Operative record using intraoperative digital data in neurosurgery.

PubMed

Houkin, K; Kuroda, S; Abe, H

2000-01-01

The purpose of this study was to develop a new method for more efficient and accurate operative records using intra-operative digital data in neurosurgery, including macroscopic procedures and microscopic procedures under an operating microscope. Macroscopic procedures were recorded using a digital camera and microscopic procedures were also recorded using a microdigital camera attached to an operating microscope. Operative records were then recorded digitally and filed in a computer using image retouch software and database base software. The time necessary for editing of the digital data and completing the record was less than 30 minutes. Once these operative records are digitally filed, they are easily transferred and used as database. Using digital operative records along with digital photography, neurosurgeons can document their procedures more accurately and efficiently than by the conventional method (handwriting). A complete digital operative record is not only accurate but also time saving. Construction of a database, data transfer and desktop publishing can be achieved using the intra-operative data, including intra-operative photographs.

Analysis of Digitized Seismograms from Russian Geophysical Survey Stations of Soviet Peaceful Nuclear Explosions

DTIC Science & Technology

2009-09-30

YAK ). Seismograms are plotted both as raw data (Figure 5 top) and with a 4 Hz high pass filter (Figure 5 bottom). In both cases, relative Lg/P...amplitude ratios are high for the earthquake (green) and low for the PNE (red). Neva PNE vs Quake At YAK IfrmHlH" i.MlTCBnWft*1 YAK A Neva 2-2 o...26 April 1994 km 0 wo isu* | Time - seconds Nevo PNE vs Quake At YAK - HP 4 HZ - 20 sps Time - seconds Figure 5

Recording multiple spatially-heterodyned direct to digital holograms in one digital image

DOEpatents

Hanson, Gregory R [Clinton, TN; Bingham, Philip R [Knoxville, TN

2008-03-25

Systems and methods are described for recording multiple spatially-heterodyned direct to digital holograms in one digital image. A method includes digitally recording, at a first reference beam-object beam angle, a first spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded first spatially-heterodyned hologram by shifting a first original origin of the recorded first spatially-heterodyned hologram to sit on top of a first spatial-heterodyne carrier frequency defined by the first reference beam-object beam angle; digitally recording, at a second reference beam-object beam angle, a second spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded second spatially-heterodyned hologram by shifting a second original origin of the recorded second spatially-heterodyned hologram to sit on top of a second spatial-heterodyne carrier frequency defined by the second reference beam-object beam angle; applying a first digital filter to cut off signals around the first original origin and define a first result; performing a first inverse Fourier transform on the first result; applying a second digital filter to cut off signals around the second original origin and define a second result; and performing a second inverse Fourier transform on the second result, wherein the first reference beam-object beam angle is not equal to the second reference beam-object beam angle and a single digital image includes both the first spatially-heterodyned hologram and the second spatially-heterodyned hologram.

jSynthesizer: A Java based first-motion synthetic seismogram tool

NASA Astrophysics Data System (ADS)

Sullivan, Mark

2009-10-01

Both researchers and educators need software tools to create synthetic seismograms to model earthquake sources. We have developed a program that generates first-motion synthetic seismograms that is highly interactive and suited to the needs of both research and education audiences. Implemented in the Java programming language, our program is available for use on Windows, Mac OS X and Linux operating systems. Our program allows the user to input the fault parameters strike, dip and slip angle, numerically or graphically using a lower hemisphere equal-area stereographic projection of the focal sphere of the earthquake. This representation is familiar to geologists and seismologists as the standard way of displaying the orientation of a fault in space. The user is also able to enter the relative location of the seismograph and the depth and crustal velocity structure in the vicinity of the earthquake. The direct P wave along with reflections off of layer boundaries near the source are generated using a constant ray-parameter approximation. The instrument response functions used by the Worldwide Standardized Seismogram Network and the attenuation response of the Earth's mantle are generated in the frequency domain and applied to generate the synthetic seismogram. Planned enhancements to this program will allow the simultaneous generation of seismograms at many stations as well as more complicated crustal structures.

An Introduction to SPEAR (Seismogram Picking Error from Analyst Review)

NASA Astrophysics Data System (ADS)

Zeiler, C. P.; Velasco, A. A.; Anderson, D.; Pingitore, N. E.

2008-12-01

A grassroots initiative began in February of 2008 at the University of Texas at El Paso to understand how seismologists measure earthquakes. The Seismogram Picking Error from Analyst Review (SPEAR) project is designed to be a forum where seismologists can propose, discuss and experimentally test theories on proper procedures to identify and measure seismic phases. We outline the history of seismogram analysis and explore areas of seismogram analysis that still need to be defined. The main concern for SPEAR, at this time, is the impact of picking errors produced by merging earthquake catalogs. Our initial effort has been to establish a common data set for seismologists to pick. The preliminary studies from this data set have shown that significant bias between authors of catalogs may exist. We provide techniques to ensure that these biases can be identified and correctly managed to provide accurate mergers of earthquake measurements. The overall goal of SPEAR is to provide a repository of information to aid seismologists in comparing and sharing measurements. We want to document in the repository and explore all aspects of the picking process, from the basics of learning how to read a seismogram to complex transformations and enhancements of signals. Your participation in SPEAR will aid the seismological community to close the knowledge gaps that exist in seismogram analysis.

14 CFR 129.20 - Digital flight data recorders.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Digital flight data recorders. 129.20... § 129.20 Digital flight data recorders. No person may operate an aircraft under this part that is... digital method of recording and storing data and a method of readily retrieving that data from the storage...

14 CFR 129.20 - Digital flight data recorders.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Digital flight data recorders. 129.20... § 129.20 Digital flight data recorders. No person may operate an aircraft under this part that is... digital method of recording and storing data and a method of readily retrieving that data from the storage...

The NT digital micro tape recorder

NASA Technical Reports Server (NTRS)

Sasaki, Toshikazu; Alstad, John; Younker, Mike

1993-01-01

The description of an audio recorder may at first glance seem out of place in a conference which has been dedicated to the discussion of the technology and requirements of mass data storage. However, there are several advanced features of the NT system which will be of interest to the mass storage technologist. Moreover, there are a sufficient number of data storage formats in current use which have evolved from their audio counterparts to recommend a close attention to major innovative introductions of audio storage formats. While the existing analog micro-cassette recorder has been (and will continue to be) adequate for various uses, there are significant benefits to be gained through the application of digital technology. The elimination of background tape hiss and the availability of two relatively wide band channels (for stereo recording), for example, would greatly enhance listenability and speech intelligibility. And with the use of advanced high-density recording and LSI circuit technologies, a digital micro recorder can realize unprecedented compactness with excellent energy efficiency. This is what was accomplished with the NT-1 Digital Micro Recorder. Its remarkably compact size contributes to its portability. The high-density NT format enables up to two hours of low-noise digital stereo recording on a cassette the size of a postage stamp. Its highly energy-efficient mechanical and electrical design results in low power consumption; the unit can be operated up to 7 hours (for continuous recording) on a single AA alkaline battery. Advanced user conveniences include a multifunction LCD readout. The unit's compactness and energy-efficiency, in particular, are attributes that cannot be matched by existing analog and digital audio formats. The size, performance, and features of the NT format are of benefit primarily to those who desire improved portability and audio quality in a personal memo product. The NT Recorder is the result of over ten years of

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

Toward 2D Seismic Wavefield Monitoring: Seismic Gradiometry for Long-Period Seismogram and Short-Period Seismogram Envelope applied to the Hi-net Array

NASA Astrophysics Data System (ADS)

Maeda, T.; Nishida, K.; Takagi, R.; Obara, K.

2015-12-01

The high-sensitive seismograph network Japan (Hi-net) operated by National Research Institute for Earth Science and Disaster Prevention (NIED) has about 800 stations with average separation of 20 km. We can observe long-period seismic wave propagation as a 2D wavefield with station separations shorter than wavelength. In contrast, short-period waves are quite incoherent at stations, however, their envelope shapes resemble at neighbor stations. Therefore, we may be able to extract seismic wave energy propagation by seismogram envelope analysis. We attempted to characterize seismic waveform at long-period and its envelope at short-period as 2D wavefield by applying seismic gradiometry. We applied the seismic gradiometry to a synthetic long-period (20-50s) dataset prepared by numerical simulation in realistic 3D medium at the Hi-net station layout. Wave amplitude and its spatial derivatives are estimated by using data at nearby stations. The slowness vector, the radiation pattern and the geometrical spreading are extracted from estimated velocity, displacement and its spatial derivatives. For short-periods at shorter than 1 s, seismogram envelope shows temporal and spatial broadening through scattering by medium heterogeneity. It is expected that envelope shape may be coherent among nearby stations. Based on this idea, we applied the same method to the time-integration of seismogram envelope to estimate its spatial derivatives. Together with seismogram envelope, we succeeded in estimating the slowness vector from the seismogram envelope as well as long-period waveforms by synthetic test, without using phase information. Our preliminarily results show that the seismic gradiometry suits the Hi-net to extract wave propagation characteristics both at long and short periods. This method is appealing that it can estimate waves at homogeneous grid to monitor seismic wave as a wavefield. It is promising to obtain phase velocity variation from direct waves, and to grasp wave

High-density digital recording

NASA Technical Reports Server (NTRS)

Kalil, F. (Editor); Buschman, A. (Editor)

1985-01-01

The problems associated with high-density digital recording (HDDR) are discussed. Five independent users of HDDR systems and their problems, solutions, and insights are provided as guidance for other users of HDDR systems. Various pulse code modulation coding techniques are reviewed. An introduction to error detection and correction head optimization theory and perpendicular recording are provided. Competitive tape recorder manufacturers apply all of the above theories and techniques and present their offerings. The methodology used by the HDDR Users Subcommittee of THIC to evaluate parallel HDDR systems is presented.

14 CFR 129.20 - Digital flight data recorders.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Digital flight data recorders. 129.20... § 129.20 Digital flight data recorders. No person may operate an aircraft under this part that is registered in the United States unless it is equipped with one or more approved flight recorders that use a...

14 CFR 129.20 - Digital flight data recorders.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Digital flight data recorders. 129.20... § 129.20 Digital flight data recorders. No person may operate an aircraft under this part that is registered in the United States unless it is equipped with one or more approved flight recorders that use a...

Mark 3 wideband digital recorder in perspective

NASA Technical Reports Server (NTRS)

Hinteregger, H. F.

1980-01-01

The tape recorder used for the Mark 3 data acquisition and processing system is compared with earlier very long baseline interferometry recorders. Wideband 33-1/3 kbpi digital channel characteristics of instrumentation recorders and of a modern video cassette recorder are illustrated. Factors which influenced selection of the three major commercial components (transport, heads, and tape) are discussed. A brief functional description and the reasons for development of efficient signal electronics and necessary auxiliary control electronics are given. The design and operation of a digital bit synchronizer is illustrated as an example of the high degree of simplicity achieved.

Urban seismology - Northridge aftershocks recorded by multi-scale arrays of portable digital seismographs

USGS Publications Warehouse

Meremonte, M.; Frankel, A.; Cranswick, E.; Carver, D.; Worley, D.

1996-01-01

We deployed portable digital seismographs in the San Fernando Valley (SFV), the Los Angeles basin (LAB), and surrounding hills to record aftershocks of the 17 January 1994 Northridge California earthquake. The purpose of the deployment was to investigate factors relevant to seismic zonation in urban areas, such as site amplification, sedimentary basin effects, and the variability of ground motion over short baselines. We placed seismographs at 47 sites (not all concurrently) and recorded about 290 earthquakes with magnitudes up to 5.1 at five stations or more. We deployed widely spaced stations for profiles across the San Fernando Valley, as well as five dense arrays (apertures of 200 to 500 m) in areas of high damage, such as the collapsed Interstate 10 overpass, Sherman Oaks, and the collapsed parking garage at CalState Northridge. Aftershock data analysis indicates a correlation of site amplification with mainshock damage. We found several cases where the site amplification depended on the azimuth of the aftershock, possibly indicating focusing from basin structures. For the parking garage array, we found large ground-motion variabilities (a factor of 2) over 200-m distances for sites on the same mapped soil unit. Array analysis of the aftershock seismograms demonstrates that sizable arrivals after the direct 5 waves consist of surface waves traveling from the same azimuth as that of the epicenter. These surface waves increase the duration of motions and can have frequencies as high as about 4 Hz. For the events studied here, we do not observe large arrivals reflected from the southern edge of the San Fernando Valley.

Generating Seismograms with Deep Neural Networks

NASA Astrophysics Data System (ADS)

Krischer, L.; Fichtner, A.

2017-12-01

The recent surge of successful uses of deep neural networks in computer vision, speech recognition, and natural language processing, mainly enabled by the availability of fast GPUs and extremely large data sets, is starting to see many applications across all natural sciences. In seismology these are largely confined to classification and discrimination tasks. In this contribution we explore the use of deep neural networks for another class of problems: so called generative models.Generative modelling is a branch of statistics concerned with generating new observed data samples, usually by drawing from some underlying probability distribution. Samples with specific attributes can be generated by conditioning on input variables. In this work we condition on seismic source (mechanism and location) and receiver (location) parameters to generate multi-component seismograms.The deep neural networks are trained on synthetic data calculated with Instaseis (http://instaseis.net, van Driel et al. (2015)) and waveforms from the global ShakeMovie project (http://global.shakemovie.princeton.edu, Tromp et al. (2010)). The underlying radially symmetric or smoothly three dimensional Earth structures result in comparatively small waveform differences from similar events or at close receivers and the networks learn to interpolate between training data samples.Of particular importance is the chosen misfit functional. Generative adversarial networks (Goodfellow et al. (2014)) implement a system in which two networks compete: the generator network creates samples and the discriminator network distinguishes these from the true training examples. Both are trained in an adversarial fashion until the discriminator can no longer distinguish between generated and real samples. We show how this can be applied to seismograms and in particular how it compares to networks trained with more conventional misfit metrics. Last but not least we attempt to shed some light on the black-box nature of

Verification Modal Summation Technique for Synthetic and Observation Seismogram for Pidie Jaya Earthquake M6.5

NASA Astrophysics Data System (ADS)

Irwandi, Irwandi; Fashbir; Daryono

2018-04-01

Neo-Deterministic Seismic Hazard Assessment (NDSHA) method is a seismic hazard assessment method that has an advantage on realistic physical simulation of the source, propagation, and geological-geophysical structure. This simulation is capable on generating the synthetics seismograms at the sites that being observed. At the regional NDSHA scale, calculation of the strong ground motion is based on 1D modal summation technique because it is more efficient in computation. In this article, we verify the result of synthetic seismogram calculations with the result of field observations when Pidie Jaya earthquake on 7 December 2016 occurred with the moment magnitude of M6.5. Those data were recorded by broadband seismometers installed by BMKG (Indonesian Agency for Meteorology, Climatology and Geophysics). The result of the synthetic seismogram calculations verifies that some stations well show the suitability with observation while some other stations show the discrepancies with observation results. Based on the results of the observation of some stations, evidently 1D modal summation technique method has been well verified for thin sediment region (near the pre-tertiary basement), but less suitable for thick sediment region. The reason is that the 1D modal summation technique excludes the amplification effect of seismic wave occurring within thick sediment region. So, another approach is needed, e.g., 2D finite difference hybrid method, which is a part of local scale NDSHA method.

Electronic Health Record Meets Digital Library

PubMed Central

Humphreys, Betsy L.

2000-01-01

Linking the electronic health record to the digital library is a Web-era reformulation of the long-standing informatics goal of seamless integration of automated clinical data and relevant knowledge-based information to support informed decisions. The spread of the Internet, the development of the World Wide Web, and converging format standards for electronic health data and digital publications make effective linking increasingly feasible. Some existing systems link electronic health data and knowledge-based information in limited settings or limited ways. Yet many challenging informatics research problems remain to be solved before flexible and seamless linking becomes a reality and before systems become capable of delivering the specific piece of information needed at the time and place a decision must be made. Connecting the electronic health record to the digital library also requires positive resolution of important policy issues, including health data privacy, government envouragement of high-speed communications, electronic intellectual property rights, and standards for health data and for digital libraries. Both the research problems and the policy issues should be important priorities for the field of medical informatics. PMID:10984463

75 FR 17041 - Extension of the Compliance Date for Cockpit Voice Recorder and Digital Flight Data Recorder...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

...] RIN 2120-AJ65 Extension of the Compliance Date for Cockpit Voice Recorder and Digital Flight Data... March 7, 2008, the FAA published a final rule titled ``Revisions to Cockpit Voice Recorder and Digital... digital flight data recorder equipment on certain aircraft beginning April 7, 2010. That compliance date...

The Spontaneous Ray Log: A New Aid for Constructing Pseudo-Synthetic Seismograms

NASA Astrophysics Data System (ADS)

Quadir, Adnan; Lewis, Charles; Rau, Ruey-Juin

2018-02-01

Conventional synthetic seismograms for hydrocarbon exploration combine the sonic and density logs, whereas pseudo-synthetic seismograms are constructed with a density log plus a resistivity, neutron, gamma ray, or rarely a spontaneous potential log. Herein, we introduce a new technique for constructing a pseudo-synthetic seismogram by combining the gamma ray (GR) and self-potential (SP) logs to produce the spontaneous ray (SR) log. Three wells, each of which consisted of more than 1000 m of carbonates, sandstones, and shales, were investigated; each well was divided into 12 Groups based on formation tops, and the Pearson product-moment correlation coefficient (PCC) was calculated for each "Group" from each of the GR, SP, and SR logs. The highest PCC-valued log curves for each Group were then combined to produce a single log whose values were cross-plotted against the reference well's sonic ITT values to determine a linear transform for producing a pseudo-sonic (PS) log and, ultimately, a pseudo-synthetic seismogram. The range for the Nash-Sutcliffe efficiency (NSE) acceptable value for the pseudo-sonic logs of three wells was 78-83%. This technique was tested on three wells, one of which was used as a blind test well, with satisfactory results. The PCC value between the composite PS (SR) log with low-density correction and the conventional sonic (CS) log was 86%. Because of the common occurrence of spontaneous potential and gamma ray logs in many of the hydrocarbon basins of the world, this inexpensive and straightforward technique could hold significant promise in areas that are in need of alternate ways to create pseudo-synthetic seismograms for seismic reflection interpretation.

An inexpensive digital tape recorder suitable for neurophysiological signals.

PubMed

Lamb, T D

1985-10-01

Modifications are described which convert an inexpensive 'Digital Audio Processor' (Sony PCM-701ES), together with a video cassette recorder, into a high performance digital tape recorder, with two analog channels of 16 bit resolution and DC-20 kHz bandwidth. A further modification is described which optionally provides four additional 1-bit digital channels by sacrificing the least significant four bits of one analog channel. If required two additional high quality analog channels may be obtained by use of one of the new video cassette recorders (such as the Sony SL-HF100) which incorporate a pair of FM tracks.

High speed holographic digital recorder.

PubMed

Roberts, H N; Watkins, J W; Johnson, R H

1974-04-01

Concepts, feasibility experiments, and key component developments are described for a holographic digital record/reproduce system with the potential for 1.0 Gbit/sec rates and higher. Record rates of 500 Mbits/sec have been demonstrated with a ten-channel acoustooptic modulator array and a mode-locked, cavity-dumped argon-ion laser. Acoustooptic device technology has been advanced notably during the development of mode lockers, cavity dumpers, beam deflectors, and multichannel modulator arrays. The development of high speed multichannel photodetector arrays for the readout subsystem requires special attention. The feasibility of 1.0 Gbits/sec record rates has been demonstrated.

Synthetic Seismograms of Explosive Sources Calculated by the Earth Simulator

NASA Astrophysics Data System (ADS)

Tsuboi, S.; Matsumoto, H.; Rozhkov, M.; Stachnik, J.

2017-12-01

We calculate broadband synthetic seismograms using the spectral-element method (Komatitsch & Tromp, 2001) for recent explosive events in northern Korean peninsula. We use supercomputer Earth Simulator system in JAMSTEC to compute synthetic seismograms using the spectral-element method. The simulations are performed on 8,100 processors, which require 2,025 nodes of the Earth Simulator. We use one chunk with the angular distance 40 degrees to compute synthetic seismograms. On this number of nodes, a simulation of 5 minutes of wave propagation accurate at periods of 1.5 seconds and longer requires about 10 hours of CPU time. We use CMT solution of Rozhkov et al (2016) as a source model for this event. One example of CMT solution for this source model has 28% double couple component and 51% isotropic component. The hypocenter depth of this solution is 1.4 km. Comparisons of the synthetic waveforms with the observation show that the arrival time of Pn and Pg waves matches well with the observation. Comparison also shows that the agreement of amplitude of other phases is not necessarily well, which demonstrates that the crustal structure should be improved to include in the simulation. The surface waves observed are also modeled well in the synthetics, which shows that the CMT solution we have used for this computation correctly grasps the source characteristics of this event. Because of characteristics of artificial explosive sources of which hypocenter location is already known, we may evaluate crustal structure along the propagation path from the waveform modeling for these sources. We may discuss the limitation of one dimensional crustal structure model by comparing the synthetic waveform of 3D crustal structure and the observed seismograms.

Usability of ocean-bottom seismograms for broadband waveform tomography

NASA Astrophysics Data System (ADS)

Eibl, Eva P. S.; Sigloch, Karin

2013-04-01

Recordings made by broadband seismometers on the ocean-bottom are generally noisier than recordings of land stations using the same sensor type. The primary reason is that oceanic recordings are more affected by microseismic noise, which originates in the oceans. A similar drawback applies to data from stations on oceanic islands. The frequency band between 0.05 Hz and 0.2 Hz is most affected by microseismic noise -- unfortunately a large overlap with the band that is most useful in highly-resolving body-wave tomography when using land stations. On the other hand, waveform inversion methods, unlike traditional ray theory, do not necessarily depend on the availability of clean, pulse-like broadband signals across the entire frequency range. For example in finite-frequency tomography, the method of our choice, modelling procedures permit the exclusion of unusable frequency bands on a case-by-case basis. Hence we investigate to what extent seismograms from the ocean-bottom and from island stations can be used for broadband waveform inversion of teleseismic P-waves, as compared to continental land stations. We have re-analyzed data from one of the largest onshore-offshore, broadband, long-term seismological experiment to date: the Hawaiian PLUME project (Wolfe et al. 2009, Laske 2009). The data quality was studied in eight overlapping frequency bands (dominant periods between 30.0 s and 2.7 s), for year-long records from 62 ocean-bottom stations (January 2005 - June 2007), complemented by seismograms from 74 regional island stations and 236 continental stations from four different networks on the Pacific-rim, recorded in the same time frame. P-wave seismograms from 103 earthquakes of moment magnitude 6.2 and above, recorded at epicentral distances of 32° to 85° to Hawaii were assessed in this study. The quality of the recorded data was evaluated by calculating the cross-correlation coefficient between the first 1.5 dominant periods of real and predicted waveforms, in

Establishing a gold standard for manual cough counting: video versus digital audio recordings

PubMed Central

Smith, Jaclyn A; Earis, John E; Woodcock, Ashley A

2006-01-01

Background Manual cough counting is time-consuming and laborious; however it is the standard to which automated cough monitoring devices must be compared. We have compared manual cough counting from video recordings with manual cough counting from digital audio recordings. Methods We studied 8 patients with chronic cough, overnight in laboratory conditions (diagnoses were 5 asthma, 1 rhinitis, 1 gastro-oesophageal reflux disease and 1 idiopathic cough). Coughs were recorded simultaneously using a video camera with infrared lighting and digital sound recording. The numbers of coughs in each 8 hour recording were counted manually, by a trained observer, in real time from the video recordings and using audio-editing software from the digital sound recordings. Results The median cough frequency was 17.8 (IQR 5.9–28.7) cough sounds per hour in the video recordings and 17.7 (6.0–29.4) coughs per hour in the digital sound recordings. There was excellent agreement between the video and digital audio cough rates; mean difference of -0.3 coughs per hour (SD ± 0.6), 95% limits of agreement -1.5 to +0.9 coughs per hour. Video recordings had poorer sound quality even in controlled conditions and can only be analysed in real time (8 hours per recording). Digital sound recordings required 2–4 hours of analysis per recording. Conclusion Manual counting of cough sounds from digital audio recordings has excellent agreement with simultaneous video recordings in laboratory conditions. We suggest that ambulatory digital audio recording is therefore ideal for validating future cough monitoring devices, as this as this can be performed in the patients own environment. PMID:16887019

Systems for monitoring and digitally recording water-quality parameters

USGS Publications Warehouse

Smoot, George F.; Blakey, James F.

1966-01-01

Digital recording of water-quality parameters is a link in the automated data collection and processing system of the U.S. Geological Survey. The monitoring and digital recording systems adopted by the Geological Survey, while punching all measurements on a standard paper tape, provide a choice of compatible components to construct a system to meet specific physical problems and data needs. As many as 10 parameters can be recorded by an Instrument, with the only limiting criterion being that measurements are expressed as electrical signals.

Magnified reconstruction of digitally recorded holograms by Fresnel-Bluestein transform.

PubMed

Restrepo, John F; Garcia-Sucerquia, Jorge

2010-11-20

A method for numerical reconstruction of digitally recorded holograms with variable magnification is presented. The proposed strategy allows for smaller, equal, or larger magnification than that achieved with Fresnel transform by introducing the Bluestein substitution into the Fresnel kernel. The magnification is obtained independent of distance, wavelength, and number of pixels, which enables the method to be applied in color digital holography and metrological applications. The approach is supported by experimental and simulation results in digital holography of objects of comparable dimensions with the recording device and in the reconstruction of holograms from digital in-line holographic microscopy.

Image manipulation: Fraudulence in digital dental records: Study and review

PubMed Central

Chowdhry, Aman; Sircar, Keya; Popli, Deepika Bablani; Tandon, Ankita

2014-01-01

Introduction: In present-day times, freely available software allows dentists to tweak their digital records as never before. But, there is a fine line between acceptable enhancements and scientific delinquency. Aims and Objective: To manipulate digital images (used in forensic dentistry) of casts, lip prints, and bite marks in order to highlight tampering techniques and methods of detecting and preventing manipulation of digital images. Materials and Methods: Digital image records of forensic data (casts, lip prints, and bite marks photographed using Samsung Techwin L77 digital camera) were manipulated using freely available software. Results: Fake digital images can be created either by merging two or more digital images, or by altering an existing image. Discussion and Conclusion: Retouched digital images can be used for fraudulent purposes in forensic investigations. However, tools are available to detect such digital frauds, which are extremely difficult to assess visually. Thus, all digital content should mandatorily have attached metadata and preferably watermarking in order to avert their malicious re-use. Also, computer alertness, especially about imaging software's, should be promoted among forensic odontologists/dental professionals. PMID:24696587

Design and development of digital seismic amplifier recorder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samsidar, Siti Alaa; Afuar, Waldy; Handayani, Gunawan, E-mail: gunawanhandayani@gmail.com

2015-04-16

A digital seismic recording is a recording technique of seismic data in digital systems. This method is more convenient because it is more accurate than other methods of seismic recorders. To improve the quality of the results of seismic measurements, the signal needs to be amplified to obtain better subsurface images. The purpose of this study is to improve the accuracy of measurement by amplifying the input signal. We use seismic sensors/geophones with a frequency of 4.5 Hz. The signal is amplified by means of 12 units of non-inverting amplifier. The non-inverting amplifier using IC 741 with the resistor values 1KΩmore » and 1MΩ. The amplification results were 1,000 times. The results of signal amplification converted into digital by using the Analog Digital Converter (ADC). Quantitative analysis in this study was performed using the software Lab VIEW 8.6. The Lab VIEW 8.6 program was used to control the ADC. The results of qualitative analysis showed that the seismic conditioning can produce a large output, so that the data obtained is better than conventional data. This application can be used for geophysical methods that have low input voltage such as microtremor application.« less

Wave Pattern Peculiarities of Different Types of Explosions Conducted at Semipalatinsk Test Site

NASA Astrophysics Data System (ADS)

Sokolova, Inna

2014-05-01

The historical seismograms of the explosions conducted at the STS in 1949 - 1989 are of great interest for the researchers in the field of monitoring. Large number of air (86), surface (30) and underground nuclear explosions were conducted here in boreholes and tunnels (340). In addition to nuclear explosions, large chemical explosions were conducted at the Test Site. It is known that tectonic earthquakes occur on the Test Site territory and near it. Since 2005 the Institute of Geophysical Researches conducts works on digitizing the historical seismograms of nuclear explosions. Currently, the database contains more than 6000 digitized seismograms of nuclear explosions used for investigative monitoring tasks, major part of them (4000) are events from the STS region. Dynamic parameters of records of air, surface and underground nuclear explosions, as well as large chemical explosions with compact charge laying were investigated for seismic stations located on the territory of Kazakhstan using digitized records of the STS events. In addition, the comparison between salvo wave pattern and single explosions was conducted. The records of permanent and temporary seismic stations (epicentral distances range 100 - 800 km) were used for the investigations. Explosions spectra were analyzed, specific features of each class of events were found. The seismograms analysis shows that the wave pattern depends significantly on the explosion site and on the source type.

Synthetic seismograms and spectral cycles on the Andvord and Schollaert Drifts: Antarctic Peninsula

USGS Publications Warehouse

Manley, P.L.; Brachfeld, S.

2007-01-01

(Schollaert Drift) and the mouth of Andvord Bay (Andvord Drift) has been examined using synthetic seismograms. The seismograms generated from the physical properties in jumbo piston cores taken at each of these drifts (28JPC and 18JPC respectively) show good agreement with the field seismic profiles when core disturbance is taken into consideration. Both cores suggest an under-sampling of up to 30% (or compaction) during coring. This leads to inaccuracy in the evaluation of past sedimentation rates and thus interpretations on these rates may be biased.

A high capacity data recording device based on a digital audio processor and a video cassette recorder.

PubMed

Bezanilla, F

1985-03-01

A modified digital audio processor, a video cassette recorder, and some simple added circuitry are assembled into a recording device of high capacity. The unit converts two analog channels into digital form at 44-kHz sampling rate and stores the information in digital form in a common video cassette. Bandwidth of each channel is from direct current to approximately 20 kHz and the dynamic range is close to 90 dB. The total storage capacity in a 3-h video cassette is 2 Gbytes. The information can be retrieved in analog or digital form.

A high capacity data recording device based on a digital audio processor and a video cassette recorder.

PubMed Central

Bezanilla, F

1985-01-01

A modified digital audio processor, a video cassette recorder, and some simple added circuitry are assembled into a recording device of high capacity. The unit converts two analog channels into digital form at 44-kHz sampling rate and stores the information in digital form in a common video cassette. Bandwidth of each channel is from direct current to approximately 20 kHz and the dynamic range is close to 90 dB. The total storage capacity in a 3-h video cassette is 2 Gbytes. The information can be retrieved in analog or digital form. PMID:3978213

Balloon-borne video cassette recorders for digital data storage

NASA Technical Reports Server (NTRS)

Althouse, W. E.; Cook, W. R.

1985-01-01

A high speed, high capacity digital data storage system was developed for a new balloon-borne gamma-ray telescope. The system incorporates economical consumer products: the portable video cassette recorder (VCR) and a relatively newer item - the digital audio processor. The in-flight recording system employs eight VCRs and will provide a continuous data storage rate of 1.4 megabits/sec throughout a 40 hour balloon flight. Data storage capacity is 25 gigabytes and power consumption is only 10 watts.

Filming seismograms and related materials at the California Institute of Technology

NASA Astrophysics Data System (ADS)

Goodstein, Judith R.; Roberts, Paul

As part of the worldwide effort to create an international earthquake data bank, the seismology archive of the California Institute of Technology (Caltech) has been organized, labeled, described, and microfilmed. It includes a wide variety of original records, documents, and printed materials relating to local and distant earthquakes. The single largest and most complex component of the task has been the preparation and microfilming of Caltech's vast collection of original seismograms. The original proposal envisioned a modest project in which a selected number of seismographic records at Caltech could be made more generally available to the scientific community. These single-copy records are stored at Kresge Laboratory and comprise thousands of individual photographic sheets, each 30×92 cm. In the end, we microfilmed both the Pasadena station records and those written at the six original stations in the Caltech network. This task got underway in June 1981 and was completed in January 1985. In the course of the project, the staff sorted, arranged, inventoried, copied, and refiled more than 276,000 records written between January 10, 1923 and December 31, 1962. The microfilm edition of the earthquake records at the Seismological Laboratory at Pasadena and at auxiliary stations at Mount Wilson, Riverside, Santa Barbara, La Jolla, Tinemaha, and Haiwee (the latter two in the Owens Valley) consists of 461 reels of film. The film archive is cataloged and available to researchers in Caltech's Millikan Library in Pasadena, at the U.S. Geological Survey in Menlo Park, Calif, and at the World Data Center (National Oceanic and Atmospheric Administration) in Boulder, Colo.

Balloon-borne video cassette recorders for digital data storage

NASA Technical Reports Server (NTRS)

Althouse, W. E.; Cook, W. R.

1985-01-01

A high-speed, high-capacity digital data storage system has been developed for a new balloon-borne gamma-ray telescope. The system incorporates sophisticated, yet easy to use and economical consumer products: the portable video cassette recorder (VCR) and a relatively newer item - the digital audio processor. The in-flight recording system employs eight VCRs and will provide a continuous data storage rate of 1.4 megabits/sec throughout a 40 hour balloon flight. Data storage capacity is 25 gigabytes and power consumption is only 10 watts.

How Unique is Any Given Seismogram? - Exploring Correlation Methods to Identify Explosions

NASA Astrophysics Data System (ADS)

Walter, W. R.; Dodge, D. A.; Ford, S. R.; Pyle, M. L.; Hauk, T. F.

2015-12-01

As with conventional wisdom about snowflakes, we would expect it unlikely that any two broadband seismograms would ever be exactly identical. However depending upon the resolution of our comparison metric, we do expect, and often find, bandpassed seismograms that correlate to very high levels (>0.99). In fact regional (e.g. Schaff and Richards, 2011) and global investigations (e.g. Dodge and Walter, 2015) find large numbers of highly correlated seismograms. Decreasing computational costs are increasing the tremendous potential for correlation in lowering detection, location and identification thresholds for explosion monitoring (e.g. Schaff et al., 2012, Gibbons and Ringdal, 2012; Zhang and Wen, 2015). We have shown in the case of Source Physics Experiment (SPE) chemical explosions, templates at local and near regional stations can detect, locate and identify very small explosions, which might be applied to monitoring active test sites (Ford and Walter, 2015). In terms of elastic theory, seismograms are the convolution between source and Green function terms. Thus high correlation implies similar sources, closely located. How do we quantify this physically? For example it is well known that as the template event and target events are increasingly separated spatially, their correlation diminishes, as the difference in the Green function between the two events grows larger. This is related to the event separation in terms of wavelength, the heterogeneity of the Earth structure, and the time-bandwidth of the correlation parameters used, but this has not been well quantified. We are using the historic dataset of nuclear explosions in southern Nevada to explore empirically where and how well these events correlate as a function of location, depth, size, time-bandwidth and other parameters. A goal is to develop more meaningful and physical metrics that go beyond the correlation coefficient and can be applied to explosion monitoring problems, particularly event

A hybrid method for the computation of quasi-3D seismograms.

NASA Astrophysics Data System (ADS)

Masson, Yder; Romanowicz, Barbara

2013-04-01

The development of powerful computer clusters and efficient numerical computation methods, such as the Spectral Element Method (SEM) made possible the computation of seismic wave propagation in a heterogeneous 3D earth. However, the cost of theses computations is still problematic for global scale tomography that requires hundreds of such simulations. Part of the ongoing research effort is dedicated to the development of faster modeling methods based on the spectral element method. Capdeville et al. (2002) proposed to couple SEM simulations with normal modes calculation (C-SEM). Nissen-Meyer et al. (2007) used 2D SEM simulations to compute 3D seismograms in a 1D earth model. Thanks to these developments, and for the first time, Lekic et al. (2011) developed a 3D global model of the upper mantle using SEM simulations. At the local and continental scale, adjoint tomography that is using a lot of SEM simulation can be implemented on current computers (Tape, Liu et al. 2009). Due to their smaller size, these models offer higher resolution. They provide us with images of the crust and the upper part of the mantle. In an attempt to teleport such local adjoint tomographic inversions into the deep earth, we are developing a hybrid method where SEM computation are limited to a region of interest within the earth. That region can have an arbitrary shape and size. Outside this region, the seismic wavefield is extrapolated to obtain synthetic data at the Earth's surface. A key feature of the method is the use of a time reversal mirror to inject the wavefield induced by distant seismic source into the region of interest (Robertsson and Chapman 2000). We compute synthetic seismograms as follow: Inside the region of interest, we are using regional spectral element software RegSEM to compute wave propagation in 3D. Outside this region, the wavefield is extrapolated to the surface by convolution with the Green's functions from the mirror to the seismic stations. For now, these

How Do "Wii" Know: Anecdotal Records Go Digital

ERIC Educational Resources Information Center

Bates, C. C.

2013-01-01

Anecdotal records have long been used as a means of formative assessment. This article explores how traditional anecdotal records can be enhanced with digital technology. Using a portable device and one of many available note-taking applications, teachers have the opportunity to create a richer picture of the student. Highlighted in this Teaching…

76 FR 13436 - NIJ Request for Comments on Draft Vehicular Digital Multimedia Evidence Recording System...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

... Comments on Draft Vehicular Digital Multimedia Evidence Recording System Certification Program Requirements for Law Enforcement and Draft Law Enforcement Vehicular Digital Multimedia Evidence Recording System... two draft documents: ``Vehicular Digital Multimedia Evidence Recording System Certification Program...

The May 18, 1998 Indian Nuclear Test Seismograms at station NIL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, W R; Rodgers, A J; Bowers, D

2005-04-11

The last underground nuclear tests were conducted by India and Pakistan in May 1998. Although the Comprehensive Test Ban Treaty has not entered force, an International Monitoring System (IMS), established by the treaty is nearing completion. This system includes 170 seismic stations, a number of them originally established by IRIS. The station IRIS station NIL (Nilore, Pakistan) is close to a planned IMS primary station and recorded some very interesting seismograms from the May 18, 1998 Indian test. We carefully calibrated the path to NIL using a prior Mw 4.4 that occurred on April 4, 1995 about 110 km northmore » of the Indian test site. We used joint epicentral location techniques along with teleseismic P waves and regional surface waves to fix the epicenter, depth, mechanism and moment of this event. From these we obtained a velocity model for the path to NIL and created explosion synthetic seismograms to compare with the data. Interestingly the observed Rayleigh waves are reversed, consistent with an implosion rather than an explosion source. The preferred explanation is that the explosion released tectonic stress near the source region, which can be modeled as a thrust earthquake of approximate Mw 4.0 plus a pure explosion. This tectonic release is sufficient to completely dominate the Rayleigh waves and produce the observed signal (Walter et al. 2005). We also examined the explosion at high frequencies of 6 6-8 Hz where many studies have shown that relative P/S amplitudes can discriminate explosions from a background of earthquakes (Rodgers and Walter, 2002). Comparing with the April 4 1995 earthquake we see the classic difference of relatively large P/S values for the explosion compared to the earthquakes despite the complication of the large tectonic release during the explosion.« less

Golden Oldies: Using Digital Recording to Capture History

ERIC Educational Resources Information Center

Langhorst, Eric

2008-01-01

Analog audio recording has been around for a long time, but today's digital technology makes the process even easier, thanks to inexpensive equipment and free editing software. This year, the author's students at South Valley Junior High in Liberty, Missouri, will embark on an oral history project in which they will record their own family…

Digital Data Recording System (DDRS) operating and maintenance manual

NASA Technical Reports Server (NTRS)

Griffin, C. R.; Jones, J. I.

1980-01-01

The digital data recording system (DDRS) was designed, fabricated, tested, and delivered. This unit is the interface between the synthetic aperture radar (SAR) and the recording system. The SAR data are formatted in the DDRS for data processing on the ground.

Portable digital pressure indicator for calibrating magnetic tape recorders

NASA Technical Reports Server (NTRS)

Mccormick, Royce F.; Leighty, Bradley D.

1989-01-01

The design of a portable Digital Pressure Indicator (DPI) to be used for calibrating the pressure systems on Langley's magnetic tape recorders is described. High-speed magnetic tape recorders require pressure (0 to 20 psig) for providing an air cushion across the tape guides and a slight vacuum (30 inch H2O) for maintaining the proper number of tape loops in the advance and feed chamber. The DPI is a hand-held device that can be quickly coupled to a magnetic tape recorder and includes a two-position switch for selecting either measured pressure or vacuum, to be displayed digitally in engineering units (psig or inches H2O). The DPI is currently in use in Langley's Analysis and Computation Division.

Synthetic Seismogram Calculations for Two-Dimensional Velocity Models.

DTIC Science & Technology

1983-05-20

vertical and radial component displacements. The seismograms have been convolved with a seismograph response function corresponding to a short period...phase velocity is a measure of the degree of numerical dispersion present in the calculation for a variety of grid spacings. The value of 1/G of 0.1...method is an approximate technique and is some what restricted in its application, its efficiency and accuracy make it suitable for routine modeling of

Synthetic seismograms from vibracores: A case study in correlating the late quaternary seismic stratigraphy of the New Jersey inner continental shelf

USGS Publications Warehouse

Esker, D.; Sheridan, R.E.; Ashley, G.M.; Waldner, J.S.; Hall, D.W.

1996-01-01

A new technique, using empirical relationships between median grain size and density and velocity to calculate proxy values for density and velocity, avoids many of the problems associated with the use of well logs and shipboard measurements to construct synthetic seismograms. This method was used to groundtruth and correlate across both analog and digital shallow high-resolution seismic data on the New Jersey shelf. Sampling dry vibracores to determine median grain size eliminates the detrimental effects that coring disturbances and preservation variables have on the sediment and water content of the core. The link between seismic response to lithology and bed spacing is more exact. The exact frequency of the field seismic data can be realistically simulated by a 10-20 cm sampling interval of the vibracores. The estimate of the percentage error inherent in this technique, 12% for acoustic impedance and 24% for reflection amplitude, is calculated to one standard deviation and is within a reasonable limit for such a procedure. The synthetic seismograms of two cores, 4-6 m long, were used to correlate specific sedimentary deposits to specific seismic reflection responses. Because this technique is applicable to unconsolidated sediments, it is ideal for upper Pleistocene and Holocene strata. Copyright ?? 1996, SEPM (Society for Sedimentary Geology).

Speech watermarking: an approach for the forensic analysis of digital telephonic recordings.

PubMed

Faundez-Zanuy, Marcos; Lucena-Molina, Jose J; Hagmüller, Martin

2010-07-01

In this article, the authors discuss the problem of forensic authentication of digital audio recordings. Although forensic audio has been addressed in several articles, the existing approaches are focused on analog magnetic recordings, which are less prevalent because of the large amount of digital recorders available on the market (optical, solid state, hard disks, etc.). An approach based on digital signal processing that consists of spread spectrum techniques for speech watermarking is presented. This approach presents the advantage that the authentication is based on the signal itself rather than the recording format. Thus, it is valid for usual recording devices in police-controlled telephone intercepts. In addition, our proposal allows for the introduction of relevant information such as the recording date and time and all the relevant data (this is not always possible with classical systems). Our experimental results reveal that the speech watermarking procedure does not interfere in a significant way with the posterior forensic speaker identification.

Tuning the Thermochemical Properties of Oxonol Dyes for Digital Versatile Disc Recordable: Reduction of Thermal Interference in High-Speed Recording

NASA Astrophysics Data System (ADS)

Morishima, Shin-Ichi; Wariishi, Koji; Mikoshiba, Hisashi; Inagaki, Yoshio; Shibata, Michihiro; Hashimoto, Hirokazu; Kubo, Hiroshi

To reduce thermal interference between adjacent recording marks on a recordable digital versatile disc, we examined the thermochemical behavior of oxonol dyes for digital versatile disc recordable (DVD-R). We found that oxonol dyes with Meldrum's acid skeleton exhibited an abrupt reduction in weight with increasing temperature without generating excessive heat that is the fundamental cause of thermal interference. DVD-R with the oxonol dyes suppressed fluctuation in the shapes of recorded marks, thereby attaining compatibility with high-speed recording.

Digital methods of recording color television images on film tape

NASA Astrophysics Data System (ADS)

Krivitskaya, R. Y.; Semenov, V. M.

1985-04-01

Three methods are now available for recording color television images on film tape, directly or after appropriate finish of signal processing. Conventional recording of images from the screens of three kinescopes with synthetic crystal face plates is still most effective for high fidelity. This method was improved by digital preprocessing of brightness color-difference signal. Frame-by-frame storage of these signals in the memory in digital form is followed by gamma and aperture correction and electronic correction of crossover distortions in the color layers of the film with fixing in accordance with specific emulsion procedures. The newer method of recording color television images with line arrays of light-emitting diodes involves dichromic superposing mirrors and a movable scanning mirror. This method allows the use of standard movie cameras, simplifies interlacing-to-linewise conversion and the mechanical equipment, and lengthens exposure time while it shortens recording time. The latest image transform method requires an audio-video recorder, a memory disk, a digital computer, and a decoder. The 9-step procedure includes preprocessing the total color television signal with reduction of noise level and time errors, followed by frame frequency conversion and setting the number of lines. The total signal is then resolved into its brightness and color-difference components and phase errors and image blurring are also reduced. After extraction of R,G,B signals and colorimetric matching of TV camera and film tape, the simultaneous R,B, B signals are converted from interlacing to sequential triades of color-quotient frames with linewise scanning at triple frequency. Color-quotient signals are recorded with an electron beam on a smoothly moving black-and-white film tape under vacuum. While digital techniques improve the signal quality and simplify the control of processes, not requiring stabilization of circuits, image processing is still analog.

