Science.gov

Sample records for die messung des

  1. Die Welt des Herrn Kuhn

    NASA Astrophysics Data System (ADS)

    Kern, Daniela

    Eines Morgens erwachte Herr Kuhn fröstelnd und staunte darüber, dass es in seinerWohnung eiskalt war. Dennoch quälte er sich aus seiner kuscheligen Bettdecke heraus und schlurfte ins Bad. "Hoffentlich wird wenigstens das Wasser warm", dachte er sich, als er den Wasserhahn betätigte - aber es kam nicht nur kein warmesWasser, außer einem unheilvollen Gluckser kam gar nichts aus der Leitung. "Dann werde ich wohl mal den Klempner anrufen", sprach er sich leise in den Bart und griff zu seinem Handy - doch das Netz war tot! Herr Kuhn begann nun, sich ernsthaft Sorgen zu machen, "Oje, was ist denn heute nur los? Ist irgendetwas Schlimmes passiert?" Um einen besseren Überblick über die Lage zu bekommen und sich austauschen zu können, brannte er nun förmlich darauf, rauszugehen und zur Arbeit zu fahren. An anderen Tagen, die er frisch geduscht und mit Kaffee und Marmeladen-Brot begann, war er selten so motiviert. So ging er also nun mit leerem Magen aus dem Haus. Hätte er den Versuch unternommen, sein tägliches Marmeladenbrot zuzubereiten, und dafür den Kühlschrank geöffnet, um das Marmeladenglas herauszunehmen, wäre ihm aufgefallen, dass auch die Stromversorgung Störungen unterworfen war, unschön zu erkennen an den ersten grünen, felligen Inseln auf seinem Lieblingskäse.

  2. Das Neutron, der Kosmos und die Kräfte: Neutronen in der Teilchenphysik

    NASA Astrophysics Data System (ADS)

    Soldner, Torsten

    2003-05-01

    Das Neutron besitzt eine einzigartige Kombination von Eigenschaften. Sie ermöglicht die Untersuchung aller vier elementaren Kräfte. Dabei wurden beeindruckende Resultate erzielt, wie die Präzisionsmessungen der elektrischen Ladung des Neutrons oder der Feinstrukturkonstante zeigen. Die genaue Bestimmung der schwachen Wechselwirkungsstärke der Nukleonen liefert der Astrophysik wichtige Daten. Die Messung eines von Null verschiedenen elektrischen Dipolmoments des Neutrons könnte einen entscheidenden Hinweis über die Physik jenseits des Standardmodells der Teilchenphysik geben. Doch auch zur Aufklärung von Unsicherheiten innerhalb des Standardmodells selbst tragen Neutronen bei.

  3. Die Gasultrazentrifuge als mediale Projektion des Kalten Krieges

    NASA Astrophysics Data System (ADS)

    Helmbold, Bernd

    Studien der letzten Dekaden nach der Wiedervereinigung von BRD und DDR erweitern die Perspektive der Wissenschaftsgeschichte vom Fokus des Big Science und der technisch-militärisch-industriellen Auseinandersetzung zwischen den zwei Blöcken zu einer globalen Transformation im Konflikt der Supermächte geprägt durch lokale und auch interne Ausformungen.

  4. Messung und Analyse

    NASA Astrophysics Data System (ADS)

    Bathelt, Hartmut; Scheinhardt, Michael; Sell, Hendrik; Sottek, Roland; Guidati, Sandro; Helfer, Martin

    Für die Beurteilung von Akustik und Fahrkomfort eines Fahrzeugs gilt in der Fahrzeugentwicklung immer noch der alte Grundsatz: "Der Kunde fährt nicht am Prüfstand, sondern auf der Straße“. Daher werden Gesamtbeurteilungen des Entwicklungsstandes und Konkurrenzvergleiche (Benchmarking) nach wie vor auf der Straße durchgeführt, meist auf ausgewählten Fahrbahnen am Prüfgelände oder im Rahmen der regelmäßigen Winter- und Sommererprobungen unter extremen Witterungsverhältnissen.

  5. Der Physik-Nobelpreis vor 100 Jahren Die Entdeckung des trägen Gases

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2004-11-01

    Im Jahr 1904 erhielt der britische Physiker Lord Rayleigh (John William Strutt, 1842 bis 1919) den Nobelpreis für seine Untersuchungen über die Dichte von Gasen und die Entdeckung des Edelgases Argon.

  6. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  7. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  8. Modellierung des Einflusses der Landnutzung auf die Hochwasserentstehung in der Mesoskala

    NASA Astrophysics Data System (ADS)

    Niehoff, Daniel

    2001-10-01

    Seit 1990 waren mehrere der großen Flussgebiete Mitteleuropas wiederholt von extremen Hochwassern betroffen. Da sowohl die Landoberfläche als auch die Flusssysteme weiter Teile Mitteleuropas in der Vergangenheit weitreichenden Eingriffen ausgesetzt gewesen sind, wird bei der Suche nach den Ursachen für diese Häufung von Extremereignissen auch die Frage nach der Verantwortung des Menschen hierfür diskutiert. Gewässerausbau, Flächenversiegelung, intensive landwirtschaftliche Bodenbearbeitung, Flurbereinigung und Waldschäden sind nur einige Beispiele und Folgen der anthropogenen Eingriffe in die Landschaft. Aufgrund der Vielfalt der beteiligten Prozesse und deren Wechselwirkungen gibt es allerdings bislang nur Schätzungen darüber, wie sehr sich die Hochwassersituation hierdurch verändert hat. Vorrangiges Ziel dieser Arbeit ist es, mit Hilfe eines hydrologischen Modells systematisch darzustellen, in welcher Weise, in welcher Größenordnung und unter welchen Umständen die Art der Landnutzung auf die Hochwasserentstehung Einfluss nimmt. Dies wird anhand exemplarischer Modellanwendungen in der hydrologischen Mesoskala untersucht. Zu diesem Zweck wurde das deterministische und flächendifferenzierte hydrologische Modell wasim-eth ausgewählt, das sich durch eine ausgewogene Mischung aus physikalisch begründeten und konzeptionellen Ansätzen auszeichnet. Das Modell wurde im Rahmen dieser Arbeit um verschiedene Aspekte erweitert, die für die Charakterisierung des Einflusses der Landnutzung auf die Hochwasserentstehung wichtig sind: (1) Bevorzugtes Fließen in Makroporen wird durch eine Zweiteilung des Bodens in Makroporen und Bodenmatrix dargestellt, die schnelle Infiltration und Perkolation jenseits der hydraulischen Leitfähigkeit der Bodenmatrix ermöglicht. (2) Verschlämmung äußert sich im Modell abhängig von Niederschlagsintensität und Vegetationsbedeckungsgrad als Verschlechterung der Infiltrationsbedingungen an der Bodenoberfläche. (3) Das

  9. BOOK REVIEW: Astronomie und Anschaulichkeit. Die Bilder der populaeren Astronomie des 19. Jahrhunderts

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Utzt, S.

    2004-12-01

    Today, popularisation of science also means "pretty pictures": images that accompany articles in magazines and webpages, or are squeezed between the covers of so-called coffee-table books, and the reviewer pleads guilty to having added to this growing pile. But how did this "disease" came into existence? Susanne Utzt, a manager, journalist and student in the history of sciences, has dedicated her master thesis to the investigation of the growing influence of such pictures in the popularisation of astronomy. She has analyzed French and German popular texts by Arago, Guillemin, Flammarion, as well as Littrow, Maedler and Max Wilhelm Meyer that mainly appeared in the second half of the 19th century. Earlier astronomy books just had a few foldout pages with mathematical figures, as the author exemplifies by Littrow's first edition of "Die Wunder des Himmels" of 1834-36. But Flammarion with his "Astronomie Populaire", changed everything: 51 "art pages" and more than 300 figures in the text made it a true picture book, and about a third of Utzt's work is dedicated to its analysis. (In passing, it should be noted that the first 1880 edition of Flammarion's book did not yet contain the "art pages"; the author quotes such pages and text figures according to a German edition of 1907). Besides sober diagrams illustrating the solar system, and telescope drawings showing planetary surfaces and the structure of the solar photosphere, Flammarion includes poetic illustrations like a couple at the seashore at sunset; a scene showing dying Copernicus, already flanked by two angels, as he receives a copy of his De Revolutionibus; or a painting showing a flock of mammoths in an ancient landscape. In most cases, the images are chosen to illustrate the text, but sometimes the text "makes a detour" to permit the inclusion of a pretty picture. Flammarion's book contains drawings illustrating the sphericity of the earth, which appeared in almost identical form in Apian's Cosmography of

  10. IQM-Reifegradmodell für die Bewertung und Verbesserung des Information Lifecycle Management Prozesses

    NASA Astrophysics Data System (ADS)

    Baškarada, Saša; Gebauer, Marcus; Koronios, Andy; Gao, Jing

    Heutige Organisationen produzieren und speichern mehr Informationen als je zuvor. Der resultierende Informationsüberfluss, zusammen mit einem Mangel an Qualitätssicherung für das Information Lifecycle Management, führt zu einem unsicheren Status der Informationsqualität in vielen Organisationen. Weiterhin hat sich herausgestellt, dass das Bewerten, Verbessern und Steuern der Informationsqualität ein offenkundig schwieriges Unterfangen ist. Dieses Kapitel stellt ein Modell zur Bewertung und Verbesserung der Information Quality Management Capability Maturity (IQM-Reifegrad) vor. Es wird ein Satz von Kriterien vorgestellt, der aus Literaturrecherche und Fallstudien abgeleitet wurde. Die Reifegradindikatoren werden validiert und in einem mehrstufigen Reifegradmodell durch eine Delphi-Studie gruppiert. Das abgeleitete IQM-Reifegradmodell hilft Organisationen ihre bestehenden Praktiken im IQM zu bewerten und potentielle Lücken und Verbesserungsstrategien zu ermitteln.

  11. Wege in die Zukunft

    NASA Astrophysics Data System (ADS)

    Kauermann, Göran; Mosler, Karl

    Die Zukunft stellt große Herausforderungen an die Arbeit der Deutschen Statistischen Gesellschaft. Sie betreffen die gestiegenen Anforderungen der Nutzer von Statistik, die Kommunikationsmöglichkeiten des Internets sowie die Dynamik der statistischen Wissenschaften und ihrer Anwendungsgebiete. Das Kapitel 5 beschreibt, wie sich die Gesellschaft diesen Herausforderungen stellt und welche Ziele sie sich in der wissenschaftlichen Zusammenarbeit und im Kampf gegen das Innumeratentum gesetzt hat.

  12. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    Die Ausstattung der gastrointestinalen Mukosa des Menschen und der Ratte mit Sulfotransferasen wurde mit Hilfe von Immunodetektion und Enzymaktivitätsmessungen untersucht. In Proben aus Colon und Rektum von 39 Personen wurden die Formen h1A1, h1A3 und h1B1 identifiziert, wobei in einer weiteren Probe, die als einzige von einem an Colitis Ulcerosa erkrankten Patienten stammte, keine Sulfotransferasen nachgewiesen werden konnten. Bei der Immunblot-Analyse war das Expressionsmuster der einzelnen Formen in allen Proben ähnlich. In wenigen Proben waren die relativen Signalintensitäten der h1A1 und der h1B1 um die Hälfte erniedrigt. Der Gehalt von SULT an zytosolischem Protein zeigte einen bis zu 8 - 10fachen Unterschied, er betrug jedoch bei zwei Dritteln der Proben zwischen 0,15 und 0,3 (h1A1 und h1A3) bzw. 0,6 und 0,8 Promille (h1B1). Die Variation konnte nicht auf Alter, Geschlecht oder Krankheitsbild der Patienten zurückgeführt werden. Auch der für die allelischen Varianten der h1A1 beschriebene Effekt auf die Enzymaktiviät bzw. Stabilität konnte in der Menge an immunreaktivem Protein nicht in diesem Ausma detektiert werden. Die Allelhäufigkeit von h1A1*R und h1A1*H war gegenüber der gesunden Bevölkerung nicht verändert. In den sieben Proben aus dem Dünndarm (Coecum, viermal Ileum, Jejunum) konnten zusätzlich die Formen h1E1 und h2A1 identifiziert werden. Ein möglicherweise der Form h1C1 entsprechendes Protein wurde im Magen detektiert. Im Vergleich zum Menschen war die Expression in der Ratte stärker auf die Leber konzentriert. Während beim Menschen in allen untersuchten Abschnitten Sulfotransferasen in Mengen detektiert wurden, die in zwei Fällen (h1B1 und h1A3) sogar den Gehalt in der Leber überstiegen, beschränkte sich die Expression in der Ratte auf im Vergleich zur Leber geringe Mengen im Magen und Dickdarm. Nachgewiesen wurden die r1B1, r1A1 sowie eine nicht identifizierte Form von 35kD, bei der es sich vermutlich um die r1C2 handelt. Im

  13. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  14. Die zwei Kulturen

    NASA Astrophysics Data System (ADS)

    Ankolekar, Anupriya; Krötzsch, Markus; Tran, Than; Vrandecic, Denny

    Oft werden zwei mögliche Entwicklungen des Webs diskutiert - das Web 2.0 und das Semantic Web. Wenn wir diese zwei Visionen für das zukünftige Web unter die Lupe nehmen, dann lässt sich feststellen, dass sich die Ideen in ihrem Kern und ihren Technologien gegenseitig ergänzen. Dementsprechend können und sollen beide Visionen von den Erfahrungen und Stärken der anderen profitieren. Wir glauben daran, dass zukünftige Webanwendungen den Web 2.0-Fokus auf Community und Benutzerfreundlichkeit beibehalten und, darüber hinaus, auch von Technologien des Semantic Web zur Vereinfachung der mashupähnlichen Datenintegration profitieren werden. Auf Basis eines Semantic Blog-Szenarios werden wir hier die Vorteile einer möglichen Kombination von Semantic Web und Web 2.0 illustrieren, die zeitnah realisiert werden kann. Wir werden auch auf technische Probleme eingehen, die bei der Erweiterung dieses Szenarios entstehen. Wir stellen dar, wie aktuelle Entwicklungen in der Semantic Web Forschung diese Probleme angehen können, und setzen zugleich auch Schwerpunkte für die zukünftige Forschung, die in diesem Zusammenhang relevant sind.

  15. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    Die Ausstattung der gastrointestinalen Mukosa des Menschen und der Ratte mit Sulfotransferasen wurde mit Hilfe von Immunodetektion und Enzymaktivitätsmessungen untersucht. In Proben aus Colon und Rektum von 39 Personen wurden die Formen h1A1, h1A3 und h1B1 identifiziert, wobei in einer weiteren Probe, die als einzige von einem an Colitis Ulcerosa erkrankten Patienten stammte, keine Sulfotransferasen nachgewiesen werden konnten. Bei der Immunblot-Analyse war das Expressionsmuster der einzelnen Formen in allen Proben ähnlich. In wenigen Proben waren die relativen Signalintensitäten der h1A1 und der h1B1 um die Hälfte erniedrigt. Der Gehalt von SULT an zytosolischem Protein zeigte einen bis zu 8 - 10fachen Unterschied, er betrug jedoch bei zwei Dritteln der Proben zwischen 0,15 und 0,3 (h1A1 und h1A3) bzw. 0,6 und 0,8 Promille (h1B1). Die Variation konnte nicht auf Alter, Geschlecht oder Krankheitsbild der Patienten zurückgeführt werden. Auch der für die allelischen Varianten der h1A1 beschriebene Effekt auf die Enzymaktiviät bzw. Stabilität konnte in der Menge an immunreaktivem Protein nicht in diesem Ausma detektiert werden. Die Allelhäufigkeit von h1A1*R und h1A1*H war gegenüber der gesunden Bevölkerung nicht verändert. In den sieben Proben aus dem Dünndarm (Coecum, viermal Ileum, Jejunum) konnten zusätzlich die Formen h1E1 und h2A1 identifiziert werden. Ein möglicherweise der Form h1C1 entsprechendes Protein wurde im Magen detektiert. Im Vergleich zum Menschen war die Expression in der Ratte stärker auf die Leber konzentriert. Während beim Menschen in allen untersuchten Abschnitten Sulfotransferasen in Mengen detektiert wurden, die in zwei Fällen (h1B1 und h1A3) sogar den Gehalt in der Leber überstiegen, beschränkte sich die Expression in der Ratte auf im Vergleich zur Leber geringe Mengen im Magen und Dickdarm. Nachgewiesen wurden die r1B1, r1A1 sowie eine nicht identifizierte Form von 35kD, bei der es sich vermutlich um die r1C2 handelt. Im

  16. Die Evolution der Religiosität

    NASA Astrophysics Data System (ADS)

    Voland, Eckart

    Ein konsequent darwinischer Blick auf den Menschen bedeutet, auch im Denken, Fühlen und Handeln biologische Anpassungsgeschichte zu suchen, denn auch die psychischen und mentalen Eigenheiten des Homo sapiens unterliegen der natürlichen Selektion. Lässt sich die religiöse Lebenspraxis von Menschen daher auch aus einer Fitnessperspektive betrachten?

  17. Aufgaben und Genauigkeit der klinischen Dosimetrie

    NASA Astrophysics Data System (ADS)

    Krieger, Hanno

    In diesem Kapitel werden die Aufgaben der klinischen Dosimetrie für die verschiedenen radiologischen Disziplinen zusammengestellt. Die wichtigste Aufgabe ist die Messung der im bestrahlten Medium entstandenen Energiedosis für die verschiedenen Strahlungsquellen. Die am weitesten verbreitete dazu verwendete Methode ist die Dosismessung mit gasgefüllten Ionisationskammern. Im zweiten Teil des Kapitels werden die Genauigkeitsanforderungen der klinischen Dosimetrie diskutiert.

  18. SPHERICAL DIE

    DOEpatents

    Livingston, J.P.

    1959-01-27

    A die is presented for pressing powdered materials into a hemispherical shape of uniforin density and wall thickness comprising a fcmale and male die element held in a stationary spaced relation with the space being equivalent to the wall thickness and defining the hemispherical shape, a pressing ring linearly moveable along the male die element, an inlet to fill the space with powdered materials, a guiding system for moving the pressing ring along the male die element so as to press the powdered material and a heating system for heating the male element so that the powdered material is heated while being pressed.

  19. Darwin als Sehhilfe für die Psychologie - Evolutionspsychologie

    NASA Astrophysics Data System (ADS)

    Schwab, Frank

    Im Folgenden geht es um Einäugige, stereoskopisches Sehen, weite und enge Horizonte, Monokel und Sonnenbrillen. Der Beitrag versucht die Metapher des Sehens und der Sehhilfen anzuwenden, um so zu verdeutlichen, welchen Gewinn die herkömmliche Psychologie durch die Verwendung einer Darwin'schen Brille erlangen kann.

  20. Die Herz-Lungen-Maschine

    NASA Astrophysics Data System (ADS)

    Krane, Markus; Bauernschmitt, Robert; Lange, Rüdiger

    Das Kapitel der modernen Herzchirurgie mit Einsatz der Herz-Lungen-Maschine am Menschen beginnt am 6. Mai 1953, als J. Gibbon bei einer 18-jährigen Patientin einen angeborenen Defekt in der Vorhofscheidewand verschließt [1]. Mit ersten experimentellen Versuchen zur extrakorporalen Zirkulation begann Gibbon bereits in den 30er Jahren des 20. Jahrhunderts. Die Grundlage für die heute gebräuchliche Rollerpumpe schufen Porter und Bradley mit ihrer "rotary pump“, welche sie 1855 zum Patent anmeldeten. Diese Pumpe wurde von DeBakey und Schmidt modifiziert und entspricht im Wesentlichen noch der heute sich im Routinebetrieb befindlichen Rollerpumpe [2].

  1. Die Virus-induzierten Lebererkrankungen des Menschen

    NASA Astrophysics Data System (ADS)

    Eisenburg, J.

    1982-12-01

    Although many viral agents may be associated with inflammatory hepatic changes, the vast majority of clinically important viral hepatitis is caused by hepatitis A, hepatitis B and the non A, non B agents. Infection of the liver of man by these hepatotropic agents is still a major public health problem in all parts of the world and constitutes a major hazard of the transfusion of blood and plasma derivatives. The magnitude of this hepatitis problem is not only documented by the about 200 million carriers of the hepatitis-B virus throughout the world, many of them asymptomatic, but also by the fact, that hepatitis B and non A, non B may progress to chronic liver disease, including cirrhosis and probably primary liver cancer. Potentially important pathogenetic determinants include viral factors such as subtype, dosage and mode of transmission and host factors such as age, sex, preexisting liver disease, coexisting non-liver disease (diabetes etc.), genetics and immune response to viral or autoantigens. As the virus itself seems not directly cytopathic, the diversity of lesions has been attributed to variation in the capacity of the host's response.

  2. Über die Farbstoffe des Fliegenpilzes

    NASA Astrophysics Data System (ADS)

    Musso, H.

    1982-07-01

    A yellow as well as a violett and seven orange pigments have been isolated by chromatography on Sephadex from the extracts of the red skin of fly agaric. In contrast to earlier reports these were elucidated to belong to the betalain type class of colouring matters which have been known in higher plants so far. Biogenetic type synthesis confirm there structures and biogenetic considerations. These results are presented in context with others.

  3. Physiknobelei Kann man die Lichtausbreitung sehen?

    NASA Astrophysics Data System (ADS)

    Schlichting, H.-Joachim

    2003-07-01

    Des Menschen Sinne sind trügerisch. Das wussten schon die Philosophen der Antike, denen physikalische Zusammenhänge noch fremd waren. Doch auch in der heutigen aufgeklärten Zeit ereignen sich noch Dinge, bei denen man seinen Augen nicht traut.

  4. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C. Y.; Wallace, J. F.

    1981-01-01

    This investigation determined whether selected ion beam sputtered coatings on H-13 die steel would have the potential of improving the thermal fatigue behavior of the steel used as a die in aluminum die casting. The coatings were selected to test candidate insulators and metals capable of providing protection of the die surface. The studies indicate that 1 micrometer thick W and Pt coatings reduced the thermal fatigue more than any other coating tested and are candidates to be used on a die surface to increase die life.

  5. Sonderverfahren des Spritzgießens

    NASA Astrophysics Data System (ADS)

    Michaeli, Walther; Lettowsky, Christoph

    Das Spritzgießen ist neben der Extrusion das wichtigste Verarbeitungsverfahren für Kunststoffe [1]. Das Verfahren hat sich seit seinen Ursprüngen Ende des 19. Jahrhunderts bis heute stetig weiterentwickelt [2]. In neuerer Zeit steigt die Anzahl komplexer Anwendungen, die die gezielte Kombination verschiedener Funktionalitäten in einem Formteil erfordern. Das Standard-Spritzgießen kann diese Anforderungen immer weniger befriedigen. Daher gewinnen die Sonderverfahren des Spritzgießens zunehmend an Bedeutung [3]. Ihre Anzahl beträgt inzwischen über 100. Die Aufgabe des Anwenders ist es, aus der Vielzahl der möglichen Verfahren, ein anforderungsgerechtes auszuwählen, das sowohl unter technischen wie wirtschaftlichen Gesichtspunkten die optimale Lösung darstellt. Dies setzt die ständige Auseinandersetzung mit Entwicklungstendenzen im Bereich der Spritzgießtechnologie voraus. Daher soll im folgenden Abschnitt ein Überblick über die wichtigsten Spritzgieß-Sonderverfahren gegeben werden.

  6. Signale ohne Antwort? Die Suche nach außerirdischem Leben.

    NASA Astrophysics Data System (ADS)

    Davoust, E.

    This book is a German translation, by M. Röser, of the English version "The cosmic water hole", published in 1991 (see 53.003.080). The original French edition "Silence au point d'eau" was published in 1988 (see 45.003.059). Contents: I. Leben auf der Erde. 1. Kometen und der Ursprung des Lebens. 2. Die zeitliche Dimension des Lebens. 3. Evolution und Katastrophen. 4. Liegt unsere Zukunft im Weltall? II. Leben im Universum. 5. Die Suche nach Leben in der Sonnenumgebung. 6. Die Suche nach Planetensystemen. III. Intelligentes Leben im Universum. 7. Demographie außerirdischer Zivilisationen. 8. Soziologie außerirdischer Zivilisationen. 9. UFO's und Besuche in der Vergangenheit. 10. Strategien bei der Suche nach außerirdischen Zivilisationen. 11. Die Suche nach künstlichen Signalen. 12. Die Diskussion innerhalb der Gesellschaft. 13. Die Stellung des Menschen im Universum.

  7. Die drool and die drool theory

    NASA Astrophysics Data System (ADS)

    Schmalzer, A. M.; Giacomin, A. Jeffrey

    2013-04-01

    When molten plastic is extruded from a die, it sometimes collects on the open face of the die. Known as die drool, this phenomenon costs plastics manufacturers by requiring die cleaning. This has been attributed to many causes, but none of these has led to an equation for the drool rate. In this work we provide an exact analytical solution for the drool rate, and we base this solution on a postulate of a cohesive slip layer near the die walls. We thus attribute die drool to cohesive failure within the fluid at an internal surface where the fluid slips on itself. We adimensionalize the drool rate with the production rate, and call this the build up ratio, BR. We provide an exact analytical solution for BR when the cohesive slip layer either sticks at the wall. We examine the slit geometry corresponding to sheet or film extrusion.

  8. Einsteins Traum. Expeditionen an die Grenzen der Raumzeit.

    NASA Astrophysics Data System (ADS)

    Hawking, S. W.

    This book is a German translation, by H. Kober, of the English original "Black holes and baby universes and other essays" published in 1993. It is a collection of articles written by the author between 1976 and 1992. Contents: 1. Kindheit. 2. Oxford und Cambridge. 3. Meine Erfahrung mit ALS. 4. Öffentliche Einstellungen zur Wissenschaft. 5. Eine kurze Geschichte der Kurzen Geschichte. 6. Mein Standpunkt. 7. Einsteins Traum. 8. Der Ursprung des Universums. 9. Die Quantenmechanik Schwarzer Löcher. 10. Schwarze Löcher und Baby-Universen. 11. Ist alles vorherbestimmt? 12. Die Zukunft des Universums. 13. Desert Island Discs, ein Interview.

  9. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  10. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1984-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  11. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1982-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  12. Packaged die heater

    SciTech Connect

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

  13. HIGH PRESSURE DIES

    DOEpatents

    Wilson, W.B.

    1960-05-31

    A press was invented for subjecting specimens of bismuth, urania, yttria, or thoria to high pressures and temperatures. The press comprises die parts enclosing a space in which is placed an electric heater thermally insulated from the die parts so as not to damage them by heat. The die parts comprise two opposed inner frustoconical parts and an outer part having a double frustoconical recess receiving the inner parts. The die space decreases in size as the inner die parts move toward one another against the outer part and the inner parts, though very hard, do not fracture because of the mode of support provided by the outer part.

  14. Matthias Falter und die frühe Halbleitertechnik in der DDR

    NASA Astrophysics Data System (ADS)

    Dittmann, Frank

    Nach einer ganzen Reihe von Vorarbeiten weltweit1 konnten im Dezember 1947 die amerikanischen Physiker Walter H. Brattain, John Bardeen und William Shockley in den Bell Laboratories den Transistoreffekt demonstrieren. Damit legten sie den Grundstein für die Mikroelektronik als Basistechnologie des Informationszeitalters.

  15. Die singulation method

    SciTech Connect

    Swiler, Thomas P; Garcia, Ernest J; Francis, Kathryn M

    2014-01-07

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  16. Die singulation method

    SciTech Connect

    Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

    2013-06-11

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  17. Einfluss des Internets auf das Informations-, Einkaufs- und Verkehrsverhalten

    NASA Astrophysics Data System (ADS)

    Nerlich, Mark R.; Schiffner, Felix; Vogt, Walter

    Mit Daten aus eigenen Erhebungen können das einkaufsbezogene Informations- und Einkaufsverhalten im Zusammenhang mit den verkehrlichen Aspekten (Distanzen, Verkehrsmittel, Wegekopplungen) dargestellt werden. Die Differenzierung in die drei Produktkategorien des täglichen, mittelfristigen und des langfristigen Bedarfs berücksichtigt in erster Linie die Wertigkeit eines Gutes, die seine Erwerbshäufigkeit unmittelbar bestimmt. Der Einsatz moderner IKT wie das Internet eröffnet dem Endverbraucher neue Möglichkeiten bei Information und Einkauf. Die verkehrliche Relevanz von Online-Shopping wird deutlich, wenn man berücksichtigt, dass im Mittel rund 17% aller Online-Einkäufe, die die Probanden durchgeführt haben, Einkäufe in Ladengeschäften ersetzen. Dies gilt in verstärktem Maße für Online-Informationen: etwa die Hälfte hätte alternativ im stationären Einzelhandel stattgefunden. Da der Erwerb von Gütern des täglichen Bedarfs häufig nahräumlich und in relevantem Anteil nicht-motorisiert erfolgen kann, sind in diesem Segment - im Gegensatz zum mittel- und langfristigen Bedarf - nur geringe Substitutionseffekte zu beobachten.

  18. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-04-26

    A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

  19. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the opportunity to close important…

  20. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  1. Die Soldering in Aluminium Die Casting

    SciTech Connect

    Han, Q.; Kenik, E.A.; Viswanathan, S.

    2000-03-15

    Two types of tests, dipping tests and dip-coating tests were carried out on small steel cylinders using pure aluminum and 380 alloy to investigate the mechanism of die soldering during aluminum die casting. Optical and scanning electron microscopy were used to study the morphology and composition of the phases formed during soldering. A soldering mechanism is postulated based on experimental observations. A soldering critical temperature is postulated at which iron begins to react with aluminum to form an aluminum-rich liquid phase and solid intermetallic compounds. When the temperature at the die surface is higher than this critical temperature, the aluminum-rich phase is liquid and joins the die with the casting during the subsequent solidification. The paper discusses the mechanism of soldering for the case of pure aluminum and 380 alloy casting in a steel mold, the factors that promote soldering, and the strength of the bond formed when soldering occurs. conditions, an aluminum-rich soldering layer may also form over the intermetallic layer. Although a significant amount of research has been conducted on the nature of these intermetallics, little is known about the conditions under which soldering occurs.

  2. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  3. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

  4. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  5. Grundsätze über die Anlagen neuer Sternwarten mit Beziehung auf die Sternwarte der Universität Göttingen. Von Georg Heinrich Borheck

    NASA Astrophysics Data System (ADS)

    Beuermann, Klaus; Borheck, Georg Heinrich

    Die Göttinger Sternwarte, Wirkungsstätte des berühmten Gelehrten Carl Friedrich Gauß, ist ein bedeutendes Baudenkmal. Im Jahre 2005 wird sie gemeinsam von der Georg-August-Universität und der Akademie der Wissenschaften zu Göttingen renoviert, um dann als repräsentatives Gebäude der Universität und Arbeitsstätte der Akademie zu dienen. Die Nutzung der historischen Räume für Ausstellungen macht diesen imposanten Bau erstmals der Öffentlichkeit zugänglich. Die Sternwarte war bei ihrer Errichtung vor 200 Jahren ein nach seinerzeit neuesten wissenschaftlichen Erkenntnissen konzipierter Bau, der die Universität Göttingen in eine der vordersten Stellen Europa rückte. Auch aufgrund ihrer Architektur ist sie ein großer Wurf des Göttinger Universitätsbaumeisters Georg Heinrich Borheck. Durch die Kriegswirren der Napoleonischen Zeit zerschlug sich Borhecks Versuch einer Publikation seiner Beschreibung des Baus der Göttinger Sternwarte 1805. Doch seine Schrift ist auch heute noch aktuell und wird mit diesem Band erstmals einer breiten Öffentlichkeit zugängig gemacht. Er zeigt die Grundsätze, nach denen damals öffentliche Bauten konzipiert wurden, erläutert die Bedeutung des Baus aus kunst- und wissenschaftshistorischer Sicht und informiert über die Pläne zur Restaurierung der Sternwarte in einem separaten Beitrag und im Geleitwort des Präsidenten der Georg-August Universität Prof. Dr. Dr. h. c. Kurt von Figura.

  6. Die grünende IT - Wie die Computerindustrie das Energiesparen neu erfand

    NASA Astrophysics Data System (ADS)

    von Greiner, Wilhelm

    Die IT-Branche hat ihr grünes Gewissen entdeckt. In der jetzigen Verbreitung und Intensität ist dieses Phänomen noch recht neu - lange Zeit schien die Informationstechnik in puncto Umweltverträglichkeit und Energieverbrauch eine "weiße Weste" zu haben. Schließlich läuft ein PC mit Strom und nicht mit - sagen wir mal - einem Dieselmotor: Beim Booten eines Computers schießt nicht erst eine dunkelgraue Rauchwolke aus dem Auspuff, die Lärmerzeugung beschränkt sich auf das Surren des Lüfters, zum Tanken fahren muss man mit ihm auch nicht, und die Produktion der Komponenten erfolgt… ja, wo eigentlich? Irgendwo in der "dritten Welt", in Fernost oder in Mexiko. So sind die umweltschädlichen Aspekte der Produktion von Leiterplatten und sonstigen Bauteilen aus den Augen, aus dem Sinn und bestenfalls sporadisch Gegenstand eines kritischen Greenpeace-Berichts1, der im Überangebot der Medienlandschaft untergeht.

  7. Die Zeitung der Zukunft

    NASA Astrophysics Data System (ADS)

    Wieser, Christoph; Schaffert, Sebastian

    Schon lange wird spekuliert, wie wir in Zukunft Zeitung lesen werden. Werden wir am Frühstückstisch wie gewohnt in einer Zeitung aus Papier schmökern oder werden wir die Zeitung als biegsame Folie beschrieben mit elektronischer Tinte in Händen halten? Wird die Zeitung mit anderen Medien wie Radio und Fernsehen verschmelzen? Viele Varianten sind denkbar. Heute lässt sich schon ein Trend ablesen: Immer mehr Leser entdecken die Online-Zeitung als Informationsmedium, eine Voraussetzung für die Nutzung neuer Technologien in der Zeitung der Zukunft. In diesem Kapitel stellen wir Entwicklungsmöglichkeiten der Online-Zeitung dar, wie sie im Social Semantic Web möglich werden.

  8. When Somebody Dies

    MedlinePlus

    ... alguien muere All living things — including bugs and fish and people — die. It's difficult, even for grownups, ... kind of death for families and friends to deal with because it happens so fast. There is ...

  9. Des Moines.

    ERIC Educational Resources Information Center

    Gore, Deborah, Ed.

    1988-01-01

    This document, intended for elementary students, contains articles and activities designed to acquaint young people with the history of Des Moines, Iowa. The articles are short, and new or difficult words are highlighted and defined for young readers. "The Raccoon River Indian Agency" discusses the archeological exploration of the indian…

  10. Organisation des gesundheitlichen Verbraucherschutzes auf Bundesebene

    NASA Astrophysics Data System (ADS)

    Tschiersky-Schöneburg, Helmut; Büttner, Antje

    Zahlreiche Krisen wie Dioxin belastete Futtermittel, die missbräuchliche Verwendung von Antibiotika in der Schweinemast und nicht zuletzt das Auftreten von BSE in Deutschland erschütterten Ende der neunziger Jahre das Vertrauen der Bürger in die Sicherheit der Lebensmittel. Mit dem Weißbuch zur Lebensmittelsicherheit, das im Januar 2000 herausgegeben wurde, hatte die Europäische Kommission ihre Erfahrungen aus dem BSE-Geschehen in ein neues Konzept für den Verbraucherschutz eingearbeitet. Kernstücke des Konzepts sind die ganzheitliche Betrachtung der Lebensmittelsicherheit von der landwirtschaftlichen Erzeugung bis zum Verzehr und der Anspruch nach Transparenz und Unabhängigkeit der Risikobewertung.

  11. Über die Methode der physikalischen Naturbeschreibung [33

    NASA Astrophysics Data System (ADS)

    Wenn es zu den Aufgaben der Philosophie und der wissensehaftlicher Theologie gehört, das Warum und Wie unserer Existenz und ihrer Umwelt zu ergründen, so muss als ihr Ausgangspunkt eine vollständige und möglichst übersichtliche Beschreibung unserer Empfindungen vorliegen. Einen Teil dieser Empfindungen fassen wir unter dem Namen Sinnesempfindungen zusammen. Ob ein solcher Aussehnitt genau abgegrenzt werden kann, soll hier nicht untersucht werden. Es kann sogar mit gewisser Berechtigung behauptet werden, dass eine Unterteilung gar nicht streng durchführbar ist. Der schon in der Philosophie der Antike uns entgegentretende Gedanke, dass die Welt nur in ihrer Gesamtheit rerständlich sein kann, kommt sicherlich der Wahrheit näher als die philosophischen Systeme des verflossenen Jahrhunderts, welche glaubten, dass alies aus unseren materialistischen Erkenntnissen heraus erklärt werden könne. Die Entstehung dieser Systeme, ich denke z. Â. an den Monisimis Haeckels, erklärt sich aus der Hybris, welche die Reaktion der Philosophie auf die bedeutenden Erfolge der exakten Naturwissenschaften war. Die ebenfalls nicht zu imterschätzenden Fortschritte unserer heutigen Kenntnisse auf diesem Gebiete zwingen din Naturforschung eher zu einer immer steigenden Bescheidenheit den "Welträtseln" gegenüber, deren letzte Konsequenz vielleicht darin liegen wird, dass sie die eingangs der Philosophie und Theologie zugewiesene Aufgabe als unlosbar bezeichnen muss..

  12. Data-Mining für die Angebotsoptimierung im Handel

    NASA Astrophysics Data System (ADS)

    Garcke, Jochen; Griebel, Michael; Thess, Michael

    Der Handel ist weltweit durch gravierenden Wettbewerbsdruck gekennzeichnet. Deutschland gilt im Einzelhandel sogar als der wettbewerbsintensivste Markt der Welt. Um in diesem Wettbewerb zu bestehen, vertrauen die meisten Händler auf extensive Formen ungezielten Massenmarketings. Hierbei werden alle potentielle Kunden mit den gleichen riesigen Katalogen, ungezählten Werbebroschüren, aufdringlichen Lautsprecherdurchsagen und schrillen Bannerwerbungen bearbeitet. Im Ergebnis sind nicht nur die Kunden genervt, sondern auch die Rücklaufraten von Marketingkampagnen seit Jahren fallend. Um dies zu vermeiden, ist eine Individualisierung des Massenmarketings empfehlenswert, in der Kunden auf sie zugeschnittene, individuelle Angebote erhalten. Die Aufgabe besteht darin, dem richtigen Kunden zum richtigen Zeitpunkt zum richtigen Preis das richtige Angebot zu unterbreiten. Dies stellt sich primär als eine mathematische Aufgabenstellung heraus, die die Bereiche Statistik, Optimierung, Analysis und Numerik betrifft. Die hierbei auftretenden Aufgabenstellungen der Regressionsanalyse, des Clusterings und der Optimalen Steuerung sind durch hohe Dimensionen und riesige Datenmengen gekennzeichnet und erfordern neue mathematische Konzepte und Verfahren.

  13. Einfluss der Korrosion auf die Schirmdämpfung versilberter Gestricke und Gewebe

    NASA Astrophysics Data System (ADS)

    Tasser, M.; Wehnert, G.

    2007-06-01

    Zur Abschirmung elektromagnetischer Strahlung werden unter anderem metallisierte Gestricke eingesetzt, die versilbertes Polyamid enthalten. Solche Materialien finden beispielsweise Anwendungen als flexible Verpackungen oder als Strumpfmaterialien im medizinischen Bereich, z.B. bei der Therapie des Phantomschmerzes. Versilbertes Polyamid ist dem korrosiven Angriff schwefelhaltiger Verbindungen ausgesetzt, welche die Schirmdämpfungswirkung aufgrund der Ausbildung von Silbersulfidschichten herabsetzen. Untersucht wurde, inwieweit Silbersulfidbildung die Schirmdämpfung beeinträchtigt und ob die Silbersulfidbildung durch Schutzschichten aus Titandioxid (TiO2) verhindert werden kann. Die Silbersulfidschichten wurden mit Hilfe einer alkalischen Natriumsulfid-Lösung (Tuccillo-Nielsen-Lösung) hergestellt. Titandioxid-Schichten wurden durch ein Sol-Gel-Verfahren abgeschieden. Die untersuchten versilberten Gestricke zeigten im Bereich von 300 MHz bis 4 GHz eine weitgehend konstante Schirmdämpfung von ca. 40 dB, abhängig von der Strickart. Durch Belegung der Oberfläche mit Silbersulfid nahm die Schirmdämpfung auf ca. 5-10 dB ab. Dünne, durch Sol-Gel-Verfahren abgeschiedene TiO2 -Schichten verhinderten nicht die Ausbildung von Silbersulfidschichten. Durch Reduktion des Silbersulfids mit Aluminium in Natriumchlorid-Lösung konnte die Schirmdämpfung teilweise wiederhergestellt werden, was sich an einem Anstieg der Schirmdämpfung auf ca. 25 dB zeigte.

  14. N-to-One-Provisionierung zwischen internen Satellitenverzeichnissen des IntegraTUM-Metadirectory

    NASA Astrophysics Data System (ADS)

    Boursas, Latifa

    Dieser Beitrag beschreibt und analysiert die Synchronisationslösungen zur Verwaltung von Benutzerdaten, die Konnektoren aus verschiedenen Quellsystemen und zwischen Verzeichnisdiensten übertragen müssen. Der Schwerpunkt dieser Analyse liegt dabei auf den Transformationen, die zwei Datenmodelle mit unterschiedlichen Strukturen des Directory Information Tree (DIT) innerhalb des IntegraTUM-Metadirectory miteinander abgleichen. Besonders herausfordernd ist, diesen Abgleich mittels des Novell DirXML-Treibers zu realisieren, weil das DirXML-Datenmodell für die Synchronisation der LDAP-Objekte auf eins zu eins Synchronisation ausgelegt ist. In diesem Beitrag wird unsere Lösung für die Synchronisation mehreren LDAP-Objekte auf ein einziges Objekt detailliert und ihre Integrierbarkeit in anderen Hochschulen vorgestellt.

