Science.gov

Sample records for diacetylactis strain db0410

  1. Draft Genome Sequence of Lactococcus lactis subsp. lactis bv. diacetylactis CRL264, a Citrate-Fermenting Strain

    PubMed Central

    Zuljan, Federico; Espariz, Martín; Blancato, Victor S.; Esteban, Luis; Alarcón, Sergio

    2016-01-01

    We report the draft genome sequence of Lactococcus lactis subsp. lactis bv. diacetylactis CRL264, a natural strain isolated from artisanal cheese from northwest Argentina. L. lactis subsp. lactis bv. diacetylactis is one of the most important microorganisms used as starter culture around the world. The CRL264 strain constitutes a model microorganism in the studies on the generation of aroma compounds (diacetyl, acetoin, and 2,3-butanediol) by lactic acid bacteria. Our genome analysis shows similar genetic organization to other available genomes of L. lactis bv. diacetylactis strains. PMID:26847906

  2. Draft Genome Sequence of Lactococcus lactis subsp. lactis bv. diacetylactis CRL264, a Citrate-Fermenting Strain.

    PubMed

    Zuljan, Federico; Espariz, Martín; Blancato, Victor S; Esteban, Luis; Alarcón, Sergio; Magni, Christian

    2016-01-01

    We report the draft genome sequence of Lactococcus lactis subsp. lactis bv. diacetylactis CRL264, a natural strain isolated from artisanal cheese from northwest Argentina. L. lactis subsp. lactis bv. diacetylactis is one of the most important microorganisms used as starter culture around the world. The CRL264 strain constitutes a model microorganism in the studies on the generation of aroma compounds (diacetyl, acetoin, and 2,3-butanediol) by lactic acid bacteria. Our genome analysis shows similar genetic organization to other available genomes of L. lactis bv. diacetylactis strains. PMID:26847906

  3. Draft Genome Sequence of the Moderately Heat-Tolerant Lactococcus lactis subsp. lactis bv. diacetylactis Strain GL2 from Algerian Dromedary Milk

    PubMed Central

    Gabed, Noujoud; Yang, Manli; Bey Baba Hamed, Mohamed; Drici, Habiba; Gross, Roy; Dandekar, Thomas

    2015-01-01

    Lactococcus lactis subsp. lactis bv. diacetylactis GL2 is a moderately thermotolerant lactic acid bacterium isolated from dromedary raw milk. Here, we present the draft genome sequence of this potential new dairy starter strain, which combines thermotolerance and the capacity to metabolize lactose, casein, and citrate. PMID:26586883

  4. Natural Strain

    NASA Technical Reports Server (NTRS)

    Freed, Alan D.

    1997-01-01

    Logarithmic strain is the preferred measure of strain used by materials scientists, who typically refer to it as the "true strain." It was Nadai who gave it the name "natural strain," which seems more appropriate. This strain measure was proposed by Ludwik for the one-dimensional extension of a rod with length l. It was defined via the integral of dl/l to which Ludwik gave the name "effective specific strain." Today, it is after Hencky, who extended Ludwik's measure to three-dimensional analysis by defining logarithmic strains for the three principal directions.

  5. Natural Strain

    NASA Technical Reports Server (NTRS)

    Freed, Alan D.

    1995-01-01

    The purpose of this paper is to present a consistent and thorough development of the strain and strain-rate measures affiliated with Hencky. Natural measures for strain and strain-rate, as I refer to them, are first expressed in terms of of the fundamental body-metric tensors of Lodge. These strain and strain-rate measures are mixed tensor fields. They are mapped from the body to space in both the Eulerian and Lagrangian configurations, and then transformed from general to Cartesian fields. There they are compared with the various strain and strain-rate measures found in the literature. A simple Cartesian description for Hencky strain-rate in the Lagrangian state is obtained.

  6. Strain Gage

    NASA Technical Reports Server (NTRS)

    1995-01-01

    HITEC Corporation developed a strain gage application for DanteII, a mobile robot developed for NASA. The gage measured bending forces on the robot's legs and warned human controllers when acceptable forces were exceeded. HITEC further developed the technology for strain gage services in creating transducers out of "Indy" racing car suspension pushrods, NASCAR suspension components and components used in motion control.

  7. Hip flexor strain - aftercare

    MedlinePlus

    Pulled hip flexor - aftercare; Hip flexor injury - aftercare; Hip flexor tear - aftercare; Iliopsoas strain - aftercare; Strained iliopsoas muscle - aftercare; Torn iliopsoas muscle - aftercare; Psoas strain - aftercare

  8. High temperature strain gage apparent strain compensation

    NASA Technical Reports Server (NTRS)

    Holmes, Harlan K.; Moore, T. C., Sr.

    1992-01-01

    Once an installed strain gage is connected to a strain indicating device and the instrument is balanced, a subsequent change in temperature of the gage installation will generally produce a resistance change in the gage. This purely temperature-induced resistance will be registered by the indicating device as a strain and is referred to as 'apparent strain' to distinguish it from strain due to applied stress. One desirable technique for apparent strain compensation is to employ two identical gages with identical mounting procedures which are connected with a 'half bridge' configuration where gages see the same thermal environment but only one experiences a mechanical strain input. Their connection in adjacent arms of the bridge will then balance the thermally induced apparent strains and, in principle, only the mechanical strain remains. Two approaches that implement this technique are discussed.

  9. Geobacteraceae strains and methods

    DOEpatents

    Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana

    2015-07-07

    Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.

  10. Muscle strain (image)

    MedlinePlus

    A muscle strain is the stretching or tearing of muscle fibers. A muscle strain can be caused by sports, exercise, a ... something that is too heavy. Symptoms of a muscle strain include pain, tightness, swelling, tenderness, and the ...

  11. Muscle strain treatment

    MedlinePlus

    Treatment - muscle strain ... Question: How do you treat a muscle strain ? Answer: Rest the strained muscle and apply ice for the first few days after the injury. Anti-inflammatory medicines or acetaminophen ( ...

  12. Strains and Sprains

    MedlinePlus

    ... Children's Sports Injuries Computer-Related Repetitive Stress Injuries Knee Injuries Broken Bones, Sprains, and Strains Strains and Sprains ... Pain Going to a Physical Therapist Hamstring Strain Knee Injuries Sports and Exercise Safety Dealing With Sports Injuries ...

  13. Program Calibrates Strain Gauges

    NASA Technical Reports Server (NTRS)

    Okazaki, Gary D.

    1991-01-01

    Program dramatically reduces personnel and time requirements for acceptance tests of hardware. Data-acquisition system reads output from Wheatstone full-bridge strain-gauge circuit and calculates strain by use of shunt calibration technique. Program nearly instantaneously tabulates and plots strain data against load-cell outputs. Modified to acquire strain data for other specimens wherever full-bridge strain-gauge circuits used. Written in HP BASIC.

  14. Superlattice strain gage

    DOEpatents

    Noel, Bruce W.; Smith, Darryl L.; Sinha, Dipen N.

    1990-01-01

    A strain gage comprising a strained-layer superlattice crystal exhibiting piezoelectric properties is described. A substrate upon which such a strained-layer superlattice crystal has been deposited is attached to an element to be monitored for strain. A light source is focused on the superlattice crystal and the light reflected from, passed through, or emitted from the crystal is gathered and compared with previously obtained optical property data to determine the strain in the element.

  15. Superlattice strain gage

    DOEpatents

    Noel, B.W.; Smith, D.L.; Sinha, D.N.

    1988-06-28

    A strain gage comprising a strained-layer superlattice crystal exhibiting piezoelectric properties is described. A substrate upon which such a strained-layer superlattice crystal has been deposited is attached to an element to be monitored for strain. A light source is focused on the superlattice crystal and the light reflected from, passed through, or emitted from the crystal is gathered and compared with previously obtained optical property data to determine the strain in the element. 8 figs.

  16. Miniature biaxial strain transducer

    NASA Technical Reports Server (NTRS)

    Hoffman, I. S. (Inventor)

    1976-01-01

    A reusable miniature strain transducer for use in the measurement of static or quasi-static, high level, biaxial strain on the surface of test specimens or structures was studied. Two cantilever arms, constructed by machining the material to appropriate flexibility, are self-aligning and constitute the transducing elements of the device. Used in conjunction with strain gages, the device enables testing beyond normal gage limits for high strains and number of load cycles. The device does not require conversion computations since the electrical output of the strain gages is directly proportional to the strain measured.

  17. Sprains and Strains

    MedlinePlus

    ... happens. A strain is a stretched or torn muscle or tendon. Tendons are tissues that connect muscle to bone. Twisting or pulling these tissues can ... suddenly or develop over time. Back and hamstring muscle strains are common. Many people get strains playing ...

  18. Strains and Sprains

    MedlinePlus

    ... move the injured part, and you might even think you have broken a bone. How Does a Strain or Sprain Happen? Strains often happen when you put a lot of pressure on a muscle or you push it too far, such as when lifting a heavy object. Strains may be more likely to happen if ...

  19. Can strain magnetize light?

    NASA Astrophysics Data System (ADS)

    2013-02-01

    Strain in photonic structures can induce pseudomagnetic fields and Landau levels. Nature Photonics spoke to Mordechai Segev, Mikael Rechtsman, Alexander Szameit and Julia Zeuner about their unique approach.

  20. Elevated temperature strain gages

    NASA Technical Reports Server (NTRS)

    Brittain, J. O.; Geslin, D.; Lei, J. F.

    1986-01-01

    One of the goals of the HOST Program is the development of electrical resistance strain gages for static strain measurements at temperatures equal to or greater than 1273 K. Strain gage materials must have a reproducible or predictable response to temperature, time and strain. It is the objective of this research to investigate criteria for the selection of materials for such applications through electrical properties studies. The results of the investigation of two groups of materials, refractory compounds and binary alloy solid solutions are presented.

  1. Thin film strain transducer

    NASA Technical Reports Server (NTRS)

    Rand, J. L. (Inventor)

    1984-01-01

    A strain transducer system and process for making the same is disclosed. A beryllium copper ring having four strain gages is electrically connected in Wheatstone bridge fashion to the output instrumentation. Tabs are bonded to a balloon or like surface with strain on the surface causing bending of a ring which provides an electrical signal through the gages proportional to the surface strain. A photographic pattern of a one half ring segment as placed on a sheet of beryllium copper for chem-mill etch formation is illustrated.

  2. Geodetic Strain Analysis Tool

    NASA Technical Reports Server (NTRS)

    Kedar, Sharon; Baxter, Sean C.; Parker, Jay W.; Webb, Frank H.; Owen, Susan E.; Sibthorpe, Anthony J.; Dong, Danan

    2011-01-01

    A geodetic software analysis tool enables the user to analyze 2D crustal strain from geodetic ground motion, and create models of crustal deformation using a graphical interface. Users can use any geodetic measurements of ground motion and derive the 2D crustal strain interactively. This software also provides a forward-modeling tool that calculates a geodetic velocity and strain field for a given fault model, and lets the user compare the modeled strain field with the strain field obtained from the user s data. Users may change parameters on-the-fly and obtain a real-time recalculation of the resulting strain field. Four data products are computed: maximum shear, dilatation, shear angle, and principal components. The current view and data dependencies are processed first. The remaining data products and views are then computed in a round-robin fashion to anticipate view changes. When an analysis or display parameter is changed, the affected data products and views are invalidated and progressively re-displayed as available. This software is designed to facilitate the derivation of the strain fields from the GPS and strain meter data that sample it to facilitate the understanding of the strengths and weaknesses of the strain field derivation from continuous GPS (CGPS) and other geodetic data from a variety of tectonic settings, to converge on the "best practices" strain derivation strategy for the Solid Earth Science ESDR System (SESES) project given the CGPS station distribution in the western U.S., and to provide SESES users with a scientific and educational tool to explore the strain field on their own with user-defined parameters.

  3. Mechanical strain isolator mount

    NASA Technical Reports Server (NTRS)

    James, Gordon E. (Inventor)

    1991-01-01

    Certain devices such as optical instruments must preserve their alignmental integrity while being subjected to mechanical strain. A mechanical strain isolator mount is provided to preserve the alignmental integrity of an alignment sensitive instrument. An alignment sensitive instrument is mounted on a rectangular base. Flexural legs are connected at their proximal ends to the rectangular base. Flexural legs are also spaced parallel to the sides. Mounting pads are connected to the legs at the distal end and the mechanical strain isolator mount is attached to the substrate by means of threaded bolts. When a mounting pad and its respective leg is subjected to lateral strain in either the X or Y direction via the substrate, the respective leg relieves the strain by bending in the direction of the strain. An axial strain on a mounting pad in the Z direction is relieved by a rotational motion of the legs in the direction of the strain. When the substrate is stress free, the flexural legs return to their original condition and thus preserve the original alignment integrity of the alignment sensitive instrument.

  4. Light intensity strain analysis

    NASA Technical Reports Server (NTRS)

    Williams, J. G. (Inventor)

    1973-01-01

    A process is described for the analysis of the strain field of structures subjected to large deformations involving a low modulus substrate having a high modulus, relatively thin coating. The optical properties of transmittance and reflectance are measured for the coated substrate while stressed and unstressed to indicate the strain field for the coated substrate.

  5. Strain gauge installation tool

    DOEpatents

    Conard, Lisa Marie

    1998-01-01

    A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  6. Mechanochromic polyurethane strain sensor

    NASA Astrophysics Data System (ADS)

    Cellini, F.; Khapli, S.; Peterson, S. D.; Porfiri, M.

    2014-08-01

    In this Letter, we study the mechanical and optical response of a thermoplastic polyurethane blended with 0.5 wt. % of bis(benzoxazolyl)stilbene dye. The mechanochromic behavior of the material is characterized in a uniaxial stress-relaxation test by simultaneously acquiring the applied force, mechanical deformation, and fluorescence emission. To offer insight into the stress-strain response of the polymer-dye blend, we adapt a classical nonlinear constitutive behavior for elastomeric materials that accounts for stress-induced softening. We correlate the fluorescent response with the mechanical strain to demonstrate the possibility of accurate strain sensing for a broad range of deformations during both loading and unloading.

  7. Strain gauge installation tool

    SciTech Connect

    Conard, Lisa Marie

    1997-12-01

    A tool and a method for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  8. What Are Sprains and Strains?

    MedlinePlus

    ... sprain, one or more ligaments is stretched or torn. What Causes a Sprain? Where Do Sprains Usually ... strain, a muscle or tendon is stretched or torn. What Causes Strains? A strain is caused by ...

  9. Nanowires enabling strained photovoltaics

    SciTech Connect

    Greil, J.; Bertagnolli, E.; Lugstein, A.; Birner, S.

    2014-04-21

    Photovoltaic nano-devices have largely been relying on charge separation in conventional p-n junctions. Junction formation via doping, however, imposes major challenges in process control. Here, we report on a concept for photovoltaic energy conversion at the nano scale without the need for intentional doping. Our approach relies on charge carrier separation in inhomogeneously strained germanium nanowires (Ge NWs). This concept utilizes the strain-induced gradient in bandgap along tapered NWs. Experimental data confirms the feasibility of strain-induced charge separation in individual vapor-liquid-solid grown Ge NW devices with an internal quantum efficiency of ∼5%. The charge separation mechanism, though, is not inherently limited to a distinct material. Our work establishes a class of photovoltaic nano-devices with its opto-electronic properties engineered by size, shape, and applied strain.

  10. Sprains and Strains

    MedlinePlus

    ... people at risk for strains. Gymnastics, tennis, rowing, golf, and other sports that require extensive gripping can ... Trials and You was designed to help people learn more about clinical trials, why they matter, and ...

  11. MEMS Graphene Strain Sensor

    NASA Astrophysics Data System (ADS)

    Young, Clinton Wen-Chieh

    Graphene is a two dimensional honeycomb structure of sp2 hybridized carbon atoms that has possibilities in many applications due to its excellent mechanical and electrical properties. One application for Graphene is in the field of sensors. Graphene's electronic properties do not degrade when it undergoes mechanical strain which is advantageous for strain sensors. In this thesis, certain properties, such as the piezo-resistivity and flexibility, of graphene will be explored to show how they can be utilized to make a strain sensing device. Our original fabrication process of patterning graphene and the transfer process of graphene onto a flexible substrate will be discussed. The development of a stretchable and flexible graphene based rosette strain sensor will also be detailed. Developing a novel, reliable patterning process for the graphene is the first step to manufacture a stretchable graphene based sensor. The graphene was patterned using a photolithography and etching process that was developed by our research team, then it was transferred to a flexible polymer substrate with the use of a combination of soft lithography and wet etching of the Ni foil with ferric chloride solution. Graphene patterning is an essential step in fabricating reliable and sensitive sensors. With this process, graphene can be consistently patterned into different shapes and sizes. To utilize the graphene as the sensing material it also needs to be transferred onto a flexible substrate. The innovative transfer process developed by our research team consistently adheres graphene to a flexible PDMS substrate while removing the original nickel substrate. In the end, the graphene was transferred from the metal substrate to the desired flexible substrate. This process was repeated multiple times to create a stack and multilayer device. While many graphene-based strain sensors have been developed, they are uni-directional and can only measure the strain applied on the sensor in a principle

  12. Annihilation of strained vortices

    NASA Astrophysics Data System (ADS)

    Kimura, Yoshifumi

    2014-11-01

    As an initial stage of vortex reconnection, approach of nearly anti-parallel vortices has often been observed experimentally and studied numerically. Inspired by the recent experiment by Kleckner and Irvine on the dynamics of knotted vortices, we have studied the motion of two anti-parellel Burgers vortices driven by an axisymmetric linear straining field. We first extend the Burgers vortex solution which is a steady exact solution of the Navier-Stokes equation to a time-dependent exact solution. Then by superposing two such solutions, we investigate the annihilation process analytically. We can demonstrate that during the annihilation process the total vorticity decays exponentially on a time-scale proportional to the inverse of the rate of strain, even as the kinematic viscosity tends to 0. The analytic results are compared with the numerical simulations of two strained vortices with the vortex-vortex nonlinear interaction by Buntine and Pullin.

  13. The atomic strain tensor

    SciTech Connect

    Mott, P.H.; Argon, A.S. ); Suter, U.W. Massachusetts Institute of Technology, Cambridge, MA )

    1992-07-01

    A definition of the local atomic strain increments in three dimensions and an algorithm for computing them is presented. An arbitrary arrangement of atoms is tessellated in to Delaunay tetrahedra, identifying interstices, and Voronoi polyhedra, identifying atomic domains. The deformation gradient increment tensor for interstitial space is obtained from the displacement increments of the corner atoms of Delaunay tetrahedra. The atomic site strain increment tensor is then obtained by finding the intersection of the Delaunay tetrahedra with the Voronoi polyhedra, accumulating the individual deformation gradient contributions of the intersected Delaunay tetrahedra into the Voronoi polyhedra. An example application is discussed, showing how the atomic strain clarifies the relative local atomic movement for a polymeric glass treated at the atomic level. 6 refs. 10 figs.

  14. Strain isolated ceramic coatings

    NASA Technical Reports Server (NTRS)

    Tolokan, R. P.; Brady, J. B.; Jarrabet, G. P.

    1985-01-01

    Plasma sprayed ceramic coatings are used in gas turbine engines to improve component temperature capability and cooling air efficiency. A compliant metal fiber strain isolator between a plasma sprayed ceramic coating and a metal substrate improves ceramic durability while allowing thicker coatings for better insulation. Development of strain isolated coatings has concentrated on design and fabrication of coatings and coating evaluation via thermal shock testing. In thermal shock testing, five types of failure are possible: buckling failure im compression on heat up, bimetal type failure, isothermal expansion mismatch failure, mudflat cracking during cool down, and long term fatigue. A primary failure mode for thermally cycled coatings is designated bimetal type failure. Bimetal failure is tensile failure in the ceramic near the ceramic-metal interface. One of the significant benefits of the strain isolator is an insulating layer protecting the metal substrate from heat deformation and thereby preventing bimetal type failure.

  15. Diffusion on strained surfaces

    NASA Astrophysics Data System (ADS)

    Schroeder, M.; Wolf, D. E.

    1997-03-01

    The change of diffusion kinetics when elastic fields are present is discussed for diffusion on (001) surfaces of simple cubic, fcc and bcc lattices. All particles interact pairwise with a Lennard-Jones potential. The simple cubic lattice was stabilized by an anisotropic prefactor. It is found that generically compressive strain enhances diffusion whereas tensile strain increases the activation barrier. An approximately linear dependence of the barrier in a wide range of misfits is found. In heteroepitaxy, diffusion on top of large clusters is inhomogeneous and anisotropic. The kinetics close to edges and centers of islands are remarkably different. In many cases changes of binding energies are small compared to those of saddle point energies. Thermodynamic arguments (minimization of free energy) are not appropriate to describe diffusion on strained surfaces in these cases.

  16. Strain gauge installation tool

    DOEpatents

    Conard, L.M.

    1998-06-16

    A tool and a method are disclosed for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool. 6 figs.

  17. ConStrains identifies microbial strains in metagenomic datasets

    PubMed Central

    Luo, Chengwei; Knight, Rob; Siljander, Heli; Knip, Mikael; Xavier, Ramnik J; Gevers, Dirk

    2015-01-01

    An important fraction of microbial diversity is harbored in strain individuality, so identification of conspecific bacterial strains is imperative for improved understanding of microbial community functions. Limitations in bioinformatics and sequencing technologies have to date precluded strain identification owing to difficulties in phasing short reads to faithfully recover the original strain-level genotypes, which have highly similar sequences. We present ConStrains, an open-source algorithm that identifies conspecific strains from metagenomic sequence data and reconstructs the phylogeny of these strains in microbial communities. The algorithm uses single-nucleotide polymorphism (SNP) patterns in a set of universal genes to infer within-species structures that represent strains. Applying ConStrains to simulated and host-derived data sets provides insights into microbial community dynamics. PMID:26344404

  18. Local Strain Evaluation of Strained-SOI Structures

    NASA Astrophysics Data System (ADS)

    Usuda, Koji; Mizuno, Tomohisa; Numata, Toshinori; Tezuka, Tsutomu; Sugiyama, Naoharu; Moriyama, Yoshihiko; Nakaharai, Shu; Takagi, Shin-Ichi

    The strain relaxation within a strained-Si on SiGe on insulator (SGOI) structure might be one of the key issues in development of strained-Si MOSFET devices for high-performance ULSIs. In order to investigate the strain relaxation within the thin strained-Si layers, a new characterization technique to directly evaluate a local strain variation in the layers is required. Hence, we have developed the nano-beam electron diffraction (NBD) method which has a lateral resolution of 10 nm and a strain resolution of 0.1%. In this paper, we discuss a detailed investigation of whether the NBD method could be utilized to clarify a strain in a strained-Si layer on the SGOI structures.

  19. ConStrains identifies microbial strains in metagenomic datasets.

    PubMed

    Luo, Chengwei; Knight, Rob; Siljander, Heli; Knip, Mikael; Xavier, Ramnik J; Gevers, Dirk

    2015-10-01

    An important fraction of microbial diversity is harbored in strain individuality, so identification of conspecific bacterial strains is imperative for improved understanding of microbial community functions. Limitations in bioinformatics and sequencing technologies have to date precluded strain identification owing to difficulties in phasing short reads to faithfully recover the original strain-level genotypes, which have highly similar sequences. We present ConStrains, an open-source algorithm that identifies conspecific strains from metagenomic sequence data and reconstructs the phylogeny of these strains in microbial communities. The algorithm uses single-nucleotide polymorphism (SNP) patterns in a set of universal genes to infer within-species structures that represent strains. Applying ConStrains to simulated and host-derived datasets provides insights into microbial community dynamics. PMID:26344404

  20. The strained state cosmology

    NASA Astrophysics Data System (ADS)

    Tartaglia, Angelo

    2016-01-01

    Starting from some relevant facts concerning the behavior of the universe over large scale and time span, the analogy between the geometric approach of General Relativity and the classical description of an elastic strained material continuum is discussed. Extending the elastic deformation approach to four dimensions it is shown that the accelerated expansion of the universe is recovered. The strain field of space-time reproduces properties similar to the ones ascribed to the dark energy currently called in to explain the accelerated expansion. The strain field in the primordial universe behaves as radiation, but asymptotically it reproduces the cosmological constant. Subjecting the theory to a number of cosmological tests confirms the soundness of the approach and gives an optimal value for the one parameter of the model, i.e. the bulk modulus of the space-time continuum. Finally various aspects of the Strained State Cosmology (SSC) are discussed and contrasted with some non-linear massive gravity theories. The possible role of structure topological defects is also mentioned. The conclusion is that SSC is at least as good as the ΛCDM standard cosmology, giving a more intuitive interpretation of the physical nature of the phenomena.

  1. Strain gage barometric transmitter

    NASA Technical Reports Server (NTRS)

    Viton, P.

    1977-01-01

    A strain gage barometric transmitter for measuring the atmospheric pressure in severe environmental conditions is described. This equipment specifications are presented and its performance assessed. It is shown that this barometric sensor can measure the atmospheric pressure with a precision of 0.5 mb during a 6 month period.

  2. Accurate strain measurements in highly strained Ge microbridges

    NASA Astrophysics Data System (ADS)

    Gassenq, A.; Tardif, S.; Guilloy, K.; Osvaldo Dias, G.; Pauc, N.; Duchemin, I.; Rouchon, D.; Hartmann, J.-M.; Widiez, J.; Escalante, J.; Niquet, Y.-M.; Geiger, R.; Zabel, T.; Sigg, H.; Faist, J.; Chelnokov, A.; Rieutord, F.; Reboud, V.; Calvo, V.

    2016-06-01

    Ge under high strain is predicted to become a direct bandgap semiconductor. Very large deformations can be introduced using microbridge devices. However, at the microscale, strain values are commonly deduced from Raman spectroscopy using empirical linear models only established up to ɛ100 = 1.2% for uniaxial stress. In this work, we calibrate the Raman-strain relation at higher strain using synchrotron based microdiffraction. The Ge microbridges show unprecedented high tensile strain up to 4.9% corresponding to an unexpected Δω = 9.9 cm-1 Raman shift. We demonstrate experimentally and theoretically that the Raman strain relation is not linear and we provide a more accurate expression.

  3. The meaning of role strain.

    PubMed

    Ward, C R

    1986-01-01

    Explicating the meaning of the concept of role strain is important in role theory formulation, an area requiring further development to provide explanations and predictions for both patient and provider roles. In this analysis, the use of the term role strain is traced from the structural-functionalist and symbolic-interactionist perspectives. Descriptive, stipulative, and connotative definitions of role strain are derived, and necessary and relevant properties are proposed. Antecedent and intervening conditions for role strain are outlined from the literature. Role strain manifestations and empirical referents are presented, and an initial step is taken toward a theoretical formulation by defining role strain within the context of role stress. PMID:3079985

  4. Highly stretchable miniature strain sensor for large dynamic strain measurement

    DOE PAGESBeta

    Song, Bo; Yao, Shurong; Nie, Xu; Yu, Xun; Blecke, Jill

    2016-01-01

    In this paper, a new type of highly stretchable strain sensor was developed to measure large strains. The sensor was based on the piezo-resistive response of carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composite thin films. The piezo-resistive response of CNT composite gives accurate strain measurement with high frequency response, while the ultra-soft PDMS matrix provides high flexibility and ductility for large strain measurement. Experimental results show that the CNT/PDMS sensor measures large strains (up to 8 %) with an excellent linearity and a fast frequency response. The new miniature strain sensor also exhibits much higher sensitivities than the conventional foil strain gages,more » as its gauge factor is 500 times of that of the conventional foil strain gages.« less

  5. Highly stretchable miniature strain sensor for large dynamic strain measurement

    SciTech Connect

    Song, Bo; Yao, Shurong; Nie, Xu; Yu, Xun; Blecke, Jill

    2016-01-01

    In this paper, a new type of highly stretchable strain sensor was developed to measure large strains. The sensor was based on the piezo-resistive response of carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composite thin films. The piezo-resistive response of CNT composite gives accurate strain measurement with high frequency response, while the ultra-soft PDMS matrix provides high flexibility and ductility for large strain measurement. Experimental results show that the CNT/PDMS sensor measures large strains (up to 8 %) with an excellent linearity and a fast frequency response. The new miniature strain sensor also exhibits much higher sensitivities than the conventional foil strain gages, as its gauge factor is 500 times of that of the conventional foil strain gages.

