Science.gov

Sample records for finite top mass

  1. Top Quark Mass Measurements

    SciTech Connect

    Heinson, A.P.; /UC, Riverside

    2006-08-01

    First observed in 1995, the top quark is one of a pair of third-generation quarks in the Standard Model of particle physics. It has charge +2/3e and a mass of 171.4 GeV, about 40 times heavier than its partner, the bottom quark. The CDF and D0 collaborations have identified several hundred events containing the decays of top-antitop pairs in the large dataset collected at the Tevatron proton-antiproton collider over the last four years. They have used these events to measure the top quark's mass to nearly 1% precision and to study other top quark properties. The mass of the top quark is a fundamental parameter of the Standard Model, and knowledge of its value with small uncertainty allows us to predict properties of the as-yet-unobserved Higgs boson. This paper presents the status of the measurements of the top quark mass.

  2. Top quark mass measurements

    SciTech Connect

    Hill, Christopher S.; /UC, Santa Barbara

    2004-12-01

    The top quark, with its extraordinarily large mass (nearly that of a gold atom), plays a significant role in the phenomenology of EWSB in the Standard Model. In particular, the top quark mass when combined with the W mass constrains the mass of the as yet unobserved Higgs boson. Thus, a precise determination of the mass of the top quark is a principal goal of the CDF and D0 experiments. With the data collected thus far in Runs 1 and 2 of the Tevatron, CDF and D0 have measured the top quark mass in both the lepton+jets and dilepton decay channels using a variety of complementary experimental techniques. The author presents an overview of the most recent of the measurements.

  3. Top Quark Mass Measurements

    SciTech Connect

    Heinson, A. P.

    2006-11-17

    First observed in 1995, the top quark is one of a pair of third-generation quarks in the Standard Model of particle physics. It has charge +2/3e and a mass of 171.4 GeV, about 40 times heavier than its partner, the bottom quark. The CDF and DO collaborations have identified several hundred events containing the decays of top-antitop pairs in the large dataset collected at the Tevatron proton-antiproton collider over the last four years. They have used these events to measure the top quark's mass to nearly 1% precision and to study other top quark properties. The mass of the top quark is a fundamental parameter of the Standard Model, and knowledge of its value with small uncertainty allows us to predict properties of the as-yet-unobserved Higgs boson. This paper presents the status of the measurements of the top quark mass. It is based on a talk I gave at the Conference on the Intersections of Particle and Nuclear Physics in Puerto Rico, May 2006, which also included discussion of measurements of other top quark properties.

  4. Top quark mass measurements

    SciTech Connect

    L. Cerrito

    2004-07-16

    Preliminary results on the measurement of the top quark mass at the Tevatron Collider are presented. In the dilepton decay channel, the CDF Collaboration measures m{sub t} = 175.0{sub -16.9}{sup +17.4}(stat.){+-}8.4(syst.) GeV/c{sup 2}, using a sample of {approx} 126 pb{sup -1} of proton-antiproton collision data at {radical}s = 1.96 TeV (Run II). In the lepton plus jets channel, the CDF Collaboration measures 177.5{sub -9.4}{sup +12.7}(stat.) {+-} 7.1(syst.) GeV/c{sup 2}, using a sample of {approx} 102 pb{sup -1} at {radical}s = 1.96 TeV. The D0 Collaboration has newly applied a likelihood technique to improve the analysis of {approx} 125 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV (Run I), with the result: m{sub t} = 180.1 {+-} 3.6(stat.) {+-}3.9(syst.) GeV/c{sup 2}. The latter is combined with all the measurements based on the data collected in Run I to yield the most recent and comprehensive experimental determination of the top quark mass: m{sub t} = 178.0 {+-} 2.7(stat.) {+-} 3.3(syst.) GeV/c{sup 2}.

  5. Twisted mass finite volume effects

    SciTech Connect

    Colangelo, Gilberto; Wenger, Urs; Wu, Jackson M. S.

    2010-08-01

    We calculate finite-volume effects on the pion masses and decay constant in twisted mass lattice QCD at finite lattice spacing. We show that the lighter neutral pion in twisted mass lattice QCD gives rise to finite-volume effects that are exponentially enhanced when compared to those arising from the heavier charged pions. We demonstrate that the recent two flavor twisted mass lattice data can be better fitted when twisted mass effects in finite-volume corrections are taken into account.

  6. Top Mass Measurement at CDF

    SciTech Connect

    Kordas, Kostas; /Frascati

    2006-03-01

    We report on recent measurements of the top quark mass using t{bar t} candidate events selected in {approx_equal} 320 pb{sup -1} of data from the ''Run II'' operation period of the Tevatron p{bar p} collider. More emphasis is given on the best single measurement to date (M{sub top} = 173.5{sub -3.8}{sup +3.9} GeV/c{sup 2}), provided by CDF using the ''lepton plus jets'' channel, where one W decays to a lepton-neutrino pair and the other into quarks (top quarks decay to Wb almost 100% of the time).

  7. Top quark mass and kinematics

    SciTech Connect

    Barberis, Emanuela; /Northeastern U.

    2006-05-01

    A summary of the results on the measurement of the Top Quark mass and the study of the kinematics of the t{bar t} system at the Tevatron collider is presented here. Results from both the CDF and D0 collaborations are reported.

  8. Top quark mass measurements at CDF

    SciTech Connect

    Maki, Tuula; /Helsinki U. /Helsinki Inst. of Phys.

    2007-10-01

    The top quark mass is interesting both as a fundamental parameter of the standard model as well as an important input to precision electroweak tests. The CDF Collaboration has measured the top quark mass with high precision in all decay channels with complementary methods. A combination of the results from CDF gives a top quark mass of 170.5{+-}1.3(stat.){+-}1.8(syst.) GeV/c{sup 2}.

  9. Finite mass gravitating Yang monopoles

    SciTech Connect

    Cebeci, Hakan; Sarioglu, Oezguer; Tekin, Bayram

    2008-12-15

    We show that gravity cures the infrared divergence of the Yang monopole when a proper definition of conserved quantities in curved backgrounds is used, i.e. the gravitating Yang monopole in cosmological Einstein theory has a finite mass in generic even dimensions (including time). In addition, we find exact Yang-monopole type solutions in the cosmological Einstein-Gauss-Bonnet-Yang-Mills theory and briefly discuss their properties.

  10. Top quark mass measurements at CDF

    SciTech Connect

    Brubaker, Erik; /Chicago U., EFI

    2006-05-01

    The mass of the top quark M{sub top} is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}, using 680 pb{sup -1} of p{bar p} collision data. A combination of current results from CDF gives M{sub top} = 172.0 {+-} 2.7 GeV/c{sup 2}, surpassing the stated goal of 3 GeV/c{sup 2} precision using 2 fb{sup -1} of data. Finally, a combination with current D0 results gives a world average top quark mass of 172.5 {+-} 2.3 GeV/c{sup 2}.

  11. Top Mass Measurements at the Tevatron

    SciTech Connect

    Potamianos, Karolos; /Purdue U.

    2012-01-01

    First observed in 1995, the top quark is the third-generation up-type quark of the standard model of particle physics (SM). The CDF and D0 collaborations have analyzed many t{bar t} events produced by the Tevatron collider, studying many properties of the top quark. Among these, the mass of the top quark is a fundamental parameter of the SM, since its value constrains the mass of the yet to be observed Higgs boson. The analyzed events were used to measure the mass of the top quark m{sub t} {approx_equal} 173.2 GeV/c{sup 2} with an uncertainty of less than 1 GeV/c{sup 2}. We report on the latest top mass measurements at the Tevatron, using up to 6 fb{sup -1} of data for each experiment.

  12. D{O} top quark mass analysis

    SciTech Connect

    Strovink, M.

    1995-07-01

    Based on (44-48 pb{sup -1}) of lepton + jets data, we review D0`s initial analysis of the top quark mass. The result, M{sub top} = 199 {+-} 19/21 (stat.) {+-} 22 (syst.) GeV/c{sup 2}, is insensitive to background normalization. The errors are based on ISAJET top Monte Carlo, with its more severe gluon radiation, and allow for ISAJET/HERWIG differences. Good progress is being made in reducing the systematic error. We present a new study based on two-dimensional distributions of reconstructed top quark vs. dijet mass. With 98.7% confidence we observe a peak in the top mass - dijet mass plane. The peak and its projections are similar both in shape and magnitude to expectations based on the decay sequence 1 {yields} bW, W {yields} jj.

  13. Top quark mass measurement at the Tevatron

    SciTech Connect

    Guimaraes da Costa, Joao; /Harvard U.

    2004-12-01

    The authors report on the latest experimental measurements of the top quark mass by the CDF and D0 Collaborations at the Fermilab Tevatron. They present a new top mass measurement using the t{bar t} events collected by the D0 Collaboration in Run I between 1994 and 1996. This result is combined with previous measurements to yield a new world top mass average. They also describe several preliminary results using up to 193 pb{sup -1} of t{bar t} events produced in {bar p}p collisions at {radical}s = 1.96 TeV during the Run II of the Tevatron.

  14. World average top-quark mass

    SciTech Connect

    Glenzinski, D.; /Fermilab

    2008-01-01

    This paper summarizes a talk given at the Top2008 Workshop at La Biodola, Isola d Elba, Italy. The status of the world average top-quark mass is discussed. Some comments about the challanges facing the experiments in order to further improve the precision are offered.

  15. Precision Determination of the Top Quark Mass

    SciTech Connect

    Movilla Fernandez, Pedro A.; /LBL, Berkeley

    2007-05-01

    The CDF and D0 collaborations have updated their measurements of the mass of the top quark using proton-antiproton collisions at {radical}s = 1.96 TeV produced at the Tevatron. The uncertainties in each of the top-antitop decay channels have been reduced. The new Tevatron average for the mass of the top quark based on about 1 fb{sup -1} of data per experiment is 170.9 {+-} 1.8 GeV/c{sup 2}.

  16. Measurement of the Top Quark Mass

    SciTech Connect

    Blair, R.E.; Byrum, K.L.; Kovacs, E.; Kuhlmann, S.E.; LeCompte, T.; Nodulman, L.; Breccia, L.; Brunetti, R.; Deninno, M.; Fiori, I.; Mazzanti, P.; Behrends, S.; Bensinger, J.; Blocker, C.; Kirsch, L.; Lamoureux, J.I.; Bonushkin, Y.; Hauser, J.; Lindgren, M.; Amadon, A.; Berryhill, J.; Contreras, M.; Culbertson, R.; Frisch, H.; Grosso-Pilcher, C.; Hohlmann, M.; Cronin-Hennessy, D.; Dittmann, J.R.; Goshaw, A.T.; Khazins, D.; Kowald, W.; Oh, S.H.; Albrow, M.G.; Atac, M.; Beretvas, A.; Berge, J.P.; Biery, K.; Binkley, M.; Buckley-Geer, E.; Byon-Wagner, A.; Chlebana, F.; Cihangir, S.; Cooper, J.; DeJongh, F.; Demina, R.; Derwent, P.F.; Elias, J.E.; Erdmann, W.; Flaugher, B.; Foster, G.W.; Freeman, J.; Geer, S.; Hahn, S.R.; Harris, R.M.; Incandela, J.; Jensen, H.; Joshi, U.; Kennedy, R.D.; Kephart, R.; Lammel, S.; Lewis, J.D.; Limon, P.; Lukens, P.; Maeshima, K.; Marriner, J.P.; Miao, T.; Mukherjee, A.; Nelson, C.; Newman-Holmes, C.; Patrick, J.; Klimenko, S.; Konigsberg, J.; Korytov, A.; Nomerotski, A.; Barone, M.; Bertolucci, S.; Cordelli, M.; DellAgnello, S.; Giromini, P.; Happacher, F.; Miscetti, S.; Parri, A.; Clark, A.G.; Couyoumtzelis, C.; Kambara, H.; Baumann, T.; Franklin, M.; Gordon, A.; Hamilton, R.; Huth, J.; and others

    1998-03-01

    We present a measurement of the top quark mass using a sample of t{bar t} decays into an electron or a muon, a neutrino, and four jets. The data were collected in p{bar p} collisions at {radical}(s)=1.8 TeV with the Collider Detector at Fermilab and correspond to an integrated luminosity of 109 pb{sup {minus}1} . We measure the top quark mass to be 175.9{plus_minus}4.8(stat){plus_minus}4.9( syst) GeV /c{sup 2} . {copyright} {ital 1998} {ital The American Physical Society}

  17. Dynamical generation of the top quark mass

    NASA Astrophysics Data System (ADS)

    Popovic, Marko Berislav

    2002-09-01

    I study new physics theories in which the observed mass of the heaviest elementary particle, the top quark, is a result of a dynamical mechanism at the subatomic level. The same mechanism needs to explain the transition of the effective physical description at the largest space-time scales to that at smaller scales. This large-scale description is characterized by non-zero masses for most of the elementary particles and the existence of the familiar electromagnetic interactions. The description at smaller space-time scales is characterized by the presence of a richer set of fundamental interactions, including weak and hypercharge interactions, as well as no masses for the particles. As a minimal consequence of this transition, particle theories commonly predict the existence of a still unobserved particle, called the Higgs, at the largest scales. New physics considered in this thesis includes the following: (1) Models with new fundamental interactions that select the top quark and give an exclusive role to its dynamical mass generation mechanism. I propose one such model, discuss current experimental constraints, and suggest future tests of this idea. (2) Models with new spin one-half particles, not sensitive to the weak interactions, that mix with ordinary particles, including the top quark. I discuss the phenomenology, i.e., analyze data from particle colliders, and set limits on the parameters of the models. (3) Models with new spin one-half particles, sensitive to the weak interactions, that mix with ordinary particles. I propose the model structure, discuss some of its phenomenology, and suggest further tests of this idea at linear particle accelerators. Finally, I analyze the connection between the Higgs mass (m H) and the space-time scale at which the above-mentioned transition occurs. Without introducing new physics at the smallest scales, I show that due to the very large top mass, the standard description with the Higgs particle fails at small scales

  18. Measurement of the top quark mass

    SciTech Connect

    Varnes, E.W.

    1997-12-31

    This dissertation describes the measurement of the top quark mass m{sub t} using events recorded during a 125 pb{sup -1} exposure of the D0 detector to {radical}s=1.8 TeV {anti p}p collisions. Six events consistent with the hypothesis t{anti t} {yields} bW{sup +}, {anti b}W{sup -} {yields} b{anti l}{nu}, {anti b}l{anti {nu}} form the dilepton sample. The kinematics of such events may be reconstructed for any assumed mt, and the likelihood of each such solution evaluated. A measurement of m{sub t} based on these relative solution likelihoods gives m{sub t} = 169.9 {+-} 14.8 (stat.) {+-} 3. 8 (syst.) GeV/c{sup 2}. A 2C kinematic fit is performed on a sample of 77 events consistent with t{anti t} {yields} bW{sup +}, {anti b}W{sup -} {yields} b{anti l}{nu}, {anti b}q{anti q} , and this, in combination with an estimate on the likelihood that each event is top, yields m{sub t} = 173.3 {+-} 5.6 (stat.) {+-} 6.2 (syst.) GeV/c{sup 2} . A combination of these two measurements gives m{sub t} = 173.1 {+-} 5.2 (stat.) {+-} 5.7 (syst.) GeV/c{sup 2}.

  19. Hemisphere jet mass distribution at finite Nc

    NASA Astrophysics Data System (ADS)

    Hagiwara, Yoshikazu; Hatta, Yoshitaka; Ueda, Takahiro

    2016-05-01

    We perform the leading logarithmic resummation of nonglobal logarithms for the single-hemisphere jet mass distribution in e+e- annihilation including the finite-Nc corrections. The result is compared with the previous all-order result in the large-Nc limit as well as fixed-order perturbative calculations.

  20. Phase space matching and finite lifetime effects for top-pair production close to threshold

    SciTech Connect

    Hoang, Andre H.; Reisser, Christoph J.; Ruiz-Femenia, Pedro

    2010-07-01

    The top-pair tt production cross section close to threshold in e{sup +}e{sup -} collisions is strongly affected by the small lifetime of the top quark. Since the cross section is defined through final states containing the top decay products, a consistent definition of the cross section depends on prescriptions of how these final states are accounted for the cross section. Experimentally, these prescriptions are implemented, for example, through cuts on kinematic quantities such as the reconstructed top quark invariant masses. As long as these cuts do not reject final states that can arise from the decay of a top and an antitop quark with a small off-shellness compatible with the nonrelativistic power counting, they can be implemented through imaginary phase space matching conditions in nonrelativistic QCD. The prescription-dependent cross section can then be determined from the optical theorem using the e{sup +}e{sup -} forward scattering amplitude. We compute the phase space matching conditions associated to cuts on the top and antitop invariant masses at next-to-next-to-leading logarithmic order and partially at next-to-next-to-next-to-leading logarithmic order in the nonrelativistic expansion accounting also for higher order QCD effects. Together with finite lifetime and electroweak effects known from previous work, we analyze their numerical impact on the tt cross section. We show that the phase space matching contributions are essential to make reliable nonrelativistic QCD predictions, particularly for energies below the peak region, where the cross section is small. We find that irreducible background contributions associated to final states that do not come from top decays are strongly suppressed and can be neglected for the theoretical predictions.

  1. Measurements of the top quark mass at the Tevatron

    SciTech Connect

    Brandt, Oleg; /Gottingen U., II. Phys. Inst.

    2012-04-01

    The mass of the top quark (m{sub top}) is a fundamental parameter of the standard model (SM). Currently, its most precise measurements are performed by the CDF and D0 collaborations at the Fermilab Tevatron p{bar p} collider at a centre-of-mass energy of {radical}s = 1.96 TeV. We review the most recent of those measurements, performed on data samples of up to 8.7 fb{sup -1} of integrated luminosity. The Tevatron combination using up to 5.8 fb{sup -1} of data results in a preliminary world average top quark mass of m{sub top} = 173.2 {+-} 0.9 GeV. This corresponds to a relative precision of about 0.54%. We conclude with an outlook of anticipated precision the final measurement of m{sub top} at the Tevatron.

  2. Measurement of the top quark mass at D0

    SciTech Connect

    Protopopescu, S.; D0 Collaboration

    1996-12-31

    The mass of the top quark is measured using a sample of 93 lepton + 4 or more jets events collected with the D0 detector at the FNAL Tevatron collider. The authors find the top quark mass is 169 {+-} 8(stat.) {+-} 8(syst.) GeV/c{sup 2}. The analysis assumes that top quarks are produced as t{anti t} pairs that decay to W bosons and b quarks. The final states result when one W decays to e{nu} or {mu}{nu} and the other W to q{anti q}. More than four jets may be present because of final and initial state radiation.

  3. Top Quark Mass in Events with two Charged Leptons at the D0 Experiment

    SciTech Connect

    Boline, Daniel Dooley

    2010-01-01

    The top quark is the most massive observed fundamental subatomic particle, and at the Tevatron accelerator is produced mostly in top-antitop (t$\\bar{t}$) quark pairs from the collisions of protons and anti-protons. Each top quark decays into a bottom quark and a W boson. The W boson can then decay into a pair of quarks, or into a charged lepton and a neutrino. The various decays can be broken up into three different channels based on the number of leptons from the decay of the W bosons: all-jets (with no leptons), lepton+jets (with one lepton), and dilepton (with two leptons). This dissertation will present a measurement of the top quark mass in the dilepton channel. The dilepton channel is characterized by two leptons, two neutrinos and two b-quarks. The neutrinos are not directly observed, but their absence is felt as missing transverse momentum (pT) in the detector. The combination of two leptons and large pT produces an easily isolated signal, giving the dilepton channel a high signal over background ratio. Having two neutrinos means that we cannot know what the transverse momenta of either neutrino is. This means that even if we knew the momenta of the leptons and b-quarks perfectly, we would be unable to reconstruct the mass of the top quark. This measurement gets around this problem by scanning over all possible values of the top mass, finding all consistent t{bar t} combinations, assigning a kinematic weight to each, and then adding the weights for each combination at a given possible top mass. The lepton momenta, jet momenta, and pT are only known to within some finite precision, so for a given top mass, I also vary each of these momenta within their resolutions and add the weights for a given possible top mass. After scanning over possible top masses, I choose the top mass with the largest sum of weights mtmax as an observable for the event. I then perform a template based likelihood fit of m

  4. Top quark mass in events with two charged leptons at the D0 experiment

    NASA Astrophysics Data System (ADS)

    Boline, Daniel

    The top quark is the most massive observed fundamental subatomic particle, and at the Tevatron accelerator is produced mostly in top-antitop ( tt¯) quark pairs from the collisions of protons and anti-protons. Each top quark decays into a bottom quark and a W boson. The W boson can then decay into a pair of quarks, or into a charged lepton and a neutrino. The various decays can be broken up into three different channels based on the number of leptons from the decay of the W bosons: all-jets (with no leptons), lepton+jets (with one lepton), and dilepton (with two leptons). This dissertation will present a measurement of the top quark mass in the dilepton channel. The dilepton channel is characterized by two leptons, two neutrinos and two b-quarks. The neutrinos are not directly observed, but their absence is felt as missing transverse momentum ( pT / ) in the detector. The combination of two leptons and large pT / produces an easily isolated signal, giving the dilepton channel a high signal over background ratio. Having two neutrinos means that we cannot know what the transverse momenta of either neutrino is. This means that even if we knew the momenta of the leptons and b-quarks perfectly, we would be unable to reconstruct the mass of the top quark. This measurement gets around this problem by scanning over all possible values of the top mass, finding all consistent tt¯ combinations, assigning a kinematic weight to each, and then adding the weights for each combination at a given possible top mass. The lepton momenta, jet momenta, and pT / are only known to within some finite precision, so for a given top mass, I also vary each of these momenta within their resolutions and add the weights for a given possible top mass. After scanning over possible top masses, I choose the top mass with the largest sum of weights mmaxt as an observable for the event. I then perform a template based likelihood fit of mt using mmaxt . I analyze 322 candidate events collected by the

  5. On the computation of finite bottom-quark mass effects in Higgs boson production

    NASA Astrophysics Data System (ADS)

    Mueller, Romain; Öztürk, Deniz Gizem

    2016-08-01

    We present analytic results for the partonic cross-sections contributing to the top-bottom interference in Higgs production via gluon fusion at hadron colliders at NLO accuracy in QCD. We develop a method of expansion in small bottom-mass for master integrals and combine it with the usual infinite top-mass effective theory. Our method of expansion admits a simple algorithmic description and can be easily generalized to any small parameter. These results for the integrated cross-sections will be needed in the computation of the renormalization counter-terms entering the computation of finite bottom-quark mass effects at NNLO.

  6. Top quark mass measurement using the template method at CDF

    SciTech Connect

    Aaltonen, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of t$\\bar{t}$ decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of p$\\bar{p}$ collisions at Tevatron with √s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.

  7. A top quark mass measurement using a matrix element method

    SciTech Connect

    Linacre, Jacob Thomas

    2009-01-01

    A measurement of the mass of the top quark is presented, using top-antitop pair (t$\\bar{t}$) candidate events for the lepton+jets decay channel. The measurement makes use of Tevatron p$\\bar{p}$ collision data at centre-of-mass energy √s = 1.96 TeV, collected at the CDF detector. The top quark mass is measured by employing an unbinned maximum likelihood method where the event probability density functions are calculated using signal (t$\\bar{t}$) and background (W+jets) matrix elements, as well as a set of parameterised jet-to-parton mapping functions. The likelihood function is maximised with respect to the top quark mass, the fraction of signal events, and a correction to the jet energy scale (JES) of the calorimeter jets. The simultaneous measurement of the JES correction (ΔJES) provides an in situ jet energy calibration based on the known mass of the hadronically decaying W boson. Using 578 lepton+jets candidate events corresponding to 3.2 fb -1 of integrated luminosity, the top quark mass is measured to be mt = 172.4± 1.4 (stat+ΔJES) ±1.3 (syst) GeV=c2, one of the most precise single measurements to date.

  8. Top: Latest results from the Tevatron - Cross section and mass

    SciTech Connect

    M. Coca

    2003-09-02

    The Tevatron is presently the world's only source of top quark production. This presentation summarizes the latest Run II results on top physics obtained by the CDF and D0 collaborations, using data taken until mid-January 2003. The first cross section measurements at 1.96 TeV in dilepton and lepton+jets channels agree with the NLO (Next-to-Leading-Order) theoretical predictions. Two top mass measurements, one by CDF using Run II data and another by D0 using an improved technique anticipate the improvements to come in the near future.

  9. A New Top Mass Measurement in The Dilepton Channel

    SciTech Connect

    Trovato, Marco; /INFN, Pisa /Pisa U.

    2008-01-01

    The top quark discovery completed the present picture of the fundamental constituents of the nature. Since then, the Collider Detector at Fermilab and D0 Collaborations have been spending great efforts to measure its properties better. About 30 times larger than the second heaviest quark, the mass of the top has been measured with increased statistic and more and more sophisticated techniques in order to reduce as much as possible its uncertainty. This is because the top is expected to play a fundamental role in the Standard Model. The value of its mass sets boundaries on the mass of the unobserved Higgs boson, and perhaps more appealing, studies of its properties might lead to the discovery of new physics.

  10. Top quark mass measurement using the template method at CDF

    DOE PAGESBeta

    Aaltonen, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tmore » $$\\bar{t}$$ decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of p$$\\bar{p}$$ collisions at Tevatron with √s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.« less

  11. Top quark mass measurement at CDF Run-II

    SciTech Connect

    T. Maruyama

    2004-05-11

    CDF has resumed the top quark mass measurement with upgraded detectors and Tevatron complex. High statistics should allow us to determine the top mass with an uncertainty of a few GeV/c{sup 2} by the end of Run II. The current measured value, using an integrated luminosity of {approx} 108 pb{sup -1}, is 177.5{sub -9.4}{sup +12.7} (stat.) {+-} 7.1(syst.) GeV/c{sup 2} (lepton + jets with one b-jet tagged mode: the current best mode), which is consistent with RunI measurements.

  12. Calibration of the Top-Quark Monte Carlo Mass

    NASA Astrophysics Data System (ADS)

    Kieseler, Jan; Lipka, Katerina; Moch, Sven-Olaf

    2016-04-01

    We present a method to establish, experimentally, the relation between the top-quark mass mtMC as implemented in Monte Carlo generators and the Lagrangian mass parameter mt in a theoretically well-defined renormalization scheme. We propose a simultaneous fit of mtMC and an observable sensitive to mt, which does not rely on any prior assumptions about the relation between mt and mtMC. The measured observable is independent of mtMC and can be used subsequently for a determination of mt. The analysis strategy is illustrated with examples for the extraction of mt from inclusive and differential cross sections for hadroproduction of top quarks.

  13. Precision Top-Quark Mass Measurements at CDF

    SciTech Connect

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; /Dubna, JINR /Texas A-M

    2012-07-01

    We present a precision measurement of the top-quark mass using the full sample of Tevatron {radical}s = 1.96 TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb{sup -1}. Using a sample of t{bar t} candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the W boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with in situ calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, mtop = 172.85 {+-} 0.71 (stat) {+-} 0.85 (syst) GeV/c{sup 2}.

  14. Measurement of the Top Quark Mass at CDF II

    SciTech Connect

    Kovalev, Andrew N

    2003-11-01

    The authors describe a measurement of the top quark mass using events with two charged leptons collected by the CDF II Detector from p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron. The posterior probability distribution of the top quark pole mass is calculated using the differential cross-section for the t{bar t} production and decay expressed with respect to observed leptons and jets momenta. The presence of background events in the collected sample is modeled using calculations of the differential cross-sections for major background processes. This measurement represents the first application of this method to events with two charged leptons. In a data sample with integrated luminosity of 340 pb{sup -1}, they observe 33 candidate events and measure M{sub top} = 165.2 {+-} 61.{sub stat} {+-} 3.4{sub syst} GeV/c{sup 2}.

  15. A precision measurement of the mass of the top quark.

    PubMed

    Abazov, V M; Abbott, B; Abdesselam, A; Abolins, M; Abramov, V; Acharya, B S; Adams, D L; Adams, M; Ahmed, S N; Alexeev, G D; Alton, A; Alves, G A; Arnoud, Y; Avila, C; Babintsev, V V; Babukhadia, L; Bacon, T C; Baden, A; Baffioni, S; Baldin, B; Balm, P W; Banerjee, S; Barberis, E; Baringer, P; Barreto, J; Bartlett, J F; Bassler, U; Bauer, D; Bean, A; Beaudette, F; Begel, M; Belyaev, A; Beri, S B; Bernardi, G; Bertram, I; Besson, A; Beuselinck, R; Bezzubov, V A; Bhat, P C; Bhatnagar, V; Bhattacharjee, M; Blazey, G; Blekman, F; Blessing, S; Boehnlein, A; Bojko, N I; Bolton, T A; Borcherding, F; Bos, K; Bose, T; Brandt, A; Briskin, G; Brock, R; Brooijmans, G; Bross, A; Buchholz, D; Buehler, M; Buescher, V; Burtovoi, V S; Butler, J M; Canelli, F; Carvalho, W; Casey, D; Castilla-Valdez, H; Chakraborty, D; Chan, K M; Chekulaev, S V; Cho, D K; Choi, S; Chopra, S; Claes, D; Clark, A R; Connolly, B; Cooper, W E; Coppage, D; Crépé-Renaudin, S; Cummings, M A C; Cutts, D; Da Motta, H; Davis, G A; De, K; De Jong, S J; Demarteau, M; Demina, R; Demine, P; Denisov, D; Denisov, S P; Desai, S; Diehl, H T; Diesburg, M; Doulas, S; Dudko, L V; Duflot, L; Dugad, S R; Duperrin, A; Dyshkant, A; Edmunds, D; Ellison, J; Eltzroth, J T; Elvira, V D; Engelmann, R; Eno, S; Eppley, G; Ermolov, P; Eroshin, O V; Estrada, J; Evans, H; Evdokimov, V N; Ferbel, T; Filthaut, F; Fisk, H E; Fortner, M; Fox, H; Fu, S; Fuess, S; Gallas, E; Galyaev, A N; Gao, M; Gavrilov, V; Genik, R J; Genser, K; Gerber, C E; Gershtein, Y; Ginther, G; Gómez, B; Goncharov, P I; Gounder, K; Goussiou, A; Grannis, P D; Greenlee, H; Greenwood, Z D; Grinstein, S; Groer, L; Grünendahl, S; Grünewald, M W; Gurzhiev, S N; Gutierrez, G; Gutierrez, P; Hadley, N J; Haggerty, H; Hagopian, S; Hagopian, V; Hall, R E; Han, C; Hansen, S; Hauptman, J M; Hebert, C; Hedin, D; Heinmiller, J M; Heinson, A P; Heintz, U; Hildreth, M D; Hirosky, R; Hobbs, J D; Hoeneisen, B; Huang, J; Huang, Y; Iashvili, I; Illingworth, R; Ito, A S; Jaffré, M; Jain, S; Jesik, R; Johns, K; Johnson, M; Jonckheere, A; Jöstlein, H; Juste, A; Kahl, W; Kahn, S; Kajfasz, E; Kalinin, A M; Karmanov, D; Karmgard, D; Kehoe, R; Kesisoglou, S; Khanov, A; Kharchilava, A; Klima, B; Kohli, J M; Kostritskiy, A V; Kotcher, J; Kothari, B; Kozelov, A V; Kozlovsky, E A; Krane, J; Krishnaswamy, M R; Krivkova, P; Krzywdzinski, S; Kubantsev, M; Kuleshov, S; Kulik, Y; Kunori, S; Kupco, A; Kuznetsov, V E; Landsberg, G; Lee, W M; Leflat, A; Lehner, F; Leonidopoulos, C; Li, J; Li, Q Z; Lima, J G R; Lincoln, D; Linn, S L; Linnemann, J; Lipton, R; Lucotte, A; Lueking, L; Lundstedt, C; Luo, C; Maciel, A K A; Madaras, R J; Malyshev, V L; Manankov, V; Mao, H S; Marshall, T; Martin, M I; Mattingly, S E K; Mayorov, A A; McCarthy, R; McMahon, T; Melanson, H L; Melnitchouk, A; Merkin, A; Merritt, K W; Miao, C; Miettinen, H; Mihalcea, D; Mokhov, N; Mondal, N K; Montgomery, H E; Moore, R W; Mutaf, Y D; Nagy, E; Narain, M; Narasimham, V S; Naumann, N A; Neal, H A; Negret, J P; Nelson, S; Nomerotski, A; Nunnemann, T; O'Neil, D; Oguri, V; Oshima, N; Padley, P; Papageorgiou, K; Parashar, N; Partridge, R; Parua, N; Patwa, A; Peters, O; Pétroff, P; Piegaia, R; Pope, B G; Prosper, H B; Protopopescu, S; Przybycien, M B; Qian, J; Rajagopalan, S; Rapidis, P A; Reay, N W; Reucroft, S; Ridel, M; Rijssenbeek, M; Rizatdinova, F; Rockwell, T; Royon, C; Rubinov, P; Ruchti, R; Sabirov, B M; Sajot, G; Santoro, A; Sawyer, L; Schamberger, R D; Schellman, H; Schwartzman, A; Shabalina, E; Shivpuri, R K; Shpakov, D; Shupe, M; Sidwell, R A; Simak, V; Sirotenko, V; Slattery, P; Smith, R P; Snow, G R; Snow, J; Snyder, S; Solomon, J; Song, Y; Sorín, V; Sosebee, M; Sotnikova, N; Soustruznik, K; Souza, M; Stanton, N R; Steinbrück, G; Stoker, D; Stolin, V; Stone, A; Stoyanova, D A; Strang, M A; Strauss, M; Strovink, M; Stutte, L; Sznajder, A; Talby, M; Taylor, W; Tentindo-Repond, S; Trippe, T G; Turcot, A S; Tuts, P M; Van Kooten, R; Vaniev, V; Varelas, N; Villeneuve-Seguier, F; Volkov, A A; Vorobiev, A P; Wahl, H D; Wang, Z-M; Warchol, J; Watts, G; Wayne, M; Weerts, H; White, A; Whiteson, D; Wijngaarden, D A; Willis, S; Wimpenny, S J; Womersley, J; Wood, D R; Xu, Q; Yamada, R; Yasuda, T; Yatsunenko, Y A; Yip, K; Yu, J; Zanabria, M; Zhang, X; Zhou, B; Zhou, Z; Zielinski, M; Zieminska, D; Zieminski, A; Zutshi, V; Zverev, E G; Zylberstejn, A

    2004-06-10

    The standard model of particle physics contains parameters--such as particle masses--whose origins are still unknown and which cannot be predicted, but whose values are constrained through their interactions. In particular, the masses of the top quark (M(t)) and W boson (M(W)) constrain the mass of the long-hypothesized, but thus far not observed, Higgs boson. A precise measurement of M(t) can therefore indicate where to look for the Higgs, and indeed whether the hypothesis of a standard model Higgs is consistent with experimental data. As top quarks are produced in pairs and decay in only about 10(-24) s into various final states, reconstructing their masses from their decay products is very challenging. Here we report a technique that extracts more information from each top-quark event and yields a greatly improved precision (of +/- 5.3 GeV/c2) when compared to previous measurements. When our new result is combined with our published measurement in a complementary decay mode and with the only other measurements available, the new world average for M(t) becomes 178.0 +/- 4.3 GeV/c2. As a result, the most likely Higgs mass increases from the experimentally excluded value of 96 to 117 GeV/c2, which is beyond current experimental sensitivity. The upper limit on the Higgs mass at the 95% confidence level is raised from 219 to 251 GeV/c2. PMID:15190311

  16. Finite Element Heat & Mass Transfer Code

    Energy Science and Technology Software Center (ESTSC)

    1996-10-10

    FEHM is a numerical simulation code for subsurface transport processes. It models 3-D, time-dependent, multiphase, multicomponent, non-isothermal, reactive flow through porous and fractured media. It can accurately represent complex 3-D geologic media and structures and their effects on subsurface flow and transport. Its capabilities include flow of gas, water, and heat; flow of air, water, and heat; multiple chemically reactive and sorbing tracers; finite element/finite volume formulation; coupled stress module; saturated and unsaturated media; andmore » double porosity and double porosity/double permeability capabilities.« less

  17. Top mass measurements at the Tevatron run II

    SciTech Connect

    Velev, Gueorgui V.; /Fermilab

    2005-10-01

    The latest top quark mass measurements by the CDF and D0 experiments are presented here. The mass has been determined in the dilepton (t{bar t} {yields} e{mu}, ee, {mu}{mu} + jets + E{sub T}) and lepton plus jets (t{bar t} {yields} e or {mu} + jets + E{sub T}) final states. The most accurate single result from lepton plus jets channel is 173.5{sub -3.6}{sup +3.7}(stat. + Jet Energy Scale Systematic) {+-} 1.3(syst.) GeV/c{sup 2}, which is better than the combined CDF and D0 Run I average. A preliminary and unofficial average of the best experimental Run II results gives M{sub top} = 172.7 {+-} 3.5 GeV/c{sup 2}.

  18. Top quark and Higgs boson masses from wormhole physics

    SciTech Connect

    Harris, B.A.; Joshi, G.C. )

    1994-11-01

    We bring together quantum field theory on [ital S][sub 4] with the Coleman wormhole hypothesis, which imposes constraints on terms in the gravitational Lagrangian. In particular, we investigate the effect of matter fields on the trace anomaly, which is related to the (curvature)[sup 2] terms, by the use of the renormalization group equations. We consider a toy model of a nonconformally coupled Higgs boson to a single top'' quark. By numerically solving the renormalization group equations for the couplings of the model, we can find preferred values of the particle masses for various values of the bare nonconformal coupling. By making the [ital ad] [ital hoc] assumption that the tree-level, Higgs boson treace anomaly vanishes on shell, a unique prediction can be made within this model for the masses of both the Higgs boson and the top quark.

  19. Flavor Gauge Theory, and Masses of Top and Neutrino

    NASA Astrophysics Data System (ADS)

    Cvetič, G.; Kim, C. S.

    We assume that the standard model (SM) breaks down around some energy Λ, and is replaced by a new (Higgsless) flavor gauge theory (FGT). We investigate this possibility by studying the renormalization group equations for the Yukawa couplings of SM with two Higgs doublets for various mt and υU/υD. With appropriate flavor democratic boundary conditions at ΛFGT, we derive the bounds on masses of top and tau-neutrino, which are compatible with experimental bounds.

  20. Top quark mass measurement from dilepton events at CDF II

    SciTech Connect

    Abulencia, A.; Acosta, D.; Adelman, Jahred A.; Affolder, Anthony A.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara /Cantabria Inst. of Phys.

    2005-12-01

    We report a measurement of the top quark mass using events collected by the CDF II Detector from p{bar p} collisions at {radical}s = 1.96 TeV at the Fermilab Tevatron. We calculate a likelihood function for the top mass in events that are consistent with t{bar t} {yields} {bar b}{ell}{sup -}{bar {nu}}{sub {ell}}b{ell}{prime}{sup +}{nu}{sub {ell}}{prime} decays. The likelihood is formed as the convolution of the leading-order matrix element and detector resolution functions. The joint likelihood is the product of likelihoods for each of 33 events collected in 340 pb{sup -1} of integrated luminosity, yielding a top quark mass M{sub t} = 165.2 {+-} 6.1(stat.) {+-} 3.4(syst.) GeV/c{sup 2}. This first application of a matrix-element technique to t{bar t} {yields} b{ell}{sup +}{nu}{sub {ell}}{bar b}{ell}{prime}{sup -}{bar {nu}}{sub {ell}}, decays gives the most precise single measurement of M{sub t} in dilepton events. Combined with other CDF Run II measurements using dilepton events, we measure M{sub t} = 167.9 {+-} 5.2(stat.) {+-} 3.7(syst.) GeV/c{sup 2}.

  1. Measurement of the top quark mass at D0

    SciTech Connect

    Petrillo, Gianluca

    2010-01-01

    The most recent measurements of the mass of the quark top at D0 are reviewed. The analysis methods include the direct measurement by Matrix Element and Weighting method and the indirect measurement from t{bar t} production cross section. They have been applied on different experimental signatures, all including at least one electron or muon. Measurements include from 1 to 3.6 fb{sup -1} of D0 data. The most recent combination of mass measurements from D0 and from CDF are also quoted.

  2. A Precision Measurement of the Top Quark Mass

    SciTech Connect

    Black, Kevin Matthew

    2005-05-01

    This dissertation describes the measurement of the top quark mass using events recorded during a {approx} 230 pb{sup -1} exposure of the D0 detector to proton-anti-proton (p{bar p}) collisions at a center of mass energy of 1.96 TeV. The Standard Model of particle physics predicts that the top quark will decay into a bottom quark and a W boson close to 100% of the time. The bottom quark will hadronize (bind with another quark) and produce a jet of hadronic particles. The W bosons can decay either into a charged lepton and a neutrino or a pair of quarks. this dissertation focuses on the top quark (t{bar t}) events in which one W decays hadronically and the other decays leptonically. Two methods of identifying t{bar t} events from the large number of events produced are used. The first is based on the unique topology of the final state particles of a heavy particle. By using the topological information of the event, the t{bar t} events can be efficiently extracted from the background. The second method relies on the identification of the remnants of the long lived bottom quarks that are expected to be produced in the decay of almost every top quark. Because the largest background processes do not contain bottom quarks, this is an extremely efficient way to select the events retaining about 60% of the t{bar t} events and removing almost 90% of the background. A kinematic fit to the top quark mass is performed on the t{bar t} candidate events using the final state particles that are seen in the detector. A likelihood technique is then used to extract the most likely value of the top quark mass, m{sub t}, and signal fraction. The result for the topological selection is m{sub t} = 169.9 {+-} 5.8(statistical){sub -7.8}{sup +8.0}(systematic) GeV while the results on the sample selected from identification of a b quark in the event is m{sub t} = 170.6 {+-} 4.2(statistical){sub -6.8}{sup +6.3}(systematic) GeV.

  3. Finite volume corrections to the electromagnetic mass of composite particles

    NASA Astrophysics Data System (ADS)

    Lee, Jong-Wan; Tiburzi, Brian C.

    2016-02-01

    The long-range electromagnetic interaction presents a challenge for numerical computations in QCD +QED . In addition to power-law finite volume effects, the standard lattice gauge theory approach introduces nonlocality through removal of photon zero-momentum modes. The resulting finite volume effects must be quantitatively understood; and, to this end, nonrelativistic effective field theories are an efficient tool, especially in the case of composite particles. Recently an oddity related to nonlocality of the standard lattice approach was uncovered by the Budapest-Marseille-Wuppertal collaboration. Explicit contributions from antiparticles appear to be required so that finite volume QED results for a pointlike fermion can be reproduced in the effective field theory description. We provide transparency for this argument by considering pointlike scalars and spinors in finite volume QED using the method of regions. For the more germane case of composite particles, we determine that antiparticle modes contribute to the finite volume electromagnetic mass of composite spinors through terms proportional to the squares of timelike form factors evaluated at threshold. We extend existing finite volume calculations to one order higher, which is particularly relevant for the electromagnetic mass of light nuclei. Additionally, we verify that the analogous finite volume contributions to the nucleon mass in chiral perturbation theory vanish in accordance with locality.

  4. Finite volume effects for nucleon and heavy meson masses

    SciTech Connect

    Colangelo, Gilberto; Fuhrer, Andreas; Lanz, Stefan

    2010-08-01

    We apply the resummed version of the Luescher formula to analyze finite volume corrections to the mass of the nucleon and of heavy mesons. We show that by applying the subthreshold expansion of the scattering amplitudes one can express the finite volume corrections in terms of only a few physical observables and the size of the box. In the case of the nucleon, the available information about the quark mass dependence of these physical quantities is discussed and used to assess the finite volume corrections to the nucleon mass as a function of the quark mass including a detailed analysis of the remaining uncertainties. For heavy mesons, the Luescher formula is derived both fully relativistically and in a nonrelativistic approximation and a first attempt at a numerical analysis is made.

  5. Measurement of the top quark mass at D0

    SciTech Connect

    Varnes, E.W.; D0 Collaboration

    1996-11-01

    D{null} has measured the top quark mass using a sample of 32 single- lepton events selected from approximately 115 pb{sup -1} of {radical}s = 1.8 TeV {ital p}{ital {anti p}} collisions collected from 1992-1996. The result is {ital m}{sub t} = 169 {+-} 8({ital stat}){+-} 8 ({ital syst}) GeV/c{sup 2}. Using a sample of 3 {ital e{mu}} events, D{null} measures {ital m}{sub t} = 158 {+-} 24({ital stat}) {+-} 10({ital syst}) GeV/c{sup 2}.

  6. Spectral probabilities of top-down tandem mass spectra

    SciTech Connect

    Liu, Xiaowen; Segar, Matthew W.; Li, Shuai Cheng; Kim, Sangtae

    2014-01-24

    In mass spectrometry (MS)-based proteomics, accurate estimation of statistical signicance of peptide and protein identications is desired for determining whether they are actually correct. Probabilistic models, such as the generating function method, have been successfully applied to compute statistical signicance of peptide-spectrum matches (PSMs) in bottom-up MS, but it is limited to PSMs of short peptides without post-translational modications (PTMs). Recently, top-down MS has be- come available in many laboratories, which often identies intact proteins with PTMs. In this paper, we propose an extended generating function (EGF) method for accurately computing statistical signicance of protein- spectrum matches (PrSMs) with PTMs.

  7. Top Quark Mass from the Tevatron and LHC Colliders

    NASA Astrophysics Data System (ADS)

    Brigliadori, Luca

    2015-03-01

    The discovery of the top quark in 1995 has been one of the great successes of the CDF and D0 experiments at the Fermilab Tevatron collider. Since then, many measurements of the top quark properties have been performed in different channels and using many methods. The importance of measuring its mass lies in the possibility of verifying the predictions and the consistency of the Standard Model as well as in setting constraints on possible, still unobserved, physics. In 2010, the new CERN experiments, ATLAS and CMS, started to measure the top quark properties exploiting the large amount of data collected at the Large Hadron Collider. In March 2014, the very first combination of measurements from all the four experiments has been performed yielding Mtop = 173.34 ± 0.76 GeV, with a precision below 0.5%. In these proceedings a selected review of the most recent or relevant results obtained by the Tevatron and LHC Collaborations is presented.

  8. Identification of Ultramodified Proteins Using Top-Down Mass Spectra

    SciTech Connect

    Liu, Xiaowen; Hengel, Shawna M.; Wu, Si; Tolic, Nikola; Pasa-Tolic, Ljiljana; Pevzner, Pavel A.

    2013-11-05

    Post-translational modifications (PTMs) play an important role in various biological processes through changing protein structure and function. Some ultramodified proteins (like histones) have multiple PTMs forming PTM patterns that define the functionality of a protein. While bottom-up mass spectrometry (MS) has been successful in identifying individual PTMs within short peptides, it is unable to identify PTM patterns spread along entire proteins in a coordinated fashion. In contrast, top-down MS analyzes intact proteins and reveals PTM patterns along the entire proteins. However, while recent advances in instrumentation have made top-down MS accessible to many laboratories, most computational tools for top-down MS focus on proteins with few PTMs and are unable to identify complex PTM patterns. We propose a new algorithm, MS-Align-E, that identifies both expected and unexpected PTMs in ultramodified proteins. We demonstrate that MS-Align-E identifies many protein forms of histone H4 and benchmark it against the currently accepted software tools.

  9. Measurement of the mass difference between top and antitop quarks

    SciTech Connect

    Chatrchyan, Serguei; et al.

    2012-06-01

    A measurement of the mass difference between the top and the antitop quark (Delta m(t) = m(t) - m(anti-t)) is performed using events with a muon or an electron and at least four jets in the final state. The analysis is based on data collected by the CMS experiment at the LHC, corresponding to an integrated luminosity of 4.96 +/- 0.11 inverse femtobarns, and yields the value of Delta m(t) = -0.44 +/- 0.46 (stat) +/- 0.27 (syst) GeV. This result is consistent with equality of particle and antiparticle masses required by CPT invariance, and provides a significantly improved precision relative to existing measurements.

  10. Proteomics by FTICR Mass Spectrometry: Top Down and Bottom Up

    SciTech Connect

    Bogdanov, Bogdan; Smith, Richard D.

    2005-03-31

    This review offers a broad overview of recent FTICR applications and technological developments in the field of proteomics, directed to a variety of people with different expertise and interests. Both the ''bottom-up'' (peptide level) and ''top-down'' (intact protein level) approaches will be covered and various related aspects will be discussed and illustrated with examples that are among the best available references in the literature. ''Bottom-up topics include peptide fragmentation, the AMT approach and DREAMS technology, quantitative proteomics, post-translational modifications, and special FTICR software focused on peptide and protein identification. Topics in the ''top-down'' part include various aspects of high-mass measurements, protein tandem mass spectrometry, protein confirmations, protein-protein complexes, as well as some esoteric applications that may become more practical in the coming years. Finally, examples of integrating both approaches and medical proteomics applications using FTICR will be provided, closing with an outlook of what may be coming our way sooner than later.

  11. Application of Mass Lumped Higher Order Finite Elements

    SciTech Connect

    Chen, J.; Strauss, H. R.; Jardin, S. C.; Park, W.; Sugiyama, L. E.; G. Fu; Breslau, J.

    2005-11-01

    There are many interesting phenomena in extended-MHD such as anisotropic transport, mhd, 2-fluid effects stellarator and hot particles. Any one of them challenges numerical analysts, and researchers are seeking for higher order methods, such as higher order finite difference, higher order finite elements and hp/spectral elements. It is true that these methods give more accurate solution than their linear counterparts. However, numerically they are prohibitively expensive. Here we give a successful solution of this conflict by applying mass lumped higher order finite elements. This type of elements not only keep second/third order accuracy but also scale closely to linear elements by doing mass lumping. This is especially true for second order lump elements. Full M3D and anisotropic transport models are studied.

  12. Measurements of the top quark mass and decay width with the D0 detector

    SciTech Connect

    Ilchenko, Yuriy

    2011-11-01

    The top quark discovery in 1995 at Fermilab is one of the major proofs of the standard model (SM). Due to its unique place in SM, the top quark is an important particle for testing the theory and probing for new physics. This article presents most recent measurements of top quark properties from the D0 detector. In particular, the measurement of the top quark mass, the top antitop mass difference and the top quark decay width. The discovery of the top quark in 1995 confirmed the existence of a third generation of quarks predicted in the standard model (SM). Being the heaviest elementary particle known, the top quark appears to become an important particle in our understanding of the standard model and physics beyond it. Because of its large mass the top quark has a very short lifetime, much shorter than the hadronization time. The predicted lifetime is only 3.3 {center_dot} 10{sup -25}s. Top quark is the only quark whose properties can be studied in isolation. A Lorentz-invariant local Quantum Field Theory, the standard model is expected to conserve CP. Due to its unique properties, the top quark provides a perfect test of CPT invariance in the standard model. An ability to look at the quark before being hadronized allows to measure directly mass of the top quark and its antiquark. An observation of a mass difference between particle and antiparticle would indicate violation of CPT invariance. Top quark through its radiative loop correction to the W mass constrains the mass of the Higgs boson. A precise measurement of the top quark mass provides useful information to the search of Higgs boson by constraining its region of possible masses. Another interesting aspect is that the top quark's Yukawa coupling to the Higgs boson is very close to unity (0.996 {+-} 0.006). That implies it may play a special role in the electroweak symmetry breaking mechanism.

  13. Measurements of the top-quark mass and properties at CMS

    NASA Astrophysics Data System (ADS)

    Dünser, Marc; CMS Collaboration

    2015-06-01

    Measurements of the top-quark mass and other top-quark properties are presented, obtained from the CMS data collected in 2011 and 2012 at centre-of-mass energies of 7 and 8 TeV. The mass of the top quark is measured using several methods and decay channels. The measurements of the top-quark properties include the W helicity in top-quark decays, the search for anomalous couplings, and the ratio of top-quarks decaying to bW over qW in order to gain information on |Vtb| using both t\\bar t and single-top quark event samples. The results are compared with predictions from the standard model as well as new physics models. The cross section of t\\bar t events produced in association with a W, Z boson or a photon is also measured.

  14. Finite volume effects in the chiral extrapolation of baryon masses

    NASA Astrophysics Data System (ADS)

    Lutz, M. F. M.; Bavontaweepanya, R.; Kobdaj, C.; Schwarz, K.

    2014-09-01

    We perform an analysis of the QCD lattice data on the baryon octet and decuplet masses based on the relativistic chiral Lagrangian. The baryon self-energies are computed in a finite volume at next-to-next-to-next-to-leading order (N3LO), where the dependence on the physical meson and baryon masses is kept. The number of free parameters is reduced significantly down to 12 by relying on large-Nc sum rules. Altogether we describe accurately more than 220 data points from six different lattice groups, BMW, PACS-CS, HSC, LHPC, QCDSF-UKQCD and NPLQCD. Values for all counterterms relevant at N3LO are predicted. In particular we extract a pion-nucleon sigma term of 39-1+2 MeV and a strangeness sigma term of the nucleon of σsN=84-4+28 MeV. The flavor SU(3) chiral limit of the baryon octet and decuplet masses is determined with (802±4) and (1103±6) MeV. Detailed predictions for the baryon masses as currently evaluated by the ETM lattice QCD group are made.

  15. Measurements of the Top Quark Mass in the Dilepton Decay Channel at the D0 Experiment

    SciTech Connect

    Grohsjean, Alexander

    2008-10-01

    We present the most recent measurements of the top quark mass in the dilepton decay channel at the D0 experiment using proton-antiproton collisions with a center-of-mass energy of 1.96 TeV at the Tevatron collider. Two different methods have been used: the Neutrino Weighting and the Matrix Element method. The combined results yield a top mass of 174.4 +-3.8 GeV.

  16. Measurement of the Top Quark Mass Simultaneously in Dilepton and Lepton + Jets Decay Channels

    SciTech Connect

    Fedorko, Wojciech T.

    2008-12-01

    The authors present the first measurement of the top quark mass using simultaneously data from two decay channels. They use a data sample of √s = 1.96 TeV collisions with integrated luminosity of 1.9 fb-1 collected by the CDF II detector. They select dilepton and lepton + jets channel decays of t$\\bar{t}$ pairs and reconstruct two observables in each topology. They use non-parametric techniques to derive probability density functions from simulated signal and background samples. The observables are the reconstructed top quark mass and the scalar sum of transverse energy of the event in the dilepton topology and the reconstructed top quark mass and the invariant mass of jets from the W boson decay in lepton + jets channel. They perform a simultaneous fit for the top quark mass and the jet energy scale which is constrained in situ by the hadronic W boson resonance from the lepton + jets channel. Using 144 dilepton candidate events and 332 lepton + jets candidate events they measure: Mtop = 171.9 ± 1.7 (stat. + JES) ± 1.1 (other sys.) GeV/c2 = 171.9 ± 2.0 GeV/c2. The measurement features a robust treatment of the systematic uncertainties, correlated between the two channels and develops techniques for a future top quark mass measurement simultaneously in all decay channels. Measurements of the W boson mass and the top quark mass provide a constraint on the mass of the yet unobserved Higgs boson. The Higgs boson mass implied by measurement presented here is higher than Higgs boson mass implied by previously published, most precise CDF measurements of the top quark mass in lepton + jets and dilepton channels separately.

  17. Position-dependent mass, finite-gap systems, and supersymmetry

    NASA Astrophysics Data System (ADS)

    Bravo, Rafael; Plyushchay, Mikhail S.

    2016-05-01

    The ordering problem in quantum systems with position-dependent mass (PDM) is treated by inclusion of the classically fictitious similarity transformation into the kinetic term. This provides a generation of supersymmetry with the first-order supercharges from the kinetic term alone, while inclusion of the potential term allows us also to generate nonlinear supersymmetry with higher-order supercharges. A broad class of finite-gap systems with PDM is obtained by different reduction procedures, and general results on supersymmetry generation are applied to them. We show that elliptic finite-gap systems of Lamé and Darboux-Treibich-Verdier types can be obtained by reduction to Seiffert's spherical spiral and Bernoulli lemniscate in the presence of Calogero-like or harmonic oscillator potentials, or by angular momentum reduction of a free motion on some AdS2 -related surfaces in the presence of Aharonov-Bohm flux. The limiting cases include the Higgs and Mathews-Lakshmanan oscillator models as well as a reflectionless model with PDM exploited recently in the discussion of cosmological inflationary scenarios.

  18. Precise measurement of the top quark mass in the lepton+jets topology at CDF II

    SciTech Connect

    Abulencia, A.; Adelman, J.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; Annovi, A.; Antos, J.; /Comenius U. /Tsukuba U.

    2007-03-01

    The authors present a measurement of the mass of the top quark from proton-antiproton collisions recorded at the CDF experiment in Run II of the Fermilab Tevatron. They analyze events from the single lepton plus jets final state (t{bar t} {yields} W{sup +}bW{sup -}{bar b} {yields} lvbq{bar q}{bar b}). The top quark mass is extracted using a direct calculation of the probability density that each event corresponds to the t{bar t} final state. The probability is a function of both the mass of the top quark and the energy scale of the calorimeter jets, which is constrained in situ by the hadronic W boson mass. Using 167 events observed in 955 pb{sup -1} of integrated luminosity, they achieve the single most precise measurement of the top quark mass, 170.8 {+-} 2.2(stat.) {+-} 1.4(syst.) GeV/c{sup 2}.

  19. Di-lepton Top Quark Mass Measurement with the Neutrino Weighting Algorithm

    NASA Astrophysics Data System (ADS)

    Sabik, Simon

    2005-04-01

    We report a measurement of the Top Quark Mass using approximately 340 pb-1 of data from pp collisions at √s = 1.96 GeV at CDF Run II. We select tt candidates that are consistent with two W bosons decaying leptonically. Only one of the two charged leptons is required to be identified as an electron or a muon candidate, while the other is simply a well measured track. Using the Neutrino Weighting Algorithm to reconstruct a top quark mass in each event and comparing the resulting distribution to Monte Carlo templates, we measure the top quark mass.

  20. Measurement of the top quark mass in the dilepton channel at CDF and D0

    SciTech Connect

    Maki, Tuula; /Helsinki U. /Helsinki Inst. of Phys.

    2005-10-01

    We present recent analyses of the top quark mass measurement in dileptonic channel. The measurements use 200-360 pb{sup -1} of data collected by CDF and D0 experiments. The future prospects are discussed as well.

  1. Measurements of the Top Anti-Top Production Cross Section and Top Quark Mass in the Hadronically Decaying Tau + Jets Decay Channel at CDF

    SciTech Connect

    Hare, Daryl Curtis

    2011-01-01

    In this thesis, we present the first exclusive observation of the t-t → hadronic τ + jets decay channel. Using these events, we measure the t-t pair production cross section and the top quark mass in 2.2 fb-1 of data collected with the Collider Detector at Fermilab (CDF). The Tevatron accelerator at Fermilab provides collisions of protons and anti-protons at a center-of-mass energy of √s = 1.96 TeV and is one of only two accelerators in the world with enough energy to produce top quarks. With a branching fraction of nearly 10%, the hadronic τ + jets decay channel is the third largest t-t decay mode, and it has only been minimally explored. This the first measurement of the t-t pair production cross section in this decay channel at CDF and the first measurement of the top quark mass in this decay channel in the world. The analysis introduces a new method to recover the total momentum of the ν produced in the τ decay and an artificial neural network to reduce the contribution from the largest background source, QCD multijet background. The t-t pair production cross section is extracted by minimizing a negative log likelihood function which compares the number of observed events to the number of expected events for a given t-t cross section. The top quark mass is extracted by minimizing a negative log likelihood function built from signal and ii background probabilities which are based on the matrix elements for t-t production and decay and W + 4 parton production, respectively. Using events selected with exactly 1 hadronically decaying τ, exactly 4 jets with at least 1 identified as having originated from a b quark, and large missing transverse energy, we measure the t-t pair production cross section to be 8.8 ± 3.3 (stat.) ± 2.2 (syst.) pb and the top quark mass to be 172.7±9.3 (stat.) ±3.7 (syst.) GeV. We find both values to be in good agreement with

  2. Top quark mass: Latest CDF results, Tevatron combination and electroweak implications

    SciTech Connect

    Vellidis, Costas

    2009-10-01

    A summary of the most up-to-date top quark mass measurements at CDF is presented. These analyses use top-antitop candidate events detected in the CDF experiment at the Tevatron collider with an integrated luminosity of up to {approx}3/fb. The combination of all those measurements together with the corresponding top mass measurements from the concurrently running D0 experiment at the Tevatron yields a world average of M{sub t} = [173.1 {+-} 0.6(stat.) {+-} 1.1(syst.)] GeV/c{sup 2}.

  3. Top-quark mass measurement using events with missing transverse energy and jets at CDF

    SciTech Connect

    Aaltonen, T.

    2011-11-30

    We present a measurement of the top-quark mass with tt events using a data sample corresponding to an integrated luminosity of 5.7 fb -1 of pp collisions at the Fermilab Tevatron with √s = 1.96 TeV and collected by the CDF II Detector. We select events having no identified charged leptons, large missing transverse energy, and four, five, or six jets with at least one jet containing a secondary vertex consistent with the decay of a b quark. This analysis considers events from the semileptonic tt decay channel, including events that contain tau leptons, which are usually not included in the top-quark mass measurements. The measurement uses as kinematic variables the invariant mass of two jets consistent with the mass of the W boson, and the invariant masses of two different three-jet combinations. We fit the data to signal templates of varying top-quark masses and background templates, and measure a top-quark mass of Mtop = 172.3 ± 2.4 (stat) ± 1.0 (syst) GeV/c2.

  4. Hadron energy spectrum in polarized top-quark decays considering the effects of hadron and bottom quark masses

    NASA Astrophysics Data System (ADS)

    Nejad, S. Mohammad Moosavi; Balali, Mahboobe

    2016-03-01

    We present the analytical expressions for the next-to-leading order corrections to the partial decay width t(\\uparrow ) rightarrow bW^+, followed by brightarrow H_bX, for nonzero b-quark mass (m_bne 0) in the fixed-flavor-number scheme (FFNs). To make the predictions for the energy distribution of outgoing hadrons H_b, as a function of the normalized H_b-energy fraction x_H, we apply the general-mass variable-flavor-number scheme (GM-VFNs) in a specific helicity coordinate system where the polarization of top quark is evaluated relative to the b-quark momentum. We also study the effects of gluon fragmentation and finite hadron mass on the hadron energy spectrum so that hadron masses are responsible for the low-x_H threshold. In order to describe both the b-quark and the gluon hadronizations in top decays we apply realistic and nonperturbative fragmentation functions extracted through a global fit to the e^+e^- annihilation data from CERN LEP1 and SLAC SLC by relying on their universality and scaling violations.

  5. Top triangle moose: Combining Higgsless and topcolor mechanisms for mass generation

    NASA Astrophysics Data System (ADS)

    Chivukula, R. Sekhar; Christensen, Neil D.; Coleppa, Baradhwaj; Simmons, Elizabeth H.

    2009-08-01

    We present the details of a deconstructed model that incorporates both Higgsless and top-color mechanisms. The model alleviates the tension between obtaining the correct top quark mass and keeping Δρ small that exists in many Higgsless models. It does so by singling out the top quark mass generation as arising from a Yukawa coupling to an effective top Higgs which develops a small vacuum expectation value, while electroweak symmetry breaking results largely from a Higgsless mechanism. As a result, the heavy partners of the SM fermions can be light enough to be seen at the LHC. After presenting the model, we detail the phenomenology, showing that for a broad range of masses, these heavy fermions are discoverable at the LHC.

  6. Top triangle moose: Combining Higgsless and topcolor mechanisms for mass generation

    SciTech Connect

    Chivukula, R. Sekhar; Christensen, Neil D.; Coleppa, Baradhwaj; Simmons, Elizabeth H.

    2009-08-01

    We present the details of a deconstructed model that incorporates both Higgsless and top-color mechanisms. The model alleviates the tension between obtaining the correct top quark mass and keeping {delta}{rho} small that exists in many Higgsless models. It does so by singling out the top quark mass generation as arising from a Yukawa coupling to an effective top Higgs which develops a small vacuum expectation value, while electroweak symmetry breaking results largely from a Higgsless mechanism. As a result, the heavy partners of the SM fermions can be light enough to be seen at the LHC. After presenting the model, we detail the phenomenology, showing that for a broad range of masses, these heavy fermions are discoverable at the LHC.

  7. Measurements of the top - anti-top Production Cross Section at s**(1/2) = 1.96-TeV and Top Mass in the Dielectron Channel

    SciTech Connect

    Kozminski, Joseph Francis

    2005-05-01

    The first measurement of the top-antitop production cross section in proton-antiproton collisions at {radical}s = 1.96 TeV using 243 pb{sup -1} of data collected with the D0 detector at Fermilab is presented. In this analysis, only the dielectron final state is considered. Five events are observed, and 0.93 background events are expected. The measured cross section, after accounting for the expected branching ratio to the dielectron channel, is {sigma}{sub t{bar t}} = 14.9{sub -7.0}{sup +9.4}(stat){sub -1.8}{sup +2.5}(syst) {+-} 1.0 (lumi) pb, which agrees with the predicted cross section for top quarks with a mass of 175 GeV. In addition, a first-pass at a measurement of the top mass using the neutrino-weighting method is presented. This measurement is also performed in the dielectron channel using the five events observed in the cross section measurement.

  8. Cross-section-constrained top-quark mass measurement from dilepton events at the Tevatron.

    PubMed

    Aaltonen, T; Adelman, J; Akimoto, T; Albrow, M G; Alvarez González, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Apresyan, A; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Bednar, P; Behari, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Bridgeman, A; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carlsmith, D; Carosi, R; Carrillo, S; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; Dagenhart, D; Datta, M; Davies, T; de Barbaro, P; DeCecco, S; Deisher, A; De Lentdecker, G; De Lorenzo, G; Dell'Orso, M; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Ferrazza, C; Field, R; Flanagan, G; Forrest, R; Forrester, S; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garberson, F; Garcia, J E; Garfinkel, A F; Gerberich, H; Gerdes, D; Giagu, S; Giakoumopolou, V; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C M; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Hays, C; Heck, M; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hewamanage, S; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; Iyutin, B; James, E; Jayatilaka, B; Jeans, D; Jeon, E J; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Kar, D; Karchin, P E; Kato, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Koay, S A; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kraus, J; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kulkarni, N P; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Linacre, J; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lovas, L; Lu, R-S; Lucchesi, D; Lueck, J; Luci, C; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis, A; Margaroli, F; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Mattson, M E; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyake, H; Moed, S; Moggi, N; Moon, C S; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagai, Y; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norman, M; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagan Griso, S; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M A; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyria, A; Shalhout, S Z; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thompson, G A; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tu, Y; Turini, N; Ukegawa, F; Uozumi, S; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vázquez, F; Velev, G; Vellidis, C; Veszpremi, V; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner-Kuhr, J; Wagner, W; Wakisaka, T; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zheng, Y; Zucchelli, S

    2008-02-15

    We report the first top-quark mass measurement that uses a cross-section constraint to improve the mass determination. This measurement is made with a dilepton tt event candidate sample collected with the Collider Detector II at Fermilab. From a data sample corresponding to an integrated luminosity of 1.2 fb(-1), we measure a top-quark mass of 170.7(-3.9)(+4.2)(stat)+/-2.6(syst)+/-2.4(theory) GeV/c(2). The measurement without the cross-section constraint is 169.7(-4.9)(+5.2)(stat)+/-3.1(syst) GeV/c(2). PMID:18352461

  9. Top-quark mass measurement using events with missing transverse energy and jets at CDF

    DOE PAGESBeta

    Aaltonen, T.

    2011-11-30

    We present a measurement of the top-quark mass with tt events using a data sample corresponding to an integrated luminosity of 5.7 fb -1 of pp collisions at the Fermilab Tevatron with √s = 1.96 TeV and collected by the CDF II Detector. We select events having no identified charged leptons, large missing transverse energy, and four, five, or six jets with at least one jet containing a secondary vertex consistent with the decay of a b quark. This analysis considers events from the semileptonic tt decay channel, including events that contain tau leptons, which are usually not included inmore » the top-quark mass measurements. The measurement uses as kinematic variables the invariant mass of two jets consistent with the mass of the W boson, and the invariant masses of two different three-jet combinations. We fit the data to signal templates of varying top-quark masses and background templates, and measure a top-quark mass of Mtop = 172.3 ± 2.4 (stat) ± 1.0 (syst) GeV/c2.« less

  10. Measurement of the Top Quark Mass in Dilepton Final States with the Neutrino Weighting Method

    SciTech Connect

    Ilchenko, Yuriy

    2012-12-15

    The top quark is the heaviest fundamental particle observed to date. The mass of the top quark is a free parameter in the Standard Model (SM). A precise measurement of its mass is particularly important as it sets an indirect constraint on the mass of the Higgs boson. It is also a useful constraint on contributions from physics beyond the SM and may play a fundamental role in the electroweak symmetry breaking mechanism. I present a measurement of the top quark mass in the dilepton channel using the Neutrino Weighting Method. The data sample corresponds to an integrated luminosity of 4.3 fb-1 of p$\\bar{p}$ collisions at Tevatron with √s = 1.96 TeV, collected with the DØ detector. Kinematically under-constrained dilepton events are analyzed by integrating over neutrino rapidity. Weight distributions of t$\\bar{t}$ signal and background are produced as a function of the top quark mass for different top quark mass hypotheses. The measurement is performed by constructing templates from the moments of the weight distributions and input top quark mass, followed by a subsequent likelihood t to data. The dominant systematic uncertainties from jet energy calibration is reduced by using a correction from `+jets channel. To replicate the quark avor dependence of the jet response in data, jets in the simulated events are additionally corrected. The result is combined with our preceding measurement on 1 fb-1 and yields mt = 174.0± 2.4 (stat.) ±1.4 (syst.) GeV.

  11. Precise measurement of the top-quark mass from lepton+jets events at D0

    SciTech Connect

    Abazov, Victor Mukhamedovich

    2011-08-09

    We report a measurement of the mass of the top quark in lepton+jets final states of pp&3772; → tt̄ data corresponding to 2.6 fb-1 of integrated luminosity collected at the D0 experiment at the Fermilab Tevatron Collider. Using a matrix element method, we combine an in situ jet energy calibration with the standard jet energy scale derived in studies of Γ + jet and dijet events and employ a novel flavor-dependent jet response correction to measure a top-quark mass of mt = 176.01 ± 1.64 GeV. Combining this result with a previous result obtained on an independent data set, we measure a top-quark mass of mt = 174.94 ± 1.49 GeV for a total integrated luminosity of 3.6 fb-1.

  12. Precise measurement of the top-quark mass from lepton+jets events at D0

    DOE PAGESBeta

    Abazov, Victor Mukhamedovich

    2011-08-09

    We report a measurement of the mass of the top quark in lepton+jets final states of pp&3772; → tt̄ data corresponding to 2.6 fb-1 of integrated luminosity collected at the D0 experiment at the Fermilab Tevatron Collider. Using a matrix element method, we combine an in situ jet energy calibration with the standard jet energy scale derived in studies of Γ + jet and dijet events and employ a novel flavor-dependent jet response correction to measure a top-quark mass of mt = 176.01 ± 1.64 GeV. Combining this result with a previous result obtained on an independent data set, wemore » measure a top-quark mass of mt = 174.94 ± 1.49 GeV for a total integrated luminosity of 3.6 fb-1.« less

  13. Top-quark mass measurement in the dilepton channel using in situ jet energy scale calibration

    NASA Astrophysics Data System (ADS)

    Lee, Hyun Su

    2012-09-01

    We employ a top-quark mass measurement technique in the dilepton channel with in situ jet energy scale calibration. Three variables having different jet energy scale dependences are used simultaneously to extract not only the top-quark mass but also the energy scale of the jet from a single likelihood fit. Monte Carlo studies with events corresponding to an integrated luminosity of 5fb-1 proton-proton collisions at the Large Hadron Collider s=7TeV are performed. Our analysis suggests that the overall jet energy scale uncertainty can be significantly reduced and the top-quark mass can be determined with a precision of less than 1GeV/c2, including jet energy scale uncertainty, at the Large Hadron Collider.

