Science.gov

Sample records for dioxide water energy

  1. Performance evaluation of carbon dioxide-alkanolamine- water system by equation of state/excess Gibbs energy models

    NASA Astrophysics Data System (ADS)

    Suleman, H.; Maulud, A. S.; Man, Z.

    2016-06-01

    Numerous thermodynamic techniques have been applied to correlate carbon dioxide- alkanolamine-water systems, with varying accuracy and complexity. With advent of high pressure carbon dioxide absorption in industry, the development of high pressure thermodynamic models have became an exigency. Equation of state/excess Gibbs energy models promises a substantial improvement in this field. Many researchers have shown application of these models to high pressure vapour liquid equilibria of said system with good correlation. However, no study shows the range of application of these models in presence of other competitive techniques. Therefore, this study quantitatively describes the range of application of equation of state/excess Gibbs energy models to carbon dioxide-alkanolamine systems. The model uses Linear Combination of Vidal and Michelsen mixing rule for correlation of carbon dioxide absorption in single aqueous monoethanolamine, diethanolamine and methyldiethanolamine mixtures. The results show that correlation of equation of state/excess Gibbs energy models show a transient change at carbon dioxide loadings of 0.8. Therefore, these models are applicable to the above mentioned system for carbon dioxide loadings beyond 0.8 mol/mol and higher. The observations are similar in behaviour for all tested alkanolamines and are therefore generalized for the system.

  2. Solubility prediction of carbon dioxide in water by an iterative equation of state/excess Gibbs energy model

    NASA Astrophysics Data System (ADS)

    Suleman, H.; Maulud, A. S.; Man, Z.

    2016-06-01

    The solubility of carbon dioxide in water has been predicted extensively by various models, owing to their vast applications in process industry. Henry's law has been widely utilized for solubility prediction with good results at low pressure. However, the law shows large deviations at high pressure, even when adjusted to pressure correction and improved conditions. Contrarily, equations of state/excess Gibbs energy models are a promising addition to thermodynamic models for prediction at high pressure non-ideal equilibria. These models can efficiently predict solubilities at high pressures, even when the experimental solubilities are not corroborated. Hence, these models work iteratively, utilizing the mathematical redundancy of local composition excess Gibbs energy models. In this study, an iterative form of Linear Combination of Vidal and Michelsen (LCVM) mixing rule has been used for prediction of carbon dioxide solubility in water, in conjunction with UNIFAC and translated modified Peng- Robinson equation of state. The proposed model, termed iterative LCVM (i-LCVM), predicts carbon dioxide solubility in water for a wide range of temperature (273 to 453 K) and pressure (101.3 to 7380 kPa). The i-LCVM shows good agreement with experimental values and predicts better than Henry's law (53% improvement).

  3. Salt marsh-atmosphere exchange of energy, water vapor, and carbon dioxide: Effects of tidal flooding and biophysical controls

    NASA Astrophysics Data System (ADS)

    Moffett, Kevan B.; Wolf, Adam; Berry, Joe A.; Gorelick, Steven M.

    2010-10-01

    The degree to which short-duration, transient floods modify wetland-atmosphere exchange of energy, water vapor, and carbon dioxide (CO2) is poorly documented despite the significance of flooding in many wetlands. This study explored the effects of transient floods on salt marsh-atmosphere linkages. Eddy flux, micrometeorological, and other field data collected during two tidal phases (daytime versus nighttime high tides) quantified the salt marsh radiation budget, surface energy balance, and CO2 flux. Analysis contrasted flooded and nonflooded and day and night effects. The salt marsh surface energy balance was similar to that of a heating-dominated sparse crop during nonflooded periods but similar to that of an evaporative cooling-dominated, well-watered grassy lawn during flooding. Observed increases in latent heat flux and decreases in net ecosystem exchange during flooding were proportional to flood depth and duration, with complete CO2 flux suppression occurring above some flood height less than the canopy height. Flood-induced changes in the salt marsh energy balance were dominated by changes in sensible heat flux, soil heat flux, and surface water heat storage. Parameters suitable for predicting the salt marsh surface energy balance were obtained by calibrating common models (e.g., Penman-Monteith, Priestley-Taylor, and pan coefficient). Biophysical controls on salt marsh-atmosphere exchange were identified following calibration of models describing the coupling of canopy photosynthesis and stomatal conductance in the salt marsh. The effects of flooding on salt marsh-atmosphere exchange are temporary but strongly affect the marsh water, carbon, and energy balance despite their short duration.

  4. The Water, Energy, and Carbon Dioxide Sequestration Simulation Model (WECSsim). A user's manual

    SciTech Connect

    Kobos, Peter Holmes; Roach, Jesse Dillon; Klise, Geoffrey Taylor; Heath, Jason E.; Dewers, Thomas A.; Gutierrez, Karen A.; Malczynski, Leonard A.; Borns, David James; McNemar, Andrea

    2014-01-01

    The Water, Energy, and Carbon Sequestration Simulation Model (WECSsim) is a national dynamic simulation model that calculates and assesses capturing, transporting, and storing CO2 in deep saline formations from all coal and natural gas-fired power plants in the U.S. An overarching capability of WECSsim is to also account for simultaneous CO2 injection and water extraction within the same geological saline formation. Extracting, treating, and using these saline waters to cool the power plant is one way to develop more value from using saline formations as CO2 storage locations. WECSsim allows for both one-to-one comparisons of a single power plant to a single saline formation along with the ability to develop a national CO2 storage supply curve and related national assessments for these formations. This report summarizes the scope, structure, and methodology of WECSsim along with a few key results. Developing WECSsim from a small scoping study to the full national-scale modeling effort took approximately 5 years. This report represents the culmination of that effort. The key findings from the WECSsim model indicate the U.S. has several decades' worth of storage for CO2 in saline formations when managed appropriately. Competition for subsurface storage capacity, intrastate flows of CO2 and water, and a supportive regulatory environment all play a key role as to the performance and cost profile across the range from a single power plant to all coal and natural gas-based plants' ability to store CO2. The overall system's cost to capture, transport, and store CO2 for the national assessment range from $74 to $208 / tonne stored ($96 to 272 / tonne avoided) for the first 25 to 50% of the 1126 power plants to between $1,585 to well beyond $2,000 / tonne stored ($2,040 to well beyond $2,000 / tonne avoided) for the remaining 75 to 100% of the plants. The latter range, while extremely

  5. CHLORINE DIOXIDE FOR DRINKING WATER RESEARCH DIVISION

    EPA Science Inventory

    In order to comply with the trihalomethane regulation, many drinking water utilities have had to alter their treatment methods. ne option available to these utilities is to use a disinfectant other than chlorine such as chlorine dioxide. ith chlorine dioxide disinfection, trihalo...

  6. Solubility of Carbon Dioxide in Water.

    ERIC Educational Resources Information Center

    Bush, Pat; And Others

    1992-01-01

    Describes an activity measuring the amount of dissolved carbon dioxide in carbonated water at different temperatures. The amount of carbon dioxide is measured by the amount of dilute ammonia solution needed to produce a pH indicator color change. (PR)

  7. Water and Carbon Dioxide Adsorption at Olivine Surfaces

    SciTech Connect

    Kerisit, Sebastien N.; Bylaska, Eric J.; Felmy, Andrew R.

    2013-11-14

    Plane-wave density functional theory (DFT) calculations were performed to simulate water and carbon dioxide adsorption at the (010) surface of five olivine minerals, namely, forsterite (Mg2SiO4), calcio-olivine (Ca2SiO4), tephroite (Mn2SiO4), fayalite (Fe2SiO4), and Co-olivine (Co2SiO4). Adsorption energies per water molecule obtained from energy minimizations varied from -78 kJ mol-1 for fayalite to -128 kJ mol-1 for calcio-olivine at sub-monolayer coverage and became less exothermic as coverage increased. In contrast, carbon dioxide adsorption energies at sub-monolayer coverage ranged from -20 kJ mol-1 for fayalite to -59 kJ mol-1 for calcio-olivine. Therefore, the DFT calculations show a strong driving force for carbon dioxide displacement by water at the surface of all olivine minerals in a competitive adsorption scenario. Additionally, adsorption energies for both water and carbon dioxide were found to be more exothermic for the alkaline-earth (AE) olivines than for the transition-metal (TM) olivines and to not correlate with the solvation enthalpies of the corresponding divalent cations. However, a correlation was obtained with the charge of the surface divalent cation indicating that the more ionic character of the AE cations in the olivine structure relative to the TM cations leads to greater interactions with adsorbed water and carbon dioxide molecules at the surface and thus more exothermic adsorption energies for the AE olivines. For calcio-olivine, which exhibits the highest divalent cation charge of the five olivines, ab initio molecular dynamics simulations showed that this effect leads both water and carbon dioxide to react with the surface and form hydroxyl groups and a carbonate-like species, respectively.

  8. Influence of Water Vapors and Hydrogen on the Energy Band Bending in the SnO2 Microcrystals of Polycrystalline Tin Dioxide Films

    NASA Astrophysics Data System (ADS)

    Gaman, V. I.; Almaev, A. V.; Sevast'yanov, E. Yu.; Maksimova, N. K.

    2015-06-01

    The results of studying the dependence of the energy band bending at the interface of contacting SnO2 microcrystals in the polycrystalline tin dioxide film on the humidity level of clean air and hydrogen concentration in the gas mixture of clean air + H2 are presented. The experimental results showed that the bending of energy bands in SnO2 is decreased under exposure to the water vapors and molecular hydrogen. The presence of two types of the adsorption centers for water molecules on the surface of SnO2 is found. It is shown that at the absolute humidity of the gas mixture above 12 g/m3, the H2O and H2 molecules are adsorbed on the same centers, whose surface density is of 1012 сm-2 at a concentration of donor impurity in SnO2 equal to 1018 сm-3.

  9. Actinide Dioxides in Water: Interactions at the Interface

    SciTech Connect

    Alexandrov, Vitaly; Shvareva, Tatiana Y.; Hayun, Shmuel; Asta, Mark; Navrotsky, Alexandra

    2011-12-15

    A comprehensive understanding of chemical interactions between water and actinide dioxide surfaces is critical for safe operation and storage of nuclear fuels. Despite substantial previous research, understanding the nature of these interactions remains incomplete. In this work, we combine accurate calorimetric measurements with first-principles computational studies to characterize surface energies and adsorption enthalpies of water on two fluorite-structured compounds, ThO₂ and CeO₂, that are relevant for understanding the behavior of water on actinide oxide surfaces more generally. We determine coverage-dependent adsorption enthalpies and demonstrate a mixed molecular and dissociative structure for the first hydration layer. The results show a correlation between the magnitude of the anhydrous surface energy and the water adsorption enthalpy. Further, they suggest a structural model featuring one adsorbed water molecule per one surface cation on the most stable facet that is expected to be a common structural signature of water adsorbed on actinide dioxide compounds.

  10. Analysis of carbon dioxide, water vapour and energy fluxes over an Indian teak mixed deciduous forest for winter and summer months using eddy covariance technique

    NASA Astrophysics Data System (ADS)

    Jha, Chandra Shekhar; Thumaty, Kiran Chand; Rodda, Suraj Reddy; Sonakia, Ajit; Dadhwal, Vinay Kumar

    2013-10-01

    In the present study, we report initial results on analysis of carbon dioxide (CO2), water vapour (H2O), and energy fluxes (sensible and latent heat flux) over teak mixed deciduous forests of Madhya Pradesh, central India, during winter (November 2011 and January 2012) and summer (February-May 2012) seasons using eddy covariance flux tower datasets. During the study period, continuous fast response measurements of CO2, H2O and heat fluxes above the canopy were carried out at 10 Hz and averaged for 30 minutes. Concurrently, slow response measurements of meteorological parameters are also being carried out. Diurnal and seasonal variations of CO2, H2O and heat fluxes were analysed and correlated with the meteorological variables. The study showed strong influence of leaf off and on scenario on the CO2, H2O and energy fluxes due to prevalence of deciduous vegetation type in the study area. Maximum amount of CO2 was sequestered for photosynthesis during winter (monthly mean of mol/m2/s) compared to summer (monthly mean of mol/m2/s). Energy flux analysis (weekly mean) showed more energy being portioned into latent heat during winter (668 W/m2) and sensible heat during summer (718 W/m2).

  11. Assessing Carbon Dioxide Emissions from Energy Use at a University

    ERIC Educational Resources Information Center

    Riddell, William; Bhatia, Krishan Kumar; Parisi, Matthew; Foote, Jessica; Imperatore, John, III

    2009-01-01

    Purpose: The purpose of this paper is to assess the carbon dioxide emissions associated with electric, HVAC, and hot water use from a US university. Design/methodology/approach: First, the total on-campus electrical, natural gas and oil consumption for an entire year was assessed. For each category of energy use, the carbon associated with…

  12. Carbon dioxide and water vapor high temperature electrolysis

    NASA Technical Reports Server (NTRS)

    Isenberg, Arnold O.; Verostko, Charles E.

    1989-01-01

    The design, fabrication, breadboard testing, and the data base obtained for solid oxide electrolysis systems that have applications for planetary manned missions and habitats are reviewed. The breadboard tested contains sixteen tubular cells in a closely packed bundle for the electrolysis of carbon dioxide and water vapor. The discussion covers energy requirements, volume, weight, and operational characteristics related to the measurement of the reactant and product gas compositions, temperature distribution along the electrolyzer tubular cells and through the bundle, and thermal energy losses. The reliability of individual cell performance in the bundle configuration is assessed.

  13. Global carbon dioxide emissions from inland waters

    USGS Publications Warehouse

    Raymond, Peter A.; Hartmann, Jens; Lauerwald, Ronny; Sobek, Sebastian; McDonald, Cory P.; Hoover, Mark; Butman, David; Striegl, Rob; Mayorga, Emilio; Humborg, Christoph; Kortelainen, Pirkko; Durr, Hans H.; Meybeck, Michel; Ciais, Philippe; Guth, Peter

    2013-01-01

    Carbon dioxide (CO2) transfer from inland waters to the atmosphere, known as CO2 evasion, is a component of the global carbon cycle. Global estimates of CO2 evasion have been hampered, however, by the lack of a framework for estimating the inland water surface area and gas transfer velocity and by the absence of a global CO2 database. Here we report regional variations in global inland water surface area, dissolved CO2 and gas transfer velocity. We obtain global CO2 evasion rates of 1.8   petagrams of carbon (Pg C) per year from streams and rivers and 0.32  Pg C yr−1 from lakes and reservoirs, where the upper and lower limits are respectively the 5th and 95th confidence interval percentiles. The resulting global evasion rate of 2.1 Pg C yr−1 is higher than previous estimates owing to a larger stream and river evasion rate. Our analysis predicts global hotspots in stream and river evasion, with about 70 per cent of the flux occurring over just 20 per cent of the land surface. The source of inland water CO2 is still not known with certainty and new studies are needed to research the mechanisms controlling CO2 evasion globally.

  14. Modeling sulfur dioxide absorption by fine water spray

    SciTech Connect

    Cheng-Hsiung Huang

    2005-07-01

    A novel theoretical model was developed to determine the removal efficiency of sulfur dioxide using fine water spray. The droplet pH, diameter, S(IV) concentration, sulfur dioxide concentration, and liquid-to-gas ratio are found to influence the absorption of sulfur dioxide by the fine water spray. The results demonstrate that the absorption of sulfur dioxide by the fine water spray increases as the droplet diameter falls. The concentration gradient between the interface of the gaseous and liquid phases causes the absorption of sulfur dioxide by the droplets to increase as the initial S(IV) concentration decreases or the sulfur dioxide concentration increases. The results indicate that the performance of the fine water spray in removing sulfur dioxide is generally improved by reducing the droplet diameter or the initial S(IV) concentration, or by increasing the sulfur dioxide concentration, the droplet pH or the liquid-to-gas ratio. The proposed model reveals the parameters that should be controlled in using a fine water spray device and a method for improving its performance in removing sulfur dioxide.

  15. Array of titanium dioxide nanostructures for solar energy utilization

    DOEpatents

    Qiu, Xiaofeng; Parans Paranthaman, Mariappan; Chi, Miaofang; Ivanov, Ilia N; Zhang, Zhenyu

    2014-12-30

    An array of titanium dioxide nanostructures for solar energy utilization includes a plurality of nanotubes, each nanotube including an outer layer coaxial with an inner layer, where the inner layer comprises p-type titanium dioxide and the outer layer comprises n-type titanium dioxide. An interface between the inner layer and the outer layer defines a p-n junction.

  16. Low Energy, Low Emissions: Sulfur Dioxide; Nitrogen Oxides, and Carbon Dioxide in Western Europe.

    ERIC Educational Resources Information Center

    Alcamo, Joseph; De Vries, Bert

    1992-01-01

    Links proposed low-energy scenarios for different Western European countries with the amount of pollutants that may result from these scenarios. Sulfur dioxide, nitrogen oxide, and carbon dioxide emissions are calculated for the 10 countries for which low-energy scenarios are available, resulting in reductions of 54%, 37%, and 40%, respectively.…

  17. Partitioning Carbon Dioxide and Water Vapor Fluxes Using Correlation Analysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Partitioning of eddy covariance flux measurements is routinely done to quantify the contributions of separate processes to the overall fluxes. Measurements of carbon dioxide fluxes represent the difference between gross ecosystem photosynthesis and total respiration, while measurements of water vapo...

  18. Slurried solid media for simultaneous water purification and carbon dioxide removal from gas mixtures

    DOEpatents

    Aines, Roger D.; Bourcier, William L.; Viani, Brian

    2013-01-29

    A slurried solid media for simultaneous water purification and carbon dioxide removal from gas mixtures includes the steps of dissolving the gas mixture and carbon dioxide in water providing a gas, carbon dioxide, water mixture; adding a porous solid media to the gas, carbon dioxide, water mixture forming a slurry of gas, carbon dioxide, water, and porous solid media; heating the slurry of gas, carbon dioxide, water, and porous solid media producing steam; and cooling the steam to produce purified water and carbon dioxide.

  19. Microbial Electrosynthesis: Feeding Microbes Electricity To Convert Carbon Dioxide and Water to Multicarbon Extracellular Organic Compounds

    PubMed Central

    Nevin, Kelly P.; Woodard, Trevor L.; Franks, Ashley E.; Summers, Zarath M.; Lovley, Derek R.

    2010-01-01

    The possibility of providing the acetogenic microorganism Sporomusa ovata with electrons delivered directly to the cells with a graphite electrode for the reduction of carbon dioxide to organic compounds was investigated. Biofilms of S. ovata growing on graphite cathode surfaces consumed electrons with the reduction of carbon dioxide to acetate and small amounts of 2-oxobutyrate. Electrons appearing in these products accounted for over 85% of the electrons consumed. These results demonstrate that microbial production of multicarbon organic compounds from carbon dioxide and water with electricity as the energy source is feasible. PMID:20714445

  20. Computational studies of water and carbon dioxide interactions with cellobiose.

    PubMed

    Bazooyar, Faranak; Bohlén, Martin; Bolton, Kim

    2015-01-01

    B3LYP/6-311++G** with dispersion correction (DFT-D) was used to study local and global minimum energy structures of water (H2O) or carbon dioxide (CO2) bonding with a pair of cellobiose molecules. The calculations showed that neither the H2O nor the CO2 prefer to be between the cellobiose molecules, and that the minimum energy structures occur when these molecules bond to the outer surface of the cellobiose pair. The calculations also showed that the low energy structures have a larger number of inter-cellobiose hydrogen bonds than the high energy structures. These results indicate that penetration of H2O or CO2 between adjacent cellobiose pairs, which would assist steam or supercritical CO2 (SC-CO2) explosion of cellulose, is not energetically favored. Comparison of the energies obtained with DFT-D and DFT (the same method but without dispersion correction) show that both hydrogen bonds and van der Waals interactions play an important role in cellobiose-cellobiose interactions. PMID:25617207

  1. Regeneration of oxygen from carbon dioxide and water.

    NASA Technical Reports Server (NTRS)

    Weissbart, J.; Smart, W. H.; Wydeven, T.

    1972-01-01

    In a closed ecological system it is necessary to reclaim most of the oxygen required for breathing from respired carbon dioxide and the remainder from waste water. One of the advanced physicochemical systems being developed for generating oxygen in manned spacecraft is the solid electrolyte-electrolysis system. The solid electrolyte system consists of two basic units, an electrolyzer and a carbon monoxide disproportionator. The electrolyzer can reclaim oxygen from both carbon dioxide and water. Electrolyzer preparation and assembly are discussed together with questions of reactor design and electrolyzer performance data.

  2. Study of redox reactions to split water and carbon dioxide

    NASA Astrophysics Data System (ADS)

    Arifin, Darwin

    The development of carbon-neutral, environmentally-sustainable energy carrier is a technological imperative necessary to mitigate the impact of anthropogenic carbon dioxide on earth's climate. One compelling approach rapidly gaining international attention is the conversion of solar energy into renewable fuels, such as H2 or CO, via a two-step thermochemical cycle driven by concentrated solar power. In accordance with the increased interest in this process, there is a need to better understand the gas splitting chemistry on the metal oxide intermediates encountered in such solar-driven processes. Here we measured the H2 and CO production rates during oxidation by H2O and CO2 in a stagnation flow reactor. Redox cycles were performed over various metal oxide chemistries such as hercynite and ceria based materials that are thermally reduced by laser irradiation. In addition to cycle capacity evaluation, reaction kinetics intrinsic to the materials were extracted using a model-based analytical approach to account for the effects of mixing and dispersion in the reactor. Investigation of the "hercynite chemistry" with raman spectroscopy verifies that, at the surface, the cycle proceeds by stabilizing the reduced and oxidized moieties in two different compounds, which allows the thermal reduction reaction to occur to a greater extent at a temperature 150 °C lower than a similarly prepared CoFe2O4-coated m-ZrO2. Investigation of the ceria cycle shows that the water splitting reaction, in the range of 750 - 950 °C and 20 - 40 vol.% H2O, can best be described by a first-order kinetic model with low apparent activation energy (29 kJ/mol). The carbon dioxide splitting reaction, in the range of 650 - 875 °C and 10 - 40 vol.% CO2, is a more complex surface-mediated phenomena that is controlled by a temperature-dependent surface site blocking mechanism involving adsorbed carbon. Moreover, we find that lattice substitution of ceria with zirconium can increase H2 production by

  3. CHLORINE DIOXIDE WATER DISINFECTION: A PROSPECTIVE EPIDEMIOLOGY STUDY

    EPA Science Inventory

    An epidemiologic study of 198 persons exposed for 3 months to drinking water disinfected with chlorine dioxide was conducted in a rural village. A control population of 118 nonexposed persons was also studied. Pre-exposure hematologic and serum chemical parameters were compared w...

  4. Carbon Dioxide and Vegetation Water Use

    SciTech Connect

    Ball, J.T.; Peterson, A.G.; Hoylman, A.M.; Luo, Y.; Sims, D.A.; Johnson, D.W.; Coleman, J.S.; Ross, P.D.; Cheng, W.

    1996-12-01

    Evapo-transpiration from vegetation, as well as patterns of precipitation are expected to change as the concentration of CO{sub 2} in the atmosphere continues to rise (f). Water modulates the rates of many biogeochemical processes, and it has been estimated that water directly limits plant productivity over two-thirds of the earth's land surface (2). Water quality and availability are increasingly important practical issues as demands by both agricultural and urban users continue to increase. In a recent Perspective article (3) Farquhar stated that transpiration (water loss) from terrestrial vegetation will decline by 40 to 50% as the CO{sub 2} concentration in the atmosphere approaches twice present levels. He suggested that ''the impending saving of water would be a welcome result of the rising atmospheric CO{sub 2} concentration.'' We can confirm that large reductions in transpiration are expected by terrestrial physiological ecologists. Examining 35 recent articles that discussed the issue of water use while synthesizing research on ecosystem impacts of doubling atmospheric CO{sub 2} (including reviews and crop/natural ecosystem models), we found that 31 articles suggest that reductions in water use of between 25 and 50% are to be expected.

  5. Metal-Organic Framework for Emulsifying Carbon Dioxide and Water.

    PubMed

    Liu, Chengcheng; Zhang, Jianling; Zheng, Lirong; Zhang, Jing; Sang, Xinxin; Kang, Xinchen; Zhang, Bingxing; Luo, Tian; Tan, Xiuniang; Han, Buxing

    2016-09-12

    Forming emulsions of carbon dioxide (CO2 ) and water can largely expand the utility of CO2 . Herein we propose for the first time the utilization of a metal-organic framework (MOF) for emulsifying CO2 and water. Owing to the hybrid composition, MOF particles can easily assemble at the CO2 /water interface to create a rigid protective barrier around the dispersed droplet. The MOF-stabilized CO2 and water emulsion has exceptional stability compared to those emulsions stabilized by surfactants or other solids. Moreover, the CO2 and water emulsion stabilized by MOF is "tunable" due to the designable features of MOFs and adjustable character of CO2 . Such a novel kind of emulsion composed of CO2 , water, and MOF provides a facile route for constructing MOF superstructures with many advantages. The macroporous networks and hollow capsules of different kinds of MOFs have been successfully derived from CO2 and water emulsions. PMID:27529754

  6. The Health Effects of Chlorine Dioxide as a Disinfectant in Potable Water: A Literature Survey

    ERIC Educational Resources Information Center

    Calabrese, Edward J.; And Others

    1978-01-01

    The use of chlorine dioxide as a disinfectant in water is being considered by the EPA. This article presents a summary of the known published reports concerning health effects of chlorine dioxide on animal and human populations. (Author/MA)

  7. Carbon dioxide, the feedstock for using renewable energy

    NASA Astrophysics Data System (ADS)

    Hashimoto, K.; Kumagai, N.; Izumiya, K.; Kato, Z.

    2011-03-01

    Extrapolation of world energy consumption between 1990 and 2007 to the future reveals the complete exhaustion of petroleum, natural gas, uranium and coal reserves on Earth in 2040, 2044, 2049 and 2054, respectively. We are proposing global carbon dioxide recycling to use renewable energy so that all people in the whole world can survive. The electricity will be generated by solar cell in deserts and used to produce hydrogen by seawater electrolysis at t nearby desert coasts. Hydrogen, for which no infrastructures of transportation and combustion exist, will be converted to methane at desert coasts by the reaction with carbon dioxide captured by energy consumers. Among systems in global carbon dioxide recycling, seawater electrolysis and carbon dioxide methanation have not been performed industrially. We created energy-saving cathodes for hydrogen production and anodes for oxygen evolution without chlorine formation in seawater electrolysis, and ideal catalysts for methane formation by the reaction of carbon dioxide with hydrogen. Prototype plant and industrial scale pilot plant have been built.

  8. Density functional treatment of water-carbon dioxide van der Waals complex

    SciTech Connect

    Abashkin, Y.; Mele, F.; Russo, N.; Toscano, M.

    1994-12-31

    LCGTO-LSD and LCGTO-NLSD methods have been tested for the study of water-carbon dioxide weakly bound binary complex. Different local and nonlocal exchange-correlation energy functionals and many grid radial points have been used. Results show that both nonlocal corrections and a large number of radial points in the grid are mandatory for well reproducing then experimental data. 19 refs., 1 fig., 2 tabs.

  9. Gaseous, chlorine-free chlorine dioxide for drinking water

    SciTech Connect

    Gordon, G.; Rosenblatt, A.

    1996-11-01

    The benefits of applying chlorine dioxide (ClO{sub 2}) for the oxidative treatment of drinking water are well established. Chlorine dioxide treated finished water typically has substantially lower trihalomethane (THM) levels because ClO{sub 2} will not form chlorinated organic species as a by-product of disinfection. The THMs that are formed are probably due to chlorine from the generator or chlorine used to maintain a post-disinfection residual. An emerging regulatory issue concerning the formation of disinfection by-products (DBPs) is causing the water industry to set standards for the generation and delivery of ClO{sub 2}. The Federal Register (11 February 1994) contains language developed to limit the production of the unwanted inorganic by-products chlorite (ClO{sub 2}{sup -}), chlorate (ClO{sub 3}{sup -}), and bromate (BrO{sub 3}{sup -}) ions by requiring utilities to maintain high (95%) generation efficiencies and by limiting the amount of excess Cl{sub 2} that can be used during the generation process. The efficiency and excess Cl{sub 2} regulations may be problematic for utilities that over-chlorinate to attain chlorine dioxide high yields. Many utilities will have to decide either to reduce the amount of Cl{sub 2} used to react with sodium chlorite (NaClO{sub 2}), thereby increasing the ClO{sub 2}{sup -} residual in finished water, or over-chlorinate to increase yields and surpass the excess Cl{sub 2} limits.

  10. Carbon Dioxide-Water Emulsions for Enhanced Oil Recovery and Permanent Sequestration of Carbon Dioxide

    SciTech Connect

    Ryan, David; Golomb, Dan; Shi, Guang; Shih, Cherry; Lewczuk, Rob; Miksch, Joshua; Manmode, Rahul; Mulagapati, Srihariraju; Malepati, Chetankurmar

    2011-09-30

    This project involves the use of an innovative new invention Particle Stabilized Emulsions (PSEs) of Carbon Dioxide-in-Water and Water-in-Carbon Dioxide for Enhanced Oil Recovery (EOR) and Permanent Sequestration of Carbon Dioxide. The EOR emulsion would be injected into a semi-depleted oil reservoir such as Dover 33 in Otsego County, Michigan. It is expected that the emulsion would dislocate the stranded heavy crude oil from the rock granule surfaces, reduce its viscosity, and increase its mobility. The advancing emulsion front should provide viscosity control which drives the reduced-viscosity oil toward the production wells. The make-up of the emulsion would be subsequently changed so it interacts with the surrounding rock minerals in order to enhance mineralization, thereby providing permanent sequestration of the injected CO{sub 2}. In Phase 1 of the project, the following tasks were accomplished: 1. Perform laboratory scale (mL/min) refinements on existing procedures for producing liquid carbon dioxide-in-water (C/W) and water-in-liquid carbon dioxide (W/C) emulsion stabilized by hydrophilic and hydrophobic fine particles, respectively, using a Kenics-type static mixer. 2. Design and cost evaluate scaled up (gal/min) C/W and W/C emulsification systems to be deployed in Phase 2 at the Otsego County semi-depleted oil field. 3. Design the modifications necessary to the present CO{sub 2} flooding system at Otsego County for emulsion injection. 4. Design monitoring and verification systems to be deployed in Phase 2 for measuring potential leakage of CO{sub 2} after emulsion injection. 5. Design production protocol to assess enhanced oil recovery with emulsion injection compared to present recovery with neat CO{sub 2} flooding. 6. Obtain Federal and State permits for emulsion injection. Initial research focused on creating particle stabilized emulsions with the smallest possible globule size so that the emulsion can penetrate even low-permeability crude

  11. Recycling Carbon Dioxide into Sustainable Hydrocarbon Fuels: Electrolysis of Carbon Dioxide and Water

    NASA Astrophysics Data System (ADS)

    Graves, Christopher Ronald

    Great quantities of hydrocarbon fuels will be needed for the foreseeable future, even if electricity based energy carriers begin to partially replace liquid hydrocarbons in the transportation sector. Fossil fuels and biomass are the most common feedstocks for production of hydrocarbon fuels. However, using renewable or nuclear energy, carbon dioxide and water can be recycled into sustainable hydrocarbon fuels in non-biological processes which remove oxygen from CO2 and H2O (the reverse of fuel combustion). Capture of CO2 from the atmosphere would enable a closed-loop carbon-neutral fuel cycle. The purpose of this work was to develop critical components of a system that recycles CO2 into liquid hydrocarbon fuels. The concept is examined at several scales, beginning with a broad scope analysis of large-scale sustainable energy systems and ultimately studying electrolysis of CO 2 and H2O in high temperature solid oxide cells as the heart of the energy conversion, in the form of three experimental studies. The contributions of these studies include discoveries about electrochemistry and materials that could significantly improve the overall energy use and economics of the CO2-to-fuels system. The broad scale study begins by assessing the sustainability and practicality of the various energy carriers that could replace petroleum-derived hydrocarbon fuels, including other hydrocarbons, hydrogen, and storage of electricity on-board vehicles in batteries, ultracapacitors, and flywheels. Any energy carrier can store the energy of any energy source. This sets the context for CO2 recycling -- sustainable energy sources like solar and wind power can be used to provide the most energy-dense, convenient fuels which can be readily used in the existing infrastructure. The many ways to recycle CO2 into hydrocarbons, based on thermolysis, thermochemical loops, electrolysis, and photoelectrolysis of CO2 and/or H 2O, are critically reviewed. A process based on high temperature co

  12. U.S. Energy-Related Carbon Dioxide Emissions

    EIA Publications

    2015-01-01

    The United States has a diverse energy landscape that is reflected in differences in state-level emissions profiles. Since 2005, energy-related carbon dioxide (CO2) emissions fell in 48 states (including the District of Columbia) and rose in 3 states. EIA's latest analysis of state-level energy-related CO2 emissions includes data in both absolute and per capita terms, including details by fuel and by sector.

  13. Titanium Dioxide Volatility in High Temperature Water Vapor

    NASA Technical Reports Server (NTRS)

    Nguyen, QynhGiao N.

    2008-01-01

    Titanium (Ti) containing materials are of high interest to the aerospace industry due to its high temperature capability, strength, and light weight. As with most metals an exterior oxide layer naturally exists in environments that contain oxygen (i.e. air). At high temperatures, water vapor plays a key role in the volatility of materials including oxide surfaces. This study will evaluate cold pressed titanium dioxide (TiO2) powder pellets at a temperature range of 1400 C - 1200 C in water containing environments to determine the volatile hydroxyl species using the transpiration method. The water content ranged from 0-76 mole% and the oxygen content range was 0-100 mole % during the 20-250 hour exposure times. Preliminary results indicate that oxygen is not a key contributor at these temperatures and the following reaction is the primary volatile equation for all three temperatures: TiO2 (s) + H2O (g) = TiO(OH)2 (g).

  14. Computer code of two-phase flow in geothermal wells producing water and/or water-carbon dioxide mixtures

    SciTech Connect

    Tanka, Shouichi; Nishi, Kosuke

    1988-01-01

    Mathematical well models are developed for pure water and for water-carbon dioxide mixtures. For the slug flow regime, three correlations (Orkiszewski’s, Nicklin’s and modified Nicklin’s) are compared. An equation-of-state package for water-carbon dioxide mixtures is proposed as a function of pressure and temperature. The predicted values are compared with sixteen field cases, in which the maximum carbon dioxide content is 2.8 %.

  15. Recycling Carbon Dioxide into Sustainable Hydrocarbon Fuels: Electrolysis of Carbon Dioxide and Water

    NASA Astrophysics Data System (ADS)

    Graves, Christopher Ronald

    Great quantities of hydrocarbon fuels will be needed for the foreseeable future, even if electricity based energy carriers begin to partially replace liquid hydrocarbons in the transportation sector. Fossil fuels and biomass are the most common feedstocks for production of hydrocarbon fuels. However, using renewable or nuclear energy, carbon dioxide and water can be recycled into sustainable hydrocarbon fuels in non-biological processes which remove oxygen from CO2 and H2O (the reverse of fuel combustion). Capture of CO2 from the atmosphere would enable a closed-loop carbon-neutral fuel cycle. The purpose of this work was to develop critical components of a system that recycles CO2 into liquid hydrocarbon fuels. The concept is examined at several scales, beginning with a broad scope analysis of large-scale sustainable energy systems and ultimately studying electrolysis of CO 2 and H2O in high temperature solid oxide cells as the heart of the energy conversion, in the form of three experimental studies. The contributions of these studies include discoveries about electrochemistry and materials that could significantly improve the overall energy use and economics of the CO2-to-fuels system. The broad scale study begins by assessing the sustainability and practicality of the various energy carriers that could replace petroleum-derived hydrocarbon fuels, including other hydrocarbons, hydrogen, and storage of electricity on-board vehicles in batteries, ultracapacitors, and flywheels. Any energy carrier can store the energy of any energy source. This sets the context for CO2 recycling -- sustainable energy sources like solar and wind power can be used to provide the most energy-dense, convenient fuels which can be readily used in the existing infrastructure. The many ways to recycle CO2 into hydrocarbons, based on thermolysis, thermochemical loops, electrolysis, and photoelectrolysis of CO2 and/or H 2O, are critically reviewed. A process based on high temperature co

  16. Water cycle dynamic increases resilience of vegetation under higher atmospheric carbon dioxide concentration

    NASA Astrophysics Data System (ADS)

    Lemordant, L. A.; Gentine, P.; Stéfanon, M.; Drobinski, P. J.; Fatichi, S.

    2015-12-01

    Plant stomata couple the energy, water and carbon cycles. Photosynthesis requires stomata to open to take up carbon dioxide. In the process water vapor is released as transpiration. As atmospheric CO2 concentration rises, for the same amount of CO2 uptake, less water vapor is transpired, translating into higher water use efficiency. Reduced water vapor losses will increase soil water storage if the leaf area coverage remains similar. This will in turn alter the surface energy partitioning: more heat will be dissipated as sensible heat flux, resulting in possibly higher surface temperatures. In contrast with this common hypothesis, our study shows that the water saved during the growing season by increased WUE can be mobilized by the vegetation and help reduce the maximum temperature of mid-latitude heat waves. The large scale meteorological conditions of 2003 are the basis of four regional model simulations coupling an atmospheric model to a surface model. We performed two simulations with respectively 2003 (CTL) and 2100 (FUT) atmospheric CO2 applied to both the atmospheric and surface models. A third (RAD) and a fourth (FER) simulations are run with 2100 CO2 concentration applied to respectively the atmospheric model only and the surface model only. RAD investigates the impact of the radiative forcing, and FER the response to vegetation CO2 fertilization. Our results show that the water saved through higher water use efficiency during the growing season enabled by higher atmospheric carbon dioxide concentrations helps the vegetation to cope during severe heat and dryness conditions in the summer of mid-latitude climate. These results demonstrate that consideration of the vegetation carbon cycle is essential to model the seasonal water cycle dynamic and land-atmosphere interactions, and enhance the accuracy of the model outputs especially for extreme events. They also have important implications for the future of agriculture, water resources management, ecosystems

  17. Energy-Water Nexus

    SciTech Connect

    Horak, W.

    2010-07-26

    Conclusions of this presentation are: (1) energy and water are interconnected; (2) new energy sources will place increased demands on water supplies; (3) existing energy sources will be subjected to increasing restrictions on their water use; and (4) integrated decision support tools will need to be developed to help policy makers decide which policies and advanced technologies can address these issues.

  18. Decarb/Desal: Separation of Carbon Dioxide from Flue Gas with Simultaneous Fresh Water Production

    SciTech Connect

    Aines, R; Bourcier, W

    2009-10-21

    If fossil fuels continue to be a major part of the world's energy supply, effective means must be developed to deal with the carbon emissions. Geologic sequestration of supercritical CO{sub 2} is expected to play a major role in mitigating this problem. Separating carbon dioxide from other gases is the most costly aspect of schemes for geologic sequestration. That cost is driven by the complexity and energy intensity of current chemical-stripping methods for separating carbon dioxide. Our experience in water treatment technology indicated that an entirely new approach could be developed, taking advantage of water's propensity to separate gases that ionize in water (like CO{sub 2}) from those that do not (like N{sub 2}). Even though water-based systems might not have the extreme selectivity of chemicals like substituted amines used in industrial systems today, they have the potential to tolerate NO{sub x}, SO{sub x}, and particulates while also producing clean drinking water as a valuable byproduct. Lower capital cost, broader range of applicability, environmental friendliness, and revenue from a second product stream give this approach the potential to significantly expand the worldwide application of carbon separation for geologic sequestration. Here we report results for separation of CO{sub 2} from flue gas by two methods that simultaneously separate carbon dioxide and fresh water: ionic pumping of carbonate ions dissolved in water, and thermal distillation. The ion pumping method dramatically increases dissolved carbonate ion in solution and hence the overlying vapor pressure of CO{sub 2} gas, allowing its removal as a pure gas. We have used two common water treatment methods to drive the ion pumping approach, reverse osmosis and electrodialysis to produce pure CO{sub 2}. This novel approach to increasing the concentration of the extracted gas permits new approaches to treating flue gas, because the slightly basic water used as the extraction medium is

  19. Ground water and energy

    SciTech Connect

    Not Available

    1980-11-01

    This national workshop on ground water and energy was conceived by the US Department of Energy's Office of Environmental Assessments. Generally, OEA needed to know what data are available on ground water, what information is still needed, and how DOE can best utilize what has already been learned. The workshop focussed on three areas: (1) ground water supply; (2) conflicts and barriers to ground water use; and (3) alternatives or solutions to the various issues relating to ground water. (ACR)

  20. IDENTIFICATION OF DRINKING WATER DISINFECTION BY-PRODUCTS FROM OZONE, CHLORINE DIOXIDE, CHLORAMINE, AND CHLORINE

    EPA Science Inventory

    Many drinking water treatment plants are currently using alternative disinfectants to treat drinking water, with ozone, chlorine dioxide, and chloramine being the most popular. However, compared to chlorine, which has been much more widely studied, there is little information abo...

  1. Saving Water Saves Energy

    SciTech Connect

    McMahon, James E.; Whitehead, Camilla Dunham; Biermayer, Peter

    2006-06-15

    Hot water use in households, for showers and baths as wellas for washing clothes and dishes, is a major driver of household energyconsumption. Other household uses of water (such as irrigatinglandscaping) require additional energy in other sectors to transport andtreat the water before use, and to treat wastewater. In California, 19percent of total electricity for all sectors combined and 32 percent ofnatural gas consumption is related to water. There is a criticalinterdependence between energy and water systems: thermal power plantsrequire cooling water, and water pumping and treatment require energy.Energy efficiency can be increased by a number of means, includingmore-efficient appliances (e.g., clothes washers or dishwashers that useless total water and less heated water), water-conserving plumbingfixtures and fittings (e.g., showerheads, faucets, toilets) and changesin consumer behavior (e.g., lower temperature set points for storagewater heaters, shorter showers). Water- and energy-conserving activitiescan help offset the stress imposed on limited water (and energy) suppliesfrom increasing population in some areas, particularly in drought years,or increased consumption (e.g., some new shower systems) as a result ofincreased wealth. This paper explores the connections between householdwater use and energy, and suggests options for increased efficiencies inboth individual technologies and systems. Studies indicate that urbanwater use can be reduced cost-effectively by up to 30 percent withcommercially available products. The energy savings associated with watersavings may represent a large additional and largely untappedcost-effective opportunity.

  2. Percolation in concentrated water-in-carbon dioxide microemulsions

    SciTech Connect

    Lee, C.T. Jr.; Bhargava, P.; Johnston, K.P.

    2000-05-11

    The phase behavior and electrical conductivity of water-in-carbon dioxide (W/C) microemulsions are reported over a range of temperatures (5--65 C), pressures (100--450 bar), and droplet volume fractions ({phi} = 0.0347-0.483) at a constant water-to-surfactant molar ratio (W{sub o}) of 12.5. A {phi} of 0.483 is a 5-fold increase over those reported previously. A critical point is observed at a droplet volume fraction of approximately 0.12, at which the single-phase microemulsion splits into two microemulsion phases of similar volume upon lowering the pressure (upper critical solution pressure). At low temperatures, a lower critical solution pressure is also observed upon increasing the pressure. Both of the critical solution pressures result from an increase in the attractive interdroplet interactions; consequently, pressure has little effect on the conductivity in the one-phase region. The conductivity increases nearly 3 orders of magnitude with changes in the droplet concentration or temperature. Scaling analysis of the conductivity data supports a dynamic percolation model, whereby the attractive interdroplet interactions form clusters of discrete droplets with rapid charge transport.

  3. Alkali metal carbon dioxide electrochemical system for energy storage and/or conversion of carbon dioxide to oxygen

    NASA Technical Reports Server (NTRS)

    Hagedorn, Norman H. (Inventor)

    1993-01-01

    An alkali metal, such as lithium, is the anodic reactant; carbon dioxide or a mixture of carbon dioxide and carbon monoxide is the cathodic reactant; and carbonate of the alkali metal is the electrolyte in an electrochemical cell for the storage and delivery of electrical energy. Additionally, alkali metal-carbon dioxide battery systems include a plurality of such electrochemical cells. Gold is a preferred catalyst for reducing the carbon dioxide at the cathode. The fuel cell of the invention produces electrochemical energy through the use of an anodic reactant which is extremely energetic and light, and a cathodic reactant which can be extracted from its environment and therefore exacts no transportation penalty. The invention is, therefore, especially useful in extraterrestrial environments.

  4. Liquid-solid transition of water confined in nanoporous titanium dioxide

    NASA Astrophysics Data System (ADS)

    Gao, Xin; Wang, Qiang; Sun, Gang; Li, Chenxi; Hu, Lin

    2016-07-01

    In this work, we performed differential scanning calorimetry (DSC) experiments to investigate the phase transition temperature and the molar enthalpy of the absorbed water confined in porous titanium dioxide. The porous titanium dioxide with three different pore size distribution and different filling fraction of the absorbed water were examined. We found that both the pore size of the examined samples and the filling fraction of the absorbed water affected the water’s phase transition temperature and its molar enthalpy.

  5. EFFECT OF CHLORINE DIOXIDE AND ITS METABOLITES IN DRINKING WATER ON FETAL DEVELOPMENT IN RATS

    EPA Science Inventory

    The chlorination of surface waters is known to form trihalomethanes. Therefore, chlorine dioxide (CIO2) is being considered as an alternative disinfectant. This study was designed to determine the effect of chlorine dioxide and its metabolites, chlorite (CIO2) and chlorate (CIO3)...

  6. Carbon dioxide and water vapour fluxes for one year above a temperate grazed grassland

    NASA Astrophysics Data System (ADS)

    Jaksic, V.; Kiely, G.; Albertson, J.; Scanlon, T.

    2003-04-01

    The Dripsey flux site in Cork, Ireland is a perennial ryegrass (C3 category) pasture and is grazed for approximately 8 to 10 months of the year. The lands are fertilised with approximately 200kg/ha/year of nitrogen. The flux tower monitoring carbon dioxide, water vapour and energy was established in June 2001 and we have continuous data since then. The site also includes streamflow hydrology and stream water chemistry. We present the results and analysis for carbon dioxide and water vapour for the year July 1, 2001 to July 1, 2002. The accumulated evapotranspiration amounts to 522mm/annum compared to 1600mm/annum of rainfall. The one year carbon sequestration is 3.9t/ha. The estimated carbon in the grass and silage is 3.6t/ha. This suggests that the soils in these pastures are a sink for approximately 0.3t carbon per hectare. This work is part of a five year (2002-2006) research project funded by the Irish Environmental Protection Agency.

  7. Carbon Dioxide in Exoplanetary Atmospheres: Rarely Dominant Compared to Carbon Monoxide and Water in Hot, Hydrogen-dominated Atmospheres

    NASA Astrophysics Data System (ADS)

    Heng, Kevin; Lyons, James R.

    2016-02-01

    We present a comprehensive study of the abundance of carbon dioxide in exoplanetary atmospheres in hot, hydrogen-dominated atmospheres. We construct novel analytical models of systems in chemical equilibrium that include carbon monoxide, carbon dioxide, water, methane and acetylene and relate the equilibrium constants of the chemical reactions to temperature and pressure via the tabulated Gibbs free energies. We prove that such chemical systems may be described by a quintic equation for the mixing ratio of methane. By examining the abundances of these molecules across a broad range of temperatures (spanning equilibrium temperatures from 600 to 2500 K), pressures (via temperature-pressure profiles that explore albedo and opacity variations) and carbon-to-oxygen ratios, we conclude that carbon dioxide is subdominant compared to carbon monoxide and water. Atmospheric mixing does not alter this conclusion if carbon dioxide is subdominant everywhere in the atmosphere. Carbon dioxide and carbon monoxide may attain comparable abundances if the metallicity is greatly enhanced, but this property is negated by temperatures above 1000 K. For hydrogen-dominated atmospheres, our generic result has the implication that retrieval studies may wish to set the subdominance of carbon dioxide as a prior of the calculation and not let its abundance completely roam free as a fitting parameter, because it directly affects the inferred value of the carbon-to-oxygen ratio and may produce unphysical conclusions. We discuss the relevance of these implications for the hot Jupiter WASP-12b and suggest that some of the previous results are chemically impossible. The relative abundance of carbon dioxide to acetylene is potentially a sensitive diagnostic of the carbon-to-oxygen ratio.

  8. Condensation of water vapor and carbon dioxide in the jet exhausts of rocket engines: 1. Heterogeneous condensation of combustion products

    NASA Astrophysics Data System (ADS)

    Platov, Yu. V.; Semenov, A. I.; Filippov, B. V.

    2014-01-01

    Condensation of water vapor and carbon dioxide in the jet exhausts of rocket engines during last stages of Proton, Molniya, and Start launchers operating in the upper atmospheric with different types of fuels is considered. Particle heating is taken into account with emission of latent heat of condensation and energy loss due to radiation and heat exchange with combustion products. Using the solution of the heat balance and condensed particle mass equations, the temporal change in the temperature and thickness of the condensate layer is obtained. Practically, no condensation of water vapor and carbon dioxide in the jet exhaust of a Start launcher occurs. In plumes of Proton and Molniya launchers, the condensation of water vapor and carbon dioxide can start at distances of 120-170 m and 450-650 m from the engine nozzle, respectively. In the course of condensation, the thickness of the "water" layer on particles can exceed 100 Å, and the thickness of carbon dioxide can exceed 60 Å.

  9. Influence of drinking water treatments on chlorine dioxide consumption and chlorite/chlorate formation.

    PubMed

    Sorlini, Sabrina; Gialdini, Francesca; Biasibetti, Michela; Collivignarelli, Carlo

    2014-05-01

    Disinfection is the last treatment stage of a Drinking Water Treatment Plant (DWTP) and is carried out to maintain a residual concentration of disinfectant in the water distribution system. Chlorine dioxide (ClO2) is a widely used chemical employed for this purpose. The aim of this work was to evaluate the influence of several treatments on chlorine dioxide consumption and on chlorite and chlorate formation in the final oxidation/disinfection stage. A number of tests was performed at laboratory scale employing water samples collected from the DWTP of Cremona (Italy). The following processes were studied: oxidation with potassium permanganate, chlorine dioxide and sodium hypochlorite, coagulation/flocculation with ferric chloride and aluminum sulfate, filtration and adsorption onto activated carbon. The results showed that the chlorine dioxide demand is high if sodium hypochlorite or potassium permanganate are employed in pre-oxidation. On the other hand, chlorine dioxide leads to the highest production of chlorite and chlorate. The coagulation/flocculation process after pre-oxidation shows that chlorine dioxide demand decreases if potassium permanganate is employed as an oxidant, both with ferric chloride and aluminum sulfate. Therefore, the combination of these processes leads to a lower production of chlorite and chlorate. Aluminum sulfate is preferable in terms of the chlorine dioxide demand reduction and minimization of the chlorite and chlorate formation. Activated carbon is the most effective solution as it reduced the chlorine dioxide consumption by about 50% and the DBP formation by about 20-40%. PMID:24534637

  10. A more energy efficient product for carbon dioxide separation

    SciTech Connect

    Niswander, R.H.; Edwards, D.J.; DuPart, M.S.; Tse, J.P.

    1993-01-01

    Aqueous solutions of alkanolamines such as monoethanolamine (MEA) have been used for years to separate carbon dioxide and hydrogen sulfide from other gases in continuous absorption/desorption processes to meet very low treated gas specifications. However, MEA can undergo side reactions with CO{sub 2} which produce various types of degradation compounds. These by-products reduce performance of the solvent leading to increased energy consumption and corrosion. This can be a serious problem in applications such as the removal of CO{sub 2} in synthesis gas and natural gas treating with down stream cryogenic equipment. Formulated alkanolamine products based on methyldiethanolamine (MDEA) have made significant advances in energy efficiency, but are still susceptible to degradation and decreased performance. A next generation product, GAS/SPEC CS-PLUS, has now been developed and shown to be even more energy efficient. In addition, it improves separation and overall capacity while maintaining long term performance.

  11. MULTISPECTRAL IDENTIFICATION OF CHLORINE DIOXIDE BYPRODUCTS IN DRINKING WATER

    EPA Science Inventory

    This paper discusses the identification of organic disinfectant byproducts (DNPS) at a pilot plant in Evansville, IN, that uses chlorine dioxide as a primary disinfectant. nconventional multispectral identification techniques (gas chromatography combined with high- and low-resolu...

  12. MULTISPECTRAL IDENTIFICATION OF CHLORINE DIOXIDE DISINFECTION BYPRODUCTS IN DRINKING WATER

    EPA Science Inventory

    This paper discusses the identification of organic disinfection byproducts (DBPs) at a pilot plant in Evansville, IN, which uses chlorine dioxide as a primary disinfectant. Unconventional multispectral identification techniques (gas chromatography combined with high- and low reso...

  13. IDENTIFICATION OF CHLORINE DIOXIDE AND CHLORAMINE DRINKING WATER DISINFECTION BY-PRODUCTS

    EPA Science Inventory

    Due to concern over the potential adverse health effects of trihalomethanes (THMs) and other chlorinated by-products in chlorinated drinking water, alternative disinfection methods are being explored. Chlorine dioxide and chloramine are two popular alternative disinfectants, with...

  14. IDENTIFICATION OF NEW DRINKING WATER DISINFECTION BY-PRODUCTS FROM OZONE, CHLORINE DIOXIDE, CHLORAMINE, AND CHLORINE

    EPA Science Inventory

    Due to concern over the potential adverse health effects of trihalomethanes (THMs) and other chlorinated by-products in chlorinated drinking water, alternative disinfection methods are being explored. Ozone, chlorine dioxide, and chloramine are currently popular alternatives to ...

  15. IDENTIFICATION OF CHLORINE DIOXIDE DRINKING WATER DISINFECTION BY-PRODUCTS FORMED AT HIGH BROMIDE LEVELS

    EPA Science Inventory

    Due to concern over the potential adverse health effects of trihalomethanes (THMs), haloacetic acids, and other chlorinated by-products in chlorinated drinking water, alternative disinfection methods are being explored. Chlorine dioxide is a popular alternative, with over 500 dri...

  16. Carbon dioxide and water adsorption on highly epitaxial Delafossite CuFeO2 thin film

    NASA Astrophysics Data System (ADS)

    Rojas, S.; Joshi, T.; Borisov, P.; Sarabia, M.; Lederman, D.; Cabrera, A. L.

    2015-03-01

    Thermal programmed desorption (TPD) of CO2 and H2O from a 200 nm thick CuFeO2 Delafossite surface was performed in a standard UHV chamber, The CuFeO2 thin film grown using Pulsed Laser Deposition (PLD) over an Al2O3 (0001) substrate with controlled O2 atmosphere resulted with highly epitaxial crystal structure. The adsorption/desorption of CO2 and H2O process was also monitored with X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES). Our results revealed that carbon dioxide interacts with CuFeO2 forming Fe carbonates compounds on its surface. Hydroxides were also formed on the surface due to water presence. Using TPD data, Arrhenius plots for CO2 and water desorption were done and activation energy for desorption was obtained. Funds FONDECyT 1130372; Thanks to P. Ferrari.

  17. Sunlight-induced carbon dioxide emissions from inland waters

    NASA Astrophysics Data System (ADS)

    Koehler, Birgit; Landelius, Tomas; Weyhenmeyer, Gesa A.; Machida, Nanako; Tranvik, Lars J.

    2014-07-01

    The emissions of carbon dioxide (CO2) from inland waters are substantial on a global scale. Yet the fundamental question remains open which proportion of these CO2 emissions is induced by sunlight via photochemical mineralization of dissolved organic carbon (DOC), rather than by microbial respiration during DOC decomposition. Also, it is unknown on larger spatial and temporal scales how photochemical mineralization compares to other C fluxes in the inland water C cycle. We combined field and laboratory data with atmospheric radiative transfer modeling to parameterize a photochemical rate model for each day of the year 2009, for 1086 lakes situated between latitudes from 55°N to 69°N in Sweden. The sunlight-induced production of dissolved inorganic carbon (DIC) averaged 3.8 ± 0.04 g C m-2 yr-1, which is a flux comparable in size to the organic carbon burial in the lake sediments. Countrywide, 151 ± 1 kt C yr-1 was produced by photochemical mineralization, corresponding to about 12% of total annual mean CO2 emissions from Swedish lakes. With a median depth of 3.2 m, the lakes were generally deep enough that incoming, photochemically active photons were absorbed in the water column. This resulted in a linear positive relationship between DIC photoproduction and the incoming photon flux, which corresponds to the absorbed photons. Therefore, the slope of the regression line represents the wavelength- and depth-integrated apparent quantum yield of DIC photoproduction. We used this relationship to obtain a first estimate of DIC photoproduction in lakes and reservoirs worldwide. Global DIC photoproduction amounted to 13 and 35 Mt C yr-1 under overcast and clear sky, respectively. Consequently, these directly sunlight-induced CO2 emissions contribute up to about one tenth to the global CO2 emissions from lakes and reservoirs, corroborating that microbial respiration contributes a substantially larger share than formerly thought, and generate annual C fluxes similar in

  18. The vitiation effects of water vapor and carbon dioxide on the autoignition characteristics of kerosene

    NASA Astrophysics Data System (ADS)

    Liang, Jin-Hu; Wang, Su; Zhang, Sheng-Tao; Yue, Lian-Jie; Fan, Bing-Cheng; Zhang, Xin-Yu; Cui, Ji-Ping

    2014-08-01

    In ground tests of hypersonic scramjet, the high-enthalpy airstream produced by burning hydrocarbon fuels often contains contaminants of water vapor and carbon dioxide. The contaminants may change the ignition characteristics of fuels between ground tests and real flights. In order to properly assess the influence of the contaminants on ignition characteristics of hydrocarbon fuels, the effect of water vapor and carbon dioxide on the ignition delay times of China RP-3 kerosene was studied behind reflected shock waves in a preheated shock tube. Experiments were conducted over a wider temperature range of 800-1 500K, at a pressure of 0.3 MPa, equivalence ratios of 0.5 and 1, and oxygen concentration of 20%. Ignition delay times were determined from the onset of the excited radical OH emission together with the pressure profile. Ignition delay times were measured for four cases: (1) clean gas, (2) gas vitiated with 10% and 20% water vapor in mole, (3) gas vitiated with 10% carbon dioxide in mole, and (4) gas vitiated with 10% water vapor and 10% carbon dioxide, 20% water vapor and 10% carbon dioxide in mole. The results show that carbon dioxide produces an inhibiting effect at temperatures below 1 300 K when ϕ = 0.5, whereas water vapor appears to accelerate the ignition process below a critical temperature of about 1 000 K when ϕ = 0.5. When both water vapor and carbon dioxide exist together, a minor inhibiting effect is observed at ϕ = 0.5, while no effect is found at ϕ = 1.0. The results are also discussed preliminary by considering both the combustion reaction mechanism and the thermophysics properties of the fuel mixtures. The current measurements demonstrate vitiation effects of water vapor and carbon dioxide on the autoignition characteristics of China RP-3 kerosene at air-like O2 concentration. It is important to account for such effects when data are extrapolated from ground testing to real flight conditions.

  19. Energy and Water Management

    NASA Technical Reports Server (NTRS)

    Valek, Susan E.

    2008-01-01

    Energy efficiency isn't just a good idea; it's a necessity, both for cost reasons and to meet federal regulatory requirements. First, rising energy unit costs continue to erode NASA's mission budget. NASA spent roughly $156M on facility energy in FY 2007. Although that represents less than one per cent of NASA's overall annual budget, the upward trend in energy costs concerns the agency. While NASA reduced consumption 13%, energy unit costs have risen 63%. Energy cost increases counteract the effects of energy conservation, which results in NASA buying less yet spending more. The second factor is federal energy legislation. The National Energy Conservation Policy Act, as amended by the Energy Policy Act of 2005, Executive Order (EO) 13423 (January, 2007), and the Energy Independence and Security Act (December, 2007), mandates energy/water conservation goals for all federal agencies, including NASA. There are also reporting requirements associated with this legislation. The Energy/Water Management Task was created to support NASA Headquarters Environmental Management Division (HO EMD) in meeting these requirements. With assistance from TEERM, HQ EMD compiled and submitted the NASA Annual Report to the Department of Energy FY 2007. The report contains information on how NASA is meeting federally mandated energy and water management goals. TEERM monitored input for timeliness, errors, and conformity to the new energy/water reporting guidelines and helped compile the information into the final report. TEERM also assists NASA Energy/Water Management with proposal and award calls, updates to the energy/water management database, and facilitating communication within the energy/water management community. TEERM is also supporting NASA and the Interagency Working Group (IWG) on Hydrogen and Fuel Cells. Established shortly after the President announced the Hydrogen Fuel Initiative in 2003, this IWG serves as the mechanism for collaboration among the Federal agencies

  20. PERFORMANCE IMPROVEMENTS IN COMMERCIAL HEAT PUMP WATER HEATERS USING CARBON DIOXIDE

    SciTech Connect

    BOWERS C.D.; ELBEL S.; PETERSEN M.; HRNJAK P.S.

    2011-07-01

    Although heat pump water heaters are today widely accepted in Japan, where energy costs are high and government incentives for their use exist, acceptance of such a product in the U.S. has been slow. This trend is slowly changing with the introduction of heat pump water heaters into the residential market, but remains in the commercial sector. Barriers to heat pump water heater acceptance in the commercial market have historically been performance, reliability and first/operating costs. The use of carbon dioxide (R744) as the refrigerant in such a system can improve performance for relatively small increase in initial cost and make this technology more appealing. What makes R744 an excellent candidate for use in heat pump water heaters is not only the wide range of ambient temperatures within which it can operate, but also the excellent ability to match water to refrigerant temperatures on the high side, resulting in very high exit water temperatures of up to 82ºC (180ºF), as required by sanitary codes in the U.S.(Food Code, 2005), in a single pass, temperatures that are much more difficult to reach with other refrigerants. This can be especially attractive in applications where this water is used for the purpose of sanitation. While reliability has also been of concern historically, dramatic improvements have been made over the last several years through research done in the automotive industry and commercialization of R744 technology in residential water heating mainly in Japan. This paper presents the performance results from the development of an R744 commercial heat pump water heater of approximately 35kW and a comparison to a baseline R134a unit of the same capacity and footprint. In addition, recommendations are made for further improvements of the R744 system which could result in possible energy savings of up to 20%.

  1. Energy and Water

    ERIC Educational Resources Information Center

    Harte, John; El-Gasseir, Mohamed

    1978-01-01

    The water consumption requirements for a variety of energy options are presented, and comparative judgments drawn. Attention is focused on problems resulting from synthetic, gaseous, and liquid fuel production. Scenarios describing possible future levels of coal and electricity use are analyzed. They point to the importance of water supply…

  2. Carbon dioxide and energy fluxes over a small boreal lake in Southern Finland

    NASA Astrophysics Data System (ADS)

    Mammarella, Ivan; Nordbo, Annika; Rannik, Üllar; Haapanala, Sami; Levula, Janne; Laakso, Heikki; Ojala, Anne; Peltola, Olli; Heiskanen, Jouni; Pumpanen, Jukka; Vesala, Timo

    2015-07-01

    Dynamics of carbon dioxide and energy exchange over a small boreal lake were investigated. Flux measurements have been carried out by the eddy covariance technique during two open-water periods (June-October) at Lake Kuivajärvi in Finland. Sensible heat (H) flux peaked in the early morning, and upward sensible heat flux at night results in unstable stratification over the lake. Minimum H was measured in the late afternoon, often resulting in adiabatic conditions or slightly stable stratification over the lake. The latent heat flux (LE) showed a different pattern, peaking in the afternoon and having a minimum at night. High correlation (r2 = 0.75) between H and water-air temperature difference multiplied by wind speed (U) was found, while LE strongly correlated with the water vapor pressure deficit multiplied by U (r2 = 0.78). Monthly average values of energy balance closure ranged between 70 and 99%. The lake acted as net source of carbon dioxide, and the measured flux (FCO2) averaged over the two open-water periods (0.7 µmol m-2 s-1) was up to 3 times higher than those reported in other studies. Furthermore, it was found that during period of high wind speed (>3 m s-1) shear-induced water turbulence controls the water-air gas transfer efficiency. However, under calm nighttime conditions, FCO2 was poorly correlated with the difference between the water and the equilibrium CO2 concentrations multiplied by U. Nighttime cooling of surface water enhances the gas transfer efficiency through buoyancy-driven turbulent mixing, and simple wind speed-based transfer velocity models strongly underestimate FCO2.

  3. Low energy decomposition of carbon dioxide and other molecules

    NASA Astrophysics Data System (ADS)

    Pamfiloff, Eugene

    2013-05-01

    Since the observation of elevating quantities of atmospheric greenhouse gases, finding a practical method other than the capture-and-sequestration scheme for the reduction and disposal of carbon dioxide (CO2) has been an important objective. Recently, an efficient low-energy process has been developed allowing the selective molecular decomposition of CO2, CO, and other molecules. Thus, CO2 can be broken down into C + O + O. This permits the O2 molecules to be stored or released while the clean carbon atoms can be bagged and utilized in various industries. For the control of carbon dioxide or other gas emissions at their source, it can be scaled up for power plants or down for smaller facilities. The process also allows the production of a beam of exclusively positive ions or exclusively negative ions and contrary to other devices, excludes the probability of beam contamination by plasma or neutral particles, making it ideal for electronic thin-films manufacturing and spectroscopy systems. Because the system allows the simultaneous production of ion beams containing selectable ratios of positive to negative ions, it simplifies construction of favored or complex molecules through varied ionic bonds. Also discussed are several methods to apply the new technology as an upgrade to spectrometers and other devices. For further information contact the author: epamfiloff@mattertech.com.

  4. Estuary Turbulence and Air-Water Carbon Dioxide Exchange

    NASA Astrophysics Data System (ADS)

    Orton, Philip Mark

    The mixing of constituents between estuarine bottom and surface waters or between estuarine surface waters and the atmosphere are two topics of growing interest, in part due to the potentially important role of estuaries in global carbon budgets. These two types of mixing are typically driven by turbulence, and a research project was developed to improve the scientific understanding of atmospheric and tidal controls on estuary turbulence and airwater exchange processes. Highlights of method development and field research on the Hudson River estuary include several deployments of bottom mounted current profilers to quantify the turbulent kinetic energy (TKE) budget, and construction and deployment of an instrumented catamaran that makes autonomous measurements of air-water CO2 exchange (FCO2), water TKE dissipation at 50 cm depth (epsilon50), and other physical properties just above and below the air-water interface. On the Hudson, wind correlates strongly with epsilon50, but surface water speed and airwater heat flux also have moderate correlations with epsilon50. In partially mixed estuaries such as the Hudson, as well as salt wedge estuaries, baroclinic pressure forcing typically causes spring ebb tides to have much stronger upper water column shear than flood tides. The Hudson data are used to show that this shear leads to local shear instability and stronger near-surface turbulence on spring ebbs. Also, buoyancy budget terms are compared to demonstrate how water-to-air heat fluxes can influence stratification and indirectly influence epsilon50. Looking more closely at the role of wind forcing, it is demonstrated that inland propagation of the sea breeze on warm sunny days leads to arrival in phase with peak solar forcing at seaward stations, but several hours later at up-estuary stations. Passage of the sea breeze front raises the air-water CO2 flux by 1-2 orders of magnitude, and drives epsilon50 comparable to spring tide levels in the upper meter of the water

  5. Water-wetting surfaces as hydrate promoters during transport of carbon dioxide with impurities.

    PubMed

    Kuznetsova, Tatiana; Jensen, Bjørnar; Kvamme, Bjørn; Sjøblom, Sara

    2015-05-21

    Water condensing as liquid drops within the fluid bulk has traditionally been the only scenario accepted in the industrial analysis of hydrate risks. We have applied a combination of absolute thermodynamics and molecular dynamics modeling to analyze the five primary routes of hydrate formation in a rusty pipeline carrying dense carbon dioxide with methane, hydrogen sulfide, argon, and nitrogen as additional impurities. We have revised the risk analysis of all possible routes in accordance with the combination of the first and the second laws of thermodynamics to determine the highest permissible content of water. It was found that at concentrations lower than five percent, hydrogen sulfide will only support the formation of carbon dioxide-dominated hydrate from adsorbed water and hydrate formers from carbon dioxide phase rather than formation in the aqueous phase. Our results indicate that hydrogen sulfide leaving carbon dioxide for the aqueous phase will be able to create an additional hydrate phase in the aqueous region adjacent to the first adsorbed water layer. The growth of hydrate from different phases will decrease the induction time by substantially reducing the kinetically limiting mass transport across the hydrate films. Hydrate formation via adsorption of water on rusty walls will play the decisive role in hydrate formation risk, with the initial concentration of hydrogen sulfide being the critical factor. We concluded that the safest way to eliminate hydrate risks is to ensure that the water content of carbon dioxide is low enough to prevent water dropout via the adsorption mechanism. PMID:25903085

  6. Transport properties of carbon dioxide and ammonia in water - ethylene glycol mixtures from molecular dynamics simulations

    NASA Astrophysics Data System (ADS)

    Iskrenova, Eugeniya; Patnaik, Soumya S.

    2015-03-01

    The endothermic decomposition of ammonium carbamate has been proposed as a novel heat sink mechanism for aircraft thermal management (Johnson et al. SAE Technical Paper 2012-01-2190, 2012, doi:10.4271/2012-01-2190]). The products of this decomposition are carbon dioxide and ammonia which need to be efficiently removed in order to better control the decomposition reaction. Molecular dynamics simulations can provide insight into the transport properties of carbon dioxide and ammonia in the carrier fluid. In this work, an extensive set of molecular dynamics simulations was performed to better quantify the concentration dependence of solubility and diffusivity of carbon dioxide and ammonia in water, ethylene glycol, and their mixtures at standard temperature and pressure and at elevated temperature. The simulation results confirm the experimental observations that ammonia is more soluble than carbon dioxide in either water or ethylene glycol and that both carbon dioxide and ammonia are more soluble in ethylene glycol than in water. The simulations of water - ethylene glycol mixtures show that increasing the molar fraction of ethylene glycol leads to increased solubility of carbon dioxide and ammonia in the mixture. The authors gratefully acknowledge the DoD High Performance Computing Centers for computational resources.

  7. Strain fields and line energies of dislocations in uranium dioxide

    NASA Astrophysics Data System (ADS)

    Parfitt, David C.; Bishop, Clare L.; Wenman, Mark R.; Grimes, Robin W.

    2010-05-01

    Computer simulations are used to investigate the stability of typical dislocations in uranium dioxide. We explain in detail the methods used to produce the dislocation configurations and calculate the line energy and Peierls barrier for pure edge and screw dislocations with the shortest Burgers vector {1\\over 2} \\langle 110 \\rangle . The easiest slip system is found to be the {100}lang110rang system for stoichiometric UO2, in agreement with experimental observations. We also examine the different strain fields associated with these line defects and the close agreement between the strain field predicted by atomic scale models and the application of elastic theory. Molecular dynamics simulations are used to investigate the processes of slip that may occur for the three different edge dislocation geometries and nudged elastic band calculations are used to establish a value for the Peierls barrier, showing the possible utility of the method in investigating both thermodynamic average behaviour and dynamic processes such as creep and plastic deformation.

  8. MANGANESE DIOXIDE COATED FILTERS FOR REMOVING RADIUM FROM DRINKING WATER

    EPA Science Inventory

    Research was performed using manganese dioxide (MnO2) to demonstrate that above pH3 cations are adsorbed from solution in the order of their affinity, and that the interaction is characterized by the pH dependence of the metal. The relationship of the zero point charge of pH and ...