76 FR 52350 - Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard, Certification Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1564] Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard, Certification Program Requirements, and Selection and... three draft documents related to Vehicular Digital Multimedia Evidence Recording Systems (VDMERSs) used...

Digital recording as a teaching and learning method in the skills laboratory.

PubMed

Strand, Ingebjørg; Gulbrandsen, Lise; Slettebø, Åshild; Nåden, Dagfinn

2017-09-01

To obtain information on how nursing students react to, think about and learn from digital recording as a learning and teaching method over time. Based on the teaching and learning philosophy of the university college, we used digital recording as a tool in our daily sessions in skills laboratory. However, most of the studies referred to in the background review had a duration of from only a few hours to a number of days. We found it valuable to design a study with a duration of two academic semesters. A descriptive and interpretative design was used. First-year bachelor-level students at the department of nursing participated in the study. Data collection was carried out by employing an 'online questionnaire'. The students answered five written, open-ended questions after each of three practical skill sessions. Kvale and Brinkmann's three levels of understanding were employed in the analysis. The students reported that digital recording affected factors such as feeling safe, secure and confident and that video recording was essential in learning and training practical skills. The use of cameras proved to be useful, as an expressive tool for peer learning because video recording enhances self-assessment, reflection, sensing, psychomotor performance and discovery learning. Digital recording enhances the student's awareness when acquiring new knowledge because it activates cognitive and emotional learning. The connection between tutoring, feedback and technology was clear. The digital recorder gives students direct and immediate feedback on their performance from the various practical procedures, and may aid in the transition from theory to practice. Students experienced more self-confidence and a feeling of safety in their performances. © 2016 John Wiley & Sons Ltd.

Digital voice recording: An efficient alternative for data collection

Treesearch

Mark A. Rumble; Thomas M. Juntti; Thomas W. Bonnot; Joshua J. Millspaugh

2009-01-01

Study designs are usually constrained by logistical and budgetary considerations that can affect the depth and breadth of the research. Little attention has been paid to increasing the efficiency of data recording. Digital voice recording and translation may offer improved efficiency of field personnel. Using this technology, we increased our data collection by 55...

A simple derivation of the formula to calculated synthetic long-period seismograms in a heterogeneous Earth by normal mode summation

NASA Technical Reports Server (NTRS)

Tanimoto, T.

1983-01-01

A simple modification of Gilbert's formula to account for slight lateral heterogeneity of the Earth leads to a convenient formula to calculate synthetic long period seismograms. Partial derivatives are easily calculated, thus the formula is suitable for direct inversion of seismograms for lateral heterogeneity of the Earth.

Small-aperture seismic array data processing using a representation of seismograms at zero-crossing points

NASA Astrophysics Data System (ADS)

Brokešová, Johana; Málek, Jiří

2018-07-01

A new method for representing seismograms by using zero-crossing points is described. This method is based on decomposing a seismogram into a set of quasi-harmonic components and, subsequently, on determining the precise zero-crossing times of these components. An analogous approach can be applied to determine extreme points that represent the zero-crossings of the first time derivative of the quasi-harmonics. Such zero-crossing and/or extreme point seismogram representation can be used successfully to reconstruct single-station seismograms, but the main application is to small-aperture array data analysis to which standard methods cannot be applied. The precise times of the zero-crossing and/or extreme points make it possible to determine precise time differences across the array used to retrieve the parameters of a plane wave propagating across the array, namely, its backazimuth and apparent phase velocity along the Earth's surface. The applicability of this method is demonstrated using two synthetic examples. In the real-data example from the Příbram-Háje array in central Bohemia (Czech Republic) for the Mw 6.4 Crete earthquake of October 12, 2013, this method is used to determine the phase velocity dispersion of both Rayleigh and Love waves. The resulting phase velocities are compared with those obtained by employing the seismic plane-wave rotation-to-translation relations. In this approach, the phase velocity is calculated by obtaining the amplitude ratios between the rotation and translation components. Seismic rotations are derived from the array data, for which the small aperture is not only an advantage but also an applicability condition.

Digital Recording and Documentation of Endoscopic Procedures: Do Patients and Doctors Think Alike?

PubMed

Willner, Nadav; Peled-Raz, Maya; Shteinberg, Dan; Shteinberg, Michal; Keren, Dean; Rainis, Tova

2016-01-01

Aims and Methods. Conducting a survey study of a large number of patients and gastroenterologists aimed at identifying relevant predictors of interest in digital recording and documentation (DRD) of endoscopic procedures. Outpatients presenting to the endoscopy unit at our institution for an endoscopy examination were anonymously surveyed, regarding their views and opinions of a possible recording of the procedure. A parallel survey for gastroenterologists was conducted. Results. 417 patients and 62 gastroenterologists participated in two parallel surveys regarding DRD of endoscopic procedures. 66.4% of the patients expressed interest in digital documentation of their endoscopic procedure, with 90.5% of them requesting a copy. 43.6% of the physicians supported digital recording while 27.4% opposed it, with 48.4% opposing to making a copy of the recording available to the patient. No sociodemographic or background factors predicted patient's interest in DRD. 66% of the physicians reported having recording facilities in their institutions, but only 43.6% of them stated performing recording. Having institutional guidelines for DRD was found to be the only significant predictor for routine recording. Conclusions. Our study exposes patients' positive views of digital recording and documentation of endoscopic procedures. In contrast, physicians appear to be much more reluctant towards DRD and are centrally motivated by legal concerns when opposing DRD, as well as when supporting it.

Evaluation of skid test automatic digital recording system.

DOT National Transportation Integrated Search

1974-01-01

The Virginia skid vehicle has been equipped with a digital data recording system to provide rapid reduction of skid measurement data. It was found that five to ten minutes are required to evaluate a single measurement using the original analog strip ...

Constraining the source location of the 30 May 2015 (Mw 7.9) Bonin deep-focus earthquake using seismogram envelopes of high-frequency P waveforms: Occurrence of deep-focus earthquake at the bottom of a subducting slab

NASA Astrophysics Data System (ADS)

Takemura, Shunsuke; Maeda, Takuto; Furumura, Takashi; Obara, Kazushige

2016-05-01

In this study, the source location of the 30 May 2015 (Mw 7.9) deep-focus Bonin earthquake was constrained using P wave seismograms recorded across Japan. We focus on propagation characteristics of high-frequency P wave. Deep-focus intraslab earthquakes typically show spindle-shaped seismogram envelopes with peak delays of several seconds and subsequent long-duration coda waves; however, both the main shock and aftershock of the 2015 Bonin event exhibited pulse-like P wave propagations with high apparent velocities (~12.2 km/s). Such P wave propagation features were reproduced by finite-difference method simulations of seismic wave propagation in the case of slab-bottom source. The pulse-like P wave seismogram envelopes observed from the 2015 Bonin earthquake show that its source was located at the bottom of the Pacific slab at a depth of ~680 km, rather than within its middle or upper regions.

75 FR 14074 - Digital Performance Right in Sound Recordings and Ephemeral Recordings for a New Subscription...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... LIBRARY OF CONGRESS Copyright Royalty Board 37 CFR Part 383 [Docket No. 2009-2 CRB New Subscription II] Digital Performance Right in Sound Recordings and Ephemeral Recordings for a New Subscription Service AGENCY: Copyright Royalty Board, Library of Congress. ACTION: Final rule. SUMMARY: The Copyright...

75 FR 3666 - Digital Performance Right in Sound Recordings and Ephemeral Recordings for a New Subscription...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... LIBRARY OF CONGRESS Copyright Royalty Board 37 CFR Part 383 [Docket No. 2009-2 CRB New Subscription II] Digital Performance Right in Sound Recordings and Ephemeral Recordings for a New Subscription Service AGENCY: Copyright Royalty Board, Library of Congress. ACTION: Proposed rule. SUMMARY: The...

Wavelet transform analysis of transient signals: the seismogram and the electrocardiogram

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anant, K.S.

1997-06-01

In this dissertation I quantitatively demonstrate how the wavelet transform can be an effective mathematical tool for the analysis of transient signals. The two key signal processing applications of the wavelet transform, namely feature identification and representation (i.e., compression), are shown by solving important problems involving the seismogram and the electrocardiogram. The seismic feature identification problem involved locating in time the P and S phase arrivals. Locating these arrivals accurately (particularly the S phase) has been a constant issue in seismic signal processing. In Chapter 3, I show that the wavelet transform can be used to locate both the Pmore » as well as the S phase using only information from single station three-component seismograms. This is accomplished by using the basis function (wave-let) of the wavelet transform as a matching filter and by processing information across scales of the wavelet domain decomposition. The `pick` time results are quite promising as compared to analyst picks. The representation application involved the compression of the electrocardiogram which is a recording of the electrical activity of the heart. Compression of the electrocardiogram is an important problem in biomedical signal processing due to transmission and storage limitations. In Chapter 4, I develop an electrocardiogram compression method that applies vector quantization to the wavelet transform coefficients. The best compression results were obtained by using orthogonal wavelets, due to their ability to represent a signal efficiently. Throughout this thesis the importance of choosing wavelets based on the problem at hand is stressed. In Chapter 5, I introduce a wavelet design method that uses linear prediction in order to design wavelets that are geared to the signal or feature being analyzed. The use of these designed wavelets in a test feature identification application led to positive results. The methods developed in this thesis

Dual function seal: visualized digital signature for electronic medical record systems.

PubMed

Yu, Yao-Chang; Hou, Ting-Wei; Chiang, Tzu-Chiang

2012-10-01

Digital signature is an important cryptography technology to be used to provide integrity and non-repudiation in electronic medical record systems (EMRS) and it is required by law. However, digital signatures normally appear in forms unrecognizable to medical staff, this may reduce the trust from medical staff that is used to the handwritten signatures or seals. Therefore, in this paper we propose a dual function seal to extend user trust from a traditional seal to a digital signature. The proposed dual function seal is a prototype that combines the traditional seal and digital seal. With this prototype, medical personnel are not just can put a seal on paper but also generate a visualized digital signature for electronic medical records. Medical Personnel can then look at the visualized digital signature and directly know which medical personnel generated it, just like with a traditional seal. Discrete wavelet transform (DWT) is used as an image processing method to generate a visualized digital signature, and the peak signal to noise ratio (PSNR) is calculated to verify that distortions of all converted images are beyond human recognition, and the results of our converted images are from 70 dB to 80 dB. The signature recoverability is also tested in this proposed paper to ensure that the visualized digital signature is verifiable. A simulated EMRS is implemented to show how the visualized digital signature can be integrity into EMRS.

Development of Software to Digitize Historic Hardcopy Seismograms from Nuclear Explosions

DTIC Science & Technology

2010-09-01

portion. As will be discussed below, this complicates the preparation of the image for subsequent digitization because background threshold values are...is the output image and  −1 < β ≤ 0 is a user selectable parameter. Global contrast enhancement uses a whitening transform to make a given image

75 FR 78269 - Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard for Law Enforcement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-15

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1538] Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard for Law Enforcement AGENCY: National Institute of... ``Vehicular Digital Multimedia Evidence Recording System Standard for Law Enforcement.'' The opportunity to...

Examining the Effectiveness of Digital Video Recordings on Oral Performance of EFL Learners

ERIC Educational Resources Information Center

Göktürk, Nazlinur

2016-01-01

This study reports the results of an action-based study conducted in an EFL class to examine whether digital video recordings would contribute to the enhancement of EFL learners' oral fluency skills. It also investigates the learners' perceptions of the use of digital video recordings in a speaking class. 10 Turkish EFL learners participated in…

A simple derivation of the formula to calculate synthetic long-period seismograms in a heterogeneous earth by normal mode summation

NASA Technical Reports Server (NTRS)

Tanimoto, T.

1984-01-01

A simple modification of Gilbert's formula to account for slight lateral heterogeneity of the earth leads to a convenient formula to calculate synthetic long period seismograms. Partial derivatives are easily calculated, thus the formula is suitable for direct inversion of seismograms for lateral heterogeneity of the earth. Previously announced in STAR as N83-29893

Travel Vaccines Enter the Digital Age: Creating a Virtual Immunization Record

PubMed Central

Wilson, Kumanan; Atkinson, Katherine M.; Bell, Cameron P.

2016-01-01

At present, proof of immunization against diseases such as yellow fever is required at some international borders in concordance with the International Health Regulations. The current standard, the International Certificate of Vaccination or Prophylaxis (ICVP), has limitations as a paper record including the possibility of being illegible, misplaced, or damaged. We believe that a complementary, digital record would offer advantages to public health and travelers alike. These include enhanced availability and reliability, potential to include lot specific information, and integration with immunization information systems. Challenges exist in implementation, particularly pertaining to verification at border crossings. We describe a potential course for the development and implementation of a digital ICVP record. PMID:26711516

37 CFR 201.28 - Statements of Account for digital audio recording devices or media.

Code of Federal Regulations, 2011 CFR

2011-07-01

... digital audio recording devices or media. 201.28 Section 201.28 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.28 Statements of Account for digital audio recording devices or media. (a) General. This section prescribes rules...

37 CFR 201.28 - Statements of Account for digital audio recording devices or media.

Code of Federal Regulations, 2012 CFR

2012-07-01

... digital audio recording devices or media. 201.28 Section 201.28 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.28 Statements of Account for digital audio recording devices or media. (a) General. This section prescribes rules...

37 CFR 201.28 - Statements of Account for digital audio recording devices or media.

Code of Federal Regulations, 2013 CFR

2013-07-01

... digital audio recording devices or media. 201.28 Section 201.28 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.28 Statements of Account for digital audio recording devices or media. (a) General. This section prescribes rules...

Transitioning from analog to digital audio recording in childhood speech sound disorders.

PubMed

Shriberg, Lawrence D; McSweeny, Jane L; Anderson, Bruce E; Campbell, Thomas F; Chial, Michael R; Green, Jordan R; Hauner, Katherina K; Moore, Christopher A; Rusiewicz, Heather L; Wilson, David L

2005-06-01

Few empirical findings or technical guidelines are available on the current transition from analog to digital audio recording in childhood speech sound disorders. Of particular concern in the present context was whether a transition from analog- to digital-based transcription and coding of prosody and voice features might require re-standardizing a reference database for research in childhood speech sound disorders. Two research transcribers with different levels of experience glossed, transcribed, and prosody-voice coded conversational speech samples from eight children with mild to severe speech disorders of unknown origin. The samples were recorded, stored, and played back using representative analog and digital audio systems. Effect sizes calculated for an array of analog versus digital comparisons ranged from negligible to medium, with a trend for participants' speech competency scores to be slightly lower for samples obtained and transcribed using the digital system. We discuss the implications of these and other findings for research and clinical practise.

Transitioning from analog to digital audio recording in childhood speech sound disorders

PubMed Central

Shriberg, Lawrence D.; McSweeny, Jane L.; Anderson, Bruce E.; Campbell, Thomas F.; Chial, Michael R.; Green, Jordan R.; Hauner, Katherina K.; Moore, Christopher A.; Rusiewicz, Heather L.; Wilson, David L.

2014-01-01

Few empirical findings or technical guidelines are available on the current transition from analog to digital audio recording in childhood speech sound disorders. Of particular concern in the present context was whether a transition from analog- to digital-based transcription and coding of prosody and voice features might require re-standardizing a reference database for research in childhood speech sound disorders. Two research transcribers with different levels of experience glossed, transcribed, and prosody-voice coded conversational speech samples from eight children with mild to severe speech disorders of unknown origin. The samples were recorded, stored, and played back using representative analog and digital audio systems. Effect sizes calculated for an array of analog versus digital comparisons ranged from negligible to medium, with a trend for participants’ speech competency scores to be slightly lower for samples obtained and transcribed using the digital system. We discuss the implications of these and other findings for research and clinical practise. PMID:16019779

37 CFR 201.28 - Statements of Account for digital audio recording devices or media.

Code of Federal Regulations, 2014 CFR

2014-07-01

... digital audio recording devices or media. 201.28 Section 201.28 Patents, Trademarks, and Copyrights U.S. COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.28 Statements of Account for digital audio recording devices or media. (a) General. This section prescribes rules...

A digitally assisted, signal folding neural recording amplifier.

PubMed

Chen, Yi; Basu, Arindam; Liu, Lei; Zou, Xiaodan; Rajkumar, Ramamoorthy; Dawe, Gavin Stewart; Je, Minkyu

2014-08-01

A novel signal folding and reconstruction scheme for neural recording applications that exploits the 1/f(n) characteristics of neural signals is described in this paper. The amplified output is 'folded' into a predefined range of voltages by using comparison and reset circuits along with the core amplifier. After this output signal is digitized and transmitted, a reconstruction algorithm can be applied in the digital domain to recover the amplified signal from the folded waveform. This scheme enables the use of an analog-to-digital convertor with less number of bits for the same effective dynamic range. It also reduces the transmission data rate of the recording chip. Both of these features allow power and area savings at the system level. Other advantages of the proposed topology are increased reliability due to the removal of pseudo-resistors, lower harmonic distortion and low-voltage operation. An analysis of the reconstruction error introduced by this scheme is presented along with a behavioral model to provide a quick estimate of the post reconstruction dynamic range. Measurement results from two different core amplifier designs in 65 nm and 180 nm CMOS processes are presented to prove the generality of the proposed scheme in the neural recording applications. Operating from a 1 V power supply, the amplifier in 180 nm CMOS has a gain of 54.2 dB, bandwidth of 5.7 kHz, input referred noise of 3.8 μVrms and power dissipation of 2.52 μW leading to a NEF of 3.1 in spike band. It exhibits a dynamic range of 66 dB and maximum SNDR of 43 dB in LFP band. It also reduces system level power (by reducing the number of bits in the ADC by 2) as well as data rate to 80% of a conventional design. In vivo measurements validate the ability of this amplifier to simultaneously record spike and LFP signals.

Comparison of 5 types of interocclusal recording materials on the accuracy of articulation of digital models.

PubMed

Sweeney, Sunya; Smith, Derek K; Messersmith, Marion

2015-08-01

One method of articulating digital models is to use a digitized interocclusal record. However, the accuracy of different interocclusal record materials to articulate digital models has yet to be evaluated. A plastic typodont was modified with reference points for interarch measurements and articulated in maximum intercuspal position on a semiadjustable hinge articulator. Twenty-five interocclusal records of each of the 5 experimental materials (Regisil Rigid, Dentsply, York, Pa; Futar Scan, Kettenbach, Huntington Beach, Calif; Byte Right, Motion View Software, Chattanooga, Tenn; Aluwax, Aluwax Dental Products, Allendale, Mich; and Beauty Pink wax, Miltex, York, Pa) were made on the mounted typodont and digitized using an Ortho Insight 3D laser surface scanner (Motion View Software). Motion View Software was used to articulate the digital models by matching points from the models to the digitized interocclusal records. The distances between corresponding interarch markers were measured and compared with the measurements taken on the physical typodont (gold standard). Polyvinyl siloxane materials were significantly more likely to lead to successful articulation than were the other interocclusal record materials. Statistical analysis showed a significant effect of the bite registration material on the probability of success of the articulation (P <0.005). Polyvinyl siloxane is a more accurate interocclusal recording material when articulating digital models according to the process described in this study. Using a bite registration to articulate digital models should be considered the first step in the articulation process, with a likely residual need to manipulate the models manually. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Optimized Global Digital Elevation Data Records (Invited)

NASA Astrophysics Data System (ADS)

Kobrick, M.; Farr, T.; Crippen, R. E.

2009-12-01

The Shuttle Radar Topography Mission (SRTM) used radar interferometry to map the Earth's topography between ±60° latitude - representing 80% of the land surface. The resulting digital elevation models bettered existing topographic data sets (including restricted military data) in accuracy, areal coverage and uniformity by several orders of magnitude, and the resulting data records have found broad application in most of the geosciences, military operations, even Google Earth. Despite their popularity the SRTM data have several limitations, including lack of coverage in polar regions and occasional small voids, or areas of no data in regions of high slope of low radar backscatter. Fortunately additional data sets have become available that, although lacking SRTM's data quality, are sufficient to mitigate many of these limitations. Primary among these is the Global Digital Elevation Model (GDEM) produced from ASTER stereo pairs. The MEaSUREs program is sponsoring an effort to merge these sets to produce and distribute an improved collection of data records that will optimize the topographic data, as well as make available additional non-topographic data products from the SRTM mission. There are four main areas of effort: (1) A systematic program to combine SRTM elevation data with those from other sensors, principally GDEM but also including SPOT stereo, the USGS’s National Elevation Data Set and others, to fill voids in the DEMs according to a prioritized plan, as well as extend the coverage beyond the current 60° latitude limit. (2) Combine the topographic data records with ICESat laser altimeter topography profiles to produce and distribute data records with enhanced ground control. (3) Document the existing SRTM radar image and ancillary data records, as well as generate image mosaics at multiple scales and distribute them via the world wide web. (4) Generate, document and distribute a standard and representative set of SRTM raw radar echo data, along with

Yield and depth Estimation of Selected NTS Nuclear and SPE Chemical Explosions Using Source Equalization by modeling Local and Regional Seismograms (Invited)

NASA Astrophysics Data System (ADS)

Saikia, C. K.; Roman-nieves, J. I.; Woods, M. T.

2013-12-01

Source parameters of nuclear and chemical explosions are often estimated by matching either the corner frequency and spectral level of a single event or the spectral ratio when spectra from two events are available with known source parameters for one. In this study, we propose an alternative method in which waveforms from two or more events can be simultaneously equalized by setting the differential of the processed seismograms at one station from any two individual events to zero. The method involves convolving the equivalent Mueller-Murphy displacement source time function (MMDSTF) of one event with the seismogram of the second event and vice-versa, and then computing their difference seismogram. MMDSTF is computed at the elastic radius including both near and far-field terms. For this method to yield accurate source parameters, an inherent assumption is that green's functions for the any paired events from the source to a receiver are same. In the frequency limit of the seismic data, this is a reasonable assumption and is concluded based on the comparison of green's functions computed for flat-earth models at various source depths ranging from 100m to 1Km. Frequency domain analysis of the initial P wave is, however, sensitive to the depth phase interaction, and if tracked meticulously can help estimating the event depth. We applied this method to the local waveforms recorded from the three SPE shots and precisely determined their yields. These high-frequency seismograms exhibit significant lateral path effects in spectrogram analysis and 3D numerical computations, but the source equalization technique is independent of any variation as long as their instrument characteristics are well preserved. We are currently estimating the uncertainty in the derived source parameters assuming the yields of the SPE shots as unknown. We also collected regional waveforms from 95 NTS explosions at regional stations ALQ, ANMO, CMB, COR, JAS LON, PAS, PFO and RSSD. We are

37 CFR 201.27 - Initial notice of distribution of digital audio recording devices or media.

Code of Federal Regulations, 2013 CFR

2013-07-01

... distribution of digital audio recording devices or media. 201.27 Section 201.27 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.27 Initial notice of distribution of digital audio recording devices or media. (a) General. This section...

37 CFR 201.27 - Initial notice of distribution of digital audio recording devices or media.

Code of Federal Regulations, 2014 CFR

2014-07-01

... distribution of digital audio recording devices or media. 201.27 Section 201.27 Patents, Trademarks, and Copyrights U.S. COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.27 Initial notice of distribution of digital audio recording devices or media. (a) General. This...

37 CFR 201.27 - Initial notice of distribution of digital audio recording devices or media.

Code of Federal Regulations, 2012 CFR

2012-07-01

... distribution of digital audio recording devices or media. 201.27 Section 201.27 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.27 Initial notice of distribution of digital audio recording devices or media. (a) General. This section...

37 CFR 201.27 - Initial notice of distribution of digital audio recording devices or media.

Code of Federal Regulations, 2011 CFR

2011-07-01

... distribution of digital audio recording devices or media. 201.27 Section 201.27 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.27 Initial notice of distribution of digital audio recording devices or media. (a) General. This section...

37 CFR 201.27 - Initial notice of distribution of digital audio recording devices or media.

Code of Federal Regulations, 2010 CFR

2010-07-01

... distribution of digital audio recording devices or media. 201.27 Section 201.27 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES GENERAL PROVISIONS § 201.27 Initial notice of distribution of digital audio recording devices or media. (a) General. This section...

A microcomputer interface for a digital audio processor-based data recording system.

PubMed

Croxton, T L; Stump, S J; Armstrong, W M

1987-10-01

An inexpensive interface is described that performs direct transfer of digitized data from the digital audio processor and video cassette recorder based data acquisition system designed by Bezanilla (1985, Biophys. J., 47:437-441) to an IBM PC/XT microcomputer. The FORTRAN callable software that drives this interface is capable of controlling the video cassette recorder and starting data collection immediately after recognition of a segment of previously collected data. This permits piecewise analysis of long intervals of data that would otherwise exceed the memory capability of the microcomputer.

A microcomputer interface for a digital audio processor-based data recording system.

PubMed Central

Croxton, T L; Stump, S J; Armstrong, W M

1987-01-01

An inexpensive interface is described that performs direct transfer of digitized data from the digital audio processor and video cassette recorder based data acquisition system designed by Bezanilla (1985, Biophys. J., 47:437-441) to an IBM PC/XT microcomputer. The FORTRAN callable software that drives this interface is capable of controlling the video cassette recorder and starting data collection immediately after recognition of a segment of previously collected data. This permits piecewise analysis of long intervals of data that would otherwise exceed the memory capability of the microcomputer. PMID:3676444

The pros and cons about the digital recording of Intangible Cultural Heritage and some strategies

NASA Astrophysics Data System (ADS)

Yang, H.

2015-08-01

Intangible Cultural Heritage (referred to as ICH), whose fundamental nature different from the tangible cultural heritage is "Intangible", and the related physical presence of the heritage is not the core content. Digital means have irreplaceable advantages in recording intangible and dynamic ICH resources, while it also needs flexible and rigorous recording means as a support, thus striving to maximize resources recording and protection. This article will focus on the pros and cons about the digital recording of ICH, and preliminarily discuss some strategies used in the process of recording.

Transitioning from Analog to Digital Audio Recording in Childhood Speech Sound Disorders

ERIC Educational Resources Information Center

Shriberg, Lawrence D.; Mcsweeny, Jane L.; Anderson, Bruce E.; Campbell, Thomas F.; Chial, Michael R.; Green, Jordan R.; Hauner, Katherina K.; Moore, Christopher A.; Rusiewicz, Heather L.; Wilson, David L.

2005-01-01

Few empirical findings or technical guidelines are available on the current transition from analog to digital audio recording in childhood speech sound disorders. Of particular concern in the present context was whether a transition from analog- to digital-based transcription and coding of prosody and voice features might require re-standardizing…

The damping of seismic waves and its determination from reflection seismograms

NASA Technical Reports Server (NTRS)

Engelhard, L.

1979-01-01

The damping in theoretical waveforms is described phenomenologically and a classification is proposed. A method for studying the Earth's crust was developed which includes this damping as derived from reflection seismograms. Seismic wave propagation by absorption, attenuation of seismic waves by scattering, and dispersion relations are considered. Absorption of seismic waves within the Earth as well as reflection and transmission of elastic waves seen through boundary layer absorption are also discussed.

Patients' use of digital audio recordings in four different outpatient clinics.

PubMed

Wolderslund, Maiken; Kofoed, Poul-Erik; Holst, René; Ammentorp, Jette

2015-12-01

To investigate a new technology of digital audio recording (DAR) of health consultations to provide knowledge about patients' use and evaluation of this recording method. A cross-sectional feasibility analysis of the intervention using log data from the recording platform and data from a patient-administered questionnaire. Four different outpatient clinics at a Danish hospital: Paediatrics, Orthopaedics, Internal Medicine and Urology. Two thousand seven hundred and eighty-four outpatients having their consultation audio recorded by one of 49 participating health professionals. DAR of outpatient consultations provided to patients permitting replay of their consultation either alone or together with their relatives. Replay of the consultation within 90 days from the consultation. In the adult outpatient clinics, one in every three consultations was replayed; however, the rates were significantly lower in the paediatric clinic where one in five consultations was replayed. The usage of the audio recordings was positively associated with increasing patient age and first time visits to the clinic. Patient gender influenced replays in different ways; for instance, relatives to male patients replayed recordings more often than relatives to female patients did. Approval of future recordings was high among the patients who replayed the consultation. Patients found that recording health consultations was an important information aid, and the digital recording technology was found to be feasible in routine practice. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

High-speed asynchronous data mulitiplexer/demultiplexer for high-density digital recorders

NASA Astrophysics Data System (ADS)

Berdugo, Albert; Small, Martin B.

1996-11-01

Modern High Density Digital Recorders are ideal devices for the storage of large amounts of digital and/or wideband analog data. Ruggedized versions of these recorders are currently available and are supporting many military and commercial flight test applications. However, in certain cases, the storage format becomes very critical, e.g., when a large number of data types are involved, or when channel- to-channel correlation is critical, or when the original data source must be accurately recreated during post mission analysis. A properly designed storage format will not only preserve data quality, but will yield the maximum storage capacity and record time for any given recorder family or data type. This paper describes a multiplex/demultiplex technique that formats multiple high speed data sources into a single, common format for recording. The method is compatible with many popular commercial recorder standards such as DCRsi, VLDS, and DLT. Types of input data typically include PCM, wideband analog data, video, aircraft data buses, avionics, voice, time code, and many others. The described method preserves tight data correlation with minimal data overhead. The described technique supports full reconstruction of the original input signals during data playback. Output data correlation across channels is preserved for all types of data inputs. Simultaneous real- time data recording and reconstruction are also supported.

Analog-to-digital conversion as a source of drifts in displacements derived from digital recordings of ground acceleration

USGS Publications Warehouse

Boore, D.M.

2003-01-01

Displacements obtained from double integration of digitally recorded ground accelerations often show drifts much larger than those expected for the true ground displacements. These drifts might be due to many things, including dynamic elastic ground tilt, inelastic ground deformation, hysteresis in the instruments, and cross feed due to misalignment of nominally orthogonal sensors. This article shows that even if those effects were not present, the analog-to-digital conversion (ADC) process can produce apparent "pulses" and offsets in the acceleration baseline if the ground motion is slowly varying compared with the quantization level of the digitization. Such slowly varying signals can be produced by constant offsets that do not coincide with a quantization level and by near- and intermediate-field terms in the wave field radiated from earthquakes. Double integration of these apparent pulses and offsets leads to drifts in the displacements similar to those found in processing real recordings. These effects decrease in importance as the resolution of the ADC process increases.

The need of inhomogeneous models to explain the seismograms of 2 explosions

NASA Astrophysics Data System (ADS)

Marcellini, A.; Tento, A.; Daminelli, R.

2010-12-01

On November 23, 2003 and May 20, 2007 two 500 kg bombs from the 2nd World War were exploded in an open quarry close to Milan. Velocimetric registrations at 2.5 km and 1.4 km from the epicentre for the 2003 and 2007 explosions respectively, showed a nearly monochromatic P-wave train with an approximate frequency of 10 Hz for both explosions and an elliptical prograde motion. The maximum P-wave amplitude, recorded on the vertical component of the 2003 explosion, was 125 10-6 m/sec. The PGV was slightly less than the record of the 2007 explosion, despite the lower epicentral distance. Both the stations were situated in a quaternary deposit. We were not able to model the unusual readings using ordinary synthetic seismogram techniques, instead we found that the inhomogeneous wave propagation model (Borcherdt, 2009) fitted quite well for these results. The analysis showed that a moderate variation of QP didn't significantly change the tilt angle (between the propagation vector P and the ellipse of motion major axis). Also the difference between homogeneous and inhomogeneous P wave velocity was not notable, but the QP variation had a strong implication on the degree of inhomogeneity. The γ angle (between P vector and the attenuation vector A) reached γ =76° for QP=20 and 58° for QP=8. Borcherdt, R.D. (2009). Viscoelastic waves in layered media. Cambridge University Press, pp.305.

Going digital: a checklist in preparing for hospital-wide electronic medical record implementation and digital transformation.

PubMed

Scott, Ian A; Sullivan, Clair; Staib, Andrew

2018-05-24

Objective In an era of rapid digitisation of Australian hospitals, practical guidance is needed in how to successfully implement electronic medical records (EMRs) as both a technical innovation and a major transformative change in clinical care. The aim of the present study was to develop a checklist that clearly and comprehensively defines the steps that best prepare hospitals for EMR implementation and digital transformation. Methods The checklist was developed using a formal methodological framework comprised of: literature reviews of relevant issues; an interactive workshop involving a multidisciplinary group of digital leads from Queensland hospitals; a draft document based on literature and workshop proceedings; and a review and feedback from senior clinical leads. Results The final checklist comprised 19 questions, 13 related to EMR implementation and six to digital transformation. Questions related to the former included organisational considerations (leadership, governance, change leaders, implementation plan), technical considerations (vendor choice, information technology and project management teams, system and hardware alignment with clinician workflows, interoperability with legacy systems) and training (user training, post-go-live contingency plans, roll-out sequence, staff support at point of care). Questions related to digital transformation included cultural considerations (clinically focused vision statement and communication strategy, readiness for change surveys), management of digital disruption syndromes and plans for further improvement in patient care (post-go-live optimisation of digital system, quality and benefit evaluation, ongoing digital innovation). Conclusion This evidence-based, field-tested checklist provides guidance to hospitals planning EMR implementation and separates readiness for EMR from readiness for digital transformation. What is known about the topic? Many hospitals throughout Australia have implemented, or are planning

76 FR 27355 - Law Enforcement Vehicular Digital Multimedia Evidence Recording System Selection and Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1553] Law Enforcement Vehicular Digital Multimedia Evidence Recording System Selection and Application Guide AGENCY: National... of Justice (NIJ) will make available, to the general public, the ``Law Enforcement Vehicular Digital...

A solid-state digital temperature recorder for space use

NASA Technical Reports Server (NTRS)

Westbrook, R. M.; Bennett, L. D.; Steinhaver, R. A.; Deboo, G. J.

1981-01-01

A solid-state, digital, temperature recorder has been developed for use in space experiments. The recorder is completely self-contained and includes a temperature sensor; all necessary electronics for signal conditioning, processing, storing, control and timing; and a battery power supply. No electrical interfacing with the particular spacecraft on which the unit is used is required. The recorder is small, light, and sturdy, and has no moving parts. It uses only biocompatible materials and has passed vibration and shock spaceflight qualification tests. The unit is capable of storing 2048, -10 to +45 C, 8-bit temperature measurements taken at intervals selectable by factors of 2 from 1.875 to 240 min; data can be retained for at least 6 months. The basic recorder can be simplified to accommodate a variety of applications by adding memory to allow more data to be recorded, by changing the front end to permit measurements other than temperature to be made, and by using different batteries to realize various operating periods. Stored flight data are read out from the recorder by means of a ground read-out unit.

Deep-turbulence wavefront sensing using digital holography in the on-axis phase shifting recording geometry

NASA Astrophysics Data System (ADS)

Thornton, Douglas E.; Spencer, Mark F.; Perram, Glen P.

2017-09-01

The effects of deep turbulence in long-range imaging applications presents unique challenges to properly measure and correct for aberrations incurred along the atmospheric path. In practice, digital holography can detect the path-integrated wavefront distortions caused by deep turbulence, and di erent recording geometries offer different benefits depending on the application of interest. Previous studies have evaluated the performance of the off-axis image and pupil plane recording geometries for deep-turbulence sensing. This study models digital holography in the on-axis phase shifting recording geometry using wave optics simulations. In particular, the analysis models spherical-wave propagation through varying deep-turbulence conditions to estimate the complex optical field, and performance is evaluated by calculating the field-estimated Strehl ratio and RMS wavefront error. Altogether, the results show that digital holography in the on-axis phase shifting recording geometry is an effective wavefront-sensing method in the presence of deep turbulence.

Noise Source Visualization Using a Digital Voice Recorder and Low-Cost Sensors

PubMed Central

Cho, Yong Thung

2018-01-01

Accurate sound visualization of noise sources is required for optimal noise control. Typically, noise measurement systems require microphones, an analog-digital converter, cables, a data acquisition system, etc., which may not be affordable for potential users. Also, many such systems are not highly portable and may not be convenient for travel. Handheld personal electronic devices such as smartphones and digital voice recorders with relatively lower costs and higher performance have become widely available recently. Even though such devices are highly portable, directly implementing them for noise measurement may lead to erroneous results since such equipment was originally designed for voice recording. In this study, external microphones were connected to a digital voice recorder to conduct measurements and the input received was processed for noise visualization. In this way, a low cost, compact sound visualization system was designed and introduced to visualize two actual noise sources for verification with different characteristics: an enclosed loud speaker and a small air compressor. Reasonable accuracy of noise visualization for these two sources was shown over a relatively wide frequency range. This very affordable and compact sound visualization system can be used for many actual noise visualization applications in addition to educational purposes. PMID:29614038

Study on key techniques for camera-based hydrological record image digitization

NASA Astrophysics Data System (ADS)

Li, Shijin; Zhan, Di; Hu, Jinlong; Gao, Xiangtao; Bo, Ping

2015-10-01

With the development of information technology, the digitization of scientific or engineering drawings has received more and more attention. In hydrology, meteorology, medicine and mining industry, the grid drawing sheet is commonly used to record the observations from sensors. However, these paper drawings may be destroyed and contaminated due to improper preservation or overuse. Further, it will be a heavy workload and prone to error if these data are manually transcripted into the computer. Hence, in order to digitize these drawings, establishing the corresponding data base will ensure the integrity of data and provide invaluable information for further research. This paper presents an automatic system for hydrological record image digitization, which consists of three key techniques, i.e., image segmentation, intersection point localization and distortion rectification. First, a novel approach to the binarization of the curves and grids in the water level sheet image has been proposed, which is based on the fusion of gradient and color information adaptively. Second, a fast search strategy for cross point location is invented and point-by-point processing is thus avoided, with the help of grid distribution information. And finally, we put forward a local rectification method through analyzing the central portions of the image and utilizing the domain knowledge of hydrology. The processing speed is accelerated, while the accuracy is still satisfying. Experiments on several real water level records show that our proposed techniques are effective and capable of recovering the hydrological observations accurately.

Validation of a digital audio recording method for the objective assessment of cough in the horse.

PubMed

Duz, M; Whittaker, A G; Love, S; Parkin, T D H; Hughes, K J

2010-10-01

To validate the use of digital audio recording and analysis for quantification of coughing in horses. Part A: Nine simultaneous digital audio and video recordings were collected individually from seven stabled horses over a 1 h period using a digital audio recorder attached to the halter. Audio files were analysed using audio analysis software. Video and audio recordings were analysed for cough count and timing by two blinded operators on two occasions using a randomised study design for determination of intra-operator and inter-operator agreement. Part B: Seventy-eight hours of audio recordings obtained from nine horses were analysed once by two blinded operators to assess inter-operator repeatability on a larger sample. Part A: There was complete agreement between audio and video analyses and inter- and intra-operator analyses. Part B: There was >97% agreement between operators on number and timing of 727 coughs recorded over 78 h. The results of this study suggest that the cough monitor methodology used has excellent sensitivity and specificity for the objective assessment of cough in horses and intra- and inter-operator variability of recorded coughs is minimal. Crown Copyright 2010. Published by Elsevier India Pvt Ltd. All rights reserved.

Measuring the misfit between seismograms using an optimal transport distance: application to full waveform inversion

NASA Astrophysics Data System (ADS)

Métivier, L.; Brossier, R.; Mérigot, Q.; Oudet, E.; Virieux, J.

2016-04-01

Full waveform inversion using the conventional L2 distance to measure the misfit between seismograms is known to suffer from cycle skipping. An alternative strategy is proposed in this study, based on a measure of the misfit computed with an optimal transport distance. This measure allows to account for the lateral coherency of events within the seismograms, instead of considering each seismic trace independently, as is done generally in full waveform inversion. The computation of this optimal transport distance relies on a particular mathematical formulation allowing for the non-conservation of the total energy between seismograms. The numerical solution of the optimal transport problem is performed using proximal splitting techniques. Three synthetic case studies are investigated using this strategy: the Marmousi 2 model, the BP 2004 salt model, and the Chevron 2014 benchmark data. The results emphasize interesting properties of the optimal transport distance. The associated misfit function is less prone to cycle skipping. A workflow is designed to reconstruct accurately the salt structures in the BP 2004 model, starting from an initial model containing no information about these structures. A high-resolution P-wave velocity estimation is built from the Chevron 2014 benchmark data, following a frequency continuation strategy. This estimation explains accurately the data. Using the same workflow, full waveform inversion based on the L2 distance converges towards a local minimum. These results yield encouraging perspectives regarding the use of the optimal transport distance for full waveform inversion: the sensitivity to the accuracy of the initial model is reduced, the reconstruction of complex salt structure is made possible, the method is robust to noise, and the interpretation of seismic data dominated by reflections is enhanced.

Data recording and playback on video tape--a multi-channel analog interface for a digital audio processor system.

PubMed

Blaettler, M; Bruegger, A; Forster, I C; Lehareinger, Y

1988-03-01

The design of an analog interface to a digital audio signal processor (DASP)-video cassette recorder (VCR) system is described. The complete system represents a low-cost alternative to both FM instrumentation tape recorders and multi-channel chart recorders. The interface or DASP input-output unit described in this paper enables the recording and playback of up to 12 analog channels with a maximum of 12 bit resolution and a bandwidth of 2 kHz per channel. Internal control and timing in the recording component of the interface is performed using ROMs which can be reprogrammed to suit different analog-to-digital converter hardware. Improvement in the bandwidth specifications is possible by connecting channels in parallel. A parallel 16 bit data output port is provided for direct transfer of the digitized data to a computer.

Public Sector Readiness for Digital Preservation in New Zealand: The Rate of Adoption of an Innovation in Records Management Practices

ERIC Educational Resources Information Center

Dorner, Daniel G.

2009-01-01

Recent legislation in New Zealand has placed statutory obligations on its government organizations to introduce sound records management practices and to ensure long-term access to their digital records. To obtain a base level of knowledge on current digital preservation practices and on awareness of digital preservation issues, an online survey…

New Recording Layer of Recordable Digital Versatile Disc with CrOx Film Using Red Laser

NASA Astrophysics Data System (ADS)

Liu, Chung Ping; Hung, Yao Ti

2006-03-01

In this study, CrOx film deposited by rf magnetron reactive sputtering was used as a new recording layer for a recordable digital versatile disc (DVD-R) with a red laser. X-ray photoelectron spectroscopy (XPS) indicated the films have three major components: CrO2, CrO3, and Cr2O3. From disc dynamic tests and atomic force microscope (AFM) images of a polycarbonate (PC) substrate, a DVD-R structure of PC/ZnS-SiO2 (30 nm)/CrOx (120 nm)/ZnS-SiO2 (40 nm)/Ag (50 nm), deposited by sputtering at an O2/Ar flow rate ratio of 0.4, had an improved carrier-to-noise ratio (CNR). The principle of recording depends primarily on the explosive pressure of the O2 released due to laser heating of the annealed CrOx film.

Electronic health record meets digital library: a new environment for achieving an old goal.

PubMed

Humphreys, B L

2000-01-01

Linking the electronic health record to the digital library is a Web-era reformulation of the long-standing informatics goal of seamless integration of automated clinical data and relevant knowledge-based information to support informed decisions. The spread of the Internet, the development of the World Wide Web, and converging format standards for electronic health data and digital publications make effective linking increasingly feasible. Some existing systems link electronic health data and knowledge-based information in limited settings or limited ways. Yet many challenging informatics research problems remain to be solved before flexible and seamless linking becomes a reality and before systems become capable of delivering the specific piece of information needed at the time and place a decision must be made. Connecting the electronic health record to the digital library also requires positive resolution of important policy issues, including health data privacy, government encouragement of high-speed communications, electronic intellectual property rights, and standards for health data and for digital libraries. Both the research problems and the policy issues should be important priorities for the field of medical informatics.

An iPad and Android-based Application for Digitally Recording Geologic Field Data

NASA Astrophysics Data System (ADS)

Malinconico, L. L.; Sunderlin, D.; Liew, C.; Ho, A. S.; Bekele, K. A.

