Sample records for design-study case petroleum

  1. A case study of ISO 11064 in control centre design in the Norwegian petroleum industry.

    PubMed

    Aas, Andreas Lumbe; Skramstad, Torbjørn

    2010-12-01

    In 2006-2008 we performed a case study for the purpose of assessing the industrial application of the seven part Control Centre (CC) design standard ISO 11064 to identify positive and negative experiences among stakeholders in the Norwegian petroleum sector. We mainly focussed on ISO 11064 Part 1, because this was the most commonly used among the identified stakeholders. ISO 11064 is generally appreciated and applied in the industry, but we did observe a significant variance in use between the different parts of the standard. We also identified potential areas for improvements, like scope and application adaptation. Thus we suggest a more goal-based approach based on one normative part only. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. Geostatistics and petroleum geology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hohn, M.E.

    1988-01-01

    The book reviewed is designed as a practical guide to geostatistics or kriging for the petroleum geologists. The author's aim in the book is to explain geostatistics as a working tool for petroleum geologists through extensive use of case-study material mostly drawn from his own research in gas potential evaluation in West Virginia. Theory and mathematics are pared down to immediate needs.

  3. [The case-case-time-control study design].

    PubMed

    Wang, Jing; Zhuo, Lin; Zhan, Siyan

    2014-12-01

    Although the 'self-matched case-only studies' (such as the case-cross-over or self-controlled case-series method) can control the time-invariant confounders (measured or unmeasured) through design of the study, however, they can not control those confounders that vary with time. A bidirectional case-crossover design can be used to adjust the exposure-time trends. In the areas of pharmaco-epidemiology, illness often influence the future use of medications, making a bidirectional study design problematic. Suissa's case-time-control design combines the case-crossover and the case-control design which could adjust for exposure-trend bias, but the control group may reintroduce selection bias, if the matching does not go well. We propose a "case-case-time-control" design which is an extension of the case-time-control design. However, rather than using a sample of external controls, we choose those future cases as controls for current cases to counter the bias that arising from temporal trends caused by exposure to the target of interest. In the end of this article we will discuss the strength and limitations of this design based on an applied example.

  4. Petroleum: a series of 25 cases.

    PubMed

    Gnaiger-Rathmanner, J; Schneider, A; Loader, B; Böhler, M; Frass, M; Singer, S R; Oberbaum, M

    2008-04-01

    This study is based on 25 well documented reports of cases which responded well to treatment with Petroleum. Materia medica data were compared with results in contemporary clinical practice. Many patients had characteristic skin problems; children often had recurrent or chronic upper respiratory tract problems. The most prominent mental feature is a quiet, withdrawn or stubborn disposition. The mental symptoms may be difficult to recognise. Detailed documentation in daily practice can be helpful for preserving data of the effect of a medicine; confirmation of statements given in materia medica; improving understanding of homeopathic medicines and differentiating the indications for medicines.

  5. Alternative designs for petroleum product storage tanks for groundwater protection.

    PubMed

    Oke Adeleke, Samson

    In developing countries, there are numerous occurrences of petroleum product spillage in groundwater. The current practice of burying storage tanks beneath the surface without adequate safety devices facilitates this phenomenon. Underground tanks rust and leak, and spilled petroleum products migrate downward. The movement of the oil in the soil depends on its viscosity and quantity, the permeability of the soil/rock, and the presence of fractures within the rock. The oil spreads laterally in the form of a thin pancake due to its lower specific gravity, and soluble components dissolve in water. The pollution plume of petroleum products and dissolved phases moves in the direction of groundwater flow in the aquifer within the pores of soil and sediments or along fractures in basement complex areas. Most communities reply heavily on groundwater for potable and industrial supplies. However, the sustainability of this resource is under threat in areas where there are filling stations as a result of significant groundwater contamination from petroleum product spillage. Drinking water becomes unpalatable when it contains petroleum products in low concentrations, and small quantities may contaminate large volumes of water. Considering the losses incurred from spillage, the cost of cleaning the aquifer, and the fact that total cleansing and attenuation is impossible, the need to prevent spillage and if it happens to prevent it from getting into the groundwater system is of paramount importance. This paper proposes alternative design procedures with a view to achieving these objectives.

  6. Beyond the petroleum system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Magoon, L.B.; Sanchez, R.M.O.

    1995-12-01

    The first joint AAPG/AMGP (Association of Mexican Petroleum Geologists) Hedberg Conference on {open_quotes}Geologic Aspects of Petroleum Systems{close_quotes} was held October 2-6, 1994, in Mexico City, Mexico. This research conference attracted nearly 150 geoscientists from 15 countries; 41 papers and 27 posters were presented. The opposite response occurred when the petroleum-system concept was presented more than 20 yr ago; it was largely overlooked. In the past decade, however, interest in this concept as an exploration tool has been growing rapidly. The research conference addressed the concept itself, its elements and processes, the tools and methods used to identify a petroleum system,more » and many case studies. We summarize responses by the participants to the following three questions: First, what is gained from using the petroleum-system concept? Second, in what new directions will the petroleum-system concept take us in the future? Third, has anything new come out of this research conference?« less

  7. Evaluating the aquatic toxicity of complex organic chemical mixtures: lessons learned from polycyclic aromatic hydrocarbon and petroleum hydrocarbon case studies.

    PubMed

    Landrum, Peter F; Chapman, Peter M; Neff, Jerry; Page, David S

    2012-04-01

    Experimental designs for evaluating complex mixture toxicity in aquatic environments can be highly variable and, if not appropriate, can produce and have produced data that are difficult or impossible to interpret accurately. We build on and synthesize recent critical reviews of mixture toxicity using lessons learned from 4 case studies, ranging from binary to more complex mixtures of primarily polycyclic aromatic hydrocarbons and petroleum hydrocarbons, to provide guidance for evaluating the aquatic toxicity of complex mixtures of organic chemicals. Two fundamental requirements include establishing a dose-response relationship and determining the causative agent (or agents) of any observed toxicity. Meeting these 2 requirements involves ensuring appropriate exposure conditions and measurement endpoints, considering modifying factors (e.g., test conditions, test organism life stages and feeding behavior, chemical transformations, mixture dilutions, sorbing phases), and correctly interpreting dose-response relationships. Specific recommendations are provided. Copyright © 2011 SETAC.

  8. Characteristics of petroleum-contaminated groundwater during natural attenuation: a case study in northeast China.

    PubMed

    Qian, Hong; Zhang, Yuling; Wang, Jiali; Si, Chaoqun; Chen, Zaixing

    2018-01-13

    The objective of this study was to investigate a petroleum-contaminated groundwater site in northeast China. We determined the physicochemical properties of groundwater that contained total petroleum hydrocarbons (TPH) with a view to developing a scientifically robust strategy for controlling and remediating pollution of groundwater already contaminated with petroleum. Samples were collected at regular intervals and were analyzed for dissolved oxygen (DO), iron (Fe 3+ ), sulfate (SO 4 2- ), electrical conductivity (Eh), pH, hydrogen carbonate (HCO 3 - ), and enzyme activities of catalase (CAT), peroxidase (HRP), catechol 1,2-dioxygenase (C12O), and catechol 2,3-dioxygenase (C23O). We used factor analysis in SPSS to determine the main environmental characteristics of the groundwater samples. The results confirmed that the study site was slightly contaminated and that TPH levels were decreasing slightly. Some of the physicochemical variables showed regular fluctuations; DO, Fe 3+ , and SO 4 2- contents decreased gradually, while the concentrations of one of the microbial degradation products, HCO 3 - , increased. Microorganism enzyme activities decreased gradually. The microbiological community deteriorated noticeably during the natural attenuation process, so microbiological degradation of pollutants receded gradually. The HCO 3 - content increased and the pH and Eh decreased gradually. The groundwater environment tended to be reducing.

  9. Systems metabolic engineering design: Fatty acid production as an emerging case study

    PubMed Central

    Tee, Ting Wei; Chowdhury, Anupam; Maranas, Costas D; Shanks, Jacqueline V

    2014-01-01

    Increasing demand for petroleum has stimulated industry to develop sustainable production of chemicals and biofuels using microbial cell factories. Fatty acids of chain lengths from C6 to C16 are propitious intermediates for the catalytic synthesis of industrial chemicals and diesel-like biofuels. The abundance of genetic information available for Escherichia coli and specifically, fatty acid metabolism in E. coli, supports this bacterium as a promising host for engineering a biocatalyst for the microbial production of fatty acids. Recent successes rooted in different features of systems metabolic engineering in the strain design of high-yielding medium chain fatty acid producing E. coli strains provide an emerging case study of design methods for effective strain design. Classical metabolic engineering and synthetic biology approaches enabled different and distinct design paths towards a high-yielding strain. Here we highlight a rational strain design process in systems biology, an integrated computational and experimental approach for carboxylic acid production, as an alternative method. Additional challenges inherent in achieving an optimal strain for commercialization of medium chain-length fatty acids will likely require a collection of strategies from systems metabolic engineering. Not only will the continued advancement in systems metabolic engineering result in these highly productive strains more quickly, this knowledge will extend more rapidly the carboxylic acid platform to the microbial production of carboxylic acids with alternate chain-lengths and functionalities. PMID:24481660

  10. Schematic representation of case study research designs.

    PubMed

    Rosenberg, John P; Yates, Patsy M

    2007-11-01

    The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

  11. A Case Study of Petroleum Degradation in Different Soil Textural Classes.

    PubMed

    Kogbara, Reginald B; Ayotamuno, Josiah M; Worlu, Daniel C; Fubara-Manuel, Isoteim

    2016-01-01

    Patents have been granted for a number of techniques for petroleum biodegradation including use of micro-organisms for degradation of hydrocarbon-based substances and for hydrocarbon degradation in oil reservoirs, but there is a dearth of information on hydrocarbon degradation in different soil textures. Hence, this work investigated the effects of different soil textures on degradation of petroleum hydrocarbons during a six-week period. Five soil textural classes commonly found in Port Harcourt metropolis, Nigeria, namely sand, loamy sand, sandy loam, silty clay and clay, were employed. The soils were contaminated with the same amount of crude oil and then remediated by biostimulation. Selected soil properties were monitored over time. Bacterial numbers declined significantly in the fine soil textures after petroleum contamination, but were either unaffected or increased significantly in the coarser soil textures. Hydrocarbon losses ranged from 42% - 99%; the sandy loam had the highest, while the clay soil had the least total hydrocarbon content (THC) reduction. The total heterotrophic bacterial (THB) counts generally corroborated the THC results. Fold increase in bacterial numbers due to remediation treatment decreased with increasing clay content. The results suggest that higher sand than clay content of soil favours faster hydrocarbon degradation. Hydrocarbon degradation efficiency increased with silt content among soil groupings such as fine and coarse soils but not necessarily with increasing silt content of soil. Thus, there seems to be cut-off sand and clay contents in soil at which the effect of the silt content becomes significant.

  12. WeSaySo Case Study: Designing and Implementing a Case Study for Use in an Instructional Design Class.

    ERIC Educational Resources Information Center

    Graves, Rick; Barnett, Mardee; Gamble, Yolanda; Kolak, Mike

    A case study was used in an instructional design class to facilitate the transfer of conceptual knowledge to concrete concerns and to aid instructional technology graduate students' understanding of the steps involved in designing, analyzing, and implementing an effective needs analysis. The case study involved real events at fictitious company…

  13. Instructional Design: Case Studies in Communities of Practice

    ERIC Educational Resources Information Center

    Keppell, Michael, Ed.

    2007-01-01

    "Instructional Design: Case Studies in Communities of Practice" documents real-world experiences of instructional designers and staff developers who work in communities of practice. "Instructional Design: Case Studies in Communities of Practice" explains the strategies and heuristics used by instructional designers when working…

  14. Systems metabolic engineering design: fatty acid production as an emerging case study.

    PubMed

    Tee, Ting Wei; Chowdhury, Anupam; Maranas, Costas D; Shanks, Jacqueline V

    2014-05-01

    Increasing demand for petroleum has stimulated industry to develop sustainable production of chemicals and biofuels using microbial cell factories. Fatty acids of chain lengths from C6 to C16 are propitious intermediates for the catalytic synthesis of industrial chemicals and diesel-like biofuels. The abundance of genetic information available for Escherichia coli and specifically, fatty acid metabolism in E. coli, supports this bacterium as a promising host for engineering a biocatalyst for the microbial production of fatty acids. Recent successes rooted in different features of systems metabolic engineering in the strain design of high-yielding medium chain fatty acid producing E. coli strains provide an emerging case study of design methods for effective strain design. Classical metabolic engineering and synthetic biology approaches enabled different and distinct design paths towards a high-yielding strain. Here we highlight a rational strain design process in systems biology, an integrated computational and experimental approach for carboxylic acid production, as an alternative method. Additional challenges inherent in achieving an optimal strain for commercialization of medium chain-length fatty acids will likely require a collection of strategies from systems metabolic engineering. Not only will the continued advancement in systems metabolic engineering result in these highly productive strains more quickly, this knowledge will extend more rapidly the carboxylic acid platform to the microbial production of carboxylic acids with alternate chain-lengths and functionalities. © 2014 Wiley Periodicals, Inc.

  15. Pollution prevention and control procedure case study: an application for petroleum refineries.

    PubMed

    Rodríguez, Encarnación; Martínez, Jose-Luis

    2005-06-01

    There is global environmental concern about the pollution from industries and other organizations that should not only be controlled but also prevented. Many alternatives are available to those in charge of environmental protection, but they should be able to draw on a systematic procedure to help implement prevention and control measures. At present, there are three immediate tasks: defining the objective of any environmental study, identifying the potential pollution sources, and selecting alternatives to these sources. However, it is necessary to evaluate these alternatives by using as large a number of criteria as possible and making them cumulative so as to enable the classification and selection of the best available techniques for each pollution source. The petroleum refining industry plays an important role in the developed economies and also has a potential for pollution generation that must be controlled. The best solution for all (i.e., petroleum companies, the public, and the environment) is pollution prevention, because this option will protect all of them and will also reduce costs in terms of lower raw materials consumption as well as reducing potential fines. The procedure we have presented in this article has been applied successfully.

  16. Occupational exposure to petroleum-based and oxygenated solvents and hypopharyngeal and laryngeal cancer in France: the ICARE study.

    PubMed

    Barul, Christine; Carton, Matthieu; Radoï, Loredana; Menvielle, Gwenn; Pilorget, Corinne; Bara, Simona; Stücker, Isabelle; Luce, Danièle

    2018-04-05

    To examine associations between occupational exposure to petroleum-based and oxygenated solvents and the risk of hypopharyngeal and laryngeal cancer. ICARE is a large, frequency-matched population-based case-control study conducted in France. Lifetime occupational history, tobacco smoking and alcohol consumption were collected. Analyses were restricted to men and included 383 cases of hypopharyngeal cancer, 454 cases of laryngeal cancer, and 2780 controls. Job-exposure matrices were used to assess exposure to five petroleum-based solvents (benzene; gasoline; white spirits; diesel, fuels and kerosene; special petroleum products) and to five oxygenated solvents (alcohols; ketones and esters; ethylene glycol; diethyl ether; tetrahydrofuran). Odds ratios (ORs) adjusted for smoking, alcohol drinking and other potential confounders and 95% confidence intervals (CI) were estimated with unconditional logistic models. No significant association was found between hypopharyngeal or laryngeal cancer risk and exposure to the solvents under study. Non-significantly elevated risks of hypopharyngeal cancer were found in men exposed to high cumulative levels of white spirits (OR = 1.46; 95% CI: 0.88-2.43) and tetrahydrofuran (OR = 2.63; 95CI%: 0.55-12.65), with some indication of a dose-response relationship (p for trend: 0.09 and 0.07 respectively). This study provides weak evidence for an association between hypopharyngeal cancer and exposure to white spirits and tetrahydrofuran, and overall does not suggest a substantial role of exposure to petroleum-based or oxygenated solvents in hypopharyngeal or laryngeal cancer risk.

  17. Exposure to benzene in a pooled analysis of petroleum industry case-control studies.

    PubMed

    Glass, D C; Schnatter, A R; Tang, G; Armstrong, T W; Rushton, L

    2017-11-01

    Cases of lymphohematopoietic cancer from three petroleum industry cohorts, matched to controls from the respective cohort, were pooled into single study. Average benzene exposure was quantitatively estimated in ppm for each job based on measured data from the relevant country, adjusted for the specific time period, site and job exposure characteristics and the certainty of the exposure estimate scored. The probability of dermal exposure and of peak exposure was also assessed. Before risk was examined, an exposure estimate comparison and rationalisation exercise was performed across the studies to ensure accuracy and consistency of approach. This article evaluates the final exposure estimates and their use in the risk assessments. Overall benzene exposure estimates were low: 90% of participants accumulated less than 20 ppm-years. Mean cumulative exposure was estimated as 5.15 ppm-years, mean duration was 22 years, and mean exposure intensity was 0.2 ppm. 46% of participants were allocated a peak exposure (>3 ppm at least weekly). 40% of participants had a high probability of dermal exposure (based on the relative probability of at least weekly exposure). There were differences in mean intensity of exposure, probability of peak, and/or dermal exposure associated with job category, job site, and decade of exposure. Terminal Operators handling benzene-containing products were the most highly exposed group, followed by Tanker Drivers carrying gasoline. Exposures were higher around 1940-1950 and lower in more recent decades. Overall confidence in the exposure estimates was highest for recently held jobs and for white-collar jobs. We used sensitivity analyses, which included and excluded case-sets on the basis of exposure certainty scores, to inform the risk assessment. The above analyses demonstrated that the different patterns of exposure across the three studies are largely attributable to differences in jobs, site types, and time frames rather than study. This

  18. A Case Study in Acoustical Design.

    ERIC Educational Resources Information Center

    Ledford, Bruce R.; Brown, John A.

    1992-01-01

    Addresses concerns of both facilities planners and instructional designers in planning for the audio component of group presentations. Factors in the architectural design of enclosures for the reproduction of sound are described, including frequency, amplitude, and reverberation; and a case study for creating an acceptable enclosure is presented.…

  19. Petroleum Technology: From Refinery To Home, Business, and Industry.

    ERIC Educational Resources Information Center

    Shewell, John A.

    1997-01-01

    Discusses the application of petroleum technology and presents activities designed to raise students' awareness of the importance of petroleum-based products in their lives. Includes a handout designed to help students understand the refining processes in which the crude oil from the drill site is transformed into nearly 6,000 petroleum-based…

  20. Case-Cohort Studies: Design and Applicability to Hand Surgery.

    PubMed

    Vojvodic, Miliana; Shafarenko, Mark; McCabe, Steven J

    2018-04-24

    Observational studies are common research strategies in hand surgery. The case-cohort design offers an efficient and resource-friendly method for risk assessment and outcomes analysis. Case-cohorts remain underrepresented in upper extremity research despite several practical and economic advantages over case-control studies. This report outlines the purpose, utility, and structure of the case-cohort design and offers a sample research question to demonstrate its value to risk estimation for adverse surgical outcomes. The application of well-designed case-cohort studies is advocated in an effort to improve the quality and quantity of observational research evidence in hand and upper extremity surgery. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  1. Making a Case for a Blended Approach: The Need for The Design-Based Case Study

    ERIC Educational Resources Information Center

    Deaton, Cynthia C. M.; Malloy, Jacquelynn A.

    2017-01-01

    Design-based case studies address research questions that involve instructional innovations within a bounded system. This blend of case study and design-based research provides a systematic approach to examining instructional innovations that are bounded by perspective, context, and time. Design-based case studies provide a framework for engaging…

  2. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Iraqi petroleum and petroleum products... SANCTIONS REGULATIONS General Definitions § 576.308 Iraqi petroleum and petroleum products. The term Iraqi petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in Iraq...

  3. Risk-Based Evaluation of Total Petroleum Hydrocarbons in Vapor Intrusion Studies

    PubMed Central

    Brewer, Roger; Nagashima, Josh; Kelley, Michael; Heskett, Marvin; Rigby, Mark

    2013-01-01

    This paper presents a quantitative method for the risk-based evaluation of Total Petroleum Hydrocarbons (TPH) in vapor intrusion investigations. Vapors from petroleum fuels are characterized by a complex mixture of aliphatic and, to a lesser extent, aromatic compounds. These compounds can be measured and described in terms of TPH carbon ranges. Toxicity factors published by USEPA and other parties allow development of risk-based, air and soil vapor screening levels for each carbon range in the same manner as done for individual compounds such as benzene. The relative, carbon range makeup of petroleum vapors can be used to develop weighted, site-specific or generic screening levels for TPH. At some critical ratio of TPH to a targeted, individual compound, the overwhelming proportion of TPH will drive vapor intrusion risk over the individual compound. This is particularly true for vapors associated with diesel and other middle distillate fuels, but can also be the case for low-benzene gasolines or even for high-benzene gasolines if an adequately conservative, target risk is not applied to individually targeted chemicals. This necessitates a re-evaluation of the reliance on benzene and other individual compounds as a stand-alone tool to evaluate vapor intrusion risk associated with petroleum. PMID:23765191

  4. Study of variation grain size in desulfurization process of calcined petroleum coke

    NASA Astrophysics Data System (ADS)

    Pintowantoro, Sungging; Setiawan, Muhammad Arif; Abdul, Fakhreza

    2018-04-01

    Indonesia is a country with abundant natural resources, such as mineral mining and petroleum. In petroleum processing, crude oil can be processed into a source of fuel energy such as gasoline, diesel, oil, petroleum coke, and others. One of crude oil potentials in Indonesia is petroleum coke. Petroleum coke is a product from oil refining process. Sulfur reducing process in calcined petroleum cokes can be done by desulfurization process. The industries which have potential to become petroleum coke processing consumers are industries of aluminum smelting (anode, graphite block, carbon mortar), iron riser, calcined coke, foundry coke, etc. Sulfur reducing process in calcined petroleum coke can be done by thermal desulfurization process with alkaline substance NaOH. Desulfurization of petroleum coke process can be done in two ways, which are thermal desulfurization and hydrodesulphurization. This study aims to determine the effect of various grain size on sulfur, carbon, and chemical bond which contained by calcined petroleum coke. The raw material use calcined petroleum coke with 0.653% sulfur content. The grain size that used in this research is 50 mesh, then varied to 20 mesh and 100 mesh for each desulfurization process. Desulfurization are tested by ICP, UV-VIS, and FTIR to determine levels of sulfur, carbon, chemical bonding and sulfur dissolved water which contained in the residual washing of calcined petroleum coke. From various grain size that mentioned before, the optimal value is on 100 mesh grain size, where the sulfur content in petroleum coke is 0.24% and carbon content reaches the highest level of 97.8%. Meanwhile for grain size 100 mesh in the desulfurization process is enough to break the chemical bonds of organic sulfur in petroleum coke.

  5. User Design: A Case Study on Corporate Change

    ERIC Educational Resources Information Center

    Pastore, Raymond S.; Carr-Chellman, Alison A.; Lohmann, Neal

    2011-01-01

    The purpose of this study was to examine the effects of implementing user design strategies within the corporate culture. Using a case study design approach, this article explores the change process within a "Fortune" 100 company in which users were given significant decision-making powers. The main focus is on the unique nature of user design in…

  6. Petroleum and Political Change in Mexico,

    DTIC Science & Technology

    1980-01-01

    and exploitation of our petroleum resources." The argument continued that "private entrepreneurs are disposed to work in this area under the control of...membership was designed to jar the non-petroleum export sector into a more competitive posture, thereby incresing exports from that sector and diminishing

  7. Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

    ERIC Educational Resources Information Center

    Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

    2017-01-01

    Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

  8. The Strategic Petroleum Reserve: United States energy security, oil politics, and petroleum reserves policies in the twentieth century

    NASA Astrophysics Data System (ADS)

    Beaubouef, Bruce Andre

    The history of U.S. petroleum reserves policies in the twentieth century, including the Strategic Petroleum Reserve (SPR) program, provides a case study of the economic and political aspects of national security, and shows the ways in which the American political economy influences national security. One key problem plagued federal petroleum reserve programs and proposals throughout the twentieth century. In a political economy which traditionally placed strong emphasis upon the sanctity of private property and free markets, could the government develop an emergency petroleum reserve policy despite opposition from the private sector? Previous literature on the SPR and oil-stockpiling programs has largely disregarded the historical perspective, focusing instead upon econometric models, suggesting future oil-stockpiling policy options. This study will also make conclusions about the future of governmental oil-stockpiling policies, particularly with regard to the SPR program, but it will do so informed by a systematic history of the emergency petroleum reserve impulse in the twentieth century. Through a study of the emergency petroleum reserve impulse, one can see how the American political economy of oil and energy changed over the twentieth century. As petroleum became crucial to the military and then economic security of the United States, the federal government sought to develop emergency petroleum reserves first for the military, then for the civilian economy. But while the American petroleum industry could deliver the energy "goods" to American energy consumers at a reasonable price, the companies reigned supreme in the political equation. While that was true, federal petroleum reserve programs and proposals conflicted with and were overwhelmed by the historic American tradition of individual economic and private property rights. The depletion of American petroleum reserves changed that political equation, and the ensuing energy crises of the 1970s not only

  9. Case-control studies in diabetes. Do they really use a case-control design?

    PubMed

    Ramos, Analía; Mendoza, Lilian Cristina; Rabasa, Fernanda; Bolíbar, Ignasi; Puig, Teresa; Corcoy, Rosa

    2017-07-01

    Studies defined as case-control do not always use this design. We aimed to estimate the frequency of mislabelled case-control studies in published articles in the area of diabetes and to identify the predictors of incorrect labelling. We searched Medline and Web of Science for articles with "diabetes" and "case control" in title and filtered for language (English/Romance) and period (January 2010-December 2014). Inclusion criteria were: (1) statement to use a case-control design in title, (2) to be a final full-length publication and (3) to have original data in the area of diabetes. Three independent reviewers went through titles, looked for full texts and reviewed them. Discrepancies were settled with a fourth reviewer. Expert epidemiologist advice was requested in case of doubt. case-control mislabelling; addressed predictors: publication year, journal impact factor and journal subject. proportion of mislabelled CC articles and assessment of predictors by multivariate logistic regression analysis. We retrieved 362 articles, 251 of them fulfilling inclusion criteria. The proportion of mislabelled CC studies was 43.8% (confidence interval 95% 37.7-50.0%). Most mislabelled studies had a cross-sectional design (82.7%). Predictors of mislabelling were publication year, journal impact factor and journal area. A relevant subset of studies defined as case-control in the area of diabetes correspond to mislabelled cross-sectional studies. Incorrect labelling misleads readers regarding the interpretation of results and the cause-effect hypothesis. Researchers, reviewers and editors should be aware of and commit to settle this issue.

  10. Theory of bargaining between multinational corporations and developing countries over mineral and petroleum-extraction contracts

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, P.G.

    1987-01-01

    The history of negotiations between multinational corporations and less-developed countries involved in mineral and petroleum extraction has been widely examined. Virtually all case studies of the history of negotiations over these contracts demonstrate that, over time, the contracts tend to be renegotiated on terms more favorable to the developing country. This thesis begins by examining three case studies of negotiations between Third World countries and mineral or petroleum extracting multinational corporations: bauxite in Jamaica, petroleum in Indonesia, and copper in Chile. Evidence is presented to demonstrate that the history of negotiations in Jamaica and Indonesia is inconsistent with the oftenmore » cited theory (Morgan (1975)) that the LDC's increase in profit-share stems from the country's development of negotiating, supervisory, and operating skills. However, in all of these case studies, renegotiations often took place when the country was experiencing an economic or political crisis. The contract renegotiations appear to be an (often successful) attempt by the ruling regime to maintain power. Another aspect of mineral and petroleum extraction is that investment tends to be lumpy. Typically, mineral and petroleum extraction involves an enormous initial investment within the sovereign territory of the LDC, generally financed by the MNC.« less

  11. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY IRAQ STABILIZATION AND INSURGENCY... petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in Iraq, including any Iraqi-origin oil inventories, wherever located. ...

  12. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY IRAQ STABILIZATION AND INSURGENCY... petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in Iraq, including any Iraqi-origin oil inventories, wherever located. ...

  13. 31 CFR 576.308 - Iraqi petroleum and petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY IRAQ STABILIZATION AND INSURGENCY... petroleum and petroleum products means any petroleum, petroleum products, or natural gas originating in Iraq, including any Iraqi-origin oil inventories, wherever located. ...

  14. A comparative study of the rheological and sensory properties of a petroleum-free and a petroleum-based cosmetic cream.

    PubMed

    Wang, Fan C; Marangoni, Alejandro G

    A petroleum-free skin cream was developed using food-grade ingredients. The rheological and sensorial properties of this petroleum-free skin cream were compared to a commercially available petroleum-based skin cream. Specifically, large-amplitude oscillatory shear (LAOS) characterization of the two skin creams was performed. The petroleum-free skin cream showed similar linear and nonlinear viscoelastic rheological properties, comparable skin hydration functions, and consumer acceptance as the commercially available skin cream. A schematic diagram aiming to correlate the physical and sensorial properties of skin cream was also proposed at the end of the work. Results of this work could provide the cosmetic industry necessary information for the development of alternatives for petroleum-based skin creams.

  15. World petroleum supplies

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    A number of conclusions by political conservatives about the fate of world petroleum supplies have been emerging lately. Among the most recent of them arose from discussions, held at the 1983 spring meeting of the American Association for the Advancement of Science (AAAS), which focused on the environment and resource study entitled “The Global 2000 Report” (New Scientist, June 9, 1983). Fred Singer, representing the Heritage Foundation of Washington, D.C., criticized the report, which predicted shortages in the near future, saying that the current world-wide oil glut will continue beyond the year 2000. Alternatives to the use of petroleum are a part of the cause. Singer argued that conservation, nuclear energy, and other petroleum substitutes will continue to suppress the demand for petroleum. In addition, according to other evaluations, exploration for petroleum and natural gas has not really begun.

  16. APPLICATION OF SPATIAL INFORMATION TECHNOLOGY TO PETROLEUM RESOURCE ASSESSMENT ANALYSIS.

    USGS Publications Warehouse

    Miller, Betty M.; Domaratz, Michael A.

    1984-01-01

    Petroleum resource assessment procedures require the analysis of a large volume of spatial data. The US Geological Survey (USGS) has developed and applied spatial information handling procedures and digital cartographic techniques to a recent study involving the assessment of oil and gas resource potential for 74 million acres of designated and proposed wilderness lands in the western United States. The part of the study which dealt with the application of spatial information technology to petroleum resource assessment procedures is reviewed. A method was designed to expedite the gathering, integrating, managing, manipulating and plotting of spatial data from multiple data sources that are essential in modern resource assessment procedures.

  17. Reservoirs and petroleum systems of the Gulf Coast

    USGS Publications Warehouse

    Pitman, Janet K.

    2010-01-01

    This GIS product was designed to provide a quick look at the ages and products (oil or gas) of major reservoir intervals with respect to the different petroleum systems that have been identified in the Gulf Coast Region. The three major petroleum source-rock systems are the Tertiary (Paleocene-Eocene) Wilcox Formation, Cretaceous (Turonian) Eagle Ford Formation, and Jurassic (Oxfordian) Smackover Formation. The ages of the reservoir units extend from Jurassic to Pleistocene. By combining various GIS layers, the user can gain insights into the maximum extent of each petroleum system and the pathways for petroleum migration from the source rocks to traps. Interpretations based on these data should improve development of exploration models for this petroleum-rich province.

  18. Petroleum Processing Wastes.

    ERIC Educational Resources Information Center

    Baker, D. A.

    1978-01-01

    Presents a literature review of the petroleum processing wastes, covering publications of 1977. This review covers studies such as the use of activated carbon in petroleum and petrochemical waste treatment. A list of 15 references is also presented. (HM)

  19. Liquefied petroleum gas (LPG) poisoning: report of two cases and review of the literature.

    PubMed

    Fukunaga, T; Yamamoto, H; Tanegashima, A; Yamamoto, Y; Nishi, K

    1996-10-25

    Two autopsy cases of men who died while connecting a liquefied petroleum gas (LPG) pipe are reported. Their blood concentrations of propane (the main content of LPG) were 0.12 and 3.40 mg/100 g, respectively. The cause of death after exposure of LPG has generally been considered to be asphyxia from hypoxia. The large differences in the blood propane levels found here and reported in the literature, however, suggest that direct toxic effects of propane poisoning may be the cause of death in some cases. Propane concentrations and the cause of death are reviewed and discussed.

  20. Designing a Gamified Online Course: A Preliminary Case Study

    ERIC Educational Resources Information Center

    Grabowski, Jeremiah Stanley

    2017-01-01

    This exploratory case study delves into the instructional design of a gamified online course. The study focuses on how the professor incorporated game elements into a graduate-level online course. Participants in the gamified course were pre- and in-service mathematics teachers. The qualitative case study used two sources of data, an interview…

  1. Bioremediation of Petroleum Hydrocarbon Contaminated Sites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fallgren, Paul

    Bioremediation has been widely applied in the restoration of petroleum hydrocarbon-contaminated. Parameters that may affect the rate and efficiency of biodegradation include temperature, moisture, salinity, nutrient availability, microbial species, and type and concentration of contaminants. Other factors can also affect the success of the bioremediation treatment of contaminants, such as climatic conditions, soil type, soil permeability, contaminant distribution and concentration, and drainage. Western Research Institute in conjunction with TechLink Environmental, Inc. and the U.S. Department of Energy conducted laboratory studies to evaluate major parameters that contribute to the bioremediation of petroleum-contaminated drill cuttings using land farming and to develop amore » biotreatment cell to expedite biodegradation of hydrocarbons. Physical characteristics such as soil texture, hydraulic conductivity, and water retention were determined for the petroleum hydrocarbon contaminated soil. Soil texture was determined to be loamy sand to sand, and high hydraulic conductivity and low water retention was observed. Temperature appeared to have the greatest influence on biodegradation rates where high temperatures (>50 C) favored biodegradation. High nitrogen content in the form of ammonium enhanced biodegradation as well did the presence of water near field water holding capacity. Urea was not a good source of nitrogen and has detrimental effects for bioremediation for this site soil. Artificial sea water had little effect on biodegradation rates, but biodegradation rates decreased after increasing the concentrations of salts. Biotreatment cell (biocell) tests demonstrated hydrocarbon biodegradation can be enhanced substantially when utilizing a leachate recirculation design where a 72% reduction of hydrocarbon concentration was observed with a 72-h period at a treatment temperature of 50 C. Overall, this study demonstrates the investigation of the effects of

  2. Interpretive Research Aiming at Theory Building: Adopting and Adapting the Case Study Design

    ERIC Educational Resources Information Center

    Diaz Andrade, Antonio

    2009-01-01

    Although the advantages of case study design are widely recognised, its original positivist underlying assumptions may mislead interpretive researchers aiming at theory building. The paper discusses the limitations of the case study design for theory building and explains how grounded theory systemic process adds to the case study design. The…

  3. Short-Term Energy Outlook Model Documentation: Other Petroleum Products Consumption Model

    EIA Publications

    2011-01-01

    The other petroleum product consumption module of the Short-Term Energy Outlook (STEO) model is designed to provide U.S. consumption forecasts for 6 petroleum product categories: asphalt and road oil, petrochemical feedstocks, petroleum coke, refinery still gas, unfinished oils, and other miscvellaneous products

  4. Future petroleum geologist: discussion

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Davis, G.D.

    1987-07-01

    Robert R. Berg's (1986) article, ''The Future Petroleum Geologist,'' summarizes the findings of the 13-member AAPG Select Committee on The Future Petroleum Geologist appointed by President William L. Fisher in July 1985. While this undertaking is laudable, particularly considering present circumstance in the petroleum industry, the committee has apparently overlooked a vital aspect concerning the future knowledge requirements of the petroleum geologist. Specifically, the Select Committee makes no mention of the need for computer literacy in its list of educational training categories. Obviously, AAPG is well aware of both the interest in computers by its membership and the increasing needmore » for training and familiarity in this discipline. The Select Committee on The Future Petroleum Geologist, while undertaking a difficult and potentially controversial task, has omitted an important aspect of the background requirements for generations of future petroleum geologists; the committee should consider an amendment to their recommendations to reflect this increasingly important field study.« less

  5. Case-control vaccine effectiveness studies: Preparation, design, and enrollment of cases and controls.

    PubMed

    Verani, Jennifer R; Baqui, Abdullah H; Broome, Claire V; Cherian, Thomas; Cohen, Cheryl; Farrar, Jennifer L; Feikin, Daniel R; Groome, Michelle J; Hajjeh, Rana A; Johnson, Hope L; Madhi, Shabir A; Mulholland, Kim; O'Brien, Katherine L; Parashar, Umesh D; Patel, Manish M; Rodrigues, Laura C; Santosham, Mathuram; Scott, J Anthony; Smith, Peter G; Sommerfelt, Halvor; Tate, Jacqueline E; Victor, J Chris; Whitney, Cynthia G; Zaidi, Anita K; Zell, Elizabeth R

    2017-06-05

    Case-control studies are commonly used to evaluate effectiveness of licensed vaccines after deployment in public health programs. Such studies can provide policy-relevant data on vaccine performance under 'real world' conditions, contributing to the evidence base to support and sustain introduction of new vaccines. However, case-control studies do not measure the impact of vaccine introduction on disease at a population level, and are subject to bias and confounding, which may lead to inaccurate results that can misinform policy decisions. In 2012, a group of experts met to review recent experience with case-control studies evaluating the effectiveness of several vaccines; here we summarize the recommendations of that group regarding best practices for planning, design and enrollment of cases and controls. Rigorous planning and preparation should focus on understanding the study context including healthcare-seeking and vaccination practices. Case-control vaccine effectiveness studies are best carried out soon after vaccine introduction because high coverage creates strong potential for confounding. Endpoints specific to the vaccine target are preferable to non-specific clinical syndromes since the proportion of non-specific outcomes preventable through vaccination may vary over time and place, leading to potentially confusing results. Controls should be representative of the source population from which cases arise, and are generally recruited from the community or health facilities where cases are enrolled. Matching of controls to cases for potential confounding factors is commonly used, although should be reserved for a limited number of key variables believed to be linked to both vaccination and disease. Case-control vaccine effectiveness studies can provide information useful to guide policy decisions and vaccine development, however rigorous preparation and design is essential. Published by Elsevier Ltd.

  6. Transitioning from Marketing-Oriented Design to User-Oriented Design: A Case Study

    ERIC Educational Resources Information Center

    Laster, Shari; Stitz, Tammy; Bove, Frank J.; Wise, Casey

    2011-01-01

    The transition to a new architecture and design for an academic library Web site does not always proceed smoothly. In this case study, a library at a large research university hired an outside Web development contractor to create a new architecture and design for the university's Web site using dotCMS, an open-source content management system. The…

  7. Railroad classification yard design methodology study Elkhart Yard Rehabilitation : a case study

    DOT National Transportation Integrated Search

    1980-02-01

    This interim report documents the application of a railroad classification : yard design methodology to CONRAIL's Elkhart Yard Rehabilitation. This : case study effort represents Phase 2 of a larger effort to develop a yard : design methodology, and ...

  8. Railroad classification yard design methodology study : East Deerfield Yard, a case study

    DOT National Transportation Integrated Search

    1980-02-01

    This interim report documents the application of a railroad classification yard design methodology to Boston and Maine's East Deerfield Yard Rehabiliation. This case study effort represents Phase 2 of a larger effort to develop a yard design methodol...

  9. A case study of potential human health impacts from petroleum coke transfer facilities.

    PubMed

    Dourson, Michael L; Chinkin, Lyle R; MacIntosh, David L; Finn, Jennifer A; Brown, Kathleen W; Reid, Stephen B; Martinez, Jeanelle M

    2016-11-01

    Petroleum coke or "petcoke" is a solid material created during petroleum refinement and is distributed via transfer facilities that may be located in densely populated areas. The health impacts from petcoke exposure to residents living in proximity to such facilities were evaluated for a petcoke transfer facilities located in Chicago, Illinois. Site-specific, margin of safety (MOS) and margin of exposure (MOE) analyses were conducted using estimated airborne and dermal exposures. The exposure assessment was based on a combined measurement and modeling program that included multiyear on-site air monitoring, air dispersion modeling, and analyses of soil and surfaces in residential areas adjacent to two petcoke transfer facilities located in industrial areas. Airborne particulate matter less than 10 microns (PM 10 ) were used as a marker for petcoke. Based on daily fence line monitoring, the average daily PM 10 concentration at the KCBX Terminals measured on-site was 32 μg/m 3 , with 89% of 24-hr average PM 10 concentrations below 50 μg/m 3 and 99% below 100 μg/m 3 . A dispersion model estimated that the emission sources at the KCBX Terminals produced peak PM 10 levels attributed to the petcoke facility at the most highly impacted residence of 11 μg/m 3 on an annual average basis and 54 μg/m 3 on 24-hr average basis. Chemical indicators of petcoke in soil and surface samples collected from residential neighborhoods adjacent to the facilities were equivalent to levels in corresponding samples collected at reference locations elsewhere in Chicago, a finding that is consistent with limited potential for off-site exposure indicated by the fence line monitoring and air dispersion modeling. The MOE based upon dispersion model estimates ranged from 800 to 900 for potential inhalation, the primary route of concern for particulate matter. This indicates a low likelihood of adverse health effects in the surrounding community. Implications: Handling of petroleum coke at

  10. Hybrid vehicle assessment. Phase 1: Petroleum savings analysis

    NASA Technical Reports Server (NTRS)

    Levin, R.; Liddle, S.; Deshpande, G.; Trummel, M.; Vivian, H. C.

    1984-01-01

    The results of a comprehensive analysis of near term electric hybrid vehicles are presented, with emphasis on their potential to save significant amounts of petroleum on a national scale in the 1990s. Performance requirements and expected annual usage patterns of these vehicles are first modeled. The projected U.S. fleet composition is estimated, and conceptual hybrid vehicle designs are conceived and analyzed for petroleum use when driven in the expected annual patterns. These petroleum consumption estimates are then compared to similar estimates for projected 1990 conventional vehicles having the same performance and driven in the same patterns. Results are presented in the form of three utility functions and comparisons of sevral conceptual designs are made. The Hybrid Vehicle (HV) design and assessment techniques are discussed and a general method is explained for selecting the optimum energy management strategy for any vehicle mission battery combination. Conclusions and recommendations are presented, and development recommendations are identified.

  11. Congenital Fibrosarcoma and History of Prenatal Exposure to Petroleum Derivatives

    PubMed Central

    Soldin, Offie P.; López-Hernández, Fernando A.; Trasande, Leonardo; Ferrís-Tortajada, Josep

    2012-01-01

    Congenital fibrosarcoma (CFS) is a rare fibrous tissue malignancy that usually presents in the first few years of life. It is unique among human sarcomas in that it has an excellent prognosis. We describe a temporal clustering of a number of cases of CFS and investigate the possible associated prenatal risk factors. The Pediatric Environmental History, a questionnaire developed in our clinic that is instrumental in determining environmental risk factors for tumor-related disease, was essential in documenting the presence or absence of risk factors considered as human carcinogens. We found a history of exposure to petroleum products in four cases of CFS that occurred at a greater than expected rate in a short time frame–an apparent cancer cluster. We call attention to the possibility that exposure to petroleum products raises the risk of developing CFS. While future studies should focus on systematic investigation of CFS and its underlying mechanisms, this report suggests the need for proactive measures to avoid exposure to solvents and petroleum products during pregnancy. PMID:22945410

  12. The influence of petroleum products on the methane fermentation process.

    PubMed

    Choromański, Paweł; Karwowska, Ewa; Łebkowska, Maria

    2016-01-15

    In this study the influence of the petroleum products: diesel fuel and spent engine oil on the sewage sludge digestion process and biogas production efficiency was investigated. Microbiological, chemical and enzymatic analyses were applied in the survey. It was revealed that the influence of the petroleum derivatives on the effectiveness of the methane fermentation of sewage sludge depends on the type of the petroleum product. Diesel fuel did not limit the biogas production and the methane concentration in the biogas, while spent engine oil significantly reduced the process efficacy. The changes in physical-chemical parameters, excluding COD, did not reflect the effect of the tested substances. The negative influence of petroleum products on individual bacterial groups was observed after 7 days of the process, while after 14 days probably some adaptive mechanisms appeared. The dehydrogenase activity assessment was the most relevant parameter to evaluate the effect of petroleum products contamination. Diesel fuel was probably used as a source of carbon and energy in the process, while the toxic influence was observed in case of spent engine oil. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Cancer incidence of workers in the Swedish petroleum industry.

    PubMed Central

    Järvholm, B; Mellblom, B; Norrman, R; Nilsson, R; Nordlinder, R

    1997-01-01

    OBJECTIVES: To estimate the risk of cancer due to occupational exposure to petroleum products in the Swedish transport and refinery industries. METHODS: In a retrospective cohort study the cancer incidence in 4128 men and 191 women, who had worked for at least one year in the petroleum industry, was compared with the incidence in the general population. The job titles and employment times for each person were found in personal files in the industries. The men had on average worked in jobs exposed to petroleum for 11.6 years at the end of the observation period. The cases of cancer were identified by record linkage with the Swedish cancer register. RESULTS: In total there were 146 cases of cancer v 157.6 expected (standardised mortality ratio (SMR) 0.93 90% confidence interval (90% CI) 0.80 to 1.1). Operators at refineries had an increased risk of leukaemia (6 cases v 1.7 expected, 90% CI of relative risk (RR) 1.5 to 7.0). Five of the six cases had started to work at the refineries in the 1950s or later. No other significantly increased risk of cancer was found. Distribution workers had a decreased incidence of lung cancer (no cases, 90% CI of RR 0 to 0.4). CONCLUSIONS: Operators at Swedish refineries had an increased risk of leukaemia. A possible cause is exposure to benzene. There was no increased risk of leukaemia in distribution workers. Distribution workers had a decreased risk of lung cancer. PMID:9423584

  14. Evaluation of a cleanser for petroleum-contaminated skin.

    PubMed

    Phieffer, Laura S; Banks, David M; Bosse, Michael J; Meyer, Martha H; Meyer, Ralph A; Smith, Kevin

    2003-12-01

    Extremity injuries contaminated with petroleum products pose clinical dilemmas. This project was designed to evaluate the efficacy of a dioctyl sulfosuccinate (DS) solution for cleansing petroleum-contaminated skin. One hundred Sprague-Dawley rats were subjected to a contamination protocol followed by a cleansing procedure. Four petroleum contaminants and five cleansing solutions were selected. The protocol consisted of shaving, initial punch biopsy, contamination, precleansing punch biopsy, standardized scrub protocol, and postcleansing punch biopsy. Biopsy samples were analyzed for petroleum residue using fluorometry. The 10% DS solution had the highest reduction of crude oil, grease, and tar: 99.6 +/- 0.4% (mean +/- SD) contaminant reduction for crude oil, 99.8 +/- 0.2% for grease, and 99.8 +/- 0.2% for tar. The other cleansers showed less efficacy (p < 0.05). Concentrated DS appears to be significantly more effective at cleaning petroleum products from skin than the commonly chosen surgical and commercial cleansers.

  15. Multi-model approach to petroleum resource appraisal using analytic methodologies for probabilistic systems

    USGS Publications Warehouse

    Crovelli, R.A.

    1988-01-01

    The geologic appraisal model that is selected for a petroleum resource assessment depends upon purpose of the assessment, basic geologic assumptions of the area, type of available data, time available before deadlines, available human and financial resources, available computer facilities, and, most importantly, the available quantitative methodology with corresponding computer software and any new quantitative methodology that would have to be developed. Therefore, different resource assessment projects usually require different geologic models. Also, more than one geologic model might be needed in a single project for assessing different regions of the study or for cross-checking resource estimates of the area. Some geologic analyses used in the past for petroleum resource appraisal involved play analysis. The corresponding quantitative methodologies of these analyses usually consisted of Monte Carlo simulation techniques. A probabilistic system of petroleum resource appraisal for play analysis has been designed to meet the following requirements: (1) includes a variety of geologic models, (2) uses an analytic methodology instead of Monte Carlo simulation, (3) possesses the capacity to aggregate estimates from many areas that have been assessed by different geologic models, and (4) runs quickly on a microcomputer. Geologic models consist of four basic types: reservoir engineering, volumetric yield, field size, and direct assessment. Several case histories and present studies by the U.S. Geological Survey are discussed. ?? 1988 International Association for Mathematical Geology.

  16. A Field Study of NMR Logging to Quantify Petroleum Contamination in Subsurface Sediments

    NASA Astrophysics Data System (ADS)

    Fay, E. L.; Knight, R. J.; Grunewald, E. D.

    2016-12-01

    Nuclear magnetic resonance (NMR) measurements are directly sensitive to hydrogen-bearing fluids including water and petroleum products. NMR logging tools can be used to detect and quantify petroleum hydrocarbon contamination in the sediments surrounding a well or borehole. An advantage of the NMR method is that data can be collected in both cased and uncased holes. In order to estimate the volume of in-situ hydrocarbon, there must be sufficient contrast between either the relaxation times (T2) or the diffusion coefficients (D) of water and the contaminant. In a field study conducted in Pine Ridge, South Dakota, NMR logging measurements were used to investigate an area of hydrocarbon contamination from leaking underground storage tanks. A contaminant sample recovered from a monitoring well at the site was found to be consistent with a mixture of gasoline and diesel fuel. NMR measurements were collected in two PVC-cased monitoring wells; D and T2 measurements were used together to detect and quantify contaminant in the sediments above and below the water table at both of the wells. While the contrast in D between the fluids was found to be inadequate for fluid typing, the T2 contrast between the contaminant and water in silt enabled the estimation of the water and contaminant volumes. This study shows that NMR logging can be used to detect and quantify in-situ contamination, but also highlights the importance of sediment and contaminant properties that lead to a sufficiently large contrast in T2 or D.

  17. Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

    ERIC Educational Resources Information Center

    Luo, Yi

    2015-01-01

    This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

  18. The contribution of case study design to supporting research on Clubhouse psychosocial rehabilitation.

    PubMed

    Raeburn, Toby; Schmied, Virginia; Hungerford, Catherine; Cleary, Michelle

    2015-10-01

    Psychosocial Clubhouses provide recovery-focused psychosocial rehabilitation to people with serious mental illness at over 300 sites in more than 30 countries worldwide. To deliver the services involved, Clubhouses employ a complex mix of theory, programs and relationships, with this complexity presenting a number of challenges to those undertaking Clubhouse research. This paper provides an overview of the usefulness of case study designs for Clubhouse researchers; and suggests ways in which the evaluation of Clubhouse models can be facilitated. The paper begins by providing a brief explanation of the Clubhouse model of psychosocial rehabilitation, and the need for ongoing evaluation of the services delivered. This explanation is followed by an introduction to case study design, with consideration given to the way in which case studies have been used in past Clubhouse research. It is posited that case study design provides a methodological framework that supports the analysis of either quantitative, qualitative or a mixture of both types of data to investigate complex phenomena in their everyday contexts, and thereby support the development of theory. As such, case study approaches to research are well suited to the Clubhouse environment. The paper concludes with recommendations for future Clubhouse researchers who choose to employ a case study design. While the quality of case study research that explores Clubhouses has been variable in the past, if applied in a diligent manner, case study design has a valuable contribution to make in future Clubhouse research.

  19. Alaska OCS socioeconomic studies program: St. George basin petroleum development scenarios, Anchorage impact analysis. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ender, R.L.; Gorski, S.

    1981-10-01

    The report consists of an update to the Anchorage socioeconomic and physical baseline and infrastructure standards used to forecast impacts with and without OCS oil and gas development in Alaska. This material is found in Technical Report 43, Volumes 1 and 2 entitled 'Gulf of Alaska and Lower Cook Inlet Petroleum Development Scenarios, Anchorage Socioeconomic and Physical Baseline and Anchorage Impact Analysis.' These updates should be read in conjunction with the above report. In addition, the Anchorage base case and petroleum development scenarios for the St. George Basin are given. These sections are written to stand alone without reference.