  14. Measurement of the top-quark mass with dilepton events selected using neuroevolution at CDF.

    PubMed

    Aaltonen, T; Adelman, J; Akimoto, T; Albrow, M G; Alvarez González, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Apresyan, A; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Azzurri, P; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Bednar, P; Beecher, D; Behari, S; Bellettini, G; Bellinger, J; Benjamin, D; Beretvas, A; Beringer, J; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Bridgeman, A; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Calancha, C; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carlsmith, D; Carosi, R; Carrillo, S; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavaliere, V; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Compostella, G; Convery, M E; Conway, J; Copic, K; Cordelli, M; Cortiana, G; Cox, D J; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; Dagenhart, D; Datta, M; Davies, T; de Barbaro, P; De Cecco, S; Deisher, A; De Lorenzo, G; Dell'orso, M; Deluca, C; Demortier, L; Deng, J; Deninno, M; Derwent, P F; di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Elagin, A; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Ferrazza, C; Field, R; Flanagan, G; Forrest, R; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garberson, F; Garcia, J E; Garfinkel, A F; Genser, K; Gerberich, H; Gerdes, D; Gessler, A; Giagu, S; Giakoumopoulou, V; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C M; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Hays, C; Heck, M; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hewamanage, S; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; James, E; Jayatilaka, B; Jeon, E J; Jha, M K; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Kar, D; Karchin, P E; Kato, Y; Kephart, R; Keung, J; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Knuteson, B; Ko, B R; Koay, S A; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kreps, M; Kroll, J; Krop, D; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhr, T; Kulkarni, N P; Kurata, M; Kusakabe, Y; Kwang, S; Laasanen, A T; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; Lecompte, T; Lee, E; Lee, S W; Leone, S; Lewis, J D; Lin, C S; Linacre, J; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, C; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lovas, L; Lu, R-S; Lucchesi, D; Lueck, J; Luci, C; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; Macqueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis-Katsikakis, A; Margaroli, F; Marino, C; Marino, C P; Martin, A; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Mattson, M E; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzione, A; Merkel, P; Mesropian, C; Miao, T; Miladinovic, N; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyake, H; Moggi, N; Moon, C S; Moore, R; Morello, M J; Morlok, J; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagai, Y; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norman, M; Norniella, O; Nurse, E; Oakes, L; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Orava, R; Osterberg, K; Pagan Griso, S; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Pianori, E; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Pueschel, E; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rodriguez, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Safonov, A; Sakumoto, W K; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, A; Schmidt, E E; Schmidt, M A; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shalhout, S Z; Shears, T; Shekhar, R; Shepard, P F; Sherman, D; Shimojima, M; Shiraishi, S; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spreitzer, T; Squillacioti, P; Stanitzki, M; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thompson, G A; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Totaro, P; Tourneur, S; Tu, Y; Turini, N; Ukegawa, F; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vázquez, F; Velev, G; Vellidis, C; Veszpremi, V; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner-Kuhr, J; Wagner, W; Wakisaka, T; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Whiteson, S; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Xie, S; Yagil, A; Yamamoto, K; Yamaoka, J; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zheng, Y; Zucchelli, S

    2009-04-17

    We report a measurement of the top-quark mass M_{t} in the dilepton decay channel tt[over ] --> bl;{'+} nu_{l};{'}b[over ]l;{-}nu[over ]_{l}. Events are selected with a neural network which has been directly optimized for statistical precision in top-quark mass using neuroevolution, a technique modeled on biological evolution. The top-quark mass is extracted from per-event probability densities that are formed by the convolution of leading order matrix elements and detector resolution functions. The joint probability is the product of the probability densities from 344 candidate events in 2.0 fb;{-1} of pp[over ] collisions collected with the CDF II detector, yielding a measurement of M_{t} = 171.2 +/- 2.7(stat) +/- 2.9(syst) GeV / c;{2}. PMID:19518620

  15. A Measurement of the Mass of the Top Quark in Lepton + Jets Events at CDF

    SciTech Connect

    Brubaker, Erik Matthews

    2004-12-01

    This document presents a measurement of the top quark mass using the CDF run II detector at Fermilab. Colliding beams of protons and anti-protons at Fermilab's Tevatron ({radical}s = 1.96 TeV) produce top/anti-top pairs, which decay to W{sup +}W{sup -} b{bar b}; events are selected where one W decays hadronically, and one W decays to either e or {mu} plus a neutrino. The data sample was collected between March 2002 and September 2003, and corresponds to an integrated luminosity of approximately 162 pb{sup -1}. Thirty-seven candidate t{bar t} events are found with at least one b jet identified by its displaced vertex. In each event, the best fit top quark invariant mass is determined by minimizing a {chi}{sup 2} for the overconstrained kinematic system. A likelihood fit of the reconstructed masses in the data sample to distributions from simulated signal and background events gives a top mass of 174.9{sub -7.7}{sup +7.1}(stat.) {+-} 6.5(syst.) GeV/c{sup 2}. The dominant systematic error is due to uncertainties in the jet energy measurements.

  16. Measurement of the top quark mass in lepton+jets events with secondary vertex tagging

    SciTech Connect

    Harrington, Robert Duane; /Northeastern U.

    2007-02-01

    A measurement of the top quark mass with the matrix element method in the lepton + jets final state in D0 Run II is presented. Events with single isolated energetic charged lepton (electron or muon), exactly four calorimeter jets, and significant missing transverse energy are selected. Probabilities used to discriminate between signal and background are assumed to be proportional to differential cross-sections, calculated using event kinematics and folding in object resolutions and parton distribution functions. The event likelihoods constructed using these probabilities are varied with the top quark mass, m{sub t}, and the jet energy scale, JES, to give the smallest possible combined statistical + JES uncertainty.

  17. CDF measurements of the W mass and search for the top

    SciTech Connect

    Leone, S.; CDF Collaboration

    1992-10-01

    The derivation of the W mass value of 79.91 {plus_minus} 0.39 GeV/c{sup 2} is discussed. The present limit at 91 GeV/c{sup 2} (95% C.L.) on the mass of the top quark is also presented. In the next two years of data collection, we expect to collect significantly more luminosity than in the past. We discuss prospects for the discovery of the top quark and improvements of the current measurements.

  18. Quantitative analysis of intact apolipoproteins in human HDL by top-down differential mass spectrometry

    PubMed Central

    Mazur, Matthew T.; Cardasis, Helene L.; Spellman, Daniel S.; Liaw, Andy; Yates, Nathan A.; Hendrickson, Ronald C.

    2010-01-01

    Top-down mass spectrometry holds tremendous potential for the characterization and quantification of intact proteins, including individual protein isoforms and specific posttranslationally modified forms. This technique does not require antibody reagents and thus offers a rapid path for assay development with increased specificity based on the amino acid sequence. Top-down MS is efficient whereby intact protein mass measurement, purification by mass separation, dissociation, and measurement of product ions with ppm mass accuracy occurs on the seconds to minutes time scale. Moreover, as the analysis is based on the accurate measurement of an intact protein, top-down mass spectrometry opens a research paradigm to perform quantitative analysis of “unknown” proteins that differ in accurate mass. As a proof of concept, we have applied differential mass spectrometry (dMS) to the top-down analysis of apolipoproteins isolated from human HDL3. The protein species at 9415.45 Da demonstrates an average fold change of 4.7 (p-value 0.017) and was identified as an O-glycosylated form of apolipoprotein C-III [NANA-(2 → 3)-Gal-β(1 → 3)-GalNAc, +656.2037 Da], a protein associated with coronary artery disease. This work demonstrates the utility of top-down dMS for quantitative analysis of intact protein mixtures and holds potential for facilitating a better understanding of HDL biology and complex biological systems at the protein level. PMID:20388904

  19. Measurements of the top-quark mass using charged particle tracking

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Akimoto, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Apresyan, A.; /Purdue U. /Waseda U.

    2009-10-01

    We present three measurements of the top-quark mass in the lepton plus jets channel with approximately 1.9 fb{sup -1} of integrated luminosity collected with the CDF II detector using quantities with minimal dependence on the jet energy scale. One measurement exploits the transverse decay length of b-tagged jets to determine a top-quark mass of 166.9{sub -8.5}{sup +9.5} (stat) {+-} 2.9 (syst) GeV/c{sup 2}, and another the transverse momentum of electrons and muons from W-boson decays to determine a top-quark mass of 173.5{sub -8.9}{sup +8.8} (stat) {+-} 3.8 (syst) GeV/c{sup 2}. These quantities are combined in a third, simultaneous mass measurement to determine a top-quark mass of 170.7 {+-} 6.3 (stat) {+-} 2.6 (syst) GeV/c{sup 2}.

  20. A general purpose nonlinear rigid body mass finite element for application to rotary wing dynamics

    NASA Technical Reports Server (NTRS)

    Hamilton, B. K.; Straub, F. K.; Ruzicka, G. C.

    1991-01-01

    The Second Generation Comprehensive Helicopter Analysis System employs the present formulation of the general-purpose nonlinear rigid body mass finite element, which represents the hub masses, blade tip masses, and pendulum vibration absorbers. The rigid body mass element has six degrees of freedom, and accounts for gravitational as well as dynamic effects. A consequence of deriving the element's equations from various physical principles is that, prior to the transformation which couples the rigid body mass element to the rotor blade finite element, the forces obtained for each element are fundamentally different; this is true notwithstanding the degrees-of-freedom of each element are parameterized using the same coordinates.

  1. Dynamic Stability of a #D Tensegrity Structure Carrying a Top Mass: Simulations and Experiments

    NASA Astrophysics Data System (ADS)

    Michielsen, Joris; Fey, Rob H. B.; Nijmeijer, Henk

    2012-07-01

    The static and dynamic stability of a 3D tensegrity structure carrying a top mass is investigated both theoretically and experimentally by studying static and linear dynamic responses, (nonlinear) frequency-amplitude plots, and Poincaré maps. A good correspondence between numerical and experimental results is obtained for the eigenfrequencies, FRFs, and frequency-amplitude plots.

  2. A measurement of the mass of the top quark using the ideogram technique

    SciTech Connect

    Houben, Pieter Willem Huib

    2009-06-03

    This thesis describes a measurement of the mass of the top quark on data collected with the D0 detector at the Tevatron collider in the period from 2002 until 2006. The first chapter describes the Standard Model and the prominent role of the top quark mass. The second chapter gives a description of the D0 detector which is used for this measurement. After the p$\\bar{p}$ collisions have been recorded, reconstruction of physics objects is required, which is described in Chapter 3. Chapter 4 describes how the interesting collisions in which top quarks are produced are separated from the `uninteresting' ones with a set of selection criteria. The method to extract the top quark mass from the sample of selected collisions (also called events), which is based on the ideogram technique, is explained in Chapter 5, followed in Chapter 6 by the description of the calibration of the method using simulation of our most precise knowledge of nature. Chapter 7 shows the result of the measurement together with some cross checks and an estimation of the uncertainty on this measurement. This thesis concludes with a constraint on the Higgs boson mass.

  3. Measurement of cross section of quark pair production top with the D0 experiment at the Tevatron and determination the top quark mass using this measure

    SciTech Connect

    Chevalier-Thery, Solene

    2010-06-01

    The top quark has been discovered by CDF and D0 experiments in 1995 at the proton-antiproton collider Tevatron. The amount of data recorded by both experiments makes it possible to accurately study the properties of this quark: its mass is now known to better than 1% accuracy. This thesis describes the measurement of the top pair cross section in the electron muon channel with 4, 3 fb -1 recorded data between 2006 and 2009 by the D0 experiment. Since the final state included a muon, improvements of some aspects of its identification have been performed : a study of the contamination of the cosmic muons and a study of the quality of the muon tracks. The cross section measurement is in good agreement with the theoretical calculations and the other experimental measurements. This measurement has been used to extract a value for the top quark mass. This method allows for the extraction of a better defined top mass than direct measurements as it depends less on Monte Carlo simulations. The uncertainty on this extracted mass, dominated by the experimental one, is however larger than for direct measurements. In order to decrease this uncertainty, the ratio of the Z boson and the top pair production cross sections has been studied to look for some possible theoretical correlations. At the Tevatron, the two cross sections are not theoretically correlated: no decrease of the uncertainty on the extracted top mass is therefore possible.

  4. Precision measurement of the top-quark mass in lepton+jets final states

    SciTech Connect

    Abazov, Victor Mukhamedovich

    2014-07-17

    We measure the mass of the top quark in lepton$+$jets final states using the full sample of $p\\bar{p}$ collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at $\\sqrt s=1.96 $TeV, corresponding to $9.7 {\\rm fb}^{-1}$ of integrated luminosity. We use a matrix element technique that calculates the probabilities for each event to result from $t\\bar t$ production or background. The overall jet energy scale is constrained in situ by the mass of the $W$ boson. We measure $m_t=174.98\\pm0.76$ GeV. In conclusion, this constitutes the most precise single measurement of the top-quark mass.

  5. Precision measurement of the top-quark mass in lepton+jets final states

    DOE PAGESBeta

    Abazov, Victor Mukhamedovich

    2014-07-17

    We measure the mass of the top quark in leptonmore » $+$jets final states using the full sample of $$p\\bar{p}$$ collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at $$\\sqrt s=1.96 $$TeV, corresponding to $$9.7 {\\rm fb}^{-1}$$ of integrated luminosity. We use a matrix element technique that calculates the probabilities for each event to result from $$t\\bar t$$ production or background. The overall jet energy scale is constrained in situ by the mass of the $W$ boson. We measure $$m_t=174.98\\pm0.76$$ GeV. In conclusion, this constitutes the most precise single measurement of the top-quark mass.« less

  6. Precision measurement of the top-quark mass in lepton$+$jets final states

    DOE PAGESBeta

    Abazov, Victor Mukhamedovich

    2015-06-04

    We measure the mass of the top quark in lepton þ jets final states using the full sample of pp¯ collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at √s = 1.96 TeV, corresponding to 9.7 fb-1 of integrated luminosity. We also use a matrix element technique that calculates the probabilities for each event to result from tt¯ production or background. Furthermore, the overall jet energy scale is constrained in situ by the mass of the W boson. We measure mt = 174.98 ± 0.76 GeV. As a result, this constitutes the mostmore » precise single measurement of the top-quark mass.« less

  7. Precision measurement of the top quark mass in lepton + jets final States.

    PubMed

    Abazov, V M; Abbott, B; Acharya, B S; Adams, M; Adams, T; Agnew, J P; Alexeev, G D; Alkhazov, G; Alton, A; Askew, A; Atkins, S; Augsten, K; Avila, C; Badaud, F; Bagby, L; Baldin, B; Bandurin, D V; Banerjee, S; Barberis, E; Baringer, P; Bartlett, J F; Bassler, U; Bazterra, V; Bean, A; Begalli, M; Bellantoni, L; Beri, S B; Bernardi, G; Bernhard, R; Bertram, I; Besançon, M; Beuselinck, R; Bhat, P C; Bhatia, S; Bhatnagar, V; Blazey, G; Blessing, S; Bloom, K; Boehnlein, A; Boline, D; Boos, E E; Borissov, G; Borysova, M; Brandt, A; Brandt, O; Brock, R; Bross, A; Brown, D; Bu, X B; Buehler, M; Buescher, V; Bunichev, V; Burdin, S; Buszello, C P; Camacho-Pérez, E; Casey, B C K; Castilla-Valdez, H; Caughron, S; Chakrabarti, S; Chan, K M; Chandra, A; Chapon, E; Chen, G; Cho, S W; Choi, S; Choudhary, B; Cihangir, S; Claes, D; Clutter, J; Cooke, M; Cooper, W E; Corcoran, M; Couderc, F; Cousinou, M-C; Cutts, D; Das, A; Davies, G; de Jong, S J; De La Cruz-Burelo, E; Déliot, F; Demina, R; Denisov, D; Denisov, S P; Desai, S; Deterre, C; DeVaughan, K; Diehl, H T; Diesburg, M; Ding, P F; Dominguez, A; Dubey, A; Dudko, L V; Duperrin, A; Dutt, S; Eads, M; Edmunds, D; Ellison, J; Elvira, V D; Enari, Y; Evans, H; Evdokimov, V N; Fauré, A; Feng, L; Ferbel, T; Fiedler, F; Filthaut, F; Fisher, W; Fisk, H E; Fortner, M; Fox, H; Fuess, S; Garbincius, P H; Garcia-Bellido, A; García-González, J A; Gavrilov, V; Geng, W; Gerber, C E; Gershtein, Y; Ginther, G; Gogota, O; Golovanov, G; Grannis, P D; Greder, S; Greenlee, H; Grenier, G; Gris, Ph; Grivaz, J-F; Grohsjean, A; Grünendahl, S; Grünewald, M W; Guillemin, T; Gutierrez, G; Gutierrez, P; Haley, J; Han, L; Harder, K; Harel, A; Hauptman, J M; Hays, J; Head, T; Hebbeker, T; Hedin, D; Hegab, H; Heinson, A P; Heintz, U; Hensel, C; Heredia-De La Cruz, I; Herner, K; Hesketh, G; Hildreth, M D; Hirosky, R; Hoang, T; Hobbs, J D; Hoeneisen, B; Hogan, J; Hohlfeld, M; Holzbauer, J L; Howley, I; Hubacek, Z; Hynek, V; Iashvili, I; Ilchenko, Y; Illingworth, R; Ito, A S; Jabeen, S; Jaffré, M; Jayasinghe, A; Jeong, M S; Jesik, R; Jiang, P; Johns, K; Johnson, E; Johnson, M; Jonckheere, A; Jonsson, P; Joshi, J; Jung, A W; Juste, A; Kajfasz, E; Karmanov, D; Katsanos, I; Kehoe, R; Kermiche, S; Khalatyan, N; Khanov, A; Kharchilava, A; Kharzheev, Y N; Kiselevich, I; Kohli, J M; Kozelov, A V; Kraus, J; Kumar, A; Kupco, A; Kurča, T; Kuzmin, V A; Lammers, S; Lebrun, P; Lee, H S; Lee, S W; Lee, W M; Lei, X; Lellouch, J; Li, D; Li, H; Li, L; Li, Q Z; Lim, J K; Lincoln, D; Linnemann, J; Lipaev, V V; Lipton, R; Liu, H; Liu, Y; Lobodenko, A; Lokajicek, M; Lopes de Sa, R; Luna-Garcia, R; Lyon, A L; Maciel, A K A; Madar, R; Magaña-Villalba, R; Malik, S; Malyshev, V L; Mansour, J; Martínez-Ortega, J; McCarthy, R; McGivern, C L; Meijer, M M; Melnitchouk, A; Menezes, D; Mercadante, P G; Merkin, M; Meyer, A; Meyer, J; Miconi, F; Mondal, N K; Mulhearn, M; Nagy, E; Narain, M; Nayyar, R; Neal, H A; Negret, J P; Neustroev, P; Nguyen, H T; Nunnemann, T; Orduna, J; Osman, N; Osta, J; Pal, A; Parashar, N; Parihar, V; Park, S K; Partridge, R; Parua, N; Patwa, A; Penning, B; Perfilov, M; Peters, Y; Petridis, K; Petrillo, G; Pétroff, P; Pleier, M-A; Podstavkov, V M; Popov, A V; Prewitt, M; Price, D; Prokopenko, N; Qian, J; Quadt, A; Quinn, B; Ratoff, P N; Razumov, I; Ripp-Baudot, I; Rizatdinova, F; Rominsky, M; Ross, A; Royon, C; Rubinov, P; Ruchti, R; Sajot, G; Sánchez-Hernández, A; Sanders, M P; Santos, A S; Savage, G; Savitskyi, M; Sawyer, L; Scanlon, T; Schamberger, R D; Scheglov, Y; Schellman, H; Schwanenberger, C; Schwienhorst, R; Sekaric, J; Severini, H; Shabalina, E; Shary, V; Shaw, S; Shchukin, A A; Simak, V; Skubic, P; Slattery, P; Smirnov, D; Snow, G R; Snow, J; Snyder, S; Söldner-Rembold, S; Sonnenschein, L; Soustruznik, K; Stark, J; Stoyanova, D A; Strauss, M; Suter, L; Svoisky, P; Titov, M; Tokmenin, V V; Tsai, Y-T; Tsybychev, D; Tuchming, B; Tully, C; Uvarov, L; Uvarov, S; Uzunyan, S; Van Kooten, R; van Leeuwen, W M; Varelas, N; Varnes, E W; Vasilyev, I A; Verkheev, A Y; Vertogradov, L S; Verzocchi, M; Vesterinen, M; Vilanova, D; Vokac, P; Wahl, H D; Wang, M H L S; Warchol, J; Watts, G; Wayne, M; Weichert, J; Welty-Rieger, L; Williams, M R J; Wilson, G W; Wobisch, M; Wood, D R; Wyatt, T R; Xie, Y; Yamada, R; Yang, S; Yasuda, T; Yatsunenko, Y A; Ye, W; Ye, Z; Yin, H; Yip, K; Youn, S W; Yu, J M; Zennamo, J; Zhao, T G; Zhou, B; Zhu, J; Zielinski, M; Zieminska, D; Zivkovic, L

    2014-07-18

    We measure the mass of the top quark in lepton+jets final states using the full sample of pp collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at sqrt[s] = 1.96 TeV, corresponding to 9.7 fb(-1) of integrated luminosity. We use a matrix element technique that calculates the probabilities for each event to result from tt production or background. The overall jet energy scale is constrained in situ by the mass of the W boson. We measure m(t) = 174.98 ± 0.76 GeV. This constitutes the most precise single measurement of the top-quark mass. PMID:25083634

  8. Precision measurement of the top-quark mass in lepton$+$jets final states

    SciTech Connect

    Abazov, Victor Mukhamedovich

    2015-06-04

    We measure the mass of the top quark in lepton þ jets final states using the full sample of pp¯ collision data collected by the D0 experiment in Run II of the Fermilab Tevatron Collider at √s = 1.96 TeV, corresponding to 9.7 fb-1 of integrated luminosity. We also use a matrix element technique that calculates the probabilities for each event to result from tt¯ production or background. Furthermore, the overall jet energy scale is constrained in situ by the mass of the W boson. We measure mt = 174.98 ± 0.76 GeV. As a result, this constitutes the most precise single measurement of the top-quark mass.

  9. Measurement of the top quark mass using the matrix element technique in dilepton final states

    DOE PAGESBeta

    Abazov, V. M.; Abbott, B.; Acharya, B. S.; Adams, M.; Adams, T.; Agnew, J. P.; Alexeev, G. D.; Alkhazov, G.; Alton, A.; Askew, A.; et al

    2016-08-18

    Here, we present a measurement of the top quark mass in pp collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider. The data were collected by the D0 experiment corresponding to an integrated luminosity of 9.7 fb-1. The matrix element technique is applied to tt events in the final state containing leptons (electrons or muons) with high transverse momenta and at least two jets. The calibration of the jet energy scale determined in the lepton+jets final state of tt decays is applied to jet energies. This correction provides a substantial reduction in systematic uncertainties. We obtain amore » top quark mass of mt = 173.93±1.84 GeV.« less

  10. Top quark mass measurement from dilepton events at CDF II with the matrix-element method

    SciTech Connect

    Abulencia, A.; Acosta, D.; Adelman, Jahred A.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Bologna U. /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara

    2006-05-01

    We describe a measurement of the top quark mass using events with two charged leptons collected by the CDF II detector from p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron. The likelihood in top mass is calculated for each event by convoluting the leading order matrix element describing q{bar q} {yields} t{bar t} {yields} b{ell}{nu}{sub {ell}}{bar b}{ell}{prime} {nu}{sub {ell}}, with detector resolution functions. The presence of background events in the data sample is modeled using similar calculations involving the matrix elements for major background processes. In a data sample with integrated luminosity of 340 pb{sup -1}, we observe 33 candidate events and measure M{sub top} = 165.2 {+-} 6.1(stat.) {+-} 3.4(syst.) GeV/c{sup 2}. This measurement represents the first application of this method to events with two charged leptons and is the most precise single measurement of the top quark mass in this channel.

  11. Measurement of the top quark mass in the dilepton final state using the matrix element method

    SciTech Connect

    Grohsjean, Alexander; /Munich U.

    2008-12-01

    The top quark, discovered in 1995 by the CDF and D0 experiments at the Fermilab Tevatron Collider, is the heaviest known fundamental particle. The precise knowledge of its mass yields important constraints on the mass of the yet-unobserved Higgs boson and allows to probe for physics beyond the Standard Model. The first measurement of the top quark mass in the dilepton channel with the Matrix Element method at the D0 experiment is presented. After a short description of the experimental environment and the reconstruction chain from hits in the detector to physical objects, a detailed review of the Matrix Element method is given. The Matrix Element method is based on the likelihood to observe a given event under the assumption of the quantity to be measured, e.g. the mass of the top quark. The method has undergone significant modifications and improvements compared to previous measurements in the lepton+jets channel: the two undetected neutrinos require a new reconstruction scheme for the four-momenta of the final state particles, the small event sample demands the modeling of additional jets in the signal likelihood, and a new likelihood is designed to account for the main source of background containing tauonic Z decay. The Matrix Element method is validated on Monte Carlo simulated events at the generator level. For the measurement, calibration curves are derived from events that are run through the full D0 detector simulation. The analysis makes use of the Run II data set recorded between April 2002 and May 2008 corresponding to an integrated luminosity of 2.8 fb{sup -1}. A total of 107 t{bar t} candidate events with one electron and one muon in the final state are selected. Applying the Matrix Element method to this data set, the top quark mass is measured to be m{sub top}{sup Run IIa} = 170.6 {+-} 6.1(stat.){sub -1.5}{sup +2.1}(syst.)GeV; m{sub top}{sup Run IIb} = 174.1 {+-} 4.4(stat.){sub -1.8}{sup +2.5}(syst.)GeV; m{sub top}{sup comb} = 172.9 {+-} 3.6(stat

  12. High mass selectivity for top-down proteomics by application of SWIFT technology.

    PubMed

    Guan, Shenheng; Burlingame, Alma L

    2010-03-01

    Stored waveform inverse Fourier transform (SWIFT) technology has been implemented on a commercial Fourier transform ICR mass spectrometer. Complex ejection/isolation waveforms can be generated on an arbitrary waveform generator (AWG) and applied to the instrument by use of a high speed analog switch. High mass selectivity and subsequent electron capture dissociation (ECD) of the SWIFT isolated ions has been demonstrated with analysis of intact Bovine histone H4. A mass selectivity about 0.1 m/z unit for isolation of the 18+ charge state ions was achieved. Adaptation of SWIFT on the commercial instrument provides an enhanced capability for characterizing intact proteins by top-down analysis. PMID:20060315

  13. Finite-order universal portfolios generated by probability mass functions

    NASA Astrophysics Data System (ADS)

    Tan, Choon Peng; Chu, Sin Yen; Pan, Wei Yeing

    2015-05-01

    It is shown that the finite-order universal portfolios generated by independent discrete random variables are constant rebalanced portfolios. The case where the universal portfolios are generated by the moments of the joint Dirichlet distribution is studied. The performance of the low-order Dirichlet universal portfolios on some stock-price data set is analyzed. It is demonstrated that the performance is comparable and in some cases outperform the moving-order Cover-Ordentlich universal portfolios with faster implementation time and higher wealth achieved.

  14. A measurement of the top quark mass with a matrix element method

    SciTech Connect

    Gibson, Adam Paul; /UC, Berkeley

    2006-12-01

    The authors present a measurement of the mass of the top quark. The event sample is selected from proton-antiproton collisions, at 1.96 TeV center-of-mass energy, observed with the CDF detector at Fermilab's Tevatron. They consider a 318 pb{sup -1} dataset collected between March 2002 and August 2004. They select events that contain one energetic lepton, large missing transverse energy, exactly four energetic jets, and at least one displaced vertex b tag. The analysis uses leading-order t{bar t} and background matrix elements along with parameterized parton showering to construct event-by-event likelihoods as a function of top quark mass. From the 63 events observed with the 318 pb{sup -1} dataset they extract a top quark mass of 172.0 {+-} 2.6(stat) {+-} 3.3(syst) GeV/c{sup 2} from the joint likelihood. The mean expected statistical uncertainty is 3.2 GeV/c{sup 2} for m{sub t} = 178 GTeV/c{sup 2} and 3.1 GeV/c{sup 2} for m{sub t} = 172.5 GeV/c{sup 2}. The systematic error is dominated by the uncertainty of the jet energy scale.

  15. The First measurement of the top quark mass at CDF II in the lepton+jets and dilepton channels simultaneously

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Akimoto, T.; Albrow, Michael G.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, Dante E.; Anastassov, A.; Annovi, Alberto; Antos, J.; Apollinari, G.; /Fermilab /Purdue U.

    2008-09-01

    The authors present a measurement of the mass of the top quark using data corresponding to an integrated luminosity of 1.9 fb{sup -1} of p{bar p} collisions collected at {radical}s = 1.96 TeV with the CDF II detector at Fermilab's Tevatron. This is the first measurement of the top quark mass using top-antitop pair candidate events in the lepton + jets and dilepton decay channels simultaneously. They reconstruct two observables in each channel and use a non-parametric kernel density estimation technique to derive two-dimensional probability density functions from simulated signal and background samples. The observables are the top quark mass and the invariant mass of two jets from the W decay in the lepton + jets channel, and the top quark mass and the scalar sum of transverse energy of the event in the diletpon channel. They perform a simultaneous fit for the top quark mass and the jet energy scale, which is constrained in situ by the hadronic W boson mass. using 332 lepton + jets candidate events and 144 diletpon candidate events, they measure the top quark mass to be m{sub top} = 171.9 {+-} 1.7 (stat. + JES) {+-} 1.1 (other sys.) GeV/c{sup 2} = 171.9 {+-} 2.0 GeV/c{sup 2}.

  16. De novo sequencing of peptides from top-down tandem mass spectra

    SciTech Connect

    Vyatkina, Kira; Wu, Si; Dekker, Leendert J.; vanDuijn, Martijn M.; Liu, Xiaowen; Tolic, Nikola; Dvorkin, Mikhail; Alexandrova, Sonya; Luider, Theo N.; Pasa-Tolic, Ljiljana; Pevzner, Pavel A.

    2015-09-28

    De novo sequencing of proteins and peptides is one of the most important problems in mass spectrometry-driven proteomics. A variety of methods have been developed to accomplish this task from a set of bottom-up tandem (MS/MS) mass spectra. However, a more recently emerged top-down technology, now gaining more and more popularity, opens new perspectives for protein analysis and characterization, implying a need in efficient algorithms for processing this kind of MS/MS data. Here we describe a method that allows to retrieve from a set of top-down MS/MS spectra long and accurate sequence fragments of the proteins contained in a sample. To this end, we outline a strategy for generating high-quality sequence tags from top-down spectra, and introduce the concept of a T-Bruijn graph by adapting to the case of tags the notion of an A-Bruijn graph widely used in genomics. The output of the proposed approach represents the set of amino acid strings spelled out by optimal paths in the connected components of a T-Bruijn graph. We illustrate its performance on top-down datasets acquired from carbonic anhydrase 2 (CAH2) and the Fab region of alemtuzumab.

  17. Precision Measurement of the Mass of the Top Quark in p anti-p Collisions

    SciTech Connect

    Garcia, Carlos A.; /Rochester U.

    2007-01-01

    We report a measurement of the mass of the top quark (m{sub top}) in p{bar p} collisions at a center of mass energy of 1.96 TeV. The analysis is based on p{bar p}{yields}t{bar t}{yields} lepton+jets data recorded with the D0 detector at the Fermilab Tevatron Collider. Events were preselected in the e+jets (913 events/pb of data) and in the {mu}+jets (871 events/pb of data) channels. These were analyzed through a comparison of the matrix element for the production and decay of the t{bar t} states with data, using a likelihood method and 'tagged' b quarks from the t {yields} Wb decays.

  18. Precise measurement of the top quark mass in dilepton decays using optimized neutrino weighting

    SciTech Connect

    Abazov, Victor Mukhamedovich

    2015-11-11

    We measure the top quark mass in dilepton final states of tt¯ events in pp¯ collisions at √s= 1.96 TeV, using data corresponding to an integrated luminosity of 9.7 fb-1 at the Fermilab Tevatron Collider. The analysis features a comprehensive optimization of the neutrino weighting method to minimize the statistical uncertainties. Furthermore, we improve the calibration of jet energies using the calibration determined in tt¯ → lepton + jets events, which reduces the otherwise limiting systematic uncertainty from the jet energy scale. As a result, the measured top quark mass is mt = 173.32±1.36(stat)±0.85(syst) GeV.

  19. Precise measurement of the top quark mass in dilepton decays using optimized neutrino weighting

    DOE PAGESBeta

    Abazov, Victor Mukhamedovich

    2015-11-11

    We measure the top quark mass in dilepton final states of tt¯ events in pp¯ collisions at √s= 1.96 TeV, using data corresponding to an integrated luminosity of 9.7 fb-1 at the Fermilab Tevatron Collider. The analysis features a comprehensive optimization of the neutrino weighting method to minimize the statistical uncertainties. Furthermore, we improve the calibration of jet energies using the calibration determined in tt¯ → lepton + jets events, which reduces the otherwise limiting systematic uncertainty from the jet energy scale. As a result, the measured top quark mass is mt = 173.32±1.36(stat)±0.85(syst) GeV.

  20. Calibration of the Top-Quark Monte Carlo Mass.

    PubMed

    Kieseler, Jan; Lipka, Katerina; Moch, Sven-Olaf

    2016-04-22

    We present a method to establish, experimentally, the relation between the top-quark mass m_{t}^{MC} as implemented in Monte Carlo generators and the Lagrangian mass parameter m_{t} in a theoretically well-defined renormalization scheme. We propose a simultaneous fit of m_{t}^{MC} and an observable sensitive to m_{t}, which does not rely on any prior assumptions about the relation between m_{t} and m_{t}^{MC}. The measured observable is independent of m_{t}^{MC} and can be used subsequently for a determination of m_{t}. The analysis strategy is illustrated with examples for the extraction of m_{t} from inclusive and differential cross sections for hadroproduction of top quarks. PMID:27152794

  1. An informatic framework for decoding protein complexes by top-down mass spectrometry

    PubMed Central

    Skinner, Owen S.; Havugimana, Pierre C.; Haverland, Nicole A.; Fornelli, Luca; Early, Bryan P.; Greer, Joseph B.; Fellers, Ryan T.; Durbin, Kenneth R.; Do Vale, Luis H. F.; Melani, Rafael D.; Seckler, Henrique S.; Nelp, Micah T.; Belov, Mikhail E.; Horning, Stevan R.; Makarov, Alexander A.; LeDuc, Richard D.; Bandarian, Vahe; Compton, Philip D.; Kelleher, Neil L.

    2015-01-01

    Efforts to map the human protein interactome have resulted in information about hundreds to thousands of multi-protein assemblies housed in public repositories, but the molecular characterization and stoichiometry of their protein subunits remains largely unknown. Here, we combined the CORUM and UniProt databases to create candidates for an error-tolerant search engine designed for hierarchical top-down analyses, identification, and scoring of multi-proteoform complexes by native mass spectrometry. PMID:26780093

  2. An informatic framework for decoding protein complexes by top-down mass spectrometry.

    PubMed

    Skinner, Owen S; Havugimana, Pierre C; Haverland, Nicole A; Fornelli, Luca; Early, Bryan P; Greer, Joseph B; Fellers, Ryan T; Durbin, Kenneth R; Do Vale, Luis H F; Melani, Rafael D; Seckler, Henrique S; Nelp, Micah T; Belov, Mikhail E; Horning, Stevan R; Makarov, Alexander A; LeDuc, Richard D; Bandarian, Vahe; Compton, Philip D; Kelleher, Neil L

    2016-03-01

    Efforts to map the human protein interactome have resulted in information about thousands of multi-protein assemblies housed in public repositories, but the molecular characterization and stoichiometry of their protein subunits remains largely unknown. Here, we report a computational search strategy that supports hierarchical top-down analysis for precise identification and scoring of multi-proteoform complexes by native mass spectrometry. PMID:26780093

  3. Measurement of the Top Quark Mass Using the Invariant Mass of Lepton Pairs in Soft Muon b-tagged Events

    SciTech Connect

    Aaltonen, T.; Adelman, Jahred A.; Akimoto, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, Dante E.; Anastassov, A.; Annovi, Alberto; Antos, Jaroslav; Apollinari, G.; Apresyan, A.; /Purdue U. /Waseda U.

    2009-06-01

    We present the first measurement of the mass of the top quark in a sample of t{bar t} {yields} {ell}{bar {nu}}b{bar b}q{bar q} events (where {ell} = e, {mu}) selected by identifying jets containing a muon candidate from the semileptonic decay of heavy-flavor hadrons (soft muon b-tagging). The p{bar p} collision data used corresponds to an integrated luminosity of 2 fb{sup -1} and was collected by the CDF II detector at the Fermilab Tevatron. The measurement is based on a novel technique exploiting the invariant mass of a subset of the decay particles, specifically the lepton from the W boson of the t {yields} Wb decay, and the muon from a semileptonic b decay. We fit template histograms, derived from simulation of t{bar t} events and a modeling of the background, to the mass distribution observed in the data and measure a top quark mass of 180.5 {+-} 12.0(stat.) {+-} 3.6(syst.) GeV/c{sup 2}, consistent with the current world average.

  4. Measurement of the top quark mass in the all hadronic final state at the D0 experiment

    SciTech Connect

    Jayasinghe, Ayesh

    2013-01-01

    The top quark is the heaviest fermion observed to date. A precise measurement of its mass and W boson mass is important to indirect measurements of Higgs boson mass. Furthermore, the top quark mass, W boson mass and Higgs boson mass may test the Standard Model using the correlations between them. Here in this thesis, we present a measurement of the top quark mass in the all hadronic final state using the template method. This final state has the advantage of being fully reconstructed in the detector and having the largest branching fraction. The measurement is performed on 4033 candidate events collected using the DØ detector. The data is collected from pp collisions generated at √s =1.96 GeV by the TEVATRON accelerator, Fermi National Accelerator Laboratory, Batavia IL. This is a two dimensional measurement formulated to extract the top quark mass as well as lower the systematic uncertainty due to the jet energy scale calibration. A kinematic fitter is employed to build the templates of signal and background for various input top quark mass points and jet energy scale variations. These templates are compared to data to obtain the fitted top quark mass, jet energy scale shift and their uncertainties.

  5. Direct measurement of the top quark mass by the DØ Collaboration

    NASA Astrophysics Data System (ADS)

    Abbott, B.; Abolins, M.; Acharya, B. S.; Adam, I.; Adams, D. L.; Adams, M.; Ahn, S.; Aihara, H.; Alves, G. A.; Amos, N.; Anderson, E. W.; Astur, R.; Baarmand, M. M.; Baden, A.; Balamurali, V.; Balderston, J.; Baldin, B.; Banerjee, S.; Bantly, J.; Barberis, E.; Bartlett, J. F.; Bazizi, K.; Belyaev, A.; Beri, S. B.; Bertram, I.; Bezzubov, V. A.; Bhat, P. C.; Bhatnagar, V.; Bhattacharjee, M.; Biswas, N.; Blazey, G.; Blessing, S.; Bloom, P.; Boehnlein, A.; Bojko, N. I.; Borcherding, F.; Boswell, C.; Brandt, A.; Brock, R.; Bross, A.; Buchholz, D.; Burtovoi, V. S.; Butler, J. M.; Carvalho, W.; Casey, D.; Casilum, Z.; Castilla-Valdez, H.; Chakraborty, D.; Chang, S.-M.; Chekulaev, S. V.; Chen, L.-P.; Chen, W.; Choi, S.; Chopra, S.; Choudhary, B. C.; Christenson, J. H.; Chung, M.; Claes, D.; Clark, A. R.; Cobau, W. G.; Cochran, J.; Coney, L.; Cooper, W. E.; Cretsinger, C.; Cullen-Vidal, D.; Cummings, M. A.; Cutts, D.; Dahl, O. I.; Davis, K.; de, K.; del Signore, K.; Demarteau, M.; Denisov, D.; Denisov, S. P.; Diehl, H. T.; Diesburg, M.; di Loreto, G.; Draper, P.; Ducros, Y.; Dudko, L. V.; Dugad, S. R.; Edmunds, D.; Ellison, J.; Elvira, V. D.; Engelmann, R.; Eno, S.; Eppley, G.; Ermolov, P.; Eroshin, O. V.; Evdokimov, V. N.; Fahland, T.; Fatyga, M. K.; Feher, S.; Fein, D.; Ferbel, T.; Finocchiaro, G.; Fisk, H. E.; Fisyak, Y.; Flattum, E.; Forden, G. E.; Fortner, M.; Frame, K. C.; Fuess, S.; Gallas, E.; Galyaev, A. N.; Gartung, P.; Geld, T. L.; Genik, R. J.; Genser, K.; Gerber, C. E.; Gibbard, B.; Glenn, S.; Gobbi, B.; Goldschmidt, A.; Gómez, B.; Gómez, G.; Goncharov, P. I.; González Solís, J. L.; Gordon, H.; Goss, L. T.; Gounder, K.; Goussiou, A.; Graf, N.; Grannis, P. D.; Green, D. R.; Greenlee, H.; Grim, G.; Grinstein, S.; Grossman, N.; Grudberg, P.; Grünendahl, S.; Guglielmo, G.; Guida, J. A.; Guida, J. M.; Gupta, A.; Gurzhiev, S. N.; Gutierrez, P.; Gutnikov, Y. E.; Hadley, N. J.; Haggerty, H.; Hagopian, S.; Hagopian, V.; Hahn, K. S.; Hall, R. E.; Hanlet, P.; Hansen, S.; Hauptman, J. M.; Hedin, D.; Heinson, A. P.; Heintz, U.; Hernández-Montoya, R.; Heuring, T.; Hirosky, R.; Hobbs, J. D.; Hoeneisen, B.; Hoftun, J. S.; Hsieh, F.; Hu, Ting; Hu, Tong; Huehn, T.; Ito, A. S.; James, E.; Jaques, J.; Jerger, S. A.; Jesik, R.; Jiang, J. Z.-Y.; Joffe-Minor, T.; Johns, K.; Johnson, M.; Jonckheere, A.; Jones, M.; Jöstlein, H.; Jun, S. Y.; Jung, C. K.; Kahn, S.; Kalbfleisch, G.; Kang, J. S.; Karmanov, D.; Karmgard, D.; Kehoe, R.; Kelly, M. L.; Kim, C. L.; Kim, S. K.; Klatchko, A.; Klima, B.; Klopfenstein, C.; Klyukhin, V. I.; Kochetkov, V. I.; Kohli, J. M.; Koltick, D.; Kostritskiy, A. V.; Kotcher, J.; Kotwal, A. V.; Kourlas, J.; Kozelov, A. V.; Kozlovski, E. A.; Krane, J.; Krishnaswamy, M. R.; Krzywdzinski, S.; Kunori, S.; Lami, S.; Lander, R.; Landry, F.; Landsberg, G.; Lauer, B.; Leflat, A.; Li, H.; Li, J.; Li-Demarteau, Q. Z.; Lima, J. G.; Lincoln, D.; Linn, S. L.; Linnemann, J.; Lipton, R.; Liu, Y. C.; Lobkowicz, F.; Loken, S. C.; Lökös, S.; Lueking, L.; Lyon, A. L.; Maciel, A. K.; Madaras, R. J.; Madden, R.; Magaña-Mendoza, L.; Manankov, V.; Mani, S.; Mao, H. S.; Markeloff, R.; Marshall, T.; Martin, M. I.; Mauritz, K. M.; May, B.; Mayorov, A. A.; McCarthy, R.; McDonald, J.; McKibben, T.; McKinley, J.; McMahon, T.; Melanson, H. L.; Merkin, M.; Merritt, K. W.; Miettinen, H.; Mincer, A.; Mishra, C. S.; Mokhov, N.; Mondal, N. K.; Montgomery, H. E.; Mooney, P.; da Motta, H.; Murphy, C.; Nang, F.; Narain, M.; Narasimham, V. S.; Narayanan, A.; Neal, H. A.; Negret, J. P.; Nemethy, P.; Norman, D.; Oesch, L.; Oguri, V.; Oliveira, E.; Oltman, E.; Oshima, N.; Owen, D.; Padley, P.; Para, A.; Park, Y. M.; Partridge, R.; Parua, N.; Paterno, M.; Pawlik, B.; Perkins, J.; Peters, M.; Piegaia, R.; Piekarz, H.; Pischalnikov, Y.; Podstavkov, V. M.; Pope, B. G.; Prosper, H. B.; Protopopescu, S.; Qian, J.; Quintas, P. Z.; Raja, R.; Rajagopalan, S.; Ramirez, O.; Rasmussen, L.; Reucroft, S.; Rijssenbeek, M.; Rockwell, T.; Roco, M.; Roe, N. A.; Rubinov, P.; Ruchti, R.; Rutherfoord, J.; Sánchez-Hernández, A.; Santoro, A.; Sawyer, L.; Schamberger, R. D.; Schellman, H.; Sculli, J.; Shabalina, E.; Shaffer, C.; Shankar, H. C.; Shivpuri, R. K.; Shupe, M.; Singh, H.; Singh, J. B.; Sirotenko, V.; Smart, W.; Smith, E.; Smith, R. P.; Snihur, R.; Snow, G. R.; Snow, J.; Snyder, S.; Solomon, J.; Sood, P. M.; Sosebee, M.; Sotnikova, N.; Souza, M.; Spadafora, A. L.; Steinbrück, G.; Stephens, R. W.; Stevenson, M. L.; Stewart, D.; Stichelbaut, F.; Stoianova, D. A.; Stoker, D.; Strauss, M.; Streets, K.; Strovink, M.; Sznajder, A.; Tamburello, P.; Tarazi, J.; Tartaglia, M.; Thomas, T. L.; Thompson, J.; Trippe, T. G.; Tuts, P. M.; Varelas, N.; Varnes, E. W.; Vititoe, D.; Volkov, A. A.; Vorobiev, A. P.; Wahl, H. D.; Wang, G.; Warchol, J.; Watts, G.; Wayne, M.; Weerts, H.; White, A.; White, J. T.; Wightman, J. A.; Willis, S.; Wimpenny, S. J.; Wirjawan, J. V.; Womersley, J.; Won, E.; Wood, D. R.; Xu, H.; Yamada, R.; Yamin, P.; Yang, J.; Yasuda, T.; Yepes, P.; Yoshikawa, C.; Youssef, S.; Yu, J.; Yu, Y.; Zhu, Z. H.; Zieminska, D.; Zieminski, A.; Zverev, E. G.; Zylberstejn, A.

    1998-09-01

    We determine the top quark mass mt using tt¯ pairs produced in the DØ detector by s=1.8 TeV pp¯ collisions in a 125 pb-1 exposure at the Fermilab Tevatron. We make a two constraint fit to mt in tt¯-->bW+b¯W- final states with one W boson decaying to qq¯ and the other to eν or μν. Likelihood fits to the data yield mt(l+jets)=173.3+/-5.6 (stat) +/- 5.5 (syst) GeV/c2. When this result is combined with an analysis of events in which both W bosons decay into leptons, we obtain mt=172.1+/-5.2 (stat) +/- 4.9 (syst) GeV/c2. An alternate analysis, using three constraint fits to fixed top quark masses, gives mt(l+jets)=176.0+/-7.9 (stat)+/- 4.8 (syst) GeV/c2, consistent with the above result. Studies of kinematic distributions of the top quark candidates are also presented. 14.65.Ha, 13.85.Ni, 13.85.Qk

  6. Intact mass detection, interpretation, and visualization to automate Top-Down proteomics on a large scale

    PubMed Central

    Durbin, Kenneth R.; Tran, John C.; Zamdborg, Leonid; Sweet, Steve M. M.; Catherman, Adam D.; Lee, Ji Eun; Li, Mingxi; Kellie, John F.; Kelleher, Neil L.

    2011-01-01

    Applying high-throughput Top-Down MS to an entire proteome requires a yet-to-be-established model for data processing. Since Top-Down is becoming possible on a large scale, we report our latest software pipeline dedicated to capturing the full value of intact protein data in automated fashion. For intact mass detection, we combine algorithms for processing MS1 data from both isotopically resolved (FT) and charge-state resolved (ion trap) LC-MS data, which are then linked to their fragment ions for database searching using ProSight. Automated determination of human keratin and tubulin isoforms is one result. Optimized for the intricacies of whole proteins, new software modules visualize proteome-scale data based on the LC retention time and intensity of intact masses and enable selective detection of PTMs to automatically screen for acetylation, phosphorylation, and methylation. Software functionality was demonstrated using comparative LC-MS data from yeast strains in addition to human cells undergoing chemical stress. We further these advances as a key aspect of realizing Top-Down MS on a proteomic scale. PMID:20848673

  7. Measurement of the Top Quark Mass at CDF Using the Template Method in the Lepton + Jets Channel

    SciTech Connect

    Adelman, Jahred A.

    2008-06-01

    A measurement of the top quark mass in p$\\bar{p}$ collisions at √s = 1.96 TeV is presented. The analysis uses a template method, in which the overconstrained kinematics of the Lepton+Jets channel of the t$\\bar{t}$ system are used to measure a single quantity, the reconstructed top quark mass, that is strongly correlated with the true top quark mass. in addition, the dijet mass of the hadronically decaying W boson is used to constrain in situ the uncertain jet energy scale in the CDF detector. Two-dimensional probability density functions are derived using a kernel density estimate-based machinery. Using 1.9 fb-1 of data, the top quark mass is measured to be 171.8$+1.9\\atop{-1.9}$(stat.) ± 1.0(syst.)GeV/c2.

  8. Precise measurement of the top-quark mass in the lepton+jets topology at CDF II.

    PubMed

    Aaltonen, T; Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Behari, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carrillo, S; Carlsmith, D; Carosi, R; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Cilijak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; DaRonco, S; Datta, M; D'Auria, S; Davies, T; Dagenhart, D; de Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; De Lorenzo, G; Dell'Orso, M; Delli Paoli, F; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Dörr, C; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Forrest, R; Forrester, S; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garberson, F; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Group, R C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Hays, C; Heck, M; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jeon, E J; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kraan, A C; Kraus, J; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kulkarni, N P; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis, A; Margaroli, F; Marginean, R; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyamoto, A; Moed, S; Moggi, N; Mohr, B; Moon, C S; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shalhout, S Z; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuno, S; Tu, Y; Turini, N; Ukegawa, F; Uozumi, S; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vazquez, F; Velev, G; Vellidis, C; Veramendi, G; Veszpremi, V; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Vollrath, I; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, J; Wagner, W; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zhou, J; Zucchelli, S

    2007-11-01

    We present a measurement of the mass of the top quark from proton-antiproton collisions recorded at the CDF experiment in Run II of the Fermilab Tevatron. We analyze events from the single lepton plus jets final state (tt-->W(+)bW(-)b-->lnubqq'b). The top-quark mass is extracted using a direct calculation of the probability density that each event corresponds to the tt final state. The probability is a function of both the mass of the top quark and the energy scale of the calorimeter jets, which is constrained in situ by the hadronic W boson mass. Using 167 events observed in 955 pb(-1) of integrated luminosity, we achieve the single most precise measurement of the top-quark mass, 170.8+/-2.2(stat.)+/-1.4(syst.) GeV/c(2). PMID:17995397

  9. Apparent unitarity violation in high mass region of MbW from a "hidden" top partner at high energy colliders

    NASA Astrophysics Data System (ADS)

    Han, Chengcheng; Nojiri, Mihoko M.; Park, Myeonghun

    2016-09-01

    Perturbative unitarity conditions have been playing an important role in estimating the energy scale of new physics, including the Higgs mass as the most important example. In this letter, we show that there is a possibility to see the hint of a new physics (top quark partner) indirectly by observing an "apparent" unitarity violation in the distribution of invariant mass of b-jet and W-boson (Mbw) well above the mass of a top quark in a process of a heavy resonance decaying into a pair of top quarks.

  10. ProSight Lite: Graphical Software to Analyze Top-Down Mass Spectrometry Data

    PubMed Central

    Fellers, Ryan T.; Greer, Joseph B.; Early, Bryan P.; Yu, Xiang; LeDuc, Richard D.; Kelleher, Neil L.; Thomas, Paul M.

    2015-01-01

    Many top-down proteomics experiments focus on identifying and localizing post-translational modifications and other potential sources of “mass shift” on a known protein sequence. A simple application to match ion masses and facilitate the iterative hypothesis testing of PTM presence and location would assist with the data analysis in these experiments. ProSight Lite is a free software tool for matching a single candidate sequence against a set of mass spectrometric observations. Fixed or variable modifications, including both post-translational modifications and a select number of glycosylations, can be applied to the amino acid sequence. The application reports multiple scores and a matching fragment list. Fragmentation maps can be exported for publication in either PNG or SVG format. ProSight Lite can be freely downloaded from http://prosightlite.northwestern.edu, installs and updates from the web, and requires Windows 7 or higher. PMID:25828799

  11. ProSight Lite: graphical software to analyze top-down mass spectrometry data.

    PubMed

    Fellers, Ryan T; Greer, Joseph B; Early, Bryan P; Yu, Xiang; LeDuc, Richard D; Kelleher, Neil L; Thomas, Paul M

    2015-04-01

    Many top-down proteomics experiments focus on identifying and localizing PTMs and other potential sources of “mass shift” on a known protein sequence. A simple application to match ion masses and facilitate the iterative hypothesis testing of PTM presence and location would assist with the data analysis in these experiments. ProSight Lite is a free software tool for matching a single candidate sequence against a set of mass spectrometric observations. Fixed or variable modifications, including both PTMs and a select number of glycosylations, can be applied to the amino acid sequence. The application reports multiple scores and a matching fragment list. Fragmentation maps can be exported for publication in either portable network graphic (PNG) or scalable vector graphic (SVG) format. ProSight Lite can be freely downloaded from http://prosightlite.northwestern.edu, installs and updates from the web, and requires Windows 7 or a higher version. PMID:25828799

  12. Middle-down and Top-down mass spectrometric analysis of co-occurring histone modifications

    PubMed Central

    Molden, Rosalynn C; Garcia, Benjamin A

    2014-01-01

    Histones are chromatin proteins that are highly modified with many different types of post-translational modifications. These modifications act in concert to regulate a number of chromatin-related processes. However, identification and quantification of co-occurring histone post-translational modifications is challenging because there are many potential combinations of modifications and because the commonly used strategy of fragmenting proteins using trypsin or an alternative protease prior to LC-MS/MS analysis results in the loss of connectivity between modifications on different peptides. In this unit mass spectrometric methods to analyze combinatorial histone modifications on histone tails (Middle-down mass spectrometry) and on intact histones (Top-down mass spectrometry) are described. PMID:25081742

  13. Top-quark pole mass in the tadpole-free MS ¯ scheme

    NASA Astrophysics Data System (ADS)

    Martin, Stephen P.

    2016-05-01

    The complex pole mass of the top quark is presented at full two-loop order in the Standard Model, augmenting the known four-loop QCD contributions. The input parameters are the MS ¯ Yukawa and gauge couplings, the Higgs self-coupling, and the Higgs vacuum expectation value (VEV). Here, the VEV is defined as the minimum of the full effective potential in Landau gauge, so that tadpoles vanish. This is an alternative to earlier results that instead minimize the tree-level potential, resulting in a VEV that is gauge-fixing independent but accompanied by negative powers of the Higgs self-coupling in perturbative expansions. The effects of nonzero Goldstone boson mass are eliminated by resummation. I also study the renormalization scale dependence of the calculated pole mass.

  14. BCS instability and finite temperature corrections to tachyon mass in intersecting D1-branes

    NASA Astrophysics Data System (ADS)

    Chowdhury, Sudipto Paul; Sarkar, Swarnendu; Sathiapalan, B.

    2014-09-01

    A holographic description of BCS superconductivity is given in [1]. This model was constructed by insertion of a pair of D8-branes on a D4-background. The spectrum of intersecting D8-branes has tachyonic modes indicating an instability which is identified with the BCS instability in superconductors. Our aim is to study the stability of the intersecting branes under finite temperature effects. Many of the technical aspects of this problem are captured by a simpler problem of two intersecting D1-branes on flat background. In the simplified set-up we compute the one-loop finite temperature corrections to the tree-level tachyon mass-squared-squared using the frame-work of SU(2) Yang-Mills theory in (1 + 1)-dimensions. We show that the one-loop two-point functions are ultraviolet finite due to cancellation of ultraviolet divergence between the amplitudes containing bosons and fermions in the loop. The amplitudes are found to be infrared divergent due to the presence of massless fields in the loops. We compute the finite temperature mass-squared correction to all the massless fields and use these temperature dependent masses-squared to compute the tachyonic mass-squared correction. We show numerically the existence of a transition temperature at which the effective mass-squared of the tree-level tachyons becomes zero, thereby stabilizing the brane configuration.

  15. Effects of finite volume on the KL – KS mass difference

    DOE PAGESBeta

    Christ, N.  H.; Feng, X.; Martinelli, G.; Sachrajda, C.  T.

    2015-06-24

    Phenomena that involve two or more on-shell particles are particularly sensitive to the effects of finite volume and require special treatment when computed using lattice QCD. In this paper we generalize the results of Lüscher and Lellouch and Lüscher, which determine the leading-order effects of finite volume on the two-particle spectrum and two-particle decay amplitudes to determine the finite-volume effects in the second-order mixing of the K⁰ and K⁰⁻ states. We extend the methods of Kim, Sachrajda, and Sharpe to provide a direct, uniform treatment of these three, related, finite-volume corrections. In particular, the leading, finite-volume corrections to the KLmore » – KS mass difference ΔMK and the CP-violating parameter εK are determined, including the potentially large effects which can arise from the near degeneracy of the kaon mass and the energy of a finite-volume, two-pion state.« less

  16. Anomalous coupling, top-mass and parton-shower effects in W + W - production

    NASA Astrophysics Data System (ADS)

    Bellm, J.; Gieseke, S.; Greiner, N.; Heinrich, G.; Plätzer, S.; Reuschle, C.; von Soden-Fraunhofen, J. F.

    2016-05-01

    We calculate the process ppto {W}+{W}-to {e}+{ν}_e{μ}-{overline{ν}}_{μ } at NLO QCD, including also effective field theory (EFT) operators mediating the ggW + W - interaction, which first occur at dimension eight. We further combine the NLO and EFT matrix elements produced by G oS am with the H erwig7/M atchbox framework, which offers the possibility to study the impact of a parton shower. We assess the effects of the anomalous couplings by comparing them to top-mass effects as well as uncertainties related to variations of the renormalisation, factorisation and hard shower scales.

  17. Coupled porohyperelastic mass transport (PHEXPT) finite element models for soft tissues using ABAQUS.

    PubMed

    Vande Geest, Jonathan P; Simon, B R; Rigby, Paul H; Newberg, Tyler P

    2011-04-01

    Finite element models (FEMs) including characteristic large deformations in highly nonlinear materials (hyperelasticity and coupled diffusive/convective transport of neutral mobile species) will allow quantitative study of in vivo tissues. Such FEMs will provide basic understanding of normal and pathological tissue responses and lead to optimization of local drug delivery strategies. We present a coupled porohyperelastic mass transport (PHEXPT) finite element approach developed using a commercially available ABAQUS finite element software. The PHEXPT transient simulations are based on sequential solution of the porohyperelastic (PHE) and mass transport (XPT) problems where an Eulerian PHE FEM is coupled to a Lagrangian XPT FEM using a custom-written FORTRAN program. The PHEXPT theoretical background is derived in the context of porous media transport theory and extended to ABAQUS finite element formulations. The essential assumptions needed in order to use ABAQUS are clearly identified in the derivation. Representative benchmark finite element simulations are provided along with analytical solutions (when appropriate). These simulations demonstrate the differences in transient and steady state responses including finite deformations, total stress, fluid pressure, relative fluid, and mobile species flux. A detailed description of important model considerations (e.g., material property functions and jump discontinuities at material interfaces) is also presented in the context of finite deformations. The ABAQUS-based PHEXPT approach enables the use of the available ABAQUS capabilities (interactive FEM mesh generation, finite element libraries, nonlinear material laws, pre- and postprocessing, etc.). PHEXPT FEMs can be used to simulate the transport of a relatively large neutral species (negligible osmotic fluid flux) in highly deformable hydrated soft tissues and tissue-engineered materials. PMID:21428686

  18. “Proteotyping”: Population Proteomics of Human Leukocytes Using Top Down Mass Spectrometry

    PubMed Central

    Roth, Michael J.; Parks, Bryan A.; Ferguson, Jonathan T.; Boyne, Michael T.; Kelleher, Neil L.

    2008-01-01

    Characterizing combinations of coding polymorphisms (cSNPs), alternative splicing and post-translational modifications (PTMs) on a single protein by standard peptide-based proteomics is challenging owing to <100% sequence coverage and the uncoupling effect of proteolysis on such variations >10–20 residues apart. Because top down MS measures the whole protein, combinations of all the variations affecting primary sequence can be detected as they occur in combination. The protein form generated by all types of variation is here termed the “proteotype”, akin to a haplotype at the DNA level. Analysis of proteins from human primary leukocytes harvested from leukoreduction filters using a dual on-line/off-line top down MS strategy produced >600 unique intact masses, 133 of which were identified from 67 unique genes. Utilizing a two-dimensional platform, termed multidimensional protein characterization by automated top down (MudCAT), 108 of the above protein forms were subsequently identified in the absence of MS/MS in 4 days. Additionally, MudCAT enables the quantitation of allele ratios for heterozygotes and PTM occupancies for phosphorylated species. The diversity of the human proteome is embodied in the fact that 32 of the identified proteins harbored cSNPs, PTMs, or were detected as proteolysis products. Among the information were three partially phosphorylated proteins and three proteins heterozygous at known cSNP loci, with evidence for non-1:1 expression ratios obtained for different alleles. PMID:18351787

  19. Neutron-encoded mass signatures for quantitative top-down proteomics.

    PubMed

    Rhoads, Timothy W; Rose, Christopher M; Bailey, Derek J; Riley, Nicholas M; Molden, Rosalynn C; Nestler, Amelia J; Merrill, Anna E; Smith, Lloyd M; Hebert, Alexander S; Westphall, Michael S; Pagliarini, David J; Garcia, Benjamin A; Coon, Joshua J

    2014-03-01

    The ability to acquire highly accurate quantitative data is an increasingly important part of any proteomics experiment, whether shotgun or top-down approaches are used. We recently developed a quantitation strategy for peptides based on neutron encoding, or NeuCode SILAC, which uses closely spaced heavy isotope-labeled amino acids and high-resolution mass spectrometry to provide quantitative data. We reasoned that the strategy would also be applicable to intact proteins and could enable robust, multiplexed quantitation for top-down experiments. We used yeast lysate labeled with either (13)C6(15)N2-lysine or (2)H8-lysine, isotopologues of lysine that are spaced 36 mDa apart. Proteins having such close spacing cannot be distinguished during a medium resolution scan, but upon acquiring a high-resolution scan, the two forms of the protein with each amino acid are resolved and the quantitative information revealed. An additional benefit NeuCode SILAC provides for top down is that the spacing of the isotope peaks indicates the number of lysines present in the protein, information that aids in identification. We used NeuCode SILAC to quantify several hundred isotope distributions, manually identify and quantify proteins from 1:1, 3:1, and 5:1 mixed ratios, and demonstrate MS(2)-based quantitation using ETD. PMID:24475910

  20. Neutron-Encoded Mass Signatures for Quantitative Top-Down Proteomics∥

    PubMed Central

    2015-01-01

    The ability to acquire highly accurate quantitative data is an increasingly important part of any proteomics experiment, whether shotgun or top-down approaches are used. We recently developed a quantitation strategy for peptides based on neutron encoding, or NeuCode SILAC, which uses closely spaced heavy isotope-labeled amino acids and high-resolution mass spectrometry to provide quantitative data. We reasoned that the strategy would also be applicable to intact proteins and could enable robust, multiplexed quantitation for top-down experiments. We used yeast lysate labeled with either 13C615N2-lysine or 2H8-lysine, isotopologues of lysine that are spaced 36 mDa apart. Proteins having such close spacing cannot be distinguished during a medium resolution scan, but upon acquiring a high-resolution scan, the two forms of the protein with each amino acid are resolved and the quantitative information revealed. An additional benefit NeuCode SILAC provides for top down is that the spacing of the isotope peaks indicates the number of lysines present in the protein, information that aids in identification. We used NeuCode SILAC to quantify several hundred isotope distributions, manually identify and quantify proteins from 1:1, 3:1, and 5:1 mixed ratios, and demonstrate MS2-based quantitation using ETD. PMID:24475910

  1. Measurement of the top quark mass in the lepton+jets final state with the matrix element method

    SciTech Connect

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Agelou, M.; Aguilo, E.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; /Buenos Aires U. /Rio de Janeiro, CBPF /Sao Paulo, IFT /Alberta U. /Simon Fraser U. /York U., Canada /McGill U. /Hefei, CUST /Andes U., Bogota /Charles U. /Prague, Tech. U.

    2006-09-01

    We present a measurement of the top quark mass with the Matrix Element method in the lepton+jets final state. As the energy scale for calorimeter jets represents the dominant source of systematic uncertainty, the Matrix Element likelihood is extended by an additional parameter, which is defined as a global multiplicative factor applied to the standard energy scale. The top quark mass is obtained from a fit that yields the combined statistical and systematic jet energy scale uncertainty.

  2. Precise measurement of the top quark mass in the dilepton channel at D0.

    PubMed

    Abazov, V M; Abbott, B; Acharya, B S; Adams, M; Adams, T; Alexeev, G D; Alkhazov, G; Alton, A; Alverson, G; Alves, G A; Ancu, L S; Aoki, M; Arov, M; Askew, A; Åsman, B; Atramentov, O; Avila, C; BackusMayes, J; Badaud, F; Bagby, L; Baldin, B; Bandurin, D V; Banerjee, S; Barberis, E; Baringer, P; Barreto, J; Bartlett, J F; Bassler, U; Bazterra, V; Beale, S; Bean, A; Begalli, M; Begel, M; Belanger-Champagne, C; Bellantoni, L; Beri, S B; Bernardi, G; Bernhard, R; Bertram, I; Besançon, M; Beuselinck, R; Bezzubov, V A; Bhat, P C; Bhatnagar, V; Blazey, G; Blessing, S; Bloom, K; Boehnlein, A; Boline, D; Boos, E E; Borissov, G; Bose, T; Brandt, A; Brandt, O; Brock, R; Brooijmans, G; Bross, A; Brown, D; Brown, J; Bu, X B; Buehler, M; Buescher, V; Bunichev, V; Burdin, S; Burnett, T H; Buszello, C P; Calpas, B; Camacho-Pérez, E; Carrasco-Lizarraga, M A; Casey, B C K; Castilla-Valdez, H; Chakrabarti, S; Chakraborty, D; Chan, K M; Chandra, A; Chen, G; Chevalier-Théry, S; Cho, D K; Cho, S W; Choi, S; Choudhary, B; Cihangir, S; Claes, D; Clutter, J; Cooke, M; Cooper, W E; Corcoran, M; Couderc, F; Cousinou, M-C; Croc, A; Cutts, D; Das, A; Davies, G; De, K; de Jong, S J; De la Cruz-Burelo, E; Déliot, F; Demarteau, M; Demina, R; Denisov, D; Denisov, S P; Desai, S; Deterre, C; DeVaughan, K; Diehl, H T; Diesburg, M; Dominguez, A; Dorland, T; Dubey, A; Dudko, L V; Duggan, D; Duperrin, A; Dutt, S; Dyshkant, A; Eads, M; Edmunds, D; Ellison, J; Elvira, V D; Enari, Y; Evans, H; Evdokimov, A; Evdokimov, V N; Facini, G; Ferbel, T; Fiedler, F; Filthaut, F; Fisher, W; Fisk, H E; Fortner, M; Fox, H; Fuess, S; Garcia-Bellido, A; Gavrilov, V; Gay, P; Geng, W; Gerbaudo, D; Gerber, C E; Gershtein, Y; Ginther, G; Golovanov, G; Goussiou, A; Grannis, P D; Greder, S; Greenlee, H; Greenwood, Z D; Gregores, E M; Grenier, G; Gris, Ph; Grivaz, J-F; Grohsjean, A; Grünendahl, S; Grünewald, M W; Guillemin, T; Guo, F; Gutierrez, G; Gutierrez, P; Haas, A; Hagopian, S; Haley, J; Han, L; Harder, K; Harel, A; Hauptman, J M; Hays, J; Head, T; Hebbeker, T; Hedin, D; Hegab, H; Heinson, A P; Heintz, U; Hensel, C; Heredia-De la Cruz, I; Herner, K; Hesketh, G; Hildreth, M D; Hirosky, R; Hoang, T; Hobbs, J D; Hoeneisen, B; Hohlfeld, M; Hubacek, Z; Huske, N; Hynek, V; Iashvili, I; Illingworth, R; Ito, A S; Jabeen, S; Jaffré, M; Jamin, D; Jayasinghe, A; Jesik, R; Johns, K; Johnson, M; Johnston, D; Jonckheere, A; Jonsson, P; Joshi, J; Jung, A W; Juste, A; Kaadze, K; Kajfasz, E; Karmanov, D; Kasper, P A; Katsanos, I; Kehoe, R; Kermiche, S; Khalatyan, N; Khanov, A; Kharchilava, A; Kharzheev, Y N; Khatidze, D; Kirby, M H; Kohli, J M; Kozelov, A V; Kraus, J; Kulikov, S; Kumar, A; Kupco, A; Kurča, T; Kuzmin, V A; Kvita, J; Lammers, S; Landsberg, G; Lebrun, P; Lee, H S; Lee, S W; Lee, W M; Lellouch, J; Li, L; Li, Q Z; Lietti, S M; Lim, J K; Lincoln, D; Linnemann, J; Lipaev, V V; Lipton, R; Liu, Y; Liu, Z; Lobodenko, A; Lokajicek, M; Lopes de Sa, R; Lubatti, H J; Luna-Garcia, R; Lyon, A L; Maciel, A K A; Mackin, D; Madar, R; Magaña-Villalba, R; Malik, S; Malyshev, V L; Maravin, Y; Martínez-Ortega, J; McCarthy, R; McGivern, C L; Meijer, M M; Melnitchouk, A; Menezes, D; Mercadante, P G; Merkin, M; Meyer, A; Meyer, J; Miconi, F; Mondal, N K; Muanza, G S; Mulhearn, M; Nagy, E; Naimuddin, M; Narain, M; Nayyar, R; Neal, H A; Negret, J P; Neustroev, P; Novaes, S F; Nunnemann, T; Obrant, G; Orduna, J; Osman, N; Osta, J; Otero y Garzón, G J; Padilla, M; Pal, A; Parashar, N; Parihar, V; Park, S K; Parsons, J; Partridge, R; Parua, N; Patwa, A; Penning, B; Perfilov, M; Peters, K; Peters, Y; Petridis, K; Petrillo, G; Pétroff, P; Piegaia, R; Piper, J; Pleier, M-A; Podesta-Lerma, P L M; Podstavkov, V M; Polozov, P; Popov, A V; Prewitt, M; Price, D; Prokopenko, N; Protopopescu, S; Qian, J; Quadt, A; Quinn, B; Rangel, M S; Ranjan, K; Ratoff, P N; Razumov, I; Renkel, P; Rijssenbeek, M; Ripp-Baudot, I; Rizatdinova, F; Rominsky, M; Ross, A; Royon, C; Rubinov, P; Ruchti, R; Safronov, G; Sajot, G; Salcido, P; Sánchez-Hernández, A; Sanders, M P; Sanghi, B; Santos, A S; Savage, G; Sawyer, L; Scanlon, T; Schamberger, R D; Scheglov, Y; Schellman, H; Schliephake, T; Schlobohm, S; Schwanenberger, C; Schwienhorst, R; Sekaric, J; Severini, H; Shabalina, E; Shary, V; Shchukin, A A; Shivpuri, R K; Simak, V; Sirotenko, V; Skubic, P; Slattery, P; Smirnov, D; Smith, K J; Snow, G R; Snow, J; Snyder, S; Söldner-Rembold, S; Sonnenschein, L; Soustruznik, K; Stark, J; Stolin, V; Stoyanova, D A; Strauss, M; Strom, D; Stutte, L; Suter, L; Svoisky, P; Takahashi, M; Tanasijczuk, A; Taylor, W; Titov, M; Tokmenin, V V; Tsai, Y-T; Tsybychev, D; Tuchming, B; Tully, C; Uvarov, L; Uvarov, S; Uzunyan, S; Van Kooten, R; van Leeuwen, W M; Varelas, N; Varnes, E W; Vasilyev, I A; Verdier, P; Vertogradov, L S; Verzocchi, M; Vesterinen, M; Vilanova, D; Vokac, P; Wahl, H D; Wang, M H L S; Warchol, J; Watts, G; Wayne, M; Weber, M; Welty-Rieger, L; White, A; Wicke, D; Williams, M R J; Wilson, G W; Wobisch, M; Wood, D R; Wyatt, T R; Xie, Y; Xu, C; Yacoob, S; Yamada, R; Yang, W-C; Yasuda, T; Yatsunenko, Y A; Ye, Z; Yin, H; Yip, K; Youn, S W; Yu, J; Zelitch, S; Zhao, T; Zhou, B; Zhu, J; Zielinski, M; Zieminska, D; Zivkovic, L

    2011-08-19

    We measure the top quark mass (m(t)) in p ̄p collisions at a center of mass energy √s = 1.96 TeV using dilepton t ̄t→W(+)bW(-) ̄b→ℓ(+)ν(ℓ)bℓ(-) ̄ν(ℓ) ̄b events, where ℓ denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb(-1) collected with the D0 detector at the Fermilab Tevatron Collider. We obtain m(t)=174.0±1.8(stat)±2.4(syst) GeV, which is in agreement with the current world average m(t)=173.3±1.1 GeV. This is currently the most precise measurement of m(t) in the dilepton channel. PMID:21929164

  3. Top quark physics experimental results at the LHC: Cross section and mass measurements with the CMS experiment

    NASA Astrophysics Data System (ADS)

    Gallinaro, M.

    2016-07-01

    The top quark, the heaviest known elementary particle discovered at the Fermilab Tevatron almost exactly twenty years ago, has taken a central role in the study of fundamental interactions. Its large mass suggests that it may play a special role in Nature. With approximately 25fb-1 of data collected by the CMS experiments at the Large Hadron Collider in Run 1 (2010-2012), top quark physics is at a turning point from first studies to precision measurements with sensitivity to new physics processes. This report summarizes the latest experimental results on top quark production cross section and mass measurements.

