76 FR 19746 - Approval for Subzone Expansion and Expansion of Manufacturing Authority; Foreign-Trade Subzone...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

... and Expansion of Manufacturing Authority; Foreign-Trade Subzone 29F; Hitachi Automotive Systems Americas, Inc. (Automotive Components); Harrodsburg, KY Pursuant to its authority under the Foreign-Trade... on behalf of Hitachi Automotive Systems Americas, Inc. (Hitachi), operator of Subzone 29F at the...

Development of the Phase-up Technology of the Radio Telescopes: 6.7 GHz Methanol Maser Observations with Phased Hitachi 32 m and Takahagi 32 m Radio Telescopes

NASA Astrophysics Data System (ADS)

Takefuji, K.; Sugiyama, K.; Yonekura, Y.; Saito, T.; Fujisawa, K.; Kondo, T.

2017-11-01

For the sake of high-sensitivity 6.7 GHz methanol maser observations, we developed a new technology for coherently combining the two signals from the Hitachi 32 m radio telescope and the Takahagi 32 m radio telescope of the Japanese Very long baseline interferometer Network (JVN), where the two telescopes were separated by about 260 m. After the two telescopes were phased as a twofold larger single telescope, the mean signal-to-noise ratio (S/N) of the 6.7 GHz methanol masers observed by the phased telescopes was improved to 1.254-fold higher than that of the single dish, through a very long baseline interferometry (VLBI) experiment on the 50 km baseline of the Kashima 34 m telescope and the 1000 km baseline of the Yamaguchi 32 m telescope. Furthermore, we compared the S/Ns of the 6.7 GHz maser spectra for two methods. One is a VLBI method and the other is the newly developed digital position switching that is a similar technology to that used in noise-canceling headphones. Finally, we confirmed that the mean S/N of method of the digital position switching (ON-OFF) was 1.597-fold higher than that of the VLBI method.

Naratriptan in the Prophylactic Treatment of Cluster Headache.

PubMed

Ito, Yasuo; Mitsufuji, Takashi; Asano, Yoshio; Shimazu, Tomokazu; Kato, Yuji; Tanahashi, Norio; Maruki, Yuichi; Sakai, Fumihiko; Yamamoto, Toshimasa; Araki, Nobuo

2017-10-01

Objective Naratriptan has been reported to reduce the frequency of cluster headache. The purpose of this study was to determine whether naratriptan is effective as a prophylactic treatment for cluster headache in Japan. Methods We retrospectively reviewed all 43 patients with cluster headache who received preventive treatment with naratriptan from April 2009 to April 2015. The International Classification of Headache Disorders, 3rd Edition (beta version) (ICHD-3 beta) was used to diagnose cluster headache. This study was conducted at 3 centers (Department of Neurology, Saitama Medical University; Saitama Neuropsychiatric Institute; Saitama Medical University International Medical Center). Patients were recruited from these specialized headache outpatient centers. Naratriptan was taken before the patient went to bed. Results The study population included 30 men (69.8%) and 13 women (30.2%). Twenty-two cases received other preventive treatments (51.2%), while 21 cases only received naratriptan (48.8%). Among the 43 cases, 37 patients (86.0%) achieved an improvement of cluster headache on naratriptan. Conclusion Naratriptan has been suggested as a preventive medicine for cluster headache because of the longer the biological half-life in comparison to other triptans. The internal use of naratriptan 2 hours before attacks appears to achieve a good response in patients with cluster headache.

75 FR 36447 - Notice of Availability of Draft Environmental Impact Statement and Public Meetings for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

... Statement and Public Meetings for the General Electric-Hitachi Global Laser Enrichment, LLC Proposed Laser... the proposed General Electric-Hitachi (GEH) Global Laser Enrichment (GLE) Uranium Enrichment Facility... to locate the facility on the existing General Electric Company (GE) site near Wilmington, North...

77 FR 14523 - Western Digital Corporation; Analysis of Agreement Containing Consent Order to Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... of Viviti Technologies Ltd., formerly known as Hitachi Global Storage Technologies Ltd. (``HGST''), a... negotiate the purchase price of desktop HDDs at a global level. The desktop HDD market is highly... Digital'') proposed acquisition of Viviti Technologies Ltd., formerly known as Hitachi Global Storage...

75 FR 9451 - Notice of Receipt and Availability of Environmental Report Supplement 2 for the Proposed GE...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-02

... Availability of Environmental Report Supplement 2 for the Proposed GE-Hitachi Global Laser Enrichment Laser- Based Uranium Enrichment Facility On January 13, 2009, GE-Hitachi Global Laser Enrichment, LLC (GLE) was..., operation, and decommissioning of a laser-based uranium enrichment facility. The proposed facility would be...

The concentration of iodine in horse serum and its relationship with thyroxin concentration by geological difference.

PubMed

Mochizuki, Mariko; Hayakawa, Noriyuki; Minowa, Fumiko; Saito, Akihiro; Ishioka, Katsumi; Ueda, Fukiko; Okubo, Kimihiro; Tazaki, Hiroyuki

2016-04-01

In this study, iodine and thyroxin (T4) concentrations in the serum of 69 horses were investigated. Higher iodine concentrations were obtained from the horses housed in Chiba Prefecture. In contrast, T4 concentrations of horses at Shizuoka Prefecture were higher than those of horses at Chiba Prefecture. There was a significant correlation (r = 0.643, P < 0.001) between the iodine and T4 concentrations of horses at Saitama and Shizuoka prefectures. Although a significant correlation (r = 0.794, P < 0.001) was also observed in the investigation of all horses at Chiba Prefecture, the distribution area of the data was separated from the data of horses housed in Saitama and Shizuoka prefectures. A higher iodine concentration in the environment is expected in the sampling area at Chiba Prefecture. Thus, it was suggested that the concentrations of iodine in the serum of horses are influenced by geological differences. It was thought that equine serum is a useful sample for monitoring.

Contamination of meat with Campylobacter jejuni in Saitama, Japan.

PubMed

Ono, K; Yamamoto, K

1999-03-15

To determine the source of food contamination with Campylobacter jejuni, we investigated retail meat, a chicken processing plant and a broiler farm. C. jejuni was found in domestic retailed poultry (45.8%) and imported poultry (3.7%), but not in beef or pork. In the poultry processing plant, there is significant contamination with C. jejuni in chicken carcasses, equipment and workers' hands. This contamination increases during the defeathering and evisceration processes. RAPD analysis shows that contamination with C. jejuni is of intestinal origin. In a broiler farm, C. jejuni was first isolated from a faecal sample of broiler chicken after the 20th day of age. Two weeks later, all birds in this farm became C. jejuni positive. RAPD analysis indicated that C. jejuni spread rapidly from one broiler flock to the other flocks on the farm.

Bioenergetic Approaches and Inflammation of MPTP Toxicity

DTIC Science & Technology

2006-09-01

with 8 strokes of pestle A followed by 8 strokes of pestle B. The brain homogenate was centrifuged at 1250 g for 3 min; pellet was discarded and...legends to figures. Fluorescence of safranin O was measured with an F4500 fluorimeter (Hitachi, Japan ) equipped with a magnetic stirring assembly and...and 531 nm emission wavelengths with F4500 fluorimeter (Hitachi, Japan ) equipped with a magnetic stirring assembly and a thermostated cuvette holder

New Green Tea Cultivar 'Yumewakaba' which Quality is High on Aroma and Taste by Slight Half Fermentation of Leaves.