  9. Adsorption of water and carbon dioxide on hematite and consequences for possible hydrate formation.

    PubMed

    Kvamme, Bjørn; Kuznetsova, Tatiana; Kivelae, Pilvi-Helina

    2012-04-01

    The interest in carbon dioxide for enhanced oil recovery is increasing proportional to the decline in naturally driven oil production and also due to the increasing demand for reduced emission of carbon dioxide into the atmosphere. Transport of carbon dioxide in offshore pipelines involves high pressure and low temperatures, conditions which may lead to formation of hydrates from residual water dissolved in carbon dioxide and carbon dioxide. The critical question is whether the water at certain temperatures and pressures will drop out as liquid droplets first, and then form hydrates, or alternatively, adsorb on the pipeline surfaces, and subsequently form hydrates heterogeneously. In this work, we used several different basis sets of density functional theory in ab initio calculations to estimate the charge distribution of hematite (the dominating component of rust) crystals. These rust particles were embedded in water and chemical potential for adsorbed water molecules was estimated through thermodynamic integration and compared to similar estimates for water clusters of the same size. While the generated charges were not unique, the use of high order approximations and different basis sets provides a range of likely charge distributions. Values obtained for the chemical potential of water in different surroundings indicated that it would be thermodynamically favorable for water to adsorb on hematite, and that evaluation of potential carbon dioxide hydrate formation conditions and kinetics should be based on this formation mechanism. Depending on the basis set and approximations, the estimated gain for water to adsorb on the hematite surface rather than condense as droplets varied between -1.7 kJ mole(-1) and -3.4 kJ mole(-1). The partial charge distribution on the hematite surface is incompatible with the hydrate structure, and thus hydrates will be unable to attach to the surface. The behavior of water outside the immediate vicinity of hematite (beyond 3

  10. Microbial production of multi-carbon chemicals and fuels from water and carbon dioxide using electric current

    SciTech Connect

    Lovley, Derek R; Nevin, Kelly

    2015-11-03

    The invention provides systems and methods for generating organic compounds using carbon dioxide as a source of carbon and electrical current as an energy source. In one embodiment, a reaction cell is provided having a cathode electrode and an anode electrode that are connected to a source of electrical power, and which are separated by a permeable membrane. A biological film is provided on the cathode. The biological film comprises a bacterium that can accept electrons and that can convert carbon dioxide to a carbon-bearing compound and water in a cathode half-reaction. At the anode, water is decomposed to free molecular oxygen and solvated protons in an anode half-reaction. The half-reactions are driven by the application of electrical current from an external source. Compounds that have been produced include acetate, butanol, 2-oxobutyrate, propanol, ethanol, and formate.

  11. Low-energy positron and electron scattering from nitrogen dioxide

    NASA Astrophysics Data System (ADS)

    Chiari, Luca; Zecca, Antonio; García, Gustavo; Blanco, Francisco; Brunger, M. J.

    2013-12-01

    Total cross section (TCS) measurements for positron scattering from nitrogen dioxide (NO2) are presented in the energy range 0.2-40 eV. The TCS, the elastic integral and differential cross sections, and the integral cross section accounting of all the inelastic processes (including positronium formation) have also been computed using the independent atom model with screening corrected additivity rule (IAM-SCAR) for incident energies from 1 to 1000 eV. A qualitative level of agreement is found between the present TCS experiment and theory at the common energies. As no previous measurements or calculations for positron-NO2 scattering exist in the literature, we also computed the TCS for electron collisions with NO2 employing the IAM-SCAR method. A comparison of those results to the present positron cross sections and the earlier electron-impact data and calculations is provided. To investigate the role that chemical substitution plays in positron scattering phenomena, we also compare the present positron-NO2 data with the TCSs measured at the University of Trento for positron scattering from N2O and CO2.

  12. Response of vegetation to carbon dioxide. Growth, yield and plant water relationships in sweet potatoes in response to carbon dioxide enrichment 1986

    SciTech Connect

    1998-08-01

    In the summer of 1985, under the joint program of US Department of Energy, Carbon Dioxide Division, and Tuskegee University, experiments were conducted to study growth, yield, photosynthesis and plant water relationships in sweet potato plants growth in an enriched CO{sub 2} environment. The main experiment utilized open top chambers to study the effects of CO{sub 2} and soil moisture on growth, yield and photosynthesis of field-grown plants. In addition, potted plants in open top chambers were utilized in a study of the effects of different CO{sub 2} concentrations on growth pattern, relative growth rate, net assimilation rate and biomass increment at different stages of development. The interaction effects of enriched CO{sub 2} and water stress on biomass production, yield, xylem potential, and stomatal conductance were also investigated. The overall results of the various studies are described.

  13. Effects of doubled carbon dioxide on rainfall responses to radiative processes of water clouds

    NASA Astrophysics Data System (ADS)

    Li, Xiaofan; Li, Tingting; Lou, Lingyun

    2014-12-01

    The effects of doubled carbon dioxide on rainfall responses to radiative processes of water clouds are investigated in this study. Two groups of two-dimensional cloud-resolving model sensitivity experiments with regard to pre-summer heavy rainfall around the summer solstice and tropical rainfall around the winter solstice are conducted and their five-day averages over the model domain are analyzed. In the presence of radiative effects of ice clouds, doubled carbon dioxide changes pre-summer rainfall from the decrease associated with the enhanced atmospheric cooling to the increase associated with the enhanced infrared cooling as a result of the exclusion of radiative effects of water clouds. Doubled carbon dioxide leads to the reduction in tropical rainfall, caused by the removal of radiative effects of water clouds through the suppressed infrared cooling. In the absence of radiative effects of ice clouds, doubled carbon dioxide changes pre-summer rainfall from the increase associated with the strengthened atmospheric warming to the decrease associated with the weakened release of latent heat caused by the elimination of radiative effects of water clouds. The exclusion of radiative effects of water clouds increases tropical rainfall through the strengthened infrared cooling, which is insensitive to the change in carbon dioxide.

  14. Investigation of the adsorption of water vapor and carbon dioxide by KA zeolite

    SciTech Connect

    Khanitonov, V.P.; Shtein, A.S.

    1984-05-01

    According to the present data, KA zeolite, which can adsorb only water vapor, helium, and hydrogen, has the greatest selectivity in drying. The feasibility of using this zeolite in devices for selective drying of gases used in gas-analysis systems was studied. The results of the experiments were approximated by the thermal equation of the theory of bulk filling of micropores. The limiting value of the adsorption depends on the temperature, and it can be calculated according to the density of the adsorbed phase and the adsorption volume. The critical diameters of the water and carbon dioxide molecules are close to the dimensions of the KA-zeolite pores, something that determines the activated nature of the adsorption of these substances. Experiments on coadsorption of water vapor and carbon dioxide by a fixed bed of KA-zeolite under dynamic conditions showed that the adsorption of these substances has a frontal nature. The time of the protective action of the layer of zeolite during adsorption af water vapor exceeded by more than an order the time of the protective action during adsorption of carbon dioxide. The results showed that this adsorbent can be used for selective drying of gas mixtures containing carbon dioxide in batch-operation devices. Beforehand, the adsorbent should be regenerated with respect to moisture, and then it should be saturated with carbon dioxide by blowing the adsorbent with a gas mixture of the working composition until the equilibrium state is reached.

  15. Effect of water treatment chemicals on limestone/sulfur dioxide reaction in flue gas desulfurization systems

    SciTech Connect

    Dille, E.R.; Gaikwad, R.P.

    1994-12-31

    A simple laboratory test has been developed which simulates the reaction between limestone/water and sulfur dioxide in flue gas desulfurization systems. By adding various chemicals, in differing concentrations, to the limestone/water mixture, the quantitative impact on the sulfur dioxide/limestone reaction can be qualified and quantified. This paper will present the impact of several water treatment chemicals on the reaction of limestone and sulfur dioxide. An attempt has been made to predict the effect through mathematical correlations. All of the additive chemicals tend to decrease the rate of dissolution of limestone to various degrees. Some of the chemicals retard crystal growth thus adversely impacting solids separation in the thickener. The physical appearance of the crystal growth retarded limestone absorber slurry approaches a colloidal suspension.

  16. Designer organisms for photosynthetic production of ethanol from carbon dioxide and water

    DOEpatents

    Lee, James Weifu

    2011-07-05

    The present invention provides a revolutionary photosynthetic ethanol production technology based on designer transgenic plants, algae, or plant cells. The designer plants, designer algae, and designer plant cells are created such that the endogenous photosynthesis regulation mechanism is tamed, and the reducing power (NADPH) and energy (ATP) acquired from the photosynthetic water splitting and proton gradient-coupled electron transport process are used for immediate synthesis of ethanol (CH.sub.3CH.sub.2OH) directly from carbon dioxide (CO.sub.2) and water (H.sub.2O). The ethanol production methods of the present invention completely eliminate the problem of recalcitrant lignocellulosics by bypassing the bottleneck problem of the biomass technology. The photosynthetic ethanol-production technology of the present invention is expected to have a much higher solar-to-ethanol energy-conversion efficiency than the current technology and could also help protect the Earth's environment from the dangerous accumulation of CO.sub.2 in the atmosphere.

  17. Determination of Chlorine Dioxide and Chlorite in Water Supply Systems by Verified Methods

    NASA Astrophysics Data System (ADS)

    Tkáčová, Jana; Božíková, Jarmila

    2014-07-01

    This work is dedicated to the development and optimization of appropriate analytical methods for the determination of chlorine dioxide and chlorite in drinking water in order to obtain accurate and correct results in the quality control of drinking water. The work deals with the development and optimization of a method for the determination of chlorine dioxide using chlorophenol red. Furthermore, a new spectrophotometric method for the determination of chlorite via bromometry using methyl orange was developed, optimized and validated. An electrochemical method for the determination of chlorite by flow coulometry was also developed, optimized and validated.

  18. Geologic sequestration of carbon dioxide - an energy resource perspective

    SciTech Connect

    Robert C. Burruss; Sean T. Brennan

    2003-03-15

    Most energy used to meet human needs is derived from the combustion of fossil fuels (natural gas, oil, and coal), which releases carbon to the atmosphere, primarily as carbon dioxide (CO{sub 2}). The atmospheric concentration of CO{sub 2}, a greenhouse gas, is increasing, raising concerns that solar heat will be trapped and the average surficial temperature of the Earth will rise in response. Global warming studies predict that climate changes resulting from increases in atmospheric CO{sub 2} will adversely affect life on Earth. In the 200 years since the industrial revolution, the world's population has grown from about 800 million to over 6 billion people and the CO{sub 2} content of the atmosphere has risen from about 280 to about 360 parts per million by volume, a 30 percent increase. International concern about potential global climate change has spurred discussions about limiting the amount of CO{sub 2} and other greenhouse gases released to the atmosphere. 1 ref., 3 figs.

  19. Extraction of polychlorinated biphenyl with supercritical carbon dioxide, sulfur hexafluoride and subcritical water.

    PubMed

    Pross, S; Gau, W; Wenclawiak, B W

    2000-05-01

    In the extraction of spiked PCB from soil, three extracting fluids were investigated: supercritical carbon dioxide (CO2), supercritical sulfur hexafluoride (SF6) and subcritical water. Among the tested fluids SF6 appeared to be appropriate especially for the extraction of low polar PCB. CO2 and water were found to be suitable for the quantitative extraction of all PCB. Water was judged as the best because of its low price, good availability and environmental safety. PMID:11227442

  20. Facilitating Conceptual Understanding of Gas-Liquid Mass Transfer Coefficient through a Simple Experiment Involving Dissolution of Carbon Dioxide in Water in a Surface Aeration Reactor

    ERIC Educational Resources Information Center

    Utgikar, Vivek P.; MacPherson, David

    2016-01-01

    Students in the undergraduate "transport phenomena" courses typically have a greater difficulty in understanding the theoretical concepts underlying the mass transport phenomena as compared to the concepts of momentum and energy transport. An experiment based on dissolution of carbon dioxide in water was added to the course syllabus to…

  1. The Role of Water and Carbon Dioxide Intercalation on Na-Montmorillonite Swelling Behavior at Geological Carbon Sequestration Conditions

    NASA Astrophysics Data System (ADS)

    Makaremi, Meysam; Jordan, Kenneth; Guthrie, George; Myshakin, Evgeniy

    2015-03-01

    Swelling of Na-montmorillonite in the environment relevant to geological CO2 sequestration in deep underground formations is investigated by conducting classical Monte Carlo and molecular dynamics simulations. Both the binary (clay-water or clay- CO2) and the ternary (clay-water- CO2) systems containing the clay, water and carbon dioxide phases are simulated, and the free energy for clay swelling is calculated as a function of the interlayer distance. The calculations indicate that while water intercalates into the clay layer and forms stable monolayer and bilayer hydration states, in the absence of interlayer water adsorption of dry carbon dioxide is thermodynamically unfavorable. In the ternary system, two hydration states are observed with interlayer spacings corresponding closely to those of the pure water binary system. In addition, the simulations of the ternary system show that the incomplete first hydration state is more effective at adsorbing CO2 molecules than is the incomplete second hydration state. Work was performed in support of the NETL's ongoing research in Subtask 4000.4.641.061.002.254 under the RES Contract DE-FE0004000.

  2. Adsorption and Desorption of Carbon Dioxide and Water Mixtures on Synthetic Hydrophobic Carbonaceous Adsorbents

    NASA Technical Reports Server (NTRS)

    Finn, John E.; Harper, Lynn D. (Technical Monitor)

    1994-01-01

    Several synthetic carbonaceous adsorbents produced through pyrolysis of polymeric materials are available commercially. Some appear to have advantages over activated carbon for certain adsorption applications. In particular, they can have tailored hydrophobicities that are significantly greater than that of activated carbon, while moderately high surfaces areas are retained. These sorbents are being investigated for possible use in removing trace contaminants and excess carbon dioxide from air in closed habitats, plant growth chambers, and other applications involving purification of humid gas streams. We have analyzed the characteristics of a few of these adsorbents through adsorption and desorption experiments and standard characterization techniques. This paper presents pure and multicomponent adsorption data collected for carbon dioxide and water on two synthetic carbonaceous adsorbents having different hydrophobicities and capillary condensation characteristics. The observations are interpreted through consideration of the pore structure and surface chemistry of the solids and interactions between adsorbed carbon dioxide, water, and the solvent gas.

  3. Diurnal changes in the partial pressure of carbon dioxide in coral reef waters

    SciTech Connect

    Kayanne, Hajime; Suzuki, Atsushi; Saito, Hiroshi

    1995-07-14

    Coral reefs are considered to be a source of atmospheric carbon dioxide because of their high calcium carbonate production and low net primary production. This was tested by direct measurement of diurnal changes in the partial pressure of carbon dioxide (P{sub CO2}) in reef waters during two 3-day periods, one in March 1993 and one in March 1994, on Shiraho reef of the Ryukyu Islands, Japan. Although the P{sub CO2} values in reef waters exhibited large diurnal changes ranging from 160 to 520 microatmospheres, they indicate that the reef flat area is a net sink for atmospheric carbon dioxide. This suggests that the net organic production rate of the reef community exceeded its calcium carbonate production rate during the observation periods. 16 refs., 2 figs., 1 tab.

  4. Sunlight + Water = Tomorrow's Energy

    SciTech Connect

    Jones, Anne Katherine

    2013-07-18

    Representing the Center for Bio-Inspired Solar Fuel Production (BISfuel), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of BISfuel is to construct a complete system for solar-powered production of hydrogen fuel via water splitting; design principles are drawn from the fundamental concepts that underlie photosynthetic energy conversion.

  5. Canopy-scale kinetic fractionation of atmospheric carbon dioxide and water vapour isotopes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The isotopic fluxes of carbon dioxide (CO2) and water vapour (H2O) between the atmosphere and terrestrial plants provide powerful constraints on carbon sequestration on land 1-2, changes in vegetation cover 3 and the Earth’s Dole effect 4. Past studies, relying mainly on leaf-scale observations, hav...

  6. USING REDUCING AGENTS TO ELIMINATE CHLORINE DIOXIDE AND CHLORITE ION RESIDUALS IN DRINKING WATER

    EPA Science Inventory

    In an effort to determine the viability of various disinfection alternatives, the Evansville, Ind. Water and Sewer Utility is engaged in a pilot-plant investigation to compare chlorine dioxide and ozone pretreatment. As a result of increased speculation that the total residual c...

  7. Long-term carbon dioxide and water flux database, Walnut Gulch Experimental Watershed, Arizona, USA 1850

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We present the carbon dioxide and water flux data along with associated meteorological data collected by USDA Agricultural Research Service, Southwest Watershed Research Center, on the Walnut Gulch Experimental Watershed (WGEW) from 1997 through 2006. Measurements were collected from a shrub and gr...

  8. OXYGEN ISOTOPES IN ATMOSPHERIC SULFATES, SULFUR DIOXIDE, AND WATER VAPORS FIELD MEASUREMENTS, JULY 1975

    EPA Science Inventory

    Oxygen isotope ratios were determined for atmospheric samples of sulfate aerosols, sulfur dioxide, and water vapor collected simultaneously during a six-day period in July, 1975, at St. Louis, MO; Auburn, IL; and Glasgow, IL. The collection sites were located about 100km apart. C...

  9. The use of chlorine dioxide for the inactivation of copepod zooplankton in drinking water treatment.

    PubMed

    Lin, Tao; Chen, Wei; Cai, Bo

    2014-01-01

    The presence of zooplankton in drinking water treatment system may cause a negative effect on the aesthetic value of drinking water and may also increase the threat to human health due to they being the carriers of bacteria. Very little research has been done on the effects of copepod inactivation and the mechanisms involved in this process. In a series of bench-scale experiments we used a response surface method to assess the sensitivity of copepod to inactivation when chlorine dioxide (ClO₂) was used as a disinfectant. We also assessed the effects of the ClO₂dosage, exposure time, organic matter concentration and temperature. Results indicated that the inactivation rate improved with increasing dosage, exposure time and temperature, whereas it decreased with increasing organic matter concentration. Copepod inactivation was more sensitive to the ClO₂dose than that to the exposure time, while being maintained at the same Ct-value conditions. The activation energy at different temperatures revealed that the inactivation of copepods with ClO₂was temperature-dependent. The presence of organic matter resulted in a lower available dose as well as a shorter available exposure time, which resulted in a decrease in inactivation efficiency. PMID:25176489

  10. Transporting carbon dioxide recovered from fossil-energy cycles

    SciTech Connect

    Doctor, R. D.; Molburg, J. C.; Brockmeier, J. F.

    2000-07-24

    Transportation of carbon dioxide (CO{sub 2}) for enhanced oil recovery is a mature technology, with operating experience dating from the mid-1980s. Because of this maturity, recent sequestration studies for the US Department of Energy's National Energy Technology Laboratory have been able to incorporate transportation into overall energy-cycle economics with reasonable certainty. For these studies, two different coal-fueled plants are considered; the first collects CO{sub 2} from a 456-MW integrated coal gasification combined-cycle plant, while the second employs a 353-MW pulverized-coal boiler plant retrofitted for flue-gas recycling (Doctor et al. 1999; MacDonald and Palkes 1999). The pulverized-coal plant fires a mixture of coal in a 33% O{sub 2} atmosphere, the bulk of the inert gas being made up to CO{sub 2} to the greatest extent practical. If one power plant with one pipe feeds one sequestration reservoir, projected costs for a 500-km delivery pipeline are problematic, because when supplying one reservoir both plant availability issues and useful pipeline life heavily influence capital recovery costs. The transportation system proposed here refines the sequestration scheme into a network of three distinctive pipelines: (1) 80-km collection pipelines for a 330-MW pulverized-coal power plant with 100% CO{sub 2} recovery; (2) a main CO{sub 2} transportation trunk of 320 km that aggregates the CO{sub 2} from four such plants; and (3) an 80-km distribution network. A 25-year life is assumed for the first two segments, but only half that for the distribution to the reservoir. Projected costs for a 500-km delivery pipeline, assuming an infrastructure, are $7.82/tonne ($17.22/10{sup 3} Nm{sub 3} CO{sub 2} or $0.49/10{sup 3} scf CO{sub 2}), a savings of nearly 60% with respect to base-case estimates with no infrastructure. These costs are consistent only with conditioned CO{sub 2} having low oxygen and sulfur content; they do not include CO{sub 2} recovery, drying

  11. Measurement of Trace Water Vapor in a Carbon Dioxide Removal Assembly Product Stream

    NASA Technical Reports Server (NTRS)

    Wormhoudt, Joda; Shorter, Joanne H.; McManus, J. Barry; Nelson, David D.; Zahniser, Mark S.; Freedman, Andrew; Campbell, Melissa; Chang, Clarence T.; Smith, Frederick D.

    2004-01-01

    The International Space Station Carbon Dioxide Removal Assembly (CDRA) uses regenerable adsorption technology to remove carbon dioxide (COP) from cabin air. Product water vapor measurements from a CDRA test bed at the NASA Marshall Space Flight Center were made using a tunable infrared diode laser differential absorption spectrometer (TILDAS) provided by NASA Glenn Research Center. The TILDAS instrument exceeded all the test specifications, including sensitivity, dynamic range, time response, and unattended operation. During the COP desorption phase, water vapor concentrations as low as 5 ppmv were observed near the peak of CO2 evolution, rising to levels of approx. 40 ppmv at the end of a cycle. Periods of high water concentration (>100 ppmv) were detected and shown to be caused by an experimental artifact. Measured values of total water vapor evolved during a single desorption cycle were as low as 1 mg.

  12. Permeability of methane, carbon dioxide and water in PA11 and PVDF used for flexible pipes

    SciTech Connect

    Andersen, T.R.; Skar, J.I.; Hansteen, C.

    1999-11-01

    Permeability of methane, carbon dioxide and water in plasticized polyvinylidene fluoride (PVDF) and plasticized polyarnid 11 (PA11 ) has been measured for a number of temperatures and pressures in a small scale test apparatus and permeability coefficients have been calculated. The results have been used to predict if the annulus of flexible pipes will be water wet. For verification of the small scale test, a large scale test has also been carried out in a 50 mm flexible pipe. Both test methods show that the annulus of flexible pipes will be water wet when carrying gas and water. This implies that the conditions in the annulus will be corrosive when pipes are carrying gas which contains carbon dioxide or hydrogen sulfide. The corrosive conditions and corrosion fatigue must be taken into account when the fatigue life of flexible risers is calculated.

  13. Regional Carbon Dioxide and Water Vapor Exchange Over Heterogeneous Terrain

    NASA Technical Reports Server (NTRS)

    Mahrt, Larry J.

    2005-01-01

    In spite of setbacks due to forest fires, eviction after a change of landowners and unanticipated need to upgrade and replace much of the instrumentation, substantial progress has been made during the past three years, resulting in major new findings. Although most of the results are in manuscript form, three papers have been published and a fourth was recently submitted. The data has been subjected to extensive quality control. Extra attention has been devoted to the influence of tilt rotation and flux-calculation method, particularly with respect to nocturnal fluxes. Previous/standard methods for calculating nocturnal fluxes with moderate and strong stability are inadequate and lead to large random fluxes errors for individual records, due partly to inadvertent inclusion of mesoscale motions that strongly contaminant the estimation of fluxes by weak turbulence. Such large errors are serious for process studies requiring carbon dioxide fluxes for individual records, but are substantially reduced when averaging fluxes over longer periods as in calculation of annual NEE budgets. We have employed a superior method for estimating fluxes in stable conditions with a variable averaging width . Mesoscale fluxes are generally unimportant except for events and are generally not systematic or predictable. Mesoscale or regional models of our region are not able to reproduce important aspects of the diurnally varying wind field

  14. Combining geothermal energy capture with geologic carbon dioxide sequestration

    NASA Astrophysics Data System (ADS)

    Randolph, Jimmy B.; Saar, Martin O.

    2011-05-01

    Geothermal energy offers clean, renewable, reliable electric power with no need for grid-scale energy storage, yet its use has been constrained to the few locations worldwide with naturally high geothermal heat resources and groundwater availability. We present a novel approach with the potential to permit expansion of geothermal energy utilization: heat extraction from naturally porous, permeable formations with CO2 as the injected subsurface working fluid. Fluid-mechanical simulations reveal that the significantly higher mobility of CO2, compared to water, at the temperature/pressure conditions of interest makes CO2 an attractive heat exchange fluid. We show numerically that, compared to conventional water-based and engineered geothermal systems, the proposed approach provides up to factors of 2.9 and 5.0, respectively, higher geothermal heat energy extraction rates. Consequently, more regions worldwide could be economically used for geothermal electricity production. Furthermore, as the injected CO2 is eventually geologically sequestered, such power plants would have negative carbon footprints.

  15. Techniques for the conversion to carbon dioxide of oxygen from dissolved sulfate in thermal waters

    USGS Publications Warehouse

    Nehring, N.L.; Bowen, P.A.; Truesdell, A.H.

    1977-01-01

    The fractionation of oxygen isotopes between dissolved sulfate ions and water provides a useful geothermometer for geothermal waters. The oxygen isotope composition of dissolved sulfate may also be used to indicate the source of the sulfate and processes of formation. The methods described here for separation, purification and reduction of sulfate to prepare carbon dioxide for mass spectrometric analysis are modifications of methods by Rafter (1967), Mizutani (1971), Sakai and Krouse (1971), and Mizutani and Rafter (1969). ?? 1976.

  16. Automatic Carbon Dioxide-Methane Gas Sensor Based on the Solubility of Gases in Water

    PubMed Central

    Cadena-Pereda, Raúl O.; Rivera-Muñoz, Eric M.; Herrera-Ruiz, Gilberto; Gomez-Melendez, Domingo J.; Anaya-Rivera, Ely K.

    2012-01-01

    Biogas methane content is a relevant variable in anaerobic digestion processing where knowledge of process kinetics or an early indicator of digester failure is needed. The contribution of this work is the development of a novel, simple and low cost automatic carbon dioxide-methane gas sensor based on the solubility of gases in water as the precursor of a sensor for biogas quality monitoring. The device described in this work was used for determining the composition of binary mixtures, such as carbon dioxide-methane, in the range of 0–100%. The design and implementation of a digital signal processor and control system into a low-cost Field Programmable Gate Array (FPGA) platform has permitted the successful application of data acquisition, data distribution and digital data processing, making the construction of a standalone carbon dioxide-methane gas sensor possible. PMID:23112626

  17. Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries

    SciTech Connect

    Price, Lynn; Worrell, Ernst; Phylipsen, Dian

    1999-09-01

    The industrial sector is the most important end-use sector in developing countries in terms of energy use and was responsible for 50% of primary energy use and 53% of associated carbon dioxide emissions in 1995 (Price et al., 1999). The industrial sector is extremely diverse, encompassing the extraction of natural resources, conversion of these resources into raw materials, and manufacture of finished products. Five energy-intensive industrial subsectors account for the bulk of industrial energy use and related carbon dioxide emissions: iron and steel, chemicals, petroleum refining, pulp and paper, and cement. In this paper, we focus on the steel and cement sectors in Brazil, China, India, and Mexico.1 We review historical trends, noting that China became the world's largest producer of cement in 1985 and of steel in 1996. We discuss trends that influence energy consumption, such as the amount of additives in cement (illustrated through the clinker/cement ratio), the share of electric arc furnaces, and the level of adoption of continuous casting. To gauge the potential for improvement in production of steel and cement in these countries, we calculate a ''best practice'' intensity based on use of international best practice technology to produce the mix of products manufactured in each country in 1995. We show that Brazil has the lowest potential for improvement in both sectors. In contrast, there is significant potential for improvement in Mexico, India, and especially China, where adoption of best practice technologies could reduce energy use and carbon dioxide emissions from steel production by 50% and cement production by 37%. We conclude by comparing the identified potential for energy efficiency improvement and carbon dioxide emissions reduction in these key developing countries to that of the U.S. This comparison raises interesting questions related to efforts to improve energy efficiency in developing countries, such as: what is the appropriate role of

  18. The impact of future carbon dioxide emission reduction targets on U.S. electric sector water use

    NASA Astrophysics Data System (ADS)

    Cameron, Colin MacKay

    The U.S. electric sector's reliance on water makes it vulnerable to the impacts of climate change on water resources. Here we analyze how constraints on U.S. energy system carbon dioxide (CO2) emissions could affect water withdrawal and consumption in the U.S. electric sector through 2055. We use simulations of the EPA's U.S. 9-region (EPAUS9r) MARKAL least-cost optimization energy systems model with updated water use factors for electricity generating technologies. Model results suggest CO2 constraints could force the retirement of old power plants and drive increased use of low water-use renewable and nuclear power as well as natural gas CCS plants with more advanced cooling systems. These changes in electric sector technology mix reduce water withdrawal in all scenarios but increase water consumption in aggressive scenarios. Decreased electric sector water withdrawal would likely reduce electric sector vulnerability to climate change, but the rise in consumption could increase competition with other users.

  19. Ground water and energy

    SciTech Connect

    Not Available

    1980-05-01

    In view of complex environmental/energy decisions, the Environmental Impacts Division of the Office of Technology Impacts develops analytical methods for conducting policy analyses supporting decision making. The methods development process often begins with a workshop of leading experts and specialists in the relevant disciplines and issue areas; workshop findings are subsequently utilized by OTI to form a more solid foundation for viable policies. The National Workshop on Ground Water and Energy Production was envisioned as a tool through which OTI could obtain insights, information, and methods (on environmental, economical, physical, political, legal, and social issues) to use in its analyses, models, and assessments. To accomplish this, the Workshop comprised both plenary sessions and individual working groups. The former provided opportunities for all participants to explore issues from a broad perspective, whereas the latter enabled participants to focus on the three following areas: ground water supply; conflicts and barriers to its use; and alternatives or solutions to the various issues. This report summarizes information and insights gained by the Office of Technology Impacts during the course of the Workshop. The Key Findings section summarizes the most important facts discovered during the Workshop. The three general topics that follow (Supply, Conflicts and Barriers, and Alternatives) are those described in the Core Issues statements. The statements are reflective of the recommendations and analyses prepared by the several working groups.

  20. Wind/water energy converter

    NASA Technical Reports Server (NTRS)

    Paulkovich, J.

    1979-01-01

    Device will convert wind, water, tidal or wave energy into electrical or mechanical energy. Is comprised of windmill-like paddles or blades synchronously geared to orient themselves to wind direction for optimum energy extraction.

  1. Hydrogenation of Carbon Dioxide by Water: Alkali-Promoted Synthesis of Formate

    SciTech Connect

    Hrbek, J.; Hoffmann, F.M.; Yang, Y.; Paul, J.; White, M.G.

    2010-07-15

    Conversion of carbon dioxide utilizing protons from water decomposition is likely to provide a sustainable source of fuels and chemicals in the future. We present here a time-evolved infrared reflection absorption spectroscopy (IRAS) and temperature-programmed desorption (TPD) study of the reaction of CO{sub 2} + H{sub 2}O in thin potassium layers. Reaction at temperatures below 200 K results in the hydrogenation of carbon dioxide to potassium formate. Thermal stability of the formate, together with its sequential transformation to oxalate and to carbonate, is monitored and discussed. The data of this model study suggest a dual promoter mechanism of the potassium: the activation of CO{sub 2} and the dissociation of water. Reaction at temperatures above 200 K, in contrast, is characterized by the absence of formate and the direct reaction of CO{sub 2} to oxalate, due to a drastic reduction of the sticking coefficient of water at higher temperatures.

  2. Advances in Raman Lidar Measurements of Water Vapor, Cirrus Clouds and Carbon Dioxide

    NASA Technical Reports Server (NTRS)

    Whiteman, David N.; Potter, John R.; Tola, Rebecca; Rush, Kurt; Veselovskii, Igor; Cadirola, Martin; Comer, Joseph

    2006-01-01

    Narrow-band interference filters with improved transmission in the ultraviolet have been developed under NASA-funded research and used in the Raman Airborne Spectroscopic Lidar (RASL) in ground- based, upward-looking tests. RASL is an airborne Raman Lidar system designed to measure water vapor mixing ratio, and aerosol backscatter/extinction/depolarization. It also possesses the capability to make experimental measurements of cloud liquid water and carbon dioxide. It is being prepared for first flight tests during the summer of 2006. With the newly developed filters installed in RASL, measurements were made of atmospheric water vapor, cirrus cloud optical properties and carbon dioxide that improve upon any previously demonstrated using Raman lidar. Daytime boundary layer profiling of water vapor mixing ratio is performed with less than 5% random error using temporal and spatial resolution of 2-minutes and 60 - 210, respectively. Daytime cirrus cloud optical depth and extinction- to-backscatter ratio measurements are made using 1-minute average. Sufficient signal strength is demonstrated to permit the simultaneous profiling of carbon dioxide and water vapor mixing ratio into the free troposphere during the nighttime. Downward-looking from an airborne RASL should possess the same measurement statistics with approximately a factor of 5 - 10 decrease in averaging time. A description of the technology improvements are provided followed by examples of the improved Raman lidar measurements.

  3. Chemical vapour deposition of thermochromic vanadium dioxide thin films for energy efficient glazing

    SciTech Connect

    Warwick, Michael E.A.; Binions, Russell

    2014-06-01

    Vanadium dioxide is a thermochromic material that undergoes a semiconductor to metal transitions at a critical temperature of 68 °C. This phase change from a low temperature monoclinic structure to a higher temperature rutile structure is accompanied by a marked change in infrared reflectivity and change in resistivity. This ability to have a temperature-modulated film that can limit solar heat gain makes vanadium dioxide an ideal candidate for thermochromic energy efficient glazing. In this review we detail the current challenges to such glazing becoming a commercial reality and describe the key chemical vapour deposition technologies being employed in the latest research. - Graphical abstract: Schematic demonstration of the effect of thermochromic glazing on solar radiation (red arrow represents IR radiation, black arrow represents all other solar radiation). - Highlights: • Vanadium dioxide thin films for energy efficient glazing. • Reviews chemical vapour deposition techniques. • Latest results for thin film deposition for vanadium dioxide.

  4. Thermochemical cyclic system for splitting water and/or carbon dioxide by means of cerium compounds and reactions useful therein

    DOEpatents

    Bamberger, C.E.; Robinson, P.R.

    A thermochemical cyclic process for producing hydrogen from water comprises reacting ceric oxide with monobasic or dibasic alkali metal phosphate to yield a solid reaction product, oxygen and water. The solid reaction product, alkali metal carbonate or bicarbonate, and water, are reacted to yield hydrogen, ceric oxide, carbon dioxide and trialkali metal phosphate. Ceric oxide is recycled. Trialkali metal phosphate, carbon dioxide and water are reacted to yield monobasic or dibasic alkali metal phosphate and alkali metal bicarbonate, which are recycled. The cyclic process can be modified for producing carbon monoxide from carbon dioxide by reacting the alkali metal cerous phosphate and alkali metal carbonate or bicarbonate in the absence of water to produce carbon monoxide, ceric oxide, carbon dioxide and trialkali metal phosphate. Carbon monoxide can be converted to hydrogen by the water gas shift reaction.

  5. Thermochemical cyclic system for splitting water and/or carbon dioxide by means of cerium compounds and reactions useful therein

    DOEpatents

    Bamberger, Carlos E.; Robinson, Paul R.

    1980-01-01

    A thermochemical cyclic process for producing hydrogen from water comprises reacting ceric oxide with monobasic or dibasic alkali metal phosphate to yield a solid reaction product, oxygen and water. The solid reaction product, alkali metal carbonate or bicarbonate, and water, are reacted to yield hydrogen, ceric oxide, carbon dioxide and trialkali metal phosphate. Ceric oxide is recycled. Trialkali metal phosphate, carbon dioxide and water are reacted to yield monobasic or dibasic alkali metal phosphate and alkali metal bicarbonate, which are recycled. The cylic process can be modified for producing carbon monoxide from carbon dioxide by reacting the alkali metal cerous phosphate and alkali metal carbonate or bicarbonate in the absence of water to produce carbon monoxide, ceric oxide, carbon dioxide and trialkali metal phosphate. Carbon monoxide can be converted to hydrogen by the water gas shift reaction.

  6. CALCIUM OXIDE SINTERING IN ATMOSPHERES CONTAINING WATER AND CARBON DIOXIDE

    EPA Science Inventory

    The paper gives results of measurements of the effects of water vapor and CO2 on the sintering rate of nascent CaO, as a function of partial pressure and temperature using CaO prepared by rapid decomposition of CaCO3 and CA(OH)2. Each gas strongly catalyzed the sintering process ...

  7. Susceptibility of the brine shrimp Artemia and its pathogen Vibrio parahaemolyticus to chlorine dioxide in contaminated sea-water.

    PubMed

    Puente, M E; Vega-Villasante, F; Holguin, G; Bashan, Y

    1992-12-01

    Adults and nauplii of the brine shrimp, Artemia, together with Vibrio parahaemolyticus, were placed in sewage-contaminated sea-water which had been treated with chlorine dioxide (Hallox E-100TM) to test its potential as a disinfectant for salt water aquaculture. The nauplii were very susceptible to low concentrations of chlorine dioxide (47 micrograms/l Cl-), but the adults were slightly more resistant. Sterile sea-water treated with lower concentrations of chlorine dioxide (less than 47 micrograms/l Cl-) had no effect on the shrimp, but inhibited the growth of V. parahaemolyticus. In sewage-contaminated sea-water, chlorine dioxide levels of 285-2850 micrograms/l, necessary for the inactivation of V. parahaemolyticus and any native bacteria, destroyed the Artemia culture. Hallox E-100TM persisted in sea-water for 18 h, but later decayed. We conclude that: (i) Artemia nauplii are a sensitive and convenient test-organism to determine low concentrations of chlorine dioxide in sea-water; (ii) chlorine dioxide is efficient for controlling V. parahaemolyticus in sea-water; and (iii) chlorine dioxide should be further evaluated as a potential disinfectant for aquaculture, but, for higher organisms than Artemia. PMID:1490907

  8. Separations Technology for Clean Water and Energy

    SciTech Connect

    Jarvinen, Gordon D

    2012-06-22

    Providing clean water and energy for about nine billion people on the earth by midcentury is a daunting challenge. Major investments in efficiency of energy and water use and deployment of all economical energy sources will be needed. Separations technology has an important role to play in producing both clean energy and water. Some examples are carbon dioxide capture and sequestration from fossil energy power plants and advanced nuclear fuel cycle scemes. Membrane separations systems are under development to improve the economics of carbon capture that would be required at a huge scale. For nuclear fuel cycles, only the PUREX liquid-liquid extraction process has been deployed on a large scale to recover uranium and plutonium from used fuel. Most current R and D on separations technology for used nuclear fuel focuses on ehhancements to a PUREX-type plant to recover the minor actinides (neptunium, americiu, and curium) and more efficiently disposition the fission products. Are there more efficient routes to recycle the actinides on the horizon? Some new approaches and barriers to development will be briefly reviewed.

  9. Water versus Energy in China

    NASA Astrophysics Data System (ADS)

    Li, W.; Qiu, G.; Li, L.

    2013-12-01

    Water is needed to generate energy. On the other hand, energy is required to deliver, clean, and evaporate water. Thus, there are extensive linkages between water and energy uses. Meanwhile, both resources may limit the other, especially in the context of urbanization and industrialization as well as climate change. Unfortunately, up to now, little attention has been paid to the tension between water and energy in academic institutions, governmental agencies, and industries. Since water and energy nexus is extremely important for human beings to adapt to the global warming, it is time for us to share some of our frontier ideas and results in this field. In this study, based on paper reviewing and extensive investigation, we explore the nexus between the water and energy in China, mainly focused on: 1) water resource development and its energy consumption; 2) water and energy nexus in agriculture; 3) water and energy nexus in industries; and 4) energy consumption by evapotranspiration and its effect on reducing urban temperature. By this study, new data and results are obtained, which would be useful for better understanding and management of water and energy for adaptation to climate change.

  10. Retrieval of water cloud properties from carbon dioxide lidar soundings.

    PubMed

    Piatt, C M; Takashima, T

    1987-04-01

    Lidar backscatter signatures from model water clouds are calculated for CO(2) lidar wavelengths (9.2-10.8 microm) using Mie theory. The lidar isotropic mass backscatter coefficient is found to be quite variable both with cloud model and with wavelength, with values ranging from ~90 to 15 g(-1) cm(2) at 9.2-microm wavelength and from 25 to 5 g(-1) cm(2) at 11 microm, there being a general decrease in values with increasing wavelength. The cloud isotropic backscatter-to-extinction ratio similarly varies with both wavelength and cloud model between extreme values of 0.14 and 0.008. It is found that the cloud mass extinction coefficient has a value at any wavelength which is independent of cloud model droplet size distribution to within ~10% accuracy, in agreement with other studies. The value of this quantity varies from 1929 g(-1) cm(2) at 9.2 microm to 1258 g(-1) cm(2) at 11.0 microm. If the isotropic volume backscatter coefficient and the isotropic backscatter-to-extinction ratio are measured by lidar, then using the above characteristics of mass extinction coefficient the cloud liquid water content can be measured at any wavelength to an accuracy of ~20% when the cloud optical depth is between 0 and 0.5, with an increasing error with increasing cloud optical depth. Using the relationship between cloud droplet mode radius and backscatter-to-extinction ratio, the mode radius can be determined to ~10% accuracy. Multiple scattering in the backscattered beam for the case of absorbing water clouds at CO(2) wavelengths is also considered. The cloud depth to which accurate information can be retrieved in typical water clouds varies from ~80 to 250 m depending on the wavelength and the cloud model, although some information is available to depths of 500 m in some clouds. PMID:20454313

  11. Adsorption of carbon dioxide, methane, and their mixtures in porous carbons: effect of surface chemistry, water content, and pore disorder.

    PubMed

    Billemont, Pierre; Coasne, Benoit; De Weireld, Guy

    2013-03-12

    The adsorption of carbon dioxide, methane, and their mixtures in nanoporous carbons in the presence of water is studied using experiments and molecular simulations. Both the experimental and numerical samples contain polar groups that account for their partially hydrophilicity. For small amounts of adsorbed water, although the shape of the adsorption isotherms remain similar, both the molecular simulations and experiments show a slight decrease in the CO2 and CH4 adsorption amounts. For large amounts of adsorbed water, the experimental data suggest the formation of methane or carbon dioxide clathrates in agreement with previous work. In contrast, the molecular simulations do not account for the formation of such clathrates. Another important difference between the simulated and experimental data concerns the number of water molecules that desorb upon increasing the pressure of carbon dioxide and methane. Although the experimental data indicate that water remains adsorbed upon carbon dioxide and methane adsorption, the molecular simulations suggest that 40 to 75% of the initial amount of adsorbed water desorbs with carbon dioxide or methane pressure. Such discrepancies show that differences between the simulated and experimental samples are crucial to account for the rich phase behavior of confined water-gas systems. Our simulations for carbon dioxide-methane coadsorption in the presence of water suggest that the pore filling is not affected by the presence of water and that adsorbed solution theory can be applied for pressures as high as 15 MPa. PMID:23346958

  12. Variations in mid tropospheric carbon dioxide, temperature and water vapour using satellite data during 2003-2011

    NASA Astrophysics Data System (ADS)

    Dhaka, Surendra

    2016-07-01

    In this presentation global, hemispherical and regional (India) variations in carbon dioxide, temperature and water vapour and their association is analysed using mid-tropospheric (300-500 hPa) Atmospheric Infra-red Sounder (AIRS) data for a period of 9 years (2003-2011). Mid-tropospheric carbon dioxide is observed to rise from ~372.61 ppm to ~392.94 ppm over the globe and 373.38 ppm to 392.48 ppm over India from 2003 to 2011. However no significant changes are observed in mid-tropospheric temperature and water vapour variations for the same period. De-trended data of temperature and water vapour shows a high correlation between them, but no significant correlation was observed between temperature and carbon dioxide over the studied regions. The absence of immediate co-relation between temperature and carbon dioxide is the evidence that rise in carbon dioxide in the atmosphere will not imply more absorption over the earth surface. This may be explained because of the absorbing effect of carbon dioxide which is very small as compared to water vapour. The role of water vapour is reinforced because unlike carbon dioxide, water vapour in the atmosphere is changing in tune with temperature.

  13. Homogeneous water nucleation and droplet growth in methane and carbon dioxide mixtures at 235 K and 10 bar.

    PubMed

    Holten, V; van Dongen, M E H

    2010-05-28

    Homogeneous nucleation rates and droplet growth rates of water in pure methane and mixtures of methane and carbon dioxide were measured in an expansion wave tube at 235 K and 10 bar. The nucleation rate in pure methane is three orders of magnitude higher than literature nucleation rates of water in low-pressure helium or argon. Addition of carbon dioxide to the carrier gas mixture increases the rates even more. Specifically, rates in a mixture of methane and 3% carbon dioxide are a factor of 10 higher than the rates in pure methane. With 25% carbon dioxide, the rates are four orders of magnitude higher than the rates in pure methane. An application of the nucleation theorem shows that the critical cluster consists of 22 water molecules and 5 methane molecules, for nucleation in pure methane. Growth rates of water droplets were measured in methane and in methane-carbon dioxide mixtures at 243 K and 11.5 bar. At equal temperature, pressure and water vapor fraction, the growth rate of the squared droplet radius is about 20% lower in the mixture with 25% carbon dioxide than in pure methane. The lower growth rate is caused by a smaller diffusion coefficient of water in the mixture with carbon dioxide; the difference of the diffusion coefficients is qualitatively reproduced by the empirical Fuller correlation combined with Blanc's law. PMID:20515097

  14. Energy-Related Carbon Dioxide Emissions in U.S. Manufacturing

    EIA Publications

    2006-01-01

    Based on the Manufacturing Energy Consumption Survey (MECS) conducted by the U.S. Department of Energy, Energy Information Administration (EIA), this paper presents historical energy-related carbon dioxide emission estimates for energy-intensive sub-sectors and 23 industries. Estimates are based on surveys of more than 15,000 manufacturing plants in 1991, 1994, 1998, and 2002. EIA is currently developing its collection of manufacturing data for 2006.

  15. Amino Acid Synthesis in a Supercritical Carbon Dioxide - Water System

    PubMed Central

    Fujioka, Kouki; Futamura, Yasuhiro; Shiohara, Tomoo; Hoshino, Akiyoshi; Kanaya, Fumihide; Manome, Yoshinobu; Yamamoto, Kenji

    2009-01-01

    Mars is a CO2-abundant planet, whereas early Earth is thought to be also CO2-abundant. In addition, water was also discovered on Mars in 2008. From the facts and theory, we assumed that soda fountains were present on both planets, and this affected amino acid synthesis. Here, using a supercritical CO2/liquid H2O (10:1) system which mimicked crust soda fountains, we demonstrate production of amino acids from hydroxylamine (nitrogen source) and keto acids (oxylic acid sources). In this research, several amino acids were detected with an amino acid analyzer. Moreover, alanine polymers were detected with LC-MS. Our research lights up a new pathway in the study of life’s origin. PMID:19582225

  16. Solubility of carbon dioxide in methyldiethanolamine + methanol + water

    SciTech Connect

    Henni, A.; Mather, A.E.

    1995-03-01

    Aqueous solutions of methyldiethanolamine (MDEA) are attractive solvents for the selective removal of H{sub 2}S from process stream containing CO{sub 2} and hydrocarbons. The solubility of CO{sub 2} in a mixed nonaqueous solvent of methyldiethanolamine MDEA and methanol has been measured at 40 C. The results are compared with the solubility of CO{sub 2} in pure methanol. The solubility of CO{sub 2} has also been obtained at 40 and 100 C in an aqueous mixed solvent consisting of methanol (40 mass %), MDEA (40 mass %), and water (20 mass %) at partial pressures of the acid gas up to 7.04 MPa. The solubility results are compared with the nonaqueous mixed solvent results and previously reported data for aqueous methyldiethanolamine.

  17. Coupling carbon dioxide reduction with water oxidation in nanoscale photocatalytic assemblies.

    PubMed

    Kim, Wooyul; McClure, Beth Anne; Edri, Eran; Frei, Heinz

    2016-06-01

    The reduction of carbon dioxide by water with sunlight in an artificial system offers an opportunity for utilizing non-arable land for generating renewable transportation fuels to replace fossil resources. Because of the very large scale required for the impact on fuel consumption, the scalability of artificial photosystems is of key importance. Closing the photosynthetic cycle of carbon dioxide reduction and water oxidation on the nanoscale addresses major barriers for scalability as well as high efficiency, such as resistance losses inherent to ion transport over macroscale distances, loss of charge and other efficiency degrading processes, or excessive need for the balance of system components, to mention a few. For the conversion of carbon dioxide to six-electron or even more highly reduced liquid fuel products, introduction of a proton conducting, gas impermeable separation membrane is critical. This article reviews recent progress in the development of light absorber-catalyst assemblies for the reduction and oxidation half reactions with focus on well defined polynuclear structures, and on novel approaches for optimizing electron transfer among the molecular or nanoparticulate components. Studies by time-resolved optical and infrared spectroscopy for the understanding of charge transfer processes between the chromophore and the catalyst, and of the mechanism of water oxidation at metal oxide nanocatalysts through direct observation of surface reaction intermediates are discussed. All-inorganic polynuclear units for reducing carbon dioxide by water at the nanoscale are introduced, and progress towards core-shell nanotube assemblies for completing the photosynthetic cycle under membrane separation is described. PMID:27121982

  18. Carbon dioxide and the stomatal control of water balance and photosynthesis in higher plants

    SciTech Connect

    Taiz, L.; Zeiger, E.; Mawson, B. T.; Cornish, K.; Radin, J. W.; Turcotte, E. L.; Hercovitz, S.; Tallman, G.; Karlsson, P. E.; Bogomolni, R. A.; Talbott, L. D.; Srivastava, A.

    1992-01-01

    Research continued into the investigation of the effects of carbon dioxide on stomatal control of water balance and photosynthesis in higher plants. Topics discussed this period include a method of isolating a sufficient number of guard cell chloroplasts for biochemical studies by mechanical isolation of epidermal peels; the measurement of stomatal apertures with a digital image analysis system; development of a high performance liquid chromatography method for quantification of metabolites in guard cells; and genetic control of stomatal movements in Pima cotton. (CBS)

  19. Computing Carbon Dioxide and Water Vapor Fluxes Everywhere, All of the Time

    NASA Astrophysics Data System (ADS)

    Baldocchi, D. D.; Ryu, Y.; Kobayashi, H.

    2011-12-01

    We examine a hierarchy of biophysical models which aim to produce information on the 'breathing of the biosphere' that is 'everywhere, all of the time'. The computational demands of this problem are daunting because the science must transcend fourteen orders of magnitude in time and space as one evaluates a panoply of non-linear biophysical processes from the dimension of the chloroplast of leaves to the globe. At the canopy to landscape scales, one must simulate the micro-habitat conditions of thousands of leaves, as they are displayed on groups of plants with a variety of angle orientations. Then one must apply the micro-habitat information (e.g. sunlight, temperature, humidity, CO2 concentration) to sets of coupled non-linear equations that simulate photosynthesis, respiration and the energy balance of the leaves to add up this information. In sparse canopies three-dimensional radiative transfer models are needed. At the regional to global scales, it is pertinent to apply lessons learned at the canopy scale and drive a system of biophysical equations, called the Breathing-Earth Science Simulator (BESS), with multiple layers of remote sensing datasets at high resolution (1 km) and frequent intervals (daily) to predict carbon dioxide and water vapor exchange. And parameterize these models with emerging ecological rules that can be assessed with remote sensing. With BESS, the global data products of ecosystem photosynthesis and transpiration compare well with direct flux measurements, and produce complex spatial and temporal patterns that will prove to be valuable for environmental modelers and scientists studying climate change and carbon and water cycles from local to global scales.

  20. Mechanism Study of Carbon Dioxide Capture from Ambient Air by Hydration Energy Variation

    NASA Astrophysics Data System (ADS)

    Shi, X.; Lackner, K. S.

    2014-12-01

    Hydration of neutral and ionic species on solid interfaces plays an important role in a wide range of natural and engineered processes within energy systems as well as biological and environmental systems. Various chemical reactions are significantly enhanced, both in the rate and the extent of the reaction, because of water molecules present or absent at the interface. A novel technology for carbon dioxide capture, driven by the free energy difference between more or less hydrated states of an anionic exchange resin is studied for a new approach to absorb CO2 from ambient air. For these materials the affinity to CO2 is dramatically lowered as the availability of water is increased. This makes it possible to absorb CO2 from air in a dry environment and release it at two orders of magnitude larger partial pressures in a wet environment. While the absorption process and the thermodynamic properties of air capture via ion exchange resins have been demonstrated, the underlying physical mechanisms remain to be understood. In order to rationally design better sorbent materials, the present work elucidates through molecular dynamics and quantum mechanical modeling the energy changes in the carbonate, bicarbonate and hydroxide ions that are induced by hydration, and how these changes affect sorbent properties. A methodology is developed to determine the free energy change during carbonate ion hydrolysis changes with different numbers of water molecules present. This makes it possible to calculate the equilibrium in the reaction CO3--•nH2O ↔ HCO3- • m1H2O + OH- • m2H2O + (n - 1 - m1 - m2)H2O Molecular dynamics models are used to calculate free energies of hydration for the CO32- ion, the HCO3- ion, and the OH- ion as function of the amount of water that is present. A quantum mechanical model is employed to study the equilibrium of the reaction Na2CO3 + H2O ↔ NaHCO3 + NaOHin a vacuum and at room temperature. The computational analysis of the free energy of

  1. The effect of plutonium dioxide water surface coverage on the generation of hydrogen and oxygen

    SciTech Connect

    Veirs, Douglas K.; Berg, John M.; Crowder, Mark L.

    2012-06-20

    The conditions for the production of oxygen during radiolysis of water adsorbed onto plutonium dioxide powder are discussed. Studies in the literature investigating the radiolysis of water show that both oxygen and hydrogen can be generated from water adsorbed on high-purity plutonium dioxide powder. These studies indicate that there is a threshold in the amount of water below which oxygen is not generated. The threshold is associated with the number of monolayers of adsorbed water and is shown to occur at approximately two monolayers of molecularly adsorbed water. Material in equilibrium with 50% relative humidity (RH) will be at the threshold for oxygen generation. Using two monolayers of molecularly adsorbed water as the threshold for oxygen production, the total pressure under various conditions is calculated assuming stoichiometric production of hydrogen and oxygen. The specific surface area of the oxide has a strong effect on the final partial pressure. The specific surface areas resulting in the highest pressures within a 3013 container are evaluated. The potential for oxygen generation is mitigated by reduced relative humidity, and hence moisture adsorption, at the oxide surface which occurs if the oxide is warmer than the ambient air. The potential for oxygen generation approaches zero as the temperature difference between the ambient air and the material approaches 6 C.

  2. Comparison of commercial analytical techniques for measuring chlorine dioxide in urban desalinated drinking water.

    PubMed

    Ammar, T A; Abid, K Y; El-Bindary, A A; El-Sonbati, A Z

    2015-12-01

    Most drinking water industries are closely examining options to maintain a certain level of disinfectant residual through the entire distribution system. Chlorine dioxide is one of the promising disinfectants that is usually used as a secondary disinfectant, whereas the selection of the proper monitoring analytical technique to ensure disinfection and regulatory compliance has been debated within the industry. This research endeavored to objectively compare the performance of commercially available analytical techniques used for chlorine dioxide measurements (namely, chronoamperometry, DPD (N,N-diethyl-p-phenylenediamine), Lissamine Green B (LGB WET) and amperometric titration), to determine the superior technique. The commonly available commercial analytical techniques were evaluated over a wide range of chlorine dioxide concentrations. In reference to pre-defined criteria, the superior analytical technique was determined. To discern the effectiveness of such superior technique, various factors, such as sample temperature, high ionic strength, and other interferences that might influence the performance were examined. Among the four techniques, chronoamperometry technique indicates a significant level of accuracy and precision. Furthermore, the various influencing factors studied did not diminish the technique's performance where it was fairly adequate in all matrices. This study is a step towards proper disinfection monitoring and it confidently assists engineers with chlorine dioxide disinfection system planning and management. PMID:26608759

  3. Visible light-harvesting photoanodes for solar energy conversion: A comparison of anchoring groups to titanium dioxide

    NASA Astrophysics Data System (ADS)

    Martini, Lauren A.

    Environmental concerns related to climate change and geopolitical issues related to energy security have led to a widespread pursuit of alternative, non-fossil fuel energy sources capable of meeting our increasing global energy demands. Solar energy, which strikes the earth's surface at a rate vastly exceeding our current worldwide power demand, presents itself as a promising source of clean, abundant and renewable energy. The capture and conversion of solar energy into electricity as well as storable, transportable chemical fuels has therefore become major area of chemical research. Inspired by photosynthesis in nature, in which plants and algae convert sunlight, water, and carbon dioxide into oxygen and stored chemical fuel in the form of sugars, recent work has focused on visible light-driven water-splitting technologies for the production of solar fuels. Honda and Fujishima reported the first example of photoelectrochemical water oxidation in 1972. In their system, an inexpensive titanium dioxide semiconductor irradiated with ultraviolet light produced oxygen at the photoanode surface and hydrogen at the surface of a platinum counter electrode. In attempt to harness visible light instead, titanium dioxide and other inexpensive wide band gap photoanodes have been functionalized with visible light-absorbing molecular dyes. These dye-sensitized photoanodes have been used successfully to convert solar energy into electrical current, as in dye-sensitized solar cells, and to drive chemical processes like water oxidation, as in photocatalytic cells. In both systems, a long-lived charge separation is established upon illumination of the photoanode surface when a photoexcited molecular chromophore transfers an electron to the semiconductor conduction band. Following this electron injection process, a nearby redox-active species is oxidized and refills the hole left behind on the molecular chromophore. While the steps of this scheme are relatively straightforward, the

  4. Reducing the chlorine dioxide demand in final disinfection of drinking water treatment plants using activated carbon.

    PubMed

    Sorlini, Sabrina; Biasibetti, Michela; Collivignarelli, Maria Cristina; Crotti, Barbara Marianna

    2015-01-01

    Chlorine dioxide is one of the most widely employed chemicals in the disinfection process of a drinking water treatment plant (DWTP). The aim of this work was to evaluate the influence of the adsorption process with granular activated carbon (GAC) on the chlorine dioxide consumption in final oxidation/disinfection. A first series of tests was performed at the laboratory scale employing water samples collected at the outlet of the DWTP sand filter of Cremona (Italy). The adsorption process in batch conditions with seven different types of GAC was studied. A second series of tests was performed on water samples collected at the outlet of four GAC columns installed at the outlet of the DWTP sand filter. The results showed that the best chlorine dioxide demand (ClO2-D) reduction yields are equal to 60-80% and are achieved in the first 30 min after ClO2 addition, during the first 16 days of the column operation using a mineral, coal-based, mesoporous GAC. Therefore, this carbon removes organic compounds that are more rapidly reactive with ClO2. Moreover, a good correlation was found between the ClO2-D and UV absorbance at wavelength 254 nm using mineral carbons; therefore, the use of a mineral mesoporous GAC is an effective solution to control the high ClO2-D in the disinfection stage of a DWTP. PMID:25465650

  5. Energy implications of bottled water

    NASA Astrophysics Data System (ADS)

    Gleick, P. H.; Cooley, H. S.

    2009-01-01

    As bottled water use continues to expand around the world, there is growing interest in the environmental, economical, and social implications of that use, including concerns about waste generation, proper use of groundwater, hydrologic effects on local surface and groundwater, economic costs, and more. A key concern is how much energy is required to produce and use bottled water. This paper estimates the energy footprint required for various phases of bottled water production, transportation, and use. We do not develop a single comprehensive life-cycle energy estimate because of differences among water sources, bottling processes, transportation costs, and other factors, but we quantify key energy inputs necessary for site-specific assessments. We also apply these inputs to three site-specific examples of the energy required from production to the point of use: local bottled water produced and used in Los Angeles, water bottled in the South Pacific and shipped by cargo ship to Los Angeles, and water bottled in France and shipped in various ways to Los Angeles. For water transported short distances, the energy requirements of bottled water are dominated by the energy used to produce the plastic bottles. Long-distance transport, however, can lead to energy costs comparable to, or even larger than, those of producing the bottle. All other energy costs—for processing, bottling, sealing, labeling, and refrigeration—are far smaller than those for the production of the bottle and transportation. These data can be used to generate specific estimates for different sources, treatments, and delivery options.

  6. Biphasic catalysis in water/carbon dioxide micellar systems

    DOEpatents

    Jacobson, Gunilla B.; Tumas, William; Johnston, Keith P.

    2002-01-01

    A process is provided for catalyzing an organic reaction to form a reaction product by placing reactants and a catalyst for the organic reaction, the catalyst of a metal complex and at least one ligand soluble within one of the phases of said aqueous biphasic system, within an aqueous biphasic system including a water phase, a dense phase fluid, and a surfactant adapted for forming an emulsion or microemulsion within the aqueous biphasic system, the reactants soluble within one of the phases of the aqueous biphasic system and convertible in the presence of the catalyst to a product having low solubility in the phase in which the catalyst is soluble; and, maintaining the aqueous biphasic system under pressures, at temperatures, and for a period of time sufficient for the organic reaction to occur and form the reaction product and to maintain sufficient density on the dense phase fluid, the reaction product characterized as having low solubility in the phase in which the catalyst is soluble.

  7. Interference of oxygen, carbon dioxide, and water vapor on the analysis for oxides of nitrogen by chemiluminescence

    NASA Technical Reports Server (NTRS)

    Maahs, H. G.

    1975-01-01

    The interference of small concentrations (less than 4 percent by volume) of oxygen, carbon dioxide, and water vapor on the analysis for oxides of nitrogen by chemiluminescence was measured. The sample gas consisted primarily of nitrogen, with less than 100 parts per million concentration of nitric oxide, and with small concentrations of oxygen, carbon dioxide, and water vapor added. Results obtained under these conditions indicate that although oxygen does not measurably affect the analysis for nitric oxide, the presence of carbon dioxide and water vapor causes the indicated nitric oxide concentration to be too low. An interference factor - defined as the percentage change in indicated nitric oxide concentration (relative to the true nitric oxide concentration) divided by the percent interfering gas present - was determined for carbon dioxide to be -0.60 + or - 0.04 and for water vapor to be -2.1 + or - 0.3.

  8. Growth, yield and plant water relationships in sweet potatoes in response to carbon dioxide enrichment: Progress report

    SciTech Connect

    Not Available

    1986-01-01

    In the summer of 1985, under the joint program of US Department of Energy, Carbon Dioxide Division, and Tuskegee University, experiments were conducted to study growth, yield, photosynthesis and plant water relationships in sweet potato plants grown in an enriched CO/sub 2/ environment. The main experiment utilized open top chambers to study the effects of CO/sub 2/ and soil moisture on growth, yield and photosynthesis of field-grown plants. In addition, potted plants in open top chambers were utilized in a study of the effects of different CO/sub 2/ concentrations on growth pattern, relative growth rate, net assimilation rate and biomass increment at different stages of development. The interaction effects of enriched CO/sub 2/ and water stress on biomass production, yield, xylem potential, and stomatal conductance were also investigated. 29 refs., 18 figs., 41 tabs.

  9. New Demands, New Supplies: A National Look at the Water Balance of Carbon Dioxide Capture and Sequestration

    NASA Astrophysics Data System (ADS)

    Roach, J. D.; Kobos, P.; Klise, G. T.; Krumhansl, J. L.; McNemar, A.

    2010-12-01

    Concerns over rising concentrations of greenhouse gases in the atmosphere have resulted in serious consideration of policies aimed at reduction of anthropogenic carbon dioxide (CO2) emissions. If large scale abatement efforts are undertaken, one critical tool will be geologic sequestration of CO2 captured from large point sources, specifically coal and natural gas fired power plants. Current CO2 capture technologies exact a substantial energy penalty on the source power plant, which must be offset with make-up power. Water demands increase at the source plant due to added cooling loads. In addition, new water demand is created by water requirements associated with generation of the make-up power. At the sequestration site however, saline water may be extracted to manage CO2 plum migration and pressure build up in the geologic formation. Thus, while CO2 capture creates new water demands, CO2 sequestration has the potential to create new supplies. Some or all of the added demand may be offset by treatment and use of the saline waters extracted from geologic formations during CO2 sequestration. Sandia National Laboratories, with guidance and support from the National Energy Technology Laboratory, is creating a model to evaluate the potential for a combined approach to saline formations, as a sink for CO2 and a source for saline waters that can be treated and beneficially reused to serve power plant water demands. This presentation will focus on the magnitude of added U.S. power plant water demand under different CO2 emissions reduction scenarios, and the portion of added demand that might be offset by saline waters extracted during the CO2 sequestration process. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000.

  10. New demands, new supplies : a national look at the water balance of carbon dioxide capture and sequestration.

    SciTech Connect

    Krumhansl, James Lee; McNemar, Andrea , Morgantown, WV); Kobos, Peter Holmes; Roach, Jesse Dillon; Klise, Geoffrey Taylor

    2010-12-01

    Concerns over rising concentrations of greenhouse gases in the atmosphere have resulted in serious consideration of policies aimed at reduction of anthropogenic carbon dioxide (CO2) emissions. If large scale abatement efforts are undertaken, one critical tool will be geologic sequestration of CO2 captured from large point sources, specifically coal and natural gas fired power plants. Current CO2 capture technologies exact a substantial energy penalty on the source power plant, which must be offset with make-up power. Water demands increase at the source plant due to added cooling loads. In addition, new water demand is created by water requirements associated with generation of the make-up power. At the sequestration site however, saline water may be extracted to manage CO2 plum migration and pressure build up in the geologic formation. Thus, while CO2 capture creates new water demands, CO2 sequestration has the potential to create new supplies. Some or all of the added demand may be offset by treatment and use of the saline waters extracted from geologic formations during CO2 sequestration. Sandia National Laboratories, with guidance and support from the National Energy Technology Laboratory, is creating a model to evaluate the potential for a combined approach to saline formations, as a sink for CO2 and a source for saline waters that can be treated and beneficially reused to serve power plant water demands. This presentation will focus on the magnitude of added U.S. power plant water demand under different CO2 emissions reduction scenarios, and the portion of added demand that might be offset by saline waters extracted during the CO2 sequestration process.

  11. Application of Vacuum Swing Adsorption for Carbon Dioxide and Water Vapor Removal from Manned Spacecraft Atmospheres

    NASA Technical Reports Server (NTRS)

    Knox, J.; Fulda, P.; Howard, D.; Ritter, J.; Levan, M.

    2007-01-01

    The design and testing of a vacuum-swing adsorption process to remove metabolic 'water and carbon dioxide gases from NASA's Orion crew exploration vehicle atmosphere is presented. For the Orion spacecraft, the sorbent-based atmosphere revitalization (SBAR) system must remove all metabolic water, a technology approach 1Lhathas not been used in previous spacecraft life support systems. Design and testing of a prototype SBAR in sub-scale and full-scale configurations is discussed. Experimental and analytical investigations of dual-ended and single-ended vacuum desorption are presented. An experimental investigation of thermal linking between adsorbing and desorbing columns is also presented.

  12. Initial interaction of sulfur dioxide with water covered metal surfaces: An in situ IRAS study

    SciTech Connect

    Persson, D.; Leygraf, C.

    1995-05-01

    Sulfur dioxide is considered to be one of the most important stimulators of atmospheric corrosion in outdoor environments and numerous investigations have been made to understand its role. Despite clear evidence of the corrosion accelerating effect of SO{sub 2} there is still a lack in detailed knowledge on a molecular level of how SO{sub 2} interacts with metal surfaces during conditions of atmospheric corrosion. In situ infrared reflection absorption spectroscopy (IRAS) has been used to study the initial interaction of sulfur dioxide with water adlayer covered copper, nickel, and zinc surfaces. Each metal was exposed to 0.21 ppm SO{sub 2} in flowing air at 80% relative humidity and the formation of sulfite was followed from submonolayer thickness to layers of corrosion products of a few manometers thickness. From the positions of sulfite bonds in the experimentally obtained IRAS spectra and from considerations of optically induced band shifts in calculated IRAS spectra, it is suggested that the sulfite ions are coordinated with sulfur or sulfur and oxygen to the copper surface and with oxygen to the nickel and zinc surfaces. A fast initial growth rate was observed for the sulfite layer, which was followed by a slower growth rate after a few hours of exposure. A reaction sequence is suggested where bisulfite ions, formed by hydrolysis of sulfur dioxide in the water adlayer, generate surface metal-sulfite complexes at the oxide covered metal surface which subsequently detach from the surface and precipitate as thin layers of corrosion products.

  13. Storage and recycling of water and carbon dioxide in the earth

    NASA Technical Reports Server (NTRS)

    Wood, Bernard J.

    1994-01-01

    The stabilities and properties of water- and carbon-bearing phases in the earth have been determined from phase equilibrium measurements, combined with new data on the equations of state of water, carbon dioxide, carbonates and hydrates. The data have then been used to predict the fate of calcite and hydrous phases in subducting oceanic lithosphere. From the compositions of MORB's one can estimate concentrations of water and carbon of around 200 ppm and 80 ppm respectively in the upper mantle. Lower mantle estimates are very uncertain, but 1900 ppm water and 2000 ppm C are plausible concentrations. Measurements of the density of supercritical water to 3 GPa demonstrate that this phase is less compressible than anticipated from the equations of state of Haar et al. or Saul and Wagner and is closer to predictions based on molecular dynamics simulations. Conversely, fugacity measurements on carbon dioxide to 7 GPa show that this fluid is more compressible than predicted from the MRK equation of state. The results imply that hydrates are relatively more stable and carbonates less stable at pressures greater than 5 GPa than would be predicted from simple extrapolation of the low pressure data. Nevertheless, carbonates remain extremely refractory phases within both the upper and lower mantle.

  14. Carbon dioxide emissions, GDP, energy use, and population growth: a multivariate and causality analysis for Ghana, 1971-2013.

    PubMed

    Asumadu-Sarkodie, Samuel; Owusu, Phebe Asantewaa

    2016-07-01

    In this study, the relationship between carbon dioxide emissions, GDP, energy use, and population growth in Ghana was investigated from 1971 to 2013 by comparing the vector error correction model (VECM) and the autoregressive distributed lag (ARDL). Prior to testing for Granger causality based on VECM, the study tested for unit roots, Johansen's multivariate co-integration and performed a variance decomposition analysis using Cholesky's technique. Evidence from the variance decomposition shows that 21 % of future shocks in carbon dioxide emissions are due to fluctuations in energy use, 8 % of future shocks are due to fluctuations in GDP, and 6 % of future shocks are due to fluctuations in population. There was evidence of bidirectional causality running from energy use to GDP and a unidirectional causality running from carbon dioxide emissions to energy use, carbon dioxide emissions to GDP, carbon dioxide emissions to population, and population to energy use. Evidence from the long-run elasticities shows that a 1 % increase in population in Ghana will increase carbon dioxide emissions by 1.72 %. There was evidence of short-run equilibrium relationship running from energy use to carbon dioxide emissions and GDP to carbon dioxide emissions. As a policy implication, the addition of renewable energy and clean energy technologies into Ghana's energy mix can help mitigate climate change and its impact in the future. PMID:27030236

  15. Smart Water: Energy-Water Optimization in Drinking Water Systems

    EPA Science Inventory

    This project aims to develop and commercialize a Smart Water Platform – Sensor-based Data-driven Energy-Water Optimization technology in drinking water systems. The key technological advances rely on cross-platform data acquisition and management system, model-based real-time sys...

  16. Effect of water on the carbon dioxide absorption by 1-alkyl-3-methylimidazolium acetate ionic liquids.

    PubMed

    Stevanovic, Stéphane; Podgoršek, Ajda; Pádua, Agilio A H; Costa Gomes, Margarida F

    2012-12-13

    The absorption of carbon dioxide by the pure ionic liquids 1-ethyl-3-methylimidazolium acetate ([C(1)C(2)Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C(1)C(4)Im][OAc]) was studied experimentally from 303 to 343 K. As expected, the mole fraction of absorbed carbon dioxide is high (0.16 at 303 K and 5.5 kPa and 0.19 at 303 and 9.6 KPa for [C(1)C(2)Im][OAc] and [C(1)C(4)Im][OAc], respectively), does not obey Henry's law, and is compatible with the chemisorption of the gas by the liquid. Evidence of a chemical reaction between the gas and the liquid was found both by NMR and by molecular simulation. In the presence of water, the properties of the liquid absorber significantly change, especially the viscosity that decreases by as much as 25% (to 78 mPa s) and 30% (to 262 mPa s) in the presence of 0.2 mol fraction of water for [C(1)C(2)Im][OAc] and [C(1)C(2)Im][OAc] at 303 K, respectively. The absorption of carbon dioxide decreases when the water concentration increases: a decrease of 83% in CO(2) absorption is found for [C(1)C(4)Im][OAc] with 0.6 mol fraction of water at 303 K. It is proved in this work, by combining experimental data with molecular simulation, that the presence of water not only renders the chemical reaction between the gas and the ionic liquid less favorable but also lowers the (physical) solubility of the gas as it competes by the same solvation sites of the ionic liquid. The lowering of the viscosity of the liquid absorbent largely compensates these apparent drawbacks and the mixtures of [C(1)C(2)Im][OAc] and [C(1)C(2)Im][OAc] with water seem promising to be used for carbon dioxide capture. PMID:23145571

  17. The carbon dioxide-water interface at conditions of gas hydrate formation.

    PubMed

    Lehmkühler, Felix; Paulus, Michael; Sternemann, Christian; Lietz, Daniela; Venturini, Federica; Gutt, Christian; Tolan, Metin

    2009-01-21

    The structure of the carbon dioxide-water interface was analyzed by X-ray diffraction and reflectivity at temperature and pressure conditions which allow the formation of gas hydrate. The water-gaseous CO2 and the water-liquid CO2 interface were examined. The two interfaces show a very different behavior with respect to the formation of gas hydrate. While the liquid-gas interface exhibits the formation of thin liquid CO2 layers on the water surface, the formation of small clusters of gas hydrate was observed at the liquid-liquid interface. The data obtained from both interfaces points to a gas hydrate formation process which may be explained by the so-called local structuring hypothesis. PMID:19105749

  18. The effects of rising atmospheric carbon dioxide on shoot-root nitrogen and water signaling

    PubMed Central

    Easlon, Hsien Ming; Bloom, Arnold J.

