Science.gov

Sample records for ethers aralkyl ethers

  1. Pentabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Pentabromodiphenyl ether ; CASRN 32534 - 81 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  2. Hexabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Hexabromodiphenyl ether ; CASRN 36483 - 60 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  3. Ethyl ether

    Integrated Risk Information System (IRIS)

    Ethyl ether ; CASRN 60 - 29 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effect

  4. Tetrabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Tetrabromodiphenyl ether ; CASRN 40088 - 47 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncar

  5. Nonabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Nonabromodiphenyl ether ; CASRN 63936 - 56 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  6. Tribromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Tribromodiphenyl ether ; CASRN 49690 - 94 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarci

  7. Octabromodiphenyl ether

    Integrated Risk Information System (IRIS)

    Octabromodiphenyl ether ; CASRN 32536 - 52 - 0 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  8. Poly(arylene ether)s containing pendent ethynyl groups

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Jensen, Brian J. (Inventor)

    1996-01-01

    Poly(arylene ether)s containing pendent ethynyl and substituted ethynyl groups and poly(arylene ether) copolymers containing pendent ethynyl and substituted ethynyl groups are readily prepared from bisphenols containing ethynyl and substituted ethynyl groups. The resulting polymers are cured up to 350.degree. C. to provide crosslinked poly(arylene ether)s with good solvent resistance, high strength and modulus.

  9. Crown ethers in graphene

    SciTech Connect

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-13

    Crown ethers, introduced by Pedersen1, are at their most basic level neutral rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted special attention for their ability to selectively incorporate various atoms2 or molecules within the cavity formed by the ring3-6. This property has led to the use of crown ethers and their compounds in a wide range of chemical and biological applications7,8. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity9,10. In this Letter, we report atomic-resolution images of the same basic structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar and thus uniquely suited for the many applications that crown ethers are known for. First-principles calculations show that the close similarity of the structures seen in graphene with those of crown ether molecules also extends to their selectivity towards specific metal cations depending on the ring size. Atoms (or molecules) incorporated within the crown ethers in graphene offer a simple environment that can be easily and systematically probed and modeled. Thus, we expect that this discovery will introduce a new wave of investigations and applications of chemically functionalized graphene.

  10. Crown ethers in graphene

    DOE PAGESBeta

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-13

    Crown ethers, introduced by Pedersen1, are at their most basic level neutral rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted special attention for their ability to selectively incorporate various atoms2 or molecules within the cavity formed by the ring3-6. This property has led to the use of crown ethers and their compounds in a wide range of chemical and biological applications7,8. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity9,10. In this Letter, we report atomic-resolution images of the same basicmore » structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar and thus uniquely suited for the many applications that crown ethers are known for. First-principles calculations show that the close similarity of the structures seen in graphene with those of crown ether molecules also extends to their selectivity towards specific metal cations depending on the ring size. Atoms (or molecules) incorporated within the crown ethers in graphene offer a simple environment that can be easily and systematically probed and modeled. Thus, we expect that this discovery will introduce a new wave of investigations and applications of chemically functionalized graphene.« less

  11. Crown ethers in graphene

    NASA Astrophysics Data System (ADS)

    Guo, Junjie; Lee, Jaekwang; Contescu, Cristian I.; Gallego, Nidia C.; Pantelides, Sokrates T.; Pennycook, Stephen J.; Moyer, Bruce A.; Chisholm, Matthew F.

    2014-11-01

    Crown ethers are at their most basic level rings constructed of oxygen atoms linked by two- or three-carbon chains. They have attracted attention for their ability to selectively incorporate various atoms or molecules within the cavity formed by the ring. However, crown ethers are typically highly flexible, frustrating efforts to rigidify them for many uses that demand higher binding affinity and selectivity. Here we present atomic-resolution images of the same basic structures of the original crown ethers embedded in graphene. This arrangement constrains the crown ethers to be rigid and planar. First-principles calculations show that the close similarity of the structures should also extend to their selectivity towards specific metal cations. Crown ethers in graphene offer a simple environment that can be systematically tested and modelled. Thus, we expect that our finding will introduce a new wave of investigations and applications of chemically functionalized graphene.

  12. INTRAVENOUS ETHER ANESTHESIA

    PubMed Central

    Eger, Edmond I.; Johnson, Edward A.

    1963-01-01

    From a study of intravenous ether anesthesia, it was concluded that ether diluted to a 5 per cent solution in 5 per cent dextrose and water may be used to induce and maintain a smooth and easily controlled anesthetic state similar to that obtained with inhalation ether but without the dependence of the latter technique on ventilation. Cough and laryngospasm were absent. Adequate spontaneous respiration can be maintained with this technique. The technique is particularly useful in endoscopy during which the airway is often not available for anesthetic administration. PMID:14051486

  13. Vinyl ether silicones

    SciTech Connect

    Herzig, C.; Dauth, J.; Deubzer, B.; Weis, J.

    1995-12-01

    Siloxanes with vinyl ether groups are prepared by hydrosilylation reaction of dihydrosiloxanes with divinyl ethers in excess. Different stoichiometry, produces linear copolymers of different viscosities and double bond concentrations always with an active vinyl ether group at each chain end. Polymerisations triggered by UV light were done with mixtures of these compounds and a series of onium salts. Very fast cure is observed even with low doses at 290 nm. V.E. silicones are found to cure essentially quantitative. The comparison with other highly reactive cationic monomers revealed that compounds are among the fastest curing prepolymers in cationic chemistry.

  14. Genotoxicity of glycol ethers.

    PubMed Central

    McGregor, D B

    1984-01-01

    The genetic toxicology of glycol ethers is reviewed. Ethylene glycol monomethyl ether (EGME) and diglyme have been more extensively studied than other members of this series. Most results indicate a lack of genotoxic potential, but certain tests have yielded positive responses with certain compounds. Ethylene glycol monoethyl ether (EGEE) induced sister chromatid exchanges and chromosomal aberrations in cultured cells. Both EGME and diglyme induced mouse sperm head morphological changes, male rat weak dominant lethal mutations and marked, but reversible, loss of male rat fertility. PMID:6541999

  15. Catalytic oxidation of dimethyl ether

    DOEpatents

    Zelenay, Piotr; Wu, Gang; Johnston, Christina M.; Li, Qing

    2016-05-10

    A composition for oxidizing dimethyl ether includes an alloy supported on carbon, the alloy being of platinum, ruthenium, and palladium. A process for oxidizing dimethyl ether involves exposing dimethyl ether to a carbon-supported alloy of platinum, ruthenium, and palladium under conditions sufficient to electrochemically oxidize the dimethyl ether.

  16. Triethylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monoethyl ether ; CASRN 112 - 50 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  17. Triethylene glycol monobutyl ether

    Integrated Risk Information System (IRIS)

    Triethylene glycol monobutyl ether ; CASRN 143 - 22 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  18. Propylene glycol monoethyl ether

    Integrated Risk Information System (IRIS)

    Propylene glycol monoethyl ether ; CASRN 52125 - 53 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  19. p-Bromodiphenyl ether

    Integrated Risk Information System (IRIS)

    p - Bromodiphenyl ether ; CASRN 101 - 55 - 3 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcin

  20. Chloromethyl methyl ether (CMME)

    Integrated Risk Information System (IRIS)

    Chloromethyl methyl ether ( CMME ) ; CASRN 107 - 30 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  1. Propenyl ether monomers for photopolymerization

    DOEpatents

    Crivello, J.V.

    1996-10-22

    Propenyl ether monomers of formula A(OCH{double_bond}CHCH{sub 3}){sub n} wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of the above formula together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  2. Propenyl ether monomers for photopolymerization

    DOEpatents

    Crivello, James V.

    1996-01-01

    Propenyl ether monomers of formula V A(OCH.dbd.CHCH.sub.3).sub.n wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  3. Glycol Ethers As Groundwater Contaminants

    NASA Astrophysics Data System (ADS)

    Ross, Benjamin; Johannson, Gunnar; Foster, Gregory D.; Eckel, William P.

    1992-01-01

    Ether derivatives of dihydroxy alcohols, which are formed from ethylene or propylene, comprise an important group of groundwater contaminants known as glycol ethers. Compounds in this group are used as solvents, cleaning agents, and emulsifiers in many chemical products and manufacturing operations. Glycol ethers have been associated with a variety of toxic effects, and some compounds in the group are relatively potent teratogens. The limited information available suggests that glycol ethers are contaminants in groundwater, especially in anaerobic plumes emanating from disposal of mixed industrial and household waste. Most methods used to analyze groundwater samples cannot adequately detect μg/? (ppb) concentrations of glycol ethers, and the existing methods perform worst for the most widely used and toxic species. A new method capable of analyzing μg/? concentrations of glycol ethers was recently developed, and its use is recommended for groundwater samples where glycol ethers are likely to be present.

  4. Bacterial degradation of glycol ethers.

    PubMed

    Kawai, F

    1995-12-01

    Assimilation of ethyleneglycol (EG) ethers by polyethyleneglycol-utilizing bacteria was examined. Ethyleneglycol ether-utilizing bacteria were also isolated from soil and activated sludge samples by enrichment-culture techniques. Three strains (4-5-3, EC 1-2-1 and MC 2-2-1) were selected and characterized as Pseudomonas sp. 4-5-3, Xanthobacter autotrophicus, and an unidentified gram-negative, non-spore-forming rod respectively. Their growth characteristics were examined: Pseudomonas sp. 4-5-3 assimilated EG (diethyleneglycol, DEG) monomethyl, monoethyl and monobutyl ethers, DEG, propanol and butanol. X. autotrophicus EC 1-2-1 grew well on EG monoethyl and monobutyl ethers, EG and primary alcohols (C1-C4), and slightly on EG monomethyl ether. The strain MC 2-2-1 grew on EG monomethyl ether, EG, primary alcohols (C1-C4), and 1,2-propyleneglycol (PG). The mixed culture of Pseudomonas sp. 4-5-3 and X. autotrophicus EC 1-2-1 showed better growth and improved degradation than respective single cultures towards EG monomethyl, monoethyl or monobutyl ethers. Intact cells of Pseudomonas sp. 4-5-3 degraded various kinds of monoalkyl ethers, which cannot be assimilated by the strain. Metabolic products were characterized from reaction supernatants of intact cells of Pseudomonas sp. 4-5-3 with EG or DEG monoethyl ethers: they were analyzed by thin-layer chromatography and GC-MS and found to be ethoxyacetic acid and ethoxyglycoxyacetic acid. Also, PG monoalkyl ethers (C1-C4), dipropyleneglycol monoethyl and monomethyl ethers and tripropyleneglycol monomethyl ether were assimilated by polypropyleneglycol-utilizing Corynebacterium sp. 7. PMID:8597556

  5. Poly(arylene ether)s That Resist Atomic Oxygen

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Hergenrother, Paul; Smith, Joseph G., Jr.

    1994-01-01

    Novel poly(arylene ether)s containing phosphine oxide (PAEPO's) made via aromatic nucleophilic displacement reactions of activated aromatic dihalides (or, in some cases, activated aromatic dinitro compounds) with new bisphenol monomers containing phosphine oxide. Exhibited favorable combination of physical and mechanical properties and resistance to monatomic oxygen in oxygen plasma environment. Useful as adhesives, coatings, films, membranes, moldings, and composite matrices.

  6. Ether and Relativity

    NASA Astrophysics Data System (ADS)

    Farhoudi, Mehrdad; Yousefian, Maysam

    2016-05-01

    We consider one of the fundamental debates in performing the relativity theory, namely, the ether and the relativity points of view, in a way to aid the learning of the subjects. In addition, we present our views and prospects while describing the issues that being accessible to many physicists and allowing broader views. Also, we very briefly review the two almost recent observations of the Webb redshift and the ultra high energy cosmic rays, and the modified relativity models that have been presented to justify them, wherein we express that these justifications have not been performed via a single model with a single mechanism.

  7. Allene ether Nazarov cyclization.

    PubMed

    Tius, Marcus A

    2014-05-01

    The ease of synthesis and the exceptional reactivity of alkoxyallenes has led to their use in a large number of highly diverse applications. This Report describes their use in various versions of the allene ether Nazarov cyclization. Following a brief introduction to the Nazarov cyclization (Section 1), the oxidative cyclization of vinyl alkoxyallenes is discussed first (Section 2). Nazarov cyclizations of α-alkoxyallenyl vinyl ketones and of α-alkoxyallenyl vinyl tertiary carbinols are covered (Section 3). The discovery and the subsequent rational design of acetals that serve as chiral auxiliaries on the allene in highly enantioselective Nazarov cyclizations is explained (Section 4). Interrupted Nazarov cyclizations of alkoxyallenes that are generated in situ from the isomerization of propargyl ethers on solid supports are discussed, including the evolution of a highly diastereoselective, chiral auxiliary controlled version of the reaction. Some applications of the methodology to natural products total synthesis have been included so as to provide the reader with benchmarks with which to judge the utility of the methodology. PMID:24196585

  8. Functionalization of poly(aryl ether ether ketone)

    SciTech Connect

    Wang, Fei; Roovers, J.

    1993-12-31

    Bromomethyl and dibromomethyl substituted poly(aryl ether ether ketone) have been prepared from methyl poly(aryl ether ether ketone) by bromination with bromine. These brominated polymers are intermediates that can be further functionalized by: hydrolysis, oxidation, substitution etc. A series of new functionalized PEEK polymers has been prepared. The functional group includes -CH{sub 2}OH, -CH{sub 2}OCH{sub 3}, -CHO, -COOH, -COOCH{sub 3}, -CH{sub 2}CN, -CH{sub 2}COOH, -CH{sub 2}OCOCH{sub 3}, -CH{sub 2}N{sup +}H(CH{sub 2}CH{sub 3}){sub 2}Br{sup {minus}}, -CH{sub 2}N(CH{sub 2}CH{sub 3}){sub 2}, -CH{sub 2}N{sup +}H(CH{sub 2}CH{sub 3}){sub 3}Br{sup {minus}}.

  9. Polyarylene Ethers with Improved Properties

    NASA Technical Reports Server (NTRS)

    Hergenrother, P. M. (Inventor); Jensen, B. J. (Inventor); Havens, S. J. (Inventor)

    1986-01-01

    This invention relates to novel polyarylene ethers which possess the combination of high strength, toughness, and high use temperature with ease of extrusion and formation into complex objects. These polyarylene ethers are suitable for use in adhesives, coatings, films, membranes, and composite matrices. The polyarylene ethers of this invention are the polycondensation products from the reaction of either 1,3-bis (4-chloro or fluorobenzoyl) benzene with any one of the following bisphenolic compounds: bis (3-hydroxyphenyl) methane; bis (4-hydroxyphenyl) methane; 1,1-dimethyl-bis (4-hydroxyphenyl)methane, or 9,9-bis (4-hydroxyphenyl) fluorene. Random and block copolymers are also comprehended.

  10. Imide/Arylene Ether Copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Hergenrother, Paul M.; Bass, Robert G.

    1991-01-01

    New imide/arylene ether copolymers prepared by reacting anhydride-terminated poly(amic acids) with amine-terminated poly(arylene ethers) in polar aprotic solvents. Each resulting copolymer may have one glass-transition temperature or two, depending on chemical structure and/or compatibility of block units. Most of copolymers form tough, solvent-resistant films with high tensile properties. Films cast from solution tough and flexible, and exhibit useful thermal and mechanical properties. Potentially useful as moldings, adhesives, or composite matrices. Because of flexible arylene ether blocks, these copolymers easier to process than polyimides.

  11. Rearrangements of Cycloalkenyl Aryl Ethers.

    PubMed

    Törincsi, Mercedesz; Nagy, Melinda; Bihari, Tamás; Stirling, András; Kolonits, Pál; Novak, Lajos

    2016-01-01

    Rearrangement reactions of cycloalkenyl phenol and naphthyl ethers and the acid-catalyzed cyclization of the resulting product were investigated. Claisen rearrangement afforded 2-substituted phenol and naphthol derivatives. Combined Claisen and Cope rearrangement resulted in the formation of 4-substituted phenol and naphthol derivatives. In the case of cycloocthylphenyl ether the consecutive Claisen and Cope rearrangements were followed by an alkyl migration. The mechanism of this novel rearrangement reaction is also discussed. PMID:27104504

  12. Imide/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor); Bass, Robert G. (Inventor)

    1992-01-01

    Imide/arylene ether block copolymers are prepared by reacting anhydride terminated poly(amic acids) with amine terminated poly(arylene ethers) in polar aprotic solvents and by chemically or thermally cyclodehydrating the resulting intermediate poly(amic acids). The resulting block copolymers have one glass transition temperature or two, depending upon the particular structure and/or the compatibility of the block units. Most of these block copolymers form tough, solvent resistant films with high tensile properties.

  13. Space, Time, Ether, and Kant

    NASA Astrophysics Data System (ADS)

    Wong, Wing-Chun Godwin

    This dissertation focused on Kant's conception of physical matter in the Opus postumum. In this work, Kant postulates the existence of an ether which fills the whole of space and time with its moving forces. Kant's arguments for the existence of an ether in the so-called Ubergang have been acutely criticized by commentators. Guyer, for instance, thinks that Kant pushes the technique of transcendental deduction too far in trying to deduce the empirical ether. In defense of Kant, I held that it is not the actual existence of the empirical ether, but the concept of the ether as a space-time filler that is subject to a transcendental deduction. I suggested that Kant is doing three things in the Ubergang: First, he deduces the pure concept of a space-time filler as a conceptual hybrid of the transcendental object and permanent substance to replace the category of substance in the Critique. Then he tries to prove the existence of such a space-time filler as a reworking of the First Analogy. Finally, he takes into consideration the empirical determinations of the ether by adding the concept of moving forces to the space -time filler. In reconstructing Kant's proofs, I pointed out that Kant is absolutely committed to the impossibility of action-at-a-distance. If we add this new principle of no-action-at-a-distance to the Third Analogy, the existence of a space-time filler follows. I argued with textual evidence that Kant's conception of ether satisfies the basic structure of a field: (1) the ether is a material continuum; (2) a physical quantity is definable on each point in the continuum; and (3) the ether provides a medium to support the continuous transmission of action. The thrust of Kant's conception of ether is to provide a holistic ontology for the transition to physics, which can best be understood from a field-theoretical point of view. This is the main thesis I attempted to establish in this dissertation.

  14. Sulfonimide-containing poly(arylene ether)s and poly(arylene ether sulfone)s, methods for producing the same, and uses thereof

    DOEpatents

    Hofmann, Michael A.

    2006-11-14

    The present invention is directed to sulfonimide-containing polymers, specifically sulfonimide-containing poly(arylene ether)s and sulfonimide-containing poly(arylene ether sulfone)s, and processes for making the sulfonimide-containing poly(arylene ether)s and sulfonimide-containing poly(arylene ether sulfone)s, for use conductive membranes and fuel cells.

  15. 40 CFR 721.3380 - Anilino ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Anilino ether. 721.3380 Section 721... Anilino ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as anilino ether (P-83-910) is subject to reporting under this section...

  16. 40 CFR 721.3364 - Aliphatic ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aliphatic ether. 721.3364 Section 721... Aliphatic ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an aliphatic ether (PMN P-93-1381) is subject to reporting under...

  17. 40 CFR 721.3364 - Aliphatic ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Aliphatic ether. 721.3364 Section 721... Aliphatic ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as an aliphatic ether (PMN P-93-1381) is subject to reporting under...

  18. 40 CFR 721.3374 - Alkylenediolalkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkylenediolalkyl ether. 721.3374... Substances § 721.3374 Alkylenediolalkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as an alkylenediolalkyl ether (PMN P-93-362) is subject...

  19. 40 CFR 721.3437 - Dialkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dialkyl ether. 721.3437 Section 721... Dialkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as dialkyl ether (PMN P-93-1308) is subject to reporting under this...

  20. 40 CFR 721.3374 - Alkylenediolalkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Alkylenediolalkyl ether. 721.3374... Substances § 721.3374 Alkylenediolalkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as an alkylenediolalkyl ether (PMN P-93-362) is subject...

  1. 40 CFR 721.3437 - Dialkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl ether. 721.3437 Section 721... Dialkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as dialkyl ether (PMN P-93-1308) is subject to reporting under this...

  2. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  3. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  4. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  5. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  6. 21 CFR 868.5420 - Ether hook.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ether hook. 868.5420 Section 868.5420 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5420 Ether hook. (a) Identification. An ether hook is a...

  7. Lacinilene C 7-methyl ether

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lacinilene C 7-methyl ether is an antimicrobial compound produced by the cotton plant in response to attack by pathogens. For the first time, we now report the crystal structure of this compound. This may prove useful in studies on the interaction of the compound with pathogenic fungal cells....

  8. Desoxyhemigossypol-6-methyl-ether

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Desoxyhemigossypol-6-methyl ether is an antimicrobial compound produced by the cotton plant in response to attack by pathogens. For the first time, we now report the crystal structure of this compound. This may prove useful in studies on the interaction of the compound with pathogenic fungal cells...

  9. Bis(chloromethyl)ether (BCME)

    Integrated Risk Information System (IRIS)

    Bis ( chloromethyl ) ether ( BCME ) ; CASRN 542 - 88 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

  10. Propylene glycol monomethyl ether (PGME)

    Integrated Risk Information System (IRIS)

    Propylene glycol monomethyl ether ( PGME ) ; CASRN 107 - 98 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assess

  11. Bis(chloroethyl)ether (BCEE)

    Integrated Risk Information System (IRIS)

    Bis ( chloroethyl ) ether ( BCEE ) ; CASRN 111 - 44 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments fo

  12. p,p\\'-Dibromodiphenyl ether

    Integrated Risk Information System (IRIS)

    p , p ' - Dibromodiphenyl ether ; CASRN 2050 - 47 - 7 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for

  13. A new alternative to expandable pedicle screws: Expandable poly-ether-ether-ketone shell.

    PubMed

    Demir, Teyfik

    2015-05-01

    Screw pullout is a very common problem in the fixation of sacrum with pedicle screws. The principal cause of this problem is that the cyclic micro motions in the fixation of sacrum are higher than the other regions of the vertebrae that limit the osteo-integration between bone and screw. In addition to that, the bone quality is very poor at sacrum region. This study investigated a possible solution to the pullout problem without the expandable screws' handicaps. Newly designed poly-ether-ether-ketone expandable shell and classical pedicle screws were biomechanically compared. Torsion test, pullout tests, fatigue tests, flexion/extension moment test, axial gripping capacity tests and torsional gripping capacity tests were conducted in accordance with ASTM F543, F1798 and F1717. Standard polyurethane foam and calf vertebrae were used as embedding medium for pullout tests. Classical pedicle screw pullout load on polyurethane foam was 564.8 N compared to the failure load for calf vertebrae's 1264 N. Under the same test conditions, expandable poly-ether-ether-ketone shell system's pullout loads from polyurethane foam and calf vertebrae were 1196.3 and 1890 N, respectively. The pullout values for expandable poly-ether-ether-ketone shell were 33% and 53% higher than classical pedicle screw on polyurethane foam and calf vertebrae, respectively. The expandable poly-ether-ether-ketone shell exhibited endurance on its 90% of yield load. Contrary to poly-ether-ether-ketone shell, classical pedicle screw exhibited endurance on 70% of its yield load. Expandable poly-ether-ether-ketone shell exhibited much higher pullout performance than classical pedicle screw. Fatigue performance of expandable poly-ether-ether-ketone shell is also higher than classical pedicle screw due to damping the micro motion capacity of the poly-ether-ether-ketone. Expandable poly-ether-ether-ketone shell is a safe alternative to all other expandable pedicle screw systems on mechanical perspective

  14. Liquid Densities of Fluorinated Ethers

    NASA Astrophysics Data System (ADS)

    Nakazawa, Noriaki; Sako, Takeshi; Nakane, Takashi; Sekiya, Akira; Kawamura, Mitsutaka; Sato, Masahito; Mochizuki, Yuji; Takada, Naoto; Yasumoto, Masahiko

    The liquid densities of thirteen fluorinated ethers which are expected as promising candidates of CFC alternatives were measured at temperatures from 278 K to 323 K and atmospheric pressure. The fluorinated ethers used in this study are 1-difluoromethoxy-1,1, 2- trifluoroethane, 1-methoxy-1, 1,2,2-tetrafluoroethane, 1-methoxy-2,2 ,3 ,3- tetrafluoropropane, 1-methoxy-1-trifluoromethy1-2,2 ,2- trifluoroethane, 1-methoxy-1,1,2,2, 3-hexafluoropropane,1-difluoromethoxy-2,2, 3, 3 -tetrafluoropropane, 1-methoxy-heptafluoropropane,1-difluoromethoxy-2, 2, 3, 3, 3-pentafluoropropane, 1- (2, 2, 2-trifruoroethoxy) -1, 1, 2,2-tetrafluoroethane, 1-pentafluoroethoxy-1, 1, 2, 2-tetrafluoroethane,2-trifluoromethoxy-1, 1, 1,2-tetrafluorobutane, 1-proxynonafluorobutane, and 1-ethoxy-undecafluoropentane. The liquid density has been measured by the vibrating tube densitometer (ANTON PARR, DMA 602) within an error of 0.07%. The liquid densities decrease monotonically with increase of temperature.

  15. Measuring exposures to glycol ethers.

    PubMed

    Clapp, D E; Zaebst, D D; Herrick, R F

    1984-08-01

    In 1981, NIOSH began investigating the potential reproductive health effects resulting from exposures to a class of organic solvents known generically as glycol ethers (GE). This research was begun as a result of the NIOSH criteria document development program which revealed little data available on the health effects of glycol ether exposure. Toxicologic research was begun by NIOSH and other researchers which suggested substantial reproductive effects in animals. These animal data motivated a study of human exposures in the occupational setting. In 1981 and 1982 NIOSH conducted several walk-through surveys which included preliminary measurements of exposures in a variety of industries including painting trades, coal mining, production blending and distribution facilities, aircraft fueling, and communications equipment repair facilities. The human exposure data from these surveys is summarized in this paper with most results well below 1 parts per million (ppm) and only a few values approaching 10 ppm. Blood samples were collected at one site resulting in GE concentrations below the limit of detection. Exposures to airborne glycol ethers, in the industries investigated during the collection of this data, revealed several problems in reliably sampling GE at low concentrations. It became apparent, from the data and observations of work practices, that air monitoring alone provided an inadequate index of GE exposure. Further field studies of exposure to GE are anticipated, pending location of additional groups of exposed workers and development of more reliable methods for characterizing exposure, especially biological monitoring. PMID:6499824

  16. Crystalline Imide/Arylene Ether Copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Hergenrother, Paul M.; Bass, Robert G.

    1991-01-01

    Series of imide/arylene ether block copolymers prepared by using arylene ether blocks to impart low melt viscosity, and imide blocks to provide high strength and other desirable mechanical properties. Work represents extension of LAR-14159 on imide/arylene ether copolymers in form of films, moldings, adhesives, and composite matrices. Copolymers potentially useful in variety of high-temperature aerospace and microelectronic applications.

  17. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, Hung Sui; Yang, Xiao-Oing; McBreen, James

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI.sup.+ ion in alkali metal batteries.

  18. Aza crown ether compounds as anion receptors

    DOEpatents

    Lee, H.S.; Yang, X.O.; McBreen, J.

    1998-08-04

    A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI{sup +} ion in alkali metal batteries. 3 figs.

  19. LaRC-ITPI/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Working, Dennis C.

    1991-01-01

    As part of an effort to develop high performance structural resins for aerospace applications, work has continued on block copolymers containing imide and arylene ether segments. The arylene ether block used in this study contains a bulky fluorene group in the polymer backbone while the imide block contains an arylene ketone segment similar to that in the arylene ether block and has been named LaRC-ITPI. A series of imide/arylene ether block and segmented copolymers were prepared and characterized. Films were prepared from these copolymers and mechanical properties were measured.

  20. Flow-Induced Crystallization of Poly(ether ether ketone)

    NASA Astrophysics Data System (ADS)

    Nazari, Behzad; Rhoades, Alicyn; Colby, Ralph

    The effects of an interval of shear above the melting temperature Tm on subsequent isothermal crystallization below Tm is reported for the premier engineering thermoplastic, poly(ether ether ketone) (PEEK). The effect of shear on the crystallization rate of PEEK is investigated by means of rheological techniques and differential scanning calorimetry (DSC) under a protocol of imposing shear in a rotational cone and plate rheometer and monitoring crystallization after quenching. The rate of crystallization at 320 °C was not affected by shear for shear rates <7 s-1 at 350 °C, whereas intervals of adequate shear at higher shear rates prior to the quench to 320 °C accelerated crystallization significantly. As the duration of the interval of shear above 7 s-1 is increased, the crystallization time decreases but at each shear rate eventually saturates once the applied specific work exceeds ~120 MPa. The annealing of the flow-induced precursors was also investigated. The nuclei were fairly persistent at temperatures close to 350 °C, however very unstable at temperatures above 375 °C. This suggests that the nanostructures formed under shear might be akin to crystalline lamellae of greater thickness, compared to quiescently crystallized lamellae.

  1. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  2. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT....108 Ethyl ether. (a) Odor. Characteristic odor. (b) Specific gravity at 15.56 °/15.56 °C. Not...

  3. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  4. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  5. 27 CFR 21.108 - Ethyl ether.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Ethyl ether. 21.108 Section 21.108 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL FORMULAS FOR DENATURED ALCOHOL AND RUM Specifications for Denaturants § 21.108 Ethyl ether. (a) Odor. Characteristic odor....

  6. Purification of aqueous cellulose ethers

    SciTech Connect

    Bartscherer, K.A.; de Pablo, J.J.; Bonnin, M.C.; Prausnitz, J.M.

    1990-07-01

    Manufacture of cellulose ethers usually involves high amounts of salt by-products. For application of the product, salt must be removed. In this work, we have studied the injection of high-pressure CO{sub 2} into an aqueous polymer-salt solution; we find that upon addition of isopropanol in addition to CO{sub 2}, the solution separates into two phases. One phase is rich in polymer and water, and the other phase contains mostly isopropanol, water and CO{sub 2}. The salt distributes between the two phases, thereby offering interesting possibilities for development of a new purification process for water-soluble polymers. This work presents experimental phase-equilibrium data for hydroxyethyl cellulose and sodium carboxymethyl cellulose with sodium acetate and potassium sulfate, respectively, in the region 40{degree}C and 30 to 80 bar. Based on these data, we suggest a process for the manufacture and purification of water-soluble cellulose ethers. 15 refs., 14 figs., 9 tabs.

  7. Bacterial Utilization of Ether Glycols

    PubMed Central

    Fincher, Edward L.; Payne, W. J.

    1962-01-01

    A soil bacterium capable of using oligo- and polyethylene glycols and ether alcohols as sole sources of carbon for aerobic growth was isolated. The effects of substituent groups added to the ether bonds on the acceptability of the compounds as substrates were studied. Mechanisms for the incorporation of two-carbon compounds were demonstrated by the observation that acetate, glyoxylate, ethylene glycol, and a number of the tricarboxylic acid cycle intermediates served as growth substrates in minimal media. The rate of oxidation of the short-chained ethylene glycols by adapted resting cells varied directly with increasing numbers of two-carbon units in the chains from one to four. The amount of oxygen consumed per carbon atom of oligo- and polyethylene glycols was 100% of theoretical, but only 67% of theoretical for ethylene glycol. Resting cells oxidized oligo- and polyethylene glycols with 2 to 600 two-carbon units in the chains. Longer chained polyethylene glycols (up to 6,000) were oxidized at a very slow rate by these cells. Dehydrogenation of triethylene glycol by adapted cells was observed, coupling the reaction with methylene blue reduction. PMID:13945208

  8. Solvent-induced crystallization of poly(ether ether ketone)

    NASA Astrophysics Data System (ADS)

    McPeak, Jennifer Lynne

    The purpose of this study was learn how the diffusion, swelling, and crystallization processes are coupled during solvent-induced crystallization of poly(ether ether ketone) (PEEK). Unoriented amorphous PEEK films were immersed in aprotic organic liquids at ambient temperature and bulk properties or characteristics were monitored as a function of immersion time. The sorption behavior, T g and Tm° suppression, crystallinity, and dynamic mechanical response were correlated as a function of solvent chemistry and immersion time. The saturation time of methylene chloride, 1,3-dichloropropane, tetrahydrofuran, cyclopentanone, chlorobenzene, toluene, diethyl ketone, and ethylbenzene in amorphous PEEK films were found to range from hours to days depending on the level of polymer-solvent interactions. In-situ isochronal DMA spectra show that the Tg of PEEK was suppressed from 150°C to below ambient temperature such that crystallization was kinetically feasible during ambient immersion. In addition, an increase in viscoelastic dispersion was attributed to the presence of crystallinity. From dynamic mass uptake and wide-angle x-ray diffraction (WAXD) results, it was found that the bulk sorption rate was equal to the bulk crystallization rate for all solvent systems that promoted SINC and PEEK exhibited diffusion-limited crystallization, irrespective of the nature of the transport mechanism. In addition, the solvent-induced crystals exhibit preferred orientation as supported by photographic WAXD. A distinct sorption front, observed with scanning electron microscopy, further supports the scenario of diffusion-controlled crystallization and one-dimensional diffusion. Isothermal DMA spectra for THF, cyclopentanone, and chlorobenzene, indicate that, as the solvent diffuses into the films, the stiffness of the polymer decreases at short times, begins to increase, and then reaches a relatively time-independent value. It was determined that the initial decrease in the storage

  9. Phenylethynl-terminated poly(arylene ethers)

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Bryant, Robert G. (Inventor); Hergenrother, Paul M. (Inventor)

    1993-01-01

    Phenylethynyl-terminated poly(arylene ethers) are prepared in a wide range of molecular weights by adjusting monomer ratio and adding an appropriate amount of 4-fluoro- 4'-phenylethynyl benzophenone during polymer synthesis. The resulting phenylethynyl-terminated poly(arylene ethers) react and crosslink upon curing for one hour at 350 C to provide materials with improved solvent resistance, higher modulus, and better high temperature properties than the linear, uncrosslinked polymers.

  10. Imide/arylene ether copolymers. I

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

    1991-01-01

    The preparation of a series of novel imide/arylene ether copolymers is described together with the results of viscosity and DSC Tg(Tm) measurements. The copolymers were synthesized from an arylene ether block and either an amorphous or semicrystalline imide block. One block copolymer was end-capped, and the molecular weight was controlled to improve compression moldability. The paper also presents results of mechanical properties tests on copolymer samples.

  11. Anaerobic biodegradation of ether compounds by ether bond-cleaving bacteria and methanogenic consortia

    SciTech Connect

    Dwyer, D.F.

    1989-01-01

    Ether compounds are manufactured for use in nonionic detergents, plastics, pesticides and other products and occur as toxic organic compounds, the most famous being tetrachlorodibenzo-p-dioxin. Ether compounds were considered recalcitrant to anaerobic biodegradation due to the lack of an appropriate oxidant for ether bond-cleavage in reducing environments. Many of these compounds reside in anaerobic environments or are exposed to anaerobic waste treatment processes. Thus, it is of interest to identify: (i) whether ether compounds are anaerobically biodegradable, (ii) the anaerobic microorganisms able to degrade these compounds, and (iii) the mechanism(s) of anaerobic ether bond-cleavage. The ether bonds of polyethylene glycol (PEG; HO-(CH{sub 2}CH{sub 2}-O-){sub n}H), phenyl ether ((C{sub 6}H{sub 5}){sub 2}O), and dibenzo-p-dioxin ((C{sub 6}H{sub 4}){sub 2}O{sub 2}) were shown to be degraded in methanogenic consortia enriched with these compounds and polyethoxylate (nonionic) surfactants as substrates. Two anaerobic microorganisms which used PEGs as sole substrates were isolated and characterized. Desulfovibrio desulfuricans strain DG2 degraded the monomer ethylene glycol and oligomers up to tetraethylene glycol (HO-(CH{sub 2}CH{sub 2}-O-){sub 4}H) in length. Bacteroides sp. strain PG1 degraded diethylene glycol and all other polymer lengths of PEG. PEGs were degraded by Bacteroides sp. strain PG1 via an external depolymerization which was either a hydrolytic or a reductive cleavage of the ether bond. The ether bond of diaryl ethers was apparently cleaved by a reductive mechanism which produced benzene and phenol as products from phenyl ether degradation and benzene and, by indirect analysis, catechol from dibenzo-dioxin.

  12. Conformations and Barriers to Methyl Group Internal Rotation in Two Asymmetric Ethers: Propyl Methyl Ether and Butyl Methyl Ether

    NASA Astrophysics Data System (ADS)

    Long, B. E.; Dechirico, F.; Cooke, S. A.

    2012-06-01

    The conformational preferences of the O-C-C-C unit are important in many biological systems with the unit generally preferring a gauche configuration compared to an anti configuration. Butyl methyl ether and propyl methyl ether provide very simple systems for this phenomenom to manifest. Pure rotational spectra of the title molecules have been recorded using chirped pulse Fourier transform microwave spectroscopy (CP-FTMW). In the case of butyl methyl ether, only one conformer has been observed. This conformer has torsional angles of COCC = 180°, OCCC = 62° and CCCC = 180° (anti-gauche-anti) and rotational constants of A = 10259.4591(33) MHz, B = 1445.6470(13) MHz, and C = 1356.2944(14) MHz. The rotational spectrum was doubled and has been analyzed to produce an effective barrier to methyl group internal rotation of 780(35) cm-1. A prior rotational spectroscopic study on propyl methyl ether had focused only on the high energy anti-anti conformer. We have analyzed spectra from the lowest energy anti-gauche conformer and the spectroscopic constants will be presented. A summary of the differences in conformational energies and methyl group internal rotation barriers for the class of aliphatic asymmetric ethers will be presented. K. N. Houk, J. E. Eksterowicz, Y.-D. Wu, C. D. Fuglesang, D. B. Mitchell. J. Am. Chem. Soc. 115 (4170), 1993. Hiroshi Kato, Jun Nakagawa, Michiro Hayashi. J. Mol. Spectrosc. 80 (272), 1980.

  13. Four 3-cyanodifurazanyl ethers: potential propellants.

    PubMed

    Averkiev, Boris B; Antipin, Mikhail Yu; Sheremetev, Aleksey B; Timofeeva, Tatiana V

    2003-07-01

    In earlier papers, we described the synthesis and structures of bis(3-nitrofurazan-4-yl) ether, C(4)N(6)O(7), (I), bis[3-(nitro-N,N,O-azoxy)furazan-4-yl] ether, C(4)N(10)O(9), (II), and bis[3-(5H-[1,2,3]triazolo[4,5-c]furazan-5-yl)furazan-4-yl] ether, C(8)N(14)O(5), (III). Here we compare the structures of (I)-(III) with those of four 3-cyanodifurazanyl ethers, namely bis(3-cyanofurazan-4-yl) ether, C(6)N(6)O(3), (IV), 3-cyanofurazanyl 3-nitrofurazanyl ether, C(5)N(6)O(5), (V), 3,4-bis(3-cyanofurazan-4-yloxy)furazan, C(8)N(8)O(5), (VI), and bis[3-(3-cyanofurazan-4-yloxy)furazan-4-yl]diazene, C(10)N(12)O(6), (VII). It was found that the geometric parameters of the difurazanyl ether fragments are similar in these structures and therefore not influenced by substituent effects; however, the conformation of this fragment is different, viz. structures (I), (III), (V) and (VI) have approximate C(2) symmetry, and structures (II), (IV) and (VII) have C(s) symmetry. Dense crystal packing (1.626-1.898 Mg m(-3)) is characteristic for all these hydrogen-free compounds. A linear correlation is also determined between crystal density and 'molecular density' (M/V), where M is the mass of a molecule and V is the molecular volume. PMID:12855864

  14. Mutagenicity of aromatic glycidyl ethers with Salmonella.

    PubMed

    Rosman, L B; Chakraborty, P K; Messerly, E A; Sinsheimer, J E

    1988-09-01

    6 aromatic glycidyl ethers containing naphthyl, biphenyl or benzylphenyl substituents were synthesized. These epoxides together with the commercially available compounds 2-biphenylyl glycidyl ether were examined for dose-mutagenicity relationships using the plate incorporation Ames test with Salmonella typhimurium strains TA100 and TA1535. Structure-mutagenicity relationships were further examined for these compounds and 3 phenyl glycidyl ethers by concurrent testing at a single dose with strain TA100. Meaningful correlations could not be established for the mutagenicity of these epoxides to their molecular volumes, partition values, nor to their reactivities with the model nucleophile, 4-(4-nitrobenzyl) pyridine. However, it was noted that increased conjugated aromatic unsaturation with its resulting planarity led to increased mutagenicity and that this effect decreased when it was further removed from the epoxide moiety. PMID:3045534

  15. Inhalation anaesthesia: from diethyl ether to xenon.

    PubMed

    Bovill, J G

    2008-01-01

    Modern anaesthesia is said to have began with the successful demonstration of ether anaesthesia by William Morton in October 1846, even though anaesthesia with nitrous oxide had been used in dentistry 2 years before. Anaesthesia with ether, nitrous oxide and chloroform (introduced in 1847) rapidly became commonplace for surgery. Of these, only nitrous oxide remains in use today. All modern volatile anaesthetics, with the exception of halothane (a fluorinated alkane), are halogenated methyl ethyl ethers. Methyl ethyl ethers are more potent, stable and better anaesthetics than diethyl ethers. They all cause myocardial depression, most markedly halothane, while isoflurane and sevoflurane cause minimal cardiovascular depression. The halogenated ethers also depress the normal respiratory response to carbon dioxide and to hypoxia. Other adverse effects include hepatic and renal damage. Hepatitis occurs most frequently with halothane, although rare cases have been reported with the other agents. Liver damage is not caused by the anaesthetics themselves, but by reactive metabolites. Type I hepatitis occurs fairly commonly and takes the form of a minor disturbance of liver enzymes, which usually resolves without treatment. Type II, thought to be immune-mediated, is rare, unpredictable and results in a severe fulminant hepatitis with a high mortality. Renal damage is rare, and was most often associated with methoxyflurane because of excessive plasma fluoride concentrations resulting from its metabolism. Methoxyflurane was withdrawn from the market because of the high incidence of nephrotoxicity. Among the contemporary anaesthetics, the highest fluoride concentrations have been reported with sevoflurane, but there are no reports of renal dysfunction associated with its use. Recently there has been a renewed interest in xenon, one of the noble gases. Xenon has many of the properties of an ideal anaesthetic. The major factor limiting its more widespread is the high cost, about

  16. 41. LOOKING WEST AT BUILDING NO. 519, ETHER AND ALCOHOL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. LOOKING WEST AT BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, (LEFT) AND BUILDING NO. 521, ETHER VAULT, (RIGHT) IN FOREGROUND - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  17. 37. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, NORTHWEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, NORTHWEST CORNER OF BUILDING. BUILDING NO. 521 (ETHER VAULT) IN BACKGROUND LEFT. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  18. Crystalline imide/arylene ether copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor); Bass, Robert G. (Inventor)

    1995-01-01

    Crystalline imide/arylene ether block copolymers are prepared by reacting anhydride terminated poly(amic acids) with amine terminated poly)arylene ethers) in polar aprotic solvents and chemically or thermally cyclodehydrating the resulting intermediate poly(amic acids). The block copolymers of the invention have one glass transition temperature or two, depending on the particular structure and/or the compatibility of the block units. Most of these crystalline block copolymers for tough, solvent resistant films with high tensile properties. While all of the copolymers produced by the present invention are crystalline, testing reveals that copolymers with longer imide blocks or higher imide content have increased crystallinity.

  19. Vinyl ethers containing an epoxy group. XVI. Reaction of glycidol vinyloxyethyl ether with acetals

    SciTech Connect

    Nedolya, N.A.; Khil'ko, M.Ya.; Trofimov, B.A.; Sigalov, M.V.

    1988-10-10

    In order to obtain branched acetals with epoxide groups (prospective monomers and intermediates) the authors investigated the reaction of acetaldehyde diethyl and di(1,1,3-trihydrotetrafluoropropyl) acetals with glycidol vinyloxyethyl ether. The addition of acetals to vinyl epoxy ethers was realized, and the first representative of compounds of this type, i.e., 9-glycidyloxy-6-ethoxy-4-methyl-3,7-dioxanonane, was obtained. It was also impossible to add a fluoroacetal to butyl vinyl ether (0.08-1.00 wt. % of catalyst CF/sub 3/COOH, BF/sub 3//times/ OEt/sub 2/, 20-80/degree/C, 0.5-3 h).

  20. High octane ethers from synthesis gas-derived alcohols

    SciTech Connect

    Klier, K.; Herman, R.G.; Johansson, M.; Feeley, O.C.

    1992-01-01

    The objective of the proposed research is to synthesize high octane ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from H{sub 2}/CO/CO{sub 2} coal-derived synthesis gas via alcohol mixtures that are rich in methanol and 2-methyl-1-propanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers.

  1. 39. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, LOOKING AT SOUTHWEST CORNER WITH BUILDING NO. 521, ETHER VAULT, AND BUILDING NO. 519-A, ETHER & ALOCOHL STORAGE TANKS, IN BACKGROUND RIGHT. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  2. 40 CFR 721.10551 - Bisphenol S mono ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Bisphenol S mono ether (generic). 721... Substances § 721.10551 Bisphenol S mono ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisphenol S mono ether (PMN...

  3. 40 CFR 721.10551 - Bisphenol S mono ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Bisphenol S mono ether (generic). 721... Substances § 721.10551 Bisphenol S mono ether (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as bisphenol S mono ether (PMN...

  4. 40 CFR 721.3440 - Haloalkyl substituted cyclic ethers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Haloalkyl substituted cyclic ethers... Substances § 721.3440 Haloalkyl substituted cyclic ethers. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances haloalkyl substituted cyclic ethers (PMN P-85-368 and...

  5. 40 CFR 721.3520 - Aliphatic polyglycidyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aliphatic polyglycidyl ether. 721.3520... Substances § 721.3520 Aliphatic polyglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance aliphatic polyglycidyl ether (PMN P-89-1036) is subject...

  6. 40 CFR 721.3440 - Haloalkyl substituted cyclic ethers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Haloalkyl substituted cyclic ethers... Substances § 721.3440 Haloalkyl substituted cyclic ethers. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances haloalkyl substituted cyclic ethers (PMN P-85-368 and...

  7. 40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new...

  8. 40 CFR 721.3438 - Chlorohydroxyalkyl butyl ether (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chlorohydroxyalkyl butyl ether... Specific Chemical Substances § 721.3438 Chlorohydroxyalkyl butyl ether (generic). (a) Chemical substance... chlorohydroxyalkyl butyl ether (PMN P-99-1295) is subject to reporting under this section for the significant new...

  9. 40 CFR 721.3480 - Halogenated biphenyl glycidyl ethers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated biphenyl glycidyl ethers... Substances § 721.3480 Halogenated biphenyl glycidyl ethers. (a) Chemical substance and significant new uses... ethers (PMNs P-90-1844, P-90-1845, and P-90-1846) are subject to reporting under this section for...

  10. 40 CFR 721.3480 - Halogenated biphenyl glycidyl ethers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Halogenated biphenyl glycidyl ethers... Substances § 721.3480 Halogenated biphenyl glycidyl ethers. (a) Chemical substance and significant new uses... ethers (PMNs P-90-1844, P-90-1845, and P-90-1846) are subject to reporting under this section for...

  11. 40 CFR 721.3486 - Polyglycerin mono(4-nonylphenyl) ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyglycerin mono(4-nonylphenyl) ether... Substances § 721.3486 Polyglycerin mono(4-nonylphenyl) ether. (a) Chemical substance and significant new uses...-nonylphenyl) ether (PMN P-94-2230) is subject to reporting under this section for the significant new...

  12. 40 CFR 721.10069 - Ether amine phosphonate (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ether amine phosphonate (generic). 721... Substances § 721.10069 Ether amine phosphonate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as ether amine phosphonate (PMN...

  13. 40 CFR 721.3465 - Stilbene diglycidyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Stilbene diglycidyl ether. 721.3465... Substances § 721.3465 Stilbene diglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as stilbene diglycidyl ether (PMN P-96-1427) is subject...

  14. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  15. 40 CFR 721.3486 - Polyglycerin mono(4-nonylphenyl) ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Polyglycerin mono(4-nonylphenyl) ether... Substances § 721.3486 Polyglycerin mono(4-nonylphenyl) ether. (a) Chemical substance and significant new uses...-nonylphenyl) ether (PMN P-94-2230) is subject to reporting under this section for the significant new...

  16. 40 CFR 721.3430 - 4-Bromophenyl phenyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false 4-Bromophenyl phenyl ether. 721.3430... Substances § 721.3430 4-Bromophenyl phenyl ether. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance 4-bromophenyl phenyl ether (CAS No. 101-55-3) is subject to...

  17. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Perhalo alkoxy ether. 721.3500 Section... Substances § 721.3500 Perhalo alkoxy ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227)...