  6. High temperature strain gages

    NASA Technical Reports Server (NTRS)

    Gregory, Otto J. (Inventor); You, Tao (Inventor)

    2011-01-01

    A ceramic strain gage based on reactively sputtered indium-tin-oxide (ITO) thin films is used to monitor the structural integrity of components employed in aerospace propulsion systems operating at temperatures in excess of 1500.degree. C. A scanning electron microscopy (SEM) of the thick ITO sensors reveals a partially sintered microstructure comprising a contiguous network of submicron ITO particles with well defined necks and isolated nanoporosity. Densification of the ITO particles was retarded during high temperature exposure with nitrogen thus stabilizing the nanoporosity. ITO strain sensors were prepared by reactive sputtering in various nitrogen/oxygen/argon partial pressures to incorporate more nitrogen into the films. Under these conditions, sintering and densification of the ITO particles containing these nitrogen rich grain boundaries was retarded and a contiguous network of nano-sized ITO particles was established.

  7. Novel strained superjunction VDMOS

    NASA Astrophysics Data System (ADS)

    Naugarhiya, Alok; Dubey, Shashank; Kondekar, Pravin N.

    2015-09-01

    In this paper, we have proposed novel strained superjunction (s-SJ) vertical double diffused MOS (VDMOS). Through channel engineering, we have introduced strain effects in s-SJ device using thin separate p-type silicon-germanium (p-SiGe) layer over silicon p-pillar. Further, we have designed process flow for the possible fabrication of s-SJ VDMOS. The proposed s-SJ devices fitted with less input capacitance (Cin) and 1.2∼3 times higher output current density than conventional SJ VDMOS. Therefore, 40% less gate charge (Qg) is required to turn-on the s-SJ VDMOS and Ron A is optimized in between 12% and 46%.

  8. Strain Release Amination

    PubMed Central

    Gianatassio, Ryan; Lopchuk, Justin M.; Wang, Jie; Pan, Chung-Mao; Malins, Lara R.; Prieto, Liher; Brandt, Thomas A.; Collins, Michael R.; Gallego, Gary M.; Sach, Neal W.; Spangler, Jillian E.; Zhu, Huichin; Zhu, Jinjiang; Baran, Phil S.

    2015-01-01

    To optimize drug candidates, modern medicinal chemists are increasingly turning to an unconventional structural motif: small, strained ring systems. However, the difficulty of introducing substituents such as bicyclo[1.1.1]pentanes, azetidines, or cyclobutanes often outweighs the challenge of synthesizing the parent scaffold itself. Thus, there is an urgent need for general methods to rapidly and directly append such groups onto core scaffolds. Here we report a general strategy to harness the embedded potential energy of effectively spring-loaded C–C and C–N bonds with the most oft-encountered nucleophiles in pharmaceutical chemistry, amines. Strain release amination can diversify a range of substrates with a multitude of desirable bioisosteres at both the early and late-stages of a synthesis. The technique has also been applied to peptide labeling and bioconjugation. PMID:26816372

  9. Interfacial residual thermal strain

    NASA Astrophysics Data System (ADS)

    Kasen, M.; Santoyo, R.

    A method has been developed for assessing the influence of polymer chemical composition and of processing parameters on the magnitude of residual stress developed in glass-fibre-reinforced composites subjected to various cure cycles and subsequently cooled to cryogenic temperatures. The test method was applied to nine resin types, including epoxy, vinyl ester, polyester, cyanate ester and phenolic formulations. Results suggest that polyester resin develops substantially less overall residual strain than do the other resin systems.

  10. Sports Hernia: Misdiagnosed Muscle Strain

    MedlinePlus

    ... Manipulative Treatment Becoming a DO Video Library Misdiagnosed Muscle Strain Can Be A Pain Page Content If ... speeds, sports hernias are frequently confused with common muscle strain ,” says Michael Sampson, DO, who practices in ...

  11. Genealogies of mouse inbred strains.

    PubMed

    Beck, J A; Lloyd, S; Hafezparast, M; Lennon-Pierce, M; Eppig, J T; Festing, M F; Fisher, E M

    2000-01-01

    The mouse is a prime organism of choice for modelling human disease. Over 450 inbred strains of mice have been described, providing a wealth of different genotypes and phenotypes for genetic and other studies. As new strains are generated and others become extinct, it is useful to review periodically what strains are available and how they are related to each other, particularly in the light of available DNA polymorphism data from microsatellite and other markers. We describe the origins and relationships of inbred mouse strains, 90 years after the generation of the first inbred strain. Given the large collection of inbred strains available, and that published information on these strains is incomplete, we propose that all genealogical and genetic data on inbred strains be submitted to a common electronic database to ensure this valuable information resource is preserved and used efficiently. PMID:10615122

  12. Construction of the Inbred Strain.

    PubMed

    Shinya, Minori

    2016-01-01

    Genetically homogeneous populations such as inbred strains are valuable experimental tools in various fields of biomedical analyses. In many animals, inbred strains are established by consecutive sib-pair mating for a minimum of 20 generations. As the generation proceeds, fitness of the population reduces usually. Therefore, in order to establish inbred strains, the important point is the selection of pairs in good condition at each generation. Here, I describe the procedure and tips for generating inbred strains in zebrafish. PMID:27464804

  13. Strain calibration of optical FBG-based strain sensors

    NASA Astrophysics Data System (ADS)

    Roths, Johannes; Wilfert, Andre; Kratzer, Peter; Jülich, Florian; Kuttler, Rolf

    2010-09-01

    A facility for strain sensitivity calibration of optical FBG-based strain sensors according to the German VDI/VDE 2660 guideline was established and characterized. Statistical analysis of several calibration measurement series performed with one single type of FBG strain sensor and application technique showed a reproducibility of 0.15%. Strain sensitivities for FBGs inscribed in two different types of optical fibres (GF1B and PR2008) showed significantly different strain sensitivities of k = 0.7885+/-0.0026 and k = 0.7758+/-0.0024, respectively.

  14. Strain balanced quantum posts

    SciTech Connect

    Alonso-Alvarez, D.; Alen, B.; Ripalda, J. M.; Llorens, J. M.; Taboada, A. G.; Briones, F.; Roldan, M. A.; Hernandez-Saz, J.; Hernandez-Maldonado, D.; Herrera, M.; Molina, S. I.

    2011-04-25

    Quantum posts are assembled by epitaxial growth of closely spaced quantum dot layers, modulating the composition of a semiconductor alloy, typically InGaAs. In contrast with most self-assembled nanostructures, the height of quantum posts can be controlled with nanometer precision, up to a maximum value limited by the accumulated stress due to the lattice mismatch. Here, we present a strain compensation technique based on the controlled incorporation of phosphorous, which substantially increases the maximum attainable quantum post height. The luminescence from the resulting nanostructures presents giant linear polarization anisotropy.

  15. Strain actuated aeroelastic control

    NASA Technical Reports Server (NTRS)

    Lazarus, Kenneth B.

    1992-01-01

    Viewgraphs on strain actuated aeroelastic control are presented. Topics covered include: structural and aerodynamic modeling; control law design methodology; system block diagram; adaptive wing test article; bench-top experiments; bench-top disturbance rejection: open and closed loop response; bench-top disturbance rejection: state cost versus control cost; wind tunnel experiments; wind tunnel gust alleviation: open and closed loop response at 60 mph; wind tunnel gust alleviation: state cost versus control cost at 60 mph; wind tunnel command following: open and closed loop error at 60 mph; wind tunnel flutter suppression: open loop flutter speed; and wind tunnel flutter suppression: closed loop state cost curves.

  16. [Echinococcus and strain concepts].

    PubMed

    Utük, Armağan Erdem; Simsek, Sami

    2008-01-01

    Hydatid disease (echinococcosis) is one of the most important parasitic zoonoses and remains a public health and economic problem all over the world. Echinococcus granulosus includes a number of genetic variants and, up to date, analyses of mitochondrial DNA sequences have identified ten distinct genetic types (genotypes G1-10). This categorization follows closely the pattern of strain variation emerging based on biological characteristics. The extensive variation in E. granulosus may influence life-cycle patterns, host specificity, development rate, antigenicity, transmission dynamics, sensitivity to chemotherapeutic agents, and pathology. In this review, the recent genetic characterizations of Echinococcus genus have been summarized. PMID:18351549

  17. Compensated High Temperature Strain Gage

    NASA Technical Reports Server (NTRS)

    1994-01-01

    A device for measuring strain in substrates at high temperatures in which the thermally induced apparent strain is nulled is described. Two gages are used, one active gage and one compensating gage. Both gages are placed on the substrate to be gaged; the active gage is attached such that it responds to mechanical and thermally induced apparent strain while the compensating gage is attached such that it does not respond to mechanical strain and and measures only thermally induced apparent strain. A thermal blanket is placed over the two gages to maintain the gages at the same temperature. The two gages are wired as adjacent arms of a wheatstone bridge which nulls the thermally induced apparent strain giving a true reading of the mechanical strain in the substrate.

  18. Geodetic strain measurements in Washington.

    USGS Publications Warehouse

    Savage, J.C.; Lisowski, M.; Prescott, W.H.

    1981-01-01

    Two new geodetic measurements of strain accumulation in the state of Washington for the interval 1972-1979 are reported. Near Seattle the average principal strain rates are 0.07 + or - 0.03 mu strain/yr N19oW and -0.13 + or - 0.02 mu strain/yr N71oE, and near Richland (south central Washington) the average principal strain rates are -0.02 + or - 0.01 mu strain/yr N36oW and -0.04 + or - 0.01 mu strain/yr N54oE. Extension is taken as positive, and the uncertainties quoted are standard deviations. A measurement of shear strain accumulation (dilation not determined) in the epoch 1914- 1966 along the north coast of Vancouver Island by the Geodetic Survey of Canada indicates a marginally significant accumulation of right-lateral shear (0.06 + or - 0.03 mu rad/yr) across the plate boundary (N40oW strike). Although there are significant differences in detail, these strain measurements are roughly consistent with a crude dislocation model that represents subduction of the Juan de Fuca plate. The observed accumulation of strain implies that large, shallow, thrust earthquakes should be expected off the coast of Washington and British Columbia. However, this conclusion is not easily reconciled with either observations of elevation change along the Washington coast or the focal mechanism solutions for shallow earthquakes in Washington. -Authors

  19. Inhomogeneous strains in small particles

    NASA Astrophysics Data System (ADS)

    Marks, L. D.

    1985-02-01

    This paper considers the evidence for strains in small particles. Firstly, the dynamical electron diffraction theory for dark field imaging of small particles is briefly reviewed, considering primarily the effects of strain on wedge crystals and identifying the fingerprint of strain contrast effects under strong beam conditions. Evidence included herein and from published papers by other authors clearly shows inhomogeneous strain effects in both multiply twinned particles and single crystals. Considering these results and earlier reports of lattice parameter changes, there are problems with the uniqueness of these analyses, and the strains in the small single crystals are thought more likely to be due to interfacial stresses or contaminants than any intrinsic particle effect; there are so many different origins of this type of strain that we cannot with confidence isolate a unique source. It is emphasised that the uniqueness of any interpretation of experimental results from small particles must be very carefully considered.

  20. Strain Engineering in Graphene

    NASA Astrophysics Data System (ADS)

    Castro Neto, Antonio

    2011-03-01

    Graphene is a unique example of a one atom thick metallic membrane. Hence, graphene brings together properties of soft and hard condensed matter systems. The elementary electronic excitations in graphene, the Dirac quasiparticles, couple in a singular way to structural distortions in the form of scalar and vector potentials. Therefore, graphene has an effective electrodynamics where structural deformations couple to the Dirac particles at equal footing to electric and magnetic fields. This so-called strain engineering of the electronic properties of graphene opens doors for a new paradigm in terms of electronic devices, where electronic properties can be manipulated at will using its membrane-like properties. I thank partial support from from DOE Grant DE-FG02-08ER46512 and ONR Grant MURI N00014-09-1-1063.

  1. Thermal strain imaging: a review

    PubMed Central

    Seo, Chi Hyung; Shi, Yan; Huang, Sheng-Wen; Kim, Kang; O'Donnell, Matthew

    2011-01-01

    Thermal strain imaging (TSI) or temporal strain imaging is an ultrasound application that exploits the temperature dependence of sound speed to create thermal (temporal) strain images. This article provides an overview of the field of TSI for biomedical applications that have appeared in the literature over the past several years. Basic theory in thermal strain is introduced. Two major energy sources appropriate for clinical applications are discussed. Promising biomedical applications are presented throughout the paper, including non-invasive thermometry and tissue characterization. We present some of the limitations and complications of the method. The paper concludes with a discussion of competing technologies. PMID:22866235

  2. Hydrogen production from microbial strains

    DOEpatents

    Harwood, Caroline S; Rey, Federico E

    2012-09-18

    The present invention is directed to a method of screening microbe strains capable of generating hydrogen. This method involves inoculating one or more microbes in a sample containing cell culture medium to form an inoculated culture medium. The inoculated culture medium is then incubated under hydrogen producing conditions. Once incubating causes the inoculated culture medium to produce hydrogen, microbes in the culture medium are identified as candidate microbe strains capable of generating hydrogen. Methods of producing hydrogen using one or more of the microbial strains identified as well as the hydrogen producing strains themselves are also disclosed.

  3. Strain in silicon nanowire beams

    NASA Astrophysics Data System (ADS)

    Ureña, Ferran; Olsen, Sarah H.; Šiller, Lidija; Bhaskar, Umesh; Pardoen, Thomas; Raskin, Jean-Pierre

    2012-12-01

    In this work, strain in silicon free standing beams loaded in uniaxial tension is experimentally and theoretically investigated for strain values ranging from 0 to 3.6%. The fabrication method allows multiple geometries (and thus strain values) to be processed simultaneously on the same wafer while being studied independently. An excellent agreement of strain determined by two non-destructive characterization techniques, Raman spectroscopy and mechanical displacement using scanning electron microscopy (SEM) markers, is found for all the sample lengths and widths. The measured data also show good agreement with theoretical predictions of strain based upon continuum mechanical considerations, giving validity to both measurement techniques for the entire range of strain values. The dependence of Young's modulus and fracture strain on size has also been analyzed. The Young's modulus is determined using SEM and compared with that obtained by resonance-based methods. Both methods produced a Young's modulus value close to that of bulk silicon with values obtained by resonance-based methods being slightly lower. Fracture strain is analyzed in 40 sets of samples with different beam geometries, yielding values up to 3.6%. The increase in fracture strain with decreasing beam width is compared with previous reports. Finally, the role of the surface on the mechanical properties is analyzed using UV and visible lasers having different penetration depths in silicon. The observed dependence of Raman shift on laser wavelength is used to assess the thermal conductivity of deformed silicon.

  4. Strain variation in corrugated graphene

    NASA Astrophysics Data System (ADS)

    Wang, Xuanye; Tantiwanichapan, Khwanchai; Christopher, Jason; Paiella, Roberto; Swan, Anna

    2015-03-01

    Raman spectroscopy is a powerful non-destructive technique for analyzing strain in graphene. Recently there has been interest in making corrugated graphene devices with varying spatial wavelengths Λ for plasmonic and THz applications. Transferring graphene onto corrugated substrates introduces strain, which if there was perfect clamping (high fraction) would cause a periodic strain variation. However, the strain variation for pattern size smaller than the diffraction limit λ makes it hard to precisely model the strain distribution. Here we present a detailed study on how strain varies in corrugated graphene with sub-diffraction limit periodicity Λ < λ. Mechanically exfoliated graphene was deposited onto sinusoidal shape silicon dioxide gratings with Λ=400 nm period using the pick and place transfer technique. We observed that the graphene is not rigidly clamped, but partially slides to relieve the strain. We model the linewidth variation to extract the local strain variation as well as the sliding in the presence of charge puddling in graphene. The method gives us a better understanding on graphene slippage and strain distribution in graphene on a corrugated substrate with sub-diffraction limit spatial period.

  5. Emerging Enteropathogenic Escherichia coli Strains?

    PubMed Central

    Irino, Kinue; Girão, Dennys M.; Girão, Valéria B.C.; Guth, Beatriz E.C.; Vaz, Tânia M.I.; Moreira, Fabiana C.; Chinarelli, Silvia H.; Vieira, Mônica A.M.

    2004-01-01

    Escherichia coli strains of nonenteropathogenic serogroups carrying eae but lacking the enteropathogenic E. coli adherence factor plasmid and Shiga toxin DNA probe sequences were isolated from patients (children, adults, and AIDS patients) with and without diarrhea in Brazil. Although diverse in phenotype and genotype, some strains are potentially diarrheagenic. PMID:15504277

  6. Hypothetical strain-free oligoradicals

    PubMed Central

    Hoffmann, Roald; Eisenstein, Odile; Balaban, Alexandru T.

    1980-01-01

    Several new classes of oligoradicals free of angle strain are suggested and examined by means of molecular orbital calculations. The collapse products of these hypothetical radicals are highly strained molecules. Various electronic strategies for the stabilization of these oligoradicals have been explored. PMID:16592882

  7. Difference Between Strain and Sprain.

    ERIC Educational Resources Information Center

    Connors, G. Patrick

    Provided in this description of the differences between a strain (damage to the muscle or tendon) and a sprain (damage to the ligament) are definitions of mild, moderate, and severe (first, second, and third degree) strains and sprains. A final caution is given that these are two separate and distinct problems and should be treated as such. (DC)

  8. [Repetition Strain Injury

    PubMed

    Ribeiro

    1997-01-01

    Muscular-skeletal disorders of the upper limbs resulting from work involving repetition strain (RSI) are now the most frequent work-related diseases in early or late industrialized countries. The author maintains that in addition to being work-related diseases, RSIs are symbolic illnesses revealing the contradictions and social pathogenesis of the new cycle of development and crisis in capitalist production. Discussing the social and historical dimensions of this process, the author insists that the low efficacy of technical interventions by labor engineering, ergonomics, and clinical medicine in the prevention, early and adequate diagnosis, and treatment of such post-modern illnesses and the difficulty in rehabilitating and reincorporating such workers reflect precisely a broader determination of health and illness, since the appropriation, incorporation, and use of technological innovations and the new forms of work management are defined according to the exclusive interests of capital. Thus, a growing contingent of young workers (mainly females) from different labor categories are losing or under threat of losing their health and work capacity, two essential and closely linked public values. The solution to the SRI issue must be political and collective. PMID:10886940

  9. High temperature strain measurement with a resistance strain gage

    NASA Technical Reports Server (NTRS)

    Lei, Jih-Fen; Fichtel, ED; Mcdaniel, Amos

    1993-01-01

    A PdCr based electrical resistance strain gage was demonstrated in the laboratory to be a viable sensor candidate for static strain measurement at high temperatures. However, difficulties were encountered while transferring the sensor to field applications. This paper is therefore prepared for recognition and resolution of the problems likely to be encountered with PdCr strain gages in field applications. Errors caused by the measurement system, installation technique and lead wire attachment are discussed. The limitations and some considerations related to the temperature compensation technique used for this gage are also addressed.

  10. Recent advances in echocardiography: strain and strain rate imaging

    PubMed Central

    Mirea, Oana; Duchenne, Jurgen; Voigt, Jens-Uwe

    2016-01-01

    Deformation imaging by echocardiography is a well-established research tool which has been gaining interest from clinical cardiologists since the introduction of speckle tracking. Post-processing of echo images to analyze deformation has become readily available at the fingertips of the user. New parameters such as global longitudinal strain have been shown to provide added diagnostic value, and ongoing efforts of the imaging societies and industry aimed at harmonizing methods will improve the technique further. This review focuses on recent advances in the field of echocardiographic strain and strain rate imaging, and provides an overview on its current and potential future clinical applications. PMID:27158476

  11. Ferroelastic dynamics and strain compatibility

    NASA Astrophysics Data System (ADS)

    Lookman, T.; Shenoy, S. R.; Rasmussen, K. Ø.; Saxena, A.; Bishop, A. R.

    2003-01-01

    We derive underdamped evolution equations for the order-parameter (OP) strains of a proper ferroelastic material undergoing a structural transition, using Lagrangian variations with Rayleigh dissipation, and a free energy as a polynomial expansion in the N=n+Nop symmetry-adapted strains. The Nop strain equations are structurally similar in form to the Lagrange-Rayleigh one-dimensional strain dynamics of Bales and Gooding (BG), with “strain accelerations” proportional to a Laplacian acting on a sum of the free-energy strain derivative and frictional strain force assuming geometric linearity. The tensorial St. Venant’s elastic compatibility constraints that forbid defects, are used to determine the n non-order-parameter strains in terms of the OP strains, generating anisotropic and long-range OP contributions to the free energy, friction, and noise. The same OP equations are obtained by either varying the displacement vector components, or by varying the N strains subject to the Nc compatibility constraints. A Fokker-Planck equation, based on the BG dynamics in more than one dimension with noise terms, is set up. The BG dynamics corresponds to a set of nonidentical nonlinear (strain) oscillators labeled by wave vector k→, with competing short- and long-range couplings. The oscillators have different “strain-mass” densities ρ(k)˜1/k2 and dampings ˜1/ρ(k)˜k2, so the lighter large-k oscillators equilibrate first, corresponding to earlier formation of smaller-scale oriented textures. This produces a sequential-scale scenario for post-quench nucleation, elastic patterning, and hierarchical growth. Neglecting inertial effects yields a late-time dynamics for identifying extremal free-energy states, that is, of the time-dependent Ginzburg-Landau form, with nonlocal, anisotropic Onsager coefficients that become constants for special parameter values. We consider in detail the two-dimensional (2D) unit-cell transitions from a triangular to a centered

  12. Low TCR nanocomposite strain gages

    NASA Technical Reports Server (NTRS)

    Gregory, Otto J. (Inventor); Chen, Ximing (Inventor)

    2012-01-01

    A high temperature thin film strain gage sensor capable of functioning at temperatures above 1400.degree. C. The sensor contains a substrate, a nanocomposite film comprised of an indium tin oxide alloy, zinc oxide doped with alumina or other oxide semiconductor and a refractory metal selected from the group consisting of Pt, Pd, Rh, Ni, W, Ir, NiCrAlY and NiCoCrAlY deposited onto the substrate to form an active strain element. The strain element being responsive to an applied force.

  13. High-temperature capacitive strain measurement system

    NASA Technical Reports Server (NTRS)

    Wilson, E. J.; Egger, R. L.

    1975-01-01

    Capacitive strain gage and signal conditioning system measures stress-induced strain and cancels thermal expansion strain at temperatures to 1,500 F (815 C). Gage does not significantly restrain or reinforce specimen.

  14. Anelastic Strain Recovery Analysis Code

    Energy Science and Technology Software Center (ESTSC)

    1995-04-05

    ASR4 is a nonlinear least-squares regression of Anelastic Strain Recovery (ASR) data for the purpose of determining in situ stress orientations and magnitudes. ASR4 fits the viscoelastic model of Warpinski and Teufel to measure ASR data, calculates the stress orientations directly, and stress magnitudes if sufficient input data are available. The code also calculates the stress orientation using strain-rosette equations, and it calculates stress magnitudes using Blanton''s approach, assuming sufficient input data are available.

  15. Bacterial Strain Diversity Within Wounds

    PubMed Central

    Kirkup, Benjamin C.

    2015-01-01

    Significance: Rare bacterial taxa (taxa of low relative frequency) are numerous and ubiquitous in virtually any sample—including wound samples. In addition, even the high-frequency genera and species contain multiple strains. These strains, individually, are each only a small fraction of the total bacterial population. Against the view that wounds contain relatively few kinds of bacteria, this newly recognized diversity implies a relatively high rate of migration into the wound and the potential for diversification during infection. Understanding the biological and medical importance of these numerous taxa is an important new element of wound microbiology. Recent Advances: Only recently have these numerous strains been discovered; the technology to detect, identify, and characterize them is still in its infancy. Multiple strains of both gram-negative and gram-positive bacteria have been found in a single wound. In the few cases studied, the distribution of the bacteria suggests microhabitats and biological interactions. Critical Issues: The distribution of the strains, their phenotypic diversity, and their interactions are still largely uncharacterized. The technologies to investigate this level of genomic detail are still developing and have not been largely deployed to investigate wounds. Future Directions: As advanced metagenomics, single-cell genomics, and advanced microscopy develop, the study of wound microbiology will better address the complex interplay of numerous individually rare strains with both the host and each other. PMID:25566411

  16. Optical Strain Measurement System Development

    NASA Technical Reports Server (NTRS)

    Lant, C. T.

    1985-01-01

    Investigations of physical phenomena affecting the durability of SSME components require measurement systems operational in hostile environments. The need for such instrumentation caused the definition and operation of an optical strain measurement system. This optical strain measurement system based on the speckle shift method is being developed. This is a noncontact, automatic method of measuring surface strain in one dimension that corrects for error due to rigid body motion. It provides a gauge length of 1 to 2 mm and allows the region of interest on the test specimen to be mapped point by point. The output is a graphics map of the points inspected on the specimen; data points is stored in quasi-real time. This is the first phase of a multiphase effort in optical strain measurement. The speckle pattern created by the test specimen is interpreted as high order interference fringes resulting from a random diffraction grating, being the natural surface roughness of the specimen. Strain induced on the specimen causes a change in spacing of the surface roughness, which in turn shifts the position of the interference pattern (speckles).

  17. Genome Sequence of Pseudomonas chlororaphis Strain 189

    PubMed Central

    Town, Jennifer; Audy, Patrice; Boyetchko, Susan M.

    2016-01-01

    Pseudomonas chlororaphis strain 189 is a potent inhibitor of the growth of the potato pathogen Phytophthora infestans. We determined the complete, finished sequence of the 6.8-Mbp genome of this strain, consisting of a single contiguous molecule. Strain 189 is closely related to previously sequenced strains of P. chlororaphis. PMID:27340063

  18. Measuring mine roof bolt strains

    DOEpatents

    Steblay, Bernard J.

    1986-01-01

    A mine roof bolt and a method of measuring the strain in mine roof bolts of this type are disclosed. According to the method, a flat portion on the head of the mine roof bolt is first machined. Next, a hole is drilled radially through the bolt at a predetermined distance from the bolt head. After installation of the mine roof bolt and loading, the strain of the mine roof bolt is measured by generating an ultrasonic pulse at the flat portion. The time of travel of the ultrasonic pulse reflected from the hole is measured. This time of travel is a function of the distance from the flat portion to the hole and increases as the bolt is loaded. Consequently, the time measurement is correlated to the strain in the bolt. Compensation for various factors affecting the travel time are also provided.