NASA Astrophysics Data System (ADS)

Uchino, Hiroshi; Honda, Yusuke; Nakajima, Kenta; Sasaki, Koji; Kobayashi, Akira; Tanaka, Eri; Kume, Nobuo; Sakai, Takashi; Shimazaki, Yutaka; Ishikawa, Iwao; Okano, Nobuo; Kyougoku, Hideo; Funakoshi, Shouji; Kitada, Kaichi; Fuchinoue, Yasumoto; Tanaka, Mankichi

New green tea cultivar‘Yumewakaba’has been bred at the Green Tea and Local Products Laboratory of Saitama Prefectural Agriculture and Forestry Research Center. The clone was crossed between‘Yabukita’and Saitama No.9’in 1968. Local adaptability, tolerance to bark split frost injury, and Blister blight were tested at 17 prefectural tea experiment stations from 1994 to 2002. It was registered as ‘Norin No.53’and named ‘Yumewakaba’in 20The characteristics of the cultivar are as follows The shape of the cultivar is erect type, and spread of tea bush is the same as‘Yabukita’.The size of mature leaves are smaller than those of ‘Yabukita’. Immature leaves are lustrougreen and soft. The rooting ability of nursery plants are high and taking roots after planting is good. The plucking time of the first crop of this cultivar in Saitama is 1 or 2 days later than that of ‘Yabukita’.‘Yumewakaba’is middle budding cultivar. The yield of 1st or 2nd crop is the same that of‘Yabukita. ‘Yumewakaba’is resistance to cold drought and bark split frost injury. Thlevel of resistance to freezing injur y is stronger than that of ‘Yabukita’ The damage Anthracnose is less than that of ‘Yabukita. The appearance is better than that of ‘Yabukita’, and the quality of liquor is the same as ‘Yabukita’. The quality of processed goods from slightly half fermented leaves of this cultivar is high on the aroma and the taste. ‘Yumewakaba’is suitable for northern tea producing areas, and cool semi-mountainousareas.

Comet C/2012 S1 (Ison)

NASA Astrophysics Data System (ADS)

Granslo, B. H.; Nakano, S.

2013-12-01

16.88 16 11 31.6 +19 45 05 0.07+ 0.14+ 15.5 Unsuccessful visual searches for the comet, with estimated limiting magnitudes: Dec. 4.26 UT, [8.0 (B. H. Granslo, Roverkollen, Oslo, Norway, 0.08-m refractor; altitude 5 degrees in twilight); Dec. 8.8, [10.6 (Akie Hashimoto, Chichibu, Saitama-ken, Japan, 25x150 binoculars; communicated by S. Nakano, Sumoto, Japan).

High Serum Phospholipid Dihomo-γ-Linoleic Acid Concentration and Low Δ5-Desaturase Activity Are Associated with Increased Risk of Type 2 Diabetes among Japanese Adults in the Hitachi Health Study.

PubMed

Akter, Shamima; Kurotani, Kayo; Sato, Masao; Hayashi, Takuya; Kuwahara, Keisuke; Matsushita, Yumi; Nakagawa, Tohru; Konishi, Maki; Honda, Toru; Yamamoto, Shuichiro; Hayashi, Takeshi; Noda, Mitsuhiko; Mizoue, Tetsuya

2017-08-01

Background: The association between the circulating fatty acid (FA) composition and type 2 diabetes (T2D) has been reported in Western populations, but evidence is scarce among Asian populations, including Japanese, who consume large amounts of fish. Objective: The objective of the present study was to prospectively examine the association between circulating concentrations of individual FAs and T2D incidence among Japanese adults. Methods: We conducted a nested case-control study in a cohort of 4754 employees, aged 34-69 y, who attended a comprehensive health checkup in 2008-2009 and donated blood samples for the Hitachi Health Study. During 5 y of follow-up, diabetes was identified on the basis of plasma glucose, glycated hemoglobin, and self-report. Two controls matched to each case by sex, age, and date of checkup were randomly chosen by using density sampling, resulting in 336 cases and 678 controls with FA measurements. GC was used to measure the FA composition in serum phospholipids. Cox proportional hazards regression was used to estimate the HRs and 95% CIs after adjusting for potential confounders. We examined the association of T2D risk with 25 different individual and combinations of FAs. Results: T2D risk was positively associated with serum dihomo-γ-linoleic acid concentration (highest compared with the lowest quartile-HR: 1.49; 95% CI: 1.04, 2.11; P- trend = 0.02) and inversely associated with Δ5-desaturase activity (highest compared with the lowest quartile-HR: 0.72; 95% CI: 0.52, 0.99; P- trend = 0.02), independent of body mass index (BMI). There were also inverse associations between T2D risk with serum total n-6 (ω-6) polyunsaturated fatty acids (PUFAs), linoleic acid, and cis -vaccenic acid, but these were attenuated and became nonsignificant after adjustment for BMI. Serum n-3 (ω-3) PUFAs and saturated fatty acids (SFAs) were not associated with T2D risk. Conclusions: T2D risk was associated with circulating concentrations of the n-6 PUFA

Comparison of Two Different Ultrasound Devices Using Strain Elastography Technology in the Diagnosis of Breast Lesions Related to the Histologic Results.

PubMed

Farrokh, André; Schaefer, Fritz; Degenhardt, Friedrich; Maass, Nicolai

2018-05-01

This study was conducted to provide evidence that elastograms of two different devices and different manufacturers using the same technical approach provide the same diagnoses. A total of 110 breast lesions were prospectively analysed by two experts in ultrasound, using the strain elastography function from two different manufacturers (Hitachi HI-RTE, Hitachi Medical Systems, Wiesbaden, Germany; and Siemens eSie Touch, Siemens Medical Systems, Erlangen, Germany). Results were compared with the histopathologic results. Applying the Bowker test of symmetry, no statistically significant difference between the two elastography functions of these two devices was found (p = 0.120). The Cohen's kappa of k = 0.591 showed moderate strength of agreement between the two elastograms. The two examiners yielded moderate strength of agreement analysing the elastograms (Hitachi HI-RTE, k = 0.478; Siemens eSie Touch, k = 0.441). In conclusion, evidence is provided that elastograms of the same lesion generated by two different ultrasound devices equipped with a strain elastography function do not significantly differ. Copyright © 2018 World Federation for Ultrasound in Medicine and Biology. Published by Elsevier Inc. All rights reserved.

Comparison of chemistry analytes between 2 portable, commercially available analyzers and a conventional laboratory analyzer in reptiles.

PubMed

McCain, Stephanie L; Flatland, Bente; Schumacher, Juergen P; Clarke Iii, Elsburgh O; Fry, Michael M

2010-12-01

Advantages of handheld and small bench-top biochemical analyzers include requirements for smaller sample volume and practicality for use in the field or in practices, but little has been published on the performance of these instruments compared with standard reference methods in analysis of reptilian blood. The aim of this study was to compare reptilian blood biochemical values obtained using the Abaxis VetScan Classic bench-top analyzer and a Heska i-STAT handheld analyzer with values obtained using a Roche Hitachi 911 chemical analyzer. Reptiles, including 14 bearded dragons (Pogona vitticeps), 4 blue-tongued skinks (Tiliqua gigas), 8 Burmese star tortoises (Geochelone platynota), 10 Indian star tortoises (Geochelone elegans), 5 red-tailed boas (Boa constrictor), and 5 Northern pine snakes (Pituophis melanoleucus melanoleucus), were manually restrained, and a single blood sample was obtained and divided for analysis. Results for concentrations of albumin, bile acids, calcium, glucose, phosphates, potassium, sodium, total protein, and uric acid and activities of aspartate aminotransferase and creatine kinase obtained from the VetScan Classic and Hitachi 911 were compared. Results for concentrations of chloride, glucose, potassium, and sodium obtained from the i-STAT and Hitachi 911 were compared. Compared with results from the Hitachi 911, those from the VetScan Classic and i-STAT had variable correlations, and constant or proportional bias was found for many analytes. Bile acid data could not be evaluated because results for 44 of 45 samples fell below the lower linearity limit of the VetScan Classic. Although the 2 portable instruments might provide measurements with clinical utility, there were significant differences compared with the reference analyzer, and development of analyzer-specific reference intervals is recommended. ©2010 American Society for Veterinary Clinical Pathology.

