Science.gov

Sample records for feasibility study possibilities

  1. Feasibility of future epidemiological studies on possible health effects of mobile phone base stations.

    PubMed

    Neubauer, Georg; Feychting, Maria; Hamnerius, Yngve; Kheifets, Leeka; Kuster, Niels; Ruiz, Ignacio; Schüz, Joachim; Uberbacher, Richard; Wiart, Joe; Röösli, Martin

    2007-04-01

    The increasing deployment of mobile communication base stations led to an increasing demand for epidemiological studies on possible health effects of radio frequency emissions. The methodological challenges of such studies have been critically evaluated by a panel of scientists in the fields of radiofrequency engineering/dosimetry and epidemiology. Strengths and weaknesses of previous studies have been identified. Dosimetric concepts and crucial aspects in exposure assessment were evaluated in terms of epidemiological studies on different types of outcomes. We conclude that in principle base station epidemiological studies are feasible. However, the exposure contributions from all relevant radio frequency sources have to be taken into account. The applied exposure assessment method should be piloted and validated. Short to medium term effects on physiology or health related quality of life are best investigated by cohort studies. For long term effects, groups with a potential for high exposure need to first be identified; for immediate effect, human laboratory studies are the preferred approach. PMID:17080459

  2. Is objective and accurate cognitive assessment across the menstrual cycle possible? A feasibility study

    PubMed Central

    Neill, Jo; Scally, Andy; Tuffnell, Derek; Marshall, Kay

    2015-01-01

    Objectives: Variation in plasma hormone levels influences the neurobiology of brain regions involved in cognition and emotion processing. Fluctuations in hormone levels across the menstrual cycle could therefore alter cognitive performance and wellbeing; reports have provided conflicting results, however. The aim of this study was to assess whether objective assessment of cognitive performance and self-reported wellbeing during the follicular and luteal phases of the menstrual cycle is feasible and investigate the possible reasons for variation in effects previously reported. Methods: The Cambridge Neuropsychological Test Automated Battery and Edinburgh Postnatal Depression Scale were used to assess the cognitive performance and wellbeing of 12 women. Data were analysed by self-reported and hormone-estimated phases of the menstrual cycle. Results: Recruitment to the study and assessment of cognition and wellbeing was without issue. Plasma hormone and peptide estimation showed substantial individual variation and suggests inaccuracy in self-reported menstrual phase estimation. Conclusion: Objective assessment of cognitive performance and self-assessed wellbeing across the menstrual cycle is feasible. Grouping data by hormonal profile rather by self-reported phase estimation may influence phase-mediated results. Future studies should use plasma hormone and peptide profiles to estimate cycle phase and group data for analyses. PMID:26770760

  3. 43 CFR 404.28 - Is it possible to expedite the completion of an appraisal investigation or feasibility study?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Is it possible to expedite the completion of an appraisal investigation or feasibility study? 404.28 Section 404.28 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR RECLAMATION RURAL WATER SUPPLY PROGRAM Overview § 404.28 Is...

  4. 43 CFR 404.28 - Is it possible to expedite the completion of an appraisal investigation or feasibility study?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Is it possible to expedite the completion of an appraisal investigation or feasibility study? 404.28 Section 404.28 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR RECLAMATION RURAL WATER SUPPLY PROGRAM Overview § 404.28 Is...

  5. 43 CFR 404.28 - Is it possible to expedite the completion of an appraisal investigation or feasibility study?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... of an appraisal investigation or feasibility study? 404.28 Section 404.28 Public Lands: Interior... or feasibility study? Yes. If Reclamation determines that a community or groups of communities to be..., to the maximum extent practicable, expedite appraisal investigations and reports and...

  6. 43 CFR 404.28 - Is it possible to expedite the completion of an appraisal investigation or feasibility study?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of an appraisal investigation or feasibility study? 404.28 Section 404.28 Public Lands: Interior... or feasibility study? Yes. If Reclamation determines that a community or groups of communities to be..., to the maximum extent practicable, expedite appraisal investigations and reports and...

  7. 43 CFR 404.28 - Is it possible to expedite the completion of an appraisal investigation or feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... of an appraisal investigation or feasibility study? 404.28 Section 404.28 Public Lands: Interior... or feasibility study? Yes. If Reclamation determines that a community or groups of communities to be..., to the maximum extent practicable, expedite appraisal investigations and reports and...

  8. Earth's rotation and a feasibility study of a possible mexican participation with a VLBI station

    NASA Astrophysics Data System (ADS)

    Saucedo Morales, Julio Cesar; Kokina, Tatiana; Mendoza Araiza, Daniel

    This work begins by presenting a historical introduction on how the change in the Earth's rotation axis was first detected, and on related aspects of the discovery of precession and nutation phenomena. Newton's explanation of precession, the dynamical theory of nutation by Délambert as well as an acount of the first observatories dedicated to these studies are also discussed. In 1899 the International Latitude Service "ILS" was established, defining their main objectives, and started to determine the mean pole (1900 - 1905). In 1961 ILS was substituted by the International Polar Motion Service "IPMS". This service used laser telemetry to the Earth's artificial satelites "SAT", as well as to the Moon. Also in that period, the International Astronomical Union (IAU) aproved the MERIT international program, dedicated to monitor the Earth rotation intercomparing techniques of observation and analysis. It was in this program that "very long base interferometry" VLBI was used for the fist time, obtaining very good results. In 1987 the IAU started the International Earth Rotation Service "IERS" suported by its two networks ICRF and ITRF. The VLBI is said to be a powerful tool that could be used to solve global problems which have an impact in the countries' economies. In México we lack a rigid link in the geodesic network, which is linked to the global positional system NAVSTAR (GPS), as well as to the international system of coordinates (ITRF), and on the other hand there is a very high sysmic activity. We conclude by arguing that México ought to participate in IERS, as it has both scientists and infraestructure, such as the GMT, Sierra la Negra, Puebla, México. To achieve this a companion radiotelescope is needed. For this purpose, 5 telescopes are discussed, showing estimates for simultaneous reception as well as for the precission of the position of these radiotelescopes.

  9. Atmospheric rendezvous feasibility study

    NASA Technical Reports Server (NTRS)

    Schaezler, A. D.

    1972-01-01

    A study was carried out to determine the feasibility of using atmospheric rendezvous to increase the efficiency of space transportation and to determine the most effective implementation. It is concluded that atmospheric rendezvous is feasible and can be utilized in a space transportation system to reduce size of the orbiter vehicle, provide a powered landing with go-around capability for every mission, and achieve lateral range performance that exceeds requirements. A significantly lighter booster and reduced launch fuel requirements are additional benefits that can be realized with a system that includes a large subsonic airplane for recovery of the orbiter. Additional reduction in booster size is possible if the airplane is designed for recovery of the booster by towing. An airplane about the size of the C-5A is required.

  10. Is it possible to use highly realistic virtual reality in the elderly? A feasibility study with image-based rendering

    PubMed Central

    Benoit, Michel; Guerchouche, Rachid; Petit, Pierre-David; Chapoulie, Emmanuelle; Manera, Valeria; Chaurasia, Gaurav; Drettakis, George; Robert, Philippe

    2015-01-01

    Background Virtual reality (VR) opens up a vast number of possibilities in many domains of therapy. The primary objective of the present study was to evaluate the acceptability for elderly subjects of a VR experience using the image-based rendering virtual environment (IBVE) approach and secondly to test the hypothesis that visual cues using VR may enhance the generation of autobiographical memories. Methods Eighteen healthy volunteers (mean age 68.2 years) presenting memory complaints with a Mini-Mental State Examination score higher than 27 and no history of neuropsychiatric disease were included. Participants were asked to perform an autobiographical fluency task in four conditions. The first condition was a baseline grey screen, the second was a photograph of a well-known location in the participant’s home city (FamPhoto), and the last two conditions displayed VR, ie, a familiar image-based virtual environment (FamIBVE) consisting of an image-based representation of a known landmark square in the center of the city of experimentation (Nice) and an unknown image-based virtual environment (UnknoIBVE), which was captured in a public housing neighborhood containing unrecognizable building fronts. After each of the four experimental conditions, participants filled in self-report questionnaires to assess the task acceptability (levels of emotion, motivation, security, fatigue, and familiarity). CyberSickness and Presence questionnaires were also assessed after the two VR conditions. Autobiographical memory was assessed using a verbal fluency task and quality of the recollection was assessed using the “remember/know” procedure. Results All subjects completed the experiment. Sense of security and fatigue were not significantly different between the conditions with and without VR. The FamPhoto condition yielded a higher emotion score than the other conditions (P<0.05). The CyberSickness questionnaire showed that participants did not experience sickness during the

  11. Educational Feasibility Study -- 1966.

    ERIC Educational Resources Information Center

    Hubbard, Ben C., Comp.; And Others

    By virtue of a Title III Elementary and Secondary Education Act grant, the feasibility of consolidating 7 Illinois high schools was studied. Areas of consideration were geographic characteristics, high school and elementary curriculum, and cost considerations relative to high school and elementary school buildings, curriculum, transportation,…

  12. a Preliminary Study of Web-Based Spatial Data Analysis Feasibility - One of Possible Solutions for Disaster Response and Management

    NASA Astrophysics Data System (ADS)

    Lim, C. C.; Chang, K.-C.

    2012-07-01

    As the massive tsunami that struck northeast Japan in 11 March 2011 after a magnitude 9.0 earthquake, it reveals that people are living in a critical environment. Although great improvement has been achieved in disaster prevention technologies, many natural disasters are still unpredictable. In addition to the prevention, rapid and effective responses to such disasters are also crucial. One of the key elements to success is the information dissemination of disaster, including both area and people living within that region. In the past decade, web-based spatial information system has become the major platform for both data sharing and displaying. What is coming next is the development of web-based spatial data analysis. A web-based service allows people to implement spatial analysis immediately as long as the internet connection among database and application servers is available. This useful and helpful spatial information is able to be accessed by all users around the world almost simultaneously. The main goal of this paper is to implement a spatial data analysis module based on service oriented architecture (SOA) concept. The main interest and focus of our study is based on the knowledge regularization processes of spatial data analysis to achieve the automated land cover change detection (LCCD) over internet. The proposed automated model is tested and verified by FORMOSAT-2 imageries taken in 2005 and in 2008. It will be published online for users around the world to maximize the add-on value and minimize the cost of the spatial data, moreover, to reveal the situations of disaster rapidly.

  13. REP Concept Feasibility Study

    NASA Technical Reports Server (NTRS)

    Edwards, Daryl A.; Ensworth, Clinton B. F.; Goodnight, Thomas W.; Sheehe, Charles J.; Wiersma, Stephen C.; Adamsen, Paul B., II; Frank, Larry

    2004-01-01

    Radioisotope Electric Propulsion (REP) may have the potential to provide certain advantages, over conventional chemical propulsion, for outer planetary exploration involving small bodies and long term investigations for medium class missions requiring power comparable to past outer planetary exploration missions. This paper describes a study that investigates the concept s feasibility by performing a preliminary conceptual design of an REP-based spacecraft for a design reference mission. The mission utilizes a spacecraft with a radioisotope power supply less than one kilowatt while operating for a minimum of 10-years. A key element of the REP spacecraft is to ensure sustained science return by orbiting or flying in formation with selected targets. Utilizing current and impending technological advances, this study finds that at a conceptual design level a small body REP orbiter/explorer appears to be feasible for the design reference mission selected for this study.

  14. A MEDLINE feasibility study.

    PubMed Central

    McGee, J L

    1980-01-01

    A MEDLINE feasibility study was conducted with the Northeastern Consortium for Health Information (NECHI) and sponsored by the New England Regional Medical Library Service. It is based on the theory that most potential users and supporters of MEDLINE within hospitals are unaware of its usefulness and applications, and that there exists a need for expanding MEDLINE services to more hospital libraries. The purpose of the study was to provide NECHI with an evaluation of MEDLINE as a feasible service by ascertaining the need and by evaluating the usefulness, satisfaction, and costs of the system. The study demonstrated sufficient use of MEDLINE to justify implementation within NECHI and it provided useful data to determine the future of MEDLINE in each institution. It documented that utilization improved rapidly with publicity and the presence of the system within an institution, that MEDLINE can be an effective and economical complement to the traditional reference services used to support information needs in hospitals, and that more hospital libraries should be able to implement MEDLINE to their advantage once potential users and supporters have been exposed to the system. PMID:6998531

  15. The MRIS feasibility study

    NASA Technical Reports Server (NTRS)

    Neece, Robert T.; Cross, Aubrey E.; Schrader, James H.

    1993-01-01

    The Microwave Reflectometer Ionization Sensor (MRIS) is an instrument being developed for use in detecting and ranging of electron density layers in the reentry plasma of a space transfer vehicle. The rationale for the selection of the Double Sideband Suppressed Carrier (DSBSC) system used in the feasibility study for the MRIS is presented. A 25 GHz single-oscillator system and a 220 GHz double-oscillator system are described. The 25 GHz system was constructed and tested in the laboratory and test results are presented. As developed, the system employs a sideband spacing of 160 MHz. Based on an estimated electromagnetic wave velocity in the plasma, a round-trip phase shift measurement accuracy of +/- 7.6 degrees was required for the desired +/- 1/2 cm distance measurement accuracy. The interaction of parallel ground and reflecting planes produces interference that prevents the basic DSBSC system from meeting the accuracy goal so a frequency modulation was added to the system to allow averaging of the measured phase deviation. With an FM deviation of +/- 1 GHz, laboratory measurements were made for distances from 5 to 61 cm tip free space. Accounting for the plasma velocity factor, 82 percent of the data were equal to or better than the desired accuracy. Based on this measured result a sideband spacing to 250 MHz could be expected to yield data approximately 96 percent within the accuracy goal.

  16. Tribal Utility Feasibility Study

    SciTech Connect

    Engel, R. A.; Zoellick, J. J.

    2007-06-30

    The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

  17. Comet nucleus impact probe feasibility study

    NASA Technical Reports Server (NTRS)

    Castro, A. J.

    1980-01-01

    A top level listing of the comet nucleus impact probe (CNIP) feasibility experiments requirements are presented. A conceptual configuration which shows that the feasibility of engineering the experiment is possible and describes the candidate hardware is discussed. The design studies required in order to design the operating experiment are outlined. An overview of a program plan used to estimate a rough order of magnitude cost for the CNIP experiment is given.

  18. West Valley feasibility study

    SciTech Connect

    Pirro, J.

    1981-01-01

    This report presents the results of a technical assessment of decontamination alternative prepared for the Western New York Nuclear Service Center (WNYNSC). The purpose of the assessment is to determine the recommended method for decontamination of cell surfaces and decontamination and removal of fuel reprocessing cell equipment to permit manual entry into the cells for the installation of waste solidification equipment. The primary cells of interest are the PMC, GPC, and CPC because they offer the largest usable volume for the solidification program. The secondary cells include XC-1, XC-2, XC-3 and the PPC which may be needed to support the solidification program. Five decontamination assessments were evaluated (A-E). The assessments included the estimated cost, occupational exposure, duration, manpower, waste volume generated, and final cell radiation levels achieved with the alternative decontamination methods. The methods varied from thorough destructive decontamination to equipment removal without decontamination followed by cell wall and floor decontamination. The recommended method for the primary cells is to utilize the remote manipulators and cranes to the maximum extent possible to decontaminate equipment and cell surfaces remotely, and to remove the equipment for temporary on-site storage. The recommended method for secondary cell decontamination is to remotely decontaminate the cells to the maximum extent possible prior to manned entry for contact-removal of the fuel reprocessing equipment (Assessment D). Assessment A is expected to cost $8,713,500 in 1980 dollars (including a 25% contingency) and will result in an occupational exposure of 180.3 manRem. Assessment D is expected to cost $11,039,800 and will result in an occupational exposure of 259 manRems.

  19. MIXTURES FEASIBILITY STUDY

    EPA Science Inventory

    A number of studies have been conducted to address questions concerning the toxicity of "real world" mixtures of DBPs. These studies, which used either concentrates of drinking water or humic acid preparations treated with various disinfectants, were largely negative and had a nu...

  20. Wind Farm Feasibility Study

    SciTech Connect

    Richard Curry; Erik Foley; DOE Project Officer - Keith Bennett

    2007-07-11

    Saint Francis University has assessed the Swallow Farm property located in Shade Township, Somerset County, Pennsylvania as a potential wind power development site. Saint Francis worked with McLean Energy Partners to have a 50-meter meteorological tower installed on the property in April 2004 and continues to conduct a meteorological assessment of the site. Results suggest a mean average wind speed at 80 meters of 17 mph with a net capacity factor of 31 - 33%. Approximate electricity generation capacity of the project is 10 megawatts. Also, the University used matching funds provided by the federal government to contract with ABR, Inc. to conduct radar studies of nocturnal migration of birds and bats during the migrations seasons in the Spring and Fall of 2005 with a mean nocturnal flight altitude of 402 meters with less than 5% of targets at altitudes of less than 125 meters. The mean nocturnal passage rate was 166 targets/km/h in the fall and 145 targets/km/h in the spring. Lastly, University faculty and students conducted a nesting bird study May - July 2006. Seventy-three (73) species of birds were observed with 65 determined to be breeding or potentially breeding species; this figure represents approximately 30% of the 214 breeding bird species in Pennsylvania. No officially protected avian species were determined to be nesting at Swallow Farm.

  1. Muon muon collider: Feasibility study

    SciTech Connect

    1996-06-18

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup {minus}2} s{sup {minus}1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice--the authors believe--to allow them to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring which has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design.

  2. Anti-matter propulsion: feasibility, status, and possible enhancement

    SciTech Connect

    Howe, S.D.

    1985-01-01

    The possible use of advanced propulsion techniques must be considered if the currently envisioned launch date of the Manned Mars Mission were to be delayed until 2020 or later. Within the next 30 years, technological advances may allow such methods as beaming power to the ship, inertial-confinement fusion, or mass-conversion of anti-protons to become feasible. Of the possible methods, the anti-proton (anti p), reaction offers the highest potential, the greastest problems, and the most fascination. An Isp of 5000 s would allow the currently envisioned ship to fly to Mars in 3 months and would require about one million pounds to be assembled in Earth orbit. Anti-protons are currently being produced in the world in amounts of about 10/sup 14/ particles per year. With sufficient effort, almost a mg/yr (6 x 10/sup 20/) could be produced by the early 2000s. Current experiments plan to decelerate and capture about 10/sup 10/ or greater anti-protons in an electrostatic Penning trap. Such traps may provide a source of low energy anti p's for development of better storage mechanisms suitable for propulsion. Recently, proposals have been investigated which would amplify the average energy released per anti p used. The proposals entail using the anti p's to produce inertial confinement fusion of a capsule or to produce negative muons which can catalyze fusion. By increasing the energy released per anti p, the effective specific cost, $/joule, can be reduced to attractive levels. These two proposals and other areas of research can be investigated now and will help in assessing the feasibility of an anti p engine.

