a, R-141b, R-142b, R-143a, R-152a, R-245ca, R-290 (propane), R- 717 (ammonia), ethers, and others as well as azeotropic and zeotropic and zeotropic blends of these fluids. It addresses lubricants including alkylbenzene, polyalkylene glycol, ester, and other synthetics as well as mineral oils. It also references documents on compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. A computerized version is available that includes retrieval software.

  14. Protein Model Database

    SciTech Connect

    Fidelis, K; Adzhubej, A; Kryshtafovych, A; Daniluk, P

    2005-02-23

    The phenomenal success of the genome sequencing projects reveals the power of completeness in revolutionizing biological science. Currently it is possible to sequence entire organisms at a time, allowing for a systemic rather than fractional view of their organization and the various genome-encoded functions. There is an international plan to move towards a similar goal in the area of protein structure. This will not be achieved by experiment alone, but rather by a combination of efforts in crystallography, NMR spectroscopy, and computational modeling. Only a small fraction of structures are expected to be identified experimentally, the remainder to be modeled. Presently there is no organized infrastructure to critically evaluate and present these data to the biological community. The goal of the Protein Model Database project is to create such infrastructure, including (1) public database of theoretically derived protein structures; (2) reliable annotation of protein model quality, (3) novel structure analysis tools, and (4) access to the highest quality modeling techniques available.

  15. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1996-11-15

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  16. Real Time Baseball Database

    NASA Astrophysics Data System (ADS)

    Fukue, Yasuhiro

    The author describes the system outline, features and operations of "Nikkan Sports Realtime Basaball Database" which was developed and operated by Nikkan Sports Shimbun, K. K. The system enables to input numerical data of professional baseball games as they proceed simultaneously, and execute data updating at realtime, just-in-time. Other than serving as supporting tool for prepareing newspapers it is also available for broadcasting media, general users through NTT dial Q2 and others.

  17. MEROPS: the peptidase database

    PubMed Central

    Rawlings, Neil D.; Barrett, Alan J.

    2000-01-01

    Important additions have been made to the MEROPS database (http://www.bi.bbsrc.ac.uk/Merops/Merops.htm ). These include sequence alignments and cladograms for many of the families of peptidases, and these have proved very helpful in the difficult task of distinguishing the sequences of peptidases that are simply species variants of already known enzymes from those that represent novel enzymes. PMID:10592261

  18. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1999-01-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilities access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  19. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1996-07-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  20. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1996-01-15

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. it consolidates and facilitates.access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

  1. Die kreiselnde Büroklammer: Spielwiese

    NASA Astrophysics Data System (ADS)

    Ucke, Christian; Schlichting, Hans-Joachim

    2005-01-01

    Mit Büroklammern lassen sich einfach und schnell physikalische Experimente realisieren. Vorgestellt werden zwei ungewöhnliche Kreisel (darunter ein Stehaufkreisel), die sich in wenigen Minuten biegen lassen. Weiterhin lässt sich mit Büroklammern die schon von Leibniz abgeleitete Kettenlinie simulieren. Mit etwas Mehraufwand lässt sich eine Hängebrücke bauen, bei der sich für das Tragkabel eine Parabel als Kurvenform ergibt. Im Internet sind Programme verfügbar, mit denen sich Kettenlinie und Hängeparabel simulieren lassen.

  2. ARTI Refrigerant Database

    SciTech Connect

    Cain, J.M.

    1993-04-30

    The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included. The database identifies sources of specific information on R-32, R-123, R-124, R-125, R-134, R-134a, R-141b, R-142b, R-143a, R-152a, R-245ca, R-290 (propane), R-717 (ammonia), ethers, and others as well as azeotropic and zeotropic blends of these fluids. It addresses lubricants including alkylbenzene, polyalkylene glycol, ester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents to accelerate availability of the information and will be completed or replaced in future updates.

  3. The Cambridge Structural Database

    PubMed Central

    Groom, Colin R.; Bruno, Ian J.; Lightfoot, Matthew P.; Ward, Suzanna C.

    2016-01-01

    The Cambridge Structural Database (CSD) contains a complete record of all published organic and metal–organic small-molecule crystal structures. The database has been in operation for over 50 years and continues to be the primary means of sharing structural chemistry data and knowledge across disciplines. As well as structures that are made public to support scientific articles, it includes many structures published directly as CSD Communications. All structures are processed both computationally and by expert structural chemistry editors prior to entering the database. A key component of this processing is the reliable association of the chemical identity of the structure studied with the experimental data. This important step helps ensure that data is widely discoverable and readily reusable. Content is further enriched through selective inclusion of additional experimental data. Entries are available to anyone through free CSD community web services. Linking services developed and maintained by the CCDC, combined with the use of standard identifiers, facilitate discovery from other resources. Data can also be accessed through CCDC and third party software applications and through an application programming interface. PMID:27048719

  4. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1997-02-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alterative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on various refrigerants. It addresses lubricants including alkylbenzene, polyalkylene glycol, polyolester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents. They are included to accelerate availability of the information and will be completed or replaced in future updates.

  5. Curcumin Resource Database

    PubMed Central

    Kumar, Anil; Chetia, Hasnahana; Sharma, Swagata; Kabiraj, Debajyoti; Talukdar, Narayan Chandra; Bora, Utpal

    2015-01-01

    Curcumin is one of the most intensively studied diarylheptanoid, Curcuma longa being its principal producer. This apart, a class of promising curcumin analogs has been generated in laboratories, aptly named as Curcuminoids which are showing huge potential in the fields of medicine, food technology, etc. The lack of a universal source of data on curcumin as well as curcuminoids has been felt by the curcumin research community for long. Hence, in an attempt to address this stumbling block, we have developed Curcumin Resource Database (CRDB) that aims to perform as a gateway-cum-repository to access all relevant data and related information on curcumin and its analogs. Currently, this database encompasses 1186 curcumin analogs, 195 molecular targets, 9075 peer reviewed publications, 489 patents and 176 varieties of C. longa obtained by extensive data mining and careful curation from numerous sources. Each data entry is identified by a unique CRDB ID (identifier). Furnished with a user-friendly web interface and in-built search engine, CRDB provides well-curated and cross-referenced information that are hyperlinked with external sources. CRDB is expected to be highly useful to the researchers working on structure as well as ligand-based molecular design of curcumin analogs. Database URL: http://www.crdb.in PMID:26220923

  6. The Cambridge Structural Database.

    PubMed

    Groom, Colin R; Bruno, Ian J; Lightfoot, Matthew P; Ward, Suzanna C

    2016-04-01

    The Cambridge Structural Database (CSD) contains a complete record of all published organic and metal-organic small-molecule crystal structures. The database has been in operation for over 50 years and continues to be the primary means of sharing structural chemistry data and knowledge across disciplines. As well as structures that are made public to support scientific articles, it includes many structures published directly as CSD Communications. All structures are processed both computationally and by expert structural chemistry editors prior to entering the database. A key component of this processing is the reliable association of the chemical identity of the structure studied with the experimental data. This important step helps ensure that data is widely discoverable and readily reusable. Content is further enriched through selective inclusion of additional experimental data. Entries are available to anyone through free CSD community web services. Linking services developed and maintained by the CCDC, combined with the use of standard identifiers, facilitate discovery from other resources. Data can also be accessed through CCDC and third party software applications and through an application programming interface. PMID:27048719

  7. ARTI refrigerant database

    SciTech Connect

    Calm, J.M.

    1998-08-01

    The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufactures and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on many refrigerants including propane, ammonia, water, carbon dioxide, propylene, ethers, and others as well as azeotropic and zeotropic blends of these fluids. It addresses lubricants including alkylbenzene, polyalkylene glycol, polyolester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents. They are included to accelerate availability of the information and will be completed or replaced in future updates.

  8. Human cancer databases (review).

    PubMed

    Pavlopoulou, Athanasia; Spandidos, Demetrios A; Michalopoulos, Ioannis

    2015-01-01

    Cancer is one of the four major non‑communicable diseases (NCD), responsible for ~14.6% of all human deaths. Currently, there are >100 different known types of cancer and >500 genes involved in cancer. Ongoing research efforts have been focused on cancer etiology and therapy. As a result, there is an exponential growth of cancer‑associated data from diverse resources, such as scientific publications, genome‑wide association studies, gene expression experiments, gene‑gene or protein‑protein interaction data, enzymatic assays, epigenomics, immunomics and cytogenetics, stored in relevant repositories. These data are complex and heterogeneous, ranging from unprocessed, unstructured data in the form of raw sequences and polymorphisms to well‑annotated, structured data. Consequently, the storage, mining, retrieval and analysis of these data in an efficient and meaningful manner pose a major challenge to biomedical investigators. In the current review, we present the central, publicly accessible databases that contain data pertinent to cancer, the resources available for delivering and analyzing information from these databases, as well as databases dedicated to specific types of cancer. Examples for this wealth of cancer‑related information and bioinformatic tools have also been provided. PMID:25369839

  9. State Analysis Database Tool

    NASA Technical Reports Server (NTRS)

    Rasmussen, Robert; Bennett, Matthew

    2006-01-01

    The State Analysis Database Tool software establishes a productive environment for collaboration among software and system engineers engaged in the development of complex interacting systems. The tool embodies State Analysis, a model-based system engineering methodology founded on a state-based control architecture (see figure). A state represents a momentary condition of an evolving system, and a model may describe how a state evolves and is affected by other states. The State Analysis methodology is a process for capturing system and software requirements in the form of explicit models and states, and defining goal-based operational plans consistent with the models. Requirements, models, and operational concerns have traditionally been documented in a variety of system engineering artifacts that address different aspects of a mission s lifecycle. In State Analysis, requirements, models, and operations information are State Analysis artifacts that are consistent and stored in a State Analysis Database. The tool includes a back-end database, a multi-platform front-end client, and Web-based administrative functions. The tool is structured to prompt an engineer to follow the State Analysis methodology, to encourage state discovery and model description, and to make software requirements and operations plans consistent with model descriptions.

  10. Generalized Database Management System Support for Numeric Database Environments.

    ERIC Educational Resources Information Center

    Dominick, Wayne D.; Weathers, Peggy G.

    1982-01-01

    This overview of potential for utilizing database management systems (DBMS) within numeric database environments highlights: (1) major features, functions, and characteristics of DBMS; (2) applicability to numeric database environment needs and user needs; (3) current applications of DBMS technology; and (4) research-oriented and…

  11. ThermoData Engine Database

    National Institute of Standards and Technology Data Gateway

    SRD 103 NIST ThermoData Engine Database (PC database for purchase)   ThermoData Engine is the first product fully implementing all major principles of the concept of dynamic data evaluation formulated at NIST/TRC.

  12. NEUSE RIVER WATER QUALITY DATABASE

    EPA Science Inventory

    The Neuse River water quality database is a Microsoft Access application that includes multiple data tables and some associated queries. The database was developed by Prof. Jim Bowen's research group.

  13. A Case for Database Filesystems

    SciTech Connect

    Adams, P A; Hax, J C

    2009-05-13

    Data intensive science is offering new challenges and opportunities for Information Technology and traditional relational databases in particular. Database filesystems offer the potential to store Level Zero data and analyze Level 1 and Level 3 data within the same database system [2]. Scientific data is typically composed of both unstructured files and scalar data. Oracle SecureFiles is a new database filesystem feature in Oracle Database 11g that is specifically engineered to deliver high performance and scalability for storing unstructured or file data inside the Oracle database. SecureFiles presents the best of both the filesystem and the database worlds for unstructured content. Data stored inside SecureFiles can be queried or written at performance levels comparable to that of traditional filesystems while retaining the advantages of the Oracle database.

  14. Dietary Supplement Label Database (DSLD)

    MedlinePlus

    ... Print Report Error T he Dietary Supplement Label Database (DSLD) is a joint project of the National ... participants in the latest survey in the DSLD database (NHANES): The search options: Quick Search, Browse Dietary ...

  15. High Temperature Superconducting Materials Database

    National Institute of Standards and Technology Data Gateway

    SRD 149 NIST High Temperature Superconducting Materials Database (Web, free access)   The NIST High Temperature Superconducting Materials Database (WebHTS) provides evaluated thermal, mechanical, and superconducting property data for oxides and other nonconventional superconductors.

  16. The PIR-International databases.

    PubMed Central

    Barker, W C; George, D G; Mewes, H W; Pfeiffer, F; Tsugita, A

    1993-01-01

    PIR-International is an association of macromolecular sequence data collection centers dedicated to fostering international cooperation as an essential element in the development of scientific databases. PIR-International is most noted for the Protein Sequence Database. This database originated in the early 1960's with the pioneering work of the late Margaret Dayhoff as a research tool for the study of protein evolution and intersequence relationships; it is maintained as a scientific resource, organized by biological concepts, using sequence homology as a guiding principle. PIR-International also maintains a number of other genomic, protein sequence, and sequence-related databases. The databases of PIR-International are made widely available. This paper briefly describes the architecture of the Protein Sequence Database, a number of other PIR-International databases, and mechanisms for providing access to and for distribution of these databases. PMID:8332528

  17. SmallSat Database

    NASA Technical Reports Server (NTRS)

    Petropulos, Dolores; Bittner, David; Murawski, Robert; Golden, Bert

    2015-01-01

    The SmallSat has an unrealized potential in both the private industry and in the federal government. Currently over 70 companies, 50 universities and 17 governmental agencies are involved in SmallSat research and development. In 1994, the U.S. Army Missile and Defense mapped the moon using smallSat imagery. Since then Smart Phones have introduced this imagery to the people of the world as diverse industries watched this trend. The deployment cost of smallSats is also greatly reduced compared to traditional satellites due to the fact that multiple units can be deployed in a single mission. Imaging payloads have become more sophisticated, smaller and lighter. In addition, the growth of small technology obtained from private industries has led to the more widespread use of smallSats. This includes greater revisit rates in imagery, significantly lower costs, the ability to update technology more frequently and the ability to decrease vulnerability of enemy attacks. The popularity of smallSats show a changing mentality in this fast paced world of tomorrow. What impact has this created on the NASA communication networks now and in future years? In this project, we are developing the SmallSat Relational Database which can support a simulation of smallSats within the NASA SCaN Compatability Environment for Networks and Integrated Communications (SCENIC) Modeling and Simulation Lab. The NASA Space Communications and Networks (SCaN) Program can use this modeling to project required network support needs in the next 10 to 15 years. The SmallSat Rational Database could model smallSats just as the other SCaN databases model the more traditional larger satellites, with a few exceptions. One being that the smallSat Database is designed to be built-to-order. The SmallSat database holds various hardware configurations that can be used to model a smallSat. It will require significant effort to develop as the research material can only be populated by hand to obtain the unique data

  18. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.A.; Ahuett-Garza, H.; Choudhury, A.K.; Dedhia, S.

    1998-05-01

    This report summarizes two years of research intended to develop methods to model and predict the deflection patterns in die casting dies. No comprehensive analysis of this type had previously been completed. The die casting process is complex and involves numerous mechanical and thermal phenomena that effect the mechanical behavior of the die. A critical activity in this work was sorting out and evaluating the relative contributions of the various mechanisms to die deflections. This evaluation was accomplished through a series of simple engineering analyses based primarily on the order of magnitude of the influence of each load considered on die deflections. A modeling approach incorporating commercially available finite element analysis software was developed and tested. The model evolved by testing simple models against more comprehensive models and against the limited experimental data that is available. The development of the modeling approach lead to consideration of the die casting machine in more detail than was originally anticipated. The machine is critical and cannot be ignored. A simplified model described as a spring/platen model was developed to account for the machine platens, tie bars, and toggles. The characteristics of this model are described and predictions based on this model are compared against full machine models and measured deflections of machine platens. Details of the modeling approach and the various case studies are provided in the report and in several publications that have resulted from the work.

  19. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  20. Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies

    NASA Astrophysics Data System (ADS)

    Levy, B. S.; Van Tyne, C. J.

    2015-01-01

    The effect of the strength ratio extracted from an Archard model for wear is used to describe the wear rates expected in hot forging dies. In the current study, the strength ratio is the strength of the hot forging die to the strength of the work piece. Three hot forging die steels are evaluated. The three die steels are FX, 2714, and WF. To determine the strength of the forging die, a continuous function has been developed that describes the yield strength of three die steels for temperatures from 600 to 700 °C and for times up to 20 h (i.e., tempering times of up to 20 h). The work piece material is assumed to be AISI 1045. Based on the analysis, the wear resistance of WF should be superior and FX should be slightly better than 2714. Decreasing the forging temperature increases the strength ratio, because the strength of the die surface increases faster than the flow strength of AISI 1045. The increase in the strength ratio indicates a decrease in the expected wear rate.

  1. Investigation of Die Stress Profiles during Powder Compaction using Instrumented Die

    SciTech Connect

    Hong, Sung-tae; Hovanski, Yuri; Lavender, Curt A.; Weil, K. Scott

    2008-06-01

    The radial stress profile in a cylindrical die during compaction of titanium (Ti) powder was investigated by experiments. The concept of an instrumented die was extended to design an enhanced instrumented die. Custom-made strain gage pins were used to measure the radial stress during powder compaction. The test fixture was designed to simulate double-action pressing. The measured die stress profile for Ti powder was compared with that for a commercially available iron (Fe) powder. The stress history shows that an appreciable residual stress remains in the die in the radial direction after the axial compaction stress is removed from the powder. Furthermore, the radial stress profile in the die, while under maximum axial compaction stress, is more uniform across the height of the Fe compact than that of the Ti compact. In addition, the residual stress profile in the die in the radial direction reduces symmetrically in both directions beyond the height of the compact for both powders. Finally, the Ti powder shows a significantly higher frictional coefficient at the maximum axial compaction stress, and consequently a higher maximum axial ejection stress than the Fe powder.

  2. Hydrogen Leak Detection Sensor Database

    NASA Technical Reports Server (NTRS)

    Baker, Barton D.

    2010-01-01

    This slide presentation reviews the characteristics of the Hydrogen Sensor database. The database is the result of NASA's continuing interest in and improvement of its ability to detect and assess gas leaks in space applications. The database specifics and a snapshot of an entry in the database are reviewed. Attempts were made to determine the applicability of each of the 65 sensors for ground and/or vehicle use.

  3. Dying other, dying self: creating culture and meaning in palliative healthcare.

    PubMed

    McCann, Christopher J; Adames, Hector Y

    2013-08-01

    Dying is an act of creativity, and we each die as cultural beings. Culture helps us create the meaning death requests of us. However, the dominant culture of the healthcare system views death as a failure of modern medicine, an event of unspeakable terror and taboo. Palliative clinicians must honor each dying person's cultural identity (as well as the person's family), not subject it to the dominant discourse of Western medicine. This article offers practical guidelines for palliative clinicians to do so, as well as a case vignette. PMID:22854052

  4. Continuing Education on Dying and Death.

    ERIC Educational Resources Information Center

    Chodil, Judith J.; Dulaney, Peggy E.

    1984-01-01

    "Dying and Death in Critical Care Practice" was a one-day continuing education offering designed for registered nurses who practiced in settings such as emergency rooms, intensive care units, coronary care units, and operating rooms. The workshop was part of a continuing education curriculum in critical care nursing. (SSH)

  5. Physiknobelei Kann man die Lichtausbreitung sehen?

    NASA Astrophysics Data System (ADS)

    Schlichting, H.-Joachim

    2003-07-01

    Des Menschen Sinne sind trügerisch. Das wussten schon die Philosophen der Antike, denen physikalische Zusammenhänge noch fremd waren. Doch auch in der heutigen aufgeklärten Zeit ereignen sich noch Dinge, bei denen man seinen Augen nicht traut.