2011-12-01

Field experience is a significant component in most geology courses, especially sed/strat and structural geology. Increasingly, the spatial presentation, analysis and interpretation of geologic data is done using digital methodologies (GIS, Google Earth, stereonet and spreadsheet programs). However, students and professionals continue to collect field data manually on paper maps and in the traditional "orange field notebooks". Upon returning from the field, data are then manually transferred into digital formats for processing, mapping and interpretation. The transfer process is both cumbersome and prone to transcription error. In conjunction with the computer science department, we are in the process of developing an application (App) for iOS (the iPad) and Android platforms that can be used to digitally record data measured in the field. This is not a mapping program, but rather a way of bypassing the field book step to acquire digital data directly that can then be used in various analysis and display programs. Currently, the application allows the user to select from five different structural data situations: contact, bedding, fault, joints and "other". The user can define a folder for the collection and separation of data for each project. Observations are stored as individual records of field measurements in each folder. The exact information gathered depends on the nature of the observation, but common to all pages is the ability to log date, time, and lat/long directly from the tablet. Information like strike and dip are entered using scroll wheels and formation names are also entered using scroll wheels that access easy-to-modify lists of the area's stratigraphic units. This insures uniformity in the creation of the digital records from day-to-day and across field teams. Pictures can also be taken using the tablet's camera that are linked to each record. Once the field collection is complete the data (including images) can be easily exported to a .csv file

Digital radiography and electronic data storage from the perspective of legal requirements for record keeping.

PubMed

Figgener, L; Runte, C

2003-12-01

In some countries physicians and dentists are required by law to keep medical and dental records. These records not only serve as personal notes and memory aids but have to be in accordance with the necessary standard of care and may be used as evidence in litigation. Inadequate, incomplete or even missing records can lead to reversal of the burden of proof, resulting in a dramatically reduced chance of successful defence in litigation. The introduction of digital radiography and electronic data storage presents a new problem with respect to legal evidence, since digital data can easily be manipulated and industry is now required to provide adequate measures to prevent manipulations and forgery.

Analytical computation of three-dimensional synthetic seismograms by Modal Summation: method, validation and applications

NASA Astrophysics Data System (ADS)

La Mura, Cristina; Gholami, Vahid; Panza, Giuliano F.

2013-04-01

In order to enable realistic and reliable earthquake hazard assessment and reliable estimation of the ground motion response to an earthquake, three-dimensional velocity models have to be considered. The propagation of seismic waves in complex laterally varying 3D layered structures is a complicated process. Analytical solutions of the elastodynamic equations for such types of media are not known. The most common approaches to the formal description of seismic wavefields in such complex structures are methods based on direct numerical solutions of the elastodynamic equations, e.g. finite-difference, finite-element method, and approximate asymptotic methods. In this work, we present an innovative methodology for computing synthetic seismograms, complete of the main direct, refracted, converted phases and surface waves in three-dimensional anelastic models based on the combination of the Modal Summation technique with the Asymptotic Ray Theory in the framework of the WKBJ - approximation. The three - dimensional models are constructed using a set of vertically heterogeneous sections (1D structures) that are juxtaposed on a regular grid. The distribution of these sections in the grid is done in such a way to fulfill the requirement of weak lateral inhomogeneity in order to satisfy the condition of applicability of the WKBJ - approximation, i.e. the lateral gradient of the parameters characterizing the 1D structure has to be small with respect to the prevailing wavelength. The new method has been validated comparing synthetic seismograms with the records available of three different earthquakes in three different regions: Kanto basin (Japan) triggered by the 1990 Odawara earthquake Mw= 5.1, Romanian territory triggered by the 30 May 1990 Vrancea intermediate-depth earthquake Mw= 6.9 and Iranian territory affected by the 26 December 2003 Bam earthquake Mw= 6.6. Besides the advantage of being a useful tool for assessment of seismic hazard and seismic risk reduction, it

Coal-seismic, desktop computer programs in BASIC; Part 7, Display and compute shear-pair seismograms

USGS Publications Warehouse

Hasbrouck, W.P.

1983-01-01

Processing of geophysical data taken with the U.S. Geological Survey's coal-seismic system is done with a desk-top, stand-alone computer. Programs for this computer are written in the extended BASIC language utilized by the Tektronix 4051 Graphic System. This report discusses and presents five computer pro grams used to display and compute shear-pair seismograms.

The average direct current offset values for small digital audio recorders in an acoustically consistent environment.

PubMed

Koenig, Bruce E; Lacey, Douglas S

2014-07-01

In this research project, nine small digital audio recorders were tested using five sets of 30-min recordings at all available recording modes, with consistent audio material, identical source and microphone locations, and identical acoustic environments. The averaged direct current (DC) offset values and standard deviations were measured for 30-sec and 1-, 2-, 3-, 6-, 10-, 15-, and 30-min segments. The research found an inverse association between segment lengths and the standard deviation values and that lengths beyond 30 min may not meaningfully reduce the standard deviation values. This research supports previous studies indicating that measured averaged DC offsets should only be used for exclusionary purposes in authenticity analyses and exhibit consistent values when the general acoustic environment and microphone/recorder configurations were held constant. Measured average DC offset values from exemplar recorders may not be directly comparable to those of submitted digital audio recordings without exactly duplicating the acoustic environment and microphone/recorder configurations. © 2014 American Academy of Forensic Sciences.

A major upgrade of the sediment echosounder ATLAS PARASOUND and the digital acquisition software ParaDigMA for high-resolution sea floor studies

NASA Astrophysics Data System (ADS)

Gerriets, A.; von Lom-Keil, H.; Spiess, V.; Zwanzig, C.; Bruns, R.

2003-04-01

The combination of the ATLAS PARASOUND sediment echosounder, designed by ATLAS Hydrographic, and the digital recording software package ParaDigMA (commercially available as ATLAS PARASTORE-3) for online digitisation, preprocessing and visualisation of recorded seismograms has proven to be a reliable system for high-resolution acoustic sea floor studies. During 10 years of successful operation aboard several research vessels, including R/V Meteor, R/V Sonne and R/V Polarstern, the system has been only slightly modified. Based on this experience, today's PARASOUND/ParaDigMA system has accomplished the step from DOS towards Windows platform and network capability. In cooperation of ATLAS Hydrographic and the Department of Earth Sciences, University of Bremen a major upgrade of the PARASOUND/ParaDigMA system has been developed that adds significant functionality for surveys of sediment structures and sea floor morphology. The innovations primarily concern the control section of the ATLAS PARASOUND echosounder and the ParaDigMA user front end. The previous analogue PARASOUND control terminal has been replaced by a small real time control PC responsible for the control of the echosounder as well as for the continuous digitisation of the data. The control PC communicates via standard network protocols metadata and data with client applications that can display and store the acquired data on different computers on the network. The new network capabilities of the system overcome former limitations and admit a high flexibility with respect to numbers and locations of operator and recording/display PCs. The system now offers a simultaneous parallel registration of the 2.5-5.5kHz parametric signal and the 18kHz NBS signal. This feature in combination with the recording of complete soundings including the entire water column provides the basis for evolving scientific research topics e. g. gas venting. The ParaDigMA recording software now operates on Windows platforms which

Synthetic Seismograms Derived from Oceanographic Data in the Campeche Canyon, Deepwater Gulf of Mexico

NASA Astrophysics Data System (ADS)

Gonzalez-Orduno, A.; Fucugauchi, J. U.; Monreal, M.; Perez-Cruz, G.; Salas de León, D. A.

2013-05-01

The seismic reflection method has been successfully applied worldwide to investigate subsurface conditions to support important business decisions in the oil industry. When applied in the marine environment, useful reflection information is limited to events on and below the sea floor; Information from the water column, if any, is disregarded. Seismic oceanography is emerging as a new technique that utilize the reflection information within the water column to infer thermal-density contrasts associated with oceanographic processes, such as cyclonic-anticyclonic eddies, ascending-descending water flows, and water flows related to rapid topographic changes on the sea floor. A seismic investigation to infer such oceanographic changes in one sector of the Campeche Canyon is in progress as a research matter at the Instituto de Ciencias del Mar y Limnologia from the University of Mexico (UNAM). First steps of the investigation consisted of creating synthetic seismograms based on oceanographic information (temperature and density) derived from direct observation on a series of close spaced depth points along vertical profiles. Details of the selected algorithms used for the transformation of the oceanographic data to acoustic impedances data sets and further construction of synthetic seismograms on each site and their representation as synthetic seismic sections, are presented in this work, as well as the road ahead in the investigation.

High-frequency observations and source parameters of microearthquakes recorded at hard-rock sites

USGS Publications Warehouse

Cranswick, Edward; Wetmiller, Robert; Boatwright, John

1985-01-01

We have estimated the source parameters of 53 microearthquakes recorded in July 1983 which were aftershocks of the Miramichi, New Brunswick, earthquake that occurred on 9 January 1982. These events were recorded by local three-component digital seismographs at 400 sps/component from 2-Hz velocity transducers sited directly on glacially scoured crystalline basement outcrop. Hypocentral distances are typically less than 5 km, and the hypocenters and the seven digital seismograph stations established all lie essentially within the boundaries of a granitic pluton that encompasses the faults that ruptured during the main shock and major aftershocks. The P-wave velocity is typically 5 km/sec at the surface and at least 6 km/sec at depths greater than about 1 km.The events have S-wave corner frequencies in the band 10 to 40 Hz, and the calculated Brune model seismic moments range from 1015 to 1018 dyne-cm. The corresponding stress drops are generally less than 1.0 bars, but there is considerable evidence that the seismic-source signals have been modified by propagation and/or site-effects. The data indicate: (a) there is a velocity discontinuity at 0.5 km depth; (b) the top layer has strong scattering/attenuating properties; (c) some source-receiver paths differentiate the propagated signal; (d) there is a hard-rock-site P-wave “fmax” between 50 and 100 Hz; and (e) some hard-rock sites are characterized by P-wave resonance frequencies in the range 50 to 100 Hz. Comparison of this dataset with the January 1982 New Brunswick digital seismograms which were recorded at sites underlain by several meters of low-velocity surface sediments suggests that some of the hard-rock-site phenomena listed above can be explained in terms of a layer-over-a-half-space model. For microearthquakes, this result implies that spectrally determined source dimension scales with site dimension (thickness of the layer). More generally, it emphasizes that it is very difficult to accurately observe

Core Angular Momentum and the IERS Sub-Centers Activity for Monitoring Global Geophysical Fluids. Part 1; Core Angular Momentum and Earth Rotation

NASA Technical Reports Server (NTRS)

Song, Xia-Dong; Chao, Benjamin (Technical Monitor)

1999-01-01

The part of the grant was to use recordings of seismic waves travelling through the earth's core (PKP waves) to study the inner core rotation and constraints on possible density anomalies in the fluid core. The shapes and relative arrival times of such waves associated with a common source were used to reduce the uncertainties in source location and excitation and the effect of unknown mantle structure. The major effort of the project is to assemble historical seismograms with long observing base lines. We have found original paper records of SSI earthquakes at COL between 1951 and 1966 in a warehouse of the U.S. Geological Survey office in Golden, Colorado, extending the previous measurements at COL by Song and Richards [1996] further back 15 years. Also in Alaska, the University of Alaska, Fairbanks Geophysical Institute (UAFGI) has been operating the Alaskan Seismic Network with over 100 stations since the late 1960s. Virtually complete archives of seismograms are still available at UAFGI. Unfortunately, most of the archives are in microchip form (develocorders), for which the use of waveforms is impossible. Paper seismograms (helicorders) are available for a limited number of stations, and digital recordings of analog signals started around 1989. Of the paper records obtained, stations at Gilmore Dome (GLM, very close to COL), Yukon (FYU), McKinley (MCK), and Sheep Creek Mountain (SCM) have the most complete continuous recordings.

Interferenceless coded aperture correlation holography-a new technique for recording incoherent digital holograms without two-wave interference.

PubMed

Vijayakumar, A; Rosen, Joseph

2017-06-12

Recording digital holograms without wave interference simplifies the optical systems, increases their power efficiency and avoids complicated aligning procedures. We propose and demonstrate a new technique of digital hologram acquisition without two-wave interference. Incoherent light emitted from an object propagates through a random-like coded phase mask and recorded directly without interference by a digital camera. In the training stage of the system, a point spread hologram (PSH) is first recorded by modulating the light diffracted from a point object by the coded phase masks. At least two different masks should be used to record two different intensity distributions at all possible axial locations. The various recorded patterns at every axial location are superposed in the computer to obtain a complex valued PSH library cataloged to its axial location. Following the training stage, an object is placed within the axial boundaries of the PSH library and the light diffracted from the object is once again modulated by the same phase masks. The intensity patterns are recorded and superposed exactly as the PSH to yield a complex hologram of the object. The object information at any particular plane is reconstructed by a cross-correlation between the complex valued hologram and the appropriate element of the PSH library. The characteristics and the performance of the proposed system were compared with an equivalent regular imaging system.

Meteor Film Recording with Digital Film Cameras with large CMOS Sensors

NASA Astrophysics Data System (ADS)

Slansky, P. C.

2016-12-01

In this article the author combines his professional know-how about cameras for film and television production with his amateur astronomy activities. Professional digital film cameras with high sensitivity are still quite rare in astronomy. One reason for this may be their costs of up to 20 000 and more (camera body only). In the interim, however,consumer photo cameras with film mode and very high sensitivity have come to the market for about 2 000 EUR. In addition, ultra-high sensitive professional film cameras, that are very interesting for meteor observation, have been introduced to the market. The particular benefits of digital film cameras with large CMOS sensors, including photo cameras with film recording function, for meteor recording are presented by three examples: a 2014 Camelopardalid, shot with a Canon EOS C 300, an exploding 2014 Aurigid, shot with a Sony alpha7S, and the 2016 Perseids, shot with a Canon ME20F-SH. All three cameras use large CMOS sensors; "large" meaning Super-35 mm, the classic 35 mm film format (24x13.5 mm, similar to APS-C size), or full format (36x24 mm), the classic 135 photo camera format. Comparisons are made to the widely used cameras with small CCD sensors, such as Mintron or Watec; "small" meaning 12" (6.4x4.8 mm) or less. Additionally, special photographic image processing of meteor film recordings is discussed.

Source processes of strong earthquakes in the North Tien-Shan region

NASA Astrophysics Data System (ADS)

Kulikova, G.; Krueger, F.

2013-12-01

Tien-Shan region attracts attention of scientists worldwide due to its complexity and tectonic uniqueness. A series of very strong destructive earthquakes occurred in Tien-Shan at the turn of XIX and XX centuries. Such large intraplate earthquakes are rare in seismology, which increases the interest in the Tien-Shan region. The presented study focuses on the source processes of large earthquakes in Tien-Shan. The amount of seismic data is limited for those early times. In 1889, when a major earthquake has occurred in Tien-Shan, seismic instruments were installed in very few locations in the world and these analog records did not survive till nowadays. Although around a hundred seismic stations were operating at the beginning of XIX century worldwide, it is not always possible to get high quality analog seismograms. Digitizing seismograms is a very important step in the work with analog seismic records. While working with historical seismic records one has to take into account all the aspects and uncertainties of manual digitizing and the lack of accurate timing and instrument characteristics. In this study, we develop an easy-to-handle and fast digitization program on the basis of already existing software which allows to speed up digitizing process and to account for all the recoding system uncertainties. Owing to the lack of absolute timing for the historical earthquakes (due to the absence of a universal clock at that time), we used time differences between P and S phases to relocate the earthquakes in North Tien-Shan and the body-wave amplitudes to estimate their magnitudes. Combining our results with geological data, five earthquakes in North Tien-Shan were precisely relocated. The digitizing of records can introduce steps into the seismograms which makes restitution (removal of instrument response) undesirable. To avoid the restitution, we simulated historic seismograph recordings with given values for damping and free period of the respective instrument and

Multilevel recording of complex amplitude data pages in a holographic data storage system using digital holography.

PubMed

Nobukawa, Teruyoshi; Nomura, Takanori

2016-09-05

A holographic data storage system using digital holography is proposed to record and retrieve multilevel complex amplitude data pages. Digital holographic techniques are capable of modulating and detecting complex amplitude distribution using current electronic devices. These techniques allow the development of a simple, compact, and stable holographic storage system that mainly consists of a single phase-only spatial light modulator and an image sensor. As a proof-of-principle experiment, complex amplitude data pages with binary amplitude and four-level phase are recorded and retrieved. Experimental results show the feasibility of the proposed holographic data storage system.

Digital photography

PubMed Central

Windsor, J S; Rodway, G W; Middleton, P M; McCarthy, S

2006-01-01

Objective The emergence of a new generation of “point‐and‐shoot” digital cameras offers doctors a compact, portable and user‐friendly solution to the recording of highly detailed digital photographs and video images. This work highlights the use of such technology, and provides information for those who wish to record, store and display their own medical images. Methods Over a 3‐month period, a digital camera was carried by a doctor in a busy, adult emergency department and used to record a range of clinical images that were subsequently transferred to a computer database. Results In total, 493 digital images were recorded, of which 428 were photographs and 65 were video clips. These were successfully used for teaching purposes, publications and patient records. Conclusions This study highlights the importance of informed consent, the selection of a suitable package of digital technology and the role of basic photographic technique in developing a successful digital database in a busy clinical environment. PMID:17068281

The Introduction and Refinement of the Assessment of Digitally Recorded Audio Presentations

ERIC Educational Resources Information Center

Sinclair, Stefanie

2016-01-01

This case study critically evaluates benefits and challenges of a form of assessment included in a final year undergraduate Religious Studies Open University module, which combines a written essay task with a digital audio recording of a short oral presentation. Based on the analysis of student and tutor feedback and sample assignments, this study…

Digital Health Services and Digital Identity in Alberta.

PubMed

McEachern, Aiden; Cholewa, David

2017-01-01

The Government of Alberta continues to improve delivery of healthcare by allowing Albertans to access their health information online. Alberta is the only province in Canada with provincial electronic health records for all its citizens. These records are currently made available to medical practitioners, but Alberta Health believes that providing Albertans access to their health records will transform the delivery of healthcare in Alberta. It is important to have a high level of assurance that the health records are provided to the correct Albertan. Alberta Health requires a way for Albertans to obtain a digital identity with a high level of identity assurance prior to releasing health records via the Personal Health Portal. Service Alberta developed the MyAlberta Digital ID program to provide a digital identity verification service. The Ministry of Health is leveraging MyAlberta Digital ID to enable Albertans to access their personal health records through the Personal Health Portal. The Government of Alberta is advancing its vision of patient-centred healthcare by enabling Albertans to access a trusted source for health information and their electronic health records using a secure digital identity.

Avoiding Failure for Australia's Digital Health Record: The Findings from a Rural E-Health Participatory Research Project.

PubMed

Almond, H; Cummings, E; Turner, P

2016-01-01

Low adoption and use of Australia's digital health record has driven the Australian Government to trial 'opt-out' registration from mid-June 2016. The assumption that automatic registration will increase use and thereby deliver benefit requires further investigation especially amongst those sections of the population in rural, regional, remote Australia living with complex chronic conditions. This paper reports on findings from a community based participatory e-health research project based on an initiative where people with complex chronic conditions and their carers attended a rural health promotion and lifestyle modification program. Through co-operative enquiry, health promotion officers and their clients were actively supported to adopt and use Australia's digital health record as an intervention. Simultaneously they were encouraged to reflect on its design and their perceptions of its overall impact on their individual ability to self-manage complex chronic conditions. The findings, ultimately contributing to a conceptual implementation and evaluation framework for Australia's digital health record that could directly avoid failure of the new 'opt-out' approach being adopted.

Are We Ready for Another Change? Digital Signatures Can Change How We Handle the Academic Record

ERIC Educational Resources Information Center

Black, Thomas C.; Mohr, John

2004-01-01

In this electronic age, where information is digital and service is virtual, the registrar profession is changing rapidly to keep up with increasing standards and expectations. EDI and now XML standards enable system-to-system exchanges of academic records information. While many of the registrar's profession display student academic records under…

Regional crustal structures along several paths in India and its surrounding regions using local P- and S-wave travel times and regional waveforms recorded from the March 28, 1999 Chamoli earthquake sequence

NASA Astrophysics Data System (ADS)

Saikia, C. K.; Ichinose, G. A.; Kayal, J. R.; Bhattacharya, S. N.; Shukla, A. K.

2001-12-01

The March 28, 1999 Chamoli earthquake (Mw 6.8) in northwest India generated a large sequence of aftershocks (M_ w> 4.0) which were recorded by a temporary network ofshort-period stations deployed by various organizations, namely India Meteorological Department (IMD), Geological Survey of India (GSI), National Geophysical Research Institute (NGRI) and Wadia Institute of Himalayan Geology (WIHG) in India. We inverted the local P- and S-wave arrival times from about 20 local stations jointly for all available aftershocks implementing a technique which optimizes both earthquake locations and crustal velocity model. Of these, seven events were recorded by more than 5 stations locating within 5o of the epicenters withazimuthal gap not greater than 90o. We used these events to compute the station correctionsfor local stations and applied these station corrections to relocate the entire sequence of the Chamoli aftershocks. The relocation vectors which indicate the direction toward which the events would move from the reference locations (in this case the GSI locations) suggest that for the majority of the seismic events they show movement towards the epicentral locations of the mainshock. The new locations of these events also show improvements in the error ellipse measurements. We have also investigated variations in crustal models using regional broadband seismograms from the mainshock recorded by the IMD stations in India (IMD, 2000). Using a crustal model developed earlier by Bhattacharya using surface-wave dispersion for northern India as a starting model, we conducted a systematic analysis of surface-wave dispersion characteristics recorded at these broadband stations. We synthesized f-k seismograms andexamined the relative amplitude of the Pnl waves to the surface waves and their absolutetravel-time differences. We used focal mechanism and depth that were independently determined by modeling teleseismic depth phases, pP and sP, and by modeling regional seismograms

Go Digital! Making Physical Samples a Valued Part of the Online Record of Science

NASA Astrophysics Data System (ADS)

Klump, J. F.; Lehnert, K.

2016-12-01

Physical samples, at first glance, seem to be the opposite to the virtual world of the internet. Yet, as anything not natively digital, physical samples can have a digital representation that is accessible through the internet. Most museums and other institutions have many more objects in their collections than they could ever put on display and many samples exist outside of formal curation workflows. Nevertheless, these objects can be of importance to science, maybe because this particular fossil is a holotype that defines an extinct animal species, or it is a mineral sample that was used to derive a reference optical reflectance spectrum that is used in the interpretation of remote sensing data from satellites. As these examples show, the value of a scientific collection lies not only in its objects but also in how these objects are integrated into the record of science. Fundamental to this are, of course, catalogues of the samples held in a collection. Significant value can be added to a collection if its catalogue is web accessible, and even better if its catalogue can be harvested into disciplinary portals to aid the discovery of samples. Sample curation in the digital age, however, must go beyond simply labeling and cataloguing. In the same way that publications and datasets can now be identified and accessed over the web, steps are now being made to do the same for physical samples. Globally unique, resolvable identifiers of samples, datasets and literature can serve as nodes to link these resources together and in this way, then cross-link between scientific interpretation in the literature, data interpreted in these works, and samples from which these data were derived. These linkages must not only be recorded in the metadata but must also be machine actionable to allow integration of these digital assets into the ever growing body and richness of the scientific record. This presentation will discuss cyberinfrastructures for samples and sample curation

37 CFR 260.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Royalty fees for the digital.... 260.2 Section 260.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... SERVICES' DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND MAKING OF EPHEMERAL PHONORECORDS § 260.2 Royalty...

37 CFR 260.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Royalty fees for the digital.... 260.2 Section 260.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... SERVICES' DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND MAKING OF EPHEMERAL PHONORECORDS § 260.2 Royalty...

37 CFR 260.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Royalty fees for the digital.... 260.2 Section 260.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... SERVICES' DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND MAKING OF EPHEMERAL PHONORECORDS § 260.2 Royalty...

37 CFR 260.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Royalty fees for the digital.... 260.2 Section 260.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS... SERVICES' DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND MAKING OF EPHEMERAL PHONORECORDS § 260.2 Royalty...

37 CFR 382.3 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 37 Patents, Trademarks, and Copyrights 1 2013-07-01 2013-07-01 false Royalty fees for the digital.... 382.3 Section 382.3 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND...

37 CFR 382.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Royalty fees for the digital.... 382.2 Section 382.2 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND...

37 CFR 382.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Royalty fees for the digital.... 382.2 Section 382.2 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND...

37 CFR 260.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Royalty fees for the digital.... 260.2 Section 260.2 Patents, Trademarks, and Copyrights U.S. COPYRIGHT OFFICE, LIBRARY OF CONGRESS... SERVICES' DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND MAKING OF EPHEMERAL PHONORECORDS § 260.2 Royalty...

37 CFR 382.2 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Royalty fees for the digital.... 382.2 Section 382.2 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND...

37 CFR 382.3 - Royalty fees for the digital performance of sound recordings and the making of ephemeral...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Royalty fees for the digital.... 382.3 Section 382.3 Patents, Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND...

The potential of digital dental radiography in recording the adductor sesamoid and the MP3 stages.

PubMed

Abdel-Kader, H M

1999-12-01

The current study was undertaken to evaluate the reliability of using a recent advance in clinical radiographic technique, digital dental radiography, in recording two growth indicators: the adductor sesamoid and MP3 stages. With an exposure time five times less than that used in the conventional approach, this method shows greatest flexibility in providing a high quality digitized radiographic images of the two growth indicators under investigation. Refereed Paper

Context indexing of digital cardiac ultrasound records in PACS

NASA Astrophysics Data System (ADS)

Lobodzinski, S. Suave; Meszaros, Georg N.

1998-07-01

Recent wide adoption of the DICOM 3.0 standard by ultrasound equipment vendors created a need for practical clinical implementations of cardiac imaging study visualization, management and archiving, DICOM 3.0 defines only a logical and physical format for exchanging image data (still images, video, patient and study demographics). All DICOM compliant imaging studies must presently be archived on a 650 Mb recordable compact disk. This is a severe limitation for ultrasound applications where studies of 3 to 10 minutes long are a common practice. In addition, DICOM digital echocardiography objects require physiological signal indexing, content segmentation and characterization. Since DICOM 3.0 is an interchange standard only, it does not define how to database composite video objects. The goal of this research was therefore to address the issues of efficient storage, retrieval and management of DICOM compliant cardiac video studies in a distributed PACS environment. Our Web based implementation has the advantage of accommodating both DICOM defined entity-relation modules (equipment data, patient data, video format, etc.) in standard relational database tables and digital indexed video with its attributes in an object relational database. Object relational data model facilitates content indexing of full motion cardiac imaging studies through bi-directional hyperlink generation that tie searchable video attributes and related objects to individual video frames in the temporal domain. Benefits realized from use of bi-directionally hyperlinked data models in an object relational database include: (1) real time video indexing during image acquisition, (2) random access and frame accurate instant playback of previously recorded full motion imaging data, and (3) time savings from faster and more accurate access to data through multiple navigation mechanisms such as multidimensional queries on an index, queries on a hyperlink attribute, free search and browsing.

37 CFR 201.28 - Statements of Account for digital audio recording devices or media.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following information for each unique combination of product category, technology, series or model number... quarterly period covered by the statement. (9) Technology of a device or medium is a digital audio recording... Congress. Forms and other information may be requested from the Licensing Division by facsimile...

Digital impression and jaw relation record for the fabrication of CAD/CAM custom tray.

PubMed

Kanazawa, Manabu; Iwaki, Maiko; Arakida, Toshio; Minakuchi, Shunsuke

2018-03-16

This article describes the protocol of a digital impression technique to make an impression and recording of the jaw relationship of edentulous patients for the fabrication of CAD/CAM custom tray using computer-aided design and manufacturing (CAD/CAM) technology. Scan the maxillary and mandibular edentulous jaws using an intraoral scanner. Scan the silicone jig with the maxillary and mandibular jaws while keeping the jig between the jaws. Import the standard tessellation language data of the maxillary and mandibular jaws and jig to make a jaw relation record and fabricate custom trays (CAD/CAM trays) using a rapid prototyping system. Make a definitive impression of the maxillary and mandibular jaws using the CAD/CAM trays. Digitalization of the complete denture fabrication process can simplify the complicated treatment and laboratory process of conventional methods In addition, the proposed method enables quality control regardless of the operator's experience and technique. Copyright © 2018. Published by Elsevier Ltd.

High-efficiency holograms fixed in lithium niobate after recording using a digital fringe stabilization system.

PubMed

Arizmendi, Luis; Ambite, Emilio J

2012-02-20

We used a digital feedback control loop system to produce reproducible fixed volume transmission holograms of high diffraction efficiency. Different strategies were investigated to obtain holograms of good quality and the highest refractive index modulation depth. Using this control system, we were able to record holograms with stationary fringes. Additionally to using the stationary fringe recording, a double recording-fixing schedule resulted in being the most appropriate one to produce reproducible holograms of better characteristics. This strategy is discussed and compared with other already established ones. © 2012 Optical Society of America

New technology in dietary assessment: a review of digital methods in improving food record accuracy.

PubMed

Stumbo, Phyllis J

2013-02-01

Methods for conducting dietary assessment in the United States date back to the early twentieth century. Methods of assessment encompassed dietary records, written and spoken dietary recalls, FFQ using pencil and paper and more recently computer and internet applications. Emerging innovations involve camera and mobile telephone technology to capture food and meal images. This paper describes six projects sponsored by the United States National Institutes of Health that use digital methods to improve food records and two mobile phone applications using crowdsourcing. The techniques under development show promise for improving accuracy of food records.

High-fidelity digital recording and playback sphygmomanometry system: device description and proof of concept.

PubMed

Lee, Jongshill; Chee, Youngjoon; Kim, Inyoung; Karpettas, Nikos; Kollias, Anastasios; Atkins, Neil; Stergiou, George S; O'Brien, Eoin

2015-10-01

This study describes the development of a new digital sphygmocorder (DS-II), which allows the digital recording and playback of the Korotkoff sounds, together with cuff pressure waveform, and its performance in a pilot validation study. A condenser microphone and stethoscope head detect Korotkoff sounds and an electronic chip, dedicated to audio-signal processing, is used to record high-quality sounds. Systolic and diastolic blood pressure (SBP/DBP) are determined from the recorded signals with an automatic beat detection algorithm that displays the cuff pressure at each beat on the monitor. Recordings of Korotkoff sounds, with the cuff pressure waveforms, and the simultaneous on-site assessments of SBP/DBP were performed during 100 measurements in 10 individuals. The observers reassessed the recorded signals to verify their accuracy and differences were calculated. The features of the high-fidelity DS-II, the technical specifications and the assessment procedures utilizing the playback software are described. Interobserver absolute differences (mean±SD) in measurements were 0.7±1.1/1.3±1.3 mmHg (SBP/DBP) with a mercury sphygmomanometer and 0.3±0.9/0.8±1.2 mmHg with the DS-II. The absolute DS-II mercury sphygmomanometer differences were 1.3±1.9/1.5±1.3 mmHg (SBP/DBP). The high-fidelity DS-II device presents satisfactory agreement with simultaneous measurements of blood pressure with a mercury sphygmomanometer. The device will be a valuable methodology for validating new blood pressure measurement technologies and devices.

High-frequency Born synthetic seismograms based on coupled normal modes

USGS Publications Warehouse

Pollitz, Fred F.

2011-01-01

High-frequency and full waveform synthetic seismograms on a 3-D laterally heterogeneous earth model are simulated using the theory of coupled normal modes. The set of coupled integral equations that describe the 3-D response are simplified into a set of uncoupled integral equations by using the Born approximation to calculate scattered wavefields and the pure-path approximation to modulate the phase of incident and scattered wavefields. This depends upon a decomposition of the aspherical structure into smooth and rough components. The uncoupled integral equations are discretized and solved in the frequency domain, and time domain results are obtained by inverse Fourier transform. Examples show the utility of the normal mode approach to synthesize the seismic wavefields resulting from interaction with a combination of rough and smooth structural heterogeneities. This approach is applied to an ∼4 Hz shallow crustal wave propagation around the site of the San Andreas Fault Observatory at Depth (SAFOD).

High-frequency Born synthetic seismograms based on coupled normal modes

USGS Publications Warehouse

Pollitz, F.

2011-01-01

High-frequency and full waveform synthetic seismograms on a 3-D laterally heterogeneous earth model are simulated using the theory of coupled normal modes. The set of coupled integral equations that describe the 3-D response are simplified into a set of uncoupled integral equations by using the Born approximation to calculate scattered wavefields and the pure-path approximation to modulate the phase of incident and scattered wavefields. This depends upon a decomposition of the aspherical structure into smooth and rough components. The uncoupled integral equations are discretized and solved in the frequency domain, and time domain results are obtained by inverse Fourier transform. Examples show the utility of the normal mode approach to synthesize the seismic wavefields resulting from interaction with a combination of rough and smooth structural heterogeneities. This approach is applied to an ~4 Hz shallow crustal wave propagation around the site of the San Andreas Fault Observatory at Depth (SAFOD). ?? The Author Geophysical Journal International ?? 2011 RAS.

Site Effects on Regional Seismograms Recorded in the Vicinity of Weston Observatory

DTIC Science & Technology

1993-09-30

flanks of the active volcanoes of Mauna Loa and Kilauea . The distances between the sites ranged from a few km to over 100 km. Although there is little...on the island of Hawaii using S-wave coda spectral ratios for frequencies between 1.5 and 15-Hz. They used 40 vertical I-Hz seismometers, and recorded...for the island of Hawaii , Bull. Seis Soc. Am-, 12 No- 3 1151-1185. Mayeda, K., S. Koyanagi, and K. Aki (1991). Site amplification from S-wave coda in

47 CFR 73.9008 - Interim approval of authorized digital output protection technologies and authorized recording...

Code of Federal Regulations, 2010 CFR

2010-10-01

... certification pursuant to § 0.459 of this chapter. (b) Initial certification window. Following the effective... window for digital output protection technologies or recording methods. Within thirty (30) days after the... certification window, the Commission shall issue a public notice identifying the certifications received and...

Estimating the spatial position of marine mammals based on digital camera recordings

PubMed Central

Hoekendijk, Jeroen P A; de Vries, Jurre; van der Bolt, Krissy; Greinert, Jens; Brasseur, Sophie; Camphuysen, Kees C J; Aarts, Geert

2015-01-01

Estimating the spatial position of organisms is essential to quantify interactions between the organism and the characteristics of its surroundings, for example, predator–prey interactions, habitat selection, and social associations. Because marine mammals spend most of their time under water and may appear at the surface only briefly, determining their exact geographic location can be challenging. Here, we developed a photogrammetric method to accurately estimate the spatial position of marine mammals or birds at the sea surface. Digital recordings containing landscape features with known geographic coordinates can be used to estimate the distance and bearing of each sighting relative to the observation point. The method can correct for frame rotation, estimates pixel size based on the reference points, and can be applied to scenarios with and without a visible horizon. A set of R functions was written to process the images and obtain accurate geographic coordinates for each sighting. The method is applied to estimate the spatiotemporal fine-scale distribution of harbour porpoises in a tidal inlet. Video recordings of harbour porpoises were made from land, using a standard digital single-lens reflex (DSLR) camera, positioned at a height of 9.59 m above mean sea level. Porpoises were detected up to a distance of ∽3136 m (mean 596 m), with a mean location error of 12 m. The method presented here allows for multiple detections of different individuals within a single video frame and for tracking movements of individuals based on repeated sightings. In comparison with traditional methods, this method only requires a digital camera to provide accurate location estimates. It especially has great potential in regions with ample data on local (a)biotic conditions, to help resolve functional mechanisms underlying habitat selection and other behaviors in marine mammals in coastal areas. PMID:25691982

Exploiting broadband seismograms and the mechanism of deep-focus earthquakes

NASA Astrophysics Data System (ADS)

Jiao, Wenjie

1997-09-01

Modern broadband seismic instrumentation has provided enormous opportunities to retrieve the information in almost any frequency band of seismic interest. In this thesis, we have investigated the long period responses of the broadband seismometers and the problem of recovering actual groundmotion. For the first time, we recovered the static offset for an earthquake from dynamic seismograms. The very long period waves of near- and intermediate-field term from 1994 large Bolivian deep earthquake (depth = 630km, Msb{W}=8.2) and 1997 large Argentina deep earthquake (depth = 285km, Msb{W}=7.1) are successfully recovered from the portable broadband recordings by BANJO and APVC networks. These waves provide another dynamic window into the seismic source process and may provide unique information to help constrain the source dynamics of deep earthquakes in the future. We have developed a new method to locate global explosion events based on broadband waveform stacking and simulated annealing. This method utilizes the information provided by the full broadband waveforms. Instead of "picking times", the character of the wavelet is used for locating events. The application of this methodology to a Lop Nor nuclear explosion is very successful, and suggests a procedure for automatic monitoring. We have discussed the problem of deep earthquakes from the viewpoint of rock mechanics and seismology. The rupture propagation of deep earthquakes requires a slip-weakening process unlike that for shallow events. However, this process is not necessarily the same as the process which triggers the rupture. Partial melting due to stress release is developed to account for the slip-weakening process in the deep earthquake rupture. The energy required for partial melting in this model is on the same order of the maximum energy required for the slip-weakening process in the shallow earthquake rupture. However, the verification of this model requires experimental work on the thermodynamic

Accuracy of a three-dimensional dentition model digitized from an interocclusal record using a non-contact surface scanner.

PubMed

Kihara, Takuya; Yoshimi, Yuki; Taji, Tsuyoshi; Murayama, Takeshi; Tanimoto, Kotaro; Nikawa, Hiroki

2016-08-01

For orthodontic treatment, it is important to assess the dental morphology, as well as the position and inclination of teeth. The aim of this article was to develop an efficient and accurate method for the three-dimensional (3D) imaging of the maxillary and mandibular dental morphology by measuring interocclusal records using an optical scanner. The occlusal and incisal morphology of participants was registered in the intercuspal position using a hydrophilic vinyl polysiloxane and digitized into 3D models using an optical scanner. Impressions were made of the maxilla and mandible in alginate materials in order to fabricate plaster models and created into 3D models using the optical scanner based on the principal triangulation method. The occlusal and incisal areas of the interocclusal records were retained. The buccal and lingual areas were added to these regions entirely by the 3D model of the plaster model. The accuracy of this method was evaluated for each tooth, with the dental cast 3D models used as controls. The 3D model created from the interocclusal record and the plaster model of the dental morphology was analysed in 3D software. The difference between the controls and the 3D models digitized from the interocclusal records was 0.068±0.048mm, demonstrating the accuracy of this method. The presence of severe crowding may compromise the ability to separate each tooth and digitize the dental morphology. The digitization method in this study provides sufficient accuracy to visualize the dental morphology, as well as the position and inclination of these teeth. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Seismic Symphonies

NASA Astrophysics Data System (ADS)

Strinna, Elisa; Ferrari, Graziano

2015-04-01

The project started in 2008 as a sound installation, a collaboration between an artist, a barrel organ builder and a seismologist. The work differs from other attempts of sound transposition of seismic records. In this case seismic frequencies are not converted automatically into the "sound of the earthquake." However, it has been studied a musical translation system that, based on the organ tonal scale, generates a totally unexpected sequence of sounds which is intended to evoke the emotions aroused by the earthquake. The symphonies proposed in the project have somewhat peculiar origins: they in fact come to life from the translation of graphic tracks into a sound track. The graphic tracks in question are made up by copies of seismograms recorded during some earthquakes that have taken place around the world. Seismograms are translated into music by a sculpture-instrument, half a seismograph and half a barrel organ. The organ plays through holes practiced on paper. Adapting the documents to the instrument score, holes have been drilled on the waves' peaks. The organ covers about three tonal scales, starting from heavy and deep sounds it reaches up to high and jarring notes. The translation of the seismic records is based on a criterion that does match the highest sounds to larger amplitudes with lower ones to minors. Translating the seismogram in the organ score, the larger the amplitude of recorded waves, the more the seismogram covers the full tonal scale played by the barrel organ and the notes arouse an intense emotional response in the listener. Elisa Strinna's Seismic Symphonies installation becomes an unprecedented tool for emotional involvement, through which can be revived the memory of the greatest disasters of over a century of seismic history of the Earth. A bridge between art and science. Seismic Symphonies is also a symbolic inversion: the instrument of the organ is most commonly used in churches, and its sounds are derived from the heavens and

Improvements to a Major Digital Archive of Seismic Waveforms from Nuclear Explosions

DTIC Science & Technology

2010-03-23

Semipalatinsk Test site ; Novaya Zemlya (461 traces) in Russia; and Lop Nor (120 traces) in China; and also from many Peaceful Nuclear Explosions (552... Semipalatinsk Test Site (circles) recorded at Borovoye (BRV) during 1966- 1989.The Balapan, Degelen, and Murzhik regions are indicated. 5 3. Locations of... Semipalatinsk Test Site , Kazakhstan; test of 1968 June 19 70 35. Last of seven sets of BRV seismograms on the KOD system for a UNE at the Balapan area

Technical and investigative support for high density digital satellite recording systems

NASA Technical Reports Server (NTRS)

Schultz, R. A.

1982-01-01

Methods and results of examinations and tests conducted on magnetic recording tapes under consideration for a high density digital (HDDR) satellite recording system are described. The examinations and tests investigate the performance of tapes with respect to their physical, magnetic and electrical characteristics. The objective of the tests, the likely significance of typical results, and the importance of the characteristics under investigation to the application are included. Theoretical discussions of measurement methods are provided where appropriate. Methods and results are discussed; the results of some sections are tabulated together to facilitate their comparison. The conclusion of each test section relates the test results to their possible significance and attempts to correlate the results of that section with the results of other tests. Some of the sections analyze sources of error inherent in the measurement methods or relate the value of the information obtained to the objectives of the test or the overall purpose of the project.

Use of digital patient photographs and electronic medical record data as diagnostic tools in Japan.

PubMed

Kawano, Koichi; Suzuki, Muneoh; Araki, Kenji

2012-10-01

An electronic medical record (EMR) system was introduced to the University of Miyazaki Hospital, in Japan, in 2006. This hospital is the only one in Japan to store digital photographs of patients within EMRs. In this paper, we report on the utility of these digital photographs for disease diagnosis. Digital photographs of patients were taken at the time of hospitalization, and have been used for patient identification by medical staff. More than 20,000 digital photographs have been saved, along with examination data and medical history classified by disease, since the introduction of EMR. In the first part of the present study, we analyzed the facial cheek color of patients using photographs taken at the time of hospitalization in relation to diagnoses in six disease categories that were considered to lead to characteristic facial skin characteristics. We verified the presence or absence of a characteristic color for each disease category. Next, we focused on four diseases, Analysis of the facial skin color of 1268 patients found the same patterns of characteristic color. Overall, we found significant differences in complexion according to disease type, based on the analysis of color from digital photos and other EMR information. We propose that color analysis data should become an additional item of information stored in EMRs.

Records Reaching Recording Data Technologies

NASA Astrophysics Data System (ADS)

Gresik, G. W. L.; Siebe, S.; Drewello, R.

2013-07-01

The goal of RECORDS (Reaching Recording Data Technologies) is the digital capturing of buildings and cultural heritage objects in hard-to-reach areas and the combination of data. It is achieved by using a modified crane from film industry, which is able to carry different measuring systems. The low-vibration measurement should be guaranteed by a gyroscopic controlled advice that has been , developed for the project. The data were achieved by using digital photography, UV-fluorescence photography, infrared reflectography, infrared thermography and shearography. Also a terrestrial 3D laser scanner and a light stripe topography scanner have been used The combination of the recorded data should ensure a complementary analysis of monuments and buildings.

Analysis of recently digitized continuous seismic data recorded during the March-May, 1980, eruption sequence at Mount St. Helens

NASA Astrophysics Data System (ADS)

Moran, S. C.; Malone, S. D.

2013-12-01

The May 18, 1980, eruption of Mount St. Helens (MSH) was an historic event, both for society and for the field of volcanology. However, our knowledge of the eruption and the precursory period leading up it is limited by the fact that most of the data, particularly seismic recordings, were not kept due to severe limitations in the amount of digital data that could be handled and stored using 1980 computer technology. Because of these limitations, only about 900 digital event files have been available for seismic studies of the March-May seismic sequence out of a total of more than 4,000 events that were counted using paper records. Fortunately, data from a subset of stations were also recorded continuously on a series of 24 analog 14-track IRIG magnetic tapes. We have recently digitized these tapes and time-corrected and cataloged the resultant digital data streams, enabling more in-depth studies of the (almost) complete pre-eruption seismic sequence using modern digital processing techniques. Of the fifteen seismic stations operating near MSH for at least a part of the two months between March 20 and May 18, six stations have relatively complete analog recordings. These recordings have gaps of minutes to days because of radio noise, poor tape quality, or missing tapes. In addition, several other stations have partial records. All stations had short-period vertical-component sensors with very limited dynamic range and unknown response details. Nevertheless, because the stations were at a range of distances and were operated at a range of gains, a variety of earthquake sizes were recorded on scale by at least one station, and therefore a much more complete understanding of the evolution of event types, sizes and character should be achievable. In our preliminary analysis of this dataset we have found over 10,000 individual events as recorded on stations 35-40 km from MSH, spanning a recalculated coda-duration magnitude range of ~1.5 to 4.1, including many M < 3

The 128-channel fully differential digital integrated neural recording and stimulation interface.