  3. Earthquake Alert System feasibility study

    SciTech Connect

    Harben, P.E.

    1991-12-01

    An Earthquake Alert System (EAS) could give several seconds to several tens of seconds warning before the strong motion from a large earthquake arrives. Such a system would include a large network of sensors distributed within an earthquake-prone region. The sensors closest to the epicenter of a particular earthquake would transmit data at the speed of light to a central processing center, which would broadcast an area-wide alarm in advance of the spreading elastic wave energy from the earthquake. This is possible because seismic energy travels slowly (3--6 km/s) compared to the speed of light. Utilities, public and private institutions, businesses, and the general public would benefit from an EAS. Although many earthquake protection systems exist that automatically shut down power, gas mains, etc. when ground motion at a facility reaches damaging levels, not EAS -- that is, a system that can provide warning in advance of elastic wave energy arriving at a facility -- has ever been developed in the United States. A recent study by the National Academy of Sciences (NRC, 1991) concludes that an EAS is technically feasible and strongly recommends installing a prototype system that makes use of existing microseismic stations as much as possible. The EAS concept discussed here consists of a distributed network of remote seismic stations that measure weak and strong earth motion and transmit the data in real time to central facility. This facility processes the data and issues warning broadcasts in the form of information packets containing estimates of earthquake location, zero time (the time the earthquake began), magnitude, and reliability of the predictions. User of the warning broadcasts have a dedicated receiver that monitors the warning broadcast frequency. The user also has preprogrammed responses that are automatically executed when the warning information packets contain location and magnitude estimates above a facility`s tolerance.

  4. Earthquake Alert System feasibility study

    SciTech Connect

    Harben, P.E.

    1991-12-01

    An Earthquake Alert System (EAS) could give several seconds to several tens of seconds warning before the strong motion from a large earthquake arrives. Such a system would include a large network of sensors distributed within an earthquake-prone region. The sensors closest to the epicenter of a particular earthquake would transmit data at the speed of light to a central processing center, which would broadcast an area-wide alarm in advance of the spreading elastic wave energy from the earthquake. This is possible because seismic energy travels slowly (3--6 km/s) compared to the speed of light. Utilities, public and private institutions, businesses, and the general public would benefit from an EAS. Although many earthquake protection systems exist that automatically shut down power, gas mains, etc. when ground motion at a facility reaches damaging levels, not EAS -- that is, a system that can provide warning in advance of elastic wave energy arriving at a facility -- has ever been developed in the United States. A recent study by the National Academy of Sciences (NRC, 1991) concludes that an EAS is technically feasible and strongly recommends installing a prototype system that makes use of existing microseismic stations as much as possible. The EAS concept discussed here consists of a distributed network of remote seismic stations that measure weak and strong earth motion and transmit the data in real time to central facility. This facility processes the data and issues warning broadcasts in the form of information packets containing estimates of earthquake location, zero time (the time the earthquake began), magnitude, and reliability of the predictions. User of the warning broadcasts have a dedicated receiver that monitors the warning broadcast frequency. The user also has preprogrammed responses that are automatically executed when the warning information packets contain location and magnitude estimates above a facility's tolerance.

  5. Pawnee-Divernon Educational Feasibility Study.

    ERIC Educational Resources Information Center

    Myers, Dean L., Ed.; And Others

    The feasibility study concerns itself with the possible school district reorganization for the Pawnee and Divernon School Districts. Citizens' committees, boards of education, administration, and teachers provided consultant information about their schools. The evaluation committees, comprised of citizens from the Pawnee and Divernon School…

  6. Beluga coal gasification feasibility study

    SciTech Connect

    Robert Chaney; Lawrence Van Bibber

    2006-07-15

    The objective of the study was to determine the economic feasibility of developing and siting a coal-based integrated gasification combined-cycle (IGCC) plant in the Cook Inlet region of Alaska for the co-production of electric power and marketable by-products. The by-products, which may include synthesis gas, Fischer-Tropsch (F-T) liquids, fertilizers such as ammonia and urea, alcohols, hydrogen, nitrogen and carbon dioxide, would be manufactured for local use or for sale in domestic and foreign markets. This report for Phase 1 summarizes the investigation of an IGCC system for a specific industrial setting on the Cook Inlet, the Agrium U.S. Inc. ('Agrium') fertilizer plant in Nikiski, Alaska. Faced with an increase in natural gas price and a decrease in supply, the Agrium is investigating alternatives to gas as feed stock for their plant. This study considered all aspects of the installation and infrastructure, including: coal supply and cost, coal transport costs, delivery routes, feedstock production for fertilizer manufacture, plant steam and power, carbon dioxide (CO{sub 2}) uses, markets for possible additional products, and environmental permit requirements. The Cook Inlet-specific Phase 1 results, reported here, provided insight and information that led to the conclusion that the second study should be for an F-T plant sited at the Usibelli Coal Mine near Healy, Alaska. This Phase 1 case study is for a very specific IGCC system tailored to fit the chemical and energy needs of the fertilizer manufacturing plant. It demonstrates the flexibility of IGCC for a variety of fuel feedstocks depending on plant location and fuel availability, as well as the available variety of gas separation, gas cleanup, and power and steam generation technologies to fit specific site needs. 18 figs., 37 tabs., 6 apps.

  7. Tivoli Brewery: A Feasibility Study.

    ERIC Educational Resources Information Center

    More, Combs, and Burch, Denver, CO.

    This document reports on a study made to ascertain the feasibility of preserving and restoring all or part of an existing historical site -- the "Tivoli Brewery" -- as a related and integral part of the Auraria Higher Education Center. After investigation of the building's structural integrity, the condition of electrical and mechanical systems,…

  8. Conducting pilot and feasibility studies.

    PubMed

    Cope, Diane G

    2015-03-01

    Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
. PMID:25806886

  9. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... studies. A feasibility study by a recognized independent consultant will be required for all loans, except... a feasibility study for loans to existing businesses when the financial history of the business, the... the exception to the feasibility study for such businesses. An acceptable feasibility study...

  10. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  11. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  12. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited to... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.150 Section...

  13. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited to... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.150 Section...

  14. 7 CFR 4279.150 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited to... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.150 Section...

  15. Lunar Analog Feasibility Study Results

    NASA Technical Reports Server (NTRS)

    Cromwell, Ronita L.; Neigut, Joe

    2009-01-01

    This slide presentation reviews a study designed to determine the feasibility of using a 9.5 deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The effect of different types of compression stockings, the pre-bed rest diet, and the use of a specific exercise program were reviewed for comfort, force verification and plasma volume shift

  16. Dual-Doppler Feasibility Study

    NASA Technical Reports Server (NTRS)

    Huddleston, Lisa L.

    2012-01-01

    When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any

  17. Manzanita Wind Energy Feasibility Study

    SciTech Connect

    Trisha Frank

    2004-09-30

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit. Manzanita has explored the wind resource potential on tribal land and developed a business plan by means of this wind energy feasibility project, which enables Manzanita to make informed decisions when considering the benefits and risks of encouraging large-scale wind power development on their lands. Technical consultant to the project has been SeaWest Consulting, LLC, an established wind power consulting company. The technical scope of the project covered the full range of feasibility assessment activities from site selection through completion of a business plan for implementation. The primary objectives of this feasibility study were to: (1) document the quality and suitability of the Manzanita Reservation as a site for installation and long-term operation of a commercially viable utility-scale wind power project; and, (2) develop a comprehensive and financeable business plan.

  18. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    SciTech Connect

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  19. DPC loading feasibility study report

    SciTech Connect

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  20. Lunar escape systems feasibility study

    NASA Technical Reports Server (NTRS)

    Matzenauer, J. O.

    1976-01-01

    Results are presented for a study conducted to determine the feasibility of simple lunar escape system concepts, to develop a spectrum of operational data, and to identify techniques and configurations suitable for the emergency escape mission. The study demonstrated the feasibility of the lunar emergency escape-to-orbit system (LESS) designed to provide a means for the two-man crew of a lunar module (LM) or extended-stay LM (ELM) to escape from the lunar surface in the event that the LM/ELM ascent stage becomes unsafe or is otherwise unable to take off. The LESS is to carry the two astronauts to a safe lunar orbit, where the Apollo command and service modules (CSM) are to be used for rendezvous and rescue, all within the lifetime of the backpack life support system (about 4 hr). It is concluded that simple manual control modes are sufficient, that simple boost profiles are acceptable, and that one man can deploy and set up the LESS. Initial guidance data can be calculated for the LESS by Mission Control and transmitted via the LM/ELM uplink.

  1. Polarized-interferometer feasibility study

    NASA Astrophysics Data System (ADS)

    Raab, F. H.

    1983-07-01

    The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.

  2. Polarized-interferometer feasibility study

    NASA Technical Reports Server (NTRS)

    Raab, F. H.

    1983-01-01

    The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.

  3. Feasibility studies. The use of NMR spectrometry as a possible substitute of or complement to several analytical tests in pharmacopoeia monographs.

    PubMed

    McEwen, I; Arvidsson, T

    2012-04-01

    NMR spectrometry has many analytical applications; for instance, the identification of known substances; the structure elucidation of unknown ones; the quantification of APIs, impurities, solvent and water; kinetic studies, stereochemistry determinations, and the analyses of complex mixtures as in metabonomics. NMR spectrometry has the potential to substitute or complement existing analyses that are performed on APIs. In this work, 4 different NMR analyses were done on 2 APIs: fluvastatin sodium and benzalkonium chloride with good results. PMID:23327894

  4. Shuttle seated extraction feasibility study

    NASA Technical Reports Server (NTRS)

    Onagel, Steven R.; Bement, Laurence J.

    1989-01-01

    Following the Space Shuttle Challenger accident, serious attention has turned to in-flight escape. Prior to the resumption of flight, a manual bailout system was qualified and installed. For the long term, a seated extraction system to expand the escape envelope is being investigated. This paper describes a 1987 study, conducted jointly by NASA/Johnson Space Center and Langley Research Center, to determine the feasibility of modifying the Space Shuttle Orbiters to incorporate the seated extraction system. Results of the study are positive, indicating retrofit opportunity and high probability of escape for early ascent, late entry, and even for uncontrolled flight such as the Challenger breakup. The system, as envisioned, can extract seven crewmembers within two seconds.

  5. Shuttle seated extraction feasibility study

    NASA Astrophysics Data System (ADS)

    Onagel, Steven R.; Bement, Laurence J.

    Following the Space Shuttle Challenger accident, serious attention has turned to in-flight escape. Prior to the resumption of flight, a manual bailout system was qualified and installed. For the long term, a seated extraction system to expand the escape envelope is being investigated. This paper describes a 1987 study, conducted jointly by NASA/Johnson Space Center and Langley Research Center, to determine the feasibility of modifying the Space Shuttle Orbiters to incorporate the seated extraction system. Results of the study are positive, indicating retrofit opportunity and high probability of escape for early ascent, late entry, and even for uncontrolled flight such as the Challenger breakup. The system, as envisioned, can extract seven crewmembers within two seconds.

  6. IPNS upgrade: A feasibility study

    SciTech Connect

    1995-04-01

    Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R&D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R&D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately.

  7. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current condition and to develop possible methods for lake restoration and protection. (a) The diagnostic portion...

  8. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current condition and to develop possible methods for lake restoration and protection. (a) The diagnostic portion...

  9. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Diagnostic-feasibility study. 35.1605-8... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current condition and to develop possible methods for lake restoration and protection. (a) The diagnostic portion...

  10. Photoacoustic biopsy: a feasibility study

    NASA Astrophysics Data System (ADS)

    Xu, Guan; Tomlins, Scott A.; Siddiqui, Javed; Davis, Mandy A.; Kunju, Lakshmi P.; Wei, John T.; Wang, Xueding

    2015-03-01

    Photoacoustic (PA) measurements encode the information associated with both physical microstructures and chemical contents in biological tissues. A two-dimensional physio-chemical spectrogram (PCS) can be formulated by combining the power spectra of PA signals acquired at a series of optical wavelengths. The analysis of PCS, or namely PA physio-chemical analysis (PAPCA), enables the quantification of the concentrations and the spatial distributions of a variety of chemical components in the tissue. The chemical components and their distribution are the two major features observed in the biopsy procedures which have been regarded as the gold standard of the diagnosis of many diseases. Taking non-alcoholic fatty liver disease and prostate cancer for example, this study investigates the feasibility of PAPCA in characterizing the histopathological changes in the diseased conditions in biological tissue. A catheter based setup facilitating measurement in deep tissues was also proposed and tested.

  11. Intersatellite quantum communication feasibility study

    NASA Astrophysics Data System (ADS)

    Tomaello, Andrea; Dall'Arche, Alberto; Naletto, Giampiero; Villoresi, Paolo

    2011-08-01

    The shift in the Communication paradigm from the bit to the qubit is increasingly exploited in terrestrial long range links and networks, with strong potentials in secure communications, quantum computing and metrology. The space-to-ground quantum key distribution was also considered as feasible. A new different scenario for the quantum communications is that of the intersatellite link. In this study we focus on the extension of intersatellite communications into the quantum domain. The long distances involved and the fast relative motion are severe constraints, partially compensated by the absence of beam degradation due to the propagation in the atmosphere as well as the relatively low background noise level. We address the conception of the optical terminal and the predicted performances in the case of constellations of LEO and MEO satellite including the quantum communications and quantum teleportation.

  12. Muon Muon Collider: Feasibility Study

    SciTech Connect

    Gallardo, J.C.; Palmer, R.B.; Tollestrup, A.V.; Sessler, A.M.; Skrinsky, A.N.; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  13. Postsecondary Student Outcomes: A Feasibility Study. Feasibility Report.

    ERIC Educational Resources Information Center

    Korb, Roslyn

    This report presents the findings from a study designed: (1) to determine the current availability and utility of student outcome statistics in the nation; and (2) to examine the feasibility and desirability of nationwide institutional reporting of student outcome data. Following an introductory section on the purposes of the report and the…

  14. Commercial feasibility of lignocellulose biodegradation: possibilities and challenges.

    PubMed

    Taha, Mohamed; Foda, Mohamed; Shahsavari, Esmaeil; Aburto-Medina, Arturo; Adetutu, Eric; Ball, Andrew

    2016-04-01

    The main source of energy supply worldwide is generated from fossil fuels, which undoubtedly are finite and non-environmental friendly resources. Bioethanol generated from edible resources also has economic and environmental concerns. Despite the immense attention to find an alternative (inedible) source of energy in the last two decades, the total commercial production of 1st generation biofuels is limited and equivalent only to approximately 3% of the total road transport fuel consumption. Lignocellulosic waste represents the most abundant biomass on earth and could be a suitable candidate for producing valuable products including biofuels. However, cellulosic bioethanol has not been produced on a large scale due to the technical barriers involved that make the commercial production of cellulosic bioethanol not economically feasible. This review examines some of the current barriers to commercialization of the process. PMID:27011055

  15. Feasibility study of a nuclear exciton laser

    NASA Astrophysics Data System (ADS)

    ten Brinke, Nicolai; Schützhold, Ralf; Habs, Dietrich

    2013-05-01

    Nuclear excitons known from Mössbauer spectroscopy describe coherent excitations of a large number of nuclei—analogous to Dicke states (or Dicke super-radiance) in quantum optics. In this paper, we study the possibility of constructing a laser based on these coherent excitations. In contrast to the free-electron laser (in its usual design), such a device would be based on stimulated emission and thus might offer certain advantages, e.g., regarding energy-momentum accuracy. Unfortunately, inserting realistic parameters, the window of operability is probably not open (yet) to present-day technology; but our design should be feasible in the UV regime, for example.

  16. Asteroid Return Mission Feasibility Study

    NASA Technical Reports Server (NTRS)

    Brophy, John R.; Gershman, Robert; Landau, Damon; Polk, James; Porter, Chris; Yeomans, Don; Allen, Carlton; Williams, Willie; Asphaug, Erik

    2011-01-01

    This paper describes an investigation into the technological feasibility of finding, characterizing, robotically capturing, and returning an entire Near-Earth Asteroid (NEA) to the International Space Station (ISS) for scientific investigation, evaluation of its resource potential, determination of its internal structure and other aspects important for planetary defense activities, and to serve as a testbed for human operations in the vicinity of an asteroid. Reasonable projections suggest that several dozen candidates NEAs in the size range of interest (approximately 2-m diameter) will be known before the end of the decade from which a suitable target could be selected. The conceptual mission objective is to return an approximately 10,000-kg asteroid to the ISS in a total flight time of approximately 5 years using a single Evolved Expendable Launch Vehicle. Preliminary calculations indicate that this could be accomplished using a solar electric propulsion (SEP) system with high-power Hall thrusters and a maximum power into the propulsion system of approximately 40 kW. The SEP system would be used to provide all of the post-launch delta V. The asteroid would have an unrestricted Earth return Planetary Protection categorization, and would be curated at the ISS where numerous scientific and resource utilization experiments would be conducted. Asteroid material brought to the ground would be curated at the NASA Johnson Space Center. This preliminary study identified several areas where additional work is required, but no show stoppers were identified for the approach that would return an entire 10,000-kg asteroid to the ISS in a mission that could be launched by the end of this decade.

  17. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Feasibility studies. 1980.442 Section 1980.442... studies. A feasibility study by a recognized independent consultant will be required for all loans, except as provided in this paragraph. The cost of the study will be borne by the borrower and may be...

  18. WERF MACT Feasibility Study Report

    SciTech Connect

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  19. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... initiate a feasibility study to determine whether there is justification to encourage and maintain a Community College for such tribe or tribes. The feasibility study shall give consideration to the following..., linguistics, or cultural differences; (4) Isolation; (5) Presence of alternate education sources; (6)...

  20. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... initiate a feasibility study to determine whether there is justification to encourage and maintain a Community College for such tribe or tribes. The feasibility study shall give consideration to the following..., linguistics, or cultural differences; (4) Isolation; (5) Presence of alternate education sources; (6)...

  1. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... initiate a feasibility study to determine whether there is justification to encourage and maintain a Community College for such tribe or tribes. The feasibility study shall give consideration to the following..., linguistics, or cultural differences; (4) Isolation; (5) Presence of alternate education sources; (6)...

  2. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... initiate a feasibility study to determine whether there is justification to encourage and maintain a Community College for such tribe or tribes. The feasibility study shall give consideration to the following..., linguistics, or cultural differences; (4) Isolation; (5) Presence of alternate education sources; (6)...

  3. 25 CFR 41.7 - Feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION GRANTS TO TRIBALLY CONTROLLED COMMUNITY COLLEGES AND NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants under § 41.8 of this subpart may be...