  6. Dying in the age of choice.

    PubMed

    Black, Kathy; Csikai, Ellen L

    2015-01-01

    Due to the unprecedented increase in the United States aging demographics, many more people are living longer and reaching older ages than ever before. However, a longer life is not necessarily a better life, as the vast majority will face a period of prolonged deteriorating health prior to death. Although notable efforts have been underway that are designed to improve the end-of-life experience, increasing numbers of individuals express a desire and/or act upon an intent to end their lives precipitously. Though still limited, the options to actively participate in their own deaths are growing. Requests for a hastened death can occur among people of all ages and includes those with advanced illness as well as others wanting to die due to unbearable suffering. This article provides an overview of the ongoing discourse about the experience of dying faced by many older adults, including aspects frequently associated with "a good death." The limitations of established practices which seek to provide a "better" dying experience are identified followed by discussion of the growing availability of alternative options. Reflective considerations are presented to guide practice vis-à-vis the changing landscape surrounding options in dying. PMID:25869146

  7. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  8. Flexible, Ultra-Thin, Embedded Die Packaging

    NASA Astrophysics Data System (ADS)

    McPherson, Ryan J.

    As thin, flexible electronics solutions become more robust, their integration into everyday life becomes more likely. With possible applications in wearable electronics, biomedical sensors, or 'peel and stick' sensors, the reliability of these ultra-thin packages becomes paramount. Likewise, the density achievable with stacked packages benefits greatly from thinner die stacks. To this end, techniques previously developed have demonstrated packages with die thinned to approximately 20mum. Covered in this work are methods for thinning and packaging silicon die, as well as information on common materials used in these processes. The author's contribution is a fabrication process for embedding ultra-thin (approximately 10mum) silicon die in polyimide substrates. This method is fully illustrated in Chapter 3 and enumerated in the Appendix as a quick reference. Additionally, thermal cycle testing of passive daisy chain assemblies has shown promising reliability data. Packages were mounted in three alignments: flat, concave, and convex, and placed into thermal shock testing. Finally, the author discusses possible applications for this fabrication process, including the fabrication of multi-chip-modules.

  9. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  10. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  11. The Hospice: Advocate for the Dying.

    ERIC Educational Resources Information Center

    Anspaugh, David J.

    1978-01-01

    The hospice philosophy seeks to meet the needs of dying patients and their families. These needs include: effective control of pain; to be loved and to alleviate loneliness; to retain dignity and maintain control of as many aspects of life as possible; and to help the family be supportive and adapt to their inevitable loss. (JMF)

  12. A profile of silicosis cases who died.

    PubMed

    Phoon, W H

    1982-01-01

    Silicosis cases which had been notified by doctors and confirmed after investigations were followed up by the Industrial Health Division. Up to August 1981, a total of 313 persons were confirmed as having the disease. Of these, 59 had died. The majority of these 59 persons had had their silica exposure in the granite quarries. 13 had been exposed to "rubber powder" which contained a high percentage of free silica. 52 of those who died were male, and their average age at death was 60.87 years. This did not appear to be significantly shorter than their life expectancy of 65.1 years. But the average age of death for the 7 women was 58.86 years, which was much shorter than their life expectancy of 70 years. Many of the men died from causes unrelated to silicosis. But 6 of the 7 women had progressive massive fibrosis (PMF) and they apparently died of the disease or complications arising from it. PMID:7073220

  13. [Training for working with the dying].

    PubMed

    Delisle, I

    1990-04-01

    A doctoral thesis, recently defended at the University of Caen in France, is discussed here. This descriptive study looks at the question of training individuals to accompany the dying patient, and the abilities, qualifications and skills that are required. PMID:2331671

  14. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  15. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  16. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  17. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  18. Farewells by the Dying: A Sociological Study.

    ERIC Educational Resources Information Center

    Kellehear, Allan; Lewin, Terry

    1989-01-01

    Interviewed 100 terminally ill cancer patients to examine farewells made before the interview and those desired and planned but not yet completed. Most patients (81 percent) desired to farewell; most wanted farewell to occur late in course of their dying. Prominent in preferred styles of farewells were the gift, conversation, and letter.…

  19. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  20. Microbial Properties Database Editor Tutorial

    EPA Science Inventory

    A Microbial Properties Database Editor (MPDBE) has been developed to help consolidate microbial-relevant data to populate a microbial database and support a database editor by which an authorized user can modify physico-microbial properties related to microbial indicators and pat...

  1. Scientific and Technical Document Database

    National Institute of Standards and Technology Data Gateway

    NIST Scientific and Technical Document Database (PC database for purchase)   The images in NIST Special Database 20 contain a very rich set of graphic elements from scientific and technical documents, such as graphs, tables, equations, two column text, maps, pictures, footnotes, annotations, and arrays of such elements.

  2. Automatic pattern localization across layout database and photolithography mask

    NASA Astrophysics Data System (ADS)

    Morey, Philippe; Brault, Frederic; Beisser, Eric; Ache, Oliver; Röth, Klaus-Dieter

    2016-03-01

    Advanced process photolithography masks require more and more controls for registration versus design and critical dimension uniformity (CDU). The distribution of the measurement points should be distributed all over the whole mask and may be denser in areas critical to wafer overlay requirements. This means that some, if not many, of theses controls should be made inside the customer die and may use non-dedicated patterns. It is then mandatory to access the original layout database to select patterns for the metrology process. Finding hundreds of relevant patterns in a database containing billions of polygons may be possible, but in addition, it is mandatory to create the complete metrology job fast and reliable. Combining, on one hand, a software expertise in mask databases processing and, on the other hand, advanced skills in control and registration equipment, we have developed a Mask Dataprep Station able to select an appropriate number of measurement targets and their positions in a huge database and automatically create measurement jobs on the corresponding area on the mask for the registration metrology system. In addition, the required design clips are generated from the database in order to perform the rendering procedure on the metrology system. This new methodology has been validated on real production line for the most advanced process. This paper presents the main challenges that we have faced, as well as some results on the global performances.

  3. 130-nm reticle inspection using multibeam UV-wavelength database inspection

    NASA Astrophysics Data System (ADS)

    Aquino, Christopher M.; Schlaffer, Robert

    2002-07-01

    The TeraStar family of reticle inspection systems were introduced in 2000 with die-to-die and STARlightT capability. These tools set the standard for high-resolution reticle inspection for the 130 nm design rule and below. The latest addition to the TeraStar family is the TeraStar SLF77, which extends the tool platform to include die-to-database inspection capability. Sensitivity for Chrome on Glass is 100 nm with much greater tolerance for inspecting aggressive OPC features such as serifs and assist lines. Many advanced reticles that are not inspectable on previous generation inspection tools are all inspectable on the TeraStar SLF77. Data prep times and file structure have been significantly improved with the average prep time being less than 10 percent of the 365UV-HR and average output file size less than 25 percent of the GigaPrep. The TeraStar SLF77 incorporates all the features of the TeraStar family such as triple-beam optics and TeraPro HP High Productivity Modes with the ability to run STARlight inspections concurrently with either die-to-die or die-to-database pattern inspections. Advanced registration algorithms accommodate subtle plate and machine errors to provide high sensitivity with low false detections. Advanced image overlay inspects small lines and OPC features and is very independent of defect shape and location. The TeraStar SLF77 has removed the barriers that existed with previous generation database inspection tools and made advanced reticle die-to-database inspection cost effective. Last October, KLA-Tencor introduced the TeraStar SLF77 and the three beta sites have recently completed beta evaluation. Here we present the first results from the use of the TeraStar in a production environment triple beam die-to-database inspection system. We have also shipped more than ten systems to customers worldwide. This paper describes the implementation of productivity improvements at the beta sites, performance on 130nm node customer product reticles

  4. Nato-Pco Database

    NASA Astrophysics Data System (ADS)

    Wtv Gmbh

    This new CD-ROM is a reference database. It covers almost twenty years of non-military scientific/technical meetings and publications sponsored by the NATO Science Committee. It contains full references (with keywords and/or abstracts) to more than 30,000 contributions from scientists all over the world and is published in more than 1,000 volumes. With the easy-to-follow menu options of the retrieval software, access to the data is simple and fast. Updates are planned on a yearly basis.

  5. Developing customer databases.

    PubMed

    Rao, S K; Shenbaga, S

    2000-01-01

    There is a growing consensus among pharmaceutical companies that more product and customer-specific approaches to marketing and selling a new drug can result in substantial increases in sales. Marketers and researchers taking a proactive micro-marketing approach to identifying, profiling, and communicating with target customers are likely to facilitate such approaches and outcomes. This article provides a working framework for creating customer databases that can be effectively mined to achieve a variety of such marketing and sales force objectives. PMID:11209474

  6. EMU Lessons Learned Database

    NASA Technical Reports Server (NTRS)

    Matthews, Kevin M., Jr.; Crocker, Lori; Cupples, J. Scott

    2011-01-01

    As manned space exploration takes on the task of traveling beyond low Earth orbit, many problems arise that must be solved in order to make the journey possible. One major task is protecting humans from the harsh space environment. The current method of protecting astronauts during Extravehicular Activity (EVA) is through use of the specially designed Extravehicular Mobility Unit (EMU). As more rigorous EVA conditions need to be endured at new destinations, the suit will need to be tailored and improved in order to accommodate the astronaut. The Objective behind the EMU Lessons Learned Database(LLD) is to be able to create a tool which will assist in the development of next-generation EMUs, along with maintenance and improvement of the current EMU, by compiling data from Failure Investigation and Analysis Reports (FIARs) which have information on past suit failures. FIARs use a system of codes that give more information on the aspects of the failure, but if one is unfamiliar with the EMU they will be unable to decipher the information. A goal of the EMU LLD is to not only compile the information, but to present it in a user-friendly, organized, searchable database accessible to all familiarity levels with the EMU; both newcomers and veterans alike. The EMU LLD originally started as an Excel database, which allowed easy navigation and analysis of the data through pivot charts. Creating an entry requires access to the Problem Reporting And Corrective Action database (PRACA), which contains the original FIAR data for all hardware. FIAR data are then transferred to, defined, and formatted in the LLD. Work is being done to create a web-based version of the LLD in order to increase accessibility to all of Johnson Space Center (JSC), which includes converting entries from Excel to the HTML format. FIARs related to the EMU have been completed in the Excel version, and now focus has shifted to expanding FIAR data in the LLD to include EVA tools and support hardware such as

  7. Databases as an information service

    NASA Technical Reports Server (NTRS)

    Vincent, D. A.

    1983-01-01

    The relationship of databases to information services, and the range of information services users and their needs for information is explored and discussed. It is argued that for database information to be valuable to a broad range of users, it is essential that access methods be provided that are relatively unstructured and natural to information services users who are interested in the information contained in databases, but who are not willing to learn and use traditional structured query languages. Unless this ease of use of databases is considered in the design and application process, the potential benefits from using database systems may not be realized.

  8. Die-Attached Versus Die-Detached Resin Injection Chamber for Pultrusion

    NASA Astrophysics Data System (ADS)

    Palikhel, D. R.; Roux, J. A.; Jeswani, A. L.

    2013-02-01

    Resin injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to explore the "attached-die configuration" and "detached-die configuration" for improving the resin injection pultrusion process. In this work the impact of pull speed on complete wet out of the reinforced fiber is investigated for attached-die and detached-die resin injection pultrusion with various chamber length considerations. A 3-D finite volume technique was applied to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. This work explores the resin injection pressure needed to achieve complete wet out and the corresponding maximum pressure inside the resin injection chamber so as to improve injection chamber design to keep the pressure within the injection chamber within reasonable constraints for different pull speeds.

  9. IPD: the Immuno Polymorphism Database.

    PubMed

    Robinson, James; Marsh, Steven G E

    2007-01-01

    The Immuno Polymorphism Database (IPD) (http://www.ebi.ac.uk/ipd/) is a set of specialist databases related to the study of polymorphic genes in the immune system. IPD currently consists of four databases: IPD-KIR, contains the allelic sequences of killer cell immunoglobulin-like receptors (KIRs); IPD-MHC, a database of sequences of the major histocompatibility complex (MHC) of different species; IPD-HPA, alloantigens expressed only on platelets; and IPD-ESTAB, which provides access to the European Searchable Tumour Cell Line Database, a cell bank of immunologically characterized melanoma cell lines. The IPD project works with specialist groups or nomenclature committees who provide and curate individual sections before they are submitted to IPD for online publication. The IPD project stores all the data in a set of related databases. Those sections with similar data, such as IPD-KIR and IPD-MHC, share the same database structure. PMID:18449992

  10. Curcumin Resource Database.

    PubMed

    Kumar, Anil; Chetia, Hasnahana; Sharma, Swagata; Kabiraj, Debajyoti; Talukdar, Narayan Chandra; Bora, Utpal

    2015-01-01

    Curcumin is one of the most intensively studied diarylheptanoid, Curcuma longa being its principal producer. This apart, a class of promising curcumin analogs has been generated in laboratories, aptly named as Curcuminoids which are showing huge potential in the fields of medicine, food technology, etc. The lack of a universal source of data on curcumin as well as curcuminoids has been felt by the curcumin research community for long. Hence, in an attempt to address this stumbling block, we have developed Curcumin Resource Database (CRDB) that aims to perform as a gateway-cum-repository to access all relevant data and related information on curcumin and its analogs. Currently, this database encompasses 1186 curcumin analogs, 195 molecular targets, 9075 peer reviewed publications, 489 patents and 176 varieties of C. longa obtained by extensive data mining and careful curation from numerous sources. Each data entry is identified by a unique CRDB ID (identifier). Furnished with a user-friendly web interface and in-built search engine, CRDB provides well-curated and cross-referenced information that are hyperlinked with external sources. CRDB is expected to be highly useful to the researchers working on structure as well as ligand-based molecular design of curcumin analogs. PMID:26220923

  11. Paleomagnetic database search possible

    NASA Astrophysics Data System (ADS)

    Harbert, William

    I have recently finished an on-line search program which allows remote users to search the “Abase” ASCII version of the World Paleomagnetic Database developed by Lock and McElhinny [1991]. The program is very simple to use and will search the Soviet, non-Soviet, rock unit, and reference databases and create output files that can be downloaded back to a researcher's local system using the ftp command.To use Search, telnet to 130.49.3.1 (earth.eps.pitt.edu) and login as the user “Search.rdquo There is no password, and the user is asked a series of questions, which define the geographic region and ages of interest. The program will also ask for an identifier with which to create the output file names. The program has three modes of operation: text-only, Tektronix graphics, or X11l/R5 graphics; the proper choice depends on the computer hardware that is used by the searcher.

  12. UGTA Photograph Database

    SciTech Connect

    NSTec Environmental Restoration

    2009-04-20

    One of the advantages of the Nevada Test Site (NTS) is that most of the geologic and hydrologic features such as hydrogeologic units (HGUs), hydrostratigraphic units (HSUs), and faults, which are important aspects of flow and transport modeling, are exposed at the surface somewhere in the vicinity of the NTS and thus are available for direct observation. However, due to access restrictions and the remote locations of many of the features, most Underground Test Area (UGTA) participants cannot observe these features directly in the field. Fortunately, National Security Technologies, LLC, geologists and their predecessors have photographed many of these features through the years. During fiscal year 2009, work was done to develop an online photograph database for use by the UGTA community. Photographs were organized, compiled, and imported into Adobe® Photoshop® Elements 7. The photographs were then assigned keyword tags such as alteration type, HGU, HSU, location, rock feature, rock type, and stratigraphic unit. Some fully tagged photographs were then selected and uploaded to the UGTA website. This online photograph database provides easy access for all UGTA participants and can help “ground truth” their analytical and modeling tasks. It also provides new participants a resource to more quickly learn the geology and hydrogeology of the NTS.

  13. Asbestos Exposure Assessment Database

    NASA Technical Reports Server (NTRS)

    Arcot, Divya K.

    2010-01-01

    Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

  14. PHENIX RPC Production Database

    NASA Astrophysics Data System (ADS)

    Jones, Timothy

    2008-10-01

    The Pioneering High Energy Nuclear Interaction eXperiment (PHENIX) is located on the Relativistic Heavy Ion Collider (RHIC) ring at Brookhaven National Laboratory. A primary physics goal that can be studied by PHENIX is the origin of the proton spin. One of the types of rare events looked for in the moun arms at PHENIX are single high transverse momentum mouns, which tend to result from the decay of a W bozon. Resistive Plate Chambers (RPCs) will be used as a level 1 trigger to select these events from a large background of low transverse momentum muons. As these RPCs are assembled it is necessary to keep track of the individual parts of each RPC as well as data from various quality assurance tests in a way that will allow the information to be easily accessible years to come as the RPCs are being used. This is done through the use of a database and web page interface that can be used to enter data about the RPCs or to look up information from tests. I will be presenting on how we keep track of the RPCs, their parts, and data from quality assurance tests as they are being assembled as well as how we can retrieve this data after it has been stored in the database.

  15. Petrophysical database of Uganda

    NASA Astrophysics Data System (ADS)

    Ruotoistenmäki, Tapio; Birungi, Nelson R.

    2015-06-01

    The petrophysical database of Uganda contains data on ca. 5800 rock samples collected and analyzed during 2009-2012 in international geological and geophysical projects covering the main part of the land area of Uganda. The parameters included are the susceptibilities and densities of all available field samples. Susceptibilities were measured from the samples from three directions. Using these parameters, we also calculated the ratios of susceptibility maxima/minima reflecting direction homogeneity of magnetic minerals, and estimated the iron content of paramagnetic samples and the magnetite content of ferrimagnetic samples. Statistical and visual analysis of the petrophysical data of Uganda demonstrated their wide variation, thus emphasizing their importance in analyzing the bedrock variations in three dimensions. Using the density-susceptibility diagram, the data can be classified into six main groups: 1. A low density and susceptibility group, consisting of sedimentary and altered rocks. 2. Low-susceptibility, felsic rocks (e.g. quartzites and metasandstones). 3. Paramagnetic, felsic rocks (e.g. granites). 4. Ferrimagnetic, magnetite-containing felsic rocks (e.g. granites). 5. Paramagnetic mafic rocks (e.g. amphibolites and dolerites). 6. Ferrimagnetic, mafic rocks containing magnetite and high-density mafic minerals (mainly dolerites). Moreover, analysis revealed that the parameter distributions of even a single rock type (e.g. granites) can be very variable, forming separate clusters. This demonstrates that the simple calculation of density or susceptibility averages of rock types can be highly erratic. For example, the average can lie between two groups, where only few, if any, samples exist. Therefore, estimation of the representative density and susceptibility must be visually verified from these diagrams. The areal distribution of parameters and their calculated derivatives generally correlate well with the regional distribution of lithological and

  16. Cancer Patients Who Choose to Die At Home Live Longer

    MedlinePlus

    ... suggest that doctors shouldn't hesitate to allow dying cancer patients to receive palliative care at home, ... people would like to be at home when dying, but there have been concerns about whether the ...

  17. Women Twice as Likely to Die from Severe Heart Attack

    MedlinePlus

    ... gov/medlineplus/news/fullstory_158172.html Women Twice as Likely to Die From Severe Heart Attack, Study ... 2016 (HealthDay News) -- Women are up to twice as likely as men to die from the most ...

  18. A Scalable Database Infrastructure

    NASA Astrophysics Data System (ADS)

    Arko, R. A.; Chayes, D. N.