    2013-01-01

    Terrestrial higher plants are composed of roots and shoots, distinct organs that conduct complementary functions in dissimilar environments. For example, roots are responsible for acquiring water and nutrients such as inorganic nitrogen from the soil, yet shoots consume the majority of these resources. The success of such a relationship depends on excellent root–shoot communications. Increased net photosynthesis and decreased shoot nitrogen and water use at elevated CO2 fundamentally alter these source–sink relations. Lower than predicted productivity gains at elevated CO2 under nitrogen or water stress may indicate shoot–root signaling lacks plasticity to respond to rising atmospheric CO2 concentrations. The following presents recent research results on shoot–root nitrogen and water signaling, emphasizing the influence that rising atmospheric carbon dioxide levels are having on these source–sink interactions. PMID:23983674

  19. Energy use and carbon dioxide emissions in the steel sector in key developing countries

    SciTech Connect

    Price, L.K.; Phylipsen, G.J.M.; Worrell, E.

    2001-04-01

    Iron and steel production consumes enormous quantities of energy, especially in developing countries where outdated, inefficient technologies are still used to produce iron and steel. Carbon dioxide emissions from steel production, which range between 5 and 15% of total country emissions in key developing countries (Brazil, China, India, Mexico, and South Africa), will continue to grow as these countries develop and as demand for steel products such as materials, automobiles, and appliances increases. In this report, we describe the key steel processes, discuss typical energy-intensity values for these processes, review historical trends in iron and steel production by process in five key developing countries, describe the steel industry in each of the five key developing countries, present international comparisons of energy use and carbon dioxide emissions among these countries, and provide our assessment of the technical potential to reduce these emissions based on best-practice benchmarking. Using a best practice benchmark, we find that significant savings, in the range of 33% to 49% of total primary energy used to produce steel, are technically possible in these countries. Similarly, we find that the technical potential for reducing intensities of carbon dioxide emissions ranges between 26% and 49% of total carbon dioxide emissions from steel production in these countries.

  20. Further Sensitivity Analysis of Hypothetical Policies to Limit Energy-Related Carbon Dioxide Emissions

    EIA Publications

    2013-01-01

    This analysis supplements the Annual Energy Outlook 2013 alternative cases which imposed hypothetical carbon dioxide emission fees on fossil fuel consumers. It offers further cases that examine the impacts of fees placed only on the emissions from electric power facilities, impacts of returning potential revenues to consumers, and two cap-and-trade policies.

  1. SYNTHESIS OF SULFUR-BASED WATER TREATMENT AGENT FROM SULFUR DIOXIDE WASTE STREAMS

    SciTech Connect

    Robert C. Brown; Maohong Fan

    2001-12-01

    We propose a process that uses sulfur dioxide from coal combustion as a raw material to synthesize polymeric ferric sulfate (PFS), a water treatment agent. The process uses sodium chlorate as an oxidant and ferrous sulfate as an absorbent. The major chemical mechanisms in this reaction system include oxidation, hydrolysis, and polymerization. Oxidation determines sulfur conversion efficiency while hydrolysis and polymerization control the quality of product. Many factors, including SO{sub 2} inlet concentration, flow rate of simulated flue gas, reaction temperature, addition rate of oxidant and stirring rate, may affect the efficiencies of SO{sub 2} removal. Currently, the effects of SO{sub 2} inlet concentration, the flow rate of simulated flue gas and addition rate of flue gas on removal efficiencies of SO{sub 2}, are being investigated. Experiments shown in this report have demonstrated that the conversion efficiencies of sulfur dioxide with ferrous sulfate as an absorbent are in the range of 60-80% under the adopted process conditions. However, the conversion efficiency of sulfur dioxide may be improved by optimizing reaction conditions to be investigated. Partial quality indices of the synthesized products, including Fe{sup 2+} concentration and total iron concentration, have been evaluated.

  2. Bactericidal activity of chlorine dioxide against Escherichia coli in water and on hard surfaces.

    PubMed

    Foschino, R; Nervegna, I; Motta, A; Galli, A

    1998-06-01

    The efficacy of chlorine dioxide as a disinfectant was evaluated against cells of Escherichia coli ATCC 11229 in aqueous suspension and adhering to the surfaces of stainless steel AISI 304 and PVC. The concentrations tested ranged from 0.7 to 14 mg/liter; the exposure times investigated were 30 s and 1, 2, 4, and 8 min. When the bacteria were suspended in water with 1.4 mg/liter of chlorine dioxide, a 10(5)-fold reduction of the initial viable count occurred within 30 s; when cells were attached to the steel surface, the same rate of inactivation took place only after 6 min with 7 mg/liter or 4 min with 14 mg/liter of chlorine dioxide. A 5-log reduction was not obtained when organisms were adhered to polyvinyl chloride (PVC). Scanning electron microscope micrographs of contaminated surfaces revealed that the PVC was very rough with pores much larger in diameter than the cells. Time values determining a 90% reduction of the E. coli population (90% killing time) were calculated for each concentration of disinfectant tested in suspension and on the steel surface. If the same experimental conditions were strictly adopted, linear functions of the log of bacterial inactivation could be plotted (log 90% killing time versus log concentration of disinfectant). This work showed that results obtained with suspension tests could not be used to estimate disinfection of hard surfaces. PMID:9709246

  3. Free Energy Minimization Calculation of Complex Chemical Equilibria. Reduction of Silicon Dioxide with Carbon at High Temperature.

    ERIC Educational Resources Information Center

    Wai, C. M.; Hutchinson, S. G.

    1989-01-01

    Discusses the calculation of free energy in reactions between silicon dioxide and carbon. Describes several computer programs for calculating the free energy minimization and their uses in chemistry classrooms. Lists 16 references. (YP)

  4. Description of data on the Nimbus 7 LIMS map archive tape: Water vapor and nitrogen dioxide

    NASA Technical Reports Server (NTRS)

    Haggard, Kenneth V.; Marshall, B. T.; Kurzeja, Robert J.; Remsberg, Ellis E.; Russell, James M., III

    1988-01-01

    Described is the process by which the analysis of the Limb Infrared Monitor of the Stratosphere (LIMS) experiment data were used to produce estimates of synoptic maps of water vapor and nitrogen dioxide. In addition to a detailed description of the analysis procedure, also discussed are several interesting features in the data which are used to demonstrate how the analysis procedure produced the final maps and how one can estimate the uncertainties in the maps. In addition, features in the analysis are noted that would influence how one might use, or interpret, the results. These include subjects such as smoothing and the interpretation of wave components.

  5. Energy efficiency and carbon dioxide emissions reduction opportunities in the U.S. cement industry

    SciTech Connect

    Martin, Nathan; Worrell, Ernst; Price, Lynn

    1999-08-01

    This paper reports on an in-depth analysis of the U.S. cement industry, identifying cost-effective energy efficiency measures and potentials. The authors assess this industry at the aggregate level (Standard Industrial Classification 324), which includes establishments engaged in manufacturing hydraulic cements, including Portland, natural, masonry, and pozzolana when reviewing industry trends and when making international comparisons. Coal and coke are currently the primary fuels for the sector, supplanting the dominance of natural gas in the 1970s. Between 1970 and 1997, primary physical energy intensity for cement production (SIC 324) dropped 30%,from 7.9 GJ/t to 5.6 GJ/t, while carbon dioxide intensity due to fuel consumption (carbon dioxide emissions expressed in tons of carbon per ton cement) dropped 25%, from 0.16 tC/ton to 0.12 tC/ton. Carbon dioxide intensity due to fuel consumption and clinker calcination dropped 17%, from 0.29 tC/ton to 0.24 tC/ton. They examined 30 energy efficient technologies and measures and estimated energy savings, carbon dioxide savings, investment costs, and operation and maintenance costs for each of the measures. They constructed an energy conservation supply curve for U.S. cement industry which found a total cost-effective reduction of 0.6 GJ/ton of cement consisting of measures having a simple payback period of 3 years or less. This is equivalent to potential energy savings of 11% of 1994 energy use for cement making and a savings of 5% of total 1994 carbon dioxide emissions by the U.S. cement industry. Assuming the increased production of blended cement in the U.S., as is common in many parts of the world, the technical potential for energy efficiency improvement would not change considerably. However, the cost-effective potential, would increase to 1.1 GJ/ton cement or 18% of total energy use, and carbon dioxide emissions would be reduced by 16%.

  6. Modeling Caspian Sea water level oscillations under different scenarios of increasing atmospheric carbon dioxide concentrations

    PubMed Central

    2012-01-01

    The rapid rise of Caspian Sea water level (about 2.25 meters since 1978) has caused much concern to all five surrounding countries, primarily because flooding has destroyed or damaged buildings and other engineering structures, roads, beaches and farm lands in the coastal zone. Given that climate, and more specifically climate change, is a primary factor influencing oscillations in Caspian Sea water levels, the effect of different climate change scenarios on future Caspian Sea levels was simulated. Variations in environmental parameters such as temperature, precipitation, evaporation, atmospheric carbon dioxide and water level oscillations of the Caspian sea and surrounding regions, are considered for both past (1951-2006) and future (2025-2100) time frames. The output of the UKHADGEM general circulation model and five alternative scenarios including A1CAI, BIASF, BIMES WRE450 and WRE750 were extracted using the MAGICC SCENGEN Model software (version 5.3). The results suggest that the mean temperature of the Caspian Sea region (Bandar-E-Anzali monitoring site) has increased by ca. 0.17°C per decade under the impacts of atmospheric carbon dioxide changes (r=0.21). The Caspian Sea water level has increased by ca. +36cm per decade (r=0.82) between the years 1951-2006. Mean results from all modeled scenarios indicate that the temperature will increase by ca. 3.64°C and precipitation will decrease by ca. 10% (182 mm) over the Caspian Sea, whilst in the Volga river basin, temperatures are projected to increase by ca. 4.78°C and precipitation increase by ca. 12% (58 mm) by the year 2100. Finally, statistical modeling of the Caspian Sea water levels project future water level increases of between 86 cm and 163 cm by the years 2075 and 2100, respectively. PMID:23369617

  7. Copper and cerium co-doped titanium dioxide on catalytic photo reduction of carbon dioxide with water: Experimental and theoretical studies

    NASA Astrophysics Data System (ADS)

    Luo, Dongmei; Bi, Ye; Kan, Wei; Zhang, Ning; Hong, Sanguo

    2011-05-01

    The catalytic activities of copper and cerium co-doped titanium dioxide were studied experimentally and theoretically in the synthesis of methanol by the photo reduction of carbon dioxide with water firstly. Photo catalysts copper and cerium co-doped titanium dioxide were prepared via the equivalent-volume incipient wetness impregnation method. The catalysts were characterized by XRD, Raman, BET, and electrochemistry analyses. The catalytic properties were determined in the synthesis of methanol from CO 2 in the aqueous solution. The experimental results suggested that Cu/Ce-TiO 2 catalysts obviously enhanced the efficiency of the photocatalytic reduction of CO 2. The methanol yield could reach up to 180.3 μmol/g-cat rapidly. The different effects of copper and cerium on the surface of titanium dioxide have been calculated at the Becke's three-parameter hybrid exchange functional together with the Lee-Yang-Parr correlation functional (B3LYP) level. Our results revealed that Ce atoms affect the reaction more profoundly than Cu atoms do. Ce atoms activated H 2O and CO 2 molecules, while Cu atoms act as the channel of photoelectrons in real time and prevent the recombination of electrons and holes.

  8. Application of electrochemical technology for removing petroleum hydrocarbons from produced water using lead dioxide and boron-doped diamond electrodes.

    PubMed

    Gargouri, Boutheina; Gargouri, Olfa Dridi; Gargouri, Bochra; Trabelsi, Souhel Kallel; Abdelhedi, Ridha; Bouaziz, Mohamed

    2014-12-01

    Although diverse methods exist for treating polluted water, the most promising and innovating technology is the electrochemical remediation process. This paper presents the anodic oxidation of real produced water (PW), generated by the petroleum exploration of the Petrobras plant-Tunisia. Experiments were conducted at different current densities (30, 50 and 100 mA cm(-2)) using the lead dioxide supported on tantalum (Ta/PbO2) and boron-doped diamond (BDD) anodes in an electrolytic batch cell. The electrolytic process was monitored by the chemical oxygen demand (COD) and the residual total petroleum hydrocarbon [TPH] in order to know the feasibility of electrochemical treatment. The characterization and quantification of petroleum wastewater components were performed by gas chromatography mass spectrometry. The COD removal was approximately 85% and 96% using PbO2 and BDD reached after 11 and 7h, respectively. Compared with PbO2, the BDD anode showed a better performance to remove petroleum hydrocarbons compounds from produced water. It provided a higher oxidation rate and it consumed lower energy. However, the energy consumption and process time make useless anodic oxidation for the complete elimination of pollutants from PW. Cytotoxicity has shown that electrochemical oxidation using BDD could be efficiently used to reduce more than 90% of hydrocarbons compounds. All results suggest that electrochemical oxidation could be an effective approach to treat highly concentrated organic pollutants present in the industrial petrochemical wastewater and significantly reduce the cost and time of treatment. PMID:25129707

  9. Defective titanium dioxide single crystals exposed by high-energy {001} facets for efficient oxygen reduction

    NASA Astrophysics Data System (ADS)

    Pei, Dan-Ni; Gong, Li; Zhang, Ai-Yong; Zhang, Xing; Chen, Jie-Jie; Mu, Yang; Yu, Han-Qing

    2015-10-01

    The cathodic material plays an essential role in oxygen reduction reaction for energy conversion and storage systems. Titanium dioxide, as a semiconductor material, is usually not recognized as an efficient oxygen reduction electrocatalyst owning to its low conductivity and poor reactivity. Here we demonstrate that nano-structured titanium dioxide, self-doped by oxygen vacancies and selectively exposed with the high-energy {001} facets, exhibits a surprisingly competitive oxygen reduction activity, excellent durability and superior tolerance to methanol. Combining the electrochemical tests with density-functional calculations, we elucidate the defect-centred oxygen reduction reaction mechanism for the superiority of the reductive {001}-TiO2-x nanocrystals. Our findings may provide an opportunity to develop a simple, efficient, cost-effective and promising catalyst for oxygen reduction reaction in energy conversion and storage technologies.

  10. Defective titanium dioxide single crystals exposed by high-energy {001} facets for efficient oxygen reduction

    PubMed Central

    Pei, Dan-Ni; Gong, Li; Zhang, Ai-Yong; Zhang, Xing; Chen, Jie-Jie; Mu, Yang; Yu, Han-Qing

    2015-01-01

    The cathodic material plays an essential role in oxygen reduction reaction for energy conversion and storage systems. Titanium dioxide, as a semiconductor material, is usually not recognized as an efficient oxygen reduction electrocatalyst owning to its low conductivity and poor reactivity. Here we demonstrate that nano-structured titanium dioxide, self-doped by oxygen vacancies and selectively exposed with the high-energy {001} facets, exhibits a surprisingly competitive oxygen reduction activity, excellent durability and superior tolerance to methanol. Combining the electrochemical tests with density-functional calculations, we elucidate the defect-centred oxygen reduction reaction mechanism for the superiority of the reductive {001}-TiO2−x nanocrystals. Our findings may provide an opportunity to develop a simple, efficient, cost-effective and promising catalyst for oxygen reduction reaction in energy conversion and storage technologies. PMID:26493365

  11. A model of vertical exchange of water and carbon dioxide in the boreal ecosystem

    NASA Astrophysics Data System (ADS)

    Kuchment, L. S.; Demidov, V. N.; Startseva, Z. P.

    2003-04-01

    The vertical movement of soil moisture is described by the Richards equation including the term accounting for water extraction by plant roots. Evapotranspiration is presented in the form of two separate fluxes: the evaporation from the soil surface and the transpiration. The bulb formulas have been used to calculate both these components. The ground and leave temperatures are calculated on the basis of heat balance approach using the solar radiation components as input data. The stomatal resistance is a function of leave water potential and photosynthesis. The photosynthesis is calculated as the diffusion of carbon dioxide through the stomatal openings or the leaf photosynthesis model is applied. To estimate the canopy dark respiration and the respiration from soil, root and stem empirical formulas are used. The model has been calibrated and validated on the basis of tower flux and meteorological data obtained for Southern Study Area Old Jack Pine site (Saskatchevan, Canada) during the 1994 BOREAS project. The influence of soil moisture content on the carbon dioxide fluxes and the photosynthesis has been investigated.

  12. Nanostructured water and carbon dioxide inside collapsing carbon nanotubes at high pressure.

    PubMed

    Cui, Wenwen; Cerqueira, Tiago F T; Botti, Silvana; Marques, Miguel A L; San-Miguel, Alfonso

    2016-07-20

    We present simulations of the collapse under hydrostatic pressure of carbon nanotubes containing either water or carbon dioxide. We show that the molecules inside the tube alter the dynamics of the collapse process, providing either mechanical support and increasing the collapse pressure, or reducing mechanical stability. At the same time the nanotube acts as a nanoanvil, and the confinement leads to the nanostructuring of the molecules inside the collapsed tube. In this way, depending on the pressure and on the concentration of water or carbon dioxide inside the nanotube, we observe the formation of 1D molecular chains, 2D nanoribbons, and even molecular single and multi-walled nanotubes. The structure of the encapsulated molecules correlates with the mechanical response of the nanotube, opening up opportunities for the development of new devices or composite materials. Our analysis is quite general and it can be extended to other molecules in carbon nanotube nanoanvils, providing a strategy to obtain a variety of nano-objects with controlled features. PMID:27400409

  13. Henry Cavendish (1731-1810): hydrogen, carbon dioxide, water, and weighing the world.

    PubMed

    West, John B

    2014-07-01

    Henry Cavendish (1731-1810) was an outstanding chemist and physicist. Although he was not a major figure in the history of respiratory physiology he made important discoveries concerning hydrogen, carbon dioxide, atmospheric air, and water. Hydrogen had been prepared earlier by Boyle but its properties had not been recognized; Cavendish described these in detail, including the density of the gas. Carbon dioxide had also previously been studied by Black, but Cavendish clarified its properties and measured its density. He was the first person to accurately analyze atmospheric air and reported an oxygen concentration very close to the currently accepted value. When he removed all the oxygen and nitrogen from an air sample, he found that there was a residual portion of about 0.8% that he could not characterize. Later this was shown to be argon. He produced large amounts of water by burning hydrogen in oxygen and recognized that these were its only constituents. Cavendish also worked on electricity and heat. However, his main contribution outside chemistry was an audacious experiment to measure the density of the earth, which he referred to as "weighing the world." This involved determining the gravitational attraction between lead spheres in a specially constructed building. Although this was a simple experiment in principle, there were numerous complexities that he overcame with meticulous attention to experimental details. His result was very close to the modern accepted value. The Cavendish Experiment, as it is called, assures his place in the history of science. PMID:24793169

  14. LADEE NMS Observations of Sporadic Water and Carbon Dioxide Signatures in the Lunar Exosphere

    NASA Astrophysics Data System (ADS)

    Benna, M.; Mahaffy, P. R.; Hurley, D.; Stubbs, T. J.; Hodges, R. R., Jr.; Elphic, R. C.

    2014-12-01

    During its six months in orbit, the Lunar Atmosphere and Dust Environment Explorer (LADEE) has detected signatures of water and carbon dioxide in the exosphere of the Moon. The signature of these two volatile gases has been measured by the Neutral Mass Spectrometer (NMS) as sporadic short-lived signal increases above instrument background. Following the detection of these two species in the exosphere, a systematic measurement campaign with a cadence of few hours over four main lunar local time sectors (sunrise, midnight, sunset, and noon) was put in place and continued to the end of the mission. While this measurement campaign did not reveal any local time dependence for these sporadic signal events, it showed that they are globally correlated with predicted micrometeoroid streams. Moreover, a subset of these NMS observations were acquired at low altitudes when water and carbon dioxide signals were below instrumental background, and used to establish new upper limits of the background abundances of these two gases in the exosphere.

  15. Analysis of field measurements of carbon dioxide and water vapor fluxes

    NASA Technical Reports Server (NTRS)

    Verma, Shashi B.

    1991-01-01

    Analysis of the field measurements of carbon dioxide and water vapor fluxes is discussed. These data were examined in conjunction with reflectance obtained from helicopter mounted Modular Multiband Radiometer. These measurements are representative of the canopy scale (10 to 100 m)(exp 2) and provide a good basis for investigating the hypotheses/relationship potentially useful in remote sensing applications. All the micrometeorological data collected during FIFE-89 were processed and fluxes of CO2, water vapor, and sensible heat were calculated. Soil CO2 fluxes were also estimated. Employing these soil CO2 flux values, in conjunction with micrometeorological measurements, canopy photosynthesis is being estimated. A biochemical model of leaf photosynthesis was adapted to the prairie vegetation. The modeled leaf photosynthesis rates were scaled up to the canopy level. This model and a multiplicative stomatal conductance model are also used to calculate canopy conductance.

  16. Flexible Pipes-Permeation of Methane, Carbon Dioxide and Water Through Tefzel ETFE: Experiments 1996

    NASA Technical Reports Server (NTRS)

    Wang, Per Arne; Hydro, Norsk

    1997-01-01

    The permeation of a mixture of CH4 and CO2 (97% CH4 and 3% CO2) saturated with water vapour through Tefzel has been studied at 950 C and 25 and 50 bars. Tefzel is the Du Pont trademark of an ETFE (ethylenetetrafluorethylene) which is a copolymer of ethylene and tetrafluorethylene. This material might be used as inner plastic lining of flexible pipes. For methane and carbon dioxide, the permeability of Tefzel is higher than the deplasticized PVDF (Polyvinylidenefluoride), but lower than the plasticized PVDF. For water, the situation seems to be the other way round; Tefzel has a lower permeability than deplasticized PVDF. Whether the permeability tests on Tefzel at higher temperatures and pressures will be pursued or not, will be considered by the steering committee of the CAPP project in May.

  17. Mitigation of carbon dioxide from the Indonesia energy system

    SciTech Connect

    Adi, A.C.; Nurrohim, A.; Hidajat, M.N.

    1996-12-31

    Energy consumption in Indonesia is growing fast in line with the development of national economy. During (1990 - 1993) the emission of CO{sub 2} gas coming from energy sector increased from 150 million tones to 200 million tones in 1993. Whereas, the total methane emission from the oil, gas and coal sub-sector reached 550 kilo tones in 1991 and increased to 670 kilo tones in 1994. This amount of CO{sub 2} and Methane from energy sector was 26% and 10 % respectively of the total emission of Indonesia. Based on the last two decades of Indonesia`s economic growth experience, as a developing country this high economic growth rate of Indonesia in the future will be kept until reaching the newly industrialized country level, which is more than 6% annually in the next decade. This high growth rate economic projection will also added the level of GHG emission in the future. As a developing country Indonesia is one of the fast growing countries. The GDP growth in the year 1995 was more than 7 percent, therefore growth rate of energy consumption in this country also rose following the economic growth.

  18. Emulsions and microemulsions of water and carbon dioxide: Novel surfactants and stabilization mechanisms

    NASA Astrophysics Data System (ADS)

    Ryoo, Won Sun

    During the last two decades colloid and interface science in the field of supercritical fluid technology has brought enormous potentials in the utilization of supercritical carbon dioxide as an environmentally benign solvent. Liquid or supercritical CO2 exhibits solvent properties that are tunable with pressure, and is essentially nontoxic and nonflammable. Emulsions and microemulsions of water and CO2, whether in the form of water-in-CO 2 (w/c) or CO2-in-water (c/w), offer new possibilities for separations on the basis of polarity, and as media for reactions between polar and nonpolar molecules. For the first time, formation of thermodynamically stable c/w microemulsions was characterized by dynamic light scattering (DLS) technique. High-pressure carbon dioxide swells potassium carboxylate perfluoropolyether (PFPE-K) cylindrical micelles in water, elongating the micelles significantly from 20 up to 80 nm. As the micelles swell to form microemulsions, the solubility of pyrene increases by a factor of ca. 10. It was demonstrated w/c microemulsions may be formed with nonionic hydrocarbon surfactant. Methylated branched tail of the surfactant enhances formation of stable w/c microemulsions as it raises surfactant solubility in CO2, shifts the curvature towards bending about water, and weakens interdroplet interactions by reducing overlap between surfactant tails. As a novel medium for reactions, w/c microemulsions with low water content are utilized for the synthesis of TiO2 nanoparticles via the controlled hydrolysis of titanium tetraisopropoxide. The size of particles could be controlled by adjusting the water-to-surfactant ratio (wo). Based on DLS measurements, the size of TiO2 particles was comparable to that of the microemulsion droplets indicating steric stabilization was sufficient during the rapid hydrolysis. Finally, electrostatic repulsion between water droplets of w/c emulsion was explored as an alternative to the steric stabilization mechanism. Negative

  19. Sabatier Carbon Dioxide Reduction Assembly Development for Closed Loop Water Recovery

    NASA Technical Reports Server (NTRS)

    Smith, Frederick; Perry, Jay; Murdoch, Karen; Goldblatt, Loel

    2004-01-01

    The Sabatier Carbon Dioxide Reduction System (CRA) offers water recovery on a long duration space mission to reduce water resupply. Currently, NASA Johnson Space Center (JSC), NASA Marshall Space Flight Center (MSFC), Hamilton Sundstrand Space Systems International, Inc. (HSSSI), and Southwest Research Institute (SWRI) are working together to develop a Sabatier CRA for the International Space Station (ISS). This effort is being funded by the Office of Biological and Physical Research (Code U)/Advanced Life Support program which is administered by NASA JSC. The Sabatier CRA is the next step in closing the oxygen life support loop on future space missions. The Sabatier reaction combines the waste carbon dioxide (recovered from crew metabolism) with waste hydrogen (a byproduct of electrolysis to produce oxygen) to produce water and methane (CH4). On ISS, the methane would be vented overboard, however the methane can be utilized for propulsion during a planetary exploration mission. Based on a crew size of 7-equivalent people, the Sabatier CRA can produce as much a 2000 lb/year water. Use of the Sabatier CRA will significantly reduce the amount of water that needs to be resupplied to the ISS on a yearly basis, at a tremendous cost saving to the program. Additionally, by recycling this additional water, the Sabatier CRA enables additional launch capacity for science experiments to be brought up to the ISS. The NASA/Industry team noted above has been working to reduce technical risks associated with the Sabatier CRA system. To date the technical risks have been considerably reduced, bringing the Technology Readiness Level (TRL) from TRL 4 to TRL 5/6. In doing so, the team has developed the system schematic, system models, control scheme, produced engineering development unit (EDU) hardware, performed limited integration testing of the EDU's and verified system modeling through testing. Additionally, the system schematic has been evaluated for failure modes and hazards

  20. Interaction of hydrogen chloride and water with oxide surfaces. III - Titanium dioxide

    NASA Technical Reports Server (NTRS)

    Siriwardane, R. V.; Wightman, J. P.

    1983-01-01

    The adsorption of hydrogen chloride and water vapors on five TiO2 powders in both the anatase and rutile crystalline forms was studied as a function of temperature, pressure, and outgas conditions. The adsorbents were characterized utilizing X-ray powder diffraction, scanning electron microscopy, surface area analysis, indicator method, microelectrophoresis, XPS, and infrared spectroscopy. It was found that both outgas temperature and adsorption temperature influenced the adsorption of water vapor on TiO2, while water vapor adsorption on TiO2 was completely reversible. It is argued that the number of hydroxyl groups present on the surface determines the adsorption capacity of water on the different titanium dioxides. It was found that heats of immersion in water were affected significantly by outgas temperature. Hydrogen chloride adsorption isotherms at 30 C measured on TiO2 after outgassing at 100-400 C showed that a part of the total HCl adsorbed was irreversibly adsorbed. The highest HCl adsorption capacity per unit area was exhibited by anatase, while pure rutile exhibited the lowest adsorption capacity.

  1. Crack Extension in Hydraulic Fracturing of Shale Cores Using Viscous Oil, Water, and Liquid Carbon Dioxide

    NASA Astrophysics Data System (ADS)

    Bennour, Ziad; Ishida, Tsuyoshi; Nagaya, Yuya; Chen, Youqing; Nara, Yoshitaka; Chen, Qu; Sekine, Kotaro; Nagano, Yu

    2015-07-01

    We performed hydraulic fracturing experiments on cylindrical cores of anisotropic shale obtained by drilling normal to the sedimentary plane. Experiments were conducted under ambient condition and uniaxial stresses, using three types of fracturing fluid: viscous oil, water, and liquid carbon dioxide (L-CO2). In the experiments using water and oil, cracks extended along the loading direction normal to the sedimentary plane under the uniaxial loading and extended along the sedimentary plane without loading. These results suggest that the direction of crack extension is strongly affected by in situ stress conditions. Fluorescent microscopy revealed that hydraulic fracturing with viscous oil produced linear cracks with few branches, whereas that with water produced cracks with many branches inclining from the loading axis. Statistical analysis of P wave polarity of acoustic emission waveforms showed that viscous oil tended to induce Mode I fracture, whereas both water and L-CO2 tended to induce Mode II fracture. Crack extension upon injection of L-CO2 was independent of loading condition unlike extension for the other two fluids. This result seemed attributable to the low viscosity of L-CO2 and was consistent with previous observations for granite specimens that low-viscosity fluids like CO2 tend to induce widely extending cracks with many branches, with Mode II fractures being dominant. These features are more advantageous for shale gas production than those induced by injection of conventional slick water.

  2. Energy costs of carbon dioxide concentrating mechanisms in aquatic organisms.

    PubMed

    Raven, John A; Beardall, John; Giordano, Mario

    2014-09-01

    Minimum energy (as photon) costs are predicted for core reactions of photosynthesis, for photorespiratory metabolism in algae lacking CO2 concentrating mechanisms (CCMs) and for various types of CCMs; in algae, with CCMs; allowance was made for leakage of CO2 from the internal pool. These predicted values are just compatible with the minimum measured photon costs of photosynthesis in microalgae and macroalgae lacking or expressing CCMs. More energy-expensive photorespiration, for example for organisms using Rubiscos with lower CO2-O2 selectivity coefficients, would be less readily accommodated within the lowest measured photon costs of photosynthesis by algae lacking CCMs. The same applies to the cases of CCMs with higher energy costs of active transport of protons or inorganic carbon species, or greater allowance for significant leakage from the accumulated intracellular pool of CO2. High energetic efficiency can involve a higher concentration of catalyst to achieve a given rate of reaction, adding to the resource costs of growth. There are no obvious mechanistic interpretations of the occurrence of CCMs algae adapted to low light and low temperatures using the rationales adopted for the occurrence of C4 photosynthesis in terrestrial flowering plants. There is an exception for cyanobacteria with low-selectivity Form IA or IB Rubiscos, and those dinoflagellates with low-selectivity Form II Rubiscos, for which very few natural environments have high enough CO2:O2 ratios to allow photosynthesis in the absence of CCMs. PMID:24390639

  3. Experimental carbon dioxide laser brain lesions and intracranial dynamics. Part 2. Effect on brain water content and its response to acute therapy

    SciTech Connect

    Tiznado, E.G.; James, H.E.; Moore, S.

    1985-04-01

    Experimental brain lesions were created over the left parietooccipital cortex of the albino rabbit through the intact dura mater with high radiating carbon dioxide laser energy. The brain water content was studied 2, 6, and 24 hours after the insult. Another two groups of animals received acute therapy with either dexamethasone (1 mg/kg) or furosemide (1 mg/kg). In all groups, Evans blue extravasation uniformly extended from the impact crater into the surrounding white matter. The brain water content in the gray matter was elevated from the control value by 2 hours after impact and remained elevated at 6 and 24 hours. The white matter brain water content did not increase until 6 hours after impact and remained elevated in the 24-hour group. After dexamethasone treatment, there was a significant decrease of water in the gray matter, but not in the white matter. With furosemide therapy, there was no reduction of gray or white matter brain water.

  4. Integrated Energy System with Beneficial Carbon Dioxide (CO2) Use - Final Scientific/Technical Report

    SciTech Connect

    Sun, Xiaolei; Rink, Nancy T

    2011-04-29

    This report presents an integrated energy system that combines the production of substitute natural gas through coal hydrogasification with an algae process for beneficial carbon dioxide (CO2) use and biofuel production (funded under Department of Energy (DOE) contract DE-FE0001099). The project planned to develop, test, operate and evaluate a 2 ton-per-day coal hydrogasification plant and 25-acre algae farm at the Arizona Public Service (APS) 1000 Megawatt (MW) Cholla coal-fired power plant in Joseph City, Arizona. Conceptual design of the integrated system was undertaken with APS partners Air Liquide (AL) and Parsons. The process engineering was separated into five major areas: flue gas preparation and CO2 delivery, algae farming, water management, hydrogasification, and biofuel production. The process flow diagrams, energy and material balances, and preliminary major equipment needs for each major area were prepared to reflect integrated process considerations and site infrastructure design basis. The total project also included research and development on a bench-scale hydrogasifier, one-dimensional (1-D) kinetic-model simulation, extensive algae stressing, oil extraction, lipid analysis and a half-acre algae farm demonstration at APS?s Redhawk testing facility. During the project, a two-acre algae testing facility with a half-acre algae cultivation area was built at the APS Redhawk 1000 MW natural gas combined cycle power plant located 55 miles west of Phoenix. The test site integrated flue gas delivery, CO2 capture and distribution, algae cultivation, algae nursery, algae harvesting, dewatering and onsite storage as well as water treatment. The site environmental, engineering, and biological parameters for the cultivators were monitored remotely. Direct biodiesel production from biomass through an acid-catalyzed transesterification reaction and a supercritical methanol transesterification reaction were evaluated. The highest oil-to-biodiesel conversion of 79

  5. The effects of low level chlorination and chlorine dioxide on biofouling control in a once-through service water system

    SciTech Connect

    Garrett, W.E. Jr.

    1995-06-01

    Continuous chlorination has been successfully used for the control of Corbicula at a nuclear power plant located on the Chattahoochee River in southeastern Alabama, since 1986. The purpose of this study was to investigate further minimization of chlorine usage and determine if chlorine dioxide is a feasible alternative. Four continuous biocide treatments were evaluated for macro and microfouling control effectiveness, operational feasibility, and environmental acceptability. One semi-continuous chlorination treatment was also evaluated for macrofouling control effectiveness. Higher treatment residuals were possible with chlorine dioxide than with chlorination due to the river discharge limitations. At the levels tested, continuous chlorine dioxide was significantly more effective in providing both macro and microfouling control. Semi-continuous chlorination was just as effective as continuous chlorination for controlling macrofouling. The Corbicula treatment programs that were tested should all provide sufficient control for zebra mussels. Chlorine dioxide was not as cost effective as chlorination for providing macrofouling control. The semi-continuous treatment save 50% on chemical usage and will allow for the simultaneous treatment of two service water systems. Chlorite levels produced during the chlorine dioxide treatments were found to be environmentally acceptable. Levels of trihalomethanes in the chlorinated service water were less than the maximum levels allowed in drinking water.

  6. Preparation of platinum modified titanium dioxide nanoparticles with the use of laser ablation in water.

    PubMed

    Siuzdak, K; Sawczak, M; Klein, M; Nowaczyk, G; Jurga, S; Cenian, A

    2014-08-01

    We report on the preparation method of nanocrystalline titanium dioxide modified with platinum by using nanosecond laser ablation in liquid (LAL). Titania in the form of anatase crystals has been prepared in a two-stage process. Initially, irradiation by laser beam of a titanium metal plate fixed in a glass container filled with deionized water was conducted. After that, the ablation process was continued, with the use of a platinum target placed in a freshly obtained titania colloid. In this work, characterization of the obtained nanoparticles, based on spectroscopic techniques--Raman, X-ray photoelectron and UV-vis reflectance spectroscopy--is given. High resolution transmission electron microscopy was used to describe particle morphology. On the basis of photocatalytic studies we observed the rate of degradation process of methylene blue (MB) (a model organic pollution) in the presence of Pt modified titania in comparison to pure TiO2--as a reference case. Physical and chemical mechanisms of the formation of platinum modified titania are also discussed here. Stable colloidal suspensions containing Pt modified titanium dioxide crystalline anatase particles show an almost perfect spherical shape with diameters ranging from 5 to 30 nm. The TiO2 nanoparticles decorated with platinum exhibit much higher (up to 30%) photocatalytic activity towards the degradation of MB under UV illumination than pure titania. PMID:24937772

  7. Carbon dioxide release from ocean thermal energy conversion (OTEC) cycles

    SciTech Connect

    Green, H.J. ); Guenther, P.R. )

    1990-09-01

    This paper presents the results of recent measurements of CO{sub 2} release from an open-cycle ocean thermal energy conversion (OTEC) experiment. Based on these data, the rate of short-term CO{sub 2} release from future open-cycle OTEC plants is projected to be 15 to 25 times smaller than that from fossil-fueled electric power plants. OTEC system that incorporate subsurface mixed discharge are expected to result in no long-term release. OTEC plants can significantly reduce CO{sub 2} emissions when substituted for fossil-fueled power generation. 12 refs., 4 figs., 3 tabs.

  8. Carbon dioxide partial pressure and carbon fluxes of air-water interface in Taihu Lake, China

    NASA Astrophysics Data System (ADS)

    Fan, Chengxin; Hu, Weiping; Ford, Phillip W.; Chen, Yuwei; Qu, Wenchuan; Zhang, Lu

    2005-03-01

    To obtain carbon dioxide (CO2) flux between water-air interface of Taihu lake, monthly water samplers at 14 sites and the local meteorological data of the lake were collected and analyzed in 1998. Carbon dioxide partial pressures (pCO2) at air-water interface in the lake were calculated using alkalinity, pH, ionic strength, active coefficient, and water temperature. The carbon fluxes at different sublakes and areas were estimated by concentration gradient between water and air in consideration of Schmidt numbers of 600 and daily mean windspeed at 10 m above water surface. The results indicated that the mean values of pCO2 in Wuli Lake, Meiliang Bay, hydrophyte area, west littoral zone, riverine mouths, and the open lake areas were 1 807.8±1 071.4 (mean±standard deviation) μatm (1atm=1.013 25×105Pa), 416.3±217.0 μatm, 576.5±758.8 μatm, 304.2±243.5 μatm, 1 933.6±1 144.7 μatm, and 448.5±202.6 μatm, respectively. Maximum and minimum pCO2 values were found in the hypertrophic (4 053.7 μatm) and the eutrophic (3.2 μatm) areas. The riverine mouth areas have the maximum fluxes (82.0±62.8 mmol/m2a). But there was no significant difference between eutrophic and mesotrophic areas in pCO2 and the flux of CO2. The hydrophyte area, however, has the minimum (-0.58±12.9 mmol/m2a). In respect to CO2 equilibrium, input of the rivers will obviously influence inorganic carbon distribution in the riverine estuary. For example, the annual mean CO2 flux in Zhihugang River estuary was 19 times of that in Meiliang Bay, although the former is only a part of the latter. The sites in the body of the lake show a clear seasonal cycle with pCO2 higher than atmospheric equilibrium in winter, and much lower than atmospheric in summer due to CO2 consumption by photosynthesis. The CO2 amount of the net annual evasion that enters the atmosphere is 28.42×104 t/a, of which those from the west littoral zone and the open lake account for 53.8% and 36.7%, respectively.

  9. Effect of surfactants on the interfacial tension and emulsion formation between water and carbon dioxide

    SciTech Connect

    Rocha, S.R.P. da; Harrison, K.L.; Johnston, K.P.

    1999-01-19

    The lowering of the interfacial tension ({gamma}) between water and carbon dioxide by various classes of surfactants is reported and used to interpret complementary measurements of the capacity, stability, and average drop size of water-in-CO{sub 2} emulsions. {gamma} is lowered from {approximately}20 to {approximately}2 mN/m for the best poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(propylene oxide) (PPO-b-PEO-b-PPO) and PeO-b-PPO-b-PEO Pluronic triblock copolymers, 1.4 mN/m for a poly(butylene oxide)-b-PEO copolymer, 0.8 mN/m for a perfluoropolyether (PEPE) ammonium carboxylate and 0.2 mN/m for PDMS{sub 24}-g-EO{sub 22}. The hydrophilic-CO{sub 2}-philic balance (HCB) of the triblock Pluronic and PDMS-g-PEO-PPO surfactants is characterized by the CO{sub 2}-to-water distribution coefficient and V-shaped plots of log {gamma} vs wt % EO. A minimum in {gamma} is observed for the optimum HCB. As the CO{sub 2}-philicity of the surfactant tail is increased, the molecular weight of the hydrophilic segment increases for an optimum HCB. The stronger interactions on both sides of the interface lead to a lower {gamma}. Consequently, more water was emulsified for the PDMS-based copolymers than either the PPO- or PBO-based copolymers.

  10. Lifetime Prediction of Polyethylene Pipes Transporting Drinking Water in the Presence of Chlorine Dioxide

    NASA Astrophysics Data System (ADS)

    Colin, X.; Audouin, L.; Verdu, J.

    2008-08-01

    A kinetic model for lifetime prediction of polyethylene pipes transporting pressurized water disinfected by chlorine dioxide (DOC) has been elaborated. This model is composed of three sub-models: —A system of differential equations, derived from a realistic mechanistic scheme for radical chain oxidation in the presence of DOC of stabilized polyethylene (PE), giving access to the spatial distribution of structural changes in the pipe wall and its evolution against time of exposure; —The classical Saito's equation to predict the profiles of average molar masses from the spatial distribution of chain scissions and crosslinking events; —An empirical creep equation and an empirical fracture criterion derived from regression curves obtained in pure water. It is assumed that chemical degradation modifies only the time to transition tc between ductile and brittle regimes of failure, and that tc is linked to the weight average molar mass by a power law. By combining these three sub-models, it is possible to predict the time to failure tF under the coupled effects of pressure and chemical degradation. In current use conditions (under 3-12 bars water pressure, at 15 °C, in the presence of 0.15 mg of DOC per liter of water), the model predicts a tF of the order of 15 years against more than 50 years expected lifetime, that agrees well with experimental results.

  11. Energy expenditure in space flight (doubly labelled water method) (8-IML-1)

    NASA Technical Reports Server (NTRS)

    Parsons, Howard G.

    1992-01-01

    The objective of the Energy Expenditure in Space Flight (ESS) experiment is to demonstrate and evaluate the doubly labeled water method of measuring the energy expended by crew members during approximately 7 days in microgravity. The doubly labeled water technique determines carbon dioxide production which is then used to calculate energy expenditure. The method relies on the equilibrium between oxygen in respiratory carbon dioxide and oxygen in body water. Because of this equilibrium, the kinetic of water turnover and respiration are interdependent. Under normal conditions, man contains small but significant amounts of deuterium and oxygen 18. Deuterium is eliminated from the body as water while oxygen 18 is eliminated as water and carbon dioxide. The difference in the turnover rates in the two isotopes is proportional to the carbon dioxide production. Deliberately enriching the total body water with both of these isotopes allows the isotope turnovers to be accurately measured in urine, plasma, or saliva samples. The samples are taken to the laboratory for analysis using an ion-ratio spectrometer.

  12. Effects of carbon dioxide, water supply, and seasonality on terpene content and emission by Rosmarinus officinalis

    SciTech Connect

    Penuelas, J.; Llusia, J.

    1997-04-01

    Rosmarinus officinalis L. plants were grown under carbon dioxide concentrations of 350 and 700 {mu}mol (atmospheric CO{sub 2} and elevated CO{sub 2}) and under two levels of irrigation (high water and low water) from October 1, 1994 to May 31, 1996. Elevated CO{sub 2} led on increasingly larger monthly growth rates than the atmospheric CO{sub 2} treatments. The increase was 9.5% in spring 1995, 23% in summer 1995, and 53% in spring 1996 in the high-water treatments, whereas in low-water treatments the growth response to elevated CO{sub 2} was constrained until the second year spring, when there was a 47% increase. The terpene concentrations was slightly larger in the elevated CO{sub 2} treatments than in atmospheric CO{sub 2} treatments and reached a maximum 37% difference in spring 1996. There was no significant effect of water treatment, likely as a result of a mild low water treatment for a Mediterranean plant. Terpene concentrations increased throughout the period of study, indicating possible age effects. The most abundant terpenes were {alpha}-pinene, cineole, camphor, borneol, and verbenone, which represented about 75% of the total. No significant differences were found in the terpene composition of the plants in the different treatments or seasons. The emission of volatile terpenes was much larger in spring (about 75 {mu}g/dry wt/hr) than in autumn (about 10 {mu}g/dry wt/hr), partly because of higher temperature and partly because of seasonal effect, but no significant differences was found because of CO{sub 2} or water treatment. The main terpene emitted was {alpha}-pinene, which represented about 50% of the total. There was no clear correlation between content and emission, either quantitatively or qualitatively. More volatile terpenes were proportionally more important in the total emission than in total content and in autumn than in spring.

  13. Benzothiazole Sulfinate: a Water-Soluble and Slow-Releasing Sulfur Dioxide Donor.

    PubMed

    Day, Jacob J; Yang, Zhenhua; Chen, Wei; Pacheco, Armando; Xian, Ming

    2016-06-17

    Sulfur dioxide (SO2) has long been considered a toxic environmental pollutant and byproduct of industrial processing. Recently it has become evident that SO2 may also have regulatory functions in mammalian pulmonary systems. However, the study of these effects has proven to be challenging due to the difficulty in administering SO2 in a reliable manner. In this work, we report the discovery of a new pH-dependent and water-soluble SO2 donor, benzothiazole sulfinate (BTS). We have found BTS to have slow and sustained SO2 release at physiological pH. Additionally, we have explored its vasorelaxation properties as compared to the authentic SO2 gas solutions. The slow release of BTS should make it a useful tool for the study of endogenously generated SO2. PMID:27031093

  14. Algal competition in a water column with excessive dioxide in the atmosphere.

    PubMed

    Nie, Hua; Hsu, Sze-Bi; Grover, J P

    2016-06-01

    This paper deals with a resource competition model of two algal species in a water column with excessive dioxide in the atmosphere. First, the uniqueness of positive steady state solutions to the single-species model with two resources is established by the application of the degree theory and the strong maximum principle for the cooperative system. Second, some asymptotic behavior of the single-species model is given by comparison principle and uniform persistence theory. Third, the coexistence solutions to the competition system of two species with two substitutable resources are obtained by global bifurcation theory, various estimates and the strong maximum principle for the cooperative system. Numerical simulations are used to illustrate the outcomes of coexistence and competitive exclusion. PMID:26349941

  15. A new method of applying a controlled soil water stress, and its effect on the growth of cotton and soybean seedlings at ambient and elevated carbon dioxide

    Technology Transfer Automated Retrieval System (TEKTRAN)

    While numerous studies have shown that elevated carbon dioxide can delay soil water depletion by causing partial stomatal closure, few studies have compared responses of plant growth to the same soil water deficits imposed at ambient and elevated carbon dioxide. We applied a vacuum to ceramic cups ...

  16. THERMODYNAMIC ANALYSIS OF AMMONIA-WATER-CARBON DIOXIDE MIXTURES FOR DESIGNING NEW POWER GENERATION CYCLES

    SciTech Connect

    Ashish Gupta

    2003-01-15

    This project was undertaken with the goal of developing a computational package for the thermodynamic properties of ammonia-water-carbon dioxide mixtures at elevated temperature and pressure conditions. This objective was accomplished by modifying an existing set of empirical equations of state for ammonia-water mixtures. This involved using the Wagner equation of state for the gas phase properties of carbon dioxide. In the liquid phase, Pitzer's ionic model was used. The implementation of this approach in the form of a computation package that can be used for the optimization of power cycles required additional code development. In particular, this thermodynamic model consisted of a large set of non-linear equations. Consequently, in the interest of computational speed and robustness that is required when applied to optimization problems, analytic gradients were incorporated in the Newton solver routines. The equations were then implemented using a stream property predictor to make initial guesses of the composition, temperature, pressure, enthalpy, entropy, etc. near a known state. The predictor's validity is then tested upon the convergence of an iteration. It proved difficult to obtain experimental data from the literature that could be used to test the accuracy of the new thermodynamic property package, and this remains a critical need for future efforts in the area. It was possible, however, to assess the feasibility of using this complicated property prediction package for power cycle design and optimization. Such feasibility was first demonstrated by modification of our Kalina cycle optimization code to use the package with either a deterministic optimizer, MINOS, or a stochastic optimizer using differential evolution, a genetic-algorithm-based technique. Beyond this feasibility demonstration, a new approach to the design and optimization of power cycles was developed using a graph theoretic approach.

  17. Application of Vacuum Swing Adsorption for Carbon Dioxide and Water Vapor Removal from Manned Spacecraft Atmospheres

    NASA Technical Reports Server (NTRS)

    Knox, J.; Howard, D.

    2007-01-01

    In NASA's Vision for Space Exploration (Bush, 2004), (Griffin, 2007), humans will once again travel beyond the confines of earth's gravity, this time to remain there for extended periods. These forays will place unprecedented demands on launch systems. They must not only blast out of earth's gravity well as during the Apollo moon missions, but also liftoff the supplies needed to sustain a larger crew over much longer periods. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. For short-term phases of manned space exploration, such as transit from the earth to the moon, venting of metabolic carbon dioxide and water to space is more efficient than the inclusion of large recycling systems on the spacecraft. The baseline system for the Orion spacecraft is an amine-based vacuum swing system (Smith, Perry et aI., 2006). As part of the development of an alternative approach, a sorbent-based CO2 and H2O removal system (Knox, Adams et aI., 2006), subscale testing was conducted to evaluate potential performance improvements obtainable by recuperating the heat of adsorption to aid in vacuum desorption. This bed design is shown in Figure 1, is depicted here with a lattice structure instead of reticulated foam for heat transfer. The slot widths are approximately 1.2 mm wide and 8.5 mm long. Bed depth is approximately 4.7 mm. Headers (not shown) were produced by the stereo lithography apparatus at MSFC.

  18. Coupling geothermal energy capture with carbon dioxide sequestration in permeable, porous geologic formations I: Overview and discussion

    NASA Astrophysics Data System (ADS)

    Saar, M. O.; Randolph, J. B.

    2009-12-01

    Carbon dioxide (CO2) sequestration in deep saline aquifers and exhausted oil fields has been widely considered as a means for reducing CO2 emissions to the atmosphere as a counter-measure to global warming. However, rather than treating CO2 as a waste fluid in need of permanent disposal, it could additionally be used as a working fluid in geothermal energy capture as its thermodynamic properties suggest it transfers heat more efficiently than water. Therefore, using CO2 as the working fluid in geothermal power systems may permit more widespread utilization of geothermal energy, whether regional geothermal temperatures and heat flow rates are low, intermediate, or high. In addition, CO2 emissions from electricity production are reduced through both geologic CO2 sequestration and displacement of hydrocarbon fuels via use of renewable geothermal energy. Furthermore, geothermal power plants are quite scalable and can provide both on-demand peak and base-load power. Here, we discuss the merits and limitations of a CO2-based geothermal system and present results of early-stage calculations regarding geothermal power plant efficiencies and energy production rates when CO2, rather than water, is used as a working fluid.

  19. Absorption removal of sulfur dioxide by falling water droplets in the presence of inert solid particles

    NASA Astrophysics Data System (ADS)

    Liu, I.-Hung; Chang, Ching-Yuan; Liu, Su-Chin; Chang, I.-Cheng; Shih, Shin-Min

    An experimental analysis of the absorption removal of sulfur dioxide by the free falling water droplets containing the inert solid particles is presented. The wheat flour powder is introduced as the inert solid particles. Tests with and without the flour powder in the water droplets are examined. The mass fluxes and mass transfer coefficients of SO 2 for the cases with and without the flour powder are compared to elucidate the effects of the inert solid particles contained in the water droplets on the gas absorption. The results indicate aignificant difference between the two cases for the concentrations of the flour powder in the absorbent droplets ( Cs) within the ranges of the experimental conditions, namely 0.1 to 10 wt% flour powder in the absorbent droplets. In general, the inert solid particles of the flour powder as the impurities in the water droplets tend to decrease the SO 2 absorption rate for the experimental absorption system under investigation. Various values of Cs cause various levels of the interfacial resistance and affect the gas absorption rate. The interfacial resistance is recognized by introducing an interfacial mass transfer coefficient ks with its reciprocal being proportional to the magnitude of the interfacial resistance. The values of 1/ ks may be computed by the use of the equation 1/ ks=(1/ KOLs-1/ KOL), where KOLs and KOL are the overall liquid-phase mass transfer coefficients with and without the inert solid particles, respectively. The values of ks with Cs of 0.1 to 10 wt% are about 0.295-0.032 cms -1 for absorbing 1000-3000 ppmv SO 2 with the water droplets. This kind of information is useful for the SO 2 removal and the information of acid rain that the impurities of the inert solid particles contaminate the water droplets.

  20. Interaction of carbon dioxide enrichment and soil moisture on photosynthesis, transpiration, and water use efficiency of soybean

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soybean (Glycine max (L.) Merrill) is one of the most important oil and protein sources in the world. Interactive effect of elevated carbon dioxide (CO2) and soil water availability will have the potential impact on crops and future food security of the world under climate change scenario. A rhizotr...

  1. Carbon dioxide and water vapour exchange in a tropical dry forest as influenced by the North American Monsoon System (NAMS)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    To better understand the effects and relationship between precipitation, net ecosystem carbon dioxide (NEE) and water vapor exchange (ET), we report a study conducted in the tropical dry forest (TDF) in the northwest of Mexico. Ecosystem gas exchange was measured using the eddy correlation technique...

  2. The effects of carbon dioxide on performance and histopathology of rainbow trout Oncorhynchus mykiss in water recirculation aquaculture systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Chronic exposure to elevated levels of dissolved carbon dioxide (CO2) has been linked to reduced growth, physiological disturbances and negative health outcomes in intensively reared fish. Although pumping to a degassing tower can lower concentrations of dissolved CO2 in water recirculation aquacult...

  3. Extraction of Sudan dyes from environmental water by hemimicelles-based magnetic titanium dioxide nanoparticles.

    PubMed

    Li, Chenyu; Chen, Ligang; You, Xiaoxiao

    2014-11-01

    A novel method for the extraction of Sudan dyes including Sudan I, II, III, and IV from environmental water by magnetic titanium dioxide nanoparticles (Fe3O4@TiO2) coated with sodium dodecylsulfate (SDS) as adsorbent was reported. Fe3O4@TiO2 was synthesized by a simple method and was characterized by transmission electron microscopy, Fourier-transform infrared spectrometry, and vibrating sample magnetometer. The magnetic separation was quite efficient for the adsorption and desorption of Sudan dyes. The effect of the amount of SDS, extraction time, pH, desorption condition, maximal extraction volume, and humic acid on the extraction process were investigated. This method was employed to analyze three environmental water samples. The results demonstrated that our proposed method had wide linear range (25-5,000 ng L(-1)) with a good linearity (R (2) > 0.999) and low detection limits (2.9-7.3 ng L(-1)). An enrichment factor of 1,000 was achieved. In all three spiked levels (25, 250, and 2,500 ng L(-1)), the recoveries of Sudan dyes were in the range of 86.9-93.6 %. The relative standard deviations obtained were ranging from 2.5 to 9.3 %. That is to say, the new method was fast and effective for the extraction of Sudan dye from environmental water. PMID:24938811

  4. Solubilities of carbon dioxide and water in rhyolitic melt at 850 C and 750 bars

    NASA Technical Reports Server (NTRS)

    Blank, J. G.; Stloper, E. M.; Carroll, M. R.

    1993-01-01

    Concentrations of carbon dioxide and water dissolved in glasses quenched from rhyolitic melts equilibrated with H2O-CO2 fluids at 850 C and 750 bar were measured using IR spectroscopy; concentrations of H2O and CO2 in the quenched fluids were measured manometrically. The mole fraction of CO2 in the quenched fluid ranged from 0.06 to 0.91. Concentrations of CO2 in the coexisting rhyolitic melt increased from 23(+/-6) ppm for the sample equilibrated with the most CO2-poor fluid to 515(+/-16) ppm for that equilibrated with the most CO2-rich fluid. The water content of the melt varied from 0.51(+/-0.06) to 3.34(+/-0.08) wt pct. Our results show that concentrations of molecular CO2 and H2O in the glasses obey Henry's Law; the mole fractions of molecular CO2 and molecular H2O in the quenched melts are proportional to their fugacities in the coexisting vapor. CO2 contents of vapor-saturated melts are not enhanced by addition of water to CO2-rich vapor, contrary to previous reports for silicate melts at higher pressures. The Henrian behavior of CO2 and H2O at low pressure considerably simplifies modeling of the degassing of silicic magmas.

  5. Density functional studies of the formation of nitrous acid from the reaction of nitrogen dioxide and water vapor

    SciTech Connect

    Chou, A.; Li, Z.; Tao, F.M.

    1999-09-30

    Nitrous acid (HONO) has long been recognized as an important trace gas in the troposphere where its rapid photolysis represents a significant source of hydroxy (OH) radicals. During the night, HONO has been observed to accumulate to concentrations up to 15 ppb, and this accumulation of HONO has a profound impact on the daytime chemistry of the troposphere. Reaction mechanisms for the production of nitrous acid (HONO ) from the homogeneous gas-phase hydrolysis of nitrogen dioxide (NO{sub 2}) are examined by density functional theory calculations. The molecular structures and energies of the NO{sub 2}-(H{sub 2}O){sub n} (n = 1, 2, 3) and N{sub 2}O{sub 4}-(H{sub 2} O){sub n}(n = 1, 2) systems corresponding to the stationary points on the potential energy surface along the reaction pathways are calculated using the B3LYP method with the 6-311+G(2d,p) basis set. These reaction pathways represent the homogeneous hydrolysis of NO{sub 2} or N{sub 2}O{sub 4} with a varying number of water (H{sub 2}O) molecules. The reactions of NO{sub 2} with water produce HONO, along with the OH radical which was postulated to combine in the next step with a second NO{sub 2} to form nitric acid (HNO{sub 3}). The simple NO{sub 2} + H{sub 2}O bimolecular reaction leads to the highly unstable OH radical which reacts reversibly with HONO without an energy barrier. The introduction of single solvating H{sub 2}O molecule appears to stabilize the transition state as well as an intermediate that contains the OH radical. However, the energy barrier is found to be near 30 kcal mol{sup {minus}1} and is not affected by multiple additional H{sub 2}O molecules. On the other hand, the reaction of N{sub 2}O{sub 4} with water lead directly to HONO and HNO{sub 3}. the energy barrier for the N{sub 2}O{sub 4} reaction is above 30 kcal mol{sup {minus}1} and is also unaffected by additional H{sub 2}O molecules. The study demonstrates that the gas-phase hydrolysis of NO{sub 2} or N{sub 2}O{sub 4} is

  6. Free energies of carbon dioxide sequestration and methane recovery in clathrate hydrates

    NASA Astrophysics Data System (ADS)

    Dornan, Peter; Alavi, Saman; Woo, T. K.

    2007-09-01

    Classical molecular dynamics simulations are used to compare the stability of methane, carbon dioxide, nitrogen, and mixed CO2/N2 structure I (sI) clathrates under deep ocean seafloor temperature and pressure conditions (275K and 30MPa) which were considered suitable for CO2 sequestration. Substitution of methane guests in both the small and large sI cages by CO2 and N2 fluids are considered separately to determine the separate contributions to the overall free energy of substitution. The structure I clathrate with methane in small cages and carbon dioxide in large cages is determined to be the most stable. Substitutions of methane in the small cages with CO2 and N2 have positive free energies. Substitution of methane with CO2 in the large cages has a large negative free energy and substitution of the methane in the large cages with N2 has a small positive free energy. The calculations show that under conditions where storage is being considered, carbon dioxide spontaneously replaces methane from sI clathrates, causing the release of methane. This process must be considered if there are methane clathrates present where CO2 sequestration is to be attempted. The calculations also indicate that N2 does not directly compete with CO2 during methane substitution or clathrate formation and therefore can be used as a carrier gas or may be present as an impurity. Simulations further reveal that the replacement of methane with CO2 in structure II (sII) cages also has a negative free energy. In cases where sII CO2 clathrates are formed, only single occupancy of the large cages will be observed.

  7. Causal nexus between energy consumption and carbon dioxide emission for Malaysia using maximum entropy bootstrap approach.

    PubMed

    Gul, Sehrish; Zou, Xiang; Hassan, Che Hashim; Azam, Muhammad; Zaman, Khalid

    2015-12-01

    This study investigates the relationship between energy consumption and carbon dioxide emission in the causal framework, as the direction of causality remains has a significant policy implication for developed and developing countries. The study employed maximum entropy bootstrap (Meboot) approach to examine the causal nexus between energy consumption and carbon dioxide emission using bivariate as well as multivariate framework for Malaysia, over a period of 1975-2013. This is a unified approach without requiring the use of conventional techniques based on asymptotical theory such as testing for possible unit root and cointegration. In addition, it can be applied in the presence of non-stationary of any type including structural breaks without any type of data transformation to achieve stationary. Thus, it provides more reliable and robust inferences which are insensitive to time span as well as lag length used. The empirical results show that there is a unidirectional causality running from energy consumption to carbon emission both in the bivariate model and multivariate framework, while controlling for broad money supply and population density. The results indicate that Malaysia is an energy-dependent country and hence energy is stimulus to carbon emissions. PMID:26282441

  8. Photoinduced conversion of carbon dioxide and water molecules to methanol on the surface of molybdenum oxide MoO x ( x < 2)

    NASA Astrophysics Data System (ADS)

    Silaev, I. V.; Khubezhov, S. A.; Ramonova, A. G.; Grigorkina, G. S.; Kaloeva, A. G.; Demeev, Z. S.; Bliev, A. P.; Sekiba, D.; Ogura, S.; Fukutani, K.; Magkoev, T. T.

    2016-03-01

    X-ray and UV photoelectron spectroscopic data are used to demonstrate that, when pulsed laser light with a photon energy of 6.4 eV acts on the surface of nonstoichiometric molybdenum oxide MoO x ( x < 2), methanol is effectively formed from adsorbed molecules of carbon dioxide and water. The processes in which CO2 and H2O molecules are adsorbed on substrate surface defects and their bonds are activated, enhanced under the effect of photons, should be regarded as the key factors.

  9. Water, energy, and farm production

    SciTech Connect

    Ulibarri, C.A.; Seely, H.S.; Willis, D.B.; Anderson, D.M.

    1996-04-01

    Electric utility rate deregulation can have disproportionate impacts on water-intensive crops, which have historically relied upon pressurized irrigation technologies and surface water resources. Based on a case study of agricultural growers in southern California, the paper models the impacts of utility rates considered in the Western Area Power Administration`s Sierra Nevada Customer Service Region. The study was performed as part of the 2004 Power Marketing Program Draft Environmental Impact Statement. The empirical results reflect linear-programming estimates of the income transfers from growers to energy providers based on county-wide coverage of 13 junior and senior irrigation districts and short-run production possibilities of 11 irrigated crops. Transfers of income from growers to energy suppliers occur through their losses in producer surplus.

  10. The Streaming Potential Coupling Coefficient of Liquid Carbon Dioxide Injected Into Water Saturated Berea Sandstone

    NASA Astrophysics Data System (ADS)

    Moore, J. R.; Glaser, S. D.; Morrison, H. F.

    2003-12-01

    The streaming potential coupling coefficient was determined for a liquid carbon dioxide flood of a water-saturated sample of Berea sandstone. The coupling coefficient for the rock/water case was determined both before and after each CO2 flood of three samples using a low-pressure static head method. Next, liquid CO2 was allowed to flow through each sample. As the CO2 displaced the water the coupling coefficient decreased. At longer times, when all mobile pore water was displaced, the coupling coefficient maintained a steady state, and was lower than that for water by about 10 times. The results of this testing reveal a coupling coefficient of 30 mV/0.1MPa, for 125 Ohm-m water flow through the sample, and 3.0 mV / 0.1 MPa for liquid CO2 flow. Calculated zeta potentials are -3.4 mV using water as the pore fluid and -1.7 x 10-6 mV for liquid CO2. We propose that the lower coupling coefficient for CO2 flow is primarily a result of changes in zeta potential, since changes in pore fluid resistivity and viscosity would act to increase the coupling coefficient. Zeta potential for the liquid CO2 / mineral interface is a function of the low polarity and lack of mobile ions associated with liquid CO2. We find no anomalous 2-phase liquid/gas effects, which may have augmented single-phase streaming potentials by many times. We propose that although CO2 gas may have been present for some of the higher pressure drop events, the low gas fraction (or quality) of the two-phase mixture did not lead to any significant anomalous or augmented observations. Implications of this work include spatial and temporal monitoring of CO2 injectate in subsurface reservoirs and the identification of flow paths, with the recommendation being to attempt to image the advancing CO2/water front, where the coupling coefficient is higher.

  11. DESIGN OF HYBRID POWER GENERATION CYCLES EMPLOYING AMMONIA-WATER-CARBON DIOXIDE MIXTURES

    SciTech Connect

    Ashish Gupta

    2002-06-01

    A power cycle generates electricity from the heat of combustion of fossil fuels. Its efficiency is governed by the cycle configuration, the operating parameters, and the working fluid. Typical. designs use pure water as the fluid. in the last two decades, hybrid cycles based on ammonia-water, and carbon-dioxide mixtures as the working fluid have been proposed. These cycles may improve the power generation efficiency of Rankine cycles by 15%. Improved efficiency is important for two reasons: it lowers the cost of electricity being produced, and by reducing the consumption of fossil fuels per unit power, it reduces the generation of environmental pollutants. The goal of this project is to develop a computational optimization-based method for the design and analysis of hybrid bottoming power cycles to minimize the usage of fossil fuels. The development of this methodology has been achieved by formulating this task as that of selecting the least cost power cycle design from all possible configurations. They employ a detailed thermodynamic property prediction package they have developed under a DOE-FETC grant to model working fluid mixtures. Preliminary results from this work suggest that a pure NH{sub 3} cycle outperforms steam or the expensive Kalina cycle.

  12. SYNTHESIS OF SULFUR-BASED WATER TREATMENT AGENT FROM SULFUR DIOXIDE WASTE STREAMS

    SciTech Connect

    Robert C. Brown; Maohong Fan; Adrienne Cooper

    2002-10-01

    Absorption of sulfur dioxide from a simulated flue gas was investigated for the production of polymeric ferric sulfate (PFS), a highly effective coagulant useful in treatment of drinking water and wastewater. The reaction for PFS synthesis took place near atmospheric pressure and at temperatures of 30-80 C. SO{sub 2} removal efficiencies greater than 90% were achieved, with ferrous iron concentrations in the product less than 0.1%. A factorial analysis of the effect of temperature, oxidant dosage, SO{sub 2} concentration, and gas flow rate on SO{sub 2} removal efficiency was carried out, and statistical analyses are conducted. The solid PFS was also characterized with different methods. Characterization results have shown that PFS possesses both crystalline and non-crystalline structure. The kinetics of reactions among FeSO{sub 4} {center_dot} 7H{sub 2}O, NaHSO{sub 3} and NaClO{sub 3} was investigated. The PFS product was used in pilot-scale tests at a municipal water treatment facility and gave good results in removal of turbidity and superior results in removal of disinfection byproduct precursors (TOC, DOC, UV-254) when compared with equal doses of ferric chloride.

  13. Chlorine dioxide as a treatment for ballast water to control invasive species: shipboard testing.

    PubMed

    Maranda, Lucie; Cox, Annie M; Campbell, Robert G; Smith, David C

    2013-10-15

    The efficacy of chlorine dioxide (ClO2) in eliminating organisms present in estuarine ballast water of a containership was determined under actual operating conditions by comparing the survival of planktonic communities present in waters of treated and control ballast tanks. Sampling was via ballast-tank hatches. The treatment (5 mg L(-1)ClO2 without pre-filtration) delivered by a prototype ClO2-generating system was generally effective against planktonic assemblages, although bacterial communities rebounded after a few days. Regardless of temperature, ClO2 was very effective against phytoplankton; the effect was immediate, without resurgence. Some zooplankters in the ≥ 50-μm fraction may survive the biocide, especially those able to find refuge within a protective coating (e.g., cysts, resting eggs, and shells) or in sediment. In order to boost efficacy, a pre-filtration step is recommended (now installed as standard equipment) to lower the intake of the ≥ 50-μm fraction and lessen the challenge posed by this size class. PMID:23987094

  14. Extreme carbon dioxide concentrations in acidic pit lakes provoked by water/rock interaction.

    PubMed

    Sánchez-España, Javier; Boehrer, Bertram; Yusta, Iñaki

    2014-04-15

    We quantify the gas pressure and concentration of a gas-charged acidic pit lake in SW Spain. We measured total dissolved gas pressure, carbon dioxide (CO2) concentration, major ion concentration, isotopic composition of dissolved inorganic carbon (δ(13)C(DIC)), and other physicochemical parameters. CO2 is the dominant dissolved gas in this lake and results mainly from carbonate dissolution during the interaction of acidic water with wall rocks, followed by diffusive and advective transport through the water column. The δ(13)C(DIC) values suggest that the biological contribution is comparatively small. Maximum CO2 concentrations higher than 0.1 M (∼5000 mg/L) have been measured, which are only comparable to those found in volcanic crater lakes. The corresponding gas pressures of CO2 alone (pCO2 ∼3.6 bar) imply 60% saturation relative to local pressure at 50 m depth. High CO2 concentrations have been observed in other pit lakes of the region. We recommend gas-specific monitoring in acidic pit lakes and, if necessary, the design of feasible degassing strategies. PMID:24628479

  15. [Measurements of "Total Water" and Carbon Dioxide from the NASA WB-57 During Crystal-Face

    NASA Technical Reports Server (NTRS)

    Avallone, Linnea M.

    2003-01-01

    An existing closed-path tunable diode laser hygrometer (CLH) was employed for the measurements of total water made during CRYSTAL-FACE. This instrument had flown previously on the NASA DC-8 during the SAGE III Ozone Loss and Validation Experiment (SOLVE) and also on the NCAR C-130 during some local flights designed to test the extent of water vapor interference in carbon dioxide measurements. The instrument was largely unchanged from previous studies, but a new inlet appropriate to the WB-57F wingpod was constructed. In order to minimize the impact on the over-subscribed right wingpod and to achieve good thermal control of the inlet temperature, the CLH inlet was made of carbon-fiber/epoxy composite. Considerable effort was spent to design and build the lightest possible mounting hardware and design relatively low-power inlet heaters. As a result, the instrument and mounting hardware came in below the NASA/JSC-imposed weight cap of 35 lbs. Data were obtained on all test flights during May 2002 and during all but one mission flight in July 2002 (the one lost flight was due to an unplugged instrument power cable). Instrument performance during the test flights was good, but the data are not science- quality, as a variety of tests were performed to optimize the inlet configuration and heating. Data on all mission flights is of high quality, despite some difficulties caused by flying through wet low-altitude air masses and dense anvils, which saturated the instrument response.

  16. Removal of arsenic from ground water by manganese dioxide-coated sand

    SciTech Connect

    Bajpai, S.; Chaudhuri, M.

    1999-08-01

    In a laboratory study, manganese dioxide-coated sand (MDCS), prepared by reacting potassium permanganate with manganese chloride under an alkaline condition and in the presence of sand, showed promise as a medium for use in small systems or home-treatment units in developing areas of the world, for removing arsenic(III) and arsenic(V) from ground water. In ten cycles of downflow column tests [bed depth 400 mm; empty-bed contact time 74 min; influent arsenic 0.5 mg As/L of arsenic(III) and 0.5 mg As/L of arsenic(V)], breakthrough bed volumes at the World Health Organization guideline value of 0.01 mg As/L for arsenic in drinking water were in the range of 153--185 per cycle. During regeneration (backwashing with 2 L of a 0.2 N sodium hydroxide solution), 85.0% of the removed arsenic was recovered in the first cycle, and 94.6--98.3% was recovered in subsequent cycles. A low-cost, simple home arsenic removal unit, containing 6 kg (4 L) of the MDCS medium and operated at 6 L/h, produced 740 and 700 L of water in two cycles of runs when the influent arsenic concentration was 0.5 mg As/L of arsenic(III) and 0.5 mg As/L of arsenic(V). No arsenic(III) or leaching of manganese from the medium was detected in the effluent. A detailed study addressing the effects of some important factors (water pH, concentration and type of competing anions, and cations) on the process is needed. The home arsenic removal unit should be subjected to field trials to assess the long-term effects on performance.