  4. Characterization of Metallosupramolecular Polymers by Top-Down Multidimensional Mass Spectrometry Methods.

    PubMed

    Guo, Kai; Guo, Zaihong; Ludlow, James M; Xie, Tingzheng; Liao, Shengyun; Newkome, George R; Wesdemiotis, Chrys

    2015-09-01

    Top-down multidimensional mass spectrometry, interfacing electrospray ionization (ESI) with ion mobility mass spectrometry (IM-MS), and energy resolved (gradient) tandem mass spectrometry (gMS(2) ) are employed to characterize the stoichiometries, architectures, and intrinsic stabilities of coordinatively bound supramolecular polymers containing terpyridine functionalized ligands. As a soft ionization method, ESI prevents or minimizes unwanted assembly destruction. The IM dimension affords separation of the supramolecular ions by charge and collision cross-section (a function of size and shape). The mobility separated ions are subsequently identified by their mass-to-charge-ratios and isotope patterns in the orthogonal MS dimension. Finally, the gMS(2) dimension reveals bond breaking proclivities and disintegration pathways of the assemblies. The described methodology does not require high sample purity due to the dispersive nature of the IM and MS steps. Its utility is demonstrated with the comprehensive analysis of bisterpyridine-based metallomacrocycle mixtures and a tristerpyridine based complex with 3-D nanosphere-like architecture. PMID:26248126

  5. Measurement of the Top Quark Mass in the Di-lepton Channel using the Dalitz-Goldstein Method

    SciTech Connect

    Hare, Matthew Frederick

    2010-10-01

    This dissertation describes a measurement of the mass of the top quark using a method developed by G. Goldstein and R.H. Dalitz. It is based on 2.0 fb-1 of data collected by the Collider Detector Facility at Fermi National Accelerator Laboratories. Di-lepton events were observed from colliding protons with anti-protons with √s = 1.96 TeV in the Tevatron Collider. A total of 145 candidate events were observed with 49 expected to be from background. These events include two neutrinos which elude detection. The method begins by assuming an initial top quark mass and solves for the neutrino momenta using a geometrical construction. The method samples over a range of likely top quark masses choosing the most consistent mass via a likelihood function. An important distinguishing feature of this method from others is its lack of dependence on the missing transverse energy, a quantity that is poorly measured by the experiment. This analysis determines the top quark mass to be Mtop = 172.3 ± 3.4(stat.) ± 2.0(syst.) GeV/c2 (Mtop = 170.5 ± 3.7(stat.) ± 1.8(syst.) GeV/c2 with b-tagging).

  6. Top Quark Mass Measurement in the Lepton + Jets Channel Using a Matrix Element Method and \\textit{in situ} Jet Energy Calibration

    SciTech Connect

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Apresyan, A.; Arisawa, T.; /Waseda U. /Dubna, JINR

    2010-10-01

    A precision measurement of the top quark mass m{sub t} is obtained using a sample of t{bar t} events from p{bar p} collisions at the Fermilab Tevatron with the CDF II detector. Selected events require an electron or muon, large missing transverse energy, and exactly four high-energy jets, at least one of which is tagged as coming from a b quark. A likelihood is calculated using a matrix element method with quasi-Monte Carlo integration taking into account finite detector resolution and jet mass effects. The event likelihood is a function of m{sub t} and a parameter {Delta}{sub JES} used to calibrate the jet energy scale in situ. Using a total of 1087 events, a value of m{sub t} = 173.0 {+-} 1.2 GeV/c{sup 2} is measured.

  7. Top Quark Mass Measurement in the lepton+jets Channel Using a Matrix Element Method and in situ Jet Energy Calibration

    NASA Astrophysics Data System (ADS)

    Aaltonen, T.; Álvarez González, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Apresyan, A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bauer, G.; Bedeschi, F.; Beecher, D.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Binkley, M.; Bisello, D.; Bizjak, I.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brau, B.; Brigliadori, L.; Brisuda, A.; Bromberg, C.; Brucken, E.; Bucciantonio, M.; Budagov, J.; Budd, H. S.; Budd, S.; Burkett, K.; Busetto, G.; Bussey, P.; Buzatu, A.; Calancha, C.; Camarda, S.; Campanelli, M.; Campbell, M.; Canelli, F.; Canepa, A.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Carron, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Chlebana, F.; Cho, K.; Chokheli, D.; Chou, J. P.; Chung, W. H.; Chung, Y. S.; Ciobanu, C. I.; Ciocci, M. A.; Clark, A.; Compostella, G.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Crescioli, F.; Cuenca Almenar, C.; Cuevas, J.; Culbertson, R.; Dagenhart, D.; D'Ascenzo, N.; Datta, M.; de Barbaro, P.; de Cecco, S.; de Lorenzo, G.; Dell'Orso, M.; Deluca, C.; Demortier, L.; Deng, J.; Deninno, M.; Devoto, F.; D'Errico, M.; di Canto, A.; di Ruzza, B.; Dittmann, J. R.; D'Onofrio, M.; Donati, S.; Dong, P.; Dorigo, T.; Ebina, K.; Elagin, A.; Eppig, A.; Erbacher, R.; Errede, D.; Errede, S.; Ershaidat, N.; Eusebi, R.; Fang, H. C.; Farrington, S.; Feindt, M.; Fernandez, J. P.; Ferrazza, C.; Field, R.; Flanagan, G.; Forrest, R.; Frank, M. J.; Franklin, M.; Freeman, J. C.; Furic, I.; Gallinaro, M.; Galyardt, J.; Garcia, J. E.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Giannetti, P.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Giunta, M.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Goldschmidt, N.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Gresele, A.; Grinstein, S.; Grosso-Pilcher, C.; Group, R. C.; Guimaraes da Costa, J.; Gunay-Unalan, Z.; Haber, C.; Hahn, S. R.; Halkiadakis, E.; Hamaguchi, A.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, D.; Hare, M.; Harr, R. F.; Hatakeyama, K.; Hays, C.; Heck, M.; Heinrich, J.; Herndon, M.; Hewamanage, S.; Hidas, D.; Hocker, A.; Hopkins, W.; Horn, D.; Hou, S.; Hughes, R. E.; Hurwitz, M.; Husemann, U.; Hussain, N.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jha, M. K.; Jindariani, S.; Johnson, W.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kamon, T.; Karchin, P. E.; Kato, Y.; Ketchum, W.; Keung, J.; Khotilovich, V.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, H. W.; Kim, J. E.; Kim, M. J.; Kim, S. B.; Kim, S. H.; Kim, Y. K.; Kimura, N.; Kirby, M.; Klimenko, S.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Krop, D.; Krumnack, N.; Kruse, M.; Krutelyov, V.; Kuhr, T.; Kurata, M.; Kwang, S.; Laasanen, A. T.; Lami, S.; Lammel, S.; Lancaster, M.; Lander, R. L.; Lannon, K.; Lath, A.; Latino, G.; Lazzizzera, I.; Lecompte, T.; Lee, E.; Lee, H. S.; Lee, J. S.; Lee, S. W.; Leo, S.; Leone, S.; Lewis, J. D.; Lin, C.-J.; Linacre, J.; Lindgren, M.; Lipeles, E.; Lister, A.; Litvintsev, D. O.; Liu, C.; Liu, Q.; Liu, T.; Lockwitz, S.; Lockyer, N. S.; Loginov, A.; Lucchesi, D.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maeshima, K.; Makhoul, K.; Maksimovic, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, C.; Martínez, M.; Martínez-Ballarín, R.; Mastrandrea, P.; Mathis, M.; Mattson, M. E.; Mazzanti, P.; McFarland, K. S.; McIntyre, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Menzione, A.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Mondragon, M. N.; Moon, C. S.; Moore, R.; Morello, M. J.; Morlock, J.; Movilla Fernandez, P.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Neubauer, M. S.; Nielsen, J.; Nodulman, L.; Norniella, O.; Nurse, E.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagan Griso, S.; Pagliarone, C.; Palencia, E.; Papadimitriou, V.; Paramonov, A. A.; Patrick, J.; Pauletta, G.; Paulini, M.; Paus, C.; Pellett, D. E.; Penzo, A.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.

    2010-12-01

    A precision measurement of the top quark mass mt is obtained using a sample of tt¯ events from pp¯ collisions at the Fermilab Tevatron with the CDF II detector. Selected events require an electron or muon, large missing transverse energy, and exactly four high-energy jets, at least one of which is tagged as coming from a b quark. A likelihood is calculated using a matrix element method with quasi-Monte Carlo integration taking into account finite detector resolution and jet mass effects. The event likelihood is a function of mt and a parameter ΔJES used to calibrate the jet energy scale in situ. Using a total of 1087 events in 5.6fb-1 of integrated luminosity, a value of mt=173.0±1.2GeV/c2 is measured.

  8. Top Quark Mass Measurement in the lepton+jets Channel Using a Matrix Element Method and in situ Jet Energy Calibration

    SciTech Connect

    Aaltonen, T.; Brucken, E.; Devoto, F.; Mehtala, P.; Orava, R.; Alvarez Gonzalez, B.; Casal, B.; Gomez, G.; Palencia, E.; Rodrigo, T.; Ruiz, A.; Scodellaro, L.; Vila, I.; Vilar, R.; Amerio, S.; Dorigo, T.; Gresele, A.; Lazzizzera, I.; Amidei, D.; Campbell, M.

    2010-12-17

    A precision measurement of the top quark mass m{sub t} is obtained using a sample of tt events from pp collisions at the Fermilab Tevatron with the CDF II detector. Selected events require an electron or muon, large missing transverse energy, and exactly four high-energy jets, at least one of which is tagged as coming from a b quark. A likelihood is calculated using a matrix element method with quasi-Monte Carlo integration taking into account finite detector resolution and jet mass effects. The event likelihood is a function of m{sub t} and a parameter {Delta}{sub JES} used to calibrate the jet energy scale in situ. Using a total of 1087 events in 5.6 fb{sup -1} of integrated luminosity, a value of m{sub t}=173.0{+-}1.2 GeV/c{sup 2} is measured.

  9. Top-quark mass measurement in events with jets and missing transverse energy using the full CDF data set

    NASA Astrophysics Data System (ADS)

    Aaltonen, T.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Bae, T.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bedeschi, F.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brigliadori, L.; Bromberg, C.; Brucken, E.; Budagov, J.; Budd, H. S.; Burkett, K.; Busetto, G.; Bussey, P.; Butti, P.; Buzatu, A.; Calamba, A.; Camarda, S.; Campanelli, M.; Canelli, F.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Cho, K.; Chokheli, D.; Ciocci, M. A.; Clark, A.; Clarke, C.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Cremonesi, M.; Cruz, D.; Cuevas, J.; Culbertson, R.; d'Ascenzo, N.; Datta, M.; De Barbaro, P.; Demortier, L.; Deninno, M.; d'Errico, M.; Devoto, F.; Di Canto, A.; Di Ruzza, B.; Dittmann, J. R.; D'Onofrio, M.; Donati, S.; Dorigo, M.; Driutti, A.; Ebina, K.; Edgar, R.; Elagin, A.; Erbacher, R.; Errede, S.; Esham, B.; Eusebi, R.; Farrington, S.; Fernández Ramos, J. P.; Field, R.; Flanagan, G.; Forrest, R.; Franklin, M.; Freeman, J. C.; Frisch, H.; Funakoshi, Y.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González López, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Gramellini, E.; Grinstein, S.; Grosso-Pilcher, C.; Group, R. C.; Guimaraes da Costa, J.; Hahn, S. R.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, M.; Harr, R. F.; Harrington-Taber, T.; Hatakeyama, K.; Hays, C.; Heinrich, J.; Herndon, M.; Hocker, A.; Hong, Z.; Hopkins, W.; Hou, S.; Hughes, R. E.; Husemann, U.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jindariani, S.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kambeitz, M.; Kamon, T.; Karchin, P. E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, J. E.; Kim, M. J.; Kim, S. B.; Kim, S. H.; Kim, Y. J.; Kim, Y. K.; Kimura, N.; Kirby, M.; Knoepfel, K.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Kruse, M.; Kuhr, T.; Kurata, M.; Laasanen, A. T.; Lammel, S.; Lancaster, M.; Lannon, K.; Latino, G.; Lee, H. S.; Lee, J. S.; Leo, S.; Leone, S.; Lewis, J. D.; Limosani, A.; Lipeles, E.; Lister, A.; Liu, H.; Liu, Q.; Liu, T.; Lockwitz, S.; Loginov, A.; Lucà, A.; Lucchesi, D.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maestro, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, P.; Martínez, M.; Matera, K.; Mattson, M. E.; Mazzacane, A.; Mazzanti, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Moon, C. S.; Moore, R.; Morello, M. J.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Nigmanov, T.; Nodulman, L.; Noh, S. Y.; Norniella, O.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagliarone, C.; Palencia, E.; Palni, P.; Papadimitriou, V.; Parker, W.; Pauletta, G.; Paulini, M.; Paus, C.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Poprocki, S.; Potamianos, K.; Pranko, A.; Prokoshin, F.; Ptohos, F.; Punzi, G.; Ranjan, N.; Redondo Fernández, I.; Renton, P.; Rescigno, M.; Rimondi, F.; Ristori, L.; Robson, A.; Rodriguez, T.; Rolli, S.; Ronzani, M.; Roser, R.; Rosner, J. L.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Sakumoto, W. K.; Sakurai, Y.; Santi, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, E. E.; Schwarz, T.; Scodellaro, L.; Scuri, F.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shochet, M.; Shreyber-Tecker, I.; Simonenko, A.; Sinervo, P.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Song, H.; Sorin, V.; Stancari, M.; Denis, R. St.; Stelzer, B.; Stelzer-Chilton, O.; Stentz, D.; Strologas, J.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P. K.; Thom, J.; Thomson, E.; Thukral, V.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Ukegawa, F.; Uozumi, S.; Vázquez, F.; Velev, G.; Vellidis, C.; Vernieri, C.; Vidal, M.; Vilar, R.; Vizán, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wallny, R.; Wang, S. M.; Warburton, A.; Waters, D.; Wester, W. C., III; Whiteson, D.; Wicklund, A. B.; Wilbur, S.; Williams, H. H.; Wilson, J. S.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamato, D.; Yang, T.; Yang, U. K.; Yang, Y. C.; Yao, W.-M.; Yeh, G. P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Zanetti, A. M.; Zeng, Y.; Zhou, C.; Zucchelli, S.

    2013-07-01

    We present a measurement of the top-quark mass using the full data set of Tevatron s=1.96TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7fb-1. The analysis uses events with one semileptonic t or t¯ decay, but without detection of the electron or muon. We select events with significant missing transverse energy and multiple jets. We veto events containing identified electrons or muons. We obtain distributions of the top-quark masses and the invariant mass of the two jets from W-boson decays from data and compare these to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with in situ calibration. A likelihood fit of the templates from signal and background events to the data yields the top-quark mass, Mtop=173.93±1.64(stat)±0.87(syst)GeV/c2. This result is the most precise measurement to date of the mass of the top quark in this event topology.

  10. FEHMN 1.0: Finite element heat and mass transfer code; Revision 1

    SciTech Connect

    Zyvoloski, G.; Dash, Z.; Kelkar, S.

    1992-05-01

    A computer code is described which can simulate non-isothermal multi-phase multicomponent flow in porous media. It is applicable to natural-state studies of geothermal systems and groundwater flow. The equations of heat and mass transfer for multiphase flow in porous and permeable media are solved sing the finite element method. The permeability and porosity of the medium are allowed to depend on pressure and temperature. The code also has provisions for movable air and water phases and noncoupled tracers; that is, tracer solutions that do not affect the heat and mass transfer solutions. The tracers can be passive or reactive. The code can simulate two-dimensional, two-dimensional radial, or three-dimensional geometries. A summary of the equations in the model and the numerical solution procedure are provided in this report. A user`s guide and sample problems are also included. The FEHMN (Finite Element Heat and Mass Nuclear) code, described in this report, is a version of FEHM (Finite Element Heat and Mass, Zyvoloski et al., 1988) developed for the Yucca Mountain Site Characterization Project (YMP). The main use of FEHMN will be to assist in the understanding of flow fields in the saturated zone below the potential Yucca Mountain repository.

  11. Spin-polarized electron-hole quantum bilayers: finite layer width and mass-asymmetric effects

    NASA Astrophysics Data System (ADS)

    Gangadhar Nayak, Mukesh; Saini, Lalit Kumar

    2013-03-01

    The influence of mass-asymmetry and finite layer width in phase-transition from the liquid-state to the density-modulated ground-state of the spin-polarized electron-hole quantum bilayers (EHBL) is explored within the Singwi, Tosi, Land and Sjölander (qSTLS) approach. At the same number density of electrons and holes, in addition to the stronger interlayer correlations, the mass-asymmetry also shows stronger intralayer correlations in the hole layer than that of the electron layer. This change in the behaviour of correlations affects the ground-state of the spin-polarized EHBL system. Interestingly, we notice the enhancement of critical density for the onset of Wigner crystallization as compared to the recent results of spin-polarized mass-symmetric EHBL system. Pair-correlation function and local-field correction factor show a strong in-phase oscillations at the instability region. Further, we find that the inclusion of finite layer width weakens the intralayer correlations. As a result, the critical density for Wigner crystallization is lowered. The present results are compared with the recent results of spin-polarized (and unpolarized) mass-symmetric EHBL with zero (finite) layer width. Contribution to the Topical Issue "Excitonic Processes in Condensed Matter, Nanostructured and Molecular Materials", edited by Maria Antonietta Loi, Jasper Knoester and Paul H. M. van Loosdrecht.

  12. Higgs Boson Pair Production in Gluon Fusion at Next-to-Leading Order with Full Top-Quark Mass Dependence

    NASA Astrophysics Data System (ADS)

    Borowka, S.; Greiner, N.; Heinrich, G.; Jones, S. P.; Kerner, M.; Schlenk, J.; Schubert, U.; Zirke, T.

    2016-07-01

    We present the calculation of the cross section and invariant mass distribution for Higgs boson pair production in gluon fusion at next-to-leading order (NLO) in QCD. Top-quark masses are fully taken into account throughout the calculation. The virtual two-loop amplitude has been generated using an extension of the program GoSam supplemented with an interface to Reduze for the integral reduction. The occurring integrals have been calculated numerically using the program SecDec. Our results, including the full top-quark mass dependence for the first time, allow us to assess the validity of various approximations proposed in the literature, which we also recalculate. We find substantial deviations between the NLO result and the different approximations, which emphasizes the importance of including the full top-quark mass dependence at NLO.

  13. Higgs Boson Pair Production in Gluon Fusion at Next-to-Leading Order with Full Top-Quark Mass Dependence.

    PubMed

    Borowka, S; Greiner, N; Heinrich, G; Jones, S P; Kerner, M; Schlenk, J; Schubert, U; Zirke, T

    2016-07-01

    We present the calculation of the cross section and invariant mass distribution for Higgs boson pair production in gluon fusion at next-to-leading order (NLO) in QCD. Top-quark masses are fully taken into account throughout the calculation. The virtual two-loop amplitude has been generated using an extension of the program GoSam supplemented with an interface to Reduze for the integral reduction. The occurring integrals have been calculated numerically using the program SecDec. Our results, including the full top-quark mass dependence for the first time, allow us to assess the validity of various approximations proposed in the literature, which we also recalculate. We find substantial deviations between the NLO result and the different approximations, which emphasizes the importance of including the full top-quark mass dependence at NLO. PMID:27419563

  14. Web and database software for identification of intact proteins using "top down" mass spectrometry.

    PubMed

    Taylor, Gregory K; Kim, Yong-Bin; Forbes, Andrew J; Meng, Fanyu; McCarthy, Ryan; Kelleher, Neil L

    2003-08-15

    For the identification and characterization of proteins harboring posttranslational modifications (PTMs), a "top down" strategy using mass spectrometry has been forwarded recently but languishes without tailored software widely available. We describe a Web-based software and database suite called ProSight PTM constructed for large-scale proteome projects involving direct fragmentation of intact protein ions. Four main components of ProSight PTM are a database retrieval algorithm (Retriever), MySQL protein databases, a file/data manager, and a project tracker. Retriever performs probability-based identifications from absolute fragment ion masses, automatically compiled sequence tags, or a combination of the two, with graphical rendering and browsing of the results. The database structure allows known and putative protein forms to be searched, with prior or predicted PTM knowledge used during each search. Initial functionality is illustrated with a 36-kDa yeast protein identified from a processed cell extract after automated data acquisition using a quadrupole-FT hybrid mass spectrometer. A +142-Da delta(m) on glyceraldehyde-3-phosphate dehydrogenase was automatically localized between Asp90 and Asp192, consistent with its two cystine residues (149 and 153) alkylated by acrylamide (+71 Da each) during the gel-based sample preparation. ProSight PTM is the first search engine and Web environment for identification of intact proteins (https://prosightptm.scs.uiuc.edu/). PMID:14632120

  15. Precision measurement of the top quark mass from dilepton events at CDF II

    SciTech Connect

    Abulencia, A.; Adelman, J.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; Annovi, A.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Bologna U. /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara

    2006-12-01

    We report a measurement of the top quark mass, M{sub t}, in the dilepton decay channel of t{bar t} {yields} b{ell}{prime}{sup +} {nu}{sub {ell}}, {bar b}{ell}{sup -}{bar {nu}}{sub {ell}} using an integrated luminosity of 1.0 fb{sup -1} of p{bar p} collisions collected with the CDF II detector. We apply a method that convolutes a leading-order matrix element with detector resolution functions to form event-by-event likelihoods; we have enhanced the leading-order description to describe the effects of initial-state radiation. The joint likelihood is the product of the likelihoods from 78 candidate events in this sample, which yields a measurement of M{sub t} = 164.5 {+-} 3.9(stat.) {+-} 3.9(syst.) GeV/c{sup 2}, the most precise measurement of M{sub t} in the dilepton channel.

  16. Glycosylation characterization of therapeutic mAbs by top- and middle-down mass spectrometry

    PubMed Central

    Tran, Bao Quoc; Barton, Christopher; Feng, Jinhua; Sandjong, Aimee; Yoon, Sung Hwan; Awasthi, Shivangi; Liang, Tao; Khan, Mohd M.; Kilgour, David P.A.; Goodlett, David R.; Goo, Young Ah

    2015-01-01

    A reference monoclonal antibody IgG1 and a fusion IgG protein were analyzed by top- and middle-down mass spectrometry with multiple fragmentation techniques including electron transfer dissociation (ETD) and matrix-assisted laser desorption ionization in-source decay (MALDI-ISD) to investigate heterogeneity of glycosylated protein species. Specifically, glycan structure, sites, relative abundance levels, and termini structural conformation were investigated by use of Fourier transform ion cyclotron resonance (FT-ICR) or high performance liquid chromatography electrospray ionization (HPLC-ESI) linked to an Orbitrap. Incorporating a limited enzymatic digestion by immunoglobulin G-degrading enzyme Streptococcus pyogenes (IdeS) with MALDI-ISD analysis extended sequence coverage of the internal region of the proteins without pre-fractionation. The data in this article is associated with the research article published in Journal of Proteomics (Tran et al., 2015) [1]. PMID:26793758

  17. Dissecting Human Skeletal Muscle Troponin Proteoforms by Top-down Mass Spectrometry

    PubMed Central

    Chen, Yi-Chen; Sumandea, Marius P.; Larsson, Lars; Moss, Richard L.; Ge, Ying

    2015-01-01

    Skeletal muscles are the most abundant tissues in the human body. They are composed of a heterogeneous collection of muscle fibers that perform various functions. Skeletal muscle troponin (sTn) regulates skeletal muscle contraction and relaxation. sTn consists of 3 subunits, troponin I (TnI), troponin T (TnT), and troponin C (TnC). TnI inhibits the actomyosin Mg2+-ATPase, TnC binds Ca2+, and TnT is the tropomyosin (Tm)-binding subunit. The cardiac and skeletal isoforms of Tn share many similarities but the roles of modifications of Tn in the two muscles may differ. The modifications of cardiac Tn are known to alter muscle contractility and have been well-characterized. However, the modification status of sTn remains unclear. Here, we have employed top-down mass spectrometry (MS) to decipher the modifications of human sTnT and sTnI. We have extensively characterized sTnT and sTnI proteoforms, including alternatively spliced isoforms and post-translationally modified forms, found in human skeletal muscle with high mass accuracy and comprehensive sequence coverage. Moreover, we have localized the phosphorylation site of slow sTnT isoform III to Ser1 by tandem MS with electron capture dissociation. This is the first study to comprehensively characterize human sTn and also the first to identify the basal phosphorylation site for human sTnT by top-down MS. PMID:25613324

  18. A finite element method for transient analysis of concurrent large deformation and mass transport in gels

    NASA Astrophysics Data System (ADS)

    Zhang, Jiaping; Zhao, Xuanhe; Suo, Zhigang; Jiang, Hanqing

    2009-05-01

    A gel is an aggregate of polymers and solvent molecules. The polymers crosslink into a three-dimensional network by strong chemical bonds and enable the gel to retain its shape after a large deformation. The solvent molecules, however, interact among themselves and with the network by weak physical bonds and enable the gel to be a conduit of mass transport. The time-dependent concurrent process of large deformation and mass transport is studied by developing a finite element method. We combine the kinematics of large deformation, the conservation of the solvent molecules, the conditions of local equilibrium, and the kinetics of migration to evolve simultaneously two fields: the displacement of the network and the chemical potential of the solvent. The finite element method is demonstrated by analyzing several phenomena, such as swelling, draining and buckling. This work builds a platform to study diverse phenomena in gels with spatial and temporal complexity.

  19. A parallel algorithm for generation and assembly of finite element stiffness and mass matrices

    NASA Technical Reports Server (NTRS)

    Storaasli, O. O.; Carmona, E. A.; Nguyen, D. T.; Baddourah, M. A.

    1991-01-01

    A new algorithm is proposed for parallel generation and assembly of the finite element stiffness and mass matrices. The proposed assembly algorithm is based on a node-by-node approach rather than the more conventional element-by-element approach. The new algorithm's generality and computation speed-up when using multiple processors are demonstrated for several practical applications on multi-processor Cray Y-MP and Cray 2 supercomputers.

  20. Finite Number of Kaluza-Klein Modes, all with Zero Masses

    NASA Astrophysics Data System (ADS)

    Erdem, Recai

    Kaluza-Klein modes of fermions in a five-dimensional toy model are considered. The number of Kaluza-Klein modes that survive after integration over extra dimensions is finite in this space. Moreover, the extra dimensional piece of the kinetic part of the Lagrangian in this space induces no mass for the higher Kaluza-Klein modes on contrary to the standard lore.

  1. NEGATIVE ION ELECTROSPRAY OF BROMO- AND CHLORACETIC ACIDS AND AN EVALUATION OF EXACT MASS MEASUREMENTS WITH A BENCH-TOP TIME-OF-FLIGHT MASS SPECTROMETER

    EPA Science Inventory

    The negative ion electrospray mass spectra of six bromo- and chloroacetic acids were measured using two different electrospray interfaces and single quadrupole and bench-top time-of-flight mass spectrometers. With each acid at 50 ug/mL in aqueous methanol at pH 10, the anions ob...

  2. CDF measurement of the top quark mass in the lepton + jets channel using the multivariate template method

    SciTech Connect

    Freeman, John; /Fermilab

    2004-12-01

    The authors measure the mass of the top quark using 162 pb{sup -1} of data collected by the CDF experiment at FNAL in Run II. The decay chain t{bar t} {yields} bq{bar q}{bar b}lv is studied using a novel technique called the Multivariate Template Method (MTM). Using this technique they obtain a result of M{sub top} = 179.6{sub -6.3}{sup +6.4} {+-} 6.8 GeV/c{sup 2} for the top quark.

  3. Measurement of the Top Quark Mass in the Lepton+Jets Channel Using the Lepton Transverse Momentum

    SciTech Connect

    Aaltonen, T.; Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Apresyan, A.; /Purdue U. /Waseda U. /Dubna, JINR

    2011-01-01

    This letter reports a measurement of the top quark mass, M{sub top}, in data from p{bar p} collisions at {radical}s = 1.96 TeV corresponding to 2.7 fb{sup -1} of integrated luminosity at the Fermilab Tevatron using the CDF II detector. Events with the lepton+jets topology are selected. An unbinned likelihood is constructed based on the dependence of the lepton transverse momentum, P{sub T}, on M{sub top}. A maximum likelihood fit to the data yields a measured mass M{sub top} = 176.9 {+-} 8.0{sub stat} {+-} 2.7{sub syst} GeV/c{sup 2}. In this measurement, the contribution by the jet energy scale uncertainty to the systematic error is negligible. The result provides an important consistency test for other M{sub top} measurements where explicit use of the jet energy is made for deriving the top quark mass.

  4. Measurement of the top quark mass in the dilepton channel using the neutrino weighting algorithm at CDF II

    NASA Astrophysics Data System (ADS)

    Sabik, Simon

    We measure the top quark mass using approximately 359 pb-1 of data from pp¯ collisions at s = 1.96 GeV at CDF Run II. We select tt¯ candidates that are consistent with two W bosons decaying to a charged lepton and a neutrino following tt¯ → W+W-bb¯ → l+l- nn¯ bb¯. Only one of the two charged leptons is required to be identified as an electron or a muon candidate, while the other is simply a well measured track. We use a neutrino weighting algorithm which weighs each possibility of neutrino direction to reconstruct a top quark mass in each event. We compare the resulting distribution to Monte Carlo templates to obtain a top quark mass of 170.8+6.9-6.5 (stat) +/- 4.6 (syst) GeV/c 2.

  5. Does deamidation cause protein unfolding? A top-down tandem mass spectrometry study

    PubMed Central

    Soulby, Andrew J; Heal, Jack W; Barrow, Mark P; Roemer, Rudolf A; O'Connor, Peter B

    2015-01-01

    Deamidation is a nonenzymatic post-translational modification of asparagine to aspartic acid or glutamine to glutamic acid, converting an uncharged amino acid to a negatively charged residue. It is plausible that deamidation of asparagine and glutamine residues would result in disruption of a proteins' hydrogen bonding network and thus lead to protein unfolding. To test this hypothesis Calmodulin and B2M were deamidated and analyzed using tandem mass spectrometry on a Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS). The gas phase hydrogen bonding networks of deamidated and nondeamidated protein isoforms were probed by varying the infra-red multi-photon dissociation laser power in a linear fashion and plotting the resulting electron capture dissociation fragment intensities as a melting curve at each amino acid residue. Analysis of the unfolding maps highlighted increased fragmentation at lower laser powers localized around heavily deamidated regions of the proteins. In addition fragment intensities were decreased across the rest of the proteins which we propose is because of the formation of salt-bridges strengthening the intramolecular interactions of the central regions. These results were supported by a computational flexibility analysis of the mutant and unmodified proteins, which would suggest that deamidation can affect the global structure of a protein via modification of the hydrogen bonding network near the deamidation site and that top down FTICR-MS is an appropriate technique for studying protein folding. PMID:25653127

  6. Daylighting and Cooling of Atrium Buildings in Warm Climates: Impact of the Top-Fenestration and Wall Mass Area.

    NASA Astrophysics Data System (ADS)

    Atif, Morad Rachid

    1992-01-01

    Sun-lighting and daylighting contribute greatly to the aesthetic value of an atrium. However, today's atria are often found either over-lit with extensive cooling loads, or under-lit requiring increased artificial lighting loads. The increase of the top-glazing area increases the cooling loads and decreases the lighting loads. The increase of the mass in the atrium walls decreases the maximum atrium temperature and the cooling loads. Furthermore, the mass distribution and its reflectance affect the lighting levels at the atrium floor. The purpose of this study is to investigate the simultaneous impact of the top-fenestration and the mass and reflectance of atrium walls on the cooling and daylighting performance of atria in warm climates. It attempts to determine the optimum top-fenestration for efficient daylighting and low cooling loads. The daylighting performance was evaluated through illumination measurements in physical models in a sky simulator. The cooling performance was evaluated using the software TRNSYS 13.1. Two types of top-fenestration were tested: horizontal and vertical south-facing, each with three alternate areas. The variations of the atrium walls included materials (standard frame and heavyweight concrete) and percentage and reflectance of the solid area. Two and four-story atria were considered, each with square and linear configuration. The performance was evaluated for three warm climates. The optimum top-fenestration for efficient daylighting was determined. The daylighting prediction algorithm was extended to include the effective reflectance of the atrium walls. The increase of mass in the atrium walls significantly decreased the atrium temperature range, the maximum atrium temperature, and the cooling loads. This impact decreased from horizontal to vertical south-facing top-glazing. The vertical south-facing top-glazing and, to a lesser degree, the reduction of the glazed atrium cover by 50% had more cooling benefits than increasing the

  7. Comprehensive Characterization of AMP-Activated Protein Kinase Catalytic Domain by Top-Down Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Yu, Deyang; Peng, Ying; Ayaz-Guner, Serife; Gregorich, Zachery R.; Ge, Ying

    2016-02-01

    AMP-activated protein kinase (AMPK) is a serine/threonine protein kinase that is essential in regulating energy metabolism in all eukaryotic cells. It is a heterotrimeric protein complex composed of a catalytic subunit (α) and two regulatory subunits (β and γ). C-terminal truncation of AMPKα at residue 312 yielded a protein that is active upon phosphorylation of Thr172 in the absence of β and γ subunits, which is refered to as the AMPK catalytic domain and commonly used to substitute for the AMPK heterotrimeric complex in in vitro kinase assays. However, a comprehensive characterization of the AMPK catalytic domain is lacking. Herein, we expressed a His-tagged human AMPK catalytic domin (denoted as AMPKΔ) in E. coli, comprehensively characterized AMPKΔ in its basal state and after in vitro phosphorylation using top-down mass spectrometry (MS), and assessed how phosphorylation of AMPKΔ affects its activity. Unexpectedly, we found that bacterially-expressed AMPKΔ was basally phosphorylated and localized the phosphorylation site to the His-tag. We found that AMPKΔ had noticeable basal activity and was capable of phosphorylating itself and its substrates without activating phosphorylation at Thr172. Moreover, our data suggested that Thr172 is the only site phosphorylated by its upstream kinase, liver kinase B1, and that this phosphorylation dramatically increases the kinase activity of AMPKΔ. Importantly, we demonstrated that top-down MS in conjunction with in vitro phosphorylation assay is a powerful approach for monitoring phosphorylation reaction and determining sequential order of phosphorylation events in kinase-substrate systems.

  8. Influence of head mass on temporo-parietal skull impact using finite element modeling.

    PubMed

    Sahoo, Debasis; Deck, Caroline; Yoganandan, Narayan; Willinger, Rémy

    2015-09-01

    The effect of head mass on its biomechanical response during lateral impact to the head is investigated in this computational study. The mass of the head of a state-of-the-art validated finite element head model is altered by ± 10 % from the base value of 4.7 kg. Numerical simulations of lateral head impacts for 30 cases (representing 15 human cadaver experiments × 2 mass configurations) are performed using the LS-DYNA solver at different velocities ranging from 2.4 to 6.5 m/s and three impacting conditions representing different stiffness and shapes of the contact/impact surfaces. Results are compared with the original model using the baseline head mass, thus resulting in a total of 45 simulations. Present findings show that the head mass has greater influence for peak interaction forces and the force has a greater dependency on stiffness of contact surface than the shape. Mass variations have also influence on skull strain energy. Regardless of increase/decrease in skull strain energy influenced by head mass variations used in the computational study, the 50 % fracture tolerance limit was unaltered, which was 544 mJ. The present study gives a better understanding of the mechanism of temporo-parietal skull impact. PMID:25863692

  9. Analytical solutions for a mass moving along a finite stretched string with random surface irregularities

    NASA Astrophysics Data System (ADS)

    Gao, Q.; Zhang, J.

    2016-06-01

    This paper derives the analytical solution for the stochastic analysis of a concentrated mass moving at a constant velocity along a finite stretched string with random surface irregularities. Firstly, the problem of computing the spectral power density (PSD) of the random response is transformed into the problem of computing the transient response of a concentrated mass moving at a constant velocity along a stretched string with harmonic random surface irregularities. Next, the analytical solutions of the contact force between the string and the mass are derived for harmonically varying surface irregularities. Finally, the PSDs of contact force and the displacement of the string are determined in terms of the PSD of the random surface irregularities. The analytical solutions cover all three cases of subsonic, sonic or supersonic velocities. The proposed method was verified based on a comparison with the semi-analytical method.

  10. Finite mass enhancement across bandwidth controlled Mott transition in NiS2-xSex

    NASA Astrophysics Data System (ADS)

    Han, Garam; Kyung, W. S.; Kim, Y. K.; Cheng, C. M.; Tsuei, K. D.; Lee, K. D.; Hur, N.; Kim, H.-D.; Kim, C.

    One of the most important and still debated issues in the strongly correlated electron systems is on the metal insulator transition (MIT) mechanism. In the bandwidth controlled Mott transition (BCMT) scenario, which Mott originally proposed, MIT occurs through a mass divergence in which the effective mass of the quasi-particle (QP) diverges approaching the MIT. The interpretation is supported by dynamic mean field theory (DMFT) model calculations. However, few direct observations have been made yet due to various experimental restrictions. In this talk, I present systematic angle resolved photoemission studies on the MIT in NiS2-xSex, which is a well-known BCMT material. We observed not only the bandwidth shrinkage but also the coherent quasi-particle peak (QP) which is not of the surface origin. In addition, we experimentally showed the mass of the QP remains finite approaching the MIT. This work was supported by IBS-R009-D1.

  11. Quantitative Analysis of Human Salivary Gland-Derived Intact Proteome Using Top-Down Mass Spectrometry

    SciTech Connect

    Wu, Si; Brown, Joseph N.; Tolic, Nikola; Meng, Da; Liu, Xiaowen; Zhang, Haizhen; Zhao, Rui; Moore, Ronald J.; Pevzner, Pavel A.; Smith, Richard D.; Pasa-Tolic, Ljiljana

    2014-05-31

    There are several notable challenges inherent to fully characterizing the entirety of the human saliva proteome using bottom-up approaches, including polymorphic isoforms, post-translational modifications, unique splice variants, deletions, and truncations. To address these challenges, we have developed a top-down based liquid chromatography-mass spectrometry (LC-MS) approach, which cataloged 20 major human salivary proteins with a total of 83 proteoforms, containing a broad range of post-translational modifications. Among these proteins, several previously reported disease biomarker proteins were identified at the intact protein level, such as beta-2 microglobulin (B2M). In addition, intact glycosylated proteoforms of several saliva proteins were also characterized, including intact N-glycosylated protein prolactin inducible protein (PIP) and O-glycosylated acidic protein rich protein (aPRP). These characterized proteoforms constitute an intact saliva proteoform database, which was used for quantitative comparison of intact salivary proteoforms among six healthy individuals. Human parotid (PS) and submandibular/sublingual gland (SMSL) secretion samples (2 μg of protein each) from six healthy individuals were compared using RPLC coupled with the 12T FTICR mass spectrometer. Significantly different protein and PTM patterns were resolved with high reproducibility between PS and SMSL glands. The results from this study provide further insight into the potential mechanisms of PTM pathways in oral glandular secretion, expanding our knowledge of this complex yet easily accessible fluid. Intact protein LC-MS approach presented herein can potentially be applied for rapid and accurate identification of biomarkers from only a few microliters of human glandular saliva.

  12. Top Quark Mass Measurement in the Lepton plus Jets Channel Using a Modified Matrix Element Method

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Akimoto, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Apresyan, A.; /Purdue U. /Waseda U.

    2008-12-01

    The authors report a measurement of the top quark mass, m{sub t}, obtained from p{bar p} collisions at {radical}s = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. They analyze a sample corresponding to an integrated luminosity of 1.9 rfb{sup -1}. They select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. They calculate a signal likelihood using a matrix element integration method, where the matrix element is modified by using effective propagators to take into account assumptions on event kinematics. The event likelihood is a function of m{sub t} and a parameter JES that determines in situ the calibration of the jet energies. They use a neural network discriminant to distinguish signal from background events. They also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, they find m{sub t} = 172.7 {+-} 1.8 (stat. + JES) {+-} 1.2(syst.) GeV/c{sup 2}.

  13. The Mass of the Oppenheimer-Snyder Hole: Only Finite Mass Quasi-Black Holes

    NASA Astrophysics Data System (ADS)

    Mitra, Abhas; Singh, K. K.

    2013-07-01

    Oppenheimer and Snyder (OS) in their paper apparently showed the formation of an event horizon [see Eq. (37) in Phys. Rev.56 (1939) 455] for a collapsing homogeneous dust ball of mass M as the circumference radius of the outermost surface, rb → r0 = 2GM/c2 in a proper time $τ 0 ∝ r0-1/2 in the limit of large Schwarzschild time t → ∞. But Eq. (37) was approximated from Eq. (36) whose essential character is (t\\sim r_0 \\ln{\\sqrt y+1\\over \\sqrt y-1}$) where, at the boundary of the star y = rb/r0 = rbc2/2GM. And since the argument of a logarithmic function cannot be negative, one must have y ≥ 1 or 2GM/rbc2 ≤ 1. This shows that, at least, in this case (i) trapped surfaces are not formed, (ii) if the collapse indeed proceeds upto r = 0, we must have M = 0, and (iii) proper time taken for collapse τ → ∞. Thus, the gravitational mass of OS-black holes (OS-BHs), is unique and equal to zero. In fact, by invoking Birkhoff's theorem, it has been found that the OS collapse is only a fictitious mathematical artifact because it corresponds to a matter density ρ = 0 [Mitra, Astrophys. Space Sci.332 (2011) 43, arXiv:1101.0601]. Further, this is also in agreement with the proof that Schwarzschild BHs have the unique gravitational mass M = 0 [Mitra, J. Math. Phys.50 (2009), arXiv:0904.4754], and they represent asymptotic final state of physical collapse for which entire mass-energy is radiated out [Mitra and Glendenning, Mon. Not. R. Astron. Soc. Lett.404 (2010) L50, arXiv:1003.3518]. Finally this is in agreement with the conclusion that "the discussion of physical behavior of black holes, classical or quantum, is only of academic interest — we wonder whether nature allows gravitational collapse to continue inside the EH at all" [Narlikar and Padmanabhan, Found. Phys.18 (1989) 659, doi:10.1007/BF00734568].

  14. Up- and down-quark masses from finite-energy QCD sum rules to five loops

    SciTech Connect

    Dominguez, C. A.; Nasrallah, N. F.; Roentsch, R. H.; Schilcher, K.

    2009-01-01

    The up- and down-quark masses are determined from an optimized QCD finite-energy sum rule involving the correlator of axial-vector divergences, to five-loop order in perturbative QCD, and including leading nonperturbative QCD and higher order quark-mass corrections. This finite-energy sum rule is designed to reduce considerably the systematic uncertainties arising from the (unmeasured) hadronic resonance sector, which in this framework contributes less than 3-4% to the quark mass. This is achieved by introducing an integration kernel in the form of a second degree polynomial, restricted to vanish at the peak of the two lowest lying resonances. The driving hadronic contribution is then the pion pole, with parameters well known from experiment. The determination is done in the framework of contour improved perturbation theory, which exhibits a very good convergence, leading to a remarkably stable result in the unusually wide window s{sub 0}=1.0-4.0 GeV{sup 2}, where s{sub 0} is the radius of the integration contour in the complex energy (squared) plane. The results are m{sub u}(Q=2 GeV)=2.9{+-}0.2 MeV, m{sub d}(Q=2 GeV)=5.3{+-}0.4 MeV, and (m{sub u}+m{sub d})/2=4.1{+-}0.2 MeV (at a scale Q=2 GeV)

  15. Nano-LC FTICR tandem mass spectrometry for top-down proteomics: routine baseline unit mass resolution of whole cell lysate proteins up to 72 kDa.

    PubMed

    Tipton, Jeremiah D; Tran, John C; Catherman, Adam D; Ahlf, Dorothy R; Durbin, Kenneth R; Lee, Ji Eun; Kellie, John F; Kelleher, Neil L; Hendrickson, Christopher L; Marshall, Alan G

    2012-03-01

    Current high-throughput top-down proteomic platforms provide routine identification of proteins less than 25 kDa with 4-D separations. This short communication reports the application of technological developments over the past few years that improve protein identification and characterization for masses greater than 25 kDa. Advances in separation science have allowed increased numbers of proteins to be identified, especially by nanoliquid chromatography (nLC) prior to mass spectrometry (MS) analysis. Further, a goal of high-throughput top-down proteomics is to extend the mass range for routine nLC MS analysis up to 80 kDa because gene sequence analysis predicts that ~70% of the human proteome is transcribed to be less than 80 kDa. Normally, large proteins greater than 50 kDa are identified and characterized by top-down proteomics through fraction collection and direct infusion at relatively low throughput. Further, other MS-based techniques provide top-down protein characterization, however at low resolution for intact mass measurement. Here, we present analysis of standard (up to 78 kDa) and whole cell lysate proteins by Fourier transform ion cyclotron resonance mass spectrometry (nLC electrospray ionization (ESI) FTICR MS). The separation platform reduced the complexity of the protein matrix so that, at 14.5 T, proteins from whole cell lysate up to 72 kDa are baseline mass resolved on a nano-LC chromatographic time scale. Further, the results document routine identification of proteins at improved throughput based on accurate mass measurement (less than 10 ppm mass error) of precursor and fragment ions for proteins up to 50 kDa. PMID:22356091

  16. Using the Finite Elements Method (FEM) for Nanotechnology Education. A rectangular cantilever as a mass sensor

    NASA Astrophysics Data System (ADS)

    Aya Baquero, H.

    2015-01-01

    The Finite Element Method FEM can be used in the context of physics engineering education, particularly in nanotechnology training. Cantilevers and cantilevers arrays have been implemented as sensors within lots of applications. In the present paper, FEM was used to assess validity of basic models where cantilevers are used as mass sensors. Resonance frequency of a cantilever transversal vibration was found; this was a silicon one-side clamped cantilever. A number of minor mass elements Am was added on the cantilever's free side. Then in each case, a new resonance frequency was found; this led to obtain the Am values from shifts of resonance frequencies. Finally, those values were compared with CAD model values.

  17. The propagation and deposition process of a finite dry granular mass down a rough incline

    NASA Astrophysics Data System (ADS)

    Lee, Geng Lin; Yang, Fu-Ling

    2015-11-01

    This work presents a theoretical analysis on the propagation and arresting process of a 2 D finite granular mass in shallow configuration down a rough incline. The coherence-length constitutive model proposed by Ertas and Halsey (2002) is used to solve the bulk motion and local coherence length scale, l (x , t) , that characterizes internal granular clusters. Flow depth profile, h (x , t) , governed by an advection-diffusion equation is solved by the matched asymptotic method under shallowness and used to determine a flow front trajectory, xf (t) . The solutions reveal l (x , t) < h (x , t) in the front indicating the clusters can move freely and transport momentum flux in a flowing bulk. The trend of l (x , t) shows monotonic growing and becomes comparable to h (x , t) upstream, indicating clusters transmit basal decelerating impulse to decelerate the flow, giving rise to rear deposit. The critical location where l (x , t) = h (x , t) is solved to the leading order to determine a deposition front trajectory, xd (t) . Under the constraint of conserved total mass, finite run-out distance, Ld, and arrested time, Td, are estimated and used to construct a modified front propagation model, xfm (t) , which compares well to the experimental data reported in Pouliquen and Forterre (2002).

  18. Precision measurement of the top quark mass in the lepton + jets channel using a matrix element method with Quasi-Monte Carlo integration

    SciTech Connect

    Lujan, Paul Joseph

    2009-12-01

    This thesis presents a measurement of the top quark mass obtained from p$\\bar{p}$ collisions at √s = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. The measurement uses a matrix element integration method to calculate a t$\\bar{t}$ likelihood, employing a Quasi-Monte Carlo integration, which enables us to take into account effects due to finite detector angular resolution and quark mass effects. We calculate a t$\\bar{t}$ likelihood as a 2-D function of the top pole mass mt and ΔJES, where ΔJES parameterizes the uncertainty in our knowledge of the jet energy scale; it is a shift applied to all jet energies in units of the jet-dependent systematic error. By introducing ΔJES into the likelihood, we can use the information contained in W boson decays to constrain ΔJES and reduce error due to this uncertainty. We use a neural network discriminant to identify events likely to be background, and apply a cut on the peak value of individual event likelihoods to reduce the effect of badly reconstructed events. This measurement uses a total of 4.3 fb-1 of integrated luminosity, requiring events with a lepton, large ET, and exactly four high-energy jets in the pseudorapidity range |η| < 2.0, of which at least one must be tagged as coming from a b quark. In total, we observe 738 events before and 630 events after applying the likelihood cut, and measure mt = 172.6 ± 0.9 (stat.) ± 0.7 (JES) ± 1.1 (syst.) GeV/c2, or mt = 172.6 ± 1.6 (tot.) GeV/c2.

  19. Measurement of the top quark mass with a matrix element method in the lepton plus jets channel at CDF

    SciTech Connect

    Mohr, Brian; /UCLA

    2006-05-01

    The authors present a measurement of the mass of the top quark from p{bar p} collisions at 1.96 TeV observed with the Collider Detector at Fermilab (CDF) at the Fermilab Tevatron Run II. The events have the decay signature of p{bar p} {yields} t{bar t} in the lepton plus jets channel in which at least one jet is identified as coming from a secondary vertex and therefore a b-hadron. The largest systematic uncertainty, the jet energy scale (JES), is convoluted with the statistical error using an in-situ measurement of the hadronic W boson mass. They calculate a likelihood for each event using leading-order t{bar t} and W+jets cross-sections and parameterized parton showering. The final measured top quark mass and JES systematic is extracted from a joint likelihood of the product of individual event likelihoods. From 118 events observed in 680 pb{sup -1} of data, they measure a top quark mass of 174.09 {+-} 2.54 (stat+JES) {+-} 1.35(syst) GeV/c{sup 2}.

  20. Measurement of the mass of the top quark in dilepton final states with the D0 detector

    SciTech Connect

    Brandt, Oleg; /Bonn U.

    2006-08-01

    In the Standard Model (SM) the top quark mass is a fundamental parameter. Its precise measurement is important to test the self-consistency of the SM. Additionally, it offers sensitivity to New Physics beyond the Standard Model. In proton anti-proton collisions at a centre-of-mass energy of {radical}s = 1.96 TeV t{bar t} quarks are pair-produced, each decaying into a W boson and a b quark. In the dilepton channel both W bosons decay leptonically. Because of the presence of two neutrinos in the final state the kinematics are underconstrained. A so-called Neutrino Weighting algorithm is used to calculate a weight for the consistency of a hypothesized top quark mass with the event kinematics. To render the problem solvable, the pseudorapidities of the neutrinos are assumed. The Maximum Method, which takes the maximum to the weight distribution as input to infer the top quark mass, is applied to approximately 370 pb{sup -1} of Run-II data, recorded by the D0 experiment at the Tevatron. The e{mu}-channel of the 835 pb{sup -1} dataset is analyzed.

  1. Measurement of the top quark mass with the matrix element method in the semileptonic decay channel at D0

    SciTech Connect

    Haefner, Petra

    2008-07-31

    The top quark plays a special role in the Standard Model of Particle Physics. With its enormous mass of about 170 GeV it is as heavy as a gold atom and is the only quark with a mass near the electroweak scale. Together with theW boson mass, the top quark mass allows indirect constraints on the mass of the hypothetical Higgs boson, which might hold the clue to the origin of mass. Top pair production with a semileptonic decay t $\\bar{t}$ →W±W b$\\bar{b}$ →q $\\bar{t}$lnb$\\bar{b}$ is the ”golden channel” for mass measurements, due to a large branching fraction and a relatively low background contamination compared to other decay channels. Top mass measurements based on this decay, performed with the matrix element method, have always been among the single best measurements in the world. In 2007, the top mass world average broke the 1% level of precision. Its measurement is no longer dominated by statistical but instead by systematic uncertainties. The reduction of systematic uncertainties has therefore become a key issue for further progress. This thesis introduces two new developments in the treatment of b jets. The first improvement is an optimization in the way b identification information is used. It leads to an enhanced separation between signal and background processes and reduces the statistical uncertainty by about 16%. The second improvement determines differences in the detector response and thus the energy scales of light jets and b jets. Thereby, it addresses the major source of systematic uncertainty in the latest top mass measurements. The method was validated on Monte Carlo events at the generator level, calibrated with fully simulated events, including detector simulation, and applied to D0 Run II data corresponding to 1 fb-1 of integrated luminosity. Possible sources of systematic uncertainties were studied. The top mass is measured to be: mt = (169.2±3.5(stat.)±1.0(syst.)) GeV . The

  2. Finite Difference Radiative Transfer Model Calculations Compared to Measurements at the Top and Bottom of the Atmosphere

    NASA Technical Reports Server (NTRS)

    LeCroy, Stuart R.; Whitlock, Charles H.; Suttles, John T.

    1997-01-01

    A finite difference radiative transfer program was developed to handle most anisotropic scattering and reflectance problems encountered in the Earth's atmospheric system. The model has been used to reproduce the radiance received by both satellite and ground based radiation measuring instruments. It accurately replicates the radiance measured by both narrow and wide field-of-view instruments with either narrow or broadband wavelength ranges located on the surface and at satellite altitudes. The output of the finite difference code is compared to the measurements by surface pyranometers and a spectroradiometer aboard a high flying aircraft. The program output is also compared to ERBE measurements aboard the ERBS and NOAA-9 satellites as well as the visible bands aboard the GOES-6 and GOES-7 satellites and AVHRR bands 1 and 2 of the NOAA-9 and NOAA-1 1 satellites. The model is within 0.2 % of the radiance received by pyranometers, within 0.6 % of the ERBE radiances, and within 3 % of the radiances measured by the visible bands of the GOES and NOAA AVHRR radiometers.

  3. Measurement of the top quark mass using the template method in the lepton plus jets channel with in situ W ---> j j calibration at CDF-II

    SciTech Connect

    Adelman, Jahred A.; Arguin, J.F.; Bellettini, G.; Brubaker, E.; Budagov, J.; Chlachidze, G.; Demortier, L.; Gibson, A.; Kim, S.; Kim, Y.K.; Maruyama, T.; Sato, K.; Shochet, M.; Sinervo, P.; Tomura, T.; Velev, G.; Xie, S.; Yang, U.K.; /Chicago U. /Toronto U. /INFN, Pisa /Dubna, JINR /Rockefeller U. /LBL, Berkeley /Tsukuba U. /Fermilab

    2006-05-01

    We report an updated measurement of the top quark mass in the lepton plus jets channel of t{bar t} events from p{bar p} collisions at {radical}s = 1.96 TeV. This measurement uses a dataset with integrated luminosity of 680 pb{sup -1}, containing 360 t{bar t} candidates separated into four subsamples. A top quark mass is reconstructed for each event by using energy and momentum constraints on the top quark pair decay products. We also employ the reconstructed mass of hadronic W boson decays W {yields} jj to constrain in situ the largest systematic uncertainty of the top quark mass measurement: the jet energy scale. Monte Carlo templates of the reconstructed top quark and W boson mass are produced as a function of the true top quark mass and the jet energy scale. The distribution of reconstructed top quark and W boson mass in the data are compared to the Monte Carlo templates using a likelihood fit to obtain: M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}.

  4. Modification of the finite element heat and mass transfer code (FEHMN) to model multicomponent reactive transport

    SciTech Connect

    Viswanathan, H.S.

    1995-12-31

    The finite element code FEHMN is a three-dimensional finite element heat and mass transport simulator that can handle complex stratigraphy and nonlinear processes such as vadose zone flow, heat flow and solute transport. Scientists at LANL have been developed hydrologic flow and transport models of the Yucca Mountain site using FEHMN. Previous FEHMN simulations have used an equivalent K{sub d} model to model solute transport. In this thesis, FEHMN is modified making it possible to simulate the transport of a species with a rigorous chemical model. Including the rigorous chemical equations into FEHMN simulations should provide for more representative transport models for highly reactive chemical species. A fully kinetic formulation is chosen for the FEHMN reactive transport model. Several methods are available to computationally implement a fully kinetic formulation. Different numerical algorithms are investigated in order to optimize computational efficiency and memory requirements of the reactive transport model. The best algorithm of those investigated is then incorporated into FEHMN. The algorithm chosen requires for the user to place strongly coupled species into groups which are then solved for simultaneously using FEHMN. The complete reactive transport model is verified over a wide variety of problems and is shown to be working properly. The simulations demonstrate that gas flow and carbonate chemistry can significantly affect {sup 14}C transport at Yucca Mountain. The simulations also provide that the new capabilities of FEHMN can be used to refine and buttress already existing Yucca Mountain radionuclide transport studies.

  5. A mass-conservative finite volume predictor-corrector solution of the 1D Richards' equation

    NASA Astrophysics Data System (ADS)

    Lai, Wencong; Ogden, Fred L.

    2015-04-01

    Numerical solution of the Richards' equation (RE) in variably saturated soils continues to be a challenge due to its highly non-linear behavior. This is particularly true as soils approach saturation and the behavior of the fundamental partial differential equation changes from elliptic to parabolic. In this paper, a finite volume predictor-corrector method with adaptive time-stepping was developed to solve the 1D vertical RE. The numerical method was mass-conservative and non-iterative. In the predictor step, the pressure head-based form of the RE was solved using the cell-centered finite volume method and the pressure head was updated. In the corrector step, the soil water content was calculated by solving the mixed form RE. Five different schemes to evaluate the inter-cell hydraulic conductivity were investigated. The robustness and accuracy of the numerical model were demonstrated through simulation of experimental tests, including free drainage, field infiltration into wet and dry soils, and laboratory infiltration with falling water table. Numerical results were compared against laboratory measurements, simulation results from the Hydrus-1D program, or analytical solution when available. Results showed that the developed scheme is robust and accurate in simulating variably saturated flows with various boundary conditions. The arithmetic mean and Szymkiewicz's mean of inter-cell hydraulic conductivity performed better than other methods especially in the case of infiltration into very dry soil.

  6. Phase diagram of dynamical twisted-mass Wilson fermions at finite isospin chemical potential

    NASA Astrophysics Data System (ADS)

    Janssen, Oliver; Kieburg, Mario; Splittorff, K.; Verbaarschot, Jacobus J. M.; Zafeiropoulos, Savvas

    2016-05-01

    We consider the phase diagram of twisted-mass Wilson fermions of two-flavor QCD in the parameter space of the quark mass, the isospin chemical potential, the twist angle and the lattice spacing. This work extends earlier studies in the continuum and those at zero chemical potential. We evaluate the phase diagram as well as the spectrum of the (pseudo-)Goldstone bosons using the chiral Lagrangian for twisted-mass Wilson fermions at nonzero isospin chemical potential. The phases are obtained from a mean field analysis. At zero twist angle we find that already an infinitesimal isospin chemical potential destroys the Aoki phase. The reason is that in this phase we have massless Goldstone bosons with a nonzero isospin charge. At finite twist angle, only two different phases are present—one phase which is continuously connected to the Bose condensed phase at nonzero chemical potential, and another phase which is continuously connected to the normal phase. For either zero or maximal twist, the phase diagram is more complicated, as the saddle-point equations allow for more solutions.

  7. Effects of top-dressing recycled broiler litter on litter production, litter characteristics, and nitrogen mass balance.

    PubMed

    Coufal, C D; Chavez, C; Niemeyer, P R; Carey, J B

    2006-03-01

    Top-dressing is a method of broiler litter management in which a thin layer of new, clean litter material is spread over the top of previously used litter prior to placement of a new flock. This fresh layer of bedding material increases the absorptive capacity of the litter and decreases litter caking. Although this practice has been widely used in the poultry industry for many years, no research has been conducted to quantify the effects the practice has on broiler performance, litter production rates, and nutrient content, or the ability of broiler litter to retain manure N and prevent volatilization. An experiment was conducted to quantify these parameters under simulated commercial conditions in a research facility. Nine consecutive flocks of broilers were reared on recycled broiler litter that had previously been used for 9 flocks. Control pens received no litter treatment whereas top-dressed pens received a thin layer of new rice hulls (1 to 2 cm) before the placement of each flock. Nitrogen loss was calculated using the mass balance method. Average broiler performance was not different between the top-dressed and control pens. Top-dressing of litter significantly (P < 0.05) reduced caked litter production compared with control pens in 6 of 9 flocks. However, average total litter production over all 9 flocks was not different between the 2 litter management strategies. In all flocks, litter N content was significantly reduced in top-dressed pens compared with control pens. As a result, litter C:N ratios were significantly higher for pens with top-dressed litter. Differences in N loss between the treatments were not consistent. Average N loss for all flocks was 10.61 and 11.92 g of N/kg of marketed broiler for control and top-dressed pens, respectively, or 20.1 and 22.5% of N inputs, respectively. Based on this experiment, top-dressing of recycled broiler litter would not be recommended as a strategy to reduce the volatilization of N from broiler rearing

  8. Ultraviolet photodissociation enhances top-down mass spectrometry as demonstrated on green fluorescent protein variants.

    PubMed

    Dang, Xibei; Young, Nicolas L

    2014-05-01

    Ultraviolet photodissociation (UVPD) is a compelling fragmentation technique with great potential to enhance proteomics generally and top-down MS specifically. In this issue, Cannon et al. (Proteomics 2014, 14, XXXX-XXXX) use UVPD to perform top-down MS on several sequence variants of green fluorescent protein and compare the results to CID, higher energy collision induced dissociation, and electron transfer dissociation. As compared to the other techniques UVPD produces a wider variety of fragment ion types that are relatively evenly distributed across the protein sequences. Overall, their results demonstrate enhanced sequence coverage and higher confidence in sequence assignment via UVPD MS. Based on these and other recent results UVPD is certain to become an increasingly widespread and valuable tool for top-down proteomics. PMID:24723542

  9. FEHMN 1.0: Finite element heat and mass transfer code

    SciTech Connect

    Zyvoloski, G.; Dash, Z.; Kelkar, S.

    1991-04-01

    A computer code is described which can simulate non-isothermal multiphase multicomponent flow in porous media. It is applicable to natural-state studies of geothermal systems and ground-water flow. The equations of heat and mass transfer for multiphase flow in porous and permeable media are solved using the finite element method. The permeability and porosity of the medium are allowed to depend on pressure and temperature. The code also has provisions for movable air and water phases and noncoupled tracers; that is, tracer solutions that do not affect the heat and mass transfer solutions. The tracers can be passive or reactive. The code can simulate two-dimensional, two-dimensional radial, or three-dimensional geometries. A summary of the equations in the model and the numerical solution procedure are provided in this report. A user`s guide and sample problems are also included. The main use of FEHMN will be to assist in the understanding of flow fields in the saturated zone below the proposed Yucca Mountain Repository. 33 refs., 27 figs., 12 tabs.

  10. Effects of finite volume on the KL – KS mass difference

    SciTech Connect

    Christ, N.  H.; Feng, X.; Martinelli, G.; Sachrajda, C.  T.

    2015-06-24

    Phenomena that involve two or more on-shell particles are particularly sensitive to the effects of finite volume and require special treatment when computed using lattice QCD. In this paper we generalize the results of Lüscher and Lellouch and Lüscher, which determine the leading-order effects of finite volume on the two-particle spectrum and two-particle decay amplitudes to determine the finite-volume effects in the second-order mixing of the K⁰ and K⁰⁻ states. We extend the methods of Kim, Sachrajda, and Sharpe to provide a direct, uniform treatment of these three, related, finite-volume corrections. In particular, the leading, finite-volume corrections to the KL – KS mass difference ΔMK and the CP-violating parameter εK are determined, including the potentially large effects which can arise from the near degeneracy of the kaon mass and the energy of a finite-volume, two-pion state.

  11. Modification of the finite element heat and mass transfer code (FEHM) to model multicomponent reactive transport

    SciTech Connect

    Viswanathan, H.S.

    1996-08-01

    The finite element code FEHMN, developed by scientists at Los Alamos National Laboratory (LANL), is a three-dimensional finite element heat and mass transport simulator that can handle complex stratigraphy and nonlinear processes such as vadose zone flow, heat flow and solute transport. Scientists at LANL have been developing hydrologic flow and transport models of the Yucca Mountain site using FEHMN. Previous FEHMN simulations have used an equivalent Kd model to model solute transport. In this thesis, FEHMN is modified making it possible to simulate the transport of a species with a rigorous chemical model. Including the rigorous chemical equations into FEHMN simulations should provide for more representative transport models for highly reactive chemical species. A fully kinetic formulation is chosen for the FEHMN reactive transport model. Several methods are available to computationally implement a fully kinetic formulation. Different numerical algorithms are investigated in order to optimize computational efficiency and memory requirements of the reactive transport model. The best algorithm of those investigated is then incorporated into FEHMN. The algorithm chosen requires for the user to place strongly coupled species into groups which are then solved for simultaneously using FEHMN. The complete reactive transport model is verified over a wide variety of problems and is shown to be working properly. The new chemical capabilities of FEHMN are illustrated by using Los Alamos National Laboratory`s site scale model of Yucca Mountain to model two-dimensional, vadose zone {sup 14}C transport. The simulations demonstrate that gas flow and carbonate chemistry can significantly affect {sup 14}C transport at Yucca Mountain. The simulations also prove that the new capabilities of FEHMN can be used to refine and buttress already existing Yucca Mountain radionuclide transport studies.

  12. RESEARCH NOTE FROM COLLABORATION: Search for low mass SUSY using hadronic top decays in pp collisions at \\sqrt{s}=14 TeV with the CMS detector

    NASA Astrophysics Data System (ADS)

    Paktinat Mehdiabadi, S.; Pape, L.; Spiropulu, M.

    2007-01-01

    An inclusive search for low mass SUSY using the top plus missing transverse energy signature at CMS is presented. A kinematic fit with the top and W masses as constraints is utilized to reconstruct the top in all-hadronic final states. A 5σ excess can be observed with ~250 pb-1 at a particular low mass SUSY point. With the same analysis selection the 5σ discovery reach contours in the mSUGRA parameter space for 1 and 10 fb-1 are obtained.