PubMed

Shahrokhi, Farzaneh; Abdelhalim, Karim; Serletis, Demitre; Carlen, Peter L; Genov, Roman

2010-06-01

We present a fully differential 128-channel integrated neural interface. It consists of an array of 8 X 16 low-power low-noise signal-recording and generation circuits for electrical neural activity monitoring and stimulation, respectively. The recording channel has two stages of signal amplification and conditioning with and a fully differential 8-b column-parallel successive approximation (SAR) analog-to-digital converter (ADC). The total measured power consumption of each recording channel, including the SAR ADC, is 15.5 ¿W. The measured input-referred noise is 6.08 ¿ Vrms over a 5-kHz bandwidth, resulting in a noise efficiency factor of 5.6. The stimulation channel performs monophasic or biphasic voltage-mode stimulation, with a maximum stimulation current of 5 mA and a quiescent power dissipation of 51.5 ¿W. The design is implemented in 0.35-¿m complementary metal-oxide semiconductor technology with the channel pitch of 200 ¿m for a total die size of 3.4 mm × 2.5 mm and a total power consumption of 9.33 mW. The neural interface was validated in in vitro recording of a low-Mg(2+)/high-K(+) epileptic seizure model in an intact hippocampus of a mouse.

Empirical Green's functions from small earthquakes: A waveform study of locally recorded aftershocks of the 1971 San Fernando earthquake

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchings, L.; Wu, F.

1990-02-10

Seismograms from 52 aftershocks of the 1971 San Fernando earthquake recorded at 25 stations distributed across the San Fernando Valley are examined to identify empirical Green's functions, and characterize the dependence of their waveforms on moment, focal mechanism, source and recording site spatial variations, recording site geology, and recorded frequency band. Recording distances ranged from 3.0 to 33.0 km, hypocentral separations ranged from 0.22 to 28.4 km, and recording site separations ranged from 0.185 to 24.2 km. The recording site geologies are diorite gneiss, marine and nonmarine sediments, and alluvium of varying thicknesses. Waveforms of events with moment below aboutmore » 1.5 {times} 10{sup 21} dyn cm are independent of the source-time function and are termed empirical Green's functions. Waveforms recorded at a particular station from events located within 1.0 to 3.0 km of each other, depending upon site geology, with very similar focal mechanism solutions are nearly identical for frequencies up to 10 Hz. There is no correlation to waveforms between recording sites at least 1.2 km apart, and waveforms are clearly distinctive for two sites 0.185 km apart. The geologic conditions of the recording site dominate the character of empirical Green's functions. Even for source separations of up to 20.0 km, the empirical Green's functions at a particular site are consistent in frequency content, amplification, and energy distribution. Therefore, it is shown that empirical Green's functions can be used to obtain site response functions. The observations of empirical Green's functions are used as a basis for developing the theory for using empirical Green's functions in deconvolution for source pulses and synthesis of seismograms of larger earthquakes.« less

Making Students' Mathematical Explanations Accessible to Teachers through the Use of Digital Recorders and iPads

ERIC Educational Resources Information Center

Soto, Melissa Marie; Ambrose, Rebecca

2016-01-01

Analyzing students' mathematical explanations can be a powerful tool to enhance teachers' practice, but collecting these explanations can be cumbersome. Here, we describe our quest to find effective tools to make explanations accessible to elementary (K-6th) teachers. First, we describe how digital audio recordings enabled teachers to focus on the…

77 FR 42764 - Distribution of the 2005, 2006, 2007 and 2008 Digital Audio Recording Technology Royalty Funds...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... LIBRARY OF CONGRESS Copyright Royalty Board [Docket No. 2010-8 CRB DD 2005-2008 (MW)] Distribution of the 2005, 2006, 2007 and 2008 Digital Audio Recording Technology Royalty Funds for the Musical Works Funds AGENCY: Copyright Royalty Board, Library of Congress. ACTION: Notice announcing commencement...

Experiments in Wave Record Analysis.

DTIC Science & Technology

1980-09-01

manipulation of wave records in digital form to produce a power density spectrum (PDS) with great efficiency. The PDS gives a presentation of the...instantaneous surface elevation digital points (the zero level reference). The individual period, Ti, was taken as the time difference between two successive...CONCLUSIONS This thesis presents the results of experiments in the analysis of ocean wave records. For this purpose 19 digitized records obtained from a wave

Separation of overlapping dental arch objects using digital records of illuminated plaster casts.

PubMed

Yadollahi, Mohammadreza; Procházka, Aleš; Kašparová, Magdaléna; Vyšata, Oldřich; Mařík, Vladimír

2015-07-11

Plaster casts of individual patients are important for orthodontic specialists during the treatment process and their analysis is still a standard diagnostical tool. But the growing capabilities of information technology enable their replacement by digital models obtained by complex scanning systems. This paper presents the possibility of using a digital camera as a simple instrument to obtain the set of digital images for analysis and evaluation of the treatment using appropriate mathematical tools of image processing. The methods studied in this paper include the segmentation of overlapping dental bodies and the use of different illumination sources to increase the reliability of the separation process. The circular Hough transform, region growing with multiple seed points, and the convex hull detection method are applied to the segmentation of orthodontic plaster cast images to identify dental arch objects and their sizes. The proposed algorithm presents the methodology of improving the accuracy of segmentation of dental arch components using combined illumination sources. Dental arch parameters and distances between the canines and premolars for different segmentation methods were used as a measure to compare the results obtained. A new method of segmentation of overlapping dental arch components using digital records of illuminated plaster casts provides information with the precision required for orthodontic treatment. The distance between corresponding teeth was evaluated with a mean error of 1.38% and the Dice similarity coefficient of the evaluated dental bodies boundaries reached 0.9436 with a false positive rate [Formula: see text] and false negative rate [Formula: see text].

Mobile Digital Recording: Adequacy of the iRig and iOS Device for Acoustic and Perceptual Analysis of Normal Voice.

PubMed

Oliveira, Gisele; Fava, Gaetano; Baglione, Melody; Pimpinella, Michael

2017-03-01

To determine whether the iRig and iOS device recording system is comparable with a standard computer recording system for digital voice recording. Thirty-seven vocally healthy adults, between ages 20 and 62, with a mean age of 33.9 years, 13 males and 24 females, were recruited. Recordings were simultaneously digitalized in an iPad and iPhone using a unidirectional condenser microphone for smartphones/tablets (iRig Mic, IK Multimedia) and in a computer laptop (Dell-Inspiron) using a unidirectional condenser microphone (Samson-CL5) connected to a preamplifier with phantom power. Both microphones were lined up at an equal fixed distance from the subject's mouth. Speech tasks consisted of a sustained vowel "ah" at comfortable pitch/loudness, counting from 1 to 10, and a glissando "ah" from a low to a high note. The samples captured on the iOS devices were transferred via SoundCloud in WAV format, and analyzed using the Praat software. The acoustic parameters measured were mean, min, and max F0, SD F0, jitter local, jitter rap, jitter ppq5, jitter ddp, shimmer local, shimmer local-dB, shimmer apq3, shimmer apq5, shimmer apq11, shimmer dda, NHR, and HNR. There were no statistically significant differences for any parameter and speech task analyzed for both iOS devices as compared with the gold standard computer/preamp system (all P values > 0.050). In addition, there were no statistical differences in the perceptual identification of the recordings among devices (P < 0.001). In the present study, the iRig and iOS device may provide reliable digital recording of normal voices. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Complete synthetic seismograms based on a spherical self-gravitating Earth model with an atmosphere-ocean-mantle-core structure

NASA Astrophysics Data System (ADS)

Wang, Rongjiang; Heimann, Sebastian; Zhang, Yong; Wang, Hansheng; Dahm, Torsten

2017-09-01

A hybrid method is proposed to calculate complete synthetic seismograms based on a spherically symmetric and self-gravitating Earth with a multilayered structure of atmosphere, ocean, mantle, liquid core and solid core. For large wavelengths, a numerical scheme is used to solve the geodynamic boundary-value problem without any approximation on the deformation and gravity coupling. With decreasing wavelength, the gravity effect on the deformation becomes negligible and the analytical propagator scheme can be used. Many useful approaches are used to overcome the numerical problems that may arise in both analytical and numerical schemes. Some of these approaches have been established in the seismological community and the others are developed for the first time. Based on the stable and efficient hybrid algorithm, an all-in-one code QSSP is implemented to cover the complete spectrum of seismological interests. The performance of the code is demonstrated by various tests including the curvature effect on teleseismic body and surface waves, the appearance of multiple reflected, teleseismic core phases, the gravity effect on long period surface waves and free oscillations, the simulation of near-field displacement seismograms with the static offset, the coupling of tsunami and infrasound waves, and free oscillations of the solid Earth, the atmosphere and the ocean. QSSP is open source software that can be used as a stand-alone FORTRAN code or may be applied in combination with a Python toolbox to calculate and handle Green's function databases for efficient coding of source inversion problems.

The brightness of lights on Earth at night, digitally recorded by DMSP satellite

USGS Publications Warehouse

Croft, Thomas A.

1979-01-01

The U.S. Air Force has operated its Defense Meteorological Satellite Program (DMSP) for nearly a decade, and film images from the system have been openly available since 1973. Films are well suited for the study of weather, and users of such films have derived much useful data. For many potential remote sensing applications, however, a quantitative measurement of the brightness of the imaged light patterns is needed, and it cannot be extracted with adequte accuracy from the films. Such information is contained in the telemetry from the spacecraft and is retained on digital tapes, which store the images for a few days while they await filming. For practical reasons, it has not heretofore been feasible for the Air Force to provide a remote-sensing user with these digital data, and the quantitative brightness information has been lost with the erasure of tapes for re-use. For the purpose of evaluation of tapes as a means for remote sensing, the Air Force recently did provide to the author six examples containing records of nighttime DMSP imagery similar to that which has previously 1 been evaluated by SRI International in a film format. The digital data create many new applications for these images, owing to a combination of several factors, the most important of which are the preservation of photometric information and of full spatial resolution. In this evaluation, stress has been placed upon determination of the broad potential value of the data rather than the full exploitation of any one aspect of it. The effort was guided by an objective to develop handling methods for the vast body of numbers--methods which will be practical for use in a research or engineering environment where budgets are limited, and specialized capabilities and image reproduction equipment has not already been developed. We report the degree of success obtained in this effort, pointing out the relative strengths and the relative limitations, as compared to the sophisticated, weather

Digital Audio Sampling for Film and Video.

ERIC Educational Resources Information Center

Stanton, Michael J.

Digital audio sampling is explained, and some of its implications in digital sound applications are discussed. Digital sound equipment is rapidly replacing analog recording devices as the state-of-the-art in audio technology. The philosophy of digital recording involves doing away with the continuously variable analog waveforms and turning the…

Comparison of Digital 12-Lead ECG and Digital 12-Lead Holter ECG Recordings in Healthy Male Subjects: Results from a Randomized, Double-Blinded, Placebo-Controlled Clinical Trial.

PubMed

Wang, Duolao; Bakhai, Ameet; Arezina, Radivoj; Täubel, Jörg

2016-11-01

Electrocardiogram (ECG) variability is greatly affected by the ECG recording method. This study aims to compare Holter and standard ECG recording methods in terms of central locations and variations of ECG data. We used the ECG data from a double-blinded, placebo-controlled, randomized clinical trial and used a mixed model approach to assess the agreement between two methods in central locations and variations of eight ECG parameters (Heart Rate, PR, QRS, QT, RR, QTcB, QTcF, and QTcI intervals). A total of 34 heathy male subjects with mean age of 25.7 ± 4.78 years were randomized to receive either active drug or placebo. Digital 12-lead ECG and digital 12-lead Holter ECG recordings were performed to assess ECG variability. There are no significant differences in least square mean between the Holter and the standard method for all ECG parameters. The total variance is consistently higher for the Holter method than the standard method for all ECG parameters except for QRS. The intraclass correlation coefficient (ICC) values for the Holter method are consistently lower than those for the standard method for all ECG parameters except for QRS, in particular, the ICC for QTcF is reduced from 0.86 for the standard method to 0.67 for the Holter method. This study suggests that Holter ECGs recorded in a controlled environment are not significantly different but more variable than those from the standard method. © 2016 Wiley Periodicals, Inc.

Coal-seismic, desktop computer programs in BASIC; Part 5, Perform X-square T-square analysis and plot normal moveout lines on seismogram overlay

USGS Publications Warehouse

Hasbrouck, W.P.

1983-01-01

Processing of data taken with the U.S. Geological Survey's coal-seismic system is done with a desktop, stand-alone computer. Programs for this computer are written in the extended BASIC language used by the Tektronix 4051 Graphic System. This report presents computer programs to perform X-square/T-square analyses and to plot normal moveout lines on a seismogram overlay.

Complete synthetic seismograms based on a spherical self-gravitating Earth model with an atmosphere-ocean-mantle-core structure

NASA Astrophysics Data System (ADS)

Wang, Rongjiang; Heimann, Sebastian; Zhang, Yong; Wang, Hansheng; Dahm, Torsten

2017-04-01

A hybrid method is proposed to calculate complete synthetic seismograms based on a spherically symmetric and self-gravitating Earth with a multi-layered structure of atmosphere, ocean, mantle, liquid core and solid core. For large wavelengths, a numerical scheme is used to solve the geodynamic boundary-value problem without any approximation on the deformation and gravity coupling. With the decreasing wavelength, the gravity effect on the deformation becomes negligible and the analytical propagator scheme can be used. Many useful approaches are used to overcome the numerical problems that may arise in both analytical and numerical schemes. Some of these approaches have been established in the seismological community and the others are developed for the first time. Based on the stable and efficient hybrid algorithm, an all-in-one code QSSP is implemented to cover the complete spectrum of seismological interests. The performance of the code is demonstrated by various tests including the curvature effect on teleseismic body and surface waves, the appearance of multiple reflected, teleseismic core phases, the gravity effect on long period surface waves and free oscillations, the simulation of near-field displacement seismograms with the static offset, the coupling of tsunami and infrasound waves, and free oscillations of the solid Earth, the atmosphere and the ocean. QSSP is open source software that can be used as a stand-alone FORTRAN code or may be applied in combination with a Python toolbox to calculate and handle Green's function databases for efficient coding of source inversion problems.

High-frequency source radiation during the 2011 Tohoku-Oki earthquake, Japan, inferred from KiK-net strong-motion seismograms

NASA Astrophysics Data System (ADS)

Kumagai, Hiroyuki; Pulido, Nelson; Fukuyama, Eiichi; Aoi, Shin

2013-01-01

investigate source processes of the 2011 Tohoku-Oki earthquake, we utilized a source location method using high-frequency (5-10 Hz) seismic amplitudes. In this method, we assumed far-field isotropic radiation of S waves, and conducted a spatial grid search to find the best fitting source locations along the subducted slab in each successive time window. Our application of the method to the Tohoku-Oki earthquake resulted in artifact source locations at shallow depths near the trench caused by limited station coverage and noise effects. We then assumed various source node distributions along the plate, and found that the observed seismograms were most reasonably explained when assuming deep source nodes. This result suggests that the high-frequency seismic waves were radiated at deeper depths during the earthquake, a feature which is consistent with results obtained from teleseismic back-projection and strong-motion source model studies. We identified three high-frequency subevents, and compared them with the moment-rate function estimated from low-frequency seismograms. Our comparison indicated that no significant moment release occurred during the first high-frequency subevent and the largest moment-release pulse occurred almost simultaneously with the second high-frequency subevent. We speculated that the initial slow rupture propagated bilaterally from the hypocenter toward the land and trench. The landward subshear rupture propagation consisted of three successive high-frequency subevents. The trenchward propagation ruptured the strong asperity and released the largest moment near the trench.

Digital audio recordings improve the outcomes of patient consultations: A randomised cluster trial.

PubMed

Wolderslund, Maiken; Kofoed, Poul-Erik; Holst, René; Axboe, Mette; Ammentorp, Jette

2017-02-01

To investigate the effects on patients' outcome of the consultations when provided with: a Digital Audio Recording (DAR) of the consultation and a Question Prompt List (QPL). This is a three-armed randomised controlled cluster trial. One group of patients received standard care, while the other two groups received either the QPL in combination with a recording of their consultation or only the recording. Patients from four outpatient clinics participated: Paediatric, Orthopaedic, Internal Medicine, and Urology. The effects were evaluated by patient-administered questionnaires. A total of 4349 patients participated in the study. DAR significantly increased the probability of fulfilling the participants' self-perceived information needs by 4.1% to 6.3%, particularly with regard to test results (OR=1.41, 95%CI: 1.14-1.74, p=0.001) and treatment options (OR=1.39, 95%CI: 1.13-1.71, p=0.002). Additionally, the interventions positively influenced the participants' satisfaction with the treatment, their relationship with the health professional, and their experience of being involved in the decision-making. Providing outpatients with a QPL and DAR of their consultation positively influences the patients' perception of having adequate information after the consultation. The implementation of a QPL and audio recording of consultations should be considered in routine practice. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Zero end-digit preference in recorded blood pressure and its impact on classification of patients for pharmacologic management in primary care - PREDICT-CVD-6.

PubMed

Broad, Joanna; Wells, Sue; Marshall, Roger; Jackson, Rod

2007-11-01

Most blood pressure recordings end with a zero end-digit despite guidelines recommending measurement to the nearest 2 mmHg. The impact of rounding on management of cardiovascular disease (CVD) risk is unknown. To document the use of rounding to zero end-digit and assess its potential impact on eligibility for pharmacologic management of CVD risk. Cross-sectional study. A total of 23,676 patients having opportunistic CVD risk assessment in primary care practices in New Zealand. To simulate rounding in practice, for patients with systolic blood pressures recorded without a zero end-digit, a second blood pressure measure was generated by arithmetically rounding to the nearest zero end-digit. A 10-year Framingham CVD risk score was estimated using actual and rounded blood pressures. Eligibility for pharmacologic treatment was then determined using the Joint British Societies' JBS2 and the British Hypertension Society BHS-IV guidelines based on actual and rounded blood pressure values. Zero end-digits were recorded in 64% of systolic and 62% of diastolic blood pressures. When eligibility for drug treatment was based only on a Framingham 10year CVD risk threshold of 20% or more, rounding misclassified one in 41 of all those patients subject to this error. Under the two guidelines which use different combinations of CVD risk and blood pressure thresholds, one in 19 would be misclassified under JBS2 and one in 12 under the BHS-IV guidelines mostly towards increased treatment. Zero end-digit preference significantly increases a patient's likelihood of being classified as eligible for drug treatment. Guidelines that base treatment decisions primarily on absolute CVD risk are less susceptible to these errors.

A scheme for recording a fast process at nanosecond scale by using digital holographic interferometry with continuous wave laser

NASA Astrophysics Data System (ADS)

Wang, Jun; Zhao, Jianlin; Di, Jianglei; Jiang, Biqiang

2015-04-01

A scheme for recording fast process at nanosecond scale by using digital holographic interferometry with continuous wave (CW) laser is described and demonstrated experimentally, which employs delayed-time fibers and angular multiplexing technique and can realize the variable temporal resolution at nanosecond scale and different measured depths of object field at certain temporal resolution. The actual delay-time is controlled by two delayed-time fibers with different lengths. The object field information in two different states can be simultaneously recorded in a composite hologram. This scheme is also suitable for recording fast process at picosecond scale, by using an electro-optic modulator.

Effect of tape recording on perturbation measures.

PubMed

Jiang, J; Lin, E; Hanson, D G

1998-10-01

Tape recorders have been shown to affect measures of voice perturbation. Few studies, however, have been conducted to quantitatively justify the use or exclusion of certain types of recorders in voice perturbation studies. This study used sinusoidal and triangular waves and synthesized vowels to compare perturbation measures extracted from directly digitized signals with those recorded and played back through various tape recorders, including 3 models of digital audio tape recorders, 2 models of analog audio cassette tape recorders, and 2 models of video tape recorders. Signal contamination for frequency perturbation values was found to be consistently minimal with digital recorders (percent jitter = 0.01%-0.02%), mildly increased with video recorders (0.05%-0.10%), moderately increased with a high-quality analog audio cassette tape recorder (0.15%), and most prominent with a low-quality analog audio cassette tape recorder (0.24%). Recorder effect on amplitude perturbation measures was lowest in digital recorders (percent shimmer = 0.09%-0.20%), mildly to moderately increased in video recorders and a high-quality analog audio cassette tape recorder (0.25%-0.45%), and most prominent in a low-quality analog audio cassette tape recorder (0.98%). The effect of cassette tape material, length of spooled tape, and duration of analysis were also tested and are discussed.

the P-wave upper mantle structure beneath an active spreading center: The Gulf of California

NASA Technical Reports Server (NTRS)

Walck, M. C.

1983-01-01

Detailed analysis of short period travel time, and waveform data reveals the upper mantle structure beneath an oceanic ridge to depths of 900 km. More than 1400 digital seismograms from earthquakes in Mexico and central America recorded at SCARLET yield 1753 travel times and 58 direct measurements of short period travel time as well as high quality, stable waveforms. The 29 events combine to form a continuous record section from 9 deg to 40 deg with an average station spacing of less than 5 km. First the travel times are inverted. Further constraints arise from the observed relative amplitudes of mantle phases, which are modeled by trial and error.

YASEIS: Yet Another computer program to calculate synthetic SEISmograms for a spherically multi-layered Earth model

NASA Astrophysics Data System (ADS)

Ma, Yanlu

2013-04-01

Although most researches focus on the lateral heterogeneity of 3D Earth nowadays, a spherically multi-layered model where the parameters depend only on depth still represents a good first order approximation of real Earth. Such 1D models could be used as starting models for seismic tomographic inversion or as background model where the source mechanisms are inverted. The problem of wave propagation in a spherically layered model had been solved theoretically long time ago (Takeuchi and Saito, 1972). The existing computer programs such as Mineos (developed by G. Master, J. Woodhouse and F. Gilbert), Gemini (Friederich and Dalkolmo 1995), DSM (Kawai et. al. 2006) and QSSP (Wang 1999) tackled the computational aspects of the problem. A new simple and fast program for computing the Green's function of a stack of spherical dissipative layers is presented here. The analytical solutions within each homogeneous spherical layer are joined through the continuous boundary conditions and propagated from the center of model up to the level of source depth. Another solution is built by propagating downwardly from the free surface of model to the source level. The final solution is then constructed in frequency domain from the previous two solutions to satisfy the discontinuities of displacements and stresses at the source level which are required by the focal mechanism. The numerical instability in the propagator approach is solved by complementing the matrix propagating with an orthonormalization procedure (Wang 1999). Another unstable difficulty due to the high attenuation in the upper mantle low velocity zone is overcome by switching the bases of solutions from the spherical Bessel functions to the spherical Hankel functions when necessary. We compared the synthetic seismograms obtained from the new program YASEIS with those computed by Gemini and QSSP. In the range of near distances, the synthetics by a reflectivity code for the horizontally layers are also compared with

Integrated Multidisciplinary Fault Observation System in the western part of the main Marmara Fault in the frame of an EU-FP7 project, titled as MARSITE

NASA Astrophysics Data System (ADS)

Ozel, Oguz; Guralp, Cansun; Tunc, Suleyman; Yalcinkaya, Esref; Meral Ozel, Nurcan

2015-04-01

The main objective of this study is to install a multi-parameter borehole system and surface array consisting of eight broadband sensors as close to the main Marmara Fault (MMF) in the western Marmara Sea as possible, and measure continuously the evolution of the state of the fault zone surrounding the MMF and to detect any anomaly or change which may occur before earthquakes by making use of the data from these arrays. The multi-parameter borehole system is composed of very wide dynamic range and stable borehole (VBB) broad band seismic sensor, and incorporate 3-D strain meter, tilt meter, and temperature and local hydrostatic pressure measuring devices. All these sensors are installed in 146m-deep borehole. All the sensor outputs are digitized; total of 11*24 bit-channels and 6*20 bit-channels. Real-time data transmission to the main server of the Marsite Project at Kandilli Observatory in Istanbul is accomplished. The multi-parameter borehole seismic station uses the latest update technologies and design ideas to record "Earth tides" signals to the smallest magnitude -3 events, as the innovative part of the Marsite Project. Bringing face to face the seismograms of microearthquakes recorded by borehole and surface instruments portrays quite different contents. The shorter recording duration and nearly flat frequency spectrum up to the Nyquist frequencies of borehole records are faced with longer recording duration and rapid decay of spectral amplitudes at higher frequencies of a surface seismogram. The main causative of the observed differences are near surface geology effects that mask most of the source related information the seismograms include, and that give rise to scattering, generating longer duration seismograms. In view of these circumstances, studies on microearthquakes employing surface seismograms may bring on misleading results. Particularly, the works on earthquake physics and nucleation process of earthquakes requires elaborate analysis of tiny

A comparison of the Maslov integral seismogram and the finite-difference method

NASA Astrophysics Data System (ADS)

Huang, X.; Kendall, J.-M.; Thomson, C. J.; West, G. F.

1998-03-01

The Maslov asymptotic method addresses some of the problems with standard ray theory, such as caustics and shadows. However, it has been applied relatively little, perhaps because its accuracy remains untested. In this study we examine Maslov integral (MI) seismograms by comparing them with finite-difference (FD) seismograms for several cases of interest, such as (1) velocity gradients generating traveltime triplications and shadows, (2) wave-front bending, kinking and folding in a low-velocity waveguide, and (3) wavefield propagation perturbed by a high-velocity slab. The results show that many features of high- and intermediate-frequency waveforms are reliably predicted by Maslov's technique, but also that it is far less reliable and even fails for low frequencies. The terms `high' and `low' are model-dependent, but we mean the range over which it is sensible to discuss signals associated with identifiable wave fronts and local (if complicated) effects that potentially can be unravelled in interpretation. Of the high- and intermediate-frequency wave components, those wave- front anomalies due to wave-front bending, kinking, folding or rapid ray divergence can be accurately given by MI. True diffractions due to secondary wave-front sections are theoretically not included in Maslov theory (as they require true diffracted rays), but in practice they can often be satisfactorily predicted. This occurs roughly within a wavelength of the truncated geometrical wave front, where such diffractions are most important since their amplitudes may still be as large as half that on the geometrical wave front itself. Outside this region MI is inaccurate (although then the diffractions are usually small). Thus waveforms of high and intermediate frequencies are essentially controlled by classical wave-front geometry. Our results also show that the accuracy of MI can be improved by rotating the Maslov integration axis so that the nearest wave-front anomaly is adequately `sampled

Dense array recordings in the San Bernardino Valley of landers-big bear aftershocks: Basin surface waves, Moho reflections, and three-dimensional simulations

USGS Publications Warehouse

Frankel, Arthur

1994-01-01

Fourteen GEOS seismic recorders were deployed in the San Bernardino Valley to study the propagation of short-period (T ≈ 1 to 3 sec) surface waves and Moho reflections. Three dense arrays were used to determine the direction and speed of propagation of arrivals in the seismograms. The seismograms for a shallow (d ≈ 1 km) M 4.9 aftershock of the Big Bear earthquake exhibit a very long duration (60 sec) of sustained shaking at periods of about 2 sec. Array analysis indicates that these late arrivals are dominated by surface waves traveling in various directions across the Valley. Some energy is arriving from a direction 180° from the epicenter and was apparently reflected from the edge of the Valley opposite the source. A close-in aftershock (Δ = 25 km, depth = 7 km) displays substantial short-period surface waves at deep-soil sites. A three-dimensional (3D) finite difference simulation produces synthetic seismograms with durations similar to those of the observed records for this event, indicating the importance of S-wave to surface-wave conversion near the edge of the basin. Flat-layered models severely underpredict the duration and spectral amplification of this deep-soil site. I show an example where the coda wave amplitude ratio at 1 to 2 Hz between a deep-soil and a rock site does not equal the S-wave amplitude ratio, because of the presence of surface waves in the coda of the deep-soil site. For one of the events studied (Δ ≈ 90 km), there are sizable phases that are critically reflected from the Moho (PmP and SmS). At one of the rock sites, the SmS phase has a more peaked spectrum that the direct S wave.

Digital disruption ?syndromes.

PubMed

Sullivan, Clair; Staib, Andrew

2017-05-18

The digital transformation of hospitals in Australia is occurring rapidly in order to facilitate innovation and improve efficiency. Rapid transformation can cause temporary disruption of hospital workflows and staff as processes are adapted to the new digital workflows. The aim of this paper is to outline various types of digital disruption and some strategies for effective management. A large tertiary university hospital recently underwent a rapid, successful roll-out of an integrated electronic medical record (EMR). We observed this transformation and propose several digital disruption "syndromes" to assist with understanding and management during digital transformation: digital deceleration, digital transparency, digital hypervigilance, data discordance, digital churn and post-digital 'depression'. These 'syndromes' are defined and discussed in detail. Successful management of this temporary digital disruption is important to ensure a successful transition to a digital platform. What is known about this topic? Digital disruption is defined as the changes facilitated by digital technologies that occur at a pace and magnitude that disrupt established ways of value creation, social interactions, doing business and more generally our thinking. Increasing numbers of Australian hospitals are implementing digital solutions to replace traditional paper-based systems for patient care in order to create opportunities for improved care and efficiencies. Such large scale change has the potential to create transient disruption to workflows and staff. Managing this temporary disruption effectively is an important factor in the successful implementation of an EMR. What does this paper add? A large tertiary university hospital recently underwent a successful rapid roll-out of an integrated electronic medical record (EMR) to become Australia's largest digital hospital over a 3-week period. We observed and assisted with the management of several cultural, behavioural and

Synthetic Seismogram Modeling.

DTIC Science & Technology

1982-11-15

various phases ( designated A, B, C, etc.) are indicated on the seismic record section at the top of the diagram. The observed travel times show a good...structure of the Yellowstone aperture seismic array (LAS), Moatana, U.S. region and experiment design , J. Geophys. Geol. Suwv. Open File Rep. 1671, 1972. Res...also display little For clarity in both typography and conitext, we coherence in waveform or even in the envelope of shall henceforth write -P-bar in

On the Complicated 410 km Discontinuity beneath Eastern China with the Seismic Triplications

NASA Astrophysics Data System (ADS)

Zhou, Y.; Li, G.; Sui, Y.

2013-12-01

The seismic triplications from the seismograms of mid-deep earthquakes at the Ryuku subduction zone recorded by the Chinese Digital Seismic Network (CDSN) between the epicentral distance between 10°-23° are used to study the upper mantle structure beneath Eastern China. Comparing the observed seismograms with the synthetic ones from different models based on IASP91 earth model and using the ray-tracing method, we found that the 410 km discontinuity is a gradient zone with the thickness of 20 km and there is low velocity layer atop the discontinuity which becomes thin from north to south beneath Eastern China. The complicated 410 km discontinuity with an atop low velocity layer may be caused by the dehydration of the Philippine sea subducting materials which are observed by the seismic tomopgraphy (Qu, et al., 2007; Li and van der Hilst, 2010). The low velocity gradient zone between the depths of 80-200 km is also been observed and may be related to the lithospheric-asthenosphere boundary.

First high speed imaging of lightning from summer thunderstorms over India: Preliminary results based on amateur recording using a digital camera

NASA Astrophysics Data System (ADS)

Narayanan, V. L.

2017-12-01

For the first time, high speed imaging of lightning from few isolated tropical thunderstorms are observed from India. The recordings are made from Tirupati (13.6oN, 79.4oE, 180 m above mean sea level) during summer months with a digital camera capable of recording high speed videos up to 480 fps. At 480 fps, each individual video file is recorded for 30 s resulting in 14400 deinterlaced images per video file. An automatic processing algorithm is developed for quick identification and analysis of the lightning events which will be discussed in detail. Preliminary results indicating different types of phenomena associated with lightning like stepped leader, dart leader, luminous channels corresponding to continuing current and M components are discussed. While most of the examples show cloud to ground discharges, few interesting cases of intra-cloud, inter-cloud and cloud-air discharges will also be displayed. This indicates that though high speed cameras with few 1000 fps are preferred for a detailed study on lightning, moderate range CMOS sensor based digital cameras can provide important information as well. The lightning imaging activity presented herein is initiated as an amateur effort and currently plans are underway to propose a suite of supporting instruments to conduct coordinated campaigns. The images discussed here are acquired from normal residential area and indicate how frequent lightning strikes are in such tropical locations during thunderstorms, though no towering structures are nearby. It is expected that popularizing of such recordings made with affordable digital cameras will trigger more interest in lightning research and provide a possible data source from amateur observers paving the way for citizen science.

[The scientific videotape with digital processing in surgery. The new opportunities offered surgery for videotape recording and postprocessing with the use of information and digital technologies].

PubMed

Picardi, N

1999-01-01

The facility of the tape recording of a surgical operation, by means of simple manageable apparatuses and at low costs, especially in comparison with the former cinematography, makes it possible for all surgeons to record their own operative activity. Therefore at present the demonstration in video of surgical interventions is very common, but very often the video-tapes show surgical events only in straight chronological succession, as for facts of chronicle news. The simplification of the otherwise sophisticated digital technology of informatics elaboration of images makes more convenient and advisable to assemble the more meaningful sequences for a final product of higher scientific value. The digital technology gives at the best its contribution during the phase of post-production of the video-tape, where the surgeon himself can assemble an end product of more value because aimed to a scientific and rational communication. Thanks to such an elaboration the video-tape can aim not simply to become a good documentary, but also to achieve an educational purpose or becomes a truly scientific film. The initial video will be recorded following a specific project, the script, foreseeing and programming what has to be demonstrated of the surgical operation, establishing therefore in advance the most important steps of the intervention. The sequences recorded will then be assembled not necessarily in a chronological succession but integrating the moving images with static pictures, as drawings, schemes, tables, aside the picture-in picture technique, and besides the vocal descriptive comment. The cinema language has accustomed us to a series of passages among the different sequences as fading, cross-over, "flash-back", aiming to stimulate the psychological associative powers and encourage those critical. The video-tape can be opportunely shortened, paying attention to show only the essential phases of the operation for demonstrate only the core of the problem and utilize

37 CFR 270.5 - Designated collection and distribution organizations for records of use of sound recordings under...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY... the digital transmission of sound recordings pursuant to section 114(f) of title 17 of the United... distribution of performance royalties under statutory license for digital transmission of sound recordings; and...

Zero end-digit preference in recorded blood pressure and its impact on classification of patients for pharmacologic management in primary care — PREDICT-CVD–6

PubMed Central

Broad, Joanna; Wells, Sue; Marshall, Roger; Jackson, Rod

2007-01-01

Background Most blood pressure recordings end with a zero end-digit despite guidelines recommending measurement to the nearest 2 mmHg. The impact of rounding on management of cardiovascular disease (CVD) risk is unknown. Aim To document the use of rounding to zero end-digit and assess its potential impact on eligibility for pharmacologic management of CVD risk. Design of study Cross-sectional study. Setting A total of 23 676 patients having opportunistic CVD risk assessment in primary care practices in New Zealand. Method To simulate rounding in practice, for patients with systolic blood pressures recorded without a zero end-digit, a second blood pressure measure was generated by arithmetically rounding to the nearest zero end-digit. A 10-year Framingham CVD risk score was estimated using actual and rounded blood pressures. Eligibility for pharmacologic treatment was then determined using the Joint British Societies' JBS2 and the British Hypertension Society BHS–IV guidelines based on actual and rounded blood pressure values. Results Zero end-digits were recorded in 64% of systolic and 62% of diastolic blood pressures. When eligibility for drug treatment was based only on a Framingham 10-year CVD risk threshold of 20% or more, rounding misclassified one in 41 of all those patients subject to this error. Under the two guidelines which use different combinations of CVD risk and blood pressure thresholds, one in 19 would be misclassified under JBS2 and one in 12 under the BHS–IV guidelines mostly towards increased treatment. Conclusion Zero end-digit preference significantly increases a patient's likelihood of being classified as eligible for drug treatment. Guidelines that base treatment decisions primarily on absolute CVD risk are less susceptible to these errors. PMID:17976291

An automated full waveform logging system for high-resolution P-wave profiles in marine sediments

NASA Astrophysics Data System (ADS)

Breitzke, Monika; Spieβ, Volkhard

1993-11-01

An automated, PC-based logging system has been developed to investigate marine sediment cores by full waveform transmission seismograms. High-resolution P-wave velocity and amplitude attenuation profiles are simultaneously derived from the transmission data to characterize the acoustic properties of the sediment column. A pair of ultrasonic, piezoelectric wheel probes is used to generate and record the transmission signals travelling radially through the sediment core. Both unsplit and split cores are allowed. Mounted in a carriage driven by a stepping motor via a shaft the probes automatically move along the core liner, stopping at equidistant spacings to provide a quasi-continuous inspection of the core by the transmission data. The axial travel distance and the core diameter are determined by digital measuring tools. First arrivals are picked automatically from the transmission seismograms using either a threshold in the seismogram's envelope or a cross-correlation algorithm taking the ‘zero-offset’ signal of both wheel probes into account. Combined with the core diameter these first arrivals lead to a P-wave velocity profile with a relative precision of 1 to 2 m s-1. Simultaneously, the maximum peak-to-peak amplitudes of the transmission seismograms are evaluated to get a first idea on the amplitude attenuation along the sediment core. Two examples of gravity cores taken during a recent cruise of R.V. METEOR in the Western Equatorial Atlantic are presented. They yield that the P-wave profiles can be used for locating strong and fine-scale lithological changes, e.g. turbidite layers and slight variations in the sand, silt or clay content. In addition, the transmission seismograms and their amplitude spectra obviously seem to reveal a correlation between the relative amount of low-frequency spectral components and the sediment grain size, and thus provide a tool for the determination of additional, related physical or sedimentological parameters in future

37 CFR 270.5 - Designated collection and distribution organizations for records of use of sound recordings under...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Patents, Trademarks, and Copyrights U.S. COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION... the digital transmission of sound recordings pursuant to section 114(f) of title 17 of the United... distribution of performance royalties under statutory license for digital transmission of sound recordings; and...

Observations and interpretation of fundamental mode Rayleigh wavefields recorded by the Transportable Array (USArray)

USGS Publications Warehouse

Pollitz, F.F.

2008-01-01

Broadband recordings of the dense Transportable Array (TA) in the western United States provide unparalleled detailed images of long-period seismic surface wavefields. With 400 stations spanning most of the western United States, wavefronts of fundamental mode Rayleigh waves may be visualized coherently across the array at periods ???40 s. In order to constrain the Rayleigh wave phase velocity structure in the western United States, I assemble a data set of vertical component seismograms from 53 teleseismic events recorded by the TA from April 2006 to October 2007. Complex amplitude spectra from these recordings at peni ods 27-100 s are interpreted using the multiplane wave tomographic method of Friederich and Wielandt (1995) and Pollitz (1999). This analysis yields detailed surface wave phase velocity and three-dimensional shear wave velocity patterns across the North American plate boundary zone, elucidating the active processes in the highly heterogeneous western U.S. upper mantle.

Digital Correlation In Laser-Speckle Velocimetry

NASA Technical Reports Server (NTRS)

Gilbert, John A.; Mathys, Donald R.

1992-01-01

Periodic recording helps to eliminate spurious results. Improved digital-correlation process extracts velocity field of two-dimensional flow from laser-speckle images of seed particles distributed sparsely in flow. Method which involves digital correlation of images recorded at unequal intervals, completely automated and has potential to be fastest yet.

Faster processing of multiple spatially-heterodyned direct to digital holograms

DOEpatents

Hanson, Gregory R.; Bingham, Philip R.

2006-10-03

Systems and methods are described for faster processing of multiple spatially-heterodyned direct to digital holograms. A method includes of obtaining multiple spatially-heterodyned holograms, includes: digitally recording a first spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; digitally recording a second spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded first spatially-heterodyned hologram by shifting a first original origin of the recorded first spatially-heterodyned hologram including spatial heterodyne fringes in Fourier space to sit on top of a spatial-heterodyne carrier frequency defined as a first angle between a first reference beam and a first, object beam; applying a first digital filter to cut off signals around the first original origin and performing an inverse Fourier transform on the result; Fourier analyzing the recorded second spatially-heterodyned hologram by shifting a second original origin of the recorded second spatially-heterodyned hologram including spatial heterodyne fringes in Fourier space to sit on top of a spatial-heterodyne carrier frequency defined as a second angle between a second reference beam and a second object beam; and applying a second digital filter to cut off signals around the second original origin and performing an inverse Fourier transform on the result, wherein digitally recording the first spatially-heterodyned hologram is completed before digitally recording the second spatially-heterodyned hologram and a single digital image includes both the first spatially-heterodyned hologram and the second spatially-heterodyned hologram.

Faster processing of multiple spatially-heterodyned direct to digital holograms

DOEpatents

Hanson, Gregory R [Clinton, TN; Bingham, Philip R [Knoxville, TN

2008-09-09

Systems and methods are described for faster processing of multiple spatially-heterodyned direct to digital holograms. A method includes of obtaining multiple spatially-heterodyned holograms, includes: digitally recording a first spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; digitally recording a second spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded first spatially-heterodyned hologram by shifting a first original origin of the recorded first spatially-heterodyned hologram including spatial heterodyne fringes in Fourier space to sit on top of a spatial-heterodyne carrier frequency defined as a first angle between a first reference beam and a first object beam; applying a first digital filter to cut off signals around the first original origin and performing an inverse Fourier transform on the result; Fourier analyzing the recorded second spatially-heterodyned hologram by shifting a second original origin of the recorded second spatially-heterodyned hologram including spatial heterodyne fringes in Fourier space to sit on top of a spatial-heterodyne carrier frequency defined as a second angle between a second reference beam and a second object beam; and applying a second digital filter to cut off signals around the second original origin and performing an inverse Fourier transform on the result, wherein digitally recording the first spatially-heterodyned hologram is completed before digitally recording the second spatially-heterodyned hologram and a single digital image includes both the first spatially-heterodyned hologram and the second spatially-heterodyned hologram.

The Need for (Digital) Story: First Graders Using Digital Tools to Tell Stories

ERIC Educational Resources Information Center

Solomon, Marva Jeanine

2010-01-01

The purpose of this study was to explore the process and product of African American First Graders as they participated in digital storytelling. Of interest was the role digital tools played in the creation process. Eight participants participated in 18 study sessions during which they composed, recorded, and then shared their digital texts with…

On baseline corrections and uncertainty in response spectrafor baseline variations commonly encountered in digital accelerograph records

USGS Publications Warehouse

Akkar, Sinan; Boore, David M.

2009-01-01

Most digital accelerograph recordings are plagued by long-period drifts, best seen in the velocity and displacement time series obtained from integration of the acceleration time series. These drifts often result in velocity values that are nonzero near the end of the record. This is clearly unphysical and can lead to inaccurate estimates of peak ground displacement and long-period spectral response. The source of the long-period noise seems to be variations in the acceleration baseline in many cases. These variations could be due to true ground motion (tilting and rotation, as well as local permanent ground deformation), instrumental effects, or analog-to-digital conversion. Very often the trends in velocity are well approximated by a linear trend after the strong shaking subsides. The linearity of the trend in velocity implies that no variations in the baseline could have occurred after the onset of linearity in the velocity time series. This observation, combined with the lack of any trends in the pre-event motion, allows us to compute the time interval in which any baseline variations could occur. We then use several models of the variations in a Monte Carlo procedure to derive a suite of baseline-corrected accelerations for each noise model using records from the 1999 Chi-Chi earthquake and several earthquakes in Turkey. Comparisons of the mean values of the peak ground displacements, spectral displacements, and residual displacements computed from these corrected accelerations for the different noise models can be used as a guide to the accuracy of the baseline corrections. For many of the records considered here the mean values are similar for each noise model, giving confidence in the estimation of the mean values. The dispersion of the ground-motion measures increases with period and is noise-model dependent. The dispersion of inelastic spectra is greater than the elastic spectra at short periods but approaches that of the elastic spectra at longer periods

Adolescents' Out-of-School Digital Reading Practices

ERIC Educational Resources Information Center

Zucker, Lauren

2018-01-01

Adolescents spend a significant portion of the day on digital devices, yet we know very little about their out-of-school reading practices. While screen recording technology allows researchers to record and view videos of digital reading, the majority of studies exploring digital reading limit participants' reading to researcher-selected texts and…

Application of a net-based baseline correction scheme to strong-motion records of the 2011 Mw 9.0 Tohoku earthquake

NASA Astrophysics Data System (ADS)

Tu, Rui; Wang, Rongjiang; Zhang, Yong; Walter, Thomas R.

2014-06-01

The description of static displacements associated with earthquakes is traditionally achieved using GPS, EDM or InSAR data. In addition, displacement histories can be derived from strong-motion records, allowing an improvement of geodetic networks at a high sampling rate and a better physical understanding of earthquake processes. Strong-motion records require a correction procedure appropriate for baseline shifts that may be caused by rotational motion, tilting and other instrumental effects. Common methods use an empirical bilinear correction on the velocity seismograms integrated from the strong-motion records. In this study, we overcome the weaknesses of an empirically based bilinear baseline correction scheme by using a net-based criterion to select the timing parameters. This idea is based on the physical principle that low-frequency seismic waveforms at neighbouring stations are coherent if the interstation distance is much smaller than the distance to the seismic source. For a dense strong-motion network, it is plausible to select the timing parameters so that the correlation coefficient between the velocity seismograms of two neighbouring stations is maximized after the baseline correction. We applied this new concept to the KiK-Net and K-Net strong-motion data available for the 2011 Mw 9.0 Tohoku earthquake. We compared the derived coseismic static displacement with high-quality GPS data, and with the results obtained using empirical methods. The results show that the proposed net-based approach is feasible and more robust than the individual empirical approaches. The outliers caused by unknown problems in the measurement system can be easily detected and quantified.

