Science.gov

Sample records for eesti lipu ajalugu

  1. Effects of Low-Intensity Pulsed Ultrasound on Dental Implant Osseointegration: A Preliminary Report

    PubMed Central

    Ustun, Yakup; Erdogan, Ozgur; Kurkcu, Mehmet; Akova, Tolga; Damlar, İbrahim

    2008-01-01

    Objectives The aim of this pilot study was to evaluate the effects of low intensity pulsed ultrasound (LIPU) on dental implant osseointegration in a rabbit model using mechanical-histomorphometric methods and resonance-frequency analysis (RFA). Methods Twelve skeletally mature, male New Zealand rabbits (3.4 kg±0.5) were included in the study. A total number of 24 implants were placed bilaterally into the tibiae of the subjects. The right tibia of each rabbit received LIPU application (20 min/day) while the left side received sham treatment. The study was carried on for six weeks and the rabbits were sacrificed in 7 days intervals (two rabbits for each week). The rabbits were categorized in the early or late osseointegration period according to their sacrification date. Comparisons between the groups were made using statistical analysis of histomorphometric analysis, resonance frequency analysis and mechanical tests. Results The histomorphometry parameters showed that the bone area and the bone volume values have significantly increased in the early osseointegration period and the bone-implant contact values have significantly increased in the late osseointegration period in the LIPU treated subjects when compared to the control group. RFA scores had mild increase in the LIPU group. However the difference was not statistically significant. Mechanical test results suggest an increased mechanical stability in the LIPU group as well. Conclusions Results of this pilot study indicate that low intensity pulsed ultrasound may have positive effects on osseointegration and stability of dental implants. PMID:19212531

  2. Machine Learning Methods for Binary and Multiclass Classification of Melanoma Thickness From Dermoscopic Images.

    PubMed

    Saez, Aurora; Sanchez-Monedero, Javier; Gutierrez, Pedro Antonio; Hervas-Martinez, Cesar

    2016-04-01

    Thickness of the melanoma is the most important factor associated with survival in patients with melanoma. It is most commonly reported as a measurement of depth given in millimeters (mm) and computed by means of pathological examination after a biopsy of the suspected lesion. In order to avoid the use of an invasive method in the estimation of the thickness of melanoma before surgery, we propose a computational image analysis system from dermoscopic images. The proposed feature extraction is based on the clinical findings that correlate certain characteristics present in dermoscopic images and tumor depth. Two supervised classification schemes are proposed: a binary classification in which melanomas are classified into thin or thick, and a three-class scheme (thin, intermediate, and thick). The performance of several nominal classification methods, including a recent interpretable method combining logistic regression with artificial neural networks (Logistic regression using Initial variables and Product Units, LIPU), is compared. For the three-class problem, a set of ordinal classification methods (considering ordering relation between the three classes) is included. For the binary case, LIPU outperforms all the other methods with an accuracy of 77.6%, while, for the second scheme, although LIPU reports the highest overall accuracy, the ordinal classification methods achieve a better balance between the performances of all classes. PMID:26672031

  3. The Estonian Deaf Community

    ERIC Educational Resources Information Center

    Hein, Kadri

    2010-01-01

    Interest in research on Estonian Sign Language, or eesti viipekeel (EVK), has been increasing. Studies have been conducted on different aspects of EVK, such as ways of expressing time (Trukmann 2006) and color terms (Hollman and Sutrop 2007, Hollman 2008). Moreover, EVK has lately received more attention in legislation. The language obtained an…

  4. Quasi-conformal mapping with genetic algorithms applied to coordinate transformations

    NASA Astrophysics Data System (ADS)

    González-Matesanz, F. J.; Malpica, J. A.

    2006-11-01

    In this paper, piecewise conformal mapping for the transformation of geodetic coordinates is studied. An algorithm, which is an improved version of a previous algorithm published by Lippus [2004a. On some properties of piecewise conformal mappings. Eesti NSV Teaduste Akademmia Toimetised Füüsika-Matemaakika 53, 92-98; 2004b. Transformation of coordinates using piecewise conformal mapping. Journal of Geodesy 78 (1-2), 40] is presented; the improvement comes from using a genetic algorithm to partition the complex plane into convex polygons, whereas the original one did so manually. As a case study, the method is applied to the transformation of the Spanish datum ED50 and ETRS89, and both its advantages and disadvantages are discussed herein.

  5. Mitigation analysis for Estonia

    SciTech Connect

    Martins, A.; Roos, J.; Pesur, A.