  13. Measurement of the top quark mass with the template method in the tbar{t} tolepton+jets channel using ATLAS data

    NASA Astrophysics Data System (ADS)

    Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adamczyk, L.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; Adomeit, S.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J. A.; Aharrouche, M.; Ahlen, S. P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Akiyama, A.; Alam, M. S.; Alam, M. A.; Albert, J.; Albrand, S.; Aleksa, M.; Aleksandrov, I. N.; Alessandria, F.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allbrooke, B. M. M.; Allport, P. P.; Allwood-Spiers, S. E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alvarez Gonzalez, B.; Alviggi, M. G.; Amako, K.; Amaral, P.; Amelung, C.; Ammosov, V. V.; Amorim, A.; Amorós, G.; Amram, N.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Andrieux, M.-L.; Anduaga, X. S.; Angerami, A.; Anghinolfi, F.; Anisenkov, A.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoun, S.; Aperio Bella, L.; Apolle, R.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A. T. H.; Arfaoui, S.; Arguin, J.-F.; Arik, E.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Artoni, G.; Arutinov, D.; Asai, S.; Asfandiyarov, R.; Ask, S.; Åsman, B.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Aubert, B.; Auge, E.; Augsten, K.; Aurousseau, M.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M. A.; Baccaglioni, G.; Bacci, C.; Bach, A. M.; Bachacou, H.; Bachas, K.; Backes, M.; Backhaus, M.; Badescu, E.; Bagnaia, P.; Bahinipati, S.; Bai, Y.; Bailey, D. C.; Bain, T.; Baines, J. T.; Baker, O. K.; Baker, M. D.; Baker, S.; Banas, E.; Banerjee, P.; Banerjee, Sw.; Banfi, D.; Bangert, A.; Bansal, V.; Bansil, H. S.; Barak, L.; Baranov, S. P.; Barashkou, A.; Barbaro Galtieri, A.; Barber, T.; Barberio, E. L.; Barberis, D.; Barbero, M.; Bardin, D. Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B. M.; Barnett, R. M.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Barrillon, P.; Bartoldus, R.; Barton, A. E.; Bartsch, V.; Bates, R. L.; Batkova, L.; Batley, J. R.; Battaglia, A.; Battistin, M.; Bauer, F.; Bawa, H. S.; Beale, S.; Beare, B.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Becker, S.; Beckingham, M.; Becks, K. H.; Beddall, A. J.; Beddall, A.; Bedikian, S.; Bednyakov, V. A.; Bee, C. P.; Begel, M.; Behar Harpaz, S.; Behera, P. K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Beloborodova, O.; Belotskiy, K.; Beltramello, O.; Ben Ami, S.; Benary, O.; Benchekroun, D.; Benchouk, C.; Bendel, M.; Benekos, N.; Benhammou, Y.; Benhar Noccioli, E.; Benitez Garcia, J. A.; Benjamin, D. P.; Benoit, M.; Bensinger, J. R.; Benslama, K.; Bentvelsen, S.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertella, C.; Bertin, A.; Bertinelli, F.; Bertolucci, F.; Besana, M. I.; Besson, N.; Bethke, S.; Bhimji, W.; Bianchi, R. M.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Bierwagen, K.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K. M.; Blair, R. E.; Blanchard, J.-B.; Blanchot, G.; Blazek, T.; Blocker, C.; Blocki, J.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. B.; Bocchetta, S. S.; Bocci, A.; Boddy, C. R.; Boehler, M.; Boek, J.; Boelaert, N.; Bogaerts, J. A.; Bogdanchikov, A.; Bogouch, A.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Bolnet, N. M.; Bona, M.; Bondarenko, V. G.; Bondioli, M.; Boonekamp, M.; Booth, C. N.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borri, M.; Borroni, S.; Bortolotto, V.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Botterill, D.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E. V.; Boumediene, D.; Bourdarios, C.; Bousson, N.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozhko, N. I.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G. W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Breton, D.; Britton, D.; Brochu, F. M.; Brock, I.; Brock, R.; Brodbeck, T. J.; Brodet, E.; Broggi, F.; Bromberg, C.; Bronner, J.; Brooijmans, G.; Brooks, W. K.; Brown, G.; Brown, H.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Buanes, T.; Buat, Q.; Bucci, F.; Buchanan, J.; Buchanan, N. J.; Buchholz, P.; Buckingham, R. M.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Budick, B.; Büscher, V.; Bugge, L.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C. P.; Butin, F.; Butler, B.; Butler, J. M.; Buttar, C. M.; Butterworth, J. M.; Buttinger, W.; Cabrera Urbán, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L. P.; Caloi, R.; Calvet, D.; Calvet, S.; Camacho Toro, R.; Camarri, P.; Cambiaghi, M.; Cameron, D.; Caminada, L. M.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capriotti, D.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G. D.; Carter, A. A.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Cascella, M.; Caso, C.; Castaneda Hernandez, A. M.; Castaneda-Miranda, E.; Castillo Gimenez, V.; Castro, N. F.; Cataldi, G.; Cataneo, F.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S. A.; Cevenini, F.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapleau, B.; Chapman, J. D.; Chapman, J. W.; Chareyre, E.; Charlton, D. G.; Chavda, V.; Chavez Barajas, C. A.; Cheatham, S.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, S.; Chen, T.; Chen, X.; Cheng, S.; Cheplakov, A.; Chepurnov, V. F.; Cherkaoui El Moursli, R.; Chernyatin, V.; Cheu, E.; Cheung, S. L.; Chevalier, L.; Chiefari, G.; Chikovani, L.; Childers, J. T.; Chilingarov, A.; Chiodini, G.; Chisholm, A. S.; Chizhov, M. V.; Choudalakis, G.; Chouridou, S.; Christidi, I. A.; Christov, A.; Chromek-Burckhart, D.; Chu, M. L.; Chudoba, J.; Ciapetti, G.; Ciba, K.; Ciftci, A. K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M. D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Citterio, M.; Ciubancan, M.; Clark, A.; Clark, P. J.; Cleland, W.; Clemens, J. C.; Clement, B.; Clement, C.; Clifft, R. W.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coe, P.; Cogan, J. G.; Coggeshall, J.; Cogneras, E.; Colas, J.; Colijn, A. P.; Collins, N. J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Conde Muiño, P.; Coniavitis, E.; Conidi, M. C.; Consonni, M.; Consorti, V.; Constantinescu, S.; Conta, C.; Conventi, F.; Cook, J.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Costin, T.; Côté, D.; Coura Torres, R.; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B. E.; Cranmer, K.; Crescioli, F.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crépé-Renaudin, S.; Cuciuc, C.-M.; Cuenca Almenar, C.; Cuhadar Donszelmann, T.; Curatolo, M.; Curtis, C. J.; Cuthbert, C.; Cwetanski, P.; Czirr, H.; Czodrowski, P.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; Da Silva, P. V. M.; Da Via, C.; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dam, M.; Dameri, M.; Damiani, D. S.; Danielsson, H. O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G. L.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, E.; Davies, M.; Davison, A. R.; Davygora, Y.; Dawe, E.; Dawson, I.; Dawson, J. W.; Daya-Ishmukhametova, R. K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro Faria Salgado, P. E.; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De La Taille, C.; De la Torre, H.; De Lotto, B.; de Mora, L.; De Nooij, L.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J. B.; Dean, S.; Dearnaley, W. J.; Debbe, R.; Debenedetti, C.; Dedovich, D. V.; Degenhardt, J.; Dehchar, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Delemontex, T.; Deliyergiyev, M.; Dell'Acqua, A.; Dell'Asta, L.; Della Pietra, M.; della Volpe, D.; Delmastro, M.; Delruelle, N.; Delsart, P. A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Devetak, E.; Deviveiros, P. O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Micco, B.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M. A.; Diblen, F.; Diehl, E. B.; Dietrich, J.; Dietzsch, T. A.; Diglio, S.; Dindar Yagci, K.; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; do Vale, M. A. B.; Do Valle Wemans, A.; Doan, T. K. O.; Dobbs, M.; Dobinson, R.; Dobos, D.; Dobson, E.; Dodd, J.; Doglioni, C.; Doherty, T.; Doi, Y.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B. A.; Dohmae, T.; Donadelli, M.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dosil, M.; Dotti, A.; Dova, M. T.; Dowell, J. D.; Doxiadis, A. D.; Doyle, A. T.; Drasal, Z.; Drees, J.; Dressnandt, N.; Drevermann, H.; Driouichi, C.; Dris, M.; Dubbert, J.; Dube, S.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Dührssen, M.; Duerdoth, I. P.; Duflot, L.; Dufour, M.-A.; Dunford, M.; Duran Yildiz, H.; Duxfield, R.; Dwuznik, M.; Dydak, F.; Düren, M.; Ebenstein, W. L.; Ebke, J.; Eckweiler, S.; Edmonds, K.; Edwards, C. A.; Edwards, N. C.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienne, F.; Etienvre, A. I.; Etzion, E.; Evangelakou, D.; Evans, H.; Fabbri, L.; Fabre, C.; Fakhrutdinov, R. M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S. M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Favareto, A.; Fayard, L.; Fazio, S.; Febbraro, R.; Federic, P.; Fedin, O. L.; Fedorko, W.; Fehling-Kaschek, M.; Feligioni, L.; Fellmann, D.; Feng, C.; Feng, E. J.; Fenyuk, A. B.; Ferencei, J.; Ferland, J.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M. L.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, G.; Fischer, P.; Fisher, M. J.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L. R.; Flowerdew, M. J.; Fokitis, M.; Fonseca Martin, T.; Forbush, D. A.; Formica, A.; Forti, A.; Fortin, D.; Foster, J. M.; Fournier, D.; Foussat, A.; Fowler, A. J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Frank, T.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; French, S. T.; Friedrich, F.; Froeschl, R.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E. J.; Gallo, V.; Gallop, B. J.; Gallus, P.; Gan, K. K.; Gao, Y. S.; Gapienko, V. A.; Gaponenko, A.; Garberson, F.; Garcia-Sciveres, M.; García, C.; García Navarro, J. E.; Gardner, R. W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Garvey, J.; Gatti, C.; Gaudio, G.; Gaur, B.; Gauthier, L.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gayde, J.-C.; Gazis, E. N.; Ge, P.; Gee, C. N. P.; Geerts, D. A. A.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Gemmell, A.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerlach, P.; Gershon, A.; Geweniger, C.; Ghazlane, H.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S. M.; Gilbert, L. M.; Gilewsky, V.; Gillberg, D.; Gillman, A. R.; Gingrich, D. M.; Ginzburg, J.; Giokaris, N.; Giordani, M. P.; Giordano, R.; Giorgi, F. M.; Giovannini, P.; Giraud, P. F.; Giugni, D.; Giunta, M.; Giusti, P.; Gjelsten, B. K.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glazov, A.; Glitza, K. W.; Glonti, G. L.; Goddard, J. R.; Godfrey, J.; Godlewski, J.; Goebel, M.; Göpfert, T.; Goeringer, C.; Gössling, C.; Göttfert, T.; Goldfarb, S.; Golling, T.; Gomes, A.; Gomez Fajardo, L. S.; Gonçalo, R.; Goncalves Pinto Firmino Da Costa, J.; Gonella, L.; Gonidec, A.; Gonzalez, S.; González de la Hoz, S.; Gonzalez Parra, G.; Gonzalez Silva, M. L.; Gonzalez-Sevilla, S.; Goodson, J. J.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Gorokhov, S. A.; Goryachev, V. N.; Gosdzik, B.; Gosselink, M.; Gostkin, M. I.; Gough Eschrich, I.; Gouighri, M.; Goujdami, D.; Goulette, M. P.; Goussiou, A. G.; Goy, C.; Gozpinar, S.; Grabowska-Bold, I.; Grafström, P.; Grahn, K.-J.; Grancagnolo, F.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H. M.; Gray, J. A.; Graziani, E.; Grebenyuk, O. G.; Greenshaw, T.; Greenwood, Z. D.; Gregersen, K.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grigalashvili, N.; Grillo, A. A.; Grinstein, S.; Grishkevich, Y. V.; Grivaz, J.-F.; Groh, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guarino, V. J.; Guest, D.; Guicheney, C.; Guida, A.; Guindon, S.; Guler, H.; Gunther, J.; Guo, B.; Guo, J.; Gupta, A.; Gusakov, Y.; Gushchin, V. N.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haas, S.; Haber, C.; Hadavand, H. K.; Hadley, D. R.; Haefner, P.; Hahn, F.; Haider, S.; Hajduk, Z.; Hakobyan, H.; Hall, D.; Haller, J.; Hamacher, K.; Hamal, P.; Hamer, M.; Hamilton, A.; Hamilton, S.; Han, H.; Han, L.; Hanagaki, K.; Hanawa, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J. R.; Hansen, J. B.; Hansen, J. D.; Hansen, P. H.; Hansson, P.; Hara, K.; Hare, G. A.; Harenberg, T.; Harkusha, S.; Harper, D.; Harrington, R. D.; Harris, O. M.; Harrison, K.; Hartert, J.; Hartjes, F.; Haruyama, T.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hassani, S.; Hatch, M.; Hauff, D.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawes, B. M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, A. D.; Hawkins, D.; Hayakawa, T.; Hayashi, T.; Hayden, D.; Hayward, H. S.; Haywood, S. J.; Hazen, E.; He, M.; Head, S. J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, C.; Heller, M.; Hellman, S.; Hellmich, D.; Helsens, C.; Henderson, R. C. W.; Henke, M.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Henry-Couannier, F.; Hensel, C.; Henß, T.; Hernandez, C. M.; Hernández Jiménez, Y.; Herrberg, R.; Hershenhorn, A. D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N. P.; Higón-Rodriguez, E.; Hill, D.; Hill, J. C.; Hill, N.; Hiller, K. H.; Hillert, S.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holder, M.; Holmgren, S. O.; Holy, T.; Holzbauer, J. L.; Homma, Y.; Hong, T. M.; Hooft van Huysduynen, L.; Horazdovsky, T.; Horn, C.; Horner, S.; Hostachy, J.-Y.; Hou, S.; Houlden, M. A.; Hoummada, A.; Howarth, J.; Howell, D. F.; Hristova, I.; Hrivnac, J.; Hruska, I.; Hryn'ova, T.; Hsu, P. J.; Hsu, S.-C.; Huang, G. S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huettmann, A.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Hughes-Jones, R. E.; Huhtinen, M.; Hurst, P.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibbotson, M.; Ibragimov, I.; Ichimiya, R.; Iconomidou-Fayard, L.; Idarraga, J.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Ilic, N.; Imori, M.; Ince, T.; Inigo-Golfin, J.; Ioannou, P.; Iodice, M.; Ippolito, V.; Irles Quiles, A.; Isaksson, C.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Ivashin, A. V.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jackson, B.; Jackson, J. N.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D. K.; Jankowski, E.; Jansen, E.; Jansen, H.; Jantsch, A.; Janus, M.; Jarlskog, G.; Jeanty, L.; Jelen, K.; Jen-La Plante, I.; Jenni, P.; Jeremie, A.; Jež, P.; Jézéquel, S.; Jha, M. K.; Ji, H.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, G.; Jin, S.; Jinnouchi, O.; Joergensen, M. D.; Joffe, D.; Johansen, L. G.; Johansen, M.; Johansson, K. E.; Johansson, P.; Johnert, S.; Johns, K. A.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. W.; Jones, T. J.; Jonsson, O.; Joram, C.; Jorge, P. M.; Joseph, J.; Jovin, T.; Ju, X.; Jung, C. A.; Jungst, R. M.; Juranek, V.; Jussel, P.; Juste Rozas, A.; Kabachenko, V. V.; Kabana, S.; Kaci, M.; Kaczmarska, A.; Kadlecik, P.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L. V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kaneti, S.; Kanno, T.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagounis, M.; Karagoz, M.; Karnevskiy, M.; Karr, K.; Kartvelishvili, V.; Karyukhin, A. N.; Kashif, L.; Kasieczka, G.; Kass, R. D.; Kastanas, A.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M. S.; Kazanin, V. A.; Kazarinov, M. Y.; Keeler, R.; Kehoe, R.; Keil, M.; Kekelidze, G. D.; Kennedy, J.; Kenney, C. J.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kerševan, B. P.; Kersten, S.; Kessoku, K.; Keung, J.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Kholodenko, A. G.; Khomich, A.; Khoo, T. J.; Khoriauli, G.; Khoroshilov, A.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M. S.; Kim, P. C.; Kim, S. H.; Kimura, N.; Kind, O.; King, B. T.; King, M.; King, R. S. B.; Kirk, J.; Kirsch, L. E.; Kiryunin, A. E.; Kishimoto, T.; Kisielewska, D.; Kittelmann, T.; Kiver, A. M.; Kladiva, E.; Klaiber-Lodewigs, J.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimek, P.; Klimentov, A.; Klingenberg, R.; Klinger, J. A.; Klinkby, E. B.; Klioutchnikova, T.; Klok, P. F.; Klous, S.; Kluge, E.-E.; Kluge, T.; Kluit, P.; Kluth, S.; Knecht, N. S.; Kneringer, E.; Knobloch, J.; Knoops, E. B. F. G.; Knue, A.; Ko, B. R.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kodys, P.; Köneke, K.; König, A. C.; Koenig, S.; Köpke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kogan, L. A.; Kohn, F.; Kohout, Z.; Kohriki, T.; Koi, T.; Kokott, T.; Kolachev, G. M.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kollefrath, M.; Kolya, S. D.; Komar, A. A.; Komori, Y.; Kondo, T.; Kono, T.; Kononov, A. I.; Konoplich, R.; Konstantinidis, N.; Kootz, A.; Koperny, S.; Korcyl, K.; Kordas, K.; Koreshev, V.; Korn, A.; Korol, A.; Korolkov, I.; Korolkova, E. V.; Korotkov, V. A.; Kortner, O.; Kortner, S.; Kostyukhin, V. V.; Kotamäki, M. J.; Kotov, S.; Kotov, V. M.; Kotwal, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kral, V.; Kramarenko, V. A.; Kramberger, G.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J.; Kraus, J. K.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Kruker, T.; Krumnack, N.; Krumshteyn, Z. V.; Kruth, A.; Kubota, T.; Kuday, S.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kundu, N.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurochkin, Y. A.; Kus, V.; Kuwertz, E. S.; Kuze, M.; Kvita, J.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labarga, L.; Labbe, J.; Lablak, S.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Laisne, E.; Lamanna, M.; Lampen, C. L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M. P. J.; Lane, J. L.; Lange, C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Larionov, A. V.; Larner, A.; Lasseur, C.; Lassnig, M.; Laurelli, P.; Lavrijsen, W.; Laycock, P.; Lazarev, A. B.; Le Dortz, O.; Le Guirriec, E.; Le Maner, C.; Le Menedeu, E.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J. S. H.; Lee, S. C.; Lee, L.; Lefebvre, M.; Legendre, M.; Leger, A.; LeGeyt, B. C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Leltchouk, M.; Lemmer, B.; Lendermann, V.; Leney, K. J. C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leontsinis, S.; Leroy, C.; Lessard, J.-R.; Lesser, J.; Lester, C. G.; Leung Fook Cheong, A.; Levêque, J.; Levin, D.; Levinson, L. J.; Levitski, M. S.; Lewis, A.; Lewis, G. H.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liao, H.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lifshitz, R.; Limbach, C.; Limosani, A.; Limper, M.; Lin, S. C.; Linde, F.; Linnemann, J. T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, C.; Liu, D.; Liu, H.; Liu, J. B.; Liu, M.; Liu, Y.; Livan, M.; Livermore, S. S. A.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Loddenkoetter, T.; Loebinger, F. K.; Loginov, A.; Loh, C. W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Loken, J.; Lombardo, V. P.; Long, R. E.; Lopes, L.; Lopez Mateos, D.; Lorenz, J.; Lorenzo Martinez, N.; Losada, M.; Loscutoff, P.; Lo Sterzo, F.; Losty, M. J.; Lou, X.; Lounis, A.; Loureiro, K. F.; Love, J.; Love, P. A.; Lowe, A. J.; Lu, F.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Ludwig, J.; Luehring, F.; Luijckx, G.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lungwitz, M.; Lutz, G.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L. L.; Macana Goia, J. A.; Maccarrone, G.; Macchiolo, A.; Maček, B.; Machado Miguens, J.; Mackeprang, R.; Madaras, R. J.; Mader, W. F.; Maenner, R.; Maeno, T.; Mättig, P.; Mättig, S.; Magnoni, L.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahout, G.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Mal, P.; Malaescu, B.; Malecki, Pa.; Malecki, P.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Malone, C.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mameghani, R.; Mamuzic, J.; Manabe, A.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Mangeard, P. S.; Manhaes de Andrade Filho, L.; Manjavidze, I. D.; Mann, A.; Manning, P. M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Manz, A.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J. F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marin, A.; Marino, C. P.; Marroquim, F.; Marshall, R.; Marshall, Z.; Martens, F. K.; Marti-Garcia, S.; Martin, A. J.; Martin, B.; Martin, B.; Martin, F. F.; Martin, J. P.; Martin, Ph.; Martin, T. A.; Martin, V. J.; Martin dit Latour, B.; Martin-Haugh, S.; Martinez, M.; Martinez Outschoorn, V.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Massa, I.; Massaro, G.; Massol, N.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Mathes, M.; Matricon, P.; Matsumoto, H.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maugain, J. M.; Maurer, J.; Maxfield, S. J.; Maximov, D. A.; May, E. N.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mazzoni, E.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; Mcfayden, J. A.; McGlone, H.; Mchedlidze, G.; McLaren, R. A.; Mclaughlan, T.; McMahon, S. J.; McPherson, R. A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.; Mehdiyev, R.; Mehlhase, S.; Mehta, A.; Meier, K.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B. R.; Mendoza Navas, L.; Meng, Z.; Mengarelli, A.; Menke, S.; Menot, C.; Meoni, E.; Mercurio, K. M.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Merritt, H.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meyer, C.; Meyer, C.; Meyer, J.-P.; Meyer, J.; Meyer, J.; Meyer, T. C.; Meyer, W. T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R. P.; Migas, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Miller, D. W.; Miller, R. J.; Mills, W. J.; Mills, C.; Milov, A.; Milstead, D. A.; Milstein, D.; Minaenko, A. A.; Miñano Moya, M.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mirabelli, G.; Miralles Verge, L.; Misiejuk, A.; Mitrevski, J.; Mitrofanov, G. Y.; Mitsou, V. A.; Mitsui, S.; Miyagawa, P. S.; Miyazaki, K.; Mjörnmark, J. U.; Moa, T.; Mockett, P.; Moed, S.; Moeller, V.; Mönig, K.; Möser, N.; Mohapatra, S.; Mohr, W.; Mohrdieck-Möck, S.; Moisseev, A. M.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Monzani, S.; Moore, R. W.; Moorhead, G. F.; Mora Herrera, C.; Moraes, A.; Morange, N.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Morii, M.; Morin, J.; Morley, A. K.; Mornacchi, G.; Morozov, S. V.; Morris, J. D.; Morvaj, L.; Moser, H. G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Müller, T. A.; Mueller, T.; Muenstermann, D.; Muir, A.; Munwes, Y.; Murray, W. J.; Mussche, I.; Musto, E.; Myagkov, A. G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagarkar, A.; Nagasaka, Y.; Nagel, M.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakamura, T.; Nakano, I.; Nanava, G.; Napier, A.; Narayan, R.; Nash, M.; Nation, N. R.; Nattermann, T.; Naumann, T.; Navarro, G.; Neal, H. A.; Nebot, E.; Nechaeva, P. Yu.; Neep, T. J.; Negri, A.; Negri, G.; Nektarijevic, S.; Nelson, A.; Nelson, S.; Nelson, T. K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Neubauer, M. S.; Neusiedl, A.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nguyen Thi Hong, V.; Nickerson, R. B.; Nicolaidou, R.; Nicolas, L.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Niinikoski, T.; Nikiforou, N.; Nikiforov, A.; Nikolaenko, V.; Nikolaev, K.; Nikolic-Audit, I.; Nikolics, K.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Norton, P. R.; Novakova, J.; Nozaki, M.; Nozka, L.; Nugent, I. M.; Nuncio-Quiroz, A.-E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; O'Brien, B. J.; O'Neale, S. W.; O'Neil, D. C.; O'Shea, V.; Oakes, L. B.; Oakham, F. G.; Oberlack, H.; Ocariz, J.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohshima, T.; Ohshita, H.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olariu, A.; Olcese, M.; Olchevski, A. G.; Oliveira, M.; Oliveira Damazio, D.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Osuna, C.; Otero y Garzon, G.; Ottersbach, J. P.; Ouchrif, M.; Ouellette, E. A.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Ovcharova, A.; Owen, M.; Owen, S.; Ozcan, V. E.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pais, P.; Pajchel, K.; Palacino, G.; Paleari, C. P.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J. D.; Pan, Y. B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadelis, A.; Papadopoulou, Th. D.; Paramonov, A.; Park, W.; Parker, M. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pasqualucci, E.; Passaggio, S.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N.; Pater, J. R.; Patricelli, S.; Pauly, T.; Pecsy, M.; Pedraza Morales, M. I.; Peleganchuk, S. V.; Peng, H.; Pengo, R.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Cavalcanti, T.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Perrodo, P.; Persembe, S.; Perus, A.; Peshekhonov, V. D.; Peters, K.; Petersen, B. A.; Petersen, J.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, P. W.; Piacquadio, G.; Piccaro, E.; Piccinini, M.; Piec, S. M.; Piegaia, R.; Pignotti, D. T.; Pilcher, J. E.; Pilkington, A. D.; Pina, J.; Pinamonti, M.; Pinder, A.; Pinfold, J. L.; Ping, J.; Pinto, B.; Pirotte, O.; Pizio, C.; Plamondon, M.; Pleier, M.-A.; Pleskach, A. V.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poggioli, L.; Poghosyan, T.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomarede, D. M.; Pomeroy, D.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Portell Bueso, X.; Posch, C.; Pospelov, G. E.; Pospisil, S.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Pranko, A.; Prasad, S.; Pravahan, R.; Prell, S.; Pretzl, K.; Pribyl, L.; Price, D.; Price, J.; Price, L. E.; Price, M. J.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przybycien, M.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Pueschel, E.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qian, J.; Qian, Z.; Qin, Z.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Quinonez, F.; Raas, M.; Radescu, V.; Radics, B.; Radloff, P.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A. M.; Rahm, D.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Randle-Conde, A. S.; Randrianarivony, K.; Ratoff, P. N.; Rauscher, F.; Raymond, M.; Read, A. L.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reichold, A.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z. L.; Renaud, A.; Renkel, P.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R. R.; Riu, I.; Rivoltella, G.; Rizatdinova, F.; Rizvi, E.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robinson, M.; Robson, A.; Rocha de Lima, J. G.; Roda, C.; Roda Dos Santos, D.; Rodriguez, D.; Roe, A.; Roe, S.; Røhne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romano, M.; Romanov, V. M.; Romeo, G.; Romero Adam, E.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, A.; Rose, M.; Rosenbaum, G. A.; Rosenberg, E. I.; Rosendahl, P. L.; Rosenthal, O.; Rosselet, L.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubinskiy, I.; Ruckert, B.; Ruckstuhl, N.; Rud, V. I.; Rudolph, C.; Rudolph, G.; Rühr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rumiantsev, V.; Rumyantsev, L.; Runge, K.; Rurikova, Z.; Rusakovich, N. A.; Rust, D. R.; Rutherfoord, J. P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y. F.; Ryadovikov, V.; Ryan, P.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Rzaeva, S.; Saavedra, A. F.; Sadeh, I.; Sadrozinski, H. F.-W.; Sadykov, R.; Safai Tehrani, F.; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B. M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B. H.; Sanchez, A.; Sanchez Martinez, V.; Sandaker, H.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, T.; Sandoval, C.; Sandstroem, R.; Sandvoss, S.; Sankey, D. P. C.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Santos, H.; Saraiva, J. G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sartisohn, G.; Sasaki, O.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Sauvan, E.; Sauvan, J. B.; Savard, P.; Savinov, V.; Savu, D. O.; Sawyer, L.; Saxon, D. H.; Says, L. P.; Sbarra, C.; Sbrizzi, A.; Scallon, O.; Scannicchio, D. A.; Scarcella, M.; Schaarschmidt, J.; Schacht, P.; Schäfer, U.; Schaepe, S.; Schaetzel, S.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Schamov, A. G.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Schernau, M.; Scherzer, M. I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schlereth, J. L.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitz, M.; Schöning, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schroeder, C.; Schroer, N.; Schuh, S.; Schuler, G.; Schultens, M. J.; Schultes, J.; Schultz-Coulon, H.-C.; Schulz, H.; Schumacher, J. W.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Schwindt, T.; Schwoerer, M.; Scott, W. G.; Searcy, J.; Sedov, G.; Sedykh, E.; Segura, E.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Selbach, K. E.; Seliverstov, D. M.; Sellden, B.; Sellers, G.; Seman, M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Serkin, L.; Seuster, R.; Severini, H.; Sevior, M. E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shank, J. T.; Shao, Q. T.; Shapiro, M.; Shatalov, P. B.; Shaver, L.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shichi, H.; Shimizu, S.; Shimojima, M.; Shin, T.; Shiyakova, M.; Shmeleva, A.; Shochet, M. J.; Short, D.; Shrestha, S.; Shulga, E.; Shupe, M. A.; Sicho, P.; Sidoti, A.; Siegert, F.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N. B.; Sipica, V.; Siragusa, G.; Sircar, A.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinnari, L. A.; Skottowe, H. P.; Skovpen, K.; Skubic, P.; Skvorodnev, N.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloper, J.; Smakhtin, V.; Smirnov, S. Yu.; Smirnov, Y.; Smirnova, L. N.; Smirnova, O.; Smith, B. C.; Smith, D.; Smith, K. M.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snow, S. W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E.; Soldevila, U.; Solfaroli Camillocci, E.; Solodkov, A. A.; Solovyanov, O. V.; Soni, N.; Sopko, V.; Sopko, B.; Sosebee, M.; Soualah, R.; Soukharev, A.; Spagnolo, S.; Spanò, F.; Spighi, R.; Spigo, G.; Spila, F.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; St. Denis, R. D.; Stahlman, J.; Stamen, R.; Stanecka, E.; Stanek, R. W.; Stanescu, C.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staude, A.; Stavina, P.; Stavropoulos, G.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stern, S.; Stevenson, K.; Stewart, G. A.; Stillings, J. A.; Stockton, M. C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A. R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strang, M.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Strong, J. A.; Stroynowski, R.; Strube, J.; Stugu, B.; Stumer, I.; Stupak, J.; Sturm, P.; Styles, N. A.; Soh, D. A.; Su, D.; Subramania, HS.; Succurro, A.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suita, K.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M. R.; Suzuki, Y.; Suzuki, Y.; Svatos, M.; Sviridov, Yu. M.; Swedish, S.; Sykora, I.; Sykora, T.; Szeless, B.; Sánchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taiblum, N.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Takubo, Y.; Talby, M.; Talyshev, A.; Tamsett, M. C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tanaka, Y.; Tanasijczuk, A. J.; Tani, K.; Tannoury, N.; Tappern, G. P.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Tayalati, Y.; Taylor, C.; Taylor, F. E.; Taylor, G. N.; Taylor, W.; Teinturier, M.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Ten Kate, H.; Teng, P. K.; Terada, S.; Terashi, K.; Terron, J.; Testa, M.; Teuscher, R. J.; Thadome, J.; Therhaag, J.; Theveneaux-Pelzer, T.; Thioye, M.; Thoma, S.; Thomas, J. P.; Thompson, E. N.; Thompson, P. D.; Thompson, P. D.; Thompson, A. S.; Thomson, E.; Thomson, M.; Thun, R. P.; Tian, F.; Tibbetts, M. J.; Tic, T.; Tikhomirov, V. O.; Tikhonov, Y. A.; Timoshenko, S.; Tipton, P.; Tique Aires Viegas, F. J.; Tisserant, S.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokár, S.; Tokunaga, K.; Tokushuku, K.; Tollefson, K.; Tomoto, M.; Tompkins, L.; Toms, K.; Tong, G.; Tonoyan, A.; Topfel, C.; Topilin, N. D.; Torchiani, I.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Trinh, T. N.; Tripiana, M. F.; Trischuk, W.; Trivedi, A.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trzebinski, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C.-L.; Tsiakiris, M.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsung, J.-W.; Tsuno, S.; Tsybychev, D.; Tua, A.; Tudorache, A.; Tudorache, V.; Tuggle, J. M.; Turala, M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Turra, R.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Tzanakos, G.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Underwood, D. G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valenta, J.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J. A.; van der Graaf, H.; van der Kraaij, E.; Van Der Leeuw, R.; van der Poel, E.; van der Ster, D.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vanadia, M.; Vandelli, W.; Vandoni, G.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Varela Rodriguez, F.; Vari, R.; Varnes, E. W.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vassilakopoulos, V. I.; Vazeille, F.; Vegni, G.; Veillet, J. J.; Vellidis, C.; Veloso, F.; Veness, R.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Vichou, I.; Vickey, T.; Vickey Boeriu, O. E.; Viehhauser, G. H. A.; Viel, S.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinek, E.; Vinogradov, V. B.; Virchaux, M.; Virzi, J.; Vitells, O.; Viti, M.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vladoiu, D.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, G.; Volpi, M.; Volpini, G.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobiev, A. P.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T. T.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vuillermet, R.; Vukotic, I.; Wagner, W.; Wagner, P.; Wahlen, H.; Wakabayashi, J.; Walbersloh, J.; Walch, S.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Waller, P.; Wang, C.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, J. C.; Wang, R.; Wang, S. M.; Warburton, A.; Ward, C. P.; Warsinsky, M.; Watkins, P. M.; Watson, A. T.; Watson, I. J.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, A. T.; Waugh, B. M.; Weber, M.; Weber, M. S.; Weber, P.; Weidberg, A. R.; Weigell, P.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P. S.; Wen, M.; Wenaus, T.; Wendler, S.; Weng, Z.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Wessels, M.; Weydert, C.; Whalen, K.; Wheeler-Ellis, S. J.; Whitaker, S. P.; White, A.; White, M. J.; Whitehead, S. R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik-Fuchs, L. A. M.; Wijeratne, P. A.; Wildauer, A.; Wildt, M. A.; Wilhelm, I.; Wilkens, H. G.; Will, J. Z.; Williams, E.; Williams, H. H.; Willis, W.; Willocq, S.; Wilson, J. A.; Wilson, M. G.; Wilson, A.; Wingerter-Seez, I.; Winkelmann, S.; Winklmeier, F.; Wittgen, M.; Wolter, M. W.; Wolters, H.; Wong, W. C.; Wooden, G.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wozniak, K. W.; Wraight, K.; Wright, C.; Wright, M.; Wrona, B.; Wu, S. L.; Wu, X.; Wu, Y.; Wulf, E.; Wunstorf, R.; Wynne, B. M.; Xella, S.; Xiao, M.; Xie, S.; Xie, Y.; Xu, C.; Xu, D.; Xu, G.; Yabsley, B.; Yacoob, S.; Yamada, M.; Yamaguchi, H.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamanaka, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U. K.; Yang, Y.; Yang, Y.; Yang, Z.; Yanush, S.; Yao, Y.; Yasu, Y.; Ybeles Smit, G. V.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.; Yu, D.; Yu, J.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zabinski, B.; Zaets, V. G.; Zaidan, R.; Zaitsev, A. M.; Zajacova, Z.; Zanello, L.; Zarzhitsky, P.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zeman, M.; Zemla, A.; Zendler, C.; Zenin, O.; Ženiš, T.; Zinonos, Z.; Zenz, S.; Zerwas, D.; Zevi della Porta, G.; Zhan, Z.; Zhang, D.; Zhang, H.; Zhang, J.; Zhang, X.; Zhang, Z.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zheng, S.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zieminska, D.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zitoun, R.; Živković, L.; Zmouchko, V. V.; Zobernig, G.; Zoccoli, A.; Zolnierowski, Y.; Zsenei, A.; zur Nedden, M.; Zutshi, V.; Zwalinski, L.

    2012-06-01

    The top quark mass has been measured using the template method in the tbar{t}tolepton+jets channel based on data recorded in 2011 with the ATLAS detector at the LHC. The data were taken at a proton-proton centre-of-mass energy of √{s}=7 TeV and correspond to an integrated luminosity of 1.04 fb-1. The analyses in the e+jets and μ+jets decay channels yield consistent results. The top quark mass is measured to be m top=174.5±0.6stat±2.3syst GeV.

  14. Evolution of flow velocities and basal stresses in finite-mass granular flows

    NASA Astrophysics Data System (ADS)

    Bugnion, Louis; Schaefer, Marius

    2010-05-01

    Evolution of flow velocities and basal stresses in finite-mass granular flows We present detailed velocity measurements in granular avalanches flowing down a flat chute together with shear and normal force measurements on the running surface. The chute is five meters long and half a meter wide. Granular material (glass beads or ballotini) with grain sizes between 0.1mm to 1.4 mm were used. The flow was recorded through a transparent side-wall by two high-speed cameras, which are able to capture 1825 pictures in a second. Due to the high frame rate of the cameras, several flow features can be observed with accuracy. By analysing the images with a pattern matching algorithm two dimensional velocity fields with high temporal and spatial resolution were obtained. The evolution of flow-normal velocity profiles, velocity fluctuation profiles and other flow characteristic such as the depth averaged velocity, the slip velocity, the surface velocity, shear rates or flow depth through the flow are tracked. By using two high-speed cameras at different downstream positions the evolution of the gradient of the velocities in downstream direction could also be studied. The shear and normal force plates were located at a camera's downstream position. The evolution of the basal forces and friction coefficients could therefore be analysed with respect to the flow characteristics mentioned above. The flow heights were recorded from the films as well as from two laser sensors located at the cameras downstream positions. We varied the roughness of the running surface by gluing sand paper of different grain-size and drawing paper on the wooden chute. The inclination angle was varied, from 20° to 40° degrees depending on the combination of material and running surface roughness. Together with the different sizes of the ballotini various flow conditions scenarios were carried out. As a result different flow structures could be observed and characterized including velocity profile with

  15. Complete Post-Translational Modification Mapping of Pathogenic N. meningitidis Pilins Requires Top-Down Mass Spectrometry

    PubMed Central

    Gault, Joseph; Malosse, Christian; Machata, Silke; Millien, Corinne; Podglajen, Isabelle; Ploy, Marie-Cécile; Costello, Catherine E.; Duménil, Guillaume; Chamot-Rooke, Julia

    2014-01-01

    In pathogenic bacteria post-translationally modified proteins have been found to promote bacterial survival, replication and evasion from the host immune system. In the human pathogen Neisseria meningitidis, the protein PilE (15–18 kDa) is the major building block of type IV pili, extracellular filamentous organelles that play a major role in mediating pathogenesis. Previous reports have shown that PilE can be expressed as a number of different proteoforms, each harbouring its own set of post-translational modifications (PTMs) and that specific proteoforms are key in promoting bacterial virulence. Efficient tools that allow complete PTM mapping of proteins involved in bacterial infection are therefore strongly needed. As we show in this study, a simple combination of mass profiling and bottom-up proteomics is fundamentally unable to achieve this goal when more than two proteoforms are present simultaneously. In a N. meningitidis strain isolated from a patient with meningitis, mass profiling revealed the presence of four major proteoforms of PilE, in a 1:1:1:1 ratio. Due to the complexity of the sample, a top-down approach was required to achieve complete PTM mapping for all four proteoforms, highlighting an unprecedented extent of glycosylation. Top-down mass spectrometry therefore appears to be a promising tool for the analysis of highly post-translationally modified proteins involved in bacterial virulence. PMID:24459079

  16. Testing realistic quark mass matrices in the custodial Randall-Sundrum model with flavor changing top decays

    NASA Astrophysics Data System (ADS)

    Chang, We-Fu; Ng, John N.; Wu, Jackson M. S.

    2008-11-01

    We study quark mass matrices in the Randall-Sundrum (RS) model with bulk symmetry SU(2)L×SU(2)R×U(1)B-L. The Yukawa couplings are assumed to be within an order of magnitude of each other, and perturbative. We find that quark mass matrices of the symmetrical form proposed by Koide et al. [Y. Koide, H. Nishiura, K. Matsuda, T. Kikuchi, and T. Fukuyama, Phys. Rev. D 66, 093006 (2002)PRVDAQ0556-282110.1103/PhysRevD.66.093006] can be accommodated in the RS framework with the assumption of hierarchyless Yukawa couplings, but not the Hermitian Fritzsch-type mass matrices. General asymmetrical mass matrices are also found which fit well simultaneously with the quark masses and the Cabibbo-Kobayashi-Maskawa matrix. Both left-handed (LH) and right-handed (RH) quark rotation matrices are obtained that allow analysis of flavor changing decay of both LH and RH top quarks. At a warped down scale of 1.65 TeV, the total branching ratio of t→Z+jets can be as high as ˜5×10-6 for symmetrical mass matrices and ˜2×10-5 for asymmetrical ones. This level of signal is within reach of the LHC.

  17. Top-down mass spectrometry of hybrid materials with hydrophobic peptide and hydrophilic or hydrophobic polymer blocks.

    PubMed

    Alalwiat, Ahlam; Grieshaber, Sarah E; Paik, Bradford A; Kiick, Kristi L; Jia, Xinqiao; Wesdemiotis, Chrys

    2015-11-21

    A multidimensional mass spectrometry (MS) methodology is introduced for the molecular level characterization of polymer-peptide (or polymer-protein) copolymers that cannot be crystallized or chromatographically purified. It encompasses electrospray ionization (ESI) or matrix-assisted laser desorption ionization (MALDI) coupled with mass analysis, tandem mass spectrometry (MS(2)) and gas-phase separation by ion mobility mass spectrometry (IM-MS). The entire analysis is performed in the mass spectrometer ("top-down" approach) within milliseconds and with high sensitivity, as demonstrated for hybrid materials composed of hydrophobic poly(tert-butyl acrylate) (PtBA) or hydrophilic poly(acrylic acid) (PAA) blocks tethered to the hydrophobic decapeptide VPGVGVPGVG (VG2) via triazole linkages. The composition of the major products can be rapidly surveyed by MALDI-MS and MS(2). For a more comprehensive characterization, the ESI-IM-MS (and MS(2)) combination is more suitable, as it separates the hybrid materials based on their unique charges and shapes from unconjugated polymer and partially hydrolyzed products. Such separation is essential for reducing spectral congestion, deconvoluting overlapping compositions and enabling straightforward structural assignments, both for the hybrid copolymers as well as the polymer and peptide reactants. The IM dimension also permits the measurement of collision cross-sections (CCSs), which reveal molecular architecture. The MS and MS(2) spectra of the mobility separated ions conclusively showed that [PtBA-VG2]m and [PAA-VG2]m chains with the expected compositions and sequences were formed. Single and double copolymer blocks (m = 1-2) could be detected. Further, the CCSs of the hybrids, which were prepared via azide/alkyne cycloadditions, confirmed the formation of macrocyclic structures. The top-down methodology described would be particularly useful for the detection and identification of peptide/protein-polymer conjugates which are

  18. A precise measurement of the top quark mass in dilepton final states using 9.7 fb$^{-1}$ of D{Ø} Run II data

    SciTech Connect

    Liu, Huanzhao

    2015-05-16

    The top quark is a very special fundamental particle in the Standard Model (SM) mainly due to its heavy mass. The top quark has extremely short lifetime and decays before hadronization. This reduces the complexity for the measurement of its mass. The top quark couples very strongly to the Higgs boson since the fermion-Higgs Yukawa coupling linearly depends on the fermion’s mass. Therefore, the top quark is also heavily involved in Higgs production and related study. A precise measurement of the top quark mass is very important, as it allows for self-consistency check of the SM, and also gives a insight about the stability of our universe in the SM context. This dissertation presents my work on the measurement of the top quark mass in dilepton final states of t$\\bar{t}$ events in p$\\bar{p}$ collisions at √s = 1.96 TeV, using the full DØ Run II data corresponding to an integrated luminosity of 9.7 fb-1 at the Fermilab Tevatron. I extracted the top quark mass by reconstructing event kinematics, and integrating over expected neutrino rapidity distributions to obtain solutions over a scanned range of top quark mass hypotheses. The analysis features a comprehensive optimization that I made to minimize the expected statistical uncertainty. I also improve the calibration of jets in dilepton events by using the calibration determined in t$\\bar{t}$ → lepton+jets events, which reduces the otherwise limiting systematic uncertainty from the jet energy scale. The measured mass is 173.11 ± 1.34(stat)+0.83 -0.72(sys) GeV .

  19. Measurement of the top-quark mass in the fully hadronic decay channel from ATLAS data at √s=7 TeV

    SciTech Connect

    Aad, G.; Abbott, B.; Abdallah, J.; Khalek, S. Abdel; Abdinov, O.; Aben, R.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; Abulaiti, Y.; Acharya, B. S.; Adamczyka, L.; Adams, D. L.; Adelman, J.; Adomeit, S.; Adye, T.

    2015-04-23

    In this study, the mass of the top quark is measured in a data set corresponding to 4.6 fb-1 of proton–proton collisions with centre-of-mass energy √s=7 TeV collected by the ATLAS detector at the LHC. Events consistent with hadronic decays of top–antitop quark pairs with at least six jets in the final state are selected. The substantial background from multijet production is modelled with data-driven methods that utilise the number of identified b-quark jets and the transverse momentum of the sixth leading jet, which have minimal correlation. The top-quark mass is obtained from template fits to the ratio of three-jet to dijet mass. The three-jet mass is calculated from the three jets produced in a top-quark decay. Using these three jets the dijet mass is obtained from the two jets produced in the W boson decay. The top-quark mass obtained from this fit is thus less sensitive to the uncertainty in the energy measurement of the jets. A binned likelihood fit yields a top-quark mass of mt=175.1±1.4(stat.) ±1.2(syst.) GeV.

  20. Measurement of the top-quark mass in the fully hadronic decay channel from ATLAS data at √s=7 TeV

    DOE PAGESBeta

    Aad, G.; Abbott, B.; Abdallah, J.; Khalek, S. Abdel; Abdinov, O.; Aben, R.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; et al

    2015-04-23

    In this study, the mass of the top quark is measured in a data set corresponding to 4.6 fb-1 of proton–proton collisions with centre-of-mass energy √s=7 TeV collected by the ATLAS detector at the LHC. Events consistent with hadronic decays of top–antitop quark pairs with at least six jets in the final state are selected. The substantial background from multijet production is modelled with data-driven methods that utilise the number of identified b-quark jets and the transverse momentum of the sixth leading jet, which have minimal correlation. The top-quark mass is obtained from template fits to the ratio of three-jetmore » to dijet mass. The three-jet mass is calculated from the three jets produced in a top-quark decay. Using these three jets the dijet mass is obtained from the two jets produced in the W boson decay. The top-quark mass obtained from this fit is thus less sensitive to the uncertainty in the energy measurement of the jets. A binned likelihood fit yields a top-quark mass of mt=175.1±1.4(stat.) ±1.2(syst.) GeV.« less

  1. Identification of Two Reactive Cysteine Residues in the Tumor Suppressor Protein p53 Using Top-Down FTICR Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Scotcher, Jenna; Clarke, David J.; Weidt, Stefan K.; Mackay, C. Logan; Hupp, Ted R.; Sadler, Peter J.; Langridge-Smith, Pat R. R.

    2011-05-01

    The tumor suppressor p53 is a redox-regulated transcription factor involved in cell cycle arrest, apoptosis and senescence in response to multiple forms of stress, as well as many other cellular processes such as DNA repair, glycolysis, autophagy, oxidative stress and differentiation. The discovery of cysteine-targeting compounds that cause re-activation of mutant p53 and the death of tumor cells in vivo has emphasized the functional importance of p53 thiols. Using a combination of top-down and middle-down FTICR mass spectrometry, we show that of the 10 Cys residues in the core domain of wild-type p53, Cys182 and Cys277 exhibit a remarkable preference for modification by the alkylating reagent N-ethylmaleimide. The assignment of Cys182 and Cys277 as the two reactive Cys residues was confirmed by site-directed mutagenesis. Further alkylation of p53 beyond Cys182 and Cys277 was found to trigger co-operative modification of the remaining seven Cys residues and protein unfolding. This study highlights the power of top-down FTICR mass spectrometry for analysis of the cysteine reactivity and redox chemistry in multiple cysteine-containing proteins.

  2. Combination of CDF and D0 results on the mass of the top quark using up to 9.7 fb$^{-1}$ at the Tevatron

    SciTech Connect

    Tevatron Electroweak Working Group, Tevatron Group

    2014-07-10

    We summarize the current top-quark mass measurements from the CDF and D0 experiments at Fermilab. We combine published Run I (1992--1996) results with the most precise published and preliminary Run II (2001--2011) measurements based on data corresponding to up to 9.7 fb$^{-1}$ of $p\\bar{p}$ collisions. Taking correlations of uncertainties into account, and combining the statistical and systematic uncertainties, the resulting preliminary Tevatron average mass of the top quark is $M_{top} = 174.34 \\pm 0.64 ~GeV/c^2$, corresponding to a relative precision of 0.37%.

  3. The use of Galerkin finite-element methods to solve mass-transport equations

    USGS Publications Warehouse

    Grove, David B.

    1977-01-01

    The partial differential equation that describes the transport and reaction of chemical solutes in porous media was solved using the Galerkin finite-element technique. These finite elements were superimposed over finite-difference cells used to solve the flow equation. Both convection and flow due to hydraulic dispersion were considered. Linear and Hermite cubic approximations (basis functions) provided satisfactory results: however, the linear functions were computationally more efficient for two-dimensional problems. Successive over relaxation (SOR) and iteration techniques using Tchebyschef polynomials were used to solve the sparce matrices generated using the linear and Hermite cubic functions, respectively. Comparisons of the finite-element methods to the finite-difference methods, and to analytical results, indicated that a high degree of accuracy may be obtained using the method outlined. The technique was applied to a field problem involving an aquifer contaminated with chloride, tritium, and strontium-90. (Woodard-USGS)

  4. Top-Down Mass Analysis of Protein Tyrosine Nitration: Comparison of Electron Capture Dissociation with “Slow-Heating” Tandem Mass Spectrometry Methods

    PubMed Central

    2010-01-01

    Tyrosine nitration in proteins is an important post-translational modification (PTM) linked to various pathological conditions. When multiple potential sites of nitration exist, tandem mass spectrometry (MS/MS) methods provide unique tools to locate the nitro-tyrosine(s) precisely. Electron capture dissociation (ECD) is a powerful MS/MS method, different in its mechanisms to the “slow-heating” threshold fragmentation methods, such as collision-induced dissociation (CID) and infrared multiphoton dissociation (IRMPD). Generally, ECD provides more homogeneous cleavage of the protein backbone and preserves labile PTMs. However recent studies in our laboratory demonstrated that ECD of doubly charged nitrated peptides is inhibited by the large electron affinity of the nitro group, while CID efficiency remains unaffected by nitration. Here, we have investigated the efficiency of ECD versus CID and IRMPD for top-down MS/MS analysis of multiply charged intact nitrated protein ions of myoglobin, lysozyme, and cytochrome c in a commercial Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. CID and IRMPD produced more cleavages in the vicinity of the sites of nitration than ECD. However the total number of ECD fragments was greater than those from CID or IRMPD, and many ECD fragments contained the site(s) of nitration. We conclude that ECD can be used in the top-down analysis of nitrated proteins, but precise localization of the sites of nitration may require either of the “slow-heating” methods. PMID:20677807

  5. Characterization of intact protein conjugates and biopharmaceuticals using ion-exchange chromatography with online detection by native electrospray ionization mass spectrometry and top-down tandem mass spectrometry.

    PubMed

    Muneeruddin, Khaja; Nazzaro, Mark; Kaltashov, Igor A

    2015-10-01

    Characterization of biopharmaceutical products is a challenging task, which needs to be carried out at several different levels (including both primary structure and conformation). An additional difficulty frequently arises due to the structural heterogeneity inherent to many protein-based therapeutics (e.g., extensive glycosylation or "designer" modifications such as chemical conjugation) or introduced postproduction as a result of stress (e.g., oxidation and deamidation). A combination of ion-exchange chromatography (IXC) with online detection by native electrospray ionization mass spectrometry (ESI MS) allows characterization of complex and heterogeneous therapeutic proteins and protein conjugates to be accomplished at a variety of levels without compromising their conformational integrity. The IXC/ESI MS measurements allow protein conjugates to be profiled by analyzing conjugation stoichiometry and the presence of multiple positional isomers, as well as to establish the effect of chemical modifications on the conformational integrity of each species. While mass profiling alone is not sufficient for identification of nonenzymatic post-translational modifications (PTMs) that result in a very small mass change of the eluting species (e.g., deamidation), this task can be completed using online top-down structural analysis, as demonstrated using stressed interferon-β as an example. The wealth of information that can be provided by IXC/native ESI MS and tandem mass spectrometry (MS/MS) on protein-based therapeutics will undoubtedly make it a very valuable addition to the experimental toolbox of biopharmaceutical analysis. PMID:26360183

  6. Chemistry of the Sagittarius dwarf galaxy: A top-light initial mass function, outflows, and the R-process

    SciTech Connect

    McWilliam, Andrew; Wallerstein, George; Mottini, Marta E-mail: walleg@u.washington.edu

    2013-12-01

    From chemical abundance analysis of stars in the Sagittarius dwarf spheroidal galaxy (Sgr), we conclude that the α-element deficiencies cannot be due to the Type Ia supernova (SN Ia) time-delay scenario of Tinsley. Instead, the evidence points to low [α/Fe] ratios resulting from an initial mass function (IMF) deficient in the highest mass stars. The critical evidence is the 0.4 dex deficiency of [O/Fe], [Mg/Fe], and other hydrostatic elements, contrasting with the normal trend of r-process [Eu/Fe] {sub r} with [Fe/H]. Supporting evidence comes from the hydrostatic element (O, Mg, Na, Al, Cu) [X/Fe] ratios, which are inconsistent with iron added to the Milky Way (MW) disk trends. Also, the ratio of hydrostatic to explosive (Si, Ca, Ti) element abundances suggests a relatively top-light IMF. Abundance similarities with the LMC, Fornax, and IC 1613 suggest that their α-element deficiencies also resulted from IMFs lacking the most massive SNe II. The top-light IMF, as well as the normal trend of r-process [Eu/Fe] {sub r} with [Fe/H] in Sgr, indicates that massive SNe II (≳30 M {sub ☉}) are not major sources of r-process elements. High [La/Y] ratios, consistent with leaky-box chemical evolution, are confirmed but ∼0.3 dex larger than theoretical asymptotic giant branch (AGB) predictions. This suggests that a substantial increase in the theoretical {sup 13}C pocket in low-mass AGB stars is required. Sgr has the lowest [Rb/Zr] ratios known, consistent with pollution by low-mass (≲2 M {sub ☉}) AGB stars near [Fe/H] = –0.6, likely resulting from leaky-box chemical evolution. The [Cu/O] trends in Sgr and the MW suggest that Cu yields increase with both metallicity and stellar mass, as expected from Cu production by the weak s-process in massive stars. Finally, we present an updated hyperfine splitting line list, an abundance analysis of Arcturus, and further develop our error analysis formalism.

  7. Chemistry of the Sagittarius Dwarf Galaxy: A Top-light Initial Mass Function, Outflows, and the R-process

    NASA Astrophysics Data System (ADS)

    McWilliam, Andrew; Wallerstein, George; Mottini, Marta

    2013-12-01

    From chemical abundance analysis of stars in the Sagittarius dwarf spheroidal galaxy (Sgr), we conclude that the α-element deficiencies cannot be due to the Type Ia supernova (SN Ia) time-delay scenario of Tinsley. Instead, the evidence points to low [α/Fe] ratios resulting from an initial mass function (IMF) deficient in the highest mass stars. The critical evidence is the 0.4 dex deficiency of [O/Fe], [Mg/Fe], and other hydrostatic elements, contrasting with the normal trend of r-process [Eu/Fe] r with [Fe/H]. Supporting evidence comes from the hydrostatic element (O, Mg, Na, Al, Cu) [X/Fe] ratios, which are inconsistent with iron added to the Milky Way (MW) disk trends. Also, the ratio of hydrostatic to explosive (Si, Ca, Ti) element abundances suggests a relatively top-light IMF. Abundance similarities with the LMC, Fornax, and IC 1613 suggest that their α-element deficiencies also resulted from IMFs lacking the most massive SNe II. The top-light IMF, as well as the normal trend of r-process [Eu/Fe] r with [Fe/H] in Sgr, indicates that massive SNe II (gsim30 M ⊙) are not major sources of r-process elements. High [La/Y] ratios, consistent with leaky-box chemical evolution, are confirmed but ~0.3 dex larger than theoretical asymptotic giant branch (AGB) predictions. This suggests that a substantial increase in the theoretical 13C pocket in low-mass AGB stars is required. Sgr has the lowest [Rb/Zr] ratios known, consistent with pollution by low-mass (lsim2 M ⊙) AGB stars near [Fe/H] = -0.6, likely resulting from leaky-box chemical evolution. The [Cu/O] trends in Sgr and the MW suggest that Cu yields increase with both metallicity and stellar mass, as expected from Cu production by the weak s-process in massive stars. Finally, we present an updated hyperfine splitting line list, an abundance analysis of Arcturus, and further develop our error analysis formalism.

  8. Single amino acid sequence polymorphisms in rat cardiac troponin revealed by top-down tandem mass spectrometry.

    PubMed

    Sancho Solis, Raquel; Ge, Ying; Walker, Jeffery W

    2008-01-01

    Heterotrimeric cardiac troponin (cTn) is a critical component of the thin filament regulatory complex in cardiac muscle. Two of the three subunits, cTnI and cTnT, are subject to post-translational modifications such as proteolysis and phosphorylation, but linking modification patterns to function remains a major challenge. To obtain a global view of the biochemical state of cTn in native tissue, we performed high resolution top-down mass spectrometry of cTn heterotrimers from healthy adult rat hearts. cTn heterotrimers were affinity purified, desalted and then directly subjected to mass spectrometry using a 7 Tesla Thermo LTQ-FT-ICR instrument equipped with an ESI source. Molecular ions for N-terminally processed and acetylated cTnI and cTnT were readily detected as were other post-translationally modified forms of these proteins. cTnI was phosphorylated with a distribution of un-, mono- and bisphosphorylated forms of 41 +/- 3%, 46 +/- 1%, 13 +/- 3%, respectively. cTnT was predominantly monophosphorylated and partially proteolyzed at the Glu(29)-Pro(30) peptide bond. Also observed in high resolution spectra were 'shadow' peaks of similar intensity to 'parent' peaks exhibiting masses of cTnI+16 Da and cTnT+128 Da, subsequently shown by tandem mass spectrometry (MS/MS) to be single amino acid polymorphisms. Intact and protease-digested cTn subunits were fragmented by electron capture dissociation or collision activated dissociation to localize an Ala/Ser polymorphism at residue 7 of cTnI. Similar analysis of cTnT localized an additional Gln within a three residue alternative splice site beginning at residue 192. Besides being able to provide unique insights into the global state of post-translational modification of cTn subunits, high resolution top-down mass spectrometry readily revealed naturally occurring single amino acid sequence variants including a genetic polymorphism at residue 7 in cTnI, and an alternative splice isoform that affects a putative hinge region

  9. Evidence for a Mass Dependent Forward-Backward Asymmetry in Top Quark Pair Production

    SciTech Connect

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Apresyan, A.; Arisawa, T.; /Waseda U. /Dubna, JINR

    2011-01-01

    We present a new measurement of the inclusive forward-backward t{bar t} production asymmetry and its rapidity and mass dependence. The measurements are performed with data corresponding to an integrated luminosity of 5.3 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, recorded with the CDF II Detector at the Fermilab Tevatron. Significant inclusive asymmetries are observed in both the laboratory frame and the t{bar t} rest frame, and in both cases are found to be consistent with CP conservation under interchange of t and {bar t}. In the t{bar t} rest frame, the asymmetry is observed to increase with the t{bar t} rapidity difference, {Delta}y, and with the invariant mass M{sub t{bar t}} of the t{bar t} system. Fully corrected parton-level asymmetries are derived in two regions of each variable, and the asymmetry is found to be most significant at large {Delta}y and M{sub t{bar t}}. For M{sub t{bar t}} {ge} 450 GeV/c{sup 2}, the parton-level asymmetry in the t{bar t} rest frame is A{sup t{bar t}} = 0.475 {+-} 0.114 compared to a next-to-leading order QCD prediction of 0.088 {+-} 0.013.

  10. Native Electrospray and Electron-Capture Dissociation FTICR Mass Spectrometry for Top-Down Studies of Protein Assemblies

    SciTech Connect

    Zhang, Hao; Cui, Weidong; Wen, Jianzhong; Blankenship, Robert E.; Gross, Michael L.

    2011-07-15

    The high sensitivity, extended mass range, and fast data acquisition/processing of mass spectrometry and its coupling with native electrospray ionization (ESI) make the combination complementary to other biophysical methods of protein analysis. Protein assemblies with molecular masses up to MDa are now accessible by this approach. Most current approaches have used quadrupole/time-of-flight tandem mass spectrometry, sometimes coupled with ion mobility, to reveal stoichiometry, shape, and dissociation of protein assemblies. The amino-acid sequence of the subunits, however, still relies heavily on independent bottom-up proteomics. We describe here an approach to study protein assemblies that integrates electron-capture dissociation (ECD), native ESI, and FTICR mass spectrometry (12 T). Flexible regions of assembly subunits of yeast alcohol dehydrogenase (147 kDa), concanavalin A (103 kDa), and photosynthetic Fenna–Matthews–Olson antenna protein complex (140 kDa) can be sequenced by ECD or “activated-ion” ECD. Furthermore, noncovalent metal-binding sites can also be determined for the concanavalin A assembly. Most importantly, the regions that undergo fragmentation, either from one of the termini by ECD or from the middle of a protein, as initiated by CID, correlate well with the B-factor from X-ray crystallography of that protein. This factor is a measure of the extent an atom can move from its coordinated position as a function of temperature or crystal imperfections. The approach provides not only top-down proteomics information of the complex subunits but also structural insights complementary to those obtained by ion mobility.

  11. Fragmentation follows structure: top-down mass spectrometry elucidates the topology of engineered cystine-knot miniproteins.

    PubMed

    Reinwarth, Michael; Avrutina, Olga; Fabritz, Sebastian; Kolmar, Harald

    2014-01-01

    Over the last decades the field of pharmaceutically relevant peptides has enormously expanded. Among them, several peptide families exist that contain three or more disulfide bonds. In this context, elucidation of the disulfide patterns is extremely important as these motifs are often prerequisites for folding, stability, and activity. An example of this structure-determining pattern is a cystine knot which comprises three constrained disulfide bonds and represents a core element in a vast number of mechanically interlocked peptidic structures possessing different biological activities. Herein, we present our studies on disulfide pattern determination and structure elucidation of cystine-knot miniproteins derived from Momordica cochinchinensis peptide MCoTI-II, which act as potent inhibitors of human matriptase-1. A top-down mass spectrometric analysis of the oxidised and bioactive peptides is described. Following the detailed sequencing of the peptide backbone, interpretation of the MS(3) spectra allowed for the verification of the knotted topology of the examined miniproteins. Moreover, we found that the fragmentation pattern depends on the knottin's folding state, hence, tertiary structure, which to our knowledge has not been described for a top-down MS approach before. PMID:25303319

  12. Fragmentation Follows Structure: Top-Down Mass Spectrometry Elucidates the Topology of Engineered Cystine-Knot Miniproteins

    PubMed Central

    Reinwarth, Michael; Avrutina, Olga; Fabritz, Sebastian; Kolmar, Harald

    2014-01-01

    Over the last decades the field of pharmaceutically relevant peptides has enormously expanded. Among them, several peptide families exist that contain three or more disulfide bonds. In this context, elucidation of the disulfide patterns is extremely important as these motifs are often prerequisites for folding, stability, and activity. An example of this structure-determining pattern is a cystine knot which comprises three constrained disulfide bonds and represents a core element in a vast number of mechanically interlocked peptidic structures possessing different biological activities. Herein, we present our studies on disulfide pattern determination and structure elucidation of cystine-knot miniproteins derived from Momordica cochinchinensis peptide MCoTI-II, which act as potent inhibitors of human matriptase-1. A top-down mass spectrometric analysis of the oxidised and bioactive peptides is described. Following the detailed sequencing of the peptide backbone, interpretation of the MS3 spectra allowed for the verification of the knotted topology of the examined miniproteins. Moreover, we found that the fragmentation pattern depends on the knottin’s folding state, hence, tertiary structure, which to our knowledge has not been described for a top-down MS approach before. PMID:25303319

  13. Top physics at CDF

    SciTech Connect

    Julia Thom

    2004-06-24

    Precision studies of top quark properties are a primary goal of the Run II physics program at the Fermilab Tevatron. Marking the first stages of this program, the CDF collaboration presents recent results on top pair production cross section, single top physics and top mass, using between 109 and 200 pb{sup -1} of Run II data.

  14. Enhancing the Sensitivity to New Physics in the top-antitop Invariant Mass Distribution

    SciTech Connect

    Alvarez, Ezequiel; /Univ. Nacional San Luis /SLAC

    2012-06-14

    We propose selection cuts on the LHC t{bar t} production sample which should enhance the sensitivity to New Physics signals in the study of the t{bar t} invariant mass distribution. We show that selecting events in which the t{bar t} object has little transverse and large longitudinal momentum enlarges the quark-fusion fraction of the sample and therefore increases its sensitivity to New Physics which couples to quarks and not to gluons. We find that systematic error bars play a fundamental role and assume a simple model for them. We check how a non-visible new particle would become visible after the selection cuts enhance its resonance bump. A final realistic analysis should be done by the experimental groups with a correct evaluation of the systematic error bars.

  15. Measurement of top quark mass in the all hadronic channel in √s = 1.96 TeF, p$\\bar{p}$ collisions at D0

    SciTech Connect

    Lam, David Wai Kui

    2008-04-01

    A measurement of the top quark mass in proton-antiproton collisions at √s = 1.96 TeV using 1040fb-1 of data collected in D detector at Fermilab is presented. This analysis focuses on the all-hadronic decay mode of the top quark and therefore only events with six or more calorimeter jets in the final state are considered.

  16. Top-Down Analysis of Highly Post-Translationally Modified Peptides by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Guerrero, Andres; Lerno, Larry; Barile, Daniela; Lebrilla, Carlito B.

    2015-03-01

    Bovine κ-caseinoglycomacropeptide (GMP) is a highly modified peptide from κ-casein produced during the cheese making process. The chemical nature of GMP makes analysis by traditional proteomic approaches difficult, as the peptide bears a strong net negative charge and a variety of post-translational modifications. In this work, we describe the use of electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) for the top-down analysis of GMP. The method allows the simultaneous detection of different GMP forms that result from the combination of amino acid genetic variations and post-translational modifications, specifically phosphorylation and O-glycosylation. The different GMP forms were identified by high resolution mass spectrometry in both negative and positive mode and confirmation was achieved by tandem MS. The results showed the predominance of two genetic variants of GMP that occur as either mono- or bi-phosphorylated species. Additionally, these four forms can be modified with up to two O-glycans generally sialylated. The results demonstrate the presence of glycosylated, bi-phosphorylated forms of GMP never described before.

  17. Determination of the top-quark pole mass using tt¯ + 1-jet events collected with the ATLAS experiment in 7TeV pp collisions

    SciTech Connect

    Aad, G.; Abbott, B.; Abdallah, J.; Abdel Khalek, S.; Abdinov, O.; Aben, R.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; Abreu, H.; Abreu, R.; Abulaiti, Y.; Acharya, B. S.; Adamczyk, L.; Adams, D. L.; Adelman, J.; Adomeit, S.; Adye, T.; Agatonovic-Jovin, T.; Aguilar-Saavedra, J. A.; Agustoni, M.; Ahlen, S. P.; Ahmadov, F.; Aielli, G.; Akerstedt, H.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Alberghi, G. L.; Albert, J.; Albrand, S.; Alconada Verzini, M. J.; Aleksa, M.; Aleksandrov, I. N.; Alexa, C.; Alexander, G.; Alexopoulos, T.; Alhroob, M.; Alimonti, G.; Alio, L.; Alison, J.; Allbrooke, B. M. M.; Allison, L. J.; Allport, P. P.; Aloisio, A.; Alonso, A.; Alonso, F.; Alpigiani, C.; Altheimer, A.; Alvarez Gonzalez, B.; Alviggi, M. G.; Amako, K.; Amaral Coutinho, Y.; Amelung, C.; Amidei, D.; Amor Dos Santos, S. P.; Amorim, A.; Amoroso, S.; Amram, N.; Amundsen, G.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Anduaga, X. S.; Angelidakis, S.; Angelozzi, I.; Anger, P.; Angerami, A.; Anghinolfi, F.; Anisenkov, A. V.; Anjos, N.; Annovi, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoki, M.; Aperio Bella, L.; Arabidze, G.; Arai, Y.; Araque, J. P.; Arce, A. T. H.; Arduh, F. A.; Arguin, J-F.; Argyropoulos, S.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnal, V.; Arnold, H.; Arratia, M.; Arslan, O.; Artamonov, A.; Artoni, G.; Asai, S.; Asbah, N.; Ashkenazi, A.; Åsman, B.; Asquith, L.; Assamagan, K.; Astalos, R.; Atkinson, M.; Atlay, N. B.; Auerbach, B.; Augsten, K.; Aurousseau, M.; Avolio, G.; Axen, B.; Ayoub, M. K.; Azuelos, G.; Baak, M. A.; Baas, A. E.; Bacci, C.; Bachacou, H.; Bachas, K.; Backes, M.; Backhaus, M.; Bagiacchi, P.; Bagnaia, P.; Bai, Y.; Bain, T.; Baines, J. T.; Baker, O. K.; Balek, P.; Balestri, T.; Balli, F.; Banas, E.; Banerjee, Sw.; Bannoura, A. A. E.; Bansil, H. S.; Barak, L.; Barberio, E. L.; Barberis, D.; Barbero, M.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnes, S. L.; Barnett, B. M.; Barnett, R. M.; Barnovska, Z.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Bartoldus, R.; Barton, A. E.; Bartos, P.; Bassalat, A.; Basye, A.; Bates, R. L.; Batista, S. J.; Batley, J. R.; Battaglia, M.; Bauce, M.; Bauer, F.; Bawa, H. S.; Beacham, J. B.; Beattie, M. D.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Becker, K.; Becker, S.; Beckingham, M.; Becot, C.; Beddall, A. J.; Beddall, A.; Bednyakov, V. A.; Bee, C. P.; Beemster, L. J.; Beermann, T. A.; Begel, M.; Behr, J. K.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellerive, A.; Bellomo, M.; Belotskiy, K.; Beltramello, O.; Benary, O.; Benchekroun, D.; Bender, M.; Bendtz, K.; Benekos, N.; Benhammou, Y.; Benhar Noccioli, E.; Benitez Garcia, J. A.; Benjamin, D. P.; Bensinger, J. R.; Bentvelsen, S.; Beresford, L.; Beretta, M.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Beringer, J.; Bernard, C.; Bernard, N. R.; Bernius, C.; Bernlochner, F. U.; Berry, T.; Berta, P.; Bertella, C.; Bertoli, G.; Bertolucci, F.; Bertsche, C.; Bertsche, D.; Besana, M. I.; Besjes, G. J.; Bessidskaia Bylund, O.; Bessner, M.; Besson, N.; Betancourt, C.; Bethke, S.; Bevan, A. J.; Bhimji, W.; Bianchi, R. M.; Bianchini, L.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Biglietti, M.; Bilbao De Mendizabal, J.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Black, C. W.; Black, J. E.; Black, K. M.; Blackburn, D.; Blair, R. E.; Blanchard, J. -B.; Blanco, J. E.; Blazek, T.; Bloch, I.; Blocker, C.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. S.; Bocchetta, S. S.; Bocci, A.; Bock, C.; Boehler, M.; Bogaerts, J. A.; Bogdanchikov, A. G.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Boldyrev, A. S.; Bomben, M.; Bona, M.; Boonekamp, M.; Borisov, A.; Borissov, G.; Borroni, S.; Bortfeldt, J.; Bortolotto, V.; Bos, K.; Boscherini, D.; Bosman, M.; Boudreau, J.; Bouffard, J.; Bouhova-Thacker, E. V.; Boumediene, D.; Bourdarios, C.; Bousson, N.; Boutouil, S.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozic, I.; Bracinik, J.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brazzale, S. F.; Brendlinger, K.; Brennan, A. J.; Brenner, L.; Brenner, R.; Bressler, S.; Bristow, K.; Bristow, T. M.; Britton, D.; Britzger, D.; Brochu, F. M.; Brock, I.; Brock, R.; Bronner, J.; Brooijmans, G.; Brooks, T.; Brooks, W. K.; Brosamer, J.; Brost, E.; Brown, J.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Bruni, A.; Bruni, G.; Bruschi, M.; Bryngemark, L.; Buanes, T.; Buat, Q.; Buchholz, P.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Buehrer, F.; Bugge, L.; Bugge, M. K.; Bulekov, O.

    2015-10-19

    In this study, the normalized differential cross section for top-quark pair production in association with at least one jet is studied as a function of the inverse of the invariant mass of the tt¯ + 1-jet system. This distribution can be used for a precise determination of the top-quark mass since gluon radiation depends on the mass of the quarks. The experimental analysis is based on proton-proton collision data collected by the ATLAS detector at the LHC with a centre-of-mass energy of 7 TeV corresponding to an integrated luminosity of 4.6 fb–1 . The selected events were identified using the lepton+jets top-quark-pair decay channel, where lepton refers to either an electron or a muon. The observed distribution is compared to a theoretical prediction at next-to-leading-order accuracy in quantum chromodynamics using the pole-mass scheme. With this method, the measured value of the top-quark pole mass, mpolet , is: mpolet = 173.7 ± 1.5(stat.) ± 1.4(syst.)+1.0–0.5(theory) GeV.

  18. Measurement of the top-quark mass in the lepton+jets channel using a matrix element technique with the CDF II detector

    DOE PAGESBeta

    Aaltonen, T.

    2011-10-14

    A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy √s = 1.96 TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of tt̄ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event probability density functions are calculated using signal and background matrix elements, as well as a set of parameterized jet-to-parton transfer functions. The likelihood function is maximized with respect to the top-quark mass, the signal fraction in the sample, and amore » correction to the jet energy scale (JES) calibration of the calorimeter jets. The simultaneous measurement of the JES correction ({Delta}{sub JES}) amounts to an additional in situ jet energy calibration based on the known mass of the hadronically decaying W boson. Using the data sample of 578 lepton+jets candidate events, corresponding to 3.2 fb-1 of integrated luminosity, the top-quark mass is measured to be mt = 172.4± 1.4 (stat + ΔJES) ± 1.3 (syst) GeV/c2.« less

  19. Determination of the top-quark pole mass using tt¯ + 1-jet events collected with the ATLAS experiment in 7TeV pp collisions

    DOE PAGESBeta

    Aad, G.; Abbott, B.; Abdallah, J.; Abdel Khalek, S.; Abdinov, O.; Aben, R.; Abi, B.; Abolins, M.; AbouZeid, O. S.; Abramowicz, H.; et al

    2015-10-19

    In this study, the normalized differential cross section for top-quark pair production in association with at least one jet is studied as a function of the inverse of the invariant mass of the tt¯ + 1-jet system. This distribution can be used for a precise determination of the top-quark mass since gluon radiation depends on the mass of the quarks. The experimental analysis is based on proton-proton collision data collected by the ATLAS detector at the LHC with a centre-of-mass energy of 7 TeV corresponding to an integrated luminosity of 4.6 fb–1 . The selected events were identified using themore » lepton+jets top-quark-pair decay channel, where lepton refers to either an electron or a muon. The observed distribution is compared to a theoretical prediction at next-to-leading-order accuracy in quantum chromodynamics using the pole-mass scheme. With this method, the measured value of the top-quark pole mass, mpolet , is: mpolet = 173.7 ± 1.5(stat.) ± 1.4(syst.)+1.0–0.5(theory) GeV.« less

  20. Measurement of the top-quark mass in the lepton+jets channel using a matrix element technique with the CDF II detector

    SciTech Connect

    Aaltonen, T.

    2011-10-14

    A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy √s = 1.96 TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of tt̄ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event probability density functions are calculated using signal and background matrix elements, as well as a set of parameterized jet-to-parton transfer functions. The likelihood function is maximized with respect to the top-quark mass, the signal fraction in the sample, and a correction to the jet energy scale (JES) calibration of the calorimeter jets. The simultaneous measurement of the JES correction ({Delta}{sub JES}) amounts to an additional in situ jet energy calibration based on the known mass of the hadronically decaying W boson. Using the data sample of 578 lepton+jets candidate events, corresponding to 3.2 fb-1 of integrated luminosity, the top-quark mass is measured to be mt = 172.4± 1.4 (stat + ΔJES) ± 1.3 (syst) GeV/c2.

  1. Chip-type asymmetrical flow field-flow fractionation channel coupled with mass spectrometry for top-down protein identification.

    PubMed

    Kim, Ki Hun; Moon, Myeong Hee

    2011-11-15

    A chip-type design asymmetrical flow field-flow fractionation (AF4) channel has been developed for high-speed separation of proteins and top-down proteomic analysis using online coupled electrospray ionization mass spectrometry (ESI-MS). The new miniaturized AF4 channel was assembled by stacking multilayer thin stainless steel (SS, 1.5 mm each) plates embedded with an SS frit in such a way that the total thickness of the channel assembly was about 6 mm. The efficiency of the miniaturized AF4 channel at different channel lengths was examined with the separation of protein standards by adjusting flow rates in which an identical effective channel flow rate or an identical void time can be maintained at different channels. Detection limit, overloading effect, reproducibility, and influence of channel membrane materials on separation efficiency were investigated. Desalting and purification of proteins achieved during the AF4 operation by the action of an exiting crossflow and the use of aqueous mass-spectrometry-compatible (MS-compatible) buffer were advantageous for online coupling of the chip-type AF4 with ESI-MS. The direct coupling of AF4 and ESI-MS capabilities was demonstrated for the high-speed separation and identification of carbonic anhydrase (29 kDa) and transferrin (78 kDa) by full scan MS and for the first top-down identification of proteins with AF4-ESI-MS-MS using collision-induced fragmentation (CID). The presence of intact dimers (156 kDa) of transferrin was confirmed by AF4-ESI-MS via size separation of the dimers from monomers, followed by multiply charged ion spectral analysis of the dimers and molecular mass determinations. It was also found from these experiments that AF4-ESI-MS analysis of transferrin exhibited an increased signal-to-noise ratio compared to that of direct ESI-MS analysis due to online purification of the protein sample and size separation of dimers with AF4. PMID:21981549

  2. Measurement of the top quark mass using charged particles in p p collisions at √{s }=8 TeV

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Flechl, M.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rad, N.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; De Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; Van De Klundert, M.; Van Haevermaet, H.; Van Mechelen, P.; Van Remortel, N.; Van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; De Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moortgat, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; Van Doninck, W.; Van Mulders, P.; Van Parijs, I.; Brun, H.; Caillol, C.; Clerbaux, B.; De Lentdecker, G.; Fasanella, G.; Favart, L.; Goldouzian, R.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Randle-conde, A.; Seva, T.; Vander Velde, C.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; Mccartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Schöfbeck, R.; Sigamani, M.; Tytgat, M.; Van Driessche, W.; Yazgan, E.; Zaganidis, N.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; De Visscher, S.; Delaere, C.; Delcourt, M.; Forthomme, L.; Francois, B.; Giammanco, A.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Magitteri, A.; Mertens, A.; Musich, M.; Nuttens, C.; Piotrzkowski, K.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Wertz, S.; Beliy, N.; Hammad, G. H.; Aldá Júnior, W. L.; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; Da Costa, E. M.; De Jesus Damiao, D.; De Oliveira Martins, C.; Fonseca De Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mora Herrera, C.; Mundim, L.; Nogima, H.; Prado Da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; De Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Fang, W.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Leggat, D.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Ferencek, D.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Finger, M.; Finger, M.; Carrera Jarrin, E.; Awad, A.; Elgammal, S.; Mohamed, A.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Perrini, L.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Peltola, T.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Abdulsalam, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Davignon, O.; Dobrzynski, L.; Granier de Cassagnac, R.; Jo, M.; Lisniak, S.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.; Merlin, J. A.; Skovpen, K.; Van Hove, P.; Gadrat, S.; Beauceron, S.; Bernet, C.; Boudoul, G.; Bouvier, E.

    2016-05-01

    A novel technique for measuring the mass of the top quark that uses only the kinematic properties of its charged decay products is presented. Top quark pair events with final states with one or two charged leptons and hadronic jets are selected from the data set of 8 TeV proton-proton collisions, corresponding to an integrated luminosity of 19.7 fb-1 . By reconstructing secondary vertices inside the selected jets and computing the invariant mass of the system formed by the secondary vertex and an isolated lepton, an observable is constructed that is sensitive to the top quark mass that is expected to be robust against the energy scale of hadronic jets. The main theoretical systematic uncertainties, concerning the modeling of the fragmentation and hadronization of b quarks and the reconstruction of secondary vertices from the decays of b hadrons, are studied. A top quark mass of 173.68 ±0.20 (stat)-0.97 +1.58(syst ) GeV is measured. The overall systematic uncertainty is dominated by the uncertainty in the b quark fragmentation and the modeling of kinematic properties of the top quark.

  3. Temperature evolution and mass losses during immersion vacuum cooling of cooked beef joints - A finite difference model.