  15. Issues with dying patients.

    PubMed

    Valent, P

    1978-04-22

    Doctors have the privilege of looking after patients from the moment of birth to the moment of death. Yet, the holistic approach to patients is interfered with by the doctor's role as a warrior against death, where death's everpresent claim on our lives, and its final victory, are ignored. This paper attempts to explore why doctors are in their current position, the mechanisms for ignoring death which are shared by doctors and patients, the nature of the fear of death, and practical implications for the treatment of dying patients. More and more patients die now in medical settings. It is incumbent on doctors to understand the dying process, if much unnecessary suffering is to be prevented. PMID:661717

  16. Experiences of the dying.

    PubMed

    Schoenbeck, Susan L

    2011-01-01

    It is often a mystery to us how we have come to know and believe in certain things. Beliefs are like guests who come up to a door. They come in only if the host opens it and invites them in. Otherwise they are turned away, unable to enter. LPNs/LVNs are invited to reflect on their experiences and expand their knowledge and beliefs. There is growing recognition that bedside talks of the dying, spirit travel and near-death events are real events for the people who experience them. LPNs/ LVNs are encouraged to expand their knowledge and beliefs about dying. PMID:23252027

  17. Assisted Dying in Canada.

    PubMed

    Schuklenk, Udo

    2014-01-01

    This paper makes an affirmative ethical case in favour of the decriminalization of assisted dying in Canada. It then proceeds to defending the affirmative case against various slippery-slope arguments that are typically deployed by opponents of assisted dying. Finally, a recent case of questionable professional conduct by anti-euthanasia campaigners cum academics is flagged as a warning to all of us not to permit the quality of the professional debate to deteriorate unacceptably, despite the personal emotional investments involved on all sides of the debate. PMID:26871530

  18. Poetry and the Dying.

    ERIC Educational Resources Information Center

    Kramer, Aaron

    1992-01-01

    Demonstrates roles poetry can play as people confront the death of loved ones and their own dying. Gives examples of Heinrich Heine transforming his agony into art and, from the poetry of two college students, both in advanced stages of neurological disease, which was read aloud in class, teaching all present something about how to approach their…

  19. Tool & Die Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 23 units to consider for use in a tech prep competency profile for the occupation of tool and die technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

  20. When a Baby Dies.

    ERIC Educational Resources Information Center

    Church, Martha Jo; And Others

    Written especially for grieving mothers whose babies have died, this booklet offers an overview of stages and experiences through which bereaved parents commonly pass. Specifically, the text is intended to give comfort to bereaved parents, offer insight into the grieving process, and provide thoughts on leave-taking ceremonies. The first section…

  1. Der neue Kosmos. Einführung in die Astronomie und Astrophysik

    NASA Astrophysics Data System (ADS)

    Unsöld, Albrecht; Baschek, Bodo

    Der neue Kosmos bietet in überschaubarem Umfang eine zusammenhängende Einführung in das Gesamtgebiet der Astronomie und Astrophysik. Aus den Bereichen: Klassische Astronomie und Planetensystem, Instrumente und Beobachtungsverfahren, Sonne und Sterne, Milchstraße und Galaxien, Kosmologie, Entstehung des Planetensystems, Entwicklung der Erde und des Lebens werden die Beobachtungsmethoden und die Ergebnisse astronomischer Forschung sowie deren theoretische Grundlagen und wechselseitigen Zusammenhänge vermittelt. Die aktualisierte 7. Auflage berücksichtigt den raschen Fortschritt astronomischer Forschung der letzten drei Jahre von unserem Planetensystem und den Entdeckungen zahlreicher Planeten bei anderen Sternen, über die fernsten Galaxien und Quasare bis zur Entwicklung der modernen Kosmologie.

  2. Magnetisches Tracking für die Navigation mit dem da Vinci® Surgical System

    NASA Astrophysics Data System (ADS)

    Nickel, Felix; Wegner, Ingmar; Kenngott, Hannes; Neuhaus, Jochen; Müller-Stich, Beat P.; Meinzer, Hans-Peter; Gutt, Carsten N.

    In dieser Studie wurde untersucht ob in einem typischen OP-Aufbau mit dem da Vinci® Telemanipulator elektromagnetisches Tracking für die Realisation eines Navigationssystems eingesetzt werden kann. Hierfür wurde in einem realen OP-Aufbau untersucht, wie stark metallische und ferromagnetisch wirksame Objekte wie Operationstisch und Telemanipulator das elektromagnetische Feld des Trackingsystems beeinflussen. Die Ergebnisse zeigen, dass der Telemanipulator nur unwesentlich die Störung des Magnetfeldes durch den OP-Tisch verstärkt. Insbesondere die Bewegung der Instrumente im Trackingvolumen verursachte keine zusätzliche relevante Störung des Magnetfeldes. Bei Begrenzung des Trackingvolumens auf eine Länge von 190 mm, Höhe von 200mm und Breite von 400 mm war der maximale Fehler in diesem Bereich an allen Messpunkten kleiner 10 mm. Der Einsatz von elektromagnetischem Tracking für die Navigation mit dem da Vinci® Surgical System ist somit in einem begrenzten Arbeitsvolumen mit hinreichender Genauigkeit möglich.

  3. Navigating "Assisted Dying".

    PubMed

    Schipper, Harvey

    2016-02-01

    Carter is a bellwether decision, an adjudication on a narrow point of law whose implications are vast across society, and whose impact may not be realized for years. Coupled with Quebec's Act Respecting End-of-life Care it has sharply changed the legal landscape with respect to actively ending a person's life. "Medically assisted dying" will be permitted under circumstances, and through processes, which have yet to be operationally defined. This decision carries with it moral assumptions, which mean that it will be difficult to reach a unifying consensus. For some, the decision and Act reflect a modern acknowledgement of individual autonomy. For others, allowing such acts is morally unspeakable. Having opened the Pandora's Box, the question becomes one of navigating a tolerable societal path. I believe it is possible to achieve a workable solution based on the core principle that "medically assisted dying" should be a very rarely employed last option, subject to transparent ongoing review, specifically as to why it was deemed necessary. My analysis is based on 1. The societal conditions in which have fostered demand for "assisted dying", 2. Actions in other jurisdictions, 3. Carter and Quebec Bill 52, 4. Political considerations, 5. Current medical practice. Leading to a series of recommendations regarding. 1. Legislation and regulation, 2. The role of professional regulatory agencies, 3. Medical professions education and practice, 4. Public education, 5. Health care delivery and palliative care. Given the burden of public opinion, and the legal steps already taken, a process for assisted-dying is required. However, those legal and regulatory steps should only be considered a necessary and defensive first step in a two stage process. The larger goal, the second step, is to drive the improvement of care, and thus minimize assisted-dying. PMID:27169205

  4. Modeling the Mechanical Performance of Die Casting Dies

    SciTech Connect

    R. Allen Miller

    2004-02-27

    The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

  5. Creatio ex zero. Ursprungs-Konzepte in der mathematischen Naturphilosophie des 19. Jahrhunderts.

    NASA Astrophysics Data System (ADS)

    Heuser, M.-L.

    Die Autorin zeigt in ihrem Beitrag, daß Ansätze der heutigen Selbstorganisationstheorien, die diese in Richtung einer vereinheitlichten dynamischen Theorie verallgemeinern wollen, zumindest in konzeptueller Hinsicht, schon in der Mathematik und Naturphilosophie des 19. Jahrhunderts gewisse Vorläufer finden könnten.

  6. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  7. Psychotherapy with Older Dying Persons.

    ERIC Educational Resources Information Center

    Dye, Carol J.

    Psychotherapy with older dying patients can lead to problems of countertransference for the clinician. Working with dying patients requires flexibility to adapt basic therapeutics to the institutional setting. Goals of psychotherapy must be reconceptualized for dying clients. The problems of countertransference arise because clinicians themselves…

  8. Die Metamorphose des Polypen von Tripedalia cystophora (Cubozoa, Carybdeidae) in die Meduse

    NASA Astrophysics Data System (ADS)

    Werner, B.

    1983-09-01

    The life cycle of the Cubozoa is unique due to the complete metamorphosis of the sessible solitary polyp into one single medusa which starts a pelagic way of life. Contrary to the other metagenetic classes of Scyphozoa and Hydrozoa, the cubozoan polyp terminates its polypoid existence definitely when it metamorphosizes. Generally, the metamorphosis of the cubopolyp is characterized by the transformation of its simple, sac-like multiradial body into the tetraradial structures of the much more complicated medusa. The macroscopic phases of the metamorphosis of Tripedalia cystophora Conant are reviewed, and the internal developmental processes which effect and underlie the transformation are described in detail from new histological investigations. Only the oral pole of the polyp is involved in the active processes of transformation whereas the basal pole follows in a more passive way. The most important process is the invagination of a quadrangular furrow around the hypostome of the polyp by which (a) the subumbrellar room (bell cavity) of the developing medusa is formed, and (b) the four gastric pockets within the wall of the bell are folded off from the polyp's simple stomach. The description of the metamorphosis on the whole and the detailed comparison of the principal developmental processes provide evidence that medusa formation of Cubozoa is different from that of the other metagenetic classes of Scyphozoa and Hydrozoa. The systematic and evolutionary consequences as well as general aspects of medusa formation in the phylum Cnidaria are discussed in detail. In conclusion, the pelagic medusa generation has been “invented” by the ancestors of the recent metagenetic cnidarian classes three times independently.

  9. Nitriding of Aluminum Extrusion Die: Effect of Die Geometry

    NASA Astrophysics Data System (ADS)

    Akhtar, S. S.; Arif, A. F. M.; Yilbas, B. S.

    2010-04-01

    Nitriding of complex-shaped extrusion dies may result in non-uniform nitride layers and hence a required hardness may not be achieved in some regions of the bearing area. The present study is carried out to assess the effect of extrusion die profile on the characteristics and growth behavior of nitride layers so that the critical die design feature can be identified to enhance the uniformity of the nitride layer. For this purpose, AISI H13 steel samples have been manufactured with profiles similar to those of hot extrusion dies. The samples were then gas nitrided under controlled nitriding potential. The uniformity and depth of nitride layers have been investigated in terms of compound layer and total nitride case depth for selected die features. The results of this study indicated the need to include the effect of profile on the nitride layer for the optimal die design with improved service life.

  10. Sind die klassischen Methoden zur mykologischen Diagnostik noch "State-of-the-Art"?

    PubMed

    Wiegand, Cornelia; Bauer, Andrea; Brasch, Jochen; Nenoff, Pietro; Schaller, Martin; Mayser, Peter; Hipler, Uta-Christina; Elsner, Peter

    2016-05-01

    Die Labordiagnose einer Pilzinfektion der Haut basiert traditionell auf dem Nativpräparat und der Anzucht des Erregers aus dem klinischen Material. Auch der dermato- histologischer Nachweis von Pilzelementen ist möglich. Diese Methoden sind, sofern sie korrekt ausgeführt werden, in der Regel zum Pilznachweis geeignet. Im Zuge der personalisierten Medizin und den daraus erwachsenden Aufgaben werden jedoch neue Verfahren erforderlich, welche einfach, spezifisch und schnell sind. Der zusätzliche Einsatz von DNA-basierten molekularen Methoden erhöht die Empfindlichkeit sowie die diagnostische Spezifität und reduziert die zum Teil wochenlange Durchführungszeit der konventionellen mykologischen Diagnostik auf 24 bis 48 Stunden. Im Zuge der stetigen Weiterentwicklung im Bereich der personalisierten Medizin sind einfache Analysensysteme auf PCR-Basis denkbar, die in der Hautarztpraxis eine Dermatophyten-Sofort-Diagnostik erlauben (Point-of-Care-Tests). PMID:27119469

  11. Accurate defect die placement and nuisance defect reduction for reticle die-to-die inspections

    NASA Astrophysics Data System (ADS)

    Wen, Vincent; Huang, L. R.; Lin, C. J.; Tseng, Y. N.; Huang, W. H.; Tuo, Laurent C.; Wylie, Mark; Chen, Ellison; Wang, Elvik; Glasser, Joshua; Kelkar, Amrish; Wu, David

    2015-10-01

    Die-to-die reticle inspections are among the simplest and most sensitive reticle inspections because of the use of an identical-design neighboring-die for the reference image. However, this inspection mode can have two key disadvantages: (1) The location of the defect is indeterminate because it is unclear to the inspector whether the test or reference image is defective; and (2) nuisance and false defects from mask manufacturing noise and tool optical variation can limit the usable sensitivity. The use of a new sequencing approach for a die-to-die inspection can resolve these issues without any additional scan time, without sacrifice in sensitivity requirement, and with a manageable increase in computation load. In this paper we explore another approach for die-to-die inspections using a new method of defect processing and sequencing. Utilizing die-to-die double arbitration during defect detection has been proven through extensive testing to generate accurate placement of the defect in the correct die to ensure efficient defect disposition at the AIMS step. The use of this method maintained the required inspection sensitivity for mask quality as verified with programmed-defectmask qualification and then further validated with production masks comparing the current inspection approach to the new method. Furthermore, this approach can significantly reduce the total number of defects that need to be reviewed by essentially eliminating the nuisance and false defects that can result from a die-to-die inspection. This "double-win" will significantly reduce the effort in classifying a die-to-die inspection result and will lead to improved cycle times.

  12. Die Struktur von schlankem Materialfluss mit Lean Production Kanban und Innovationen

    NASA Astrophysics Data System (ADS)

    Scheid, Wolf-Michael

    In der Literatur wird Materialfluss überwiegend in Spezialdisziplinen betrachtet, etwa der Steuerungslogik, der Logistiktechnik oder dem Supply Chain Management. Ein charakterisierendes Merkmal des Materialflusses ist jedoch, dass er sich aus vielfältigen Einzelbausteinen zusammensetzt, die alle harmonisch abgestimmt sein müssen. Die maximal erreichbare Effizienz wird nicht durch Höchstleistungen in dem einen oder anderen Spezialthema bestimmt, sondern durch das schwächste Glied im gesamten komplexen Netzwerk. Den Schnittstellen zwischen den betroffenen Fachbereichen in einem Unternehmen kommt hier eine ganz besondere Bedeutung zu: Erst ein harmonischer Einklang ermöglicht hohe Effektivität. Dies setzt umfassendes Verständnis für interdisziplinäre Notwendigkeiten, ein hohes Maß an Abstimmung mit den operativen Prozessen und letztlich einen einvernehmlichen Umgang und den Respekt vor den Problemstellungen des Anderen voraus.

  13. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  14. KomTronic® - Aktorische Werkzeugsysteme für die Einsatzerweiterung von Standard-Bearbeitungszentren

    NASA Astrophysics Data System (ADS)

    Fronius, Jürgen

    Die Entwickler spanender Fertigungssysteme stehen seit geraumer Zeit unter erhöhtem Innovationsdruck. Neben dem entscheidenden Aspekt der Stückkosten spielt das gesteigerte Umweltbewusstsein eine zunehmende Rolle. Die aktuelleKrise des Kreditwesens tut ein Übriges um den Forderungen nach geringen Investitionskosten und damit geringem Kreditbedarf oder erhöhter Flexibilität zur Kosteneinsparung bei Serienumstellung, geringem Energiebedarfund ressourcenschonendem Betrieb neuen Nachdruck zu verschaffen. Auf genau diesen Forderungskatalog wurde die KomTronic® - Produktpalette zugeschnitten. Ausgangspunkt war die Flexibilität die besonders bei komplexen, asymmetrischen Bauteilen eine Herausforderung darstellt. Quaderförmige Bauteile wie Hydraulikventilblöcke oder Zylinderköpfe von Verbrennungsmotoren stellen in ihrer Kombination aus Fräs- Drehbearbeitungen die "Königsklasse“ der spanenden Fertigung dar. Die Lösungen, besonders für die Drehkonturen sind im Allgemeinen großserientauglich ausgelegt. Die Konsequenz sind bauteilbezogen ausgelegte Transferstrassen oder Rundtaktmaschinen, eine Kombination dieser Bearbeitungen auf einem flexiblen BAZ waren bislang nicht möglich.

  15. Foreigners dying in Istanbul.

    PubMed

    Uzun, Ibrahim; Celbis, Osman; Baydar, Cetin Lutfi; Alkan, Nevzat; Arslan, Murat Nihat

    2009-09-01

    The study included 411 deaths selected from 14,647 medicolegal deaths autopsied in the Morgue Department of Forensic Medicine Institute Directorate, affiliated with the Ministry of Justice, between 1998 and 2002. Data were collected from court documents, coroner's investigation reports, and autopsy reports. The parameters of age, gender, nationality and origin, cause and place of death in foreigners dying in Istanbul were evaluated in the study. Out of 14,647 medicolegal deaths, 3.5% were foreigners from 34 different nationalities. The nationality with the highest rate of foreigner deaths (34%) was Romanian. Out of 411 deaths, 74.3% were male and 25.7% were female. Of all cases, 64.4% were tourists visiting Istanbul and 35.6% had a job in Istanbul. Of 146 foreigners employed in Istanbul, 94.5% did not have a work permit, while only 5.5% had a work permit. PMID:19674242

  16. Two Piece Compaction Die Design

    SciTech Connect

    Coffey, Ethan N

    2010-03-01

    Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the

  17. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  18. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  19. Adapt or die?

    PubMed

    Visser, S S; Nel, A H

    1996-12-01

    The worldwide economic recession and the concomitant limited stock of finances have had an influence on the available money of every household and have also inhibited the improvement of socio-economic conditions and medicine. The Reconstruction and Development Programme (RDP) has the objective of improving the living conditions of the people with regard to housing, education, training and health care. The latter seems to be a major problem which has to be addressed with the emphasis on the preventive and promotional aspects of health care. A comprehensive health care system did not come into being property in the past because of the maldistribution of health care services, personnel and differences in culture and health care beliefs and values. The question that now arises, is how to render a quality health care service within the constraints of inadequate financing and resources. A comprehensive literature study has been done with reference to quality health care and financing followed by a survey of existing health services and finances. Recommendations are made about minimum requirements to be accepted if one were to adapt rather than die in terms of the provision of healthcare: the decentralization and rationalization of the administration of health care, the stress on and realization of effective and efficient primary health care, the acceptance of participative management in health providing organizations, the provision of financial management training for health care managers and the application of management accounting principles for the improvement of the efficiency and effectiveness of management. PMID:9283343

  20. Dying and multiplying life.

    PubMed

    Rodríguez-Arias, David

    2014-09-01

    It was only after James P. Lovette's death, in 2006, that I discovered that the twenty-four-year-old colleague and friend with whom I had spent so many afternoons debating issues in organ transplantation had been the first successful child heart transplantee in the world and one of the longest-living survivors of a second transplant. During the years we met, he never even hinted at the fact that three different hearts had beaten in his chest. The revelation that his life had been an almost uninterrupted chain of medical challenges suddenly made me appreciate his quirkiness in a whole new light. Organ transplantation crudely exemplifies a traditional moral dilemma between means and ends: in order to save a life, someone else has to die. Bioethicists involved in this field have the role of identifying the ethical issues surrounding organ donation and helping others to argue in an intelligible and convincing way. In my view, bioethicists have the obligation to foster a discussion as open and transparent as possible on these matters. Still, I sometimes fear that I may be helping to cause unnecessary harms to potential recipients who are desperately waiting for a vital organ. Scholars would be chillingly cold if their quest for truth systematically came at the cost of lives lost. Every life can be meaningful and provide meaning to many others. This is true even with organ recipients, who often have short lives full of considerable suffering. PMID:25231665

  1. Beginn des Studiums

    NASA Astrophysics Data System (ADS)

    Domnick, Ivonne

    Ihr Herz schlägt für die Naturwissenschaften? Die Arbeitsmarktaussichten sind gut. Das Studium einer der vier MINT-Disziplinen ist daher eine gute Investition in die Zukunft. Wie Sie erfolgreich in das Studium starten, erfahren Sie auf den folgenden Seiten.

  2. Die Bedeutung der Volumen- und Oberflächeneigenschaften von Biomaterialien für die Adsorption von Proteinen und nachfolgende zelluläre Reaktionen

    NASA Astrophysics Data System (ADS)

    Groth, Thomas

    2003-04-01

    Es ist schon seit längerer Zeit bekannt, dass nach Kontakt des Biomaterials mit der biologischen Umgebung bei Implantation oder extrakorporaler Wechselwirkung zunächst Proteine aus dem umgebenden Milieu adsorbiert werden, wobei die Oberflächeneigenschaften des Materials die Zusammensetzung der Proteinschicht und die Konformation der darin enthaltenden Proteine determinieren. Die nachfolgende Wechselwirkung von Zellen mit dem Material wird deshalb i.d.R. von der Adsorbatschicht vermittelt. Der Einfluss der Oberflächen auf die Zusammensetzung und Konformation der Proteine und die nachfolgende Wechselwirkung mit Zellen ist von besonderem Interesse, da einerseits eine Aussage über die Anwendbarkeit ermöglicht wird, andererseits Erkenntnisse über diese Zusammenhänge für die Entwicklung neuer Materialien mit verbesserter Biokompatibilität genutzt werden können. In der vorliegenden Habilitationsschrift wurde deshalb der Einfluss der Zusammensetzung von Polymeren bzw. von deren Oberflächeneigenschaften auf die Adsorption von Proteinen, den Aktivitätszustand der plasmatischen Gerinnung und die Adhäsion von Zellen untersucht. Dabei wurden auch Möglichkeiten zur Beeinflussung dieser Vorgänge über eine Veränderung der Volumenzusammensetzung oder durch Oberflächenmodifikationen von Biomaterialien vorgestellt. Erkenntnisse aus diesen Arbeiten konnten für die Entwicklung von Membranen für Biohybrid-Organe genutzt werden. The implantation of biomaterials or the contact of blood with extracorporal devices leads to the rapid adsorption of proteins from the surrounding biological fluids. The surface properties of materials determine the composition of the adsorption layer and the conformation of adsorbed proteins. Hence, the subsequent interaction of cells with biomaterials is dependent on the adsorption layer of proteins. The detailed knowledge on the role of surface properties in protein adsorption and cellular interactions is a useful means to learn about the

  3. What Happens When Someone Dies?

    MedlinePlus

    ... and sleepiness Mental confusion Constipation or incontinence Nausea Refusal to eat or drink Each of these symptoms, ... having a "non-hospital DNR" (see Understanding Health Care Decisions ) if the person is dying at home. ...

  4. REFRACTORY DIE FOR EXTRUDING URANIUM

    DOEpatents

    Creutz, E.C.

    1959-08-11

    A die is presented for the extrusion of metals, said die being formed of a refractory complex oxide having the composition M/sub n/O/sub m/R/sub x/O/sub y/ where M is magnesium, zinc, manganese, or iron, R is aluminum, chromic chromium, ferric iron, or manganic manganese, and m, n, x, and y are whole numbers. Specific examples are spinel, magnesium aluminate, magnetite, magnesioferrite, chromite, and franklinite.

  5. Improving care of dying children.

    PubMed Central

    Martinson, I M

    1995-01-01

    Every year about 5,000 children aged 0 to 14 years need hospice care in the United States. Children seem to know that they are dying, although this is difficult for parents to accept. Clear, empathic understanding is needed. Communication with clarity and understanding is imperative with the changes in goals from cure to palliation to comfort. The ideal place for most dying children is at home, where symptoms can be managed as effectively as in a hospital. PMID:7571589

  6. Wirkungen biogener Amine auf die Erregungs-Sekretions-Kopplung in der Speicheldrüse von Periplaneta americana (L.)

    NASA Astrophysics Data System (ADS)

    Rietdorf, Katja

    2003-07-01

    In der vorliegenden Arbeit habe ich wichtige Teilmechanismen der Erregungs-Sekretionskopplung in der Speicheldrüse der Schabe Periplaneta americana (L.) untersucht. Die Speicheldrüse ist von dopaminergen und serotonergen Fasern innerviert (Baumann et al., 2002). Beide Transmitter stimulieren eine unterschiedliche Reaktion der Drüse: Dopamin (DA) stimuliert die P-Zellen der Acini und die Ausführgangzellen, während Serotonin (5-HT) die P- und C-Zellen der Acini stimuliert, nicht jedoch die Ausführgangzellen. Der Endspeichel ist nach einer DA-Stimulierung proteinfrei. Dagegen enthält er nach einer 5-HT-Stimulierung Proteine, die von den C-Zellen sezerniert werden (Just & Walz, 1996). Im ersten Teil meiner Arbeit habe ich mittels Kapillarelektrophoretischer Analyse (CE-Analyse) die Elektrolytkonzentrationen im Endspeichel untersucht sowie die Raten der Flüssigkeitssekretion gemessen. Damit wollte ich klären, welche Transporter an der Sekretion des Primärspeichels und an dessen Modifikation beteiligt sind. Ausserdem wollte ich die Rolle der transportaktiven Epithelzellen der Ausführgänge für die Modifikation des Primärspeichels untersuchen. Dafür habe ich einen Vergleich der Elektrolytkonzentrationen im DA- und 5-HT-stimulierten Endspeichel durchgeführt. Der Elektrolytgehalt des DA- und 5-HT-stimulierten Endspeichels unterscheidet sich nicht signifikant voneinander. Er ist nach beiden Stimulierungen hypoosmotisch zum verwendeten Ringer. Die Ausführgangzellen werden durch DA stimuliert und modifizieren den Primärspeichel durch eine netto-Ionenreabsorption. Meine Versuche zeigen jedoch, dass auch die während einer 5-HT-Stimulierung der Drüse unstimulierten Ausführgangzellen den Primärspeichel modifizieren. In einer nachfolgenden Versuchsreihe habe ich den Einfluss von Ouabain, einem Hemmstoff der Na+-K+-ATPase, und Bumetanid, einem Hemmstoff des NKCC, auf die Raten der Flüssigkeitssekretion sowie den Elektrolytgehalt des Endspeichels untersucht. Ich

  7. Elektrische Phänomene des Körpers und ihre Detektion

    NASA Astrophysics Data System (ADS)

    Bolz, Armin; Kikillus, Nicole; Moor, Claudius

    Im menschlichen Körper verfügen sowohl Nerven- als auch Muskelzellen über die Eigenschaft, intra- und extrazelluläre Ionenkonzentrationen zu verschieben und damit die Potenzialverteilung in ihrer Umgebung zu beeinflussen. Über unterschiedliche Synchronisationsverfahren sind makroskopische Zellverbände zusätzlich in der Lage, koordiniert ihre Felder zu verändern und somit auch signifikante, an der Körperoberfläche messbare elektrische Signale zu erzeugen. Das vorliegende Kapitel beschreibt zunächst die elektrophysiologischen Grundlagen elektrischer Signale des menschlichen Körpers, die Synchronisationsmechanismen und die daraus entstehenden Felder, insbesondere das Elektrokardiogramm (EKG), das Elektroenzephalogramm (EEG) sowie das Elektromyogramm (EMG). Im Anschluss daran werden die wesentlichen Grundlagen der Messtechnik zur Erfassung bioelektrischer Phänomene erläutert. Einige Beispielapplikationen runden diesen Beitrag ab.

  8. Die Deutsche Statistische Gesellschaft in der Weimarer Republik und während der Nazidiktatur

    NASA Astrophysics Data System (ADS)

    Wilke, Jürgen

    Nach anfänglichen Schwierigkeiten durch den 1. Weltkrieg erlangte die Deutsche Statistische Gesellschaft (DStatG) unter dem renommierten Statistiker und Vorsitzenden der DStatG, Friedrich Zahn, durch eine Vielzahl von Aktivitäten hohes Ansehen. Es gab Bestrebungen, Statistiker aus allen Arbeitsfeldern der Statistik in die DStatG zu integrieren, wobei die "Mathematische Statistik" nur zögerlich akzeptiert wurde (Konjunkturforschung, Zeitreihenanalyse). Nach der Machtübernahme 1933 durch Adolf Hitler geriet die DStatG in das Fahrwasser nationalsozialistischer Ideologie und Politik (Führerprinzip, Gleichschaltung des Vereinswesens). Damit war eine personelle Umstrukturierung in der DStatG verbunden. Politisch Missliebige und rassisch Verfolgte mussten die DStatG verlassen (Bernstein, Freudenberg, Gumbel u.a.). Unter den Statistikern gab es alle Abstufungen im Verhalten zum Regime von Ablehnung und zwangsweiser Anpassung über bereitwilliges Mitläufertum bis zu bewusster Täterschaft. Besonders die Bevölkerungsstatistik wurde durch die NS- Rassenpolitik auf lange Sicht diskreditiert. Im Rahmen von Wirtschaftsplanung und Aufrüstung wurden neue zukunftsträchtige statistische Modelle (Grünig, Bramstedt, Leisse) entwickelt.

  9. Verfahrenstechnische Grundlagen des Coatings

    NASA Astrophysics Data System (ADS)

    Mörl, Lothar

    Die Ummantelung von Feststoffteilchen mit Hüllsubstanzen hat in verschiednen Industriezweigen in der letzten Zeit an Bedeutung gewonnen. Eine wichtige Ursache dafür dürfte in den immer höheren Anforderungen begründet sein, die an Feststoffformulierungen gestellt werden. Neben den hohen Ansprüchen an die Rezepturgenauigkeit wird es immer interessanter, die Freisetzung bestimmter in den Feststoffformulierungen enthaltener Wirkstoffe voraussagen zu können. So ist es zum Beispiel insbesondere in der pharmazeutischen Industrie von entscheidender Bedeutung, wann und unter welchem Milieu die in einer Tablette oder in einem Dragee enthaltenen Wirkstoffe freigesetzt werden und wie schnell diese Freisetzung geschieht. Aber auch in anderen Industriezweigen wie z. B. der Landwirtschaft können durch die Ummantelung von pflanzlichen Samen (Samenpillierung) mit Herbiziden, Fungiziden, Wachstumsstimulatoren, Düngemitteln und anderen Substanzen erhebliche Effekte bei der Einsparung von Schädlingsbekämpfungsmitteln und beim Schutz der Keimlinge bei gleichzeitiger Optimierung der Gestalt der Samenpille erreicht werden. Auch die Entwicklung von sphärisch aufgebauten Düngemittelgranulaten mit definierter Wirkstofffreisetzung und optimalen Eigenschaften der Partikel für die Ausbringung in der Landwirtschaft ist auf diese Art möglich. Auch in der Nahrungs- und Genussmittelindustrie lassen sich eine Reihe von Anwendungsgebieten nennen, wie zum Beispiel die Kandierung von Bohnenkaffe, die Verkapselung von Vitaminen u. a [1].

  10. Use of RSP Tooling to Manufacture Die Casting Dies

    SciTech Connect

    Kevin McHugh

    2004-07-01

    The technology and art used to construct die casting dies has seen many improvements over the years. However, the time lag from when a design is finalized to the time a tool is in production has remained essentially the same. The two main causes for the bottleneck are the need to qualify a part design by making prototypes (usually from an alternative process), and the production tooling lead time after the prototypes are approved. Production tooling costs are high due to the labor and equipment costs associated with transforming a forged block of tool steel into a finished tool. CNC machining, sink EDM, benching, engraving and heat treatment unit operations are typically involved. As a result, there is increasing interest in rapid tooling (RT) technologies that shorten the design-to-part cycle and reduce the cost of dies. There are currently more than 20 RT methods being developed and refined around the world (1). The "rapid" in rapid tooling suggests time compression for tool delivery, but does not address robustness as nearly all RT approaches are intended for low-volume prototype work, primarily for molding plastics. Few options exist for die casting. An RT technology suitable for production-quality tooling in the time it normally takes for prototype tooling is highly desirable. In fact, there would be no need for a distinction between prototype and production tooling. True prototype parts could be made using the same processing conditions and materials intended for production. Qualification of the prototype part would allow the manufacturer to go directly into production with the same tool. A relatively new RT technology, Rapid Solidification Process (RSP) Tooling, is capable of making production-quality tooling in an RT timeframe for die casting applications. RSP Tooling, was developed at the Idaho National Engineering and Environmental Laboratory (INEEL), and commercialized with the formation of RSP Tooling, LLC (2). This paper describes the process, and

  11. Newtons Universum. Materialien zur Geschichte des Kraftbegriffes.

    NASA Astrophysics Data System (ADS)

    Mit einem Vorwort von E. Seibold und einer Einführung von W. Neuser. This book is a selection of 15 articles published in the journal "Spektrum der Wissenschaft". The original English versions of the papers were first published in "Scientific American". Contents: 1. Impetustheorie und Intuition in der Physik (M. McCloskey). 2. Mittelalterliche Ursprünge der industriellen Revolution (T. S. Reynolds). 3. Leonardo da Vincis Beiträge zur theoretischen Mechanik (V. Foley, W. Soedel). 4. Nikolaus Kopernikus und Tycho Brahe (O. Gingerich). 5. Keplers Entdeckung der ersten beiden Planetengesetze (C. Wilson). 6. Galileis Entdeckung des Fallgesetzes (S. Drake). 7. Galileis Beobachtung des Neptun (S. Drake, C. T. Kowal). 8. Galileo Galilei und der Schatten des Giordano Bruno (L. S. Lerner, E. A. Gosselin). 9. Der Fall Galilei (O. Gingerich). 10. Newtons Apfel und Galileis "Dialog" (S. Drake). 11. Newtons Gravitationsgesetz - aus Formeln wird eine Idee (I. B. Cohen). 12. Christopher Wren: Astronom und Architekt (H. Dorn, R. Mark). 13. Atomismus und Kräfte in der Geschichte (L. Holliday). 14. Ein Elitezirkel vor 200 Jahren: Die Lunar Society von Birmingham (L. Ritchie-Calder). 15. Sadi Carnot: Technik und Theorie der Dampfmaschine (S. S. Wilson).

  12. Acting to let someone die.

    PubMed

    McGee, Andrew

    2015-02-01

    This paper examines the recent prominent view in medical ethics that withdrawing life-sustaining treatment (LST) is an act of killing. I trace this view to the rejection of the traditional claim that withdrawing LST is an omission rather than an act. Although that traditional claim is not as problematic as this recent prominent view suggests, my main claim is that even if we accepted that withdrawing LST should be classified as an act rather than as an omission, it could still be classified as letting die rather than killing. Even though omissions are contrasted with acts, letting die need not be, for one can let die by means of acts. The remainder of the paper is devoted to establishing this claim and addresses certain objections to it. PMID:24320715

  13. Clinical management of dying patients.

    PubMed Central

    Gavrin, J; Chapman, C R

    1995-01-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts. PMID:7571591

  14. 'Die Zeit' im Konversationsunterricht ('Die Zeit' in a Conversation Class)

    ERIC Educational Resources Information Center

    Becker-Cantarino, Barbel

    1975-01-01

    The German weekly newspaper "Die Zeit" contains a very rich variety of topics and is therefore an inexhaustable source for an exciting conversation class. This article outlines and lists the advantages of a German conversation course organized around this newspaper. (Text is in German.) (TL)

  15. Portable punch and die jig

    DOEpatents

    Lewandowski, Edward F.; Anderson, Petrus A.

    1978-01-01

    A portable punch and die jig includes a U-shaped jig of predetermined width having a slot of predetermined width in the base thereof extending completely across the width of the jig adapted to fit over the walls of rectangular tubes and a punch and die assembly disposed in a hole extending through the base of the jig communicating with the slot in the base of the jig for punching a hole in the walls of the rectangular tubes at precisely determined locations.

  16. Dying radio galaxies in clusters

    NASA Astrophysics Data System (ADS)

    Murgia, M.; Parma, P.; Mack, K.-H.; de Ruiter, H. R.; Fanti, R.; Govoni, F.; Tarchi, A.; Giacintucci, S.; Markevitch, M.

    2011-02-01

    Aims: We present a study of five "dying" nearby (z ≤ 0.2) radio galaxies belonging to both the WENSS minisurvey and the B2 bright catalogs WNB1734+6407, WNB1829+6911, WNB1851+5707, B2 0120+33, and B2 1610+29. Methods: These sources have been selected on the basis of their extremely steep broad-band radio spectra, which strongly indicates that either these objects belong to the rare class of dying radio galaxies or we are observing "fossil" radio plasma remaining from a previous instance of nuclear activity. We derive the relative duration of the dying phase from the fit of a synchrotron radiative model to the radio spectra of the sources. Results: The modeling of the integrated spectra and the deep spectral index images obtained with the VLA confirmed that in these sources the central engine has ceased to be active for a significant fraction of their lifetime, although their extended lobes have not yet completely faded away. We found that WNB1851+5707 is in reality composed of two distinct dying galaxies, which appear blended together as a single source in the WENSS. In the cases of WNB1829+6911 and B2 0120+33, the fossil radio lobes are seen in conjunction with a currently active core. A very faint core is also detected in a MERLIN image of WNB1851+5707a, one of the two dying sources composing WNB1851+5707. We found that all sources in our sample are located (at least in projection) at the center of an X-ray emitting cluster. Conclusions: Our results suggest that the duration of the dying phase for a radio source in a cluster can be significantly higher than that of a radio galaxy in the field, although no firm conclusions can be drawn because of the small number statistics involved. The simplest interpretation of the tendency for dying galaxies to be found in clusters is that the low-frequency radio emission from the fading radio lobes lasts longer if their expansion is somewhat reduced or even stopped. Another possibility is that the occurrence of dying

  17. Des ballons pour demain

    NASA Astrophysics Data System (ADS)

    Régipa, R.

    A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

  18. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  19. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  20. Integrated Forming Simulations and Die Structural Analysis for Optimal Die Designs

    NASA Astrophysics Data System (ADS)

    Aitharaju, Venkat; Liu, Malcolm; Dong, Jennifer; Zhang, Jimmy; Wang, Chuan-tao

    2005-08-01

    After gaining a huge success in applying stamping simulations and formability analysis to validate die face developments, GM moves forward to winning total manufacturability in stamping process. Of which, ensuring die structure integrity and minimizing weight is one of the important initiatives. Stamping die design (or solid modeling of stamping dies) was traditionally conducted by following the die design manuals and standards. For any design changes beyond the standards, however, there are no math-based tools available to die designers to verify the outcome of the changes. Die structural analysis (DSA) provides a math-tool to validate the design changes and quantify the safety factors. Several years ago, GM Manufacturing Engineering — Die Center started die structural analysis to meet the increasing demands of customer needs in various areas: (1) to validate design changes; (2) to identify root cause of die breakage during the tryout and stamping operations and propose repair schemes; (3) to optimize the die design for weight reduction; (4) to improve press throughput via optimizing the scrap chute openings, and (5) to provide a math-based tool to validate revisions to the current die design standards. In the integrated forming and die structural analysis, after successful line die surface developments, the forming loads (binder force, pad force, and forming tonnages) are extracted from forming simulations and applied to solid die members for structural analyses of stress, strains, and deflections. In the past few years, Die Center conducted static, dynamic and fatigue analysis for many dies that covers the die design changes requested by die design, die construction and stamping plants. This paper presents some fundamentals and issues of integrated forming and die structural analysis and illustrates the significant impact of die structural analysis on die design, die construction and production stamping.

  1. Amputation des quatre membres

    PubMed Central

    Feruzi, Maruis Kitembo; Milindi, Cédrick Sangwa; Zabibu, Mireille Kakinga; Mulefu, Jules Panda; Katombe, Francois Tshilombo

    2014-01-01

    Les auteurs présentent les cas d'amputation des quatre membres réalisée chez trois patients différents. Ce sont des amputations réalisées pour chaque patient au cours d'une seule hospitalisation et en un seul temps opératoire. Deux patients pour gangrène sèche infectée et un pour amputation traumatique des quatre membres. L'amputation d'urgence a été pratiquée en premier temps suivie de remodelage des moignons d'amputation en second temps. L’évolution de tous les patients a été bonne. PMID:25469177

  2. Exploratory study on H13 steel dies

    SciTech Connect

    Sunwoo, A.J.

    1994-04-01

    Ultrahigh-strength H13 steel is a recommended die material for aluminum die casting; dies made from H13 steel can be safely water- cooled during hot working operations without cracking. However, after time the dies exhibited surface cracking and excessive wear. Erosive wear also occurs owing to high pressure injection of molten Al. An exploratory study was made of the causes for surface cracking of H13 dies. Results suggest that surface cracking is caused by interrelated factors, internal to the die material as well as externally induced conditions.

  3. The thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The effects of welding, five selected surface coatings, and stress relieving on the thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies were studied using eleven thermal fatigue specimens. Stress relieving was conducted after each 5,000 cycle interval at 1050 F for three hours. Four thermal fatigue specimens were welded with H-13 or maraging steel welding rods at ambient and elevated temperatures and subsequently, subjected to different post-weld heat treatments. Crack patterns were examined at 5,000, 10,000, and 15,000 cycles. The thermal fatigue resistance is expressed by two crack parameters which are the average maximum crack and the average cracked area. The results indicate that a significant improvement in thermal fatigue resistance over the control was obtained from the stress-relieving treatment. Small improvements were obtained from the H-13 welded specimens and from a salt bath nitrogen and carbon-surface treatment. The other surface treatments and welded specimens either did not affect or had a detrimental influence on the thermal fatigue properties of the H-13 die steel.

  4. „Überholen ohne einzuholen“ Die Entwicklung von Technologien für übermorgen in Kernenergie und Mikroelektronik der DDR

    NASA Astrophysics Data System (ADS)

    Barkleit, Gerhard

    Dem nuklearen Patt zwischen Ostblock und westlichem Staatenbündnis ist es nach weitgehend übereinstimmender Auffassung von Politik und Wissenschaft zu danken, dass der "Kalte Krieg" in der zweiten Hälfte des 20. Jahrhunderts nicht zum weltumfassenden Flächenbrand eskalierte. An der raschen Herstellung dieses Patts waren zwei Dresdner Physiker maßgeblich beteiligt, deren einer im Manhattan-Projekt in den USA gearbeitet hatte und später in England der Spionage für die Sowjetunion und des Verrats des Know-how der Atombombe überführt wurde.

  5. Guide for extrusion dies eliminates straightening operation

    NASA Technical Reports Server (NTRS)

    Gyorgak, C. A.; Hoover, R. J.

    1964-01-01

    To prevent distortion of extruded metal, a guidance assembly is aligned with the die. As the metal emerges from the extrusion dies, it passes directly into the receiver and straightening tube system, and the completed extrusion is withdrawn.

  6. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing. PMID:25080714

  7. Killing, letting die and euthanasia.

    PubMed

    Husak, D N

    1979-12-01

    Medical ethicists debate whether or not the moral assessment of cases of euthanasia should depend on whether the patient is 'killed' or 'allowed to die'. The usual presupposition is that a clear distinction between killing and letting die can be drawn so that this substantive question is not begged. I contend that the categorisation of cases of instances of killing rather than as instances of letting die depends in part on a prior moral assessment of the case. Hence is it trivially rather than substantively true that the distinction has moral significance. But even if a morally neutral (ie non-question begging) distinction could be drawn, its application to the euthanasia controversy is problematic. I illustrate the difficulties of employing this distinction to reach moral conclusions by critically discussing Philippa Foot's recent treatment of euthanasia. I conclude that even if an act of euthanasia is an instance of killing, and there exists a prima facie moral duty not to kill, and no more stringent duty overrides this duty, one still cannot determine such an act to be morally impermissible. PMID:541821

  8. Adolescents’ Perceived Risk of Dying

    PubMed Central

    Fischhoff, Baruch; de Bruin, Wändi Bruine; Parker, Andrew M.; Millstein, Susan G.; Halpern-Felsher, Bonnie L.