    2001-12-01

    The rapidly increasing volume and complexity of MG&G data, and the growing demand from funding agencies and the user community that it be easily accessible, demand that we improve our approach to data management in order to reach a broader user-base and operate more efficient and effectively. We have chosen an approach based on industry-standard relational database management systems (RDBMS) that use community-wide data specifications, where there is a clear and well-documented external interface that allows use of general purpose as well as customized clients. Rapid prototypes assembled with this approach show significant advantages over the traditional, custom-built data management systems that often use "in-house" legacy file formats, data specifications, and access tools. We have developed an effective database prototype based a public domain RDBMS (PostgreSQL) and metadata standard (FGDC), and used it as a template for several ongoing MG&G database management projects - including ADGRAV (Antarctic Digital Gravity Synthesis), MARGINS, the Community Review system of the Digital Library for Earth Science Education, multibeam swath bathymetry metadata, and the R/V Maurice Ewing onboard acquisition system. By using standard formats and specifications, and working from a common prototype, we are able to reuse code and deploy rapidly. Rather than spend time on low-level details such as storage and indexing (which are built into the RDBMS), we can focus on high-level details such as documentation and quality control. In addition, because many commercial off-the-shelf (COTS) and public domain data browsers and visualization tools have built-in RDBMS support, we can focus on backend development and leave the choice of a frontend client(s) up to the end user. While our prototype is running under an open source RDBMS on a single processor host, the choice of standard components allows this implementation to scale to commercial RDBMS products and multiprocessor servers as

  19. National Geochronological Database

    USGS Publications Warehouse

    Revised by Sloan, Jan; Henry, Christopher D.; Hopkins, Melanie; Ludington, Steve; Original database by Zartman, Robert E.; Bush, Charles A.; Abston, Carl

    2003-01-01

    The National Geochronological Data Base (NGDB) was established by the United States Geological Survey (USGS) to collect and organize published isotopic (also known as radiometric) ages of rocks in the United States. The NGDB (originally known as the Radioactive Age Data Base, RADB) was started in 1974. A committee appointed by the Director of the USGS was given the mission to investigate the feasibility of compiling the published radiometric ages for the United States into a computerized data bank for ready access by the user community. A successful pilot program, which was conducted in 1975 and 1976 for the State of Wyoming, led to a decision to proceed with the compilation of the entire United States. For each dated rock sample reported in published literature, a record containing information on sample location, rock description, analytical data, age, interpretation, and literature citation was constructed and included in the NGDB. The NGDB was originally constructed and maintained on a mainframe computer, and later converted to a Helix Express relational database maintained on an Apple Macintosh desktop computer. The NGDB and a program to search the data files were published and distributed on Compact Disc-Read Only Memory (CD-ROM) in standard ISO 9660 format as USGS Digital Data Series DDS-14 (Zartman and others, 1995). As of May 1994, the NGDB consisted of more than 18,000 records containing over 30,000 individual ages, which is believed to represent approximately one-half the number of ages published for the United States through 1991. Because the organizational unit responsible for maintaining the database was abolished in 1996, and because we wanted to provide the data in more usable formats, we have reformatted the data, checked and edited the information in some records, and provided this online version of the NGDB. This report describes the changes made to the data and formats, and provides instructions for the use of the database in geographic

  20. Fatigue of die cast zinc alloys

    SciTech Connect

    Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

    2006-04-01

    The rotating bending fatigue limit of die cast zinc alloy 2, alloy 3, alloy 5, AcuZinc 5, and ZA-8 were determined as a part of an on-going program by ILZRO into the mechanical properties of die cast zinc. The stress-life (S-N) curves of alloys 3, 5, AcuZinc 5, and ZA-8 were determined previously. This presentation reports the results of the S-N curve for Alloy 2 and the calculated fatigue limits for all five alloys. During the previous stress-life testing, the samples were stopped at 10 million cycles and the fatigue limit for alloy 3, alloy 5, and AcuZinc 5 appeared to be higher and the fatigue limit for ZA-8 appeared to be lower than the values reported in the literature. This was further investigated in alloy 5 and ZA-8 by testing continuous cast bulk alloy 5 and ZA-8.

  1. Architecture for on-die interconnect

    DOEpatents

    Khare, Surhud; More, Ankit; Somasekhar, Dinesh; Dunning, David S.

    2016-03-15

    In an embodiment, an apparatus includes: a plurality of islands configured on a semiconductor die, each of the plurality of islands having a plurality of cores; and a plurality of network switches configured on the semiconductor die and each associated with one of the plurality of islands, where each network switch includes a plurality of output ports, a first set of the output ports are each to couple to the associated network switch of an island via a point-to-point interconnect and a second set of the output ports are each to couple to the associated network switches of a plurality of islands via a point-to-multipoint interconnect. Other embodiments are described and claimed.

  2. Spiritual aspects of death and dying.

    PubMed Central

    Mermann, A. C.

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned. PMID:1519377

  3. Dying in hospital: the residents' viewpoint

    PubMed Central

    Ahmedzai, S

    1982-01-01

    A survey of residents' (junior house officers') experiences and attitudes to the terminal care part of their work in four Glasgow teaching hospitals showed that even a month after starting work one-fifth of the respondents had not actively managed a dying patient. Sixty-four per cent thought that they had received inadequate teaching in terminal care. Depression and anxiety had been the most difficult symptoms encountered. The residents thought that the ward nursing staff contributed much more than their senior medical colleagues to both the medical and psychological aspects of terminal care. The results indicate a need for more undergraduate education in the most relevant areas, such as coping with the psychological problems of dying patients and their relatives. Newly qualified residents require more support from senior medical staff in looking after the terminally ill. PMID:6809204

  4. Impact of Temperature on Cooling Structural Variation of Forging Dies

    NASA Astrophysics Data System (ADS)

    Piesova, Marianna; Czan, Andrej

    2014-12-01

    The article is focused on the issue of die forging in the automotive industry. The cooling effect of temperature on the structure of forged die are under review. In the article, there is elaborated the analysis of theoretical knowledge in the field, focusing on die forging and experimentally proven effect of the cooling rate on the final structure of forged dies made of hypoeutectic carbon steel C56E2.

  5. Assisted dying - should the UK change its stance?

    PubMed

    Gordon, Daniel; Raphael, Claire E; Vassiliou, Vassilios

    2015-04-01

    Along with an increasing interest in assisted dying by many European and North American countries, some of which have already modified their existing laws to accommodate this, the interest in assisted dying in the UK has increased once again following Lord Falconer's Assisted Dying for the Terminally Ill Bill. Drawing on examples from countries where similar assisted dying laws are already in place, this article analyses and contextualises the proposed bill and discusses its potential pitfalls and benefits for the UK. PMID:25628340

  6. Medical futility and care of dying patients.

    PubMed Central

    Jecker, N S

    1995-01-01

    In this article, I address ethical concerns related to forgoing futile medical treatment in terminally ill and dying patients. Any discussion of medical futility should emphasize that health professionals and health care institutions have ethical responsibilities regarding medical futility. Among the topics I address are communicating with patients and families, resolving possible conflicts, and developing professional standards. Finally, I explore why acknowledging the futility of life-prolonging medical interventions can be so difficult for patients, families, and health professionals. PMID:7571593

  7. Japanese particle-physics leader dies

    NASA Astrophysics Data System (ADS)

    Durrani, Matin

    2008-08-01

    Yoji Totsuka, former director general of the KEK particle-physics lab in Japan, died on 10 July at the age of 66. Totsuka, whose research interests were in the field of neutrino physics, served as KEK boss for three years from April 2003. After retiring in 2006, Totsuka became a professor emeritus at KEK and the University of Tokyo. His funeral on 12 July was attended by more than 500 people.

  8. Public attitudes toward the right to die.

    PubMed Central

    Genuis, S J; Genuis, S K; Chang, W C

    1994-01-01

    OBJECTIVE: To determine public attitudes toward the right to die, euthanasia and related end-of-life decisions. DESIGN: Mail survey based on telephone numbers randomly selected by computer. SETTING: Edmonton. PARTICIPANTS: Of 1347 computer-generated, randomly selected telephone numbers called between February and June 1992, 902 individuals were reached, and 500 eligible contacts (55%) agreed to fill out the mailed questionnaire based on 12 vignettes involving end-of-life decisions. A total of 356 usable questionnaires (71%) were subsequently returned. MAIN OUTCOME MEASURES: Attitudes toward end-of-life decisions including withdrawal of life support, euthanasia, chronic suffering and the right to die, living wills and family involvement in decision making for incompetent individuals. Comments and demographic data were also solicited. RESULTS: Of the respondents 84% supported a family's right to withdraw life support from a patient in a persistent coma, and 90% supported a mentally competent patient's right to request that life support be withdrawn. Active euthanasia was supported by 65% for only patients experiencing severe pain and terminal illness. There was marked opposition to euthanasia for patients in other circumstances, such as an elderly disabled person who feels he or she is a burden on relatives (opposed by 65%), a patient with chronic depression resistant to treatment (by 75%) or an elderly person no longer satisfied with life and who has various minor physical ailments (by 83%). In all, 63% of the respondents felt that legalization of euthanasia for terminal illnesses would lead to euthanasia for many other, unsupported reasons, and 34% supported legislation to prohibit euthanasia in all situations. CONCLUSIONS: Public support for the right to die varies depending on the circumstances of the patient. The single most significant factor determining attitudes was the level of religious activity. The family's wishes were an important factor in end

  9. Mouse Phenome Database

    PubMed Central

    Grubb, Stephen C.; Bult, Carol J.; Bogue, Molly A.

    2014-01-01

    The Mouse Phenome Database (MPD; phenome.jax.org) was launched in 2001 as the data coordination center for the international Mouse Phenome Project. MPD integrates quantitative phenotype, gene expression and genotype data into a common annotated framework to facilitate query and analysis. MPD contains >3500 phenotype measurements or traits relevant to human health, including cancer, aging, cardiovascular disorders, obesity, infectious disease susceptibility, blood disorders, neurosensory disorders, drug addiction and toxicity. Since our 2012 NAR report, we have added >70 new data sets, including data from Collaborative Cross lines and Diversity Outbred mice. During this time we have completely revamped our homepage, improved search and navigational aspects of the MPD application, developed several web-enabled data analysis and visualization tools, annotated phenotype data to public ontologies, developed an ontology browser and released new single nucleotide polymorphism query functionality with much higher density coverage than before. Here, we summarize recent data acquisitions and describe our latest improvements. PMID:24243846

  10. Ribosomal Database Project II

    DOE Data Explorer

    The Ribosomal Database Project (RDP) provides ribosome related data and services to the scientific community, including online data analysis and aligned and annotated Bacterial small-subunit 16S rRNA sequences. As of March 2008, RDP Release 10 is available and currently (August 2009) contains 1,074,075 aligned 16S rRNA sequences. Data that can be downloaded include zipped GenBank and FASTA alignment files, a histogram (in Excel) of the number of RDP sequences spanning each base position, data in the Functional Gene Pipeline Repository, and various user submitted data. The RDP-II website also provides numerous analysis tools.[From the RDP-II home page at http://rdp.cme.msu.edu/index.jsp

  11. Mouse phenome database.

    PubMed

    Grubb, Stephen C; Bult, Carol J; Bogue, Molly A

    2014-01-01

    The Mouse Phenome Database (MPD; phenome.jax.org) was launched in 2001 as the data coordination center for the international Mouse Phenome Project. MPD integrates quantitative phenotype, gene expression and genotype data into a common annotated framework to facilitate query and analysis. MPD contains >3500 phenotype measurements or traits relevant to human health, including cancer, aging, cardiovascular disorders, obesity, infectious disease susceptibility, blood disorders, neurosensory disorders, drug addiction and toxicity. Since our 2012 NAR report, we have added >70 new data sets, including data from Collaborative Cross lines and Diversity Outbred mice. During this time we have completely revamped our homepage, improved search and navigational aspects of the MPD application, developed several web-enabled data analysis and visualization tools, annotated phenotype data to public ontologies, developed an ontology browser and released new single nucleotide polymorphism query functionality with much higher density coverage than before. Here, we summarize recent data acquisitions and describe our latest improvements. PMID:24243846

  12. View generated database

    NASA Technical Reports Server (NTRS)

    Downward, James G.

    1992-01-01

    This document represents the final report for the View Generated Database (VGD) project, NAS7-1066. It documents the work done on the project up to the point at which all project work was terminated due to lack of project funds. The VGD was to provide the capability to accurately represent any real-world object or scene as a computer model. Such models include both an accurate spatial/geometric representation of surfaces of the object or scene, as well as any surface detail present on the object. Applications of such models are numerous, including acquisition and maintenance of work models for tele-autonomous systems, generation of accurate 3-D geometric/photometric models for various 3-D vision systems, and graphical models for realistic rendering of 3-D scenes via computer graphics.

  13. The CHIANTI atomic database

    NASA Astrophysics Data System (ADS)

    Young, P. R.; Dere, K. P.; Landi, E.; Del Zanna, G.; Mason, H. E.

    2016-04-01

    The freely available CHIANTI atomic database was first released in 1996 and has had a huge impact on the analysis and modeling of emissions from astrophysical plasmas. It contains data and software for modeling optically thin atom and positive ion emission from low density (≲1013 cm-3) plasmas from x-ray to infrared wavelengths. A key feature is that the data are assessed and regularly updated, with version 8 released in 2015. Atomic data for modeling the emissivities of 246 ions and neutrals are contained in CHIANTI, together with data for deriving the ionization fractions of all elements up to zinc. The different types of atomic data are summarized here and their formats discussed. Statistics on the impact of CHIANTI to the astrophysical community are given and examples of the diverse range of applications are presented.

  14. A Contingency Framework for Listening to the Dying

    ERIC Educational Resources Information Center

    Vora, Erika; Vora, Ariana

    2008-01-01

    Listening to the dying poses special challenges. This paper proposes a contingency framework for describing and assessing various circumstances when listening to the dying. It identifies current approaches to listening, applies the contingency framework toward effectively listening to the dying, and proposes a new type of listening called…

  15. Die and telescoping punch form convolutions in thin diaphragm

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Die and punch set forms convolutions in thin dished metal diaphragm without stretching the metal too thin at sharp curvatures. The die corresponds to the metal shape to be formed, and the punch consists of elements that progressively slide against one another under the restraint of a compressed-air cushion to mate with the die.

  16. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  17. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  18. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  19. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  20. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  1. Darwin als Sehhilfe für die Psychologie - Evolutionspsychologie

    NASA Astrophysics Data System (ADS)

    Schwab, Frank

    Im Folgenden geht es um Einäugige, stereoskopisches Sehen, weite und enge Horizonte, Monokel und Sonnenbrillen. Der Beitrag versucht die Metapher des Sehens und der Sehhilfen anzuwenden, um so zu verdeutlichen, welchen Gewinn die herkömmliche Psychologie durch die Verwendung einer Darwin'schen Brille erlangen kann.

  2. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  3. Human genome protein function database.

    PubMed Central

    Sorenson, D. K.

    1991-01-01

    A database which focuses on the normal functions of the currently-known protein products of the Human Genome was constructed. Information is stored as text, figures, tables, and diagrams. The program contains built-in functions to modify, update, categorize, hypertext, search, create reports, and establish links to other databases. The semi-automated categorization feature of the database program was used to classify these proteins in terms of biomedical functions. PMID:1807638

  4. Inorganic Crystal Structure Database (ICSD)

    National Institute of Standards and Technology Data Gateway

    SRD 84 FIZ/NIST Inorganic Crystal Structure Database (ICSD) (PC database for purchase)   The Inorganic Crystal Structure Database (ICSD) is produced cooperatively by the Fachinformationszentrum Karlsruhe(FIZ) and the National Institute of Standards and Technology (NIST). The ICSD is a comprehensive collection of crystal structure data of inorganic compounds containing more than 140,000 entries and covering the literature from 1915 to the present.

  5. Relativistic quantum private database queries

    NASA Astrophysics Data System (ADS)

    Sun, Si-Jia; Yang, Yu-Guang; Zhang, Ming-Ou

    2015-04-01

    Recently, Jakobi et al. (Phys Rev A 83, 022301, 2011) suggested the first practical private database query protocol (J-protocol) based on the Scarani et al. (Phys Rev Lett 92, 057901, 2004) quantum key distribution protocol. Unfortunately, the J-protocol is just a cheat-sensitive private database query protocol. In this paper, we present an idealized relativistic quantum private database query protocol based on Minkowski causality and the properties of quantum information. Also, we prove that the protocol is secure in terms of the user security and the database security.

  6. A Database for Propagation Models

    NASA Technical Reports Server (NTRS)

    Kantak, Anil V.; Rucker, James

    1997-01-01

    The Propagation Models Database is designed to allow the scientists and experimenters in the propagation field to process their data through many known and accepted propagation models. The database is an Excel 5.0 based software that houses user-callable propagation models of propagation phenomena. It does not contain a database of propagation data generated out of the experiments. The database not only provides a powerful software tool to process the data generated by the experiments, but is also a time- and energy-saving tool for plotting results, generating tables and producing impressive and crisp hard copy for presentation and filing.

  7. Biological Databases for Behavioral Neurobiology

    PubMed Central

    Baker, Erich J.

    2014-01-01

    Databases are, at their core, abstractions of data and their intentionally derived relationships. They serve as a central organizing metaphor and repository, supporting or augmenting nearly all bioinformatics. Behavioral domains provide a unique stage for contemporary databases, as research in this area spans diverse data types, locations, and data relationships. This chapter provides foundational information on the diversity and prevalence of databases, how data structures support the various needs of behavioral neuroscience analysis and interpretation. The focus is on the classes of databases, data curation, and advanced applications in bioinformatics using examples largely drawn from research efforts in behavioral neuroscience. PMID:23195119

  8. A study of erosion in die casting dies by a multiple pin accelerated erosion test

    NASA Astrophysics Data System (ADS)

    Shivpuri, R.; Yu, M.; Venkatesan, K.; Chu, Y.-L.

    1995-04-01

    An accelerated erosion test was developed to evaluate the erosion resistance of die materials and coatings for die casting application. An acceleration in wear was achieved by selecting pyramid-shaped core pins, hypereutectic aluminum silicon casting alloy, high melt temperatures and high gate velocities. Multiple pin design was selected to enable multiple test sites for comparative evaluation. Apilot run was conducted on a 300 ton commercial die casting machine at various sites (pins) to verify the thermal and flow similarities. Subsequently, campaigns were run on two different 300 ton commercial die casting machines to evaluate H13 die material and different coatings for erosive resistance. Coatings and surface treatments evaluated included surface micropeening, titanium nitride, boron carbide, vanadium carbide, and metallic coatings—tungsten, molybdenum, and platinum. Recent campaigns with different melt temperatures have indicated a possible link between soldering phenomena and erosive wear. This paper presents the details of the test set up and the results of the pilot and evaluation tests.

  9. Die grünende IT - Wie die Computerindustrie das Energiesparen neu erfand

    NASA Astrophysics Data System (ADS)

    von Greiner, Wilhelm

    Die IT-Branche hat ihr grünes Gewissen entdeckt. In der jetzigen Verbreitung und Intensität ist dieses Phänomen noch recht neu - lange Zeit schien die Informationstechnik in puncto Umweltverträglichkeit und Energieverbrauch eine "weiße Weste" zu haben. Schließlich läuft ein PC mit Strom und nicht mit - sagen wir mal - einem Dieselmotor: Beim Booten eines Computers schießt nicht erst eine dunkelgraue Rauchwolke aus dem Auspuff, die Lärmerzeugung beschränkt sich auf das Surren des Lüfters, zum Tanken fahren muss man mit ihm auch nicht, und die Produktion der Komponenten erfolgt… ja, wo eigentlich? Irgendwo in der "dritten Welt", in Fernost oder in Mexiko. So sind die umweltschädlichen Aspekte der Produktion von Leiterplatten und sonstigen Bauteilen aus den Augen, aus dem Sinn und bestenfalls sporadisch Gegenstand eines kritischen Greenpeace-Berichts1, der im Überangebot der Medienlandschaft untergeht.

  10. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  11. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  12. Sheet metal stamping die design for warm forming

    DOEpatents

    Ghosh, Amit K.