    PubMed

    Drummond, Liana; Sun, Da-Wen

    2008-11-01

    A finite difference model was developed to describe and predict the temperature and mass loss evolution in reconstructed beef joints during immersion vacuum cooling. Fast cooling is obtained within beef pores and at beef surface when evaporation in the surrounding liquid is high. The cooling rate diminishes as the vacuum chamber pressure stabilizes and the liquid temperature reaches its lower value. The maximum deviation between measured and calculated temperatures was within 5°C for the beef (core and surface) and within 7°C for the surrounding liquid (measured at the bottom of the container). Absolute differences between predicted and experimental mass losses for the liquid and beef sample were around 2% and 1%, respectively. Mass losses are higher during the first period when evaporation is the main mode of heat transfer. Mechanical agitation in the surrounding liquid is suggested as a way to further reduce cooling times and to prevent uneven cooling. PMID:22063613

  4. Combination of CDF and D0 results on the mass of the top quark using up to 5.8~fb-1 of data

    SciTech Connect

    Lancaster, Mark; /Fermilab

    2011-07-01

    We summarize the top-quark mass measurements from the CDF and D0 experiments at Fermilab. We combine published Run I (1992--1996) measurements with the most precise published and preliminary Run II (2001--present) measurements using up to 5.8 fb{sup -1} of data, adding new analyses (the missing transverse energy plus jets analysis) and updating old ones. Taking uncertainty correlations into account, and adding in quadrature the statistical and systematic uncertainties, the resulting preliminary Tevatron average mass of the top quark is M{sub t} = 173.2 {+-} 0.9 GeV/c{sup 2}.

  5. Computation with Inverse States in a Finite Field FP: The Muon Neutrino Mass, the Unified Strong-Electroweak Coupling Constant, and the Higgs Mass

    SciTech Connect

    DAI,YANG; BORISOV,ALEXEY B.; BOYER,KEITH; RHODES,CHARLES K.

    2000-08-11

    The construction of inverse states in a finite field F{sub P{sub {alpha}}} enables the organization of the mass scale with fundamental octets in an eight-dimensional index space that identifies particle states with residue class designations. Conformance with both CPT invariance and the concept of supersymmetry follows as a direct consequence of this formulation. Based on two parameters (P{sub {alpha}} and g{sub {alpha}}) that are anchored on a concordance of physical data, this treatment leads to (1) a prospective mass for the muon neutrino of {approximately}27.68 meV, (2) a value of the unified strong-electroweak coupling constant {alpha}* = (34.26){sup {minus}1} that is physically defined by the ratio of the electron neutrino and muon neutrino masses, and (3) a see-saw congruence connecting the Higgs, the electron neutrino, and the muon neutrino masses. Specific evaluation of the masses of the corresponding supersymmetric Higgs pair reveals that both particles are superheavy (> 10{sup 18}GeV). No renormalization of the Higgs masses is introduced, since the calculational procedure yielding their magnitudes is intrinsically divergence-free. Further, the Higgs fulfills its conjectured role through the see-saw relation as the particle defining the origin of all particle masses, since the electron and muon neutrino systems, together with their supersymmetric partners, are the generators of the mass scale and establish the corresponding index space. Finally, since the computation of the Higgs masses is entirely determined by the modulus of the field P{sub {alpha}}, which is fully defined by the large-scale parameters of the universe through the value of the universal gravitational constant G and the requirement for perfect flatness ({Omega} = 1.0), the see-saw congruence fuses the concepts of mass and space and creates a new unified archetype.

  6. Measurement of the Top Quark Mass at D0 Run II with the Matrix Element Method in the Lepton+Jets Final State

    SciTech Connect

    Schieferdecker, Philipp; /Munich U.

    2005-08-01

    The mass of the top quark is a fundamental parameter of the Standard Model. Its precise knowledge yields valuable insights into unresolved phenomena in and beyond the Standard Model. A measurement of the top quark mass with the matrix element method in the lepton+jets final state in D0 Run II is presented. Events are selected requiring an isolated energetic charged lepton (electron or muon), significant missing transverse energy, and exactly four calorimeter jets. For each event, the probabilities to originate from the signal and background processes are calculated based on the measured kinematics, the object resolutions and the respective matrix elements. The jet energy scale is known to be the dominant source of systematic uncertainty. The reference scale for the mass measurement is derived from Monte Carlo events. The matrix element likelihood is defined as a function of both, m{sub top} and jet energy scale JES, where the latter represents a scale factor with respect to the reference scale. The top mass is obtained from a two-dimensional correlated fit, and the likelihood yields both the statistical and jet energy scale uncertainty. Using a dataset of 320 pb{sup -1} of D0 Run II data, the mass of the top quark is measured to be: m{sub top}{sup {ell}+jets} = 169.5 {+-} 4.4(stat. + JES){sub -1.6}{sup +1.7}(syst.) GeV; m{sub top}{sup e+jets} = 168.8 {+-} 6.0(stat. + JES){sub -1.9}{sup +1.9}(syst.) GeV; m{sub top}{sup {mu}+jets} = 172.3 {+-} 9.6(stat.+JES){sub -3.3}{sup +3.4}(syst.) GeV. The jet energy scale measurement in the {ell}+jets sample yields JES = 1.034 {+-} 0.034, suggesting good consistency of the data with the simulation. The measurement forecasts significant improvements to the total top mass uncertainty during Run II before the startup of the LHC, as the data sample will grow by a factor of ten and D0's tracking capabilities will be employed in jet energy reconstruction and flavor identification.

  7. Measurement of the Top Quark Mass by Dynamical Likelihood Method using the Lepton + Jets Events with the Collider Detector at Fermilab

    SciTech Connect

    Kubo, Taichi

    2008-02-01

    We have measured the top quark mass with the dynamical likelihood method. The data corresponding to an integrated luminosity of 1.7fb-1 was collected in proton antiproton collisions at a center of mass energy of 1.96 TeV with the CDF detector at Fermilab Tevatron during the period March 2002-March 2007. We select t$\\bar{t}$ pair production candidates by requiring one high energy lepton and four jets, in which at least one of jets must be tagged as a b-jet. In order to reconstruct the top quark mass, we use the dynamical likelihood method based on maximum likelihood method where a likelihood is defined as the differential cross section multiplied by the transfer function from observed quantities to parton quantities, as a function of the top quark mass and the jet energy scale(JES). With this method, we measure the top quark mass to be 171.6 ± 2.0 (stat.+ JES) ± 1.3(syst.) = 171.6 ± 2.4 GeV/c2.

  8. Measurement of the Top Quark Mass and ppbar -> ttbar Cross Section in the All-Hadronic Mode with the CDFII Detector

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.; Apresyan, A.; /Purdue U. /Waseda U.

    2010-02-01

    We present a measurement of the top quark mass and of the top-antitop pair production cross section using p{bar p} data collected with the CDF II detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9 fb{sup -1}. We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale (JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8 {+-} 2.4(stat+JES){sub -1.0}{sup +1.2}(syst)GeV/c{sup 2}, where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure measures also the amount of signal from which we derive a cross section, {sigma}{sub t{bar t}} = 7.2 {+-} 0.5(stat) {+-} 1.0(syst) {+-} 0.4(lum) pb, for the measured values of top quark mass and JES.

  9. Measurement of the top quark pair production cross section in proton-antiproton collisions at a center of mass energy of 1.96 TeV, hadronic top decays with the D0 detector

    SciTech Connect

    Hegeman, Jeroen Guido

    2009-01-16

    Of the six quarks in the standard model the top quark is by far the heaviest: 35 times more massive than its partner the bottom quark and more than 130 times heavier than the average of the other five quarks. Its correspondingly small decay width means it tends to decay before forming a bound state. Of all quarks, therefore, the top is the least affected by quark confinement, behaving almost as a free quark. Its large mass also makes the top quark a key player in the realm of the postulated Higgs boson, whose coupling strengths to particles are proportional to their masses. Precision measurements of particle masses for e.g. the top quark and the W boson can hereby provide indirect constraints on the Higgs boson mass. Since in the standard model top quarks couple almost exclusively to bottom quarks (t → Wb), top quark decays provide a window on the standard model through the direct measurement of the Cabibbo-Kobayashi-Maskawa quark mixing matrix element Vtb. In the same way any lack of top quark decays into W bosons could imply the existence of decay channels beyond the standard model, for example charged Higgs bosons as expected in two-doublet Higgs models: t → H+b. Within the standard model top quark decays can be classified by the (lepton or quark) W boson decay products. Depending on the decay of each of the W bosons, t$\\bar{t}$ pair decays can involve either no leptons at all, or one or two isolated leptons from direct W → e$\\bar{v}${sub e} and W → μ$\\bar{v}$μ decays. Cascade decays like b → Wc → e$\\bar{v}$ec can lead to additional non-isolated leptons. The fully hadronic decay channel, in which both Ws decay into a quark-antiquark pair, has the largest branching fraction of all t$\\bar{t}$ decay channels and is the only kinematically complete (i.e. neutrino-less) channel. It lacks, however, the clear isolated lepton signature and is therefore hard to distinguish from the multi-jet QCD background. It

  10. Measurement of the top-quark mass in all-jets $$t\\bar{t}$$ events in pp collisions at $$\\sqrt{s}$$=7 TeV

    DOE PAGESBeta

    Chatrchyan, Serguei

    2013-07-17

    The mass of the top quark is measured using a sample ofmore » $$t\\bar{t}$$ candidate events with at least six jets in the final state. The sample is selected from data collected with the CMS detector in pp collisions at $$\\sqrt{s}$$ = 7 TeV in 2011 and corresponds to an integrated luminosity of 3.54 inverse femtobarns. The mass is reconstructed for each event employing a kinematic fit of the jets to a $$t\\bar{t}$$ hypothesis. The top-quark mass is measured to be 173.49 $$\\pm$$ 0.69 (stat.) $$\\pm$$ 1.21 (syst.) GeV. A combination with previously published measurements in other decay modes by CMS yields a mass of 173.54 $$\\pm$$ 0.33 (stat.) $$\\pm$$ 0.96 (syst.) GeV.« less

  11. Measurement of the top-quark mass in all-jets $t\\bar{t}$ events in pp collisions at $\\sqrt{s}$=7 TeV

    SciTech Connect

    Chatrchyan, Serguei

    2013-07-17

    The mass of the top quark is measured using a sample of $t\\bar{t}$ candidate events with at least six jets in the final state. The sample is selected from data collected with the CMS detector in pp collisions at $\\sqrt{s}$ = 7 TeV in 2011 and corresponds to an integrated luminosity of 3.54 inverse femtobarns. The mass is reconstructed for each event employing a kinematic fit of the jets to a $t\\bar{t}$ hypothesis. The top-quark mass is measured to be 173.49 $\\pm$ 0.69 (stat.) $\\pm$ 1.21 (syst.) GeV. A combination with previously published measurements in other decay modes by CMS yields a mass of 173.54 $\\pm$ 0.33 (stat.) $\\pm$ 0.96 (syst.) GeV.

  12. Top-down N-terminal sequencing of Immunoglobulin subunits with electrospray ionization time of flight mass spectrometry.

    PubMed

    Ren, Da; Pipes, Gary D; Hambly, David; Bondarenko, Pavel V; Treuheit, Michael J; Gadgil, Himanshu S

    2009-01-01

    An N-terminal top-down sequencing approach was developed for IgG characterization, using high-resolution HPLC separation and collisionally activated dissociation (CAD) on a single-stage LCT Premier time of flight (TOF) mass spectrometer. Fragmentation of the IgG chains on the LCT Premier was optimized by varying the ion guide voltage values. Ion guide 1 voltage had the most significant effect on the fragmentation of the IgG chains. An ion guide 1 voltage value of 100 V was found to be optimum for the N-terminal fragmentation of IgG heavy and light chains, which are approximately 50 and 25 kDa, respectively. The most prominent ion series in this CAD experiment was the terminal b-ion series which allows N-terminal sequencing. Using this technique, we were able to confirm the sequence of up to seven N-terminal residues. Applications of this method for the identification of N-terminal pyroglutamic acid formation will be discussed. The method described could be used as a high-throughput method for the rapid N-terminal sequencing of IgG chains and for the detection of chemical modifications in the terminal residues. PMID:18834850

  13. Top-down proteomics with mass spectrometry imaging: a pilot study towards discovery of biomarkers for neurodevelopmental disorders.

    PubMed

    Ye, Hui; Mandal, Rakesh; Catherman, Adam; Thomas, Paul M; Kelleher, Neil L; Ikonomidou, Chrysanthy; Li, Lingjun

    2014-01-01

    In the developing mammalian brain, inhibition of NMDA receptor can induce widespread neuroapoptosis, inhibit neurogenesis and cause impairment of learning and memory. Although some mechanistic insights into adverse neurological actions of these NMDA receptor antagonists exist, our understanding of the full spectrum of developmental events affected by early exposure to these chemical agents in the brain is still limited. Here we attempt to gain insights into the impact of pharmacologically induced excitatory/inhibitory imbalance in infancy on the brain proteome using mass spectrometric imaging (MSI). Our goal was to study changes in protein expression in postnatal day 10 (P10) rat brains following neonatal exposure to the NMDA receptor antagonist dizocilpine (MK801). Analysis of rat brains exposed to vehicle or MK801 and comparison of their MALDI MS images revealed differential relative abundances of several proteins. We then identified these markers such as ubiquitin, purkinje cell protein 4 (PEP-19), cytochrome c oxidase subunits and calmodulin, by a combination of reversed-phase (RP) HPLC fractionation and top-down tandem MS platform. More in-depth large scale study along with validation experiments will be carried out in the future. Overall, our findings indicate that a brief neonatal exposure to a compound that alters excitatory/inhibitory balance in the brain has a long term effect on protein expression patterns during subsequent development, highlighting the utility of MALDI-MSI as a discovery tool for potential biomarkers. PMID:24710523

  14. Measurement of the top quark mass using proton-proton data at √{(}s )=7 and 8 TeV

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Flechl, M.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; De Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; Van De Klundert, M.; Van Haevermaet, H.; Van Mechelen, P.; Van Remortel, N.; Van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; De Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; Van Doninck, W.; Van Mulders, P.; Van Onsem, G. P.; Van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; De Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-conde, A.; Reis, T.; Seva, T.; Vander Velde, C.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; Mccartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Strobbe, N.; Tytgat, M.; Van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; Da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Aldá Júnior, W. L.; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; Da Costa, E. M.; De Jesus Damiao, D.; De Oliveira Martins, C.; Fonseca De Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado Da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; De Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; El-khateeb, E.; Elkafrawy, T.; Mohamed, A.; Mohammed, Y.; Salama, E.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.

    2016-04-01

    A new set of measurements of the top quark mass are presented, based on the proton-proton data recorded by the CMS experiment at the LHC at √{s }=8 TeV corresponding to a luminosity of 19.7 fb-1 . The top quark mass is measured using the lepton+jets , all-jets and dilepton decay channels, giving values of 172.35 ±0.16 (stat )±0.48 (syst ) GeV , 172.32 ±0.25 (stat )±0.59 (syst ) GeV , and 172.82 ±0.19 (stat )±1.22 (syst ) GeV , respectively. When combined with the published CMS results at √{s }=7 TeV , they provide a top quark mass measurement of 172.44 ±0.13 (stat )±0.47 (syst ) GeV . The top quark mass is also studied as a function of the event kinematical properties in the lepton+jets decay channel. No indications of a kinematic bias are observed and the collision data are consistent with a range of predictions from current theoretical models of t t ¯ production.

  15. A Measurement of the mass of the Top Quark in the di-lepton channels using the D0 Detector at Fermilab

    SciTech Connect

    Fatakia, Sarosh Noshir

    2005-01-01

    This dissertation describes a measurement of the mass of the top quark using events consistent with the hypothesis t{bar t} {yields} bW{sup +} {bar b}W{sup -} {yields} bl{sup +}{nu}{bar b}l{sup -}{bar {nu}}, where (l=e,{mu}). The events are obtained from nearly 230 pb{sup -1} of p{bar p} collision data collected by the D0 experiment between 2002 and 2004 during Run II. In this decay channel two neutrinos remain undetected. Extraction of the mass of the top quark by kinematic reconstruction is not possible because the event is under-constrained. Therefore, a dynamical likelihood method is developed to obtain the mass of the top quark. The mass of top quark obtained from the candidate events selected in the di-electron channel and the e{mu} channel is: 154.1 {sup +14.2}{sub -12.8}(stat.) {+-}6.6 (syst.) GeV.

  16. Rapid Identification of Protein Biomarkers of E. coli O157:H7 by MALDI-TOF-TOF Mass Spectrometry and Top-Down Proteomics

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have identified six protein biomarkers from two strains of E. coli O157:H7 and one non-pathogenic E. coli strain by matrix-assisted laser desorption/ionization (MALDI) time-of-flight/time-of-flight tandem mass spectrometry (TOF/TOF-MS/MS) and top-down proteomics. Mature, intact proteins were ext...

  17. Measurement of the top quark mass at CDF using the `neutrino phi weighting' template method on a lepton plus isolated track sample

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Akimoto, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Apresyan, A.; /Purdue U. /Waseda U.

    2009-01-01

    We present a measurement of the top quark mass with t{bar t} dilepton events produced in p{bar p} collisions at the Fermilab Tevatron ({radical}s = 1.96 TeV) and collected by the CDF II detector. A sample of 328 events with a charged electron or muon and an isolated track, corresponding to an integrated luminosity of 2.9 fb{sup -1}, are selected as t{bar t} candidates. To account for the unconstrained event kinematics, we scan over the phase space of the azimuthal angles ({phi}{sub {nu}1}, {phi}{sub {nu}2}) of neutrinos and reconstruct the top quark mass for each {phi}{sub {nu}1}, {phi}{sub {nu}2} pair by minimizing a {chi}{sup 2} function in the t{bar t} dilepton hypothesis. We assign {chi}{sup 2}-dependent weights to the solutions in order to build a preferred mass for each event. Preferred mass distributions (templates) are built from simulated t{bar t} and background events, and parameterized in order to provide continuous probability density functions. A likelihood fit to the mass distribution in data as a weighted sum of signal and background probability density functions gives a top quark mass of 165.5{sub -3.3}{sup +3.4}(stat.){+-}3.1(syst.) GeV/c{sup 2}.

  18. Measurement of the top quark mass at CDF using the ``neutrino ϕ weighting'' template method on a lepton plus isolated track sample

    NASA Astrophysics Data System (ADS)

    Aaltonen, T.; Adelman, J.; Akimoto, T.; González, B. Álvarez; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Apresyan, A.; Arisawa, T.; Artikov, A.; Ashmanskas, W.; Attal, A.; Aurisano, A.; Azfar, F.; Azzurri, P.; Badgett, W.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Bartsch, V.; Bauer, G.; Beauchemin, P.-H.; Bedeschi, F.; Beecher, D.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Beringer, J.; Bhatti, A.; Binkley, M.; Bisello, D.; Bizjak, I.; Blair, R. E.; Blocker, C.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Boisvert, V.; Bolla, G.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brau, B.; Bridgeman, A.; Brigliadori, L.; Bromberg, C.; Brubaker, E.; Budagov, J.; Budd, H. S.; Budd, S.; Burke, S.; Burkett, K.; Busetto, G.; Bussey, P.; Buzatu, A.; Byrum, K. L.; Cabrera, S.; Calancha, C.; Campanelli, M.; Campbell, M.; Canelli, F.; Canepa, A.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Carron, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cavalli-Sforza, M.; Cerri, A.; Cerrito, L.; Chang, S. H.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Chlebana, F.; Cho, K.; Chokheli, D.; Chou, J. P.; Choudalakis, G.; Chuang, S. H.; Chung, K.; Chung, W. H.; Chung, Y. S.; Chwalek, T.; Ciobanu, C. I.; Ciocci, M. A.; Clark, A.; Clark, D.; Compostella, G.; Convery, M. E.; Conway, J.; Cordelli, M.; Cortiana, G.; Cox, C. A.; Cox, D. J.; Crescioli, F.; Almenar, C. Cuenca; Cuevas, J.; Culbertson, R.; Cully, J. C.; Dagenhart, D.; Datta, M.; Davies, T.; de Barbaro, P.; de Cecco, S.; Deisher, A.; de Lorenzo, G.; Dell'Orso, M.; Deluca, C.; Demortier, L.; Deng, J.; Deninno, M.; Derwent, P. F.; di Giovanni, G. P.; Dionisi, C.; di Ruzza, B.; Dittmann, J. R.; D'Onofrio, M.; Donati, S.; Dong, P.; Donini, J.; Dorigo, T.; Dube, S.; Efron, J.; Elagin, A.; Erbacher, R.; Errede, D.; Errede, S.; Eusebi, R.; Fang, H. C.; Farrington, S.; Fedorko, W. T.; Feild, R. G.; Feindt, M.; Fernandez, J. P.; Ferrazza, C.; Field, R.; Flanagan, G.; Forrest, R.; Frank, M. J.; Franklin, M.; Freeman, J. C.; Furic, I.; Gallinaro, M.; Galyardt, J.; Garberson, F.; Garcia, J. E.; Garfinkel, A. F.; Genser, K.; Gerberich, H.; Gerdes, D.; Gessler, A.; Giagu, S.; Giakoumopoulou, V.; Giannetti, P.; Gibson, K.; Gimmell, J. L.; Ginsburg, C. M.; Giokaris, N.; Giordani, M.; Giromini, P.; Giunta, M.; Giurgiu, G.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldschmidt, N.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Gresele, A.; Grinstein, S.; Grosso-Pilcher, C.; Group, R. C.; Grundler, U.; da Costa, J. Guimaraes; Gunay-Unalan, Z.; Haber, C.; Hahn, K.; Hahn, S. R.; Halkiadakis, E.; Han, B.-Y.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, D.; Hare, M.; Harper, S.; Harr, R. F.; Harris, R. M.; Hartz, M.; Hatakeyama, K.; Hays, C.; Heck, M.; Heijboer, A.; Heinrich, J.; Henderson, C.; Herndon, M.; Heuser, J.; Hewamanage, S.; Hidas, D.; Hill, C. S.; Hirschbuehl, D.; Hocker, A.; Hou, S.; Houlden, M.; Hsu, S.-C.; Huffman, B. T.; Hughes, R. E.; Husemann, U.; Hussein, M.; Huston, J.; Incandela, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jha, M. K.; Jindariani, S.; Johnson, W.; Jones, M.; Joo, K. K.; Jun, S. Y.; Jung, J. E.; Junk, T. R.; Kamon, T.; Kar, D.; Karchin, P. E.; Kato, Y.; Kephart, R.; Keung, J.; Khotilovich, V.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, H. W.; Kim, J. E.; Kim, M. J.; Kim, S. B.; Kim, S. H.; Kim, Y. K.; Kimura, N.; Kirsch, L.; Klimenko, S.; Knuteson, B.; Ko, B. R.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Korytov, A.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Krop, D.; Krumnack, N.; Kruse, M.; Krutelyov, V.; Kubo, T.; Kuhr, T.; Kulkarni, N. P.; Kurata, M.; Kwang, S.; Laasanen, A. T.; Lami, S.; Lammel, S.; Lancaster, M.; Lander, R. L.; Lannon, K.; Lath, A.; Latino, G.; Lazzizzera, I.; Lecompte, T.; Lee, E.; Lee, H. S.; Lee, S. W.; Leone, S.; Lewis, J. D.; Lin, C.-S.; Linacre, J.; Lindgren, M.; Lipeles, E.; Lister, A.; Litvintsev, D. O.; Liu, C.; Liu, T.; Lockyer, N. S.; Loginov, A.; Loreti, M.; Lovas, L.; Lucchesi, D.; Luci, C.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lyons, L.; Lys, J.; Lysak, R.; MacQueen, D.; Madrak, R.; Maeshima, K.; Makhoul, K.; Maki, T.; Maksimovic, P.; Malde, S.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Margaroli, F.; Marino, C.; Marino, C. P.; Martin, A.; Martin, V.; Martínez, M.; Martínez-Ballarín, R.; Maruyama, T.; Mastrandrea, P.; Masubuchi, T.; Mathis, M.; Mattson, M. E.; Mazzanti, P.; McFarland, K. S.; McIntyre, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Menzione, A.; Merkel, P.; Mesropian, C.; Miao, T.; Miladinovic, N.; Miller, R.; Mills, C.; Milnik, M.; Mitra, A.; Mitselmakher, G.; Miyake, H.; Moggi, N.; Moon, C. S.; Moore, R.; Morello, M. J.; Morlock, J.; Fernandez, P. Movilla; Mülmenstädt, J.; Mukherjee, A.; Muller, Th.; Mumford, R.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Nagano, A.; Naganoma, J.; Nakamura, K.; Nakano, I.; Napier, A.; Necula, V.; Nett, J.; Neu, C.; Neubauer, M. S.; Neubauer, S.; Nielsen, J.; Nodulman, L.; Norman, M.; Norniella, O.; Nurse, E.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Osterberg, K.; Griso, S. Pagan; Palencia, E.; Papadimitriou, V.; Papaikonomou, A.; Paramonov, A. A.; Parks, B.; Pashapour, S.; Patrick, J.; Pauletta, G.; Paulini, M.; Paus, C.; Peiffer, T.; Pellett, D. E.; Penzo, A.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pinera, L.; Pitts, K.; Plager, C.; Pondrom, L.; Poukhov, O.; Pounder, N.; Prakoshyn, F.; Pronko, A.; Proudfoot, J.; Ptohos, F.; Pueschel, E.; Punzi, G.; Pursley, J.; Rademacker, J.; Rahaman, A.; Ramakrishnan, V.; Ranjan, N.; Redondo, I.; Renton, P.; Renz, M.; Rescigno, M.; Richter, S.; Rimondi, F.; Ristori, L.; Robson, A.; Rodrigo, T.; Rodriguez, T.; Rogers, E.; Rolli, S.; Roser, R.; Rossi, M.; Rossin, R.; Roy, P.; Ruiz, A.; Russ, J.; Rusu, V.; Rutherford, B.; Saarikko, H.; Safonov, A.; Sakumoto, W. K.; Saltó, O.; Santi, L.; Sarkar, S.; Sartori, L.; Sato, K.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, A.; Schmidt, E. E.; Schmidt, M. A.; Schmidt, M. P.; Schmitt, M.; Schwarz, T.; Scodellaro, L.; Scribano, A.; Scuri, F.; Sedov, A.; Seidel, S.; Seiya, Y.; Semenov, A.; Sexton-Kennedy, L.; Sforza, F.; Sfyrla, A.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shiraishi, S.; Shochet, M.; Shon, Y.; Shreyber, I.; Sidoti, A.; Sinervo, P.; Sisakyan, A.; Slaughter, A. J.; Slaunwhite, J.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Snihur, R.; Soha, A.; Somalwar, S.; Sorin, V.; Spalding, J.; Spreitzer, T.; Squillacioti, P.; Stanitzki, M.; St. Denis, R.; Stelzer, B.; Stelzer-Chilton, O.; Stentz, D.; Strologas, J.; Strycker, G. L.; Stuart, D.; Suh, J. S.; Sukhanov, A.; Suslov, I.; Suzuki, T.; Taffard, A.; Takashima, R.; Takeuchi, Y.; Tanaka, R.; Tecchio, M.; Teng, P. K.; Terashi, K.; Thom, J.; Thompson, A. S.; Thompson, G. A.; Thomson, E.; Tipton, P.; Ttito-Guzmán, P.; Tkaczyk, S.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Tourneur, S.; Trovato, M.; Tsai, S.-Y.; Tu, Y.; Turini, N.; Ukegawa, F.; Vallecorsa, S.; van Remortel, N.; Varganov, A.; Vataga, E.; Vázquez, F.; Velev, G.; Vellidis, C.; Vidal, M.; Vidal, R.; Vila, I.; Vilar, R.; Vine, T.; Vogel, M.; Volobouev, I.; Volpi, G.; Wagner, P.; Wagner, R. G.; Wagner, R. L.; Wagner, W.; Wagner-Kuhr, J.; Wakisaka, T.; Wallny, R.; Wang, S. M.; Warburton, A.; Waters, D.; Weinberger, M.; Weinelt, J.; Wester, W. C., III; Whitehouse, B.; Whiteson, D.; Wicklund, A. B.; Wicklund, E.; Wilbur, S.; Williams, G.; Williams, H. H.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, C.; Wright, T.; Wu, X.; Würthwein, F.; Xie, S.; Yagil, A.; Yamamoto, K.; Yamaoka, J.; Yang, U. K.; Yang, Y. C.; Yao, W. M.; Yeh, G. P.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Yu, S. S.; Yun, J. C.; Zanello, L.; Zanetti, A.; Zhang, X.; Zheng, Y.; Zucchelli, S.

    2009-04-01

    We present a measurement of the top quark mass with t tmacr dilepton events produced in p pmacr collisions at the Fermilab Tevatron (s=1.96TeV) and collected by the CDF II detector. A sample of 328 events with a charged electron or muon and an isolated track, corresponding to an integrated luminosity of 2.9fb-1, are selected as t tmacr candidates. To account for the unconstrained event kinematics, we scan over the phase space of the azimuthal angles (ϕν1,ϕν2) of neutrinos and reconstruct the top quark mass for each ϕν1, ϕν2 pair by minimizing a χ2 function in the t tmacr dilepton hypothesis. We assign χ2-dependent weights to the solutions in order to build a preferred mass for each event. Preferred mass distributions (templates) are built from simulated t tmacr and background events, and parametrized in order to provide continuous probability density functions. A likelihood fit to the mass distribution in data as a weighted sum of signal and background probability density functions gives a top quark mass of 165.5-3.3+3.4(stat)±3.1(syst)GeV/c2.

  19. Selecting Finite Unified Theories with Current Data

    SciTech Connect

    Heinemeyer, S.; Mondragon, M.; Zoupanos, G.

    2008-11-23

    Finite Unified Theories (FUTs) are N = 1 supersymmetric Grand Unified Theories that can be made all-loop finite, leading to a severe reduction of the free parameters. We review the investigation of FUTs based on SU(5) in the context of low-energy phenomenology observables. Using the restrictions from the top and bottom quark masses, it is possible to discriminate between different models. Including further low-energy constraints such as B physics observables, the bound on the lightest Higgs boson mass and the cold dark matter density, we derive the predictions for the supersymmetric particle spectrum and the prospects for discoveries at the LHC.

  20. Top quark physics: Future measurements

    SciTech Connect

    Frey, R.; Vejcik, S.; Berger, E.L.

    1997-04-04

    The authors discuss the study of the top quark at future experiments and machines. Top`s large mass makes it a unique probe of physics at the natural electroweak scale. They emphasize measurements of the top quark`s mass, width, and couplings, as well as searches for rare or nonstandard decays, and discuss the complementary roles played by hadron and lepton colliders.

  1. Measurement of the top-quark mass in the t t xAF dilepton channel using the full CDF Run II data set

    NASA Astrophysics Data System (ADS)

    Aaltonen, T.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J. A.; Arisawa, T.; Artikov, A.; Asaadi, J.; Ashmanskas, W.; Auerbach, B.; Aurisano, A.; Azfar, F.; Badgett, W.; Bae, T.; Barbaro-Galtieri, A.; Barnes, V. E.; Barnett, B. A.; Barria, P.; Bartos, P.; Bauce, M.; Bedeschi, F.; Behari, S.; Bellettini, G.; Bellinger, J.; Benjamin, D.; Beretvas, A.; Bhatti, A.; Bland, K. R.; Blumenfeld, B.; Bocci, A.; Bodek, A.; Bortoletto, D.; Boudreau, J.; Boveia, A.; Brigliadori, L.; Bromberg, C.; Brucken, E.; Budagov, J.; Budd, H. S.; Burkett, K.; Busetto, G.; Bussey, P.; Butti, P.; Buzatu, A.; Calamba, A.; Camarda, S.; Campanelli, M.; Canelli, F.; Carls, B.; Carlsmith, D.; Carosi, R.; Carrillo, S.; Casal, B.; Casarsa, M.; Castro, A.; Catastini, P.; Cauz, D.; Cavaliere, V.; Cerri, A.; Cerrito, L.; Chen, Y. C.; Chertok, M.; Chiarelli, G.; Chlachidze, G.; Cho, K.; Chokheli, D.; Clark, A.; Clarke, C.; Convery, M. E.; Conway, J.; Corbo, M.; Cordelli, M.; Cox, C. A.; Cox, D. J.; Cremonesi, M.; Cruz, D.; Cuevas, J.; Culbertson, R.; d'Ascenzo, N.; Datta, M.; de Barbaro, P.; Demortier, L.; Deninno, M.; D'Errico, M.; Devoto, F.; Di Canto, A.; Di Ruzza, B.; Dittmann, J. R.; Donati, S.; D'Onofrio, M.; Dorigo, M.; Driutti, A.; Ebina, K.; Edgar, R.; Elagin, A.; Erbacher, R.; Errede, S.; Esham, B.; Farrington, S.; Fernández Ramos, J. P.; Field, R.; Flanagan, G.; Forrest, R.; Franklin, M.; Freeman, J. C.; Frisch, H.; Funakoshi, Y.; Galloni, C.; Garfinkel, A. F.; Garosi, P.; Gerberich, H.; Gerchtein, E.; Giagu, S.; Giakoumopoulou, V.; Gibson, K.; Ginsburg, C. M.; Giokaris, N.; Giromini, P.; Glagolev, V.; Glenzinski, D.; Gold, M.; Goldin, D.; Golossanov, A.; Gomez, G.; Gomez-Ceballos, G.; Goncharov, M.; González López, O.; Gorelov, I.; Goshaw, A. T.; Goulianos, K.; Gramellini, E.; Grosso-Pilcher, C.; Group, R. C.; Guimaraes da Costa, J.; Hahn, S. R.; Han, J. Y.; Happacher, F.; Hara, K.; Hare, M.; Harr, R. F.; Harrington-Taber, T.; Hatakeyama, K.; Hays, C.; Heinrich, J.; Herndon, M.; Hocker, A.; Hong, Z.; Hopkins, W.; Hou, S.; Hughes, R. E.; Husemann, U.; Hussein, M.; Huston, J.; Introzzi, G.; Iori, M.; Ivanov, A.; James, E.; Jang, D.; Jayatilaka, B.; Jeon, E. J.; Jindariani, S.; Jones, M.; Joo, K. K.; Jun, S. Y.; Junk, T. R.; Kambeitz, M.; Kamon, T.; Karchin, P. E.; Kasmi, A.; Kato, Y.; Ketchum, W.; Keung, J.; Kilminster, B.; Kim, D. H.; Kim, H. S.; Kim, J. E.; Kim, M. J.; Kim, S. H.; Kim, S. B.; Kim, Y. J.; Kim, Y. K.; Kimura, N.; Kirby, M.; Knoepfel, K.; Kondo, K.; Kong, D. J.; Konigsberg, J.; Kotwal, A. V.; Kreps, M.; Kroll, J.; Kruse, M.; Kuhr, T.; Kurata, M.; Laasanen, A. T.; Lammel, S.; Lancaster, M.; Lannon, K.; Latino, G.; Lee, H. S.; Lee, J. S.; Leo, S.; Leone, S.; Lewis, J. D.; Limosani, A.; Lipeles, E.; Lister, A.; Liu, H.; Liu, Q.; Liu, T.; Lockwitz, S.; Loginov, A.; Lucchesi, D.; Lucà, A.; Lueck, J.; Lujan, P.; Lukens, P.; Lungu, G.; Lys, J.; Lysak, R.; Madrak, R.; Maestro, P.; Malik, S.; Manca, G.; Manousakis-Katsikakis, A.; Marchese, L.; Margaroli, F.; Marino, P.; Matera, K.; Mattson, M. E.; Mazzacane, A.; Mazzanti, P.; McNulty, R.; Mehta, A.; Mehtala, P.; Mesropian, C.; Miao, T.; Mietlicki, D.; Mitra, A.; Miyake, H.; Moed, S.; Moggi, N.; Moon, C. S.; Moore, R.; Morello, M. J.; Mukherjee, A.; Muller, Th.; Murat, P.; Mussini, M.; Nachtman, J.; Nagai, Y.; Naganoma, J.; Nakano, I.; Napier, A.; Nett, J.; Neu, C.; Nigmanov, T.; Nodulman, L.; Noh, S. Y.; Norniella, O.; Oakes, L.; Oh, S. H.; Oh, Y. D.; Oksuzian, I.; Okusawa, T.; Orava, R.; Ortolan, L.; Pagliarone, C.; Palencia, E.; Palni, P.; Papadimitriou, V.; Parker, W.; Pauletta, G.; Paulini, M.; Paus, C.; Phillips, T. J.; Piacentino, G.; Pianori, E.; Pilot, J.; Pitts, K.; Plager, C.; Pondrom, L.; Poprocki, S.; Potamianos, K.; Pranko, A.; Prokoshin, F.; Ptohos, F.; Punzi, G.; Redondo Fernández, I.; Renton, P.; Rescigno, M.; Rimondi, F.; Ristori, L.; Robson, A.; Rodriguez, T.; Rolli, S.; Ronzani, M.; Roser, R.; Rosner, J. L.; Ruffini, F.; Ruiz, A.; Russ, J.; Rusu, V.; Sakumoto, W. K.; Sakurai, Y.; Santi, L.; Sato, K.; Saveliev, V.; Savoy-Navarro, A.; Schlabach, P.; Schmidt, E. E.; Schwarz, T.; Scodellaro, L.; Scuri, F.; Seidel, S.; Seiya, Y.; Semenov, A.; Sforza, F.; Shalhout, S. Z.; Shears, T.; Shepard, P. F.; Shimojima, M.; Shochet, M.; Shreyber-Tecker, I.; Simonenko, A.; Sliwa, K.; Smith, J. R.; Snider, F. D.; Song, H.; Sorin, V.; St. Denis, R.; Stancari, M.; Stentz, D.; Strologas, J.; Sudo, Y.; Sukhanov, A.; Suslov, I.; Takemasa, K.; Takeuchi, Y.; Tang, J.; Tecchio, M.; Teng, P. K.; Thom, J.; Thomson, E.; Thukral, V.; Toback, D.; Tokar, S.; Tollefson, K.; Tomura, T.; Tonelli, D.; Torre, S.; Torretta, D.; Totaro, P.; Trovato, M.; Ukegawa, F.; Uozumi, S.; Vázquez, F.; Velev, G.; Vellidis, C.; Vernieri, C.; Vidal, M.; Vilar, R.; Vizán, J.; Vogel, M.; Volpi, G.; Wagner, P.; Wallny, R.; Wang, S. M.; Waters, D.; Wester, W. C.; Whiteson, D.; Wicklund, A. B.; Wilbur, S.; Williams, H. H.; Wilson, J. S.; Wilson, P.; Winer, B. L.; Wittich, P.; Wolbers, S.; Wolfe, H.; Wright, T.; Wu, X.; Wu, Z.; Yamamoto, K.; Yamato, D.; Yang, T.; Yang, U. K.; Yang, Y. C.; Yao, W.-M.; Yeh, G. P.; Yi, K.; Yoh, J.; Yorita, K.; Yoshida, T.; Yu, G. B.; Yu, I.; Zanetti, A. M.; Zeng, Y.; Zhou, C.; Zucchelli, S.; CDF Collaboration

    2015-08-01

    We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run II at center-of-mass energy √{s }=1.96 TeV , corresponding to an integrated luminosity of 9.1 fb-1 . A special observable is exploited for an optimal reduction of the dominant systematic uncertainty, associated with the knowledge of the absolute energy of the hadronic jets. The distribution of this observable in the selected events is compared to simulated distributions of t t ¯ dilepton signal and background. We measure a value for the top-quark mass of 171.5 ±1.9 (stat)±2.5 (syst) GeV /c2 .

  2. A two-dimensional coupled flow-mass transport model based on an improved unstructured finite volume algorithm.

    PubMed

    Zhou, Jianzhong; Song, Lixiang; Kursan, Suncana; Liu, Yi

    2015-05-01

    A two-dimensional coupled water quality model is developed for modeling the flow-mass transport in shallow water. To simulate shallow flows on complex topography with wetting and drying, an unstructured grid, well-balanced, finite volume algorithm is proposed for numerical resolution of a modified formulation of two-dimensional shallow water equations. The slope-limited linear reconstruction method is used to achieve second-order accuracy in space. The algorithm adopts a HLLC-based integrated solver to compute the flow and mass transport fluxes simultaneously, and uses Hancock's predictor-corrector scheme for efficient time stepping as well as second-order temporal accuracy. The continuity and momentum equations are updated in both wet and dry cells. A new hybrid method, which can preserve the well-balanced property of the algorithm for simulations involving flooding and recession, is proposed for bed slope terms approximation. The effectiveness and robustness of the proposed algorithm are validated by the reasonable good agreement between numerical and reference results of several benchmark test cases. Results show that the proposed coupled flow-mass transport model can simulate complex flows and mass transport in shallow water. PMID:25686488

  3. Measurement of the Top Quark Mass using Dilepton Events and a Neutrino Weighting Algorithm with the D0 Experiment at the Tevatron (Run II)

    SciTech Connect

    Meyer, Joerg; /Bonn U.

    2007-01-01

    Elementary particle physics raises questions that are several thousand years old. What are the fundamental components of matter and how do they interact? These questions are linked to the question of what happened in the very first moments after the creation of the universe. Modern physics systematically tests nature to find answers to these and other fundamental questions. Precise theories are developed that describe various phenomena and at the same time are reduced to a few basic principals of nature. Simplification and reduction have always been guiding concepts of physics. The interplay between experimental data and theoretical descriptions led to the Standard Model of elementary particle physics. It summarizes the laws of nature and is one of most precise descriptions of nature achieved by mankind. Despite the great success of the Standard Model it is not the ultimate theory of everything. Models beyond the Standard Model try to unify all interactions in one grand unified theory. The number of free parameters is attempted to be reduced. Gravity is attempted to be incorporated. Extensions to the Standard Model like supersymmetry address the so-called hierarchy problem. Precision measurements are the key for searches of new particles and new physics. A powerful tool of experimental particle physics are particle accelerators. They provide tests of the Standard Model at smallest scales. New particles are produced and their properties are investigated. In 1995 the heaviest known elementary particle, called top quark, has been discovered at Fermilab. It differs from all other lighter quarks due to the high mass and very short lifetime. This makes the top quark special and an interesting object to be studied. A rich program of top physics at Fermilab investigates whether the top quark is really the particle as described by the Standard Model. The top quark mass is a free parameter of the theory that has been measured precisely. This thesis presents a precise

  4. Algorithm for quantum-mechanical finite-nuclear-mass variational calculations of atoms with two p electrons using all-electron explicitly correlated Gaussian basis functions

    SciTech Connect

    Sharkey, Keeper L.; Pavanello, Michele; Bubin, Sergiy; Adamowicz, Ludwik

    2009-12-15

    A new algorithm for calculating the Hamiltonian matrix elements with all-electron explicitly correlated Gaussian functions for quantum-mechanical calculations of atoms with two p electrons or a single d electron have been derived and implemented. The Hamiltonian used in the approach was obtained by rigorously separating the center-of-mass motion and it explicitly depends on the finite mass of the nucleus. The approach was employed to perform test calculations on the isotopes of the carbon atom in their ground electronic states and to determine the finite-nuclear-mass corrections for these states.

  5. Top quark physics

    SciTech Connect

    Ahmadov, A.; Azuelos, G.; Bauer, U.; Belyaev, A.; Berger, E. L.; Sullivan, Z.; Tait, T. M. P.

    2000-03-24

    The top quark, when it was finally discovered at Fermilab in 1995 completed the three-generation structure of the Standard Model (SM) and opened up the new field of top quark physics. Viewed as just another SM quark, the top quark appears to be a rather uninteresting species. Produced predominantly, in hadron-hadron collisions, through strong interactions, it decays rapidly without forming hadrons, and almost exclusively through the single mode t {r_arrow} Wb. The relevant CKM coupling V{sub tb} is already determined by the (three-generation) unitarity of the CKM matrix. Rare decays and CP violation are unmeasurable small in the SM. Yet the top quark is distinguished by its large mass, about 35 times larger than the mass of the next heavy quark, and intriguingly close to the scale of electroweak (EW) symmetry breaking. This unique property raises a number of interesting questions. Is the top quark mass generated by the Higgs mechanism as the SM predicts and is its mass related to the top-Higgs-Yukawa coupling? Or does it play an even more fundamental role in the EW symmetry breaking mechanism? If there are new particles lighter than the top quark, does the top quark decay into them? Could non-SM physics first manifest itself in non-standard couplings of the top quark which show up as anomalies in top quark production and decays? Top quark physics tries to answer these questions. Several properties of the top quark have already been examined at the Tevatron. These include studies of the kinematical properties of top production, the measurements of the top mass, of the top production cross-section, the reconstruction of t{bar t}pairs in the fully hadronic final states, the study of {tau} decays of the top quark, the reconstruction of hadronic decays of the W boson from top decays, the search for flavor changing neutral current decays, the measurement of the W helicity in top decays, and bounds on t{bar t} spin correlations. Most of these measurements are limited by

  6. Mass modification of /D-meson at finite density in QCD sum rule

    NASA Astrophysics Data System (ADS)

    Hayashigaki1, A.

    2000-08-01

    We evaluate the mass shift of isospin-averaged /D-meson in the nuclear medium. Borel-transformed QCD sum rules are used to describe an interaction between the /D-meson and a nucleon by taking into account all the lowest dimension-4 operators in the operator product expansion (OPE). We find at normal matter density the /D-meson mass shift is about /10 times (/~50 MeV) larger than that of /J/ψ. This originates from the fact that the dominant contribution in the OPE for the /D-meson is the nucleon matrix element of mcq¯q, where mc is the charm-quark mass and /q denotes light quarks. We also discuss that the mass shift of the /D-meson in nuclear matter may cause the level crossings of the charmonium states and the /DD¯ threshold. This suggests an additional mechanism of the /J/ψ suppression in high energy heavy-ion collisions.

  7. Top quark mass measurement in the dilepton channel during the D0 experiment at the Tevatron. Mesure de la masse du quark top dans les canaux di-leptoniques auprès de l’expérience DØ au Tevatron

    SciTech Connect

    Croc, Aurelien

    2011-01-01

    The top quark is the heaviest standard model quark. Discovered in 1995 by the two Tevatron experiments it has atypical properties. In particular its time life is so short that it decays before hadronizing, so the top quark mass could be measured with a high precision. Data collected by the DØ experiment between 2002 and 2009, which represent an integrated luminosity of 5.4 fb⁻¹, are used to measure the top quark mass by using the matrix element method in the three dilepton channels: dielectron, electron--muon and dimuon. The measured mass, 174.0 ± 1.8 (stat.) ± 2.4 (syst.) GeV, is in a good agreement with other measurements and limited by the systematic uncertainties for the first time in these channels. In this thesis different approaches have been studied to improve the accuracy of this measurement: the use of b-quark jet identification in order to optimize the selection of top--anti-top events and a better determination of the main systematic uncertainties. A special attention has been paid to the Monte-Carlo simulation of muons in DØ: the improved smearing procedure for the simulated muons, discussed in this thesis, will be used to increase the accuracy of the top properties measurements as well as the precision of many other DØ measurements.

  8. User's Manual for the FEHM Application-A Finite-Element Heat- and Mass-Transfer Code

    SciTech Connect

    George A. Zyvoloski; Bruce A. Robinson; Zora V. Dash; Lynn L. Trease

    1997-07-07

    This document is a manual for the use of the FEHM application, a finite-element heat- and mass-transfer computer code that can simulate nonisothermal multiphase multicomponent flow in porous media. The use of this code is applicable to natural-state studies of geothermal systems and groundwater flow. A primary use of the FEHM application will be to assist in the understanding of flow fields and mass transport in the saturated and unsaturated zones below the proposed Yucca Mountain nuclear waste repository in Nevada. The equations of heat and mass transfer for multiphase flow in porous and permeable media are solved in the FEHM application by using the finite-element method. The permeability and porosity of the medium are allowed to depend on pressure and temperature. The code also has provisions for movable air and water phases and noncoupled tracers; that is, tracer solutions that do not affect the heat- and mass-transfer solutions. The tracers can be passive or reactive. The code can simulate two-dimensional, two-dimensional radial, or three-dimensional geometries. In fact, FEHM is capable of describing flow that is dominated in many areas by fracture and fault flow, including the inherently three-dimensional flow that results from permeation to and from faults and fractures. The code can handle coupled heat and mass-transfer effects, such as boiling, dryout, and condensation that can occur in the near-field region surrounding the potential repository and the natural convection that occurs through Yucca Mountain due to seasonal temperature changes. The code is also capable of incorporating the various adsorption mechanisms, ranging from simple linear relations to nonlinear isotherms, needed to describe the very complex transport processes at Yucca Mountain. This report outlines the uses and capabilities of the FEHM application, initialization of code variables, restart procedures, and error processing. The report describes all the data files, the input data

  9. Measurement of the Top Quark Mass in p anti-p Collisions at s**(1/2) = 1.96-TeV using the Decay Length Technique

    SciTech Connect

    Abulencia, A.; Adelman, J.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; Annovi, A.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara /Cantabria Inst. of Phys.

    2006-12-01

    We report the first measurement of the top quark mass using the decay length technique in p{bar p} collisions at a center-of-mass energy of 1.96 TeV. This technique uses the measured flight distance of the b hadron to infer the mass of the top quark in lepton plus jets events with missing transverse energy. It relies solely on tracking and avoids the jet energy scale uncertainty that is common to all other methods used so far. We apply our novel method to a 695 pb{sup -1} data sample recorded by the CDF II detector at Fermilab and extract a measurement of m{sub t} = 180.7{sub -13.4}{sup +15.5}(stat.) {+-} 8.6 (syst.) GeV/c{sup 2}. While the uncertainty of this result is larger than that of other measurements, the dominant uncertainties in the decay length technique are uncorrelated with those in other methods. This result can help reduce the overall uncertainty when combined with other existing measurements of the top quark mass.

  10. Nuclear mass formula with a finite-range droplet model and a folded-Yukawa single-particle potential

    SciTech Connect

    Moeller, P.; Myers, W.D.; Swiatecki, W.J.; Treiner, J.

    1988-07-01

    We calculate ground-state masses for 4678 nuclei ranging from /sup 16/O to /sup 318/122 by use of a macroscopic-microscopic model, which incorporates several new features. For the macroscopic model we use the finite-range droplet model which we introduced in 1984. The microscopic contribution is taken from a calculation based on a folded-Yukawa single-particle potential. Some new features now incorporated are a new model for the average pairing strength and the solution of the microscopic pairing equations by use of the Lipkin-Nogami method with approximate particle number conservation. To estimate the parameters of the macroscopic model we use an approach that starts by defining the error of a mass formula in a rigorous way, which leads naturally to the use of experimental uncertainties and of the maximum-likelihood method to derive a set of equations for estimating the parameters and error of the theoretical model. By considering 1593 experimental masses from /sup 16/O to /sup 263/106 we estimate the error of the theoretical model to be 0.769 MeV. The model retains its accuracy far from stability and the values of the model parameters are very insensitive to details of the adjustment procedure. copyright 1988 Academic Press, Inc.

  11. Oscillator strengths and radiative decay rates for spin-changing S-P transitions in helium: finite nuclear mass effects

    NASA Astrophysics Data System (ADS)

    Morton, Donald C.; Schulhoff, Eva E.; Drake, G. W. F.

    2015-12-01

    We have calculated the electric dipole (E1) and magnetic quadrupole (M2) oscillator strengths and spontaneous decay rates for 24 spin-changing transitions of atomic helium. We included the effects of the finite nuclear mass and the anomalous magnetic moment of the electron augmented by the recently derived Pachucki term. The specific transitions for 4He are n{ }1{{{S}}}0-{n}\\prime { }3{{{P}}}{1,2} and n{ }3{{{S}}}1-{n}\\prime { }1{{{P}}}1 with n,{n}\\prime ≤slant 3 and n≤slant 10 for {n}\\prime =n. For the E1 calculations we used the Breit approximation and pseudostate expansions to perform the perturbation sums over intermediate states in both the length and velocity gauge as a check on both numerical accuracy and validity of the transition operators. The corrections for the nuclear mass and the electron anomaly tend to cancel, indicating that if one is included, then so should be the other. The tables give mass- and anomaly-dependent coefficients permitting the easy generation of results for the other isotopes of helium.

  12. Formulation and constraints on decaying dark matter with finite mass daughter particles

    SciTech Connect

    Aoyama, Shohei; Ichiki, Kiyotomo; Nitta, Daisuke; Sugiyama, Naoshi E-mail: ichiki@a.phys.nagoya-u.ac.jp E-mail: naoshi@a.phys.nagoya-u.ac.jp

    2011-09-01

    Decaying dark matter cosmological models have been proposed to remedy the overproduction problem at small scales in the standard cold dark matter paradigm. We consider a decaying dark matter model in which one CDM mother particle decays into two daughter particles, with arbitrary masses. A complete set of Boltzmann equations of dark matter particles is derived which is necessary to calculate the evolutions of their energy densities and their density perturbations. By comparing the expansion history of the universe in this model and the free-streaming scale of daughter particles with astronomical observational data, we give constraints on the lifetime of the mother particle, Γ{sup −1}, and the mass ratio between the daughter and the mother particles m{sub D}/m{sub M}. From the distance to the last scattering surface of the cosmic microwave background, we obtain Γ{sup −1} > 30 Gyr in the massless limit of daughter particles and, on the other hand, we obtain m{sub D} > 0.97m{sub M} in the limit Γ{sup −1} → 0. The free-streaming constraint tightens the bound on the mass ratio as (Γ{sup −1}/10{sup −2}Gyr)∼<((1−m{sub D1}/m{sub M})/10{sup −2}){sup −3/2} for Γ{sup −1} < H{sup −1}(z = 3)

  13. An Objective Evaluation of Mass Scaling Techniques Utilizing Computational Human Body Finite Element Models.

    PubMed

    Davis, Matthew L; Scott Gayzik, F

    2016-10-01

    Biofidelity response corridors developed from post-mortem human subjects are commonly used in the design and validation of anthropomorphic test devices and computational human body models (HBMs). Typically, corridors are derived from a diverse pool of biomechanical data and later normalized to a target body habitus. The objective of this study was to use morphed computational HBMs to compare the ability of various scaling techniques to scale response data from a reference to a target anthropometry. HBMs are ideally suited for this type of study since they uphold the assumptions of equal density and modulus that are implicit in scaling method development. In total, six scaling procedures were evaluated, four from the literature (equal-stress equal-velocity, ESEV, and three variations of impulse momentum) and two which are introduced in the paper (ESEV using a ratio of effective masses, ESEV-EffMass, and a kinetic energy approach). In total, 24 simulations were performed, representing both pendulum and full body impacts for three representative HBMs. These simulations were quantitatively compared using the International Organization for Standardization (ISO) ISO-TS18571 standard. Based on these results, ESEV-EffMass achieved the highest overall similarity score (indicating that it is most proficient at scaling a reference response to a target). Additionally, ESEV was found to perform poorly for two degree-of-freedom (DOF) systems. However, the results also indicated that no single technique was clearly the most appropriate for all scenarios. PMID:27457051

  14. Finite element simulations of low-mass readout cables for the CBM Silicon Tracking System using RAPHAEL

    NASA Astrophysics Data System (ADS)

    Singla, M.; Chatterji, S.; Müller, W. F. J.; Kleipa, V.; Heuser, J. M.

    2014-01-01

    The first three-dimensional simulation study of thin multi-line readout cables using finite element simulation tool RAPHAEL is being reported. The application is the Silicon Tracking System (STS) of the fixed-target heavy-ion experiment Compressed Baryonic Matter (CBM), under design at the forthcoming accelerator center FAIR in Germany. RAPHAEL has been used to design low-mass analog readout cables with minimum possible Equivalent Noise Charge (ENC). Various trace geometries and trace materials have been explored in detail for this optimization study. These cables will bridge the distance between the microstrip detectors and the signal processing electronics placed at the periphery of the silicon tracking stations. SPICE modeling has been implemented in Sentaurus Device to study the transmission loss (dB loss) in cables and simulation has been validated with measurements. An optimized design having minimum possible ENC, material budget and transmission loss for the readout cables has been proposed.

  15. Correlation Results for a Mass Loaded Vehicle Panel Test Article Finite Element Models and Modal Survey Tests

    NASA Technical Reports Server (NTRS)

    Maasha, Rumaasha; Towner, Robert L.

    2012-01-01

    High-fidelity Finite Element Models (FEMs) were developed to support a recent test program at Marshall Space Flight Center (MSFC). The FEMs correspond to test articles used for a series of acoustic tests. Modal survey tests were used to validate the FEMs for five acoustic tests (a bare panel and four different mass-loaded panel configurations). An additional modal survey test was performed on the empty test fixture (orthogrid panel mounting fixture, between the reverb and anechoic chambers). Modal survey tests were used to test-validate the dynamic characteristics of FEMs used for acoustic test excitation. Modal survey testing and subsequent model correlation has validated the natural frequencies and mode shapes of the FEMs. The modal survey test results provide a basis for the analysis models used for acoustic loading response test and analysis comparisons

  16. The One-Body and Two-Body Density Matrices of Finite Nuclei and Center-of-Mass Correlations

    SciTech Connect

    Shebeko, A.; Papakonstantinou, P.; Mavrommatis, E.

    2006-04-26

    A method is presented for the calculation of the one-body (1DM) and two-body (2DM) density matrices and their Fourier transforms in momentum space, that is consistent with the requirement for translational invariance (TI), in the case of a nucleus (a finite self-bound system). We restore TI by using the so-called fixed center-of-mass (CM) approximation for constructing an intrinsic nuclear ground state wavefunction (WF) by starting from a non-translationally invariant (nTI) WF and applying a projection prescription. We discuss results for the one-body (OBMD) and two-body (TBMD) momentum distributions of the 4He nucleus calculated with the Slater determinant of the harmonic oscillator (HO) orbitals, as the initial nTI WF. Effects of such an inclusion of CM correlations are found to be quite important in the momentum distributions.

  17. A study of the ultrahigh-energy cosmic ray mass composition with the MACRO and EAS-TOP experiments

    NASA Astrophysics Data System (ADS)

    Coutu, Stephane

    Two components of cosmic-ray-induced air showers are measured simultaneously at the Gran Sasso Laboratory: the electromagnetic shower at the ground surface by the EAS-TOP extensive air shower array, and the deep-underground muons by the MACRO experiment. The two independent data sets collected during 96.3 days of simultaneous running are combined, and underground muon multiplicity distributions are obtained for anticoincident events (no surface trigger) and high-energy, coincident events. These categories correspond to ranges in primary energy from about 2 x 103 GeV to a few times 105 GeV, and from about 1.5 x 105 GeV to about 107 GeV, respectively. The experimental shower size and muon multiplicity distributions, as well as the distribution of mean muon multiplicity as a function of shower size (N-barmu -- log(Ne) relation), are compared to the ones obtained with detailed Monte Carlo calculations (with a generator based on recent hadronic accelerator data) using various trial compositions as input. This is done in an effort to discriminate between these models of primary cosmic-ray mass composition at and above the 'kneel' in the all-particle spectrum, where contradictory experimental evidence exists and where a knowledge of the composition would bear upon possible mechanisms for cosmic-ray acceleration and propagation. Detailed studies of simulated anticoincident event rates (which arise from a region of primary energy where the composition has been measured directly by satellite and balloon experiments) uncover problems with the generator used, with between 25 and 40 percent too few high-energy muons created. This, combined with the dependence of absolute event rates on the assumed differential primary energy spectra, hampers the interpretation in terms of composition of underground muon or surface air shower data taken separately. However, the N-barmu -- log(Ne) relation is independent of the spectra or overall Monte Carlo normalization problems. The simulated

  18. A Measurement of the Top Quark Mass with the D0 Detector at s**(1/2) = 1.96-TeV using the Matrix Element Method

    SciTech Connect

    Kroeninger, Kevin Alexander; /Bonn U.

    2004-04-01

    Using a data set of 158 and 169 pb{sup -1} of D0 Run-II data in the electron and muon plus jets channel, respectively, the top quark mass has been measured using the Matrix Element Method. The method and its implementation are described. Its performance is studied in Monte Carlo using ensemble tests and the method is applied to the Moriond 2004 data set.

  19. User`s manual for the FEHM application -- A finite-element heat- and mass-transfer code

    SciTech Connect

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1997-07-01

    The use of this code is applicable to natural-state studies of geothermal systems and groundwater flow. A primary use of the FEHM application will be to assist in the understanding of flow fields and mass transport in the saturated and unsaturated zones below the proposed Yucca Mountain nuclear waste repository in Nevada. The equations of heat and mass transfer for multiphase flow in porous and permeable media are solved in the FEHM application by using the finite-element method. The permeability and porosity of the medium are allowed to depend on pressure and temperature. The code also has provisions for movable air and water phases and noncoupled tracers; that is, tracer solutions that do not affect the heat- and mass-transfer solutions. The tracers can be passive or reactive. The code can simulate two-dimensional, two-dimensional radial, or three-dimensional geometries. In fact, FEHM is capable of describing flow that is dominated in many areas by fracture and fault flow, including the inherently three-dimensional flow that results from permeation to and from faults and fractures. The code can handle coupled heat and mass-transfer effects, such as boiling, dryout, and condensation that can occur in the near-field region surrounding the potential repository and the natural convection that occurs through Yucca Mountain due to seasonal temperature changes. This report outlines the uses and capabilities of the FEHM application, initialization of code variables, restart procedures, and error processing. The report describes all the data files, the input data, including individual input records or parameters, and the various output files. The system interface is described, including the software environment and installation instructions.

  20. Measurement of the top-quark mass in all-hadronic decays in p anti-p collisions at CDF II

    SciTech Connect

    Aaltonen, T.; Abulencia, A.; Adelman, J.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Fermilab /Frascati

    2006-12-01

    We present a measurement of the top-quark mass, M{sub tpo}, in the all-hadronic decay channel t{bar t} {yields} W{sup +}bW{sup -}{bar b} {yields} q{sub 1}{bar q}{sub 2}bq{sub 3}{bar q}{sub 4}{bar b}. The analysis is performed using 310 pb{sup -1} of {radical}s = 1.96 TeV p{bar p} collisions collected with the CDF II detector using a multi-jet trigger. The mass measurement is based on an event-by-event likelihood which depends on both the sample purity and the value of the top-quark mass, using 90 possible jet-to-parton assignments in the six-jet final state. The joint likelihood of 290 selected events yields a value of M{sub top} = 177.1 {+-} 4.9(stat.) {+-} 4.7(syst.) GeV/c{sup 2}.

  1. Spherical Tippe Tops

    NASA Astrophysics Data System (ADS)

    Cross, Rod

    2013-03-01

    A tippe top (see Fig. 1) is usually constructed as a truncated sphere with a cylindrical peg on top, as indicated in Fig. 2(a). When spun rapidly on a horizontal surface, a tippe top spins about a vertical axis while rotating slowly about a horizontal axis until the peg touches the surface. At that point, weight is transferred to the peg, the truncated sphere rises off the surface, and the top spins on the peg until it is upright. A feature of a tippe top is that its center of mass, labeled G in Fig. 2, is below the geometric center of the sphere, C, when the top is at rest. That is where it will return if the top is tilted sideways and released since that is the stable equilibrium position. The fact that a tippe top turns upside down when it spins is therefore astonishing. The behavior of a tippe top is quite unlike that of a regular top since the spin axis remains closely vertical the whole time. The center of mass of a regular top can also rise, but the spin axis tilts upward as the top rises and enters a "sleeping" position.

  2. CDF Top Physics

    DOE R&D Accomplishments Database

    Tartarelli, G. F.; CDF Collaboration

    1996-05-01

    The authors present the latest results about top physics obtained by the CDF experiment at the Fermilab Tevatron collider. The data sample used for these analysis (about 110 pb{sup{minus}1}) represents almost the entire statistics collected by CDF during four years (1992--95) of data taking. This large data size has allowed detailed studies of top production and decay properties. The results discussed here include the determination of the top quark mass, the measurement of the production cross section, the study of the kinematics of the top events and a look at top decays.

  3. The Top Triangle Moose

    NASA Astrophysics Data System (ADS)

    Chivukula, R. S.; Christensen, N. D.; Coleppa, B.; Simmons, E. H.

    2011-01-01

    We introduce a deconstructed model that incorporates both Higgsless and top-color mechanisms. The model alleviates the typical tension in Higgsless models between obtaining the correct top quark mass and keeping Δρ small. It does so by singling out the top quark mass generation as arising from a Yukawa coupling to an effective top-Higgs which develops a small vacuum expectation value, while electroweak symmetry breaking results largely from a Higgsless mechanism. As a result, the heavy partners of the SM fermions can be light enough to be seen at the LHC.

  4. Software requirements, design, and verification and validation for the FEHM application - a finite-element heat- and mass-transfer code

    SciTech Connect

    Dash, Z.V.; Robinson, B.A.; Zyvoloski, G.A.

    1997-07-01

    The requirements, design, and verification and validation of the software used in the FEHM application, a finite-element heat- and mass-transfer computer code that can simulate nonisothermal multiphase multicomponent flow in porous media, are described. The test of the DOE Code Comparison Project, Problem Five, Case A, which verifies that FEHM has correctly implemented heat and mass transfer and phase partitioning, is also covered.

  5. Top quark physics: Future Measurements

    SciTech Connect

    Frey, Raymond; Gerdes, David; Jaros, John; Vejcik, Steve; Berger, Edmond L.; Chivukula, R. Sekhar; Cuypers, Frank; Drell, Persis S.; Fero, Michael; Hadley, Nicholas; Han, Tao; Heinson, Ann P.; Knuteson, Bruce; Larios, Francisco; Miettinen, Hannu; Orr, Lynne H.; Peskin, Michael E.; Rizzo, Thomas; Sarid, Uri; Schmidt, Carl; Stelzer, Tim; Sullivan, Zack

    1996-12-31

    We discuss the study of the top quark at future experiments and machines. Top's large mass makes it a unique probe of physics at the natural electroweak scale. We emphasize measurements of the top quark's mass, width, and couplings, as well as searches for rare or nonstandard decays, and discuss the complementary roles played by hadron and lepton colliders.

  6. Measurement of the top quark mass using template methods on dilepton events in p anti-p collisions at s**(1/2) = 1.96-TeV

    SciTech Connect

    Abulencia, A.; Acosta, D.; Adelman, Jahred A.; Affolder, T.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Bologna U. /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara

    2006-02-01

    The authors describe a measurement of the top quark mass from events produced in p{bar p} collisions at a center-of-mass energy of 1.96 TeV, using the Collider Detector at Fermilab. They identify t{bar t} candidates where both W bosons from the top quarks decay into leptons (e{nu}, {mu}{nu}, or {tau}{nu}) from a data sample of 360 pb{sup -1}. The top quark mass is reconstructed in each event separately by three different methods, which draw upon simulated distributions of the neutrino pseudorapidity, t{bar t} longitudinal momentum, or neutrino azimuthal angle in order to extract probability distributions for the top quark mass. For each method, representative mass distributions, or templates, are constructed from simulated samples of signal and background events, and parameterized to form continuous probability density functions. A likelihood fit incorporating these parameterized templates is then performed on the data sample masses in order to derive a final top quark mass. Combining the three template methods, taking into account correlations in their statistical and systematic uncertainties, results in a top quark mass measurement of 170.1 {+-} 6.0(stat.) {+-} 4.1(syst.) GeV/c{sup 2}.

  7. Subzero temperature chromatography and top-down mass spectrometry for protein higher-order structure characterization: method validation and application to therapeutic antibodies.

    PubMed

    Pan, Jingxi; Zhang, Suping; Parker, Carol E; Borchers, Christoph H

    2014-09-17

    Characterization of the higher-order structure and structural dynamics of proteins is crucial for in-depth understanding of their functions. Amide hydrogen/deuterium exchange (HDX), monitored by mass spectrometry (MS), is now a popular technique for measuring protein higher-order structural changes. Although the proteolysis-based HDX-MS approach is most commonly used, the "top-down" approach, which fragments intact proteins directly using electron-based dissociation, is becoming an important alternative and has several advantages. However, the commonly used top-down strategies are direct-infusion based and thus can only be used with volatile buffers. This has meant that the "top-down" approach could not be used for studying proteins under physiological conditions-the very conditions which are often very important for preserving a protein's native structure and function. More complex proteins such as those with disulfide bonds present another challenge. Therefore, there is significant interest in developing novel top-down HDX methods that are applicable to all types of protein samples. In this paper, we show how top-down electron capture dissociation and subzero temperature HPLC can be combined and used for this purpose. This method keeps the back-exchange level as low as 2% and has no limitations in terms of protein type and sample solution conditions. Close to single-residue level protein structural information can be generated. The new method is validated through comparison with NMR data using calmodulin as a model protein. Its capability of determining structural changes in therapeutic antibodies (Herceptin) is also demonstrated. PMID:25152011

  8. A finite element simulation on transient large deformation and mass diffusion in electrodes for lithium ion batteries

    NASA Astrophysics Data System (ADS)

    An, Yonghao; Jiang, Hanqing

    2013-10-01

    Lithium-ion batteries have attracted great deal of attention recently. Silicon is one of the most promising anode materials for high-performance lithium-ion batteries, due to its highest theoretical specific capacity. However, the short lifetime confined by mechanical failure in the silicon anode is now considered to be the biggest challenge in desired applications. High stress induced by the huge volume change due to lithium insertion/extraction is the main reason underlying this problem. Some theoretical models have been developed to address this issue. In order to properly implement these models, we develop a finite element based numerical method using a commercial software package, ABAQUS, as a platform at the continuum level to study fully coupled large deformation and mass diffusion problem. Using this method, large deformation, elasticity-plasticity of the electrodes, various spatial and temporal conditions, arbitrary geometry and dimension could be fulfilled. The interaction between anode and other components of the lithium ion batteries can also be studied as an integrated system. Several specific examples are presented to demonstrate the capability of this numerical platform.

  9. Measurement of the top-quark mass in the tt¯ dilepton channel using the full CDF Run II data set

    SciTech Connect

    Aaltonen, T.

    2015-08-06

    We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run II at center-of-mass energy √s = 1.96 TeV, corresponding to an integrated luminosity of 9.1 fb–1. A special observable is exploited for an optimal reduction of the dominant systematic uncertainty, associated with the knowledge of the absolute energy of the hadronic jets. The distribution of this observable in the selected events is compared to simulated distributions of tt¯ dilepton signal and background. We measure a value for the top-quark mass of 171.5±1.9 (stat)±2.5 (syst) GeV/c2.

  10. Top-down and bottom-up identification of proteins by liquid extraction surface analysis mass spectrometry of healthy and diseased human liver tissue.

    PubMed

    Sarsby, Joscelyn; Martin, Nicholas J; Lalor, Patricia F; Bunch, Josephine; Cooper, Helen J

    2014-11-01

    Liquid extraction surface analysis mass spectrometry (LESA MS) has the potential to become a useful tool in the spatially-resolved profiling of proteins in substrates. Here, the approach has been applied to the analysis of thin tissue sections from human liver. The aim was to determine whether LESA MS was a suitable approach for the detection of protein biomarkers of nonalcoholic liver disease (nonalcoholic steatohepatitis, NASH), with a view to the eventual development of LESA MS for imaging NASH pathology. Two approaches were considered. In the first, endogenous proteins were extracted from liver tissue sections by LESA, subjected to automated trypsin digestion, and the resulting peptide mixture was analyzed by liquid chromatography tandem mass spectrometry (LC-MS/MS) (bottom-up approach). In the second (top-down approach), endogenous proteins were extracted by LESA, and analyzed intact. Selected protein ions were subjected to collision-induced dissociation (CID) and/or electron transfer dissociation (ETD) mass spectrometry. The bottom-up approach resulted in the identification of over 500 proteins; however identification of key protein biomarkers, liver fatty acid binding protein (FABP1), and its variant (Thr→Ala, position 94), was unreliable and irreproducible. Top-down LESA MS analysis of healthy and diseased liver tissue revealed peaks corresponding to multiple (~15-25) proteins. MS/MS of four of these proteins identified them as FABP1, its variant, α-hemoglobin, and 10 kDa heat shock protein. The reliable identification of FABP1 and its variant by top-down LESA MS suggests that the approach may be suitable for imaging NASH pathology in sections from liver biopsies. PMID:25183224

  11. Top-Down and Bottom-Up Identification of Proteins by Liquid Extraction Surface Analysis Mass Spectrometry of Healthy and Diseased Human Liver Tissue

    NASA Astrophysics Data System (ADS)

    Sarsby, Joscelyn; Martin, Nicholas J.; Lalor, Patricia F.; Bunch, Josephine; Cooper, Helen J.

    2014-09-01

    Liquid extraction surface analysis mass spectrometry (LESA MS) has the potential to become a useful tool in the spatially-resolved profiling of proteins in substrates. Here, the approach has been applied to the analysis of thin tissue sections from human liver. The aim was to determine whether LESA MS was a suitable approach for the detection of protein biomarkers of nonalcoholic liver disease (nonalcoholic steatohepatitis, NASH), with a view to the eventual development of LESA MS for imaging NASH pathology. Two approaches were considered. In the first, endogenous proteins were extracted from liver tissue sections by LESA, subjected to automated trypsin digestion, and the resulting peptide mixture was analyzed by liquid chromatography tandem mass spectrometry (LC-MS/MS) (bottom-up approach). In the second (top-down approach), endogenous proteins were extracted by LESA, and analyzed intact. Selected protein ions were subjected to collision-induced dissociation (CID) and/or electron transfer dissociation (ETD) mass spectrometry. The bottom-up approach resulted in the identification of over 500 proteins; however identification of key protein biomarkers, liver fatty acid binding protein (FABP1), and its variant (Thr→Ala, position 94), was unreliable and irreproducible. Top-down LESA MS analysis of healthy and diseased liver tissue revealed peaks corresponding to multiple (~15-25) proteins. MS/MS of four of these proteins identified them as FABP1, its variant, α-hemoglobin, and 10 kDa heat shock protein. The reliable identification of FABP1 and its variant by top-down LESA MS suggests that the approach may be suitable for imaging NASH pathology in sections from liver biopsies.