    1996-09-01

    The present report provides data on the mitigation analysis of Estonia. The results for energy, forest and agricultural sectors and macro-economic analysis are given. The Government of Estonia has identified the development of energy production as the main strategical means in the movement towards market economy. Now 99% of electricity generation and about 25% of heat production in Estonia is based on oil shale combustion. To increase the efficiency of oil shale-fired power plants and decrease CO{sub 2} emissions, the State Enterprise (SE) Eesti Energia (Estonian Energy) is planning to reconstruct these power plants and introduce the Circulating Fluidized Bed (CFB) combustion technology for oil shale burning to replace the Pulverized Combustion (PC). According to the Estonian Forest Policy, two general objectives are of importance: sustainability in forestry and efficiency in forest management. For the reduction of greenhouse gases (GHG) emissions from agriculture, it is necessary to increase the efficiency of production resource usage. The growth of the GDP in 1995 was 2.9% as a result of large-scale privatization activities in Estonia and re-introduction of the available, but unused production capacities with the help of foreign and domestic investments. It is assumed that the medium growth rate of GDP reaches 6% in 1998.

  6. Assessment of combustion of oil shale refinery by-products in a TP-101 boiler

    NASA Astrophysics Data System (ADS)

    Sidorkin, V. T.; Tugov, A. N.; Vereshchetin, V. A.; Mel'nikov, D. A.

    2015-04-01

    The most cost-efficient method for utilization of the oil shale refinery by-products, viz., the retort gas and the shale gasoline, for power generation is combustion of these products in power-generating oil shale-fired boilers. Calculation studies carried out at the Estonian electric power plant in Narva, an enterprise of EESTI ENERGIA, have shown that recycling of the flue gases in the furnace of a TP-101 boiler enables an increase in the portion of the oil shale refinery by-products burned in the boiler from the current 7% to 40%. Recycling of the flue gases is aimed at maintaining the temperatures in the furnace at a level characteristic of combustion of oil shale and reducing the nitric oxide concentration in the retort gas burners' flame. The degree of the flue gas recycling depends on the percentage of the burnt oil shale refinery by-products in the total heat generation and increases with the increasing percentage. For the threshold value of 40% under the rated conditions, the flue gas recycling accounts for 10%. A complete changeover of the boiler to combustion of only the retort gas in place of the oil shale does not seem to be possible, since this will necessitate major modification to the TP-101 boiler heating surfaces. Considering the obtained results, as a pilot project, one boiler furnace was modified by installing six retort gas burners and a flue gas recycling system.

  7. Proposed stratotype for the base of the highest Cambrian stage at the first appearance datum of Cordylodus andresi, Lawson Cove section, Utah, USA

    USGS Publications Warehouse

    Miller, J.F.; Ethington, Raymond L.; Evans, K.R.; Holmer, L.E.; Loch, James D.; Popov, L.E.; Repetski, J.E.; Ripperdan, R.L.; Taylor, John F.

    2006-01-01

    We propose a candidate for the Global Standard Stratotype-section and Point (GSSP) for the base of the highest stage of the Furongian Series of the Cambrian System. The section is at Lawson Cove in the Ibex area of Millard County, Utah, USA. The marker horizon is the first appearance datum (FAD) of the conodont Cordylodus andresi Viira et Sergeyeva in Kaljo et al. [Kaljo, D., Borovko, N., Heinsalu, H., Khazanovich, K., Mens, K., Popov, L., Sergeyeva, S., Sobolevskaya, R., Viira, V., 1986. The Cambrian-Ordovician boundary in the Baltic-Ladoga clint area (North Estonia and Leningrad Region, USSR). Eesti NSV Teaduste Akadeemia Toimetised. Geologia 35, 97-108]. At this section and elsewhere this horizon also is the FAD of the trilobite Eurekia apopsis (Winston et Nicholls, 1967). This conodont characterizes the base of the Cordylodus proavus Zone, which has been recognized in many parts of the world. This trilobite characterizes the base of the Eurekia apopsis Zone, which has been recognized in many parts of North America. The proposed boundary is 46.7 m above the base of the Lava Dam Member of the Notch Peak Formation at the Lawson Cove section. Brachiopods, sequence stratigraphy, and carbon-isotope geochemistry are other tools that characterize this horizon and allow it to be recognized in other areas. ?? 2006 Nanjing Institute of Geology and Palaeontology, CAS.