Self-Sustaining Thorium Boiling Water Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenspan, Ehud; Gorman, Phillip M.; Bogetic, Sandra

The primary objectives of this project are to: Perform a pre-conceptual design of a core for an alternative to the Hitachi proposed fuel-self- sustaining RBWR-AC, to be referred to as a RBWR-Th. The use of thorium fuel is expected to assure negative void coefficient of reactivity (versus positive of the RBWR-AC) and improve reactor safety; Perform a pre-conceptual design of an alternative core to the Hitachi proposed LWR TRU transmuting RBWR-TB2, to be referred to as the RBWR-TR. In addition to improved safety, use of thorium for the fertile fuel is expected to improve the TRU transmutation effectiveness; Compare themore » RBWR-Th and RBWR-TR performance against that of the Hitachi RBWR core designs and sodium cooled fast reactor counterparts - the ARR and ABR; and, Perform a viability assessment of the thorium-based RBWR design concepts to be identified along with their associated fuel cycle, a technology gap analysis, and a technology development roadmap. A description of the work performed and of the results obtained is provided in this Overview Report and, in more detail, in the Attachments. The major findings of the study are summarized.« less

Research and development of electric vehicles for clean transportation.

PubMed

Wada, Masayoshi

2009-01-01

This article presents the research and development of an electric vehicle (EV) in Department of Human-Robotics Saitama Institute of Technology, Japan. Electric mobile systems developed in our laboratory include a converted electric automobile, electric wheelchair and personal mobile robot. These mobile systems contribute to realize clean transportation since energy sources and devices from all vehicles, i.e., batteries and electric motors, does not deteriorate the environment. To drive motors for vehicle traveling, robotic technologies were applied.

The CIRP International Workshop on Concurrent Engineering for Product Realization (1st) Held in Tokyo, Japan on June 27 - 28, 1992

DTIC Science & Technology

1992-11-01

7075 Dr. Samuel K.M.HO Dept. of Engineering Warwick University Coventry CV 47 AL UK 15 Tel.(44)203 524173 Fax.(44)203 524307 Mr. Mikio Inagaki...Nishi-8, Kita-ku Sapporo 060, JAPAN Tel. +81-11-716-211 ex.6447 Fax. +81-11-758-1619 Mr. Mikio Kitano 16 Motomachi Plant Toyota Moter Corporation 1...Hirosawa 2-1, Wako, Saitama 351-01 JAPAN Tel 81-484-65-6641 Fax 81-484-67-5942 Professor Hisayoshi Sato Director, Mechanical Engineering Laboratory

Electrochemical direct immobilization of DNA sequences for label-free herpes virus detection

NASA Astrophysics Data System (ADS)

Tam, Phuong Dinh; Trung, Tran; Tuan, Mai Anh; Chien, Nguyen Duc

2009-09-01

DNA sequences/bio-macromolecules of herpes virus (5'-AT CAC CGA CCC GGA GAG GGA C-3') were directly immobilized into polypyrrole matrix by using the cyclic voltammetry method, and grafted onto arrays of interdigitated platinum microelectrodes. The morphology surface of the obtained PPy/DNA of herpes virus composite films was investigated by a FESEM Hitachi-S 4800. Fourier transform infrared spectroscopy (FTIR) was used to characterize the PPy/DNA film and to study the specific interactions that may exist between DNA biomacromolecules and PPy chains. Attempts are made to use these PPy/DNA composite films for label-free herpes virus detection revealed a response time of 60 s in solutions containing as low as 2 nM DNA concentration, and self life of six months when immerged in double distilled water and kept refrigerated.

Volatile halogenated hydrocarbons in foods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyahara, Makoto; Toyoda, Masatake; Saito, Yukio

1995-02-01

Volatile halogenated organic compounds were determined in foods. Statistical treatment of the data for 13 sampled from 20 families living in suburban Tokyo (Saitama prefecture) indicated that the foods were contaminated by water pollution and/or substances introduced by the process of food production. Butter and margarine were contaminated by chlorinated ethylene, ethane, and related compounds released by dry cleaning and other operations. Soybean sprouts and tofu (soybean curd) contained chloroform and related trihalomethanes absorbed during the production process. 27 refs., 6 figs., 5 tabs.

75 FR 21680 - GE-Hitachi Global Laser Enrichment LLC;

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Global Laser Enrichment LLC; Establishment of Atomic Safety and Licensing Board Pursuant to delegation by... is hereby given that an Atomic Safety and Licensing Board (Board) is being established to preside... comprised of the following administrative judges: Paul S. Ryerson, Chair, Atomic Safety and Licensing Board...

77 FR 20009 - Howard Hughes Medical Institute, et al.; Notice of Consolidated Decision on Applications for Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-03

... decision consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials... 07470. Instrument: Electron Microscope. Manufacturer: Hitachi High Technologies America, Inc., Japan... educational uses requiring an electron microscope. We know of no electron microscope, or any other instrument...

75 FR 61227 - Advisory Committee on Reactor Safeguards Meeting of the ACRS Subcommittee on Future Plant Designs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... Westinghouse Electric Company, General Electric--Hitachi Nuclear Energy (GEH), and their contractors, pursuant... NUCLEAR REGULATORY COMMISSION Advisory Committee on Reactor Safeguards Meeting of the ACRS Subcommittee on Future Plant Designs; Revision to the September 24, 2010, ACRS Meeting Federal Register Notice...

78 FR 52504 - Oregon Health and Science University, et al.; Notice of Consolidated Decision on Applications for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

... is a decision consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural...: 13-004. Applicant: Georgia Institute of Technology, Atlanta, GA 30332. Instrument: Electron Microscope. Manufacturer: Hitachi High-Technologies Corp., Japan. Intended Use: See notice at 78 FR 13860-61...

FIELD EVALUATION OF LOW-EMISSION COAL BURNER TECHNOLOGY ON UTILITY BOILERS VOLUME II. SECOND GENERATION LOW-NOX BURNERS

EPA Science Inventory

The report describes tests to evaluate the performance characteristics of three Second Generation Low-NOx burner designs: the Dual Register burner (DRB), the Babcock-Hitachi NOx Reducing (HNR) burner, and the XCL burner. The three represent a progression in development based on t...

76 FR 28214 - University of Wyoming, et al.; Notice of Consolidated Decision on Applications for Duty-Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-16

... consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials Importation Act of... 82072. Instrument: Electron Microscope. Manufacturer: Hitachi High- Technologies Corporation, Japan...-Technologies Corporation, Japan. Intended Use: See notice at 76 FR 20952, April 14, 2011. Docket Number: 11-024...

76 FR 48884 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ODVA, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Motion, Inc., Boulder, CO; Hitachi Cable Manchester, Inc., Manchester, NH; and Global Engineering..., Applied Robotics, Inc., Glenville, NY; WIT, St.-Laurent-Du- Var, FRANCE; Caron Engineering, Inc., Wells... Act on May 2, 2011 (76 FR 24523). Patricia A. Brink, Director of Civil Enforcement, Antitrust Division...

Oxidation of ZrB2 and ZrB2-SiC Ceramics With Tungsten Additions (Preprint)

DTIC Science & Technology

2009-02-01

evaporate. The dried powder cake was ground using an alumina mortar and pestle to form granules that were passed through a 50 mesh sieve. Cylindrical...SEM; S-570, Hitachi, Japan ) equipped with energy dispersive spectroscopy (EDS; E2V, Scientific Instruments, UK) for simultaneous chemical analysis

FBIS report. Science and technology: Japan, November 6, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-11-06

Some articles are: R&D on Microfactory Technologies; MHI Develops Low Cost, Low Noise Mid-size Helicopters; Kumamoto University to Apply for Approval to Conduct Clinical Experiment for Gene Therapy; MITI To Support Private Sector to Develop Cipher Technology; and Hitachi Electronics Develops Digital Broadcasting Camera System.