  12. Four lateral mass screw fixation techniques in lower cervical spine following laminectomy: a finite element analysis study of stress distribution

    PubMed Central

    2014-01-01

    Background Lateral mass screw fixation (LSF) techniques have been widely used for reconstructing and stabilizing the cervical spine; however, complications may result depending on the choice of surgeon. There are only a few reports related to LSF applications, even though fracture fixation has become a severe complication. This study establishes the three-dimensional finite element model of the lower cervical spine, and compares the stress distribution of the four LSF techniques (Magerl, Roy-Camille, Anderson, and An), following laminectomy -- to explore the risks of rupture after fixation. Method CT scans were performed on a healthy adult female volunteer, and Digital imaging and communication in medicine (Dicom) data was obtained. Mimics 10.01, Geomagic Studio 12.0, Solidworks 2012, HyperMesh 10.1 and Abaqus 6.12 software programs were used to establish the intact model of the lower cervical spines (C3-C7), a postoperative model after laminectomy, and a reconstructive model after applying the LSF techniques. A compressive preload of 74 N combined with a pure moment of 1.8 Nm was applied to the intact and reconstructive model, simulating normal flexion, extension, lateral bending, and axial rotation. The stress distribution of the four LSF techniques was compared by analyzing the maximum von Mises stress. Result The three-dimensional finite element model of the intact C3-C7 vertebrae was successfully established. This model consists of 503,911 elements and 93,390 nodes. During flexion, extension, lateral bending, and axial rotation modes, the intact model’s angular intersegmental range of motion was in good agreement with the results reported from the literature. The postoperative model after the three-segment laminectomy and the reconstructive model after applying the four LSF techniques were established based on the validated intact model. The stress distribution for the Magerl and Roy-Camille groups were more dispersive, and the maximum von Mises stress

  13. Top Physics at CDF

    SciTech Connect

    Moon, Chang-Seong

    2011-06-01

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions at a center of mass energy of {radical}s = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  14. In-Line Separation by Capillary Electrophoresis Prior to Analysis by Top-Down Mass Spectrometry Enables Sensitive Characterization of Protein Complexes

    PubMed Central

    2015-01-01

    Intact protein analysis via top-down mass spectrometry (MS) provides a bird’s eye view over the protein complexes and complex protein mixtures with the unique capability of characterizing protein variants, splice isoforms, and combinatorial post-translational modifications (PTMs). Here we applied capillary electrophoresis (CE) through a sheathless CE–electrospray ionization interface coupled to an LTQ Velos Orbitrap Elite mass spectrometer to analyze the Dam1 complex from Saccharomyces cerevisiae. We achieved a 100-fold increase in sensitivity compared to a reversed-phase liquid chromatography coupled MS analysis of recombinant Dam1 complex with a total loading of 2.5 ng (12 amol). N-terminal processing forms of individual subunits of the Dam1 complex were observed as well as their phosphorylation stoichiometry upon Mps1p kinase treatment. PMID:25382489

  15. Top-down and bottom-up lipidomic analysis of rabbit lipoproteins under different metabolic conditions using flow field-flow fractionation, nanoflow liquid chromatography and mass spectrometry.

    PubMed

    Byeon, Seul Kee; Kim, Jin Yong; Lee, Ju Yong; Chung, Bong Chul; Seo, Hong Seog; Moon, Myeong Hee

    2015-07-31

    This study demonstrated the performances of top-down and bottom-up approaches in lipidomic analysis of lipoproteins from rabbits raised under different metabolic conditions: healthy controls, carrageenan-induced inflammation, dehydration, high cholesterol (HC) diet, and highest cholesterol diet with inflammation (HCI). In the bottom-up approach, the high density lipoproteins (HDL) and the low density lipoproteins (LDL) were size-sorted and collected on a semi-preparative scale using a multiplexed hollow fiber flow field-flow fractionation (MxHF5), followed by nanoflow liquid chromatography-ESI-MS/MS (nLC-ESI-MS/MS) analysis of the lipids extracted from each lipoprotein fraction. In the top-down method, size-fractionated lipoproteins were directly infused to MS for quantitative analysis of targeted lipids using chip-type asymmetrical flow field-flow fractionation-electrospray ionization-tandem mass spectrometry (cAF4-ESI-MS/MS) in selected reaction monitoring (SRM) mode. The comprehensive bottom-up analysis yielded 122 and 104 lipids from HDL and LDL, respectively. Rabbits within the HC and HCI groups had lipid patterns that contrasted most substantially from those of controls, suggesting that HC diet significantly alters the lipid composition of lipoproteins. Among the identified lipids, 20 lipid species that exhibited large differences (>10-fold) were selected as targets for the top-down quantitative analysis in order to compare the results with those from the bottom-up method. Statistical comparison of the results from the two methods revealed that the results were not significantly different for most of the selected species, except for those species with only small differences in concentration between groups. The current study demonstrated that top-down lipid analysis using cAF4-ESI-MS/MS is a powerful high-speed analytical platform for targeted lipidomic analysis that does not require the extraction of lipids from blood samples. PMID:26087967

  16. Competitive Binding Sites of a Ruthenium Arene Anticancer Complex on Oligonucleotides Studied by Mass Spectrometry: Ladder-Sequencing versus Top-Down

    NASA Astrophysics Data System (ADS)

    Wu, Kui; Hu, Wenbing; Luo, Qun; Li, Xianchan; Xiong, Shaoxiang; Sadler, Peter J.; Wang, Fuyi

    2013-03-01

    We report identification of the binding sites for an organometallic ruthenium anticancer complex [( η 6-biphenyl)Ru(en)Cl][PF6] ( 1; en = ethylenediamine) on the 15-mer single-stranded oligodeoxynucleotides (ODNs), 5'-CTCTCTX7G8Y9CTTCTC-3' [X = Y = T ( I); X = C and Y = A ( II); X = A and Y = T ( III); X = T and Y = A ( IV)] by electrospray ionization mass spectrometry (ESI-MS) in conjunction with enzymatic digestion or tandem mass spectrometry (top-down MS). ESI-MS combined with enzymatic digestion (termed MS-based ladder-sequencing), is effective for identification of the thermodynamically-favored G-binding sites, but not applicable to determine the thermodynamically unstable T-binding sites because the T-bound adducts dissociate during enzymatic digestion. In contrast, top-down MS is efficient for localization of the T binding sites, but not suitable for mapping ruthenated G bases, due to the facile fragmentation of G bases from ODN backbones prior to the dissociation of the phosphodiester bonds. The combination of the two MS approaches reveals that G8 in each ODN is the preferred binding site for 1, and that the T binding sites of 1 are either T7 or T11 on I and IV, and either T6 or T11 on II and III, respectively. These findings not only demonstrate for the first time that T-bases in single-stranded oligonucleotides are kinetically competitive with guanine for such organoruthenium complexes, but also illustrate the relative merits of the combination of ladder-sequencing and top-down MS approaches to elucidate the interactions of metal anticancer complexes with DNA.

  17. A Measurement of the Top Quark Mass in 1.96 TeV Proton-Antiproton Collisions Using a Novel Matrix Element Method

    SciTech Connect

    Freeman, John

    2007-01-01

    A measurement of the top quark mass in t$\\bar{t}$ → l + jets candidate events, obtained from p$\\bar{p}$ collisions at √s = 1.96 TeV at the Fermilab Tevatron using the CDF II detector, is presented. The measurement approach is that of a matrix element method. For each candidate event, a two dimensional likelihood is calculated in the top pole mass and a constant scale factor, 'JES', where JES multiplies the input particle jet momenta and is designed to account for the systematic uncertainty of the jet momentum reconstruction. As with all matrix element techniques, the method involves an integration using the Standard Model matrix element for t$\\bar{t}$ production and decay. However, the technique presented is unique in that the matrix element is modified to compensate for kinematic assumptions which are made to reduce computation time. Background events are dealt with through use of an event observable which distinguishes signal from background, as well as through a cut on the value of an event's maximum likelihood. Results are based on a 955 pb-1 data sample, using events with a high-pT lepton and exactly four high-energy jets, at least one of which is tagged as coming from a b quark; 149 events pass all the selection requirements. They find Mmeas = 169.8 ± 2.3(stat.) ± 1.4(syst.) GeV/c2.

  18. A measurement of the top quark mass in 1.96 TeV proton-antiproton collisions using a novel matrix element method

    SciTech Connect

    Freeman, John C

    2007-01-01

    A measurement of the top quark mass in t$\\bar{t}$ → l + jets candidate events, obtained from p$\\bar{p}$ collisions at √s = 1.96 TeV at the Fermilab Tevatron using the CDF II detector, is presented. The measurement approach is that of a matrix element method. For each candidate event, a two dimensional likelihood is calculated in the top pole mass and a constant scale factor, 'JES', where JES multiplies the input particle jet momenta and is designed to account for the systematic uncertainty of the jet momentum reconstruction. As with all matrix elements techniques, the method involves an integration using the Standard Model matrix element for tt production and decay. however, the technique presented is unique in that the matrix element is modified to compensate for kinematic assumptions which are made to reduce computation time. Background events are dealt with through use of an event observable which distinguishes signal from background, as well as through a cut on the value of an event's maximum likelihood. Results are based on a 955 pb-1 data sample, using events with a high-pT lepton and exactly four high-energy jets, at least one of which is tagged as coming from a b quark; 149 events pass all the selection requirements. They find Mmeas = 169.8 ± 2.3(stat.) ± 1.4(syst.) GeV/c2.

  19. Measurements of the Top-quark Mass and the $t\\bar{t}$ Cross Section in the Hadronic $\\tau +$ Jets Decay Channel at $\\sqrt{s} = 1.96$ TeV

    SciTech Connect

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; /Dubna, JINR /Texas A-M

    2012-08-01

    We present the first direct measurement of the top-quark mass using t{bar t} events decaying in the hadronic {tau} + jets decay channel. Using data corresponding to an integrated luminosity of 2.2 fb{sup -1} collected by the CDF II detector in p{bar p} collisions at {radical}s = 1.96 TeV at the Fermilab Tevatron, we measure the t{bar t} cross section, {sigma}{sub t{bar t}}, and the top-quark mass, M{sub top}. We extract M{sub top} from a likelihood based on per-event probabilities calculated with leading-order signal and background matrix elements. We measure {sigma}{sub t{bar t}} = 8.8 {+-} 3.3 (stat) {+-} 2.2 (syst) pb and M{sub top} = 172.7 {+-} 9.3 (stat) {+-} 3.7 (syst) GeV/c{sup 2}.

  20. New Protein Footprinting: Fast Photochemical Iodination Combined with Top-Down and Bottom-Up Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Chen, Jiawei; Cui, Weidong; Giblin, Daryl; Gross, Michael L.

    2012-08-01

    We report a new approach for the fast photochemical oxidation of proteins (FPOP) whereby iodine species are used as the modifying reagent. We generate the radicals by photolysis of iodobenzoic acid at 248 nm; the putative iodine radical then rapidly modifies the target protein. This iodine-radical labeling is sensitive, tunable, and site-specific, modifying only histidine and tyrosine residues in contrast to OH radicals that modify 14 amino-acid side chains. We iodinated myoglobin (Mb) and apomyoglobin (aMb) in their native states and analyzed the outcome by both top-down and bottom-up proteomic strategies. Top-down sequencing selects a certain level (addition of one I, two I's) of modification and determines the major components produced in the modification reaction, whereas bottom-up reveals details for each modification site. Tyr146 is found to be modified for aMb but less so for Mb. His82, His93, and His97 are at least 10 times more modified for aMb than for Mb, in agreement with NMR studies. For carbonic anhydrase and its apo form, there are no significant differences of the modification extents, indicating their similarity in conformation and providing a control for this approach. For lispro insulin, insulin-EDTA, and insulin complexed with zinc, iodination yields are sensitive to differences in insulin oligomerization state. The iodine radical labeling is a promising addition to protein footprinting methods, offering higher specificity and lower reactivity than •OH and SO{4/-•}, two other radicals already employed in FPOP.

  1. New Protein Footprinting: Fast Photochemical Iodination Combined with Top-down and Bottom-up Mass Spectrometry

    PubMed Central

    Chen, Jiawei; Cui, Weidong; Giblin, Daryl; Gross, Michael L.

    2013-01-01

    We report a new approach for the FPOP (fast photochemical oxidation of proteins) whereby iodine species are used as the modifying reagent. We generate the radicals by photolysis of iodobenzoic acid at 248 nm; the putative iodine radical then rapidly modifies the target protein. This iodine-radical labeling is sensitive, tunable, and site-specific, modifying only histidine and tyrosine residues in contrast to OH radicals that modify 14 amino-acid side chains. We iodinated myoglobin (Mb) and apomyoglobin (aMb) in their native states and analyzed the outcome by both top-down and bottom-up proteomic strategies. Top-down sequencing selects a certain level (addition of one I, two I's) of modification and determines the major components produced in the modification reaction, whereas bottom-up reveals details for each modification site. Tyr146 is found to be modified for aMb but less so for Mb. His82, His93 and His97 are at least 10 times more modified for aMb than for Mb, in agreement with NMR studies. For carbonic anhydrase and its apo form, there are no significant differences of the modification extents, indicating their similarity in conformation and providing a control for this approach. For lispro insulin, insulin-EDTA, and insulin complexed with zinc, iodination yields are sensitive to differences in insulin oligomerization state. The iodine radical labeling is a promising addition to protein footprinting methods, offering higher specificity and lower reactivity than ·OH and SO4-·, two other radicals already employed in FPOP. PMID:22669760

  2. Top-Higgs and top-pion phenomenology in the top triangle moose model

    NASA Astrophysics Data System (ADS)

    Chivukula, R. Sekhar; Simmons, Elizabeth H.; Coleppa, Baradhwaj; Logan, Heather E.; Martin, Adam

    2011-03-01

    We discuss the deconstructed version of a topcolor-assisted technicolor model wherein the mechanism of top quark mass generation is separated from the rest of electroweak symmetry breaking. The minimal deconstructed version of this scenario is a “triangle moose” model, where the top quark gets its mass from coupling to a top-Higgs field, while the gauge boson masses are generated from a Higgsless sector. The spectrum of the model includes scalar (top-Higgs) and pseudoscalar (top-pion) states. In this paper, we study the properties of these particles, discuss their production mechanisms and decay modes, and suggest how best to search for them at the LHC.

  3. Top-Higgs and top-pion phenomenology in the top triangle moose model

    SciTech Connect

    Chivukula, R. Sekhar; Simmons, Elizabeth H.; Coleppa, Baradhwaj; Logan, Heather E.; Martin, Adam

    2011-03-01

    We discuss the deconstructed version of a topcolor-assisted technicolor model wherein the mechanism of top quark mass generation is separated from the rest of electroweak symmetry breaking. The minimal deconstructed version of this scenario is a ''triangle moose'' model, where the top quark gets its mass from coupling to a top-Higgs field, while the gauge boson masses are generated from a Higgsless sector. The spectrum of the model includes scalar (top-Higgs) and pseudoscalar (top-pion) states. In this paper, we study the properties of these particles, discuss their production mechanisms and decay modes, and suggest how best to search for them at the LHC.

  4. Rapid Identification of Food-borne Pathogens by Top-Down Proteomics Using MALDI-TOF/TOF Mass Spectrometry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Rapid identification of bacterial microorganisms is particularly relevant to efforts to monitor the safety and security of domestically grown and imported foods. Mass spectrometry (MS) is increasingly utilized to identify and characterize bacterial microorganisms and in particular food-borne pathog...

  5. Top-Down Mass Spectrometry Analysis of Membrane-Bound Light-Harvesting Complex 2 from Rhodobacter sphaeroides.

    PubMed

    Lu, Yue; Zhang, Hao; Cui, Weidong; Saer, Rafael; Liu, Haijun; Gross, Michael L; Blankenship, Robert E

    2015-12-15

    We report a top-down proteomic analysis of the membrane-bound peripheral light-harvesting complex LH2 isolated from the purple photosynthetic bacterium Rhodobacter sphaeroides. The LH2 complex is coded for by the puc operon. The Rb. sphaeroides genome contains two puc operons, designated puc1BAC and puc2BA. Although previous work has shown consistently that the LH2 β polypeptide coded by the puc2B gene was assembled into LH2 complexes, there are contradictory reports as to whether the Puc2A polypeptides are incorporated into LH2 complexes. Furthermore, post-translational modifications of this protein offer the prospect that it could coordinate bacteriochlorophyll a (Bchl a) by a modified N-terminal residue. Here, we describe the components of the LH2 complex on the basis of electron-capture dissociation fragmentation to confirm the identity and sequence of the protein's subunits. We found that both gene products of the β polypeptides are expressed and assembled in the mature LH2 complex, but only the Puc1A-encoded polypeptide α is observed here. The methionine of the Puc2B-encoded polypeptide is missing, and a carboxyl group is attached to the threonine at the N-terminus. Surprisingly, one amino acid encoded as an isoleucine in both the puc2B gene and the mRNA is found as valine in the mature LH2 complex, suggesting an unexpected and unusual post-translational modification or a specific tRNA recoding of this one amino acid. PMID:26574182

  6. Discovery of a linear cyclotide from the bracelet subfamily and its disulfide mapping by top-down mass spectrometry.

    PubMed

    Nguyen, Giang Kien Truc; Zhang, Sen; Wang, Wei; Wong, Clarence Tsun Ting; Nguyen, Ngan Thi Kim; Tam, James P

    2011-12-30

    Cyclotides are heat-stable macrocyclic peptides from plants that display a wide range of biological activities. They can be divided into two subfamilies: Möbius or bracelet, based on the presence or absence of a cis-proline residue in loop 5, respectively. Currently, over 150 cyclotides have been discovered, but only four linear variants of the Möbius subfamily have been hitherto isolated. In this study, we report the discovery of two novel cyclotides, hedyotide B1 and hedyotide B2, from the aerial parts of Hedyotis biflora. Hedyotide B1 has a cyclic cystine knot structure typical of cyclotides. Interestingly, hedyotide B2 possesses a linear backbone and is the first linear representative of the bracelet subfamily. Disulfide mapping of hedyotide B2 by a top-down MS/MS approach showed that it shares the same knotted disulfide arrangement as conventional cyclotides. Its unfolding pathway also showed that the penetrating disulfide bond Cys III-VI is the most stable disulfide linkage. Cloning of the gene encoding hedyotide B2 revealed a nonsense mutation that introduces a premature stop codon at the conserved Asn residue position, which is essential for an end-to-end backbone ligation. Biophysical characterization showed that hedyotide B2 was more susceptible to exopeptidase degradation as compared with hedyotide B1. Hedyotide B2 was also inactive against all four tested bacterial strains, whereas hedyotide B1 was bactericidal to Escherichia coli and Streptococcus salivarius at low micromolar concentration. Our results provide a deeper understanding of the structures, functions, and biosynthetic processing of cyclotides and uncyclotides in plants. PMID:21979955

  7. Top physics results at CDF

    SciTech Connect

    Vickey, Trevor; /Illinois U., Urbana

    2005-05-01

    The most recent results on top quark physics at CDF are reported. Measurements of cross-section and mass are presented, and the status of single top quark production searches are discussed. The results obtained from probing various top quark properties are also presented.

  8. Characterization and quantification of intact 26S proteasome proteins by real-time measurement of intrinsic fluorescence prior to top-down mass spectrometry.

    PubMed

    Russell, Jason D; Scalf, Mark; Book, Adam J; Ladror, Daniel T; Vierstra, Richard D; Smith, Lloyd M; Coon, Joshua J

    2013-01-01

    Quantification of gas-phase intact protein ions by mass spectrometry (MS) is impeded by highly-variable ionization, ion transmission, and ion detection efficiencies. Therefore, quantification of proteins using MS-associated techniques is almost exclusively done after proteolysis where peptides serve as proxies for estimating protein abundance. Advances in instrumentation, protein separations, and informatics have made large-scale sequencing of intact proteins using top-down proteomics accessible to the proteomics community; yet quantification of proteins using a top-down workflow has largely been unaddressed. Here we describe a label-free approach to determine the abundance of intact proteins separated by nanoflow liquid chromatography prior to MS analysis by using solution-phase measurements of ultraviolet light-induced intrinsic fluorescence (UV-IF). UV-IF is measured directly at the electrospray interface just prior to the capillary exit where proteins containing at least one tryptophan residue are readily detected. UV-IF quantification was demonstrated using commercially available protein standards and provided more accurate and precise protein quantification than MS ion current. We evaluated the parallel use of UV-IF and top-down tandem MS for quantification and identification of protein subunits and associated proteins from an affinity-purified 26S proteasome sample from Arabidopsis thaliana. We identified 26 unique proteins and quantified 13 tryptophan-containing species. Our analyses discovered previously unidentified N-terminal processing of the β6 (PBF1) and β7 (PBG1) subunit - such processing of PBG1 may generate a heretofore unknown additional protease active site upon cleavage. In addition, our approach permitted the unambiguous identification and quantification both isoforms of the proteasome-associated protein DSS1. PMID:23536786

  9. Measurement of the top quark mass with the dynamical likelihood method using lepton plus jets events with b-tags in pp collisions at {radical}(s)=1.96 TeV

    SciTech Connect

    Abulencia, A.; Budd, S.; Chu, P.H.; Ciobanu, C.I.; Errede, D.; Errede, S.; Gerberich, H.; Grundler, U.; Junk, T.R.; Kraus, J.; Liss, T.M.; Marino, C.; Pitts, K.; Rogers, E.; Taffard, A.; Veramendi, G.; Vickey, T.; Zhang, X.; Acosta, D.; Cruz, A.

    2006-05-01

    This paper describes a measurement of the top quark mass, M{sub top}, with the dynamical likelihood method (DLM) using the CDF II detector at the Fermilab Tevatron. The Tevatron produces top/antitop (tt) pairs in pp collisions at a center-of-mass energy of 1.96 TeV. The data sample used in this analysis was accumulated from March 2002 through August 2004, which corresponds to an integrated luminosity of 318 pb{sup -1}. We use the tt candidates in the 'lepton+jets' decay channel, requiring at least one jet identified as a b quark by finding a displaced secondary vertex. The DLM defines a likelihood for each event based on the differential cross section as a function of M{sub top} per unit phase space volume of the final partons, multiplied by the transfer functions from jet to parton energies. The method takes into account all possible jet combinations in an event, and the likelihood is multiplied event by event to derive the top quark mass by the maximum likelihood method. Using 63 tt candidates observed in the data, with 9.2 events expected from background, we measure the top quark mass to be 173.2(+2.6/-2.4)(stat.){+-}3.2(syst.) GeV/c{sup 2}, or 173.2(+4.1/-4.0) GeV/c{sup 2}.

  10. Top quark mass determination on double b-tagged events in barpp Collsions at √s = 1.8 TeV

    NASA Astrophysics Data System (ADS)

    CDF Collaboration

    1996-05-01

    We report on the measurement of the top quark mass using complete kinematic reconstruction of events containing a W and 4 jets. Two of the jets are required to be identified as b-jets. Data were collected by the Collider Detector at Fermilab (CDF) in the barpp collisions at √s = 1.8 TeV. Results are reported for 110 pb-1 of integrated luminosity. We thank the Fermilab staff and the technical staffs of the participating institutions for their vital contributions. This work was supported by the U.S. Department of Energy and National Science Foundation; the Italian Istituto Nazionale di Fisica Nucleare; the Ministry of Education, Science and Culture of Japan; the Natural Sciences and Engineering Research Council of Canada; the National Science Council of the Republic of China; and the A. P. Sloan Foundation. Supported by the Ministry of Education, Science and Culture of Japan.

  11. Construction and testing of a Top Counting Detector and a Bottom Counting Detector for the Cosmic Ray Energetics And Mass experiment on the International Space Station

    NASA Astrophysics Data System (ADS)

    Hwang, Y. S.; Kim, H. J.; Anderson, T.; Angelaszek, D.; Copley, M.; Coutu, S.; Han, J. H.; Huh, H. G.; Kah, D. H.; Kim, K. C.; Kwashnak, K.; Lee, M. H.; Link, J. T.; Lutz, L.; Malinin, A.; Mitchell, J. W.; Nutter, S.; Ofoha, O.; Jeon, H. B.; Hyun, H. J.; Park, H.; Park, J. M.; Patterson, P.; Seo, E. S.; Wu, J.; Yoon, Y. S.

    2015-07-01

    The Cosmic Ray Energetics And Mass (CREAM) mission is planned for launch in 2015 to the International Space Station (ISS) to research high-energy cosmic rays. Its aim is to understand the acceleration and propagation mechanism of high-energy cosmic rays by measuring their compositions. The Top Counting Detector and Bottom Counting Detector (T/BCD) were built to discriminate electrons from protons by using the difference in cascade shapes between electromagnetic and hadronic showers. The T/BCD provides a redundant instrument trigger in flight as well as a low-energy calibration trigger for ground testing. Each detector consists of a plastic scintillator and two-dimensional silicon photodiode array with readout electronics. The TCD is located between the carbon target and the calorimeter, and the BCD is located below the calorimeter. In this paper, we present the design, assembly, and performance of the T/BCD.

  12. Data on endogenous chicken sperm peptides and small proteins obtained through Top-Down High Resolution Mass Spectrometry.

    PubMed

    Soler, L; Labas, V; Thélie, A; Teixeira-Gomes, A P; Grasseau, I; Bouguereau, L; Blesbois, E

    2016-09-01

    The endogenous peptides and small proteins present in chicken sperm were identified in the context of the characterization of a fertility-diagnostic method based on the use of ICM-MS (Intact Cell Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry). The interpretation and description of these data can be found in a research article, "Intact cell MALDI-TOF MS on sperm: a molecular test for male fertility diagnosis" (Soler et al., 2016) [1], and raw data derived from this analysis have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PRIDE: PXD002768. Here, we describe the inventory of all the molecular species identified, along with their biochemical features and functional analysis. This peptide/protein catalogue can be further employed as reference for other studies and reveal that the use of proteomics allows for a global evaluation of sperm cells functions. PMID:27617276

  13. MALDI-ISD Mass Spectrometry Analysis of Hemoglobin Variants: a Top-Down Approach to the Characterization of Hemoglobinopathies

    NASA Astrophysics Data System (ADS)

    Théberge, Roger; Dikler, Sergei; Heckendorf, Christian; Chui, David H. K.; Costello, Catherine E.; McComb, Mark E.

    2015-08-01

    Hemoglobinopathies are the most common inherited disorders in humans and are thus the target of screening programs worldwide. Over the past decade, mass spectrometry (MS) has gained a more important role as a clinical means to diagnose variants, and a number of approaches have been proposed for characterization. Here we investigate the use of matrix-assisted laser desorption/ionization time-of-flight MS (MALDI-TOF MS) with sequencing using in-source decay (MALDI-ISD) for the characterization of Hb variants. We explored the effect of matrix selection using super DHB or 1,5-diaminonaphthalene on ISD fragment ion yield and distribution. MALDI-ISD MS of whole blood using super DHB simultaneously provided molecular weights for the alpha and beta chains, as well as extensive fragmentation in the form of sequence defining c-, (z + 2)-, and y-ion series. We observed sequence coverage on the first 70 amino acids positions from the N- and C-termini of the alpha and beta chains in a single experiment. An abundant beta chain N-terminal fragment ion corresponding to βc34 was determined to be a diagnostic marker ion for Hb S (β6 Glu→Val, sickle cell), Hb C (β6 Glu→Lys), and potentially for Hb E (β26 Glu→Lys). The MALDI-ISD analysis of Hb S and HbSC yielded mass shifts corresponding to the variants, demonstrating the potential for high-throughput screening. Characterization of an alpha chain variant, Hb Westmead (α122 His→Gln), generated fragments that established the location of the variant. This study is the first clinical application of MALDI-ISD MS for the determination and characterization of hemoglobin variants.

  14. Top physics at CDF

    SciTech Connect

    Hughes, R.E.

    1997-01-01

    We report on top physics results using a 100 pb{sup -1} data sample of p{bar p} collisions at {radical}s = 1.8 TeV collected with the Collider Detector at Fermilab (CDF). We have identified top signals in a variety of decay channels, and used these channels to extract a measurement of the top mass and production cross section. A subset of the data (67 pb{sup -1}) is used to determine M{sub top} = 176 {+-} 8(stat) {+-} 10(syst) and {sigma}(tt) = 7.6 {sub -2.0}{sup +2.4} pb. We present studies of the kinematics of t{bar t} events and extract the first direct measurement of V{sub tb}. Finally, we indicate prospects for future study of top physics at the Tevatron.

  15. Measurement of the t t-bar production cross section and the top quark mass in the dilepton channel in pp collisions at sqrt(s) =7 TeV

    SciTech Connect

    Chatrchyan, Serguei; Khachatryan, Vardan; Sirunyan, Albert M.; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Ero, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; /Yerevan Phys. Inst. /Vienna, OAW /Minsk, High Energy Phys. Ctr. /Antwerp U., WISINF /Vrije U., Brussels /Brussels U. /Gent U. /Louvain U. /UMH, Mons /Rio de Janeiro, CBPF /Rio de Janeiro State U. /Yerevan Phys. Inst. /Vienna, OAW /Minsk, High Energy Phys. Ctr. /Antwerp U., WISINF /Vrije U., Brussels /Brussels U. /Gent U. /Louvain U. /UMH, Mons /Rio de Janeiro, CBPF /Rio de Janeiro State U. /Yerevan Phys. Inst. /Vienna, OAW /Minsk, High Energy Phys. Ctr. /Antwerp U., WISINF /Vrije U., Brussels /Brussels U. /Gent U. /Louvain U. /UMH, Mons /Rio de Janeiro, CBPF /Rio de Janeiro State U.

    2011-05-01

    The t{bar t} production cross section and top quark mass are measured in proton-proton collisions at {radical}s = 7 TeV in a data sample corresponding to an integrated luminosity of 36 pb{sup -1} collected by the CMS experiment. The measurements are performed in events with two leptons (electrons or muons) in the final state. Results of the cross section measurement in events with and without b-quark identification are obtained and combined. The measured value is {sigma}{sub t{bar t}} = 168 {+-} 18 (stat.) {+-} 14 (syst.) {+-} 7 (lumi.) pb, consistent with predictions from the standard model. The top quark mass m{sub top} is reconstructed with two different methods, a full kinematic analysis and a matrix weighting technique. The combination yields a measurement of m{sub top} = 175.5 {+-} 4.6 (stat.) {+-} 4.6 (syst.) GeV/c{sup 2}.

  16. Forward-Backward Asymmetry at High Mass in Top Quark Pair Production in Proton-Antiproton Collisions at Center of Mass Energy = 1.96 TeV

    NASA Astrophysics Data System (ADS)

    Eppig, Andrew Peter

    We present a new measurement of the inclusive forward-backward tt¯ production asymmetry and its mass dependence. The measurements are performed with data corresponding to an integrated luminosity of L = 5.3 fb-1 of pp¯ collisions at s = 1.96 TeV, recorded with the CDF II Detector at the Fermilab Tevatron. Significant inclusive asymmetries are observed in both the laboratory frame and the tt¯ rest frame, and in both cases are found to be consistent with CP conservation under interchange of t and t¯. In the tt¯ rest frame, the asymmetry is observed to increase with the invariant mass, Mtt¯, of the tt¯ system. Fully corrected parton-level asymmetries are derived in two regions of Mtt¯, and the asymmetry is found to be most significant at large Mtt¯ . For Mtt¯ ≥ 450 GeV/ c2, the parton-level asymmetry in the tt¯ rest frame is Att¯ = 0.475 +/- 0.114 compared to a next-to-leading order QCD prediction of 0.088 +/- 0.013.

  17. Top-Down 193-nm Ultraviolet Photodissociation Mass Spectrometry for Simultaneous Determination of Polyubiquitin Chain Length and Topology

    PubMed Central

    2016-01-01

    Protein ubiquitin modifications present a vexing analytical challenge, because of the dynamic changes in the site of modification on the substrate, the number of ubiquitin moieties attached, and the diversity of linkage patterns in which they are attached. Presented here is a method to confidently assign size and linkage type of polyubiquitin modifications. The method combines intact mass measurement to determine the number of ubiquitin moieties in the chain with backbone fragmentation by 193-nm ultraviolet photodissociation (UVPD) to determine the linkage pattern. UVPD fragmentation of proteins leads to reproducible backbone cleavage at almost every inter-residue position, and in polyubiquitin chains, the N-terminally derived fragments from each constituent monomer are identical, up to the site of conjugation. The N-terminal ubiquitin fragment ions are superimposed to create a diagnostic pattern that allows easy recognition of the dominant chain linkages. The method is demonstrated by achieving almost-complete fragmentation of monoubiquitin and then, subsequently, fragmentation of dimeric, tetrameric, and longer Lys48- and Lys63-linked ubiquitin chains. The utility of the method for the analysis of mixed linkage chains is confirmed for mixtures of Lys48 and Lys63 tetramers with known relative concentrations and for an in vitro-formulated ubiquitin chain attached to a substrate protein. PMID:25559986

  18. Top Quark Properties

    SciTech Connect

    Peters, Yvonne

    2011-12-01

    Since its discovery in 1995 by the CDF and D0 collaborations at the Fermilab Tevatron collider, the top quark has undergone intensive studies. Besides the Tevatron experiments, with the start of the LHC in 2010 a top quark factory started its operation. It is now possible to measure top quark properties simultaneously at four different experiments, namely ATLAS and CMS at LHC and CDF and D0 at Tevatron. Having collected thousands of top quarks each, several top quark properties have been measured precisely, while others are being measured for the first time. In this article, recent measurements of top quark properties from ATLAS, CDF, CMS and D0 are presented, using up to 5.4 fb{sup -1} of integrated luminosity at the Tevatron and 1.1 fb{sup -1} at the LHC. In particular, measurements of the top quark mass, mass difference, foward backward charge asymmetry, t{bar t} spin correlations, the ratio of branching fractions, W helicity, anomalous couplings, color flow and the search for flavor changing neutral currents are discussed.

  19. Transport of Mass and Water Vapor in Cumulus Topped Boundary Layer: A Case-Study from Arm Darwin Facility

    NASA Astrophysics Data System (ADS)

    Ghate, V. P.; Jensen, M. P.

    2014-12-01

    Shallow cumulus clouds are intimately tied to the turbulence in the boundary layer and transport momentum and enthalpy upwards from the surface. These clouds have a significant impact on the Earth's radiation budget as they reflect more incoming solar radiation back to space compared to the underlying surface. They form when water vapor is transported upwards from the surface above the lifting condensation level at which point the water vapor condenses to form cloud droplets. These clouds typically have a life-time of less than an hour after which they evaporate, with the active cumuli venting the boundary layer moisture into the free troposphere. We use data collected during a 24-hour period at the Atmospheric Radiation Measurement (ARM) observing facility at Darwin, Australia to study the turbulent transport of mass and water vapor associated with shallow cumulus clouds. The instruments at the site include a vertically pointing Doppler cloud radar, Doppler Lidar, ceilometer among others. Three balloon borne radiosondes were also launched during the study period. Data from the cloud radar and Doppler Lidar were combined to retrieve the vertical velocity structure of the entire boundary layer at a high resolution (2 sec; 30 m). Additionally, high resolution (10 s; 37 m) retrievals of water vapor mixing ratio were also performed using the data collected by the collocated Raman Lidar. We will use the high resolution observations of vertical velocity and water vapor to characterize the second order turbulent transport terms of water vapor and vertical velocity. These turbulent transport terms will then be used together with a parcel model to calculate entrainment rates of individual cloud elements. The contrast in the entrainment rates of forced, active and passive cumuli will be presented together with the moisture and dynamic structure of surrounding environmental air.

  20. Top studies

    SciTech Connect

    T. Dorigo

    2003-01-02

    The top quark, discovered in 1994 at the Tevatron, has proven a very interesting particle. Its characteristics allow both to perform stringent tests of electroweak theory, and to search for new physics through a deviation from standard model predictions for several of its peculiar properties. I will review the status of top physics and briefly describe the potential of experiments of the near future.

  1. Probing the unfolding of myoglobin and domain C of PARP-1 with covalent labeling and top-down ultraviolet photodissociation mass spectrometry.

    PubMed

    Cammarata, Michael; Lin, Ke-Yi; Pruet, Jeff; Liu, Hung-Wen; Brodbelt, Jennifer

    2014-03-01

    Ultraviolet photodissocation (UVPD) mass spectrometry was used for high mass accuracy top-down characterization of two proteins labeled by the chemical probe, S-ethylacetimidate (SETA), in order to evaluate conformational changes as a function of denaturation. The SETA labeling/UVPD-MS methodology was used to monitor the mild denaturation of horse heart myoglobin by acetonitrile, and the results showed good agreement with known acetonitrile and acid unfolding pathways of myoglobin. UVPD outperformed electron transfer dissociation (ETD) in terms of sequence coverage, allowing the SETA reactivity of greater number of lysine amines to be monitored and thus providing a more detailed map of myoglobin. This strategy was applied to the third zinc-finger binding domain, domain C, of PARP-1 (PARP-C), to evaluate the discrepancies between the NMR and crystal structures which reported monomer and dimer forms of the protein, respectively. The trends reflected from the reactivity of each lysine as a function of acetonitrile denaturation in the present study support that PARP-C exists as a monomer in solution with a close-packed C-terminal α helix. Additionally, those lysines for which the SETA reactivity increased under denaturing conditions were found to engage in tertiary polar contacts such as salt bridging and hydrogen bonding, providing evidence that the SETA/UVPD-MS approach offers a versatile means to probe the interactions responsible for conformational changes in proteins. PMID:24484264

  2. Combining bottom-up and top-down mass spectrometric strategies for de novo sequencing of the crustacean hyperglycemic hormone from Cancer borealis.

    PubMed

    Ma, Mingming; Chen, Ruibing; Ge, Ying; He, Huan; Marshall, Alan G; Li, Lingjun

    2009-01-01

    The crustacean hyperglycemic hormone (CHH) is a 72-amino acid residue polypeptide with multiple physiological effects. The X-organ/sinus gland is the primary source for CHH and its family members. However, the amino acid sequence of CHH in Cancer borealis , a premier model system for neuromodulation, has not been characterized. In this study, a novel hybrid strategy combining "bottom-up" and "top-down" methodologies enabled direct sequencing of CHH peptide in the sinus gland of C. borealis . Multiple mass spectrometry (MS)-based techniques were employed to characterize the CHH peptide, including direct tissue analysis by MALDI-FT-ICR-MS, de novo sequencing of tryptic digested CHH by nano-LC/ESI-Q-TOF MS and intact CHH analysis by LC/FT-ICR-MS. In-trap cleaning removed the extensive matrix adducts of CHH in the direct tissue analysis by MALDI-FT-ICR-MS. Fragmentation efficiency of the intact CHH was drastically improved after the reduction-alkylation of the disulfide bonds. The sequence coverage was further enhanced by employing multiple complementary fragmentation techniques. Overall, this example is the largest neuropeptide de novo sequenced in C. borealis by mass spectrometric methods. PMID:19046072

  3. Tune-out wavelength around 413 nm for the helium 2 3S1 state including relativistic and finite-nuclear-mass corrections

    NASA Astrophysics Data System (ADS)

    Zhang, Yong-Hui; Tang, Li-Yan; Zhang, Xian-Zhou; Shi, Ting-Yun

    2016-05-01

    The tune-out wavelength at 413 nm for the 2 3S1 state of helium is expected to be sensitive to finite nuclear mass, relativistic, and quantum electrodynamic (QED) corrections, which provides a scheme for testing atomic structure theory [J. Mitroy and L.-Y. Tang, Phys. Rev. A 88, 052515 (2013), 10.1103/PhysRevA.88.052515]. In the present work, a large-scale full-configuration-interaction calculation based on both the Dirac-Coulomb-Breit Hamiltonian and the nonrelativistic Hamiltonian is performed for the dynamic dipole polarizabilities of helium in the 2 3S1 state. The tune-out wavelengths for the magnetic sublevels MJ=0 and MJ=±1 are determined to be 413.0801(4) nm and 413.0859(4) nm, respectively, at sub-ppm accuracy, including finite nuclear mass and relativistic corrections. Our value for the MJ=1 sublevel agrees with the measured value of 413.0938(20)(9) nm [B. M. Henson et al., Phys. Rev. Lett. 115, 043004 (2015), 10.1103/PhysRevLett.115.043004] at the level of 19 ppm. The discrepancy between these two values is mainly due to the uncalculated QED contribution. Our current value confirms quantitatively the prediction of Mitroy and Tang. Also, for the state of 2 3S1 we find that the corrections due to finite nuclear mass and relativistic effects to the static dipole polarizability of 315.7227(4)a03 are about 600 ppm and 310 ppm, respectively, which are about 1.4 and 5.4 times larger than those for the ground state. A measurement at the level of 10 ppm for the static dipole polarizability of helium in 2 3S1 can be used to determine the transition matrix element between 2 3S and 2 3P at the level of 10-5.

  4. Strict site-occupation constraint in two-dimensional Heisenberg models and dynamical mass generation in QED{sub 3} at finite temperature

    SciTech Connect

    Dillenschneider, Raoul; Richert, Jean

    2006-06-01

    We study the effect of site occupation in two-dimensional quantum spin systems at finite temperature in a {pi}-flux state description at the mean-field level. We impose each lattice site to be occupied by a single SU(2) spin. This is realized by means of a specific prescription. We consider the low-energy Hamiltonian which is mapped into a QED{sub 3} Lagrangian of spinons. We compare the dynamically generated mass to the one obtained by means of an average site occupation constraint.

  5. Heat and mass transfer in a dissociated laminar boundary layer of air with consideration of the finite rate of chemical reaction

    NASA Technical Reports Server (NTRS)

    Oyegbesan, A. O.; Algermissen, J.

    1986-01-01

    A numerical investigation of heat and mass transfer in a dissociated laminar boundary layer of air on an isothermal flat plate is carried out for different degrees of cooling of the wall. A finite-difference chemical model is used to study elementary reactions involving NO2 and N2O. The analysis is based on equations of continuity, momentum, energy, conservation and state for the two-dimensional viscous flow of a reacting multicomponent mixtures. Attention is given to the effects of both catalyticity and noncatalyticity of the wall.

  6. Measurement of the top quark mass with the dynamical likelihood method using lepton plus jets events with b-tags in p anti-p collisions at s**(1/2) = 1.96-TeV

    SciTech Connect

    Abulencia, A.; Acosta, D.; Adelman, Jahred A.; Affolder, Anthony A.; Akimoto, T.; Albrow, M.G.; Ambrose, D.; Amerio, S.; Amidei, D.; Anastassov, A.; Anikeev, K.; /Taiwan, Inst. Phys. /Argonne /Barcelona, IFAE /Baylor U. /INFN, Bologna /Bologna U. /Brandeis U. /UC, Davis /UCLA /UC, San Diego /UC, Santa Barbara

    2005-12-01

    This report describes a measurement of the top quark mass, M{sub top}, with the dynamical likelihood method (DLM) using the CDF II detector at the Fermilab Tevatron. The Tevatron produces top/anti-top (t{bar t}) pairs in p{bar p} collisions at a center-of-mass energy of 1.96 TeV. The data sample used in this analysis was accumulated from March 2002 through August 2004, which corresponds to an integrated luminosity of 318 pb{sup -1}. They use the t{bar t} candidates in the ''lepton+jets'' decay channel, requiring at least one jet identified as a b quark by finding an displaced secondary vertex. The DLM defines a likelihood for each event based on the differential cross section as a function of M{sub top} per unit phase space volume of the final partons, multiplied by the transfer functions from jet to parton energies. The method takes into account all possible jet combinations in an event, and the likelihood is multiplied event by event to derive the top quark mass by the maximum likelihood method. Using 63 t{bar t} candidates observed in the data, with 9.2 events expected from background, they measure the top quark mass to be 173.2{sub -2.4}{sup +2.6}(stat.) {+-} 3.2(syst.) GeV/c{sup 2}, or 173.2{sub -4.0}{sup +4.1} GeV/c{sup 2}.

  7. Top Quark Mass Measurement in the t anti-t All Hadronic Channel using a Matrix Element Technique in p anti-p Collisions at s**91/2) = 1.96-TeV

    SciTech Connect

    Aaltonen, T.; Adelman, J.; Akimoto, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, Dante E.; Anastassov, A.; Annovi, Alberto; Antos, J.; Apollinari, G.; Apresyan, A.; /Purdue U. /Waseda U.

    2008-11-01

    We present a measurement of the top quark mass in the all-hadronic channel (t{bar t} {yields} b{bar b} q{sub 1}{bar q}{sub 2}q{sub 3}{bar q}{sub 4}) using 943 pb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV collected at the CDF II detector at Fermilab (CDF). We apply the standard model production and decay matrix-element (ME) to t{bar t} candidate events. We calculate per-event probability densities according to the ME calculation and construct template models of signal and background. The scale of the jet energy is calibrated using additional templates formed with the invariant mass of pairs of jets. These templates form an overall likelihood function that depends on the top quark mass and on the jet energy scale (JES). We estimate both by maximizing this function. Given 72 observed events, we measure a top quark mass of 171.1 {+-} 3.7 (stat.+JES) {+-} 2.1 (syst.) GeV/c{sup 2}. The combined uncertainty on the top quark mass is 4.3 GeV/c{sup 2}.

  8. Unabridged Analysis of Human Histone H3 by Differential Top-Down Mass Spectrometry Reveals Hypermethylated Proteoforms from MMSET/NSD2 Overexpression.

    PubMed

    Zheng, Yupeng; Fornelli, Luca; Compton, Philip D; Sharma, Seema; Canterbury, Jesse; Mullen, Christopher; Zabrouskov, Vlad; Fellers, Ryan T; Thomas, Paul M; Licht, Jonathan D; Senko, Michael W; Kelleher, Neil L

    2016-03-01

    Histones, and their modifications, are critical components of cellular programming and epigenetic inheritance. Recently, cancer genome sequencing has uncovered driver mutations in chromatin modifying enzymes spurring high interest how such mutations change histone modification patterns. Here, we applied Top-Down mass spectrometry for the characterization of combinatorial modifications (i.e. methylation and acetylation) on full length histone H3 from human cell lines derived from multiple myeloma patients with overexpression of the histone methyltransferase MMSET as the result of a t(4;14) chromosomal translocation. Using the latest in Orbitrap-based technology for clean isolation of isobaric proteoforms containing up to 10 methylations and/or up to two acetylations, we provide extensive characterization of histone H3.1 and H3.3 proteoforms. Differential analysis of modifications by electron-based dissociation recapitulated antagonistic crosstalk between K27 and K36 methylation in H3.1, validating that full-length histone H3 (15 kDa) can be analyzed with site-specific assignments for multiple modifications. It also revealed K36 methylation in H3.3 was affected less by the overexpression of MMSET because of its higher methylation levels in control cells. The co-occurrence of acetylation with a minimum of three methyl groups in H3K9 and H3K27 suggested a hierarchy in the addition of certain modifications. Comparative analysis showed that high levels of MMSET in the myeloma-like cells drove the formation of hypermethyled proteoforms containing H3K36me2 co-existent with the repressive marks H3K9me2/3 and H3K27me2/3. Unique histone proteoforms with such "trivalent hypermethylation" (K9me2/3-K27me2/3-K36me2) were not discovered when H3.1 peptides were analyzed by Bottom-Up. Such disease-correlated proteoforms could link tightly to aberrant transcription programs driving cellular proliferation, and their precise description demonstrates that Top-Down mass spectrometry can

  9. An algorithm for quantum mechanical finite-nuclear-mass variational calculations of atoms with L = 3 using all-electron explicitly correlated Gaussian basis functions.

    PubMed

    Sharkey, Keeper L; Kirnosov, Nikita; Adamowicz, Ludwik

    2013-03-14

    A new algorithm for quantum-mechanical nonrelativistic calculation of the Hamiltonian matrix elements with all-electron explicitly correlated Gaussian functions for atoms with an arbitrary number of s electrons and with three p electrons, or one p electron and one d electron, or one f electron is developed and implemented. In particular the implementation concerns atomic states with L = 3 and M = 0. The Hamiltonian used in the approach is obtained by rigorously separating the center-of-mass motion from the laboratory-frame all particle Hamiltonian, and thus it explicitly depends on the finite mass of the nucleus. The approach is employed to perform test calculations on the lowest (2)F state of the two main isotopes of the lithium atom, (7)Li and (6)Li. PMID:23514465

  10. Simultaneous determination of 15 top-prescribed pharmaceuticals and their metabolites in influent wastewater by reversed-phase liquid chromatography coupled to tandem mass spectrometry.

    PubMed

    Tarcomnicu, Isabela; van Nuijs, Alexander L N; Simons, Ward; Bervoets, Lieven; Blust, Ronny; Jorens, Philippe G; Neels, Hugo; Covaci, Adrian

    2011-01-15

    A fast and sensitive high performance reversed-phase liquid chromatography-tandem mass spectrometry method was developed and validated for the analysis of 15 prescription pharmaceuticals and four of their metabolites in influent wastewater. The selected pharmaceuticals belonged to various classes, such as angiotensin converting enzyme inhibitors, angiotensin receptor antagonists, calcium antagonists, β-blockers, antidepressants, analgetics, anticonvulsants, platelet antiaggregants, and cholesterol lowering agents. They were selected from the list of top-sold prescription pharmaceuticals in Belgium. The chromatographic separation was optimized in order to achieve suitable retention times, good resolution for analytes susceptible of mass spectrometric cross-talk and high sensitivity in one single run. All compounds eluted within 9 min on a Phenomenex Kinetex C18 column, based on a newly developed technology that allows a very narrow distribution of the core-shell particles, providing high separation efficiency. Sample preparation was executed with solid-phase extraction on Oasis MCX cartridges. The method was validated by assessing specificity, selectivity, lower limit of quantification (LLOQ), linearity, accuracy, precision, extraction recovery, and matrix effects following Food and Drug Administration guidelines. The method LLOQs ranged from 0.5 to 25 ng/L. Calibration curves and LLOQs were designed to provide a good analytical performance at concentrations expected in real influent wastewater samples for each target compound. Eight deuterated analogues were used as internal standards for quantification. The method was applied to influent wastewater samples collected from 17 different wastewater treatment plants throughout Belgium. Most of the analytes were measured in the samples at concentrations above LLOQ. Seven of the compounds were for the first time reported in influent wastewater. The newly developed analytical method is currently used to assess

  11. Predictions for the top-quark forward-backward asymmetry at high invariant pair mass using the principle of maximum conformality

    DOE PAGESBeta

    Wang, Sheng -Quan; Wu, Xing -Gang; Si, Zong -Guo; Brodsky, Stanley J.

    2016-01-07

    In this study, the D0 collaboration at FermiLab has recently measured the top-quark pair forward-backward asymmetry inmore » $$\\bar{p}p$$ → $$t\\bar{t}$$X reactions as a function of the $$t\\bar{t}$$ invariant mass M$$t\\bar{t}$$. The D0 result for AFB(M$$t\\bar{t}$$ > 650 GeV) is smaller than AFB(M$$t\\bar{t}$$) obtained for small values of M$$t\\bar{t}$$, which may indicate an “increasing-decreasing” behavior for AFB(M$$t\\bar{t}$$ > Mcut). This behavior is not explained using conventional renormalization scale setting, or even by a next-to-next-to-leading order (N2LO) QCD calculation—one predicts a monotonically increasing behavior. In the conventional scale-setting method, one simply guesses a single renormalization scale μr for the argument of the QCD running coupling and then varies it over an arbitrary range. However, the conventional method has inherent difficulties.« less

  12. Top-down proteomic identification of Shiga toxin 2 subtypes from Shiga toxin-producing Escherichia coli by Matrix-Assisted Laser Desorption Ionization-Tandem Time of Flight mass spectrometry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We have analyzed 26 Shiga toxin-producing Escherichia coli (STEC) strains for Shiga toxin 2 (Stx2) production using matrix-assisted laser desorption/ionization time-of-flight-time-of-flight tandem mass spectrometry (MALDI-TOF-TOF-MS/MS) and top-down proteomic analysis. STEC strains were induced to ...

  13. LHC limits on the top-Higgs in models with strong top-quark dynamics

    SciTech Connect

    Chivukula, R. Sekhar; Simmons, Elizabeth H.; Coleppa, Baradhwaj; Logan, Heather E.; Martin, Adam

    2011-11-01

    LHC searches for the standard model Higgs boson in WW or ZZ decay modes place strong constraints on the top-Higgs state predicted in many models with new dynamics preferentially affecting top quarks. Such a state couples strongly to top quarks, and is therefore produced through gluon fusion at a rate enhanced relative to the rate for the standard model Higgs boson. A top-Higgs state with mass less than 300 GeV is excluded at 95% C.L. if the associated top-pion has a mass of 150 GeV, and the constraint is even stronger if the mass of the top-pion state exceeds the top-quark mass or if the top-pion decay constant is a substantial fraction of the weak scale. These results have significant implications for theories with strong top dynamics, such as topcolor-assisted technicolor, top-seesaw models, and certain Higgsless models.

  14. Predictions for the top-quark forward-backward asymmetry at high invariant pair mass using the principle of maximum conformality

    NASA Astrophysics Data System (ADS)

    Wang, Sheng-Quan; Wu, Xing-Gang; Si, Zong-Guo; Brodsky, Stanley J.

    2016-01-01

    The D0 collaboration at FermiLab has recently measured the top-quark pair forward-backward asymmetry in p ¯p →t t ¯X reactions as a function of the t t ¯ invariant mass Mt t ¯. The D0 result for AFB(Mt t ¯>650 GeV ) is smaller than AFB(Mt t ¯) obtained for small values of Mt t ¯, which may indicate an "increasing-decreasing" behavior for AFB(Mt t ¯>Mcut) . This behavior is not explained using conventional renormalization scale setting, or even by a next-to-next-to-leading order (N2LO ) QCD calculation—one predicts a monotonically increasing behavior. In the conventional scale-setting method, one simply guesses a single renormalization scale μr for the argument of the QCD running coupling and then varies it over an arbitrary range. However, the conventional method has inherent difficulties. For example, the resulting perturbative quantum chromodynamics (pQCD) predictions depend on the choice of renormalization scheme, in contradiction to the principle of "renormalization scheme invariance"—predictions for physical observables cannot depend on a theoretical convention. The error estimate obtained by varying μr is unreliable since it is only sensitive to perturbative contributions involving the pQCD β -function. Worse, guessing the renormalization scale gives predictions for precision QED observables which are in contradiction to results obtained using the standard Gell-Mann-Low method. In contrast, if one fixes the scale using the principle of maximum conformality (PMC), the resulting pQCD predictions are renormalization-scheme independent since all of the scheme-dependent {βi}-terms in the QCD perturbative series are resummed into the QCD running couplings at each order. The {βi}-terms at each order can be unambiguously identified using renormalization group methods such as the Rδ method. The PMC then determines the renormalization scales of the running coupling at each order and provides unambiguous scale-fixed and scheme-independent predictions

  15. Determination of the top-quark pole mass and strong coupling constant from the t t-bar production cross section in pp collisions at $$\\sqrt{s}$$ = 7 TeV

    DOE PAGESBeta

    Chatrchyan, Serguei

    2014-08-21

    The inclusive cross section for top-quark pair production measured by the CMS experiment in proton-proton collisions at a center-of-mass energy of 7 TeV is compared to the QCD prediction at next-to-next-to-leading order with various parton distribution functions to determine the top-quark pole mass,more » $$m_t^{pole}$$, or the strong coupling constant, $$\\alpha_S$$. With the parton distribution function set NNPDF2.3, a pole mass of 176.7$$^{+3.0}_{-2.8}$$ GeV is obtained when constraining $$\\alpha_S$$ at the scale of the Z boson mass, $m_Z$, to the current world average. Alternatively, by constraining $$m_t^{pole}$$ to the latest average from direct mass measurements, a value of $$\\alpha_S(m_Z)$$ = 0.1151$$^{+0.0028}_{-0.0027}$$ is extracted. This is the first determination of $$\\alpha_S$$ using events from top-quark production.« less

  16. Determination of the top-quark pole mass and strong coupling constant from the t t-bar production cross section in pp collisions at $\\sqrt{s}$ = 7 TeV

    SciTech Connect

    Chatrchyan, Serguei

    2014-08-21

    The inclusive cross section for top-quark pair production measured by the CMS experiment in proton-proton collisions at a center-of-mass energy of 7 TeV is compared to the QCD prediction at next-to-next-to-leading order with various parton distribution functions to determine the top-quark pole mass, $m_t^{pole}$, or the strong coupling constant, $\\alpha_S$. With the parton distribution function set NNPDF2.3, a pole mass of 176.7$^{+3.0}_{-2.8}$ GeV is obtained when constraining $\\alpha_S$ at the scale of the Z boson mass, $m_Z$, to the current world average. Alternatively, by constraining $m_t^{pole}$ to the latest average from direct mass measurements, a value of $\\alpha_S(m_Z)$ = 0.1151$^{+0.0028}_{-0.0027}$ is extracted. This is the first determination of $\\alpha_S$ using events from top-quark production.

  17. Architectural Tops

    ERIC Educational Resources Information Center

    Mahoney, Ellen

    2010-01-01

    The development of the skyscraper is an American story that combines architectural history, economic power, and technological achievement. Each city in the United States can be identified by the profile of its buildings. The design of the tops of skyscrapers was the inspiration for the students in the author's high-school ceramic class to develop…

  18. Finite element analysis of maxillary incisor displacement during en-masse retraction according to orthodontic mini-implant position

    PubMed Central

    Song, Jae-Won; Lim, Joong-Ki; Lee, Kee-Joon; Sung, Sang-Jin; Chun, Youn-Sic

    2016-01-01

    Objective Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion. PMID:27478801

  19. Top quark production at the Tevatron

    SciTech Connect

    Varnes, Erich W.; /Arizona U.

    2010-09-01

    The Fermilab Tevatron has, until recently, been the only accelerator with sufficient energy to produce top quarks. The CDF and D0 experiments have collected large samples of top quarks. We report on recent top quark production measurements of the single top and t{bar t} production cross sections, as well as studies of the t{bar t} invariant mass distribution and a search for highly boosted top quarks.

  20. Status of the top quark: Top production cross section and top properties

    SciTech Connect

    Boisvert, V.; /Rochester U.

    2006-08-01

    This report describes the latest cross section and property measurements associated with the top quark at the Tevatron Run II. The largest data sample used is 760 pb{sup -1} of integrated luminosity. Due to its large mass, the top quark might be involved in the process of electroweak symmetry breaking, making it a useful probe for signs of new physics.

  1. Top-ophilia

    SciTech Connect

    Quigg, Chris; /Fermilab

    2008-01-01

    Almost from the moment in June 1977 when the discovery of the Upsilon resonance revealed the existence of what we now call the bottom quark, physicists began searching for its partner. Through the years, as we established the electric charge and weak isospin of the b-quark, and detected the virtual influence of its mate, it became clear that the top quark must exist. Exactly at what mass, we couldn't say, but we knew just how top events would look. We also knew that top events would be rare--if the Tevatron could make them at all--and that picking out the events would pose a real challenge for the experimenters and their detectors.

  2. Measurement of the top quark mass in the tt¯→ lepton+jets and tt¯→ dilepton channels using √s = 7   TeV ATLAS data

    SciTech Connect

    Aad, G.

    2015-07-17

    The top quark mass was measured in the channels tt¯→ lepton+jets and tt¯→ dilepton (lepton = e,μ) based on ATLAS data recorded in 2011. The data were taken at the LHC with a proton–proton centre-of-mass energy of √s = 7 TeV and correspond to an integrated luminosity of 4.6 fb–1. The tt¯→ lepton+jets analysis uses a three-dimensional template technique which determines the top quark mass together with a global jet energy scale factor (JSF), and a relative b-to-light-jet energy scale factor (bJSF), where the terms b-jets and light-jets refer to jets originating from b-quarks and u, d, c, s-quarks or gluons, respectively. The analysis of the tt¯→ dilepton channel exploits a one-dimensional template method using the mℓb observable, defined as the average invariant mass of the two lepton+b-jet pairs in each event. The top quark mass is measured to be 172.33 ± 0.75 (stat + JSF + bJSF) ± 1.02(syst) GeV, and 173.79 ± 0.54(stat) ± 1.30(syst) GeV in the tt¯→ lepton+jets and tt¯→ dilepton channels, respectively. Thus, the combination of the two results yields mtop = 172.99 ± 0.48(stat) ± 0.78(syst) GeV, with a total uncertainty of 0.91 GeV.

  3. Top quark properties and single top at CMS

    NASA Astrophysics Data System (ADS)

    Skovpenon, K.; CMS Collaboration

    2016-07-01

    Measurements of top-quark properties as well as single top-quark production are presented, obtained from the CMS data collected in 2011 and 2012 at centre-of-mass energies of 7 and 8TeV. The results include measurements of the top pair charge asymmetry, the W helicity in top decays, the t bar{{t}} spin correlation and the search for anomalous couplings. The cross sections for the electroweak production of single top quarks in the t-channel and in association with W-bosons are measured and the results are used to place constraints on the CKM matrix element Vtb. In the t-channel the ratio of top and antitop production cross sections is determined and compared with predictions from different parton density distribution functions. The results are compared with predictions from the standard model as well as new physics models.

  4. Implicit and explicit schemes for mass consistency preservation in hybrid particle/finite-volume algorithms for turbulent reactive flows

    SciTech Connect

    Popov, Pavel P. Pope, Stephen B.

    2014-01-15

    This work addresses the issue of particle mass consistency in Large Eddy Simulation/Probability Density Function (LES/PDF) methods for turbulent reactive flows. Numerical schemes for the implicit and explicit enforcement of particle mass consistency (PMC) are introduced, and their performance is examined in a representative LES/PDF application, namely the Sandia–Sydney Bluff-Body flame HM1. A new combination of interpolation schemes for velocity and scalar fields is found to better satisfy PMC than multilinear and fourth-order Lagrangian interpolation. A second-order accurate time-stepping scheme for stochastic differential equations (SDE) is found to improve PMC relative to Euler time stepping, which is the first time that a second-order scheme is found to be beneficial, when compared to a first-order scheme, in an LES/PDF application. An explicit corrective velocity scheme for PMC enforcement is introduced, and its parameters optimized to enforce a specified PMC criterion with minimal corrective velocity magnitudes.

  5. Summary of the Models and Methods for the FEHM Application-A Finite-Element Heat- and Mass-Transfer Code

    SciTech Connect

    George A. Zyvoloski; Bruce A. Robinson; Zora V. Dash; Lynn L. Trease

    1997-07-01

    The mathematical models and numerical methods employed by the FEHM application, a finite-element heat- and mass-transfer computer code that can simulate nonisothermal multiphase multi-component flow in porous media, are described. The use of this code is applicable to natural-state studies of geothermal systems and groundwater flow. A primary use of the FEHM application will be to assist in the understanding of flow fields and mass transport in the saturated and unsaturated zones below the proposed Yucca Mountain nuclear waste repository in Nevada. The component models of FEHM are discussed. The first major component, Flow- and Energy-Transport Equations, deals with heat conduction; heat and mass transfer with pressure- and temperature-dependent properties, relative permeabilities and capillary pressures; isothermal air-water transport; and heat and mass transfer with noncondensible gas. The second component, Dual-Porosity and Double-Porosity/Double-Permeability Formulation, is designed for problems dominated by fracture flow. Another component, The Solute-Transport Models, includes both a reactive-transport model that simulates transport of multiple solutes with chemical reaction and a particle-tracking model. Finally, the component, Constitutive Relationships, deals with pressure- and temperature-dependent fluid/air/gas properties, relative permeabilities and capillary pressures, stress dependencies, and reactive and sorbing solutes. Each of these components is discussed in detail, including purpose, assumptions and limitations, derivation, applications, numerical method type, derivation of numerical model, location in the FEHM code flow, numerical stability and accuracy, and alternative approaches to modeling the component.

  6. Top physics results from CDF

    SciTech Connect

    Gomez, Gervasio; /Cantabria Inst. of Phys.

    2005-05-01

    The top quark is by far the most massive fundamental particle observed so far, and the study of its properties is interesting for several reasons ranging from its possible special role in electroweak symmetry breaking to its sensitivity to physics beyond the Standard Model. They present recent top physics results from CDF based on 160-320 pb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV. The t{bar t} cross section and the top mass have been measured in different decay channels and using different methods. they have searched for evidence of single top production, setting upper limits on its production rate. Other results shown in this conference include studies of the polarization of W bosons from top decays, a search for charged Higgs decaying from top, and a search for additional heavy t' quarks.

  7. The Effects of Variable Mass and Geometry, Pretwist, Shear Deformation and Rotatory Inertia on the Resonant Frequencies of Intact Long Bones: A Finite Element Model Analysis

    NASA Technical Reports Server (NTRS)

    Young, Donald R.; Orne, David

    1976-01-01

    The influence of pretwist, nonuniformities in mass and flexural stiffness, rotatory inertia and shear deformation on the natural frequencies of intact bones is evaluated by means of a linear elastic, finite-element model which has been programmed for solution on the digital computer. Theoretical results are compared to the results on the forced vibration of intact canine radii obtained experimentally by Thompson. Surprisingly, inclusion of fairly large pretwist angles (from -14 to 12 deg for one specimen) had little affect on the first three frequencies of transverse vibration in either the cranial or lateral directions. Inclusion of shear deformation reduced the third-mode frequency in the stiffest (lateral) direction by about six percent, otherwise shear deformation played a minor role in determining natural frequencies. Similarly. rotatory inertia had negligible influence up to the third natural frequency. The predominant influence on the first three natural frequencies of transverse vibration could be attributed to the variations in mass and flexural stiffness along the length of the test specimens. Different effective moduli of elasticity are required to yield correct absolute values for the frequencies which correspond to experimental findings. thus implying the presence of some inhomogeneities in material properties around the bone cross-section and/or along its length.

  8. Mass

    SciTech Connect

    Chris Quigg

    2007-12-05

    In the classical physics we inherited from Isaac Newton, mass does not arise, it simply is. The mass of a classical object is the sum of the masses of its parts. Albert Einstein showed that the mass of a body is a measure of its energy content, inviting us to consider the origins of mass. The protons we accelerate at Fermilab are prime examples of Einsteinian matter: nearly all of their mass arises from stored energy. Missing mass led to the discovery of the noble gases, and a new form of missing mass leads us to the notion of dark matter. Starting with a brief guided tour of the meanings of mass, the colloquium will explore the multiple origins of mass. We will see how far we have come toward understanding mass, and survey the issues that guide our research today.

  9. Progress in Top Quark Physics

    SciTech Connect

    Thomson, Evelyn J.

    2006-07-11

    Experimental measurements of the properties of the top quark have improved and will continue to improve significantly, with the excellent operation of the CDF and D0 experiments and the Tevatron pp-bar collider at the Fermi National Accelerator Laboratory. All of the final state experimental signatures from top quark production and decay are being analysed to test if this most massive quark is sensitive to new physics beyond the standard model. So far, observations are consistent with the standard model. New techniques have dramatically improved the precision of the top quark mass measurement to 1.7% and set the stage for a sub-1% measurement by 2008. This improved knowledge of the top quark mass sharpens the standard model prediction for the mass of the undiscovered Higgs boson, with implications for Higgs studies at the future LHC and ILC.

  10. Progress in top quark physics

    SciTech Connect

    Thomson, Evelyn J.; /Pennsylvania U.

    2006-02-01

    Experimental measurements of the properties of the top quark have improved and will continue to improve significantly, with the excellent operation of the CDF and D0 experiments and the Tevatron p{bar p} collider at the Fermi National Accelerator Laboratory. All of the final state experimental signatures from top quark production and decay are being analyzed to test if this most massive quark is sensitive to new physics beyond the standard model. So far, observations are consistent with the standard model. New techniques have dramatically improved the precision of the top quark mass measurement to 1.7% and set the stage for a sub-1% measurement by 2008. This improved knowledge of the top quark mass sharpens the standard model prediction for the mass of the undiscovered Higgs boson, with implications for Higgs studies at the future LHC and ILC.

  11. Contact metamorphism surrounding the Alta stock: Finite element model simulation of heat- and {sup 18}O/{sup 16}O mass-transport during prograde metamorphism

    SciTech Connect

    Cook, S.J.; Bowman, J.R.; Forster, C.B.

    1997-01-01

    Results of calcite-dolomite geothermometry and oxygen isotope studies of marbles in the southern portion of the contact aureole surrounding the Alta stock (Utah) provide evidence for extensive hydrothermal metamorphism in this part of the aureole. Simulation of these two independent data sets with two-dimensional, finite element fluid flow and heat transport models constrains the pattern of fluid flow, minimum permeability, and the permeability structure in this part of the aureole. Model results demonstrate that intrusion of the stock into a homogeneous, isotropic permeability medium yields peak metamorphic temperatures significantly lower than those measured in the marbles and significant {sup 18}O depletions both above and below the Alta-Grizzly thrust system. The latter contradicts the observations in the south aureole that {sup 18}O depletions in the marbles are restricted to marbles below the Alta-Grizzly thrust; dolomitic marbles above the thrust retain original sedimentary values up to the intrusive contact. Models with horizontal permeability barriers above the Alta-Grizzly thrust and extending over the top of the Alta stock are capable of reproducing the observed thermal and {delta}{sup 18}O profiles in the southern aureole. The presence of such horizontal barriers reduces the predominantly vertical fluid flow and heat transfer that would occur in a homogeneous and isotropic permeability medium, forcing fluid flow and heat transfer laterally away from the upper flanks of the stock. Such horizontal flow patterns are necessary to produce significant {sup 18}O depletion above the thrust, and to provide the necessary lateral heat transfer to duplicate the observed temperature profile. Best fit model results to the observed thermal and {delta}{sup 18}O profiles provide several new insights into the dynamics of fluid circulation and hydrogeologic characteristics of the southern Alta aureole during prograde metamorphism.

  12. Measurement of the front back asymmetry in top-antitop quark pairs produced in proton-antiproton collisions at center of mass energy = 1.96 TeV

    SciTech Connect

    Schwarz, Thomas A.; /Michigan U.

    2006-01-01

    Quarks, along with leptons and force carrying particles, are predicted by the Standard Model to be the fundamental constituents of nature. In distinction from the leptons, the quarks interact strongly through the chromodynamic force and are bound together within the hadrons. The familiar proton and neutron are bound states of the light ''up'' and ''down'' quarks. The most massive quark by far, the ''top'' quark, was discovered by the CDF and D0 experiments in March, 1995. The new quark was observed in p{bar p} collisions at 1.8 TeV at the Fermilab Tevatron. The mass of the top quark was measured to be 176 {+-} 13 GeV/c{sup 2} and the cross section 6.8{sub -2.4}{sup +3.6} pb. It is the Q = 2/3, T{sub 3} = +1/2 member of the third generation weak-isospin doublet along with the bottom quark. The top quark is the final Standard Model quark to be discovered. Along with whatever is responsible for electroweak symmetry breaking, top quark physics is considered one of the least understood sectors of the Standard Model and represents a front line of our understanding of particle physics. Currently, the only direct measurements of top quark properties come from the CDF and D0 experiments observing p{bar p} collisions at the Tevatron. Top quark production at the Tevatron is almost exclusively by quark-antiquark annihilation, q{bar q} {yields} t{bar t} (85%), and gluon fusion, gg {yields} t{bar t} (15%), mediated by the strong force. The theoretical cross-section for this process is {sigma}{sub t{bar t}} = 6.7 {+-} 0.8 pb for m{sub t} = 175 GeV/c{sup 2}. Top quarks can also be produced at the Tevatron via q{bar b}{prime} {yields} tb and qg {yields} q{prime}tb through the weak interaction. The cross section for these processes is lower (3pb) and the signal is much more difficult to isolate as backgrounds are much higher. The top quark is predicted to decay almost exclusively into a W-boson and a bottom quark (t {yields} Wb). The total decay width t {yields} Wb is {Lambda} = 1

  13. Measurement of the top quark mass in the tt¯→ lepton+jets and tt¯→ dilepton channels using √s = 7   TeV ATLAS data

    DOE PAGESBeta

    Aad, G.

    2015-07-17

    The top quark mass was measured in the channels tt¯→ lepton+jets and tt¯→ dilepton (lepton = e,μ) based on ATLAS data recorded in 2011. The data were taken at the LHC with a proton–proton centre-of-mass energy of √s = 7 TeV and correspond to an integrated luminosity of 4.6 fb–1. The tt¯→ lepton+jets analysis uses a three-dimensional template technique which determines the top quark mass together with a global jet energy scale factor (JSF), and a relative b-to-light-jet energy scale factor (bJSF), where the terms b-jets and light-jets refer to jets originating from b-quarks and u, d, c, s-quarks ormore » gluons, respectively. The analysis of the tt¯→ dilepton channel exploits a one-dimensional template method using the mℓb observable, defined as the average invariant mass of the two lepton+b-jet pairs in each event. The top quark mass is measured to be 172.33 ± 0.75 (stat + JSF + bJSF) ± 1.02(syst) GeV, and 173.79 ± 0.54(stat) ± 1.30(syst) GeV in the tt¯→ lepton+jets and tt¯→ dilepton channels, respectively. Thus, the combination of the two results yields mtop = 172.99 ± 0.48(stat) ± 0.78(syst) GeV, with a total uncertainty of 0.91 GeV.« less

  14. Top quark studies at hadron colliders

    SciTech Connect

    Sinervo, P.K.; CDF Collaboration

    1996-08-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag {ital b} quark jets in candidate events. The most recent measurements of top quark properties by the CDF and D{null} collaborations are reviewed, including the top quark cross section, mass, branching fractions and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented.