    2003-04-22

    In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

  13. The asteroid lightcurve database

    NASA Astrophysics Data System (ADS)

    Warner, Brian D.; Harris, Alan W.; Pravec, Petr

    2009-07-01

    The compilation of a central database for asteroid lightcurve data, i.e., rotation rate and amplitude along with ancillary information such as diameter and albedo (known or estimated), taxonomic class, etc., has been important to statistical studies for several decades. Having such a compilation saves the researcher hours of effort combing through any number of journals, some obvious and some not, to check on prior research. Harris has been compiling such data in the Asteroid Lightcurve Database (LCDB) for more than 25 years with Warner and Pravec assisting the past several years. The main data included in the LCDB are lightcurve rotation periods and amplitudes, color indices, H-G parameters, diameters (actual or derived), basic binary asteroid parameters, and spin axis and shape models. As time permits we are reviewing existing entries to enter data not previously recorded ( e.g., phase angle data). As of 2008 December, data for 3741 asteroids based on more than 10650 separate detail records derived from entries in various journals were included in the LCDB. Of those 3741 asteroids, approximately 3100 have data of sufficient quality for statistical analysis, including 7 that have "dual citizenship" - meaning that they have (or had) asteroid designations as well comet designations. Here we present a discussion of the nature of LCDB data, i.e., which values are actually measured and which are derived. For derived data, we give our justification for specific values. We also present some analysis based on the LCDB data, including new default albedo ( p) and phase slope parameter ( G) values for the primary taxonomic classes and a review of the frequency-diameter distribution of all asteroids as well as some selected subsets. The most recent version of data used in this analysis is available for download from the Collaborative Asteroid Lightcurve Link (CALL) site at http://www.MinorPlanetObserver.com/astlc/default.htm. Other data sets, some only subsets of the full

  14. ["Good dying"--definition and current state of research].

    PubMed

    Hutter, Nico; Stößel, Ulrich; Meffert, Cornelia; Körner, Mirjam; Bozzaro, Claudia; Becker, Gerhild; Baumeister, Harald

    2015-08-01

    The advances of modern medicine did not only result in prolongation of life expectancy, but also led to a shift from dying at home to dying in public institutions. In western countries most people die at advanced age in medical facilities. Hence, the question regarding the conditions, which should be provided by society and especially medicine, to allow terminally ill people to experience "good dying" is substantial. For this purpose, an examination of patients', family members' and health care providers' understanding of the term " good dying" is required. The present paper aims at shedding light on the term "good dying" and to summarize the current state of research. Therefore, the attributes of "good dying" will be described from the perspectives of patients, family members and health care providers, which are discussed and examined in current medical-sociological research. These attributes can be illustrated on three dimensions: Quality of life at the end of life (e. g. pain relief, mental well-being), quality of dying (e. g. avoiding prolonged dying, autonomy, presence of relatives) and quality of health care at the end of life (e. g. patient-oriented health care, positive communication between health care providers and patients, availability of guidelines). Although the attributes of "good dying" are described in detail in the existing literature, further studies have to clarify the relevance and impact of these attributes as predictors of "good dying". PMID:26306020

  15. DIE Deflection Modeling: Empirical Validation and Tech Transfer

    SciTech Connect

    R. Allen Miller

    2003-05-28

    This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.

  16. Simulation of Stamping Process of Automotive Panel Considering Die Deformation

    SciTech Connect

    Keum, Y.T.; Ahn, I.H.; Lee, I.K.; Song, M.H.; Kwon, S.O.; Park, J.S.

    2005-08-05

    In order to see the effect of die deformation on the forming of sheet metals, the draw-ins, strains, and spring-backs of an automotive fender panels are numerically simulated considering the die deformation, which is found by the simultaneous structural analysis of press and dies. By coupling the forming analysis and the structural analysis, the die deformation is simultaneously taken into account in the forming process. Furthermore, for the consideration of load difference transferred among the upper die, punch, and blank holder due to the changes in sheet thickness, the gap elements are employed instead of the blank sheet in the structural analysis. The numerical simulation results of an automotive fender draw panel are compared with the measurements. The comparison of the forming and spring-back analysis results between the rigid die and the deformed die shows that the deformed tool provides more accurate forming and spring-back prediction.

  17. Pancreatic Cancer Database

    PubMed Central

    Thomas, Joji Kurian; Kim, Min-Sik; Balakrishnan, Lavanya; Nanjappa, Vishalakshi; Raju, Rajesh; Marimuthu, Arivusudar; Radhakrishnan, Aneesha; Muthusamy, Babylakshmi; Khan, Aafaque Ahmad; Sakamuri, Sruthi; Tankala, Shantal Gupta; Singal, Mukul; Nair, Bipin; Sirdeshmukh, Ravi; Chatterjee, Aditi; Prasad, T S Keshava; Maitra, Anirban; Gowda, Harsha; Hruban, Ralph H; Pandey, Akhilesh

    2014-01-01

    Pancreatic cancer is the fourth leading cause of cancer-related death in the world. The etiology of pancreatic cancer is heterogeneous with a wide range of alterations that have already been reported at the level of the genome, transcriptome, and proteome. The past decade has witnessed a large number of experimental studies using high-throughput technology platforms to identify genes whose expression at the transcript or protein levels is altered in pancreatic cancer. Based on expression studies, a number of molecules have also been proposed as potential biomarkers for diagnosis and prognosis of this deadly cancer. Currently, there are no repositories which provide an integrative view of multiple Omics data sets from published research on pancreatic cancer. Here, we describe the development of a web-based resource, Pancreatic Cancer Database (http://www.pancreaticcancerdatabase.org), as a unified platform for pancreatic cancer research. PCD contains manually curated information pertaining to quantitative alterations in miRNA, mRNA, and proteins obtained from small-scale as well as high-throughput studies of pancreatic cancer tissues and cell lines. We believe that PCD will serve as an integrative platform for scientific community involved in pancreatic cancer research. PMID:24839966

  18. The Protein Ensemble Database.

    PubMed

    Varadi, Mihaly; Tompa, Peter

    2015-01-01

    The scientific community's major conceptual notion of structural biology has recently shifted in emphasis from the classical structure-function paradigm due to the emergence of intrinsically disordered proteins (IDPs). As opposed to their folded cousins, these proteins are defined by the lack of a stable 3D fold and a high degree of inherent structural heterogeneity that is closely tied to their function. Due to their flexible nature, solution techniques such as small-angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) spectroscopy and fluorescence resonance energy transfer (FRET) are particularly well-suited for characterizing their biophysical properties. Computationally derived structural ensembles based on such experimental measurements provide models of the conformational sampling displayed by these proteins, and they may offer valuable insights into the functional consequences of inherent flexibility. The Protein Ensemble Database (http://pedb.vib.be) is the first openly accessible, manually curated online resource storing the ensemble models, protocols used during the calculation procedure, and underlying primary experimental data derived from SAXS and/or NMR measurements. By making this previously inaccessible data freely available to researchers, this novel resource is expected to promote the development of more advanced modelling methodologies, facilitate the design of standardized calculation protocols, and consequently lead to a better understanding of how function arises from the disordered state. PMID:26387108

  19. The Mars Observer database

    NASA Technical Reports Server (NTRS)

    Albee, Arden L.

    1988-01-01

    Mars Observer will study the surface, atmosphere, and climate of Mars in a systematic way over an entire Martian year. The observations of the surface will provide a database that will be invaluable to the planning of a future Mars sample return mission. Mars Observer is planned for a September 1992 launch from the Space Shuttle, using an upper-stage. After the one year transit the spacecraft is injected into orbit about Mars and the orbit adjusted to a near-circular, sun-synchronous low-altitude, polar orbit. During the Martian year in this mapping orbit the instruments gather both geoscience data and climatological data by repetitive global mapping. The scientific objectives of the mission are to: (1) determine the global elemental and mineralogical character of the surface material; (2) define globally the topography and gravitational field; (3) establish the nature of the magnetic field; (4) determine the time and space distribution, abundance, sources, and sinks of volatile material and dust over a seasonal cycle; and (5) explore the structure and aspects of the circulation of the atmosphere. The science investigations and instruments for Mars Observer have been chosen with these objectives in mind. These instruments, the principal investigator or team leader and the objectives are discussed.

  20. Euthanasia, assisted dying and the right to die in Ghana: a socio-legal analysis.

    PubMed

    Owusu-Dapaa, Ernest

    2013-12-01

    There is unanimity among states to protect the continuation of life of the individual as a safeguard against their collective extinction. The right to life is accordingly guaranteed but its antithesis, the right to die is the subject of an unending debate. The controversy over the right to die is deepened by rapid advances in medicine, creating the capability for prolongation of life beyond the span which one's natural strength can endure. Ghana's supreme law explicitly guarantees the right to life but remains ambiguous on right to die, particularly euthanasia and assisted dying. Thus, some of the other rights, such as the right to dignity and not to be tortured, can creatively be exploited to justify some instances of euthanasia. Ghana's criminal code largely proscribes euthanasia. Notwithstanding, proscription of euthanasia and assisted dying by the law, in Ghana's empirical work undertaken in some of the communities in Ghana, suggests that euthanasia is quietly practisedin health facilities and private homes, especially in the rural areas. Contrary to the popular reasons assigned in the literature of the Western world, with respect to the practice or quest for legalization of euthanasia as being a necessity for providing relief from pain or hopeless quality of life, empirical data from social and anthropological studies conducted in Ghana reveal that poverty is the motivation for informal euthanasia practice in Ghana rather than genuine desire on part of patients to die or their relatives to see to their accelerated death. Apart from poverty, traditional cultural values of African societies consider non-natural death as a taboo and ignominy to the victim and his family. Thus, any move by the government to legalize euthanasia will need to be informed by widely held consultations and a possible referendum; otherwise the law may be just a mere transplant of Western models of legislation on euthanasia without reflecting the ethos of the African people. PMID:24552118

  1. XCOM: Photon Cross Sections Database

    National Institute of Standards and Technology Data Gateway

    SRD 8 XCOM: Photon Cross Sections Database (Web, free access)   A web database is provided which can be used to calculate photon cross sections for scattering, photoelectric absorption and pair production, as well as total attenuation coefficients, for any element, compound or mixture (Z <= 100) at energies from 1 keV to 100 GeV.

  2. Content Independence in Multimedia Databases.

    ERIC Educational Resources Information Center

    de Vries, Arjen P.

    2001-01-01

    Investigates the role of data management in multimedia digital libraries, and its implications for the design of database management systems. Introduces the notions of content abstraction and content independence. Proposes a blueprint of a new class of database technology, which supports the basic functionality for the management of both content…

  3. Databases for K-8 Students

    ERIC Educational Resources Information Center

    Young, Terrence E., Jr.

    2004-01-01

    Today's elementary school students have been exposed to computers since birth, so it is not surprising that they are so proficient at using them. As a result, they are ready to search databases that include topics and information appropriate for their age level. Subscription databases are digital copies of magazines, newspapers, journals,…

  4. Database Quality: Label or Liable.

    ERIC Educational Resources Information Center

    Armstrong, C. J.

    The Centre for Information Quality Management (CIQM) was set up by the Library Association and UK (United Kingdom) Online User Group to act as a clearinghouse to which database users may report problems relating to the quality of any aspect of a database being used. CIQM acts as an intermediary between the user and information provider in…

  5. Wind turbine reliability database update.

    SciTech Connect

    Peters, Valerie A.; Hill, Roger Ray; Stinebaugh, Jennifer A.; Veers, Paul S.

    2009-03-01

    This report documents the status of the Sandia National Laboratories' Wind Plant Reliability Database. Included in this report are updates on the form and contents of the Database, which stems from a fivestep process of data partnerships, data definition and transfer, data formatting and normalization, analysis, and reporting. Selected observations are also reported.

  6. Atomic Spectroscopic Databases at NIST

    NASA Technical Reports Server (NTRS)

    Reader, J.; Kramida, A. E.; Ralchenko, Yu.

    2006-01-01

    We describe recent work at NIST to develop and maintain databases for spectra, transition probabilities, and energy levels of atoms that are astrophysically important. Our programs to critically compile these data as well as to develop a new database to compare plasma calculations for atoms that are not in local thermodynamic equilibrium are also summarized.

  7. Instructional Strategies Online Database (ISOD)

    ERIC Educational Resources Information Center

    Hodges, Dodi; Mandlebaum, Linda Higbee; Boff, Colleen; Miller, Mitch

    2007-01-01

    This article describes an online database of evidence-based learning strategies for students. The database is a quick resource written in user-friendly language for teachers of all students but may be especially useful for teachers of students with disabilities.

  8. DRUG ENFORCEMENT ADMINISTRATION REGISTRATION DATABASE

    EPA Science Inventory

    The Drug Enforcement Administration (DEA), as part of its efforts to control the abuse and misuse of controlled substances and chemicals used in producing some over-the-counter drugs, maintains databases of individuals registered to handle these substances. These databases are av...

  9. The ENZYME database in 2000.

    PubMed

    Bairoch, A

    2000-01-01

    The ENZYME database is a repository of information related to the nomenclature of enzymes. In recent years it has became an indispensable resource for the development of metabolic databases. The current version contains information on 3705 enzymes. It is available through the ExPASy WWW server (http://www.expasy.ch/enzyme/ ). PMID:10592255

  10. The ENZYME database in 2000

    PubMed Central

    Bairoch, Amos

    2000-01-01

    The ENZYME database is a repository of information related to the nomenclature of enzymes. In recent years it has became an indispensable resource for the development of metabolic databases. The current version contains information on 3705 enzymes. It is available through the ExPASy WWW server (http://www. expasy.ch/enzyme/ ). PMID:10592255

  11. SPINAL CORD INJURY (SCI) DATABASE

    EPA Science Inventory

    The National Spinal Cord Injury Database has been in existence since 1973 and captures data from SCI cases in the United States. Since its inception, 24 federally funded Model SCI Care Systems have contributed data to the National SCI Database. Statistics are derived from this da...

  12. When a partner dies: lesbian widows.

    PubMed

    Bent, Katherine N; Magilvy, J Kathy

    2006-06-01

    Death of a life partner and the subsequent bereavement are profound experiences for an individual. By far, the majority of bereavement research reported is focused on heterosexual couples, primarily married and often in the later years of life. The purpose of this study was to describe the bereavement experiences of lesbians whose life partners have died. The study used a descriptive, qualitative design informed by feminist scholarship and phenomenology to access the depth of personal experiences, as well as internally interpreted meanings of those experiences, among lesbian widows. PMID:16613798

  13. Models of physician-assisted dying.

    PubMed

    Girsh, F

    1996-12-01

    Repeated surveys have shown that more than 70% of Americans support physician aid in dying for terminally ill mentally competent adults. Recent polls of physicians in Oregon and Michigan demonstrate majority support of those doctors for such a law while 25% of physicians surveyed in Washington admitted to already providing help. Models of how that would work have been spelled out in proposed legislation in the United States since 1988, other models come from the Northern Territory in Australia, from Holland, and from Jack Kevorkian's writing and actions as well as from other writers such as Dr Timothy Quill. PMID:9009461

  14. Databases in the next millennium.

    PubMed

    Davidoff, F

    1997-10-15

    Predicting the likelihood that large databases will become an important instrument for medical quality improvement is at least as difficult as most prognostication. This attempt at prediction starts by trying to ask the right questions: Can data serve as the agent for meaningful improvement? Is meaningful improvement possible without data? What elements are necessary and sufficient for improving the quality of medical care? It then looks for answers, starting with an unconventional excursion into the history of database use. This is followed by a recognition that the use of large databases for medical quality improvement is a true innovation, the future of which will probably be determined as much by the social and emotional forces that govern the diffusion of all innovations as by the technical strength of databases themselves. Finally, it examines some of the limitations and pitfalls that are likely to be associated with the increasing use of large databases in medicine. PMID:9382397

  15. The magnet components database system

    SciTech Connect

    Baggett, M.J. ); Leedy, R.; Saltmarsh, C.; Tompkins, J.C. )

    1990-01-01

    The philosophy, structure, and usage MagCom, the SSC magnet components database, are described. The database has been implemented in Sybase (a powerful relational database management system) on a UNIX-based workstation at the Superconducting Super Collider Laboratory (SSCL); magnet project collaborators can access the database via network connections. The database was designed to contain the specifications and measured values of important properties for major materials, plus configuration information (specifying which individual items were used in each cable, coil, and magnet) and the test results on completed magnets. These data will facilitate the tracking and control of the production process as well as the correlation of magnet performance with the properties of its constituents. 3 refs., 10 figs.

  16. A database for propagation models

    NASA Technical Reports Server (NTRS)

    Kantak, Anil V.; Suwitra, Krisjani S.

    1992-01-01

    In June 1991, a paper at the fifteenth NASA Propagation Experimenters Meeting (NAPEX 15) was presented outlining the development of a database for propagation models. The database is designed to allow the scientists and experimenters in the propagation field to process their data through any known and accepted propagation model. The architecture of the database also incorporates the possibility of changing the standard models in the database to fit the scientist's or the experimenter's needs. The database not only provides powerful software to process the data generated by the experiments, but is also a time- and energy-saving tool for plotting results, generating tables, and producing impressive and crisp hard copy for presentation and filing.

  17. GOTTCHA Database, Version 1

    Energy Science and Technology Software Center (ESTSC)

    2015-08-03

    One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discoverymore » rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions.In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure.During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which

  18. GOTTCHA Database, Version 1

    SciTech Connect

    Freitas, Tracey; Chain, Patrick; Lo, Chien-Chi; Li, Po-E

    2015-08-03

    One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions.In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure.During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is

  19. [From absolute necessity of dying to preventive planning of dying? The change of social and medicine debates on dying in the 1980s].

    PubMed

    Jordan, I

    2010-04-01

    International euthanasia debates focussing on "autonomous dying" in the 1980s corresponded with a general change in the health-care system: availability of new technical means with an analogous medical-ethic understanding of human suffering and dying. This change is part of a general development from "passive health consumption" to "active prevention" in our society. PMID:20229456

  20. National Metal Casting Research Institute final report. Volume 2, Die casting research

    SciTech Connect

    Jensen, D.

    1994-06-01

    Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

  1. Care of the dying adolescent: special considerations.

    PubMed

    Freyer, David R

    2004-02-01

    More than 3000 adolescents in the United States die annually from the effects of chronic illness. Providing appropriate end-of-life care for these patients is particularly challenging because of several developmental, ethical, and legal considerations relevant to this age group. Developmental issues relate to the ways in which life-threatening illness alters the normal physical and psychological changes associated with adolescence, including attainment of independence, social skills, peer acceptance, and a healthy self-image. Ethical and legal issues arise from the fact that many terminally ill adolescents <18 years of age lack ordinary legal authority to make binding medical decisions (including discontinuation of their treatment), yet they meet functional criteria for having the competence to do so. In such situations, a broad medical, ethical, and legal consensus supports giving decisional authority to the minor patient. Even when full decisional authority is not appropriate, strong moral arguments exist for taking serious account of the young adolescent's treatment preferences. In supporting the dying adolescent, an atmosphere promoting excellent communication and sound decision-making should be fostered as early as possible during preterminal care and maintained thereafter. Once palliative-care strategies become the clinical focus, psychosocial support sensitive to the adolescent's developmental stage must be provided. Using these principles, clinicians can play a crucial role in helping the adolescent, in the face of death, to experience richness of life and the dignity of self-determination. PMID:14754953

  2. [The debate about the right to die].