76 FR 3540 - U.S. Advanced Boiling Water Reactor Aircraft Impact Design Certification Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

.... Plain Language IX. Voluntary Consensus Standards X. Finding of No Significant Environmental Impact... information (or its equivalent) which was originally developed by GE Nuclear Energy (GE) and approved by the... from GE Hitachi Nuclear Energy (GEH) to use the GE- developed U.S. ABWR proprietary information for...

Advanced Reactor PSA Methodologies for System Reliability Analysis and Source Term Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, D.; Brunett, A.; Passerini, S.

Beginning in 2015, a project was initiated to update and modernize the probabilistic safety assessment (PSA) of the GE-Hitachi PRISM sodium fast reactor. This project is a collaboration between GE-Hitachi and Argonne National Laboratory (Argonne), and funded in part by the U.S. Department of Energy. Specifically, the role of Argonne is to assess the reliability of passive safety systems, complete a mechanistic source term calculation, and provide component reliability estimates. The assessment of passive system reliability focused on the performance of the Reactor Vessel Auxiliary Cooling System (RVACS) and the inherent reactivity feedback mechanisms of the metal fuel core. Themore » mechanistic source term assessment attempted to provide a sequence specific source term evaluation to quantify offsite consequences. Lastly, the reliability assessment focused on components specific to the sodium fast reactor, including electromagnetic pumps, intermediate heat exchangers, the steam generator, and sodium valves and piping.« less

76 FR 53980 - Request for a License To Import Radioactive Waste

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... NUCLEAR REGULATORY COMMISSION Request for a License To Import Radioactive Waste Pursuant to 10 CFR... Hitachi Nuclear Energy, LLC. Radioactive waste Up to 210 Cobalt- Recycling, China August 1, 2011, August 5, consisting of 60 sealed forensic testing 2011, IW030. used Cobalt-60 sources. or storage and radioactive...

76 FR 78096 - U.S. Advanced Boiling Water Reactor Aircraft Impact Design Certification Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... Environmental Impact: Availability IX. Paperwork Reduction Act Statement X. Regulatory Analysis XI. Regulatory.... ABWR; one commenter, GE Hitachi Nuclear Energy (GEH), was against the proposed amendment to the U.S... information from both the DCD developed by GE Nuclear Energy (GE) and the DCD developed by the STPNOC. The...

76 FR 37852 - Advisory Committee on Reactor Safeguards; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... Thursday, October 21, 2010 (74 FR 65038-65039). Wednesday, July 13, 2011, Conference Room T2-B1, 11545....: Safety Evaluation Report Associated with NEDC-33173, Supplement 2, Parts 1, 2, and 3, ``Analysis of Gamma... Electric Hitachi (GEH) regarding the safety evaluation report associated with NEDC-33173, Supplement 2...

HTA educational outreach program and change the equation participation

NASA Astrophysics Data System (ADS)

Gordon, Robert

2013-05-01

In this presentation, Hitachi High Technologies America (HTA) introduces its Educational Outreach Program and explains it's involvement with Change The Equation (CTEq), a nonprofit, nonpartisan, CEO-led initiative that is mobilizing the business community to improve the quality of science, technology, engineering and mathematics (STEM) learning in the United States.

OEM unveil new ideas for shovels and excavators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscor, S.

2006-08-15

From upgrades to new loading arrangements, vendors are looking at new ways to optimize the production process. The paper describes P & M equipment's new C series electric shovels equipped with the centurion system, Hitachi's super-sized excavator to Canadian oil sands, and Bucyrus and Siemens' engineer shovels. 3 figs., 1 photo.

CD-ROM and Libraries.

ERIC Educational Resources Information Center

Murphy, Brower

1985-01-01

The Compact Disc-Read Only Memory (CD-ROM) data format is explained and illustrated, noting current and potential applications. The "5-inch" compact laserdisc is described and photographs of an IBM PC/Hitachi CD-ROM system adopted by Library Corporation to support its MARC database--BiblioFile--are presented. Screen displays for…

Influence of combustion-originated dioxins in atmospheric deposition on water quality of an urban river in Japan.

PubMed

Minomo, Kotaro; Ohtsuka, Nobutoshi; Nojiri, Kiyoshi; Matsumoto, Rie

2018-02-01

Bulk (wet and dry) deposition samples were collected in Saitama Prefecture, Japan throughout a year (February 8, 2012 to February 7, 2013) to estimate the influence of dioxins emitting from waste incinerators on river water quality. The annual deposition flux of dioxins was 3.3ng-toxic equivalent (TEQ)/m 2 /year. Source identification using indicative congeners estimated that 82% of dioxin TEQ in the bulk deposition (2.7ng-TEQ/m 2 /year) was combustion-originated, indicating that most of the dioxins in the deposition were derived from waste incinerators. In Saitama prefecture the annual flux of combustion-originated dioxins in depositions was apparently consistent with that of dioxin emission into the air from waste incinerators. The TEQ of combustion-originated dioxins in the deposition per rainfall was 2.4pg-TEQ/L on annual average, exceeding the environmental quality standard (EQS) for water in Japan of 1pg-TEQ/L. This suggests there is a possibility that dioxins in atmospheric deposition have a significant influence on the water quality of urban rivers which rainwater directly flows into because of many paved areas in the basins. The influence of combustion-originated dioxin in the deposition on the water quality of Ayase River, an urban river heavily polluted with dioxins, was estimated at 0.29pg-TEQ/L on annual average in 2015. It seems that dioxins in atmospheric deposition from waste incinerators have a significant influence on water quality of some urban rivers via rainwater though the dioxins in the ambient air have achieved the EQS for atmosphere at all monitoring sites in Japan. Copyright © 2017. Published by Elsevier B.V.

Effect of hemoglobin- and Perflubron-based oxygen carriers on common clinical laboratory tests.

PubMed

Ma, Z; Monk, T G; Goodnough, L T; McClellan, A; Gawryl, M; Clark, T; Moreira, P; Keipert, P E; Scott, M G

1997-09-01

Polymerized hemoglobin solutions (Hb-based oxygen carriers; HBOCs) and a second-generation perfluorocarbon (PFC) emulsion (Perflubron) are in clinical trials as temporary oxygen carriers ("blood substitutes"). Plasma and serum samples from patients receiving HBOCs look markedly red, whereas those from patients receiving PFC appear to be lipemic. Because hemolysis and lipemia are well-known interferents in many assays, we examined the effects of these substances on clinical chemistry, immunoassay, therapeutic drug, and coagulation tests. HBOC concentrations up to 50 g/L caused essentially no interference for Na, K, Cl, urea, total CO2, P, uric acid, Mg, creatinine, and glucose values determined by the Hitachi 747 or Vitros 750 analyzers (or both) or for immunoassays of lidocaine, N-acetylprocainamide, procainamide, digoxin, phenytoin, quinidine, or theophylline performed on the Abbott AxSym or TDx. Gentamycin and vancomycin assays on the AxSym exhibited a significant positive and negative interference, respectively. Immunoassays for TSH on the Abbott IMx and for troponin I on the Dade Stratus were unaffected by HBOC at this concentration. Tests for total protein, albumin, LDH, AST, ALT, GGT, amylase, lipase, and cholesterol were significantly affected to various extents at different HBOC concentrations on the Hitachi 747 and Vitros 750. The CK-MB assay on the Stratus exhibited a negative interference at 5 g/L HBOC. HBOC interference in coagulation tests was method-dependent-fibrometer-based methods on the BBL Fibro System were free from interference, but optical-based methods on the MLA 1000C exhibited interferences at 20 g/L HBOC. A 1:20 dilution of the PFC-based oxygen carrier (600 g/L) caused no interference on any of these chemistry or immunoassay tests except for amylase and ammonia on the Vitros 750 and plasma iron on the Hitachi 747.