  18. 40 CFR 721.3550 - Dipropylene glycol dimethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dipropylene glycol dimethyl ether. 721... Substances § 721.3550 Dipropylene glycol dimethyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified as dipropylene glycol dimethyl ether (PMN...

  19. 40 CFR 721.3420 - Brominated arylalkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Brominated arylalkyl ether. 721.3420... Substances § 721.3420 Brominated arylalkyl ether. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as brominated arylalkyl ether (P-83-906)...

  20. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Perhalo alkoxy ether. 721.3500 Section... Substances § 721.3500 Perhalo alkoxy ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227)...

  1. 40 CFR 721.10069 - Ether amine phosphonate (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ether amine phosphonate (generic). 721... Substances § 721.10069 Ether amine phosphonate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as ether amine phosphonate (PMN...

  2. 40 CFR 721.3430 - 4-Bromophenyl phenyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false 4-Bromophenyl phenyl ether. 721.3430... Substances § 721.3430 4-Bromophenyl phenyl ether. (a) Chemical substance and significant new use subject to reporting. (1) The chemical substance 4-bromophenyl phenyl ether (CAS No. 101-55-3) is subject to...

  3. 40 CFR 721.3520 - Aliphatic polyglycidyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Aliphatic polyglycidyl ether. 721.3520... Substances § 721.3520 Aliphatic polyglycidyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance aliphatic polyglycidyl ether (PMN P-89-1036) is subject...

  4. Alkyl Aryl Ether Bond Formation with PhenoFluor**

    PubMed Central

    Shen, Xiao; Neumann, Constanze N.; Kleinlein, Claudia; Claudia, Nathaniel W.; Ritter, Tobias

    2015-01-01

    An alkyl aryl ether bond formation reaction between phenols and primary and secondary alcohols with PhenoFluor has been developed. The reaction features a broad substrate scope and tolerates many functional groups, and substrates that are challenging for more conventional ether bond forming processes may be coupled. A preliminary mechanistic study indicates reactivity distinct from conventional ether bond formation. PMID:25800679

  5. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  6. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  7. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  8. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Polyoxyethylene (23) lauryl ether blocks. (a) Specifications. Each molasses-based block contains 2.2 percent polyoxyethylene (23) lauryl ether. (b) Sponsor. See No. 067949 in § 510.600(c) of this chapter. (c) Conditions of... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Polyoxyethylene (23) lauryl ether blocks....

  9. Synthesis and characterizations of electrospun sulfonated poly (ether ether ketone) SPEEK nanofiber membrane

    NASA Astrophysics Data System (ADS)

    Hasbullah, N.; Sekak, K. A.; Ibrahim, I.

    2016-07-01

    A novel electrospun polymer electrolyte membrane (PEM) based on Sulfonated Poly (ether ether ketone) were prepared and characterized. The poly (ether ether ketone) PEEK was sulfonated using concentrated sulfuric acid at room temperature for 60 hours reaction time. The degree sulfonation (DS) of the SPEEK are 58% was determined by H1 NMR using area under the peak of the hydrogen shielding at aromatic ring of the SPEEK. Then, the functional group of the SPEEK was determined using Fourier transfer infrared (FTIR) showed O-H vibration at 3433 cm-1 of the sulfonated group (SO2-OH). The effect of the solvent and polymer concentration toward the electrospinning process was investigated which, the DMAc has electrospun ability compared to the DMSO. While, at 20 wt.% of the polymer concentration able to form a fine and uniform nanofiber, this was confirmed by FESEM that shown electrospun fiber mat SPEEK surface at nano scale diameter.

  10. Review of glycol ether and glycol ether ester solvents used in the coating industry.

    PubMed Central

    Smith, R L

    1984-01-01

    Ethylene oxide-based glycol ether and glycol ether ester solvents have been used in the coatings industry for the past fifty years. Because of their excellent performance properties (evaporation rate, blush resistance, flow-out and leveling properties, solubility for coating resins, solvent activity, mild odor, good coupling ability, good solvent release) a complete line of ethylene oxide-based solvents of various molecular weights has been developed. These glycol ether and glycol ether ester solvents have better solvent activity for coating resin than ester or ketone solvents in their evaporation rate range. The gloss, flow and leveling, and general performance properties of many coating systems are dependent on the use of these products in the coating formula. Because of the concern about the toxicity of certain ethylene oxide-based solvents, other products are being evaluated as replacements in coating formulas. PMID:6499793

  11. Distribution of ether in two postmortem cases.

    PubMed

    Cox, Dawn; DeRienz, Rebecca; Jufer Phipps, Rebecca A; Levine, Barry; Jacobs, Aaron; Fowler, David

    2006-10-01

    Diethyl ether (ether) is a volatile liquid that was used in the 1800s as an anesthetic agent; however, it is no longer used for this purpose, partly because of its odor and flammability. Two postmortem cases in which ether was detected are presented. The first case was an 18-year-old male found hanging from a basement ceiling brace in a semi-sitting position with a gas mask covering his face. A container of Prestone starting fluid and a bong were found on the floor close to the body. The second case was a 20-year-old male found unresponsive in his dormitory room with two black plastic trash bags secured over his head. Two saturated rags and a resealable bag containing a clear liquid were contained within these trash bags. An almost empty can of Tradco starting fluid was also found at the scene. Ether concentrations were determined by headspace gas chromatography-mass spectrometry in the selective ion monitoring mode. In case #1, the medical examiner ruled that the cause of death was asphyxia due to hanging; the manner of death was undetermined. In case #2, the medical examiner ruled that the cause of death was asphyxia and the manner of death was suicide. PMID:17132265

  12. POLYBROMINATED DIPHENYL ETHERS IN SOUTHERN MISSISSIPPI CATFISH

    EPA Science Inventory

    Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in a wide variety of consumer products. Concerns surrounding these compounds are primarily due do their ubiquitous presence in the environment as well as in human tissue, such as milk, coupled with evidence indi...

  13. Elastic electron scattering by ethyl vinyl ether

    SciTech Connect

    Khakoo, M. A.; Hong, L.; Kim, B.; Winstead, C.; McKoy, V.

    2010-02-15

    We report measured and calculated results for elastic scattering of low-energy electrons by ethyl vinyl ether (ethoxyethene), a prototype system for studying indirect dissociative attachment processes that may play a role in DNA damage. The integral cross section displays the expected {pi}{sup *} shape resonance. The agreement between the calculated and measured cross sections is generally good.

  14. The introduction of ether in Paris revisited.

    PubMed

    Defalque, Ray J; Wright, A J

    2008-04-01

    Modern accounts of the introduction of ether anesthesia in France are mainly based on a letter written in February 1947 to the editor of the Boston Medical and Surgical Journal by Francis Willis Fisher, a young Boston surgeon at that time a student in Paris. Fisher's letter hints that his efforts were the main impetus to the acceptance of ether by the French academic surgeons. The authors have reviewed the contemporary medical literature, especially the numerous French journals, relative to that event. Their review suggests that Fisher was largely ignored by the French surgeons and by his young competitors then studying in Paris. He seems to have exaggerated his role in the acceptance of ether anesthesia in France. The reviewed literature also provides some additional details and some corrections to Fisher's account. Modern accounts of the introduction of ether in France have relied heavily on a letter sent in February 1847 to the editor of the Boston Medical & Surgical Journal by Francis W. Fisher, a young Boston physician then studying in Paris. Fisher's report is often vague, occasionally incorrect, and probably exaggerates his role in the acceptance of anesthesia in Paris. This review attempts to complement and correct Fisher's account. PMID:20506770

  15. "Crown Ether" Synthesis: An Organic Laboratory Experiment.

    ERIC Educational Resources Information Center

    Field, Kurt W.; And Others

    1979-01-01

    This experiment is designed to acquaint the student with a macromolecular synthesis of a crown ether type compound. The starting materials are readily available and the product, a cyclic polyether, belongs to a class of compounds that has aroused the interest of chemist and biologist alike. (Author/BB)

  16. Bis(2-chloro-1-methylethyl) ether

    Integrated Risk Information System (IRIS)

    Bis ( 2 - chloro - 1 - methylethyl ) ether ; CASRN 108 - 60 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assess

  17. Methyl tert-butyl ether (MTBE)

    Integrated Risk Information System (IRIS)

    Methyl tert - butyl ether ( MTBE ) ; CASRN 1634 - 04 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments f

  18. Ethylene glycol monobutyl ether (EGBE) (2-Butoxyethanol)

    Integrated Risk Information System (IRIS)

    Ethylene glycol monobutyl ether ( EGBE ) ( 2 - Butoxyethanol ) ; CASRN 111 - 76 - 2 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I (

  19. Biomonitoring Polybrominated Diphenyl Ethers in Lactating Women

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Breast milk is a valuable biological specimen for biomonitoring lipid-soluble polybrominated diphenyl ethers (PBDEs). The goal of this project was to determine the levels of PBDEs in breast milk of lactating women from the Seacoast region of New Hampshire and to examine potential relationships betw...

  20. Dimensionally Stable Ether-Containing Polyimide Copolymers

    NASA Technical Reports Server (NTRS)

    Fay, Catharine C. (Inventor); St.Clair, Anne K. (Inventor)

    1999-01-01

    Novel polyimide copolymers containing ether linkages were prepared by the reaction of an equimolar amount of dianhydride and a combination of diamines. The polyimide copolymers described herein possess the unique features of low moisture uptake, dimensional stability, good mechanical properties, and moderate glass transition temperatures. These materials have potential application as encapsulants and interlayer dielectrics.

  1. Imide/arylene ether block copolymers

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

    1991-01-01

    Two series of imide/arylene either block copolymers were prepared using an arylene ether block and either an amorphous or semi-crystalline imide block. The resulting copolymers were characterized and selected physical and mechanical properties were determined. These results, as well as comparisons to the homopolymer properties, are discussed.

  2. Polyimides Containing Carbonyl and Ether Connecting Groups

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M.; Havens, Stephen J.

    1987-01-01

    Semicrystallinity gives rise to tough, solvent-resistant polymers. New polyimides prepared from reaction of aromatic dianhydrides with new diamines containing carbonyl and ether connecting groups between aromatic rings. Damines prepared from reaction of 4-aminophenol with activated aromatic difluoro compounds in presence of potassium carbonate. These types of polymers have potential applications in molded products, films, adhesives, and composites.

  3. Process for making propenyl ethers and photopolymerizable compositions containing them

    DOEpatents

    Crivello, James V.

    1996-01-01

    Propenyl ether monomers of formula V A(OCH.dbd.CHCH.sub.3).sub.n wherein n is an integer from one to six and A is selected from cyclic ethers, polyether and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  4. Process for making propenyl ethers and photopolymerizable compositions containing them

    DOEpatents

    Crivello, J.V.

    1996-01-23

    Propenyl ether monomers of formula A(OCH{double_bond}CHCH{sub 3}){sub n} (V) wherein n is an integer from one to six and A is selected from cyclic ethers, polyether, and alkanes are disclosed. The monomers are readily polymerized in the presence of cationic photoinitiators, when exposed to actinic radiation, to form poly(propenyl ethers) that are useful for coatings, sealants, varnishes and adhesives. Compositions for preparing polymeric coatings comprising the compounds of formula V together with particular cationic photoinitiators are also disclosed, as are processes for making the monomers from allyl halides and readily available alcohols. The process involves rearranging the resulting allyl ethers to propenyl ethers.

  5. Certain glycol ethers eliminated from toxic chemical release reporting requirements

    SciTech Connect

    1994-09-01

    Effective June 28, 1994, the U.S. Environmental Protection Agency (EPA) eliminated high molecular weight glycol ethers from the reporting requirements of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA). EPCRA (42 U.S.C. 11023) is also referred to as Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986. EPA redefined the glycol ethers category list of chemicals subject to reporting based on an EPA review of available human health data on short-chain glycol ethers. EPA is removing only the surfactant glycol ethers, which are high molecular weight glycol ethers, i.e., those with pendant alkyl groups and that typically have eight or more carbon atoms. The redefinition retains certain glycol ethers (i.e., ethylene glycol ethers where there are 1,2, or 3 repeating ethylene oxide groups) in the category. These are reasonably anticipated to cause adverse human health effects.

  6. Chemistry of enol ethers. LXXXVIII. Condensation of the tetraethylacetal of malonaldehyde with /beta/-substituted enol alkyl ethers

    SciTech Connect

    Makin, S.M.; Kruglikova, R.I.; Kharitonova, O.V.; Arshava, B.M.

    1988-03-10

    The action of /beta/-substituted enol ethers on the tetraethylacetal of malonaldehyde gave the acetals of 1,5- and 1,7-dialdehydes. The nature of the substituent in the enol ether was found to affect the regioselectivity of the reaction: condensation with ethers containing an electron-withdrawing substituent leads to 1,5-dialdehyde acetals, while condensation with ethers containing a strong electron-donor substituent leads to 1,7-dialdehyde acetals. The condensation of malonaldehyde tetraethylacetal with /beta/-substituted enol alkyl ethers was carried out at room temperature in the presence of zinc chloride as catalyst.

  7. Ether bridge formation in loline alkaloid biosynthesis

    PubMed Central

    Pan, Juan; Bhardwaj, Minakshi; Faulkner, Jerome R.; Nagabhyru, Padmaja; Charlton, Nikki D.; Higashi, Richard M.; Miller, Anne-Frances; Young, Carolyn A.; Grossman, Robert B.; Schardl, Christopher L.

    2014-01-01

    Lolines are potent insecticidal agents produced by endophytic fungi of cool-season grasses. These alkaloids are composed of a pyrrolizidine ring system and an uncommon ether bridge linking carbons 2 and 7. Previous results indicated that 1-aminopyrrolizidine was a pathway intermediate. We used RNA interference to knock down expression of lolO, resulting in the accumulation of a novel alkaloid identified as exo-1-acetamidopyrrolizidine based on high-resolution MS and NMR. Genomes of endophytes differing in alkaloid profiles were sequenced, revealing that those with mutated lolO accumulated exo-1-acetamidopyrrolizidine but no lolines. Heterologous expression of wild-type lolO complemented a lolO mutant, resulting in the production of N-acetylnorloline. These results indicated that the non-heme iron oxygenase, LolO, is required for ether bridge formation, probably through oxidation of exo-1-acetamidopyrrolizidine. PMID:24374065

  8. Cyclic ethers adsorbed on Ru(001)

    NASA Astrophysics Data System (ADS)

    Walczak, M. M.; Thiel, P. A.

    1990-11-01

    The three cyclic ethers 1,3-dioxane. 1,4-dioxane and 1,3,5-trioxane all exhibit multiple desorption states from Ru(001) between 200 and 310 K, in addition to the multilayer and metastable states at lower temperature. Most distinctive are the two low-temperature α-states. which are similar in shape, position, and relative population for all three compounds. This suggests that these states are associated with configurations which are accessible to all three molecules. The data also indicate that there is some molecular decomposition to gaseous CO and H 2. 1,4-Dioxane yields the largest amounts of these decomposition products, suggesting that this molecule is most susceptible to surface-catalyzed decomposition. The desorption data for the three cyclic ethers are grossly similar to each other, and also to the straight-chain diethers which we have previously studied.

  9. Synthesis of new liquid crystalline diglycidyl ethers.

    PubMed

    Mohammed, Issam Ahmed; Hamidi, Rashidah Mohamed

    2012-01-01

    The phenolic Schiff bases I-VI were synthesized by condensation reactions between various diamines, namely o-dianisidine, o-tolidine and ethylenediamine with vanillin or p-hydroxybenzaldehyde and subsequent reactions between these phenolic Schiff bases and epichlorohydrin to produce new diglycidyl ethers Ia-VIa. The structures of these compounds were confirmed by CHN, FT-IR, (1)H-NMR, and (13)C-NMR spectroscopy. Their thermotropic liquid crystalline behavior was studied using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). All the diglycidyl ethers prepared exhibit nematic mesophases, except for Va and VIa, which did not show any transition mesophases, but simply flow to liquids. PMID:22233565

  10. Poly(Arylene Ether Imidazole) Surface Films

    NASA Technical Reports Server (NTRS)

    Connell, John W.; Towell, Timothy W.; Tompkins, Stephen S.

    1993-01-01

    Films adhere well to some substrates, provide smooth surfaces, and facilitate release from molds. Thin films of thermoplastic poly(arylene ether imidazole)s (PAEI's) particularly suitable for use as surface modifiers for graphite/epoxy or graphite/bismaleimide composite panels. Molecule of PAEI includes imidazole groups along its backbone that co-cure with epoxies or bismaleimides during processing. Films thermally stable and resistant to bombardment by energetic electrons.

  11. Nikola Tesla, the Ether and his Telautomaton

    NASA Astrophysics Data System (ADS)

    Milar, Kendall

    2014-03-01

    In the nineteenth century physicists' understanding of the ether changed dramatically. New developments in thermodynamics, energy physics, and electricity and magnetism dictated new properties of the ether. These have traditionally been examined from the perspective of the scientists re-conceptualizing the ether. However Nikola Tesla, a prolific inventor and writer, presents a different picture of nineteenth century physics. Alongside the displays that showcased his inventions he presented alternative interpretations of physical, physiological and even psychical research. This is particularly evident in his telautomaton, a radio remote controlled boat. This invention and Tesla's descriptions of it showcase some of his novel interpretations of physical theories. He offered a perspective on nineteenth century physics that focused on practical application instead of experiment. Sometimes the understanding of physical theories that Tesla reached was counterproductive to his own inventive work; other times he offered new insights. Tesla's utilitarian interpretation of physical theories suggests a more scientifically curious and invested inventor than previously described and a connection between the scientific and inventive communities.

  12. Biodegradation of glycol ethers in soil

    SciTech Connect

    Gonsior, S.J.; West, R.J.

    1995-08-01

    Because of the widespread use of glycol ethers in applications ranging from consumer products to use as chemical intermediates, there is a need to better understand the fate of these compounds in the environment. Soil biodegradation studies were conducted for three propylene glycol ethers: 1-methoxy-2-propanol, 1-phenoxy-2-propanol, and 1-methoxy-2-propanol acetate. The test compounds were labeled with carbon-14 at either the methoxy or phenoxy substituents. Biodegradation of the three compounds was observed in two sandy loam soils. The time required for disappearance of 50% of the test compounds ranged from < 1 d at 0.2 ppm (w/w) to <7 d at 107 ppm. Degradation rates were slower in a sandy soil, reflecting the lower concentration of microorganisms present. No significant accumulation of intermediate products was observed, and ultimate yields of {sup 14}CO{sub 2} were in the range of 40 to 65% of the initial concentration. Results indicated that the glycol ethers were degraded in a variety of soils under aerobic conditions.

  13. Chemistry and adhesive properties of poly(arylene ether)s containing heterocyclic units

    NASA Technical Reports Server (NTRS)

    Connell, John W.

    1991-01-01

    Novel poly(arylene ether)s containing heterocyclic units were prepared, characterized, and evaluated as adhesives and composite matrices. The polymers were prepared by reacting a heterocyclic bisphenol with an activated aromatic dihalide in a polar aprotic solvent, using potassium carbonate. The polymerizations were generally carried out in N,N-dimethylacetamide at 155 C. In some cases, where the polymers were semicrystalline, higher temperatures and thus higher boiling solvents were necessary to keep the polymers in solution. Heterocyclic rings incorporated into the poly(arylene ether) backbone include phenylquinoxaline, phenylimidazole, benzimidazole, benzoxazole, 1,3,4-oxadiazole, and 1,2,4-triazole. The polymers were characterized by differential scanning calorimetry, solution viscosity, X-ray diffraction, thin film, and adhesive and (in some cases) composite properties. The glass transition temperatures, crystalline melt temperature, solubility, and mechanical properties varied depending upon the heterocyclic ring. The chemistry and properties of these materials are discussed.

  14. Azidated Ether-Butadiene-Ether Block Copolymers as Binders for Solid Propellants

    NASA Astrophysics Data System (ADS)

    Cappello, Miriam; Lamia, Pietro; Mura, Claudio; Polacco, Giovanni; Filippi, Sara

    2016-07-01

    Polymeric binders for solid propellants are usually based on hydroxyl-terminated polybutadiene (HTPB), which does not contribute to the overall energy output. Azidic polyethers represent an interesting alternative but may have poorer mechanical properties. Polybutadiene-polyether copolymers may combine the advantages of both. Four different ether-butadiene-ether triblock copolymers were prepared and azidated starting from halogenated and/or tosylated monomers using HTPB as initiator. The presence of the butadiene block complicates the azidation step and reduces the storage stability of the azidic polymer. Nevertheless, the procedure allows modifying the binder properties by varying the type and lengths of the energetic blocks.

  15. Development of quantitative structure property relationships for poly(arylene ether)s.

    PubMed

    Hamerton, I; Howlin, B J; Larwood, V

    1995-02-01

    The technique of quantitative structure-activity relationships (QSAR) is well accepted by the drug design community. The analogous technique of quantitative structure-property relationships (QSPR) has applications in the field of polymer chemistry. A variety of molecular modeling and molecular orbital techniques was used to find molecular descriptors that could be used to derive an empirical equation to describe the glass transition temperature of two related classes of poly(arylene ether)s. The derived equation was then used to predict the thermal characteristics of another polymer of the same type. PMID:7794828

  16. Electroless nickel-phosphorus coating on poly (ether ether ketone)/carbon nanotubes composite

    NASA Astrophysics Data System (ADS)

    Zhai, Tong; Di, Lizhi; Yang, De'an

    2014-05-01

    In order to improve electromagnetic shielding property of poly (ether ether ketone)/carbon nanotubes composite, a nickel-phosphorus coating was covered on the composite by electroless plating. The morphologies of the substrates and the coatings were characterized by SEM. XPS was performed to analyze the surface composition and chemical states before and after chemical etching. The results showed that lots of microscopic holes appeared and evenly distributed on the surface, and the concentration of hydrophilic groups on the surface increased after the composite was etched. Thermal shock test showed that the adhesive strength between the coating and the composite was good.

  17. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  18. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  19. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  20. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  1. 40 CFR 721.10067 - Ether amine phosphonate salt (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Ether amine phosphonate salt (generic... Specific Chemical Substances § 721.10067 Ether amine phosphonate salt (generic). (a) Chemical substances... ether amine phosphonate salt (PMNs P-05-57, P-05-58, P-05-59, P-05-61, P-05-62, P-05-63, P-05-64, and...

  2. Divinyl ether synthase gene and protein, and uses thereof

    DOEpatents

    Howe, Gregg A.; Itoh, Aya

    2011-09-13

    The present invention relates to divinyl ether synthase genes, proteins, and methods of their use. The present invention encompasses both native and recombinant wild-type forms of the synthase, as well as mutants and variant forms, some of which possess altered characteristics relative to the wild-type synthase. The present invention also relates to methods of using divinyl ether synthase genes and proteins, including in their expression in transgenic organisms and in the production of divinyl ether fatty acids, and to methods of suing divinyl ether fatty acids, including in the protection of plants from pathogens.

  3. Divinyl ether synthase gene, and protein and uses thereof

    DOEpatents

    Howe, Gregg A.; Itoh, Aya

    2006-12-26

    The present invention relates to divinyl ether synthase genes, proteins, and methods of their use. The present invention encompasses both native and recombinant wild-type forms of the synthase, as well as mutants and variant forms, some of which possess altered characteristics relative to the wild-type synthase. The present invention also relates to methods of using divinyl ether synthase genes and proteins, including in their expression in transgenic organisms and in the production of divinyl ether fatty acids, and to methods of suing divinyl ether fatty acids, including in the protection of plants from pathogens.

  4. Functionalized poly(arylene ethers) as toughness modifiers for bismaleimides

    NASA Technical Reports Server (NTRS)

    Stenzenberger, H. D.; Roemer, W.; Hergenrother, P. M.; Jensen, B.; Breitigam, W.

    1990-01-01

    A family of novel, low molecular weight functionalized poly(arylene ether) resins has been investigated to ascertain its members' toughness-imparting contribution to neat bismaleimide (BMI) resin and BMI-matrix laminate composite properties. Attention is given to the contribution of the reactive poly(arylene ether)'s backbone chemistry to fracture toughness, as well as to the comparative influence of high and low molecular weight reactive poly(arylene ether) types on the modified BMI resin systems. The modified BMIs possess a polyphase morphology, with good adhesion between the thermoplastic nodules and the host thermoset systems.

  5. Antioxidant activity of alkyl hydroxytyrosyl ethers in unsaturated lipids.

    PubMed

    Cert, Rosa; Madrona, Andrés; Espartero, José Luis; Pérez-Camino, M Carmen

    2015-06-01

    The antioxidant activity of ethyl and octyl hydroxytyrosyl ethers toward lipids was determined using the Rancimat and open cup methods at high temperatures and 50 °C, respectively. The effect of the unsaturation of the matrix was evaluated using sunflower, soya, and fish refined oils. The antioxidant activities of alkyl hydroxytyrosyl ethers (HTy ethers), hydroxytyrosyl esters, and free hydroxytyrosol are similar, and are much higher than that of α-tocopherol at the same millimolar concentration. The relationship between the induction period and the concentration of the HTy ethers is a sigmoidal curve; an accurate concentration of HTy ethers is necessary to achieve maximum activity, as it increases with the level of matrix unsaturation. The presence of tocopherols in commercial oils affects the antioxidant effect of HTy ethers. Thus, the addition of a low concentration of HTy ethers results in a positive effect, whereas the effect of the addition of high amounts of ethers is slightly less than that of the phenol alone. The addition of HTy ethers to commercial refined oils increases the stability of the oils and preserves tocopherols and polyunsaturated fatty acids from oxidation, enabling the oils to maintain their nutritional properties for longer periods of time. PMID:26018773

  6. Ether Cleavage Re-Investigated: Elucidating the Mechanism of BBr3-Facilitated Demethylation of Aryl Methyl Ethers

    PubMed Central

    Kosak, Talon M; Conrad, Heidi A; Korich, Andrew L; Lord, Richard L

    2015-01-01

    One of the most well-known, highly utilized reagents for ether cleavage is boron tribromide (BBr3), and this reagent is frequently employed in a 1:1 stoichiometric ratio with ethers. Density functional theory calculations predict a new mechanistic pathway involving charged intermediates for ether cleavage in aryl methyl ethers. Moreover, these calculations predict that one equivalent of BBr3 can cleave up to three equivalents of anisole, producing triphenoxyborane [B(OPh)3] prior to hydrolysis. These predictions were validated by gas chromatography analysis of reactions where the BBr3:anisole ratio was varied. Not only do we confirm that sub-stoichiometric equivalents may be used for ether demethylation, but the findings also support our newly proposed three cycle mechanism for cleavage of aryl methyl ethers. PMID:26693209

  7. Novel high T{sub g} high-strength poly(aryl ether)s

    SciTech Connect

    Banerjee, S.; Maier, G.

    1999-08-01

    A novel 2-perfluoroalkyl-activated bisfluoro monomer has been synthesized successfully using a Pd(0)-catalyzed cross-coupling reaction of 4-fluoro-3-trifluoromethyl phenyl boronic acid with 4,4{prime}-dibromodiphenylbenzene. This monomer was converted to novel poly(aryl ether)s by nucleophilic displacement of the fluorine atoms on the benzene ring with several bisphenols. The products obtained by displacement of the fluorine atoms exhibit weight average molar masses up to 1.06 {times} 10{sup 5} g/mol in GPC. These poly(aryl ether)s showed outstanding thermooxidative stability up to 534 C for 5% weight loss in TGA under synthetic air and high glass transition temperatures (T{sub g}) even up to 300 C in DSC and DMTA. These polymers are soluble in a wide range of organic solvents, e.g., CHCl{sub 3}, THF, NMP, DMF, toluene, etc., and are insoluble in DMSO and acetone. Transparent thin films of these polymers cast from DMF exhibited tensile strengths up to 115 MPa, moduli up to 2.59 GPa, and elongations up to 120% depending on their exact repeating unit structures. These values are comparable to those of high performance thermoplastic materials such as PEEK or Ultem PEI.

  8. Novel high T[sub g] high-strength poly(aryl ether)s

    SciTech Connect

    Banerjee, S.; Maier, G. . Lehrstuhl fuer Makromolekulare Stoffe)

    1999-08-01

    A novel 2-perfluoroalkyl-activated bisfluoro monomer has been synthesized successfully using a Pd(0)-catalyzed cross-coupling reaction of 4-fluoro-3-trifluoromethyl phenyl boronic acid with 4,4[prime]-dibromodiphenylbenzene. This monomer was converted to novel poly(aryl ether)s by nucleophilic displacement of the fluorine atoms on the benzene ring with several bisphenols. The products obtained by displacement of the fluorine atoms exhibit weight average molar masses up to 1.06 [times] 10[sup 5] g/mol in GPC. These poly(aryl ether)s showed outstanding thermooxidative stability up to 534 C for 5% weight loss in TGA under synthetic air and high glass transition temperatures (T[sub g]) even up to 300 C in DSC and DMTA. These polymers are soluble in a wide range of organic solvents, e.g., CHCl[sub 3], THF, NMP, DMF, toluene, etc., and are insoluble in DMSO and acetone. Transparent thin films of these polymers cast from DMF exhibited tensile strengths up to 115 MPa, moduli up to 2.59 GPa, and elongations up to 120% depending on their exact repeating unit structures. These values are comparable to those of high performance thermoplastic materials such as PEEK or Ultem PEI.

  9. Unprecedented reactions: from epichlorohydrin to epoxyglycidyl substituted divinyl ether and its conversion into epoxyglycidyl propargyl ether

    PubMed Central

    Yao, Yiwu; Li, Zheng; Qiu, Yatao; Bai, Jinhong; Su, Jinyue; Zhang, Dayong; Jiang, Sheng

    2015-01-01

    The reaction of epichlorohydrin with concentrated sodium hydroxide in hexane under phase transfer conditions has surprisingly led to the formation of the symmetrical di(3-epoxyglycidyl-1-propenyl) ether 1 which contains both nucleophilic and electrophilic moieties. When it was reacted with n-butyllithium, intermediate 1 once again surprisingly generated epoxyglycidyl propargyl ether, which was further reacted in situ with a variety of benzaldehydes to furnish the corresponding substituted propargylic alcohols in good yields. While the reaction is operationally simple, it provides a powerful method for the synthesis of the important products from commodity materials such as epichlorohydrin. Moreover, these reactions may have revealed that some fundamental properties of the hydroxide anion in those once thought straightforward reactions are not well understood. A careful analysis of the experimental data suggests that an unprecedented concerted elimination of the epoxyglycidyl ether with sodium hydroxide may be operative and an alpha deprotonation followed by alpha elimination of the di(3-epoxyglycidyl-1-propenyl) ether with alkyllithium may have been involved. PMID:26383123

  10. Brominated-chlorinated diphenyl ethers formed by thermolysis of polybrominated diphenyl ethers at low temperatures.

    PubMed

    Rupp, Silke; Metzger, Jörg W

    2005-09-01

    Polybrominated diphenyl ethers (PBDEs) are a group of brominated flame retardants (BFRs) used mainly as additives in different kinds of plastic material. Various PBDEs are found in all environmental compartments as well as in tissue and blood serum of animals and humans due to their persistence and tendency to bioaccumulate. Emission of PBDEs into the environment can occur during recycling of PBDE-containing plastic material or during their uncontrolled or insufficient combustion as e.g. in accidental fires or landfill fires. Under these circumstances, PBDEs can also function as precursor molecules for the formation of polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). In this study, we qualitatively investigated the reaction of two PBDE congeners, 2,2',4,4'-tetrabromo diphenyl ether (BDE 47) and 2,2',4,4',5,5'-hexabromo diphenyl ether (BDE 153), as well as hexabromobenzene (HBB), a flame retardant used in the past, when exposed to temperatures between 250 degrees C and 500 degrees C. The formed reaction products were analysed by high resolution gas chromatography-low resolution mass spectrometry (HRGC-LRMS). Among others brominated-chlorinated diphenyl ethers were formed by chlorodebromination of the PBDEs. In addition, thermolysis of BDE 47 and BDE 153 in the presence of tetrachloromethane as model substance for an organic chlorine source was studied. Thermal treatment of HBB resulted in the formation of brominated-chlorinated benzenes. PMID:16083771

  11. Unprecedented reactions: from epichlorohydrin to epoxyglycidyl substituted divinyl ether and its conversion into epoxyglycidyl propargyl ether

    NASA Astrophysics Data System (ADS)

    Yao, Yiwu; Li, Zheng; Qiu, Yatao; Bai, Jinhong; Su, Jinyue; Zhang, Dayong; Jiang, Sheng

    2015-09-01

    The reaction of epichlorohydrin with concentrated sodium hydroxide in hexane under phase transfer conditions has surprisingly led to the formation of the symmetrical di(3-epoxyglycidyl-1-propenyl) ether 1 which contains both nucleophilic and electrophilic moieties. When it was reacted with n-butyllithium, intermediate 1 once again surprisingly generated epoxyglycidyl propargyl ether, which was further reacted in situ with a variety of benzaldehydes to furnish the corresponding substituted propargylic alcohols in good yields. While the reaction is operationally simple, it provides a powerful method for the synthesis of the important products from commodity materials such as epichlorohydrin. Moreover, these reactions may have revealed that some fundamental properties of the hydroxide anion in those once thought straightforward reactions are not well understood. A careful analysis of the experimental data suggests that an unprecedented concerted elimination of the epoxyglycidyl ether with sodium hydroxide may be operative and an alpha deprotonation followed by alpha elimination of the di(3-epoxyglycidyl-1-propenyl) ether with alkyllithium may have been involved.

  12. Production of durene from alcohols and ethers

    SciTech Connect

    Fowles, P. E.; Yan, T. Y.

    1985-06-18

    Durene is recovered from a mixture rich in durene and containing hydrocarbons boiling in the gasoline range by cooling the mixture to a point where crystallization occurs and separating the crystallized durene. The durene subsequently is washed with a wash fluid. The wash fluid which can be methanol, is returned to a process wherein it is converted to gasoline and durene. The separated mother liquor is added to the gasoline fraction. The original mixture of durene and gasoline is obtained by the catalytic conversion of alcohols and ethers.

  13. Obstetric and Other Uses of Ether Before Ether Day, According to the Boston Medical and Surgical Journal of 1828-1846.

    PubMed

    Stoller, Sundrayah N; Minehart, Rebecca D; Alston, Theodore A

    2016-04-01

    From the inception of the Boston Medical and Surgical Journal in 1828 until the prominent public demonstration of surgical anesthesia on Ether Day of 1846, ether was often mentioned in the journal. Many of the examples were related to obstetrics. Because molecular structures were not available in the early 1800s, diverse volatile liquids were termed ethers. In addition to sulphuric ether, so-called ethers included cyanide-releasing propionitrile and ethanolic solutions of chloroform and of the potent vasodilator ethyl nitrite. Familiarity with anesthetically unsuitable ethers may have long deterred consideration of inhaled sulphuric ether for analgesia and anesthesia. PMID:27080505

  14. IRIS Toxicological Review of Decabromodiphenyl Ether (2008 Final)

    EPA Science Inventory

    EPA is announcing the release of the final report, Toxicological Review of Decabromodiphenyl Ether: in support of the Integrated Risk Information System (IRIS). The updated Summary for Decabromodiphenyl Ether and accompanying Quickview have also been added to the IRIS Data...

  15. HPLC and TLC characterisation of ecdysteroid alkyl ethers.

    PubMed

    Lapenna, Silvia; Dinan, Laurence

    2009-10-01

    Semi-synthetic ecdysteroid alkyl ethers have increased potential over natural ecdysteroids as actuators of ligand-inducible gene-expression systems based on the ecdysteroid receptor for in vivo applications. However, a scalable synthesis of these compounds has yet to be developed. We report a set of reversed-phase (RP; C(18) and C(6)) and normal-phase (NP; diol) HPLC systems which can be used to analyse and separate ecdysteroid ethers with single or multiple O-methyl substitutions at the 2alpha-, 3beta-, 14alpha-, 22- and 25-positions. The elution order of methyl ether analogues of the prototypical ecdysteroid 20-hydroxyecdysone (20E) was 3-methyl<2-methyl<14-methyl<25-methyl<22-methyl with both C(18)- and C(6)-RP-HPLC, when eluted with methanol/water mixtures. Further, the elution order of 20E 22-O-alkyl ethers was methylethers can also be adequately resolved by NP-HPLC and silica HPTLC. On the latter, detection of ecdysteroid O-alkyl ethers with the p-anisaldehyde/sulphuric acid reagent distinguishes 22-O-alkyl ethers from non-22-O-alkyl ether analogues by the colour of the resulting spot. PMID:19648067

  16. 48. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    48. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, 5TH LEVEL, LOOKING NORTH AT ETHER AND ALCOHOL CONDENSERS AT TOP OF TOWER. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  17. Process for producing dimethyl ether from synthesis gas

    DOEpatents

    Pierantozzi, R.

    1985-06-04

    This invention pertains to a Fischer Tropsch process for converting synthesis gas to an oxygenated hydrocarbon with particular emphasis on dimethyl ether. Synthesis gas comprising carbon monoxide and hydrogen are converted to dimethyl ether by carrying out the reaction in the presence of an alkali metal-manganese-iron carbonyl cluster incorporated onto a zirconia-alumina support.

  18. 29 CFR 1926.1108 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false bis-Chloromethyl ether. 1926.1108 Section 1926.1108 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...-Chloromethyl ether. Note: The requirements applicable to construction work under this section are identical...

  19. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  20. 29 CFR 1915.1008 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false bis-Chloromethyl ether. 1915.1008 Section 1915.1008 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1008 bis-Chloromethyl ether. Note: The requirements applicable to shipyard employment under...

  1. 40 CFR 721.3485 - Hydrofluorocarbon alkyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Hydrofluorocarbon alkyl ether. 721... Substances § 721.3485 Hydrofluorocarbon alkyl ether. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a hydrofluorocarbon alkyl...

  2. 29 CFR 1926.1106 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Methyl chloromethyl ether. 1926.1106 Section 1926.1106 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... § 1926.1106 Methyl chloromethyl ether. Note: The requirements applicable to construction work under...

  3. 29 CFR 1915.1006 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Methyl chloromethyl ether. 1915.1006 Section 1915.1006 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Hazardous Substances § 1915.1006 Methyl chloromethyl ether. Note: The requirements applicable to...

  4. 29 CFR 1926.1108 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false bis-Chloromethyl ether. 1926.1108 Section 1926.1108 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...-Chloromethyl ether. Note: The requirements applicable to construction work under this section are identical...

  5. 40 CFR 721.825 - Certain aromatic ether diamines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Certain aromatic ether diamines. 721.825 Section 721.825 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... Substances § 721.825 Certain aromatic ether diamines. (a) Chemical substances and significant new...

  6. 29 CFR 1926.1106 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Methyl chloromethyl ether. 1926.1106 Section 1926.1106 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... § 1926.1106 Methyl chloromethyl ether. Note: The requirements applicable to construction work under...

  7. 46. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, CONTROL PANEL LEVEL (2ND DECK) OF ETHER AND ALCOHOL STILL BUILDING, LOOKING NORTH, SHOWING TWO ALCOHOL DISTILLATION TOWERS BEHIND 'MIXED SOLVENT UNIT' CONTROL PANEL. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  8. 47. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    47. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, 4TH LEVEL, LOOKING NORTH AT TOPS OF ALCOHOL AND ETHER DISTILLATION TOWERS. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  9. Preparation of highly fluorinated diols containing ether linkages.

    NASA Technical Reports Server (NTRS)

    Rochow, S. E.; Stump, E. C., Jr.

    1970-01-01

    Hydroxy-terminated perfluoroethers and polyurethane resins derived from ethers have outstanding chemical resistance and good thermal properties. They can be used as potting compounds, coatings, and seals. The hydroxy-terminated ethers serve as intermediates in the synthesis of highly fluorinated elastomers and adhesives.

  10. 46 CFR 151.50-42 - Ethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Ethyl ether. 151.50-42 Section 151.50-42 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-42 Ethyl ether. (a)(1) Gravity...

  11. The Ether Wind and the Global Positioning System.

    ERIC Educational Resources Information Center

    Muller, Rainer

    2000-01-01

    Explains how students can perform a refutation of the ether theory using information from the Global Positioning System (GPS). Discusses the functioning of the GPS, qualitatively describes how position determination would be affected by an ether wind, and illustrates the pertinent ideas with a simple quantitative model. (WRM)

  12. Process for producing dimethyl ether form synthesis gas

    DOEpatents

    Pierantozzi, Ronald

    1985-01-01

    This invention pertains to a Fischer Tropsch process for converting synthesis gas to an oxygenated hydrocarbon with particular emphasis on dimethyl ether. Synthesis gas comprising carbon monoxide and hydrogen are converted to dimethyl ether by carrying out the reaction in the presence of an alkali metal-manganese-iron carbonyl cluster incorporated onto a zirconia-alumina support.

  13. Imide/arylene ether copolymers with pendent trifluoromethyl groups

    NASA Technical Reports Server (NTRS)

    Jensen, Brian J.; Havens, Stephen J.

    1992-01-01

    A series of imide/arylene ether block copolymers were prepared using an arylene ether block containing a hexafluoroisopropylidene group and an imide block containing a hexafluoroisopropylidene and a trifluoromethyl group in the polymer backbone. The copolymers were characterized and mechanical properties were determined and compared to the homopolymers.

  14. 21 CFR 520.1846 - Polyoxyethylene (23) lauryl ether blocks.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Polyoxyethylene (23) lauryl ether blocks. 520.1846 Section 520.1846 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.1846 Polyoxyethylene (23) lauryl ether blocks....

  15. Biosynthesis of archaeal membrane ether lipids

    PubMed Central

    Jain, Samta; Caforio, Antonella; Driessen, Arnold J. M.

    2014-01-01

    A vital function of the cell membrane in all living organism is to maintain the membrane permeability barrier and fluidity. The composition of the phospholipid bilayer is distinct in archaea when compared to bacteria and eukarya. In archaea, isoprenoid hydrocarbon side chains are linked via an ether bond to the sn-glycerol-1-phosphate backbone. In bacteria and eukarya on the other hand, fatty acid side chains are linked via an ester bond to the sn-glycerol-3-phosphate backbone. The polar head groups are globally shared in the three domains of life. The unique membrane lipids of archaea have been implicated not only in the survival and adaptation of the organisms to extreme environments but also to form the basis of the membrane composition of the last universal common ancestor (LUCA). In nature, a diverse range of archaeal lipids is found, the most common are the diether (or archaeol) and the tetraether (or caldarchaeol) lipids that form a monolayer. Variations in chain length, cyclization and other modifications lead to diversification of these lipids. The biosynthesis of these lipids is not yet well understood however progress in the last decade has led to a comprehensive understanding of the biosynthesis of archaeol. This review describes the current knowledge of the biosynthetic pathway of archaeal ether lipids; insights on the stability and robustness of archaeal lipid membranes; and evolutionary aspects of the lipid divide and the LUCA. It examines recent advances made in the field of pathway reconstruction in bacteria. PMID:25505460

  16. [Occupational lung cancer after inhalation of alkylating compounds: dichlordimethyl ether, monochlordimethyl ether and dimethyl sulphate (author's transl)].

    PubMed

    Bettendorf, U

    1977-03-18

    A 42-year-old chemist died from extensive pulmonary carcinoma, having inhaled for over seven years dichlordimethyl ether, monochlordimethyl ether and small amounts of dimethyl sulphate. This exposure took place in circumstances which, in animal experiments, have led to the development of cancer. A causal connection between the occupational exposure to these chemicals and carcinogenesis has to be accepted. PMID:844406

  17. Wear of ceramic-on-carbon fiber-reinforced poly-ether ether ketone hip replacements.

    PubMed

    Brockett, Claire L; John, Gemma; Williams, Sophie; Jin, Zhongmin; Isaac, Graham H; Fisher, John

    2012-08-01

    Total hip replacement has been a successful surgical intervention for over 50 years, with the majority of bearings using a polyethylene cup. Long-term failure due to osteolysis and loosening has been widely documented and alternative bearings have been sought. A novel carbon fiber-reinforced poly-ether ether ketone (CFR-PEEK) cup was investigated through experimental friction and wear studies. Friction studies demonstrated the bearings operated in a boundary lubrication condition, with friction factors higher than those for other hip replacement bearings. The wear study was conducted with 36 mm diameter bearings tested against Biolox Delta heads for a period of 10 million cycles. The mean volumetric wear rate was 0.3 mm(3)/Mc, indicating the ceramic-on-CFR-PEEK bearing to be a very low wearing option for total hip replacement. PMID:22454322

  18. The effect of high-energy electron radiation on poly(arylene ether)s

    NASA Technical Reports Server (NTRS)

    Connell, J. W.; Siochi, E. J.; Croall, C. I.

    1993-01-01

    Thin films of four experimental poly(arylene ether)s of similar chemical structure were exposed to 1 MeV electrons while under high vacuum. The films received total exposures of 5 x 10 exp 7 and 1 x 10 exp 9 rads at a dose rate of 5 x 10 exp 7 rads/h and a pressure of 2 x 10 exp -7 torr. Films exposed to 5 x 10 exp 7 rads showed dramatic changes in molecular weight distribution. After exposures of 1 x 10 exp 9 rads the films were only partially soluble in chloroform and exhibited no detectable changes in the glass transition temperatures. Thin-film tensile properties were also altered by the exposure to electron radiation. The effect of the exposures as determined by various analyses is discussed.

  19. A sulfonated poly (aryl ether ether ketone ketone) isomer: synthesis and DMFC performance

    SciTech Connect

    Kim, Yu Seung; Liu, Baijun; Hu, Wei; Jiang, Zhenhua; Robertson, Gilles; Guiver, Michael

    2009-01-01

    A sulfonated poly(aryl ether ether ketone ketone) (PEEKK) having a well-defined rigid homopolymer-like chemical structure was synthesized from a readily-prepared PEEKK post-sulfonation with concentrated sulfuric acid at room temperature within several hours. The polymer electrolyte membrane (PEM) cast from the resulting polymer exhibited an excellent combination of thermal resistance, oxidative and dimensional stability, low methanol fuel permeability and high proton conductivity. Furthermore, membrane electrode assemblies (MEAs) were successfully fabricated and good direct methanol fuel cell (DMFC) performance was observed. At 2 M MeOH feed, the current density at 0.5 V reached 165 mA/cm, which outperformed our reported analogues and eveluated Nafion membranes.

  20. [Recent development of research on the biotribology of carbon fiber reinforced poly ether ether ketone composites].

    PubMed

    Chen, Yan; Pan, Yusong

    2014-12-01

    Carbon fiber reinforced poly ether ether ketone (CF/PEEK) composite possesses excellent biocompatible, biomechanical and bioribological properties. It is one of the most promising implant materials for artificial joint. Many factors influence the bioribological properties of CF/PEEK composites. In this paper, the authors reviewed on the biotribology research progress of CF/PEEK composites. The influences of various factors such as lubricant, reinforcement surface modification, functional particles, friction counterpart and friction motion modes on the bio-tribological properties of CF/PEEK composites are discussed. Based on the recent research, the authors suggest that the further research should be focused on the synergistic effect of multiple factors on the wear and lubrication mechanism of CF/PEEK. PMID:25868268

  1. Sulfonated Poly(Ether-Ether-Ketone) Polymer Membranes for Fuel Cells

    NASA Astrophysics Data System (ADS)

    Hodakovska, J.; Kleperis, J.

    2008-01-01

    In the work, sulfonated poly(ether-ether-ketone) (SPEEK) ionomers were synthesized using an original (submitted for patent) and simple method. The resulting membranes were tested to determine parameters that are important for the use of this material in fuel cells (water absorption, sulfonation degree, conductivity, etc.). The thermo-gravimetric analysis has shown a good thermal stability in the range from RT to 200-220 °C, and two characteristic regions of weight loss - 7.4% at ~140 °C (reversible water loss) and 10.3% at 200-220 °C (due to polymer degradation when cross-linked polymer chains permanently break down and their SO3H-groups are lost). The conductivity values obtained by the through-plane measurements of SPEEK membranes were 12 mS/cm at RT and 23 mS/cm at 80 °C.