    PubMed

    Beca, Juan Pablo; Ortiz, Armando; Solar, Sebastián

    2005-05-01

    The Right to Die is a debatable issue and some basic notions need to be clarified to discuss it. Death needs to be recognized as part of human life. The goal of medicine is to avoid pain and alleviate suffering, to prevent premature death and when this is not possible, to let it occur peacefully. The concept of euthanasia is unclear, which increases the confusion on end-of-life topics. The term euthanasia should be used only when referring to medical acts performed to produce the patient's death, with the intention of terminating his/her suffering. It is what is usually called "active" euthanasia, which can be voluntary or involuntary. It is essential to understand the difference between producing and allowing death. This will permit timely decisions about limiting or withdrawing treatments, that can be disproportionate or that are only prolonging suffering. Limiting treatments does not mean to abandon the patient but rather to redefine his needs, such as pain treatment, prevention of complications, and relief of suffering. The ethic rationale for these decisions is the respect to the dignity of human life, and the estimation of proportionality or futility of each treatment. The physician's duty with the patient at the end of his life is to assist him in dying according to his values and to minimize his distress. PMID:15970987

  3. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, J.E.; Korth, G.E.

    1985-06-27

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  4. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, John E.; Korth, Gary E.

    1986-01-01

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block.

  5. Dying, mourning, and spirituality: a psychological perspective.

    PubMed

    Marrone, R

    1999-09-01

    Based in an unfortunate tradition that stretches back in time to Watson's behaviorism and Freud's psychoanalysis, psychology has tended to reject and to pathologize matters of the spirit. In the past 30 years, however, with the advent of what has been termed the cognitive revolution, psychology has greatly expanded the scope of its subject matter. Psychologists and thanatologists have begun to unravel the cognitive underpinnings of our assumptive world and the transformation of those underpinnings in times of crisis and stress. This article examines the cognitive basis of the spiritual experience and the use of cognitive assimilation, accommodation strategies during the process of mourning the death of a loved one, as well as during the process of living our own dying. Of special importance to mental health professionals and clergy, new research on dying, mourning, and spirituality suggests that the specific ways in which people rediscover meaning--such as belief in traditional religious doctrine, the afterlife, reincarnation, philanthropy, or a spiritual order to the universe--may be less important than the process itself. In other words, in the midst of dealing with profound loss in our lives, the ability to reascribe meaning to a changed world through spiritual transformation, religious conversion, or existential change may be more significant than the specific content by which that need is filled. PMID:10558611

  6. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.Allen; Ahuett-Garza, Horacio; Choudhury, Aswin K.; Dedhia, Sanjay

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects or problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  7. Unifying Memory and Database Transactions

    NASA Astrophysics Data System (ADS)

    Dias, Ricardo J.; Lourenço, João M.

    Software Transactional Memory is a concurrency control technique gaining increasing popularity, as it provides high-level concurrency control constructs and eases the development of highly multi-threaded applications. But this easiness comes at the expense of restricting the operations that can be executed within a memory transaction, and operations such as terminal and file I/O are either not allowed or incur in serious performance penalties. Database I/O is another example of operations that usually are not allowed within a memory transaction. This paper proposes to combine memory and database transactions in a single unified model, benefiting from the ACID properties of the database transactions and from the speed of main memory data processing. The new unified model covers, without differentiating, both memory and database operations. Thus, the users are allowed to freely intertwine memory and database accesses within the same transaction, knowing that the memory and database contents will always remain consistent and that the transaction will atomically abort or commit the operations in both memory and database. This approach allows to increase the granularity of the in-memory atomic actions and hence, simplifies the reasoning about them.

  8. Database of Properties of Meteors

    NASA Technical Reports Server (NTRS)

    Suggs, Rob; Anthea, Coster

    2006-01-01

    A database of properties of meteors, and software that provides access to the database, are being developed as a contribution to continuing efforts to model the characteristics of meteors with increasing accuracy. Such modeling is necessary for evaluation of the risk of penetration of spacecraft by meteors. For each meteor in the database, the record will include an identification, date and time, radiant properties, ballistic coefficient, radar cross section, size, density, and orbital elements. The property of primary interest in the present case is density, and one of the primary goals in this case is to derive densities of meteors from their atmospheric decelerations. The database and software are expected to be valid anywhere in the solar system. The database will incorporate new data plus results of meteoroid analyses that, heretofore, have not been readily available to the aerospace community. Taken together, the database and software constitute a model that is expected to provide improved estimates of densities and to result in improved risk analyses for interplanetary spacecraft. It is planned to distribute the database and software on a compact disk.

  9. Database tomography for commercial application

    NASA Technical Reports Server (NTRS)

    Kostoff, Ronald N.; Eberhart, Henry J.

    1994-01-01

    Database tomography is a method for extracting themes and their relationships from text. The algorithms, employed begin with word frequency and word proximity analysis and build upon these results. When the word 'database' is used, think of medical or police records, patents, journals, or papers, etc. (any text information that can be computer stored). Database tomography features a full text, user interactive technique enabling the user to identify areas of interest, establish relationships, and map trends for a deeper understanding of an area of interest. Database tomography concepts and applications have been reported in journals and presented at conferences. One important feature of the database tomography algorithm is that it can be used on a database of any size, and will facilitate the users ability to understand the volume of content therein. While employing the process to identify research opportunities it became obvious that this promising technology has potential applications for business, science, engineering, law, and academe. Examples include evaluating marketing trends, strategies, relationships and associations. Also, the database tomography process would be a powerful component in the area of competitive intelligence, national security intelligence and patent analysis. User interests and involvement cannot be overemphasized.

  10. GLOBAL ECOSYSTEMS DATABASE: DATABASE DOCUMENTATION AND CD-ROM

    EPA Science Inventory

    The primary objective of this cooperative research and development is to produce an integrated, quality controlled, global database (including time sequences) for spatially distributed modeling. he project concentrates on modern observational data, including remotely sensed data ...

  11. The Berlin Emissivity Database

    NASA Astrophysics Data System (ADS)

    Helbert, Jorn

    Remote sensing infrared spectroscopy is the principal field of investigation for planetary surfaces composition. Past, present and future missions to the solar system bodies include in their payload instruments measuring the emerging radiation in the infrared range. TES on Mars Global Surveyor and THEMIS on Mars Odyssey have in many ways changed our views of Mars. The PFS instrument on the ESA Mars Express mission has collected spectra since the beginning of 2004. In spring 2006 the VIRTIS experiment started its operation on the ESA Venus Express mission, allowing for the first time to map the surface of Venus using the 1 µm emission from the surface. The MERTIS spectrometer is included in the payload of the ESA BepiColombo mission to Mercury, scheduled for 2013. For the interpretation of the measured data an emissivity spectral library of planetary analogue materials is needed. The Berlin Emissivity Database (BED) presented here is focused on relatively fine-grained size separates, providing a realistic basis for interpretation of thermal emission spectra of planetary regoliths. The BED is therefore complimentary to existing thermal emission libraries, like the ASU library for example. The BED contains currently entries for plagioclase and potassium feldspars, low Ca and high Ca pyroxenes, olivine, elemental sulphur, common martian analogues (JSC Mars-1, Salten Skov, palagonites, montmorillonite) and a lunar highland soil sample measured in the wavelength range from 3 to 50 µm as a function of particle size. For each sample, the spectra of four well defined particle size separates (¡25 µm , 25-63 µm, 63-125 µm, 125-250 µm) are measured with a 4 cm-1 spectral resolution. These size separates have been selected as typical representations for most of the planetary surfaces. Following an ongoing upgrade of the Planetary Emmissivity Laboratory (PEL) at DLR in Berlin measurements can be obtained at temperatures up to 500° C - realistic for the dayside conditions

  12. Cloudsat tropical cyclone database

    NASA Astrophysics Data System (ADS)

    Tourville, Natalie D.

    CloudSat (CS), the first 94 GHz spaceborne cloud profiling radar (CPR), launched in 2006 to study the vertical distribution of clouds. Not only are CS observations revealing inner vertical cloud details of water and ice globally but CS overpasses of tropical cyclones (TC's) are providing a new and exciting opportunity to study the vertical structure of these storm systems. CS TC observations are providing first time vertical views of TC's and demonstrate a unique way to observe TC structure remotely from space. Since December 2009, CS has intersected every globally named TC (within 1000 km of storm center) for a total of 5,278 unique overpasses of tropical systems (disturbance, tropical depression, tropical storm and hurricane/typhoon/cyclone (HTC)). In conjunction with the Naval Research Laboratory (NRL), each CS TC overpass is processed into a data file containing observational data from the afternoon constellation of satellites (A-TRAIN), Navy's Operational Global Atmospheric Prediction System Model (NOGAPS), European Center for Medium range Weather Forecasting (ECMWF) model and best track storm data. This study will describe the components and statistics of the CS TC database, present case studies of CS TC overpasses with complementary A-TRAIN observations and compare average reflectivity stratifications of TC's across different atmospheric regimes (wind shear, SST, latitude, maximum wind speed and basin). Average reflectivity stratifications reveal that characteristics in each basin vary from year to year and are dependent upon eye overpasses of HTC strength storms and ENSO phase. West Pacific (WPAC) basin storms are generally larger in size (horizontally and vertically) and have greater values of reflectivity at a predefined height than all other basins. Storm structure at higher latitudes expands horizontally. Higher vertical wind shear (≥ 9.5 m/s) reduces cloud top height (CTH) and the intensity of precipitation cores, especially in HTC strength storms

  13. Database of recent tsunami deposits

    USGS Publications Warehouse

    Peters, Robert; Jaffe, Bruce E.

    2010-01-01

    This report describes a database of sedimentary characteristics of tsunami deposits derived from published accounts of tsunami deposit investigations conducted shortly after the occurrence of a tsunami. The database contains 228 entries, each entry containing data from up to 71 categories. It includes data from 51 publications covering 15 tsunamis distributed between 16 countries. The database encompasses a wide range of depositional settings including tropical islands, beaches, coastal plains, river banks, agricultural fields, and urban environments. It includes data from both local tsunamis and teletsunamis. The data are valuable for interpreting prehistorical, historical, and modern tsunami deposits, and for the development of criteria to identify tsunami deposits in the geologic record.

  14. New geothermal database for Utah

    USGS Publications Warehouse

    Blackett, Robert E.

    1993-01-01

    The Utah Geological Survey complied a preliminary database consisting of over 800 records on thermal wells and springs in Utah with temperatures of 20??C or greater. Each record consists of 35 fields, including location of the well or spring, temperature, depth, flow-rate, and chemical analyses of water samples. Developed for applications on personal computers, the database will be useful for geochemical, statistical, and other geothermal related studies. A preliminary map of thermal wells and springs in Utah, which accompanies the database, could eventually incorporate heat-flow information, bottom-hole temperatures from oil and gas wells, traces of Quaternary faults, and locations of young volcanic centers.

  15. NUCLEAR DATABASES FOR REACTOR APPLICATIONS.

    SciTech Connect

    PRITYCHENKO, B.; ARCILLA, R.; BURROWS, T.; HERMAN, M.W.; MUGHABGHAB, S.; OBLOZINSKY, P.; ROCHMAN, D.; SONZOGNI, A.A.; TULI, J.; WINCHELL, D.F.

    2006-06-05

    The National Nuclear Data Center (NNDC): An overview of nuclear databases, related products, nuclear data Web services and publications. The NNDC collects, evaluates, and disseminates nuclear physics data for basic research and applied nuclear technologies. The NNDC maintains and contributes to the nuclear reaction (ENDF, CSISRS) and nuclear structure databases along with several others databases (CapGam, MIRD, IRDF-2002) and provides coordination for the Cross Section Evaluation Working Group (CSEWG) and the US Nuclear Data Program (USNDP). The Center produces several publications and codes such as Atlas of Neutron Resonances, Nuclear Wallet Cards booklets and develops codes, such as nuclear reaction model code Empire.

  16. Biological databases for human research.

    PubMed

    Zou, Dong; Ma, Lina; Yu, Jun; Zhang, Zhang

    2015-02-01

    The completion of the Human Genome Project lays a foundation for systematically studying the human genome from evolutionary history to precision medicine against diseases. With the explosive growth of biological data, there is an increasing number of biological databases that have been developed in aid of human-related research. Here we present a collection of human-related biological databases and provide a mini-review by classifying them into different categories according to their data types. As human-related databases continue to grow not only in count but also in volume, challenges are ahead in big data storage, processing, exchange and curation. PMID:25712261

  17. The Automatic Library Tracking Database

    SciTech Connect

    Fahey, Mark R; Jones, Nicholas A; Hadri, Bilel

    2010-01-01

    A library tracking database has been developed and put into production at the National Institute for Computational Sciences and the Oak Ridge Leadership Computing Facility (both located at Oak Ridge National Laboratory.) The purpose of the library tracking database is to track which libraries are used at link time on Cray XT5 Supercomputers. The database stores the libraries used at link time and also records the executables run in a batch job. With this data, many operationally important questions can be answered such as which libraries are most frequently used and which users are using deprecated libraries or applications. The infrastructure design and reporting mechanisms are presented along with collected production data.

  18. Biological Databases for Human Research

    PubMed Central

    Zou, Dong; Ma, Lina; Yu, Jun; Zhang, Zhang

    2015-01-01

    The completion of the Human Genome Project lays a foundation for systematically studying the human genome from evolutionary history to precision medicine against diseases. With the explosive growth of biological data, there is an increasing number of biological databases that have been developed in aid of human-related research. Here we present a collection of human-related biological databases and provide a mini-review by classifying them into different categories according to their data types. As human-related databases continue to grow not only in count but also in volume, challenges are ahead in big data storage, processing, exchange and curation. PMID:25712261

  19. International forensic automotive paint database

    NASA Astrophysics Data System (ADS)

    Bishea, Gregory A.; Buckle, Joe L.; Ryland, Scott G.

    1999-02-01

    The Technical Working Group for Materials Analysis (TWGMAT) is supporting an international forensic automotive paint database. The Federal Bureau of Investigation and the Royal Canadian Mounted Police (RCMP) are collaborating on this effort through TWGMAT. This paper outlines the support and further development of the RCMP's Automotive Paint Database, `Paint Data Query'. This cooperative agreement augments and supports a current, validated, searchable, automotive paint database that is used to identify make(s), model(s), and year(s) of questioned paint samples in hit-and-run fatalities and other associated investigations involving automotive paint.

  20. Database characterisation of HEP applications

    NASA Astrophysics Data System (ADS)

    Piorkowski, Mariusz; Grancher, Eric; Topurov, Anton

    2012-12-01

    Oracle-based database applications underpin many key aspects of operations for both the LHC accelerator and the LHC experiments. In addition to the overall performance, the predictability of the response is a key requirement to ensure smooth operations and delivering predictability requires understanding the applications from the ground up. Fortunately, database management systems provide several tools to check, measure, analyse and gather useful information. We present our experiences characterising the performance of several typical HEP database applications performance characterisations that were used to deliver improved predictability and scalability as well as for optimising the hardware platform choice as we migrated to new hardware and Oracle 11g.

  1. Treatment-resistant major depressive disorder and assisted dying.

    PubMed

    Schuklenk, Udo; van de Vathorst, Suzanne

    2015-08-01

    Competent patients suffering from treatment-resistant depressive disorder should be treated no different in the context of assisted dying to other patients suffering from chronic conditions that render their lives permanently not worth living to them. Jurisdictions that are considering, or that have, decriminalised assisted dying are discriminating unfairly against patients suffering from treatment-resistant depression if they exclude such patients from the class of citizens entitled to receive assistance in dying. PMID:25935906

  2. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  3. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  4. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  5. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  6. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  7. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  8. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  9. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  10. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  11. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  12. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  13. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  14. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  15. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  16. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  17. Marine and Hydrokinetic Technology Database

    DOE Data Explorer

    DOE’s Marine and Hydrokinetic Technology Database provides up-to-date information on marine and hydrokinetic renewable energy, both in the U.S. and around the world. The database includes wave, tidal, current, and ocean thermal energy, and contains information on the various energy conversion technologies, companies active in the field, and development of projects in the water. Depending on the needs of the user, the database can present a snapshot of projects in a given region, assess the progress of a certain technology type, or provide a comprehensive view of the entire marine and hydrokinetic energy industry. Results are displayed as a list of technologies, companies, or projects. Data can be filtered by a number of criteria, including country/region, technology type, generation capacity, and technology or project stage. The database was updated in 2009 to include ocean thermal energy technologies, companies, and projects.

  18. LDEF meteoroid and debris database

    NASA Technical Reports Server (NTRS)

    Dardano, C. B.; See, Thomas H.; Zolensky, Michael E.

    1994-01-01

    The Long Duration Exposure Facility (LDEF) Meteoroid and Debris Special Investigation Group (M&D SIG) database is maintained at the Johnson Space Center (JSC), Houston, Texas, and consists of five data tables containing information about individual features, digitized images of selected features, and LDEF hardware (i.e., approximately 950 samples) archived at JSC. About 4000 penetrations (greater than 300 micron in diameter) and craters (greater than 500 micron in diameter) were identified and photodocumented during the disassembly of LDEF at the Kennedy Space Center (KSC), while an additional 4500 or so have subsequently been characterized at JSC. The database also contains some data that have been submitted by various PI's, yet the amount of such data is extremely limited in its extent, and investigators are encouraged to submit any and all M&D-type data to JSC for inclusion within the M&D database. Digitized stereo-image pairs are available for approximately 4500 features through the database.

  19. Database Technology in Digital Libraries.

    ERIC Educational Resources Information Center

    Preston, Carole; Lin, Binshan

    2002-01-01

    Reviews issues relating to database technology and digital libraries. Highlights include resource sharing; ongoing digital library projects; metadata; user interfaces; query processing; interoperability; data quality; copyright infringement; and managerial implications, including electronic versus printed materials, accessibility,…

  20. InterAction Database (IADB)

    Cancer.gov

    The InterAction Database includes demographic and prescription information for more than 500,000 patients in the northern and middle Netherlands and has been integrated with other systems to enhance data collection and analysis.

  1. Fun Databases: My Top Ten.

    ERIC Educational Resources Information Center

    O'Leary, Mick

    1992-01-01

    Provides reviews of 10 online databases: Consumer Reports; Public Opinion Online; Encyclopedia of Associations; Official Airline Guide Adventure Atlas and Events Calendar; CENDATA; Hollywood Hotline; Fearless Taster; Soap Opera Summaries; and Human Sexuality. (LRW)

  2. Navy precision optical interferometer database

    NASA Astrophysics Data System (ADS)

    Ryan, K. K.; Jorgensen, A. M.; Hall, T.; Armstrong, J. T.; Hutter, D.; Mozurkewich, D.

    2012-07-01

    The Navy Precision Optical Interferometer (NPOI) has now been recording astronomical observations for the better part of two decades. During that time period hundreds of thousands of observations have been obtained, with a total data volume of multiple terabytes. Additionally, in the next few years the data rate from the NPOI is expected to increase significantly. To make it easier for NPOI users to search the NPOI observations and to make it easier for them to obtain data, we have constructed a easily accessible and searchable database of observations. The database is based on a MySQL server and uses standard query language (SQL). In this paper we will describe the database table layout and show examples of possible database queries.

  3. GaAs Reliability Database

    NASA Technical Reports Server (NTRS)

    Sacco, T.; Gonzalez, S.; Kayali, S.

    1993-01-01

    The database consists of two main sections, the data references and the device reliability records. The reference section contains 8 fields: reference number, date of publication, authors, article title, publisher, volume, and page numbers.

  4. SUPERSITES INTEGRATED RELATIONAL DATABASE (SIRD)

    EPA Science Inventory

    As part of EPA's Particulate Matter (PM) Supersites Program (Program), the University of Maryland designed and developed the Supersites Integrated Relational Database (SIRD). Measurement data in SIRD include comprehensive air quality data from the 7 Supersite program locations f...

  5. MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL SHOWING INSCRIPTION ON FRONT ELEVATION. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  6. The duty to die and the burdensomeness of living.