  20. Re-Os geochronology and Os isotope fingerprinting of petroleum sourced from a Type I lacustrine kerogen: Insights from the natural Green River petroleum system in the Uinta Basin and hydrous pyrolysis experiments

    NASA Astrophysics Data System (ADS)

    Cumming, Vivien M.; Selby, David; Lillis, Paul G.; Lewan, Michael D.

    2014-08-01

    Rhenium-osmium (Re-Os) geochronology of marine petroleum systems has allowed the determination of the depositional age of source rocks as well as the timing of petroleum generation. In addition, Os isotopes have been applied as a fingerprinting tool to correlate oil to its source unit. To date, only classic marine petroleum systems have been studied. Here we present Re-Os geochronology and Os isotope fingerprinting of different petroleum phases (oils, tar sands and gilsonite) derived from the lacustrine Green River petroleum system in the Uinta Basin, USA. In addition we use an experimental approach, hydrous pyrolysis experiments, to compare to the Re-Os data of naturally generated petroleum in order to further understand the mechanisms of Re and Os transfer to petroleum. The Re-Os geochronology of petroleum from the lacustrine Green River petroleum system (19 ± 14 Ma - all petroleum phases) broadly agrees with previous petroleum generation basin models (∼25 Ma) suggesting that Re-Os geochronology of variable petroleum phases derived from lacustrine Type I kerogen has similar systematics to Type II kerogen (e.g., Selby and Creaser, 2005a,b; Finlay et al., 2010). However, the large uncertainties (over 100% in some cases) produced for the petroleum Re-Os geochronology are a result of multiple generation events occurring through a ∼3000-m thick source unit that creates a mixture of initial Os isotope compositions in the produced petroleum phases. The 187Os/188Os values for the petroleum and source rocks at the time of oil generation vary from 1.4 to 1.9, with the mode at ∼1.6. Oil-to-source correlation using Os isotopes is consistent with previous correlation studies in the Green River petroleum system, and illustrates the potential utility of Os isotopes to characterize the spatial variations within a petroleum system. Hydrous pyrolysis experiments on the Green River Formation source rocks show that Re and Os transfer are mimicking the natural system. This

  1. Re-Os geochronology and Os isotope fingerprinting of petroleum sourced from a Type I lacustrine kerogen: insights from the natural Green River petroleum system in the Uinta Basin and hydrous pyrolysis experiments

    USGS Publications Warehouse

    Cumming, Vivien M.; Selby, David; Lillis, Paul G.; Lewan, Michael D.

    2014-01-01

    Rhenium–osmium (Re–Os) geochronology of marine petroleum systems has allowed the determination of the depositional age of source rocks as well as the timing of petroleum generation. In addition, Os isotopes have been applied as a fingerprinting tool to correlate oil to its source unit. To date, only classic marine petroleum systems have been studied. Here we present Re–Os geochronology and Os isotope fingerprinting of different petroleum phases (oils, tar sands and gilsonite) derived from the lacustrine Green River petroleum system in the Uinta Basin, USA. In addition we use an experimental approach, hydrous pyrolysis experiments, to compare to the Re–Os data of naturally generated petroleum in order to further understand the mechanisms of Re and Os transfer to petroleum. The Re–Os geochronology of petroleum from the lacustrine Green River petroleum system (19 ± 14 Ma – all petroleum phases) broadly agrees with previous petroleum generation basin models (∼25 Ma) suggesting that Re–Os geochronology of variable petroleum phases derived from lacustrine Type I kerogen has similar systematics to Type II kerogen (e.g., Selby and Creaser, 2005a, Selby and Creaser, 2005b and Finlay et al., 2010). However, the large uncertainties (over 100% in some cases) produced for the petroleum Re–Os geochronology are a result of multiple generation events occurring through a ∼3000-m thick source unit that creates a mixture of initial Os isotope compositions in the produced petroleum phases. The 187Os/188Os values for the petroleum and source rocks at the time of oil generation vary from 1.4 to 1.9, with the mode at ∼1.6. Oil-to-source correlation using Os isotopes is consistent with previous correlation studies in the Green River petroleum system, and illustrates the potential utility of Os isotopes to characterize the spatial variations within a petroleum system. Hydrous pyrolysis experiments on the Green River Formation source rocks show that Re and Os transfer

  2. Optimal design of studies of influenza transmission in households. I: case-ascertained studies.

    PubMed

    Klick, B; Leung, G M; Cowling, B J

    2012-01-01

    Case-ascertained household transmission studies, in which households including an 'index case' are recruited and followed up, are invaluable to understanding the epidemiology of influenza. We used a simulation approach parameterized with data from household transmission studies to evaluate alternative study designs. We compared studies that relied on self-reported illness in household contacts vs. studies that used home visits to collect swab specimens for virological confirmation of secondary infections, allowing for the trade-off between sample size vs. intensity of follow-up given a fixed budget. For studies estimating the secondary attack proportion, 2-3 follow-up visits with specimens collected from all members regardless of illness were optimal. However, for studies comparing secondary attack proportions between two or more groups, such as controlled intervention studies, designs with reactive home visits following illness reports in contacts were most powerful, while a design with one home visit optimally timed also performed well.

  3. Leukemia mortality by cell type in petroleum workers with potential exposure to benzene.

    PubMed Central

    Raabe, G K; Wong, O

    1996-01-01

    Workers in the petroleum industry are potentially exposed to a variety of petrochemicals, including benzene or benzene-containing liquids. Although a large number of studies of petroleum workers have been conducted to examine leukemia and other cancer risks, few existing studies have investigated cell-type-specific leukemias. One of the major reasons for the lack of cell-type-specific analysis was the small number of deaths by cell type in individual studies. In the present investigation, all cohort studies of petroleum workers in the United States and the United Kingdom were combined into a single database for cell-type-specific leukemia analysis. The majority of these workers were petroleum refinery employees, but production, pipeline, and distribution workers in the petroleum industry were also included. The combined cohort consisted of more than 208,000 petroleum workers, who contributed more than 4.6 million person-years of observation. Based on a meta-analysis of the combined data, cell-type-specific leukemia risks were expressed in terms of standardized mortality ratios (meta-SMRs). The meta-SMR for acute myeloid leukemia was 0.96. The lack of an increase of acute myeloid leukemia was attributed to the low levels of benzene exposure in the petroleum industry, particularly in comparison to benzene exposure levels in some previous studies of workers in other industries, who had been found to experience an increased risk of acute myeloid leukemia. Similarly, no increase in chronic myeloid, acute lymphocytic, or chronic lymphocytic leukemias was found in petroleum workers (meta-SMRs of 0.89, 1.16, and 0.84, respectively). Stratified meta-analyses restricted to refinery studies or to studies with at least 15 years of follow-up yielded similar results. The findings of the present investigation are consistent with those from several recent case-control studies of cell-type-specific leukemia. Patterns and levels of benzene exposure in the petroleum industry are

  4. Petroleum potential of wilderness lands in the Western United States

    USGS Publications Warehouse

    Miller, Betty M.

    1983-01-01

    In 1982-83, the U.S. Geological Survey (USGS) conducted an investigation of the oil and gas potential of the designated and proposed Wilderness Lands in the Western United States. The scope of this study was limited to the assessment of conventional recoverable petroleum resources occurring in the designated and proposed Wilderness Lands of the Western United States that are administered under four Federal agencies: Bureau of Land Management (BLM), U.S. Forest Service (USFS), National Park Service (NPS), and Fish and Wildlife Service (FWS). The total area of the study included approximately 74 million acres of Wilderness Lands in these 11 Western States: Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. The 74 million acres represent 31 percent of the total Federal lands within these 11 Western States. Approximately 49 percent of all the lands in these States are federally owned. The objective of this study was to assemble through various means all the available pertinent information that could be brought together within the USGS and integrate these data into a computer-based digital cartographic data system that was focused upon the single issue of reviewing the known geological and geophysical data to determine the geologic characteristics favorable or unfavorable for the occurrence of petroleum resources in these Wilderness Lands. In a joint effort in the USGS between the Geologic Division (GD) and the National Mapping Division (NMD) all of the mappable information used in this study was prepared and processed by using digital cartographic techniques. These include digitizing the location and boundaries of the Wilderness Lands; acreage calculations; the boundaries of the USGS petroleum provinces; and the geologic and tectonic boundaries within each petroleum province and State. In addition, searches were conducted on well data files which provided the locations and geologic information on over 5,000 wells

  5. The application of petroleum hydrocarbon fingerprint characterization in site investigation and remediation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zemo, D.A.; Bruya, J.E.; Graf, T.E.

    1995-07-01

    Tremendous resources have been and continue to be spent investigating and remediating petroleum hydrocarbon compounds (PHCs) in soil and ground water. Investigating and planning a remedial strategy for sites affected by PHCs is often a challenging task because of the complex chemical nature of the PHCs, the complex regulatory environment related to PHC cleanup, and the use of analytical methods that provide quantitation but not identification f PHCs. From a technical standpoint, the PHC impacting soil and/or ground water is frequently inadequately characterized, both in identification as well as in its general properties (solubility, toxicity). From a regulatory standpoint, promulgatedmore » or recommended total petroleum hydrocarbon (TPH) cleanup levels generally relate to assumed properties of specific unweathered products and are inconsistent among different agencies and regions. Accurately identifying the PHC and its nature, a process known as fingerprint characterization, is critical to the determination of appropriate regulatory goals and design of cost-effective remedial approaches. This paper presents several case studies in which fingerprint characterization made a significant difference in the project outcome.« less

  6. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 2 2011-04-01 2011-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum products...

  7. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum products...

  8. Developing the DESCARTE Model: The Design of Case Study Research in Health Care.

    PubMed

    Carolan, Clare M; Forbat, Liz; Smith, Annetta

    2016-04-01

    Case study is a long-established research tradition which predates the recent surge in mixed-methods research. Although a myriad of nuanced definitions of case study exist, seminal case study authors agree that the use of multiple data sources typify this research approach. The expansive case study literature demonstrates a lack of clarity and guidance in designing and reporting this approach to research. Informed by two reviews of the current health care literature, we posit that methodological description in case studies principally focuses on description of case study typology, which impedes the construction of methodologically clear and rigorous case studies. We draw from the case study and mixed-methods literature to develop the DESCARTE model as an innovative approach to the design, conduct, and reporting of case studies in health care. We examine how case study fits within the overall enterprise of qualitatively driven mixed-methods research, and the potential strengths of the model are considered. © The Author(s) 2015.

  9. Service-Learning and Interior Design: A Case Study

    ERIC Educational Resources Information Center

    Sterling, Mary

    2007-01-01

    The case study approach was used to analyze experiential learning through its three components: knowledge, action, and reflection. Two interior design courses were integrated through a university service-learning project. The restoration/adaptive reuse of a 95-year-old library building was to serve as a prototype for future off-campus…

  10. Integrated Bioprocess Design: A Case Study for Undergraduates.

    ERIC Educational Resources Information Center

    Titchener-Hooker, Nigel; Zhou, Yu-Hong

    2000-01-01

    Presents a case study for use in the teaching of bioprocess design. Taking the production and isolation of the intracellular protein s. cerevisae, demonstrates how undergraduates can use a range of data to construct and then investigate the range of processes flowsheet options available for a process duty. (Author/SAH)

  11. Pannonian Basin Province, Central Europe (Province 4808) -Petroleum Geology, Total Petroleum Systems, and Petroleum Resource Assessment

    USGS Publications Warehouse

    Dolton, Gordon L.

    2006-01-01

    This report deals with the Pannonian Basin Province of Central Europe and summarizes the petroleum geology, which was the basis for assessment, and presents results of that assessment. The Pannonian Basin Province consists of a large compound extensional basin of Neogene age overlying Paleogene basins and interior elements of the greater Alpine foldbelt. Within it, six total petroleum systems (TPS) are defined and six assessment units established for estimation of undiscovered oil and gas resources. Other speculative TPSs were identified but not included for quantitative assessment within this study.

  12. Development and Formative Evaluation of Multimedia Case Studies for Instructional Design and Technology Students

    ERIC Educational Resources Information Center

    Sugar, William

    2014-01-01

    This study describes the development of three case studies that included a combination of multimedia production and instructional design skills within a particular setting. These case studies incorporated real-life incidents from 47 professional instructional designers. These instructional designers described a total of 146 activities involving…

  13. Do your extractable TPH concentrations represent dissolved petroleum? An update on applied research

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zemo, D.A.

    1997-12-31

    Elevated concentrations of {open_quotes}dissolved-phase{close_quotes} extractable total petroleum hydrocarbons (TPH) in groundwater samples can be a significant impediment to site closure in states that regulate groundwater using TPH criteria. These analytical results are inconsistent with petroleum chemistry because of the relatively low water solubility of petroleum products. This paper presents an update of our research into the source of medium- to high-boiling TPH detections in groundwater samples and application of the results to multiple projects. This work follows from a 1995 publication in which positive interferences to the Method 8015M (GC-FID) TPH measurement by soluble, non-petroleum hydrocarbons resulting from intrinsic bioremediationmore » or non-dissolved petroleum adhered to particulates was described. The 1995 paper was largely theoretical and focused on one case study. Since 1995, we have evaluated the source of TPH detections in groundwater at numerous petroleum sites and have demonstrated the significance of interferences to the Method 8015M measurement to the California regulatory community. Our work has shown conclusively that elevated concentrations of extractable TPH are not representative of dissolved petroleum constituents. We have shown that a sample cleanup prior to analysis using silica gel cleanup (to remove polar non-petroleum hydrocarbons) and/or laboratory filtration (to reduce petroleum-affected particulates) is required to overcome the false positives caused by interferences to the Method 8015M measurement.« less

  14. Discrimination of petroleum fluorescence spectra.

    PubMed

    Stelmaszewski, Adam

    2007-01-01

    This paper presents studies of the total spectra (fluorescence-excitation matrix) of petroleum with regard to the utilization of fluorescence for determining petroleum pollutants. Thorough testing of one group, comprising almost forty lubricating oils in the form of their hexane solutions, points out their discrimination.

  15. Design and bidding of UV disinfection equipment -- Case study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Akyurek, M.

    1998-07-01

    Ultraviolet (UV) disinfection systems are being widely considered for application to treated wastewaters, in lieu of conventional chlorination facilities. The number of UV systems operating in the US was approximately 50 in 1984. In 1990 there were over 500 systems, a ten-fold increase. The use of UV disinfection has increased since 1990, and will likely to increase in the future. It is anticipated that as many chlorine disinfection facilities reach their useful life, most of them will be replaced with UV disinfection systems. Several manufacturers offer different UV disinfection equipment. Each offers something different for the designer. There are alsomore » different approaches used in estimating the number of lamps needed for the disinfection system. The lack of standardization in determination of the number of lamps for a UV system poses problems for the designer. Such was the case during the design of the disinfection system for the Watertown, SD Wastewater Treatment Plant (WWRP). The purpose of this paper is to present a case study for the design and bidding of UV disinfection equipment.« less

  16. Case-control study on uveal melanoma (RIFA): rational and design

    PubMed Central

    Schmidt-Pokrzywniak, Andrea; Jöckel, Karl-Heinz; Bornfeld, Norbert; Stang, Andreas

    2004-01-01

    Background Although a rare disease, uveal melanoma is the most common primary intraocular malignancy in adults, with an incidence rate of up to 1.0 per 100,000 persons per year in Europe. Only a few consistent risk factors have been identified for this disease. We present the study design of an ongoing incident case-control study on uveal melanoma (acronym: RIFA study) that focuses on radiofrequency radiation as transmitted by radio sets and wireless telephones, occupational risk factors, phenotypical characteristics, and UV radiation. Methods/Design We conduct a case-control study to identify the role of different exposures in the development of uveal melanoma. The cases of uveal melanoma were identified at the Division of Ophthalmology, University of Essen, a referral centre for tumours of the eye. We recruit three control groups: population controls, controls sampled from those ophthalmologists who referred cases to the Division of Ophthalmology, University of Duisburg-Essen, and sibling controls. For each case the controls are matched on sex and age (five year groups), except for sibling controls. The data are collected from the study participants by short self-administered questionnaire and by telephone interview. During and at the end of the field phase, the data are quality-checked. To estimate the effect of exposures on uveal melanoma risk, we will use conditional logistic regression that accounts for the matching factors and allows to control for potential confounding. PMID:15318944

  17. Optimal design of studies of influenza transmission in households. II: comparison between cohort and case-ascertained studies.

    PubMed

    Klick, B; Nishiura, H; Leung, G M; Cowling, B J

    2014-04-01

    Both case-ascertained household studies, in which households are recruited after an 'index case' is identified, and household cohort studies, where a household is enrolled before the start of the epidemic, may be used to test and estimate the protective effect of interventions used to prevent influenza transmission. A simulation approach parameterized with empirical data from household studies was used to evaluate and compare the statistical power of four study designs: a cohort study with routine virological testing of household contacts of infected index case, a cohort study where only household contacts with acute respiratory illness (ARI) are sampled for virological testing, a case-ascertained study with routine virological testing of household contacts, and a case-ascertained study where only household contacts with ARI are sampled for virological testing. We found that a case-ascertained study with ARI-triggered testing would be the most powerful design while a cohort design only testing household contacts with ARI was the least powerful. Sensitivity analysis demonstrated that these conclusions varied by model parameters including the serial interval and the risk of influenza virus infection from outside the household.

  18. [Study on the constituents of petroleum ether fraction of Buxus microphylla].

    PubMed

    Dai, Zhi-Kai; Liang, Jun; Su, Xiao-Jian; Xu, Qing; Zhang, Hui-Qin

    2009-07-01

    To study the chemical constituents from the petroleum ether fraction of Buxus microphylla. The petroleum ether fraction of Buxus microphylla was isolated and identified by silica gel column chromatography. And the anticancer activity of different chemical constituents was measured by MTT reduction test. Eight compounds were isolated and identified as lupeol (1), butulin (3), beta-sitosterol (4), stigmasterol (5), dibutyl phthalate (6), 3beta, 30-dihydroxy-lup-20 (29) ene (7), daucosterol (8). Compound 7 inhibited KB cells' proliferation in a dose-dependent manner. Compounds 2 - 5, 7, 8 are isolated from this genus for the first time. Compound 7 has certainly anticancer effects.

  19. Engineering Students' Views of Corporate Social Responsibility: A Case Study from Petroleum Engineering.

    PubMed

    Smith, Jessica M; McClelland, Carrie J; Smith, Nicole M

    2017-12-01

    The mining and energy industries present unique challenges to engineers, who must navigate sometimes competing responsibilities and codes of conduct, such as personal senses of right and wrong, professional ethics codes, and their employers' corporate social responsibility (CSR) policies. Corporate social responsibility (CSR) is the current dominant framework used by industry to conceptualize firms' responsibilities to their stakeholders, yet has it plays a relatively minor role in engineering ethics education. In this article, we report on an interdisciplinary pedagogical intervention in a petroleum engineering seminar that sought to better prepare engineering undergraduate students to critically appraise the strengths and limitations of CSR as an approach to reconciling the interests of industry and communities. We find that as a result of the curricular interventions, engineering students were able to expand their knowledge of the social, rather than simply environmental and economic dimensions of CSR. They remained hesitant, however, in identifying the links between those social aspects of CSR and their actual engineering work. The study suggests that CSR may be a fruitful arena from which to illustrate the profoundly sociotechnical dimensions of the engineering challenges relevant to students' future careers.

  20. Petroleum supply monthly, October 1993

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products inmore » the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.« less

  1. Petroleum supply monthly, January 1996

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products inmore » the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.« less

  2. Preparation of activated petroleum coke for removal of naphthenic acids model compounds: Box-Behnken design optimization of KOH activation process.

    PubMed

    Niasar, Hojatallah Seyedy; Li, Hanning; Das, Sreejon; Kasanneni, Tirumala Venkateswara Rao; Ray, Madhumita B; Xu, Chunbao Charles

    2018-04-01

    This study employed Box-Behnken design and response surface methodology to optimize activation parameters for the production of activated petroleum coke (APC) adsorbent from petroleum coke (PC) to achieve highest adsorption capacity for three model naphthenic acids. Activated petroleum coke (APC) adsorbent with a BET surface area of 1726 m 2 /g and total pore volume of 0.85 cc/g was produced at the optimum activation conditions (KOH/coke mass ratio) of 3.0, activation temperature 790 °C, and activation time 3.47 h). Effects of the activation parameters on the adsorption pefromances (adsortion capaciy and kinetics) were investigated. With the APC obtained at the optimum activation condition, the maximum adsorption capacity of 451, 362, and 320 (mg/g) was achieved for 2-naphthoic acid, diphenylacetic acid and cyclohexanepentanoic acid (CP), respectively. Although, generally APC adsorbents with a higher specific surface area and pore volume provide better adsorption capacity, the textural properties (surface areas and pore volume) are not the only parameters determining the APC adsorbents' adsorption capacity. Other parameters such as surface functionalities play effective roles on the adsorption capacity of the produced APC adsorbents for NAs. The KOH activation process, in particular the acid washing step, distinctly reduced the sulfur and metals contents in the raw PC, decreasing the leaching potential of metals from APC adsorbents during adsorption. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Benzene exposure in the petroleum distribution industry associated with leukemia in the United Kingdom: overview of the methodology of a case-control study.

    PubMed Central

    Rushton, L

    1996-01-01

    This paper describes basic principles underlying the methodology for obtaining quantitative estimates of benzene exposure in the petroleum marketing and distribution industry. Work histories for 91 cases of leukemia and 364 matched controls (4 per case) identified for a cohort of oil distribution workers up to the end of 1992 were obtained, primarily from personnel records. Information on the distribution sites, more than 90% of which were closed at the time of data collection, was obtained from site visits and archive material. Industrial hygiene measurements measured under known conditions were assembled for different tasks. These were adjusted for conditions where measured data were not available using variables known to influence exposure, such as temperature, technology, percentage of benzene in fuel handled, products handled, number of loads, and job activity. A quantitative estimate of dermal contact and peak exposure was also made. PMID:9118922

  4. 76 FR 16728 - Announcement of the American Petroleum Institute's Standards Activities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... voluntary standards for equipment, materials, operations, and processes for the petroleum and natural gas... Techniques for Designing and/or Optimizing Gas-lift Wells and Systems, 1st Ed. RP 13K, Chemical Analysis of... Q2, Quality Management Systems for Service Supply Organizations for the Petroleum and Natural Gas...

  5. You and Technology, A High School Case Study Text.

    ERIC Educational Resources Information Center

    Damaskos, Nickander J., Ed.; Smyth, Michael P., Ed.

    This second draft of a manuscript for a high school engineering and technology course uses case studies as its format. The principles associated with various engineering problems are presented along with their effects on daily life. Topics include the computer, the automotive power system, satellite communications, the petroleum industry, water…

  6. 46 CFR 148.04-15 - Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Petroleum coke, uncalcined; petroleum coke, uncalcined and calcined (mixture). 148.04-15 Section 148.04-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... Requirements for Certain Material § 148.04-15 Petroleum coke, uncalcined; petroleum coke, uncalcined and...

  7. Study utilization of extractable petroleum hydrocarbons biodegradation waste as the main material for making solid fuels

    NASA Astrophysics Data System (ADS)

    Hendrianie, Nuniek; Juliastuti, Sri Rachmania; Ar-rosyidah, Fanny Husna; Rochman, Hilal Abdur

    2017-05-01

    Nowadays the existence of energy sources of oil and was limited. Therefore, it was important to searching for new innovations of renewable energy sources by utilizing the waste into a source of energy. On the other hand, the process of extractable petroleum hydrocarbons biodegradation generated sludge that had calorific value and untapped. Because of the need for alternative sources of energy innovation with the concept of zero waste and the fuel potential from extractable petroleum hydrocarbons biodegradation waste, so it was necessary to study the use of extractable petroleum hydrocarbons biodegradation waste as the main material for making solid fuel. In addition, sawdust is a waste that had a great quantities and also had a high calorific value to be mixed with extractable petroleum hydrocarbons biodegradation waste. The purpose of this study was to determine the characteristics of the extractable petroleum hydrocarbons biodegradation waste and to determine the potential and a combination of a mixture of extractable petroleum hydrocarbons biodegradation waste and sawdust which has the best calorific value. The variables of this study was the composition of the waste and sawdust as follows 1:1; 1:3; and 3:1 (mass of sawdust : mass of waste) and time of sawdust carbonization was 10, 15 and 20 minutes. Sawdust was carbonized to get the high heating value. The characteristic of main material and fuel analysis performed with proximate analysis. While the calorific value analysis was performed with a bomb calorimeter. From the research, it was known that extractable petroleum hydrocarbons biodegradation waste had a moisture content of 3.06%; volatile matter 19.98%; ash content of 0.56%; fixed carbon content of 76.4% and a calorific value of 717 cal/gram. And a mixture that had the highest calorific value (4286.5 cal/gram) achieved in comparison sawdust : waste (3:1) by carbonization of sawdust for 20 minutes.

  8. Experimental study of the combined calcination and hydrodesulfurization of high-sulfur green petroleum coke

    NASA Astrophysics Data System (ADS)

    Kilic, Saliha Meltem

    The primary production of aluminum is done by means of the Hall-Heroult process where large amounts of carbon anodes are required and consumed. The quality of carbon anodes used in electrolysis is one of the most important parameters affecting the production of primary aluminum. The anode quality widely depends on the raw materials, one of which is the petroleum coke. Green petroleum coke is produced from the heavy residual fractions of petroleum. Petroleum cokes produced from sour crude oil sources contain high quantity of sulfur. A certain level of sulfur is needed to reduce the anode reactivities; however, the demand for anode-grade coke with acceptable sulfur content is increasing faster than the available supply. High sulfur levels in carbon anodes would have an adverse effect on environment; hence, the desulfurization of high sulfur green petroleum cokes is necessary. There are different ways of desulfurizing green petroleum cokes: solvent extraction, thermal desulfurization, and hydrodesulfurization. Coke produced by solvent extraction is prone to contamination. The thermal approach requires greater energy consumption and causes an increase in coke porosity. The global objective of this master project is to find an alternative solution for desulfurization that will produce quality calcined coke with minimum impact on environment. Hydrodesulfurization seems to be a viable option and was investigated in this study. Water was used for the hydrodesulfurization of commercially available high sulfur green petroleum coke. Different experimental systems were tried during the hydrodesulfurization experiments. A systematic approach was used to investigate the influence of hydrodesulfurization parameters including water injection temperature, duration, and water flow rate as well as coke particle size on the hydrodesulfurization of green petroleum coke. In addition to hydrodesulfurization, a number of thermal desulfurization experiments were carried out with the same

  9. Biological treatment process for removing petroleum hydrocarbons from oil field produced waters

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tellez, G.; Khandan, N.

    1995-12-31

    The feasibility of removing petroleum hydrocarbons from oil fields produced waters using biological treatment was evaluated under laboratory and field conditions. Based on previous laboratory studies, a field-scale prototype system was designed and operated over a period of four months. Two different sources of produced waters were tested in this field study under various continuous flow rates ranging from 375 1/D to 1,800 1/D. One source of produced water was an open storage pit; the other, a closed storage tank. The TDS concentrations of these sources exceeded 50,000 mg/l; total n-alkanes exceeded 100 mg/l; total petroleum hydrocarbons exceeded 125 mg/l;more » and total BTEX exceeded 3 mg/l. Removals of total n-alkanes, total petroleum hydrocarbons, and BTEX remained consistently high over 99%. During these tests, the energy costs averaged $0.20/bbl at 12 bbl/D.« less

  10. Exchangeability in the case-crossover design

    PubMed Central

    Mittleman, Murray A; Mostofsky, Elizabeth

    2014-01-01

    In cohort and case-control studies, confounding that arises as a result of differences in the distribution of determinants of the outcome between exposure groups leading to non-exchangeability are addressed by restriction, matching or with statistical models. In case-only studies, this issue is addressed by comparing each individual with his/herself. Although case-only designs use self-matching and only include individuals who develop the outcome of interest, issues of non-exchangeability are identical to those that arise in traditional case-control and cohort studies. In this review, we describe one type of case-only design, the case-crossover design, and discuss how the concept of exchangeability can be used to understand issues of confounding, carryover effects, period effects and selection bias in case-crossover studies. PMID:24756878

  11. A Case Study of Educational Computer Game Design by Middle School Students

    ERIC Educational Resources Information Center

    An, Yun-Jo

    2016-01-01

    Only a limited number of research studies have investigated how students design educational computer games and its impact on student learning. In addition, most studies on educational game design by students were conducted in the areas of mathematics and science. Using the qualitative case study approach, this study explored how seventh graders…

  12. Case study: Lockheed-Georgia Company integrated design process

    NASA Technical Reports Server (NTRS)

    Waldrop, C. T.

    1980-01-01

    A case study of the development of an Integrated Design Process is presented. The approach taken in preparing for the development of an integrated design process includes some of the IPAD approaches such as developing a Design Process Model, cataloging Technical Program Elements (TPE's), and examining data characteristics and interfaces between contiguous TPE's. The implementation plan is based on an incremental development of capabilities over a period of time with each step directed toward, and consistent with, the final architecture of a total integrated system. Because of time schedules and different computer hardware, this system will not be the same as the final IPAD release; however, many IPAD concepts will no doubt prove applicable as the best approach. Full advantage will be taken of the IPAD development experience. A scenario that could be typical for many companies, even outside the aerospace industry, in developing an integrated design process for an IPAD-type environment is represented.

  13. Bioremediation and reclamation of soil contaminated with petroleum oil hydrocarbons by exogenously seeded bacterial consortium: a pilot-scale study.

    PubMed

    Mukherjee, Ashis K; Bordoloi, Naba K

    2011-03-01

    Spillage of petroleum hydrocarbons causes significant environmental pollution. Bioremediation is an effective process to remediate petroleum oil contaminant from the ecosystem. The aim of the present study was to reclaim a petroleum oil-contaminated soil which was unsuitable for the cultivation of crop plants by using petroleum oil hydrocarbon-degrading microbial consortium. Bacterial consortium consisting of Bacillus subtilis DM-04 and Pseudomonas aeruginosa M and NM strains were seeded to 20% (v/w) petroleum oil-contaminated soil, and bioremediation experiment was carried out for 180 days under laboratory condition. The kinetics of hydrocarbon degradation was analyzed using biochemical and gas chromatographic (GC) techniques. The ecotoxicity of the elutriates obtained from petroleum oil-contaminated soil before and post-treatment with microbial consortium was tested on germination and growth of Bengal gram (Cicer aretinum) and green gram (Phaseolus mungo) seeds. Bacterial consortium showed a significant reduction in total petroleum hydrocarbon level in contaminated soil (76% degradation) as compared to the control soil (3.6% degradation) 180 days post-inoculation. The GC analysis confirmed that bacterial consortium was more effective in degrading the alkane fraction compared to aromatic fraction of crude petroleum oil hydrocarbons in soil. The nitrogen, sulfur, and oxygen compounds fraction was least degraded. The reclaimed soil supported the germination and growth of crop plants (C. aretinum and P. mungo). In contrast, seeds could not be germinated in petroleum oil-contaminated soil. The present study reinforces the application of bacterial consortium rather than individual bacterium for the effective bioremediation and reclamation of soil contaminated with petroleum oil.

  14. Petroleum marketing monthly, June 1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products aremore » presented in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. The feature article is entitled ``The Second Oxygenated Gasoline Season.`` 7 figs., 50 tabs.« less

  15. Using system dynamics for collaborative design: a case study

    PubMed Central

    Elf, Marie; Putilova, Mariya; von Koch, Lena; Öhrn, Kerstin

    2007-01-01

    Background In order to facilitate the collaborative design, system dynamics (SD) with a group modelling approach was used in the early stages of planning a new stroke unit. During six workshops a SD model was created in a multiprofessional group. Aim To explore to which extent and how the use of system dynamics contributed to the collaborative design process. Method A case study was conducted using several data sources. Results SD supported a collaborative design, by facilitating an explicit description of stroke care process, a dialogue and a joint understanding. The construction of the model obliged the group to conceptualise the stroke care and experimentation with the model gave the opportunity to reflect on care. Conclusion SD facilitated the collaborative design process and should be integrated in the early stages of the design process as a quality improvement tool. PMID:17683519

  16. Petroleum and Health Care: Evaluating and Managing Health Care's Vulnerability to Petroleum Supply Shifts

    PubMed Central

    Bednarz, Daniel; Bae, Jaeyong; Pierce, Jessica

    2011-01-01

    Petroleum is used widely in health care—primarily as a transport fuel and feedstock for pharmaceuticals, plastics, and medical supplies—and few substitutes for it are available. This dependence theoretically makes health care vulnerable to petroleum supply shifts, but this vulnerability has not been empirically assessed. We quantify key aspects of petroleum use in health care and explore historical associations between petroleum supply shocks and health care prices. These analyses confirm that petroleum products are intrinsic to modern health care and that petroleum supply shifts can affect health care prices. In anticipation of future supply contractions lasting longer than previous shifts and potentially disrupting health care delivery, we propose an adaptive management approach and outline its application to the example of emergency medical services. PMID:21778473

  17. Public Health and Medicine in an Age of Energy Scarcity: The Case of Petroleum

    PubMed Central

    Parker, Cindy L.; Hess, Jeremy; Frumkin, Howard

    2011-01-01

    Petroleum supplies have heretofore been abundant and inexpensive, but the world petroleum production peak is imminent, and we are entering an unprecedented era of petroleum scarcity. This fact has had little impact on policies related to climate, energy, the built environment, transportation, food, health care, public health, and global health. Rising prices are likely to spur research and drive efficiency improvements, but such innovations may be unable to address an increasing gap between supply and demand. The resulting implications for health and the environment are explored in the articles we have selected as additional contributions in this special issue. Uncertainty about the timing of the peak, the shape of the production curve, and decline rates should not delay action. The time for quick, decisive, comprehensive action is now. PMID:21778506

  18. Scenario for concurrent conceptual assembly line design: A case study

    NASA Astrophysics Data System (ADS)

    Mas, F.; Ríos, J.; Menéndez, J. L.

    2012-04-01

    The decision to design and build a new aircraft is preceded by years of research and study. Different disciplines work together throughout the lifecycle to ensure not only a complete functional definition of the product, but also a complete industrialization, a marketing plan, a maintenance plan, etc. This case study focuses on the conceptual design phase. During this phase, the design solutions that will meet the functional and industrial requirements are defined, i.e.: the basic requirements of industrialization. During this phase, several alternatives are studied, and the most attractive in terms of performance and cost requirements is selected. As a result of the study of these alternatives, it is possible to define an early conceptual design of the assembly line and its basic parameters. The plant needs, long cycle jigs & tools or industrial means and human resources with the necessary skills can be determined in advance.

  19. A case study on topology optimized design for additive manufacturing

    NASA Astrophysics Data System (ADS)

    Gebisa, A. W.; Lemu, H. G.

    2017-12-01

    Topology optimization is an optimization method that employs mathematical tools to optimize material distribution in a part to be designed. Earlier developments of topology optimization considered conventional manufacturing techniques that have limitations in producing complex geometries. This has hindered the topology optimization efforts not to fully be realized. With the emergence of additive manufacturing (AM) technologies, the technology that builds a part layer upon a layer directly from three dimensional (3D) model data of the part, however, producing complex shape geometry is no longer an issue. Realization of topology optimization through AM provides full design freedom for the design engineers. The article focuses on topologically optimized design approach for additive manufacturing with a case study on lightweight design of jet engine bracket. The study result shows that topology optimization is a powerful design technique to reduce the weight of a product while maintaining the design requirements if additive manufacturing is considered.

  20. Petroleum marketing monthly, May 1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1994-05-26

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published datamore » in the Petroleum Marketing Monthly.« less

  1. Evaluation of Empirical Data and Modeling Studies to Support Soil Vapor Intrusion Screening Criteria for Petroleum Hydrocarbon Compounds

    EPA Science Inventory

    This study is an evaluation of empirical data and select modeling studies of the behavior of petroleum hydrocarbon (PHC) vapors in subsurface soils and how they can affect subsurface-to-indoor air vapor intrusion (VI), henceforth referred to as petroleum vapor intrusion or “PVI” ...

  2. 31 CFR 576.206 - Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum Products, and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Fund for Iraq, Iraqi Petroleum and Petroleum Products, and the Central Bank of Iraq. 576.206 Section... Prohibitions § 576.206 Protection granted to the Development Fund for Iraq, Iraqi Petroleum and Petroleum... petroleum and petroleum products, and interests therein, but only until title passes to the initial...

  3. Study designs may influence results: the problems with questionnaire-based case-control studies on the epidemiology of glioma.

    PubMed

    Johansen, Christoffer; Schüz, Joachim; Andreasen, Anne-Marie Serena; Dalton, Susanne Oksbjerg

    2017-03-28

    Glioma is a rare brain tumour with a very poor prognosis and the search for modifiable factors is intense. We reviewed the literature concerning risk factors for glioma obtained in case-control designed epidemiological studies in order to discuss the influence of this methodology on the observed results. When reviewing the association between three exposures, medical radiation, exogenous hormone use and allergy, we critically appraised the evidence from both case-control and cohort studies. For medical radiation and hormone replacement therapy (HRT), questionnaire-based case-control studies appeared to show an inverse association, whereas nested case-control and cohort studies showed no association. For allergies, the inverse association was observed irrespective of study design. We recommend that the questionnaire-based case-control design be placed lower in the hierarchy of studies for establishing cause-and-effect for diseases such as glioma. We suggest that a state-of-the-art case-control study should, as a minimum, be accompanied by extensive validation of the exposure assessment methods and the representativeness of the study sample with regard to the exposures of interest. Otherwise, such studies cannot be regarded as 'hypothesis testing' but only 'hypothesis generating'. We consider that this holds true for all questionnaire-based case-control studies on cancer and other chronic diseases, although perhaps not to the same extent for each exposure-outcome combination.

  4. Petroleum marketing monthly, September 1994

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum product sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensuresmore » the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.« less

  5. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    ERIC Educational Resources Information Center

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

  6. Identification of the human factors contributing to maintenance failures in a petroleum operation.

    PubMed

    Antonovsky, Ari; Pollock, Clare; Straker, Leon

    2014-03-01

    This research aimed to identify the most frequently occurring human factors contributing to maintenance-related failures within a petroleum industry organization. Commonality between failures will assist in understanding reliability in maintenance processes, thereby preventing accidents in high-hazard domains. Methods exist for understanding the human factors contributing to accidents. Their application in a maintenance context mainly has been advanced in aviation and nuclear power. Maintenance in the petroleum industry provides a different context for investigating the role that human factors play in influencing outcomes. It is therefore worth investigating the contributing human factors to improve our understanding of both human factors in reliability and the factors specific to this domain. Detailed analyses were conducted of maintenance-related failures (N = 38) in a petroleum company using structured interviews with maintenance technicians. The interview structure was based on the Human Factor Investigation Tool (HFIT), which in turn was based on Rasmussen's model of human malfunction. A mean of 9.5 factors per incident was identified across the cases investigated.The three most frequent human factors contributing to the maintenance failures were found to be assumption (79% of cases), design and maintenance (71%), and communication (66%). HFIT proved to be a useful instrument for identifying the pattern of human factors that recurred most frequently in maintenance-related failures. The high frequency of failures attributed to assumptions and communication demonstrated the importance of problem-solving abilities and organizational communication in a domain where maintenance personnel have a high degree of autonomy and a wide geographical distribution.

  7. Fostering Integrated Learning and Faculty Collaboration through Curriculum Design: A Case Study

    ERIC Educational Resources Information Center

    Routhieaux, Robert L.

    2015-01-01

    Designing and implementing innovative curricula can enhance student learning while simultaneously fostering faculty collaboration. However, innovative curricula can also surface numerous challenges for faculty, staff, students, and administration. This case study documents the design and implementation of an innovative Master of Business…

  8. The performance of ammonium exchanged zeolite for the biodegradation of petroleum hydrocarbons migrating in soil water.

    PubMed

    Freidman, Benjamin L; Gras, Sally L; Snape, Ian; Stevens, Geoff W; Mumford, Kathryn A

    2016-08-05

    Nitrogen deficiency has been identified as the main inhibiting factor for biodegradation of petroleum hydrocarbons in low nutrient environments. This study examines the performance of ammonium exchanged zeolite to enhance biodegradation of petroleum hydrocarbons migrating in soil water within laboratory scale flow cells. Biofilm formation and biodegradation were accelerated by the exchange of cations in soil water with ammonium in the pores of the exchanged zeolite when compared with natural zeolite flow cells. These results have implications for sequenced permeable reactive barrier design and the longevity of media performance within such barriers at petroleum hydrocarbon contaminated sites deficient in essential soil nutrients. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Petroleum: An Energy Profile 1999

    EIA Publications

    1999-01-01

    Explains in layman's terms the major components and operations of the U.S. petroleum industry that include: petroleum products, resources and reserves, drilling and exploration, refining, storage and transportation, imports, exports, and petroleum marketing.

  10. Microbial dynamics in petroleum oilfields and their relationship with physiological properties of petroleum oil reservoirs.

    PubMed

    Varjani, Sunita J; Gnansounou, Edgard

    2017-12-01

    Petroleum is produced by thermal decay of buried organic material over millions of years. Petroleum oilfield ecosystems represent resource of reduced carbon which favours microbial growth. Therefore, it is obvious that many microorganisms have adapted to harsh environmental conditions of these ecosystems specifically temperature, oxygen availability and pressure. Knowledge of microorganisms present in ecosystems of petroleum oil reservoirs; their physiological and biological properties help in successful exploration of petroleum. Understanding microbiology of petroleum oilfield(s) can be used to enhance oil recovery, as microorganisms in oil reservoirs produce various metabolites viz. gases, acids, solvents, biopolymers and biosurfactants. The aim of this review is to discuss characteristics of petroleum oil reservoirs. This review also provides an updated literature on microbial ecology of these extreme ecosystems including microbial origin as well as various types of microorganisms such as methanogens; iron, nitrate and sulphate reducing bacteria, and fermentative microbes present in petroleum oilfield ecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Metrics for Automotive Merchandising, Petroleum Marketing.

    ERIC Educational Resources Information Center

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of students in automotive merchandising and petroleum marketing classes, this instructional package is one of five for the marketing and distribution cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know…

  12. What Works Clearinghouse Study Review Guide Instructions for Reviewing Single-Case Designs Studies

    ERIC Educational Resources Information Center

    What Works Clearinghouse, 2016

    2016-01-01

    This document provides step-by-step instructions on how to complete the Study Review Guide (SRG, Version S3, V2) for single-case designs (SCDs). Reviewers will complete an SRG for every What Works Clearinghouse (WWC) review. A completed SRG should be a reviewer's independent assessment of the study, relative to the criteria specified in the review…

  13. The case-control design in veterinary sciences: A survey.

    PubMed

    Cullen, Jonah N; Sargeant, Jan M; Makielski, Kelly M; O'Connor, Annette M

    2016-11-01

    The case-control study design is deceptively simple. However, many design considerations influence the estimated effect measure. An investigation of case-control studies in the human health literature suggested that some of these considerations are not described in reports of case-control studies. Our hypothesis was that the majority of veterinary studies labeled as case-controls would be incident density designs, and many would not interpret the effect measure obtained from those studies as the rate ratio rather than the odds ratio. Reference databases were searched for author-designated case-control studies. A survey of 100 randomly selected studies was conducted to examine the different design options described and estimated effect measures. Of the 100 author-identified case-control studies, 83 assessed an exposure-outcome association and, of those, only 54 (65.1%) sampled the study population based on an outcome and would thus be considered case-control designs. Twelve studies were incidence density designs but none used this terminology. Of the studies that reported an odds ratio as the effect measure, none reported on additional considerations that would have enabled a more interpretable result. This survey indicated many case-control-labeled studies were not case-control designs and among case-control studies, key design aspects were not often described. The absence of information about study design elements and underlying assumptions in case-control studies limits the ability to establish the effect measured by the study and the evidentiary value of the study might be underestimated. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. From Petroleum to Penicillin. The First Hundred Years of Modern Chemical Engineering: 1859-1959.

    ERIC Educational Resources Information Center

    Burnett, J. N.

    1986-01-01

    Presents a description of the course "From Petroleum to Penicillin" which examines chemical engineering and the chemical industry from a scientific, social and symbolic view. Explains the goals, organization, and requirements of the course. Lists case study and lecture topics. (ML)

  15. Do plants modulate biomass allocation in response to petroleum pollution?

    PubMed Central

    Nie, Ming; Yang, Qiang; Jiang, Li-Fen; Fang, Chang-Ming; Chen, Jia-Kuan; Li, Bo

    2010-01-01

    Biomass allocation is an important plant trait that responds plastically to environmental heterogeneities. However, the effects on this trait of pollutants owing to human activities remain largely unknown. In this study, we investigated the response of biomass allocation of Phragmites australis to petroleum pollution by a 13CO2 pulse-labelling technique. Our data show that plant biomass significantly decreased under petroleum pollution, but the root–shoot ratio for both plant biomass and 13C increased with increasing petroleum concentration, suggesting that plants could increase biomass allocation to roots in petroleum-polluted soil. Furthermore, assimilated 13C was found to be significantly higher in soil, microbial biomass and soil respiration after soils were polluted by petroleum. These results suggested that the carbon released from roots is rapidly turned over by soil microbes under petroleum pollution. This study found that plants can modulate biomass allocation in response to petroleum pollution. PMID:20484231

  16. Petroleum and individual polycyclic aromatic hydrocarbons

    USGS Publications Warehouse

    Albers, Peter H.; Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    1995-01-01

    Crude petroleum, refined-petroleum products, and individual polycyclic aromatic hydrocarbons (PAHs) contained within petroleum are found throughout the world. their presence has been detected in living and nonliving components of ecosystems. Petroleum can be an environmental hazard for wild animals and plants. Individual PAHs are also hazardous to wildlife, but they are most commonly associated with human illnesses. Because petroleum is a major environmental source of these PAHs, petroleum and PAHs are jointly presented in this chapter. Composition, sources, environmental fate, and toxic effects on all living components of aquatic and terrestrial environments are addessed.

  17. Petroleum 1996: Issues and Trends

    EIA Publications

    1997-01-01

    Examines historical trends and focuses on major petroleum issues and the events they represent. It analyzes different dimensions of the petroleum industry and related markets in terms of how they relate to the volatility in petroleum markets.

  18. Collaborative Design of World Wide Web Pages: A Case Study.

    ERIC Educational Resources Information Center

    Andrew, Paige G; Musser, Linda R.

    1997-01-01

    This case study of the collaborative design of an earth science World Wide Web page at Pennsylvania State University highlights the role of librarians. Discusses the original Web site and links, planning, the intended audience, and redesign and recommended changes; and considers the potential contributions of librarians. (LRW)

  19. Adopting National Vocational Qualifications in the Offshore Industry: A Case Study.

    ERIC Educational Resources Information Center

    Fuller, Alison; John, Debbie

    1994-01-01

    From a case study of the introduction of National Vocational Qualifications (NVQs) in the British petroleum industry emerged three key issues: (1) their credibility depends on how closely they reflect employment standards; (2) context is important; and (3) although NVQs should provide wider access to opportunities, the offshore industry's…

  20. Designing for Diverse Learning: Case Study of Place-Based Learning in Design and Technologies Pre-Service Teacher Education

    ERIC Educational Resources Information Center

    Best, Marnie; MacGregor, Denise; Price, Deborah

    2017-01-01

    Place-based learning experiences in Design and Technologies education connect people and place with design processes and products. Drawing on place-based learning, this case study shares the experiences of eight final year pre-service Design and Technologies education students from the University of South Australia as they collaborated with…

  1. Microbial degradation of petroleum hydrocarbons.

    PubMed

    Varjani, Sunita J

    2017-01-01

    Petroleum hydrocarbon pollutants are recalcitrant compounds and are classified as priority pollutants. Cleaning up of these pollutants from environment is a real world problem. Bioremediation has become a major method employed in restoration of petroleum hydrocarbon polluted environments that makes use of natural microbial biodegradation activity. Petroleum hydrocarbons utilizing microorganisms are ubiquitously distributed in environment. They naturally biodegrade pollutants and thereby remove them from the environment. Removal of petroleum hydrocarbon pollutants from environment by applying oleophilic microorganisms (individual isolate/consortium of microorganisms) is ecofriendly and economic. Microbial biodegradation of petroleum hydrocarbon pollutants employs the enzyme catalytic activities of microorganisms to enhance the rate of pollutants degradation. This article provides an overview about bioremediation for petroleum hydrocarbon pollutants. It also includes explanation about hydrocarbon metabolism in microorganisms with a special focus on new insights obtained during past couple of years. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. The Design of Effective Case Study-Related Learning Strategies Training.

    ERIC Educational Resources Information Center

    Nuttall, Alice E.

    The development of case study training materials for an experimental research strategy is described, and the effects of such training are discussed. The theoretical foundation for learning strategies training was a social-cognitive/expectancy value model of college learning and teaching. In a posttest-only 2-group design, 54 students in an…

  3. Fundamentals of Petroleum.

    ERIC Educational Resources Information Center

    Bureau of Naval Personnel, Washington, DC.

    Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

  4. [The Munich Attachment and Effectiveness Study: Study Design and a Case Example].

    PubMed

    Hörz-Sagstetter, Susanne; Minow, Anna-Rahel; Erhardt, Ingrid; Barten-Hohn, Julia; Denscherz, Claudia; Buchheim, Anna; Taubner, Svenja; Mertens, Wolfgang

    2016-03-01

    The "Munich Attachment and Effectiveness Study" is a prospective psychotherapy study examining process and outcome of psychoanalytic psychotherapies. The study design and results are exemplified in a single case. At 6 points in time audio-taped and transcribed therapy sessions are evaluated using process instruments (e. g. Psychotherapy Process Q-Set PQS) and interviews (e. g. Operationalized Psychodynamic Diagnostics OPD, Heidelberg Structural Change Scale HSCS, Adult Attachment Interview AAI). In the single case, findings from the psychotherapeutic process (e. g. "therapist is empathic" according to PQS) complement the achieved changes. 5 HSCS problem foci reached level of "restructuring", on the Reflective Functioning Scale a marked change of RF took place and the attachment classification changed over time. The instruments employed in this study corresponded well in assessing change processes in spite of differing theoretical background. © Georg Thieme Verlag KG Stuttgart · New York.

  5. On the Difficulties of Concurrent-System Design, Illustrated with a 2×2 Switch Case Study

    NASA Astrophysics Data System (ADS)

    Daylight, Edgar G.; Shukla, Sandeep K.

    While various specification languages for concurrent-system design exist today, it is often not clear which specification language is more suitable than another for a particular case study. To address this problem, we study four different specification languages for the same 2×2 Switch case study: TLA + , Bluespec, Statecharts, and the Algebra of Communicating Processes (ACP). By slightly altering the design intent of the Switch, we obtain more complicated behaviors of the Switch. For each design intent, we investigate how each specification, in each of the specification languages, captures the corresponding behavior. By using three different criteria, we judge each specification and specification language. For our case study, however, all four specification languages perform poorly in at least two criteria! Hence, this paper illustrates, on a seemingly simple case study, some of the prevailing difficulties of concurrent-system design.

  6. Distilling Design Patterns From Agile Curation Case Studies

    NASA Astrophysics Data System (ADS)

    Benedict, K. K.; Lenhardt, W. C.; Young, J. W.

    2016-12-01

    In previous work the authors have argued that there is a need to take a new look at the data management lifecycle. Our core argument is that the data management lifecycle needs to be in essence deconstructed and rebuilt. As part of this process we also argue that much can be gained from applying ideas, concepts, and principles from agile software development methods. To be sure we are not arguing for a rote application of these agile software approaches, however, given various trends related to data and technology, it is imperative to update our thinking about how to approach the data management lifecycle, recognize differing project scales, corresponding variations in structure, and alternative models for solving the problems of scientific data curation. In this paper we will describe what we term agile curation design patterns, borrowing the concept of design patterns from the software world and we will present some initial thoughts on agile curation design patterns as informed by a sample of data curation case studies solicited from participants in agile data curation meeting sessions conducted in 2015-16.

  7. Chemical Principles Revisited: Petroleum Chemistry.

    ERIC Educational Resources Information Center

    Kolb, Doris; Kolb, Kenneth E.