  19. Spin transport in graphene superlattice under strain

    NASA Astrophysics Data System (ADS)

    Sattari, Farhad

    2016-09-01

    In this paper, the spin-dependent transport and the spin polarization properties for graphene superlattice with Rashba spin-orbit interaction (RSOI) in the presence of zigzag and armchair direction strain are studied. It is found that for the zigzag direction strain the angular range of the spin-inversion can be efficiently controlled by the strain strength. In addition, the efficiency of spin-inversion and spin-dependent conductivity decreases by increasing the strain strength. When the armchair direction strain is applied to a monolayer graphene superlattice the spin polarization can be observed and increases by increasing the strain strength, whereas for the zigzag direction strain it is zero.

  20. Taxonomy of oxalotrophic Methylobacterium strains

    NASA Astrophysics Data System (ADS)

    Sahin, Nurettin; Kato, Yuko; Yilmaz, Ferah

    2008-10-01

    Most of the oxalotrophic bacteria are facultative methylotrophs and play important ecological roles in soil fertility and cycling of elements. This study gives a detailed picture of the taxonomy and diversity of these bacteria and provides new information about the taxonomical variability within the genus Methylobacterium. Twelve mesophilic, pink-pigmented, and facultatively methylotrophic oxalate-oxidizing strains were included in this work that had been previously isolated from the soil and some plant tissues by the potassium oxalate enrichment method. The isolates were characterized using biochemical tests, cellular lipid profiles, spectral characteristics of carotenoid pigments, G+C content of the DNA, and 16S rDNA sequencing. The taxonomic similarities among the strains were analyzed using the simple matching ( S SM) and Jaccard ( S J) coefficients, and the UPGMA clustering algorithm. The phylogenetic position of the strains was inferred by the neighbor-joining method on the basis of the 16S rDNA sequences. All isolates were Gram-negative, facultatively methylotrophic, oxidase and catalase positive, and required no growth factors. Based on the results of numerical taxonomy, the strains formed four closely related clusters sharing ≥85% similarity. Analysis of the 16S rDNA sequences demonstrated that oxalotrophic, pink-pigmented, and facultatively methylotrophic strains could be identified as members of the genus Methylobacterium. Except for M. variabile and M. aquaticum, all of the Methylobacterium type strains tested had the ability of oxalate utilization. Our results indicate that the capability of oxalate utilization seems to be an uncommon trait and could be used as a valuable taxonomic criterion for differentiation of Methylobacterium species.

  1. Photoacoustic spectroscopy of Entamoeba histolytica strains

    NASA Astrophysics Data System (ADS)

    Acosta-Avalos, D.; Alvarado-Gil, J. J.; Silva, E. F.; Orozco, E.; de Menezes, L. F.; Vargas, H.

    2005-06-01

    Pathogenic and non-pathogenic strains of E. histolytica are studied using photoacoustic spectroscopy. It is shown that the pathogenic strain presents a spectrum similar to that of iron sulfur proteins. The non-pathogenic strain does not show any relevant absorption at the studied wavelength range. The differences observed between the optical absorption spectra of both strains opens the possibility of using photoacoustic spectroscopy as a reliable and simple technique to identify different types of E. histolytica strains.

  2. Trials with a Strain Gauge.

    ERIC Educational Resources Information Center

    Auty, Geoff

    1996-01-01

    Describes an attempt to match the goals of the practical demonstration of the use of a strain gauge and the technical applications of science and responding to student questions in early trials, while keeping within the level of electronics in advanced physics. (Author/JRH)

  3. Virulence of 32 Salmonella Strains in Mice

    PubMed Central

    Swearingen, Matthew C.; Porwollik, Steffen; Desai, Prerak T.; McClelland, Michael; Ahmer, Brian M. M.

    2012-01-01

    Virulence and persistence in the BALB/c mouse gut was tested for 32 strains of Salmonella enterica for which genome sequencing is complete or underway, including 17 serovars within subspecies I (enterica), and two representatives of each of the other five subspecies. Only serovar Paratyphi C strain BAA1715 and serovar Typhimurium strain 14028 were fully virulent in mice. Three divergent atypical Enteritidis strains were not virulent in BALB/c, but two efficiently persisted. Most of the other strains in all six subspecies persisted in the mouse intestinal tract for several weeks in multiple repeat experiments although the frequency and level of persistence varied considerably. Strains with heavily degraded genomes persisted very poorly, if at all. None of the strains tested provided immunity to Typhimurium infection. These data greatly expand on the known significant strain-to-strain variation in mouse virulence and highlight the need for comparative genomic and phenotypic studies. PMID:22558320

  4. Mapping microscale strain heterogeneity during creep deformation

    NASA Astrophysics Data System (ADS)

    Quintanilla Terminel, A.; Evans, J.

    2013-12-01

    We use a new technique combining microfabrication technology and compression tests to map the strain field at a micrometric scale in polycrystalline materials. This technique allows us to map local strain while measuring macroscopic strain and rheological properties, and provides insight into the relative contribution of various plasticity mechanisms under varying creep conditions. The micro-strain mapping technique was applied to Carrara Marble under different deformation regimes, at 300 MPa and temperatures ranging from 200 to 700 °C. At 600 °C, strain of 10%, and strain rate of 3e-5s-1, the local strain at twin and grain boundaries is up to 5 times greater than the average sample strain. At these conditions, strains averaged across a particular grain may vary by as much as 100%, but the strain field becomes more homogeneous with increasing strain. For example, for the analyzed experiments, the average wavelength of the strain heterogeneity is 70 micrometers at 10% strain, but increases to 110 micrometers at 20%. For a strain of 10%, heterogeneity is increased at slower strain rate (at 1e-5s-1). This increase seems to be associated with a more important role of twin boundary and grain boundary migration. As expected, twin densities are markedly greater at the lower temperature, though it is still unclear whether the relative twin volume is greater. However, twin strains are still important at 600 °C and accommodate an average of 14 % of the total strain at 10% deformation and a strain rate of 3e-5s-1.

  5. Material mechanical characterization method for multiple strains and strain rates

    DOEpatents

    Erdmand, III, Donald L.; Kunc, Vlastimil; Simunovic, Srdjan; Wang, Yanli

    2016-01-19

    A specimen for measuring a material under multiple strains and strain rates. The specimen including a body having first and second ends and a gage region disposed between the first and second ends, wherein the body has a central, longitudinal axis passing through the first and second ends. The gage region includes a first gage section and a second gage section, wherein the first gage section defines a first cross-sectional area that is defined by a first plane that extends through the first gage section and is perpendicular to the central, longitudinal axis. The second gage section defines a second cross-sectional area that is defined by a second plane that extends through the second gage section and is perpendicular to the central, longitudinal axis and wherein the first cross-sectional area is different in size than the second cross-sectional area.

  6. Modelling to very high strains

    NASA Astrophysics Data System (ADS)

    Bons, P. D.; Jessell, M. W.; Griera, A.; Evans, L. A.; Wilson, C. J. L.

    2009-04-01

    Ductile strains in shear zones often reach extreme values, resulting in typical structures, such as winged porphyroclasts and several types of shear bands. The numerical simulation of the development of such structures has so far been inhibited by the low maximum strains that numerical models can normally achieve. Typical numerical models collapse at shear strains in the order of one to three. We have implemented a number of new functionalities in the numerical platform "Elle" (Jessell et al. 2001), which significantly increases the amount of strain that can be achieved and simultaneously reduces boundary effects that become increasingly disturbing at higher strain. Constant remeshing, while maintaining the polygonal phase regions, is the first step to avoid collapse of the finite-element grid required by finite-element solvers, such as Basil (Houseman et al. 2008). The second step is to apply a grain-growth routine to the boundaries of polygons that represent phase regions. This way, the development of sharp angles is avoided. A second advantage is that phase regions may merge or become separated (boudinage). Such topological changes are normally not possible in finite element deformation codes. The third step is the use of wrapping vertical model boundaries, with which optimal and unchanging model boundaries are maintained for the application of stress or velocity boundary conditions. The fourth step is to shift the model by a random amount in the vertical direction every time step. This way, the fixed horizontal boundary conditions are applied to different material points within the model every time step. Disturbing boundary effects are thus averaged out over the whole model and not localised to e.g. top and bottom of the model. Reduction of boundary effects has the additional advantage that model can be smaller and, therefore, numerically more efficient. Owing to the combination of these existing and new functionalities it is now possible to simulate the

  7. Strains

    MedlinePlus

    Pulled muscle ... can include: Pain and difficulty moving the injured muscle Discolored and bruised skin Swelling ... if you still have pain. Rest the pulled muscle for at least a day. If possible, keep ...

  8. Strain tolerant microfilamentary superconducting wire

    DOEpatents

    Finnemore, D.K.; Miller, T.A.; Ostenson, J.E.; Schwartzkopf, L.A.; Sanders, S.C.

    1993-02-23

    A strain tolerant microfilamentary wire capable of carrying superconducting currents is provided comprising a plurality of discontinuous filaments formed from a high temperature superconducting material. The discontinuous filaments have a length at least several orders of magnitude greater than the filament diameter and are sufficiently strong while in an amorphous state to withstand compaction. A normal metal is interposed between and binds the discontinuous filaments to form a normal metal matrix capable of withstanding heat treatment for converting the filaments to a superconducting state. The geometry of the filaments within the normal metal matrix provides substantial filament-to-filament overlap, and the normal metal is sufficiently thin to allow supercurrent transfer between the overlapped discontinuous filaments but is also sufficiently thick to provide strain relief to the filaments.

  9. Computational strain gradient crystal plasticity

    NASA Astrophysics Data System (ADS)

    Niordson, Christian F.; Kysar, Jeffrey W.

    2014-01-01

    A numerical method for viscous strain gradient crystal plasticity theory is presented, which incorporates both energetic and dissipative gradient effects. The underlying minimum principles are discussed as well as convergence properties of the proposed finite element procedure. Three problems of plane crystal plasticity are studied: pure shear of a single crystal between rigid platens as well as plastic deformation around cylindrical voids in hexagonal close packed and face centered cubic crystals. Effective in-plane constitutive slip parameters for plane strain deformation of specifically oriented face centered cubic crystals are developed in terms of the crystallographic slip parameters. The effect on geometrically necessary dislocation structures introduced by plastic deformation is investigated as a function of the ratio of void radius to plasticity length scale.

  10. High Temperature Capacitive Strain Gage

    NASA Technical Reports Server (NTRS)

    Wnuk, Stephen P., Jr.; Wnuk, Stephen P., III; Wnuk, V. P.

    1990-01-01

    Capacitive strain gages designed for measurements in wind tunnels to 2000 F were built and evaluated. Two design approaches were followed. One approach was based on fixed capacitor plates with a movable ground plane inserted between the plates to effect differential capacitive output with strain. The second approach was based on movable capacitor plates suspended between sapphire bearings, housed in a rugged body, and arranged to operate as a differential capacitor. A sapphire bearing gage (1/4 in. diameter x 1 in. in size) was built with a range of 50,000 and a resolution of 200 microstrain. Apparent strain on Rene' 41 was less than + or - 1000 microstrain from room temperature to 2000 F. Three gage models were built from the Ground Plane Differential concept. The first was 1/4 in. square by 1/32 in. high and useable to 700 F. The second was 1/2 in. square by 1/16 in. high and useable to 1440 F. The third, also 1/2 in. square by 1/16 in. high was expected to operate in the 1600 to 2000 F range, but was not tested because time and funding ended.

  11. Strain stiffening in collagen I networks.

    PubMed

    Motte, Stéphanie; Kaufman, Laura J

    2013-01-01

    Biopolymer gels exhibit strain stiffening that is generally not seen in synthetic gels. Here, we investigate the strain-stiffening behavior in collagen I gels that demonstrate elasticity derived from a variety of sources including crosslinking through telopeptides, bundling through low-temperature gelation, and exogenous crosslinking with genipin. In all cases, it is found that these gels exhibit strain stiffening; in general, onset of strain stiffening occurs earlier, yield strain is lower, and degree of strain stiffening is smaller in higher concentration gels and in those displaying thick fibril bundles. Recovery after exposure to high strains is substantial and similar in all gels, suggesting that much of the stiffening comes from reversible network deformations. A key finding of this study is that collagen I gels of identical storage and loss moduli may display different nonlinear responses and different capacities to recover from high strain. PMID:23097228

  12. Design of a strain-gage probe

    NASA Technical Reports Server (NTRS)

    Kolba, V. M.; Vetter, D. L.

    1969-01-01

    Strain-gage spacer probe uses the deflection of a leaf spring to measure strain in a long, slender beam nondestructively. The selected gage is of the smallest practical size, as thin as possible and yet of a standard type.

  13. Turbulent Plane Wakes Subjected to Successive Strains

    NASA Technical Reports Server (NTRS)

    Rogers, Michael M.

    2003-01-01

    Six direct numerical simulations of turbulent time-evolving strained plane wakes have been examined to investigate the response of a wake to successive irrotational plane strains of opposite sign. The orientation of the applied strain field has been selected so that the flow is the time-developing analogue of a spatially developing wake evolving in the presence of either a favourable or an adverse streamwise pressure gradient. The magnitude of the applied strain rate a is constant in time t until the total strain e(sup at) reaches about four. At this point, a new simulation is begun with the sign of the applied strain being reversed (the original simulation is continued as well). When the total strain is reduced back to its original value of one, yet another simulation is begun with the sign of the strain being reversed again back to its original sign. This process is done for both initially "favourable" and initially "adverse" strains, providing simulations for each of these strain types from three different initial conditions. The evolution of the wake mean velocity deficit and width is found to be very similar for all the adversely strained cases, with both measures rapidly achieving exponential growth at the rate associated with the cross-stream expansive strain e(sup at). In the "favourably" strained cases, the wake widths approach a constant and the velocity deficits ultimately decay rapidly as e(sup -2at). Although all three of these cases do exhibit the same asymptotic exponential behaviour, the time required to achieve this is longer for the cases that have been previously adversely strained (by at approx. equals 1). These simulations confirm the generality of the conclusions drawn in Rogers (2002) regarding the response of plane wakes to strain. The evolution of strained wakes is not consistent with the predictions of classical self-similar analysis; a more general equilibrium similarity solution is required to describe the results. At least for the cases

  14. Piezoelectric field in strained GaAs.

    SciTech Connect

    Chow, Weng Wah; Wieczorek, Sebastian Maciej

    2005-11-01

    This report describes an investigation of the piezoelectric field in strained bulk GaAs. The bound charge distribution is calculated and suitable electrode configurations are proposed for (1) uniaxial and (2) biaxial strain. The screening of the piezoelectric field is studied for different impurity concentrations and sample lengths. Electric current due to the piezoelectric field is calculated for the cases of (1) fixed strain and (2) strain varying in time at a constant rate.

  15. Temperature-Compensating Inactive Strain Gauge

    NASA Technical Reports Server (NTRS)

    Moore, Thomas C., Sr.

    1993-01-01

    Thermal contribution to output of active gauge canceled. High-temperature strain gauges include both active gauge wires sensing strains and inactive gauge wires providing compensation for thermal contributions to gauge readings. Inactive-gauge approach to temperature compensation applicable to commercially available resistance-type strain gauges operating at temperatures up to 700 degrees F and to developmental strain gauges operating at temperatures up to 2,000 degrees F.

  16. Installing strain gauges on composite material

    NASA Astrophysics Data System (ADS)

    Shull, Larry

    The evolution of the strain gage is traced and problems associated with their use on composite materials are discussed. It is believed that the use of the computer in strain gage data systems has caused some of the attitude problems in measuring strains in composite materials. The performance of strain gages on filament-wound Kevlar pressure vessels is discussed as well as graphite composites during 1984-1986, surface preparation, gage location alignment.

  17. Strain Monitoring of Flexible Structures

    NASA Technical Reports Server (NTRS)

    Litteken, Douglas A.

    2017-01-01

    , such as tensile testing, fatigue testing, and shear testing, but common measurement techniques cannot be used on fabric. Measuring strain in a material and during a test is a critical parameter for an engineer to monitor the structure during the test and correlate to an analytical model. The ability to measure strain in fabric structures is a challenge for NASA. Foil strain gauges, for example, are commonplace on metallic structures testing, but are extremely difficult to interface with a fabric substrate. New strain measuring techniques need to be developed for use with fabric structures. This paper investigates options for measuring strain in fabric structures for both ground testing and in-space structural health monitoring. It evaluates current commercially available options and outlines development work underway to build custom measurement solutions for NASA's fabric structures.

  18. Haemophilus ducreyi Cutaneous Ulcer Strains Are Nearly Identical to Class I Genital Ulcer Strains

    PubMed Central

    Gangaiah, Dharanesh; Webb, Kristen M.; Humphreys, Tricia L.; Fortney, Kate R.; Toh, Evelyn; Tai, Albert; Katz, Samantha S.; Pillay, Allan; Chen, Cheng-Yen; Roberts, Sally A.; Munson, Robert S.; Spinola, Stanley M.

    2015-01-01

    Background Although cutaneous ulcers (CU) in the tropics is frequently attributed to Treponema pallidum subspecies pertenue, the causative agent of yaws, Haemophilus ducreyi has emerged as a major cause of CU in yaws-endemic regions of the South Pacific islands and Africa. H. ducreyi is generally susceptible to macrolides, but CU strains persist after mass drug administration of azithromycin for yaws or trachoma. H. ducreyi also causes genital ulcers (GU) and was thought to be exclusively transmitted by microabrasions that occur during sex. In human volunteers, the GU strain 35000HP does not infect intact skin; wounds are required to initiate infection. These data led to several questions: Are CU strains a new variant of H. ducreyi or did they evolve from GU strains? Do CU strains contain additional genes that could allow them to infect intact skin? Are CU strains susceptible to azithromycin? Methodology/Principal Findings To address these questions, we performed whole-genome sequencing and antibiotic susceptibility testing of 5 CU strains obtained from Samoa and Vanuatu and 9 archived class I and class II GU strains. Except for single nucleotide polymorphisms, the CU strains were genetically almost identical to the class I strain 35000HP and had no additional genetic content. Phylogenetic analysis showed that class I and class II strains formed two separate clusters and CU strains evolved from class I strains. Class I strains diverged from class II strains ~1.95 million years ago (mya) and CU strains diverged from the class I strain 35000HP ~0.18 mya. CU and GU strains evolved under similar selection pressures. Like 35000HP, the CU strains were highly susceptible to antibiotics, including azithromycin. Conclusions/Significance These data suggest that CU strains are derivatives of class I strains that were not recognized until recently. These findings require confirmation by analysis of CU strains from other regions. PMID:26147869

  19. Modal strain energies in COSMIC NASTRAN

    NASA Technical Reports Server (NTRS)

    Snyder, B. D.; Venkayya, V. B.

    1989-01-01

    A computer program was developed to take a NASTRAN output file from a normal modes analysis and calculate the modal strain energies of selected elements. The FORTRAN program can determine the modal strain energies for CROD, CBAR, CELAS, CTRMEM, CQDMEM2, and CSHEAR elements. Modal strain energies are useful in estimating damping in structures.

  20. Strains and Sprains Are a Pain

    MedlinePlus

    ... move the injured part, and you may even think you have broken a bone . How Does a Strain or Sprain Happen? Strains often happen when you put a lot of pressure on a muscle or you push it too far, such as when lifting a heavy object. Strains can be more likely to happen if ...

  1. Strainrange partitioning: A total strain range version

    NASA Technical Reports Server (NTRS)

    Halford, G. R.; Saltsman, J. F.

    1983-01-01

    Procedures are presented for expressing the Strainrange Partitioning (SRP) method for creep fatigue life prediction in terms of total strain range. Inelastic and elastic strain-range - life relations are summed to give total strain-range - life relations. The life components due to inelastic strains are dealt with using conventional SRP procedures while the life components due to elastic strains are expressed as families of time-dependent terms for each type of SRP cycle. Cyclic constitutive material behavior plays an important role in establishing the elastic strain-range - life relations as well as the partitioning of the inelastic strains. To apply the approach, however, it is not necessary to have to determine the magnitude of the inelastic strain range. The total strain SRP approach is evaluated and verified using two nickel base superalloys, AF2-1DA and Rene 95. Excellent agreement is demonstrated between observed and predicted cyclic lifetimes with 70 to 80 percent of the predicted lives falling within factors of two of the observed lives. The total strain-range SRP approach should be of considerable practical value to designers who are faced with creep-fatigue problems for which the inelastic strains cannot be calculated with sufficient accuracy to make reliable life predictions by the conventional inelastic strain range SRP approach.

  2. Siderotyping of Antarctic fluorescent Pseudomonas strains.

    PubMed

    Geoffroy, V A; Meyer, J M

    2004-07-01

    Five fluorescent Pseudomonas strains isolated from Antarctica have been previously recognized as producing three structurally different pyoverdines. In the present work, siderotyping procedures have been used to classify these strains, together with 1282 isolates of different origins, into siderovars. The strain biodiversity encountered within each siderovar, as well as the potential taxonomic value of the siderovars, are described and discussed. It is concluded that a majority of antarctic strains are commonly distributed worldwide. One strain, however, presenting a particular pyoverdine structure found in a unique other isolate, was apparently much more specific to cold environment. PMID:15559975

  3. Progress in optical strain measurement system development

    NASA Technical Reports Server (NTRS)

    Lant, Christian T.; Qaqish, Walid

    1987-01-01

    A laser speckle strain measurement system has been built and tested for the NASA Lewis Research Center. The system is based on a speckle shift technique, which automatically corrects for error due to rigid body motion, and provides a near real time measure of strain. The first stage of a multiphase effort to develop an optical strain gauge capable of mapping in two dimensions the strain on the surface of a hot specimen is discussed. The objectives of this first phase have been to provide a noncontact, one-dimensional, differential strain gauge for experimental purposes, and to determine the maximum open air temperature limit of the system.

  4. Strain Engineering of Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Dadgar, Ali; Pasupathy, Abhay; Herman, Irving; Wang, Dennis; Kang, Kyungnam; Yang, Eui-Hyeok

    The application of strain to materials can cause changes to bandwidth, effective masses, degeneracies and even structural phases. In the case of the transition metal dichalcogenide (TMD) semiconductors, small strain (around 1 percent) is expected to change band gaps and mobilities, while larger strains are expected to cause phase changes from the triangular 2H phase to orthorhombic 1T' phases. We will describe experimental techniques to apply small and large (around 10 percent) strains to one or few layer samples of the TMD semiconductors, and describe the effect of the strain using optical (Raman, photoluminescence) and cryogenic transport techniques.

  5. Demonstration test of burner liner strain measurements using resistance strain gages

    NASA Technical Reports Server (NTRS)

    Grant, H. P.; Anderson, W. L.

    1984-01-01

    A demonstration test of burner liner strain measurements using resistance strain gages as well as a feasibility test of an optical speckle technique for strain measurement are presented. The strain gage results are reported. Ten Kanthal A-1 wire strain gages were used for low cycle fatigue strain measurements to 950 K and .002 apparent strain on a JT12D burner can in a high pressure (10 atmospheres) burner test. The procedure for use of the strain gages involved extensive precalibration and postcalibration to correct for cooling rate dependence, drift, and temperature effects. Results were repeatable within + or - .0002 to .0006 strain, with best results during fast decels from 950 K. The results agreed with analytical prediction based on an axisymmetric burner model, and results indicated a non-uniform circumferential distribution of axial strain, suggesting temperature streaking.

  6. Strain flexibility identification of bridges from long-gauge strain measurements

    NASA Astrophysics Data System (ADS)

    Zhang, Jian; Xia, Qi; Cheng, YuYao; Wu, ZhiShen

    2015-10-01

    Strain flexibility, defined as the strain response of a structure's element to a unit input force, is import for structural safety evaluation, but its identification is seldom investigated. A novel long-gauge fiber optic sensor has been developed to measure the averaged strain within a long gauge length. Its advantage of measuring both local and global information of the structure offers an excellent opportunity of developing the strain flexibility identification theory. In this article, the method to identify structural strain flexibility from long-gauge dynamic strain measurements is proposed. It includes the following main steps: (a) macro strain frequency response function (FRF) estimation from macro strain measurements and its feature characterization; (b) general strain modal parameter identification; (c) scaling factor calculation, and (d) strain flexibility identification. Numerical and experimental examples successfully verify the effectiveness of the proposed method.

  7. Job Strain in Physical Therapists

    PubMed Central

    Campo, Marc A.; Weiser, Sherri; Koenig, Karen L.

    2009-01-01

    Background: Job stress has been associated with poor outcomes. In focus groups and small-sample surveys, physical therapists have reported high levels of job stress. Studies of job stress in physical therapy with larger samples are needed. Objective: The purposes of this study were: (1) to determine the levels of psychological job demands and job control reported by physical therapists in a national sample, (2) to compare those levels with national norms, and (3) to determine whether high demands, low control, or a combination of both (job strain) increases the risk for turnover or work-related pain. Design: This was a prospective cohort study with a 1-year follow-up period. Methods: Participants were randomly selected members of the American Physical Therapy Association (n=882). Exposure assessments included the Job Content Questionnaire (JCQ), a commonly used instrument for evaluation of the psychosocial work environment. Outcomes included job turnover and work-related musculoskeletal disorders. Results: Compared with national averages, the physical therapists reported moderate job demands and high levels of job control. About 16% of the therapists reported changing jobs during follow-up. Risk factors for turnover included high job demands, low job control, job strain, female sex, and younger age. More than one half of the therapists reported work-related pain. Risk factors for work-related pain included low job control and job strain. Limitations: The JCQ measures only limited dimensions of the psychosocial work environment. All data were self-reported and subject to associated bias. Conclusions: Physical therapists’ views of their work environments were positive, including moderate levels of demands and high levels of control. Those therapists with high levels of demands and low levels of control, however, were at increased risk for both turnover and work-related pain. Physical therapists should consider the psychosocial work environment, along with other

  8. Straining Graphene Using Thin Film Shrinkage Methods

    PubMed Central

    2014-01-01

    Theoretical works suggest the possibility and usefulness of strain engineering of graphene by predicting remarkable properties, such as Dirac cone merging, bandgap opening and pseudo magnetic field generation. However, most of these predictions have not yet been confirmed because it is experimentally difficult to control the magnitude and type (e.g., uniaxial, biaxial, and so forth) of strain in graphene devices. Here we report two novel methods to apply strain without bending the substrate. We employ thin films of evaporated metal and organic insulator deposited on graphene, which shrink after electron beam irradiation or heat application. These methods make it possible to apply both biaxial strain and in-plane isotropic compressive strain in a well-controlled manner. Raman spectroscopy measurements show a clear splitting of the degenerate states of the G-band in the case of biaxial strain, and G-band blue shift without splitting in the case of in-plane isotropic compressive strain. In the case of biaxial strain application, we find out the ratio of the strain component perpendicular to the stretching direction is at least three times larger than what was previously observed, indicating that shrinkage of the metal or organic insulator deposited on graphene induces both tensile and compressive strain in this atomically thin material. Our studies present for the first time a viable way to apply strain to graphene without the need to bend the substrate. PMID:24490629

  9. Straining graphene using thin film shrinkage methods.

    PubMed

    Shioya, Hiroki; Craciun, Monica F; Russo, Saverio; Yamamoto, Michihisa; Tarucha, Seigo

    2014-03-12

    Theoretical works suggest the possibility and usefulness of strain engineering of graphene by predicting remarkable properties, such as Dirac cone merging, bandgap opening and pseudo magnetic field generation. However, most of these predictions have not yet been confirmed because it is experimentally difficult to control the magnitude and type (e.g., uniaxial, biaxial, and so forth) of strain in graphene devices. Here we report two novel methods to apply strain without bending the substrate. We employ thin films of evaporated metal and organic insulator deposited on graphene, which shrink after electron beam irradiation or heat application. These methods make it possible to apply both biaxial strain and in-plane isotropic compressive strain in a well-controlled manner. Raman spectroscopy measurements show a clear splitting of the degenerate states of the G-band in the case of biaxial strain, and G-band blue shift without splitting in the case of in-plane isotropic compressive strain. In the case of biaxial strain application, we find out the ratio of the strain component perpendicular to the stretching direction is at least three times larger than what was previously observed, indicating that shrinkage of the metal or organic insulator deposited on graphene induces both tensile and compressive strain in this atomically thin material. Our studies present for the first time a viable way to apply strain to graphene without the need to bend the substrate. PMID:24490629

  10. Numerical demonstration of MEMS strain sensor

    NASA Astrophysics Data System (ADS)

    Saboonchi, Hossain; Ozevin, Didem

    2012-04-01

    Silicon has piezoresistive property that allows designing strain sensor with higher gauge factor compared to conventional metal foil gauges. The sensing element can be micro-scale using MEMS, which minimizes the effect of strain gradient on measurement at stress concentration regions such as crack tips. The challenge of MEMS based strain sensor design is to decouple the sensing element from substrate for true strain measurement and to compensate the temperature effect on the piezoresistive coefficients of silicon. In this paper, a family of MEMS strain sensors with different geometric designs is introduced. Each strain sensor is made of single crystal silicon and manufactured using deposition/ etching/oxidation steps on a n- doped silicon wafer in (100) plane. The geometries include sensing element connected to the free heads of U shape substrate, a set of two or more sensing elements in an array in order to capture strain gradients and two directional sensors. The response function and the gauge factor of the strain sensors are identified using multi-physics models that combine structural and electrical behaviors of sensors mounted on a strained structure. The relationship between surface strain and strain at microstructure is identified numerically in order to include the relationship in the response function calculation.