  17. Thorium dioxide: properties and nuclear applications

    SciTech Connect

    Belle, J.; Berman, R.M.

    1984-01-01

    This is the sixth book on reactor materials published under sponsorship of the Naval Reactors Office of the United States Department of Energy, formerly the United States Atomic Energy Commission. This book presents a comprehensive compilation of the most significant properties of thorium dioxide, much like the book Uranium Dioxide: Properties and Nuclear Applications presented information on the fuel material used in the Shippingport Pressurized Water Reactor core.

  18. Carbon dioxide enrichment restrains the impact of drought on three maize hybrids differing in water stress tolerance in water stressed environments

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Three maize genotypes, differing in drought tolerance, were grown in controlled environment chambers using either ambient (38 Pa) or elevated (70 Pa) carbon dioxide. Water stress treatments were imposed on one half the plants beginning 17 days after sowing. Shoot DW of the drought tolerant hybrid ...

  19. Underground coal gasification with integrated carbon dioxide mitigation supports Bulgaria's low carbon energy supply

    NASA Astrophysics Data System (ADS)

    Nakaten, Natalie; Kempka, Thomas; Azzam, Rafig

    2013-04-01

    Underground coal gasification allows for the utilisation of coal reserves that are economically not exploitable due to complex geological boundary conditions. The present study investigates underground coal gasification as a potential economic approach for conversion of deep-seated coals into a high-calorific synthesis gas to support the Bulgarian energy system. Coupling of underground coal gasification providing synthesis gas to fuel a combined cycle gas turbine with carbon capture and storage is considered to provide substantial benefits in supporting the Bulgarian energy system with a competitive source of energy. In addition, underground voids originating from coal consumption increase the potential for geological storage of carbon dioxide resulting from the coupled process of energy production. Cost-effectiveness, energy consumption and carbon dioxide emissions of this coupled process are investigated by application of a techno-economic model specifically developed for that purpose. Capital (CAPEX) and operational expenditure (OPEX) are derived from calculations using six dynamic sub-models describing the entire coupled process and aiming at determination of the levelised costs of electricity generation (COE). The techno-economic model is embedded into an energy system-modelling framework to determine the potential integration of the introduced low carbon energy production technology into the Bulgarian energy system and its competitiveness at the energy market. For that purpose, boundary conditions resulting from geological settings as well as those determined by the Bulgarian energy system and its foreseeable future development have to be considered in the energy system-modelling framework. These tasks comprise integration of the present infrastructure of the Bulgarian energy production and transport system. Hereby, the knowledge on the existing power plant stock and its scheduled future development are of uttermost importance, since only phasing-out power

  20. Seasonal and Diurnal Fluxes of Radiation, Heat, Water Vapor, and Carbon Dioxide over a Suburban Area.

    NASA Astrophysics Data System (ADS)

    Moriwaki, R.; Kanda, M.

    2004-11-01

    Based on 1 yr of field measurements, the diurnal, seasonal, and annual fluxes of energy and carbon dioxide (CO2) at a residential area of Tokyo, Japan, are described. The major findings are as follows. 1) The storage heat flux G in the daytime had little seasonal variation, irrespective of significant seasonal change of net all-wave radiation Rn. 2) The latent heat flux in the summer daytime was large despite the small areal fraction of natural coverage (trees and bare soil). The estimated local latent heat flux per unit natural coverage was 2 times the available energy (Rn - G), which indicates that the “oasis effect” was significant. 3) The CO2 flux was always upward throughout the year and the magnitude was larger in winter, mainly because of an increase of fossil fuel consumption. The annual total CO2 flux was 6 times the downward CO2 flux at a typical temperate deciduous forest.


  1. Plant extract-mediated biogenic synthesis of silver, manganese dioxide, silver-doped manganese dioxide nanoparticles and their antibacterial activity against food- and water-borne pathogens.

    PubMed

    Krishnaraj, Chandran; Ji, Byoung-Jun; Harper, Stacey L; Yun, Soon-Il

    2016-05-01

    Silver nanoparticles (AgNPs), manganese dioxide nanoparticles (MnO₂NPs) and silver-doped manganese dioxide nanoparticles (Ag-doped MnO₂NPs) were synthesized by simultaneous green chemistry reduction approach. Aqueous extract from the leaves of medicinally important plant Cucurbita pepo was used as reducing and capping agents. Various characterization techniques were carried out to affirm the formation of nanoparticles. HR-TEM analysis confirmed the size of nanoparticles in the range of 15-70 nm and also metal doping was confirmed through XRD and EDS analyses. FT-IR analysis confirmed that the presence of biomolecules in the aqueous leaves extract was responsible for nanoparticles synthesis. Further, the concentration of metals and their doping in the reaction mixture was achieved by ICP-MS. The growth curve and well diffusion study of synthesized nanoparticles were performed against food- and water-borne Gram-positive and Gram-negative bacterial pathogens. The mode of interaction of nanoparticles on bacterial cells was demonstrated through Bio-TEM analysis. Interestingly, AgNPs and Ag-doped MnO₂NPs showed better antibacterial activity against all the tested bacterial pathogens; however, MnO₂NPs alone did not show any antibacterial properties. Hence, AgNPs and Ag-doped MnO₂NPs synthesized from aqueous plant leaves extract may have important role in controlling various food spoilage caused by bacteria. PMID:26857369

  2. Laboratory Investigations in Support of Carbon Dioxide-in-Water Emulsions Stabilized by Fine Particles for Ocean and Geologic Sequestration of Carbon Dioxide

    SciTech Connect

    Dan Golomb; David Ryan; Eugene Barry

    2007-01-08

    Since the submission of our last Semi-annual Report, dated September 2006, the research objectives of this Co-operative Agreement shifted toward geologic sequestration of carbon dioxide. In the period September 2006-February 2007, experiments were conducted in a High-Pressure Batch Reactor (HPBR) for creating emulsions of liquid carbon dioxide (/CO{sub 2})-in-water stabilized by fine particles for geologic sequestration of CO{sub 2}. Also, emulsions were created in water of a binary mixture of liquid carbon dioxide and liquid hydrogen sulfide (/H{sub 2}S), called Acid Gas (AG). This leads to the possibility of safe disposal of AG in deep geologic formations, such as saline aquifers. The stabilizing particles included pulverized limestone (CaCO{sub 3}), unprocessed flyash, collected by an electrostatic precipitator at a local coal-fired power plant, and pulverized siderite (FeCO{sub 3}). Particle size ranged from submicron to a few micrometers. The first important finding is that /CO{sub 2} and /H{sub 2}S freely mix as a binary liquid without phase separation. The next finding is that the mixture of /CO{sub 2} and /H{sub 2}S can be emulsified in water using fine particles as emulsifying agents. Such emulsions are stable over prolonged periods, so it should not be a problem to inject an emulsion into subterranean formations. The advantage of injecting an emulsion into subterranean formations is that it is denser than the pure liquid, therefore it is likely to disperse in the bottom of the geologic formation, rather than buoying upward (called fingering). In such a fashion, the risk of the liquids escaping from the formation, and possibly re-emerging into the atmosphere, is minimized. This is especially important for H{sub 2}S, because it is a highly toxic gas. Furthermore, the emulsion may interact with the surrounding minerals, causing mineral trapping. This may lead to longer sequestration periods than injecting the pure liquids alone.

  3. Electrochemical energy storage device based on carbon dioxide as electroactive species

    DOEpatents

    Nemeth, Karoly; van Veenendaal, Michel Antonius; Srajer, George

    2013-03-05

    An electrochemical energy storage device comprising a primary positive electrode, a negative electrode, and one or more ionic conductors. The ionic conductors ionically connect the primary positive electrode with the negative electrode. The primary positive electrode comprises carbon dioxide (CO.sub.2) and a means for electrochemically reducing the CO.sub.2. This means for electrochemically reducing the CO.sub.2 comprises a conductive primary current collector, contacting the CO.sub.2, whereby the CO.sub.2 is reduced upon the primary current collector during discharge. The primary current collector comprises a material to which CO.sub.2 and the ionic conductors are essentially non-corrosive. The electrochemical energy storage device uses CO.sub.2 as an electroactive species in that the CO.sub.2 is electrochemically reduced during discharge to enable the release of electrical energy from the device.

  4. Photocatalytic destruction of chlorinated solvents in water with solar energy

    SciTech Connect

    Pacheco, J.E.; Prairie, M.R.; Yellowhorse, L. . Solar Thermal Technology Dept.)

    1993-08-01

    Sandia National Laboratories and the National Renewable Energy Laboratory are developing a photocatalytic process to destroy organic contaminants in water. Tests with common water pollutants have been conducted at Sandia's Solar Thermal Facility using a near commercial scale, single-axis tracking parabolic trough system with a glass pipe reactor mounted at its focus. Experiments at this scale provide verification of laboratory studies and allow examination of design and operation issues at a real-lifescale. The catalyst, titanium dioxide (TiO[sub 2]), is a harmless material found in paint, cosmetics, and toothpaste. Experiments were conducted to determine the effects of key process parameters on destruction rates of chlorinated organic compounds that are common water pollutants. This paper summarizes the engineering-scale results of these experiments and analyses.

  5. Use of the response of photosynthesis to oxygen to estimate mesophyll conductance to carbon dioxide in water-stressed soybean leaves

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Several types of evidence indicate that there is a significant resistance to the movement of carbon dioxide from the substomatal air space to the site of fixation in the chloroplasts and that the resistance may vary with temperature, carbon dioxide concentration and water stress. Methods of estimat...

  6. SYNTHESIS OF SULFUR-BASED WATER TREATMENT AGENT FROM SULFUR DIOXIDE WASTE STREAMS

    SciTech Connect

    Robert C. Brown; Maohong Fan; Adrienne Cooper

    2004-11-01

    Absorption of sulfur dioxide from a simulated flue gas was investigated for the production of polymeric ferric sulfate (PFS), a highly effective coagulant useful in treatment of drinking water and wastewater. The reaction for PFS synthesis took place near atmospheric pressure and at temperatures of 30-80 C. SO{sub 2} removal efficiencies greater than 90% were achieved, with ferrous iron concentrations in the product less than 0.1%. A factorial analysis of the effect of temperature, oxidant dosage, SO{sub 2} concentration, and gas flow rate on SO{sub 2} removal efficiency was carried out, and statistical analyses are conducted. The solid PFS was also characterized with different methods. Characterization results have shown that PFS possesses both crystalline and non-crystalline structure. The kinetics of reactions among FeSO{sub 4} {center_dot} 7H{sub 2}O, NaHSO{sub 3} and NaClO{sub 3} was investigated. Characterizations of dry PFS synthesized from SO{sub 2} show the PFS possesses amorphous structure, which is desired for it to be a good coagulant in water and wastewater treatment. A series of lab-scale experiments were conducted to evaluate the performance of PFS synthesized from waste sulfur dioxide, ferrous sulfate and sodium chlorate. The performance assessments were based on the comparison of PFS and other conventional and new coagulants for the removal of turbidity and arsenic under different laboratory coagulant conditions. Pilot plant studies were conducted at Des Moines Water Works in Iowa and at the City of Savannah Industrial and Domestic (I&D) Water Treatment Plant in Port Wentworth, Georgia. PFS performances were compared with those of conventional coagulants. The tests in both water treatment plants have shown that PFS is, in general, comparable or better than other coagulants in removal of turbidity and organic substances. The corrosion behavior of polymeric ferric sulfate (PFS) prepared from SO{sub 2} and ferric chloride (FC) were compared. Results

  7. Understanding the Phase Behavior of Tetrahydrofuran + Carbon Dioxide, + Methane, and + Water Binary Mixtures from the SAFT-VR Approach.

    PubMed

    Míguez, J M; Piñeiro, M M; Algaba, J; Mendiboure, B; Torré, J P; Blas, F J

    2015-11-01

    The high-pressure phase diagrams of the tetrahydrofuran(1) + carbon dioxide(2), + methane(2), and + water(2) mixtures are examined using the SAFT-VR approach. Carbon dioxide molecule is modeled as two spherical segments tangentially bonded, water is modeled as a spherical segment with four associating sites to represent the hydrogen bonding, methane is represented as an isolated sphere, and tetrahydrofuran is represented as a chain of m tangentially bonded spherical segments. Dispersive interactions are modeled using the square-well intermolecular potential. In addition, two different molecular model mixtures are developed to take into account the subtle balance between water-tetrahydrofuran hydrogen-bonding interactions. The polar and quadrupolar interactions present in water, tetrahydrofuran, and carbon dioxide are treated in an effective way via square-well potentials of variable range. The optimized intermolecular parameters are taken from the works of Giner et al. (Fluid Phase Equil. 2007, 255, 200), Galindo and Blas (J. Phys. Chem. B 2002, 106, 4503), Patel et al. (Ind. Eng. Chem. Res. 2003, 42, 3809), and Clark et al. (Mol. Phys. 2006, 104, 3561) for tetrahydrofuran, carbon dioxide, methane, and water, respectively. The phase diagrams of the binary mixtures exhibit different types of phase behavior according to the classification of van Konynenburg and Scott, ranging from types I, III, and VI phase behavior for the tetrahydrofuran(1) + carbon dioxide(2), + methane(2), and + water(2) binary mixtures, respectively. This last type is characterized by the presence of a Bancroft point, positive azeotropy, and the so-called closed-loop curves that represent regions of liquid-liquid immiscibility in the phase diagram. The system exhibits lower critical solution temperatures (LCSTs), which denote the lower limit of immiscibility together with upper critical solution temperatures (UCSTs). This behavior is explained in terms of competition between the incompatibility

  8. Crosslinked PEG and PEBAX Membranes for Concurrent Permeation of Water and Carbon Dioxide.

    PubMed

    Scholes, Colin A; Chen, George Q; Lu, Hiep T; Kentish, Sandra E

    2015-01-01

    Membrane technology can be used for both post combustion carbon dioxide capture and acidic gas sweetening and dehydration of natural gas. These processes are especially suited for polymeric membranes with polyether functionality, because of the high affinity of this species for both H₂O and CO₂. Here, both crosslinked polyethylene glycol diacrylate and a polyether-polyamide block copolymer (PEBAX 2533(©)) are studied for their ability to separate CO₂ from CH₄ and N₂ under single and mixed gas conditions, for both dry and wet feeds, as well as when 500 ppm H₂S is present. The solubility of gases within these polymers is shown to be better correlated with the Lennard Jones well depth than with critical temperature. Under dry mixed gas conditions, CO₂ permeability is reduced compared to the single gas measurement because of competitive sorption from CH₄ or N₂. However, selectivity for CO₂ is retained in both polymers. The presence of water in the feed is observed to swell the PEG membrane resulting in a significant increase in CO₂ permeability relative to the dry gas scenario. Importantly, the selectivity is again retained under wet feed gas conditions. The presence of H₂S is observed to only slightly reduce CO₂ permeability through both membranes. PMID:26703745

  9. Synthesizing and dispersing silver nanoparticles in a water-in-supercritical carbon dioxide microemulsion

    SciTech Connect

    Ji, M.; Chen, X.; Wai, C.M.; Fulton, J.L.

    1999-03-24

    Reverse micelles and microemulsions formed in liquid and supercritical carbon dioxide (CO{sub 2}) allow highly polar or polarizable compounds to be dispersed in this nonpolar fluid. However, since the polarizability per unit volume of dense CO{sub 2} is quite low, it is difficult to overcome the strong van der Waals attractive interactions between particles in order to stably suspend macromolecular species. Conventional surfactants by themselves do not form reverse micelles or microemulsions in CO{sub 2} because the van der Waals interdroplet attractions are too high. The use of surfactants or cosurfactants with fluorinated tails provides a layer of a weakly attractive compound covering the highly attractive droplet cores, thus preventing their short-range interactions that would destabilize the system. Using this strategy, the authors describe a method to synthesize and stabilize metallic silver nanoparticles having diameters from 5 to 15 nm in supercritical CO{sub 2} using an optically transparent, water-in-CO{sub 2} microemulsion.

  10. Sulfur dioxide emissions and sulfur deposition from international shipping in Asian waters

    NASA Astrophysics Data System (ADS)

    Streets, David G.; Carmichael, Gregory R.; Arndt, Richard L.

    Emissions of sulfur dioxide from international shipping in Asian waters have been estimated using information on typical shipping parameters and quantities of goods shipped to and from the major ports. Emissions are estimated to be 236,000 t SO 2 per year in 1988. This represents 11.7% of emissions in Southeast Asia and 0.7% of total continental Asian emissions. Emissions from vessels in transit between ports are estimated to be 226,000 t SO 2 per year, and emissions from port activities are estimated to be 10,200 t SO 2 per year. Deposition of this sulfur was calculated using the ATMOS model of atmospheric transport and deposition. Shipping emissions were found to be the dominant source of sulfur deposition in large areas of the Indian Ocean, the western Pacific Ocean, and the South China Sea. Land areas most heavily affected are those bordering the Strait of Malacca, where portions of Sumatra, peninsular Malaysia, and Singapore have contributions from shipping in excess of 10% of total sulfur deposition. Observational data in Malaysia are consistent with these findings. It is suggested that emissions from shipping may be contributing to ecological damage in areas surrounding the Strait of Malacca.

  11. Crosslinked PEG and PEBAX Membranes for Concurrent Permeation of Water and Carbon Dioxide

    PubMed Central

    Scholes, Colin A.; Chen, George Q.; Lu, Hiep T.; Kentish, Sandra E.

    2015-01-01

    Membrane technology can be used for both post combustion carbon dioxide capture and acidic gas sweetening and dehydration of natural gas. These processes are especially suited for polymeric membranes with polyether functionality, because of the high affinity of this species for both H2O and CO2. Here, both crosslinked polyethylene glycol diacrylate and a polyether-polyamide block copolymer (PEBAX 2533©) are studied for their ability to separate CO2 from CH4 and N2 under single and mixed gas conditions, for both dry and wet feeds, as well as when 500 ppm H2S is present. The solubility of gases within these polymers is shown to be better correlated with the Lennard Jones well depth than with critical temperature. Under dry mixed gas conditions, CO2 permeability is reduced compared to the single gas measurement because of competitive sorption from CH4 or N2. However, selectivity for CO2 is retained in both polymers. The presence of water in the feed is observed to swell the PEG membrane resulting in a significant increase in CO2 permeability relative to the dry gas scenario. Importantly, the selectivity is again retained under wet feed gas conditions. The presence of H2S is observed to only slightly reduce CO2 permeability through both membranes. PMID:26703745

  12. Exchanges of oxygen, carbon dioxide, nitrogen and water in the caecilian Dermophis mexicanus.

    PubMed

    Stiffler, D F; Talbot, C R

    2000-11-01

    Oxygen consumption was measured in five Dermophis mexicanus and averaged (+/- SEM) 0.047 +/- 0.004 ml O2 g(-1) x h(-1). Carbon dioxide production averaged 0.053 +/- 0.005 ml CO2 g(-1) x h(-1) in the same five animals 1 week later. This metabolic rate is similar to metabolic rates of other Gymnophionans but lower than metabolic rates reported for Anurans and Urodeles. Total nitrogen excretion averaged 1.37 micromol N g(-1) x h(-1) which is higher than that found for other amphibians. Of this, 82.5% (1.13 micromol N g(-1) x h(-1)) was in the form of urea while 17.5% (0.24 micromol N g(-1) h(-1)) was in the form of NH3 + NH4+. Such ureotelism is typical of terrestrial amphibians like D. mexicanus. Osmotic water flux averaged 0.0193 ml g(-1) x h(-1) in control (sham injected) animals and was not significantly altered by injection of either arginine vasotocin or mesotocin. This osmotic flux is similar to osmotic fluxes found for other terrestrial amphibians. The combined data suggest that metabolism in D. mexicanus is, like most other Gymnophionans, lower than other amphibians. The high rates of nitrogen (especially urea) excretion suggests that this fossorial animal accumulates urea like other burrowing amphibians. PMID:11128440

  13. Surface activity of a fluorinated carbohydrate ester in water/carbon dioxide emulsions.

    PubMed

    Favrelle, Audrey; Boyère, Cédric; Tran, Kien My; Alaimo, David; Calvignac, Brice; Paquot, Michel; Boury, Frank; Jérôme, Christine; Debuigne, Antoine

    2013-05-15

    The water/carbon dioxide (W/CO2) interfacial activity and emulsifying capacity of hydrocarbon and fluorinated carbohydrate esters are investigated of the first time and compared to the performance of sodium-bis(2-ethylhexyl)sulfosuccinate (AOT). The reduction of the W/CO2 interfacial tension was measured using a pendant drop tensiometer equipped with a cell view pressurized with CO2 at 80 bar and 45°C. It was found that the interface stabilization improved in the order AOT<6-O-myristoyl mannose<6-O-(2H,2H,3H,3H-perfluoroundecanoyl)-D-mannose. In the latter case, a drastic reduction of the W/CO2 interfacial tension was observed (85% reduction, interfacial tension at the equilibrium=3.6 mN/m), which emphasizes the advantage of using a fluorinated CO2-philic tail and the potential of sugars as hydrophilic head. The formulation of stable W/CO2 emulsions was also achieved using the fluorinated mannose derivative. This study paves the way to the design of a novel class of competitive surface active agents for W/CO2 emulsions. PMID:23497920

  14. Reactions of plutonium dioxide with water and oxygen-hydrogen mixtures: Mechanisms for corrosion of uranium and plutonium

    SciTech Connect

    Haschke, John M.; Allen, Thomas H.; Morales, Luis A.

    1999-06-18

    Investigation of the interactions of plutonium dioxide with water vapor and with an oxygen-hydrogen mixture show that the oxide is both chemically reactive and catalytically active. Correspondence of the chemical behavior with that for oxidation of uranium in moist air suggests that similar catalytic processes participate in the mechanism of moisture-enhanced corrosion of uranium and plutonium. Evaluation of chemical and kinetic data for corrosion of the metals leads to a comprehensive mechanism for corrosion in dry air, water vapor, and moist air. Results are applied in confirming that the corrosion rate of Pu in water vapor decreases sharply between 100 and 200 degrees C.

  15. Direct gas-solid carbonation of serpentinite residues in the absence and presence of water vapor: a feasibility study for carbon dioxide sequestration.

    PubMed

    Veetil, Sanoopkumar Puthiya; Pasquier, Louis-César; Blais, Jean-François; Cecchi, Emmanuelle; Kentish, Sandra; Mercier, Guy

    2015-09-01

    Mineral carbonation of serpentinite mining residue offers an environmentally secure and permanent storage of carbon dioxide. The strategy of using readily available mining residue for the direct treatment of flue gas could improve the energy demand and economics of CO2 sequestration by avoiding the mineral extraction and separate CO2 capture steps. The present is a laboratory scale study to assess the possibility of CO2 fixation in serpentinite mining residues via direct gas-solid reaction. The degree of carbonation is measured both in the absence and presence of water vapor in a batch reactor. The gas used is a simulated gas mixture reproducing an average cement flue gas CO2 composition of 18 vol.% CO2. The reaction parameters considered are temperature, total gas pressure, time, and concentration of water vapor. In the absence of water vapor, the gas-solid carbonation of serpentinite mining residues is negligible, but the residues removed CO2 from the feed gas possibly due to reversible adsorption. The presence of small amount of water vapor enhances the gas-solid carbonation, but the measured rates are too low for practical application. The maximum CO2 fixation obtained is 0.07 g CO2 when reacting 1 g of residue at 200 °C and 25 barg (pCO2 ≈ 4.7) in a gas mixture containing 18 vol.% CO2 and 10 vol.% water vapor in 1 h. The fixation is likely surface limited and restricted due to poor gas-solid interaction. It was identified that both the relative humidity and carbon dioxide-water vapor ratio have a role in CO2 fixation regardless of the percentage of water vapor. PMID:25940479

  16. Methane and carbon dioxide concentrations in sediments and diffusive fluxes at the sediment-water interface from three tropical systems in Brazil during the pre-impoundment phase

    NASA Astrophysics Data System (ADS)

    Abe, D. S.; Sidagis-Galli, C.; Grimberg, D. E.; Blanco, F. D.; Rodrigues-Filho, J. L.; Tundisi, J. G.; Matsumura-Tundisi, T.; Tundisi, J. E.; Cimbleris, A. C.; Damázio, J. M.; Project Balcar

    2013-05-01

    The concentrations of methane and carbon dioxide in the sediments pore water were quantified by gas chromatography in three hydroelectric reservoirs under construction during the pre-impoundment phase. Sediment sampling was performed in ten to twelve stations in each river by a Kajak-Brinkhurst corer coupled to a 3 m long aluminum rod in four seasons. The theoretical diffusive fluxes of these gases at the sediment-water interface were also calculated using the Fick's first law of diffusion. The mean annual concentration and diffusive flux of methane were highest in the sediments of the Xingu River (12.71 ± 3.03 mmol CH4 m-2 and 3.84 ± 0.91 mmol CH4 m-2 d-1), located in the Amazon, influenced by the presence of organic matter originating from the surrounding forest. The mean annual concentration of carbon dioxide was highest in the São Marcos River (71.36 ± 10.36 mmol CO2 m-2), located in an area of cerrado savanna, while the highest diffusive flux of carbon dioxide was observed in the Madeira River (30.23 ± 2.41 mmol CO2 m-2 d-1), which rises in the Andes Cordillera and has a very high water flow. The mean concentration and diffusive flux of carbon dioxide in the three studied systems were much higher (64-98%) in comparison with the methane, influenced by the oxic condition in these lotic systems. Nevertheless, the present study shows that the sediments of these systems, especially in the Xingu River, have significant amount of methane dissolved in the pore water which is being diffused to the overlying water. The information obtained in this study during the pre-filling phase will be important for the calculation of net flows of greenhouse gases after the impoundment of these future reservoirs. This study is part of the Strategic Project "Monitoring Emissions of Greenhouse Gases in Hydroelectric Reservoirs" - Call 099/2008 of the Brazilian Agency of Electric Energy (ANEEL) and sponsored by ELETRONORTE, FURNAS and CHESF.

  17. A flow-system comparison of the reactivities of calcium superoxide and potassium superoxide with carbon dioxide and water vapor

    NASA Technical Reports Server (NTRS)

    Wood, P. C.; Ballou, E. V.; Spitze, L. A.; Wydeven, T.

    1982-01-01

    A single pass flow system was used to test the reactivity of calcium superoxide with respiratory gases and the performance was compared to that of potassium superoxide. The KO2 system is used by coal miners as a self-contained unit in rescue operations. Particular attention was given to the reactivity with carbon dioxide and water vapor at different temperatures and partial pressures of oxygen, carbon dioxide, and water vapor. The calcium superoxide beds were found to absorb CO2 and H2O vapor, releasing O2. The KO2 bed, however, released O2 at twice the rate of CO2 absorption at 37 C. It is concluded that the calcium superoxide material is not a suitable replacement for the KO2 bed, although Ca(O2)2 may be added to the KO2 bed to enhance the CO2 absorption.

  18. Piezoelectric Water Drop Energy Harvesting

    NASA Astrophysics Data System (ADS)

    Al Ahmad, Mahmoud

    2014-02-01

    Piezoelectric materials convert mechanical deformation directly into electrical charges, which can be harvested and used to drive micropower electronic devices. The low power consumption of such systems on the scale of microwatts leads to the possibility of using harvested vibrational energy due to its almost universal nature. Vibrational energy harvested using piezoelectric cantilevers provides sufficient output for small-scale power applications. This work reports on vibrational energy harvesting from free-falling droplets at the tip of lead zirconate titanate piezoelectric-based cantilevers. The harvester incorporates a multimorph clamped-free cantilever made of lead zirconate titanate piezoelectric thick films. During the impact, the droplet's kinetic energy is transferred to the form of mechanical stress, forcing the piezoelectric structure to vibrate and thereby producing charges. Experimental results show an instantaneous drop-power of 2.15 mW cm-3 g-1. The scenario of a medium intensity of falling water drops, i.e., 200 drops per second, yielded a power of 0.48 W cm-3 g-1 per second.

  19. Equilibrium partitioning of 2,4-dichlorophenol between water and near-critical and supercritical carbon dioxide

    SciTech Connect

    Akgerman, A.; Carter, B.D. . Chemical Engineering Dept.)

    1994-07-01

    Distribution coefficients of 2,4-dichlorophenol between supercritical carbon dioxide and water are measured at 298.15 and 319.15 K over the pressure range 11-23 MPa using a single-stage equilibrium cell. The data are modeled by the Peng-Robinson equation of state with modified mixing rules. The data are also compared to literature data on distribution coefficients of phenol and p-chlorophenol.

  20. Raman spectroscopy of solutions and interfaces containing nitrogen dioxide, water, and 1,4 dioxane: Evidence for repulsion of surface water by NO{sub 2} gas

    SciTech Connect

    Murdachaew, Garold; Varner, Mychel E.; Veer, Wytze E. van der; Gerber, R. Benny; Phillips, Leon F.

    2014-05-14

    The interaction of water, 1,4 dioxane, and gaseous nitrogen dioxide, has been studied as a function of distance measured through the liquid-vapour interface by Raman spectroscopy with a narrow (<0.1 mm) laser beam directed parallel to the interface. The Raman spectra show that water is present at the surface of a dioxane-water mixture when gaseous NO{sub 2} is absent, but is virtually absent from the surface of a dioxane-water mixture when gaseous NO{sub 2} is present. This is consistent with recent theoretical calculations that show NO{sub 2} to be mildly hydrophobic.

  1. Determination of diffusion coefficients of carbon dioxide in water between 268 and 473 K in a high-pressure capillary optical cell with in situ Raman spectroscopic measurements

    NASA Astrophysics Data System (ADS)

    Lu, Wanjun; Guo, Huirong; Chou, I. M.; Burruss, R. C.; Li, Lanlan

    2013-08-01

    Accurate values of diffusion coefficients for carbon dioxide in water and brine at reservoir conditions are essential to our understanding of transport behavior of carbon dioxide in subsurface pore space. However, the experimental data are limited to conditions at low temperatures and pressures. In this study, diffusive transfer of carbon dioxide in water at pressures up to 45 MPa and temperatures from 268 to 473 K was observed within an optical capillary cell via time-dependent Raman spectroscopy. Diffusion coefficients were estimated by the least-squares method for the measured variations in carbon dioxide concentration in the cell at various sample positions and time. At the constant pressure of 20 MPa, the measured diffusion coefficients of carbon dioxide in water increase with increasing temperature from 268 to 473 K. The relationship between diffusion coefficient of carbon dioxide in water [D(CO2) in m2/s] and temperature (T in K) was derived with Speedy-Angell power-law approach as: D(CO>2)=D0[T/Ts-1]m where D0 = 13.942 × 10-9 m2/s, Ts = 227.0 K, and m = 1.7094. At constant temperature, diffusion coefficients of carbon dioxide in water decrease with pressure increase. However, this pressure effect is rather small (within a few percent).

  2. Determination of diffusion coefficients of carbon dioxide in water between 268 and 473 K in a high-pressure capillary optical cell with in situ Raman spectroscopic measurements

    USGS Publications Warehouse

    Lu, Wanjun; Guo, Huirong; Chou, I.-Ming; Burruss, R.C.; Li, Lanlan

    2013-01-01

    Accurate values of diffusion coefficients for carbon dioxide in water and brine at reservoir conditions are essential to our understanding of transport behavior of carbon dioxide in subsurface pore space. However, the experimental data are limited to conditions at low temperatures and pressures. In this study, diffusive transfer of carbon dioxide in water at pressures up to 45 MPa and temperatures from 268 to 473 K was observed within an optical capillary cell via time-dependent Raman spectroscopy. Diffusion coefficients were estimated by the least-squares method for the measured variations in carbon dioxide concentration in the cell at various sample positions and time. At the constant pressure of 20 MPa, the measured diffusion coefficients of carbon dioxide in water increase with increasing temperature from 268 to 473 K. The relationship between diffusion coefficient of carbon dioxide in water [D(CO2) in m2/s] and temperature (T in K) was derived with Speedy–Angell power-law approach as: D(CO2)=D0[T/Ts-1]m where D0 = 13.942 × 10−9 m2/s, Ts = 227.0 K, and m = 1.7094. At constant temperature, diffusion coefficients of carbon dioxide in water decrease with pressure increase. However, this pressure effect is rather small (within a few percent).

  3. The photodetachment cross-section and threshold energy of negative ions in carbon dioxide

    NASA Technical Reports Server (NTRS)

    Helmy, E. M.; Woo, S. B.

    1974-01-01

    Threshold energy and sunlight photodetachment measurements on negative carbon dioxide ions, using a 2.5 kw light pressure xenon lamp, show that: (1) Electron affinity of CO3(+) is larger than 2.7 e.V. and that an isomeric form of CO3(+) is likely an error; (2) The photodetachment cross section of CO3(-) will roughly be like a step function across the range of 4250 to 2500A, having its threshold energy at 4250A; (3) Sunlight photodetachment rate for CO3(-) is probably much smaller than elsewhere reported; and (4) The probability of having photodetached electrons re-attach to form negative ions is less than 1%. Mass identifying drift tube tests confirm that the slower ion is CO3(-), formed through the O(-) + 2CO2 yields CO3(-) + CO2 reaction.

  4. UV-Vis, infrared, and mass spectroscopy of electron irradiated frozen oxygen and carbon dioxide mixtures with water

    SciTech Connect

    Jones, Brant M.; Kaiser, Ralf I.; Strazzulla, Giovanni

    2014-02-01

    Ozone has been detected on the surface of Ganymede via observation of the Hartley band through the use of ultraviolet spectroscopy and is largely agreed upon to be formed by radiolytic processing via interaction of magnetospheric energetic ions and/or electrons with oxygen-bearing ices on Ganymede's surface. Interestingly, a clearly distinct band near 300 nm within the shoulder of the UV-Vis spectrum of Ganymede was also observed, but currently lacks an acceptable physical or chemical explanation. Consequently, the primary motivation behind this work was the collection of UV-Vis absorption spectroscopy of ozone formation by energetic electron bombardment of a variety of oxygen-bearing ices (oxygen, carbon dioxide, water) relevant to this moon as well as other solar system. Ozone was indeed synthesized in pure ices of molecular oxygen, carbon dioxide and a mixture of water and oxygen, in agreement with previous studies. The Hartley band of the ozone synthesized in these ice mixtures was observed in the UV-Vis spectra and compared with the spectrum of Ganymede. In addition, a solid state ozone absorption cross section of 6.0 ± 0.6 × 10{sup –17} cm{sup 2} molecule{sup –1} was obtained from the UV-Vis spectral data. Ozone was not produced in the irradiated carbon dioxide-water mixtures; however, a spectrally 'red' UV continuum is observed and appears to reproduce well what is observed in a large number of icy moons such as Europa.

  5. Toward Solar Fuels: Photocatalytic Conversion of Carbon Dioxide to Hydrocarbons

    SciTech Connect

    Roy, SC; Varghese, OK; Paulose, M; Grimes, CA

    2010-03-01

    The past several decades have seen a significant rise in atmospheric carbon dioxide levels resulting from the combustion of hydrocarbon fuels. A solar energy based technology to recycle carbon dioxide into readily transportable hydrocarbon fuel (i.e., a solar fuel) would help reduce atmospheric CO2 levels and partly fulfill energy demands within the present hydrocarbon based fuel infrastructure. We review the present status of carbon dioxide conversion techniques, with particular attention to a recently developed photocatalytic process to convert carbon dioxide and water vapor into hydrocarbon fuels using sunlight.

  6. Nationwide water availability data for energy-water modeling.

    SciTech Connect

    Tidwell, Vincent Carroll; Zemlick, Katie M.; Klise, Geoffrey Taylor

    2013-11-01

    The purpose of this effort is to explore where the availability of water could be a limiting factor in the siting of new electric power generation. To support this analysis, water availability is mapped at the county level for the conterminous United States (3109 counties). Five water sources are individually considered, including unappropriated surface water, unappropriated groundwater, appropriated water (western U.S. only), municipal wastewater and brackish groundwater. Also mapped is projected growth in non-thermoelectric consumptive water demand to 2035. Finally, the water availability metrics are accompanied by estimated costs associated with utilizing that particular supply of water. Ultimately these data sets are being developed for use in the National Renewable Energy Laboratories' (NREL) Regional Energy Deployment System (ReEDS) model, designed to investigate the likely deployment of new energy installations in the U.S., subject to a number of constraints, particularly water.

  7. MULTISPECTRAL IDENTIFICATION OF CHLORINE DIOXIDE DISINFECTION BY-PRODUCTS IN DRINKING WATER

    EPA Science Inventory

    This paper discusses the identification of organic disinfection by-products (DBPs) at a pilot plant in Evansville, Indiana, that uses chlorine dioxide as a primary disinfectant. nconventional multispectral identification techniques (gas chromatography combined with high and low r...

  8. Toxicity profiling of water contextual zinc oxide, silver, and titanium dioxide nanoparticles in human oral and gastrointestinal cell systems.

    PubMed

    Giovanni, Marcella; Tay, Chor Yong; Setyawati, Magdiel Inggrid; Xie, Jianping; Ong, Choon Nam; Fan, Rongli; Yue, Junqi; Zhang, Lifeng; Leong, David Tai

    2015-12-01

    Engineered nanoparticles (ENPs) are increasingly detected in water supply due to environmental release of ENPs as the by-products contained within the effluent of domestic and industrial run-off. The partial recycling of water laden with ENPs, albeit at ultra-low concentrations, may pose an uncharacterized threat to human health. In this study, we investigated the toxicity of three prevalent ENPs: zinc oxide, silver, and titanium dioxide over a wide range of concentrations that encompasses drinking water-relevant concentrations, to cellular systems representing oral and gastrointestinal tissues. Based on published in silico-predicted water-relevant ENPs concentration range from 100 pg/L to 100 µg/L, we detected no cytotoxicity to all the cellular systems. Significant cytotoxicity due to the NPs set in around 100 mg/L with decreasing extent of toxicity from zinc oxide to silver to titanium dioxide NPs. We also found that noncytotoxic zinc oxide NPs level of 10 mg/L could elevate the intracellular oxidative stress. The threshold concentrations of NPs that induced cytotoxic effect are at least two to five orders of magnitude higher than the permissible concentrations of the respective metals and metal oxides in drinking water. Based on these findings, the current estimated levels of NPs in potable water pose little cytotoxic threat to the human oral and gastrointestinal systems within our experimental boundaries. PMID:24930694

  9. Energy's thirst for water in China.

    PubMed

    Cai, Beiming; Zhang, Bing; Bi, Jun; Zhang, Wenjing

    2014-10-21

    Water scarcity and uneven water distribution pose significant challenges to sustainable development and energy production in China. Based on the International Energy Agency (IEA)'s energy strategy scenarios for China, we evaluated the water withdrawal for energy production from 2011 to 2030. The results show that the amount of water withdrawal will be increased by 77% in 2030, which will aggravate China's water scarcity risk under current energy strategy. We also observed that 67% of the energy production in China occurs in areas that are facing water scarcity. Moreover, China's 12th Five-Year Plan of Energy Development does not change the existing energy strategies, and the planned total energy production is much higher than the IEA's projection, which will result in an increased demand for water resources. However, if China were to apply broad policies to reduce CO2 emissions, the amount of water withdrawal would also decline compared with current energy strategy. Thus, reforming China's energy structure and reducing energy usage are not only urgent because of climate challenges and air pollution but also essential to reducing the pressure of water scarcity. PMID:25243948

  10. Transport of carbon dioxide, water vapor, and ozone by turbulence and local circulations

    NASA Astrophysics Data System (ADS)

    Sun, Jielun; Desjardins, Raymond; Mahrt, Larry; MacPherson, Ian

    1998-10-01

    Nocturnal land breezes and daytime lake breezes are studied using data collected by the Canadian Twin Otter aircraft and a deck boat which traversed Candle Lake during the Boreal Ecosystem-Atmosphere Study (BOREAS). The nocturnal vertical transport of CO2, water vapor, and ozone over the lake consists of two parts: (1) mesoscale rising motion associated with land breeze convergence and (2) significant turbulence and vertical mixing driven by buoyancy in the lower part of the internal boundary layer and shear generation in the top part of the internal boundary layer. For comparison, the role of the lake in the daytime is examined in terms of formation of a stable internal boundary layer due to advection of warm air from land with small CO2 concentration over the cooler lake surface. Analysis of the aircraft and boat data indicates that the nocturnal land breeze plays an important role in the regional CO2 budget in the lake region. In the present study, CO2 is advected horizontally by a nocturnal land breeze circulation and vented vertically over Candle Lake ("chimney effect"). Such near-surface horizontal transport implies that part of the respirated CO2 never reaches the tower observational level, particularly under light wind conditions. This study speculates that preferred locations of vertical venting of CO2 may also occur due to convergence of nocturnal drainage circulations or flow meandering, although probably weaker than that associated with the land breeze. These circulations partly explain recent findings that tower-measured nocturnal turbulent fluxes of CO2 above the canopy and the subcanopy storage of CO2 frequently sum to less than the total respiration of CO2, leading to "missing CO2." Unfortunately, the present study does not allow evaluation of all of the terms in the carbon dioxide budget.

  11. Cadmium removal from water using thiolactic acid-modified titanium dioxide nanoparticles.

    SciTech Connect

    Skubal, L. R.; Meshkov, N. K.; Rajh, T.; Thurnauer, M.

    2002-05-31

    This study investigated the use of titanium dioxide (TiO{sub 2}) nanoparticles to remove aqueous cadmium from simulated wastewaters. Nanosized (45 A) colloids of anatase TiO{sub 2} were synthesized through the controlled hydrolysis of TiCl4 and their surfaces modified with the bidental chelating agent thiolactic acid (TLA). Colloids were introduced into 65 ppm cadmium-laden waters, and the suspensions were purged aerobically, anoxically with an inert gas, or by a sequential aerobic/anoxic purge. Suspensions were illuminated with 253.7 nm light. In each experiment, samples were taken from the reactor, filtered, and the filtrates analyzed by atomic absorption spectroscopy for residual cadmium. Results from the aerobic experiments exhibited minimal (approximately 10%) removal of the cadmium from solution and no reduction of the metal on either the modified or the unmodified colloid. Anoxic results were more promising, showing no cadmium reduction on the unmodified colloid but a 40% adsorption and reduction (from a +2 valence state to elemental cadmium as determined by methyl viologen tests) of cadmium on TLA-modified colloid in the presence of light. Results from the mixed atmospheric conditions fared the best and demonstrated that in the absence of light, approximately 20% of aqueous cadmium was sorbed to the modified colloid via a Freundlich adsorption isotherm. Upon illumination, greater than 90% of cadmium was removed by both adsorption and reduction processes onto the TLA-modified TiO{sub 2}. These removal and reduction processes were catalytic in nature. Results from this study are significant because to date, no other research in the literature has been able to accomplish cadmium removal and reduction using TiO{sub 2}.

  12. Energy dispersive X-ray analysis of titanium dioxide nanoparticle distribution after intravenous and subcutaneous injection in mice.

    PubMed

    Patri, Anil; Umbreit, Thomas; Zheng, J; Nagashima, K; Goering, Peter; Francke-Carroll, Sabine; Gordon, Edward; Weaver, James; Miller, Terry; Sadrieh, Nakissa; McNeil, Scott; Stratmeyer, Mel

    2009-11-01

    In an effort to understand the disposition and toxicokinetics of nanoscale materials, we used EDS (energy dispersive X-ray spectroscopy) to detect and map the distribution of titanium dioxide (TiO2) in tissue sections from mice following either subcutaneous (s.c.) or intravenous (i.v.) injection. TiO2 nanoparticles were administered at a dose of 560 mg/kg (i.v.) or 5600 mg/kg (s.c.) to Balb/c female mice on two consecutive days. Tissues (liver, kidney, lung, heart, spleen, and brain) were examined by light microscopy, TEM (transmission electron microscopy), SEM (scanning electron microscopy), and EDS following necropsy one day after treatment. Particle agglomerates were detected by light microscopy in all tissues examined, EDS microanalysis was used to confirm that these tissues contained elemental titanium and oxygen. The TEM micrographs and EDS spectra of the aggregates were compared with in vitro measurements of TiO2 nanoparticle injection solution (i.e., in water). The nanoparticles were also characterized using dynamic light scattering in water, 10 mM NaCl, and phosphate buffered saline (PBS). In low ionic strength solvents (water and 10 mM NaCl), the TiO2 particles had average hydrodynamic diameters ranging from 114-122 nm. In PBS, however, the average diameter increases to 1-2 microm, likely due to aggregation analogous to that observed in tissue by TEM and EDS. This investigation demonstrates the suitability of energy dispersive X-ray spectroscopy (EDS) for detection of nanoparticle aggregates in tissues and shows that disposition of TiO2 nanoparticles depends on the route of administration (i.v. or s.c.). PMID:19626582

  13. A comparison of six different ballast water treatment systems based on UV radiation, electrochlorination and chlorine dioxide.

    PubMed

    Stehouwer, Peter Paul; Buma, Anita; Peperzak, Louis

    2015-01-01

    The spread of aquatic invasive species through ballast water is a major ecological and economical threat. Because of this, the International Maritime Organization (IMO) set limits to the concentrations of organisms allowed in ballast water. To meet these limits, ballast water treatment systems (BWTSs) were developed. The main techniques used for ballast water treatment are ultraviolet (UV) radiation and electrochlorination (EC). In this study, phytoplankton regrowth after treatment was followed for six BWTSs. Natural plankton communities were treated and incubated for 20 days. Growth, photosystem II efficiency and species composition were followed. The three UV systems all showed similar patterns of decrease in phytoplankton concentrations followed by regrowth. The two EC and the chlorine dioxide systems showed comparable results. However, UV- and chlorine-based treatment systems showed significantly different responses. Overall, all BWTSs reduced phytoplankton concentrations to below the IMO limits, which represents a reduced risk of aquatic invasions through ballast water. PMID:25704551

  14. Single particle ICP-MS characterization of titanium dioxide, silver, and gold nanoparticles during drinking water treatment.

    PubMed

    Donovan, Ariel R; Adams, Craig D; Ma, Yinfa; Stephan, Chady; Eichholz, Todd; Shi, Honglan

    2016-02-01

    One of the most direct means for human exposure to nanoparticles (NPs) released into the environment is drinking water. Therefore, it is critical to understand the occurrence and fate of NPs in drinking water systems. The objectives of this study were to develop rapid and reliable analytical methods and apply them to investigate the fate and transportation of NPs during drinking water treatments. Rapid single particle ICP-MS (SP-ICP-MS) methods were developed to characterize and quantify titanium-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution, and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. The selected NPs were nearly completely (97 ± 3%) removed after lime softening and alum coagulation/activated carbon adsorption treatments. Additionally, source and drinking waters from three large drinking water treatment facilities utilizing similar treatments with the simulation test were collected and analyzed by the SP-ICP-MS methods. Ti-containing particles and dissolved Ti were present in the river water samples, but Ag and Au were not present. Treatments used at each drinking water treatment facility effectively removed over 93% of the Ti-containing particles and dissolved Ti from the source water. PMID:26347937

  15. Managing the urban water-energy nexus

    NASA Astrophysics Data System (ADS)

    Escriva-Bou, Alvar; Pulido-Velazquez, Manuel; Lund, Jay R.

    2016-04-01

    Water use directly causes a significant amount of energy use in cities. In this paper we assess energy and greenhouse emissions related with each part of the urban water cycle and the consequences of several changes in residential water use for customers, water and energy utilities, and the environment. First, we develop an hourly model of urban water uses by customer category including water-related energy consumption. Next, using real data from East Bay Municipal Utility District in California, we calibrate a model of the energy used in water supply, treatment, pumping and wastewater treatment by the utility. Then, using data from the California Independent System Operator, we obtain hourly costs of energy for the energy utility. Finally, and using emission factors reported by the energy utilities we estimate greenhouse gas emissions for the entire urban water cycle. Results of the business-as-usual scenario show that water end uses account for almost 95% of all water-related energy use, but the 5% managed by the utility is still worth over 12 million annually. Several simulations analyze the potential benefits for water demand management actions showing that moving some water end-uses from peak to off-peak hours such as outdoor use, dishwasher or clothes washer use have large benefits for water and energy utilities, especially for locations with a high proportion of electric water heaters. Other interesting result is that under the current energy rate structures with low or no fixed charges, energy utilities burden most of the cost of the conservation actions.

  16. Photooxidation of organic impurities in water using thin films of titanium dioxide

    SciTech Connect

    Matthews, R.W.

    1987-06-04

    Results of the destruction of organic solutes in a simple, thin film TiO2 reactor are described. The reactor was illuminated with a 20-W blacklight UV fluorescent tube and the aqueous stream containing the organic solute flowed past the stationary photocatalyst. In the continuous recirculation mode, the destructive rate of each solute obeyed approximately first-order kinetics. The reaction rate constant decreased with increasing solute concentration. The times for 50% destruction of 500 cmT of 10 M solutions of each of the solutes salicylic acid, phenol, 2-chlorophenol, 4-chlorophenol, benzoic acid, 2-naphthol, naphthalene, and fluorescein were 7.1, 7.2, 8.2, 8.7, 6.9, 8.5, 4.3, and 6.4 min, respectively. It was found that the observed apparent first-order dependence and the change in rate constant with concentration could by explained in terms of the integrated form of the Langmuir adsorption isotherm. A marked dependence of the destruction rate on flow rate was observed and an expression developed which allows the calculation of the destruction curve with good precision at any solute concentration and flow rate. A corresponding curve was observed for the formation of carbon dioxide from salicylic acid solution. It was shown that hydroxylation of the aromatic ring to give salicylic acid is a minor reaction path in the destruction of benzoic acid. The maximum quantum yield for the destruction of salicyclic acid at 25C was found to be 0.022. The activation energy for the photooxidation of salicyclic acid was determined to be 11.0 +/- 0.8 kJ mol .

  17. Ambiphilic Frustrated Lewis Pair Exhibiting High Robustness and Reversible Water Activation: Towards the Metal-Free Hydrogenation of Carbon Dioxide.

    PubMed

    Rochette, Étienne; Courtemanche, Marc-André; Pulis, Alexander P; Bi, Wenhua; Fontaine, Frédéric-Georges

    2015-01-01

    The synthesis and structural characterization of a phenylene-bridged Frustrated Lewis Pair (FLP) having a 2,2,6,6‑tetramethylpiperidine (TMP) as the Lewis base and a 9-borabicyclo[3.3.1]nonane (BBN) as the Lewis acid is reported. This FLP exhibits unique robustness towards the products of carbon dioxide hydrogenation. The compound shows reversible splitting of water, formic acid and methanol while no reaction is observed in the presence of excess formaldehyde. The molecule is incredibly robust, showing little sign of degradation after heating at 80 °C in benzene with 10 equiv. of formic acid for 24 h. The robustness of the system could be exploited in the design of metal-free catalysts for the hydrogenation of carbon dioxide. PMID:26132911

  18. Metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

    NASA Technical Reports Server (NTRS)

    Hart, Joan M.; Borghese, Joseph B.; Chang, Craig H.; Stonesifer, Greg T.

    1991-01-01

    Recent studies of Allied Signal metal oxide based absorbents demonstrated that these absorbents offer a unique capability to regeneratively remove both metabolic carbon dioxide and water vapor from breathing air; previously, metal oxides were considered only for the removal of CO2. The concurrent removal of CO2 and H2O vapor can simplify the astronaut Portable Life Support System (PLSS) by combining the CO2 and humidity control functions into one regenerative component. The use of metal oxide absorbents for removal of both CO2 ad H2O vapor in the PLSS is the focus of an ongoing program. The full scale Metal Oxide Carbon dioxide and Humidity Remover (MOCHR) and regeneration unit is described.

  19. Intersects between Land, Energy, Water and the Climate System

    NASA Astrophysics Data System (ADS)

    Hibbard, K. A.; Skaggs, R.; Wilson, T.

    2012-12-01

    Climate change affects water, and land resources, and with growing human activity, each of these sectors relies increasingly on the others for critical resources. Events such as drought across the South Central U.S. during 2011 demonstrate that climatic impacts within each of these sectors can cascade through interactions between sectors. Energy, water, and land resources are each vulnerable to impacts on either of the other two sectors. For example, energy systems inherently require land and water. Increased electricity demands to contend with climate change can impose additional burdens on overly subscribed water resources. Within this environment, energy systems compete for water with agriculture, human consumption, and other needs. In turn, climate driven changes in landscape attributes and land use affect water quality and availability as well as energy demands. Diminishing water quality and availability impose additional demands for energy to access and purify water, and for land to store and distribute water. In some situations, interactions between water, energy, and land resources make options for reducing greenhouse gas emissions vulnerable to climate change. Energy options such as solar power or biofuel use can reduce net greenhouse gas emissions as well as U.S. dependence on foreign resources. As a result, the U.S. is expanding renewable energy systems. Advanced technology such as carbon dioxide capture with biofuels may offer a means of removing CO2 from the atmosphere. But as with fossil fuels, renewable energy sources can impose significant demands for water and land. For example, solar power mayrequire significant land to site facilities and water for cooling or to produce steam. Raising crops to produce biofuels uses arable land and water that might otherwise be available for food production. Thus, warmer and drier climate can compromise these renewable energy resources, and drought can stress water supplies creating competition between energy

  20. Increases in desert shrub productivity under elevated carbon dioxide vary with water availability

    USGS Publications Warehouse

    Housman, D.C.; Naumburg, E.; Huxman, T. E.; Charlet, T.N.; Nowak, R.S.; Smith, S.D.

    2006-01-01

    Productivity of aridland plants is predicted to increase substantially with rising atmospheric carbon dioxide (CO2) concentrations due to enhancement in plant water-use efficiency (WUE). However, to date, there are few detailed analyses of how intact desert vegetation responds to elevated CO2. From 1998 to 2001, we examined aboveground production, photosynthesis, and water relations within three species exposed to ambient (around 38 Pa) or elevated (55 Pa) CO2 concentrations at the Nevada Desert Free-Air CO2 Enrichment (FACE) Facility in southern Nevada, USA. The functional types sampled - evergreen (Larrea tridentata), drought-deciduous (Ambrosia dumosa), and winter-deciduous shrubs (Krameria erecta) - represent potentially different responses to elevated CO2 in this ecosystem. We found elevated CO2 significantly increased aboveground production in all three species during an anomalously wet year (1998), with relative production ratios (elevated:ambient CO2) ranging from 1.59 (Krameria) to 2.31 (Larrea). In three below-average rainfall years (1999-2001), growth was much reduced in all species, with only Ambrosia in 2001 having significantly higher production under elevated CO2. Integrated photosynthesis (mol CO2 m-2 y-1) in the three species was 1.26-2.03-fold higher under elevated CO2 in the wet year (1998) and 1.32-1.43-fold higher after the third year of reduced rainfall (2001). Instantaneous WUE was also higher in shrubs grown under elevated CO2. The timing of peak canopy development did not change under elevated CO2; for example, there was no observed extension of leaf longevity into the dry season in the deciduous species. Similarly, seasonal patterns in CO2 assimilation did not change, except for Larrea. Therefore, phenological and physiological patterns that characterize Mojave Desert perennials - early-season lags in canopy development behind peak photosynthetic capacity, coupled with reductions in late-season photosynthetic capacity prior to reductions

  1. Development of a local carbon dioxide emissions inventory based on energy demand and waste production

    SciTech Connect

    Joao Gomes; Joana Nascimento; Helena Rodrigues

    2007-09-15

    The paper describes the study that led to the development of a carbon dioxide emissions matrix for the Oeiras municipality, one of the largest Portuguese municipalities, located in the metropolitan area of Lisbon. This matrix takes into account the greenhouse gas (GHG) emissions due to an increase of electricity demand in buildings as well as solid and liquid wastes treatment from the domestic and services sectors. Using emission factors that were calculated from the relationship between the electricity produced and amount of treated wastes, the GHC emissions in the Oeiras municipality were estimated for a time series of 6 yr (1998 - 2003). The obtained results showed that the electricity sector accounts for approximately 75% of the municipal emissions in 2003. This study was developed to obtain tools to base options and actions to be undertaken by local authorities such as energy planning and also public information. 11 refs., 12 tabs.

  2. Water demands for expanding energy development

    USGS Publications Warehouse

    Davis, G.H.; Wood, Leonard A.

    1974-01-01

    Water is used in producing energy for mining and reclamation of mined lands, onsite processing, transportation, refining, and conversion of fuels to other forms of energy. In the East, South, Midwest, and along the seacoasts, most water problems are related to pollution rather than to water supply. West of about the 100th meridian, however, runoff is generally less than potential diversions, and energy industries must compete with other water users. Water demands for extraction of coal, oil shale, uranium, and oil and gas are modest, although large quantities of water are used in secondary recovery operations for oil. The only significant use of water for energy transportation, aside from in-stream navigation use, is for slurry lines. Substantial quantities of water are required in the retorting and the disposal of spent oil shale. The conversion of coal to synthetic gas or oil or to electric power and the generation of electric power with nuclear energy require large quantities of water, mostly for cooling. Withdrawals for cooling of thermal-electric plants is by far the largest category of water use in energy industry, totaling about 170 billion gallons (644 million m3) per day in 1970. Water availability will dictate the location and design of energy-conversion facilities, especially in water deficient areas of the West.

  3. Saving Energy, Water, and Money with Efficient Water Treatment Technologies

    SciTech Connect

    Not Available

    2004-06-01

    Reverse Osmosis (RO) is a method of purifying water for industrial processes and human consumption; RO can remove mineral salts as well as contaminants such as bacteria and pesticides. Advances in water treatment technologies have enhanced and complemented the conventional RO process, reducing energy and water consumption, lowering capital and operating costs, and producing purer water. This publication of the Department of Energy's Federal Energy Management Program introduces RO, describes the benefits of high-efficiency reverse osmosis (HERO), and compares HERO with RO/electrodeionization (EDI) technology.

  4. Energy Savings from Industrial Water Reductions

    SciTech Connect

    Rao, Prakash; McKane, Aimee; de Fontaine, Andre

    2015-08-03

    Although it is widely recognized that reducing freshwater consumption is of critical importance, generating interest in industrial water reduction programs can be hindered for a variety of reasons. These include the low cost of water, greater focus on water use in other sectors such as the agriculture and residential sectors, high levels of unbilled and/or unregulated self-supplied water use in industry, and lack of water metering and tracking capabilities at industrial facilities. However, there are many additional components to the resource savings associated with reducing site water use beyond the water savings alone, such as reductions in energy consumption, greenhouse gas emissions, treatment chemicals, and impact on the local watershed. Understanding and quantifying these additional resource savings can expand the community of businesses, NGOs, government agencies, and researchers with a vested interest in water reduction. This paper will develop a methodology for evaluating the embedded energy consumption associated with water use at an industrial facility. The methodology developed will use available data and references to evaluate the energy consumption associated with water supply and wastewater treatment outside of a facility’s fence line for various water sources. It will also include a framework for evaluating the energy consumption associated with water use within a facility’s fence line. The methodology will develop a more complete picture of the total resource savings associated with water reduction efforts and allow industrial water reduction programs to assess the energy and CO2 savings associated with their efforts.

  5. Energy optimization of water distribution systems

    SciTech Connect

    1994-09-01

    Energy costs associated with pumping treated water into the distribution system and boosting water pressures where necessary is one of the largest expenditures in the operating budget of a municipality. Due to the size and complexity of Detroit`s water transmission system, an energy optimization project has been developed to better manage the flow of water in the distribution system in an attempt to reduce these costs.

  6. Momentum, water vapor, and carbon dioxide exchange at a centrally located prairie site during FIFE

    NASA Astrophysics Data System (ADS)

    Verma, Shashi B.; Kim, Joon; Clement, Robert J.

    1992-11-01

    Eddy correlation measurements were made of fluxes of momentum, sensible heat, water vapor, and carbon dioxide at a centrally located plateau site in the FIFE study area during the period from May to October 1987. About 82% of the vegetation at the site was comprised of several C4 grass species (big bluestem, Indian grass, switchgrass, tall dropseed, little bluestem, and blue grama), with the remainder being C3 grasses, sedges, forbs, and woody plants. The prairie was burned in mid-April and was not grazed. Precipitation during the study period was about normal, except for a 3-week dry period in late July to early August, which caused moisture stress conditions. The drag coefficient (Cd=u*2/u¯2, where u* is the friction velocity and ū is the mean wind speed at 2.25 m above the ground) of the prairie vegetation ranged from 0.0087 to 0.0099. The average d/zc and z0/zc (where d is the zero plane displacement, z0 is the roughness parameter, and zc is the canopy height) were estimated to be about 0.71 and 0.028, respectively. Information was developed on the aerodynamic conductance (ga) in terms of mean wind speed (measured at a reference height) for different periods in the growing season. During the early and peak growth stages, with favorable soil moisture, the daily evapotranspiration (ET) rates ranged from 3.9 to 6.6 mm d-1. The ET rate during the dry period was between 2.9 and 3.8 mm d-1. The value of the Priestley-Taylor coefficient (α), calculated as the ratio of the measured ET to the equilibrium ET, averaged around 1.26 when the canopy stomatal resistance (rc) was less than 100 s m-1. When rc increased above 100 s m-1, α decreased rapidly. The atmospheric CO2 flux data (eddy correlation) were used, in conjunction with estimated soil CO2 flux, to evaluate canopy photosynthesis (Pc). The dependence of Pc on photosynthetically active radiation (KPAR), vapor pressure deficit, and soil moisture was examined. Under nonlimiting soil moisture conditions, Pc was

  7. Changing Western water institutions: energy's role

    SciTech Connect

    Brown, F.L.; Roach, F.

    1982-01-01

    This paper describes the institutional mechanisms through which physical availability of water, historical pattern of water use, and unresolved water issues combine to constrain and channel the energy industry's use of water. These institutional mechanisms include the developing markets for water rights, the legal and administrative structure governing water allocation, the formation of social attitudes about water, and the political process that often implements concensus. Within this context, the narrow physical interpretation commonly given to the question, Is there enough water, broadens greatly to include the institutional dimension that is the most important component of the question.

  8. Water Power for a Clean Energy Future

    SciTech Connect

    2013-04-12

    This document describes some of the accomplishments of the Department of Energy Water Power Program, and how those accomplishments are supporting the advancement of renewable energy generated using hydropower technologies and marine and hydrokinetic technologies.

  9. Environmental controls over carbon dioxide and water vapor exchange of terrestrial vegetation

    SciTech Connect

    B. E. Law; E. Falgeb; L. Guc; D. D. Baldocchic; P. Bakwind; P. Berbigiere; K. Davisf; A. J. Dolmang; M. Falkh; J. D. Fuentesi; A. Goldsteinc; A. Granierj; A. Grellek; D. Hollingerl; I. A. Janssensm; P. Jarvisn; N. O. Jenseno; G. Katulp; Y. Mahliq; G. Matteuccir; T. Meyerss; R. Monsont; W. Mungeru; W. Oechelv; R. Olsonw; K. Pilegaardx; K. T. Paw Uh; H. Thorgeirssony; R. Valentinir; S. Vermaz; T. Vesalaa1; K. Wilsons; S. Wofsyu

    2002-12-02

    The objective of this research was to compare seasonal and annual estimates of CO2 and water vapor exchange across sites in forests, grasslands, crops, and tundra that are part of an international network called FLUXNET, and to investigating the responses of vegetation to environmental variables. FLUXNETs goals are to understand the mechanisms controlling the exchanges of CO2, water vapor and energy across a spectrum of time and space scales, and to provide information for modeling of carbon and water cycling across regions and the globe. At a subset of sites, net carbon uptake (net ecosystem exchange, the net of photosynthesis and respiration) was greater under diffuse than under direct radiation conditions, perhaps because of a more efficient distribution of non-saturating light conditions for photosynthesis, lower vapor pressure deficit limitation to photosynthesis, and lower respiration associated with reduced temperature. The slope of the relation between monthly gross ecosystem production and evapotranspiration was similar between biomes, except for tundra vegetation, showing a strong linkage between carbon gain and water loss integrated over the year (slopes=3.4 g CO2/kg H2O for grasslands, 3.2 for deciduous broadleaf forests, 3.1 for crops, 2.4 for evergreen conifers, and 1.5 for tundra vegetation). The ratio of annual ecosystem respiration to gross photosynthesis averaged 0.83, with lower values for grasslands, presumably because of less investment in respiring plant tissue compared with forests. Ecosystem respiration was weakly correlated with mean annual temperature across biomes, in spite of within site sensitivity over shorter temporal scales. Mean annual temperature and site water balance explained much of the variation in gross photosynthesis. Water availability limits leaf area index over the long-term, and inter-annual climate variability can limit carbon uptake below the potential of the leaf area present.

  10. Computation of Bond Dissociation Energies for Removal of Nitrogen Dioxide Groups in Certain Aliphatic Nitro Compounds

    NASA Astrophysics Data System (ADS)

    Shao, Ju-Xiang; Cheng, Xin-Lu; Yang, Xiang-Dong; Xiang, Shi-Kai

    2006-04-01

    Bond dissociation energies for removal of nitrogen dioxide groups in 10 aliphatic nitro compounds, including nitromethane, nitroethylene, nitroethane, dinitromethane, 1-nitropropane, 2-nitropropane, 1-nitrobutane, 2-methyl-2-nitropropane, nitropentane, and nitrohexane, are calculated using the highly accurate complete basis set (CBS-Q) and the three hybrid density functional theory (DFT) methods B3LYP, B3PW91 and B3P86 with 6-31G** basis set. By comparing the computed bond dissociation energies and experimental results, we find that the B3LYP/6-31G** and B3PW91/6-31G** methods are incapable of predicting the satisfactory bond dissociation energy (BDE). However, B3P86/6-31G** and CBS-Q computations are capable of giving the calculated BDEs, which are in extraordinary agreement with the experimental data. Nevertheless, since CBS-Q computational demands increase rapidly with the number of containing atoms in molecules, larger molecules soon become prohibitively expensive. Therefore, we suggest to take the B3P86/6-31G** method as a reliable method of computing the BDEs for removal of the NO2 groups in the aliphatic nitro compounds.

  11. Development of High Efficiency Carbon Dioxide Commercial Heat Pump Water Heater

    SciTech Connect

    Michael PETERSEN; Chad D. BOWERS; Stefan ELBEL; Pega HRNJAK

    2012-07-01

    Although heat pump water heaters are today widely accepted in both Japan and Europe, where energy costs are high and government incentives for their use exist, acceptance of such products in the US has been limited. While this trend is slowly changing with the introduction of heat pump water heaters into the residential market, but acceptance remains low in the commercial sector. The objective of the presented work is the development of a high efficiency R744 heat pump water heater for commercial applications with effective utilization of the cooling capability for air conditioning and/or refrigeration. The ultimate goal is to achieve total system COP of up to 8. This unit will be targeted at commercial use where some cooling load is typically needed year round, such as restaurants, hotels, nursing homes, and hospitals. This paper presents the performance results from the development of four R744 commercial heat pump water heater packages of approximately 35 kW and comparison to a commercially available baseline R134a unit of the same capacity and footprint. In addition, the influences of an internal heat exchanger and an enhanced evaporator on the system performance are described and recommendations are made for further improvements of the R744 system.

  12. OZFLUX: Water, Energy, and Carbon Cycles in Australian Terrestrial Systems

    NASA Astrophysics Data System (ADS)

    Leuning, R.; Cleugh, H. A.; Finnigan, J. J.; Wang, Y.; Barrett, D. J.; Zegelin, S.

    2001-12-01

    The paper introduces the OZFLUX network which is being established to study several Australian ecosystems, discusses the analysis of eddy covariance data from tower-based flux stations, and then examines use of the flux data and a SVAT model within an atmospheric transport model to estimate regional fluxes. Lack of energy closure by eddy covariance measurements is commonly observed for Euroflux and Ameriflux installations. Reasons for the underestimates of H+ λ E may result from the way water vapor concentrations are determined using closed-path infrared gas analyzers. A comparison of open- and closed-path analyzers show that energy closure to better than 95% can be achieved with both systems when water vapor concentrations are expressed as mixing ratios in dry air, along with careful choice of the coordinate framework and the averaging periods used to calculate fluxes. Water, energy and carbon dioxide fluxes for two ecosystems are compared: 1) a 40 m tall, cool temperate Eucalyptus forest in SE Australia, and 2) a seasonally dry, tropical savanna woodland with sparsely arrayed, 10 m tall, Eucalyptus trees growing in a C4 grassland, in northern Queensland. Peak carbon dioxide uptake by the tall forest in the southern winter (T < 5\\deg C) is -10 μ mol~ m-2 s-1 compared to -2 μ mol~ m-2 s-1 for the savannah (T > 20 \\deg C), while evapotranspiration fluxes are similar (200~ W m-2). The differences arise because grasses in the savannah are dormant at this time. Seasonal carbon uptake is greatest in the summer for the temperate forest, and during the summer rainfall period from November to March for the savannah when grasses are actively growing. Fluxes measured at the two sites were used to test and parameterize the CSIRO Biosphere Model (CBM), which forms the lower boundary of a large-scale atmospheric transport model (DARLAM). We discuss the estimation of key parameters for CBM using ecological data on net primary production, and explain how, using a multiple

  13. Enhanced chlorine dioxide decay in the presence of metal oxides: relevance to drinking water distribution systems.

    PubMed

    Liu, Chao; von Gunten, Urs; Croué, Jean-Philippe

    2013-08-01

    Chlorine dioxide (ClO2) decay in the presence of typical metal oxides occurring in distribution systems was investigated. Metal oxides generally enhanced ClO2 decay in a second-order process via three pathways: (1) catalytic disproportionation with equimolar formation of chlorite and chlorate, (2) reaction to chlorite and oxygen, and (3) oxidation of a metal in a reduced form (e.g., cuprous oxide) to a higher oxidation state. Cupric oxide (CuO) and nickel oxide (NiO) showed significantly stronger abilities than goethite (α-FeOOH) to catalyze the ClO2 disproportionation (pathway 1), which predominated at higher initial ClO2 concentrations (56-81 μM). At lower initial ClO2 concentrations (13-31 μM), pathway 2 also contributed. The CuO-enhanced ClO2 decay is a base-assisted reaction with a third-order rate constant of 1.5 × 10(6) M(-2) s(-1) in the presence of 0.1 g L(-1) CuO at 21 ± 1 °C, which is 4-5 orders of magnitude higher than in the absence of CuO. The presence of natural organic matter (NOM) significantly enhanced the formation of chlorite and decreased the ClO2 disproportionation in the CuO-ClO2 system, probably because of a higher reactivity of CuO-activated ClO2 with NOM. Furthermore, a kinetic model was developed to simulate CuO-enhanced ClO2 decay at various pH values. Model simulations that agree well with the experimental data include a pre-equilibrium step with the rapid formation of a complex, namely, CuO-activated Cl2O4. The reaction of this complex with OH(-) is the rate-limiting and pH-dependent step for the overall reaction, producing chlorite and an intermediate that further forms chlorate and oxygen in parallel. These novel findings suggest that the possible ClO2 loss and the formation of chlorite/chlorate should be carefully considered in drinking water distribution systems containing copper pipes. PMID:23796229

  14. Water and carbon dioxide investigation in the inner coma of 67P/Churyumov-Gerasimenko

    NASA Astrophysics Data System (ADS)

    Migliorini, Alessandra; Piccioni, Giuseppe; Capaccioni, Fabrizio; Filacchione, Gianrico; Bockelée-Morvan, Dominique; Erard, Stefan; Leyrat, Cedric; Combi, Michael; Fougere, Nicolas; De Sanctis, Maria Cristina

    2015-11-01

    The study of 67P/CG coma environment is one of the primary scientific goals of the VIRTIS experiment aboard ESA Rosetta mission.In the present work, results of 74 observations acquired by VIRTIS-M IR channel in the 1-5 μm spectral range from 8 to 14 April 2015 are discussed. In this time, 67P/CG was at heliocentric distance of 1.9 AU, and the coma activity was monitored for about 10 full comet rotations. This allows one to tentatively correlate gas distribution with active areas on the nucleus and to disentangle gas emissions from dust.Vibrational emission lines of H2O and CO2 at 2.67 and 4.27 μm, respectively, are identified by VIRTIS-M imaging channel and mapped from the surface up to about 10 km altitude with a spatial resolution of approximately 40 m/px.The maximum H2O emission is mainly concentrated above Aten-Babi and Seth-Hapi active regions, which are located on the neck connecting the two principal lobes. The CO2 column density is quite poor in the neck region, while diffuse emission is clear above the small and great lobe regions. These observations confirm the anti correlation between these two main species, as already noticed by Bockelée-Morvan et al. (2015) and Hässig et al. (2014). Column density of both species decreases with altitude with the CO2 distribution decreasing more rapidly than the H2O. The H2O/CO2 ratio, which increases with the altitude, varies from 18.7 close to the nucleus to 30.8 at 2-3 km above the nucleus. These values refer to the equatorial region, calculated considering all the longitudes. Gas emission is maximum in the afternoon quadrant, from 12 LST to 18 LST.VIRTIS-M has revealed with unprecedented spatial resolution the distribution of gaseous species around a cometary nucleus and correlated the emissions with surface-active areas, altitude above the nucleus and local time. Our study confirms the asymmetric distribution of carbon dioxide, which has a more uniform distribution above the comet's nucleus than water vapour

  15. CARBON DIOXIDE CAPTURE FROM FLUE GAS USING DRY REGENERABLE SORBENTS

    SciTech Connect

    David A. Green; Brian S. Turk; Raghubir P. Gupta; Alejandro Lopez-Ortiz; Douglas P. Harrison; Ya Liang

    2001-07-01

    Sodium based sorbents including sodium carbonate may be used to capture carbon dioxide from flue gas. A relatively concentrated carbon dioxide stream may be recoverable for sequestration when the sorbent is regenerated. Electrobalance tests indicated that sodium carbonate monohydrate was formed in a mixture of helium and water vapor at temperatures below 65 C. Additional compounds may also form, but this could not be confirmed. In the presence of carbon dioxide and water vapor, both the initial reaction rate of sodium carbonate with carbon dioxide and water and the sorbent capacity decreased with increasing temperature, consistent with the results from the previous quarter. Increasing the carbon dioxide concentration at constant temperature and water vapor concentration produced a measurable increase in rate, as did increasing the water vapor concentration at constant carbon dioxide concentration and temperature. Runs conducted with a flatter TGA pan resulted in a higher initial reaction rate, presumably due to improved gas-solid contact, but after a short time, there was no significant difference in the rates measured with the different pans. Analyses of kinetic data suggest that the surface of the sodium carbonate particles may be much hotter than the bulk gas due to the highly exothermic reaction with carbon dioxide and water, and that the rate of heat removal from the particle may control the reaction rate. A material and energy balance was developed for a cyclic carbonation/calcination process which captures about 26 percent of the carbon dioxide present in flue gas available at 250 C.