  2. Enhanced osteogenic activity of poly ether ether ketone using calcium plasma immersion ion implantation.

    PubMed

    Lu, Tao; Qian, Shi; Meng, Fanhao; Ning, Congqin; Liu, Xuanyong

    2016-06-01

    As a promising implantable material, poly ether ether ketone (PEEK) possesses similar elastic modulus to that of cortical bones yet suffers from bio-inertness and poor osteogenic properties, which limits its application as orthopedic implants. In this work, calcium is introduced onto PEEK surface using calcium plasma immersion ion implantation (Ca-PIII). The results obtained from scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirm the modified layer with varying contents of calcium are formed on PEEK surfaces. Water contact angle measurements reveal the increasing hydrophobicity of both Ca-PIII treated surfaces. In vitro cell adhesion, viability assay, alkaline phosphatase activity and collagen secretion analyses disclose improved the adhesion, proliferation, and osteo-differentiation of rat bone mesenchymal stem cells (bMSCs) on Ca-PIII treated surfaces. The obtained results indicate that PEEK surface with enhanced osteogenic activity can be produced by calcium incorporation. PMID:26954085

  3. Origin of mechanical modifications in poly (ether ether ketone)/carbon nanotube composite

    SciTech Connect

    Pavlenko, Ekaterina; Puech, Pascal; Bacsa, Wolfgang; Boyer, François; Olivier, Philippe; Sapelkin, Andrei; King, Stephen; Heenan, Richard; Pons, François; Gauthier, Bénédicte; Cadaux, Pierre-Henri

    2014-06-21

    Variations in the hardness of a poly (ether ether ketone) beam electrically modified with multi-walled carbon nanotubes (MWCNT, 0.5%-3%) are investigated. It is shown that both rupture and hardness variations correlate with the changes in carbon nanotube concentration when using micro indentation and extended Raman imaging. Statistical analysis of the relative spectral intensities in the Raman image is used to estimate local tube concentration and polymer crystallinity. We show that the histogram of the Raman D band across the image provides information about the amount of MWCNTs and the dispersion of MWCNTs in the composite. We speculate that we have observed a local modification of the ordering between pure and modified polymer. This is partially supported by small angle neutron scattering measurements, which indicate that the agglomeration state of the MWCNTs is the same at the concentrations studied.

  4. Methoxy-ether and crown-ether derivatives of tetrahomodioxa- and octahomotetraoxacalix[4]arenes.

    PubMed

    Masci, B; Saccheo, S; Fonsi, M; Varrone, M; Finelli, M; Nierlich, M; Thuéry, P

    2001-08-01

    Three methoxy-ether and one methoxy-ether/crown-ether derivatives of p-tert-butyltetrahomodioxa- and p-R-octahomotetraoxacalix[4]arenes (R = methyl, tert-butyl, H) have been investigated. The first three compounds, 7,15,21,27-tetra-tert-butyl-29,30,31,32-tetramethoxy-3,11-dioxapentacyclo[23.3.1.1(5,9).1(13,17).1(19,23)]ditriaconta-1(29),5,7,9(30),13,15,-17(31),19,21,23(32),25,27-dodecaene, C(50)H(68)O(6), 33,34,35,36-tetramethoxy-7,15,23,31-tetramethyl-3,11,19,27-tetraoxapentacyclo[27.3.1.1(5,9).1(13,17).1(21,25)]hexatriaconta-1(33),5,7,9(34),13,15,17(35),21,23,25(36),29,31-dodecaene, C(40)H(48)O(8), and 7,23-di-tert-butyl-33,34,35,36-tetramethoxy-3,11,19,27-tetraoxapentacyclo[27.3.1.1(5,9).1(13,17).1(21,25)]hexatriaconta-1(33),5,7,9(34),13,15,17(35),- 21,23,25(36),29,31-dodecaene, C(44)H(56)O(8), in the partial-cone or 1,2-alternate conformations, present the common feature of methoxy-ether self-inclusion, while the fourth, 42,43-dimethoxy-7,15,23,31-tetramethyl-3,11,19,27,34,37,40-heptaoxahexacyclo[15.15.9.1(5,9).1(21,25).0(13,41).0(29,33)]tritetraconta-5(42),6,8,13(41),14,16,21(43),22,24,29(33),30,32-dodecaene, C(42)H(50)O(9), adopts the 1,3-alternate conformation owing to the presence of a 1,3-polyether chain. PMID:11498633

  5. Chloroplast-Diphenyl Ether Interactions II 1

    PubMed Central

    Wettlaufer, S. H.; Alscher, Ruth; Strick, Christine

    1985-01-01

    Acifluorfen, a p-nitrodiphenyl ether herbicide, is inhibitory to those photosynthetic functions that require a functioning chloroplast envelope. Functions involving the stroma are also affected. Acifluorfen does not lyse intact spinach chloroplasts, yet does increase the sensitivity of CO2-dependent O2 evolution to exogenous inorganic phosphate without directly affecting the function of the phosphate translocator. Acifluorfen penetrates into the chloroplast stroma in a light-independent fashion. Once inside, it causes the inactivation of light and dithiothreitol-activated fructose 1,6-bisphosphatase. Light-activated glyceraldehyde-3-phosphate dehydrogenase (NADP) is also inactivated by acifluorfen. These data suggest that acifluorfen stimulates a pathway for inactivation of fructose 1,6-bisphosphatase and glyceraldehyde 3-phosphate dehydrogenase (NADP) which uses oxygen as a terminal oxidant and which involves thioredoxin and ferredoxin-thioredoxin reductase. PMID:16664219

  6. Synthesis of amphiphilic 6-carboxypullulan ethers.

    PubMed

    Pereira, Junia M; Mahoney, Michelle; Edgar, Kevin J

    2014-01-16

    Hydrophobically modified polysaccharides that contain carboxyl groups possess exceptional features for drug delivery and other applications. Carboxyl groups were introduced at C-6 in the pullulan backbone by applying the well-established oxidation with TEMPO and NaOCl/NaBr. The oxidized product, 6-carboxypullulan, is even more water-soluble than pullulan. Consequently, further chemical modifications have been mainly restricted to reactions that can be performed in water or under heterogeneous conditions. We find that the TBA salt of 6-carboxypullulan is soluble in a range of organic solvents and can be reacted homogeneously with various alkyl halides in DMSO and sodium hydroxide at 40 °C to yield 6-carboxypullulan ethers. Complete substitution (DS 7 per trisaccharide repeat unit) was achieved upon reaction with iodoethane, while products from reaction with longer chain alkyl halides (propyl and butyl derivatives) achieved DS up to about 3. The amphiphilic products have impressive surfactant properties. PMID:24188839

  7. Thermolysis of phenethyl phenyl ether: A model of ether linkages in low rank coal

    SciTech Connect

    Britt, P.F.; Buchanan, A.C. III; Malcolm, E.A.

    1994-09-01

    Currently, an area of interest and frustration for coal chemists has been the direct liquefaction of low rank coal. Although low rank coals are more reactive than bituminous coals, they are more difficult to liquefy and offer lower liquefaction yields under conditions optimized for bituminous coals. Solomon, Serio, and co-workers have shown that: in the pyrolysis and liquefaction of low rank coals, a low temperature cross-linking reaction associated with oxygen functional groups occurs before tar evolution. A variety of pretreatments (demineralization, alkylation, and ion-exchange) have been shown to reduce these retrogressive reactions and increase tar yields, but the actual chemical reactions responsible for these processes have not been defined. In order to gain insight into the thermochemical reactions leading to cross-linking in low rank coal, we have undertaken a study of the pyrolysis of oxygen containing coal model compounds. Solid state NMR studies suggest that the alkyl aryl ether linkage may be present in modest amounts in low rank coal. Therefore, in this paper, we will investigate the thermolysis of phenethyl phenyl ether (PPE) as a model of 0-aryl ether linkages found in low rank coal, lignites, and lignin, an evolutionary precursor of coal. Our results have uncovered a new reaction channel that can account for 25% of the products formed. The impact of reaction conditions, including restricted mass transport, on this new reaction pathway and the role of oxygen functional groups in cross-linking reactions will be investigated.

  8. High temperature fuel cell membranes based on poly(arylene ether)s containing benzimidazole groups

    SciTech Connect

    Kim, Dae Sik; Kim, Yu Seung; Lee, Kwan - Soo; Boncella, James M; Kuiper, David; Guiver, Michael D

    2009-01-01

    Development of new high-performance polymer membranes that retain their proton conductivity under low humidity conditions is one of the most critical requirements to commercialize PEMFC systems. Current sulfonated proton exchange membranes acquire proton conductivity by water that solvates ion and carries proton. Consequently, a loss of water under low RH conditions immediately results in a loss of proton conductivity. One approach to maintain proton conductivity under low RH conditions is to replace water with a less volatile proton solvent. Kreuer has pointed out the possibility to develop fully polymeric proton-conducting membranes based on nitrogen-containing heterocycles such as imidazole, benzimidazole, and pyrazole. We have attempted to blend those less volatile proton solvent with sulfonated copolymers such as polystyrene sulfonic acid, Nafion, poly(arylene ether sulfone, BPSH-xx). [Ref. DOE review meeting 2007 and 2008] However, we observed that imidazole was slowly sublimated out as temperature and humidity increases which could cause poisoning of electro-catalyst, corrosion and losing conductivity. In this presentation, we report the synthesis of novel poly(arylene ether sulfone)s containing benzimidazole groups These benzimidazole containing polymer was blended with sulfonated poly(arylene ether sulfone). In the blend system, benzimidazole group attached to the polysulfone acts as a medium through the basic nitrogen for transfer of protons between the sulfonic acid groups. Proton conductivity of the blend membranes was investigated as a function of water content at 80 C and compared the performance with water based proton conduction system.

  9. Formulating liquid ethers for microtubular SOFCs

    NASA Astrophysics Data System (ADS)

    Kendall, Kevin; Slinn, Matthew; Preece, John

    One of the key problems of applying solid oxide fuel cells (SOFCs) in transportation is that conventional fuels like kerosene and diesel do not operate directly in SOFCs without prereforming to hydrogen and carbon monoxide which can be handled by the nickel cermet anode. SOFCs can internally reform certain hydrocarbon molecules such as methanol and methane. However, other liquid fuels usable in petrol or diesel internal combustion engines (ICEs) have not easily been reformable directly on the anode. This paper describes a search for liquid fuels which can be mixed with petrol or diesel and also injected directly into an SOFC without destroying the nickel anode. When fuel molecules such as octane are injected onto the conventional nickel/yttria stabilised zirconia (Ni/YSZ) SOFC fuel electrode, the anode rapidly becomes blocked by carbon deposition and the cell power drops to near zero in minutes. This degeneration of the anode can be inhibited by injection of air or water into the anode or by some upstream reforming just before entry to the SOFC. Some smaller molecules such as methane, methanol and methanoic acid produce a slight tendency to carbon deposition but not sufficient to prevent long term operation. In this project we have investigated a large number of molecules and now found that some liquid ethers do not significantly damage the anode when directly injected. These molecules and formulations with other components have been evaluated in this study. The theory put forward in this paper is that carbon-carbon bonds in the fuel are the main reason for anode damage. By testing a number of fuels without such bonds, particularly liquid ethers such as methyl formate and dimethoxy methane, it has been shown that SOFCs can run without substantial carbon formation. The proposal is that conventional fuels can be doped with these molecules to allow hybrid operation of an ICE/SOFC device.

  10. Cleavage of benzylaryl ethers in the presence of zinc halides

    SciTech Connect

    Frederick, T.J.; Bell, A.T.

    1984-05-01

    Ether groups constitute one of the primary linkages between aromatic centers present in coal. During the liquefaction of coal under the influence of zinc halides, it is believed that these linkages are cleaved. The details of this process have been studied in the present investigation using benzylphenyl ether (BPE), benzyl-p-tolyl ether (BTE), and benzyl-l-naphthyl ether (BNE) to represent the ether structures present in coal. ZnCl/sub 2/ and ZnBr/sub 2/ were used as catalysts. ZnCl/sub 2/ was found to be catalytically inactive. However, in the presence of HCl it forms a stable adduct which is highly active. HBr/ZnBr/sub 2/ behaves in a manner analogous to HCl/ZnCl/sub 2/ but is tenfold more active. All three ethers react in a similar fashion. In each case cleavage occurs at the oxygen-methylene bond and is accompanied by a small degree of ether rearrangement to form the corresponding hydroxydiarylmethane. The reaction kinetics for BPE, BTE, and BNE can be described in terms of a carbocation mechanism. Rate coefficients for each of the elementary steps have been determined by simulation of the experimentally observed product concentration versus time profiles.

  11. Crown Ethers in Nonaqueous Electrolytes for Lithium/Air Batteries

    SciTech Connect

    Xu, Wu; Xiao, Jie; Wang, Deyu; Zhang, Jian; Zhang, Jiguang

    2010-02-04

    The effects of three crown ethers, 12-crown-4, 15-crown-5, and 18-crown-6, as additives and co-solvents in non-aqueous electrolytes on the cell performance of primary Li/air batteries operated in a dry air environment were investigated. Crown ethers have large effects on the discharge performance of non-aqueous electrolytes in Li/air batteries. A small amount (normally less than 10% by weight or volume in electrolytes) of 12-Crown-4 and 15-crown-5 reduces the battery performance and a minimum discharge capacity appears at the crown ether content of ca. 5% in the electrolytes. However, when the content increases to about 15%, both crown ethers improve the capacity of Li/air cells by about 28% and 16%, respectively. 15-Crown-5 based electrolytes even show a maximum discharge capacity in the crown ether content range from 10% to 15%. On the other hand, the increase of 18-crown-6 amount in the electrolytes continuously lowers of the cell performance. The different battery performances of these three crown ethers in electrolytes are explained by the combined effects from the electrolytes’ contact angle, oxygen solubility, viscosity, ionic conductivity, and the stability of complexes formed between crown ether molecules and lithium ions.

  12. Prenyl Ethers: Novel Fungal Volatiles Formed by Penicillium digitatum.

    PubMed

    Amrein, Thomas M; Frey, Peter; Meier, Roberto; Baumann, Heidi; Tanner, Miriam; Gassenmeier, Klaus F

    2014-10-01

    Prenyl ethyl ether (PEE) was previously described as the cause for a solvent-like off-note in ground hazelnuts, but its origin remained unclear. Investigations were carried out by analytical groups of Coop and Givaudan over four years to elucidate this phenomenon. From mouldy citrus fruits a strain of Penicillium digitatum was isolated and found to form PEE. Formation on citrus and other fruits was prominent and contributed to the particular smell of decayed fruits. Several strains of P. digitatum formed PEE, while other fungal species did not. In contrast to citrus fruit, prenyl methyl ether (PME) was formed as dominant prenyl ether on hazelnuts while only small amounts of PEE were found. PME has not been previously described as volatile metabolite of fungi or as a food-taint. Spiking experiments with deuterated ethanol showed that the ethyl group is likely incorporated into PEE via the aldehyde form. On hazelnuts strongly decayed by P. digitatum yet another prenyl ether was tentatively identified: Prenyl isopropyl ether. Prenyl ethers present a novel group of volatile metabolites of P. digitatum. They are likely typical for this species and have not been described before. Prenyl ethers seem to play a significant role in the smell of food decayed by P. digitatum and should be considered in cases of off-notes and taints. PMID:25437159

  13. Fluorodecarboxylation for the Synthesis of Trifluoromethyl Aryl Ethers.

    PubMed

    Zhang, Qing-Wei; Brusoe, Andrew T; Mascitti, Vincent; Hesp, Kevin D; Blakemore, David C; Kohrt, Jeffrey T; Hartwig, John F

    2016-08-01

    The synthesis of mono-, di-, and trifluoromethyl aryl ethers by fluorodecarboxylation of the corresponding carboxylic acids is reported. AgF2 induces decarboxylation of aryloxydifluoroacetic acids, and AgF, either generated in situ or added separately, serves as a source of fluorine to generate the fluorodecarboxylation products. The addition of 2,6-difluoropyridine increased the reactivity of AgF2 , thereby increasing the range of functional groups and electronic properties of the aryl groups that are tolerated. The reaction conditions used for the formation of trifluoromethyl aryl ethers also served to form difluoromethyl and monofluoromethyl aryl ethers. PMID:27384710

  14. ANAEROBIC MICROBIAL REDUCTIVE DEBROMINATION OF POLYBROMINATED DIPHENYL ETHERS

    EPA Science Inventory

    Polybrominated diphenyl ether (PBDE) flame retardants have been detected in sediments, sewage sludge, fish, mammals (including humans), and air throughout the northern hemisphere. While concentrations of PCBs, DDT, and PCDDs in biota are generally decreasing, PBDE concentratio...

  15. 36. BUILDINGS NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. BUILDINGS NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, AND NO. 523, REFRIGERATION PLANT BUILDING, LOOKING EAST. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  16. PREDICTIONS OF AZEOTROPES FORMED FROM FLUORINATED ETHERS, ETHANES, AND PROPANES

    EPA Science Inventory

    The paper discusses an evaluation of the potential for azeotrope formation and performance for fluorinated ethers, ethanes, and propanes. (NOTE: The synthesis of new non-chlorinated refrigerants expands the base of alternatives for replacing ozone-depleting chlorofluorocarbons (O...

  17. Syngas to olefins via dimethyl ether over zeolite catalysts

    SciTech Connect

    Lee, B.G.; Sardesai, A.; Lee, S.

    1998-12-31

    Coal or natural gas-based syngas can be converted to dimethyl ether (DME) in a dual catalytic, single-stage liquid phase process. The process described here converts dimethyl ether to lower olefins, such as ethylene, propylene, and butenes. Thus, a novel process of producing olefins from syngas via dimethyl ether has been introduced. The process feasibility of dimethyl ether conversion has been evaluated and the range of products of this process has also been identified. The effect of operating parameters and catalyst characteristics on product selectivity has been studied. The superior process advantages as well as its competitive economics quite clearly identify this process to be quite promising when conducted on an industrial scale.

  18. POLYBROMINATED DIPHENYL ETHERS (PBDES) CONTAMINATION OF UNITED STATES FOOD

    EPA Science Inventory

    Elevated levels of polybrominated diphenyl ethers (PBDEs), a type of brominated flame retardant, were recently detected in United States (U.S.) nursing mothers' milk. These halogenated compounds chemically and toxicologically resemble others such as polychlorinated biphenyls (PC...

  19. 44. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, LOOKING UP DISTILLATION TOWER FROM 2ND LEVEL. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  20. Improved boundary lubrication with formulated C-ethers

    NASA Technical Reports Server (NTRS)

    Loomis, W. R.

    1982-01-01

    A comparison of five recently developed C-ether-formulated fluids with an advanced formulated MIL-L-27502 candidate ester is described. Steady state wear and friction measurements were made with a sliding pin on disk friction apparatus. Conditions included disk temperatures up to 260 C, dry air test atmosphere, 1 kilogram load, 50 rpm disk speed, and test times to 130 minutes. Based on wear rates and coefficients of friction, three of the C-ether formulations as well as the C-ether base fluid gave better boundary lubrication than the ester fluid under all test conditions. The susceptibility of C-ethers to selective additive treatment (phosphinic esters or acids and other antiwear additives) was demonstrated when two of the formulations gave somewhat improved lubrication over the base fluid. The increased operating potential for this fluid was shown in relationship to bulk oil temperature limits for MIL-L-23699 and MIL-L-27502 type esters.

  1. The introduction of ether anaesthesia in the Nordic countries.

    PubMed

    Secher, O

    1985-01-01

    The way in which the news about ether anaesthesia went from U.S.A. to Europe is briefly described. The first information about ether anaesthesia came to the Scandinavian countries in 1847 through newspapers, which had their information from newspapers in England, France and Germany. The professional news came to the respective countries from doctors who were studying medical progress in Paris or from French medical journals. The first Scandinavian Society to be informed was the Swedish, and the first ether anaesthesia was given in Stockholm about 6 February. Denmark was next, and the first anaesthesia was given about 20 February in Copenhagen. In Norway, ether was used on 4 March in Christiania (Oslo), and in Finland on 8 March in Helsingfors (Helsinki). Anaesthesia in Iceland cannot be traced any earlier than 1856. A table shows when the first anaesthetics were given in different places in Europe and the world. PMID:3883682

  2. POLYBROMINATED DIPHENYL ETHERS IN HOUSE DUST AND CLOTHES DRYER LINT

    EPA Science Inventory

    Polybrominated diphenyl ether (PBDE) flame retardants are now considered ubiquitous and persistent pollutants. Few studies have examined the concentrations of these chemicals in the home and here we report measurements of PBDEs in house dust samples collected from the Washington...

  3. Reactions involving shifting of the double bond in cyclic ethers

    SciTech Connect

    Ibatullin, U.G.; Petrushina, T.F.; Akhmadeeva, A.A.; Safarov, M.G.

    1985-09-01

    4-Methylenetetrahydropyran undergoes isomerization to 4-methyl-5,6-dihydropyran in the presence of sodium on aluminum oxide. Both pyrans are converted to a vinyl ether, viz., 4-methyl-2,3-dihydropyran, under the influence of iron pentacarbonyl.

  4. FLUORINATED ETHERS--A NEW SERIES OF CFC SUBSTITUTES

    EPA Science Inventory

    The paper discusses fluorinated ethers, a new series of chlorofluorocarbon (CFC) substitutes. ompounds synthesized to produce substances with suitable refrigerant properties have generally left out sulfur, nitrogen, and oxygen. he reasons for these omissions are many and varied. ...

  5. Pd-Catalyzed Synthesis of Allylic Silanes from Allylic Ethers

    PubMed Central

    Moser, Ralph; Nishikata, Takashi; Lipshutz, Bruce H.

    2009-01-01

    Allylic phenyl ethers serve as electrophiles towards Pd(0) en route to a variety of allylic silanes. The reactions can be run at room temperature in water as the only medium using micellar catalysis. PMID:19950911

  6. Excitation of certain posterolateral hypothalamic units by cyclopropane and ether

    PubMed Central

    Millar, R. A.; Silver, I. A.

    1971-01-01

    1. Extracellular activity was recorded from single units in the posterolateral hypothalamus in nineteen cats before, during, and after the administration of the inhalation anaesthetics cyclopropane, diethyl ether and halothane. 2. Unit discharge was significantly increased by 25-50% cyclopropane in eighteen of the forty-four cells tested with this anaesthetic, and in seven of fourteen cells tested with diethyl ether. This excitatory effect was associated with cortical EEG suppression. 3. The remaining cells tested were depressed by cyclopropane or ether, and this also occurred during halothane administration. 4. Excitation of certain cells in the posterolateral hypothalamus is discussed in relation to the increased preganglionic sympathetic activity evoked by cyclopropane and ether. PMID:5560895

  7. Tough poly(arylene ether) thermoplastics as modifiers for bismaleimides

    NASA Technical Reports Server (NTRS)

    Stenzenberger, H. D.; Roemer, W.; Hergenrother, P. M.; Jensen, B. J.

    1989-01-01

    Several aspects of research on thermoplastics as toughness modifiers are discussed, including the contribution of the backbone chemistry and the concentration of the poly(arylene ether) thermoplastic to fracture toughness, influence of the molecular weight of the poly(arylene ether) thermoplastic on neat resin fracture toughness, and the morphology of the thermoplastic modified networks. The results show that fracture toughness of brittle bismaleimide resins can be improved significantly with poly(arylene ether) thermoplastic levels of 20 percent by weight, and that high molecular weight poly(arylene ether) based on bisphenol A provides the highest degree of toughening. Preliminary composite evaluation shows that improvements in neat resin toughness translate into carbon fabric composite.

  8. Synthesis of ethers from esters via Fe-catalyzed hydrosilylation.

    PubMed

    Das, Shoubhik; Li, Yuehui; Junge, Kathrin; Beller, Matthias

    2012-11-11

    Triiron dodecacarbonyl allows for the selective reduction of esters into the corresponding ethers. This protocol has a wide substrate scope. In addition, cholesteryl pelarogonate has been reduced under the reaction conditions with an excellent yield. PMID:23024977

  9. Method for making aromatic ethers using diorganoamino pyridinium salt catalyst

    SciTech Connect

    Brunelle, D. J.; Singleton, D. A.

    1985-04-23

    A method is provided for making aromatic ethers by effecting the displacement of reactive radicals on an activated aromatic nucleus such as a phthalimide with a mono or bisalkali metal phenoxide in the presence of an organic solvent and a dialkylamino branched alkyl substituted pyridinium salt as a phase transfer catalyst. Improved yields of bis(aromatic ethers) are achieved without the production of undesirable by-products, such as alkylated phenols.

  10. Thermolytic cleavage of selected ether linkages at mild temperatures

    SciTech Connect

    Chawla, B.; Davis, B.H. ); Shi, Buchang; Guthrie, R.D. )

    1990-01-01

    Most of the reported studies describing the thermolysis of coal model compounds, ethers in particular, have been performed at much higher temperatures than used in coal liquefaction processes. Obviously, conclusions derived from thermolysis at the higher temperatures cannot be applied directly toward understanding of coal dissolution and/or thermolysis processes. Therefore, they initiated studies on the chemistry of thermolysis of four arylmethyl aryl ethers which undergo thermolysis to a significant extent under relatively mild reaction conditions.

  11. Bisthioxanthylidene biscrown ethers as potential stereodivergent chiral ligands.

    PubMed

    Geertsema, Edzard M; Schoevaars, Anne Marie; Meetsma, Auke; Feringa, Ben L

    2006-11-21

    The concept of bisthioxanthylidene biscrown ethers as potential stereodivergent chiral ligands in asymmetric synthesis is introduced. Substituted bisthioxanthylidenes may be chiral and can exist as stable enantiomers due to their folded structure. As a result, both a right-handed helix (P) and left-handed helix (M) are present in this type of molecule. This offers the unique possibility to construct two crown ether moieties, attached to the same molecule, of which one exhibits (P)-helicity and the other (M)-helicity. When the crown ether moieties differ in size they can be complexed selectively with a base containing a cation of appropriate diameter. In this manner the (P)-helix and the (M)-helix can be activated selectively to serve as a chiral environment for base catalyzed asymmetric synthesis. Thus, we envisioned the new concept of a single chiral ligand to separately synthesize two enantiomers of a chiral product just by varying the added base. For this purpose, four new bisthioxanthylidene monocrown ethers and two new bisthioxanthylidene biscrown ethers were synthesized. Two biscrowns and two monocrowns were separated into their respective enantiomers (HPLC) and optical data (UV and CD) were collected to ensure stability of enantiomers at ambient temperatures. Ion complexation of one mono- and two biscrown ethers with potassium and sodium cations was investigated. PMID:17312964

  12. Keeping ether "en-vogue": the role of Nathan Cooley Keep in the history of ether anesthesia.

    PubMed

    Guralnick, Walter C; Kaban, Leonard B

    2011-07-01

    In this report, we explore the little known role of Dr Nathan Cooley Keep in the dissemination of ether anesthesia in Boston. Keep was a prominent Boston dentist who, for a short time, taught and employed both William Morton and Horace Wells. He used ether anesthesia for a variety of dental and other surgical procedures requiring pain control. Keep administered ether to anesthetize Henry Wadsworth Longfellow's wife during the delivery of their daughter. This was the first use of ether for obstetric anesthesia. Dr Keep was also the first Dean of the Harvard Dental School and convinced the Massachusetts General Hospital to appoint a dentist to the staff of the hospital for the first time. PMID:21549472

  13. Dimethyl ether (DME) as an alternative fuel

    NASA Astrophysics Data System (ADS)

    Semelsberger, Troy A.; Borup, Rodney L.; Greene, Howard L.

    With ever growing concerns on environmental pollution, energy security, and future oil supplies, the global community is seeking non-petroleum based alternative fuels, along with more advanced energy technologies (e.g., fuel cells) to increase the efficiency of energy use. The most promising alternative fuel will be the fuel that has the greatest impact on society. The major impact areas include well-to-wheel greenhouse gas emissions, non-petroleum feed stocks, well-to-wheel efficiencies, fuel versatility, infrastructure, availability, economics, and safety. Compared to some of the other leading alternative fuel candidates (i.e., methane, methanol, ethanol, and Fischer-Tropsch fuels), dimethyl ether appears to have the largest potential impact on society, and should be considered as the fuel of choice for eliminating the dependency on petroleum. DME can be used as a clean high-efficiency compression ignition fuel with reduced NO x, SO x, and particulate matter, it can be efficiently reformed to hydrogen at low temperatures, and does not have large issues with toxicity, production, infrastructure, and transportation as do various other fuels. The literature relevant to DME use is reviewed and summarized to demonstrate the viability of DME as an alternative fuel.

  14. Explosion and detonation characteristics of dimethyl ether.

    PubMed

    Mogi, Toshio; Horiguchi, Sadashige

    2009-05-15

    In this study, the explosion and detonation characteristics of dimethyl ether (DME) were experimentally investigated. A spherical pressure vessel with an internal volume of 180L was used as the explosion vessel. Therefore, tubes 10m in length with internal diameters of 25mm and 50mm were used as detonation tubes. In addition, we compared the characteristics of DME with those of propane since DME is considered as a substitute fuel for liquid petroleum gas (LPG). At room temperature and atmospheric pressure, the maximum explosive pressure increased tenfold. The explosion index (K(G) values), an indicator of the intensity of an explosion, was larger than that of propane, indicating that the explosion was intense. No experimental study has been conducted on the detonation behavior of DME so far, but this research confirmed a transition to detonation. The detonation characteristics were similar to the characteristics of the Chapman-Jouguet detonation, and the concentration range for detonation was from 5.5% to 9.0%. PMID:18774641

  15. Tumour scanning with indium-111 dihaematoporphyrin ether.

    PubMed Central

    Quastel, M. R.; Richter, A. M.; Levy, J. G.

    1990-01-01

    Photofrin II (dihaematoporphyrin ether/ester, DHE) was labelled with indium-111 and its biodistribution in tumour bearing mice compared with that of 111In chloride. The uptake and clearance of 111In labelled DHE differed markedly from that of indium-111 chloride in that the former was not taken up by the tissues as much as the latter. Scintillation scanning with a gamma-camera showed marked uptake of both 111In agents at the site of the tumour, but a much lower tissue background (excluding the abdominal organs) for the mice given 111In DHE. Tumour:muscle ratios of dissected tissues were 2-3 times higher in 111In DHE treated animals as compared to the uptake of 111In chloride. There was a distinct difference in the pattern of distribution of the two 111In preparations in the tissues. The major accumulation of 111In chloride was in the kidneys, whereas the highest uptake of 111In DHE was in the liver, the organ in which unlabelled porphyrins accumulate. Extraction and testing of materials from tumours of 111In DHE treated animals indicated that most of the tumour extractable 111In had remained associated with the porphyrin in vivo up to 4 days after injection. Images Figure 1 PMID:2147858

  16. Nonlinear dielectric effect in supercritical diethyl ether

    NASA Astrophysics Data System (ADS)

    Drozd-Rzoska, Aleksandra; Rzoska, Sylwester J.; Martinez-Garcia, Julio Cesar

    2014-09-01

    Nonlinear dielectric effect (NDE) describes changes of dielectric permittivity induced by a strong electric field in a liquid dielectric. The most classical finding related to this magnitude is the negative sign of NDE in liquid diethyl ether (DEE), recalled by Peter Debye in his Nobel Prize lecture. This article shows that the positive sign of NDE in DEE is also possible, in the supercritical domain. Moreover, NDE on approaching the gas-liquid critical point exhibits a unique critical effect described by the critical exponent ψ ≈ 0.4 close to critical temperature (TC) and ψ ≈ 0.6 remote from TC. This can be linked to the emergence of the mean-field behavior in the immediate vicinity of TC, contrary to the typical pattern observed for critical phenomena. The multi-frequency mode of NDE measurements made it possible to estimate the evolution of lifetime of critical fluctuations. The new way of data analysis made it possible to describe the critical effect without a knowledge of the non-critical background contribution in prior.

  17. Vibrational spectroscopic study of pure and silica-doped sulfonated poly(ether ether ketone) membranes

    NASA Astrophysics Data System (ADS)

    Rangasamy, Vijay Shankar; Thayumanasundaram, Savitha; Seo, Jin Won; Locquet, Jean-Pierre

    2015-03-01

    We report the vibrational properties of sulfonated poly(ether ether ketone) (SPEEK) membranes, used as electrolytes in proton exchange membrane (PEM) fuel cells, studied by Fourier transform infrared (FTIR) spectroscopy. We discuss the changes in the vibrational modes of the functional groups present in the polymer arising due to the sulfonation process and the subsequent incorporation of silica particles functionalized with sulfonic acid group. From the infrared spectra, we confirm the incorporation of sulfonic acid group in the polymer chain as well as in the functionalized silica particles. We have also measured the variations in the peak area ratio of the characteristic out-of-plane vibrations of the aromatic rings in the PEEK polymer at 1280 cm-1 with respect to a reference peak at 1305 cm-1. These values were correlated to the crystallinity (XC) values experimentally determined by DSC technique, providing a non-destructive means to calculate the crystallinity of polymer membranes. The calculated XC values were in good agreement with the experimental values. The crystallinity was observed to decrease with increasing degree of sulfonation (DS), indicating the crystalline-to-amorphous phase modification of the polymer by sulfonation, which along with the enhanced ion-exchange capacity and water uptake, is responsible for the improved ionic conductivity at higher DS values.

  18. Investigation of crystalline morphology in poly (ether ether ketone) using dielectric relaxation spectroscopy

    SciTech Connect

    Kalika, D.S.; Krishnaswamy, R.K.

    1993-12-31

    The relaxation behavior of poly (ether ether ketone) [PEEK] has been investigated using dielectric relaxation spectroscopy; the glass-rubber ({alpha}) relaxation and a sub-glass ({beta}) relaxation were examined for the amorphous material and both cold-crystallized and melt-crystallized specimens. Analysis of the data using the Cole-Cole modification of the Debye equation allowed determination of the dielectric relaxation strength and relaxation broadening parameter for both transitions as a function of material crystallization history. The crystallized specimens displayed a positive offset in isochronal loss temperature for both the {alpha} and {beta} relaxations, with the {alpha} relaxation broadened significantly. The measured dipolar response was interpreted using a three-phase morphological model encompassing a crystalline phase, a mobile amorphous phase, and a rigid amorphous phase. Determination of phase fractions based on dipolar mobilization across the glass-rubber relaxation revealed a finite rigid amorphous phase fraction for both the cold-crystallized specimens which was relatively insensitive to thermal history and degree of crystallinity (W{sub RAP}40.20).

  19. Electrical conductivity of sulfonated poly(ether ether ketone) based composite membranes containing sulfonated polyhedral oligosilsesquioxane

    NASA Astrophysics Data System (ADS)

    Celso, Fabricio; Mikhailenko, Serguei D.; Rodrigues, Marco A. S.; Mauler, Raquel S.; Kaliaguine, Serge

    2016-02-01

    Composite proton exchange membranes (PEMs) intended for fuel cell applications were prepared by embedding of various amounts of dispersed tri-sulfonic acid ethyl POSS (S-Et-POSS) and tri-sulfonic acid butyl POSS (S-Bu-POSS) in thin films of sulfonated poly ether-ether ketone. The electrical properties of the PEMs were studied by Impedance spectroscopy and it was found that their conductivity σ changes with the filler content following a curve with a maximum. The water uptake of these PEMs showed the same dependence. The investigation of initial isolated S-POSS substances revealed the properties of typical electrolytes, which however in both cases possessed low conductivities of 1. 17 × 10-5 S cm-1 (S-Et-POSS) and 3.52 × 10-5 S cm-1 (S-Bu-POSS). At the same time, the insoluble in water S-POSS was found forming highly conductive interface layer when wetted with liquid water and hence producing a strong positive impact on the conductivity of the composite PEM. Electrical properties of the composites were analysed within the frameworks of effective medium theory and bounding models, allowing to evaluate analytically the range of possible conductivity values. It was found that these approaches produced quite good approximation of the experimental data and constituted a fair basis for interpretation of the observed relationship.

  20. Enhanced osteoblast responses to poly ether ether ketone surface modified by water plasma immersion ion implantation.

    PubMed

    Wang, Heying; Lu, Tao; Meng, Fanhao; Zhu, Hongqin; Liu, Xuanyong

    2014-05-01

    Poly ether ether ketone (PEEK) offers a set of characteristics superior for human implants; however, its application is limited by the bio-inert surface property. In this work, PEEK surface was modified using single step plasma immersion ion implantation (PIII) treatment with a gas mixture of water vapor as a plasma resource and argon as an ionization assistant. Field emission scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy were used to investigate the microstructure and composition of the modified PEEK surface. The water contact angle and zeta-potential of the surfaces were also measured. Osteoblast precursor cells MC3T3-E1 and rat bone mesenchymal stem cells were cultured on the PEEK samples to evaluate their cytocompatibility. The obtained results show that the hydroxyl groups as well as a "ravined structure" are constructed on water PIII modified PEEK. Compared with pristine PEEK, the water PIII treated PEEK is more favorable for osteoblast adhesion, spreading and proliferation, besides, early osteogenic differentiation indicated by the alkaline phosphatase activity is also up-regulated. Our study illustrates enhanced osteoblast responses to the PEEK surface modified by water PIII, which gives positive information in terms of future biomedical applications. PMID:24632035

  1. Copoly(arlene ether)s containing pendant sulfonic acid groups as proton exchange membrane

    SciTech Connect

    Kim, Yu Seung; Kim, Dae Sik; Robertson, Gilles; Guiver, Michael

    2008-01-01

    A copoly(arylene ether) (PAE) with high fluorine content and a copoly(arylene ether nitrile) (PAEN) with high nitrile content, each containing pendant phenyl sulfonic acids were synthesized. The P AE and PAEN were prepared from decafluorobiphenyl (DFBP) and difluorobenzonitrile (DFBN) respectively, by polycondensation with 2-phenylhydroquinone (PHQ) by conventional aromatic nucleophilic substitution reactions. The sulfonic acid groups were introduced by mild post-sulfonation exclusively on the para-position of the pendant phenyl ring in PHQ. The membrane properties of the resulting sulfonated copolymers sP AE and sP AEN were compared for fuel cell applications. The copolymers sPAE and sPAEN, each having a degree of sulfonation (DS) of 1.0 had high ion exchange capacities (IEC{sub v}(wet) (volume-based, wet state)) of 1.77 and 2.55 meq./cm{sup 3}, high proton conductivities of 135.4 and 140.1 mS/cm at 80 C, and acceptable volume-based water uptake of 44.5-51.9 vol% at 80 C, respectively, compared to Nafion. The data points of these copolymer membranes are located in the area of outstanding properties in the trade-off plot of alternative hydrocarbon polyelectrolyte membranes (PEM) for the relationship between proton conductivity versus water uptake (weight based or volume based). Furthermore, the relative selectivity derived from proton conductivity and methanol permeability is higher than that of Nafion.

  2. Absorption of some glycol ethers through human skin in vitro.

    PubMed Central

    Dugard, P H; Walker, M; Mawdsley, S J; Scott, R C

    1984-01-01

    To assist evaluation of the hazards of skin contact with selected undiluted glycol ethers, their absorption across isolated human abdominal epidermis was measured in vitro. Epidermal membranes were set up in glass diffusion cells and, following an initial determination of permeability to tritiated water, excess undiluted glycol ether was applied to the outer surface for 8 hr. The appearance of glycol ether in an aqueous "receptor" phase bathing the underside of the epidermis was quantified by a gas chromatographic technique. A final determination of tritiated water permeability was compared with initial values to establish any irreversible alterations in epidermal barrier function induced by contact with the glycol ethers. 2-methoxyethanol (EM) was most readily absorbed (mean steady rate 2.82 mg/cm2/hr), and a relatively high absorption rate (1.17 mg/cm2/hr) was also apparent for 1-methoxypropan-2-ol (PM). There was a trend of reducing absorption rate with increasing molecular weight or reducing volatility for monoethylene glycol ethers (EM, 2.82 mg/cm2/hr; 2-ethoxyethanol, EE, 0.796 mg/cm2/hr; 2-butoxyethanol, EB, 0.198 mg/cm2/hr) and also within the diethylene glycol series: 2-(2-methoxyethoxy) ethanol (DM, 0.206 mg/cm2/hr); 2-(2-ethoxyethoxy) ethanol (DE, 0.125 mg/cm2/hr) and 2-(2-butoxyethoxy) ethanol (DB, 0.035 mg/cm2/hr). The rate of absorption of 2-ethoxyethyl acetate (EEAc) was similar to that of the parent alcohol, EE. Absorption rates of diethylene glycol ethers were slower than their corresponding monoethylene glycol equivalents. Combination of intrinsic toxicity and ability to pass across skin contribute to assessment of hazards of contact with undiluted glycol ethers. PMID:6499804

  3. Optimisation of a 5-[3-phenyl-(2-cyclic-ether)-methyl-ether]-4-aminopyrrolopyrimidine series of IGF-1R inhibitors.

    PubMed

    Fairhurst, Robin A; Marsilje, Thomas H; Stutz, Stefan; Boos, Andreas; Niklaus, Michel; Chen, Bei; Jiang, Songchun; Lu, Wenshuo; Furet, Pascal; McCarthy, Clive; Stauffer, Frédéric; Guagnano, Vito; Vaupel, Andrea; Michellys, Pierre-Yves; Schnell, Christian; Jeay, Sébastien

    2016-04-15

    Taking the pyrrolopyrimidine derived IGF-1R inhibitor NVP-AEW541 as the starting point, the benzyl ether back-pocket binding moiety was replaced with a series of 2-cyclic ether methyl ethers leading to the identification of novel achiral [2.2.1]-bicyclic ether methyl ether containing analogues with improved IGF-1R activities and kinase selectivities. Further exploration of the series, including a fluorine scan of the 5-phenyl substituent, and optimisation of the sugar-pocket binding moiety identified compound 33 containing (S)-2-tetrahydrofuran methyl ether 6-fluorophenyl ether back-pocket, and cis-N-Ac-Pip sugar-pocket binding groups. Compound 33 showed improved selectivity and pharmacokinetics compared to NVP-AEW541, and produced comparable in vivo efficacy to linsitinib in inhibiting the growth of an IGF-1R dependent tumour xenograft model in the mouse. PMID:26951753

  4. Laboratory Method for Analysis of Small Concentrations of Methyl tert-Butyl Ether and Other Ether Gasoline Oxygenates in Water

    USGS Publications Warehouse

    Rose, Donna L.; Connor, Brooke F.; Abney, Sonja R.; Raese, Jon W.

    1998-01-01

    This Fact Sheet presents data for analysis of nanogram-per-liter concentrations of methyl tert-butyl ether (MTBE) and three other ether gasoline oxygenates, including methyl tert-pentyl ether (TAME), diisopropyl ether (DIPE), and ethyl tert-butyl ether (ETBE), by purge- and-trap capillary-column gas chromatography. Long-term method detection levels (LT-MDLs) for MTBE, TAME, DIPE, and ETBE ranged from 15 to 83 nanograms per liter (0.015 to 0.083 microgram per liter). Nanogram-per-liter-concentration detections are reported if all of the identification criteria are met, whereas previous methods censored detections at a pre-determined method reporting level. The reporting level for this method is defined as two times the LT-MDL, does not censor detections at less than this concentration, and is referred to as the nondetection value (NDV). Bias and variability data from multiple analyses, analysts, and instruments over a 60-day period show the oxygenate recoveries ranging from 100 to 109 percent, with 6 to 8 percent relative standard deviation. MTBE, TAME, DIPE, and ETBE were not detected in the analysis of 225 laboratory reagent blanks from January to December 1997. A preservation study in ground water and surface water indicates that all the oxygenates are stable at pH 2 for up to 216 days, with recoveries ranging from 94 to 115 percent on day 216, and relative standard deviations ranging from 5 to 9 percent for the duration of the study.

  5. Coal liquefaction model studies: free radical chain decomposition of diphenylpropane, dibenzyl ether, and phenyl ether via. beta. -scission reactions

    SciTech Connect

    Gillert, K.E.; Gojewski, J.J.

    1982-12-03

    The thermal decompositions to 1,3-diphenylpropane (1), dibenzyl ether (2), and phenethyl phenyl ether (3) have been found to proceed by free radical chain processes. 1 gave toluene and styrene with a reaction order of 1.55, E/sub A/ = 51.4 kcal/mol, and log A = 12.5. The reaction could be initiated by benzyl phenyl ether but not by 1,2-diphenylethane. 2 gave toluene and benzaldehyde with a reaction order of 1.43,E/sub A/ = 48 kcal/mol, and log A = 12.6. The reaction could be initiated with benzyl phenyl ether. 3 gave phenol and styrene with a reaction order of 1.21, E/sub A/ = 50.3 kcal/mol, and log A =12.3. The reaction could be initiated by benzyl phenyl ether. All of the data are consistent with free radical processes with the reaction order determined by the termination reaction. No evidence for concerted reactions has been found.

  6. Synthesis and characterization of novel cellulose ether sulfates.

    PubMed

    Rohowsky, Juta; Heise, Katja; Fischer, Steffen; Hettrich, Kay

    2016-05-20

    The synthesis and characterization of novel cellulose sulfate derivatives was reported. Various cellulose ethers were prepared in a homogeneous reaction with common sulfating agents. The received product possess different properties in dependence on the reaction conditions like sulfating agent, solvent, reaction time and reaction temperature. The cellulose ether sulfates are all soluble in water, they rheological behavior could be determined by viscosity measurements and the determination of the sulfur content by elemental analysis lead to a resulting degree of substitution ascribed to sulfate groups (DSSul) of the product. A wide range of products from DSSul 0.1 to DSSul 2.7 will be obtained. Furthermore the cellulose sulfate ethers could be characterized by Raman spectroscopy. PMID:26917374

  7. Tandem Bond-Forming Reactions of 1-Alkynyl Ethers.

    PubMed

    Minehan, Thomas G

    2016-06-21

    Electron-rich alkynes, such as ynamines, ynamides, and ynol ethers, are functional groups that possess significant potential in organic chemistry for the formation of carbon-carbon bonds. While the synthetic utility of ynamides has recently been expanded considerably, 1-alkynyl ethers, which possess many of the reactivity features of ynamides, have traditionally been far less investigated because of concerns about their stability. Like ynamides, ynol ethers are relatively unhindered to approach by functional groups present in the same or different molecules because of their linear geometry, and they can potentially form up to four new bonds in a single transformation. Ynol ethers also possess unique reactivity features that make them complementary to ynamides. Research over the past decade has shown that ynol ethers formed in situ from stable precursors engage in a variety of useful carbon-carbon bond-forming processes. Upon formation at -78 °C, allyl alkynyl ethers undergo a rapid [3,3]-sigmatropic rearrangement to form allyl ketene intermediates, which may be trapped with alcohol or amine nucleophiles to form γ,δ-unsaturated carboxylic acid derivatives. The process is stereospecific, takes place in minutes at cryogenic temperatures, and affords products containing (quaternary) stereogenic carbon atoms. Trapping of the intermediate allyl ketene with carbonyl compounds, epoxides, or oxetanes instead leads to complex α-functionalized β-, γ-, or δ-lactones, respectively. [3,3]-Sigmatropic rearrangement of benzyl alkynyl ethers also takes place at temperatures ranging from -78 to 60 °C to afford substituted 2-indanones via intramolecular carbocyclization of the ketene intermediate. tert-Butyl alkynyl ethers containing pendant di- and trisubstituted alkenes and enol ethers are stable to chromatographic isolation and undergo a retro-ene/[2 + 2] cycloaddition reaction upon mild thermolysis (90 °C) to afford cis-fused cyclobutanones and donor

  8. Oxidative acetoxylation of the silyl ethers of ketone enols

    SciTech Connect

    Brunovlenskaya, I.I.; Kusainova, K.M.; Kashin, A.K.

    1988-07-20

    The authors studied the reaction of (dicarboxyiodo)benzenes with the trimethylsilyl ethers of ketone enols having various structures. They also undertook a comparative investigation of the oxidation of these compounds with lead tetraacetate. The reaction of (diacetoxyiodo)benzene with the trimethylsilyl ethers of ketone enols takes place with retention of the (CH/sub 3/)/sub 3/Si group in two directions, i.e., substitution of the vinylic hydrogen or diacetoxylation of the double bond. The reaction can be used for the regioselective synthesis of /alpha/-acetoxy ketones, since the trimethylsilyl group is readily eliminated from the obtained products by the action of fluoride ion or boron trifluoride etherate with the formation of the corresponding substituted ketones.