    2009-01-01

    Purpose Although adolescents’ expectations are accurate or moderately optimistic for many significant life events, they greatly overestimate their chances of dying soon. We examine here whether adolescents’ mortality judgments are correlated with their perceptions of direct threats to their survival. Such sensitivity would indicate the importance of ensuring that adolescents have accurate information about those threats, as well as the psychological support needed to deal with them. Methods Data from two separate studies were used: a national study of 3,436 14–18 year old adolescents and a regional sample of 124 7th graders and 132 9th graders, 12–16 years old. Participants were asked about their chance of dying in the next year and before age 20, and about the extent of various threats to their physical well being. Results Adolescents in both samples greatly overestimated their chance of dying. Those mortality estimates were higher for adolescents who reported direct threats (e.g., an unsafe neighborhood). Thus, adolescents were sensitive to the relative size of threats to their survival, but not to the implications for absolute risk levels. Conclusions Contrary to the folk wisdom that adolescents have a unique sense of invulnerability, those studied here reported an exaggerated sense of mortality, which was highest among those reporting greater threats in their lives. Such fears could affect adolescents’ short-term well being and future planning. PMID:20159504

  9. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  10. Jewish tradition in death and dying.

    PubMed

    Ross, H M

    1998-10-01

    Death is often a spiritually difficult time for the dying and their families. Judaism approaches dying with some unique views that can differ from other religious traditions. Through an understanding of Jewish tradition, nurses can ease the dying process for Jewish patients and their families. PMID:10036429

  11. Finanzierung des Studiums

    NASA Astrophysics Data System (ADS)

    Domnick, Ivonne

    "Das liebe Geld“ - ein Thema, das Sie durch das ganze Studium begleitet und auch in der Examensphase und bei der späteren Berufswahl eine entscheidende Rolle spielen wird. Naturwissenschaftler und Ingenieure haben auf dem Arbeitsmarkt sicher derzeit die Nase vorn und brauchen sich über ihre berufliche Zukunft nicht so große Gedanken machen. Doch vor der Karriere muss zunächst einmal eine sichere Studienfinanzierung auf die Beine gestellt werden.

  12. Sitzungsberichte der Heidelberger Akademie der Wissenschaften> " Jahrgang 1990 Sitzungsber.Heidelberg 90 " "Gott hat die Natur einfältig gemacht, sie aber suchen viel Künste"

    NASA Astrophysics Data System (ADS)

    Zehe, Horst

    Der Aufsatz demonstriert anhand ausgiebig kommentierter zeitgenössischer Zeugnisse Goethes Reaktion auf die Arbeiten Fraunhofers, insbesondere auf die Entdeckung der dunklen Linien im Sonnenspektrum. Den Fehlurteilen Goethes werden dabei die Urteile zeitgenössischer Physiker wie Chladni und J.F.W. Herschel gegenübergestellt. Bislang noch ungedruckte Dokumente aus dem Weimarer Goethe- und Schiller-Archiv belegen, daß sich Goethe nicht nur literarisch mit Fraunhofer beschäftigte, sondern daß er auch dessen Versuche mit Hilfe des Jenaer Universitätsmechanikers Körner getreulich zu wiederholen suchte.

  13. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

  14. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  15. Des Vents et des Jets Astrophysiques

    NASA Astrophysics Data System (ADS)

    Sauty, C.

    well expected result from the theory. Although, collimation may be conical, paraboloidal or cylindrical (Part 4), cylindrical collimation is the more likely to occur. The shape of outflows may then be used as a tool to predict physical conditions on the flows or on their source. L'éjection continue de plasma autour d'objets massifs est un phénomène largement répandu en astrophysique, que ce soit sous la forme du vent solaire, de vents stellaires, de jets d'étoiles en formation, de jets stellaires autour d'objets compacts ou de jets extra-galactiques. Cette zoologie diversifiée fait pourtant l'objet d'un commun effort de modélisation. Le but de cette revue est d'abord de présenter qualitativement le développement, depuis leur origine, des diverses théories de vents (Partie 1) et l'inter disciplinarité dans ce domaine. Il s'agit d'une énumération, plus ou moins exhaustive, des idées proposées pour expliquer l'accélération et la morphologie des vents et des jets, accompagnée d'une présentation sommaire des aspects observationnels. Cette partie s'abstient de tout aspect faisant appel au formalisme mathématique. Ces écoulements peuvent être décrits, au moins partiellement, en résolvant les équations magnétohydrodynamiques, axisymétriques et stationnaires. Ce formalisme, à la base de la plupart des théories, est exposé dans la Partie 2. Il permet d'introduire quantitativement les intégrales premières qu'un tel système possède. Ces dernières sont amenées à jouer un rôle important dans la compréhension des phénomènes d'accélération ou de collimation, en particulier le taux de perte de masse, le taux de perte de moment angulaire ou l'énergie du rotateur magnétique. La difficulté de modélisation réside dans l'existence de points critiques, propres aux équations non linéaires, qu'il faut franchir. La nature physique et la localisation de ces points critiques fait l'objet d'un débat important car ils sont la clef de voute de la r

  16. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  17. Die singulation method and package formed thereby

    SciTech Connect

    Anderson, Robert C.; Shul, Randy J.; Clews, Peggy J.; Baker, Michael S.; De Boer, Maarten P.

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  18. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  19. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  20. Should assisted dying be legalised?

    PubMed Central

    2014-01-01

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion “This House Would Legalise Assisted Dying”. This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework. PMID:24423249

  1. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  2. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  3. The Right To Die. Public Talk Series.

    ERIC Educational Resources Information Center

    Pasquerella, Lynn

    This program guide on the right to die provides policy issue information where ethical concerns have a prominent place. Three positions about the right to die are presented: (1) mercy killing and assisted suicide should be legally permitted in certain cases; (2) legal status should be given to living wills and other advance directives that would…

  4. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  5. Assisted dying: a review of international legislation.

    PubMed

    Field, Charlotte; Curtice, Martin

    2009-05-01

    The issue of assisted dying in the UK is increasingly receiving media and academic journal attention. Such reporting often cites, but in little depth, existing legislation in other countries. Such international legislation may also shape future UK assisted dying legislation. PMID:19451872

  6. Apparatus for restraining and transporting dies

    DOEpatents

    Allison, James W.; LaBarre, Timothy L.

    1994-01-01

    Apparatus for restraining and transporting dies in punch press operations is provided. A floatation platen for supporting a die on the platen's upper surface has a plurality of recessed gas exhaust ports on the platen's lower surface. A source of pressurized gas delivers gas to a platen manifold, for delivery to orifices located in the gas exhaust ports. The flow of gas is controlled by a first valve adjacent the gas source and a second valve adjacent the manifold, with the second valve being used to control the gas flow during movement of the die. In this fashion, a die may be moved on a cushion of air from one workstation to a selected second workstation. A moveable hydraulically operated restraining fixture is also provided, for clamping the die in position during the compacting phase, and for releasing the die after completion of the compacting phase by releasing the hydraulic pressure on the restraining fixture. When pressure in the hydraulic cylinders on the restraining fixture is reversed, the restraining fixture will retract so that there is no contact between the die and the restraining fixture, thereby allowing the die to be removed from a first workstation and moved to a second selected workstation.

  7. Un mode de découverte inhabituel d'hyperparathyroïdie primaire: fractures multiples sur tumeurs brunes secondaires à un adénome parathyroïdien ectopique médiastinal

    PubMed Central

    Yassine, Asmaa; Guerboub, Ahmed Anas; Arsalane, Adil; Biyi, Abdelhamid; Moussaoui, Souad El; Belmejdoub, Ghizlaine

    2015-01-01

    La tumeur brune est une entité clinique bénigne apparaissant comme une manifestation squelettique rare de l'hyperparathyroïdie primaire. Il s'agit d'une cause inhabituelle de fractures pathologiques. Nous rapportons ici le cas clinique d'un patient âgé de 20 ans chez qui l'hyperparathyroïdie primitive a été découverte devant des tumeurs brunes multiples. PMID:26966486

  8. La tamponnade cardiaque: une manifestation rare de l'hypothyroïdie

    PubMed Central

    Arous, Salim; Ettaoumi, Youssef; Najih, Hayat; Makani, Said; Alami, Arroussi Aziz; Habbal, Rachida

    2015-01-01

    La survenue d'un épanchement péricardique au cours d'une hypothyroïdie est fréquente. Ce fait justifie la réalisation d'une échocardiographie lors du diagnostic et du suivi évolutif des hypothyroïdies. Les signes de mauvaise tolérance de cet épanchement sont rares et la constitution d'une tamponnade péricardique n'est que très rarement rapportée. Ce travail se base sur l’étude rétrospective de quatre cas de tamponnade cardiaque révélant une hypothyroïdie primaire. L’échocardiographie a permis de faire le diagnostic immédiat de la tamponnade. Orienté par l'aspect clinique, le diagnostic d'hypothyroïdie a été confirmé par dosage biologique. Le traitement a été à base de drainage péricardique chirurgical et d'hormonothérapie progressive, l’évolution a été favorable avec disparition de l’épanchement péricardique. Certaines particularités physiopathologiques, l'intérêt de l’échocardiographie et du drainage péricardique chirurgical, tant au plan diagnostique qu'au plan thérapeutique sont soulignés. PMID:26848351

  9. [Right to die with dignity?].

    PubMed

    Ruiz, Alvaro

    2008-06-01

    The right to die with dignity is an ill-defined concept, with multiple, often inappropriate, interpretations. The current proposition is that the physician take full responsibility for protecting the patients rights, for ensuring a rational use of resources and for overseeing the decision-making process such that the information is adequate and the steps proportioned. This responsibility extends not only to the health status of the patient situation, to the patients prognosis, and to his/her expectations and wishes, but also to the benefits foreseen and to the cost-benefit ratio. Emphasis is placed on two aspects of this relationship. First, dignity can be interpreted in many ways and sometimes, in the name of dignity, the patient is exposed (or exposes him/herself) to suffering, pain and complications that can be avoided. Second, when no reasonable probability of survival is present and a better quality of life is impossible, efforts are better redirected to offering a better quality of death. PMID:18719721

  10. Dying to go to school.

    PubMed

    Shearar, A

    1997-01-01

    In southern Sudan, the recent war sparked a mass migration of boys aged 5-18 who traveled through perilous terrain to the borders of Ethiopia in search of promised security and schooling. Thousands of these children died from hardships suffered in the wild, from the inadvertent or deliberate attacks of warriors, from hunger, from thirst, or from disease. Those who endured the hardships and arrived at their destination were shocked to find only military training centers or rudimentary schooling for those who were too weak or too young to be trained for battle. Eventually, the refugees were forced back into Sudan, and today about 20,000 of these unaccompanied children are displaced. Several nongovernmental organizations are running family reunification projects, and follow-up activities carried out among the reunified children reveal that they carry the scars of their trauma. The drawings the children produce as art therapy usually include the image of a young child holding a school book. While these children have a constant struggle with their memories, those who have not returned home or who have lost their families to war or disease are even more forlorn. As food rations have been halved in the refugee camps, many children are pursuing any possible alternative living arrangement. Some attempt to travel to South Africa or Egypt and some join an army in an effort to overcome the desperation of their present situation. PMID:12294200

  11. Reticulation des fibres lignocellulosiques

    NASA Astrophysics Data System (ADS)

    Landrevy, Christel

    Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

  12. "Das Konkrete ist das Abstrakte, an das man sich schließlich gewöhnt hat." (Laurent Schwartz) Über den Ablauf des mathematischen Verstehens

    NASA Astrophysics Data System (ADS)

    Lowsky, Martin

    Die im Titel genannte Aussage findet sich in den Lebenserinnerungen von Laurent Schwartz (1915-2002), einem der fruchtbarsten Mathematiker, Mitglied der Gruppe Bourbaki. Im Original lautet die Aussage: "un objet concret est un objet abstrait auquel on a fini par s'habituer." Schwartz erläutert sie am Beispiel des Integrals über {e^{-1/2{x^2}}} , das den Wert Wurzel aus 2π hat und in dem sich also die Zahlen e und π verknüpfen. Was Schwartz aber vor allem ausdrücken will, ist dies: Das mathematische Verständnisd geht langsam vor sich und es bedarf der Anstrengung. "Es ist eine Frage der Zeit und der Energie", sagt Schwartz, und gerade dies mache es so schwer, die höhere Mathematik unter das Volk zu bringen. Das Lernen und Lehren von Mathematik laufe eben mühevoll und langsam ab.

  13. Analyse des facteurs prédictifs de malignité des goitres nodulaires : à propos de 500 cas

    PubMed Central

    Bouaity, Brahim; Darouassi, Youssef; Chihani, Mehdi; Touati, Mohamed Mliha; Ammar, Haddou

    2016-01-01

    Les nodules thyroïdiens sont très fréquents et moins de 10% d'entre eux sont malin. Ils posent un véritable problème diagnostique et thérapeutique surtout par rapport à leur nature bénigne ou maligne. L’étude de certains facteurs cliniques et paracliniques de présomption de malignité permet de bien codifier la stratégie thérapeutique. Le but de ce travail est d’étudier les facteurs prédictifs de malignité des goitres nodulaires et comparer nos résultats à ceux de la littérature. Il s'agit d'une étude rétrospective à propos de 500 cas de goitres nodulaires opérés au service d'Oto-rhino-laryngologie (ORL) et Chirurgie cervico-faciale (CCF) de l'hôpital militaire Avicenne de Marrakech entre 2006 et 2012. Le pourcentage de cancers a été de 6,8%. L’âge moyen de nos patients était de 46 ans, avec une sex-ratio de 5 (F/H). A la palpation cervicale; le caractère dure du nodule a été constaté dans 94,4% des cas de cancer, avec des limites irrégulières dans 64,70% des cas de cancer. Trois nodules étaient fixes et ils étaient tous malins. Les adénopathies cervicales ont été constatées chez 8 malades dont 7 présentaient des cancers. A l’échographie, 61,8% des nodules malins présentaient un aspect hypoéchogène, avec des contours flous dans 88,24% des cas. La vascularisation intra nodulaire était présente dans 35,3% de ces cas des cancers avec des microcalcifications chez 55,9% d'entre eux. Le halo hypoéchogene périnodulaire était incomplet dans 73,5% des cas de cancer. Nos patients étaient en euthyroïdie dans 84,6% des cas. Les facteurs prédictifs de malignité d'un goitre nodulaire, étaient donc dans notre étude d'abord cliniques: l’âge supérieur à 60 ans, la consistance dure du nodule, sa fixité, son caractère irrégulier et mal limité à la palpation, ainsi que la présence d'adénopathie(s) cervicale(s) à l'examen; et échographiques: le caractère hypoéchogène, les limites floues, la présence de

  14. Solvent casting flow from slot die

    NASA Astrophysics Data System (ADS)

    Lee, Semi; Nam, Jaewook

    2015-11-01

    A continuous solvent casting method using a slot die can precisely control the film thickness by adjusting the operating conditions, such as the belt speed and pumping rate, not the liquid property. Therefore, it is a suitable method for high precision continuous film production. In this particular method, the dope, or casting solution, is pumped through the feed slot to form a short curtain between the die and the moving belt. Although this method is widely used in producing films for various applications, it is difficult to find indepth analyses of such flow. In this study, we developed a finite element computational model for the steady-state two-dimensional sovent casting flow from the slot die. The effect of die configurations, rheological properties and operating conditions on the behavior and shape of the gas/liquid interfaces and the location of the dynamic contact line, which is the place where the dope meets the moving belt, were investigated.

  15. Things to Do After Someone Dies

    MedlinePlus

    ... are usually hidden by clothing. What about organ donation? At some time before death or right after ... lungs, pancreas, kidneys, cornea, liver, and skin. Organ donation allows healthy organs from someone who dies to ...

  16. Reinforced ceramic dies for superplastic forming operations

    NASA Astrophysics Data System (ADS)

    Sanders, Daniel G.

    2004-12-01

    Ceramic dies have been developed to meet the need for a dimensionally stable tool, which can withstand the temperatures (425 to 950 °C) and high forming pressures (up to 7 MPa) that are required for superplastic forming (SPF), superplastic forming with diffusion bonding (SPF/DB), and hot sizing of metal parts. With the improvements that have been made to strengthen fused silica based ceramics, the performance of ceramic tools is slowly closing in on meeting the same forming complexity as corrosion-resistant steel (CRES) dies can achieve. Boeing has successfully superplastically formed jet engine wide chord fan blades using ceramic dies, and many production aircraft parts are being built with Boeing’s patented ceramic die technology.

  17. Casting Characteristics of Aluminum Die Casting Alloys

    SciTech Connect

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  18. Geobasisdaten für die Planung?

    NASA Astrophysics Data System (ADS)

    Zölitz-Möller, Reinhard

    2002-09-01

    Die Nutzer von Geobasisdaten der Vermessungs- und Katasterverwaltungen finden heute vor allem in ATKIS (Amtliches Topographisch-Kartographisches Informationssystem) und in der ALK (automatisiert geführte Liegenschaftskarte; hier noch eingeschränkt) flächendeckende und für eine Fachdatenintegration geeignete Geodatenbestände vor. Gleichwohl wird von Nutzerseite häufig ein differenziertes und in Teilen kritisches Bild gezeichnet. Die Kritik richtet sich v.a. auf die Probleme, die ATKIS-Anwender mit dem Nutzerkomfort, dem komplexen Datenmodell, unrichtigen Flächennutzungsangaben, inkompatiblen Objektdefinitionen, den Preisen sowie mangelnder Aktualität und Vollständigkeit haben. Dennoch gibt es für viele Zwecke auch in der Planung langfristig keine echte Alternative zu den Geobasisdaten.

  19. Die Anfaenge der Melker Bibliothek - Neue Erkenntnisse zu Handschriften und Fragmenten aus der Zeit vor 1200

    NASA Astrophysics Data System (ADS)

    Glaßner, Christine; Haidinger, Alois

    1996-04-01

    Shortly after Benedictine monks started monastic life in Melk in 1089 the scriptorium was flourishing under abbot Erchenfried (1121-1164). Noteworthy is Cod. 391, a manuscript written in its main part in 1123, but used by the monks as a yearbook with handwritten entries up to the 16th century. This manuscript was also an important source for the publication which dealt with the history of the scriptorium in 12th century. By examining the entries in this book the period of the activity of at least three unknwon writers in this era could be identified. It was the first time that not only the intact volumes but also the manuscripts preserved as fragments in the binding were examined. At the beginning of th 13th century the number of books held in the collection according to the result of this examination was 68. Another remarkable point of the exhibition and of the publication refering to the exhibition was Cod. 412, the oldest manuscript of the monastery, written in early 9th century and containing texts on natural sciences and astronomy by Venerable Bede. Three copies of this manuscript were done during 12th century, one of them probably in Melk, all of them with nearly identical consistency except the catalogue of signs of the zodiac which was ascribed erroneously to Venerable Bede in the Middle Ages: Vatican, Cod. Vat. lat. 643, Zwettl, Cod. 296 (copy of the Vatican manuscript), Klosterneuburg, Cod. 685 (copy of the Zwettl manuscript done in Klosterneuburg). Kurz nach Einführung der Benediktiner in Melk im Jahr 1089 erlebte das Melker Skriptorium unter Abt Erchenfried (1121-1163) seine erste Blüte. Hervorzuheben ist eine im Jahr 1123 angelegte Chronik, die bis in das 16. Jahrhundert durch Annaleneintragungen und andere wichtige Texte zur Geschichte des Klosters ergänzt wurde (Cod. 391). Diese Handschrift ist zugleich eine der wichtigsten Quellen zur Geschichte des Melker Skriptoriums im 12. Jahrhundert, dem sich die Publikation widmet. Mit Hilfe einer genaueren

  20. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  1. Thick film silicon growth techniques. [die materials

    NASA Technical Reports Server (NTRS)

    Bates, H. E.; Mlavsky, A. I.; Jewett, D. N.; White, V. E.

    1973-01-01

    The research which was directed toward finding an improved die material is reported. Wetting experiments were conducted with various materials to determine their compatibility with silicon. Work has also continued toward the development of quartz as a die material as new techniques have provided more optimistic results than observed in the past. As a result of the thermal modification previously described, improvements in growth stability have contributed to an increase in ribbon quality.

  2. Manufacture of die casting dies by hot isostatic pressing. CRADA final report

    SciTech Connect

    Viswanathan, S.; Ren, W.; Luk, K.; Brucher, H.G.

    1998-09-01

    The reason for this Cooperative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory (ORNL) and Doehler-Jarvis was to investigate the manufacture die-casting dies with internal water-cooling lines by hot-isostatic pressing (HIPing) of H13 tool steel powder. The use of HIPing will allow the near-net-shape manufacture of dies and the strategic placement of water-cooling lines during manufacture. The production of near-net-shape dies by HIPing involves the generation of HIPing diagrams, the design of the can that can be used for HIPing a die with complex details, strategic placement of water-cooling lines in the die, computer modeling to predict movement of the water lines during HIPing, and the development of strategies for placing water lines in the appropriate locations. The results presented include a literature review, particle analysis and characterization of H13 tool steel powder, and modeling of the HIPing process.

  3. Sitzungsberichte der Heidelberger Akademie der Wissenschaften¬Jahrgang 1990 Sitzungsber.Heidelberg 90¬"Gott hat die Natur einfältig gemacht, sie aber suchen viel Künste"

    NASA Astrophysics Data System (ADS)

    Zehe, Horst

    Der Aufsatz demonstriert anhand ausgiebig kommentierter zeitgenössischer Zeugnisse Goethes Reaktion auf die Arbeiten Fraunhofers, insbesondere auf die Entdeckung der dunklen Linien im Sonnenspektrum. Den Fehlurteilen Goethes werden dabei die Urteile zeitgenössischer Physiker wie Chladni und J.F.W. Herschel gegenübergestellt. Bislang noch ungedruckte Dokumente aus dem Weimarer Goethe- und Schiller-Archiv belegen, daß sich Goethe nicht nur literarisch mit Fraunhofer beschäftigte, sondern daß er auch dessen Versuche mit Hilfe des Jenaer Universitätsmechanikers Körner getreulich zu wiederholen suchte.

  4. Über die Möglichkeit der Zustandsvoraussage chaotischer Systeme

    NASA Astrophysics Data System (ADS)

    Leven, R. W.; Pompe, B.

    Deterministische chaotische Systeme reagieren empfindlich auf Störungen ihrer Bewegung. Kennt man im speziellen den Anfangszustand des Systems nicht exakt, so ist eine Voraussage über das zukünftige Verhalten des Systems nur beschränkt möglich. Die Transformation IT gibt an, wieviel Information man über einen zukünftigen Zustand hat, wenn man den Anfangszustand mit einer bestimmten Genauigkeit kennt.In dieser Arbeit werden weitere mögliche Interpretationen von IT in Hinblick auf die Beschreibung dynamischer Systeme gegeben. Für zwei einfache eindimensionale Abbildungen wird IT in Abhängigkeit von der Zeit der Voraussage (l) bestimmt: Ein System, das durch die BERNOULLI-Abbildung beschrieben wird, vergißt nach der ersten Iteration 1 bis 1,5 bit von seinem Anfangszustand. Vollständiges Vergessen tritt jedoch i. allg. erst für l ein. Bei der Logistik-Abbildung vergißt das System seinen Anfangszustand schneller, wenn der Grad des Chaos (d. h. der LJAPUNOV-Exponent) oder die äußeren Störungen zunehmen.Translated AbstractOn the Possibility of State Prediction of Chaotic SystemsDeterministic chaotic systems show a sensitive response to perturbations of their motion. In particular, if one has not exact knowledge about the initial state of the system, limits are set to the prediction of the system's future behaviour. The transinformation IT is the information obtainable about a future state, if one knows the initial state within a certain precision. In this paper further possible interpretations of IT are given with regard to the description of dynamic systems. IT is determined for different times of prediction (l) in the case of two simple one-dimensional maps: A system described by the BERNOULLI-map forgets after the first iteration 1 to 1.5 bit of its initial state. Nevertheless, in general we have complete loss of memory only for l . In the case of the logistic map the system forgets its initial state faster, if the

  5. Technische Systeme für den Herzersatz und die Herzunterstützung

    NASA Astrophysics Data System (ADS)

    Schöb, Reto; Loree, Howard M.

    Herzkrankheiten verursachen allein in den Vereinigten Staaten jährlich mehr als 700’000 Todesfälle. Ungefähr 3 Millionen Patienten in den U.S.A. leiden gemäss der American Heart Association (AHA) und dem National Heart, Lung and Blood Institute (NHLBI) an kongestivem Herzversagen (Congestive Heart Failure, CHF), welches eine chronische, sehr entkräftende und degenerative Krankheit ist: Das Herz ist dabei unfähig, hinreichend Blut zu den Organen des Körpers zu pumpen. Über 400’000 Fälle von CHF werden jedes Jahr diagnostiziert. Ähnliche Zahlen werden für Europa und Japan zusammen geschätzt. Basierend auf Daten vom AHA und NHLBI beträgt die fünfjährige Überlebensrate für CHF-Patienten lediglich etwa 50% [1]. 70’000-120’000 dieser Patienten könnten von einer Herzverpflanzung profitieren. 1999 wurden in den USA aber nur 2185 Herztransplantationen durchgeführt während die Warteliste über 4000 Patienten beträgt [2]. Ein akuter Mangel an Spenderherzen und die enormen Kosten (250’000-400’000 USD pro Patient) sind die begrenzenden Faktoren für Herztransplantationen [3]. Dies bedeutet, dass eine riesige Anzahl von Patienten durch ein zuverlässiges und verschleissfreies, nichtthrombotisches, total implantierbares, künstliches Herz gerettet werden könnten. Bis heute jedoch kein derartiges Implantat kommerziell verfügbar.

  6. Médecine des voyages

    PubMed Central

    Aw, Brian; Boraston, Suni; Botten, David; Cherniwchan, Darin; Fazal, Hyder; Kelton, Timothy; Libman, Michael; Saldanha, Colin; Scappatura, Philip; Stowe, Brian

    2014-01-01

    Résumé Objectif Définir la pratique de la médecine des voyages, présenter les éléments fondamentaux d’une consultation complète préalable aux voyages à des voyageurs internationaux et aider à identifier les patients qu’il vaudrait mieux envoyer en consultation auprès de professionnels de la médecine des voyages. Sources des données Les lignes directrices et les recommandations sur la médecine des voyages et les maladies liées aux voyages publiées par les autorités sanitaires nationales et internationales ont fait l’objet d’un examen. Une recension des ouvrages connexes dans MEDLINE et EMBASE a aussi été effectuée. Message principal La médecine des voyages est une spécialité très dynamique qui se concentre sur les soins préventifs avant un voyage. Une évaluation exhaustive du risque pour chaque voyageur est essentielle pour mesurer avec exactitude les risques particuliers au voyageur, à son itinéraire et à sa destination et pour offrir des conseils sur les interventions les plus appropriées en gestion du risque afin de promouvoir la santé et prévenir les problèmes médicaux indésirables durant le voyage. Des vaccins peuvent aussi être nécessaires et doivent être personnalisés en fonction des antécédents d’immunisation du voyageur, de son itinéraire et du temps qu’il reste avant son départ. Conclusion La santé et la sécurité d’un voyageur dépendent du degré d’expertise du médecin qui offre le counseling préalable à son voyage et les vaccins, au besoin. On recommande à ceux qui donnent des conseils aux voyageurs d’être conscients de l’ampleur de cette responsabilité et de demander si possible une consultation auprès de professionnels de la médecine des voyages pour tous les voyageurs à risque élevé.

  7. Celestial Fireworks from Dying Stars

    NASA Astrophysics Data System (ADS)

    2011-04-01

    This image of the nebula NGC 3582, which was captured by the Wide Field Imager on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile, shows giant loops of gas bearing a striking resemblance to solar prominences. These loops are thought to have been ejected by dying stars, but new stars are also being born within this stellar nursery. These energetic youngsters emit intense ultraviolet radiation that makes the gas in the nebula glow, producing the fiery display shown here. NGC 3582 is part of a large star-forming region in the Milky Way, called RCW 57. It lies close to the central plane of the Milky Way in the southern constellation of Carina (The Keel of Jason's ship, the Argo). John Herschel first saw this complex region of glowing gas and dark dust clouds in 1834, during his stay in South Africa. Some of the stars forming in regions like NGC 3582 are much heavier than the Sun. These monster stars emit energy at prodigious rates and have very short lives that end in explosions as supernovae. The material ejected from these dramatic events creates bubbles in the surrounding gas and dust. This is the probable cause of the loops visible in this picture. This image was taken through multiple filters. From the Wide Field Imager, data taken through a red filter are shown in green and red, and data taken through a filter that isolates the red glow characteristic of hydrogen are also shown in red. Additional infrared data from the Digitized Sky Survey are shown in blue. The image was processed by ESO using the observational data identified by Joe DePasquale, from the United States [1], who participated in ESO's Hidden Treasures 2010 astrophotography competition [2]. The competition was organised by ESO in October-November 2010, for everyone who enjoys making beautiful images of the night sky using astronomical data obtained using professional telescopes. Notes [1] Joe searched through ESO's archive and identified datasets that he used to compose his

  8. Towards a Dynamic DES model

    NASA Astrophysics Data System (ADS)

    Subbareddy, Pramod; Candler, Graham

    2009-11-01

    Hybrid RANS/LES methods are being increasingly used for turbulent flow simulations in complex geometries. Spalart's detached eddy simulation (DES) model is one of the more popular ones. We are interested in examining the behavior of the Spalart-Allmaras (S-A) Detached Eddy Simulation (DES) model in its ``LES mode.'' The role of the near-wall functions present in the equations is analyzed and an explicit analogy between the S-A and a one-equation LES model based on the sub-grid kinetic energy is presented. A dynamic version of the S-A DES model is proposed based on this connection. Validation studies and results from DES and LES applications will be presented and the effect of the proposed modification will be discussed.

  9. Exploring the case for assisted dying in the UK.

    PubMed

    Haigh, Carol

    This article discusses the concepts of euthanasia, assisted suicide and physician-assisted suicide, under the umbrella term of assisted dying, from a pro-assisted dying perspective. It outlines the key principles underpinning the debate around assisted dying and refutes the main arguments put forward by those opposing legalisation of assisted dying in the UK. PMID:22272538

  10. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    NASA Astrophysics Data System (ADS)

    Benoit, Louis

    En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q<= m+1. L'entier m parametrise la charge centrale: c(m)=1 -{6over m(m+1)} avec n>= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations

  11. Rapid prototyping of extrusion dies using layer-based techniques

    SciTech Connect

    Misiolek, W.Z.; Winther, K.T.; Prats, A.E.; Rock, S.J.

    1999-02-01

    Extrusion die design and development often requires significant craftsman skill and iterative improvement to arrive at a production-ready die geometry. Constructing the dies used during this iterative process from layers, rather than from one solid block of material, offers unique opportunities to improve die development efficiency when coupled with concepts drawn from the rapid prototyping field. This article presents a proof-of-concept illustrating the potential utility of layer-based extrusion dies for the die design and fabrication process. The major benefits include greater flexibility in the design process, a more efficient, automated fabrication technique, and a means for performing localized die modifications and repairs.

  12. Zum Einfluss der Filtergeschwindigkeit des Grundwassers auf die effektive Wärmeleitfähigkeit

    NASA Astrophysics Data System (ADS)

    Huber, Heiko; Arslan, Ulvi; Sass, Ingo

    2014-09-01

    By means of experimental investigation with a custom-built laboratory test station for measuring thermal conduction and convection, the increase in effective thermal conductivity due to the Darcy velocity in geothermal systems was investigated. The applicability of the database to in-situ geothermal systems was tested via extensive investigation at geothermal field sites. The increase in effective thermal conductivity due to groundwater flow was determined for sands of low, medium and high permeability. As a result of the study, additional recommendations have been developed for the design of groundwater-influenced geothermal systems which can complement the present directive (VDI-4640-1, 2010).

  13. The photographers of the Venus transit of 1874 (German Title: Die Photographen des Venusdurchgangs von 1874)

    NASA Astrophysics Data System (ADS)

    Duerbeck, Hilmar W.

    Apart from the photo-pioneer Hermann Krone from Dresden, little is known about the photographers who took part in the German expeditions for the observation of the Venus transit of 1874. We give a short overview of the photographic methods and instruments employed at that time, present biographic details about O. Eschke, G. Fritsch, C. Kardaetz. F. Stolze, Th. Studer and G. Wolfram, give some details on the expeditions and their final destinations, and show a few rare photographic documents. We also give a transcription of the letters of G. Fritsch written to Wilhelm Foerster in the course of the Persian expedition.

  14. Peter Andreas Hansen und die astronomische Gemeinschaft - eine erste Auswertung des Hansen-Nachlasses.

    NASA Astrophysics Data System (ADS)

    Schwarz, O.; Strumpf, M.

    The literary assets of Peter Andreas Hansen are deposited in the Staatsarchiv Hamburg, the Forschungs- und Landesbibliothek Gotha and the Thüringer Staatsarchiv Gotha. They were never systematically investigated. The authors present here some results of a first evaluation. It was possible to reconstruct the historical events with regard to the maintenance of the Astronomische Nachrichten and the Altona observatory in 1854. Hansen was a successful teacher for many young astronomers. His way of stimulating the evolution of astronomy followed Zach's tradition.

  15. The disputation of the astronomer Christoph Scheiner (German Title: Die Disputatio des Astronomen Christoph Scheiner)

    NASA Astrophysics Data System (ADS)

    Daxecker, Franz

    The newly found print "Theses Theologicae" is Christoph Scheiner's disputation, which took place on June 30, 1609. The title page contains Scheiner's name, presenting him as the author who is responsible for (respondente) 50 theses. The theses deal with the Summa theologica of Saint Thomas Aquinas: Nature of God, Creation, Morality, Canon Law, Grace, Faith, Justice, Devotion to Godd and the Saints, Divine Word and Sacraments.

  16. Die Ermittlung des Populationsindex von Meteorströmen. Eine ausführliche Anleitung.

    NASA Astrophysics Data System (ADS)

    Koch, B.

    The theory of the population index r is described. The methods of determination of r are explained. Conclusions concerning the relationship between limiting magnitude and population index are made. An example using the Quadrantids 1987 is given.

  17. Die neogene Hebungsgeschichte der Patagonischen Anden im Kontext der Subduktion eines aktiven Spreizungszentrums

    NASA Astrophysics Data System (ADS)

    Warkus, Frank

    2002-05-01

    Das Phänomen der Subduktion eines aktiven Spreizungszentrums an der Südspitze Südamerikas ist seit langem bekannt. Eine Vielzahl von geologischen Beobachtungen wurden mit diesem Phänomen in Verbindung gebracht, trotzdem ist der genaue Mechanismus der Beeinflussung des aktiven Kontinentalrandes weitgehend unbekannt. Die Zusammenhänge zwischen den Subduktionsprozessen und der Entwicklung der patagonischen Anden zwischen 47°S und 48°S stehen im Mittelpunkt der Untersuchungen. Um eine detaillierte zeitliche Auflösung der zugrunde liegenden Prozesse untersuchen zu können, wurde die Entwicklung der Vorlandsedimentation, die thermische Entwicklung und die Heraushebung der Oberkruste des andinen Orogens untersucht und diese in Bezug zur Subduktion des Chile-Rückens gesetzt. Im Bereich von 47°30′S wurden die synorogenen Vorlandsedimente der Santa Cruz Formation sedimentologisch untersucht. Diese fluviatilen Sedimente wurden in einem reliefarmen Vorlandgebiet durch häufige Rinnenverlagerung und dem Aufbau von Rinnenumlagerungsgürteln in Kombination mit assoziierten groräumigen Überflutungsablagerungen akkumuliert. Sie stehen in einem engen Zusammenhang mit der orogenen Entwicklung im andinen Liefergebiet. Dies spiegelt sich in dem nach oben gröber werdenden Zyklus der Santa Cruz Formation wider. Die magnetostratigraphischen Untersuchungen einer 270 m mächtigen Sequenz aus der Basis der Santa Cruz Formation, die mit 329 Einzelproben aus 96 Probenpunkten beprobt wurde, ergab 7 Umkehrungen der geomagnetischen Feldrichtung. Mit Hilfe der geomagnetischen Polaritätszeitskala (CANDE AND KENT, 1995) konnte der untersuchte Abschnitt der Santa Cruz Formation zwischen 16.2 und 18.5 Ma datiert werden. Als Träger der Sedimentations-Remanenz konnten überwiegend Pseudoeinbereichs-Magentitpartikel und untergeordnet Hämatitpartikel identifiziert werden. An drei Profilen der Santa Cruz Formation wurden aus Sandsteinlagen unterschiedlicher stratigraphischer Position

  18. Why do patients with lupus nephritis die?

    PubMed Central

    Correia, P; Cameron, J S; Lian, J D; Hicks, J; Ogg, C S; Williams, D G; Chantler, C; Haycock, D G

    1985-01-01

    Over 20 years 42 of 138 patients with systemic lupus erythematosus "died"--that is, suffered actual death or went into terminal renal failure, or both; data from 41 were available for analysis. In most patients the causes of death were multiple. Twenty seven patients went into terminal renal failure, of whom 25 were offered dialysis treatment. Three regained renal function later, 12 survived on dialysis or with functioning kidney allografts--almost all with inactive lupus--but 13 died after starting dialysis, most within a few weeks or months. The principal causes were active lupus or infection. In those patients with renal failure after rapid deterioration in renal function (n = 14) there were nine deaths, while of 10 patients with a slow evolution into renal failure, only four died. Four patients with impaired and 10 with normal renal function died, again most often from complications of lupus or from infection. Vascular disease was a major cause of death in seven patients, all but two of whom were young; of 15 postmortem examinations, eight showed severe coronary artery atheroma, and three surviving patients required coronary bypass operations. Analysis of the timing of death or entry into renal failure showed that in 12 out of 13 patients who died within two years of onset the lupus was judged to be active, while this was true in only eight out of 19 patients who died later. Six of the seven vascular deaths occurred later than two years from onset, while only nine of 26 renal "deaths" occurred before two years; deaths from infections (n = 13) were distributed equally. Despite this and aggressive treatment of active disease, the principal cause of actual death was uncontrolled lupus. PMID:3917713

  19. Die Europäische Union, die Europäische Gemeinschaft und ihre Rechtsordnung, die Europäische Lebensmittelkontrolle

    NASA Astrophysics Data System (ADS)

    Gallhoff, Gudrun; Rimkus, Gerhard G.

    Die Europäische Union (EU) ist ein Zusammenschluss von siebenundzwanzig unabhängigen Staaten, um deren wirtschaftliche, politische und soziale Zusammenarbeit zu verstärken. Seit 1. Mai 2007 hat sie die folgenden Mitglieder: Österreich, Belgien, Bulgarien, Dänemark, Finnland, Frankreich, Deutschland, Griechenland, Irland, Italien, Luxemburg, die Niederlande, Portugal, Spanien, Schweden, das Vereinigte Königreich von Großbritannien und Nordirland, Zypern, die Tschechische Republik, Estland, Ungarn, Lettland, Litauen, Malta, Polen, Rumänien, die Slowakei und Slowenien [1]. (Hinweis: Die Republik Zypern hat juristisch Souveränität über die ganze Insel, da die Türkische Republik Nordzypern international nicht anerkannt wird.)

  20. Die kreiselnde Büroklammer: Spielwiese

    NASA Astrophysics Data System (ADS)

    Ucke, Christian; Schlichting, Hans-Joachim

    2005-01-01

    Mit Büroklammern lassen sich einfach und schnell physikalische Experimente realisieren. Vorgestellt werden zwei ungewöhnliche Kreisel (darunter ein Stehaufkreisel), die sich in wenigen Minuten biegen lassen. Weiterhin lässt sich mit Büroklammern die schon von Leibniz abgeleitete Kettenlinie simulieren. Mit etwas Mehraufwand lässt sich eine Hängebrücke bauen, bei der sich für das Tragkabel eine Parabel als Kurvenform ergibt. Im Internet sind Programme verfügbar, mit denen sich Kettenlinie und Hängeparabel simulieren lassen.

  1. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.A.; Ahuett-Garza, H.; Choudhury, A.K.; Dedhia, S.

    1998-05-01

    This report summarizes two years of research intended to develop methods to model and predict the deflection patterns in die casting dies. No comprehensive analysis of this type had previously been completed. The die casting process is complex and involves numerous mechanical and thermal phenomena that effect the mechanical behavior of the die. A critical activity in this work was sorting out and evaluating the relative contributions of the various mechanisms to die deflections. This evaluation was accomplished through a series of simple engineering analyses based primarily on the order of magnitude of the influence of each load considered on die deflections. A modeling approach incorporating commercially available finite element analysis software was developed and tested. The model evolved by testing simple models against more comprehensive models and against the limited experimental data that is available. The development of the modeling approach lead to consideration of the die casting machine in more detail than was originally anticipated. The machine is critical and cannot be ignored. A simplified model described as a spring/platen model was developed to account for the machine platens, tie bars, and toggles. The characteristics of this model are described and predictions based on this model are compared against full machine models and measured deflections of machine platens. Details of the modeling approach and the various case studies are provided in the report and in several publications that have resulted from the work.

  2. Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies

    NASA Astrophysics Data System (ADS)

    Levy, B. S.; Van Tyne, C. J.

    2015-01-01

    The effect of the strength ratio extracted from an Archard model for wear is used to describe the wear rates expected in hot forging dies. In the current study, the strength ratio is the strength of the hot forging die to the strength of the work piece. Three hot forging die steels are evaluated. The three die steels are FX, 2714, and WF. To determine the strength of the forging die, a continuous function has been developed that describes the yield strength of three die steels for temperatures from 600 to 700 °C and for times up to 20 h (i.e., tempering times of up to 20 h). The work piece material is assumed to be AISI 1045. Based on the analysis, the wear resistance of WF should be superior and FX should be slightly better than 2714. Decreasing the forging temperature increases the strength ratio, because the strength of the die surface increases faster than the flow strength of AISI 1045. The increase in the strength ratio indicates a decrease in the expected wear rate.

  3. Investigation of Die Stress Profiles during Powder Compaction using Instrumented Die

    SciTech Connect

    Hong, Sung-tae; Hovanski, Yuri; Lavender, Curt A.; Weil, K. Scott

    2008-06-01

    The radial stress profile in a cylindrical die during compaction of titanium (Ti) powder was investigated by experiments. The concept of an instrumented die was extended to design an enhanced instrumented die. Custom-made strain gage pins were used to measure the radial stress during powder compaction. The test fixture was designed to simulate double-action pressing. The measured die stress profile for Ti powder was compared with that for a commercially available iron (Fe) powder. The stress history shows that an appreciable residual stress remains in the die in the radial direction after the axial compaction stress is removed from the powder. Furthermore, the radial stress profile in the die, while under maximum axial compaction stress, is more uniform across the height of the Fe compact than that of the Ti compact. In addition, the residual stress profile in the die in the radial direction reduces symmetrically in both directions beyond the height of the compact for both powders. Finally, the Ti powder shows a significantly higher frictional coefficient at the maximum axial compaction stress, and consequently a higher maximum axial ejection stress than the Fe powder.