Evaluation of NGAL TestTM on Cobas 6000.

PubMed

Hansen, Young B L; Damgaard, Anette; Poulsen, Jørgen H

2014-01-01

Neutrophil Gelatinase-Associated Lipocalin (NGAL) is a promising biomarker for acute kidney injury (AKI). Our objectives were to evaluate the NGAL Test(TM) from Bioporto for both urine NGAL and plasma NGAL on the Cobas 6000 c501 (Roche Diagnostics, Rotkreuz, Switzerland) with matched measurements run on Hitachi 917, the method's linearity on the Cobas 6000 in urine, EDTA and Lithium-Heparin (Li-Hep), the influence of using EDTA or Li-Hep tubes and, finally, the impact of freezing and thawing on the sample. Forty matched samples of Li-Hep and EDTA plasma and 40 urine samples were analyzed for method, anticoagulant, and freeze-thaw comparisons. Linearity was assessed using high NGAL samples diluted in urine, EDTA, and Li-Hep plasma. Commercial internal controls were used for the imprecision study. The Cobas 6000 measured identically with the Hitachi 917, however, not in EDTA plasma (Median Difference = 17.50 μg/L, p < 0.0001). Freeze-thaw process reduced NGAL ((EDTA: Mean Difference = = 15.13 μg/L, p = 0.0014)(Li-Hep: Median Difference = = 6.5 μg/L, p = 0.0129)). NGAL results were higher in Li-Hep plasma than in EDTA plasma ((Non-thawed: Median Difference = = 14.5 μg/L, p < 0.0001), (Thawed: Median Difference = = 21.5 μg/L, p = 0.0003)). Linearity agreements were observed in all three specimens. Imprecision (CV%) was below 3%. The NGAL Test(TM) can be applied on the Cobas 6000 with acceptable performance, although the Cobas 6000 measured higher than the Hitachi 917 in EDTA plasma. Though clinically insignificant, we found that the freeze-thaw process had a reduced effect. NGAL results were higher in Li-Hep tubes than in EDTA tubes. Thus, for blood samples we recommend use of EDTA tubes for NGAL measurements.

75 FR 7040 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-16

... Hitachi Automotive Products Harrodsburg, KY....... 01/04/10 12/31/09 (USA) (State). 73204 The Tie King...). 73207 O'neal Steel (State)....... Greensboro, NC........ 01/05/10 12/31/09 73208 Nomura Asset Management New York, NY 01/05/10 12/12/09 USA, Inc. (Wkrs). 73209 CL Automotive LLC (Wkrs)... Highland Park, MI...

Tropical Storm Toraji Spawns Tornadoes in Japan

NASA Image and Video Library

2017-12-08

The outflow from Tropical Storm Toraji spawned tornadoes that caused injuries and property damage in Koshigaya, Saitama Prefecture, Japan, just northeast of Tokyo, on September 2, 2013. This image was taken by the Suomi NPP satellite's VIIRS instrument around 0425Z on September 2, 2013. Credit: NASA/NOAA NASA image use policy. NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Like us on Facebook Find us on Instagram

A New Stubby Species of Demodectic Mite (Acari: Demodicidae) From the Domestic Dog (Canidae).

PubMed

Morita, Tatsushi; Ohmi, Aki; Kiwaki, Akihito; Ike, Kazunori; Nagata, Katsuyuki

2018-02-28

A new species of Demodex was detected in the earwax of a dog with otitis externa in Saitama Prefecture, Japan, in July 2010. The opisthosoma length of the mite was slightly shorter than 1/2 of its body length, which was different from the other species in domestic dogs, D. canis and D. injai, but was similar to the form of mites termed "short-bodied species", including D. cornei. However, the stubby external form was morphologically different from those of "short-bodied species", excluding a case without a species description reported from Greece. Among known species, the mite was similar to D. equi and D. acutipes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kenji Akagi; Masayuki Ishiwata; Kenji Araki

In nuclear power plant construction, countless variety of parts, products, and jigs more than one million are treated under construction. Furthermore, strict traceability to the history of material, manufacturing, and installation is required for all products from the start to finish of the construction, which enforce much workforce and many costs at every project. In an addition, the operational efficiency improvement is absolutely essential for the effective construction to reduce the initial investment for construction. As one solution, RFID (Radio Frequent Identification) application technology, one of the fundamental technologies to realize a ubiquitous society, currently expands its functionality and generalmore » versatility at an accelerating pace in mass-production industry. Hitachi believes RFID technology can be useful of one of the key solutions for the issues in non-mass production industry as well. Under this situation, Hitachi initiated the development of next generation plant concept (ubiquitous plant construction technology) which utilizes information and RFID technologies. In this paper, our application plans of RFID technology to nuclear power is described. (authors)« less

Symposium N: Materials and Devices for Thermal-to-Electric Energy Conversion

DTIC Science & Technology

2010-08-24

X - ray diffraction, transmission electron microscopy, scanning electron microscopy, and dynamic light scattering. Thermal conductivity measurements...SEM), X - ray diffraction (XRD) measurements as well as Raman spectroscopy. The results from these techniques indicate a clear modification...was examined by using scanning electron microscope (SEM; HITACHI S-4500 model) attached with an energy dispersive x - ray spectroscopy. The electrical

Quantum Effect Physics, Electronics and Applications: Proceedings of the International Workshop Held in Luxor, Egypt on January 6-10, 1992

DTIC Science & Technology

1992-12-15

Giza Engineering Systems, Fujitsu, Hitachi, Matsushita, Mitsubishi, NEC, BTT, Sanyo, Sony. and Toshiba. K lsmail T Ikoma H I Smith Organizing and...etch and the i"• development of low etch rate surfaces were used for the fabrication of pyramid - shaped ridges with the QWs forming buried layers...inside the pyramids . "a/s Depending on the etch-depth, the wire /\

Electron Microscopist | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Cancer Research Technology Program (CRTP) develops and implements emerging technology, cancer biology expertise and research capabilities to accomplish NCI research objectives. The CRTP is an outward-facing, multi-disciplinary hub purposed to enable the external cancer research community and provides dedicated support to NCI’s intramural Center for Cancer Research (CCR). The dedicated units provide electron microscopy, protein characterization, protein expression, optical microscopy and genetics. These research efforts are an integral part of CCR at the Frederick National Laboratory for Cancer Research (FNLCR). CRTP scientists also work collaboratively with intramural NCI investigators to provide research technologies and expertise. KEY ROLES/RESPONSIBILITIES - THIS POSITION IS CONTINGENT UPON FUNDING APPROVAL The Electron Microscopist will: Operate ultramicrotomes (Leica) and other instrumentation related to the preparation of embedded samples for EM (TEM and SEM) Operate TEM microscopes, (specifically Hitachi, FEI T20 and FEI T12) as well as SEM microscopes (Hitachi); task will include loading samples, screening, and performing data collection for a variety of samples: from cells to proteins Manage maintenance for the TEM and SEM microscopes Provide technical advice to investigators on sample preparation and data collection

The Shock and Vibration Digest. Volume 12, Number 4.