  16. Simulation of Multiphase Water-Carbon Dioxide Mixture Flows in Porous Media

    NASA Astrophysics Data System (ADS)

    Afanasyev, A. A.

    2012-04-01

    Filtration Transport Simulator) code for compositional hydrodynamic simulations. The code was used for 1D, 2D and 3D simulations of carbon dioxide injection in water saturated reservoirs. The sample 1D simulation demonstrates a simple scenario when gaseous CO2 injection results in underground CO2 liquefaction and evolution of the three-phase flow zone. The two-phase and three-phase state zones are separated by clearly visible mobile phase discontinuities. The 2D and 3D examples demonstrate different scenarios of CO2 injection in a folded reservoirs with CO2 being both only in gaseous state (conventional situation) and in liquid state too. The 10th SPE comparative solution project reservoir was used to test the MUFITS code robustness in simulation of flows in highly heterogeneous reservoir. The work is supported financially by the Russian Foundation for Basic Research (projects 12-01-00465, 12-08-01039) and grant for leading scientific schools (1303.2012.1).

  17. Handbook of methods for the analysis of the various parameters of the carbon dioxide system in sea water. Version 2

    SciTech Connect

    Dickson, A.G.; Goyet, C.

    1994-09-01

    The collection of extensive, reliable, oceanic carbon data is a key component of the Joint Global Ocean Flux Study (JGOFS). A portion of the US JGOFS oceanic carbon dioxide measurements will be made during the World Ocean Circulation Experiment Hydrographic Program. A science team has been formed to plan and coordinate the various activities needed to produce high quality oceanic carbon dioxide measurements under this program. This handbook was prepared at the request of, and with the active participation of, that science team. The procedures have been agreed on by the members of the science team and describe well tested methods. They are intended to provide standard operating procedures, together with an appropriate quality control plan, for measurements made as part of this survey. These are not the only measurement techniques in use for the parameters of the oceanic carbon system; however, they do represent the current state-of-the-art for ship-board measurements. In the end, the editors hope that this handbook can serve widely as a clear and unambiguous guide to other investigators who are setting up to analyze the various parameters of the carbon dioxide system in sea water.

  18. Monochloramine and chlorine dioxide for controlling Legionella pneumophila contamination: biocide levels and disinfection by-product formation in hospital water networks.

    PubMed

    Marchesi, Isabella; Ferranti, Greta; Bargellini, Annalisa; Marchegiano, Patrizia; Predieri, Guerrino; Stout, Janet E; Borella, Paola

    2013-12-01

    Legionella colonization in hospital hot water distribution networks was evaluated following 36 months of continuous treatment with monochloramine and compared with chlorine dioxide. Nitrite, nitrate, chlorite, chlorate, bromide, trihalomethanes and haloacetic acids as well as the biocide concentration at sampled points were measured. Only 8/84 samples treated with monochloramine were found contaminated and after the first 8 months of treatment no Legionella was isolated. Chlorine dioxide was associated with a strong reduction in Legionella contamination compared to pre-treatment, but differences according to the device were observed. Monochloramine between 2 and 3 mg l(-1) and chlorine dioxide between 0.50 and 0.70 mg l(-1) were needed to control Legionella colonization. Comparing no- and post-flush samples, a higher frequency of no-flush positive samples was noted using chlorine dioxide, suggesting an increased risk for patients when they open the tap. No increase in chlorite levels and no water nitrification occurred by using monochloramine. Chlorite at levels exceeding the limit requested for drinking water was measured when chlorine dioxide was applied. In conclusion, we highlight that continuous injection of monochloramine should be considered as an effective alternative to chlorine dioxide in controlling legionellae contamination inside hospital water distribution systems. PMID:24334848

  19. COMBINED EFFECTS OF ELEVATED ATMOSPHERIC CARBON DIOXIDE AND OZONE ON SOYBEAN WHOLE-PLANT WATER USE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    With increasing atmospheric concentrations of trace gases such as carbon dioxide and ozone, a critical issue is how these changes will affect agricultural hydrologic cycles. To address an important part of this question, a study was undertaken to test the effects of elevated atmospheric carbon diox...

  20. Role of understory vegetation in decadal variation of water and carbon dioxide exchange over larch forest of eastern Siberia

    NASA Astrophysics Data System (ADS)

    Kotani, Ayumi; Ohta, Takeshi; Iijima, Yoshihiro; Maximov, Trofim

    2016-04-01

    This study investigated evapotranspiration and carbon dioxide exchange by the eddy covariance methods over larch-dominated forests in the middle part of the Lena basin, eastern Siberia. Forest ecosystem in this region is characterized by low precipitation, a short growing season, and extensive permafrost. Seasonal thawing permafrost supplies soil water, which is prevented to infiltrating by an impermeable frozen layer, and supports forest development. A decadal observation of hydro-meteorological variables shows inter-annual variability including extreme environmental conditions such as unusually wet active layer, which was maintained for a few years. Some mature larch trees locating poor drainage area suffered wet damage, while young birch and willow trees developed and herbs with water tolerance expanded. Compared to fluxes of the whole ecosystem, those based on the understory layer changed through the study period due to increase biomass and change of inside canopy environments; plentiful light and soil water, and enhanced turbulent mixing. Evapotranspiration from the understory layer increased and contribution to the whole forest flux reached 60%. Although this layer always acts as carbon dioxide source in seasonal average through the study period, source strength weaken and changed to temporal sink in the early summer. On contrast, contribution of the larch layer, in spite of remaining uncertainty in quantity, decreased in both of evapotranspiration and carbon dioxide uptake. Interactions between larch and understory support maintenance of this forest ecosystem. Decline of larch contribution is made up by understory growing, resulting in relatively stable whole forest exchange rate at least until this wet event.

  1. Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide

    SciTech Connect

    Nils Johnson; Joan Ogden

    2010-12-31

    In this final report, we describe research results from Phase 2 of a technical/economic study of fossil hydrogen energy systems with carbon dioxide (CO{sub 2}) capture and storage (CCS). CO{sub 2} capture and storage, or alternatively, CO{sub 2} capture and sequestration, involves capturing CO{sub 2} from large point sources and then injecting it into deep underground reservoirs for long-term storage. By preventing CO{sub 2} emissions into the atmosphere, this technology has significant potential to reduce greenhouse gas (GHG) emissions from fossil-based facilities in the power and industrial sectors. Furthermore, the application of CCS to power plants and hydrogen production facilities can reduce CO{sub 2} emissions associated with electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs) and, thus, can also improve GHG emissions in the transportation sector. This research specifically examines strategies for transitioning to large-scale coal-derived energy systems with CCS for both hydrogen fuel production and electricity generation. A particular emphasis is on the development of spatially-explicit modeling tools for examining how these energy systems might develop in real geographic regions. We employ an integrated modeling approach that addresses all infrastructure components involved in the transition to these energy systems. The overall objective is to better understand the system design issues and economics associated with the widespread deployment of hydrogen and CCS infrastructure in real regions. Specific objectives of this research are to: Develop improved techno-economic models for all components required for the deployment of both hydrogen and CCS infrastructure, Develop novel modeling methods that combine detailed spatial data with optimization tools to explore spatially-explicit transition strategies, Conduct regional case studies to explore how these energy systems might develop in different regions of the United States, and Examine how the

  2. The second-law analysis of a recirculation cycle desiccant cooling system: Cosorption of water vapor and carbon dioxide

    NASA Astrophysics Data System (ADS)

    Shen, C. M.; Worek, W. M.

    The second law, of thermodynamics is applied to a desiccant cooling system operating in the recirculation mode. In this study, the adsorbent is 13X molecular sieve, and the process air stream is assumed to contain only dry air, water vapor, and carbon dioxide. The second law efficiencies of a desiccant wheel are documented in terms of overall number of transfer units and the regeneration temperature. The results show that based on the first law and second law of thermodynamics, a solid desiccant adsorber using 13X molecular sieve can be optimally designed.

  3. Mechanism of the typical relaxation process at low frequency based on dielectric measurements of water absorbed in porous titanium dioxide

    NASA Astrophysics Data System (ADS)

    Gao, Xin; Wang, Qiang; Sun, Gang; Li, Chenxi; Hu, Lin

    2016-02-01

    Dielectric spectroscopy is a valuable tool in physics, chemistry, biophysics, and materials science. However, there is still an argument about the typical relaxation process at low frequency, which is always masked by electrode polarization. Low-frequency dielectric measurements of water absorbed in porous titanium dioxide have been performed. The experimental results show that typical polarization at low frequency is caused by space-charge polarization. A model is proposed to explain the experimental results, which indicates that the electric field in the sample is close to 0. An effective circuit is given, and the calculation gives similar dielectric spectra to those measured in experiments, which confirms the physical model.

  4. Water and carbon dioxide distribution in the 67P/Churyumov-Gerasimenko coma from VIRTIS-M infrared observations

    NASA Astrophysics Data System (ADS)

    Migliorini, A.; Piccioni, G.; Capaccioni, F.; Filacchione, G.; Bockelée-Morvan, D.; Erard, S.; Leyrat, C.; Combi, M. R.; Fougere, N.; Crovisier, J.; Taylor, F. W.; De Sanctis, M. C.; Capria, M. T.; Grassi, D.; Rinaldi, G.; Tozzi, G. P.; Fink, U.

    2016-05-01

    Context. Studying the coma environment of comet 67P/Churyumov-Gerasimenko (67P) is one of the primary scientific goals of the VIRTIS experiment on the ESA Rosetta mission. Aims: The distribution and variability of water vapour and carbon dioxide in the comet's coma are needed to estimate their production rate, abundances in the nucleus, and the spatial distribution of the active regions. Methods: Infrared emission lines from vibrational bands of water and carbon dioxide at 2.67 and 4.27 μm, respectively, were observed by the VIRTIS-M imaging channel and mapped from close to the nucleus up to ~10 km altitude with a resolution of ~40 m/px. A dataset consisting of 74 observations in the 1-5 μm spectral range acquired from 8 to 14 April 2015 when 67P was at a heliocentric distance of 1.9 AU is analysed in this work. A statistical correlation between the gas distribution and the surface's active regions was performed. Results: The maximum H2O emission is observed within 3 km from the nucleus and is mainly concentrated above two active regions, Aten-Babi and Seth-Hapi, while the CO2 distribution appears more uniform with significant emissions coming from both the "head" and southern latitude regions. In the equatorial region, the column densities of both species decrease with altitude, although CO2 decreases more rapidly than H2O. The calculated CO2/H2O column density ratios above Aten-Babi and Seth-Hapi are 2.4 ± 0.6% and 3.0 ± 0.7%, respectively. A value equal to 3.9 ± 1.0% is observed at equatorial latitudes in the region encompassing Imothep. Conclusions: VIRTIS-M has mapped the distribution of water vapour and carbon dioxide around the nucleus of 67P with unprecedented spatial resolution. The different water and carbon dioxide outgassing above the surface, seen in the VIRTIS-M data, might be indicative of a different thermal history of the northern and southern hemispheres of 67P.

  5. Effects of carbon dioxide variations in the unsaturated zone on water chemistry in a glacial-outwash aquifer

    USGS Publications Warehouse

    Lee, R.W.

    1997-01-01

    The research site at Otis Air Base, Cape Cod, Massachusetts, has been developed for hydrogeological and geochemical studies of sewage-effluent contaminated groundwater since 1982. Research of hydrologic properties, transport, and chemical and biological processes is ongoing, but the origin of background water chemistry has not been determined. The principal geochemical process giving rise to the observed background water chemistry is CO2-controlled hydrolysis of Na feldspar. Geochemical modeling demonstrated that CO2 sources could vary over the project area. Analyses of unsaturated zone gases showed variations in CO2 which were dependent on land use and vegetative cover in the area of groundwater recharge. Measurements of CO2 in unsaturated-zone gases showed that concentrations of total inorganic C in recharge water should range from about 0.035 to 1.0 mmoles/L in the vicinity of Otis Air Base. Flux of CO2 from the unsaturated zone varied for a principal land uses, ranging from 86 gC/m2/yr for low vegetated areas to 1630 gC/m2/yr for a golf course. Carbon dioxide flux from woodlands was 220 gC/m2/yr, lower than reported fluxes of 500 to 600 gC/m2/yr for woodlands in a similar climate. Carbon dioxide flux from grassy areas was 540 gC/m2/yr, higher than reported fluxes of 230 to 490 gC/m2/yr for grasslands in a similar climate.

  6. Energy for water and water for energy on Maui Island, Hawaii

    NASA Astrophysics Data System (ADS)

    Grubert, Emily A.; Webber, Michael E.

    2015-06-01

    Energy and water systems are interconnected. This work first characterizes 2010 primary energy demand for direct water services and local freshwater demand for energy on Maui Island, Hawaii, then investigates scenarios for future changes in these demands. The goal of this manuscript is to dissect the relationship and trends of energy-water connections to inform policymaking decisions related to water and energy planning. Analysis proceeds by inventorying water and energy flows and adjusting to a 2010 base year, then applying intensity factors for energy or water used at a given stage for a given sector to determine absolute energy and water demands for the isolated system of Maui Island. These bottom-up, intensity-based values are validated against published data where available. Maui consumes about 0.05% of its freshwater for energy (versus >6% for the US on average) and about 32% of its electricity (19% of its on-island primary energy) for direct water services (versus 8% of primary energy for the US on average). These values could change with policy choices like increased instream flows, higher wastewater treatment standards, electricity fuel mix changes, desalination, or increased biofuels production. This letter contributes a granular assessment of both energy for water and water for energy in a single isolated system, highlighting opportunities to address energy-water interdependencies in a context that could be relevant in other communities facing similar choices.

  7. Solar Energy for Space Heating & Hot Water.

    ERIC Educational Resources Information Center

    Energy Research and Development Administration, Washington, DC. Div. of Solar Energy.

    This pamphlet reviews the direct transfer of solar energy into heat, particularly for the purpose of providing space and hot water heating needs. Owners of buildings and homes are provided with a basic understanding of solar heating and hot water systems: what they are, how they perform, the energy savings possible, and the cost factors involved.…

  8. In Situ Infrared Spectroscopic Study of Brucite Carbonation in Dry to Water-Saturated Supercritical Carbon Dioxide

    SciTech Connect

    Loring, John S.; Thompson, Christopher J.; Zhang, Changyong; Wang, Zheming; Schaef, Herbert T.; Rosso, Kevin M.

    2012-04-25

    In geologic carbon sequestration, while part of the injected carbon dioxide will dissolve into host brine, some will remain as neat to water saturated super critical CO2 (scCO2) near the well bore and at the caprock, especially in the short-term life cycle of the sequestration site. Little is known about the reactivity of minerals with scCO2 containing variable concentrations of water. In this study, we used high-pressure infrared spectroscopy to examine the carbonation of brucite (Mg(OH)2) in situ over a 24 hr reaction period with scCO2 containing water concentrations between 0% and 100% saturation, at temperatures of 35, 50, and 70 °C, and at a pressure of 100 bar. Little or no detectable carbonation was observed when brucite was reacted with neat scCO2. Higher water concentrations and higher temperatures led to greater brucite carbonation rates and larger extents of conversion to magnesium carbonate products. The only observed carbonation product at 35 °C was nesquehonite (MgCO3 • 3H2O). Mixtures of nesquehonite and magnesite (MgCO3) were detected at 50 °C, but magnesite was more prevalent with increasing water concentration. Both an amorphous hydrated magnesium carbonate solid and magnesite were detected at 70 °C, but magnesite predominated with increasing water concentration. The identity of the magnesium carbonate products appears strongly linked to magnesium water exchange kinetics through temperature and water availability effects.

  9. In situ infrared spectroscopic study of brucite carbonation in dry to water-saturated supercritical carbon dioxide.

    PubMed

    Loring, John S; Thompson, Christopher J; Zhang, Changyong; Wang, Zheming; Schaef, Herbert T; Rosso, Kevin M

    2012-05-17

    In geologic carbon sequestration, whereas part of the injected carbon dioxide will dissolve into host brine, some will remain as neat to water saturated supercritical CO(2) (scCO(2)) near the well bore and at the caprock, especially in the short term life cycle of the sequestration site. Little is known about the reactivity of minerals with scCO(2) containing variable concentrations of water. In this study, we used high-pressure infrared spectroscopy to examine the carbonation of brucite (Mg(OH)(2)) in situ over a 24 h reaction period with scCO(2) containing water concentrations between 0% and 100% saturation, at temperatures of 35, 50, and 70 °C, and at a pressure of 100 bar. Little or no detectable carbonation was observed when brucite was reacted with neat scCO(2). Higher water concentrations and higher temperatures led to greater brucite carbonation rates and larger extents of conversion to magnesium carbonate products. The only observed carbonation product at 35 °C was nesquehonite (MgCO(3)·3H(2)O). Mixtures of nesquehonite and magnesite (MgCO(3)) were detected at 50 °C, but magnesite was more prevalent with increasing water concentration. Both an amorphous hydrated magnesium carbonate solid and magnesite were detected at 70 °C, but magnesite predominated with increasing water concentration. The identity of the magnesium carbonate products appears strongly linked to magnesium water exchange kinetics through temperature and water availability effects. PMID:22533532

  10. Multiple regression analysis in modelling of carbon dioxide emissions by energy consumption use in Malaysia

    NASA Astrophysics Data System (ADS)

    Keat, Sim Chong; Chun, Beh Boon; San, Lim Hwee; Jafri, Mohd Zubir Mat

    2015-04-01

    Climate change due to carbon dioxide (CO2) emissions is one of the most complex challenges threatening our planet. This issue considered as a great and international concern that primary attributed from different fossil fuels. In this paper, regression model is used for analyzing the causal relationship among CO2 emissions based on the energy consumption in Malaysia using time series data for the period of 1980-2010. The equations were developed using regression model based on the eight major sources that contribute to the CO2 emissions such as non energy, Liquefied Petroleum Gas (LPG), diesel, kerosene, refinery gas, Aviation Turbine Fuel (ATF) and Aviation Gasoline (AV Gas), fuel oil and motor petrol. The related data partly used for predict the regression model (1980-2000) and partly used for validate the regression model (2001-2010). The results of the prediction model with the measured data showed a high correlation coefficient (R2=0.9544), indicating the model's accuracy and efficiency. These results are accurate and can be used in early warning of the population to comply with air quality standards.

  11. Integrated Energy System with Beneficial Carbon Dioxide (CO{sub 2}) Use

    SciTech Connect

    Sun, Xiaolei; Rink, Nancy

    2011-04-30

    To address the public concerns regarding the consequences of climate change from anthropogenic carbon dioxide (CO{sub 2}) emissions, the U.S. Department of Energy National Energy Technology Laboratory (DOE-NETL) is actively funding a CO{sub 2} management program to develop technologies capable of reducing the CO{sub 2} emissions from fossil fuel power plants and other industrial facilities. Over the past decade, this program has focused on reducing the costs of carbon capture and storage technologies. Recently, DOE-NETL launched an alternative CO{sub 2} mitigation program focusing on beneficial CO{sub 2} reuse and supporting the development of technologies that mitigate emissions by converting CO{sub 2} to solid mineral form that can be utilized for enhanced oil recovery, in the manufacturing of concrete or as a benign landfill, in the production of valuable chemicals and/or fuels. This project was selected as a CO{sub 2} reuse activity which would conduct research and development (R&D) at the pilot scale via a cost-shared Cooperative Agreement number DE-FE0001099 with DOE-NETL and would utilize funds setaside by the American Recovery and Reinvestment Act (ARRA) of 2009 for Industrial Carbon Capture and Sequestration R&D,

  12. Evaluation of Refrigerating and Air Conditioning Devices in Energy Cascade Systems under the Restriction of Carbon Dioxide Emissions

    NASA Astrophysics Data System (ADS)

    Shimazaki, Yoichi; Akisawa, Atsushi; Kashiwagi, Takao

    It is necessary to introduce energy cascade systems into the industrial sector in Japan to reduce carbon dioxide emissions. The aim of this study is to evaluate the refrigerating and air conditioning devices in cases of introducing both energy cascade systems and thermal recycling systems in industries located around urban areas. The authors have developed an energy cascade model based on linear programming so as to minimize the total system costs with carbon taxes. Five cases are investigated. Limitation of carbon dioxide emissions results in the enhancement of heat cascading, where high temperature heat is supplied for process heating while low temperature one is shifted to refrigeration. It was found that increasing the amount of garbage combustor waste heat can reduce electric power for the turbo refrigerator by promoting waste heat driven ammonia absorption refrigerator.

  13. Open path measurements of carbon dioxide and water vapor under foggy conditions - technical problems, approaches and effects on flux measurements and budget calculations

    NASA Astrophysics Data System (ADS)

    El-Madany, T.; Griessbaum, F.; Maneke, F.; Chu, H.-S.; Wu, C.-C.; Chang, S. C.; Hsia, Y.-J.; Juang, J.-Y.; Klemm, O.

    2010-07-01

    To estimate carbon dioxide or water vapor fluxes with the Eddy Covariance method high quality data sets are necessary. Under foggy conditions this is challenging, because open path measurements are influenced by the water droplets that cross the measurement path as well as deposit on the windows of the optical path. For the LI-7500 the deposition of droplets on the window results in an intensity reduction of the infrared beam. To keep the strength of the infrared beam under these conditions, the energy is increased. A measure for the increased energy is given by the AGC value (Automatic Gain Control). Up to a AGC threshold value of 70 % the data from the LI-7500 is assumed to be of good quality (personal communication with LICOR). Due to fog deposition on the windows, the AGC value rises above 70 % and stays there until the fog disappears and the water on the windows evaporates. To gain better data quality during foggy conditions, a blower system was developed that blows the deposited water droplets off the window. The system is triggered if the AGC value rises above 70 %. Then a pneumatic jack will lift the blower system towards the LI-7500 and the water-droplets get blown off with compressed air. After the AGC value drops below 70 %, the pneumatic jack will move back to the idle position. Using this technique showed that not only the fog droplets on the window causing significant problems to the measurement, but also the fog droplets inside the measurement path. Under conditions of very dense fog the measured values of carbon dioxide can get unrealistically high, and for water vapor, negative values can be observed even if the AGC value is below 70 %. The negative values can be explained by the scatter of the infrared beam on the fog droplets. It is assumed, that different types of fog droplet spectra are causing the various error patterns observed. For high quality flux measurements, not only the AGC threshold value of 70 % is important, but also the fluctuation

  14. The costs of different energy taxes for stabilizing U. S. carbon dioxide emissions: An application of the Gemini model

    SciTech Connect

    Leary, N.A.; Scheraga, J.D. . Climate Change Div.)

    1993-09-01

    In the absence of policies to mitigate emissions of carbon dioxide, US emissions will grow substantially over the period 1990 to 2030. One option for mitigation of carbon dioxide emissions is to tax energy use. For example, fossil energy might be taxed according to its carbon content, heating value, or market value. Using a partial equilibrium model of US energy markets that combines detailed representation of technological processes with optimizing behavior by energy users and suppliers, the authors compare the costs of using carbon, Btu, and ad valorem taxes as instruments to implement a policy of emission stabilization. The authors also examine the differential impacts of these taxes on the mix of primary energy consumed in the US. The carbon tax induces the substitution of renewables and natural gas for coal and stabilizes carbon dioxide emissions at an estimated annual cost of $125 billion. The Btu tax induces the substitution of renewables for coal, but does not encourage the use of natural gas. The estimated cost of stabilization with the Btu tax is $210 billion per year. The ad valorem tax, like the Btu tax, does not encourage the substitution of natural gas for coal. It also causes a significant shift away from oil in comparison to the carbon tax. The cost of stabilizing emissions with the ad valorem tax is estimated at $450 billion per year.

  15. Operation of a breadboard liquid-sorbent/membrane-contactor system for removing carbon dioxide and water vapor from air

    NASA Technical Reports Server (NTRS)

    Mccray, Scott B.; Ray, Rod; Newbold, David D.; Millard, Douglas L.; Friesen, Dwayne T.; Foerg, Sandra

    1992-01-01

    Processes to remove and recover carbon dioxide (CO2) and water vapor from air are essential for successful long-duration space missions. This paper presents results of a developmental program focused on the use of a liquid-sorbent/membrane-contactor (LSMC) system for removal of CO2 and water vapor from air. In this system, air from the spacecraft cabin atmosphere is circulated through one side of a hollow-fiber membrane contactor. On the other side of the membrane contactor is flowed a liquid sorbent, which absorbs the CO2 and water vapor from the feed air. The liquid sorbent is then heated to desorb the CO2 and water vapor. The CO2 is subsequently removed from the system as a concentrated gas stream, whereas the water vapor is condensed, producing a water stream. A breadboard system based on this technology was designed and constructed. Tests showed that the LSMC breadboard system can produce a CO2 stream and a liquid-water stream. Details are presented on the operation of the system, as well as the effects on performance of variations in feed conditions.

  16. Global energy consumption for direct water use

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Hejazi, M. I.; Kim, S. H.; Kyle, P.; Davies, E. G.; Miralles, D. G.; Teuling, R.; He, Y.; Niyogi, D.

    2015-12-01

    Despite significant efforts to quantify the mutual inter-dependence of the water and energy sectors, global energy for water (EFW) remains poorly understood, resulting in biases in energy accounting that directly affect water and energy management and policy. We firstly evaluate the global energy consumption for direct water use from 1973 to 2012 with sectoral, regional and process-level details. Over the 40-year period, we detected multiple shifts in EFW by county and region. For example, we find that India, the Middle East and China have surpassed the United States as the three largest consumers of EFW since 2003, mostly because of rapid growth in groundwater-based irrigation, desalination, and industrial and municipal water use, respectively. Globally, EFW accounts for 1-3% of total primary energy consumption in 2010, of which 52% is surface water, 36% is groundwater, and 12% is non-fresh water. The sectoral allocation of EFW includes municipal (45%), industrial (29%), and agricultural use (26%), and process-level contributions are from source/conveyance (41%), water purification (19%), water distribution (13%) and wastewater treatment (22%). Our evaluation suggests that the EFW may increase in importance in the future due to growth in population and income, and depletion of surface and shallow aquifer water resources in water-scarce regions. We are incorporating this element into an integrated assessment model (IAM) and linking it back to energy balance within that IAM. By doing this, we will then explore the impacts of EFW on the global energy market (e.g., changes in the share of groundwater use and desalination), and the uncertainty of future EFW under different shared social pathway (SSP) and representative concentration pathway (RCP) scenarios, and consequences on the emission of greenhouse gases as well. We expect these EFW induced impacts will be considerable, and will then have significant implications for adaptive management and policy making.

  17. Nonthermal inactivation of Escherichia coli K12 in buffered peptone water using a pilot-plant scale supercritical carbon dioxide system with gas-liquid porous metal contractor

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study evaluated the effectiveness of a supercritical carbon dioxide (SCCO2) system, with a gas-liquid CO2 contactor, for reducing Escherichia coli K12 in diluted buffered peptone water. 0.1% (w/v) buffered peptone water inoculated with E. coli K12 was processed using the SCCO2 system at CO2 con...

  18. Absolute Entropy and Energy of Carbon Dioxide Using the Two-Phase Thermodynamic Model.

    PubMed

    Huang, Shao-Nung; Pascal, Tod A; Goddard, William A; Maiti, Prabal K; Lin, Shiang-Tai

    2011-06-14

    The two-phase thermodynamic (2PT) model is used to determine the absolute entropy and energy of carbon dioxide over a wide range of conditions from molecular dynamics trajectories. The 2PT method determines the thermodynamic properties by applying the proper statistical mechanical partition function to the normal modes of a fluid. The vibrational density of state (DoS), obtained from the Fourier transform of the velocity autocorrelation function, converges quickly, allowing the free energy, entropy, and other thermodynamic properties to be determined from short 20-ps MD trajectories. The anharmonic effects in the vibrations are accounted for by the broadening of the normal modes into bands from sampling the velocities over the trajectory. The low frequency diffusive modes, which lead to finite DoS at zero frequency, are accounted for by considering the DoS as a superposition of gas-phase and solid-phase components (two phases). The analytical decomposition of the DoS allows for an evaluation of properties contributed by different types of molecular motions. We show that this 2PT analysis leads to accurate predictions of entropy and energy of CO2 over a wide range of conditions (from the triple point to the critical point of both the vapor and the liquid phases along the saturation line). This allows the equation of state of CO2 to be determined, which is limited only by the accuracy of the force field. We also validated that the 2PT entropy agrees with that determined from thermodynamic integration, but 2PT requires only a fraction of the time. A complication for CO2 is that its equilibrium configuration is linear, which would have only two rotational modes, but during the dynamics it is never exactly linear, so that there is a third mode from rotational about the axis. In this work, we show how to treat such linear molecules in the 2PT framework. PMID:26596450

  19. Activation energy of water structural transitions

    NASA Astrophysics Data System (ADS)

    Kholmanskiy, Alexander

    2015-06-01

    In this work, the nature of molecular motions that dominate in the thermodynamics of anomalies of liquid water properties in the range of 0-100 °C has been studied. Temperature dependencies of water properties have been approximated by exponential functions and the activation energies for water structure transitions have been evaluated. The activation energy values were compared with the energy spectra of characteristic vibrations and with those of cooperative molecular motion in the lattice-type structure of hydrogen bonds. It has been found that it is the reaction of hydrogen bond breaking that mainly limits the abnormal dynamics of water viscosity, self-diffusion, dielectric relaxation time and electric conductivity. It has been assumed that the thermodynamics of cooperative motion and resonance phenomena in water clusters form a basis for the differentiation mechanism of extrema points in temperature dependencies of water density, isobaric heat capacity, sound velocity, surface tension coefficient and compressibility.

  20. Oxidation of plutonium dioxide.

    PubMed

    Korzhavyi, Pavel A; Vitos, Levente; Andersson, David A; Johansson, Börje

    2004-04-01

    The physics and chemistry of the actinide elements form the scientific basis for rational handling of nuclear materials. In recent experiments, most unexpectedly, plutonium dioxide has been found to react with water to form higher oxides up to PuO(2.27), whereas PuO(2) had always been thought to be the highest stable oxide of plutonium. We perform a theoretical analysis of this complicated situation on the basis of total energies calculated within density functional theory combined with well-established thermodynamic data. The reactions of PuO(2) with either O(2) or H(2)O to form PuO(2+delta) are calculated to be endothermic: that is, in order to occur they require a supply of energy. However, our calculations show that PuO(2+delta) can be formed, as an intermediate product, by reactions with the products of radiolysis of water, such as H(2)O(2). PMID:15034561

  1. Facial resurfacing using a high-energy, short-pulse carbon dioxide laser.

    PubMed

    Goodman, G J

    1996-08-01

    Facial skin resurfacing is now possible using short-pulse, high-energy carbon dioxide (CO2) lasers. The laser utilized in this particular paper is the Ultra-pulse CO2 laser. The Ultra-pulse laser represents the first CO2 laser able to vaporize tissue in a single pulse with the use of a large spot size. This laser utilizes the principles of selective photothermolysis. The high-power pulses are completed in less than the thermal relaxation time of skin, estimated to be less than 1 millisecond. This translates into rapid vaporization of tissue with little heat conduction to surrounding tissues. It also should allow a reproducibility of results between practitioners with set parameters not possible with previous CO2 lasers. Clinically, this laser is useful for the removal of skin lesions, and the resurfacing of areas of sun damage, wrinkles and scars. The immediate haemostasis and excellent visibility allows for precise vaporization of abnormal tissue. Rapid and pain-free wound healing is usual. The complication rate would appear to compare very favourably with dermabrasion and chemical peeling techniques. PMID:8771864

  2. Commercial titanium dioxide nanoparticles in both natural and synthetic water: comprehensive multidimensional testing and prediction of aggregation behavior.

    PubMed

    Ottofuelling, Stephanie; Von der Kammer, Frank; Hofmann, Thilo

    2011-12-01

    Engineered nanoparticles (ENPs) from industrial applications and consumer products are already being released into the environment. Their distribution within the environment is, among other factors, determined by the dispersion state and aggregation behavior of the nanoparticles and, in turn, directly affects the exposure of aquatic organisms to EPNs. The aggregation behavior (or colloidal stability) of these particles is controlled by the water chemistry and, to a large extent, by the surface chemistry of the particles. This paper presents results from extensive colloidal stability tests on commercially relevant titanium dioxide nanoparticles (Evonik P25) in well-controlled synthetic waters covering a wide range of pH values and water chemistries, and also in standard synthetic (EPA) waters and natural waters. The results demonstrate in detail the dependency of TiO(2) aggregation on the ionic strength of the solution, the presence of relevant monovalent and divalent ions, the presence and copresence of natural organic matter (NOM), and of course the pH of the solution. Specific interactions of both NOM and divalent ions with the TiO(2) surfaces modify the chemistry of these surfaces resulting in unexpected behavior. Results from matrix testing in well-controlled batch systems allow predictions to be made on the behavior in the broader natural environment. Our study provides the basis for a testing scheme and data treatment technique to extrapolate and eventually predict nanoparticle behavior in a wide variety of natural waters. PMID:22013881

  3. Susceptibility of Penicillium expansum spores to sodium hypochlorite, electrolyzed oxidizing water, and chlorine dioxide solutions modified with nonionic surfactants.

    PubMed

    Okull, Derrick O; Demirci, Ali; Rosenberger, Dave; LaBorde, Luke F

    2006-08-01

    The use of water flotation tanks during apple packing increases the risk of contamination of apples by spores of Penicillium expansum, which may accumulate in the recirculating water. Routine addition of sanitizers to the water may prevent such contamination. Sodium hypochlorite (NaOCl), chlorine dioxide (ClO2), and electrolyzed oxidizing (EO) water have varied activity against spores of P. expansum, and their effectiveness could be enhanced using surfactants. The objective of this study was to determine the ability of three nonionic surfactants, polyoxyethylene sorbitan monooleate (Tween 80), polyoxyethylene sorbitan monolaurate (Tween 20), and sorbitan monolaurate (Span 20), to enhance the efficacy of NaOCl, ClO2, and EO water against spores of P. expansum in aqueous suspension at various temperatures and pH conditions. The efficacy of NaOCl solutions was enhanced by the addition of surfactants at both pH 6.3 and pH 8 (up to 5 log CFU reduction). EO water and ClO2 were effective against P. expansum spores (up to 5 log CFU and 4 log CFU reduction, respectively), but addition of surfactants was not beneficial. All solutions were less effective at 4 degrees C compared to 24 degrees C irrespective of the presence of surfactants. Nonionic surfactants could potentially be used with NaOCl to improve control of P. expansum in flotation tanks, but the efficacy of such formulations should be validated under apple packing conditions. PMID:16924921

  4. Wettability of supercritical carbon dioxide/water/quartz systems: simultaneous measurement of contact angle and interfacial tension at reservoir conditions.

    PubMed

    Saraji, Soheil; Goual, Lamia; Piri, Mohammad; Plancher, Henry

    2013-06-11

    Injection of carbon dioxide in deep saline aquifers is considered as a method of carbon sequestration. The efficiency of this process is dependent on the fluid-fluid and rock-fluid interactions inside the porous media. For instance, the final storage capacity and total amount of capillary-trapped CO2 inside an aquifer are affected by the interfacial tension between the fluids and the contact angle between the fluids and the rock mineral surface. A thorough study of these parameters and their variations with temperature and pressure will provide a better understanding of the carbon sequestration process and thus improve predictions of the sequestration efficiency. In this study, the controversial concept of wettability alteration of quartz surfaces in the presence of supercritical carbon dioxide (sc-CO2) was investigated. A novel apparatus for measuring interfacial tension and contact angle at high temperatures and pressures based on Axisymmetric Drop Shape Analysis with no-Apex (ADSA-NA) method was developed and validated with a simple system. Densities, interfacial tensions, and dynamic contact angles of CO2/water/quartz systems were determined for a wide range of pressures and temperatures relevant to geological sequestration of CO2 in the subcritical and supercritical states. Image analysis was performed with ADSA-NA method that allows the determination of both interfacial tensions and contact angles with high accuracy. The results show that supercritical CO2 alters the wettability of quartz surface toward less water-wet conditions compared to subcritical CO2. Also we observed an increase in the water advancing contact angles with increasing temperature indicating less water-wet quartz surfaces at higher temperatures. PMID:23627310

  5. Estimated Carbon Dioxide Emissions in 2008: United States

    SciTech Connect

    Smith, C A; Simon, A J; Belles, R D

    2011-04-01

    Flow charts depicting carbon dioxide emissions in the United States have been constructed from publicly available data and estimates of state-level energy use patterns. Approximately 5,800 million metric tons of carbon dioxide were emitted throughout the United States for use in power production, residential, commercial, industrial, and transportation applications in 2008. Carbon dioxide is emitted from the use of three major energy resources: natural gas, coal, and petroleum. The flow patterns are represented in a compact 'visual atlas' of 52 state-level (all 50 states, the District of Columbia, and one national) carbon dioxide flow charts representing a comprehensive systems view of national CO{sub 2} emissions. Lawrence Livermore National Lab (LLNL) has published flow charts (also referred to as 'Sankey Diagrams') of important national commodities since the early 1970s. The most widely recognized of these charts is the U.S. energy flow chart (http://flowcharts.llnl.gov). LLNL has also published charts depicting carbon (or carbon dioxide potential) flow and water flow at the national level as well as energy, carbon, and water flows at the international, state, municipal, and organizational (i.e. United States Air Force) level. Flow charts are valuable as single-page references that contain quantitative data about resource, commodity, and byproduct flows in a graphical form that also convey structural information about the system that manages those flows. Data on carbon dioxide emissions from the energy sector are reported on a national level. Because carbon dioxide emissions are not reported for individual states, the carbon dioxide emissions are estimated using published energy use information. Data on energy use is compiled by the U.S. Department of Energy's Energy Information Administration (U.S. EIA) in the State Energy Data System (SEDS). SEDS is updated annually and reports data from 2 years prior to the year of the update. SEDS contains data on primary

  6. Future carbon dioxide concentration decreases canopy evapotranspiration and soil water depletion by field-grown maize.

    PubMed

    Hussain, Mir Zaman; Vanloocke, Andy; Siebers, Matthew H; Ruiz-Vera, Ursula M; Cody Markelz, R J; Leakey, Andrew D B; Ort, Donald R; Bernacchi, Carl J

    2013-05-01

    Maize, in rotation with soybean, forms the largest continuous ecosystem in temperate North America, therefore changes to the biosphere-atmosphere exchange of water vapor and energy of these crops are likely to have an impact on the Midwestern US climate and hydrological cycle. As a C4 crop, maize photosynthesis is already CO2 -saturated at current CO2 concentrations ([CO2 ]) and the primary response of maize to elevated [CO2 ] is decreased stomatal conductance (gs ). If maize photosynthesis is not stimulated in elevated [CO2 ], then reduced gs is not offset by greater canopy leaf area, which could potentially result in a greater ET reduction relative to that previously reported in soybean, a C3 species. The objective of this study is to quantify the impact of elevated [CO2 ] on canopy energy and water fluxes of maize (Zea mays). Maize was grown under ambient and elevated [CO2 ] (550 μmol mol(-1) during 2004 and 2006 and 585 μmol mol(-1) during 2010) using Free Air Concentration Enrichment (FACE) technology at the SoyFACE facility in Urbana, Illinois. Maize ET was determined using a residual energy balance approach based on measurements of sensible (H) and soil heat fluxes, and net radiation. Relative to control, elevated [CO2 ] decreased maize ET (7-11%; P < 0.01) along with lesser soil moisture depletion, while H increased (25-30 W m(-2) ; P < 0.01) along with higher canopy temperature (0.5-0.6 °C). This reduction in maize ET in elevated [CO2 ] is approximately half that previously reported for soybean. A partitioning analysis showed that transpiration contributed less to total ET for maize compared to soybean, indicating a smaller role of stomata in dictating the ET response to elevated [CO2 ]. Nonetheless, both maize and soybean had significantly decreased ET and increased H, highlighting the critical role of elevated [CO2 ] in altering future hydrology and climate of the region that is extensively cropped with these species. PMID:23505040

  7. Gas-phase energies of actinide oxides -- an assessment of neutral and cationic monoxides and dioxides from thorium to curium

    SciTech Connect

    Marcalo, Joaquim; Gibson, John K.

    2009-08-10

    An assessment of the gas-phase energetics of neutral and singly and doubly charged cationic actinide monoxides and dioxides of thorium, protactinium, uranium, neptunium, plutonium, americium, and curium is presented. A consistent set of metal-oxygen bond dissociation enthalpies, ionization energies, and enthalpies of formation, including new or revised values, is proposed, mainly based on recent experimental data and on correlations with the electronic energetics of the atoms or cations and with condensed-phase thermochemistry.

  8. Energy and water in the Great Lakes.

    SciTech Connect

    Tidwell, Vincent Carroll

    2011-11-01

    The nexus between thermoelectric power production and water use is not uniform across the U.S., but rather differs according to regional physiography, demography, power plant fleet composition, and the transmission network. That is, in some regions water demand for thermoelectric production is relatively small while in other regions it represents the dominate use. The later is the case for the Great Lakes region, which has important implications for the water resources and aquatic ecology of the Great Lakes watershed. This is today, but what about the future? Projected demographic trends, shifting lifestyles, and economic growth coupled with the threat of global climate change and mounting pressure for greater U.S. energy security could have profound effects on the region's energy future. Planning for such an uncertain future is further complicated by the fact that energy and environmental planning and regulatory decisionmaking is largely bifurcated in the region, with environmental and water resource concerns generally taken into account after new energy facilities and technologies have been proposed, or practices are already in place. Based on these confounding needs, the objective of this effort is to develop Great Lakes-specific methods and tools to integrate energy and water resource planning and thereby support the dual goals of smarter energy planning and development, and protection of Great Lakes water resources. Guiding policies for this planning are the Great Lakes and St. Lawrence River Basin Water Resources Compact and the Great Lakes Water Quality Agreement. The desired outcome of integrated energy-water-aquatic resource planning is a more sustainable regional energy mix for the Great Lakes basin ecosystem.

  9. The NASA Energy and Water cycle Study

    NASA Astrophysics Data System (ADS)

    Houser, P. R.; Entin, J. K.; Schiffer, R. A.; Belvedere, D. R.

    2010-12-01

    In 2003 NASA established the NASA Energy and Water-cycle Study (NEWS), whose long-term grand challenge is to document and enable improved, observationally based, predictions of water and energy cycle consequences of Earth system variability and change. Over the past two years, the NEWS team has been working on how to refine its approach to science integration . To this end, NEWS has created four working groups that identify integration needs and make the needed connections to partner and coordinate with water & energy cycle research and application activities going on at other organizations within NASA, nationally, and internationally. The four groups are: (1) Drought & Flood Extremes- including water and energy aspects of abrupt climate change, (2) Evaporation & Latent Heating - including both land and ocean, (3) Water and Energy Cycle Climatology - to exploit and influence evolving observing systems, and (4) Modeling & Water Cycle Prediction - foster interaction with the global modeling community. The first phase of NEWS focuses on the first coordinated attempt to describe the complete global energy and water cycle using existing and forthcoming satellite and ground based observations, and laying the foundation for essential NEWS developments in model representations of atmospheric energy and water exchange processes. This comprehensive energy and water data analysis program must exploit crucial datasets, some still requiring complete re-processing, and new satellite measurements. These data products will then be evaluated for accuracy and consistency, in part by using them in the first diagnosis of the weather-scale (space and time) variations of the global energy and water cycle over the past one-two decades. The primary objective is to ensure that results of this analysis effort serve as a recognized data basis to compare with corresponding climate statistics produced by existing climate models, quantify systematic deficiencies, and identify needed

  10. SWEEP - Save Water & Energy Education Program

    SciTech Connect

    Sullivan, Gregory P.; Elliott, Douglas B.; Hillman, Tim C.; Hadley, Adam; Ledbetter, Marc R.; Payson, David R.

    2001-05-03

    The objective of this study was to develop, monitor, analyze, and report on an integrated resource-conservation program highlighting efficient residential appliances and fixtures. The sites of study were 50 homes in two water-constrained communities located in Oregon. The program was designed to maximize water savings to these communities and to serve as a model for other communities seeking an integrated approach to energy and water resource efficiency. The program included the installation and in-place evaluation of energy- and water-efficient devices including the following: horizontal axis clothes washers (and the matching clothes dryers), resource-efficient dishwashers, an innovative dual flush low-flow toilet, low-flow showerheads, and faucet aerators. The significance of this activity lies in its integrated approach and unique metering evaluation of individual end-use, aggregated residential total use, and system-wide energy and water benefits.

  11. Laboratory Investigations in Support of Carbon Dioxide-in-Water Emulsions Stabilized by Fine Particles for Ocean and Geologic Sequestration of Carbon Dioxide

    SciTech Connect

    Dan Golomb; Eugene Barry; David Ryan

    2006-07-08

    C/W emulsion, the total cost of preparing the emulsion on site is about $8.5 per ton of liquid CO{sub 2}, not including the cost of the emulsion mixer. Currently, the cost estimates of capturing and liquefying CO{sub 2} at a coal-fired power plant range from $15 to 75/t CO{sub 2}. Thus, the preparation of C/W emulsions stabilized by pulverized limestone particles would add about 10 to 50% to the capture cost of CO{sub 2}. At this juncture the primary research objectives of this Co-operative Agreement are shifting toward geologic sequestration of carbon dioxide. Experiments are underway to create micro-emulsions of CO{sub 2}-in-Water (C/W) and Water-in-CO{sub 2} (W/C) stabilized by ultrafine particles ranging from sub-micrometer to a few micrometer in size. Such microemulsions are expected to readily penetrate deep geologic formations, such as porous sedimentary layers, including saline aquifers and semi-depleted oil and gas fields. Injections of (C/W) and (W/C) type micro-emulsions may prove to be less prone to leakage from the formations compared to injections of neat liquid or supercritical CO{sub 2}.

  12. Doping Metal–Organic Frameworks for Water Oxidation, Carbon Dioxide Reduction, and Organic Photocatalysis

    SciTech Connect

    Wang, Cheng; Xie, Zhigang; deKrafft, Kathryn E; Lin, Wenbin

    2011-07-22

    Catalytically competent Ir, Re, and Ru complexes H2L1–H2L6 with dicarboxylic acid functionalities were incorporated into a highly stable and porous Zr6O4(OH)4(bpdc)6 (UiO-67, bpdc = para-biphenyldicarboxylic acid) framework using a mix-and-match synthetic strategy. The matching ligand lengths between bpdc and L1–L6 ligands allowed the construction of highly crystalline UiO-67 frameworks (metal–organic frameworks (MOFs) 1–6) that were doped with L1–L6 ligands. MOFs 1–6 were isostructural to the parent UiO-67 framework as shown by powder X-ray diffraction (PXRD) and exhibited high surface areas ranging from 1092 to 1497 m2/g. MOFs 1–6 were stable in air up to 400 °C and active catalysts in a range of reactions that are relevant to solar energy utilization. MOFs 1–3 containing [Cp*IrIII(dcppy)Cl] (H2L1), [Cp*IrIII(dcbpy)Cl]Cl (H2L2), and [IrIII(dcppy)2(H2O)2]OTf (H2L3) (where Cp* is pentamethylcyclopentadienyl, dcppy is 2-phenylpyridine-5,4'-dicarboxylic acid, and dcbpy is 2,2'-bipyridine-5,5'-dicarboxylic acid) were effective water oxidation catalysts (WOCs), with turnover frequencies (TOFs) of up to 4.8 h–1. The [ReI(CO)3(dcbpy)Cl] (H2L4) derivatized MOF 4 served as an active catalyst for photocatalytic CO2 reduction with a total turnover number (TON) of 10.9, three times higher than that of the homogeneous complex H2L4. MOFs 5 and 6 contained phosphorescent [IrIII(ppy)2(dcbpy)]Cl (H2L5) and [RuII(bpy)2(dcbpy)]Cl2 (H2L6) (where ppy is 2-phenylpyridine and bpy is 2,2'-bipyridine) and were used in three photocatalytic organic transformations (aza-Henry reaction, aerobic amine coupling, and aerobic oxidation of thioanisole) with very high activities. The inactivity of the parent UiO-67 framework and the reaction supernatants in catalytic water oxidation, CO2 reduction, and organic transformations indicate both the molecular origin and heterogeneous nature of these catalytic processes. The stability of the doped UiO-67 catalysts under catalytic

  13. Development and Validation of a Novel Gas Analyzer for Simultaneous Measurements of Methane, Carbon Dioxide and Water Vapor in Ambient Air at 20 Hz

    NASA Astrophysics Data System (ADS)

    Gupta, M.; Owano, T.; Fellers, R.; Dong, F.; Baer, D.

    2008-12-01

    Methane has increased significantly with human population levels. Pre-1750 ice core data indicates that pre- industrialization levels were about 700 ppbv, while current levels are over 1750 ppbv. In current budget estimates of atmospheric methane, major contributors include both natural (wetlands) and anthropogenic sources (energy, landfills, ruminants, biomass burning, rice agriculture). The strengths of these sources vary spatially and temporally. Estimates of emissions from wetlands are also uncertain due to the extreme variability of these ecosystems. Because methane lifetime is relatively long (8.4 years), atmospheric variations in concentration are small and accuracy in measurement is important for understanding spatial and temporal variability. Atmospheric concentrations of carbon dioxide and methane rose sharply in 2007. Global CO2 climbed by 0.6 percent, or 19 billion tons, in 2007. Methane increased by 27 million tons after nearly a decade with little or no increase. Atmospheric CO2 levels currently stand at 385 ppmv, or about 38 percent higher than pre- industrial levels and the rise in CO2 concentrations has been accelerating since the 1980s when annual increases were around 1.5 ppm per year. Last year the increase was 2.4 ppm. We report on the development, application and independent performance characterization of a novel gas analyzer based on cavity-enhanced laser absorption spectroscopy. The Analyzer provides simultaneous measurements of methane, carbon dioxide and water vapor in ambient air in the field for applications that require high data rates (eddy correlation flux), wide dynamic range (e.g., chamber flux and other applications with concentrations that are ten times typical ambient levels or higher) and highest accuracy (atmospheric monitoring stations). The Analyzer provides continuous measurements at data rates up to 20 Hz and with replicate precision of 1 ppbv for methane (1 second measurement time), 0.2 ppmv for carbon dioxide (1 second

  14. Cavity Ring-Down Spectroscopy Lite: A Low Power Analyzer for measuring Carbon Dioxide, Methane and Water Vapor

    NASA Astrophysics Data System (ADS)

    Fleck, Derek; Hoffnagle, John; Tan, Sze; He, Yonggang

    2016-04-01

    Greenhouse gas accumulation has contributed to the changes in environments across the globe. Monitoring these fluctuations on global and local scales will allow scientists to better understand contributions that are made from nature and humans. This has led to the deployment of analytical instrumentation of all types to the most remote areas as well as the most densely populated areas. This however requires instruments to be precise, versatile, robust, and most importantly have power requirements that are as not limited by location, i.e. low enough power consumption to run off of batteries or even solar array. Here we present a full greenhouse gas analyzer that utilizes a new method of CRDS to measure carbon dioxide, methane and water vapor that consumes only 25W and still maintains long term stability to allow for averaging time of over 3 hours. Measurements have a 1-σ precision of 30 ppb for CO2 and 300 ppt of CH4 with 5 minutes of averaging; and with measurements of 3 hour averages reaching precisions down to 40ppt of methane. Additionally this new flavor of CRDS has allowed for an overall increase in measurement dynamic range from traditional CW-CRDS measuring methane up to 1000ppm and carbon dioxide up to several percent. We will present supplemental data acquired using this <11 kg analyzer, including soil respirations using closed static chambers and 10m tower measurements from Santa Clara, CA.

  15. Nuclear Energy for Water Desalting, A Bibliography.

    ERIC Educational Resources Information Center

    Kuhns, Helen F., Comp.; And Others

    This bibliography includes 215 abstracts of publications on the use of nuclear energy in the production of potable water from saline or brackish waters. The uses of nuclear reactors, radioisotopic heat sources, and nuclear explosives are covered in relation to the various desalination methods available. Literature through April 1967 has been…

  16. Validation of the doubly-labeled water (H/sup 3/H/sup 18/O) method for measuring water flux and energy metabolism in tenebrionid beetles

    SciTech Connect

    Cooper, P.D.

    1981-01-01

    Doubly-labeled water (H/sup 3/H/sup 18/O) has been used to determine water flux and energy metabolism in a variety of vertebrates. This study examines the applicability of this technique to arthropods. The theory of the technique depends upon the assumption that doubly-labeled water introduced into the animal's body water equilibrates with water and carbon dioxide by the action of carbonic anhydrase. Tritium (/sup 3/H) is lost from the animal only with water while oxygen-18 is lost with both water and carbon dioxide. The difference bwtween the rates of loss of the two isotopes is proportional to CO/sub 2/ loss rate. Validation of the use of tritiated water for measuring water flux was accomplished by comparing gravimetric measurements of water gain with flux rates determined by loss of tritiated water. At room humidity, an overestimate for influx calculated from labeled water calculations was found, averaging 12 mg H/sub 2/O (g.d)/sup -1/. Comparison of CO/sub 2/ loss rate determined isotopically with rates of CO/sub 2/ loss determined by standard metabolic rates also yielded overestimates for the isotopic technique, overestimates ranging between 20 and 30%. The relevance of this for studies using labeled water for studying water fluxes and free metabolism of free-ranging arthropods is discussed.

  17. WATER, ENERGY AND LIFE: FRESH VIEWS FROM THE WATER'S EDGE.

    PubMed

    Pollack, G H

    2010-12-01

    Recent observations have shown an unexpected feature of water adjacent to hydrophilic surfaces: the presence of wide interfacial zone that excludes solutes. The exclusion zone is charged, while the water beyond is oppositely charged, yielding a battery-like feature. The battery is powered by absorbed radiant energy. Implications of this energetic feature are discussed. It appears that the presence of this 'exclusion zone' may play an important role in the behavior of aqueous systems. PMID:22977460

  18. Energy Primer: Solar, Water, Wind, and Biofuels.

    ERIC Educational Resources Information Center

    Portola Inst., Inc., Menlo Park, CA.

    This is a comprehensive, fairly technical book about renewable forms of energy--solar, water, wind, and biofuels. The biofuels section covers biomass energy, agriculture, aquaculture, alcohol, methane, and wood. The focus is on small-scale systems which can be applied to the needs of the individual, small group, or community. More than one-fourth…

  19. Mutagenic activity associated with by-products of drinking water disinfection by chlorine, chlorine dioxide, ozone and UV-irradiation.

    PubMed

    Zoeteman, B C; Hrubec, J; de Greef, E; Kool, H J

    1982-12-01

    A retrospective epidemiological study in The Netherlands showed a statistical association between chlorination by-products in drinking water and cancer of the esophagus and stomach for males. A pilot-plant study with alternative disinfectants was carried out with stored water of the Rivers Rhine and Meuse. It was demonstrated that the increase of direct acting mutagens after treatment with chlorine dioxide is similar to the effect of chlorination. Ozonation of Rhine water reduced the mutagenic activity for Salmonella typhimurium TA 98 both with and without metabolic activation. UV alone hardly affects the mutagenicity of the stored river water for S. typh. TA 98. In all studies, practically no mutagenic activity for S. typh. TA 100 was found. Although remarkable changes in the concentration of individual organic compounds are reported, the identity of the mutagens detected is yet unclear. Compounds of possible interest due to their removal by ozonation are 1,3,3-trimethyloxindole, dicyclopentadiene and several alkylquinolines. Compounds which might be responsible for the increased mutagenicity after chlorination are two brominated acetonitriles and tri(2-chlorethyl) phosphate. Furthermore, the concentration procedure with adsorption on XAD resin and the subsequent elution step may have affected the results. It is proposed to focus further research more on the less volatile by-products of disinfection than on the trihalomethanes. PMID:7151762

  20. Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends.

    PubMed

    Vo, Huy Thanh; Imai, Tsuyoshi; Ho, Truc Thanh; Dang, Thanh-Loc Thi; Hoang, Son Anh

    2015-10-01

    Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO2 is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO2 as a disinfecting agent, and the pathogen inactivation mechanism of CO2 treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO2 treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO2 treatment. It will also be shown that the bacterial deaths under CO2 treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment). PMID:26456604

  1. Low carbon dioxide concentrations can reverse stomatal closure during water stress

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Leaf water potentials below threshold values result in reduced stomatal conductance. Stomatal closure at low leaf water potentials may serve to protect against cavitation of xylem. Possible control of stomatal conductance by leaf water potential or hydraulic conductance was tested by drying the root...

  2. Balancing Energy-Water-Agriculture Tradeoffs

    NASA Astrophysics Data System (ADS)

    Tidwell, V.; Hightower, M.

    2011-12-01

    In 2005 thermoelectric power production accounted for withdrawals of 201 billion gallons per day (BGD) representing 49% of total withdrawals, making it the largest user of water in the U.S. In terms of freshwater withdrawals thermoelectric power production is the second largest user at 140 BGD just slightly behind freshwater withdrawals for irrigation (USGS 2005). In contrast thermoelectric water consumption is projected at 3.7 BGD or about 3% of total U.S. consumption (NETL 2008). Thermoelectric water consumption is roughly equivalent to that of all other industrial demands and represents one of the fastest growing sectors since 1980. In fact thermoelectric consumption is projected to increase by 42 to 63% between 2005 and 2030 (NETL 2008). Agricultural water consumption has remained relatively constant at roughly 84 BGD or about 84% of total water consumption. While long-term regional electricity transmission planning has traditionally focused on cost, infrastructure utilization, and reliability, issues concerning the availability of water represent an emerging issue. Thermoelectric expansion must be considered in the context of competing demands from other water use sectors balanced with fresh and non-fresh water supplies subject to climate variability. Often such expansion targets water rights transfers from irrigated agriculture. To explore evolving tradeoffs an integrated energy-water-agriculture decision support system has been developed. The tool considers alternative expansion scenarios for the future power plant fleet and the related demand for water. The availability of fresh and non-fresh water supplies, subject to local institutional controls is then explored. This paper addresses integrated energy-water-agriculture planning in the western U.S. and Canada involving an open and participatory process comprising decision-makers, regulators, utility and water managers.

  3. A broadband cavity enhanced absorption spectrometer for aircraft measurements of glyoxal, methylglyoxal, nitrous acid, nitrogen dioxide, and water vapor

    NASA Astrophysics Data System (ADS)

    Min, K.-E.; Washenfelder, R. A.; Dubé, W. P.; Langford, A. O.; Edwards, P. M.; Zarzana, K. J.; Stutz, J.; Lu, K.; Rohrer, F.; Zhang, Y.; Brown, S. S.

    2015-10-01

    We describe a two-channel broadband cavity enhanced absorption spectrometer (BBCEAS) for aircraft measurements of glyoxal (CHOCHO), methylglyoxal (CH3COCHO), nitrous acid (HONO), nitrogen dioxide (NO2), and water (H2O). The instrument spans 361-389 and 438-468 nm, using two light emitting diodes (LEDs) and a grating spectrometer with a charge-coupled device (CCD) detector. Robust performance is achieved using a custom optical mounting system, high power LEDs with electronic on/off modulation, state-of-the-art cavity mirrors, and materials that minimize analyte surface losses. We have successfully deployed this instrument during two aircraft and two ground-based field campaigns to date. The demonstrated precision (2σ) for retrievals of CHOCHO, HONO and NO2 are 34, 350 and 80 pptv in 5 s. The accuracy is 5.8, 9.0 and 5.0 % limited mainly by the available absorption cross sections.

  4. A broadband cavity enhanced absorption spectrometer for aircraft measurements of glyoxal, methylglyoxal, nitrous acid, nitrogen dioxide, and water vapor

    NASA Astrophysics Data System (ADS)

    Min, K.-E.; Washenfelder, R. A.; Dubé, W. P.; Langford, A. O.; Edwards, P. M.; Zarzana, K. J.; Stutz, J.; Lu, K.; Rohrer, F.; Zhang, Y.; Brown, S. S.

    2016-02-01

    We describe a two-channel broadband cavity enhanced absorption spectrometer (BBCEAS) for aircraft measurements of glyoxal (CHOCHO), methylglyoxal (CH3COCHO), nitrous acid (HONO), nitrogen dioxide (NO2), and water (H2O). The instrument spans 361-389 and 438-468 nm, using two light-emitting diodes (LEDs) and a single grating spectrometer with a charge-coupled device (CCD) detector. Robust performance is achieved using a custom optical mounting system, high-power LEDs with electronic on/off modulation, high-reflectivity cavity mirrors, and materials that minimize analyte surface losses. We have successfully deployed this instrument during two aircraft and two ground-based field campaigns to date. The demonstrated precision (2σ) for retrievals of CHOCHO, HONO and NO2 are 34, 350, and 80 parts per trillion (pptv) in 5 s. The accuracy is 5.8, 9.0, and 5.0 %, limited mainly by the available absorption cross sections.

  5. The Energy-Water Nexus: Managing the Links between Energy and Water for a Sustainable Future

    NASA Astrophysics Data System (ADS)

    Hussey, Karen; Petit, Carine

    2010-05-01

    Water and energy are both indispensable inputs to modern economies but currently both resources are under threat owing to the impacts of an ever-increasing population and associated demand, unsustainable practices in agriculture and manufacturing, and the implications of a changing climate. However, it is where water and energy rely on each other that pose the most complex challenges for policy-makers. Water is needed for mining coal, drilling oil, refining gasoline, and generating and distributing electricity; and, conversely, vast amounts of energy are needed to pump, transport, treat and distribute water, particularly in the production of potable water through the use of desalination plants and waste water treatment plants. Despite the links, and the urgency in both sectors for security of supply, in existing policy frameworks energy and water policies are developed largely in isolation from one another. Worse still, some policies designed to encourage alternative energy supplies give little thought to the resultant consequences on water resources, and, similarly, policies designed to secure water supplies pay little attention to the resultant consequences on energy use. The development of new technologies presents both opportunities and challenges for managing the energy-water nexus but a better understanding of the links between energy and water is essential in any attempt to formulate policies for more resilient and adaptable societies. The energy-water nexus must be adequately integrated into policy and decision-making or governments run the risk of contradicting their efforts, and therefore failing in their objectives, in both sectors. A series of COST Exploratory Workshops, drawing on on-going research in the energy-water nexus from a number of international teams, identified the implications of the energy-water nexus on the development of (i) energy policies (ii) water resource management policies and (iii) climate adaptation and mitigation policies. A

  6. Carbon dioxide concentrator

    NASA Technical Reports Server (NTRS)

    Williams, C. F.; Huebscher, R. G.

    1972-01-01

    Passed exhaled air through electrochemical cell containing alkali metal carbonate aqueous solution, and utilizes platinized electrodes causing reaction of oxygen at cathode with water in electrolyte, producing hydroxyl ions which react with carbon dioxide to form carbonate ions.

  7. Formation of iodinated disinfection by-products during oxidation of iodide-containing waters with chlorine dioxide.

    PubMed

    Ye, Tao; Xu, Bin; Lin, Yi-Li; Hu, Chen-Yan; Lin, Lin; Zhang, Tian-Yang; Gao, Nai-Yun

    2013-06-01

    This study was to explore the formation of iodinated disinfection by-products (I-DBPs), including iodoform (CHI3), iodoacetic acid (IAA) and triiodoacetic acid (TIAA), when iodide-containing artificial synthesized waters and raw waters are in contact with chlorine dioxide (ClO2). Among the investigated I-DBPs, CHI3 was the major species during ClO2 oxidation in artificial synthesized waters. Impact factors were evaluated, including the concentrations of ClO2, iodide (I(-)), dissolved organic carbon (DOC) and pH. Formation of CHI3, IAA and TIAA followed an increasing and then decreasing pattern with increased ClO2 or DOC concentration. I-DBPs yield was significantly affected by solution pH. High concentrations of I-DBPs were generated under circumneutral conditions with the maximum formation at pH 8. The increase of I(-) concentration can increase I-DBPs yields, but the increment was suppressed when I(-) concentration was higher than 50 μM. When 100 μg/L I(-)and ClO2 (7.5-44.4 μM) were spiked to the raw water samples from Yangshupu and Minhang drinking water treatment plant, certain amounts of CHI3 and IAA were found under pH 7 and the concentrations were strongly correlated with ClO2 dosage and water qualities, however, no TIAA was detected. Finally, we investigated I-DBPs formation of 18 model compounds, including 4 carboxylic acids, 5 phenols and 8 amino acids, treating with ClO2 when I(-) was present. Results showed that most of these model compounds could form a considerable amount of I-DBPs, especially for propanoic acid, butanoic acid, resorcinol, hydroquinone, alanine, glutamic acid, phenylalanine and serine. PMID:23561492

  8. Photochemical mineralisation in a boreal brown water lake: considerable temporal variability and minor contribution to carbon dioxide production

    NASA Astrophysics Data System (ADS)

    Groeneveld, Marloes; Tranvik, Lars; Natchimuthu, Sivakiruthika; Koehler, Birgit

    2016-07-01

    Sunlight induces photochemical mineralisation of chromophoric dissolved organic matter (CDOM) to dissolved inorganic carbon (DIC) in inland waters, resulting in carbon dioxide (CO2) emissions to the atmosphere. Photochemical rate modelling is used to determine sunlight-induced CO2 emissions on large spatial and temporal scales. A sensitive model parameter is the wavelength-specific photochemical CDOM reactivity, the apparent quantum yield (AQY). However, the temporal variability of AQY spectra within inland waters remains poorly constrained. Here, we studied a boreal brown water lake in Sweden. We measured AQY spectra for photochemical DIC production monthly between June and November 2014 and parameterised a photochemical rate model. The total AQY between 280 and 600 nm increased about 3-fold during the open-water period, likely due to a high rainfall event with consecutive mixing in autumn that increased availability of highly photoreactive CDOM. However, the variability in AQY spectra over time was much smaller than previously reported variability in AQY spectra between lakes. Yet, using either the AQY spectrum from the least or from the most photoreactive water sample resulted in a 5-fold difference in simulated annual DIC photoproduction (2012-2014), with 2.0 ± 0.1 and 10.3 ± 0.7 g C m-2 yr-1, respectively. This corresponded to 1 and 8 % of the mean CO2 emissions measured from this lake. We conclude that (1) it may be recommendable to conduct repeated AQY measurements throughout the season for more accurate simulation of annual photochemical DIC production in lakes and (2), in agreement with previous studies, direct CDOM photomineralisation makes only a minor contribution to mean CO2 emissions from Swedish brown water lakes.

  9. Impact of carbon dioxide level, water velocity, strain, and feeding regimen on growth and fillet attributes of cultured rainbow trout (Oncorhynchus mykiss)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Production and management variables such as carbon dioxide (CO2) level, water velocity, and feeding frequency influence the growth and fillet attributes of rainbow trout (Oncorhynchus mykiss), as well as cost of production. More information is needed to determine the contributions of these variables...

  10. Efficacy of chlorine, acidic electrolyzed water and aqueous chlorine dioxide solutions to decontaminate Escherichia coli O157:H7 from lettuce leaves

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study compared the efficacy of chlorine (20 – 200 ppm), acidic electrolyzed water (50 ppm chlorine, pH 2.6), acidified sodium chlorite (20 – 200 ppm chlorite ion concentration, Sanova), and aqueous chlorine dioxide (20 – 200 ppm chlorite ion concentration, TriNova) washes in reducing population...

  11. Sequential disinfection of E. coli O157:H7 on shredded lettuce leaves by aqueous chlorine dioxide, ozonated water, and thyme essential oil

    NASA Astrophysics Data System (ADS)

    Singh, Nepal; Singh, Rakesh K.; Bhunia, Arun K.; Stroshine, Richard L.; Simon, James E.

    2001-03-01

    There have been numerous studies on effectiveness of different sanitizers for microbial inactivation. However, results obtained from different studies indicate that microorganism cannot be easily removed from fresh cut vegetables because of puncture and cut surfaces with varying surface topographies. In this study, three step disinfection approach was evaluated for inactivation of E. coli O157:H7 on shredded lettuce leaves. Sequential application of thyme oil, ozonated water, and aqueous chlorine dioxide was evaluated in which thyme oil was applied first followed by ozonated water and aqueous chlorine dioxide. Shredded lettuce leaves inoculated with cocktail culture of E. coli O157:H7 (C7927, EDL 933 and 204 P), were washed with ozonated water (15 mg/l for 10min), aqueous chlorine dioxide (10 mg/l,for 10min) and thyme oil suspension (0.1%, v/v for 5min). Washing of lettuce leaves with ozonated water, chlorine dioxide and thyme oil suspension resulted in 0.44, 1.20, and 1.46 log reduction (log10 cfu/g), respectively. However, the sequential treatment achieved approximately 3.13 log reductions (log10 cfu/g). These results demonstrate the efficacy of sequential treatments in decontaminating shredded lettuce leaves containing E. coli O157:H7.

  12. PHENOLIC CONTENT AND ANTIOXIDANT ACTIVITY OF SUPERCRITICAL CARBON DIOXIDE-TREATED AND AIR-CLASSIFIED OAT BRAN CONCENTRATE MICROWAVE-IRRADIATED IN WATER OR ETHANOL AT VARYING TEMPERATURES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Oat bran concentrate (OBC) was defatted with supercritical carbon dioxide (SCD), then microwave-irradiated at 50, 100 or 150 deg C for 10 min in water, 50% or 100% ethanol, and extract pH, soluble solids, phenolic content and antioxidant activity were analyzed. OBC was air-classified into five frac...

  13. A Thermodynamic Model for Predicting Mineral Reactivity in Supercritical Carbon Dioxide: I. Phase Behavior of Carbon Dioxide - Water - Chloride Salt Systems Across the H2O-Rich to the CO2-Rich Regions

    SciTech Connect

    Springer, Ronald D.; Wang, Zheming; Anderko, Andre; Wang, Peiming; Felmy, Andrew R.