  11. Thick film wireless and powerless strain sensor

    NASA Astrophysics Data System (ADS)

    Jia, Yi; Sun, Ke

    2006-03-01

    The development of an innovative wireless strain sensing technology has a great potential to extend its applications in manufacturing, civil engineering and aerospace industry. This paper presents a novel wireless and powerless strain sensor with a multi-layer thick film structure. The sensor employs a planar inductor (L) and capacitive transducer (C) resonant tank sensing circuit, and a strain sensitive material of a polarized polyvinylidene fluoride (PVDF) piezoelectric thick film to realize the wireless strain sensing by strain to frequency conversion and to receive radio frequency electromagnetic energy for powering the sensor. The prototype sensor was designed and fabricated. The results of calibration on a strain constant cantilever beam show a great linearity and sensitivity about 0.0013 in a strain range of 0-0.018.

  12. Strain engineering of graphene: a review

    NASA Astrophysics Data System (ADS)

    Si, Chen; Sun, Zhimei; Liu, Feng

    2016-02-01

    Graphene has intrigued the science community by many unique properties not found in conventional materials. In particular, it is the strongest two-dimensional material ever measured, being able to sustain reversible tensile elastic strain larger than 20%, which yields an interesting possibility to tune the properties of graphene by strain and thus opens a new field called ``straintronics''. In this article, the current progress in the strain engineering of graphene is reviewed. We first summarize the strain effects on the electronic structure and Raman spectra of graphene. We then highlight the electron-phonon coupling greatly enhanced by the biaxial strain and the strong pseudomagnetic field induced by the non-uniform strain with specific distribution. Finally, the potential application of strain-engineering in the self-assembly of foreign atoms on the graphene surface is also discussed. Given the short history of graphene straintronics research, the current progress has been notable, and many further advances in this field are expected.

  13. Differential receptor usage by measles virus strains.

    PubMed

    Bartz, R; Firsching, R; Rima, B; ter Meulen, V; Schneider-Schaulies, J

    1998-05-01

    Recently, we demonstrated that infection of cells with all measles virus (MV) strains tested was inhibited by antibodies against CD46, although not all strains caused downregulation of the MV receptor CD46 from the surface of human cells. We now show that infection of cells with MV strain WTFb, a variant of wild-type isolate WTF which has been isolated and propagated on human BJAB cells, is not inhibited by antibodies against CD46. In contrast, infection of cells with the closely related strain WTFv, a Vero cell-adapted variant of WTF, is inhibited by antibodies against CD46. This observation led us to investigate the interaction of these viruses and the vaccine strain Edmonston (Edm) with CD46 and target cells. Cellular receptors with high affinity binding for WTFb are present on BJAB cells, but not on transfected CD46-expressing CHO cells. In contrast to the Edm strain, virus particles and solubilized envelope glycoproteins of WTFb have a very limited binding capacity to CD46. Furthermore, we show that recombinant soluble CD46 either does not bind, or binds very weakly, to WTFb glycoproteins expressed on the cell surface. Our findings indicate that wild-type MV strain WTFb and vaccine strain Edm use different binding sites on human cells. In addition, the results suggest that MV strains may alternatively use CD46 and an unknown molecule as receptors, and that the degree of usage of both receptors may be MV strain-specific. PMID:9603316

  14. Comparison of Strain Rosettes and Digital Image Correlation for Measuring Vertebral Body Strain.

    PubMed

    Gustafson, Hannah; Siegmund, Gunter; Cripton, Peter

    2016-05-01

    Strain gages are commonly used to measure bone strain, but only provide strain at a single location. Digital image correlation (DIC) is an optical technique that provides the displacement, and therefore strain, over an entire region of interest on the bone surface. This study compares vertebral body strains measured using strain gages and DIC. The anterior surfaces of 15 cadaveric porcine vertebrae were prepared with a strain rosette and a speckled paint pattern for DIC. The vertebrae were loaded in compression with a materials testing machine, and two high-resolution cameras were used to image the anterior surface of the bones. The mean noise levels for the strain rosette and DIC were 1 με and 24 με, respectively. Bland-Altman analysis was used to compare strain from the DIC and rosette (excluding 44% of trials with some evidence of strain rosette failure or debonding); the mean difference ± 2 standard deviations (SDs) was -108 με ± 702 με for the minimum (compressive) principal strain and -53 με ± 332 με for the maximum (tensile) principal strain. Although the DIC has higher noise, it avoids the relatively high risk we observed of strain gage debonding. These results can be used to develop guidelines for selecting a method to measure strain on bone. PMID:26902321

  15. Fiber-optic polarimetric strain gauge

    NASA Astrophysics Data System (ADS)

    Bock, Wojtek J.; Wolinski, Tomasz R.

    A prototype fiber-optic polarimetric strain gauge based on the polarization mode coupling that occurs in highly birefringent optical fibers under the influence of axial strain is presented. Measurement set-up for a bonded strain gauge and its metrological characteristics are discussed together with the interpretation of observed physical effects in terms of changes in beat-length parameter under axial strain. The device is far more sensitive than conventional strain gauges, and can also be readily adjusted to a specified range of strain through an appropriate choice of fiber length and optical signal wavelength. The temperature drift of the device can be compensated in a straightforward procedure. The device is immune to electromagnetic interference, and is intrinsically safe in electrically dangerous, hazardous or explosive environments. Another attraction of this technology is its direct compatibility with fiber-optic telemetry, optical data transmission systems and multiplexing / demultiplexing technology.

  16. Sensor for Measuring Strain in Textile

    PubMed Central

    Mattmann, Corinne; Clemens, Frank; Tröster, Gerhard

    2008-01-01

    In this paper a stain sensor to measure large strain (80%) in textiles is presented. It consists of a mixture of 50wt-% thermoplastic elastomer (TPE) and 50wt-% carbon black particles and is fiber-shaped with a diameter of 0.315mm. The attachment of the sensor to the textile is realized using a silicone film. This sensor configuration was characterized using a strain tester and measuring the resistance (extension-retraction cycles): It showed a linear resistance response to strain, a small hysteresis, no ageing effects and a small dependance on the strain velocity. The total mean error caused by all these effects was ±5.5% in strain. Washing several times in a conventional washing machine did not influence the sensor properties. The paper finishes by showing an example application where 21 strain sensors were integrated into a catsuit. With this garment, 27 upper body postures could be recognized with an accuracy of 97%.

  17. Determining Micromechanical Strain in Nitinol

    SciTech Connect

    Strasberg, Matthew; /SLAC

    2006-09-27

    Nitinol is a superelastic alloy made of equal parts nickel and titanium. Due to its unique shape memory properties, nitinol is used to make medical stents, lifesaving devices used to allow blood flow in occluded arteries. Micromechanical models and even nitinol-specific finite element analysis (FEA) software are insufficient for unerringly predicting fatigue and resultant failure. Due to the sensitive nature of its application, a better understanding of nitinol on a granular scale is being pursued through X-ray diffraction techniques at the Stanford Synchrotron Radiation Laboratory (SSRL) at the Stanford Linear Accelerator Center (SLAC). Through analysis of powder diffraction patterns of nitinol under increasing tensile loads, localized strain can be calculated. We compare these results with micromechanical predictions in order to advance nitinol-relevant FEA tools. From this we hope to gain a greater understanding of how nitinol fatigues under multi-axial loads.

  18. Modeling competition between yeast strains

    NASA Astrophysics Data System (ADS)

    de Gee, Maarten; van Mourik, Hilda; de Visser, Arjan; Molenaar, Jaap

    2016-04-01

    We investigate toxin interference competition between S. cerevisiae colonies grown on a solid medium. In vivo experiments show that the outcome of this competition depends strongly on nutrient availability and cell densities. Here we present a new model for S. cerevisiae colonies, calculating the local height and composition of the colonies. The model simulates yeast colonies that show a good fit to experimental data. Simulations of colonies that start out with a homogeneous mixture of toxin producing and toxin sensitive cells can display remarkable pattern formation, depending on the initial ratio of the strains. Simulations in which the toxin producing and toxin sensitive species start at nearby positions clearly show that toxin production is advantageous.

  19. An experimental evaluation of apparent strain from foil strain gauges attached to carbon composite substrates

    NASA Technical Reports Server (NTRS)

    Scott, B. R.; Lanius, S. J.; Auer, C. W.

    1987-01-01

    An experimental evaluation of apparent thermal strains is conducted using various combinations of substrate/gauge/attachment structure and redundant high temperature extensometry. It is found that the extensometry could either confirm independent measurements of the substrate's thermal expansion, or quantify nonzero mechanical strains resulting from uncertain material behavior and boundary conditions. Apparent strain and thermal expansion behavior data can then be used to modify the raw strain measurements in order to determine either stress producing or total strains. Limitation of the correction procedure for the three selected strain gauges is noted which is due to relatively large gauge/attachment variability.

  20. Mechanical strain and degradation of laser heterostructures

    NASA Astrophysics Data System (ADS)

    Ptashchenko, Alexander A.; Ptashchenko, Fedor A.; Maslejeva, Natalia V.; Sadova, Galina V.

    2001-02-01

    The effect of mechanical strain on degradation processes in GaAs-AlGaAs laser heterostructures (LHS) with stripe geometry and in light emitting diodes (LED) was experimentally studied. The strain was produced either by axial pressure or by indentation with a Wickers pyramid. We show that degradation affects the degree of polarization and the far-field distribution of laser emission. The effect of strain on the degradation intensity is estimated.

  1. Polyphasic characterization of xanthomonas strains from onion.

    PubMed

    Gent, David H; Schwartz, Howard F; Ishimaru, Carol A; Louws, Frank J; Cramer, Robert A; Lawrence, Christopher B

    2004-02-01

    ABSTRACT Xanthomonas leaf blight has become an increasingly important disease of onion, but the diversity among Xanthomonas strains isolated from onion is unknown, as is their relationship to other species and pathovars of Xanthomonas. Forty-nine Xanthomonas strains isolated from onion over 27 years from 10 diverse geographic regions were characterized by pathogenicity to onion and dry bean, fatty acid profiles, substrate utilization patterns (Biolog), bactericide resistance, repetitive sequence-based polymerase chain reaction fingerprinting, rDNA internally transcribed spacer (ITS) region, and hrp b6 gene sequencing. Multiplication of onion Xanthomonas strain R-O177 was not different from X. axonopodis pv. phaseoli in dry bean, but typical common bacterial blight disease symptoms were absent in dry bean. Populations from each geographical region were uniformly sensitive to 100 mug of CuSO(4), 100 mug of ZnSO(4), and 100 mug of streptomycin sulfate per ml. Biolog substrate utilization and fatty acid profiles revealed close phenoltypic relatedness between onion strains of Xanthomonas and X. axonopodis pv. dieffenbachiae (57% of strains) and X. arboricola pv. poinsettiicola (37% of strains), respectively. A logistic regression model based on fatty acid composition and substrate utilization classified 69% of strains into their geographical region of origin. Sequencing of a portion of the hrp B6 gene from 24 strains and ITS region from 25 strains revealed greater than 97% sequence similarity among strains. DNA fingerprinting revealed five genotype groups within onion strains of Xanthomonas and a high degree of genetic diversity among geographical regions of origin. Based on pathogenicity to onion, carbon substrate utilization, fatty acid profiles, rDNA genetic diversity, and genomic fingerprints, we conclude that the strains examined in this study are pathovar X. axonopodis pv. allii. Implications of genetic and phenotypic diversity within X. axonopodis pv. allii are

  2. AN ORGANOTYPIC UNIAXIAL STRAIN MODEL USING MICROFLUIDICS

    PubMed Central

    Dollé, Jean-Pierre; Morrison, Barclay; Schloss, Rene R.; Yarmush, Martin L.

    2012-01-01

    Traumatic brain injuries are the leading cause of disability each year in the US. The most common and devastating consequence is the stretching of axons caused by shear deformation that occurs during rotational acceleration of the brain during injury. The injury effects on axonal molecular and functional events are not fully characterized. We have developed a strain injury model that maintains the three dimensional cell architecture and neuronal networks found in vivo with the ability to visualize individual axons and their response to a mechanical injury. The advantage of this model is that it can apply uniaxial strains to axons that make functional connections between two organotypic slices and injury responses can be observed in real-time and over long term. This uniaxial strain model was designed to be capable of applying an array of mechanical strains at various rates of strain, thus replicating a range of modes of axonal injury. Long term culture, preservation of slice and cell orientation, and slice-slice connection on the device was demonstrated. The device has the ability to strain either individual axons or bundles of axons through the control of microchannel dimensions. The fidelity of the model was verified by observing characteristic responses to various strain injuries which included axonal beading, delayed elastic effects and breakdown in microtubules. Microtubule breakdown was shown to be dependent on the degree of the applied strain field, where maximal breakdown was observed at peak strain and minimal breakdown is observed at low strain. This strain injury model could be a powerful tool in assessing strain injury effects on functional axonal connections. PMID:23233120

  3. Investigation of a noncontact strain measurement technique

    SciTech Connect

    Damiano, B.; Talarico, L.J.

    1996-05-01

    The goal of this project was to investigate the feasibility of a new noncontact technique for directly and continuously monitoring peak strain in rotating components. The technique utilizes the unique strain-sensitive magnetic material properties of transformation Induced Plasticity (TRIP) steel alloys to measure strain. These alloys are weakly magnetic when unstrained but become strongly ferromagnetic after mechanical deformation. A computer study was performed to determine whether the strain-induced change in the magnetic material properties of a TRIP steel gage bonded to a rotating component would cause significant perturbations in the magnetic flux of a stationary electromagnet. The effects of strain level, distance between the rotating component and the stationary electromagnet, and motion-induced eddy currents on flux perturbation magnitude were investigated. The calculated results indicate that a TRIP steel strain sensing element can cause a significant perturbation in the magnetic flux of a stationary electromagnet. The magnetic flux perturbation magnitude was found to be inversely proportional to the distance between the magnet face and the TRIP steel element and directly proportional to the TRIP steel strain level. The effect of motion-induced eddy currents on the magnetic flux was found to be negligible. It appears that the technique can be successfully applied to measure peak strain in rotating components; however, the sensitivity of the magnetic flux perturbation magnitude to the distance between the strain sensing element and the electromagnet may require making an independent proximity measurement.

  4. Measurement of Sorption-Induced Strain

    SciTech Connect

    Eric P. Robertson; Richard L. Christiansen

    2005-05-01

    Strain caused by the adsorption of gases was measured in samples of subbituminous coal from the Powder River basin of Wyoming, U.S.A. and high-volatile bituminous coal from east-central Utah, U.S.A. using an apparatus developed jointly at the Idaho National Laboratory (Idaho Falls, Idaho, U.S.A.) and Colorado School of Mines (Golden, Colorado, U.S.A.). The apparatus can be used to measure strain on multiple small coal samples based on the optical detection of the longitudinal strain instead of the more common usage of strain gauges, which require larger samples and longer equilibration times. With this apparatus, we showed that the swelling and shrinkage processes were reversible and that accurate strain data could be obtained in a shortened amount of time. A suite of strain curves was generated for these coals using gases that included carbon dioxide, nitrogen, methane, helium, and various mixtures of these gases. A Langmuir-type equation was applied to satisfactorily model the strain data obtained for pure gases. The sorption-induced strain measured in the subbituminous coal was larger than the high-volatile bituminous coal for all gases tested over the range of pressures used in the experimentation, with the CO2-induced strain for the subbituminous coal over twice as great at the bituminous coal.

  5. Lattice Strain Due to an Atomic Vacancy

    PubMed Central

    Li, Shidong; Sellers, Michael S.; Basaran, Cemal; Schultz, Andrew J.; Kofke, David A.

    2009-01-01

    Volumetric strain can be divided into two parts: strain due to bond distance change and strain due to vacancy sources and sinks. In this paper, efforts are focused on studying the atomic lattice strain due to a vacancy in an FCC metal lattice with molecular dynamics simulation (MDS). The result has been compared with that from a continuum mechanics method. It is shown that using a continuum mechanics approach yields constitutive results similar to the ones obtained based purely on molecular dynamics considerations. PMID:19582230

  6. High strain rate damage of Carrara marble

    NASA Astrophysics Data System (ADS)

    Doan, Mai-Linh; Billi, Andrea

    2011-10-01

    Several cases of rock pulverization have been observed along major active faults in granite and other crystalline rocks. They have been interpreted as due to coseismic pervasive microfracturing. In contrast, little is known about pulverization in carbonates. With the aim of understanding carbonate pulverization, we investigate the high strain rate (c. 100 s-1) behavior of unconfined Carrara marble through a set of experiments with a Split Hopkinson Pressure Bar. Three final states were observed: (1) at low strain, the sample is kept intact, without apparent macrofractures; (2) failure is localized along a few fractures once stress is larger than 100 MPa, corresponding to a strain of 0.65%; (3) above 1.3% strain, the sample is pulverized. Contrary to granite, the transition to pulverization is controlled by strain rather than strain rate. Yet, at low strain rate, a sample from the same marble displayed only a few fractures. This suggests that the experiments were done above the strain rate transition to pulverization. Marble seems easier to pulverize than granite. This creates a paradox: finely pulverized rocks should be prevalent along any high strain zone near faults through carbonates, but this is not what is observed. A few alternatives are proposed to solve this paradox.

  7. Optical fiber sensor technique for strain measurement

    DOEpatents

    Butler, Michael A.; Ginley, David S.

    1989-01-01

    Laser light from a common source is split and conveyed through two similar optical fibers and emitted at their respective ends to form an interference pattern, one of the optical fibers having a portion thereof subjected to a strain. Changes in the strain cause changes in the optical path length of the strain fiber, and generate corresponding changes in the interference pattern. The interference pattern is received and transduced into signals representative of fringe shifts corresponding to changes in the strain experienced by the strained one of the optical fibers. These signals are then processed to evaluate strain as a function of time, typical examples of the application of the apparatus including electrodeposition of a metallic film on a conductive surface provided on the outside of the optical fiber being strained, so that strains generated in the optical fiber during the course of the electrodeposition are measurable as a function of time. In one aspect of the invention, signals relating to the fringe shift are stored for subsequent processing and analysis, whereas in another aspect of the invention the signals are processed for real-time display of the strain changes under study.

  8. Diversity among Streptomyces Strains Causing Potato Scab

    PubMed Central

    Doering-Saad, Christiane; Kämpfer, Peter; Manulis, Shulamit; Kritzman, Giora; Schneider, Jörg; Zakrzewska-Czerwinska, Jolanta; Schrempf, Hildgund; Barash, Isaac

    1992-01-01

    Eighty Streptomyces isolates, including 35 potato scab-inducing strains and 12 reference strains of Streptomyces scabies, were physiologically characterized by a total of 329 miniaturized tests. Overall similarities of all strains were determined by numerical taxonomy, with the unweighted average linkage (UPGMA) algorithm and simple matching (Ssm) and Jaccard (Sj) coefficients used as measures for similarity. Three cluster groups (A to C) were defined at a similarity level of 80.1% (Ssm); these groups contained 14 clusters and 24 unclustered strains defined at a similarity level of 86.5% (Ssm). Cluster group A contained strains phenotypically related to S. griseus or S. exfoliatus, whereas cluster group B contained strains which were phenotypically related to S. violaceus or S. rochei. The majority of the pathogenic isolates and reference strains were assigned to S. violaceus (57%) and S. griseus (22%). A DNA probe derived from the rRNA operon of S. coelicolor IMET 40271 was used to detect restriction fragment length polymorphisms (RELPs) among 40 pathogenic and nonpathogenic Streptomyces isolates. Southern blots revealed a high degree of diversity among the pathogenic strains tested. No significant correlation between numerical classification and RFLP grouping of Streptomyces strains could be revealed. The results obtained suggest that RFLP data are of minor importance in classification of Streptomyces species and that genes for pathogenicity determinants are spread among different Streptomyces species by mobilizable elements. Images PMID:16348823

  9. Distributed strain monitoring for bridges: temperature effects

    NASA Astrophysics Data System (ADS)

    Regier, Ryan; Hoult, Neil A.

    2014-03-01

    To better manage infrastructure assets as they reach the end of their service lives, quantitative data is required to better assess structural behavior and allow for more informed decision making. Distributed fiber optic strain sensors are one sensing technology that could provide comprehensive data for use in structural assessments as these systems potentially allow for strain to be measured with the same accuracy and gage lengths as conventional strain sensors. However, as with many sensor technologies, temperature can play an important role in terms of both the structure's and sensor's performance. To investigate this issue a fiber optic distributed strain sensor system was installed on a section of a two span reinforced concrete bridge on the TransCanada Highway. Strain data was acquired several times a day as well as over the course of several months to explore the effects of changing temperature on the data. The results show that the strain measurements are affected by the bridge behavior as a whole. The strain measurements due to temperature are compared to strain measurements that were taken during a load test on the bridge. The results show that even a small change in temperature can produce crack width and strain changes similar to those due to a fully loaded transport truck. Future directions for research in this area are outlined.

  10. Strain induced fragility transition in metallic glass

    PubMed Central

    Yu, Hai-Bin; Richert, Ranko; Maaß, Robert; Samwer, Konrad

    2015-01-01

    Relaxation dynamics are the central topic in glassy physics. Recently, there is an emerging view that mechanical strain plays a similar role as temperature in altering the relaxation dynamics. Here, we report that mechanical strain in a model metallic glass modulates the relaxation dynamics in unexpected ways. We find that a large strain amplitude makes a fragile liquid become stronger, reduces dynamical heterogeneity at the glass transition and broadens the loss spectra asymmetrically, in addition to speeding up the relaxation dynamics. These findings demonstrate the distinctive roles of strain compared with temperature on the relaxation dynamics and indicate that dynamical heterogeneity inherently relates to the fragility of glass-forming materials. PMID:25981888

  11. Predictions Of Fatigue Damage From Strain Histories

    NASA Technical Reports Server (NTRS)

    Sire, Robert A.; Besuner, Philip M.; Toomey, Tim

    1989-01-01

    Semiempirical mathematical model of fatigue damage in stressed objects uses experimental histories of strains in those objects to predict fatigue lives. Accounts for initiation and propagation of fatigue cracks on cycle-by-cycle basis. Measured strain history first digitized, then converted to history of turning-point strains for purposes of analysis. Data between turning points not used. When model calibrated against proper test data for each type of object characterized, its predictions of fatigue lives superior to statistical models as one based on root-mean-square strain.

  12. Strain accommodation in inelastic deformation of glasses

    NASA Astrophysics Data System (ADS)

    Murali, P.; Ramamurty, U.; Shenoy, Vijay B.

    2007-01-01

    Motivated by recent experiments on metallic glasses, we examine the micromechanisms of strain accommodation including crystallization and void formation during inelastic deformation of glasses by employing molecular statics simulations. Our atomistic simulations with Lennard-Jones-like potentials suggests that a softer short range interaction between atoms favors crystallization. Compressive hydrostatic strain in the presence of a shear strain promotes crystallization whereas a tensile hydrostatic strain is found to induce voids. The deformation subsequent to the onset of crystallization includes partial reamorphization and recrystallization, suggesting important atomistic mechanisms of plastic dissipation in glasses.

  13. Inflatable device for installing strain gage bridges

    NASA Technical Reports Server (NTRS)

    Cook, C. E.; Smith, G. E.; Monaghan, R. C. (Inventor)

    1983-01-01

    Methods and devices for installing in a tubular shaft multiple strain gages are disclosed with focus on a method and a device for pneumatically forcing strain gages into seated engagement with the internal surfaces of a tubular shaft in an installation of multiple strain gages in a tubular shaft. The strain gages or other electron devices are seated in a template-like component which is wrapped about a pneumatically expansible body. The component is inserted into a shaft and the body is pneumatically expanded after a suitable adhesive was applied to the surfaces.

  14. Acceleration and Velocity Sensing from Measured Strain

    NASA Technical Reports Server (NTRS)

    Pak, Chan-Gi; Truax, Roger

    2016-01-01

    A simple approach for computing acceleration and velocity of a structure from the strain is proposed in this study. First, deflection and slope of the structure are computed from the strain using a two-step theory. Frequencies of the structure are computed from the time histories of strain using a parameter estimation technique together with an Autoregressive Moving Average model. From deflection, slope, and frequencies of the structure, acceleration and velocity of the structure can be obtained using the proposed approach. shape sensing, fiber optic strain sensor, system equivalent reduction and expansion process.

  15. True stress-strain curves of cold worked stainless steel over a large range of strains

    NASA Astrophysics Data System (ADS)

    Kamaya, Masayuki; Kawakubo, Masahiro

    2014-08-01

    True stress-strain curves for cold worked stainless steel were obtained over a range of strains that included a large strain exceeding the strain for the tensile strength (post-necking strain). A specified testing method was used to obtain the stress-strain curves in air at room temperature. The testing method employed the digital image correlation (DIC) technique and iterative finite element analyses (FEA) and was referred to as IFD (Iteration FEA procedure based on DIC measurement) method. Although hourglass type specimens have been previously used for the IFD method, in this study, plate specimens with a parallel gage section were used to obtain accurate yield and tensile strengths together with the stress-strain curves. The stress-strain curves including the post-necking strain were successfully obtained by the IFD method, and it was shown that the stress-strain curves for different degrees of cold work collapsed onto a single curve when the offset strain was considered. It was also shown that the Swift type constitutive equation gave good regression for the true stress-strain curves including the post-necking strain regardless of the degree of cold work, although the Ramberg-Osgood type constitutive equation showed poor fit. In the regression for the Swift type constitutive equation, the constant for power law could be assumed to be nS = 0.5.