DTIC Science & Technology

1980-04-01

self -excited oscillations. a great deal of experience has been gained in applying these techniques to practical situations. This Con- INVITED...Outlet Flow Field of Axial Flow Fans Key Words: Pumps, Compressors, Self -excited vibrations, Surges H. Fujita Mechanical Engrg. Res. Lab., Hitachi, Ltd...Tsu- Investigations concerned with the stability of stationary chiura, 300 Japan, NOISE-CON 79, Machinery Noise states and the possibility of self

Evaluation of Shipbuilding CAD/CAM/CIM Systems - Phase II (Requirements for Future Systems)

DTIC Science & Technology

1997-02-01

INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM February 1997 NSRP 0479...an analysis of CAD/CAM/CIM in shipyards, ship-design software firms, and alIied industries in Europe, Japan and the U.S. The purpose of the analysis...possible: Black and Veatch Hitachi Ariake Works Industrial Technology Institute Intergraph Corporation Kockums Computer Systems Mitsubishi Heavy Industries

Nanosizing a Metal-Organic Framework Enzyme Carrier for Accelerating Nerve Agent Hydrolysis

DTIC Science & Technology

2016-10-05

Previously, biodegradable liposome nano- carriers have been shown to be effective at providing functionally significant amounts of highly purified enzymes in...AlexaFluor-647 dye was purchased from Life Technologies (Thermo Fisher Scientific). Methyl 6-(pinacolboryl)-2-naphthoate was synthesized using a published...Hitachi) and PXRD (Smartlab, Rigaku). Labeling OPAA with Fluorescent Dye . AlexaFluor-647-labeled OPAA (OPAA647) was prepared by reacting OPAA (0.5

CORBASec Used to Secure Distributed Aerospace Propulsion Simulations

NASA Technical Reports Server (NTRS)

Blaser, Tammy M.

2003-01-01

The NASA Glenn Research Center and its industry partners are developing a Common Object Request Broker (CORBA) Security (CORBASec) test bed to secure their distributed aerospace propulsion simulations. Glenn has been working with its aerospace propulsion industry partners to deploy the Numerical Propulsion System Simulation (NPSS) object-based technology. NPSS is a program focused on reducing the cost and time in developing aerospace propulsion engines. It was developed by Glenn and is being managed by the NASA Ames Research Center as the lead center reporting directly to NASA Headquarters' Aerospace Technology Enterprise. Glenn is an active domain member of the Object Management Group: an open membership, not-for-profit consortium that produces and manages computer industry specifications (i.e., CORBA) for interoperable enterprise applications. When NPSS is deployed, it will assemble a distributed aerospace propulsion simulation scenario from proprietary analytical CORBA servers and execute them with security afforded by the CORBASec implementation. The NPSS CORBASec test bed was initially developed with the TPBroker Security Service product (Hitachi Computer Products (America), Inc., Waltham, MA) using the Object Request Broker (ORB), which is based on the TPBroker Basic Object Adaptor, and using NPSS software across different firewall products. The test bed has been migrated to the Portable Object Adaptor architecture using the Hitachi Security Service product based on the VisiBroker 4.x ORB (Borland, Scotts Valley, CA) and on the Orbix 2000 ORB (Dublin, Ireland, with U.S. headquarters in Waltham, MA). Glenn, GE Aircraft Engines, and Pratt & Whitney Aircraft are the initial industry partners contributing to the NPSS CORBASec test bed. The test bed uses Security SecurID (RSA Security Inc., Bedford, MA) two-factor token-based authentication together with Hitachi Security Service digital-certificate-based authentication to validate the various NPSS users. The test

JPRS Report, Science & Technology, Europe, Economic Competitiveness

DTIC Science & Technology

1991-04-25

business), and entertainment electronics com- panies such as Sony , Pioneer, JVC, Hitachi and Mat- sushita ("National Panasonic") in particular are...of outsiders from Southeast Asia, who are making life miser- able for the already too numerous big producers, such as BASF, Sony , TDK, Maxell, FDM...Motor, Mitsubishi Motor, and Yamaha Motor (motorcycles, alongside its parent com- pany Yamaha Corporation, which is also in the musical instrument

Microwave Fiber-Optics Delay Line.

DTIC Science & Technology

1980-01-01

frequency response. We observed the anticipated modulation resonance and its dependence on the dc bias level. However, we did not have a scanning Fabry - Perot ...could not be determined accurately because a scanning Fabry - Perot was not available. However, from the various experimental observations and the rise time...Hitachi HLP-2400U BH laser and a Rockwell heterojunction photodiode o. ......... 26 11 Demodulated rf power versus detector dc photocurrent

Dynamic Testing of Signal Transduction Deregulation During Breast Cancer Initiation

DTIC Science & Technology

2011-07-01

1 at a chamber pressure of ~3 × 10-6 Torr for the electron beam evaporated films. A Hitachi FB2100 Focused Ion Beam milling machine with a gallium ...immobilization. These include physical absorption, layer-by-layer (LBL) assembly, and covalent attachment, and eventually chose the covalent attachment...testing real-time signaling in live breast cancer cells, it is important to evaluate the nanosensors to monitor fluorescent compounds in single

Electro-Optics Millimeter/Microwave Technology in Japan. Report of DoD Technology Team.

DTIC Science & Technology

1985-05-01

Fiber Technology Hitachi is developing Ge-Se chalcogenide glass infrared optical fibers. Mate- rial development and evaluation has been carried out...chalcogenide glass fibers. The analysis indi- cates that the addition of Sb to Ge-Se chalcogenide glass should yield fibers with a very small absorption...representative of other commercial cables. Fiber is drawn using Vapor Axial Deposition (VAD) with pre-form glass ingots. Multiple fibers are combined

[The psychological effects of taking in "Shikohin": A cross-sectional exploratory study].

PubMed

Yokomitsu, Kengo; Kanai, Yoshihiro; Matsuki, Shuhei; Hirai, Hiroto; Iizuka, Tomoki; Wakasa, Komihiro; Akatsuka, Tomoaki; Sato, Kenji; Sakano, Yuji

2015-10-01

This study explores the psychological effects that Japanese people experience when consuming their "Shikohin", such as alcohol, tea, coffee, and tobacco. We'conducted a cross-sectional study among 542 people, from 20-to 69-year-old; who regularly consumed any one of "Shikohin" in Tokyo, Kanagawa, Saitama, and Chiba. The participants responded to an anonymous questionnaire concerning the consumption patterns of their "Shikohin" and the psychological effects that they experienced in taking in their "Shikohin". Results obtained using the K-J methods showed three common psychological effects in each "Shikohin". These effects included an increase in relaxation response, the promotion of social relationships, and an increase in positive mood. Our findings suggest that Japanese people may get some common effects through consumption of different "Shikohin".

Using a university characterization facility to educate the public about microscopes: light microscopes to SEM

NASA Astrophysics Data System (ADS)

Healy, Nancy; Henderson, Walter

2015-10-01

The National Nanotechnology Infrastructure Network (NNIN)1is an integrated partnership of 14 universities across the US funded by NSF to support nanoscale researchers. The NNIN education office is located at the Institute of Electronics and Nanotechnology at the Georgia Institute of Technology. At Georgia Tech we offer programs that integrate the facility and its resources to educate the public about nanotechnology. One event that has proved highly successful involves using microscopes in our characterization suite to educate a diverse audience about a variety of imaging instruments. As part of the annual Atlanta Science Festival (ATLSF)2 we provided an event entitled: "What's all the Buzz about Nanotechnology?" which was open to the public and advertised through a variety of methods by the ATLSF. During the event, we provided hands-on demos, cleanroom tours, and activities with three of our microscopes in our recently opened Imaging and Characterization Facility: 1. Keyence VHX-600 Digital Microscope; 2. Hitachi SU823 FE-SEM; and 3. Hitachi TM 3000. During the two hour event we had approximately 150 visitors including many families with school-aged children. Visitors were invited to bring a sample for scanning with the TM-3000. This paper will discuss how to do such an event, lessons learned, and visitor survey results.