    1979-01-01

    Presents an historical review of the role of petroleum in world history and information on the chemistry of petroleum. It is suggested that petroleum chemistry be discussed since within the next two decades oil and gas will provide the major portion of U.S. energy. (Author/SA)

  8. Phytoremediation of petroleum-polluted soils: application of Polygonum aviculare and its root-associated (penetrated) fungal strains for bioremediation of petroleum-polluted soils.

    PubMed

    Mohsenzadeh, Fariba; Nasseri, Simin; Mesdaghinia, Alireza; Nabizadeh, Ramin; Zafari, Doustmorad; Khodakaramian, Gholam; Chehregani, Abdolkarim

    2010-05-01

    Petroleum-polluted soils are a common disaster in many countries. Bioremediation of oil contamination in soils is based on the stimulation of petroleum-hydrocarbon-degrading fungal and microbial communities. A field study was conducted in a petroleum-contaminated site to find petroleum-resistant plants and their root-associated fungal strains for use in bioremediation of petroleum-polluted soils. Results and observations showed that the amounts of petroleum pollution in nonvegetated soils were several times higher than in vegetated soils. Plants collected from petroleum-polluted areas were identified using morphological characters. Results indicated that seven plant species were growing on the contaminated sites: Alhaji cameleron L. (Fabaceae), Amaranthus retroflexus L. var. retroflexus (Amaranthaceae), Convolvulus arvensis L. (Convolvulaceae), Chrozophora hierosolymitana Spreg. (Euphorbiaceae), Noea mucronata L. (Boraginaceae), Poa sp. (Poaceae), and Polygonum aviculare L. (Polygonaceae). The root-associated fungi of each plant were determined and results showed the presence of 11 species that associated with and also penetrated the roots of plants growing in the polluted areas. Altenaria sp. was common to all of the plants and the others had species-specific distribution within the plants. The largest numbers of fungal species (six) were determined for P. aviculare and Poa sp. in polluted areas. However, the variation of fungal strains in the plants collected from petroleum-polluted areas was greater than for nonpolluted ones. Culture of fungi in oil-contaminated media showed that all the studied fungi were resistant to low petroleum pollution (1% v/v) and a few species, especially Fusarium species, showed resistance to higher petroleum pollution (10% v/v) and may be suitable for bioremediation in highly polluted areas. Bioremediation tests with P. aviculare, with and without fungal strains, showed that application of both the plant and its root-associated fungal

  9. Sampling design considerations for demographic studies: a case of colonial seabirds

    USGS Publications Warehouse

    Kendall, William L.; Converse, Sarah J.; Doherty, Paul F.; Naughton, Maura B.; Anders, Angela; Hines, James E.; Flint, Elizabeth

    2009-01-01

    For the purposes of making many informed conservation decisions, the main goal for data collection is to assess population status and allow prediction of the consequences of candidate management actions. Reducing the bias and variance of estimates of population parameters reduces uncertainty in population status and projections, thereby reducing the overall uncertainty under which a population manager must make a decision. In capture-recapture studies, imperfect detection of individuals, unobservable life-history states, local movement outside study areas, and tag loss can cause bias or precision problems with estimates of population parameters. Furthermore, excessive disturbance to individuals during capture?recapture sampling may be of concern because disturbance may have demographic consequences. We address these problems using as an example a monitoring program for Black-footed Albatross (Phoebastria nigripes) and Laysan Albatross (Phoebastria immutabilis) nesting populations in the northwestern Hawaiian Islands. To mitigate these estimation problems, we describe a synergistic combination of sampling design and modeling approaches. Solutions include multiple capture periods per season and multistate, robust design statistical models, dead recoveries and incidental observations, telemetry and data loggers, buffer areas around study plots to neutralize the effect of local movements outside study plots, and double banding and statistical models that account for band loss. We also present a variation on the robust capture?recapture design and a corresponding statistical model that minimizes disturbance to individuals. For the albatross case study, this less invasive robust design was more time efficient and, when used in combination with a traditional robust design, reduced the standard error of detection probability by 14% with only two hours of additional effort in the field. These field techniques and associated modeling approaches are applicable to studies of

  10. Complexity in Design-Driven Innovation: A Case Study of Knowledge Transfer Flow in Subsea Seismic Sensor Technology and Design Education

    ERIC Educational Resources Information Center

    Pavel, Nenad; Berg, Arild

    2015-01-01

    To the extent previously claimed, concept exploration is not the key to product innovation. However, companies that are design-focused are twice as innovative as those that are not. To study design-driven innovation and its occurrence in design education, two case studies are conducted. The first is an example of design practice which includes…

  11. Hydrocarbon Degradation in Caspian Sea Sediment Cores Subjected to Simulated Petroleum Seepage in a Newly Designed Sediment-Oil-Flow-Through System.

    PubMed

    Mishra, Sonakshi; Wefers, Peggy; Schmidt, Mark; Knittel, Katrin; Krüger, Martin; Stagars, Marion H; Treude, Tina

    2017-01-01

    The microbial community response to petroleum seepage was investigated in a whole round sediment core (16 cm length) collected nearby natural hydrocarbon seepage structures in the Caspian Sea, using a newly developed Sediment-Oil-Flow-Through (SOFT) system. Distinct redox zones established and migrated vertically in the core during the 190 days-long simulated petroleum seepage. Methanogenic petroleum degradation was indicated by an increase in methane concentration from 8 μM in an untreated core compared to 2300 μM in the lower sulfate-free zone of the SOFT core at the end of the experiment, accompanied by a respective decrease in the δ 13 C signal of methane from -33.7 to -49.5‰. The involvement of methanogens in petroleum degradation was further confirmed by methane production in enrichment cultures from SOFT sediment after the addition of hexadecane, methylnapthalene, toluene, and ethylbenzene. Petroleum degradation coupled to sulfate reduction was indicated by the increase of integrated sulfate reduction rates from 2.8 SO 4 2- m -2 day -1 in untreated cores to 5.7 mmol SO 4 2- m -2 day -1 in the SOFT core at the end of the experiment, accompanied by a respective accumulation of sulfide from 30 to 447 μM. Volatile hydrocarbons (C2-C6 n -alkanes) passed through the methanogenic zone mostly unchanged and were depleted within the sulfate-reducing zone. The amount of heavier n -alkanes (C10-C38) decreased step-wise toward the top of the sediment core and a preferential degradation of shorter (C30) was seen during the seepage. This study illustrates, to the best of our knowledge, for the first time the development of methanogenic petroleum degradation and the succession of benthic microbial processes during petroleum passage in a whole round sediment core.

  12. Hydrocarbon Degradation in Caspian Sea Sediment Cores Subjected to Simulated Petroleum Seepage in a Newly Designed Sediment-Oil-Flow-Through System

    PubMed Central

    Mishra, Sonakshi; Wefers, Peggy; Schmidt, Mark; Knittel, Katrin; Krüger, Martin; Stagars, Marion H.; Treude, Tina

    2017-01-01

    The microbial community response to petroleum seepage was investigated in a whole round sediment core (16 cm length) collected nearby natural hydrocarbon seepage structures in the Caspian Sea, using a newly developed Sediment-Oil-Flow-Through (SOFT) system. Distinct redox zones established and migrated vertically in the core during the 190 days-long simulated petroleum seepage. Methanogenic petroleum degradation was indicated by an increase in methane concentration from 8 μM in an untreated core compared to 2300 μM in the lower sulfate-free zone of the SOFT core at the end of the experiment, accompanied by a respective decrease in the δ13C signal of methane from -33.7 to -49.5‰. The involvement of methanogens in petroleum degradation was further confirmed by methane production in enrichment cultures from SOFT sediment after the addition of hexadecane, methylnapthalene, toluene, and ethylbenzene. Petroleum degradation coupled to sulfate reduction was indicated by the increase of integrated sulfate reduction rates from 2.8 SO42-m-2 day-1 in untreated cores to 5.7 mmol SO42-m-2 day-1 in the SOFT core at the end of the experiment, accompanied by a respective accumulation of sulfide from 30 to 447 μM. Volatile hydrocarbons (C2–C6 n-alkanes) passed through the methanogenic zone mostly unchanged and were depleted within the sulfate-reducing zone. The amount of heavier n-alkanes (C10–C38) decreased step-wise toward the top of the sediment core and a preferential degradation of shorter (C30) was seen during the seepage. This study illustrates, to the best of our knowledge, for the first time the development of methanogenic petroleum degradation and the succession of benthic microbial processes during petroleum passage in a whole round sediment core. PMID:28503172

  13. Updated estimation of energy efficiencies of U.S. petroleum refineries.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Palou-Rivera, I.; Wang, M. Q.

    2010-12-08

    Evaluation of life-cycle (or well-to-wheels, WTW) energy and emission impacts of vehicle/fuel systems requires energy use (or energy efficiencies) of energy processing or conversion activities. In most such studies, petroleum fuels are included. Thus, determination of energy efficiencies of petroleum refineries becomes a necessary step for life-cycle analyses of vehicle/fuel systems. Petroleum refinery energy efficiencies can then be used to determine the total amount of process energy use for refinery operation. Furthermore, since refineries produce multiple products, allocation of energy use and emissions associated with petroleum refineries to various petroleum products is needed for WTW analysis of individual fuels suchmore » as gasoline and diesel. In particular, GREET, the life-cycle model developed at Argonne National Laboratory with DOE sponsorship, compares energy use and emissions of various transportation fuels including gasoline and diesel. Energy use in petroleum refineries is key components of well-to-pump (WTP) energy use and emissions of gasoline and diesel. In GREET, petroleum refinery overall energy efficiencies are used to determine petroleum product specific energy efficiencies. Argonne has developed petroleum refining efficiencies from LP simulations of petroleum refineries and EIA survey data of petroleum refineries up to 2006 (see Wang, 2008). This memo documents Argonne's most recent update of petroleum refining efficiencies.« less

  14. Petroleum Sector (NAICS 324)

    EPA Pesticide Factsheets

    Find relevant environmental regulations for the petroleum industry (NAICS 324), including National Emission Standards for Hazardous Air Pollutants (NESHAP)s for petroleum refineries and gasoline dispensing & effluent guidelines for oil and gas extraction

  15. Study design options in evaluating gene-environment interactions: practical considerations for a planned case-control study of pediatric leukemia.

    PubMed

    Goodman, Michael; Dana Flanders, W

    2007-04-01

    We compare methodological approaches for evaluating gene-environment interaction using a planned study of pediatric leukemia as a practical example. We considered three design options: a full case-control study (Option I), a case-only study (Option II), and a partial case-control study (Option III), in which information on controls is limited to environmental exposure only. For each design option we determined its ability to measure the main effects of environmental factor E and genetic factor G, and the interaction between E and G. Using the leukemia study example, we calculated sample sizes required to detect and odds ratio (OR) of 2.0 for E alone, an OR of 10 for G alone and an interaction G x E of 3. Option I allows measuring both main effects and interaction, but requires a total sample size of 1,500 cases and 1,500 controls. Option II allows measuring only interaction, but requires just 121 cases. Option III allows calculating the main effect of E, and interaction, but not the main effect of G, and requires a total of 156 cases and 133 controls. In this case, the partial case-control study (Option III) appears to be more efficient with respect to its ability to answer the research questions for the amount of resources required. The design options considered in this example are not limited to observational epidemiology and may be applicable in studies of pharmacogenomics, survivorship, and other areas of pediatric ALL research.

  16. Assessment of petroleum streams for thyroid toxicity.

    PubMed

    Fowles, Jeff R; Banton, Marcy I; Boogaard, Peter J; Ketelslegers, Hans B; Rohde, Arlean M

    2016-07-08

    The thyroid gland, and its associated endocrine hormones, is a growing area of interest in regulatory toxicology due to its important role in metabolism, growth and development. This report presents a review of the toxicology data on chemically complex petroleum streams for thyroid hormone effects. Toxicological summaries and studies from all available published and un-published sources were considered, drawing upon the European REACH regulatory submissions for 19 petroleum streams, with in depth review of 11 individual study reports and 31 published papers on related products or environmental settings. Findings relevant to thyroid pathology or thyroid hormone homeostasis were specifically sought, summarized, and discussed. A total of 349 studies of 28-days or longer duration were considered in the review, including data on mice, rats, rabbits, dogs, humans, and fish. The thyroid was almost invariably not a target organ in these studies. Three rodent studies did find thyroid effects; one on a jet fuel product (JP-8), and two studies on a heavy fuel oil product (F-179). The JP-8 product differs from other fuels due to the presence of additives, and the finding of reduced T4 levels in mice in the study occurred at a dose that is above that expected to occur in environmental settings (e.g. 2000mg/kg). The finding for F-179 involved thyroid inflammation at 10-55mg/kg that co-occurred with liver pathology in rats, indicating a possible secondary effect with questionable relevance to humans. In the few cases where findings did occur, the polycyclic aromatic hydrocarbon (PAH) content was higher than in related substances, and, in support of one possible adverse outcome pathway, one in-vitro study reported reduced thyroid peroxidase (TPO) activity with exposure to some PAH compounds (pyrene, benzo(k)fluoranthene, and benzo(e)pyrene). However, it could not be determined from the data available for this review, whether these specific PAH compounds were substantially higher

  17. The common case study: Lockheed design of a supersonic cruise vehicle

    NASA Technical Reports Server (NTRS)

    Clauss, J. S., Jr.; Hays, A. P.; Wilson, J. R.

    1978-01-01

    The objective was to compare the characteristics of SSTs designed for the same mission by Lockheed, McDonnell Douglas, British Aerospace (U.K.), Aerospatiale (France), and the USSR. This comparison was to be used to calibrate parametric design studies of the tradeoff between SST direct operating cost (DOC) and noise levels at the FAR 36 certification points. The guidelines for this common case study were to design an aircraft with the following mission: payload 23 247 kg (51 250 lbm), range - 7000 km (3780 n. mi.), and cruise Mach number - 2.2. Field length was constrained to 3505 m (11 500 ft). Other airfield constraints and fuel reserves were also specified, but no noise constraints were applied.

  18. 1986 Petroleum Software Directory. [800 mini, micro and mainframe computer software packages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1985-01-01

    Pennwell's 1986 Petroleum Software Directory is a complete listing of software created specifically for the petroleum industry. Details are provided on over 800 mini, micro and mainframe computer software packages from more than 250 different companies. An accountant can locate programs to automate bookkeeping functions in large oil and gas production firms. A pipeline engineer will find programs designed to calculate line flow and wellbore pressure drop.

  19. Biosurfactant-producing strains in enhancing solubilization and biodegradation of petroleum hydrocarbons in groundwater.

    PubMed

    Liu, Hong; Wang, Hang; Chen, Xuehua; Liu, Na; Bao, Suriguge

    2014-07-01

    Three biosurfactant-producing strains designated as BS-1, BS-3, and BS-4 were screened out from crude oil-contaminated soil using a combination of surface tension measurement and oil spreading method. Thin layer chromatography and infrared analysis indicated that the biosurfactants produced by the three strains were lipopeptide, glycolipid, and phospholipid. The enhancement of solubilization and biodegradation of petroleum hydrocarbons in groundwater employing biosurfactant-producing strains was investigated. The three strain mixtures led to more solubilization of petroleum hydrocarbons in groundwater, and the solubilization rate was 10.5 mg l−1. The combination of biosurfactant-producing strains and petroleum-degrading strains exhibited a higher biodegradation efficiency of 85.4 % than the petroleum-degrading strains (71.2 %). Biodegradation was enhanced the greatest with biosurfactant-producing strains and petroleum-degrading strains in a ratio of 1:1. Fluorescence microscopy images illustrate that the oil dispersed into smaller droplets and emulsified in the presence of biosurfactant-producing strains, which attached to the oil. Thus, the biodegradation of petroleum hydrocarbons in groundwater was enhanced.

  20. Design and Construction Process of Two LEED Certified University Buildings: A Collective Case Study

    ERIC Educational Resources Information Center

    Rich, Kim

    2011-01-01

    This study was conducted at the early stages of integrating LEED into the design process in which a clearer understanding of what sustainable and ecological design was about became evident through the duration of designing and building of two academic buildings on a university campus. In this case study, due to utilizing a grounded theory…

  1. Arbuscular mycorrhizal fungi in chronically petroleum-contaminated soils in Mexico and the effects of petroleum hydrocarbons on spore germination.

    PubMed

    Franco-Ramírez, Alicia; Ferrera-Cerrato, Ronald; Varela-Fregoso, Lucía; Pérez-Moreno, Jesús; Alarcón, Alejandro

    2007-10-01

    Arbuscular mycorrhizal fungi (AMF) have been hypothesized to enhance plant adaptation and growth in petroleum-contaminated soils. Nevertheless, neither AMF-biodiversity under chronically petroleum-contaminated soils nor spore germination response to petroleum hydrocarbons has been well studied. Chronically petroleum-contaminated rhizosphere soil and roots from Echinochloa polystachya, Citrus aurantifolia and C. aurantium were collected from Activo Cinco Presidentes, Tabasco, Mexico. Root colonization and spore abundance were evaluated. Additionally, rhizosphere soil samples were propagated using Sorghum vulgare L. as a plant trap under greenhouse conditions; subsequently, AMF-spores were identified. AMF-colonization ranged from 63 to 77% while spore number ranged from 715 to 912 in 100 g soil, suggesting that AMF tolerate the presence of petroleum hydrocarbons in the rhizosphere. From grass species, four AMF-morphospecies were identified: Glomus ambisporum, G. sinuosum (previously described as Sclerocystis sinuosum), Acaulospora laevis, and Ambispora gerdermanni. From citrus trees, four AMF-species were also identified: Scutellospora heterogama, G. ambisporum, Acaulospora scrobiculata, and G. citricola. In a second study, it was observed that spore germination and hyphal length of G. mosseae, G. ambisporum, and S. heterogama were significantly reduced by either volatile compounds of crude oil or increased concentrations of benzo[a ]pyrene or phenanthrene in water-agar.

  2. Prevalence and occupational predictors of psychological distress in the offshore petroleum industry: a prospective study.

    PubMed

    Nielsen, Morten Birkeland; Tvedt, Sturle Danielsen; Matthiesen, Stig Berge

    2013-11-01

    This study investigates the prevalence of psychological distress and stressors in the work environment as prospective predictors of distress, among employees in the offshore petroleum industry. Correlation and logistic regression analyses were employed to examine longitudinal relationships between stressors and distress in a randomly drawn sample of 741 employees from the Norwegian petroleum offshore industry. Time lag between baseline and follow-up was 6 months. Work environment stressors included safety factors, leadership, and job characteristics. The prevalence of psychological distress was 9 % at baseline and 8 % at follow-up. All investigated work environment factors correlated with subsequent distress. In bivariate logistic regression analyses, caseness of distress was predicted by baseline distress, near miss accidents, risk perception, poor safety climate, tyrannical leadership, laissez-faire leadership, job demands, and workplace bullying. After adjustment for baseline distress, control variables, and other predictors, laissez-faire leadership (OR = 1.69; 95 % CI: 1.12-2.54) and exposure to bullying (OR = 1.49; 95 % CI: 1.07-2.10) emerged as the most robust predictors of subsequent distress. The findings show that the prevalence of psychological distress is lower among offshore employees than in the general population. Although offshore workers operate in a physically challenging context, their mental health is mainly influenced by stressors in the psychosocial work environment. This highlights the importance of developing and implementing psychosocial safety interventions within the offshore industry.

  3. Quantification of construction waste prevented by BIM-based design validation: Case studies in South Korea.

    PubMed

    Won, Jongsung; Cheng, Jack C P; Lee, Ghang

    2016-03-01

    Waste generated in construction and demolition processes comprised around 50% of the solid waste in South Korea in 2013. Many cases show that design validation based on building information modeling (BIM) is an effective means to reduce the amount of construction waste since construction waste is mainly generated due to improper design and unexpected changes in the design and construction phases. However, the amount of construction waste that could be avoided by adopting BIM-based design validation has been unknown. This paper aims to estimate the amount of construction waste prevented by a BIM-based design validation process based on the amount of construction waste that might be generated due to design errors. Two project cases in South Korea were studied in this paper, with 381 and 136 design errors detected, respectively during the BIM-based design validation. Each design error was categorized according to its cause and the likelihood of detection before construction. The case studies show that BIM-based design validation could prevent 4.3-15.2% of construction waste that might have been generated without using BIM. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Environmental- and health-risk-induced remediation design for benzene-contaminated groundwater under parameter uncertainty: a case study in Western Canada.

    PubMed

    Fan, X; He, L; Lu, H W; Li, J

    2014-09-01

    This study proposes an environmental- and health-risk-induced remediation design approach for benzene-contaminated groundwater. It involves exposure frequency and intake rates that are important but difficult to be exactly quantified as breakthrough point. Flexible health-risk control is considered in the simulation and optimization work. The proposed approach is then applied to a petroleum-contaminated site in western Canada. Different situations about remediation durations, public concerns, and satisfactory degrees are addressed by the approach. The relationship between environmental standards and health-risk limits is analyzed, in association with their effect on remediation costs. Insights of three uncertain factors (i.e. exposure frequency, intake rate and health-risk threshold) for the remediation system are also explored, on a basis of understanding their impacts on health risk as well as their importance order. The case study results show that (1) nature attenuation plays a more important role in long-term remediation scheme than the pump-and-treat system; (2) carcinogenic risks have greater impact on total pumping rates than environmental standards for long-term remediation; (3) intake rates are the second important factor affecting the remediation system's performance, followed by exposure frequency; (4) the 10-year remediation scheme is the most robust choice when environmental and health-risk concerns are not well quantified. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Orbital compressed air and petroleum injury mimicking necrotizing fasciitis.

    PubMed

    Mellington, Faye E; Bacon, Annette S; Abu-Bakra, Mohammed A J; Martinez-Devesa, Pablo; Norris, Jonathan H

    2014-09-01

    Orbital injury secondary to petroleum-based products is rare. We report the first case, to our knowledge, of a combined compressed air and chemical orbital injury, which mimicked necrotizing fasciitis. A 58-year-old man was repairing his motorcycle engine when a piston inadvertently fired, discharging compressed air and petroleum-based carburetor cleaner into his left eye. He developed surgical emphysema, skin necrosis, and a chemical cellulitis, causing an orbital compartment syndrome. He was treated initially with antibiotics and subsequently with intravenous steroid and orbital decompression surgery. There was almost complete recovery by 4 weeks postsurgery. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Petroleum-based products can cause severe skin irritation and necrosis. Compressed air injury can cause surgical emphysema. When these two mechanisms of injury are combined, the resulting orbitopathy and skin necrosis can mimic necrotizing fasciitis and cause diagnostic confusion. A favorable outcome is achievable with aggressive timely management. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Petroleum geology and total petroleum systems of the Widyan Basin and Interior Platform of Saudi Arabia and Iraq

    USGS Publications Warehouse

    Fox, James E.; Ahlbrandt, Thomas S.

    2002-01-01

    The Widyan Basin-Interior Platform Province (2023) ranks 17th in the world, exclusive of the United States, with 62.5 billion barrels of oil equivalent of total petroleum endowment (cumulative production plus remaining petroleum plus estimated mean undiscovered volumes). Mean estimates of undiscovered petroleum for the province, which includes both Paleozoic and Jurassic petroleum systems as well as portions of three additional total petroleum systems from adjacent provinces, are 21.22 billion barrels of oil, 94.75 trillion cubic feet of gas (15.8 billion barrels of oil equivalent), and 6.85 billion barrels of natural gas liquids. The Paleozoic total petroleum system is dominantly gas prone, whereas the volumetrically larger Jurassic total petroleum system is oil prone - resulting in the characterization of the province as an oil province. The discovery maturity for the province is a relatively low 31 percent, meaning that much of the province petroleum potential lies in the future.

  7. Characterization of Northern California petroleum by stable carbon isotopes

    USGS Publications Warehouse

    Lillis, Paul G.; Magoon, Leslie B.; Stanley, Richard G.; McLaughlin, Robert J.; Warden, Augusta

    2001-01-01

    The purpose of this study is to characterize natural occurrences of petroleum at the surface and in the subsurface within northern California in order to define and map petroleum systems for U.S. Geological Survey energy resource assessments. Furthermore, the chemical characterization and mapping of natural petroleum occurrences could also be used to discriminate natural occurrences from accidental oil spills during the activities of extraction or transportation of petroleum. Samples include petroleum from exploratory well tests, producing fields, natural seeps, and oil-stained rocks, and condensates from gas wells. Most of the sample localities are in northern California but a few samples from central and southern California are included for comparison (table 1). Even though other analyses were performed, only stable carbon isotope (δ13C) data are presented here for brevity and because δ13C values are one of the most discriminating characteristics of California petroleum.

  8. Development of Interspecies Correlation Models for Petroleum Hydrocarbons

    EPA Science Inventory

    Estimating the consequences of petroleum products to water column organisms has commonly been hampered by limited acute toxicity data, which exists only for a relatively small number of test species. In this study, we developed petroleum-specific Interspecies Correlation Estimati...

  9. Energy-efficient building design in cold climates: Schools as a case study

    NASA Astrophysics Data System (ADS)

    Rangel Ruiz, Rocio

    Buildings account for great amounts of greenhouse gas emissions. In terms of energy, buildings account for one third of the total amount of energy used in the country every year! Schools account for 14 percent of the energy used annually in commercial and institutional buildings. Further, schools are one of the most commonly constructed building types in Canada and spaces such as classrooms are often duplicated. This makes them preferred candidates for the research that was undertaken where energy-efficient solutions that can be transferred to different school designs were derived. Throughout the study, the Commercial Building Incentive Program (CBIP) was used as a benchmark. The objectives of the study were to demonstrate energy-efficient concepts, provide a case study to evaluate solutions, develop typological models and provide an understanding of the innovation process. The technological and societal aspects of the energy-efficient design were addressed. With respect to the technological aspects, the first step was the analysis of conventional design using a school in Calgary as a case study. The optimization of conventional design was undertaken using computer modeling to identify best practice solutions. Aspects that were included in the studies were lighting design, envelope characteristics, HVAC systems and building plant systems. The inclusion of passive design included the analysis of daylighting and natural ventilation. Computer modeling was used to assess daylighting in classrooms with unilateral and bilateral daylighting. Illuminance levels, glare and light distribution were evaluated. The study of natural ventilation was undertaken using literature review. Airflow and outdoor temperatures were the focus to identify solutions that could be incorporated into the design of classrooms. It was concluded that achieving excellence in energy efficiency in schools could be achieved using readily available technologies. Energy savings of up to 63 percent better

  10. Understanding Plant-Microbe Interactions for Phytoremediation of Petroleum-Polluted Soil

    PubMed Central

    Nie, Ming; Wang, Yijing; Yu, Jiayi; Xiao, Ming; Jiang, Lifen; Yang, Ji; Fang, Changming; Chen, Jiakuan; Li, Bo

    2011-01-01

    Plant-microbe interactions are considered to be important processes determining the efficiency of phytoremediation of petroleum pollution, however relatively little is known about how these interactions are influenced by petroleum pollution. In this experimental study using a microcosm approach, we examined how plant ecophysiological traits, soil nutrients and microbial activities were influenced by petroleum pollution in Phragmites australis, a phytoremediating species. Generally, petroleum pollution reduced plant performance, especially at early stages of plant growth. Petroleum had negative effects on the net accumulation of inorganic nitrogen from its organic forms (net nitrogen mineralization (NNM)) most likely by decreasing the inorganic nitrogen available to the plants in petroleum-polluted soils. However, abundant dissolved organic nitrogen (DON) was found in petroleum-polluted soil. In order to overcome initial deficiency of inorganic nitrogen, plants by dint of high colonization of arbuscular mycorrhizal fungi might absorb some DON for their growth in petroleum-polluted soils. In addition, through using a real-time polymerase chain reaction method, we quantified hydrocarbon-degrading bacterial traits based on their catabolic genes (i.e. alkB (alkane monooxygenase), nah (naphthalene dioxygenase) and tol (xylene monooxygenase) genes). This enumeration of target genes suggests that different hydrocarbon-degrading bacteria experienced different dynamic changes during phytoremediation and a greater abundance of alkB was detected during vegetative growth stages. Because phytoremediation of different components of petroleum is performed by different hydrocarbon-degrading bacteria, plants’ ability of phytoremediating different components might therefore vary during the plant life cycle. Phytoremediation might be most effective during the vegetative growth stages as greater abundances of hydrocarbon-degrading bacteria containing alkB and tol genes were observed

  11. Case-control study on the association between a cluster of childhood haematopoietic malignancies and local environmental factors in Aalsmeer, The Netherlands.

    PubMed Central

    Mulder, Y M; Drijver, M; Kreis, I A

    1994-01-01

    STUDY OBJECTIVE AND DESIGN--In Aalsmeer, a horticultural community near the main international airport in The Netherlands, a more than fourfold increase in the incidence of haematopoietic malignancies in young people was observed between 1980 and 1985. In a population based case-control study, the association with local environmental factors was investigated. PARTICIPANTS--For each patient younger than 40 years of age (n = 14) diagnosed between 1975 and 1989, four age and sex matched controls were selected via local general practitioners. METHODS--All parents of patients and controls completed a questionnaire on their lifestyle, living conditions, and health, for several years preceding each individual diagnosis. Odds ratios (ORs) with 95% confidence intervals (CI) were calculated, matched, and, if necessary, stratified for neighbourhood. MAIN RESULTS--Increased ORs were recorded for intensive use of petroleum products and pesticides by the patients themselves and their fathers: OR petroleum products: 8.0 (95% CI 2.2, 129.9) and 9.0 (1.0, 66.1) respectively; OR pesticides: 6.0 (0.6, 49.3) and 3.2 (1.0, 10.1) respectively. Swimming in a local pond was also significantly associated with the disease: OR = 5.3 (1.3, 17.4). In the 1970s this pond had been polluted by petroleum products and pesticides. CONCLUSIONS--The increased incidence of childhood haematopoietic malignancies in Aalsmeer may have been associated with several specific local environmental factors. Interpretation of the results, however, should take into account the fact that confidence intervals were wide because of the limited number of cases. PMID:8189171

  12. Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

    ERIC Educational Resources Information Center

    Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

    2018-01-01

    This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

  13. Commercial assessment of petroleum systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stickland, P.J.

    1996-12-31

    One of the more difficult tasks facing an exploration team conducting a large regional prospectivity study is integrating the diverse data so that business decisions can be made. When is one Petroleum System more commercially attractive than another? They may have different geological risks and field sizes, but also different development and fiscal conditions. BHP Petroleum has developed a technique which incorporates all of the above factors into a decision making criteria called the Value Index. To achieve this each Petroleum System requires subdivision into smaller, more commercially focused units. These are termed Play Fairways. Play Fairways are temporally andmore » spatially distinct reservoir/seal packages. A number of these Play Fairways may exist within one Petroleum System. The Expected Value (EV) concept is widely established as a decision making tool for prospects but is inappropriate for evaluating a Play Fairway. The Value Index method applies the spirit of EV to the Play Fairway without the rigorous detail. The key factors in the Value Index calculation are: the probability that there will be at least one further discovery in the fairway, the estimated number of future discoveries, the discovery size distribution and the NPV versus reserves function. These are combined in a monte-carlo package to allow uncertainty in each parameter. The advantage of the Value Index over other criteria is it allows a comparison of fairways balancing both geological and commercial issues. BHP Petroleum has found this technique, used in conjunction with other criteria, extremely useful for ranking exploration focus areas in Australia.« less

  14. Commercial assessment of petroleum systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stickland, P.J.

    1996-01-01

    One of the more difficult tasks facing an exploration team conducting a large regional prospectivity study is integrating the diverse data so that business decisions can be made. When is one Petroleum System more commercially attractive than another They may have different geological risks and field sizes, but also different development and fiscal conditions. BHP Petroleum has developed a technique which incorporates all of the above factors into a decision making criteria called the Value Index. To achieve this each Petroleum System requires subdivision into smaller, more commercially focused units. These are termed Play Fairways. Play Fairways are temporally andmore » spatially distinct reservoir/seal packages. A number of these Play Fairways may exist within one Petroleum System. The Expected Value (EV) concept is widely established as a decision making tool for prospects but is inappropriate for evaluating a Play Fairway. The Value Index method applies the spirit of EV to the Play Fairway without the rigorous detail. The key factors in the Value Index calculation are: the probability that there will be at least one further discovery in the fairway, the estimated number of future discoveries, the discovery size distribution and the NPV versus reserves function. These are combined in a monte-carlo package to allow uncertainty in each parameter. The advantage of the Value Index over other criteria is it allows a comparison of fairways balancing both geological and commercial issues. BHP Petroleum has found this technique, used in conjunction with other criteria, extremely useful for ranking exploration focus areas in Australia.« less

  15. Human Resource Local Content in Ghana's Upstream Petroleum Industry

    NASA Astrophysics Data System (ADS)

    Benin, Papa

    Enactment of Ghana's Petroleum (Local Content and Local Participation) Regulations, 2013 (L.I. 2204) was intended to regulate the percentage of local products, personnel, financing, and goods and services rendered within Ghana's upstream petroleum industry value chain. Five years after the inception of Ghana's upstream oil and gas industry, a gap is evident between the requirements of L.I. 2204 and professional practice. Drawing on Lewin's change theory, a cross-sectional study was conducted to examine the extent of differences between the prevailing human resource local content and the requirements of L.I. 2204 in Ghana's upstream petroleum industry. The extent to which training acquired by indigenous Ghanaians seeking jobs in Ghana's oil fields affects the prevalent local content in its upstream petroleum industry was also examined. Survey data were collected from 97 management, technical, and other staff in 2 multinational petroleum companies whose oil and gas development plans have been approved by the Petroleum Commission of Ghana. To answer the research questions and test their hypotheses, one-way ANOVA was performed with staff category (management, technical, and other) as the independent variable and prevalent local content as the dependent variable. Results indicated that prevailing local content in Ghana's upstream petroleum industry meets the requirements of L.I. 2204. Further, training acquired by indigenous Ghanaians seeking jobs in Ghana's oil fields affects the prevalent local content in its offshore petroleum industry. Findings may encourage leaders within multinational oil companies and the Petroleum Commission of Ghana to organize educational seminars that equip indigenous Ghanaians with specialized skills for working in Ghana's upstream petroleum industry.

  16. Mapping the petroleum system - An investigative technique to explore the hydrocarbon fluid system

    USGS Publications Warehouse

    Magoon, L.B.; Dow, W.G.

    2000-01-01

    Creating a petroleum system map includes a series of logical steps that require specific information to explain the origin in time and space of discovered hydrocarbon occurrences. If used creatively, this map provides a basis on which to develop complementary plays and prospects. The logical steps include the characterization of a petroleum system (that is, to identify, map, and name the hydrocarbon fluid system) and the summary of these results on a folio sheet. A petroleum system map is based on the understanding that there are several levels of certainty from "guessing" to "knowing" that specific oil and gas accumulations emanated from a particular pod of active source rock. Levels of certainty start with the close geographic proximity of two or more accumulations, continues with the close stratigraphic proximity, followed by the similarities in bulk properties, and then detailed geochemical properties. The highest level of certainty includes the positive geochemical correlation of the hydrocarbon fluid in the accumulations to the extract of the active source rock. A petroleum system map is created when the following logic is implemented. Implementation starts when the oil and gas accumulations of a petroleum province are grouped stratigraphically and geographically. Bulk and geochemical properties are used to further refine the groups through the determination of genetically related oil and gas types. To this basic map, surface seeps and well shows are added. Similarly, the active source rock responsible for these hydrocarbon occurrences are mapped to further define the extent of the system. A folio sheet constructed for a hypothetical case study of the Deer-Boar(.) petroleum system illustrates this methodology.

  17. 2013 strategic petroleum reserve big hill well integrity grading report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lord, David L.; Roberts, Barry L.; Lord, Anna C. Snider

    2014-02-01

    This report summarizes the work performed in developing a framework for the prioritization of cavern access wells for remediation and monitoring at the Big Hill Strategic Petroleum Reserve site. This framework was then applied to all 28 wells at the Big Hill site with each well receiving a grade for remediation and monitoring. Numerous factors affecting well integrity were incorporated into the grading framework including casing survey results, cavern pressure history, results from geomechanical simulations, and site geologic factors. The framework was developed in a way as to be applicable to all four of the Strategic Petroleum Reserve sites.

  18. What's in a Name? The Incorrect Use of Case Series as a Study Design Label in Studies Involving Dogs and Cats.

    PubMed

    Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A

    2017-07-01

    Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  19. Modeling of wastewater treatment system of car parks from petroleum products

    NASA Astrophysics Data System (ADS)

    Savdur, S. N.; Stepanova, Yu V.; Kodolova, I. A.; Fesina, E. L.

    2018-05-01

    The paper discusses the technological complex of wastewater treatment of car parks from petroleum products. Based on the review of the main modeling methods of discrete-continuous chemical and engineering processes, it substantiates expediency of using the theory of Petri nets (PN) for modeling the process of wastewater treatment of car parks from petroleum products. It is proposed to use a modification of Petri nets which is focused on modeling and analysis of discrete-continuous chemical and engineering processes by prioritizing transitions, timing marks in positions and transitions. A model in the form of modified Petri nets (MPN) is designed. A software package to control the process for wastewater treatment is designed by means of SCADA TRACE MODE.

  20. Field study of in situ remediation of petroleum hydrocarbon contaminated soil on site using microwave energy.

    PubMed

    Chien, Yi-Chi

    2012-01-15

    Many laboratory-scale studies strongly suggested that remediation of petroleum hydrocarbon contaminated soil by microwave heating is very effective; however, little definitive field data existed to support the laboratory-scale observations. This study aimed to evaluate the performance of a field-scale microwave heating system to remediate petroleum hydrocarbon contaminated soil. A constant microwave power of 2 kW was installed directly in the contaminated area that applied in the decontamination process for 3.5h without water input. The C10-C40 hydrocarbons were destroyed, desorbed or co-evaporated with moisture from soil by microwave heating. The moisture may play an important role in the absorption of microwave and in the distribution of heat. The success of this study paved the way for the second and much larger field test in the remediation of petroleum hydrocarbon contaminated soil by microwave heating in place. Implemented in its full configuration for the first time at a real site, the microwave heating has demonstrated its robustness and cost-effectiveness in cleaning up petroleum hydrocarbon contaminated soil in place. Economically, the concept of the microwave energy supply to the soil would be a network of independent antennas which powered by an individual low power microwave generator. A microwave heating system with low power generators shows very flexible, low cost and imposes no restrictions on the number and arrangement of the antennas. Copyright © 2011 Elsevier B.V. All rights reserved.

  1. 77 FR 42297 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil... National Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that... Matters Discussion of Any Other Business Properly Brought Before the National Petroleum Council...

  2. 76 FR 53889 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-30

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil... Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public... Properly Brought Before the National, Petroleum Council, Adjournment. Public Participation: The meeting is...

  3. Petroleum supply monthly, with data for September 1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-11-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products inmore » the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.« less

  4. Beyond access: a case study on the intersection between accessibility, sustainability, and universal design.

    PubMed

    Gossett, Andrea; Mirza, Mansha; Barnds, Ann Kathleen; Feidt, Daisy

    2009-11-01

    A growing emphasis has been placed on providing equal opportunities for all people, particularly people with disabilities, to support participation. Barriers to participation are represented in part by physical space restrictions. This article explores the decision-making process during the construction of a new office building housing a disability-rights organization. The building project featured in this study was developed on the principles of universal design, maximal accessibility, and sustainability to support access and participation. A qualitative case study approach was used involving collection of data through in-depth interviews with key decision-makers; non-participant observations at design meetings; and on-site tours. Qualitative thematic analysis along with the development of a classification system was used to understand specific building elements and the relevant decision processes from which they resulted. Recording and analyzing the design process revealed several key issues including grassroots involvement of stakeholders; interaction between universal design and sustainable design; addressing diversity through flexibility and universality; and segregationist accessibility versus universal design. This case study revealed complex interactions between accessibility, universal design, and sustainability. Two visual models were proposed to understand and analyze these complexities.

  5. Engineering geology studies in the National Petroleum Reserve, Alaska

    USGS Publications Warehouse

    Kachadoorian, Reuben; Crory, F.E.

    1984-01-01

    Engineering geology studies were conducted in direct support of the exploration program in the National Petroleum Reserve, Alaska. The studies included laboratory and field tests and observations to address design and construction problems of airfields, roads, drill pads and foundations, and to evaluate their actual performance. Permafrost containing large amounts of near surface ground ice as wedges, masses, and intergranular ice, required that all construction activity not disturb the thermal regime of the ground surface, which could lead to thaw of permafrost and ground subsidence. Summer activity, therefore was not allowable, yet the winter climate was so harsh that winter work was slow and inefficient. To allow summer operations at well sites planned for all year activity, it was necessary to adapt existing techniques for arctic construction and to devise new ones. The design and construction of facilities at the deep exploration wells at Inigok, Tunalik, and Lisburne posed the greatest challenge. These sites, requiring a year or more to drill, could only be attempted if continuous access to drilling and logistic supplies could be assured throughout the year, including the possibility of bringing in another drill rig, in the event of a blowout. Thus all-seasons airstrips were required at these wells. Sufficient quantities of local gravel were not readily available at the Inigok and Tunalik sites to construct the airstrips with the required 6 feet or more of gravel to prevent the underlying permafrost from thawing. Therefore, insulation was used to maintain the subbase of local sands in a continuously frozen state, which in turn was overlain by 15 inches of gravel or sandy gravel. Tests at the U.S. Army Waterways Experimental Station defined the minimum thickness of gravel required above the insulation to provide the desired bearing capacity for the C-130 type aircraft without crushing the insulation. Field testing also included the evaluation of another design

  6. Petroleum supply monthly, April 1991. [Glossary included

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-04-29

    Data presented in the PSM (Petroleum Supply Monthly) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated,more » the data reported by these sectors approximately represent the consumption of petroleum products in the United States. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. Industry terminology and product definitions are listed alphabetically in the Glossary. 14 figs., 65 tabs.« less

  7. Impact of non-petroleum vehicle fuel economy on GHG mitigation potential

    NASA Astrophysics Data System (ADS)

    Luk, Jason M.; Saville, Bradley A.; MacLean, Heather L.

    2016-04-01

    The fuel economy of gasoline vehicles will increase to meet 2025 corporate average fuel economy standards (CAFE). However, dedicated compressed natural gas (CNG) and battery electric vehicles (BEV) already exceed future CAFE fuel economy targets because only 15% of non-petroleum energy use is accounted for when determining compliance. This study aims to inform stakeholders about the potential impact of CAFE on life cycle greenhouse gas (GHG) emissions, should non-petroleum fuel vehicles displace increasingly fuel efficient petroleum vehicles. The well-to-wheel GHG emissions of a set of hypothetical model year 2025 light-duty vehicles are estimated. A reference gasoline vehicle is designed to meet the 2025 fuel economy target within CAFE, and is compared to a set of dedicated CNG vehicles and BEVs with different fuel economy ratings, but all vehicles meet or exceed the fuel economy target due to the policy’s dedicated non-petroleum fuel vehicle incentives. Ownership costs and BEV driving ranges are estimated to provide context, as these can influence automaker and consumer decisions. The results show that CNG vehicles that have lower ownership costs than gasoline vehicles and BEVs with long distance driving ranges can exceed the 2025 CAFE fuel economy target. However, this could lead to lower efficiency CNG vehicles and heavier BEVs that have higher well-to-wheel GHG emissions than gasoline vehicles on a per km basis, even if the non-petroleum energy source is less carbon intensive on an energy equivalent basis. These changes could influence the effectiveness of low carbon fuel standards and are not precluded by the light-duty vehicle GHG emissions standards, which regulate tailpipe but not fuel production emissions.

  8. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Petroleum wax, synthetic. 178.3720 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum wax...

  9. 21 CFR 178.3720 - Petroleum wax, synthetic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Petroleum wax, synthetic. 178.3720 Section 178.3720... Certain Adjuvants and Production Aids § 178.3720 Petroleum wax, synthetic. Synthetic petroleum wax may be safely used in applications and under the same conditions where naturally derived petroleum wax is...

  10. 78 FR 40131 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Office of Fossil Energy, Department of... Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public... Administrative Matters Discussion of Any Other Business Properly Brought Before the National Petroleum Council...

  11. The effect of plants on the degradation and toxicity of petroleum contaminants in soil: a field assessment.

    PubMed

    Banks, M K; Schwab, P; Liu, B; Kulakow, P A; Smith, J S; Kim, R

    2003-01-01

    A field project located at the US Naval Base at Port Hueneme, California was designed to evaluate changes in contaminant concentrations and toxicity during phytoremediation. Vegetated plots were established in petroleum (diesel and heavy oil) contaminated soil and were evaluated over a two-year period. Plant species were chosen based on initial germination studies and included native California grasses. The toxicity of the impacted soil in vegetated and unvegetated plots was evaluated using Microtox, earthworm, and seed germination assays. The reduction of toxicity was affected more by contaminant aging than the establishment of plants. However, total petroleum hydrocarbon concentrations were lower by the end of the study in the vegetated plots when compared to the unvegetated soil. Although phytoremediation is an effective approach for cleaning-up of petroleum contaminated soil, a long-term management plan is required for significant reductions in contaminant concentrations.

  12. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is a...

  13. 21 CFR 172.888 - Synthetic petroleum wax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Synthetic petroleum wax. 172.888 Section 172.888... CONSUMPTION Multipurpose Additives § 172.888 Synthetic petroleum wax. Synthetic petroleum wax may be safely used in or on foods in accordance with the following conditions: (a) Synthetic petroleum wax is a...

  14. Toxicology of oil field wastes. Hazards to livestock associated with the petroleum industry.

    PubMed

    Edwards, W C

    1989-07-01

    In oil-producing states, the proximity of livestock to drilling operations and production sites often results in poisoning of animals from ingestion of crude oil, condensate, salt water, heavy metals, and caustic chemicals. The heavy metals encountered most frequently are lead from pipe joint compound and arsenicals and chromates used as corrosion inhibitors. Numerous toxic and caustic chemicals are used in drilling muds and fluids. Crude oil and salt water spills are common occurrences around production sites. Pipeline breaks may result in exposure of livestock to crude oil or refined petroleum hydrocarbons. Ingestion of petroleum hydrocarbons may result in sudden death from peracute bloat. The most common cause of illness or death following exposure to petroleum hydrocarbons is aspiration pneumonia, which may cause a chronic progressive deterioration of health, with death after several days or weeks. Cases in which livestock are exposed to oil, salt water, or caustic chemicals, but do not die acutely or from aspiration pneumonia are more frustrating to diagnose. In these cases, parasitism, poor nutrition, and other debilitating diseases must be considered. Anorexia, weight loss, and decreased rumen motility may be caused by a disruption of normal rumen function. Petroleum hydrocarbons, salt water, and caustic chemicals have the potential of altering rumen flora and enzymatic processes as well as damaging the ruminal and gastrointestinal epithelium. The toxicity of petroleum hydrocarbons appears to be related more closely to the volatility and viscosity of the product than to other factors. The more volatile straight chain and aromatic petroleum hydrocarbons have a greater potential for aspiration pneumonia and may produce an anesthetic-like action if absorbed systemically. The more volatile petroleum hydrocarbons also are more irritating to skin and mucous membranes and appear to be more damaging to rumen flora. Treatment of petroleum hydrocarbon ingestion is

  15. Issues in Designing a Hypermedia Document System: The Intermedia Case Study.

    ERIC Educational Resources Information Center

    Yankelovich, Nicole; And Others

    1986-01-01

    Intermedia, a hypermedia system developed at Brown University's Institute for Research (Rhode Island) in Information and Scholarship, is first described, and then used as a case study to explore a number of key issues that software designers must consider in the development of hypermedia document systems. A hypermedia document system is defined as…

  16. Petroleum service projects in the Gulf of Guinea

    NASA Astrophysics Data System (ADS)

    Ken-Worgu, Kenneth Chukwumeka

    2011-07-01

    The goal of this record of study is to examine the major facets involved in managing several petroleum service projects located in three different countries in the Gulf of Guinea simultaneously, while effectively engaging in business development activities for the Oil and Industrial Services Group (OIS). This work also furnishes adequate background on related subject matters to enable understanding of the projects presented. The petroleum services sector is the back bone of the oil and gas industry. Services companies are vital to the success of all petroleum and energy producers in the USA, the Gulf of Guinea and the world. There is a need and demand for these service companies because they play various roles such as logistics, drilling, construction, dredging, pipe laying, procurement, food supply, human resource supply, etc. The Gulf of Guinea comprises of countries from west and central Africa. This project was limited to Nigeria, Equatorial Guinea and Cameroon. This area holds the largest petroleum reserves in Africa and plays a vital role in the global supply of petroleum. The Oil and Industrial Services Group (OIS), plans to establish herself as one of the leading petroleum service companies in this gulf. To manage this expansion, I have taken the role of Gulf of Guinea manager to apply my background as a petroleum engineer as well as my business skills to build a successful division of the company. This work provides a record of study of the management of services, projects and contracts carried out by the OIS group in the gulf of Guinea. The following are the specific projects in the Gulf of Guinea that I participated in: Managing delivering, maintenance and marketing of offshore vessels, Offshore pipe laying project, Integrated pipeline maintenance project, Development a petroleum technical training facilities, Agbami pipe insulation project, Engineering lift project and Capital budgeting analysis for potential investments. The details of the specific

  17. Short-Term Energy Outlook Model Documentation: Petroleum Product Prices Module

    EIA Publications

    2015-01-01

    The petroleum products price module of the Short-Term Energy Outlook (STEO) model is designed to provide U.S. average wholesale and retail price forecasts for motor gasoline, diesel fuel, heating oil, and jet fuel.

  18. [The choice of the type of design in the clinical investigation studies. Case and control studies].

    PubMed

    Posada de la Paz, M

    2004-09-01

    Case-control studies are appropriate designs in neurology sciences to search for risk factors that have already occurred in a group of patients. In them, the subjects are selected on the basis of whether they have the disease or not and then they are compared in regards to the risk factor or prognosis investigated. These sorts of designs can be performed in a shorter and cheaper way than the regular cohort studies. They are appropriate for the evaluation of rare diseases and can examine multiple etiological factors for a single disease. On the contrary, they are not so efficient when rare exposures are involved. Incidence rates in exposed and non-exposed subjects cannot be calculated and on some occasions, the timing between exposure and outcome can be very difficult to establish. The Odds Ratio and its confident intervals is the measurement used for estimating the risk strength in this design. The clinical neurologist should be familiar with these terms, given the frequency of case-control studies described in neurology science literature, and should know their principal advantages and limitations.

  19. Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

    ERIC Educational Resources Information Center

    Jung, Ji yoon

    2017-01-01

    The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

  20. Taxation of income of multinational corporations: the case of the United States petroleum industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jenkins, G.P.; Wright, B.D.

    1975-02-01

    While U.S. petroleum corporations pay no U.S. tax on foreign income, they received in the 1969-1972 period a rate of return on foreign investment comparable to domestic corporate investments. The present U.S. tax system allows tax credits from one foreign country to offset U.S. taxes from foreign income, with the result that the U.S. receives virtually no corporate income tax from foreign petroleum investments. The multinational corporations use transfer pricing to shift profits between countries so that tax liabilities will be minimized. Loss of revenue to consumer countries due to transfer pricing is estimated at $205 million in 1966 andmore » $240 million in 1970. (19 references) (DCK)« less

  1. Petroleum.

    ERIC Educational Resources Information Center

    McManus, T. R.; And Others

    1989-01-01

    This review of petroleum covers: crude oil; fuels, gaseous and liquid; lubricants, oils, and greases; asphalts, bitumens, tars, and pitches; hydrocarbons; physical properties; metals in oil; nonmetallic elements and heterocompounds; and analytical methods and apparatus. (MVL)

  2. Integrating Quality Matters into Hybrid Course Design: A Principles of Marketing Case Study

    ERIC Educational Resources Information Center

    Young, Mark R.