  8. Environmental hazard of oil shale combustion fly ash.

    PubMed

    Blinova, Irina; Bityukova, Liidia; Kasemets, Kaja; Ivask, Angela; Käkinen, Aleksandr; Kurvet, Imbi; Bondarenko, Olesja; Kanarbik, Liina; Sihtmäe, Mariliis; Aruoja, Villem; Schvede, Hedi; Kahru, Anne

    2012-08-30

    The combined chemical and ecotoxicological characterization of oil shale combustion fly ash was performed. Ash was sampled from the most distant point of the ash-separation systems of the Balti and Eesti Thermal Power Plants in North-Eastern Estonia. The fly ash proved potentially hazardous for tested aquatic organisms and high alkalinity of the leachates (pH>10) is apparently the key factor determining its toxicity. The leachates were not genotoxic in the Ames assay. Also, the analysis showed that despite long-term intensive oil-shale combustion accompanied by considerable fly ash emissions has not led to significant soil contamination by hazardous trace elements in North-Eastern Estonia. Comparative study of the fly ash originating from the 'new' circulating fluidized bed (CFB) combustion technology and the 'old' pulverized-fired (PF) one showed that CFB fly ash was less toxic than PF fly ash. Thus, complete transfer to the 'new' technology will reduce (i) atmospheric emission of hazardous trace elements and (ii) fly ash toxicity to aquatic organisms as compared with the 'old' technology. PMID:22717068

  9. Efficiency Assessment of Support Mechanisms for Wood-Fired Cogeneration Development in Estonia

    NASA Astrophysics Data System (ADS)

    Volkova, Anna; Siirde, Andres

    2010-01-01

    There are various support mechanisms for wood-fired cogeneration plants, which include both support for cogeneration development and stimulation for increasing consumption of renewable energy sources. The efficiency of these mechanisms is analysed in the paper. Overview of cogeneration development in Estonia is given with the focus on wood-fired cogeneration. Legislation acts and amendments, related to cogeneration support schemes, were described. For evaluating the efficiency of support mechanisms an indicator - fuel cost factor was defined. This indicator includes the costs related to the chosen fuel influence on the final electricity generation costs without any support mechanisms. The wood fuel cost factors were compared with the fuel cost factors for peat and oil shale. For calculating the fuel cost factors, various data sources were used. The fuel prices data were based on the average cost of fuels in Estonia for the period from 2000 till 2008. The data about operating and maintenance costs, related to the fuel type in the case of comparing wood fuel and oil shale fuel were taken from the CHP Balti and Eesti reports. The data about operating and maintenance costs used for peat and wood fuel comparison were taken from the Tallinn Elektrijaam reports. As a result, the diagrams were built for comparing wood and its competitive fuels. The decision boundary lines were constructed on the diagram for the situation, when no support was provided for wood fuels and for the situations, when various support mechanisms were provided during the last 12 years.

  10. The enrichment of natural radionuclides in oil shale-fired power plants in Estonia--the impact of new circulating fluidized bed technology.

    PubMed

    Vaasma, Taavi; Kiisk, Madis; Meriste, Tõnis; Tkaczyk, Alan Henry

    2014-03-01

    Burning oil shale to produce electricity has a dominant position in Estonia's energy sector. Around 90% of the overall electric energy production originates from the Narva Power Plants. The technology in use has been significantly renovated - two older types of pulverized fuel burning (PF) energy production units were replaced with new circulating fluidized bed (CFB) technology. Additional filter systems have been added to PF boilers to reduce emissions. Oil shale contains various amounts of natural radionuclides. These radionuclides concentrate and become enriched in different boiler ash fractions. More volatile isotopes will be partially emitted to the atmosphere via flue gases and fly ash. To our knowledge, there has been no previous study for CFB boiler systems on natural radionuclide enrichment and their atmospheric emissions. Ash samples were collected from Eesti Power Plant's CFB boiler. These samples were processed and analyzed with gamma spectrometry. Activity concentrations (Bq/kg) and enrichment factors were calculated for the (238)U ((238)U, (226)Ra, (210)Pb) and (232)Th ((232)Th, (228)Ra) family radionuclides and for (40)K in different CFB boiler ash fractions. Results from the CFB boiler ash sample analysis showed an increase in the activity concentrations and enrichment factors (up to 4.5) from the furnace toward the electrostatic precipitator block. The volatile radionuclide ((210)Pb and (40)K) activity concentrations in CFB boilers were evenly distributed in finer ash fractions. Activity balance calculations showed discrepancies between input (via oil shale) and output (via ash fractions) activities for some radionuclides ((238)U, (226)Ra, (210)Pb). This refers to a situation where the missing part of the activity (around 20% for these radionuclides) is emitted to the atmosphere. Also different behavior patterns were detected for the two Ra isotopes, (226)Ra and (228)Ra. A part of (226)Ra input activity, unlike (228)Ra, was undetectable in the

  11. Enterotoxigenic Escherichia coli Subclinical Infection in Pigs: Bacteriological and Genotypic Characterization and Antimicrobial Resistance Profiles.