Gas Dispersion Coefficients in Variably Saturated and Differently Textured Porous Media Muhammad Naveed (1), Shoichiro Hamamoto (1), Ken Kawamoto (1,2), Toshihiro Sakaki (3), Per Moldrup (4), and Toshiko Komatsu (1,2) (1) Graduate School of Science and Engineering, Saitama University, Saitama, Japan (2) Institute of Environmental Science and Technology, Saitama University, Saitama, Japan (3) Center for Experimental Study of Subsurface Environmental Processes, Colorado School of Mines, Golden, CO, USA (4) Department of Biotechnology, Chemistry and Environmental Engineering, Aalborg University, Aalborg, Denmark

NASA Astrophysics Data System (ADS)

Naveed, M.; Kawamoto, K.; Hamamoto, S.; Sakaki, T.; Moldrup, P.; Komatsu, T.

2010-12-01

The transport and fate of gases in the soil are governed by gas advection, diffusion and dispersion phenomena. Among three gas transport phenomena, gas dispersion is least understood. Main objective of this study is to investigate the gas dispersion phenomena, emphasising on the effect of moisture content, sand particle shape, particle size, particle size distribution, and scale dependency on gas dispersion. One dimensional laboratory column experiments, in an apparatus consisting of an acrylic column attached to inlet and outlet chambers (Hamamoto et al., SSAJ, 2009), were conducted for the measurements of gas dispersion coefficient (DH). Various types of sands (Narita and Toyoura sands from Japan, and Granusils and Accusands from United States) and glass beads with variable moisture contents were used as porous media. Shape of the sand particles were characterized in terms of sphericity and roundness. The changes in the oxygen concentration within the soil column and in the inlet and outlet chambers were monitored. In addition the air pressure at inlet and middle of the soil column was also monitored to ensure the uniform density of porous media along the column. The measured breakthrough curves were fitted with the analytical solution of the advection dispersion equation to determine dispersion coefficients. The measured dispersion coefficient (DH) showed linear increase with pore velocity (u0). Measured dispersivity (λ= DH/u0) increases with decrease in air filled porosity induced by adding moisture contents in sands. Its values varies from 0 to 3 cm on decreasing air filled porosity from 0.50 (air dry) to 0.25 (field capacity). Shape of the sand particles has no significant effect on gas dispersion. When gas dispersion phenomena was studied on different shape of the sand particles at various air filled porosities, it was found that for angular sand particles initially gas dispersivity increases more rapidly as compared to rounded sand particles and finally both attains nearly same values at field capacity. Particle size has no significant effect on gas dispersion but particle size distribution has considerable effect on it. For the same sand when a coefficient of uniformity (Uc) increases from 1 to 4, gas dispersivity increases by 1.5 times. Gas dispersion coefficient was measured with two different sized columns and it was found that there is no effect of diameter and length of the column on gas dispersion for sandy soils. Therefore it can be concluded that only air filled porosity and particle size distribution should be considered for modeling the gas dispersivity in porous media.

ONRASIA Scientific Information Bulletin, Volume 16, Number 1

DTIC Science & Technology

1991-03-01

be expressed naturally in an and hence the programs produced by pline. They range from computing the algebraic language such as Fortran, these efforts...years devel- gram an iterative scheme to solve the function satisfies oping vectorizing compilers for Hitachi. problem. This is quite natural to do in...for it ential equations to be expressed in a on the plate, with 0,=1 at the outside to compile into efficient vectorizable natural mathematical syntax

Screening for seemingly healthy newborns with congenital cytomegalovirus infection by quantitative real-time polymerase chain reaction using newborn urine: an observational study

PubMed Central

Yamaguchi, Akira; Oh-ishi, Tsutomu; Arai, Takashi; Sakata, Hideaki; Adachi, Nodoka; Asanuma, Satoshi; Oguma, Eiji; Kimoto, Hirofumi; Matsumoto, Jiro; Fujita, Hidetoshi; Uesato, Tadashi; Fujita, Jutaro; Shirato, Ken; Ohno, Hideki; Kizaki, Takako

2017-01-01

Objective Approximately 8–10% of newborns with asymptomatic congenital cytomegalovirus (cCMV) infection develop sensorineural hearing loss (SNHL). However, the relationship between CMV load, SNHL and central nervous system (CNS) damage in cCMV infection remains unclear. This study aimed to examine the relationship between urinary CMV load, SNHL and CNS damage in newborns with cCMV infection. Study design The study included 23 368 newborns from two maternity hospitals in Saitama Prefecture, Japan. Urine screening for cCMV infection (quantitative real-time PCR) and newborn hearing screening (automated auditory brainstem response (AABR) testing) were conducted within 5 days of birth to examine the incidence of cCMV infection and SNHL, respectively. CNS damage was assessed by MRI of cCMV-infected newborns. Results The incidence of cCMV infection was 60/23 368 (0.257%; 95% CI 0.192% to 0.322%). The geometric mean urinary CMV DNA copy number in newborns with cCMV was 1.79×106 copies/mL (95% CI 7.97×105 to 4.02×106). AABR testing revealed abnormalities in 171 of the 22 229 (0.769%) newborns whose parents approved hearing screening. Of these 171 newborns, 22 had SNHL (12.9%), and 5 of these 22 were infected with cCMV (22.7%). Newborns with both cCMV and SNHL had a higher urinary CMV DNA copy number than newborns with cCMV without SNHL (p=0.036). MRI revealed CNS damage, including white matter abnormalities, in 83.0% of newborns with cCMV. Moreover, newborns with CNS damage had a significantly greater urinary CMV load than newborns without CNS damage (p=0.013). Conclusions We determined the incidence of cCMV infection and urinary CMV DNA copy number in seemingly healthy newborns from two hospitals in Saitama Prefecture. SNHL and CNS damage were associated with urinary CMV DNA copy number. Quantification of urinary CMV load may effectively predict the incidence of late-onset SNHL and neurodevelopmental disorders. PMID:28110288

Development of Crystallizer for Advanced Aqueous Reprocessing Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tadahiro Washiya; Atsuhiro Shibata; Toshiaki Kikuchi

2006-07-01

Crystallization is one of the remarkable technologies for future fuel reprocessing process that has safety and economical advantages. Japan Atomic Energy Agency (JAEA) (former Japan Nuclear Cycle Development Institute), Mitsubishi Material Corporation and Saitama University have been developing the crystallization process. In previous study, we carried out experimental studies with uranium, MOX and spent fuel conditions, and flowsheet analysis was considered. In association with these studies, an innovative continuous crystallizer and its system was developed to ensure high process performance. From the design study, an annular type continuous crystallizer was selected as the most promising design, and performance was confirmedmore » by small-scale test and engineering scale demonstration at uranium crystallization conditions. In this paper, the design study and the demonstration test results are described. (authors)« less

Method for estimating infection route and speed of influenza.

PubMed

Ijuin, Kazushige; Matsuda, Rieko; Hayashi, Yuzuru

2006-03-01

This paper puts forward a method for estimating the infection route and speed of influenza from the daily variations in the amount of influenza formulations supplied at distant city pharmacies. The cross-correlation function between the time variations at the pharmacies indicates as for the drug sales, how many days a pharmacy lags behind another pharmacy. The comparison of the time lags between the pharmacies can lead to the estimation of the infection route of influenza. Taking into account the distance between the locations of the pharmacies, we can calculate the infection speed of influenza. Three pharmacies located in Tokyo and its vicinity (Saitama and Kanagawa) are taken as an example. The thrust of this paper is to introduce the new strategy that can take full advantage of the information every pharmacy has in possession.

JPRS Report, Near East & South Asia, Israel

DTIC Science & Technology

1991-09-11

practice, however, a but I never heard him; I have enough music here at the good number of ceremonies are held at the Western Western Wall." Wall...Israel on the volume Company, Daihatsu, Suzuki, Sony , Hitachi, and others. of their purchases from Israeli industry. Golan: "We are certain that, under...Kibbutz that arrived in the corresponding period last year. How- Yad Mordekhai, an entertainment center on the Dead ever, in recent months, the branch

Performance evaluation of new automated hepatitis B viral markers in the clinical laboratory: two quantitative hepatitis B surface antigen assays and an HBV core-related antigen assay.