  9. Highly efficient palladium-catalyzed hydrostannation of ethyl ethynyl ether

    PubMed Central

    Andrews, Ian P.; Kwon, Ohyun

    2008-01-01

    The palladium-catalyzed hydrostannation of acetylenes is widely exploited in organic synthesis as a means of forming vinyl stannanes for use in palladium-catalyzed cross-coupling reactions. Application of this methodology to ethyl ethynyl ether results in an enol ether that is challenging to isolate from the crude reaction mixture because of incompatibility with typical silica gel chromatography. Reported here is a highly efficient procedure for the palladium-catalyzed hydrostannation of ethyl ethynyl ether using 0.1% palladium(0) catalyst and 1.0 equiv of tributyltin hydride. The product obtained is a mixture of regioisomers that can be carried forward with exclusive reaction of the β-isomer. This method is highly reproducible; relative to previously reported procedures, it is more economical and involves a more facile purification procedure. PMID:20011027

  10. Enzymatic network for production of ether amines from alcohols.

    PubMed

    Palacio, Cyntia M; Crismaru, Ciprian G; Bartsch, Sebastian; Navickas, Vaidotas; Ditrich, Klaus; Breuer, Michael; Abu, Rohana; Woodley, John M; Baldenius, Kai; Wu, Bian; Janssen, Dick B

    2016-09-01

    We constructed an enzymatic network composed of three different enzymes for the synthesis of valuable ether amines. The enzymatic reactions are interconnected to catalyze the oxidation and subsequent transamination of the substrate and to provide cofactor recycling. This allows production of the desired ether amines from the corresponding ether alcohols with inorganic ammonium as the only additional substrate. To examine conversion, individual and overall reaction equilibria were established. Using these data, it was found that the experimentally observed conversions of up to 60% observed for reactions containing 10 mM alcohol and up to 280 mM ammonia corresponded well to predicted conversions. The results indicate that efficient amination can be driven by high concentrations of ammonia and may require improving enzyme robustness for scale-up. Biotechnol. Bioeng. 2016;113: 1853-1861. © 2016 Wiley Periodicals, Inc. PMID:26915048

  11. Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes

    SciTech Connect

    Dae Sik, Kim; Yu Seung, Kim; Gilles, Robertson; Guiver, Michael D

    2009-01-01

    A copoly(arylene ether) (PAE) with high fluorine content and a copoly(arylene ether nitrile) (PAEN) with high nitrile content, each containing pendant phenyl sulfonic acids were synthesized. The PAE and P AEN were prepared from decafluorobiphenyl (DFBP) and difluorobenzonitrile (DFBN) respectively, by polycondensation with 2phenylhydroquinone (PHQ) by conventional aromatic nucleophilic substitution reactions. sulfonic acid groups were introduced by mild post-sulfonation exclusively on the para-position of the pendant phenyl ring in PHQ. The membrane properties of the resulting sulfonated copolymers sPAE and sPAEN were compared for fuel cell applications. The copolymers sPAE and sPAEN, each having a degree of sulfonation (OS) of 1.0 had high ion exchange capacities (IEC{sub v})(wet) (volume-based, wet state) of 1.77 and 2.55 meq./cm3, high proton conductivities of 135.4 and 140.1 mS/cm at 80 C, and acceptable volume-based water uptake of 44.5 -51.9 vol% at 80 C, respectively, compared to Nafion. The data points of these copolymer membranes are located in the upper left-hand corner in the trade-off plot of alternative hydrocarbon polyelectrolyte membranes (PEM) for the relationship between proton conductivity versus water uptake (weight based or volume based), i.e., high proton conductivity and low water uptake. Furthermore, the relative selectivity derived from proton conductivity and methanol permeability is higher than that of Nafion.

  12. Study of the mode of action of some nitrodiphenyl ethers.

    PubMed

    Piekarski, D; Potier, P; Giannotti, C

    1990-01-01

    Nitrosoderivatives of the nitrodiphenyl ether herbicides (nitrofen, bifenox) have been studied. UV irradiation in different organic solvents gives degradation products. In buffered aqueous media, in the presence of chloroplasts and spin traps such as DMPO, hydroxy and peroxy radicals have been characterized. In organic media and in the presence of spin traps such as DMPO, PBN, 4-POBN, solvent radicals (.CHCl2, .CCl3, .CH2 [symbol: see text]) have been formed. Nitro-derivatives have been studied under UV irradiation and in the presence of tetramethylethylene (TME), alkenylhydroxylamines are formed which autoxidize in nitroxide radicals. The formation of the stable nitroxide radical occurs in the dark process after continuous irradiation. The intensity of the signal decreases strongly when a new irradiation is applied. Radical species, with analogous ESR spectral characteristics are formed on reaction with nitrodiphenyl ethers and fatty acids. The reactivity of these herbicides in micellar media (SDS, Brij 35, and CTAB) has been investigated. The kinetics of formation of the ESR signal corresponding to the photoreduction of the nitrodiphenyl ether in the presence of TME behave differently in a micellar environment as compared to solution. The intensity of the formation of the nitroxide increases under irradiation and decreases in the dark; the rotational correlation time tau c has been determined for each type of micelle. Synthetic nitrosodiphenyl ether made by the reduction of nitrodiphenyl ether using hydrogen gas and PtO2 as a catalyst gives the corresponding amine, which is oxidized with meta-chloroperbenzoic acid (m.CPBA). The nitrosodiphenyl ether in the presence of soja azolectin liposome containing a fluorescent probe has been analysed.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2165990

  13. Supramolecular polymers constructed by crown ether-based molecular recognition.

    PubMed

    Zheng, Bo; Wang, Feng; Dong, Shengyi; Huang, Feihe

    2012-03-01

    Supramolecular polymers, polymeric systems beyond the molecule, have attracted more and more attention from scientists due to their applications in various fields, including stimuli-responsive materials, healable materials, and drug delivery. Due to their good selectivity and convenient enviro-responsiveness, crown ether-based molecular recognition motifs have been actively employed to fabricate supramolecular polymers with interesting properties and novel applications in recent years. In this tutorial review, we classify supramolecular polymers based on their differences in topology and cover recent advances in the marriage between crown ether-based molecular recognition and polymer science. PMID:22012256

  14. Extraction of actinides and nitric acid by crown ethers

    SciTech Connect

    Rozen, A.M.; Nikolotova, Z.I.; Kartasheva, N.A.; Luk'yanenko, N.G.; Bogatskii, A.V.

    1982-10-01

    This work studied the extraction of thorium nitrate, and an extraction isotherm of uranyl nitrate was obtained; the distribution of HNO/sub 3/ was studied over a wide range of acidity (up to 18M), which uses different concepts on the mechanism of the process. The extraction of Pu(VI) and Np(IV) was studied up to a 12 M acidity; two crown ethers had not previously been used for the extraction of the actinides. A quantitative description of the equilibria studied is given, and the influence of the structure of the ethers on the complex formation is discussed.

  15. Concise synthesis of ether analogues of lysobisphosphatidic acid.

    PubMed

    Jiang, Guowei; Xu, Yong; Falguières, Thomas; Gruenberg, Jean; Prestwich, Glenn D

    2005-09-01

    We describe a versatile, efficient method for the preparation of ether analogues of (S,S)-lysobisphosphatidic acid (LBPA) and its enantiomer from (S)-solketal. Phosphorylation of a protected sn-2-O-octadecenyl glyceryl ether with 2-cyanoethyl bis-N,N-diisopropylamino phosphine and subsequent deprotection generated the bisether LBPA analogues. By simply changing the sequence of deprotection steps, we obtained the (R,R)- and (S,S)-enantiomers of 2,2'-bisether LBPA. An ELISA assay with anti-LBPA monoclonal antibodies showed that the bisether LBPAs were recognized with the same affinity as the natural 2,2'-bisoleolyl LBPA. [reaction: see text] PMID:16119911

  16. Polymerization in the liquid crystalline state of vinyl ether monomers

    SciTech Connect

    Andersson, H.; Jonsson, H.; Gedde, U.W.; Hult, A.

    1993-12-31

    Liquid crystalline phenylbenzoate vinyl ether was polymerized cationically in both anisotropic and isotropic monomeric melts, using photochemical initiation by onium salts. High molecular mass polymers with a narrow molecular mass distribution (around 2) were produced by cationic polymerization at high temperatures ({<=}{degrees}C). The initial state of the monomer, nematic or isotropic, did not affect neither molecular mass, molecular mass distribution, nor polymerization rate. {sup 13}C-NMR studies show that the polymer formed is atactic. Ordered 30-50 {mu}m films were produced by polymerization of mesogenic vinyl ether monomers oriented in the nematic and smectic phase.

  17. Two Reaction Mechanisms via Iminium Ion Intermediates: The Different Reactivities of Diphenylprolinol Silyl Ether and Trifluoromethyl-Substituted Diarylprolinol Silyl Ether.

    PubMed

    Gotoh, Hiroaki; Uchimaru, Tadafumi; Hayashi, Yujiro

    2015-08-24

    The reactions of α,β-unsaturated aldehydes with cyclopentadiene in the presence of diarylprolinol silyl ethers as catalyst proceed via iminium cations as intermediates, and can be divided into two types; one involving a Michael-type reaction (type A) and one involving a cycloaddition (type B). Diphenylprolinol silyl ethers and trifluoromethyl-substituted diarylprolinol silyl ethers, which are widely used proline-type organocatalysts, have been investigated in this study. As the LUMO of the iminium ion derived from trifluoromethyl-substituted diarylprolinol silyl ether is lower in energy than that derived from diphenylprolinol silyl ether, as supported by ab initio calculations, the trifluoromethyl-substituted catalyst is more reactive in a type B reaction. The iminium ion from an α,β-unsaturated aldehyde is generated more quickly with diphenylprolinol silyl ether than with the trifluoromethyl-substituted diarylprolinol silyl ether. When the generation of the iminium ion is the rate-determining step, the diphenylprolinol silyl ether catalyst is the more reactive. Because acid accelerates the generation of iminium ions and reduces the generation of anionic nucleophiles in the Michael-type reaction (type A), it is necessary to select the appropriate acid for specific reactions. In general, diphenylprolinol silyl ether is a superior catalyst for type A reactions, whereas the trifluoromethyl-substituted diarylprolinol silyl ether catalyst is preferred for type B reactions. PMID:26096559

  18. Aliphatic polycarbonates based on carbon dioxide, furfuryl glycidyl ether, and glycidyl methyl ether: reversible functionalization and cross-linking.

    PubMed

    Hilf, Jeannette; Scharfenberg, Markus; Poon, Jeffrey; Moers, Christian; Frey, Holger

    2015-01-01

    Well-defined poly((furfuryl glycidyl ether)-co-(glycidyl methyl ether) carbonate) (P((FGE-co-GME)C)) copolymers with varying furfuryl glycidyl ether (FGE) content in the range of 26% to 100% are prepared directly from CO2 and the respective epoxides in a solvent-free synthesis. All materials are characterized by size-exclusion chromatography (SEC), (1)H NMR spectroscopy, and differential scanning calorimetry (DSC). The furfuryl-functional samples exhibit monomodal molecular weight distributions with Mw/Mn in the range of 1.16 to 1.43 and molecular weights (Mn) between 2300 and 4300 g mol(-1). Thermal properties reflect the amorphous structure of the polymers. Both post-functionalization and cross-linking are performed via Diels-Alder chemistry using maleimide derivatives, leading to reversible network formation. This transformation is shown to be thermally reversible at 110 °C. PMID:25407342

  19. High octane ethers from synthesis gas-derived alcohols. Technical progress report, October--December 1991

    SciTech Connect

    Klier, K.; Herman, R.G.; Johansson, M.; Feeley, O.C.

    1992-01-01

    The objective of the proposed research is to synthesize high octane ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from H{sub 2}/CO/CO{sub 2} coal-derived synthesis gas via alcohol mixtures that are rich in methanol and 2-methyl-1-propanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers.

  20. 40 CFR 721.1580 - Disubstituted benzene ether, polymer with substituted phenol (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Disubstituted benzene ether, polymer... Significant New Uses for Specific Chemical Substances § 721.1580 Disubstituted benzene ether, polymer with... chemical substance generically identified as disubstituted benzene ether, polymer with substituted...

  1. 40 CFR 721.1580 - Disubstituted benzene ether, polymer with substituted phenol (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Disubstituted benzene ether, polymer... Significant New Uses for Specific Chemical Substances § 721.1580 Disubstituted benzene ether, polymer with... chemical substance generically identified as disubstituted benzene ether, polymer with substituted...

  2. 40 CFR 721.1580 - Disubstituted benzene ether, polymer with substituted phenol (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Disubstituted benzene ether, polymer... Significant New Uses for Specific Chemical Substances § 721.1580 Disubstituted benzene ether, polymer with... chemical substance generically identified as disubstituted benzene ether, polymer with substituted...

  3. 40 CFR 721.9952 - Alkoxylated aliphatic diisocyanate allyl ether (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... allyl ether (generic). 721.9952 Section 721.9952 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.9952 Alkoxylated aliphatic diisocyanate allyl ether... identified generically as alkoxylated aliphatic diisocyanate allyl ether (PMN P-00-0353) is subject...

  4. 40 CFR 721.9952 - Alkoxylated aliphatic diisocyanate allyl ether (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... allyl ether (generic). 721.9952 Section 721.9952 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.9952 Alkoxylated aliphatic diisocyanate allyl ether... identified generically as alkoxylated aliphatic diisocyanate allyl ether (PMN P-00-0353) is subject...

  5. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ether (generic). 721.3845 Section 721.3845 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3845 Alkyl substituted aromatic glycidyl ether (generic). (a) Chemical... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under...

  6. 40 CFR 721.3845 - Alkyl substituted aromatic glycidyl ether (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ether (generic). 721.3845 Section 721.3845 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.3845 Alkyl substituted aromatic glycidyl ether (generic). (a) Chemical... as alkyl substituted aromatic glycidyl ether (PMN P-97-661) is subject to reporting under...

  7. Catalytic cleavage of ether C-O bonds by pincer iridium complexes.

    PubMed

    Haibach, Michael C; Lease, Nicholas; Goldman, Alan S

    2014-09-15

    The development of efficient catalytic methods to cleave the relatively unreactive C-O bonds of ethers remains an important challenge in catalysis. Building on our group's recent work, we report the dehydroaryloxylation of aryl alkyl ethers using pincer iridium catalysts. This method represents a rare fully atom-economical method for ether C-O bond cleavage. PMID:25060043

  8. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs...

  9. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs...

  10. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs...

  11. 40 CFR 721.1580 - Disubstituted benzene ether, polymer with substituted phenol (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Disubstituted benzene ether, polymer... Significant New Uses for Specific Chemical Substances § 721.1580 Disubstituted benzene ether, polymer with... chemical substance generically identified as disubstituted benzene ether, polymer with substituted...

  12. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs...

  13. 40 CFR 721.1580 - Disubstituted benzene ether, polymer with substituted phenol (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Disubstituted benzene ether, polymer... Significant New Uses for Specific Chemical Substances § 721.1580 Disubstituted benzene ether, polymer with... chemical substance generically identified as disubstituted benzene ether, polymer with substituted...

  14. 40 CFR 721.10017 - Amine terminated bisphenol A diglycidyl ether polymer (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... diglycidyl ether polymer (generic). 721.10017 Section 721.10017 Protection of Environment ENVIRONMENTAL... ether polymer (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as amine terminated bisphenol A diglycidyl ether polymer (PMNs...

  15. Cathodic delaminations of poly(phenyl ether ether ketone) (PEEK) coatings overlaid on zinc phosphate-deposited steels

    SciTech Connect

    Sugama, T.; Carciello, N.R. . Dept. of Applied Science)

    1993-12-10

    The melt-crystallized poly(phenyl) ether ether ketone (PEEK) polymer was overlaid on crystalline zinc phosphate (Zn [center dot] Ph) conversion coating-deposited and nondeposited cold-rolled steels at 400 C in air or in N[sub 2] environments. The ability of these coatings systems to protect the steel against corrosion was evaluated from the rate of cathodic delamination of the coating layer from the steel. Because the cathodic reaction, H[sub 2]O + 1/20[sub 2] + 2e[sup [minus

  16. State of water in hybrid sulfonated poly(ether ether ketone) - silica membranes by 1H solid-state NMR

    NASA Astrophysics Data System (ADS)

    Baias, Maria; Demco, Dan E.; Blümich, Bernhard; Möller, Martin

    2009-04-01

    The state of water in fully hydrated sulfonated poly(ether ether ketone) - silica hybrid proton exchange membranes were characterized in terms of the exchange rate between bound and free water, the water dynamics in each phase, and the relative water populations by 1H ODESSA and transverse magnetization relaxation NMR. The exchange rate, the amount of bound water, and the reorientation of free water molecules increase in the presence of silica particles. The dynamics of bound water was described by the Lévy statistics with a Cauchy propagator. The proton exchange membranes performances could be improved by addition of small concentrations of silica in the range of 5-10 wt.%.

  17. A high performance semi-crystalline electrostatic stabilizer for aqueous dispersion prepregging: Poly(pyridine ether-co-ether ether ketone)

    SciTech Connect

    Brink, A.E.; Lin, M.C.; Riffle, J.S. |

    1993-12-31

    Aqueous dispersion prepregging is a relatively new, alternate method for processing polymer matrix composites, which could potentially circumvent many of the environmental and processing problems prominent in melt or solution prepregging. However, this method requires the high performance thermoplastic matrix resin to be in the form of small particles dispersed in a stable aqueous suspension. The preparation of submicron particles of the high performance semicrystalline poly(ether ether ketone) has previously been reported (Polymer, accepted 1992). Suspensions of these particles in water were demonstrated, but the suspending agents used were not thermally stable materials. This paper discusses the development of a high performance stabilizer which can be used for suspending PEEK particles in water (forming stable colloids), thereby facilitating the development of processes for aqueous dispersion prepegging. The stabilizer is a copolymer formed from 4,4`-difluoro (N-benzohydroxylidene aniline), 2,6-dichloropyridine, and hydroquinone.

  18. 2,2\\',4,4\\',5-Pentabromodiphenyl ether (BDE-99)

    Integrated Risk Information System (IRIS)

    EPA / 635 / R - 07 / 006F www.epa.gov / iris TOXICOLOGICAL REVIEW OF 2,2 ' , 4,4 ' , 5 - PENTABROMODIPHENYL ETHER ( BDE - 99 ) ( CAS No . 60348 - 60 - 9 ) In Support of Summary Information on the Integrated Risk Information System ( IRIS ) June 2008 U.S . Environmental Protection Agency Washington ,

  19. 29 CFR 1915.1008 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false bis-Chloromethyl ether. 1915.1008 Section 1915.1008 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Toxic and Hazardous...

  20. 29 CFR 1910.1008 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 6 2010-07-01 2010-07-01 false bis-Chloromethyl ether. 1910.1008 Section 1910.1008 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

  1. 29 CFR 1910.1006 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 6 2010-07-01 2010-07-01 false Methyl chloromethyl ether. 1910.1006 Section 1910.1006 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and...

  2. 29 CFR 1915.1006 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Methyl chloromethyl ether. 1915.1006 Section 1915.1006 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Toxic...

  3. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether.

    PubMed

    Stenger-Smith, John D; Baldwin, Lawrence; Chafin, Andrew; Goodman, Paul A

    2016-08-01

    Invited for this month's cover are researchers from the Naval Air Warfare Center Weapons Division (USA). The cover picture shows the elusive symmetric molecule bis (tetrahydrofurfuryl) ether (BTHFE) in the making. For more details, read the full text of the Communication at 10.1002/open.201600013. PMID:27547633

  4. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227) is..., and consumer activities. Requirements as specified in § 721.80(h). (b) Specific requirements. The... 721.3500 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC...

  5. 40 CFR 721.3500 - Perhalo alkoxy ether.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... reporting. (1) The chemical substance identified generically as perhalo alkoxy ether (PMN P-83-1227) is..., and consumer activities. Requirements as specified in § 721.80(h). (b) Specific requirements. The... 721.3500 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC...

  6. AVOIDING HYDROLYSIS OF FUEL ETHER OXYGENATES DURING STATIC HEADSPACE ANALYSIS

    EPA Science Inventory

    A headspace autosampler, gas chromatograph and ion trap mass spectrometer (headspace GC/MS) were used for trace analysis of fuel oxygenates and related compounds and aromatics in water. A method has been developed for determination of methyl tert-butyl ether (MTBE), ethyl tert-b...

  7. IRIS Toxicological Review of Pentabromodiphenyl Ether (Final Report)

    EPA Science Inventory

    The purpose of this Toxicological Review is to provide scientific support and rationale for the hazard and dose-response assessment in IRIS pertaining to chronic exposure to 2,2',4,4',5-pentabromodiphenyl ether. It is not intended to be a comprehensive treatise on the chemical...

  8. FLUORINATED ETHERS--A NEW FAMILY OF HALONS?

    EPA Science Inventory

    The paper discusses the possiblity of fluorinated ethers' being a new family of halons. or at the University of Tennessee to find suitable replacements for fully halogenated chlorofluorocarbons (CFCs) and halons has centered on the incorporation of oxygen as a heteroatom. he most...

  9. 45. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, CONTROL PANEL LEVEL (2ND DECK), LOOKING AT 'MIXED SOLVENT UNIT' CONTROL PANEL (LOOKING EAST). - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  10. 43. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, NORTH WING, 1ST LEVEL, LOOKING SOUTHWEST AT EQUIPMENT USED TO CONDENSE SOLVENT VAPORS TRANSMITTED BY SOLVENT RECOVERY DUCT FROM BUILDING NO. 527. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  11. 42. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. BUILDING NO. 519, ETHER AND ALCOHOL RECOVERY HOUSE, INTERIOR, NORTH WING, 1ST LEVEL, VIEW OF FILTERS AND BLOWERS FOR SOLVENT VAPORS FROM BUILDING NO. 527. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  12. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether

    PubMed Central

    Stenger‐Smith, John D.; Baldwin, Lawrence; Chafin, Andrew

    2016-01-01

    Abstract Invited for this month's cover are researchers from the Naval Air Warfare Center Weapons Division (USA). The cover picture shows the elusive symmetric molecule bis(tetrahydrofurfuryl) ether (BTHFE) in the making. For more details, read the full text of the Communication at 10.1002/open.201600013. PMID:27547633

  13. [Antibacterial action of ether oils of some plants].

    PubMed

    Khaldun, A O

    2006-01-01

    Inhibitory effect of clove oil on Escherichia coli, Staphylococcus aureus, Salmonella typhimurium, Shigella dysenteriae and Candida albicans was detected. Mint ether oil had the high antibacterial action on S. aureus, however against other microorganisms mint oil had a reliably low effect then clove oil. Fennel oil had high antibacterial effect on C. albicans, and bactericidal action on S. typhimurium and S. dysenteriae. PMID:16830599

  14. Methyl substituted polyimides containing carbonyl and ether connecting groups

    NASA Technical Reports Server (NTRS)

    Hergenrother, Paul M. (Inventor); Havens, Stephen J. (Inventor)

    1992-01-01

    Polyimides were prepared from the reaction of aromatic dianhydrides with novel aromatic diamines having carbonyl and ether groups connecting aromatic rings containing pendant methyl groups. The methyl substituent polyimides exhibit good solubility and form tough, strong films. Upon exposure to ultraviolet irradiation and/or heat, the methyl substituted polyimides crosslink to become insoluble.

  15. Structure-property study of keto-ether polyimides

    NASA Technical Reports Server (NTRS)

    Dezern, James F.; Croall, Catharine I.

    1991-01-01

    As part of an on-going effort to develop an understanding of how changes in the chemical structure affect polymer properties, an empirical study was performed on polyimides containing only ether and/or carbonyl connecting groups in the polymer backbone. During the past two decades the structure-property relationships in linear aromatic polyimides have been extensively investigated. More recently, work has been performed to study the effect of isomeric attachment of keto-ether polyimides on properties such as glass transition temperature and solubility. However, little work has been reported on the relation of polyimide structure to mechanical properties. The purpose of this study was to determine the effect of structural changes in the backbone of keto-ether polyimides on their mechanical properties, specifically, unoriented thin film tensile properties. This study was conducted in two stages. The purpose of the initial stage was to examine the physical and mechanical properties of a representative group (four) of polyimide systems to determine the optimum solvent and cure cycle requirements. These optimum conditions were then utilized in the second stage to prepare films of keto-ether polyimides which were evaluated for mechanical and physical properties. All of the polyimides were prepared using isomers of oxydianiline (ODA) and diaminobenzophenone (DABP) in combination with 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA) and 4,4'-oxydiphthalic anhydride (ODPA).

  16. Selective, nickel-catalyzed hydrogenolysis of aryl ethers.

    PubMed

    Sergeev, Alexey G; Hartwig, John F

    2011-04-22

    Selective hydrogenolysis of the aromatic carbon-oxygen (C-O) bonds in aryl ethers is an unsolved synthetic problem important for the generation of fuels and chemical feedstocks from biomass and for the liquefaction of coal. Currently, the hydrogenolysis of aromatic C-O bonds requires heterogeneous catalysts that operate at high temperature and pressure and lead to a mixture of products from competing hydrogenolysis of aliphatic C-O bonds and hydrogenation of the arene. Here, we report hydrogenolyses of aromatic C-O bonds in alkyl aryl and diaryl ethers that form exclusively arenes and alcohols. This process is catalyzed by a soluble nickel carbene complex under just 1 bar of hydrogen at temperatures of 80 to 120°C; the relative reactivity of ether substrates scale as Ar-OAr>Ar-OMe>ArCH(2)-OMe (Ar, Aryl; Me, Methyl). Hydrogenolysis of lignin model compounds highlights the potential of this approach for the conversion of refractory aryl ether biopolymers to hydrocarbons. PMID:21512027

  17. Synthesis and antitubercular activity of heterocycle substituted diphenyl ether derivatives

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Despite being an ancient disease, tuberculosis (TB) remains the leading single-agent infectious disease killer in the world. The emerging serious problem due to TB control and clinical management prompted us to synthesize novel series of heterocyclic substituted diphenyl ether derivatives and determ...

  18. Mode of Action Studies on Nitrodiphenyl Ether Herbicides

    PubMed Central

    Bowyer, John R.; Smith, Beverly J.; Camilleri, Patrick; Lee, Susan A.

    1987-01-01

    5-[2-Chloro-4-(trifluoromethyl)phenoxy]-2-nitroacetophenone oxime-o-(acetic acid, methyl ester) (DPEI), is a potent nitrodiphenyl ether herbicide which causes rapid leaf wilting, membrane lipid peroxidation, and chlorophyll destruction in a process which is both light- and O2-dependent. These effects resemble those of other nitrodiphenyl ether herbicides. Unlike paraquat, the herbicidal effects of DPEI are only slightly reduced by pretreatment with the photosynthetic electron transport inhibitor 3-(3,4-dichlorophenyl)-1,1-dimethylurea. DPEI is a weak inhibitor of photosynthetic electron transport (I50 15 micromolar for water to paraquat) in vitro, with at least one site of action at the cytochrome b6f complex. Ultrastructural studies and measurements of ethane formation resulting from lipid peroxidation indicate that mutants of barley lacking photosystem I (PSI) (viridis-zb63) or photosystem II (viridis-zd69) are resistant to paraquat but susceptible to DPEI. The results indicate that electron transfer through both photosystems is not essential for the toxic effects of nitrodiphenyl ether herbicides. Furthermore, the results show that neither cyclic electron transport around PSI, nor the diversion of electrons from PSI to O2 when NADPH consumption is blocked are essential for the phytotoxicity of nitrodiphenyl ether herbicides. Images Fig. 2 Fig. 3 Fig. 4 PMID:16665297

  19. Antiknock evaluation of hydrocarbons and ethers as aviation fuel components

    NASA Technical Reports Server (NTRS)

    Barnett, Henry C

    1950-01-01

    The results of a NACA investigation conducted over a period of several years to evaluate the anti-knock characteristics of organic compounds are summarized. Included are data for 18 branched paraffins and olefins, 27 aromatics, and 22 ethers. The factors of performance investigated were blending characteristics, temperature sensitivity, lead response, and relation between molecular structure and antiknock ratings. Four engines were used.

  20. POLYBROMINATED DIPHENYL ETHERS (PBDES) IN AMERICAN MOTHERS' MILK

    EPA Science Inventory

    No previous reports exist on polybrominated diphenyl ether (PBDE) congeners in individual American mothers' milk. This report on PBDEs is an extension of our previous studies on concentrations of dioxins, dibenzofurans, PCBs, and other chlorinated organics in human milk in a num...

  1. 2,2\\',4,4\\'-Tetrabromodiphenyl ether (BDE-47)

    Integrated Risk Information System (IRIS)

    2,2 ' , 4,4 ' - Tetrabromodiphenyl ether ( BDE - 47 ) ; CASRN 5436 - 43 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health H

  2. The epistemic view of quantum states and the ether

    NASA Astrophysics Data System (ADS)

    Marchildon, L.

    2006-06-01

    The idea that the wave function represents information, or knowledge, rather than the state of a microscopic object has been held to solve foundational problems of quantum mechanics. Realist interpretation schemes, like Bohmian trajectories, have been compared to the ether in prerelativistic theories. I argue that the comparison is inadequate, and that the epistemic view of quantum states begs the question of interpretation.

  3. The ether lipid-deficient mouse: tracking down plasmalogen functions.

    PubMed

    Gorgas, Karin; Teigler, Andre; Komljenovic, Dorde; Just, Wilhelm W

    2006-12-01

    Chemical and physico-chemical properties as well as physiological functions of major mammalian ether-linked glycerolipids, including plasmalogens were reviewed. Their chemical structures were described and their effect on membrane fluidity and membrane fusion discussed. The recent generation of mouse models with ether lipid deficiency offered the possibility to study ether lipid and particularly plasmalogen functions in vivo. Ether lipid-deficient mice revealed severe phenotypic alterations, including arrest of spermatogenesis, development of cataract and defects in central nervous system myelination. In several cell culture systems lack of plasmalogens impaired intracellular cholesterol distribution affecting plasma membrane functions and structural changes of ER and Golgi cisternae. Based on these phenotypic anomalies that were accurately described conclusions were drawn on putative functions of plasmalogens. These functions were related to cell-cell or cell-extracellular matrix interactions, formation of lipid raft microdomains and intracellular cholesterol homeostasis. There are several human disorders, such as Zellweger syndrome, rhizomelic chondrodysplasia punctata, Alzheimer's disease, Down syndrome, and Niemann-Pick type C disease that are distinguished by altered tissue plasmalogen concentrations. The role plasmalogens might play in the pathology of these disorders is discussed. PMID:17027098

  4. Photoinitiated cationic polymerization with multifunctional vinyl ether monomers

    SciTech Connect

    Cribello, J.V.; Lee, J.L.; Conlon, D.A.

    1983-01-01

    Until recently, multifunctional vinyl ether monomers have not been employed in UV curing applications. The recent discovery of diaryliodonium and triarylsulfonium salts as new classes of photoinitiators for cationic polylmerization has made it possible to formulate highly photosensitive UV curable coatings based on these monomers. The syntheses of these monomers and their reactivity as a function of their structure is reviewed and evaluated.

  5. Condensation of perfluoroisobutylene with perfluorinated vinyl alkyl ethers

    SciTech Connect

    Postovoi, S.A.; Zeifman, Yu.V.; Knunyants, I.L.

    1986-12-10

    Condensation of perfluoroisobutylene with perfluorovinyl aklyl ethers with CsF catalysis takes place according to a scheme of concerted nucleophilic addition, with participation of the perfluoro-tert-butyl anion as nucleophile and perfluoroisobutylene as electrophile. In the presence of CO/sub 2/ the product of concerted perfluoroalkylcarboxylation forms.

  6. IRIS Toxicological Review and Summary Documents for Polybrominated Diphenyl Ethers

    EPA Science Inventory

    EPA has announced the release of four completed toxicologal reviews and summary documents following an independent peer review on the scientific basis supporting the human health hazard and dose-response assessments of four congeners of polybrominated diphenyl ethers: tetraBDE (B...

  7. 40 CFR 721.10669 - Tertiary amine alkyl ether (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Tertiary amine alkyl ether (generic). 721.10669 Section 721.10669 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10669...

  8. 40 CFR 721.10669 - Tertiary amine alkyl ether (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Tertiary amine alkyl ether (generic). 721.10669 Section 721.10669 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10669...

  9. 40 CFR 721.825 - Certain aromatic ether diamines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.825 Certain aromatic ether diamines. (a) Chemical substances and significant new uses subject to reporting. (1) The following chemical substances are subject to reporting under this...

  10. Aqueous alkali metal hydroxide insoluble cellulose ether membrane

    NASA Technical Reports Server (NTRS)

    Hoyt, H. E.; Pfluger, H. L. (Inventor)

    1969-01-01

    A membrane that is insoluble in an aqueous alkali metal hydroxide medium is described. The membrane is a resin which is a water-soluble C2-C4 hydroxyalkyl cellulose ether polymer and an insolubilizing agent for controlled water sorption, a dialytic and electrodialytic membrane. It is particularly useful as a separator between electrodes or plates in an alkaline storage battery.

  11. Li-air batteries having ether-based electrolytes

    DOEpatents

    Amine, Khalil; Curtiss, Larry A; Lu, Jun; Lau, Kah Chun; Zhang, Zhengcheng; Sun, Yang-Kook

    2015-03-03

    A lithium-air battery includes a cathode including a porous active carbon material, a separator, an anode including lithium, and an electrolyte including a lithium salt and polyalkylene glycol ether, where the porous active carbon material is free of a metal-based catalyst.

  12. 29 CFR 1910.1008 - bis-Chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 6 2011-07-01 2011-07-01 false bis-Chloromethyl ether. 1910.1008 Section 1910.1008 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

  13. 29 CFR 1910.1006 - Methyl chloromethyl ether.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 6 2011-07-01 2011-07-01 false Methyl chloromethyl ether. 1910.1006 Section 1910.1006 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and...

  14. Comparative acute and subchronic toxicity of ethylene glycol monopropyl ether and ethylene glycol monopropyl ether acetate.

    PubMed Central

    Katz, G V; Krasavage, W J; Terhaar, C J

    1984-01-01

    The acute toxicity of ethylene glycol monopropyl ether (EGPE) and ethylene glycol monopropyl ether acetate (EGPEA) was determined in a series of standardized tests. The oral LD50 in rats was 3089 and 9456 mg/kg EGPE and EGPEA, respectively. Skin irritation was slight following an occluded single dose application of either compound to the guinea pig abdomen. The dermal LD50 for guinea pigs was 1 to 5 mL/kg and greater than 20 mL/kg EGPE and EGPEA, respectively. EGPE produced a very weak positive sensitization response in one of five guinea pigs. No positive response was elicited when 10 guinea pigs were similarly challenged with EGPEA. EGPE produced transient moderate to severe eye irritation in rabbits while EGPEA produced slight eye irritation. Subchronic toxicity was determined in a series of oral and inhalation studies. Groups of 10 male rats were dosed with 15, 7.5, 3.75 or 1.88 mmole/kg EGPE and 30, 15 or 7.5 mmole/kg EGPEA by gavage 5 days/week for 6 weeks. Hemoglobinuria was seen at least once at all dose levels of both compounds. EGPE had little effect on feed consumption or body weight gain, while body weight gain was reduced in the two high dose groups exposed to EGPEA and feed consumption was reduced at all dose levels. Hematologic changes were seen at all dose levels of both compounds. Absolute and/or relative spleen weights were increased at all but the lowest EGPE dose level and at all EGPEA dose levels. Gross and histopathologic examinations revealed significant effects on the spleen of animals exposed to EGPE and on the spleen, liver, kidney and testes of animals exposed to EGPEA. The no-observed effect level (NOEL) for splenic changes was 1.88 mmole/kg EGPE. A NOEL for hematology was not established. The NOEL for liver and testicular changes were 15 and 7.5 mmole/kg EGPEA, respectively while a NOEL for hematologic, splenic and renal changes was not established. Groups of 10 rats (5M, 5F) were exposed to 800, 400, 200 or 100 ppm EGPE or EGPEA 6 hr

  15. Toluene 2-Monooxygenase-Dependent Growth of Burkholderia cepacia G4/PR1 on Diethyl Ether

    PubMed Central

    Hur, H.; Newman, L. M.; Wackett, L. P.; Sadowsky, M. J.

    1997-01-01

    Aerobic bacterial growth on aromatic hydrocarbons typically requires oxygenase enzymes, which are known to fortuitously oxidize nongrowth substrates. In this study, we found that oxidation of diethyl ether by toluene 2-monooxygenase supported more rapid growth of Burkholderia cepacia G4/PR1 than did the aromatic substrates n-propylbenzene and o-xylene. The wild-type Burkholderia cepacia G4 failed to grow on diethyl ether. Purified toluene 2-monooxygenase protein components oxidized diethyl ether stoichiometrically to ethanol and acetaldehyde. Butyl methyl ether, diethyl sulfide, and 2-chloroethyl ethyl ether were oxidized by B. cepacia G4/PR1. PMID:16535583

  16. A gemini quaternary ammonium poly (ether ether ketone) anion-exchange membrane for alkaline fuel cell: design, synthesis, and properties.

    PubMed

    Si, Jiangju; Lu, Shanfu; Xu, Xin; Peng, Sikan; Xiu, Ruijie; Xiang, Yan

    2014-12-01

    To reconcile the tradeoff between conductivity and dimensional stability in AEMs, a novel Gemini quaternary ammonium poly (ether ether ketone) (GQ-PEEK) membrane was designed and successfully synthesized by a green three-step procedure that included polycondensation, bromination, and quaternization. Gemini quaternary ammonium cation groups attached to the anti-swelling PEEK backbone improved the ionic conductivity of the membranes while undergoing only moderate swelling. The grafting degree (GD) of the GQ-PEEK significantly affected the properties of the membranes, including their ion-exchange capacity, water uptake, swelling, and ionic conductivity. Our GQ-PEEK membranes exhibited less swelling (≤ 40 % at 25-70 °C, GD 67 %) and greater ionic conductivity (44.8 mS cm(-1) at 75 °C, GD 67 %) compared with single quaternary ammonium poly (ether ether ketone). Enhanced fuel cell performance was achieved when the GQ-PEEK membranes were incorporated into H2 /O2 single cells. PMID:25346412

  17. Use of fluorinated polybrominated diphenyl ethers and simplified cleanup for the analysis of polybrominated diphenyl ethers in house dust

    EPA Science Inventory

    A simple, cost-effective method is described for the analysis of polybrominated diphenyl ethers (PBDEs) in house dust using pressurized fluid extraction, cleanup with modified silica solid phase extraction tubes, and fluorinated internal standards. There are 14 PBDE congeners inc...

  18. Steady-state boundary lubrication with formulated C-ethers to 260 C

    NASA Technical Reports Server (NTRS)

    Loomis, W. R.

    1981-01-01

    Steady state wear and friction studies were made at boundary lubrication conditions in a pin on disk (pure iron on rotating CVM M 50 steel) sliding friction apparatus with five C ether formulated fluids (modified polyphenyl ether containing phosphrous ester, organic acid, and other additives). Conditions included 20, 150, and 260 C disk temperatures, dry air test atmosphere, 1 kilogram load, 50 rpm disk speed, and test times to 130 minutes. Results were compared with those obtained with a formulated MIL L 27502 candidate ester and the C ether base fluid. Three of the C ether formulations gave better lubrication than both reference fluids under most conditions. The other two C ether formulations yielded higher wear rates and friction coefficients than the C ether base fluid for most of the temperature range. Only one C ether formulation showed consistently higher steady state wear rates than the ester.

  19. A Caenorhabditis elegans model for ether lipid biosynthesis and function[S

    PubMed Central

    Shi, Xun; Tarazona, Pablo; Brock, Trisha J.; Browse, John; Feussner, Ivo; Watts, Jennifer L.

    2016-01-01

    Ether lipids are widespread in nature, and they are structurally and functionally important components of membranes. The roundworm, Caenorhabditis elegans, synthesizes numerous lipid species containing alkyl and alkenyl ether bonds. We isolated C. elegans strains carrying loss-of-function mutations in three genes encoding the proteins required for the initial three steps in the ether lipid biosynthetic pathway, FARD-1/FAR1, ACL-7/GNPAT, and ADS-1/AGPS. Analysis of the mutant strains show that they lack ether lipids, but possess the ability to alter their lipid composition in response to lack of ether lipids. We found that increases in de novo fatty acid synthesis and reduction of stearoyl- and palmitoyl-CoA desaturase activity, processes that are at least partially regulated transcriptionally, mediate the altered lipid composition in ether lipid-deficient mutants. Phenotypic analysis demonstrated the importance of ether lipids for optimal fertility, lifespan, survival at cold temperatures, and resistance to oxidative stress.Caenorhabditis PMID:26685325

  20. Amorphous phase separation in crystallizable polymer blends based on poly (aryl ether ketones) and poly (ether imide)

    SciTech Connect

    Kalika, D.S.; Bristow, J.F.

    1996-12-31

    The morphology of a series of miscible crystallizable blends based on poly (aryl ether ketones) [PAEK] and poly (ether imide) [PEI] has been investigated as a function of blend composition and crystallization condition by dielectric relaxation spectroscopy. For blends of poly (ether ether ketone) [PEEK] and PEI, dielectric scans of the crystallized samples reveal two glass-rubber relaxations corresponding to the coexistence of a mixed interlamellar amorphous phase, and a pure PEI phase located in interfibrillar/interspherulitic regions. The exclusion of a significant fraction of PEI outside of the crystal lamellae reflects a fundamental change in the nature of interaction between the interlamellar PEEK segments and the PEI chains owing to the constraints imposed on the PEEK segments by the crystal surfaces. The degree of PEI exclusion is dependent upon kinetic factors, i.e. the rate of PEEK crystallization relative to the rate of PEI diffusion away from the advancing crystal front. As a result, lower crystallization temperatures lead to an increase in the amount of PEI trapped in the interlamellar regions. In this work, the morphological characteristics of the PEEK/PEI blends are compared with those of blends comprised of poly (ether ketone ketone) [PEKK] and PEI. The introduction of the {open_quotes}kinked{close_quote} isophthalate moiety in the PEKK backbone has been shown to disrupt the persistence of order at the crystal-amorphous interface, and thereby leads to a reduction in the degree of constraint imposed by the crystal lamellae on the amorphous (interlamellar) PEKK segments. The impact of this reduction in crystalline constraint on the nature of the PEKK/PEI intersegmental interactions and the corresponding PEI segregation is discussed.

  1. Coal liquefaction model studies: free radical chain decomposition of diphenylpropane, dibenzyl ether, and phenyl ether via. beta. -scission reactions

    SciTech Connect

    Gilbert, K.E.; Gajewski, J.J.

    1982-01-01

    The thermal decompositions of 1,3-diphenylpropane (1), dibenzyl ether (2), and phenethyl phenyl ether (3) have been found to proceed by free radical chain processes. 1 gave toluene and styrene with a reaction order of 1.55, E/sub A/ = 51.4 kcal/mol, and log A = 12.5. The reaction could be initiated by benzyl phenyl ether but not by 1,2-diphenylethane. 2 gave toluene and benzaldehyde with a reaction order of 1.43, E/sub A/ = 48 kcal/mol, and log A = 12.6. The reaction could be initiated with benzyl phenyl ether. 3 gave phenol and styrene with a reaction order of 1.21, E/sub A/ = 50.3 kcal/mol, and log A = 12.3. The reaction could be initiated by benzyl phenyl ether. All of the data are consistent with free radical chain processes with the reaction order determined by the termination reaction. No evidence for concerted reactions has been found. The thermal chemistry of three-atom links is best described by free radical chain processes. The products are consistent with a free radical chain process involving a ..beta..-scission reaction, and the reaction orders range between first and three-halves order depending upon the nature of the chain termination reaction. Activation parameters are readily estimated from thermochemical kinetic data on the individual reactions with log A approx. = 12 and E/sub A/approx. = 50 kcal/mol. Unlike the one- and two-atom linkages, reactions of the three-atom linkages are promoted by free radical initiators. The potential for inhibition of free radical chains also exists and is currently being studied. 4 tables.

  2. Biodegradation of the gasoline oxygenates methyl tert-butyl ether, ethyl tert-butyl ether, and tert-amyl methyl ether by propane-oxidizing bacteria.

    PubMed Central

    Steffan, R J; McClay, K; Vainberg, S; Condee, C W; Zhang, D

    1997-01-01

    Several propane-oxidizing bacteria were tested for their ability to degrade gasoline oxygenates, including methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), and tert-amyl methyl ether (TAME). Both a laboratory strain and natural isolates were able to degrade each compound after growth on propane. When propane-grown strain ENV425 was incubated with 20 mg of uniformly labeled [14C]MTBE per liter, the strain converted > 60% of the added MTBE to 14CO2 in < 30 h. The initial oxidation of MTBE and ETBE resulted in the production of nearly stoichiometric amounts of tert-butyl alcohol (TBA), while the initial oxidation of TAME resulted in the production of tert-amyl alcohol. The methoxy methyl group of MTBE was oxidized to formaldehyde and ultimately to CO2. TBA was further oxidized to 2-methyl-2-hydroxy-1-propanol and then 2-hydroxy isobutyric acid; however, neither of these degradation products was an effective growth substrate for the propane oxidizers. Analysis of cell extracts of ENV425 and experiments with enzyme inhibitors implicated a soluble P-450 enzyme in the oxidation of both MTBE and TBA. MTBE was oxidized to TBA by camphor-grown Pseudomonas putida CAM, which produces the well-characterized P-450cam, but not by Rhodococcus rhodochrous 116, which produces two P-450 enzymes. Rates of MTBE degradation by propane-oxidizing strains ranged from 3.9 to 9.2 nmol/min/mg of cell protein at 28 degrees C, whereas TBA was oxidized at a rate of only 1.8 to 2.4 nmol/min/mg of cell protein at the same temperature. PMID:9361407

  3. Catalytic and electrocatalytic hydrogenolysis of brominated diphenyl ethers.

    PubMed

    Bonin, Pascale M L; Edwards, Patrick; Bejan, Dorin; Lo, Chun Chi; Bunce, Nigel J; Konstantinov, Alexandre D

    2005-02-01

    Polybrominated diphenyl ethers (PBDEs) are ubiquitous environmental contaminants due to their use as additive flame-retardants. Conventional catalytic hydrogenolysis in methanol solution and electrocatalytic hydrogenolysis in aqueous methanol were examined as methods for debrominating mono- and di-bromodiphenyl ethers, as well as a commercial penta-PBDE mixture, in each case using palladium on alumina as the catalyst. Electrocatalytic hydrogenolysis employed a divided flow-through batch cell, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes. Both methods gave efficient sequential debromination, with essentially complete removal of bromine from the PBDEs, but the electrocatalytic method was limited by the poor solubility of PBDEs in aqueous methanol. PMID:15639268

  4. Synthesis of Ethers via Reaction of Carbanions and Monoperoxyacetals

    PubMed Central

    2015-01-01

    Although transfer of electrophilic alkoxyl (“RO+”) from organic peroxides to organometallics offers a complement to traditional methods for etherification, application has been limited by constraints associated with peroxide reactivity and stability. We now demonstrate that readily prepared tetrahydropyranyl monoperoxyacetals react with sp3 and sp2 organolithium and organomagnesium reagents to furnish moderate to high yields of ethers. The method is successfully applied to the synthesis of alkyl, alkenyl, aryl, heteroaryl, and cyclopropyl ethers, mixed O,O-acetals, and S,S,O-orthoesters. In contrast to reactions of dialkyl and alkyl/silyl peroxides, the displacements of monoperoxyacetals provide no evidence for alkoxy radical intermediates. At the same time, the high yields observed for transfer of primary, secondary, or tertiary alkoxides, the latter involving attack on neopentyl oxygen, are inconsistent with an SN2 mechanism. Theoretical studies suggest a mechanism involving Lewis acid promoted insertion of organometallics into the O–O bond. PMID:26560686

  5. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether.

    PubMed

    Stenger-Smith, John D; Baldwin, Lawrence; Chafin, Andrew; Goodman, Paul A

    2016-08-01

    Despite the availability of a large number of alkyl tetrahydrofurfuryl ethers that have a wide range of applications, pure bis(tetrahydrofurfuryl) ether (BTHFE) has not been previously synthesized. Here, we report the synthesis of BTHFE (consisting of the RR, SS, and meso stereoisomers) at greater than 99 % purity from tetrahydrofurfuryl alcohol, using (tetrahydrofuran-2-yl)methyl methanesulfonate as an intermediate. Additionally, we demonstrate that BTHFE can be used as a non-volatile solvent in poly(3,4-propylenedioxythiophene)-based supercapacitors. Supercapacitor devices employing solutions of the ionic liquid 1-ethyl-3-methyl-imidizolium bis(trifluoromethylsulfonyl)imide in BTHFE display similar performances to those prepared by using the neat ionic liquid as an electrolyte, although solution-based devices exhibit a somewhat higher resistance. PMID:27547636

  6. CATALYSTS FOR HIGH CETANE ETHERS AS DIESEL FUELS

    SciTech Connect

    Kamil Klier; Richard G. Herman; James G.C. Shen; Qisheng Ma

    2000-08-31

    A novel 1,2-ethanediol, bis(hydrogen sulfate), disodium salt precursor-based solid acid catalyst with a zirconia substrate was synthesized and demonstrated to have significantly enhanced activity and high selectivity in producing methyl isobutyl ether (MIBE) or isobutene from methanol-isobutanol mixtures. The precursor salt was synthesized and provided by Dr. T. H. Kalantar of the M.E. Pruitt Research Center, Dow Chemical Co., Midland, MI 48674. Molecular modeling of the catalyst synthesis steps and of the alcohol coupling reaction is being carried out. A representation of the methyl transfer from the surface activated methanol molecule (left) to the activated oxygen of the isobutanol molecule (right) to form an ether linkage to yield MIBE is shown.