  4. Peste des petits ruminants

    PubMed Central

    Parida, S.; Muniraju, M.; Mahapatra, M.; Muthuchelvan, D.; Buczkowski, H.; Banyard, A.C.

    2015-01-01

    Peste des petits ruminants virus causes a highly infectious disease of small ruminants that is endemic across Africa, the Middle East and large regions of Asia. The virus is considered to be a major obstacle to the development of sustainable agriculture across the developing world and has recently been targeted by the World Organisation for Animal Health (OIE) and the Food and Agriculture Organisation (FAO) for eradication with the aim of global elimination of the disease by 2030. Fundamentally, the vaccines required to successfully achieve this goal are currently available, but the availability of novel vaccine preparations to also fulfill the requisite for differentiation between infected and vaccinated animals (DIVA) may reduce the time taken and the financial costs of serological surveillance in the later stages of any eradication campaign. Here, we overview what is currently known about the virus, with reference to its origin, updated global circulation, molecular evolution, diagnostic tools and vaccines currently available to combat the disease. Further, we comment on recent developments in our knowledge of various recombinant vaccines and on the potential for the development of novel multivalent vaccines for small ruminants. PMID:26443889

  5. Dying other, dying self: creating culture and meaning in palliative healthcare.

    PubMed

    McCann, Christopher J; Adames, Hector Y

    2013-08-01

    Dying is an act of creativity, and we each die as cultural beings. Culture helps us create the meaning death requests of us. However, the dominant culture of the healthcare system views death as a failure of modern medicine, an event of unspeakable terror and taboo. Palliative clinicians must honor each dying person's cultural identity (as well as the person's family), not subject it to the dominant discourse of Western medicine. This article offers practical guidelines for palliative clinicians to do so, as well as a case vignette. PMID:22854052

  6. Continuing Education on Dying and Death.

    ERIC Educational Resources Information Center

    Chodil, Judith J.; Dulaney, Peggy E.

    1984-01-01

    "Dying and Death in Critical Care Practice" was a one-day continuing education offering designed for registered nurses who practiced in settings such as emergency rooms, intensive care units, coronary care units, and operating rooms. The workshop was part of a continuing education curriculum in critical care nursing. (SSH)

  7. Dying in the age of choice.

    PubMed

    Black, Kathy; Csikai, Ellen L

    2015-01-01

    Due to the unprecedented increase in the United States aging demographics, many more people are living longer and reaching older ages than ever before. However, a longer life is not necessarily a better life, as the vast majority will face a period of prolonged deteriorating health prior to death. Although notable efforts have been underway that are designed to improve the end-of-life experience, increasing numbers of individuals express a desire and/or act upon an intent to end their lives precipitously. Though still limited, the options to actively participate in their own deaths are growing. Requests for a hastened death can occur among people of all ages and includes those with advanced illness as well as others wanting to die due to unbearable suffering. This article provides an overview of the ongoing discourse about the experience of dying faced by many older adults, including aspects frequently associated with "a good death." The limitations of established practices which seek to provide a "better" dying experience are identified followed by discussion of the growing availability of alternative options. Reflective considerations are presented to guide practice vis-à-vis the changing landscape surrounding options in dying. PMID:25869146

  8. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  9. Flexible, Ultra-Thin, Embedded Die Packaging

    NASA Astrophysics Data System (ADS)

    McPherson, Ryan J.

    As thin, flexible electronics solutions become more robust, their integration into everyday life becomes more likely. With possible applications in wearable electronics, biomedical sensors, or 'peel and stick' sensors, the reliability of these ultra-thin packages becomes paramount. Likewise, the density achievable with stacked packages benefits greatly from thinner die stacks. To this end, techniques previously developed have demonstrated packages with die thinned to approximately 20mum. Covered in this work are methods for thinning and packaging silicon die, as well as information on common materials used in these processes. The author's contribution is a fabrication process for embedding ultra-thin (approximately 10mum) silicon die in polyimide substrates. This method is fully illustrated in Chapter 3 and enumerated in the Appendix as a quick reference. Additionally, thermal cycle testing of passive daisy chain assemblies has shown promising reliability data. Packages were mounted in three alignments: flat, concave, and convex, and placed into thermal shock testing. Finally, the author discusses possible applications for this fabrication process, including the fabrication of multi-chip-modules.

  10. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  11. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  12. The Hospice: Advocate for the Dying.

    ERIC Educational Resources Information Center

    Anspaugh, David J.

    1978-01-01

    The hospice philosophy seeks to meet the needs of dying patients and their families. These needs include: effective control of pain; to be loved and to alleviate loneliness; to retain dignity and maintain control of as many aspects of life as possible; and to help the family be supportive and adapt to their inevitable loss. (JMF)

  13. A profile of silicosis cases who died.

    PubMed

    Phoon, W H

    1982-01-01

    Silicosis cases which had been notified by doctors and confirmed after investigations were followed up by the Industrial Health Division. Up to August 1981, a total of 313 persons were confirmed as having the disease. Of these, 59 had died. The majority of these 59 persons had had their silica exposure in the granite quarries. 13 had been exposed to "rubber powder" which contained a high percentage of free silica. 52 of those who died were male, and their average age at death was 60.87 years. This did not appear to be significantly shorter than their life expectancy of 65.1 years. But the average age of death for the 7 women was 58.86 years, which was much shorter than their life expectancy of 70 years. Many of the men died from causes unrelated to silicosis. But 6 of the 7 women had progressive massive fibrosis (PMF) and they apparently died of the disease or complications arising from it. PMID:7073220

  14. [Training for working with the dying].

    PubMed

    Delisle, I

    1990-04-01

    A doctoral thesis, recently defended at the University of Caen in France, is discussed here. This descriptive study looks at the question of training individuals to accompany the dying patient, and the abilities, qualifications and skills that are required. PMID:2331671

  15. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  16. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  17. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  18. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  19. Farewells by the Dying: A Sociological Study.

    ERIC Educational Resources Information Center

    Kellehear, Allan; Lewin, Terry

    1989-01-01

    Interviewed 100 terminally ill cancer patients to examine farewells made before the interview and those desired and planned but not yet completed. Most patients (81 percent) desired to farewell; most wanted farewell to occur late in course of their dying. Prominent in preferred styles of farewells were the gift, conversation, and letter.…

  20. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  1. Checkpoint-Inhibitoren in der Immuntherapie: Ein Meilenstein in der Behandlung des malignen Melanoms.

    PubMed

    Wilden, Sophia M; Lang, Berenice M; Mohr, Peter; Grabbe, Stephan

    2016-07-01

    Seit Jahrzehnten ist bekannt, dass Tumoren vom Immunsystem erkannt und zerstört werden können. Diese, vor allem in Tierversuchen gewonnene Erkenntnis konnte jedoch in der Vergangenheit nicht zum Nutzen unserer Patienten umgesetzt werden, da immunonkologische Therapieansätze in den letzten Jahrzehnten in der Anwendung beim Menschen stets versagt haben. Daher hat, mit Ausnahme der adjuvanten Interferontherapie, keines dieser Verfahren den Einzug in die klinische Versorgung gefunden. Langzeitüberleben unter guter Lebensqualität war dabei sehr wenigen Patienten vorbehalten. Mit den neuen immunologischen Therapieansätzen wird jedoch sowohl das Langzeitüberleben als auch die Lebensqualität onkologischer Patienten neu definiert. Auf die neuen "Immun-Checkpoint-Inhibitoren" spricht erstmals ein relevanter Teil der behandelten Patienten an und diese zeigen in der Regel langandauernde Remissionen bis hin zur Heilung. Schon jetzt ist klar, dass die Immuntherapie in Zukunft eine der wesentlichen Therapiesäulen bei der Behandlung des metastasierten Melanoms und auch vieler anderer fortgeschrittener Tumoren bilden wird. In dieser Übersicht werden die wichtigsten neuen Therapiemodalitäten besprochen und sowohl deren Wirkprinzip als auch klinische Daten zum Therapieansprechen und zu erwartenden Nebenwirkungen der Therapie referiert. PMID:27373243

  2. Die-Attached Versus Die-Detached Resin Injection Chamber for Pultrusion

    NASA Astrophysics Data System (ADS)

    Palikhel, D. R.; Roux, J. A.; Jeswani, A. L.

    2013-02-01

    Resin injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to explore the "attached-die configuration" and "detached-die configuration" for improving the resin injection pultrusion process. In this work the impact of pull speed on complete wet out of the reinforced fiber is investigated for attached-die and detached-die resin injection pultrusion with various chamber length considerations. A 3-D finite volume technique was applied to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. This work explores the resin injection pressure needed to achieve complete wet out and the corresponding maximum pressure inside the resin injection chamber so as to improve injection chamber design to keep the pressure within the injection chamber within reasonable constraints for different pull speeds.

  3. Zu einer inhaltsorientierten Theorie des Lernens und Lehrens der biologischen Evolution

    NASA Astrophysics Data System (ADS)

    Wallin, Anita

    Der Zweck dieser Studie (zwecks Überblick siehe dazu Abb. 9.1) war zu untersuchen, wie die Schüler der Sekundarstufe II ein Verständnis von der Theorie der biologischen Evolution entwickeln. Vom Ausgangspunkt "Vorurteile der Schüler“ ausgehend wurden Unterrichtssequenzen entwickelt und drei verschiedene Lernexperimente in einem zyklischen Prozess durchgeführt. Das Wissen der Schüler wurde vor, während und nach den Unterrichtssequenzen mit Hilfe von schriftlichen Tests, Interviews und Diskussionsrunden in kleinen Gruppen abgefragt. Etwa 80 % der Schüler hatten vor dem Unterricht alternative Vorstellungen von Evolution, und in dem Nachfolgetest erreichten circa 75 % ein wissenschaftliches Niveau. Die Argumentation der Schüler in den verschiedenen Tests wurde sorgfältig unter Rücksichtnahme auf Vorurteile, der konzeptionellen Struktur der Theorie der Evolution und den Zielen des Unterrichts analysiert. Daraus konnten Einsichten in solche Anforderungen an Lehren und Lernen gewonnen werden, die Herausforderungen an Schüler und Lehrer darstellen, wenn sie anfangen, evolutionäre Biologie zu lernen oder zu lehren. Ein wichtiges Ergebnis war, dass das Verständnis existierender Variation in einer Population der Schlüssel zum Verständnis von natürlicher Selektion ist. Die Ergebnisse sind in einer inhaltsorientierten Theorie zusammengefasst, welche aus drei verschiedenen Aspekten besteht: 1) den inhaltsspezifischen Aspekten, die einzigartig für jedes wissenschaftliche Feld sind; 2) den Aspekten, die die Natur der Wissenschaft betreffen; und 3) den allgemeinen Aspekten. Diese Theorie kann in neuen Experimenten getestet und weiter entwickelt werden.

  4. Classification of 20 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Davis, T. M.; Kim, A. G.; Macualay, E.; Lidman, C.; Sharp, R.; Tucker, B. E.; Yuan, F.; Zhang, B.; Lewis, G. F.; Sommer, N. E.; Martini, P.; Mould, J.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  5. Classification of 15 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Yuan, F.; Tucker, B. E.; Lidman, C.; Martini, P.; Gshwend, Julia; Moller, A.; Zhang, B.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  6. Classification of 3 DES Supernovae with OzDES

    NASA Astrophysics Data System (ADS)

    Moller, A.; Tucker, B. E.; Yuan, F.; Lewis, G.; Lidman, C.; Macaulay, E.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.

    2016-02-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  7. Classification of 4 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Glazebrook, K.; Amon, A.; Lidman, C.; Martini, P.; Tucker, B. E.; Yuan, F.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  8. Classification of 6 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Lewis, G. F.; Mould, J.; Lidman, C.; Tucker, B. E.; Sharp, R.; Yuan, F.; Martini, P.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  9. Classification of 14 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Tucker, B. E.; Sharp, R.; Yuan, F.; Zhang, B.; Lidman, C.; Davis, T. M.; Hinton, S.; Mould, J.; Smith, R. C.; Schubnell, M.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Castander, F. J.; Desai, S.; Paech, K.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey. The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  10. Cancer Patients Who Choose to Die At Home Live Longer

    MedlinePlus

    ... suggest that doctors shouldn't hesitate to allow dying cancer patients to receive palliative care at home, ... people would like to be at home when dying, but there have been concerns about whether the ...

  11. Women Twice as Likely to Die from Severe Heart Attack

    MedlinePlus

    ... gov/medlineplus/news/fullstory_158172.html Women Twice as Likely to Die From Severe Heart Attack, Study ... 2016 (HealthDay News) -- Women are up to twice as likely as men to die from the most ...

  12. Fatigue of die cast zinc alloys

    SciTech Connect

    Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

    2006-04-01

    The rotating bending fatigue limit of die cast zinc alloy 2, alloy 3, alloy 5, AcuZinc 5, and ZA-8 were determined as a part of an on-going program by ILZRO into the mechanical properties of die cast zinc. The stress-life (S-N) curves of alloys 3, 5, AcuZinc 5, and ZA-8 were determined previously. This presentation reports the results of the S-N curve for Alloy 2 and the calculated fatigue limits for all five alloys. During the previous stress-life testing, the samples were stopped at 10 million cycles and the fatigue limit for alloy 3, alloy 5, and AcuZinc 5 appeared to be higher and the fatigue limit for ZA-8 appeared to be lower than the values reported in the literature. This was further investigated in alloy 5 and ZA-8 by testing continuous cast bulk alloy 5 and ZA-8.

  13. Architecture for on-die interconnect

    DOEpatents

    Khare, Surhud; More, Ankit; Somasekhar, Dinesh; Dunning, David S.

    2016-03-15

    In an embodiment, an apparatus includes: a plurality of islands configured on a semiconductor die, each of the plurality of islands having a plurality of cores; and a plurality of network switches configured on the semiconductor die and each associated with one of the plurality of islands, where each network switch includes a plurality of output ports, a first set of the output ports are each to couple to the associated network switch of an island via a point-to-point interconnect and a second set of the output ports are each to couple to the associated network switches of a plurality of islands via a point-to-multipoint interconnect. Other embodiments are described and claimed.

  14. Spiritual aspects of death and dying.

    PubMed Central

    Mermann, A. C.

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned. PMID:1519377

  15. Dying in hospital: the residents' viewpoint

    PubMed Central

    Ahmedzai, S

    1982-01-01

    A survey of residents' (junior house officers') experiences and attitudes to the terminal care part of their work in four Glasgow teaching hospitals showed that even a month after starting work one-fifth of the respondents had not actively managed a dying patient. Sixty-four per cent thought that they had received inadequate teaching in terminal care. Depression and anxiety had been the most difficult symptoms encountered. The residents thought that the ward nursing staff contributed much more than their senior medical colleagues to both the medical and psychological aspects of terminal care. The results indicate a need for more undergraduate education in the most relevant areas, such as coping with the psychological problems of dying patients and their relatives. Newly qualified residents require more support from senior medical staff in looking after the terminally ill. PMID:6809204

  16. Impact of Temperature on Cooling Structural Variation of Forging Dies

    NASA Astrophysics Data System (ADS)

    Piesova, Marianna; Czan, Andrej

    2014-12-01

    The article is focused on the issue of die forging in the automotive industry. The cooling effect of temperature on the structure of forged die are under review. In the article, there is elaborated the analysis of theoretical knowledge in the field, focusing on die forging and experimentally proven effect of the cooling rate on the final structure of forged dies made of hypoeutectic carbon steel C56E2.

  17. Assisted dying - should the UK change its stance?

    PubMed

    Gordon, Daniel; Raphael, Claire E; Vassiliou, Vassilios

    2015-04-01

    Along with an increasing interest in assisted dying by many European and North American countries, some of which have already modified their existing laws to accommodate this, the interest in assisted dying in the UK has increased once again following Lord Falconer's Assisted Dying for the Terminally Ill Bill. Drawing on examples from countries where similar assisted dying laws are already in place, this article analyses and contextualises the proposed bill and discusses its potential pitfalls and benefits for the UK. PMID:25628340

  18. Medical futility and care of dying patients.

    PubMed Central

    Jecker, N S

    1995-01-01

    In this article, I address ethical concerns related to forgoing futile medical treatment in terminally ill and dying patients. Any discussion of medical futility should emphasize that health professionals and health care institutions have ethical responsibilities regarding medical futility. Among the topics I address are communicating with patients and families, resolving possible conflicts, and developing professional standards. Finally, I explore why acknowledging the futility of life-prolonging medical interventions can be so difficult for patients, families, and health professionals. PMID:7571593

  19. Japanese particle-physics leader dies

    NASA Astrophysics Data System (ADS)

    Durrani, Matin

    2008-08-01

    Yoji Totsuka, former director general of the KEK particle-physics lab in Japan, died on 10 July at the age of 66. Totsuka, whose research interests were in the field of neutrino physics, served as KEK boss for three years from April 2003. After retiring in 2006, Totsuka became a professor emeritus at KEK and the University of Tokyo. His funeral on 12 July was attended by more than 500 people.

  20. Public attitudes toward the right to die.

    PubMed Central

    Genuis, S J; Genuis, S K; Chang, W C

    1994-01-01

    OBJECTIVE: To determine public attitudes toward the right to die, euthanasia and related end-of-life decisions. DESIGN: Mail survey based on telephone numbers randomly selected by computer. SETTING: Edmonton. PARTICIPANTS: Of 1347 computer-generated, randomly selected telephone numbers called between February and June 1992, 902 individuals were reached, and 500 eligible contacts (55%) agreed to fill out the mailed questionnaire based on 12 vignettes involving end-of-life decisions. A total of 356 usable questionnaires (71%) were subsequently returned. MAIN OUTCOME MEASURES: Attitudes toward end-of-life decisions including withdrawal of life support, euthanasia, chronic suffering and the right to die, living wills and family involvement in decision making for incompetent individuals. Comments and demographic data were also solicited. RESULTS: Of the respondents 84% supported a family's right to withdraw life support from a patient in a persistent coma, and 90% supported a mentally competent patient's right to request that life support be withdrawn. Active euthanasia was supported by 65% for only patients experiencing severe pain and terminal illness. There was marked opposition to euthanasia for patients in other circumstances, such as an elderly disabled person who feels he or she is a burden on relatives (opposed by 65%), a patient with chronic depression resistant to treatment (by 75%) or an elderly person no longer satisfied with life and who has various minor physical ailments (by 83%). In all, 63% of the respondents felt that legalization of euthanasia for terminal illnesses would lead to euthanasia for many other, unsupported reasons, and 34% supported legislation to prohibit euthanasia in all situations. CONCLUSIONS: Public support for the right to die varies depending on the circumstances of the patient. The single most significant factor determining attitudes was the level of religious activity. The family's wishes were an important factor in end

  1. A Contingency Framework for Listening to the Dying

    ERIC Educational Resources Information Center

    Vora, Erika; Vora, Ariana

    2008-01-01

    Listening to the dying poses special challenges. This paper proposes a contingency framework for describing and assessing various circumstances when listening to the dying. It identifies current approaches to listening, applies the contingency framework toward effectively listening to the dying, and proposes a new type of listening called…

  2. Die and telescoping punch form convolutions in thin diaphragm

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Die and punch set forms convolutions in thin dished metal diaphragm without stretching the metal too thin at sharp curvatures. The die corresponds to the metal shape to be formed, and the punch consists of elements that progressively slide against one another under the restraint of a compressed-air cushion to mate with the die.

  3. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  4. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  5. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  6. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  7. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid of nothing except hand...

  8. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  9. A study of erosion in die casting dies by a multiple pin accelerated erosion test

    NASA Astrophysics Data System (ADS)

    Shivpuri, R.; Yu, M.; Venkatesan, K.; Chu, Y.-L.

    1995-04-01

    An accelerated erosion test was developed to evaluate the erosion resistance of die materials and coatings for die casting application. An acceleration in wear was achieved by selecting pyramid-shaped core pins, hypereutectic aluminum silicon casting alloy, high melt temperatures and high gate velocities. Multiple pin design was selected to enable multiple test sites for comparative evaluation. Apilot run was conducted on a 300 ton commercial die casting machine at various sites (pins) to verify the thermal and flow similarities. Subsequently, campaigns were run on two different 300 ton commercial die casting machines to evaluate H13 die material and different coatings for erosive resistance. Coatings and surface treatments evaluated included surface micropeening, titanium nitride, boron carbide, vanadium carbide, and metallic coatings—tungsten, molybdenum, and platinum. Recent campaigns with different melt temperatures have indicated a possible link between soldering phenomena and erosive wear. This paper presents the details of the test set up and the results of the pilot and evaluation tests.

  10. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  11. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  12. Sheet metal stamping die design for warm forming

    DOEpatents

    Ghosh, Amit K.

    2003-04-22

    In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

  13. ["Good dying"--definition and current state of research].

    PubMed

    Hutter, Nico; Stößel, Ulrich; Meffert, Cornelia; Körner, Mirjam; Bozzaro, Claudia; Becker, Gerhild; Baumeister, Harald

    2015-08-01

    The advances of modern medicine did not only result in prolongation of life expectancy, but also led to a shift from dying at home to dying in public institutions. In western countries most people die at advanced age in medical facilities. Hence, the question regarding the conditions, which should be provided by society and especially medicine, to allow terminally ill people to experience "good dying" is substantial. For this purpose, an examination of patients', family members' and health care providers' understanding of the term " good dying" is required. The present paper aims at shedding light on the term "good dying" and to summarize the current state of research. Therefore, the attributes of "good dying" will be described from the perspectives of patients, family members and health care providers, which are discussed and examined in current medical-sociological research. These attributes can be illustrated on three dimensions: Quality of life at the end of life (e. g. pain relief, mental well-being), quality of dying (e. g. avoiding prolonged dying, autonomy, presence of relatives) and quality of health care at the end of life (e. g. patient-oriented health care, positive communication between health care providers and patients, availability of guidelines). Although the attributes of "good dying" are described in detail in the existing literature, further studies have to clarify the relevance and impact of these attributes as predictors of "good dying". PMID:26306020

  14. DIE Deflection Modeling: Empirical Validation and Tech Transfer

    SciTech Connect

    R. Allen Miller

    2003-05-28

    This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.

  15. Simulation of Stamping Process of Automotive Panel Considering Die Deformation

    SciTech Connect

    Keum, Y.T.; Ahn, I.H.; Lee, I.K.; Song, M.H.; Kwon, S.O.; Park, J.S.

    2005-08-05

    In order to see the effect of die deformation on the forming of sheet metals, the draw-ins, strains, and spring-backs of an automotive fender panels are numerically simulated considering the die deformation, which is found by the simultaneous structural analysis of press and dies. By coupling the forming analysis and the structural analysis, the die deformation is simultaneously taken into account in the forming process. Furthermore, for the consideration of load difference transferred among the upper die, punch, and blank holder due to the changes in sheet thickness, the gap elements are employed instead of the blank sheet in the structural analysis. The numerical simulation results of an automotive fender draw panel are compared with the measurements. The comparison of the forming and spring-back analysis results between the rigid die and the deformed die shows that the deformed tool provides more accurate forming and spring-back prediction.

  16. Euthanasia, assisted dying and the right to die in Ghana: a socio-legal analysis.

    PubMed

    Owusu-Dapaa, Ernest

    2013-12-01

    There is unanimity among states to protect the continuation of life of the individual as a safeguard against their collective extinction. The right to life is accordingly guaranteed but its antithesis, the right to die is the subject of an unending debate. The controversy over the right to die is deepened by rapid advances in medicine, creating the capability for prolongation of life beyond the span which one's natural strength can endure. Ghana's supreme law explicitly guarantees the right to life but remains ambiguous on right to die, particularly euthanasia and assisted dying. Thus, some of the other rights, such as the right to dignity and not to be tortured, can creatively be exploited to justify some instances of euthanasia. Ghana's criminal code largely proscribes euthanasia. Notwithstanding, proscription of euthanasia and assisted dying by the law, in Ghana's empirical work undertaken in some of the communities in Ghana, suggests that euthanasia is quietly practisedin health facilities and private homes, especially in the rural areas. Contrary to the popular reasons assigned in the literature of the Western world, with respect to the practice or quest for legalization of euthanasia as being a necessity for providing relief from pain or hopeless quality of life, empirical data from social and anthropological studies conducted in Ghana reveal that poverty is the motivation for informal euthanasia practice in Ghana rather than genuine desire on part of patients to die or their relatives to see to their accelerated death. Apart from poverty, traditional cultural values of African societies consider non-natural death as a taboo and ignominy to the victim and his family. Thus, any move by the government to legalize euthanasia will need to be informed by widely held consultations and a possible referendum; otherwise the law may be just a mere transplant of Western models of legislation on euthanasia without reflecting the ethos of the African people. PMID:24552118

  17. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

  18. When a partner dies: lesbian widows.

    PubMed

    Bent, Katherine N; Magilvy, J Kathy

    2006-06-01

    Death of a life partner and the subsequent bereavement are profound experiences for an individual. By far, the majority of bereavement research reported is focused on heterosexual couples, primarily married and often in the later years of life. The purpose of this study was to describe the bereavement experiences of lesbians whose life partners have died. The study used a descriptive, qualitative design informed by feminist scholarship and phenomenology to access the depth of personal experiences, as well as internally interpreted meanings of those experiences, among lesbian widows. PMID:16613798

  19. Models of physician-assisted dying.

    PubMed

    Girsh, F

    1996-12-01

    Repeated surveys have shown that more than 70% of Americans support physician aid in dying for terminally ill mentally competent adults. Recent polls of physicians in Oregon and Michigan demonstrate majority support of those doctors for such a law while 25% of physicians surveyed in Washington admitted to already providing help. Models of how that would work have been spelled out in proposed legislation in the United States since 1988, other models come from the Northern Territory in Australia, from Holland, and from Jack Kevorkian's writing and actions as well as from other writers such as Dr Timothy Quill. PMID:9009461

  20. [From absolute necessity of dying to preventive planning of dying? The change of social and medicine debates on dying in the 1980s].

    PubMed

    Jordan, I

    2010-04-01

    International euthanasia debates focussing on "autonomous dying" in the 1980s corresponded with a general change in the health-care system: availability of new technical means with an analogous medical-ethic understanding of human suffering and dying. This change is part of a general development from "passive health consumption" to "active prevention" in our society. PMID:20229456

  1. National Metal Casting Research Institute final report. Volume 2, Die casting research

    SciTech Connect

    Jensen, D.

    1994-06-01

    Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

  2. Care of the dying adolescent: special considerations.

    PubMed

    Freyer, David R

    2004-02-01

    More than 3000 adolescents in the United States die annually from the effects of chronic illness. Providing appropriate end-of-life care for these patients is particularly challenging because of several developmental, ethical, and legal considerations relevant to this age group. Developmental issues relate to the ways in which life-threatening illness alters the normal physical and psychological changes associated with adolescence, including attainment of independence, social skills, peer acceptance, and a healthy self-image. Ethical and legal issues arise from the fact that many terminally ill adolescents <18 years of age lack ordinary legal authority to make binding medical decisions (including discontinuation of their treatment), yet they meet functional criteria for having the competence to do so. In such situations, a broad medical, ethical, and legal consensus supports giving decisional authority to the minor patient. Even when full decisional authority is not appropriate, strong moral arguments exist for taking serious account of the young adolescent's treatment preferences. In supporting the dying adolescent, an atmosphere promoting excellent communication and sound decision-making should be fostered as early as possible during preterminal care and maintained thereafter. Once palliative-care strategies become the clinical focus, psychosocial support sensitive to the adolescent's developmental stage must be provided. Using these principles, clinicians can play a crucial role in helping the adolescent, in the face of death, to experience richness of life and the dignity of self-determination. PMID:14754953

  3. [The debate about the right to die].

    PubMed

    Beca, Juan Pablo; Ortiz, Armando; Solar, Sebastián

    2005-05-01

    The Right to Die is a debatable issue and some basic notions need to be clarified to discuss it. Death needs to be recognized as part of human life. The goal of medicine is to avoid pain and alleviate suffering, to prevent premature death and when this is not possible, to let it occur peacefully. The concept of euthanasia is unclear, which increases the confusion on end-of-life topics. The term euthanasia should be used only when referring to medical acts performed to produce the patient's death, with the intention of terminating his/her suffering. It is what is usually called "active" euthanasia, which can be voluntary or involuntary. It is essential to understand the difference between producing and allowing death. This will permit timely decisions about limiting or withdrawing treatments, that can be disproportionate or that are only prolonging suffering. Limiting treatments does not mean to abandon the patient but rather to redefine his needs, such as pain treatment, prevention of complications, and relief of suffering. The ethic rationale for these decisions is the respect to the dignity of human life, and the estimation of proportionality or futility of each treatment. The physician's duty with the patient at the end of his life is to assist him in dying according to his values and to minimize his distress. PMID:15970987

  4. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, J.E.; Korth, G.E.

    1985-06-27

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  5. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, John E.; Korth, Gary E.

    1986-01-01

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block.

  6. Dying, mourning, and spirituality: a psychological perspective.

    PubMed

    Marrone, R

    1999-09-01

    Based in an unfortunate tradition that stretches back in time to Watson's behaviorism and Freud's psychoanalysis, psychology has tended to reject and to pathologize matters of the spirit. In the past 30 years, however, with the advent of what has been termed the cognitive revolution, psychology has greatly expanded the scope of its subject matter. Psychologists and thanatologists have begun to unravel the cognitive underpinnings of our assumptive world and the transformation of those underpinnings in times of crisis and stress. This article examines the cognitive basis of the spiritual experience and the use of cognitive assimilation, accommodation strategies during the process of mourning the death of a loved one, as well as during the process of living our own dying. Of special importance to mental health professionals and clergy, new research on dying, mourning, and spirituality suggests that the specific ways in which people rediscover meaning--such as belief in traditional religious doctrine, the afterlife, reincarnation, philanthropy, or a spiritual order to the universe--may be less important than the process itself. In other words, in the midst of dealing with profound loss in our lives, the ability to reascribe meaning to a changed world through spiritual transformation, religious conversion, or existential change may be more significant than the specific content by which that need is filled. PMID:10558611

  7. Annuaire du Bureau des longitudes - 2006

    NASA Astrophysics Data System (ADS)

    Imcce; Bureau Des Longitudes

    2005-07-01

    This annual publication provides ephemerides and data to the use of professionnal and amateur astronomers. Divided in 11 chapters it covers concordance of various calendars, explanation of fondamental astronomy and various time scales, explanation for the use of ephemerides; tables provide ephemerides (positions, rise/set/passage) of the Sun and the Moon, planets, planetary satellites, asteroids, comets, bright stars; data and explanation for the physical observation of the surface of the Sun, the Moon, and planets; chart of the sky and a list of constellations and galaxies; prediction and ephemerides for astronomical phenomenon: occultation by the moon, stellar occultations by asteroids and appulses, solar eclipses and lunar eclipses; and an additional review about a hot scientific topic, this year: "Legendre et le méridien terrestre, 200 ans après". Cette publication annuelle fournit des éphémérides et des données à l'usage des astronomes professionnels et des astronomes amateurs. Composée de 11 chapitres elle comprend les rubriques sur les différents calendriers et leurs concordance, les fêtes légales en France, les dates et décrets sur les heures légales en France métropolitaine ; une introduction à l'astronomie fondamentale et aux différentes échelles de temps, des explications sur l'utilisation des éphémérides ; des tables fournissent les éphémérides (positions, heures de lever/coucher/passage) du Soleil et de la Lune, de planètes, de satellites naturels, d'astéroïdes, de comètes, d'étoiles brillantes ; des données pour l'observation de la surface du Soleil, de la Lune, et des planètes ; des cartes du ciel ainsi qu'une liste de constellations et de galaxies ; des prédictions des phénomènes astronomiques : occultation par la Lune, occultation stellaires par des astéroïdes et appulses, éclipses de Soleil et de la Lune; la liste et les coordonnées des observatoires astronomiques les plus connus ; et enfin un cahier th

  8. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.Allen; Ahuett-Garza, Horacio; Choudhury, Aswin K.; Dedhia, Sanjay

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects or problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  9. Transport quantique dans des nanostructures

    NASA Astrophysics Data System (ADS)

    Naud, C.

    2002-09-01

    structure des oscillations de conductance en fonction du flux du champ magnétique de période h/e dont l'amplitude est beaucoup plus importante que celle mesurée sur un réseau carré de même dimension. Cette différence constitue une signature d'un effet de localisation induit par le champ magnétique sur la topologie mathcal{T}3. Pour des valeurs spécifiques du champ magnétique, du fait des interférences destructives Aharonov-Bohm, la propagation des fonctions d'ondes est limitée à un ensemble fini de cellule du réseau appelé cage. De la dépendance en température des oscillations de période h/e mesurées sur le réseau mathcal{T}3 nous avons tiré une longueur caractéristique qui peut être rattachée au périmètre des cages. Un phénomène inattendu fut l'observation, pour des champs magnétiques plus importants, d'un doublement de fréquence des oscillations. Ces oscillations de période h/2e pouvant avoir une amplitude supérieure aux oscillations de période h/e, une interprétation en terme d'harmonique n'est pas possible. Enfin, l'influence de la largeur électrique des fils constituant le réseau et donc celle du nombre de canaux par brin a été étudiée en réalisant des grilles électrostatique. Les variations de l'amplitude des signaux en h/e et h/2e en fonction de la tension de grille ont été mesurés.

  10. Treatment-resistant major depressive disorder and assisted dying.

    PubMed

    Schuklenk, Udo; van de Vathorst, Suzanne

    2015-08-01

    Competent patients suffering from treatment-resistant depressive disorder should be treated no different in the context of assisted dying to other patients suffering from chronic conditions that render their lives permanently not worth living to them. Jurisdictions that are considering, or that have, decriminalised assisted dying are discriminating unfairly against patients suffering from treatment-resistant depression if they exclude such patients from the class of citizens entitled to receive assistance in dying. PMID:25935906

  11. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  12. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  13. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  14. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  15. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  16. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  17. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  18. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  19. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  20. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no tools more mechanical than hand tools and vise....

  1. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  2. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  3. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  4. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will be used where the marker is a Navajo Indian;...

  5. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by and owned by the Indian Arts and Crafts...

  6. MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL SHOWING INSCRIPTION ON FRONT ELEVATION. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  7. The duty to die and the burdensomeness of living.

    PubMed

    Cholbi, Michael

    2010-10-01

    This article addresses the question of whether the arguments for a duty to die given by John Hardwig, the most prominent philosophical advocate of such a duty, are sound. Hardwig believes that the duty to die is relatively widespread among those with burdensome illnesses, dependencies, or medical conditions. I argue that although there are rare circumstances in which individuals have a duty to die, the situations Hardwig describes are not among these. After reconstructing Hardwig's argument for such a duty, highlighting his central premise that ill, dependent, or aged individuals can impose unfair burdens upon others by continuing to live, I clarify precisely what Hardwig intends by his thesis that many of us have a duty to die. I then show that an important disanalogy exists between an uncontroversial example in which an individual has a duty to die and the situations in which Hardwig proposes individuals have a duty to die. More specifically, in situations where a duty to die exists, an individual's having a duty to die logically implies that those she burdens have a right to kill that individual in self-defense. I then suggest that the burdens that ill, dependent, or aged individuals impose on their families, loved ones, or caregivers do not constitute the kind of threat that warrants the latter killing the former in self-defense. Hence, the duty to die is much rarer than Hardwig supposes. PMID:19222438

  8. Development of intelligent CAD/CAM systems for progressive dies

    NASA Astrophysics Data System (ADS)

    Wang, Fengyin; Xiao, Xia; Li, Jianjun

    1995-08-01

    This paper focuses on the fundamental issues related to the development of intelligent CAD/CAM systems for progressive dies which are used for manufacturing sheet metal parts in mass production. The CAD/CAM functions for sheet metal product design and those for design and manufacture of progressive dies are defined by studying the sheet-metal-product life cycle. The procedures of industrial design and manufacture of progressive dies are reviewed, and the need for intelligent CAD/CAM systems identified. The platforms, environment, and key technologies for the systems design and implementation are discussed. Finally, a prototype CAD/CAM system for progressive dies is introduced.

  9. HIV transcription is induced in dying cells

    SciTech Connect

    Woloschak, G.E.; Chang-Liu, Chin-Mei; Schreck, S. |; Panozzo, J.; Libertin, C.R.

    1996-02-01

    Using HeLa cells stably transfected with an HIV-LTR-CAT construct, we demonstrated a peak in CAT induction that occurs in viable (but not necessarily cell-division-competent) cells 24 h following exposure to some cell-killing agents. {gamma} rays were the only cell-killing agent which did not induce HIV transcription; this can be attributed to the fact that {gamma}-ray-induced apoptotic death requires functional p53, which is not present in HeLa cells. For all other agents, HIV-LTR induction was dose-dependent and correlated with the amount of cell killing that occurred in the culture. Doses which caused over 99% cell killing induced HIV-LTR transcription maximally, demonstrating that cells that will go on to die by 14 days are the cells expressing HIV-LTR-CAT.

  10. Hubble's View of a Dying Star

    NASA Technical Reports Server (NTRS)

    2003-01-01

    A recent image of a dying star containing strange, complex structures may help explain the death throes of stars and defy our current understanding of physics. The image of protoplanetary nebula IRAS22036+5306 (in the Infrared Astronomical Satellite Point Source Catalog) was taken on Dec. 15, 2001, by the Wide Field and Planetary Camera 2, designed and built by NASA's Jet Propulsion Laboratory, onboard NASA's Hubble Space Telescope. It is one of the best images yet to capture a fleeting period at the end of a Sun-like star's life, called the protoplanetary nebula phase.

    This phase, which looks like a beautiful cloud of glowing gas lit up by ultraviolet light from the star's core, results when a star evolves into a bloated red giant and sheds its outer layers. 'Protoplanetary nebulas are rare objects with short lifetimes,' said JPL astrophysicist Dr. Raghvendra Sahai. 'It has generally been very difficult to obtain images of such objects in which their structure can be resolved in detail.'

    This image is particularly important because it contains a series of what Sahai and his colleagues call 'knotty jets,' blob-like objects emerging along roughly straight lines from the center of the cigar-shaped, bipolar nebula (See insets). There are various theories about what may produce such jets, though it is hard to prove their existence due to their short-lived, episodic nature. Detailed multi-wavelength studies of these nebulas with NASA's Great Observatories are being carried out to understand the nature and origin of these enigmatic jets, and how they may be sculpting shrouds of dying stars into exotic shapes. The Hubble Space Telescope is one of NASA's Great Observatories.

  11. Death and dying: what the patient wants.

    PubMed

    Balducci, L

    2012-04-01

    A good death and a death with dignity may be achieved when death is congruent with the personal values of the patient. It behooves the practitioner to recognize these values and to cater to them. This paper describes effective communication with the dying person, and the partnership of treatment team, patient and family in face of the patient death. To identify and define the patient wishes it is necessary to learn how to interpret the patient's non verbal as often patients are unable to formulate the questions they wish to ask concerning their passing. These difficulties stem from several cultural factors including concern about disturbing the practitioner. It is the treatment team's responsibility to facilitate this discussion. A good death is achieved when symptoms are controlled and when patients and family recognize death as a unique living experience to be treasured as any other living experience. A death with dignity brings healing, that is always possible even when cure is out of reach. Patient's and practitioner's values may be at odd in face of controversial issues including euthanasia, assisted suicide and terminal sedation. Though he/she should not be compelled to execute these requests, the practitioner should be able to entertain an open discussion with the patient concerning these issues. Open communication and reflective listening even in presence of disagreements are the venue of healing. The study of death and dying requires novel approaches including personal narrative and qualitative research to complement traditional research instrument, such as questionnaire that cannot embrace the whole human dimension. PMID:22628417

  12. Clinical Criteria for Physician Aid in Dying.

    PubMed

    Orentlicher, David; Pope, Thaddeus Mason; Rich, Ben A

    2016-03-01

    More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  13. Clinical Criteria for Physician Aid in Dying

    PubMed Central

    Pope, Thaddeus Mason; Rich, Ben A.

    2016-01-01

    Abstract More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  14. L-connect routing of die surface pads to the die edge for stacking in a 3D array

    DOEpatents

    Petersen, Robert W.

    2000-01-01

    Integrated circuit chips and method of routing the interface pads from the face of the chip or die to one or more sidewall surfaces of the die. The interconnection is routed from the face of the die to one or more edges of the die, then routed over the edge of the die and onto the side surface. A new pad is then formed on the sidewall surface, which allows multiple die or chips to be stacked in a three-dimensional array, while enabling follow-on signal routing from the sidewall pads. The routing of the interconnects and formation of the sidewall pads can be carried out in an L-connect or L-shaped routing configuration, using a metalization process such as laser pantography.

  15. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  16. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  17. Sequence analysis of peste des petits ruminants virus from ibexes in Xinjiang, China.

    PubMed

    Xia, J; Zheng, X G; Adili, G Z; Wei, Y R; Ma, W G; Xue, X M; Mi, X Y; Yi, Z; Chen, S J; Du, W; Muhan, M; Duhaxi, C; Han, T; Gudai, B; Huang, J

    2016-01-01

    Peste des petits ruminants (PPR) is an infectious disease caused by peste des petits ruminants virus (PPRV). While PPR mainly affects domestic goats and sheep, it also affects wild ungulates such as ibex, blue sheep, and gazelle, although there are few reports regarding PPRV infection in wild animals. Between January 2015 and February 2015, it was found for the first time that wild ibexes died from PPRV infection in Bazhou, Xinjiang, China, where a total of 38 ibexes (including young and adult ibexes) were found to have died abnormally from PPR-related issues. First, we tested for the presence of the F gene of PPRV by RT-PCR. Then, we compared the sequence of the isolated F gene from the ibex strain, termed PPRV Xinjiang/Ibex/2015, with those previously identified from small domestic ruminants from local areas near where the reported isolate was collected as well as those from other regions. The current sequence was phylogenetically classified as a lineage IV virus, and shared a high level of sequence identity (99.7%) with a previously described Xinjiang PPRV isolate. PMID:27323119

  18. Claudius Ptolemäus: Der Sternkatalog des Almagest. Die arabisch-mittelalterliche Tradition. II. Die lateinische Übersetzung Gerhards von Cremona.

    NASA Astrophysics Data System (ADS)

    Kunitzsch, P.

    This book is the second volume in P. Kunitzsch's Ptolemy project. It presents the text edition of Ptolemy's star catalogue in the Latin translation from the Arabic of Gerhard von Cremona (Toledo, ca. 1150 - 1180). The first volume, containing a German translation and the Arabic text of the catalogue, was published in 1986 (42.003.021).

  19. "Dying is dying, that's all": Structural violence and cultural projects in Malawian AIDS proverbs.