    PubMed

    Moredo, Fabiana A; Piñeyro, Pablo E; Márquez, Gabriela C; Sanz, Marcelo; Colello, Rocío; Etcheverría, Analía; Padola, Nora L; Quiroga, María A; Perfumo, Carlos J; Galli, Lucía; Leotta, Gerardo A

    2015-08-01

    Enterotoxigenic Escherichia coli (ETEC) is the major pathogen responsible for neonatal diarrhea, postweaning diarrhea, and edema disease in pigs. Although it can be harmless, ETEC is also present in the intestines of other animal species and humans, causing occasional diarrhea outbreaks. The evaluation of this pathogen's presence in food sources is becoming an increasingly important issue in human health. In order to determine the prevalence of ETEC in nondiarrheic pigs, 990 animals from 11 pig farms were sampled. Using end-time polymerase chain reaction (PCR), eltA, estI genes, or both, were detected in 150 (15.2%) animals. From the positive samples, 40 (26.6%) ETEC strains were isolated, showing 19 antibiotic-resistance patterns; 52.5% of these strains had multiple antibiotic resistances, and 17.5% carried the intI2 gene. The most prevalent genotypes were rfb(O157)/estII/aidA (32.5%) and estI/estII (25.0%). The estII gene was identified most frequently (97.5%), followed by estI (37.5%), astA (20.0%), and eltA (12.5%). The genes coding the fimbriae F5, F6, and F18 were detected in three single isolates. The aidA gene was detected in 20 ETEC strains associated with the estII gene. Among the isolated ETEC strains, stx(2e)/estI, stx(2e)/estI/estII, and stx(2e)/estI/estII/intI2 genotypes were identified. The ETEC belonged to 12 different serogroups; 37.5% of them belonged to serotype O157:H19. Isolates were grouped by enterobacterial repetitive intergenic consensus-PCR into 5 clusters with 100.0% similarity. In this study, we demonstrated that numerous ETEC genotypes cohabit and circulate in swine populations without clinical manifestation of neonatal diarrhea, postweaning diarrhea, or edema disease in different production stages. The information generated is important not only for diagnostic and epidemiological purposes, but also for understanding the dynamics and ecology of ETEC in pigs in different production stages that can be potentially transmitted to humans

  12. Dating Kaali Crater (Estonia) based on charcoal emplaced within proximal ejecta blanket

    NASA Astrophysics Data System (ADS)

    Losiak, Anna; Wild, Eva Maria; Huber, Matthew S.; Wisniowski, Tomasz; Paavel, Kristiina; Jõeleht, Argo; Välja, Rudolf; Plado, Jüri; Kriiska, Aivar; Wilk, Jakob; Zanetti, Michael; Geppert, Wolf D.; Kulkov, Alexander; Steier, Peter; Pirkovic, Irena

    2015-04-01

    within the trench (located ~12 meters to the SW from the rim crest of the main crater) and at different depths in respect to the ejecta-till boundary were processed separately. 14C dating was per-formed at the Vienna Environmental Research Accelerator at the University of Vienna (Austria). The calibrated (95,4% probability) time ranges of eight out of ten samples span the time interval from ~1650 BC to ~1400 BC. This age is based on dating charcoal within the ejecta blanket which makes it directly linked with the impact structure, and not susceptible to potential reservoir effects. References: Aaloe et al. 1963. Eesti Loodus 6:262-265. Moora et al. 2012. Geochronometria 39: 262-267. Raukas et al. 1995. Proc. Estonian Acad. Sci., Geology 44:177-183. Rasmussen et al. 2000. MAPS 35:1067-1071. Saarse et al. 1991. Bull. Geol. Soc. Finland 63:129-139. Veski et al. 2007. Comet/Asteroid Impacts and Hu-man Society:265-275. Veski et al. 2001. MAPS 36:1367-1376. Veski et al. 2004. Veg Hist Archaeobot 13:197-206. Zanetti et al. 2015. 46th LPSC.