Tactical reconnaissance recorder alternatives

NASA Astrophysics Data System (ADS)

Klang, Mark R.

1997-11-01

The actual collection of data, such as digital imagery, using the multitude of sensors available today and in the near future, requires a high data rate digital recorder. The amount of memory, data rates, environmental factors and affordability are important issues when selecting the type of recording system. This paper will discuss two types of systems, tape and solid state. Emphasis will be placed on operational factors and specific mission profiles that are associated with a tactical reconnaissance mission. The current and projected costs of the digital tape recorder and soli state recorder will be examined. The logistics of moving the data from the aircraft to a Ground Exploitation System will be discussed. Once the data is collected it needs to be stored in non-volatile memory with easy access. One of the major problems encountered during Desert Storm was the inability to locate and retrieve reconnaissance images. A data base that can store terabytes of data and have the ability to recall this information from off-site locations should be a requirement for a Desert Storm scenario.

37 CFR 382.12 - Royalty fees for the public performance of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND THE REPRODUCTION OF EPHEMERAL RECORDINGS BY PREEXISTING SUBSCRIPTION SERVICES AND PREEXISTING SATELLITE DIGITAL AUDIO RADIO SERVICES...

37 CFR 382.12 - Royalty fees for the public performance of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND THE REPRODUCTION OF EPHEMERAL RECORDINGS BY PREEXISTING SUBSCRIPTION SERVICES AND PREEXISTING SATELLITE DIGITAL AUDIO RADIO SERVICES...

37 CFR 382.12 - Royalty fees for the public performance of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND THE REPRODUCTION OF EPHEMERAL RECORDINGS BY PREEXISTING SUBSCRIPTION SERVICES AND PREEXISTING SATELLITE DIGITAL AUDIO RADIO SERVICES...

37 CFR 382.12 - Royalty fees for the public performance of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND THE REPRODUCTION OF EPHEMERAL RECORDINGS BY PREEXISTING SUBSCRIPTION SERVICES AND PREEXISTING SATELLITE DIGITAL AUDIO RADIO SERVICES...

37 CFR 382.12 - Royalty fees for the public performance of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND TERMS FOR DIGITAL TRANSMISSIONS OF SOUND RECORDINGS AND THE REPRODUCTION OF EPHEMERAL RECORDINGS BY PREEXISTING SUBSCRIPTION SERVICES AND PREEXISTING SATELLITE DIGITAL AUDIO RADIO SERVICES...

Synchronisation Technique of Data Recorded on a Multichannel Tape Recorder,

DTIC Science & Technology

1984-01-01

retrieval Synchronizers I 16. Abstract A portable, self-contained, electronic digital unit, termed Data Synchroniser was designed and developed by EDE...AD A139 570 SYNCHRONISATION TECHNIQUE OF DATA RECORDED ON A / OULl ICHANNEL TAPE RECORDER (U) ENGINEERING DEVELOPMENT ESTA B LISHMENT MARIBYRNONO...BGINEERING DEVELOPMEWIT ESTABUSHIMENT S[ SYNCHRONISATION TECHNIQUE OF DATA - i RECORDED ON A MULTICHANNEL TAPE RECORDER BY J.D. DICKENS .t T)TCi j.D. ~c .s

GEOSCOPE network : continuous recording over 29 years

NASA Astrophysics Data System (ADS)

Pardo, C.; Bonaime, S.; Stutzmann, E.; Maggi, A.; Team, G.; Geoscope Team

2011-12-01

The GEOSCOPE observatory was created in 1982 and has now provided the scientific community with nearly 30 years of continuous broadband recordings . The 33 GEOSCOPE stations are installed in 19 countries, across all continents and on islands throughout the oceans. They are equipped with three component very broadband seismometers (STS1 or STS2) and 24 or 26 bit digitizers. Progressively stations are being equipped with warpless base plates which decrease long period noise on horizontal components by up to 15dB. In most stations, a pressure gauge and a thermometer are also installed. In 2011, 3 stations have been upgraded: COYC and PEL in Chile and ATD in Djibouti. Two new stations have been installed in Ivituut (station IVI, Greenland, GLISN project) and in Vanuatu islands (station SANVU). Currently, 27 stations transmit data in real or near real time to the GEOSCOPE Data Center and to tsunami warning centers. Continuous data from all stations are collected by the GEOSCOPE Data Center in Paris where they are validated, archived and made available to the international scientific community. Data are freely available to users via different interfaces according to data type (http://geoscope.ipgp.fr). We provide continuous data in real time through the seedlink protocol, validated continuous waveforms through the NetDC system and Data Handler Interface, a selection of large earthquake seismograms through the geoscope web portal. GEOSCOPE/IPGP is one of the four primary nodes of EIDA (European Integrated Data Archive) and our data are accessible through (http://www.seismicportal.eu). Noise levels for the last 20 years of continuous data are also accessible via the geoscope web site. Stations in both hemispheres show stronger noise amplitude during local winter except for the station DRV which is surrounded by sea ice in winter.

Improvements to a Major Digital Archive of Seismic Waveforms from Nuclear Explosions: The Borovoye Seismogram Archive

DTIC Science & Technology

2009-09-30

excitation of surface waves in the Balapan sub-region of the Soviet Semipalatinsk test site in central Asia were noted for anomalous behavior...complete recording history of Semipalatinsk Test Site (STS) explosions, waveform data from the Borovoye archive offer the opportunity to re-evaluate...Figure 2. Map of the Balapan sub-region of the Semipalatinsk Test Site showing locations of 50 tests currently understudy and the boundaries of NE

CEA SMAD 2016 Digitizer Evaluation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion J.

Sandia National Laboratories has tested and evaluated an updated SMAD digitizer, developed by the French Alternative Energies and Atomic Energy Commission (CEA). The SMAD digitizers are intended to record sensor output for seismic and infrasound monitoring applications. The purpose of this digitizer evaluation is to measure the performance characteristics in such areas as power consumption, input impedance, sensitivity, full scale, self-noise, dynamic range, system noise, response, passband, and timing. The SMAD digitizers have been updated since their last evaluation by Sandia to improve their performance when recording at a sample rate of 20 Hz for infrasound applications and 100 Hzmore » for hydro-acoustic seismic stations. This evaluation focuses primarily on the 20 Hz and 100 Hz sample rates. The SMAD digitizers are being evaluated for potential use in the International Monitoring System (IMS) of the Comprehensive Nuclear Test- Ban-Treaty Organization (CTBTO).« less

Magnetic Tape Recording for the Eighties

NASA Technical Reports Server (NTRS)

Kalil, Ford (Editor)

1982-01-01

The practical and theoretical aspects of state-of-the-art magnetic tape recording technology are reviewed. Topics covered include the following: (1) analog and digital magnetic tape recording, (2) tape and head wear, (3) wear testing, (4) magnetic tape certification, (5) care, handling, and management of magnetic tape, (6) cleaning, packing, and winding of magnetic tape, (7) tape reels, bands, and packaging, (8) coding techniques for high-density digital recording, and (9) tradeoffs of coding techniques.

Apparatus for direct-to-digital spatially-heterodyned holography

DOEpatents

Thomas, Clarence E.; Hanson, Gregory R.

2006-12-12

An apparatus operable to record a spatially low-frequency heterodyne hologram including spatially heterodyne fringes for Fourier analysis includes: a laser; a beamsplitter optically coupled to the laser; an object optically coupled to the beamsplitter; a focusing lens optically coupled to both the beamsplitter and the object; a digital recorder optically coupled to the focusing lens; and a computer that performs a Fourier transform, applies a digital filter, and performs an inverse Fourier transform. A reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form a spatially low-frequency heterodyne hologram including spatially heterodyne fringes for Fourier analysis which is recorded by the digital recorder, and the computer transforms the recorded spatially low-frequency heterodyne hologram including spatially heterodyne fringes and shifts axes in Fourier space to sit on top of a heterodyne carrier frequency defined by an angle between the reference beam and the object beam and cuts off signals around an original origin before performing the inverse Fourier transform.

Very low frequency earthquakes in Tohoku-Oki recorded by short-period ocean bottom seismographs

NASA Astrophysics Data System (ADS)

Takahashi, H.; Hino, R.; Ohta, Y.; Uchida, N.; Suzuki, S.; Shinohara, M.; Nakatani, Y.; Matsuzawa, T.

2017-12-01

Various kind of slow earthquakes have been found along many plate boundary zones in the world (Obara, and Kato, 2016). In the Tohoku subduction zone where slow event activities have been considered insignificant, slow slip events associated with low frequency tremors were identified prior to the 2011 Tohoku-Oki earthquake based on seafloor geodetic and seismographical observations. Recently very low frequency earthquakes (VLFEs) have been discovered by inspecting onshore broad-band seismograms. Although the activity of the detected VLFEs is low and the VLFEs occurred in the limited area, VLFEs tends to occur successively in a short time period. In this study, we try to characterize the VLFEs along the Japan Trench based on the seismograms obtained by the instruments deployed near the estimated epicenters.Temporary seismic observations using Ocean Bottom Seismometers (OBSs) have been carried out several times after the 2011 Tohoku-Oki earthquake, and several VLFE activities were observed during the deployments of the OBSs. Amplitudes of horizontal component seismograms of the OBSs grow shortly after the estimated origin times of the VLFEs identified by the onshore seismograms, even though the sensors are 4.5 Hz geophones. It is difficult to recognize evident onsets of P or S waves, correspondence between order of arrivals of discernible wave packets and their amplitudes suggests that these wave packets are seismic signals radiated from the VLFE sources. The OBSs detect regular local earthquakes of the similar magnitudes as the VLFEs. Signal powers of the possible VLFE seismograms are comparable to the regular earthquakes in the frequency range < 1 Hz, while significant deficiency of higher frequency components are observed.

Digital image film generation: from the photoscientist's perspective

USGS Publications Warehouse

Boyd, John E.

1982-01-01

The technical sophistication of photoelectronic transducers, integrated circuits, and laser-beam film recorders has made digital imagery an alternative to traditional analog imagery for remote sensing. Because a digital image is stored in discrete digital values, image enhancement is possible before the data are converted to a photographic image. To create a special film-reproduction curve - which can simulate any desired gamma, relative film speed, and toe/shoulder response - the digital-to-analog transfer function of the film recorder is uniquely defined and implemented by a lookup table in the film recorder. Because the image data are acquired in spectral bands, false-color composites also can be given special characteristics by selecting a reproduction curve tailored for each band.

Microseismic Event Location Improvement Using Adaptive Filtering for Noise Attenuation

NASA Astrophysics Data System (ADS)

de Santana, F. L., Sr.; do Nascimento, A. F.; Leandro, W. P. D. N., Sr.; de Carvalho, B. M., Sr.

2017-12-01

In this work we show how adaptive filtering noise suppression improves the effectiveness of the Source Scanning Algorithm (SSA; Kao & Shan, 2004) in microseism location in the context of fracking operations. The SSA discretizes the time and region of interest in a 4D vector and, for each grid point and origin time, a brigthness value (seismogram stacking) is calculated. For a given set of velocity model parameters, when origin time and hypocenter of the seismic event are correct, a maximum value for coherence (or brightness) is achieved. The result is displayed on brightness maps for each origin time. Location methods such as SSA are most effective when the noise present in the seismograms is incoherent, however, the method may present false positives when the noise present in the data is coherent as occurs in fracking operations. To remove from the seismograms, the coherent noise from the pump and engines used in the operation, we use an adaptive filter. As the noise reference, we use the seismogram recorded at the station closest to the machinery employed. Our methodology was tested on semi-synthetic data. The microseismic was represented by Ricker pulses (with central frequency of 30Hz) on synthetics seismograms, and to simulate real seismograms on a surface microseismic monitoring situation, we added real noise recorded in a fracking operation to these synthetics seismograms. The results show that after the filtering of the seismograms, we were able to improve our detection threshold and to achieve a better resolution on the brightness maps of the located events.

Procedures and Guidelines for Digitization (Scanning)

EPA Pesticide Factsheets

These documents establishes EPA's approach for creating digitized versions of Agency documents and establishes standards for capturing digitized content from paper and microform Agency documents and records.

Off-axis illumination direct-to-digital holography

DOEpatents

Thomas, Clarence E.; Price, Jeffery R.; Voelkl, Edgar; Hanson, Gregory R.

2004-06-08

Systems and methods are described for off-axis illumination direct-to-digital holography. A method of recording an off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis, includes: reflecting a reference beam from a reference mirror at a non-normal angle; reflecting an object beam from an object at an angle with respect to an optical axis defined by a focusing lens; focusing the reference beam and the object beam at a focal plane of a digital recorder to form the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; digitally recording the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; Fourier analyzing the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes by transforming axes of the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes in Fourier space to sit on top of a heterodyne carrier frequency defined as an angle between the reference beam and the object beam; applying a digital filter to cut off signals around an original origin; and then performing an inverse Fourier transform.

Digital Data Collection and Analysis: Application for Clinical Practice

ERIC Educational Resources Information Center

Ingram, Kelly; Bunta, Ferenc; Ingram, David

2004-01-01

Technology for digital speech recording and speech analysis is now readily available for all clinicians who use a computer. This article discusses some advantages of moving from analog to digital recordings and outlines basic recording procedures. The purpose of this article is to familiarize speech-language pathologists with computerized audio…

From papyrus to the electronic tablet: a brief history of the clinical medical record with lessons for the digital age.

PubMed

Gillum, Richard F

2013-10-01

A major transition is underway in documentation of patient-related data in clinical settings with rapidly accelerating adoption of the electronic health record and electronic medical record. This article examines the history of the development of medical records in the West in order to suggest lessons applicable to the current transition. The first documented major transition in the evolution of the clinical medical record occurred in antiquity, with the development of written case history reports for didactic purposes. Benefiting from Classical and Hellenistic models earlier than physicians in the West, medieval Islamic physicians continued the development of case histories for didactic use. A forerunner of modern medical records first appeared in Paris and Berlin by the early 19th century. Development of the clinical record in America was pioneered in the 19th century in major teaching hospitals. However, a clinical medical record useful for direct patient care in hospital and ambulatory settings was not developed until the 20th century. Several lessons are drawn from the 4000-year history of the medical record that may help physicians improve patient care in the digital age. Copyright © 2013 Elsevier Inc. All rights reserved.

37 CFR 380.3 - Royalty fees for the public performance of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND... fees for eligible digital transmissions of sound recordings made pursuant to 17 U.S.C. 114, and the...: For all digital audio transmissions, including simultaneous digital audio retransmissions of over-the...

37 CFR 380.3 - Royalty fees for the public performance of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND... fees for eligible digital transmissions of sound recordings made pursuant to 17 U.S.C. 114, and the...: For all digital audio transmissions, including simultaneous digital audio retransmissions of over-the...

37 CFR 380.3 - Royalty fees for the public performance of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND... fees for eligible digital transmissions of sound recordings made pursuant to 17 U.S.C. 114, and the.... For all digital audio transmissions, including simultaneous digital audio retransmissions of over-the...

37 CFR 380.3 - Royalty fees for the public performance of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY LICENSES RATES AND... fees for eligible digital transmissions of sound recordings made pursuant to 17 U.S.C. 114, and the...: For all digital audio transmissions, including simultaneous digital audio retransmissions of over-the...

Seismic anisotropy around the Gulf of Corinth, Greece, deduced from three-component seismograms of local earthquakes and its relationship with crustal strain

NASA Astrophysics Data System (ADS)

Bouin, Marie-Paule; TéLlez, Julia; Bernard, Pascal

1996-03-01

Several thousand three-component seismograms from local earthquakes recorded during two field experiments in August 1991 and November 1992 in the Gulf of Corinth have been analyzed to detect shear wave splitting. After a first selection of the events located in the S window of the considered stations, a second very strict selection of the records is applied in order to avoid the effect of scattered or converted phases which can mimic the behavior of shear wave splitting. Two main directions of fast S wave polarization have been detected: one oriented N105°E-N120°E, the other N55°E-N75°E. The first one is perpendicular to the main direction of extension of the Gulf provided by focal mechanism, Global Positioning System measurements, and tectonic studies, and is thus consistent with the extensive-dilatancy anisotropy (EDA) model. The second direction is subparallel to the direction of the active normal fault closest to the sites. This suggests a local control of the anisotropy by these active faults, either by a local rotation of the total stress field, in which case the EDA model may still explain the anisotropy, or by the existence of a specific microstructure or macrostructure generated by the long-term fault activity (set of secondary fault planes parallel to the major one), in which case the anisotropy direction would be significantly rotated from the stress direction (about 50°). The anisotropic signature does not seem to be affected by the geology of the site (pre-Tertiary limestone and Pleistocene sediments), except for a station located on the thick Plio-Quaternary deposits of a delta, where the time delay is significantly larger.

Advanced digital image archival system using MPEG technologies

NASA Astrophysics Data System (ADS)

Chang, Wo

2009-08-01

Digital information and records are vital to the human race regardless of the nationalities and eras in which they were produced. Digital image contents are produced at a rapid pace from cultural heritages via digitalization, scientific and experimental data via high speed imaging sensors, national defense satellite images from governments, medical and healthcare imaging records from hospitals, personal collection of photos from digital cameras. With these mass amounts of precious and irreplaceable data and knowledge, what standards technologies can be applied to preserve and yet provide an interoperable framework for accessing the data across varieties of systems and devices? This paper presents an advanced digital image archival system by applying the international standard of MPEG technologies to preserve digital image content.

Excitation of high-frequency surface waves with long duration in the Valley of Mexico

NASA Astrophysics Data System (ADS)

Iida, Masahiro

1999-04-01

During the 1985 Michoacan earthquake (Ms = 8.1), large-amplitude seismograms with extremely long duration were recorded in the lake bed zone of Mexico City. We interpret high-frequency seismic wave fields in the three geotechnical zones (the hill, the transition, and the lake bed zones) in the Valley of Mexico on the basis of a systematic analysis for borehole strong motion recordings. We make identification of wave types for real seismograms. First, amplitude ratios between surface and underground seismograms indicate that predominant periods of the surface seismograms are largely controlled by the wave field incident into surficial layers in the Valley of Mexico. We interpret recorded surface waves as fundamental-mode Love waves excited in the Mexican Volcanic Belt by calculating theoretical amplification for different-scale structures. Second, according to a cross-correlation analysis, the hill and transition seismograms are mostly surface waves. In the lake bed zone, while early portions are noisy body waves, late portions are mostly surface waves. Third, using two kinds of surface arrays with different station intervals, we investigate high-frequency surface-wave propagation in the lake bed zone. The wave propagation is very complicated, depending upon the time section and the frequency band. Finally, on the basis of a statistical time series model with an information criterion, we separate S- and surface-wave portions from lake bed seismograms. Surface waves are dominant and are recognized even in the early time section. Thus high-frequency surface waves with long duration in the Valley of Mexico are excited by the Mexican Volcanic Belt.

Digital Forensics Using Local Signal Statistics

ERIC Educational Resources Information Center

Pan, Xunyu

2011-01-01

With the rapid growth of the Internet and the popularity of digital imaging devices, digital imagery has become our major information source. Meanwhile, the development of digital manipulation techniques employed by most image editing software brings new challenges to the credibility of photographic images as the definite records of events. We…

Single-shot speckle reduction in numerical reconstruction of digitally recorded holograms: comment.

PubMed

Maycock, Jonathan; Hennelly, Bryan; McDonald, John

2015-09-01

We comment on a recent Letter by Hincapie et al. [Opt. Lett.40, 1623 (2015)], in which the authors proposed a method to reduce the speckle noise in digital holograms. This method was previously published by us in Maycock ["Improving reconstructions of digital holograms," Ph.D. thesis (National University of Ireland, 2012)] and Maycock and Hennelly [Improving Reconstructions of Digital Holograms: Speckle Reduction and Occlusions in Digital Holography (Lambert Academic, 2014)]. We also wish to highlight an important limitation of the method resulting from the superposition of different perspectives of the object/scene, which was not addressed in their Letter.

21 CFR 1311.210 - Archiving the initial record.

Code of Federal Regulations, 2010 CFR

2010-04-01

... substance prescription record that a pharmacy receives must be digitally signed by one of the following: (1) The last intermediary transmitting the record to the pharmacy must digitally sign the prescription immediately prior to transmission to the pharmacy. (2) The first pharmacy application that receives the...

MULTIPLE INPUT BINARY ADDER EMPLOYING MAGNETIC DRUM DIGITAL COMPUTING APPARATUS

DOEpatents

Cooke-Yarborough, E.H.

1960-12-01

A digital computing apparatus is described for adding a plurality of multi-digit binary numbers. The apparatus comprises a rotating magnetic drum, a recording head, first and second reading heads disposed adjacent to the first and second recording tracks, and a series of timing signals recorded on the first track. A series of N groups of digit-representing signals is delivered to the recording head at time intervals corresponding to the timing signals, each group consisting of digits of the same significance in the numbers, and the signal series is recorded on the second track of the drum in synchronism with the timing signals on the first track. The multistage registers are stepped cyclically through all positions, and each of the multistage registers is coupled to the control lead of a separate gate circuit to open the corresponding gate at only one selected position in each cycle. One of the gates has its input coupled to the bistable element to receive the sum digit, and the output lead of this gate is coupled to the recording device. The inputs of the other gates receive the digits to be added from the second reading head, and the outputs of these gates are coupled to the adding register. A phase-setting pulse source is connected to each of the multistage registers individually to step the multistage registers to different initial positions in the cycle, and the phase-setting pulse source is actuated each N time interval to shift a sum digit to the bistable element, where the multistage register coupled to bistable element is operated by the phase- setting pulse source to that position in its cycle N steps before opening the first gate, so that this gate opens in synchronism with each of the shifts to pass the sum digits to the recording head.

Digital PCR to determine the number of transcripts from single neurons after patch-clamp recording.

PubMed

Faragó, Nóra; Kocsis, Ágnes K; Lovas, Sándor; Molnár, Gábor; Boldog, Eszter; Rózsa, Márton; Szemenyei, Viktor; Vámos, Enikő; Nagy, Lajos I; Tamás, Gábor; Puskás, László G

2013-06-01

Whole-cell patch-clamp recording enables detection of electrophysiological signals from single neurons as well as harvesting of perisomatic RNA through the patch pipette for subsequent gene expression analysis. Amplification and profiling of RNA with traditional quantitative real-time PCR (qRT-PCR) do not provide exact quantitation due to experimental variation caused by the limited amount of nucleic acid in a single cell. Here we describe a protocol for quantifying mRNA or miRNA expression in individual neurons after patch-clamp recording using high-density nanocapillary digital PCR (dPCR). Expression of a known cell-type dependent marker gene (gabrd), as well as oxidative-stress related induction of hspb1 and hmox1 expression, was quantified in individual neurogliaform and pyramidal cells, respectively. The miRNA mir-132, which plays a role in neurodevelopment, was found to be equally expressed in three different types of neurons. The accuracy and sensitivity of this method were further validated using synthetic spike-in templates and by detecting genes with very low levels of expression.

2017 Guralp Affinity Digitizer Evaluation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion J.

Sandia National Laboratories has tested and evaluated two Guralp Affinity digitizers. The Affinity digitizers are intended to record sensor output for seismic and infrasound monitoring applications. The purpose of this digitizer evaluation is to measure the performance characteristics in such areas as power consumption, input impedance, sensitivity, full scale, self- noise, dynamic range, system noise, response, passband, and timing. The Affinity digitizers are being evaluated for potential use in the International Monitoring System (IMS) of the Comprehensive Nuclear Test-Ban-Treaty Organization (CTBTO).

Parameters of Higuchi's method to characterize primary waves in some seismograms from the Mexican subduction zone

NASA Astrophysics Data System (ADS)

Gálvez-Coyt, Gonzalo; Muñoz-Diosdado, Alejandro; Peralta, José; Balderas-López, José; Angulo-Brown, Fernando

2012-06-01

Higuchi's method is a procedure that, if applied appropriately, can determine in a reliable way the fractal dimension D of time series; this fractal dimension permits to characterize the degree of correlation of the series. However, when analyzing some time series with Higuchi's method, there are oscillations at the right-hand side of the graph, which can cause a mistaken determination of the fractal dimension. In this work, an appropriate explanation is given to this type of behaviour. Using the seismogram as a time series and the properties of the P and S waves, it is possible to use the properties of Higuchi's method to previously detect the arrival of the earthquake shacking stage, some seconds in advance, approximately 30-35 s in the case of Mexico City. Thus, we propose the Higuchi's method to characterize and detect the P waves in order to estimate the strength of the forthcoming S waves.

Digital security technology simplified.

PubMed

Scaglione, Bernard J

2007-01-01

Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

21 CFR 1311.210 - Archiving the initial record.

Code of Federal Regulations, 2011 CFR

2011-04-01

... prescription record that a pharmacy receives must be digitally signed by one of the following: (1) The last intermediary transmitting the record to the pharmacy must digitally sign the prescription immediately prior to transmission to the pharmacy. (2) The first pharmacy application that receives the electronic prescription must...

21 CFR 1311.210 - Archiving the initial record.

Code of Federal Regulations, 2013 CFR

2013-04-01

... prescription record that a pharmacy receives must be digitally signed by one of the following: (1) The last intermediary transmitting the record to the pharmacy must digitally sign the prescription immediately prior to transmission to the pharmacy. (2) The first pharmacy application that receives the electronic prescription must...

21 CFR 1311.210 - Archiving the initial record.

Code of Federal Regulations, 2014 CFR

2014-04-01

... prescription record that a pharmacy receives must be digitally signed by one of the following: (1) The last intermediary transmitting the record to the pharmacy must digitally sign the prescription immediately prior to transmission to the pharmacy. (2) The first pharmacy application that receives the electronic prescription must...

21 CFR 1311.210 - Archiving the initial record.

Code of Federal Regulations, 2012 CFR

2012-04-01

... prescription record that a pharmacy receives must be digitally signed by one of the following: (1) The last intermediary transmitting the record to the pharmacy must digitally sign the prescription immediately prior to transmission to the pharmacy. (2) The first pharmacy application that receives the electronic prescription must...

76 FR 18738 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... Records in the System: First, middle and last name, nickname, last four digits of Social Security Number..., Accessing, Retaining, and Disposing of Records: Storage: Records are stored on electronic storage media... characteristics (such as name, last four digits of Social Security Number (SSN), series, grade, dates of service...

Portable MP3 players: innovative devices for recording qualitative interviews.

PubMed

Fernandez, Ritin S; Griffiths, Rhonda

2007-01-01

Digital technology has provided a new way of recording qualitative interviews, surpassing the clarity, usability and storage capabilities of conventional tape recorders. Ritin Fernandez and Rhonda Griffiths examine a technological resource that pervades modern social life and which can be used effectively for digitally recording interviews for qualitative research.

The place-value of a digit in multi-digit numbers is processed automatically.

PubMed

Kallai, Arava Y; Tzelgov, Joseph

2012-09-01

The automatic processing of the place-value of digits in a multi-digit number was investigated in 4 experiments. Experiment 1 and two control experiments employed a numerical comparison task in which the place-value of a non-zero digit was varied in a string composed of zeros. Experiment 2 employed a physical comparison task in which strings of digits varied in their physical sizes. In both types of tasks, the place-value of the non-zero digit in the string was irrelevant to the task performed. Interference of the place-value information was found in both tasks. When the non-zero digit occupied a lower place-value, it was recognized slower as a larger digit or as written in a larger font size. We concluded that place-value in a multi-digit number is processed automatically. These results support the notion of a decomposed representation of multi-digit numbers in memory. PsycINFO Database Record (c) 2012 APA, all rights reserved.

Fuzzy topological digital space and digital fuzzy spline of electroencephalography during epileptic seizures

NASA Astrophysics Data System (ADS)

Shah, Mazlina Muzafar; Wahab, Abdul Fatah

2017-08-01

Epilepsy disease occurs because of there is a temporary electrical disturbance in a group of brain cells (nurons). The recording of electrical signals come from the human brain which can be collected from the scalp of the head is called Electroencephalography (EEG). EEG then considered in digital format and in fuzzy form makes it a fuzzy digital space data form. The purpose of research is to identify the area (curve and surface) in fuzzy digital space affected by inside epilepsy seizure in epileptic patient's brain. The main focus for this research is to generalize fuzzy topological digital space, definition and basic operation also the properties by using digital fuzzy set and the operations. By using fuzzy digital space, the theory of digital fuzzy spline can be introduced to replace grid data that has been use previously to get better result. As a result, the flat of EEG can be fuzzy topological digital space and this type of data can be use to interpolate the digital fuzzy spline.

The United States digital recording industry

NASA Technical Reports Server (NTRS)

Simonds, John L.

1993-01-01

The recording industry resembles the semiconductor industry in several aspects. Both are large (greater than $60 Billion/year revenues); both are considered critical technologies supporting national objectives; both are experiencing increased competition from foreign suppliers; they recognize significant opportunities for both technological and market growth in the decade to come; and both realize that a key to this future growth lies in alliances among industry, academia, and government. The semiconductor industry has made significant investments in alliances relating to manufacturing technologies (SEMATECH) and to joint long-term technology research centered in universities (SRC). The federal government has provided funding support of these efforts in recognition of the critical roles semiconductor technologies play in national interests. The recording industry is now also forming critical alliances, but has been slower in starting and in gaining broad recognition by government agencies and legislators that the industry needs federal support. Traditionally, the recording industry has been viewed as mature, stable, and, while critical to national interests, able to chart and fund its own course toward future national needs. That perception is fortunately changing.

Stewardship of very large digital data archives

NASA Technical Reports Server (NTRS)

Savage, Patric

1991-01-01

An archive is a permanent store. There are relatively few very large digital data archives in existence. Most business records are expired within five or ten years. Many kinds of business records that do have long lives are embedded in data bases that are continually updated and re-issued cyclically. Also, a great deal of permanent business records are actually archived as microfilm, fiche, or optical disk images - their digital version being an operational convenience rather than an archive. The problems forseen in stewarding the very large digital data archives that will accumulate during the mission of the Earth Observing System (EOS) are addressed. It focuses on the function of shepherding archived digital data into an endless future. Stewardship entails storing and protecting the archive and providing meaningful service to the community of users. The steward will (1) provide against loss due to physical phenomena; (2) assure that data is not lost due to storage technology obsolescence; and (3) maintain data in a current formatting methodology.

High-capacity high-speed recording

NASA Astrophysics Data System (ADS)

Jamberdino, A. A.

1981-06-01

Continuing advances in wideband communications and information handling are leading to extremely large volume digital data systems for which conventional data storage techniques are becoming inadequate. The paper presents an assessment of alternative recording technologies for the extremely wideband, high capacity storage and retrieval systems currently under development. Attention is given to longitudinal and rotary head high density magnetic recording, laser holography in human readable/machine readable devices and a wideband recorder, digital optical disks, and spot recording in microfiche formats. The electro-optical technologies considered are noted to be capable of providing data bandwidths up to 1000 megabits/sec and total data storage capacities in the 10 to the 11th to 10 to the 12th bit range, an order of magnitude improvement over conventional technologies.

Digitally enabled patients, professionals and providers: making the case for an electronic health record in mental health services.

PubMed

Richardson, Jonathan; McDonald, Joe

2016-10-01

The move to a digital health service may improve some components of health systems: information, communication and documentation of care. This article gives a brief definition and history of what is meant by an electronic health record (EHR). There is some evidence of benefits in a number of areas, including legibility, accuracy and the secondary use of information, but there is a need for further research, which may need to use different methodologies to analyse the impact an EHR has on patients, professionals and providers.

Towards a 1000 tracks digital tape recorder

NASA Technical Reports Server (NTRS)

Coutellier, J. M.; Castera, J. P.; Colineau, J.; Lehureau, J. C.; Maurice, F.; Hanna, C.

1993-01-01

As the demand for high data rate (up to 1 Gb/s), high density (down to 1 sq micron/bit) tape recorder increases, the main investigation trend is an improvement of the well known helical scan concept. The drawbacks of this technology are also well known; sophisticated mechanics, head to tape contact, and wear problems. In our fixed head approach, the recorder mechanics is made much more simple, but the complexity is turned towards the integrated magnetic components, which have to record and reproduce hundreds of tracks in parallel. Our multiplexed write inductive head and magneto-optical readout head will be described, and the global system performances evaluated.

Undersampled digital holographic interferometry

NASA Astrophysics Data System (ADS)

Halaq, H.; Demoli, N.; Sović, I.; Šariri, K.; Torzynski, M.; Vukičević, D.

2008-04-01

In digital holography, primary holographic fringes are recorded using a matricial CCD sensor. Because of the low spatial resolution of currently available CCD arrays, the angle between the reference and object beams must be limited to a few degrees. Namely, due to the digitization involved, the Shannon's criterion imposes that the Nyquist sampling frequency be at least twice the highest signal frequency. This means that, in the case of the recording of an interference fringe pattern by a CCD sensor, the inter-fringe distance must be larger than twice the pixel period. This in turn limits the angle between the object and the reference beams. If this angle, in a practical holographic interferometry measuring setup, cannot be limited to the required value, aliasing will occur in the reconstructed image. In this work, we demonstrate that the low spatial frequency metrology data could nevertheless be efficiently extracted by careful choice of twofold, and even threefold, undersampling of the object field. By combining the time-averaged recording with subtraction digital holography method, we present results for a loudspeaker membrane interferometric study obtained under strong aliasing conditions. High-contrast fringes, as a consequence of the vibration modes of the membrane, are obtained.

Casual instrument corrections for short-period and broadband seismometers

USGS Publications Warehouse

Haney, Matthew M.; Power, John; West, Michael; Michaels, Paul

2012-01-01

Of all the filters applied to recordings of seismic waves, which include source, path, and site effects, the one we know most precisely is the instrument filter. Therefore, it behooves seismologists to accurately remove the effect of the instrument from raw seismograms. Applying instrument corrections allows analysis of the seismogram in terms of physical units (e.g., displacement or particle velocity of the Earth’s surface) instead of the output of the instrument (e.g., digital counts). The instrument correction can be considered the most fundamental processing step in seismology since it relates the raw data to an observable quantity of interest to seismologists. Complicating matters is the fact that, in practice, the term “instrument correction” refers to more than simply the seismometer. The instrument correction compensates for the complete recording system including the seismometer, telemetry, digitizer, and any anti‐alias filters. Knowledge of all these components is necessary to perform an accurate instrument correction. The subject of instrument corrections has been covered extensively in the literature (Seidl, 1980; Scherbaum, 1996). However, the prospect of applying instrument corrections still evokes angst among many seismologists—the authors of this paper included. There may be several reasons for this. For instance, the seminal paper by Seidl (1980) exists in a journal that is not currently available in electronic format and cannot be accessed online. Also, a standard method for applying instrument corrections involves the programs TRANSFER and EVALRESP in the Seismic Analysis Code (SAC) package (Goldstein et al., 2003). The exact mathematical methods implemented in these codes are not thoroughly described in the documentation accompanying SAC.

Digital imaging and electronic patient records in pathology using an integrated department information system with PACS.

PubMed

Kalinski, Thomas; Hofmann, Harald; Franke, Dagmar-Sybilla; Roessner, Albert

2002-01-01

Picture archiving and communication systems have been widely used in radiology thus far. Owing to the progress made in digital photo technology, their use in medicine opens up further opportunities. In the field of pathology, digital imaging offers new possiblities for the documentation of macroscopic and microscopic findings. Digital imaging has the advantage that the data is permanently and readily available, independent of conventional archives. In the past, PACS was a separate entity. Meanwhile, however, PACS has been integrated in DIS, the department information system, which was also run separately in former times. The combination of these two systems makes the administration of patient data, findings and images easier. Moreover, thanks to the introduction of special communication standards, a data exchange between different department information systems and hospital information systems (HIS) is possible. This provides the basis for a communication platform in medicine, constituting an electronic patient record (EPR) that permits an interdisciplinary treatment of patients by providing data of findings and images from clinics treating the same patient. As the pathologic diagnosis represents a central and often therapy-determining component, it is of utmost importance to add pathologic diagnoses to the EPR. Furthermore, the pathologist's work is considerably facilitated when he is able to retrieve additional data from the patient file. In this article, we describe our experience gained with the combined PACS and DIS systems recently installed at the Department of Pathology, University of Magdeburg. Moreover, we evaluate the current situation and future prospects for PACS in pathology.

Private traits and attributes are predictable from digital records of human behavior.

PubMed

Kosinski, Michal; Stillwell, David; Graepel, Thore

2013-04-09

We show that easily accessible digital records of behavior, Facebook Likes, can be used to automatically and accurately predict a range of highly sensitive personal attributes including: sexual orientation, ethnicity, religious and political views, personality traits, intelligence, happiness, use of addictive substances, parental separation, age, and gender. The analysis presented is based on a dataset of over 58,000 volunteers who provided their Facebook Likes, detailed demographic profiles, and the results of several psychometric tests. The proposed model uses dimensionality reduction for preprocessing the Likes data, which are then entered into logistic/linear regression to predict individual psychodemographic profiles from Likes. The model correctly discriminates between homosexual and heterosexual men in 88% of cases, African Americans and Caucasian Americans in 95% of cases, and between Democrat and Republican in 85% of cases. For the personality trait "Openness," prediction accuracy is close to the test-retest accuracy of a standard personality test. We give examples of associations between attributes and Likes and discuss implications for online personalization and privacy.

Private traits and attributes are predictable from digital records of human behavior

PubMed Central

Kosinski, Michal; Stillwell, David; Graepel, Thore

2013-01-01

We show that easily accessible digital records of behavior, Facebook Likes, can be used to automatically and accurately predict a range of highly sensitive personal attributes including: sexual orientation, ethnicity, religious and political views, personality traits, intelligence, happiness, use of addictive substances, parental separation, age, and gender. The analysis presented is based on a dataset of over 58,000 volunteers who provided their Facebook Likes, detailed demographic profiles, and the results of several psychometric tests. The proposed model uses dimensionality reduction for preprocessing the Likes data, which are then entered into logistic/linear regression to predict individual psychodemographic profiles from Likes. The model correctly discriminates between homosexual and heterosexual men in 88% of cases, African Americans and Caucasian Americans in 95% of cases, and between Democrat and Republican in 85% of cases. For the personality trait “Openness,” prediction accuracy is close to the test–retest accuracy of a standard personality test. We give examples of associations between attributes and Likes and discuss implications for online personalization and privacy. PMID:23479631

Local magnitude determinations for intermountain seismic belt earthquakes from broadband digital data

USGS Publications Warehouse

Pechmann, J.C.; Nava, S.J.; Terra, F.M.; Bernier, J.C.

2007-01-01

The University of Utah Seismograph Stations (UUSS) earthquake catalogs for the Utah and Yellowstone National Park regions contain two types of size measurements: local magnitude (ML) and coda magnitude (MC), which is calibrated against ML. From 1962 through 1993, UUSS calculated ML values for southern and central Intermountain Seismic Belt earthquakes using maximum peak-to-peak (p-p) amplitudes on paper records from one to five Wood-Anderson (W-A) seismographs in Utah. For ML determinations of earthquakes since 1994, UUSS has utilized synthetic W-A seismograms from U.S. National Seismic Network and UUSS broadband digital telemetry stations in the region, which numbered 23 by the end of our study period on 30 June 2002. This change has greatly increased the percentage of earthquakes for which ML can be determined. It is now possible to determine ML for all M ???3 earthquakes in the Utah and Yellowstone regions and earthquakes as small as M <1 in some areas. To maintain continuity in the magnitudes in the UUSS earthquake catalogs, we determined empirical ML station corrections that minimize differences between MLs calculated from paper and synthetic W-A records. Application of these station corrections, in combination with distance corrections from Richter (1958) which have been in use at UUSS since 1962, produces ML values that do not show any significant distance dependence. ML determinations for the Utah and Yellowstone regions for 1981-2002 using our station corrections and Richter's distance corrections have provided a reliable data set for recalibrating the MC scales for these regions. Our revised ML values are consistent with available moment magnitude determinations for Intermountain Seismic Belt earthquakes. To facilitate automatic ML measurements, we analyzed the distribution of the times of maximum p-p amplitudes in synthetic W-A records. A 30-sec time window for maximum amplitudes, beginning 5 sec before the predicted Sg time, encompasses 95% of the

Direct-to-digital holography and holovision

DOEpatents

Thomas, Clarence E.; Baylor, Larry R.; Hanson, Gregory R.; Rasmussen, David A.; Voelkl, Edgar; Castracane, James; Simkulet, Michelle; Clow, Lawrence

2000-01-01

Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

Virtual mask digital electron beam lithography

DOEpatents

Baylor, Larry R.; Thomas, Clarence E.; Voelkl, Edgar; Moore, James A.; Simpson, Michael L.; Paulus, Michael J.

1999-01-01

Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

37 CFR 261.3 - Royalty fees for public performances of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES... the period October 28, 1998, through December 31, 2002, royalty rates and fees for eligible digital... Broadcaster licensed to make eligible digital transmissions and/or ephemeral recordings pursuant to licenses...

37 CFR 261.3 - Royalty fees for public performances of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES... the period October 28, 1998, through December 31, 2002, royalty rates and fees for eligible digital... Broadcaster licensed to make eligible digital transmissions and/or ephemeral recordings pursuant to licenses...

37 CFR 261.3 - Royalty fees for public performances of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES... the period October 28, 1998, through December 31, 2002, royalty rates and fees for eligible digital... Broadcaster licensed to make eligible digital transmissions and/or ephemeral recordings pursuant to licenses...

37 CFR 261.3 - Royalty fees for public performances of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES... the period October 28, 1998, through December 31, 2002, royalty rates and fees for eligible digital... Broadcaster licensed to make eligible digital transmissions and/or ephemeral recordings pursuant to licenses...

SOURCE PULSE ENHANCEMENT BY DECONVOLUTION OF AN EMPIRICAL GREEN'S FUNCTION.

USGS Publications Warehouse

Mueller, Charles S.

1985-01-01

Observations of the earthquake source-time function are enhanced if path, recording-site, and instrument complexities can be removed from seismograms. Assuming that a small earthquake has a simple source, its seismogram can be treated as an empirical Green's function and deconvolved from the seismogram of a larger and/or more complex earthquake by spectral division. When the deconvolution is well posed, the quotient spectrum represents the apparent source-time function of the larger event. This study shows that with high-quality locally recorded earthquake data it is feasible to Fourier transform the quotient and obtain a useful result in the time domain. In practice, the deconvolution can be stabilized by one of several simple techniques. Application of the method is given. Refs.

75 FR 16377 - Digital Performance Right in Sound Recordings and Ephemeral Recordings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

...). Petitions to Participate were received from: Intercollegiate Broadcast System, Inc./ Harvard Radio...), respectively, and the references to January 1, 2009, have been deleted. Next, for the reasons stated above in... State. (j) Retention of records. Books and records of a Broadcaster and of the Collective relating to...

A wideband-PCM recorder for the Space Shuttle orbiter

NASA Technical Reports Server (NTRS)

Petit, R. D.

1976-01-01

The Shuttle wideband-PCM recorder accomplishes recording on up to 14 data tracks with analog or digital data inputs. FM multiplexed analog frequencies of up to 2 MHz and digital rates of 1 Mb/s are accommodated at a tape speed of 120 in/s. Recording time in analog mode varies between 4 min for 2 MHz data to 80 min for 100 kHz data. The total digital data storage is 3.44 x 10 to the 9th bits with recording times from 1 hour for 1 Mb/s to 19 hours for 50 Kb/s data in the serial track switching mode. A versatile command decoder and control interface are used for eight primary modes of operation.

High Density Digital Data Storage System

NASA Technical Reports Server (NTRS)

Wright, Kenneth D., II; Gray, David L.; Rowland, Wayne D.

1991-01-01

The High Density Digital Data Storage System was designed to provide a cost effective means for storing real-time data from the field-deployable digital acoustic measurement system. However, the high density data storage system is a standalone system that could provide a storage solution for many other real time data acquisition applications. The storage system has inputs for up to 20 channels of 16-bit digital data. The high density tape recorders presently being used in the storage system are capable of storing over 5 gigabytes of data at overall transfer rates of 500 kilobytes per second. However, through the use of data compression techniques the system storage capacity and transfer rate can be doubled. Two tape recorders have been incorporated into the storage system to produce a backup tape of data in real-time. An analog output is provided for each data channel as a means of monitoring the data as it is being recorded.