    PubMed

    Cholbi, Michael

    2010-10-01

    This article addresses the question of whether the arguments for a duty to die given by John Hardwig, the most prominent philosophical advocate of such a duty, are sound. Hardwig believes that the duty to die is relatively widespread among those with burdensome illnesses, dependencies, or medical conditions. I argue that although there are rare circumstances in which individuals have a duty to die, the situations Hardwig describes are not among these. After reconstructing Hardwig's argument for such a duty, highlighting his central premise that ill, dependent, or aged individuals can impose unfair burdens upon others by continuing to live, I clarify precisely what Hardwig intends by his thesis that many of us have a duty to die. I then show that an important disanalogy exists between an uncontroversial example in which an individual has a duty to die and the situations in which Hardwig proposes individuals have a duty to die. More specifically, in situations where a duty to die exists, an individual's having a duty to die logically implies that those she burdens have a right to kill that individual in self-defense. I then suggest that the burdens that ill, dependent, or aged individuals impose on their families, loved ones, or caregivers do not constitute the kind of threat that warrants the latter killing the former in self-defense. Hence, the duty to die is much rarer than Hardwig supposes. PMID:19222438

  7. Development of intelligent CAD/CAM systems for progressive dies

    NASA Astrophysics Data System (ADS)

    Wang, Fengyin; Xiao, Xia; Li, Jianjun

    1995-08-01

    This paper focuses on the fundamental issues related to the development of intelligent CAD/CAM systems for progressive dies which are used for manufacturing sheet metal parts in mass production. The CAD/CAM functions for sheet metal product design and those for design and manufacture of progressive dies are defined by studying the sheet-metal-product life cycle. The procedures of industrial design and manufacture of progressive dies are reviewed, and the need for intelligent CAD/CAM systems identified. The platforms, environment, and key technologies for the systems design and implementation are discussed. Finally, a prototype CAD/CAM system for progressive dies is introduced.

  8. Small Business Innovations (Integrated Database)

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Because of the diversity of NASA's information systems, it was necessary to develop DAVID as a central database management system. Under a Small Business Innovation Research (SBIR) grant, Ken Wanderman and Associates, Inc. designed software tools enabling scientists to interface with DAVID and commercial database management systems, as well as artificial intelligence programs. The software has been installed at a number of data centers and is commercially available.

  9. World electric power plants database

    SciTech Connect

    2006-06-15

    This global database provides records for 104,000 generating units in over 220 countries. These units include installed and projected facilities, central stations and distributed plants operated by utilities, independent power companies and commercial and self-generators. Each record includes information on: geographic location and operating company; technology, fuel and boiler; generator manufacturers; steam conditions; unit capacity and age; turbine/engine; architect/engineer and constructor; and pollution control equipment. The database is issued quarterly.

  10. HIV transcription is induced in dying cells

    SciTech Connect

    Woloschak, G.E.; Chang-Liu, Chin-Mei; Schreck, S. |; Panozzo, J.; Libertin, C.R.

    1996-02-01

    Using HeLa cells stably transfected with an HIV-LTR-CAT construct, we demonstrated a peak in CAT induction that occurs in viable (but not necessarily cell-division-competent) cells 24 h following exposure to some cell-killing agents. {gamma} rays were the only cell-killing agent which did not induce HIV transcription; this can be attributed to the fact that {gamma}-ray-induced apoptotic death requires functional p53, which is not present in HeLa cells. For all other agents, HIV-LTR induction was dose-dependent and correlated with the amount of cell killing that occurred in the culture. Doses which caused over 99% cell killing induced HIV-LTR transcription maximally, demonstrating that cells that will go on to die by 14 days are the cells expressing HIV-LTR-CAT.

  11. Electron Inelastic-Mean-Free-Path Database

    National Institute of Standards and Technology Data Gateway

    SRD 71 NIST Electron Inelastic-Mean-Free-Path Database (PC database, no charge)   This database provides values of electron inelastic mean free paths (IMFPs) for use in quantitative surface analyses by AES and XPS.

  12. Database Reports Over the Internet

    NASA Technical Reports Server (NTRS)

    Smith, Dean Lance

    2002-01-01

    Most of the summer was spent developing software that would permit existing test report forms to be printed over the web on a printer that is supported by Adobe Acrobat Reader. The data is stored in a DBMS (Data Base Management System). The client asks for the information from the database using an HTML (Hyper Text Markup Language) form in a web browser. JavaScript is used with the forms to assist the user and verify the integrity of the entered data. Queries to a database are made in SQL (Sequential Query Language), a widely supported standard for making queries to databases. Java servlets, programs written in the Java programming language running under the control of network server software, interrogate the database and complete a PDF form template kept in a file. The completed report is sent to the browser requesting the report. Some errors are sent to the browser in an HTML web page, others are reported to the server. Access to the databases was restricted since the data are being transported to new DBMS software that will run on new hardware. However, the SQL queries were made to Microsoft Access, a DBMS that is available on most PCs (Personal Computers). Access does support the SQL commands that were used, and a database was created with Access that contained typical data for the report forms. Some of the problems and features are discussed below.

  13. DMTB: the magnetotactic bacteria database

    NASA Astrophysics Data System (ADS)

    Pan, Y.; Lin, W.

    2012-12-01

    Magnetotactic bacteria (MTB) are of interest in biogeomagnetism, rock magnetism, microbiology, biomineralization, and advanced magnetic materials because of their ability to synthesize highly ordered intracellular nano-sized magnetic minerals, magnetite or greigite. Great strides for MTB studies have been made in the past few decades. More than 600 articles concerning MTB have been published. These rapidly growing data are stimulating cross disciplinary studies in such field as biogeomagnetism. We have compiled the first online database for MTB, i.e., Database of Magnestotactic Bacteria (DMTB, http://database.biomnsl.com). It contains useful information of 16S rRNA gene sequences, oligonucleotides, and magnetic properties of MTB, and corresponding ecological metadata of sampling sites. The 16S rRNA gene sequences are collected from the GenBank database, while all other data are collected from the scientific literature. Rock magnetic properties for both uncultivated and cultivated MTB species are also included. In the DMTB database, data are accessible through four main interfaces: Site Sort, Phylo Sort, Oligonucleotides, and Magnetic Properties. References in each entry serve as links to specific pages within public databases. The online comprehensive DMTB will provide a very useful data resource for researchers from various disciplines, e.g., microbiology, rock magnetism and paleomagnetism, biogeomagnetism, magnetic material sciences and others.

  14. Certifiable database generation for SVS

    NASA Astrophysics Data System (ADS)

    Schiefele, Jens; Damjanovic, Dejan; Kubbat, Wolfgang

    2000-06-01

    In future aircraft cockpits SVS will be used to display 3D physical and virtual information to pilots. A review of prototype and production Synthetic Vision Displays (SVD) from Euro Telematic, UPS Advanced Technologies, Universal Avionics, VDO-Luftfahrtgeratewerk, and NASA, are discussed. As data sources terrain, obstacle, navigation, and airport data is needed, Jeppesen-Sanderson, Inc. and Darmstadt Univ. of Technology currently develop certifiable methods for acquisition, validation, and processing methods for terrain, obstacle, and airport databases. The acquired data will be integrated into a High-Quality Database (HQ-DB). This database is the master repository. It contains all information relevant for all types of aviation applications. From the HQ-DB SVS relevant data is retried, converted, decimated, and adapted into a SVS Real-Time Onboard Database (RTO-DB). The process of data acquisition, verification, and data processing will be defined in a way that allows certication within DO-200a and new RTCA/EUROCAE standards for airport and terrain data. The open formats proposed will be established and evaluated for industrial usability. Finally, a NASA-industry cooperation to develop industrial SVS products under the umbrella of the NASA Aviation Safety Program (ASP) is introduced. A key element of the SVS NASA-ASP is the Jeppesen lead task to develop methods for world-wide database generation and certification. Jeppesen will build three airport databases that will be used in flight trials with NASA aircraft.

  15. Rice Glycosyltransferase (GT) Phylogenomic Database

    DOE Data Explorer

    Ronald, Pamela

    The Ronald Laboratory staff at the University of California-Davis has a primary research focus on the genes of the rice plant. They study the role that genetics plays in the way rice plants respond to their environment. They created the Rice GT Database in order to integrate functional genomic information for putative rice Glycosyltransferases (GTs). This database contains information on nearly 800 putative rice GTs (gene models) identified by sequence similarity searches based on the Carbohydrate Active enZymes (CAZy) database. The Rice GT Database provides a platform to display user-selected functional genomic data on a phylogenetic tree. This includes sequence information, mutant line information, expression data, etc. An interactive chromosomal map shows the position of all rice GTs, and links to rice annotation databases are included. The format is intended to "facilitate the comparison of closely related GTs within different families, as well as perform global comparisons between sets of related families." [From http://ricephylogenomics.ucdavis.edu/cellwalls/gt/genInfo.shtml] See also the primary paper discussing this work: Peijian Cao, Laura E. Bartley, Ki-Hong Jung and Pamela C. Ronalda. Construction of a Rice Glycosyltransferase Phylogenomic Database and Identification of Rice-Diverged Glycosyltransferases. Molecular Plant, 2008, 1(5): 858-877.

  16. The EMBL Nucleotide Sequence Database.

    PubMed

    Stoesser, G; Tuli, M A; Lopez, R; Sterk, P

    1999-01-01

    The EMBL Nucleotide Sequence Database (http://www.ebi.ac.uk/embl.html) constitutes Europe's primary nucleotide sequence resource. Main sources for DNA and RNA sequences are direct submissions from individual researchers, genome sequencing projects and patent applications. While automatic procedures allow incorporation of sequence data from large-scale genome sequencing centres and from the European Patent Office (EPO), the preferred submission tool for individual submitters is Webin (WWW). Through all stages, dataflow is monitored by EBI biologists communicating with the sequencing groups. In collaboration with DDBJ and GenBank the database is produced, maintained and distributed at the European Bioinformatics Institute (EBI). Database releases are produced quarterly and are distributed on CD-ROM. Network services allow access to the most up-to-date data collection via Internet and World Wide Web interface. EBI's Sequence Retrieval System (SRS) is a Network Browser for Databanks in Molecular Biology, integrating and linking the main nucleotide and protein databases, plus many specialised databases. For sequence similarity searching a variety of tools (e.g. Blitz, Fasta, Blast etc) are available for external users to compare their own sequences against the most currently available data in the EMBL Nucleotide Sequence Database and SWISS-PROT. PMID:9847133

  17. Hubble's View of a Dying Star

    NASA Technical Reports Server (NTRS)

    2003-01-01

    A recent image of a dying star containing strange, complex structures may help explain the death throes of stars and defy our current understanding of physics. The image of protoplanetary nebula IRAS22036+5306 (in the Infrared Astronomical Satellite Point Source Catalog) was taken on Dec. 15, 2001, by the Wide Field and Planetary Camera 2, designed and built by NASA's Jet Propulsion Laboratory, onboard NASA's Hubble Space Telescope. It is one of the best images yet to capture a fleeting period at the end of a Sun-like star's life, called the protoplanetary nebula phase.

    This phase, which looks like a beautiful cloud of glowing gas lit up by ultraviolet light from the star's core, results when a star evolves into a bloated red giant and sheds its outer layers. 'Protoplanetary nebulas are rare objects with short lifetimes,' said JPL astrophysicist Dr. Raghvendra Sahai. 'It has generally been very difficult to obtain images of such objects in which their structure can be resolved in detail.'

    This image is particularly important because it contains a series of what Sahai and his colleagues call 'knotty jets,' blob-like objects emerging along roughly straight lines from the center of the cigar-shaped, bipolar nebula (See insets). There are various theories about what may produce such jets, though it is hard to prove their existence due to their short-lived, episodic nature. Detailed multi-wavelength studies of these nebulas with NASA's Great Observatories are being carried out to understand the nature and origin of these enigmatic jets, and how they may be sculpting shrouds of dying stars into exotic shapes. The Hubble Space Telescope is one of NASA's Great Observatories.

  18. Death and dying: what the patient wants.

    PubMed

    Balducci, L

    2012-04-01

    A good death and a death with dignity may be achieved when death is congruent with the personal values of the patient. It behooves the practitioner to recognize these values and to cater to them. This paper describes effective communication with the dying person, and the partnership of treatment team, patient and family in face of the patient death. To identify and define the patient wishes it is necessary to learn how to interpret the patient's non verbal as often patients are unable to formulate the questions they wish to ask concerning their passing. These difficulties stem from several cultural factors including concern about disturbing the practitioner. It is the treatment team's responsibility to facilitate this discussion. A good death is achieved when symptoms are controlled and when patients and family recognize death as a unique living experience to be treasured as any other living experience. A death with dignity brings healing, that is always possible even when cure is out of reach. Patient's and practitioner's values may be at odd in face of controversial issues including euthanasia, assisted suicide and terminal sedation. Though he/she should not be compelled to execute these requests, the practitioner should be able to entertain an open discussion with the patient concerning these issues. Open communication and reflective listening even in presence of disagreements are the venue of healing. The study of death and dying requires novel approaches including personal narrative and qualitative research to complement traditional research instrument, such as questionnaire that cannot embrace the whole human dimension. PMID:22628417

  19. Clinical Criteria for Physician Aid in Dying.

    PubMed

    Orentlicher, David; Pope, Thaddeus Mason; Rich, Ben A

    2016-03-01

    More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  20. Clinical Criteria for Physician Aid in Dying

    PubMed Central

    Pope, Thaddeus Mason; Rich, Ben A.

    2016-01-01

    Abstract More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  1. L-connect routing of die surface pads to the die edge for stacking in a 3D array

    DOEpatents

    Petersen, Robert W.

    2000-01-01

    Integrated circuit chips and method of routing the interface pads from the face of the chip or die to one or more sidewall surfaces of the die. The interconnection is routed from the face of the die to one or more edges of the die, then routed over the edge of the die and onto the side surface. A new pad is then formed on the sidewall surface, which allows multiple die or chips to be stacked in a three-dimensional array, while enabling follow-on signal routing from the sidewall pads. The routing of the interconnects and formation of the sidewall pads can be carried out in an L-connect or L-shaped routing configuration, using a metalization process such as laser pantography.

  2. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  3. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  4. The IPD and IMGT/HLA database: allele variant databases

    PubMed Central

    Robinson, James; Halliwell, Jason A.; Hayhurst, James D.; Flicek, Paul; Parham, Peter; Marsh, Steven G. E.

    2015-01-01

    The Immuno Polymorphism Database (IPD) was developed to provide a centralized system for the study of polymorphism in genes of the immune system. Through the IPD project we have established a central platform for the curation and publication of locus-specific databases involved either directly or related to the function of the Major Histocompatibility Complex in a number of different species. We have collaborated with specialist groups or nomenclature committees that curate the individual sections before they are submitted to IPD for online publication. IPD consists of five core databases, with the IMGT/HLA Database as the primary database. Through the work of the various nomenclature committees, the HLA Informatics Group and in collaboration with the European Bioinformatics Institute we are able to provide public access to this data through the website http://www.ebi.ac.uk/ipd/. The IPD project continues to develop with new tools being added to address scientific developments, such as Next Generation Sequencing, and to address user feedback and requests. Regular updates to the website ensure that new and confirmatory sequences are dispersed to the immunogenetics community, and the wider research and clinical communities. PMID:25414341

  5. "Dying is dying, that's all": Structural violence and cultural projects in Malawian AIDS proverbs.

    PubMed

    Hayes, Nicole C

    2015-01-01

    This paper examines three Malawian proverbs about AIDS: "AIDS came for people", "Dying is dying, that's all" and "It's in the flour". Proverbs permit Malawians to discuss the otherwise taboo topic of AIDS because they offer a special register and perform a footing shift, a rhetorical manoeuvre that allows the speaker to attribute problematic speech to someone else. The proverbs under consideration convey a sense of powerless in the face of the AIDS epidemic, which is an indicator of the effects of structural violence on the everyday lives of most Malawians. Despite the aura of timeless tradition generally conveyed by proverbs, the author argues that individual Malawians are actually using AIDS proverbs to align themselves with the pursuit of gendered cultural projects, such as multiple concurrent partner sex and transactional sex, which are not traditional at all. PMID:26305155

  6. Regional ontogeny of New England salt marsh die-off.

    PubMed

    Coverdale, Tyler C; Bertness, Mark D; Altieri, Andrew H

    2013-10-01

    Coastal areas are among the world's most productive and highly affected ecosystems. Centuries of human activity on coastlines have led to overexploitation of marine predators, which in turn has led to cascading ecosystem-level effects. Human effects and approaches to mediating them, however, differ regionally due to gradients in biotic and abiotic factors. Salt marsh die-off on Cape Cod, Massachusetts (U.S.A.), triggered by a recreational-fishing-induced trophic cascade that has released herbivorous crabs from predator control, has been ongoing since 1976. Similar salt marsh die-offs have been reported in Long Island Sound and Narragansett Bay (U.S.A.), but the driving mechanism of these die-offs has not been examined. We used field experiments to assess trophic interactions and historical reconstructions of 24 New England marshes to test the hypotheses that recreational fishing and predator depletion are a regional trigger of salt marsh die-off in New England and that die-offs in Long Island Sound and Narragansett Bay are more recent than those on Cape Cod. Predator depletion was the general trigger of marsh die-off and explained differences in herbivorous crab abundance and the severity of die-off across regions. Die-offs in Long Island Sound and Narragansett Bay are following a trajectory similar to die-off on Cape Cod, but are approximately 20 years behind those on Cape Cod. As a result, die-off currently affects 31.2% (SE 2.2) of low-marsh areas in Long Island Sound and Narragansett Bay, less than half the severity of die-off on Cape Cod. Our results contribute to the growing evidence that recreational fishing is an increasing threat to coastal ecosystems and that studying the effects of human activity at regional scales can provide insight into local effects and aid in early detection and potential remediation. PMID:23566036

  7. A database of macromolecular motions.

    PubMed Central

    Gerstein, M; Krebs, W

    1998-01-01

    We describe a database of macromolecular motions meant to be of general use to the structural community. The database, which is accessible on the World Wide Web with an entry point at http://bioinfo.mbb.yale.edu/MolMovDB , attempts to systematize all instances of protein and nucleic acid movement for which there is at least some structural information. At present it contains >120 motions, most of which are of proteins. Protein motions are further classified hierarchically into a limited number of categories, first on the basis of size (distinguishing between fragment, domain and subunit motions) and then on the basis of packing. Our packing classification divides motions into various categories (shear, hinge, other) depending on whether or not they involve sliding over a continuously maintained and tightly packed interface. In addition, the database provides some indication about the evidence behind each motion (i.e. the type of experimental information or whether the motion is inferred based on structural similarity) and attempts to describe many aspects of a motion in terms of a standardized nomenclature (e.g. the maximum rotation, the residue selection of a fixed core, etc.). Currently, we use a standard relational design to implement the database. However, the complexity and heterogeneity of the information kept in the database makes it an ideal application for an object-relational approach, and we are moving it in this direction. Specifically, in terms of storing complex information, the database contains plausible representations for motion pathways, derived from restrained 3D interpolation between known endpoint conformations. These pathways can be viewed in a variety of movie formats, and the database is associated with a server that can automatically generate these movies from submitted coordinates. PMID:9722650

  8. The Chicago Thoracic Oncology Database Consortium: A Multisite Database Initiative

    PubMed Central

    Carey, George B; Tan, Yi-Hung Carol; Bokhary, Ujala; Itkonen, Michelle; Szeto, Kyle; Wallace, James; Campbell, Nicholas; Hensing, Thomas; Salgia, Ravi

    2016-01-01

    Objective: An increasing amount of clinical data is available to biomedical researchers, but specifically designed database and informatics infrastructures are needed to handle this data effectively. Multiple research groups should be able to pool and share this data in an efficient manner. The Chicago Thoracic Oncology Database Consortium (CTODC) was created to standardize data collection and facilitate the pooling and sharing of data at institutions throughout Chicago and across the world. We assessed the CTODC by conducting a proof of principle investigation on lung cancer patients who took erlotinib. This study does not look into epidermal growth factor receptor (EGFR) mutations and tyrosine kinase inhibitors, but rather it discusses the development and utilization of the database involved. Methods:  We have implemented the Thoracic Oncology Program Database Project (TOPDP) Microsoft Access, the Thoracic Oncology Research Program (TORP) Velos, and the TORP REDCap databases for translational research efforts. Standard operating procedures (SOPs) were created to document the construction and proper utilization of these databases. These SOPs have been made available freely to other institutions that have implemented their own databases patterned on these SOPs. Results: A cohort of 373 lung cancer patients who took erlotinib was identified. The EGFR mutation statuses of patients were analyzed. Out of the 70 patients that were tested, 55 had mutations while 15 did not. In terms of overall survival and duration of treatment, the cohort demonstrated that EGFR-mutated patients had a longer duration of erlotinib treatment and longer overall survival compared to their EGFR wild-type counterparts who received erlotinib. Discussion: The investigation successfully yielded data from all institutions of the CTODC. While the investigation identified challenges, such as the difficulty of data transfer and potential duplication of patient data, these issues can be resolved

  9. Can We Humanize Dying in the General Hospital?

    ERIC Educational Resources Information Center

    Fleming, Stephen

    This paper reviews the literature on the behavior and attitudes of medical-nursing personnel toward the dying person and illustrates the frequent conflict between hospital staff and the needs of dying. Inner perturbation stemming from feelings of vicarious suffering, vicarious disintegration, or personal anxiety about death, education deficiencies…

  10. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  11. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  12. Potato Early Dying: Molecular Perspectives on Pathogenicity and Host Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Potato early dying has not received the reputation of being a particularly devastating disease of potato. However, the interaction between the vascular fungus Verticillium dahliae and the root lesion nematode Pratylenchus penetrans to form the early dying complex makes studying this disease very in...