  4. Sault Tribe Wind Energy Feasibility Study

    SciTech Connect

    Toni Osterhout; Global Energy Concepts

    2005-07-31

    The Sault Tribe conducted a feasibility study on tribal lands in the Upper Peninsula of Michigan to determine the technical and economic feasibility of both small and large-scale wind power development on tribal lands. The study included a wind resource assessment, transmission system analysis, engineering and regulatory analyzes and assessments.

  5. Chirp signal generator feasibility study

    NASA Astrophysics Data System (ADS)

    Chomiki, M.; Genauzeau, F.

    1983-03-01

    The feasibility of a signal generator with 100 microsec temporal dispersion, and 330 MHz frequency dispersion, for the ERS-1 (ESA satellite) radar altimeter, with a solid state transmitter, is demonstrated. Two surface wave dispersive filters (20 and 80 microsec dispersion) are cascaded with a frequency multiplier to give a 900 MHz output signal. The first filter receives an impulse which ensures an output signal to noise ratio 20 dB. The chirp signal output level is 0 dBm; amplitude fluctuation 2 dBcc, phase error compared with theory 10 deg rms; short term jitter 100 psec. The generator model occupies 0.5 l, and consumes 7 W.

  6. Lunar Wireless Power Transfer Feasibility Study

    SciTech Connect

    Sheldon Freid, et al.

    2008-06-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  7. NASA CPAS Drogue Textile Riser Feasibility Study

    NASA Technical Reports Server (NTRS)

    Hennings, Elsa J.; Petersen, Michael L.; Anderson, Brian; Johnson, Brian

    2015-01-01

    Steel cable was chosen for the lower end of the drogue and main parachute risers on NASA's Orion Multi Purpose Crew Vehicle Parachute Assembly System (CPAS) to protect the risers from extreme temperatures and abrasion should they contact the crew module during deployment, as was done for Apollo. Due to the weight and deployment complexity inherent in steel, there was significant interest in the possibility of substituting textile for steel for the drogue and main parachute risers. However, textile risers could be damaged when subjected to high temperature and abrasion. Investigations were consequently performed by a subset of the authors to determine whether sacrificial, non-load-bearing textile riser covers could be developed to mitigate the thermal and abrasion concerns. Multiple material combinations were tested, resulting in a cover design capable of protecting the riser against severe riser/crew module contact interactions. A feasibility study was then conducted to evaluate the performance of the textile drogue riser cover in relevant abrasive environments. This paper describes the testing performed and documents the results of this feasibility study.

  8. Ecological Feasibility Studies in Restoration Decision Making

    NASA Astrophysics Data System (ADS)

    Hopfensperger, Kristine N.; Engelhardt, Katharina A. M.; Seagle, Steven W.

    2007-06-01

    The restoration of degraded systems is essential for maintaining the provision of valuable ecosystem services, including the maintenance of aesthetic values. However, restoration projects often fail to reach desired goals for a variety of ecologic, financial, and social reasons. Feasibility studies that evaluate whether a restoration effort should even be attempted can enhance restoration success by highlighting potential pitfalls and gaps in knowledge before the design phase of a restoration. Feasibility studies also can bring stakeholders together before a restoration project is designed to discuss potential disagreements. For these reasons, a feasibility study was conducted to evaluate the efficacy of restoring a tidal freshwater marsh in the Potomac River near Alexandria, Virginia. The study focused on science rather than engineering questions, and thus differed in approach from other feasibility studies that are mostly engineering driven. The authors report the framework they used to conduct a feasibility study to inform other potential restoration projects with similar goals. The seven steps of the framework encompass (1) initiation of a feasibility study, (2) compilation of existing data, (3) collection of current site information, (4) examination of case studies, (5) synthesis of information in a handbook, (6) meeting with selected stakeholders, and (7) evaluation of meeting outcomes. By conducting a feasibility study using the seven-step framework, the authors set the stage for conducting future compliance studies and enhancing the chance of a successful restoration.

  9. Ecological feasibility studies in restoration decision making.

    PubMed

    Hopfensperger, Kristine N; Engelhardt, Katharina A M; Seagle, Steven W

    2007-06-01

    The restoration of degraded systems is essential for maintaining the provision of valuable ecosystem services, including the maintenance of aesthetic values. However, restoration projects often fail to reach desired goals for a variety of ecologic, financial, and social reasons. Feasibility studies that evaluate whether a restoration effort should even be attempted can enhance restoration success by highlighting potential pitfalls and gaps in knowledge before the design phase of a restoration. Feasibility studies also can bring stakeholders together before a restoration project is designed to discuss potential disagreements. For these reasons, a feasibility study was conducted to evaluate the efficacy of restoring a tidal freshwater marsh in the Potomac River near Alexandria, Virginia. The study focused on science rather than engineering questions, and thus differed in approach from other feasibility studies that are mostly engineering driven. The authors report the framework they used to conduct a feasibility study to inform other potential restoration projects with similar goals. The seven steps of the framework encompass (1) initiation of a feasibility study, (2) compilation of existing data, (3) collection of current site information, (4) examination of case studies, (5) synthesis of information in a handbook, (6) meeting with selected stakeholders, and (7) evaluation of meeting outcomes. By conducting a feasibility study using the seven-step framework, the authors set the stage for conducting future compliance studies and enhancing the chance of a successful restoration. PMID:17453281

  10. Preliminary guided rocket feasibility study

    NASA Technical Reports Server (NTRS)

    Nolan, M. B.; Celmer, J. J.

    1973-01-01

    The feasibility of actively guiding sounding rockets to reduce impact dispersion has been investigated. The theoretical probability of range safety thrust termination for several high performance rockets was combined with the cost of acquiring the extended range at White Sands Missile Range (WSMR) to establish a guidance system price ceiling of $20K per flight. Guiding the Black Brant VC (BBVC) for the first five seconds of flight results in sufficient dispersion reduction to impact within the standard range boundaries at WSMR. The guidance system thrust level required to statically control the vehicle to a nominal-wind weighted trajectory for five seconds is between 150-200 pounds. A six-degree-of-freedom trajectory program with guidance simulation capability has been developed and the equations are presented.

  11. Focused feasibility study final field sampling plan

    SciTech Connect

    Not Available

    1993-10-01

    At the direction of APG-DSHE, the project has been separated into three work phases to allow for data evaluation and risk determination before a full focused feasibility study is conducted. Phase I of the project consists of an aerial photography investigation, surface/marine geophysical surveys, a flowmeter logging program, sampling surface and subsurface soils, an ecological risk assessment of the Beach Point Test Site, and analysis of chemical groundwater data generated through the separate Canal Creek Groundwater Monitoring Program. Tasks described for Phase II of the FFS will be performed upon evaluation of data needs identified subsequent to completion of the Phase I tasks. Phase II investigations include installation fo additional groundwater monitoring wells, sampling of the new and previously existing monitoring wells, a flowmeter logging program, downhole geophysical logging of new monitoring wells (and one previously existing well), and possible soil gas surveys.

  12. Conceptual Thermal Treatment Technologies Feasibility Study

    SciTech Connect

    Suer, A.

    1996-02-28

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects.

  13. Three Affliated Tribes Renewable Energy Feasibility Study

    SciTech Connect

    Belvin Pete; Kent Good; Krista Gordon; Ed McCarthy,

    2006-05-26

    The Three Affliated Tribes on the Fort Berthold Reservation studied the feasibility of a commercial wind facility on land selected and owned by the Tribes and examined the potential for the development of renewable energy resources on Tribal Lands.

  14. White Earth Biomass/Biogas Feasibility Study

    SciTech Connect

    Triplett, Michael

    2015-03-12

    The White Earth Nation examined the feasibility of cost savings and fossil energy reduction through the installation of biogas/biomass boiler at the tribal casino. The study rejected biogas options due to availability and site constraints, but found a favorable environment for technical and financial feasibility of installing a 5 MMBtu hot water boiler system to offset 60-70 percent of current fuel oil and propane usage.

  15. Satellite animal tracking feasibility studies

    NASA Technical Reports Server (NTRS)

    Buechner, H. K.

    1975-01-01

    A study was initiated in Tsavo National Park to determine movements and home ranges of individual elephants and their relations to overall distribution patterns and environmental factors such as rainfall. Methods used were radio tracking and observations of visually identifiable individuals. Aerial counts provided data on overall distribution. Two bulls and two cows were radio-tagged in Tsavo West and two bulls and four cows in Tsavo East, providing home range and movement data. The movements of individuals were useful in interpreting relatively major shifts in elephant distribution. Results point to the following preliminary conclusions: (1) elephants in the Tsavo area undertook long distance movements in fairly direct response to localized rainfall; (2) a subdivision of the overall population into locally distinct units may exist during the dry season but did not occur after significant rainfall; and (3) food appears to be the primary factor governing movements and distribution of elephants in the area.

  16. Feasibility Study of Eval Balloons

    NASA Astrophysics Data System (ADS)

    Saito, Yoshitaka; Kamioka, Eiji; Toriumi, Michihiko; Matsuzaka, Yukihiko; Namiki, Michiyoshi; Izutsu, Naoki; Ohta, Shigco; Yamagami, Takamasa; Nishimura, Jun; Matsushima, Kiyoho

    For a new balloon material, we have been studying the properties of an EVAL (Ethylene-Vinyl-ALcohol) film during a part of few years. The EVAL film is a product of Kurare Plastic Company, and has mechanical properties similar to that of a Mylar film. Besides this strong mechanical strength. we found that the EVAL film has several characteristics which seems to be suitable for the balloon material. Those are:

  17. Sandwiched EVAL films laminated by polyethylene films can be heat-sealed,
  18. Gas leakage through the EVAL film is extremely low, and for Helium gas, it is almost 100 times less than that of a Mylar film.
  19. The EVAL film is transparent in the optical band. while it efficiently absorbs the infrared radiation from the earth.In 1997, we have carried out a test flight from the Sanriku Balloon Center using a small balloon with a volume of 1000 m3. The balloon reached an altitude of 22 km successfully and showed a maximum burst pressure of 2.1 g/cm2.In this paper, basic properties of the EVAL film and performance of the test balloon are described

  20. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current condition and to develop possible methods for lake restoration and protection. (a) The diagnostic portion of..., demographic, socio-economic, and other pertinent characteristics of the lake and its watershed....

  21. 40 CFR 35.1605-8 - Diagnostic-feasibility study.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Freshwater Lakes § 35.1605-8 Diagnostic-feasibility study. A two-part study to determine a lake's current condition and to develop possible methods for lake restoration and protection. (a) The diagnostic portion of..., demographic, socio-economic, and other pertinent characteristics of the lake and its watershed....

  22. Artemis: Results of the engineering feasibility study

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Information is given in viewgraph form for the Engineering Feasibility Study of the Artemis Project, a plan to establish a permanent base on the Moon. Topics covered include the Common Lunar Lander (CLL), lunar lander engineering study results, lunar lander trajectory analysis, lunar lander conceptual design and mass properties, the lunar lander communication subsystem design, and product assurance.

  23. Children's Fitness Testing: A Feasibility Study

    ERIC Educational Resources Information Center

    Harris, J.; Cale, L.

    2007-01-01

    Objective: This study aimed to determine whether it was necessary, cost effective and practical to investigate Welsh children's fitness levels in order to promote active, healthy lifestyles. Design: A multi-method study comprising a comprehensive review of literature, a questionnaire survey and interviews. Setting: This was a feasibility study…

  1. Pinellas Plant feasibility study. Final report

    SciTech Connect

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  2. Flow Liner Slot Edge Replication Feasibility Study

    NASA Technical Reports Server (NTRS)

    Newman, John A.; Willard, Scott A.; Smith, Stephen W.; Piascik, Robert S.

    2006-01-01

    Surface replication has been proposed as a method for crack detection in space shuttle main engine flowliner slots. The results of a feasibility study show that examination of surface replicas with a scanning electron microscope can result in the detection of cracks as small as 0.005 inch, and surface flaws as small as 0.001 inch, for the flowliner material.

  3. Adult Skills Training Center: Feasibility Study.

    ERIC Educational Resources Information Center

    Skalski, John M.; Baratta, Anthony N.

    A 4-phase project, this study was conducted to determine the feasibility of a bilingual vocational skill training program for out-of-school youth and adults of the Perth Amboy Hispanic community. Sampled were 494 out-of-school youth and adults in the area. Findings include: (1) There is a significant need for an adult vocational skills training…

  4. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Feasibility studies. 4279.250 Section 4279.250 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Biorefinery Assistance...

  5. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility studies. 4279.250 Section 4279.250 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Biorefinery Assistance...

  6. 7 CFR 4279.250 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility studies. 4279.250 Section 4279.250 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GUARANTEED LOANMAKING Biorefinery Assistance...

  7. D-21B RBCC Modification Feasibility Study

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This report presents a feasibility study on the modifications required to re-engine the Lockheed D-21 Drone for use as a NASA RBCC engine. An introduction, background information, engine configuration and performance, propulsion system integration, loads/thermal analysis, avionics/systems, flight test results, costs and work schedule, and some conclusions are presented.

  8. Renewable Energy Feasibility Study Final Report

    SciTech Connect

    Rooney, Tim

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including:  Technical appropriateness;  Solar resource characteristics and expected system performance;  Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including:  Resource analysis and costs;  Identification of potential bioenergy projects;  Technical and economic (levelized cost of energy) modeling for selected project configuration.

  9. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  10. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  11. 7 CFR 4280.182 - Servicing feasibility study grants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Servicing feasibility study grants. 4280.182 Section... America Program General Renewable Energy System Feasibility Study Grants § 4280.182 Servicing feasibility study grants. Feasibility study grants will be serviced in accordance with Departmental regulations;...

  12. Numerical aerodynamic simulation facility feasibility study

    NASA Technical Reports Server (NTRS)

    1979-01-01

    There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year. Facets of the work described include the hardware configuration, software, user language, and fault tolerance.

  13. Feasibility Study on Lunar and Mars Exploration

    NASA Astrophysics Data System (ADS)

    Mori, Hidehiko; Takazawa, Yoshisada; Kaneko, Yutaka; Kawazoe, Takeshi; Takano, Yutaka; Namura, Eijiro

    1996-10-01

    This technical memorandum summarizes the results of an in-house study on lunar and Mars drone explorations - observation, landing and mobile explorations and sample returns for lunar and Mars respectively. So far, lunar and planet explorations have been primarily performed by the United States and the Soviet Union. ISAS and ESA have also contributed to some extent. The main purpose has been scientific exploration. There are some arguments that lunar and planet explorations should be performed for scientific purposes and the exploitation of them is not necessary. However, most scientific research involve the existence and survival of humankind, so it is not the fact that they cannot be organized from the side of exploitation. Especially, if NASDA makes approaches to lunar and Mars exploration, it should inevitably embrace exploitation plans. In this preface we provide the outline of lunar and Mars exploitation scenarios set up as a premise of the review on lunar and Mars unmanned exploration plans. Various reviews have been performed on whether the Moon or Mars would allow for human activities or survival. Among them, He mill, the solar powered satellite material mill and construction project of relay station to Mars as well as Mars teraforming plan have important issues. These projects have not yet become feasible because their expected investments are too large to make them practical. However, the present time seems the most appropriate to get with lunar and Mars exploitation projects under international cooperation since the realization of a space station is imminent and the international cooperation is being created with the participation of Russia. The international space station project will be continued until the year 2015. The post project has not yet been decided. Therefore, we expect that Japan would propose two successive projects, one is to construct an orbital service station combining manned abilities of the station and orbital service system and the

  14. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  15. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  16. 7 CFR 1737.70 - Description of feasibility study.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Description of feasibility study. 1737.70 Section... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study. (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated...

  17. Aircraft towing feasibility study. Final report

    SciTech Connect

    Not Available

    1980-09-01

    Energy costs and availability are major concerns in most parts of the world. Many ways of increasing energy supply and reducing consumption are being proposed and investigated. One that holds considerable promise is the extended towing of aircraft between airport runways and terminal gate areas with engines shut down. This study provides a preliminary assessment of the constraints on and feasibility of extended aircraft towing. Past aircraft towing experience and the state-of-the-art in towing equipment are reviewed. Safety and operational concerns associated with aircraft towing are identified, and the benefits and costs of implementing aircraft towing at 20 major US airports are analyzed. It was concluded that extended aircraft towing is technically feasible and that substantial reductions in aircraft fuel consumption and air pollutant emissions can be achieved through its implementation. It was also concluded that, although capital and operating costs associated with towing would be increased, net savings could generally be attained at these airports. Because of the lack of past experience and the necessity of proving the cost effectiveness of the towing concept, a demonstration of the feasibility of large-scale aircraft towing is necessary. The study evaluates the suitability of the 20 study airports as potential demonstration sites and makes recommendations for the first demonstration project.

  18. Feasibility studies of aquifer thermal energy storage

    SciTech Connect

    Hall, S. H.

    1993-01-01

    Determining the feasibility of using aquifer thermal energy storage (ATES) for a particular heating or cooling application is an interdisciplinary effort, requiring (at a minimum) expertise in engineering and hydrology. The feasibility study should proceed in two distinct stages. The first stage, which is limited in scope and detail, is intended to show if an ATES system is technically and economically suited to the application. Focus of this preliminary investigation is on revealing the existence of factors that might weigh heavily against the use of ATES methods, and, in the absence of such factors, on choosing a suitable scale for the ATES plant and well field. The results of the preliminary investigation are used to determine if more detailed investigation--including field studies--are justified, and to facilitate comparing the advantages of ATES to those of other means of providing heating or cooling. The second stage of the feasibility study focuses on detailed aquifer characterization, refinement of engineering design and cost estimates, and economic and environmental risk analysis. The results of this investigation, if favorable, will be used to justify the expense of constructing the ATES system.

  19. COLD-SAT feasibility study safety analysis

    NASA Technical Reports Server (NTRS)

    Mchenry, Steven T.; Yost, James M.

    1991-01-01

    The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

  20. Feasibility study on the thorium fueled boiling water breeder reactor

    SciTech Connect

    PetrusTakaki, N.

    2012-07-01

    The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

  1. The Gemini Instrument Feasibilities Studies project

    NASA Astrophysics Data System (ADS)

    Hibon, Pascale; Goodsell, Stephen J.; Hardie, Kayla

    2015-01-01

    The Gemini Instrument Feasibilities Studies (GIFS) project is part of a program that will provide a number of community-created science-driven instrumentation design study reports and presentations to the observatory, conforming to a number of desired principles.By the time of the AAS, Gemini will have received a number of proposals and will be evaluating them shortly afterwards with the expectation of placing 3 or more feasibility study contracts based on a facility instrument costing between USD 8,000,000 and USD 12,000,000. These instrument studies will provide synergies with new capabilities coming online (e.g. LSST, JWST, ALMA, etc)Following the project, Gemini together with the Gemini Science and Technical Advisory Committee (STAC) and input from the wider community will decide on the top-level instrument requirements for the next facility instrument (Gen4#3) and launch a targeted Request for Proposals to design, build, test and deliver a suitable instrument. Gemini expects to release an RfP for Gen4#3 in Q4 2015.Each feasibility study will include fully developed science case(s), optical, mechanical, electronic and software design elements at the conceptual level as needed to demonstrate the technical viability. In particular, each design study will thoroughly identify and mitigate key risks.Each study team will present a status summary presentation at the 2015 Meeting on the Science and Future of Gemini held in Toronto in June 2015. The final GIFS reports and presentations are expected in Sept 2015.We will discuss the status of GIFS and the currently plans for Gen4#3.