Digital Front End for Wide-Band VLBI Science Receiver

NASA Technical Reports Server (NTRS)

Jongeling, Andre; Sigman, Elliott; Navarro, Robert; Goodhart, Charles; Rogstad, Steve; Chandra, Kumar; Finley, Sue; Trinh, Joseph; Soriano, Melissa; White, Les;

Digital terrain tapes: user guide

USGS Publications Warehouse

,

1980-01-01

DMATC's digital terrain tapes are a by-product of the agency's efforts to streamline the production of raised-relief maps. In the early 1960's DMATC developed the Digital Graphics Recorder (DGR) system that introduced new digitizing techniques and processing methods into the field of three-dimensional mapping. The DGR system consisted of an automatic digitizing table and a computer system that recorded a grid of terrain elevations from traces of the contour lines on standard topographic maps. A sequence of computer accuracy checks was performed and then the elevations of grid points not intersected by contour lines were interpolated. The DGR system produced computer magnetic tapes which controlled the carving of plaster forms used to mold raised-relief maps. It was realized almost immediately that this relatively simple tool for carving plaster molds had enormous potential for storing, manipulating, and selectively displaying (either graphically or numerically) a vast number of terrain elevations. As the demand for the digital terrain tapes increased, DMATC began developing increasingly advanced digitizing systems and now operates the Digital Topographic Data Collection System (DTDCS). With DTDCS, two types of data elevations as contour lines and points, and stream and ridge lines are sorted, matched, and resorted to obtain a grid of elevation values for every 0.01 inch on each map (approximately 200 feet on the ground). Undefined points on the grid are found by either linear or or planar interpolation.

EROS Data Center Landsat digital enhancement techniques and imagery availability

USGS Publications Warehouse

Rohde, Wayne G.; Lo, Jinn Kai; Pohl, Russell A.

1978-01-01

The US Geological Survey's EROS Data Center (EDC) is experimenting with the production of digitally enhanced Landsat imagery. Advanced digital image processing techniques are used to perform geometric and radiometric corrections and to perform contrast and edge enhancements. The enhanced image product is produced from digitally preprocessed Landsat computer compatible tapes (CCTs) on a laser beam film recording system. Landsat CCT data have several geometric distortions which are corrected when NASA produces the standard film products. When producing film images from CCT's, geometric correction of the data is required. The EDC Digital Image Enhancement System (EDIES) compensates for geometric distortions introduced by Earth's rotation, variable line length, non-uniform mirror scan velocity, and detector misregistration. Radiometric anomalies such as bad data lines and striping are common to many Landsat film products and are also in the CCT data. Bad data lines or line segments with more than 150 contiguous bad pixels are corrected by inserting data from the previous line in place of the bad data. Striping, caused by variations in detector gain and offset, is removed with a destriping algorithm applied after digitally enhancing the data. Image enhancement is performed by applying a linear contrast stretch and an edge enhancement algorithm. The linear contrast enhancement algorithm is designed to expand digitally the full range of useful data recorded on the CCT over the range of 256 digital counts. This minimizes the effect of atmospheric scattering and saturates the relative brightness of highly reflecting features such as clouds or snow. It is the intent that no meaningful terrain data are eliminated by the digital processing. The edge enhancement algorithm is designed to enhance boundaries between terrain features that exhibit subtle differences in brightness values along edges of features. After the digital data have been processed, data for each Landsat band

eCTG: an automatic procedure to extract digital cardiotocographic signals from digital images.

PubMed

Sbrollini, Agnese; Agostinelli, Angela; Marcantoni, Ilaria; Morettini, Micaela; Burattini, Luca; Di Nardo, Francesco; Fioretti, Sandro; Burattini, Laura

2018-03-01

Cardiotocography (CTG), consisting in the simultaneous recording of fetal heart rate (FHR) and maternal uterine contractions (UC), is a popular clinical test to assess fetal health status. Typically, CTG machines provide paper reports that are visually interpreted by clinicians. Consequently, visual CTG interpretation depends on clinician's experience and has a poor reproducibility. The lack of databases containing digital CTG signals has limited number and importance of retrospective studies finalized to set up procedures for automatic CTG analysis that could contrast visual CTG interpretation subjectivity. In order to help overcoming this problem, this study proposes an electronic procedure, termed eCTG, to extract digital CTG signals from digital CTG images, possibly obtainable by scanning paper CTG reports. eCTG was specifically designed to extract digital CTG signals from digital CTG images. It includes four main steps: pre-processing, Otsu's global thresholding, signal extraction and signal calibration. Its validation was performed by means of the "CTU-UHB Intrapartum Cardiotocography Database" by Physionet, that contains digital signals of 552 CTG recordings. Using MATLAB, each signal was plotted and saved as a digital image that was then submitted to eCTG. Digital CTG signals extracted by eCTG were eventually compared to corresponding signals directly available in the database. Comparison occurred in terms of signal similarity (evaluated by the correlation coefficient ρ, and the mean signal error MSE) and clinical features (including FHR baseline and variability; number, amplitude and duration of tachycardia, bradycardia, acceleration and deceleration episodes; number of early, variable, late and prolonged decelerations; and UC number, amplitude, duration and period). The value of ρ between eCTG and reference signals was 0.85 (P < 10 -560 ) for FHR and 0.97 (P < 10 -560 ) for UC. On average, MSE value was 0.00 for both FHR and UC. No CTG feature

37 CFR 261.3 - Royalty fees for public performances of sound recordings and for ephemeral recordings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Copyrights U.S. COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND... digital transmissions of sound recordings made pursuant to 17 U.S.C. 114(d)(2), and the making of..., Commercial Broadcaster, and Non-CPB, Non-Commercial Broadcaster licensed to make eligible digital...

Low-cost digital dynamic visualization system

NASA Astrophysics Data System (ADS)

Asundi, Anand K.; Sajan, M. R.

1995-05-01

High speed photographic systems like the image rotation camera, the Cranz Schardin camera and the drum camera are typically used for recording and visualization of dynamic events in stress analysis, fluid mechanics, etc. All these systems are fairly expensive and generally not simple to use. Furthermore they are all based on photographic film recording systems requiring time consuming and tedious wet processing of the films. Currently digital cameras are replacing to certain extent the conventional cameras for static experiments. Recently, there is lot of interest in developing and modifying CCD architectures and recording arrangements for dynamic scene analysis. Herein we report the use of a CCD camera operating in the Time Delay and Integration (TDI) mode for digitally recording dynamic scenes. Applications in solid as well as fluid impact problems are presented.

A cross-sectional pilot study to investigate patient attitudes and perception regarding the use of real time digital recording of urological procedures for research and teaching purposes

PubMed Central

Sharp, Gary; Mazzon, Giorgio; Thilagarajah, Ranjan

2015-01-01

Little conclusive evidence exists regarding the best way to educate and evaluate skill acquisition of advanced surgical trainees, despite it being recognised as one of the most important aspects of training. Many laparoscopic trainers have been produced with complex engineering at great cost, but, there seems to be a reluctance to use the most precious entity available to us; the patient. We thus propose the use of real time digital recording of urological procedures for research and teaching purposes. This study was prompted by the lack of literature regarding such issues. A 19 question questionnaire was circulated at a single urology out-patient department (Essex, England) over a 6 month period to evaluate attitudes and perceptions of urological patients on potentially having their procedure digitally recorded for educational and research purposes. 11 patients declined, 187 questionnaires were included in the final analysis. Male patients are more willing to consent than female patients. Older patients resulted to have a higher propensity in being recorded for medical teaching. Greater than 50% believe being recorded is intrusive but the majority do not think privacy is an issue. Lastly, the vast majority require a formal debrief post operatively. Our results show that a percentage of the public are potentially willing to be digitally recorded but many financial and social barriers exist. We have also highlighted areas of possible future research, namely the reluctance behind young urology patients to consent and questions regarding how best to educate possible study participants to ensure proper informed consent is gained. PMID:26005568

Virtual mask digital electron beam lithography

DOEpatents

Baylor, L.R.; Thomas, C.E.; Voelkl, E.; Moore, J.A.; Simpson, M.L.; Paulus, M.J.

1999-04-06

Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made. 5 figs.

Metrological digital audio reconstruction

DOEpatents

Fadeyev,; Vitaliy, Haber [Berkeley, CA; Carl, [Berkeley, CA

2004-02-19

Audio information stored in the undulations of grooves in a medium such as a phonograph record may be reconstructed, with little or no contact, by measuring the groove shape using precision metrology methods coupled with digital image processing and numerical analysis. The effects of damage, wear, and contamination may be compensated, in many cases, through image processing and analysis methods. The speed and data handling capacity of available computing hardware make this approach practical. Two examples used a general purpose optical metrology system to study a 50 year old 78 r.p.m. phonograph record and a commercial confocal scanning probe to study a 1920's celluloid Edison cylinder. Comparisons are presented with stylus playback of the samples and with a digitally re-mastered version of an original magnetic recording. There is also a more extensive implementation of this approach, with dedicated hardware and software.

Maximum Acceleration Recording Circuit

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr.

1995-01-01

Coarsely digitized maximum levels recorded in blown fuses. Circuit feeds power to accelerometer and makes nonvolatile record of maximum level to which output of accelerometer rises during measurement interval. In comparison with inertia-type single-preset-trip-point mechanical maximum-acceleration-recording devices, circuit weighs less, occupies less space, and records accelerations within narrower bands of uncertainty. In comparison with prior electronic data-acquisition systems designed for same purpose, circuit simpler, less bulky, consumes less power, costs and analysis of data recorded in magnetic or electronic memory devices. Circuit used, for example, to record accelerations to which commodities subjected during transportation on trucks.

All-digital full waveform recording photon counting flash lidar

NASA Astrophysics Data System (ADS)

Grund, Christian J.; Harwit, Alex

2010-08-01

Current generation analog and photon counting flash lidar approaches suffer from limitation in waveform depth, dynamic range, sensitivity, false alarm rates, optical acceptance angle (f/#), optical and electronic cross talk, and pixel density. To address these issues Ball Aerospace is developing a new approach to flash lidar that employs direct coupling of a photocathode and microchannel plate front end to a high-speed, pipelined, all-digital Read Out Integrated Circuit (ROIC) to achieve photon-counting temporal waveform capture in each pixel on each laser return pulse. A unique characteristic is the absence of performance-limiting analog or mixed signal components. When implemented in 65nm CMOS technology, the Ball Intensified Imaging Photon Counting (I2PC) flash lidar FPA technology can record up to 300 photon arrivals in each pixel with 100 ps resolution on each photon return, with up to 6000 range bins in each pixel. The architecture supports near 100% fill factor and fast optical system designs (f/#<1), and array sizes to 3000×3000 pixels. Compared to existing technologies, >60 dB ultimate dynamic range improvement, and >104 reductions in false alarm rates are anticipated, while achieving single photon range precision better than 1cm. I2PC significantly extends long-range and low-power hard target imaging capabilities useful for autonomous hazard avoidance (ALHAT), navigation, imaging vibrometry, and inspection applications, and enables scannerless 3D imaging for distributed target applications such as range-resolved atmospheric remote sensing, vegetation canopies, and camouflage penetration from terrestrial, airborne, GEO, and LEO platforms. We discuss the I2PC architecture, development status, anticipated performance advantages, and limitations.

Are minidisc recorders adequate for the study of respiratory sounds?

PubMed

Kraman, Steve S; Wodicka, George R; Kiyokawa, Hiroshi; Pasterkamp, Hans

2002-01-01

Digital audio tape (DAT) recorders have become the de facto gold standard recording devices for lung sounds. Sound recorded on DAT is compact-disk (CD) quality with adequate sensitivity from below 20 Hz to above 20 KHz. However, DAT recorders have drawbacks. Although small, they are relatively heavy, the recording mechanism is complex and delicate, and finding one desired track out of many is inconvenient. A more recent development in portable recording devices is the minidisc (MD) recorder. These recorders are widely available, inexpensive, small and light, rugged, mechanically simple, and record digital data in tracks that may be named and accessed directly. Minidiscs hold as much recorded sound as a compact disk but in about 1/5 of the recordable area. The data compression is achieved by use of a technique known as adaptive transform acoustic coding for minidisc (ATRAC). This coding technique makes decisions about what components of the sound would not be heard by a human listener and discards the digital information that represents these sounds. Most of this compression takes place on sounds above 5.5 KHz. As the intended use of these recorders is the storage and reproduction of music, it is unknown whether ATRAC will discard or distort significant portions of typical lung sound signals. We determined the suitability of MD recorders for respiratory sound research by comparing a variety of normal and pathologic lung sounds that were digitized directly into a computer and also after recording by a DAT recorder and 2 different MD recorders (Sharp and Sony). We found that the frequency spectra and waveforms of respiratory sounds were not distorted in any important way by recording on the two MD recorders tested.

Diagnostic digital cytopathology: Are we ready yet?

PubMed Central

House, Jarret C.; Henderson-Jackson, Evita B.; Johnson, Joseph O.; Lloyd, Mark C.; Dhillon, Jasreman; Ahmad, Nazeel; Hakam, Ardeshir; Khalbuss, Walid E.; Leon, Marino E.; Chhieng, David; Zhang, Xiaohui; Centeno, Barbara A.; Bui, Marilyn M.

2013-01-01

Background: The cytology literature relating to diagnostic accuracy using whole slide imaging is scarce. We studied the diagnostic concordance between glass and digital slides among diagnosticians with different profiles to assess the readiness of adopting digital cytology in routine practice. Materials and Methods: This cohort consisted of 22 de-identified previously screened and diagnosed cases, including non-gynecological and gynecological slides using standard preparations. Glass slides were digitalized using Aperio ScanScope XT (×20 and ×40). Cytopathologists with (3) and without (3) digital experience, cytotechnologists (4) and senior pathology residents (2) diagnosed the digital slides independently first and recorded the results. Glass slides were read and recorded separately 1-3 days later. Accuracy of diagnosis, time to diagnosis and diagnostician's profile were analyzed. Results: Among 22 case pairs and four study groups, correct diagnosis (93% vs. 86%) was established using glass versus digital slides. Both methods more (>95%) accurately diagnosed positive cases than negatives. Cytopathologists with no digital experience were the most accurate in digital diagnosis, even the senior members. Cytotechnologists had the fastest diagnosis time (3 min/digital vs. 1.7 min/glass), but not the best accuracy. Digital time was 1.5 min longer than glass-slide time/per case for cytopathologists and cytotechnologists. Senior pathology residents were slower and less accurate with both methods. Cytopathologists with digital experience ranked 2nd fastest in time, yet last in accuracy for digital slides. Conclusions: There was good overall diagnostic agreement between the digital whole-slide images and glass slides. Although glass slide diagnosis was more accurate and faster, the results of technologists and pathologists with no digital cytology experience suggest that solid diagnostic ability is a strong indicator for readiness of digital adoption. PMID:24392242

Focus and perspective adaptive digital surgical microscope: optomechanical design and experimental implementation

NASA Astrophysics Data System (ADS)

Claus, Daniel; Reichert, Carsten; Herkommer, Alois

2017-05-01

This paper relates to the improvement of conventional surgical stereo microscopy via the application of digital recording devices and adaptive optics. The research is aimed at improving the working conditions of the surgeon during the operation, such that free head movement is possible. The depth clues known from conventional stereo microscopy in interaction with the human eye's functionality, such as convergence, disparity, angular elevation, parallax, and accommodation, are implemented in a digital recording system via adaptive optomechanical components. Two laterally moving pupil apertures have been used mimicking the digital implementation of the eye's vergence and head motion. The natural eye's accommodation is mimicked via the application of a tunable lens. Additionally, another system has been built, which enables tracking the surgeon's eye pupil through a digital displaying stereoscopic microscope to supply the necessary information for steering the recording system. The optomechanical design and experimental results for both systems, digital recording stereoscopic microscope and pupil tracking system, are shown.

Network-linked long-time recording high-speed video camera system

NASA Astrophysics Data System (ADS)

Kimura, Seiji; Tsuji, Masataka

2001-04-01

This paper describes a network-oriented, long-recording-time high-speed digital video camera system that utilizes an HDD (Hard Disk Drive) as a recording medium. Semiconductor memories (DRAM, etc.) are the most common image data recording media with existing high-speed digital video cameras. They are extensively used because of their advantage of high-speed writing and reading of picture data. The drawback is that their recording time is limited to only several seconds because the data amount is very large. A recording time of several seconds is sufficient for many applications. However, a much longer recording time is required in some applications where an exact prediction of trigger timing is hard to make. In the Late years, the recording density of the HDD has been dramatically improved, which has attracted more attention to its value as a long-recording-time medium. We conceived an idea that we would be able to build a compact system that makes possible a long time recording if the HDD can be used as a memory unit for high-speed digital image recording. However, the data rate of such a system, capable of recording 640 X 480 pixel resolution pictures at 500 frames per second (fps) with 8-bit grayscale is 153.6 Mbyte/sec., and is way beyond the writing speed of the commonly used HDD. So, we developed a dedicated image compression system and verified its capability to lower the data rate from the digital camera to match the HDD writing rate.

Bridging the digital divide: mobile access to personal health records among patients with diabetes.

PubMed

Graetz, Ilana; Huang, Jie; Brand, Richard J; Hsu, John; Yamin, Cyrus K; Reed, Mary E

2018-01-01

Some patients lack regular computer access and experience a digital divide that causes them to miss internet-based health innovations. The diffusion of smartphones has increased internet access across the socioeconomic spectrum, and increasing the channels through which patients can access their personal health records (PHRs) could help bridge the divide in PHR use. We examined PHR use through a computer-based Web browser or mobile device. Cross-sectional historical cohort analysis. Among adult patients in the diabetes registry of an integrated healthcare delivery system, we studied the devices used to access their PHR during 2016. Among 267,208 patients with diabetes, 68.1% used the PHR in 2016; 60.6% of all log-ins were via computer and 39.4% were via mobile device. Overall, 63.9% used it from both a computer and mobile device, 29.6% used only a computer, and 6.5% used only a mobile device. After adjustment, patients who were black, Hispanic, or Asian; lived in lower socioeconomic status (SES) neighborhoods; or had lower engagement were all significantly more likely to use the PHR only from a mobile device (P <.05). Patients using the PHR only via mobile device used it less frequently. Mobile-ready PHRs may increase access among patients facing a digital divide in computer use, disproportionately reaching racial/ethnic minorities and lower SES patients. Nonetheless, even with a mobile-optimized and app-accessible PHR, differences in PHR use by race/ethnicity and SES remain. Continued efforts are needed to increase equitable access to PHRs among patients with chronic conditions.

Distributed digital music archives and libraries

NASA Astrophysics Data System (ADS)

Fujinaga, Ichiro

2005-09-01

The main goal of this research program is to develop and evaluate practices, frameworks, and tools for the design and construction of worldwide distributed digital music archives and libraries. Over the last few millennia, humans have amassed an enormous amount of musical information that is scattered around the world. It is becoming abundantly clear that the optimal path for acquisition is to distribute the task of digitizing the wealth of historical and cultural heritage material that exists in analogue formats, which may include books and manuscripts related to music, music scores, photographs, videos, audio tapes, and phonograph records. In order to achieve this goal, libraries, museums, and archives throughout the world, large or small, need well-researched policies, proper guidance, and efficient tools to digitize their collections and to make them available economically. The research conducted within the program addresses unique and imminent challenges posed by the digitization and dissemination of music media. The are four major research projects in progress: development and evaluation of digitization methods for preservation of analogue recordings; optical music recognition using microfilms; design of workflow management system with automatic metadata extraction; and formulation of interlibrary communication strategies.

Use and validation of mirrorless digital single light reflex camera for recording of vitreoretinal surgeries in high definition

PubMed Central

Khanduja, Sumeet; Sampangi, Raju; Hemlatha, B C; Singh, Satvir; Lall, Ashish

2018-01-01

Purpose: The purpose of this study is to describe the use of commercial digital single light reflex (DSLR) for vitreoretinal surgery recording and compare it to standard 3-chip charged coupling device (CCD) camera. Methods: Simultaneous recording was done using Sony A7s2 camera and Sony high-definition 3-chip camera attached to each side of the microscope. The videos recorded from both the camera systems were edited and sequences of similar time frames were selected. Three sequences that selected for evaluation were (a) anterior segment surgery, (b) surgery under direct viewing system, and (c) surgery under indirect wide-angle viewing system. The videos of each sequence were evaluated and rated on a scale of 0-10 for color, contrast, and overall quality Results: Most results were rated either 8/10 or 9/10 for both the cameras. A noninferiority analysis by comparing mean scores of DSLR camera versus CCD camera was performed and P values were obtained. The mean scores of the two cameras were comparable for each other on all parameters assessed in the different videos except of color and contrast in posterior pole view and color on wide-angle view, which were rated significantly higher (better) in DSLR camera. Conclusion: Commercial DSLRs are an affordable low-cost alternative for vitreoretinal surgery recording and may be used for documentation and teaching. PMID:29283133

Use and validation of mirrorless digital single light reflex camera for recording of vitreoretinal surgeries in high definition.

PubMed

Khanduja, Sumeet; Sampangi, Raju; Hemlatha, B C; Singh, Satvir; Lall, Ashish

2018-01-01

The purpose of this study is to describe the use of commercial digital single light reflex (DSLR) for vitreoretinal surgery recording and compare it to standard 3-chip charged coupling device (CCD) camera. Simultaneous recording was done using Sony A7s2 camera and Sony high-definition 3-chip camera attached to each side of the microscope. The videos recorded from both the camera systems were edited and sequences of similar time frames were selected. Three sequences that selected for evaluation were (a) anterior segment surgery, (b) surgery under direct viewing system, and (c) surgery under indirect wide-angle viewing system. The videos of each sequence were evaluated and rated on a scale of 0-10 for color, contrast, and overall quality Results: Most results were rated either 8/10 or 9/10 for both the cameras. A noninferiority analysis by comparing mean scores of DSLR camera versus CCD camera was performed and P values were obtained. The mean scores of the two cameras were comparable for each other on all parameters assessed in the different videos except of color and contrast in posterior pole view and color on wide-angle view, which were rated significantly higher (better) in DSLR camera. Commercial DSLRs are an affordable low-cost alternative for vitreoretinal surgery recording and may be used for documentation and teaching.

Integrating TV/digital data spectrograph system

NASA Technical Reports Server (NTRS)

Duncan, B. J.; Fay, T. D.; Miller, E. R.; Wamsteker, W.; Brown, R. M.; Neely, P. L.

1975-01-01

A 25-mm vidicon camera was previously modified to allow operation in an integration mode for low-light-level astronomical work. The camera was then mated to a low-dispersion spectrograph for obtaining spectral information in the 400 to 750 nm range. A high speed digital video image system was utilized to digitize the analog video signal, place the information directly into computer-type memory, and record data on digital magnetic tape for permanent storage and subsequent analysis.

Determination of broadband moment magnitude (Mwp) for August 11, 2009 Suruga-Bay earthquake (MJMA=6.5)

NASA Astrophysics Data System (ADS)

Tsuboi, S.; Hirshorn, B. F.

2009-12-01

We have determined Mwp for the August 11, 2009 Suruga-Bay earthquake (MJMA=6.5) using broadband seismograms recorded at close epicentral distance stations. We have used two broadband seismograph stations: JHJ2 (epicentral distance 1.9 degree) and FUJ (epicentral distance 0.44 degree). Because of the close epicentral distance of FUJ, the seismogram is clipped at about 10 second after the P-wave arrival. However, it was possible to use the first 10 second of this seismogram to compute Mwp. We get Mwp=6.4 for JHJ2 and 6.8 for FUJ(figure 1). After we apply Whitmore et al (2000)’s correction and average these two stations, we get Mwp=6.6 for this event. The epicentral distance of 0.44 degree for magnitude 6.5 earthquake is marginal to treat this seismogram as far-field. However, considering the aftershock distribution, the fault area seems to be limited to within the Suruga-Bay, which may confirm the fact that Mwp can be successfully computed at FUJ based on the far-field approximation. This result is significant in using Mwp from close epicentral distance seismograms to issue early tsunami warning. A large earthquake with Mw=7.5 (GCMT) occurred in Andaman Island, India, 10 minutes before this Suruga-Bay event. This made it very difficult to estimate Mwp for the Suruga-Bay event from broadband seismograms at teleseismic distances because of the large amplitude of Mw7.5 Andaman Island earthquake. In this case, it is therefore difficult to issue accurate tsunami warnings based on the teleseismic stations. We used broadband seismograms recorded by F-net operated by the National Research Institute for Earth Science and Disaster Prevention.

Digital Dental Photography: A Contemporary Revolution

PubMed Central

Bumb, Dipika

2013-01-01

ABSTRACT Introduction: Photographs are symbolic of memories and with the advent of digital photography it has become much easier to collect them in a second in a more comprehensive and qualitative manner. Technological advancements in the field of digital photography have revolutionized the concept of photography as a powerful medium of expression and communication. It also offers a spectrum of perception, interpretation and execution. Photography and dentistry go hand in hand for revelation of the hidden and overlooked defects in teeth and other parts of the cavity. This article emphasizes on the significance of digital photography in dentistry and guidelines for capturing orofacial structures and radiographs in a more accurate and informative manner. Conclusion: Dental world constitutes of microstructures that have to be recorded in a detailed manner in order to perform patient education, documentation of records and treatment, illustration of lectures, publication and web connectivity of complicated cases. How to cite this article: Desai V, Bumb D. Digital Dental Photography: A Contemporary Revolution. Int J Clin Pediatr Dent 2013;6(3):193-196. PMID:25206221

Digital dental photography: a contemporary revolution.

PubMed

Desai, Vela; Bumb, Dipika

2013-09-01

Photographs are symbolic of memories and with the advent of digital photography it has become much easier to collect them in a second in a more comprehensive and qualitative manner. Technological advancements in the field of digital photography have revolutionized the concept of photography as a powerful medium of expression and communication. It also offers a spectrum of perception, interpretation and execution. Photography and dentistry go hand in hand for revelation of the hidden and overlooked defects in teeth and other parts of the cavity. This article emphasizes on the significance of digital photography in dentistry and guidelines for capturing orofacial structures and radiographs in a more accurate and informative manner. Dental world constitutes of microstructures that have to be recorded in a detailed manner in order to perform patient education, documentation of records and treatment, illustration of lectures, publication and web connectivity of complicated cases. How to cite this article: Desai V, Bumb D. Digital Dental Photography: A Contemporary Revolution. Int J Clin Pediatr Dent 2013;6(3):193-196.

47 CFR 32.2212 - Digital electronic switching.

Code of Federal Regulations, 2012 CFR

2012-10-01

... shall include the original cost of digital electronic switching equipment used to provide circuit... electronic switching equipment used to provide both circuit and packet switching shall be recorded in the... 47 Telecommunication 2 2012-10-01 2012-10-01 false Digital electronic switching. 32.2212 Section...

47 CFR 32.2212 - Digital electronic switching.

Code of Federal Regulations, 2014 CFR

2014-10-01

... shall include the original cost of digital electronic switching equipment used to provide circuit... electronic switching equipment used to provide both circuit and packet switching shall be recorded in the... 47 Telecommunication 2 2014-10-01 2014-10-01 false Digital electronic switching. 32.2212 Section...

47 CFR 32.2212 - Digital electronic switching.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall include the original cost of digital electronic switching equipment used to provide circuit... electronic switching equipment used to provide both circuit and packet switching shall be recorded in the... 47 Telecommunication 2 2011-10-01 2011-10-01 false Digital electronic switching. 32.2212 Section...

47 CFR 32.2212 - Digital electronic switching.

Code of Federal Regulations, 2010 CFR

2010-10-01

... shall include the original cost of digital electronic switching equipment used to provide circuit... electronic switching equipment used to provide both circuit and packet switching shall be recorded in the... 47 Telecommunication 2 2010-10-01 2010-10-01 false Digital electronic switching. 32.2212 Section...

47 CFR 32.2212 - Digital electronic switching.

Code of Federal Regulations, 2013 CFR

2013-10-01

... shall include the original cost of digital electronic switching equipment used to provide circuit... electronic switching equipment used to provide both circuit and packet switching shall be recorded in the... 47 Telecommunication 2 2013-10-01 2013-10-01 false Digital electronic switching. 32.2212 Section...

Novel Tool for Complete Digitization of Paper Electrocardiography Data.

PubMed

Ravichandran, Lakshminarayan; Harless, Chris; Shah, Amit J; Wick, Carson A; Mcclellan, James H; Tridandapani, Srini

We present a Matlab-based tool to convert electrocardiography (ECG) information from paper charts into digital ECG signals. The tool can be used for long-term retrospective studies of cardiac patients to study the evolving features with prognostic value. To perform the conversion, we: 1) detect the graphical grid on ECG charts using grayscale thresholding; 2) digitize the ECG signal based on its contour using a column-wise pixel scan; and 3) use template-based optical character recognition to extract patient demographic information from the paper ECG in order to interface the data with the patients' medical record. To validate the digitization technique: 1) correlation between the digital signals and signals digitized from paper ECG are performed and 2) clinically significant ECG parameters are measured and compared from both the paper-based ECG signals and the digitized ECG. The validation demonstrates a correlation value of 0.85-0.9 between the digital ECG signal and the signal digitized from the paper ECG. There is a high correlation in the clinical parameters between the ECG information from the paper charts and digitized signal, with intra-observer and inter-observer correlations of 0.8-0.9 (p < 0.05), and kappa statistics ranging from 0.85 (inter-observer) to 1.00 (intra-observer). The important features of the ECG signal, especially the QRST complex and the associated intervals, are preserved by obtaining the contour from the paper ECG. The differences between the measures of clinically important features extracted from the original signal and the reconstructed signal are insignificant, thus highlighting the accuracy of this technique. Using this type of ECG digitization tool to carry out retrospective studies on large databases, which rely on paper ECG records, studies of emerging ECG features can be performed. In addition, this tool can be used to potentially integrate digitized ECG information with digital ECG analysis programs and with the patient

[Constructing 3-dimensional colorized digital dental model assisted by digital photography].

PubMed

Ye, Hong-qiang; Liu, Yu-shu; Liu, Yun-song; Ning, Jing; Zhao, Yi-jiao; Zhou, Yong-sheng

2016-02-18

To explore a method of constructing universal 3-dimensional (3D) colorized digital dental model which can be displayed and edited in common 3D software (such as Geomagic series), in order to improve the visual effect of digital dental model in 3D software. The morphological data of teeth and gingivae were obtained by intra-oral scanning system (3Shape TRIOS), constructing 3D digital dental models. The 3D digital dental models were exported as STL files. Meanwhile, referring to the accredited photography guide of American Academy of Cosmetic Dentistry (AACD), five selected digital photographs of patients'teeth and gingivae were taken by digital single lens reflex camera (DSLR) with the same exposure parameters (except occlusal views) to capture the color data. In Geomagic Studio 2013, after STL file of 3D digital dental model being imported, digital photographs were projected on 3D digital dental model with corresponding position and angle. The junctions of different photos were carefully trimmed to get continuous and natural color transitions. Then the 3D colorized digital dental model was constructed, which was exported as OBJ file or WRP file which was a special file for software of Geomagic series. For the purpose of evaluating the visual effect of the 3D colorized digital model, a rating scale on color simulation effect in views of patients'evaluation was used. Sixteen patients were recruited and their scores on colored and non-colored digital dental models were recorded. The data were analyzed using McNemar-Bowker test in SPSS 20. Universal 3D colorized digital dental model with better color simulation was constructed based on intra-oral scanning and digital photography. For clinical application, the 3D colorized digital dental models, combined with 3D face images, were introduced into 3D smile design of aesthetic rehabilitation, which could improve the patients' cognition for the esthetic digital design and virtual prosthetic effect. Universal 3D colorized

The application of digital image plane holography technology to identify Chinese herbal medicine

NASA Astrophysics Data System (ADS)

Wang, Huaying; Guo, Zhongjia; Liao, Wei; Zhang, Zhihui

2012-03-01

In this paper, the imaging technology of digital image plane holography to identify the Chinese herbal medicine is studied. The optical experiment system of digital image plane holography which is the special case of pre-magnification digital holography was built. In the record system, one is an object light by using plane waves which illuminates the object, and the other one is recording hologram by using spherical light wave as reference light. There is a Micro objective lens behind the object. The second phase factor which caus ed by the Micro objective lens can be eliminated by choosing the proper position of the reference point source when digital image plane holography is recorded by spherical light. In this experiment, we use the Lygodium cells and Onion cells as the object. The experiment results with Lygodium cells and Onion cells show that digital image plane holography avoid the process of finding recording distance by using auto-focusing approach, and the phase information of the object can be reconstructed more accurately. The digital image plane holography is applied to the microscopic imaging of cells more effectively, and it is suit to apply for the identify of Chinese Herbal Medicine. And it promotes the application of digital holographic in practice.

Sounds of earthquakes in West Bohemia: analysis of sonic and infrasonic records

NASA Astrophysics Data System (ADS)

Fischer, Tomáš; Vilhelm, Jan; Kuna, Václav; Chum, Jaroslav; Horálek, Josef

2013-04-01

Earthquake sounds are usually observed during the occurrence of small earthquakes. The observations of audible manifestations of earthquakes date back to the ancient age and have been recently analyzed in more detail based both on macroseismic observations and audio recordings. In most cases the earthquake sounds resemble low-frequency underground thundering that is generated by seismic-acoustic conversion of P and SV waves at the earth surface. This is also supported by the fact that earthquake sounds usually precede shaking caused by S-waves. The less frequent are explosion-type sounds whose origin remains unclear. We analyze the observations of sounds associating the occurrence of earthquake swarms in the area of West Bohemia/Vogtland, Central Europe. Macroseismic data include 250 reports of sounds with 90% thundering and 10% of explosions. Additional data consist of sonic and infrasonic records acquired by microphones and microbarographs at seismic stations in the area. All the sonic and infrasonic records correspond to sounds of the thunder type; no explosions were recorded. Comparison of these records enabled to determine the seismic wave - air pressure transfer function. The measurements using a 3D microphone array confirm that in the epicentral area the sonic wave is propagating subvertically. We also compared the coda of seismograms and sonic records. It turned out that additional to seismo-acoustic coupling, a later acoustic wave of thunder type arrives at the observation site whose arrival time corresponds to sonic propagation from the epicenter. We analyse the possible generation mechanisms of this type of sonic wave.

Dental digital radiographic imaging.

PubMed

Mauriello, S M; Platin, E

2001-01-01

Radiographs are an important adjunct to providing oral health care for the total patient. Historically, radiographic images have been produced using film-based systems. However, in recent years, with the arrival of new technologies, many practitioners have begun to incorporate digital radiographic imaging into their practices. Since dental hygienists are primarily responsible for exposing and processing radiographs in the provision of dental hygiene care, it is imperative that they become knowledgeable on the use and application of digital imaging in patient care and record keeping. The purpose of this course is to provide a comprehensive overview of digital radiography in dentistry. Specific components addressed are technological features, diagnostic software, advantages and disadvantages, technique procedures, and legal implications.

Evaluating video digitizer errors

NASA Astrophysics Data System (ADS)

Peterson, C.

2016-01-01

Analog output video cameras remain popular for recording meteor data. Although these cameras uniformly employ electronic detectors with fixed pixel arrays, the digitization process requires resampling the horizontal lines as they are output in order to reconstruct the pixel data, usually resulting in a new data array of different horizontal dimensions than the native sensor. Pixel timing is not provided by the camera, and must be reconstructed based on line sync information embedded in the analog video signal. Using a technique based on hot pixels, I present evidence that jitter, sync detection, and other timing errors introduce both position and intensity errors which are not present in cameras which internally digitize their sensors and output the digital data directly.

Experimental research of digital holographic microscopic measuring

NASA Astrophysics Data System (ADS)

Zhu, Xueliang; Chen, Feifei; Li, Jicheng

2013-06-01

Digital holography is a new imaging technique, which is developed on the base of optical holography, Digital processing, and Computer techniques. It is using CCD instead of the conventional silver to record hologram, and then reproducing the 3D contour of the object by the way of computer simulation. Compared with the traditional optical holographic, the whole process is of simple measuring, lower production cost, faster the imaging speed, and with the advantages of non-contact real-time measurement. At present, it can be used in the fields of the morphology detection of tiny objects, micro deformation analysis, and biological cells shape measurement. It is one of the research hot spot at home and abroad. This paper introduced the basic principles and relevant theories about the optical holography and Digital holography, and researched the basic questions which influence the reproduce images in the process of recording and reconstructing of the digital holographic microcopy. In order to get a clear digital hologram, by analyzing the optical system structure, we discussed the recording distance and of the hologram. On the base of the theoretical studies, we established a measurement and analyzed the experimental conditions, then adjusted them to the system. To achieve a precise measurement of tiny object in three-dimension, we measured MEMS micro device for example, and obtained the reproduction three-dimensional contour, realized the three dimensional profile measurement of tiny object. According to the experiment results consider: analysis the reference factors between the zero-order term and a pair of twin-images by the choice of the object light and the reference light and the distance of the recording and reconstructing and the characteristics of reconstruction light on the measurement, the measurement errors were analyzed. The research result shows that the device owns certain reliability.

Computerized tomography using video recorded fluoroscopic images

NASA Technical Reports Server (NTRS)

Kak, A. C.; Jakowatz, C. V., Jr.; Baily, N. A.; Keller, R. A.

1975-01-01

A computerized tomographic imaging system is examined which employs video-recorded fluoroscopic images as input data. By hooking the video recorder to a digital computer through a suitable interface, such a system permits very rapid construction of tomograms.

[Digital electroencephalography in brain death diagnostics : Technical requirements and results of a survey on the compatibility with medical guidelines of digital EEG systems from providers in Germany].

PubMed

Walter, U; Noachtar, S; Hinrichs, H

2018-02-01

The guidelines of the German Medical Association and the German Society for Clinical Neurophysiology and Functional Imaging (DGKN) require a high procedural and technical standard for electroencephalography (EEG) as an ancillary method for diagnosing the irreversible cessation of brain function (brain death). Nowadays, digital EEG systems are increasingly being applied in hospitals. So far it is unclear to what extent the digital EEG systems currently marketed in Germany meet the guidelines for diagnosing brain death. In the present article, the technical und safety-related requirements for digital EEG systems and the EEG documentation for diagnosing brain death are described in detail. On behalf of the DGKN, the authors sent out a questionnaire to all identified distributors of digital EEG systems in Germany with respect to the following technical demands: repeated recording of the calibration signals during an ongoing EEG recording, repeated recording of all electrode impedances during an ongoing EEG recording, assessability of intrasystem noise and galvanic isolation of measurement earthing from earthing conductor (floating input). For 15 of the identified 20 different digital EEG systems the specifications were provided by the distributors (among them all distributors based in Germany). All of these EEG systems are provided with a galvanic isolation (floating input). The internal noise can be tested with all systems; however, some systems do not allow repeated recording of the calibration signals and/or the electrode impedances during an ongoing EEG recording. The majority but not all of the currently available digital EEG systems offered for clinical use are eligible for use in brain death diagnostics as per German guidelines.

High-Density Digital Data Storage System

NASA Technical Reports Server (NTRS)

Wright, Kenneth D.; Gray, David L.

1995-01-01

High-density digital data storage system designed for cost-effective storage of large amounts of information acquired during experiments. System accepts up to 20 channels of 16-bit digital data with overall transfer rates of 500 kilobytes per second. Data recorded on 8-millimeter magnetic tape in cartridges, each capable of holding up to five gigabytes of data. Each cartridge mounted on one of two tape drives. Operator chooses to use either or both of drives. One drive used for primary storage of data while other can be used to make a duplicate record of data. Alternatively, other drive serves as backup data-storage drive when primary one fails.

Data Mining for Tectonic Tremor in a Large Global Seismogram Database using Preprocessed Data Quality Measurements

NASA Astrophysics Data System (ADS)

Rasor, B. A.; Brudzinski, M. R.

2013-12-01

The collision of plates at subduction zones yields the potential for disastrous earthquakes, yet the processes that lead up to these events are still largely unclear and make them difficult to forecast. Recent advancements in seismic monitoring has revealed subtle ground vibrations termed tectonic tremor that occur as long-lived swarms of narrow bandwidth activity, different from local earthquakes of comparable amplitude that create brief signals of broader, higher frequency. The close proximity of detected tremor events to the lower edge of the seismogenic zone along the subduction interface suggests a potential triggering relationship between tremor and megathrust earthquakes. Most tremor catalogs are constructed with detection methods that involve an exhausting download of years of high sample rate seismic data, as well as large computation power to process the large data volume and identify temporal patterns of tremor activity. We have developed a tremor detection method that employs the underutilized Quality Analysis Control Kit (QuACK), originally built to analyze station performance and identify instrument problems across the many seismic networks that contribute data to one of the largest seismogram databases in the world (IRIS DMC). The QuACK dataset stores seismogram amplitudes at a wide range of frequencies calculated every hour since 2005 for most stations achieved in the IRIS DMC. Such a preprocessed dataset is advantageous considering several tremor detection techniques use hourly seismic amplitudes in the frequency band where tremor is most active (2-5 Hz) to characterize the time history of tremor. Yet these previous detection techniques have relied on downloading years of 40-100 sample-per-second data to make the calculations, which typically takes several days on a 36-node high-performance cluster to calculate the amplitude variations for a single station. Processing times are even longer for a recently developed detection algorithm that utilize

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility prepare a solid state recorder for installation in a protective enclosure as part of the prelaunch preparations for STS-82, the second Hubble Space Telescope servicing mission. The digital solid state recorder will replace one of three engineering/science tape recorders on Hubble. The solid state recorder has no moving parts to wear out. It also is more flexible than a reel-to-reel recorder and can store 10 times as much data. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

NASA Image and Video Library

1997-01-16

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility prepare a solid state recorder for installation in a protective enclosure as part of the prelaunch preparations for STS-82, the second Hubble Space Telescope servicing mission. The digital solid state recorder will replace one of three engineering/science tape recorders on Hubble. The solid state recorder has no moving parts to wear out. It also is more flexible than a reel-to-reel recorder and can store 10 times as much data. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

37 CFR 370.2 - Notice of use of sound recordings under statutory license.

Code of Federal Regulations, 2011 CFR

2011-07-01

... BOARD, LIBRARY OF CONGRESS NOTICE AND RECORDKEEPING REQUIREMENTS FOR STATUTORY LICENSES NOTICE AND... is either commencing digital transmissions of sound recordings or making ephemeral phonorecords of... categories under which the Service will be making digital transmissions of sound recordings: Preexisting...

37 CFR 370.2 - Notice of use of sound recordings under statutory license.

Code of Federal Regulations, 2014 CFR

2014-07-01

... BOARD, LIBRARY OF CONGRESS NOTICE AND RECORDKEEPING REQUIREMENTS FOR STATUTORY LICENSES NOTICE AND... is either commencing digital transmissions of sound recordings or making ephemeral phonorecords of... categories under which the Service will be making digital transmissions of sound recordings: Preexisting...

37 CFR 370.2 - Notice of use of sound recordings under statutory license.

Code of Federal Regulations, 2010 CFR

2010-07-01

... BOARD, LIBRARY OF CONGRESS NOTICE AND RECORDKEEPING REQUIREMENTS FOR STATUTORY LICENSES NOTICE AND... is either commencing digital transmissions of sound recordings or making ephemeral phonorecords of... categories under which the Service will be making digital transmissions of sound recordings: Preexisting...

37 CFR 370.2 - Notice of use of sound recordings under statutory license.

Code of Federal Regulations, 2013 CFR

2013-07-01

... BOARD, LIBRARY OF CONGRESS NOTICE AND RECORDKEEPING REQUIREMENTS FOR STATUTORY LICENSES NOTICE AND... is either commencing digital transmissions of sound recordings or making ephemeral phonorecords of... categories under which the Service will be making digital transmissions of sound recordings: Preexisting...

37 CFR 370.2 - Notice of use of sound recordings under statutory license.

Code of Federal Regulations, 2012 CFR

2012-07-01

... BOARD, LIBRARY OF CONGRESS NOTICE AND RECORDKEEPING REQUIREMENTS FOR STATUTORY LICENSES NOTICE AND... is either commencing digital transmissions of sound recordings or making ephemeral phonorecords of... categories under which the Service will be making digital transmissions of sound recordings: Preexisting...

First Results of Digital Topography Applied to Macromolecular Crystals

NASA Technical Reports Server (NTRS)

Lovelace, J.; Soares, A. S.; Bellamy, H.; Sweet, R. M.; Snell, E. H.; Borgstahl, G.

2004-01-01

An inexpensive digital CCD camera was used to record X-ray topographs directly from large imperfect crystals of cubic insulin. The topographs recorded were not as detailed as those which can be measured with film or emulsion plates but do show great promise. Six reflections were recorded using a set of finely spaced stills encompassing the rocking curve of each reflection. A complete topographic reflection profile could be digitally imaged in minutes. Interesting and complex internal structure was observed by this technique.The CCD chip used in the camera has anti-blooming circuitry and produced good data quality even when pixels became overloaded.

Digitization of Nuclear Explosion Seismograms from the Former Soviet Union

DTIC Science & Technology

2015-03-30

others in terms of frequency-amplitude-phase ( fap ) response files. Approved for public release; distribution is unlimited. T ab le 1 . I ns tr um en...responses are given in terms of poles and zeros, or fap (frequency-amplitude-phase) in CSS 3.0 relational database tables, specifically via .sensor and

Use of globally unique identifiers (GUIDs) to link herbarium specimen records to physical specimens.