  7. Protoporphyrinogen oxidase as a molecular target for diphenyl ether herbicides.

    PubMed Central

    Matringe, M; Camadro, J M; Labbe, P; Scalla, R

    1989-01-01

    Diphenyl ether herbicides induce an accumulation of protoporphyrin IX in plant tissues. By analogy to human porphyria, the accumulation could be attributed to decreased (Mg or Fe)-chelatase or protoporphyrinogen oxidase activities. Possible effects of acifluorfen-methyl on these enzymes were investigated in isolated corn (maize, Zea mays) etioplasts, potato (Solanum tuberosum) and mouse mitochondria, and yeast mitochondrial membranes. Acifluorfen-methyl was strongly inhibitory to protoporphyrinogen oxidase activities whatever their origins [concn. causing 50% inhibition (IC50) = 4 nM for the corn etioplast enzyme]. By contrast, it was roughly 100,000 times less active on (Mg or Fe)-chelatase activities (IC50 = 80-100 microM). Our results lead us to propose protoporphyrinogen oxidase as a cellular target for diphenyl ether herbicides. PMID:2775186

  8. Synthesis and Characterization of bis(Tetrahydrofurfuryl) Ether

    PubMed Central

    Stenger‐Smith, John D.; Baldwin, Lawrence; Chafin, Andrew

    2016-01-01

    Abstract Despite the availability of a large number of alkyl tetrahydrofurfuryl ethers that have a wide range of applications, pure bis(tetrahydrofurfuryl) ether (BTHFE) has not been previously synthesized. Here, we report the synthesis of BTHFE (consisting of the RR, SS, and meso stereoisomers) at greater than 99 % purity from tetrahydrofurfuryl alcohol, using (tetrahydrofuran‐2‐yl)methyl methanesulfonate as an intermediate. Additionally, we demonstrate that BTHFE can be used as a non‐volatile solvent in poly(3,4‐propylenedioxythiophene)‐based supercapacitors. Supercapacitor devices employing solutions of the ionic liquid 1‐ethyl‐3‐methyl‐imidizolium bis(trifluoromethylsulfonyl)imide in BTHFE display similar performances to those prepared by using the neat ionic liquid as an electrolyte, although solution‐based devices exhibit a somewhat higher resistance. PMID:27547636

  9. Acute and subchronic toxicity of ethylene glycol monobutyl ether.

    PubMed Central

    Tyler, T R

    1984-01-01

    The available information on the acute and subchronic toxicity of ethylene glycol monobutyl ether is reviewed. Data from animal studies have been examined from the standpoint of dose-response relationships and the sensitivity of various animal species, including man, to the effects of this chemical. In view of recent findings with other chemically related glycol ethers, particular attention has been given to possible adverse effects on blood and testicular tissue. In evaluating the hazard that this chemical may pose to man, consideration has been given to likely routes of exposure and its irritant properties. It is concluded that the available information continues to support the current ACGIH TWA8-TLV of 25 ppm with a STEL of 75 ppm. PMID:6499803

  10. THERMODYNAMIC EVALUATION OF PREDICTED FLUORINATED ETHER, ETHANE, AND PROPANE AZEOTROPES

    EPA Science Inventory

    The paper gives results of thermodynamic analyses, using basic thermophysical property data, to evaluate seven predicted fluorinated ether, ethane, and propane azeotropes: E125/RC270, E125/R134a, E143a/R134, R134a/E143a, E143a/ R152a, R134/R245cb, and R245cb/R227ea. he performanc...

  11. A constitutive model of polyether-ether-ketone (PEEK).

    PubMed

    Chen, Fei; Ou, Hengan; Lu, Bin; Long, Hui

    2016-01-01

    A modified Johnson-Cook (JC) model was proposed to describe the flow behaviour of polyether-ether-ketone (PEEK) with the consideration of coupled effects of strain, strain rate and temperature. As compared to traditional JC model, the modified one has better ability to predict the flow behaviour at elevated temperature conditions. In particular, the yield stress was found to be inversely proportional to temperature from the predictions of the proposed model. PMID:26409233

  12. Thiophenyl ether disiloxanes and trisiloxanes useful as lubricant fluids

    NASA Technical Reports Server (NTRS)

    Bilow, N.; Akawie, R. I. (Inventor)

    1974-01-01

    The characteristics of organosilicon compounds for lubrication under extreme conditions are discussed. The substances considered are thiophenyl ether disiloxanes and trisiloxanes. These substances have low pour points and a high degree of radiation resistance. Substitution of sulfur for the phenoxy group oxygen of either siloxane compounds has been found to result in a marked improvement in lubricity. The chemical formulas of the organic compounds are presented.

  13. 2' and 3' Carboranyl uridines and their diethyl ether adducts

    DOEpatents

    Soloway, Albert H.; Barth, Rolf F.; Anisuzzaman, Abul K.; Alam, Fazlul; Tjarks, Werner

    1992-01-01

    There is disclosed a process for preparing carboranyl uridine nucleoside compounds and their diethyl ether adducts, which exhibit a tenfold increase in boron content over prior art boron containing nucleoside compounds. Said carboranyl uridine nucleoside compounds exhibit enhanced lipophilicity and hydrophilic properties adequate to enable solvation in aqueous media for subsequent incorporation of said compounds in methods for boron neutron capture therapy in mammalian tumor cells.

  14. Detonation characteristics of dimethyl ether and ethanol-air mixtures

    NASA Astrophysics Data System (ADS)

    Diakow, P.; Cross, M.; Ciccarelli, G.

    2015-05-01

    The detonation cell structure in dimethyl ether vapor and ethanol vapor-air mixtures was measured at atmospheric pressure and initial temperatures in the range of 293-373 K. Tests were carried out in a 6.2-m-long, 10-cm inner diameter tube. For more reactive mixtures, a series of orifice plates were used to promote deflagration-to-detonation transition in the first half of the tube. For less reactive mixtures prompt detonation initiation was achieved with an acetylene-oxygen driver. The soot foil technique was used to capture the detonation cell structure. The measured cell size was compared to the calculated one-dimensional detonation reaction zone length. For fuel-rich dimethyl ether mixtures the calculated reaction zone is highlighted by a temperature gradient profile with two maxima, i.e., double heat release. The detonation cell structure was interpreted as having two characteristic sizes over the full range of mixture compositions. For mixtures at the detonation propagation limits the large cellular structure approached a single-head spin, and the smaller cells approached the size of the tube diameter. There is little evidence to support the idea that the two cell sizes observed on the foils are related to the double heat release predicted for the rich mixtures. There was very little influence of initial temperature on the cell size over the temperature range investigated. A double heat release zone was not predicted for ethanol-air detonations. The detonation cell size for stoichiometric ethanol-air was found to be similar to the size of the small cells for dimethyl ether. The measured cell size for ethanol-air did not vary much with composition in the range of 30-40 mm. For mixtures near stoichiometric it was difficult to discern multiple cell sizes. However, near the detonation limits there was strong evidence of a larger cell structure similar to that observed in dimethyl ether air mixtures.

  15. Synthesis of active nitroguaiacol ether derivatives of streptomycin.

    PubMed Central

    Abad, J P; Amils, R

    1990-01-01

    The synthesis, purification, and biological properties of nitroguaiacol ether derivatives of streptomycin and their corresponding radioactive reduced products were examined. These derivatives are biologically active against gram-positive and gram-negative eubacteria and they are also photoreactive because of the presence of the nitroguaiacol group in the molecule. We demonstrated that these derivatives can be used as streptomycin analogs in photoaffinity labeling of the macromolecular structures related to the mode of action of the antibiotic. Images PMID:2127172

  16. Increasing the thermopower of crown-ether-bridged anthraquinones.

    PubMed

    Ismael, Ali K; Grace, Iain; Lambert, Colin J

    2015-11-01

    We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either () crown-ether or () diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The thermopowers of both and are negative and at room temperature are optimised by binding with TTF alone, achieving thermpowers of -600 μV K(-1) and -285 μV K(-1) respectively. At much lower temperatures, which are relevant to cascade coolers, we find that for , a combination of TTF and Na(+) yields a maximum thermopower of -710 μV K(-1) at 70 K, whereas a combination of TTF and Li(+) yields a maximum thermopower of -600 μV K(-1) at 90 K. For , we find that TTF doping yields a maximum thermopower of -800 μV K(-1) at 90 K, whereas at 50 K, the largest thermopower (of -600 μV K(-1)) is obtain by a combination TTF and K(+) doping. At room temperature, we obtain power factors of 73 μW m(-1) K(-2) for (in combination with TTF and Na(+)) and 90 μW m(-1) K(-2) for (with TTF). These are higher or comparable with reported power factors of other organic materials. PMID:26426840

  17. Secondary Li battery incorporating 12-Crown-4 ether

    NASA Technical Reports Server (NTRS)

    Nagasubramanian, Ganesan (Inventor); Distefano, Salvador (Inventor)

    1992-01-01

    A rechargeable lithium battery which utilizes a polyethylene oxide (PEO) solid polymeric electrolyte complexed with a lithium salt is disclosed. The conductivity is increased an order of magnitude and interfacial charge transfer resistance is substantially decreased by incorporating a minor amount of 12-Crown-4 ether in the PEO-lithium salt solid electrolyte film. Batteries containing the improved electrolyte permit operation at a lower temperature with improved efficiency.

  18. The interactions of water and perfluorodiethyl ether on Ru(100)

    SciTech Connect

    Leavitt, P.

    1990-09-21

    We have studied the interactions of water and perfluorodiethyl ether on Ru(100) in order to model the effects of surface structure and humidity on the bonding and decomposition of perfluoroalkyl ether lubricants with metal surfaces. In order to understand the interactions on Ru(100), we have first investigated the interactions of each of these adsorbates alone on the clean surface. The interactions of water with Ru(100) have been studied using both thermal desorption spectroscopy (TDS) and electron energy loss spectroscopy (EELS). From these studies we conclude that a small amount of water dissociates on this surface (5--10% of a monolayer), but water is adsorbed in a predominantly molecular form on this surface with an increasing degree of hydrogen-bonding with increasing coverage. The effects of hydrogen and oxygen coadsorption on the interactions of water with this surface have also been studied using TDS. Finally, the interactions of coadsorbed water and perfluorodiethyl ether on Ru(100) have been investigated using TDS.

  19. Dehydrogenative α-oxygenation of ethers with an iron catalyst.

    PubMed

    Gonzalez-de-Castro, Angela; Robertson, Craig M; Xiao, Jianliang

    2014-06-11

    Selective α-oxidation of ethers under aerobic conditions is a long-pursued transformation; however, a green and efficient catalytic version of this reaction remains challenging. Herein, we report a new family of iron catalysts capable of promoting chemoselective α-oxidation of a range of ethers with excellent mass balance and high turnover numbers under 1 atm of O2 with no need for any additives. Unlike metalloenzymes and related biomimetics, the catalyst produces H2 as the only byproduct. Mechanistic investigations provide evidence for an unexpected two-step reaction pathway, which involves dehydrogenative incorporation of O2 into the ether to give a peroxobisether intermediate followed by cleavage of the peroxy bond to form two ester molecules, releasing stoichiometric H2 gas in each step. The operational simplicity and environmental friendliness of this methodology affords a useful alternative for performing oxidation, while the unique ability of the catalyst in oxygenating a substrate via dehydrogenation points to a new direction for understanding metalloenzymes and designing new biomimetic catalysts. PMID:24835531

  20. Microbial degradation of 4-monobrominated diphenyl ether with anaerobic sludge.

    PubMed

    Shih, Yang-hsin; Chou, Hsi-Ling; Peng, Yu-Huei

    2012-04-30

    Polybrominated diphenyl ethers (PBDEs) are widely used flame retardant additives for many plastic and electronic products. Owing to their ubiquitous distribution in the environment, multiple toxicity to humans, and increasing accumulation in the environment, the fate of PBDEs is of serious concern for public safety. In this study, the degradation of 4-monobrominated diphenyl ether (BDE-3) in anaerobic sludge and the effect of carbon source addition were investigated. BDE-3 can be degraded by two different anaerobic sludge samples. The by-products, diphenyl ether (DE) and bromide ions, were monitored, indicating the reaction of debromination within these anaerobic samples. Co-metabolism with glucose facilitated BDE-3 biodegradation in terms of kinetics and efficiency in the Jhongsing sludge. Through the pattern of amplified 16S rRNA gene fragments in denatured gradient gel electrophoresis (DGGE), the composition of the microbial community was analyzed. Most of the predominant microbes were novel species. The fragments enriched in BDE-3-degrading anaerobic sludge samples are presumably Clostridium sp. This enrichment coincides with the H(2) gas generation and the facilitation of debromination during the degradation process. Findings of this study provide better understanding of the biodegradation of brominated DEs and can facilitate the prediction of the fate of PBDEs in the environment. PMID:22370205

  1. Mode of Action Studies on Nitrodiphenyl Ether Herbicides 1

    PubMed Central

    Bowyer, John R.; Hallahan, Beverly J.; Camilleri, Patrick; Howard, Joy

    1989-01-01

    The nitrodiphenyl ether herbicide 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitroacetophenone oxime-o-(acetic acid, methyl ester) (DPEI) induces light- and O2-dependent lipid peroxidation and chlorophyll (Chl) bleaching in the green alga Scenedesmus obliquus. Under conditions of O2-limitation, these effects are diminished by prometyne and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU), both inhibitors of photosynthetic electron transport. Mutants in which photosynthetic electron transport is blocked are also resistant to DPEI under conditions of O2-limitation. Light- and O2-dependent lipid peroxidation and Chl bleaching are also induced by 5-[2-chloro-4-(trifluoromethyl)phenoxy]-3-methoxyphthalide (DPEII), a diphenyl ether whose redox properties preclude reduction by photosystem I. However, these effects of DPEII are also inhibited by DCMU. Under conditions of high aeration, DCMU does not protect Scenedesmus cells from Chl bleaching induced by DPEI, but does protect against paraquat. DPEI, but not paraquat, induces tetrapyrrole formation in treated cells in the dark. This is also observed in a mutant lacking photosystem I but is suppressed under conditions likely to lead to O2 limitation. Our results indicate that, in contrast to paraquat, the role of photosynthetic electron transport in diphenyl ether toxicity in Scenedesmus is not to reduce the herbicide to a radical species which initiates lipid peroxidation. Its role is probably to maintain a sufficiently high O2 concentration, through water-splitting, in the algal suspension. PMID:16666600

  2. Developmental toxicity of diphenyl ether herbicides in birds

    USGS Publications Warehouse

    Hoffman, D.J.; Rattner, B.A.; Bunck, C.M.

    1991-01-01

    Diphenyl ether herblcldes, includlng nitrofen, have been identified as mammalian teratogens and cause perinatal mortality. American kestrel (Falco sparverius) nestlings were orally dosed for 10 days w1th 5 ul/g of corn oil (controls) or one of the diphenyl ether herbicides (nitrofen, bifenox, or oxyfluorofen). At 500 mg/kg, nitrofen resulted in complete mortality, bifenox in high (66%) mortality, and oxyfluorofen in no mortality. Nitrofen, at 250 mg/kg, reduced nestling growth, as reflected by decreased body weight and bone length. Bifenox at 250 mg/kg had less effect on growth than nitrofen but crown rump, humerus, radiusulna and femur lengths were significantly less than controls. Liver welght (percent of body welght) increased with 50 mg/kg nitrofen. Other manifestations of hepatotoxicity following nitrofen ingestion included increased hepatic GSH peroxidase activity with 0 mg/kg nitrofen, and increased plasma enzyme activities for ALT, AST. and LDHL with 250 mg/kg. Blfenox lngestion (50 mg/kg) resulted in increased hepatlc GSH peroxidase activity. Nitrofen exposure increased total plasma thyroxlne (T4) concentratlon. These findings suggest that altricial nestllng kestrels are more sensitive to diphenyl ether herbicides than precocial young or adult birds.

  3. Thermolysis of surface-immobilized phenethyl phenyl ether

    SciTech Connect

    Britt, P.F.; Buchanan, A.C. III; Hitsman, V.M.

    1991-01-01

    Our research has focused on modeling the constraints on free-radical reactions that might be imposed in coal as a consequence of its cross-linked macromolecular structure by covalently bonding diphenylalkanes to an inert silica surface. A surface-immobilized phenethyl phenyl ether ({approx}PhCH{sub 2}CH{sub 2}POh, or {approx}PPE-3) has been prepared as a model for ether linkages in lignin by the condensation of p-HOPhCH{sub 2}CH{sub 2}OPh with the surface hydroxyls of a high purity fumed silica. Thermolysis of {approx}PPE-3 at saturation surface coverage at 375{degree}C produces {approx}PhCH = CH{sub 2} and PhOH as the major products which are consistent with the proposed free-radical chain mechanism for the decomposition of fluid-phase phenethyl phenyl ether. However, significant quantities of {approx}PhCH{sub 3} and PhCHO (ca. 18% of the products) are produced indicating the emergence of a new reaction pathway on the surface. The mechanism for the decomposition of {approx}PPE-3 will be discussed in light of this new information. 18 refs., 1 fig.

  4. Synthesis of monophytanyl ether analogues of lysophosphatidic and lysophosphatidyl glycerol.

    PubMed

    Kates, M; Hancock, A J

    1976-10-01

    The chemical synthesis of 3-O-phytanyl-sn-glycero-1-phosphoric acid (monophytanyl ether analogue of lysophosphatidic acid) was effected by condensation of 1-iodo-2-O-benzyl-3-O-phytanyl-sn-glycerol with silver di-p-nitrobenzyl phosphate in anhydrous toluene followed by catalytic hydrogenolysis of the resulting phosphotriester to remove the benzyl and p-nitrobenzyl groups. Synthesis of 3-O-phytanyl-sn-glycero-1-phosphoryl-1'-sn-glycerol (monophytanyl ether analogue of lysophosphatidyl glycerol) was carried out by conversion of the above phosphotriester to the monosilver salt of the suitably blocked lysophosphatidic acid which was condensed with 1-iodo-2-O-t-butyl-3-O-benzyl-sn-glycerol. Removal of the protecting aromatic and t-butyl groups from the resulting blocked triester intermediate gave the desired phytanyl ether analogue of lysophosphatidyl glycerol. Both lyso analogues were isolated as analytically and chromatographically pure potassium salts. Their physical properties and behavior towards acid hydrolysis are described. PMID:991376

  5. Quantification of derivatives of bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) migrated from can coatings into tuna by HPLC/fluorescence and MS detection.

    PubMed

    Berger, U; Oehme, M; Girardin, L

    2001-01-01

    A reversed phase high performance liquid chromatographic method combined with fluorescence and mass spectrometric detection in series is presented for the separation and quantification of bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) derivatives in extracts from food can coatings, tuna and oil. Fifteen samples of tuna cans bought in four European countries were investigated. Atmospheric pressure chemical ionization mass spectrometry in the positive ion mode (APCI(+)-MS) allowed to tentatively identify BADGE and NOGE related compounds originating from reactions of the glycidyl ethers with bisphenols, phenol, butanol, water and hydrochloric acid. Quantification was based on the external standard method and fluorescence detection. Mass fractions up to 3.7 micrograms/g were found for hydrochlorination products of bisphenol F diglycidyl ether (BFDGE + 2HCl) in tuna. Furthermore, total migration quantities of phenolic ether compounds were estimated. The highest values found were 20 micrograms/g in tuna and 43 micrograms/g in the oil phase. PMID:11225353

  6. Pressure and temperature dependence of excess enthalpies of methanol + tetraethylene glycol dimethyl ether and methanol + polyethylene glycol dimethyl ether 250

    SciTech Connect

    Lopez, E.R.; Coxam, J.Y.; Fernandez, J.; Grolier, J.P.E.

    1999-12-01

    The excess molar enthalpies at 323.15 K, 373.15 K, and 423.15 K, at 8 MPa, are reported for the binary mixtures methanol + tetraethylene glycol dimethyl ether (TEGDME) and methanol + poly(ethylene glycol) dimethyl ether 250 (PEGDME 250). Excess molar enthalpies were determined with a Setaram C-80 calorimeter equipped with a flow mixing cell. For both systems, the excess enthalpies are positive over the whole composition range, increasing with temperature. The H{sup E}(x) curves are slightly asymmetrical, and their maxima are skewed toward the methanol-rich region. The excess enthalpies slightly change with the pressure, the sign of this change being composition-dependent. In the case of mixtures with TEGDME, the experimental H{sup E} values have been compared with those predicted with the Gmehling et al. version of UNIFAC (Dortmund) and the Nitta-Chao and DISQUAC group contribution models.

  7. Intermolecular ionic cross-linked sulfonated poly(ether ether ketone) membranes containing diazafluorene for direct methanol fuel cell applications

    NASA Astrophysics Data System (ADS)

    Liang, Yu; Gong, Chenliang; Qi, Zhigang; Li, Hui; Wu, Zhongying; Zhang, Yakui; Zhang, Shujiang; Li, Yanfeng

    2015-06-01

    A series of novel ionic cross-linking sulfonated poly(ether ether ketone) (SPEEK) membranes containing the diazafluorene functional group are synthesized to reduce the swelling ratio and methanol permeability for direct methanol fuel cell (DMFC) applications. The ionic cross-linking is realized by the interaction between sulfonic acid groups and pyridyl in diazafluorene. The prepared membranes exhibit good mechanical properties, adequate thermal stability, good oxidative stability, appropriate water uptake and low swelling ratio. Moreover, the ionic cross-linked membranes exhibit lower methanol permeability in the range between 0.56 × 10-7 cm2 s-1 and 1.8 × 10-7 cm2 s-1, which is lower than Nafion 117, and they exhibit higher selectivity than Nafion 117 at 30 °C on the basis of applicable proton conductivity.

  8. Crystallization of poly(aryl-ether-ether-ketone) - Effect of thermal history of the melt on crystallization kinetics

    SciTech Connect

    Deslandes, Y.; Day, M.; Suprunchuk, T.; Sabir, N.F. )

    1989-10-01

    Differential Scanning Calorimetry (DSC) and optical microscopy were used to investigate the effect of the thermal history of the melt on the crystallization of a commercial sample of poly(aryl-ether-ether-ketone) (PEEK). Heating a film of PEEK at a temperature above the melt temperature for various periods of time changes the nucleation and crystal growth rate upon cooling the sample. Destruction of existing nuclei, formation of new nuclei, chain branching, cross linking, and chemical degradation of the macromolecular chains are all believed to take place at different times and to different extents during the thermal melt processing of the polymer. This study suggests that the thermal history of the melt plays an important role in the crystallization of PEEK samples. 45 refs.

  9. Biosorption and degradation of decabromodiphenyl ether by Brevibacillus brevis and the influence of decabromodiphenyl ether on cellular metabolic responses.

    PubMed

    Wang, Linlin; Tang, Litao; Wang, Ran; Wang, Xiaoya; Ye, Jinshao; Long, Yan

    2016-03-01

    There is global concern about the effects of decabromodiphenyl ether (BDE209) on environmental and public health. The molecular properties, biosorption, degradation, accumulation, and cellular metabolic effects of BDE209 were investigated in this study to identify the mechanisms involved in the aerobic biodegradation of BDE209. BDE209 is initially absorbed by wall teichoic acid and N-acetylglucosamine side chains in peptidoglycan, and then, BDE209 is transported and debrominated through three pathways, giving tri-, hepta-, octa-, and nona-bromodiphenyl ethers. The C-C bond energies decrease as the number of bromine atoms on the diphenyl decreases. Polybrominated diphenyl ethers (PBDEs) inhibit protein expression or accelerate protein degradation and increase membrane permeability and the release of Cl(-), Na(+), NH4 (+), arabinose, proteins, acetic acid, and oxalic acid. However, PBDEs increase the amounts of K(+), Mg(2+), PO4 (3-), SO4 (2-), and NO3 (-) assimilated. The biosorption, degradation, accumulation, and removal efficiencies when Brevibacillus brevis (1 g L(-1)) was exposed to BDE209 (0.5 mg L(-1)) for 7 days were 7.4, 69.5, 16.3, and 94.6 %, respectively. PMID:26555880

  10. Size-exclusion chromatography of ultrahigh molecular weight methylcellulose ethers and hydroxypropyl methylcellulose ethers for reliable molecular weight distribution characterization.

    PubMed

    Li, Yongfu; Shen, Hongwei; Lyons, John W; Sammler, Robert L; Brackhagen, Meinolf; Meunier, David M

    2016-03-15

    Size-exclusion chromatography (SEC) coupled with multi-angle laser light scattering (MALLS) and differential refractive index (DRI) detectors was employed for determination of the molecular weight distributions (MWD) of methylcellulose ethers (MC) and hydroxypropyl methylcellulose ethers (HPMC) having weight-average molecular weights (Mw) ranging from 20 to more than 1,000kg/mol. In comparison to previous work involving right-angle light scattering (RALS) and a viscometer for MWD characterization of MC and HPMC, MALLS yields more reliable molecular weight for materials having weight-average molecular weights (Mw) exceeding about 300kg/mol. A non-ideal SEC separation was observed for cellulose ethers with Mw>800kg/mol, and was manifested by upward divergence of logM vs. elution volume (EV) at larger elution volume at typical SEC flow rate such as 1.0mL/min. As such, the number-average molecular weight (Mn) determined for the sample was erroneously large and polydispersity (Mw/Mn) was erroneously small. This non-ideality resulting in the late elution of high molecular weight chains could be due to the elongation of polymer chains when experimental conditions yield Deborah numbers (De) exceeding 0.5. Non-idealities were eliminated when sufficiently low flow rates were used. Thus, using carefully selected experimental conditions, SEC coupled with MALLS and DRI can provide reliable MWD characterization of MC and HPMC covering the entire ranges of compositions and molecular weights of commercial interest. PMID:26794765

  11. Safety Assessment of Alkyl PEG/PPG Ethers as Used in Cosmetics.

    PubMed

    Fiume, Monice M; Heldreth, Bart; Bergfeld, Wilma F; Belsito, Donald V; Hill, Ronald A; Klaassen, Curtis D; Liebler, Daniel C; Marks, James G; Shank, Ronald C; Slaga, Thomas J; Snyder, Paul W; Andersen, F Alan

    2016-07-01

    The Cosmetic Ingredient Review (CIR) Expert Panel assessed the safety of 131 alkyl polyethylene glycol (PEG)/polypropylene glycol ethers as used in cosmetics, concluding that these ingredients are safe in the present practices of use and concentration described in this safety assessment when formulated to be nonirritating. Most of the alkyl PEG/PPG ethers included in this review are reported to function in cosmetics as surfactants, skin-conditioning agents, and/or emulsifying agents. The alkyl PEG/PPG ethers share very similar physiochemical properties as the alkyl PEG ethers, which were reviewed previously by the CIR Expert Panel and found safe when formulated to be nonirritating. The alkyl PEG ethers differ by the inclusion of PPG repeat units, which are used to fine-tune the surfactant properties of this group. The Panel relied heavily on data on analogous ingredients, extracted from the alkyl PEG ethers and PPG reports, when making its determination of safety. PMID:27383199

  12. Effect of temperature and pressure on the volumetric properties of branched and cyclic ethers

    SciTech Connect

    Govender, U.P.; Letcher, T.M.; Garg, S.K.; Ahluwalia, J.C.

    1996-01-01

    The densities of liquid diisopropyl ether, 1,1-dimethylethyl methyl ether, 1,1-dimethylpropyl methyl ether, tetrahydrofuran, tetrahydropyran, and 1,4-dioxane have been determined from 288.15 to 328.15 K at pressures ranging from 0.1 to 8 MPa. The molar volumes (derived from densities) have been fitted to a polynomial as a function of temperature and pressure. Where available, the results have been compared to literature values.

  13. Visible-Light-Promoted Oxidative [4 + 2] Cycloadditions of Aryl Silyl Enol Ethers.

    PubMed

    Yang, Bo; Lu, Zhan

    2016-08-19

    Visible-light-promoted oxidative [4 + 2] cycloadditions of ε,3-unsaturated silyl enol ethers have been developed to efficiently and diastereoselectively construct polycyclic skeletons under mild conditions. The diastereoselectivities were dependent on the stereoconfiguration of silyl enol ether, substitutions on the link, as well as electric properties of substitutions on aryl rings. The intermediates could be trapped by TEMPO, oxygen or methanol. Mechanistic studies indicated the reaction was initiated by one-electron oxidation of the silyl enol ether. PMID:27391768

  14. Thermodynamics of Hydrogen Production from Dimethyl Ether Steam Reforming and Hydrolysis

    SciTech Connect

    T.A. Semelsberger

    2004-10-01

    The thermodynamic analyses of producing a hydrogen-rich fuel-cell feed from the process of dimethyl ether (DME) steam reforming were investigated as a function of steam-to-carbon ratio (0-4), temperature (100 C-600 C), pressure (1-5 atm), and product species: acetylene, ethanol, methanol, ethylene, methyl-ethyl ether, formaldehyde, formic acid, acetone, n-propanol, ethane and isopropyl alcohol. Results of the thermodynamic processing of dimethyl ether with steam indicate the complete conversion of dimethyl ether to hydrogen, carbon monoxide and carbon dioxide for temperatures greater than 200 C and steam-to-carbon ratios greater than 1.25 at atmospheric pressure (P = 1 atm). Increasing the operating pressure was observed to shift the equilibrium toward the reactants; increasing the pressure from 1 atm to 5 atm decreased the conversion of dimethyl ether from 99.5% to 76.2%. The order of thermodynamically stable products in decreasing mole fraction was methane, ethane, isopropyl alcohol, acetone, n-propanol, ethylene, ethanol, methyl-ethyl ether and methanol--formaldehyde, formic acid, and acetylene were not observed. The optimal processing conditions for dimethyl ether steam reforming occurred at a steam-to-carbon ratio of 1.5, a pressure of 1 atm, and a temperature of 200 C. Modeling the thermodynamics of dimethyl ether hydrolysis (with methanol as the only product considered), the equilibrium conversion of dimethyl ether is limited. The equilibrium conversion was observed to increase with temperature and steam-to-carbon ratio, resulting in a maximum dimethyl ether conversion of approximately 68% at a steam-to-carbon ratio of 4.5 and a processing temperature of 600 C. Thermodynamically, dimethyl ether processed with steam can produce hydrogen-rich fuel-cell feeds--with hydrogen concentrations exceeding 70%. This substantiates dimethyl ether as a viable source of hydrogen for PEM fuel cells.

  15. Correspondence by Charles T. Jackson containing the earliest known illustrations of a Morton ether inhaler.

    PubMed

    Haridas, Rajesh P; Bause, George S

    2013-11-01

    A letter, dated December 1, 1846, from Charles T. Jackson, MD, to Josiah D. Whitney contains a previously unreported description of a Morton ether inhaler and the only known contemporaneous hand-drawn illustrations of this type of ether inhaler. This letter and 2 other known letters on ether anesthesia were probably carried from Boston, MA, to Liverpool, United Kingdom, on the same paddle steamer (Acadia) that carried the well-known letter from Jacob Bigelow, MD, to Francis Boott, MD. PMID:24029852

  16. Evaluation of alternariol and alternariol methyl ether for mutagenic activity in Salmonella typhimurium

    SciTech Connect

    Davis, V.M.; Stack, M.E. )

    1994-10-01

    Alternariol and alternariol methyl ether were tested in the Ames Salmonella typhimurium assay, and both were shown, with and without metabolic activation, to be nonmutagenic to strains TA98 and TA100. The finding of other investigators that alternariol methyl ether is weakly mutagenic to Ta98 without metabolic activation could have resulted from the presence of a small amount of one of the highly mutagenic altertoxins in the alternariol methyl ether originally tested. 9 refs., 3 figs., 1 tab.

  17. Methyl aryl ethers from coal liquids as gasoline extenders and octane improvers

    SciTech Connect

    Singerman, G.M.

    1980-11-01

    A mixture of methyl aryl ethers derived from the phenols present in direct liquefaction coal liquids shows considerable promise as a gasoline blending agent and octane improver. The mixture of methyl aryl ethers was blended at five volume percent with a commercial, unleaded gasoline. The properties and performance of the blend in a variety of laboratory and automotive tests is reported. The tests show that the mixture of methyl aryl ethers improves gasoline octane without degrading other gasoline properties.

  18. Design, synthesis, and biological activity of oxime ether strobilurin derivatives containing indole moiety as novel fungicide.

    PubMed

    Xie, Ya-Qiang; Huang, Zi-Long; Yan, Hui-Dong; Li, Jun; Ye, Li-Yi; Che, Li-Ming; Tu, Song

    2015-06-01

    Twenty-one novel oxime ether strobilurins containing indole moiety, which employed an indole group to stabilize the E-styryl group in Enoxastrobin, were designed and synthesized. The biological assay indicated that most compounds exhibited potent fungicidal activities. The structure-activity relationship study demonstrated that the synthesized methyl 3-methoxypropenoate oxime ethers 7b-e exhibited remarkably high activities among all the synthesized oxime ether compounds 7. Moreover, the fungicidal activities of methyl α-(methoxyimino)benzeneacetate oxime ethers compounds 7f-i and N-methoxy-carbamic acid methyl esters compounds 7j-m showed significant differences compared to the corresponding products of ammonolysis. PMID:25346294

  19. [Did Seikyo Sugita Perform Two Surgical Operations under Ether Anesthesia in 1855?].

    PubMed

    Matsuki, Akitomo

    2015-07-01

    Although Seikyou Sugita is said to have provided ether anesthesia for two surgical oprations in 1855 including the scur resection of burned fingers of a man and the resection of a breast cancer of a woman. The details of his administration of the drug were not known because he did not describe these cases at all. According to Treatise on Inhalation of Ether written in 1863 by Shinryo Tsuboi, Sugita failed to provide successful general anesthesia using ether for these patients. The ether he used was prepared by Ryuho Shima, and the failures were likely to be due to impure nature of the agent. PMID:26422949

  20. Polybrominated diphenyl ethers (PBDEs): new pollutants-old diseases.

    PubMed

    Siddiqi, Muhammad Akmal; Laessig, Ronald H; Reed, Kurt D

    2003-10-01

    Polybrominated diphenyl ethers (PBDEs) are a class of recalcitrant and bioaccumulative halogenated compounds that have emerged as a major environmental pollutant. PBDEs are used as a flame-retardant and are found in consumer goods such as electrical equipment, construction materials, coatings, textiles and polyurethane foam (furniture padding). Similar in structure to polychlorinated biphenyls (PCBs), PBDEs resist degradation in the environment. Less brominated PBDEs like tetra-, penta- and hexa- demonstrate high affinity for lipids and can accumulate in the bodies of animals and humans. Breast milk from North American women contained much higher amounts of PBDEs than levels in breast milk from Swedish women, indicating that North American exposures to PBDEs may be particularly high. Evidence to date suggests that tetra- and penta-BDEs are likely to be the more toxic and bioaccumulative of the PBDE compounds, compared to octa- and deca-congeners. PBDEs are sold as mixtures, under names such as "pentabromodiphenyl ether" and "octabromodiphenyl ether." The pentabromo product is a mixture of tetra-BDEs and penta-BDEs in approximately equal amounts. Pentabromo consists of PBDEs that are believed to be the most toxic. This mixture has been banned by the European Union, but is still used in North America. The United States is the leading producer and user of pentabromo. In August 2003, the State of California passed a bill to phase out the use of penta- and octa-PBDE by 2008. The toxicology of PBDEs is not well understood, but PBDEs have been associated with tumors, neurodevelopmental toxicity and thyroid hormone imbalance. The neurotoxic effects of PBDEs are similar to those observed for PCBs. Children exposed to PBDEs are prone to subtle but measurable developmental problems. It is presumed that PBDEs are endocrine disruptors, but research in this area is scant. Further studies are imperative in a multitude of health and environmental disciplines to determine the

  1. The Microwave Spectrum of Partially Deuterated Species of Dimethyl Ether

    NASA Astrophysics Data System (ADS)

    Lauvergnat, D.; Margulès, L.; Motiyenko, R. A.; Guillemin, J.-C.; Coudert, L. H.

    2011-06-01

    Dimethyl ether is a molecule of astrophysical interest spectroscopically well characterized. It is one of the simplest molecules with two methyl groups undergoing large amplitude internal rotations. Due to deuterium enrichment in the interstellar medium, one can reasonably expect that partially deuterated species of dimethyl ether might be detected. However, there are no spectroscopic results about the microwave spectrum of such species. A theoretical calculation of the rotation-torsion energy levels of the partially deuterated species of dimethyl ether has been undertaken aided by ab initio calculations. The approach accounts for the complicated torsion-rotation interactions displayed by this molecule and for the fact that deuteration leads to changes of the bidimensional internal rotation effective potential energy surface. Due to zero-point energy contributions from the 19 small amplitude vibrational modes, this surface no longer displays G36 symmetry. Rotation-torsion energy levels are computed treating the two angles of internal rotation as active coordinates and evaluating Hamiltonian matrix elements with the help of Gaussian quadrature. It is hoped that the present results will allow us to understand the microwave spectrum of the mono deuterated species CH_2DOCH_3 which has been recorded in Lille with the new sub millimeter wave spectrometer (150--950 GHz) based on harmonic generation of solid-state sources. [2] Snyder, Buhl, and Schwartz, Astrophys. J. Letters 191 (1974) L79. [3] Endres, Drouin, Pearson, Müller, Lewen, Schlemmer, and Giesen, A&A 504 (2009) 635. [4] Solomon and Woolf, Astrophys. J. Letters 180 (1973) L89. [5] Lauvergnat and Nauts, J. Chem. Phys. 116 (2002) 8560; and Light and Bačić, J. Chem. Phys. 87 (1987) 4008.

  2. On the radiation stability of crown ethers in ionic liquids.

    SciTech Connect

    Shkrob, I.; Marin, T.; Dietz, M.

    2011-04-14

    Crown ethers (CEs) are macrocyclic ionophores used for the separation of strontium-90 from acidic nuclear waste streams. Room temperature ionic liquids (ILs) are presently being considered as replacements for traditional molecular solvents employed in such separations. It is desirable that the extraction efficacy obtained with such solvents should not deteriorate in the strong radiation fields generated by decaying radionuclides. This deterioration will depend on the extent of radiation damage to both the IL solvent and the CE solute. While radiation damage to ILs has been extensively studied, the issue of the radiation stability of crown ethers, particularly in an IL matrix, has not been adequately addressed. With this in mind, we have employed electron paramagnetic resonance (EPR) spectroscopy to study the formation of CE-related radicals in the radiolysis of selected CEs in ILs incorporating aromatic (imidazolium and pyridinium) cations. The crown ethers have been found to yield primarily hydrogen loss radicals, H atoms, and the formyl radical. In the low-dose regime, the relative yield of these radicals increases linearly with the mole fraction of the solute, suggesting negligible transfer of the excitation energy from the solvent to the solute; that is, the solvent has a 'radioprotective' effect. The damage to the CE in the loading region of practical interest is relatively low. Under such conditions, the main chemical pathway leading to decreased extraction performance is protonation of the macrocycle. At high radiation doses, sufficient to increase the acidity of the IL solvent significantly, such proton complexes compete with the solvent cations as electron traps. In this regime, the CEs will rapidly degrade as the result of H abstraction from the CE ring by the released H atoms. Thus, the radiation dose to which a CE/IL system is exposed must be maintained at a level sufficiently low to avoid this regime.

  3. CATALYSTS FOR HIGH CETANE ETHERS AS DIESEL FUELS

    SciTech Connect

    Kamil Klier; Richard G. Herman; Heock-Hoi Kwon; James G. C. Shen; Qisheng Ma; Robert A. Hunsicker; Andrew P. Butler; Scott J. Bollinger

    2003-03-01

    A tungstena-zirconia (WZ) catalyst has been investigated for coupling methanol and isobutanol to unsymmetrical ethers, i.e. methyl isobutyl ether (MIBE) and compared with earlier studied sulfated-zirconia (SZ) and Nafion-H catalysts. In all cases, the ether synthesis mechanism is a dual site S{sub N}2 process involving competitive adsorption of reactants on proximal acid sites. At low reaction temperatures, methylisobutylether (MIBE) is the predominant product. However, at temperatures >135 C the WZ catalyst is very good for dehydration of isobutanol to isobutene. The surface acid sites of the WZ catalyst and a Nafion-H catalyst were diagnosed by high resolution X-ray photoelectron spectroscopy (XPS) of N 1s shifts after adsorption of amines. Using pyridine, ethylenediamine, and triethylamine, it is shown that WZ has heterogeneous strong Broensted acid sites. Theoretical study located the transition state of the alcohol coupling reaction on proximal Broensted acid sites and accounted well for XPS core-level shifts upon surface acid-base interactions. While computations have not been carried out with WZ, it is shown that the SZ catalyst is a slightly stronger acid than CF{sub 3}SO{sub 3}H (a model for Nafion-H) by 1.3-1.4 kcal/mol. A novel sulfated zirconia catalyst having proximal strong Broensted acid sites was synthesized and shown to have significantly enhanced activity and high selectivity in producing MIBE or isobutene from methanol/isobutanol mixtures. The catalyst was prepared by anchoring 1,2-ethanediol bis(hydrogen sulfate) salt precursor onto zirconium hydroxide, followed by calcination to remove the -(CH{sub 2}CH{sub 2})- bridging residues.

  4. An aging study of wire chambers with dimethyl ether

    SciTech Connect

    Jibaly, M.; Chrusch, P. Jr.; Hilgenberg, G.; Majewski, S.; Wojcik, R.; Sauli, F.; Gaudaen, J.

    1989-02-01

    The authors report results on the aging of different types of resistive and non-resistive wires in wire chambers filled with dimethyl ether (DME) of varying degrees of purity. Among the Freon impurities detected in our DME batches, only Freon-11 was found to contribute to the aging process. Of the resistive wires, Nicotin and Stablohm produced fast aging, whereas stainless steel withstood extended irradiation in purified DME (up to 1 C/cm) without any apparent damage. Gold-plated tungsten and molybdenum wires produced results comparable to those of the stainless steel.

  5. Catalytic Dealkylation of Ethers to Alcohols on Metal Surfaces.

    PubMed

    Yang, Biao; Lin, Haiping; Miao, Kangjian; Zhu, Pan; Liang, Liangbo; Sun, Kewei; Zhang, Haiming; Fan, Jian; Meunier, Vincent; Li, Youyong; Li, Qing; Chi, Lifeng

    2016-08-16

    On-surface synthesis has prompted much interest in recent years because it provides an alternative strategy for controlling chemical reactions and allows for the direct observation of reaction pathways. Herein, we combined scanning tunneling microscopy and density functional theory to provide extensive evidence for the conversion of alkoxybenzene-containing ethers into alcohols by means of surface synthesis. The reported dealkylation reactions are finely controlled by the annealing parameters, which govern the onset of successive alkyl chains dissociations. Moreover, density functional theory calculations elucidate the details of the reaction pathways, showing that dealkylation reactions are surface-assisted and very different from their homogeneous analogues in solution. PMID:27432690

  6. Vibrational and VCD spectra of poly(menthyl vinyl ether)

    NASA Astrophysics Data System (ADS)

    McCann, J. L.; Bour, P.; Wieser, H.

    1998-06-01

    The detailed assignments are reported for the vibrational and VCD spectra of (1S,2R,5S)-(+)-menthol. Energy minimized geometries, harmonic force fields, and atomic polar tensors were calculated at the Becke3LYP/6-31G** level, and atomic axial tensors with the vibronic coupling theory at the HF/6-31G level. The spectra consist of contributions mainly from two isomers (70%) distinguished only by conformation of the OH group. An attempt was made to simulate the absorption and VCD spectra of poly(methyl vinyl ether) using a component approach and invoking the excitation scheme with promising though not conclusive results at this stage.

  7. Crown ether derivative assisted growth of oriented polyaniline nanotubes

    NASA Astrophysics Data System (ADS)

    Xia, Haibing; Cheng, Daming; Lam, Peisuan; Chan, Hardy Sze On

    2006-08-01

    We report a chemical route to synthesize oriented arrays of conducting polyaniline (PANI) nanotubes (60-150 nm in diameter and a few micrometres in length) by hydrogen-bonding directionality in the presence of a crown ether derivative (CE-SO3K) and ammonium persulfate (APS) in HCl solution. The morphology of the oriented PANI nanotubes was confirmed by SEM and TEM images. The effects of reaction conditions on the morphology of the resultant PANI nanostructures were studied. The chemical and electronic structures of the PANI nanotubes were also studied by FTIR and UV-vis spectrometry, respectively.

  8. Composites of vinyl polystyrylpyridine/bismaleimide-aliphatic ether copolymers

    NASA Technical Reports Server (NTRS)

    Heimbuch, Alvin H.; Rosser, Robert W.; Hsu, Ming-Ta S.

    1989-01-01

    An aliphatic ether bismaleimide was prepared and coreacted with a polyvinylstyrylpyridine (VPSP) oligomer. Studies showed that a controlled ratio of aliphatic to aromatic units in the polymer backbone improved both processibility and interlaminar shear properties for the carbon-fiber composite system. This modified resin was readily soluble in tetrahydrofuran, allowing for better fiber impregnation and thus enhancing adhesive properties and reproducibility. DSC studies have shown a lower cure temperature for the copolymer than for the neat aliphatic bismaleimide, and a glass transition temperature of 260 C, which is more than adequate for most applications. Limited measurements indicated an improvement in toughness (impact resistance).

  9. Dichloromethyl alkyl ethers and sulfides in the Reformatskii reaction

    SciTech Connect

    Lapkin, I.I.; Fotin, V.V.

    1986-09-10

    A study was carried out on the reaction of dichloromethyl alkyl ethers and sulfides with ..cap alpha..-brominated esters in the presence of zinc resulting in the formation of either ..cap alpha..-alkyl-..beta..-alkoxyacrylates (or ..cap alpha..-alkyl-..beta..-alkylthioacrylates) or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkoxyglutaric acid (or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkylthioglutaric acid) depending on the structure of the starting bromoester. PMR and IR spectroscopy indicates the geometry of the ..cap alpha..-alkyl-..beta..-alkoxyacrylates and ..cap alpha..-alkyl-..beta..-alkylthioacrylates.

  10. Chemistry and properties of new poly(arylene ether imidazoles)

    NASA Technical Reports Server (NTRS)

    Connell, J. W.; Hergenrother, P. M.

    1990-01-01

    As part of a program to develop high-temperature high-performance structural resins for aerospace applications, the chemistry and properties of new poly(arylene ether imidazoles) were investigated. The polymers were prepared by the nucleophilic displacement reaction of aromatic bis(imidazolephenols) with activated aromatic difluoro compounds. The amorphous thermoplastic polymers exhibited glass transition temperatures from 230 to 301 C, inherent viscosities from 0.46 to 1.46 dL/g, and number-average molecular weights as high as 59,300 g/mole. The polymers exhibit good toughness, adhesive, composite, and film properties. The chemical, physical, and mechanical properties of these materials are discussed.

  11. Experimental and Theoretical Studies on Corvol Ether Biosynthesis.

    PubMed

    Rabe, Patrick; Janusko, Aron; Goldfuss, Bernd; Dickschat, Jeroen S

    2016-01-01

    The biosynthesis of corvol ethers A and B, two sesquiterpenes from Kitasatospora setae, proceeds with involvement of either one 1,3- or two sequential 1,2-hydride shifts. Quantum chemical calculations revealed that the sequence of two 1,2-hydride shifts is energetically favoured. Labelling experiments were in agreement with this finding. In addition, the stereochemical course of a reprotonation step was investigated by incubation of (13)C-labelled isotopomers of farnesyl diphosphate in water and in deuterium oxide. PMID:26635093

  12. Ultraviolet absorption spectra of bromochloramine and dibromochloramine in ether

    SciTech Connect

    Haag, W.R.; Jolley, R.L.

    1981-01-01

    In the development of a kinetic model for predicting concentrations of chlorine-produced oxidants in seawater, Haag and Lietzke postulated the formation of bromochloramines in addition to chloramines and bromamines although the existence of inorganic bromochloramines had not been established. Isolation of the inorganic derivatives in aqueous solution in order to characterize their physical properties so that they may be detected in the mixtures of halamines encountered during saline water chlorination has not, thus, far, been accomplished. The chemistry of the mono-chloramine-hypobromite system in ethereal solution is described with the hope that it will give some insight into the chemistry of the same system in aqueous solution.

  13. Ether Lipids of Planktonic Archaea in the Marine Water Column

    PubMed Central

    Hoefs, M.; Schouten, S.; De Leeuw, J. W.; King, L. L.; Wakeham, S. G.; Damste, J.