  16. Strain Rate Dependency of Coarse Crystal Marble Under Uniaxial Compression: Strength, Deformation and Strain Energy

    NASA Astrophysics Data System (ADS)

    Li, Yanrong; Huang, Da; Li, Xi'an

    2014-07-01

    Strain rate during testing, uniaxial or triaxial, has important influence on the measured mechanical properties of rocks. Uniaxial compression tests were performed at nine pre-specified static-to-quasistatic strain rates (ranging from 1 × 10-5 to 1 × 10-1 s-1) on coarse crystal marble. The aim is to gain deep insight into the influence of strain rate on characteristic stresses, deformation properties and conversion of strain energy of such rock. It is found that the strain rate of 5 × 10-3 s-1 is the threshold to delineate the failure modes the tested coarse marble behaves in. At a strain rate less than this threshold, single-plane shear and conjugate X-shaped shear are the main failure modes, while beyond this threshold, extensile and splitting failures are dominant. The stress for crack initiation, the critical stress for dilation, the peak stress, and Young's modulus are all found to increase with strain rate, with an exception that the above stresses and modulus appear relatively low compared to the strain rate in the range of between 1 × 10-4 and 5 × 10-3 s-1. The pre-peak absorbed strain energy, damage strain energy and elastic strain energy are found to increase with strain rate. In addition, the elastic strain energy stored before peak point favors brittle failure of the specimen, as the more stored elastic energy in the specimen, the stronger the fragmenting.

  17. Conduction band structure and electron mobility in uniaxially strained Si via externally applied strain in nanomembranes

    NASA Astrophysics Data System (ADS)

    Chen, Feng; Euaruksakul, Chanan; Liu, Zheng; Himpsel, F. J.; Liu, Feng; Lagally, Max G.

    2011-08-01

    Strain changes the band structure of semiconductors. We use x-ray absorption spectroscopy to study the change in the density of conduction band (CB) states when silicon is uniaxially strained along the [1 0 0] and [1 1 0] directions. High stress can be applied to silicon nanomembranes, because their thinness allows high levels of strain without fracture. Strain-induced changes in both the sixfold degenerate Δ valleys and the eightfold degenerate L valleys are determined quantitatively. The uniaxial deformation potentials of both Δ and L valleys are directly extracted using a strain tensor appropriate to the boundary conditions, i.e., confinement in the plane in the direction orthogonal to the straining direction, which correspond to those of strained CMOS in commercial applications. The experimentally determined deformation potentials match the theoretical predictions well. We predict electron mobility enhancement created by strain-induced CB modifications.

  18. A comparison of eastern North American seismic strain-rates to glacial rebound strain-rates

    NASA Technical Reports Server (NTRS)

    James, Thomas S.; Bent, Allison L.

    1994-01-01

    Glacial rebound strain-rates computed using a simple Laurentide glacial loading model are of the order of 10(exp -9) per year within the region of glaciation and extending several hundred kilometers beyond. The horizontal strain-rates receive approximately equal contributions from horizontal and vertical velocities, a consequence of the spherical geometry adopted for the Earth model. In the eastern United States and southeastern Canada the computed strain-rates are 1-3 orders of magnitude greater than an estimate of the average seismic strain-rate (Anderson, 1986) and approximately 1 order of magnitude greater than predicted erosional strain-rates. The predicted glacial rebound strain-rates are not, in general, oriented in such a way as to augment the observed state of deviatoric stress, possibly explaining why the seismic strain-rates are much smaller than the glacial rebound strain-rates. An exception to this may be seismically active regions in the St. Lawrence valley.

  19. The Stress-Strain Condition Estimation of Detail in Crack Tip by Integral Strain Gauges

    NASA Astrophysics Data System (ADS)

    Syzrantsev, V.; Syzrantseva, K.

    2016-04-01

    The paper considers the task of stress-strain condition calculation of experimental sample in fatigue crack tip on weld boundary at its cyclic deforming. For this task decision authors use the information obtained by original means of cyclic strains measurement: Integral Strain Gauges. The results of carried experimental researches are compared with data of stress-strain condition estimation of detail in crack tip calculated by Finish Element Method.

  20. General Strain Theory and Delinquency: Focusing on the Influences of Key Strain Characteristics on Delinquency

    ERIC Educational Resources Information Center

    Moon, Byongook; Blurton, David; McCluskey, John D.

    2008-01-01

    The study examines the effects of recent, older, and chronic strains and of perceived injustice of strain on delinquency, sampling 777 Korean youth. Seven key strains most likely leading to delinquency, some of which were often overlooked in previous research, were included, and these are family conflict, parental punishment, teachers' punishment,…

  1. Differentiation of Lactobacillus strains by ribotyping.

    PubMed Central

    Rodtong, S; Tannock, G W

    1993-01-01

    Fifty-four lactobacillus strains were differentiated by ribotyping. The stability of ribotypes characteristic of four strains of lactobacilli inhabiting the digestive tract of mice was investigated. One of four isolates of Lactobacillus delbrueckii GT21, which had been associated with mice for 22 months, had an altered ribotype. Images PMID:7504432

  2. Strain engineering in graphene by laser irradiation

    SciTech Connect

    Papasimakis, N.; Mailis, S.; Huang, C. C.; Al-Saab, F.; Hewak, D. W.; Luo, Z.; Shen, Z. X.

    2015-02-09

    We demonstrate that the Raman spectrum of graphene on lithium niobate can be controlled locally by continuous exposure to laser irradiation. We interpret our results in terms of changes to doping and mechanical strain and show that our observations are consistent with light-induced gradual strain relaxation in the graphene layer.

  3. Fiscal Strain in an Era of Retrenchment.

    ERIC Educational Resources Information Center

    Hentschke, Guilbert; Yagielski, John

    Preliminary results of a three-year study of fifteen school districts indicate that fiscal strain results from both "intended" and "unintended" factors. The authors construct a model of fiscal strain that combines budget constraints with school district decision-makers' preference functions and indifference curves. Using this model and 1976 and…

  4. High-Temperature Resistance Strain Gauges

    NASA Technical Reports Server (NTRS)

    Lei, Jih-Fen

    1994-01-01

    Resistance strain gauges developed for use at high temperatures in demanding applications like testing aircraft engines and structures. Measures static strains at temperatures up to 800 degrees C. Small and highly reproducible. Readings corrected for temperature within small tolerances, provided temperatures measured simultaneously by thermocouples or other suitable devices. Connected in wheatstone bridge.

  5. Marital Role Strain and Sexual Satisfaction.

    ERIC Educational Resources Information Center

    Frank, Ellen; And Others

    1979-01-01

    Responses to a questionnaire pertaining to discrepancies between an individual's ideal and actual marital role behaviors and level of sexual satisfaction indicated lower levels of role strain in nonpatient couples. A higher level of role strain correlated with increased sexual dissatisfaction. (Author)

  6. Genome Annotation of Five Mycoplasma canis Strains

    PubMed Central

    May, M.; Michaels, D. L.; Barbet, A. F.

    2012-01-01

    To understand its potential to cause invasive disease, the genome of Mycoplasma canis strain PG14T from a dog's throat was compared to those of isolates from the genital tract or brain of dogs. The average nucleotide identity between strain pairs is 98%, and their genome annotations are similar. PMID:22815452

  7. Surfactin production by strains of Bacillus mojavensis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bacillus mojavensis, RRC101 is an endophytic bacterium patented for control of fungal diseases in maize and other plants. DNA fingerprint analysis of the rep-PCR fragments of 35 B. mojavensis and 4 B. subtilis strains using the Diversilab genotyping system revealed genotypic distinctive strains alon...

  8. Medically Complex Home Care and Caregiver Strain

    ERIC Educational Resources Information Center

    Moorman, Sara M.; Macdonald, Cameron

    2013-01-01

    Purpose of the study: To examine (a) whether the content of caregiving tasks (i.e., nursing vs. personal care) contributes to variation in caregivers' strain and (b) whether the level of complexity of nursing tasks contributes to variation in strain among caregivers providing help with such tasks. Design and methods: The data came from the Cash…

  9. Silicon stress/strain activities at JPL

    NASA Technical Reports Server (NTRS)

    Chen, C. P.

    1986-01-01

    In-house Jet Propulsion Laboratory (JPL) work is described for silicon stress/strain, including the study of fracture mechanics, and on the high-temperature test program in which the low-strain response of silicon sheet materials above 1000 C is being measured and high temperature material property data are being determined.

  10. Nanocomposite Strain Gauges Having Small TCRs

    NASA Technical Reports Server (NTRS)

    Gregory, Otto; Chen, Ximing

    2009-01-01

    Ceramic strain gauges in which the strain-sensitive electrically conductive strips made from nanocomposites of noble metal and indium tin oxide (ITO) are being developed for use in gas turbine engines and other power-generation systems in which gas temperatures can exceed 1,500 F (about 816 C). In general, strain gauges exhibit spurious thermally induced components of response denoted apparent strain. When temperature varies, a strain-gauge material that has a nonzero temperature coefficient of resistance (TCR) exhibits an undesired change in electrical resistance that can be mistaken for the change in resistance caused by a change in strain. It would be desirable to formulate straingauge materials having TCRs as small as possible so as to minimize apparent strain. Most metals exhibit positive TCRs, while most semiconductors, including ITO, exhibit negative TCRs. The present development is based on the idea of using the negative TCR of ITO to counter the positive TCRs of noble metals and of obtaining the benefit of the ability of both ITO and noble metals to endure high temperatures. The noble metal used in this development thus far has been platinum. Combinatorial libraries of many ceramic strain gauges containing nanocomposites of various proportions of ITO and platinum were fabricated by reactive co-sputtering from ITO and platinum targets onto alumina- and zirconia-based substrates mounted at various positions between the targets.

  11. High strain rate behavior of polyurea compositions

    NASA Astrophysics Data System (ADS)

    Joshi, Vasant S.; Milby, Christopher

    2012-03-01

    High-strain-rate response of three polyurea compositions with varying molecular weights has been investigated using a Split Hopkinson Pressure Bar arrangement equipped with aluminum bars. Three polyurea compositions were synthesized from polyamines (Versalink, Air Products) with a multi-functional isocyanate (Isonate 143L, Dow Chemical). Amines with molecular weights of 1000, 650, and a blend of 250/1000 have been used in the current investigation. These materials have been tested to strain rates of over 6000/s. High strain rate results from these tests have shown varying trends as a function of increasing strain. While higher molecular weight composition show lower yield, they do not show dominant hardening behavior at lower strain. On the other hand, the blend of 250/1000 show higher load bearing capability but lower strain hardening effects than the 600 and 1000 molecular weight amine based materials. Results indicate that the initial increase in the modulus of the blend of 250/1000 may lead to the loss of strain hardening characteristics as the material is compressed to 50% strain, compared to 1000 molecular weight amine based material.

  12. Whole genome sequences of four Brucella strains.

    PubMed

    Ding, Jiabo; Pan, Yuanlong; Jiang, Hai; Cheng, Junsheng; Liu, Taotao; Qin, Nan; Yang, Yi; Cui, Buyun; Chen, Chen; Liu, Cuihua; Mao, Kairong; Zhu, Baoli

    2011-07-01

    Brucella melitensis and Brucella suis are intracellular pathogens of livestock and humans. Here we report four genome sequences, those of the virulent strain B. melitensis M28-12 and vaccine strains B. melitensis M5 and M111 and B. suis S2, which show different virulences and pathogenicities, which will help to design a more effective brucellosis vaccine. PMID:21602346

  13. Bicrystals with strain gradient effects

    SciTech Connect

    Shu, J.Y.

    1997-01-09

    Boundary between two perfectly bonded single crystals plays an important role in determining the deformation of the bicrystals. This work addresses the role of the grain boundary by considering the elevated hardening of a slip system due to a slip gradient. The slip gradients are associated with geometrically necessary dislocations and their effects become pronounced when a representative length scale of the deformation field is comparable to the dominant microstructural length scale of a material. A new rate-dependent crystal plasticity theory is presented and has been implemented within the finite element method framework. A planar bicrystal under uniform in-plane loading is studied using the new crystal theory. The strain is found to be continuous but nonuniform within a boundary layer around the interface. The lattice rotation is also nonuniform within the boundary layer. The width of the layer is determined by the misorientation of the grains, the hardening of slip systems, and most importantly by the characteristic material length scales. The overall yield strength of the bicrystal is also obtained. A significant grain-size dependence of the yield strength, the Hall- Petch effect is predicted.

  14. New naphthalene-degrading marine Pseudomonas strains.

    PubMed Central

    García-Valdés, E; Cozar, E; Rotger, R; Lalucat, J; Ursing, J

    1988-01-01

    Over 100 strains that utilized naphthalene as the only carbon and energy source were isolated from samples of marine sediments taken from a heavily polluted area. The isolates were characterized taxonomically and physiologically. Most of these strains belonged to the genus Pseudomonas, and seven of them did not fit any previous taxonomic description. They differed from type strains in a few biochemical characteristics and in the utilization of aromatic compounds. None had catechol 1,2-dioxygenase activity, and catechol 2,3-dioxygenase was responsible for the aromatic ring cleavage. DNA hybridization demonstrated a close relationship between two isolates and the Pseudomonas stutzeri type strain, and between five isolates and the Pseudomonas testosteroni type strain. On the basis of nutritional and enzymatic characteristics, it was assumed that the seven isolates represent new biovars belonging to the species P. testosteroni and P. stutzeri that are able to degrade aromatic hydrocarbons. Images PMID:3202629

  15. Mechanical strain effects on black phosphorus nanoresonators.

    PubMed

    Wang, Cui-Xia; Zhang, Chao; Jiang, Jin-Wu; Park, Harold S; Rabczuk, Timon

    2016-01-14

    We perform classical molecular dynamics simulations to investigate the effects of mechanical strain on single-layer black phosphorus nanoresonators at different temperatures. We find that the resonant frequency is highly anisotropic in black phosphorus due to its intrinsic puckered configuration, and that the quality factor in the armchair direction is higher than in the zigzag direction at room temperature. The quality factors are also found to be intrinsically larger than those in graphene and MoS2 nanoresonators. The quality factors can be increased by more than a factor of two by applying tensile strain, with uniaxial strain in the armchair direction being the most effective. However, there is an upper bound for the quality factor increase due to nonlinear effects at large strains, after which the quality factor decreases. The tension induced nonlinear effect is stronger along the zigzag direction, resulting in a smaller maximum strain for quality factor enhancement. PMID:26649476

  16. Nanoscale strain mapping in battery nanostructures

    SciTech Connect

    Ulvestad, A. Kim, J. W.; Dietze, S. H.; Shpyrko, O. G.; Cho, H. M.; Meng, Y. S.; Harder, R.; Fohtung, E.

    2014-02-17

    Coherent x-ray diffraction imaging is used to map the local three dimensional strain inhomogeneity and electron density distribution of two individual LiNi{sub 0.5}Mn{sub 1.5}O{sub 4−δ} cathode nanoparticles in both ex-situ and in-situ environments. Our reconstructed images revealed a maximum strain of 0.4%. We observed different variations in strain inhomogeneity due to multiple competing effects. The compressive/tensile component of the strain is connected to the local lithium content and, on the surface, interpreted in terms of a local Jahn-Teller distortion of Mn{sup 3+}. Finally, the measured strain distributions are discussed in terms of their impact on competing theoretical models of the lithiation process.

  17. New naphthalene-degrading marine Pseudomonas strains

    SciTech Connect

    Garcia-Valdes, E.; Cozar, E.; Rotger, R. Lalucat, J. ); Ursing, J. )

    1988-10-01

    Over 100 strains that utilized naphthalene as the only carbon and energy source were isolated from samples of marine sediments taken from a heavily polluted area. The isolates were characterized taxonomically and physiologically. Most of these strains belonged to the genus Pseudomonas, and seven of them did not fit any previous taxonomic description. They differed from type strains in a few biochemical characteristics and in the utilization of aromatic compounds. None had catechol 1,2-dioxygenase activity, and catechol 2,3-dioxygenase was responsible for the aromatic ring cleavage. DNA hybridizations demonstrated a close relationship between two isolates and the Pseudomonas stutzeri type strain, and between five isolates and the Pseudomonas testosteroni type strain. On the basis of nutritional and enzymatic characteristics, it was assumed that the seven isolates represent new biovars belonging to the species P. testosteroni and P. stutzeri that are able to degrade aromatic hydrocarbons.

  18. Micro-scale strain mapping technique: a tool to quantify strain partitioning during creep deformation

    NASA Astrophysics Data System (ADS)

    Quintanilla-Terminel, Alejandra; Zimmerman, Mark; Evans, Brian; Kohlstedt, David

    2016-04-01

    Several deformation mechanisms interact to accommodate plastic deformation. Quantifying the contribution of each to the total strain is necessary for establishing a better link between observed microstructures and mechanical data, as well as to allow more confident extrapolation from laboratory to natural conditions. In this contribution, we present the experimental and computational technique involved in micro-scale strain mapping (MSSM). The MSSM technique relies on analyzing the relative displacement of initially regularly spaced markers after deformation. We present several microfabrication techniques that permit us to pattern various rocks with micrometric and nanometric metal markers, as well as the challenges faced in working at high temperatures and pressures. A Hough transform algorithm was used to detect the markers and automate as much as possible the strain analysis. The von Mises strain is calculated for a set of n-points and their relative displacements, which allow us to map the strain at different length scales. We applied the MSSM technique to study strain partitioning during deformation creep of Carrara marble and San Carlos olivine at a confining pressure, Pc, of 300 MPa and homologous temperatures of 0.3 to 0.6. We measured the local strain and strain heterogeneity produced during creep deformation of split cylinders of Carrara marble under conventional triaxial loading to inelastic strains of 11 to 36% at a strain rate of 3x10‑5s‑1, Pc = 300 MPa and 400o < T <700oC. We conclude that the evolution of deformation structures in marble takes place over a substantial interval in strain and that the duration of this interval depends on strain rate, temperature, and pressure. Our first results on strain mapping of olivine deformed at T = 1150oC and Pc = 300 MPa demonstrate promise for characterizing intragranular strain and better defining the contribution of grain boundary sliding to the total strain.

  19. Human prion strain selection in transgenic mice

    PubMed Central

    Giles, Kurt; Glidden, David V.; Patel, Smita; Korth, Carsten; Groth, Darlene; Lemus, Azucena; DeArmond, Stephen J.; Prusiner, Stanley B.

    2010-01-01

    Transgenic (Tg) mice expressing chimeras of mouse and human prion proteins (PrP) have shorter incubation periods for Creutzfeldt-Jakob disease (CJD) prions than mice expressing full-length human PrP. Increasing the sequence similarity of the chimeric PrP to mouse PrP, by reverting human residues to mouse, resulted in a Tg line, denoted Tg22372, which was susceptible to sporadic (s) CJD prions in ~110 days 1. Reversion of one additional residue (M111V) resulted in a new Tg line, termed Tg1014, susceptible to sCJD prions in ~75 days. Tg1014 mice also has shorter incubation periods for variant (v) CJD prions, providing a more tractable model for studying this prion strain. Transmission of vCJD prions to Tg1014 mice resulted in two different strains, determined by neuropathology and biochemical analysis, which correlated with the length of the incubation time. One strain had the biochemical, neuropathological, and transmission characteristics including longer incubation times of the inoculated vCJD strain; the second strain produced a phenotype resembling that of sCJD prions including relatively shorter incubation periods. Mice with intermediate incubation periods for vCJD prions had a mixture of the two strains. Both strains were serially transmitted in Tg1014 mice, which led to further reduction in incubation periods. Conversion of vCJD-like to sCJD-like strains was favored in Tg1014 mice more than in the Tg22372 line. The single amino acid difference therefore appears to offer selective pressure for propagation of the sCJD-like strain. These two Tg mouse lines provide relatively rapid models to study human prion diseases as well as the evolution of human prion strains. PMID:20695008

  20. Conjugal transfer and characterization of bacteriocin plasmids in group N (lactic acid) streptococci.

    PubMed Central

    Neve, H; Geis, A; Teuber, M

    1984-01-01

    Thirteen bacteriocin-producing strains of group N (lactic acid) streptococci were screened for their potential to transfer this property by conjugation to Streptococcus lactis subsp. diacetylactis Bu2-60. Bacteriocin production in three strains was plasmid encoded as shown by conjugal transfer and by analysis of cured, bacteriocin-negative derivatives of the donor strains and the transconjugants. With Streptococcus cremoris strains 9B4 and 4G6 and S. lactis subsp. diacetylactis 6F7 as donors, bacteriocin-producing transconjugants were isolated with frequencies ranging from ca. 2 X 10(-2) to 2 X 10(-1) per recipient cell. Bacteriocin-producing transconjugants had acquired a 39.6-megadalton plasmid from the donor strains 9B4 and 4G6, and a 75-megadalton plasmid from the donor strain 6F7. As shown by restriction endonuclease analysis, the plasmids from strains 9B4 and 4G6 were almost identical. The plasmid from strain 6F7 yielded some additional fragments not present in the two other plasmids. In hybridization experiments any of the three plasmids strongly hybridized with each other and with some other bacteriocin but nontransmissible plasmids from other S. cremoris strains. Homology was also detected to a variety of cryptic plasmids in lactic acid streptococci. Images PMID:6321437

  1. Nonlinear stress-strain behavior of carbon nanotube fibers subject to slow sustained strain rate

    NASA Astrophysics Data System (ADS)

    Sun, Gengzhi; Wang, Dong; Pang, John H. L.; Liu, Jun; Zheng, Lianxi

    2013-09-01

    Nonlinear stress-strain behavior of carbon nanotube (CNT) fibers is studied based on the test data where fiber strength can be modeled by the Weibull distribution. CNT fibers spun from vertically aligned arrays are tensioned at slow sustained strain rate (0.00001 1/s) to study the tensile strength resulting from sliding-to-failure effects. A model is developed to estimate the Weibull modulus which characterizes the dispersion of fiber strengths in terms of the maximum sustained stress and failure strain of the fibers. The results show that the sliding indeed has great influence on the stress-strain relation of CNT fibers at low strain rate.

  2. Strain relaxation in buried strained layers by mixture of single and dipolar dislocation arrays

    NASA Astrophysics Data System (ADS)

    Jin, Z.; Yang, S.; Ma, C.; Liu, S.

    1999-06-01

    The strain relaxation in buried strained layers is investigated using an elastic continuum model. The mixture of single dislocations residing at the substrate/strained layer interface (lower interface) and dipolar dislocations in which one is at the lower interface and the other at the strained layer/capping layer interface (upper interface), is proposed. In the mixture, the dislocation distributions are denoted by a parameter which is the ratio of the density of misfit dislocations at the upper interface to that at the lower interface. In a buried strained layer, relaxation of mean strain occurs by introduction of two orthogonal arrays of mixture of single and dipolar dislocations. Considering both the free surface and interactions between dislocations, the total elastic energy per unit area of buried strained layer containing two orthogonal arrays of mixture of single and dipolar dislocations is calculated. The energy is dependent on the misfit dislocation distributions. On energy minimization considerations, the expression of the misfit dislocation distributions in a buried strained layer with arbitrary strain relaxation and capping layer thickness is derived. It is demonstrated that the strain is initially relaxed by the single misfit dislocations and relaxed by the mixture of single and dipolar misfit dislocations in the final stage of strain relaxation in many buried layers of practical interest.

  3. In vitro strain measurement in the porcine antrum using ultrasound doppler strain rate imaging.

    PubMed

    Ahmed, Aymen Bushra; Gilja, Odd Helge; Gregersen, Hans; Ødegaard, Svein; Matre, Knut

    2006-04-01

    Strain rate imaging (SRI) enables study of deformation in soft tissues. The aim of this study was to evaluate the accuracy of SRI in measuring strain in the porcine antral wall in vitro. An experimental set-up enabled controlled distension of a porcine stomach in a saline reservoir. Radial strain obtained by SRI was compared with radial strain calculated from B-mode ultrasonography. Circumferential strain obtained by SRI was compared with circumferential strain calculated from sonomicrometry. The agreement between radial strain values measured by SRI and B-mode, along and across several ultrasound (US) beams, using US frequency 6.7 MHz and strain length (SL) = 1.9 mm was = -1.0 +/- 12.1% and 0.5 +/- 13.4%, respectively (mean difference +/- 2SD%) and it was better than with SL 1.2 mm. Compared with sonomicrometry, SRI-determined circumferential strain using 6.7 MHz and SL = 1.9 mm was less accurate, whether averaging along or across several US beams (-9.2 +/- 46.7% and 13.8 +/- 51.2%, respectively). In conclusion, SRI gave accurate measurement of radial strain of the antral wall, but seemed to be less accurate for measurement of circumferential strain for this in vitro set-up. PMID:16616598

  4. Amerindian Helicobacter pylori Strains Go Extinct, as European Strains Expand Their Host Range

    PubMed Central

    Domínguez-Bello, Maria G.; Pérez, Maria E.; Bortolini, Maria C.; Salzano, Francisco M.; Pericchi, Luis R.; Zambrano-Guzmán, Orlisbeth; Linz, Bodo

    2008-01-01

    We studied the diversity of bacteria and host in the H. pylori-human model. The human indigenous bacterium H. pylori diverged along with humans, into African, European, Asian and Amerindian groups. Of these, Amerindians have the least genetic diversity. Since niche diversity widens the sets of resources for colonizing species, we predicted that the Amerindian H. pylori strains would be the least diverse. We analyzed the multilocus sequence (7 housekeeping genes) of 131 strains: 19 cultured from Africans, 36 from Spanish, 11 from Koreans, 43 from Amerindians and 22 from South American Mestizos. We found that all strains that had been cultured from Africans were African strains (hpAfrica1), all from Spanish were European (hpEurope) and all from Koreans were hspEAsia but that Amerindians and Mestizos carried mixed strains: hspAmerind and hpEurope strains had been cultured from Amerindians and hpEurope and hpAfrica1 were cultured from Mestizos. The least genetically diverse H. pylori strains were hspAmerind. Strains hpEurope were the most diverse and showed remarkable multilocus sequence mosaicism (indicating recombination). The lower genetic structure in hpEurope strains is consistent with colonization of a diversity of hosts. If diversity is important for the success of H. pylori, then the low diversity of Amerindian strains might be linked to their apparent tendency to disappear. This suggests that Amerindian strains may lack the needed diversity to survive the diversity brought by non-Amerindian hosts. PMID:18830403

  5. Fabrication and device characteristics of strained-Si-on-insulator (strained-SOI) CMOS

    NASA Astrophysics Data System (ADS)

    Takagi, Shin-ichi; Mizuno, Tomohisa; Tezuka, Tsutomu; Sugiyama, Naoharu; Numata, Toshinori; Usuda, Koji; Moriyama, Yoshihiko; Nakaharai, Shu; Koga, Junji; Tanabe, Akihito; Maeda, Tatsuro

    2004-03-01

    Strained-Si-on-insulator (strained-SOI) CMOS is a promising device structure for satisfying requirements of both high current drive and low supply voltage under sub-100 nm nodes, because of the combination of advantages of SOI MOSFETs and high mobility strained-Si channels. In this paper, we present the concept, the device structures and the fabrication techniques of strained-SOI CMOS. We introduce our original fabrication method of strained-SOI substrates, called the Ge condensation technique. It is experimentally shown that strained-SOI CMOS has higher electron and hole mobility and that strained-SOI CMOS ring oscillators successfully operate with the performance enhancement of 30-70% against conventional SOI CMOS ones.