    PubMed

    Hayes, Nicole C

    2015-01-01

    This paper examines three Malawian proverbs about AIDS: "AIDS came for people", "Dying is dying, that's all" and "It's in the flour". Proverbs permit Malawians to discuss the otherwise taboo topic of AIDS because they offer a special register and perform a footing shift, a rhetorical manoeuvre that allows the speaker to attribute problematic speech to someone else. The proverbs under consideration convey a sense of powerless in the face of the AIDS epidemic, which is an indicator of the effects of structural violence on the everyday lives of most Malawians. Despite the aura of timeless tradition generally conveyed by proverbs, the author argues that individual Malawians are actually using AIDS proverbs to align themselves with the pursuit of gendered cultural projects, such as multiple concurrent partner sex and transactional sex, which are not traditional at all. PMID:26305155

  20. Regional ontogeny of New England salt marsh die-off.

    PubMed

    Coverdale, Tyler C; Bertness, Mark D; Altieri, Andrew H

    2013-10-01

    Coastal areas are among the world's most productive and highly affected ecosystems. Centuries of human activity on coastlines have led to overexploitation of marine predators, which in turn has led to cascading ecosystem-level effects. Human effects and approaches to mediating them, however, differ regionally due to gradients in biotic and abiotic factors. Salt marsh die-off on Cape Cod, Massachusetts (U.S.A.), triggered by a recreational-fishing-induced trophic cascade that has released herbivorous crabs from predator control, has been ongoing since 1976. Similar salt marsh die-offs have been reported in Long Island Sound and Narragansett Bay (U.S.A.), but the driving mechanism of these die-offs has not been examined. We used field experiments to assess trophic interactions and historical reconstructions of 24 New England marshes to test the hypotheses that recreational fishing and predator depletion are a regional trigger of salt marsh die-off in New England and that die-offs in Long Island Sound and Narragansett Bay are more recent than those on Cape Cod. Predator depletion was the general trigger of marsh die-off and explained differences in herbivorous crab abundance and the severity of die-off across regions. Die-offs in Long Island Sound and Narragansett Bay are following a trajectory similar to die-off on Cape Cod, but are approximately 20 years behind those on Cape Cod. As a result, die-off currently affects 31.2% (SE 2.2) of low-marsh areas in Long Island Sound and Narragansett Bay, less than half the severity of die-off on Cape Cod. Our results contribute to the growing evidence that recreational fishing is an increasing threat to coastal ecosystems and that studying the effects of human activity at regional scales can provide insight into local effects and aid in early detection and potential remediation. PMID:23566036

  1. Can We Humanize Dying in the General Hospital?

    ERIC Educational Resources Information Center

    Fleming, Stephen

    This paper reviews the literature on the behavior and attitudes of medical-nursing personnel toward the dying person and illustrates the frequent conflict between hospital staff and the needs of dying. Inner perturbation stemming from feelings of vicarious suffering, vicarious disintegration, or personal anxiety about death, education deficiencies…

  2. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  3. Potato Early Dying: Molecular Perspectives on Pathogenicity and Host Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Potato early dying has not received the reputation of being a particularly devastating disease of potato. However, the interaction between the vascular fungus Verticillium dahliae and the root lesion nematode Pratylenchus penetrans to form the early dying complex makes studying this disease very in...

  4. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  5. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  6. 5 Ways to Cope When a Loved One Dies

    MedlinePlus

    ... Cuts? 5 Ways to Cope When a Loved One Dies KidsHealth > For Teens > 5 Ways to Cope When a Loved One Dies Print A A A Text Size en ... presence of other people who knew your loved one can be comforting. Let your emotions be expressed ...

  7. Thoughts about Death and Dying in an African Sample.

    ERIC Educational Resources Information Center

    Gijana, E. W. M.; And Others

    1990-01-01

    Examined attitudes toward death and dying among 163 Xhosa-speaking children and adults in South Africa. Found age, gender, belief in life after death, educational level, and exposure to death and dying were critical factors in formation of attitudes. Findings were similar to those from previous studies in African and western societies. (Author/NB)

  8. Living and Dying: A Window on (Christian) Children's Spirituality

    ERIC Educational Resources Information Center

    Champagne, Elaine

    2008-01-01

    Faith and beliefs about living and dying are fundamental constituents of spiritual development. However, children are seldom asked to talk about their experiences of life and death. This article has a twofold purpose. It first describes children's expressions on living and dying, as heard during a newly developed programme which encourages…

  9. Die Materials for Critical Applications and Increased Production Rates

    SciTech Connect

    David Schwam; John Wallace; Sebastian Birceanu

    2002-11-30

    Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

  10. The design of a die with a vacuum thermal insulation

    NASA Astrophysics Data System (ADS)

    Baginski, A. G.; Utyev, O. M.; Kondratyeva, Y. M.

    2016-04-01

    A new design of a die for the polymer underwater granulation plants has been developed. It differs from similar plants in the design of heat-insulating elements. Vacuum hollows are used as a heat insulator. A vacuumization process does not require a separate operation, and it is conducted simultaneously with connection of all the elements of the die by a brazing method.

  11. Etude des effets du martelage repetitif sur les contraintes residuelles

    NASA Astrophysics Data System (ADS)

    Hacini, Lyes

    L'assemblage par soudage peut engendrer des contraintes residuelles. Ces contraintes provoquent des fissurations prematurees et un raccourcissement de la duree de vie des composants. Dans ce contexte, le martelage robotise est utilise pour relaxer ces contraintes residuelles. Trois volets sont presentes: le premier est l'evaluation des effets des impacts unitaires repetes sur le champ de contraintes developpe dans des plaques d'acier inoxydable austenitique 304L vierges ou contenant des contraintes residuelles initiales. Dans la deuxieme partie de ce projet, le martelage est applique grace au robot SCOMPI. Les contraintes residuelles induites et relaxees par martelage sont ensuite mesurees par la methode des contours, qui a ete adaptee a cet effet. Dans la troisieme partie, le martelage est modelise par la methode des elements finis. Un modele axisymetrique developpe grace au logiciel ANSYS permet de simuler des impacts repetes d'un marteau elastique sur une plaque ayant un comportement elastoplastique.

  12. Die Casting Part Distortion: Prediction and Attenuation

    SciTech Connect

    Dr, R. Allen Miller

    2002-02-12

    The goal of this research was to predict the part deformation and residual stresses after ejection from the die and cooling to room temperature. A finite element model was built to achieve this goal and several modeling techniques were investigated throughout this research. Die-casting is a very complex process and the researchers are faced with a large number of hard to solve physical problems when modeling the process. Several assumptions are made in our simulation model. The first significant assumption is the instantaneous cavity filling. This means that the cavity filling stage is not considered in our model. Considering the cavity filling stage increases the modeling complexity as a result of different flow patterns. expected in the shot sleeve, gate, runner and different cavity features. The flow of gas from the cavity through the vents is another problem that is ignored in our model as a result of this assumption. Our second assumption is that the cast metal has uniform temperature distribution inside the cavity, at the starting point of simulation. This temperature is assumed to be over liquidus limit, i.e. the solid fraction is 0.0% of the cast metal. The third assumption is due to ABAQUS (commercial software used in this research) limitations. ABAQUS cannot deal with multi-phase models; therefore we use solid elements to define the casting instead of multi-phase (liquid/solid) elements. Liquid elements can carry the hydrostatic pressure from the shot sleeve and apply it on the cavity surfaces, while the solid elements do not have this capability. To compensate for this assumption we add the cavity pressure as a boundary condition and apply it on the cavity surface separately from the part. Another issue with this assumption is that, liquid casting can follow the cavity shape when it distorts. With the use of solid elements to represent the casting during its liquid state, it loses this capability to follow the cavity. Several techniques were tested to

  13. Einführung in die Technische Chemie

    NASA Astrophysics Data System (ADS)

    Behr, Arno; Agar, David W.; Jörissen, Jakob

    Die "Technische Chemie" ist ein Lehrfach an Universitäten und Hochschulen. Nach dem die Studierenden der Chemie in den ersten Semestern ihres Studiums ausrei chen de theoretische Kenntnisse in Allgemeiner, Anorganischer, Organischer und Physikalischer Chemie erlangt haben, soll die Technische Chemie einen Blick auf die praktische Anwendung dieser Naturwissenschaft in unserer Wirtschaft lenken. Es gibt keine "biologische Industrie", "physikalische Industrie" oder "mathematische Industrie", wohl aber seit über 150 Jahren eine "chemische Industrie", die in dieser lan gen Zeit zahlreiche chemische Prozesse entwickelt und dazu vielfältige Methoden erarbeitet hat. Das Lehrfach Technische Chemie gibt einen Überblick über diese Pro zesse und Methoden und erleichtert dadurch den Schritt von der Universität zur be ruflichen Praxis.

  14. Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

    SciTech Connect

    David Schwam; John F. Wallace; Quanyou Zhou

    2002-01-30

    An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

  15. Compassion in Dying v. State of Washington.

    PubMed

    1996-03-01

    The U.S. Court of Appeals for the Ninth Circuit, sitting en banc, affirmed a district court judgment that ruled unconstitutional a Washington statute banning assisted suicide, as applied to competent, terminally ill adults who wish to obtain prescription medication to hasten their deaths. The statute, which was challenged by a group of patients, physicians, and the nonprofit organization Compassion in Dying, was held to be unconstitutional because it violated the due process clause of the U.S. Constitution. The court took into consideration the interests of the state in protecting life, preventing suicides, preventing undue, arbitrary, or unfair influences on an individual's decision to end his life, and ensuring the integrity of the medical profession. These interests were balanced against an individual's strong liberty interest in determining how and when one's life should end. The court recognized this interest after assessing the growing public support for assisted suicide, changes in the causes of death and medical advances, and Supreme Court cases addressing due process liberty interests. The court then determined that the state's interest, which could be protected by adopting sufficient safeguards, did not outweigh the severe burden placed on the terminally ill, and thus the statute as applied was unconstitutional. PMID:11648417

  16. NICMOS PEERS INTO HEART OF DYING STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

  17. Compaction die for forming a solid annulus on a right circular cylinder. [Patent application

    DOEpatents

    Harlow, J.L.

    1981-09-14

    A compacting die is disclosed wherein the improvement comprises providing a screen in the die cavity, the screen being positioned parallel to the side walls of said die and dividing the die cavity into center and annular compartments. In addition, the use of this die in a method for producing an annular clad ceramic fuel material is disclosed.

  18. Determination of the metal/die interfacial heat transfer coefficient of high pressure die cast B390 alloy

    NASA Astrophysics Data System (ADS)

    Cao, Yongyou; Guo, Zhipeng; Xiong, Shoumei

    2012-07-01

    High-pressure die cast B390 alloy was prepared on a 350 ton cold chamber die casting machine. The metal/die interfacial heat transfer coefficient of the alloy was investigated. Considering the filling process, a "finger"-shaped casting was designed for the experiments. This casting consisted of five plates with different thicknesses (0.05 inch or 1.27 mm to 0.25 inch or 6.35 mm) as well as individual ingates and overflows. Experiments under various operation conditions were conducted, and temperatures were measured at various specific locations inside the die. Based on the results, the interfacial heat transfer coefficient and heat flux were determined by solving the inverse heat transfer problem. The influence of the mold-filling sequence, sensor locations, as well as processing parameters including the casting pressure, die temperature, and fast/slow shot speeds on the heat transfer coefficient were discussed.

  19. De-tabooing dying control - a grounded theory study

    PubMed Central

    2013-01-01

    Background Dying is inescapable yet remains a neglected issue in modern health care. The research question in this study was “what is going on in the field of dying today?” What emerged was to eventually present a grounded theory of control of dying focusing specifically on how people react in relation to issues about euthanasia and physician-assisted suicide (PAS). Methods Classic grounded theory was used to analyze interviews with 55 laypersons and health care professionals in North America and Europe, surveys on attitudes to PAS among physicians and the Swedish general public, and scientific literature, North American discussion forum websites, and news sites. Results Open awareness of the nature and timing of a patient’s death became common in health care during the 1960s in the Western world. Open dying awareness contexts can be seen as the start of a weakening of a taboo towards controlled dying called de-tabooing. The growth of the hospice movement and palliative care, but also the legalization of euthanasia and PAS in the Benelux countries, and PAS in Montana, Oregon and Washington further represents de-tabooing dying control. An attitude positioning between the taboo of dying control and a growing taboo against questioning patient autonomy and self-determination called de-paternalizing is another aspect of de-tabooing. When confronted with a taboo, people first react emotionally based on “gut feelings” - emotional positioning. This is followed by reasoning and label wrestling using euphemisms and dysphemisms - reflective positioning. Rarely is de-tabooing unconditional but enabled by stipulated positioning as in soft laws (palliative care guidelines) and hard laws (euthanasia/PAS legislation). From a global perspective three shapes of dying control emerge. First, suboptimal palliative care in closed awareness contexts seen in Asian, Islamic and Latin cultures, called closed dying. Second, palliative care and sedation therapy, but not euthanasia

  20. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 4 2012-07-01 2012-07-01 false Must we pay death-related expenses for an employee who dies while on leave, or who dies on a nonworkday while on TDY or... we pay death-related expenses for an employee who dies while on leave, or who dies on a...

  1. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 4 2013-07-01 2012-07-01 true Must we pay death-related expenses for an employee who dies while on leave, or who dies on a nonworkday while on TDY or stationed... we pay death-related expenses for an employee who dies while on leave, or who dies on a...

  2. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a non...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-related expenses for an employee who dies while on leave, or who dies on a non-workday, while on temporary... MEMBERS General Policies § 303-70.3 Must we pay death-related expenses for an employee who dies while on leave, or who dies on a non-workday, while on temporary duty (TDY) or stationed OCONUS? Yes,...

  3. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false Must we pay death-related expenses for an employee who dies while on leave, or who dies on a nonworkday while on TDY or... we pay death-related expenses for an employee who dies while on leave, or who dies on a...

  4. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 4 2011-07-01 2011-07-01 false Must we pay death-related expenses for an employee who dies while on leave, or who dies on a nonworkday while on TDY or... we pay death-related expenses for an employee who dies while on leave, or who dies on a...

  5. Simulating the deformation of dies in the foundry

    NASA Astrophysics Data System (ADS)

    Chabod, A.; Longa, Y.; Dracon, J. M.; Chailler, K.; Hairy, P.; Da Silva, A.

    2012-07-01

    Digital simulation (QuikCAST, ProCAST) is already used extensively when designing metallic dies for founding, in particular to design filling and gating systems. Simulation of the steady-state temperature cycles of dies has also been mastered. With large castings, the temperature gradient induced between the moulding surface and the rear surfaces of the die leads to deformations that may be large enough to measure, and incompatible with the required dimensional accuracy. The temperature gradient also creates thermal fatigue stresses that cause crazing of the die surface. In the study conducted by CTIF, aimed at measuring tooling deformations, various ways of measuring displacements at high temperatures (with and without contact) were investigated in order to evaluate their capabilities and limitations. An experimental device was designed - a test bench combining a metallic die having a simple geometry, in which an aluminium part could be cast, and instrumentation (temperature and displacement sensors). The deformations of the die were measured during first cycles of temperature homogenization. Concurrently, thermomechanical calculations were carried out on the same geometry using PROCAST. The calculation results are well correlated with the experimental measurements and validate the tools and the calculation methods. This thermomechanical approach makes it possible to optimize die design in the foundry and to predict high-temperature deformations as early as the design stage. Knowledge of these deformations makes it possible in turn to anticipate the geometrical and dimensional variations undergone by the castings themselves and so to improve their accuracy. The designer can act on the temperature of the die or the design of the casting, or create a die in which the expected thermal deformation is reversed so as to produce a casting having the correct dimensions. In short, thermomechanical simulation can be applied to this problem to achieve a better understanding

  6. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    % in AM50 to over 9% in AZ91, more of the intermetallic Mg17Al12 is formed in the microstructure. For instance, for 15 increase in the aluminum content from AM50 to AM60, the volume fraction of eutectic present in the microstructure increases by 35%! Eventually, the brittle Mg17Al12 compound forms an interconnected network that reduces ductility and impact resistance. The lower aluminum in AM50 and AM60 are therefore a desirable feature in applications that call for higher impact resistance. Further improvement in impact resistance depends on the processing condition of the casting. Sound castings without porosity and impurities will have better mechanical properties. Since magnesium oxidizes readily, good melting and metal transfer practices are essential. The liquid metal has to be protected from oxidation at all times and entrainment of oxide films in the casting needs to be prevented. In this regard, there is evidence that us of vacuum to evacuate air from the die casting cavity can improve the quality of the castings. Fast cooling rates, leading to smaller grain size are beneficial and promote superior mechanical properties. Micro-segregation and banding are two additional defect types often encountered in magnesium alloys, in particular in AZ91D. While difficult to eliminate, segregation can be minimized by careful thermal management of the dies and the shot sleeve. A major source of segregation is the premature solidification in the shot sleeve. The primary solid dendrites are carried into the casting and form a heterogeneous structure. Furthermore, during the shot, segregation banding can occur. The remedies for this kind of defects include a hotter shot sleeve, use of insulating coatings on the shot sleeve and a short lag time between pouring into the shot sleeve and the shot.

  7. Cometary Knots Around A Dying Star

    NASA Technical Reports Server (NTRS)

    1994-01-01

    These gigantic, tadpole-shaped objects are probably the result of a dying star's last gasps. Dubbed 'cometary knots' because their glowing heads and gossamer tails resemble comets, the gaseous objects probably were formed during a star's final stages of life. Hubble astronomer C. Robert O'Dell and graduate student Kerry P. Handron of Rice University in Houston, Texas discovered thousands of these knots with the Hubble Space Telescope while exploring the Helix nebula, the closest planetary nebula to Earth at 450 light-years away in the constellation Aquarius. Although ground-based telescopes have revealed such objects, astronomers have never seen so many of them. The most visible knots all lie along the inner edge of the doomed star's ring, trillions of miles away from the star's nucleus. Although these gaseous knots appear small, they're actually huge. Each gaseous head is at least twice the size of our solar system; each tail stretches for 100 billion miles, about 1,000 times the distance between the Earth and the Sun. Astronomers theorize that the doomed star spews hot, lower-density gas from its surface, which collides with cooler, higher-density gas that had been ejected 10,000 years before. The crash fragments the smooth cloud surrounding the star into smaller, denser finger-like droplets, like dripping paint. This image was taken in August, 1994 with Hubble's Wide Field Planetary Camera 2. The red light depicts nitrogen emission ([NII] 6584A); green, hydrogen (H-alpha, 6563A); and blue, oxygen (5007A).

  8. Peste des Petits Ruminants Virus.

    PubMed

    Baron, M D; Diallo, A; Lancelot, R; Libeau, G

    2016-01-01

    Peste des petits ruminants virus (PPRV) causes a severe contagious disease of sheep and goats and has spread extensively through the developing world. Because of its disproportionately large impact on the livelihoods of low-income livestock keepers, and the availability of effective vaccines and good diagnostics, the virus is being targeted for global control and eventual eradication. In this review we examine the origin of the virus and its current distribution, and the factors that have led international organizations to conclude that it is eradicable. We also review recent progress in the molecular and cellular biology of the virus and consider areas where further research is required to support the efforts being made by national, regional, and international bodies to tackle this growing threat. PMID:27112279

  9. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  10. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  11. Understandings of death and dying for people of Chinese origin.

    PubMed

    Hsu, Chiung-yin; O'Connor, Margaret; Lee, Susan

    2009-02-01

    This article introduces the primary beliefs about ancestor worship, Taoism, Confucianism, Buddhism and traditional Chinese medicine that have influenced Chinese people for thousands of years, particularly in relation to death and dying. These cultures and traditions remain important for Chinese people wherever they live. Over a long period, Chinese people have integrated these philosophies and religions to form the basis of their culture and traditions. Although they agree that death is a natural part of the life span, a unique belief about death and dying has emerged among the Chinese from this integration. From this, the people find a significant definition of death and dying. PMID:19143109

  12. Erythrocyte nuclei resemble dying neurons in embryonic dorsal root ganglia.

    PubMed

    Coggeshall, R E; Pover, C M; Kwiat, G C; Fitzgerald, M

    1993-07-01

    Cell death or apoptosis is regarded as an important feature of mammalian neural development, but the evidence for this generalization depends on the assumption that cell death can be clearly recognized. The usual profile of a dying neuron is a deeply stained pyknotic homogeneous sphere. In this paper we present evidence that such profiles in embryonic rat T6 and L4 dorsal root ganglia are not dying neurons but rather nuclei of immature red blood cells. This observation, combined with recent work showing that the methods previously used for counting normal or dying neurons are biased, indicates that the classic work establishing the importance of apoptosis needs to be repeated. PMID:8233029

  13. The enhancement of existing DES Maplet interface

    NASA Astrophysics Data System (ADS)

    Abdullah, Nur Lina; Mutalip, Rasidah Abdull; Abdullah, Kamilah

    2014-07-01

    This study pertains to the process of Data Encryption Standard, DES. DES consists of encryption and decryption processes linked with mathematical elements such as algebra and number theory. Preliminary, studies revealed that most of mathematics students face a problem in understanding the complicated process of DES. In modern learning methods, learning environment becomes more interesting with the use of computer and a variety of mathematical software packages. Several mathematical softwares such as Maple, Mathematica, Mathlab and Sage were developed in order to fulfill the specific calculation requirements. Correspondingly, motivated from that, this study incorporated with Maple to enhance the existing DES Maplet interface to be more interactive and user-friendly compared to the original version.

  14. Copernic: la piste des influences arabes

    NASA Astrophysics Data System (ADS)

    Khalatbari, A.; Bonnet-Bidaud, J. M.

    2004-10-01

    Copernic a-t-il connu le travail des astronomes du Moyen-Orient ? S'en est-il inspiré pour élaborer sa théorie de l'héliocentrisme ? C'est l'hypothèse avancée par certains historiens des sciences pour comprendre le génie de celui qui, le premier, a placé le Soleil au centre du monde. Enquête.

  15. Diffusion des Metaux et Evolution Stellaire

    NASA Astrophysics Data System (ADS)

    Turcotte, Sylvain

    Nous presentons dans cette these des modeles d'evolution stellaire incorporant la diffusion microscopique de maniere consistante. Pour la premiere fois, on a calcule l'evolution d'etoiles en tenant compte en detail de l'impact des variations d'abondances sur leur structure. Nous utilisons des spectres monochromatiques pour chacun des elements les plus abondants dans un melange solaire pour recalculer l'opacite pour les abondances et les conditions locales dans l'interieur d'une etoile au cours de son evolution. Nos modeles montrent que la diffusion atomique des metaux a un effet important sur les opacites dan les etoiles de plus de 1.3Msolar ou l'abondance du fer et des autres elements du pic du fer varient substantiellement. Ces etoiles, sans rotation ou champ magnetique, sont proches des etoiles de type Fm-Am dans lesquelles on observe une legere surabondance d'elements du pic du fer en plus d'une sous-abondance de calcium, sous-abondance que l'on obtient egalement. Nous obtenons cependant des surabondances depassant un facteur 10 pour les etoiles de plus de 1.4Msolar ce qui suggere qu'il existe un ou plusieurs mecanismes limitant la diffusion microscopique. La surabondance du fer en surface cause une augmentation, qui peut atteindre un facteur sept, de l'opacite a la limite de la zone convective. Ceci cause un accroissement de la temperature effective et de la masse de la zone convective comparativement aux modeles n'incluant que la diffusion de l'helium. Il s'agit la du principal effet de la diffusion sur la structure interne de ces etoiles. La diffusions n'a pas d'influence sur l'evolution de coeur stellaire dans les etoiles significativement plus massives quie le Soleil. Nous avons verife que l'utilisation de modeles consistants avec diffusion n'apporte pas d'amelioration sensible aux modeles solaires. Les forces radiatives calculees a partir des spectres d'OPAL pour les elements du pic du fer representent une fraction importante de la gravite. On obtient des

  16. 8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES MADE IN CARPENTER'S SHOP Ph: Jack E, Boucher - March 1961 - Joseph Carpenter Silversmith Shop, 71 East Town Street, Norwichtown, New London County, CT

  17. Chemical strategies for die/wafer submicron alignment and bonding.

    SciTech Connect

    Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

    2010-09-01

    This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

  18. FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, WITH HEADSTONES IN FOREGROUND. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  19. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in ...

  20. REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, LOOKING SOUTH ALONG EAST OBELISK ROAD. VIEW TO SOUTH. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  1. 33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY WITH CONCRETE CULVERT LEADING NORTH OUT OF RAVINE TOWARD JOHNSTON MEMORIAL SITE. VIEW NW. - Shiloh National Military Park Tour Roads, Shiloh, Hardin County, TN

  2. Characterization of Spray Lubricants for the Die Casting Process

    SciTech Connect

    Sabau, Adrian S

    2008-01-01

    During the die casting process, lubricants are sprayed in order to cool the dies and facilitate the ejection of the casting. The cooling effects of the die lubricant were investigated using Thermogravimetric analysis (TGA), heat flux sensors (HFS), and infrared imaging. The evolution of the heat flux and pictures taken using a high speed infrared camera revealed that lubricant application was a transient process. The short time response of the HFS allows the monitoring and data acquisition of the surface temperature and heat flux without additional data processing. A similar set of experiments was performed with deionized water in order to assess the lubricant effect. The high heat flux obtained at 300 C was attributed to the wetting and absorbant properties of the lubricant. Pictures of the spray cone and lubricant flow on the die were also used to explain the heat flux evolution.

  3. Child Dies in Hot Car Almost Once a Week

    MedlinePlus

    ... gov/news/fullstory_160479.html Child Dies in Hot Car Almost Once a Week Safe Kids Worldwide ... being left in a car that got too hot, according to Safe Kids Worldwide. Sometimes parents forget ...

  4. Einführung in die Renaturierungsökologie

    NASA Astrophysics Data System (ADS)

    Zerbe, Stefan; Wiegleb, Gerhard; Rosenthal, Gert

    Durch die übernutzung der Naturressourcen sind heute weltweit viele natürliche wie auch durch Kultur entstandene ökosysteme und Landschaften in ihren Funktionen und Leistungen stark beeinträchtigt oder sogar völlig zerstört. Bereits vor mehr als einem Jahrzehnt konstatierte (1995), dass ca. 45 % der terrestrischen Landoberfläche nur eine reduzierte Kapazität für die zukünftige Landnutzung haben. Als Grund hob er eine in der Vergangenheit nicht nachhaltige Landbewirtschaftung hervor. Mit einer gezielten Renaturierung der betroffenen ökosysteme soll dieser Trend umgekehrt werden (Harris und van Diggelen 2006). Vor diesem Hintergrund ist die ökosystemrenaturierung (ecological restoration) wichtiger Bestandteil der Planungs- und Naturschutzpraxis in Mitteleuropa und die Renaturierungsökologie (restoration ecology) zu einer eigenen wissenschaftlichen Arbeitsrichtung geworden.

  5. Coping with Grief: When a Loved One Dies

    MedlinePlus

    ... remarkably well after their loved one died. “Their level of depression, which was very high during the caregiving phase before the death, returned to almost normal levels within 6 months after the death,” Schulz says. ...

  6. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in...

  7. Experiences of Living and Dying With COPD

    PubMed Central

    Giacomini, M; DeJean, D; Simeonov, D; Smith, A

    2012-01-01

    Executive Summary In July 2010, the Medical Advisory Secretariat (MAS) began work on a Chronic Obstructive Pulmonary Disease (COPD) evidentiary framework, an evidence-based review of the literature surrounding treatment strategies for patients with COPD. This project emerged from a request by the Health System Strategy Division of the Ministry of Health and Long-Term Care that MAS provide them with an evidentiary platform on the effectiveness and cost-effectiveness of COPD interventions. After an initial review of health technology assessments and systematic reviews of COPD literature, and consultation with experts, MAS identified the following topics for analysis: vaccinations (influenza and pneumococcal), smoking cessation, multidisciplinary care, pulmonary rehabilitation, long-term oxygen therapy, noninvasive positive pressure ventilation for acute and chronic respiratory failure, hospital-at-home for acute exacerbations of COPD, and telehealth (including telemonitoring and telephone support). Evidence-based analyses were prepared for each of these topics. For each technology, an economic analysis was also completed where appropriate. In addition, a review of the qualitative literature on patient, caregiver, and provider perspectives on living and dying with COPD was conducted, as were reviews of the qualitative literature on each of the technologies included in these analyses. The Chronic Obstructive Pulmonary Disease Mega-Analysis series is made up of the following reports, which can be publicly accessed at the MAS website at: http://www.hqontario.ca/en/mas/mas_ohtas_mn.html. Chronic Obstructive Pulmonary Disease (COPD) Evidentiary Framework Influenza and Pneumococcal Vaccinations for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Smoking Cessation for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Community-Based Multidisciplinary Care for Patients With Stable Chronic Obstructive

  8. Microstructures and properties of aluminum die casting alloys

    SciTech Connect

    M. M. Makhlouf; D. Apelian; L. Wang

    1998-10-01

    This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

  9. Aid-in-dying: issues and implications for nursing.

    PubMed

    Johnson, R A; Weiler, K

    1990-01-01

    A debate format describes questions arising from the Model Aid-in-Dying Act, drafted at the University of Iowa's College of Law, and the implications for nurses. The Act allows patients or their named surrogates to demand or request active aid-in-dying. The Act requires nurses and other health care providers to comply with the qualified patient's demand unless the health care provider is a registered conscientious objector. PMID:2229721

  10. SiC Die Attach for High-Temperature Applications

    NASA Astrophysics Data System (ADS)

    Drevin-Bazin, A.; Lacroix, F.; Barbot, J.-F.

    2013-11-01

    Eutectic solders AuIn19 and AuGe12 and nanosilver paste were investigated for SiC die attach in high-temperature (300°C) applications. The soldering or sintering conditions were optimized through die shear tests performed at room temperature. In particular, application of static pressure (3.5 MPa) during sintering resulted in greatly improved mechanical behavior of the nanosilver-based joint. Microstructural study of the eutectic solders showed formation of Au-rich grains in AuGe die attach and significant diffusion of Au and In through the Ni layer in AuIn19 die attach, which could lead to formation of intermetallic compounds. Die shear tests versus temperature showed that the behaviors of the studied die attaches are different; nevertheless they present suitable shear strengths required for high-temperature applications. The mechanical behavior of joints under various levels of thermal and mechanical stress was also studied. Creep experiments were carried out on the eutectic solders to describe the thermomechanical behavior of the complete module; only one creep mechanism was observed in the working range.

  11. Optimum pinch grips in the handling of dies.

    PubMed

    Heffernan, C; Freivalds, A

    2000-08-01

    Handling roller-press dies has caused numerous work-related musculoskeletal disorders in the leather industry. The dies are quite large (0.61 x 0.30 m), heavy (3.5 kg) and are difficult to handle because of the large pinch span requirements (up to 16 cm). The purpose of this study was to determine the optimum pinch span and optimum crossbar angulation to minimize die handling forces. Five-finger pulp-pinch forces were measured on five males and five females with a force-sensitive-resistor instrumented glove while handling a simulated adjustable die. Maximum pinch forces occurred at pinch spans between 1.27 and 3.81 cm, with average female strengths being 57% of average male pinch strengths. Minimum pinch forces to hold the die occurred at a 45 degrees angulation and increased linearly as the angle approached 90 degrees or the normal vertical orientation. The simplest solution to redesigning the dies is to: (1) decrease the distance between the braces to less than 4 cm and (2) slant the braces at 45 degrees. PMID:10975667

  12. Die Face Engineering based Springback Compensation Strategy and Implementation

    SciTech Connect

    Tang, Arthur; Lee Wing; He, Jeanne; Xu Jinbo; Liu Kesu; Chen Chinchun

    2005-08-05

    Springback or shape change has been one of the major challenges in sheet metal fabrication, particularly with increase application of high strength steel (HSS) and aluminum alloys in automotive stamping. Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Minor or mild springback usually can be corrected in the re-strike process. Excessive springback must be corrected so the part will be produced within the given design tolerance and dimension. The commonly used Spring Forward approaches and shape compensations such as over-crown and over-bending are proven effective to alleviate excessive springback. To enhance these approaches, a new strategy of Die Face Engineering (DFE) based processing is proposed to quickly and easily to achieve the maximum allowable compensation using the under cut (or die lock) as the primary criteria. The implementation of the die face compensation through iterative FEA calculation, automatic surface mapping, projection and manual morphing are crucial to meet production environment requirements in terms of generating NC quality CAD surfaces of the compensated or morphed die face. In this paper, the strategy of the die face compensation with the consideration of the under cut criteria is presented. The implementation of various processes to enable user to perform the die face compensation task in a production environment is also discussed. Finally, two examples are shown to demonstrate the implementation of the proposed springback compensation scheme based on the combined CAE/CAD methodology.

  13. Implementation of reflected light die-to-die inspection and ReviewSmart to improve 65nm DRAM mask fabrication

    NASA Astrophysics Data System (ADS)

    Kim, Do Young; Cho, Won Il; Park, Jin Hyung; Chung, Dong Hoon; Cha, Byung Chul; Choi, Seong Woon; Han, Woo Sung; Park, Ki Hun; Kim, Nam Wook; Hess, Carl; Ma, Weimin; Kim, David

    2005-11-01

    As the design rule continues to shrink towards 65nm size and beyond the defect criteria are becoming ever more challenging. Pattern fidelity and reticle defects that were once considered as insignificant or nuisance are now becoming significant yield impacting defects. The intent of this study is to utilize the new generation DUV system to compare Die-to-Die Reflected Light inspection and Die-to-Die Transmitted Light Inspection to increase defect detection for optimization of the 65nm node process. In addition, the ReviewSmart will be implemented to help categorically identify systematic tool and process variations and thus allowing user to expedite the learning process to develop a production worthy 65nm node mask process. The learning will be applied to Samsung's pattern inspection strategy, complementing Transmitted Light Inspection, on critical layers of 65 nm node to gain ability to find defects that adversely affect process window.

  14. Grote Reber, Radio Astronomy Pioneer, Dies

    NASA Astrophysics Data System (ADS)

    2002-12-01

    Grote Reber, one of the earliest pioneers of radio astronomy, died in Tasmania on December 20, just two days shy of his 91st birthday. Reber was the first person to build a radio telescope dedicated to astronomy, opening up a whole new "window" on the Universe that eventually produced such landmark discoveries as quasars, pulsars and the remnant "afterglow" of the Big Bang. His self- financed experiments laid the foundation for today's advanced radio-astronomy facilities. Grote Reber Grote Reber NRAO/AUI photo "Radio astronomy has changed profoundly our understanding of the Universe and has earned the Nobel Prize for several major contributions. All radio astronomers who have followed him owe Grote Reber a deep debt for his pioneering work," said Dr. Fred Lo, director of the National Radio Astronomy Observatory (NRAO). "Reber was the first to systematically study the sky by observing something other than visible light. This gave astronomy a whole new view of the Universe. The continuing importance of new ways of looking at the Universe is emphasized by this year's Nobel Prizes in physics, which recognized scientists who pioneered X-ray and neutrino observations," Lo added. Reber was a radio engineer and avid amateur "ham" radio operator in Wheaton, Illinois, in the 1930s when he read about Karl Jansky's 1932 discovery of natural radio emissions coming from outer space. As an amateur operator, Reber had won awards and communicated with other amateurs around the world, and later wrote that he had concluded "there were no more worlds to conquer" in radio. Learning of Jansky's discovery gave Reber a whole new challenge that he attacked with vigor. Analyzing the problem as an engineer, Reber concluded that what he needed was a parabolic-dish antenna, something quite uncommon in the 1930s. In 1937, using his own funds, he constructed a 31.4-foot-diameter dish antenna in his back yard. The strange contraption attracted curious attention from his neighbors and became

  15. Claudius Ptolemäus: Der Sternkatalog des Almagest. Die arabisch-mittelalterliche Tradition. III. Gesamtkonkordanz der Sternkoordinaten.

    NASA Astrophysics Data System (ADS)

    Kunitzsch, P.

    P. Kunitzsch's Ptolemy project, which is concluded in Vol. III by a comprehensive concordance of the star coordinates, is to be understood primarily as a "philological" project. Apart from editing, for the first time, the texts of the surviving two Arabic versions and of Gerard of Cremona's Latin translation from the Arabic (see 42.003.021, 52.003.003), it provides in the concordance a survey of the star coordinates transmitted in all the significant texts and versions of Ptolemy's star catalogue.

  16. Cytologische Veränderungen während der Metamorphose des Cubopolypen Tripedalia cystophora (Cubozoa, Carybdeidae) in die Meduse

    NASA Astrophysics Data System (ADS)

    Laska-Mehnert, G.

    1985-06-01

    The life cycle of Tripedalia cystophora includes a sessile saclike polyp — the asexual reproducing form — and a pelagic tetraradial medusa — the sexually reproducing generation. Medusan development can be induced by temperature increase. It reveals neither budding nor strobilation, but a real metamorphosis of a polyp to only one medusa. According to morphological and anatomical criteria the metamorphosis can be subdivided into four different stages: (1) four longitudinal furrows segment the polyp, the tentacles of which are apportionated on the four quadrants of the body. (2) The subumbrellar cavity develops by invagination of the peristom; the relicts of the fused tentacles change to four rhopalia buds. (3) Medusan architecture including four new interradial tentacles, four rhopalia and the subumbrellar swimming musculature is completed. (4) A young tetraradial medusa starts swimming. Ultrastructural analysis of those metamorphic stages show the different processes of morphogenesis: (a) Gastrodermal cells — absorptive and spumous cells — undergo transdifferentiation and proliferation to medusan cells of the same structure and function. (b) Epidermal cells, excluding the epithel muscle cells, dissociate and are autolytically withdrawn. Dedifferentiated epithel muscle cells — interstitial cells — regain the ability to develop a complete new set of somatic cells, not originally present in the polyp. They include amongst others cross-striated muscle cells, medusan typic nematocyts and particularly sensory and nervous cells. Those cells establish a nervous system with lens-eyes, simple ocelli, statocysts, diffuse nerve net and an additional nerve ring.

  17. Die Behandlung des Wilden Westerns auf der Mittelstufe (Treatment of the Wild West in the Intermediate Grades).

    ERIC Educational Resources Information Center

    Omasreiter, Ria

    1979-01-01

    Presents a 2- to 3-hour teaching unit dealing with conflict between Whites and Indians, taking as an example the Black Hawk War. The reports of Chief Black Hawk and of historian Billington (sources for both are given) are taken as a basis for discussion. (IFS/WGA)

  18. Christoph Scheiner and the optics of the eye. (German Title: Christoph Scheiner und die Optik des Auges)

    NASA Astrophysics Data System (ADS)

    Daxecker, Franz

    Some of Scheiner's discoveries and experiments are taken from the books «Oculus», (Innsbruck 1619) and «Rosa Ursina sive Sol» (Rome 1626-1630): determination of the radius of curvature of the cornea, discovery of the nasal exit of the visual nerve, increase in the curvature of the lens in case of accommodation, anatomy of the eye, light reaction of the pupil, contraction of the pupil during accommodation, Scheiner's test (double images caused by ametropia), stenopeic effect, crossing rays in the eye, aperture, description of the cataract treatment, refractive indices of various parts of the eye, eye model, visual pivot angle of the eye, proof of crossing rays on the retina, comparison of the camera obscura and the optics of the eye.

  19. Entwicklung neuer Uebungsformen durch die Einbeziehung des Mediums Fernsehen (Development of New Types of Exercises through the Use of Television)

    ERIC Educational Resources Information Center

    Eggers, Dietrich

    1975-01-01

    Discusses the use of television in university-preparatory schools. The exercises are supplementary to "Deutsch 2000" (M. Hueber, Munich), and deal with land and culture. Three short films are presented, for use in free comment. Examples of grammar, vocabulary and dictation exercises are given. (Text is in German.) (IFS/WGA)

  20. Exciting Message from a Dying Monster Star

    NASA Astrophysics Data System (ADS)

    1996-03-01

    this is radiation from a SiO maser in the atmosphere of the star. If it would not have been a maser, it would have been far too weak to have been detected. Although we know several hundred masers of this type in the Milky Way, this is the first discovery of a SiO maser in another galaxy than our own . Since then, the observations have been continued in collaboration with Australian astronomers, using radio telescopes at Parkes and Mopra on that continent. A most unusual star When Swedish astronomer Bengt Westerlund and his colleagues first observed this LMC maser star in 1981 with optical telescopes, they thought that it was a rather normal, cool and not particularly bright star. However, a few years later, the Dutch-British-USA InfraRed Astronomical Satellite (IRAS) revealed its true nature. The IRAS measurements showed that the star radiates most of its light in the form of infrared radiation [4], making it one of the most powerful stars in the LMC; in fact, it emits about half a million times more energy than the Sun. On this occasion, it was given the designation IRAS 04553-6825 , the number indicating its position in the sky. IRAS 04553-6825 is unusual in other ways. It is some fifty times as heavy as our Sun, and it is the biggest known star in the LMC: if it were to take the place of our Sun, it would fill the solar system out to the planet Neptune, thirty times the distance from the Earth to the Sun. It is rather cool when compared to other stars - although it still has a temperature of about 2,000 C - and it therefore has a very red colour [5]. This Press Release is accompanied by ESO Press Photo 15/96 which demonstrates that while the star is hardly visible in blue light, it shines brightly in red and infrared light. Stars like IRAS 04553-6825 are known as red supergiants. It has been unofficially dubbed `The Monster', and having reached the end of a short and hectic life, it is now dying. The nuclear reactions deep inside are undergoing important changes at

  1. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  2. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  3. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  4. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  5. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  6. 33 CFR 117.439 - Des Allemands Bayou.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Des Allemands Bayou. 117.439... DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.439 Des Allemands Bayou. (a) The draw of the S631 bridge, mile 13.9 at Des Allemands, shall open on signal if at least four hours notice...

  7. Moribund ants leave their nests to die in social isolation.

    PubMed

    Heinze, Jürgen; Walter, Bartosz

    2010-02-01

    Animal societies provide perfect conditions for the spread of infections and are therefore expected to employ mechanisms that reduce the probability of transmitting pathogens to group members [1-4]. Death in nature rarely results from old age but commonly results from diseases. Leaving one's group to die in seclusion might be an efficient way of minimizing the risk of infecting kin. Anecdotal observations of moribund individuals deserting from their groups exist for several species, including humans (e.g., [5]), but have rarely been substantiated by quantitative analysis. Furthermore, to confirm that dying in solitude has evolved because of its altruistic benefits requires refuting the alternative explanation of pathogen manipulation of host behavior. Here we show that workers of the ant Temnothorax unifasciatus dying from fungal infection, uninfected workers whose life expectancy was reduced by exposure to 95% CO(2)[6, 7], and workers dying spontaneously in observation colonies exhibited the same suite of behavior of isolating themselves from their nestmates days or hours before death. Actively leaving the nest and breaking off all social interactions thus occurred regardless of whether individuals were infected or not. Social withdrawal might be a commonly overlooked altruistic trait serving the inclusive fitness interests of dying individuals in social animals. PMID:20116243

  8. Acceptance of dying: a discourse analysis of palliative care literature.

    PubMed

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die. PMID:22513246

  9. Innovative Die Material and Lubrication Strategies for Clean and Energy Conserving Forging Technologies

    SciTech Connect

    Rajiv Shivpuri; Sailesh Babu; Lin Yang; Yijun Zhu

    2007-01-08

    The objective of this project was to develop and implement innovative die material and surface coating strategies such as composite dies and lubricated coatings to increase die lives and to reduce environmental pollution. In this project approaches and software were developed for die life optimization and optimal design of lubrication systems for hot forging. In addition, LENS applied nickel-aluminide coatings were developed and validated in the industrial environment for significant improvements in die life.