    2012-09-05

    Phase equilibria in mixtures containing carbon dioxide, water, and chloride salts have been investigated using a combination of solubility measurements and thermodynamic modeling. The solubility of water in the CO2-rich phase of ternary mixtures of CO2, H2O and NaCl or CaCl2 was determined, using near infrared spectroscopy, at 90 atm and 40 to 100 °C. These measurements fill a gap in the experimental database for CO2 water salt systems, for which phase composition data have been available only for the H2O-rich phases. A thermodynamic model for CO2 water salt systems has been constructed on the basis of the previously developed Mixed-Solvent Electrolyte (MSE) framework, which is capable of modeling aqueous solutions over broad ranges of temperature and pressure, is valid to high electrolyte concentrations, treats mixed-phase systems (with both scCO2 and water present) and can predict the thermodynamic properties of dry and partially water-saturated supercritical CO2 over broad ranges of temperature and pressure. Within the MSE framework the standard-state properties are calculated from the Helgeson-Kirkham-Flowers equation of state whereas the excess Gibbs energy includes a long-range electrostatic interaction term expressed by a Pitzer-Debye-Hückel equation, a virial coefficient-type term for interactions between ions and a short-range term for interactions involving neutral molecules. The parameters of the MSE model have been evaluated using literature data for both the H2O-rich and CO2-rich phases in the CO2 - H2O binary and for the H2O-rich phase in the CO2 - H2O - NaCl / KCl / CaCl2 / MgCl2 ternary and multicompontent systems. The model accurately represents the properties of these systems at temperatures from 0°C to 300 °C and pressures up to ~4000 atm. Further, the solubilities of H2O in CO2-rich phases that are predicted by the model are in agreement with the new measurements for the CO2 - H2O - NaCl and CO2 - H2O - CaCl2 systems. Thus, the model can be

  14. Enhancing the efficacy of electrolytic chlorination for ballast water treatment by adding carbon dioxide.

    PubMed

    Cha, Hyung-Gon; Seo, Min-Ho; Lee, Heon-Young; Lee, Ji-Hyun; Lee, Dong-Sup; Shin, Kyoungsoon; Choi, Keun-Hyung

    2015-06-15

    We examined the synergistic effects of CO2 injection on electro-chlorination in disinfection of plankton and bacteria in simulated ballast water. Chlorination was performed at dosages of 4 and 6ppm with and without CO2 injection on electro-chlorination. Testing was performed in both seawater and brackish water quality as defined by IMO G8 guidelines. CO2 injection notably decreased from the control the number of Artemia franciscana, a brine shrimp, surviving during a 5-day post-treatment incubation (1.8 and 2.3 log10 reduction in seawater and brackish water, respectively at 6ppm TRO+CO2) compared with water electro-chlorinated only (1.2 and 1.3 log10 reduction in seawater and brackish water, respectively at 6ppm TRO). The phytoplankton Tetraselmis suecica, was completely disinfected with no live cell found at >4ppm TRO with and without CO2 addition. The effects of CO2 addition on heterotrophic bacterial growth was not different from electro-chlorination only. Total residual oxidant concentration (TRO) more rapidly declined in electro-chlorination of both marine and brackish waters compared to chlorine+CO2 treated waters, with significantly higher amount of TRO being left in waters treated with the CO2 addition. Total concentration of trihalomethanes (THMs) and haloacetic acids (HAAs) measured at day 0 in brackish water test were found to be 2- to 3-fold higher in 6ppm TRO+CO2-treated water than in 6ppm TRO treated water. The addition of CO2 to electro-chlorination may improve the efficiency of this sterilizing treatment of ballast water, yet the increased production of some disinfection byproducts needs further study. PMID:25841887

  15. Optimization of fixed titanium dioxide film on PET bottles and visual indicator for water disinfection

    NASA Astrophysics Data System (ADS)

    Heredia-Munoz, Manuel Antonio

    Water is perhaps the most important resource that sustains human life. According to the World Health Organization (WHO), almost two billion people do not have access to the required water that is needed to satisfy their daily needs and one billion do not have access to clean sources of water for consumption, most of them living in isolated and poor areas around the globe. Poor quality water increases the risk of cholera, typhoid fever and dysentery, and other water-borne illness making this problem a real crisis that humankind is facing. Several water disinfection technologies have been proposed as solutions for this problem. Solar water disinfection using TiO2 coated PET bottles was the alternative that is studied in this work. This technology does not only inactivate bacteria but also disintegrates organic chemicals that can be present in water. The objectives of this work address the optimization of the TiO 2 coated PET bottles technologies. The improvement on the bottle coating process, using two coats of 10% W/V of TiO2 in a solution of vinegar and sodium bicarbonate to form the TiO2 film, the use of a different indigo carmine (1.25 X 10-1mg/pill) concentration in the pill indicator of contamination, the increase of the disinfection rate through shaking the bottles, degradation under intermittent UV radiation and the effect of bottle size on photocatalytic water disinfection were among the most important findings. A new mathematical model that describes better photocatalytic water disinfection in TiO2 coated bottles and simulates water disinfection under different working conditions was another important achievement. These results can now be used to design a strategy for disseminating this technology in areas where it is required and, in that way, generate the greatest positive impact on the people needing safe drinking water.

  16. Water track distribution and effects on carbon dioxide flux in an eastern Siberian upland tundra landscape

    NASA Astrophysics Data System (ADS)

    Curasi, Salvatore R.; Loranty, Michael M.; Natali, Susan M.

    2016-04-01

    Shrub expansion in tundra ecosystems may act as a positive feedback to climate warming, the strength of which depends on its spatial extent. Recent studies have shown that shrub expansion is more likely to occur in areas with high soil moisture and nutrient availability, conditions typically found in sub-surface water channels known as water tracks. Water tracks are 5–15 m wide channels of subsurface water drainage in permafrost landscapes and are characterized by deeper seasonal thaw depth, warmer soil temperatures, and higher soil moisture and nutrient content relative to adjacent tundra. Consequently, enhanced vegetation productivity, and dominance by tall deciduous shrubs, are typical in water tracks. Quantifying the distribution of water tracks may inform investigations of the extent of shrub expansion and associated impacts on tundra ecosystem carbon cycling. Here, we quantify the distribution of water tracks and their contribution to growing season CO2 dynamics for a Siberian tundra landscape using satellite observations, meteorological data, and field measurements. We find that water tracks occupy 7.4% of the 448 km2 study area, and account for a slightly larger proportion of growing season carbon uptake relative to surrounding tundra. For areas inside water tracks dominated by shrubs, field observations revealed higher shrub biomass and higher ecosystem respiration and gross primary productivity relative to adjacent upland tundra. Conversely, a comparison of graminoid-dominated areas in water tracks and inter-track tundra revealed that water track locations dominated by graminoids had lower shrub biomass yet increased net uptake of CO2. Our results show water tracks are an important component of this landscape. Their distribution will influence ecosystem structural and functional responses to climate, and is therefore of importance for modeling.

  17. Carbon dioxide fluxes associated with synoptic weather events over a southern inland water

    NASA Astrophysics Data System (ADS)

    Liu, H.; Zhang, Q.; Gao, Z.

    2015-12-01

    Evidence indicates that inland waters play an important role in regional and global carbon budget through releasing a substantial carbon into the atmosphere. To better quantify how environmental variables affect CO2 exchange between inland waters and the atmosphere and its temporal variations, we have conducted direct, long-term measurements of CO2 fluxes across the water-atmosphere interface over a large southern open water of Ross Barnett Reservoir in central Mississippi. Our data indicate that large CO2 flux pulses occurred occasionally throughout the course of a year with the duration of a few days for each pulse. Here we analyzed and demonstrated that these CO2 flux pulses were associated with the passages of synoptic weather events. Our preliminary results indicated that these synoptic weather events (e.g., extratropical clones and cold air bursts) led to the enhanced mechanical mixing due to increasing wind speeds and the instability of the atmospheric surface layer due to the decreasing air temperature. As a consequence, in-water processes were also substantially altered accordingly. Due to the dramatic decrease in air temperature caused by the events, the temperature in the water surface layer was largely reduced, generating in-water convection conditions and thus leading to the increased depths of the mixing layer in the water, as reflected by the water temperature profiles. The enhanced mechanical mixing in the atmospheric surface layer may have further contributed to the deepened mixing layer in the water. Our suggestions suggest that high CO2 effluxes during the pulse events were largely attributed to changes in the water-side physical processes that are directly linked to rapid changes in atmospheric processes associated with synoptic weather events. Given its substantial contribution of CO2 flux pulses to carbon emission, such physical processes should be taken into account when carbon emissions from inland waters are quantified.

  18. Planning and the Energy-Water Nexus

    NASA Astrophysics Data System (ADS)

    Tidwell, V. C.; Bailey, M.; Zemlick, K.; Moreland, B.

    2015-12-01

    While thermoelectric power generation accounts for only 3-5% of the nation's consumptive use of freshwater, its future potential to exert pressure on limited water supplies is of concern given projected growth in electric power generation. The corresponding thermoelectric water footprint could look significantly different depending on decisions concerning the mix of fuel type, cooling type, location, and capacity, which are influenced by such factors as fuel costs, technology evolution, demand growth, policies, and climate change. The complex interplay among these disparate factors makes it difficult to identify where water could limit siting choices for thermoelectric generation or alternatively, thermoelectric development could limit growth in other water use sectors. These arguments point to the need for joint coordination, analysis and planning between energy and water managers. Here we report on results from a variety of planning exercises spanning scales from the national, interconnection, to the utility. Results will highlight: lessons learned from the integrated planning exercises; the broad range in potential thermoelectric water use futures; regional differences in the thermoelectric-water nexus; and, opportunities for non-traditional waters to ease competition over limited freshwater supplies and to harden thermoelectric generation against drought vulnerability. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  19. Food and energy production: Conjunctive water planning

    NASA Astrophysics Data System (ADS)

    Lorah, W. L.; Wright, K. R.

    1981-05-01

    Optimum oil production often requires secondary recovery techniques which utilize large amounts of water. Concurrent with the increased oil production is the need to provide new water diversions for increased food and fiber production. Oil production and agricultural lands are often located in the same region and compete for the same water. This paper presents one solution to this competition for a limited resource. A conjunctive water supply and treatment plan with synergistic benefits was developed to meet the energy-production water requirement (waterflooding) and the water needs for reclamation of the saline lands for food production (irrigation). A plan was devised whereby river water would be diverted onto the saline lands for treatment to remove suspended solids. The treatment process (removal of suspended sediments) at the same time would leach the soil of its dissolved solids (salts). The treated water, and the salts, would then be captured by an underground drainage system for delivery to the oil field for subsequent injection around the oil reservoir. This plan eliminated the need to construct a costly mechanical water treatment plant by using the wastewater (leachate) from the agricultural sector as an acceptable raw-water supply for the oil industry. Thus, expenses eliminated by virtue of the plan could be used to assist in a land reclamation program which otherwise might be economically impractical.

  20. The energy costs of wading in water

    PubMed Central

    Halsey, Lewis G.; Tyler, Christopher J.; Kuliukas, Algis V.

    2014-01-01

    ABSTRACT Studies measuring the energy costs of wading in water have been limited to higher walking speeds in straight lines, in deep water. However, much foraging in water, by both humans and other primates, is conducted in the shallows and at low speeds of locomotion that include elements of turning, as befits searching for cryptic or hidden foods within a patch. The present study brings together data on the rate of oxygen consumption during wading by humans from previous studies, and augments these with new data for wading in shallower depths, with slower and more tortuous walking, to obtain a better understanding both of the absolute costs of wading in typical scenarios of aquatic foraging and of how the cost of wading varies as a function of water depth and speed of locomotion. Previous and present data indicate that, at low speeds, wading has a similar energetic cost to walking on land, particularly at lower water depths, and only at higher speeds is the cost of wading noticeably more expensive than when water is absent. This is probably explained by the relatively small volume of water that must be displaced during locomotion in shallow waters coupled with the compensating support to the limbs that the water affords. The support to the limbs/body provided by water is discussed further, in the context of bipedal locomotion by non-human primates during wading. PMID:24907372

  1. Model for Planning Water-Energy Systems

    NASA Astrophysics Data System (ADS)

    Lall, Upmanu; Mays, Larry W.

    1981-08-01

    A mathematical programing model which has a nonlinear objective function and linear constraints is developed for the planning of composite regional water-energy systems and is solved using the largescale generalized reduced-gradient technique. Three interacting subsystems (the water subsystem, the power generation subsystem, and the coal and synthetic natural gas subsystem) are modeled to define the interlinked water-energy system. The objective of the model is to minimize the sum of the capital, operating, and distribution costs incurred in meeting future water, gas, coal and power demands within a region. The nonlinear objective function represents an improvement over existing models, as it permits analysis of nonlinear system response and economies of scale. The model is applied to a region located in northeastern Texas.

  2. Energy-Related Carbon Dioxide Emissions at the State Level, 2000-2013

    EIA Publications

    2015-01-01

    This analysis examines some of the factors that influence state-level carbon dioxide emissions from the consumption of fossil fuels. These factors include: the fuel mix — especially in the generation of electricity; the state climate; the population density of the state; the industrial makeup of the state and whether the state is a net exporter or importer of electricity.

  3. Carbon dioxide and water exchange of a soybean stand grown in the biomass production chamber

    NASA Technical Reports Server (NTRS)

    Corey, Kenneth A.

    1990-01-01

    Soybean plants were grown under metal halide lamps in NASA's biomass production chamber (BPC). Experiments were conducted to determine whole stand rates of carbon dioxide exchange and transpiration as influenced by time of day, CO2 concentration, irradiance, and temperature. Plants were grown at a population of 24 plants/sq m, a daily cycle of 12 hr light/12 hr dark, and average temperature regime of 26 C light/20 C dark, and a CO2 concentration enriched and maintained at 1000 ppm during the photoperiod. A distinct diurnal pattern in the rate of stand transpiration was measured at both ambient and enriched (1000 ppm) concentration of CO2. Data generated in this study represent true whole stand responses to key developmental and environmental variables and will be valuable in database construction for future working CELSS. Crop growth studies in the BPC were conducted with a high degree of environmental control, gas tightness during growth, and have used large plant stands. These characteristics have placed it in a unique position internationally as a research tool and as a preprototype subcomponent to a fully integrated CELSS. The results from the experiments are presented.

  4. Highly Transparent Dual-Sensitized Titanium Dioxide Nanotube Arrays for Spontaneous Solar Water Splitting Tandem Configuration.

    PubMed

    Shin, Kahee; Park, Jong Hyeok

    2015-08-26

    Vertically aligned one-dimensional (1D) titanium dioxide (TiO2) arrays on transparent conducting oxide (TCO) substrates, which can act as host electron transport materials for low bandgap materials, were synthesized via a hydrothermal reaction combined with a controlled chemical etching process. By controlling the chemical etching conditions, we can maximize the light transmission properties of the 1D TiO2 arrays, which is beneficial for the front electrode in photoelectrochemical (PEC) tandem configurations. As a result, dual sensitization to form 1D TiO2@CdS@CdSe (CdS and CdSe coated 1D TiO2) results in excellent photocurrent density, as well as transparency, and the resulting material is able to pass unabsorbed photons through the front electrode into the rear bias solar cell. Owing to the improved light transmission in combination with the increased specific surface area of the obtained 1D TiO2 arrays from the controlled etching process, a high-efficiency PEC tandem device with ∼2.1% was successfully fabricated for unassisted hydrogen evolution. Efficient PEC tandem device was fabricated for unassisted solar hydrogen generation using highly transparent composite electrode composed of dual sensitization to form 1D TiO2@CdS@CdSe. PMID:26266330

  5. Multimodel Predictive System for Carbon Dioxide Solubility in Saline Formation Waters

    SciTech Connect

    Wang, Zan; Small, Mitchell J; Karamalidis, Athanasios K

    2013-02-05

    The prediction of carbon dioxide solubility in brine at conditions relevant to carbon sequestration (i.e., high temperature, pressure, and salt concentration (T-P-X)) is crucial when this technology is applied. Eleven mathematical models for predicting CO{sub 2} solubility in brine are compared and considered for inclusion in a multimodel predictive system. Model goodness of fit is evaluated over the temperature range 304–433 K, pressure range 74–500 bar, and salt concentration range 0–7 m (NaCl equivalent), using 173 published CO{sub 2} solubility measurements, particularly selected for those conditions. The performance of each model is assessed using various statistical methods, including the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC). Different models emerge as best fits for different subranges of the input conditions. A classification tree is generated using machine learning methods to predict the best-performing model under different T-P-X subranges, allowing development of a multimodel predictive system (MMoPS) that selects and applies the model expected to yield the most accurate CO{sub 2} solubility prediction. Statistical analysis of the MMoPS predictions, including a stratified 5-fold cross validation, shows that MMoPS outperforms each individual model and increases the overall accuracy of CO{sub 2} solubility prediction across the range of T-P-X conditions likely to be encountered in carbon sequestration applications.

  6. Modelling biofilm growth in the presence of carbon dioxide and water flow in the subsurface

    NASA Astrophysics Data System (ADS)

    Ebigbo, Anozie; Helmig, Rainer; Cunningham, Alfred B.; Class, Holger; Gerlach, Robin

    2010-07-01

    The concentration of greenhouse gases - particularly carbon dioxide (CO 2) - in the atmosphere has been on the rise in the past decades. One of the methods which have been proposed to help reduce anthropogenic CO 2 emissions is the capture of CO 2from large, stationary point sources and storage in deep geological formations. The caprock is an impermeable geological layer which prevents the leakage of stored CO 2, and its integrity is of utmost importance for storage security. Due to the high pressure build-up during injection, the caprock in the vicinity of the well is particularly at risk of fracturing. Biofilms could be used as biobarriers which help prevent the leakage of CO 2 through the caprock in injection well vicinity by blocking leakage pathways. The biofilm could also protect well cement from corrosion by CO 2-rich brine. The goal of this paper is to develop and test a numerical model which is capable of simulating the development of a biofilm in a CO 2 storage reservoir. This involves the description of the growth of the biofilm, flow and transport in the geological formation, and the interaction between the biofilm and the flow processes. Important processes which are accounted for in the model include the effect of biofilm growth on the permeability of the formation, the hazardous effect of supercritical CO 2 on suspended and attached bacteria, attachment and detachment of biomass, and two-phase fluid flow processes. The model is tested by comparing simulation results to experimental data.

  7. Water Efficient Energy Production for Geothermal Resources

    SciTech Connect

    GTO

    2015-06-01

    Water consumption in geothermal energy development occurs at several stages along the life cycle of the plant, during construction of the wells, piping, and plant; during hydroshearing and testing of the reservoir (for EGS); and during operation of the plant. These stages are highlighted in the illustration above. For more information about actual water use during these stages, please see the back of this sheet..

  8. Methane and carbon dioxide emissions from inland waters in India - implications for large scale greenhouse gas balances.

    PubMed

    Panneer Selvam, Balathandayuthabani; Natchimuthu, Sivakiruthika; Arunachalam, Lakshmanan; Bastviken, David

    2014-11-01

    Inland waters were recently recognized to be important sources of methane (CH4 ) and carbon dioxide (CO2 ) to the atmosphere, and including inland water emissions in large scale greenhouse gas (GHG) budgets may potentially offset the estimated carbon sink in many areas. However, the lack of GHG flux measurements and well-defined inland water areas for extrapolation, make the magnitude of the potential offset unclear. This study presents coordinated flux measurements of CH4 and CO2 in multiple lakes, ponds, rivers, open wells, reservoirs, springs, and canals in India. All these inland water types, representative of common aquatic ecosystems in India, emitted substantial amounts of CH4 and a major fraction also emitted CO2 . The total CH4 flux (including ebullition and diffusion) from all the 45 systems ranged from 0.01 to 52.1 mmol m(-2)  d(-1) , with a mean of 7.8 ± 12.7 (mean ± 1 SD) mmol m(-2)  d(-1) . The mean surface water CH4 concentration was 3.8 ± 14.5 μm (range 0.03-92.1 μm). The CO2 fluxes ranged from -28.2 to 262.4 mmol m(-2)  d(-1) and the mean flux was 51.9 ± 71.1 mmol m(-2)  d(-1) . The mean partial pressure of CO2 was 2927 ± 3269 μatm (range: 400-11 467 μatm). Conservative extrapolation to whole India, considering the specific area of the different water types studied, yielded average emissions of 2.1 Tg CH4  yr(-1) and 22.0 Tg CO2  yr(-1) from India's inland waters. When expressed as CO2 equivalents, this amounts to 75 Tg CO2 equivalents yr(-1) (53-98 Tg CO2 equivalents yr(-1) ; ± 1 SD), with CH4 contributing 71%. Hence, average inland water GHG emissions, which were not previously considered, correspond to 42% (30-55%) of the estimated land carbon sink of India. Thereby this study illustrates the importance of considering inland water GHG exchange in large scale assessments. PMID:24623552

  9. Influence of water table on carbon dioxide, carbon monoxide, and methane fluxes from taiga bog microcosms

    SciTech Connect

    Funk, D.W.; Pullmann, E.R.; Peterson, K.M.

    1994-09-01

    Hydrological changes, particularly alterations in water table level, may largely overshadow the more direct effects of global temperature increase upon carbon cycling in arctic and subarctic wetlands. Frozen cores (n=40) of intact soils and vegetation were collected from a bog near Fairbanks, Alaska, and fluxes of CO{sub 2}, CH{sub 4}, and Co in response to water table variation were studied under controlled conditions in the Duke University phytotron. Core microcosms thawed to a 20-cm depth over 30 days under a 20 hour photoperiod with a day/night temperature regime of 20/10{degrees}C. After 30 days the water table in 20 microcosms was decreased from the soil surface to -15 cm and maintained at the soil surface in 20 control cores. Outward fluxes of CO{sub 2} (9-16 g m{sup -2}d{sup -1}) and CO (3-4 mg m{sup -2}d{sup -1}) were greatest during early thaw and decreased to near zero for both gases before the water table treatment started. Lower water table tripled CO{sub 2} flux to the atmosphere when compared with control cores. Carbon monoxide was emitted at low rates from high water table cores and consumed by low water table cores. Methane fluxes were low (<1 mg m{sup -2}d{sup -1}) in all cores during thaw. High water table cores increased CH{sub 4} flux to 8-9 mg m{sup -2}d{sup -1} over 70 days and remained high relative to the low water table cores (<0.74 mg m{sup -2}d{sup -1}). Although drying of wetland taiga soils may decrease CH{sub 4} emissions to the atmosphere, the associated increase in CO{sub 2} due to aerobic respiration will likely increase the global warming potential of gas emissions from these soils. 43 refs., 4 figs.

  10. The use of seawater as a carbon dioxide scrubbing medium for underwater life support

    SciTech Connect

    Nuckols, M.L.

    1996-09-01

    Experimental evidence suggests that seawater could be used to scrub carbon dioxide form cabin air in underwater habitats. Seawater has the capacity to absorb carbon dioxide in quantities directly dependent on a number of variables, the most significant of which is the partial pressure of the carbon dioxide in the gas. The absorption capacities of freshwater and seawater are determined in this study in relation to the variables of carbon dioxide partial pressure, water temperature and pH for use in simple engineering design calculations. A conceptual carbon dioxide scrubber is proposed which involves the direct absorption of carbon dioxide in small concentrations in diffused air by a pressurized seawater tower. This conceptual design can potentially offer a low-energy seawater carbon dioxide scrubber to be externally or internally mounted on an underwater habitat.

  11. System for harvesting water wave energy

    DOEpatents

    Wang, Zhong Lin; Su, Yanjie; Zhu, Guang; Chen, Jun

    2016-07-19

    A generator for harvesting energy from water in motion includes a sheet of a hydrophobic material, having a first side and an opposite second side, that is triboelectrically more negative than water. A first electrode sheet is disposed on the second side of the sheet of a hydrophobic material. A second electrode sheet is disposed on the second side of the sheet of a hydrophobic material and is spaced apart from the first electrode sheet. Movement of the water across the first side induces an electrical potential imbalance between the first electrode sheet and the second electrode sheet.

  12. Effect of elevated carbon dioxide and water stress on gas exchange and water use efficiency in corn

    Technology Transfer Automated Retrieval System (TEKTRAN)

    [CO2] has been predicted to increase in the future, and thus leading to possible changes in precipitation patterns. The objectives of this study were to investigate water use and canopy level photosynthesis of corn plants, and to quantify water use efficiency in corn plants under two different [CO2]...

  13. Carbon dioxide and light responses of photosynthesis in cowpea and pigeonpea during water deficit and recovery

    SciTech Connect

    Lopez, F.B.; Setter, T.L.; McDavid, C.R.

    1987-10-01

    Greenhouse-grown pigeonpea (Cajunus cajan, (L.)) and cowpea (Vigna unguiculata, (L.)) were well-watered or subjected to low water potential by withholding water to compare their modes of adaptation to water-limited conditions. Leaf CO/sub 2/ exchange rate (CER), leaf diffusive conductance to CO/sub 2/ (g/sub L/), and CO/sub 2/ concentration in the leaf intercellular air space (C/sub i/) were determined at various CO/sub 2/ concentrations and photon flux densities (PFD) of photosynthetically active radiation. In cowpea, g/sub L/ declined to less than 15% of controls and total water potential (Psi/sub w/) at midafternoon declined to -0.8 megapascal after 5 days of withholding water, whereas g/sub L/ in pigeonpea was about 40% of controls even though midafternoon Psi/sub w/ was -1.9 megapascal. After 8 days of withholding water, Psi/sub w/ at midafternoon decline to -0.9 and -2.4 megapascals in cowpea and pigeonpea, respectively. The solute component of water potential (Psi/sub s/) decreased substantially less in cowpea than pigeonpea. Photosynthetic CER at saturation photon flux density (PFD) and ambient external CO/sub 2/ concentration on day 5 of withholding decreased by 83 and 55% in cowpea and pigeonpea, respectively. When measured at external, CO/sub 2/ concentration in bulk air of 360 microliters per liter, the CER of cowpea had fully recovered to control levels 3 days after rewatering; however, at 970 microliters per liter the PFD-saturated CERS of both species were substantially lower than in controls, indicating residual impairment.

  14. Super-efficient surfactant for stabilizing water-in-carbon dioxide microemulsions.

    PubMed

    Sagisaka, Masanobu; Iwama, Shuho; Hasegawa, Satoshi; Yoshizawa, Atsushi; Mohamed, Azmi; Cummings, Stephen; Rogers, Sarah E; Heenan, Richard K; Eastoe, Julian

    2011-05-17

    The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions. PMID:21486003

  15. Formulation effects on the release of silica dioxide nanoparticles from paint debris to water.

    PubMed

    Zuin, Stefano; Massari, Andrea; Ferrari, Arlen; Golanski, Luana

    2014-04-01

    Waterborne paints with integrated nanoparticles have been recently introduced into the market as nanoparticles offer improved or novel functionalities to paints. However, the release of nanoparticles during the life cycle of nano-enhanced paint has only been studied to a very limited extent. The paint composition could determine in what quantities and forms the nanoparticles are released. In this work, paint formulations containing the same amount of silicon dioxide (SiO2) nanoparticles but differing in the pigment volume concentration (PVC) and in amount and type of binder and pigment, were studied through leaching test to investigate the influence of these parameters on release of Si from paint. The results indicate greater release of Si, about 1.7 wt.% of the SiO2 nanoparticles in the paint, for paint formulated with higher PVC value (63%), suggesting that the PVC is a crucial factor for release of SiO2 nanoparticles from paints. This hypothesis was also based on the fact that agglomerates of SiO2 nanoparticles were only found in leachates from paint with higher PVC. A paint sample with the higher amount of binder and less calcite filler exhibited a lower release of Si among the paints with a low PVC value (35%), and no SiO2 particles were detected in leachates collected from this paint. This could be due to the fact that a high portion of binder forms a suitable matrix to hold the SiO2 ENPs in paint. The paint sample in which the amount of calcite was partially substituted with TiO2 pigment did not show an important reduction on Si release. Our work suggests that paint debris containing SiO2 nanoparticles may release a limited amount of Si into the environment, and that by adjusting the properties of the binder in combination with common pigments it is possible to reduce the release of SiO2 nanoparticles. PMID:24468504

  16. GEWEX Water and Energy Budget Study

    NASA Technical Reports Server (NTRS)

    Roads, J.; Bainto, E.; Masuda, K.; Rodell, Matthew; Rossow, W. B.

    2008-01-01

    Closing the global water and energy budgets has been an elusive Global Energy and Water-cycle Experiment (GEWEX) goal. It has been difficult to gather many of the needed global water and energy variables and processes, although, because of GEWEX, we now have globally gridded observational estimates for precipitation and radiation and many other relevant variables such as clouds and aerosols. Still, constrained models are required to fill in many of the process and variable gaps. At least there are now several atmospheric reanalyses ranging from the early National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) and NCEP/Department of Energy (DOE) reanalyses to the more recent ERA40 and JRA-25 reanalyses. Atmospheric constraints include requirements that the models state variables remain close to in situ observations or observed satellite radiances. This is usually done by making short-term forecasts from an analyzed initial state; these short-term forecasts provide the next guess, which is corrected by comparison to available observations. While this analysis procedure is likely to result in useful global descriptions of atmospheric temperature, wind and humidity, there is no guarantee that relevant hydroclimate processes like precipitation, which we can observe and evaluate, and evaporation over land, which we cannot, have similar verisimilitude. Alternatively, the Global Land Data Assimilation System (GLDAS), drives uncoupled land surface models with precipitation, surface solar radiation, and surface meteorology (from bias-corrected reanalyses during the study period) to simulate terrestrial states and surface fluxes. Further constraints are made when a tuned water balance model is used to characterize the global runoff observational estimates. We use this disparate mix of observational estimates, reanalyses, GLDAS and calibrated water balance simulations to try to characterize and close global and terrestrial atmospheric

  17. Energy transduction inside vesicles, photocatalysis by titanium dioxide and formation of NADH

    NASA Astrophysics Data System (ADS)

    Summers, David; Noveron, Juan; Rodoni, David; Basa, Ranor

    A number of theories on the origin and early evolution of life have focused on the role of lipid bilayer membrane structures (vesicles). These vesicles are similar to modern cellular membranes , and have been postulated to have been abiotically formed and spontaneously assemble on the prebiotic Earth to provide compartments for early cellular life. They can contain water-soluble species, concentrate species, and have the potential to catalyze reactions. The origin of the use of photochemical energy to drive metabolism (ie. energy transduction) is also one of the central issues in our attempts to understand the origin and evolution of life. When did energy transduction and photosynthesis begin? What was the original system for capturing photochemical energy? How simple can such a system be? It has been postulated that vesicle structures developed the ability to capture and transduce light, providing energy for reactions. It has been shown that pH gradients can be photo-chemically created, but it has been found difficult to couple these to drive chemical reactions. Minerals can introduce a number of properties to a vesicle system. The incorporation of clay particles into vesicles can provide catalytic activity that mediates both vesicle assembly and RNA oligomerization. It is known that colloidal semiconducting mineral particles can act as photocatalysts and drive redox chemistry. We show that encapsulation of these particles has the potential to provide a source of energy transduction inside vesicles, and thereby drive protocellular chemistry and represent a model system for early photosynthesis. TiO2 particles can be incorporated into vesicles and retain their photoactivity through the dehydration/rehydration cycles that have been shown to be able concentrate species inside a vesicle. It is shown that these can be used to produce biochemical species such as enzymatically active NADH in such structures. This system demonstrates a simple energy source inside vesicles

  18. Army Energy and Water Reporting System Assessment

    SciTech Connect

    Deprez, Peggy C.; Giardinelli, Michael J.; Burke, John S.; Connell, Linda M.

    2011-09-01

    There are many areas of desired improvement for the Army Energy and Water Reporting System. The purpose of system is to serve as a data repository for collecting information from energy managers, which is then compiled into an annual energy report. This document summarizes reported shortcomings of the system and provides several alternative approaches for improving application usability and adding functionality. The U.S. Army has been using Army Energy and Water Reporting System (AEWRS) for many years to collect and compile energy data from installations for facilitating compliance with Federal and Department of Defense energy management program reporting requirements. In this analysis, staff from Pacific Northwest National Laboratory found that substantial opportunities exist to expand AEWRS functions to better assist the Army to effectively manage energy programs. Army leadership must decide if it wants to invest in expanding AEWRS capabilities as a web-based, enterprise-wide tool for improving the Army Energy and Water Management Program or simply maintaining a bottom-up reporting tool. This report looks at both improving system functionality from an operational perspective and increasing user-friendliness, but also as a tool for potential improvements to increase program effectiveness. The authors of this report recommend focusing on making the system easier for energy managers to input accurate data as the top priority for improving AEWRS. The next major focus of improvement would be improved reporting. The AEWRS user interface is dated and not user friendly, and a new system is recommended. While there are relatively minor improvements that could be made to the existing system to make it easier to use, significant improvements will be achieved with a user-friendly interface, new architecture, and a design that permits scalability and reliability. An expanded data set would naturally have need of additional requirements gathering and a focus on integrating

  19. Bisphosphine dioxides

    SciTech Connect

    Moloy, K.G.

    1990-02-20

    A process is described for the production of organic bisphosphine dioxides from organic bisphosphonates. The organic bisphosphonate is reacted with a Grignard reagent to give relatively high yields of the organic bisphosphine dioxide.

  20. Bisphosphine dioxides

    DOEpatents

    Moloy, Kenneth G.

    1990-01-01

    A process for the production of organic bisphosphine dioxides from organic bisphosphonates. The organic bisphosphonate is reacted with a Grignard reagent to give relatively high yields of the organic bisphosphine dioxide.

  1. Carbon Dioxide Extraction from the Atmosphere Through Engineered Chemical Sinkage: Enabling Energy and Environmental Security

    NASA Astrophysics Data System (ADS)

    Dubey, M. K.; Ziock, H.; Rueff, G.; Smith, W. S.; Colman, J.; Elliott, S.; Lackner, K.; Johnston, N. A.

    2002-05-01

    We present the case for carbon dioxide (CO2) extraction from air using engineered chemical sinks as a means of sustaining fossil energy use by avoiding climate change. Existing carbon sequestration strategies such as CO2 injection into geologic formations or the deep ocean and mineral carbonation, require a pure stream of concentrated CO2 to be viable. Furthermore, current emphasis on reducing the global CO2 emissions is on large centralized power plants. However, more than half of all emissions are from the transportation sector and small, distributed sources such as home heating, etc. Most solutions for dealing with these sources explicitly or implicitly entail completely overhauling the existing infrastructure. To solve these problems, Los Alamos National Laboratory has conceived a novel approach for directly extracting CO2 from the atmosphere. Direct extraction converts the dilute CO2 (370 parts per million) in the atmosphere into a pure CO2 stream ready for permanent sequestration. It provides the following advantages: (1) Preserves our existing energy use and fuel distribution systems, which represent a large investment, (2) Indirectly captures CO2 from the myriad of small, distributed, and mobile sources that otherwise are not accessible to sequestration, (3) Allows atmospheric CO2 levels to be restored to their pre-industrial age value, (4) Provides free transport of CO2 to suitable sequestration sites by using natural atmospheric circulation, and (5) Is relatively compact and therefore inexpensive when compared to renewable concepts. Our concept harnesses atmospheric circulation to transport CO2 to sites where the CO2 is extracted by binding it to an adsorbent. The bound CO2 is then recovered as pure gas by heating together with the solid adsorbent that is recycled. As a proof of concept, we show that an aqueous Ca(OH)2 solution efficiently converts CO2 to a CaCO3 solid that can be heated to obtain pure CO2 and recover the CaO. Even with recycling costs

  2. Water quality issues and energy assessments

    SciTech Connect

    Davis, M.J.; Chiu, S.

    1980-11-01

    This report identifies and evaluates the significant water quality issues related to regional and national energy development. In addition, it recommends improvements in the Office assessment capability. Handbook-style formating, which includes a system of cross-references and prioritization, is designed to help the reader use the material.

  3. Carbon dioxide along WOCE line A14: Water masses characterization and anthropogenic entry

    SciTech Connect

    Rios, A F; Alvarez-Salgado, X A; Perez, F F; Bingler, Linda S; Aristegui, J; Memery, L

    2003-04-22

    The meridional WOCE line A14, just east of the South Atlantic Mid-Atlantic Ridge, was surveyed during the austral summer of 1995 from 4°N to 45°S. Full-depth profiles of pH, total alkalinity (TA), and total inorganic carbon (CT) were measured, allowing a test of the internal consistency of the CO2 system parameters. The correlation between CT measured and calculated from pH and TA was very good (r2 = 0.998), with an insignificant average difference of 0.1 μ3.0 μmol kg-1 (n = 964 data). CO2 certified reference materials (CRMs) and a collection of selected samples subsequently analyzed at the Scripps Institution of Oceanography were used to assess the accuracy of our measurements at sea with satisfactory results. The three measured CO2 system variables were then used to identify the characteristic array of zonal flows throughout the South Atlantic intersected by A14. Equatorial, subequatorial, subtropical, and subantarctic domains were identified at the depth range of the surface water, South Atlantic Central Water (SACW), Antarctic Intermediate Water (AAIW), Upper Circumpolar Water (UCPW), North Atlantic Deep Water (NADW) and Antarctic Bottom Water (AABW). The nonconservative CO2 system parameters (pH, TA, CT) have been useful in identifying the transition from aged subequatorial to ventilated subtropical surface, central and intermediate waters. They have been identified as good tracers of the zonal circulation of NADW, with marked flows at the equator, 13°S, and 22°S (the "Namib Col Current") and the sharp transition from UNADW to UCPW at 23°S. The anthropogenic CO2 inventory (CANT) was estimated and compared with CFC-derived apparent ages for different water masses along A14. The anthropogenic entry reached maximum in the relatively young and ventilated subantarctic and subtropical domains where AAIW was the most efficient CO2 trap. The calculated annual rate of CANT entry by AAIW was 0.82 μmol kg-1 y-1, in agreement with the annual rate estimated from

  4. INTRASEASONAL VARIATION IN WATER AND CARBON DIOXIDE FLUX COMPONENTS IN A SEMIARID RIPARIAN WOODLAND 1874

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We investigated how the distribution of precipitation over a growing season influenced the interaction between the carbon and water cycles of a semiarid riparian woodland dominated by mesquite trees (Prosopis velutina). We found that in this ecosystem where the trees access groundwater, gross ecosys...

  5. RADIUM REMOVAL FROM WATER BY MANGANESE DIOXIDE ADSORPTION AND DIATOMACEOUS EARTH FILTRATION

    EPA Science Inventory

    This study reveals that radium adsorption onto precipitated MNO2 followed by diatomaceous earth (DE) filtration is a very effective treatment process for radium-contaminated water. adium removals in the range of 80% to 97% were observed for performed MnO2 feed concentrations of 0...

  6. Conversion of an Aziridine to an Oxazolidinone Using a Salt and Carbon Dioxide in Water

    ERIC Educational Resources Information Center

    Wallace, Justin R.; Lieberman, Deborah L.; Hancock, Matthew T.; Pinhas, Allan R.

    2005-01-01

    A convenient, inexpensive, environment friendly, and regioselective conversion of an aziridine to an oxazolidinone is developed by using iodide salt and CO[2] in water. A description is provided, on the way in which this series of experiments will show students how to change experimental conditions to obtain mainly one desired regiosomer of a…

  7. RADIUM REMOVAL FROM WATER MANGANESE DIOXIDE ADSORP- TION AND DIATOMACEOUS EARTH FILTRATION

    EPA Science Inventory

    The study reveals that radium adsorption onto precipitated MnO2 followed by diatomaceous earth (DE) filtration is a very effective treatment process for radium-contaminated water. Radium removals in the range of 80% to 97% were observed for performed MnO2 feed concentrations of 0...

  8. Limestone-particle-stabilized macroemulsion of liquid and supercritical carbon dioxide in water for ocean sequestration.

    PubMed

    Golomb, D; Barry, E; Ryan, D; Lawton, C; Swett, P

    2004-08-15

    When liquid or supercritical CO2 is mixed with an aqueous slurry of finely pulverized (1-20 microm) limestone (CaCO3) in a high-pressure reactor, a macroemulsion is formed consisting of droplets of CO2 coated with a sheath of CaCO3 particles dispersed in water. The coated droplets are called globules. Depending on the globule diameter and the CaCO3 sheath thickness, the globules sink to the bottom of the water column, are neutrally buoyant, or float on top of the water. The CaCO3 particles are lodged at the CO2/ H2O interface, preventing the coalescence of the CO2 droplets, and thus stabilizing the CO2-in-water emulsion. We describe the expected behavior of a CO2/H2O/CaCO3 emulsion plume released in the deep ocean for sequestration of CO2 in the ocean to ameliorate global warming. Depending on the amount of CO2 injected, the dense plume will descend a few hundred meters while entraining ambient seawater until it acquires neutral buoyancy in the stratified ocean. After equilibration, the globules will rain out from the plume toward the ocean bottom. This mode of CO2 release will prevent acidification of the seawater around the release point, which is a major environmental drawback of ocean sequestration of liquid, unemulsified CO2. PMID:15382876

  9. Impact of titanium dioxide nanoparticles on the bacterial communities of biological activated carbon filter intended for drinking water treatment.

    PubMed

    Zhiyuan, Liu; Shuili, Yu; Heedeung, Park; Qingbin, Yuan; Guicai, Liu; Qi, Li

    2016-08-01

    Titanium dioxide nanoparticles (TiO2 NPs) are inevitably present in the aquatic environment owing to their increasing production and use. However, knowledge of the potential effects of TiO2 NPs on the treatment of drinking water is scarce. Herein, the effects of two types of anatase TiO2 NPs (TP1, 25 nm; TP2, 100 nm) on the bacterial community in a biological activated carbon (BAC) filter were investigated via quantitative polymerase chain reaction (Q-PCR) analysis, ATP quantification, and 454 pyrosequencing analysis. Both TP1 and TP2 significantly inhibited the bacterial ATP level (p < 0.01) and induced a decrease in the abundance of bacterial 16S rDNA gene copies at doses of 0.1 and 100 mg L(-1). Simultaneously, the diversity and evenness of the bacterial communities were considerably reduced. The relative abundances of bacteria annotated to OTUs from Nitrospira class and Betaproteobacteria class decreased upon TiO2 NP treatment, whereas those of Bacilli class and Gammaproteobacteria class increased. TiO2 NP size showed a greater effect on the bacterial composition than did the dose based on Bray-Curtis distances. These findings identified negative effects of TiO2 NPs on the bacterial community in the BAC filter. Given the fact that BAC filters are used widely in drinking water treatment plants, these results suggested a potential threat by TiO2 NP to drinking water treatment system. PMID:27126871

  10. Design of advanced fibrous based material systems to meet the critical challenges in water quality and carbon dioxide mitigation

    NASA Astrophysics Data System (ADS)

    Nangmenyi, Gordon

    Water purification and global warming mitigation represent two of the major challenges in the 21st century. The research presented in this dissertation will describe the development of advanced fibrous systems that exhibit excellent performance in addressing the issues of water disinfection, carbon dioxide capture, and natural organic matter (NOM) removal from water. Total eradication of E. coli was achieved with fiberglass impregnated with either silver (FG-Ag), iron oxide (Fe2O3 ) modified with Ag (FG-F2O3/Ag) or copper oxide (CuO) modified with Ag (FG-CuO/Ag). The Ag modified oligodynamic nanoparticle impregnated fiberglass displayed excellent kinetic inactivation performance with extended capacity at a much lower amount of nanoparticle loading. The results support their immediate applicability in the field from a utility and cost perspective. The polyethyleneimine coated glass fibers (PEFA) for CO2 removal displayed high capacity for CO2 adsorption, up to 440 mg-CO 2/g while providing a mechanically durable and recyclable system for CO2 capture. The system offers the potential for CO2 utilization from the adsorbed CO2 from a power plant or closed environment (submarine, space shuttles or control rooms). Aminated polyacrylonitrile activated carbon fibers (N-ACF) coated on a non-woven fiberglass mat, displayed the ability to remove NOM more efficiently than granulated activated carbon or ion exchange beads at concentrations below 50 mg/L. Electrostatic attraction was found to be the dominant mechanism of NOM adsorption for the N-ACF.

  11. Comparative study of water and carbon dioxide adsorption on CuFeO2 and CuFe1-xGaxO2 highly epitaxial thin films

    NASA Astrophysics Data System (ADS)

    Rojas, S.; Joshi, T.; Borisov, P.; Lederman, D.; Cabrera, A. L.

    Thermal programmed desorption (TPD) of CO2 and H2O from a 200 nm thick CuFeO2 and 52 nm thick CuFe1-xGaxO2 delafossite surfaces was performed in a Ultra-high vacuum (UHV) chamber. The thin films with epitaxial quality were grown by Pulsed Laser Deposition (PLD) on Al2O3 (0001) substrates . The adsorption / desorption of CO2 and H2O process was also monitored with X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES). Our results revealed that carbon dioxide is preferentially chemisorbed by CuFe1-xGaxO2 over water and we observed the opposite behavior with regard to chemisorption of CO2 and H2O over CuFeO2. Hydroxyls and metal carbonates were formed on the surface due to the chemisorption of H2O and CO2. Arrhenius plots for CO2 and H2O desorption were done and activation energy for desorption were obtained. Supported by FONDECyT 1130372.

  12. Coupling geothermal energy capture with carbon dioxide sequestration in naturally permeable, porous geologic formations -- a novel approach for expanding geothermal energy utilization

    NASA Astrophysics Data System (ADS)

    Randolph, Jimmy Bryan

    This thesis research presents a new method to harness geothermal energy by combining it with geologic carbon dioxide (CO2) sequestration. CO2 is injected into deep, naturally porous and permeable geologic formations. The geothermally heated CO2 is piped to the surface, used to produce electricity, and then returned to the subsurface. This new approach represents a radical shift in electric/heat power generation as it not only utilizes a renewable energy source but has a negative carbon footprint. This research explores the potential and applicability of the approach and related aspects of geologic fluid and heat flow.

  13. Molecular Multipole Potential Energy Functions for Water.

    PubMed

    Tan, Ming-Liang; Tran, Kelly N; Pickard, Frank C; Simmonett, Andrew C; Brooks, Bernard R; Ichiye, Toshiko

    2016-03-01

    Water is the most common liquid on this planet, with many unique properties that make it essential for life as we know it. These properties must arise from features in the charge distribution of a water molecule, so it is essential to capture these features in potential energy functions for water to reproduce its liquid state properties in computer simulations. Recently, models that utilize a multipole expansion located on a single site in the water molecule, or "molecular multipole models", have been shown to rival and even surpass site models with up to five sites in reproducing both the electrostatic potential around a molecule and a variety of liquid state properties in simulations. However, despite decades of work using multipoles, confusion still remains about how to truncate the multipole expansions efficiently and accurately. This is particularly important when using molecular multipole expansions to describe water molecules in the liquid state, where the short-range interactions must be accurate, because the higher order multipoles of a water molecule are large. Here, truncation schemes designed for a recent efficient algorithm for multipoles in molecular dynamics simulations are assessed for how well they reproduce results for a simple three-site model of water when the multipole moments and Lennard-Jones parameters of that model are used. In addition, the multipole analysis indicates that site models that do not account for out-of-plane electron density overestimate the stability of a non-hydrogen-bonded conformation, leading to serious consequences for the simulated liquid. PMID:26562223

  14. Evaluation of the rate of uptake of nitrogen dioxide by atmospheric and surface liquid water

    SciTech Connect

    Lee, Y.; Schwartz, S.E.

    1981-12-20

    The rate of uptake of NO/sub 2/ by liquid water according to (R1), 2NO/sub 2/(g)+H/sub 2/O(l)..-->..2H+NO/sub 3//sup -/+NO/sub 2//sup -/, is shown to be unaffected by O/sub 2/(0.2 atm). Hence the rate constant and Henry's law solubility constant of NO/sub 2/ previously obtained may be employed to evaluate the rates of aqueous phase reactions of NO/sub 2/ in the ambient atmosphere. Reactions (R1) and (R2), NO/sub 2/(g)+NO(g)+H/sub 2/O(l)..-->..2H/sup +/+2NO/sub 2//sup -/, are quite slow at representative atmospheric partial pressures and cloud liquid water content; the characteristic times range upward from 10/sup 3/--10/sup 4/ hours at 10/sup -7/ atm, increasing with decreasing partial pressures of the gases. Direct acidification of cloud liquid water by (R1) or (R2) is also unimportant. Catalytic enhancement of (R1) is potentially important for catalyst concentrations of order 10/sup -7/ M, assuming sufficiently fast rate constants (approx.10/sup 8/ M/sup -1/s/sup -1/). Iron-catalyzed reaction in particular, however, is found to be unimportant. Reaction of NO/sub 2/ with dissolved S(IV) is potentially important, based upon an assumed upper limit rate constant of 2.5 x 10/sup 7/ M/sup -1/ s/sup -1/. Deposition of NO/sub 2/ to surface (ocean or lake) water is shown to be controlled by aqueous phase mass transport and/or reaction and is much slower than heretofore assumed.

  15. GCIP water and energy budget synthesis (WEBS)

    USGS Publications Warehouse

    Roads, J.; Lawford, R.; Bainto, E.; Berbery, E.; Chen, S.; Fekete, B.; Gallo, K.; Grundstein, A.; Higgins, W.; Kanamitsu, M.; Krajewski, W.; Lakshmi, V.; Leathers, D.; Lettenmaier, D.; Luo, L.; Maurer, E.; Meyers, T.; Miller, D.; Mitchell, Ken; Mote, T.; Pinker, R.; Reichler, T.; Robinson, D.; Robock, A.; Smith, J.; Srinivasan, G.; Verdin, K.; Vinnikov, K.; Vonder, Haar T.; Vorosmarty, C.; Williams, S.; Yarosh, E.

    2003-01-01

    As part of the World Climate Research Program's (WCRPs) Global Energy and Water-Cycle Experiment (GEWEX) Continental-scale International Project (GCIP), a preliminary water and energy budget synthesis (WEBS) was developed for the period 1996-1999 fromthe "best available" observations and models. Besides this summary paper, a companion CD-ROM with more extensive discussion, figures, tables, and raw data is available to the interested researcher from the GEWEX project office, the GAPP project office, or the first author. An updated online version of the CD-ROM is also available at http://ecpc.ucsd.edu/gcip/webs.htm/. Observations cannot adequately characterize or "close" budgets since too many fundamental processes are missing. Models that properly represent the many complicated atmospheric and near-surface interactions are also required. This preliminary synthesis therefore included a representative global general circulation model, regional climate model, and a macroscale hydrologic model as well as a global reanalysis and a regional analysis. By the qualitative agreement among the models and available observations, it did appear that we now qualitatively understand water and energy budgets of the Mississippi River Basin. However, there is still much quantitative uncertainty. In that regard, there did appear to be a clear advantage to using a regional analysis over a global analysis or a regional simulation over a global simulation to describe the Mississippi River Basin water and energy budgets. There also appeared to be some advantage to using a macroscale hydrologic model for at least the surface water budgets. Copyright 2003 by the American Geophysical Union.

  16. Carbon dioxide and water fluxes from switchgrass managed for bioenergy production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Switchgrass (Panicum virgatum L.) is an important bioenergy crop with the potential to provide a reliable supply of renewable energy while also removing CO2 from the atmosphere and sequestering it in the soil. The purpose of this study was to use micrometeorological techniques to quantify CO2 fluxes...

  17. Light energy dissipation under water stress conditions

    SciTech Connect

    Stuhlfauth, T.; Scheuermann, R.; Fock, H.P. )

    1990-04-01

    Using {sup 14}CO{sub 2} gas exchange and metabolite analyses, stomatal as well as total internal CO{sub 2} uptake and evolution were estimated. Pulse modulated fluorescence was measured during induction and steady state of photosynthesis. Leaf water potential of Digitalis lanata EHRH. plants decreased to {minus}2.5 megapascals after withholding irrigation. By osmotic adjustment, leaves remained turgid and fully exposed to irradiance even at severe water stress. Due to the stress-induced reduction of stomatal conductance, the stomatal CO{sub 2} exchange was drastically reduced, whereas the total CO{sub 2} uptake and evolution were less affected. Stomatal closure induced an increase in the reassimilation of internally evolved CO{sub 2}. This CO{sub 2}-recycling consumes a significant amount of light energy in the form of ATP and reducing equivalents. As a consequence, the metabolic demand for light energy is only reduced by about 40%, whereas net photosynthesis is diminished by about 70% under severe stress conditions. By CO{sub 2} recycling, carbon flux, enzymatic substrate turnover and consumption of light energy were maintained at high levels, which enabled the plant to recover rapidly after rewatering. In stressed D. lanata plants a variable fluorescence quenching mechanism, termed coefficient of actinic light quenching, was observed. Besides water conservation, light energy dissipation is essential and involves regulated metabolic variations.

  18. Acquiring water for energy: institutional aspects

    SciTech Connect

    Weatherford, G.; Nardi, K.; Osterhoudt, F.; Roach, F.

    1982-01-01

    This book provides basic information about the legal, political and social constraints faced by energy developers in the acquisition of water. It is a guide to those institutional constraints which are general and pronounced enough to be important for regional assessments. It is not a manual for facility siting or site-specific assessments. Only the acquisition phase of the water use cycle is emphasized. The study focuses primarily on legal constraints and secondarily on political constraints, because they tend to encompass or reflect other forms of institutional constraints such as economic ones. 11 figures, 9 tables.

  19. Field Performance Verification of Carbon Dioxide, Water, and Nitrous Oxide Closed-Path Eddy Covariance Systems with Vortex Intakes

    NASA Astrophysics Data System (ADS)

    Burgon, R. P., Jr.; Sargent, S.; Zha, T.; Jia, X.

    2015-12-01

    Closed-path eddy covariance systems measure the flux of greenhouse gasses such as carbon dioxide, water vapor, and nitrous oxide. The challenge is to make accurate field measurements at sites around the world, even in extreme environmental conditions. Sites with dirty air present a particular challenge. Gas concentration measurements may be degraded as dust or debris is deposited on the optical windows in the sample cell. The traditional solution has been to add an in-line filter upstream of the sample cell to keep the windows clean. However, these filters clog over time and must be changed periodically. An in-line filter also acts as a mixing volume and in some cases limits the frequency response of the analyzer. A novel eddy-covariance system that includes a vortex air cleaner at the inlet has been developed and field tested. This new system eliminates the need for a traditional in-line filter to keep the sample cell windows clean. The new system reduces system maintenance and down time. Eddy covariance systems with the vortex intake were tested at several sites ranging from sites with extremely dirty urban air to sites with relatively clean mountain air, and in agricultural areas. These flux systems were monitoring either CO2 and H2O, or N2O. Results show that the closed-path eddy covariance systems with a vortex intake perform very well and require lower maintenance compared to similar systems with in-line filters.

  20. Disinfection of titanium dioxide nanotubes using super-oxidized water decrease bacterial viability without disrupting osteoblast behavior.

    PubMed

    Beltrán-Partida, Ernesto; Valdez-Salas, Benjamín; Escamilla, Alan; Curiel, Mario; Valdez-Salas, Ernesto; Nedev, Nicola; Bastidas, Jose M

    2016-03-01

    Amorphous titanium dioxide (TiO2) nanotubes (NTs) on Ti6Al4V alloy were synthesized by anodization using a commercially available super-oxidized water (SOW). The NT surfaces were sterilized by ultraviolet (UV) irradiation and disinfected using SOW. The adhesion and cellular morphology of pig periosteal osteoblast (PPO) cells and the behavior of Staphylococcus aureus (S. aureus) cultured on the sterilized and disinfected surfaces were investigated. A non-anodized Ti6Al4V disc sterilized by UV irradiation (without SOW) was used as control. The results of this study reveal that the adhesion, morphology and filopodia development of PPO cells in NTs are dramatically improved, suggesting that SOW cleaning may not disrupt the benefits obtained by NTs. Significantly decreased bacterial viability in NTs after cleaning with SOW and comparing with non-cleaned NTs was seen. The results suggest that UV and SOW could be a recommendable method for implant sterilization and disinfection without altering osteoblast behavior while decreasing bacterial viability. PMID:26706527

  1. Application of water-insoluble polymers to orally disintegrating tablets treated by high-pressure carbon dioxide gas.

    PubMed

    Ito, Yoshitaka; Maeda, Atsushi; Kondo, Hiromu; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

    2016-09-10

    The phase transition of pharmaceutical excipients that can be induced by humidifying or heating is well-known to increase the hardness of orally disintegrating tablets (ODTs). However, these conditions are not applicable to drug substances that are chemically unstable against such stressors. Here, we describe a system which enhances the hardness of tablets containing water-insoluble polymers by using high-pressure carbon dioxide (CO2). On screening of 26 polymeric excipients, aminoalkyl methacrylate copolymer E (AMCE) markedly increased tablet hardness (+155N) when maintained in a high-pressure CO2 environment. ODTs containing 10% AMCE were prepared and treatment with 4.0MPa CO2 gas at 25°C for 10min increased the hardness to +30N, whose level corresponded to heating at 70°C for 720min. In addition, we confirmed the effects of CO2 pressure, temperature, treatment time, and AMCE content on the physical properties of ODTs. Optimal pressure of CO2 gas was considered to be approximately 3.5MPa for an AMCE formula, as excessive pressure delayed the disintegration of ODTs. Combination of high-pressure CO2 gas and AMCE is a prospective approach for increasing the tablet hardness for ODTs, and can be conducted without additional heat or moisture stress using a simple apparatus. PMID:27374202

  2. Contribution of Ebullition to Methane and Carbon Dioxide Emission from Water between Plant Rows in a Tropical Rice Paddy Field.

    PubMed

    Komiya, Shujiro; Noborio, Kosuke; Katano, Kentaro; Pakoktom, Tiwa; Siangliw, Meechai; Toojinda, Theerayut

    2015-01-01

    Although bubble ebullition through water in rice paddy fields dominates direct methane (CH4) emissions from paddy soil to the atmosphere in tropical regions, the temporal changes and regulating factors of this ebullition are poorly understood. Bubbles in a submerged paddy soil also contain high concentrations of carbon dioxide (CO2), implying that CO2 ebullition may occur in addition to CH4 ebullition. We investigated the dynamics of CH4 and CO2 ebullition in tropical rice paddy fields using an automated closed chamber installed between rice plants. Abrupt increases in CH4 concentrations occurred by bubble ebullition. The CO2 concentration in the chamber air suddenly increased at the same time, which indicated that CO2 ebullition was also occurring. The CH4 and CO2 emissions by bubble ebullition were correlated with falling atmospheric pressure and increasing soil surface temperature. The relative contribution of CH4 and CO2 ebullitions to the daily total emissions was 95-97% and 13-35%, respectively. PMID:27347533

  3. Contribution of Ebullition to Methane and Carbon Dioxide Emission from Water between Plant Rows in a Tropical Rice Paddy Field

    PubMed Central

    Komiya, Shujiro; Noborio, Kosuke; Katano, Kentaro; Pakoktom, Tiwa; Siangliw, Meechai; Toojinda, Theerayut

    2015-01-01

    Although bubble ebullition through water in rice paddy fields dominates direct methane (CH4) emissions from paddy soil to the atmosphere in tropical regions, the temporal changes and regulating factors of this ebullition are poorly understood. Bubbles in a submerged paddy soil also contain high concentrations of carbon dioxide (CO2), implying that CO2 ebullition may occur in addition to CH4 ebullition. We investigated the dynamics of CH4 and CO2 ebullition in tropical rice paddy fields using an automated closed chamber installed between rice plants. Abrupt increases in CH4 concentrations occurred by bubble ebullition. The CO2 concentration in the chamber air suddenly increased at the same time, which indicated that CO2 ebullition was also occurring. The CH4 and CO2 emissions by bubble ebullition were correlated with falling atmospheric pressure and increasing soil surface temperature. The relative contribution of CH4 and CO2 ebullitions to the daily total emissions was 95–97% and 13–35%, respectively. PMID:27347533

  4. Portable low power cavity ring-down spectrometer for precise measurement of carbon dioxide, methane and water vapor

    NASA Astrophysics Data System (ADS)

    Fleck, Derek; Hoffnagle, John; Tan, Sze; He, Yonggang

    2016-05-01

    The necessity for monitoring of changing levels of greenhouse gases (GHGs) is clearly evident now more than ever. This has led to large deployments of analytical devices to most remote locations as well as the most densely populated regions around the world. Both large and small scale projects have forced new and old technologies to be pushed to their limits to obtain the highest performing measurements while maintaining a cost effective way to remotely monitor changes in atmospheric concentrations. In order to accomplish these strict guidelines, we present a low-power cavity ring-down spectrometer that measures Carbon Dioxide, Methane and water vapor which can achieve measurements with precisions lower than 20ppb of CO2 and 50ppt of CH4. Comparing to hundreds of watts needed in conventional CRDS design, we demonstrate that the high performance can be achieved with less than 25W. Stability of these measurements has allowed for averaging times of up to 3hr, yielding measurements of methane concentrations with precisions down to 40ppt. This is accomplished utilizing an FSR based frequency scale to determine an absolute frequency scale for these absorption features. Taking advantage of this faster, and less costly measurement technique of CRDS shows future promise with applications spanning scientific and industrial analyses, from isotopes to trace gases.

  5. Changes of carbon dioxide in surface waters during spring in the Southern Ocean

    NASA Astrophysics Data System (ADS)

    Bakker, D. C. E.; De Baar, H. J. W.; Bathmann, U. V.

    The fugacity of C0 2 (fCO 2) and the content of chlorophyll a in surface-water were determined during consecutive sections between 47° and 60°S along 6°W in austral spring, October- November 1992. In the Polar Frontal region, the fCO 2 of surface-water decreased from slightly below the atmospheric value to 50 μatm below it. This was accompanied by the development of diatom blooms. Seasonal warming of 1.2°C and air-sea exchange partly compensated the decrease of fCO 2 by biological activity. Meanders of the Polar Frontal jet and a mesoscale eddy were reflected in spatial variability of fCO 2 and chlorophyll a. Systematic observations indicated relationships between fCO 2 and chlorophyll a, albeit changing with time. The combination of biological CO 2- uptake with formation of Antarctic Intermediate Water (AAIW) makes the Polar Front a site of combined biological/physical CO 2-drawdown from the atmosphere. In the southern part of the Antarctic Circumpolar Current (sACC) and the Southern Frontal region, fCO 2 increased 7-8 μatm due to surface-water warming of 0.5°C. A sharp rise of surface water fCO 2 of 13 μatm occurred south of the southern Frontal jet. As the ice-cover disappeared, the Boundary between the ACC and the Weddell Gyre released significant amounts of CO 2. The Weddell Gyre would become a strong CO 2-source after the imminent retreat of the ice. Clearly mechanisms behind changes of fCO 2 in surface waters differ for the hydrographic regions. Interstitial brines of sea-ice had fCO 2 as low as 100 μatm and had been depleted in nutrients. The summation of significant sources and sinks in the different regions indicates an overall minor oceanic CO 2-sink of 0.3 mmol m -2 day -1 throughout the cruise, on the basis of the Wanninkhof relationship at in situ wind speed without skin effect. Uptake of C0 2 increased to 1.0 mmol m -2 day -1, when a uniform cold skin temperature difference of 0.2°C was assumed. The skin temperature difference derived from

  6. Carbon dioxide flux and net primary production of a boreal treed bog: responses to warming and water table manipulations

    NASA Astrophysics Data System (ADS)

    Munir, T. M.; Perkins, M.; Kaing, E.; Strack, M.

    2014-09-01

    Mid-latitude treed bogs are significant carbon (C) stocks and are highly sensitive to global climate change. In a dry continental treed bog, we compared three sites; control, recent (1-3 years; experimental) and older drained (10-13 years; drained) with water levels at 38, 74 and 120 cm below the surface, respectively. At each site we measured carbon dioxide (CO2) fluxes and tree root respiration (Rr) (across hummock-hollow microtopography of the forest floor) and net primary production (NPP) of trees during the growing seasons (May to October) of 2011-2013. The carbon (C) balance was calculated by adding net CO2 exchange of the forest floor (NEff-Rr) to the NPP of the trees. From cooler and wetter 2011 to driest and warmest 2013, The control site was a~C sink of 92, 70 and 76 g m-2, experimental site was a C source of 14, 57 and 135 g m-2, and drained site was a progressively smaller source of 26, 23 and 13 g m-2, respectively. Although all microforms at the experimental site had large net CO2 emissions, the longer-term drainage and deeper water level at the drained site resulted in the replacement of mosses with vascular plants (shrubs) at the hummocks and lichens at the hollows leading to the highest CO2 uptake at drained hummocks and significant losses at hollows. The tree NPP was highest at the drained site. We also quantified the impact of climatic warming at all water table treatments by equipping additional plots with open-top chambers (OTCs) that caused a passive warming on average of ∼1 °C and differential air warming of ∼6 °C (at mid-day full sun) across the study years. Warming significantly enhanced the shrub growth and CO2 sink function of the drained hummocks (exceeding the cumulative respiration losses at hollows induced by the lowered water level × warming). There was an interaction of water level with warming across hummocks that resulted in largest net CO2 uptake at warmed drained hummocks. Thus in 2013, the warming treatment enhanced

  7. Engineering Interfacial Silicon Dioxide for Improved Metal-Insulator-Semiconductor Silicon Photoanode Water Splitting Performance.

    PubMed

    Satterthwaite, Peter F; Scheuermann, Andrew G; Hurley, Paul K; Chidsey, Christopher E D; McIntyre, Paul C

    2016-05-25

    Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits hole conduction from the photoabsorbing substrate to the surface oxygen evolution catalyst. Herein, we report a significant reduction of bilayer resistance, achieved by forming stable, ultrathin (<1.3 nm) SiO2 layers, allowing fabrication of water splitting photoanodes with hole conductances near the maximum achievable with the given catalyst and Si substrate. Three methods for controlling the SiO2 interlayer thickness on the Si(100) surface for ALD-TiO2 protected anodes were employed: (1) TiO2 deposition directly on an HF-etched Si(100) surface, (2) TiO2 deposition after SiO2 atomic layer deposition on an HF-etched Si(100) surface, and (3) oxygen scavenging, post-TiO2 deposition to decompose the SiO2 layer using a Ti overlayer. Each of these methods provides a progressively superior means of reliably thinning the interfacial SiO2 layer, enabling the fabrication of efficient and stable water oxidation silicon anodes. PMID:27096845

  8. Momentum, water vapor, and carbon dioxide exchange at a centrally located prairie site during FIFE

    NASA Technical Reports Server (NTRS)

    Verma, Shashi B.; Kim, Joon; Clement, Robert J.

    1992-01-01

    Eddy correlation measurements were taken of momentum, water vapor, sensible heat, and CO2 at a centrally located plateau site in the FIFE study area from May to October 1987. Approximately 82 percent of the vegetation at the site was composed of several C4 grass species, with the remainder being C3 grasses, forbs, wedges, and woody plants. Precipitation was about normal during the study period, except for a three week dry period in late July to early August that caused moisture stress conditions.

  9. Energy and economic analysis of the carbon dioxide capture installation with the use of monoethanolamine and ammonia

    NASA Astrophysics Data System (ADS)

    Bochon, Krzysztof; Chmielniak, Tadeusz

    2015-03-01

    In the study an accurate energy and economic analysis of the carbon capture installation was carried out. Chemical absorption with the use of monoethanolamine (MEA) and ammonia was adopted as the technology of carbon dioxide (CO2) capture from flue gases. The energy analysis was performed using a commercial software package to analyze the chemical processes. In the case of MEA, the demand for regeneration heat was about 3.5 MJ/kg of CO2, whereas for ammonia it totalled 2 MJ/kg CO2. The economic analysis was based on the net present value (NPV) method. The limit price for CO2 emissions allowances at which the investment project becomes profitable (NPV = 0) was more than 160 PLN/Mg for MEA and less than 150 PLN/Mg for ammonia. A sensitivity analysis was also carried out to determine the limit price of CO2 emissions allowances depending on electricity generation costs at different values of investment expenditures.

  10. Hydrothermal synthesis of nanocubes of sillenite type compounds for photovoltaic applications and solar energy conversion of carbon dioxide to fuels

    DOEpatents

    Subramanian, Vaidyanathan; Murugesan, Sankaran

    2014-04-29

    The present invention relates to formation of nanocubes of sillenite type compounds, such as bismuth titanate, i.e., Bi.sub.12TiO.sub.20, nanocubes, via a hydrothermal synthesis process, with the resulting compound(s) having multifunctional properties such as being useful in solar energy conversion, environmental remediation, and/or energy storage, for example. In one embodiment, a hydrothermal method is disclosed that transforms nanoparticles of TiO.sub.2 to bismuth titanate, i.e., Bi.sub.12TiO.sub.20, nanocubes, optionally loaded with palladium nanoparticles. The method includes reacting titanium dioxide nanotubes with a bismuth salt in an acidic bath at a temperature sufficient and for a time sufficient to form bismuth titanate crystals, which are subsequently annealed to form bismuth titanate nanocubes. After annealing, the bismuth titanate nanocubes may be optionally loaded with nano-sized metal particles, e.g., nanosized palladium particles.

  11. Biodiesel production by two-stage transesterification with ethanol by washing with neutral water and water saturated with carbon dioxide.

    PubMed

    Mendow, G; Veizaga, N S; Sánchez, B S; Querini, C A

    2012-08-01

    Industrial production of ethyl esters is impeded by difficulties in purifying the product due to high amounts of soap formed during transesterification. A simple biodiesel wash process was developed that allows successful purification of samples containing high amounts of soap. The key step was a first washing with neutral water, which removed the soaps without increasing the acidity or affecting the process yield. Afterward, the biodiesel was washed with water saturated with CO(2), a mild acid that neutralized the remaining soaps and extracted impurities. The acidity, free-glycerine, methanol and soaps concentrations were reduced to very low levels with high efficiency, and using non-corrosive acids. Independently of the initial acidity, it was possible to obtain biodiesel within EN14214 specifications. The process included the recovery of soaps by hydrolysis and esterification, making it possible to obtain the theoretical maximum amount of biodiesel. PMID:22721682

  12. Formation of iodinated organic compounds by oxidation of iodide-containing waters with manganese dioxide.

    PubMed

    Gallard, Hervé; Allard, Sébastien; Nicolau, Rudy; von Gunten, Urs; Croué, Jean Philippe

    2009-09-15

    This study shows that iodinated organic compounds can be produced when iodide-containing waters are in contact with manganese oxide birnessite (delta-MnO2) in the pH range of 5-7. In the absence of natural organic matter (NOM), iodide is oxidized to iodate that is also adsorbed onto delta-MnO2. In the presence of iodide and NOM, adsordable organic iodine compounds (AOI) are formed at pH < 7 because of the oxidation of iodide to iodine by delta-MnO2 and the reactions of iodine with NOM. In addition, iodoacetic acid and iodoform have been identified as specific iodinated byproducts. Formation of iodoform is not observed for high NOM/delta-MnO2 ratios due to inhibition of the catalytic effect of delta-MnO2 by NOM poisoning. Experiments with model compounds such as resorcinol and 3,5-heptanedione confirmed that the delta-MnO2/l(-) system is very effective for the formation of iodinated organic compounds. These results suggest that birnessite acts as a catalyst through the oxidation of iodide to iodine and the polarization of the iodine molecule, which then reacts with NOM moieties. Furthermore, our results indicate that during water treatment in the presence of manganese oxide, iodinated organic compounds may be formed, which may lead to taste and odor or toxicological problems. PMID:19806734

  13. Radium removal from water by manganese dioxide adsorption and diatomaceous-earth filtration. Final report

    SciTech Connect

    Patel, R.; Clifford, D.

    1991-11-01

    The study reveals that radium adsorption onto precipitated MnO2 followed by diatomaceous earth (DE) filtration is a very effective treatment process for radium-contaminated water. Radium removals in the range of 80% to 97% were observed for performed MnO2 feed concentrations of 0.63 and 1.26 mg/L as Mn in groundwaters with hardness in the range of 100 to 245 mg/L as CaCO3. Radium removal increased slightly with increasing pH whereas it decreased slightly with increasing hardness and iron (II) concentrations. Pilot studies were performed in Lemont, IL using DE filtration on a groundwater containing 12 pCi/L226Ra and 6 pCi/L228. Radium removals for both the pilot plants ranged from 90% to 97% at a MnO2 feed concentration of 1.26 mg/L as Mn, a total hardness of 245 mg/L as CaCO3, and a pH of 6.5. The costs of water treatment by MnO2 adsorption and DE filtration were estimated at $0.71 per 1000 gal for 280,000 gpd plants and $0.47 for 1 Mgd plants.