  13. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  14. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  15. 5 Ways to Cope When a Loved One Dies

    MedlinePlus

    ... Cuts? 5 Ways to Cope When a Loved One Dies KidsHealth > For Teens > 5 Ways to Cope When a Loved One Dies Print A A A Text Size en ... presence of other people who knew your loved one can be comforting. Let your emotions be expressed ...

  16. Thoughts about Death and Dying in an African Sample.

    ERIC Educational Resources Information Center

    Gijana, E. W. M.; And Others

    1990-01-01

    Examined attitudes toward death and dying among 163 Xhosa-speaking children and adults in South Africa. Found age, gender, belief in life after death, educational level, and exposure to death and dying were critical factors in formation of attitudes. Findings were similar to those from previous studies in African and western societies. (Author/NB)

  17. Living and Dying: A Window on (Christian) Children's Spirituality

    ERIC Educational Resources Information Center

    Champagne, Elaine

    2008-01-01

    Faith and beliefs about living and dying are fundamental constituents of spiritual development. However, children are seldom asked to talk about their experiences of life and death. This article has a twofold purpose. It first describes children's expressions on living and dying, as heard during a newly developed programme which encourages…

  18. Die Materials for Critical Applications and Increased Production Rates

    SciTech Connect

    David Schwam; John Wallace; Sebastian Birceanu

    2002-11-30

    Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

  19. The design of a die with a vacuum thermal insulation

    NASA Astrophysics Data System (ADS)

    Baginski, A. G.; Utyev, O. M.; Kondratyeva, Y. M.

    2016-04-01

    A new design of a die for the polymer underwater granulation plants has been developed. It differs from similar plants in the design of heat-insulating elements. Vacuum hollows are used as a heat insulator. A vacuumization process does not require a separate operation, and it is conducted simultaneously with connection of all the elements of the die by a brazing method.

  20. WDDD: Worm Developmental Dynamics Database.

    PubMed

    Kyoda, Koji; Adachi, Eru; Masuda, Eriko; Nagai, Yoko; Suzuki, Yoko; Oguro, Taeko; Urai, Mitsuru; Arai, Ryoko; Furukawa, Mari; Shimada, Kumiko; Kuramochi, Junko; Nagai, Eriko; Onami, Shuichi

    2013-01-01

    During animal development, cells undergo dynamic changes in position and gene expression. A collection of quantitative information about morphological dynamics under a wide variety of gene perturbations would provide a rich resource for understanding the molecular mechanisms of development. Here, we created a database, the Worm Developmental Dynamics Database (http://so.qbic.riken.jp/wddd/), which stores a collection of quantitative information about cell division dynamics in early Caenorhabditis elegans embryos with single genes silenced by RNA-mediated interference. The information contains the three-dimensional coordinate values of the outlines of nuclear regions and the dynamics of the outlines over time. The database provides free access to 50 sets of quantitative data for wild-type embryos and 136 sets of quantitative data for RNA-mediated interference embryos corresponding to 72 of the 97 essential embryonic genes on chromosome III. The database also provides sets of four-dimensional differential interference contrast microscopy images on which the quantitative data were based. The database will provide a novel opportunity for the development of computational methods to obtain fresh insights into the mechanisms of development. The quantitative information and microscopy images can be synchronously viewed through a web browser, which is designed for easy access by experimental biologists. PMID:23172286

  1. REDIdb: the RNA editing database

    PubMed Central

    Picardi, Ernesto; Regina, Teresa Maria Rosaria; Brennicke, Axel; Quagliariello, Carla

    2007-01-01

    The RNA Editing Database (REDIdb) is an interactive, web-based database created and designed with the aim to allocate RNA editing events such as substitutions, insertions and deletions occurring in a wide range of organisms. The database contains both fully and partially sequenced DNA molecules for which editing information is available either by experimental inspection (in vitro) or by computational detection (in silico). Each record of REDIdb is organized in a specific flat-file containing a description of the main characteristics of the entry, a feature table with the editing events and related details and a sequence zone with both the genomic sequence and the corresponding edited transcript. REDIdb is a relational database in which the browsing and identification of editing sites has been simplified by means of two facilities to either graphically display genomic or cDNA sequences or to show the corresponding alignment. In both cases, all editing sites are highlighted in colour and their relative positions are detailed by mousing over. New editing positions can be directly submitted to REDIdb after a user-specific registration to obtain authorized secure access. This first version of REDIdb database stores 9964 editing events and can be freely queried at . PMID:17175530

  2. YCRD: Yeast Combinatorial Regulation Database

    PubMed Central

    Wu, Wei-Sheng; Hsieh, Yen-Chen; Lai, Fu-Jou

    2016-01-01

    In eukaryotes, the precise transcriptional control of gene expression is typically achieved through combinatorial regulation using cooperative transcription factors (TFs). Therefore, a database which provides regulatory associations between cooperative TFs and their target genes is helpful for biologists to study the molecular mechanisms of transcriptional regulation of gene expression. Because there is no such kind of databases in the public domain, this prompts us to construct a database, called Yeast Combinatorial Regulation Database (YCRD), which deposits 434,197 regulatory associations between 2535 cooperative TF pairs and 6243 genes. The comprehensive collection of more than 2500 cooperative TF pairs was retrieved from 17 existing algorithms in the literature. The target genes of a cooperative TF pair (e.g. TF1-TF2) are defined as the common target genes of TF1 and TF2, where a TF’s experimentally validated target genes were downloaded from YEASTRACT database. In YCRD, users can (i) search the target genes of a cooperative TF pair of interest, (ii) search the cooperative TF pairs which regulate a gene of interest and (iii) identify important cooperative TF pairs which regulate a given set of genes. We believe that YCRD will be a valuable resource for yeast biologists to study combinatorial regulation of gene expression. YCRD is available at http://cosbi.ee.ncku.edu.tw/YCRD/ or http://cosbi2.ee.ncku.edu.tw/YCRD/. PMID:27392072

  3. Reference ballistic imaging database performance.

    PubMed

    De Kinder, Jan; Tulleners, Frederic; Thiebaut, Hugues

    2004-03-10

    Ballistic imaging databases allow law enforcement to link recovered cartridge cases to other crime scenes and to firearms. The success of these databases has led many to propose that all firearms in circulation be entered into a reference ballistic image database (RBID). To assess the performance of an RBID, we fired 4200 cartridge cases from 600 9mm Para Sig Sauer model P226 series pistols. Each pistol fired two Remington cartridges, one of which was imaged in the RBID, and five additional cartridges, consisting of Federal, Speer, Winchester, Wolf, and CCI brands. Randomly selected samples from the second series of Remington cartridge cases and from the five additional brands were then correlated against the RBID. Of the 32 cartridges of the same make correlated against the RBID, 72% ranked in the top 10 positions. Likewise, of the 160 cartridges of the five different brands correlated against the database, 21% ranked in the top 10 positions. Generally, the ranking position increased as the size of the RBID increased. We obtained similar results when we expanded the RBID to include firearms with the same class characteristics for breech face marks, firing pin impressions, and extractor marks. The results of our six queries against the RBID indicate that a reference ballistics image database of new guns is currently fraught with too many difficulties to be an effective and efficient law enforcement tool. PMID:15036442

  4. Developing a DNA variant database.

    PubMed

    Fung, David C Y

    2008-01-01

    Disease- and locus-specific variant databases have been a valuable resource to clinical and research geneticists. With the recent rapid developments in technologies, the number of DNA variants detected in a typical molecular genetics laboratory easily exceeds 1,000. To keep track of the growing inventory of DNA variants, many laboratories employ information technology to store the data as well as distributing the data and its associated information to clinicians and researchers via the Web. While it is a valuable resource, the hosting of a web-accessible database requires collaboration between bioinformaticians and biologists and careful planning to ensure its usability and availability. In this chapter, a series of tutorials on building a local DNA variant database out of a sample dataset will be provided. However, this tutorial will not include programming details on building a web interface and on constructing the web application necessary for web hosting. Instead, an introduction to the two commonly used methods for hosting web-accessible variant databases will be described. Apart from the tutorials, this chapter will also consider the resources and planning required for making a variant database project successful. PMID:18453092

  5. Die Casting Part Distortion: Prediction and Attenuation

    SciTech Connect

    Dr, R. Allen Miller

    2002-02-12

    The goal of this research was to predict the part deformation and residual stresses after ejection from the die and cooling to room temperature. A finite element model was built to achieve this goal and several modeling techniques were investigated throughout this research. Die-casting is a very complex process and the researchers are faced with a large number of hard to solve physical problems when modeling the process. Several assumptions are made in our simulation model. The first significant assumption is the instantaneous cavity filling. This means that the cavity filling stage is not considered in our model. Considering the cavity filling stage increases the modeling complexity as a result of different flow patterns. expected in the shot sleeve, gate, runner and different cavity features. The flow of gas from the cavity through the vents is another problem that is ignored in our model as a result of this assumption. Our second assumption is that the cast metal has uniform temperature distribution inside the cavity, at the starting point of simulation. This temperature is assumed to be over liquidus limit, i.e. the solid fraction is 0.0% of the cast metal. The third assumption is due to ABAQUS (commercial software used in this research) limitations. ABAQUS cannot deal with multi-phase models; therefore we use solid elements to define the casting instead of multi-phase (liquid/solid) elements. Liquid elements can carry the hydrostatic pressure from the shot sleeve and apply it on the cavity surfaces, while the solid elements do not have this capability. To compensate for this assumption we add the cavity pressure as a boundary condition and apply it on the cavity surface separately from the part. Another issue with this assumption is that, liquid casting can follow the cavity shape when it distorts. With the use of solid elements to represent the casting during its liquid state, it loses this capability to follow the cavity. Several techniques were tested to

  6. Cradle-to-Gate Impact Assessment of a High-Pressure Die-Casting Safety-Relevant Automotive Component

    NASA Astrophysics Data System (ADS)

    Cecchel, Silvia; Cornacchia, Giovanna; Panvini, Andrea

    2016-08-01

    The mass of automotive components has a direct influence on several aspects of vehicle performance, including both fuel consumption and tailpipe emissions, but the real environmental benefit has to be evaluated considering the entire life of the products with a proper life cycle assessment. In this context, the present paper analyzes the environmental burden connected to the production of a safety-relevant aluminum high-pressure die-casting component for commercial vehicles (a suspension cross-beam) considering all the phases connected to its manufacture. The focus on aluminum high-pressure die casting reflects the current trend of the industry and its high energy consumption. This work shows a new method that deeply analyzes every single step of the component's production through the implementation of a wide database of primary data collected thanks to collaborations of some automotive supplier companies. This energy analysis shows significant environmental benefits of aluminum recycling.

  7. Einführung in die Technische Chemie

    NASA Astrophysics Data System (ADS)

    Behr, Arno; Agar, David W.; Jörissen, Jakob

    Die "Technische Chemie" ist ein Lehrfach an Universitäten und Hochschulen. Nach dem die Studierenden der Chemie in den ersten Semestern ihres Studiums ausrei chen de theoretische Kenntnisse in Allgemeiner, Anorganischer, Organischer und Physikalischer Chemie erlangt haben, soll die Technische Chemie einen Blick auf die praktische Anwendung dieser Naturwissenschaft in unserer Wirtschaft lenken. Es gibt keine "biologische Industrie", "physikalische Industrie" oder "mathematische Industrie", wohl aber seit über 150 Jahren eine "chemische Industrie", die in dieser lan gen Zeit zahlreiche chemische Prozesse entwickelt und dazu vielfältige Methoden erarbeitet hat. Das Lehrfach Technische Chemie gibt einen Überblick über diese Pro zesse und Methoden und erleichtert dadurch den Schritt von der Universität zur be ruflichen Praxis.

  8. DOE Global Energy Storage Database

    DOE Data Explorer

    The DOE International Energy Storage Database has more than 400 documented energy storage projects from 34 countries around the world. The database provides free, up-to-date information on grid-connected energy storage projects and relevant state and federal policies. More than 50 energy storage technologies are represented worldwide, including multiple battery technologies, compressed air energy storage, flywheels, gravel energy storage, hydrogen energy storage, pumped hydroelectric, superconducting magnetic energy storage, and thermal energy storage. The policy section of the database shows 18 federal and state policies addressing grid-connected energy storage, from rules and regulations to tariffs and other financial incentives. It is funded through DOE’s Sandia National Laboratories, and has been operating since January 2012.

  9. National Residential Efficiency Measures Database

    DOE Data Explorer

    The National Residential Efficiency Measures Database is a publicly available, centralized resource of residential building retrofit measures and costs for the U.S. building industry. With support from the U.S. Department of Energy, NREL developed this tool to help users determine the most cost-effective retrofit measures for improving energy efficiency of existing homes. Software developers who require residential retrofit performance and cost data for applications that evaluate residential efficiency measures are the primary audience for this database. In addition, home performance contractors and manufacturers of residential materials and equipment may find this information useful. The database offers the following types of retrofit measures: 1) Appliances, 2) Domestic Hot Water, 3) Enclosure, 4) Heating, Ventilating, and Air Conditioning (HVAC), 5) Lighting, 6) Miscellaneous.

  10. The Life Support Database system

    NASA Technical Reports Server (NTRS)

    Likens, William C.

    1991-01-01

    The design and implementation of the database system are described with specific reference to data available from the Build-1 version and techniques for its utilization. The review of the initial documents for the Life Support Database is described in terms of title format and sequencing, and the users are defined as participants in NASA-sponsored life-support research. The software and hardware selections are based respectively on referential integrity and compatibility, and the implementation of the user interface is achieved by means of an applications-programming tool. The current Beta-Test implementation of the system includes several thousand acronyms and bibliographic references as well as chemical properties and exposure limits, equipment, construction materials, and mission data. In spite of modifications in the database the system is found to be effective and a potentially significant resource for the aerospace community.

  11. Stratospheric emissions effects database development

    NASA Technical Reports Server (NTRS)

    Baughcum, Steven L.; Henderson, Stephen C.; Hertel, Peter S.; Maggiora, Debra R.; Oncina, Carlos A.

    1994-01-01

    This report describes the development of a stratospheric emissions effects database (SEED) of aircraft fuel burn and emissions from projected Year 2015 subsonic aircraft fleets and from projected fleets of high-speed civil transports (HSCT's). This report also describes the development of a similar database of emissions from Year 1990 scheduled commercial passenger airline and air cargo traffic. The objective of this work was to initiate, develop, and maintain an engineering database for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burn and emissions of nitrogen oxides (NO(x) as NO2), carbon monoxide, and hydrocarbons (as CH4) have been calculated on a 1-degree latitude x 1-degree longitude x 1-kilometer altitude grid and delivered to NASA as electronic files. This report describes the assumptions and methodology for the calculations and summarizes the results of these calculations.

  12. Stratospheric emissions effects database development

    SciTech Connect

    Baughcum, S.L.; Henderson, S.C.; Hertel, P.S.; Maggiora, D.R.; Oncina, C.A.

    1994-07-01

    This report describes the development of a stratospheric emissions effects database (SEED) of aircraft fuel burn and emissions from projected Year 2015 subsonic aircraft fleets and from projected fleets of high-speed civil transports (HSCT's). This report also describes the development of a similar database of emissions from Year 1990 scheduled commercial passenger airline and air cargo traffic. The objective of this work was to initiate, develop, and maintain an engineering database for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burn and emissions of nitrogen oxides (NO(x) as NO2), carbon monoxide, and hydrocarbons (as CH4) have been calculated on a 1-degree latitude x 1-degree longitude x 1-kilometer altitude grid and delivered to NASA as electronic files. This report describes the assumptions and methodology for the calculations and summarizes the results of these calculations.