  10. The GBT-SerDes ASIC prototype

    NASA Astrophysics Data System (ADS)

    Moreira, P.; Baron, S.; Bonacini, S.; Cobanoglu, O.; Faccio, F.; Feger, S.; Francisco, R.; Gui, P.; Li, J.; Marchioro, A.; Paillard, C.; Porret, D.; Wyllie, K.

    2010-11-01

    In the framework of the GigaBit Transceiver project (GBT), a prototype, the GBT-SerDes ASIC, was developed, fabricated and tested. To sustain high radiation doses while operating at 4.8Gb/s, the ASIC was fabricated in a commercial 130 nm CMOS technology employing radiation tolerant techniques and circuits. The transceiver serializes-deserializes the data, Reed-Solomon encodes and decodes the data and scrambles and descrambles the data for transmission over optical fibre links. This paper describes the GBT-SerDes architecture, and presents the test results.

  11. Hospice nurses' emotional challenges in their encounters with the dying.

    PubMed

    Ingebretsen, Lina Paola; Sagbakken, Mette

    2016-01-01

    The purpose of this study was to explore nurses' emotional challenges when caring for the dying in hospices. The study has a qualitative design, and knowledge was developed through a dialectical exchange between theory and data. Ten individual in-depth interviews were conducted with nurses recruited from two hospices in Denmark. Although all of the nurses said that they experienced emotional challenges or felt emotionally touched during their work, the study found a variety of opinions related to the extent to which their emotional reactions should be revealed in their role as a hospice professional. The participants described their emotional challenges as being simultaneously draining and enriching experiences leading to personal and professional growth and development. The study may contribute to increased awareness of emotional challenges for hospice nurses, which involve continuous reflection and balancing between meeting the dying as a human being and meeting the dying as a hospice professional. PMID:27258584

  12. Hospice nurses’ emotional challenges in their encounters with the dying

    PubMed Central

    Ingebretsen, Lina Paola; Sagbakken, Mette

    2016-01-01

    The purpose of this study was to explore nurses’ emotional challenges when caring for the dying in hospices. The study has a qualitative design, and knowledge was developed through a dialectical exchange between theory and data. Ten individual in-depth interviews were conducted with nurses recruited from two hospices in Denmark. Although all of the nurses said that they experienced emotional challenges or felt emotionally touched during their work, the study found a variety of opinions related to the extent to which their emotional reactions should be revealed in their role as a hospice professional. The participants described their emotional challenges as being simultaneously draining and enriching experiences leading to personal and professional growth and development. The study may contribute to increased awareness of emotional challenges for hospice nurses, which involve continuous reflection and balancing between meeting the dying as a human being and meeting the dying as a hospice professional. PMID:27258584

  13. Optimization of an Extrusion Die for Polymer Flow

    NASA Astrophysics Data System (ADS)

    Ridene, Y. Chahbani; Graebling, D.; Boujelbene, M.

    2011-01-01

    In this work, we used the CFD software PolyFlow to optimize the extrusion process of polystyrene flow. In this process, the flow of the molten polymer through the die can be viewed as a critical step for the material in terms of shear rate, self heating by viscous dissipation and temperature reached. The simulation is focused on the flow and heat transfer in the die to obtain a uniform velocity profile and a uniform temperature profile. The rheological behavior of polymer melt was described by the nonlinear Giesekus model. The dependence of the viscosity has also to be taken into account for a correct description of the flow. The design of the die has been validated by our numerical simulation.

  14. A study of the dying process in elderly hospitalized males.

    PubMed

    Mogielnicki, R P; Nelson, W A; Dulac, J

    1990-01-01

    The dying process was studied by questioning nurses and next of kin of 40 consecutive patients who died in an acute care Veterans Hospital. Information regarding problems commonly thought important in the dying process was elicited and attempts were made to relate this information to global assessments of quality of life during the preterminal week and quality of the moments surrounding death. Despite long-standing awareness of many of these problems, important pain, respiratory difficulty, mood problems, blunted alertness, stooling problems, urination problems, and oral intake problems each was present in at least 50% of patients. Multivariate analysis did not define a convincing relationship between these problems and global assessments of quality. Responses of nurses and next of kin were similar most of the time, but nurses systematically rated pain as less severe than next of kin and next of kin systematically demonstrated less awareness of urinary and stooling problems than nurses. PMID:2206934

  15. [Recommendations for the palliative care of dying neonates].

    PubMed

    Cignacco, E; Stoffel, L; Raio, L; Schneider, H; Nelle, M

    2004-08-01

    Neonates and infants have the highest mortality rate in the pediatric patient population, but there is a paucity of data about their palliative care. Most neonate deaths occur during the first week of life so it is mostly the staff of NICUS's and obstetrical wards who are confronted with the palliative care of dying neonates. Clinical experience shows that many aspects of care in palliative situations are not well known to the health care providers. This is especially true for pain assessment and pain treatment during the dying process. A search of the literature on this subject resulted in only a few publications; hence, this article basically describes clinical experience in the palliative care of neonates. In this article some recommendations for decision-making and standardization of palliative care for dying neonates are presented. PMID:15326558

  16. Is "healthy dying" a paradox? revisiting an early Kastenbaum challenge.

    PubMed

    Kellehear, Allan

    This article is a review of Robert Kastenbaum's 1979 essay entitled "Healthy dying: A paradoxical quest continues." It begins with a summary of the arguments and challenges in the original essay. This is followed by an evaluation of his original claims in the light of contemporary insights in modern public health history and empirical studies of near-death experiences and death bed visions. The recent development of health promotion in palliative care is described in relation to these developments and Kastenbaum's early question about the paradoxical quest for health while dying is again posed against this background. Given our modern understanding of "health" in current global health policy and debates, it is argued that "healthy dying" is no paradox. Instead, the pursuit of health at the end of life represents a realistic modern desire to compress morbidity, minimize unnecessary suffering, and enhance quality of life at this time. PMID:25351589

  17. Aspect Epidemiologique des Sequelles de Brulures a Marrakech, Maroc, a Travers Deux Observations

    PubMed Central

    Ettalbi, S.; Ibnouzahir, M.; Droussi, H.; Wahbi, S.; Bahaichar, N.; Boukind, E.H.

    2009-01-01

    Summary La brûlure est un accident qui reste toujours très fréquent au Maroc, ce qui fait d'elle un problème de la santé publique. Les brûlures, quand elles sont graves ou profondes, entraînent de façon quasi inéluctable des séquelles fonctionnelles et esthétiques. A travers deux observations de deux enfants présentant des séquelles de brûlures graves, ayant retenti péjorativement sur leurs scolarités, on a essayé de mettre en évidence quelques facteurs incriminés dans cette tragédie (feu, petites bouteilles de gaz et le manque d'infrastructure, du personnel médical et paramédical, du matériel ainsi que de la prévention) comme étant une grande cause dans la survenue de ces séquelles. Le but de notre travail est d'énumérer ces différents facteurs intriqués, ainsi que de proposer quelques solutions, tout en insistant sur la prévention. PMID:21991156

  18. Einblicke in die Dynamik von Quantensystemen: Elektrostatische Speicherringe

    NASA Astrophysics Data System (ADS)

    Welsch, Carsten P.

    2005-03-01

    Elektrostatische Speicherringe kombinieren die Vorteile elektrostatischer Fallen und klassischer magnetischer Speicherringe. Kompaktheit, gute Zugänglichkeit sämtlicher Elemente, hohe Flexibilität in der Wahl möglicher Experimente und die Eigenschaft, alle Teilchen unabhängig von ihrer Masse über einen weiten Geschwindigkeitsbereich zu speichern, bieten Zugang zu einem weiten experimentellen Spektrum. Insbesondere das Potenzial, das in neuartigen, energievariablen Maschinen in Kombination mit Elektronenkühlung, internen Targets und hochauflösenden Reaktionsmikroskopen steckt, verspricht hochinteressante Ergebnisse mit den unterschiedlichsten Teilchen - von exotischen Antiprotonen oder schweren radioaktiven Ionen bis hin zu einfachen und komplexen Molekülen oder Biosystemen.

  19. Reducing the Surface Degradation of Aluminum Extrusion Dies During Preheating

    NASA Astrophysics Data System (ADS)

    Stratton, Paul

    2010-07-01

    Aluminum extrusion dies are usually made from H13 steel that is ferritically nitrocarburized to minimize wear and pick-up. Before being placed in the extrusion press, the dies are preheated to minimize thermal shock at the start of the extrusion cycle. During the preheating time, the nitrocarburized layer oxidizes. Some of this layer can break away during extrusion leaving marks on the product. Although inerting the preheat furnaces with nitrogen has been found to reduce the oxidation, it does not solve the problem completely. Experiments have shown that a small addition of ammonia to the preheating protective atmosphere could eliminate oxidation and prevent nitrogen loss from the surface nitride layer.

  20. Futile care: confronting the high costs of dying.

    PubMed

    Coppa, S

    1996-12-01

    The costs of futile care for the dying are great. Futility can present challenges because of the monetary costs of such care, its negative effects on staff members, and the burden it creates in allocating limited resources. Administrators can work to recognize and form a better understanding of futility and thus develop strategies for decreasing non-beneficial care. The author discusses issues surrounding futile care and offers suggestions for administrators to decrease spending related to the administration of futile care for the dying. PMID:8968320

  1. Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

    NASA Astrophysics Data System (ADS)

    Sotomayor Cruz, Cristian Daniel

    Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des

  2. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    NASA Astrophysics Data System (ADS)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  3. Effets des electrons secondaires sur l'ADN

    NASA Astrophysics Data System (ADS)

    Boudaiffa, Badia

    Les interactions des electrons de basse energie (EBE) representent un element important en sciences des radiations, particulierement, les sequences se produisant immediatement apres l'interaction de la radiation ionisante avec le milieu biologique. Il est bien connu que lorsque ces radiations deposent leur energie dans la cellule, elles produisent un grand nombre d'electrons secondaires (4 x 104/MeV), qui sont crees le long de la trace avec des energies cinetiques initiales bien inferieures a 20 eV. Cependant, il n'y a jamais eu de mesures directes demontrant l'interaction de ces electrons de tres basse energie avec l'ADN, du principalement aux difficultes experimentales imposees par la complexite du milieu biologique. Dans notre laboratoire, les dernieres annees ont ete consacrees a l'etude des phenomenes fondamentaux induits par impact des EBE sur differentes molecules simples (e.g., N2, CO, O2, H2O, NO, C2H 4, C6H6, C2H12) et quelques molecules complexes dans leur phase solide. D'autres travaux effectues recemment sur des bases de l'ADN et des oligonucleotides ont montre que les EBE produisent des bris moleculaires sur les biomolecules. Ces travaux nous ont permis d'elaborer des techniques pour mettre en evidence et comprendre les interactions fondamentales des EBE avec des molecules d'interet biologique, afin d'atteindre notre objectif majeur d'etudier l'effet direct de ces particules sur la molecule d'ADN. Les techniques de sciences des surfaces developpees et utilisees dans les etudes precitees peuvent etre etendues et combinees avec des methodes classiques de biologie pour etudier les dommages de l'ADN induits par l'impact des EBE. Nos experiences ont montre l'efficacite des electrons de 3--20 eV a induire des coupures simple et double brins dans l'ADN. Pour des energies inferieures a 15 eV, ces coupures sont induites par la localisation temporaire d'un electron sur une unite moleculaire de l'ADN, ce qui engendre la formation d'un ion negatif transitoire

  4. The "Conservatoire National des Arts et Metiers"

    ERIC Educational Resources Information Center

    Kuhn, Gerard

    2004-01-01

    The overall mission of the Conservatoire national des arts et metiers--(CNAM) [National Conservatory of Industrial Arts and Trades] is outlined. One of its centers, the "Centre national de l'entrepreneuriat"--(CNE) [National Center for Entrepreneurship] is described in greater detail. In particular, this center offers various services, notably…

  5. Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

    NASA Astrophysics Data System (ADS)

    Fall, H.; Charon, W.; Kouta, R.

    2002-12-01

    Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

  6. Barriers to Quality Care for Dying Patients in Rural Communities

    ERIC Educational Resources Information Center

    Van Vorst, Rebecca F.; Crane, Lori A.; Barton, Phoebe Lindsey; Kutner, Jean S.; Kallail, K. James; Westfall, John M.

    2006-01-01

    Context: Barriers to providing optimal palliative care in rural communities are not well understood. Purpose: To identify health care personnel's perceptions of the care provided to dying patients in rural Kansas and Colorado and to identify barriers to providing optimal care. Methods: An anonymous self-administered survey was sent to health care…

  7. A Framework for Ethical Decision-Making with Dying Patients.

    ERIC Educational Resources Information Center

    Lafer, Barbara H.; Lee, Sandra S.

    The field of death and dying has become an important area for the development of both research and clinical technique. Psychologists in increasing numbers work in hospital and hospice settings, and therapists treat terminally ill patients and/or their families. Greater attention is being paid to the needs and rights of these patients and families,…

  8. Caregivers' insights on the dying trajectory in hematology oncology.

    PubMed

    McGrath, P

    2001-10-01

    It is increasingly acknowledged in the research literature that palliative care is not offered to patients with a hematologic malignancy. The evidence indicates that patients are not dying at home or in the comfort of the hospice setting but are more likely to end up in the high-tech care of an intensive care unit. The holistic, compassionate care of the hospice/palliative care philosophy is not routinely made available to either these patients or the families who care for them. However, little is known about what the end-of-life experience is for such patients and their families and how they are managing to negotiate their dying experience in a system that is designed to cure not to palliate. In particular, there is a dearth of information on what happens to the caregivers during what is characteristically a prolonged and difficult period of sustained caring within the high-tech system. This discussion presents findings from recent research that is beginning to document the experience of the dying trajectory for patients from these diagnostic groups and their families. The hope and expectation from such research is that the information will make a contribution to building multidisciplinary plans of care for hematologic malignancies during the dying trajectory, to ensure that patients and their families are appropriately referred to the palliative system or, at least, are given sensitive palliative care within the curative system. PMID:11605712

  9. Preventive Therapy with Siblings of a Dying Child.

    ERIC Educational Resources Information Center

    Feinberg, Daniel

    A case study of psychiatric intervention for two sisters whose brother is dying of leukemia is presented. The therapeutic technique attempted to deal with the threatened loss by a forthright approach to the reality situation, encouraging "immunizing" discussions, allowance for catharsis without severe regression, emphasis on reality orientation,…

  10. Attitudes of Dental and Medical Students toward Death and Dying.

    ERIC Educational Resources Information Center

    Sundin, Robert H.; And Others

    1979-01-01

    Explores attitudes of dental and medical students toward death and dying. Attitudes toward death influencing choice between dental school and medical school are latent. Attitudes of dental and medical students toward death may be differentially affected by their professional experiences. (Author/BEF)

  11. Spare Dying Patients Electric Shocks from Heart Device, Docs Say

    MedlinePlus

    ... FAQs Contact Us Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Latest Health News → Article URL of this page: https://www.nlm.nih.gov/medlineplus/news/fullstory_157958.html Spare Dying Patients Electric Shocks From Heart Device, Docs Say Many unaware ...

  12. View west of small tooling and forging dies in Blacksmith ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View west of small tooling and forging dies in Blacksmith Shop, Boilermakers Department, east side of building 57; during World War II approximately forty women were employed as blacksmith's forging a variety of small tools; these may be the tools they used. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  13. A Simulation Based on Goldratt's Matchstick/Die Game

    ERIC Educational Resources Information Center

    Martin, Clarence H.

    2007-01-01

    This teaching brief presents a Microsoft® Excel simulation designed to complement and expand upon the well-known matchstick/die game introduced by Goldratt in "The Goal." This simulation performs 100 replications of a 40-period processing run for low, medium, and high levels of process variation and displays the comparative results…

  14. Do People Whose Names Begin with "D" Really Die Young?

    ERIC Educational Resources Information Center

    Smith, Gary

    2012-01-01

    It has been reported that professional baseball players whose first names begin with the letter "D" tend to die relatively young (E. L. Abel & M. L. Kruger, 2010). However, the statistical evidence for this claim is based on selective data and a statistical test that ignores important confounding influences. A valid test applied to more…

  15. Accompaniment needs of nursing students related to the dying patient.

    PubMed

    Van Rooyen, D; Laing, R; Kotzé, W J

    2005-11-01

    Nurse educators are responsible for accompanying students towards becoming capable, competent professional nurses who are a credit to themselves, their patients, colleagues and profession. Student nurses need, therefore, to be taught to render comprehensive nursing care to patients in all stages of their lives, including when they are dying. Being confronted with human suffering and death is challenging and traumatic. Those exposed to such events on a daily basis need to have a solid foundation of self preservation to see past the pain of suffering and to bring light and hope to those in need. A young student nurse will only experience positive growth and development in these circumstances if she is also cared for and guided with understanding. The researcher utilized a qualitative, explorative, descriptive and contextual design based on the phenomenological approach to enquiry. The following question was asked at the beginning of each unstructured phenomenological interview: "How was if for you to care for a dying or deceased patient?" The central theme identified that student nurses experience turmoil in their different relationships in their accompaniment of the dying patient. Guidelines based on the central theme and sub-themes that emerged from raw data, as well as literature, are offered as strategies to promote/enhance optimal accompaniment of student nurses caring for the dying patient. PMID:16450557

  16. Learning from Clients: Counseling the Frail and Dying Elderly.

    ERIC Educational Resources Information Center

    Kemp, James T.

    1984-01-01

    Contends that experience with a frail or dying client is a learning opportunity for the counselor. Presents several examples illustrating the reactions of the elderly to approaching death and suggests that successful counselors accept their own mortality and acknowledge the decision of the failing elderly that death is near. (JAC)

  17. Understandings of Death and Dying for People of Chinese Origin

    ERIC Educational Resources Information Center

    Hsu, Chiung-Yin; O'Connor, Margaret; Lee, Susan

    2009-01-01

    This article introduces the primary beliefs about ancestor worship, Taoism, Confucianism, Buddhism and traditional Chinese medicine that have influenced Chinese people for thousands of years, particularly in relation to death and dying. These cultures and traditions remain important for Chinese people wherever they live. Over a long period,…

  18. A Membrane Process for Recycling Die Lube from Wastewater Solutions

    SciTech Connect

    Eric S. Peterson; Jessica Trudeau; Bill Cleary; Michael Hackett; William A. Greene

    2003-04-01

    An active-surface membrane technology was used to separate a die lube manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by 20–25X, carbon oxygen demand (COD) by 1.5 to 2X, and total organic carbon (TOC) by 0.6, while the biological oxygen demand (BOD) remained constant. The active-surface membranes were not fouled as badly as non-active-surface systems and the active-surface membrane flux levels were consistently higher and more stable than those of the non-active-surface membranes tested. Field testing demonstrated that the rotary microfilter can concentrate the die lube, i.e. remove the glycerin component, and produce a die lube suitable for recycling. The recycling system operated for six weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that the die casting scrap was reduced from 8.4 to 7.8%. There is no doubt that this test yielded tremendous results. This separation process presents significant opportunities that can be evaluated further.

  19. A Membrane Process for Recycling Die Lube from Wastewater Solutions

    SciTech Connect

    Peterson, E. S.; Trudeau, J.; Cleary, B.; Hackett, M.; Greene, W. A.

    2003-04-30

    An active-surface membrane technology was used to separate a die lube manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by 20-25X, carbon oxygen demand (COD) by 1.5 to 2X, and total organic carbon (TOC) by 0.6, while the biological oxygen demand (BOD) remained constant. The active-surface membranes were not fouled as badly as non-active-surface systems and the active-surface membrane flux levels were consistently higher and more stable than those of the non-active-surface membranes tested. Field testing demonstrated that the rotary microfilter can concentrate the die lube, i.e. remove the glycerin component, and produce a die lube suitable for recycling. The recycling system operated for six weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that the die casting scrap was reduced from 8.4 to 7.8%. There is no doubt that this test yielded tremendous results. This separation process presents significant opportunities that can be evaluated further.

  20. Dreams of the Dying Patient: An Exploration of Content.

    ERIC Educational Resources Information Center

    Prince, Pamela N.; Hoffmann, Robert F.

    1991-01-01

    Examined 25 dream reports of individuals in Palliative Care Unit. Content analysis of dream reports supports hypothesis that continuity exists between dreaming and waking experience. Results did not indicate that themes of death and aggression, negative emotion, or infant and child characters were more prevalent among the dying. (Author/NB)

  1. An indicator for fitting castings to a die.

    PubMed

    Troendle, G R; Troendle, K B

    1992-10-01

    This article describes a procedure for making an indicator to be used in fitting a casting to a die. It also describes how to use the indicator in the laboratory. The materials for making the indicator are inexpensive, present no health hazard, and are readily available at any arts and crafts store. PMID:1403953

  2. Learning To Say Goodbye: Dealing with Death and Dying.

    ERIC Educational Resources Information Center

    Peck, Rosalie; Stefanics, Charlotte

    This book is intended to help the counselor learn to work with terminal patients. The first part presents historical and cultural attitudes toward death and dying. Fear of death, the role of religion, and common myths about terminal cancer patients are discussed. The second part deals with care and treatment of terminal patients. The significance…

  3. Consumer Aspects of Death and Dying. The Forgotten Dimension.

    ERIC Educational Resources Information Center

    Eddy, James M.; And Others

    1980-01-01

    The consumer aspects of death and dying are discussed as part of a comprehensive death education program. Suggested areas to be covered include traditional funeral procedures and costs; alternatives including cremation, body donation, and funeral and memorial societies; and drawing up a will. Some suggested teaching strategies are outlined. (JMF)

  4. Where a Cancer Patient Dies: The Effect of Rural Residency

    ERIC Educational Resources Information Center

    Burge, Frederick I.; Lawson, Beverley; Johnston, Grace

    2005-01-01

    Context: Surveys indicate 50% to 80% of cancer patients would choose to die at home if possible, although far fewer actually do. In Nova Scotia (NS), cancer deaths occurring out-of-hospital increased from 19.8% in 1992 to 30.2% in 1997. The impact of rural residency on this trend has not been studied. Purpose: To determine the association between…

  5. Technological Change in Michigan's Tool and Die Industry.

    ERIC Educational Resources Information Center

    Smith, Donald N.

    This study was conducted to answer four questions about the tool and die industry in Michigan. These were: (1) What are the current production techniques? (2) To what extent are these industrialists aware of new technologies? (3) What technical and economic factors affect technological change? and (4) To what extent will new technologies replace…

  6. Exploring the Counselor's Role in "Right to Die" Decisions.

    ERIC Educational Resources Information Center

    Farrugia, David

    1993-01-01

    Explores issues related to "right to die." Makes case for counselors to assist clients and families with concerns related to refusal or withdrawal of medical treatment in cases of terminal illness or in cases where quality of life is severely impaired such as permanent comatose state. Presents historical, ethical, and legal perspectives. Discusses…

  7. Dying with Dementia in Long-Term Care

    ERIC Educational Resources Information Center

    Sloane, Philip D.; Zimmerman, Sheryl; Williams, Christianna S.; Hanson, Laura C.

    2008-01-01

    Purpose: To better understand the experiences and potential unmet need of persons who die in long-term care. Design and Methods: We conducted after-death interviews with staff who had cared for 422 decedents with dementia and 159 who were cognitively intact and received terminal care in U.S. nursing homes (NHs) or residential care-assisted living…

  8. Apport de l'orientation clinique dans le diagnostic des hypertensions arterielles endocriniennes

    PubMed Central

    El Aziz, Siham; Chadli, Asma; Louda, Fatima; El Ghomari, Hassan; Farouqi, Ahmed

    2014-01-01

    L'hypertension artérielle d'origine endocrinienne représente une cause curable d'hypertension artérielle (HTA), ce qui en justifie le dépistage. Une orientation clinique est souhaitable afin de prescrire les bilans adéquats, notamment dans les pays en voie de développement. L'objectif de notre étude est décrire les aspects cliniques des patients ayant une HTA endocrinienne diagnostiquée au CHU de Casablanca. Méthodes: Il s'agit d'une étude descriptive rétrospective de 2004 à 2011, incluant tout patient ayant une HTA endocrinienne (en dehors des dysthyroïdies) admis en Endocrinologie. Les données concernant les facteurs cliniques, paracliniques et thérapeutiques ont été colligées. Au cours de la période étudiée, 53 cas d'HTA endocrinienne ont été admis, avec une age moyen au diagnostic de 39,3 ans et un sex-ratio F/H de 3,9. Trente patients (56.6%) ont un age ont un âge inférieur à 40 ans. On ne retrouve pas d'hérédité tensionelle chez 88.7% des patients. Les étiologies sont le Syndrome de cushing (41.5%), le phéochromocytome (32%), les adénomes somatotropes (15%) et les hyperaldostéronismes primaire (7.5%). L'HTA est essentiellement de grade un ou deux (69.8%), avec un retentissement cardio-vasculaire chez 11 patients (20.7%). Les patients ayant un SC avaient tous des signes cutanés spécifiques. Il s'agissait de sujets jeunes avec plusieurs facteurs de risque cardiovasculaire. Nous avons retrouvé un amaigrissement chez 37.5% des patients ayant un phéochromocytome avec un indice de masse corporel moyen de 20 kg/m2. L'HTA était permanente dans 5 cas de phéochromocytomes. Il n'existait pas d'hypokaliémie chez 50% des patients ayant un hyperaldostéronisme. Les signes cliniques des patients ayant une acromégalie étaient francs, avec un age moyen plus élevé de 50 ans. Nous avons noté une régression de l'HTA chez 59% de ces patients après guérison de l'endocrinopathie en cause. Plusieurs signes cliniques peuvent nous

  9. Simple visualization techniques for die casting part and die design. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.A.; Lu, S.C.; Rebello, A.B.

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects of problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  10. Simple visualization techniques for die casting part and die design. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.A.; Lu, S.C.; Rebello, A.B.

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects of problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information form the voxel model for display to the user.

  11. To Die, To Sleep: A Contrastive Study of Metaphors for Death and Dying in English and Spanish.

    ERIC Educational Resources Information Center

    Marin-Arrese, Juana I.

    1996-01-01

    Contrasts the use of metaphors for death and dying in English and Spanish and makes some observations concerning universal and culture-specific conceptualizations. The article points out that the human capacity to conceptualize and reason derives from experience (perceptions, cultural practices, motor activity) and imagination (metaphor, metonymy,…

  12. Profil epidemiologique des brulures d'enfants admis au Centre National des Brules, Maroc

    PubMed Central

    Zahid, A.; Atannaz, J.; Alaoui, M.; Rafik, A.; Ezzoubi, M.; Diouri, M.; Chlihi, A.; Bahechar, N.; Boukind, E.H.

    2011-01-01

    Summary Ce travail rétrospectif analyse les particularités épidémiologiques de 543 cas de brûlures d'enfants, représentant 45,7% des admissions de notre centre, en vue de déterminer les éléments pouvant contribuer à renforcer la prévention, qui reste le traitement de choix de cette pathologie. La moyenne d'âge est de 4,25 ans avec une prédilection pour la tranche d'âge d'un à cinq ans, avec 42,5% des cas. Une atteinte masculine est retrouvée dans 63,5% des cas. La brûlure survient à domicile dans 85,1% et accidentellement dans 95% des cas. Les brûlures thermiques représentent 96,5% des causes dominées par les liquides dans 69,3% des cas. La surface cutanée brûlée est ≥ 20% dans 52,3%. La brûlure intéresse essentiellement les membres supérieurs (79,1%). 56,8% des enfants sont transférés par d'autres hôpitaux et le délai de prise en charge hospitalière est supérieur à 6 heures dans 65,5%. Le taux de mortalité a été de 13,2%. PMID:22639559

  13. Research on the Effects of the Movable Die and its Counter Force on Sheet Hydroforming

    SciTech Connect

    Zhou, Li X.; Zhang, Shi H.; Wang, Ben X.

    2007-05-17

    An improved Sheet Hydro-forming process was proposed, which was investigated in Institute of Metal Research, Chinese Academy of Sciences. ASAME system and FEM are used to analyze the forming process to explain some results that were found in the experiment. In the simulation, the effect of the movable die on the maximum principal stress is investigated in detail by using the FEM code LS-DYNA. For this case, the movable die changes the distribution of the maximum principal stress. For the sheet hydroforming without the movable die, the principal stress near the shoulder of the movable die arrives to the maximum value when t=0.0033s suddenly. But for the sheet hydroforming with the movable die, the maximum principal stress still lies in the die radius. The principal stress near the shoulder of the movable die is smaller. At the last stage contacting with the die, for the case without the movable die, the maximum principal stress near the shoulder of movable die is larger than that of the sheet hydroforming with the movable die. Moreover, the stress distribution near the shoulder of movable die for the case without the movable die is complicated. It is instable and very easy to occur wrinkling. The movable die delays the maximum thickness strain to the contacting die stage. So the formability of sheet metal can be remarkably improved by adopting the movable die. On a certain extent, the uniform distribution of thickness can be realized by increasing the counterforce of movable die. The minimum thickness reduction moves outside which is very helpful for the uniform thickness distribution. In this paper, two kinds of materials, soft steel and stainless steel, were investigated.

  14. Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

    NASA Astrophysics Data System (ADS)

    Veres, Teodor

    Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques

  15. Bereits nach Ablauf der Halbwertszeit droht der vollständige Zerfall Die britische Atomic Scientists’ Association, die Ideologie der „objektiven” Wissenschaft und die H-Bombe

    NASA Astrophysics Data System (ADS)

    Laucht, Christoph

    Präsident Harry Trumans Verlautbarung vom 31.1.1950, seine Regierung wolle die Entwicklung der Wasserstoffbombe vorantreiben, fand große Beachtung in den britischen Medien. Die illustrierte Zeitschrift Picture Post widmete der HBombe einen Artikel, der unter anderem kurze Stellungnahmen der britischen Atomwissenschaftler Eric Burhop, Kathleen Lonsdale, Harrie Massey, Rudolf Peierls und Maurice Pryce enthielt, die alle Mitglieder der Atomic Scientists' Association (ASA) waren.

  16. Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

    NASA Astrophysics Data System (ADS)

    Leger, Michel T.

    Les activites humaines energivores telles l'utilisation intensive de l'automobile, la surconsommation de biens et l'usage excessif d'electricite contribuent aux changements climatiques et autres problemes environnementaux. Bien que plusieurs recherches rapportent que l'etre humain est de plus en plus conscient de ses impacts sur le climat de la planete, ces memes recherches indiquent qu'en general, les gens continuent a se comporter de facon non ecologique. Que ce soit a l'ecole ou dans la communaute, plusieurs chercheurs en education relative a l'environnement estiment qu'une personne bien intentionnee est capable d'adopter des comportements plus respectueux de l'environnement. Le but de cette these etait de comprendre le processus d'integration de comportements d'attenuation des changements climatiques dans des familles. A cette fin, nous nous sommes fixe deux objectifs : 1) decrire les competences et les procedes qui favorisent l'adoption de comportements d'attenuation des changements climatiques dans des familles et 2) decrire les facteurs et les dynamiques familiales qui facilitent et limitent l'adoption de comportements d'attenuation des changements climatiques dans des familles. Des familles ont ete invitees a essayer des comportements personnels et collectifs d'attenuation des changements climatiques de sorte a integrer des modes de vie plus ecologiques. Sur une periode de huit mois, nous avons suivi leur experience de changement afin de mieux comprendre comment se produit le processus de changement dans des familles qui decident volontairement d'adopter des comportements d'attenuation des changements climatiques. Apres leur avoir fourni quelques connaissances de base sur les changements climatiques, nous avons observe le vecu de changement des familles durant huit mois d'essais a l'aide de journaux reflexifs, d'entretiens d'explicitation et du journal du chercheur. La these comporte trois articles scientifiques. Dans le premier article, nous presentons une

  17. Community Environmental Response Facilitation Act (CERFA) report. Fort Des Moines, Des Moines, Iowa. Final report

    SciTech Connect

    Young, B.; Rausch, K.; Kang, J.

    1994-04-01

    This report presents the results of the Community Environmental Response Facilitation Act (CERFA) investigation conducted by The Earth Technology Corporation (TETC) at the Fort Des Moines, a U.S. Government property selected for closure by the Base Realignment and Closure (BRAC) Commission. Under CERFA Federal agencies are required to identify real property that can be immediately reused and redeveloped. Satisfying this objective requires the identification of real property where no hazardous substances or petroleum products, regulated by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), were stored for one year or more, known to have been released, or disposed. Fort Des Moines is a 53.28-acre site located in Polk County, Iowa, within the city limits of Des Moines. The installation's primary mission is to provide support and shelter for the U.S. Army Reserve. Activities associated with the property that have environmental significance are photographic processing, vehicle maintenance, printing, and fuel storage. TETC reviewed existing investigation documents; U.S. Environmental Protection Agency (USEPA), State, and county regulatory records; environmental data bases; and title documents pertaining to Fort Des Moines during this investigation. In addition, TETC conducted interviews and visual inspections of Fort Des Moines as well as visual inspections and data base searches for the surrounding properties. Information in this CERFA Report was current as of April 1994.

  18. Etude des phenomenes de penetration des especes chimiques dans les revetements cathodiques des cuves d'electrolyse de l'aluminium

    NASA Astrophysics Data System (ADS)

    Brisson, Pierre-Yves

    Cette these decrit l'etude effectuee sur les phenomenes d'insertion du sodium et de penetration du bain electrolytique dans les revetements cathodiques des cuves d'electrolyse de l'aluminium. L'etude fut effectuee a l'aide d'un montage permettant d'effectuer l'electrolyse en laboratoire. Trois types de revetement cathodiques furent etudies : des blocs semi-graphitique, des blocs graphitiques et des blocs graphitises. L'insertion du sodium dans les trois differents types de blocs fut etudiee a l'aide de la spectrometrie des photoelectrons X (XPS). L'analyse a permis de mettre en evidence deux formes de sodium dans l'anthracite et la phase liante des materiaux semi-graphitiques et graphitiques, indiquant qu'une fraction du sodium se retrouve sous forme adsorbee dans les micropores des materiaux alors que l'autre fraction est inseree dans la structure cristalline du carbone. Dans les phases graphitiques (materiaux graphitises et graphitiques), seuls les micropores sont occupes par le sodium Ce resultat explique la tendance observee selon laquelle l'ajout de graphite dans les blocs permet d'abaisser le gonflement sodique. Les mecanismes de penetration du bain dans le reseau poreux des materiaux furent etudies en microscopie electronique et en diffraction des rayons X sur des echantillons apres differents temps d'electrolyses et en variant l'atmosphere (soit sous argon ou sous azote). Ces analyses ont permis d'identifier le mecanisme conduisant a la mouillabilite du bain sur le carbone en fonction de l'atmosphere entourant l'electrolyse. Ainsi, sous azote, la formation de NaCN dans les pores des materiaux par reactions entre le sodium et l'azote permet une mouillabilite accrue du bain alors qu'en absence d'azote (sous argon), le carbure d'aluminium, formes a la surface des pores, joue un role similaire. Dans ce dernier cas, la penetration du bain est moins rapide etant donnee la necessite de toujours amener des especes contenant de l'aluminium en tete du front de

  19. TRANSPLANTATION EN MASSE DES ORGANES ABDOMINAUX

    PubMed Central

    STARZL, T.

    2010-01-01

    Les transplantations multi-organes, comprenant les blocs foie-duodénum-pancréas, foie-estomac-duodénum-pancréas, et foie-intestin sont réalisées avec un succés croissant Ces techniques et leurs combinaisons variées de transplantation monobloc ne sont pas de pratique courante. Les techniques de prélévement, de conservation et de soins post-opératoires sont décrites pour la transplantation multi-organes compléte ainsi que pour les variantes incomplétes. Le probléme particulier à ce type de transplantation est celui de la transplantation intestinale, c’est-à-dire la transplantation d’un organe à composante lymphoréticulaire complexe ce qui peut provoquer un syndrome greffon contre hôte. Par erreur de conception, et un peu par esprit de systéme, les efforts par le passé étaient dirigés sur la modification et la destruction des systémes lymphoréticulaires grâce au traitement préalable du donneur ou des organes transplantés, par médicaments, radiation ou autres moyens. Actuellement, I’idée directrice est de garder intacte les systémes lymphoréticulaires qui deviennent alors le site d’une circulation à double sens aprés transplantation. Avec la puissante immunodépression que fournit le FK 506, les cellules lymphoréticulaires du donneur peuvent circuler chez le receveur sans créer de syndrome du greffon contre hôte clinique et les cellules de la greffe s’assimilent à celles du receveur (chimérisme local) sans provoquer de rejet. Même si I’on évite le rejet ou le syndrome greffon contre hôte, il existe, à côté de ces entités, des relations métaboliques entre les organes greffés ainsi qu’entre les organes greffés et les viscéres du receveur laissés en place, qui peuvent influencer I’avenir soit des organes greffés, soit des organes laissés en place. Parmi les échanges métaboliques les mieux connus actuellement, il y a les facteurs splanchniques hépatotrophes endogénes, dont I’insuline est la mieux

  20. Modeling of Closed-Die Forging for Estimating Forging Load

    NASA Astrophysics Data System (ADS)

    Sheth, Debashish; Das, Santanu; Chatterjee, Avik; Bhattacharya, Anirban

    2016-05-01

    Closed die forging is one common metal forming process used for making a range of products. Enough load is to exert on the billet for deforming the material. This forging load is dependent on work material property and frictional characteristics of the work material with the punch and die. Several researchers worked on estimation of forging load for specific products under different process variables. Experimental data on deformation resistance and friction were used to calculate the load. In this work, theoretical estimation of forging load is made to compare this value with that obtained through LS-DYNA model facilitating the finite element analysis. Theoretical work uses slab method to assess forging load for an axi-symmetric upsetting job made of lead. Theoretical forging load estimate shows slightly higher value than the experimental one; however, simulation shows quite close matching with experimental forging load, indicating possibility of wide use of this simulation software.

  1. The Assisted Dying Bill and the role of the physician.

    PubMed

    Mullock, Alexandra

    2015-08-01

    This article explores the role of the physician in the Assisted Dying Bill, which is currently progressing through the House of Lords. The Supreme Court decision in Nicklinson and Others has alerted Parliament to the possibility that the current prohibition against assisted suicide may breach Article 8 of the European Convention in relation to the right to choose how to end one's life. In this article, the role of healthcare professionals in the proposed legalisation of physician-assisted suicide is examined, together with consideration of key ethical concerns over who might be permitted to access assisted dying. Whether the proposed law presents an ethically sound alternative to the current prohibition against assisting in suicide is not clear, but Parliament must now respond in order to address human rights issues and the call to legalise medically assisted suicide. PMID:25575506

  2. [Needs of caregivers and needs of the dying regarding food].

    PubMed

    Buser, C S

    1993-09-21

    The need for food in dying patients varies from one individual to the next. This requires the nursing staff to establish a precise history of the eating and drinking habits of these patients and their families. The necessary care is based on this history, on the professional knowledge of the nursing personnel, and on the ethical guidelines of the Swiss Association of Nursing Personnel, published in 1990. Care and nutrition programs must be reevaluated daily and adapted to the changing situation of the patient. The paper presents six major strategies drawn up by Brown and Chekryn in 1987 in order to assist nursing staff in coping with dehydration problems. Five (non-representative) interviews with experienced nurses throw light on the importance of giving special consideration to the nutritional needs of dying patients. PMID:8210865

  3. Development and evaluation of die and container materials

    NASA Technical Reports Server (NTRS)

    Wills, R. R.; Niesz, D. E.

    1979-01-01

    X = 0.75 Beta prime Sialon (a silicon aluminum oxynitride) and Sibeon (silicon beryllium oxynitride) are promising die materials. In sessile drop tests in contact with molten silicon, beryllium contamination was less than ppm and aluminum contamination 50 ppm. A shaping die of the Sialon material was successfully fabricated. Dry milling studies for the preparation of Si3N4-Al2O3-ALN mixtures were performed with butanol, acetic anhydride, oleic acid, and triethanolamine milling aids. Optimum mixing was achieved with 0.15 percent triethanolamine using a milling time of 8 hours. Preliminary evaluation of Sibeon materials indicates that they are more resistent to molten silicon attack than Sialon. Silicon contamination from the beryllium was less than aluminum contamination even though the aluminum impurity level in the Sibeon was only 450 to 1300 ppm. Work designed to produce an aluminum-free Sibeon is described.

  4. Relative Lifetime Prediction for CPV Die-Attach Layers: Preprint

    SciTech Connect

    Silverman, T. J.; Bosco, N.; Kurtz, S.

    2012-03-01

    In concentrating photovoltaics (CPV) cell assemblies, a large-area die-attach layer is subjected to thermal cycles, leading to thermomechanical fatigue. This causes cracking and the eventual failure of the CPV cell by thermal runaway. We define a damage metric representing lumped progress toward failure and present a numerical model for computing the accumulation of damage for arbitrary transient temperature conditions. The model is applied to a particular design with a solder die-attach layer. We show that accelerated-test thermal cycles with higher ramp rates cause more damage, both per cycle and per unit time. Outdoor exposure to one entire year in two geographic locations is also simulated, revealing that a year of exposure in Golden, Colorado is equivalent to 1.4 years of exposure in Oak Ridge, Tennessee.

  5. Experimental predator removal causes rapid salt marsh die-off

    PubMed Central

    Bertness, Mark D; Brisson, Caitlin P; Coverdale, Tyler C; Bevil, Matt C; Crotty, Sinead M; Suglia, Elena R

    2014-01-01

    Salt marsh habitat loss to vegetation die-offs has accelerated throughout the western Atlantic in the last four decades. Recent studies have suggested that eutrophication, pollution and/or disease may contribute to the loss of marsh habitat. In light of recent evidence that predators are important determinants of marsh health in New England, we performed a total predator exclusion experiment. Here, we provide the first experimental evidence that predator depletion can cause salt marsh die-off by releasing the herbivorous crab Sesarma reticulatum from predator control. Excluding predators from a marsh ecosystem for a single growing season resulted in a >100% increase in herbivory and a >150% increase in unvegetated bare space compared to plots with predators. Our results confirm that marshes in this region face multiple, potentially synergistic threats. PMID:24766277

  6. Milling strategies evaluation when simulating the forming dies' functional surfaces production

    NASA Astrophysics Data System (ADS)

    Ižol, Peter; Tomáš, Miroslav; Beňo, Jozef

    2016-05-01

    The paper deals with selection and evaluation of milling strategies, available in CAM systems and applicable when complicated shape parts are produced, such as forming dies. A method to obtain samples is proposed and this stems from real forming die surface machined by proper strategies. The strategy applicability for the whole part - forming die - is reviewed by the particular specimen evaluation. The presented methodology has been verified by machining model die and comparing it to the production procedure proposed in other CAM systems.