    2014-01-01

    Previous research supports the idea that the success of hybrid or online delivery modes is more a function of course design than delivery media. This article describes a case study of a hybrid Principles of Marketing course that implemented a comprehensive redesign based on design principles espoused by the Quality Matters Program, a center for…

  3. Multiple case studies of STEM teachers' orientations to science teaching through engineering design

    NASA Astrophysics Data System (ADS)

    Rupp, Madeline

    The following master's thesis is composed of two manuscripts describing STEM teachers' orientations to science teaching through engineering within the context of the Science Learning through Engineering Design (SLED) partnership. The framework guiding both studies was science teaching orientations, a component of pedagogical content knowledge. Data were collected via semi-structured interviews, multi-day classroom observations, pre- and post-observation interviews, implementation plans, and written reflections. Data sources were analyzed to generate two orientations to science teaching through engineering design for each participant. The first manuscript illustrates a single case study conducted with a sixth grade STEM teacher. Results of this study revealed a detailed picture of the teacher's goals, practices, assessments, and general views when teaching science through engineering design. Common themes across the teacher's instruction were used to characterize her orientations to science teaching through engineering design. Overall, the teacher's orientations showed a shift in her practice from didactic to student-centered methods of teaching as a result of integrating engineering design-based curriculum. The second manuscript describes a comparative case study of two sixth grade SLED participants. Results of this study revealed more complex and diverse relationships between the teachers' orientations to teaching science through engineering design and their instruction. Participants' orientations served as filters for instruction, guided by their divergent purposes for science teaching. Furthermore, their orientations and resulting implementation were developed from knowledge gained in teacher education, implying that teacher educators and researchers can use this framework to learn more about how teachers' knowledge is used to integrate engineering and science practices in the K-12 classroom.

  4. Poland petroleum refinery sludge lagoon demonstration project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altman, D.J.

    The US Department of Energy and the Institute for Ecology of Industrial Area have been working together to develop mutually beneficial, cost-effective environmental remediation technologies such as the demonstration of bioremediation techniques for the clean up of acidic petroleum sludge impacted soils at an oil refinery in southern Poland. After an expedited site characterization, treatability study, and a risk assessment study, a remediation strategy was devised. The waste material was composed primarily of high molecular weight paraffinic and polynuclear aromatic hydrocarbons. A biopile design which employed a combination of passive and active aeration in conjunction with nutrient and surfactant applicationmore » as used to increase the biodegradation of the contaminants of concern.« less

  5. Environmental hazard and risk characterisation of petroleum substances: a guided "walking tour" of petroleum hydrocarbons.

    PubMed

    Bierkens, Johan; Geerts, Lieve

    2014-05-01

    Petroleum substances are used in large quantities, primarily as fuels. They are complex mixtures whose major constituents are hydrocarbons derived from crude oil by distillation and fractionation. Determining the complete molecular composition of petroleum and its refined products is not feasible with current analytical techniques because of the huge number of molecular components. This complex nature of petroleum products, with their varied number of constituents, all of them exhibiting different fate and effect characteristics, merits a dedicated hazard and risk assessment approach. From a regulatory perspective they pose a great challenge in a number of REACH processes, in particular in the context of dossier and substance evaluation but also for priority setting activities. In order to facilitate the performance of hazard and risk assessment for petroleum substances the European oil company association, CONCAWE, has developed the PETROTOX and PETRORISK spreadsheet models. Since the exact composition of many petroleum products is not known, an underlying assumption of the PETROTOX and PETRORISK tools is that the behaviour and fate of a total petroleum substance can be simulated based on the physical-chemical properties of representative structures mapped to hydrocarbon blocks (HBs) and on the relative share of each HB in the total mass of the product. To assess how differing chemical compositions affect the simulated chemical fate and toxicity of hydrocarbon mixtures, a series of model simulations were run using an artificial petroleum substance, containing 386 (PETROTOX) or 160 (PETRORISK) HBs belonging to different chemical classes and molecular weight ranges, but with equal mass assigned to each of them. To this artificial petroleum substance a guided series of subsequent modifications in mass allocation to a delineated number of HBs belonging to different chemical classes and carbon ranges was performed, in what we perceived as a guided "walking tour

  6. Petroleum supply monthly, February 1991. [Glossary included

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-02-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated,more » the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 12 figs., 54 tabs.« less

  7. Future petroleum energy resources of the world

    USGS Publications Warehouse

    Ahlbrandt, T.S.

    2002-01-01

    and gas endowment estimates. Whereas petroleum resources in the world appear to be significant, certain countries such as the United States may run into import deficits, particularly oil imports from Mexico and natural gas from both Canada and Mexico. The new assessment has been used as the reference supply case in energy supply models by the International Energy Agency and the Energy Information Agency of the Department of Energy. Climate energy modeling groups such as those at Stanford University, Massachusetts Institute of Technology, and others have also used USGS estimates in global climate models. Many of these models using the USGS estimates converge on potential oil shortfalls in 2036-2040. However, recent articles using the USGS (2000) estimates suggest peaking of oil in 2020-2035 and peaking of non-OPEC (Organization of Petroleum-Exporting Countries) oil in 2015-2020. Such a short time framework places greater emphasis on a transition to increased use of natural gas; i.e., a methane economy. Natural gas in turn may experience similar supply concerns in the 2050-2060 time frame according to some authors. Coal resources are considerable and provide significant petroleum potential either by extracting natural gas from them, by directly converting them into petroleum products, or by utilizing them to generate electricity, thereby reducing natural gas and oil requirements by fuel substitution. Non-conventional oil and gas are quite common in petroleum provinces of the world and represent a significant resources yet to be fully studied and developed. Seventeen non-conventional AU including coal-bed methane, basin-center gas, continuous oil, and gas hydrate occurrences have been preliminarily identified for future assessment. Initial efforts to assess heavy oil deposits and other non-conventional oil and gas deposits also are under way.

  8. Emergency department injury surveillance and aetiological research: bridging the gap with the two-stage case-control study design.

    PubMed

    Hagel, Brent E

    2011-04-01

    To provide an overview of the two-stage case-control study design and its potential application to ED injury surveillance data and to apply this approach to published ED data on the relation between brain injury and bicycle helmet use. Relevant background is presented on injury aetiology and case-control methodology with extension to the two-stage case-control design in the context of ED injury surveillance. The design is then applied to data from a published case-control study of the relation between brain injury and bicycle helmet use with motor vehicle involvement considered as a potential confounder. Taking into account the additional sampling at the second stage, the adjusted and corrected odds ratio and 95% confidence interval for the brain injury-helmet use relation is presented and compared with the estimate from the entire original dataset. Contexts where the two-stage case-control study design might be most appropriately applied to ED injury surveillance data are suggested. The adjusted odds ratio for the relation between brain injury and bicycle helmet use based on all data (n = 2833) from the original study was 0.34 (95% CI 0.25 to 0.46) compared with an estimate from a two-stage case-control design of 0.35 (95% CI 0.25 to 0.48) using only a fraction of the original subjects (n = 480). Application of the two-stage case-control study design to ED injury surveillance data has the potential to dramatically reduce study time and resource costs with acceptable losses in statistical efficiency.

  9. PETRORISK: a risk assessment framework for petroleum substances.

    PubMed

    Redman, Aaron D; Parkerton, Thomas F; Comber, Mike H I; Paumen, Miriam Leon; Eadsforth, Charles V; Dmytrasz, Bhodan; King, Duncan; Warren, Christopher S; den Haan, Klaas; Djemel, Nadia

    2014-07-01

    PETRORISK is a modeling framework used to evaluate environmental risk of petroleum substances and human exposure through these routes due to emissions under typical use conditions as required by the European regulation for the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). Petroleum substances are often complex substances comprised of hundreds to thousands of individual hydrocarbons. The physicochemical, fate, and effects properties of the individual constituents within a petroleum substance can vary over several orders of magnitude, complicating risk assessment. PETRORISK combines the risk assessment strategies used on single chemicals with the hydrocarbon block approach to model complex substances. Blocks are usually defined by available analytical characterization data on substances that are expressed in terms of mass fractions for different structural chemical classes that are specified as a function of C number or boiling point range. The physicochemical and degradation properties of the blocks are determined by the properties of representative constituents in that block. Emissions and predicted exposure concentrations (PEC) are then modeled using mass-weighted individual representative constituents. Overall risk for various environmental compartments at the regional and local level is evaluated by comparing the PECs for individual representative constituents to corresponding predicted no-effect concentrations (PNEC) derived using the Target Lipid Model. Risks to human health are evaluated using the overall predicted human dose resulting from multimedia environmental exposure to a substance-specific derived no-effect level (DNEL). A case study is provided to illustrate how this modeling approach has been applied to assess the risks of kerosene manufacture and use as a fuel. © 2014 SETAC.

  10. Using a contextualized sensemaking model for interaction design: A case study of tumor contouring.

    PubMed

    Aselmaa, Anet; van Herk, Marcel; Laprie, Anne; Nestle, Ursula; Götz, Irina; Wiedenmann, Nicole; Schimek-Jasch, Tanja; Picaud, Francois; Syrykh, Charlotte; Cagetti, Leonel V; Jolnerovski, Maria; Song, Yu; Goossens, Richard H M

    2017-01-01

    Sensemaking theories help designers understand the cognitive processes of a user when he/she performs a complicated task. This paper introduces a two-step approach of incorporating sensemaking support within the design of health information systems by: (1) modeling the sensemaking process of physicians while performing a task, and (2) identifying software interaction design requirements that support sensemaking based on this model. The two-step approach is presented based on a case study of the tumor contouring clinical task for radiotherapy planning. In the first step of the approach, a contextualized sensemaking model was developed to describe the sensemaking process based on the goal, the workflow and the context of the task. In the second step, based on a research software prototype, an experiment was conducted where three contouring tasks were performed by eight physicians respectively. Four types of navigation interactions and five types of interaction sequence patterns were identified by analyzing the gathered interaction log data from those twenty-four cases. Further in-depth study on each of the navigation interactions and interaction sequence patterns in relation to the contextualized sensemaking model revealed five main areas for design improvements to increase sensemaking support. Outcomes of the case study indicate that the proposed two-step approach was beneficial for gaining a deeper understanding of the sensemaking process during the task, as well as for identifying design requirements for better sensemaking support. Copyright © 2016. Published by Elsevier Inc.

  11. A Case Study in Design Thinking Applied Through Aviation Mission Support Tactical Advancements for the Next Generation (TANG)

    DTIC Science & Technology

    2017-12-01

    This is an examination of the research, execution, and follow- on developments supporting the Design Thinking event explored through Case Study ...research, execution, and follow- on developments supporting the Design Thinking event explored through case study methods. Additionally, the lenses of...total there have been two Naval Postgraduate School (NPS) case study theses on U.S. Navy innovation events as well as other works examining the

  12. Chapter 32: Geology and petroleum potential of the Arctic Alaska petroleum province

    USGS Publications Warehouse

    Bird, K.J.; Houseknecht, D.W.

    2011-01-01

    The Arctic Alaska petroleum province encompasses all lands and adjacent continental shelf areas north of the Brooks Range-Herald Arch orogenic belt and south of the northern (outboard) margin of the Beaufort Rift shoulder. Even though only a small part is thoroughly explored, it is one of the most prolific petroleum provinces in North America with total known resources (cumulative production plus proved reserves) of c. 28 BBOE. The province constitutes a significant part of a displaced continental fragment, the Arctic Alaska microplate, that was probably rifted from the Canadian Arctic margin during formation of the Canada Basin. Petroleum prospective rocks in the province, mostly Mississippian and younger, record a sequential geological evolution through passive margin, rift and foreland basin tectonic stages. Significant petroleum source and reservoir rocks were formed during each tectonic stage but it was the foreland basin stage that provided the necessary burial heating to generate petroleum from the source rocks. The lion's share of known petroleum resources in the province occur in combination structural-stratigraphic traps formed as a consequence of rifting and located along the rift shoulder. Since the discovery of the super-giant Prudhoe Bay accumulation in one of these traps in the late 1960s, exploration activity preferentially focused on these types of traps. More recent activity, however, has emphasized the potential for stratigraphic traps and the prospect of a natural gas pipeline in this region has spurred renewed interest in structural traps. For assessment purposes, the province is divided into a Platform assessment unit (AU), comprising the Beaufort Rift shoulder and its relatively undeformed flanks, and a Fold-and-Thrust Belt AU, comprising the deformed area north of the Brooks Range and Herald Arch tectonic belt. Mean estimates of undiscovered, technically recoverable resources include nearly 28 billion barrels of oil (BBO) and 122 trillion

  13. 21 CFR 178.3530 - Isoparaffinic petroleum hydrocarbons, synthetic.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Isoparaffinic petroleum hydrocarbons, synthetic... hydrocarbons, synthetic. Isoparaffinic petroleum hydrocarbons, synthetic, may be safely used in the production... isoparaffinic petroleum hydrocarbons, produced by synthesis from petroleum gases consist of a mixture of liquid...

  14. 21 CFR 178.3530 - Isoparaffinic petroleum hydrocarbons, synthetic.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Isoparaffinic petroleum hydrocarbons, synthetic... hydrocarbons, synthetic. Isoparaffinic petroleum hydrocarbons, synthetic, may be safely used in the production... isoparaffinic petroleum hydrocarbons, produced by synthesis from petroleum gases consist of a mixture of liquid...

  15. A GIS-based modeling system for petroleum waste management. Geographical information system.

    PubMed

    Chen, Z; Huang, G H; Li, J B

    2003-01-01

    With an urgent need for effective management of petroleum-contaminated sites, a GIS-aided simulation (GISSIM) system is presented in this study. The GISSIM contains two components: an advanced 3D numerical model and a geographical information system (GIS), which are integrated within a general framework. The modeling component undertakes simulation for the fate of contaminants in subsurface unsaturated and saturated zones. The GIS component is used in three areas throughout the system development and implementation process: (i) managing spatial and non-spatial databases; (ii) linking inputs, model, and outputs; and (iii) providing an interface between the GISSIM and its users. The developed system is applied to a North American case study. Concentrations of benzene, toluene, and xylenes in groundwater under a petroleum-contaminated site are dynamically simulated. Reasonable outputs have been obtained and presented graphically. They provide quantitative and scientific bases for further assessment of site-contamination impacts and risks, as well as decisions on practical remediation actions.

  16. Petroleum exploration and the Atlantic OCS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Edson, G.; Adinolfi, F.; Gray, F.

    1993-08-01

    The largest Atlantic outer continental shelf (OCS) lease sale was the first one, Sale 40 in 1976. Ninety-three Baltimore Canyon Trough petroleum leases were issued, and industry's winning bids total $1.1 billion. The highest bonus bids were for leases overlying the Schlee Dome, then called Great Stone Dome, a large structure with a very large fetch area. By 1981, seven dry wells on the dome moderated this initial flush of optimism. However, subeconomic quantities of gas and light oil were discovered on the nearby Hudson Canyon Block 598-642 structure. Now after 9 lease sales, 410 lease awards, and 46 explorationmore » wells, United States Atlantic petroleum exploration activity is in a hiatus. Fifty-three leases remain active under suspensions of operation. Twenty-one lease blocks, about 50 mi offshore from Cape Hatteras, have been combined as the Manteo Exploration Unit. Mobil and partners submitted an exploration plant for the unit in 1989. The Atlantic OCS has petroleum potential, especially for gas. With only 46 exploration wells, entire basins and plays remain untested. During the present exploration inactivity, some petroleum evaluation of the Atlantic OCS continues by the Minerals Management Service and others. Similarities and differences are being documented between United States basins and the Canadian Scotian Basin, which contains oil and gas in commercial quantities. Other initiatives include geochemical, thermal history, seismic stratigraphic, and petroleum system modeling studies. The gas-prone Atlantic OCS eventually may make an energy contribution, especially to nearby East Coast markets.« less

  17. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, John M.; Napier, John M.; Travaglini, Michael A.

    1983-01-01

    A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced.

  18. Petroleum - politics and power

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brossard, E.B.

    1983-01-01

    Governments all over the world are politically maneuvering themselves into positions where they can use this precious resource as a tool to gain power. Notes the author, ''Even the largest oil company can be powerless against the smallest government.'' This thesis is the foundation of Brossard's investigation of the international oil industry and the power and politics that are involved in the struggle for dominance. Contents: The petroleum age; The Russian nobles and the Soviet Union; The Majors - big oil; The complex operations of the oil industry; U.S. government controls; Natural gas - the most efficient fuel; The Organizationmore » of Petroleum Exporting Countries; OPEC and the international market; Canadian petroleum; Alaska - the hope of the Lower 48.« less

  19. Learning to Think Spatially in an Undergraduate Interdisciplinary Computational Design Context: A Case Study

    ERIC Educational Resources Information Center

    Ben Youssef, Belgacem; Berry, Barbara

    2012-01-01

    Spatial thinking skills are vital for success in everyday living and work, not to mention the centrality of spatial reasoning in scientific discoveries, design-based disciplines, medicine, geosciences and mathematics to name a few. This case study describes a course in spatial thinking and communicating designed and delivered by an…

  20. Bioremediation of petroleum-contaminated soil: A Review

    NASA Astrophysics Data System (ADS)

    Yuniati, M. D.

    2018-02-01

    Petroleum is the major source of energy for various industries and daily life. Releasing petroleum into the environment whether accidentally or due to human activities is a main cause of soil pollution. Soil contaminated with petroleum has a serious hazard to human health and causes environmental problems as well. Petroleum pollutants, mainly hydrocarbon, are classified as priority pollutants. The application of microorganisms or microbial processes to remove or degrade contaminants from soil is called bioremediation. This microbiological decontamination is claimed to be an efficient, economic and versatile alternative to physicochemical treatment. This article presents an overview about bioremediation of petroleum-contaminated soil. It also includes an explanation about the types of bioremediation technologies as well as the processes.

  1. A prospective study in the Australian petroleum industry. II. Incidence of cancer.

    PubMed Central

    Christie, D; Robinson, K; Gordon, I; Bisby, J

    1991-01-01

    This paper reports incidence of cancer in employees of the Australian petroleum industry from 1981 to 1989. Two surveys by personal interview incorporated more than 15,000 employees, representing 92% of the eligible population. Subjects were included in the analysis after completing five years of service in the industry. At the time of this report the cohort did not include sufficiently large numbers of women for useful analysis; results presented are restricted to the men. On 31 December 1989, 50,254 person-years of observation had accumulated in the men with 152 incident cancers reported. The standardised incidence ratio (SIR) analysis showed overall cancer rates close to those of the national population. Whereas deficits were seen in some cancer sites, notably lung cancer (SIR 0.5, 95% confidence internal (95% CI) 0.3-0.9), incidence rates for some other cancer sites suggested increased risk. An excess of observed over expected cases was present in all subcategories of lymphohaematopoietic cancer except Hodgkin's disease (no cases), and was most apparent in myeloid leukaemia (SIR 4.0, 95% CI 1.6-8.2). The other major site with a raised number of cases observed over expected was melanoma (SIR 1.4, 95% CI 0.8-2.1). PMID:1878307

  2. A Case Study of MOOCs Design and Administration at Seoul National University

    ERIC Educational Resources Information Center

    Lim, Cheolil; Kim, Sunyoung; Kim, Mihwa; Han, Songlee; Seo, Seungil

    2014-01-01

    This research, based on the case study of edX at Seoul National University, which is running Korea's first Massive Open Online Courses (MOOCs), discussed and proposed the roles of principal facilitators, the process, and the relationships among various facilitators in selecting, designing, opening and administrating MOOCs classes. Researches on…

  3. Petroleum and the Environment: Teaching about Petroleum and the Future of Energy Resources

    ERIC Educational Resources Information Center

    Hudson, Travis; Camphire, Geoffrey

    2005-01-01

    Students live in a world that is powered by petroleum and other energy resources to an unsurpassed degree. The United States today consumes more than 24% of all the energy used in the world--and about 60% of this energy is provided by petroleum (oil and natural gas). The availability of abundant, inexpensive energy is the main reason that the…

  4. [The application of genetic engineering to the petroleum biodesulfurization].

    PubMed

    Tong, M Y; Fang, X C; Ma, T; Zhang, Q

    2001-11-01

    The developed course and reaction mechanisms of petroleum biodesulfurization were introduced. The recent development of genetic engineering technology, which used in desulfuration strain's construction, reconstruction and other fields, was summarized emphatically. Its current research situation internal and overseas and the developing prospect were simply analyzed, and our research designs were submitted.

  5. Integrating ergonomics in design processes: a case study within an engineering consultancy firm.

    PubMed

    Sørensen, Lene Bjerg; Broberg, Ole

    2012-01-01

    This paper reports on a case study within an engineering consultancy firm, where engineering designers and ergonomists were working together on the design of a new hospital sterile processing plant. The objective of the paper is to gain a better understanding of the premises for integrating ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics into design processes is presented along with the model.

  6. Sustainable Design Approach: A case study of BIM use

    NASA Astrophysics Data System (ADS)

    Abdelhameed, Wael

    2017-11-01

    alternative's consequences. The architect would settle down and proceed in the alternative design of the best sustainable analysis. In later design stages, using the sustainable types of materials such as insulation, cladding, etc., and applying sustainable building components such as doors, windows, etc. would add more improvements and enhancements in reaching better values and metrics. The paper describes the methodology of this design approach through BIM strategies adopted in design creation. Case studies of architectural designs are used to highlight the details and benefits of this proposed approach.

  7. Publishing Single-Case Research Design Studies That Do Not Demonstrate Experimental Control

    ERIC Educational Resources Information Center

    Tincani, Matt; Travers, Jason

    2018-01-01

    Demonstration of experimental control is considered a hallmark of high-quality single-case research design (SCRD). Studies that fail to demonstrate experimental control may not be published because researchers are unwilling to submit these papers for publication and journals are unlikely to publish negative results (i.e., the file drawer effect).…

  8. Petroleum marketing annual 1993

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleummore » Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates.« less

  9. Analysis of the Control Factors of Groundwater Petroleum Hydrocarbons Contamination in a City’s West Part

    NASA Astrophysics Data System (ADS)

    Sun, L. H.; Ma, Z. M.; Liu, Z. W.

    2018-05-01

    Based on study of the hydrogeological condition and the characteristics of petroleum hydrocarbons pollution in karst groundwater, an oil refinery located in western part of a certain city is chosen as the study site to have an analysis on the control factors of groundwater petroleum hydrocarbons contamination. The study result shows that the control factors of groundwater petroleum hydrocarbons contamination are hydrogeological condition and biodegradation. The soil layer of Quaternary is very thin, the limestone is exposed in the surface, which makes the petroleum hydrocarbons easy to permeate into the water bearing layer. Karst-fractured zone in aquifer determines the migration way of petroleum hydrocarbons to be convection, but the magmatic rock in northern part has certain blocking effect on the migration of petroleum hydrocarbons. Biodegradation makes both the contamination plume area of petroleum hydrocarbons and the content of petroleum hydrocarbons decreased.

  10. Petroleum: An energy profile. [CONTAINS GLOSSARY

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-08-01

    This publication is intended as a general reference about petroleum: its origins, production, refining, marketing, and use. This report presents an overview of refined petroleum products and their use, crude oil reserves and production, refining technology and US refining capacity, the development and operation of petroleum markets, and foreign trade. A statistical supplement, an appendix describing refining operations, a glossary, and bibliographic references for additional sources of information are also included. 36 figs., 4 tabs.

  11. Bioremediation of petroleum-contaminated soil using aged refuse from landfills.

    PubMed

    Liu, Qingmei; Li, Qibin; Wang, Ning; Liu, Dan; Zan, Li; Chang, Le; Gou, Xuemei; Wang, Peijin

    2018-05-10

    This study explored the effects and mechanisms of petroleum-contaminated soil bioremediation using aged refuse (AR) from landfills. Three treatments of petroleum-contaminated soil (47.28 mg·g -1 ) amended with AR, sterilized aged refuse (SAR) and petroleum-contaminated soil only (as a control) were tested. During 98 days of incubation, changes in soil physicochemical properties, residual total petroleum hydrocarbon (TPH), biodegradation kinetics, enzyme activities and the microbial community were investigated. The results demonstrated that AR was an effective soil conditioner and biostimulation agent that could comprehensively improve the quality of petroleum-contaminated soil and promote microbial growth, with an 74.64% TPH removal rate, 22.36 day half-life for SAR treatment, compared with the control (half-life: 138.63 days; TPH removal rate: 22.40%). In addition, the petroleum-degrading bacteria isolation results demonstrated that AR was also a petroleum-degrading microbial agent containing abundant microorganisms. AR addition significantly improved both the biotic and abiotic conditions of petroleum-contaminated soil without other additives. The cooperation of conditioner addition, biostimulation and bioaugmentation in AR treatment led to better bioremediation effects (half-life: 13.86 days; TPH removal rate: 89.83%). In conclusion, AR amendment is a cost-effective, easy-to-use method facilitating in situ large-scale application while simultaneously recycling huge amounts of AR from landfills. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. 49 CFR 192.11 - Petroleum gas systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Petroleum gas systems. 192.11 Section 192.11... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General § 192.11 Petroleum gas systems. (a) Each plant that supplies petroleum gas by pipeline to a natural gas distribution system must meet the requirements...

  13. 49 CFR 192.11 - Petroleum gas systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Petroleum gas systems. 192.11 Section 192.11... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS General § 192.11 Petroleum gas systems. (a) Each plant that supplies petroleum gas by pipeline to a natural gas distribution system must meet the requirements...

  14. Petroleum marketing monthly with data for May 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures themore » accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.« less

  15. A user-centred design process of new cold-protective clothing for offshore petroleum workers operating in the Barents Sea

    PubMed Central

    NAESGAARD, Ole Petter; STORHOLMEN, Tore Christian Bjørsvik; WIGGEN, Øystein Nordrum; REITAN, Jarl

    2017-01-01

    Petroleum operations in the Barents Sea require personal protective clothing (PPC) to ensure the safety and performance of the workers. This paper describes the accomplishment of a user-centred design process of new PPC for offshore workers operating in this area. The user-centred design process was accomplished by mixed-methods. Insights into user needs and context of use were established by group interviews and on-the-job observations during a field-trip. The design was developed based on these insights, and refined by user feedback and participatory design. The new PPC was evaluated via field-tests and cold climate chamber tests. The insight into user needs and context of use provided useful input to the design process and contributed to tailored solutions. Providing users with clothing prototypes facilitated participatory design and iterations of design refinement. The group interviews following the final field test showed consensus of enhanced user satisfaction compared to PPC in current use. The final cold chamber test indicated that the new PPC provides sufficient thermal protection during the 60 min of simulated work in a wind-chill temperature of −25°C. Conclusion: Accomplishing a user-centred design process contributed to new PPC with enhanced user satisfaction and included relevant functional solutions. PMID:29046494

  16. A user-centred design process of new cold-protective clothing for offshore petroleum workers operating in the Barents Sea.

    PubMed

    Naesgaard, Ole Petter; Storholmen, Tore Christian Bjørsvik; Wiggen, Øystein Nordrum; Reitan, Jarl

    2017-12-07

    Petroleum operations in the Barents Sea require personal protective clothing (PPC) to ensure the safety and performance of the workers. This paper describes the accomplishment of a user-centred design process of new PPC for offshore workers operating in this area. The user-centred design process was accomplished by mixed-methods. Insights into user needs and context of use were established by group interviews and on-the-job observations during a field-trip. The design was developed based on these insights, and refined by user feedback and participatory design. The new PPC was evaluated via field-tests and cold climate chamber tests. The insight into user needs and context of use provided useful input to the design process and contributed to tailored solutions. Providing users with clothing prototypes facilitated participatory design and iterations of design refinement. The group interviews following the final field test showed consensus of enhanced user satisfaction compared to PPC in current use. The final cold chamber test indicated that the new PPC provides sufficient thermal protection during the 60 min of simulated work in a wind-chill temperature of -25°C. Accomplishing a user-centred design process contributed to new PPC with enhanced user satisfaction and included relevant functional solutions.

  17. Completion Design Considerations for a Horizontal Enhanced Geothermal System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olson, Jeffrey; Eustes, Alfred; Fleckenstein, William

    2015-09-02

    The petroleum industry has had considerable success in recent decades in developing unconventional shale plays using horizontal drilling and multi-zonal isolation and stimulation techniques to fracture tight formations to enable the commercial production of oil and gas. Similar well completions could be used in Enhanced Geothermal Systems (EGS) to create multiple fractures from horizontal wells. This study assesses whether well completion techniques used in the unconventional shale industry to create multi-stage fractures can be applied to an enhanced geothermal system, with a focus on the completion of the EGS injection well. This study assumes an Enhanced Geothermal System (EGS) consistingmore » of a central horizontal injection well flanked on each side by horizontal production wells, connected to the injection well by multiple fractures. The focus is on the design and completion of the horizontal well. For the purpose of developing design criteria, a reservoir temperature of 200 degrees C (392 degrees F) and an injection well flow rate of 87,000 barrels per day (160 kg/s), corresponding to production well flow rates of 43,500 barrels per day (80 kg/s) is assumed. The analysis found that 9-5/8 inches 53.5 pounds per foot (ppf) P110 casing string with premium connections meets all design criteria for the horizontal section of injection well. A P110 grade is fairly common and is often used in horizontal sections of shale development wells in petroleum operations. Next, several zonal isolation systems commonly used in the shale gas industry were evaluated. Three techniques were evaluated -- a 'plug and perf' design, a 'sand and perf' design, and a 'packer and port' design. A plug and perf system utilizes a cemented casing throughout the length of the injector wellbore. The sand and perf system is identical to the plug and perf system, but replaces packers with sand placed in the casing after stimulation to screen out the stimulated perforated zones and provide

  18. Petroleum resource potential GIS of northern Afghanistan

    USGS Publications Warehouse

    Steinshouer, Douglas W.; Klett, Timothy R.; Ulmishek, Gregory F.; Wandrey, Craig J.; Wahl, Ronald R.; Hill, Ronald J.; Pribil, Michael J.; Pawlewicz, Mark J.; King, J. David; Agena, Warren F.; Taylor, David J.; Amirzada, Abdulla; Selab, Amir Mohammad; Mutteh, Abdul-Salam; Haidari, Ghulam Naqshband; Wardak, Moeengul Gullabudeen

    2006-01-01

    The CD-ROM contains an ESRI ArcReader format GIS project presenting the results of a petroleum resource assessment of Northern Afghanistan, and other data used in the petroleum assessment. Geologic, structural, field, well, political, and other GIS layers covering Afghanistan, Northern Afghanistan and adjacent areas, along with associated geochemical and other data tables pertinent to a petroleum assessment are included. The purpose of this GIS is to provide the basic data layers and tables required to support the petroleum assessment, data for further exploration and development, and an index of known data.

  19. Designing Optical Spreadsheets-Technological Pedagogical Content Knowledge Simulation (S-TPACK): A Case Study of Pre-Service Teachers Course

    ERIC Educational Resources Information Center

    Thohir, M. Anas

    2018-01-01

    In the 21st century, the competence of instructional technological design is important for pre-service physics teachers. This case study described the pre-service physics teachers' design of optical spreadsheet simulation and evaluated teaching and learning the task in the classroom. The case study chose three of thirty pre-service teacher's…

  20. Unit: Petroleum, Inspection Pack, National Trial Print.

    ERIC Educational Resources Information Center

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of a unit on petroleum developed for the Australian Science Education Project. The package contains the teacher's edition of the written material and a script for a film entitled "The Extraordinary Experience of Nicholas Nodwell" emphasizing the uses of petroleum and petroleum products in daily life and…

  1. Job Prospects for Petroleum Engineers.

    ERIC Educational Resources Information Center

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  2. Process for removing halogenated aliphatic and aromatic compounds from petroleum products

    DOEpatents

    Googin, J.M.; Napier, J.M.; Travaglini, M.A.

    1983-09-20

    A process is described for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 1 fig.

  3. Model-It: A Case Study of Learner-Centered Software Design for Supporting Model Building.

    ERIC Educational Resources Information Center

    Jackson, Shari L.; Stratford, Steven J.; Krajcik, Joseph S.; Soloway, Elliot

    Learner-centered software design (LCSD) guides the design of tasks, tools, and interfaces in order to support the unique needs of learners: growth, diversity and motivation. This paper presents a framework for LCSD and describes a case study of its application to the ScienceWare Model-It, a learner-centered tool to support scientific modeling and…

  4. Petroleum and mineral resources of Antarctica

    USGS Publications Warehouse

    Kovar, Karel; Behrendt, John Charles

    1983-01-01

    No known petroleum or mineral resources occur in Antarctica. The data on these subjects have been collected, mainly since the IGY (International Geophysical Year), 1957-58, as a part of other research carried out by geologists and geophysicists from a number of countries. Specific resource-related studies have not been made. Wright and Williams (1974) summarized what was known of Antarctic mineral resources a decade ago.The U.S. Geological Survey has been actively pursuing various investigations in Antarctica since 194 7. In the course of this work and that of our colleagues elsewhere in the United States and in other countries, much information relevant to petroleum and mineral resources has been obtained. Since 1976, modern state-of-the-art multichannel seismic reflection and aeromagnetic surveys by several countries over the continental margin of Antarctica have indicated thick sedimentary basins. However, no offshore drilling beneath the continental shelf has taken place since the DSDP (Deep Sea Drilling Project) holes in the Ross Sea in 1973. Geologic field investigations begun at the turn of the twentieth century have been intensified in the past two decades; most rock outcrops have been visited and samples collected. Technology to exploit resources, particularly in the Arctic, has been developing at a rapid rate, and much of it could be applied to Antarctica. As a result of the petroleum price increases of the past decade, the attention of a number of countries has turned to Antarctica, but under the policy of "voluntary restraint" adopted by the Antarctic Treaty nations, no active petroleum or mineral exploration is taking place. The Antarctic treaty countries are in the process of negotiating an Antarctic mineral resources regime that is anticipated to be completed within the next several years. Therefore it seemed timely to us to readdress the question of petroleum and mineral resources. These reports review and summarize the available information. The

  5. High resolution study of petroleum source rock variation, Lower Cretaceous (Hauterivian and Barremian) of Mikkelsen Bay, North Slope, Alaska

    USGS Publications Warehouse

    Keller, Margaret A.; Macquaker, Joe H.S.; Lillis, Paul G.

    2001-01-01

    Open File Report 01-480 was designed as a large format poster for the Annual Meeting of the American Association of Petroleum Geologists and the Society for Sedimentary Geology in Denver Colorado in June 2001. It is reproduced here in digital format to make widely available some unique images of mudstones. The images include description, interpretation, and Rock-Eval data that resulted from a high-resolution study of petroleum source rock variation of the Lower Cretaceous succession of the Mobil-Phillips Mikkelsen Bay State #1 well on the North Slope of Alaska. Our mudstone samples with Rock-Eval data plus color images are significant because they come from one of the few continuously cored and complete intervals of the Lower Cretaceous succession on the North Slope. This succession, which is rarely preserved in outcrop and very rarely cored in the subsurface, is considered to include important petroleum source rocks that have not previously been described nor explained Another reason these images are unique is that the lithofacies variability within mudstone dominated successions is relatively poorly known in comparison with that observed in coarser clastic and carbonate successions. They are also among the first published scans of thin sections of mudstone, and are of excellent quality because the sections are well made, cut perpendicular to bedding, and unusually thin, 20 microns. For each of 15 samples, we show a thin section scan (cm scale) and an optical photomicrograph (mm scale) that illustrates the variability present. Several backscattered SEM images are also shown. Rock-Eval data for the samples can be compared with the textures and mineralogy present by correlating sample numbers and core depth.

  6. Testing the effectiveness of family therapeutic assessment: a case study using a time-series design.

    PubMed

    Smith, Justin D; Wolf, Nicole J; Handler, Leonard; Nash, Michael R

    2009-11-01

    We describe a family Therapeutic Assessment (TA) case study employing 2 assessors, 2 assessment rooms, and a video link. In the study, we employed a daily measures time-series design with a pretreatment baseline and follow-up period to examine the family TA treatment model. In addition to being an illustrative addition to a number of clinical reports suggesting the efficacy of family TA, this study is the first to apply a case-based time-series design to test whether family TA leads to clinical improvement and also illustrates when that improvement occurs. Results support the trajectory of change proposed by Finn (2007), the TA model's creator, who posits that benefits continue beyond the formal treatment itself.

  7. Comparative dermal carcinogenesis of shale and petroleum-derived distillates.

    PubMed

    Clark, C R; Walter, M K; Ferguson, P W; Katchen, M

    1988-03-01

    Ten test materials derived from petroleum or hydrotreated shale oils were applied 3 times/week for up to 105 weeks to the shaved skin of 25 male and 25 female C3H/HeN mice per group. Mineral oil and benzo(a) pyrene (0.15%) were control materials. Clinical observations were recorded during the study. At death, histopathologic examination was conducted on skin, internal organs and any gross lesions. Exposures to some materials were ended midway in the study due to severe irritation. Chronic toxicity of all materials was limited to inflammatory and degenerative skin changes. Significant increases over control incidence of skin tumors (squamous cell carcinoma and fibrosarcoma) occurred with both petroleum and shale-derived naphtha (21%, 50%), Jet A (26%, 28%), JP-4 (26%, 50%), and crude oils (84%, 54%). Severely hydrotreated shale oil and petroleum and shale-derived diesel distillates were not considered tumorigenic. Results indicate that toxicity of comparable petroleum and shale-derived fractions was qualitatively similar and confirm earlier findings that hydrotreating reduces or eliminates carcinogenicity of raw shale oil.

  8. Community dynamics of anaerobic bacteria in deep petroleum reservoirs

    NASA Astrophysics Data System (ADS)

    Hallmann, Christian; Schwark, Lorenz; Grice, Kliti

    2008-09-01

    The nature, activity and metabolism of microbes that inhabit the deep subsurface environment are a matter of ongoing debate. Primarily limited by temperature, little is known about secondary factors that restrict or enhance microbial activity or about the extent of a habitable environment deep below the surface. In particular, the degraders of chemically inert organic substrates remain elusive. Petroleum reservoirs can be regarded as natural bioreactors and are ideally suited for the study of microbial metabolism in the deep subsurface. Here we analyse series of oil samples that were biodegraded to different degrees. We find fatty acids after hydrolysis of purified crude oil fractions, indicating the presence of intact phospholipids and suggesting that indigenous bacteria inhabit petroleum reservoirs in sediment depths of up to 2,000m. A major change in bacterial community structure occurs after the removal of n-alkanes, indicating that more than one consortium is responsible for petroleum degradation. Our results suggest that further study of petroleum fluids will help understand bacterial metabolism and diversity in this habitat of the deep subsurface.

  9. What drives petroleum product prices

    EIA Publications

    2017-01-01

    This new section discusses the various factors that influence the prices of gasoline and distillate fuel oil—the two most-consumed petroleum products in the United States. Charts detailing prices, consumption, production, inventories, and trade for both petroleum products will be updated each month in the Short-Term Energy Outlook.

  10. The importance of user centered design methods applied to the design of a new workstation: a case study.

    PubMed

    Duschenes, Ronaldo; Mendes, Andressa; Betiol, Adriana; Barreto, Suzana

    2012-01-01

    This paper presents a case study of the application of user centered design methodologies in the product development for a line of ergonomic office furniture. The study aimed to analyze the experience of using a workstation from the perspective of two groups of users, installers and end users. The observation of users in their natural context of use not only allowed the development team to identify key needs and strategies of the users, transforming them into design solutions, but mainly it warned them of the importance and impact of user involvement in the product development cycle.

  11. Energy and public health: the challenge of peak petroleum.

    PubMed

    Frumkin, Howard; Hess, Jeremy; Vindigni, Stephen

    2009-01-01

    Petroleum is a unique and essential energy source, used as the principal fuel for transportation, in producing many chemicals, and for numerous other purposes. Global petroleum production is expected to reach a maximum in the near future and to decline thereafter, a phenomenon known as "peak petroleum." This article reviews petroleum geology and uses, describes the phenomenon of peak petroleum, and reviews the scientific literature on the timing of this transition. It then discusses how peak petroleum may affect public health and health care, by reference to four areas: medical supplies and equipment, transportation, energy generation, and food production. Finally, it suggests strategies for anticipating and preparing for peak petroleum, both general public health preparedness strategies and actions specific to the four expected health system impacts.

  12. 29 CFR 794.132 - “Petroleum products”.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false âPetroleum productsâ. 794.132 Section 794.132 Labor... WHOLESALE OR BULK PETROLEUM DISTRIBUTORS UNDER SECTION 7(b)(3) OF THE FAIR LABOR STANDARDS ACT Exemption... § 794.132 “Petroleum products”. A sale by an enterprise engaged in the wholesale or bulk distribution of...

  13. 29 CFR 794.132 - “Petroleum products”.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... § 794.132 “Petroleum products”. A sale by an enterprise engaged in the wholesale or bulk distribution of petroleum products will be included in the 25 percent limitation under the exemption only if it is made to a customer who engages in the distribution, in bulk and for resale, of “petroleum products”. The term...

  14. VOCs emission rate estimate for complicated industrial area source using an inverse-dispersion calculation method: A case study on a petroleum refinery in Northern China.

    PubMed

    Wei, Wei; Lv, Zhaofeng; Yang, Gan; Cheng, Shuiyuan; Li, Yue; Wang, Litao

    2016-11-01

    This study aimed to apply an inverse-dispersion calculation method (IDM) to estimate the emission rate of volatile organic compounds (VOCs) for the complicated industrial area sources, through a case study on a petroleum refinery in Northern China. The IDM was composed of on-site monitoring of ambient VOCs concentrations and meteorological parameters around the source, calculation of the relationship coefficient γ between the source's emission rate and the ambient VOCs concentration by the ISC3 model, and estimation of the actual VOCs emission rate from the source. Targeting the studied refinery, 10 tests and 8 tests were respectively conducted in March and in June of 2014. The monitoring showed large differences in VOCs concentrations between background and downwind receptors, reaching 59.7 ppbv in March and 248.6 ppbv in June, on average. The VOCs increases at receptors mainly consisted of ethane (3.1%-22.6%), propane (3.8%-11.3%), isobutane (8.5%-10.2%), n-butane (9.9%-13.2%), isopentane (6.1%-12.9%), n-pentane (5.1%-9.7%), propylene (6.1-11.1%) and 1-butylene (1.6%-5.4%). The chemical composition of the VOCs increases in this field monitoring was similar to that of VOCs emissions from China's refineries reported, which revealed that the ambient VOCs increases were predominantly contributed by this refinery. So, we used the ISC3 model to create the relationship coefficient γ for each receptor of each test. In result, the monthly VOCs emissions from this refinery were calculated to be 183.5 ± 89.0 ton in March and 538.3 ± 281.0 ton in June. The estimate in June was greatly higher than in March, chiefly because the higher environmental temperature in summer produced more VOCs emissions from evaporation and fugitive process of the refinery. Finally, the VOCs emission factors (g VOCs/kg crude oil refined) of 0.73 ± 0.34 (in March) and 2.15 ± 1.12 (in June) were deduced for this refinery, being in the same order with previous direct

  15. 10 CFR 474.3 - Petroleum-equivalent fuel economy calculation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Petroleum-equivalent fuel economy calculation. 474.3..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.3 Petroleum-equivalent fuel economy calculation. (a) The petroleum-equivalent fuel economy for an electric vehicle is...

  16. 10 CFR 474.3 - Petroleum-equivalent fuel economy calculation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Petroleum-equivalent fuel economy calculation. 474.3..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.3 Petroleum-equivalent fuel economy calculation. (a) The petroleum-equivalent fuel economy for an electric vehicle is...

  17. 10 CFR 474.3 - Petroleum-equivalent fuel economy calculation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Petroleum-equivalent fuel economy calculation. 474.3..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.3 Petroleum-equivalent fuel economy calculation. (a) The petroleum-equivalent fuel economy for an electric vehicle is...

  18. 10 CFR 474.3 - Petroleum-equivalent fuel economy calculation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Petroleum-equivalent fuel economy calculation. 474.3..., DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.3 Petroleum-equivalent fuel economy calculation. (a) The petroleum-equivalent fuel economy for an electric vehicle is...

  19. Reservoir analog studies using multimodel photogrammetry: A new tool for the petroleum industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dueholm, K.S.; Olsen, T.

    1993-12-01

    Attempts to increase the recovery from hydrocarbon reservoirs involve high-precision geological work. Siliciclastic depositional environments must be interpreted accurately and combined with an analysis of the three-dimensional shape of the sand bodies. An advanced photogrammetric method called multimodel stereo restitution is a potential new tool for the petroleum industry when outcrop investigations are necessary, such as in reservoir analog studies. The method is based on very simple field photography techniques, allowing the geologist to use his own standard small-frame camera. It can be applied to geological studies of virtually any scale, and outcrop mapping is significantly improved in detail, accuracy,more » and volume. The method is especially useful when investigating poorly accessible exposures on steep mountain faces and canyon walls. The use of multimodel photogrammetry is illustrated by a study of Upper Cretaceous deltaic sediments from the Atane Formation of West Greenland. Further potential applications of the method in petroleum explorations are discussed. True-scale mapping of lithologies in large continuous exposures can be used in understanding basin evolution and in seismic modeling. Close-range applications can be used when modeling fault geometries, and in studies of individual bed forms, clay laminae, cemented horizons, and diagenetic fronts.« less

  20. Comparative acute toxicity of shale and petroleum derived distillates.

    PubMed

    Clark, C R; Ferguson, P W; Katchen, M A; Dennis, M W; Craig, D K

    1989-12-01

    In anticipation of the commercialization of its shale oil retorting and upgrading process, Unocal Corp. conducted a testing program aimed at better defining potential health impacts of a shale industry. Acute toxicity studies using rats and rabbits compared the effects of naphtha, Jet-A, JP-4, diesel and "residual" distillate fractions of both petroleum derived crude oils and hydrotreated shale oil. No differences in the acute oral (greater than 5 g/kg LD50) and dermal (greater than 2 g/kg LD50) toxicities were noted between the shale and petroleum derived distillates and none of the samples were more than mildly irritating to the eyes. Shale and petroleum products caused similar degrees of mild to moderate skin irritation. None of the materials produced sensitization reactions. The LC50 after acute inhalation exposure to Jet-A, shale naphtha, (greater than 5 mg/L) and JP-4 distillate fractions of petroleum and shale oils was greater than 5 mg/L. The LC50 of petroleum naphtha (greater than 4.8 mg/L) and raw shale oil (greater than 3.95 mg/L) also indicated low toxicity. Results demonstrate that shale oil products are of low acute toxicity, mild to moderately irritating and similar to their petroleum counterparts. The results further demonstrate that hydrotreatment reduces the irritancy of raw shale oil.

  1. Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

    PubMed

    Yekpe, Ketsia; Abatzoglou, Nicolas; Bataille, Bernard; Gosselin, Ryan; Sharkawi, Tahmer; Simard, Jean-Sébastien; Cournoyer, Antoine

    2018-07-01

    This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

  2. Soil contamination by petroleum products. Southern Algerian case

    NASA Astrophysics Data System (ADS)

    Belabbas, Amina; Boutoutaou, Djamel; Segaï, Sofiane; Segni, Ladjel

    2016-07-01

    Contamination of soil by petroleum products is a current problem in several countries in the world. In Algeria, this negative phenomenon is highly remarked in Saharan region. Numerous studies at the University of Ouargla that we will review in this paper, have tried to find an effective solution to eliminate the hydrocarbons from the soil by the technique of "biodegradation" which is a natural process based on microorganisms such as Bacillus megaterium and Pseudomonas aeruginosa. Presence of aboriginal strain Bacillus megaterium in the soil samples with different ages of contamination has shown a strong degradation of pollutants. This strain chosen for its short time of generation which is performing as seen the best yields of elimination of hydrocarbons assessed at 98 % biostimule by biosurfactant, also 98% on a sample wich bioaugmente by urea, and 86 % of the sample which biostimule by nutrient solution. The rate of biodegradation of the contaminated soil by crude oil using the strain Pseudomonas aeruginosa is higher in the presence of biosurfactant 53 % that in his absence 35 %. Another elimination technique wich is washing the contaminated soil's sample by centrifugation in the presence of biosurfactant where The rate of hydrocarbons mobilized after washing soil by centrifugation is of 50 % and 76 % but without centrifugation it was of 46% to 79%. Those processes have great capacity in the remobilization of hydrocarbons and acceleration of their biodegradation; thus, they deserve to be further developed in order to prevent environmental degradation in the region of Ouargla.

  3. Design, methodological issues and participation in a multiple sclerosis case-control study.

    PubMed

    Williamson, D M; Marrie, R A; Ashley-Koch, A; Schiffer, R; Trottier, J; Wagner, L

    2012-09-01

    This study was conducted to determine whether the risk of developing multiple sclerosis (MS) was associated with certain environmental exposures or genetic factors previously reported to influence MS risk. This paper describes the methodological issues, study design and characteristics of the study population. Individuals with definite MS were identified from a prevalence study conducted in three geographic areas. The target number of cases was not reached, so an additional study area was added. Identifying clinic controls was inefficient, so controls were recruited using random digit dialing. All study participants completed a detailed questionnaire regarding environmental exposures using computer-assisted telephone interviewing, and blood was collected for genetic analysis. In total, 276 cases and 590 controls participated, but participation rates were low, ranging from 28.4% to 38.9%. Only one-third (33.6%) of individuals identified in the prevalence study agreed to participate in the case-control study. Cases were more likely to be non-Hispanic white and older than their source populations as identified in the preceding prevalence study (P < 0.05). Most participants provided a blood sample for genotyping (91%; n = 789). Epidemiological studies play a key role in identifying genetic and environmental factors that are associated with complex diseases like MS. Methodological issues arise in every study, and investigators need to be able to detect, respond to and correct problems in a timely and scientifically valid manner. © 2011 John Wiley & Sons A/S.

  4. Marketing and Distributive Education Curriculum Guide in Automotive and Petroleum.

    ERIC Educational Resources Information Center

    Harris, E. Edward; And Others

    This curriculum guide is designed to provide the curriculum coordinator with a basis for planning a comprehensive program in the field of marketing. It also provides marketing and distributive education teachers with maximum flexibility in planning an automotive and petroleum curriculum. The essential common and specialized competencies are…

  5. Applications of aerospace technology to petroleum exploration. Volume 1: Efforts and results

    NASA Technical Reports Server (NTRS)

    Jaffe, L. D.

    1976-01-01

    The feasibility of applying aerospace techniques to help solve significant problems in petroleum exploration is studied. Through contacts with petroleum industry and petroleum service industry, important petroleum exploration problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified where possible. Topics selected for investigation include: seismic reflection systems; down-hole acoustic techniques; identification of geological analogies; drilling methods; remote geological sensing; and sea floor imaging and mapping. Specific areas of aerospace technology are applied to 21 concepts formulated from the topics of concern.

  6. Magnetic susceptibility of petroleum fluids

    NASA Astrophysics Data System (ADS)

    Ivakhnenko, O. P.; Potter, D. K.

    2003-04-01

    Technological progress in petroleum exploration, production and processing requires a profound knowledge of the magnetic properties of the petroleum fluids. However, as far as we know there are not widely available constants of magnetic susceptibility for the majority of petroleum fluids. We have therefore measured the mass magnetic susceptibility (χ_m) of several petroleum fluids (such as crude oils, refined oil fractions, and formation waters) from local and worldwide sites. The magnetic features of natural reservoir petroleum fluids, together with fluids connected with the petroleum industry (such as drilling fluids etc.), fall into the following categories: diamagnetic solutions, paramagnetic suspensions and ferromagnetic "ferrofluid" suspensions. In the current investigations we have concentrated on the natural reservoir fluids, which are generally diamagnetic. There were distinct differences between the χ_m of the crude oils and the formation waters, with the oils having generally a more negative value of χ_m. The magnetic susceptibility of the oils appears to be related to their main physical and chemical properties, such as density, composition of group hydrocarbons, sulphur content and concentration of organometallic compounds. Low acidity and low sulphur oils have more negative values of χ_m. Light fractions of crude oil consisting mainly of paraffinic and naphtenic hydrocarbons are the most diamagnetic. The content of the less diamagnetic aromatics increases in the kerosene and gas oil fractions, and results in an increase in the magnetic susceptibility. Also, the magnetic susceptibility of the heavy oil fraction has a significantly higher χ_m than the light fractions, which appears to be connected with a higher concentration of paramagnetic components in the heavy fraction. The χ_m of the oil from various oil provinces were compared and found to be different. It seems that values of χ_m reflect specific features of the geological conditions for

  7. Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

    ERIC Educational Resources Information Center

    Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

    2016-01-01

    Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

  8. Point-of-entry treatment of petroleum contaminated water supplies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malley, J.P. Jr.; Eliason, P.A.; Wagler, J.L.