PubMed

Nelson, Gil; Sweeney, Patrick; Gilbert, Edward

2018-02-01

With the advent of the U.S. National Science Foundation's Advancing Digitization of Biodiversity Collections program and related worldwide digitization initiatives, the rate of herbarium specimen digitization in the United States has expanded exponentially. As the number of electronic herbarium records proliferates, the importance of linking these records to the physical specimens they represent as well as to related records from other sources will intensify. Although a rich and diverse literature has developed over the past decade that addresses the use of specimen identifiers for facilitating linking across the internet, few implementable guidelines or recommended practices for herbaria have been advanced. Here we review this literature with the express purpose of distilling a specific set of recommendations especially tailored to herbarium specimen digitization, curation, and management. We argue that associating globally unique identifiers (GUIDs) with physical herbarium specimens and including these identifiers in all electronic records about those specimens is essential to effective digital data curation. We also address practical applications for ensuring these associations.

Measuring Trust: Standards for Trusted Digital Repositories

ERIC Educational Resources Information Center

Dryden, Jean

2011-01-01

Ensuring the long-term preservation and use of born-digital and digitized records of enduring value has preoccupied archivists and their cultural heritage siblings for several decades. The professional literature of the 1980s and 1990s bemoans the challenges posed by rapid technological change (and the concomitant obsolescence of hardware and…

Astigmatism compensation in digital holographic microscopy using complex-amplitude correlation

NASA Astrophysics Data System (ADS)

Tamrin, Khairul Fikri; Rahmatullah, Bahbibi; Samuri, Suzani Mohamad

2015-07-01

Digital holographic microscopy (DHM) is a promising tool for a three-dimensional imaging of microscopic particles. It offers the possibility of wavefront processing by manipulating amplitude and phase of the recorded digital holograms. With a view to compensate for aberration in the reconstructed particle images, this paper discusses a new approach of aberration compensation based on complex amplitude correlation and the use of a priori information. The approach is applied to holograms of microscopic particles flowing inside a cylindrical micro-channel recorded using an off-axis digital holographic microscope. The approach results in improvements in the image and signal qualities.

Location of early aftershocks of the 2004 Mid-Niigata Prefecture Earthquake (M = 6.8) in central Japan using seismogram envelopes as templates

NASA Astrophysics Data System (ADS)

Kosuga, M.

2013-12-01

The location of early aftershocks is very important to obtain information of mainshock fault, however, it is often difficult due to the long-lasting coda wave of mainshock and successive occurrence of afterrshocks. To overcome this difficulty, we developed a method of location using seismogram envelopes as templates, and applied the method to the early aftershock sequence of the 2004 Mid-Niigata Prefecture (Chuetsu) Earthquake (M = 6.8) in central Japan. The location method composes of three processes. The first process is the calculation of cross-correlation coefficients between a continuous (target) and template envelopes. We prepare envelopes by taking the logarithm of root-mean-squared amplitude of band-pass filtered seismograms. We perform the calculation by shifting the time window to obtain a set of cross-correlation values for each template. The second process is the event detection (selection of template) and magnitude estimate. We search for the events in descending order of cross-correlation in a time window excluding the dead times around the previously detected events. Magnitude is calculated by the amplitude ratio of target and template envelopes. The third process is the relative event location to the selected template. We applied this method to the Chuetsu earthquake, a large inland earthquake with extensive aftershock activity. The number of detected events depends on the number of templates, frequency range, and the threshold value of cross-correlation. We set the threshold as 0.5 by referring to the histogram of cross-correlation. During a period of one-hour from the mainshock, we could detect more events than the JMA catalog. The location of events is generally near the catalog location. Though we should improve the methods of relative location and magnitude estimate, we conclude that the proposed method works adequately even just after the mainshock of large inland earthquake. Acknowledgement: We thank JMA, NIED, and the University of Tokyo for

Refractometry of melanocyte cell nuclei using optical scatter images recorded by digital Fourier microscopy.

PubMed

Seet, Katrina Y T; Nieminen, Timo A; Zvyagin, Andrei V

2009-01-01

The cell nucleus is the dominant optical scatterer in the cell. Neoplastic cells are characterized by cell nucleus polymorphism and polychromism-i.e., the nuclei exhibits an increase in the distribution of both size and refractive index. The relative size parameter, and its distribution, is proportional to the product of the nucleus size and its relative refractive index and is a useful discriminant between normal and abnormal (cancerous) cells. We demonstrate a recently introduced holographic technique, digital Fourier microscopy (DFM), to provide a sensitive measure of this relative size parameter. Fourier holograms were recorded and optical scatter of individual scatterers were extracted and modeled with Mie theory to determine the relative size parameter. The relative size parameter of individual melanocyte cell nuclei were found to be 16.5+/-0.2, which gives a cell nucleus refractive index of 1.38+/-0.01 and is in good agreement with previously reported data. The relative size parameters of individual malignant melanocyte cell nuclei are expected to be greater than 16.5.

Preserving the Digital Record of Science and Engineering: The Challenge of New Forms of Grey Literature

ERIC Educational Resources Information Center

Musser, Linda

2016-01-01

Research communications today are largely conducted by digital means. At this time, however, only a small percentage of these digital communiques are archived and preserved for future use. This article provides an overview of the challenge of this digital grey literature, a brief overview of digital archiving, and the role librarians and…

Oldies, Music Rights, and the Digital Age

ERIC Educational Resources Information Center

McDonald, Peter

2005-01-01

The author discusses the issue of copyright, oldies, and digital preservation. He examines efforts being made to create digital sound repositories for music record prior to 1970 at such places as Yale, Syracuse, the New York Public Library, and the Library of Congress. These issues are explored by contrasting the music industry's concern for loss…

Confidentiality Protection of Digital Health Records in Cloud Computing.

PubMed

Chen, Shyh-Wei; Chiang, Dai Lun; Liu, Chia-Hui; Chen, Tzer-Shyong; Lai, Feipei; Wang, Huihui; Wei, Wei

2016-05-01

Electronic medical records containing confidential information were uploaded to the cloud. The cloud allows medical crews to access and manage the data and integration of medical records easily. This data system provides relevant information to medical personnel and facilitates and improve electronic medical record management and data transmission. A structure of cloud-based and patient-centered personal health record (PHR) is proposed in this study. This technique helps patients to manage their health information, such as appointment date with doctor, health reports, and a completed understanding of their own health conditions. It will create patients a positive attitudes to maintain the health. The patients make decision on their own for those whom has access to their records over a specific span of time specified by the patients. Storing data in the cloud environment can reduce costs and enhance the share of information, but the potential threat of information security should be taken into consideration. This study is proposing the cloud-based secure transmission mechanism is suitable for multiple users (like nurse aides, patients, and family members).

Capturing Your Sound: A Guide to Live Recording

ERIC Educational Resources Information Center

Clukey, Tim

2006-01-01

Public performances highlight months of work, but because most school groups cannot afford to hire professional recording engineers, these events are rarely suitably preserved. With small investments of time and equipment, music teachers can create an enduring recording of these fleeting performances. Many of today's digital recording tools are…

28 CFR 75.6 - Statement describing location of books and records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Statement describing location of books... of books and records. (a) Any producer of any book, magazine, periodical, film, videotape, digitally... the book, magazine, periodical, film, videotape, digitally- or computer-manipulated image, digital...

28 CFR 75.6 - Statement describing location of books and records.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Statement describing location of books... of books and records. (a) Any producer of any book, magazine, periodical, film, videotape, digitally... the book, magazine, periodical, film, videotape, digitally- or computer-manipulated image, digital...

28 CFR 75.6 - Statement describing location of books and records.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Statement describing location of books... of books and records. (a) Any producer of any book, magazine, periodical, film, videotape, digitally... the book, magazine, periodical, film, videotape, digitally- or computer-manipulated image, digital...

28 CFR 75.6 - Statement describing location of books and records.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Statement describing location of books... of books and records. (a) Any producer of any book, magazine, periodical, film, videotape, digitally... the book, magazine, periodical, film, videotape, digitally- or computer-manipulated image, digital...

Novel Tool for Complete Digitization of Paper Electrocardiography Data

PubMed Central

Harless, Chris; Shah, Amit J.; Wick, Carson A.; Mcclellan, James H.

2013-01-01

Objective: We present a Matlab-based tool to convert electrocardiography (ECG) information from paper charts into digital ECG signals. The tool can be used for long-term retrospective studies of cardiac patients to study the evolving features with prognostic value. Methods and procedures: To perform the conversion, we: 1) detect the graphical grid on ECG charts using grayscale thresholding; 2) digitize the ECG signal based on its contour using a column-wise pixel scan; and 3) use template-based optical character recognition to extract patient demographic information from the paper ECG in order to interface the data with the patients' medical record. To validate the digitization technique: 1) correlation between the digital signals and signals digitized from paper ECG are performed and 2) clinically significant ECG parameters are measured and compared from both the paper-based ECG signals and the digitized ECG. Results: The validation demonstrates a correlation value of 0.85–0.9 between the digital ECG signal and the signal digitized from the paper ECG. There is a high correlation in the clinical parameters between the ECG information from the paper charts and digitized signal, with intra-observer and inter-observer correlations of 0.8–0.9 \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$({\\rm p}<{0.05})$\\end{document}, and kappa statistics ranging from 0.85 (inter-observer) to 1.00 (intra-observer). Conclusion: The important features of the ECG signal, especially the QRST complex and the associated intervals, are preserved by obtaining the contour from the paper ECG. The differences between the measures of clinically important features extracted from the original signal and the reconstructed signal are insignificant, thus highlighting the accuracy of this technique

In Digital Age, Sunshine Laws Turn Hazy

ERIC Educational Resources Information Center

Fleming, Nora

2013-01-01

School board members are struggling to interpret laws that govern where and how they do business now that as many conversations take place digitally as they do face to face. As online and digital interactions increase, so too does public concern that officials have more opportunities to violate state open-meetings and open-records laws meant to…

21 CFR 1311.55 - Requirements for systems used to process digitally signed orders.

Code of Federal Regulations, 2012 CFR

2012-04-01

... identification and password combination or biometric authentication to access the private key. Activation data... source. (9) The system must archive the digitally signed orders and any other records required in part... linked records for orders signed with a CSOS digital certificate must meet the following requirements: (1...

21 CFR 1311.55 - Requirements for systems used to process digitally signed orders.

Code of Federal Regulations, 2013 CFR

2013-04-01

... identification and password combination or biometric authentication to access the private key. Activation data... source. (9) The system must archive the digitally signed orders and any other records required in part... linked records for orders signed with a CSOS digital certificate must meet the following requirements: (1...

21 CFR 1311.55 - Requirements for systems used to process digitally signed orders.

Code of Federal Regulations, 2011 CFR

2011-04-01

... identification and password combination or biometric authentication to access the private key. Activation data... source. (9) The system must archive the digitally signed orders and any other records required in part... linked records for orders signed with a CSOS digital certificate must meet the following requirements: (1...

21 CFR 1311.55 - Requirements for systems used to process digitally signed orders.

Code of Federal Regulations, 2014 CFR

2014-04-01

... identification and password combination or biometric authentication to access the private key. Activation data... source. (9) The system must archive the digitally signed orders and any other records required in part... linked records for orders signed with a CSOS digital certificate must meet the following requirements: (1...

Camera Ready: Capturing a Digital History of Chester

ERIC Educational Resources Information Center

Lehman, Kathy

2008-01-01

Armed with digital cameras, voice recorders, and movie cameras, students from Thomas Dale High School in Chester, Virginia, have been exploring neighborhoods, interviewing residents, and collecting memories of their hometown. In this article, the author describes "Digital History of Chester", a project for creating a commemorative DVD.…

Educational Video Recording and Editing for The Hand Surgeon

PubMed Central

Rehim, Shady A.; Chung, Kevin C.

2016-01-01

Digital video recordings are increasingly used across various medical and surgical disciplines including hand surgery for documentation of patient care, resident education, scientific presentations and publications. In recent years, the introduction of sophisticated computer hardware and software technology has simplified the process of digital video production and improved means of disseminating large digital data files. However, the creation of high quality surgical video footage requires basic understanding of key technical considerations, together with creativity and sound aesthetic judgment of the videographer. In this article we outline the practical steps involved with equipment preparation, video recording, editing and archiving as well as guidance for the choice of suitable hardware and software equipment. PMID:25911212

Authentication of digital video evidence

NASA Astrophysics Data System (ADS)

Beser, Nicholas D.; Duerr, Thomas E.; Staisiunas, Gregory P.

2003-11-01

In response to a requirement from the United States Postal Inspection Service, the Technical Support Working Group tasked The Johns Hopkins University Applied Physics Laboratory (JHU/APL) to develop a technique tha will ensure the authenticity, or integrity, of digital video (DV). Verifiable integrity is needed if DV evidence is to withstand a challenge to its admissibility in court on the grounds that it can be easily edited. Specifically, the verification technique must detect additions, deletions, or modifications to DV and satisfy the two-part criteria pertaining to scientific evidence as articulated in Daubert et al. v. Merrell Dow Pharmaceuticals Inc., 43 F3d (9th Circuit, 1995). JHU/APL has developed a prototype digital video authenticator (DVA) that generates digital signatures based on public key cryptography at the frame level of the DV. Signature generation and recording is accomplished at the same time as DV is recorded by the camcorder. Throughput supports the consumer-grade camcorder data rate of 25 Mbps. The DVA software is implemented on a commercial laptop computer, which is connected to a commercial digital camcorder via the IEEE-1394 serial interface. A security token provides agent identification and the interface to the public key infrastructure (PKI) that is needed for management of the public keys central to DV integrity verification.

GSFC specification electronic data processing magnetic recording tape

NASA Technical Reports Server (NTRS)

Tinari, D. F.; Perry, J. L.

1980-01-01

The design requirements are given for magnetic oxide coated, electronic data processing tape, wound on reels. Magnetic recording tape types covered by this specification are intended for use on digital tape transports using the Non-Return-to-Zero-change-on-ones (NRZI) recording method for recording densities up to and including 800 characters per inch (cpi) and the Phase-Encoding (PE) recording method for a recording density of 1600 cpi.

A Digital Video System for Observing and Recording Occultations

NASA Astrophysics Data System (ADS)

Barry, M. A. Tony; Gault, Dave; Pavlov, Hristo; Hanna, William; McEwan, Alistair; Filipović, Miroslav D.

2015-09-01

Stellar occultations by asteroids and outer solar system bodies can offer ground based observers with modest telescopes and camera equipment the opportunity to probe the shape, size, atmosphere, and attendant moons or rings of these distant objects. The essential requirements of the camera and recording equipment are: good quantum efficiency and low noise; minimal dead time between images; good horological faithfulness of the image timestamps; robustness of the recording to unexpected failure; and low cost. We describe an occultation observing and recording system which attempts to fulfil these requirements and compare the system with other reported camera and recorder systems. Five systems have been built, deployed, and tested over the past three years, and we report on three representative occultation observations: one being a 9 ± 1.5 s occultation of the trans-Neptunian object 28978 Ixion (m v =15.2) at 3 seconds per frame; one being a 1.51 ± 0.017 s occultation of Deimos, the 12 km diameter satellite of Mars, at 30 frames per second; and one being a 11.04 ± 0.4 s occultation, recorded at 7.5 frames per second, of the main belt asteroid 361 Havnia, representing a low magnitude drop (Δm v = ~0.4) occultation.

Saudi Arabian seismic deep-refraction profiles; final project report

USGS Publications Warehouse

Healy, J.H.; Mooney, W.D.; Blank, H.R.; Gettings, M.E.; Kohler, W.M.; Lamson, R.J.; Leone, L.E.

1983-01-01

In February 1978 a seismic deep-refraction profile was recorded by the U.S. Geological Survey along a 1000-km line across the Arabian Shield in western Saudi Arabia. The line begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, leads southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan (Tihamat-Asir), and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, including 19 in the Farasan Islands. Six shot points were used: five on land, with most charges placed below the water table in drill holes, and one at sea, with charges placed on the sea floor and detonated from a ship. Slightly more than 61 metric tons of explosives were used in 19 discrete firings. Seismic energy was recorded by 100 newly-developed portable seismic stations deployed in approximately 200 km-long arrays for each firing. Each station consisted of a standard 2-Hz vertical component geophone coupled to a self-contained analog recording instrument equipped with a magnetic-tape cassette. In this final report, we fully document the field and data-processing procedures and present the final seismogram data set as both a digital magnetic tape and as record sections for each shot point. Record sections include a normalized set of seismograms, reduced at 6 km/s, and a true-amplitude set, reduced at 8 km/s, which have been adjusted for amplifier gain, individual shot size, and distance from the shot point. Appendices give recorder station and shot information, digital data set descriptions, computer program listings, arrival times used in the interpretation, and a bibliography of reports published as a result of this project. We used two-dimensional ray-tracing techniques in the data analysis, and our interpretation is based primarily on horizontally layered models. The Arabian Shield is composed, to first-order, of two layers, each about 20 km

Digital super-resolution holographic data storage based on Hermitian symmetry for achieving high areal density.

PubMed

Nobukawa, Teruyoshi; Nomura, Takanori

2017-01-23

Digital super-resolution holographic data storage based on Hermitian symmetry is proposed to store digital data in a tiny area of a medium. In general, reducing a recording area with an aperture leads to the improvement in the storage capacity of holographic data storage. Conventional holographic data storage systems however have a limitation in reducing a recording area. This limitation is called a Nyquist size. Unlike the conventional systems, our proposed system can overcome the limitation with the help of a digital holographic technique and digital signal processing. Experimental result shows that the proposed system can record and retrieve a hologram in a smaller area than the Nyquist size on the basis of Hermitian symmetry.

Estimation of seismic velocity changes at different depths associated with the 2014 Northern Nagano Prefecture earthquake, Japan ( M W 6.2) by joint interferometric analysis of NIED Hi-net and KiK-net records

NASA Astrophysics Data System (ADS)

Sawazaki, Kaoru; Saito, Tatsuhiko; Ueno, Tomotake; Shiomi, Katsuhiko

2016-12-01

To estimate the seismic velocity changes at different depths associated with a large earthquake, we apply passive image interferometry to two types of seismograms: KiK-net vertical pairs of earthquake records and Hi-net continuous borehole data. We compute the surface/borehole deconvolution waveform (DCW) of seismograms recorded by a KiK-net station and the autocorrelation function (ACF) of ambient noise recorded by a collocated Hi-net station, 26 km from the epicenter of the 2014 Northern Nagano Prefecture earthquake, Japan ( M W 6.2). Because the deeper KiK-net sensor and the Hi-net sensor are collocated at 150 m depth, and another KiK-net sensor is located at the surface directly above the borehole sensors, we can measure shallow (<150 m depth) and deep (>150 m depth) velocity changes separately. The sensitivity of the ACF to the velocity changes in the deeper zone is evaluated by a numerical wave propagation simulation. We detect relative velocity changes of -3.1 and -1.4% in the shallow and deep zones, respectively, within 1 week of the mainshock. The relative velocity changes recover to -1.9 and -1.1%, respectively, during the period between 1 week and 4 months after the mainshock. The observed relative velocity reductions can be attributed to dynamic strain changes due to the strong ground motion, rather than static strain changes due to coseismic deformation by the mainshock. The speed of velocity recovery may be faster in the shallow zone than in the deep zone because the recovery speed is controlled by initial damage in the medium. This recovery feature is analogous to the behavior of slow dynamics observed in rock experiments.

37 CFR 255.4 - Definition of digital phonorecord delivery.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 37 Patents, Trademarks, and Copyrights 1 2014-07-01 2014-07-01 false Definition of digital phonorecord delivery. 255.4 Section 255.4 Patents, Trademarks, and Copyrights U.S. COPYRIGHT OFFICE, LIBRARY... UNDER COMPULSORY LICENSE FOR MAKING AND DISTRIBUTING PHONO-RECORDS § 255.4 Definition of digital...

36 CFR 1235.48 - What documentation must agencies transfer with electronic records?

Code of Federal Regulations, 2010 CFR

2010-07-01

... digital geospatial data files can include metadata that conforms to the Federal Geographic Data Committee's Content Standards for Digital Geospatial Metadata, as specified in Executive Order 12906 of April... number (301) 837-2903 for digital photographs and metadata, or the National Archives and Records...

36 CFR 1235.48 - What documentation must agencies transfer with electronic records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... digital geospatial data files can include metadata that conforms to the Federal Geographic Data Committee's Content Standards for Digital Geospatial Metadata, as specified in Executive Order 12906 of April... number (301) 837-2903 for digital photographs and metadata, or the National Archives and Records...

36 CFR 1235.48 - What documentation must agencies transfer with electronic records?

Code of Federal Regulations, 2011 CFR

2011-07-01

... digital geospatial data files can include metadata that conforms to the Federal Geographic Data Committee's Content Standards for Digital Geospatial Metadata, as specified in Executive Order 12906 of April... number (301) 837-2903 for digital photographs and metadata, or the National Archives and Records...

36 CFR 1235.48 - What documentation must agencies transfer with electronic records?

Code of Federal Regulations, 2014 CFR

2014-07-01

... digital geospatial data files can include metadata that conforms to the Federal Geographic Data Committee's Content Standards for Digital Geospatial Metadata, as specified in Executive Order 12906 of April... number (301) 837-2903 for digital photographs and metadata, or the National Archives and Records...

Establishment of borehole observation system and high resolution seismic studies in the western part of the main Marmara Fault in the frame of MARSite Project

NASA Astrophysics Data System (ADS)

Ozel, A.; Yalcinkaya, E.; Guralp, C. M.; Tunc, S.; Meral Ozel, N.

2013-12-01

The main objective of this study is to install a multi-parameter borehole system and surface array as close to the main Marmara Fault (MMF) in the western Marmara Sea as possible, and measure continuously the evolution of the state of the fault zone surrounding the MMF and to detect any anomaly or change which may occur before earthquakes by making use of the data from the arrays already running in the eastern part of the Marmara Sea. The multi-parameter borehole system will be composed of very wide dynamic range and stable borehole (VBB) broad band seismic sensor, and incorporate 3-D strain meter, tilt meter, and temperature and local hydrostatic pressure measuring devices. The borehole seismic station will use the latest update technologies and design ideas to record 'Earth tides' signals to the smallest magnitude -3 events. Bringing face to face the seismograms of microearthquakes recorded by borehole and surface instruments portrays quite different contents. The shorter recording duration and nearly flat frequency spectrum up to the Nyquist frequencies of borehole records are faced with longer recording duration and rapid decay of spectral amplitudes at higher frequencies of a surface seismogram. The main causative of the observed differences are near surface geology effects that mask most of the source related information the seismograms include, and that give rise to scattering, generating longer duration seismograms. In view of these circumstances, studies on microearthquakes employing surface seismograms may bring on misleading results. Particularly, the works on earthquake physics and nucleation process of earthquakes requires elaborate analysis of tiny events. It is obvious from the studies on the nucleation process of the 1999 earthquake that tens of minutes before the major rupture initiate noteworthy microearthquake activity happened. The starting point of the 1999 rupture was a site of swarm activity noticed a few decades prior the main shock

Predicting Strong Ground-Motion Seismograms for Magnitude 9 Cascadia Earthquakes Using 3D Simulations with High Stress Drop Sub-Events

NASA Astrophysics Data System (ADS)

Frankel, A. D.; Wirth, E. A.; Stephenson, W. J.; Moschetti, M. P.; Ramirez-Guzman, L.

2015-12-01

We have produced broadband (0-10 Hz) synthetic seismograms for magnitude 9.0 earthquakes on the Cascadia subduction zone by combining synthetics from simulations with a 3D velocity model at low frequencies (≤ 1 Hz) with stochastic synthetics at high frequencies (≥ 1 Hz). We use a compound rupture model consisting of a set of M8 high stress drop sub-events superimposed on a background slip distribution of up to 20m that builds relatively slowly. The 3D simulations were conducted using a finite difference program and the finite element program Hercules. The high-frequency (≥ 1 Hz) energy in this rupture model is primarily generated in the portion of the rupture with the M8 sub-events. In our initial runs, we included four M7.9-8.2 sub-events similar to those that we used to successfully model the strong ground motions recorded from the 2010 M8.8 Maule, Chile earthquake. At periods of 2-10 s, the 3D synthetics exhibit substantial amplification (about a factor of 2) for sites in the Puget Lowland and even more amplification (up to a factor of 5) for sites in the Seattle and Tacoma sedimentary basins, compared to rock sites outside of the Puget Lowland. This regional and more localized basin amplification found from the simulations is supported by observations from local earthquakes. There are substantial variations in the simulated M9 time histories and response spectra caused by differences in the hypocenter location, slip distribution, down-dip extent of rupture, coherence of the rupture front, and location of sub-events. We examined the sensitivity of the 3D synthetics to the velocity model of the Seattle basin. We found significant differences in S-wave focusing and surface wave conversions between a 3D model of the basin from a spatially-smoothed tomographic inversion of Rayleigh-wave phase velocities and a model that has an abrupt southern edge of the Seattle basin, as observed in seismic reflection profiles.

The digital eczema centre utrecht.

PubMed

van Os-Medendorp, Harmieke; van Veelen, Carien; Hover, Maaike; Eland-de Kok, Petra; Bruijnzeel-Koomen, Carla; Sonnevelt, Gert-Jan; Mensing, Geert; Pasmans, Suzanne

2010-01-01

The University Medical Centre Utrecht (UMC Utrecht) has developed an eczema portal that combines e-consulting, monitoring and self-management training by a dermatology nurse online for patients and parents of young children with atopic dermatitis (AD). Patient satisfaction with the portal was high. It could be extended to become a Digital Eczema Centre for multidisciplinary collaboration between health-care providers from different locations and the patient. Before starting the construction of the Digital Eczema Centre, the feasibility was examined by carrying out a business case analysis. The purposes, strength and weaknesses showed that the Digital Eczema Centre offered opportunities to improve care for patients with AD. The financial analysis resulted in a medium/best case scenario with a positive result of euro50-240,000 over a period of five years. We expect that the Digital Eczema Centre will increase the accessibility and quality of care. The web-based patient record and the digital chain-of-care promote the involvement of patients, parents and multidisciplinary teams as well as the continuity and coordination of care.

Strike Up the Score: Deriving Searchable and Playable Digital Formats from Sheet Music; Smart Objects and Open Archives; Building the Archives of the Future: Advanced in Preserving Electronic Records at the National Archives and Records Administration; From the Digitized to the Digital Library.

ERIC Educational Resources Information Center

Choudhury, G. Sayeed; DiLauro, Tim; Droettboom, Michael; Fujinaga, Ichiro; MacMillan, Karl; Nelson, Michael L.; Maly, Kurt; Thibodeau, Kenneth; Thaller, Manfred

2001-01-01

These articles describe the experiences of the Johns Hopkins University library in digitizing their collection of sheet music; motivation for buckets, Smart Object, Dumb Archive (SODA) and the Open Archives Initiative (OAI), and initial experiences using them in digital library (DL) testbeds; requirements for archival institutions, the National…

[Video recording system of endoscopic procedures for digital forensics].

PubMed

Endo, Chiaki; Sakurada, A; Kondo, T

2009-07-01

Recently, endoscopic procedures including surgery, intervention, and examination have been widely performed. Medical practitioners are required to record the procedures precisely in order to check the procedures retrospectively and to get the legally reliable record. Medical Forensic System made by KS Olympus Japan offers 2 kinds of movie and patient's data, such as heart rate, blood pressure, and Spo, which are simultaneously recorded. We installed this system into the bronchoscopy room and have experienced its benefit. Under this system, we can get bronchoscopic image, bronchoscopy room view, and patient's data simultaneously. We can check the quality of the bronchoscopic procedures retrospectively, which is useful for bronchoscopy staff training. Medical Forensic System should be installed in any kind of endoscopic procedures.

Fast reconstruction of off-axis digital holograms based on digital spatial multiplexing.

PubMed

Sha, Bei; Liu, Xuan; Ge, Xiao-Lu; Guo, Cheng-Shan

2014-09-22

A method for fast reconstruction of off-axis digital holograms based on digital multiplexing algorithm is proposed. Instead of the existed angular multiplexing (AM), the new method utilizes a spatial multiplexing (SM) algorithm, in which four off-axis holograms recorded in sequence are synthesized into one SM function through multiplying each hologram with a tilted plane wave and then adding them up. In comparison with the conventional methods, the SM algorithm simplifies two-dimensional (2-D) Fourier transforms (FTs) of four N*N arrays into a 1.25-D FTs of one N*N arrays. Experimental results demonstrate that, using the SM algorithm, the computational efficiency can be improved and the reconstructed wavefronts keep the same quality as those retrieved based on the existed AM method. This algorithm may be useful in design of a fast preview system of dynamic wavefront imaging in digital holography.

Fused off-axis object illumination direct-to-digital holography with a plurality of illumination sources

DOEpatents

Price, Jeffery R.; Bingham, Philip R.

2005-11-08

Systems and methods are described for rapid acquisition of fused off-axis illumination direct-to-digital holography. A method of recording a plurality of off-axis object illuminated spatially heterodyne holograms, each of the off-axis object illuminated spatially heterodyne holograms including spatially heterodyne fringes for Fourier analysis, includes digitally recording, with a first illumination source of an interferometer, a first off-axis object illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; and digitally recording, with a second illumination source of the interferometer, a second off-axis object illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis.

The Profiles in Science Digital Library: Behind the Scenes.

PubMed

Gallagher, Marie E; Moffatt, Christie

2012-01-01

This demonstration shows the Profiles in Science ® digital library. Profiles in Science contains digitized selections from the personal manuscript collections of prominent biomedical researchers, medical practitioners, and those fostering science and health. The Profiles in Science Web site is the delivery mechanism for content derived from the digital library system. The system is designed according to our basic principles for digital library development [1]. The digital library includes the rules and software used for digitizing items, creating and editing database records and performing quality control as well as serving the digital content to the public. Among the types of data managed by the digital library are detailed item-level, collection-level and cross-collection metadata, digitized photographs, papers, audio clips, movies, born-digital electronic files, optical character recognized (OCR) text, and annotations (see Figure 1). The digital library also tracks the status of each item, including digitization quality, sensitivity of content, and copyright. Only items satisfying all required criteria are released to the public through the World Wide Web. External factors have influenced all aspects of the digital library's infrastructure.

Laser color recording unit

NASA Astrophysics Data System (ADS)

Jung, E.

1984-05-01

A color recording unit was designed for output and control of digitized picture data within computer controlled reproduction and picture processing systems. In order to get a color proof picture of high quality similar to a color print, together with reduced time and material consumption, a photographic color film material was exposed pixelwise by modulated laser beams of three wavelengths for red, green and blue light. Components of different manufacturers for lasers, acousto-optic modulators and polygon mirrors were tested, also different recording methods as (continuous tone mode or screened mode and with a drum or flatbed recording principle). Besides the application for the graphic arts - the proof recorder CPR 403 with continuous tone color recording with a drum scanner - such a color hardcopy peripheral unit with large picture formats and high resolution can be used in medicine, communication, and satellite picture processing.

Aspects of quality insurance in digitizing historical climate data in Germany

NASA Astrophysics Data System (ADS)

Mächel, H.; Behrends, J.; Kapala, A.

2010-09-01

This contribution presents some of the problems and offers solutions regarding the digitization of historical meteorological data, and explains the need for verification and quality control. For the assessment of changes in climate extremes, long-term and complete observational records with a high temporal resolution are needed. However, in most countries, including Germany, such climate data are rare. Therefore, in 2005, the German Weather Service launched a project to inventory and digitize historical daily climatic records in cooperation with the Meteorological Institute of the University of Bonn. Experience with Optical Character Recognition (OCR) show that it is only of very limited use, as even printed tables (e.g. yearbooks) are not sufficiently recognized (10-20% error). In hand-written records, the recognition rate is about 50%. By comparing daily and monthly values, it is possible to auto-detect errors, but they can not be automatically corrected, since there is often more than one error per month. These erroneous data must then be controlled manually on an individual basis, which is significantly more error-prone than direct manual input. Therefore, both precipitation and climate station data are digitized manually. The time required to digitize one year of precipitation data (including the recording of daily precipitation amount and type, snow amount and type, and weather events such as thunder storms, fog, etc.) is equivalent to about five hours for one year of data. This involves manually typing, reformatting and quality control of the digitized data, as well as creating a digital photograph. For climate stations with three observations per day, the working time is 30-50 hours for one year of data, depending on the number of parameters and the condition of the documents. Several other problems occur when creating the digital records from historical observational data, some of which are listed below. Older records often used varying units and different

High-speed single-pixel digital holography

NASA Astrophysics Data System (ADS)

González, Humberto; Martínez-León, Lluís.; Soldevila, Fernando; Araiza-Esquivel, Ma.; Tajahuerce, Enrique; Lancis, Jesús

2017-06-01

The complete phase and amplitude information of biological specimens can be easily determined by phase-shifting digital holography. Spatial light modulators (SLMs) based on liquid crystal technology, with a frame-rate around 60 Hz, have been employed in digital holography. In contrast, digital micro-mirror devices (DMDs) can reach frame rates up to 22 kHz. A method proposed by Lee to design computer generated holograms (CGHs) permits the use of such binary amplitude modulators as phase-modulation devices. Single-pixel imaging techniques record images by sampling the object with a sequence of micro-structured light patterns and using a simple photodetector. Our group has reported some approaches combining single-pixel imaging and phase-shifting digital holography. In this communication, we review these techniques and present the possibility of a high-speed single-pixel phase-shifting digital holography system with phase-encoded illumination. This system is based on a Mach-Zehnder interferometer, with a DMD acting as the modulator for projecting the sampling patterns on the object and also being used for phase-shifting. The proposed sampling functions are phaseencoded Hadamard patterns generated through a Lee hologram approach. The method allows the recording of the complex amplitude distribution of an object at high speed on account of the high frame rates of the DMD. Reconstruction may take just a few seconds. Besides, the optical setup is envisaged as a true adaptive system, which is able to measure the aberration induced by the optical system in the absence of a sample object, and then to compensate the wavefront in the phasemodulation stage.

Acceleration Recorder and Playback Module

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr. (Inventor)

1996-01-01

The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

Acceleration recorder and playback module

NASA Astrophysics Data System (ADS)

Bozeman, Richard J., Jr.

1994-11-01

The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

Acceleration recorder and playback module

NASA Astrophysics Data System (ADS)

Bozeman, Richard J., Jr.

1992-09-01

The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

Acceleration recorder and playback module

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr. (Inventor)

1994-01-01

The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

37 CFR 383.3 - Royalty fees for public performances of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY.... Royalty rates for the public performance of sound recordings by eligible digital transmissions made over a...

Does amplitude scaling of ground motion records result in biased nonlinear structural drift responses?

USGS Publications Warehouse

Luco, N.; Bazzurro, P.

2007-01-01

Limitations of the existing earthquake ground motion database lead to scaling of records to obtain seismograms consistent with a ground motion target for structural design and evaluation. In the engineering seismology community, acceptable limits for 'legitimate' scaling vary from one (no scaling allowed) to 10 or more. The concerns expressed by detractors of scaling are mostly based on the knowledge of, for example, differences in ground motion characteristics for different earthquake magnitude-distance (Mw-Rclose) scenarios, and much less on their effects on structures. At the other end of the spectrum, proponents have demonstrated that scaling is not only legitimate but also useful for assessing structural response statistics for Mw-Rclose scenarios. Their studies, however, have not investigated more recent purposes of scaling and have not always drawn conclusions for a wide spectrum of structural vibration periods and strengths. This article investigates whether scaling of records randomly selected from an Mw-Rclose bin (or range) to a target fundamental-mode spectral acceleration (Sa) level introduces bias in the expected nonlinear structural drift response of both single-degree-of-freedom oscillators and one multi-degree-of-freedom building. The bias is quantified relative to unscaled records from the target Mw-Rclose bin that are 'naturally' at the target Sa level. We consider scaling of records from the target Mw-Rclose bin and from other Mw-Rclose bins. The results demonstrate that scaling can indeed introduce a bias that, for the most part, ca be explained by differences between the elastic response spectra of the scaled versus unscaled records. Copyright ?? 2007 John Wiley & Sons, Ltd.

The DigitalSeed: An Interactive Toy for Investigating Plants

ERIC Educational Resources Information Center

Cherubini, Mauro; Gash, Hugh; McCloughlin, Thomas

2008-01-01

Plant growth, development and reproduction are fundamental concepts in biology; yet there is a recorded lack of motivation for young people to grapple with these concepts. Here we present the "DigitalSeed" toy for making investigations around these concepts more accessible to children through hands-on digital interaction. This is part of an…

Mars digital terrain model

NASA Technical Reports Server (NTRS)

Wu, Sherman S. C.; Howington, Annie-Elpis

1987-01-01

The Mars Digital Terrain Model (DTM) is the result of a new project to: (1) digitize the series of 1:2,000,000-scale topographic maps of Mars, which are being derived photogrammetically under a separate project, and (2) reformat the digital contour information into rasters of elevation that can be readily registered with the Digital Image Model (DIM) of Mars. Derivation of DTM's involves interpolation of elevation values into 1/64-degree resolution and transformation of them to a sinusoidal equal-area projection. Digital data are produced in blocks corresponding with the coordinates of the original 1:2,000,000-scale maps, i.e., the dimensions of each block in the equatorial belt are 22.5 deg of longitude and 15 deg of latitude. This DTM is not only compatible with the DIM, but it can also be registered with other data such as geologic units or gravity. It will be the most comprehensive record of topographic information yet compiled for the Martian surface. Once the DTM's are established, any enhancement of Mars topographic information made with updated data, such as data from the planned Mars Observer Mission, will be by mathematical transformation of the DTM's, eliminating the need for recompilation.

Distributing digital video to multiple computers

PubMed Central

Murray, James A.

2004-01-01

Video is an effective teaching tool, and live video microscopy is especially helpful in teaching dissection techniques and the anatomy of small neural structures. Digital video equipment is more affordable now and allows easy conversion from older analog video devices. I here describe a simple technique for bringing digital video from one camera to all of the computers in a single room. This technique allows students to view and record the video from a single camera on a microscope. PMID:23493464

36 CFR § 1235.48 - What documentation must agencies transfer with electronic records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... digital geospatial data files can include metadata that conforms to the Federal Geographic Data Committee's Content Standards for Digital Geospatial Metadata, as specified in Executive Order 12906 of April... number (301) 837-2903 for digital photographs and metadata, or the National Archives and Records...

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility install a solid state recorder into a transport assembly in its protective enclosure as part of the prelaunch preparations for STS-82, the second Hubble Space Telescope servicing mission. The digital solid state recorder will replace one of three engineering/science tape recorders on Hubble. The solid state recorder has no moving parts to wear out. It also is more flexible than a reel-to-reel recorder and can store 10 times as much data. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

NASA Image and Video Library

1997-01-16

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility install a solid state recorder into a transport assembly in its protective enclosure as part of the prelaunch preparations for STS-82, the second Hubble Space Telescope servicing mission. The digital solid state recorder will replace one of three engineering/science tape recorders on Hubble. The solid state recorder has no moving parts to wear out. It also is more flexible than a reel-to-reel recorder and can store 10 times as much data. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

Digital methods for the history of psychology: Introduction and resources.

PubMed

Fox Lee, Shayna

2016-02-01

At the York University Digital History of Psychology Laboratory, we have been working on projects that explore what digital methodologies have to offer historical research in our field. This piece provides perspective on the history and theory of digital history, as well as introductory resources for those who are curious about incorporating these methods into their own work. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Digitizing and Preserving Law School Recordings: A Duke Law Case Study

ERIC Educational Resources Information Center

White, Hollie; Bordo, Miguel; Chen, Sean

2015-01-01

Written as a case study, this article outlines Duke Law School Information Services' video digitization, preservation, and access initiative. This article begins with a discussion of the case study environment and the cross-departmental evaluation of in-house video production and processing workflows. The in-house preservation reformatting process…

NASA Records Database

NASA Technical Reports Server (NTRS)

Callac, Christopher; Lunsford, Michelle

2005-01-01

The NASA Records Database, comprising a Web-based application program and a database, is used to administer an archive of paper records at Stennis Space Center. The system begins with an electronic form, into which a user enters information about records that the user is sending to the archive. The form is smart : it provides instructions for entering information correctly and prompts the user to enter all required information. Once complete, the form is digitally signed and submitted to the database. The system determines which storage locations are not in use, assigns the user s boxes of records to some of them, and enters these assignments in the database. Thereafter, the software tracks the boxes and can be used to locate them. By use of search capabilities of the software, specific records can be sought by box storage locations, accession numbers, record dates, submitting organizations, or details of the records themselves. Boxes can be marked with such statuses as checked out, lost, transferred, and destroyed. The system can generate reports showing boxes awaiting destruction or transfer. When boxes are transferred to the National Archives and Records Administration (NARA), the system can automatically fill out NARA records-transfer forms. Currently, several other NASA Centers are considering deploying the NASA Records Database to help automate their records archives.

A digital future for the history of psychology?

PubMed

Green, Christopher D

2016-08-01

This article discusses the role that digital approaches to the history of psychology are likely to play in the near future. A tentative hierarchy of digital methods is proposed. A few examples are briefly described: a digital repository, a simple visualization using ready-made online database and tools, and more complex visualizations requiring the assembly of the database and, possibly, the analytic tools by the researcher. The relationship of digital history to the old "New Economic History" (Cliometrics) is considered. The question of whether digital history and traditional history need be at odds or, instead, might complement each other is woven throughout. The rapidly expanding territory of digital humanistic research outside of psychology is briefly discussed. Finally, the challenging current employment trends in history and the humanities more broadly are considered, along with the role that digital skills might play in mitigating those factors for prospective academic workers. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

On digital cinema and watermarking

NASA Astrophysics Data System (ADS)

van Leest, Arno; Haitsma, Jaap; Kalker, Ton

2003-06-01

The illegal copying of movies in the cinema is now common practice. Although the quality is fairly low, the economic impact of these illegal copies can be enormous. Philips' digital cinema watermarking scheme is designed for the upcoming digital cinema format and will assist content owners and distributors with tracing the origin of illegal copies. In this paper we consider this watermarking scheme in more detail. A characteristic of this watermarking scheme is that it only exploits the temporal axis to insert a watermark. It is therefore inherently robust to geometrical distortions, a necessity for surviving illegal copying by camcorder recording. Moreover, the scheme resists frame rate conversions resulting from a frame rate mismatch between the camcorder and the projector. The watermarking scheme has been tested in a 'real' digital cinema environment with good results.

DataPlay's mobile recording technology

NASA Astrophysics Data System (ADS)

Bell, Bernard W., Jr.

2002-01-01

A small rotating memory device which utilizes optical prerecorded and writeable technology to provide a mobile recording technology solution for digital cameras, cell phones, music players, PDA's, and hybrid multipurpose devices have been developed. This solution encompasses writeable, read only, and encrypted storage media.

37 CFR 383.3 - Royalty fees for public performances of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY... eligible digital transmissions made over a Service pursuant to 17 U.S.C. 114, and for ephemeral recordings...

37 CFR 383.3 - Royalty fees for public performances of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY... eligible digital transmissions made over a Service pursuant to 17 U.S.C. 114, and for ephemeral recordings...

37 CFR 383.3 - Royalty fees for public performances of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY... eligible digital transmissions made over a Service pursuant to 17 U.S.C. 114, and for ephemeral recordings...

37 CFR 383.3 - Royalty fees for public performances of sound recordings and the making of ephemeral recordings.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Trademarks, and Copyrights COPYRIGHT ROYALTY BOARD, LIBRARY OF CONGRESS RATES AND TERMS FOR STATUTORY... eligible digital transmissions made over a Service pursuant to 17 U.S.C. 114, and for ephemeral recordings...

[Challenges of Digital Medicine].

PubMed

Blaser, Jürg

2018-06-01

Challenges of Digital Medicine Abstract. Digitization is increasingly covering more and more sectors, including medicine. To ensure medical operation 365 × 24 hours, progressively more human and financial resources are necessary. The transformation of patient histories from paper into electronic patient records focused initially on documentation. Today, hospital information systems are increasingly used as a platform for the communication of all professionals involved in the patient process - in Switzerland, however, so far without providing patients direct access to their data. Digititizing processes intend to increase efficiency, but also to enhance clinical and administrative decision support and quality assurance. The introduction of the electronic patient record in Switzerland in 2020 is expected to provide cross-company, more complete documentation of patient care. Multimorbid patients, often treated in different institutions and by different specialists, should benefit from this in particular. Advances in artificial intelligence offer new opportunities in medicine. Challenges include ensuring reliable data protection, and better interoperability of the systems involved. Semantically structured, machine-readable data exchange is a necessity for both networked services and internationally competitive research.

78 FR 23053 - Determination of Rates and Terms for Preexisting Subscription Services and Satellite Digital...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

...The Copyright Royalty Judges are announcing their final determination of the rates and terms for the digital transmission of sound recordings and the reproduction of ephemeral recordings by preexisting subscription services and preexisting satellite digital audio radio services for the period beginning January 1, 2013, and ending on December 31, 2017.