  7. A Magellanic origin of the DES dwarfs

    NASA Astrophysics Data System (ADS)

    Jethwa, P.; Erkal, D.; Belokurov, V.

    2016-09-01

    We establish the connection between the Magellanic Clouds (MCs) and the dwarf galaxy candidates discovered in the Dark Energy Survey (DES) by building a dynamical model of the MC satellite populations, based on an extensive suite of tailor-made numerical simulations. Our model takes into account the response of the Galaxy to the MCs infall, the dynamical friction experienced by the MCs and the disruption of the MC satellites by their hosts. The simulation suite samples over the uncertainties in the MC's proper motions, the masses of the MW and the Clouds themselves, and allows for flexibility in the intrinsic volume density distribution of the MC satellites. As a result, we can accurately reproduce the DES satellites' observed positions and kinematics. Assuming that Milky Way (MW) dwarfs follow the distribution of sub-haloes in Λ cold dark matter, we further demonstrate that, of 14 observed satellites, the MW halo contributes fewer than 4(8) of these with 68(95) per cent confidence and that 7(12) DES dwarfs have probabilities greater than 0.7(0.5) of belonging to the Large Magellanic Cloud (LMC). Marginalizing over the entire suite, we constrain the number of Magellanic satellites in the range -7 < MV < -1 which exceed the DES surface brightness threshold at ˜70, and the mass of the LMC around 1011 M⊙. The data also strongly support a first-infall scenario for the LMC. Finally, we give predictions for the line-of-sight velocities and the proper motions of the satellites discovered in the vicinity of the LMC.

  8. Early Results from the DES SN Survey

    NASA Astrophysics Data System (ADS)

    Scolnic, Daniel; Dark Energy Survey

    2016-01-01

    The Dark Energy Survey Supernova program (DES SN) has already discovered over 1000 Type Ia supernovae with well-sampled multi-color light curves in the redshift range 0.1 < z < 1.2. I will present an overview of the survey and show recent advances in our detection, photometry, calibration and spectroscopic follow-up pipelines. I will go over initial results from photometric classification of our sample and discuss methods used to reach measurements of cosmological parameters.

  9. A Magellanic Origin of the DES Dwarfs

    NASA Astrophysics Data System (ADS)

    Jethwa, P.; Erkal, D.; Belokurov, V.

    2016-06-01

    We establish the connection between the Magellanic Clouds (MCs) and the dwarf galaxy candidates discovered in the Dark Energy Survey (DES) by building a dynamical model of the MC satellite populations, based on an extensive suite of tailor-made numerical simulations. Our model takes into account the response of the Galaxy to the MCs infall, the dynamical friction experienced by the MCs and the disruption of the MC satellites by their hosts. The simulation suite samples over the uncertainties in the MC's proper motions, the masses of the MW and the Clouds themselves and allows for flexibility in the intrinsic volume density distribution of the MC satellites. As a result, we can accurately reproduce the DES satellites' observed positions and kinematics. Assuming that Milky Way (MW) dwarfs follow the distribution of subhaloes in ΛCDM, we further demonstrate that, of 14 observed satellites, the MW halo contributes fewer than 4(8) of these with 68(95)% confidence and that 7(12) DES dwarfs have probabilities greater than 0.7(0.5) of belonging to the LMC. Marginalising over the entire suite, we constrain the number of Magellanic satellites in the range -7 < MV < -1 which exceed the DES surface brightness threshold at ˜70, and the mass of the LMC around 1011M⊙. The data also strongly support a first-infall scenario for the LMC. Finally, we give predictions for the line-of-sight velocities and the proper motions of the satellites discovered in the vicinity of the LMC.

  10. Spray forming process for producing molds, dies and related tooling

    DOEpatents

    McHugh, Kevin M.; Key, James F.

    1998-01-01

    A method for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers.

  11. Years after Inventors Die, Royalties Are Pennies from Heaven

    ERIC Educational Resources Information Center

    Blumenstyk, Goldie

    2009-01-01

    Sarah L. Kieweg had her own nice surprise when the University of Central Florida contacted her. She understood quite a bit about her father's pioneering work on artificial intelligence in the 1990s. Still, in 2006, eight years after he died of a heart attack, at age 50, the call from the university came out of the blue: some of James R. Driscoll's…

  12. Deburring die-castings by wet vibratory plant

    NASA Astrophysics Data System (ADS)

    Loeschbart, H. M.

    1980-02-01

    A wet vibratory procedure for the removal of burrs from die castings is described. In this process synthetic abrasive chips and detergent solutions are agitated with the work in such a way as to produce a spiral circulatory movement. Details of various forms of vibrator basin and shapes of abrasive are illustrated. The automation of deburring is illustrated through the application of vibrators of spiral design in combination with transport and drying devices.

  13. Deburring die-castings by wet vibratory plant

    NASA Technical Reports Server (NTRS)

    Loeschbart, H. M.

    1980-01-01

    A wet vibratory procedure for the removal of burrs from die castings is described. In this process synthetic abrasive chips and detergent solutions are agitated with the work in such a way as to produce a spiral circulatory movement. Details of various forms of vibrator basin and shapes of abrasive are illustrated. The automation of deburring is illustrated through the application of vibrators of spiral design in combination with transport and drying devices.

  14. Vom Urknall zum Zerfall. Die Welt zwischen Anfang und Ende.

    NASA Astrophysics Data System (ADS)

    Fritzsch, H.

    Contents: Der Tanz mit dem Ozean. Galaktische Landkarte. Das Maß der Dinge. Der würfelnde Gott der Quantenphysik. Geheimnisvolle Felder. Materie und Antimaterie. Quarks - Urstoff unserer Welt. Zerfallende Protonen und die Einheit der Physik. Der Zauberofen. Das überschaubare Universum. Das explodierende Universum. Nachhall der Schöpfung. Der achtfache Weg der kosmischen Entwicklung. Das Ende der Welt. Einheit in der Vielfalt. Das geistige Universum. Gott und das absurde Universum.

  15. Should the patient be allowed to die? 1

    PubMed Central

    Nicholson, Richard

    1975-01-01

    In considering the patient's right to a certain quality of dying, this essay outlines how the legal and ethical justifications for passive euthanasia depend on the doctrine of acts and omissions. It is suggested that this doctrine is untenable and that alternative justifications are needed. The development of the modern mechanistic approach to death is traced, showing that a possible basis for an humane way of death lies in a reacceptance of a metaphysical concept of life. PMID:1100831

  16. Profil anthropometrique des enfants scolarises tananariviens

    PubMed Central

    Razafimanantsoa, Fetralinjiva; Razafindramaro, Notahiana; Raherimandimby, Hasina; Robinson, Annick; RakotoAlson, Olivat; Rasamindrakotroka, Andry

    2013-01-01

    Les enfants tananariviens sont en état de malnutrition chronique. Notre objectif est d’évaluer l'indice de masse corporelle (IMC) pour estimer les enfants apparemment "sains". Une enquête et une mesure de la taille et du poids des enfants scolarisés tananariviens de 6 à 11 ans ont été réalisées. Après leur accord, la taille et l'indice de masse corporelle des 442 enfants tirés au hasard ont été ainsi obtenus. L'analyse de la moyenne de la taille a révélé une différence significative à 8 ans, une différence non évidente sur l'indice de masse corporelle. La comparaison avec les valeurs de référence (OMS 2006) a montré un retard statural de 34% avec une tendance globale à la hausse et un déficit pondéral égal à 5,5% selon le z score. Ainsi, au sein d'une population malnutrie, l'indice de masse corporelle pourrait être utilisé comme un des paramètres à considérer dans l’évaluation de l’état de santé pour classer ces enfants en bonne santé apparente. PMID:24711862

  17. Dermatomyosite et panniculite: place des immunoglobulines

    PubMed Central

    Abdelhafidh, Nadia Ben; Toujeni, Sana; Kefi, Asma; Bousetta, Najeh; Sayhi, Sameh; Gharsallah, Imen; Othmani, Salah

    2016-01-01

    La panniculite est une maladie inflammatoire du tissu adipeux sous-cutané rarement associée à la dermatomyosite. Elle peut survenir avant, après ou en même temps que l'atteinte musculaire. Dans la plupart des cas, l’évolution de la panniculite et des autres atteintes de la dermatomyosite est favorable sous traitement corticoïde et/ou immunosuppresseur. Nous rapportons le cas d'une patiente âgée de 48 ans ayant présenté des lésions de panniculite précédant de 2 mois les signes musculaires. L'atteinte cutanée était résistante au traitement corticoïde associés aux immunosuppresseurs ce qui a nécessité le recours au traitement par Immunoglobulines polyvalentes permettant ainsi une amélioration à la fois de l'atteinte cutanée et musculaire.

  18. Choice of DES: is there a difference?

    PubMed Central

    Kaul, U; Bhatia, V

    2009-01-01

    Restenosis after percutaneous coronary interventions has been a major limitation of this otherwise very well-accepted method of coronary revascularisation. Coronary stents work by scaffolding the intimal flaps and preventing elastic recoil, which was a major problem after balloon angioplasty. The neointimal growth response to stenting contributes significantly to the restenotic process. Randomised studies comparing coronary artery bypass surgery with coronary stenting especially in multivessel disease clearly highlighted this problem. The problem has been greater in magnitude in special subgroups: diabetics, patients with small vessels (≤2.5 mm in diameter), long segments of disease (≥20 mm in length), etc. These limitations of Bare metal stents have been addressed by drug-eluting stents (DESs). Third-generation stents with bioabsorbable polymers like the Biolimus releasing Biomatrix stent have already become available in Europe and parts of Asia. A longer follow-up will prove their long-term safety vis-à-vis first-generation DES. The polymer-free stent with capability of using more than one drug, though very attractive, needs larger multicentric studies before gaining wider acceptance. The fully bioabsorbable stent is yet another promising concept. The feasibility has already been demonstrated, and finer refinements are under way. The future of newer DES thus is very promising, and most of the issues related to first-generation DES are at the threshold of being solved.

  19. HVM die yield improvement as a function of DRSEM ADC

    NASA Astrophysics Data System (ADS)

    Maheshwary, Sonu; Haas, Terry; McGarvey, Steve

    2010-03-01

    Given the current manufacturing technology roadmap and the competitiveness of the global semiconductor manufacturing environment in conjunction with the semiconductor manufacturing market dynamics, the market place continues to demand a reduced die manufacturing cost. This continuous pressure on lowering die cost in turn drives an aggressive yield learning curve, a key component of which is defect reduction of manufacturing induced anomalies. In order to meet and even exceed line and die yield targets there is a need to revamp defect classification strategies and place a greater emphasize on increasing the accuracy and purity of the Defect Review Scanning Electron Microscope (DRSEM) Automated Defect Classification (ADC) results while placing less emphasis on the ADC results of patterned/un-patterned wafer inspection systems. The increased emphasis on DRSEM ADC results allows for a high degree of automation and consistency in the classification data and eliminates variance induced by the manufacturing staff. This paper examines the use of SEM based Auto Defect Classification in a high volume manufacturing environment as a key driver in the reduction of defect limited yields.

  20. Results from prototype die-to-database reticle inspection system

    NASA Astrophysics Data System (ADS)

    Mu, Bo; Dayal, Aditya; Broadbent, Bill; Lim, Phillip; Goonesekera, Arosha; Chen, Chunlin; Yeung, Kevin; Pinto, Becky

    2009-03-01

    A prototype die-to-database high-resolution reticle defect inspection system has been developed for 32nm and below logic reticles, and 4X Half Pitch (HP) production and 3X HP development memory reticles. These nodes will use predominantly 193nm immersion lithography (with some layers double patterned), although EUV may also be used. Many different reticle types may be used for these generations including: binary (COG, EAPSM), simple tritone, complex tritone, high transmission, dark field alternating (APSM), mask enhancer, CPL, and EUV. Finally, aggressive model based OPC is typically used, which includes many small structures such as jogs, serifs, and SRAF (sub-resolution assist features), accompanied by very small gaps between adjacent structures. The architecture and performance of the prototype inspection system is described. This system is designed to inspect the aforementioned reticle types in die-todatabase mode. Die-to-database inspection results are shown on standard programmed defect test reticles, as well as advanced 32nm logic, and 4X HP and 3X HP memory reticles from industry sources. Direct comparisons with currentgeneration inspection systems show measurable sensitivity improvement and a reduction in false detections.

  1. Sécurité au-delà des mythes et des croyances

    ScienceCinema

    None

    2011-10-06

    Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l?on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ?

  2. 43 CFR 2803.12 - What happens to my application or grant if I die?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false What happens to my application or grant if I die? 2803.12 Section 2803.12 Public Lands: Interior Regulations Relating to Public Lands... What happens to my application or grant if I die? (a) If an applicant or grant holder dies,...

  3. 43 CFR 2803.12 - What happens to my application or grant if I die?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What happens to my application or grant if I die? 2803.12 Section 2803.12 Public Lands: Interior Regulations Relating to Public Lands... What happens to my application or grant if I die? (a) If an applicant or grant holder dies,...

  4. 19 CFR 148.54 - Exemption for effects of citizens dying abroad.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 2 2013-04-01 2013-04-01 false Exemption for effects of citizens dying abroad... § 148.54 Exemption for effects of citizens dying abroad. (a) Exemption. Articles claimed to be personal... United States who died abroad may be allowed entry free of duty and tax under subheading 9804.00.85,...

  5. 19 CFR 148.54 - Exemption for effects of citizens dying abroad.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Exemption for effects of citizens dying abroad... § 148.54 Exemption for effects of citizens dying abroad. (a) Exemption. Articles claimed to be personal... United States who died abroad may be allowed entry free of duty and tax under subheading 9804.00.85,...

  6. 43 CFR 2883.14 - What happens to my application, grant, or TUP if I die?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What happens to my application, grant, or TUP if I die? 2883.14 Section 2883.14 Public Lands: Interior Regulations Relating to Public Lands... happens to my application, grant, or TUP if I die? (a) If an applicant or grant or TUP holder dies,...

  7. Strippable grid facilitates removal of grid-surfaced conical workpiece from die

    NASA Technical Reports Server (NTRS)

    Ruppe, E. P.

    1966-01-01

    Female die facilitates the removal of a sheet metal structure from a die used for explosive forming of the metal. The female die consists of a smooth conical frustum made of fiber glass with a cured epoxy-resin surface on which a molded grid pattern made of a polyurethane resin is overlaid.

  8. Method of making cascaded die mountings with springs-loaded contact-bond options

    DOEpatents

    Hsu, John S.; Adams, Donald J.; Su, Gui-Jia; Marlino, Laura D.; Ayers, Curtis W.; Coomer, Chester

    2007-06-19

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  9. 43 CFR 2883.14 - What happens to my application, grant, or TUP if I die?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false What happens to my application, grant, or TUP if I die? 2883.14 Section 2883.14 Public Lands: Interior Regulations Relating to Public Lands... happens to my application, grant, or TUP if I die? (a) If an applicant or grant or TUP holder dies,...

  10. 43 CFR 2803.12 - What happens to my application or grant if I die?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false What happens to my application or grant if I die? 2803.12 Section 2803.12 Public Lands: Interior Regulations Relating to Public Lands... What happens to my application or grant if I die? (a) If an applicant or grant holder dies,...

  11. 19 CFR 148.54 - Exemption for effects of citizens dying abroad.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 2 2014-04-01 2014-04-01 false Exemption for effects of citizens dying abroad... § 148.54 Exemption for effects of citizens dying abroad. (a) Exemption. Articles claimed to be personal... United States who died abroad may be allowed entry free of duty and tax under subheading 9804.00.85,...

  12. 43 CFR 2883.14 - What happens to my application, grant, or TUP if I die?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false What happens to my application, grant, or TUP if I die? 2883.14 Section 2883.14 Public Lands: Interior Regulations Relating to Public Lands... happens to my application, grant, or TUP if I die? (a) If an applicant or grant or TUP holder dies,...

  13. 26 CFR 20.2201-1 - Members of the Armed Forces dying during an induction period.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 14 2012-04-01 2012-04-01 false Members of the Armed Forces dying during an... TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER AUGUST 16, 1954 Miscellaneous § 20.2201-1 Members of the Armed Forces dying during an induction period. (a) The...

  14. 43 CFR 2883.14 - What happens to my application, grant, or TUP if I die?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false What happens to my application, grant, or TUP if I die? 2883.14 Section 2883.14 Public Lands: Interior Regulations Relating to Public Lands... happens to my application, grant, or TUP if I die? (a) If an applicant or grant or TUP holder dies,...

  15. 43 CFR 2803.12 - What happens to my application or grant if I die?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false What happens to my application or grant if I die? 2803.12 Section 2803.12 Public Lands: Interior Regulations Relating to Public Lands... What happens to my application or grant if I die? (a) If an applicant or grant holder dies,...

  16. Palliative and Curative Care Nurses' Attitudes Toward Dying and Death in the Hospital Setting.

    ERIC Educational Resources Information Center

    Thompson, Edward H.

    1986-01-01

    Examined sociodemographic background, nursing unit, amount of experience caring for dying patients, death anxiety, and attitudes toward working with dying patients among 56 nurses in palliative, surgical, and pediatric services. Work setting was found to be a more significant force in shaping attitudes toward caring for the dying than was…

  17. Cascaded die mountings with spring-loaded contact-bond options

    DOEpatents

    Hsu, John S.; Adams, Donald J.; Su, Gui-Jia; Marlino, Laura D.; Ayers, Curtis W.; Coomer, Chester

    2005-08-16

    A cascaded die mounting device and method using spring contacts for die attachment, with or without metallic bonds between the contacts and the dies, is disclosed. One embodiment is for the direct refrigerant cooling of an inverter/converter carrying higher power levels than most of the low power circuits previously taught, and does not require using a heat sink.

  18. 38 CFR 11.128 - Veteran dies without having filed application for final settlement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Veteran dies without... Amended (pub. L. 120, 68th Cong.) § 11.128 Veteran dies without having filed application for final settlement. If the veteran dies without having filed application for final settlement under the...

  19. 38 CFR 11.128 - Veteran dies without having filed application for final settlement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Veteran dies without... Amended (pub. L. 120, 68th Cong.) § 11.128 Veteran dies without having filed application for final settlement. If the veteran dies without having filed application for final settlement under the...

  20. 20 CFR 416.1266 - Individual under special resource provision dies after December 1973.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... dies after December 1973. 416.1266 Section 416.1266 Employees' Benefits SOCIAL SECURITY ADMINISTRATION... under special resource provision dies after December 1973. Where only one person, either the eligible individual or the eligible spouse, meets the conditions specified in § 416.1260 and that person dies...

  1. 43 CFR 3202.13 - What happens if the applicant dies before the lease is issued?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false What happens if the applicant dies before...) GEOTHERMAL RESOURCE LEASING Lessee Qualifications § 3202.13 What happens if the applicant dies before the lease is issued? If the applicant dies before the lease is issued, BLM will issue the lease to...

  2. 20 CFR 416.1266 - Individual under special resource provision dies after December 1973.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... dies after December 1973. 416.1266 Section 416.1266 Employees' Benefits SOCIAL SECURITY ADMINISTRATION... under special resource provision dies after December 1973. Where only one person, either the eligible individual or the eligible spouse, meets the conditions specified in § 416.1260 and that person dies...

  3. 20 CFR 416.1266 - Individual under special resource provision dies after December 1973.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... dies after December 1973. 416.1266 Section 416.1266 Employees' Benefits SOCIAL SECURITY ADMINISTRATION... under special resource provision dies after December 1973. Where only one person, either the eligible individual or the eligible spouse, meets the conditions specified in § 416.1260 and that person dies...

  4. 43 CFR 3202.13 - What happens if the applicant dies before the lease is issued?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What happens if the applicant dies before...) GEOTHERMAL RESOURCE LEASING Lessee Qualifications § 3202.13 What happens if the applicant dies before the lease is issued? If the applicant dies before the lease is issued, BLM will issue the lease to...

  5. 38 CFR 11.128 - Veteran dies without having filed application for final settlement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Veteran dies without... Amended (pub. L. 120, 68th Cong.) § 11.128 Veteran dies without having filed application for final settlement. If the veteran dies without having filed application for final settlement under the...

  6. 38 CFR 11.128 - Veteran dies without having filed application for final settlement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Veteran dies without... Amended (pub. L. 120, 68th Cong.) § 11.128 Veteran dies without having filed application for final settlement. If the veteran dies without having filed application for final settlement under the...

  7. 43 CFR 3202.13 - What happens if the applicant dies before the lease is issued?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false What happens if the applicant dies before...) GEOTHERMAL RESOURCE LEASING Lessee Qualifications § 3202.13 What happens if the applicant dies before the lease is issued? If the applicant dies before the lease is issued, BLM will issue the lease to...

  8. 20 CFR 416.1266 - Individual under special resource provision dies after December 1973.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... dies after December 1973. 416.1266 Section 416.1266 Employees' Benefits SOCIAL SECURITY ADMINISTRATION... under special resource provision dies after December 1973. Where only one person, either the eligible individual or the eligible spouse, meets the conditions specified in § 416.1260 and that person dies...

  9. 20 CFR 416.1266 - Individual under special resource provision dies after December 1973.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... dies after December 1973. 416.1266 Section 416.1266 Employees' Benefits SOCIAL SECURITY ADMINISTRATION... under special resource provision dies after December 1973. Where only one person, either the eligible individual or the eligible spouse, meets the conditions specified in § 416.1260 and that person dies...

  10. 38 CFR 11.128 - Veteran dies without having filed application for final settlement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Veteran dies without... Amended (pub. L. 120, 68th Cong.) § 11.128 Veteran dies without having filed application for final settlement. If the veteran dies without having filed application for final settlement under the...

  11. 43 CFR 3202.13 - What happens if the applicant dies before the lease is issued?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false What happens if the applicant dies before...) GEOTHERMAL RESOURCE LEASING Lessee Qualifications § 3202.13 What happens if the applicant dies before the lease is issued? If the applicant dies before the lease is issued, BLM will issue the lease to...

  12. Paternité des articles et intérêts concurrents : une analyse des recommandations aux auteurs des journaux traitant de pratique pharmaceutique

    PubMed Central

    Courbon, Ève; Tanguay, Cynthia; Lebel, Denis; Bussières, Jean-François

    2014-01-01

    RÉSUMÉ Contexte : La présence d’auteurs honorifiques et fantômes ainsi que les intérêts concurrents représentent des difficultés bien documentées, liées à la publication d’articles scientifiques. Il existe des lignes directrices encadrant la rédaction et la publication de manuscrits scientifiques, notamment celles de l’International Committee of Medical Journal Editors (ICMJE). Objectifs : L’objectif principal de cette étude descriptive et transversale visait à recenser les instructions portant sur la paternité des articles et les intérêts concurrents provenant des recommandations aux auteurs des journaux traitant de pratique pharmaceutique. L’objectif secondaire visait à déterminer des mesures correctrices pour une paternité des articles plus transparente. Méthode : La recherche a débuté par l’identification des journaux traitant de pratique pharmaceutique. La consultation des instructions aux auteurs des journaux a permis ensuite de recenser les recommandations destinées à éviter les problèmes de paternité des articles et d’intérêts concurrents. Finalement, les membres de l’équipe de recherche se sont consultés afin de définir des mesures correctrices possibles à l’intention des chercheurs. Résultats : Des 232 journaux traitant de pharmacie, 33 ont été définis comme traitant de pratique pharmaceutique. Un total de 24 (73 %) journaux mentionnaient suivre la politique de l’ICMJE, 14 (42 %) demandaient aux auteurs de remplir un formulaire de déclaration d’intérêts concurrents au moment de la soumission de l’article, 17 (52 %) présentaient une définition de la qualité d’auteur et 5 (15 %) demandaient de détailler les contributions de chaque auteur. Une grille de 40 critères a été élaborée pour définir l’attribution du statut d’auteur. Conclusion : Moins de la moitié des journaux demandait aux auteurs de transmettre un formulaire de déclaration des intérêts concurrents au moment de la

  13. Traitement des fractures des plateaux externes par vissage percutané assisté par arthroscopie

    PubMed Central

    Abouchane, Merouane; Belmoubarik, Amine; Benameur, Hamza; Haddoun, Ahmed Reda; Nechad, Mohammed

    2015-01-01

    Le but de notre étude est d'évaluer les résultats de fractures des plateaux tibiaux externes traitées par ostéosynthèse percutanée assistée par arthroscopie. Dix patients (8 hommes et 2 femmes) de 32 ans en moyenne ont subi cette intervention afin de réparer des fractures des plateaux tibiaux Schatzker I-III. Après avoir appliqué un garrot pneumatique, nous avons réduit et fixé la fracture au moyen de vis cannelées souschondrales. Lésions associées retrouvent deux lésions partielles du ménisque externe ont été retrouvé, traitées par résection partielle. Une orthèse de genou été de mise à but antalgique et protectrice pendant six semaines avec béquillage et interdiction de l'appui pour une durée de douze semaines avec reprise d'appui partiel au delà. La durée d'hospitalisation été d'une moyenne de cinq jours. La rééducation passive a été commence le lendemain de l'intervention et continuait dans chez un kinésithérapeute à la sortie du patient du service. Le suivi été à J7, J15, 1mois, 3mois, 6 mois puis tous les 6 mois. Neuf de nos patients ont été revu régulièrement sauf un perdu de vue. Le recul moyen de notre série été de 16 mois (10 et 24 mois). Le score de Lysholm a été utilisé pour évaluer les résultats cliniques chez nos neuf patients: excellent chez trois patients bons chez trois moyen chez un seul et mauvais chez deux patients. Tous nos neuf patients ont consolidé (figure 10 contrôle scopique d un article). Aucune gonarthrose n'a été note chez nos neuf patients due essentiellement au recul moyen faible de 16 mois. Le traitement des fractures des plateaux tibiaux externes assisté par arthroscopie produit des résultats satisfaisants et peut être accepté comme solution de rechange efficace au traitement des fractures des plateaux tibiaux causées par un choc de faible énergie. PMID:26587137

  14. Impact of Injection Slot Width and Final Composite Thickness for Attached-Die and Detached-Die Tapered Resin Injection Pultrusion

    NASA Astrophysics Data System (ADS)

    Ranjit, S.; Roux, J. A.; Jeswani, A. L.

    2013-08-01

    The objective of this study is to investigate the impact of two geometric design parameters (injection slot width and final composite thickness) on achieving complete wetout of the fiber reinforcement as well as the corresponding maximum chamber wall resin pressure inside a resin injection chamber for both the attached-die and detached-die configurations for various injection chamber lengths and compression ratios. This work compares the performances of the detached-die with the attached-die resin injection chamber configurations and determines the feasible manufacturing solutions.

  15. Chandra Observations of Dying Radio Sources in Galaxy Clusters

    NASA Technical Reports Server (NTRS)

    Murgia, M.; Markevitch, M.; Govoni, F.; Parma, P.; Fanti, R.; de Ruiter, H. R.; Mack, K.-H.

    2012-01-01

    Context. The dying radio sources represent a very interesting and largely unexplored stage of the active galactic nucleus (AGN) evolution. They are considered to be very rare, and almost all of the few known ones were found in galaxy clusters. However, considering the small number detected so far, it has not been possible to draw any firm conclusions about their X-ray environment. Aims. We present X-ray observations performed with the Chandra satellite of the three galaxy clusters Abell 2276, ZwCl 1829.3+6912, and RX J1852.1+5711, which harbor at their center a dying radio source with an ultra-steep spectrum that we recently discovered. Methods. We analyzed the physical properties of the X-ray emitting gas surrounding these elusive radio sources. We determined the global X-ray properties of the clusters, derived the azimuthally averaged profiles of metal abundance, gas temperature, density, and pressure. Furthermore, we estimated the total mass profiles. Results. The large-scale X-ray emission is regular and spherical, suggesting a relaxed state for these systems. Indeed, we found that the three clusters are also characterized by significant enhancements in the metal abundance and declining temperature profiles toward the central region. For all these reasons, we classified RX J1852.1+5711, Abell 2276, and ZwCl 1829.3+6912 as cool-core galaxy clusters. Conclusions. We calculated the non-thermal pressure of the radio lobes assuming that the radio sources are in the minimum energy condition. For all dying sources we found that this is on average about one to two orders of magnitude lower than that of the external gas, as found for many other radio sources at the center of galaxy groups and clusters. We found marginal evidence for the presence of X-ray surface brightness depressions coincident with the fossil radio lobes of the dying sources in A2276 and ZwCl 1829.3+691. We estimated the outburst age and energy output for these two dying sources. The energy power from

  16. Impact of Simulation Technology on Die and Stamping Business

    NASA Astrophysics Data System (ADS)

    Stevens, Mark W.

    2005-08-01

    Over the last ten years, we have seen an explosion in the use of simulation-based techniques to improve the engineering, construction, and operation of GM production tools. The impact has been as profound as the overall switch to CAD/CAM from the old manual design and construction methods. The changeover to N/C machining from duplicating milling machines brought advances in accuracy and speed to our construction activity. It also brought significant reductions in fitting sculptured surfaces. Changing over to CAD design brought similar advances in accuracy, and today's use of solid modeling has enhanced that accuracy gain while finally leading to the reduction in lead time and cost through the development of parametric techniques. Elimination of paper drawings for die design, along with the process of blueprinting and distribution, provided the savings required to install high capacity computer servers, high-speed data transmission lines and integrated networks. These historic changes in the application of CAE technology in manufacturing engineering paved the way for the implementation of simulation to all aspects of our business. The benefits are being realized now, and the future holds even greater promise as the simulation techniques mature and expand. Every new line of dies is verified prior to casting for interference free operation. Sheet metal forming simulation validates the material flow, eliminating the high costs of physical experimentation dependent on trial and error methods of the past. Integrated forming simulation and die structural analysis and optimization has led to a reduction in die size and weight on the order of 30% or more. The latest techniques in factory simulation enable analysis of automated press lines, including all stamping operations with corresponding automation. This leads to manufacturing lines capable of running at higher levels of throughput, with actual results providing the capability of two or more additional strokes per

  17. Chandra observations of dying radio sources in galaxy clusters

    NASA Astrophysics Data System (ADS)

    Murgia, M.; Markevitch, M.; Govoni, F.; Parma, P.; Fanti, R.; de Ruiter, H. R.; Mack, K.-H.

    2012-12-01

    Context. The dying radio sources represent a very interesting and largely unexplored stage of the active galactic nucleus (AGN) evolution. They are considered to be very rare, and almost all of the few known ones were found in galaxy clusters. However, considering the small number detected so far, it has not been possible to draw any firm conclusions about their X-ray environment. Aims: We present X-ray observations performed with the Chandra satellite of the three galaxy clusters Abell 2276, ZwCl 1829.3+6912, and RX J1852.1+5711, which harbor at their center a dying radio source with an ultra-steep spectrum that we recently discovered. Methods: We analyzed the physical properties of the X-ray emitting gas surrounding these elusive radio sources. We determined the global X-ray properties of the clusters, derived the azimuthally averaged profiles of metal abundance, gas temperature, density, and pressure. Furthermore, we estimated the total mass profiles. Results: The large-scale X-ray emission is regular and spherical, suggesting a relaxed state for these systems. Indeed, we found that the three clusters are also characterized by significant enhancements in the metal abundance and declining temperature profiles toward the central region. For all these reasons, we classified RX J1852.1+5711, Abell 2276, and ZwCl 1829.3+6912 as cool-core galaxy clusters. Conclusions: We calculated the non-thermal pressure of the radio lobes assuming that the radio sources are in the minimum energy condition. For all dying sources we found that this is on average about one to two orders of magnitude lower than that of the external gas, as found for many other radio sources at the center of galaxy groups and clusters. We found marginal evidence for the presence of X-ray surface brightness depressions coincident with the fossil radio lobes of the dying sources in A2276 and ZwCl 1829.3+691. We estimated the outburst age and energy output for these two dying sources. The energy power from

  18. Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

    NASA Astrophysics Data System (ADS)

    Savard, Stephane

    Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele

  19. Three-Dimensional Computed Tomography as a Method for Finding Die Attach Voids in Diodes

    NASA Technical Reports Server (NTRS)

    Brahm, E. N.; Rolin, T. D.

    2010-01-01

    NASA analyzes electrical, electronic, and electromechanical (EEE) parts used in space vehicles to understand failure modes of these components. The diode is an EEE part critical to NASA missions that can fail due to excessive voiding in the die attach. Metallography, one established method for studying the die attach, is a time-intensive, destructive, and equivocal process whereby mechanical grinding of the diodes is performed to reveal voiding in the die attach. Problems such as die attach pull-out tend to complicate results and can lead to erroneous conclusions. The objective of this study is to determine if three-dimensional computed tomography (3DCT), a nondestructive technique, is a viable alternative to metallography for detecting die attach voiding. The die attach voiding in two- dimensional planes created from 3DCT scans was compared to several physical cross sections of the same diode to determine if the 3DCT scan accurately recreates die attach volumetric variability

  20. Les neuropeptides gastro-intestinaux cibles des effets des rayonnements ionisants : altérations fonctionnelles

    NASA Astrophysics Data System (ADS)

    Linard, C.; Esposito, V.; Wysocki, J.; Griffiths, N. M.

    1998-04-01

    The symptoms associated with exposure to ionizing radiation are nausea, vomiting, diarrhoea. The response of the gut is complex involving modifications of motility and fluid and electrolyte transport. Gastrointestinal regulatory peptides have an important role in these functions. This study showed that radiation-induced tissue variations of neuropeptides have some repercussions on intestinal biological activity of these peptides soon after irradiation. In addition such modifications are also seen a few years after irradiation. Les symptômes associés à l'exposition aux rayonnements ionisants sont des nausées, vomissements et diarrhées. La réponse du système digestif est complexe, impliquant des modifications de la motilité et du transport d'eau et d'électrolytes. les neuropeptides gastro-intestinaux ont un rôle important dans ces fonctions. Cette étude montre que les variations tissulaires de ces neuropeptides induites par l'irradiation ont des répercussions sur l'activité biologique intestinale pour des temps précoces mais que ces perturbations sont encore visibles quelques années après l'irradiation.

  1. Vers des boites quantiques a base de graphene

    NASA Astrophysics Data System (ADS)

    Branchaud, Simon

    Le graphene est un materiau a base de carbone qui est etudie largement depuis 2004. De tres nombreux articles ont ete publies tant sur les proprietes electroniques, qu'optiques ou mecaniques de ce materiel. Cet ouvrage porte sur l'etude des fluctuations de conductance dans le graphene, et sur la fabrication et la caracterisation de nanostructures gravees dans des feuilles de ce cristal 2D. Des mesures de magnetoresistance a basse temperature ont ete faites pres du point de neutralite de charge (PNC) ainsi qu'a haute densite electronique. On trouve deux origines aux fluctuations de conductance pres du PNC, soit des oscillations mesoscopiques provenant de l'interference quantique, et des fluctuations dites Hall quantique apparaissant a plus haut champ (>0.5T), semblant suivre les facteurs de remplissage associes aux monocouches de graphene. Ces dernieres fluctuations sont attribuees a la charge d'etats localises, et revelent un precurseur a l'effet Hall quantique, qui lui, ne se manifeste pas avant 2T. On arrive a extraire les parametres caracterisant l'echantillon a partir de ces donnees. A la fin de cet ouvrage, on effectue des mesures de transport dans des constrictions et ilots de graphene, ou des boites quantiques sont formees. A partir de ces mesures, on extrait les parametres importants de ces boites quantiques, comme leur taille et leur energie de charge.

  2. Peste des Petits Ruminants Virus in Heilongjiang Province, China, 2014

    PubMed Central

    Wang, Miao; Wang, Shida; Liu, Zaisi; Shen, Nan; Si, Wei; Sun, Gang; Drewe, Julian A.; Cai, Xuehui

    2015-01-01

    During March 25–May 5, 2014, we investigated 11 outbreaks of peste des petits ruminants in Heilongjiang Province, China. We found that the most likely source of the outbreaks was animals from livestock markets in Shandong. Peste des petits ruminants viruses belonging to lineages II and IV were detected in sick animals. PMID:25811935

  3. Altération des sulfures des granulats dans les chaussées

    NASA Astrophysics Data System (ADS)

    Jigorel, A.; Jauberthie, R.

    2002-07-01

    Sulfides present in hornsfeld aggregates, used in light pavanent construction in contact with humid air alter rapidly. Crystallisation of sulfates at the interface of bitumastic material and sub-base creates serious problems (intumescence and crazing) that can lead to a total reconstruction of the project (roads, sidewalks, sports areas, etc). The sulfides in the aggregates and the sulfates produced due to alteration are studied by SEM and XRD. The results show that the intensity of this phenomenon is linked to the nature and the crystallinity of the sulfides. The evolution of the sulfates formed during this alteration process is slow and complex. In new pavements (3 years) the sulfates have a pulverised appearance and consist mostly of epsomite, associated with pickeringite and halotrichite. In older pavements (20 years) the sulfates form a fibrous concretion consisting of pickeringite and small quantities of halotrichite. Les sulfures présents dans les granulats élaborés à partir de cornéen nes s'altèrent rapidement dans les chaussées légères en présence d'air humide. La cristallisation des sulfates à l'interface enrobé-couche de fondation crée des désordres si importants (intumescences, faiençage) qu'il est bien souvent nécessaire d'assurer la réfection totale des ouvrages (routes, trottoirs, plateaux sportifs...). Les sulfures des granulats et les sulfates issus du processus d'altération ont été étudiés par diffractométrie X et examen su Microscope Electronique à Balayage équipé de microanalyse X. Les résultats montrent que !intensité des désordres est liée à la nature et à la cristallinité des sulfures. Les sulfates formés évoluent su cours du processus d'altération qui est long et complexe. Dans les chaussées récentes (3 ans) ils ont un aspect pulvérulent et sont constitués d'epsomite dominante associée à de la pickeringite et à de l'halotrichite. Dans les chaussées plus anciennes (20 ans) ils forment des concr

  4. Development of processing diagrams for polymeric die attach adhesives

    NASA Astrophysics Data System (ADS)

    Hsiung, Jen-Chou

    With a processing diagram, one can reduce the effort required to customize curing process conditions for polymeric die attach adhesives. Polymeric die attach adhesives are often cured per the manufacturer's recommendations during initial screening evaluations. In most cases, the recommended cure schedules have to be modified so as to fit differences in process equipment. Unfortunately, the modified cure schedule is usually determined by a trial-and-error method. An aim of our experiments is to understand the curing process of a wide range of polymeric die attach adhesives (conventional, fast, and snap cure adhesives) and to construct a processing diagram, i.e., "Bondability Diagram", so as to define the processing window. Such diagrams should be helpful in determining both the time and cure temperature required to produce high quality bonds. The bondability diagram can be constructed based on fundamental understandings of the phenomena involved in the curing process using a wide variety of tools. Differential Scanning Calorimetry (DSC) is utilized to study the cure kinetics and the extent of reaction. Dynamic Mechanical Analysis (DMA) is used to determine gelation times and melt viscosity under a shear mode. A modified Rheovibron is employed to perform cure characterizations under a tensile mode so that cure stresses could be determined. Thermogravimetric Analysis (TGA) is used to evaluate the outgassing phenomena. Optical Microscopy (OM) is used to detect voids. Results indicate that the cure behaviors of conventional, fast, and snap cure adhesives are different in several respects. The combination of DSC, DMA, TGA, OM, and lap shear test leads to a frame work of developing the bondability diagram concept. The bondability diagram concept provides a foundation for an understanding of the recommended cure schedule and allows one to design their own cure schedule.

  5. Sex Change Towards Female in Dying Acer rufinerve Trees

    PubMed Central

    NANAMI, SATOSHI; KAWAGUCHI, HIDEYUKI; YAMAKURA, TAKUO

    2004-01-01

    • Background and Aims Sex changes within the genus Acer (Aceraceae) may occur because of associations of sex expression and plant health. In this study, a natural population of Acer rufinerve was monitored to clarify the sex change patterns, the relationship between sex expression and plant health, and the causal environmental conditions that precede sex changes. • Methods Sex expression, growth rate and mortality of A. rufinerve trees in a natural population were monitored from 1992 to 1997. • Key Results Three types of sex expression were observed among A. rufinerve: male, female and bisexual. Among the three types of sex expression, sex changes occurred in all directions. In the growing season of 1994, precipitation was reduced. Stem growth rate decreased and mortality was high in 1994. In the spring of 1995, a drastic sex change from male to female or to bisexual occurred. As a result, the sex ratio became female‐biased in 1995, although it had been male‐biased from 1992 to 1994. In 1996 and 1997, the proportion of males in the population increased, partly as a result of female mortality and partly as a result of female‐to‐male sex changes. Sex expression of A. rufinerve was associated with their growth rate and mortality. The growth rate decreased for trees whose sex changed from male to female or to bisexual, and increased for trees whose sex changed from female to male or to bisexual. Dead trees reproduced as females before they died, except for those that died as males in 1994. • Conclusions One explanation for the sex change towards increasing femaleness for this A. rufinerve population in 1995 was the deterioration of plant health in the previous growing season, because of reduced precipitation. Sex changes of unhealthy and dying A. rufinerve towards femaleness may facilitate re‐occupancy by offspring in gaps created by the death of A. rufinerve trees. PMID:15102611

  6. Canada on course to introduce permissive assisted dying regime.

    PubMed

    Schuklenk, Udo

    2016-08-01

    Canada's Supreme Court decided in February 2015 that the criminalisation of assisted dying in the country violates the country's citizens and residents constitutional rights. This paper reviews policy recommendations produced by a special expert advisory panel appointed by Canada's provinces and territories, where the responsibility for the provision of health care lies. It also reviews a similar document produced by a special federal parliamentary committee. Based on the review of these two milestone documents it is argued that a Canadian consensus seems to emerge that foreshadows a permissive regulatory regime in that country. PMID:27009981

  7. Dying well? A colloquy on euthanasia and assisted suicide.

    PubMed

    Crigger, Bette-Jane

    1992-01-01

    With this special issue the Report once again joins the debate on what patients, physicians, and society can -- and cannot -- live with at the end of life. The articles gathered here address in various ways, from various perspectives, the questions that inform the debate on euthanasia and assisted suicide. Do the canons of self-determination and respect for persons compel us to honor the choices of those who request active assistance in dying? Can we coherently argue that physicians' professional obligations to alleviate suffering extend so far as to taking life on request? To what extent ought our policy decisions rest on consideration of possible consequences? PMID:11642997

  8. A merganser die-off associated with larval eustrongylides

    USGS Publications Warehouse

    Locke, L.N.; DeWitt, J.B.; Menzie, C.M.; Kerwin, J.A.