    1993-03-01

    Contamination of individual wells in rural area from leaking petroleum storage tanks poses unique problems for regulatory agencies utilities, and potentially responsible parties. A potential solution is the use of point-of-entry (POE) treatment techniques. Results indicate POE systems using aeration followed by granular activated carbon (GAC) are a viable, cost effective, short-term solution while ground water remediation is performed or an alternate drinking water supply is secured. Selection and design of POE systems should consider variations in water usage and contaminant concentrations. Iron and manganese did not affect POE system performance at the ten sites studied. However, iron precipitation wasmore » observed and may pose problems in some POE applications. Increased concentrations of nonpurgeable dissolved organic carbon consisting primarily of methy-t-butyl ether (MTBE) and hydrophilic petroleum hydrocarbons were found in the raw waters but did not affect volatile organic chemical (VOC) removals by aeration of GAC. Microbial activity as measured by heterotrophie plate count significantly increased through four of the ten POE systems studied. Reliability of the POE systems will best be achieved by specifying top quality system components, educating POE users, and providing routine maintenance and VOC monitoring. 20 refs., 9 figs., 4 tabs.« less

  9. Novel nanoporous sorbent for solid-phase extraction in petroleum fingerprinting

    NASA Astrophysics Data System (ADS)

    Alayande, S. Oluwagbemiga; Hlengilizwe, Nyoni; Dare, E. Olugbenga; Msagati, Titus A. M.; Akinlabi, A. Kehinde; Aiyedun, P. O.

    2016-04-01

    Sample preparation is crucial in the analysis of petroleum and its derivatives. In this study, developing affordable sorbent for petroleum fingerprinting analysis using polymer waste such expanded polystyrene was explored. The potential of electrospun expanded polystyrene (EPS) as a sorbent for the solid-phase extraction (SPE) technique was investigated, and its efficiency was compared with commercial cartridges such as alumina, silica and alumina/silica hybrid commercial for petroleum fingerprinting analysis. The chromatograms showed that the packed electrospun EPS fibre demonstrated excellent properties for SPE applications relative to the hybrid cartridges.

  10. Petroleum hydrocarbon toxicity to corals: A review.

    PubMed

    Turner, Nicholas R; Renegar, D Abigail

    2017-06-30

    The proximity of coral reefs to coastal urban areas and shipping lanes predisposes corals to petroleum pollution from multiple sources. Previous research has evaluated petroleum toxicity to coral using a variety of methodology, including monitoring effects of acute and chronic spills, in situ exposures, and ex situ exposures with both adult and larval stage corals. Variability in toxicant, bioassay conditions, species and other methodological disparities between studies prevents comprehensive conclusions regarding the toxicity of hydrocarbons to corals. Following standardized protocols and quantifying the concentration and composition of toxicant will aid in comparison of results between studies and extrapolation to actual spills. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Oil Federalism In Iraq: Resource Curse, Patronage Networks and Stability. Case Studies of Baghdad, Kurdistan and the Advent of ISIS

    NASA Astrophysics Data System (ADS)

    Wahab, Bilal A.

    Petroleum wealth is the lifeblood of Iraq, with the potential to promote prosperity, or become a curse that destabilizes the country and interrupts its economic and political development. The management and sharing of petroleum wealth has been at the center of economic, political and security developments in Iraq since the country's invasion in 2003. This study analyzes Iraq's experiment with petrofederalism, the influence of different actors (e.g. international oil companies and ISIS), and the emergence of Iraqi Kurdistan as a petroregion. Using case study method, it demonstrates how patronage politics exacerbated resource curse in Iraq and resulted in instability.

  12. Recent advances in petroleum microbiology.

    PubMed

    Van Hamme, Jonathan D; Singh, Ajay; Ward, Owen P

    2003-12-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and

  13. Recent Advances in Petroleum Microbiology

    PubMed Central

    Van Hamme, Jonathan D.; Singh, Ajay; Ward, Owen P.

    2003-01-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and

  14. Gravimetric effects of petroleum accumulations--A preliminary summary

    USGS Publications Warehouse

    McCulloh, Thane Hubert

    1966-01-01

    Negative gravity anomalies of very local extent and with amplitudes of 1.2 milligals or less have been observed over some known petroleum and natural gas fields in southern California and South Dagestan, U.S.S.R. Field evidence, laboratory measurements, and theory indicate that these anomalies are mainly the result of hydrocarbon pore fluids of densities significantly lower than that of water. Gravity meters already available have the precision necessary to detect some of these anomalies from surface measurements. In addition, a high-precision borehole gravity meter has been developed, by the industrial firm of LaCoste and Romberg, Inc., that can be used in wells with a casing 7 inches or more in diameter and at temperatures below 100?C. Field tests indicate that the prototype attains a precision in wells of ? 0.015 milligal for a single measurement. These observations and the new gravimeter should aid in the search for new petroleum fields and for new reservoirs in known fields that are incompletely explored.

  15. Application of Advanced Materials in Petroleum Engineering

    NASA Astrophysics Data System (ADS)

    Zhao, Gufan; Di, Weina; Wang, Minsheng

    With the background of increasing requirements on the petroleum engineering technology from more high demanding exploration targets, global oil companies and oil service companies are making more efforts on both R&D and application of new petroleum engineering technology. Advanced materials always have a decisive role in the functionality of a new product. Technology transplantation has become the important means of innovation in oil and gas industry. Here, we mainly discuss the properties and scope of application of several advanced materials. Based on the material requirements in petroleum engineering, we provide several candidates for downhole electronics protection, drilling fluid additives, downhole tools, etc. Based on the analysis of petroleum engineering technology characteristics, this paper made analysis and research on such advanced materials as new insulation materials, functional gradient materials, self-healing polymers, and introduced their application prospect in petroleum engineering in terms of specific characteristics.

  16. Considerations of study design.

    PubMed

    Koretz, Ronald L

    2007-12-01

    Research projects attempt to answer specific questions. The particular study design that is selected will depend in large measure on the nature of the question and the time and resources available. There are 5 common categories of clinical questions; they relate to etiology, prognosis, utility of diagnostic tests, efficacy of proposed interventions, and cost of treatment in specific disease states. A number of study designs can be used. Case reports serve to memorialize unusual or novel aspects of diseases. Retrospective case series are useful for defining natural history. Case-control studies are used by epidemiologists to elucidate potential etiologies of diseases. Prospective cohort studies can be used to assess natural history or to assess potential disease etiologies. Controlled trials are designed to assess the efficacy of therapeutic interventions. Studies that define the sensitivity and specificity of diagnostic tests can be used to assess the utility of those tests. Economic analyses estimate the costs that particular diseases or therapies will require. Each of these study designs has limitations; with the exception of high-quality randomized trials, none of these study designs can establish a causative relationship between putative etiologic (or therapeutic) factors and disease (outcomes).

  17. Design Guidelines for Bus Transit Systems Using Liquefied Petroleum Gas (LPG) as an Alternative Fuel.

    DOT National Transportation Integrated Search

    1996-09-01

    The use of alternative fuels to power transit buses is steadily increasing. Several fuels, including Liquefied Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Methanol/Ethanol, are already being used in buses. At present, there do not exist co...

  18. JEDI Petroleum Model | Jobs and Economic Development Impact Models | NREL

    Science.gov Websites

    Petroleum Model JEDI Petroleum Model The Jobs and Economic Development Impacts (JEDI) Petroleum Model allows users to estimate economic development impacts from petroleum projects and includes default

  19. Petroleum marketing monthly, February 1999 with data for November 1998

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1999-02-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products aremore » presented in the Petroleum Marketing Monthly in six sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.« less

  20. Petroleum marketing monthly, March 1999 with data for December 1998

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1999-03-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products aremore » presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.« less

  1. [Analysis of fluorescence spectrum of petroleum-polluted water].

    PubMed

    Huang, Miao-Fen; Song, Qing-Jun; Xing, Xu-Feng; Jian, Wei-Jun; Liu, Yuan; Zhao, Zu-Long

    2014-09-01

    In four ratio experiments, natural waters, sampled from the mountain reservoir and the sea water around Dalian city, were mixed with the sewage from petroleum refinery and petroleum exploitation plants. The fluorescence spectra of water samples containing only chromophoric dissolved organic matters(CDOM), samples containing only petroleum, and samples containing a mixture of petroleum and CDOM were analyzed, respectively. The purpose of this analysis is to provide a basis for determining the contribution of petroleum substances and CDOM to the total absorption coefficient of the petroleum-contaminated water by using fluorescence technique. The results showed that firstly, CDOM in seawater had three main fluorescence peaks at Ex: 225-230 nm/Em: 320-330 nm, Ex: 280 nm/Em: 340 nm and Ex: 225-240 nm/Em: 430-470 nm, respectively, and these may arise from the oceanic chlorophyll. CDOM in natural reservoir water had two main fluorescence peaks at EX: 240- 260 nm/Em: 420-450 nm and Ex: 310~350 nm/Em: 420--440 nm, respectively, and these may arise from the terrestrial sources; secondly, the water samples containing only petroleum extracted with n-hexane had one to three fluorescence spectral peaksat Ex: 220-240 nm/Em: 320-340 nm, Ex: 270-290 nm/Em: 310-340 nm and Ex: 220-235 nm/Em: 280-310 nm, respectively, caused by their hydrocarbon component; finally, the water samples containing both petroleum and CDOM showed a very strong fluorescence peak at Ex: 230-250 nm/Em: 320-370 nm, caused by the combined effect of CDOM and petroleum hydrocarbons.

  2. Short-Term Energy Outlook Model Documentation: Petroleum Products Supply Module

    EIA Publications

    2013-01-01

    The Petroleum Products Supply Module of the Short-Term Energy Outlook (STEO) model provides forecasts of petroleum refinery inputs (crude oil, unfinished oils, pentanes plus, liquefied petroleum gas, motor gasoline blending components, and aviation gasoline blending components) and refinery outputs (motor gasoline, jet fuel, distillate fuel, residual fuel, liquefied petroleum gas, and other petroleum products).

  3. Response rates in case-control studies of cancer by era of fieldwork and by characteristics of study design.

    PubMed

    Xu, Mengting; Richardson, Lesley; Campbell, Sally; Pintos, Javier; Siemiatycki, Jack

    2018-04-09

    The purpose of this study was to describe time trends in response rates in case-control studies of cancer and identify study design factors that influence response rate. We reviewed 370 case-control studies of cancer published in 12 journals during indicator years in each of the last four decades. We estimated time trends of response rates and reasons for nonresponse in each of the following types of study subjects: cases, medical source controls, and population controls. We also estimated response rates according to characteristics of study context. Median response rates among cases and population controls were between 75% and 80% in the 1970s. Between 1971 and 2010, study response rates declined by 0.31% per year for cases and 0.78% for population controls. Only a minority of studies reported reasons for nonparticipation; subject refusal was the most common reported reason. Studies conducted in North America had lower median response rates than studies conducted in Europe. In-person and telephone interviews elicited higher response rates than mail questionnaires. Response rates from case-control studies of cancer have declined, and this could threaten the validity of results derived from these studies. Copyright © 2018 Elsevier Inc. All rights reserved.

  4. A Database Design and Development Case: NanoTEK Networks

    ERIC Educational Resources Information Center

    Ballenger, Robert M.

    2010-01-01

    This case provides a real-world project-oriented case study for students enrolled in a management information systems, database management, or systems analysis and design course in which database design and development are taught. The case consists of a business scenario to provide background information and details of the unique operating…

  5. Petroleum system modeling of the western Canada sedimentary basin - isopach grid files

    USGS Publications Warehouse

    Higley, Debra K.; Henry, Mitchell E.; Roberts, Laura N.R.

    2005-01-01

    This publication contains zmap-format grid files of isopach intervals that represent strata associated with Devonian to Holocene petroleum systems of the Western Canada Sedimentary Basin (WCSB) of Alberta, British Columbia, and Saskatchewan, Canada. Also included is one grid file that represents elevations relative to sea level of the top of the Lower Cretaceous Mannville Group. Vertical and lateral scales are in meters. The age range represented by the stratigraphic intervals comprising the grid files is 373 million years ago (Ma) to present day. File names, age ranges, formation intervals, and primary petroleum system elements are listed in table 1. Metadata associated with this publication includes information on the study area and the zmap-format files. The digital files listed in table 1 were compiled as part of the Petroleum Processes Research Project being conducted by the Central Energy Resources Team of the U.S. Geological Survey, which focuses on modeling petroleum generation, 3 migration, and accumulation through time for petroleum systems of the WCSB. Primary purposes of the WCSB study are to Construct the 1-D/2-D/3-D petroleum system models of the WCSB. Actual boundaries of the study area are documented within the metadata; excluded are northern Alberta and eastern Saskatchewan, but fringing areas of the United States are included.Publish results of the research and the grid files generated for use in the 3-D model of the WCSB.Evaluate the use of petroleum system modeling in assessing undiscovered oil and gas resources for geologic provinces across the World.

  6. Work Sharing Case Studies.

    ERIC Educational Resources Information Center

    McCarthy, Maureen E.; And Others

    Designed to provide private sector employers with the practical information necessary to select and then to design and implement work sharing arrangements, this book presents case studies of some 36 work sharing programs. Topics covered in the case studies include the circumstances leading to adoption of the program, details of compensation and…

  7. Estimating the Kinematic Viscosity of Petroleum Fractions

    NASA Astrophysics Data System (ADS)

    AlMulla, Hessa A.; Albahri, Tareq A.

    2017-04-01

    Kinematic viscosity correlation has been developed for liquid petroleum fractions at 37.78°C and 98.89°C (100 and 210°F) standard temperatures using a large variety of experimental data. The only required inputs are the specific gravity and the average boiling point temperature. The accuracy of the correlation was compared with several other correlations available in the literature. The proposed correlations proved to be more accurate in predicting the viscosity at 37.78°C and 98.89°C with average absolute deviations of 0.39 and 0.72 mm2/s, respectively. Another objective was to develop a relation for the variation of viscosity with temperature to predict the viscosity of petroleum fraction at a certain temperature from the knowledge of the viscosity for the same liquid at two other temperatures. The newly developed correlation represents a wide array of temperatures from 20°C to 150°C and viscosities from 0.14 mm2/s to 343.64 mm2/s. The results have been validated with experimental data consisting of 9558 data points, yielding an overall deviation of 0.248 mm2/s and R2 of 0.998. In addition, new formulas were developed to interconvert the viscosity of petroleum fractions from one unit of measure to another based on finding the best fit for a set of experimental data from the literature with R2 as high as 1.0 for many cases. Detailed analysis showed good agreement between the predicted values and the experimental data.

  8. An alternative experimental case-control design for genetic association studies on bovine mastitis.

    PubMed

    Biffani, S; Del Corvo, M; Capoferri, R; Pedretti, A; Luini, M; Williams, J L; Pagnacco, G; Minvielle, F; Minozzi, G

    2017-04-01

    The possibility of using genetic control strategies to increase disease resistance to infectious diseases relies on the identification of markers to include in the breeding plans. Possible incomplete exposure of mastitis-free (control) animals, however, is a major issue to find relevant markers in genetic association studies for infectious diseases. Usually, designs based on elite dairy sires are used in association studies, but an epidemiological case-control strategy, based on cows repeatedly field-tested could be an alternative for disease traits. To test this hypothesis, genetic association results obtained in the present work from a cohort of Italian Holstein cows tested for mastitis over time were compared with those from a previous genome-wide scan on Italian Holstein sires genotyped with 50k single nucleotide polymorphisms for de-regressed estimated breeding values for somatic cell counts (SCCs) on Bos taurus autosome (BTA6) and BTA14. A total of 1121 cows were selected for the case-control approach (cases=550, controls=571), on a combination of herd level of SCC incidence and of within herd individual level of SCC. The association study was conducted on nine previously identified markers, six on BTA6 and four on BTA14, using the R statistical environment with the 'qtscore' function of the GenABEL package, on high/low adjusted linear score as a binomial trait. The results obtained in the cow cohort selected on epidemiological information were in agreement with those obtained from the previous sire genome-wide association study (GWAS). Six out of the nine markers showed significant association, four on BTA14 (rs109146371, rs109234250, rs109421300, rs109162116) and two on BTA6 (rs110527224 and rs42766480). Most importantly, using mastitis as a case study, the current work further validated the alternative use of historical field disease data in case-control designs for genetic analysis of infectious diseases in livestock.

  9. Petroleum supply annual, 1990. [Contains Glossary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1991-05-30

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1990 through annual and monthly surveys. The PSA is divided into two volumes. This first volume contains three sections, Summary Statistics, Detailed Statistics, and Refinery Capacity, each with final annual data. The second volume contains final statistics for each month of 1990, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes,more » located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary. 35 tabs.« less

  10. Petroleum supply annual 1992. [Contains glossary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1993-05-27

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. The first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. This second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them.more » Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary.« less

  11. 21 CFR 573.740 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.740 Odorless light petroleum hydrocarbons. Odorless light petroleum... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Odorless light petroleum hydrocarbons. 573.740...

  12. 21 CFR 573.740 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.740 Odorless light petroleum hydrocarbons. Odorless light petroleum... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Odorless light petroleum hydrocarbons. 573.740...

  13. 21 CFR 573.740 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.740 Odorless light petroleum hydrocarbons. Odorless light petroleum... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Odorless light petroleum hydrocarbons. 573.740...

  14. 21 CFR 573.740 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.740 Odorless light petroleum hydrocarbons. Odorless light petroleum... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Odorless light petroleum hydrocarbons. 573.740...

  15. 21 CFR 573.740 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.740 Odorless light petroleum hydrocarbons. Odorless light petroleum... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Odorless light petroleum hydrocarbons. 573.740...

  16. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in...

  17. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in...

  18. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in...

  19. 21 CFR 178.3650 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Odorless light petroleum hydrocarbons. 178.3650... SANITIZERS Certain Adjuvants and Production Aids § 178.3650 Odorless light petroleum hydrocarbons. Odorless light petroleum hydrocarbons may be safely used, as a component of nonfood articles intended for use in...

  20. [Humus composition of petroleum hydrocarbon-contaminated soil].

    PubMed

    Feng, Jun; Tang, Li-Na; Zhang, Jin-Jing; Dou, Sen

    2008-05-01

    An abandoned petroleum well which had been exploited for about twenty years in Songyuan city of Jilin Province, China, was selected to study the compositions and characteristics of soil humus using revised humus composition method and Simon-Kumada method. Soil samples were collected at 0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5, 7.5 and 10.5 m apart from the well head. Results show that the petroleum contents increase from 0.08 g/kg (10.5 m to the well head) to 153.3 g/kg (0.5 m to the well head). With the increase in petroleum content, the contents of soil organic carbon and water soluble organic carbon increase; for total soil humus, the contents of extractable humus (HE) and humic acid (HA) decrease whereas that of humin (HM) increase; the percentage of HA/HE (PQ 72.0%-8.05%) decrease and HM/HE ratio (31.4-76.7) increase; for different combined humus, the contents of loosely combined humus (HI) and stably combined humus (HII) have a decrease tendency while that of tightly combined humus (HIII) increase; the HI/HII ratio (0.19-0.39) shows an increase tendency, whereas HI/HIII ratio (0.032-0.003) and HII/HIII ratio (0.096-0.009) decrease; the PQs of HI (3.21%-1.42%) and HIII (58.1%-35.5%) also decrease, and the range of PQ change is less in HI than in HII; the color coefficient (deltalogk) of water soluble organic matter (WSOM) decreases, whereas no obvious change for HA. The above results indicate that petroleum hydrocarbon promotes the formation of HM but not HA. The decrease in HA is mainly due to the restraining effect of petroleum hydrocarbon on the formation of stably combined HA. Petroleum hydrocarbon leads molecular structure of WSOM more complex but no effect on molecular structure of HA.

  1. Design and validity of a clinic-based case-control study on the molecular epidemiology of lymphoma

    PubMed Central

    Cerhan, James R; Fredericksen, Zachary S; Wang, Alice H; Habermann, Thomas M; Kay, Neil E; Macon, William R; Cunningham, Julie M; Shanafelt, Tait D; Ansell, Stephen M; Call, Timothy G; Witzig, Thomas E; Slager, Susan L; Liebow, Mark

    2011-01-01

    We present the design features and implementation of a clinic-based case-control study on the molecular epidemiology of lymphoma conducted at the Mayo Clinic (Rochester, Minnesota, USA), and then assess the internal and external validity of the study. Cases were newly diagnosed lymphoma patients from Minnesota, Iowa and Wisconsin seen at Mayo and controls were patients from the same region without lymphoma who had a pre-scheduled general medical examination, frequency matched on age, sex and residence. Overall response rates were 67% for cases and 70% for controls; response rates were lower for cases and controls over age 70 years, cases with more aggressive disease, and controls from the local area, although absolute differences were modest. Cases and controls were well-balanced on age, sex, and residence characteristics. Demographic and disease characteristics of NHL cases were similar to population-based cancer registry data. Control distributions were similar to population-based data on lifestyle factors and minor allele frequencies of over 500 SNPs, although smoking rates were slightly lower. Associations with NHL in the Mayo study for smoking, alcohol use, family history of lymphoma, autoimmune disease, asthma, eczema, body mass index, and single nucleotide polymorphisms in TNF (rs1800629), LTA (rs909253), and IL10 (rs1800896) were at a magnitude consistent with estimates from pooled studies in InterLymph, with history of any allergy the only directly discordant result in the Mayo study. These data suggest that this study should have strong internal and external validity. This framework may be useful to others who are designing a similar study. PMID:21686124

  2. Validity and consistency assessment of accident analysis methods in the petroleum industry.

    PubMed

    Ahmadi, Omran; Mortazavi, Seyed Bagher; Khavanin, Ali; Mokarami, Hamidreza

    2017-11-17

    Accident analysis is the main aspect of accident investigation. It includes the method of connecting different causes in a procedural way. Therefore, it is important to use valid and reliable methods for the investigation of different causal factors of accidents, especially the noteworthy ones. This study aimed to prominently assess the accuracy (sensitivity index [SI]) and consistency of the six most commonly used accident analysis methods in the petroleum industry. In order to evaluate the methods of accident analysis, two real case studies (process safety and personal accident) from the petroleum industry were analyzed by 10 assessors. The accuracy and consistency of these methods were then evaluated. The assessors were trained in the workshop of accident analysis methods. The systematic cause analysis technique and bowtie methods gained the greatest SI scores for both personal and process safety accidents, respectively. The best average results of the consistency in a single method (based on 10 independent assessors) were in the region of 70%. This study confirmed that the application of methods with pre-defined causes and a logic tree could enhance the sensitivity and consistency of accident analysis.

  3. Genome Sequence of the Electrogenic Petroleum-Degrading Thalassospira sp. Strain HJ

    PubMed Central

    Kiseleva, Larisa; Garushyants, Sofya K.; Briliute, Justina; Simpson, David J. W.; Goryanin, Igor

    2015-01-01

    We present the draft genome of the petroleum-degrading Thalassospira sp. strain HJ, isolated from tidal marine sediment. Knowledge of this genomic information will inform studies on electrogenesis and means to degrade environmental organic contaminants, including compounds found in petroleum. PMID:25977412

  4. Comparing Single Case Design Overlap-Based Effect Size Metrics from Studies Examining Speech Generating Device Interventions

    ERIC Educational Resources Information Center

    Chen, Mo; Hyppa-Martin, Jolene K.; Reichle, Joe E.; Symons, Frank J.

    2016-01-01

    Meaningfully synthesizing single case experimental data from intervention studies comprised of individuals with low incidence conditions and generating effect size estimates remains challenging. Seven effect size metrics were compared for single case design (SCD) data focused on teaching speech generating device use to individuals with…

  5. 75 FR 48320 - National Petroleum Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-10

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public...

  6. Front-End and Back-End Database Design and Development: Scholar's Academy Case Study

    ERIC Educational Resources Information Center

    Parks, Rachida F.; Hall, Chelsea A.

    2016-01-01

    This case study consists of a real database project for a charter school--Scholar's Academy--and provides background information on the school and its cafeteria processing system. Also included are functional requirements and some illustrative data. Students are tasked with the design and development of a database for the purpose of improving the…

  7. Petroleum contaminated water and health symptoms: a cross-sectional pilot study in a rural Nigerian community.

    PubMed

    Kponee, Kalé Zainab; Chiger, Andrea; Kakulu, Iyenemi Ibimina; Vorhees, Donna; Heiger-Bernays, Wendy

    2015-11-06

    The oil-rich Niger Delta suffers from extensive petroleum contamination. A pilot study was conducted in the region of Ogoniland where one community, Ogale, has drinking water wells highly contaminated with a refined oil product. In a 2011 study, the United Nations Environment Programme (UNEP) sampled Ogale drinking water wells and detected numerous petroleum hydrocarbons, including benzene at concentrations as much as 1800 times higher than the USEPA drinking water standard. UNEP recommended immediate provision of clean drinking water, medical surveillance, and a prospective cohort study. Although the Nigerian government has provided emergency drinking water, other UNEP recommendations have not been implemented. We aimed to (i) follow up on UNEP recommendations by investigating health symptoms associated with exposure to contaminated water; and (ii) assess the adequacy and utilization of the government-supplied emergency drinking water. We recruited 200 participants from Ogale and a reference community, Eteo, and administered questionnaires to investigate water use, perceived water safety, and self-reported health symptoms. Our multivariate regression analyses show statistically significant associations between exposure to Ogale drinking water and self-reported health symptoms consistent with petroleum exposure. Participants in Ogale more frequently reported health symptoms related to neurological effects (OR = 2.8), hematological effects (OR = 3.3), and irritation (OR = 2.7). Our results are the first from a community relying on drinking water with such extremely high concentrations of benzene and other hydrocarbons. The ongoing exposure and these pilot study results highlight the need for more refined investigation as recommended by UNEP.

  8. Bioremediation of Petroleum and Radiological Contaminated Soils at the Savannah River Site: Laboratory to Field Scale Applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BRIGMON, ROBINL.

    In the process of Savannah River Site (SRS) operations limited amounts of waste are generated containing petroleum, and radiological contaminated soils. Currently, this combination of radiological and petroleum contaminated waste does not have an immediate disposal route and is being stored in low activity vaults. SRS developed and implemented a successful plan for clean up of the petroleum portion of the soils in situ using simple, inexpensive, bioreactor technology. Treatment in a bioreactor removes the petroleum contamination from the soil without spreading radiological contamination to the environment. This bioreactor uses the bioventing process and bioaugmentation or the addition of themore » select hydrocarbon degrading bacteria. Oxygen is usually the initial rate-limiting factor in the biodegradation of petroleum hydrocarbons. Using the bioventing process allowed control of the supply of nutrients and moisture based on petroleum contamination concentrations and soil type. The results of this work have proven to be a safe and cost-effective means of cleaning up low level radiological and petroleum-contaminated soil. Many of the other elements of the bioreactor design were developed or enhanced during the demonstration of a ''biopile'' to treat the soils beneath a Polish oil refinery's waste disposal lagoons. Aerobic microorganisms were isolated from the aged refinery's acidic sludge contaminated with polycyclic aromatic hydrocarbons (PAHs). Twelve hydrocarbon-degrading bacteria were isolated from the sludge. The predominant PAH degraders were tentatively identified as Achromobacter, Pseudomonas Burkholderia, and Sphingomonas spp. Several Ralstonia spp were also isolated that produce biosurfactants. Biosurfactants can enhance bioremediation by increasing the bioavailability of hydrophobic contaminants including hydrocarbons. The results indicated that the diversity of acid-tolerant PAH-degrading microorganisms in acidic oil wastes may be much greater than

  9. Implementation of an Industrial-Based Case Study as the Basis for a Design Project in an Introduction to Mechanical Design Course

    ERIC Educational Resources Information Center

    Lackey, Ellen

    2011-01-01

    The purpose of this paper is to discuss the implementation of an industrial-based case study as the basis for a design project for the Spring 2009 Introduction to Mechanical Design Course at the University of Mississippi. Course surveys documented the lack of student exposure in classes to the types of projects typically experienced by engineers…

  10. A prospective study in the Australian petroleum industry. I. Mortality.

    PubMed Central

    Christie, D; Robinson, K; Gordon, I; Bisby, J

    1991-01-01

    This paper reports the mortality experience of employees of the Australian petroleum industry from 1981 to 1989. Two surveys by personal interview incorporated more than 15,000 employees representing 92% of the eligible population. Subjects were included in the analysis after completing five years of service in the industry. At the time of this report the cohort does not include sufficiently large numbers of women for useful analysis; results presented are restricted to men. By 31 December 1989, 76,529 person-years of observation had accumulated for male mortality with 241 deaths. The standardised mortality ratio (SMR) analysis showed a favourable mortality experience for most causes with overall cancer rates slightly lower than those of the national population. Whereas deficits were seen in some cancer sites, notably lung cancers (SMR 0.5, 95% confidence interval (95% CI) 0.3-0.8), mortality for lymphohaematopoietic cancers, notably leukaemia (SMR 1.6, 95% CI 0.6-3.4) suggested increased risk. The SMR for cancers of the pleura was 3.9 (95% CI 0.8-11). Two of the three cases seen had previous employment, however, in industries with likely exposure to asbestos. PMID:1878306

  11. 49 CFR 393.69 - Liquefied petroleum gas systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Liquefied petroleum gas systems. 393.69 Section... ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.69 Liquefied petroleum gas systems. (a) A fuel system that uses liquefied petroleum gas as a fuel for the operation of a motor vehicle or for the...

  12. Monitoring the petroleum bitumen characteristics changes during their interaction with the polymers

    NASA Astrophysics Data System (ADS)

    Belyaev, P. S.; Mishchenko, S. V.; Belyaev, V. P.; Frolov, V. A.

    2017-08-01

    The subject of the study is the characteristics (penetration, softening temperature, ductility and elasticity) of a road binder based on petroleum bitumen. The work purpose is to monitor the changes in the characteristics of petroleum bitumen when it interacting with polymers: thermoplastic elastomer, low-density polyethylene, including the adhesive additive presence. To carry out the research a special laboratory facility was designed and manufactured with two blade mixers providing intensive turbulent mixing and the possibility to effect on the transition process of combining the components in a polymer-bitumen binder. To construct a mathematical model of the polymer-bitumen binder characteristics dependence from the composition, methods of statistical experiments planning were used. The possibility of the expensive thermoplastic elastomers replacement with polyethylene is established while maintaining acceptable polymer-bitumen binder quality parameters. The obtained results are proposed for use in road construction. They allow to reduce the roads construction cost with solving the problem of recycling long-term waste packaging from polyethylene.

  13. Toward Eco Product Development with Qualitative and CAE Design Process - Case Study of Flame Guiding Module

    NASA Astrophysics Data System (ADS)

    Chen, W. L.; Chao, F. L.

    2018-04-01

    Sustainable products become increasingly important for company in addressing eco-performance to satisfy global environmental regulations. Case study of flame guiding module reviewed design process and concerns related to the torch design. For enhancing flame height, the torch was embedded with an airflow guidance structure. The design process and design methodologies were investigated as an eco-design case study. Combine qualitative and CAE simulation were proposed to fulfil its main and auxiliary functions including reduction of impact during use. The design guidelines help prevent mistake arrangements, CAE helps understand combustion phenomenon. The flow field simulation enables fine tune of geometric design. Functional test and measurement are carried out to confirm the product features. On Eco-performance, we choose 5 items for evaluation the status of previous and redesign module, namely function need, low impact material, few manufacturing steps, low energy consumption, and safety. The radar diagram indicates that eco-performance of redesign module is better. Life cycle assessment calculated the carbon footprint of the manufacturing and processing stage with Eco-it. By using recycled steel in the flame module, it reduces raw material stage carbon footprint significantly.

  14. Assessing Bacillus subtilis biosurfactant effects on the biodegradation of petroleum products.

    PubMed

    Montagnolli, Renato Nallin; Lopes, Paulo Renato Matos; Bidoia, Ederio Dino

    2015-01-01

    Microbial pollutant removal capabilities can be determined and exploited to accomplish bioremediation of hydrocarbon-polluted environments. Thus, increasing knowledge on environmental behavior of different petroleum products can lead to better bioremediation strategies. Biodegradation can be enhanced by adding biosurfactants to hydrocarbon-degrading microorganism consortia. This work aimed to improve petroleum products biodegradation by using a biosurfactant produced by Bacillus subtilis. The produced biosurfactant was added to biodegradation assays containing crude oil, diesel, and kerosene. Biodegradation was monitored by a respirometric technique capable of evaluating CO₂ production in an aerobic simulated wastewater environment. The biosurfactant yielded optimal surface tension reduction (30.9 mN m(-1)) and emulsification results (46.90% with kerosene). Biodegradation successfully occurred and different profiles were observed for each substance. Precise mathematical modeling of biosurfactant effects on petroleum degradation profile was designed, hence allowing long-term kinetics prediction. Assays containing biosurfactant yielded a higher overall CO₂ output. Higher emulsification and an enhanced CO2 production dataset on assays containing biosurfactants was observed, especially in crude oil and kerosene.

  15. A Case Study in Collaboration: Looking Back at the National Graphic Design Archive

    ERIC Educational Resources Information Center

    Remington, R. Roger

    2004-01-01

    Inspired by the 1980s interest in graphic design history, an initially productive, but difficult to sustain, collaboration among three American universities from the late 1980s to the mid-1990s, is the subject of this case study. The ideas behind a much-needed archival consortium, its organization and its difficulties in sustaining collaboration…

  16. Biological Remediation of Petroleum Contaminants

    NASA Astrophysics Data System (ADS)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  17. Genome Sequence of the Electrogenic Petroleum-Degrading Thalassospira sp. Strain HJ.

    PubMed

    Kiseleva, Larisa; Garushyants, Sofya K; Briliute, Justina; Simpson, David J W; Cohen, Michael F; Goryanin, Igor

    2015-05-14

    We present the draft genome of the petroleum-degrading Thalassospira sp. strain HJ, isolated from tidal marine sediment. Knowledge of this genomic information will inform studies on electrogenesis and means to degrade environmental organic contaminants, including compounds found in petroleum. Copyright © 2015 Kiseleva et al.

  18. Freight Transportation Petroleum Conservation - Viability Evaluation

    DOT National Transportation Integrated Search

    1979-03-01

    This report develops a comprehensive perspective of current and near-term future energy demand in U.S. freight transportation. Synthesis of studies of many agencies indicate that the annual petroleum fuel demand for freight transportation in 1985 wil...

  19. Quantitative proteomics analysis reveals the tolerance of Mirabilis jalapa L. to petroleum contamination.

    PubMed

    Chen, Shuisen; Ma, Hui; Guo, Zhifu; Feng, Yaping; Lin, Jingwei; Zhang, Menghua; Zhong, Ming

    2017-03-01

    Petroleum is not only an important energy resource but is also a major soil pollutant. To gain better insight into the adaptability mechanism of Mirabilis jalapa to petroleum-contaminated soil, the protein profiles of M. jalapa root were investigated using label-free quantitative proteomics technique. After exposing to petroleum-contaminated soil for 24 h, 34 proteins significantly changed their protein abundance and most of the proteins increased in protein abundance (91.18%). Combined with gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses as well as data from previous studies, our results revealed that M. jalapa enhanced tolerance to petroleum by changing antioxidation and detoxification, cell wall organization, amino acid and carbohydrate metabolism, transportation and protein process, and so on. These metabolism alterations could result in the production and secretion of low molecular carbohydrate, amino acid, and functional protein, which enhanced the bioavailability of petroleum and reducing the toxicity of the petroleum. Taken together, these results provided novel information for better understanding of the tolerance of M. jalapa to petroleum stress.

  20. Total petroleum hydrocarbons in edible marine biota from Northern Persian Gulf.

    PubMed

    Nozar, Seyedeh Laili Mohebbi; Pauzi, Mohamad Zakaria; Salarpouri, Ali; Daghooghi, Behnam; Salimizadeh, Maryam

    2015-04-01

    To provide a baseline information for consumer's health, distribution of total petroleum hydrocarbons in 18 edible marine biota species from northern Persian Gulf was evaluated. The samples were purchased from fish market of Hormozgan Province, South of Iran. Marine biota samples included different species with various feeding habits and were analyzed based on ultraviolet florescence spectroscopy. Petroleum hydrocarbons showed narrow variation, ranging from 0.67 to 3.36 μg/g dry weight. The maximum value was observed in silver pomfret. Anchovy and silver pomfret with the highest content of petroleum hydrocarbons were known as good indicator for oil pollution in the studied area. From public health point of view, the detected concentrations for total petroleum hydrocarbons were lower than hazardous guidelines. The results were recorded as background data and information in the studied area; the continuous monitoring of pollutants is recommended, according to the rapid extension of industrial and oily activities in Hormozgan Province.

  1. Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

    ERIC Educational Resources Information Center

    Gibson, Ken

    2013-01-01

    This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

  2. Game Coaching System Design and Development: A Retrospective Case Study of FPS Trainer

    ERIC Educational Resources Information Center

    Tan, Wee Hoe

    2013-01-01

    This paper is a retrospective case study of a game-based learning (GBL) researcher who cooperated with a professional gamer and a team of game developers to design and develop a coaching system for First-Person Shooter (FPS) players. The GBL researcher intended to verify the ecological validity of a model of cooperation; the developers wanted to…

  3. Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies

    NASA Technical Reports Server (NTRS)

    Wheeler, Robert W.; Benafan, Othmane; Gao, Xiujie; Calkins, Frederick T; Ghanbari, Zahra; Hommer, Garrison; Lagoudas, Dimitris; Petersen, Andrew; Pless, Jennifer M.; Stebner, Aaron P.; hide

    2016-01-01

    The primary goal of the Consortium for the Advancement of Shape Memory Alloy Research and Technology (CASMART) is to enable the design of revolutionary applications based on shape memory alloy (SMA) technology. In order to help realize this goal and reduce the development time and required experience for the fabrication of SMA actuation systems, several modeling tools have been developed for common actuator types and are discussed herein along with case studies, which highlight the capabilities and limitations of these tools. Due to their ability to sustain high stresses and recover large deformations, SMAs have many potential applications as reliable, lightweight, solid-state actuators. Their advantage over classical actuators can also be further improved when the actuator geometry is modified to fit the specific application. In this paper, three common actuator designs are studied: wires, which are lightweight, low-profile, and easily implemented; springs, which offer actuation strokes upwards of 200 at reduced mechanical loads; and torque tubes, which can provide large actuation forces in small volumes and develop a repeatable zero-load actuation response (known as the two-way shape memory effect). The modeling frameworks, which have been implemented in the design tools, are developed for each of these frequently used SMA actuator types. In order to demonstrate the versatility and flexibility of the presented design tools, as well as validate their modeling framework, several design challenges were completed. These case studies include the design and development of an active hinge for the deployment of a solar array or foldable space structure, an adaptive solar array deployment and positioning system, a passive air temperature controller for regulation flow temperatures inside of a jet engine, and a redesign of the Corvette active hatch, which allows for pressure equalization of the car interior. For each of the presented case studies, a prototype or proof

  4. Petroleum supply monthly, June 1999, with data for April 1999

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the datamore » reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.« less

  5. Petroleum supply monthly, February 1999, with data for December 1998

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated,more » the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.« less

  6. Interdisciplinarity in Higher Petroleum Education in the Context of International Standards

    ERIC Educational Resources Information Center

    Tymkiv, Nadiya

    2017-01-01

    The article deals with the problem of interdisciplinarity impact on higher petroleum education in Ukraine. Different views on the essence of interdisciplinarity, especially in the context of higher petroleum education, have been presented. It has been indicated that many scholars have studied the essence of interdisciplinarity within higher…

  7. Liquefied petroleum gas cold burn sustained while refueling a car.

    PubMed

    Scarr, Bronwyn; Mitra, Biswadev; Maini, Amit; Cleland, Heather

    2010-02-01

    There have been few cases of cold burn related to the exposure of liquid petroleum gas (LPG). We present the case of a young woman exposed to LPG while refueling her car who sustained partial thickness burns to the dorsum of her hand. Contact with LPG leaking from a pressurized system causes tissue damage because of cold injury. Immediate management of LPG is extrapolated from the management of frostbite. The increasing use of LPG mandates an awareness of prevention strategies and management principles in the setting of adverse events.

  8. 29 CFR 779.360 - Classification of liquefied-petroleum-gas sales.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Classification of liquefied-petroleum-gas sales. 779.360... Establishments Liquefied-Petroleum-Gas and Fuel Oil Dealers § 779.360 Classification of liquefied-petroleum-gas... ultimate consumer of liquefied-petroleum-gas, whether delivered in portable cylinders or in bulk to the...

  9. Enhanced ergonomics approaches for product design: a user experience ecosystem perspective and case studies.

    PubMed

    Xu, Wei

    2014-01-01

    This paper first discusses the major inefficiencies faced in current human factors and ergonomics (HFE) approaches: (1) delivering an optimal end-to-end user experience (UX) to users of a solution across its solution lifecycle stages; (2) strategically influencing the product business and technology capability roadmaps from a UX perspective and (3) proactively identifying new market opportunities and influencing the platform architecture capabilities on which the UX of end products relies. In response to these challenges, three case studies are presented to demonstrate how enhanced ergonomics design approaches have effectively addressed the challenges faced in current HFE approaches. Then, the enhanced ergonomics design approaches are conceptualised by a user-experience ecosystem (UXE) framework, from a UX ecosystem perspective. Finally, evidence supporting the UXE, the advantage and the formalised process for executing UXE and methodological considerations are discussed. Practitioner Summary: This paper presents enhanced ergonomics approaches to product design via three case studies to effectively address current HFE challenges by leveraging a systematic end-to-end UX approach, UX roadmaps and emerging UX associated with prioritised user needs and usages. Thus, HFE professionals can be more strategic, creative and influential.

  10. Virtual patients: the influence of case design and teamwork on students' perception and knowledge - a pilot study.

    PubMed

    Jäger, Frederik; Riemer, Martin; Abendroth, Martin; Sehner, Susanne; Harendza, Sigrid

    2014-07-08

    Virtual patient (VP) cases are an effective teaching method, although little is known about how to design and implement them for maximum effectiveness. The aim of this study was to explore the effect of case design and teamwork on students' learning outcome. One hundred forty-six undergraduate medical students participated in a mandatory medical computer science course consisting of five seminars. At the end of each seminar, they worked on one VP case, either in teams of two or individually. Each student filled out an introductory and a final survey and a feedback sheet after completing each case. Additionally, there was a surprise multiple choice (MC) test after the last seminar with three questions regarding each case. Students with more clinical experience and students who had worked in a team performed significantly better on MC questions. Students with less clinical experience more frequently used information which had been positioned less prominently on the case material. Certain aspects of case design were rated more positively by students who had an interest in e-learning. In general, students preferred to work on cases for less than 15 minutes. Clinically more advanced students and students working with a partner seem to benefit most from short VP cases with prominently presented information.

  11. Reduction of petroleum hydrocarbons and toxicity in refinery wastewater by bioremediation.

    PubMed

    Płaza, Grazyna A; Jangid, Kamlesh; Lukasik, Krystyna; Nałecz-Jawecki, Grzegorz; Berry, Christopher J; Brigmon, Robin L

    2008-10-01

    The aim of the study was to investigate petroleum waste remediation and toxicity reduction by five bacterial strains: Ralstonia picketti SRS (BP-20), Alcaligenes piechaudii SRS (CZOR L-1B), Bacillus subtilis (I'-1a), Bacillus sp. (T-1), and Bacillus sp. (T'-1), previously isolated from petroleum-contaminated soils. Petroleum hydrocarbons were significantly degraded (91%) by the mixed bacterial cultures in 30 days (reaching up to 29% in the first 72 h). Similarly, the toxicity of the biodegraded petroleum waste decreased 3-fold after 30 days. This work shows the influence of bacteria on hydrocarbon degradation and associated toxicity, and its dependence on the specific microorganisms present. The ability of these mixed cultures to degrade hydrocarbons and reduce toxicity makes them candidates for environmental restoration applications at other hydrocarbon-contaminated environments.

  12. Using case study within a sequential explanatory design to evaluate the impact of specialist and advanced practice roles on clinical outcomes: the SCAPE study.

    PubMed

    Lalor, Joan G; Casey, Dympna; Elliott, Naomi; Coyne, Imelda; Comiskey, Catherine; Higgins, Agnes; Murphy, Kathy; Devane, Declan; Begley, Cecily

    2013-04-08

    The role of the clinical nurse/midwife specialist and advanced nurse/midwife practitioner is complex not least because of the diversity in how the roles are operationalised across health settings and within multidisciplinary teams. This aim of this paper is to use The SCAPE Study: Specialist Clinical and Advanced Practitioner Evaluation in Ireland to illustrate how case study was used to strengthen a Sequential Explanatory Design. In Phase 1, clinicians identified indicators of specialist and advanced practice which were then used to guide the instrumental case study design which formed the second phase of the larger study. Phase 2 used matched case studies to evaluate the effectiveness of specialist and advanced practitioners on clinical outcomes for service users. Data were collected through observation, documentary analysis, and interviews. Observations were made of 23 Clinical Specialists or Advanced Practitioners, and 23 matched clinicians in similar matched non-postholding sites, while they delivered care. Forty-one service users, 41 clinicians, and 23 Directors of Nursing or Midwifery were interviewed, and 279 service users completed a survey based on the components of CS and AP practice identified in Phase 1. A coding framework, and the generation of cross tabulation matrices in NVivo, was used to make explicit how the outcome measures were confirmed and validated from multiple sources. This strengthened the potential to examine single cases that seemed 'different', and allowed for cases to be redefined. Phase 3 involved interviews with policy-makers to set the findings in context. Case study is a powerful research strategy to use within sequential explanatory mixed method designs, and adds completeness to the exploration of complex issues in clinical practice. The design is flexible, allowing the use of multiple data collection methods from both qualitative and quantitative paradigms. Multiple approaches to data collection are needed to evaluate the impact

  13. Case-crossover design and its implementation in R

    PubMed Central

    2016-01-01

    Case-crossover design is a variation of case-control design that it employs persons’ history periods as controls. Case-crossover design can be viewed as the hybrid of case-control study and crossover design. Characteristic confounding that is constant within one person can be well controlled with this method. The relative risk and odds ratio, as well as their 95% confidence intervals (CIs), can be estimated using Cochran-Mantel-Haenszel method. R codes for the calculation are provided in the main text. Readers may adapt these codes to their own task. Conditional logistic regression model is another way to estimate odds ratio of the exposure. Furthermore, it allows for incorporation of other time-varying covariates that are not constant within subjects. The model fitting per se is not technically difficult because there is well developed statistical package. However, it is challenging to convert original dataset obtained from case report form to that suitable to be passed to clogit() function. R code for this task is provided and explained in the text. PMID:27761445

  14. Analysis of Clinical Cohort Data Using Nested Case-control and Case-cohort Sampling Designs. A Powerful and Economical Tool.

    PubMed

    Ohneberg, K; Wolkewitz, M; Beyersmann, J; Palomar-Martinez, M; Olaechea-Astigarraga, P; Alvarez-Lerma, F; Schumacher, M

    2015-01-01

    Sampling from a large cohort in order to derive a subsample that would be sufficient for statistical analysis is a frequently used method for handling large data sets in epidemiological studies with limited resources for exposure measurement. For clinical studies however, when interest is in the influence of a potential risk factor, cohort studies are often the first choice with all individuals entering the analysis. Our aim is to close the gap between epidemiological and clinical studies with respect to design and power considerations. Schoenfeld's formula for the number of events required for a Cox' proportional hazards model is fundamental. Our objective is to compare the power of analyzing the full cohort and the power of a nested case-control and a case-cohort design. We compare formulas for power for sampling designs and cohort studies. In our data example we simultaneously apply a nested case-control design with a varying number of controls matched to each case, a case cohort design with varying subcohort size, a random subsample and a full cohort analysis. For each design we calculate the standard error for estimated regression coefficients and the mean number of distinct persons, for whom covariate information is required. The formula for the power of a nested case-control design and the power of a case-cohort design is directly connected to the power of a cohort study using the well known Schoenfeld formula. The loss in precision of parameter estimates is relatively small compared to the saving in resources. Nested case-control and case-cohort studies, but not random subsamples yield an attractive alternative for analyzing clinical studies in the situation of a low event rate. Power calculations can be conducted straightforwardly to quantify the loss of power compared to the savings in the num-ber of patients using a sampling design instead of analyzing the full cohort.

  15. 48 CFR 908.7109 - Fuels and packaged petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Fuels and packaged petroleum products. 908.7109 Section 908.7109 Federal Acquisition Regulations System DEPARTMENT OF ENERGY....7109 Fuels and packaged petroleum products. Acquisitions of fuel and packaged petroleum products by DOE...

  16. 46 CFR 105.05-2 - Prohibitions regarding petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Prohibitions regarding petroleum products. 105.05-2... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-2 Prohibitions regarding petroleum products. (a) Commercial fishing vessels shall not transport Grade A flammable liquids...

  17. 46 CFR 105.05-2 - Prohibitions regarding petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Prohibitions regarding petroleum products. 105.05-2... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-2 Prohibitions regarding petroleum products. (a) Commercial fishing vessels shall not transport Grade A flammable liquids...

  18. Designing climate-smart conservation: guidance and case studies.

    PubMed

    Hansen, Lara; Hoffman, Jennifer; Drews, Carlos; Mielbrecht, Eric

    2010-02-01

    To be successful, conservation practitioners and resource managers must fully integrate the effects of climate change into all planning projects. Some conservation practitioners are beginning to develop, test, and implement new approaches that are designed to deal with climate change. We devised four basic tenets that are essential in climate-change adaptation for conservation: protect adequate and appropriate space, reduce nonclimate stresses, use adaptive management to implement and test climate-change adaptation strategies, and work to reduce the rate and extent of climate change to reduce overall risk. To illustrate how this approach applies in the real world, we explored case studies of coral reefs in the Florida Keys; mangrove forests in Fiji, Tanzania, and Cameroon; sea-level rise and sea turtles in the Caribbean; tigers in the Sundarbans of India; and national planning in Madagascar. Through implementation of these tenets conservation efforts in each of these regions can be made more robust in the face of climate change. Although these approaches require reconsidering some traditional approaches to conservation, this new paradigm is technologically, economically, and intellectually feasible.

  19. Developing effective web-based regional anesthesia education: a randomized study evaluating case-based versus non-case-based module design.