  6. Highly Invasive Listeria monocytogenes Strains Have Growth and Invasion Advantages in Strain Competition

    PubMed Central

    Manthou, Evanthia; Ciolacu, Luminita; Wagner, Martin; Skandamis, Panagiotis N.

    2015-01-01

    Multiple Listeria monocytogenes strains can be present in the same food sample; moreover, infection with more than one L. monocytogenes strain can also occur. In this study we investigated the impact of strain competition on the growth and in vitro virulence potential of L. monocytogenes. We identified two strong competitor strains, whose growth was not (or only slightly) influenced by the presence of other strains and two weak competitor strains, which were outcompeted by other strains. Cell contact was essential for growth inhibition. In vitro virulence assays using human intestinal epithelial Caco2 cells showed a correlation between the invasion efficiency and growth inhibition: the strong growth competitor strains showed high invasiveness. Moreover, invasion efficiency of the highly invasive strain was further increased in certain combinations by the presence of a low invasive strain. In all tested combinations, the less invasive strain was outcompeted by the higher invasive strain. Studying the effect of cell contact on in vitro virulence competition revealed a complex pattern in which the observed effects depended only partially on cell-contact suggesting that competition occurs at two different levels: i) during co-cultivation prior to infection, which might influence the expression of virulence factors, and ii) during infection, when bacterial cells compete for the host cell. In conclusion, we show that growth of L. monocytogenes can be inhibited by strains of the same species leading potentially to biased recovery during enrichment procedures. Furthermore, the presence of more than one L. monocytogenes strain in food can lead to increased infection rates due to synergistic effects on the virulence potential. PMID:26529510

  7. Volume strain within The Geysers geothermal field

    NASA Astrophysics Data System (ADS)

    Mossop, Antony; Segall, Paul

    1999-12-01

    During the 1970s and 1980s, The Geysers geothermal region was rapidly developed as a site of geothermal power production. The likelihood that this could cause significant strain within the reservoir, with corresponding surface displacements, led to a series of deformation monitoring surveys. In 1973, 1975, 1977, and 1980, The Geysers region was surveyed using first-order, class I, spirit leveling. In 1994, 1995, and 1996, many of the leveling control monuments were resurveyed using high-precision Global Positioning System receivers. The two survey methods are reconciled using the GEOID96 geoid model. The displacements are inverted to determine volume strain within the reservoir. For the period 1980-1994, peak volume strains in excess of 5×10-4 are imaged. There is an excellent correlation between the observed changes in reservoir steam pressures and the imaged volume strain. If reservoir pressure changes are inducing volume strain, then the reservoir quasi-static bulk modulus K must be <4.6×109 Pa. However, seismic velocities indicate a much suffer reservoir with K = 3.4 × 1010 Pa. This apparent discrepancy is shown to be consistent with predicted frequency dependence in K for fractured and water-saturated rock. Inversion of surface deformation data therefore appears to be a powerful method for imaging pressure change within the body of the reservoir. Correlation between induced seismicity at The Geysers and volume strain is observed. However, earthquake distribution does not appear to have a simple relationship with volume strain rate.

  8. Strain mapping analysis of textile composites

    NASA Astrophysics Data System (ADS)

    Ivanov, Dmitry; Ivanov, Sergey; Lomov, Stepan; Verpoest, Ignaas

    2009-03-01

    The focus of the work is meso-scale analysis (scale level of the fabric unit cell) of textile composite deformation and failure. The surface strain measurement is used for: (1) experimental investigation, which includes study of strain distribution at various stages of deformation, plasticity detection, damage initiation; (2) numerical validation of the correspondent finite element (FE) models. Two examples are considered: carbon-epoxy triaxial-braided and glass polypropylene-woven composite. The surface strain measurement (by digital image correlation technique) accompanies the tensile tests, aiming at: (1) elastic anisotropic constants characterisation, (2) study of non-linear material behaviour (for the thermoplastic composite), (3) control of homogeneity of the macro-strain distribution, and (4) analysis of damage initiation in brittle composites. Validation of meso-FE models by strain measurements encounters difficulties arising from (1) resolution of the strain measurements, (2) irregularities of the initial structure such as random layer nesting, ply interaction, and deviation of yarns from their theoretical position, which affects the measured strain fields. The paper discusses these difficulties and demonstrates a qualitative agreement with the FE analysis of idealised composite configurations.

  9. Strain engineering of graphene: a review.

    PubMed

    Si, Chen; Sun, Zhimei; Liu, Feng

    2016-02-14

    Graphene has intrigued the science community by many unique properties not found in conventional materials. In particular, it is the strongest two-dimensional material ever measured, being able to sustain reversible tensile elastic strain larger than 20%, which yields an interesting possibility to tune the properties of graphene by strain and thus opens a new field called "straintronics". In this article, the current progress in the strain engineering of graphene is reviewed. We first summarize the strain effects on the electronic structure and Raman spectra of graphene. We then highlight the electron-phonon coupling greatly enhanced by the biaxial strain and the strong pseudomagnetic field induced by the non-uniform strain with specific distribution. Finally, the potential application of strain-engineering in the self-assembly of foreign atoms on the graphene surface is also discussed. Given the short history of graphene straintronics research, the current progress has been notable, and many further advances in this field are expected. PMID:26796960

  10. Microstructural Analysis of Welding: Deformation and Strain

    NASA Astrophysics Data System (ADS)

    Quane, S. L.; Russell, K.

    2003-12-01

    Welding in pyroclastic deposits involves the sintering, compaction and flattening of hot glassy particles and is attended by systematic changes in physical properties. Welded materials contain implicit information regarding the total accumulated strain as well as the mechanisms of deformation. Here, we use detailed microstructural analysis of synthetic and natural welded materials to make quantitative estimates of strain and constrain the rheology of these materials during the welding process. Part one of our study comprises microstructural analysis of end products from unconfined high temperature deformation experiments on sintered cores of soda-lime silica glass spheres. This analogue material has relatively simple and well-characterized starting properties. Furthermore, the initially spherical shapes of particles provide excellent strain markers. Experiments were run at a variety of temperatures, strain rates and stresses resulting in end products with varying degrees of total strain. The nature of strain partitioning and accumulation are evaluated using image analysis techniques on scanned images and photomicrographs of thin sections cut perpendicular to the loading direction of each experimental product. Shapes of the individual deformed particles (e.g., oblate spheroids) were determined and the Scion image analysis program was used to create a best-fit ellipse for each particle. Statistics collected on each particle include: axial dimension (a), vertical dimension (c) and angle from the horizontal. The data are used to calculate the oblateness of each particle (1-c/a) and the angle of deformation induced foliation. Furthermore, the relative proportions of visible blue epoxy in the sample scans determine bulk porosity. The average oblateness of the particles is a direct, independent measure of the accumulated strain in each sample. Results indicate that these measured values are equal to calculated theoretical values of oblateness for spheroids undergoing the

  11. Dark field electron holography for strain measurement.

    PubMed

    Béché, A; Rouvière, J L; Barnes, J P; Cooper, D

    2011-02-01

    Dark field electron holography is a new TEM-based technique for measuring strain with nanometer scale resolution. Here we present the procedure to align a transmission electron microscope and obtain dark field holograms as well as the theoretical background necessary to reconstruct strain maps from holograms. A series of experimental parameters such as biprism voltage, sample thickness, exposure time, tilt angle and choice of diffracted beam are then investigated on a silicon-germanium layer epitaxially embedded in a silicon matrix in order to obtain optimal dark field holograms over a large field of view with good spatial resolution and strain sensitivity. PMID:21333860

  12. Biological characterization of Trypanosoma cruzi strains.

    PubMed

    Martínez-Díaz, R A; Escario, J A; Nogal-Ruiz, J J; Gómez-Barrio, A

    2001-01-01

    Biological parameters of five Trypanosoma cruzi strains from different sources were determined in order to know the laboratory behaviour of natural populations. The parameters evaluated were growth kinetics of epimastigotes, differentiation into metacyclic forms, infectivity in mammalian cells grown in vitro and parasite susceptibility to nifurtimox, benznidazole and gentian violet. Differences in transformation to metacyclic, in the percentage of infected cells as well as in the number of amastigotes per cell were observed among the strains. Regarding to pharmacological assays, Y strain was the most sensitive to the three assayed compounds. These data demonstrate the heterogeneity of natural populations of T. cruzi, the only responsible of infection in humans. PMID:11285475

  13. Electrical measurements as stress-strain monitors

    USGS Publications Warehouse

    Madden, T. R.

    1979-01-01

    Many of the measurements of phyiscal properties being made in earthquake prediction studies are based on the premise that these properties are influenced by stresses and strains, especially so near the failure point. Electrical properties of rocks are controlled by the fluid in the pores and cracks in the rocks. Because these regions are most influenced by stresses, one should expect electrical measurements to be sensitive measures of changing stresses and strains. Nevertheless, the strain changes we are dealing with are very small, and, consequently, we need very sensitive instruments to detect them.  

  14. Freeze-drying Various Strains of Shigella

    PubMed Central

    Berman, Sanford; Altieri, Patricia L.; Groffinger, Albert; Lowenthal, Joseph P.; Formal, Samuel B.

    1968-01-01

    Of six candidate strains of Shigella prepared in Brain Heart Infusion broth as freeze-dried vaccine, low survival rates were obtained with two of the most promising strains. Survival rates with these two strains were increased to acceptable levels when the organisms were suspended in a medium consisting of 8.2% sucrose, 0.01 M phosphate, 0.07% monosodium glutamate, and 2.5% human serum albumin. Alteration of the freezing temperature did not improve the recovery rates significantly. PMID:5726151

  15. Transport in Strained Graphene at Low Temperatures

    NASA Astrophysics Data System (ADS)

    Aguilera-Servin, Juan; Nosek, Adrian; Pan, Cheng; Bockrath, Marc

    2015-03-01

    Strain in graphene layers produces synthetic gauge fields that may be used to modify the properties of its electron system. We study single layers of graphene transferred over Ti/Au electrical contacts on oxidized Si wafers with etched triangular holes in the oxide. The layers are strained by applying pressure electrostatically using a gate voltage and hydrostatically using an external inert gas. We investigate electronic transport in this suspended variable-strain graphene system at low temperatures. We will discuss our latest results.

  16. Strain gage balances and buffet gages

    NASA Technical Reports Server (NTRS)

    Ferris, A. T.

    1983-01-01

    One-piece strain gage force balances were developed for use in the National Transonic Facility (NTF). This was accomplished by studying the effects of the cryogenic environment on materials, strain gages, cements, solders, and moisture proofing agents, and selecting those that minimized strain gage output changes due to temperature. In addition, because of the higher loads that may be imposed by the NTF, these balances are designed to carry a larger load for a given diameter than conventional balances. Full cryogenic calibrations were accomplished, and wind tunnel results that were obtained from the Langley 0-3-Meter Transonic Cryogenic Tunnel were used to verify laboratory test results.

  17. Strain Determination Using Electron Backscatter Diffraction

    SciTech Connect

    Krause, M.; Graff, A.; Altmann, F.

    2010-11-24

    In the present paper we demonstrate the use of electron backscatter diffraction (EBSD) for high resolution elastic strain determination. Here, we focus on analysis methods based on determination of small shifts in EBSD pattern with respect to a reference pattern using cross-correlation algorithms. Additionally we highlight the excellent spatial and depth resolution of EBSD and introduce the use of simulated diffraction patterns based on dynamical diffraction theory for sensitivity estimation. Moreover the potential of EBSD for strain analysis of strained thin films with particular emphasis on appropriate target preparation which respect to occurring lattice defects is demonstrated.

  18. A study of the effect of apparent strain on thermal stress measurement for two types of elevated temperature strain gages

    NASA Technical Reports Server (NTRS)

    Jenkins, J. M.

    1983-01-01

    A weldable type strain gage was used to measure low level thermal stress in an elevated temperature environment. Foil strain gages used in a comparative manner reveal that the apparent strain of weldable strain gages is not sufficiently known to acquire accurate low level thermal stress data. Apparent strain data acquired from coupon tests reveals a large scatter in apparent strain characteristics among the weldable strain gages. It is concluded that apparent strain data for individual weldable strain gages must be required prior to installation if valid thermal stress data is to be obtained through the temperature range of room temperature to 755 K (900 F).

  19. 40 CFR 180.1209 - Bacillus subtilis strain QST 713 and strain QST 713 variant soil; exemption from the requirement...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... strain QST 713 variant soil; exemption from the requirement of a tolerance. 180.1209 Section 180.1209... strain QST 713 and strain QST 713 variant soil; exemption from the requirement of a tolerance. An... Bacillus subtilis strain QST 713 and strain QST 713 variant soil when used in or on all food commodities....

  20. 40 CFR 180.1209 - Bacillus subtilis strain QST 713 and strain QST 713 variant soil; exemption from the requirement...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... strain QST 713 variant soil; exemption from the requirement of a tolerance. 180.1209 Section 180.1209... strain QST 713 and strain QST 713 variant soil; exemption from the requirement of a tolerance. An... Bacillus subtilis strain QST 713 and strain QST 713 variant soil when used in or on all food commodities....

  1. A new radial strain and strain rate estimation method using autocorrelation for carotid artery

    NASA Astrophysics Data System (ADS)

    Ye, Jihui; Kim, Hoonmin; Park, Jongho; Yeo, Sunmi; Shim, Hwan; Lim, Hyungjoon; Yoo, Yangmo

    2014-03-01

    Atherosclerosis is a leading cause of cardiovascular disease. The early diagnosis of atherosclerosis is of clinical interest since it can prevent any adverse effects of atherosclerotic vascular diseases. In this paper, a new carotid artery radial strain estimation method based on autocorrelation is presented. In the proposed method, the strain is first estimated by the autocorrelation of two complex signals from the consecutive frames. Then, the angular phase from autocorrelation is converted to strain and strain rate and they are analyzed over time. In addition, a 2D strain image over region of interest in a carotid artery can be displayed. To evaluate the feasibility of the proposed radial strain estimation method, radiofrequency (RF) data of 408 frames in the carotid artery of a volunteer were acquired by a commercial ultrasound system equipped with a research package (V10, Samsung Medison, Korea) by using a L5-13IS linear array transducer. From in vivo carotid artery data, the mean strain estimate was -0.1372 while its minimum and maximum values were -2.961 and 0.909, respectively. Moreover, the overall strain estimates are highly correlated with the reconstructed M-mode trace. Similar results were obtained from the estimation of the strain rate change over time. These results indicate that the proposed carotid artery radial strain estimation method is useful for assessing the arterial wall's stiffness noninvasively without increasing the computational complexity.

  2. Tropical Strains of Ralstonia solanacearum Outcompete Race 3 Biovar 2 Strains at Lowland Tropical Temperatures

    PubMed Central

    Huerta, Alejandra I.; Milling, Annett

    2015-01-01

    Bacterial wilt, caused by members of the heterogenous Ralstonia solanacearum species complex, is an economically important vascular disease affecting many crops. Human activity has widely disseminated R. solanacearum strains, increasing their global agricultural impact. However, tropical highland race 3 biovar 2 (R3bv2) strains do not cause disease in tropical lowlands, even though they are virulent at warm temperatures. We tested the hypothesis that differences in temperature adaptation and competitive fitness explain the uneven geographic distribution of R. solanacearum strains. Using three phylogenetically and ecologically distinct strains, we measured competitive fitness at two temperatures following paired-strain inoculations of their shared host, tomato. Lowland tropical strain GMI1000 was only weakly virulent on tomato under temperate conditions (24°C for day and 19°C for night [24/19°C]), but highland tropical R3bv2 strain UW551 and U.S. warm temperate strain K60 were highly virulent at both 24/19°C and 28°C. Strain K60 was significantly more competitive than both GMI1000 and UW551 in tomato rhizospheres and stems at 28°C, and GMI1000 also outcompeted UW551 at 28°C. The results were reversed at cooler temperatures, at which highland strain UW551 generally outcompeted GMI1000 and K60 in planta. The superior competitive index of UW551 at 24/19°C suggests that adaptation to cool temperatures could explain why only R3bv2 strains threaten highland agriculture. Strains K60 and GMI1000 each produced different bacteriocins that inhibited growth of UW551 in culture. Such interstrain inhibition could explain why R3bv2 strains do not cause disease in tropical lowlands. PMID:25769835

  3. Survival of Bacillus megaterium strains in water.

    PubMed

    Palmada, F M; Sanchez-Rivas, C

    1996-01-01

    Cultures of Bacillus megaterium strains, producers or not of poly-beta-hydroxy-butyrate (PHB+ and PHB-) were submitted to several shift-downs: nutritional (one hundred fold dilution in saline water S or artificial fresh water ADA) or nutritional and osmotic (one hundred fold dilution in water or W). In all conditions tested, the wild type strain survived, duplicated five times and sporulated. However, the PHB- mutant strain showed a drastic loss of viability in water (< 0.1%) not observed when the shift was only nutritional (S or ADA). Discussion was focused on the advantages of the potential use of Bacillus megaterium as host for delivering bio-insecticides in waters instead of natural hosts such as B. thuringiensis strains. PMID:9017852

  4. Method of transferring strained semiconductor structure

    DOEpatents

    Nastasi, Michael A.; Shao, Lin

    2009-12-29

    The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants is formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate to the other substrate. The multilayer structure includes at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be optionally etched away after the layer transfer.

  5. Strain Gauges Mounted To Retain Calibration

    NASA Technical Reports Server (NTRS)

    Butler, Barry L.

    1993-01-01

    Silicon-based semiconductor strain gauges mounted in such way they retain original calibration for several years instead of few months. Improvement effected by bonding gauges to ceramic substrates with glasses instead of epoxies as adhesives.

  6. Thin film strain gage development program

    NASA Technical Reports Server (NTRS)

    Grant, H. P.; Przybyszewski, J. S.; Anderson, W. L.; Claing, R. G.

    1983-01-01

    Sputtered thin-film dynamic strain gages of 2 millimeter (0.08 in) gage length and 10 micrometer (0.0004 in) thickness were fabricated on turbojet engine blades and tested in a simulated compressor environment. Four designs were developed, two for service to 600 K (600 F) and two for service to 900 K (1200 F). The program included a detailed study of guidelines for formulating strain-gage alloys to achieve superior dynamic and static gage performance. The tests included gage factor, fatigue, temperature cycling, spin to 100,000 G, and erosion. Since the installations are 30 times thinner than conventional wire strain gage installations, and any alteration of the aerodynamic, thermal, or structural performance of the blade is correspondingly reduced, dynamic strain measurement accuracy higher than that attained with conventional gages is expected. The low profile and good adherence of the thin film elements is expected to result in improved durability over conventional gage elements in engine tests.

  7. Strain field of a buried oxide aperture

    NASA Astrophysics Data System (ADS)

    Kießling, F.; Niermann, T.; Lehmann, M.; Schulze, J.-H.; Strittmatter, A.; Schliwa, A.; Pohl, U. W.

    2015-02-01

    The strain field of an AlOx current aperture, fabricated by selective oxidation of an AlAs/GaAs layer buried in a circular GaAs mesa, is studied. Components of the strain tensor for a thin cross-section lamella cut out of such a structure are evaluated from dark-field electron holography, proving the validity of simulations based on linear elasticity. Simulation of the entire structure is utilized to prepare mesa surfaces with tailored strain fields for controlling the nucleation site of InGaAs quantum dots. The experimental proof of strain simulations allows estimating the magnitude of piezoelectricity, yielding for the studied mesa structures a piezoelectric potential up to 50 mV.

  8. Can a strain yield a qubit?

    NASA Astrophysics Data System (ADS)

    Benjamin, Colin

    2015-03-01

    A Josepshon qubit is designed via the application of a tensile strain to a topological insulator surface, sandwiched between two s-wave superconductors. The strain applied leads to a shift in Dirac point without changing the conducting states existing on the surface of a topological insulator. This strain applied can be tuned to form a π-junction in such a structure. Combining two such junctions in a ring architecture leads to the ground state of the ring being in a doubly degenerate state- ``0'' and ``1'' states of the qubit. A qubit designed this way is easily controlled via the tunable strain. We report on the conditions necessary to design such a qubit. Finally the operating time of a single qubit phase gate is derived. This work was supported by funds from Dept. of Science and Technology (Nanomission), Govt. of India, Grant No. SR/NM/NS-1101/2011.

  9. Design parameters for borehole strain instrumentation

    NASA Astrophysics Data System (ADS)

    Gladwin, Michael T.; Hart, Rhodes

    1985-01-01

    The response of a borehole strain meter to hydrostatic and shear deformations in an isotropic medium is calculated to facilitate optimum instrument design and produce instrument response factors for parameters typically encountered in installed instruments. Results for an empty borehole are first compared with results for an instrument in intimate contact with the surrounding rock. The effects of the grout used to install the instrument are then examined. Where possible, analytic forms for the response factors are given. Results for typical installations are then presented in graphical form for optimizing instrument design in an environment of known elastic parameters. Alternatively, the results may be applied in the measurement of unknown strain signals, to correct for instrument response or to provide in-situ estimates of the elastic properties of the environment by examination of observed strain response to known strain signals.

  10. Broken Bones, Sprains, and Strains (For Parents)

    MedlinePlus

    ... 5 Things to Know About Zika & Pregnancy Broken Bones, Sprains, and Strains KidsHealth > For Parents > Broken Bones, ... home. What to Do: For a Suspected Broken Bone: Do not move a child whose injury involves ...

  11. Dynamic Force Measurement with Strain Gauges

    ERIC Educational Resources Information Center

    Lee, Bruce E.

    1974-01-01

    Discusses the use of four strain gauges, a Wheatstone bridge, and an oscilloscope to measure forces dynamically. Included is an example of determining the centripetal force of a pendulum in a general physics laboratory. (CC)

  12. Clostridium thermosaccharolyticum strain deficient in acetate production

    SciTech Connect

    Rothstein, D.M.

    1986-01-01

    A mutant of Clostridium thermosaccharolyticum that is blocked in acetate production was isolated after treatment with nitrosoguanidine and selection for fluoroacetate resistance. The mutant produced more ethanol than the parent strain did.

  13. High Strain Rate Rheology of Polymer Melts

    NASA Astrophysics Data System (ADS)

    Kelly, Adrian; Gough, Tim; Whiteside, Ben; Coates, Phil D.

    2009-07-01

    A modified servo electric injection moulding machine has been used in air-shot mode with capillary dies fitted at the nozzle to examine the rheology of a number of commercial polymers at wall shear strain rates of up to 107 s-1. Shear and extensional flow properties were obtained through the use of long and orifice (close to zero land length) dies of the same diameter. A range of polyethylene, polypropylene and polystyrene melts have been characterized; good agreement was found between the three techniques used in the ranges where strain rates overlapped. Shear viscosity of the polymers studied was found to exhibit a plateau above approximately 1×106 s-1. A relationship between the measured high strain rate rheological behaviour and molecular structure was noted, with polymers containing larger side groups reaching the rate independent plateau at lower strain rates than those with simpler structures.

  14. Strained Hydrocarbons as Potential Hypergolic Fuels

    NASA Technical Reports Server (NTRS)

    2005-01-01

    A storable combination of high-energy hypergolic fuel and oxidizer is advantageous to the future of reusable launch vehicles (RLVs). The combination will allow an increase in energy per unit volume of fuel and eliminate the need for an external ignition system. Strained systems have been studied as potential high-density fuels. Adding hypergolic functional groups, such as amino groups, to these hydrocarbons will potentially allow auto ignition of strained systems with hydrogen peroxide. Several straight chain amines and their strained counterparts containing an equivalent number of carbon atoms have been purchased and synthesized. These amines provide initial studies to determine the effects of fuel vapor pressure, strain energy, fuel miscibility, and amine substitution upon fuel ignition time and hypergolicity with hydrogen peroxide as an oxidizer.

  15. Strain accumulation along the Cascadia Subduction Zone

    NASA Astrophysics Data System (ADS)

    Murray, Mark H.; Lisowski, Michael

    2000-11-01

    We combine triangulation, trilateration, and GPS observations to determine horizontal strain rates along the Cascadia subduction zone from Cape Mendocino to the Strait of Juan de Fuca. Shear-strain rates are significantly greater than zero (95% confidence) in all forearc regions (26-167 nanoradians/yr), and are not significant in the arc and backarc regions. The deformation is primarily uniaxial contraction nearly parallel to Juan de Fuca-North America plate convergence (N55°-80°E). The strain rates are consistent with an elastic dislocation model for interseismic slip with a shallow 100-km wide locked zone and a deeper 75-km transition zone along the entire megathrust, except along the central Oregon coast where relatively lower strain rates are consistent with 30-40 km wide locked and transition zones.

  16. Tuning strain in flexible graphene nanoelectromechanical resonators

    NASA Astrophysics Data System (ADS)

    Guan, Fen; Kumaravadivel, Piranavan; Averin, Dmitri V.; Du, Xu

    2015-11-01

    The structural flexibility of low dimensional nanomaterials offers unique opportunities for studying the impact of strain on their physical properties and for developing innovative devices utilizing strain engineering. A key towards such goals is a device platform which allows the independent tuning and reliable calibration of the strain. Here, we report the fabrication and characterization of graphene nanoelectromechanical resonators (GNEMRs) on flexible substrates. Combining substrate bending and electrostatic gating, we achieve the independent tuning of the strain and sagging in graphene and explore the nonlinear dynamics over a wide parameter space. Analytical and numerical studies of a continuum mechanics model, including the competing higher order nonlinear terms, reveal a comprehensive nonlinear dynamics phase diagram, which quantitatively explains the complex behaviors of GNEMRs.

  17. Measuring strain distributions in amorphous materials

    NASA Astrophysics Data System (ADS)

    Poulsen, Henning F.; Wert, John A.; Neuefeind, Jörg; Honkimäki, Veijo; Daymond, Mark

    2005-01-01

    A number of properties of amorphous materials including fatigue, fracture and component performance are governed by the magnitude of strain fields around inhomogeneities such as inclusions, voids and cracks. At present, localized strain information is only available from surface probes such as optical or electron microscopy. This is unfortunate because surface and bulk characteristics in general differ. Hence, to a large extent, the assessment of strain distributions relies on untested models. Here we present a universal diffraction method for characterizing bulk stress and strain fields in amorphous materials and demonstrate its efficacy by work on a material of current interest in materials engineering: a bulk metallic glass. The macroscopic response is shown to be less stiff than the atomic next-neighbour bonds because of structural rearrangements at the scale of 4-10 Å. The method is also applicable to composites comprising an amorphous matrix and crystalline inclusions.

  18. Silicon ribbon stress-strain activities

    NASA Technical Reports Server (NTRS)

    Wada, B. K.; Shih, C. F.; Kuo, C. P.; Phillips, W. M.

    1984-01-01

    The finite element method is used to investigate stress/strain in silicon ribbon. Failure considerations such as residual stress, buckling material non-linearity and creep are discussed. Temperature profiles are presented.

  19. [Improvement of Trichoderma strains for biocontrol].