    1964-01-01

    A die-off of red-breasted mergansers on Lake Holly, Virginia Beach, Virginia, was found to be due to a larval Eustrongylides. Massive tissue destruction and hemorrhage was produced by the migration of the larval Eustrongylides. Earlier stages of the same Eustrongylides were found in eastern mosquitofish and silversides upon which the mergansers had been feeding. In addition, residues of DDT were found in mosquitofish, gizzard shad, and five mergansers collected from Lake Holly, and in the tissues of two mergansers from Back Bay, Virginia. However, the information available was insufficient to establish the significance of these residue levels.

  9. Spray forming system for producing molds, dies and related tooling

    DOEpatents

    McHugh, Kevin M.

    2000-01-01

    A system for the spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as powders, whiskers or fibers.

  10. Spray forming process for producing molds, dies and related tooling

    DOEpatents

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  11. Social work with dying and bereaved clients: helping the workers.

    PubMed

    Davidson, K W; Foster, Z

    1995-01-01

    This paper considers the stresses and satisfactions experienced by health care social workers as they help clients with grief and loss at a time of great fiscal restraint. Their clients face life-threatening illnesses such as AIDS and many forms of cancer. There are untimely losses in families and communities whose resources are dwindling. As social workers confront struggles with death and bereavement, they may receive limited support to deal with these stresses in their work. The authors suggest administrative strategies both to help workers reduce stress and increase satisfactions and to demonstrate the value of social work services to dying and bereaved clients along a continuum of health care. PMID:8560366

  12. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  13. Methodological issues associated with studying an illegal act: assisted dying.

    PubMed

    Volker, Deborah L

    2004-01-01

    The experience of receiving patient requests for assistance in prematurely ending life can represent both an ethical and legal dilemma for nurses in the United States. Similarly, the study of nurses' involvement with such a sensitive topic also poses risks to the study participants, the researcher, and the nursing profession's covenant with society. The purpose of this article is to explore methodological issues and approaches associated with studying an ethically and legally sensitive issue, and to describe application of these approaches to a study of oncology nurses' experiences with receiving requests for assisted dying from terminally ill patients with cancer. PMID:15206683

  14. [What can psychiatrists do for patients who want to die?].

    PubMed

    Okajima, Yoshiro

    2005-01-01

    The desire to commit suicide frequently arises in mentally ill patients, but how to present a persuasive argument to dissuade these patients from committing suicide remains a difficult challenge. This issue is considered below, while referring to the highly publicized Chabot case, in which a psychiatrist assisted in the suicide of a patient who was depressed by the loss of two sons under unfortunate circumstances. Euthanasia, or assisted suicide, has generally been criticized for the following reasons: 1) It is impossible to ascertain whether the free will of the patient, considered to be the fundamental basis for self-determination, was intact at the time of performing the procedure. 2) If the practice becomes widespread, then there exists the potential for vulnerable patients to receive perfunctory medical care; 3) Frequently, the desire to die is transient and ambivalent; 4) The ramifications associated with death extend beyond the individual and may be particularly acute with the family. Each of these arguments can be used as a logical counterargument to suicide, and, to the extent that they are based on the fact that death is irreversible, they are effective. However, although we are generally opposed to euthanasia and assisted suicide, we believe that these arguments are ill-suited for convincing individual patients not to commit suicide. An overview of discussions of the Chabot case is considered useful for reflecting on ways to prevent suicide, including psychotherapeutic relationships. The issue of how to respond to patients at a high risk of suicide in Japan is also considered based on these discussions. Lacking sufficient criteria for determining the competence of a patient who wants to die, the position that medical treatment can be provided simultaneously while assessing the competence of the patient is considered meaningless. In addition, there is a danger that strongly promoting the treatment of depression in patients at high risk for suicide denies

  15. Dying slowly with compassion and dignity: A commentary

    PubMed Central

    Rakos, Richard F.

    1998-01-01

    Fraley offers a provocative behavior-analytic perspective on the process of slow death. I argue that the value of his insightful analysis is severely compromised by his insistence on equating behavioral competence with personal worth. Fraley errs by proclaiming that his philosophy is science, that existing social practices are essential human attributes, and that idiosyncratic reinforcing stimuli are universally functional. Further, his philosophical tenet is fundamentally inconsistent with his genuinely humane goal of understanding and promoting protracted dying as a behavioral rather than metaphysical phenomenon. PMID:22478294

  16. Developing a Blended Course on Dying, Loss, and Grief

    PubMed Central

    Kavanaugh, Karen; Andreoni, V. Ann; Wilkie, Diana J.; Burgener, Sandra; Buschmann, MaryBeth Tank; Henderson, Gloria; Hsiung, Yi-Fang Yvonne; Zhao, Zhongsheng

    2010-01-01

    An important component of end-of-life education is to provide health professionals with content related to dying, loss, and grief. The authors describe the strategies used to develop and offer a blended course (integration of classroom face-to-face learning with online learning) that addressed the sensitive and often emotional content associated with grieving and bereavement. Using Kolb’s experiential learning theory, a set of 4 online learning modules, with engaging, interactive elements, was created. Course evaluations demonstrated the success of the blended course in comparison to the traditional, exclusive face-to-face approach. PMID:19412055

  17. Supporting families of dying patients in the intensive care units.

    PubMed

    Heidari, Mohammad Reza; Norouzadeh, Reza

    2014-01-01

    Family support in the intensive care units is a challenge for nurses who take care of dying patients. This article aimed to determine the Iranian nurses' experience of supporting families in end-of-life care. Using grounded theory methodology, 23 critical care nurses were interviewed. The theme of family support was extracted and divided into 5 categories: death with dignity; facilitate visitation; value orientation; preparing; and distress. With implementation of family support approaches, family-centered care plans will be realized in the standard framework. PMID:25099985

  18. Fissuration en relaxation des aciers inoxydables austénitiques au voisinage des soudures

    NASA Astrophysics Data System (ADS)

    Auzoux, Q.; Allais, L.; Gourgues, A. F.; Pineau, A.

    2003-03-01

    Des fissures intergranulaires peuvent se développer au voisinage des soudures des aciers inoxydables austénitiques lorsqu'ils sont réchauffés dans le domaine de température compris entre 500^{circ}C et 700^{circ}C. A ces températures, les contraintes résiduelles post-soudage se relaxent par déformation viscoplastique. Il peut arriver que ces zones proches de la soudure soient tellement fragiles, qu'elles ne puissent accommoder cette faible déformation. Afin de préciser quelles peuvent être les modifications microstructurales qui conduisent à une telle fragilisation, on a examiné les microstructures de ces zones et révélé ainsi un écrouissage résiduel, responsable d'une forte élévation de la dureté. On a pu reproduire par hypertrempe puis laminage entre 400^{circ}C et 600^{circ}C une microstructure similaire. Des essais mécaniques (traction, fluage, relaxation, sur éprouvettes lisses et pré-fissurées) ont été réalisés à 550^{circ}C et à 600^{circ}C sur ces zones affectées simulées et sur un état de référence hypertrempé. Ils ont montré que l'écrouissage diminuait la ductilité dans le domaine de rupture intergranulaire, sans modifier qualitativement le mécanisme d'endommagement. Pendant la pré-déformation les incompatibilités de déformation entre grains conduiraient à l'existence de contraintes locales élevées qui favoriseraient la germination des cavités intergranulaires.

  19. Hans Bethe : Des etoiles a la bombe

    NASA Astrophysics Data System (ADS)

    Bonnet-Bidaud, J. M.

    1996-06-01

    Il comprit le premier comment brillent les etoiles. Il fut aussi de cette poignee de scientifiques qui, dans le secret de Los Alamos, mirent au point la tristement celebre bombe atomique. Hans Bethe est l'un des derniers geants qui auront marque la physique de ce siecle d'une empreinte indelebile. C'est dans le bureau 01 du prestigieux laboratoire Kellog de l'institut Caltech qu'il a bien voulu retracer pour nous son impressionnante carriere, et revenir sur les motivations qui ont guide ses pas.

  20. Le traitement familial des enfants et des adolescents anorexiques : Des lignes directrices pour le médecin communautaire

    PubMed Central

    Findlay, S; Pinzon, J; Taddeo, D; Katzman, DK

    2010-01-01

    L’anorexie mentale (AM) est une maladie grave qui met la vie en danger et qui fait généralement son apparition pendant l’adolescence. Les données probantes au sujet du traitement optimal de l’AM chez les enfants et les adolescents sont en croissance, mais il reste beaucoup à apprendre. Même si les démarches thérapeutiques actuelles varient au Canada et ailleurs, les données jusqu’à présent indiquent que le traitement familial (TF) est le plus efficace pour les enfants et les adolescents anorexiques. Un élément essentiel du modèle de TF, c’est que les parents sont investis de la responsabilité de rétablir la santé physique de leur enfant et de s’assurer de la reprise complète de son poids. Le médecin qui comprend les principes fondamentaux et la philosophie du TF peut mettre en place les éléments de cette intervention fondée sur des faits probants auprès des jeunes patients anorexiques et de leur famille.

  1. Investigation of the interface phenomena and its effect on erosion and corrosion in aluminum die casting

    NASA Astrophysics Data System (ADS)

    Chu, Yeou-Li

    When performing an aluminum die casting operation, hot molten metal is injected into the die cavity. The die locks for part solidification. After the part solidifies, the casting will eject from the die. During this operation, the die surface experiences thermal cycling, high velocity impingement, chemical attack and interface friction. Thermal cycling leads to heat checking wear, high velocity impingement to erosive wear, chemical attack to soldering, and interface friction to the part bending and/or galling during ejection. The die casting process is a very capital intensive operation. All the above problems result in down time of the die casting shop. This down time results in loss of production and ultimately loss of capital. The purpose of this study is to (a) investigate the physical and chemical phenomena active at the die-cast aluminum metal interface, and (b) understand the performance of selected die surface treatments in protecting the interface from aluminum foundry alloy. Four laboratory tests were selected to study the aluminum die casting stages: (a) molten metal injection stage (erosive test), (b) filling and solidification (dissolution and wettability tests), and (c) parts ejection stage (friction test). Both qualitative and quantitative results were generated. This research produced many interesting discussions. In erosive testing, in addition to impingement velocity, the melt superheat and alloy types also found to play an important role in the erosion of the die steel. In the past, die casters believed that the higher molten aluminum temperature would cause higher erosive wear loss. However, this study found lower melt temperatures to result in greater erosive wear. In dissolution testing, the alloy elements were found to play an important role. In the past, die casters thought that Fe (Iron) was the main element which affects the dissolution of the die steel into the molten aluminum. This was found not to be necessary true. The Mn and Si

  2. Analysis and modeling of hot extrusion die for its service life enhancement

    NASA Astrophysics Data System (ADS)

    Akhtar, Syed Sohail

    Aluminum extrusion finds extensive application in the construction, automobile and aerospace industries. High pressures, elevated temperatures, complex and intricate section geometries lead to repeated mechanical and thermal stresses in the die and affiliated tooling. Product rework and rejects can be traced back to various defects spread over the die life cycle: die design, die manufacture and heat treatment, process parameters, inprocess die maintenance/correction and, billet type and quality. Therefore, improved and efficient service life of die and related tooling used in the extrusion press is one the most important factors in maximizing productivity and minimizing cost for ensuring the economical efficiency of an aluminum extrusion plant. How often a die has to be scrapped and replaced with a new one directly contributes to the commercial viability of producing a certain profile. The focus of the current work is on three distinct yet inter-related studies pertaining to the improvement of aluminum extrusion die. Study-A (Die Failure Analysis) is an investigation of various modes and critical failure types based on industrial data (Chapter-2 ), examination of failed dies and finite element simulation for identification of critical process parameters and design features in die fatigue-life (Chapter-3). In Study-B (Die Surface Hardening Treatment), two-stage controlled gas nitriding process for H13 steel is evaluated, both experimentally and numerically, in terms of nitrided case morphology and properties (Chapter-4) followed by experimental and numerical investigation of the effects of repeated nitriding (Chapter-5), pre-nitriding surface preparation (Chapter-6) and die profile geometry (Chapter-7) on nitriding performance in regard to die service life. In Study-C (Effect of Billet Quality on Die Life), the effect of billet quality and related influencing extrusion parameters on the die service life is investigated based on industrial data and some regression

  3. Revisiting Early Post-Injury Mortality: Are They Bleeding Because They are Dying or Dying Because They Are Bleeding?

    PubMed Central

    Morton, Alexander P.; Moore, Ernest E.; Wohlauer, Max V.; Lo, Karen; Silliman, Chris C.; Burlew, Clay Cothren; Banerjee, Ani

    2014-01-01

    Background Intense debate continues in the search of the optimal ratio of blood components to deliver preemptively in the critically injured patient anticipated to require a massive transfusion. A major challenge is distinguishing patients with refractory coagulopathy versus those with overwhelming injuries who will perish irrespective of blood component administration. The hypothesis of this clinical study is that a predominant number of early deaths from hemorrhage are irretrievable despite an aggressive transfusion policy. Materials and Methods During the 7-yr period ending in December 2009, there were 772 in-hospital trauma deaths. Each of these deaths had been assigned a cause of death via concurrent review by the multi-disciplinary hospital trauma QI committee. ED deaths and patients arriving from outside facilities were excluded from this study. Results Of the 382 patients (49.5%) who died secondary to acute blood loss, (84/22.0 %) survived beyond the ED; (68/82%) were male, mean age was 31, and (30/36%) sustained blunt trauma. Cause of death was determined to be exsanguination in (63/75 %), coagulopathy in (13/15 %), metabolic failure in (5/6%), and indeterminate in (3/3.7%) patients. Conclusion These data indicate that 75% of patients who succumb to postinjury acute blood loss are bleeding because they are dying rather than dying because they are bleeding. Conversely, only 13 (2%) of hospital deaths were attributed to refractory coagulopathy. These critical facts need to be considered in designing studies to determine optimal massive transfusion protocols. PMID:23138049

  4. Effect of Some Parameters on the Cast Component Properties in Hot Chamber Die Casting

    NASA Astrophysics Data System (ADS)

    Singh, Rupinder; Singh, Harvir

    2016-04-01

    Hot chamber die casting process is designed to achieve high dimensional accuracy for small products by forcing molten metal under high pressure into reusable moulds, called dies. The present research work is aimed at study of some parameters (as a case study of spring adjuster) on cast component properties in hot chamber die casting process. Three controllable factors of the hot chamber die casting process (namely: pressure at second phase, metal pouring temperature and die opening time) were studied at three levels each by Taguchi's parametric approach and single-response optimization was conducted to identify the main factors controlling surface hardness, dimensional accuracy and weight of the casting. Castings were produced using aluminium alloy, at recommended parameters through hot chamber die casting process. Analysis shows that in hot chamber die casting process the percentage contribution of second phase pressure, die opening time, metal pouring temperature for surface hardness is 82.48, 9.24 and 6.78 % respectively. While in the case of weight of cast component the contribution of second phase pressure is 94.03 %, followed by metal pouring temperature and die opening time (4.58 and 0.35 % respectively). Further for dimensional accuracy contribution of die opening time is 76.97 %, metal pouring temperature is 20.05 % and second phase pressure is 1.56 %. Confirmation experiments were conducted at an optimal condition showed that the surface hardness, dimensional accuracy and weight of the castings were improved significantly.

  5. Open-die forging of structurally porous sandwich panels

    SciTech Connect

    Elzey, D.M.; Wadley, H.N.G.

    1999-10-01

    Structurally porous metal sandwich panels consisting of dense face sheets and porous cores of controlled relative density can be manufactured by trapping inert gas during hot isostatic pressing and modifying its distribution via subsequent thermomechanical forming. A plane-strain solution for analyzing the open-die forging of such a plastically compressible sandwich panel is developed. An effective yield potential for the face sheet/core sandwich is constructed from the Mises yield criterion for the rigid-plastic face sheet and Doraivelu et al's density-dependent yield function for the compressible core. This effective constitutive response is used in a classical slab analysis of open-die forging. The analysis predicts the upsetting force and the distributions of pressure, core relative density, and average stresses within both the face sheet and the core. During upsetting, a zone of fully constrained material (i.e., with zero lateral strain) is predicted to occur at the center of the workpiece, and this densifies first. A densification front then advances laterally from the panel center toward the outer edges. The nonuniform densification complicates the use of forging for the production of components requiring a uniform density core.

  6. What Do Patients With Hypertrophic Cardiomyopathy Die from?

    PubMed

    Maron, Barry J; Rowin, Ethan J; Casey, Susan A; Garberich, Ross F; Maron, Martin S

    2016-02-01

    Hypertrophic cardiomyopathy (HC) has become a contemporary and treatable genetic heart disease, now with disease-related mortality reduced to as low as 0.5% per year, based largely on more effective risk stratification and the use of the implantable cardioverter-defibrillator for primary prevention of sudden death. This paradigm change in the natural history of HC has caused us to reconsider the overall mortality risk in this disease. We interrogated the databases of 2 HC referral centers, Minneapolis Heart Institute and Tufts Medical Center. Of 1,902 consecutive patients evaluated between 1992 and 2013, 1,653 patients (87%) have survived to the end of follow-up and 249 patients (13%) have died. Most deaths (178 of 249; 72%) were unrelated to HC, commonly because of cancer and predominantly in older patients. Non-HC mortality was significantly more common in adults presenting ≥ 60 years and least common in the youngest patients aged <30 years (p <0.001). Notably, deaths from non-HC causes substantially exceeded HC-related causes by 2.6-fold (p <0.001). In conclusion, only about 25% of patients with HC ultimately died of their disease, including predominantly those who were <30 years of age. These data allow patients with HC to develop a more realistic and reassured perception of their disease. PMID:26718233

  7. 'Aid-in-dying' and the taking of human life.

    PubMed

    Campbell, C S

    1992-09-01

    In several US states, the legalisation of euthanasia has become a question for voters to decide in public referenda. This democratic approach in politics is consistent with notions of personal autonomy in medicine, but the right of choice does not mean all choices are morally equal. A presumption against the taking of human life is embedded in the formative moral traditions of society; human life does not have absolute value, but we do and should impose a strict burden of justification for exceptions to the presumption, as exemplified by the moral criteria invoked to justify self-defence, capital punishment, or just war. These criteria can illuminate whether another exception should be carved out for doctor-assisted suicide or active euthanasia. It does not seem, in the United States at any rate, that all possible alternatives to affirm the control and dignity of the dying patient and to relieve pain and suffering, short of taking life, have been exhausted. Moreover, the procedural safeguards built into many proposals for legalised euthanasia would likely be undone by the sorry state of the US health care system, with its lack of universal access to care, chronic cost-containment ills, a litigious climate, and socioeconomic barriers to care. There remains, however, common ground in the quest for humane care of the dying. PMID:1404279

  8. LECRETIA SEALES AND AID IN DYING IN NEW ZEALAND.

    PubMed

    Gillett, Grant

    2015-12-01

    The application by Lecretia Seales, in relation to the lawfulness of physician aid in dying in New Zealand, was heard by Collins J, an experienced medical jurisprudentialist. It raised issues re-ignited by the recent Supreme Court of Canada ruling in Carter v Canada and the legislative change in California. Is a continued prohibition in Australasia and the United Kingdom against physician aid in dying causing patients to be subjected to cruel, inhumane and undignified deaths or, in fact, is a legislative change unnecessary given the level of care that patients can receive and the peaceful and harmonious deaths that we often hear about in hospice and other settings. A range of arguments, some traditional and some very contemporary, were canvassed in the case of Lecretia Seales and Collins J considered each of them, commenting in detail both on points of law and matters of ethical substance. A study of his judgment therefore makes fascinating reading for those interested in end-of-life decisions and the way they are dealt with in different developed world jurisdictions, and in particular, how such ethical matters may be considered from the point of view of indigenous and marginalised cultures. PMID:26939497

  9. 'Aid-in-dying' and the taking of human life.

    PubMed Central

    Campbell, C S

    1992-01-01

    In several US states, the legalisation of euthanasia has become a question for voters to decide in public referenda. This democratic approach in politics is consistent with notions of personal autonomy in medicine, but the right of choice does not mean all choices are morally equal. A presumption against the taking of human life is embedded in the formative moral traditions of society; human life does not have absolute value, but we do and should impose a strict burden of justification for exceptions to the presumption, as exemplified by the moral criteria invoked to justify self-defence, capital punishment, or just war. These criteria can illuminate whether another exception should be carved out for doctor-assisted suicide or active euthanasia. It does not seem, in the United States at any rate, that all possible alternatives to affirm the control and dignity of the dying patient and to relieve pain and suffering, short of taking life, have been exhausted. Moreover, the procedural safeguards built into many proposals for legalised euthanasia would likely be undone by the sorry state of the US health care system, with its lack of universal access to care, chronic cost-containment ills, a litigious climate, and socioeconomic barriers to care. There remains, however, common ground in the quest for humane care of the dying. PMID:1404279

  10. Machine Tool User Cylindrical Die Rolling Performance Support System

    SciTech Connect

    Bohley, M.C.; Grothe, V.D.

    1998-08-06

    This project was initiated to provide the machine tool industry and the DOE a method for evaluating educating potential users about various aspects of the cylindrical die rolling process including: characteristics of the cylindrical die rolling processes, major productivity and material savings benefits, advantages for use in the fastener industry, production capabilities based on part parameters, and production capabilities based on machine specifications. AlliedSignal Federal Manufacturing and Technologies (ASFM and T) utilized data provided by Kinefac Corporation to develop an interactive performance support system. AlliedSignal developed one complete branch of the program and Kinefac will develop the remaining two branches. Macromedia Authorware version 3.5 and Microsoft Access version 7.0 were selected for development tools. These software tools maximize continued program development ease and program management with future machine technology advancements. Using this authoring tool and the external database resulted in development of a product that has many potential uses within the manufacturing industry. Source code for the product can be used as a template for other applications is reusable and can provide potential solutions to non-manufacturing needs. The final product will be released on CD-ROM.

  11. Study on stretching effect of multiple die forming technology

    NASA Astrophysics Data System (ADS)

    Park, Ji-woo; Kim, Jeong; Kang, Beom-soo

    2013-12-01

    The multiple die forming (MDF) technology is suitable for flexible manufacturing, and it affords several advantages including its applicability to various forming processes such as single-curved surface forming, and double-curved surface forming. In sheet metal forming process, the elastic recovery has become a problem. Therefore, the stretch forming process is applied MDF technology to reduce elastic recovery effect. Numerical simulation is carried out for a saddle-type surface forming using ABAQUS. Every simulation case performs spring-back analysis to find elastic recovery effect after forming simulation. In this simulation, urethane pads are defined based on a hyperelastic material model as a cushion for the smoothness of forming surface. The elastic recovery deformation behavior is also investigated to consider the exact result after the last forming process, and then, the actual experiments are performed to confirm the formability of this forming process. By comparing the simulation and the experimental results, the tendency of the decreased amount of elastic recovery from the application of stretch process is verified. Consequently, it is confirmed that the multiple die stretch forming process has the capability and feasibility of being used to manufacture the curved surfaces of sheet metal.

  12. Loneliness: a concept relevant to the care of dying persons.

    PubMed

    Zack, M V

    1985-06-01

    Loneliness, whether conceptualized as a basic "fact" of human existence or as a painful, subjective experience in response to changes or deficiencies in the quality or quantity of a person's social relationships, has been recognized as an experience feared or felt by human beings since antiquity. As health care professionals, nurses have observed and responded to loneliness as an actual or potential problem amenable to nursing intervention. Being a subjective experience and one which may or may not be connected to the more objective condition of social isolation or aloneness, loneliness has puzzled scholars and researchers across disciplines. Although the nature of loneliness as a relational deficit is beginning to be explicated, particularly through the efforts of social psychologists, there are still major questions to be answered with regard to antecedents, manifestations, and interventions. Dying persons may represent a particularly vulnerable group, especially those dying in an acute care/cure-oriented setting. Since the limited knowledge about the nature of loneliness has been acquired primarily through studying college students or young adults, the question of whether or not their experience is comparable to that of other groups remains to be answered. Nurses continue to make clinical judgments about the loneliness of their patients. They basically are guided by a knowledge of affiliative functioning, and their interventions reflect a goal of optimal, social functioning for individuals experiencing or at-risk for loneliness. PMID:3846982

  13. Die Parting welt marks' measurement using structured laser analysis

    NASA Astrophysics Data System (ADS)

    Sarr, Dennis P.; Mullen, Joey H.

    1997-01-01

    Heating and cooling air for an aircraft interior is transported using metal ducts. These ducts vary in size from a few centimeters to twelve centimeters in diameter. In the assembly of aircraft air ducts, coupling is swaged onto the ducts. In assuring the mechanical dies are operating properly the die parting welt mark is inspected. The current method of visual inspection and checking with calipers does not allow implementation of statistical process control methods. In an effort to improve this process check, a new measurement method is being developed. A feasibility study indicated that a structured light laser system would be a good approach. A few requirements are: it must be portable to be used at different locations within the fabrication area, it must be fast, it should be easy to use by the mechanic, the reading must be accurate, a hard copy print out is required, and it must be non-destructive. Due to the mechanical configuration of the duct and coupling, a camera with magnification optics is used. The measurement of the bump has a maximum height of 50.8 microns. The prototype systems uses computer vision and custom software written in the C language. This paper discusses different measurement methods tested and the benefits of each technology. The development of a specialized system is justified for production use. This paper describes the prototype system and some of its configuration for factory testing.

  14. 26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... decedent dying after 1970. 20.6036-2 Section 20.6036-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying after 1970. In the case of the estate of a decedent dying after December 31, 1970,...

  15. 26 CFR 20.6036-1 - Notice of qualification as executor of estate of decedent dying before 1971.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... of decedent dying before 1971. 20.6036-1 Section 20.6036-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying before 1971. (a) Preliminary notice for estates of decedents dying before January 1,...

  16. 26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... of decedent dying after 1970. 20.6036-2 Section 20.6036-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying after 1970. In the case of the estate of a decedent dying after December 31, 1970,...

  17. 26 CFR 20.6036-1 - Notice of qualification as executor of estate of decedent dying before 1971.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... decedent dying before 1971. 20.6036-1 Section 20.6036-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying before 1971. (a) Preliminary notice for estates of decedents dying before January 1,...

  18. 26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... of decedent dying after 1970. 20.6036-2 Section 20.6036-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying after 1970. In the case of the estate of a decedent dying after December 31, 1970,...

  19. 26 CFR 20.6036-1 - Notice of qualification as executor of estate of decedent dying before 1971.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... of decedent dying before 1971. 20.6036-1 Section 20.6036-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying before 1971. (a) Preliminary notice for estates of decedents dying before January 1,...

  20. 26 CFR 20.6036-1 - Notice of qualification as executor of estate of decedent dying before 1971.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... decedent dying before 1971. 20.6036-1 Section 20.6036-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying before 1971. (a) Preliminary notice for estates of decedents dying before January 1,...

  1. 26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... decedent dying after 1970. 20.6036-2 Section 20.6036-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying after 1970. In the case of the estate of a decedent dying after December 31, 1970,...

  2. 26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... of decedent dying after 1970. 20.6036-2 Section 20.6036-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES ESTATE TAX; ESTATES OF DECEDENTS DYING AFTER... decedent dying after 1970. In the case of the estate of a decedent dying after December 31, 1970,...

  3. The living-dying interval in nursing home-based end-of-life care: family caregivers' experiences.

    PubMed

    Waldrop, Deborah P; Kusmaul, Nancy

    2011-11-01

    Guided by concepts from the living-dying interval ( Pattison, 1977 ) this study sought to explore family members' experiences with a dying nursing home resident. In-depth interviews were conducted with 31 caregivers of residents who had died. Interviews were audiotaped and transcribed. Themes that illuminated families' experiences on the living-dying interval were: an acute medical crisis (trigger events, accumulation of stressors, level of care crisis); the living-dying phase (advance care planning, hospitalization, end-stage decisions); and the terminal phase (beginning of the end, awareness of dying). The results illustrate critical periods for social work intervention with families of dying nursing home residents. PMID:22060004

  4. Laser tabbed die: A repairable, high-speed die-interconnection technology. 1994 LDRD final report 93-SR-089

    SciTech Connect

    Malba, V.; Bernhardt, A.F.

    1995-09-01

    A unique technology for multichip module production is presented. The technology, called Laser Tabbed Die (L-TAB), consists of a method for forming surface-mount-type {open_quotes}gull wing{close_quotes} interconnects on bare dice. The dice are temporarily bonded to a sacrificial substrate which has a polymer thin film coated onto it. The gull wings are formed on the side of the die with a direct-write laser patterning process which allows vertical as well as horizontal image formation. Using the laser patterning system, trenches are formed in a positive electrodeposited photoresist (EDPR) which is plated onto a metal seed layer, allowing copper to be electroplated through the resultant mask. After stripping the resist and the metal seed layer, the polymer film on the substrate is dissolved, releasing the chip with the {open_quotes}gull wings{close_quotes} intact. The chips are then bonded onto a circuit board or permanent substrate with solder or conductive adhesive.

  5. Many parents think their child is dying when having a first febrile convulsion.

    PubMed

    Baumer, J H; David, T J; Valentine, S J; Roberts, J E; Hughes, B R

    1981-08-01

    Fifty parents of 36 consecutive children admitted to hospital with their first febrile convulsion were interviewed shortly after the event. Very few parents voluntarily said that they had thought their child was dying, but when asked specifically the majority said they had thought the child was dying or likely to die. This common fear should be kept in mind when discussing febrile convulsions with parents, who are unlikely to volunteer the information. PMID:7274593

  6. Laser micromachining of through via interconnects in active die for 3-D multichip module

    SciTech Connect

    Chu, D.; Miller, W.D.

    1995-09-01

    One method to increase density in integrated circuits (IC) is to stack die to create a 3-D multichip module (MCM). In the past, special post wafer processing was done to bring interconnects out to the edge of the die. The die were sawed, glued, and stacked. Special processing was done to create interconnects on the edge to provide for interconnects to each of the die. These processes require an IC type fabrication facility (fab) and special processing equipment. In contrast, we have developed packaging assembly methods to created vertical through vias in bond pads of active silicon die, isolate these vias, and metal fill these vias without the use of a special IC fab. These die with through vias can then be joined and stacked to create a 3-D MCM. Vertical through vias in active die are created by laser micromachining using a Nd:YAG laser. Besides the fundamental 1064 nm (infra-red) laser wavelength of a Nd:YAG laser, modifications to our Nd:YAG laser allowed us to generate the second harmonic 532 nm (green) laser wavelength and fourth harmonic 266nm (ultra violet) laser wavelength in laser micromachining for these vias. Experiments were conducted to determine the best laser wavelengths to use for laser micromachining of vertical through vias in order to minimize damage to the active die. Via isolation experiments were done in order to determine the best method in isolating the bond pads of the die. Die thinning techniques were developed to allow for die thickness as thin as 50 {mu}m. This would allow for high 3-D density when the die are stacked. A method was developed to metal fill the vias with solder using a wire bonder with solder wire.

  7. OzDES Spectroscopic Classification of DES13X3woy

    NASA Astrophysics Data System (ADS)

    Yuan, F.; Childress, M.; Sharp, R.; Lidman, C.; Parkinson, D.; Mould, J.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; D'Andrea, C.; Nichol, R.; Papadopoulos, A.; Sullivan, M.; Maartens, R.; Smith, M.; Barbary, K.; Bernstein, J. P.; Biswas, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Bloom, J. S.; Goldstein, D.; Kim, A.; Nugent, P.; Perlmutter, S.; Thomas, R. C.; Foley, R. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Covarrubias, R. A.; Cane, R.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.

    2014-01-01

    We report spectroscopic classification by OzDES of a supernova discovered by the Dark Energy Survey (ATel #4668). The spectrum (370-885nm) was obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT). Object classification was performed using superfit (Howell and Wang, 2002, BAAS, 34, 1256), the details of which are reported in the table below.

  8. The Effects of Externally Solidified Product on Wave Celerity and Quality of Die Cast Products

    SciTech Connect

    Carroll Mobley; Yogeshwar Sahai; Jerry Brevick

    2003-10-10

    The cold chamber die casting process is used to produce essentially all the die cast aluminum products and about 50% of the die cast magnesium products made today. Modeling of the cold chamber die casting process and metallographic observations of cold chamber die cast products indicate that typically 5 to 20% of the shot weight is solidified in the shot sleeve before or during cavity filling. The protion of the resulting die casting which is solidified in the shot sleeve is referred to as externally solidified product, or, when identified as a casting defect, as cold flakes. This project was directed to extending the understanding of the effects of externally solidified product on the cold chamber die casting process and products to enable the production of defect-free die castings and reduce the energy associated with these products. The projected energy savings from controlling the fraction of externally solidified product in die cast components is 40 x 10 Btu through the year 2025.

  9. The Effect of Temperature Condition on Material Deformation and Die Wear

    NASA Astrophysics Data System (ADS)

    Zhi, Jia; Jie, Zhou; Jin-jin, Ji; Liang, Huang; Hai, Yang

    2013-07-01

    The characteristics of temperature change on die and billet are very complex during the deformation process because of the interaction between them and some unstable external factors. In this paper, the numerical simulation model for the crank shaft die forging was established by means of the rigid-plastic FEM method. The model was validated by optical non-contact 3D measurement—ATOS. Based on available research results, this paper explored the effect of temperature conditions on material deformation and die wear. Three parameters, press velocity and initial temperature of billet and die, were chosen to illustrate the effects. From the experimental results, the effect of process parameters on deformation ability of the material is simple, while the effect on die wear is relatively complicated. The press velocity plays an important role on die wear when the initial temperature of the billet has larger influence on material deformation. A conclusion can be drawn that when the initial temperature of the billet is 1100 °C, the initial temperature of the die is 250 °C, and the velocity is kept in the range of 200-300 mm/s, the optimum solution for deformation ability of the material and die wear can be obtained. It is possible for the conclusion to be extended further for the control of temperature condition to optimize die life and material deformation.

  10. Interfacial Heat Transfer during Die Casting of an Al-Si-Cu Alloy

    NASA Astrophysics Data System (ADS)

    Hamasaiid, A.; Wang, G.; Davidson, C.; Dour, G.; Dargusch, M. S.

    2009-12-01

    The relationship between in-cavity pressure, heat flux, and heat-transfer coefficient during high-pressure die casting of an Al-9 pct Si-3 pct Cu alloy was investigated. Detailed measurements were performed using infrared probes and thermocouple arrays that accurately determine both casting and die surface temperatures during the pressure die casting of an aluminum A380 alloy. Concurrent in-cavity pressure measurements were also performed. These measurements enabled the correlation between in-cavity pressure and accurate heat-transfer coefficients in high-pressure die-casting operations.

  11. "Wenn die Erde bebt", an educational public exhibition in Vienna

    NASA Astrophysics Data System (ADS)

    Parithusta, Rizkita; Brueckl, Ewald; Heuer, Rudolf; Mitterbauer, Ulrike

    2010-05-01

    Natural disasters can cause the loss of human lives, an economic crisis and also the loss of irreplaceable cultural heritage. Earthquakes can mean instantaneous destruction without warning, causing extensive and often irreparable damage to our heritage. An exhibition with the title "Wenn die Erde bebt" (i.e. "When the Earth shakes") which was held at the Natural History Museum, Vienna; in an effort to introduce understanding, awareness, and preparedness to the public, facing earthquake phenomenon. The exhibition compiled and classified examples of large earthquakes and introduces into the basic principles of seismology. It further addresses earthquake impact and how to live with earthquakes, giving access to the most suitable procedure of safety education. The idea of the exhibition is communicated by the means of posters, videos, and physical models which support the understanding of seismometry, elastic rebound theory and earthquake resistant construction. The exhibition is an Austrian contribution to IYPE - International Year of Planet Earth and is now on tour through Austria.

  12. Notched bar Izod impact properties of zinc die castings

    SciTech Connect

    Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

    2007-03-01

    Notched bar Izod impact testing of zinc die cast Alloy 3, Alloy 5, ZA-8, and AcuZinc 5 was performed at five temperatures between -40\\mDC and room temperature in accordance with ASTM E23 for impact testing of metallic materials. A direct comparison between ASTM D256 for impact testing of plastics and ASTM E23 was performed using continuously cast zinc specimens of Alloy 5 and ZA-8 at -40\\mDC and room temperature. There are differences in sample sizes, impact velocity, and striker geometry between the two tests. Bulk zinc tested according to ASTM E23 resulted in higher impact energies at -40\\mDC and lower impact energies at room temperature then did the same alloys when tested according to ASTM D256.

  13. High-Pressure Die-Casting: Contradictions and Challenges

    NASA Astrophysics Data System (ADS)

    Bonollo, Franco; Gramegna, Nicola; Timelli, Giulio

    2015-05-01

    High-pressure die casting (HPDC) is particularly suitable for high production rates and it is applied in several industrial fields; actually, approximately half of the world production of light metal castings is obtained by this technology. An overview of the actual status of HPDC technology is described in the current work, where both critical aspects and potential advantages are evidenced. Specific attention is paid to the quality requirements from the end users, as well as to the achievable production rate, the process monitoring and control, and the European and worldwide scenario. This overview leads to individuate the most relevant challenges for HPDC industry: "zero-defect" production, real-time process control, understanding the role of the process variables, process optimization, introduction of research and development activities, and disseminating the knowledge about HPDC technology. Performing these actions, HPDC foundries could achieve a more mature and efficient approach to large end users and exploit their really relevant potential.

  14. Development of Thin Section Zinc Die Casting Technology

    SciTech Connect

    Goodwin, Frank

    2013-10-31

    A new high fluidity zinc high pressure die casting alloy, termed the HF alloy, was developed during laboratory trials and proven in industrial production. The HF alloy permits castings to be achieved with section thicknesses of 0.3 mm or less. Technology transfer activities were conducted to develop usage of the HF high fluidity alloy. These included production of a brochure and a one-hour webinar on the HF alloy. The brochure was then sent to 1,184 product designers in the Interzinc database. There was excellent reception to this mailing, and from this initial contact 5 technology transfer seminars were conducted for 81 participants from 30 companies across a wide range of business sectors. Many of the successful applications to date involve high quality surface finishes. Design and manufacturing assistance was given for development of selected applications.

  15. Unique aspects of caring for dying children and their families.

    PubMed

    Zwerdling, T; Davies, S; Lazar, L; Crawford, B; Tucker, L; Boughner, A; Richter-Beck, L

    2000-01-01

    Pediatric hospice has become an important service for children and their families in the past decade. In this article we present unique aspects of StarShine, the hospice of Children's Hospital Medical Center in Cincinnati, Ohio. Length-of-service data demonstrate the need to find innovative ways of encouraging earlier referral to hospice. Several specialized aspects of care, such as long-term bereavement, pet visitation and social services for the family are presented. The initiation of a novel in-home pain management program is described. StarShine has not followed an adult hospice model, and as such, we discuss those unique aspects of dying pediatric patients and suggest specific solutions and interventions designed for children. PMID:11886054

  16. Rapid variability, dying pulse trains and black holes

    NASA Technical Reports Server (NTRS)

    Stoeger, W. R.

    1980-01-01

    After reviewing the general model and arguments by which rapid temporal variability and quasi-periodicities are considered indicative of a compact source's possible black hole character, the paper presents a scenario for 'dying pulse trains'. These originate inside the inner edge of accretion disks encircling black holes from accreting flares or other self-luminous entities executing their final few revolutions before reaching the event horizon. Confirmed detection of such phenomena with time scales in the range 0.01 (M/solar mass) to 0.5 (M/solar mass)ms, where M is the mass of the compact source, would provide much better support for its black hole candidacy. Variability on time-scales larger than this by itself places few constraints on the nature of the compact object.

  17. A support group for fathers whose partners died from cancer.

    PubMed

    Yopp, Justin Michael; Rosenstein, Donald Lee

    2013-04-01

    Men who are raising dependent children after their spouses or partners have died from cancer face unique challenges adjusting to single parenthood while managing their grief and the grief of their children. Unfortunately, the needs of those widowers have been overlooked in the clinical literature and no published interventions are designed specifically for that population. The current article details the creation and implementation of a peer support group for fathers recently widowed because of their wives' deaths from cancer. Initial observations and emergent themes from the group are described. Group members suggested that they benefited from participation in the support group and that this form of psychosocial support is a promising intervention for fathers in similar circumstances. PMID:23538252

  18. Vacuum Die Casting of Silicon Sheet for Photovoltaic Applications

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The development of a vacuum die-casting process for producing silicon sheet suitable for photovoltaic cells with a terrestrial efficiency greater than 12 percent and having the potential to be scaled for large quantity production is considered. The initial approach includes: (1) obtaining mechanical design parameters by using boron nitride, which has been shown to non-wetting to silicon; (2) optimizing silicon nitride material composition and coatings by sessile drop experiments; (3) testing effectiveness of fluoride salt interfacial media with a graphite mold; and (4) testing the effect of surface finish using both boron nitride and graphite. When the material and mechanical boundary conditions are established, a finalized version of the prototype assembly will be constructed and the casting variables determined.

  19. Nonlinear characteristics in fracture strength test of ultrathin silicon die

    NASA Astrophysics Data System (ADS)

    Liu, Zunxu; Huang, YongAn; Xiao, Lin; Tang, Pengpeng; Yin, Zhouping

    2015-04-01

    The precise evaluation of fracture strength of ultrathin (<50 μm thick) silicon chips/ribbons plays a critical role in design of deformability and lifetime of flexible/stretchable electronics. In its three-point bending test, however, the classical linear theory used to convert the experimental fracture load into fracture strength value fails to match the emerged geometrically nonlinear characteristics for such an ultrathin silicon die. Here, we consider the geometric large deformation and present its nonlinear solution to more reliably evaluate the fracture stress of ultrathin specimen by virtue of the obtained experimental fracture load. A quite good agreement on experiments shows that the nonlinear analytical predictions allow a more comprehensive understanding for the effects of the silicon samples’ thickness on the transformation from linear relation to nonlinearity. The comparisons indicate that the fracture strength values are lower from linear evaluations, and to this the corresponding correction factor is defined to enhance the estimate precision.

  20. Effects of molten aluminum on H13 dies and coatings

    NASA Astrophysics Data System (ADS)

    Yu, M.; Shivpuri, R.; Rapp, R. A.

    1995-04-01

    The effects of molten aluminum casting alloy A390 on a commercially heat treated H13 die steel and two wear-resistant coatings, Cr23C6 and TiN, were investigated by an accelerated corrosion test. The H13 steel suffered severe corrosion due to the rapid formation of intermetallic compounds. The formation of multilayer intermetallic compounds and the simultaneous dissociation of the intermetallic compound τ6 (Al4FeSi) were attributed to the fast dissolution of H13 steels into the melt. This dissolution of the H13 steel was accelerated dramatically by turbulence and an increase in melt temperature. Significant improvement in corrosion resistance was achieved for the H13 steel coated by Cr23C6 via a pack cementation process.