    PubMed

    Kopp, Sandra L; Smith, Hugh M

    2011-01-01

    Little is known about the use of Web-based education in regional anesthesia training. Benefits of Web-based education include the ability to standardize learning material quality and content, build appropriate learning progressions, use interactive multimedia technologies, and individualize delivery of course materials. The goals of this investigation were (1) to determine whether module design influences regional anesthesia knowledge acquisition, (2) to characterize learner preference patterns among anesthesia residents, and (3) to determine whether learner preferences play a role in knowledge acquisition. Direct comparison of knowledge assessments, learning styles, and learner preferences will be made between an interactive case-based and a traditional textbook-style module design. Forty-three Mayo Clinic anesthesiology residents completed 2 online modules, a knowledge pretest, posttest, an Index of Learning Styles assessment, and a participant satisfaction survey. Interscalene and lumbar plexus regional techniques were selected as the learning content for 4 Web modules constructed using the Blackboard Vista coursework application. One traditional textbook-style module and 1 interactive case-based module were designed for each of the interscalene and lumbar plexus techniques. Participants scored higher on the postmodule knowledge assessment for both of the interscalene and lumbar plexus modules. Postmodule knowledge performance scores were independent of both module design (interactive case-based versus traditional textbook style) and learning style preferences. However, nearly all participants reported a preference for Web-based learning and believe that it should be used in anesthesia resident education. Participants did not feel that Web-base learning should replace the current lecture-based curriculum. All residents scored higher on the postmodule knowledge assessment, but this improvement was independent of the module design and individual learning styles

  20. Initialization of metabolism in prebiotic petroleum

    NASA Astrophysics Data System (ADS)

    Mekki-Berrada, Ali

    The theoretical and bibliographical work on the geochemical origin of life, which I present here, it works on the assumption that: "The class of more complex molecules of life that can have a geochemical and abiotic origin is the class of fatty acid with long aliphatic chain". This idea comes from the controversy over the abiotic oil industry, and the first measurements of abiotic oil at mid-ocean ridges (Charlou J.L. et al. 2002, Proskurowski G. et al. 2008). To go further and propose a comprehensive experimentation on the origin of life, I propose in this article the idea that the prebiotic soup or prebiotic petroleum would stem from the diagenesis of the gas clathrates/sediments mixture. Gas, H2S H2 N2 CH4 CO2, are produced at mid-ocean ridges, and at large-scale at the seafloor, by serpentinization. Sediments contain hydrogenophosphates as a source of phosphate and minerals to the surface catalysis. Extreme conditions experienced by some prokaryotes and pressures and temperatures of submarine oilfields of fossil petroleum are close. The hydrostatic pressure is around 1.5 kbar and the temperature is below 150 °C. This experiment I propose is quite feasible today since these conditions are used: In research and exploration of fossil petroleum; In the field of organic chemistry called "green chemistry" and where temperatures remain low and the pressure can reach 10 kbar; to study the biology of prokaryotes living in the fossil petroleum of industrial interest, these studies are quite comparable to experiment with prebiotic oil; Finally, this experiment can be based on research on abiotic CH4 on Mars and abiotic hydrocarbons on Titan. The next step in the theoretical research of the origin of life is the abiotic synthesis of liposomes. Abiotic synthesis liposomes just requires synthesis of glycerol and ethanolamine (or serine) esterifying the phosphate and fatty acid. The state of research on the abiotic synthesis of these molecules shows that synthesis of

  1. 46 CFR 58.16-7 - Use of liquefied petroleum gas.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 2 2011-10-01 2011-10-01 false Use of liquefied petroleum gas. 58.16-7 Section 58.16-7... MACHINERY AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-7 Use of liquefied petroleum gas. (a) Cooking equipment using liquefied petroleum gas on vessels of 100 gross tons or more that...

  2. Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies report. Volume 2: Supplement to design trade-off studies

    NASA Technical Reports Server (NTRS)

    1979-01-01

    Results of studies leading to the preliminary design of a hybrid passenger vehicle which is projected to have the maximum potential for reducing petroleum consumption in the near term are presented. Heat engine/electric hybrid vehicle tradeoffs, assessment of battery power source, and weight and cost analysis of key components are among the topics covered. Performance of auxiliary equipment, such as power steering, power brakes, air conditioning, lighting and electrical accessories, heating and ventilation is discussed along with the selection of preferred passenger compartment heating procedure for the hybrid vehicle. Waste heat from the engine, thermal energy storage, and an auxiliary burner are among the approaches considered.

  3. Treatment of petroleum hydrocarbon polluted environment through bioremediation: a review.

    PubMed

    Singh, Kriti; Chandra, Subhash

    2014-01-01

    Bioremediation play key role in the treatment of petroleum hydrocarbon contaminated environment. Exposure of petroleum hydrocarbon into the environment occurs either due to human activities or accidentally and cause environmental pollution. Petroleum hydrocarbon cause many toxic compounds which are potent immunotoxicants and carcinogenic to human being. Remedial methods for the treatment of petroleum contaminated environment include various physiochemical and biological methods. Due to the negative consequences caused by the physiochemical methods, the bioremediation technology is widely adapted and considered as one of the best technology for the treatment of petroleum contaminated environment. Bioremediation utilizes the natural ability of microorganism to degrade the hazardous compound into simpler and non hazardous form. This paper provides a review on the role of bioremediation in the treatment of petroleum contaminated environment, discuss various hazardous effects of petroleum hydrocarbon, various factors influencing biodegradation, role of various enzymes in biodegradation and genetic engineering in bioremediation.

  4. Petroleum Vapor Intrusion

    EPA Pesticide Factsheets

    One type of vapor intrusion is PVI, in which vapors from petroleum hydrocarbons such as gasoline, diesel, or jet fuel enter a building. Intrusion of contaminant vapors into indoor spaces is of concern.

  5. A Multiple Case Study of Faculty Control over Course Design and Its Effect on Faculty Efficacy

    ERIC Educational Resources Information Center

    King, Tara

    2017-01-01

    Online education continues to grow and change and different colleges and universities have varying degrees of faculty control over course design. This multiple case study investigated patterns in the efficacy of faculty who teach online courses in relation to the faculty members' involvement in the creation of elements of course design. The…

  6. 30 CFR 57.4463 - Liquefied petroleum gas use underground.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Liquefied petroleum gas use underground. 57... Fire Prevention and Control Flammable and Combustible Liquids and Gases § 57.4463 Liquefied petroleum gas use underground. Use of liquefied petroleum gases underground shall be limited to maintenance work...

  7. Uptake and trans-membrane transport of petroleum hydrocarbons by microorganisms

    PubMed Central

    Hua, Fei; Wang, Hong Qi

    2014-01-01

    Petroleum-based products are a primary energy source in the industry and daily life. During the exploration, processing, transport and storage of petroleum and petroleum products, water or soil pollution occurs regularly. Biodegradation of the hydrocarbon pollutants by indigenous microorganisms is one of the primary mechanisms of removal of petroleum compounds from the environment. However, the physical contact between microorganisms and hydrophobic hydrocarbons limits the biodegradation rate. This paper presents an updated review of the petroleum hydrocarbon uptake and transport across the outer membrane of microorganisms with the help of outer membrane proteins. PMID:26740752

  8. Estimating decades-long trends in petroleum field energy return on investment (EROI) with an engineering-based model.

    PubMed

    Tripathi, Vinay S; Brandt, Adam R

    2017-01-01

    This paper estimates changes in the energy return on investment (EROI) for five large petroleum fields over time using the Oil Production Greenhouse Gas Emissions Estimator (OPGEE). The modeled fields include Cantarell (Mexico), Forties (U.K.), Midway-Sunset (U.S.), Prudhoe Bay (U.S.), and Wilmington (U.S.). Data on field properties and production/processing parameters were obtained from a combination of government and technical literature sources. Key areas of uncertainty include details of the oil and gas surface processing schemes. We aim to explore how long-term trends in depletion at major petroleum fields change the effective energetic productivity of petroleum extraction. Four EROI ratios are estimated for each field as follows: The net energy ratio (NER) and external energy ratio (EER) are calculated, each using two measures of energy outputs, (1) oil-only and (2) all energy outputs. In all cases, engineering estimates of inputs are used rather than expenditure-based estimates (including off-site indirect energy use and embodied energy). All fields display significant declines in NER over the modeling period driven by a combination of (1) reduced petroleum production and (2) increased energy expenditures on recovery methods such as the injection of water, steam, or gas. The fields studied had NER reductions ranging from 46% to 88% over the modeling periods (accounting for all energy outputs). The reasons for declines in EROI differ by field. Midway-Sunset experienced a 5-fold increase in steam injected per barrel of oil produced. In contrast, Prudhoe Bay has experienced nearly a 30-fold increase in amount of gas processed and reinjected per unit of oil produced. In contrast, EER estimates are subject to greater variability and uncertainty due to the relatively small magnitude of external energy investments in most cases.

  9. Estimating decades-long trends in petroleum field energy return on investment (EROI) with an engineering-based model

    PubMed Central

    Tripathi, Vinay S.

    2017-01-01

    This paper estimates changes in the energy return on investment (EROI) for five large petroleum fields over time using the Oil Production Greenhouse Gas Emissions Estimator (OPGEE). The modeled fields include Cantarell (Mexico), Forties (U.K.), Midway-Sunset (U.S.), Prudhoe Bay (U.S.), and Wilmington (U.S.). Data on field properties and production/processing parameters were obtained from a combination of government and technical literature sources. Key areas of uncertainty include details of the oil and gas surface processing schemes. We aim to explore how long-term trends in depletion at major petroleum fields change the effective energetic productivity of petroleum extraction. Four EROI ratios are estimated for each field as follows: The net energy ratio (NER) and external energy ratio (EER) are calculated, each using two measures of energy outputs, (1) oil-only and (2) all energy outputs. In all cases, engineering estimates of inputs are used rather than expenditure-based estimates (including off-site indirect energy use and embodied energy). All fields display significant declines in NER over the modeling period driven by a combination of (1) reduced petroleum production and (2) increased energy expenditures on recovery methods such as the injection of water, steam, or gas. The fields studied had NER reductions ranging from 46% to 88% over the modeling periods (accounting for all energy outputs). The reasons for declines in EROI differ by field. Midway-Sunset experienced a 5-fold increase in steam injected per barrel of oil produced. In contrast, Prudhoe Bay has experienced nearly a 30-fold increase in amount of gas processed and reinjected per unit of oil produced. In contrast, EER estimates are subject to greater variability and uncertainty due to the relatively small magnitude of external energy investments in most cases. PMID:28178318

  10. Designed for Learning: A Case Study in Rethinking Teaching and Learning for a Large First Year Class

    ERIC Educational Resources Information Center

    Goldacre, Lisa; Bolt, Susan; Lambiris, Michael

    2013-01-01

    This paper presents a case study in which the principles of scholarship were applied to designing an approach to learning suitable for large classes. While this case study describes an Australian first year Business Law unit, the findings presented in this paper would be relevant to a wide range of teachers faced with large enrollments in first…

  11. Development of a portable petroleum by-products chemical sensor, phase 1 and 2 report.

    DOT National Transportation Integrated Search

    2006-07-31

    We have proposed to tailor design nanoparticle based chemical sensors for the sensitive, selective and field portable analyses of soil samples for petroleum spill indicating hydrocarbons (such as benzene, toluene, ethyl-benzenes, xylenes, PCBs, trich...

  12. A case study on better iconographic design in electronic medical records' user interface.

    PubMed

    Tasa, Umut Burcu; Ozcan, Oguzhan; Yantac, Asim Evren; Unluer, Ayca

    2008-06-01

    It is a known fact that there is a conflict between what users expect and what user interface designers create in the field of medical informatics along with other fields of interface design. The objective of the study is to suggest, from the 'design art' perspective, a method for improving the usability of an electronic medical record (EMR) interface. The suggestion is based on the hypothesis that the user interface of an EMR should be iconographic. The proposed three-step method consists of a questionnaire survey on how hospital users perceive concepts/terms that are going to be used in the EMR user interface. Then icons associated with the terms are designed by a designer, following a guideline which is prepared according to the results of the first questionnaire. Finally the icons are asked back to the target group for proof. A case study was conducted with 64 medical staff and 30 professional designers for the first questionnaire, and with 30 medical staff for the second. In the second questionnaire 7.53 icons out of 10 were matched correctly with a standard deviation of 0.98. Also, all icons except three were matched correctly in at least 83.3% of the forms. The proposed new method differs from the majority of previous studies which are based on user requirements by leaning on user experiments instead. The study demonstrated that the user interface of EMRs should be designed according to a guideline that results from a survey on users' experiences on metaphoric perception of the terms.

  13. Meta-Analysis of Single-Case Research Design Studies on Instructional Pacing.

    PubMed

    Tincani, Matt; De Mers, Marilyn

    2016-11-01

    More than four decades of research on instructional pacing has yielded varying and, in some cases, conflicting findings. The purpose of this meta-analysis was to synthesize single-case research design (SCRD) studies on instructional pacing to determine the relative benefits of brisker or slower pacing. Participants were children and youth with and without disabilities in educational settings, excluding higher education. Tau-U, a non-parametric statistic for analyzing data in SCRD studies, was used to determine effect size estimates. The article extraction yielded 13 instructional pacing studies meeting contemporary standards for high quality SCRD research. Eleven of the 13 studies reported small to large magnitude effects when two or more pacing parameters were compared, suggesting that instructional pacing is a robust instructional variable. Brisker instructional pacing with brief inter-trial interval (ITI) produced small increases in correct responding and medium to large reductions in challenging behavior compared with extended ITI. Slower instructional pacing with extended wait-time produced small increases in correct responding, but also produced small increases in challenging behavior compared with brief wait-time. Neither brief ITI nor extended wait-time meets recently established thresholds for evidence-based practice, highlighting the need for further instructional pacing research. © The Author(s) 2016.

  14. 40 CFR 281.37 - Financial responsibility for UST systems containing petroleum.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... systems containing petroleum. 281.37 Section 281.37 Protection of Environment ENVIRONMENTAL PROTECTION... for No-Less-Stringent § 281.37 Financial responsibility for UST systems containing petroleum. (a) In... UST systems containing petroleum, the state requirements for financial responsibility for petroleum...

  15. A comparison of estimators from self-controlled case series, case-crossover design, and sequence symmetry analysis for pharmacoepidemiological studies.

    PubMed

    Takeuchi, Yoshinori; Shinozaki, Tomohiro; Matsuyama, Yutaka

    2018-01-08

    Despite the frequent use of self-controlled methods in pharmacoepidemiological studies, the factors that may bias the estimates from these methods have not been adequately compared in real-world settings. Here, we comparatively examined the impact of a time-varying confounder and its interactions with time-invariant confounders, time trends in exposures and events, restrictions, and misspecification of risk period durations on the estimators from three self-controlled methods. This study analyzed self-controlled case series (SCCS), case-crossover (CCO) design, and sequence symmetry analysis (SSA) using simulated and actual electronic medical records datasets. We evaluated the performance of the three self-controlled methods in simulated cohorts for the following scenarios: 1) time-invariant confounding with interactions between the confounders, 2) time-invariant and time-varying confounding without interactions, 3) time-invariant and time-varying confounding with interactions among the confounders, 4) time trends in exposures and events, 5) restricted follow-up time based on event occurrence, and 6) patient restriction based on event history. The sensitivity of the estimators to misspecified risk period durations was also evaluated. As a case study, we applied these methods to evaluate the risk of macrolides on liver injury using electronic medical records. In the simulation analysis, time-varying confounding produced bias in the SCCS and CCO design estimates, which aggravated in the presence of interactions between the time-invariant and time-varying confounders. The SCCS estimates were biased by time trends in both exposures and events. Erroneously short risk periods introduced bias to the CCO design estimate, whereas erroneously long risk periods introduced bias to the estimates of all three methods. Restricting the follow-up time led to severe bias in the SSA estimates. The SCCS estimates were sensitive to patient restriction. The case study showed that

  16. Systematic review of sensory integration therapy for individuals with disabilities: Single case design studies.

    PubMed

    Leong, H M; Carter, Mark; Stephenson, Jennifer

    2015-12-01

    Sensory integration therapy (SIT) is a controversial intervention that is widely used for people with disabilities. Systematic analysis was conducted on the outcomes of 17 single case design studies on sensory integration therapy for people with, or at-risk of, a developmental or learning disability, disorder or delay. An assessment of the quality of methodology of the studies found most used weak designs and poor methodology, with a tendency for higher quality studies to produce negative results. Based on limited comparative evidence, functional analysis-based interventions for challenging behavior were more effective that SIT. Overall the studies do not provide convincing evidence for the efficacy of sensory integration therapy. Given the findings of the present review and other recent analyses it is advised that the use of SIT be limited to experimental contexts. Issues with the studies and possible improvements for future research are discussed including the need to employ designs that allow for adequate demonstration of experimental control. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. 29 CFR 779.360 - Classification of liquefied-petroleum-gas sales.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Establishments Liquefied-Petroleum-Gas and Fuel Oil Dealers § 779.360 Classification of liquefied-petroleum-gas... an essential ingredient or principal raw material, such as sales of liquefied-petroleum-gas for the...

  18. 29 CFR 779.360 - Classification of liquefied-petroleum-gas sales.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Establishments Liquefied-Petroleum-Gas and Fuel Oil Dealers § 779.360 Classification of liquefied-petroleum-gas... an essential ingredient or principal raw material, such as sales of liquefied-petroleum-gas for the...

  19. 29 CFR 779.360 - Classification of liquefied-petroleum-gas sales.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Establishments Liquefied-Petroleum-Gas and Fuel Oil Dealers § 779.360 Classification of liquefied-petroleum-gas... an essential ingredient or principal raw material, such as sales of liquefied-petroleum-gas for the...

  20. U.S. Virgin Islands Transportation Petroleum Reduction Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, C.

    2011-09-01

    This NREL technical report determines a way for USVI to meet its petroleum reduction goal in the transportation sector. It does so first by estimating current petroleum use and key statistics and characteristics of USVI transportation. It then breaks the goal down into subordinate goals and estimates the petroleum impacts of these goals with a wedge analysis. These goals focus on reducing vehicle miles, improving fuel economy, improving traffic flow, using electric vehicles, using biodiesel and renewable diesel, and using 10% ethanol in gasoline. The final section of the report suggests specific projects to achieve the goals, and ranks themore » projects according to cost, petroleum reduction, time frame, and popularity.« less

  1. Petroleum exploration in Africa from space

    NASA Astrophysics Data System (ADS)

    Gianinetto, Marco; Frassy, Federico; Aiello, Martina; Rota Nodari, Francesco

    2017-10-01

    Hydrocarbons are nonrenewable resources but today they are the cheaper and easier energy we have access and will remain the main source of energy for this century. Nevertheless, their exploration is extremely high-risk, very expensive and time consuming. In this context, satellite technologies for Earth observation can play a fundamental role by making hydrocarbon exploration more efficient, economical and much more eco-friendly. Complementary to traditional geophysical methods such as gravity and magnetic (gravmag) surveys, satellite remote sensing can be used to detect onshore long-term biochemical and geochemical alterations on the environment produced by invisible small fluxes of light hydrocarbons migrating from the underground deposits to the surface, known as microseepage effect. This paper describes two case studies: one in South Sudan and another in Mozambique. Results show how remote sensing is a powerful technology for detecting active petroleum systems, thus supporting hydrocarbon exploration in remote or hardly accessible areas and without the need of any exploration license.

  2. Availability and Price of Petroleum and Petroleum Products Produced in Countries Other Than Iran, The

    EIA Publications

    2016-01-01

    This report was prepared in fulfillment of Section 1245(d)(4)(A) of the National Defense Authorization Act (NDAA) for Fiscal Year 2012, which requires that, not later than 60 days from enactment and every 60 days thereafter, the U.S. Energy Information Administration (EIA) "submit to Congress a report on the availability and price of petroleum and petroleum products produced in countries other than Iran in the 60-day period preceding the submission of the report."

  3. 10 CFR 474.3 - Petroleum-equivalent fuel economy calculation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Petroleum-equivalent fuel economy calculation. 474.3 Section 474.3 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.3 Petroleum-equivalent fuel economy calculation. (a) The...

  4. 40 CFR 280.41 - Requirements for petroleum UST systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Requirements for petroleum UST systems... UNDERGROUND STORAGE TANKS (UST) Release Detection § 280.41 Requirements for petroleum UST systems. Owners and operators of petroleum UST systems must provide release detection for tanks and piping as follows: (a) Tanks...

  5. 40 CFR 280.41 - Requirements for petroleum UST systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Requirements for petroleum UST systems... UNDERGROUND STORAGE TANKS (UST) Release Detection § 280.41 Requirements for petroleum UST systems. Owners and operators of petroleum UST systems must provide release detection for tanks and piping as follows: (a) Tanks...

  6. Case Studies of Secondary School Teachers Designing Socioscientific Issues-Based Instruction and Their Students' Socioscientific Reasoning

    NASA Astrophysics Data System (ADS)

    Karahan, Engin

    Addressing socioscientific issues (SSI) has been one of the main focuses in science education since the Science, Technology, and Society (STS) movement in the 1970s (Levinson, 2006); however, teaching controversial socioscientific issues has always been challenging for teachers (Dillon, 1994; Osborne, Duschl, & Fairbrother, 2002). Although teachers exhibit positive attitudes for using controversial socioscientific issues in their science classrooms, only a small percentage of them actually incorporate SSI content into their science curricula on a regular basis (Sadler, Amirshokoohi, Kazempour, & Allspaw, 2006; Lee & Witz, 2009). The literature in science education has highlighted the signi?cant relationships among teacher beliefs, teaching practices, and student learning (Bryan & Atwater, 2002; King, Shumow, & Lietz, 2001; Lederman, 1992). Despite the fact that the case studies present a relatively detailed picture of teachers' values and motivations for teaching SSI (e.g. Lee, 2006; Lee & Witz, 2009; Reis & Galvao, 2004), these studies still miss the practices of these teachers and potential outcomes for their students. Therefore, there is a great need for in-depth case studies that would focus on teachers' practices of designing and teaching SSI-based learning environments, their deeper beliefs and motivations for teaching SSI, and their students' response to these practices (Lee, 2006). This dissertation is structured as three separate, but related, studies about secondary school teachers' experiences of designing and teaching SSI-based classes and their students' understanding of science and SSI reasoning. The case studies in this dissertation seek answers for (1) teachers' practices of designing and teaching SSI-based instruction, as well as its relation to their deeper personal beliefs and motivations to teach SSI, and (2) how their students respond to their approaches of teaching SSI in terms of their science understanding and SSI reasoning. The first paper

  7. Case Study - Propane School Bus Fleets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Laughlin, M; Burnham, A.

    As part of the U.S. Department of Energy’s (DOE’s) effort to deploy transportation technologies that reduce U.S. dependence on imported petroleum, this study examines five school districts, one in Virginia and four in Texas, successful use of propane school buses. These school districts used school buses equipped with the newly developed liquid propane injection system that improves vehicle performance. Some of the school districts in this study saved nearly 50% on a cost per mile basis for fuel and maintenance relative to diesel. Using Argonne National Laboratory’s Alternative Fuel Life-Cycle Environmental and Economic Transportation (AFLEET) Tool developed for the DOE’smore » Clean Cities program to help Clean Cities stakeholders estimate petroleum use, greenhouse gas (GHG) emissions, air pollutant emissions and cost of ownership of light-duty and heavy-duty vehicles, the results showed payback period ranges from 3—8 years, recouping the incremental cost of the vehicles and infrastructure. Overall, fuel economy for these propane vehicles is close to that of displaced diesel vehicles, on an energy-equivalent basis. In addition, the 110 propane buses examined demonstrated petroleum displacement, 212,000 diesel gallon equivalents per year, and GHG benefits of 770 tons per year.« less

  8. The role of analytical chemistry in Niger Delta petroleum exploration: a review.

    PubMed

    Akinlua, Akinsehinwa

    2012-06-12

    Petroleum and organic matter from which the petroleum is derived are composed of organic compounds with some trace elements. These compounds give an insight into the origin, thermal maturity and paleoenvironmental history of petroleum, which are essential elements in petroleum exploration. The main tool to acquire the geochemical data is analytical techniques. Due to progress in the development of new analytical techniques, many hitherto petroleum exploration problems have been resolved. Analytical chemistry has played a significant role in the development of petroleum resources of Niger Delta. Various analytical techniques that have aided the success of petroleum exploration in the Niger Delta are discussed. The analytical techniques that have helped to understand the petroleum system of the basin are also described. Recent and emerging analytical methodologies including green analytical methods as applicable to petroleum exploration particularly Niger Delta petroleum province are discussed in this paper. Analytical chemistry is an invaluable tool in finding the Niger Delta oils. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. [Case-non case studies: Principles, methods, bias and interpretation].

    PubMed

    Faillie, Jean-Luc

    2017-10-31

    Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

  10. Characterization of Petroleum Residue in the Entrada Sandstone, Colorado National Monument

    USGS Publications Warehouse

    Lillis, Paul G.; King, J. David

    2007-01-01

    Introduction As part of the U.S. Geological Survey's (USGS) petroleum resource assessment of the Uinta-Piceance Province, Colorado and Utah, in 2000 (USGS Uinta-Piceance Assessment Team, 2003), some 170 oils, oil stains, and oil seeps were geochemically characterized and divided into genetic types (Lillis and others, 2003). Recognized oil types include Minturn, Phosphoria, Grassy Trail Creek, Mancos, Mesaverde, and Green River. Subsequent to that study, the existence and general locality of petroleum residue in the Middle Jurassic Entrada Sandstone in Colorado National Monument (CNM) was brought to the attention of the authors (Scott and others, 2001). Because the analysis of such non-commercial petroleum deposits commonly yields valuable regional resource-trend information, we collected and characterized the reported CNM petroleum residue and compared the results with identified oil types in the Uinta-Piceance Province. Three samples of Entrada Sandstone with petroleum residue were collected near Little Park Road along the south edge of the CNM in sec.20, T.12S., R.101W. The approximate extent of the petroleum staining was determined by field testing with solvent, and the stains appear to be restricted to the upper part of the 'board beds' unit (informal name, Scott and others, 2001) of the Entrada Sandstone between the two fault traces of the Glade Park fault.

  11. Combined Application of Study Design and Case-Based Learning Comprehensive Model in Epidemiology Teaching

    ERIC Educational Resources Information Center

    Shi, Xiuquan; Zhou, Yanna; Wang, Haiyan; Wang, Tao; Nie, Chan; Shi, Shangpeng

    2017-01-01

    This paper aims to conduct the SD-CBL (study design with the case based learning, SD-CBL) in Epidemiology teaching and evaluate its effect. Students from five classes were recruited, and a combined comprehensive teaching model of SD-CBL was used in the "Injury Epidemiology" chapter, while other chapters in "Epidemiology"…

  12. Forensic identification of spilled biodiesel and its blends with petroleum oil based on fingerprinting information.

    PubMed

    Yang, Zeyu; Hollebone, Bruce P; Wang, Zhendi; Yang, Chun; Brown, Carl; Landriault, Mike

    2013-06-01

    A case study is presented for the forensic identification of several spilled biodiesels and its blends with petroleum oil using integrated forensic oil fingerprinting techniques. The integrated fingerprinting techniques combined SPE with GC/MS for obtaining individual petroleum hydrocarbons (aliphatic hydrocarbons, polyaromatic hydrocarbons and their alkylated derivatives and biomarkers), and biodiesel hydrocarbons (fatty acid methyl esters, free fatty acids, glycerol, monoacylglycerides, and free sterols). HPLC equipped with evaporative scattering laser detector was also used for identifying the compounds that conventional GC/MS could not finish. The three environmental samples (E1, E2, and E3) and one suspected source sample (S2) were dominant with vegetable oil with high acid values and low concentration of fatty acid methyl ester. The suspected source sample S2 was responsible for the three spilled samples although E1 was slightly contaminated by petroleum oil with light hydrocarbons. The suspected source sample S1 exhibited with the high content of glycerol, low content of glycerides, and high polarity, indicating its difference from the other samples. These samples may be the separated byproducts in producing biodiesel. Canola oil source is the most possible feedstock for the three environmental samples and the suspected source sample S2. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. ASRM case insulation design and development

    NASA Astrophysics Data System (ADS)

    Bell, Matthew S.; Tam, William F. S.

    1992-10-01

    This paper describes the achievements made on the Advanced Solid Rocket Motor (ASRM) case insulation design and development program. The ASRM case insulation system described herein protects the metal case and joints from direct radiation and hot gas impingement. Critical failure of solid rocket systems is often traceable to failure of the insulation design. The wide ranging accomplishments included the development of a nonasbestos insulation material for ASRM that replaced the existing Redesigned Solid Rocket Motor (RSRM) asbestos-filled nitrile butadiene rubber (NBR) along with a performance gain of 300 pounds, and improved reliability of all the insulation joint designs, i.e., segmented case joint, case-to-nozzle and case-to-igniter joint. The insulation process development program included the internal stripwinding process. This process advancement allowed Aerojet to match to exceed the capability of other propulsion companies.

  14. ASRM case insulation design and development

    NASA Technical Reports Server (NTRS)

    Bell, Matthew S.; Tam, William F. S.

    1992-01-01

    This paper describes the achievements made on the Advanced Solid Rocket Motor (ASRM) case insulation design and development program. The ASRM case insulation system described herein protects the metal case and joints from direct radiation and hot gas impingement. Critical failure of solid rocket systems is often traceable to failure of the insulation design. The wide ranging accomplishments included the development of a nonasbestos insulation material for ASRM that replaced the existing Redesigned Solid Rocket Motor (RSRM) asbestos-filled nitrile butadiene rubber (NBR) along with a performance gain of 300 pounds, and improved reliability of all the insulation joint designs, i.e., segmented case joint, case-to-nozzle and case-to-igniter joint. The insulation process development program included the internal stripwinding process. This process advancement allowed Aerojet to match to exceed the capability of other propulsion companies.

  15. Low-cost housing design and provision: A case study of Kenya

    NASA Astrophysics Data System (ADS)

    Kabo, Felichism W.

    Shelter is as basic a human need as food and water. Today, many people in Third World countries live in sub-standard housing, or lack shelter altogether. Prior research addresses either one of two housing dimensions: broader provision processes, or specific aspects of design. This dissertation is an effort at addressing both dimensions, the underlying premise being that their inter-connectedness demands an integrative approach. More specifically, this dissertation is a combined strategy case study of housing design and provision in Kenya, a sub-Saharan African country with serious shelter problems. A majority of Kenya's urban population lives in slums or squatter settlements. This dissertation covers four major areas of housing design and provision in Kenya: building materials, user preferences for building materials and housing designs, interior layouts, and the organizational context of the housing sector. These four areas are theoretically unified by Canter's (1977) model of place. Each of the first three areas (housing design) relates to one or more of the three domains in the model. The fourth area (housing provision) pertains to the model's context and framework. The technical building materials research reveals the feasibility of making low-cost materials (soil-cements) with satisfactory engineering performance. The research in preference for building materials reveals that the two independent variables, soil and mix, have a significant effect on potential users' ratings. The housing preference study reveals that of the four independent variables, design and type had a significant effect on potential users' ratings, while materials and construction method did not have a significant effect. The interior layout studies reveal important associations between spatial configurations and a key space (the kitchen), and between configuration and conceptualizations of living, cooking, and sleeping spaces. The findings from the studies of preferences and interior

  16. Petroleum and hazardous material releases from industrial facilities associated with Hurricane Katrina.

    PubMed

    Santella, Nicholas; Steinberg, Laura J; Sengul, Hatice

    2010-04-01

    Hurricane Katrina struck an area dense with industry, causing numerous releases of petroleum and hazardous materials. This study integrates information from a number of sources to describe the frequency, causes, and effects of these releases in order to inform analysis of risk from future hurricanes. Over 200 onshore releases of hazardous chemicals, petroleum, or natural gas were reported. Storm surge was responsible for the majority of petroleum releases and failure of storage tanks was the most common mechanism of release. Of the smaller number of hazardous chemical releases reported, many were associated with flaring from plant startup, shutdown, or process upset. In areas impacted by storm surge, 10% of the facilities within the Risk Management Plan (RMP) and Toxic Release Inventory (TRI) databases and 28% of SIC 1311 facilities experienced accidental releases. In areas subject only to hurricane strength winds, a lower fraction (1% of RMP and TRI and 10% of SIC 1311 facilities) experienced a release while 1% of all facility types reported a release in areas that experienced tropical storm strength winds. Of industrial facilities surveyed, more experienced indirect disruptions such as displacement of workers, loss of electricity and communication systems, and difficulty acquiring supplies and contractors for operations or reconstruction (55%), than experienced releases. To reduce the risk of hazardous material releases and speed the return to normal operations under these difficult conditions, greater attention should be devoted to risk-based facility design and improved prevention and response planning.

  17. Can the Army Provide Bulk Petroleum Support to Joint Force 2020?

    DTIC Science & Technology

    2013-03-01

    Petroleum Officer (JPO) and one or more Sub Area Petroleum Officers ( SAPO ). The JPO coordinates petroleum support to all forces in a theater on behalf...position is the SAPO , established by the Combatant Commander or a Joint Force Commander (JFC) to fulfill bulk petroleum planning and execution in a...section of the theater for which the JPO is responsible.7 A key duty of the SAPO is to advise the JFC and his/her staff on petroleum logistics

  18. What Cognitive Science May Learn from Instructional Design: A Case Study in Introductory Computer Programming.

    ERIC Educational Resources Information Center

    van Merrienboer, Jeroen J. G.

    The contributions of instructional design to cognitive science are discussed. It is argued that both sciences have their own object of study, but share a common interest in human cognition and performance as part of instructional systems. From a case study based on experience in teaching introductory computer programming, it is concluded that both…

  19. Practical Advances in Petroleum Processing

    NASA Astrophysics Data System (ADS)

    Hsu, Chang S.; Robinson, Paul R.

    "This comprehensive book by Robinson and Hsu will certainly become the standard text book for the oil refining business...[A] must read for all who are associated with oil refining." - Dr. Walter Fritsch, Senior Vice President Refining, OMV "This book covers a very advanced horizon of petroleum processing technology. For all refiners facing regional and global environmental concerns, and for those who seek a more sophisticated understanding of the refining of petroleum resources, this book has been long in coming." - Mr. Naomasa Kondo, Cosmo Oil Company, Ltd.

  20. Bias correction of risk estimates in vaccine safety studies with rare adverse events using a self-controlled case series design.

    PubMed

    Zeng, Chan; Newcomer, Sophia R; Glanz, Jason M; Shoup, Jo Ann; Daley, Matthew F; Hambidge, Simon J; Xu, Stanley

    2013-12-15

    The self-controlled case series (SCCS) method is often used to examine the temporal association between vaccination and adverse events using only data from patients who experienced such events. Conditional Poisson regression models are used to estimate incidence rate ratios, and these models perform well with large or medium-sized case samples. However, in some vaccine safety studies, the adverse events studied are rare and the maximum likelihood estimates may be biased. Several bias correction methods have been examined in case-control studies using conditional logistic regression, but none of these methods have been evaluated in studies using the SCCS design. In this study, we used simulations to evaluate 2 bias correction approaches-the Firth penalized maximum likelihood method and Cordeiro and McCullagh's bias reduction after maximum likelihood estimation-with small sample sizes in studies using the SCCS design. The simulations showed that the bias under the SCCS design with a small number of cases can be large and is also sensitive to a short risk period. The Firth correction method provides finite and less biased estimates than the maximum likelihood method and Cordeiro and McCullagh's method. However, limitations still exist when the risk period in the SCCS design is short relative to the entire observation period.

  1. Non-Petroleum Oils

    EPA Pesticide Factsheets

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  2. A GHS-consistent approach to health hazard classification of petroleum substances, a class of UVCB substances.

    PubMed

    Clark, Charles R; McKee, Richard H; Freeman, James J; Swick, Derek; Mahagaokar, Suneeta; Pigram, Glenda; Roberts, Linda G; Smulders, Chantal J; Beatty, Patrick W

    2013-12-01

    The process streams refined from petroleum crude oil for use in petroleum products are among those designated by USEPA as UVCB substances (unknown or variable composition, complex reaction products and biological materials). They are identified on global chemical inventories with unique Chemical Abstract Services (CAS) numbers and names. The chemical complexity of most petroleum substances presents challenges when evaluating their hazards and can result in differing evaluations due to the varying level of hazardous constituents and differences in national chemical control regulations. Global efforts to harmonize the identification of chemical hazards are aimed at promoting the use of consistent hazard evaluation criteria. This paper discusses a systematic approach for the health hazard evaluation of petroleum substances using chemical categories and the United Nations (UN) Globally Harmonized System (GHS) of classification and labeling. Also described are historical efforts to characterize the hazard of these substances and how they led to the development of categories, the identification of potentially hazardous constituents which should be considered, and a summary of the toxicology of the major petroleum product groups. The use of these categories can increase the utility of existing data, provide better informed hazard evaluations, and reduce the amount of animal testing required. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  3. Virtual patients: the influence of case design and teamwork on students’ perception and knowledge – a pilot study

    PubMed Central

    2014-01-01

    Background Virtual patient (VP) cases are an effective teaching method, although little is known about how to design and implement them for maximum effectiveness. The aim of this study was to explore the effect of case design and teamwork on students’ learning outcome. Methods One hundred forty-six undergraduate medical students participated in a mandatory medical computer science course consisting of five seminars. At the end of each seminar, they worked on one VP case, either in teams of two or individually. Each student filled out an introductory and a final survey and a feedback sheet after completing each case. Additionally, there was a surprise multiple choice (MC) test after the last seminar with three questions regarding each case. Results Students with more clinical experience and students who had worked in a team performed significantly better on MC questions. Students with less clinical experience more frequently used information which had been positioned less prominently on the case material. Certain aspects of case design were rated more positively by students who had an interest in e-learning. In general, students preferred to work on cases for less than 15 minutes. Conclusions Clinically more advanced students and students working with a partner seem to benefit most from short VP cases with prominently presented information. PMID:25000965

  4. The Role of Re-Appropriation in Open Design: A Case Study on How Openness in Higher Education for Industrial Design Engineering Can Trigger Global Discussions on the Theme of Urban Gardening

    ERIC Educational Resources Information Center

    Ostuzzi, Francesca; Conradie, Peter; De Couvreur, Lieven; Detand, Jan; Saldien, Jelle

    2016-01-01

    This case study explores the opportunities for students of Industrial Design Engineering to engage with direct and indirect stakeholders by making their design process and results into open-ended designed solutions. The reported case study involved 47 students during a two-weeks intensive course on the topic of urban gardening. Observations were…

  5. Taxation, depletion, and welfare: A simulation study of the US petroleum resource

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Deacon, R.T.

    1993-03-01

    Exhaustible resources in the United States are subject to taxes on property value, production, and corporate income. As applied in practice each tax can cause high-grading - the elimination of incentives to explore, develop, and produce marginal resources - and each can tilt the time path of production toward the present or the future. The potential for such tax-induced distortions has been shown in the theoretical literature. Due to the dynamic nature of resource exploitation and the resulting complexity of models developed to study it, however, purely theoretical exercises have been unable to provide detailed results of a sort thatmore » could help guide tax policy. The present paper develops a simulation model of the US petroleum resource and uses it to study the effects of taxation on exploration and production. The model is partial equilibrium in scope and views the industry as a present value maximizing representative firm. Given expectations on the future time path of price, and a function that relates reserve additions to exploratory effort, the industry chooses time paths for exploration and production. Parameters of relevant functions are estimated with data for US petroleum operations in the onshore region of the lower 48 states. The simulated outcomes indicate that property and production (severance) taxes cause substantial deadweight losses, a tax on corporate income from extraction imposes a very small deadweight loss, and the property tax significantly biases utilization of the resource away from the future and toward the present. 33 refs., 6 figs., 3 tabs.« less

  6. Alaskan North Slope petroleum systems

    USGS Publications Warehouse

    Magoon, L.B.; Lillis, P.G.; Bird, K.J.; Lampe, C.; Peters, K.E.

    2003-01-01

    Six North Slope petroleum systems are identified, described, and mapped using oil-to-oil and oil-to-source rock correlations, pods of active source rock, and overburden rock packages. To map these systems, we assumed that: a) petroleum source rocks contain 3.2 wt. % organic carbon (TOC); b) immature oil-prone source rocks have hydrogen indices (HI) >300 (mg HC/gm TOC); c) the top and bottom of the petroleum (oil plus gas) window occur at vitrinite reflectance values of 0.6 and 1.0% Ro, respectively; and d) most hydrocarbons are expelled within the petroleum window. The six petroleum systems we have identified and mapped are: a) a southern system involving the Kuna-Lisburne source rock unit that was active during the Late Jurassic and Early Cretaceous; b) two western systems involving source rock in the Kingak-Blankenship, and GRZ-lower Torok source rock units that were active during the Albian; and c) three eastern systems involving the Shublik-Otuk, Hue Shale and Canning source rock units that were active during the Cenozoic. The GRZ-lower Torok in the west is correlative with the Hue Shale to the east. Four overburden rock packages controlled the time of expulsion and gross geometry of migration paths: a) a southern package of Early Cretaceous and older rocks structurally-thickened by early Brooks Range thrusting; b) a western package of Early Cretaceous rocks that filled the western part of the foreland basin; c) an eastern package of Late Cretaceous and Paleogene rocks that filled the eastern part of the foreland basin; and d) an offshore deltaic package of Neogene rocks deposited by the Colville, Canning, and Mackenzie rivers. This petroleum system poster is part of a series of Northern Alaska posters on modeling. The poster in this session by Saltus and Bird present gridded maps for the greater Northern Alaskan onshore and offshore that are used in the 3D modeling poster by Lampe and others. Posters on source rock units are by Keller and Bird as well as

  7. Regulatory overkill and the petroleum industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    DiBona, C.J.

    1975-12-01

    The petroleum industry is one of the most heavily regulated industries in the U.S. Federal regulations as of August 31, 1975 could dictate on exploration, locating pipelines, siting of refineries, what products to make, to whom to sell (and where), in what quantities, and at what price for the products. The author believes these regulations along with the local county and state regulations have reduced the efficiency and effectiveness of the petroleum industry. The industry feels that regulations have gone too far and that it is now in the phase of ''regulatory overkill.'' In the short run it may bemore » possible to redistribute income from producers to consumers via price controls. But the long-run effects inevitably are fewer domestic petroleum reserves and less production. (MCW)« less

  8. Petroleum Market Model of the National Energy Modeling System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-01-01

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions. The production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcoholsmore » and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level. This report is organized as follows: Chapter 2, Model Purpose; Chapter 3, Model Overview and Rationale; Chapter 4, Model Structure; Appendix A, Inventory of Input Data, Parameter Estimates, and Model Outputs; Appendix B, Detailed Mathematical Description of the Model; Appendix C, Bibliography; Appendix D, Model Abstract; Appendix E, Data Quality; Appendix F, Estimation methodologies; Appendix G, Matrix Generator documentation; Appendix H, Historical Data Processing; and Appendix I, Biofuels Supply Submodule.« less

  9. Interior Design Supports Art Education: A Case Study

    ERIC Educational Resources Information Center

    Clemons, Stephanie A.

    2006-01-01

    Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

  10. Substitution for petroleum products in Brasil: Urgent issues

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    de Araujo, J.L.; Ghirardi, A.

    Brazililan energy policy during the last decade has focused on the replacement of imported petroleum with domestic energy sources, combined with efforts at conservation. The substitution results, however, have been more spectacular by far. The strategy of replacement is based on two elements. first, to increase domestic petroleum exploration and production. Second, to promote non-petroleum fuels as alternatives to the industrial and transportation sectors, for the substitution of fuel oil and gasoline, respectively. A combination of the substitution strategy, the country's petroleum refining structure, and the composition of the substitution strategy, the country's petroleum refining structure, and the composition ofmore » demand, has resulted in large surpluses of both gasoline and fuel oil, while diesel has become the most used among petroleum products. The surpluses are not easily exportable because there is ample availability of fuel oil in the world market, and because the low octane number of the gasoline produced in Brasil is not compatible with the engines of cars elsewhere in the region and in the world. Furthermore, although gasoline might be upgraded, the question remains that prospects for the world market are not encouraging, and an export-based strategy does not seem justified in view of the growing surpluses. The objective of this analysis is to review the mechanisms of themajor petroleum-substitution programs currently in existence, identifying their past impact on the energy market and the possible consequences of changes in the goals and operating conditions of these programs, in the light of the new prospects for increased domestic oil production and self-sufficiency. 23 refs., 2 figs., 1 tab.« less

  11. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... more than 125 seconds. 2711.11.0000 Natural gas, methane and mixtures thereof (including liquefied... Petroleum Reserves Production Act. 2 Natural gas and liquefied natural gas (LNG), and synthetic natural gas...

  12. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... more than 125 seconds. 2711.11.0000 Natural gas, methane and mixtures thereof (including liquefied... Petroleum Reserves Production Act. 2 Natural gas and liquefied natural gas (LNG), and synthetic natural gas...

  13. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... more than 125 seconds. 2711.11.0000 Natural gas, methane and mixtures thereof (including liquefied... Petroleum Reserves Production Act. 2 Natural gas and liquefied natural gas (LNG), and synthetic natural gas...

  14. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... more than 125 seconds. 2711.11.0000 Natural gas, methane and mixtures thereof (including liquefied... Petroleum Reserves Production Act. 2 Natural gas and liquefied natural gas (LNG), and synthetic natural gas...

  15. 15 CFR Supplement No. 1 to Part 754 - Petroleum and Petroleum Products

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... more than 125 seconds. 2711.11.0000 Natural gas, methane and mixtures thereof (including liquefied... Petroleum Reserves Production Act. 2 Natural gas and liquefied natural gas (LNG), and synthetic natural gas...

  16. Total petroleum systems of the Illizi Province, Algeria and Libya; Tanezzuft-Illizi

    USGS Publications Warehouse

    Klett, T.R.

    2000-01-01

    Undiscovered conventional oil and gas resources were assessed within a total petroleum system of the Illizi Province (2056) as part of the U.S. Geological Survey World Petroleum Assessment 2000. The Illizi Province is in eastern Algeria and a small portion of western Libya. The province and its total petroleum system coincide with the Illizi Basin. Although several total petroleum systems may exist within the Illizi Province, only one “composite” total petroleum system is identified. This total petroleum system comprises a single assessment unit. The main source rocks are the Silurian Tanezzuft Formation (or lateral equivalents) and Middle to Upper Devonian mudstone. The total petroleum system was named after the oldest major source rock and the basin in which it resides. The estimated means of the undiscovered conventional petroleum volumes in the Tanezzuft-Illizi Total Petroleum System are 2,814 million barrels of oil (MMBO), 27,785 billion cubic feet of gas (BCFG), and 873 million barrels of natural gas liquids (MMBNGL).

  17. Alternative Fuels Data Center: City of Chicago Program Encourages Petroleum

    Science.gov Websites

    Displacement and Collaboration Between Departments City of Chicago Program Encourages Petroleum : City of Chicago Program Encourages Petroleum Displacement and Collaboration Between Departments on Facebook Tweet about Alternative Fuels Data Center: City of Chicago Program Encourages Petroleum

  18. Waiting list randomized controlled trial within a case-finding design: methodological considerations.

    PubMed

    Ronaldson, Sarah; Adamson, Joy; Dyson, Lisa; Torgerson, David

    2014-10-01

    Randomized controlled trials (RCTs) are widely used in health care research to provide high-quality evidence of effectiveness of an intervention. However, sometimes a study does not require an RCT in order to answer its primary objective; a case-finding design may be more appropriate. The aim of this paper was to introduce a new study design that nests a waiting list RCT within a case-finding study. An example of the new study design is the DOC Study, which primarily aims to determine the diagnostic accuracy of lung function tests for chronic obstructive pulmonary disease. It also investigates the impact of lung function tests on smoking behaviour through use of a waiting list design. The first step of the study design is to obtain participants' consent. Individuals are then randomized to one of two groups; either the 'intervention now' group or the 'intervention later' group, that is, participants are placed on a waiting list. All participants receive the same intervention; the only difference between the groups is the timing of the intervention. The design addresses patient preference issues and recruitment issues that can arise in other trial designs. Potential limitations include differential attrition between study groups and potential demoralization for the 'intervention later' group. The 'waiting list case-finding trial' design is a valuable method that could be applied to case-finding studies; the design enables the case-finding component of a study to be maintained while simultaneously exploring additional hypotheses through conducting a trial. © 2014 John Wiley & Sons, Ltd.

  19. Marginal Structural Models for Case-Cohort Study Designs to Estimate the Association of Antiretroviral Therapy Initiation With Incident AIDS or Death

    PubMed Central

    Cole, Stephen R.; Hudgens, Michael G.; Tien, Phyllis C.; Anastos, Kathryn; Kingsley, Lawrence; Chmiel, Joan S.; Jacobson, Lisa P.

    2012-01-01

    To estimate the association of antiretroviral therapy initiation with incident acquired immunodeficiency syndrome (AIDS) or death while accounting for time-varying confounding in a cost-efficient manner, the authors combined a case-cohort study design with inverse probability-weighted estimation of a marginal structural Cox proportional hazards model. A total of 950 adults who were positive for human immunodeficiency virus type 1 were followed in 2 US cohort studies between 1995 and 2007. In the full cohort, 211 AIDS cases or deaths occurred during 4,456 person-years. In an illustrative 20% random subcohort of 190 participants, 41 AIDS cases or deaths occurred during 861 person-years. Accounting for measured confounders and determinants of dropout by inverse probability weighting, the full cohort hazard ratio was 0.41 (95% confidence interval: 0.26, 0.65) and the case-cohort hazard ratio was 0.47 (95% confidence interval: 0.26, 0.83). Standard multivariable-adjusted hazard ratios were closer to the null, regardless of study design. The precision lost with the case-cohort design was modest given the cost savings. Results from Monte Carlo simulations demonstrated that the proposed approach yields approximately unbiased estimates of the hazard ratio with appropriate confidence interval coverage. Marginal structural model analysis of case-cohort study designs provides a cost-efficient design coupled with an accurate analytic method for research settings in which there is time-varying confounding. PMID:22302074

  20. Large-Scale Wireless Temperature Monitoring System for Liquefied Petroleum Gas Storage Tanks

    PubMed Central

    Fan, Guangwen; Shen, Yu; Hao, Xiaowei; Yuan, Zongming; Zhou, Zhi

    2015-01-01

    Temperature distribution is a critical indicator of the health condition for Liquefied Petroleum Gas (LPG) storage tanks. In this paper, we present a large-scale wireless temperature monitoring system to evaluate the safety of LPG storage tanks. The system includes wireless sensors networks, high temperature fiber-optic sensors, and monitoring software. Finally, a case study on real-world LPG storage tanks proves the feasibility of the system. The unique features of wireless transmission, automatic data acquisition and management, local and remote access make the developed system a good alternative for temperature monitoring of LPG storage tanks in practical applications. PMID:26393596

  1. Large-Scale Wireless Temperature Monitoring System for Liquefied Petroleum Gas Storage Tanks.

    PubMed

    Fan, Guangwen; Shen, Yu; Hao, Xiaowei; Yuan, Zongming; Zhou, Zhi

    2015-09-18

    Temperature distribution is a critical indicator of the health condition for Liquefied Petroleum Gas (LPG) storage tanks. In this paper, we present a large-scale wireless temperature monitoring system to evaluate the safety of LPG storage tanks. The system includes wireless sensors networks, high temperature fiber-optic sensors, and monitoring software. Finally, a case study on real-world LPG storage tanks proves the feasibility of the system. The unique features of wireless transmission, automatic data acquisition and management, local and remote access make the developed system a good alternative for temperature monitoring of LPG storage tanks in practical applications.

  2. Occupational medicine in a developing society: a case study of Venezuela.

    PubMed

    Guidotti, T L; Goldsmith, D F

    1980-01-01

    Recent activities of the World Health Organization and other international agencies have placed new emphasis on occupational health in developing nations. Venezuela is a nation in transition from a developing society dominated economically by petroleum and agriculture to an economically-diversified industrialized urban society. It provides a case study which illuminates the problems of extending occupational health services in developing economies and questions of public policy regarding utilization of medical resources and the priority that occupational health should hold in such a society. Occupational health has become a serious problem in the developing world as new industries and accelerating ecnomic development occur without adequate resources for worker protection. The study of cases such as that of Venezuela may provide guidance for anticipating and preventing problems in other nations. This paper should be considered a pilot study to explore a social aspect of occupational health that has not received adequate attention.

  3. Guam Transportation Petroleum-Use Reduction Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, C.

    2013-04-01

    The island of Guam has set a goal to reduce petroleum use 20% by 2020. Because transportation is responsible for one-third of on-island petroleum use, the Guam Energy Task Force (GETF), a collaboration between the U.S. Department of Energy and numerous Guam-based agencies and organizations, devised a specific plan by which to meet the 20% goal within the transportation sector. This report lays out GETF's plan.