  2. North Bethesda transitway feasibility study. Final report

    SciTech Connect

    Not Available

    1992-12-01

    The study focused on private sector financing of transit improvements between North Bethesda business and commercial areas and the Grosvenor Metrorail Station. As part of this study, an investigation was made of the feasibility of using any of a number of advanced vehicle and guideway technologies commonly referred to as People Movers in this corridor. Recognizing the potential applicability of other transit technologies such as light rail or enhanced bus service, we have designated the potential alignment as a transitway to better reflect the potential for a wide range of transit services. The body of the report refers to People Mover throughout and should be interpreted as referring to a transitway.

  3. Final LDRD Report for Feasibility Study

    SciTech Connect

    Remington, B; Klein, R

    2004-02-13

    Extreme conditions of density and temperature of interest to DNT are similar to conditions of low-altitude atmospheres of neutron stars. Consequently, HED experimental capabilities being developed at LLNL (NIF, petawatt lasers) will open the door to laboratory studies of neutron star atmospheres. This capability will seed a new era in the study of extreme physics generated by strongly radiation dominated flows and laser-plasma interactions for the laboratory study of distant astrophysical phenomena. Indeed as has been noted by the recent Davidsen report on Frontiers of HEDPP (p. 85) ''Accretion disks and atmospheres of neutron stars likely fall in the radiation-dominated regimes, where the radiation pressure dominates the particle pressure. Unique dynamics can ensue in such a radiation dominated plasma, especially in the presence of turbulent flows and magnetic fields. With the next generation of HED facilities such as ZR, NIF, coupled with ultra-intense laser ''heater beams'', it may become possible to create radiation-dominated plasma conditions in the laboratory relevant to neutron star (and black hole) accretion dynamics''. With the recent advent of the Rossi XTE time-resolved x-ray satellite, we have entered a new era in our ability to probe the physics and dynamics of neutron stars and black holes on rapid timescales not previously possible. With RXTE, we have diagnosed the dynamics occurring near the surface of a neutron star on timescales less than a millisecond, and have discovered a new phenomena, photon bubble instabilities, in an a accreting X-ray pulsar Centaurus X-3, some 30,000 light years across the galaxy. (Jerningan, Klein and Arons, ApJ, 2000) We in fact, predicted this instability in simulations with time-dependent 2D radiation-hydrodynamics codes that we had developed. (Klein et al. ApJ 1996a, 1996b) Strongly magnetized neutron stars accrete mass from a nearby normal star that is in orbit with the neutron star. The mass is transferred by way of

  4. Crew emergency return vehicle autoland feasibility study

    NASA Technical Reports Server (NTRS)

    Bossi, J. A.; Langehough, M. A.; Lee, K. L.

    1989-01-01

    The crew emergency return vehicle (CERV) autoland feasibility study focused on determining the controllability of the NASA Langley high lift over drag CERV for performing an automatic landing at a prescribed runway. An autoland system was developed using integral linear quadratic Gaussian (LQG) design techniques. The design was verified using a nonlinear 6 DOF simulation. Simulation results demonstrate that the CERV configuration is a very flyable configuration for performing an autoland mission. Adequate stability and control was demonstrated for wind turbulence and wind shear. Control surface actuator requirements were developed.

  5. Advanced Space Suit Insulation Feasibility Study

    NASA Technical Reports Server (NTRS)

    Trevino, Luis A.; Orndoff, Evelyne S.

    2000-01-01

    For planetary applications, the space suit insulation has unique requirements because it must perform in a dynamic mode to protect humans in the harsh dust, pressure and temperature environments. Since the presence of a gaseous planetary atmosphere adds significant thermal conductance to the suit insulation, the current multi-layer flexible insulation designed for vacuum applications is not suitable in reduced pressure planetary environments such as that of Mars. Therefore a feasibility study has been conducted at NASA to identify the most promising insulation concepts that can be developed to provide an acceptable suit insulation. Insulation concepts surveyed include foams, microspheres, microfibers, and vacuum jackets. The feasibility study includes a literature survey of potential concepts, an evaluation of test results for initial insulation concepts, and a development philosophy to be pursued as a result of the initial testing and conceptual surveys. The recommended focus is on microfibers due to the versatility of fiber structure configurations, the wide choice of fiber materials available, the maturity of the fiber processing industry, and past experience with fibers in insulation applications

  6. Feasibility study for convertible engine torque converter

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The feasibility study has shown that a dump/fill type torque converter has excellent potential for the convertible fan/shaft engine. The torque converter space requirement permits internal housing within the normal flow path of a turbofan engine at acceptable engine weight. The unit permits operating the engine in the turboshaft mode by decoupling the fan. To convert to turbofan mode, the torque converter overdrive capability bring the fan speed up to the power turbine speed to permit engagement of a mechanical lockup device when the shaft speed are synchronized. The conversion to turbofan mode can be made without drop of power turbine speed in less than 10 sec. Total thrust delivered to the aircraft by the proprotor, fan, and engine during tansient can be controlled to prevent loss of air speed or altitude. Heat rejection to the oil is low, and additional oil cooling capacity is not required. The turbofan engine aerodynamic design is basically uncompromised by convertibility and allows proper fan design for quiet and efficient cruise operation. Although the results of the feasibility study are exceedingly encouraging, it must be noted that they are based on extrapolation of limited existing data on torque converters. A component test program with three trial torque converter designs and concurrent computer modeling for fluid flow, stress, and dynamics, updated with test results from each unit, is recommended.

  7. Battery energy storage market feasibility study

    SciTech Connect

    Kraft, S.; Akhil, A.

    1997-07-01

    Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  8. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for... for an eligible feasibility study project under this subpart to any one recipient will not exceed $50... studies shall be specific to the completion of the feasibility study (refer to Appendix E of this...

  9. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for... for an eligible feasibility study project under this subpart to any one recipient will not exceed $50... studies shall be specific to the completion of the feasibility study (refer to Appendix E of this...

  10. 7 CFR 4280.173 - Grant funding for feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... America Program General Renewable Energy System Feasibility Study Grants § 4280.173 Grant funding for... for an eligible feasibility study project under this subpart to any one recipient will not exceed $50... studies shall be specific to the completion of the feasibility study (refer to Appendix E of this...

  11. Aleutian Pribilof Islands Wind Energy Feasibility Study

    SciTech Connect

    Bruce A. Wright

    2012-03-27

    Under this project, the Aleutian Pribilof Islands Association (APIA) conducted wind feasibility studies for Adak, False Pass, Nikolski, Sand Point and St. George. The DOE funds were also be used to continue APIA's role as project coordinator, to expand the communication network quality between all participants and with other wind interest groups in the state and to provide continued education and training opportunities for regional participants. This DOE project began 09/01/2005. We completed the economic and technical feasibility studies for Adak. These were funded by the Alaska Energy Authority. Both wind and hydro appear to be viable renewable energy options for Adak. In False Pass the wind resource is generally good but the site has high turbulence. This would require special care with turbine selection and operations. False Pass may be more suitable for a tidal project. APIA is funded to complete a False Pass tidal feasibility study in 2012. Nikolski has superb potential for wind power development with Class 7 wind power density, moderate wind shear, bi-directional winds and low turbulence. APIA secured nearly $1M from the United States Department of Agriculture Rural Utilities Service Assistance to Rural Communities with Extremely High Energy Costs to install a 65kW wind turbine. The measured average power density and wind speed at Sand Point measured at 20m (66ft), are 424 W/m2 and 6.7 m/s (14.9 mph) respectively. Two 500kW Vestas turbines were installed and when fully integrated in 2012 are expected to provide a cost effective and clean source of electricity, reduce overall diesel fuel consumption estimated at 130,000 gallons/year and decrease air emissions associated with the consumption of diesel fuel. St. George Island has a Class 7 wind resource, which is superior for wind power development. The current strategy, led by Alaska Energy Authority, is to upgrade the St. George electrical distribution system and power plant. Avian studies in Nikolski and

  12. Feasibility Study for Paragon - Bisti Solar Ranch

    SciTech Connect

    Benally, Thomas

    2015-06-01

    The Navajo Hopi Land Commission Office (NHLCO) and Navajo Nation (NN) plan to develop renewable energy (RE) projects on the Paragon-Bisti Ranch (PBR) lands, set aside under the Navajo Hopi Land Settlement Act (NHLSA) for the benefit of Relocatees. This feasibility study (FS), which was funded under a grant from DOE’s Tribal Energy Program (TEP), was prepared in order to explore the development of the 22,000-acre PBR in northwestern New Mexico for solar energy facilities. Topics covered include: • Site Selection • Analysis of RE, and a Preliminary Design • Transmission, Interconnection Concerns and Export Markets • Financial and Economic Analysis • Environmental Study • Socioeconomic and Cultural Factors • Next Steps.

  13. Exoskeleton for Soldier Enhancement Systems Feasibility Study

    SciTech Connect

    Jansen, J.F.

    2000-09-28

    The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton have advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.

  14. Clustered Lance Booster (CLB) feasibility study

    NASA Astrophysics Data System (ADS)

    1993-01-01

    Loral Vought (LV) was requested to investigate the feasibility of clustering four Lance propulsion systems as the first stage of a two-stage target vehicle. Two vehicle configurations were considered, both using the Clustered Lance Booster (CLB) as the first stage. On one configuration, the second stage will be the 40-inch diameter Liquid Fueled Target (LFT-40), which was the subject of an LTV Aerospace and Defense Company study in 1991. This configuration is designated as the CLB/LFT-40. The second stage of the other configuration will be a modified Lance having the same external shape as the Lance missile (22-inch diameter). This configuration is designated as the CLB/LFT-22.

  15. A feasibility study: Forest Fire Advanced System Technology (FFAST)

    NASA Technical Reports Server (NTRS)

    Mcleod, R. G.; Martin, T. Z.; Warren, J.

    1983-01-01

    The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development.

  16. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  17. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... which might affect the success of the enterprise. The report shall also identify and estimate project... include but not be limited to: (a) Economic feasibility. Information related to the project site... economic impact of the project. (b) Market feasibility. Information on the sales organization...

  18. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... which might affect the success of the enterprise. The report shall also identify and estimate project... include but not be limited to: (a) Economic feasibility. Information related to the project site... economic impact of the project. (b) Market feasibility. Information on the sales organization...

  19. 7 CFR 1737.70 - Description of feasibility study

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2010-01-01 2010-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a)...

  20. 7 CFR 1737.70 - Description of feasibility study

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... information supplied with the completed loan applications (see 7 CFR 1737.21 and 1737.22). (h) When, in RUS's... 7 Agriculture 11 2011-01-01 2011-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a)...

  1. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Scheduling feasibility... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  2. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true Scheduling feasibility... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  3. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false Scheduling feasibility... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  4. Dual-Mission Large Aircraft Feasibility Study and Aerodynamic Investigation

    NASA Technical Reports Server (NTRS)

    Mavris, Dimitri

    1997-01-01

    A Dual-Mission Large Aircraft, or DMLA, represents the possibility of a single aircraft capable of fulfilling both a Global Reach Aircraft (GRA) and Very Large Transport (VLT) roles. The DMLA, by combining the GRA and VLT into a single new aircraft, could possibly lower the aircraft manufacturer's production costs through the resulting increase in production quantity. This translates into lower aircraft acquisition costs, a primary concern for both the Air Force and commercial airlines. This report outlines the first steps taken in this study, namely the assessment of technical and economic feasibility of the DMLA concept. In the course of this project, specialized GRA and VLT aircraft were sized for their respective missions, using baseline conventional (i.e., lacking advanced enabling technologies) aircraft models from previous work for the Air Force's Wright Laboratory and NASA-Langley. DMLA baseline aircraft were then also developed, by first sizing the aircraft for the more critical of the two missions and then analyzing the aircraft's performance over the other mission. The resulting aircraft performance values were then compared to assess technical feasibility. Finally, the life-cycle costs of each aircraft (GRA, VLT, and DMLA) were analyzed to quantify economic feasibility. These steps were applied to both a two-engine aircraft set, and a four-engine aircraft set.

  5. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    SciTech Connect

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  6. Feasibility study for long lifetime helium dewar

    NASA Technical Reports Server (NTRS)

    Parmley, R. T.

    1981-01-01

    A feasible concept for a launchable three year lifetime helium dewar was investigted. Current helium dewar designs were examined to see where the largest potential reductions in parasitic heat loads can be made. The study was also devoted to examining support concepts. The support concept chosen, a passive orbital disconnect strut (PODS), has an orbital support conductance that is lower by more than an order of magnitude over current tension band supports. This lower support conductance cuts the total dewar weight in half for the same three year life time requirements. Effort was also concentrated on efficient wire feed through designs and vapor cooling of the multilayer insulation, supports, wire feed throughs and plumbing penetrations. A single stage helium dewar vs. dual stage dewars with a guard cryogen of nitrogen or neon was examined. The single stage dewar concept was selected. Different support concepts were analyzed from which the PODS support concepts was chosen. A preliminary design of the dewar was thermally and structurally analyzed and laid out including system weights, thermal performance and performance sensitivities.

  7. Economic feasibility study for phosphorus recovery processes.

    PubMed

    Molinos-Senante, María; Hernández-Sancho, Francesc; Sala-Garrido, Ramón; Garrido-Baserba, Manel

    2011-06-01

    Phosphorus recovery from wastewater has become a necessity for sustainable development because phosphorus is a non-renewable essential resource, and its discharge into the environment causes serious negative impacts. There are no economic incentives for the implementation of phosphorus recovery technologies because the selling price of rock phosphate is lower than phosphorus recovered from sewage. The methodologies used to determine the feasibility of such projects are usually focused on internal costs without considering environmental externalities. This article shows a methodology to assess the economic feasibility of wastewater phosphorus recovery projects that takes into account internal and external impacts. The shadow price of phosphorus is estimated using the directional distance function to measure the environmental benefits obtained by preventing the discharge of phosphorus into the environment. The economic feasibility analysis taking into account the environmental benefits shows that the phosphorus recovery is viable not only from sustainable development but also from an economic point of view. PMID:21809783

  8. Ultrasonic flow imaging system: A feasibility study

    SciTech Connect

    Sheen, S.H.; Lawrence, W.P.; Chien, H.T.; Raptis, A.C.

    1991-09-01

    This report examines the feasibility and potential problems in developing a real-time ultrasonic flow imaging instrument for on-line monitoring of mixed-phased flows such as coal slurries. State-of-the-art ultrasonic imaging techniques are assessed for this application. Reflection and diffraction tomographies are proposed for further development, including image-reconstruction algorithms and parallel processing systems. A conventional ultrasonic C-scan technique is used to demonstrate the feasibility of imaging the particle motion in a solid/water flow. 13 refs., 11 figs.

  9. Ionic alkali halide XUV laser feasibility study

    SciTech Connect

    Yang, T.T.; Gylys, V.T.; Bower, R.D.; Harris, D.G.; Blauer, J.A.; Turner, C.E.; Hindy, R.N.

    1989-11-10

    The objective of this work is to assess the feasibility of a select set of ionic alkali halide XUV laser concepts by obtaining the relevant kinetic and spectroscopic parameters required for a proof-of-principle and conceptual design. The proposed lasers operate in the 80--200 nm spectral region and do not require input from outside radiation sources for their operation. Frequency up-conversion and frequency mixing techniques and therefore not considered in the work to be described. An experimental and theoretical study of a new type of laser operating in the extreme ultraviolet wavelength region has been conducted. The lasing species are singly ionized alkali halide molecules such as Rb{sup 2+}F{sub {minus}}, Rb{sup 2+}Br{sup {minus}} and Cs{sup 2+}F{sup {minus}}. These species are similar in electronic structure to the rare gas halide excimers, such as XeF and Krf, except that the ionic molecules emit at wavelengths of 80--200 nm, much shorter than the conventional rare-gas halide excimer laser. The radiative lifetime of these molecules are typically near 1 ns, which is about an order of magnitude shorter than that for rare-gas halide systems. The values of the cross section for stimulated emission are on the order of 1 {times} 10{sup {minus}16}cm{sup 2}. Because of the fundamental similarity to existing UV lasers, these systems show promise as a high power, efficient XUV lasers. 55 refs., 50 figs., 5 tabs.

  10. Feasibility study of silicon nitride regenerators

    NASA Technical Reports Server (NTRS)

    Fucinari, C. A.; Rao, V. D. N.

    1979-01-01

    The feasibility of silicon nitride as a regenerator matrix material for applications requiring inlet temperatures above 1000 C is examined. The present generation oxide ceramics are used as a reference to examine silicon nitride from a material characteristics, manufacturing, thermal stress and aerothermodynamic viewpoint.

  11. X-connectors for tubing - Feasibility study

    NASA Technical Reports Server (NTRS)

    Bragg, K.; Fuhrmann, H. W.

    1970-01-01

    Connector tests, including 70 deg F leakage and vibration, proof pressure, burst pressure, tensility, thermal shock, high and low temperature leakage, and simultaneous high temperature vibration and leakage, prove feasibility of lightweight 0.5-in. X-connectors for 4500-lb/sq in. service pressures.

  12. Implementation phase of a multicentre prehospital telemedicine system to support paramedics: feasibility and possible limitations

    PubMed Central

    2013-01-01

    Background Legal regulations often limit the medical care that paramedics can provide. Telemedical solutions could overcome these limitations by remotely providing expert support. Therefore, a mobile telemedicine system to support paramedics was developed. During the implementation phase of this system in four German emergency medical services (EMS), the feasibility and possible limitations of this system were evaluated. Methods After obtaining ethical approval and providing a structured training program for all medical professionals, the system was implemented on three paramedic-staffed ambulances on August 1st, 2012. Two more ambulances were included subsequently during this month. The paramedics could initiate a consultation with EMS physicians at a teleconsultation centre. Telemedical functionalities included audio communication, real-time vital data transmission, 12-lead electrocardiogram, picture transmission on demand, and video streaming from a camera embedded into the ceiling of each ambulance. After each consultation, telephone-based debriefings were conducted. Data were retrieved from the documentation protocols of the teleconsultation centre and the EMS. Results During a one month period, teleconsultations were conducted during 35 (11.8%) of 296 emergency missions with a mean duration of 24.9 min (SD 12.5). Trauma, acute coronary syndromes, and circulatory emergencies represented 20 (57%) of the consultation cases. Diagnostic support was provided in 34 (97%) cases, and the administration of 50 individual medications, including opioids, was delegated by the teleconsultation centre to the paramedics in 21 (60%) missions (range: 1–7 per mission). No medical complications or negative interpersonal effects were reported. All applications functioned as expected except in one case in which the connection failed due to the lack of a viable mobile network. Conclusion The feasibility of the telemedical approach was demonstrated. Teleconsultation enabled early

  13. B Plant process piping replacement feasibility study

    SciTech Connect

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  14. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  15. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... studies. 101-5.104-4 Section 101-5.104-4 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and...