  14. Eddy covariance measurements of carbon dioxide, latent and sensible energy fluxes above a meadow on a mountain slope

    PubMed Central

    Hammerle, Albin; Haslwanter, Alois; Schmitt, Michael; Bahn, Michael; Tappeiner, Ulrike; Cernusca, Alexander; Wohlfahrt, Georg

    2014-01-01

    Carbon dioxide, latent and sensible energy fluxes were measured by means of the eddy covariance method above a mountain meadow situated on a steep slope in the Stubai Valley/Austria, based on the hypothesis that, due to the low canopy height, measurements can be made in the shallow equilibrium layer where the wind field exhibits characteristics akin to level terrain. In order to test the validity of this hypothesis and to identify effects of complex terrain in the turbulence measurements, data were subjected to a rigorous testing procedure using a series of quality control measures established for surface layer flows. The resulting high-quality data set comprised 36 % of the original observations, the substantial reduction being mainly due to a change in surface roughness and associated fetch limitations in the wind sector dominating during nighttime and transition periods. The validity of the high-quality data set was further assessed by two independent tests: i) a comparison with the net ecosystem carbon dioxide exchange measured by means of ecosystem chambers and ii) the ability of the eddy covariance measurements to close the energy balance. The net ecosystem CO2 exchange measured by the eddy covariance method agreed reasonably with ecosystem chamber measurements. The assessment of the energy balance closure showed that there was no significant difference in the correspondence between the meadow on the slope and another one situated on flat ground at the bottom of the Stubai Valley, available energy being underestimated by 28 and 29 %, respectively. We thus conclude that, appropriate quality control provided, the eddy covariance measurements made above a mountain meadow on a steep slope are of similar quality as compared to flat terrain. PMID:24465032

  15. Compositional Mapping of Surfaces in the Saturn System with Cassini VIMS: the Role of Water, Cyanide Compounds and Carbon Dioxide

    NASA Astrophysics Data System (ADS)

    Clark, R. N.; Brown, R.; Baines, K.; Bellucci, G.; Bibring, J.; Buratti, B.; Capaccioni, F.; Cerroni, P.; Combes, M.; Coradini, A.; Cruikshank, D.; Drossart, P.; Filacchione, G.; Formisano, V.; Jaumann, R.; Langevin, Y.; Matson, D.; McCord, T.; Mennella, V.; Nelson, R.; Nicholson, P.; Sicardy, B.; Sotin, C.; Curchin, J.; Hoefen, T.

    2005-12-01

    The Cassini Visual and Infrared Mapping Spectrometer (VIMS) has completed one year of mapping in Saturn orbit and has provided a wealth of compositional information on the satellite surfaces and rings. While water ice is abundant in the Saturn system, carbon dioxide, cyanide compounds, and organic materials are also detected. The 2.42-micron absorption first observed on Phoebe (Clark et al., Nature, v435, 66-69, 2005), is reported here for the first time on Iapetus, Dione, and the F-ring. Trapped CO2 has also been discovered in the darker regions on Dione and Hyperion. Possible trace amounts of CO2 are seen on Mimas, Tethys, Rhea, and Enceladus. No CO2 has been detected in the F-ring. No 2.42-micron feature has yet been detected in spectra of Hyperion, but VIMS has yet to adequately spatially resolve the darker regions. Following Clark et al., 2005, the 2.42-micron band is due to cyanide compounds, and while the exact cyanide composition is still under study, complex CN molecules are ruled out by observed spectral structure favoring simple molecules such as KCN or HCN. Ultraviolet photolysis experiments conducted on cyanide compounds, nitriles, and organic compounds show that the origin of the trapped CO2 on the satellites of both Jupiter and Saturn can be explained by photolysis of cyanide compounds. The UV photolysis of laboratory samples shows the growth of CO2 with a corresponding decrease in CN, and the production of a brown color, commonly observed in the creation of tholins. The oxygen most likely comes from water in the systems. The cyanide photolysis appears to occur in the Saturn and Jupiter systems and probably in comets explaining a common link in chemistry, photochemical processing, and the commonly observed spectral properties.

  16. Retention of titanium dioxide nanoparticles in biological activated carbon filters for drinking water and the impact on ammonia reduction.

    PubMed

    Liu, Zhiyuan; Yu, Shuili; Park, Heedeung; Liu, Guicai; Yuan, Qingbin

    2016-06-01

    Given the increasing discoveries related to the eco-toxicity of titanium dioxide (TiO2) nanoparticles (NPs) in different ecosystems and with respect to public health, it is important to understand their potential effects in drinking water treatment (DWT). The effects of TiO2 NPs on ammonia reduction, ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in biological activated carbon (BAC) filters for drinking water were investigated in static and dynamic states. In the static state, both the nitrification potential and AOB were significantly inhibited by 100 μg L(-1) TiO2 NPs after 12 h (p < 0.05), and the threshold decreased to 10 μg L(-1) with prolonged exposure (36 h, p < 0.05). However, AOA were not considerably affected in any of the tested conditions (p > 0.05). In the dynamic state, different amounts of TiO2 NP pulses were injected into three pilot-scale BAC filters. The decay of TiO2 NPs in the BAC filters was very slow. Both titanium quantification and scanning electron microscope analysis confirmed the retention of TiO2 NPs in the BAC filters after 134 days of operation. Furthermore, the TiO2 NP pulses considerably reduced the performance of ammonia reduction. This study identified the retention of TiO2 NPs in BAC filters and the negative effect on the ammonia reduction, suggesting a potential threat to DWT by TiO2 NPs. PMID:26931341

  17. Energy trends and the water-energy binomium for Brazil.

    PubMed

    Da Rocha, Gisele O; Dos Anjos, Jeancarlo P; De Andrade, Jailson B

    2015-01-01

    According to the demands of energy saving and carbon emission reduction, the water vs. energy nexus has become a major concern worldwide. Brazil occupies a singular position in the global energy system. A major portion of the Brazilian occupancies has electricity and the energy system expansion that, at first, possesses adequate means for supporting the economic growing may experience some turnovers. The Brazil determination through alternative fuels was a natural choice, given its large hydropower potential and land agricultural base. In the transportation sector Brazil has developed its energy matrix towards an important rate of ethanol and biodiesel. Although those fuels are low carbon emitter, they may probably not be an affordable alternative regarding land use, food security and water footprint. In this way, considering the recent advances in the exploration of oil from Pre-salt (9-15 million barrels) and the discovery of shale gas wells up to 245 tcf, together to unfavorable social and environmental issues associated to biofuels, the Brazilian energy matrix might turn back to the fossil fuels again. These represent challenges to the Brazilian policymakers and how they will be solved will reflect not only in Brazil but also to the world at large. PMID:26131629

  18. Global Energy and Water Budgets in MERRA

    NASA Technical Reports Server (NTRS)

    Bosilovich, Michael G.; Robertson, Franklin R.; Chen, Junye

    2010-01-01

    Reanalyses, retrospectively analyzing observations over climatological time scales, represent a merger between satellite observations and models to provide globally continuous data and have improved over several generations. Balancing the Earth s global water and energy budgets has been a focus of research for more than two decades. Models tend to their own climate while remotely sensed observations have had varying degrees of uncertainty. This study evaluates the latest NASA reanalysis, called the Modern Era Retrospective-analysis for Research and Applications (MERRA), from a global water and energy cycles perspective. MERRA was configured to provide complete budgets in its output diagnostics, including the Incremental Analysis Update (IAU), the term that represents the observations influence on the analyzed states, alongside the physical flux terms. Precipitation in reanalyses is typically sensitive to the observational analysis. For MERRA, the global mean precipitation bias and spatial variability are more comparable to merged satellite observations (GPCP and CMAP) than previous generations of reanalyses. Ocean evaporation also has a much lower value which is comparable to observed data sets. The global energy budget shows that MERRA cloud effects may be generally weak, leading to excess shortwave radiation reaching the ocean surface. Evaluating the MERRA time series of budget terms, a significant change occurs, which does not appear to be represented in observations. In 1999, the global analysis increments of water vapor changes sign from negative to positive, and primarily lead to more oceanic precipitation. This change is coincident with the beginning of AMSU radiance assimilation. Previous and current reanalyses all exhibit some sensitivity to perturbations in the observation record, and this remains a significant research topic for reanalysis development. The effect of the changing observing system is evaluated for MERRA water and energy budget terms.

  19. SYNTHESIS OF SULFUR-BASED WATER TREATMENT AGENT FROM SULFUR DIOXIDE WAST STREAMS

    SciTech Connect

    Robert C. Brown

    2003-10-01

    The corrosion behavior of two coagulants used in water treatment, ferric chloride (FC) and polymeric ferric sulfate (PFS) prepared from SO{sub 2} was investigated. Corrosion tests were performed to compare the corrosivity of these two coagulants on aluminum 6061 and steel 4140 specimens. Results showed that both temperature and concentration of the coagulants substantially impact corrosion rates. The corrosion rates increased with the increase of temperature and concentration. The results from a scanning electron microscope (SEM) showed that chloride caused more serious pitting than sulfate anion on both aluminum and steel specimens. Although SEM confirmed the existence of pitting corrosion, the results of weight loss indicated that the uniform corrosion predominate the corrosion mechanism, and pitting corrosion played a less important role. The test proved that PFS was less corrosive than FC, which may lead to the large-scale application of PFS in waste treatment in the near future.

  20. Ultradry Carbon Dioxide-in-Water Foams with Viscoelastic Aqueous Phases.

    PubMed

    Xue, Zheng; Worthen, Andrew J; Da, Chang; Qajar, Ali; Ketchum, Isaiah Robert; Alzobaidi, Shehab; Huh, Chun; Prodanović, Maša; Johnston, Keith P

    2016-01-12

    For foams with ultra low water contents, the capillary pressure is very large and induces rapid drainage that destabilizes the aqueous lamellae between the gas bubbles. However, we show that high-pressure CO2-in-water foams can be stabilized with a viscoelastic aqueous phase composed of entangled wormlike micelles, even for extremely high CO2 volume fractions ϕ of 0.95 to 0.98; the viscosity of these ultradry foams increased by up to 3-4-fold, reaching more than 100 cP relative to foams formed with conventional low viscosity aqueous phases. The foam morphology consisted of fine ∼20 μm polyhedral-shaped CO2 bubbles that were stable for hours. The wormlike micelles were formed by mixing anionic sodium lauryl ether sulfate (SLES) with salt and a protonated cationic surfactant, as shown by cryogenic transmission electron microscopy (cryo-TEM) and large values of the zero-shear viscosity and the dynamic storage and loss moduli. With the highly viscous continuous aqueous phases, the foam lamella drainage rates were low, as corroborated by confocal microscopy. The preservation of viscous thick lamellae resulted in lower rates of Ostwald ripening relative to conventional foams as shown by high-pressure optical microscopy. The ability to stabilize viscous ultra high internal phase foams is expected to find utility in various practical applications, including nearly "waterless" fracturing fluids for recovery of oil and gas in shale, offering the possibility of a massive reduction in the amount of wastewater. PMID:26666311

  1. Elevated water temperature and carbon dioxide concentration increase the growth of a keystone echinoderm

    PubMed Central

    Gooding, Rebecca A.; Harley, Christopher D. G.; Tang, Emily

    2009-01-01

    Anthropogenic climate change poses a serious threat to biodiversity. In marine environments, multiple climate variables, including temperature and CO2 concentration ([CO2]), are changing simultaneously. Although temperature has well-documented ecological effects, and many heavily calcified marine organisms experience reduced growth with increased [CO2], little is known about the combined effects of temperature and [CO2], particularly on species that are less dependent on calcified shells or skeletons. We manipulated water temperature and [CO2] to determine the effects on the sea star Pisaster ochraceus, a keystone predator. We found that sea star growth and feeding rates increased with water temperature from 5 °C to 21 °C. A doubling of current [CO2] also increased growth rates both with and without a concurrent temperature increase from 12 °C to 15 °C. Increased [CO2] also had a positive but nonsignificant effect on sea star feeding rates, suggesting [CO2] may be acting directly at the physiological level to increase growth rates. As in past studies of other marine invertebrates, increased [CO2] reduced the relative calcified mass in sea stars, although this effect was observed only at the lower experimental temperature. The positive relationship between growth and [CO2] found here contrasts with previous studies, most of which have shown negative effects of [CO2] on marine species, particularly those that are more heavily calcified than P. ochraceus. Our findings demonstrate that increased [CO2] will not have direct negative effects on all marine invertebrates, suggesting that predictions of biotic responses to climate change should consider how different types of organisms will respond to changing climatic variables. PMID:19470464

  2. Binary adsorption equilibrium of carbon dioxide and water vapor on activated alumina.

    PubMed

    Li, Gang; Xiao, Penny; Webley, Paul

    2009-09-15

    Adsorption equilibria of a CO2/H2O binary mixture on activated alumina F-200 were measured at several temperatures and over a wide range of concentrations from 4% to around 90% of the saturated water vapor pressure. In comparison with the single-component data, the loading of CO2 was not reduced in the presence of H2O, whereas at low relative humidity the adsorption of H2O was depressed. The binary system was described by a competitive/cooperative adsorption model where the readily adsorbed water layers acted as secondary sites for further CO2 adsorption via hydrogen bonding or hydration reaction. The combination of kinetic models, namely, a Langmuir isotherm for characterizing pure CO2 adsorption and a BET isotherm for H2O, was extended to derive a binary adsorption equilibrium model for the CO2/H2O mixture. Models based on the ideal adsorbed solution theory of Myers and Prausnitz failed to characterize the data over the whole composition range, and a large deviation of binary CO2/H2O equilibrium from ideal solution behavior was observed. The extended Langmuir-BET (LBET) isotherm, analogous to the extended Langmuir equation, drastically underestimated the CO2 loading. By incorporating the interactions between CO2 and H2O molecules on the adsorbent surface and taking into account the effect of nonideality, the realistic interactive LBET (R-LBET) model was found to be in very good agreement with the experimental data. The derived binary isosteric heat of adsorption showed that the heat was reduced by competitive adsorption but promoted by cooperative adsorption. PMID:19678623

  3. Condensation of water vapor and carbon dioxide in the jet exhausts of rocket engines: 1. Model calculation of the physical conditions in a jet exhaust

    NASA Astrophysics Data System (ADS)

    Platov, Yu. V.; Alpatov, V. V.; Klyushnikov, V. Yu.

    2014-01-01

    Model calculations have been performed for the temperature and pressure of combustion products in the jet exhaust of rocket engines of last stages of Proton, Molniya, and Start launchers operating in the upper atmosphere at altitudes above 120 km. It has been shown that the condensation of water vapor and carbon dioxide can begin at distances of 100-150 and 450-650 m away from the engine nozzle, respectively.

  4. A study of alternative methods for reclaiming oxygen from carbon dioxide and water by a solid-electrolyte process for spacecraft applications

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Two alternative technical approaches were studied for application of an electrochemical process using a solid oxide electrolyte (zirconia stabilized by yttria or scandia) to oxygen reclamation from carbon dioxide and water, for spacecraft life support systems. Among the topics considered are the advisability of proceeding to engineering prototype development and fabrication of a full scale model for the system concept, the optimum choice of method or approach to be carried into prototype development, and the technical problem areas which exist.

  5. Carbon dioxide and the stomatal control of water balance and photosynthesis in higher plants. Progress report, July 1, 1990--June 30, 1992

    SciTech Connect

    Not Available

    1992-07-01

    Research continued into the investigation of the effects of carbon dioxide on stomatal control of water balance and photosynthesis in higher plants. Topics discussed this period include a method of isolating a sufficient number of guard cell chloroplasts for biochemical studies by mechanical isolation of epidermal peels; the measurement of stomatal apertures with a digital image analysis system; development of a high performance liquid chromatography method for quantification of metabolites in guard cells; and genetic control of stomatal movements in Pima cotton. (CBS)

  6. Advanced Proliferation Resistant, Lower Cost, Uranium-Thorium Dioxide Fuels for Light Water Reactors (Progress report for work through June 2002, 12th quarterly report)

    SciTech Connect

    Mac Donald, Philip Elsworth

    2002-09-01

    The overall objective of this NERI project is to evaluate the potential advantages and disadvantages of an optimized thorium-uranium dioxide (ThO2/UO2) fuel design for light water reactors (LWRs). The project is led by the Idaho National Engineering and Environmental Laboratory (INEEL), with the collaboration of three universities, the University of Florida, Massachusetts Institute of Technology (MIT), and Purdue University; Argonne National Laboratory; and all of the Pressurized Water Reactor (PWR) fuel vendors in the United States (Framatome, Siemens, and Westinghouse). In addition, a number of researchers at the Korean Atomic Energy Research Institute and Professor Kwangheon Park at Kyunghee University are active collaborators with Korean Ministry of Science and Technology funding. The project has been organized into five tasks: · Task 1 consists of fuel cycle neutronics and economics analysis to determine the economic viability of various ThO2/UO2 fuel designs in PWRs, · Task 2 will determine whether or not ThO2/UO2 fuel can be manufactured economically, · Task 3 will evaluate the behavior of ThO2/UO2 fuel during normal, off-normal, and accident conditions and compare the results with the results of previous UO2 fuel evaluations and U.S. Nuclear Regulatory Commission (NRC) licensing standards, · Task 4 will determine the long-term stability of ThO2/UO2 high-level waste, and · Task 5 consists of the Korean work on core design, fuel performance analysis, and xenon diffusivity measurements.

  7. Open- vs. closed-path eddy covariance measurements of the net ecosystem carbon dioxide and water vapour exchange: a long-term perspective.

    PubMed

    Haslwanter, Alois; Hammerle, Albin; Wohlfahrt, Georg

    2009-02-01

    The differential design, deployment and data post-processing of open- (OP) and closed-path (CP) eddy covariance systems is a potential source of bias for ongoing global flux synthesis activities. Here we use a unique six year data set of concurrent CP and OP carbon dioxide (CO2) and water vapour (H2O) eddy covariance flux measurements above a temperate mountain grassland in Austria to explore the consequences of these differences on a long-term basis. The theoretically based transfer function approach was able to account and correct for the differences in low-pass filtering between the two systems. Corrected CO2 and H2O fluxes exhibited excellent 1:1 correspondence, but the CP system tended to underestimate OP H2O fluxes during conditions of high air temperature, wind speed and global radiation, large sun angles and low relative humidity. Corrections for self-heating of the OP infra-red gas analyser had a very small effect on these relationships. Energy balance closure was slightly more favourable for the OP system. No significant differences were found for the random flux uncertainty of both systems. A larger fraction of OP data had to be excluded because of obstructions of the infra-red path by water and snow. This, however, did not translate into a correspondingly larger fraction of accepted CP flux values, because of a larger percentage of CP flux data failing on the stationarity test. Integrated over the annual cycle, the CP system yielded on average a more positive net ecosystem CO2 exchange (25 vs. 0 gC m(-2) y(-1)) and a lower evapotranspiration (465 vs. 549 mm y(-1)) as compared to the OP system. PMID:24465069

  8. Open- vs. closed-path eddy covariance measurements of the net ecosystem carbon dioxide and water vapour exchange: a long-term perspective

    PubMed Central

    Haslwanter, Alois; Hammerle, Albin; Wohlfahrt, Georg

    2014-01-01

    The differential design, deployment and data post-processing of open- (OP) and closed-path (CP) eddy covariance systems is a potential source of bias for ongoing global flux synthesis activities. Here we use a unique six year data set of concurrent CP and OP carbon dioxide (CO2) and water vapour (H2O) eddy covariance flux measurements above a temperate mountain grassland in Austria to explore the consequences of these differences on a long-term basis. The theoretically based transfer function approach was able to account and correct for the differences in low-pass filtering between the two systems. Corrected CO2 and H2O fluxes exhibited excellent 1:1 correspondence, but the CP system tended to underestimate OP H2O fluxes during conditions of high air temperature, wind speed and global radiation, large sun angles and low relative humidity. Corrections for self-heating of the OP infra-red gas analyser had a very small effect on these relationships. Energy balance closure was slightly more favourable for the OP system. No significant differences were found for the random flux uncertainty of both systems. A larger fraction of OP data had to be excluded because of obstructions of the infra-red path by water and snow. This, however, did not translate into a correspondingly larger fraction of accepted CP flux values, because of a larger percentage of CP flux data failing on the stationarity test. Integrated over the annual cycle, the CP system yielded on average a more positive net ecosystem CO2 exchange (25 vs. 0 gC m−2 y−1) and a lower evapotranspiration (465 vs. 549 mm y−1) as compared to the OP system. PMID:24465069

  9. Expanding the potential for saline formations : modeling carbon dioxide storage, water extraction and treatment for power plant cooling.

    SciTech Connect

    Not Available

    2011-04-01

    The National Water, Energy and Carbon Sequestration simulation model (WECSsim) is being developed to address the question, 'Where in the current and future U.S. fossil fuel based electricity generation fleet are there opportunities to couple CO{sub 2} storage and extracted water use, and what are the economic and water demand-related impacts of these systems compared to traditional power systems?' The WECSsim collaborative team initially applied this framework to a test case region in the San Juan Basin, New Mexico. Recently, the model has been expanded to incorporate the lower 48 states of the U.S. Significant effort has been spent characterizing locations throughout the U.S. where CO{sub 2} might be stored in saline formations including substantial data collection and analysis efforts to supplement the incomplete brine data offered in the NatCarb database. WECSsim calculates costs associated with CO{sub 2} capture and storage (CCS) for the power plant to saline formation combinations including parasitic energy costs of CO{sub 2} capture, CO{sub 2} pipelines, water treatment options, and the net benefit of water treatment for power plant cooling. Currently, the model can identify the least-cost deep saline formation CO{sub 2} storage option for any current or proposed coal or natural gas-fired power plant in the lower 48 states. Initial results suggest that additional, cumulative water withdrawals resulting from national scale CCS may range from 676 million gallons per day (MGD) to 30,155 MGD depending on the makeup power and cooling technologies being utilized. These demands represent 0.20% to 8.7% of the U.S. total fresh water withdrawals in the year 2000, respectively. These regional and ultimately nation-wide, bottom-up scenarios coupling power plants and saline formations throughout the U.S. can be used to support state or national energy development plans and strategies.

  10. Progress on High-Energy 2-micron Solid State Laser for NASA Space-Based Wind and Carbon Dioxide Measurements

    NASA Technical Reports Server (NTRS)

    Singh, Upendra N.

    2011-01-01

    Sustained research efforts at NASA Langley Research Center during last fifteen years have resulted in significant advancement of a 2-micron diode-pumped, solid-state laser transmitter for wind and carbon dioxide measurements from ground, air and space-borne platforms. Solid-state 2-micron laser is a key subsystem for a coherent Doppler lidar that measures the horizontal and vertical wind velocities with high precision and resolution. The same laser, after a few modifications, can also be used in a Differential Absorption Lidar system for measuring atmospheric CO2 concentration profiles. Researchers at NASA Langley Research Center have developed a compact, flight capable, high energy, injection seeded, 2-micron laser transmitter for ground and airborne wind and carbon dioxide measurements. It is capable of producing 250 mJ at 10 Hz by an oscillator and one amplifier. This compact laser transmitter was integrated into a mobile trailer based coherent Doppler wind and CO2 DIAL system and was deployed during field measurement campaigns. This paper will give an overview of 2-micron solid-state laser technology development and discuss results from recent ground-based field measurements.

  11. Evaluation of an airborne triple-pulsed 2 μm IPDA lidar for simultaneous and independent atmospheric water vapor and carbon dioxide measurements.

    PubMed

    Refaat, Tamer F; Singh, Upendra N; Yu, Jirong; Petros, Mulugeta; Ismail, Syed; Kavaya, Michael J; Davis, Kenneth J

    2015-02-20

    Water vapor and carbon dioxide are the most dominant greenhouse gases directly contributing to the Earth's radiation budget and global warming. A performance evaluation of an airborne triple-pulsed integrated path differential absorption (IPDA) lidar system for simultaneous and independent monitoring of atmospheric water vapor and carbon dioxide column amounts is presented. This system leverages a state-of-the-art Ho:Tm:YLF triple-pulse laser transmitter operating at 2.05 μm wavelength. The transmitter provides wavelength tuning and locking capabilities for each pulse. The IPDA lidar system leverages a low risk and technologically mature receiver system based on InGaAs pin detectors. Measurement methodology and wavelength setting are discussed. The IPDA lidar return signals and error budget are analyzed for airborne operation on-board the NASA B-200. Results indicate that the IPDA lidar system is capable of measuring water vapor and carbon dioxide differential optical depth with 0.5% and 0.2% accuracy, respectively, from an altitude of 8 km to the surface and with 10 s averaging. Provided availability of meteorological data, in terms of temperature, pressure, and relative humidity vertical profiles, the differential optical depth conversion into weighted-average column dry-air volume-mixing ratio is also presented. PMID:25968204

  12. Molecular dynamics modeling of carbon dioxide, water and natural organic matter in Na-hectorite.

    PubMed

    Yazaydin, A Ozgur; Bowers, Geoffrey M; Kirkpatrick, R James

    2015-09-28

    Molecular dynamics (MD) modeling of systems containing a Na-exchanged smectite clay (hectorite) and model natural organic matter (NOM) molecules along with pure H2O, pure CO2, or a mixture of H2O and CO2 provides significant new insight into the molecular scale interactions among silicate surfaces, dissolved cations and organic molecules, H2O and CO2 relevant to geological C-sequestration strategies. The simulations for systems containing H2O show the following results; (1) Na(+) does not bridge between NOM molecules and the clay surface at protonation states comparable to near neutral pH conditions. (2) In systems without CO2 the NOM molecules retain charge balancing cations and drift away from the silicate surface. (3) In systems containing both H2O and CO2, the NOM molecules adopt equilibrium positions at the H2O-CO2 interface with the more hydrophilic structural elements facing the H2O and the more hydrophobic ones facing the CO2. In systems with only CO2, NOM and Na(+) ions are pinned to the clay surface with the hydrophilic structural elements of the NOM pointed toward the clay surface. Dynamically, in systems with only CO2, Na(+) diffusion is nearly eliminated, and in systems with a thin water film on the clay surface diffusion perpendicular the surface is greatly reduced relative to the system with bulk water. Energetically, the results for the systems with only H2O show that hydration of the net charge neutral Na-NOM molecule outweighs the sum of its Coulombic and dispersive interactions with the net charge-neutral Na-clay particle and the interactions of the water molecules with the hydrophobic structural elements of the NOM. The aggregation of NOM molecules in solution appears to be driven not by Na(+) bridging between the molecules but by hydrophobic interactions between them. In contrast, for the systems with only CO2 the interaction between the Na-NOM molecules and the CO2 is outweighed by the interaction of NOM with the clay particle. With both H2O

  13. Modeling the Behavior of Formate, Acetate, and Carbon Dioxide in Water/Steam Cycles

    SciTech Connect

    Gruszkiewicz, Miroslaw {Mirek} S; Palmer, Donald

    2004-01-01

    Organic substances persist in high-temperature aqueous environments for varying periods of tiem depending on temperature, pH, contact with solid surfaces, and other factors. Since carboxylic acids and CO{sub 2} affect the pH and can potentially play specific roles in the promotion of inhibition of turbine corrosion, it is important to be able to predict the amounts of these substances that are transferred to steam and the composition of the early condensate as a function of condesnation ratio for various boiler chemistries. Such predictions can only be made using a speciated model including all the solutes. Example calculations for AVT and OT chemistry show complex relationships between early condensate enrichment ratios and boiler pressure, boiler water composition, and condensation ratio. Even small amounts of sodium and chloride below 0.1 {mu}g {center_dot} kg{sup -1} in the steam are relevant to early condensate pH and carboxylic acid concentration. The calculations show that the enrichment of the early condensate relative to steam is typically 10 times greater for formate than for acetate.

  14. Photoassisted Electrolysis of Water by Irradiation of a Titanium Dioxide Electrode

    PubMed Central

    Wrighton, Mark S.; Ginley, David S.; Wolczanski, Peter T.; Ellis, Arthur B.; Morse, David L.; Linz, Arthur

    1975-01-01

    Ultraviolet irradiation (351, 364 nm) of the n-type semiconductor TiO2 as the single crystal electrode of an aqueous electrochemical cell evolves O2 at the TiO2 electrode and H2 at the Pt electrode. The gases are typically evolved in a two: one (H2:O2) volume ratio. The photoassisted reaction seems to require applied voltages, but values as low as 0.25 V do allow the photoassisted electrolysis to proceed. Prolonged irradiation in either acid or base evolves the gaseous products in amounts which clearly demonstrate that the reaction is catalytic with respect to the TiO2. The wavelength response of the TiO2 and the correlation of product yield and current are reported. The results support the claim that TiO2 is a true photoassistance agent for the electrolysis of water. Minimum optical storage efficiencies of the order of 1% can be achieved by the production of H2. PMID:16592241

  15. Titanium Dioxide Nanorods with Hydrogenated Oxygen Vacancies for Enhanced Solar Water Splitting.

    PubMed

    Sun, Bo; Shi, Tielin; Tan, Xianhua; Liu, Zhiyong; Wu, Youni; Liao, Guanglan

    2016-06-01

    We demonstrate that moderate hydrogen annealing is a simple and effective approach to substantially improve the photocatalytic activity of TiO2 nanorods via increasing oxygen vacancies in outer layer. Hydrogenated TiO2 nanorods are obtained by annealing in hydrogen atmosphere at various temperatures ranging from 200 degrees C to 350 degrees C. TEM images directly illustrate the disordered layer on the surface of nanorods induced by hydrogen annealing. The photoelectrochemical measurements reveal that the photocurrent is improved first as the temperature increases and reaches to the maximum value at an appropriate temperature (250 degrees C), corresponding to about 50% enhancement compared to the pristine TiO2. Incident photon-to-electron conversion efficiency spectra reveal that the photocurrent improvement is mainly attributed to the enhanced photocatalytic activity of TiO2 in ultraviolet region. Mott-Schottky plots further betray that hydrogen annealing can significantly enhance the electric conductivity, via increasing the oxygen vacancies density in the outer layer. In addition, time-dependent measurements indicate the hydrogenated TiO2 nanorods possess excellent chemical stability. Thus, we believe the hydrogenated TiO2 nanorods would be a promising candidate for photoanode in solar water splitting. PMID:27427684

  16. The system water-sodium oxide-silicon dioxide at 200, 250, and 300°

    USGS Publications Warehouse

    Rowe, Jack J.; Fournier, Robert O.; Morey, G.W.

    1967-01-01

    Studies were made of the H2O-Na2O-SiO2 system at its vapor pressure at 200, 250, and 300??. Three different sodium trisilicate hydrates were encountered in the investigation. At 300??, Na2Si3O7??5H2O is found: at 250??, Na2Si3O7??6H2O; and at 200??, Na2Si3O7??11H2O. The liquid immiscibility previously reported to exist in the system was found to be a quenching phenomenon caused by the decomposition of the hydrates to unstable, supersaturated, viscous liquids. Under conditions where equilibrium is maintained, as temperature is lowered, the hydrates decompose to quartz, sodium disilicate, and liquid. The retrograde solubility of sodium disilicate and its tendency to form supersaturated solutions during heating from 25 to 250?? account for higher solubilities reported by others than were found in this study. The solubility of sodium disilicate in water is 26% at 200??, 9% at 250??, and 5% at 300??. Sodium metasilicate solubility is 38% at 200?? and 34% at 250??; this compound is incongruently soluble at 300??.

  17. Inelastic cross-sections and energy loss properties by non-relativistic heavy ions in zirconium dioxide

    NASA Astrophysics Data System (ADS)

    Schofield, Jennifer; Pimblott, Simon M.

    2016-04-01

    A formalism for the inelastic cross-section for electronic collisions of protons and heavier ions in a material is developed based on a quadratic extrapolation of the experimentally based dipole oscillator strength distribution (DOSD) of the material into the energy momentum plane. The approach is tested by calculating various energy loss properties in zirconium dioxide. Mean free path, stopping power and continuous slowing down approximation (csda) range are predicted as a function of ion energy for various incident ions, with the stopping powers compared to experimental data to assess the effectiveness of the methodology. The DOSD is straightforwardly obtained from the experimentally measured energy loss function data below 80 eV and atomic photo-absorption cross-section data above 100 eV. Agreement between the results of the calculation for stopping power and the experimental data is within 10% for all ions when compared for energies greater than the Bragg peak. The discrepancy is larger below the peak due to limitations in the methodology, especially the failure to make corrections for the Barkas and higher order effects and the lack of charge cycling cross-section data.

  18. An investigation of adhesive/adherend and fiber/matrix interactions. Part A: Surface characterization of titanium dioxide, titantium and titanium 6% Al to 4% V powders: Interaction with water, hydrogen chloride and polymers

    NASA Technical Reports Server (NTRS)

    Siriwardane, R. V.; Wightman, J. P.

    1982-01-01

    The titanium dioxide surface is discussed. Polymer adhesive are also discussed. Titanium powders are considered. Characterization techniques are also considered. Interactions with polymers, water vapor, and HCl are reported. Adsorbents are characterized.

  19. Effects of ozone, sulfur dioxide, soil-water deficit, and cultivar on yields of soybean

    SciTech Connect

    Heggestad, H.E.; Lesser, V.M.

    1990-01-01

    The effects of ozone (O3) stress on bean yields and seed size of four soybean cultivars grown in open-top chambers in 1981, 1982, and 1983 are presented. The O3 treatments included charcoal filtered (CF) and nonfiltered (NF) air, and 0.03, 0.06, and 0.09 microL/L O3 added 7 h/d to NF air. The effects of SO2 in concentrations from 0.005 to 0.224 microL/L (4 h/d, 5 d/wk) from the seedling stage to maturity were studied in 1981 and 1982. In 1982 and 1983 the effects of soil moisture stress (SMS) and well-watered (WW) soil conditions on the response of soybean to O3 stress were determined. The primary objective was the evaluation of 3 yr of soybean data from the site using the nonlinear Weibull and the polynomial dose-response models to relate yield responses to O3 exposure doses. The variables also included SO2, soil moisture, and cultivar. The homogeneity of the response equations were compared to permit development of the smallest set of homogeneous equations over years. Both O3 and SO2 negatively impacted bean yields and seed size. No interactions between O3 and SO2 were indicated. With the Weibull model, interactions between O3 and soil moisture were observed with Forrest in 1982 and Williams in 1983. With an O3 level considered typical in soybean production areas compared to background O3 and using all data from 3 yr of experiments, the Weibull model predicted the same (15%) mean yield loss under both SMS and WW regimes.

  20. Sorption and Diffusion of Water Vapor and Carbon Dioxide in Sulfonated Polyaniline as Chemical Sensing Materials

    PubMed Central

    Liang, Qiuhua; Jiang, Junke; Ye, Huaiyu; Yang, Ning; Cai, Miao; Xiao, Jing; Chen, Xianping

    2016-01-01

    A hybrid quantum mechanics (QM)/molecular dynamics (MD) simulation is performed to investigate the effect of an ionizable group (–SO3−Na+) on polyaniline as gas sensing materials. Polymers considered for this work include emeraldine base of polyaniline (EB-PANI) and its derivatives (Na-SPANI (I), (II) and (III)) whose rings are partly monosubstituted by –SO3−Na+. The hybrid simulation results show that the adsorption energy, Mulliken charge and band gap of analytes (CO2 and H2O) in polyaniline are relatively sensitive to the position and the amounts of –SO3−Na+, and these parameters would affect the sensitivity of Na-SPANI/EB-PANI towards CO2. The sensitivity of Na-SPANI (III)/EB-PANI towards CO2 can be greatly improved by two orders of magnitude, which is in agreement with the experimental study. In addition, we also demonstrate that introducing –SO3−Na+ groups at the rings can notably affect the gas transport properties of polyaniline. Comparative studies indicate that the effect of ionizable group on polyaniline as gas sensing materials for the polar gas molecule (H2O) is more significant than that for the nonpolar gas molecule (CO2). These findings contribute in the functionalization-induced variations of the material properties of polyaniline for CO2 sensing and the design of new polyaniline with desired sensing properties. PMID:27128921

  1. Sorption and Diffusion of Water Vapor and Carbon Dioxide in Sulfonated Polyaniline as Chemical Sensing Materials.

    PubMed

    Liang, Qiuhua; Jiang, Junke; Ye, Huaiyu; Yang, Ning; Cai, Miao; Xiao, Jing; Chen, Xianping

    2016-01-01

    A hybrid quantum mechanics (QM)/molecular dynamics (MD) simulation is performed to investigate the effect of an ionizable group (-SO₃(-)Na⁺) on polyaniline as gas sensing materials. Polymers considered for this work include emeraldine base of polyaniline (EB-PANI) and its derivatives (Na-SPANI (I), (II) and (III)) whose rings are partly monosubstituted by -SO₃(-)Na⁺. The hybrid simulation results show that the adsorption energy, Mulliken charge and band gap of analytes (CO₂ and H₂O) in polyaniline are relatively sensitive to the position and the amounts of -SO₃(-)Na⁺, and these parameters would affect the sensitivity of Na-SPANI/EB-PANI towards CO₂. The sensitivity of Na-SPANI (III)/EB-PANI towards CO₂ can be greatly improved by two orders of magnitude, which is in agreement with the experimental study. In addition, we also demonstrate that introducing -SO₃(-)Na⁺ groups at the rings can notably affect the gas transport properties of polyaniline. Comparative studies indicate that the effect of ionizable group on polyaniline as gas sensing materials for the polar gas molecule (H₂O) is more significant than that for the nonpolar gas molecule (CO₂). These findings contribute in the functionalization-induced variations of the material properties of polyaniline for CO₂ sensing and the design of new polyaniline with desired sensing properties. PMID:27128921

  2. Simulating carbon dioxide exchange rates of deciduous tree species: evidence for a general pattern in biochemical changes and water stress response

    PubMed Central

    Reynolds, Robert F.; Bauerle, William L.; Wang, Ying

    2009-01-01

    Background and Aims Deciduous trees have a seasonal carbon dioxide exchange pattern that is attributed to changes in leaf biochemical properties. However, it is not known if the pattern in leaf biochemical properties – maximum Rubisco carboxylation (Vcmax) and electron transport (Jmax) – differ between species. This study explored whether a general pattern of changes in Vcmax, Jmax, and a standardized soil moisture response accounted for carbon dioxide exchange of deciduous trees throughout the growing season. Methods The model MAESTRA was used to examine Vcmax and Jmax of leaves of five deciduous trees, Acer rubrum ‘Summer Red’, Betula nigra, Quercus nuttallii, Quercus phellos and Paulownia elongata, and their response to soil moisture. MAESTRA was parameterized using data from in situ measurements on organs. Linking the changes in biochemical properties of leaves to the whole tree, MAESTRA integrated the general pattern in Vcmax and Jmax from gas exchange parameters of leaves with a standardized soil moisture response to describe carbon dioxide exchange throughout the growing season. The model estimates were tested against measurements made on the five species under both irrigated and water-stressed conditions. Key Results Measurements and modelling demonstrate that the seasonal pattern of biochemical activity in leaves and soil moisture response can be parameterized with straightforward general relationships. Over the course of the season, differences in carbon exchange between measured and modelled values were within 6–12 % under well-watered conditions and 2–25 % under water stress conditions. Hence, a generalized seasonal pattern in the leaf-level physiological change of Vcmax and Jmax, and a standardized response to soil moisture was sufficient to parameterize carbon dioxide exchange for large-scale evaluations. Conclusions Simplification in parameterization of the seasonal pattern of leaf biochemical activity and soil moisture response of

  3. Water Resources Management for Shale Energy Development

    NASA Astrophysics Data System (ADS)

    Yoxtheimer, D.

    2015-12-01

    The increase in the exploration and extraction of hydrocarbons, especially natural gas, from shale formations has been facilitated by advents in horizontal drilling and hydraulic fracturing technologies. Shale energy resources are very promising as an abundant energy source, though environmental challenges exist with their development, including potential adverse impacts to water quality. The well drilling and construction process itself has the potential to impact groundwater quality, however if proper protocols are followed and well integrity is established then impacts such as methane migration or drilling fluids releases can be minimized. Once a shale well has been drilled and hydraulically fractured, approximately 10-50% of the volume of injected fluids (flowback fluids) may flow out of the well initially with continued generation of fluids (produced fluids) throughout the well's productive life. Produced fluid TDS concentrations often exceed 200,000 mg/L, with elevated levels of strontium (Sr), bromide (Br), sodium (Na), calcium (Ca), barium (Ba), chloride (Cl), radionuclides originating from the shale formation as well as fracturing additives. Storing, managing and properly disposisng of these fluids is critical to ensure water resources are not impacted by unintended releases. The most recent data in Pennsylvania suggests an estimated 85% of the produced fluids were being recycled for hydraulic fracturing operations, while many other states reuse less than 50% of these fluids and rely moreso on underground injection wells for disposal. Over the last few years there has been a shift to reuse more produced fluids during well fracturing operations in shale plays around the U.S., which has a combination of economic, regulatory, environmental, and technological drivers. The reuse of water is cost-competitive with sourcing of fresh water and disposal of flowback, especially when considering the costs of advanced treatment to or disposal well injection and lessens

  4. Emissions of Water and Carbon Dioxide from Fossil-Fuel Combustion Contribute Directly to Ocean Mass and Volume Increases

    NASA Astrophysics Data System (ADS)

    Skuce, A. G.

    2014-12-01

    The direct, non-climate, contribution of carbon dioxide and water emissions from fossil-fuel (FF) combustion to the volume and mass of the oceans has been omitted from estimates of sea-level rise (SLR) in IPCC reports. Following the method of Gornitz et al. (1997), H2O emissions are estimated using carbon emissions from the Carbon Dioxide Information Analysis Center, along with typical carbon and hydrogen contents of FF. Historic H2O emissions from 1750 to 2010 amount to 430 ±50 PgH2O, equivalent to 1.2 ±0.2 mmSLR. Sometime in this decade the volume of H2O from historic FF combustion will exceed the volume of Lake Erie (480 km3). CO2 dissolved in the ocean increases the seawater volume by 31-33 mL mol-1 CO2. From 1750 to 2010, 370 ±70 PgCO2 from FF combustion has dissolved in the oceans, causing 0.7 ±0.2 mmSLR. Combined H2O+CO2emissions from FF have therefore added 1.9 ±0.4 mm to sea levels in the Industrial Era. Combustion of FF in 2010 resulted in emissions of 32 PgCO2 and 12 ±1 PgH2O. SLR contributions for that year from FF emissions were 0.033 ±0.005 mm from H2O and 0.011±0.003 mm from dissolved CO2, a total rate of 0.044 ±0.008 mm yr-1. Emissions incorporated in socio-economic models underlying the RCP 8.5 and 2.6 scenarios are used along with concentration-driven CMIP5 Earth System Models results to estimate future sea-level rise from FF combustion. From 2010 to 2100, RCP8.5 and 2.6 models respectively produce 9 ±2 mmSLR and 5 ±1 mmSLR from FF H2O+CO2. For perspective, these amounts are larger than the modelled contributions from loss of glaciers in the Andes. The direct contribution of FF emissions to SLR is small (1-2%) relative to current rates and projected estimates under RCP scenarios up to 2100. The magnitude is similar to SLR estimates from other minor sources such as the melting of floating ice, land-use emissions and produced water from oil operations, none of which are currently included in SLR assessments. As uncertainties in

  5. Energy and phosphorus recovery from black water.

    PubMed

    de Graaff, M S; Temmink, H; Zeeman, G; Buisman, C J N

    2011-01-01

    Source-separated black water (BW) (toilet water) containing 38% of the organic material and 68% of the phosphorus in the total household waste (water) stream including kitchen waste, is a potential source for energy and phosphorus recovery. The energy recovered, in the form of electricity and heat, is more than sufficient for anaerobic treatment, nitrogen removal and phosphorus recovery. The phosphorus balance of an upflow anaerobic sludge blanket reactor treating concentrated BW showed a phosphorus conservation of 61% in the anaerobic effluent. Precipitation of phosphate as struvite from this stream resulted in a recovery of 0.22 kgP/p/y, representing 10% of the artificial phosphorus fertiliser production in the world. The remaining part of the phosphorus ended up in the anaerobic sludge, mainly due to precipitation (39%). Low dilution and a high pH favour the accumulation of phosphorus in the anaerobic sludge and this sludge could be used as a phosphorus-enriched organic fertiliser, provided that it is safe regarding heavy metals, pathogens and micro-pollutants. PMID:22049776

  6. Biological sulfate reduction using gas-lift reactors fed with hydrogen and carbon dioxide as energy and carbon source

    SciTech Connect

    Houten, R.T. van; Hulshoff Pol, L.W.; Lettinga, G. . Dept. of Environmental Technology)

    1994-08-20

    Feasibility and engineering aspects of biological sulfate reduction in gas-lift reactors were studied. Hydrogen and carbon dioxide were used as energy and carbon source. Attention was paid to biofilm formation, sulfide toxicity, sulfate conversion rate optimization, and gas-liquid mass transfer limitations. Sulfate-reducing bacteria formed stable biofilms on pumice particles. Biofilm formation was not observed when basalt particles were used. However, use of basalt particles led to the formation of granules of sulfate-reducing biomass. The sulfate-reducing bacteria, grown on pumice, easily adapted to free H[sub 2]S concentrations up to 450 mg/L. Biofilm growth rate then equilibrated biomass loss rate. These high free H[sub 2]S concentrations caused reversible inhibition rather than acute toxicity. When free H[sub 2]S concentrations were kept below 450 mg/L, a maximum sulfate conversion rate of 30 g SO[sub 4][sup 2[minus

  7. Fuel from Bacteria, CO2, Water, and Solar Energy: Engineering a Bacterial Reverse Fuel Cell

    SciTech Connect

    2010-07-01

    Electrofuels Project: Harvard is engineering a self-contained, scalable Electrofuels production system that can directly generate liquid fuels from bacteria, carbon dioxide (CO2), water, and sunlight. Harvard is genetically engineering bacteria called Shewanella, so the bacteria can sit directly on electrical conductors and absorb electrical current. This current, which is powered by solar panels, gives the bacteria the energy they need to process CO2 into liquid fuels. The Harvard team pumps this CO2 into the system, in addition to water and other nutrients needed to grow the bacteria. Harvard is also engineering the bacteria to produce fuel molecules that have properties similar to gasoline or diesel fuel—making them easier to incorporate into the existing fuel infrastructure. These molecules are designed to spontaneously separate from the water-based culture that the bacteria live in and to be used directly as fuel without further chemical processing once they’re pumped out of the tank.

  8. Optimized Unlike-Pair Interactions for Water-Carbon Dioxide Mixtures described by the SPC/E and EPM2 Models

    SciTech Connect

    Vlcek, Lukas; Chialvo, Ariel A; Cole, David; Cole, David R

    2011-01-01

    The unlike- pair interaction parameters for the SPC/E- EPM2 models have been optimized to reproduce the mutual solubility of water and carbon dioxide at the conditions of liquid- supercritical fluid phase equilibria. An efficient global optimization of the parameters is achieved through an implementation of the coupling parameter approach, adapted to phase equilibria calculations in the Gibbs ensemble, that explicitly corrects for the over- polarization of the SPC/E water molecule in the non- polar CO2 environments. The resulting H2O- CO2 force field reproduces accurately the available experimental solubilities at the two fluid phases in equilibria as well as the corresponding species tracer diffusion coefficients.

  9. Direct phase coexistence molecular dynamics study of the phase equilibria of the ternary methane-carbon dioxide-water hydrate system.

    PubMed

    Michalis, Vasileios K; Tsimpanogiannis, Ioannis N; Stubos, Athanassios K; Economou, Ioannis G

    2016-09-14

    Molecular dynamics simulation is used to predict the phase equilibrium conditions of a ternary hydrate system. In particular, the direct phase coexistence methodology is implemented for the determination of the three-phase coexistence temperature of the methane-carbon dioxide-water hydrate system at elevated pressures. The TIP4P/ice, TraPPE-UA and OPLS-UA forcefields for water, carbon dioxide and methane respectively are used, in line with our previous studies of the phase equilibria of the corresponding binary hydrate systems. The solubility in the aqueous phase of the guest molecules of the respective binary and ternary systems is examined under hydrate-forming conditions, providing insight into the predictive capability of the methodology as well as the combination of these forcefields to accurately describe the phase behavior of the ternary system. The three-phase coexistence temperature is calculated at 400, 1000 and 2000 bar for two compositions of the methane-carbon dioxide mixture. The predicted values are compared with available calculations with satisfactory agreement. An estimation is also provided for the fraction of the guest molecules in the mixed hydrate phase under the conditions examined. PMID:27507133

  10. Energy from Water and Sunlight: Affordable Energy from Water and Sunlight

    SciTech Connect

    2010-01-01

    Broad Funding Opportunity Announcement Project: Sun Catalytix is developing wireless energy-storage devices that convert sunlight and water into renewable fuel. Learning from nature, one such device mimics the ability of a tree leaf to convert sunlight into storable energy. It is comprised of a silicon solar cell coated with catalytic materials, which help speed up the energy conversion process. When this cell is placed in a container of water and exposed to sunlight, it splits the water into bubbles of oxygen and hydrogen. The hydrogen and oxygen can later be recombined to create electricity, when the sun goes down for example. The Sun Catalytix device is novel in many ways: it consists primarily of low-cost, earth-abundant materials where other attempts have required more expensive materials like platinum. Its operating conditions also facilitate the use of less costly construction materials, whereas other efforts have required extremely corrosive conditions.

  11. Sustainable energy development and water supply security in Kamojang Geothermal Field: The Energy-Water Nexus

    NASA Astrophysics Data System (ADS)

    Sofyan, Y.; Nishijima, J.; Fujimitsu, Y.

    2014-12-01

    The Kamojang Geothermal Field (KGF) is a typical vapor dominated hydrothermal system in West Java, Indonesia. This geothermal field is the oldest exploited geothermal field in Indonesia. From 1983 to 2005, more than 160 million tons of steam have been exploited from the KGF and more than 30 million tons of water were injected into the reservoir system. The injected water come from condensed water, local river and ground water. Sustainable production in the geothermal energy development is the ability of the production system applied to sustain the stable production level over long times and to manage the mass balance between production, injection and natural recharge in the geothermal reservoir during exploitation. Mass balance in the reservoir system can be monitored by using time lapse gravity monitoring. Mass variation of hydrodynamic in the reservoir of KGF from 1999 to 2005 is about -3.34 Mt/year while is about -3.78 Mt/year from 1999 to 2008. Another period between 2009 and 2010, mass variation decreased about -8.24 Mt. According to the history of production and injection, natural recharge to the KGF's reservoir is estimated at about 2.77 Mt/year from 1999 to 2005 and 2.75 Mt/year from 1999 to 2008. Between 2009 and 2010, KGF has a bigger mass deficiency rate throughout 200 MWe maintain production. Large amount of fresh water is needed for sustainable geothermal energy production, while the domestic water supply need is also increased. Natural recharge, about 50% of injected water, cooling system, drilling and other production activities in KGF spend large amounts of fresh water. Water consumption for local people around KGF is about 1.46 MT/year. The water volume around KGF of total runoff is the range between dry season 0.07 MT/month and rainy season 4.4 MT/month. The water demands for sustainable geothermal production of KGF and for local people's consumption will increase in the future. Integrated planning between the energy and water sectors in KGF

  12. Renewable energy water supply - Mexico program summary

    SciTech Connect

    Foster, R.

    1997-12-01

    This paper describes a program directed by the US Agency for International Development and Sandia National Laboratory which installed sustainable energy sources in the form of photovoltaic modules and wind energy systems in rural Mexico to pump water and provide solar distillation services. The paper describes the guidelines which appeared most responsible for success as: promote an integrated development program; install quality systems that develop confidence; instill local project ownership; train local industry and project developers; develop a local maintenance infrastructure; provide users training and operations guide; develop clear lines of responsibilities for system upkeep. The paper emphasizes the importance of training. It also presents much collected data as to the characteristics and performance of the installed systems.

  13. Zero point energy of polyhedral water clusters.

    PubMed

    Anick, David J

    2005-06-30

    Polyhedral water clusters (PWCs) are cage-like (H2O)n clusters where every O participates in exactly three H bonds. For a database of 83 PWCs, 8 < or = n < or = 20, geometry was optimized and zero point energy (ZPE) was calculated at the B3LYP/6-311++G** level. ZPE correlates negatively with electronic energy (E0): each increase of 1 kcal/mol in E0 corresponds to a decrease of about 0.11 kcal/mol in ZPE. For each n, a set of four connectivity parameters accounts for 98% or more of the variance in ZPE. Linear regression of ZPE against n and this set gives an RMS error of 0.13 kcal/mol. The contributions to ZPE from stretch modes only (ZPE(S)) and from torsional modes only (ZPE(T)) also correlate strongly with E0 and with each other. PMID:16833891

  14. Chemical Extraction of Carbon Dioxide From Air: A Strategy to Avoid Climate Change and Sustain Fossil Energy?

    NASA Astrophysics Data System (ADS)

    Dubey, M. K.; Ziock, H.; Rueff, G.; Colman, J.; Smith, W. S.

    2002-12-01

    Fossil energy use has benefited humankind but also threatens our environment. It has increased atmospheric carbon dioxide (CO2) levels from 280 ppm to 370 ppm, over the past century. This rise has been linked to with observed ocean acidification and global warming. Projections indicate that atmospheric CO2 could reach 540 to 970 ppm in 2100, with significant effects on our earth system. Given that fossil fuels are plentiful, cost-effective, and energy rich their use will be limited by our ability to mitigate their environmental impact. Carbon management provides potential solutions to this. Current approaches to manage carbon focus on capturing CO2 from large point sources such as power plants. They are limited because they fail to address emissions from transportation and the myriad of dispersed sources that amount to about half of all emissions. To solve this problem we have proposed and are developing direct CO2 extraction from air as a means to capture emissions from all sources [1-3]. It preserves our fuel distribution and transportation systems, and in principle could allow us to restore CO2 to pre-industrial levels. Our concept utilizes atmospheric circulation to capture CO2 directly from the dilute stream in air (370 ppm) by binding it to an adsorbent. Subsequent heating releases the bound CO2 as a pure stream suitable for permanent sequestration. For example, this cycle is favorable for Ca(OH)2 which reacts rapidly with CO2 to form CaCO3. The heat to recover CO2 from CaCO3 is 190 kJ/mole of C, less than half the heat of combustion of 500 kJ/ mole of C for coal. The scale of CO2 air-extraction plants to offset global emissions is large but could be manageable, and favorable relative to renewable sources. We report experiments on CO2 uptake by alkaline solutions as a function of pH, contact time, and mixing. Both active and passive mixing conditions are explored. Gram scale quantities of CO2 has been extracted from air by Ca(OH)2 and the product CaCO3

  15. Carbon dioxide emission from surface water in cascade reservoirs-river system on the Maotiao River, southwest of China

    NASA Astrophysics Data System (ADS)

    Wang, Fushun; Wang, Baoli; Liu, Cong-Qiang; Wang, Yuchun; Guan, Jin; Liu, Xiaolong; Yu, Yuanxiu

    2011-07-01

    Recently, controversies about whether hydropower is still a clean energy have been arisen up with the studies about high CO 2 emission flux from hydroelectric reservoirs in boreal and tropical regions. In this study, four subtropical reservoirs and their related reaches, draining on karstic area in southwest of China, were investigated to understand their CO 2 emission, with monthly sampling strategy from July 2007 to June 2008. pCO 2 values in the surface water of these reservoirs ranged from 38 to 3300 μ atm, indicating that reservoir surface could be not only source but also sink to atmosphere CO 2 in different seasons. In Hongfeng reservoir, the flux of CO 2 from surface water varied from -9 to 70 mmol m -2 d -2 with an average of 15 mmol m -2 d -2, and in Baihua reservoir, it had a range from -8 to 77 mmol m -2 d -2 with an average of 24 mmol m -2 d -2. Hongyan reservoir had similar average flux of CO 2 to Baihua reservoir. Xiuwen had the highest average flux of CO 2 with a value of 47 mmol m -2 d -2 among the studied reservoirs. Downstream the dams discharged by hydropower generation from these reservoirs generally had quite high flux of CO 2, with an average of 489 ± 297 mmol m -2 d -2, which is close to those from tropical rivers. This means that water releasing from these reservoirs would be an important way for CO 2 emission into atmosphere. The results showed that dam construction has significant impacts on the river water chemistry, with abrupt changes in pCO 2, DO, T, pH and SIc in surface water and their outlets. In addition, with the development of thermal gradient in warm seasons, water chemistry along the water column of reservoirs also showed seasonal variations, except in Xiuwen reservoir which only has daily storage capacity.

  16. Formate: an Energy Storage and Transport Bridge between Carbon Dioxide and a Formate Fuel Cell in a Single Device.

    PubMed

    Vo, Tracy; Purohit, Krutarth; Nguyen, Christopher; Biggs, Brenna; Mayoral, Salvador; Haan, John L

    2015-11-01

    We demonstrate the first device to our knowledge that uses a solar panel to power the electrochemical reduction of dissolved carbon dioxide (carbonate) into formate that is then used in the same device to operate a direct formate fuel cell (DFFC). The electrochemical reduction of carbonate is carried out on a Sn electrode in a reservoir that maintains a constant carbon balance between carbonate and formate. The electron-rich formate species is converted by the DFFC into electrical energy through electron release. The product of DFFC operation is the electron-deficient carbonate species that diffuses back to the reservoir bulk. It is possible to continuously charge the device using alternative energy (e.g., solar) to convert carbonate to formate for on-demand use in the DFFC; the intermittent nature of alternative energy makes this an attractive design. In this work, we demonstrate a proof-of-concept device that performs reduction of carbonate, storage of formate, and operation of a DFFC. PMID:26510492

  17. The effects of graded changes in oxygen and carbon dioxide tension on coronary blood velocity independent of myocardial energy demand.

    PubMed

    Boulet, Lindsey M; Stembridge, Mike; Tymko, Michael M; Tremblay, Joshua C; Foster, Glen E

    2016-08-01

    In humans, coronary blood flow is tightly regulated by microvessels within the myocardium to match myocardial energy demand. However, evidence regarding inherent sensitivity of the microvessels to changes in arterial partial pressure of carbon dioxide and oxygen is conflicting because of the accompanied changes in myocardial energy requirements. This study aimed to investigate the changes in coronary blood velocity while manipulating partial pressures of end-tidal CO2 (Petco2) and O2 (Peto2). It was hypothesized that an increase in Petco2 (hypercapnia) or decrease in Peto2 (hypoxia) would result in a significant increase in mean blood velocity in the left anterior descending artery (LADVmean) due to an increase in both blood gases and energy demand associated with the concomitant cardiovascular response. Cardiac energy demand was assessed through noninvasive measurement of the total left ventricular mechanical energy. Healthy subjects (n = 13) underwent a euoxic CO2 test (Petco2 = -8, -4, 0, +4, and +8 mmHg from baseline) and an isocapnic hypoxia test (Peto2 = 64, 52, and 45 mmHg). LADVmean was assessed using transthoracic Doppler echocardiography. Hypercapnia evoked a 34.6 ± 8.5% (mean ± SE; P < 0.01) increase in mean LADVmean, whereas hypoxia increased LADVmean by 51.4 ± 8.8% (P < 0.05). Multiple stepwise regressions revealed that both mechanical energy and changes in arterial blood gases are important contributors to the observed changes in LADVmean (P < 0.01). In summary, regulation of the coronary vasculature in humans is mediated by metabolic changes within the heart and an inherent sensitivity to arterial blood gases. PMID:27233761

  18. Reaction products of chlorine dioxide.

    PubMed Central

    Stevens, A A

    1982-01-01

    Inspection of the available literature reveals that a detailed investigation of the aqueous organic chemistry of chlorine dioxide and systematic identification of products formed during water disinfection has not been considered. This must be done before an informed assessment can be made of the relative safety of using chlorine dioxide as a disinfectant alternative to chlorine. Although trihalomethanes are generally not formed by the action of chlorine dioxide, the products of chlorine dioxide treatment of organic materials are oxidized species, some of which also contain chlorine. The relative amounts of species types may depend on the amount of chlorine dioxide residual maintained and the concentration and nature of the organic material present in the source water. The trend toward lower concentrations of chlorinated by-products with increasing ClO2 concentration, which was observed with phenols, has not been observed with natural humic materials as measured by the organic halogen parameter. Organic halogen concentrations have been shown to increase with increasing chlorine dioxide dose, but are much lower than those observed when chlorine is applied. Aldehydes have been detected as apparent by-products of chlorine dioxide oxidation reactions in a surface water that is a drinking water source. Some other nonchlorinated products of chlorine dioxide treatment may be quinones and epoxides. The extent of formation of these moieties within the macromolecular humic structure is also still unknown. PMID:7151750

  19. Energy and water in aestivating amphibians.

    PubMed

    Carvalho, José E; Navas, Carlos A; Pereira, Isabel C

    2010-01-01

    The physiological mechanisms, behavioral adjustments, and ecological associations that allow animal species to live in extreme environments have evoked the attention of many zoologists. Often, extreme environments are defined as those believed to be limiting to life in terms of water, energetic availability, and temperature. These three elements seem extreme in a number of arid and semi-arid settings that even so have been colonized by amphibians. Because this taxon is usually seen as the quintessential water-dependent ectotherm tetrapods, their presence in a number of semi-arid environments poses a number of intriguing questions regarding microhabitat choice and physiological plasticity, particularly regarding the ecological and physiological correlates of behaviors granting avoidance of the harshest conditions of semi-arid environments. Such avoidance states, generally associated to the concept of aestivation, are currently seen as a diverse and complex phenomena varying from species to species and involving numerous behavioral and metabolic adjustments that enhance survival during the drought. This chapter reviews the physiological ecology of anuran aestivation, mainly from the perspective of water and energy balance. PMID:20069408

  20. Energy losses and mean free paths of electrons in silicon dioxide

    SciTech Connect

    Ashley, J.C.; Anderson, V.E.

    1981-01-01

    Theoretical models and calculations are combined with experimental optical data to determine a model energy-loss function for SiO/sub 2/. Sumrule checks and comparisons with experimental information are made to insure overall consistency of the model. The model energy-loss function is employed to calculate electron inelastic mean free paths and stopping powers for electrons with energies less than or equal to 10 keV in SiO/sub 2/.

  1. Optimal residential water conservation strategies considering related energy in California

    NASA Astrophysics Data System (ADS)

    Escriva-Bou, Alvar; Lund, Jay R.; Pulido-Velazquez, Manuel

    2015-06-01

    Although most freshwater resources are used in agriculture, residential water use is a much more energy intensive user. Based on this, we analyze the increased willingness to adopt water conservation strategies if energy cost is included in the customers' utility function. Using a Water-Energy-CO2 emissions model for household water end uses and probability distribution functions for parameters affecting water and water-related energy use in 10 different locations in California, this research introduces a probabilistic two-stage optimization model considering technical and behavioral decision variables to obtain the most economical strategies to minimize household water and water-related energy bills and costs given both water and energy price shocks. Results can provide an upper bound of household savings for customers with well-behaved preferences, and show greater adoption rates to reduce energy intensive appliances when energy is accounted, resulting in an overall 24% reduction in indoor water use that represents a 30% reduction in water-related energy use and a 53% reduction in household water-related CO2 emissions. Previous use patterns and water and energy rate structures can affect greatly the potential benefits for customers and so their behavior. Given that water and energy are somewhat complementary goods for customers, we use results of the optimization to obtain own-price and cross-price elasticities of residential water use by simulating increases in water and energy prices. While the results are highly influenced by assumptions due to lack of empirical data, the method presented has no precedent in the literature and hopefully will stimulate the collection of additional relevant data.

  2. Water-Energy Correlations: Analysis of Water Technologies, Processes and Systems in Rural and Urban India

    NASA Astrophysics Data System (ADS)

    Murumkar, A. R.; Gupta, S.; Kaurwar, A.; Satankar, R. K.; Mounish, N. K.; Pitta, D. S.; Virat, J.; Kumar, G.; Hatte, S.; Tripathi, R. S.; Shedekar, V.; George, K. J.; Plappally, A. K.

    2015-12-01

    In India, the present value of water, both potable and not potable, bears no relation to the energy of water production. However, electrical energy spent on ground water extraction alone is equivalent to the nation's hydroelectric capacity of 40.1 GWh. Likewise, desalinating 1m3 water of the Bay of Bengal would save three times the energy for potable ground water extraction along the coast of the Bay. It is estimated that every second woman in rural India expends 0.98 kWhe/m3/d for bringing water for household needs. Yet, the water-energy nexus remains to be a topic which is gravely ignored. This is largely caused by factors such as lack of awareness, defective public policies, and intrusive cultural practices. Furthermore, there are instances of unceasing dereliction towards water management and maintenance of the sparsely distributed water and waste water treatment plants across the country. This pollutes the local water across India apart from other geogenic impurities. Additionally, product aesthetics and deceptive advertisements take advantage of the abulia generated by users' ignorance of technical specifications of water technologies and processes in mismanagement of water use. Accordingly, urban residents are tempted to expend on energy intensive water technologies at end use. This worsens the water-energy equation at urban households. Cooking procedures play a significant role in determining the energy expended on water at households. The paper also evaluates total energy expense involved in cultivating some major Kharif and Rabi crops. Manual and traditional agricultural practices are more prominent than mechanized and novel agricultural techniques. The specific energy consumption estimate for different water technologies will help optimize energy expended on water in its life cycles. The implication of the present study of water-energy correlation will help plan and extend water management infrastructure at different locations across India.

  3. Developing Region-Specific Water Energy Intensity Factors for the U.S. Water System

    NASA Astrophysics Data System (ADS)

    Newmark, R. L.; Kandt, A.; Macknick, J.; Daw, J.; Hunsberger, R.; Tomberlin, G.

    2014-12-01

    Energy use by water and wastewater treatment plants equates to approximately 4% of total energy use in the United States. For many municipal water and wastewater treatment plants, energy costs related to pumping, treating, and transporting water represent a large fraction of total costs. The energy intensity of any given utility is heavily variant dependent on location and regional conditions, but energy requirements are generally expected to increase in many regions due to limits on water resources and regulatory requirements for water quality. Quantifying the energy use associated with our nation's water system - the energy needed to convey, extract, treat and distribute water in a particular location - is an important step in understanding the impact and interconnections of the water system on the energy system, in identifying opportunities for savings, and in improving existing modeling and analytic methods for both energy and water systems. Local topography and other regional conditions can greatly affect how much energy a particular water facility utilizes, which in turn affects its relationship with the broader electricity sector. This research evaluates what previous and current efforts have been undertaken to quantify water energy intensity factors (w-EIFs) on a regional scale, provides first steps for cataloguing resulting datasets and findings, and initiates a methodology for developing regional and localized w-EIFs. Improved regional w-EIFs can facilitate national reductions in energy intensity metrics by highlighting areas where energy savings opportunities could provide the greatest benefit.

  4. Predicting carbon dioxide and energy fluxes across global FLUXNET sites with regression algorithms

    NASA Astrophysics Data System (ADS)

    Tramontana, Gianluca; Jung, Martin; Schwalm, Christopher R.; Ichii, Kazuhito; Camps-Valls, Gustau; Ráduly, Botond; Reichstein, Markus; Altaf Arain, M.; Cescatti, Alessandro; Kiely, Gerard; Merbold, Lutz; Serrano-Ortiz, Penelope; Sickert, Sven; Wolf, Sebastian; Papale, Dario

    2016-07-01

    Spatio-temporal fields of land-atmosphere fluxes derived from data-driven models can complement simulations by process-based land surface models. While a number of strategies for empirical models with eddy-covariance flux data have been applied, a systematic intercomparison of these methods has been missing so far. In this study, we performed a cross-validation experiment for predicting carbon dioxide, latent heat, sensible heat and net radiation fluxes across different ecosystem types with 11 machine learning (ML) methods from four different classes (kernel methods, neural networks, tree methods, and regression splines). We applied two complementary setups: (1) 8-day average fluxes based on remotely sensed data and (2) daily mean fluxes based on meteorological data and a mean seasonal cycle of remotely sensed variables. The patterns of predictions from different ML and experimental setups were highly consistent. There were systematic differences in performance among the fluxes, with the following ascending order: net ecosystem exchange (R2 < 0.5), ecosystem respiration (R2 > 0.6), gross primary production (R2> 0.7), latent heat (R2 > 0.7), sensible heat (R2 > 0.7), and net radiation (R2 > 0.8). The ML methods predicted the across-site variability and the mean seasonal cycle of the observed fluxes very well (R2 > 0.7), while the 8-day deviations from the mean seasonal cycle were not well predicted (R2 < 0.5). Fluxes were better predicted at forested and temperate climate sites than at sites in extreme climates or less represented by training data (e.g., the tropics). The evaluated large ensemble of ML-based models will be the basis of new global flux products.

  5. Ab-initio study of fluorine-doped tin dioxide: A prospective catalyst support for water electrolysis

    NASA Astrophysics Data System (ADS)

    Velikokhatnyi, Oleg I.; Kumta, Prashant N.

    2011-02-01

    In an attempt to identify new electrochemically stable catalyst supports for electrolysis of water, the electronic structure of SnO 2 doped with different fluorine concentrations has been calculated using the Vienna ab-initio simulation package (VASP) in the projector-augmented wave (PAW) method with the general gradient approximation (GGA) for conducting the exchange-correlation corrections. The role of fluorine in improving the electronic conductivity is discussed. An increase in the density of electronic states at the Fermi level with increase in the concentration of fluorine incorporated into the main SnO 2 matrix agrees well with published experimental observations. Despite a gradual decrease in the cohesive energies for the fluorine-doped tin oxide with increase in fluorine concentration, the doped material still remains an appropriate candidate for use as catalyst supports in water electrolysis warranting further experimental validation.

  6. Gas exchange, biomass, whole-plant water-use efficiency and water uptake of peach (Prunus persica) seedlings in response to elevated carbon dioxide concentration and water availability.

    PubMed

    Centritto, Mauro; Lucas, Maree E; Jarvis, Paul G

    2002-07-01

    We examined the interactive effects of elevated CO2 concentration ([CO2]) and water stress on growth and physiology of 1-year-old peach (Prunus persica L.) seedlings grown in 10-dm3 pots in open-top chambers with ambient (350 micromol mol-1) or elevated (700 micromol mol-1) [CO2]. Seedlings were supplied weekly with a non-limiting nutrient solution. Water was withheld from half of the plants in each treatment for a 4-week drying cycle, to simulate a sudden and severe water stress during the phase of rapid plant growth. Throughout the growing season, seedlings in elevated [CO2] had higher assimilation rates, measured at the growth [CO2], than seedlings in ambient [CO2], and this caused an increase in total dry mass of about 33%. Stomatal conductance, total water uptake, leaf area and leaf number were unaffected by elevated [CO2]. Because seedlings in the two CO2 treatments had similar transpiration despite large differences in total dry mass, water-use efficiency (WUE) of well-watered and water-stressed seedlings grown in elevated [CO2] was an average of 51 and 63% higher, respectively, than WUE of comparable seedlings grown in ambient [CO2]. Elevated [CO2] enhanced total biomass of water-stressed seedlings by 31%, and thus ameliorated the effects of water limitation. However, the percentage increases in total dry mass between well-watered and water-stressed seedlings were similar in ambient (53%) and elevated (58%) [CO2], demonstrating that there was no interaction between elevated [CO2] and water stress. This finding should be considered when predicting responses of trees to global climate change in hot and dry environments, where predicted temperature increases will raise evaporative demands and exacerbate the effects of drought on tree growth. PMID:12091151

  7. Facile synthesis of silicon carbide-titanium dioxide semiconducting nanocomposite using pulsed laser ablation technique and its performance in photovoltaic dye sensitized solar cell and photocatalytic water purification

    NASA Astrophysics Data System (ADS)

    Gondal, M. A.; Ilyas, A. M.; Baig, Umair

    2016-08-01

    Separation of photo-generated charge carriers (electron and holes) is a major approach to improve the photovoltaic and photocatalytic performance of metal oxide semiconductors. For harsh environment like high temperature applications, ceramic like silicon carbide is very prominent. In this work, 10%, 20% and 40% by weight of pre-oxidized silicon carbide was coupled with titanium dioxide (TiO2) to form nanocomposite semiconductor via elegant pulsed laser ablation in liquid technique using second harmonic 532 nm wavelength of neodymium-doped yttrium aluminium garnet (Nd-YAG) laser. In addition, the effect of silicon carbide concentration on the performance of silicon carbide-titanium dioxide nanocomposite as photo-anode in dye sensitized solar cell and as photocatalyst in photodegradation of methyl orange dye in water was also studied. The result obtained shows that photo-conversion efficiency of the dye sensitized solar cell was improved from 0.6% to 1.65% and the percentage of methyl orange dye removed was enhanced from 22% to 77% at 24 min under ultraviolet-visible solar spectrum in the nanocomposite with 10% weight of silicon carbide. This remarkable performance enhancement could be due to the improvement in electron transfer phenomenon by the presence of silicon carbide on titanium dioxide.

  8. Possibility of liberating solar energy via water arc explosions

    SciTech Connect

    Hathaway, G.; Graneau, P.