  4. A Case Study on Collective Cognition and Operation in Team-Based Computer Game Design by Middle-School Children

    ERIC Educational Resources Information Center

    Ke, Fengfeng; Im, Tami

    2014-01-01

    This case study examined team-based computer-game design efforts by children with diverse abilities to explore the nature of their collective design actions and cognitive processes. Ten teams of middle-school children, with a high percentage of minority students, participated in a 6-weeks, computer-assisted math-game-design program. Essential…

  5. Life cycle design metrics for energy generation technologies: Method, data, and case study

    NASA Astrophysics Data System (ADS)

    Cooper, Joyce; Lee, Seung-Jin; Elter, John; Boussu, Jeff; Boman, Sarah

    A method to assist in the rapid preparation of Life Cycle Assessments of emerging energy generation technologies is presented and applied to distributed proton exchange membrane fuel cell systems. The method develops life cycle environmental design metrics and allows variations in hardware materials, transportation scenarios, assembly energy use, operating performance and consumables, and fuels and fuel production scenarios to be modeled and comparisons to competing systems to be made. Data and results are based on publicly available U.S. Life Cycle Assessment data sources and are formulated to allow the environmental impact weighting scheme to be specified. A case study evaluates improvements in efficiency and in materials recycling and compares distributed proton exchange membrane fuel cell systems to other distributed generation options. The results reveal the importance of sensitivity analysis and system efficiency in interpreting case studies.

  6. Better cancer biomarker discovery through better study design.

    PubMed

    Rundle, Andrew; Ahsan, Habibul; Vineis, Paolo

    2012-12-01

    High-throughput laboratory technologies coupled with sophisticated bioinformatics algorithms have tremendous potential for discovering novel biomarkers, or profiles of biomarkers, that could serve as predictors of disease risk, response to treatment or prognosis. We discuss methodological issues in wedding high-throughput approaches for biomarker discovery with the case-control study designs typically used in biomarker discovery studies, especially focusing on nested case-control designs. We review principles for nested case-control study design in relation to biomarker discovery studies and describe how the efficiency of biomarker discovery can be effected by study design choices. We develop a simulated prostate cancer cohort data set and a series of biomarker discovery case-control studies nested within the cohort to illustrate how study design choices can influence biomarker discovery process. Common elements of nested case-control design, incidence density sampling and matching of controls to cases are not typically factored correctly into biomarker discovery analyses, inducing bias in the discovery process. We illustrate how incidence density sampling and matching of controls to cases reduce the apparent specificity of truly valid biomarkers 'discovered' in a nested case-control study. We also propose and demonstrate a new case-control matching protocol, we call 'antimatching', that improves the efficiency of biomarker discovery studies. For a valid, but as yet undiscovered, biomarker(s) disjunctions between correctly designed epidemiologic studies and the practice of biomarker discovery reduce the likelihood that true biomarker(s) will be discovered and increases the false-positive discovery rate. © 2012 The Authors. European Journal of Clinical Investigation © 2012 Stichting European Society for Clinical Investigation Journal Foundation.

  7. Developing Tools to Counteract and Prevent Suicide Bomber Incidents: A Case Study in Value Sensitive Design.

    PubMed

    Royakkers, Lambèr; Steen, Marc

    2017-08-01

    Developers and designers make all sorts of moral decisions throughout an innovation project. In this article, we describe how teams of developers and designers engaged with ethics in the early phases of innovation based on case studies in the SUBCOP project (SUBCOP stands for 'SUicide Bomber COunteraction and Prevention'). For that purpose, Value Sensitive Design (VSD) will be used as a reference. Specifically, we focus on the following two research questions: How can researchers/developers learn about users' perspectives and values during the innovation process? and How can researchers/developers take into account these values, and related design criteria, in their decision-making during the innovation process? Based on a case study of several innovation processes in this project, we conclude the researchers/developers involved are able to do something similar to VSD (without them knowing about VSD or calling it 'VSD'), supported by relatively simple exercises in the project, e.g., meetings with potential end-users and discussions with members of the Ethical Advisory Board of the project. Furthermore, we also found-possibly somewhat counterintuitively-that a commercial, with its focus on understanding and satisfying customers' needs, can promote VSD.

  8. The United Nations Framework Classification for World Petroleum Resources

    USGS Publications Warehouse

    Ahlbrandt, T.S.; Blystad, P.; Young, E.D.; Slavov, S.; Heiberg, S.

    2003-01-01

    The United Nations has developed an international framework classification for solid fuels and minerals (UNFC). This is now being extended to petroleum by building on the joint classification of the Society of Petroleum Engineers (SPE), the World Petroleum Congresses (WPC) and the American Association of Petroleum Geologists (AAPG). The UNFC is a 3-dimansional classification. This: Is necessary in order to migrate accounts of resource quantities that are developed on one or two of the axes to the common basis; Provides for more precise reporting and analysis. This is particularly useful in analyses of contingent resources. The characteristics of the SPE/WPC/AAPG classification has been preserved and enhanced to facilitate improved international and national petroleum resource management, corporate business process management and financial reporting. A UN intergovernmental committee responsible for extending the UNFC to extractive energy resources (coal, petroleum and uranium) will meet in Geneva on October 30th and 31st to review experiences gained and comments received during 2003. A recommended classification will then be delivered for consideration to the United Nations through the Committee on Sustainable Energy of the Economic Commission for Europe (UN ECE).

  9. Petroleum generation and migration in the Mesopotamian Basin and Zagros fold belt of Iraq: Results from a basin-modeling study

    USGS Publications Warehouse

    Pitman, Janet K.; Steinshouer, D.; Lewan, M.D.

    2004-01-01

    A regional 3-D total petroleum-system model was developed to evaluate petroleum generation and migration histories in the Mesopotamian Basin and Zagros fold belt in Iraq. The modeling was undertaken in conjunction with Middle East petroleum assessment studies conducted by the USGS. Regional structure maps, isopach and facies maps, and thermal maturity data were used as input to the model. The oil-generation potential of Jurassic source-rocks, the principal known source of the petroleum in Jurassic, Cretaceous, and Tertiary reservoirs in these regions, was modeled using hydrous pyrolysis (Type II-S) kerogen kinetics. Results showed that oil generation in source rocks commenced in the Late Cretaceous in intrashelf basins, peak expulsion took place in the late Miocene and Pliocene when these depocenters had expanded along the Zagros foredeep trend, and generation ended in the Holocene when deposition in the foredeep ceased. The model indicates that, at present, the majority of Jurassic source rocks in Iraq have reached or exceeded peak oil generation and most rocks have completed oil generation and expulsion. Flow-path simulations demonstrate that virtually all oil and gas fields in the Mesopotamian Basin and Zagros fold belt overlie mature Jurassic source rocks (vertical migration dominated) and are situated on, or close to, modeled migration pathways. Fields closest to modeled pathways associated with source rocks in local intrashelf basins were charged earliest from Late Cretaceous through the middle Miocene, and other fields filled later when compression-related traps were being formed. Model results confirm petroleum migration along major, northwest-trending folds and faults, and oil migration loss at the surface.

  10. Characteristics of petroleum contaminants and their distribution in Lake Taihu, China.

    PubMed

    Guo, Jixiang; Fang, Jia; Cao, Jingjing

    2012-08-31

    Taihu Lake is a typical plain eutrophic shallow lake. With rapidly economic development of the lake area, the petroleum products and oil wastewater produced in various processes have been inevitably discharged into Taihu Lake. As the major fresh water resource in the economically developed region of Yangtze River Delta, the water quality and environmental condition of Taihu Lake have the direct bearing on the natural environment and sustainable development of economy in this region. For this reason we carried out the study to explore the composition, distribution characteristics and sources of petroleum contaminants in Taihu Lake. The aim of this study was to provide the basis for standard management and pollution control of the Taihu Lake environment. The result showed that water samples from near industrial locations were of relatively higher petroleum contaminants concentrations. The oil pollutants concentrations in different areas of Lake Taihu ranged from 0.106 mg/L to 1.168 mg/L, and the sequence of total contents distribution characteristics of petroleum pollutants from high to low in different regions of Taihu Lake was: "Dapu", "Xiaomeikou", "Zhushan Bay", "Lake center", "Qidu". The results showed that total concentrations of n-alkanes and PAHs ranged from 0.045 to 0.281 mg/L and from 0.011 to 0.034 mg/L respectively. In the same region, the concentrations of hydrocarbon pollutants in the surface and bottom of the lake were higher than that in the middle. This paper reached a conclusion that the petroleum contaminants in Taihu Lake mainly derived from petroleum pollution caused by human activities as indicated by OEP, bimodal distribution, CPI, Pr/Ph ratio, the LMW/HMW ratio and other evaluation indices for sources of n-alkanes and polycyclic aromatic hydrocarbons (PAHs).

  11. A comparison of Cox and logistic regression for use in genome-wide association studies of cohort and case-cohort design.

    PubMed

    Staley, James R; Jones, Edmund; Kaptoge, Stephen; Butterworth, Adam S; Sweeting, Michael J; Wood, Angela M; Howson, Joanna M M

    2017-06-01

    Logistic regression is often used instead of Cox regression to analyse genome-wide association studies (GWAS) of single-nucleotide polymorphisms (SNPs) and disease outcomes with cohort and case-cohort designs, as it is less computationally expensive. Although Cox and logistic regression models have been compared previously in cohort studies, this work does not completely cover the GWAS setting nor extend to the case-cohort study design. Here, we evaluated Cox and logistic regression applied to cohort and case-cohort genetic association studies using simulated data and genetic data from the EPIC-CVD study. In the cohort setting, there was a modest improvement in power to detect SNP-disease associations using Cox regression compared with logistic regression, which increased as the disease incidence increased. In contrast, logistic regression had more power than (Prentice weighted) Cox regression in the case-cohort setting. Logistic regression yielded inflated effect estimates (assuming the hazard ratio is the underlying measure of association) for both study designs, especially for SNPs with greater effect on disease. Given logistic regression is substantially more computationally efficient than Cox regression in both settings, we propose a two-step approach to GWAS in cohort and case-cohort studies. First to analyse all SNPs with logistic regression to identify associated variants below a pre-defined P-value threshold, and second to fit Cox regression (appropriately weighted in case-cohort studies) to those identified SNPs to ensure accurate estimation of association with disease.

  12. Petroleum hydrocarbon pollution of urban topsoil in Ibadan city, Nigeria

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Onianwa, P.C.

    The distribution of total petroleum hydrocarbon in topsoils from various parts of Ibadan city, Nigeria, was studied. Samples were selected from around the following zones: (a) railway tracks, (b) petrol stations, (c) refuse dumps, (d) residential areas, (e) high traffic density areas, (f) mechanical workshops, and (g) control zones. Contamination of the topsoil with hydrocarbons was significant only around petrol stations and mechanical workshops where the factors of accumulation were 10.1 and 4.72, respectively. The general trend in hydrocarbon levels was petrol station > mechanical workshop > refuse dumps > high traffic areas {ge} rail tracks > control residential areas.more » The results highlight the need to monitor urban environments that are remote from petroleum exploration activities for petroleum hydrocarbon contamination. 19 refs., 3 tabs.« less

  13. Petroleum Market Model of the National Energy Modeling System. Part 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcoholsmore » and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.« less

  14. Natural analogs in the petroleum industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wood, J.R.

    1995-09-01

    This article describes the use of natural analogues in petroleum exploration and includes numerous geologic model descriptions which have historically been used in the prediction of geometries and location of oil and gas accumulations. These geologic models have been passed down to and used by succeeding generations of petroleum geologists. Some examples of these geologic models include the Allan fault-plane model, porosity prediction, basin modelling, prediction of basin compartmentalization, and diagenesis.

  15. 15 CFR 754.3 - Petroleum products not including crude oil.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Petroleum products not including crude... SUPPLY CONTROLS § 754.3 Petroleum products not including crude oil. (a) License requirement. As indicated... required to all destinations, including Canada, for the export of petroleum products, excluding crude oil...

  16. 15 CFR 754.3 - Petroleum products not including crude oil.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum products not including crude... SUPPLY CONTROLS § 754.3 Petroleum products not including crude oil. (a) License requirement. As indicated... required to all destinations, including Canada, for the export of petroleum products, excluding crude oil...

  17. 46 CFR 105.45-1 - Loading or dispensing petroleum products.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Loading or dispensing petroleum products. 105.45-1... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Special Operating Requirements § 105.45-1 Loading or dispensing petroleum products. (a) A commercial fishing vessel must have aboard a letter of...

  18. 46 CFR 105.45-1 - Loading or dispensing petroleum products.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Loading or dispensing petroleum products. 105.45-1... VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Special Operating Requirements § 105.45-1 Loading or dispensing petroleum products. (a) A commercial fishing vessel must have aboard a letter of...

  19. Petroleum Scarcity and Public Health: Considerations for Local Health Departments

    PubMed Central

    Parker, Cindy L.; Caine, Virginia A.; McKee, Mary; Shirley, Lillian M.; Links, Jonathan M.

    2011-01-01

    Recognition of petroleum as a finite global resource has spurred increasing interest in the intersection between petroleum scarcity and public health. Local health departments represent a critical yet highly vulnerable component of the public health infrastructure. These frontline agencies currently face daunting resource constraints and rely heavily on petroleum for vital population-based health services. Against this backdrop, petroleum scarcity may necessitate reconfiguring local public health service approaches. We describe the anticipated impacts of petroleum scarcity on local health departments, recommend the use of the 10 Essential Public Health Services as a framework for examining attendant operational challenges and potential responses to them, and describe approaches that local health departments and their stakeholders could consider as part of timely planning efforts. PMID:21778471

  20. Methodological Issues in Design and Analysis of a Matched Case-Control Study of a Vaccine’s Effectiveness

    PubMed Central

    Niccolai, Linda M.; Ogden, Lorraine G.; Muehlenbein, Catherine E.; Dziura, James D.; Vázquez, Marietta; Shapiro, Eugene D.

    2007-01-01

    Objective Case-control studies of the effectiveness of a vaccine are useful to answer important questions, such as the effectiveness of a vaccine over time, that usually are not addressed by pre-licensure clinical trials of the vaccine’s efficacy. This report describes methodological issues related to design and analysis that were used to determine the effects of time since vaccination and age at the time of vaccination. Study Design and Setting A matched case-control study of the effectiveness of varicella vaccine. Results Sampling procedures and conditional logistic regression models including interaction terms are described. Conclusion Use of these methods will allow investigators to assess the effects of a wide range of variables, such as time since vaccination and age at the time of vaccination, on the effectiveness of a vaccine. PMID:17938054

  1. Petroleum Release Assessment and Impacts of Weather Extremes

    EPA Science Inventory

    Contaminated ground water and vapor intrusion are two major exposure pathways of concern at petroleum release sites. EPA has recently developed a model for petroleum vapor intrusion, called PVIScreen, which incorporates variability and uncertainty in input parameters. This ap...

  2. Petroleum degradation by endophytic Streptomyces spp. isolated from plants grown in contaminated soil of southern Algeria.

    PubMed

    Baoune, Hafida; Ould El Hadj-Khelil, Aminata; Pucci, Graciela; Sineli, Pedro; Loucif, Lotfi; Polti, Marta Alejandra

    2018-01-01

    Petroleum hydrocarbons are well known by their high toxicity and recalcitrant properties. Their increasing utilization around worldwide led to environmental contamination. Phytoremediation using plant-associated microbe is an interesting approach for petroleum degradation and actinobacteria have a great potential for that. For this purpose, our study aimed to isolate, characterize, and assess the ability of endophytic actinobacteria to degrade crude petroleum, as well as to produce plant growth promoting traits. Seventeen endophytic actinobacteria were isolated from roots of plants grown naturally in sandy contaminated soil. Among them, six isolates were selected on the basis of their tolerance to petroleum on solid minimal medium and characterized by 16S rDNA gene sequencing. All petroleum-tolerant isolates belonged to the Streptomyces genus. Determination by crude oil degradation by gas chromatorgraph-flame ionization detector revealed that five strains could use petroleum as sole carbon and energy source and the petroleum removal achieved up to 98% after 7 days of incubation. These isolates displayed an important role in the degradation of the n-alkanes (C 6 -C 30 ), aromatic and polycyclic aromatic hydrocarbons. All strains showed a wide range of plant growth promoting features such as siderophores, phosphate solubilization, 1-aminocyclopropane-1-carboxylate deaminase, nitrogen fixation and indole-3-acetic acid production as well as biosurfactant production. This is the first study highlighting the petroleum degradation ability and plant growth promoting attributes of endophytic Streptomyces. The finding suggests that the endophytic actinobacteria isolated are promising candidates for improving phytoremediation efficiency of petroleum contaminated soil. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Effectiveness and mechanism of natural attenuation at a petroleum-hydrocarbon contaminated site.

    PubMed

    Lv, Hang; Su, Xiaosi; Wang, Yan; Dai, Zhenxue; Liu, Mingyao

    2018-05-07

    This study applied an integrated method for evaluating the effectiveness and mechanism of natural attenuation (NA) of petroleum-hydrocarbon contaminated groundwater. Site groundwater and soil samples were analysed to characterize spatial and temporal variations in petroleum hydrocarbons, geochemical indicators, microbial diversity and isotopes. The results showed that the area of petroleum hydrocarbon contamination plume decreased almost 60% in four years, indicating the presence of natural attenuation. The 14 C content and sequence analysis indicate that there are more relatively 'old' HCO 3 - that have been produced from petroleum hydrocarbons in the upgradient portion of the contaminated plume, confirming that intrinsic biodegradation was the major factor limiting spread of the contaminated plume. The main degradation mechanisms were identified as sulfate reduction and methanogenesis based on the following: (1) more SO 4 2- have been consumed in the contamination source than downgradient, and the δ 34 S values in the resident SO 4 2- were also more enriched in the contamination source, (2) production of more CH 4 in the contamination source with the δ 13 C values for CH 4 was much lower than that of CO 2 , and the fractionation factor was 1.030-1.046. The results of this study provide significant insight for applying natural attenuation and enhanced bioremediation as alternative options for remediation of petroleum-hydrocarbon contaminated sites. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Distribution, origin and prediction of carbon dioxide in petroleum reservoirs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thrasher, J.; Fleet, A.J.

    1995-08-01

    High concentrations of carbon dioxide (CO{sub 2}) in petroleum reservoirs can significantly reduce the value of the discovery, by diluting any hydrocarbons, and by increasing production costs because of the increased likelihood of corrosion and scale formation. Huge volumes of CO{sub 2} have been found, for example in the Indonesian Natuna d-Alpha structure (estimated 240 tcf gas, of which around 70% is CO{sub 2}). This study reviews the possible sources of CO{sub 2} in the petroleum system, and the geological and geochemical data from some CO{sub 2} {open_quotes}polluted{close_quotes} reservoirs, to improve future predictions of the exploration risk of finding significantmore » CO{sub 2}. A number of case studies show that the most common geological circumstances for the occurrence of high concentrations of CO{sub 2} include: carbonates associated with post-trap igneous activity (e.g. Ibleo Platform, Sicily); reservoir close to hot basement (e.g. Cooper-Eromanga Basin, Australia) and deep faults close to traps (e.g. Gulf of Thailand). Less common circumstances for high proportions of CO{sub 2} in gas include: post-trap igneous activity and coals (e.g. Taranaki, New Zealand) and reservoirs associated with pre-oil window coaly kerogen (e.g. Malay Trough), although the volumes of CO{sub 2} generated from kerogen are usually low relative to volumes of hydrocarbons generated from kerogen.« less

  5. 46 CFR 58.16-7 - Use of liquefied petroleum gas.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MACHINERY AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-7 Use of liquefied petroleum gas. (a) Cooking equipment using liquefied petroleum gas on vessels of 100 gross tons or more that carry passengers for hire must meet the requirements of this subpart. (b) Cooking equipment using...

  6. Classification of gravity-flow deposits and their significance for unconventional petroleum exploration, with a case study from the Triassic Yanchang Formation (southern Ordos Basin, China)

    NASA Astrophysics Data System (ADS)

    Fan, Aiping; Yang, Renchao; (Tom) van Loon, A. J.; Yin, Wei; Han, Zuozhen; Zavala, Carlos

    2018-08-01

    The ongoing exploration for shale oil and gas has focused sedimentological research on the transport and deposition mechanisms of fine-grained sediments, and more specifically on fine-grained mass-flow deposits. It appears, however, that no easily applicable classification scheme for gravity-flow deposits exists, and that such classifications almost exclusively deal with sandy and coarser sediments. Since the lack of a good classification system for fine-grained gravity flow deposits hampers scientific communication and understanding, we propose a classification scheme on the basis of the mud content in combination with the presumed transport mechanism. This results in twelve types of gravity-flow deposits. In order to show the practical applicability of this classification system, we apply it to the Triassic lacustrine Yanchang Formation in the southern Ordos Basin (China), which contains numerous slumps, debris-flows deposits, turbidites and hyperpycnites. The slumps and debrites occur mostly close to a delta front, and the turbidites and hyperpycnites extend over large areas from the delta slopes into the basin plain. The case study shows that (1) mud cannot only be transported but also deposited under active hydrodynamic conditions; (2) fine-grained gravity-flow constitute a significant part of the lacustrine mudstones and shales; (3) muddy gravity flows are important for the transport and deposition of clastic particles, clay minerals and organic matter, and thus are important mechanisms involved in the generation of hydrocarbons, also largely determining the reservoir capability for unconventional petroleum.

  7. Three-phase flow measurement in the petroleum industry

    NASA Astrophysics Data System (ADS)

    Thorn, R.; Johansen, G. A.; Hjertaker, B. T.

    2013-01-01

    The problem of how to accurately measure the flowrate of oil-gas-water mixtures in a pipeline remains one of the key challenges in the petroleum industry. This paper discusses why three-phase flow measurement is still important and why it remains a difficult problem to solve. The measurement strategies and principal base technologies currently used by commercial manufacturers are described, and research developments that could influence future flowmeter design are considered. Finally, future issues, which will need to be addressed by manufacturers and users of three-phase flowmeters, are discussed.

  8. Instructional Design, Facilitation, and Perceived Learning Outcomes: An Exploratory Case Study of a Human Trafficking MOOC for Attitudinal Change

    ERIC Educational Resources Information Center

    Watson, Sunnie Lee; Loizzo, Jamie; Watson, William R.; Mueller, Chad; Lim, Jieun; Ertmer, Peggy A.

    2016-01-01

    This exploratory case study describes the design and facilitation of a massive open online course (MOOC) for attitudinal change regarding human trafficking. It examines the course from the learners', instructor's, and instructional designer's perspectives. Two interviews with the instructor and instructional designer were conducted, and data from…

  9. Petroleum marketing monthly, April 1997 with data for January 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1997-04-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  10. Petroleum marketing monthly, January 1998 with data for October 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-01-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  11. A Case Study of Professors' and Instructional Designers' Experiences in the Development of Online Courses

    ERIC Educational Resources Information Center

    Stevens, Karl B.

    2012-01-01

    The purpose of this qualitative case study was to examine the experiences of instructional designers and professors during the online course development process and to determine if their experiences had an effect on the process itself. To gain an understanding of their experiences, open-ended interviews were conducted, seeking descriptions of…

  12. Potential for Electrified Vehicles to Contribute to U.S. Petroleum and Climate Goals and Implications for Advanced Biofuels.

    PubMed

    Meier, Paul J; Cronin, Keith R; Frost, Ethan A; Runge, Troy M; Dale, Bruce E; Reinemann, Douglas J; Detlor, Jennifer

    2015-07-21

    To examine the national fuel and emissions impacts from increasingly electrified light-duty transportation, we reconstructed the vehicle technology portfolios from two national vehicle studies. Using these vehicle portfolios, we normalized assumptions and examined sensitivity around the rates of electrified vehicle penetration, travel demand growth, and electricity decarbonization. We further examined the impact of substituting low-carbon advanced cellulosic biofuels in place of petroleum. Twenty-seven scenarios were benchmarked against a 50% petroleum-reduction target and an 80% GHG-reduction target. We found that with high rates of electrification (40% of miles traveled) the petroleum-reduction benchmark could be satisfied, even with high travel demand growth. The same highly electrified scenarios, however, could not satisfy 80% GHG-reduction targets, even assuming 80% decarbonized electricity and no growth in travel demand. Regardless of precise consumer vehicle preferences, emissions are a function of the total reliance on electricity versus liquid fuels and the corresponding greenhouse gas intensities of both. We found that at a relatively high rate of electrification (40% of miles and 26% by fuel), an 80% GHG reduction could only be achieved with significant quantities of low-carbon liquid fuel in cases with low or moderate travel demand growth.

  13. Job Creation and Petroleum Independence with E85 in Texas

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Walk, Steve

    Protec Fuel Management project objectives are to help design, build, provide, promote and supply biofuels for the greater energy independence, national security and domestic economic growth through job creations, infrastructure projects and supply chain business stimulants. Protec Fuel has teamed up with station owners to convert 5 existing retail fueling stations to include E85 fuel to service existing large number of fleet FFVs and general public FFVs. The stations are located in high flex fuel vehicle locations in the state of TX. Under the project name, “Job Creation and Petroleum Independence with E85 in Texas,” Protec Fuel identified and successfullymore » opened stations strategically located to maximize e85 fueling success for fleets and public. Protec Fuel and industry affiliates and FFV manufacturers are excited about these stations and the opportunities as they will help reduce emissions, increase jobs, economic stimulus benefits, energy independence and petroleum displacement.« less

  14. Incidence of Myelodysplastic Syndrome in UK Petroleum Distribution and Oil Refinery Workers, 1995–2011

    PubMed Central

    Sorahan, Tom; Mohammed, Nuredin

    2016-01-01

    The incidence of myelodysplastic syndrome (MDS) experienced by cohorts of 16,467 petroleum distribution workers and 28,554 oil refinery workers has been investigated. Study subjects were all those male employees first employed at one of 476 UK petroleum distribution centres or eight UK oil refineries in the period 1946–1974; all subjects had a minimum of twelve months employment with some employment after 1st January, 1951. Observed numbers (Obs) of MDS cases were compared with expectations based on national incidence rates for the period 1995–2011. The overall standardised registration ratio (SRR) was 73 (Obs = 17) in petroleum distribution workers for the age-range 15–84 years, and 77 (Obs = 21) for the age-range 15–99 years. The overall SRR was 81 (Obs = 29) in oil refinery workers for the age-range 15–84 years, and 83 (Obs = 36) for the age-range 15–99 years. More detailed analyses were carried out in terms of year of registration, period from hire, decade of hire, and duration of employment. The overall SRR findings did not provide clear evidence for the presence of an occupational cancer hazard, and provide no support for the hypothesis that low-level benzene exposure has an important effect on the risks of MDS. PMID:27164123

  15. [The regional context of migration: the case of Tabasco].

    PubMed

    Lezama, J L

    1991-09-01

    This work contains reflections on regional influences in determination of migratory processes, as distinct from economic and political influences at the national level. The relationship between migration and region implies discussion of the concept of regions and regional hierarchies in relation to the national level. The economic structure of a region and its influence on migration for example is related to characteristics of the same phenomenon at the national level. Migration to Mexico City and Monterrey represents a process of social change that affects all of Mexican society, both because of the regional diversity and large volume of migrants to the 2 cities and because of their importance in Mexico's economic and social development. Migration at the regional level may be determined by forces within that region or by processes at the national or even international level that are beyond local control. The particular mix of resources available in a region and the level of its development compared to other places within the nation strongly affect migratory potential. The concrete case of petroleum activity in the state of Tabasco is an example of the lack of participation at the regional level in design of investment policy. The petroleum boom of the 1960s in Tabasco produced profound economic changes in the region and caused changes in the local power structure. Particularities in the case of Tabasco included a state economy dominated by petroleum activity, deterioration in the agricultural sector accompanied by increased livestock raising, expansion of zones of population expulsion especially where livestock were most dominant, and consolidation of strong migratory flows toward the petroleum zones. External factors in the regional socioeconomic situation included the impacts generated by petroleum activity, while internal factors included the increasing importance of livestock and eclipse of agriculture even before the petroleum boom. Census and survey data

  16. 40 CFR 60.620 - Applicability and designation of affected facility.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Performance for Petroleum Dry Cleaners § 60.620 Applicability and designation of affected facility. (a) The provisions of this subpart are applicable to the following affected facilities located at a petroleum dry... pounds): Petroleum solvent dry cleaning dryers, washers, filters, stills, and settling tanks. (1) When...

  17. The Impact of School Design and Arrangement on Learning Experiences: A Case Study of an Architecturally Significant Elementary School

    ERIC Educational Resources Information Center

    Churchill, Deirdre Lyne

    2014-01-01

    This qualitative study examined the impact of architectural design and arrangement on the learning experiences of students. Specifically, it examined how school design and arrangement foster interactions and relationships among students and adults relevant to integral learning experiences. This case study was limited to the breadth of knowledge…

  18. Health Risk Assessment for Exposure to Benzene in Petroleum Refinery Environments

    PubMed Central

    Edokpolo, Benjamin; Yu, Qiming Jimmy; Connell, Des

    2015-01-01

    The health risk resulting from benzene exposure in petroleum refineries was calculated using data from the scientific literature from various countries throughout the world. The exposure data was collated into four scenarios from petroleum refinery environments and plotted as cumulative probability distributions (CPD) plots. Health risk was evaluated for each scenario using the Hazard Quotient (HQ) at 50% (CEXP50) and 95% (CEXP95) exposure levels. Benzene levels were estimated to pose a significant risk with HQ50 > 1 and HQ95 > 1 for workers exposed to benzene as base estimates for petroleum refinery workers (Scenario 1), petroleum refinery workers evaluated with personal samplers in Bulgarian refineries (Scenario 2B) and evaluated using air inside petroleum refineries in Bulgarian refineries (Scenario 3B). HQ50 < 1 were calculated for petroleum refinery workers with personal samplers in Italian refineries (Scenario 2A), air inside petroleum refineries (Scenario 3A) and air outside petroleum refineries (Scenario 4) in India and Taiwan indicating little possible adverse health effects. Also, HQ95 was < 1 for Scenario 4 however potential risk was evaluated for Scenarios 2A and 3A with HQ95 > 1. The excess Cancer risk (CR) for lifetime exposure to benzene for all the scenarios was evaluated using the Slope Factor and Overall Risk Probability (ORP) methods. The result suggests a potential cancer risk for exposure to benzene in all the scenarios. However, there is a higher cancer risk at 95% (CEXP95) for petroleum refinery workers (2B) with a CR of 48,000 per 106 and exposure to benzene in air inside petroleum refineries (3B) with a CR of 28,000 per 106. PMID:25588154

  19. Supporting More Inclusive Learning with Social Networking: A Case Study of Blended Socialised Design Education

    ERIC Educational Resources Information Center

    Rodrigo, Russell; Nguyen, Tam

    2013-01-01

    This paper presents a qualitative case study of socialised blended learning, using a social network platform to investigate the level of literacies and interactions of students in a blended learning environment of traditional face-to-face design studio and online participatory teaching. Using student and staff feedback, the paper examines the use…

  20. Recent studies in microbial degradation of petroleum hydrocarbons in hypersaline environments

    PubMed Central

    Fathepure, Babu Z.

    2014-01-01

    Many hypersaline environments are often contaminated with petroleum compounds. Among these, oil and natural gas production sites all over the world and hundreds of kilometers of coastlines in the more arid regions of Gulf countries are of major concern due to the extent and magnitude of contamination. Because conventional microbiological processes do not function well at elevated salinities, bioremediation of hypersaline environments can only be accomplished using high salt-tolerant microorganisms capable of degrading petroleum compounds. In the last two decades, there have been many reports on the biodegradation of hydrocarbons in moderate to high salinity environments. Numerous microorganisms belonging to the domain Bacteria and Archaea have been isolated and their phylogeny and metabolic capacity to degrade a variety of aliphatic and aromatic hydrocarbons in varying salinities have been demonstrated. This article focuses on our growing understanding of bacteria and archaea responsible for the degradation of hydrocarbons under aerobic conditions in moderate to high salinity conditions. Even though organisms belonging to various genera have been shown to degrade hydrocarbons, members of the genera Halomonas Alcanivorax, Marinobacter, Haloferax, Haloarcula, and Halobacterium dominate the published literature. Despite rapid advances in understanding microbial taxa that degrade hydrocarbons under aerobic conditions, not much is known about organisms that carry out similar processes in anaerobic conditions. Also, information on molecular mechanisms and pathways of hydrocarbon degradation in high salinity is scarce and only recently there have been a few reports describing genes, enzymes and breakdown steps for some hydrocarbons. These limited studies have clearly revealed that degradation of oxygenated and non-oxygenated hydrocarbons by halophilic and halotolerant microorganisms occur by pathways similar to those found in non-halophiles. PMID:24795705

  1. Evaluation of pulsed corona discharge plasma for the treatment of petroleum-contaminated soil.

    PubMed

    Li, Rui; Liu, Yanan; Mu, Ruiwen; Cheng, Wenyan; Ognier, Stéphanie

    2017-01-01

    Petroleum hydrocarbons released to the environment caused by leakage or illegal dumping pose a threat to human health and the natural environment. In this study, the potential of a pulsed corona discharge plasma system for treating petroleum-polluted soils was evaluated. This system removed 76.93 % of the petroleum from the soil in 60 min with an energy efficiency of 0.20 mg/kJ. Furthermore, the energy and degradation efficiencies for the remediation of soil contaminated by single polyaromatic hydrocarbons, such as phenanthrene and pyrene, were also compared, and the results showed that this technology had potential in organic-polluted soil remediation. In addition, the role of water molecules was investigated for their direct involvement in the formation and transportation of active species. The increase of soil moisture to a certain extent clearly benefitted degradation efficiency. Then, treated soils were analyzed by FTIR and GC-MS for proposing the degradation mechanism of petroleum. During the plasma discharging processes, the change of functional group and the detection of small aromatic hydrocarbons indicated that the plasma active species attached petroleum hydrocarbons and degradation occurred. This technique reported herein demonstrated significant potential for the remediation of heavily petroleum-polluted soil, as well as for the treatment of organic-polluted soils.

  2. A scan statistic for identifying optimal risk windows in vaccine safety studies using self-controlled case series design.

    PubMed

    Xu, Stanley; Hambidge, Simon J; McClure, David L; Daley, Matthew F; Glanz, Jason M

    2013-08-30

    In the examination of the association between vaccines and rare adverse events after vaccination in postlicensure observational studies, it is challenging to define appropriate risk windows because prelicensure RCTs provide little insight on the timing of specific adverse events. Past vaccine safety studies have often used prespecified risk windows based on prior publications, biological understanding of the vaccine, and expert opinion. Recently, a data-driven approach was developed to identify appropriate risk windows for vaccine safety studies that use the self-controlled case series design. This approach employs both the maximum incidence rate ratio and the linear relation between the estimated incidence rate ratio and the inverse of average person time at risk, given a specified risk window. In this paper, we present a scan statistic that can identify appropriate risk windows in vaccine safety studies using the self-controlled case series design while taking into account the dependence of time intervals within an individual and while adjusting for time-varying covariates such as age and seasonality. This approach uses the maximum likelihood ratio test based on fixed-effects models, which has been used for analyzing data from self-controlled case series design in addition to conditional Poisson models. Copyright © 2013 John Wiley & Sons, Ltd.

  3. JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

    NASA Technical Reports Server (NTRS)

    Avila, Arturo

    2011-01-01

    The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

  4. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Petroleum Refining

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sabine Brueske, Caroline Kramer, Aaron Fisher

    2015-06-01

    Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy used in nine individual process areas, representing 68% of sector-wide energy consumption. Energy savings opportunities for individual processes are based on technologies currently in use or under development; these potential savings are then extrapolated to estimate sector-wide energy savings opportunity.

  5. Preliminary petroleum resource estimates for Indonesia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kingston, J.

    1986-05-01

    Of about 44 sedimentary basins along the 2900 mi east-west extent of Indonesia, 13 basins are believed to contain practically all of Indonesia's future petroleum resources. Western Indonesia, underlain by the Asian (Sunda) continental block, comprises the Sumatra-Java archipelago, the island of Kalimantan, and the intervening Sunda Shelf. This area contains almost all of the Indonesian petroleum reserves, and its exploration has reached early maturity. The reserves are concentrated in the five larger inner-arc basins of the archipelago and in the three rifted basins of the Kalimantan-Sunda Shelf area. Eastern Indonesia is essentially Irian Jaya (western New Guinea) and themore » adjoining shelf. The north edge of the Australian-New Guinea continental block has been successively rifted, compressed, and wrenched along its northern boundary with the Pacific plate. Exploration of the three major basins in this tectonic zone is still in an early stage. Preliminary most-likely estimates of the undiscovered recoverable petroleum resources of Indonesia are approximately 7 billion bbl of oil and 70 tcf of gas (in addition to an estimated 70 tcf of discovered gas not yet assigned to reserves). More than 90% of the undiscovered petroleum resources are in western Indonesia, but the best chances for unknown giant discoveries may be in the frontier Irian Jaya of eastern Indonesia.« less

  6. 75 FR 63200 - Petroleum Wax Candles From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-14

    ... From China AGENCY: United States International Trade Commission. ACTION: Scheduling of an expedited five-year review concerning the antidumping duty order on petroleum wax candles from China. SUMMARY... antidumping duty order on petroleum wax candles from China would be likely to lead to continuation or...

  7. Case Study of Online Banking in India: User Behaviors and Design Guidelines

    NASA Astrophysics Data System (ADS)

    Iyengar, Jhumkee; Belvalkar, Manisha

    This paper documents online banking trends, behaviors and expectations of Indian consumers and banks. It is based on excerpts of a large industry case study of users from 4 leading banks. While banks view online banking essentially as a technology solution, it is a relatively new area for Indian consumers and not yet self-supporting. Being a savings based culture still, Indian consumers are cautious about their financial assets. They are also relatively recent entrants to internet based services. Design of these systems must therefore be based on an understanding of these users' outlook and priorities through task centric, security assured and service oriented solutions minus the technological challenges. Design lessons suggest viewing online banking not just as a convenience alone anymore but beyond it, to provide service, simplicity and security. This will create satisfied online banking customers and therefore profitability for the bank.

  8. An unusual etiology in cold injury: Liquefied petroleum gas.

    PubMed

    Kapı, Emin; Bozkurt, Mehmet; Taylan Filinte, Gaye; Kuvat, Samet Vasfi; Alioğlu, Celal

    2017-05-01

    Cold injury is a condition that causes reversible and irreversible damage when tissues are exposed to cold. This injury occurs due to various etiologies, and the most commonly observed ones include contact with liquefied petroleum gas (LPG) used in households, vehicles, and industry. LPG is a type of gas stored in liquid state under high pressure within cylinders. LPG contains a mixture of propane and butane gases. Direct contact of these gases with the tissues has the potential to cause metabolic, toxic, and respiratory damage. In this study, we present the cases of four patients with cold injury in the face and upper extremity caused by a pressurized jet stream of liquid gas that escaped out of the valves of the LPG cylinders. The patients had bullous lesions in the upper extremities and the face and second- and third-degree cold injuries with fibrotic and necrotic areas. The superficial defects secondarily healed with minimal scarring, while the necrotic finger had to be amputated. Cold injury on the skin caused by high-pressure jet streams of liquid gas as in our study is a rare occurrence. Our patients are important cases due to the rare etiology of cold injury.

  9. Assessment of undiscovered petroleum resources of the Arctic Alaska Petroleum Province

    USGS Publications Warehouse

    Houseknecht, David W.; Bird, Kenneth J.; Garrity, Christopher P.

    2012-01-01

    The Arctic Alaska Petroleum Province encompasses all lands and adjacent continental shelf areas north of the Brooks Range-Herald arch tectonic belts and south of the northern (outboard) margin of the Alaska rift shoulder. Even though only a small part is thoroughly explored, it is one of the most prolific petroleum provinces in North America, with total known resources (cumulative production plus proved reserves) of about 28 billion barrels of oil equivalent. For assessment purposes, the province is divided into a platform assessment unit, comprising the Alaska rift shoulder and its relatively undeformed flanks, and a fold-and-thrust belt assessment unit, comprising the deformed area north of the Brooks Range and Herald arch tectonic belts. Mean estimates of undiscovered, technically recoverable resources include nearly 28 billion barrels of oil and 122 trillion cubic feet of nonassociated gas in the platform assessment unit and 2 billion barrels of oil and 59 trillion cubic feet of nonassociated gas in the fold-and-thrust belt assessment unit.

  10. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-09-01

    A Powder River Basin subbituminous coal from the North Antelope mine and a petroleum shot coke were received from Northern States Power Company (NSP) for testing the effects of parent fuel properties on coal-coke blend grindability and evaluating the utility of petroleum coke blending as a strategy for improving electrostatic precipitator (ESP) particulate collection efficiency. Petroleum cokes are generally harder than coals, as indicated by Hardgrove grindability tests. Therefore, the weaker coal component may concentrate in the finer size fractions during the pulverizing of coal-coke blends. The possibility of a coal-coke size fractionation effect is being investigated because it maymore » adversely affect combustion performance. Although the blending of petroleum coke with coal may adversely affect combustion performance, it may enhance ESP particulate collection efficiency. Petroleum cokes contain much higher concentrations of V relative to coals. Consequently, coke blending can significantly increase the V content of fly ash resulting from coal-coke combustion. Pentavalent vanadium oxide (V{sub 2}O{sub 5}) is a known catalyst for transforming gaseous sulfur dioxide (SO{sub 2}[g]) to gaseous sulfur trioxide (SO{sub 3}[g]). The presence of SO{sub 3}(g) strongly affects fly ash resistivity and, thus, ESP performance.« less

  11. Carbon taxes and the petroleum wealth

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosendahl, K.E.

    1995-12-31

    A global carbon tax may have considerable impact on the petroleum wealth of fossil fuel producers. However, it is not clear to what extent such a tax eventually will decrease the producer prices, rather than increase the consumer prices. Thus, an interesting question is: How will the tax burden be shared between producers and consumers? This question is of course of major importance for countries with relatively large petroleum reserves, like for instance the OPEC-countries as well as Norway. In this study we are addressing this question, trying to reveal how different carbon taxes may change the petroleum wealth, bothmore » for the average producer and for Norway in particular. Even if a global climate treaty at present seems a bit distant, several OECD-countries are or have been discussing a carbon tax to restrict their emissions of CO{sub 2}. Hence, there is a fair possibility that such a tax, or eventually some quota restrictions, will be imposed in at least the main countries of the OECD-area, which stands for almost 60 percent of the worlds oil consumption. The size of this tax is difficult to foresee, and in addition, the tax may not be constant over time. However, some concrete proposals of a carbon tax have been put forward in e.g. the EU and the US, and several research projects have come up with appropriate suggestions (see e.g. Manne and Richels and Oliveira Martins et al.).« less

  12. Large public display boards: a case study of an OR board and design implications.

    PubMed

    Lasome, C E; Xiao, Y

    2001-01-01

    A compelling reason for studying artifacts in collaborative work is to inform design. We present a case study of a public display board (12 ft by 4 ft) in a Level-I trauma center operating room (OR) unit. The board has evolved into a sophisticated coordination tool for clinicians and supporting personnel. This paper draws on study findings about how the OR board is used and organizes the findings into three areas: (1) visual and physical properties of the board that are exploited for collaboration, (2) purposes the board was configured to serve, and (3) types of physical and perceptual interaction with the board. Findings and implications related to layout, size, flexibility, task management, problem-solving, resourcing, shared awareness, and communication are discussed in an effort to propose guidelines to facilitate the design of electronic, computer driven display boards in the OR environment.

  13. Technological Prospection on Nanotechnologies Applied to the Petroleum Industry.

    PubMed

    Parreiras, Viviane M A; de S Antunes, Adelaide M

    2015-01-01

    This paper presents a technological prospection on nanotechnologies applied to the petroleum industry through the creation of a worldwide overview regarding scientific paper publications and patents concerning that business, with the purpose of identifying the main trends on research and development (R&D), the annual evolution, as well as the key agents and countries involved. In this research, it was possible to verify the presence of services oil companies, like Baker, Schlumberger and Halliburton. In scientific paper publications, it was possible to observe university departments, related to petroleum studies, from different countries, as Thailand, China, USA, Iran.

  14. The petroleum exponential (again)

    NASA Astrophysics Data System (ADS)

    Bell, Peter M.

    The U.S. production and reserves of liquid and gaseous petroleum have declined since 1960, at least in the lower 48 states. This decline stems from decreased discovery rates, as predicted by M. King Hubbert in the mid-1950's. Hubbert's once unpopular views were based on statistical analysis of the production history of the petroleum industry, and now, even with inclusion of the statistical perturbation caused by the Prudhoe Bay-North Alaskan Slope discovery (the largest oil field ever found in the United States), it seems clear again that production is following the exponential curve to depletion of the resource—to the end of the ultimate yield of petroleum from wells in the United States.In a recent report, C. Hall and C. Cleveland of Cornell University show that large atypical discoveries, such as the Prudhoe Bay find, are but minor influences on what now appears to be the crucial intersection of two exponentials [Science, 211, 576-579, 1981]: the production-per-drilled-foot curve of Hubbert, which crosses zero production no later than the year 2005; the other, a curve that plots the energy cost of drilling and extraction with time; that is, the cost-time rate of how much oil is used to drill and extract oil from the ground. The intersection, if no other discoveries the size of the Prudhoe Bay field are made, could be as early as 1990, the end of the present decade. The inclusion of each Prudhoe-Bay-size find extends the year of intersection by only about 6 years. Beyond that point, more than one barrel of petroleum would be expended for each barrel extracted from the ground. The oil exploration-extraction and refining industry is currently the second most energy-intensive industry in the U.S., and the message seems clear. Either more efficient drilling and production techniques are discovered, or domestic production will cease well before the end of this century if the Hubbert analysis modified by Hall and Cleveland is correct.

  15. Arbitrage model for optimal capital transactions in petroleum reserves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ten Eyck, D.K.

    1986-01-01

    This dissertation provides a methodology for identifying price differentials in the market for petroleum reserves, enabling petroleum-producing firms to engage in a variation of classical arbitrage. This approach enables the petroleum-producing firm to evaluate and rank reserve-replacement projects from the three principal sources listed below in order to maximize the return on invested capital. The methodology is based on the discounted cash flow approach to valuation of the oil and gas reserves obtained (1) by exploration, (2) by direct purchase of reserves, and (3) by acquisition of an entire petroleum firm. The reserve-replacement projects are evaluated and ranked to determinemore » an optimal portfolio of reserve-replacement projects. Cost per barrel alone is shown to be ineffective as an evaluation tool because it may lead to economic decisions that do not maximize the value of the firm. When used with other economic decision criteria, cost per barrel is useful as a downside economic indicator by showing which projects will fare better under unfavorable price scenarios. Important factors affecting the valuation of an acquisition (in addition to the oil and gas reserves) are shown by this study to be purchase price, other assets including cash, future tax savings from operating losses carried forward, and liabilities, primarily long-term debt.« less

  16. A comparison of major petroleum life cycle models | Science ...

    EPA Pesticide Factsheets

    Many organizations have attempted to develop an accurate well-to-pump life cycle model of petroleum products in order to inform decision makers of the consequences of its use. Our paper studies five of these models, demonstrating the differences in their predictions and attempting to evaluate their data quality. Carbon dioxide well-to-pump emissions for gasoline showed a variation of 35 %, and other pollutants such as ammonia and particulate matter varied up to 100 %. Differences in allocation do not appear to explain differences in predictions. Effects of these deviations on well-to-wheels passenger vehicle and truck transportation life cycle models may be minimal for effects such as global warming potential (6 % spread), but for respiratory effects of criteria pollutants (41 % spread) and other impact categories, they can be significant. A data quality assessment of the models’ documentation revealed real differences between models in temporal and geographic representativeness, completeness, as well as transparency. Stakeholders may need to consider carefully the tradeoffs inherent when selecting a model to conduct life cycle assessments for systems that make heavy use of petroleum products. This is a qualitative and quantitative comparison of petroleum LCA models intended for an expert audience interested in better understanding the data quality of existing petroleum life cycle models and the quantitative differences between these models.

  17. Material-balance assessment of the New Albany-Chesterian petroleum system of the Illinois basin

    USGS Publications Warehouse

    Lewan, M.D.; Henry, M.E.; Higley, D.K.; Pitman, Janet K.

    2002-01-01

    The New Albany-Chesterian petroleum system of the Illinois basin is a well-constrained system from which petroleum charges and losses were quantified through a material-balance assessment. This petroleum system has nearly 90,000 wells penetrating the Chesterian section, a single New Albany Shale source rock accounting for more than 99% of the produced oil, well-established stratigraphic and structural frameworks, and accessible source rock samples at various maturity levels. A hydrogen index (HI) map based on Rock-Eval analyses of source rock samples of New Albany Shale defines the pod of active source rock and extent of oil generation. Based on a buoyancy-drive model, the system was divided into seven secondary-migration catchments. Each catchment contains a part of the active pod of source rock from which it derives a petroleum charge, and this charge is confined to carrier beds and reservoirs within these catchments as accountable petroleum, petroleum losses, or undiscovered petroleum. A well-constrained catchment with no apparent erosional or leakage losses is used to determine an actual petroleum charge from accountable petroleum and residual migration losses. This actual petroleum charge is used to calibrate the other catchments in which erosional petroleum losses have occurred. Petroleum charges determined by laboratory pyrolysis are exaggerated relative to the actual petroleum charge. Rock-Eval charges are exaggerated by a factor of 4-14, and hydrouspyrolysis charges are exaggerated by a factor of 1.7. The actual petroleum charge provides a more meaningful material balance and more realistic estimates of petroleum losses and remaining undiscovered petroleum. The total petroleum charge determined for the New Albany-Chesterian system is 78 billion bbl, of which 11.4 billion bbl occur as a accountable in place petroleum, 9 billion bbl occur as residual migration losses, and 57.6 billion bbl occur as erosional losses. Of the erosional losses, 40 billion bbl

  18. The Implementation and Maintenance of a Behavioral Safety Process in a Petroleum Refinery

    ERIC Educational Resources Information Center

    Myers, Wanda V.; McSween, Terry E.; Medina, Rixio E.; Rost, Kristen; Alvero, Alicia M.

    2010-01-01

    A values-centered and team-based behavioral safety process was implemented in a petroleum oil refinery. Employee teams defined the refinery's safety values and related practices, which were used to guide the process design and implementation. The process included (a) a safety assessment; (b) the clarification of safety-related values and related…

  19. The effect of a loss of model structural detail due to network skeletonization on contamination warning system design: case studies.

    PubMed

    Davis, Michael J; Janke, Robert

    2018-01-04

    The effect of limitations in the structural detail available in a network model on contamination warning system (CWS) design was examined in case studies using the original and skeletonized network models for two water distribution systems (WDSs). The skeletonized models were used as proxies for incomplete network models. CWS designs were developed by optimizing sensor placements for worst-case and mean-case contamination events. Designs developed using the skeletonized network models were transplanted into the original network model for evaluation. CWS performance was defined as the number of people who ingest more than some quantity of a contaminant in tap water before the CWS detects the presence of contamination. Lack of structural detail in a network model can result in CWS designs that (1) provide considerably less protection against worst-case contamination events than that obtained when a more complete network model is available and (2) yield substantial underestimates of the consequences associated with a contamination event. Nevertheless, CWSs developed using skeletonized network models can provide useful reductions in consequences for contaminants whose effects are not localized near the injection location. Mean-case designs can yield worst-case performances similar to those for worst-case designs when there is uncertainty in the network model. Improvements in network models for WDSs have the potential to yield significant improvements in CWS designs as well as more realistic evaluations of those designs. Although such improvements would be expected to yield improved CWS performance, the expected improvements in CWS performance have not been quantified previously. The results presented here should be useful to those responsible for the design or implementation of CWSs, particularly managers and engineers in water utilities, and encourage the development of improved network models.

  20. The effect of a loss of model structural detail due to network skeletonization on contamination warning system design: case studies

    NASA Astrophysics Data System (ADS)

    Davis, Michael J.; Janke, Robert

    2018-05-01

    The effect of limitations in the structural detail available in a network model on contamination warning system (CWS) design was examined in case studies using the original and skeletonized network models for two water distribution systems (WDSs). The skeletonized models were used as proxies for incomplete network models. CWS designs were developed by optimizing sensor placements for worst-case and mean-case contamination events. Designs developed using the skeletonized network models were transplanted into the original network model for evaluation. CWS performance was defined as the number of people who ingest more than some quantity of a contaminant in tap water before the CWS detects the presence of contamination. Lack of structural detail in a network model can result in CWS designs that (1) provide considerably less protection against worst-case contamination events than that obtained when a more complete network model is available and (2) yield substantial underestimates of the consequences associated with a contamination event. Nevertheless, CWSs developed using skeletonized network models can provide useful reductions in consequences for contaminants whose effects are not localized near the injection location. Mean-case designs can yield worst-case performances similar to those for worst-case designs when there is uncertainty in the network model. Improvements in network models for WDSs have the potential to yield significant improvements in CWS designs as well as more realistic evaluations of those designs. Although such improvements would be expected to yield improved CWS performance, the expected improvements in CWS performance have not been quantified previously. The results presented here should be useful to those responsible for the design or implementation of CWSs, particularly managers and engineers in water utilities, and encourage the development of improved network models.