  15. Top quark studies at hadron colliders

    SciTech Connect

    Sinervo, P.K.

    1997-01-01

    The techniques used to study top quarks at hadron colliders are presented. The analyses that discovered the top quark are described, with emphasis on the techniques used to tag b quark jets in candidate events. The most recent measurements of top quark properties by the CDF and DO Collaborations are reviewed, including the top quark cross section, mass, branching fractions, and production properties. Future top quark studies at hadron colliders are discussed, and predictions for event yields and uncertainties in the measurements of top quark properties are presented.

  16. On Improving Accuracy of Finite-Element Solutions of the Effective-Mass Schrödinger Equation for Interdiffused Quantum Wells and Quantum Wires

    NASA Astrophysics Data System (ADS)

    Topalović, D. B.; Arsoski, V. V.; Pavlović, S.; Čukarić, N. A.; Tadić, M. Ž.; Peeters, F. M.

    2016-01-01

    We use the Galerkin approach and the finite-element method to numerically solve the effective-mass Schrödinger equation. The accuracy of the solution is explored as it varies with the range of the numerical domain. The model potentials are those of interdiffused semiconductor quantum wells and axially symmetric quantum wires. Also, the model of a linear harmonic oscillator is considered for comparison reasons. It is demonstrated that the absolute error of the electron ground state energy level exhibits a minimum at a certain domain range, which is thus considered to be optimal. This range is found to depend on the number of mesh nodes N approximately as α0 logeα1(α2N), where the values of the constants α0, α1, and α2 are determined by fitting the numerical data. And the optimal range is found to be a weak function of the diffusion length. Moreover, it was demonstrated that a domain range adaptation to the optimal value leads to substantial improvement of accuracy of the solution of the Schrödinger equation. Supported by the Ministry of Education, Science, and Technological Development of Serbia and the Flemish fund for Scientific Research (FWO Vlaanderen)

  17. Heavy flavour physics from top to bottom

    SciTech Connect

    Paulini, M.; CDF and D0 Collaboration

    1998-02-01

    We review the status of heavy flavour physics at the Fermilab Tevatron collider by summarizing recent top quark and B physics results from CDF and D0. In particular we discuss the measurement of the top quark mass and top production cross section as well as B meson lifetimes and time dependent B{anti B} mixing results. An outlook of perspectives for top and B physics in Run II starting in 1999 is also given.

  18. Heavy flavour physics from top to bottom

    SciTech Connect

    Paulini, M.; CDF and D0 Collaborations

    1997-01-01

    We review the status of heavy flavour physics at the Fermilab Tevatron collider by summarizing recent top quark and B physics results from CDF and D0. In particular we discuss the measurement of the top quark mass and top production cross section as well as B meson lifetimes and time dependent B{bar B} mixing results. An outlook of perspectives for top and B physics in Run II starting in 1999 is also given. 38 refs., 23 figs., 8 tabs.

  19. Measurement of the p anti-p ---> t anti-t production cross- section and the top quark mass at s**(1/2) = 1.96-TeV in the all-hadronic decay mode

    SciTech Connect

    Aaltonen, T.; Abulencia, A.; Adelman, J.; Affolder, Anthony Allen; Akimoto, T.; Albrow, Michael G.; Amerio, S.; Amidei, Dante E.; Anastassov, A.; Anikeev, K.; Annovi, A.; /Fermilab /Frascati /Comenius U.

    2007-06-01

    We report the measurements of the t{bar t} production cross section and of the top quark mass using 1.02 fb{sup -1} of p{bar p} data collected with the CDF II detector at the Fermilab Tevatron. We select events with six or more jets on which a number of kinematical requirements are imposed by means of a neural network algorithm. At least one of these jets must be identified as initiated by a b-quark candidate by the reconstruction of a secondary vertex. The cross section is measured to be {sigma}{sub t{bar t}} = 8.3 {+-} 1.0(stat. ){sup +2.0}{sub -1.5}(syst.) {+-} 0.5(lumi.) pb, which is consistent with the standard model prediction. The top quark mass of 174.0 {+-} 2.2(stat.){+-}4.8(syst.) GeV/c{sup 2} is derived from a likelihood fit incorporating reconstructed mass distributions representative of signal and background.

  20. Rapid Identification of E. coli O157:H7 by "Top-Down" Proteomics Using MALDI-TOF/TOF Mass Spectrometry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This abstract was presented as an oral presentation on June 2nd 2009 at the 57th American Society of Mass Spectrometry Conference (May 31-June 4, 2009, Philadelphia, PA). Rapid identification of bacterial microorganisms is of importance for food safety and security. Mass spectrometry is at the for...

  1. The twisted top

    NASA Astrophysics Data System (ADS)

    Thiffeault, Jean-Luc; Morrison, P. J.

    2001-05-01

    We describe a new type of top, the twisted top, obtained by appending a cocycle to the Lie-Poisson bracket for the charged heavy top, thus breaking its semidirect product structure. The twisted top has an integrable case that corresponds to the Lagrange (symmetric) top. We give a canonical description of the twisted top in terms of Euler angles. We also show by a numerical calculation of the largest Lyapunov exponent that the Kovalevskaya case of the twisted top is chaotic.

  2. Measurement of Top Quark-Antitop Quark Helicity Fractions and Spin Correlation in Proton-Antiproton Collisions at Center of Mass Energy = TeV

    NASA Astrophysics Data System (ADS)

    Mietlicki, David John

    In the production of top-antitop quark pairs during pp¯ collisions, the spins of the t and t¯ are correlated. This correlation is quantified by the spin correlation coefficient kappa or the fraction of top quarks produced with opposite helicity FOH, which are determined by the QCD interaction mechanism that produces tt¯ pairs. A deviation of the correlation from the predicted value could be an indication of new production mechanisms. We describe a measurement of the tt¯ spin correlation using the lepton plus jets decay channel, where the decay proceeds via tt¯ → W+bW -b¯ → (qq¯'b) (ℓnuℓb¯) or (ℓnuℓb)( qq¯'b¯), in data corresponding to 4.3 fb-1 of integrated luminosity collected with t he CDF detector. In the helicity basis, we find an opposite helicity fraction FOH = 0.80 +/- 0.25stat +/- 0.08 syst and a spin correlation coefficient kappa = 0.60 +/- 0.50stat +/- 0.16 syst, which are in good agreement with the theoretical predictions FOH = 0.70 and kappa = 0.40.

  3. Top quark physics at the LHC

    NASA Astrophysics Data System (ADS)

    Kim, Tae Jeong

    2014-04-01

    In 2011, an integrated luminosity of more than 5 fb-1 at 7 TeV has been delivered by the LHC. The measurement of the cross section in top quark pair production and in single top quark production, top quark mass, top quark properties and new physics searches in top quark decays have been performed at the CMS experiment with various integrated luminosities. An overview of the latest results of these measurements and searches by the time of ICFP 2012 conference will be presented.

  4. Top Quark Studies at D0

    SciTech Connect

    Peters, Reinhild Yvonne

    2014-11-26

    Years after its discovery in 1995 by CDF and D0, the top quark still undergoes intense investigations at the Tevatron. Using up to the full Run II data sample, new measurements of top quark production and properties by the D0 Collaboration are presented. In particular, the first observation of single top quark s-channel production, the measurement of differential tbar t distributions, forward-backward tbar t asymmetry, a new measurement of the top quark mass, and a measurement of the top quark charge are discussed.

  5. Measurements of top quark properties at CDF

    SciTech Connect

    Kraan, Aafke C.; /Pennsylvania U.

    2006-11-01

    The top quark with its mass of about 172 GeV/c{sup 2} is the most massive fundamental particle observed by experiment. In this talk they highlight the most recent measurements of several top quark properties performed with the CDF detector based on data samples corresponding to integrated luminosities up to 1 fb{sup -1}. These results include a search for top quark pair production via new massive resonances, measurements of the helicity of the W boson from top-quark decay, and a direct limit on the lifetime of the top quark.

  6. Trajectory correction propulsion for TOPS

    NASA Technical Reports Server (NTRS)

    Long, H. R.; Bjorklund, R. A.

    1972-01-01

    A blowdown-pressurized hydrazine propulsion system was selected to provide trajectory correction impulse for outer planet flyby spacecraft as the result of cost/mass/reliability tradeoff analyses. Present hydrazine component and system technology and component designs were evaluated for application to the Thermoelectric Outer Planet Spacecraft (TOPS); while general hydrazine technology was adequate, component design changes were deemed necessary for TOPS-type missions. A prototype hydrazine propulsion system was fabricated and fired nine times for a total of 1600 s to demonstrate the operation and performance of the TOPS propulsion configuration. A flight-weight trajectory correction propulsion subsystem (TCPS) was designed for the TOPS based on actual and estimated advanced components.

  7. Finite Earth

    NASA Astrophysics Data System (ADS)

    2015-10-01

    The world has agreed on 17 Sustainable Development Goals, to be adopted this week. This is great progress towards acknowledging that the planet's finite resources need to be managed carefully in the face of humanity's unlimited aspirations.

  8. Light 't Hooft top partners

    NASA Astrophysics Data System (ADS)

    Cacciapaglia, Giacomo; Parolini, Alberto

    2016-04-01

    Vectorlike quarks, usually dubbed top partners, are a common presence in composite Higgs models. Being composite objects, their mass is expected to be of the order of their inverse size, that is the condensation scale of the new strong interactions. Light top partners, while not being a generic prediction, are, however, often considered in phenomenological models. We suggest that their lightness may be due to the matching of global 't Hooft anomalies of the underlying theory. We check this mechanism in explicit models, showing that, in one case, composite fermions with the quantum numbers of the top quark obtain a mass which is controlled by a soft breaking term and can be made parametrically small.

  9. Wave Engine Topping Cycle Assessment

    NASA Technical Reports Server (NTRS)

    Welch, Gerard E.

    1996-01-01

    The performance benefits derived by topping a gas turbine engine with a wave engine are assessed. The wave engine is a wave rotor that produces shaft power by exploiting gas dynamic energy exchange and flow turning. The wave engine is added to the baseline turboshaft engine while keeping high-pressure-turbine inlet conditions, compressor pressure ratio, engine mass flow rate, and cooling flow fractions fixed. Related work has focused on topping with pressure-exchangers (i.e., wave rotors that provide pressure gain with zero net shaft power output); however, more energy can be added to a wave-engine-topped cycle leading to greater engine specific-power-enhancement The energy addition occurs at a lower pressure in the wave-engine-topped cycle; thus the specific-fuel-consumption-enhancement effected by ideal wave engine topping is slightly lower than that effected by ideal pressure-exchanger topping. At a component level, however, flow turning affords the wave engine a degree-of-freedom relative to the pressure-exchanger that enables a more efficient match with the baseline engine. In some cases, therefore, the SFC-enhancement by wave engine topping is greater than that by pressure-exchanger topping. An ideal wave-rotor-characteristic is used to identify key wave engine design parameters and to contrast the wave engine and pressure-exchanger topping approaches. An aerodynamic design procedure is described in which wave engine design-point performance levels are computed using a one-dimensional wave rotor model. Wave engines using various wave cycles are considered including two-port cycles with on-rotor combustion (valved-combustors) and reverse-flow and through-flow four-port cycles with heat addition in conventional burners. A through-flow wave cycle design with symmetric blading is used to assess engine performance benefits. The wave-engine-topped turboshaft engine produces 16% more power than does a pressure-exchanger-topped engine under the specified topping

  10. Heavy flavor production and top quark search at hadron colliders

    SciTech Connect

    Baer, H.A.

    1991-01-01

    We review heavy flavor production at hadron colliders, with an eye towards the physics of the top quark. Motivation for existence of top, and current status of top search are reviewed. The physics of event simulation at hadron colliders is reviewed. We discuss characteristics of top quark events at p{bar p} colliders that may aid in distinguishing the top quark signal from Standard Model backgrounds, and illustrate various cuts which may be useful for top discovery. Top physics at hadron supercolliders is commented upon, as well as top quark mass measurement techniques. 22 refs., 5 figs.

  11. "De-novo" amino acid sequence elucidation of protein G'e by combined "Top-Down" and "Bottom-Up" mass spectrometry

    NASA Astrophysics Data System (ADS)

    Yefremova, Yelena; Al-Majdoub, Mahmoud; Opuni, Kwabena F. M.; Koy, Cornelia; Cui, Weidong; Yan, Yuetian; Gross, Michael L.; Glocker, Michael O.

    2015-03-01

    Mass spectrometric de-novo sequencing was applied to review the amino acid sequence of a commercially available recombinant protein Ǵ with great scientific and economic importance. Substantial deviations to the published amino acid sequence (Uniprot Q54181) were found by the presence of 46 additional amino acids at the N-terminus, including a so-called "His-tag" as well as an N-terminal partial α- N-gluconoylation and α- N-phosphogluconoylation, respectively. The unexpected amino acid sequence of the commercial protein G' comprised 241 amino acids and resulted in a molecular mass of 25,998.9 ± 0.2 Da for the unmodified protein. Due to the higher mass that is caused by its extended amino acid sequence compared with the original protein G' (185 amino acids), we named this protein "protein G'e." By means of mass spectrometric peptide mapping, the suggested amino acid sequence, as well as the N-terminal partial α- N-gluconoylations, was confirmed with 100% sequence coverage. After the protein G'e sequence was determined, we were able to determine the expression vector pET-28b from Novagen with the Xho I restriction enzyme cleavage site as the best option that was used for cloning and expressing the recombinant protein G'e in E. coli. A dissociation constant ( K d ) value of 9.4 nM for protein G'e was determined thermophoretically, showing that the N-terminal flanking sequence extension did not cause significant changes in the binding affinity to immunoglobulins.

  12. "De-novo" amino acid sequence elucidation of protein G'e by combined "top-down" and "bottom-up" mass spectrometry.

    PubMed

    Yefremova, Yelena; Al-Majdoub, Mahmoud; Opuni, Kwabena F M; Koy, Cornelia; Cui, Weidong; Yan, Yuetian; Gross, Michael L; Glocker, Michael O

    2015-03-01

    Mass spectrometric de-novo sequencing was applied to review the amino acid sequence of a commercially available recombinant protein G´ with great scientific and economic importance. Substantial deviations to the published amino acid sequence (Uniprot Q54181) were found by the presence of 46 additional amino acids at the N-terminus, including a so-called "His-tag" as well as an N-terminal partial α-N-gluconoylation and α-N-phosphogluconoylation, respectively. The unexpected amino acid sequence of the commercial protein G' comprised 241 amino acids and resulted in a molecular mass of 25,998.9 ± 0.2 Da for the unmodified protein. Due to the higher mass that is caused by its extended amino acid sequence compared with the original protein G' (185 amino acids), we named this protein "protein G'e." By means of mass spectrometric peptide mapping, the suggested amino acid sequence, as well as the N-terminal partial α-N-gluconoylations, was confirmed with 100% sequence coverage. After the protein G'e sequence was determined, we were able to determine the expression vector pET-28b from Novagen with the Xho I restriction enzyme cleavage site as the best option that was used for cloning and expressing the recombinant protein G'e in E. coli. A dissociation constant (K(d)) value of 9.4 nM for protein G'e was determined thermophoretically, showing that the N-terminal flanking sequence extension did not cause significant changes in the binding affinity to immunoglobulins. PMID:25560987

  13. Top quark physics at the Tevatron

    SciTech Connect

    D. Gerdes

    2004-01-28

    Precision studies of the top quark are a prime goal of the Run II physics program at the Fermilab Tevatron. Since the start of Run II in early 2002, the CDF and D0 experiments have analyzed approximately 100 pb{sup -1} of data and have re-established the top quark signal. In this article the author summarizes recent measurements of the top production cross section and mass.

  14. Top physics at D0

    SciTech Connect

    Klima, B.; D0 Collaboration

    1995-09-01

    The D0 collaboration reports on the observation of the Standard Model top quark in p{anti p} collisions at {radical}s = 1.8 TeV at the Fermilab Tevatron. The authors have searched for t{anti t} production with an integrated luminosity of approximately 50 pb{sup {minus}1} in the dilepton and single-lepton decay channels, with and without tagging of b quark jets. They observe 17 events with an expected background of 3.8 {+-} 0.6 events. The probability for an upward fluctuation of the background to produce the observed signal is 2 {times} 10{sup {minus}6} (equivalent to 4.6 standard deviations). The kinematic properties of the excess events are consistent with top quark decay. They measure the top quark mass to be 199{sub {minus}21}{sup +19} (stat.) {sub {minus}21}{sup +14} (syst.) GeV/c{sup 2} and its production cross section to be 6.4 {+-} 2.2 pb. D0 also sees a hadronic W mass peak (W {yields} jj) in the t{bar t} data events. Preliminary results from multivariate analyses and from the t{bar t} data events. Preliminary results from multivariate analyses and from the t{bar t} {yields} all-jets channel are discussed. Preliminary determination of the top quark mass using dilepton events yields 145 {+-} 25 (stat.) {+-}20 (syst.) GeV/C{sup 2}.

  15. Odd top partners at the LHC

    NASA Astrophysics Data System (ADS)

    Anandakrishnan, Archana; Collins, Jack H.; Farina, Marco; Kuflik, Eric; Perelstein, Maxim

    2016-04-01

    LHC searches for fermionic top partners T focus on three decay topologies: T →b W , T →t Z , and T →t h . However, top partners may carry new conserved quantum numbers that forbid these decays. The simplest possibility is a conserved parity, under which the top partner is odd and all SM states are even. In this case, decays of top partners may involve new particle-odd scalars, leading to signal topologies more commonly associated with supersymmetry, either with or without R -parity conservation. We study a simplified model in which this possibility is realized, and estimate the bounds on the top partner mass in this model implied by LHC searches for supersymmetry. We find that the bounds can be significantly weaker than in the conventional top partner decay scenario. For example, if the new parity is exact, a 500 GeV top partner is allowed as long as the lightest parity-odd scalar mass is between 325 and 500 GeV. The lower allowed top partner mass reduces the need for fine-tuning in the Higgs mass parameter, compared to the conventional decay scenario. We also present an explicit model, the oddest little Higgs, which exhibits this phenomenology.

  16. Transport properties of asymmetric-top molecules.

    PubMed

    Dickinson, A S; Hellmann, R; Bich, E; Vogel, E

    2007-06-14

    Kinetic theory of gases is extended from linear molecules to asymmetric tops. The integration over the velocity of the centre of mass is carried out explicitly and the results are expressed in a form suitable for classical evaluation. These results can also be employed for spherical and symmetric tops. PMID:17538728

  17. Top quark physics

    SciTech Connect

    Menzione, A.

    1995-10-01

    Most of the material presented in this report, comes from contributions to the parallel session PL20 of this conference. We summarise the experimental results of direct production of Top quarks, coming from the CDF and C0 Collaborations at Fermilab, and compare these results to what one expects within current theoretical understanding. Particular attention is given to new results such as all hadronic modes of t{bar t} decay. As far as the mass is concerned, a comparison is made with precision measurements of related quantities, coming from LEP and other experiments. An attempt is made to look at the medium-term future and understand which variables and with what accuracy one can measure them with increased integrated luminosity.

  18. A Measurement of the production cross section of top-antitop pairs in proton-antiproton collisions at a center of mass of 1.96 TeV using secondary vertex b-tagging.

    SciTech Connect

    Bachacou, Henri

    2004-12-01

    A measurement of the t{bar t} pair production cross section is presented using 162 pb{sup -1} of data collected by the CDF experiment during Run II at the Tevatron. t{bar t} events in the lepton+jets channel are isolated by identifying electrons and muons, reconstructing jets and transverse missing energy, and identifying b jets with a secondary vertex tagging algorithm. The efficiency of the algorithm is measured in a control sample using a novel technique that is less dependent on the simulation. For a top quark mass of 175 GeV/c{sup 2}, a cross section of {sigma}{sub t{bar t}} = 5.6{sub -1.1}{sup +1.2}(stat.){sub -0.6}{sup +0.9}(syst.)pb is measured.

  19. Pharmacokinetics and metabolism study of firocoxib in camels after intravenous administration by using high-resolution bench-top orbitrap mass spectrometry.

    PubMed

    Wasfi, Ibrahim A; Saeed, Hanan M; Agha, B A; Kamel, Asmaa M; Al Biriki, Nasreen A; Al Neaimi, Khaled M; Al Ali, Waleed A; Sultan, Saeed Mahmoud

    2015-01-01

    In this study, we developed a high-resolution liquid chromatography mass spectrometry method for the pharmacokinetic study of firocoxib followed by full method validation. Following a solid-phase extraction, the firocoxib and internal standard (celecoxib) were separated on an Agilent Zorbax ZDB C18 column (50 mm × 2.1 mm i.d., 3.5 μm) with a gradient elution using methanol and 0.1% aqueous formic acid. Data acquisition was performed at 25,000 resolution with the automatic gain set to 1,000,000 and the maximum injection time of 100 ms. Data were acquired in full-scan mode over a mass range of 100-550 Da in positive electrospray mode. Linear calibration curves were obtained over the concentration ranges of 0.5-200 ng/mL and no interfering peaks were detected at the retention time of firocoxib and internal standard in blank camel plasma samples. The mean extraction recoveries of firocoxib at three concentrations of 5, 25 and 75 ng/mL ranged from 92 to 104%. Coefficient of variation of intra-day and inter-day precision were both <10%. The accuracy of the method ranged from 95 to 107%. The validated method was then successfully applied in evaluating the pharmacokinetics and metabolism of firocoxib in camels (Camelus dromedarus) (n=5) following intravenous (i.v.) administration of a dose of 0.1 mgkg/body weight. The results obtained (mean ± SD) were as follows: the terminal elimination half-life (t₁/₂β) was 5.75 ± 2.26 h, and total body clearance (ClT) was 354.1 ± 82.6 mL/kg/h. The volume of distribution at steady state (VSS) was 2344.4 ± 238.7 mL/kg. One metabolite of firocoxib was tentatively identified as desalkyl firocoxib (m/z 283). Firocoxib could be detected in plasma 3-5 days following i.v. administration in camels using a sensitive liquid chromatography high-resolution orbitrap mass spectrometry method. PMID:25463193

  20. Recent Results of Top Quark Physics from the Tevatron

    SciTech Connect

    Peters, R. Y.

    2015-07-09

    Twenty years after its discovery in 1995 by the CDF and D0 collaborations at the Tevatron proton-antiproton collider at Fermilab, the top quark still undergoes intensive studies at the Tevatron and the LHC at CERN. In this article, recent top quark physics results from CDF and D0 are reported. In particular, measurements of single top quark and double top quark production, the $t\\bar{t}$ forward-backward asymmetry and the top quark mass are discussed.

  1. Study of the top reconstruction in top-partner events at the LHC

    SciTech Connect

    Takeuchi, Michihisa

    2008-11-23

    In the Littlest Higgs model with T-parity (LHT), top-partners (T{sub -}) are produced in pairs at the Large Hadron Collider (LHC). Each top-partner decays into a top quark (t) and the lightest T-odd gauge partner A{sub H}. We demonstrate reconstruction of the tt-bar system decaying hadronically and measurement of the top-partner mass from the m{sub T2} distribution. A top quark from a T{sub -} decay is polarized, and we discuss the effect of this polarization on the decay distributions.

  2. Top Quark Physics at the CDF Experiment

    SciTech Connect

    Stelzer, Bernd; Collaboration, for the CDF

    2010-07-01

    Fermilab's Tevatron accelerator is recently performing at record luminosities that enables a program systematically addressing the physics of top quarks. The CDF collaboration has analyzed up to 5 fb{sup -1} of proton anti-proton collisions from the Tevatron at a center of mass energy of 1.96 TeV. The large datasets available allow to push top quark measurements to higher and higher precision and have lead to the recent observation of electroweak single top quark production at the Tevatron. This article reviews recent results on top quark physics from the CDF experiment.

  3. Measurement of the top-antitop quark pair differential cross section with respect to the invariant mass of the pair in proton-antiproton collisions at a center of mass energy of 1.96 TeV

    SciTech Connect

    Bridgeman, Alice; /Illinois U., Urbana

    2008-10-01

    I present a measurement of the t{bar t} differential cross section, d{sigma}/dM{sub t{bar t}}, in p{bar p} collisions at {radical}s = 1.96 TeV using 2.7 fb{sup -1} of CDF II data. I find that d{sigma}/dM{sub t{bar t}} is consistent with the Standard Model expectation, as modeled by PYTHIA with CTEQ5L parton distribution functions. I set limits on the ratio {kappa}/M{sub Pl} in the Randall-Sundrum model by looking for Kaluza Klein gravitons which decay to top quarks. I find {kappa}/M{sub Pl} > 0.16 at the 95% confidence level.

  4. Top Jets at the LHC

    SciTech Connect

    Almeida, L.G.; Lee, S.J.; Perez, G.; Sung, I.; Virzi, J.

    2008-10-06

    We investigatethe reconstruction of high pT hadronically-decaying top quarksat the Large Hadron Collider. One of the main challenges in identifying energetictop quarks is that the decay products become increasingly collimated. This reducesthe efficacy of conventional reconstruction methods that exploit the topology of thetop quark decay chain. We focus on the cases where the decay products of the topquark are reconstructed as a single jet, a"top-jet." The most basic"top-tag" methodbased on jet mass measurement is considered in detail. To analyze the feasibility ofthe top-tagging method, both theoretical and experimental aspects of the large QCDjet background contribution are examined. Based on a factorization approach, wederive a simple analytic approximation for the shape of the QCD jet mass spectrum.We observe very good agreement with the Monte Carlo simulation. We consider high pT tt bar production in the Standard Model as an example, and show that our theoretical QCD jet mass distributions can efficiently characterize the background via sideband analyses. We show that with 25 fb-1 of data, our approach allows us to resolve top-jets with pT _> 1 TeV, from the QCD background, and about 1.5 TeV top-jets with 100 fb-1, without relying on b-tagging. To further improve the significancewe consider jet shapes (recently analyzed in 0807.0234 [hep-ph]), which resolve thesubstructure of energy flow inside cone jets. A method of measuring the top quarkpolarization by using the transverse momentum of the bottom quark is also presented.The main advantages of our approach are: (i) the mass distributions are driven byfirst principle calculations, instead of relying solely on Monte Carlo simulation; (ii) for high pT jets (pT _> 1 TeV), IR-safe jet shape variables are robust against detectorresolution effects. Our analysis can be applied to other boosted massive particlessuch as the electroweak gauge bosons and the Higgs.

  5. Protein Identification Using Top-Down

    SciTech Connect

    Liu, Xiaowen; Sirotkin, Yakov; Shen, Yufeng; Anderson, Gordon A.; Tsai, Yi-Hsuan S.; Ting, Ying S.; Goodlett, David R.; Smith, Richard D.; Bafna, Vineet; Pevzner, Pavel A.

    2012-06-01

    In the last two years, due to advances in protein separation and mass spectrometry, top-down mass spectrometry moved from analyzing single proteins to analyzing complex samples and identifying hundreds and even thousands of proteins. However, computational tools for database search of top-down spectra against protein databases are still in infancy. We describe MS-Align+, a fast algorithm for top-down protein identification based on spectral alignment that enables searches for unexpected post-translational modifications (PTMs). We also propose a method for evaluating statistical significance of top-down protein identifications and further benchmark MS-Align+ along with PIITA, ProSightPTM and SEQUEST, which were previously used for top-down MS/MS database searches. We demonstrate that MS-Align+ and PIITA significantly increase the number of identified proteins as compared to ProSightPTM and SEQUEST.

  6. Vacuum fluctuation effects on the {rho}-meson mass and the one-{rho} exchange potential at finite temperature and density

    SciTech Connect

    Zhang, Yi-Jun; Gao, Song; Su, Ru-Keng Zhang, Yi-Jun Gao, Song Su, Ru-Keng

    1997-12-01

    Based on thermofield dynamics, the temperature- and density-dependent effective mass and screening mass of {rho} meson have been calculated. The effects of vacuum fluctuation corrections through effective nucleon mass are examined. We have shown that vacuum fluctuations give an important correction to the self-energy of the {rho} meson and lead to a reduction of the {rho}-meson mass in hot and dense matter. The temperature and density dependence of one-{rho}-meson exchange potential with vacuum fluctuation correction is also given. {copyright} {ital 1997} {ital The American Physical Society}

  7. Observation of the Top Quark

    DOE R&D Accomplishments Database

    Kim, S. B.

    1995-08-01

    Top quark production is observed in{bar p}p collisions at{radical}s= 1.8 TeV at the Fermilab Tevatron. The Collider Detector at Fermilab (CDF) and D{O} observe signals consistent with t{bar t} to WWb{bar b}, but inconsistent with the background prediction by 4.8{sigma} (CDF), 4.6a (D{O}). Additional evidence for the top quark Is provided by a peak in the reconstructed mass distribution. The kinematic properties of the excess events are consistent with the top quark decay. They measure the top quark mass to be 176{plus_minus}8(stat.){plus_minus}10(sys.) GeV/c{sup 2} (CDF), 199{sub -21}{sup+19}(stat.){plus_minus}22(sys.) GeV/c{sup 2} (D{O}), and the t{bar t} production cross section to be 6.8{sub -2.4}{sup+3.6}pb (CDF), 6.4{plus_minus}2.2 pb (D{O}).

  8. Spherical Tippe Tops

    ERIC Educational Resources Information Center

    Cross, Rod

    2013-01-01

    A tippe top (see Fig. 1) is usually constructed as a truncated sphere with a cylindrical peg on top, as indicated in Fig. 2(a). When spun rapidly on a horizontal surface, a tippe top spins about a vertical axis while rotating slowly about a horizontal axis until the peg touches the surface. At that point, weight is transferred to the peg, the…

  9. Dare We Teach Tops?

    ERIC Educational Resources Information Center

    Featonby, David

    2010-01-01

    "Tops" are mentioned in classical literature and references are even found in the ancient world. For many children a top is one of the first mechanical toys that they play with by themselves, yet a full appreciation of their motion is rare. My hope is that this article will stimulate the reader's interest in tops, will help with the first stages…

  10. Top quark physics

    SciTech Connect

    Erbacher, Robin D.; /UC, Davis

    2005-10-01

    While the top quark was discovered in 1995 at the Fermilab Tevatron, a decade later they still have very little information about the top. As the heaviest particle yet discovered, the top quark is interesting in and of itself, but some speculate that it may play a special role in physics beyond the Standard Model. With Run 2 of the Tevatron well underway, they have the opportunity to study top quark properties with much better sensitivity, and to test whether top quarks behave as predicted by current theories. This article focuses on the basics of top quark physics at the Tevatron, highlighting only a sample of the many recent measurements, as new results are being released monthly, and constantly changing the landscape of our knowledge of top.

  11. Review of Top Quark Physics Results

    SciTech Connect

    Kehoe, R.; Narain, M.; Kumar, A.

    2007-12-01

    As the heaviest known fundamental particle, the top quark has taken a central role in the study of fundamental interactions. Production of top quarks in pairs provides an important probe of strong interactions. The top quark mass is a key fundamental parameter which places a valuable constraint on the Higgs boson mass and electroweak symmetry breaking. Observations of the relative rates and kinematics of top quark final states constrain potential new physics. In many cases, the tests available with study of the top quark are both critical and unique. Large increases in data samples from the Fermilab Tevatron have been coupled with major improvements in experimental techniques to produce many new precision measurements of the top quark. The first direct evidence for electroweak production of top quarks has been obtained, with a resulting direct determination of V{sub tb}. Several of the properties of the top quark have been measured. Progress has also been made in obtaining improved limits on potential anomalous production and decay mechanisms. This review presents an overview of recent theoretical and experimental developments in this field. We also provide a brief discussion of the implications for further efforts.

  12. Top and Electroweak Measurements at the Tevatron

    SciTech Connect

    Bartos, P.

    2016-01-01

    In this report, we summarize the latest results of the top-quark mass and electroweak measurements from the Tevatron. Since the world combination of top-quark mass measurements was done, CDF and D0 experiments improved the precision of several results. Some of them reach the relative precition below 1% for a single measurement. From the electroweak results, we report on the WW and WZ production cross section, measurements of the weak mixing angle and indirect measurements of W boson mass. The Tevatron results of the weak mixing angle are still the most precise ones of hadron colliders.

  13. Discovery of single top quark production

    SciTech Connect

    Gillberg, Dag

    2009-04-01

    The top quark is by far the heaviest known fundamental particle with a mass nearing that of a gold atom. Because of this strikingly high mass, the top quark has several unique properties and might play an important role in electroweak symmetry breaking - the mechanism that gives all elementary particles mass. Creating top quarks requires access to very high energy collisions, and at present only the Tevatron collider at Fermilab is capable of reaching these energies. Until now, top quarks have only been observed produced in pairs via the strong interaction. At hadron colliders, it should also be possible to produce single top quarks via the electroweak interaction. Studies of single top quark production provide opportunities to measure the top quark spin, how top quarks mix with other quarks, and to look for new physics beyond the standard model. Because of these interesting properties, scientists have been looking for single top quarks for more than 15 years. This thesis presents the first discovery of single top quark production. An analysis is performed using 2.3 fb-1 of data recorded by the D0 detector at the Fermilab Tevatron Collider at centre-of-mass energy √s = 1.96 TeV. Boosted decision trees are used to isolate the single top signal from background, and the single top cross section is measured to be σ(p$\\bar{p}$ → tb + X, tqb + X) = 3.74-0.74+0.95 pb. Using the same analysis, a measurement of the amplitude of the CKM matrix element Vtb, governing how top and b quarks mix, is also performed. The measurement yields: |V{sub tb}|f1L| = 1.05 -0.12+0.13, where f1L is the left-handed Wtb coupling. The separation of signal from background is improved by combining the boosted decision trees with two other multivariate techniques. A new cross section measurement is performed, and the significance for the excess over the predicted background exceeds 5

  14. Measurements of top quark properties at the Tevatron collider

    SciTech Connect

    Margaroli, Fabrizio

    2011-05-01

    The discovery of the top quark in 1995 opened a whole new sector of investigation of the Standard Model; today top quark physics remains a key priority of the Tevatron program. Some of the measurements of top quark properties, for example its mass, will be a long-standing legacy. The recent evidence of an anomalously large charge asymmetry in top quark events suggests that new physics could couple preferably with top quarks. I will summarize this long chapter of particle physics history and discuss the road the top quark is highlighting for the LHC program.

  15. Properties of the Top Quark

    SciTech Connect

    Wicke, Daniel; /Wuppertal U., Dept. Math.

    2009-08-01

    Tevatron experiments CDF and D0 and was the last of the quarks to be discovered. As the partner of the bottom quark the top quark is expected to have quantum numbers identical to that of the other known up-type quarks. Only the mass is a free parameter. We now know that it is more than 30 times heavier than the next heaviest quark, the bottom quark. Thus, within the Standard Model all production and decay properties are fully defined. Having the complete set of quarks further allows to verify constraints that the Standard Model puts on the sum of all quarks or particles. This alone is reason enough to experimentally study the top quark properties. The high value of the top quark mass and its closeness to the electroweak scale has inspired people to speculate that the top quark could have a special role in the electroweak symmetry breaking. Confirming the expected properties of the top quark experimentally establishes the top quark as we expect it to be. Any deviation from the expectations gives hints to new physics that may help to solve the outstanding questions. In this review the recent results on top quark properties obtained by the Tevatron experiments CDF and D0 are summarized. At the advent of the LHC special emphasis is given to the basic measurement methods and the dominating systematic uncertainties. After a short introduction to the Standard Model and the experimental environment in the remainder of this chapter, Chapter 2 describes the current status of top quark mass measurements. Then measurments of interaction properties are described in Chapter 3. Finally, Chapter 4 deals with analyses that consider hypothetical particles beyond the Standard Model in the observed events.

  16. TOP AND HIGGS PHYSICS AT THE HADRON COLLIDERS

    SciTech Connect

    Jabeen, Shabnam

    2013-10-20

    This review summarizes the recent results for top quark and Higgs boson measurements from experiments at Tevatron, a proton–antiproton collider at a center-of-mass energy of √ s =1 . 96 TeV, and the Large Hadron Collider, a proton–proton collider at a center- of-mass energy of √ s = 7 TeV. These results include the discovery of a Higgs-like boson and measurement of its various properties, and measurements in the top quark sector, e.g. top quark mass, spin, charge asymmetry and production of single top quark.

  17. Scalar top study: Detector optimization

    SciTech Connect

    Milstene, C.; Sopczak, A.; /Lancaster U.

    2006-09-01

    A vertex detector concept of the Linear Collider Flavor Identification (LCFI) collaboration, which studies pixel detectors for heavy quark flavor identification, has been implemented in simulations for c-quark tagging in scalar top studies. The production and decay of scalar top quarks (stops) is particularly interesting for the development of the vertex detector as only two c-quarks and missing energy (from undetected neutralinos) are produced for light stops. Previous studies investigated the vertex detector design in scenarios with large mass differences between stop and neutralino, corresponding to large visible energy in the detector. In this study we investigate the tagging performance dependence on the vertex detector design in a scenario with small visible energy for the International Linear Collider (ILC).

  18. Top Quark Production at the Tevatron

    SciTech Connect

    Mietlicki, David J.

    2011-12-01

    The top quark is the most recently discovered of the standard model quarks, and because of its very large mass, studies of the top quark and its interactions are important both as tests of the standard model and searches for new phenomena. In this document, recent results of analyses of top quark production, via both the electroweak and strong interactions, from the CDF and D0 experiments are presented. The results included here utilize a dataset corresponding to up to 6 fb{sup -1} of integrated luminosity, slightly more than half of the dataset recorded by each experiment before the Tevatron was shutdown in September 2011.

  19. Top quark properties from the Tevatron

    SciTech Connect

    Klute, Markus; /MIT, LNS

    2006-05-01

    This report describes latest measurements and studies of top quark properties from the Tevatron in Run II with an integrated luminosity of up to 750 pb{sup -1}. Due to its large mass of about 172 GeV/c{sup 2}, the top quark provides a unique environment for tests of the Standard Model and is believed to yield sensitivity to new physics beyond the Standard Model. With data samples of close to 1 fb{sup -1} the CDF and D0 collaborations at the Tevatron enter a new area of precision top quark measurements.

  20. The search for top at CDF

    SciTech Connect

    Liss, T.M.; CDF Collaboration

    1991-08-01

    We present results on the search for the top quark in {bar p}p collisions at {radical}s = 1.8 TeV. The data sample collected during the 1988--89 run with the Collider Detector at Fermilab (CDF) includes more than 4 pb{sup {minus}1}. We report here on an extension of previously published searches for the top quark in electron + jets and the dilepton channel electron-muon. The 95% confidence level limit on the top mass is 89 GeV/c{sup 2}.

  1. The Top Quark, QCD, And New Physics.

    DOE R&D Accomplishments Database

    Dawson, S.

    2002-06-01

    The role of the top quark in completing the Standard Model quark sector is reviewed, along with a discussion of production, decay, and theoretical restrictions on the top quark properties. Particular attention is paid to the top quark as a laboratory for perturbative QCD. As examples of the relevance of QCD corrections in the top quark sector, the calculation of e{sup+}e{sup -}+ t{bar t} at next-to-leading-order QCD using the phase space slicing algorithm and the implications of a precision measurement of the top quark mass are discussed in detail. The associated production of a t{bar t} pair and a Higgs boson in either e{sup+}e{sup -} or hadronic collisions is presented at next-to-leading-order QCD and its importance for a measurement of the top quark Yulrawa coupling emphasized. Implications of the heavy top quark mass for model builders are briefly examined, with the minimal supersymmetric Standard Model and topcolor discussed as specific examples.

  2. THE TOP QUARK, QCD, AND NEW PHYSICS.

    SciTech Connect

    DAWSON,S.

    2002-06-01

    The role of the top quark in completing the Standard Model quark sector is reviewed, along with a discussion of production, decay, and theoretical restrictions on the top quark properties. Particular attention is paid to the top quark as a laboratory for perturbative QCD. As examples of the relevance of QCD corrections in the top quark sector, the calculation of e{sup +}e{sup -} + t{bar t} at next-to-leading-order QCD using the phase space slicing algorithm and the implications of a precision measurement of the top quark mass are discussed in detail. The associated production of a t{bar t} pair and a Higgs boson in either e{sup +}e{sup -} or hadronic collisions is presented at next-to-leading-order QCD and its importance for a measurement of the top quark Yulrawa coupling emphasized. Implications of the heavy top quark mass for model builders are briefly examined, with the minimal supersymmetric Standard Model and topcolor discussed as specific examples.

  3. An algorithm for nonrelativistic quantum-mechanical finite-nuclear-mass variational calculations of nitrogen atom in L = 0, M = 0 states using all-electrons explicitly correlated Gaussian basis functions.

    PubMed

    Sharkey, Keeper L; Adamowicz, Ludwik

    2014-05-01

    An algorithm for quantum-mechanical nonrelativistic variational calculations of L = 0 and M = 0 states of atoms with an arbitrary number of s electrons and with three p electrons have been implemented and tested in the calculations of the ground (4)S state of the nitrogen atom. The spatial part of the wave function is expanded in terms of all-electrons explicitly correlated Gaussian functions with the appropriate pre-exponential Cartesian angular factors for states with the L = 0 and M = 0 symmetry. The algorithm includes formulas for calculating the Hamiltonian and overlap matrix elements, as well as formulas for calculating the analytic energy gradient determined with respect to the Gaussian exponential parameters. The gradient is used in the variational optimization of these parameters. The Hamiltonian used in the approach is obtained by rigorously separating the center-of-mass motion from the laboratory-frame all-particle Hamiltonian, and thus it explicitly depends on the finite mass of the nucleus. With that, the mass effect on the total ground-state energy is determined. PMID:24811630

  4. Optimum Shape Design against Flutter of a Cantilevered Column with AN End-Mass of Finite Size Subjected to a Non-Conservative Load

    NASA Astrophysics Data System (ADS)

    LANGTHJEM, MIKAEL A.; SUGIYAMA, YOSHIHIKO

    1999-09-01

    Optimum design for dynamic stability of slender cantilevered columns subjected to a follower force, due to a rocket thrust, is investigated. The aim is to determine the tapering of the column which maximizes the critical value of the rocket thrust (at which flutter is initiated) under the constraint of constant length and volume of the column. The rocket thrust is assumed to be produced by a solid rocket motor mounted at the tip end of the column. The rocket motor is simplified as a massive ball with the same material density as the column. Based on experimental evidence [1, 2] it is argued that a mathematical model without damping gives the practical stability limit if internal and external damping is small and the rocket thrust acts only in a short interval of time. Optimum columns are determined for various sizes of the end-ball (rocket motor). For small sizes, the critical thrust can be significantly increased by optimization, about eight times. By practical (experimental realizable) values of the mass ratio μ=(mass of end-ball)/(mass of column) the critical thrust can only be increased 1·3-1·4 times which is similar to the case of a pure conservative (dead) end load. Also, it is found that the great sensitivity to small changes in design parameters, which significantly complicates optimization of the pure Beck's column, is not present for practical values of μ. It is argued then, that the ‘pure’ Beck's column should be considered as a theoretical limit case of vanishing end-mass.

  5. Measurement of top quark polarisation in t-channel single top quark production

    SciTech Connect

    Khachatryan, Vardan

    2015-11-09

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is used to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.

  6. Measurement of top quark polarisation in t-channel single top quark production

    NASA Astrophysics Data System (ADS)

    Khachatryan, V.; Sirunyan, A. M.; Tumasyan, A.; Adam, W.; Asilar, E.; Bergauer, T.; Brandstetter, J.; Brondolin, E.; Dragicevic, M.; Erö, J.; Flechl, M.; Friedl, M.; Frühwirth, R.; Ghete, V. M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Knünz, V.; König, A.; Krammer, M.; Krätschmer, I.; Liko, D.; Matsushita, T.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schieck, J.; Schöfbeck, R.; Strauss, J.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Cornelis, T.; de Wolf, E. A.; Janssen, X.; Knutsson, A.; Lauwers, J.; Luyckx, S.; van de Klundert, M.; van Haevermaet, H.; van Mechelen, P.; van Remortel, N.; van Spilbeeck, A.; Abu Zeid, S.; Blekman, F.; D'Hondt, J.; Daci, N.; de Bruyn, I.; Deroover, K.; Heracleous, N.; Keaveney, J.; Lowette, S.; Moreels, L.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; van Doninck, W.; van Mulders, P.; van Onsem, G. P.; van Parijs, I.; Barria, P.; Brun, H.; Caillol, C.; Clerbaux, B.; de Lentdecker, G.; Fasanella, G.; Favart, L.; Grebenyuk, A.; Karapostoli, G.; Lenzi, T.; Léonard, A.; Maerschalk, T.; Marinov, A.; Perniè, L.; Randle-Conde, A.; Seva, T.; Vander Velde, C.; Vanlaer, P.; Yonamine, R.; Zenoni, F.; Zhang, F.; Beernaert, K.; Benucci, L.; Cimmino, A.; Crucy, S.; Dobur, D.; Fagot, A.; Garcia, G.; Gul, M.; McCartin, J.; Ocampo Rios, A. A.; Poyraz, D.; Ryckbosch, D.; Salva, S.; Sigamani, M.; Tytgat, M.; van Driessche, W.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bondu, O.; Brochet, S.; Bruno, G.; Caudron, A.; Ceard, L.; da Silveira, G. G.; Delaere, C.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jafari, A.; Jez, P.; Komm, M.; Lemaitre, V.; Mertens, A.; Musich, M.; Nuttens, C.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Beliy, N.; Hammad, G. H.; Aldá Júnior, W. L.; Alves, F. L.; Alves, G. A.; Brito, L.; Correa Martins Junior, M.; Hamer, M.; Hensel, C.; Mora Herrera, C.; Moraes, A.; Pol, M. E.; Rebello Teles, P.; Belchior Batista Das Chagas, E.; Carvalho, W.; Chinellato, J.; Custódio, A.; da Costa, E. M.; de Jesus Damiao, D.; de Oliveira Martins, C.; Fonseca de Souza, S.; Huertas Guativa, L. M.; Malbouisson, H.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado da Silva, W. L.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E. J.; Vilela Pereira, A.; Ahuja, S.; Bernardes, C. A.; de Souza Santos, A.; Dogra, S.; Fernandez Perez Tomei, T. R.; Gregores, E. M.; Mercadante, P. G.; Moon, C. S.; Novaes, S. F.; Padula, Sandra S.; Romero Abad, D.; Ruiz Vargas, J. C.; Aleksandrov, A.; Hadjiiska, R.; Iaydjiev, P.; Rodozov, M.; Stoykova, S.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Litov, L.; Pavlov, B.; Petkov, P.; Ahmad, M.; Bian, J. G.; Chen, G. M.; Chen, H. S.; Chen, M.; Cheng, T.; Du, R.; Jiang, C. H.; Plestina, R.; Romeo, F.; Shaheen, S. M.; Spiezia, A.; Tao, J.; Wang, C.; Wang, Z.; Zhang, H.; Asawatangtrakuldee, C.; Ban, Y.; Li, Q.; Liu, S.; Mao, Y.; Qian, S. J.; Wang, D.; Xu, Z.; Avila, C.; Cabrera, A.; Chaparro Sierra, L. F.; Florez, C.; Gomez, J. P.; Gomez Moreno, B.; Sanabria, J. C.; Godinovic, N.; Lelas, D.; Puljak, I.; Ribeiro Cipriano, P. M.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Micanovic, S.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P. A.; Rykaczewski, H.; Bodlak, M.; Finger, M.; Finger, M.; Abdelalim, A. A.; Awad, A.; El Sawy, M.; Mahrous, A.; Radi, A.; Calpas, B.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Veelken, C.; Eerola, P.; Pekkanen, J.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Talvitie, J.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J. L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Machet, M.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Zghiche, A.; Antropov, I.; Baffioni, S.; Beaudette, F.; Busson, P.; Cadamuro, L.; Chapon, E.; Charlot, C.; Dahms, T.; Davignon, O.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Jo, M.; Lisniak, S.; Mastrolorenzo, L.; Miné, P.; Naranjo, I. N.; Nguyen, M.; Ochando, C.; Ortona, G.; Paganini, P.; Pigard, P.; Regnard, S.; Salerno, R.; Sauvan, J. B.; Sirois, Y.; Strebler, T.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Buttignol, M.; Chabert, E. C.; Chanon, N.; Collard, C.; Conte, E.; Coubez, X.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.; Merlin, J. A.; Skovpen, K.

    2016-04-01

    A first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. A differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is used to extract a top quark spin asymmetry of 0.26 ± 0.03(stat) ± 0.10(syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44. [Figure not available: see fulltext.

  7. Measurement of top quark polarisation in t-channel single top quark production

    DOE PAGESBeta

    Khachatryan, Vardan

    2016-04-13

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is usedmore » to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.« less

  8. Production and decay of heavy top quarks

    SciTech Connect

    Kauffman, R.P.

    1989-08-01

    Experimental evidence indicates that the top quark exists and has a mass between 50 and 200 GeV/c{sup 2}. The decays of a top quark with a mass in this range are studied with emphasis placed on the mass region near the threshold for production of real W bosons. Topics discussed are: (1) possible enhancement of strange quark production when M{sub W} + m{sub s} < m{sub t} < M{sub W} + m{sub b}; (2) exclusive decays of T mesons to B and B{asterisk} mesons using the non-relativistic quark model; (3) polarization of intermediate W's in top quark decay as a source of information on the top quark mass. The production of heavy top quarks in an e{sup +}e{sup {minus}} collider with a center-of-mass energy of 2 TeV is studied. The effective-boson approximation for photons, Z{sup 0}'s and W's is reviewed and an analogous approximation for interfaces between photons and Z{sup 0}'s is developed. The cross sections for top quark pair production from photon-photon, photon-Z{sup 0}, Z{sup 0}Z{sup 0}, and W{sup +}W{sup {minus}} fusion are calculated using the effective-boson approximation. Production of top quarks along with anti-bottom quarks via {gamma}W{sup +} and Z{sup 0}W{sup +} fusion is studied. An exact calculation of {gamma}e{sup +} {yields} {bar {nu}}t{bar b} is made and compared with the effective-W approximation. 31 refs., 46 figs.

  9. Training Top 125

    ERIC Educational Resources Information Center

    Training, 2011

    2011-01-01

    Top companies realize how vital training is to their success and continue to invest in it, even in trying times. This article presents "Training" magazine's 11th annual ranking of the top companies with employee-sponsored workforce training and development. First-time No. 1 winner Farmers Insurance puts such a premium on learning that its new…

  10. Training Top 125

    ERIC Educational Resources Information Center

    Training, 2012

    2012-01-01

    The best learning and development organizations support business initiatives tactically "and" help drive strategic change. Verizon did just that, earning it the No. 1 spot for the first time on the Training Top 125. Verizon and the other 2012 Top 125 winners continued to invest in training, collectively dedicating a mean of 4.52 percent of their…

  11. The Driven Spinning Top

    ERIC Educational Resources Information Center

    Grosu, Ioan; Featonby, David

    2016-01-01

    This driven top is quite a novelty and can, with some trials, be made using the principles outlined here. This new top has many applications in developing both understanding and skills and these are detailed in the article. Depending on reader's available time and motivation they may feel an urge to make one themselves, or simply invest a few…

  12. Training Top 50.

    ERIC Educational Resources Information Center

    Training, 2001

    2001-01-01

    Identifies the top 50 companies in terms of the amount spent on training and development, the number of hours of training per employee, and percentage of payroll spent on training. Profiles the top five plus four additional companies selected by the magazine's editors. (SK)

  13. Top Down proteomics: Facts and perspectives

    SciTech Connect

    Catherman, Adam D.; Skinner, Owen S.; Kelleher, Neil L.

    2014-03-21

    Highlights: • Top Down versus Bottom Up proteomics analysis. • Separations methods for Top Down proteomics. • Developments in mass spectrometry instrumentation and fragmentation. • Native mass spectrometry. - Abstract: The rise of the “Top Down” method in the field of mass spectrometry-based proteomics has ushered in a new age of promise and challenge for the characterization and identification of proteins. Injecting intact proteins into the mass spectrometer allows for better characterization of post-translational modifications and avoids several of the serious “inference” problems associated with peptide-based proteomics. However, successful implementation of a Top Down approach to endogenous or other biologically relevant samples often requires the use of one or more forms of separation prior to mass spectrometric analysis, which have only begun to mature for whole protein MS. Recent advances in instrumentation have been used in conjunction with new ion fragmentation using photons and electrons that allow for better (and often complete) protein characterization on cases simply not tractable even just a few years ago. Finally, the use of native electrospray mass spectrometry has shown great promise for the identification and characterization of whole protein complexes in the 100 kDa to 1 MDa regime, with prospects for complete compositional analysis for endogenous protein assemblies a viable goal over the coming few years.

  14. En-masse Retraction of the Maxillary Anterior Teeth by Applying Force from Four Different Levels – A Finite Element Study

    PubMed Central

    Keluskar, Kanhoba M; Vasisht, Vikram N; Revankar, Siddharth

    2014-01-01

    Objective: To find out if it is possible to control maxillary anterior teeth in sagittal and vertical plane during retraction by altering the vertical levels of force application in the posterior region, i.e. identifying the type of movement of the maxillary anterior teeth which occurs when force would be applied from four different levels i.e. High, Medium, and Low pull Implants and from a conventional Molar hook and also to quantify the retraction and intrusion components of force thus setting a guideline for the implant height placement. Materials and Methods: A Finite Element Model of maxillary dentition along with alveolar bone, brackets and wire was developed with defined material properties. The model was analysed to calculate the displacement when force was applied from different levels. Results: From all points of force application, anterior teeth tipped lingually in the sagittal plane, whereas in the vertical plane extrusion was seen when retracted from molar hook and intrusion was seen when retracted from implants. For every mm of apical displacement of implant, the retraction component of force reduces approximately by around 1% and intrusion component of force increases approximately by around 0.3%. Conclusion: Based on the results of this study we can reckon that by changing the position of implant in vertical plane one will have very little effect on the type of tooth movement. As the point of force application moves apically, type of tooth movement in the sagittal plane remained almost constant and in vertical plane intrusion is slightly increased. PMID:25386516

  15. Extracting excited mesons from the finite volume

    SciTech Connect

    Doring, Michael

    2014-12-01

    As quark masses come closer to their physical values in lattice simulations, finite volume effects dominate the level spectrum. Methods to extract excited mesons from the finite volume are discussed, like moving frames in the presence of coupled channels. Effective field theory can be used to stabilize the determination of the resonance spectrum.

  16. Top quark property measurements with ATLAS

    NASA Astrophysics Data System (ADS)

    Rudolph, M.; Atlas Collaboration

    2016-07-01

    This contribution covers recent results on the properties of the top quark as measured with the ATLAS detector at the Large Hadron Collider, using data collected at center-of-mass energies of 7 and 8TeV during 2011 and 2012. Results on the t bar{{t}} charge asymmetry and spin correlation, and on the mass of the top quark are discussed. The most recent results expand on the first ATLAS measurements with complementary analysis channels, new observables, and direct comparisons to new physics models. No significant deviations from Standard Model predictions have been found.

  17. Measurements and searches with top quarks

    SciTech Connect

    Peters, Reinhild Yvonne; /Wuppertal U.

    2008-10-01

    In 1995 the last missing member of the known families of quarks, the top quark, was discovered by the CDF and D0 experiments at the Tevatron, a proton-antiproton collider at Fermilab near Chicago. Until today, the Tevatron is the only place where top quarks can be produced. The determination of top quark production and properties is crucial to understand the Standard Model of particle physics and beyond. The most striking property of the top quark is its mass--of the order of the mass of a gold atom and close to the electroweak scale--making the top quark not only interesting in itself but also as a window to new physics. Due to the high mass, much higher than of any other known fermion, it is expected that the top quark plays an important role in electroweak symmetry breaking, which is the most prominent candidate to explain the mass of particles. In the Standard Model, electroweak symmetry breaking is induced by one Higgs field, producing one additional physical particle, the Higgs boson. Although various searches have been performed, for example at the Large Electron Positron Collider (LEP), no evidence for the Higgs boson could yet be found in any experiment. At the Tevatron, multiple searches for the last missing particle of the Standard Model are ongoing with ever higher statistics and improved analysis techniques. The exclusion or verification of the Higgs boson can only be achieved by combining many techniques and many final states and production mechanisms. As part of this thesis, the search for Higgs bosons produced in association with a top quark pair (t{bar t}H) has been performed. This channel is especially interesting for the understanding of the coupling between Higgs and the top quark. Even though the Standard Model Higgs boson is an attractive candidate, there is no reason to believe that the electroweak symmetry breaking is induced by only one Higgs field. In many models more than one Higgs boson are expected to exist, opening even more channels

  18. Observation of the top quark

    SciTech Connect

    Greenlee, H.; D0 Collaboration

    1995-05-01

    The DO collaboration reports on a search for the Standard Model top quark in p{bar p} collisions at {radical}s = 1.8 TeV at the Fermilab Tevatron, with an integrated luminosity of approximately 50 pb{sup {minus}1}. We have searched for t{bar t} production in the dilepton and single-lepton decay channels, with and without tagging of b quark jets. We observe 17 events with an expected background of 3.8 {plus_minus} 0.6 events. The probability for an upward fluctuation of the background to produce the observed signal is 2 {times} 10{sup {minus}6} (equivalent to 4.6 standard deviations). The kinematic properties of the excess events are consistent with top quark decay. We conclude that we have observed the top quark and measure its mass to be 199{sub {minus}21}{sup +19} (stat.) {plus_minus}22 (syst.) GeV/c{sup 2} and its production cross section to be 6.4 {plus_minus} 2.2 pb.

  19. The driven spinning top

    NASA Astrophysics Data System (ADS)

    Grosu, Ioan; Featonby, David

    2016-05-01

    This driven top is quite a novelty and can, with some trials, be made using the principles outlined here. This new top has many applications in developing both understanding and skills and these are detailed in the article. Depending on reader’s available time and motivation they may feel an urge to make one themselves, or simply invest a few pounds in the one that has been designed, tested and manufactured to a high standard. Either way the unique design of the driven top can provide several hours of interesting experimentation. Our aim here is simply to inform and inspire readers to further investigation and experimentation.

  20. Top physics: CDF results

    SciTech Connect

    K. Bloom

    2004-06-23

    The top quark plays an important role in the grand scheme of particle physics, and is also interesting on its own merits. We present recent results from CDF on top-quark physics based on 100-200 pb{sup -1} of p{bar p} collision data. We have measured the t{bar t} cross section in different decay modes using several different techniques, and are beginning our studies of top-quark properties. New analyses for this conference include a measurement of {sigma}{sub t{bar t}} in the lepton-plus-jets channel using a neural net to distinguish signal and background events, and measurements of top-quark branching fractions.

  1. Dare we teach tops?

    NASA Astrophysics Data System (ADS)

    Featonby, David

    2010-07-01

    Tops are mentioned in classical literature and references are even found in the ancient world. For many children a top is one of the first mechanical toys that they play with by themselves, yet a full appreciation of their motion is rare. My hope is that this article will stimulate the reader's interest in tops, will help with the first stages of understanding, and will provide inspiration for looking into the subject further. As a result of this, teachers will be happy and have the confidence to discuss these wonderful toys with their pupils. The article discusses tops and spinning objects of various types, and relates them to some of the physical principles that they demonstrate.

  2. Flat Top & rocky terrain

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Flat Top, the rectangular rock at lower right, is part of a stretch of rocky terrain in this image, taken by the deployed Imager for Mars Pathfinder (IMP) on Sol 3. Dust has accumulated on the top of Flat Top, but is not present on the sides due to the steep angles of the rock. This dust may have been placed by dust storms moving across the Martian surface. Flat Top has been studied using several different color filters on the IMP camera.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C.

  3. 4 Top Healthy Snacks

    MedlinePlus

    ... this page please turn Javascript on. Feature: Reducing Childhood Obesity 4 Top Healthy Snacks Past Issues / Spring - Summer ... looking at whether or not the risks for childhood obesity could actually start before birth. The subject needs ...

  4. Measurements of the Top Quark at the Tevatron Collider

    SciTech Connect

    Cerrito, Lucio

    2007-01-01

    The authors present recent preliminary measurements of the top-antitop pair production cross section and determinations of the top quark pole mass, performed using the data collected by the CDF and D0 Collaborations at the Tevatron Collider. In the lepton plus jets final state, with semileptonic B decay, the pair production cross section has now been measured at CDF using {approx} 760 pb{sup -1} of proton-antiproton collisions at a center-of-mass energy of {radical}s = 1.96 TeV. A measurement of the production cross section has also been made with {approx} 1 fb{sup -1} of data in the all-jets final state by the CDF Collaboration. The mass of the top quark has now been measured using {approx} 1 fb{sup -1} of collision data using all decay channels of the top quark pair, yielding the most precise measurements of the top mass to date.

  5. Towards the Top with D0

    SciTech Connect

    Deliot, Frederic

    2012-01-01

    The plan of this manuscript follows my research path over the past 10 years: the muon identification and common analysis tools at DØ, the measurement of the inclusive production of W boson decaying into muon and top quark studies. In the first section, I describe my work about muon identification, certification of the standard muon identification criteria, measurement of the muon selection efficiency and about the development of common analysis format and tools. In the second section, I explain how these efficiency measurements can be used to measure the inclusive W boson production cross section in the muon channel. The W ! μν cross section measurement can be seen as a standard candle to establish several analysis pieces that have to be put in place to perform more complex measurements like top quark analyses. In the last section I introduce more extensively the top quark physics at the Tevatron and describe in more details the main analyses in the dilepton channel I was involved in: the measurement of the tt inclusive cross section in the dilepton channel as well as the ratio of cross sections, the measurement of the top quark mass in the dilepton channel, the extraction of the mass from the tt cross section and the Tevatron top quark mass combination. Before concluding, I finish the section with the description of the latest results on the tt charge asymmetry both at the Tevatron and at the LHC.

  6. Searches for New Physics in Top Decays at D0

    SciTech Connect

    Pleier, Marc-Andre; /Brookhaven

    2011-08-01

    The Tevatron proton-antiproton collider at Fermilab with its centre of mass energy of 1.96 TeV allows for pair production of top quarks and the study of top quark decay properties. This report reflects the current status of measurements of the W boson helicity in top quark decays and the ratio of top quark branching fractions as well as searches for neutral current top quark decays and pair production of fourth generation t' quarks, performed by the D0 Collaboration utilising datasets of up to 5.4 fb{sup -1}.

  7. Measurement of the Single Top Quark Cross Section in the Lepton Plus Jets Final State in Proton-Antiproton Collisions at a Center of Mass Energy of 1.96 TeV Using the CDF II Detector

    SciTech Connect

    Wu, Zhenbin

    2012-01-01

    We present a measurement of the single top quark cross section in the lepton plus jets final state using an integrated luminosity corresponding to 7.5 fb-1 of p\\bar p collision data collected by the Collider Detector at Fermilab. The single top candidate events are identified by the signature of a charged lepton, large missing transverse energy, and two or three jets with at least one of them identified as originating from a bottom quark. A new Monte Carlo generator POWHEG is used to model the single top quark production processes, which include s-channel, t-channel, and Wt-channel. A neural network multivariate method is exploited to discriminate the single top quark signal from the comparatively large backgrounds. We measure a single top production cross section of $3.04^{+0.57}_{-0.53} (\\mathrm{stat.~+~syst.})$ pb assuming $m_{\\rm top}=172.5$~GeV/$c^2$. In addition, we extract the CKM matrix element value $|V_{tb}|=0.96\\pm 0.09~(\\mathrm{stat.~+~syst.})\\ ± 0.05~(\\mathrm{theory})$ and set a lower limit of $|V_{tb}|>0.78$ at the 95% credibility level.

  8. Top quark compositeness: Feasibility and implications

    SciTech Connect

    Pomarol, Alex; Serra, Javi

    2008-10-01

    In models of electroweak symmetry breaking in which the standard model fermions get their masses by mixing with composite states, it is natural to expect the top quark to show properties of compositeness. We study the phenomenological viability of having a mostly composite top. The strongest constraints are shown to mainly come from one-loop contributions to the T parameter. Nevertheless, the presence of light custodial partners weakens these bounds, allowing in certain cases for a high degree of top compositeness. We find regions in the parameter space in which the T parameter receives moderate positive contributions, favoring the electroweak fit of this type of model. We also study the implications of having a composite top at the LHC, focusing on the process pp{yields}tttt(bb) whose cross section is enhanced at high energies.

  9. Top Quark Physics at the Tevatron

    SciTech Connect

    Jung, Andreas W.

    2015-05-21

    An overview of recent top quark measurements using the full Run II data set of CDF or D0 at the Tevatron is presented. Results are complementary to the ones at the LHC. Recent measurements of the production cross section of top quarks in strong and electroweak production and of top quark production asymmetries are presented. The latter includes the measurement of the tt-bar production asymmetry by D0 in the dilepton decay channel. Within their uncertainties the results from all these measurements agree with their respective Standard Model expectation. Finally latest updates on measurements of the top quark mass are discussed, which at the time of the conference are the most precise determinations.

  10. Review of recent top quark measurements

    SciTech Connect

    Heinson, A.P.; /UC, Riverside

    2004-11-01

    At the Tevatron Collider at Fermilab, a large number of top quarks have been produced in the ongoing run. The CDF and D0 collaborations have made first measurements of the t{bar t} cross section in several decay channels, and have measured the top quark mass. In addition, they have set new limits on the cross sections for single top quark production, and have started to measure some of the properties of the top quark via studies of its decays. This paper summarizes the status of these measurements and discusses where they are heading in the next few years. The paper is based on a talk I gave at the Rencontres du Vietnam in Hanoi, August 2004; the results have been updated to show the latest values and new measurements.

  11. A new application of a finite element heat and mass transfer numerical modeling code (FEHM) to heat and fluid circulation in lava domes

    NASA Astrophysics Data System (ADS)

    Ball, J. L.; Stauffer, P. H.; Calder, E. S.

    2012-12-01

    Lava domes have been well-characterized in terms of their surface structure and activity, but there is much to be learned about their internal structure and geothermal systems. Even when a lava dome is no longer actively erupting, subsurface studies are often difficult to conduct; lava domes are highly complex structures, but their rugged nature often precludes systematic drilling and/or geophysical surveys. Because of this, we know little about the internal geothermal activity that may still contribute to both hazards and opportunities for exploitation of mineral deposits and hot groundwater. Despite the difficulty of studying the interior of lava domes directly, numerical modeling can still provide insights into the behavior of their geothermal systems. Lava domes have the potential to be highly transmissive structures, and the presence of hot springs in the vicinity of lava domes (Santiaguito in Guatemala, La Soufriere on Guadeloupe) suggests that water circulation may be an important process in post-eruptive dome evolution. FEHM, a heat and mass transfer modeling code developed at Los Alamos National Laboratory (fehm.lanl.gov) is an ideal tool to study fluid and gas circulation in geologic structures. FEHM was developed for subsurface reservoir modeling (originally for the Hot Dry Rock geothermal project) and is capable of dealing with both high- (magmatic) and low-temperature fluids. In this study, FEHM has been used in combination with a LANL-developed grid-generating utility (LaGriT) to create an idealized model of water circulation in a saturated lava dome. Multiple material regions are used to represent the dome core, outer talus layer, conduit, and volcanic substrate. Material properties (such as permeability, porosity, density, etc.) were chosen from a combination of literature review and sensitivity testing using a simplified dome geometry and a continuum modeling approach that accounts for fractures (Equivalent Porous Medium) was used when applying

  12. Gravity-induced stresses in finite slopes

    USGS Publications Warehouse

    Savage, W.Z.

    1994-01-01

    An exact solution for gravity-induced stresses in finite elastic slopes is presented. This solution, which is applied for gravity-induced stresses in 15, 30, 45 and 90?? finite slopes, has application in pit-slope design, compares favorably with published finite element results for this problem and satisfies the conditions that shear and normal stresses vanish on the ground surface. The solution predicts that horizontal stresses are compressive along the top of the slopes (zero in the case of the 90?? slope) and tensile away from the bottom of the slopes, effects which are caused by downward movement and near-surface horizontal extension in front of the slope in response to gravity loading caused by the additional material associated with the finite slope. ?? 1994.

  13. Kernel mucking in top

    SciTech Connect

    LeFebvre, W.

    1994-08-01

    For many years, the popular program top has aided system administrations in examination of process resource usage on their machines. Yet few are familiar with the techniques involved in obtaining this information. Most of what is displayed by top is available only in the dark recesses of kernel memory. Extracting this information requires familiarity not only with how bytes are read from the kernel, but also what data needs to be read. The wide variety of systems and variants of the Unix operating system in today`s marketplace makes writing such a program very challenging. This paper explores the tremendous diversity in kernel information across the many platforms and the solutions employed by top to achieve and maintain ease of portability in the presence of such divergent systems.

  14. Choosing a Top Ten.

    ERIC Educational Resources Information Center

    IUCN Bulletin, 1984

    1984-01-01

    Presents an annotated list of 34 animals and 32 plants which are candidates for a list of the top 10 endangered species. Also presents the criteria used to formulate these lists. They include the conservation value (urgency prominance, biological value) and operational considerations (such as cost factors) for each species. (JN)

  15. Top 100 Degree Producers.

    ERIC Educational Resources Information Center

    Black Issues in Higher Education, 2001

    2001-01-01

    Provides data on bachelor's degrees awarded to minority students in 1999-2000. Tables include total minority degrees and degrees awarded to African Americans, American Indians, Asian Americans, and Hispanics by type of school (uses Carnegie classification). Another table presents top disciplines by race/ethnicity. (EV)

  16. Top Concerns for 1993.

    ERIC Educational Resources Information Center

    Johnson, Sandra L.; Meyerson, Joel W.

    1992-01-01

    An annual national survey of college and university trustees indicates five top social, political, and economic areas of concern for higher education: public opinion about higher education; demographic trends; implications of family income and savings rate; effects of recession and unemployment; and the direction of national education policy. (MSE)

  17. Top Hispanic Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    This article presents a list of the top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M.H. Borden, professor of educational leadership and policy students at the Indiana University Bloomington. For the year 2012, the listings focus on Hispanic students. Data for…

  18. Ten Top Tech Trends

    ERIC Educational Resources Information Center

    McLester, Susan

    2008-01-01

    In this article, the author discusses the major technical issues, products, and practices of the day. The top ten tech trends are listed and discussed. These include: (1) data mining; (2) cyberbullying; (3) 21st century skills; (4) digital content; (5) learning at leisure; (6) personal responders; (7) mobile tools; (8) bandwidth; (9) open-source…

  19. Top Quark Production at CDF

    SciTech Connect

    Moed, Shulamit

    2010-02-10

    The large data samples of top quark candidate events collected at the Tevatron CDF II experiment allow for a variety of measurements to analyze the production of the top quark. This article discusses recent results of top quark production at CDF presented at the SUSY09 conference, including updates to the top pair production cross section, forward-backward asymmetry in tt-bar production, single top search, search for top resonances and a search for heavy top. The discussed measurements utilize up to 3.2 fb{sup -1} of integrated luminosity collected at CDF.

  20. Top quark production at CDF

    SciTech Connect

    Moed, Shulamit; /Harvard U.

    2010-01-01

    The large data samples of top quark candidate events collected at the Tevatron CDF II experiment allow for a variety of measurements to analyze the production of the top quark. This article discusses recent results of top quark production at CDF presented at the SUSY09 conference, including updates to the top pair production cross section, forward-backward asymmetry in t{bar t} production, single top search, search for top resonances and a search for heavy top. The discussed measurements utilize up to 3.2 fb{sup -1} of integrated luminosity collected at CDF.

  1. Top quark physics at CDF

    SciTech Connect

    Caner, A.; CDF Collaboration

    1996-08-01

    We present preliminary results on top quark physics recently obtained by the CDF collaboration. The data sample consists of 110 {ital pb}{sup -1} of {ital p{anti p}} collisions at {radical}{ital s} = 1.8 TeV, collected with the Collider Detector at Fermilab during the period 1992 - 1995. We report on the {ital t{anti t}} production cross section and on the top quark mass. The measurements are made in three topologies, corresponding to the decay modes of the {ital Wb} pairs in the final state: lepton + multi-jets, dilepton and all hadronic final state. The analysis performed on the single lepton sample yields the most accurate measurements, due to the good acceptance and the favorable signal to noise ratio obtained after applying some b-tagging techniques. In this channel we measure: {sigma}{sub {ital t{anti t}}} = 6.8{sup +2.3}{sub -1.8} pb M{sub {ital t}} = 175.6 {+-} 5.7 ({ital stat}) {+-} 7.1 ({ital syst.}) {ital GeV/c{sup 2}} Combining the cross sections measured with the lepton + multi-jet and dilepton data we obtain: {sigma}{sub {ital t{anti t}}} = 7.5{sup +1.9}{sub -1.6} {ital pb} A preliminary investigation of the production mechanism of the {ital t{anti t}} system is shown and compared to Standard Model expectations.

  2. Top Quark Spin Correlations at the Tevatron

    SciTech Connect

    Head, Tim; /Manchester U.

    2010-07-01

    Recent measurements of the correlation between the spin of the top and the spin of the anti-top quark produced in proton anti-proton scattering at a center of mass energy of {radical}s = 1.96 Tev by the CDF and D0 collaborations are discussed. using up to 4.3 fb{sup -1} of data taken with the CDF and D0 detectors the spin correlation parameter C, the degree to which the spins are correlated, is measured in dileptonic and semileptonic final states. The measurements are found to be in agreement with Standard Model predictions.