Fuzzy topological digital space and their properties of flat electroencephalography in epilepsy disease

NASA Astrophysics Data System (ADS)

Muzafar Shah, Mazlina; Fatah Wahab, Abdul

2017-09-01

There are an abnormal electric activities or irregular interference in brain of epilepsy patient. Then a sensor will be put in patient’s scalp to measure and records all electric activities in brain. The result of the records known as Electroencephalography (EEG). The EEG has been transfer to flat EEG because it’s easier to analyze. In this study, the uncertainty in flat EEG data will be considered as fuzzy digital space. The purpose of this research is to show that the flat EEG is fuzzy topological digital space. Therefore, the main focus for this research is to introduce fuzzy topological digital space concepts with their properties such as neighbourhood, interior and closure by using fuzzy set digital concept and Chang’s fuzzy topology approach. The product fuzzy topology digital also will be shown. By introduce this concept, the data in flat EEG can considering having fuzzy topology digital properties and can identify the area in fuzzy digital space that has been affected by epilepsy seizure in epileptic patient’s brain.

Endoscopic digital holography for measuring flows in opaque vessels

NASA Astrophysics Data System (ADS)

Arévalo, Laura; Palero, Virginia; Lobera, Julia; Arroyo, M. Pilar

2012-10-01

In this work a new application of digital holography for the study of cardio vascular diseases is proposed. The simultaneous measurement of the blood flow velocity and the vein wall deformation can be obtained by combining digital holography and endoscopy. Endoscopes are used for the illumination and recording of digital holograms inside a vein model. Two different endoscopes have been used in different vein models in order to test the technique performance. Preliminary results of flow velocity and wall deformation are presented.

Stabilometer Computerized Analog Recording System for Studying Gross Motor Skill Learning

ERIC Educational Resources Information Center

Chasey, William C., Jr.; And Others

1976-01-01

The stabilometer computerized analog recording system (SCARS) provides for storing analog and digital information on a single channel audio tape recorder at lower cost and greater versatility than other systems. (MB)

Authenticity examination of compressed audio recordings using detection of multiple compression and encoders' identification.

PubMed

Korycki, Rafal

2014-05-01

Since the appearance of digital audio recordings, audio authentication has been becoming increasingly difficult. The currently available technologies and free editing software allow a forger to cut or paste any single word without audible artifacts. Nowadays, the only method referring to digital audio files commonly approved by forensic experts is the ENF criterion. It consists in fluctuation analysis of the mains frequency induced in electronic circuits of recording devices. Therefore, its effectiveness is strictly dependent on the presence of mains signal in the recording, which is a rare occurrence. Recently, much attention has been paid to authenticity analysis of compressed multimedia files and several solutions were proposed for detection of double compression in both digital video and digital audio. This paper addresses the problem of tampering detection in compressed audio files and discusses new methods that can be used for authenticity analysis of digital recordings. Presented approaches consist in evaluation of statistical features extracted from the MDCT coefficients as well as other parameters that may be obtained from compressed audio files. Calculated feature vectors are used for training selected machine learning algorithms. The detection of multiple compression covers up tampering activities as well as identification of traces of montage in digital audio recordings. To enhance the methods' robustness an encoder identification algorithm was developed and applied based on analysis of inherent parameters of compression. The effectiveness of tampering detection algorithms is tested on a predefined large music database consisting of nearly one million of compressed audio files. The influence of compression algorithms' parameters on the classification performance is discussed, based on the results of the current study. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The upper mantle beneath the Cascade Range: A comparison with the Gulf of California

NASA Technical Reports Server (NTRS)

Walck, M. C.

1984-01-01

Seismograms from 22 earthquakes along the northeast Pacific rim recorded in southern California form the data set for investigation of the upper mantle beneath the Cascade Range-Juan de Fuca region, a transitional area encompassing both very young ocean floor and a continental margin. These data consist of 853 seismograms (6 deg delta 42 deg) which produce 1068 travel times and 40 ray parameter estimates. These data are compared directly to another large suite of records representative of structure beneath the Gulf of California, an active spreading center. The spreading center model, GCA, was used as a starting point in WKBJ synthetic seismogram modeling and perturb GCA until the northeast Pacific data are matched. Application of wave field continuation to these two groups of data provides checks on model's consistency with the data as well as an estimate of the resolvability of differences between the two areas. Differences between the models derived from these two data sets are interpretable in terms of lateral structural variation beneath the two regimes.

Statistical parameters of random heterogeneity estimated by analysing coda waves based on finite difference method

NASA Astrophysics Data System (ADS)

Emoto, K.; Saito, T.; Shiomi, K.

2017-12-01

Short-period (<1 s) seismograms are strongly affected by small-scale (<10 km) heterogeneities in the lithosphere. In general, short-period seismograms are analysed based on the statistical method by considering the interaction between seismic waves and randomly distributed small-scale heterogeneities. Statistical properties of the random heterogeneities have been estimated by analysing short-period seismograms. However, generally, the small-scale random heterogeneity is not taken into account for the modelling of long-period (>2 s) seismograms. We found that the energy of the coda of long-period seismograms shows a spatially flat distribution. This phenomenon is well known in short-period seismograms and results from the scattering by small-scale heterogeneities. We estimate the statistical parameters that characterize the small-scale random heterogeneity by modelling the spatiotemporal energy distribution of long-period seismograms. We analyse three moderate-size earthquakes that occurred in southwest Japan. We calculate the spatial distribution of the energy density recorded by a dense seismograph network in Japan at the period bands of 8-16 s, 4-8 s and 2-4 s and model them by using 3-D finite difference (FD) simulations. Compared to conventional methods based on statistical theories, we can calculate more realistic synthetics by using the FD simulation. It is not necessary to assume a uniform background velocity, body or surface waves and scattering properties considered in general scattering theories. By taking the ratio of the energy of the coda area to that of the entire area, we can separately estimate the scattering and the intrinsic absorption effects. Our result reveals the spectrum of the random inhomogeneity in a wide wavenumber range including the intensity around the corner wavenumber as P(m) = 8πε2a3/(1 + a2m2)2, where ε = 0.05 and a = 3.1 km, even though past studies analysing higher-frequency records could not detect the corner. Finally, we

Digital Copy of the Pulkovo Plate Collection

NASA Astrophysics Data System (ADS)

Kanaev, I.; Kanaeva, N.; Poliakow, E.; Pugatch, T.

Report is devoted to a problem of saving of the Pulkovo plate collection. In total more than 50 thousand astronegatives are stored in the observatory. First of them are dated back to 1893. A risk of emulsion corrupting raises with current of time. Since 1996 the operation on digitization and record of the images of plates on electronic media (HDD, CD) are carried out in the observatory. The database ECSIP - Electronic Collection of the Star Images of the Pulkovo is created. There are recorded in it both complete, and extracted (separate areas) images of astronegatives. The plates as a whole are scanned on the photoscanner with rather rough optical resolution 600-2400 dpi. The matrixes with the separate images are digitized on the precision measuring machine "Fantasy" with high (6000-25400 dpi) resolution. The DB ECSIP allows to accept and to store different types of data of a matrix structure, including, CCD-frames. Structure of the ECSIP's software includes systems of visualization, processing and manipulation by the images, and also programs for position and photometric measurements. To the present time more than 40% completed and 10% extracted images from its total amount are digitized and recorded in DB ECSIP. The project is fulfilled at financial support by the Ministry of Science of Russian Federation, grant 01-54 "The coordinate -measuring astrographic machine "Fantasy".

Sites of Possibility: Applied Theatre and Digital Storytelling with Youth

ERIC Educational Resources Information Center

Alrutz, Megan

2013-01-01

As a process for engaging marginalised voices in the social/cultural economy of the media, digital storytelling has garnered much attention from media artists, community organisers and scholars since the early 1990s. The practice of digital storytelling, or the making and sharing of personal narratives through recorded voice-overs, digital…

Optical memories in digital computing

NASA Technical Reports Server (NTRS)

Alford, C. O.; Gaylord, T. K.

1979-01-01

High capacity optical memories with relatively-high data-transfer rate and multiport simultaneous access capability may serve as basis for new computer architectures. Several computer structures that might profitably use memories are: a) simultaneous record-access system, b) simultaneously-shared memory computer system, and c) parallel digital processing structure.

A low-cost, scalable, current-sensing digital headstage for high channel count μECoG.

PubMed

Trumpis, Michael; Insanally, Michele; Zou, Jialin; Elsharif, Ashraf; Ghomashchi, Ali; Sertac Artan, N; Froemke, Robert C; Viventi, Jonathan

2017-04-01

High channel count electrode arrays allow for the monitoring of large-scale neural activity at high spatial resolution. Implantable arrays featuring many recording sites require compact, high bandwidth front-end electronics. In the present study, we investigated the use of a small, light weight, and low cost digital current-sensing integrated circuit for acquiring cortical surface signals from a 61-channel micro-electrocorticographic (μECoG) array. We recorded both acute and chronic μECoG signal from rat auditory cortex using our novel digital current-sensing headstage. For direct comparison, separate recordings were made in the same anesthetized preparations using an analog voltage headstage. A model of electrode impedance explained the transformation between current- and voltage-sensed signals, and was used to reconstruct cortical potential. We evaluated the digital headstage using several metrics of the baseline and response signals. The digital current headstage recorded neural signal with similar spatiotemporal statistics and auditory frequency tuning compared to the voltage signal. The signal-to-noise ratio of auditory evoked responses (AERs) was significantly stronger in the current signal. Stimulus decoding based on true and reconstructed voltage signals were not significantly different. Recordings from an implanted system showed AERs that were detectable and decodable for 52 d. The reconstruction filter mitigated the thermal current noise of the electrode impedance and enhanced overall SNR. We developed and validated a novel approach to headstage acquisition that used current-input circuits to independently digitize 61 channels of μECoG measurements of the cortical field. These low-cost circuits, intended to measure photo-currents in digital imaging, not only provided a signal representing the local cortical field with virtually the same sensitivity and specificity as a traditional voltage headstage but also resulted in a small, light headstage that can

A low-cost, scalable, current-sensing digital headstage for high channel count μECoG

NASA Astrophysics Data System (ADS)

Trumpis, Michael; Insanally, Michele; Zou, Jialin; Elsharif, Ashraf; Ghomashchi, Ali; Sertac Artan, N.; Froemke, Robert C.; Viventi, Jonathan

2017-04-01

Objective. High channel count electrode arrays allow for the monitoring of large-scale neural activity at high spatial resolution. Implantable arrays featuring many recording sites require compact, high bandwidth front-end electronics. In the present study, we investigated the use of a small, light weight, and low cost digital current-sensing integrated circuit for acquiring cortical surface signals from a 61-channel micro-electrocorticographic (μECoG) array. Approach. We recorded both acute and chronic μECoG signal from rat auditory cortex using our novel digital current-sensing headstage. For direct comparison, separate recordings were made in the same anesthetized preparations using an analog voltage headstage. A model of electrode impedance explained the transformation between current- and voltage-sensed signals, and was used to reconstruct cortical potential. We evaluated the digital headstage using several metrics of the baseline and response signals. Main results. The digital current headstage recorded neural signal with similar spatiotemporal statistics and auditory frequency tuning compared to the voltage signal. The signal-to-noise ratio of auditory evoked responses (AERs) was significantly stronger in the current signal. Stimulus decoding based on true and reconstructed voltage signals were not significantly different. Recordings from an implanted system showed AERs that were detectable and decodable for 52 d. The reconstruction filter mitigated the thermal current noise of the electrode impedance and enhanced overall SNR. Significance. We developed and validated a novel approach to headstage acquisition that used current-input circuits to independently digitize 61 channels of μECoG measurements of the cortical field. These low-cost circuits, intended to measure photo-currents in digital imaging, not only provided a signal representing the local cortical field with virtually the same sensitivity and specificity as a traditional voltage headstage but

A low-cost, scalable, current-sensing digital headstage for high channel count μECoG

PubMed Central

Trumpis, Michael; Insanally, Michele; Zou, Jialin; Elsharif, Ashraf; Ghomashchi, Ali; Artan, N. Sertac; Froemke, Robert C.; Viventi, Jonathan

2017-01-01

Objective High channel count electrode arrays allow for the monitoring of large-scale neural activity at high spatial resolution. Implantable arrays featuring many recording sites require compact, high bandwidth front-end electronics. In the present study, we investigated the use of a small, light weight, and low cost digital current-sensing integrated circuit for acquiring cortical surface signals from a 61-channel micro-electrocorticographic (μECoG) array. Approach We recorded both acute and chronic μECoG signal from rat auditory cortex using our novel digital current-sensing headstage. For direct comparison, separate recordings were made in the same anesthetized preparations using an analog voltage headstage. A model of electrode impedance explained the transformation between current- and voltage-sensed signals, and was used to reconstruct cortical potential. We evaluated the digital headstage using several metrics of the baseline and response signals. Main results The digital current headstage recorded neural signal with similar spatiotemporal statistics and auditory frequency tuning compared to the voltage signal. The signal-to-noise ratio of auditory evoked responses (AERs) was significantly stronger in the current signal. Stimulus decoding based on true and reconstructed voltage signals were not significantly different. Recordings from an implanted system showed AERs that were detectable and decodable for 52 days. The reconstruction filter mitigated the thermal current noise of the electrode impedance and enhanced overall SNR. Significance We developed and validated a novel approach to headstage acquisition that used current-input circuits to independently digitize 61 channels of μECoG measurements of the cortical field. These low-cost circuits, intended to measure photo-currents in digital imaging, not only provided a signal representing the local cortical field with virtually the same sensitivity and specificity as a traditional voltage headstage but

36 CFR 1237.20 - What are special considerations in the maintenance of audiovisual records?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT AUDIOVISUAL, CARTOGRAPHIC, AND RELATED RECORDS MANAGEMENT § 1237.20 What are special considerations in the maintenance of audiovisual... practices. (b) Protect audiovisual records, including those recorded on digital media or magnetic sound or...

36 CFR 1237.20 - What are special considerations in the maintenance of audiovisual records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT AUDIOVISUAL, CARTOGRAPHIC, AND RELATED RECORDS MANAGEMENT § 1237.20 What are special considerations in the maintenance of audiovisual... practices. (b) Protect audiovisual records, including those recorded on digital media or magnetic sound or...

An Efficient Numerical Method for Computing Synthetic Seismograms for a Layered Half-space with Sources and Receivers at Close or Same Depths

NASA Astrophysics Data System (ADS)

Zhang, H.-m.; Chen, X.-f.; Chang, S.

- It is difficult to compute synthetic seismograms for a layered half-space with sources and receivers at close to or the same depths using the generalized R/T coefficient method (Kennett, 1983; Luco and Apsel, 1983; Yao and Harkrider, 1983; Chen, 1993), because the wavenumber integration converges very slowly. A semi-analytic method for accelerating the convergence, in which part of the integration is implemented analytically, was adopted by some authors (Apsel and Luco, 1983; Hisada, 1994, 1995). In this study, based on the principle of the Repeated Averaging Method (Dahlquist and Björck, 1974; Chang, 1988), we propose an alternative, efficient, numerical method, the peak-trough averaging method (PTAM), to overcome the difficulty mentioned above. Compared with the semi-analytic method, PTAM is not only much simpler mathematically and easier to implement in practice, but also more efficient. Using numerical examples, we illustrate the validity, accuracy and efficiency of the new method.

Digital image processing of vascular angiograms

NASA Technical Reports Server (NTRS)

Selzer, R. H.; Beckenbach, E. S.; Blankenhorn, D. H.; Crawford, D. W.; Brooks, S. H.

1975-01-01

The paper discusses the estimation of the degree of atherosclerosis in the human femoral artery through the use of a digital image processing system for vascular angiograms. The film digitizer uses an electronic image dissector camera to scan the angiogram and convert the recorded optical density information into a numerical format. Another processing step involves locating the vessel edges from the digital image. The computer has been programmed to estimate vessel abnormality through a series of measurements, some derived primarily from the vessel edge information and others from optical density variations within the lumen shadow. These measurements are combined into an atherosclerosis index, which is found in a post-mortem study to correlate well with both visual and chemical estimates of atherosclerotic disease.

75 FR 43498 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-26

... effective without further notice on August 25, 2010 unless comments are received which result in a contrary.... Categories of records in the system: Name, last four digits of the Social Security Number (SSN), date of... system: Storage: Electronic storage media. Retrievability: Last name, first name and/or last four digits...

Single-shot digital holography by use of the fractional Talbot effect.

PubMed

Martínez-León, Lluís; Araiza-E, María; Javidi, Bahram; Andrés, Pedro; Climent, Vicent; Lancis, Jesús; Tajahuerce, Enrique

2009-07-20

We present a method for recording in-line single-shot digital holograms based on the fractional Talbot effect. In our system, an image sensor records the interference between the light field scattered by the object and a properly codified parallel reference beam. A simple binary two-dimensional periodic grating is used to codify the reference beam generating a periodic three-step phase distribution over the sensor plane by fractional Talbot effect. This provides a method to perform single-shot phase-shifting interferometry at frame rates only limited by the sensor capabilities. Our technique is well adapted for dynamic wavefront sensing applications. Images of the object are digitally reconstructed from the digital hologram. Both computer simulations and experimental results are presented.

Recording Information on Architectural Heritage Should Meet the Requirements for Conservation Digital Recording Practices at the Summer Palace

NASA Astrophysics Data System (ADS)

Zhang, L.; Cong, Y.; Wu, C.; Bai, C.; Wu, C.

2017-08-01

The recording of Architectural heritage information is the foundation of research, conservation, management, and the display of architectural heritage. In other words, the recording of architectural heritage information supports heritage research, conservation, management and architectural heritage display. What information do we record and collect and what technology do we use for information recording? How do we determine the level of accuracy required when recording architectural information? What method do we use for information recording? These questions should be addressed in relation to the nature of the particular heritage site and the specific conditions for the conservation work. In recent years, with the rapid development of information acquisition technology such as Close Range Photogrammetry, 3D Laser Scanning as well as high speed and high precision Aerial Photogrammetry, many Chinese universities, research institutes and heritage management bureaux have purchased considerable equipment for information recording. However, the lack of understanding of both the nature of architectural heritage and the purpose for which the information is being collected has led to several problems. For example: some institutions when recording architectural heritage information aim solely at high accuracy. Some consider that advanced measuring methods must automatically replace traditional measuring methods. Information collection becomes the purpose, rather than the means, of architectural heritage conservation. Addressing these issues, this paper briefly reviews the history of architectural heritage information recording at the Summer Palace (Yihe Yuan, first built in 1750), Beijing. Using the recording practices at the Summer Palace during the past ten years as examples, we illustrate our achievements and lessons in recording architectural heritage information with regard to the following aspects: (buildings') ideal status desired, (buildings') current status

Secondary School Teachers' Approaches to Teaching Composition Using Digital Technology

ERIC Educational Resources Information Center

Wise, Stuart

2016-01-01

The music industry in the 21 century uses digital technology in a wide range of applications including in performance, in composition and in recording and publishing. In this article, I consider how the impact of digital technologies may be affecting pedagogical processes adopted by secondary music teachers, particularly in the area of…

Digital dental photography. Part 2: Purposes and uses.

PubMed

Ahmad, I

2009-05-09

Although the primary purpose of using digital photography in dentistry is for recording various aspects of clinical information in the oral cavity, other benefits also accrue. Detailed here are the uses of digital images for dento-legal documentation, education, communication with patients, dental team members and colleagues and for portfolios, and marketing. These uses enhance the status of a dental practice and improve delivery of care to patients.

Digital impression-taking: Fundamentals and benefits in orthodontics.

PubMed

Lecocq, Guillaume

2016-06-01

The digital era has burst into our offices in a big way. 3D camera technology has improved, enabling us to record our impressions and the occlusion in a digital format file. This file can then be used to make set-ups and manufacture orthodontic devices. Like any new technology, it needs to be studied and understood in order to grasp it fully and master the information and digital flow which can be generated between one's office and any external party involved in treatment, such as laboratories or other colleagues. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

Electronic health record adoption in US hospitals: the emergence of a digital "advanced use" divide.

PubMed

Adler-Milstein, Julia; Holmgren, A Jay; Kralovec, Peter; Worzala, Chantal; Searcy, Talisha; Patel, Vaishali

2017-11-01

While most hospitals have adopted electronic health records (EHRs), we know little about whether hospitals use EHRs in advanced ways that are critical to improving outcomes, and whether hospitals with fewer resources - small, rural, safety-net - are keeping up. Using 2008-2015 American Hospital Association Information Technology Supplement survey data, we measured "basic" and "comprehensive" EHR adoption among hospitals to provide the latest national numbers. We then used new supplement questions to assess advanced use of EHRs and EHR data for performance measurement and patient engagement functions. To assess a digital "advanced use" divide, we ran logistic regression models to identify hospital characteristics associated with high adoption in each advanced use domain. We found that 80.5% of hospitals adopted at least a basic EHR system, a 5.3 percentage point increase from 2014. Only 37.5% of hospitals adopted at least 8 (of 10) EHR data for performance measurement functions, and 41.7% of hospitals adopted at least 8 (of 10) patient engagement functions. Critical access hospitals were less likely to have adopted at least 8 performance measurement functions (odds ratio [OR] = 0.58; P < .001) and at least 8 patient engagement functions (OR = 0.68; P = 0.02). While the Health Information Technology for Economic and Clinical Health Act resulted in widespread hospital EHR adoption, use of advanced EHR functions lags and a digital divide appears to be emerging, with critical-access hospitals in particular lagging behind. This is concerning, because EHR-enabled performance measurement and patient engagement are key contributors to improving hospital performance. Hospital EHR adoption is widespread and many hospitals are using EHRs to support performance measurement and patient engagement. However, this is not happening across all hospitals. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association

UV laser interaction with a fluorescent dye solution studied using pulsed digital holography.

PubMed

Amer, Eynas; Gren, Per; Sjödahl, Mikael

2013-10-21

A frequency tripled Q-switched Nd-YAG laser (wavelength 355 nm, pulse duration 12 ns) has been used to pump Coumarin 153 dye solved in ethanol. Simultaneously, a frequency doubled pulse (532 nm) from the same laser is used to probe the solvent perpendicularly resulting in a gain through stimulated laser induced fluorescence (LIF) emission. The resulting gain of the probe beam is recorded using digital holography by blending it with a reference beam on the detector. Two digital holograms without and with the pump beam were recorded. Intensity maps were calculated from the recorded digital holograms and used to calculate the gain of the probe beam due to the stimulated LIF. In addition numerical data of the local temperature rise was calculated from the corresponding phase maps using Radon inversion. It was concluded that about 15% of the pump beam energy is transferred to the dye solution as heat while the rest is consumed in the radiative process. The results show that pulsed digital holography is a promising technique for quantitative study of fluorescent species.

System for objective assessment of image differences in digital cinema

NASA Astrophysics Data System (ADS)

Fliegel, Karel; Krasula, Lukáš; Páta, Petr; Myslík, Jiří; Pecák, Josef; Jícha, Marek

2014-09-01

There is high demand for quick digitization and subsequent image restoration of archived film records. Digitization is very urgent in many cases because various invaluable pieces of cultural heritage are stored on aging media. Only selected records can be reconstructed perfectly using painstaking manual or semi-automatic procedures. This paper aims to answer the question what are the quality requirements on the restoration process in order to obtain acceptably close visual perception of the digitally restored film in comparison to the original analog film copy. This knowledge is very important to preserve the original artistic intention of the movie producers. Subjective experiment with artificially distorted images has been conducted in order to answer the question what is the visual impact of common image distortions in digital cinema. Typical color and contrast distortions were introduced and test images were presented to viewers using digital projector. Based on the outcome of this subjective evaluation a system for objective assessment of image distortions has been developed and its performance tested. The system utilizes calibrated digital single-lens reflex camera and subsequent analysis of suitable features of images captured from the projection screen. The evaluation of captured image data has been optimized in order to obtain predicted differences between the reference and distorted images while achieving high correlation with the results of subjective assessment. The system can be used to objectively determine the difference between analog film and digital cinema images on the projection screen.

Comparison of MPEG digital video with super VHS tape for diagnostic echocardiographic readings

NASA Technical Reports Server (NTRS)

Soble, J. S.; Yurow, G.; Brar, R.; Stamos, T.; Neumann, A.; Garcia, M.; Stoddard, M. F.; Cherian, P. K.; Bhamb, B.; Thomas, J. D.

1998-01-01

BACKGROUND: Digital recording of echocardiographic studies is on the clinical horizon. However, full digital capture of complete echocardiographic studies in traditional video format is impractical, given current storage capacity and network bandwidth. To overcome these constraints, we evaluated the diagnostic image quality of digital video by using MPEG (Motion Picture Experts Group) compression. METHODS AND RESULTS: Fifty-eight complete, consecutive studies were recorded simultaneously with the use of MPEG-1 and sVHS videotape. Each matched MPEG and sVHS study pair was reviewed by two from a total of six readers, and findings were recorded with the use of a detailed, computerized reporting tool. Intrareader and interreader discrepancies were characterized as major or minor and analyzed in total and for specific subgroups of findings (left and right ventricular parameters, valvular insufficiency, and left ventricular regional wall motion). Intrareader discrepancies were reviewed by a consensus panel for agreement with either MPEG or sVHS findings. There was an exact concordance between MPEG and sVHS readings in 83% of findings. The majority of discrepancies were minor, with major discrepancies in only 2.7% of findings. There was no difference in the rate of consensus panel agreement with MPEG or sVHS for instances of intrareader discrepancy, either in total or for any subgroup of findings. Interreader discrepancy rates were nearly identical for both MPEG and sVHS. CONCLUSIONS: MPEG-1 digital video is equivalent to sVHS videotape for diagnostic echocardiography. MPEG increases the range of practical options for digital echocardiography and offers, for the first time, the advantages of digital recording in a familiar video format.

Calibration of an M L scale for South Africa using tectonic earthquake data recorded by the South African National Seismograph Network: 2006 to 2009

NASA Astrophysics Data System (ADS)

Saunders, Ian; Ottemöller, Lars; Brandt, Martin B. C.; Fourie, Christoffel J. S.

2013-04-01

A relation to determine local magnitude ( M L) based on the original Richter definition is empirically derived from synthetic Wood-Anderson seismograms recorded by the South African National Seismograph Network. In total, 263 earthquakes in the distance range 10 to 1,000 km, representing 1,681 trace amplitudes measured in nanometers from synthesized Wood-Anderson records on the vertical channel were considered to derive an attenuation relation appropriate for South Africa through multiple regression analysis. Additionally, station corrections were determined for 26 stations during the regression analysis resulting in values ranging between -0.31 and 0.50. The most appropriate M L scale for South Africa from this study satisfies the equation: {M_{{{L}}}} = {{lo}}{{{g}}_{{10}}}(A) + 1.149{{lo}}{{{g}}_{{10}}}(R) + 0.00063R + 2.04 - S The anelastic attenuation term derived from this study indicates that ground motion attenuation is significantly different from Southern California but comparable with stable continental regions.

The multi-parameter borehole system and high resolution seismic studies in the western part of the main Marmara Fault in the frame of MARSITE Project.

NASA Astrophysics Data System (ADS)

Ozel, Oguz; Guralp, Cansun; Tunc, Suleyman; Yalcinkaya, Esref

2016-04-01

The main objective of this study is to install a multi-parameter borehole system and surface array as close to the main Marmara Fault (MMF) in the western Marmara Sea as possible, and measure continuously the evolution of the state of the fault zone surrounding the MMF and to detect any anomaly or change, which may occur before earthquakes by making use of the data from the arrays already running in the eastern part of the Marmara Sea. The multi-parameter borehole system is composed of very wide dynamic range and stable borehole (VBB) broad band seismic sensor, and incorporate strain meter, tilt meter, and temperature and local hydrostatic pressure measuring devices. The borehole seismic station uses the latest update technologies and design ideas to record "Earth tides" signals to the smallest magnitude -3 events. Additionally, a surface microearthquake observation array, consisting of 8-10 seismometers around the borehole is established to obtain continuous high resolution locations of micro-seismicity and to better understand the existing seismically active structures and their roles in local tectonic settings.Bringing face to face the seismograms of microearthquakes recorded by borehole and surface instruments portrays quite different contents. The shorter recording duration and nearly flat frequency spectrum up to the Nyquist frequencies of borehole records are faced with longer recording duration and rapid decay of spectral amplitudes at higher frequencies of a surface seismogram. The main causative of the observed differences are near surface geology effects that mask most of the source related information the seismograms include, and that give rise to scattering, generating longer duration seismograms. In view of these circumstances, studies on microearthquakes employing surface seismograms may bring on misleading results. Particularly, the works on earthquake physics and nucleation process of earthquakes requires elaborate analysis of tiny events. It is

Patient empowerment by the means of citizen-managed Electronic Health Records: web 2.0 health digital identity scenarios.

PubMed

Falcão-Reis, Filipa; Correia, Manuel E

2010-01-01

With the advent of more sophisticated and comprehensive healthcare information systems, system builders are becoming more interested in patient interaction and what he can do to help to improve his own health care. Information systems play nowadays a crucial and fundamental role in hospital work-flows, thus providing great opportunities to introduce and improve upon "patient empowerment" processes for the personalization and management of Electronic Health Records (EHRs). In this paper, we present a patient's privacy generic control mechanisms scenarios based on the Extended OpenID (eOID), a user centric digital identity provider previously developed by our group, which leverages a secured OpenID 2.0 infrastructure with the recently released Portuguese Citizen Card (CC) for secure authentication in a distributed health information environment. eOID also takes advantage of Oauth assertion based mechanisms to implement patient controlled secure qualified role based access to his EHR, by third parties.

36 CFR 1225.24 - When can an agency apply previously approved schedules to electronic records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT SCHEDULING RECORDS § 1225.24 When... must notify the National Archives and Records Administration, Modern Records Programs (NWM), 8601... authority reference; and (v) Format of the records (e.g., database, scanned images, digital photographs, etc...

36 CFR 1225.24 - When can an agency apply previously approved schedules to electronic records?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT SCHEDULING RECORDS § 1225.24 When... must notify the National Archives and Records Administration, Modern Records Programs (NWM), 8601... authority reference; and (v) Format of the records (e.g., database, scanned images, digital photographs, etc...

36 CFR 1225.24 - When can an agency apply previously approved schedules to electronic records?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT SCHEDULING RECORDS § 1225.24 When... must notify the National Archives and Records Administration, Modern Records Programs (NWM), 8601... authority reference; and (v) Format of the records (e.g., database, scanned images, digital photographs, etc...

Digital Image Processing in Private Industry.

ERIC Educational Resources Information Center

Moore, Connie

1986-01-01

Examines various types of private industry optical disk installations in terms of business requirements for digital image systems in five areas: records management; transaction processing; engineering/manufacturing; information distribution; and office automation. Approaches for implementing image systems are addressed as well as key success…

Improving Hypertension Control and Patient Engagement Using Digital Tools.

PubMed

Milani, Richard V; Lavie, Carl J; Bober, Robert M; Milani, Alexander R; Ventura, Hector O

2017-01-01

Hypertension is present in 30% of the adult US population and is a major contributor to cardiovascular disease. The established office-based approach yields only 50% blood pressure control rates and low levels of patient engagement. Available home technology now provides accurate, reliable data that can be transmitted directly to the electronic medical record. We evaluated blood pressure control in 156 patients with uncontrolled hypertension enrolled into a home-based digital-medicine blood pressure program and compared them with 400 patients (matched to age, sex, body mass index, and blood pressure) in a usual-care group after 90 days. Digital-medicine patients completed questionnaires online, were asked to submit at least one blood pressure reading/week, and received medication management and lifestyle recommendations via a clinical pharmacist and a health coach. Blood pressure units were commercially available that transmitted data directly to the electronic medical record. Digital-medicine patients averaged 4.2 blood pressure readings per week. At 90 days, 71% of digital-medicine vs 31% of usual-care patients had achieved target blood pressure control. Mean decrease in systolic/diastolic blood pressure was 14/5 mm Hg in digital medicine, vs 4/2 mm Hg in usual care (P < .001). Excess sodium consumption decreased from 32% to 8% in the digital-medicine group (P = .004). Mean patient activation increased from 41.9 to 44.1 (P = .008), and the percentage of patients with low patient activation decreased from 15% to 6% (P = .03) in the digital-medicine group. A digital hypertension program is feasible and associated with significant improvement in blood pressure control rates and lifestyle change. Utilization of a virtual health intervention using connected devices improves patient activation and is well accepted by patients. Copyright © 2016 Elsevier Inc. All rights reserved.

Television animation store: Recording pictures on a parallel transfer magnetic disc

NASA Astrophysics Data System (ADS)

Durey, A. J.

1984-12-01

The recording and replaying of digital video signals using a computer-type magnetic disc-drive as part of an electronic rostrum camera animation system is described. The system was developed to enable picture sequences to be generated directly as television signals, instead of using cine film. The characteristics of the disc-drive are described together with data processing, error protection and signal synchronization systems, which enable digital television YUV component signals, sampled at 12 MHz, 4 MHz and 4 MHz respectively, to be recorded and replayed in real time.

Emergency access to protected health records.

PubMed

Künzi, Julien; Koster, Paul; Petković, Milan

2009-01-01

Digital Rights Management (DRM) schemes are receiving increased attention in the healthcare domain for the protection of sensitive health records as they offer security against insider attacks and advance protection features such as usage control. However, to be accepted by health care providers, a DRM solution has to fulfill specific healthcare requirements including emergency access. In this paper, we propose such DRM solution that can be deployed in highly distributed environments of electronic or personal health record infrastructures.

36 CFR § 1237.20 - What are special considerations in the maintenance of audiovisual records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION RECORDS MANAGEMENT AUDIOVISUAL, CARTOGRAPHIC, AND RELATED RECORDS MANAGEMENT § 1237.20 What are special considerations in the maintenance of... industry practices. (b) Protect audiovisual records, including those recorded on digital media or magnetic...

Artists' Perception of the Use of Digital Media in Painting

ERIC Educational Resources Information Center

Agyeman, Cynthia A.

2015-01-01

Painting is believed to predate recorded history and has been in existence for over 35,000 (Ayres, 1985; Bolton, 2013) years. Over the years, painting has evolved; new styles have been developed and digital media have been explored. Each period of change goes through a period of rejection before it is accepted. In the 1960s, digital media was…

Content-based fused off-axis object illumination direct-to-digital holography

DOEpatents

Price, Jeffery R.

2006-05-02

Systems and methods are described for content-based fused off-axis illumination direct-to-digital holography. A method includes calculating an illumination angle with respect to an optical axis defined by a focusing lens as a function of data representing a Fourier analyzed spatially heterodyne hologram; reflecting a reference beam from a reference mirror at a non-normal angle; reflecting an object beam from an object the object beam incident upon the object at the illumination angle; focusing the reference beam and the object beam at a focal plane of a digital recorder to from the content-based off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; and digitally recording the content based off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis.

The digital pen and paper technology: implementation and use in an existing clinical information system.

PubMed

Despont-Gros, Christelle; Bœuf, Christophe; Geissbuhler, Antoine; Lovis, Christian

2005-01-01

Evaluation of the technical feasibility of tight integration of the digital pen and paper technology in an existing computerized patient record.Technology: The digital pen is a normal pen able to record all actions of the user and to analyze a micro pattern printed on the paper. The digital paper is a normal paper printed with an almost invisible micro pattern of small dots encoding information such as position and identifiers. We report our experience in the implementation and the use of this technology in an existing large clinical information system for acquiring clinical information. It is possible to print uniquely identified forms using the digital paper technology. These forms can be pre-filled with clinical readable information about the patient. When care providers complete these forms using the digital pen, it is possible to acquire the data in a structured computerized patient record. The technology is easy to integrate in a component-based architecture based on Web Services. The digital pen and paper is a cost-effective technology that can be integrated in an existing clinical information system and allows fast and easy bedside clinical information acquisition without the need for an expensive infrastructure based on traditional portable devices or wireless devices.

Data management and digital delivery of analog data

USGS Publications Warehouse

Miller, W.A.; Longhenry, Ryan; Smith, T.

2008-01-01

The U.S. Geological Survey's (USGS) data archive at the Earth Resources Observation and Science (EROS) Center is a comprehensive and impartial record of the Earth's changing land surface. USGS/EROS has been archiving and preserving land remote sensing data for over 35 years. This remote sensing archive continues to grow as aircraft and satellites acquire more imagery. As a world leader in preserving data, USGS/EROS has a reputation as a technological innovator in solving challenges and ensuring that access to these collections is available. Other agencies also call on the USGS to consider their collections for long-term archive support. To improve access to the USGS film archive, each frame on every roll of film is being digitized by automated high performance digital camera systems. The system robotically captures a digital image from each film frame for the creation of browse and medium resolution image files. Single frame metadata records are also created to improve access that otherwise involves interpreting flight indexes. USGS/EROS is responsible for over 8.6 million frames of aerial photographs and 27.7 million satellite images.

Comparison of pulmonary artery and central venous pressure waveform measurements via digital and graphic measurement methods.

PubMed

Ahrens, T S; Schallom, L

2001-01-01

Techniques to measure pulmonary artery (PA) pressure waveforms include digital measurement, graphic measurement, and freeze-cursor measurement. Previous studies reported the inaccuracy of digital and freeze-cursor measurements. However, many of the previous studies were small and did not thoroughly examine the circumstances of when digital measurements might be inaccurate. To compare digital measurements and graphic measurements of PA and central venous pressure (CVP) waveforms in patients with a variety of respiratory patterns, and to compare digital measurements and graphic measurements of CVPs in patients with abnormal or right ventricular waveforms. A total of 928 patients were enrolled in this study. Waveforms from the PA and CVP were collected from each patient. The monitor pressure value (digital measurement) printed on the recorded waveform was compared with the pressure value obtained by a graphic strip recording and measured by one of the primary investigators (graphic measurement). Digital measurements were found to be inaccurate in measuring waveforms in all respiratory categories and in measuring right ventricular waveforms. PA diastolic values and CVP values were the most inaccurately measured waveforms. Digital errors of more than 4 mm Hg were common. There were instances in which the monitor's digital measurement was substantially different from the graphically measured value. This difference has the potential to mislead interpretation of clinical situations. The monitor's ability to occasionally give digital measurement values similar to the graphic measurements may lead to a false sense of security in clinicians. Because the accuracy of the monitor is inconsistent, the bedside clinician should interpret waveforms through use of a graphic recording rather than rely on the digital measurement on the monitor.

EDRMS for Academic Records Management: A Design Study in a Malaysian University

ERIC Educational Resources Information Center

Miah, Shah Jahan; Samsudin, Ahmad Zam Hariro

2017-01-01

Higher education institutes such as universities suffer from a range of issues in managing their academic records and relevant digital contents. Many universities nowadays use specific software applications for their effective mechanism in records management. The effective provision of enterprises records management (ERM) software for managing…

Study of the Impact of Certified Staff Perception of Digital Citizenship upon Teacher Professional Development

ERIC Educational Resources Information Center

Ashmeade, Lisa Ann

2016-01-01

This record of study examines the relationship between certified staff personnel perception of digital citizenship and the impact upon professional development. Quantitative and qualitative data was used to examine responses to teacher familiarity with the concept of digital citizenship and status of teaching digital citizenship culminating with…

Acquisition and replay systems for direct-to-digital holography and holovision

DOEpatents

Thomas, Clarence E.; Hanson, Gregory R.

2003-02-25

Improvements to the acquisition and replay systems for direct-to-digital holography and holovision are described. A method of recording an off-axis hologram includes: splitting a laser beam into an object beam and a reference beam; reflecting the reference beam from a reference beam mirror; reflecting the object beam from an illumination beamsplitter; passing the object beam through an objective lens; reflecting the object beam from an object; focusing the reference beam and the object beam at a focal plane of a digital recorder to form an off-axis hologram; digitally recording the off-axis hologram; and transforming the off-axis hologram in accordance with a Fourier transform to obtain a set of results. A method of writing an off-axis hologram includes: passing a laser beam through a spatial light modulator; and focusing the laser beam at a focal plane of a photorefractive crystal to impose a holographic diffraction grating pattern on the photorefractive crystal. A method of replaying an off-axis hologram includes: illuminating a photorefractive crystal having a holographic diffraction grating with a replay beam.

Endoscopic pulsed digital holography for 3D measurements

NASA Astrophysics Data System (ADS)

Saucedo, A. Tonatiuh; Mendoza Santoyo, Fernando; de La Torre-Ibarra, Manuel; Pedrini, Giancarlo; Osten, Wolfgang

2006-02-01

A rigid endoscope and three different object illumination source positions are used in pulsed digital holography to measure the three orthogonal displacement components from hidden areas of a harmonically vibrating metallic cylinder. In order to obtain simultaneous 3D information from the optical set up, it is necessary to match the optical paths of each of the reference object beam pairs, but to incoherently mismatch the three reference object beam pairs, such that three pulsed digital holograms are incoherently recorded within a single frame of the CCD sensor. The phase difference is obtained using the Fourier method and by subtracting two digital holograms captured for two different object positions.

Lifetime of digital media: is optics the solution?

NASA Astrophysics Data System (ADS)

Spitz, Erich; Hourcade, Jean-Charles; Lalo", Franck

2010-01-01

While the short term and mid-term archiving of digital data and information can be handled reasonably well with modern techniques, the long term aspects of the problem (several decades or even centuries) are much more difficult to manage. The heart of the problem is the longevity of storage media, which presently does not go beyond a few years, maybe one or two decades in the best cases. In this article, we review the various strategies for long term archiving, with two main categories: active and passive. We evaluate the various recording media in terms of their longevity. We then discuss the recordable optical digital disks (RODDs) and the state of the art in this domain; the present situation is that, with the techniques that are implemented commercially, good prospects for long term archiving are not available. Nevertheless, the conceptual simplicity of RODDs could be exploited to create new recordable digital media; the improvements that are needed seem to be reachable with reasonable development effort. Since RODDs are now in strong competition with other systems (hard disks or flash memory for instance) that constantly make enormous progress, there seems to be little hope to see RODDs win the race of capacity; nevertheless, longevity could provide them with a new market, since the need for long term archiving is so pressing everywhere in the world.

On Drift Effects in Velocity and Displacement of Greek Uncorrected Digital Strong Motion Data

NASA Astrophysics Data System (ADS)

Skarlatoudis, A.; Margaris, B.

2005-12-01

Fifty years after the first installation of analog accelerographs, digital instruments recording the strong-motion came in operation. Their advantages comparing to the analog ones are obvious and they have been described in detail in several works. Nevertheless it has been pointed out that velocity and displacement values derived from several accelerograms, recorded in various strong earthquakes worldwide (e.g. 1999 Chi-Chi, Taiwan, Hector Mine, 2002 Denali) by digital instruments, are plagued by drifts when only a simple baseline correction derived from the pre-event portion of the record is removed. In Greece a significant number of accelerographic networks and arrays have been deployed covering the whole area. Digital accelerographs now constitute a significant part of the National Strong Motion network of the country. Detailed analyses of the data processing of accelerograms recorded by digital instruments exhibited that the same drifts exist in the Greek strong motion database. In this work, a methodology proposed and described in various articles (Boore, 2001; 2003; 2005) for removing the aforementioned drifts of the accelerograms is applied. It is also attempted a careful look of the nature of the drifts for understanding the noise characteristics relative to the signal. The intrinsic behaviour of signal to noise ratio is crucial for the adequacy of baseline corrections applied on digital uncorrected accelerograms. Velocities and displacements of the uncorrected and corrected accelerograms are compared and the drift effects in the Fourier and response spectra are presented.

Standard Health Level Seven for Odontological Digital Imaging

PubMed Central

Abril-Gonzalez, Mauricio; Portilla, Fernando A.

2017-01-01

Abstract Background: A guide for the implementation of dental digital imaging reports was developed and validated through the International Standard of Health Informatics–Health Level Seven (HL7), achieving interoperability with an electronic system that keeps dental records. Introduction: Digital imaging benefits patients, who can view previous close-ups of dental examinations; providers, because of greater efficiency in managing information; and insurers, because of improved accessibility, patient monitoring, and more efficient cost management. Finally, imaging is beneficial for the dentist who can be more agile in the diagnosis and treatment of patients using this tool. Materials and Methods: The guide was developed under the parameters of an HL7 standard. It was necessary to create a group of dentists and three experts in information and communication technologies from different institutions. Discussion: Diagnostic images scanned with conventional radiology or from a radiovisiograph can be converted to Digital Imaging and Communications in Medicine (DICOM) format, while also retaining patient information. The guide shows how the information of the health record of the patient and the information of the dental image could be standardized in a Clinical Dental Record document using international informatics standard like HL7-V3-CDA document (dental document Level 2). Since it is an informatics standardized document, it could be sent, stored, or displayed using different devices—personal computers or mobile devices—independent of the platform used. Conclusions: Interoperability using dental images and dental record systems reduces adverse events, increases security for the patient, and makes more efficient use of resources. This article makes a contribution to the field of telemedicine in dental informatics. In addition to that, the results could be a reference for projects of electronic medical records when the dental documents are part of them. PMID