  1. 75 FR 38121 - Petroleum Wax Candles From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-01

    ... From China AGENCY: United States International Trade Commission. ACTION: Institution of a five-year review concerning the antidumping duty order on petroleum wax candles from China. SUMMARY: The Commission... petroleum wax candles from China would be likely to lead to continuation or recurrence of material injury...

  2. 21 CFR 172.882 - Synthetic isoparaffinic petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Synthetic isoparaffinic petroleum hydrocarbons... hydrocarbons. Synthetic isoparaffinic petroleum hydrocarbons may be safely used in food, in accordance with the... liquid hydrocarbons meeting the following specifications: Boiling point 93-260 °C as determined by ASTM...

  3. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Odorless light petroleum hydrocarbons. 172.884 Section 172.884 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light...

  4. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Odorless light petroleum hydrocarbons. 172.884 Section 172.884 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light...

  5. 21 CFR 172.884 - Odorless light petroleum hydrocarbons.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Odorless light petroleum hydrocarbons. 172.884 Section 172.884 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... HUMAN CONSUMPTION Multipurpose Additives § 172.884 Odorless light petroleum hydrocarbons. Odorless light...

  6. Biosurfactants: Promising Molecules for Petroleum Biotechnology Advances.

    PubMed

    De Almeida, Darne G; Soares Da Silva, Rita de Cássia F; Luna, Juliana M; Rufino, Raquel D; Santos, Valdemir A; Banat, Ibrahim M; Sarubbo, Leonie A

    2016-01-01

    The growing global demand for sustainable technologies that improves the efficiency of petrochemical processes in the oil industry has driven advances in petroleum biotechnology in recent years. Petroleum industry uses substantial amounts of petrochemical-based synthetic surfactants in its activities as mobilizing agents to increase the availability or recovery of hydrocarbons as well as many other applications related to extraction, treatment, cleaning, and transportation. However, biosurfactants have several potential applications for use across the oil processing chain and in the formulations of petrochemical products such as emulsifying/demulsifying agents, anticorrosive, biocides for sulfate-reducing bacteria, fuel formulation, extraction of bitumen from tar sands, and many other innovative applications. Due to their versatility and proven efficiency, biosurfactants are often presented as valuable versatile tools that can transform and modernize petroleum biotechnology in an attempt to provide a true picture of state of the art and directions or use in the oil industry. We believe that biosurfactants are going to have a significant role in many future applications in the oil industries and in this review therefore, we highlight recent important relevant applications, patents disclosures and potential future applications for biosurfactants in petroleum and related industries.

  7. Biosurfactants: Promising Molecules for Petroleum Biotechnology Advances

    PubMed Central

    De Almeida, Darne G.; Soares Da Silva, Rita de Cássia F.; Luna, Juliana M.; Rufino, Raquel D.; Santos, Valdemir A.; Banat, Ibrahim M.; Sarubbo, Leonie A.

    2016-01-01

    The growing global demand for sustainable technologies that improves the efficiency of petrochemical processes in the oil industry has driven advances in petroleum biotechnology in recent years. Petroleum industry uses substantial amounts of petrochemical-based synthetic surfactants in its activities as mobilizing agents to increase the availability or recovery of hydrocarbons as well as many other applications related to extraction, treatment, cleaning, and transportation. However, biosurfactants have several potential applications for use across the oil processing chain and in the formulations of petrochemical products such as emulsifying/demulsifying agents, anticorrosive, biocides for sulfate-reducing bacteria, fuel formulation, extraction of bitumen from tar sands, and many other innovative applications. Due to their versatility and proven efficiency, biosurfactants are often presented as valuable versatile tools that can transform and modernize petroleum biotechnology in an attempt to provide a true picture of state of the art and directions or use in the oil industry. We believe that biosurfactants are going to have a significant role in many future applications in the oil industries and in this review therefore, we highlight recent important relevant applications, patents disclosures and potential future applications for biosurfactants in petroleum and related industries. PMID:27843439

  8. Dermal uptake of petroleum substances.

    PubMed

    Jakasa, Ivone; Kezic, Sanja; Boogaard, Peter J

    2015-06-01

    Petroleum products are complex substances comprising varying amounts of linear and branched alkanes, alkenes, cycloalkanes, and aromatics which may penetrate the skin at different rates. For proper interpretation of toxic hazard data, understanding their percutaneous absorption is of paramount importance. The extent and significance of dermal absorption of eight petroleum substances, representing different classes of hydrocarbons, was evaluated. Literature data on the steady-state flux and permeability coefficient of these substances were evaluated and compared to those predicted by mathematical models. Reported results spanned over 5-6 orders of magnitude and were largely dependent on experimental conditions in particular on the type of the vehicle used. In general, aromatic hydrocarbons showed higher dermal absorption than more lipophilic aliphatics with similar molecular weight. The results showed high variation and were largely influenced by experimental conditions emphasizing the need of performing the experiments under "in use" scenario. The predictive models overestimated experimental absorption. The overall conclusion is that, based on the observed percutaneous penetration data, dermal exposure to petroleum hydrocarbons, even of aromatics with highest dermal absorption is limited and highly unlikely to be associated with health risks under real use scenarios. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  9. Burn injuries related to liquefied petroleum gas-powered cars.

    PubMed

    Bozkurt, Mehmet; Kulahci, Yalcin; Zor, Fatih; Kapi, Emin

    2008-01-01

    Liquefied petroleum gas (LPG), which is used as a type of fuel, is stored as a liquid under high pressure in tanks. Immediate and sudden explosion of these tanks can release a large amount of gas and energy into the environment and can result in serious burns. In this study, the cases of 18 patients injured due to LPG burns in five incidents were examined, along with their epidemiologic features. The authors also investigated the causes of the LPG tank explosions. Inhalation injury was present in 11 cases with varying degrees of severity, and 7 patients subsequently required mechanical ventilation. The explosions resulted from weakening of the tank wall (n = 2), crash impact (n = 2), and gas leakage from the tank (n = 1). LPG-powered cars are becoming more popular because of their lower operational costs. However, LPG tanks can be hazardous in the event of a tank explosion. Burns caused by explosions of the LPG tanks in cars have significant mortality and morbidity. This danger must be taken into account and public awareness must be increased.

  10. Making the case for evidence-based design in healthcare: a descriptive case study of organizational decision making.

    PubMed

    Shoemaker, Lorie K; Kazley, Abby Swanson; White, Andrea

    2010-01-01

    The aim of this study was to describe the organizational decision-making process used in the selection of evidence-based design (EBD) concepts, the criteria used to make these decisions, and the extent to which leadership style may have influenced the decision-making process. Five research questions were formulated to frame the direction of this study, including: (1) How did healthcare leaders learn of innovations in design? (2) How did healthcare leaders make decisions in the selection of healthcare design concepts? (3) What criteria did healthcare leaders use in the decision-making process? (4) How did healthcare leaders consider input from the staff in design decisions? and (5) To what extent did the leadership style of administrators affect the outcomes of the decision-making process? Current issues affecting healthcare in the community led the principal investigator's organization to undertake an ambitious facilities expansion project. As part of its planning process, the organization learned of EBD principles that seemingly had a positive impact on patient care and safety and staff working conditions. Although promising, a paucity of empirical research addressed the cost/benefit of incorporating many EBD concepts into one hospital setting, and there was no research that articulated the organizational decision-making process used by healthcare administrators when considering the use of EBD in expansion projects. A mixed-method, descriptive, qualitative, single-case study and quantitative design were used to address the five research questions. The Systems Research Organizing Model provided the theoretical framework. A variety of data collection methods was used, including interviews of key respondents, the review of documentary evidence, and the Multifactor Leadership Questionnaire. A participatory process was used throughout the design decision phases, involving staff at all levels of the organization. The Internet and architects facilitated learning about

  11. Petroleum reserves and undiscovered resources in the total petroleum systems of Iraq: Reserve growth and production implications

    USGS Publications Warehouse

    Verma, M.K.; Ahlbrandt, T.S.; Al-Gailani, M.

    2004-01-01

    Iraq is one of the world's most petroleum-rich countries and, in the future, it could become one of the main producers. Iraq's petroleum resources are estimated to be 184 billion barrels, which include oil and natural gas reserves, and undiscovered resources. With its proved (or remaining) reserves of 113 billion barrels of oil (BBO) as of January 2003, Iraq ranks second to Saudi Arabia with 259 BBO in the Middle East. Iraq's proved reserves of 110 trillion cubic feet of gas (TCFG) rank tenth in the world. In addition to known reserves, the combined undiscovered hydrocarbon potential for the three Total Petroleum Systems (Paleozoic, Jurassic, and Cretaceous/Tertiary) in Iraq is estimated to range from 14 to 84 BBO (45 BBO at the mean), and 37 to 227 TCFG (120 TCFG at the mean). Additionally, of the 526 known prospective structures, some 370 remain undrilled. Petroleum migration models and associated geological and geochemical studies were used to constrain the undiscovered resource estimates of Iraq. Based on a criterion of recoverable reserves of between 1 and 5 BBO for a giant field, and more than 5 BBO for a super-giant, Iraq has 6 super-giant and 11 giant fields, accounting for 88% of its recoverable reserves, which include proved reserves and cumulative production. Of the 28 producing fields, 22 have recovery factors that range from 15 to 42% with an overall average of less than 30%. The recovery factor can be increased with water injection, improved and enhanced oil recovery methods (IOR and EOR) in various reservoirs, thus potentially increasing Iraq's reserves by an additional 50 to 70 BBO. Reserve growth is a significant factor that has been observed, to some extent, in nearly all Iraqi oil fields. Historically, producing fields have shown an average growth of 1.6 fold (or 60%) in their recoverable reserves over a 20-year period (1981-2001). With periodic assessments of reservoirs, application of available technology, and an upgrading of facilities

  12. Tectonics of East Siberian Sea Basin and its influence on petroleum systems

    NASA Astrophysics Data System (ADS)

    Karpov, Yury; Antonina, Stoupakova; Anna, Suslova; Mariia, Agasheva

    2016-04-01

    The East Siberian Sea basin (ESSB) is the largest part of the Siberian Arctic shelf, extending for over 1000 km from New Siberian Islands archipelago to Wrangel Island. Nowadays East Siberian Sea margin is considered as a region with probable high petroleum potential. This part of Russian Arctic shelf is the least studied. The major problems in geological investigation of East Siberian Sea shelf are absence of deep wells in area and low seismic exploration maturity. Only general conclusions on its geology and hydrocarbon systems can be drawn based on limited seismic, gravity and magnetic data, supported by projection of onshore geological data to offshore. So, that's why now only complex geological and seismic stratigraphy interpretations are provided. Today we have several concepts and can summarize the tectonic history of the basin. The basin is filled with siliclastic sediments. In the deepest depocentres sediments thickness exceed 8 km in average. Seismic data was interpreted using methods of seismic stratigraphy. Stratigraphic interpretation was possible to achieve because seismic reflections follow chronostratigraphic correlations. Finally, main seismic horizons were indicated. Each indicated horizon follows regional stratigraphic unconformity. In case of absence of deep wells in ESSB, we can only prove possible source rocks by projection of data about New Siberian Islands archipelago source rocks on offshore. The petroleum potential of these rocks was investigated by several authors [1, 2, 3]. Perspective structures, investigated in ESSB were founded out by comparing seismogeological cross-sections with explored analogs in other Russian and foreign onshore and offshore basins. The majority of structures could be connected with stratigraphic and fault traps. New data on possible petroleum plays was analyzed, large massif of data on geology and tectonic history of the region was collected, so now we can use method of basin modelling to evaluate hydrocarbon

  13. [Comparing case management care models for people with dementia and their caregivers: the design of the COMPAS study].

    PubMed

    van Hout, H P J; Macneil Vroomen, J L; Van Mierlo, L D; Meiland, F J M; Moll van Charante, E P; Joling, K J; van den Dungen, P; Dröes, R M; van der Horst, H E; de Rooij, S E J A

    2014-04-01

    Dementia care in The Netherlands is shifting from fragmented, ad hoc care to more coordinated and personalized care. Case management contributes to this shift. The linkage model and a combination of intensive case management and joint agency care models were selected based on their emerging prominence in The Netherlands. It is unclear if these different forms of case management are more effective than usual care in improving or preserving the functioning and well-being at the patient and caregiver level and at the societal cost. The objective of this article is to describe the design of a study comparing these two case management care models against usual care. Clinical and cost outcomes are investigated while care processes and the facilitators and barriers for implementation of these models are considered. Mixed methods include a prospective, observational, controlled, cohort study among persons with dementia and their primary informal caregiver in regions of The Netherlands with and without case management including a qualitative process evaluation. Community-dwelling individuals with a dementia diagnosis with an informal caregiver are included. The primary outcome measure is the Neuropsychiatric Inventory for the people with dementia and the General Health Questionnaire for their caregivers. Costs are measured from a societal perspective. Semi-structured interviews with stakeholders based on the theoretical model of adaptive implementation are planned. 521 pairs of persons with dementia and their primary informal caregiver were included and are followed over two years. In the linked model substantially more impeding factors for implementation were identified compared with the model. This article describes the design of an evaluation study of two case management models along with clinical and economic data from persons with dementia and caregivers. The impeding and facilitating factors differed substantially between the two models. Further results on cost

  14. 46 CFR 105.05-1 - Commercial fishing vessels dispensing petroleum products.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Commercial fishing vessels dispensing petroleum products... MISCELLANEOUS VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-1 Commercial fishing vessels dispensing petroleum products. (a) The provisions of this part, with the exception of...

  15. 46 CFR 105.05-1 - Commercial fishing vessels dispensing petroleum products.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Commercial fishing vessels dispensing petroleum products... MISCELLANEOUS VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-1 Commercial fishing vessels dispensing petroleum products. (a) The provisions of this part, with the exception of...

  16. 46 CFR 105.05-1 - Commercial fishing vessels dispensing petroleum products.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Commercial fishing vessels dispensing petroleum products... MISCELLANEOUS VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Application § 105.05-1 Commercial fishing vessels dispensing petroleum products. (a) The provisions of this part, with the exception of...

  17. Applications of T-ray spectroscopy in the petroleum field

    NASA Astrophysics Data System (ADS)

    Al-Douseri, Fatemah M.

    2005-11-01

    Because of heavy usage of petroleum products, which are the main source of energy in daily life and industry, a fast, reliable, and portable analysis system is needed to complement traditional techniques. Terahertz (THz) radiation, or T-rays, is electromagnetic radiation in the 0.1 to 10 THz frequency range. One unique attribute of T-rays is their ability to sensitively measure the induced molecular dipole moments in non-polar liquids such as aromatics, which make up the majority of the contents of many petroleum products. This information can lead to several applications in petroleum analysis. The application of T-rays to petroleum product analysis has the potential to make a significant impact in the petroleum field. In this dissertation, I show the first use of T-ray time-domain spectroscopy and Fourier transform infrared (FTIR) spectroscopy techniques for petroleum product analysis. I report on the feasibility of analyzing selected petroleum products, including gasoline, diesel, lubricating oil, and selected compounds of toluene, ethylbenzene, and xylene (BTEX). With the use of a T-ray time-domain spectrometer. I demonstrate that gasolines with different octane numbers and diesel all show specific absorption coefficients and refractive indexes in the spectral range from 0.5 to 2.0 THz. Furthermore, I report the qualitative and quantitative analysis of selected BTEX components in gasoline and diesel using FTIR spectroscopy in the 50 to 650 cm-1 region. I distinguish gasolines with different octane numbers from diesel and lubricating oil according to their different spectral features. I also determine the concentration of (o, m, p) xylene isomers in gasoline according to their specific absorption bands. The experimental results in this thesis, imply that linking between the knowledge of petroleum products and the development of T-ray spectrometer with the cooperation of industry might translate the T-ray spectroscopic system into a real world application in

  18. In situ bioremediation of petroleum hydrocarbons and chlorinated hydrocarbons: Three case studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bost, R.C.; Perry, R.G.; Barber, T.

    1997-06-01

    In situ biodegradation of organic contaminants is one of the most cost-effective means of site remediation. This method has proven successful in soils, ground water, and slurries. Bacteria capable of degrading organic contaminants within an aquifer include many species from a wide spectrum of genera, e.g. Pseudomonas, Corynebacterium, Bacillus, etc. In most cases, a mixture of bacterial strains is required to completely oxidize a complex organic contaminant. Each strain of an organism may target a specific compound, working together with other organisms to ultimately degrade each intermediate until complete degradation, also known as mineralization, occurs. One or more of themore » following mechanisms are utilized by bacteria for organic chemical degradation: (1) aerobic, (2) anaerobic, and (3) co-metabolic. During aerobic oxidation of organic chemicals, bacteria utilize the pollutant as an electron and hydrogen source and oxygen acts as the electron and hydrogen acceptor, resulting in water. As the bacterial enzymes cleave the compound, oxidized products are produced along with energy for the reaction to proceed. This is the most rapid and widely utilized mechanism. Dehalogenation occurs under aerobic, or perhaps more often, under anoxic conditions. This process occurs in the presence of alternate electron acceptors and replaces chlorine with hydrogen. The mechanism of co-metabolism can be aerobic or anaerobic, but is more often aerobic. This process requires a separate energy source for the bacterial cell because the pollutant is not utilized as an energy source. The role of bioremediation in site remediation is demonstrated below by three case studies: (1) a refinery, (2) a municipal landfill and (3) a pesticide formulation plant.« less

  19. 40 CFR 52.1931 - Petroleum storage tank controls.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 4 2014-07-01 2014-07-01 false Petroleum storage tank controls. 52... storage tank controls. (a) Notwithstanding any provisions to the contrary in the Oklahoma implementation plan, the petroleum storage tanks listed in paragraphs (b) through (e) of this section shall be subject...

  20. 40 CFR 52.1931 - Petroleum storage tank controls.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 4 2013-07-01 2013-07-01 false Petroleum storage tank controls. 52... storage tank controls. (a) Notwithstanding any provisions to the contrary in the Oklahoma implementation plan, the petroleum storage tanks listed in paragraphs (b) through (e) of this section shall be subject...

  1. Impacts of soil petroleum contamination on nutrient release during litter decomposition of Hippophae rhamnoides.

    PubMed

    Zhang, Xiaoxi; Liu, Zengwen; Luc, Nhu Trung; Yu, Qi; Liu, Xiaobo; Liang, Xiao

    2016-03-01

    Petroleum exploitation causes contamination of shrub lands close to oil wells. Soil petroleum contamination affects nutrient release during the litter decomposition of shrubs, which influences nutrient recycling and the maintenance of soil fertility. Hence, this contamination may reduce the long-term growth and stability of shrub communities and consequently, the effects of phytoremediation. Fresh foliar litter of Hippophae rhamnoides, a potential phytoremediating species, was collected for this study. The litter was placed in litterbags and then buried in different petroleum-polluted soil media (the petroleum concentrations were 15, 30, and 45 g kg(-1) dry soil, which were considered as slightly, moderately and seriously polluted soil, respectively) for a decomposition test. The impacts of petroleum contamination on the release of nutrients (including N, P, K, Cu, Zn, Fe, Mn, Ca and Mg) were assessed. The results showed that (1) after one year of decomposition, the release of all nutrients was accelerated in the slightly polluted soil. In the moderately polluted soil, P release was accelerated, while Cu, Zn and Mn release was inhibited. In the seriously polluted soil, Cu and Zn release was accelerated, while the release of the other nutrients was inhibited. (2) The effect of petroleum on nutrient release from litter differed in different periods during decomposition; this was mainly due to changes in soil microorganisms and enzymes under the stress of petroleum contamination. (3) To maintain the nutrient cycling and the soil fertility of shrub lands, H. rhamnoides is only suitable for phytoremediation of soils containing less than 30 g kg(-1) of petroleum.

  2. North Slope, Alaska: Source rock distribution, richness, thermal maturity, and petroleum charge

    USGS Publications Warehouse

    Peters, K.E.; Magoon, L.B.; Bird, K.J.; Valin, Z.C.; Keller, M.A.

    2006-01-01

    Four key marine petroleum source rock units were identified, characterized, and mapped in the subsurface to better understand the origin and distribution of petroleum on the North Slope of Alaska. These marine source rocks, from oldest to youngest, include four intervals: (1) Middle-Upper Triassic Shublik Formation, (2) basal condensed section in the Jurassic-Lower Cretaceous Kingak Shale, (3) Cretaceous pebble shale unit, and (4) Cretaceous Hue Shale. Well logs for more than 60 wells and total organic carbon (TOC) and Rock-Eval pyrolysis analyses for 1183 samples in 125 well penetrations of the source rocks were used to map the present-day thickness of each source rock and the quantity (TOC), quality (hydrogen index), and thermal maturity (Tmax) of the organic matter. Based on assumptions related to carbon mass balance and regional distributions of TOC, the present-day source rock quantity and quality maps were used to determine the extent of fractional conversion of the kerogen to petroleum and to map the original TOC (TOCo) and the original hydrogen index (HIo) prior to thermal maturation. The quantity and quality of oil-prone organic matter in Shublik Formation source rock generally exceeded that of the other units prior to thermal maturation (commonly TOCo > 4 wt.% and HIo > 600 mg hydrocarbon/g TOC), although all are likely sources for at least some petroleum on the North Slope. We used Rock-Eval and hydrous pyrolysis methods to calculate expulsion factors and petroleum charge for each of the four source rocks in the study area. Without attempting to identify the correct methods, we conclude that calculations based on Rock-Eval pyrolysis overestimate expulsion factors and petroleum charge because low pressure and rapid removal of thermally cracked products by the carrier gas retards cross-linking and pyrobitumen formation that is otherwise favored by natural burial maturation. Expulsion factors and petroleum charge based on hydrous pyrolysis may also be high

  3. Petroleum geochemistry of oil and gas from Barbados: Implications for distribution of Cretaceous source rocks and regional petroleum prospectivity

    USGS Publications Warehouse

    Hill, R.J.; Schenk, C.J.

    2005-01-01

    Petroleum produced from the Barbados accretionary prism (at Woodbourne Field on Barbados) is interpreted as generated from Cretaceous marine shale deposited under normal salinity and dysoxic conditions rather than from a Tertiary source rock as previously proposed. Barbados oils correlate with some oils from eastern Venezuela and Trinidad that are positively correlated to extracts from Upper Cretaceous La Luna-like source rocks. Three distinct groups of Barbados oils are recognized based on thermal maturity, suggesting petroleum generation occurred at multiple levels within the Barbados accretionary prism. Biodegradation is the most significant process affecting Barbados oils resulting in increased sulfur content and decreased API gravity. Barbados gases are interpreted as thermogenic, having been co-generated with oil, and show mixing with biogenic gas is limited. Gas biodegradation occurred in two samples collected from shallow reservoirs at the Woodbourne Field. The presence of Cretaceous source rocks within the Barbados accretionary prism suggests that greater petroleum potential exists regionally, and perhaps further southeast along the passive margin of South America. Likewise, confirmation of a Cretaceous source rock indicates petroleum potential exists within the Barbados accretionary prism in reservoirs that are deeper than those from Woodbourne Field.

  4. User-Design: A Case Application in Health Care Training.

    ERIC Educational Resources Information Center

    Carr-Chellman, Alison; Cuyar, Craig; Breman, Jeroen

    1998-01-01

    Discussion of user-design as a theoretical process for creating training, software, and computer systems focuses on a case study that describes user-design methodology in home health care through the context of diffusing a new laptop patient-record-keeping system with home nurses. Research needs and implications for the design process are…

  5. Feasibility study for hydrocarbon complex in southern seaboard. Petroleum Authority of Thailand

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This study, conducted by Fluor Daniel, was funded by the U.S. Trade and Development Agency, on behalf of the Petroleum Authority of Thailand. The primary objective of the study was to investigate the economic viability of the related facilities and determine how each could help to industrialize and build up the Southern Seaboard area of Thailand. The focus of the report is in three areas including; Crude Oil Transportation System, Refinery, and Petrochemical Complex. Another objective of the study was to offer an alternative for large crude carrier traffic by proposing the completion of a crude oil pipeline. The reportmore » is divided into the following sections: (1) Executive Summary; (2) Introduction; (3) Crude Oil Transportation System; (4) Refinery Project; (5) Petrochemical Complex; (6) Key Issues & Considerations; (7) Financial Evaluations; (8) Summary & Conclusions.« less

  6. Blood concentrations of new designer benzodiazepines in forensic cases.

    PubMed

    Høiseth, Gudrun; Tuv, Silja Skogstad; Karinen, Ritva

    2016-11-01

    A number of new designer benzodiazepines have reached the illegal drug market over the past years. Toxicological interpretation of concentrations of these drugs in blood is quite challenging as very limited human data have previously been published. The aim of this study was to report blood concentrations of new designer benzodiazepines in a population of drugged drivers as well as some other criminal offenders, and to relate this to clinical impairment. The present material represents cases involving new designer benzodiazepines (clonazolam, diclazepam, flubromazepam, flubromazolam and pyrazolam) and etizolam, submitted for analyses during the period July 1, 2013-May 31, 2016. Analyses were performed using an ultra-performance liquid chromatography-tandem mass spectrometry method. Blood concentrations and results from the clinical test of impairment are reported. New designer benzodiazepines were detected in 77 cases during the study period. The median (range) concentrations were 0.012mg/L (0.00048-0.10) for flubromazolam (n=25), 0.055mg/L (0.0047-1.2) for flubromazepam (n=24), 0.013mg/L (0.0021-0.057) for diclazepam (n=15), 0.050mg/L (0.019-0.17) for etizolam (n=14), 0.0053mg/L (0.0019-0.011) for clonazolam (n=7) and 0.074mg/L for pyrazolam (n=1). In six cases, designer benzodiazepines were the only drugs detected in blood, and in two of those cases, the physician had given the conclusion of "considerably impaired" upon performing the clinical test for impairment. Given the lack of previously published data on human concentrations, results presented in this study could be helpful in interpretation of blood concentrations of new designer benzodiazepines. This is crucial for the assessment of the importance of toxicological results in suspected drugged drivers, rape victims, etc. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  7. 30 CFR 218.101 - Royalty and rental remittance (naval petroleum reserves).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Royalty and rental remittance (naval petroleum... INCENTIVES Oil and Gas, Onshore § 218.101 Royalty and rental remittance (naval petroleum reserves). Remittance covering payments of royalty or rental on naval petroleum reserves must be accomplished by...

  8. 30 CFR 1218.101 - Royalty and rental remittance (naval petroleum reserves).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Royalty and rental remittance (naval petroleum... CREDITS AND INCENTIVES Oil and Gas, Onshore § 1218.101 Royalty and rental remittance (naval petroleum reserves). Remittance covering payments of royalty or rental on naval petroleum reserves must be...

  9. USGS World Petroleum Assessment 2000: New Conventional Provinces

    USGS Publications Warehouse

    Ahlbrandt, T.S.; Klett, T.R.

    2000-01-01

    The USGS has completed a new assessment of the undiscovered oil and gas resources of the world. One hundred and five geologic provinces were analyzed for assessment. Assessment units (AU) that comprise Total Petroleum Systems (TPS) were identified and described for each of these provinces. The AU served as the basis for assessing undiscovered petroleum within these provinces, 157 TPS and 270 AU were assessed. Some of data included in the assessment include the cumulative percent of world known petroleum volume by ranked oil and gas provinces; undiscovered NGL; reserve growth of the worlds largest oil and gas fields; and world potential reserve growth for oil/gas/NGL.

  10. Analytical considerations for study design

    Treesearch

    Barry R. Noon; William M. Block

    1990-01-01

    Studies of the foraging behaviors of birds have been largely descriptive and comparative. One might then expect studies with similar objectives to have similar study designs but that is not the case. Papers in this symposium that focused specifically on study design contain a diversity of biological perspectives. Similarly, there is no accord among statisticians on...

  11. Petroleum taxation and efficiency: the Canadian system in question

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wahby, M.J.

    1983-08-01

    The question considered in this article is whether it is possible to have a tax that appropriates resource rents without imposing a penalty on potential petroleum production. It is submitted that a system of income taxes exists which partially fulfills the above requirements. The Canadian government has been moving towards this system of taxation since 1962 but its historical development has been slow. Topics discussed include: the efficient taxation of resource rents, a history of Canadian petroleum taxation, and the efficiency of the present petroleum tax system.

  12. Natural attenuation of petroleum hydrocarbons-a study of biodegradation effects in groundwater (Vitanovac, Serbia).

    PubMed

    Marić, Nenad; Matić, Ivan; Papić, Petar; Beškoski, Vladimir P; Ilić, Mila; Gojgić-Cvijović, Gordana; Miletić, Srđan; Nikić, Zoran; Vrvić, Miroslav M

    2018-01-20

    The role of natural attenuation processes in groundwater contamination by petroleum hydrocarbons is of intense scientific and practical interest. This study provides insight into the biodegradation effects in groundwater at a site contaminated by kerosene (jet fuel) in 1993 (Vitanovac, Serbia). Total petroleum hydrocarbons (TPH), hydrochemical indicators (O 2 , NO 3 - , Mn, Fe, SO 4 2- , HCO 3 - ), δ 13 C of dissolved inorganic carbon (DIC), and other parameters were measured to demonstrate biodegradation effects in groundwater at the contaminated site. Due to different biodegradation mechanisms, the zone of the lowest concentrations of electron acceptors and the zone of the highest concentrations of metabolic products of biodegradation overlap. Based on the analysis of redox-sensitive compounds in groundwater samples, redox processes ranged from strictly anoxic (methanogenesis) to oxic (oxygen reduction) within a short distance. The dependence of groundwater redox conditions on the distance from the source of contamination was observed. δ 13 C values of DIC ranged from - 15.83 to - 2.75‰, and the most positive values correspond to the zone under anaerobic and methanogenic conditions. Overall, results obtained provide clear evidence on the effects of natural attenuation processes-the activity of biodegradation mechanisms in field conditions.

  13. Paired split-plot designs of multireader multicase studies.

    PubMed

    Chen, Weijie; Gong, Qi; Gallas, Brandon D

    2018-07-01

    The widely used multireader multicase ROC study design for comparing imaging modalities is the fully crossed (FC) design: every reader reads every case of both modalities. We investigate paired split-plot (PSP) designs that may allow for reduced cost and increased flexibility compared with the FC design. In the PSP design, case images from two modalities are read by the same readers, thereby the readings are paired across modalities. However, within each modality, not every reader reads every case. Instead, both the readers and the cases are partitioned into a fixed number of groups and each group of readers reads its own group of cases-a split-plot design. Using a [Formula: see text]-statistic based variance analysis for AUC (i.e., area under the ROC curve), we show analytically that precision can be gained by the PSP design as compared with the FC design with the same number of readers and readings. Equivalently, we show that the PSP design can achieve the same statistical power as the FC design with a reduced number of readings. The trade-off for the increased precision in the PSP design is the cost of collecting a larger number of truth-verified patient cases than the FC design. This means that one can trade-off between different sources of cost and choose a least burdensome design. We provide a validation study to show the iMRMC software can be reliably used for analyzing data from both FC and PSP designs. Finally, we demonstrate the advantages of the PSP design with a reader study comparing full-field digital mammography with screen-film mammography.

  14. The Design and Organisation Features of Two Online Courses: A Case Study of Their Emergence and Evolution

    ERIC Educational Resources Information Center

    Richards, Kari

    2017-01-01

    This study reports the findings of a qualitative case study that examined how elements of design and organization were conceptualized and enacted in two graduate level online courses, and, how these conceptualizations and enactments evolved. Data was collected through interviews and "think-alouds" with the course instructors and through…

  15. Enhancing the hermeneutic single-case efficacy design: Bridging the research-practice gap.

    PubMed

    Wall, Jessie M; Kwee, Janelle L; Hu, Monica; McDonald, Marvin J

    2017-09-01

    Systematic case study designs are emerging as alternative paradigm strategies for psychotherapy and social science research. Through enhanced sensitivity to context, these designs examine idiographic profiles of causal processes. We specifically advocate the use of the hermeneutic single-case efficacy design (HSCED). HSCED has recently been used to investigate the efficacy of an existing therapy with a new population (Observed and Experiential Integration for athlete performance barriers) and an emerging therapy (Lifespan Integration Therapy). We describe innovations in HSCED that were implemented for these studies. These developments include (a) integrating psychotherapists as case developers, (b) incorporating multiple cases in one investigation, and (c) tailoring the repertoire of assessment tools. These extensions strategically incorporated principles of contextual paradigms in HSCED, thus complementing single-case designs that neglect idiographic contexts. We discuss recommendations for using HSCED in practice-based research, highlighting its potential as a bridge to address the research-practice gap.

  16. 49 CFR 393.69 - Liquefied petroleum gas systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Protection Association, Battery March Park, Quincy, MA 02269, as follows: (1) A fuel system installed before... ACCESSORIES NECESSARY FOR SAFE OPERATION Fuel Systems § 393.69 Liquefied petroleum gas systems. (a) A fuel system that uses liquefied petroleum gas as a fuel for the operation of a motor vehicle or for the...

  17. Environmental Impacts of Petroleum Production: Initial Results from the Osage-Skiatook Petroleum Environmental Research Sites, Osage County, Oklahoma

    USGS Publications Warehouse

    Kharaka, Yousif K.; Otton, James K.

    2003-01-01

    Exploration for and production of petroleum have caused major detrimental impacts to soils, surface and ground waters, and the local ecosystems in the United States. These impacts arise primarily from the improper disposal of large volumes of saline water produced with oil and gas, from accidental hydrocarbon and produced water releases, and from abandoned oil wells that were not correctly sealed. It is important to understand the long-term and short-term effects of produced water and hydrocarbon releases from these sites in order to develop risk-based remediation plans. Remediation is particularly needed in aging and depleted fields where land use is changing from petroleum production to residential, agricultural or recreational uses. About 20 scientists from the USGS and other governmental agencies and academia are involved in a multidisciplinary investigation to study the transport, fate, and natural attenuation of inorganic salts, trace metals, organic compounds and radionuclides present in produced water, and their impacts at the Osage-Skiatook Petroleum Environmental Research (OSPER) 'A' and 'B' sites, located on the Osage Reservation in Osage County, Oklahoma. Stakeholders in the project include the Osage Nation, which holds the mineral rights, the Bureau of Indian Affairs with trust responsibility, and the Army Corps of Engineers, which owns the surface rights at these sites and manages adjacent Skiatook Lake. The 4250-hectare Skiatook Lake provides drinking water to local Tulsa suburban communities and a rural water district, and offers recreational fishing and boating opportunities to tens of thousands of visitors each year. Approximately 1.5 and 1.0 hectare of land at the OSPER 'A' (depleted Lester lease) and 'B' (active Branstetter lease) sites, respectively, are affected by salt scarring, tree kills, soil salinization and brine and petroleum contamination due to the leakage of produced water and associated hydrocarbons from brine pits and accidental

  18. Review of oil families and their petroleum systems of the Williston Basin

    USGS Publications Warehouse

    Lillis, Paul G.

    2013-01-01

    Oil bulk properties such as API gravity, sulfur content, and pour point are much underutilized in the recent geochemical literature and are found to be useful here in differentiating oil families. The Red River petroleum system has two oil families that can be differentiated based on pour point. The oils in the Madison petroleum system can be divided into two families based on API gravity-sulfur content relationships, with one family derived from Type II-S kerogen and the other family derived from Type II kerogen with medium sulfur content. The Tyler petroleum system of the Williston Basin may be distinguished from the Heath-Tyler petroleum system in central Montana based on differences in geology and petroleum geochemistry, with Tyler petroleum system oils having a higher pour point and lower sulfur content.

  19. Predicting recreational fishing use of offshore petroleum platforms in the Central Gulf of Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gordon, W.R. Jr.

    1987-01-01

    This study is based on the premise that properly sited artificial reefs for optimal human recreational use, a predictive model based upon the marine travel patterns and behavior of marine recreational fishermen, is needed. This research used data gathered from a previous study that addressed the recreational fishing use of offshore oil and gas structures (Ditton and Auyong 1984); on-site data were also collected. The primary research objective was to generate a predictive model that can be applied to artificial-reef development efforts elsewhere. This study investigated the recreational-user patterns of selected petroleum platforms structures in the Central Gulf of Mexico.more » The petroleum structures offshore from the Louisiana coastline provide a unique research tool. Although intended to facilitate the exploration and recovery of hydrocarbons, petroleum platforms also serve as defacto artificial reefs, providing habitat for numerous species of fish and other marine life. Petroleum platforms were found to be the principal fishing destinations within the study area. On-site findings reveal that marine recreational fishermen were as mobile on water, as they are on land. On-site findings were used to assist in the development of a predictive model.« less

  20. National Petroleum Reserve-Alaska (NPRA) core images and well data

    USGS Publications Warehouse

    Houseknecht, D. W.

    2002-01-01

    This report contains photographic images and data from petroleum exploration wells drilled within and near the National Petroleum Reserve-Alaska (NPRA). The volume is organized into six chapters, each of which contains images and well data (including a GIS project of public domain cores) pertinent to the geology and petroleum potential of NPRA. This product is a compilation of data not available elsewhere and contains limited interpretive material.

  1. Introducing a design exigency to promote student learning through assessment: A case study.

    PubMed

    Grealish, Laurie A; Shaw, Julie M

    2018-02-01

    Assessment technologies are often used to classify student and newly qualified nurse performance as 'pass' or 'fail', with little attention to how these decisions are achieved. Examining the design exigencies of classification technologies, such as performance assessment technologies, provides opportunities to explore flexibility and change in the process of using those technologies. Evaluate an established assessment technology for nursing performance as a classification system. A case study analysis that is focused on the assessment approach and a priori design exigencies of performance assessment technology, in this case the Australian Nursing Standards Assessment Tool 2016. Nurse assessors are required to draw upon their expertise to judge performance, but that judgement is described as a source of bias, creating confusion. The definition of satisfactory performance is 'ready to enter practice'. To pass, the performance on each criterion must be at least satisfactory, indicating to the student that no further improvement is required. The Australian Nursing Standards Assessment Tool 2016 does not have a third 'other' category, which is usually found in classification systems. Introducing a 'not yet competent' category and creating a two-part, mixed methods assessment process can improve the Australian Nursing Standards Assessment Tool 2016 assessment technology. Using a standards approach in the first part, judgement is valued and can generate learning opportunities across a program. Using a measurement approach in the second part, student performance can be 'not yet competent' but still meet criteria for year level performance and a graded pass. Subjecting the Australian Nursing Standards Assessment Tool 2016 assessment technology to analysis as a classification system provides opportunities for innovation in design. This design innovation has the potential to support students who move between programs and clinicians who assess students from different

  2. The harm of petroleum-polluted soil and its remediation research

    NASA Astrophysics Data System (ADS)

    Wang, Shuguang; Xu, Yan; Lin, Zhaofeng; Zhang, Jishi; Norbu, Namkha; Liu, Wei

    2017-08-01

    Land resources are the foundation of human's survival and development, and it's one of the most valuable natural resources of each country. In view of the serious problems of petroleum pollution to soil caused during the exploration and development processes, this article based on a large number of literature researches, firstly discussed the compositions and properties of petroleum contaminants, secondly investigated some restoration methods for the current situation of petroleum polluted soil, compared and analyzed the advantages and disadvantages of three kinds of bioremediation technologies. Finally, according to the deficiencies of previous research and existing problems, made an outlook of the physical and chemical remediation, bioremediation, and microbe-plant remediation, to provide some enlightenments for petroleum-contaminated soil remediation.

  3. Case-based reasoning in design: An apologia

    NASA Technical Reports Server (NTRS)

    Pulaski, Kirt

    1990-01-01

    Three positions are presented and defended: the process of generating solutions in problem solving is viewable as a design task; case-based reasoning is a strong method of problem solving; and a synergism exists between case-based reasoning and design problem solving.

  4. Toxicological assessment of green petroleum coke.

    PubMed

    McKee, Richard H; Herron, Deborah; Beatty, Patrick; Podhasky, Paula; Hoffman, Gary M; Swigert, James; Lee, Carol; Wong, Diana

    2014-01-01

    Green petroleum coke is primarily inorganic carbon with some entrained volatile hydrocarbon material. As part of the petroleum industry response to the high production volume challenge program, the potential for reproductive effects was assessed in a subchronic toxicity/reproductive toxicity screening test in rats (OECD 421). The repeated-dose portion of the study provided evidence for dust accumulation and inflammatory responses in rats exposed to 100 and 300 mg/m(3) but there were no effects at 30 mg/m(3). In the reproductive toxicity screen, the frequency of successful matings was reduced in the high exposure group (300 mg/m(3)) and was not significantly different from control values but was outside the historical experience of the laboratory. The postnatal observations (external macroscopic examination, body weight, and survival) did not indicate any treatment-related differences. Additional tests conducted to assess the potential hazards to aquatic (fish, invertebrates, and algae) and soil dwelling organisms (earthworms and vascular plants) showed few effects at the maximum loading rates of 1000 mg coke/L in aquatic studies and 1000 mg coke/kg soil in terrestrial studies. The only statistically significant finding was an inhibition of algal growth measured as either biomass or growth rate.

  5. EIA model documentation: Petroleum market model of the national energy modeling system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-12-28

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA`s legal obligation to provide adequate documentation in support of its models. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supplymore » for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.« less

  6. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 4. Boston Arts Academy

    ERIC Educational Resources Information Center

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  7. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 6. Perspectives Charter School

    ERIC Educational Resources Information Center

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  8. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 7. TechBoston Academy

    ERIC Educational Resources Information Center

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  9. Clean Cities: Building Partnerships to Reduce Petroleum Use in Transportation (Brochure)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2012-03-01

    This fact sheet provides an overview of the U.S. Department of Energy's Clean Cities program, which builds partnerships to reduce petroleum use in transportation in communities across the country. The U.S. Department of Energy's Clean Cities initiative advances the nation's economic, environmental, and energy security by supporting local actions to reduce petroleum consumption in transportation. Clean Cities accomplishes this work through the activities of nearly 100 local coalitions. These coalitions provide resources and technical assistance in the deployment of alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies, as they emerge. Clean Cities overarching goal ismore » to reduce U.S. petroleum use by 2.5 billion gallons per year by 2020. To achieve this goal, Clean Cities employs three strategies: (1) Replace petroleum with alternative and renewable fuels, including natural gas, propane, electricity, ethanol, biodiesel, and hydrogen; (2) Reduce petroleum consumption through smarter driving practices and fuel economy improvements; and (3) Eliminate petroleum use through idle reduction and other fuel-saving technologies and practices.« less

  10. Effects of freshwater petroleum contamination on amphibian hatching and metamorphosis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mahaney, P.A.

    1994-02-01

    This study examined the effects of freshwater petroleum contamination on amphibian reproduction. The primary objectives were to assess the potential environmental and physiological impacts of runoff petroleum products on amphibians, using the green tree frog (Hyla cinerea) as a target species and engine crankcase oil as a contaminant. Egg hatching success, tadpole growth, and successful metamorphosis were measured in four concentrations of oil. The effects of oil on food source was also studied. Hatching success was not measurably influenced by the presence of oil. Tadpole and alga growth were negatively associated with the presence of oil. No tadpoles from themore » high concentration of oil treatments successfully metamorphosed.« less

  11. Petroleum Diesel Fuel and Linseed Oil Mixtures as Engine Fuels

    NASA Astrophysics Data System (ADS)

    Markov, V. A.; Kamaltdinov, V. G.; Savastenko, A. A.

    2018-01-01

    The actual problem is the use of alternative biofuels in automotive diesel engines. Insufficiently studied are the indicators of toxicity of exhaust gases of these engines operating on biofuel. The aim of the study is to identify indicators of the toxicity of exhaust gases when using of petroleum diesel fuel and linseed oil mixtures as a fuel for automotive diesel engines. Physical and chemical properties of linseed oil and its mixtures with petroleum diesel fuel are considered. Experimental researches of D-245.12C diesel are carried out on mixtures of diesel fuel and corn oil with a different composition. An opportunity of exhaust toxicity indexes improvement using these mixtures as a fuel for automobiles engine is shown.

  12. Methodology Series Module 2: Case-control Studies.

    PubMed

    Setia, Maninder Singh

    2016-01-01

    Case-Control study design is a type of observational study. In this design, participants are selected for the study based on their outcome status. Thus, some participants have the outcome of interest (referred to as cases), whereas others do not have the outcome of interest (referred to as controls). The investigator then assesses the exposure in both these groups. The investigator should define the cases as specifically as possible. Sometimes, definition of a disease may be based on multiple criteria; thus, all these points should be explicitly stated in case definition. An important aspect of selecting a control is that they should be from the same 'study base' as that of the cases. We can select controls from a variety of groups. Some of them are: General population; relatives or friends; and hospital patients. Matching is often used in case-control control studies to ensure that the cases and controls are similar in certain characteristics, and it is a useful technique to increase the efficiency of the study. Case-Control studies can usually be conducted relatively faster and are inexpensive - particularly when compared with cohort studies (prospective). It is useful to study rare outcomes and outcomes with long latent periods. This design is not very useful to study rare exposures. Furthermore, they may also be prone to certain biases - selection bias and recall bias.

  13. Methodology Series Module 2: Case-control Studies

    PubMed Central

    Setia, Maninder Singh

    2016-01-01

    Case-Control study design is a type of observational study. In this design, participants are selected for the study based on their outcome status. Thus, some participants have the outcome of interest (referred to as cases), whereas others do not have the outcome of interest (referred to as controls). The investigator then assesses the exposure in both these groups. The investigator should define the cases as specifically as possible. Sometimes, definition of a disease may be based on multiple criteria; thus, all these points should be explicitly stated in case definition. An important aspect of selecting a control is that they should be from the same ‘study base’ as that of the cases. We can select controls from a variety of groups. Some of them are: General population; relatives or friends; and hospital patients. Matching is often used in case-control control studies to ensure that the cases and controls are similar in certain characteristics, and it is a useful technique to increase the efficiency of the study. Case-Control studies can usually be conducted relatively faster and are inexpensive – particularly when compared with cohort studies (prospective). It is useful to study rare outcomes and outcomes with long latent periods. This design is not very useful to study rare exposures. Furthermore, they may also be prone to certain biases – selection bias and recall bias. PMID:27057012

  14. Genetic features of petroleum systems in rift basins of eastern China

    USGS Publications Warehouse

    Qiang, J.; McCabe, P.J.

    1998-01-01

    Most oil-bearing basins in eastern China are Mesozoic-Cenozoic continental rifts which have played a habitat for oil and gas in China. Investigation of the petroleum systems may give a better understanding of the oil and gas habitats in these basins. Of the essential elements of the petroleum system, the source rock is the most important in rift basins. However, rift tectonic evolution controls all the essential elements and processes nevessary for a petroleum system. A four stage evolution model is suggested for the controls in the rift basin. A rift basin may consist of sub-basins, depressions, sub-depressions, and major, moderate, and minor uplifts. A depression or sub-depression has its own depocentre (mainly occupied by source rock) and all kinds of lacustrine sediments, and thus has all the essential elements of a petroleum system. However, only those depressions or sub-depressions which are rich in organic matter and deeply buried to generate oil and gas form petroleum systems. Immature oil, another characteristic, complicates the petroleum system in the rift basins. Three types of oil and gas habitats are described as a result of this analysis of the petroleum systems of the 26 largest oil and gas fields discovered in eastern China rift basins: uplifts between oil source centres are the most prospective areas for oil and gas accumulations, slopes connecting oil source centres and uplifts are the second, and the third type is subtle traps in the soil source centre.Most oil-bearing basins in eastern China are Mesozoic-Cenozoic continental rifts which have played a habitat for oil and gas in China. Investigation of the petroleum systems may give a better understanding of the oil and gas habitats in these basins. Of the essential elements of the petroleum system, the source rock is the most important in rift basins. However, rift tectonic evolution controls all the essential elements and processes necessary for a petroleum system. A four stage evolution model

  15. Comparative toxicity and mutagenicity of soy-biodiesel and petroleum-diesel emissions: overview of studies from the U.S. EPA, Research Triangle Park, NC.

    PubMed

    Madden, Michael C

    2015-01-01

    Biodiesel use as a fuel is increasing globally as an alternate to petroleum sources. To comprehensively assess the effects of the use of biodiesel as an energy source, end stage uses of biodiesel such as the effects of inhalation of combusted products on human health must be incorporated. To date, few reports concerning the toxicological effects of the emissions of combusted biodiesel or blends of biodiesel on surrogates of health effects have been published. The relative toxicity of the combusted biodiesel emissions compared to petroleum diesel emissions with short term exposures is also not well known. To address the paucity of findings on the toxicity of combusted biodiesel emissions, studies were undertaken at the U.S. Environmental Protection Agency laboratories in Research Triangle Park, North Carolina. The studies used a variety of approaches with nonhuman animal models to examine biological responses of the lung and cardiovascular systems induced by acute and repeated exposures to pure biodiesel and biodiesel blended with petroleum diesel. Effects of the emissions on induction of mutations in bacterial test strains and mammalian DNA adducts were also characterized and normalized to engine work load. The emissions were characterized as to the physicochemical composition in order to determine the magnitude of the differences among the emissions utilized in the studies. This article summarizes the major finding of these studies which are contained within this special issue of Inhalation Toxicology. The findings provided in these articles provide information about the toxicity of biodiesel emissions relative to petroleum diesel emissions and which can be utilized in a life cycle analyses of the effects of increased biodiesel usage.

  16. SWOT analysis of program design and implementation: a case study on the reduction of maternal mortality in Afghanistan.

    PubMed

    Ahmadi, Qudratullah; Danesh, Homayoon; Makharashvili, Vasil; Mishkin, Kathryn; Mupfukura, Lovemore; Teed, Hillary; Huff-Rousselle, Maggie

    2016-07-01

    This case study analyzes the design and implementation of the Basic Package of Health Services (BPHS) in Afghanistan by synthesizing the literature with a focus on maternal health services. The authors are a group of graduate students in the Brandeis University International Health Policy and Management Program and Sustainable International Development Program who used the experience in Afghanistan to analyze an example of successfully implementing policy; two of the authors are Afghan physicians with direct experience in implementing the BPHS. Data is drawn from a literature review, and a unique aspect of the case study is the application of the business-oriented SWOT analysis to the design and implementation of the program that successfully targeted lowering maternal mortality in Afghanistan. It provides a useful example of how SWOT analysis can be used to consider the reasons for, or likelihood of, successful or unsuccessful design and implementation of a policy or program. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  17. Single-case research design in pediatric psychology: considerations regarding data analysis.

    PubMed

    Cohen, Lindsey L; Feinstein, Amanda; Masuda, Akihiko; Vowles, Kevin E

    2014-03-01

    Single-case research allows for an examination of behavior and can demonstrate the functional relation between intervention and outcome in pediatric psychology. This review highlights key assumptions, methodological and design considerations, and options for data analysis. Single-case methodology and guidelines are reviewed with an in-depth focus on visual and statistical analyses. Guidelines allow for the careful evaluation of design quality and visual analysis. A number of statistical techniques have been introduced to supplement visual analysis, but to date, there is no consensus on their recommended use in single-case research design. Single-case methodology is invaluable for advancing pediatric psychology science and practice, and guidelines have been introduced to enhance the consistency, validity, and reliability of these studies. Experts generally agree that visual inspection is the optimal method of analysis in single-case design; however, statistical approaches are becoming increasingly evaluated and used to augment data interpretation.

  18. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

  19. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

  20. 10 CFR 490.804 - Eligible reductions in petroleum consumption.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...