    1996-12-31

    This paper reports progress in an experimental investigation, started in the Hathaway laboratory in 1994, which deals with the liberation of intermolecular bonding energy from ordinary water by means of an arc discharge. A new fog accelerator is described and a table of results of the kinetic energies of fog jets is included. The energy of liquid cohesion is stored in water during condensation when the vapor molecules transform their kinetic energy to potential energy. Since the kinetic energy of the vapor was acquired by solar heating of the atmosphere, it is solar energy in concentrated form that is being liberated by water arc explosions. To utilize the internal water energy for electricity generation, large reductions in circuit loss and barrel losses have to be achieved. The objective has been to prove the liberation of internal water energy. The authors have made no effort to optimize the process.

  9. Influence of water quality on the embodied energy of drinking water treatment.

    PubMed

    Santana, Mark V E; Zhang, Qiong; Mihelcic, James R

    2014-01-01

    Urban water treatment plants rely on energy intensive processes to provide safe, reliable water to users. Changes in influent water quality may alter the operation of a water treatment plant and its associated energy use or embodied energy. Therefore the objective of this study is to estimate the effect of influent water quality on the operational embodied energy of drinking water, using the city of Tampa, Florida as a case study. Water quality and water treatment data were obtained from the David L Tippin Water Treatment Facility (Tippin WTF). Life cycle energy analysis (LCEA) was conducted to calculate treatment chemical embodied energy values. Statistical methods including Pearson's correlation, linear regression, and relative importance were used to determine the influence of water quality on treatment plant operation and subsequently, embodied energy. Results showed that influent water quality was responsible for about 14.5% of the total operational embodied energy, mainly due to changes in treatment chemical dosages. The method used in this study can be applied to other urban drinking water contexts to determine if drinking water source quality control or modification of treatment processes will significantly minimize drinking water treatment embodied energy. PMID:24517328

  10. The energy cost of water independence: the case of Singapore.

    PubMed

    Vincent, Lenouvel; Michel, Lafforgue; Catherine, Chevauché; Pauline, Rhétoré

    2014-01-01

    Finding alternative resources to secure or increase water availability is a key issue in most urban areas. This makes the research of alternative and local water resources of increasing importance. In the context of political tension with its main water provider (Malaysia), Singapore has been implementing a comprehensive water policy for some decades, which relies on water demand management and local water resource mobilisation in order to reach water self-sufficiency by 2060. The production of water from alternative resources through seawater desalination or water reclamation implies energy consumptive technologies such as reverse osmosis. In the context of increasing energy costs and high primary energy dependency, this water self-sufficiency objective is likely to be an important challenge for Singapore. The aim of this paper is to quantify the long-term impact of Singapore's water policy on the national electricity bill and to investigate the impact of Singapore's projects to reduce its water energy footprint. We estimate that 2.0% of the Singaporean electricity demand is already dedicated to water and wastewater treatment processes. If its water-energy footprint dramatically increases in the coming decades, ambitious research projects may buffer the energy cost of water self-sufficiency. PMID:25225924

  11. Effects of chlorine or chlorine dioxide during immersion chilling on recovery of bacteria from broiler carcasses and chiller water

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was conducted to determine the microbiological impact of immersion chilling broiler carcasses with chlorine or chlorine dioxide. Eviscerated, pre-chill commercial broiler carcasses were cut into left and right halves along the keel bone, and each half was rinsed (HCR) in 100 mL of 0.1% pept...

  12. Net energy payback and carbon dioxide emissions from helium-3 fusion and wind electrical power plants

    NASA Astrophysics Data System (ADS)

    White, Scott William

    1998-12-01

    A net energy analysis and life cycle CO2 emission analysis is performed on a D3He- fusion power plant using lunar helium-3 and five other electricity-generating power plant technologies, including a wind, conventional coal, PWR and two DT- fusion tokamak (UWMAK-I and ARIES-RS) power plants. The energy payback ratio is the amount of electrical energy produced over the lifetime of the power plant divided by the total amount of energy required to procure the fuel, build, operate, and decommission the power plants. The analysis focused on D3He-fusion and particularly the acquisition of the helium-3 fuel from the Moon. The energy payback ratio varies widely for the six power plants with a low of 11 for a conventional coal plant to a high of 31 for a D3 He-fusion power plant. Energy payback ratios for wind (23), nuclear fission (16), ARIES-RS DT-fusion (24) and UWMAK-I DT- fusion (27) power plants all fall in between. The CO2 emissions for each power plant were calculated from the life-cycle energy' requirements data. The coal plant was responsible for the greatest emissions with 974 tonnes CO2/GWeh, followed by fission and wind (15), ARIES-RS DT-fusion (11), ARIES- 111 D3He-fusion (10) and UWMAK-I DT-fusion power plant (9).

  13. Spatial and temporal variability of heat, water vapor, carbon dioxide, and momentum air-sea exchange in a coastal environment

    NASA Astrophysics Data System (ADS)

    Crawford, Timothy L.; McMillen, Robert T.; Meyers, Tilden P.; Hicks, Bruce B.

    1993-07-01

    Simultaneous eddy correlation measurements from a tower, a boat, and an aircraft platform are used to assess the spatial and temporal variability of heat, moisture, momentum, and CO2 turbulent fluxes in a coastal environment. Dissolved CO2 in the coastal waters and atmospheric CO2 concentrations were continuously measured throughout the experiment. Good agreement was found among the different sensing systems. Air-to-sea gas, momentum, and energy flux density measurements are shown to be achievable from both a boat and an aircraft. The observed 10 W/sq m sensible heat flux was time-invariant but did not vary spatially with surface temperature, which was strongly correlated with ocean depth. The 100 to 200 W/sq m evaporative moisture flux dominated energy exchange and varied both in time and space. No consistent diurnal variation was observed, but the spatial trend also followed surface temperature. CO2 exchange exhibited large spatial and temporal variance.

  14. Mapping the Energy-Water Nexus around the Pacific Rim

    SciTech Connect

    Tidwell, Vincent C.; Moreland, Barbara Denise

    2016-01-01

    The energy-water nexus has been mapped for almost 12,000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Water consumption for energy production was estimated for 9 different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; and, energy processing including oil and biofuels. Conversely, the energy consumed providing water services was mapped for three sectors, drinking water, waste water and seawater desalination. These measures of resource use were put in context by drawing comparison with published measures of water risk. The objective of the mapping was to quantify the energy-water nexus and its variability at the subnational level, pinpoint potential vulnerabilities, and identify opportunities for international collaboration.

  15. Carbon dioxide and water budget of grazed grassland in Grünschwaige (Munich, Bavaria) measured by EC-method with an open path gas analyzer

    NASA Astrophysics Data System (ADS)

    Vetter, S.; Bernhofer, Ch.; Auerswald, K.

    2009-04-01

    Terrestrial ecosystems like grasslands can act as a sink or source for greenhouse gases (GHG) like carbon dioxide. This is important for scientific and political stakeholders as GHG cause the climate change. The eddy covariance method has become a major tool for quantifying such fluxes. It depends, however, on a number of corrections applied to the measured data. The influence of air density is often considered following the WPL-correction (Webb-Pearman-Leuning), which does not take the heating of the instrument surface into account in contrast to the recently published method by Burba et al. (2008). The aim of the study is the comparison of the influence of the two density correction on the CO2 fluxes. The fluxes of water and carbon dioxide were measured with the eddy covariance method from 2002 to 2008 on a grazed grassland site located in Grünschwaige close to Munich (Bavaria) in the South of Germany. The climate in this area is temperate with an annual precipitation of 800 mm and an annual mean temperature of 9 °C. For eddy covariance measurements an open path CO2/H2O analyzer was used. Wind speed (3D) and temperature were measured by a sonic anemometer. The sensible/latent heat flux and the carbon dioxide flux were calculated and corrected using EdiRe. The application of the two density correction methods resulted in important differences of the carbon dioxide flux. The fluxes corrected according to Burba et al. (2008) indicated small CO2 sinks (= negative net carbon exchange) or even sources while the WPL-correction showed (larger) CO2 sinks. Additionally, with both correction methods the results showed a high sensitivity to weather conditions but the effects were stronger using the correction following Burba et al. (2008). The most important drivers of flux variability were precipitation and temperature. The seasonal pattern of precipitation was important especially during the vegetation period. Drought and heat periods, which lasted at last one month like

  16. The Energy-Water-Food Nexus.

    PubMed

    Keairns, D L; Darton, R C; Irabien, A

    2016-06-01

    As the global population grows in size and increasingly lives in cities, and with lifestyles based on greater material consumption, more attention is being given to the integrated system that supplies our energy, water, and food, the Nexus. There is also mounting concern about effects on the Nexus of climate change and damage to the natural environment that provides essential ecosystem services. Nexus analysis applies existing techniques, such as computational modelling and Life Cycle Assessment, but new frameworks and tools are needed, including those that will integrate societal and technical dimensions. Case studies show the vital role played by stakeholder involvement in clarifying issues, priorities, and values. They also demonstrate the importance of an integrated systems view of the complex interrelationships of the Nexus when planning effective remedies. Assessments conclude that transformative social and political change is needed to create new structures, markets, and governance to deal with the Nexus if we are to meet agreed-upon sustainable development goals. PMID:27023661

  17. Optimal urban water conservation strategies considering embedded energy: coupling end-use and utility water-energy models.

    NASA Astrophysics Data System (ADS)

    Escriva-Bou, A.; Lund, J. R.; Pulido-Velazquez, M.; Spang, E. S.; Loge, F. J.

    2014-12-01

    Although most freshwater resources are used in agriculture, a greater amount of energy is consumed per unit of water supply for urban areas. Therefore, efforts to reduce the carbon footprint of water in cities, including the energy embedded within household uses, can be an order of magnitude larger than for other water uses. This characteristic of urban water systems creates a promising opportunity to reduce global greenhouse gas emissions, particularly given rapidly growing urbanization worldwide. Based on a previous Water-Energy-CO2 emissions model for household water end uses, this research introduces a probabilistic two-stage optimization model considering technical and behavioral decision variables to obtain the most economical strategies to minimize household water and water-related energy bills given both water and energy price shocks. Results show that adoption rates to reduce energy intensive appliances increase significantly, resulting in an overall 20% growth in indoor water conservation if household dwellers include the energy cost of their water use. To analyze the consequences on a utility-scale, we develop an hourly water-energy model based on data from East Bay Municipal Utility District in California, including the residential consumption, obtaining that water end uses accounts for roughly 90% of total water-related energy, but the 10% that is managed by the utility is worth over 12 million annually. Once the entire end-use + utility model is completed, several demand-side management conservation strategies were simulated for the city of San Ramon. In this smaller water district, roughly 5% of total EBMUD water use, we found that the optimal household strategies can reduce total GHG emissions by 4% and utility's energy cost over 70,000/yr. Especially interesting from the utility perspective could be the "smoothing" of water use peaks by avoiding daytime irrigation that among other benefits might reduce utility energy costs by 0.5% according to our

  18. Dissolution driven convection for carbon dioxide sequestration: the stability problem

    NASA Astrophysics Data System (ADS)

    Mandre, Shreyas; Guo, Xinjun; Slim, Anja

    2013-11-01

    The dissolution-driven convection in porous media is potentially a rate limiting process for sequestering carbon dioxide in underground aquifers. Super critical carbon dioxide introduced in the aquifer is lighter than the water that fills the surrounding porous rock, and hence quickly rises to the top. However, the solution of carbon dioxide in water is heavier than water. Hence, as the layer of carbon dioxide dissolves in the water, convection may ensue. The threshold criteria for convection is obscured by the continually changing background density profile as the carbon dioxide diffuses through the pores. Commonly used techniques such as frozen coefficient analysis or non-modal theories using transient amplifications yield substantially different results for the threshold, which has been the cause of a debate in the scientific community. We present a general theory for the linear stability of non-autonomous systems and apply it to dissolution driven convection. The theory unifies the classical modal stability theory using eigenvalues, the non-modal approaches using optimal growth of energy and the frozen coefficient analysis. We settle the debate, and demonstrate the existence of a threshold time for convection to commence.

  19. Comparative energy analysis of agricultural crops used for producing ethanol and carbon dioxide emissions

    SciTech Connect

    Aurelio dos Santos, M.; Marland, G.

    1997-12-31

    The present study employs the methodology of energy balance for the analysis undertaken, highlighting the local conditions that influence the process of transformation of biomass into Ethanol, such as: technology, agricultural productivity, environmental conditions, etc.

  20. A carbon dioxide gas sensor by combination of multivalent cation and anion conductors with a water-insoluble oxycarbonate-based auxiliary electrode.

    PubMed

    Imanaka, Nobuhito; Kamikawa, Masayuki; Adachi, Gin-ya

    2002-09-15

    A compact and inexpensive carbon dioxide gas sensor was successfully realized by the combination of a divalent magnesium ionic conductor of Mg0.7(Zr0.85Nb0.15)4P6O24 and a divalent oxide anion conducting ZrO2-Y2O3 solid electrolyte with the water-insoluble Li- and Ba-codoped Nd2O2CO3 solid solution as the auxiliary electrode. The sensor response was continuous and reproducible, and the present sensor also demonstrated a theoretical Nernst response in the atmosphere where water vapor, nitrogen oxides, ammonia, etc., coexist. The exposure of the present sensor to water dew and variation in oxygen concentration does not interfere with the sensor response, which will be a great advantage in applying the in situ practical CO2 detection in combustion exhaust gas atmospheres. PMID:12349986

  1. An investigation into the optimum thickness of titanium dioxide thin films synthesized by using atmospheric pressure chemical vapour deposition for use in photocatalytic water oxidation.

    PubMed

    Hyett, Geoffrey; Darr, Jawwad A; Mills, Andrew; Parkin, Ivan P

    2010-09-10

    Twenty eight films of titanium dioxide of varying thickness were synthesised by using atmospheric pressure chemical vapour deposition (CVD) of titanium(IV) chloride and ethyl acetate onto glass and titanium substrates. Fixed reaction conditions at a substrate temperature of 660 °C were used for all depositions, with varying deposition times of 5-60 seconds used to control the thickness of the samples. A sacrificial electron acceptor system composed of alkaline sodium persulfate was used to determine the rate at which these films could photo-oxidise water in the presence of 365 nm light. The results of this work showed that the optimum thickness for CVD films on titanium substrates for the purposes of water oxidation was ≈200 nm, and that a platinum coating on the reverse of such samples leads to a five-fold increase in the observed rate of water oxidation. PMID:20645333

  2. Energy Sector Adaptation in Response to Water Scarcity

    NASA Astrophysics Data System (ADS)

    Johnson, N. A.; Fricko, O.; Parkinson, S.; Riahi, K.

    2015-12-01

    Global energy systems models have largely ignored the impacts of water scarcity on the energy sector and the related implications for climate change mitigation. However, significant water is required in the production of energy, including for thermoelectric power plant cooling, hydropower generation, irrigation for bioenergy, and the extraction and refining of liquid fuels. With a changing climate and expectations of increasing competition for water from the agricultural and municipal sectors, it is unclear whether sufficient water will be available where needed to support water-intensive energy technologies in the future. Thus, it is important that water use and water constraints are incorporated into energy systems models to better understand energy sector adaptation to water scarcity. The global energy systems model, MESSAGE, has recently been updated to quantify the water consumption and withdrawal requirements of the energy sector and now includes several cooling technologies for addressing water scarcity. This study introduces water constraints into the model to examine whether and how the energy sector can adapt to water scarcity over the next century. In addition, the implications for climate mitigation are evaluated under a scenario in which warming is limited to 2˚C over the pre-industrial level. Given the difficulty of introducing meaningful water constraints into global models, we use a simplistic approach and evaluate a series of scenarios in which the water available to the energy sector is systematically reduced. This approach allows for the evaluation of energy sector adaptations under various levels of water scarcity and can provide insight into how water scarcity, whether from climate change or competing demands, may impact the energy sector in different world regions. This study will provide insight into the following questions: How does the energy sector adapt to water scarcity in different regions? What are the costs associated with adaptation

  3. Global and Regional Evaluation of Energy for Water.

    PubMed

    Liu, Yaling; Hejazi, Mohamad; Kyle, Page; Kim, Son H; Davies, Evan; Miralles, Diego G; Teuling, Adriaan J; He, Yujie; Niyogi, Dev

    2016-09-01

    Despite significant effort to quantify the interdependence of the water and energy sectors, global requirements of energy for water (E4W) are still poorly understood, which may result in biases in projections and consequently in water and energy management and policy. This study estimates water-related energy consumption by water source, sector, and process for 14 global regions from 1973 to 2012. Globally, E4W amounted to 10.2 EJ of primary energy consumption in 2010, accounting for 1.7%-2.7% of total global primary energy consumption, of which 58% pertains to fresh surface water, 30% to fresh groundwater, and 12% to nonfresh water, assuming median energy intensity levels. The sectoral E4W allocation includes municipal (45%), industrial (30%), and agricultural (25%), and main process-level contributions are from source/conveyance (39%), water purification (27%), water distribution (12%), and wastewater treatment (18%). While the United States was the largest E4W consumer from the 1970s until the 2000s, the largest consumers at present are the Middle East, India, and China, driven by rapid growth in desalination, groundwater-based irrigation, and industrial and municipal water use, respectively. The improved understanding of global E4W will enable enhanced consistency of both water and energy representations in integrated assessment models. PMID:27482620

  4. 48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational...

  5. 48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational...

  6. 48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational...

  7. 48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational...

  8. The Efficacy and Potential of Renewable Energy from Carbon Dioxide that is Sequestered in Sedimentary Basin Geothermal Resources

    NASA Astrophysics Data System (ADS)

    Bielicki, J. M.; Adams, B. M.; Choi, H.; Saar, M. O.; Taff, S. J.; Jamiyansuren, B.; Buscheck, T. A.; Ogland-Hand, J.

    2015-12-01

    Mitigating climate change requires increasing the amount of electricity that is generated from renewable energy technologies and while simultaneously reducing the amount of carbon dioxide (CO2) that is emitted to the atmosphere from present energy and industrial facilities. We investigated the efficacy of generating electricity using renewable geothermal heat that is extracted by CO2 that is sequestered in sedimentary basins. To determine the efficacy of CO2-Geothermal power production in the United States, we conducted a geospatial resource assessment of the combination of subsurface CO2 storage capacity and heat flow in sedimentary basins and developed an integrated systems model that combines reservoir modeling with power plant modeling and economic costs. The geospatial resource assessment estimates the potential resource base for CO2-Geothermal power plants, and the integrated systems model estimates the physical (e.g., net power) and economic (e.g., levelized cost of electricity, capital cost) performance of an individual CO2-Geothermal power plant for a range of reservoir characteristics (permeability, depth, geothermal temperature gradient). Using coupled inverted five-spot injection patterns that are common in CO2-enhanced oil recovery operations, we determined the well pattern size that best leveraged physical and economic economies of scale for the integrated system. Our results indicate that CO2-Geothermal plants can be cost-effectively deployed in a much larger region of the United States than typical approaches to geothermal electricity production. These cost-effective CO2-Geothermal electricity facilities can also be capacity-competitive with many existing baseload and renewable energy technologies over a range of reservoir parameters. For example, our results suggest that, given the right combination of reservoir parameters, LCOEs can be as low as $25/MWh and capacities can be as high as a few hundred MW.

  9. CONCEPTUAL DESIGN OF OPTIMIZED FOSSIL ENERGY SYSTEMS WITH CAPTURE AND SEQUESTRATION OF CARBON DIOXIDE

    SciTech Connect

    Joan M. Ogden

    2004-05-01

    In this third semi-annual progress report, we describe research results from an ongoing study of fossil hydrogen energy systems with CO{sub 2} sequestration. This work was performed under NETL Award No. DE-FC26-02NT41623, during the six-month period September 2003 through March 2004. The primary objective of the study is to better understand system design issues and economics for a large-scale fossil energy system co-producing H{sub 2} and electricity with CO{sub 2} sequestration. This is accomplished by developing analytic and simulation methods for studying the entire system in an integrated way. We examine the relationships among the different parts of a hydrogen energy system, and attempt to identify which variables are the most important in determining both the disposal cost of CO{sub 2} and the delivered cost of H{sub 2}. A second objective is to examine possible transition strategies from today's energy system toward one based on fossil-derived H{sub 2} and electricity with CO{sub 2} sequestration. We are carrying out a geographically specific case study of development of a fossil H{sub 2} system with CO{sub 2} sequestration, for the Midwestern United States, where there is presently substantial coal conversion capacity in place, coal resources are plentiful and potential sequestration sites in deep saline aquifers are widespread.

  10. CONCEPTUAL DESIGN OF OPTIMIZED FOSSIL ENERGY SYSTEMS WITH CAPTURE AND SEQUESTRATION OF CARBON DIOXIDE

    SciTech Connect

    Joan M. Ogden

    2003-12-01

    In this second semi-annual progress report, we describe research results from an ongoing study of fossil hydrogen energy systems with CO{sub 2} sequestration. This work was performed under NETL Award No. DE-FC26-02NT41623, during the six-month period March 2003 through September 2003. The primary objective of the study is to better understand system design issues and economics for a large-scale fossil energy system co-producing H{sub 2} and electricity with CO{sub 2} sequestration. This is accomplished by developing analytic and simulation methods for studying the entire system in an integrated way. We examine the relationships among the different parts of a hydrogen energy system, and attempt to identify which variables are the most important in determining both the disposal cost of CO{sub 2} and the delivered cost of H{sub 2}. A second objective is to examine possible transition strategies from today's energy system toward one based on fossil-derived H{sub 2} and electricity with CO{sub 2} sequestration. We are carrying out a geographically specific case study of development of a fossil H{sub 2} system with CO{sub 2} sequestration, for the Midwestern United States, where there is presently substantial coal conversion capacity in place, coal resources are plentiful and potential sequestration sites in deep saline aquifers are widespread.

  11. Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide

    SciTech Connect

    Joan M. Ogden

    2005-11-29

    In this final progress report, we describe research results from Phase I of a technical/economic study of fossil hydrogen energy systems with CO{sub 2} sequestration. This work was performed under NETL Award No. DE-FC26-02NT41623, during the period September 2002 through August 2005 The primary objective of the study is to better understand system design issues and economics for a large-scale fossil energy system co-producing H{sub 2} and electricity with CO{sub 2} sequestration. This is accomplished by developing analytic and simulation methods for studying the entire system in an integrated way. We examine the relationships among the different parts of a hydrogen energy system, and identify which variables are the most important in determining both the disposal cost of CO{sub 2} and the delivered cost of H{sub 2}. A second objective is to examine possible transition strategies from today's energy system toward one based on fossil-derived H{sub 2} and electricity with CO{sub 2} sequestration. We carried out a geographically specific case study of development of a fossil H{sub 2} system with CO{sub 2} sequestration, for the Midwestern United States, where there is presently substantial coal conversion capacity in place, coal resources are plentiful and potential sequestration sites in deep saline aquifers are widespread.

  12. Chlorine dioxide and hemodialysis

    SciTech Connect

    Smith, R.P. . Dept. of Pharmacology and Toxicology)

    1989-05-01

    Because it has little or no tendency to generate carcinogenic trihalomethanes such as chloroform, chlorine dioxide is an attractive alternative to chlorine for drinking water disinfection. There are, however, concerns about its acute toxicity, and the toxic effects of its by-products, chlorite and chlorate. The human experience with chlorine dioxide in both controlled, prospective studies and in actual use situations in community water supplies have as yet failed to reveal adverse health effects. The EPA has recommended standards of 0.06 mg/L for chlorine dioxide and standards of 0.007 mg/L for chlorite and chlorate in drinking water. Among groups who may be at special risk from oxychlorines in drinking water are patients who must undergro chronic extracorporeal hemodialysis. Although even units for home hemodialysis are supposed to be equipped with devices which effectively remove oxychlorines, there is a always a possibility of operator error or equipment failure. When the equipment is adequately maintained, it is likely that dialysis patients will have more intensive exposures from drinking water than from dialysis fluids despite the much larger volumes of water that are involved in dialysis. This paper discusses a hemodialysis and the standards and effects of oxychlorines. 90 refs., 2 tabs.

  13. Water Power for a Clean Energy Future (Fact Sheet)

    SciTech Connect

    Not Available

    2010-07-01

    Water power technologies harness energy from rivers and oceans to generate electricity for the nation's homes and businesses, and can help the United States meet its pressing energy, environmental, and economic challenges. Water power technologies; fall into two broad categories: conventional hydropower and marine and hydrokinetic technologies. Conventional hydropower uses dams or impoundments to store river water in a reservoir. Marine and hydrokinetic technologies capture energy from waves, tides, ocean currents, free-flowing rivers, streams, and ocean thermal gradients.

  14. Monolithic co-aerogels of carbon/titanium dioxide as three dimensional nanostructured electrodes for energy storage

    NASA Astrophysics Data System (ADS)

    Yang, Sungwoo; Cai, Yue; Cheng, Yingwen; Varanasi, C. V.; Liu, Jie

    2012-11-01

    Conductive fillers, such as amorphous carbon, carbon nanotube and graphene etc., are generally mixed with nanostructured metal oxide materials to improve the performance of electrode materials in energy storage devices. However, the conductive framework that provides path for electric conduction does not normally form a well-connected and robust 3-D network to ensure optimized ions transport. Here, we report a convenient, inexpensive and scalable method for synthesizing hybrid carbon and titanium dioxide co-gels and co-aerogels to improve the electrochemical capacity by combining both the lithium insertion and the surface storage mechanisms in Li ion batteries (LIBs) anodes. A monolithic piece of a hybrid C/TiO2 co-aerogel can be directly used as an active electrode without the addition of binders, such as polyvinylidene fluoride (PVDF). As a result, the performance of LIB anodes using the hybrid co-aerogel is significantly improved over current LIBs based on carbon/titanium oxide composites. The reversible discharge capacity was stabilized at ˜400 mAh g-1 at a 168 mA g-1 scan rate and an operating voltage between 3.0 and 0.05 V vs. Li+/Li with excellent cyclic capacity retention. This approach, however, is not limited to only C/TiO2 system but can be extended to other metal oxides to form co-gels with carbon to improve their potential use in numerous electrochemical, photocatalytic, and photoelectronic devices.

  15. Ab initio potential energy surface for methane and carbon dioxide and application to vapor-liquid coexistence

    NASA Astrophysics Data System (ADS)

    Pai, Sung Jin; Bae, Young Chan

    2014-08-01

    A six-dimensional intermolecular potential energy surface for a rigid methane (CH4) and carbon dioxide (CO2) dimer was developed from the counterpoise-corrected supermolecular approach at the CCSD(T) level of theory. A total of 466 grid points distributed to 46 orientations were calculated from the complete basis set limit extrapolation based on up to aug-cc-pVQZ basis set. A modified site-site pair potential function was proposed for rapid representation of the high level ab initio calculations. A nonadditive three-body interaction was represented by the Axilrod-Teller-Muto expression for mixtures with the polarizability and the London dispersion constant of each molecule. Second to fourth virial coefficients of CH4 and CO2 mixtures were calculated using both the Mayer sampling Monte Carlo method and the present potential functions. The virial equation of state derived from these coefficients was used to predict the pVT values and showed good agreement with experimental data below 200 bar at 300 K. The vapor-liquid coexistence curves of pure CH4, CO2 and their mixtures were presented with the aid of Gibbs ensemble Monte Carlo simulations. The predicted tie lines agreed with the experimental data within the uncertainties up to near the critical point.

  16. Pre-injection Comparison of Methods for Sampling Formation Water and Associated Gas from a Monitoring Well at a Carbon Dioxide Injection Site, Citronelle Oil Field, Alabama

    NASA Astrophysics Data System (ADS)

    Conaway, C.; Thordsen, J. J.; Manning, M. A.; Cook, P. J.; Abedini, A. A.; Trautz, R. C.; Thomas, B.; Kharaka, Y. K.

    2012-12-01

    The chemical composition of formation water and associated gases from the lower Cretaceous Paluxy Formation was determined using four different sampling methods at a well in the Citronelle Oil Field, Alabama, a site that will be used for a carbon dioxide injection experiment. Prior to each of the two sampling periods, the well was cleaned from the drilling fluids and KCl solutions by producing at least three pore volumes of formation water. Accurate measurements of the chemical composition of groundwater or formation water, including dissolved gasses, and gas samples is essential in understanding subsurface geochemical processes occurring as a result of geologic carbon dioxide injection, which is used for enhanced oil recovery (EOR) and has been proposed as a means of carbon sequestration. In this study, formation water and gas samples for geochemical analyses were obtained from well D-9-8 #2 at Citronelle using nitrogen lift, submersible pump, U-Tube, and a downhole (Kuster) sampler. Field chemical analyses included electrical conductivity, hydrogen sulfide, alkalinity, and pH, and laboratory analyses included major, minor and trace elements by mass spectrometry and ion chromatography, dissolved carbon, organic acid anions, free and dissolved gas species. The formation water obtained from this well is a Na-Ca-Cl brine with a salinity of 160,000 and 200,000 mg/L total dissolved solids (TDS). Differences were evident between sampling methodologies, particularly in pH, Fe and alkalinity measurements. The results of the comparison demonstrate the difficulty and importance of preserving volatile analytes in samples, with the downhole sampler and U-Tube system performing most favorably in this aspect.

  17. Thirst for Power: Energy, Water and Human Survival

    NASA Astrophysics Data System (ADS)

    Webber, M.

    2015-12-01

    Energy and water are precious resources, and they are interconnected. The energy sector uses a lot of water -- the thermoelectric power sector alone is the largest user of water in the U.S., withdrawing 200 billion gallons daily for powerplant cooling. Conversely, the water sector is responsible for over twelve percent of national energy consumption for moving, pumping, treating, and heating water. This interdependence means that droughts can cause energy shortages, and power outages can bring the water system to a halt. It also means that water efficiency is a pathway to energy efficiency and vice versa. This talk will give a big-picture overview of global energy and water trends to describe how they interact, what conflicts are looming, and how they can work together. This talk will include the vulnerabilities and cross-cutting solutions such as efficient markets and smart technologies that embed more information about resource management. It will include discussion of how population growth, economic growth, climate change, and short-sighted policies are likely to make things worse. Yet, more integrated planning with long-term sustainability in mind along with cultural shifts, advanced technologies, and better design can avert such a daunting future. Combining anecdotes and personal stories with insights into the latest science of energy and water, this talk will identify a hopeful path toward wise, long-range water-energy decisions and a more reliable and abundant future for humanity.

  18. Aqueous manganese dioxide ink for paper-based capacitive energy storage devices.

    PubMed

    Qian, Jiasheng; Jin, Huanyu; Chen, Bolei; Lin, Mei; Lu, Wei; Tang, Wing Man; Xiong, Wei; Chan, Lai Wa Helen; Lau, Shu Ping; Yuan, Jikang

    2015-06-01

    We report a simple approach based on a chemical reduction method to synthesize aqueous inorganic ink comprised of hexagonal MnO2 nanosheets. The MnO2 ink exhibits long-term stability and continuous thin films can be formed on various substrates without using any binder. To obtain a flexible electrode for capacitive energy storage, the MnO2 ink was printed onto commercially available A4 paper pretreated with multiwalled carbon nanotubes. The electrode exhibited a maximum specific capacitance of 1035 F g(-1) (91.7 mF cm(-2)). Paper-based symmetric and asymmetric capacitors were assembled, which gave a maximum specific energy density of 25.3 Wh kg(-1) and a power density of 81 kW kg(-1). The device could maintain a 98.9% capacitance retention over 10 000 cycles at 4 A g(-1). The MnO2 ink could be a versatile candidate for large-scale production of flexible and printable electronic devices for energy storage and conversion. PMID:25891235

  19. Carbon dioxide and water vapor production at rest and during exercise. A report on data collection for the Crew and Thermal Systems Division

    NASA Technical Reports Server (NTRS)

    Lee, Stuart M. C.; Siconolfi, Steven F.

    1994-01-01

    The current environmental control device in the shuttle uses lithium hydroxide (LiOH) filter canisters to remove carbon dioxide (CO2) from the cabin air, requiring several bulky filter canisters that can only be used once and must be changed frequently. To alleviate a stowage problem and decrease launch weight, the Crew and Thermal Systems Division (CTSD) at the NASA Johnson Space Center has been researching a system to be used on future shuttle missions. This system uses two beds of solid amine material to absorb CO2 and water, later desorbing them to space vacuum. In this way the air scrubbing medium is regenerable and reusable. To identify the efficacy of this regenerable CO2 removal system (RCRS), CTSD began investigations in the shuttle mockup. The purpose of this investigation was to support the CTSD program by determining mean levels of carbon dioxide and water vapor production in normal, healthy males and females age-matched with the astronaut corps. Subjects' responses were measured at rest and during exercise at intensity levels equivalent to normal shuttle operation activities. The results were used to assess the adjustments made to RCRS and are reported as a reference for future investigations in shuttle environmental control.

  20. Infrared spectroscopic concentration measurements of carbon dioxide and gaseous water in harsh environments with a fiber optical sensor by using the HITEMP database

    NASA Astrophysics Data System (ADS)

    Grosch, A.; Wackerbarth, H.; Thiele, O.; Berg, T.; Beckmann, L.

    2014-01-01

    This study presents a method for concentration measurements of carbon dioxide and gaseous water. CO2 and H2O are infrared active substances with strong overlapping absorption bands in the spectral range at about 3700 cm-1 due to the excitation of molecule vibrations. The analysis is based on the HITEMP database which was used to quantify spectral integrated transmission measurements. A fiber optical spark plug sensor with an absorption path close to the electrodes was used for in-cylinder measurements of carbon dioxide and gaseous water. The sensor system consists of a tungsten halide lamp as a broadband source and two infrared detectors with different optical bandpass filters. The developed calibration procedure was evaluated by using a heatable optical cell. Various gas compositions were analyzed at pressures up to 1800 kPa within a temperature range from 298 to 573 K under well defined conditions. Finally, the calibration procedure was adapted for in situ measurements of CO2 and H2O concentrations in the cylinder of a spark ignited (SI) engine. Concentrations were measured time resolved for motored as well as fired engine conditions.

  1. Water-energy modelling: Adaptation to water scarcity

    NASA Astrophysics Data System (ADS)

    Pereira-Cardenal, Silvio J.

    2016-02-01

    Combined water and power models are important to predict how changes in one resource will impact the other. A new global assessment of hydropower and thermoelectric power plants predicts future vulnerabilities arising from climate-change-induced water constraints and tests possible adaptation options.

  2. Water supply and demand in an energy supply model

    SciTech Connect

    Abbey, D; Loose, V

    1980-12-01

    This report describes a tool for water and energy-related policy analysis, the development of a water supply and demand sector in a linear programming model of energy supply in the United States. The model allows adjustments in the input mix and plant siting in response to water scarcity. Thus, on the demand side energy conversion facilities can substitute more costly dry cooling systems for conventional evaporative systems. On the supply side groundwater and water purchased from irrigators are available as more costly alternatives to unappropriated surface water. Water supply data is developed for 30 regions in 10 Western states. Preliminary results for a 1990 energy demand scenario suggest that, at this level of spatial analysis, water availability plays a minor role in plant siting. Future policy applications of the modeling system are discussed including the evaluation of alternative patterns of synthetic fuels development.

  3. Atmospheric water on Mars, energy estimates for extraction

    NASA Technical Reports Server (NTRS)

    Meyer, Tom

    1991-01-01

    The Mars atmosphere is considered as a resource for water to support a human expedition. Information obtained from the Viking mission is used to estimate the near-surface water vapor level. The variability over the diurnal cycle is examined and periods of greatest water abundance are identified. Various methods for extracting atmospheric water are discussed including energy costs and the means for optimizing water extraction techniques.

  4. Evaluation of doubly labeled water for measuring energy expenditure during changing nutrition

    SciTech Connect

    Jones, P.J.; Winthrop, A.L.; Schoeller, D.A.; Filler, R.M.; Swyer, P.R.; Smith, J.; Heim, T.

    1988-05-01

    Change in abundance of /sup 2/H and /sup 18/O in dietary water during a doubly labeled water energy period may introduce error into the calculated carbon dioxide production rate (RCO/sub 2/). To examine the accuracy of /sup 2/H/sub 2/(/sup 18/)O during changing nutritional regimens, we compared /sup 2/H/sub 2/(/sup 18/)O and periodic open-circuit respiratory gas exchange (RGE) in postsurgical infants who were changing from parenteral to alternative parenteral and/or oral nutrition. The two methods were compared before and after correction for shifts in isotopic abundance of the infant water pools during the energy-expenditure period. Baseline corrections were predicted using the difference between abundances of the initial body water and final nutrient solutions. Before isotopic correction, /sup 2/H/sub 2/(/sup 18/)O underestimated RCO/sub 2/ in eight subjects by 11.8 +/- 20.1% (mean +/- SD). After correction, agreement between the two methods improved; the underestimate was then -8.7 +/- 12.9%. To obtain maximum precision of /sup 2/H/sub 2/(/sup 18/)O, subjects should be maintained on the same nutritional regimen before and during the study unless valid correction formulae are used.

  5. Zebra mussel control using periodic chlorine dioxide treatments. Final report

    SciTech Connect

    Mussalli, Y.G.; Martin, P.D.

    1995-11-01

    Chlorine dioxide was injected into the water intakes at two power plants in Illinois and one in Indiana in an effort to eradicate the existing population of zebra mussels and mitigate further settlement in station river water cooling systems. Results of the treatments at Illinois Power Company`s Wood River Station on the Mississippi River, Central Illinois Public Service`s Meredosia Station on the Illinois River, and SI Energy`s Gallagher Station on the Ohio River are reported. Treatments were performed on a turnkey basis, with three treatments performed at Meredosia Station in 1994, six treatments performed at Wood River Station between July 1993 and September 1994, and 2 treatments performed at Gallagher Station in 1994. For each treatment, a contractor installed and operated a portable chlorine dioxide generator, monitored water quality and oxidant levels, and provided and monitored bioboxes containing test mussels. Results of the treatments were very favorable, indicating a good potential for periodic treatments with chlorine dioxide to control zebra mussel infestations in the raw water systems of power plants and other industrial facilities. Some difficulties with the chlorine dioxide generation system and cold temperature effects reduced the treatment effectiveness, particularly the second treatment at Gallagher Station. Average induced mortalities ranged from 70 to 100% at Wood River, 87 to 92% at Meredosia, and 30 to 100% at Gallagher for native mussels. Dechlorination successfully kept total oxidant residual levels at or below 0.05 ppM during all treatments at all stations.

  6. International energy trade impacts on water resource crises: an embodied water flows perspective

    NASA Astrophysics Data System (ADS)

    Zhang, J. C.; Zhong, R.; Zhao, P.; Zhang, H. W.; Wang, Y.; Mao, G. Z.

    2016-07-01

    Water and energy are coupled in intimate ways (Siddiqi and Anadon 2011 Energy Policy 39 4529–40), which is amplified by international energy trade. The study shows that the total volume of energy related international embodied water flows averaged 6298 Mm3 yr‑1 from 1992–2010, which represents 10% of the water used for energy production including oil, coal, gas and electricity production. This study calculates embodied water import and export status of 219 countries from 1992 to 2010 and embodied water flow changes of seven regions over time (1992/2000/2010). In addition, the embodied water net export risk-crisis index and net embodied water import benefit index are established. According to the index system, 33 countries export vast amounts of water who have a water shortage, which causes water risk and crisis related to energy trade. While 29 countries abate this risk due to their rich water resource, 45 countries import embodied water linked to energy imports. Based on the different status of countries studied, the countries were classified into six groups with different policy recommendations.

  7. 1998 federal energy and water management award winners

    SciTech Connect

    1998-10-28

    Energy is a luxury that no one can afford to waste, and many Federal Government agencies are becoming increasingly aware of the importance of using energy wisely. Thoughtful use of energy resources is important, not only to meet agency goals, but because energy efficiency helps improve air quality. Sound facility management offers huge savings that affect the agency`s bottom line, the environment, and workplace quality. In these fiscally-modest times, pursuing sound energy management programs can present additional challenges for energy and facility managers. The correct path to take is not always the easiest. Hard work, innovation, and vision are characteristic of those who pursue energy efficiency. That is why the Department of energy, Federal Energy Management Program (FEMP) is proud to salute the winners of the 1998 Federal Energy and Water Management Award. The 1998 winners represent the kind of 21st century thinking that will help achieve widespread Federal energy efficiency. In one year, the winners, through a combination of public and private partnerships, saved more than $222 million and 10.5 trillion Btu by actively identifying and implementing energy efficiency, water conservation, and renewable energy projects. Through their dedication, hard work, ingenuity, and success, the award winners have also inspired others to increase their own efforts to save energy and water and to more aggressively pursue the use of renewable energy sources. The Federal Energy and Water Management Awards recognize the winners` contributions and ability to inspire others to take action.

  8. GROUND WATER REMEDIATION POWERED WITH RENEWABLE ENERGY

    EPA Science Inventory

    Technical challenge: Resource conservation has become a critical concept in the remediation of contaminated ground water supplies. Ground water remedies which include surface discharge of treated ground water are often viewed as wasteful and non-sustainable....

  9. Energy Efficient Commercial Refrigeration with Carbon Dioxide Refrigerant and Scroll Expanders

    SciTech Connect

    Dieckmann, John

    2013-04-04

    Current supermarket refrigeration systems are built around conventional fluorocarbon refrigerants – HFC-134a and the HFC blends R-507 and R404A, which replaced the CFC refrigerants, R-12 and R-502, respectively, used prior to the Montreal Protocol phase out of ozone depleting substances. While the HFC refrigerants are non-ozone depleting, they are strong greenhouse gases, so there has been continued interest in replacing them, particularly in applications with above average refrigerant leakage. Large supermarket refrigeration systems have proven to be particularly difficult to maintain in a leak-tight condition. Refrigerant charge losses of 15% of total charge per year are the norm, making the global warming impact of refrigerant emissions comparable to that associated with the energy consumption of these systems.

  10. Molecular level energy and electron transfer processes at nanocrystalline titanium dioxide interfaces

    NASA Astrophysics Data System (ADS)

    Farzad, Fereshteh

    This thesis describes photo-induced molecular electron and energy transfer processes occurring at nanocrystalline semiconductor interfaces. The Introductory Chapter provides background and describes how these materials may be useful for solar energy conversion. In Chapter 2, results describing excitation of Ru(deeb)(bpy)2 2+, bis(2,2'-bipyridine)(2,2'-bipyridine-4,4 '-diethylester)ruthenium(II) hexafluorophosphate, bound to nanocrystalline TiO2 thin films, immersed in an acetonitrile bath are presented. The data indicates that light excitation forms predominately long-lived metal-to-ligand charge-transfer, MLCT, excited states under these conditions. Modeling of the data as a function of irradiance has been accomplished assuming parallel unimolecular and bimolecular excited state deactivation processes. The quantum yield for excited state formation depends on the excitation irradiance, consistent with triplet-triplet annihilation processes that occur with k > 1 x 108 s-1. Chapter 3 extends the work described in Chapter 2 to LiClO4 acetonitrile solutions. Li+ addition results in a red shift in the MLCT absorption and photoluminescence, PL, and a concentration dependent quenching of the PL intensity on TiO2. The Li+ induced spectroscopic changes were found to be reversible by varying the electrolyte composition. A second-order kinetic model quantified charge recombination transients. A model is proposed wherein Li+ ion adsorption stabilizes TiO2 acceptor states resulting in energetically more favorable interfacial electron transfer. The photophysical and photoelectrochemical properties of porous nanocrystalline anatase TiO2 electrodes modified with Ru(deeb)(bpy)2 2+, Os(deeb)(bpy)22+, and mixtures of both are described in Chapters 4 and 5. In regenerative solar cells with 0.5 M LiI/0.05 M I2 acetonitrile electrolyte, both compounds efficiently inject electrons into TiO2 producing monochromatic incident photon-to-current efficiencies (IPCE), IPCE (460 nm) = 0.70 + 0

  11. Continuous measurement of methane and carbon dioxide concentrations in surface waters based on off-axis integrated cavity output spectroscopy (ICOS)

    NASA Astrophysics Data System (ADS)

    Gülzow, W.; Rehder, G. J.; Schneider von Deimling, J.; Sadkowiak, B.; Schneider, B.

    2010-12-01

    Though systems to assess the sea surface concentrations of climate-relevant trace gases were first designed three decades ago, only for carbon dioxide the technology has advanced far enough to allow quasi non-maintained data acquisition based on ships of opportunity. One of the reasons for this is the fact that until now, only for carbon dioxide the concentrations in surface waters are high enough to allow the use of non gas-consuming, IR-spectroscopy-based detection of the gas, usually provided by a LICOR gas detector. This causes problems to estimate the marine fluxes of other important trace gases such as methane or nitrous oxide, which are usually strongly bound to coastal and estuarine zones, and thus would require long-term, spatio-temporal data acquisition for a robust marine source assessment. Here, we present a new system which allows to measure methane and carbon dioxide in surface waters autonomously and continuously using a non-gas consuming optical detection system. The analytical setup consists of a CH4/CO2- Analyzer (MCA; Los Gatos Research) joint with a bubble-type equilibration system. The analyzer uses off-axis integrated cavity output spectroscopy (ICOS) which combines two highly specific band lasers with a set of strongly reflective mirrors to obtain an effective laser path length of several kilometers. While a first system was installed in November 2009 on the cargo ship Finnmaid (Finnpartner) that commutes regularly between Travemünde (Germany) and Helsinki (Finnland) in the Baltic Sea, a 2nd system was build to be used on board of research vessels and successfully monitored the gas concentrations along the ship track during a 3,5 week long research cruise of RV Maria S. Merian (MSM16/1) in the Baltic Sea in August, 2010. Very low post-bloom surface pCO2 values and distinct patterns of surface methane concentrations pointing to local sources were amongst the results of the surface survey. During the expedition, the system was also linked to

  12. CARBON DIOXIDE FIXATION.

    SciTech Connect

    FUJITA,E.

    2000-01-12

    Solar carbon dioxide fixation offers the possibility of a renewable source of chemicals and fuels in the future. Its realization rests on future advances in the efficiency of solar energy collection and development of suitable catalysts for CO{sub 2} conversion. Recent achievements in the efficiency of solar energy conversion and in catalysis suggest that this approach holds a great deal of promise for contributing to future needs for fuels and chemicals.

  13. Energy and water in the Western and Texas interconnects.

    SciTech Connect

    Tidwell, Vincent Carroll

    2010-08-01

    The Department of Energy's Office of Electricity has initiated a $60M program to assist the electric industry in interconnection-level analysis and planning. The objective of this effort is to facilitate the development or strengthening of capabilities in each of the three interconnections serving the lower 48 states of the United States, to prepare analyses of transmission requirements under a broad range of alternative futures and develop long-term interconnection-wide transmission expansion plans. The interconnections are the Western Interconnection, the Eastern Interconnection, and the Texas Interconnection. One element of this program address the support and development of an integrated energy-water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning (the Eastern Interconnection is not participating in this element). Specific objectives include: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy-Water DSS through a strongly collaborative process between members of this proposal team and the Western Electricity Coordinating Council (WECC), Western Governors Association (WGA), the Electric Reliability Council of Texas (ERCOT) and their associated stakeholder teams. (3) Exercise the Energy-Water DSS to investigate water stress implications of the transmission planning scenarios put forward by WECC, WGA, and ERCOT. The goals of this project are: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy-Water

  14. Melting icebergs to produce fresh water and mechanical energy

    SciTech Connect

    Camirand, W.M.; Hautala, E.; Randall, J.M.

    1981-10-20

    Fresh water and mechanical energy are obtained from melting of icebergs. Warm surface seawater is contacted with a fluid, which is vaporized. The resulting vapor is used to generate mechanical energy and then is condensed by contacting it with cold melt water from the iceberg. The fluid is regenerated with a concomitant elevation in the temperature of the melt water. The warmer melt water is cycled to the body of the iceberg to facilitate its melting and produce additional cold melt water, which is apportioned as fresh water and water cycled to condense the aforesaid vapor. In an alternate embodiment of the invention warm seawater is evaporated at reduced pressure. Mechanical energy is generated from the vapor, which is then condensed by direct and intimate contact with cold melt water from the iceberg. The resultant fresh water is a mixture of condensed vapor and melt water from the iceberg and has a temperature greater than the cold melt water. This fresh water mixture is contacted with the body of the iceberg to further melt it; part of the cold melt water is separated as fresh water and the remainder is cycled for use in condensing the vapor from the warm surface seawater.

  15. Advanced Decentralized Water/Energy Network Design for Sustainable Infrastructure

    EPA Science Inventory

    In order to provide a water infrastructure that is more sustainable into and beyond the 21st century, drinking water distribution systems and wastewater collection systems must account for our diminishing water supply, increasing demands, climate change, energy cost and availabil...

  16. Nitrogen dioxide

    Integrated Risk Information System (IRIS)

    Nitrogen dioxide ; CASRN 10102 - 44 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogeni

  17. Chlorine dioxide

    Integrated Risk Information System (IRIS)

    Chlorine dioxide ; CASRN 10049 - 04 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogeni

  18. Thermochemical water decomposition. [hydrogen separation for energy applications

    NASA Technical Reports Server (NTRS)

    Funk, J. E.

    1977-01-01

    At present, nearly all of the hydrogen consumed in the world is produced by reacting hydrocarbons with water. As the supply of hydrocarbons diminishes, the problem of producing hydrogen from water alone will become increasingly important. Furthermore, producing hydrogen from water is a means of energy conversion by which thermal energy from a primary source, such as solar or nuclear fusion of fission, can be changed into an easily transportable and ecologically acceptable fuel. The attraction of thermochemical processes is that they offer the potential for converting thermal energy to hydrogen more efficiently than by water electrolysis. A thermochemical hydrogen-production process is one which requires only water as material input and mainly thermal energy, or heat, as an energy input. Attention is given to a definition of process thermal efficiency, the thermodynamics of the overall process, the single-stage process, the two-stage process, multistage processes, the work of separation and a process evaluation.

  19. Validation of doubly labeled water method for energy expenditure in postsurgical infants

    SciTech Connect

    Jones, P.J.H.; Winthrop, A.L.; Schoeller, D.A.; Swyer, P.R.; Filler, R.M.; Smith, J.M.; Heim, T.

    1986-03-05

    To validate the doubly labeled water method (/sup 2/H/sub 2/ /sup 18/O) in infants without concurrent water balance, carbon dioxide production rate (rCO/sub 2/) and energy expenditure (EE) were measured for 5 or 6 days by /sup 2/H/sub 2/ /sup 18/O and periodic open circuit respiratory gas exchange in 5 infants (mean age: 5.3 wk, range 1-14 wk). Following abdominal surgery (mean = 10.3 d, range 7-18 d), infants were maintained on constant oral or parenteral nutrition 4 d prior to and during the study. This avoided changes in baseline isotopic enrichment of body water diet induced changes in relative isotopic abundance of /sup 2/H and /sup 18/O could introduce significant errors in rCO/sub 2/. For /sup 2/H/sub 2/ /sub 1//sup 8/O, they assumed insensible water loss would be proportional to respiration volume and body surface area and hence rCO/sub 2/. This calculated insensible loss averaged 18% of water turnover. EE was calculated using measured respiratory quotients (m) and dietary intake (i) data. In 6 blinded studies with 5 infants, rCO/sub 2/ = 34.2 L/d (range 27.3-48.0), EE = 191 kcal/d (133-266) and EE/sub i/ = 197 kcal/d (138-281). Percent differences (+/- SD) from respiratory gas exchange were -1.1 +/- 5.8, -1.1 +/- 5.8, and 1.4 +/- 5.2, respectively. These findings demonstrate the validity of the doubly labeled water method for determining energy expenditure without concurrent water balance studies.

  20. Sulfur Dioxide Capture by Heterogeneous Oxidation on Hydroxylated Manganese Dioxide.

    PubMed

    Wu, Haodong; Cai, Weimin; Long, Mingce; Wang, Hairui; Wang, Zhiping; Chen, Chen; Hu, Xiaofang; Yu, Xiaojuan

    2016-06-01

    Here we demonstrate that sulfur dioxide (SO2) is efficiently captured via heterogeneous oxidation into sulfate on the surface of hydroxylated manganese dioxide (MnO2). Lab-scale activity tests in a fluidized bed reactor showed that the removal efficiency for a simulated flue gas containing 5000 mg·Nm(-3) SO2 could reach nearly 100% with a GHSV (gas hourly space velocity) of 10000 h(-1). The mechanism was investigated using a combination of experimental characterizations and theoretical calculations. It was found that formation of surface bound sulfate proceeds via association of SO2 with terminal hydroxyls. Both H2O and O2 are essential for the generation of reactive terminal hydroxyls, and the indirect role of O2 in heterogeneous SO2 oxidation at low temperature was also revealed. We propose that the high reactivity of terminal hydroxyls is attributed to the proper surface configuration of MnO2 to adsorb water with degenerate energies for associative and dissociative states, and maintain rapid proton dynamics. Viability analyses suggest that the desulfurization method that is based on such a direct oxidation reaction at the gas/solid interface represents a promising approach for SO2 capture. PMID:27123922

  1. Vibrational energy relaxation of water in Aerosol OT reverse micelle

    NASA Astrophysics Data System (ADS)

    Pang, Yoonsoo; Deak, John; Dlott, Dana

    2005-03-01

    An IR-Raman technique with mid-IR pump and anti-Stokes Raman probe is used to investigate reverse micelle mixture of Aerosol OT, water, and carbon tetrachloride, where polar water phase and nonpolar oil phase is separated by a monolayer of surfactant molecules. Anti-Stokes Raman scattering is only dependent on the population of vibrationally excited states, thus time-dependent population changes of parent/daughter vibrations can be monitored with this technique. Vibrational energy from nanodroplet of water is transferred to the surfactant head group in 1.8 ps and then out to solvent in 10 ps. Vibrational energy directly pumped into the surfactant tail group results in a slower 20-40 ps energy transfer to solvent. This energy transfer cannot be explained by ordinary heat transfer, but the specific vibrational energy relaxation pathway such as sulfonate stretch of surfactant molecules should be used. We can change the water-to-solvent energy transfer rate by adopting different size of reverse micelles or changing pump frequency over the broad OH stretch mode of water due to hydrogen bond network. Water molecules confined in nanometer scale reverse micelles have very different properties from bulk water and we have found many differences between the vibrational dynamics of water in these reverse micelles and those of bulk water.

  2. Design of an energy efficient solar powered water desalting plant

    SciTech Connect

    Nadler, M.

    1981-01-01

    A preliminary design was completed for a 6000 m/sup 3//day totally solar thermal energy powered seawater desalting plant. The objective was to design a process which would produce water at minimum cost using leading edge but commercial or near-commercial technology. Because the cost of solar energy is high, about half the cost of the plant is for solar equipment, minimum product water cost is achieved by minimizing energy consumption.

  3. Carbon Dioxide for pH Control

    SciTech Connect

    Wagonner, R.C.

    2001-08-16

    Cardox, the major supplier of carbon dioxide, has developed a diffuser to introduce carbon dioxide into a water volume as small bubbles to minimize reagent loss to the atmosphere. This unit is integral to several configurations suggested for treatment to control alkalinity in water streams.

  4. Modeling Water Resource Systems Accounting for Water-Related Energy Use, GHG Emissions and Water-Dependent Energy Generation in California

    NASA Astrophysics Data System (ADS)

    Escriva-Bou, A.; Lund, J. R.; Pulido-Velazquez, M.; Medellin-Azuara, J.

    2015-12-01

    Most individual processes relating water and energy interdependence have been assessed in many different ways over the last decade. It is time to step up and include the results of these studies in management by proportionating a tool for integrating these processes in decision-making to effectively understand the tradeoffs between water and energy from management options and scenarios. A simple but powerful decision support system (DSS) for water management is described that includes water-related energy use and GHG emissions not solely from the water operations, but also from final water end uses, including demands from cities, agriculture, environment and the energy sector. Because one of the main drivers of energy use and GHG emissions is water pumping from aquifers, the DSS combines a surface water management model with a simple groundwater model, accounting for their interrelationships. The model also explicitly includes economic data to optimize water use across sectors during shortages and calculate return flows from different uses. Capabilities of the DSS are demonstrated on a case study over California's intertied water system. Results show that urban end uses account for most GHG emissions of the entire water cycle, but large water conveyance produces significant peaks over the summer season. Also the development of more efficient water application on the agricultural sector has increased the total energy consumption and the net water use in the basins.

  5. Modeling Stochastic Energy and Water Consumption to Manage Residential Water Uses

    NASA Astrophysics Data System (ADS)

    Abdallah, A. M.; Rosenberg, D. E.; Water; Energy Conservation

    2011-12-01

    Water energy linkages have received growing attention from the water and energy utilities as utilities recognize that collaborative efforts can implement more effective conservation and efficiency improvement programs at lower cost with less effort. To date, limited energy-water household data has allowed only deterministic analysis for average, representative households and required coarse assumptions - like the water heater (the primary energy use in a home apart from heating and cooling) be a single end use. Here, we use recent available disaggregated hot and cold water household end-use data to estimate water and energy consumption for toilet, shower, faucet, dishwasher, laundry machine, leaks, and other household uses and savings from appliance retrofits. The disaggregated hot water and bulk water end-use data was previously collected by the USEPA for 96 single family households in Seattle WA and Oakland CA, and Tampa FL between the period from 2000 and 2003 for two weeks before and four weeks after each household was retrofitted with water efficient appliances. Using the disaggregated data, we developed a stochastic model that represents factors that influence water use for each appliance: behavioral (use frequency and duration), demographical (household size), and technological (use volume or flowrate). We also include stochastic factors that govern energy to heat hot water: hot water fraction (percentage of hot water volume to total water volume used in a certain end-use event), heater water intake and dispense temperatures, and energy source for the heater (gas, electric, etc). From the empirical household end-use data, we derive stochastic probability distributions for each water and energy factor where each distribution represents the range and likelihood of values that the factor may take. The uncertainty of the stochastic water and energy factors is propagated using Monte Carlo simulations to calculate the composite probability distribution for water

  6. Water Power for a Clean Energy Future (Fact Sheet)

    SciTech Connect

    Not Available

    2012-03-01

    This fact sheet provides an overview of the U.S. Department of Energy's Wind and Water Power Program's water power research activities. Water power is the nation's largest source of clean, domestic, renewable energy. Harnessing energy from rivers, manmade waterways, and oceans to generate electricity for the nation's homes and businesses can help secure America's energy future. Water power technologies fall into two broad categories: conventional hydropower and marine and hydrokinetic technologies. Conventional hydropower facilities include run-of-the-river, storage, and pumped storage. Most conventional hydropower plants use a diversion structure, such as a dam, to capture water's potential energy via a turbine for electricity generation. Marine and hydrokinetic technologies obtain energy from waves, tides, ocean currents, free-flowing rivers, streams and ocean thermal gradients to generate electricity. The United States has abundant water power resources, enough to meet a large portion of the nation's electricity demand. Conventional hydropower generated 257 million megawatt-hours (MWh) of electricity in 2010 and provides 6-7% of all electricity in the United States. According to preliminary estimates from the Electric Power Resource Institute (EPRI), the United States has additional water power resource potential of more than 85,000 megawatts (MW). This resource potential includes making efficiency upgrades to existing hydroelectric facilities, developing new low-impact facilities, and using abundant marine and hydrokinetic energy resources. EPRI research suggests that ocean wave and in-stream tidal energy production potential is equal to about 10% of present U.S. electricity consumption (about 400 terrawatt-hours per year). The greatest of these resources is wave energy, with the most potential in Hawaii, Alaska, and the Pacific Northwest. The Department of Energy's (DOE's) Water Power Program works with industry, universities, other federal agencies, and DOE

  7. Carbon dioxide enrichment: its direct effects and its interaction with water stress relative to apical dominance and growth of pea and tomato plants

    SciTech Connect

    Bermudez, A.P.

    1982-01-01

    A continued increase in atmospheric carbon dioxide could have a profound effect upon plant growth, resulting in a change in composition and structure of agricultural and native ecosystems. The objectives of this study using increased atmospheric CO/sub 2/ were: (1) to determine its effects on apical dominance; (2) to obtain information on changes in growth response for species and cultivars; (3) to investigate the interacting effect with water stress on plant growth and development. Alaska and Snow pea (Pisum sativum) and New Yorker and Better Boy tomato (Lycopersicum esculentum) plants, were grown from seeds under controlled environments in the Duke University Phytotron. The results produced by CO/sub 2/ enrichment were: (1) Apical dominance was not altered. (2) Seedling emergence was unaffected. However, the growth response in terms of plant height, leaf thickness, dry matter production and flowering varied with the species and the cultivars within species and was inconsistent for determinate and indeterminate cultivars. (3) The water status was usually not affected by the CO/sub 2/ level when the plants were well-watered. These results are of ecological significance. They indicated that as atmospheric CO/sub 2/ increases, there will be improved water use efficiency, and also, changes in canopy shape may occur in crop stands and native ecosystems. This would be due to response differences of species, varieties and cultivars.

  8. Genetic manipulation of stomatal density influences stomatal size, plant growth and tolerance to restricted water supply across a growth carbon dioxide gradient

    PubMed Central

    Doheny-Adams, Timothy; Hunt, Lee; Franks, Peter J.; Beerling, David J.; Gray, Julie E.

    2012-01-01

    To investigate the impact of manipulating stomatal density, a collection of Arabidopsis epidermal patterning factor (EPF) mutants with an approximately 16-fold range of stomatal densities (approx. 20–325% of that of control plants) were grown at three atmospheric carbon dioxide (CO2) concentrations (200, 450 and 1000 ppm), and 30 per cent or 70 per cent soil water content. A strong negative correlation between stomatal size (S) and stomatal density (D) was observed, suggesting that factors that control D also affect S. Under some but not all conditions, mutant plants exhibited abnormal stomatal density responses to CO2 concentration, suggesting that the EPF signalling pathway may play a role in the environmental adjustment of D. In response to reduced water availability, maximal stomatal conductance was adjusted through reductions in S, rather than D. Plant size negatively correlated with D. For example, at 450 ppm CO2 EPF2-overexpressing plants, with reduced D, had larger leaves and increased dry weight in comparison with controls. The growth of these plants was also less adversely affected by reduced water availability than plants with higher D, indicating that plants with low D may be well suited to growth under predicted future atmospheric CO2 environments and/or water-scarce environments. PMID:22232766

  9. An analysis of a low-energy, low-water use community in Mexico City

    NASA Astrophysics Data System (ADS)

    Bermudez Alcocer, Jose Luis

    apartments and a 22 percent reduction for the store. In addition, for water cost there was a 70 percent reduction for apartments and a 16 percent reduction for the store. Overall, a 64 total percent reduction in carbon dioxide (CO2) was accomplished by saving energy-use in the apartments, the grocery store and transportation. Finally, a guide has been created for Mexico City to establish strategies and actions based on the results of this work in order to reduce overall energy and water-use in Mexico City. The guide is expected to be useful in the short term in Mexico City, and could be potentially adopted in the long term in other countries in the same manner as which Brazil and Colombia adopted the Mexican CONAVI's 2010 Housing Building Code.

  10. Entrapment of carbon dioxide with chitosan-based core-shell particles containing changeable cores.

    PubMed

    Dong, Yanrui; Fu, Yinghao; Lin, Xia; Xiao, Congming

    2016-08-01

    Water-soluble chitosan-based core-shell particles that contained changeable cores were successfully applied to anchor carbon dioxide. The entrapment capacity of the particles for carbon dioxide (EC) depended on the cores. It was found that EC of the particles contained aqueous cores was higher than that of the beads with water-soluble chitosan gel cores, which was confirmed with thermogravimetric analysis. In addition, calcium ions and sodium hydroxide were introduced within the particles to examine their effect on the entrapment. EC of the particles was enhanced with sodium hydroxide when the cores were WSC gel. The incorporation of calcium ions was helpful for stabilizing carbon dioxide through the formation of calcium carbonate, which was verified with Fourier transform infrared spectra and scanning electron microscopy/energy-dispersive spectrometry. This phenomenon meant the role of calcium ions for fixating carbon dioxide was significant. PMID:27174910

  11. The formation of acid rain in the atmosphere, adjacent to the TTP with the joint-condensing of sulfur dioxide and water vapor

    NASA Astrophysics Data System (ADS)

    Gvozdyakov, D. V.; Gubin, V. E.; Matveeva, A. A.

    2014-08-01

    Presents the results of mathematical simulation of the condensation process of sulphur dioxide and water vapor on the condensation nuclei surface under the action of natural factors. Numerical investigations were carried out for the summer at a moderate speed of the wind. The influence of the parameter of condensation on the speed of the process of sulfuric acid drops formation in the air space was analyzed. Time ranges, sufficient for the formation of the acid rain sedimentation in the atmosphere, adjacent to the areas of thermal power station work were established. It is shown that the speed of air masses movement effects on the process of acid anthropogenic admixtures dispersion in the atmosphere. Approbation of the obtained results was carried out by checking the difference scheme conservative and solution of test problems.

  12. Roles of temperature and flow velocity on the mobility of nano-sized titanium dioxide in natural waters.

    PubMed

    Lv, Xiaohui; Tao, Jing; Chen, Baiyang; Zhu, Xiaoshan

    2016-09-15

    While environmental fate and transport of nano-sized TiO2 (nTiO2) attracts intensive attention, how physical characters of natural waters, such as water type, temperature, and flowing velocity, impact the mobility of nTiO2 remain unclear now. In this work, ultrapure water, lake water, and sea water were chosen to investigate the aggregation and sedimentation behaviors of nTiO2 under a series of environmental conditions with varying feeding concentration, water temperature, and flow velocity. In general, the results demonstrated poorer stability of nTiO2 in sea water than other water types. After a 7-hour test (initial nTiO2=100mg/L), the nTiO2 hydrodynamic sizes, sedimentation rates, and zeta potentials differed significantly in ultrapure water (545nm, 24%, -30mV), lake water (1374nm, 56%, -16mV) and sea water (2152nm, 87%, -3mV). Meanwhile, the study exhibited significant influences of initial nTiO2 concentration (10-100mg/L) on the behaviors of nTiO2 in sea water and lake water but negligible impact on ultrapure water. Ambient temperature also directly affected the aggregation and sedimentation rates of nTiO2, both hydrodynamic diameters and sedimentation of nTiO2 increased markedly with the rising ambient temperatures (10-60°C). In contrast, increasing water flow velocity (0-0.32m/s) lowered the hydrodynamic diameters and sedimentation rates of nTiO2, although the influence of flowing velocity on the aggregation of nTiO2 was partially reversible. PMID:26970667

  13. Making Sustainable Energy Choices: Insights on the Energy/Water/Land Nexus

    SciTech Connect

    Not Available

    2014-10-01

    This periodic publication summarizes insights from the body of NREL analysis work. In this issue of Analysis Insights, we examine the implications of our energy choices on water, land use, climate, developmental goals, and other factors. Collectively, NREL's work helps policymakers and investors understand and evaluate energy choices within the complex web of connections, or nexus, between energy, water, and land.

  14. Sustainable Rural Energy: Traditional Water Wheels in Padang (PWW) Indonesia

    NASA Astrophysics Data System (ADS)

    Ibrahim, Gusri Akhyar; Haron, Che Hassan Che; Azhari, Che Husna

    2010-06-01

    Renewable and sustainable energy is increasingly gaining interest in current research circles due to the debates on renewable energy resources. It is essential for scientists and researchers to search for solutions in renewable energy resources, with effective technologies, and low cost in operation and maintenance. Hydro resources can be considered a potential renewable energy resource. The traditional water wheel with simple construction coupled with a basic concept of technology can be utilised as a renewable and sustainable rural energy system. This paper discusses the case of the water wheel as a renewable energy system employed in Padang, Indonesia. The Padang water wheel is constructed from hardwood material with a diameter of 300 cm and width of 40 cm. It is built on a river using water flow to generate the movement of the wheel. The water wheel application in the area showed that it is suitable to be utilised to elevate and distribute water to rice fields located at a higher level than the water level of the river. The water wheel capacity is about 100-120 liters/min. It could continuously irrigate ±5 ha. of the rice fields. One of the advantages of this water wheel type is to function as a green technology concept promising no negative effect on the environment. The traditional water wheel has also a big economic impact on the rural economy, increasing the productivity of the rice fields. The people of Padang live in a water landscape encompassing the water wheel as an ubiquitous part of their lives, hence they relate to it and the technology of fabrication as well as the utilisation, making it an amenable and effective technology, finding relevance in the modern world.

  15. 78 FR 2340 - Energy Conservation Program: Test Procedures for Residential Water Heaters and Commercial Water...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-11

    ... definition of a ``water heater'' and are, therefore, not covered equipment under EPCA. 75 FR 20112, 20126 and...-prescribed energy conservation standards for residential water heaters. 66 FR 4474. Compliance with the... conservation standards for residential water heaters for a second time. 75 FR 20112. Compliance with...

  16. Chilled water storage system reduces energy costs

    SciTech Connect

    Fiorino, D.P. )

    1993-04-01

    This article describes the conversion of an industrial central chiller plant from conventional live-load operation to full-shift thermal energy storage. The topics of the article include project design, project implementation, interactive pressure/temperature control, energy efficiency, operations and maintenance and cost effectiveness.

  17. Using Solar Energy to Desalinate Water.

    ERIC Educational Resources Information Center

    Tabor, Harry Z.

    1978-01-01

    Material presented is adapted from Desalination with Solar Energy, a paper presented before the International Symposium on Energy Sources and Development, held in Spain in 1977. Desalination systems energized by the sun, conditions governing their efficiency, and their costs are discussed. (HM)

  18. Effects of carbon dioxide, Nd:YAG and carbon dioxide-Nd:YAG combination lasers at high energy densities on synthetic hydroxyaptite.

    PubMed

    Meurman, J H; Voegel, J C; Rauhamaa-Mäkinen, R; Gasser, P; Thomann, J M; Hemmerle, J; Luomanen, M; Paunio, I; Frank, R M

    1992-01-01

    The aim of this study was to determine the crystalline structure and chemical alterations of synthetic hydroxyapatite after irradiation with either CO2, Nd:YAG or CO2-Nd:YAG combination lasers at high energy densities of 500-3,230 J.cm2. Further, dissolution kinetics of the lased material were analysed and compared with those of unlased apatite. Electron microscopy showed that the lased material consisted of two kinds of crystals. From the micrographs their diameters varied from 600 to 1,200 A and from 3,000 to 6,000 A, respectively. The larger crystals showed 6.9-Angström periodic lattice fringes in the transmission electron microscope. alpha-Tricalcium phosphate (TCP) was identified by X-ray diffraction. Selective-area electron diffraction identified the large crystals to consist of tricalcium phosphate while the smaller crystals were probably hydroxyapatite. Assays of dissolution kinetics showed that at these high energy densities lased material dissolved more rapidly than unlased synthetic hydroxyapatite due to the higher solubility of TCP. PMID:1325875

  19. Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis.

    PubMed

    Chen, Y X; Lavacchi, A; Miller, H A; Bevilacqua, M; Filippi, J; Innocenti, M; Marchionni, A; Oberhauser, W; Wang, L; Vizza, F

    2014-01-01

    The energetic convenience of electrolytic water splitting is limited by thermodynamics. Consequently, significant levels of hydrogen production can only be obtained with an electrical energy consumption exceeding 45 kWh kg(-1)H2. Electrochemical reforming allows the overcoming of such thermodynamic limitations by replacing oxygen evolution with the oxidation of biomass-derived alcohols. Here we show that the use of an original anode material consisting of palladium nanoparticles deposited on to a three-dimensional architecture of titania nanotubes allows electrical energy savings up to 26.5 kWh kg(-1)H2 as compared with proton electrolyte membrane water electrolysis. A net energy analysis shows that for bio-ethanol with energy return of the invested energy larger than 5.1 (for example, cellulose), the electrochemical reforming energy balance is advantageous over proton electrolyte membrane water electrolysis. PMID:24892771

  20. Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis

    NASA Astrophysics Data System (ADS)

    Chen, Y. X.; Lavacchi, A.; Miller, H. A.; Bevilacqua, M.; Filippi, J.; Innocenti, M.; Marchionni, A.; Oberhauser, W.; Wang, L.; Vizza, F.

    2014-06-01

    The energetic convenience of electrolytic water splitting is limited by thermodynamics. Consequently, significant levels of hydrogen production can only be obtained with an electrical energy consumption exceeding 45 kWh kg-1H2. Electrochemical reforming allows the overcoming of such thermodynamic limitations by replacing oxygen evolution with the oxidation of biomass-derived alcohols. Here we show that the use of an original anode material consisting of palladium nanoparticles deposited on to a three-dimensional architecture of titania nanotubes allows electrical energy savings up to 26.5 kWh kg-1H2 as compared with proton electrolyte membrane water electrolysis. A net energy analysis shows that for bio-ethanol with energy return of the invested energy larger than 5.1 (for example, cellulose), the electrochemical reforming energy balance is advantageous over proton electrolyte membrane water electrolysis.