  16. Direct solar pumping of semiconductor lasers: A feasibility study

    NASA Technical Reports Server (NTRS)

    Anderson, Neal G.

    1991-01-01

    The primary goals of the feasibility study are the following: (1) to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space directly focused sunlight; and (2) to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or battery electrically pumping a current injection laser. With external modulation, such lasers may prove to be efficient sources for intersatellite communications. We proposed to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation for operation at low pump intensities. This report outlines our progress toward these goals. Discussion of several technical details are left to the attached summary abstract.

  17. Feasibility Study of Thin Film Thermocouple Piles

    NASA Technical Reports Server (NTRS)

    Sisk, R. C.

    2001-01-01

    Historically, thermopile detectors, generators, and refrigerators based on bulk materials have been used to measure temperature, generate power for spacecraft, and cool sensors for scientific investigations. New potential uses of small, low-power, thin film thermopiles are in the area of microelectromechanical systems since power requirements decrease as electrical and mechanical machines shrink in size. In this research activity, thin film thermopile devices are fabricated utilizing radio frequency sputter coating and photoresist lift-off techniques. Electrical characterizations are performed on two designs in order to investigate the feasibility of generating small amounts of power, utilizing any available waste heat as the energy source.

  18. F-8 oblique wing structural feasibility study

    NASA Technical Reports Server (NTRS)

    Koltko, E.; Katz, A.; Bell, M. A.; Smith, W. D.; Lauridia, R.; Overstreet, C. T.; Klapprott, C.; Orr, T. F.; Jobe, C. L.; Wyatt, F. G.

    1975-01-01

    The feasibility of fitting a rotating oblique wing on an F-8 aircraft to produce a full scale manned prototype capable of operating in the transonic and supersonic speed range was investigated. The strength, aeroelasticity, and fatigue life of such a prototype are analyzed. Concepts are developed for a new wing, a pivot, a skewing mechanism, control systems that operate through the pivot, and a wing support assembly that attaches in the F-8 wing cavity. The modification of the two-place NTF-8A aircraft to the oblique wing configuration is discussed.

  19. Feasibility Study & Design of Brightfield Solar Farm

    SciTech Connect

    Law, Susan

    2014-09-28

    This Congressionally Directed Project originally provided funds to the Township of Lower Providence, Pennsylvania for the purpose of investigating the potential for a renewable energy generation facility to make beneficial reuse of a closed landfill located within the Township, known as Moyer Landfill. Early in the course of the project, it was determined through collaboration and discussion with DOE to alter the scope of the project to include a feasibility assessment of a landfill solar project, as well as to construct a demonstration solar project at the municipal facilities to provide an educational and community outreach opportunity for the Township to offer regarding solar photovoltaic (“PV”) electricity generation.

  20. Feasibility Study for an Asymmetric B Factory Based on PEP

    SciTech Connect

    Chattapadhyay, A.; Hitlin, D.; Porter, F.; Chin, Y.H.; Dell'Orco, D.; Forest, E.; Furman, M.; Garren, A.A.; Hoyer, E.; Kennedy, K.; Lambertson, G.; Lo, C.C.; Nishimura, H.; Oddone, P.; Ronan, M.; Sessler, A.; Taylor, B.; Taylor, C.; Zisman, M.; Barletta, W.; Allen, M.; Bloom, E.; Burke, D.; Cornacchia, M.; Davies-White, D.; Destaebler, H.; Donald, M.H.; Dorfan, J.; Feldman, G.; Rees, J.; Schsarz, H.; Sullivan, M.; Autin, B.; Tennyson, J.; Barbson, B.; Oide, K.

    1989-10-26

    This report addresses the feasibility of designing and constructing an asymmetric B-factory based on the PEP storage ring at SLAC that can ultimately reach a luminosity of 1 X 10{sup 34} cm{sup -2}s{sup -1}. Such a facility, operating at the {gamma}(4S) resonance, could be used to study mixing, rate decays, and CP violation in the B{bar B} system, and could also study tau and charm physics. The essential accelerator physics, engineering, and technology issues that must be addressed to successfully build this exciting and challenging facility are identified, and possible solutions, or R and D that will reasonable lead to such solutions, are described.

  1. Feasibility study for a secondary Na/S battery

    NASA Technical Reports Server (NTRS)

    Abraham, K. M.; Schiff, R.; Brummer, S. B.

    1979-01-01

    The feasibility of a moderate temperature Na battery was studied. This battery is to operate at a temperature in the range of 100-150 C. Two kinds of cathode were investigated: (1) a soluble S cathode consisting of a solution of Na2Sn in an organic solvent and (2) an insoluble S cathode consisting of a transition metal dichalcogenide in contact with a Na(+)ion conducting electrolyte. Four amide solvents, dimethyl acetamide, diethyl acetamide, N-methyl acetamide and acetamide, were investigated as possible solvents for the soluble S cathode. Results of stability and electrochemical studies using these solvents are presented. The dialkyl substituted amides were found to be superior. Although the alcohol 1,3-cyclohexanediol was found to be stable in the presence of Na2Sn at 130 C, its Na2Sn solutions did not appear to have suitable electrochemical properties.

  2. Feasibility Studies on Si-Based Biosensors

    PubMed Central

    Libertino, Sebania; Aiello, Venera; Scandurra, Antonino; Renis, Marcella; Sinatra, Fulvia; Lombardo, Salvatore

    2009-01-01

    The aim of this paper is to summarize the efforts carried out so far in the fabrication of Si-based biosensors by a team of researchers in Catania, Italy. This work was born as a collaboration between the Catania section of the Microelectronic and Microsystem Institute (IMM) of the CNR, the Surfaces and Interfaces laboratory (SUPERLAB) of the Consorzio Catania Ricerche and two departments at the University of Catania: the Biomedical Science and the Biological Chemistry and Molecular Biology Departments. The first goal of our study was the definition and optimization of an immobilization protocol capable of bonding the biological sensing element on a Si-based surface via covalent chemical bonds. We chose SiO2 as the anchoring surface due to its biocompatibility and extensive presence in microelectronic devices. The immobilization protocol was tested and optimized, introducing a new step, oxide activation, using techniques compatible with microelectronic processing. The importance of the added step is described by the experimental results. We also tested different biological molecule concentrations in the immobilization solutions and the effects on the immobilized layer. Finally a MOS-like structure was designed and fabricated to test an electrical transduction mechanism. The results obtained so far and the possible evolution of the research field are described in this review paper. PMID:22412322

  3. A Performance Measurement Feasibility Study: Implications for Manpower Policy.

    ERIC Educational Resources Information Center

    Schmidt, Frank L.; And Others

    Utilizing eight apprentices in the mentals trades, this study empirically evaluated a number of techniques designed to produce performance tests that are economically feasible, reliable, content-valid, and less disadvantageous to minority group members than paper-and-pencil measures. The final test was economically feasible, reliable with respect…

  4. Direct solar pumping of semiconductor lasers: A feasibility study

    NASA Technical Reports Server (NTRS)

    Anderson, Neal G.

    1992-01-01

    This report describes results of NASA Grant NAG-1-1148, entitled Direct Solar Pumping of Semiconductor Lasers: A Feasibility Study. The goals of this study were to provide a preliminary assessment of the feasibility of pumping semiconductor lasers in space with directly focused sunlight and to identify semiconductor laser structures expected to operate at the lowest possible focusing intensities. It should be emphasized that the structures under consideration would provide direct optical-to-optical conversion of sunlight into laser light in a single crystal, in contrast to a configuration consisting of a solar cell or storage battery electrically pumping a current injection laser. With external modulation, such lasers could perhaps be efficient sources for intersatellite communications. We proposed specifically to develop a theoretical model of semiconductor quantum-well lasers photopumped by a broadband source, test it against existing experimental data where possible, and apply it to estimating solar pumping requirements and identifying optimum structures for operation at low pump intensities. These tasks have been accomplished, as described in this report of our completed project. The report is organized as follows: Some general considerations relevant to the solar-pumped semiconductor laser problem are discussed in Section 2, and the types of structures chosen for specific investigation are described. The details of the laser model we developed for this work are then outlined in Section 3. In Section 4, results of our study are presented, including designs for optimum lattice-matched and strained-layer solar-pumped quantum-well lasers and threshold pumping estimates for these structures. It was hoped at the outset of this work that structures could be identified which could be expected to operate continuously at solar photoexcitation intensities of several thousand suns, and this indeed turned out to be the case as described in this section. Our project is

  5. Anticipatory precrash restraint sensor feasibility study: Final report

    SciTech Connect

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  6. Feasibility study of an active target for the MEG experiment

    NASA Astrophysics Data System (ADS)

    Papa, A.; Cavoto, G.; Ripiccini, E.

    2014-03-01

    We consider the possibility to have an active target for the upgrade of the MEG experiment (MEG II). The active target should work as (1) a beam monitoring, to continuously measure the muon stopping rate and therefore provide a direct evaluation of the detector acceptance (or an absolute normalization of the stopped muon); and as (2) an auxiliary device for the spectrometer, to improve the determination of the muon decay vertex and consequently to achieve a better positron momentum and angular resolutions, detecting the positron from the muon decay. In this work we studied the feasibility of detecting minimum ionizing particle with a single layer of 250 μm fiber and the capability to discriminate between the signal induced by either a muon or a positron.

  7. Feasibility study of a superconducting motor for electrical helicopter propulsion

    NASA Astrophysics Data System (ADS)

    Simons, C. A. B. A. E.; Sanabria-Walter, C.; Polinder, H.

    2014-05-01

    During the past decades, superconducting electrical machines have become more suitable to replace conventional iron based designs, because of their lower weight and higher torque density. These properties make them good candidates for use in More Electric Aircraft (MEA). Especially helicopter propulsion systems could benefit from the increased performance. This paper describes the feasibility study of a superconducting motor to be used for helicopter propulsion as part of a More Electric Aircraft (MEA). For this, the armature, field windings and cryostat are designed, aiming at meeting the difficult specifications. Since superconductors have virtually no electrical resistance when cooled down below a certain critical temperature, they can be used to build high field and low weight coils for electrical machines. Especially the possibility to not use iron can make the superconducting motor lighter with a higher power density compared with conventional Permanent Magnet (PM) motors.

  8. Solid waste electrical generating feasibility study

    SciTech Connect

    Not Available

    1982-05-01

    The feasibility of recommissioning the existing 3 megawatt steam turbine driven electrical generator of the Municipal Utilities of Valley City, North Dakota, using steam generated in a new facility from the incineration of municipal solid waste generated in the area is examined. It is concluded that (1) there is sufficient municipal solid waste that can be obtained from Valley City, Moorhead and Jamestown (and/or West Fargo) to fuel the plant; (2) the seasonal fluctuation in the amounts of municipal solid waste indicates that a supplementary source of fuel for use during winter would increase plant efficiency; (3) the probable capital cost of the project will be $3,590,000.00; (4) the cost of production of electricity could range from 3.72 cents/kWh to 4.90 cents/kWh, depending on the construction costs, interest rate, lifetime of the project, availability for the plant and steam produced per ton of municipal solid waste; (5) there is no compelling reason why the tertiary cell of the sewage lagoon, cannot be used for cooling water; (6) the State Health Department is ambivalent toward the project; and (7) the public perception of the project is positive. 92 references.

  9. STS propellant densification feasibility study data book

    NASA Technical Reports Server (NTRS)

    Fazah, M. M.

    1994-01-01

    The feasibility of using densification or subcooling with respect to standard temperature propellants on the Space Transportation System (STS) in order to achieve a payload gain is discussed in this report. The objective is to determine the magnitude of the payload gain and to identify any system impacts to the space shuttle on either flight systems or ground systems. Results show that a payload benefit can be obtained by subcooling the liquid hydrogen (LH2) from a nominal temperature of 36.4 R to 28.5 R and by subcooling the liquid oxygen (LO2) from a nominal temperature of 164 R to either 132.1 R or 141.4 R. When the propellants are subcooled to 28.5 R and 132.1 R for the LH2 and LO2, respectively, a maximum payload gain of 7,324 lb can be achieved, and when the propellants are subcooled to 28.5 R and 141.5 R for the LH2 and LO2, respectively, a maximum payload gain of 6,841 lb can be achieved. If the LH2 is subcooled to 28.5 R while the LH2 and LO2 remains at the nominal conditions, a maximum payload gain of 1,303 lb can be achieved.

  10. Feasibility study of the AOSTA experimental campaign

    NASA Astrophysics Data System (ADS)

    Carta, M.; Blaise, P.; Bethaz, C.; Boccia, F.; Fabrizio, V.; Geslot, B.; Grossi, A.; Gruel, A.

    2016-03-01

    The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs) such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO) experimental campaign is provided.

  11. Co-combustion feasibility study. Final report

    SciTech Connect

    Handcock, D.J.

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  12. Washoe Tribe Alternative Energy Feasibility Study Final Report

    SciTech Connect

    Johnson, Jennifer

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  13. Optically exciting a magnetic memory - A feasibility study

    NASA Technical Reports Server (NTRS)

    Grismore, F. L.; Rhodes, J. E.

    1969-01-01

    Rare earth iron garnets were used in experiments to determine the feasibility of optically pumping a magnetic material to effect the switching process. It was found that rare earth garnets are limited by an absorption edge, only terbium and dysprosium offer a possibility of pumping at energies below the conduction band edge.

  14. FEASIBILITY STUDY ON EXECUTIVE PROGRAM DEVELOPMENT FOR BASIN ECOSYSTEMS MODELING

    EPA Science Inventory

    The project was undertaken in order to provide a feasibility study in developing and implementing a complete executive program to interface automatically various basin-wide water quality models for use by relatively inexperienced modelers. This executive program should ultimately...

  15. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    SciTech Connect

    Daryl Williams; Ray Clark

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  16. Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study

    SciTech Connect

    Rapp, Jim; Knight, Tawnie

    2014-01-30

    Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

  17. Sol Duc Hot Springs feasibility study

    SciTech Connect

    Not Available

    1981-12-01

    Sol Duc Springs is located in the Olympic National Park in western Washington state. Since the turn of the century, the area has served as a resort, offering hot mineral baths, lodge and overnight cabin accommodations. The Park Service, in conjunction with the concessionaire, is in the process of renovating the existing facilities, most of which are approximately 50 years old. The present renovation work consists of removing all of the existing cabins and replacing them with 36 new units. In addition, a new hot pool is planned to replace the existing one. This report explores the possibility of a more efficient use of the geothermal resource to accompany other planned improvements. It is important to note that the system outlined is based upon the resource development as it exists currently. That is, the geothermal source is considered to be: the two existing wells and the hot springs currently in use. In addition, every effort has been made to accommodate the priorities for utilization as set forth by the Park Service.

  18. BNL feasibility studies of spallation neutron sources

    SciTech Connect

    Lee, Y.Y.; Ruggiero, A.G.; Van Steenbergen, A.; Weng, W.T.

    1995-12-01

    This paper is the summary of conceptual design studies of a 5 MW Pulsed Spallation Neutron Source (PSNS) conducted by an interdepartmental study group at Brookhaven National Laboratory. The study was made of two periods. First, a scenario based on the use of a 600 MeV Linac followed by two fast-cycling 3.6 GeV Synchrotrons was investigated. Then, in a subsequent period, the attention of the study was directed toward an Accumulator scenario with two options: (1) a 1.25 GeV normal conducting Linac followed by two Accumulator Rings, and (2) a 2.4 GeV superconducting Linac followed by a single Accumulator Ring. The study did not make any reference to a specific site.

  19. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

    SciTech Connect

    King, J.W.

    1993-08-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

  20. Wind Generation Feasibility Study in Bethel, AK

    SciTech Connect

    Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

    2004-07-31

    This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

  1. Remedial investigation/feasibility study badger army ammunition plant Baraboo, Wisconsin. Volume 2. Feasibility study report

    SciTech Connect

    1994-08-01

    This Feasibility Study (FS) report for the Badger Army Ammunition Plant (BAAP) in Baraboo, Wisconsin, was prepared by ABB Environmental Services, Inc. (ABB-ES) as a component of Task Order 1 of Contract DAAAl5-91-D-OOO8 with the U.S. Army Environmental Center (USAEC). This report uses the results presented in the Final Remedial Investigation (RI) report (ABB-ES, 1993a) to develop and screen alternatives for remediation of contaminated media at BAAP. The purpose of this FS report is to develop, screen, and evaluate site-specific remedial alternatives to mitigate the impact of site-derived chemicals and ultimately provide protection of human health and the environment. Preferred alternatives for each site are included in this report. Based on previous environmental studies at BAAP, 11 potential hazardous waste sites were ranked according to potential contributions of hazardous chemicals to the environment. These sites were designated as Waste Management Areas because some of the sites contain multiple Solid Waste Management Units (SWMUs). The sites selected to undergo facility assessment and corrective actions are: the Propellant Burning Ground (including Landfill), Deterrent Burning Ground, existing Landfill, Settling Ponds and Spoils Disposal Area, Rocket Paste Area, Oleum Plant and Oleum Plant Pond, Nitroglycerine Pond, old Acid Area, new Acid Area, and Ballistics Pond. The USAEC added an 11th site, the Old Fuel Oil Tank, to the list in October 1989 after discovery of fuel-contaminated soils during excavation of a water line in the vicinity of the old fuel oil tank foundation.

  2. Remedial investigation/feasibility study badger army ammunition plant Baraboo, Wisconsin. Volume 1. Feasibility study report

    SciTech Connect

    1994-08-01

    This Feasibility Study (FS) report for the Badger Army Ammunition Plant (BAAP) in Baraboo, Wisconsin, was prepared by ABB Environmental Services, Inc. (ABB-ES) as a component of Task Order 1 of Contract DAAAl5-91-D-OOO8 with the U.S. Army Environmental Center (USAEC). This report uses the results presented in the Final Remedial Investigation (RI) report (ABB-ES, 1993a) to develop and screen alternatives for remediation of contaminated media at BAAP. The purpose of this FS report is to develop, screen, and evaluate site-specific remedial alternatives to mitigate the impact of site-derived chemicals and ultimately provide protection of human health and the environment. Preferred alternatives for each site are included in this report. Based on previous environmental studies at BAAP, 11 potential hazardous waste sites were ranked according to potential contributions of hazardous chemicals to the environment. These sites were designated as Waste Management Areas because some of the sites contain multiple Solid Waste Management Units (SWMUs). The sites selected to undergo facility assessment and corrective actions are: the Propellant Burning Ground (including Landfill), Deterrent Burning Ground, existing Landfill, Settling Ponds and Spoils Disposal Area, Rocket Paste Area, Oleum Plant and Oleum Plant Pond, Nitroglycerine Pond, old Acid Area, new Acid Area, and Ballistics Pond. The USAEC added an 11th site, the Old Fuel Oil Tank, to the list in October 1989 after discovery of fuel-contaminated soils during excavation of a water line in the vicinity of the old fuel oil tank foundation.