  13. Blocks database and its applications.

    PubMed

    Henikoff, J G; Henikoff, S

    1996-01-01

    Protein blocks consist of multiply aligned sequence segments without gaps that represent the most highly conserved regions of protein families. A database of blocks has been constructed by successive application of the fully automated PROTOMAT system to lists of protein family members obtained from Prosite documentation. Currently, Blocks 8.0 based on protein families documented in Prosite 12 consists of 2884 blocks representing 770 families. Searches of the Blocks Database are carried out using protein or DNA sequence queries, and results are returned with measures of significance for both single and multiple block hits. The databse has also proved useful for derivation of amino acid substitution matrices (the Blosum series) and other sets of parameters. WWW and E-mail servers provide access to the database and associated functions, including a block maker for sequences provided by the user. PMID:8743679

  14. Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

    SciTech Connect

    David Schwam; John F. Wallace; Quanyou Zhou

    2002-01-30

    An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

  15. NEOBASE: databasing the neocortical microcircuit.

    PubMed

    Muhammad, Asif Jan; Markram, Henry

    2005-01-01

    Mammals adapt to a rapidly changing world because of the sophisticated perceptual and cognitive function enabled by the neocortex. The neocortex, which has expanded to constitute nearly 80% of the human brain seems to have arisen from repeated duplication of a stereotypical template of neurons and synaptic circuits with subtle specializations in different brain regions and species. Determining the design and function of this microcircuitry is therefore of paramount importance to understanding normal and abnormal higher brain function. Recent advances in recording synaptically-coupled neurons has allowed rapid dissection of the neocortical microcircuitry thus yielding a massive amount of quantitative anatomical, electrical and gene expression data on the neurons and the synaptic circuits that connect the neurons. Due to the availability of the above mentioned data, it has now become imperative to database the neurons of the microcircuit and their synaptic connections. The NEOBASE project, aims to archive the neocortical microcircuit data in a manner that facilitates development of advanced data mining applications, statistical and bioinformatics analyses tools, custom microcircuit builders, and visualization and simulation applications. The database architecture is based on ROOT, a software environment that allows the construction of an object oriented database with numerous relational capabilities. The proposed architecture allows construction of a database that closely mimics the architecture of the real microcircuit, which facilitates the interface with virtually any application, allows for data format evolution, and aims for full interoperability with other databases. NEOBASE will provide an important resource and research tool for studying the microcircuit basis of normal and abnormal neocortical function. The database will be available to local as well as remote users using Grid based tools and technologies. PMID:15923726

  16. The new IAGOS Database Portal

    NASA Astrophysics Data System (ADS)

    Boulanger, Damien; Gautron, Benoit; Thouret, Valérie; Fontaine, Alain

    2016-04-01

    IAGOS (In-service Aircraft for a Global Observing System) is a European Research Infrastructure which aims at the provision of long-term, regular and spatially resolved in situ observations of the atmospheric composition. IAGOS observation systems are deployed on a fleet of commercial aircraft. The IAGOS database is an essential part of the global atmospheric monitoring network. It contains IAGOS-core data and IAGOS-CARIBIC (Civil Aircraft for the Regular Investigation of the Atmosphere Based on an Instrument Container) data. The IAGOS Database Portal (http://www.iagos.fr, damien.boulanger@obs-mip.fr) is part of the French atmospheric chemistry data center AERIS (http://www.aeris-data.fr). The new IAGOS Database Portal has been released in December 2015. The main improvement is the interoperability implementation with international portals or other databases in order to improve IAGOS data discovery. In the frame of the IGAS project (IAGOS for the Copernicus Atmospheric Service), a data network has been setup. It is composed of three data centers: the IAGOS database in Toulouse; the HALO research aircraft database at DLR (https://halo-db.pa.op.dlr.de); and the CAMS data center in Jülich (http://join.iek.fz-juelich.de). The CAMS (Copernicus Atmospheric Monitoring Service) project is a prominent user of the IGAS data network. The new portal provides improved and new services such as the download in NetCDF or NASA Ames formats, plotting tools (maps, time series, vertical profiles, etc.) and user management. Added value products are available on the portal: back trajectories, origin of air masses, co-location with satellite data, etc. The link with the CAMS data center, through JOIN (Jülich OWS Interface), allows to combine model outputs with IAGOS data for inter-comparison. Finally IAGOS metadata has been standardized (ISO 19115) and now provides complete information about data traceability and quality.

  17. Seismic databases of The Caucasus

    NASA Astrophysics Data System (ADS)

    Gunia, I.; Sokhadze, G.; Mikava, D.; Tvaradze, N.; Godoladze, T.

    2012-12-01

    The Caucasus is one of the active segments of the Alpine-Himalayan collision belt. The region needs continues seismic monitoring systems for better understanding of tectonic processes going in the region. Seismic Monitoring Center of Georgia (Ilia State University) is operating the digital seismic network of the country and is also collecting and exchanging data with neighboring countries. The main focus of our study was to create seismic database which is well organized, easily reachable and is convenient for scientists to use. The seismological database includes the information about more than 100 000 earthquakes from the whole Caucasus. We have to mention that it includes data from analog and digital seismic networks. The first analog seismic station in Georgia was installed in 1899 in the Caucasus in Tbilisi city. The number of analog seismic stations was increasing during next decades and in 1980s about 100 analog stations were operated all over the region. From 1992 due to political and economical situation the number of stations has been decreased and in 2002 just two analog equipments was operated. New digital seismic network was developed in Georgia since 2003. The number of digital seismic stations was increasing and in current days there are more than 25 digital stations operating in the country. The database includes the detailed information about all equipments installed on seismic stations. Database is available online. That will make convenient interface for seismic data exchange data between Caucasus neighboring countries. It also makes easier both the seismic data processing and transferring them to the database and decreases the operator's mistakes during the routine work. The database was created using the followings: php, MySql, Javascript, Ajax, GMT, Gmap, Hypoinverse.

  18. YMDB: the Yeast Metabolome Database.

    PubMed

    Jewison, Timothy; Knox, Craig; Neveu, Vanessa; Djoumbou, Yannick; Guo, An Chi; Lee, Jacqueline; Liu, Philip; Mandal, Rupasri; Krishnamurthy, Ram; Sinelnikov, Igor; Wilson, Michael; Wishart, David S

    2012-01-01

    The Yeast Metabolome Database (YMDB, http://www.ymdb.ca) is a richly annotated 'metabolomic' database containing detailed information about the metabolome of Saccharomyces cerevisiae. Modeled closely after the Human Metabolome Database, the YMDB contains >2000 metabolites with links to 995 different genes/proteins, including enzymes and transporters. The information in YMDB has been gathered from hundreds of books, journal articles and electronic databases. In addition to its comprehensive literature-derived data, the YMDB also contains an extensive collection of experimental intracellular and extracellular metabolite concentration data compiled from detailed Mass Spectrometry (MS) and Nuclear Magnetic Resonance (NMR) metabolomic analyses performed in our lab. This is further supplemented with thousands of NMR and MS spectra collected on pure, reference yeast metabolites. Each metabolite entry in the YMDB contains an average of 80 separate data fields including comprehensive compound description, names and synonyms, structural information, physico-chemical data, reference NMR and MS spectra, intracellular/extracellular concentrations, growth conditions and substrates, pathway information, enzyme data, gene/protein sequence data, as well as numerous hyperlinks to images, references and other public databases. Extensive searching, relational querying and data browsing tools are also provided that support text, chemical structure, spectral, molecular weight and gene/protein sequence queries. Because of S. cervesiae's importance as a model organism for biologists and as a biofactory for industry, we believe this kind of database could have considerable appeal not only to metabolomics researchers, but also to yeast biologists, systems biologists, the industrial fermentation industry, as well as the beer, wine and spirit industry. PMID:22064855

  19. The CATDAT damaging earthquakes database

    NASA Astrophysics Data System (ADS)

    Daniell, J. E.; Khazai, B.; Wenzel, F.; Vervaeck, A.

    2011-08-01

    The global CATDAT damaging earthquakes and secondary effects (tsunami, fire, landslides, liquefaction and fault rupture) database was developed to validate, remove discrepancies, and expand greatly upon existing global databases; and to better understand the trends in vulnerability, exposure, and possible future impacts of such historic earthquakes. Lack of consistency and errors in other earthquake loss databases frequently cited and used in analyses was a major shortcoming in the view of the authors which needed to be improved upon. Over 17 000 sources of information have been utilised, primarily in the last few years, to present data from over 12 200 damaging earthquakes historically, with over 7000 earthquakes since 1900 examined and validated before insertion into the database. Each validated earthquake includes seismological information, building damage, ranges of social losses to account for varying sources (deaths, injuries, homeless, and affected), and economic losses (direct, indirect, aid, and insured). Globally, a slightly increasing trend in economic damage due to earthquakes is not consistent with the greatly increasing exposure. The 1923 Great Kanto (214 billion USD damage; 2011 HNDECI-adjusted dollars) compared to the 2011 Tohoku (>300 billion USD at time of writing), 2008 Sichuan and 1995 Kobe earthquakes show the increasing concern for economic loss in urban areas as the trend should be expected to increase. Many economic and social loss values not reported in existing databases have been collected. Historical GDP (Gross Domestic Product), exchange rate, wage information, population, HDI (Human Development Index), and insurance information have been collected globally to form comparisons. This catalogue is the largest known cross-checked global historic damaging earthquake database and should have far-reaching consequences for earthquake loss estimation, socio-economic analysis, and the global reinsurance field.

  20. Diaretinopathy database –A Gene database for diabetic retinopathy

    PubMed Central

    Vidhya, Gopalakrishnan; Anusha, Bhaskar

    2014-01-01

    Diabetic retinopathy, is a microvascular complication of diabetes mellitus and is a major cause of adult blindness. Despite advances in diagnosis and treatment the pathogenesis of diabetic retinopathy is not well understood. Results from epidemiological studies of diabetic patients suggest that there are familial predispositions to diabetes and to diabetic retinopathy. Therefore the main purpose of this database is to help both scientists and doctors in studying the candidate genes responsible for causing diabetic retinopathy. For each candidate gene official symbol, chromosome map, number of exons, GT-AG introns, motif, polymorphic variation and 3D structure are given respectively. In addition to molecular class and function of these genes, this database also provides links to download the corresponding nucleotide and amino acid sequences in FASTA format which may be further used for computational approaches. Therefore this database will increase the understanding of the genetics underlying the development or progression of diabetic retinopathy and will have an impact on future diagnostic, prevention and intervention strategies. Availability The database is freely available at http: diaretinopathydatabase.com PMID:24966527

  1. Compassion in Dying v. State of Washington.

    PubMed

    1996-03-01

    The U.S. Court of Appeals for the Ninth Circuit, sitting en banc, affirmed a district court judgment that ruled unconstitutional a Washington statute banning assisted suicide, as applied to competent, terminally ill adults who wish to obtain prescription medication to hasten their deaths. The statute, which was challenged by a group of patients, physicians, and the nonprofit organization Compassion in Dying, was held to be unconstitutional because it violated the due process clause of the U.S. Constitution. The court took into consideration the interests of the state in protecting life, preventing suicides, preventing undue, arbitrary, or unfair influences on an individual's decision to end his life, and ensuring the integrity of the medical profession. These interests were balanced against an individual's strong liberty interest in determining how and when one's life should end. The court recognized this interest after assessing the growing public support for assisted suicide, changes in the causes of death and medical advances, and Supreme Court cases addressing due process liberty interests. The court then determined that the state's interest, which could be protected by adopting sufficient safeguards, did not outweigh the severe burden placed on the terminally ill, and thus the statute as applied was unconstitutional. PMID:11648417

  2. NICMOS PEERS INTO HEART OF DYING STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

  3. Data exploration systems for databases

    NASA Technical Reports Server (NTRS)

    Greene, Richard J.; Hield, Christopher

    1992-01-01

    Data exploration systems apply machine learning techniques, multivariate statistical methods, information theory, and database theory to databases to identify significant relationships among the data and summarize information. The result of applying data exploration systems should be a better understanding of the structure of the data and a perspective of the data enabling an analyst to form hypotheses for interpreting the data. This paper argues that data exploration systems need a minimum amount of domain knowledge to guide both the statistical strategy and the interpretation of the resulting patterns discovered by these systems.

  4. Staradmin -- Starlink User Database Maintainer

    NASA Astrophysics Data System (ADS)

    Fish, Adrian

    The subject of this SSN is a utility called STARADMIN. This utility allows the system administrator to build and maintain a Starlink User Database (UDB). The principal source of information for each user is a text file, named after their username. The content of each file is a list consisting of one keyword followed by the relevant user data per line. These user database files reside in a single directory. The STARADMIN program is used to manipulate these user data files and automatically generate user summary lists.

  5. Quality control of EUVE databases

    NASA Technical Reports Server (NTRS)

    John, L. M.; Drake, J.

    1992-01-01

    The publicly accessible databases for the Extreme Ultraviolet Explorer include: the EUVE Archive mailserver; the CEA ftp site; the EUVE Guest Observer Mailserver; and the Astronomical Data System node. The EUVE Performance Assurance team is responsible for verifying that these public EUVE databases are working properly, and that the public availability of EUVE data contained therein does not infringe any data rights which may have been assigned. In this poster, we describe the Quality Assurance (QA) procedures we have developed from the approach of QA as a service organization, thus reflecting the overall EUVE philosophy of Quality Assurance integrated into normal operating procedures, rather than imposed as an external, post facto, control mechanism.

  6. NIST Databases on Atomic Spectra

    NASA Astrophysics Data System (ADS)

    Reader, J.; Wiese, W. L.; Martin, W. C.; Musgrove, A.; Fuhr, J. R.

    2002-11-01

    The NIST atomic and molecular spectroscopic databases now available on the World Wide Web through the NIST Physics Laboratory homepage include Atomic Spectra Database, Ground Levels and Ionization Energies for the Neutral Atoms, Spectrum of Platinum Lamp for Ultraviolet Spectrograph Calibration, Bibliographic Database on Atomic Transition Probabilities, Bibliographic Database on Atomic Spectral Line Broadening, and Electron-Impact Ionization Cross Section Database. The Atomic Spectra Database (ASD) [1] offers evaluated data on energy levels, wavelengths, and transition probabilities for atoms and atomic ions. Data are given for some 950 spectra and 70,000 energy levels. About 91,000 spectral lines are included, with transition probabilities for about half of these. Additional data resulting from our ongoing critical compilations will be included in successive new versions of ASD. We plan to include, for example, our recently published data for some 16,000 transitions covering most ions of the iron-group elements, as well as Cu, Kr, and Mo [2]. Our compilations benefit greatly from experimental and theoretical atomic-data research being carried out in the NIST Atomic Physics Division. A new compilation covering spectra of the rare gases in all stages of ionization, for example, revealed a need for improved data in the infrared. We have thus measured these needed data with our high-resolution Fourier transform spectrometer [3]. An upcoming new database will give wavelengths and intensities for the stronger lines of all neutral and singly-ionized atoms, along with energy levels and transition probabilities for the persistent lines [4]. A critical compilation of the transition probabilities of Ba I and Ba II [5] has been completed and several other compilations of atomic transition probabilities are nearing completion. These include data for all spectra of Na, Mg, Al, and Si [6]. Newly compiled data for selected ions of Ne, Mg, Si and S, will form the basis for a new

  7. SEISMIC-REFLECTOR DATABASE SOFTWARE.

    USGS Publications Warehouse

    Wright, Evelyn L.; Hosom, John-Paul

    1986-01-01

    The seismic data analysis (SDA) software system facilitates generation of marine seismic reflector databases composed of reflector depths, travel times, root-mean-square and interval velocities, geographic coordinates, and identifying information. System processes include digitizing of seismic profiles and velocity semblance curves, merging of velocity and navigation data with profile travel-time data, calculation of reflector depths in meters, profile and map graphic displays, data editing and smoothing, and entry of finalized data into a comprehensive database. An overview of concepts, file structures, and programs is presented.

  8. BDB: The Binary Star Database

    NASA Astrophysics Data System (ADS)

    Dluzhnevskaya, O.; Kaygorodov, P.; Kovaleva, D.; Malkov, O.

    2014-05-01

    Description of the Binary star DataBase (BDB, http://bdb.inasan.ru), the world's principal database of binary and multiple systems of all observational types, is presented in the paper. BDB contains data on physical and positional parameters of 100,000 components of 40,000 systems of multiplicity 2 to 20, belonging to various observational types: visual, spectroscopic, eclipsing, etc. Information on these types of binaries is obtained from heterogeneous sources of data - astronomical and. Organization of the information is based on the careful cross-identification of the objects. BDB can be queried by star identifier, coordinates, and other parameters.

  9. A Sandia telephone database system

    SciTech Connect

    Nelson, S.D.; Tolendino, L.F.

    1991-08-01

    Sandia National Laboratories, Albuquerque, may soon have more responsibility for the operation of its own telephone system. The processes that constitute providing telephone service can all be improved through the use of a central data information system. We studied these processes, determined the requirements for a database system, then designed the first stages of a system that meets our needs for work order handling, trouble reporting, and ISDN hardware assignments. The design was based on an extensive set of applications that have been used for five years to manage the Sandia secure data network. The system utilizes an Ingres database management system and is programmed using the Application-By-Forms tools.

  10. CD-ROM-aided Databases

    NASA Astrophysics Data System (ADS)

    Masuyama, Keiichi

    CD-ROM has rapidly evolved as a new information medium with large capacity, In the U.S. it is predicted that it will become two hundred billion yen market in three years, and thus CD-ROM is strategic target of database industry. Here in Japan the movement toward its commercialization has been active since this year. Shall CD-ROM bussiness ever conquer information market as an on-disk database or electronic publication? Referring to some cases of the applications in the U.S. the author views marketability and the future trend of this new optical disk medium.

  11. Coal quality databases: Practical applications

    SciTech Connect

    Finkelman, R.B.; Gross, P.M.K.

    1999-07-01

    Domestic and worldwide coal use will be influenced by concerns about the effects of coal combustion on the local, regional and global environment. Reliable coal quality data can help decision-makers to better assess risks and determine impacts of coal constituents on technological behavior, economic byproduct recovery, and environmental and human health issues. The US Geological Survey (USGS) maintains an existing coal quality database (COALQUAL) that contains analyses of approximately 14,000 col samples from every major coal-producing basin in the US. For each sample, the database contains results of proximate and ultimate analyses; sulfur form data; and major, minor, and trace element concentrations for approximately 70 elements

  12. DDD: Dynamic Database for Diatomics

    NASA Technical Reports Server (NTRS)

    Schwenke, David

    2004-01-01

    We have developed as web-based database containing spectra of diatomic moiecuies. All data is computed from first principles, and if a user requests data for a molecule/ion that is not in the database, new calculations are automatically carried out on that species. Rotational, vibrational, and electronic transitions are included. Different levels of accuracy can be selected from qualitatively correct to the best calculations that can be carried out. The user can view and modify spectroscopic constants, view potential energy curves, download detailed high temperature linelists, or view synthetic spectra.

  13. Database Driven Web Systems for Education.

    ERIC Educational Resources Information Center

    Garrison, Steve; Fenton, Ray

    1999-01-01

    Provides technical information on publishing to the Web. Demonstrates some new applications in database publishing. Discusses the difference between static and database-drive Web pages. Reviews failures and successes of a Web database system. Addresses the question of how to build a database-drive Web site, discussing connectivity software, Web…

  14. Federal Register Document Image Database, Volume 1

    National Institute of Standards and Technology Data Gateway

    NIST Federal Register Document Image Database, Volume 1 (PC database for purchase)   NIST has produced a new document image database for evaluating document analysis and recognition technologies and information retrieval systems. NIST Special Database 25 contains page images from the 1994 Federal Register and much more.

  15. Freshwater Biological Traits Database (External Review Draft)

    EPA Science Inventory

    This draft report discusses the development of a database of freshwater biological traits. The database combines several existing traits databases into an online format. The database is also augmented with additional traits that are relevant to detecting climate change-related ef...

  16. Online Petroleum Industry Bibliographic Databases: A Review.

    ERIC Educational Resources Information Center

    Anderson, Margaret B.

    This paper discusses the present status of the bibliographic database industry, reviews the development of online databases of interest to the petroleum industry, and considers future developments in online searching and their effect on libraries and information centers. Three groups of databases are described: (1) databases developed by the…

  17. European Community Databases: Online to Europe.

    ERIC Educational Resources Information Center

    Hensley, Colin

    1989-01-01

    Describes three groups of databases sponsored by the European Communities Commission: Eurobases, a textual database of the contents of the "Official Journal" of the European Community; the European Community Host Organization (ECHO) databases, which offer multilingual information about Europe; and statistical databases. Information on access and…

  18. WMC Database Evaluation. Case Study Report

    SciTech Connect

    Palounek, Andrea P. T

    2015-10-29

    The WMC Database is ultimately envisioned to hold a collection of experimental data, design information, and information from computational models. This project was a first attempt at using the Database to access experimental data and extract information from it. This evaluation shows that the Database concept is sound and robust, and that the Database, once fully populated, should remain eminently usable for future researchers.

  19. Building Databases for Education. ERIC Digest.

    ERIC Educational Resources Information Center

    Klausmeier, Jane A.

    This digest provides a brief explanation of what a database is; explains how a database can be used; identifies important factors that should be considered when choosing database management system software; and provides citations to sources for finding reviews and evaluations of database management software. The digest is concerned primarily with…

  20. Compaction die for forming a solid annulus on a right circular cylinder. [Patent application

    DOEpatents

    Harlow, J.L.

    1981-09-14

    A compacting die is disclosed wherein the improvement comprises providing a screen in the die cavity, the screen being positioned parallel to the side walls of said die and dividing the die cavity into center and annular compartments. In addition, the use of this die in a method for producing an annular clad ceramic fuel material is disclosed.