    PubMed

    Benítez, T; Rey, M; Delgado-Jarana, J; Rincón, A M; Limón, M C

    2000-03-01

    The use of the fungal genus Trichoderma to control fungal plant diseases is a promising alternative to the use of chemical compounds. The aim of this work has been to obtain Trichoderma strains with improved capacity as biological control agents. To do so, the hydrolytic capacity on fungal cell walls of strains of the fungus Trichoderma harzianum has been increased. On one hand, transformation experiments with genes which coded for chitinases and glucanases have been carried out in T. harzianumstra ins. On the other hand, the medium composition has also been modified in order to eliminate proteolytic degradation of some of the overproduced enzymes. Finally, hybrid chitinolytic enzymes with substrate-binding domains have been produced as an alternative to obtain improved biocontrol strains. The transformant strains, when compared with the wild type, showed improved antifungal capacity against the phytopathogenic fungus Rhizoctonia solani, in in vitro experiments. PMID:15762779

  20. Heat strain during explosive ordnance disposal.

    PubMed

    Stewart, Ian B; Rojek, Amanda M; Hunt, Andrew P

    2011-08-01

    Bomb technicians perform their work while encapsulated in explosive ordnance disposal suits. Designed primarily for safety, these suits have an unintended consequence of impairing the body's natural mechanisms for heat dissipation. Consequently, bomb technicians are known to experience symptoms of heat illness while performing their work. This research provides the first field based analysis of heat strain in bomb technicians. Six participants undertook simulated operational tasks across 2 days of variable climate. All subjects demonstrated high levels of heat strain as evidenced by elevated heart rate, core body temperature, and physiological strain index. Participants also reported signs and symptoms associated with heat illness. These results were exacerbated by more intense physical activity despite being undertaken in a cooler environment. The universal experience of heat strain in this sample has significant implications for the health of bomb technicians and additional research examining methods to improve temperature regulation and performance is warranted. PMID:21882791

  1. Geometric reconstruction using tracked ultrasound strain imaging

    NASA Astrophysics Data System (ADS)

    Pheiffer, Thomas S.; Simpson, Amber L.; Ondrake, Janet E.; Miga, Michael I.

    2013-03-01

    The accurate identification of tumor margins during neurosurgery is a primary concern for the surgeon in order to maximize resection of malignant tissue while preserving normal function. The use of preoperative imaging for guidance is standard of care, but tumor margins are not always clear even when contrast agents are used, and so margins are often determined intraoperatively by visual and tactile feedback. Ultrasound strain imaging creates a quantitative representation of tissue stiffness which can be used in real-time. The information offered by strain imaging can be placed within a conventional image-guidance workflow by tracking the ultrasound probe and calibrating the image plane, which facilitates interpretation of the data by placing it within a common coordinate space with preoperative imaging. Tumor geometry in strain imaging is then directly comparable to the geometry in preoperative imaging. This paper presents a tracked ultrasound strain imaging system capable of co-registering with preoperative tomograms and also of reconstructing a 3D surface using the border of the strain lesion. In a preliminary study using four phantoms with subsurface tumors, tracked strain imaging was registered to preoperative image volumes and then tumor surfaces were reconstructed using contours extracted from strain image slices. The volumes of the phantom tumors reconstructed from tracked strain imaging were approximately between 1.5 to 2.4 cm3, which was similar to the CT volumes of 1.0 to 2.3 cm3. Future work will be done to robustly characterize the reconstruction accuracy of the system.

  2. High Temperature Strain Gage Calibration Fixture

    NASA Technical Reports Server (NTRS)

    Vranas, T. (Inventor)

    1976-01-01

    An apparatus and method are described for calibrating high temperature strain gases which serve for both dead weight and constant deflection measurements. A cantilever support arm allows the test unit to slide into a furnace while one end is subjected to bending strain either by hanging weights upon it or by deflecting it with a push rod. The dual nature of the fixture permits both tests to be run without change of the test specimen or removal from the furnace.

  3. High-Temperature Adhesive Strain Gage Developed

    NASA Technical Reports Server (NTRS)

    Pereira, J. Michael; Roberts, Gary D.

    1997-01-01

    Researchers at the NASA Lewis Research Center have developed a unique strain gage and adhesive system for measuring the mechanical properties of polymers and polymer composites at elevated temperatures. This system overcomes some of the problems encountered in using commercial strain gages and adhesives. For example, typical commercial strain gage adhesives require a postcure at temperatures substantially higher than the maximum test temperature. The exposure of the specimen to this temperature may affect subsequent results, and in some cases may be higher than the glass-transition temperature of the polymer. In addition, although typical commercial strain gages can be used for short times at temperatures up to 370 C, their long-term use is limited to 230 C. This precludes their use for testing some high-temperature polyimides near their maximum temperature capability. Lewis' strain gage and adhesive system consists of a nonencapsulated, unbacked gage grid that is bonded directly to the polymer after the specimen has been cured but prior to the normal postcure cycle. The gage is applied with an adhesive specially formulated to cure under the specimen postcure conditions. Special handling, mounting, and electrical connection procedures were developed, and a fixture was designed to calibrate each strain gage after it was applied to a specimen. A variety of tests was conducted to determine the performance characteristics of the gages at elevated temperatures on PMR-15 neat resin and titanium specimens. For these tests, which included static tension, thermal exposure, and creep tests, the gage and adhesive system performed within normal strain gage specifications at 315 C. An example of the performance characteristics of the gage can be seen in the figure, which compares the strain gage measurement on a polyimide specimen at 315 C with an extensometer measurement.

  4. Strain limit criteria to predict failure

    SciTech Connect

    Flanders, H.E.

    1995-12-31

    In recent years extensive effort has been expended to qualify existing structures for conditions that are beyond the original design basis. Determination of the component failure load is useful for this type of evaluation. This paper presents criteria based upon strain limits to predict the load at failure. The failure modes addressed are excessive plastic deformations, localized plastic strains, and structural instability. The effects of analytical method sophistication, as built configurations, material properties degradation, and stress state are addressed by the criteria.

  5. The Development of Electrical Strain Gages

    NASA Technical Reports Server (NTRS)

    De Forest, A V; Leaderman, H

    1940-01-01

    The design, construction, and properties of an electrical-resistance strain gage consisting of fine wires molded in a laminated plastic are described. The properties of such gages are discussed and also the problems of molding of wires in plastic materials, temperature compensation, and cementing and removal of the gages. Further work to be carried out on the strain gage, together with instrument problems, is discussed.

  6. [Consumption of hydrocarbons by psychrotolerant degrader strains].

    PubMed

    Andeeva, I S; Emel'ianova, E K; Ol'kin, S E; Reznikova, I K; Zagrebel'nyĭ, S N; Repin, V E

    2007-01-01

    Oil-oxidizing microorganisms have been sampled in various regions of Siberia and used in strain associations, which degrade n-alkanes of oil from various fields by 64-92% after 6 days of growth in a wide temperature range. These strains are salt-tolerant and psychrotolerant. They are compatible with aboriginal soil microflora. Promising results have been obtained in experiments on growing plants on oil-polluted soil purified with a biodegrader of this series. PMID:17476811

  7. Hydraulic Calibrator for Strain-Gauge Balances

    NASA Technical Reports Server (NTRS)

    Skelly, Kenneth; Ballard, John

    1987-01-01

    Instrument for calibrating strain-gauge balances uses hydraulic actuators and load cells. Eliminates effects of nonparallelism, nonperpendicularity, and changes of cable directions upon vector sums of applied forces. Errors due to cable stretching, pulley friction, and weight inaccuracy also eliminated. New instrument rugged and transportable. Set up quickly. Developed to apply known loads to wind-tunnel models with encapsulated strain-gauge balances, also adapted for use in calibrating dynamometers, load sensors on machinery and laboratory instruments.

  8. Load cell having strain gauges of arbitrary location

    DOEpatents

    Spletzer, Barry

    2007-03-13

    A load cell utilizes a plurality of strain gauges mounted upon the load cell body such that there are six independent load-strain relations. Load is determined by applying the inverse of a load-strain sensitivity matrix to a measured strain vector. The sensitivity matrix is determined by performing a multivariate regression technique on a set of known loads correlated to the resulting strains. Temperature compensation is achieved by configuring the strain gauges as co-located orthogonal pairs.

  9. Strain-tunable Josephson current in graphene-superconductor junction

    NASA Astrophysics Data System (ADS)

    Wang, Y.; Liu, Y.; Wang, B.

    2013-10-01

    Strain effects on Josephson current in a graphene-superconductor junction are explored theoretically. It is demonstrated that the supercurrent is an oscillatory function of zigzag direction strain with a strain-dependent oscillating frequency. Interestingly, it is found that the Josephson current under armchair direction strain can be turned on/off with a cutoff strain. In view of the on/off properties of the Josephson current, we propose the strained graphene Josephson junction to be utilized as a supercurrent switch.

  10. A closer look at prion strains

    PubMed Central

    Solforosi, Laura; Milani, Michela; Mancini, Nicasio; Clementi, Massimo; Burioni, Roberto

    2013-01-01

    Prions are infectious proteins that are responsible for transmissible spongiform encephalopathies (TSEs) and consist primarily of scrapie prion protein (PrPSc), a pathogenic isoform of the host-encoded cellular prion protein (PrPC). The absence of nucleic acids as essential components of the infectious prions is the most striking feature associated to these diseases. Additionally, different prion strains have been isolated from animal diseases despite the lack of DNA or RNA molecules. Mounting evidence suggests that prion-strain-specific features segregate with different PrPSc conformational and aggregation states. Strains are of practical relevance in prion diseases as they can drastically differ in many aspects, such as incubation period, PrPSc biochemical profile (e.g., electrophoretic mobility and glycoform ratio) and distribution of brain lesions. Importantly, such different features are maintained after inoculation of a prion strain into genetically identical hosts and are relatively stable across serial passages. This review focuses on the characterization of prion strains and on the wide range of important implications that the study of prion strains involves. PMID:23357828

  11. A high-strain-rate superplastic ceramic.

    PubMed

    Kim, B N; Hiraga, K; Morita, K; Sakka, Y

    2001-09-20

    High-strain-rate superplasticity describes the ability of a material to sustain large plastic deformation in tension at high strain rates of the order of 10-2 to 10-1 s-1 and is of great technological interest for the shape-forming of engineering materials. High-strain-rate superplasticity has been observed in aluminium-based and magnesium-based alloys. But for ceramic materials, superplastic deformation has been restricted to low strain rates of the order of 10-5 to 10-4 s-1 for most oxides and nitrides with the presence of intergranular cavities leading to premature failure. Here we show that a composite ceramic material consisting of tetragonal zirconium oxide, magnesium aluminate spinel and alpha-alumina phases exhibits superplasticity at strain rates up to 1 s-1. The composite also exhibits a large tensile elongation, exceeding 1,050 per cent for a strain rate of 0.4 s-1. The tensile flow behaviour and deformed microstructure of the material indicate that superplasticity is due to a combination of limited grain growth in the constitutive phases and the intervention of dislocation-induced plasticity in the zirconium oxide phase. We suggest that the present results hold promise for the application of shape-forming technologies to ceramic materials. PMID:11565026

  12. Fermentation studies using Saccharomyces diastaticus yeast strains

    SciTech Connect

    Erratt, J.A.; Stewart, G.G.

    1981-01-01

    The yeast species, Saccharomyces diastaticus, has the ability to ferment starch and dextrin, because of the extracellular enzyme, glucoamylase, which hydrolyzes the starch/dextrin to glucose. A number of nonallelic genes--DEX 1, DEX 2, and dextrinase B which is allelic to STA 3--have been isolated, which impart to the yeast the ability to ferment dextrin. Various diploid yeast strains were constructed, each being either heterozygous or homozygous for the individual dextrinase genes. Using 12 (sup 0) plato hopped wort (30% corn adjunct) under agitated conditions, the fermentation rates of the various diploid yeast strains were monitored. A gene-dosage effect was exhibited by yeast strains containing DEX 1 or DEX 2, however, not with yeast strains containing dextrinase B (STA 3). The fermentation and growth rates and extents were determined under static conditions at 14.4 C and 21 C. With all yeast strains containing the dextrinase genes, both fermentation and growth were increased at the higher incubation temperature. Using 30-liter fermentors, beer was produced with the various yeast strains containing the dextrinase genes and the physical and organoleptic characteristics of the products were determined. The concentration of glucose in the beer was found to increase during a 3-mo storage period at 21 C, indicating that the glucoamylase from Saccharomyces diastaticus is not inactivated by pasteurization. (Refs. 36).

  13. Strain Tuning of Ferroelectric Thin Films *

    NASA Astrophysics Data System (ADS)

    Schlom, Darrell G.; Chen, Long-Qing; Eom, Chang-Beom; Rabe, Karin M.; Streiffer, Stephen K.; Triscone, Jean-Marc

    2007-08-01

    Predictions and measurements of the effect of biaxial strain on the properties of epitaxial ferroelectric thin films and superlattices are reviewed. Results for single-layer ferroelectric films of biaxially strained SrTiO3, BaTiO3, and PbTiO3 as well as PbTiO3/SrTiO3 and BaTiO3/SrTiO3 superlattices are described. Theoretical approaches, including first principles, thermodynamic analysis, and phase-field models, are applied to these biaxially strained materials, the assumptions and limitations of each technique are explained, and the predictions are compared. Measurements of the effect of biaxial strain on the paraelectric-to-ferroelectric transition temperature (TC) are shown, demonstrating the ability of percent-level strains to shift TC by hundreds of degrees in agreement with the predictions that predated such experiments. Along the way, important experimental techniques for characterizing the properties of strained ferroelectric thin films and superlattices, as well as appropriate substrates on which to grow them, are mentioned.

  14. Fiber optic strain monitoring for pipelines

    SciTech Connect

    Berthold, J.W.

    1998-04-08

    The objective of this project was to demonstrate the feasibility of using fiber optic Bragg grating sensors (BGS) to measure axial and bending strain in pipes. Work was performed by McDermott Technology Inc. (MTI) and included BGS design and procurement. In addition to the pipe strain testing, a number of BGS evaluations were performed. Several methods were evaluated to protect and encapsulate the BGS, which are embedded inside an optical fiber, and strain transfer tests were performed on two of the encapsulation approaches. A high strain bending test to failure was performed on one BGS. A special test section was used to characterize the performance of the BGS and compare to standard electrical resistance foil strain gages. Two sets of pipe strain tests were performed. In the first test series, optical fiber was positioned along the pipe test section and embedded BGS were attached directly to the outside of the pipe wall. In the second tests series, the BGS were encapsulated inside a stainless steel tube which was attached to the outside of the pipe wall. All the tests were successfully completed, the data analyzed, and the results summarized in this report.

  15. [Screening of strain producing extracellular penicillin acylase].

    PubMed

    Wang, Z; Han, W; Men, D; Wang, Q

    1992-04-01

    Ninety-eight strains having extracellular penicillin acylase activity were derived from soil samples by colour-developing method. 10 strains of them possess higher activity of penicillin acylase. All of those are found to be Bacillus megaterium. The optimum condition of enzyme production was investigated with the strain No. 46 which is from No. 247 by single colony isolation. The productivity of penicillin acylase in the optimum condition have been enhanced 2.5 times more than that in the screening condition. The mutant strain, Bacillus megaterium UL-81, which penicillin acylase activity reached the level of 723u/100ml of broth was obtained from No. 46 by treatment with physical and chemical factors. The penicillin acylase activity of UL-81 can reach 820u/100 ml in 500L fermentor. The mutant strain differed from parent strain in the morphology of colony, the size of cells, the effect of concentration and the addition time of phenylacetic acid on the production of penicillin acylase. PMID:1598760

  16. Strain-displacement relations for strain engineering in single-layer 2d materials

    NASA Astrophysics Data System (ADS)

    Midtvedt, Daniel; Lewenkopf, Caio H.; Croy, Alexander

    2016-03-01

    We investigate the electromechanical coupling in single-layer 2d materials. For non-Bravais lattices, we find important corrections to the standard macroscopic strain-microscopic atomic-displacement theory. We put forward a general and systematic approach to calculate strain-displacement relations for several classes of 2d materials. We apply our findings to graphene as a study case, by combining a tight binding and a valence force-field model to calculate electronic and mechanical properties of graphene nanoribbons under strain. The results show good agreement with the predictions of the Dirac equation coupled to continuum mechanics. For this long wave-limit effective theory, we find that the strain-displacement relations lead to a renormalization correction to the strain-induced pseudo-magnetic fields. A similar renormalization is found for the strain-induced band-gap of black phosphorous. Implications for nanomechanical properties and electromechanical coupling in 2d materials are discussed.

  17. Internal elastic strains in an IF steel following changes in strain path

    SciTech Connect

    Wilson, D.V.; Bate, P.S.

    1996-08-01

    Residual elastic strains present in an IF steel following rolling and subsequent tensile deformation have been evaluated using X-ray diffraction. It was possible to decompose diffraction profiles into two symmetrical components notionally corresponding to dislocation walls and cell interiors and so estimate the volume fractions and mean elastic strains associated with these components of the microstructure following different deformation modes. The residual long range elastic strains were very small following rolling, but they were much greater following subsequent tensile elongation to macroscopic yield. The mean strains could only account for about one-third of the strain induced anisotropy of flow stress. It is concluded that insufficient dislocations accumulate at cell walls at macroscopic yield following a path change to give homogeneous loading of the dislocation walls, and that this effect can account for the difference between the macroscopic mechanical behavior and predictions from the X-ray strain measurements.

  18. Strain rate change tests with the Split Hopkinson Bar method

    NASA Astrophysics Data System (ADS)

    Isakov, M.; Kokkonen, J.; Östman, K.; Kuokkala, V.-T.

    2016-05-01

    In this paper, methods to produce rapid strain rate changes for strain rate sensitivity measurements in Split Hopkinson Bar arrangements are presented and discussed. Two different cases are considered: a strain rate change test within the high strain rate region in compression, and a tension test incorporating a large strain rate jump directly from the low strain rate region to high strain rates. The former method is based on the loading wave amplitude manipulation, while the latter method is based on the incorporation of a low strain rate loading device into a Tensile Split Hopkinson Bar apparatus.

  19. COMPARISON OF A REFERENCE STRAIN AND FOUR GEOGRAPHICAL STRAINS OF 'ARTEMIA' AS FOOD FOR WINTER FLOUNDER (PSEUDOPLEURONECTES AMERICANUS) LARVAE

    EPA Science Inventory

    A reference strain and four commercially available geographical strains of Artemia nauplii were each tested as a diet for winter flounder (Pseudopleuronectes americanus) larvae. The Reference strain was provided by the Artemia Reference Center, Ghent, Belgium. The geographical st...

  20. Complete Genome Sequence of Rat Cytomegalovirus Strain ALL-03 (Malaysian Strain).

    PubMed

    Balakrishnan, Krishnan Nair; Abdullah, Ashwaq Ahmed; Camalxaman, Siti Nazrina; Quah, Yi Wan; Abba, Yusuf; Hani, Homayoun; Loh, Hwei San; Kamal, Farina Mustaffa; Zeenathul, Nazariah Allaudin; Aini, Ideris; Omar, A R; Noordin, Mohamed Mustapha; Mohd Azmi, Mohd Lila

    2015-01-01

    The complete genome sequence of the ALL-03 strain of rat cytomegalovirus (RCMV) has been determined. The RCMV genome has a length of 197,958 bp and is arranged as a single unique sequence flanked by 504-bp terminal direct repeats. This strain is closely related to the English strain of RCMV in terms of genetic arrangement but differs slightly in size. PMID:26044413

  1. Potential of Lactic Streptococci to Produce Bacteriocin

    PubMed Central

    Geis, Arnold; Singh, Jasjit; Teuber, Michael

    1983-01-01

    A survey was made on the bacteriocin-producing potential of lactic streptococci. Bacteriocin-like activities were isolated and partially purified from about 5% of the 280 strains investigated. The frequency of production varied from about 1% in Streptococcus lactis subsp. diacetylactis to 9 and 7.5% in S. lactis and Streptococcus cremoris, respectively. Eight strains of S. cremoris produced bacteriocins which, on the basis of heat stability at different pH values and inhibitory spectrum, could be divided into four types. From 54 S. lactis strains, 5 strains produced inhibitory substances, namely, three nisin-like antibiotics and two different bacteriocins. Only 1 of 93 S. lactis subsp. diacetylactis strains produced a bacteriocin which was very similar to bacteriocins of type I in S. cremoris. All of the bacteriocins that were partially purified by ammonium sulfate precipitation showed very limited inhibitory spectra. Most of the lactic streptococci and a few members of the genera Clostridium, Leuconostoc, and Pediococcus were inhibited. None of the bacteriocins acted on gram-negative bacteria. The bacteriocinogenic strains were also characterized on the basis of plasmid content. All strains possessed between one and nine plasmids ranging from 1 to 50 megadaltons. Images PMID:16346166

  2. A numerical method for determining the strain rate intensity factor under plane strain conditions

    NASA Astrophysics Data System (ADS)

    Alexandrov, S.; Kuo, C.-Y.; Jeng, Y.-R.

    2016-07-01

    Using the classical model of rigid perfectly plastic solids, the strain rate intensity factor has been previously introduced as the coefficient of the leading singular term in a series expansion of the equivalent strain rate in the vicinity of maximum friction surfaces. Since then, many strain rate intensity factors have been determined by means of analytical and semi-analytical solutions. However, no attempt has been made to develop a numerical method for calculating the strain rate intensity factor. This paper presents such a method for planar flow. The method is based on the theory of characteristics. First, the strain rate intensity factor is derived in characteristic coordinates. Then, a standard numerical slip-line technique is supplemented with a procedure to calculate the strain rate intensity factor. The distribution of the strain rate intensity factor along the friction surface in compression of a layer between two parallel plates is determined. A high accuracy of this numerical solution for the strain rate intensity factor is confirmed by comparison with an analytic solution. It is shown that the distribution of the strain rate intensity factor is in general discontinuous.

  3. Strain analysis and strain path modelling in the Loch Tollie gneisses, Gairloch, NW Scotland

    NASA Astrophysics Data System (ADS)

    Odling, N. E.

    A quantitative structural analysis is presented for the Loch Tullie gneisses of the Lewisian complex outcropping at Gairloch. The gneisses and the dykes they contain are folded into a large antiformal structure known as the Tollic Antiform. Quartz aggregates in quartzo-feldspathic gneisses have been used as finite strain markers in eleven specimens across the antiform. Two models, using rotational strain (simple shear) and irrotational strain (pure shear), are used to reconstruct the strain path. Results show that only the rotational strain model satisfies the strain data and the field evidence, and indicates a steeply northeast (75°) dipping shear plane and moderately northwest (55°) plunging shear direction, with a southwest-side-down sense of shear. A strain profile is constructed for the Tollie gneisses using the model and the attitude of gneissose layering. This shows increasing shear strain to the southwest to a maximum gamma value of approximately 8. The strain profile indicates a horizontal dextral displacement of 4.7 km and a vertical displacement of 6.8 km for the Tollie gneisses. The Tollie Antiform thus lies on the northeast margin of a large-scale shear zone, the main zone of deformation of which can be traced southwestwards some 4 km. Such a shear zone presents a major tectonic boundary within the Lewisian of northwest Scotland.

  4. Stress-Strain Relation and strain-Induced Crystallization in Rubber

    SciTech Connect

    Toki,S.

    2006-01-01

    Rubber is composed of flexible chains and network points. Theory of rubber elasticity succeeds to elucidate stress-strain relation of rubber using the inverse Langevin equation of entropy modulus. However, actual rubber is much different from ideal networks composed of ideal rubber chains. Network points may not distribute homogeneously and the molecular weight between two network points may show wide distribution. Flexible chains show strain-induced crystallization. Recent synchrotron X-ray and simultaneous stress-strain measurements reveal that strain-induced crystallization reduces the stress by increasing the length of molecules along the stretching direction. Also, strain-induced crystals are created not at the middle of the network points, but at the close location to the network points. The hybrid structure of strain-induced crystallites and network points may be stronger than network points alone. Therefore, strain induced crystallization may increase the tensile strength of rubber by two mechanisms, they are, increase of elongation at break and reinforcement of network points. Natural rubber has biotic network points in nature. After vulcanization, the biotic network may contribute the superior toughness of NR, comparing to IR. Carbon filled NR also shows strain induced crystallization. In order to acquire high tensile strength, molecules should have higher flexibility to perform strain induced crystallization by selecting a kind of carbon blacks, an accelerator and a curing condition.

  5. The influence of strain rate and hydrogen on the plane-strain ductility of Zircaloy cladding

    SciTech Connect

    Link, T.M.; Motta, A.T.; Koss, D.A.

    1998-03-01

    The authors studied the ductility of unirradiated Zircaloy-4 cladding under loading conditions prototypical of those found in reactivity-initiated accidents (RIA), i.e.: near plane-strain deformation in the hoop direction (transverse to the cladding axis) at room temperature and 300 C and high strain rates. To conduct these studies, they developed a specimen configuration in which near plane-strain deformation is achieved in the gage section, and a testing methodology that allows one to determine both the limit strain at the onset of localized necking and the fracture strain. The experiments indicate that there is little effect of strain rate (10{sup {minus}3} to 10{sup 2} s{sup {minus}1}) on the ductility of unhydrided Zircaloy tubing deformed under near plane-strain conditions at either room temperature or 300 C. Preliminary experiments on cladding containing 190 ppm hydrogen show only a small loss of fracture strain but no clear effect on limit strain. The experiments also indicate that there is a significant loss of Zircaloy ductility when surface flaws are present in the form of thickness imperfections.

  6. Bone strain magnitude is correlated with bone strain rate in tetrapods: implications for models of mechanotransduction

    PubMed Central

    Aiello, B. R.; Iriarte-Diaz, J.; Blob, R. W.; Butcher, M. T.; Carrano, M. T.; Espinoza, N. R.; Main, R. P.; Ross, C. F.

    2015-01-01

    Hypotheses suggest that structural integrity of vertebrate bones is maintained by controlling bone strain magnitude via adaptive modelling in response to mechanical stimuli. Increased tissue-level strain magnitude and rate have both been identified as potent stimuli leading to increased bone formation. Mechanotransduction models hypothesize that osteocytes sense bone deformation by detecting fluid flow-induced drag in the bone's lacunar–canalicular porosity. This model suggests that the osteocyte's intracellular response depends on fluid-flow rate, a product of bone strain rate and gradient, but does not provide a mechanism for detection of strain magnitude. Such a mechanism is necessary for bone modelling to adapt to loads, because strain magnitude is an important determinant of skeletal fracture. Using strain gauge data from the limb bones of amphibians, reptiles, birds and mammals, we identified strong correlations between strain rate and magnitude across clades employing diverse locomotor styles and degrees of rhythmicity. The breadth of our sample suggests that this pattern is likely to be a common feature of tetrapod bone loading. Moreover, finding that bone strain magnitude is encoded in strain rate at the tissue level is consistent with the hypothesis that it might be encoded in fluid-flow rate at the cellular level, facilitating bone adaptation via mechanotransduction. PMID:26063842

  7. Elastocaloric cooling processes: The influence of material strain and strain rate on efficiency and temperature span

    NASA Astrophysics Data System (ADS)

    Schmidt, Marvin; Schütze, Andreas; Seelecke, Stefan

    2016-06-01

    This paper discusses the influence of material strain and strain rate on efficiency and temperature span of elastocaloric cooling processes. The elastocaloric material, a newly developed quaternary Ni-Ti-Cu-V alloy, is characterized at different maximum strains and strain rates. The experiments are performed with a specially designed test setup, which enables the measurement of mechanical and thermal process parameters. The material efficiency is compared to the efficiency of the Carnot process at equivalent thermal operation conditions. This method allows for a direct comparison of the investigated material with other caloric materials.