  3. World Languages and Cultures Feasibility Study

    ERIC Educational Resources Information Center

    Sklarz, David P.

    2013-01-01

    The purpose of the study was to conduct a comprehensive review of the research and best practices of exemplary elementary school World Language and Culture Programs. Specifically, (1) to assess the degree to which various program designs had most closely met the measurable goals of the American Council of Teachers of a Foreign Language, commonly…

  4. 7 CFR 1980.442 - Feasibility studies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... as provided in this paragraph. The cost of the study will be borne by the borrower and may be paid... management, nature and extent of market area, marketing plans for sale of projected output, extent of... operating and development costs and specify the level of accuracy of these estimates and the assumptions...

  5. Laparoscopic Liver Resections: A Feasibility Study in 30 Patients

    PubMed Central

    Cherqui, Daniel; Husson, Emmanuel; Hammoud, Renaud; Malassagne, Benoît; Stéphan, François; Bensaid, Said; Rotman, Nelly; Fagniez, Pierre-Louis

    2000-01-01

    Objective To assess the feasibility and safety of laparoscopic liver resections. Summary Background Data The use of the laparoscopic approach for liver resections has remained limited for technical reasons. Progress in laparoscopic procedures and the development of dedicated technology have made it possible to consider laparoscopic resection in selected patients. Methods A prospective study of laparoscopic liver resections was undertaken in patients with preoperative diagnoses including benign lesion, hepatocellular carcinoma with compensated cirrhosis, and metastasis of noncolorectal origin. Hepatic involvement had to be limited and located in the left or peripheral right segments (segments 2–6), and the tumor had to be 5 cm or smaller. Surgical technique included CO2 pneumoperitoneum and liver transection with a harmonic scalpel, with or without portal triad clamping or hepatic vein control. Portal pedicles and large hepatic veins were stapled. Resected specimens were placed in a bag and removed through a separate incision, without fragmentation. Results From May 1996 to December 1999, 30 of 159 (19%) liver resections were included. There were 18 benign lesions and 12 malignant tumors, including 8 hepatocellular carcinomas in cirrhotic patients. Mean tumor size was 4.25 cm. There were two conversions to laparotomy (6.6%). The resections included 1 left hepatectomy, 8 bisegmentectomies (2 and 3), 9 segmentectomies, and 11 atypical resections. Mean blood loss was 300 mL. Mean surgical time was 214 minutes. There were no deaths. Complications occurred in six patients (20%). Only one cirrhotic patient developed postoperative ascites. No port-site metastases were observed in patients with malignant disease. Conclusion Laparoscopic resections are feasible and safe in selected patients with left-sided and right-peripheral lesions requiring limited resection. Young patients with benign disease clearly benefit from avoiding a major abdominal incision, and cirrhotic

  6. Feasibility study of solid waste resource recovery

    SciTech Connect

    Not Available

    1989-04-01

    This report presents the findings of a study of solid waste management alternatives applicable to the Kettle Moraine Solid Waste Management District. The Kettle Moraine Solid Waste Management District (the District'') is an unofficial name referring to the group of Washington County communities located in the planning area considered in the study. Knowing that demand for ultimate disposal will never be completely eliminated, the communities' objective is to examine other methods such as source separation/recycling, composting and incineration which would balance their reliance among several means of management. Finding the best available system of methods is therefore the basic study objective. The attached report is presented in several sections. It provides a stand-alone overview of findings in the other seven sections as well as provide conclusions and recommendations, presents basic solid waste characterization data in volume and composition terms as would become the basis of planning, and introduces the basic building block methods considered in conceiving balanced system alternatives. It presents economic attributes of the alternatives: environmental and permitting requirements, criteria for evaluation of sites, and the where-to-go-from-here considerations of implementation. 11 figs., 18 tabs.

  7. Antibiotics Overprescribed for Possible STDs: Study

    MedlinePlus

    ... nlm.nih.gov/medlineplus/news/fullstory_159296.html Antibiotics Overprescribed for Possible STDs: Study 3 in 4 ... Three-quarters of emergency room patients who received antibiotics to treat suspected sexually transmitted diseases (STDs) tested ...

  8. Remote vehicle emissions sensing feasibility studies

    SciTech Connect

    Rendahl, C.S.

    1996-12-31

    Previous papers have addressed quality assurance efforts with regard to collecting data of known quality, data validation, and preliminary analysis of Wisconsin`s Remote Vehicle Emissions Sensing (RVES) project conducted in 1993 and 1994. This paper will analyze in greater detail the field data collected over the two years of studies. This analysis included making comparisons of mass emissions of total hydrocarbon emissions with respect to vehicle model year and total contribution to tropospheric ozone forming emissions in Southeastern Wisconsin. A simple analysis of errors of commission and errors of omission as a function of varying RVES cut points will be reviewed. And finally, potential emission reductions gained from the use of remote vehicle sensing will also be explored. 5 figs., 4 tabs.

  9. Feasibility study of EEW application in Korea

    NASA Astrophysics Data System (ADS)

    Chi, H.; Park, J.; Sheen, D.

    2008-12-01

    At present, it seems almost impossible to predict where and how much strong a earthquake will happen within very limited time such as two or three days before it occurs. However, the advantage of modern electronic techniques can support us very fast communication tools around nation-wide area so that we can receive P- waves arrival information from seismic stations through communication lines before S-waves strike our living site. This is the key of EEW(Earthquake Early Warning) concept that is under development around world especially including Japan, United State of America, and Taiwan. In this pilot study we proposed the direction for developing Korean Earthquake Early Warning System. Considering the state of the art techniques used in Japan, USA and Taiwan, ElarmS would be more adaptable to Korea since ElarmS can work from the low limit of moderate earthquakes around magnitude 3.5, which would annually happen in Korea. We investigate empirical magnitude scaling relationship for South Korea using 27 events ranging in magnitude from 2.2 to 4.9 recorded by the Korea Institute of Geoscience And Mineral Resources (KIGAM) and the Korea Meteorological Administration (KMA) for 2007. We measure the maximum predominant period and the peak displacement or velocity amplitude from the first 4 seconds of P wave arrivals to derive period-magnitude and amplitude-magnitude scaling relationship, respectively. For the period-magnitude relationship, we find that 10 Hz low-pass filter yields better estimate than 3 Hz. This is because the magnitudes of most events used in this study are too small (<3.0). It is also shown that peak displacement for velocity instruments and peak velocity for accelerometers have their own magnitude scaling relationships, respectively. Thus, for the amplitude-magnitude relationship, like the relationships in northern California, two individual amplitude scaling relationships would be necessary.

  10. Feasibility study on rapid thermal processing

    NASA Astrophysics Data System (ADS)

    Karle, S. C.; Shaligram, A. D.

    2009-09-01

    The rapid thermal processing is widely used for heating of substrates in microelectronics. The use of radiation (UV/Visible/IR) as source of energy provides several advantages. Apart from thermal effects, photonic effects play a significant role in the RTP. Using array of tungsten halogen lamps as a continuous source of radiation, RTP covers a wide range of processing steps such as annealing, dielectric fabrication, metal alloying, diffusion and chemical vapor deposition. This paper reports an attempt made to use RTP in the field of thick film processing. Firing of thick films is an important high temperature step. The desirable physical and chemical properties of the films can be obtained through firing. A paste consisting of active chemicals, solvent, binder, glass powder is transferred on the substrate by means of screen-printing techniques. Further heating the substrates to about 600 °C fires this patterned thick film. This paper reports a novel technique for firing the paste in RTP system. The parameters viz. temperature and time were optimized for resistive paste of Cd-Cu-Cl. The thick films thus obtained were studied for their photosensitivity, I- V characteristics and microscopic structures.

  11. Automated Plasma Spray (APS) process feasibility study

    NASA Technical Reports Server (NTRS)

    Fetheroff, C. W.; Derkacs, T.; Matay, I. M.

    1981-01-01

    An automated plasma spray (APS) process was developed to apply two layer (NiCrAlY and ZrO2-12Y2O3) thermal barrier coatings to aircraft and stationary gas turbine engine blade airfoils. The APS process hardware consists of four subsystems: a mechanical positioning subsystem incorporating two interlaced six degree of freedom assemblies (one for coating deposition and one for coating thickness monitoring); a noncoherent optical metrology subsystem (for in process gaging of the coating thickness buildup at specified points on the specimen); a microprocessor based adaptive system controller (to achieve the desired overall thickness profile on the specimen); and commerical plasma spray equipment. Over fifty JT9D first stage aircraft turbine blade specimens, ten W501B utility turbine blade specimens and dozens of cylindrical specimens were coated with the APS process in preliminary checkout and evaluation studies. The best of the preliminary turbine blade specimens achieved an overall coating thickness uniformity of 53 micrometers (2.1 mils), much better than is achievable manually. Comparative evaluations of coating thickness uniformity for manually sprayed and APS coated specimens were performed. One of the preliminary turbine blade evaluation specimens was subjected to a torch test and metallographic evaluation. Some cylindrical specimens coated with the APS process survived up to 2000 cycles in subsequent burner rig testing.

  12. CsIX/TRU Grout Feasibility Study

    SciTech Connect

    S. J. Losinski; C. M. Barnes; B. K. Grover

    1998-11-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be from January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP.

  13. A feasibility study of orbiter flight control experiments

    NASA Technical Reports Server (NTRS)

    Geissler, W. H.

    1978-01-01

    The results of a feasibility study of orbiter flight control experiments performed are summarized. Feasibility studies were performed on a group of 14 experiments selected from a candidate list of 35 submitted to the study contractor by the flight control community. Concepts and requirements were developed for the 14 selected experiments and they were ranked on a basis of technical value, feasibility, and cost. It was concluded that all the selected experiments can be considered as potential candidates for the Orbiter Experiment program, which is being formulated for the Orbiter Flight Tests and subsequent operational flights, regardless of the relative ranking established during the study. None of the selected experiments has significant safety implications and the cost of most was estimated to be less than $200K.

  14. [Cambridge Conference on School Mathematics Feasibility Studies 9-13.

    ERIC Educational Resources Information Center

    Cambridge Conference on School Mathematics, Newton, MA.

    These materials are a part of a series of studies sponsored by the Cambridge Conference on School Mathematics which reflects the ideas of CCSM regarding the goals and objectives for school mathematics K-12. Feasibility Studies 9-13 contain a wide range of topics. The following are the titles and brief descriptions of these studies. Number…

  15. Structural design feasibility study of Space Station long spacer truss

    NASA Technical Reports Server (NTRS)

    Armand, Sasan C.; Funk, Gregory P.; Dohogne, Caroline A.

    1994-01-01

    The structural design and configuration feasibility of the long spacer truss assembly that will be used as part of the Space Station Freedom is the focus of this study. The structural analysis discussed herein is derived from the transient loading events presented in the Space Transportation System Interface Control Document (STS ICD). The transient loading events are liftoff, landing, and emergency landing loads. Quasi-static loading events were neglected in this study since the magnitude of the quasi-static acceleration factors is lower than that of the transient acceleration factors. Structural analysis of the proposed configuration of the long spacer truss with four longerons indicated that negative safety margins are possible. As a result, configuration changes were proposed. The primary configuration change suggested was to increase the number of truss longerons to six. The six-longeron truss appears to be a more promising structure than the four-longeron truss because it offers a positive margin of safety and more volume in its second bay (BAY2). This additional volume can be used for resupply of some of the orbital replacement units (such as a battery box). Note that the design effort on the long spacer truss has not fully begun and that calculations and reports of the negative safety margins are, to date, based on concept only.

  16. Structural design feasibility study of Space Station long spacer truss

    NASA Astrophysics Data System (ADS)

    Armand, Sasan C.; Funk, Gregory P.; Dohogne, Caroline A.

    1994-02-01

    The structural design and configuration feasibility of the long spacer truss assembly that will be used as part of the Space Station Freedom is the focus of this study. The structural analysis discussed herein is derived from the transient loading events presented in the Space Transportation System Interface Control Document (STS ICD). The transient loading events are liftoff, landing, and emergency landing loads. Quasi-static loading events were neglected in this study since the magnitude of the quasi-static acceleration factors is lower than that of the transient acceleration factors. Structural analysis of the proposed configuration of the long spacer truss with four longerons indicated that negative safety margins are possible. As a result, configuration changes were proposed. The primary configuration change suggested was to increase the number of truss longerons to six. The six-longeron truss appears to be a more promising structure than the four-longeron truss because it offers a positive margin of safety and more volume in its second bay (BAY2). This additional volume can be used for resupply of some of the orbital replacement units (such as a battery box). Note that the design effort on the long spacer truss has not fully begun and that calculations and reports of the negative safety margins are, to date, based on concept only.

  17. 3D image guidance in radiotherapy: a feasibility study

    NASA Astrophysics Data System (ADS)

    Ebert, Matthias; Groh, Burkhard A.; Partridge, Mike; Hesse, Bernd M.; Bortfeld, Thomas

    2001-07-01

    Currently, one major research field in radiotheraphy is focused on patient setup verification and on detection of organ motion and deformation. A phantom study is performed to demonstrate the feasibility of image guidance in radiotherapy. Patient setup errors are simulated with a humanoid phantom, which is imaged using a linear accelerator and a therapy simulator to address megavoltage and kilovoltage (kV) computed tomography (CT), respectively. Projections are recorded by a flat panel imager. The various data sets of the humanoid phantom are compared by mutual information matching. The CT investigations show that the spatial resolution is better than 1.6 mm for high contrast objects. The uncertainties remaining after mutual information matching are found to be less than 1 mm for translations and 1 degree(s) for rotations. The phantom study indicates that the detection of patient setup errors as well as organ motion or deformation is possible with a high accuracy, especially if a kV X-ray tube could be attached to the linear accelerator. The presented method allows sophisticated quality assurance of beam delivery in each fraction and may even enable the use of new concepts of adaptive radiotherapy.

  18. Precipitation measurement using SIR-C: A feasibility study

    NASA Technical Reports Server (NTRS)

    Ahamad, Atiq; Moore, Richard K.

    1993-01-01

    A precipitation detection and measurement experiment is planned for the SIR-C/X-SAR mission. This study was conducted to determine under what conditions an off-nadir experiment is feasible. The signal-to-clutter ratio, the signal-to-noise ratio, and the minimum detectable rain rate were investigated. Available models, used in previous studies, were used for the surface clutter and the rain echo. The study also considers the attenuation of the returns at X band. It was concluded that an off-nadir rain-measurement experiment is feasible only for rain rates greater than 10 mm/hr for look angles greater than 60 deg. For the range of look angles 5 less than theta(sub 1) less than 50, the rain rate required is very high for adequate signal-to-clutter ratio, and hence the feasibility of the experiment.

  19. Solar pond power plant feasibility study for Davis, California

    NASA Technical Reports Server (NTRS)

    Wu, Y. C.; Singer, M. J.; Marsh, H. E.; Harris, J.; Walton, A. L.

    1982-01-01

    The feasibility of constructing a solar pond power plant at Davis, California was studied. Site visits, weather data compilation, soil and water analyses, conceptual system design and analyses, a material and equipment market survey, conceptual site layout, and a preliminary cost estimate were studied. It was concluded that a solar pond power plant is technically feasible, but economically unattractive. The relatively small scale of the proposed plant and the high cost of importing salt resulted in a disproportionately high capital investment with respect to the annual energy production capacity of the plant. Cycle optimization and increased plant size would increase the economical attractiveness of the proposed concept.

  20. Center for Advanced Technology Training (CATT) Feasibility Study.

    ERIC Educational Resources Information Center

    Albuquerque Technical Vocational Inst., NM.

    A study of the feasibility of establishing a Center for Advanced Technology Training (CATT) at the Albuquerque Technical Vocational Institute (TVI Community College, New Mexico) was conducted by members of the Albuquerque business community, government representatives, and college administrators. Phase 1 of the study was an examination of the…

  1. Feasibility study ASCS remote sensing/compliance determination system

    NASA Technical Reports Server (NTRS)

    Duggan, I. E.; Minter, T. C., Jr.; Moore, B. H.; Nosworthy, C. T.

    1973-01-01

    A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

  2. Phase II Feasibility Study to Gather Information for Implementing Telecommunications into Office Technology Curriculum. Final Report.

    ERIC Educational Resources Information Center

    Henson, Linda; Sanders, Myrna

    Phase II of a feasibility study to gather information for implementing telecommunications into the office systems and technologies curriculum at Jefferson College began in January 1984. The objectives were to provide the instructional staff with the technical information needed to teach telecommunications and to explore the possibility of…

  3. 75 FR 77897 - Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental Impact...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-14

    ... National Park Service Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental... National Historic Trail Feasibility Study. SUMMARY: Pursuant to the National Environmental Policy Act of... Abbreviated Final Environmental Impact Statement for the Long Walk National Historic Trail Feasibility...

  4. Feasibility study of full-reactor gas core demonstration test

    NASA Technical Reports Server (NTRS)

    Kunze, J. F.; Lofthouse, J. H.; Shaffer, C. J.; Macbeth, P. J.

    1973-01-01

    Separate studies of nuclear criticality, flow patterns, and thermodynamics for the gas core reactor concept have all given positive indications of its feasibility. However, before serious design for a full scale gas core application can be made, feasibility must be shown for operation with full interaction of the nuclear, thermal, and hydraulic effects. A minimum sized, and hence minimum expense, test arrangement is considered for a full gas core configuration. It is shown that the hydrogen coolant scattering effects dominate the nuclear considerations at elevated temperatures. A cavity diameter of somewhat larger than 4 ft (122 cm) will be needed if temperatures high enough to vaporize uranium are to be achieved.

  5. Feasibility study of liquid pool burning in reduced gravity

    NASA Technical Reports Server (NTRS)

    Kanury, A. M.

    1979-01-01

    The feasibility of conducting experiments in the Spacelab on ignition and flame spread with liquid fuel pools which are initially at a temperature lower than the fuel's flash point temperature was studied. Theories were developed for the ignition and flame spread processes, and experiments were conducted to understand the factors influencing the ignition process and the spread rate. The results were employed to devise a conceptual Spacelab experiment which is expected to be feasible for a safe conduct and to be suitable for obtaining crucial data on the concerned processes.