    1997-01-01

    Acyclic and cyclic biphytanes derived from the membrane ether lipids of archaea were found in water column particulate and sedimentary organic matter from several oxic and anoxic marine environments. Compound-specific isotope analyses of the carbon skeletons suggest that planktonic archaea utilize an isotopically heavy carbon source such as algal carbohydrates and proteins or dissolved bicarbonate. Due to their high preservation potential, these lipids provide a fossil record of planktonic archaea and suggest that they have thrived in marine environments for more than 50 million years. PMID:16535669

  14. Polybrominated Diphenyl Ethers: Structure Determination and Trends in Antibacterial Activity.

    PubMed

    Liu, Hongbing; Lohith, Katheryn; Rosario, Margaret; Pulliam, Thomas H; O'Connor, Robert D; Bell, Lori J; Bewley, Carole A

    2016-07-22

    Antibacterial-guided fractionation of the Dictyoceratid sponges Lamellodysidea sp. and two samples of Dysidea granulosa yielded 14 polybrominated, diphenyl ethers including one new methoxy-containing compound (8). Their structures were elucidated by interpretation of spectroscopic data of the natural product and their methoxy derivatives. Most of the compounds showed strong antimicrobial activity with low- to sub-microgram mL(-1) minimum inhibitory concentrations against drug-susceptible and drug-resistant strains of Staphylococcus aureus and Enterococcus faecium, and two compounds inhibited Escherichia coli in a structure-dependent manner. PMID:27399938

  15. Dimethyl ether production from methanol and/or syngas

    SciTech Connect

    Dagle, Robert A; Wang, Yong; Baker, Eddie G; Hu, Jianli

    2015-02-17

    Disclosed are methods for producing dimethyl ether (DME) from methanol and for producing DME directly from syngas, such as syngas from biomass. Also disclosed are apparatus for DME production. The disclosed processes generally function at higher temperatures with lower contact times and at lower pressures than conventional processes so as to produce higher DME yields than do conventional processes. Certain embodiments of the processes are carried out in reactors providing greater surface to volume ratios than the presently used DME reactors. Certain embodiments of the processes are carried out in systems comprising multiple microchannel reactors.

  16. Ether-based nonflammable electrolyte for room temperature sodium battery

    NASA Astrophysics Data System (ADS)

    Feng, Jinkui; Zhang, Zhen; Li, Lifei; Yang, Jian; Xiong, Shenglin; Qian, Yitai

    2015-06-01

    Safety problem is one of the key points that hinder the development of room temperature sodium batteries. In this paper, four well-known nonflammable organic compounds, Trimethyl Phosphate (TMP), Tri(2,2,2-trifluoroethyl) phosphite (TFEP), Dimethyl Methylphosphonate (DMMP), Methyl nonafluorobuyl Ether (MFE), are investigated as nonflammable solvents in sodium batteries for the first time. Among them, MFE is stable towards sodium metal at room temperature. The electrochemical properties and electrode compatibility of MFE based electrolyte are investigated. Both Prussian blue cathode and carbon nanotube anode show good electrochemical performance retention in this electrolyte. The results suggest that MFE is a promising option as nonflammable electrolyte additive for sodium batteries.

  17. Synthesis and tentative identification of novel polybrominated diphenyl ether metabolites in human blood.

    PubMed

    Rydén, Andreas; Nestor, Gustav; Jakobsson, Kristina; Marsh, Göran

    2012-08-01

    Hydroxylated polybrominated diphenyl ethers (OH-PDBEs) are exogenous, bioactive compounds that originate, to a large extent, from anthropogenic activities, although they are also naturally produced in the environment. In the present study nine new authentic OH-PBDE reference standards and their corresponding methyl ether derivatives (MeO-PBDEs) were synthesised and characterised by NMR spectroscopy and mass spectrometry. Seven of the authentic reference standards prepared were thereafter tentatively identified in a pooled human blood sample. The tentatively identified OH-PBDEs were 3-hydroxy-2,2',4,4',6-pentabromodiphenyl ether, 3'-hydroxy-2,2',4,4',6-pentabromodiphenyl ether, 3-hydroxy-2,2',4,4',5-pentabromodiphenyl ether, 3-hydroxy-2,2',4,4',5,6'-hexabromodiphenyl ether, 3'-hydroxy-2,2',4,4',5,6'-hexabromodiphenyl ether, 3-hydroxy-2,2',4,4',5,5'-hexabromodiphenyl ether and 4-hydroxy-2,2',3,4',5,5',6-heptabromodiphenyl ether. An additional seven OH-PBDEs were tentatively identified in the pooled human blood sample, of which one OH-PBDE, 4'-hydroxy-2,2',4,5,5'-pentabromodiphenyl ether, has not been identified in human blood before. The identification was performed using gas chromatography-mass spectrometry (GC-MS) recording the bromine ions m/z 79, 81. The tentative identification was supported by the peaks relative retention times (RRTs) compared to authentic references on two GC columns of different polarities for the hexa-, and heptabrominated OH-PBDEs, and three different GC columns for the pentabrominated OH-PBDEs. The OH-PBDE congeners most likely originate from human metabolism of a flame retardant, i.e. polybrominated diphenyl ethers (PBDEs), due to the relatively high concentrations of PBDEs in the same human blood sample and the fact that these PBDEs could form the tentatively identified OH-PBDEs via metabolic direct hydroxylation or via 1,2-shift. PMID:22572169

  18. Structure and Reactivity of Alkyl Ethers Adsorbed on CeO(2)(111) Model Catalysts

    SciTech Connect

    Calaza, Florencia C; Chen, Tsung-Liang; Mullins, David R; Overbury, Steven {Steve} H

    2011-01-01

    The effect of surface hydroxyls on the adsorption of ether on ceria was explored. Adsorption of dimethyl ether (DME) and diethyl ether (DEE) on oxidized and reduced CeO{sub 2}(111) films was studied and compared with Ru(0001) using RAIRS and sXPS within a UHV environment. On Ru(0001) the ethers adsorb weakly with the molecular plane close to parallel to the surface plane. On the ceria films, the adsorption of the ethers was stronger than on the metal surface, presumably due to stronger interaction of the ether oxygen lone pair electrons with a cerium cation. This interaction causes the ethers to tilt away from the surface plane compared to the Ru(0001) surface. No pronounced differences were found between oxidized (CeO{sub 2}) and reduced (CeOx) films. The adsorption of the ethers was found to be perturbed by the presence of OH groups on hydroxylated CeOx. In the case of DEE, the geometry of adsorption resembles that found on Ru, and in the case of dimethyl ether DME is in between that one found on clean CeOx and the metal surface. Decomposition of the DEE was observed on the OH/CeOx surface following high DEE exposure at 300 K and higher temperatures. Ethoxides and acetates were identified as adsorbed species on the surface by means of RAIRS and ethoxides and formates by s-XPS. No decomposition of dimethyl ether was observed on the OH/CeOx at these higher temperatures, implying that the dissociation of the C-O bond from ethers requires the presence of {beta}-hydrogen.

  19. Structure and Reactivity of Alkyl Ethers Adsorbed on CeO2(111) Model Catalysts

    SciTech Connect

    F Calaza; T Chen; D Mullins; S Overbury

    2011-12-31

    The effect of surface hydroxyls on the adsorption of ether on ceria was explored. Adsorption of dimethyl ether (DME) and diethyl ether (DEE) on oxidized and reduced CeO{sub 2}(111) films was studied and compared with Ru(0001) using RAIRS and sXPS within a UHV environment. On Ru(0001) the ethers adsorb weakly with the molecular plane close to parallel to the surface plane. On the ceria films, the adsorption of the ethers was stronger than on the metal surface, presumably due to stronger interaction of the ether oxygen lone pair electrons with a cerium cation. This interaction causes the ethers to tilt away from the surface plane compared to the Ru(0001) surface. No pronounced differences were found between oxidized (CeO{sub 2}) and reduced (CeOx) films. The adsorption of the ethers was found to be perturbed by the presence of OH groups on hydroxylated CeOx. In the case of DEE, the geometry of adsorption resembles that found on Ru, and in the case of dimethyl ether DME is in between that one found on clean CeOx and the metal surface. Decomposition of the DEE was observed on the OH/CeOx surface following high DEE exposure at 300 K and higher temperatures. Ethoxides and acetates were identified as adsorbed species on the surface by means of RAIRS and ethoxides and formates by s-XPS. No decomposition of dimethyl ether was observed on the OH/CeOx at these higher temperatures, implying that the dissociation of the C-O bond from ethers requires the presence of {beta}-hydrogen.

  20. Thin film composite nanofiltration membranes fabricated from quaternized poly(ether ether ketone) with crosslinkable moiety using a benign solvent.

    PubMed

    Dong, Xue; Zhang, Qifeng; Zhang, Suobo; Li, Shenghai

    2016-02-01

    Thin film composite nanofiltration membranes were fabricated through dip-coating and in situ cross-linking of quaternized poly(ether ether ketone) containing a certain amount of tertiary amine groups (QAPEEKs) on polyacrylonitrile (PAN) support. The effects of the variables in membrane formation such as the coating polymer concentration, the curing temperature, and the cross-linking agent types on resultant membrane were studied and the membrane properties such as the barrier layer chemical structure, the surface element composition and morphology were investigated. The obtained performance of uncross-linked and cross-linked QAPEEK-70 thin film composites in nanofiltration test was compared. The results indicated that the cross-linking improved the composite membranes' performance. For instance, the membrane cross-linked by bisphenol A diglycidyl ether (BPADGE) named M-C-BPADGE exhibited a MgCl2 rejection of 97.8%, a water flux of 11.8Lm(-2)h(-1), a MWCO of 800Da and corresponding pore size of 0.69nm, while for its uncross-linked membrane named M-U, a MgCl2 rejection of 91.2%, a water flux of 13.5Lm(-2)h(-1), a MWCO with 960Da and a pore size of 0.77nm were found. Furthermore, the M-C-BPADGE membrane exhibited selectivities of 16.0 for separation of mixed Mg(2+) and Na(+) cations, much larger than selectivity of 5.2 obtained for M-U, suggesting that the cross-linked membranes are promising in cation separation. PMID:26606594

  1. Metabolism of Diethyl Ether and Cometabolism of Methyl tert-Butyl Ether by a Filamentous Fungus, a Graphium sp

    PubMed Central

    Hardison, L. K.; Curry, S. S.; Ciuffetti, L. M.; Hyman, M. R.

    1997-01-01

    In this study, evidence for two novel metabolic processes catalyzed by a filamentous fungus, Graphium sp. strain ATCC 58400, is presented. First, our results indicate that this Graphium sp. can utilize the widely used solvent diethyl ether (DEE) as the sole source of carbon and energy for growth. The kinetics of biomass accumulation and DEE consumption closely followed each other, and the molar growth yield on DEE was indistinguishable from that with n-butane. n-Butane-grown mycelia also immediately oxidized DEE without the extracellular accumulation of organic oxidation products. This suggests a common pathway for the oxidation of both compounds. Acetylene, ethylene, and other unsaturated gaseous hydrocarbons completely inhibited the growth of this Graphium sp. on DEE and DEE oxidation by n-butane-grown mycelia. Second, our results indicate that gaseous n-alkane-grown Graphium mycelia can cometabolically degrade the gasoline oxygenate methyl tert-butyl ether (MTBE). The degradation of MTBE was also completely inhibited by acetylene, ethylene, and other unsaturated hydrocarbons and was strongly influenced by n-butane. Two products of MTBE degradation, tert-butyl formate (TBF) and tert-butyl alcohol (TBA), were detected. The kinetics of product formation suggest that TBF production temporally precedes TBA accumulation and that TBF is hydrolyzed both biotically and abiotically to yield TBA. Extracellular accumulation of TBA accounted for only a maximum of 25% of the total MTBE consumed. Our results suggest that both DEE oxidation and MTBE oxidation are initiated by cytochrome P-450-catalyzed reactions which lead to scission of the ether bonds in these compounds. Our findings also suggest a potential role for gaseous n-alkane-oxidizing fungi in the remediation of MTBE contamination. PMID:16535667

  2. RATE CONSTANTS FOR THE REACTIONS OF OH RADICALS AND CL ATOMS WITH DI-N-PROPYL ETHER AND DI-N-BUTYL ETHER AND THEIR DEUTERATED ANALOGS. (R825252)

    EPA Science Inventory

    Using relative rate methods, rate constants for the gas-phase reactions of OH radicals and Cl atoms with di-n-propyl ether, di-n-propyl ether-d14, di-n-butyl ether and di-n-butyl ether-d18 have been measured at 296 ? 2 K and atmos...

  3. 40 CFR 721.6181 - Fatty acid, reaction product with substituted oxirane, formaldehyde-phenol polymer glycidyl ether...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... substituted oxirane, formaldehyde-phenol polymer glycidyl ether, substituted proplyamine and...-phenol polymer glycidyl ether, substituted proplyamine and polyethylenepolyamines (generic). (a) Chemical... as fatty acid, reaction product with substituted oxirane, formaldehyde-phenol polymer glycidyl...

  4. 40 CFR 721.6181 - Fatty acid, reaction product with substituted oxirane, formaldehyde-phenol polymer glycidyl ether...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... substituted oxirane, formaldehyde-phenol polymer glycidyl ether, substituted proplyamine and...-phenol polymer glycidyl ether, substituted proplyamine and polyethylenepolyamines (generic). (a) Chemical... as fatty acid, reaction product with substituted oxirane, formaldehyde-phenol polymer glycidyl...

  5. Synthesis of imide/arylene ether copolymers for adhesives and composite matrices

    NASA Technical Reports Server (NTRS)

    Jensen, B. J.; Hergenrother, P. M.; Bass, R. G.

    1991-01-01

    A series of imide/arylene ether copolymers were prepared from the reaction of an amorphous arylene ether oligomer and a semi-crystalline imide oligomer. These copolymers were thermally characterized and mechanical properties were measured. One block copolymer was endcapped and the molecular weight was controlled to provide a material that displayed good compression moldability and attractive adhesion and composite properties.

  6. AN EVALUATION OF THE HUMAN CARCINOGENIC POTENTIAL OF ETHYLENE GLYCOL BUTYL ETHER: INTERIM FINAL POSITION PAPER

    EPA Science Inventory

    In order to determine the merit of a petition to remove ethylene glycol ether (EGBE) from the Agency's Hazardous Air Pollutant (HAP) list, EPA has developed an interim final position paper, An Evaluation of the Human Carcinogenic Potential of Ethylene Glycol Butyl Ether, t...

  7. Synthetically useful Brønsted acid-promoted arylbenzyl ether --> o-benzylphenol rearrangements.

    PubMed

    Luzzio, Frederick A; Chen, Juan

    2009-08-01

    Camphorsulfonic acid in warm fluorobenzene facilitates the ortho rearrangement of (alkoxy-substituted) benzyl ethers of 1-(O-methyl)-2-nitroresorcinols to the corresponding o-(alkoxy-substituted) arylmethylnitrophenols. The substrate phenolic ethers are prepared by ultrasound-promoted arylmethylation of the appropriate 1-alkoxy-substituted 2-nitroresorcinol. PMID:19518072

  8. Effects of Petroleum Ether Extract of Amorphophallus paeoniifolius Tuber on Central Nervous System in Mice

    PubMed Central

    Das, S. S.; Sen, Malini; Dey, Y. N.; De, S.; Ghosh, A. K.

    2009-01-01

    The central nervous system activity of the petroleum ether extract of Amorphophallus paeoniifolius tuber was examined in mice, fed normal as well as healthy conditions. The petroleum ether extract of Amorphophallus paeoniifolius tuber at the doses of 100, 300 and 1000 mg/kg showed significant central nervous system activity in mice. PMID:20376218

  9. Rate constant calculations of H-atom abstraction reactions from ethers by HȮ2 radicals.

    PubMed

    Mendes, Jorge; Zhou, Chong-Wen; Curran, Henry J

    2014-02-27

    In this work, we detail hydrogen atom abstraction reactions from six ethers by the hydroperoxyl radical, including dimethyl ether, ethyl methyl ether, propyl methyl ether, isopropyl methyl ether, butyl methyl ether, and isobutyl methyl ether, in order to test the effect of the functional group on the rate constant calculations. The Møller-Plesset (MP2) method with the 6-311G(d,p) basis set has been employed in the geometry optimizations and frequency calculations of all of the species involved in the above reaction systems. The connections between each transition state and the corresponding local minima have been determined by intrinsic reaction coordinate calculations. Energies are reported at the CCSD(T)/cc-pVTZ level of theory and include the zero-point energy corrections. As a benchmark in the electronic energy calculations, the CCSD(T)/CBS extrapolation was used for the reactions of dimethyl ether + HȮ2 radicals. A systematic calculation of the high-pressure limit rate constants has been performed using conventional transition-state theory, including asymmetric Eckart tunneling corrections, in the temperature range of 500-2000 K. The one dimensional hindrance potentials obtained at MP2/6-311G(d,p) for the reactants and transition states have been used to describe the low frequency torsional modes. Herein, we report the calculated individual, average, and total rate constants. A branching ratio analysis for every reaction site has also been performed. PMID:24483837

  10. Utilization of the hydroxyalkylation reaction to prepare bis(benzocrown ethers)

    PubMed Central

    Zielinski, Matthew; Tracy, Adam F.; Klumpp, Douglas A.

    2012-01-01

    The hydroxyalkylation reaction has been used to condense benzocrown ethers with various aldehydes and ketones. The condensation reactions are catalyzed by triflic or sulfuric acid. The products from the reactions are bis(benzocrown ethers) and they are formed in good yields (42-98%, 13 examples). PMID:22753995

  11. Interactions between ether phospholipids and cholesterol as determined by scattering and molecular dynamics simulations.

    PubMed

    Pan, Jianjun; Cheng, Xiaolin; Heberle, Frederick A; Mostofian, Barmak; Kučerka, Norbert; Drazba, Paul; Katsaras, John

    2012-12-27

    Cholesterol and ether lipids are ubiquitous in mammalian cell membranes, and their interactions are crucial in ether lipid mediated cholesterol trafficking. We report on cholesterol's molecular interactions with ether lipids as determined using a combination of small-angle neutron and X-ray scattering, and all-atom molecular dynamics (MD) simulations. A scattering density profile model for an ether lipid bilayer was developed using MD simulations, which was then used to simultaneously fit the different experimental scattering data. From analysis of the data the various bilayer structural parameters were obtained. Surface area constrained MD simulations were also performed to reproduce the experimental data. This iterative analysis approach resulted in good agreement between the experimental and simulated form factors. The molecular interactions taking place between cholesterol and ether lipids were then determined from the validated MD simulations. We found that in ether membranes cholesterol primarily hydrogen bonds with the lipid headgroup phosphate oxygen, while in their ester membrane counterparts cholesterol hydrogen bonds with the backbone ester carbonyls. This different mode of interaction between ether lipids and cholesterol induces cholesterol to reside closer to the bilayer surface, dehydrating the headgroup's phosphate moiety. Moreover, the three-dimensional lipid chain spatial density distribution around cholesterol indicates anisotropic chain packing, causing cholesterol to tilt. These insights lend a better understanding of ether lipid-mediated cholesterol trafficking and the roles that the different lipid species have in determining the structural and dynamical properties of membrane associated biomolecules. PMID:23199292

  12. Inhibition of dimethyl ether and methane oxidation in Methylococcus capsulatus and Methylosinus trichosporium.

    PubMed Central

    Patel, R; Hou, C T; Felix, A

    1976-01-01

    Metal-chelating or -binding agents inhibited the oxidation of dimethyl ether and methane, but not methanol, by cell suspensions of Methylococcus capsulatus and Methylosinus trichosporium. Evidence suggests that the involvement of metal-containing enzymatic systems in the initial step of oxidation of dimethyl ether and methane. PMID:4428

  13. Crystal morphology and phase identifications in poly(aryl ether ketones)s and their copolymers

    SciTech Connect

    Ho, R.M.; Cheng, S.Z.D.; Hsiao, B.S.

    1995-12-01

    A series of poly(aryl ether ketone ketone)s prepared from diphenyl ether (DPE) and terephthalic acid M or isophthalic acid (T) have been investigated. PEKK(T) has been reported to exhibit two polymorphism (form I and form II) based on wide angle X-ray diffraction (WAXD) and electron diffraction (ED) experiments.

  14. Reaction Pathways and Energetics of Etheric C–O Bond Cleavage Catalyzed by Lanthanide Triflates

    SciTech Connect

    Assary, Rajeev S.; Atesin, Abdurrahman C.; Li, Zhi; Curtiss, Larry A.; Marks, Tobin J.

    2013-09-06

    Efficient and selective cleavage of etheric C-O bonds is crucial for converting biomass into platform chemicals and liquid transportation fuels. In this contribution, computational methods at the DFT B3LYP level of theory are employed to understand the efficacy of lanthanide triflate catalysts (Ln(OTf)3, Ln = La, Ce, Sm, Gd, Yb, and Lu) in cleaving etheric C-O bonds. In agreement with experiment, the calculations indicate that the reaction pathway for C-O cleavage occurs via a C-H → O-H proton transfer in concert with weakening of the C-O bond of the coordinated ether substrate to ultimately yield a coordinated alkenol. The activation energy for this process falls as the lanthanide ionic radius decreases, reflecting enhanced metal ion electrophilicity. Details of the reaction mechanism for Yb(OTf)3-catalyzed ring opening are explored in depth, and for 1-methyl-d3-butyl phenyl ether, the computed primary kinetic isotope effect of 2.4 is in excellent agreement with experiment (2.7), confirming that etheric ring-opening pathway involves proton transfer from the methyl group alpha to the etheric oxygen atom, which is activated by the electrophilic lanthanide ion. Calculations of the catalytic pathway using eight different ether substrates indicate that the more rapid cleavage of acyclic versus cyclic ethers is largely due to entropic effects, with the former C-O bond scission processes increasing the degrees of freedom/particles as the transition state is approached.

  15. Palladium-Catalyzed Selective α-Alkenylation of Pyridylmethyl Ethers with Vinyl Bromides.

    PubMed

    Yang, Xiaodong; Kim, Byeong-Seon; Li, Minyan; Walsh, Patrick J

    2016-05-20

    An efficient palladium-catalyzed α-alkenylation of pyridylmethyl ethers with vinyl bromides is presented. A Pd/NIXANTPHOS-based catalyst system enables a mild and chemoselective coupling between a variety of pyridylmethyl ethers and vinyl bromides in good to excellent yields. Under the mild conditions, β,γ-unsaturated products are obtained without isomerization or Heck byproducts observed. PMID:27160421

  16. Reactions of perfluoro-1-alkylcycloalkenes with alcohols and properties of vinyl ethers formed

    SciTech Connect

    Snegirev, V.F.; Makarov, K.N.

    1986-12-10

    Perfluoro-1-alkylcycloalkenes react with alcohols to form products of vinyl and allyl substitution. Alkyl perfluorocycloakenyl ethers readily alkylate the fluoride ion and triethylamine, and by the action of SbF/sub 5/ convert into ..cap alpha.., ..beta..-unsaturated perfluoro ketones. When allyl perfluorocycloalkenyl ethers are heated, they isomerize into the corresponding ..cap alpha..-allylperfluorocycloalkanones.

  17. 40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide...

  18. 40 CFR 721.10605 - Polyoxyalkylene ether, polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (generic).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Polyoxyalkylene ether, polymer with..., polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (generic). (a) Chemical substance and... polyoxyalkylene ether, polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (PMN P-11-485) is...

  19. 40 CFR 721.10605 - Polyoxyalkylene ether, polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (generic).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Polyoxyalkylene ether, polymer with..., polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (generic). (a) Chemical substance and... polyoxyalkylene ether, polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked (PMN P-11-485) is...

  20. 40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide...

  1. 40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide...

  2. Thermal [2 + 2]-Cycloaddition of Ketenes with Chiral Enol Ethers: Route to Densely Substituted Cyclobutanones.

    PubMed

    Rullière, Pauline; Grisel, Julien; Poittevin, Clément; Cividino, Pascale; Carret, Sébastien; Poisson, Jean-François

    2016-06-17

    Access to chiral polysubstituted cyclobutanones by [2 + 2]-cycloaddition of ketenes with chiral acyclic enol ethers is reported. A wide variety of easily accessible di- and monosubstituted ketenes were found to react with a very high degree of stereoselectivity with chiral, Stericol derived, acyclic enol ethers. This combination of simple reagents provides straightforward entry to highly substituted enantioenriched cyclobutanones. PMID:27232587

  3. Mild Ti-mediated transformation of t-butyl thio-ethers into thio-acetates.

    PubMed

    Pijper, Thomas C; Robertus, Jort; Browne, Wesley R; Feringa, Ben L

    2015-01-01

    We report a straightforward method for the rapid conversion of thio-ethers to thio-acetates using TiCl4, in good to excellent yields. The reaction conditions tolerate a variety of functional groups, including halide, nitro, ether, thiophene and acetylene functionalities. A catalytic variant of this reaction is also described. PMID:25407165

  4. SOLUTION EFFECTS ON CESIUM COMPLEXATION WITH CALIXARENE CROWN ETHERS FROM LIQUID TO SUPERCRITICAL FLUIDS

    EPA Science Inventory

    Calixarene-crown ethers with rigid skeletons are superior to flexible crown ethers for separation of 137Cs from high level waste (HLW). However, this extraction methodology often requires undesirable solvents and the extraction efficiency is strongly dependent on the solvent pol...

  5. 40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide...

  6. 40 CFR 721.7046 - Formaldehyde, polymer with substituted phenols, glycidyl ether.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... phenols, glycidyl ether. 721.7046 Section 721.7046 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.7046 Formaldehyde, polymer with substituted phenols... substance identified as formaldehyde, polymer with substituted phenols, glycidyl ether (PMN P-93-955)...

  7. 40 CFR 721.7046 - Formaldehyde, polymer with substituted phenols, glycidyl ether.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... phenols, glycidyl ether. 721.7046 Section 721.7046 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.7046 Formaldehyde, polymer with substituted phenols... substance identified as formaldehyde, polymer with substituted phenols, glycidyl ether (PMN P-93-955)...

  8. 40 CFR 721.7046 - Formaldehyde, polymer with substituted phenols, glycidyl ether.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... phenols, glycidyl ether. 721.7046 Section 721.7046 Protection of Environment ENVIRONMENTAL PROTECTION... New Uses for Specific Chemical Substances § 721.7046 Formaldehyde, polymer with substituted phenols... substance identified as formaldehyde, polymer with substituted phenols, glycidyl ether (PMN P-93-955)...

  9. PROGRAM TO DETERMINE PERFORMANCE OF FLUORINATED ETHERS AND FLUORINATED PROPANES IN A COMPRESSOR CALORIMETER

    EPA Science Inventory

    The paper discusses a program to determine the performance of fluorinated ethers and fluorinated propanes in a compressor calorimeter. These chlorine free ethers and propanes are being considered as potential long-term replacements for CFC-11, -12, -114, and -115. A standard comp...

  10. Interactions between Ether Phospholipids and Cholesterol as Determined by Scattering and Molecular Dynamics Simulations

    SciTech Connect

    Pan, Jianjun; Cheng, Xiaolin; Heberle, Frederick A; Mostofian, Barmak; Kucerka, Norbert; Drazba, Paul; Katsaras, John

    2012-01-01

    Cholesterol and ether lipids are ubiquitous in mammalian cell membranes, and their interactions are crucial in ether lipid mediated cholesterol trafficking. We report on cholesterol s molecular interactions with ether lipids as determined using a combination of small-angle neutron and Xray scattering, and all-atom molecular dynamics (MD) simulations. A scattering density profile model for an ether lipid bilayer was developed using MD simulations, which was then used to simultaneously fit the different experimental scattering data. From analysis of the data the various bilayer structural parameters were obtained. Surface area constrained MD simulations were also performed to reproduce the experimental data. This iterative analysis approach resulted in good agreement between the experimental and simulated form factors. The molecular interactions taking place between cholesterol and ether lipids were then determined from the validated MD simulations. We found that in ether membranes cholesterol primarily hydrogen bonds with the lipid headgroup phosphate oxygen, while in their ester membrane counterparts cholesterol hydrogen bonds with the backbone ester carbonyls. This different mode of interaction between ether lipids and cholesterol induces cholesterol to reside closer to the bilayer surface, dehydrating the headgroup s phosphate moiety. Moreover, the three-dimensional lipid chain spatial density distribution around cholesterol indicates anisotropic chain packing, causing cholesterol to tilt. These insights lend a better understanding of ether lipid-mediated cholesterol trafficking and the roles that the different lipid species have in determining the structural and dynamical properties of membrane associated biomolecules.

  11. Construction of supramolecular organogels and hydrogels from crown ether based unsymmetric bolaamphiphiles.

    PubMed

    Gao, Lingyan; Xu, Donghua; Zheng, Bo

    2014-10-18

    A bolaamphiphilic low-molecular-weight gelator based on crown ether, which could self-assemble into organogels and hydrogels, was prepared. The contribution of each part of the structure to the gelation property was investigated by designing a series of analogues. A simple framework (crown ether-hydrophobic linkage-ammonium salt) was proposed. PMID:25174940

  12. 40 CFR 721.7000 - Polymer of disodium maleate, allyl ether, and ethylene oxide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Polymer of disodium maleate, allyl... New Uses for Specific Chemical Substances § 721.7000 Polymer of disodium maleate, allyl ether, and... substance identified generically as a polymer of disodium maleate, allyl ether, and ethylene oxide...

  13. Behavioral teratology of ethylene glycol monomethyl and monoethyl ethers

    SciTech Connect

    Nelson, B.K.; Brightwell, W.S.

    1984-08-01

    A recent addition to the field of teratology has been the inclusion of functional assessment techniques of offspring after prenatal exposure to exogenous agents. The present paper reviews the behavioral teratogenic effects of ethylene glycol monomethyl ether (EGME, 2-methoxyethanol) and ethylene glycol monoethyl ether (EGEE, 2-ethoxyethanol). Groups of 15 pregnant rats were exposed via inhalation to 25 ppm EGME or to 100 ppm EGEE on gestation days 7 to 13 or 14 to 20. An equal number of sham-exposed controls were included for both periods of gestation. The only effect noted in the maternal animals was a slightly prolonged gestation in the group exposed to 100 ppm EGEE on days 14 to 20. Litters were culled in four female and four male pups on the day of birth. Pups of each sex from all litters were tested on a variety of behavioral tasks (including tests of neuromuscular ability, activity, and learning ability) extending from postnatal days 10 to 90. In addition, brains from newborn and from 21-day-old offspring were removed and analyzed for concentrations of the neurotransmitters acetylcholine, dopamine, norepinephrine, and 5-hydroxytryptamine (serotonin). Both the behavioral testing and the neurochemical evaluations revealed functional alterations in the litter groups experiencing prenatal exposure to EGME and EGEE at concentrations which produced no observable effects in the maternal animals. 6 references, 3 tables.

  14. High octane ethers from synthesis gas-derived alcohols

    SciTech Connect

    Klier, K.; Herman, R.G.; DeTavernier, S.; Johannson, M.; Kieke, M.; Bastian, R.D.

    1991-07-01

    The temperature dependence of ether synthesis, particularly unsymmetric methylisobutylether (MIBE), was carried out over the Nafion-H microsaddles (MS) catalyst. The principal product formed under the rather severe reaction conditions of 1100 psig pressure and temperatures in the range of 123--157{degree}C was the expected MIBE formed directly by coupling the methanol/isobutanol reactants. In addition, significantly larger quantities of the dimethylether (DME) and hydrocarbon products were observed than were obtained under milder reaction conditions. Deactivation of the Nafion-H MS catalyst was determined by periodically testing the catalyst under a given set of reaction conditions for the synthesis of MIBE and MTBE from methanol/isobutanol = 2/1, i.e. 123{degree}C, 1100 psig, and total GHSV = 248 mol/kg cat/hr. After carrying out various tests over a period of 2420 hr, with intermittant periods of standing under nitrogen at ambient conditions, the yields of MIBE and MTBE had decreased by 25% and 41%, respectively. In order to gain insight into the role of the surface acidity in promoting the selective coupling of the alcohols to form the unsymmetric ether, the strengths of the acid sites on the catalysts are still being probed by calorimetric titrations in non-aqueous solutions. 11 refs., 13 figs., 9 tabs.

  15. Diphytanyl glycerol ether distributions in sediments of the Orca Basin

    SciTech Connect

    Pease, T.K.; VanVleet, E.S.; Barre, J.S. )

    1992-09-01

    Archaebacterially produced diphytanyl glycerol ether (DPGE) was examined in core sediments from the Orca Basin, an anoxic hypersaline basin in the northwestern Gulf of Mexico, to observe its spatial variability and potential origin. A differential extraction protocol was employed to quantify the isopranyl glycerol ethers associated with unbound, intermediate-bound, and kerogen-bound lipid fractions. Archaebacterial lipids were evident at all depths for the unbound and intermediate-bound fractions. Concentrations of DPGE ranged from 0.51 to 2.91 [mu]g/g dry sediment at the surface and showed secondary maxima deeper in basin sediments. Intermediate-bound DPGE concentrations exhibited an inverse relationship to unbound DPGE concentrations. Kerogen-bound DPGE concentrations were normally below detection limits. Earlier studies describing the general homogeneity of lipid components within the overlying brine and at the brine/seawater interface suggest that the large-scale sedimentary DPGE variations observed in this study result from spatial and temporal variations in in-situ production by methanogenic or extremely halophilic archaebacteria.

  16. Diphytanyl glycerol ether distributions in sediments of the Orca Basin

    NASA Astrophysics Data System (ADS)

    Pease, Tamara K.; Van Vleet, Edward S.; Barre, Jill S.

    1992-09-01

    Archaebacterially produced diphytanyl glycerol ether (DPGE) was examined in core sediments from the Orca Basin, an anoxic hypersaline basin in the northwestern Gulf of Mexico, to observe its spatial variability and potential origin. A differential extraction protocol was employed to quantify the isopranyl glycerol ethers associated with unbound, intermediate-bound, and kerogen-bound lipid fractions. Archaebacterial lipids were evident at all depths for the unbound and intermediate-bound fractions. Concentrations of DPGE ranged from 0.51 to 2.91 μg/g dry sediment at the surface and showed secondary maxima deeper in basin sediments. Intermediate-bound DPGE concentrations exhibited an inverse relationship to unbound DPGE concentrations. Kerogen-bound DPGE concentrations were normally below detection limits. Earlier studies describing the general homogeneity of lipid components within the overlying brine and at the brine/seawater interface suggest that the large-scale sedimentary DPGE variations observed in this study result from spatial and temporal variations in in situ production by methanogenic or extremely halophilic archaebacteria.

  17. Developmental toxicity of diphenyl ether herbicides in nestling American kestrels.

    PubMed

    Hoffman, D J; Spann, J W; LeCaptain, L J; Bunck, C M; Rattner, B A

    1991-11-01

    Beginning the day after hatching, American kestrel (Falco sparverius) nestlings were orally dosed for 10 consecutive days with 5 microliters/g of corn oil (controls) or one of the diphenyl ether herbicides (nitrofen, bifenox, or oxyfluorfen) at concentrations of 10, 50, 250, or 500 mg/kg in corn oil. At 500 mg/kg, nitrofen resulted in complete nestling mortality, bifenox in high (66%) mortality, and oxyfluorfen in no mortality. Nitrofen at 250 mg/kg reduced nestling growth as reflected by decreased body weight, crown-rump length, and bone lengths including humerus, radius-ulna, femur, and tibiotarsus. Bifenox at 250 mg/kg had less effect on growth than nitrofen, but crown-rump, humerus, radius-ulna, and femur were significantly shorter than controls. Liver weight as a percent of body weight increased with 50 and 250 mg/kg nitrofen. Other manifestations of impending hepatotoxicity following nitrofen ingestion included increased hepatic GSH peroxidase activity in all nitrofen-treated groups, and increased plasma enzyme activities for ALT, AST, and LDH-L in the 250-mg/kg group. Bifenox ingestion resulted in increased hepatic GSH peroxidase activity in the 50- and 250-mg/kg groups. Nitrofen exposure also resulted in an increase in total plasma thyroxine (T4) concentration. These findings suggest that altricial nestlings are more sensitive to diphenyl ether herbicides than young or adult birds of precocial species. PMID:1942122

  18. Green mechanochemical oxidative decomposition of powdery decabromodiphenyl ether with persulfate.

    PubMed

    Huang, Aizhen; Zhang, Zhimin; Wang, Nan; Zhu, Lihua; Zou, Jing

    2016-01-25

    A method was developed for efficiently degrading powdery decabromodiphenyl ether (BDE209) by using mechanochemical (MC) activation of persulfate (PS). Characteristic Raman spectra of BDE209 corresponding to CBr and CO bonds were decreased in intensity and finally disappeared as the MC reaction proceeded. The BDE209 removal was influenced by the molar ratio of PS to BDE209, the mass ratio of milling ball to reaction mixtures, the ball size, and the ball rotation speed. Under optimal conditions, the new method could achieve a complete degradation, debromination and mineralization of BDE209 within 3h of milling. However, the degradation removal (or debromination efficiency) was decreased to only 51.7% (15.6%) and 67.8% (31.5%) for the use of CaO and peroxymonosulfate, respectively. The analyses of products demonstrated that once the degradation was initiated, BDE209 molecules were deeply debrominated and fully mineralized in the MC-PS system. The strong oxidizing ability of this system was due to the reactive sulfate radicals generated from the MC-enhanced activation of PS, which was confirmed with electron spin resonance spectroscopy. Because no toxic low brominated polybrominated diphenyl ethers were accumulated as byproducts, the proposed MC oxidative degradation method will have promising applications in the treatment of solid BDE209 at high concentrations. PMID:26474378

  19. Novel Ordered Crown Ether-Containing Polyimides for Ion Conduction

    NASA Technical Reports Server (NTRS)

    Irvin, Jennifer A.; Stasko, Daniel; Fallis, Stephen; Guenthner, Andrew J.; Webber, Cynthia; Blackwell, John; Chvalun, Sergei N.

    2003-01-01

    We report the synthesis and characterization of thermally-stable polyimides for use as battery and fuel cell electrolyte membranes. Dianhydrides used were 1,4,5,8- naphthalenetetracarboxylic dianhydride and/or 4,4'-(hexafluoroisopropylidene)diphthalic anhydride. Diamines used were anti-4,4-diaminodibenzo-l8-crown-6, 4,4'- diaminodibenzo-24-crown-8, 2,2-bis(4-aminophenyl)hexafluoropropane, and/or 2,5- diaminobenzenesulfonic acid. The polymers were characterized using electrochemical impedance spectroscopy (EIS), thermal analysis and X-ray diffraction. Polymers containing the hexafluoroisopropylidene (HFIP) group were soluble in common organic solvents, while polymers without the HFIP group were very poorly soluble. Sulfonation yields polymers that are sparingly soluble in aqueous base and/or methanol. Degree of sulfonation, determined by titration, was between one and three sulfonate groups per repeat unit. Proton conductivity was determined as a function of water content, with a maximum conductivity of l x 10(exp -2) per centimeter when fully hydrated. Crown ether-containing polymers exhibit a high degree of order that may be indicative of crown ether channel formation, which may facilitate Li(+) transport for use in battery membranes.

  20. Diphytanyl glycerol ether distributions in sediments of the Orca Basin.

    PubMed

    Pease, T K; Van Vleet, E S; Barre, J S

    1992-09-01

    Archaebacterially produced diphytanyl glycerol ether (DPGE) was examined in core sediments from the Orca Basin, an anoxic hypersaline basin in the northwestern Gulf of Mexico, to observe its spatial variability and potential origin. A differential extraction protocol was employed to quantify the isopranyl glycerol ethers associated with unbound, intermediate-bound, and kerogen-bound lipid fractions. Archaebacterial lipids were evident at all depths for the unbound and intermediate-bound fractions. Concentrations of DPGE ranged from 0.51 to 2.91 micrograms/g dry sediment at the surface and showed secondary maxima deeper in basin sediments. Intermediate-bound DPGE concentrations exhibited an inverse relationship to unbound DPGE concentrations. Kerogen-bound DPGE concentrations were normally below detection limits. Earlier studies describing the general homogeneity of lipid components within the overlying brine and at the brine/seawater interface suggest that the large-scale sedimentary DPGE variations observed in this study result from spatial and temporal variations in in situ production by methanogenic or extremely halophilic archaebacteria. PMID:11540108

  1. Developmental toxicity of diphenyl ether herbicides in nestling American kestrels

    USGS Publications Warehouse

    Hoffman, D.J.; Spann, J.W.; LeCaptain, L.J.; Bunck, C.M.; Rattner, B.A.

    1991-01-01

    Beginning the day after hatching, American kestrel (Falco sparverius) nestlings were orally dosed for 10 consecutive days with 5 microliters/g of corn oil (controls) or one of the diphenyl ether herbicides (nitrofen, bifenox, or oxyfluorfen) at concentrations of 10, 50, 250, or 500 mg/kg in corn oil. At 500 mg/kg, nitrofen resulted in complete nestling mortality, bifenox in high (66%) mortality, and oxyfluorfen in no mortality. Nitrofen at 250 mg/kg reduced nestling growth as reflected by decreased body weight, crownrump length, and bone lengths including humerus, radiusulna, femur, and tibiotarsus. Bifenox at 250 mg/kg had less effect on growth than nitrofen, but crownrump, humerus, radiusulna, and femur were significantly shorter than controls. Liver weight as a percent of body weight increased with 50 and 250 mg/kg nitrofen. Other manifestations of impending hepatotoxicity following nitrofen ingestion included increased hepatic GSH peroxidase activity in all nitrofentreated groups, and increased plasma enzyme activities for ALT, AST, and LDHL in the 250mg/kg group. Bifenox ingestion resulted in increased hepatic GSH peroxidase activity in the 50and 250mg/kg groups. Nitrofen exposure also resulted in an increase in total plasma thyroxine (T4) concentration. These findings suggest that altricial nestlings are more sensitive to diphenyl ether herbicides than young or adult birds of precocial species.

  2. Aerobic biotransformation of polybrominated diphenyl ethers (PBDEs) by bacterial isolates

    PubMed Central

    Robrock, Kristin R.; Coelhan, Mehmet; Sedlak, David; Alvarez-Cohen, Lisa

    2009-01-01

    Polybrominated diphenyl ethers (PBDEs) are flame retardants that have been used in consumer products and furniture for three decades. Currently, very little is known about their fate in the environment and specifically about their susceptibility to aerobic biotransformation. Here, we investigated the ability of the polychlorinated biphenyl (PCB) degrading bacteria Rhodococcus jostii RHA1 and Burkholderia xenovorans LB400 to transform mono- through hexa-BDEs at ppb levels. We also tested the PBDE transforming abilities of related strain Rhodococcus sp. RR1 and the ether-degrading Pseudonocardia dioxanivorans CB1190. The two PCB-degrading strains transformed all of the mono- through penta-BDEs and strain LB400 transformed one of the hexa-BDEs. The extent of transformation was inversely proportional to the degree of bromination. Strains RR1 and CB1190 were only able to transform the less brominated mono- and di- BDE congeners. RHA1 released stoichiometric quantities of bromide while transforming mono- and tetra-BDE congeners. LB400 instead converted most of a mono-BDE to a hydroxylated mono-BDE. This is the first report of aerobic transformation of tetra-, penta- and hexa-BDEs as well as the first report of stoichiometric release of bromide during PBDE transformation. PMID:19731666

  3. The synthesis of poly(ether ether ketone) (PEEK) derived from 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,3,3,4,4,4-heptafluorobutane

    SciTech Connect

    Peterman, J.A.; Feld, W.A.

    1995-12-31

    Poly(ether ether ketone)s (PEEK) are of interest due to their high thermal stability. Most PEEK materials are prepared by aromatic nucleophilic substitution between an activated aromatic dihalide and an alkali-metal bisphenolate in polar, aprotic solvents. We now report the preparation of a PEEK containing an extended fluorocarbon chain in the bisphenol, analogous to that produced by McGrath, et. al which contained a trifluoromethyl group in the bisphenol, and examine the effect on thermal properties.

  4. High-pressure liquid chromatography: A brief introduction and its application in analyzing the degradation of a C-ether (Thio-ether) liquid lubricant

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The general principles of classical liquid chromatography and high pressure liquid chromatography (HPLC) are reviewed, and their advantages and disadvantages are compared. Several chromatographic techniques are reviewed, and the analytical separation of a C-ether liquid lubricant by each technique is illustrated. A practical application of HPLC is then demonstrated by analyzing a degraded C-ether liquid lubricant from full scale, high temperature bearing tests.

  5. Stereoselective Synthesis of the C9-C19 Fragment of Lyngbyaloside B and C via Ether Transfer

    PubMed Central

    Stefan, Eric; Taylor, Richard E.

    2012-01-01

    A stereoselective synthesis of the C9-C19 fragment of lyngbyaloside B and C highlighted, by an extension of our ether transfer methodology, enables the formation of tertiary ethers. 2-Naphthylmethyl ethers have been shown to proceed efficiently through ether transfer with high stereoselectivity and are easily deprotected by DDQ oxidation. Variation of the workup conditions results in the stereoselective formation of syn-1,3-diol mono- or diethers. PMID:22716968

  6. High octane ethers from synthesis gas-derived alcohols. Technical progress report, July 1, 1991--September 30, 1991

    SciTech Connect

    Klier, K.; Herman, R.G.; Johannson, M.; Feeley, O.C.; Bogar, S.; Lawson, E.; Kieke, M.

    1991-11-01

    The objective of the proposed research is to synthesize high octane ethers, primarily methyl isobuty ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from H{sub 2}/CO/CO{sub 2} coal-derived synthesis gas via alcohol mixtures that are rich in methanol and 2-methyl-1-butanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers.

  7. Degradation of Perfluorinated Ether Lubricants on Pure Aluminum Surfaces: Semiempirical Quantum Chemical Modeling

    NASA Technical Reports Server (NTRS)

    Slaby, Scott M.; Ewing, David W.; Zehe, Michael J.

    1997-01-01

    The AM1 semiempirical quantum chemical method was used to model the interaction of perfluoroethers with aluminum surfaces. Perfluorodimethoxymethane and perfluorodimethyl ether were studied interacting with aluminum surfaces, which were modeled by a five-atom cluster and a nine-atom cluster. Interactions were studied for edge (high index) sites and top (low index) sites of the clusters. Both dissociative binding and nondissociative binding were found, with dissociative binding being stronger. The two different ethers bound and dissociated on the clusters in different ways: perfluorodimethoxymethane through its oxygen atoms, but perfluorodimethyl ether through its fluorine atoms. The acetal linkage of perfluorodimeth-oxymethane was the key structural feature of this molecule in its binding and dissociation on the aluminum surface models. The high-index sites of the clusters caused the dissociation of both ethers. These results are consistent with the experimental observation that perfluorinated ethers decompose in contact with sputtered aluminum surfaces.

  8. Boundary lubrication of formulated C-ethers in air to 300 C

    NASA Technical Reports Server (NTRS)

    Jones, W. R., Jr.

    1975-01-01

    Friction and wear measurements were made in dry and moist air on CVM M-50 steel lubricated with six C-ether formulations containing phosphorus ester and organic acid additives. Results were compared to those obtained with a formulated Type 2 ester and the C-ether base fluid. A ball-on-disk sliding friction apparatus was used. Experimental conditions were a 1-kilogram load, 17 meter-per-minute (100 rpm) surface speed, and a 25 to 300 C disk temperature range. The C-ether base fluid and the C-ether formulations yielded lower wear than the ester under most test conditions. The C-ether formulations exhibited higher friction coefficients than the ester from 150 to 300 C and similar or lower values from 25 to 150 C.

  9. Halogen derivatives of benzo- and dibenzocrown ethers: synthesis, structure, properties and application

    NASA Astrophysics Data System (ADS)

    Pluzhnik-Gladyr, S. M.

    2016-02-01

    Methods of synthesis of halogenated benzo- and dibenzocrown ether derivatives are surveyed: halogenation of benzo- and dibenzocrown ethers with molecular halogens, N-halosuccinimides in the solid phase and different media (water, ethanol, halohydrocarbons) and hypohalites in water, as well as the 'assembly' method. Reactions of these compounds are considered: synthesis of phosphorus-containing crown ethers, organometallic synthesis, the Heck and Sonogashira reactions, synthesis of acetylene derivatives and other reactions. Special attention is focused on the complexing properties of halogenated benzocrown ethers with respect to ionic guests and neutral organic molecules. The possibility of synthesis of complexes of such compounds in the solid phase is demonstrated. The extraction and sorption properties of halogenated benzo- and dibenzocrown ethers are considered. Examples of practical use of these compounds are presented. The bibliography includes 203 references.

  10. Metal ion complexation by ionizable crown ethers. Progress report, January 1, 1991--December 31, 1993

    SciTech Connect

    Bartsch, R.A.

    1993-07-01

    Cyclic and acyclic polyether compounds with pendent carboxylic acid, phosphonic acid monoethyl ester, sulfonic acid, phosphinic acid and hydroxamic acid groups have been synthesized. The proton-ionizable polyethers can come with and without lipophilic groups. Two types of lipophilic di-ionizable lariat ethers have been prepared. Conformations of proton-ionizable lariat ethers have been probed. Competitive alkali metal cation transport by syn-(decyl)dibenzo-16-crown-5-oxyacetic acid and lipophilic proton-ionizable dibenzo lariat ethers in polymer-supported liquid membranes was studied. Complexation of alkali metal cations with ionized lariat ethers was studied. Condensation polymerization of cyclic and acyclic dibenzo polyethers containing pendent mono-ionizable groups with formaldehyde produces novel ion exchange resins with both ion exchange sites for metal ion complexation and polyether binding sites for metal ion recognition. Resins prepared from lariat ether dibenzo phosphonic acid monoethyl esters show strong sorption of divalent heavy metal cations with selectivity for Pb{sup 2+}.