  3. On the fate of the Standard Model at finite temperature

    NASA Astrophysics Data System (ADS)

    Rose, Luigi Delle; Marzo, Carlo; Urbano, Alfredo

    2016-05-01

    In this paper we revisit and update the computation of thermal corrections to the stability of the electroweak vacuum in the Standard Model. At zero temperature, we make use of the full two-loop effective potential, improved by three-loop beta functions with two-loop matching conditions. At finite temperature, we include one-loop thermal corrections together with resummation of daisy diagrams. We solve numerically — both at zero and finite temperature — the bounce equation, thus providing an accurate description of the thermal tunneling. Assuming a maximum temperature in the early Universe of the order of 1018 GeV, we find that the instability bound excludes values of the top mass M t ≳ 173 .6 GeV, with M h ≃ 125 GeV and including uncertainties on the strong coupling. We discuss the validity and temperature-dependence of this bound in the early Universe, with a special focus on the reheating phase after inflation.

  4. Finite and Gauge-Yukawa unified theories: Theory and predictions

    SciTech Connect

    Kobayashi, T.; Kubo, J.; Mondragon, M.; Zoupanos, G.

    1999-10-25

    All-loop Finite Unified Theories (FUTs) are very interesting N=1 GUTs in which a complete reduction of couplings has been achieved. FUTs realize an old field theoretical dream and have remarkable predictive power. Reduction of dimensionless couplings in N=1 GUTs is achieved by searching for renormalization group invariant (RGI) relations among them holding beyond the unification scale. Finiteness results from the fact that there exists RGI relations among dimensionless couplings that guarantee the vanishing of the {beta}- functions in certain N=1 supersymmetric GUTS even to all orders. Recent developments in the soft supersymmetry breaking (SSB) sector of N=1 GUTs and FUTs lead to exact RGI relations also in this sector of the theories. Of particular interest is a RGI sum rule for the soft scalar masses holding to all orders. The characteristic features of SU(5) models that have been constructed based on the above tools are: a) the old agreement of the top quark prediction with the measured value remains unchanged, b) the lightest Higgs boson is predicted to be around 120 GeV, c) the s-spectrum starts above several hundreds of GeV.

  5. Approximate Approaches to the One-Dimensional Finite Potential Well

    ERIC Educational Resources Information Center

    Singh, Shilpi; Pathak, Praveen; Singh, Vijay A.

    2011-01-01

    The one-dimensional finite well is a textbook problem. We propose approximate approaches to obtain the energy levels of the well. The finite well is also encountered in semiconductor heterostructures where the carrier mass inside the well (m[subscript i]) is taken to be distinct from mass outside (m[subscript o]). A relevant parameter is the mass…

  6. Top differential cross section measurements (Tevatron)

    SciTech Connect

    Jung, Andreas W.

    2012-01-01

    Differential cross sections in the top quark sector measured at the Fermilab Tevatron collider are presented. CDF used 2.7 fb{sup -1} of data and measured the differential cross section as a function of the invariant mass of the t{bar t} system. The measurement shows good agreement with the standard model and furthermore is used to derive limits on the ratio {kappa}/M{sub Pl} for gravitons which decay to top quarks in the Randall-Sundrum model. D0 used 1.0 fb{sup -1} of data to measure the differential cross section as a function of the transverse momentum of the top-quark. The measurement shows a good agreement to the next-to-leading order perturbative QCD prediction and various other standard model predictions.

  7. Top of the hill.

    PubMed

    Lubell, Jennifer

    2009-08-24

    With healthcare reform the hottest topic in Washington (and at congressional town halls) this summer, it's no surprise President Barack Obama tops our 100 Most Powerful People in Healthcare ranking, joined by plenty of other power players on the Hill. "Clearly, the president is pushing hard on his goals to expand access to care, to reform health insurance and to control costs," says LifePoint's Bill Carpenter. PMID:19731430

  8. Studies of top quark properties at the Tevatron

    SciTech Connect

    Shary, Viatcheslav

    2012-05-01

    An overview of the recent measurements of the top quark properties in proton antiproton collisions at {radical}s = 1.96 TeV is presented. These measurements are based on 5.4-8.7 fb{sup -1} of data collected with the D0 and CDF experiments at the Fermilab Tevatron collider. The top quark mass and width measurements, studies of the spin correlation in top quark pair production, W boson helicity measurement, searches for anomalous top quark couplings and Lorentz invariance violation are discussed.

  9. Recent Results on Top-Quark Physics at D0

    SciTech Connect

    Bloom, Kenneth

    2015-10-23

    We present the most recent measurements on top-quark physics obtained with Tevatron $p\\bar{p}$ collisions recorded by the D0 experiment at $\\sqrt{s}= 1.96$ TeV. The full Run II data set of 9.7 fb$^{-1}$ is analyzed. Both lepton+jets and dilepton channels of top-quark pair production are used to measure the differential and inclusive cross sections, the forward-backward asymmetries, the top-quark mass, the spin correlations, and the top-quark polarization.

  10. Measurements of Top Quark Properties at the Tevatron

    SciTech Connect

    Mietlicki, David J.; /Michigan U.

    2012-04-01

    The top quark is the most recently discovered of the standard model quarks, and studies of its properties are important tests of the standard model. Many measurements of top properties have been produced by the CDF and D0 collaborations, which study top quarks produced in p{bar p} collisions at the Fermilab Tevatron with a center-of-mass energy {radical}s = 1.96 TeV. We describe recent results from top properties measurements at the Tevatron using datasets corresponding to integrated luminosities up to 8.7 fb{sup -1}.

  11. Studies of single top quark production at the Tevatron

    SciTech Connect

    Quinn, Breese; /Mississippi U.

    2011-01-01

    In this paper we present several measurements of single top quark production from the CDF and D0 experiments at the Tevatron. The various analyses utilize integrated luminosity ranging from 2.1 to 4.8 fb{sup -1}. The results include the observation of single top production with a combined cross section of 2.76{sub -0.47}{sup +0.58} pb for a top quark mass of 170 GeV/c{sup 2}, as well as measurements of top quark polarization and first evidence for t-channel production.

  12. Wedge and Flat Top

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Flat Top, the rectangular rock at right, is part of a stretch of rocky terrain in this image, taken by the deployed Imager for Mars Pathfinder (IMP) on Sol 3. Dust has accumulated on the top of Flat Top, but is not present on the sides due to the steep angles of the rock. This dust may have been placed by dust storms moving across the Martian surface. The rock dubbed 'Wedge' is at left. The objects have been studied using several different color filters on the IMP camera.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

  13. A new scoring function for top-down spectral deconvolution

    DOE PAGESBeta

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showedmore » that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.« less

  14. A new scoring function for top-down spectral deconvolution

    SciTech Connect

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showed that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.

  15. GOMA - A full-Newton finite element program for free and moving boundary problems with coupled fluid/solid momentum, energy, mass, and chemical species transport: User`s guide

    SciTech Connect

    Schunk, P.R.; Sackinger, P.A.; Rao, R.R.

    1996-01-01

    GOMA is a two- and three-dimensional finite element program which excels in analyses of manufacturing processes, particularly those involving free or moving interfaces. Specifically, the full-Newton-coupled heat, mass, momentum, and pseudo-solid mesh motion algorithm makes GOMA ideally suited for simulating processes in which the bulk fluid transport is closely coupled to the interfacial physics. Examples include, but are not limited to, coating and polymer processing flows, soldering, crystal growth, and solid-network or solution film drying. The code is based on the premise that any boundary can be (1) moving or free, with an apriori unknown position dictated by the distinguishing physics, (2) fixed, according to a global analytical representation, or (3) moving in time and space under user-prescribed kinematics. The goal is to enable the user to predict boundary position or motion simultaneously with the physics of the problem being analyzed and to pursue geometrical design studies and fluid-structure interaction problems. The moving mesh algorithm treats the entire domain as a computational Lagrangian solid that deforms subject to the physical principles which dictate boundary position. As an added benefit, the same Lagrangian solid mechanics can be exploited to solve multi-field problems for which the solid motion and stresses interact with other transport phenomena, either within the same material phase (e.g. shrinking coating) or in neighboring material phases (e.g. flexible blade coating). Thus, analyses of many fluid-structure interaction problems and deformable porous media problems are accessible. This document serves as a user`s guide and reference for GOMA and provides a brief overview of GOMA`s capabilities, theoretical background, and classes of problems for which it is targeted.

  16. Cloud top entrainment instability and cloud top distributions

    NASA Technical Reports Server (NTRS)

    Boers, Reinout; Spinhirne, James D.

    1990-01-01

    Classical cloud-top entrainment instability condition formulation is discussed. A saturation point diagram is used to investigate the details of mixing in cases where the cloud-top entrainment instability criterion is satisfied.

  17. An optimized TOPS+ comparison method for enhanced TOPS models

    PubMed Central

    2010-01-01

    Background Although methods based on highly abstract descriptions of protein structures, such as VAST and TOPS, can perform very fast protein structure comparison, the results can lack a high degree of biological significance. Previously we have discussed the basic mechanisms of our novel method for structure comparison based on our TOPS+ model (Topological descriptions of Protein Structures Enhanced with Ligand Information). In this paper we show how these results can be significantly improved using parameter optimization, and we call the resulting optimised TOPS+ method as advanced TOPS+ comparison method i.e. advTOPS+. Results We have developed a TOPS+ string model as an improvement to the TOPS [1-3] graph model by considering loops as secondary structure elements (SSEs) in addition to helices and strands, representing ligands as first class objects, and describing interactions between SSEs, and SSEs and ligands, by incoming and outgoing arcs, annotating SSEs with the interaction direction and type. Benchmarking results of an all-against-all pairwise comparison using a large dataset of 2,620 non-redundant structures from the PDB40 dataset [4] demonstrate the biological significance, in terms of SCOP classification at the superfamily level, of our TOPS+ comparison method. Conclusions Our advanced TOPS+ comparison shows better performance on the PDB40 dataset [4] compared to our basic TOPS+ method, giving 90% accuracy for SCOP alpha+beta; a 6% increase in accuracy compared to the TOPS and basic TOPS+ methods. It also outperforms the TOPS, basic TOPS+ and SSAP comparison methods on the Chew-Kedem dataset [5], achieving 98% accuracy. Software Availability The TOPS+ comparison server is available at http://balabio.dcs.gla.ac.uk/mallika/WebTOPS/. PMID:20236520

  18. Top Quark Properties in Little Higgs Models

    SciTech Connect

    Berger, C.F.; Perelstein, M.; Petriello, F.; /Wisconsin U., Madison

    2005-12-08

    Identifying the mechanism which breaks electroweak symmetry and generates fermion masses is one of the main physics goals for both the LHC and the ILC. Studies of the top quark have the potential to illuminate this issue; since it is the heaviest of the Standard Model (SM) fermions, the top is expected to couple strongly to the symmetry-breaking sector. Consequently, the structure of that sector can have significant, potentially observable effects on the properties of the top. for example, it is well known that the vector and axial t{bar t}Z form factors receive large corrections (of order 5-10%) in certain models of dynamical electroweak symmetry breaking [1]. At future colliders such as the LHC and the ILC, we will be able to pursue a program of precision top physics, similar to the program studying the Z at LEP and SLC. In this manuscript, they study the corrections to the top quark properties in ''Little Higgs'' models of electroweak symmetry breaking [2], and compare the expected deviations from the SM predictions with expected sensitivities of experiments at the LHC and the ILC. In the Little Higgs models, electroweak symmetry is driven by the radiative effects from the top sector, including the SM-like top and its heavy counterpart, a TeV-scale ''heavy top'' T. Probing this structure experimentally is quite difficult. While the LHC should be able to discover the T quark, its potential for studying its couplings is limited [3,4]. Direct production of the T will likely be beyond the kinematic reach of the ILC. However, we will show below that the corrections to the gauge couplings of the SM top, induced by its mixing with the T, will be observable at the ILC throughout the parameter range consistent with naturalness. Measuring these corrections will provide a unique window on the top sector of the Little Higgs. Many Little Higgs models have been proposed in the literature. We will consider two examples in this study, the ''Littlest Higgs'' model [5], and its

  19. Top-quark processes at NLO in production and decay

    SciTech Connect

    Campbell, John M.; Ellis, R.Keith

    2012-04-01

    We describe the implementation of top production and decay processes in the parton-level Monte Carlo program MCFM. By treating the top quark as being on-shell, we can factorize the amplitudes for top-pair production, s-channel single-top production, and t-channel single-top production into the product of an amplitude for production and an amplitude for decay. In this way we can retain all spin correlations. Both the production and the decay amplitudes are calculated consistently at next-to-leading order in alpha_s. The full dependence on the b-quark mass is also kept. Phenomenological results are presented for various kinematic distributions at the LHC and for the top quark forward-backward asymmetry at the Tevatron.

  20. Underestimation of Deep Convective Cloud Tops by Thermal Imagery

    NASA Technical Reports Server (NTRS)

    Sherwood, Steven C.; Chae, Jung-Hyo; Minnis, Patrick; McGill, Matthew

    2004-01-01

    The most common method of ascertaining cloud heights from space is from thermal brightness temperatures. Deep cumulus clouds of high water content are expected to radiate as black bodies. Here, cloud tops are estimated from several sensors: GOES-8, the Moderate Resolution Imaging Spectroradiometer (MODIS), the Moderate resolution Imaging Sensor (MISR), and the Goddard Cloud Physics Lidar (CPL), all collected during the CRYSTAL Florida Area Cirrus Experiment (CRYSTAL-FACE). Thermally derived cloud tops are consistently approx. 1km too low compared with independent measurements, no matter how thick the clouds are, even when the finite optical extinctions near cloud top and in thin overlying cirrus are taken into account. The bias appears to get worse for the tallest clouds. Cloud material is often present 2 km or more above the apparent cloud top. This mysterious discrepancy appears to be satellite-independent.

  1. Top physics at the Tevatron Collider

    SciTech Connect

    Margaroli, Fabrizio; /Purdue U.

    2007-10-01

    The top quark has been discovered in 1995 at the CDF and DO experiments located in the Tevatron ring at the Fermilab laboratory. After more than a decade the Tevatron collider, with its center-of-mass energy collisions of 1.96 TeV, is still the only machine capable of producing such exceptionally heavy particle. Here I present a selection of the most recent CDF and DO measurements performed analyzing {approx} 1 fb{sup -1} of integrated luminosity.

  2. Charm, beauty and top at HERA

    NASA Astrophysics Data System (ADS)

    Behnke, O.; Geiser, A.; Lisovyi, M.

    2015-09-01

    Results on open charm and beauty production and on the search for top production in high-energy electron-proton collisions at HERA are reviewed. This includes a discussion of relevant theoretical aspects, a summary of the available measurements and measurement techniques, and their impact on improved understanding of QCD and its parameters, such as parton density functions and charm- and beauty-quark masses. The impact of these results on measurements at the LHC and elsewhere is also addressed.

  3. Complex decay chains of top and bottom squarks

    NASA Astrophysics Data System (ADS)

    Eckel, Jonathan; Su, Shufang; Zhang, Huanian

    2015-07-01

    Current searches for the top squark mostly focus on the decay channels of or , leading to tt/bbWW + [InlineMediaObject not available: see fulltext.] final states for top squark pair production at the LHC. In supersymmetric scenarios with light gauginos other than the neutralino lightest supersymmetric particle (LSP), different decay modes of the top squark could be dominant, which significantly weaken the current top squark search limits at the LHC. Additionally, new decay modes offer alternative discovery channels for top squark searches. In this paper, we study the top squark and bottom squark decay in the Bino-like LSP case with light Wino or Higgsino next-to-LSPs (NLSPs), and identify cases in which additional decay modes become dominant. We also perform a collider analysis for top squark pair production with mixed top squark decay final states of , leading to the bbbbjjℓ + [InlineMediaObject not available: see fulltext.] collider signature. The branching fraction for such decay varies between 25% and 50% for a top squark mass larger than 500 GeV with M 2 = M 1 + 150 GeV. At the 14 TeV LHC with 300 fb-1 integrated luminosity, the top squark can be excluded up to about 1040 GeV at the 95% C.L., or be discovered up to 940 GeV at 5 σ significance.

  4. Top quark production dynamics in QCD

    SciTech Connect

    Berger, E.L.; Contopanagos, H.

    1995-12-31

    A calculation of the total cross section for top quark production in hadron-hadron collisions is presented based on an all-orders perturbative resummation of initial-state gluon radiative contributions to the basic quantum chromodynamics subprocesses. Principal-value resummation is used to evaluate all relevant large threshold contributions. In this method there are no arbitrary infrared cutoffs, and the perturbative regime of applicability is well defined, two attributes that significantly reduce the estimated uncertainty of the results. For p{bar p} collisions at center-of-mass energy {radical}s = 1.8 TeV and a top mass of 175 GeV, we obtain {sigma}(t{bar t}) = 5.52{sup +0.07}{sub {minus}0.45}pb, in agreement with experiment. Predicted cross sections are provided as a function of top mass in p{bar p} collisions at {radical}s = 2.0 TeV and in pp at CERN LHC energies.

  5. Measurement of top quark pair production cross section in proton antiproton collisions at center of mass energy 1.96TeV in the tau+ jets final state using 1fb-1 of data

    NASA Astrophysics Data System (ADS)

    Hossain, Sohrab

    This dissertation presents a new measurement of pp¯ → tt¯X production at s = 1.96 TeV using 974.2 pb-1 of data collected with the DO detector between 2002 and 2006. We focus on the final state where the W boson from one of the top quarks decays into a tau lepton and its associated neutrino, while the other W boson decays into a quark-antiquark pair. We aim to select those events in which the tau lepton subsequently decays hadronically, meaning to one or three charged hadrons, zero or more neutral hadrons and a tau neutrino (the charge conjugate processes are implied in all of the above). The observable signature thus consists of a narrow calorimeter shower with associated track(s) characteristic of a hadronic tau decay, four or more jets, of which two are initiated by b quarks accompanying the W's in the top quark decays, and a large net missing momentum in the transverse plane due to the energetic neutrino-antineutrino pair that leave no trace in the detector media. The preliminary result for the measured cross section is: stt= 6.9+1.2-1.2 stat +0.8-0.7 syst +/-0.4lumi pb. This indicates that our finding is consistent with the Standard Model prediction.

  6. Top quark physics at CDF

    SciTech Connect

    Potamianos, Karolos

    2011-12-01

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions analyzed by the CDF collaboration. The large number of top quark events analyzed, of the order of several thousands, allows stringent checks of the standard model predictions. Also, the top quark is widely believed to be a window to new physics. We present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  7. PREFACE: 5th International Workshop on Top Quark Physics (TOP2012)

    NASA Astrophysics Data System (ADS)

    Salamanna, G.; Boisvert, V.; Cerrito, L.; Khan, A.; Moretti, S.; Owen, M.; Schwanenberger, C.

    2013-07-01

    The 5th International Workshop on Top Quark Physics (TOP 2012) took place in Winchester, UK, from the 16-21 September. It gathered students as well as people active in the top quark sector and provided a framework to highlight the newest results and matters related to top quark physics. Discovered in 1995, the top quark is the sixth and heaviest of all quarks, and it is the only one with a lifetime short enough to be observed 'naked'. This makes it an important testing ground in the search for new physics. In fact, the fact of its mass being so much larger than the other quarks, hints at its special role in the Higgs mechanism. For the same reason, in many models of New Physics, new heavy resonances are expected to couple mostly with top quarks. Even if no new particles are observed, the direct correlation between its angular momentum and that of its detectable decay products allows us to probe indirectly New Physics in action when top quarks are created. In this edition of the TOP conference series, for the first time, the agenda was equally balanced between 'traditional' measurements and the now vast number of searches for physics BSM in the top quark sector, thanks mostly to the amount of data collected at the LHC in its Run I. New results were presented by both the Tevatron and the LHC collaborations: improved ttbar and single top cross-section measurements, refined techniques to measure the top quark mass and a large number of results on properties such as spin correlation and W boson polarization in top quark decays were shown. More technical discussions on the experimental issues, both from the detector and the simulation side also took place, drawing together experimentalists and theorists. Reviews of the latest results on ttbar asymmetry both from CDF and D0 and from ATLAS and CMS were shown, and theorists active in the field made some interesting points on this hot topic. Additionally, results on the search for fourth generation fermions and new

  8. A measurement of the top quark's charge

    SciTech Connect

    Unalan, Zeynep Gunay; /Michigan State U.

    2007-11-01

    The top quark was discovered in 1995 at the Fermilab National Accelerator Laboratory (Fermilab). One way to confirm if the observed top quark is really the top quark posited in the Standard Model (SM) is to measure its electric charge. In the Standard Model the top quark is the isospin partner of the bottom quark and is expected to have a charge of +2/3. However, an alternative 'exotic' model has been proposed with a fourth generation exotic quark that has the same characteristics, such as mass, as our observed top but with a charge of -4/3. This thesis presents the first CDF measurement of the top quark's charge via its decay products, a W boson and a bottom quark, using {approx} 1 fb{sup -1} of data. The data were collected by the CDF detector from proton anti-proton (p{bar p}) collisions at {radical}s = 1.96 TeV at Fermilab. We classify events depending on the charges of the bottom quark and associated W boson and count the number of events which appear 'SM-like' or 'exotic-like' with a SM-like event decaying as t {yields} W{sup +}b and an exotic event as t {yields} W{sup -}b. We find the p-value under the Standard Model hypothesis to be 0:35 which is consistent with the Standard Model. We exclude the exotic quark hypothesis at an 81% confidence level, for which we have chosen a priori that the probability of incorrectly rejecting the SM would be 1%. The calculated Bayes Factor (BF) is 2 x Ln(BF)=8.54 which is interpreted as the data strongly favors the Standard Model over the exotic quark hypothesis.

  9. Monojetlike Searches for Top Squarks with a b Tag.

    PubMed

    Ferretti, Gabriele; Franceschini, Roberto; Petersson, Christoffer; Torre, Riccardo

    2015-05-22

    The LHC searches for light compressed top squarks have resulted in considerable bounds in the case where the top squark decays to a neutralino and a charm quark. However, in the case where the top squark decays to a neutralino, a bottom quark, and two fermions via an off-shell W boson, there is currently a significant unconstrained region in the top-squark-neutralino mass plane, still allowing for top squark masses in the range 90-140 GeV. In this Letter we propose a new monojetlike search for light top squarks, optimized for the four-body decay mode, in which at least one b-tagged jet is required. We show that, by using the existing 8 TeV LHC data set, such a search would cover the entire unconstrained region. Moreover, in the process of validating our tools against an ATLAS monojet search, we show that the existing limit can be extended to exclude also top squark masses below 100 GeV. PMID:26047220

  10. Tops and Writhing DNA

    NASA Astrophysics Data System (ADS)

    Samuel, Joseph; Sinha, Supurna

    2011-04-01

    The torsional elasticity of semiflexible polymers like DNA is of biological significance. A mathematical treatment of this problem was begun by Fuller using the relation between link, twist and writhe, but progress has been hindered by the non-local nature of the writhe. This stands in the way of an analytic statistical mechanical treatment, which takes into account thermal fluctuations, in computing the partition function. In this paper we use the well known analogy with the dynamics of tops to show that when subjected to stretch and twist, the polymer configurations which dominate the partition function admit a local writhe formulation in the spirit of Fuller and thus provide an underlying justification for the use of Fuller's "local writhe expression" which leads to considerable mathematical simplification in solving theoretical models of DNA and elucidating their predictions. Our result facilitates comparison of the theoretical models with single molecule micromanipulation experiments and computer simulations.

  11. QUARKONIUM AT FINITE TEMPERATURE.

    SciTech Connect

    UMEDA, T.

    2006-06-09

    Lattice QCD studies on charmonium at finite temperature are presented After a discussion about problems for the Maximum Entropy Method applied to finite temperature lattice QCD, I show several results on charmonium spectral functions. The 'wave function' of charmonium is also discussed to study the spatial correlation between quark and anti-quark in deconfinement phase.

  12. Top-of-Rail lubricant

    SciTech Connect

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  13. Bacteriophage cell lysis of Shiga toxin-producing Escherichia coli for top-down proteomic identification of Shiga toxin 1 & 2 using matrix-assisted laser desorption/ionization tandem time-of-light mass spectrometry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    RATIONALE: Analysis of bacteria by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) often relies upon sample preparation methods that result in cell lysis, e.g. bead-beating. However, Shiga toxin-producing Escherichia coli (STEC) can undergo bacteriophage...

  14. Status of the DO top search

    SciTech Connect

    Li-Demarteau, Q.; DO Collaboration

    1994-09-01

    Preliminary new results on the top quark search with the DO experiment in {bar p}p collisions at {radical}s = 1.8 TeV for an integrated luminosity of 15.2 {plus_minus} 1.8 pb{sup {minus}1} are reported. In this new analysis, which is optimized for high mass top search, a total of seven candidate events in the electron and muon dilepton decay channels (t{bar t} {yields} e{mu}, ee and {mu}{mu}), single lepton decay channels (t{bar t} {yields} e + jets and t{bar t} {yields} {mu} + jets) without b tagging and single electron decay channel (t{bar t} {yields} e + jets) with b tagging have been observed. The estimated background is 4.7 {plus_minus} 1.0 events. If we assume the top quark has a mass of 180 GeV/c{sup 2}, a t{bar t} production cross section of 3.2 {plus_minus} 3.9 pb with upper limit of 13 pb at 95% C.L. is obtained.

  15. Top of Olympus Mons

    NASA Technical Reports Server (NTRS)

    2003-01-01

    MGS MOC Release No. MOC2-455, 17 August 2003

    Olympus Mons is considered to be the largest and tallest volcano in the Solar System. This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) picture shows the western summit region of Olympus Mons. This area is at an elevation just over 20 km (12 mi) above the 0 km martian datum. The bright feature on the right (east) side of the image is the uppermost wall of the caldera (collapse pit) at the top of the volcano. This image shows a lava flow that was cut by the pit walls when the caldera collapse occurred. Below (south of) the lava flow is a narrow channel formed by lava at some time in the distant past. This view of the summit region of Olympus Mons is located near 10.6oN, 134.0oW. The area shown is about 7.9 km (4.9 mi) across. Sunlight illuminates the scene from the right.

  16. Dark matter on top

    SciTech Connect

    Gómez, M.A.; Jackson, C.B.; Shaughnessy, G. E-mail: chris@uta.edu

    2014-12-01

    We consider a simplified model of fermionic dark matter which couples exclusively to the right-handed top quark via a renormalizable interaction with a color-charged scalar. We first compute the relic abundance of this type of dark matter and investigate constraints placed on the model parameter space by the latest direct detection data. We also perform a detailed analysis for the production of dark matter at the LHC for this model. We find several kinematic variables that allow for a clean signal extraction and we show that the parameter space of this model will be well probed during LHC Run-II. Finally, we investigate the possibility of detecting this type of dark matter via its annihilations into gamma rays. We compute the continuum and the line emission (which includes a possible ''Higgs in Space!'' line) and its possible discovery by future gamma-ray telescopes. We find that the annihilation spectrum has distinctive features which may distinguish it from other models.

  17. Hybrid LBM-MRT model coupled with finite difference method for double-diffusive mixed convection in rectangular enclosure with insulated moving lid

    NASA Astrophysics Data System (ADS)

    Bettaibi, Soufiene; Kuznik, Frédéric; Sediki, Ezeddine

    2016-02-01

    This paper presents a numerical study of thermosolutal mixed convection in rectangular enclosure with sliding top lid. The fluid flow is solved by the multiple relaxation time (MRT) lattice Boltzmann method (LBM), whereas the temperature and concentration fields are computed by finite difference method (FDM). The main objective of this study is to investigate the accuracy and the effectiveness of such model to predict thermodynamics for heat and mass transfer in a driven cavity. This model is validated with different numerical methods in the current literature. A good agreement is obtained between our results and previous works. The different comparisons demonstrate the robustness and the accuracy of the proposed approach.

  18. Top of the Top 100: First Professional Degrees.

    ERIC Educational Resources Information Center

    Black Issues in Higher Education, 1999

    1999-01-01

    Salutes the professional schools that have most consistently appeared at the top of the journal's annual ranking of Top 100 graduate and professional schools for granting the most degrees to African Americans. Included are five institutions granting the most first professional degrees in medicine and the 10 law schools. (CH)

  19. The heavy top quark and supersymmetry

    SciTech Connect

    Hall, L.J. |

    1996-05-08

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the standard model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the standard model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  20. The heavy top quark and supersymmetry

    SciTech Connect

    Hall, L.J. |

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  1. Top cross section measurement at CDF

    SciTech Connect

    Compostella, Gabriele; /INFN, CNAF /Padua U.

    2010-01-01

    This paper describes the latest measurements of the t{bar t} pair production cross section performed by the CDF Collaboration analyzing p{bar p} collisions at a center-of-mass energy of 1.96 TeV from Fermilab Tevatron, as presented at the XVIII International Workshop on Deep-Inelastic Scattering and Related Subjects. In order to test Standard Model predictions, several analysis methods are explored and all the top decay channels are considered, to better constrain the properties of the top quark and to search for possible sources of new physics affecting the pair production mechanism. Experimental results using an integrated luminosity up to 5.1 fb{sup -1} are presented.

  2. Top properties and rare decays from the Tevatron

    SciTech Connect

    Quadt, Arnulf; /Bonn U. /Rochester U.

    2005-09-01

    The top quark is the most recently discovered quark. Relatively little is known about its properties so far. Due to its very large mass of about 175 GeV/c{sup 2}, the top quark behaves differently from all other quarks and provides a unique environment for tests of the Standard Model. Furthermore, it is believed to yield sensitivity to physics beyond the Standard Model. This report discusses the latest measurements and studies of top quark properties and rare decays from the Tevatron in Run II.

  3. Measurements of top quark production and properties at the Tevatron

    SciTech Connect

    Bartos, P.

    2014-09-15

    In this letter, we summarize the latest results of the top-quark production and properties at the Tevatron. We do not include results of the top-quark mass and single top-quark production as they were presented in separate talks. The results of the measurements are mostly consistent with the standard-model predictions. However, by looking at the production asymmetry measured by CDF, one can see a discrepancy in both, $t\\bar{t}$ inclusive and lepton-based measurements. D\\O\\ results of production asymmetry are compatible with the standard-model predictions as well as with the CDF results.

  4. The CDF top search in the multijet decay mode

    SciTech Connect

    Denby, B.; CDF Collaboration

    1994-01-01

    A status report on the CDF top search in the multijet channel is given. After topological cuts and the requirement of a secondary vertex in the silicon microvertex detector, about 120 events remain (21.4 pb{sup {minus}1}), in which the signal to background ratio (for a nominal top mass of 160 GeV) is estimated to be 1/10. With further improvements it should be possible to improve this ratio to 1/1 while retaining good efficiency for top, which will make the multijet channel an important cross check for the leptonic modes.

  5. Observation of $t$-channel electroweak top quark production

    SciTech Connect

    Triplett, Nathan

    2011-01-01

    The top quark is the heaviest known fundamental particle, with a mass of 172.0+0.9-1.3GeV. This is nearly twice the mass of the second heaviest known particle, the Z boson, and roughly the mass of a gold atom. Because of its unusually large mass, studying the top quark may provide insight into the Higgs mechanism and other beyond the standard model physics. Only two accelerators in the world are powerful enough to produce top quarks. The Tevatron, which first accelerated protons in 1983, has produced almost 400,000 top quarks, roughly half at each of its two detectors: DO and CDF. The LHC is a much newer accelerator which currently has accumulated about 0.5% as much data as the Tevatron. However, when running at full luminosity, the LHC is capable of producing a top quark about once every second and will quickly surpass the Tevatron as the leading producer of top quarks. This analysis uses data from the DØ detector at the Tevatron, which are described in chapter 3. Top quarks are produced most often in pairs of top and anti-top quarks through an interaction of the strong force. This production mode was first observed in 1995 at the Tevatron. However, top quarks can also be produced though an electroweak interaction, which produces just one top quark. This production mode was first observed at the Tevatron in 2008. Single top quark production can occur in different channels. In this analysis, a measurement of the cross section of the t-channel production mode is performed. This measurement uses 5.4 fb-1 of data and uses the technique of boosted decision trees in order to separate signal from background events. The t-channel cross section is measured to be: σ(p$\\bar{p}$ → tqb + X) = 3.03+0.78-0.66 pb (0.0.1). Additional cross section measurements were also performed for the s-channel as well as the s + t-channel. The measurement of each one of these three cross sections was repeated three times using

  6. Constraints on anomalous top quark couplings at the LHC

    SciTech Connect

    Rizzo, T.G.

    1996-09-01

    Measurements of distributions associated with the pair production of top quarks at the LHC can be used to constrain (or observe) the anomalous chromomagnetic dipole moment(k) of the top. For example, using either the tt(bar) invariant mass or the Pt distribution of top we find that sensitivities to ; k; of order 0.05 are obtainable with 100 /fb of integrated luminosity. This is similar in magnitude to what can be obtained at a 500 GeV NLC with an integrated luminosity of 50 /fb through an examination of the e(+)e(-) right arrow tt(bar)g process.

  7. Top marine predators track Lagrangian coherent structures

    PubMed Central

    Tew Kai, Emilie; Rossi, Vincent; Sudre, Joel; Weimerskirch, Henri; Lopez, Cristobal; Hernandez-Garcia, Emilio; Marsac, Francis; Garçon, Veronique

    2009-01-01

    Meso- and submesoscales (fronts, eddies, filaments) in surface ocean flow have a crucial influence on marine ecosystems. Their dynamics partly control the foraging behavior and the displacement of marine top predators (tuna, birds, turtles, and cetaceans). In this work we focus on the role of submesoscale structures in the Mozambique Channel in the distribution of a marine predator, the Great Frigatebird. Using a newly developed dynamic concept, the finite-size Lyapunov exponent (FSLE), we identified Lagrangian coherent structures (LCSs) present in the surface flow in the channel over a 2-month observation period (August and September 2003). By comparing seabird satellite positions with LCS locations, we demonstrate that frigatebirds track precisely these structures in the Mozambique Channel, providing the first evidence that a top predator is able to track these FSLE ridges to locate food patches. After comparing bird positions during long and short trips and different parts of these trips, we propose several hypotheses to understand how frigatebirds can follow these LCSs. The birds might use visual and/or olfactory cues and/or atmospheric current changes over the structures to move along these biologic corridors. The birds being often associated with tuna schools around foraging areas, a thorough comprehension of their foraging behavior and movement during the breeding season is crucial not only to seabird ecology but also to an appropriate ecosystemic approach to fisheries in the channel. PMID:19416811

  8. Top marine predators track Lagrangian coherent structures.

    PubMed

    Tew Kai, Emilie; Rossi, Vincent; Sudre, Joel; Weimerskirch, Henri; Lopez, Cristobal; Hernandez-Garcia, Emilio; Marsac, Francis; Garçon, Veronique

    2009-05-19

    Meso- and submesoscales (fronts, eddies, filaments) in surface ocean flow have a crucial influence on marine ecosystems. Their dynamics partly control the foraging behavior and the displacement of marine top predators (tuna, birds, turtles, and cetaceans). In this work we focus on the role of submesoscale structures in the Mozambique Channel in the distribution of a marine predator, the Great Frigatebird. Using a newly developed dynamic concept, the finite-size Lyapunov exponent (FSLE), we identified Lagrangian coherent structures (LCSs) present in the surface flow in the channel over a 2-month observation period (August and September 2003). By comparing seabird satellite positions with LCS locations, we demonstrate that frigatebirds track precisely these structures in the Mozambique Channel, providing the first evidence that a top predator is able to track these FSLE ridges to locate food patches. After comparing bird positions during long and short trips and different parts of these trips, we propose several hypotheses to understand how frigatebirds can follow these LCSs. The birds might use visual and/or olfactory cues and/or atmospheric current changes over the structures to move along these biologic corridors. The birds being often associated with tuna schools around foraging areas, a thorough comprehension of their foraging behavior and movement during the breeding season is crucial not only to seabird ecology but also to an appropriate ecosystemic approach to fisheries in the channel. PMID:19416811

  9. Learning at the Top. Symposium.

    ERIC Educational Resources Information Center

    2002

    This document contains three papers from a symposium on learning at the top that was conducted as part of a conference on human resource development (HRD). "Learning at the Top: An Investigation of Nonprofit CEOs' (Chief Executive Officers') Learning Experiences" (John J. Sherlock) reports on a study that used Mezirow's theory of adult learning as…

  10. Search for a heavy top t' to Wq in top events

    SciTech Connect

    Cox, David

    2009-10-01

    We present a search for a massive quark (t{prime}) decaying to Wq and thus mimicking the top quark decay signature in data collected by the CDF II detector corresponding to 2.8 fb{sup -1}. We use the reconstructed mass of the t{prime} quark and the scalar sum of the transverse energies in the event to discriminate possible new physics from Standard Model processes, and set limits on a standard 4th generation t{prime} quark.

  11. Studies of the top quark with the D0 detector

    SciTech Connect

    Stephens, R.W.; D0 Collaboration

    1996-01-01

    The observation of the top quark by the D0 experiment, at Fermilab`s Tevatron proton-antiproton collider, is briefly reviewed. The analysis of the top quark mass in the lepton plus jets decay channels, resulting in m{sub t} {approx} 200 GeV/c{sup 2} is reviewed; and a preliminary mass analysis from the dilepton decay channels resulting in m{sub t} = 145 {plus_minus} 25 (statistical) {plus_minus} 20 (systematic) GeV/c{sup 2} is presented. These mass measurements are compared with Standard Model limits from CERN`s LEP experiments and the published CDF measurement. Preliminary observation of top quark-W boson correlation is shown.

  12. Competition for finite resources

    NASA Astrophysics Data System (ADS)

    Cook, L. Jonathan; Zia, R. K. P.

    2012-05-01

    The resources in a cell are finite, which implies that the various components of the cell must compete for resources. One such resource is the ribosomes used during translation to create proteins. Motivated by this example, we explore this competition by connecting two totally asymmetric simple exclusion processes (TASEPs) to a finite pool of particles. Expanding on our previous work, we focus on the effects on the density and current of having different entry and exit rates.

  13. Uncovering the single top: Observation of electroweak top quark production

    NASA Astrophysics Data System (ADS)

    Benitez, Jorge Armando

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as "Single Top." Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element Vtb, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb-1 of Data collected with the DO detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: spp→tb+X,tqb+X =3.74+0.95-0.74pb, 1 where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10-6. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: spp→tb+X,tqb+X =3.94+/-0.88pb, 2 and the corresponding measurement significance is 5.0 standard deviations.

  14. Search for top and bottom squarks

    SciTech Connect

    C. Rott

    2003-10-15

    Searches for the lightest scalar top quark {bar t}{sub 1} and scalar bottom quark {bar b}{sub 1} performed at LEP2 with a center-of-mass energy of up to {radical}s = 209 GeV and at Tevatron using data collected at {radical}s = 1.8 TeV during Run I and at {radical}s = 1.96 TeV during Run II, are discussed. Different possible decay modes were considered and no evidence for any such signal was observed. Exclusion limits were extracted.

  15. Finiteness of the vacuum energy density in quantum electrodynamics

    NASA Astrophysics Data System (ADS)

    Manoukian, Edward B.

    1983-03-01

    Recent interest in the finiteness problem of the vacuum energy density (VED) in finite QED has motivated us to reexamine this problem in the light of an analysis we have carried out earlier. By a loopwise summation procedure, supplemented by a renormalization-group analysis, we study the finiteness of the VED with α, the renormalized fine-structure constant, fixed in the process as the (infinite order) zero of the eigenvalue condition F[1](x)|x=α=0∞, and with the electron mass totally dynamical of origin. We propose a possible finite solution for the VED in QED which may require only one additional eigenvalue condition for α.

  16. Critical top tension for static equilibrium configuration of a steel catenary riser

    NASA Astrophysics Data System (ADS)

    Athisakul, Chainarong; Klaycham, Karun; Chucheepsakul, Somchai

    2014-12-01

    This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser (SCR) by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser's vertical distances, horizontal offsets, riser's weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.

  17. Searches for New Physics in Top-like Final States

    NASA Astrophysics Data System (ADS)

    Tzeng, Yeng-Ming

    2013-11-01

    We present searches for massive top and bottom quark partners at CMS using data collected at √s = 7 and 8 TeV. Such partners are incorporated in 4th generation models, or can be found in other models, able to solve the Hierarchy problem and stabilize the Higgs mass. Other searches presented here focus on excited states of composite heavy objects that decay to top quarks and jets. The searches span a range of final states, from multi-leptonic to entirely hadronic, and limits are set on mass and production cross sections as a function of branching ratios.

  18. Method for establishing a combustion zone in an in situ oil shale retort having a pocket at the top

    DOEpatents

    Cha, Chang Y.

    1980-01-01

    An in situ oil shale retort having a top boundary of unfragmented formation and containing a fragmented permeable mass has a pocket at the top, that is, an open space between a portion of the top of the fragmented mass and the top boundary of unfragmented formation. To establish a combustion zone across the fragmented mass, a combustion zone is established in a portion of the fragmented mass which is proximate to the top boundary. A retort inlet mixture comprising oxygen is introduced to the fragmented mass to propagate the combustion zone across an upper portion of the fragmented mass. Simultaneously, cool fluid is introduced to the pocket to prevent overheating and thermal sloughing of formation from the top boundary into the pocket.

  19. Observation of Single Top Quark Production

    SciTech Connect

    Gerber, Cecilia E.; /Illinois U., Chicago

    2009-09-01

    The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at {radical}s = 1.96 Tev using 2.3 fb{sup -1} of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} {yields} tb + X, tqb + X is 3.94 {+-} 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10{sup -7}, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 {+-} 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.

  20. Top quark physics at the Tevatron

    SciTech Connect

    Antonio Sidoti

    2004-03-17

    After the successful Run I of the Tevatron (1992-1996),with the top quark discovery, both CDF and D0 experiments were extensively upgraded to meet the challenges of the Tevatron Run II collider. The energy of p{bar p} collisions at the Tevatron was increased from {radical}s = 1.8 TeV to {radical}s = 1.96 TeV. t{bar t} production cross section is expected to increase by a factor of {approx} 30%. Major upgrades in the Tevatron accelerator chain will increase the Run II instantaneous luminosity: the goal is to achieve L = 5 - 20 x 10{sup 31} cm{sup 2}s{sup -1} while the highest luminosity reached up to now (September 2003) is 5.2 x 10{sup 31} cm{sup 2} s{sup -1}. In this paper we will present the top quark properties measured by both CDF and D0 with the first physics-quality data collected during the Run II (March 2002-January 2003). First we will review t{bar t} cross section measurements in the various decay channels; then top quark mass measurements will be presented.

  1. Top Quarks and the High Energy Frontier

    NASA Astrophysics Data System (ADS)

    Canelli, Florencia

    2006-04-01

    One of the still missing pieces of the Standard Model of particle physics is the Higgs boson, providing a mechanism to generate the masses of the particles. Furthermore, there is strong indication that the Standard Model is merely the low energy limit of a more fundamental theory which could manifest itself near the TeV scale. This talk will explore aspects of experimentation at the High Energy frontier, starting from experience at the Tevatron accelerator currently providing the world's highest energy particle collisions. In particular, a precision measurement of the top quark mass using the Collider Detector at Fermilab (CDF) will be presented. An outlook will be given towards a direct search for the Higgs boson and New Physics at the LHC and beyond, concluding with a historic perspective.

  2. Forum outlines top emerging technologies

    NASA Astrophysics Data System (ADS)

    Extance, Andy

    2015-04-01

    Additive manufacturing, next-generation robotics, "sense and avoid" drones that fly themselves, artificial intelligence and "neuromorphic" computing have all made it into the World Economic Forum's top 10 emerging technologies for 2015.

  3. Australia's Next Top Fraction Model

    ERIC Educational Resources Information Center

    Gould, Peter

    2013-01-01

    Peter Gould suggests Australia's next top fraction model should be a linear model rather than an area model. He provides a convincing argument and gives examples of ways to introduce a linear model in primary classrooms.

  4. Finite-dimensional calculus

    NASA Astrophysics Data System (ADS)

    Feinsilver, Philip; Schott, René

    2009-09-01

    We discuss topics related to finite-dimensional calculus in the context of finite-dimensional quantum mechanics. The truncated Heisenberg-Weyl algebra is called a TAA algebra after Tekin, Aydin and Arik who formulated it in terms of orthofermions. It is shown how to use a matrix approach to implement analytic representations of the Heisenberg-Weyl algebra in univariate and multivariate settings. We provide examples for the univariate case. Krawtchouk polynomials are presented in detail, including a review of Krawtchouk polynomials that illustrates some curious properties of the Heisenberg-Weyl algebra, as well as presenting an approach to computing Krawtchouk expansions. From a mathematical perspective, we are providing indications as to how to implement infinite terms Rota's 'finite operator calculus'.

  5. Finite-Temperature Micromagnetism

    SciTech Connect

    Skomski, R; Kumar, P; Hadjipanayis, GC; Sellmyer, DJ

    2013-07-01

    It is investigated how magnetic hysteresis is affected by finite-temperature excitations, using soft regions in hard-magnetic matrices as model systems. In lowest order, magnetization processes are described by the traditional approach of using finite-temperature materials constants such as K-1(T). Nanoscale excitations are usually small perturbations. For example, a Bloch summation over all magnon wave vectors shows that remanence is slightly enhanced, because long-wavelength excitations are suppressed. However, a reverse magnetic field enhances the effect of thermal excitations and causes a small reduction of the coercivity. To describe such effects, we advocate micromagnetic calculations where finite-temperature fluctuations are treated as small corrections to the traditional approach, as contrasted to full-scale Monte Carlo simulations.

  6. Top 10 Products of 2011

    ERIC Educational Resources Information Center

    American School & University, 2011

    2011-01-01

    In 2011, American School & University (AS&U) showcased some of the hottest products in the industry. This article presents the top ten most requested products as determined by readers. The top one on the list is the Bulb crusher which can cut recycling costs by 50%, can hold 1,350 4-foot lamps in a single 55-gallon drum, can crush a 4-foot lamp in…

  7. Defining the Entrainment Zone in Stratocumulus-topped Boundary Layers

    NASA Astrophysics Data System (ADS)

    Wang, Q.; Zhou, M.; Kalogiros, J. A.; Lenschow, D. H.; Dai, C.; Wang, S.

    2010-12-01

    The presence of an entrainment zone near the top of the stratocumulus-topped boundary layers has been identified by many early studies. However, the definition of the entrainment zone was rather vague. We have examined the fine vertical variations of cloud liquid water content, wind, temperature and humidity near the stratocumulus top and developed a new method to identify the entrainment zone objectively. Aircraft measurements from various field projects in stratocumulus-topped boundary layers are used, taking advantage of the fast sampling capability of many of the aircraft sensors. Because of the inhomogeneous mixing of two air masses with distinctively different thermodynamic properties, the magnitude of temperature perturbations within the entrainment zone is significantly larger than those above or below. This characteristics is used to define the upper and lower boundaries of the entrainment zone using a wavelet spectra analyses. The definition of the entrainment zone is further evaluated by the presence of a linear mixing line through mixing line analyses. Various other interfaces at the cloud top are also examined, including the cloud interface, temperature interface (inversion), and moisture interface. The heights of these interfaces are examined relative to the height of the entrainment zone. This study also systematically revealed the presence of turbulence above the local cloud top and/or above the entrainment zone. Wind shear near the cloud top is one possible source that generated local turbulence. Other potential sources of turbulence will also be discussed.

  8. Uncovering the single top: observation of electroweak top quark production

    SciTech Connect

    Benitez, Jorge Armando

    2009-01-01

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as 'Single Top'. Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element Vtb, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb-1 of Data collected with the D0 detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: (1) σ(p$\\bar{p}$→ tb + X, tqb + X) = 3.74-0.74+0.95 pb, where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10-6. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: (2) σ(p$\\bar{p}$ → tb + X, tqb + X) = 3.94 ± 0.88 pb, and the corresponding measurement significance is 5.0 standard deviations.

  9. Spin-one top partner: phenomenology

    NASA Astrophysics Data System (ADS)

    Collins, Jack H.; Jain, Bithika; Perelstein, Maxim; Lorier, Nicolas Rey-Le

    2014-08-01

    Cai, Cheng, and Terning (CCT) suggested a model in which the left-handed top quark is identified with a gaugino of an extended gauge group, and its superpartner is a spin-1 particle. We perform a phenomenological analysis of this model, with a focus on the spin-1 top partner, which we dub the "swan". We find that precision electroweak fits, together with direct searches for Z ' bosons at the LHC, place a lower bound of at least about 4.5 TeV on the swan mass. An even stronger bound, 10 TeV or above, applies in most of the parameter space, mainly due to the fact that the swan is typically predicted to be significantly heavier than the Z '. We find that the 125 GeV Higgs can be easily accommodated in this model with non-decoupling D-terms. In spite of the strong lower bound on the swan mass, we find that corrections to Higgs couplings to photons and gluons induced by swan loops are potentially observable at future Higgs factories. We also briefly discuss the prospects for discovering a swan at the proposed 100 TeV pp collider.

  10. GOMA 6.0 : a full-Newton finite element program for free and moving boundary problems with coupled fluid/solid momentum, energy, mass, and chemical species transport : user%3CU%2B2019%3Es guide.

    SciTech Connect

    Schunk, Peter Randall; Rao, Rekha Ranjana; Chen, Ken Shuang; Labreche, Duane A.; Sun, Amy Cha-Tien; Hopkins, Matthew Morgan; Moffat, Harry K.; Roach, Robert Allen; Hopkins, Polly L.; Notz, Patrick K.; Roberts, Scott Alan; Sackinger, Philip A.; Subia, Samuel Ramirez; Wilkes, Edward Dean; Baer, Thomas A.; Noble, David R.; Secor, Robert B.

    2013-07-01

    Goma 6.0 is a finite element program which excels in analyses of multiphysical processes, particularly those involving the major branches of mechanics (viz. fluid/solid mechanics, energy transport and chemical species transport). Goma is based on a full-Newton-coupled algorithm which allows for simultaneous solution of the governing principles, making the code ideally suited for problems involving closely coupled bulk mechanics and interfacial phenomena. Example applications include, but are not limited to, coating and polymer processing flows, super-alloy processing, welding/soldering, electrochemical processes, and solid-network or solution film drying. This document serves as a user's guide and reference.

  11. SW New Mexico Oil Well Formation Tops

    DOE Data Explorer

    Shari Kelley

    2015-10-21

    Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.

  12. Automatic finite element generators

    NASA Technical Reports Server (NTRS)

    Wang, P. S.

    1984-01-01

    The design and implementation of a software system for generating finite elements and related computations are described. Exact symbolic computational techniques are employed to derive strain-displacement matrices and element stiffness matrices. Methods for dealing with the excessive growth of symbolic expressions are discussed. Automatic FORTRAN code generation is described with emphasis on improving the efficiency of the resultant code.

  13. Observation of top quark production using kinematic techniques

    SciTech Connect

    Kim, Shinhong; CDF Collaboration

    1995-05-17

    We present analysis results of the top quark production using kinematic techniques in p{bar p} collisions at {radical}s = 1.8 TeV with the Collider Detector at Fermilab (CDF). We analyzed a data sample corresponding to an integrated luminosity of 67 pb{sup {minus}1}. First, we compare the kinematic properties, the second and third leading jet E{sub T} of W+ > 3 jet events with expectations for t{bar t} production and its back-ground processes, predominantly direct W + jet production. The probability that backgrounds fake the excess in the signal region was found to be less than 0.26%. Next, we use a scaler sum of the transverse energies of the lepton, neutrino and jets in W+{ge}4 jet events. This analysis shows t{bar t} events exist significantly in the event sample, and enables us to estimate the top quark mass to be M{sub top} = 180 {plus_minus} 12 {sub {minus}15}{sup +19} GeV/c{sup 2}. Finally, we analyse the dijet invariant mass in the W+{ge}4 jet events. It shows a significant mass peak consistent with a mass peak of W decaying into dijet. From these results and counting experiment, we have confirmed previous evidence reported in 1994 April and observed top quark production.

  14. Discriminating top-antitop resonances using azimuthal decay correlations

    NASA Astrophysics Data System (ADS)

    Baumgart, Matthew; Tweedie, Brock

    2011-09-01

    Top-antitop pairs produced in the decay of a new heavy resonance will exhibit spin correlations that contain valuable coupling information. When the tops decay, these correlations imprint themselves on the angular patterns of the final quarks and leptons. While many approaches to the measurement of top spin correlations are known, the most common ones require detailed kinematic reconstructions and are insensitive to some important spin interference effects. In particular, spin-1 resonances with mostly-vector or mostly-axial couplings to top cannot be easily discriminated from one another without appealing to mass-suppressed effects or to more model-dependent interference with continuum Standard Model production. Here, we propose to probe the structure of a resonance's couplings to tops by measuring the azimuthal angles of the tops' decay products about the production axis. These angles exhibit modulations which are typically O(0.1-1), and which by themselves allow for discrimination of spin-0 from higher spins, measurement of the CP-phase for spin-0, and measurement of the vector/axial composition for spins1and 2. For relativistic tops, the azimuthal decay angles can be well-approximated without detailed knowledge of the tops' velocities, and appear to be robust against imperfect energy measurements and neutrino reconstructions. We illustrate this point in the highly challenging dileptonic decay mode, which also exhibits the largest modulations. We comment on the relevance of these observables for testing axigluon-like models that explain the top quark A FB anomaly at the Tevatron, through direct production at the LHC.

  15. Nonlinear, finite deformation, finite element analysis

    NASA Astrophysics Data System (ADS)

    Nguyen, Nhung; Waas, Anthony M.

    2016-06-01

    The roles of the consistent Jacobian matrix and the material tangent moduli, which are used in nonlinear incremental finite deformation mechanics problems solved using the finite element method, are emphasized in this paper, and demonstrated using the commercial software ABAQUS standard. In doing so, the necessity for correctly employing user material subroutines to solve nonlinear problems involving large deformation and/or large rotation is clarified. Starting with the rate form of the principle of virtual work, the derivations of the material tangent moduli, the consistent Jacobian matrix, the stress/strain measures, and the objective stress rates are discussed and clarified. The difference between the consistent Jacobian matrix (which, in the ABAQUS UMAT user material subroutine is referred to as DDSDDE) and the material tangent moduli ( C e ) needed for the stress update is pointed out and emphasized in this paper. While the former is derived based on the Jaumann rate of the Kirchhoff stress, the latter is derived using the Jaumann rate of the Cauchy stress. Understanding the difference between these two objective stress rates is crucial for correctly implementing a constitutive model, especially a rate form constitutive relation, and for ensuring fast convergence. Specifically, the implementation requires the stresses to be updated correctly. For this, the strains must be computed directly from the deformation gradient and corresponding strain measure (for a total form model). Alternatively, the material tangent moduli derived from the corresponding Jaumann rate of the Cauchy stress of the constitutive relation (for a rate form model) should be used. Given that this requirement is satisfied, the consistent Jacobian matrix only influences the rate of convergence. Its derivation should be based on the Jaumann rate of the Kirchhoff stress to ensure fast convergence; however, the use of a different objective stress rate may also be possible. The error associated

  16. A multidimensional finite element method for CFD

    NASA Technical Reports Server (NTRS)

    Pepper, Darrell W.; Humphrey, Joseph W.

    1991-01-01

    A finite element method is used to solve the equations of motion for 2- and 3-D fluid flow. The time-dependent equations are solved explicitly using quadrilateral (2-D) and hexahedral (3-D) elements, mass lumping, and reduced integration. A Petrov-Galerkin technique is applied to the advection terms. The method requires a minimum of computational storage, executes quickly, and is scalable for execution on computer systems ranging from PCs to supercomputers.

  17. Computing Gravitational Fields of Finite-Sized Bodies

    NASA Technical Reports Server (NTRS)

    Quadrelli, Marco

    2005-01-01

    A computer program utilizes the classical theory of gravitation, implemented by means of the finite-element method, to calculate the near gravitational fields of bodies of arbitrary size, shape, and mass distribution. The program was developed for application to a spacecraft and to floating proof masses and associated equipment carried by the spacecraft for detecting gravitational waves. The program can calculate steady or time-dependent gravitational forces, moments, and gradients thereof. Bodies external to a proof mass can be moving around the proof mass and/or deformed under thermoelastic loads. An arbitrarily shaped proof mass is represented by a collection of parallelepiped elements. The gravitational force and moment acting on each parallelepiped element of a proof mass, including those attributable to the self-gravitational field of the proof mass, are computed exactly from the closed-form equation for the gravitational potential of a parallelepiped. The gravitational field of an arbitrary distribution of mass external to a proof mass can be calculated either by summing the fields of suitably many point masses or by higher-order Gauss-Legendre integration over all elements surrounding the proof mass that are part of a finite-element mesh. This computer program is compatible with more general finite-element codes, such as NASTRAN, because it is configured to read a generic input data file, containing the detailed description of the finiteelement mesh.

  18. Vortex-induced vibration of a circular cylinder of finite length

    NASA Astrophysics Data System (ADS)

    Zhao, Ming; Cheng, Liang

    2014-01-01

    Vortex-induced vibration (VIV) of a rigid circular cylinder of finite length subject to uniform steady flow is investigated numerically. The study is focused on the effect of the free end on the response of the cylinder. The vibration of the cylinder is confined only in the cross-flow direction. Three-dimensional Navier-Stokes equations are solved by the Petrov-Galerkin finite element method and the equation of the motion is solved for the cylinder displacement. Simulations are conducted for a constant mass ratio of 2, a constant Reynolds number of 300 and cylinder length to diameter ratios of L/D = 1, 2, 5 10, and 20. It is found that the vortex shedding in the wake of a fixed cylinder is suppressed if the cylinder length is less than 2 cylinder diameters. However, if the cylinder is allowed to vibrate, VIV happens at L/D = 1 and 2 and the response amplitudes at these two cylinder lengths are comparable with that of a 2D-cylinder. The vortices that are shed from a short cylinder of L/D = 1 and 2 are found to be generated from the free-end of the cylinder and convected toward the top end of the cylinder by the upwash velocity. They are found to be nearly perpendicular to the cylinder span. The wake flow in a vibrating cylinder with L/D greater than 5 includes the vortex shedding flow at the top part of the cylinder and the end-induced vortex shedding near the free-end of the cylinder. The phase difference between the sectional lift coefficient and the vibration displacement near the free-end of the cylinder changes from 0° to 180° at higher reduced velocity than that near the top end. Strong variation of the flow along the cylinder span occurs at reduced velocities where the lift coefficient near the free-end and that near the top end are in anti-phase with each other.

  19. Consider topped crude for FCC

    SciTech Connect

    Louder, K.E.; Juno, E.J.; Kulapaditharom, L.

    1985-09-01

    A case study is presented that illustrates the mechanics for evaluating use of topped crude to load the FCC for more profit. Declining product demands combined with high crude costs has shut down many refineries and left others operting well below design capacity. The study illustrates the step-by-step requirements to debottleneck an existing Kellogg Orthoflow Model B FCC to process topped crude mixed with gas oils. This study was limited to the catalytic converter defined as the reactor, regenerator, air blower, and wet gas compressor. The scope was to examine the ability to process topped crude and to consider modernizing the FCC to employ riser cracking and complete CO combustion regeneration.

  20. Top-flat and top-patterned cone gratings for mid-infrared antireflective properties

    NASA Astrophysics Data System (ADS)

    Brückner, Jean-Baptiste; Le Rouzo, Judikaël.; Escoubas, Ludovic; Flory, François; Simon, Jean-Jacques; Berginc, Gérard

    2013-03-01

    Achieving a broadband antireflection property from material surfaces is one of the highest priorities for those who want to improve the efficiency of solar cells or the sensitivity of photo-detectors. To lower the reflectance of a surface, we have decided to study the optical response of a top-flat cone shaped silicon grating, based on previous work exploring pyramid gratings. Through rigorous numerical methods, such as Finite Different Time Domain or Rigorous Coupled-Wave Analysis, we then designed several structures theoretically demonstrating an antireflective character within the middle infrared region. From the opto-geometrical parameters such as period, depth and shape of the pattern determined by numerical analysis, these structures have been fabricated using controlled slope plasma etching processes. Afterwards, optical characterizations of several samples were carried out. The reflectance of the grating in the near and middle infrared domains has been measured by Fourier Transform Infrared spectrometry and a comparison with numerical analysis has been made. As expected, those structures offer a fair antireflective character in the region of interest. Further numerical investigations led to the fact that patterning the top of the cone could enlarge the antireflective domain to the visible region. Thus, as with the simple cone grating, a comparison of the numerical analysis with the experimental measurements is made. Finally, diffracted orders are studied and compared between both structures. Those orders are critical and must be limited as one wants to avoid crosstalk phenomena in imaging systems.

  1. Top Quark Spin Correlations - Theory

    SciTech Connect

    Parke, Stephen J.; /Fermilab

    2012-02-01

    The top quark decay width (G{sub F}m{sub t}{sup 3} {approx} 1 GeV) is much larger than the QCD hadronization scale ({Lambda}{sub QCD} {approx} 0.1 GeV) and much larger than the spin decorrelation scale ({Lambda}{sub QCD}{sup 2}/m{sub t} {approx} 0.1 MeV). Therefore, spin correlations in top quark pair production are reflected in angular correlations of the decay products, see [1] and [2].

  2. Top Compositeness and Precision Unification

    NASA Astrophysics Data System (ADS)

    Agashe, Kaustubh; Contino, Roberto; Sundrum, Raman

    2005-10-01

    The evolution of standard model gauge couplings is studied in a nonsupersymmetric scenario in which the hierarchy problem is resolved by Higgs compositeness above the weak scale. It is argued that massiveness of the top quark combined with precision tests of the bottom quark imply that the right-handed top must also be composite. If, further, the standard model gauge symmetry is embedded into a simple subgroup of the unbroken composite-sector flavor symmetry, then precision coupling unification is shown to occur at ˜1015GeV, to a degree comparable to supersymmetric unification.

  3. TOPS attitude propulsion subsystem technology

    NASA Technical Reports Server (NTRS)

    Moynihan, P. I.

    1971-01-01

    The thermoelectric outer-planet spacecraft (TOPS) attitude propulsion subsystem effort is summarized. It includes the tradeoff rationale that went into the selection of anhydrous hydrazine as the propellant, and a brief description of three types of 0.445-N (100-mlbf) thrusters that were purchased for in-house evaluation. A discussion is also included of the 0.2224-N (50-mlbf)-developed thrusters and their integration with a portable, completely enclosed, propulsion module that was designed and developed to support the TOPS single-axis attitude control tests in the celestarium.

  4. Finite Element Analysis Code

    Energy Science and Technology Software Center (ESTSC)

    2006-03-08

    MAPVAR-KD is designed to transfer solution results from one finite element mesh to another. MAPVAR-KD draws heavily from the structure and coding of MERLIN II, but it employs a new finite element data base, EXODUS II, and offers enhanced speed and new capabilities not available in MERLIN II. In keeping with the MERLIN II documentation, the computational algorithms used in MAPVAR-KD are described. User instructions are presented. Example problems are included to demonstrate the operationmore » of the code and the effects of various input options. MAPVAR-KD is a modification of MAPVAR in which the search algorithm was replaced by a kd-tree-based search for better performance on large problems.« less

  5. Top pair production at a future e + e - machine in a composite Higgs scenario

    NASA Astrophysics Data System (ADS)

    Barducci, D.; De Curtis, S.; Moretti, S.; Pruna, G. M.

    2015-08-01

    The top quark plays a central role in many New Physics scenarios and in understanding the details of Electro-Weak Symmetry Breaking. In the short- and mid-term future, top-quark studies will mainly be driven by the experiments at the Large Hadron Collider. Exploration of top quarks will, however, be an integral part of particle physics studies at any future facility and an e + e - collider will have a very comprehensive top-quark physics program. We discuss the possibilities of testing NP in the top-quark sector within a composite Higgs scenario through deviations from the Standard Model in top pair production for different Centre-of-Mass energy options of a future e + e - machine. In particular, we focus on precision studies of the top-quark sector at a CM energy ranging from 370 GeV up to 3 TeV.

  6. Accurate Finite Difference Algorithms

    NASA Technical Reports Server (NTRS)

    Goodrich, John W.

    1996-01-01

    Two families of finite difference algorithms for computational aeroacoustics are presented and compared. All of the algorithms are single step explicit methods, they have the same order of accuracy in both space and time, with examples up to eleventh order, and they have multidimensional extensions. One of the algorithm families has spectral like high resolution. Propagation with high order and high resolution algorithms can produce accurate results after O(10(exp 6)) periods of propagation with eight grid points per wavelength.

  7. Observation of the top quark with the DO detector

    SciTech Connect

    Hadley, N.J.

    1997-01-01

    The DO Collaboration reports on the observation of the top quark in p{bar p} collisions at {radical}s = 1.8 TeV at the Fermilab Tevatron. We measure the top quark mass to be 199{sub -21}{sup -19}(stat){sub -21}{sup +14}(syst.) GeV/c{sup 2} and its production cross section to be 6.4 {+-}2.2 pb. Our result is based on approximately 50 pb{sup -1} of data. We observe 17 events with an expected background of 3.8 {+-} 0.6 events. The probability of an upward fluctuation of the background to produce the observed signal is 2 x 10{sup -6} (equivalent to 4.6 standard deviations). The kinematic properties of the events are consistent with top quark decay, and the distribution of events across the seven decay channels is consistent with the Standard Model top quark branching fractions. We describe the analysis that led to the observation of the top quark as well as the properties of the top quark events.

  8. Spin Measurement in Top Quark Events at the LHC

    SciTech Connect

    Linacre, Jacob

    2015-01-01

    Measurements of polarisation and spin correlations are presented in events with top quarks produced in pp collisions at the LHC. The data correspond to integrated luminosities of $5 fb^{-1}$ at $\\sqrt{s}$ = 7 TeV and 20 $fb^{-1}$ at $\\sqrt{s}$ = 8 TeV collected with the ATLAS and CMS detectors. The top quark polarization is measured in both single top quark production in the t-channel and $t\\bar{t}$ pair-production, from the angular distributions of charged leptons in the rest frame of their parent top quark. The spin correlations are measured in $t\\bar{t}$ events using various angular distributions of the decay products. The measurements are made using both template fitting methods and by unfolding the distributions to the parton-level, where differential measurements with respect to the invariant mass, rapidity, and transverse momentum of the $t\\bar{t}$ system are also made. The spin correlation measurements are used to search for new physics in the form of a light top squark or an anomalous top quark chromo-magnetic dipole moment. All measurements are found to be in agreement with predictions of the standard model.

  9. Observation of the top quark with the D0 detector

    SciTech Connect

    Hadley, N.J.

    1995-11-01

    The D0 collaboration reports on the observation of top quark in p{bar p} collisions at {radical}{bar s} = 1.8 TeV at the Fermilab Tevatron. We measure the top quark mass to be 199{sub -21}{sup +19}(stat.){sub -21}{sup +14}(syst.) GeV/c{sup 2} and its production cross section to be 6.4 {+-} 2.2 pb. Our result is based on approximately 50 pb{sup -1} of data. We observe 17 events with an expected background of 3.8 {+-} 0.6 events. The probability of an upward fluctuation of the background to produce the observed signal is 2 x 10{sup -6} (equivalent to 4.6 standard deviations). The kinematic properties of the events are consistent with top quark decay, and the distribution of events across the seven decay channels is consistent with the Standard Model top quark branching fractions. We describe the analysis that led to the observation of the top quark as well as the properties of the top quark events.

  10. Dynamics of a cliff top dune

    NASA Astrophysics Data System (ADS)

    Rasmussen, K. R.

    2012-12-01

    Morphological changes during more than 100 years have been investigated for a cliff-top dune complex at Rubjerg at the Danish North Sea coast. Here the lower 50 m of the cliff front is composed of Pleistocene steeply inclined floes of silt and clay with coarse sand in between which gives it a saw-tooth appearance. On top of this the dunes are found for several kilometres along the coastline. Due to erosion by the North Sea the cliff has retreated about 120 m between approximately 1880 and 1970 as indicated from two national surveys, and recent GPS-surveys indicate that erosion is continuing at a similar rate. Nevertheless the cliff top dune complex has survived, but its morphology has undergone some changed. The old maps indicate that around 1880 the dune complex was composed of several up to about 20 m high dunes streamlined in the East-West direction which is parallel to the prevailing wind direction. When protective planting started during the first half of the 20th Century the cliff top dunes gradually merged together forming a narrow, tall ridge parallel to the shore line with the highest part reaching about 90 m near 1970. In 1993 the highest points along the ridge was almost 95 m high, but then the protective planting was considerably reduced and recent annual GPS-surveys indicate that the dunes respond quickly to this by changing their morphology towards the original appearance. It is remarkable that despite the mass wasting caused by the constant erosion of the cliff front the dunes have remained more or less intact. Theoretical studies of hill flow indicate given the proper geometry of the cliff then suspension of even coarse grains can be a very effective agent for carrying sand from the exposed parts of the cliff front to and beyond the cliff-top. Mostly the sand grains are deposited within some hundred meters downwind of the cliff dune while silt is often carried more than 10 km inland. Field observations indicate that where the dislodged floes and

  11. Training Top 10 Hall of Fame

    ERIC Educational Resources Information Center

    Training, 2012

    2012-01-01

    Microsoft Corporation and SCC Soft Computer are the newest inductees into the Training Top 10 Hall of Fame, joining the ranks of the 11 companies named to the hall since its inception in 2008 (Wyeth Pharmaceuticals subsequently was acquired by Pfizer Inc. in 2009). These 11 companies held Top 10 spots in the Training Top 50, Top 100, and now Top…

  12. Search for Charged Higgs in Top Quark Decays at CDF

    SciTech Connect

    Yu Geumbong

    2008-11-23

    We present a direct search result for a charged Higgs boson in lepton+jets tt-bar events using 2.2 fb{sup -1} data collected by CDF II detector. The charged Higgs boson is predicted to decay into cs-bar in low tan {beta} in the MSSM if its mass is smaller than the top quark. Looking for a second peak from the di-jet invariant mass in decays of top quark, there is observed no evidence of anomalous boson. We place the upper limits on the br(t{yields}H{sup +}b) = 0.1{approx}0.3 with 95% C.L. depending on the charged Higgs mass.

  13. Kowalevski top in quantum mechanics

    SciTech Connect

    Matsuyama, A.

    2013-09-15

    The quantum mechanical Kowalevski top is studied by the direct diagonalization of the Hamiltonian. The spectra show different behaviors depending on the region divided by the bifurcation sets of the classical invariant tori. Some of these spectra are nearly degenerate due to the multiplicity of the invariant tori. The Kowalevski top has several symmetries and symmetry quantum numbers can be assigned to the eigenstates. We have also carried out the semiclassical quantization of the Kowalevski top by the EBK formulation. It is found that the semiclassical spectra are close to the exact values, thus the eigenstates can be also labeled by the integer quantum numbers. The symmetries of the system are shown to have close relations with the semiclassical quantum numbers and the near-degeneracy of the spectra. -- Highlights: •Quantum spectra of the Kowalevski top are calculated. •Semiclassical quantization is carried out by the EBK formulation. •Quantum states are labeled by the semiclassical integer quantum numbers. •Multiplicity of the classical torus makes the spectra nearly degenerate. •Symmetries, quantum numbers and near-degenerate spectra are closely related.

  14. Top 100--Graduate Degree Producers

    ERIC Educational Resources Information Center

    Borden, Victor M. H.

    2009-01-01

    The Top 100 degree tables published in this edition of Diverse, and the many more detailed tables included on the Diverse Web site, delineate the institutions that have conferred the most master's, doctoral and first professional degrees to students of color in academic year 2007-2008. Each table shows the number of degrees for a specific minority…

  15. The Top 100: Associate Rankings

    ERIC Educational Resources Information Center

    Blackmon, Olivia

    2009-01-01

    This year, Diverse has added a new addition to its annual Top 100 degree producers series--recognizing, with this edition, the institutions that award the most associate degrees to students of color. More than half of minority undergraduate students start their degree quest at a community college with 55 percent of all Hispanic and Native American…

  16. [Top five neonatal articles 2015].

    PubMed

    Flamant, C; Fischer Fumeaux, C J

    2016-09-01

    This review includes five randomized controlled trials, published in the Medline database in 2015, which were selected by the Scientific commission of the French society of neonatology, taking into account their influence in perinatology. This selection was presented during the specific "Top five" session in the French congress of neonatal research. PMID:27431853

  17. Race to Top Applications Scrutinized

    ERIC Educational Resources Information Center

    Sawchuk, Stephen; Maxwell, Lesli A.

    2010-01-01

    As peer reviewers for the U.S. Department of Education begin to comb through the thousands of pages of applications for $4 billion in federal Race to the Top Fund grants, they'll be under pressure to determine which are most worthy of funding: those that promise the most, or those with the best chance of delivering. In a competition whose criteria…

  18. "Top School Problems" Are Myths.

    ERIC Educational Resources Information Center

    Males, Mike

    1992-01-01

    A well-known "study" comparing the top school problems of 1940 (talking and gum chewing) with those of 1987 (drug abuse, pregnancy, and violence) is nonexistent. In 1940, 49 percent of all youth did not finish high school, 37,000 teenagers died from violence or disease, and 335,000 teens gave birth. Educators should discount pastoral memories and…

  19. The Top STEM Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    This article presents a list of the top Science, Technology, Engineering, and Mathematics (STEM) degree producers in the U.S. This list is broken down into seven categories: (1) Total Minority Research/Scholarship and Other Doctoral: Mathematics and Statistics; (2) Total Minority Bachelors: Biological and Biomedical Sciences; (3) Total Minority…

  20. The Top Theological Degree Producers

    ERIC Educational Resources Information Center

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    Each year, "Diverse: Issues in Higher Education" publishes a list of the Top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M. H. Borden, professor of educational leadership and policy studies at Indiana University Bloomington. This year, for the first time, it has…