  6. A feasibility study of a hypersonic real-gas facility

    NASA Technical Reports Server (NTRS)

    Gully, J. H.; Driga, M. D.; Weldon, W. F.

    1987-01-01

    A four month feasibility study of a hypersonic real-gas free flight test facility for NASA Langley Research Center (LARC) was performed. The feasibility of using a high-energy electromagnetic launcher (EML) to accelerate complex models (lifting and nonlifting) in the hypersonic, real-gas facility was examined. Issues addressed include: design and performance of the accelerator; design and performance of the power supply; design and operation of the sabot and payload during acceleration and separation; effects of high current, magnetic fields, temperature, and stress on the sabot and payload; and survivability of payload instrumentation during acceleration, flight, and soft catch.

  7. Shared materials management and warehousing: a feasibility study.

    PubMed

    Kowalski, J C; Dickow, J F

    1985-06-01

    In response to significant changes in the political, competitive, and economic environment of Massachusetts, five independent hospitals sought ways to strengthen their capabilities to deal with these new challenges through collaboration. These hospitals, located in suburban Boston, prepared and submitted a proposal to the Blue Cross/Massachusetts Hospital Association Fund for Cooperative Innovation, requesting participative funding to conduct a "Shared Materials Management and Warehousing Feasibility Study". The objective was to determine the feasibility of several independent hospitals, operating in the same geographic area, sharing materials management and related functions. The hospitals were: Framingham Union, Glover Memorial, Leonard Morse, Newton-Wellesley, and Marlborough. PMID:10272277

  8. A Feasibility Study of Youth Apprenticeship in Arkansas.

    ERIC Educational Resources Information Center

    Jobs for the Future, Inc., West Somerville, MA.

    A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

  9. Feasibility Study of the Social Enterprise Intervention with Homeless Youth

    ERIC Educational Resources Information Center

    Ferguson, Kristin M.; Xie, Bin

    2008-01-01

    Objective: To reduce mental health symptoms and high-risk behaviors and increase social support and service utilization among street-living youth, the authors conducted a pilot study to assess the feasibility of the social enterprise intervention (SEI) at a homeless youth agency. Method: Convenience sampling was used to recruit 16 street-living…

  10. Embedding Resilience within the Tertiary Curriculum: A Feasibility Study

    ERIC Educational Resources Information Center

    Stallman, Helen M.

    2011-01-01

    Mental health problems can significantly impact on the ability of university students to both meet their individual potential and contribute positively within society. This study evaluates the feasibility of embedding a strength-focused resilience-building seminar within a university curriculum. Participants were 247 students enrolled in an…

  11. RESISTANCE EXERCISE IN MAINTENANCE DIALYSIS-FEASIBILITY STUDY

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Resistance exercise has been shown to counteract muscle wasting and inflammation in chronic kidney disease, but its benefits have not been tested in patients with kidney failure treated by maintenance hemodialysis. Prior to beginning a randomized controlled trial, we conducted a feasibility study to...

  12. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... other local or State programs to assist in the construction or operation of the facility. These programs... applicant has identified local programs, 5 points will be awarded. (2) If the applicant has identified...

  13. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... other local or State programs to assist in the construction or operation of the facility. These programs... applicant has identified local programs, 5 points will be awarded. (2) If the applicant has identified...

  14. 7 CFR 4280.178 - Scoring feasibility study grant applications.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.178 Scoring... other local or State programs to assist in the construction or operation of the facility. These programs... applicant has identified local programs, 5 points will be awarded. (2) If the applicant has identified...

  15. Improving Children's Formal Word Definitions: A Feasibility Study

    ERIC Educational Resources Information Center

    Marinellie, Sally A.

    2010-01-01

    The ability to define a word with accuracy and precision is an important skill that has been associated with academic achievement. This study investigated the feasibility of conducting a lesson on formal word definitions to improve children's definitional production. The participants were 18 children in grade 4 (mean age: 9 years; 8 months) who…

  16. The Army Collegiate Commissioning Program--A Feasibility Study.

    ERIC Educational Resources Information Center

    Tucker, P. E.

    This study examined the feasibility of a U.S. Army collegiate commissioning program (CCP) as a supplemental method of officer procurement. Investigated were the U.S. undergraduate population, Army procurement goals, program production capabilities, costs, and retention rates projected through fiscal year 1982. A sufficient college population will…

  17. Small modular biopower initiative Phase 1 feasibility studies executive summaries

    SciTech Connect

    Bain, R.

    2000-03-06

    The Phase 1 objective is a feasibility study that includes a market assessment, resource assessment, preliminary system design, and assessment of relevant environmental and safety considerations, and evaluation of financial and cost issues, and a preliminary business plan and commercialization strategy. Each participating company will share at least 20% of the cost of the first phase.

  18. THE COMMUNITY-APPRENTICESHIP PROGRAM, A FEASIBILITY STUDY.

    ERIC Educational Resources Information Center

    ISAACK, THOMAS S.

    A STUDY WAS CONDUCTED TO EXAMINE THE FEASIBILITY OF ESTABLISHING COMMUNITY APPRENTICESHIP PROGRAMS IN WEST VIRGINIA. THE CONCEPT IS THAT A WORKER IN ONE COMPANY WOULD UNDERTAKE ON THE JOB TRAINING AT ANOTHER COMPANY TO TAKE ADVANTAGE OF MACHINES AND EQUIPMENT NOT CURRENTLY OWNED BY HIS COMPANY. THE AUTHOR STATES THAT THIS WOULD UPGRADE THE WORK…

  19. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    SciTech Connect

    Allgood, Tiffany L.; Sorter, Andy

    2015-01-13

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  20. A Feasibility Study of Parent Awareness Programs. Final Report.

    ERIC Educational Resources Information Center

    Kemble, Virginia; And Others

    The purpose of this study was to explore the feasibility of group meetings of Head Start mothers that are focused on understanding of one's self and of others. A Parent Awareness Program was developed for use with two groups of Head Start mothers over a 27-week and a 17-week period, respectively. Specific objectives were that mothers would (1)…

  1. Staging and storage facility feasibility study. Final report

    SciTech Connect

    Swenson, C.E.

    1995-02-01

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates.

  2. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  3. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  4. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  5. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  6. Feasibility, limitation and possible solutions of RNAi-based technology for insect pest control.

    PubMed

    Zhang, Hao; Li, Hai-Chao; Miao, Xue-Xia

    2013-02-01

    Numerous studies indicate that target gene silencing by RNA interference (RNAi) could lead to insect death. This phenomenon has been considered as a potential strategy for insect pest control, and it is termed RNAi-mediated crop protection. However, there are many limitations using RNAi-based technology for pest control, with the effectiveness target gene selection and reliable double-strand RNA (dsRNA) delivery being two of the major challenges. With respect to target gene selection, at present, the use of homologous genes and genome-scale high-throughput screening are the main strategies adopted by researchers. Once the target gene is identified, dsRNA can be delivered by micro-injection or by feeding as a dietary component. However, micro-injection, which is the most common method, can only be used in laboratory experiments. Expression of dsRNAs directed against insect genes in transgenic plants and spraying dsRNA reagents have been shown to induce RNAi effects on target insects. Hence, RNAi-mediated crop protection has been considered as a potential new-generation technology for pest control, or as a complementary method of existing pest control strategies; however, further development to improve the efficacy of protection and range of species affected is necessary. In this review, we have summarized current research on RNAi-based technology for pest insect management. Current progress has proven that RNAi technology has the potential to be a tool for designing a new generation of insect control measures. To accelerate its practical application in crop protection, further study on dsRNA uptake mechanisms based on the knowledge of insect physiology and biochemistry is needed. PMID:23955822

  7. Time Reversal Signal Processing in Communications - A Feasibility Study

    SciTech Connect

    Meyer, A W; Candy, J V; Poggio, A J

    2002-01-30

    A typical communications channel is subjected to a variety of signal distortions, including multipath, that corrupt the information being transmitted and reduce the effective channel capacity. The mitigation of the multipath interference component is an ongoing concern for communication systems operating in complex environments such as might be experienced inside buildings, urban environments, and hilly or heavily wooded areas. Communications between mobile units and distributed sensors, so important to national security, are dependent upon flawless conveyance of information in complex environments. The reduction of this multipath corruption necessitates better channel equalization, i.e., the removal of channel distortion to extract the transmitted information. But, the current state of the art in channel equalization either requires a priori knowledge of the channel or the use of a known training sequence and adaptive filtering. If the ''assumed'' model within the equalization processor does not at least capture the dominant characteristics of the channel, then the received information may still be highly distorted and possibly useless. Also, the processing required for classical equalization is demanding in computational resources. To remedy this situation, many techniques have been investigated to replace classical equalization. Such a technique, the subject of this feasibility study, is Time Reversal Signal Processing (TRSP). Multipath is particularly insidious and a major factor in the deterioration of communication channels. Unlike most other characteristics that corrupt a communications channel, the detrimental effects of multipath cannot be overcome by merely increasing the transmitted power. Although the power in a signal diminishes as a function of the distance between the transmitter and receiver, multipath further degrades a signal by creating destructive interference that results in a loss of received power in a very localized area, a loss often

  8. A possible complementary tool for diagnosing tuberculosis: a feasibility test of immunohistochemical markers

    PubMed Central

    Seo, Kyung-Jin; Yoo, Chang-Young; Im, So-Young; Yeo, Chang-Dong; Jung, Ji-Han; Choi, Hyun-Ju; Yoo, Jin-Young

    2015-01-01

    Differentiation of tuberculous granuloma (TG) from non-tuberculous granuloma (NG) is histopathologically difficult. We evaluated the usefulness of selected immunohistochemical markers to differentiate tuberculous granuloma (TG) and non-tuberculous granuloma (NG). We selected six biomarkers (FoxP3, TNF-beta, E-selectin [ESEL], indoleamine 2,3-dioxygenase [IDO], lactoferrin [LACT], and tartrate-resistant acid phosphatase [TRAP]) and immunohistochemically analyzed their expression in the presence of two types of granulomatous tissue samples, TG (n = 36) and NG (n = 31), using a microarray format. Three of those six biomarkers (LACT, IDO, and TNF-beta) were moderately accurate in discriminating TG from NG, individually and in combination, according to ROC analysis (AUC = 0.7-0.89, sensitivity = 55.6-77.8%, specificity = 71.0-100%). Our data indicate that selected immunohistochemical markers (LACT, IDO, and TNF-beta) can be used in ancillary tests to differentiate TG from NG in tissue samples. Further large-scale studies are required to validate our results. PMID:26823702

  9. Quantitative error analysis for computer assisted navigation: a feasibility study

    PubMed Central

    Güler, Ö.; Perwög, M.; Kral, F.; Schwarm, F.; Bárdosi, Z. R.; Göbel, G.; Freysinger, W.

    2013-01-01

    Purpose The benefit of computer-assisted navigation depends on the registration process, at which patient features are correlated to some preoperative imagery. The operator-induced uncertainty in localizing patient features – the User Localization Error (ULE) - is unknown and most likely dominating the application accuracy. This initial feasibility study aims at providing first data for ULE with a research navigation system. Methods Active optical navigation was done in CT-images of a plastic skull, an anatomic specimen (both with implanted fiducials) and a volunteer with anatomical landmarks exclusively. Each object was registered ten times with 3, 5, 7, and 9 registration points. Measurements were taken at 10 (anatomic specimen and volunteer) and 11 targets (plastic skull). The active NDI Polaris system was used under ideal working conditions (tracking accuracy 0.23 mm root mean square, RMS; probe tip calibration was 0.18 mm RMS. Variances of tracking along the principal directions were measured as 0.18 mm2, 0.32 mm2, and 0.42 mm2. ULE was calculated from predicted application accuracy with isotropic and anisotropic models and from experimental variances, respectively. Results The ULE was determined from the variances as 0.45 mm (plastic skull), 0.60 mm (anatomic specimen), and 4.96 mm (volunteer). The predicted application accuracy did not yield consistent values for the ULE. Conclusions Quantitative data of application accuracy could be tested against prediction models with iso- and anisotropic noise models and revealed some discrepancies. This could potentially be due to the facts that navigation and one prediction model wrongly assume isotropic noise (tracking is anisotropic), while the anisotropic noise prediction model assumes an anisotropic registration strategy (registration is isotropic in typical navigation systems). The ULE data are presumably the first quantitative values for the precision of localizing anatomical landmarks and implanted fiducials

  10. Encoal mild coal gasification project: Commercial plant feasibility study

    SciTech Connect

    1997-07-01

    In order to determine the viability of any Liquids from Coal (LFC) commercial venture, TEK-KOL and its partner, Mitsubishi Heavy Industries (MHI), have put together a technical and economic feasibility study for a commercial-size LFC Plant located at Zeigler Coal Holding Company`s North Rochelle Mine site. This resulting document, the ENCOAL Mild Coal Gasification Plant: Commercial Plant Feasibility Study, includes basic plant design, capital estimates, market assessment for coproducts, operating cost assessments, and overall financial evaluation for a generic Powder River Basin based plant. This document and format closely resembles a typical Phase II study as assembled by the TEK-KOL Partnership to evaluate potential sites for LFC commercial facilities around the world.

  11. 7 CFR 4280.181 - Awarding and administering feasibility study grants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Awarding and administering feasibility study grants... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.181 Awarding and administering feasibility study grants. Renewable energy system feasibility study grants will...

  12. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... request assistance to conduct a feasibility study? To request assistance to conduct a feasibility study... submit a full proposal to conduct a feasibility study in response to the program announcement,...

  13. 7 CFR 4280.181 - Awarding and administering feasibility study grants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Awarding and administering feasibility study grants... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.181 Awarding and administering feasibility study grants. Renewable energy system feasibility study grants will...

  14. 7 CFR 4280.181 - Awarding and administering feasibility study grants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Awarding and administering feasibility study grants... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.181 Awarding and administering feasibility study grants. Renewable energy system feasibility study grants will...

  15. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... request assistance to conduct a feasibility study? To request assistance to conduct a feasibility study... submit a full proposal to conduct a feasibility study in response to the program announcement,...

  16. 7 CFR 4280.177 - Evaluation of feasibility study grant applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Evaluation of feasibility study grant applications... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.177 Evaluation of feasibility study grant applications. (a) Agency evaluation. Feasibility study...

  17. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Feasibility study grant applications-content. 4280... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176 Feasibility study grant applications—content. Applications for feasibility study grants must include a...

  18. 7 CFR 4280.176 - Feasibility study grant applications-content.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Feasibility study grant applications-content. 4280... Energy for America Program General Renewable Energy System Feasibility Study Grants § 4280.176 Feasibility study grant applications—content. Applications for feasibility study grants must include a...

  19. 43 CFR 404.18 - How can I request assistance to conduct a feasibility study?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... feasibility study? 404.18 Section 404.18 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... request assistance to conduct a feasibility study? To request assistance to conduct a feasibility study... submit a full proposal to conduct a feasibility study in response to the program announcement,...

  20. Feasibility Study for Renewable Energy Development on Tribal Lands

    SciTech Connect

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--The objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This

  1. PTHA Feasibility: a Case Study in the Mediterranean

    NASA Astrophysics Data System (ADS)

    Lorito, S.; Basili, R.; Selva, J.; Romano, F.; Tiberti, M.; Piatanesi, A.; Kastelic, V.

    2012-12-01

    We propose a possible strategy for making Probabilistic Tsunami Hazard Assessment (PTHA) feasible. In principle, our approach can include all known tsunamigenic seismic sources, and numerically simulated tsunami generation propagation and inundation, within an explicit uncertainty treatment. For a given target zone, we start considering the available knowledge on submarine faults geometry and behavior to define a likely over-complete set of causative scenarios. We then calculate tsunami hazard based on wave propagation in the linear approximation ('linear PTHA'), expressed as a probability of exceeding some damage metric threshold in a given time at points at a fixed depth on the seafloor. This choice lessens the computational demand with respect to calculating inundation, and it is performed using a mixed logic/event tree approach which includes, wherever possible, the formal and explicit treatment of epistemic and aleatory uncertainties. We subsequently filter out from our scenario ensemble only the earthquakes giving a significant contribution at the target site by means of a two-step filter. The first step investigates the cumulative distribution of the damage metric to select the regions of the source parameters space that are important to PTHA. The second step uses a pattern recognition technique for undersampling the region of interest without significantly altering PTHA results. The outcome is a significantly reduced minimum set of earthquake scenarios that has to be used for calculating the computationally demanding PTHA inundation maps ('nonlinear PTHA'). Here, we present a case study in the Central Mediterranean sea to illustrate the full procedure for a section of the Hellenic Arc as a source zone and for two target zones, Eastern Sicily and Southern Crete. Extending the procedure to include stochastic slip distributions for the near-field PTHA is straightforward in the event tree; non-seismic sources such as gravitational collapses might be considered

  2. Numerical aerodynamic simulation facility feasibility study, executive summary

    NASA Technical Reports Server (NTRS)

    1979-01-01

    There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability, reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year.

  3. Feasibility study of pultruded blades for wind turbine rotors

    SciTech Connect

    Migliore, P.G.; Cheney, M.C.

    2000-02-28

    In work performed under subcontract to the National Renewable Energy Laboratory (NREL), a preliminary design study and proof-of-concept field test were conducted to evaluate the feasibility of using pultruded blades for wind turbine rotors. A 400 kW turbine was selected for the design study, and a scaled 80 kW rotor was fabricated and tested as a demonstration of the concept. To examine the feasibility of pultruded blades, several issues were addressed, including power performance, tower strikes, yaw stability, stall flutter, fatigue, and rotor cost. Results showed that with proper design, rotors using pultruded blades demonstrate acceptable fatigue life and stable yaw behavior without tower strikes. Furthermore, blades using this technology may be manufactured for approximately half the cost of conventional blades. Field tests of the scaled rotor provided experimental data on power performance and loads while verifying stable yaw operation.

  4. Feasibility study for the development of low temperature curing adhesives

    NASA Technical Reports Server (NTRS)

    Green, H. E.; Sutherland, J. D.; Sheppard, C. H.

    1974-01-01

    The feasibility of a new approach for the development of stable, easily handled, room temperature (293 K - 311 K) curing adhesives was studied and demonstrated. The work concentrated on a family of unsaturated amide/ester resins. Twelve candidate resins were synthesized and tested for completeness of cure at room temperature, adhesion to aluminum and titanium, shear strength, moisture resistance and heat stability. The three most promising candidate resins were selected and recommended for further development.

  5. Feasibility Study of Optically Transparent Microstrip Patch Antenna

    NASA Technical Reports Server (NTRS)

    Simons, Rainee N.; Lee, Richard Q.

    1997-01-01

    The paper presents a feasibility study on optically transparent patch antennas with microstrip line and probe feeds. The two antennas operate at 2.3 GHz and 19.5 GHz respectively. They are constructed from a thin sheet of clear polyester with an AgHT-8 optically transparent conductive coating. The experimental results show good radiation patterns and input impedance match. The antennas have potential applications in mobile wireless communications.