  11. Interaction of water with different cellulose ethers: a Raman spectroscopy and environmental scanning electron microscopy study.

    PubMed

    Fechner, P M; Wartewig, S; Kiesow, A; Heilmann, A; Kleinebudde, P; Neubert, R H H

    2005-06-01

    Different non-ionic cellulose ethers like methyl cellulose (MC), hydroxypropyl cellulose (HPC) and hydroxypropylmethyl cellulose (HPMC) were investigated. The characterization of the cellulose ethers was carried out by thermogravimetry and sorption/desorption isotherms. Differences in the properties of the cellulose ether films were described by time-dependent contact angle measurements. Changes in molecular structure of the raw materials, gels and films caused by water contact were studied using Raman spectroscopy. Differences between the substitution types and changes due to the gel or film formation were observed. An environmental scanning electron microscopy (ESEM) technique was used to distinguish the morphological behaviour of the cellulose ether films in contact with water. Based on in-situ ESEM experiments, the swelling and drying behaviour of the various stages of cellulose ether films (film-hydrated film-dried film) were quantified by using image analysis. PMID:15969923

  12. Remote Electronic Effects by Ether Protecting Groups Fine-Tune Glycosyl Donor Reactivity.

    PubMed

    Heuckendorff, Mads; Poulsen, Lulu Teressa; Jensen, Henrik H

    2016-06-17

    It was established that para-substituted benzyl ether protecting groups affect the reactivity of glycosyl donors of the thioglycoside type with the N-iodosuccinimide/triflic acid promoter system. Having electron donating p-methoxybenzyl ether (PMB) groups increased the reactivity of the donor in comparison to having electron withdrawing p-chloro (PClB) or p-cyanobenzyl ether (PCNB) protecting groups, which decreased the reactivity of the glycosyl donor relative to the parent benzyl ether (Bn) protected glycosyl donor. These findings were used to perform the first armed-disarmed coupling between two benzylated glucosyl donors by tuning their reactivity. In addition, the present work describes a highly efficient palladium catalyzed multiple cyanation and methoxylation of p-chlorobenzyl protected thioglycosides. The results of this paper regarding both the different electron withdrawing properties of various benzyl ethers and the efficient and multiple protecting group transformations are applicable in general organic chemistry and not restricted to carbohydrate chemistry. PMID:27224456

  13. Phytochemical comparison between Pet ether and ethanolic extracts of Bacopa monnieri, Evolvulus alsinoides and Tinospora cordifolia.

    PubMed

    Gupta, Avneet; Raj, Hem; Sharma, Bhartendu; Upmanyu, Neeraj

    2014-04-01

    Bacopa monnieri, Evolvulus alsinoides and Tinospora cordifolia are established ayurvedic herbs having neuropharmacological effect. In present study is aimed to Phytochemical Comparison between Pet ether and Ethanolic extracts of Bacopa monnieri (BME), Evolvulus alsinoides (EAE) and Tinospora cordifolia (TCE). To identify the presence (+) or absence (-) of different phytoconstituents in Pet ether and Ethanolic extracts of BME, EAE and TCE by using various phytochemical testing methods. Phytochemical investigation showed the presence of various phytochemical constituents in Pet ether and Ethanolic extracts of BME, EAE and TCE. When comparison between Pet ether and Ethanolic extracts of BME, EAE and TCE; Ethanolic extracts of these plants showed more phytoconstituents as compared to Pet ether extracts of these plants. From present investigation, it can be concluded that phytochemical comparison is subsequently momentous and useful in finding chemical constituents in the plant substances that may lead to their quantitative evaluation and also pharmacologically active chemical compounds. PMID:25911854

  14. Sorbents based on crown ethers: preparation and application for the sorption of strontium

    NASA Astrophysics Data System (ADS)

    Bezhin, N. A.; Dovhyi, I. I.

    2015-12-01

    The key approaches to the synthesis of crown ether-based sorbents, including immobilization both with and without covalent bonding, are reviewed. Examples of sorbent preparation using anodic oxidation, chemical modification of polymers, polycondensation reactions, chemical modification of inorganic supports and radiochemical synthesis for covalent bonding of crown ether moieties are considered. Immobilization methods without covalent bonding including support synthesis in the presence of crown ethers, impregnation of supports with a crown ether solution and the use of powdered crown ether as a sorbent are presented. The applications of sorbents for selective removal of strontium from solutions of radioactive waste and spent nuclear fuel, for radiochemical analysis (determination of strontium in water, soil and biological materials) and for separation of strontium and yttrium isotopes are discussed. The bibliography includes 114 references.

  15. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  16. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  17. 40 CFR 721.6980 - Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... glycol, bisphenol A-diglycidyl ether, and alky-lenepolyols polyglycidyl ethers (generic name). 721.6980... Substances § 721.6980 Dimer acids, polymer with polyalkylene glycol, bisphenol A-diglycidyl ether, and alky... reporting. (1) The chemical substance dimer acids, polymer with polyalkylene glycol, bisphenol...

  18. Polybrominated Diphenyl Ethers Alter Hepatic Phosphoenolpyruvate Carboxykinase Enzyme Kinetics in Male Wistar Rats: Implications for Lipid and Glucose Metabolism

    EPA Science Inventory

    Polybrominated diphenyl ethers (PBDE) are a family of lipophilic brominated flame-retardants consisting of 209 possible congeners. Three PBDE commercially-produced mixtures are decabrominated diphenyl ether (e.g. deca-BDE or DE-83R); octabrominated diphenyl ether (e.g. octa-BDE o...

  19. 40 CFR 721.10209 - Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic). 721.10209 Section 721.10209 Protection... Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic... identified generically as epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of...

  20. 40 CFR 721.10209 - Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic). 721.10209 Section 721.10209 Protection... Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic... identified generically as epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of...

  1. 40 CFR 721.10209 - Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic). 721.10209 Section 721.10209 Protection... Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic... identified generically as epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of...

  2. 40 CFR 721.10209 - Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic). 721.10209 Section 721.10209 Protection... Epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of phenol-formaldehyde resin (generic... identified generically as epoxy terminated, hydrolyzed trialkoxysilane and glycidyl ether of...

  3. Hydrogen bond cross-linked sulfonated poly(imino ether ether ketone) (PIEEK) for fuel cell membranes

    NASA Astrophysics Data System (ADS)

    Chang, Guanjun; Shang, Zhenfang; Yang, Li

    2015-05-01

    A new diamine monomer, 3,3‧-dihydroxydiphenylamine, is prepared by the palladium catalyzed C-N coupling reaction and the following reduction reaction of 3-bromoanisole and m-anisidine. A series of novel hydrogen bond cross-linked sulfonated poly(imino ether ether ketone) (SPIEEK) are obtained by the copolymerization of sodium 5,5‧-carbonylbis(2-fluorobenzene sulfonate), 4,4‧-difluorobenzophenone with 3,3‧-dihydroxydiphenylamine. The structures of resulting polymers are characterized by means of FT-IR, 1H NMR spectroscopy, and elemental analysis; the results show an agreement with the proposed structure. The resulting SPIEEK membranes display much better resistance to swelling than these without imino groups due to the strong interchain interaction through imino and sulfonic acid groups. The SPIEEK-60 and SPIEEK-80 membrane show the proton conductivity of 0.118 and 0.154 S cm-1 at 80 °C which is higher than Nafion 117 (0.082 S cm-1 at 80 °C). Moreover, the SPIEEK membranes exhibit good mechanical properties and lower methanol permeability due to the hydrogen bondings between the polymer chains.

  4. Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells.

    PubMed

    Tanaka, Manabu; Fukasawa, Keita; Nishino, Eriko; Yamaguchi, Susumu; Yamada, Koji; Tanaka, Hirohisa; Bae, Byungchan; Miyatake, Kenji; Watanabe, Masahiro

    2011-07-13

    Anion conductive aromatic multiblock copolymers, poly(arylene ether)s containing quaternized ammonio-substituted fluorene groups, were synthesized via block copolycondensation of fluorene-containing (later hydrophilic) oligomers and linear hydrophobic oligomers, chloromethylation, quaternization, and ion-exchange reactions. The ammonio groups were selectively introduced onto the fluorene-containing units. The quaternized multiblock copolymers (QPEs) produced ductile, transparent membranes. A well-controlled multiblock structure was responsible for the developed hydrophobic/hydrophilic phase separation and interconnected ion transporting pathway, as confirmed by scanning transmission electron microscopic (STEM) observation. The ionomer membranes showed considerably higher hydroxide ion conductivities, up to 144 mS/cm at 80 °C, than those of existing anion conductive ionomer membranes. The durabilities of the QPE membranes were evaluated under severe, accelerated-aging conditions, and minor degradation was recognized by (1)H NMR spectra. The QPE membrane retained high conductivity in hot water at 80 °C for 5000 h. A noble metal-free direct hydrazine fuel cell was operated with the QPE membrane at 80 °C. The maximum power density, 297 mW/cm(2), was achieved at a current density of 826 mA/cm(2). PMID:21657275

  5. Migration of BADGE (bisphenol A diglycidyl-ether) and BFDGE (bisphenol F diglycidyl-ether) in canned seafood.

    PubMed

    Cabado, Ana G; Aldea, Susana; Porro, Corina; Ojea, Gonzalo; Lago, Jorge; Sobrado, Cristina; Vieites, Juan M

    2008-05-01

    Migration of potentially toxic materials used for the lining of commercial can goods remains an important issue, especially with respect to certain types of processed foods. Seafood is one type where more information is needed with respect to other ingredients used for adding value to fishery products. Most cans are internally coated with starters of resins such as bisphenol A diglycidyl-ether (BADGE) and bisphenol F diglycidyl-ether (BFDGE), both considered as toxic compounds. Several seafood products, sardines, tuna fish, mackerel, mussels, cod and mackerel eggs, were manufactured in different conditions changing covering sauce, time and temperature of storage and heat-treated for sterilization in cans. Migration kinetics of BADGE and BFDGE from varnish into canned products were evaluated by HPLC in 70 samples after 6, 12 or 18 months of storage. Results showed that there is no migration of BADGE in tuna fish, sardines, mussels or cod. However, migration of BFDGE occurs in all species, in a storage time-dependent way and content of fat, although migration of these compounds is not affected by sterilization conditions. All samples analyzed presented values lower than 9 mg BADGE/kg net product without exceeding European limits. However, concerning BFDGE migration, European legislation does not allow the use and/or the presence of BFDGE. Main migration takes place in mackerel reaching the highest values, 0.74 mg BFDGE/kg and 0.34 mg BADGE/kg net product, in red pepper sauce. PMID:18289761

  6. Proton-exchange membrane materials based on blends of poly(ether ketone ketone) and poly(ether imide)

    NASA Astrophysics Data System (ADS)

    Swier, S.; Gasa, J.; Shaw, M. T.; Weiss, R. A.

    2004-03-01

    The development of materials for proton-exchange membranes (PEM) involves finding a compromise between high proton conductivities and sufficient mechanical and chemical stability to withstand the conditions in the fuel cell. The currently used perfluorinated polymer electrolyte membranes tend to be expensive and have problems in case of extensive application. New polymer electrolytes based on hydrocarbon polymers are therefore the focus of a considerable research effort. Blends of sulfonated poly(ether ketone ketone) (SPEKK) and poly(ether imide) (PEI) were evaluated as PEMs. Sulfonation of PEKK was achieved by using a mixture of concentrated sulfuric acid and fuming sulfuric acid, and blend membranes were prepared by casting a solution of the two polymers in N-methyl-2- pyrrolidone. The hydration level of the membrane decreased with increasing PEI concentration, but a proton conductivity comparable to NafionTM was obtained for blends containing less than 20 wt% PEI. The fuel cell performance of the membranes was affected by the sulfonation level of the PEKK, the blend composition and the casting procedure employed. The state of water in the membrane was evaluated from the depression of the glass transition and from the melting endotherms associated with water. Proton conductivity depended strongly on the hydration number (water molecules per sulfonate group), which depended on the sulfonation level of the PEKK and the blend morphology. Sorption data from gravimetric techniques provided important transport information like the solubility and diffusivity of water and methanol.

  7. Sulfonated poly(ether ether ketone)/mesoporous silica hybrid membrane for high performance vanadium redox flow battery

    NASA Astrophysics Data System (ADS)

    Li, Zhaohua; Dai, Wenjing; Yu, Lihong; Xi, Jingyu; Qiu, Xinping; Chen, Liquan

    2014-07-01

    Hybrid membranes of sulfonated poly(ether ether ketone) (SPEEK) and mesoporous silica SBA-15 are prepared with various mass ratios for vanadium redox flow battery (VRB) application and investigated in detail. The hybrid membranes are dense and homogeneous with no visible hole as the SEM and EDX images shown. With the increasing of SBA-15 mass ratio, the physicochemical property, VO2+ permeability, mechanical property and thermal stability of hybrid membranes exhibit good trends, which can be attributed to the interaction between SPEEK and SBA-15. The hybrid membrane with 20 wt.% SBA-15 (termed as S/SBA-15 20) shows the VRB single cell performance of CE 96.3% and EE 88.1% at 60 mA cm-2 due to its good balance of proton conductivity and VO2+ permeability, while Nafion 117 membrane shows the cell performance of CE 92.2% and EE 81.0%. Besides, the S/SBA-15 20 membrane shows stable cell performance of highly stable efficiency and slower discharge capacity decline during 120 cycles at 60 mA cm-2. Therefore, the SPEEK/SBA-15 hybrid membranes with optimized mass ratio and excellent VRB performance can be achieved, exhibiting good potential usage in VRB systems.

  8. Composite proton exchange membranes based on phosphosilicate sol and sulfonated poly(ether ether ketone) for fuel cell applications

    NASA Astrophysics Data System (ADS)

    Xie, Qiang; Li, Yifan; Chen, Xiaojing; Hu, Jing; Li, Lu; Li, Haibin

    2015-05-01

    The phosphosilicate sol/sulfonated poly(ether ether ketone) (SPEEK) composite membranes are fabricated by using a simple mechanical mixing process. The performance of the composite membranes is investigated, including their morphology, thermal and mechanical properties, water adsorption and swelling ratio, proton conductivity and fuel cell performance. The composite membranes obtain the advantages of both components while avert their disadvantages, showing excellent comprehensive performance. The utilization of SPEEK endows the composite membranes with good mechanical properties even if the proportion of inorganic components in the membranes is as high as 40 wt.%. The incorporation of phosphosilicate sol not only enhances the dimensional and thermal stability of the composite membranes, but also improves their conductivity significantly. A maximum of proton conductivity of 0.138 S cm-1, higher than that of Nafion 212 membrane (0.124 S cm-1), is obtained from the composite membrane 6SPEEK/4(P-Si) under the conditions of 70 °C and 95% relative humidity, owing to its enhanced hygroscopicity and functional groups. Besides, a single fuel cell equipped with the composite membrane 7SPEEK/3(P-Si) releases a peak power density of 449.9 mW cm-2 at 60 °C, higher than that of cells equipped with SPEEK and Nafion 212 membrane measured under the same conditions.

  9. Novel composite proton-exchange membrane based on proton-conductive glass powders and sulfonated poly (ether ether ketone)

    NASA Astrophysics Data System (ADS)

    Di, Zhigang; Xie, Qiang; Li, Haibin; Mao, Dali; Li, Ming; Zhou, Daowu; Li, Lu

    2015-01-01

    The SiO2-Nafion/sulfonated poly (ether ether ketone) (SPEEK) composite membranes are fabricated by using the simple mechanical ball-milling process to combine SiO2 glass powders with small portion of Nafion, in which SiO2 glass powders are prepared by modified sol-gel progress and Nafion is embedded in situ into a highly porous silica network. The morphology, thermal and mechanical properties, pore structure, proton conductivity and fuel cell performance of the SiO2-Nafion/SPEEK composite membranes are investigated. The poor miscibility of Nafion and sulfonated aromatic polymer is solved by fixing Nafion into SiO2 glass powders. The composite membranes perform well even if the proportion of inorganic component in membranes is as high as 40 wt.%. A maximum of proton conductivity, 0.018 S cm-1, is obtained from the membrane of 4(8Si-2N)/6SPEEK at 80 °C and 90% relative humidity, which is owing to its enhanced hygroscopicity and highly dispersed Nafion clusters. In addition, a single fuel cell equipped with the composite membrane shows a peak power density of 589.2 mW cm-2 at 70 °C.

  10. Computational Approach to Diarylprolinol-Silyl Ethers in Aminocatalysis.

    PubMed

    Halskov, Kim Søholm; Donslund, Bjarke S; Paz, Bruno Matos; Jørgensen, Karl Anker

    2016-05-17

    Asymmetric organocatalysis has witnessed a remarkable development since its "re-birth" in the beginning of the millenium. In this rapidly growing field, computational investigations have proven to be an important contribution for the elucidation of mechanisms and rationalizations of the stereochemical outcomes of many of the reaction concepts developed. The improved understanding of mechanistic details has facilitated the further advancement of the field. The diarylprolinol-silyl ethers have since their introduction been one of the most applied catalysts in asymmetric aminocatalysis due to their robustness and generality. Although aminocatalytic methods at first glance appear to follow relatively simple mechanistic principles, more comprehensive computational studies have shown that this notion in some cases is deceiving and that more complex pathways might be operating. In this Account, the application of density functional theory (DFT) and other computational methods on systems catalyzed by the diarylprolinol-silyl ethers is described. It will be illustrated how computational investigations have shed light on the structure and reactivity of important intermediates in aminocatalysis, such as enamines and iminium ions formed from aldehydes and α,β-unsaturated aldehydes, respectively. Enamine and iminium ion catalysis can be classified as HOMO-raising and LUMO-lowering activation modes. In these systems, the exclusive reactivity through one of the possible intermediates is often a requisite for achieving high stereoselectivity; therefore, the appreciation of subtle energy differences has been vital for the efficient development of new stereoselective reactions. The diarylprolinol-silyl ethers have also allowed for novel activation modes for unsaturated aldehydes, which have opened up avenues for the development of new remote functionalization reactions of poly-unsaturated carbonyl compounds via di-, tri-, and tetraenamine intermediates and vinylogous iminium ions

  11. Iptycene-derived crown ether hosts for molecular recognition and self-assembly.

    PubMed

    Han, Ying; Meng, Zheng; Ma, Ying-Xian; Chen, Chuan-Feng

    2014-07-15

    CONSPECTUS: Synthetic macrocyclic hosts have played key roles in the development of host-guest chemistry. Crown ethers are a class of macrocyclic molecules with unique flexible structures. They have served as the first generation of synthetic hosts, and researchers have extensively studied them in molecular recognition. However, the flexible structures of simple crown ethers and their relatively limited modes of complexation with guests have limited the further applications of these molecules. In recent years, researchers have moved toward fabricating interlocking molecules, supramolecular polymers, and other assemblies with specific structures and properties. Therefore, researchers have developed more complex crown ether-based macrocyclic hosts with multicavity structures and multicomplexation modes that provide more diverse and sophisticated host-guest systems. In this Account, we summarize our research on the synthesis and characterization of iptycene-derived crown ether hosts, their use as host molecules, and their applications in self-assembled complexes. Iptycenes including triptycenes and pentiptycenes are a class of aromatic compounds with unique rigid three-dimensional structures. As a result, they are promising building blocks for the synthesis of novel macrocyclic hosts and the construction of novel self-assembled complexes with specific structures and properties. During the last several years, we have designed and synthesized a new class of iptycene-derived crown ether hosts including macrotricyclic polyethers, molecular tweezer-like hosts, and tritopic tris(crown ether) hosts, which are all composed of rigid iptycene building blocks linked by flexible crown ether chains. We have examined the complexation behavior of these hosts with different types of organic guest molecules. Unlike with conventional crown ethers, the combination of iptycene moieties and crown ether chains provides the iptycene-derived crown ether hosts with complexation properties

  12. Morphological changes in semicrystalline poly(ether ether ketone) and poly(ethylene terephthalate) during heating and structures of blends with poly(ether imide)

    SciTech Connect

    Jonas, A.M.; Russell, T.P.; Yoon, D.Y.

    1995-12-01

    Structural changes occurring during heating of cold crystallized PEEK and PET have been studied by real-time x-ray scattering using synchrotron radiation. Rapid melting/recrystallization is found when the semicrystalline PEEK and PET samples are heated above the previous highest annealing temperatures, Such melting/recrystallization results in irreversible increases in the lamellar long period, the crystal thickness and the density difference between the crystalline and amorphous regions. Throughout the entire temperature range up to the melting point, the linear crystallinity of lamellar stacks remains nearly constant around 0.3. The fact that both PEEK and PET form miscible blends with poly(ether imide) (PEI) in amorphous melts has been utilized to identify and to investigate the noncrystalline inter-lamellar region in the semicrystalline samples. For the semicrystalline blends of PEEK/PEI, both the small-angle x-ray scattering and dielectric loss measurements show that only a small amount of PEI is mixed in the inter-lamellar region. The majority of PEI, expelled from the lamellar stacks, is totally demixed from PEEK, demonstrating that the inter-lamellar region of semicrystalline PEEK is significantly different from the random amorphous melt. Therefore, the level of linear crystallinity and the miscibility characteristics indicate the presence of thick ordered interfacial layer on the lamellar surface, most likely due to the presence of rigid aromatic groups in PEEK and PET chains.

  13. Tertiary aralkyl urethanes and isocyanates derived therefrom

    SciTech Connect

    Singh, B.; Chang, L.W.; Forgione, P.S.

    1984-03-27

    Production of tertiary aralkyl isocyanates, such as tetramethyl xylylene diisocyanates, by thermal cracking of corresponding urethanes formed by addition of corresponding olefins and carbamic acid esters at moderate temperatures and in the presence of acid catalyst.

  14. Determination of the thermal stability of perfluoropolyalkyl ethers by tensimetry

    NASA Technical Reports Server (NTRS)

    Helmick, Larry A.; Jones, William R., Jr.

    1992-01-01

    The thermal decomposition temperatures of several perfluoropolyalkyl ether fluids were determined with a computerized tensimeter. In general, the decomposition temperatures of the commercial fluids were all similar and significantly higher than those for noncommercial fluids. Correlation of the decomposition temperatures with the molecular structures of the primary components of the commercial fluids revealed that the stability of the fluids was not affected by carbon chain length, branching, or adjacent difluoroformal groups. Instead, stability was limited by the presence of small quantities of thermally unstable material and/or chlorine-containing material arising from the use of chlorine containing solvents during synthesis. Finally, correlation of decomposition temperatures with molecular weights for two fluids supports a chain cleavage reaction mechanism for one and an unzipping reaction mechanism for the other.

  15. Direct and selective hydrogenolysis of arenols and aryl methyl ethers.

    PubMed

    Kusumoto, Shuhei; Nozaki, Kyoko

    2015-01-01

    For valorization of biomass, the conversion of lignin to deoxygenated bulk aromatic compounds is an emerging subject of interest. Because aromatic rings are susceptible to metal-catalysed hydrogenation, the selective hydrogenolysis of carbon-oxygen bonds still remains a great challenge. Herein we report direct and selective hydrogenolysis of sp(2) C-OH bonds in substituted phenols and naphthols catalysed by hydroxycyclopentadienyl iridium complexes. The corresponding arenes were obtained in up to 99% yields, indicating the possible production of arenes from lignin-derived bio-oils. Furthermore, the same catalysts were applied to the unprecedented selective hydrogenolysis of the sp(3) C-O bonds in aryl methyl ethers. Thus, the hydrodeoxygenation of vanillylacetone, a lignin model compound, afforded alkylbenzenes as the major products via triple deoxygenation. PMID:25704229

  16. Solvent polarity effects on carbene/ether-O-ylide equilibria.

    PubMed

    Hoijemberg, Pablo A; Moss, Robert A; Krogh-Jespersen, Karsten

    2012-05-17

    p-Nitrophenylchlorocarbene (PNPCC) reacted reversibly with tetrahydrofuran (THF), tetrahydropyran (THP), 1,3-dioxane (1,3-D), and 1,4-dioxane (1,4-D) to form O-ylides 8, 9, 10, and 11, respectively. The O-ylides were visualized by their characteristic UV-vis spectroscopic signatures. Equilibrium constants (K) were determined spectroscopically, and studies of K as a function of pentane/1,2-dichloroethane (DCE) solvent blends illustrated the dependence of K on solvent polarity. Electronic structure calculations based on density functional theory provided carbene/ether O-ylide structures and energetics, as well as electronic spectroscopic parameters for use in the determination of K. Comparisons of the computed and experimental data were generally satisfactory. PMID:22564048

  17. History of arsenic ethers: who was Felix D'Arcet?

    PubMed

    Petroianu, G A

    2012-11-01

    Williamson serendipitously discovered (1851) a new and efficient way to produce esters using ethyl iodide and potassium salts and in doing so elucidated the molecular mechanism behind ether formation. Lassaigne (1820) made the analogy between sulphovinic and phosphovinic acids and demonstrated the existence of phosphovinic acid, while Pelouze (1833) synthesised monoethyl phosphovinic acid. Finally 1848 Voegeli produced diethyl phosphovinic acid and the first neutral ester of phosphoric acid, the triethyl phosphate (TEP). The successes of Lassaigne and Pelouze in producing phosphovinic acids and Mitscherlich's theory of isomorphism fuelled the search for the vinic acids of arsenic, phosphorus neighbor in the periodic system. This short report attempts to identify the (less known) pharmacists and chemists involved in the quest for both arsenovinic acids and the neutral esters of arsenic and pyroarsenic acids. PMID:23210247

  18. Fibril Formation and Phase Separation in Aqueous Cellulose Ethers

    NASA Astrophysics Data System (ADS)

    Maxwell, Amanda; Schmidt, Peter; McAllister, John; Lott, Joseph; Bates, Frank; Lodge, Timothy

    Aqueous solutions of many cellulose ethers are known to undergo thermoreversible gelation and phase separation upon heating to form turbid hydrogels, but the mechanism and resulting structures have not been well understood. Turbidity, light scattering and small-angle neutron scattering (SANS) are used to show that hydroxypropyl methylcellulose (HPMC) chains are dissolved in water below 50 °C and undergo phase separation at higher temperatures. At 70 °C, at sufficiently high concentrations in water, HPMC orders into fibrillar structures with a well-defined radius of 18 +/- 2 nm, as characterized by cryogenic transmission electron microscopy and SANS. The HPMC fibril structure is independent of concentration and heating rate. However, HPMC fibrils do not form a percolating network as readily as is seen in methylcellulose, resulting in a lower hot-gel modulus, as demonstrated by rheology.

  19. A model survey meter using undoped poly (ether sulfone)

    NASA Astrophysics Data System (ADS)

    Nakamura, Hidehito; Shirakawa, Yoshiyuki; Kanayama, Masaya; Sato, Nobuhiro; Kitamura, Hisashi; Takahashi, Sentaro

    2015-04-01

    The large region surrounding the damaged Fukushima Daiichi Nuclear Power Plant has necessitated the use of numerous radiation survey meters with large, robust substrates. The survey meters require efficient scintillation materials that do not require doping and have dimensional stability, such as poly (ether sulfone) (PES) resins. Here, we demonstrate the performance of a model survey meter that uses large PES plates with polished, mirrored surfaces and rough, scattering surfaces. Light collection efficiencies from plates having one or more of these surfaces were quantitatively Characterised with 36Cl-, 60Co-, 137Cs-radioactive sources. The count rates of plates having a combination of mirrored/scattering-surfaces are >1.6 times that for plates having two mirrored surfaces. In addition, a significant amount of radiation-induced light generated in the PES is trapped inside the plate because of its relatively high refractive index. The results indicate that large, undoped PES plates can be used in radiation survey meters.

  20. Developmental Exposure to Polybrominated Diphenyl Ethers and Neurodevelopment

    PubMed Central

    Mall, Jennifer K.

    2014-01-01

    Exposure to polybrominated diphenyl ethers (PBDE) during sensitive developmental windows can interfere with cognitive function and behavior, which are critical components of neurodevelopment. The association between developmental exposure to PBDEs and neurodevelopment has been extensively studied using animal models. In this review, we focus on the accumulating evidence in humans. Despite methodological, geographical, and temporal differences between studies, the majority of the epidemiologic evidence supports that early life exposure to PBDEs measured during pregnancy and/or during childhood is detrimental to child neurodevelopment in domains related to child behavior, cognition, and motor skills. While the precise mechanism of action of PBDEs on neurodevelopment is unknown, PBDE-induced neurotoxicity via thyroid hormone disruption and direct action of PBDEs on the developing brain have been proposed and tested. Additional studies are suggested to better understand how early life and/or childhood PBDE exposures, including exposure to specific PBDE congeners, impact neurodevelopmental indices. PMID:25530937

  1. Revisiting ether-derivatized imidazolium-based ionic liquids.

    PubMed

    Fei, Zhaofu; Ang, Wee Han; Zhao, Dongbin; Scopelliti, Rosario; Zvereva, Elena E; Katsyuba, Sergey A; Dyson, Paul J

    2007-08-30

    A series of ether-derivatized imidazolium halides have been prepared and characterized. Contrary to literature reports, they are all crystalline solids and have melting points well above room temperature (50-100 degrees C). Single crystals of the imidazolium salts, obtained in situ by slow cooling from their molten state to room temperature, were analyzed by X-ray crystallography, revealing various anion-cation interactions in the solid state. Exchange of the halides with [Tf(2)N]- yielded room temperature ionic liquids with viscosities that are comparable to related 1-alkyl-3-methylimidazolium ionic liquids. Density functional theory combined with IR spectroscopy has been used to analyze the role of functionalization of the imidazolium side chain on the formation of the molecular and supramolecular structure of the compounds and its possible impact on their physical properties. PMID:17676796

  2. Low-temperature radiation copolymerization of tetrafluoroethylene with perfluorovinyl ethers

    SciTech Connect

    Kim, I.P.; Pirozhnaya, L.N.; Loginova, N.N.; Barkalov, I.M.

    1986-12-01

    The copolymerization of perfluorovinyl ethers with tetrafluoroethylene at low temperature was studied and compared with the process conducted with chemical initiation in bulk or aqueous medium. A calorimetric method was used for studying the kinetics of copolymerization, the phase state of the system, and the phase transition dynamics. Ampules containing the samples of monomers and mixtures were irradiated at 77/sup 0/K with /sup 60/Co ..gamma.. rays with a dose rate of 25 kGy/h. Radiolysis in the solid phase at 77/sup 0/K with a 130 kGy dose resulted in the formation of 0.5-1.0 wt.% of a polymer, and this polymer was soluble in the monomer.

  3. Sesamolinol glucoside, disaminyl ether, and other lignans from sesame seeds.

    PubMed

    Grougnet, Raphael; Magiatis, Prokopios; Laborie, Helene; Lazarou, Despina; Papadopoulos, Athanasios; Skaltsounis, Alexios-Leandros

    2012-01-11

    The application of a procedure based on XAD-4 adsorption resin permitted the obtainment of an enriched polyphenolic extract from Sesamum indicum seeds. Chemical analysis of the obtained extract led to the identification of 12 lignans. Among them, 2 lignans, (+)-sesamolinol-4'-O-β-D-glucoside and disaminyl ether, are reported for the first time as natural compounds. Their structure has been determined by spectroscopic methods, mainly by the application of one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) techniques [heteronuclear multiple-quantum coherence (HMQC), heteronuclear multiple-bond correlation (HMBC), and nuclear Overhauser effect spectrometry (NOESY)] and mass spectroscopy. The isolated compounds were evaluated for their antimutagenic activity. Among the tested lignans, the most active lignan was found to be sesamolin, followed by sesamolinol and samin, against H(2)O(2). Additionally, some of the tested lignans showed desmutagenic activity against benzo[a]pyrene (BaP). PMID:22148167

  4. Biodegradation of Ether Pollutants by Pseudonocardia sp. Strain ENV478

    PubMed Central

    Vainberg, Simon; McClay, Kevin; Masuda, Hisako; Root, Duane; Condee, Charles; Zylstra, Gerben J.; Steffan, Robert J.

    2006-01-01

    A bacterium designated Pseudonocardia sp. strain ENV478 was isolated by enrichment culturing on tetrahydrofuran (THF) and was screened to determine its ability to degrade a range of ether pollutants. After growth on THF, strain ENV478 degraded THF (63 mg/h/g total suspended solids [TSS]), 1,4-dioxane (21 mg/h/g TSS), 1,3-dioxolane (19 mg/h/g TSS), bis-2-chloroethylether (BCEE) (12 mg/h/g TSS), and methyl tert-butyl ether (MTBE) (9.1 mg/h/g TSS). Although the highest rates of 1,4-dioxane degradation occurred after growth on THF, strain ENV478 also degraded 1,4-dioxane after growth on sucrose, lactate, yeast extract, 2-propanol, and propane, indicating that there was some level of constitutive degradative activity. The BCEE degradation rates were about threefold higher after growth on propane (32 mg/h/g TSS) than after growth on THF, and MTBE degradation resulted in accumulation of tert-butyl alcohol. Degradation of 1,4-dioxane resulted in accumulation of 2-hydroxyethoxyacetic acid (2HEAA). Despite its inability to grow on 1,4-dioxane, strain ENV478 degraded this compound for >80 days in aquifer microcosms. Our results suggest that the inability of strain ENV478 and possibly other THF-degrading bacteria to grow on 1,4-dioxane is related to their inability to efficiently metabolize the 1,4-dioxane degradation product 2HEAA but that strain ENV478 may nonetheless be useful as a biocatalyst for remediating 1,4-dioxane-contaminated aquifers. PMID:16885268

  5. Impaired neurotransmission in ether lipid-deficient nerve terminals

    PubMed Central

    Brodde, Alexander; Teigler, Andre; Brugger, Britta; Lehmann, Wolf D.; Wieland, Felix; Berger, Johannes; Just, Wilhelm W.

    2016-01-01

    Isolated defects of ether lipid (EL) biosynthesis in humans cause rhizomelic chondrodysplasia punctata type 2 and type 3, serious peroxisomal disorders. Using a previously described mouse model [Rodemer, C., Thai, T.P., Brugger, B., Kaercher, T., Werner, H., Nave, K.A., Wieland, F., Gorgas, K., and Just, W.W. (2003) Inactivation of ether lipid biosynthesis causes male infertility, defects in eye development and optic nerve hypoplasia in mice. Hum. Mol. Genet., 12, 1881–1895], we investigated the effect of EL deficiency in isolated murine nerve terminals (synaptosomes) on the pre-synaptic release of the neurotransmitters (NTs) glutamate and acetylcholine. Both Ca2+-dependent exocytosis and Ca2+-independent efflux of the transmitters were affected. EL-deficient synaptosomes respire at a reduced rate and exhibit a lowered adenosin-5′-triphosphate/adenosine diphosphate (ATP/ADP) ratio. Consequently, ATP-driven processes, such as synaptic vesicle cycling and maintenance of Na+, K+ and Ca2+ homeostasis, might be disturbed. Analyzing reactive oxygen species in EL-deficient neural and non-neural tissues revealed that plasmalogens (PLs), the most abundant EL species in mammalian central nervous system, considerably contribute to the generation of the lipid peroxidation product malondialdehyde. Although EL-deficient tissue contains less lipid peroxidation products, fibroblasts lacking ELs are more susceptible to induced oxidative stress. In summary, these results suggest that due to the reduced energy state of EL-deficient tissue, the Ca2+-independent efflux of NTs increases while the Ca2+-dependent release declines. Furthermore, lack of PLs is mainly compensated for by an increase in the concentration of phosphatidylethanolamine and results in a significantly lowered level of lipid peroxidation products in the brain cortex and cerebellum. PMID:22403185

  6. Polybrominated diphenyl ethers: occurrence, dietary exposure, and toxicology.

    PubMed Central

    Darnerud, P O; Eriksen, G S; Jóhannesson, T; Larsen, P B; Viluksela, M

    2001-01-01

    Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in plastics (concentration, 5--30%) and in textile coatings. Commercial products consist predominantly of penta-, octa-, and decabromodiphenyl ether mixtures, and global PBDE production is about 40,000 tons per year. PBDEs are bioaccumulated and biomagnified in the environment, and comparatively high levels are often found in aquatic biotopes from different parts of the world. During the mid-1970--1980s there was a substantial increase in the PBDE levels with time in both sediments and aquatic biota, whereas the latest Swedish data (pike and guillemot egg) may indicate that levels are at steady state or are decreasing. However, exponentially increasing PBDE levels have been observed in mother's milk during 1972--1997. Based on levels in food from 1999, the dietary intake of PBDE in Sweden has been estimated to be 0.05 microg per day. Characteristic end points of animal toxicity are hepatotoxicity, embryotoxicity, and thyroid effects as well as maternal toxicity during gestation. Recently, behavioral effects have been observed in mice on administration of PBDEs during a critical period after birth. Based on the critical effects reported in available studies, we consider the lowest-observed-adverse-effect level (LOAEL) value of the PBDE group to be 1 mg/kg/day (primarily based on effects of pentaBDEs). In conclusion, with the scientific knowledge of today and based on Nordic intake data, the possible consumer health risk from PBDEs appears limited, as a factor of over 10(6) separates the estimated present mean dietary intake from the suggested LOAEL value. However, the presence of many and important data gaps, including those in carcinogenicity, reproduction, and developmental toxicity, as well as additional routes of exposure, make this conclusion only preliminary. Moreover, the time trend of PBDEs in human breast milk is alarming for the future. PMID:11250805

  7. The influence of water mixtures on the dermal absorption of glycol ethers

    SciTech Connect

    Traynor, Matthew J.; Wilkinson, Simon C.; Williams, Faith M. . E-mail: F.M.Williams@ncl.ac.uk

    2007-01-15

    Glycol ethers are solvents widely used alone and as mixtures in industrial and household products. Some glycol ethers have been shown to have a range of toxic effects in humans following absorption and metabolism to their aldehyde and acid metabolites. This study assessed the influence of water mixtures on the dermal absorption of butoxyethanol and ethoxyethanol in vitro through human skin. Butoxyethanol penetrated human skin up to sixfold more rapidly from aqueous solution (50%, 450 mg/ml) than from the neat solvent. Similarly penetration of ethoxyethanol was increased threefold in the presence of water (50%, 697 mg/ml). There was a corresponding increase in apparent permeability coefficient as the glycol ether concentration in water decreased. The maximum penetration rate of water also increased in the presence of both glycol ethers. Absorption through a synthetic membrane obeyed Fick's Law and absorption through rat skin showed a similar profile to human skin but with a lesser effect. The mechanisms for this phenomenon involves disruption of the stratum corneum lipid bilayer by desiccation by neat glycol ether micelles, hydration with water mixtures and the physicochemical properties of the glycol ether-water mixtures. Full elucidation of the profile of absorption of glycol ethers from mixtures is required for risk assessment of dermal exposure. This work supports the view that risk assessments for dermal contact scenarios should ideally be based on absorption data obtained for the relevant formulation or mixture and exposure scenario and that absorption derived from permeability coefficients may be inappropriate for water-miscible solvents.

  8. Alternariol 9-methyl ether from the endophytic fungus Alternaria sp. Samif01 and its bioactivities.

    PubMed

    Lou, Jingfeng; Yu, Ruiting; Wang, Xiaohan; Mao, Ziling; Fu, Linyun; Liu, Yang; Zhou, Ligang

    2016-01-01

    One bioactive compound, identified as alternariol 9-methyl ether, was isolated from the crude extract of the endophytic fungus Alternaria sp. Samif01 residing in the roots of Salvia miltiorrhiza Bunge. Alternariol 9-methyl ether was active against bacteria with minimum inhibitory concentration values ranging from 25 to 75μg/mL and median inhibitory concentration (IC50) values ranging from 16.00 to 38.27μg/mL. The IC50 value of alternariol 9-methyl ether against spore germination of Magnaporthe oryzae was 87.18μg/mL. Alternariol 9-methyl ether also showed antinematodal activity against Bursaphelenchus xylophilus and Caenorhabditis elegans with IC50 values of 98.17μg/mL and 74.62μg/mL, respectively. This work is the first report on alternariol 9-methyl ether and its biological activities from the endophytic fungus Alternaria sp. Samif01 derived from S. miltiorrhiza Bunge. The results indicate the potential of Alternaria sp. Samif01 as a source of alternariol 9-methyl ether and also support that alternariol 9-methyl ether is a natural compound with high potential bioactivity against microorganisms. PMID:26887231

  9. Alternariol 9-methyl ether from the endophytic fungus Alternaria sp. Samif01 and its bioactivities

    PubMed Central

    Lou, Jingfeng; Yu, Ruiting; Wang, Xiaohan; Mao, Ziling; Fu, Linyun; Liu, Yang; Zhou, Ligang

    2016-01-01

    One bioactive compound, identified as alternariol 9-methyl ether, was isolated from the crude extract of the endophytic fungus Alternaria sp. Samif01 residing in the roots of Salvia miltiorrhiza Bunge. Alternariol 9-methyl ether was active against bacteria with minimum inhibitory concentration values ranging from 25 to 75 μg/mL and median inhibitory concentration (IC50) values ranging from 16.00 to 38.27 μg/mL. The IC50 value of alternariol 9-methyl ether against spore germination of Magnaporthe oryzae was 87.18 μg/mL. Alternariol 9-methyl ether also showed antinematodal activity against Bursaphelenchus xylophilus and Caenorhabditis elegans with IC50 values of 98.17 μg/mL and 74.62 μg/mL, respectively. This work is the first report on alternariol 9-methyl ether and its biological activities from the endophytic fungus Alternaria sp. Samif01 derived from S. miltiorrhiza Bunge. The results indicate the potential of Alternaria sp. Samif01 as a source of alternariol 9-methyl ether and also support that alternariol 9-methyl ether is a natural compound with high potential bioactivity against microorganisms. PMID:26887231

  10. Discrimination against diacylglycerol ethers in lipase-catalysed ethanolysis of shark liver oil.

    PubMed

    Fernández, Óscar; Vázquez, Luis; Reglero, Guillermo; Torres, Carlos F

    2013-01-15

    Lipase-catalysed ethanolysis of squalene-free shark liver oil was investigated. The mentioned shark liver oil was comprised mainly of diacylglycerol ether and triacylglycerols. In order to test discrimination against diacylglycerol ether, up to 10 different lipases were compared. The ratio of oil to ethanol and lipase stability were also evaluated. Surprisingly, lipase from Pseudomonas stutzeri was the fastest biocatalyst among all assayed, although poor discrimination against diacylglycerol ether was observed. The best results in terms of selectivity and stability were obtained with immobilised lipase from Candida antarctica (Novozym 435). Ethanolysis reaction after 24h in the presence of Novozym 435 produced total disappearance of triacylglycerol and a final reaction mixture comprised mainly of diacylglycerol ethers (10.6%), monoacylglycerol ethers (32.9%) and fatty acid ethyl esters (46.0%). In addition, when an excess of ethanol was used, diacylglycerol ethers completely disappeared after 15 h, giving a final product mainly composed of monoacylglycerol ethers (36.6%) and fatty acid ethyl esters (46.4%). PMID:23122085

  11. Radiolabeled cholesteryl ethers trace LDL cholesteryl esters but not HDL cholesteryl esters in the rat.

    PubMed

    Terpstra, A H

    1995-01-01

    The intravascular metabolism of cholesteryl [1-14C]oleoyl ester and [1,2-3H(N)]cholesteryl palmityl ether was compared in the rat, an animal species without plasma cholesteryl ester transfer activity (CETA). The tracers had identical plasma disappearance rates when they were incorporated into human or rat low density lipoproteins (LDL). Fractional catabolic rates (FCR) were 0.081 +/- 0.014 h-1 and 0.080 +/- 0.013 h-1 for human LDL ester and ether and 0.098 +/- 0.007 h-1 and 0.101 +/- 0.007 h-1 for rat LDL ester and ether, respectively. In contrast, the ether had plasma disappearance rates that were 24%-25% lower than the ester when they were incorporated into human or rat high density lipoproteins (HDL). FCR were 0.230 +/- 0.020 and 0.173 +/- 0.030 h-1 for human HDL ester and ether and 0.131 +/- 0.020 h-1 and 0.100 +/- 0.017 h-1 for rat HDL ester and ether respectively. Biological screening of the rat HDL preparations did not affect these differences. The results of these studies indicate that in the absence of plasma CETA, cholesteryl ethers can be used to trace LDL cholesteryl esters but not to trace HDL cholesteryl esters. PMID:7772060

  12. Synthesis and Cytotoxicity of Silicon and Germanium Containing Pyridine Oxime O-Ethers

    PubMed Central

    Abele, Edgars; Abele, Ramona; Arsenyan, Pavel; Shestakova, Irina; Kanepe, Iveta; Antonenko, Inga; Popelis, Juris; Lukevics, Edmunds

    2003-01-01

    Silicon and germanium containing pyridine aldoxime, ketoxime and amidoxime O-ethers have been prepared using phase transfer catalytic systems oxime alkyl halide solid KOH 18-crown-6 benzene and oxime alkyl halide solid K2CO3 or Cs2CO3 18-crown-6 toluene. Cytotoxic activity of silicon and germanium containing pyridine oxime O-ethers was tested in vitro on two monolayer tumor cell lines: MG- 22A (mouse hepatoma) and HT-1080 (human fibrosarcoma). O-[3-Yriethylsilylpropyl]- and O-[3-(1-methyl- 1-silacyclopentyl)propyl] oximes of pyridine aldehydes and ketones exhibit high cytotoxicity. Presence of methyl group in the pyridine ring considerably decreased activity of amidoxime O-ethers. Oxime ethers containing two elements are essentially inactive. For 2-acetylpyridine oxime ethers the activity increases in order of alkyl substituents: Et3GeCH2CH2SiMe2CH2 < Et3SiCH2CH2CH2 < (CH2)4SiCH2CH2CH2. Cytotoxicity of ketoxime O-ethers is considerably lower in comparison with aldoxime O-ethers. PMID:18365061

  13. Silyl ether-coupled poly(epsilon-caprolactone)s with stepwise hydrolytic degradation profiles.

    PubMed

    Wang, M; Zhang, Q; Wooley, K L

    2001-01-01

    Silyl ether-coupled poly(epsilon-caprolactone)s (PCLs) with stepwise degradation profiles were synthesized via the cross-dehydrocoupling polymerizations between 1,4-bis(dimethylsilyl)benzene (BDSB) and telechelic, diol-terminated PCL macromonomers. With the presence of 10 wt % palladium on activated carbon as the catalyst, the condensations between BDSB and diol-terminated PCL macromonomers having molecular weights of 1200, 2010, and 5500 g/mol were performed in toluene at 100 degrees C under argon. Hydrogen was eliminated as the condensate upon the formation of silyl ether bonds linking the PCL blocks, yielding within 24 h, silyl ether-coupled PCLs of molecular mass 7590, 29,900, and 29,500 g/mol, respectively. The characterization of each polymer included (1)H NMR, (13)C NMR, and (29)Si NMR spectroscopies, size exclusion chromatography (SEC), and differential scanning calorimetry. The hydrolytic degradation properties of the polymers in solution were studied, and the molecular weight reductions over time were monitored by SEC. The silyl ether linkages of the polymers underwent hydrolysis in the presence of mineral acids, whereas the PCL segments released from the cleavage of the labile silyl ether coupling unit did not undergo detectable molecular weight reduction over 15 days. In the presence of acetic acid, the silyl ether functionalities were cleaved with a half-life of 3 days; however, the PCL chain required reaction with trifluoroacetic acid to give a number-average molecular weight loss half-life of 4 days. The silyl ether-coupled PCLs underwent degradation in a gradient fashion, therefore, by a protocol that involved the addition of acetic acid for cleavage of the silyl ether functionalities, followed by further addition of trifluoroacetic acid to bring the hydrolysis of the silyl ether functionalities to completion and to trigger the degradation of PCL segments. PMID:11777394

  14. Evaluation of thermal gelation behavior of different cellulose ether polymers by rheology

    NASA Astrophysics Data System (ADS)

    Balaghi, S.; Edelby, Y.; Senge, B.

    2014-05-01

    Hydroxypropylmethylcellulose (HPMC) and Methylcellulose (MC) are cellulose ethers which can be dispersed in water and used as thickeners, emulsifiers, binders, film formers, and water-retention agents due to their hydrophilic and hydrophobic characteristics. In this study, various types of HPMCs, in comparison with two types of MCs were examined. The formed gels of the different cellulose ethers showed specific and various structural formation and network properties. The degree of methylation (Meth.) and hydroxypropylation (HyPr.) affected drastically the heat-induced gelation of the examined cellulose ethers.