  8. Imploding Liner Material Strength Measurements at High-Strain and High Strain Rate

    SciTech Connect

    Bartsch, R.R.; Lee, H.; Holtkamp, D.; Wright, B.; Stokes, J.; Morgan, D.; Anderson, W.; Broste, W.

    1998-10-18

    Imploding, cylindrical liners provide a unique, shockless means of simultaneously accessing high strain and high-strain-rate for measurement of strength of materials in plastic flow. The radial convergence in the liner geometry results in the liner thickening as the circumference becomes smaller. Strains of up to {approximately}1.25 and strain rates of up to {approximately}10{sup 6} sec{sup -1} can be readily achieved in a material sample placed inside of an aluminum driver liner, using the Pegasus II capacitor bank. This provides yield strength data at conditions where none presently exists. The heating from work done against the yield strength is measured with multichannel pyrometry from infrared radiation emitted by the material sample. The temperature data as a function of liner position are unfolded to give the yield strength along the strain, strain-rate trajectory. Proper design of the liner and sample configuration ensures that the current diffused into the sample adds negligible heating. An important issue, in this type of temperature measurement, is shielding of the pickup optics from other sources of radiation. At strains greater than those achievable on Pegasus, e.g. the LANL Atlas facility, some materials may be heated all the way to melt by this process. Recent data on 6061-T6 Aluminum will be compared with an existing model for strain and strain-rate heating. The liner configuration and pyrometry diagnostic will also be discussed.

  9. Heterogeneity within Corynebacterium minutissimum strains is explained by misidentified Corynebacterium amycolatum strains.

    PubMed

    Zinkernagel, A S; von Graevenitz, A; Funke, G

    1996-09-01

    Forty-eight clinical strains that were tentatively identified as Corynebacterium minutissimum on the basis of standard biochemical reactions (Hollis-Weaver tables) as well as by the use of the API (RAPID) Coryne system were examined further. Two different groups of strains were observed. The first group (including the type strain of C minutissimum) contained 27 strains showing creamy colonies. These strains grew homogeneously in 6.5% NaCl broth, exhibited DNase activity, were susceptible to the vibriocidal compound O/129, produced succinic acid, and contained mycolic acids. The second group comprised 21 strains with dry colonies. They grew in clumps at the surface of 6.5% NaCl broth, DNase activity was not detected, they were resistant against O/129, produced large amounts of propionic acid, and mycolic acids were not detected. In combination with quantitative DNA-DNA hybridizations, it was demonstrated that strains of the second cluster belonged, in fact, to C amycolatum. Furthermore, it was observed that a few C minutissimum strains may also ferment mannitol. These data indicate that the clinical microbiologist must be careful not to misidentify C amycolatum strains as C minutissimum. PMID:8816598

  10. True stress-strain curve acquisition for irradiated stainless steel including the range exceeding necking strain

    NASA Astrophysics Data System (ADS)

    Kamaya, Masayuki; Kitsunai, Yuji; Koshiishi, Masato

    2015-10-01

    True stress-strain curves were obtained for irradiated 316L stainless steel by a tensile test and by a curve estimation procedure. In the tensile test, the digital image correlation technique together with iterative finite element analysis was applied in order to identify curves for strain larger than the necking strain. The true stress-strain curves were successfully obtained for the strain of more than 0.4 whereas the necking strain was about 0.2 in the minimum case. The obtained true stress-strain curves were approximated well with the Swift-type equation including the post-necking strain even if the exponential constant n was fixed to 0.5. Then, the true stress-strain curves were estimated by a curve estimation procedure, which was referred to as the K-fit method. Material properties required for the K-fit method were the yield and ultimate strengths or only the yield strength. Some modifications were made for the K-fit method in order to improve estimation accuracy for irradiated stainless steels.

  11. Genome-Wide Transcription Study of Cryptococcus neoformans H99 Clinical Strain versus Environmental Strains

    PubMed Central

    Movahed, Elaheh; Munusamy, Komathy; Tan, Grace Min Yi; Looi, Chung Yeng; Tay, Sun Tee; Wong, Won Fen

    2015-01-01

    The infection of Cryptococcus neoformans is acquired through the inhalation of desiccated yeast cells and basidiospores originated from the environment, particularly from bird’s droppings and decaying wood. Three environmental strains of C. neoformans originated from bird droppings (H4, S48B and S68B) and C. neoformans reference clinical strain (H99) were used for intranasal infection in C57BL/6 mice. We showed that the H99 strain demonstrated higher virulence compared to H4, S48B and S68B strains. To examine if gene expression contributed to the different degree of virulence among these strains, a genome-wide microarray study was performed to inspect the transcriptomic profiles of all four strains. Our results revealed that out of 7,419 genes (22,257 probes) examined, 65 genes were significantly up-or down-regulated in H99 versus H4, S48B and S68B strains. The up-regulated genes in H99 strain include Hydroxymethylglutaryl-CoA synthase (MVA1), Mitochondrial matrix factor 1 (MMF1), Bud-site-selection protein 8 (BUD8), High affinity glucose transporter 3 (SNF3) and Rho GTPase-activating protein 2 (RGA2). Pathway annotation using DAVID bioinformatics resource showed that metal ion binding and sugar transmembrane transporter activity pathways were highly expressed in the H99 strain. We suggest that the genes and pathways identified may possibly play crucial roles in the fungal pathogenesis. PMID:26360021

  12. Inexpensive Implementation of Many Strain Gauges

    NASA Technical Reports Server (NTRS)

    Berkun, Andrew C.

    2010-01-01

    It has been proposed to develop arrays of strain gauges as arrays of ordinary metal film resistors and associated electronic readout circuitry on printed circuit boards or other suitable substrates. This proposal is a by-product of a development of instrumentation utilizing metal film resistors on printed-circuit boards to measure temperatures at multiple locations. In the course of that development, it was observed that in addition to being sensitive to temperature, the metal film resistors were also sensitive to strains in the printed-circuit boards to which they were attached. Because of the low cost of ordinary metal film resistors (typically <$0.01 apiece at 2007 prices), the proposal could enable inexpensive implementation of arrays of many (e.g., 100 or more) strain gauges, possibly concentrated in small areas. For example, such an array could be designed for use as a computer keyboard with no moving parts, as a device for sensing the shape of an object resting on a surface, or as a device for measuring strains at many points on a mirror, a fuel tank, an airplane wing, or other large object. Ordinarily, the effect of strain on resistance would be regarded as a nuisance in a temperature-measuring application, and the effect of temperature on resistance would be regarded as a nuisance in a strain-measuring application. The strain-induced changes in resistance of the metal film resistors in question are less than those of films in traditional strain gauges. The main novel aspect of present proposal lies in the use of circuitry affording sufficient sensitivity to measure strain plus means for compensating for the effect of temperature. For an array of metal film resistors used as proposed, the readout circuits would include a high-accuracy analog-to-digital converter fed by a low noise current source, amplifier chain, and an analog multiplexer chain. Corrections would be provided by use of high-accuracy calibration resistors and a temperature sensor. By use of

  13. Volume strain within the Geysers geothermal field

    SciTech Connect

    Mossop, Antony; Segall, Paul

    1999-12-10

    During the 1970s and 1980s. The Geysers geothermal region was rapidly developed as a site of geothermal power production. The likelihood that this could cause significant strain within the reservoir, with corresponding surface displacements, led to a series of deformation monitoring surveys. In 1973, 1975, 1977, and 1980, The Geysers region was surveyed using first-order, class I, spirit leveling. In 1994, 1995, and 1996, many of the leveling control monuments were resurveyed using high-precision Global Positioning System receivers. The two survey methods are reconciled using the GEOID96 geoid model. The displacements are inverted to determine volume strain within the reservoir. For the period 1980-1994, peak volume strains in excess of 5x10{sup -4} are imaged. There is an excellent correlation between the observed changes in reservoir steam pressures and the imaged volume strain. If reservoir pressure changes are inducing volume strain, then the reservoir quasi-static bulk modulus K must be <4.6x10{sup 9} Pa. However, seismic velocities indicate a much stiffer reservoir with K=3.4x10{sup 10} Pa. This apparent discrepancy is shown to be consistent with predicted frequency dependence in K for fractured and water-saturated rock. Inversion of surface deformation data therefore appears to be a powerful method for imaging pressure change within the body of the reservoir. Correlation between induced seismicity at The Geysers and volume strain is observed. However, earthquake distribution does not appear to have a simple relationship with volume strain rate. (c) 1999 American Geophysical Union.

  14. Psychological strains found in the suicides of 72 celebrities.

    PubMed

    Zhang, Jie; Tan, Jiandan; Lester, David

    2013-07-01

    The interpretation of suicide involves theories from many disciplines, and the strain theory of suicide is a social-psychological model that attempts to account for this complicated behavior. We have earlier explored the presence of psychological strains in a number of diverse samples of suicides and in the present study, we identified the strains experienced throughout the lives as documented in the biographies of 72 celebrities. The biographies were systematically identified through a number of requirements and composed by one of the authors of this study years before the strain theory of suicide was proposed. A graduate student coder, who was unaware of the strain theory of suicide, was hired to carry out a content analysis of the biography essays and categorize the life events and the responses of the suicide in terms of the four types of strains. Of the 72 suicides, one had no strains, one had all the four strains, four had only one, 30 had two, and 36 had three strains. The most common strain was aspiration strain (97%), followed by deprivation strain (89%), value strain (54%) and coping deficiency strain (4%). It is also noted that religious celebrities were more likely to experience value strain, while those celebrities who had experienced a downhill path in their careers were more likely to experience deprivation and coping strains. This analysis of the 72 celebrity suicides supported the strain theory of suicide. PMID:23462347

  15. The Effect of Ivermectin in Seven Strains of Aedes aegypti (Diptera: Culicidae) Including a Genetically Diverse Laboratory Strain and Three Permethrin Resistant Strains

    PubMed Central

    Deus, K. M.; Saavedra-rodriguez, K.; Butters, M. P.; Black, W. C.; Foy, B. D.

    2014-01-01

    Seven different strains of Aedes aegypti (L.), including a genetically diverse laboratory strain, three laboratory-selected permethrin-resistant strains, a standard reference strain, and two recently colonized strains were fed on human blood containing various concentrations of ivermectin. Ivermectin reduced adult survival, fecundity, and hatch rate of eggs laid by ivermectin-treated adults in all seven strains. The LC50 of ivermectin for adults and the concentration that prevented 50% of eggs from hatching was calculated for all strains. Considerable variation in adult survival after an ivermectin-bloodmeal occurred among strains, and all three permethrin-resistant strains were significantly less susceptible to ivermectin than the standard reference strain. The hatch rate after an ivermectin bloodmeal was less variable among strains, and only one of the permethrin-resistant strains differed significantly from the standard reference strain. Our studies suggest that ivermectin induces adult mortality and decreases the hatch rate of eggs through different mechanisms. A correlation analysis of log-transformed LC50 among strains suggests that permethrin and ivermectin cross-resistance may occur. PMID:22493855

  16. Anisotropic nature of radially strained metal tubes

    NASA Astrophysics Data System (ADS)

    Strickland, Julie N.

    Metal pipes are sometimes swaged by a metal cone to enlarge them, which increases the strain in the material. The amount of strain is important because it affects the burst and collapse strength. Burst strength is the amount of internal pressure that a pipe can withstand before failure, while collapse strength is the amount of external pressure that a pipe can withstand before failure. If the burst or collapse strengths are exceeded, the pipe may fracture, causing critical failure. Such an event could cost the owners and their customers millions of dollars in clean up, repair, and lost time, in addition to the potential environmental damage. Therefore, a reliable way of estimating the burst and collapse strength of strained pipe is desired and valuable. The sponsor currently rates strained pipes using the properties of raw steel, because those properties are easily measured (for example, yield strength). In the past, the engineers assumed that the metal would be work-hardened when swaged, so that yield strength would increase. However, swaging introduces anisotropic strain, which may decrease the yield strength. This study measured the yield strength of strained material in the transverse and axial direction and compared them to raw material, to determine the amount of anisotropy. This information will be used to more accurately determine burst and collapse ratings for strained pipes. More accurate ratings mean safer products, which will minimize risk for the sponsor's customers. Since the strained metal has a higher yield strength than the raw material, using the raw yield strength to calculate burst and collapse ratings is a conservative method. The metal has even higher yield strength after strain aging, which indicates that the stresses are relieved. Even with the 12% anisotropy in the strained and 9% anisotropy in the strain aged specimens, the raw yield strengths are lower and therefore more conservative. I recommend that the sponsor continue using the raw

  17. Fast flexible electronics with strained silicon nanomembranes

    PubMed Central

    Zhou, Han; Seo, Jung-Hun; Paskiewicz, Deborah M.; Zhu, Ye; Celler, George K.; Voyles, Paul M.; Zhou, Weidong; Lagally, Max G.; Ma, Zhenqiang

    2013-01-01

    Fast flexible electronics operating at radio frequencies (>1 GHz) are more attractive than traditional flexible electronics because of their versatile capabilities, dramatic power savings when operating at reduced speed and broader spectrum of applications. Transferrable single-crystalline Si nanomembranes (SiNMs) are preferred to other materials for flexible electronics owing to their unique advantages. Further improvement of Si-based device speed implies significant technical and economic advantages. While the mobility of bulk Si can be enhanced using strain techniques, implementing these techniques into transferrable single-crystalline SiNMs has been challenging and not demonstrated. The past approach presents severe challenges to achieve effective doping and desired material topology. Here we demonstrate the combination of strained- NM-compatible doping techniques with self-sustained-strain sharing by applying a strain-sharing scheme between Si and SiGe multiple epitaxial layers, to create strained print-transferrable SiNMs. We demonstrate a new speed record of Si-based flexible electronics without using aggressively scaled critical device dimensions. PMID:23416347

  18. Strains and tilts on crustal blocks

    NASA Technical Reports Server (NTRS)

    Bilham, R. G.; Beavan, R. J.

    1979-01-01

    Geodetic work done over the past century is examined to investigate block motion in areas of intense tectonic deformation, with special attention to geodetic releveling data obtained for Japan. Problems in interpreting strainmeter and tiltmeter to study the behavior of crustal blocks and block boundaries are discussed. Block dimensions of 5 to 50 km seem to occur frequently in regions of intense tectonic activity. Block boundaries are often considerably weaker than contiguous crustal blocks, resulting in a concentration of strains at boundaries and decrease of strains within blocks. Block to block variations in tilt phase and magnitude are observed. There is some evidence that block boundaries may exhibit strain-dependent elastic properties or respond viscoelastically, possibly accounting for the slow transmission of tectonic deformation reported in Japan. If nonlinear behavior is characteristic of regions fragmented by crustal blocks, it will generally not be possible to apply a site correction factor based on the observed distortion of tidal or seismic strains in interpreting secular strains.

  19. Production of cyclosporins by Tolypocladium niveum strains.

    PubMed Central

    Isaac, C E; Jones, A; Pickard, M A

    1990-01-01

    Nine strains of Tolypocladium niveum (= inflatum) were compared for their production of cyclosporins. Two of the strains, which were originally from the parental NRRL 8044 strain, were among the lower producers, while seventeen Tolypocladium strains belonging to seven other species produced no detectable cyclosporins. Variable cyclosporin production was observed initially. Once extraction and quantitation methods had been established, spore inoculum density and cultural morphology and carbon and nitrogen sources were found to be among the variables affecting cyclosporin production. Cyclosporin A was identified by cochromatography by using high-performance liquid chromatography, and cyclosporins A, B, and C were identified by gas chromatography-mass spectroscopy; all three compounds exhibited biological activity. They were routinely produced as a mixture in the ratio 7:1:2 in T. niveum UAMH 2472, which was selected on the basis of single-spore isolate total cyclosporin production and was used for most studies. This strain routinely produced total cyclosporin levels of 150 to 200 mg.liter-1 after 12 days of growth on a 2% sorbose-1% vitamin assay Casamino Acids medium. PMID:2327746

  20. Glucosyltransferase gene polymorphism among Streptococcus mutans strains.

    PubMed Central

    Chia, J S; Hsu, T Y; Teng, L J; Chen, J Y; Hahn, L J; Yang, C S

    1991-01-01

    Genetic polymorphisms in genes coding for the glucosyltransferases were detected among Streptococcus mutans serotype c strains by Southern blot analysis with DNA probes located within the gtfB gene (H. Aoki, T. Shiroza, M. Hayakawa, S. Sato, and H. K. Kuramitsu, Infect. Immun. 53:587-594, 1986). Restriction endonucleases were used to examine genomic DNAs isolated from serotype a to h strains. The variations were readily detected among 33 strains of serotype c by EcoRI and PstI restriction enzyme digestions. Serotypes e and f, which are genetically similar to serotype c, also had comparable polymorphism; however, serotypes a, b, d, g, and h did not hybridize to the same DNA probes in parallel experiments. Further analysis of enzymatic activities for glucan synthesis and sucrose-dependent adherence revealed no significant differences among the serotype c strains. Our results suggested that genetic polymorphisms existing in S. mutans serotype c strains may reflect a complexity in genes coding for the glucosyltransferases, which are produced ubiquitously in members of the S. mutans group. Images PMID:1826894

  1. [Acetobutylic fermentation: strains and regional raw materials].

    PubMed

    Benassi, F O; Bloos, R K; de Rambaldo, L A

    1983-01-01

    The purpose of the present work was to show, as a first stage, that it is possible to characterize autochtohnous strains of Clostridium acetobutilicum of a good solvent producing capacity, specially N-butanol, through the utilization of suitable techniques for isolating anaerobic microorganisms. Cassava roots were employed as raw material using suitable culture media and an anaerobic jar of cold catalyst. The fermentative capacity of the strains thus isolated was evaluated against a control strain of Clostridium acetobutilicum. Even though some of the strains showed a greater solvent producing power, most of them showed lower fermentation capacity than the control strain, which could be increased, by applying successive thermic treatments. As a second stage, and due to the low cost production of cassava in the Province of Misiones, we studied its utilization as an acetone-butanol fermentation substrate. Mashes composed of binary mixtures of cassava flour and variable amounts of integral flour maize or soy were treated with selected "starters" of Clostridium acetobutilicum, being further processed according to standardized techniques in order to obtain the already mentioned solvents. Mashes concentration influence was also studied using culture media the composition of which proved to be excellent in all experiments carried out under "static system" conditions. The highest fermentative yields (maximum value recorded: 26,20 g of total solvents, with respect to dry solids), were recorded for mashes obtained from mixtures containing integral maize flour; these showed a higher degree of nutrients utilization than those prepared with integral soy flour. PMID:6400763

  2. Secretome analysis of Clostridium difficile strains.

    PubMed

    Boetzkes, Alexander; Felkel, Katharina Wiebke; Zeiser, Johannes; Jochim, Nelli; Just, Ingo; Pich, Andreas

    2012-08-01

    Clostridium difficile causes infections ranging from mild C. difficile-associated diarrhea to severe pseudomembranous colitis. Since 2003 new hypervirulent C. difficile strains (PCR ribotype 027) emerged characterized by a dramatically increased mortality. The secretomes of the three C. difficile strains CDR20291, CD196, and CD630 were analyzed and compared. Proteins were separated and analyzed by means of SDS--PAGE and LC-MS. MS data were analyzed using Mascot and proteins were checked for export signals with SecretomeP and SignalP. LC-MS analysis revealed 158 different proteins in the supernatant of C. difficile. Most of the identified proteins originate from the cytoplasm. Thirty-two proteins in CDR20291, 36 in CD196 and 26 in CD630 were identified to be secreted by C. difficile strains. Those were mainly S-layer proteins, substrate-binding proteins of ABC-transporters, cell wall hydrolases, pilin and unknown hypothetical proteins. Toxin A and toxin B were identified after growth in brain heart infusion medium using immunological techniques. The ADP-ribosyltransferase-binding component protein, which is a part of the binary toxin CDT, was only identified in the hypervirulent ribotype 027 strains. Further proteins that are secreted specifically by hypervirulent strains were identified. PMID:22398929

  3. Crack initiation under generalized plane strain conditions

    SciTech Connect

    Shum, D.K.M.; Merkle, J.G.

    1991-01-01

    A method for estimating the decrease in crack-initiation toughness, from a reference plane strain value, due to positive straining along the crack front of a circumferential flaw in a reactor pressure vessel is presented in this study. This method relates crack initiation under generalized plane strain conditions with material failure at points within a distance of a few crack-tip-opening displacements ahead of a crack front, and involves the formulation of a micromechanical crack-initiation model. While this study is intended to address concerns regarding the effects of positive out-of- plane straining on ductile crack initiation, the approach adopted in this work can be extended in a straightforward fashion to examine conditions of macroscopic cleavage crack initiation. Provided single- parameter dominance of near-tip fields exists in the flawed structure, results from this study could be used to examine the appropriateness of applying plane strain fracture toughness to the evaluation of circumferential flaws, in particular to those in ring-forged vessels which have no longitudinal welds. In addition, results from this study could also be applied toward the analysis of the effects of thermal streaming on the fracture resistance of circumferentially oriented flaws in a pressure vessel. 37 refs., 8 figs., 1 tab.

  4. Extraordinary strain hardening by gradient structure

    PubMed Central

    Wu, XiaoLei; Jiang, Ping; Chen, Liu; Yuan, Fuping; Zhu, Yuntian T.

    2014-01-01

    Gradient structures have evolved over millions of years through natural selection and optimization in many biological systems such as bones and plant stems, where the structures change gradually from the surface to interior. The advantage of gradient structures is their maximization of physical and mechanical performance while minimizing material cost. Here we report that the gradient structure in engineering materials such as metals renders a unique extra strain hardening, which leads to high ductility. The grain-size gradient under uniaxial tension induces a macroscopic strain gradient and converts the applied uniaxial stress to multiaxial stresses due to the evolution of incompatible deformation along the gradient depth. Thereby the accumulation and interaction of dislocations are promoted, resulting in an extra strain hardening and an obvious strain hardening rate up-turn. Such extraordinary strain hardening, which is inherent to gradient structures and does not exist in homogeneous materials, provides a hitherto unknown strategy to develop strong and ductile materials by architecting heterogeneous nanostructures. PMID:24799688

  5. Closure of fatigue cracks at high strains

    NASA Technical Reports Server (NTRS)

    Iyyer, N. S.; Dowling, N. E.

    1985-01-01

    Experiments were conducted on smooth specimens to study the closure behavior of short cracks at high cyclic strains under completely reversed cycling. Testing procedures and methodology, and closure measurement techniques, are described in detail. The strain levels chosen for the study cover from predominantly elastic to grossly plastic strains. Crack closure measurements are made at different crack lengths. The study reveals that, at high strains, cracks close only as the lowest stress level in the cycle is approached. The crack opening is observed to occur in the compressive part of the loading cycle. The applied stress needed to open a short crack under high strain is found to be less than for cracks under small scale yielding. For increased plastic deformations, the value of sigma sub op/sigma sub max is observed to decrease and approaches the value of R. Comparison of the experimental results with existing analysis is made and indicates the limitations of the small scale yielding approach where gross plastic deformation behavior occurs.

  6. Multiwalled carbon nanotube film for strain sensing

    NASA Astrophysics Data System (ADS)

    Li, X.; Levy, C.; Elaadil, L.

    2008-01-01

    We have studied the possibility of using multiwalled carbon nanotube (MWCNT) films as strain sensors. The MWCNT films were prepared by a solution/filtration method and were bonded directly onto specimens by a nonconductive adhesive. For comparison, conventional foil strain gages were also bonded to the structure on the opposite side. The specimens then underwent a uniaxial tensile load-unload cycle to evaluate them as strain sensors. To ensure good electrical contact between carbon nanotube film and the wires, a thin layer of copper was thermally deposited on both ends of the film as electrodes, and the wires were connected to the electrodes by silver ink. Wheatstone bridges were used to convert the resistance changes of the MWCNTs to voltage output. Results indicated that the output voltages were proportional to the strain readings from the stain indicator. The effect of temperature on the resistance was measured and the MWCNT film resistance was found to be independent of temperature over the range 273-363 K. The optimal film dimension for strain sensing was evaluated as well. Dynamic tests suggest that the MWCNTs were able to extract the structural signature. Our results indicate that MWCNT film is potentially useful for structural health monitoring and vibration control applications.

  7. Measurement of high temperature strain by the laser-speckle strain gauge

    NASA Technical Reports Server (NTRS)

    Yamaguchi, I.

    1984-01-01

    By using the laser-speckle strain gauge, the strain of metal at the temperature lower than 250 C is measured. The principle of the gauge is to measure the expansion or contraction of the fine structures of surface by detecting the resultant speckle displacement in an optoelectronic way, whereby the effect of rigid-body motion is automatically cancelled out with the aid of a differential detection system. A transportable apparatus was built and a comparison experiment performed with a resistance strain gauge at room temperature. It has a strain sensitivity of .00002, a gauge length smaller than 1 mm, and no upper limit in a range of strain measurement. In the measurement of high-temperature strain it is free from the need for a dummy gauge and insensitive to an electric drift effect. As examples of strain measurement at high-temperature, thermal expansion and contraction of a top of a soldering iron are measured. The interval of the measurement can be made at shortest 1.6 sec. and the change in the strain is clearly followed until the ultimate stationary temperature is reached.

  8. Effect of strain isolator pad modulus on inplane strain in Shuttle Orbiter thermal protection system tiles

    NASA Technical Reports Server (NTRS)

    Sawyer, J. W.

    1983-01-01

    The thermal protection system used on the Space Shuttle orbiter to determine strains in the reusable surface insulation tiles under simulated flight loads was investigated. The effects of changes in the strain isolator pad (SIP) moduli on the strains in the tile were evaluated. To analyze the SIP/tile system, it was necessary to conduct tests to determine inplane tension and compression modulus and inplane failure strain for the densified layer of the tiles. It is shown that densification of the LI-900 tile material increases the modulus by a factor of 6 to 10 and reduces the failure strain by about 50%. It is indicated that the inplane strain levels in the Shuttle tiles in the highly loaded regions are approximately 2 orders of magnitude lower than the failure strain of the material. It is concluded that most of the LI-900 tiles on the Shuttle could be mounted on a SIP with tensile and shear stiffnesses 10 times those of the present SIP without inplane strain failure in the tile.

  9. Strain typing of U.S. scrapie strains using a panel of inbred mice

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Prion strains may vary in their ability to transmit to humans and animals. Few experimental studies have been done to provide evidence of differences between U.S. strains of scrapie, which can be distinguished by incubation times in inbred mice, microscopic lesions, immunoreactivity to various anti...

  10. Strain Rate Dependence of Compressive Stress-Strain Loops of Several Polymers

    NASA Astrophysics Data System (ADS)

    Nakai, Kenji; Yokoyama, Takashi

    The compressive stress-strain loops of several commercial polymers at strain rates of nearly 700/s are determined in the standard split Hopkinson pressure bar. Four different polymers or typical thermoplastics: ABS, PA-6, PA-66 and PC are tested at room temperature. Cylindrical specimens with a slenderness ratio (= height l /diameter d) of 0.5 are used in the Hopkinson bar tests, and those with l/d = 1.5 as specified in the ASTM Designation E9-89a are used in the static tests. The stress-strain loops in compression at low and intermediate strain rates are measured in an Instron testing machine. The influences of strain rate on the Young's modulus, 2.5% flow stress and dissipation energy are investigated. It is demonstrated that the area within the stress-strain loop (or dissipation energy) increases with increasing strain rate as well as given strain, that is, all polymers tested exhibit intrinsic dynamic viscoelasticity and a high elastic aftereffect following complete unloading.