  6. Feasibility study of 35 GHz microwave power transmission in space

    NASA Technical Reports Server (NTRS)

    Chang, K.; Mccleary, J. C.; Pollock, M. A.

    1989-01-01

    This paper is a study of the feasibility of a 35-GHz microwave power transmission system in space. It was found that a dc to dc transmission efficiency better than 50 percent can be achieved over a distance of 50 km by using a transmitting antenna of 20 m in diameter and a receiving antenna of 40 m in diameter. Technology requirements at 35 GHz have been assessed and several stages of development have been proposed.

  7. Feasibility Study for a Hopi Utility-Scale Wind Project

    SciTech Connect

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  8. Solar feasibility study for site-specific industrial-process-heat applications. Final report

    SciTech Connect

    Murray, O.L.

    1980-03-18

    This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.

  9. PUEBLO OF ZIA RENEWABLE ENERGY DEVELOPMENT FEASIBILITY STUDY

    SciTech Connect

    Pino, Peter M.; Lakshman, Jai; Toole, G. Loren; Witcher, James; Emerson, Michael A.; Turner, Jeremy; Sandidge, Wendy

    2014-06-30

    The Pueblo of Zia will conduct a comprehensive feasibility study for best-use application(s) for development of renewable energy resources on its tribally held TRUST lands (i.e., Trust Lands of Zia Indian Reservation). The feasibility study is essential for determining the technical and economic viability of a future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe. Project Objectives: The feasibility study is essential for determining the technical and economic viability of future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe to: 1. Provide a balanced local renewable power supply for Zia Pueblo, its members, tribal offices, schools and buildings, and businesses on tribal lands 2. Provide a firm power supply for export and commercial market distribution 3. Provide economic development for the Tribe and its members, including job training and creation, each in accordance with the goals and objectives as conveyed by the Pueblo of Zia Tribal Council, Tribal Administration, and outlined in The Pueblo of Zia Comprehensive Plan and Pueblo of Zia — Zia Enterprise Zone Master Plan. A key goal of the study is to analyze the integrated development of solar, geothermal, and wind renewable energy resources at Zia Pueblo, with added potential to combine gas-fired generation to accomplish energy firming. Geothermal offers a base load source of energy, providing power continuously for end users. Wind and solar offer intermediate and peaking sources of energy, which can be harvested throughout the day, with periods of variable but predicable output. Variability will be managed in an integrated manner, using Zia Pueblo's combined renewable resources to generate high-quality power. Tasks are intended to collect, catalog, map, and analyze existing data on Zia Pueblo's renewable energy resource base and then match resource attributes with the most

  10. Feasibility Study for Casting of High Temperature Refractory Superalloy Composites

    NASA Technical Reports Server (NTRS)

    Lee, Jonathan A.

    1998-01-01

    Abstract This study investigated the feasibility of using conventional casting technique to fabricate refractory wires reinforced superalloy composites. These composites were being developed for advanced rocket engine turbine blades and other high temperature applications operating up to 2000 F. Several types of refractory metal wires such as W- Th, W-Re, Mo-Hf-C and W-HF-C reinforced waspaloy were experimentally cast and heat treated at 2000 F up to 48 hrs. Scanning electron microscope analysis was conducted in regions adjacent to the wire-matrix interface to determine the reaction zone and chemical compatibility resulting from material interdiffusion. It was concluded that fabrication using conventional casting may be feasible because the wire-matrix reaction zone thickness was comparable to similar composites produced by arc-sprayed monotape with hot isostatic pressing technique, Moreover, it was also found that the chemical compatibility could be improved significantly through a slight modification of the superalloy matrix compositions.

  11. Design feasibility study of a Space Station Freedom truss

    NASA Astrophysics Data System (ADS)

    Armand, Sasan C.; Dohogne, Caroline A.

    1992-04-01

    Here, the focus is on the design and configuration feasibility of the short spacer for the Space Station Program in its launch configuration. The product of this study is being used by Rockwell International (Rocketdyne Division) as they continue their design concept of the current short spacer configuration. It is anticipated that the launch loads will dominate the on-orbit loads and dictate the design configuration of the short spacer. At the present time, the on-orbit loads have not been generated. The structural analysis discussed herein is based on the transient events derived from the Space Transportation System (STS) Interface Control Document (ICD). The transient loading events consist of liftoff loads, landing loads, and emergency landing loads. The quasi-static loading events have been neglected, since the magnitude of the acceleration factors are lower than the transient acceleration factors. The normal mode analyses presented herein are based on the most feasible configurations with acceptable stress ranges.

  12. Market assessment and technical feasibility study of PFBC ash use

    SciTech Connect

    Smith, V.E.; Bland, A.E.; Brown, T.H.; Georgiou, D.N.; Wheeldon, J.

    1994-10-01

    The overall objectives of this study are to determine the market potential and the technical feasibility of using PFBC ash in high volume ash use applications. The information will be of direct use to the utility industry in assessing the economics of PFBC power generation in light of ash disposal avoidance through ash marketing. In addition, the research is expected to result in the generation of generic data on the use of PFBC ash that could lead to novel processing options and procedures. The specific objectives of the proposed research and demonstration effort are: Define resent and future market potential of PFBC ash for a range of applications (Phase I); assess the technical feasibility of PFBC ash use in construction, civil engineering and agricultural applications (Phase II); and demonstrate the most promising of the market and ash use options in full-scale field demonstrations (Phase III).

  13. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    SciTech Connect

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  14. Feasibility study for a numerical aerodynamic simulation facility: Summary

    NASA Technical Reports Server (NTRS)

    Lincoln, N. R.

    1979-01-01

    The Ames Research Center of NASA is engaged in the development and investigation of numerical methods and computer technologies to be employed in conjunction with physical experiments, particularly utilizing wind tunnels in the furtherance of the field of aircraft and aerodynamic body design. Several studies, aimed primarily at the areas of development and production of extremely high-speed computing facilities, were conducted. The studies focused on evaluating the aspects of feasibility, reliability, costs, and practicability of designing, constructing, and bringing into effect production of a special-purpose system. An executive summary of the activities for this project is presented in this volume.

  15. Feasibility study for mega-electron-volt electron beam tomography

    SciTech Connect

    Hampel, U.; Baertling, Y.; Hoppe, D.; Kuksanov, N.; Fadeev, S.; Salimov, R.

    2012-09-15

    Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

  16. Ryazan power plant feasibility study. Volume 2. Export trade information

    SciTech Connect

    Not Available

    1994-07-01

    This study was funded by the U.S. Trade and Development Agency on behalf of the Ryazan Power Plant Joint Stock Company to assess the feasibility of rehabilitating the Ryazan Power Plant in Novomichurinsk, Russia. The scope of this study includes reviewing plant equipment and operations as well as making recommendations for upgrade to present day plant standards. The main emphasis of the report is on boiler analysis, but also includes all equipment from coal entering the plant to electrical power leaving the plant. This is the second of two volumes and is divided into the following sections: (C) Technical - Sections 6-18; (D) Commercial; (E) Socioeconomic Considerations; (F) Conclusions.

  17. Usefulness of comprehensive feasibility studies in environmental epidemiology investigations: a case study in Minnesota.

    PubMed Central

    Bender, A P; Williams, A N; Sprafka, J M; Mandel, J S; Straub, C P

    1988-01-01

    Episodes of public water supply contamination with industrial or agricultural chemicals frequently give rise to public concerns about adverse health effects. These concerns may precipitate epidemiologic or clinical investigations requiring large expenditures of state and federal resources regardless of whether such investigations are justified by scientific criteria. An alternative is a comprehensive feasibility study, utilizing all available information to determine whether large-scale studies are warranted or feasible. At a relatively modest cost, a feasibility study allows health officials to identify information needs and deficiencies, outline potential study options and costs, clearly establish the rationale for a proposed study or, conversely, prevent unwarranted expenditures of public resources. Furthermore, a feasibility study may in itself resolve many community and scientific concerns. This article provides a case study of the usefulness of a formal feasibility study in a situation involving an elevated cancer rate and contaminated municipal water supply wells surrounding a federal superfund site. PMID:3341499

  18. Nonintrusive gas monitoring in neonatal lungs using diode laser spectroscopy: feasibility study

    NASA Astrophysics Data System (ADS)

    Lewander, Märta; Bruzelius, Anders; Svanberg, Sune; Svanberg, Katarina; Fellman, Vineta

    2011-12-01

    A feasibility study on noninvasive, real-time monitoring of gases in lungs of preterm infants is reported, where a laser-spectroscopic technique using diode lasers tuned to oxygen and water vapor absorption lines was employed on realistic tissue phantoms. Our work suggests that the technique could provide a new possibility for surveillance of the lung function of preterm infants, in particular the oxygenation, which is of prime importance in this patient group.

  19. Feasibility Study of Biomass Electrical Generation on Tribal Lands

    SciTech Connect

    Tom Roche; Richard Hartmann; Joohn Luton; Warren Hudelson; Roger Blomguist; Jan Hacker; Colene Frye

    2005-03-29

    The goals of the St. Croix Tribe are to develop economically viable energy production facilities using readily available renewable biomass fuel sources at an acceptable cost per kilowatt hour ($/kWh), to provide new and meaningful permanent employment, retain and expand existing employment (logging) and provide revenues for both producers and sellers of the finished product. This is a feasibility study including an assessment of available biomass fuel, technology assessment, site selection, economics viability given the foreseeable fuel and generation costs, as well as an assessment of the potential markets for renewable energy.

  20. Feasibility Study for Operable Unit 7-13/14

    SciTech Connect

    K. Jean Holdren Thomas E. Bechtold Brian D. Preussner

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  1. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    SciTech Connect

    Lincoff, A.H.; Costan, G.P.; Montgomery, M.S.; White, P.J.

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  2. Feasibility Study: Potential Enhancements for the LLNL Renewables Website

    SciTech Connect

    Kearns, F; Krawchuk, M; Moritz, M; Stephens, S; Goldstein, N

    2008-01-25

    This feasibility study investigates additional improvements/extensions to the LLNL Renewables Website. Currently, the Renewables Website focuses on wind energy in California. Future enhancements will include other renewable energy sources. The extensions described below are focused along two separate yet related avenues: (1) Forecasting wildfire risk in the regions of California where new development may occur, as a part of the 'Million Solar Roofs' program. (2) Gaining a better understanding of the ecological components and potential of biofuels from forests in California. These two avenues are further described in the report. Following is a technical description of the Center for Fire Research and Outreach computing and web service capabilities.

  3. Feasibility study of a microprocessor based oculometer system

    NASA Technical Reports Server (NTRS)

    Varanasi, M. R.

    1981-01-01

    The elimination of redundancy in data to maximize processing speed and minimize storage requirements were objectives in a feasibility study of a microprocessor based oculometer system that would be portable in size and flexible in use. The appropriate architectural design of the signal processor, improved optics, and the reduction of size, weight, and power to the system were investigated. A flow chart is presented showing the strategy of the design. The simulation for developing microroutines for the high speed algorithmic processor subsystem is discussed as well as the Karhunen-Loeve transform technique for data compression.

  4. Feasibility Study on Laser Cutting of Phenolic Resin Boards

    NASA Astrophysics Data System (ADS)

    Quintero, F.; Riveiro, A.; Lusquiños, F.; Comesaña, R.; Pou, J.

    Laser cutting is the most widely implemented application of lasers in industry. The many advantages of this process stimulate users in industry to cut many different materials, such as wood and wood composites -particleboard, plywood, etc.-, which are being cut with excellent results and productivity. Phenolic resins boards are a new substitute of wood in highly aggressive environments. In the present work we study the feasibility of CO2 lasers to cut phenolic resin boards and assess the potential health hazards of the vapours and residues produced, since its thermal degradation may produce toxic organic vapors.

  5. Feasibility Study of a Satellite Solar Power Station

    NASA Technical Reports Server (NTRS)

    Glaser, P. E.; Maynard, O. E.; Mackovciak, J. J. R.; Ralph, E. I.

    1974-01-01

    A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

  6. The NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

    NASA Astrophysics Data System (ADS)

    Greenhouse, M. A.; NGST ISIM Team

    1999-05-01

    The Next Generation Space Telescope (NGST) Integrated Science Instrument Module (ISIM) is a distributed system consisting of a cryogenic instrument module that is integrated with the Optical Telescope Assembly (OTA) and science processors, software, and other electronics located in the Space Support Module (SSM). The ISIM system provides structure, environment, and data handling for several modular science instruments as well as several components of the OTA optics train. An ISIM baseline design and feasibility study is ongoing at GSFC. This pre-Phase A design was developed for integration with the Yardstick NGST architecture and packaging in a 5 m class EELV fairing. The goals of this study are to: [1] demonstrate mission science feasibility, [2] assess ISIM engineering and cost feasibility, [3] identify ISIM technology challenge areas,and [4] enable smart customer procurement of the NGST. In depth results from this work beyond those displayed here can be found at: http://www701.gsfc.nasa.gov/isim/isim.htm The flight ISIM will be developed by a GSFC led IPT that includes members from the STScI and, during Phase A/B, will grow to include the NGST Prime Contractor, and science instrument development teams from European, Canadian , and US science communities. Science instruments will be competitively procured from the science community, and will be integrated into the ISIM by GSFC. The flight qualified ISIM will then be delivered by GSFC to the NGST Prime Contractor for observatory level integration. At the start of NGST Phase A (Spring 1999), two competing prime contractors will begin development of separate NGST architectures, and the ISIM IPT will develop two ISIM designs corresponding to these architectures. Down selection to a single design will occur during mid 2001. The ISIM team welcomes science community feedback. Contact the IPT lead: Matt Greenhouse: matt@stars.gsfc.nasa.gov.

  7. Harvest for Health Gardening Intervention Feasibility Study in Cancer Survivors

    PubMed Central

    Blair, Cindy K.; Madan-Swain, Avi; Locher, Julie L.; Desmond, Renee A.; De Los Santos, Jennifer; Affuso, Olivia; Glover, Tony; Smith, Kerry; Carley, Joseph; Lipsitz, Mindy; Sharma, Ayushe; Krontiras, Helen; Cantor, Alan; Demark-Wahnefried, Wendy

    2013-01-01

    Background Cancer survivors are at increased risk for second malignancies, cardiovascular disease, diabetes, and functional decline. Evidence suggests that a healthful diet and physical activity may reduce the risk of chronic disease and improve health in this population. Methods We conducted a feasibility study to evaluate a vegetable gardening intervention that paired 12 adult and child cancer survivors with Master Gardeners to explore effects on fruit and vegetable intake, physical activity, quality-of-life, and physical function. Throughout the year-long study period, the survivor-Master Gardener dyads worked together to plan/plant 3 gardens, harvest/rotate plantings, and troubleshoot/correct problems. Data on diet, physical activity, and quality-of-life were collected via surveys; anthropometrics and physical function were objectively measured. Acceptability of the intervention was assessed with a structured debriefing survey. Results The gardening intervention was feasible (robust enrollment; minimal attrition) and well-received by cancer survivors and Master Gardeners. Improvement in 3 of 4 objective measures of strength, agility, and endurance was observed in 90% of survivors, with the following change scores (median [interquartile range]) noted between baseline and 1-year follow-up: hand grip test (+4.8 [3.0, 6.7] kg), 8 foot Get-Up-and-Go (−1.0 [−1.8, −0.2] seconds), 30-second chair stand (+3.0 [−1.0, 5.0] stands), and 6-minute walk (+38 [20, 160] feet). Increases of ≥1 fruit and vegetable serving/ day and ≥30 minutes/week of physical activity were observed in 40% and 60%, respectively. Conclusion These preliminary results support the feasibility and acceptability of a mentored gardening intervention and suggest that it may offer a novel and promising strategy to improve fruit and vegetable consumption, physical activity, and physical function in cancer survivors. A larger randomized controlled trial is needed to confirm our results. PMID

  8. The feasibility and acceptability of conducting a trial of specialist medical care and the Lightning Process in children with chronic fatigue syndrome: feasibility randomized controlled trial (SMILE study)

    PubMed Central

    2013-01-01

    Background Chronic fatigue syndrome (CFS) or myalgic encephalomyelitis (ME) is relatively common in children with limited evidence for treatment. The Phil Parker Lightning Process (LP) is a trademarked intervention, which >250 children use annually. There are no reported studies investigating the effectiveness or possible side effects of LP. Methods The trial population was drawn from the Bath and Bristol NHS specialist paediatric CFS or ME service. The study was designed as a pilot randomized trial with children (aged 12 to 18 years) comparing specialist medical care with specialist medical care plus the Lightning Process. Integrated qualitative methodology was used to explore the feasibility and acceptability of the recruitment, randomization and interventions. Results A total of 56 children were recruited from 156 eligible children (1 October 2010 to 16 June 2012). Recruitment, randomization and both interventions were feasible and acceptable. Participants suggested changes to improve feasibility and acceptability and we incorporated the following in the trial protocol: stopped collecting 6-week outcomes; introduced a second reminder letter; used phone calls to collect primary outcomes from nonresponders; informed participants about different approaches of each intervention and changed our recommendation for the primary outcome for the full study from school attendance to disability (SF-36 physical function subscale) and fatigue (Chalder Fatigue Scale). Conclusions Conducting randomized controlled trials (RCTs) to investigate an alternative treatment such as LP is feasible and acceptable for children with CFS or ME. Feasibility studies that incorporate qualitative methodology enable changes to be made to trial protocols to improve acceptability to participants. This is likely to improve recruitment rate and trial retention. Trial registration Feasibility study first randomization: 29 September 2010. Trial registration: Current Controlled Trials ISRCTN81456207

  9. Feasibility of a down-scaled HEMP-Thruster as possible N-propulsion system for LISA

    NASA Astrophysics Data System (ADS)

    Keller, A.; Köhler, P.; Gärtner, W.; Hey, F. G.; Berger, M.; Braxmaier, C.; Feili, D.; Weise, D.; Johann, U.

    2013-01-01

    An experimental feasibility study on down-scaling HEMP thrusters to textmu N thrust levels as required e.g. for NGO is presented. Prototypes are used to probe the operation space as well as measuring the divergence angle of the plume and ion acceleration voltage by means of Faraday Cups and a Retarding Potential Analyser in order to gain a deeper understanding of the influence of design parameters. From the measured values thrust and specific impulse are calculated using simple models. Stable operation with a calculated thrust down to 70 N has been demonstrated and divergence efficiencies of about 0.5 are observed. Due to the importance of the thrust value and uncertainties of the models it is clearly desirable to measure the thrust and thrust noise directly with a thrust balance. Such a device is under construction, with a picometer noise level heterodyne interferometer as optical readout.

  10. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    SciTech Connect

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.