  15. New aromatic activated dihalides and bisphenol monomers for the preparation of novel poly(arylene ethers)

    NASA Technical Reports Server (NTRS)

    Wolfe, James F.

    1993-01-01

    The goal of this research program was to synthesize a series of unique monomers of type I to be utilized at NASA-Langley in the preparation of new poly(arylene ether ketones), poly(arylene ether ketosulfones), and poly(arylene ether ketophosphine oxides). These A-A and A-B monomer systems, which possess activated aryl halide and/or phenolic end groups, are accessible via condensation reactions of appropriately substituted aryl acetonitrile carbanions with activated aryl dihalides followed by oxidative decyanation.

  16. CONVERSION OF DIMETHYL ETHER-BORON TRIFLUORIDE COMPLEX TO POTASSIUM FLUOBORATE

    DOEpatents

    Eberle, A.R.

    1957-06-18

    A method of preparing KBF/sub 4/ from the dimethyl ether complex of BF/sub 3/ is given. This may be accomplished by introducing the dimethyl ether complex of BF/sub 3/ into an aqueous solution of KF and alcohol, expelling the ether liberated from the complex by heating or stirring and recovering the KBF/sub 4/ so formed. The KBF/sub 4/ is then filtered from the alcohol-water solution, which may be recycled, to reduce the loss of KBF/sub 4/ which is not recovered by filtration.

  17. Conversion of dimethyl ether--boron trifluoride complex to potassium fluoborate

    DOEpatents

    Eberle, A.R.

    1957-06-18

    A method of preparing KBF/sub 4/ from the dimethyl ether complex of BF/sub 3/ is given. This may be accomplished by introducing the dimethyl ether complex of BF/sub 3/ into an aqueous solution of KF and alcohol, expelling the ether liberated from the complex by heating or stirring and recovering the KBF/sub 4/ so formed. The KBF/sub 4/ is then filtered from the alcohol-water solution, which may be recycled, to reduce the loss of KBF/sub 4/ which is not recovered by filtration.

  18. Reaction of a bituminous coal with the potassium-crown ether reagent

    SciTech Connect

    Huang, S.; Wood, K.; Narayan, R.

    1986-09-01

    In this paper, the authors report on the reaction of a bituminous coal with a powerful yet selective site-specific reagent, namely, potassium-crown ether operating at room temperature and atmospheric pressure. The potassium-crown ether reagent can generate a stable solution of electrons at room temperature and atmospheric pressure. The small size of the electron and its high reactivity permits it to diffuse into the macromolecular coal network and transfer onto the aromatic substrates in the coal. This results in the formation of aromatic radical anions or dianions which undergo cleavage reactions at ether and diaryl alkane linkages.

  19. Dual Behavior of Iodine Species in Condensation of Anilines and Vinyl Ethers Affording 2-Methylquinolines.

    PubMed

    Le, Song Thi; Yasuoka, Chisa; Asahara, Haruyasu; Nishiwaki, Nagatoshi

    2016-01-01

    A metal-free, mild and efficient method for the synthesis of 2-methylquinolines was successfully developed by condensation of anilines with vinyl ethers in the presence of catalytic amount of iodine. Modification of both pyridine and benzene moieties was easily achieved by changing only the vinyl ether and aniline. In this reaction, the iodine species was revealed to show dual behavior; molecular iodine serves as an oxidant, while its reduced form, hydrogen iodide, activates the vinyl ether. The redox reaction between these iodine species enables the use of a catalytic amount of iodine in this synthetic method. PMID:27347919

  20. Metal-organic frameworks constructed from crown ether-based 1,4-benzenedicarboxylic acid derivatives.

    PubMed

    Chen, Teng-Hao; Schneemann, Andreas; Fischer, Roland A; Cohen, Seth M

    2016-02-21

    A series of unprecedented crown ether- and thiacrown ether-derivatized benzene dicarboxylic acid (H2bdc) ligands has been synthesized and incorporated into the prototypical isoreticular metal-organic framework (IRMOF) and UiO-66 materials. In the case of UiO-66, only MOFs comprised from a mixed-ligand composition, requiring both unsubstituted bdc and crown ether containing ligands, could be prepared. These are among the few ligand derivatives, and resulting MOFs, that incorporate a macrocyclic group directly on the bdc ligand, providing a new, modular platform for exploring new supramolecular and coordination chemistry within MOFs. PMID:26765588

  1. Experimental investigation on the soil sorption properties and hydrophobicity of polymethoxylated, polyhydroxylated diphenyl ethers and methoxylated-, hydroxylated-polychlorinated diphenyl ethers.

    PubMed

    Zhang, Xuesheng; Zeng, Xiaolan; Qin, Li; Qu, Ruijuan; Shi, Jiaqi; Wei, Zhongbo; Yang, Shaogui; Wang, Zunyao

    2015-09-01

    In the present study, twenty-six types of polymethoxylated diphenyl ethers (PMeODEs), twenty types of polyhydroxylated diphenyl ethers (PHODEs), seven types of methoxylated-polychlorinated diphenyl ethers (MeO-PCDEs) and seven types of hydroxylated-polychlorinated diphenyl ethers (HO-PCDEs) were synthesized. The logKow and logKoc values of all of the synthesized compounds were then determined using HPLC. The soil sorption properties of five types of selected substituted diphenyl ethers (DEs) were investigated. Sorption behavior studies suggested that rapid sorption played a primary role in the sorption process of the selected DEs and their sorption isotherms were fitted the Freundlich logarithmic model. For PMeODEs and PHODEs, with the increase in the number of substituents, both logKow and logKoc values exhibited linearly decreasing trends. Unlike PMeODEs and PHODEs, both logKow and logKoc values of MeO/HO-PCDEs were decreased linearly with the increasing number of chlorine atoms. The reason maybe that both methoxy and hydroxyl are hydrophilic groups, whereas the chlorine atom is hydrophobic group. Linear relationships were observed for the logKow and logKoc of all studied DEs. Moreover, the logKow of PMeODEs, PHODEs, MeO- and HO-PCDEs and their corresponding PCDEs showed good linearity. PMID:25917505

  2. The effects on the rat testis of single inhalation exposures to ethylene glycol monoalkyl ethers, in particular ethylene glycol monomethyl ether.

    PubMed

    Samuels, D M; Doe, J E; Tinston, D J

    1984-01-01

    The effects of a single inhalation exposure to the rat of the saturated vapours derived from four ethylene glycol monoalkyl ethers have been investigated. No effects on the testis were observed following exposure to ethylene glycol isopropyl ether (EG ISOPE) and ethylene glycol butyl ether (EGBE), but there were marked reductions in testicular weight 14 days after exposure to ethylene glycol monomethyl ether (EGME) and ethylene glycol monoethyl ether (EGEE). Further studies were designed to establish the effect of a single exposure to EGME. Mature male albino rats were exposed to various levels of EGME vapour for a single 4-h period and killed 14 days later. Following this single exposure a dose-related decrease in testis weight was observed in rats exposed to 5,000, 2,500 or 1,250 ppm EGME. Histopathological examination revealed disordered spermatogenesis and tubular atrophy in these animals. Minimal degenerative changes were seen in the testis of rats exposed to 625 ppm EGME. When rats were examined at various time intervals after exposure to EGME vapour for 4 h, testis weight was reduced in rats examined 2 days after exposure to 2,500 and 1,000 ppm EGME and remained depressed when compared with control values for up to 19 days following exposure. Histopathological examination of the testis revealed disordered spermatogenesis in exposed animals evident at 1 day following exposure to either 2,500 or 1,00 ppm EGME. PMID:6595980

  3. Development of nanocomposites reinforced with carboxylated poly(ether ether ketone) grafted to zinc oxide with superior antibacterial properties.

    PubMed

    Díez-Pascual, Ana M; Díez-Vicente, Angel L

    2014-03-12

    Novel poly(ether ether ketone) (PEEK) based nanocomposites have been fabricated via melt-blending by addition of a carboxylated polymer derivative covalently grafted onto the surface of hydroxyl-terminated ZnO nanoparticles. Their morphology, thermal, mechanical, tribological, and antibacterial properties have been analyzed and compared with those of composites reinforced with pristine ZnO. The Fourier transform infrared (FT-IR) spectra corroborate the success of the grafting reaction, showing the appearance of signals related to ester linkages. Microscopic observations demonstrate that the polymer grafting improves the nanoparticle dispersion within the matrix. A progressive rise in thermal stability and flame retardant ability is found with increasing ZnO concentration, with an exceptional increment in the maximum degradation rate temperature of 70 °C at 5.0 wt % loading. The crystallization and melting temperature of PEEK decrease upon incorporation of the grafted nanofillers, attributed to the restrictions on polymer chain mobility and crystal growth imposed by the strong ZnO-matrix interactions. Nanocomposites with polymer-grafted nanoparticles exhibit higher stiffness, strength, ductility, toughness and glass transition temperature whilst lower coefficient of friction and wear rate than the neat polymer and composites with bare ZnO. Further, they show superior antibacterial activity against both the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus bacteria. The antimicrobial effect increases upon raising nanoparticle content, and is stronger on E. coli. The approach used in this work is a simple, scalable, and efficient method to improve the performance of PEEK/ZnO nanocomposites for use in biomedical applications such as trauma, orthopedics, and spinal implants. PMID:24552261

  4. Anti-infective and osteointegration properties of silicon nitride, poly(ether ether ketone), and titanium implants.

    PubMed

    Webster, T J; Patel, A A; Rahaman, M N; Sonny Bal, B

    2012-12-01

    Silicon nitride (Si(3)N(4)) is an industrial ceramic used in spinal fusion and maxillofacial reconstruction. Maximizing bone formation and minimizing bacterial infection are desirable attributes in orthopedic implants designed to adhere to living bone. This study has compared these attributes of Si(3)N(4) implants with implants made from two other orthopedic biomaterials, i.e. poly(ether ether ketone) (PEEK) and titanium (Ti). Dense implants made of Si(3)N(4), PEEK, or Ti were surgically implanted into matching rat calvarial defects. Bacterial infection was induced with an injection of 1×10(4)Staphylococcus epidermidis. Control animals received saline only. On 3, 7, and 14days, and 3months post-surgery four rats per time period and material were killed, and calvariae were examined to quantify new bone formation and the presence or absence of bacteria. Quantitative evaluation of osteointegration to adjacent bone was done by measuring the resistance to implant push-out (n=8 rats each for Ti and PEEK, and n=16 rats for Si(3)N(4)). Three months after surgery in the absence of bacterial injection new bone formation around Si(3)N(4) was ∼69%, compared with 24% and 36% for PEEK and Ti, respectively. In the presence of bacteria new bone formation for Si(3)N(4), Ti, and PEEK was 41%, 26%, and 21%, respectively. Live bacteria were identified around PEEK (88%) and Ti (21%) implants, whereas none were present adjacent to Si(3)N(4). Push-out strength testing demonstrated statistically superior bone growth onto Si(3)N(4) compared with Ti and PEEK. Si(3)N(4) bioceramic implants demonstrated superior new bone formation and resistance to bacterial infection compared with Ti and PEEK. PMID:22863905

  5. Sulfonated poly(ether ether ketone)/clay-SO 3H hybrid proton exchange membranes for direct methanol fuel cells

    NASA Astrophysics Data System (ADS)

    Fu, Tiezhu; Cui, Zhiming; Zhong, Shuangling; Shi, Yuhua; Zhao, Chengji; Zhang, Gang; Shao, Ke; Na, Hui; Xing, Wei

    A new type of sulfonated clay (clay-SO 3H) was prepared by the ion exchange method with the sulfanilic acid as the surfactant agent. The grafted amount of sulfanilic acid in clay-SO 3H was 51.8 mequiv. (100 g) -1, which was measured by thermogravimetric analysis (TGA). Sulfonated poly(ether ether ketone) (SPEEK)/clay-SO 3H hybrid membranes which composed of SPEEK and different weight contents of clay-SO 3H, were prepared by a solution casting and evaporation method. For comparison, the SPEEK/clay hybrid membranes were produced with the same method. The performances of hybrid membranes for direct methanol fuel cells (DMFCs) in terms of mechanical and thermal properties, water uptake, water retention, methanol permeability and proton conductivity were investigated. The mechanical and thermal properties of the SPEEK membranes had been improved by introduction of clay and clay-SO 3H, obviously. The water desorption coefficients of the SPEEK and hybrid membranes were studied at 80 °C. The results showed that the addition of the inorganic part into SPEEK membrane enhanced the water retention of the membrane. Both methanol permeability and proton conductivity of the hybrid membranes decreased in comparison to the pristine SPEEK membrane. However, it was worth noting that higher selectivity defined as ratio of proton conductivity to methanol permeability of the SPEEK/clay-SO 3H-1 hybrid membrane with 1 wt.% clay-SO 3H was obtained than that of the pristine SPEEK membrane. These results showed that the SPEEK/clay-SO 3H hybrid membrane with 1 wt.% clay-SO 3H had potential usage of a proton exchange membrane (PEM) for DMFCs.

  6. Chemistry and properties of poly(arylene ether 1,3,4-oxadiazole)s and poly(arylene ether 1,2,4-triazole)s

    NASA Technical Reports Server (NTRS)

    Connell, J. W.; Hergenrother, P. M.; Wolf, P.

    1992-01-01

    Poly(arylene ether)s containing l,3,4-oxadiazole and 1,2,4-triazole units were prepared by the aromatic nucleophilic displacement reaction of bisphenol oxadiazole and bisphenol triazole compounds with activated aromatic dihalides. The polymers exhibited glass transition temperatures (Tg) ranging from 182 to 242 C, and several polymers exhibited melting transitions (Tm) ranging from 265 to 390 C. Inherent viscosities ranged from 1.02 to 3.40 dl/g, indicating relatively high molecular weights. Thin films exhibited tensile strengths, moduli, and elongations at 23 C of 90-110 MPa, 2.7-3.6 GPa, and 4-7 percent, respectively. Titanium-to-titanium tensile shear specimens of a poly(arylene ether 1,3,4-oxadiazole) exhibited tensile shear strengths at 23 and 150 C of 22.1 and 17.9 MPa, respectively.

  7. Synthesis and biological evaluation of arctigenin ester and ether derivatives as activators of AMPK.

    PubMed

    Shen, Sida; Zhuang, Jingjing; Chen, Yijia; Lei, Min; Chen, Jing; Shen, Xu; Hu, Lihong

    2013-07-01

    A series of new arctigenin and 9-deoxy-arctigenin derivatives bearing different ester and ether side chains at the phenolic hydroxyl positions are designed, synthesized, and evaluated for activating AMPK potency in L6 myoblasts. Initial biological evaluation indicates that some alkyl ester and phenethyl ether arctigenin derivatives display potential activities in AMPK phosphorylation improvement. Further structure-activity relationship analysis shows that arctigenin ester derivatives 3a, 3h and 9-deoxy-arctigenin phenethyl ether derivatives 6a, 6c, 6d activate AMPK more potently than arctigenin. Moreover, the 2-(3,4-dimethoxyphenyl)ethyl ether moiety of 6c has been demonstrated as a potential functional group to improve the effect of AMPK phosphorylation. The structural optimization of arctigenin leads to the identification of 6c as a promising lead compound that exhibits excellent activity in AMPK activation. PMID:23673223

  8. Comparison of surface modification of poly(ether urethanes) on physical properties and blood compatibility

    SciTech Connect

    Wrobleski, D.A.; Cash, D.L.; Hermes, R.E.

    1988-01-01

    Because of their good elastomeric properties including the ability to undergo repeated flexing without failure, polyurethanes are used in a number of biomedical applications including flexing diaphragms or coatings on surfaces in artificial hearts and heart assist devices. In particular, the poly(ether urethanes), are preferred for use in biomedical applications because of their greater hydrolytic stability as compared to poly(ester urethanes). However, poly(ether urethanes), as other polymeric materials in contact with blood, cause formation of thrombus and bacterial infections. These problems might be overcome by incorporation of antithrombogenic substances and/or antibacterial agents in the surface of the polymer. We have explored both of these methods by examining the infusion of polyvinylpyrrolidone (PVP) and poly(ethylene glycol) (PEG) into commercially available poly(ether urethanes) and the graft polymerization of N-vinyl pyrrolidone onto poly(ether urethanes). Preliminary results are presented here. 7 refs., 1 fig.

  9. Elton Romeo Smilie, the not-quite discoverer of ether anesthesia.

    PubMed

    Stone, Martha E; Meyer, Marlene R; Alston, Theodore A

    2010-01-01

    Like William T.G. Morton, Elton Romeo Smilie (1819-1889) was raised in Massachusetts, attended medical school in New England, practiced dentistry there, strove for clinical invention, and moved to Boston. In October 1846, both announced that inhaled ethereal preparations achieved reversible insensibility in surgical patients. Smilie published a report in the Boston Med Surg J 3 wk before Bigelow used that forum to broadcast Morton's Ether Day. Smilie's preparation was an ethereal tincture of opium, and, as he mistakenly believed the opium to be volatile and important, he ceded priority to Morton for ether anesthesia. The two authors collaborated on chloroform, but Smilie soon headed off in the Gold Rush to California. It is tempting to speculate that Charles T. Jackson and Morton were indebted in part to Smilie. PMID:19713261

  10. Degradation of the Alternaria mycotoxins alternariol, alternariol monomethyl ether, and altenuene upon bread baking.

    PubMed

    Siegel, David; Feist, Michael; Proske, Matthias; Koch, Matthias; Nehls, Irene

    2010-09-01

    The stability of the Alternaria mycotoxins alternariol, alternariol monomethyl ether, and altenuene upon bread baking was investigated by model experiments using a spiked wholemeal wheat flour matrix. For alternariol and alternariol monomethyl ether, but not for altenuene, degradation products, formed through a sequence of hydrolysis and decarboxylation, could be identified in pilot studies. The simultaneous quantification of alternariol, alternariol monomethyl ether, altenuene, and the degradation products was achieved by a newly developed high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) multimethod. The obtained quantitative data indicate that the Alternaria mycotoxins are barely degraded during wet baking, while significant degradation occurs upon dry baking, with the stability decreasing in the order alternariol monomethyl ether>alternariol>altenuene. The novel degradation products could be detected after the wet baking of flour spiked with alternariol and in a sample survey of 24 commercial cereal based baking products. PMID:20687560

  11. A versatile pathway to end-functionalized cellulose ethers for click chemistry applications.

    PubMed

    Kamitakahara, Hiroshi; Suhara, Ryo; Yamagami, Mao; Kawano, Haruko; Okanishi, Ryoko; Asahi, Tomoyuki; Takano, Toshiyuki

    2016-10-20

    This paper describes a versatile pathway to heterobifunctional/telechelic cellulose ethers, such as tri-O-methyl cellulosyl azide and propargyl tri-O-methyl celluloside, having one free C-4 hydroxyl group attached to the glucosyl residue at the non-reducing end for the use in Huisgen 1,3-dipolar cycloaddition and copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC). The one-step end-functionalization of cellulose ethers for molecular rod synthesis involves the introduction of two reactive groups at both ends of the cellulose molecule, and can afford linear triblock copolymers via CuAAC and further reactions. We were able to tailor the degree of polymerization of end-functionalized cellulose ethers with controlled amounts of a Lewis acid, namely SnCl4. Chemical structures of the above cellulose ethers and the reaction conditions for controlling molecular length are discussed. PMID:27474546

  12. Rate Constants for the Reactions of Hydroxyl Radical with Several Alkanes, Cycloalkanes, and Dimethyl Ether

    NASA Technical Reports Server (NTRS)

    DeMore, W.; Bayes, K.

    1998-01-01

    Relative rate experiements were used to measure rate constants and temperature denpendencies of the reactions of OH with propane, n-butane, n-pentane, n-hexane, cyclopropane, cyclobutane, cyclopentane, and dimethyl ether.

  13. DEVELOPMENTAL EXPOSURE TO POLYBROMINATED DIPHENYL ETHERS DOES NOT ALTER SYNAPTIC TRANSMISSION AND LTP IN HIPPOCAMPUS.

    EPA Science Inventory

    Polybrominated diphenyl ether (PDE) flame retardants bioaccumulate in the environment, in wildlife, and in humans. Concern has been raised over potential thyrotoxic effects of this class of xenobiotics. Severe hypothyroidism during critical periods of brain development leads to...

  14. Iridium-Catalyzed Branch-Selective Hydroarylation of Vinyl Ethers via C-H Bond Activation.

    PubMed

    Ebe, Yusuke; Nishimura, Takahiro

    2015-05-13

    Iridium-catalyzed hydroarylation of vinyl ethers via a directed C-H bond activation of aromatic compounds gave high yields of the corresponding addition products with high branch selectivity. PMID:25928127

  15. THERMODYNAMIC EVALUATION OF FLUORINATED ETHERS, ETHANES, AND PROPANES AS ALTERNATIVE REFRIGERANTS

    EPA Science Inventory

    The visuals, part of a thermodynamic evaluation of fluorinated ethers, ethanes, and propanes as alternative refrigerants, are a useful tool in comparing new chemicals to existing refrigerants in vapor compression cycles. hey present the required suction superheat and the performa...

  16. POLIBROMINATED DIPHENYL ETHERS: A CASE STUDY FOR APPLICATION OF BIOMONITORING DATA TO CHARACTERIZE EXPOSURE

    EPA Science Inventory

    The presence and steady increase in environmental and human concentrations of PBDEs (polybrominated diphenyl ethers) has heightened interest in the potential toxicological consequences of these chemicals. Currently available data on exposure, pharmacokinetics, toxicity, and biom...

  17. Investigation of Reagent Gases for the Positive Chemical Ionization of Select Polybrominated Diphenyl Ethers

    EPA Science Inventory

    Polybrominated diphenyl ethers (PBDEs) fall into the class of compounds known as brominated flame retardants and their incorporation in a multitude of products is responsible for saving numerous lives. However, toxicology studies have alerted researchers to the potential adverse...

  18. Thermal and oxidative degradation studies of formulated C-ethers by gel-permeation chromatography

    NASA Technical Reports Server (NTRS)

    Jones, W. R., Jr.; Morales, W.

    1982-01-01

    Gel-permeation chromatography was used to analyze C-ether lubricant formulations from high-temperature bearing tests and from micro-oxidation tests. Three mu-styragel columns (one 500 and two 100 A) and a tetrahydrofuran mobile phase were found to adequately separate the C-ether degradation products. The micro-oxidation tests yielded degradation results qualitatively similar to those observed from the bearing tests. Micro-oxidation tests conducted in air yielded more degradation than did tests in nitrogen. No great differences were observed between the thermal-oxidative stabilities of the two C-ether formulations or between the catalytic degradation activities of silver and M-50 steel. C-ether formulation I did yield more degradation than did formulation II in 111- and 25-hour bearing tests, respectively.

  19. IRIS Toxicological Review of Ethylene Glycol Mono-Butyl Ether (Egbe) (External Review Draft)

    EPA Science Inventory

    EPA has conducted a peer review of the scientific basis supporting the human health hazard and dose-response assessment of ethylene glycol monobutyl ether that will appear on the Integrated Risk Information System (IRIS) database.

  20. INFLUENCE OF METHYL TERT-BUTYL ETHER (MTBE) ON LAKE WATER ALGAE: JOURNAL ARTICLE

    EPA Science Inventory

    NRMRL-ADA-01209 Kampbell*, D.H., An, Y, and Williams, VR. Influence of Methyl tert-Butyl Ether (MTBE) on Lake Water Algae. Bulletin of Environmental Contamination and Toxicology 57 (4):675-681 (2001). ...

  1. Stable isotope dilution assays of alternariol and alternariol monomethyl ether in beverages.

    PubMed

    Asam, Stefan; Konitzer, Katharina; Schieberle, Peter; Rychlik, Michael

    2009-06-24

    Stable isotope dilution assays (SIDAs) for the determination of the most important mycotoxins of the black mold Alternaria, namely, alternariol and alternariol monomethyl ether, have been developed. For this purpose, deuterated alternariol and alternariol methyl ether were synthesized by palladium catalyzed protium-deuterium exchange from the unlabeled toxins. Reaction conditions were chosen in such a manner that the formation of the [(2)H(4)]-isotopologues was favored. The synthesized products were characterized by LC-MS, NMR, and UV-spectroscopy. On the basis of the use of [(2)H(4)]-alternariol and [(2)H(4)]-alternariol methyl ether as internal standards, SIDAs were developed and applied to the determination of alternariol and alternariol methyl ether in beverages using LC-MS/MS. Method validation revealed a high sensitivity, i.e., low limits of detection (alternariol, 0.03 microg/kg; alternariol methyl ether, 0.01 microg/kg) and limits of quantitation (alternariol, 0.09 microg/kg; alternariol methyl ether, 0.03 microg/kg), respectively. Recovery from spiked apple juice was 100.5 +/- 3.4% for alternariol (range 0.1-1 microg/kg) and 107.3 +/- 1.6% for alternariol methyl ether (range 0.05-0.5 microg/kg). Interassay precision (expressed as coefficient of variation, CEV) for alternariol was 4.0% (7.82 +/- 0.31 microg/kg; vegetable juice, naturally contaminated) and 4.6% (1.04 +/- 0.05 microg/kg; grape juice, naturally contaminated). For alternariol methyl ether, a CEV of 2.3% (0.79 +/- 0.02 microg/kg; vegetable juice, naturally contaminated) was obtained. Analysis of fruit juices showed low contamination with alternariol and alternariol methyl ether in general, but higher values of both toxins were found in wine and vegetable juices. The values for alternariol were higher than those for alternariol methyl ether in nearly any case. However, the developed SIDA has proven to be optimally suited for further studies on alternariol and alternariol methyl ether content in

  2. Contact angle measurements of a polyphenyl ether to 190 C on M-50 steel

    NASA Technical Reports Server (NTRS)

    Jones, W. R., Jr.

    1981-01-01

    Contact angle measurements were performed for a polyphenyl ether on steel in nitrogen. A tilting plate and a sessile drop apparatus were used. Surface tension was measured with a maximum bubble pressure apparatus. Critical surface energies of spreading were found to be 30.1 and 31.3 dynes/cm. It was concluded that the polyphenyl ether is inherently autophobic and will not spread on its own surface film.

  3. William TG Morton's early ether inhalers: a tale of three inhalers and their inscriptions.

    PubMed

    Haridas, R P

    2009-07-01

    Three ether inhalers with inscriptions stating that they had been used in early ether anaesthesia were found. All three inhalers were initially linked to WTG Morton. Two of the inhalers were probably among several types of inhalers used by Morton. The third inhaler was found to have been incorrectly attributed to Morton. It was first used by John Foster Brewster Flagg, a dentist in Philadelphia. PMID:19705631

  4. Photochemical dimerization and functionalization of alkanes, ethers, primary alcohols and silanes

    DOEpatents

    Crabtree, Robert H.; Brown, Stephen H.

    1988-01-01

    The space-time yield and/or the selectivity of the photochemical dimerization of alkanes, ethers, primary alcohols and tertiary silanes with Hg and U.V. light is enhanced by refluxing the substrate in the irradiated reaction zone at a temperature at which the dimer product condenses and remains condensed promptly upon its formation. Cross-dimerization of the alkanes, ethers and silanes with primary alcohols is disclosed, as is the functionalization to aldehydes of the alkanes with carbon monoxide.

  5. Photochemical dimerization and functionalization of alkanes, ethers, primary alcohols and silanes

    DOEpatents

    Crabtree, R.H.; Brown, S.H.

    1988-02-16

    The space-time yield and/or the selectivity of the photochemical dimerization of alkanes, ethers, primary alcohols and tertiary silanes with Hg and U.V. light is enhanced by refluxing the substrate in the irradiated reaction zone at a temperature at which the dimer product condenses and remains condensed promptly upon its formation. Cross-dimerization of the alkanes, ethers and silanes with primary alcohols is disclosed, as is the functionalization to aldehydes of the alkanes with carbon monoxide.

  6. Metal ion complexation by ionizable crown ethers. Final report, January 1, 1988--June 30, 1994

    SciTech Connect

    Bartsch, R.A.

    1994-12-31

    During the report period a variety of new lipophilic ionizable crown ethers with pendent proton-ionizable groups has been synthesized. The ligands possess one or more ionizable group (carboxylic acid, phosphonic acid monoethyl ester, para-nitrophenol, phosphonic acid) attached to crown ether, monoazacrown ether or diazacrown ether frameworks. These novel chelating agents have either pendent or inward-facing proton-ionizable groups. Such lipophilic proton-ionizable crown ethers are designed for use in multiphase metal ion separations (solvent extraction, liquid membrane transport). In addition a series of proton-ionizable crown ethers without lipophilic groups was prepared to study how structural variations within the ligand influence metal ion complexation in homogeneous media as assessed by NMR spectroscopy or titration calorimetry. A third class of new metal ion-complexing agents is a series of lipophilic acyclic polyether dicarboxylic acids. Competitive solvent extractions of alkali metal and alkaline earth cations and of the mixed species have been conducted to reveal the influence of ring size, nature and attachment site of the lipophilic group, sidearm length, and proton-ionizable group identity and location upon the selectivity and efficiency of metal ion complexation. In addition to such studies of structural variation within the lipophilic proton-ionizable crown ether, the effect of changing the organic solvent and variation of the stripping conditions have been assessed. The influence of structural variations within lipophilic acyclic polyether dicarboxylic acids upon competitive solvent extraction of alkaline earth cations has been probed. Also a new chromogenic, di-ionizable crown ether with extremely high selectivity for Hg{sup 2+} has been discovered.

  7. The Ether Lipid Precursor Hexadecylglycerol Causes Major Changes in the Lipidome of HEp-2 Cells

    PubMed Central

    Bergan, Jonas; Skotland, Tore; Sylvänne, Tuulia; Simolin, Helena; Ekroos, Kim; Sandvig, Kirsten

    2013-01-01

    The ether-lipid precursor sn-1-O-hexadecylglycerol (HG) can be used to compensate for early metabolic defects in ether-lipid biosynthesis. To investigate a possible metabolic link between ether-linked phospholipids and the rest of the cellular lipidome, we incubated HEp-2 cells with HG. Mass spectrometry analysis revealed major changes in the lipidome of HG-treated cells compared to that of untreated cells or cells treated with palmitin, a control substance for HG containing an acyl group instead of the ether group. We present quantitative data for a total of 154 species from 17 lipid classes. These species are those constituting more than 2% of their lipid class for most lipid classes, but more than 1% for the ether lipids and glycosphingolipids. In addition to the expected ability of HG to increase the levels of ether-linked glycerophospholipids with 16 carbon atoms in the sn-1 position, this precursor also decreased the amounts of glycosphingolipids and increased the amounts of ceramide, phosphatidylinositol and lysophosphatidylinositol. However, incubation with palmitin, the fatty acyl analogue of HG, also increased the amounts of ceramide and phosphatidylinositols. Thus, changes in these lipid classes were not ether lipid-dependent. No major effects were observed for the other lipid classes, and cellular functions such as growth and endocytosis were unaffected. The data presented clearly demonstrate the importance of performing detailed quantitative lipidomic studies to reveal how the metabolism of ether-linked glycerophospholipids is coupled to that of glycosphingolipids and ester-linked glycerophospholipids, especially phosphatidylinositols. PMID:24098742

  8. Liquid-crystal photoalignment by photosensitive fluorinated poly(arylene ether)

    SciTech Connect

    Li Xiangdan; Zhong Zhenxin; Lee, Seung Hee; Ghang, Gilson; Lee, Myong-Hoon

    2005-03-28

    We report a liquid-crystal (LC) photoalignment material with a high photosensitivity based on the fluorinated poly(arylene ether) containing a chalcone unit in the main chain. The fluorinated poly(arylene ether) exhibited defect-free homogeneous alignment of LCs upon irradiation of linearly polarized UV light for 10 s. Spectroscopic analyses revealed that [2+2] cycloaddition between the chalcone moieties generated the surface anisotropy to induce an efficient alignment of LCs.

  9. Pyrolysis Pathways of the Furanic Ether 2-Methoxyfuran.

    PubMed

    Urness, Kimberly N; Guan, Qi; Troy, Tyler P; Ahmed, Musahid; Daily, John W; Ellison, G Barney; Simmie, John M

    2015-10-01

    Substituted furans, including furanic ethers, derived from nonedible biomass have been proposed as second-generation biofuels. In order to use these molecules as fuels, it is important to understand how they break apart thermally. In this work, a series of experiments were conducted to study the unimolecular and low-pressure bimolecular decomposition mechanisms of the smallest furanic ether, 2-methoxyfuran. Electronic structure (CBS-QB3) calculations indicate this substituted furan has an unusually weak O-CH3 bond, approximately 190 kJ mol(-1) (45 kcal mol(-1)); thus, the primary decomposition pathway is through bond scission resulting in CH3 and 2-furanyloxy (O-C4H3O) radicals. Final products from the ring opening of the furanyloxy radical include 2 CO, HC≡CH, and H. The decomposition of methoxyfuran is studied over a range of concentrations (0.0025-0.1%) in helium or argon in a heated silicon carbide (SiC) microtubular flow reactor (0.66-1 mm i.d., 2.5-3.5 cm long) with reactor wall temperatures from 300 to 1300 K. Inlet pressures to the reactor are 150-1500 Torr, and the gas mixture emerges as a skimmed molecular beam at a pressure of approximately 10 μTorr. Products formed at early pyrolysis times (100 μs) are detected by 118.2 nm (10.487 eV) photoionization mass spectrometry (PIMS), tunable synchrotron VUV PIMS, and matrix infrared absorption spectroscopy. Secondary products resulting from H or CH3 addition to the parent and reaction with 2-furanyloxy were also observed and include CH2═CH-CHO, CH3-CH═CH-CHO, CH3-CO-CH═CH2, and furanones; under the conditions in the reactor, we estimate these reactions contribute to at most 1-3% of total methoxyfuran decomposition. This work also includes observation and characterization of an allylic lactone radical, 2-furanyloxy (O-C4H3O), with the assignment of several intense vibrational bands in an Ar matrix, an estimate of the ionization threshold, and photoionization efficiency. A pressure-dependent kinetic

  10. Wholly Aromatic Ether-Imides as n-Type Semiconductors

    NASA Technical Reports Server (NTRS)

    Weiser, Erik; St. Clair, Terry L.; Dingemans, Theo J.; Samulski, Edward T.; Irene, Gene

    2006-01-01

    Some wholly aromatic ether-imides consisting of rod-shaped, relatively-low-mass molecules that can form liquid crystals have been investigated for potential utility as electron-donor-type (ntype) organic semiconductors. It is envisioned that after further research to improve understanding of their physical and chemical properties, compounds of this type would be used to make thin film semiconductor devices (e.g., photovoltaic cells and field-effect transistors) on flexible electronic-circuit substrates. This investigation was inspired by several prior developments: Poly(ether-imides) [PEIs] are a class of engineering plastics that have been used extensively in the form of films in a variety of electronic applications, including insulating layers, circuit boards, and low-permittivity coatings. Wholly aromatic PEIs containing naphthalene and perylene moieties have been shown to be useful as electrochromic polymers. More recently, low-molecular-weight imides comprising naphthalene-based molecules with terminal fluorinated tails were shown to be useful as n-type organic semiconductors in such devices as field-effect transistors and Schottky diodes. Poly(etherimide)s as structural resins have been extensively investigated at NASA Langley Research Center for over 30 years. More recently, the need for multi-functional materials has become increasingly important. This n-type semiconductor illustrates the scope of current work towards new families of PEIs that not only can be used as structural resins for carbon-fiber reinforced composites, but also can function as sensors. Such a multi-functional material would permit so-called in-situ health monitoring of composite structures during service. The work presented here demonstrates that parts of the PEI backbone can be used as an n-type semiconductor with such materials being sensitive to damage, temperature, stress, and pressure. In the near future, multi-functional or "smart" composite structures are envisioned to be able

  11. Searching for trans ethyl methyl ether in Orion KL⋆

    NASA Astrophysics Data System (ADS)

    Tercero, B.; Cernicharo, J.; López, A.; Brouillet, N.; Kolesniková, L.; Motiyenko, R. A.; Margulès, L.; Alonso, J. L.; Guillemin, J.-C.

    2015-10-01

    We report on the tentative detection of trans ethyl methyl ether (tEME), t-CH3CH2OCH3, through the identification of a large number of rotational lines from each one of the spin states of the molecule towards Orion KL. We also search for gauche-trans-n-propanol, Gt-n-CH3CH2CH2OH, an isomer of tEME in the same source. We have identified lines of both species in the IRAM 30 m line survey and in the ALMA Science Verification data. We have obtained ALMA maps to establish the spatial distribution of these species. Whereas tEME mainly arises from the compact ridge component of Orion, Gt-n-propanol appears at the emission peak of ethanol (south hot core). The derived column densities of these species at the location of their emission peaks are ≤(4.0 ± 0.8) × 1015 cm-2 and ≤(1.0 ± 0.2) × 1015 cm-2 for tEME and Gt-n-propanol, respectively. The rotational temperature is ~100 K for both molecules. We also provide maps of CH3OCOH, CH3CH2OCOH, CH3OCH3, CH3OH, and CH3CH2OH to compare the distribution of these organic saturated O-bearing species containing methyl and ethyl groups in this region. Abundance ratios of related species and upper limits to the abundances of non-detected ethers are provided. We derive an abundance ratio N(CH3OCH3)/N(tEME) ≥ 150 in the compact ridge of Orion. This paper makes use of the following ALMA data: ADS/JAO.ALMA#2011.0.00009.SV. ALMA is a partnership of ESO (representing its member states), NSF (USA), and NINS (Japan) with NRC (Canada), NSC, and ASIAA (Taiwan), and KASI (Republic of Korea), in cooperation with the Republic of Chile. The Joint ALMA Observatory is operated by ESO, AUI/NRAO, and NAOJ. This work was also based on observations carried out with the IRAM 30-m telescope. IRAM is supported by INSU/CNRS (France), MPG (Germany), and IGN (Spain).Appendix A is available in electronic form at http://www.aanda.org

  12. Radium separation through complexation by aqueous crown ethers and ion exchange or solvent extraction

    SciTech Connect

    Chiarizia, R.; Dietz, M.L.; Horwitz, E.P.; Burnett, W.C.

    1997-11-01

    The effect of three water-soluble, unsubstituted crown ethers (15-crown-5 (15C5), 18-crown-6 (18C6) and 21-crown-7 (21C7)) on the uptake of Ca, Sr, Ba and Ra cations by a sulfonic acid cation exchange resin, and on the extraction of the same cations by xylene solutions of dinonylnaphthalenesulfonic acid (HDNNS) from aqueous hydrochloric acid solutions has been investigated. The crown ethers enhance the sorption of the larger cations by the ion exchange resin, thereby improving the resin selectivity over calcium, a result of a synergistic interaction between the crown ether and the ionic functional groups of the resin. Similarly, the extraction of the larger alkaline earth cations into xylene by HDNNS is strongly synergized by the presence of the crown ethers in the aqueous phase. Promising results for intra-Group IIa cation separations have been obtained using each of the three crown ethers as the aqueous ligands and the sulfonic acid cation exchange resin. Even greater separation factors for the radium-calcium couple have been measured with the crown-ethers and HDNNS solutions in the solvent extraction mode. The application of the uptake and extraction results to the development of radium separation schemes is discussed and a possible flowchart for the determination of {sup 226}Ra/{sup 228}Ra in natural waters is presented.

  13. Modification of sodium and potassium channel gating kinetics by ether and halothane

    SciTech Connect

    Bean, B.P.; Shrager, P.; Goldstein, D.A.

    1981-03-01

    The effects of ether and halothane on the kinetics of sodium and potassium currents were investigated in the crayfish giant axon. Both general anesthetics produced a reversible, dose-dependent speeding up of sodium current inactivation at all membrane potentials, with no change in the rising phase of the currents. Double-pulse inactivation experiments with ether also showed faster inactivation, but the rate of recovery from inactivation at negative potentials was not affected. Ether shifted the midpoint of the steady-state fast inactivation curve in the hyperpolarizing direction and made the curve steeper. The activation of potassium currents was faster with ether present, with no change in the voltage dependence of steady-state potassium currents. Ether and halothane are known to perturb the structure of lipid bilayer membranes; the alterations in sodium and potassium channel gating kinetics are consistent with the hypothesis that the rats of the gating processes of the channels can be affected by the state of the lipids surrounding the channels, but a direct effect of ether and halothane on the protein part of the channels cannot be ruled out.

  14. Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

    DOEpatents

    Smith, Jr., Lawrence A.; Jones, Jr., Edward M.; Hearn, Dennis

    1984-01-01

    Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150.degree. to 250.degree. F. at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C.sub.3 to C.sub.6 and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom.

  15. Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

    DOEpatents

    Smith, L.A. Jr.; Jones, E.M. Jr.; Hearn, D.

    1984-05-08

    Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150 to 250 F at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C[sub 3] to C[sub 6] and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom. 2 figs.

  16. Oxylipins in the spikemoss Selaginella martensii: Detection of divinyl ethers, 12-oxophytodienoic acid and related cyclopentenones.

    PubMed

    Ogorodnikova, Anna V; Mukhitova, Fakhima K; Grechkin, Alexander N

    2015-10-01

    Green tissues of spikemoss Selaginella martensii Spring possessed the complex oxylipins patterns. Major oxylipins were the products of linoleic and α-linolenic acids metabolism via the sequential action of 13-lipoxygenase and divinyl ether synthase (DES) or allene oxide synthase (AOS). AOS products were represented by 12-oxophytodienoic acid (12-oxo-PDA) isomers. Exceptionally, S. martensii possesses high level of 12-oxo-9(13),15-PDA, which is very uncommon in flowering plants. Separate divinyl ethers were purified after micro-preparative incubations of linoleic or α-linolenic acids with homogenate of S. martensii aerial parts. The NMR data allowed us to identify all geometric isomers of divinyl ethers. Linoleic acid was converted to divinyl ethers etheroleic acid, (11Z)-etheroleic acid and a minority of (ω5Z)-etheroleic acid. With α-linolenate precursor, the specificity of divinyl ether biosynthesis was distinct. Etherolenic and (ω5Z)-etherolenic acids were the prevailing products while (11Z)-etherolenic acid was a minor one. Divinyl ethers are detected first time in non-flowering land plant. These are the first observations of fatty acid metabolism through the lipoxygenase pathway in spikemosses (Lycopodiophyta). PMID:26277770

  17. Synthesis and Insecticidal Activity of Novel Nitropyridyl-Based Dichloropropene Ethers.

    PubMed

    Liu, Aiping; Yu, Wanqi; Liu, Minhua; Bai, Jianjun; Liu, Weidong; Liu, Xingping; Pei, Hui; Hu, Li; Huang, Mingzhi; Wang, Xiaoguang

    2015-09-01

    Dihalopropene ether insecticides are known for good features such as no cross-resistance to other insecticide classes and safety for mammals. Pyridalyl is the only currently commercialized dichloropropene ether insecticide; however, it contains a trifluoromethyl group, the synthesis of which requires harsh reagents and reaction conditions. To search for novel dihalopropene ethers with unique biological activities but without trifluoromethyl groups, a series of nitropyridyl-based dichloropropene ether analogues were synthesized by reacting nitro-based halopyridine with 2,6-dichloro-4-(3,3-dichloroallyloxy)phenol or 2,6-dichloro-4-(3,3-dichloroallyloxy)phenyl 3-hydroxypropyl ether. Bioassay showed that the compounds exhibited potent insecticidal activities against various lepidopteran pests. Particularly, 2,6-dichloro-4-(3,3-dichloroallyloxy)phenyl 3-(5-nitro-2-pyridyloxy)propyl ether (8e) was active against major agricultural pests, and its insecticidal potency was comparable to that of Pyridalyl. Besides the trifluoromethyl group in Pyridalyl, a nitro group on the 5-position of the pyridyl ring is also viable for the development of optimal insecticidal activity. PMID:26208876

  18. Synthesis and fluorescence properties of divalent europium-poly(methacrylate containing crown ether structure) complexes

    SciTech Connect

    Higashiyama, N.; Nakamura, H.; Mishima, T.; Shiokawa, J.; Adachi, G. )

    1991-02-01

    This paper reports on divalent europium complexes with poly(methacrylate containing crown ether structure)s, poly(crown ether)s, prepared and their fluorescence properties studied. The polymers used were poly(15-crown-5-methyl methacrylate) (PMA15C5), copoly(15- crown-5-methyl methacrylate-X) (copoly(MA15C5-X)); (X = MMA, EMA, BMA, 2-methoxyethyl methacrylate (MAGI) 3,6,9,12,15- pentaoxahexadecyl methacrylate (MAG5)), poly(18-crown-6- methyl methacrylate) (PMA18C6), and copoly(18-crown-6-methyl methacrylate-MMA) (copoly(MA18C6-MMA)), which were obtained by bulk polymerization. The fluorescence properties of Eu{sup 2+} polymers activated by complexing Eu{sup 2+} ions with crown ether groups were measured in powder form. The Eu{sup 2+}-poly (crown ether)s irradiated by UV light generally gave blue bright emission in the region of 420-465 nm. It was Eu{sup 2+}-copoly(Ma15C5-X); (X = MMA, EMA, and MAG1) that showed the largest emission intensity among the Eu{sup 2+} polymers, and its emission intensity was ca. 20% of that for CaWO{sub 4}:Pb (NBS1026) whose quantum efficiency is about 76%. The intensities of emission for the Eu{sup 2+} polymers containing 15-crown-5 were much larger than that for the ones containing 18-crown-6.

  19. Mutagenicity of ethylene glycol ethers and of their metabolites in Salmonella typhimurium his-.

    PubMed

    Hoflack, J C; Lambolez, L; Elias, Z; Vasseur, P

    1995-02-01

    Ethylene glycol ethers, their aldehyde and their acid metabolites were evaluated for their mutagenicity with the Ames test. The Salmonella typhimurium his- tester strains TA 97a, TA 98, TA 100 and TA 102 were used with and without rat S9 mix. Ethylene glycol monomethyl ether, ethylene glycol monoethyl ether, ethylene glycol n-butyl ether and their corresponding aldehyde and acid derivatives were tested up to 10(-4) mol/plate (around 10 mg/plate) or up to cytotoxic concentrations. All tested substances gave negative results with TA 98, TA 100 and TA 102 either with or without S9 mix. In contrast, ethylene glycol n-butyl ether (EGBE) and the aldehyde metabolite of ethylene glycol monomethyl ether, methoxyacetaldehyde (MALD), displayed mutagenic potency in strain TA 97a with and without S9 mix at high concentrations. A significant number of revertants was obtained from 19 mumol/plate EGBE (2.2 mg/plate) and from 34 mumol/plate MALD (2.5 mg/plate). At these concentrations the level of revertants reached up to 7-fold and 3-fold the control values for EGBE and MALD respectively. PMID:7531287

  20. High octane ethers from synthesis gas-derived alcohols. [Methyl isobutyl ether(MIBE) and methyl tertiary butyl ether(MTBE)

    SciTech Connect

    Klier, K.; Herman, R.G.; Johansson, M.A.; Feeley, O.C.

    1993-02-01

    The testing of strongly acidic catalysts for the conversion of a mixture of methanol and isobutanol to ethers and hydrocarbons was continued. Under standardized test conditions the catalysts tested this quarter were: phosphotungstic acid supported on zirconia (PW[sub 12]/ZrO[sub 2]), niobic acid'' (Nb[sub 2]O[sub 5]xH[sub 2]0), and an iron and manganese doped sulfate-modified zirconia (Fe/Mn/ZrO[sub 2]/SO[sub 4][sup [minus]2]). The overall activity of these catalysts followed the order of Fe/Mn/ZrO[sub 2]/SO[sub 4][sup [minus]2] > PW[sub 12]/ZrO[sub 2] > Nb[sub 2]O[sub 5]xH[sub 2]0 with the Fe/Mn/ZrO[sub 2]/SO[sub 4][sup [minus]2] catalyst approaching ZrO[sub 2]/SO[sub 4][sup [minus]2] in both activity and selectivity for isobutene production. The effect of the presence of water on the reaction of methanol and isobutanol over ZrO[sub 2]/SO[sub 4][sup [minus]2] was determined to be insignificant. At 157[degrees]C and a feed of 2/1 molar ratio methanol/isobutanol, the production of isobutene was unaffected by the addition of 0.05and 0.10 parts of water to the 2/1 alcohol feed. Surface areas have been determined for Fe/Mn/ZrO[sub 2]/SO[sub 4][sup [minus]2] niobic acid, and phosphotungstic acid on silica. After calcination, the surface area for Fe/Mn/ZrO[sub 2]/SO[sub 4][sup [minus]2] was found to be 83 M2 /g. Niobic acid and phosphotungstic acid on silica (PW[sub 12]/SiO[sub 2]) were found to have surface areas of 118 and 218 m[sup 2]/g, respectively. [sup 1]H NMR was used to determine if and how much 1-butene was present as a product when isobutanol is dehydrated over sulfate-modified zirconia. It was found to be present in small amounts, [le]3% of the product stream.