PubMed

Park, Yongjung; Hong, Duck Jin; Shin, Saeam; Cho, Yonggeun; Kim, Hyon-Suk

2012-05-01

We evaluated quantitative hepatitis B surface antigen (qHBsAg) assays and a hepatitis B virus (HBV) core-related antigen (HBcrAg) assay. A total of 529 serum samples from patients with hepatitis B were tested. HBsAg levels were determined by using the Elecsys (Roche Diagnostics, Indianapolis, IN) and Architect (Abbott Laboratories, Abbott Park, IL) qHBsAg assays. HBcrAg was measured by using Lumipulse HBcrAg assay (Fujirebio, Tokyo, Japan). Serum aminotransferases and HBV DNA were respectively quantified by using the Hitachi 7600 analyzer (Hitachi High-Technologies, Tokyo, Japan) and the Cobas AmpliPrep/Cobas TaqMan test (Roche). Precision of the qHBsAg and HBcrAg assays was assessed, and linearity of the qHBsAg assays was verified. All assays showed good precision performance with coefficients of variation between 4.5% and 5.3% except for some levels. Both qHBsAg assays showed linearity from 0.1 to 12,000.0 IU/mL and correlated well (r = 0.9934). HBsAg levels correlated with HBV DNA (r = 0.3373) and with HBcrAg (r = 0.5164), and HBcrAg also correlated with HBV DNA (r = 0.5198; P < .0001). This observation could provide impetus for further research to elucidate the clinical usefulness of the qHBsAg and HBcrAg assays.

[MRI/TRUS fusion-guided prostate biopsy : Value in the context of focal therapy].

PubMed

Franz, T; von Hardenberg, J; Blana, A; Cash, H; Baumunk, D; Salomon, G; Hadaschik, B; Henkel, T; Herrmann, J; Kahmann, F; Köhrmann, K-U; Köllermann, J; Kruck, S; Liehr, U-B; Machtens, S; Peters, I; Radtke, J P; Roosen, A; Schlemmer, H-P; Sentker, L; Wendler, J J; Witzsch, U; Stolzenburg, J-U; Schostak, M; Ganzer, R

2017-02-01

Several systems for MRI/TRUS fusion-guided biopsy of the prostate are commercially available. Many studies have shown superiority of fusion systems for tumor detection and diagnostic quality compared to random biopsy. The benefit of fusion systems in focal therapy of prostate cancer (PC) is less clear. Critical considerations of fusion systems for planning and monitoring of focal therapy of PC were investigated. A systematic literature review of available fusion systems for the period 2013-5/2016 was performed. A checklist of technical details, suitability for special anatomic situations and suitability for focal therapy was established by the German working group for focal therapy (Arbeitskreis fokale und Mikrotherapie). Eight fusion systems were considered (Artemis™, BioJet, BiopSee®, iSR´obot™ Mona Lisa, Hitachi HI-RVS, UroNav and Urostation®). Differences were found for biopsy mode (transrectal, perineal, both), fusion mode (elastic or rigid), navigation (image-based, electromagnetic sensor-based or mechanical sensor-based) and space requirements. Several consensus groups recommend fusion systems for focal therapy. Useful features are "needle tracking" and compatibility between fusion system and treatment device (available for Artemis™, BiopSee® and Urostation® with Focal One®; BiopSee®, Hitachi HI-RVS with NanoKnife®; BioJet, BiopSee® with cryoablation, brachytherapy). There are a few studies for treatment planning. However, studies on treatment monitoring after focal therapy are missing.

Evaluation of the Radiometer whole blood glucose measuring system, EML 105.

PubMed

Harff, G A; Janssen, W C; Rooijakkers, M L

1997-03-01

The performance of a new glucose electrode system from Radiometer was tested using two EML 105 analyzers (Radiometer Medical A/S, Copenhagen, Denmark). Results were very precise (both analyzers reported CV = 1.0% at a glucose concentration of 13.4 mmol/l). Comparison of methods was performed according to the NCCLS EP9-T guideline. Patients glucose results from both analyzers were lower compared with the results obtained with a Hitachi 911 (Boehringer Mannheim, Mannheim, Germany). There was no haematocrit dependency of relevance.

Study on excitation and fluorescence spectrums of Japanese citruses to construct machine vision systems for acquiring fluorescent images

NASA Astrophysics Data System (ADS)

Momin, Md. Abdul; Kondo, Naoshi; Kuramoto, Makoto; Ogawa, Yuichi; Shigi, Tomoo

2011-06-01

Research was conducted to acquire knowledge of the ultraviolet and visible spectrums from 300 -800 nm of some common varieties of Japanese citrus, to investigate the best wave-lengths for fluorescence excitation and the resulting fluorescence wave-lengths and to provide a scientific background for the best quality fluorescent imaging technique for detecting surface defects of citrus. A Hitachi U-4000 PC-based microprocessor controlled spectrophotometer was used to measure the absorption spectrum and a Hitachi F-4500 spectrophotometer was used for the fluorescence and excitation spectrums. We analyzed the spectrums and the selected varieties of citrus were categorized into four groups of known fluorescence level, namely strong, medium, weak and no fluorescence.The level of fluorescence of each variety was also examined by using machine vision system. We found that around 340-380 nm LEDs or UV lamps are appropriate as lighting devices for acquiring the best quality fluorescent image of the citrus varieties to examine their fluorescence intensity. Therefore an image acquisition device was constructed with three different lighting panels with UV LED at peak 365 nm, Blacklight blue lamps (BLB) peak at 350 nm and UV-B lamps at peak 306 nm. The results from fluorescent images also revealed that the findings of the measured spectrums worked properly and can be used for practical applications such as for detecting rotten, injured or damaged parts of a wide variety of citrus.

78 FR 70532 - Notification of Proposed Production Activity, Hitachi Automotive Systems Americas, Inc., Subzone...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... products (lithium-ion hybrid battery pack assemblies, electrical power steering modules, and electronic...-HK would be able to choose the duty rates during customs entry procedures that apply to lithium-ion..., alternators, distributors, other static converters, inverter modules, rotors/stators, batteries, ignition...

Screening for seemingly healthy newborns with congenital cytomegalovirus infection by quantitative real-time polymerase chain reaction using newborn urine: an observational study.

PubMed

Yamaguchi, Akira; Oh-Ishi, Tsutomu; Arai, Takashi; Sakata, Hideaki; Adachi, Nodoka; Asanuma, Satoshi; Oguma, Eiji; Kimoto, Hirofumi; Matsumoto, Jiro; Fujita, Hidetoshi; Uesato, Tadashi; Fujita, Jutaro; Shirato, Ken; Ohno, Hideki; Kizaki, Takako

2017-01-20

Approximately 8-10% of newborns with asymptomatic congenital cytomegalovirus (cCMV) infection develop sensorineural hearing loss (SNHL). However, the relationship between CMV load, SNHL and central nervous system (CNS) damage in cCMV infection remains unclear. This study aimed to examine the relationship between urinary CMV load, SNHL and CNS damage in newborns with cCMV infection. The study included 23 368 newborns from two maternity hospitals in Saitama Prefecture, Japan. Urine screening for cCMV infection (quantitative real-time PCR) and newborn hearing screening (automated auditory brainstem response (AABR) testing) were conducted within 5 days of birth to examine the incidence of cCMV infection and SNHL, respectively. CNS damage was assessed by MRI of cCMV-infected newborns. The incidence of cCMV infection was 60/23 368 (0.257%; 95% CI 0.192% to 0.322%). The geometric mean urinary CMV DNA copy number in newborns with cCMV was 1.79×10 6 copies/mL (95% CI 7.97×10 5 to 4.02×10 6 ). AABR testing revealed abnormalities in 171 of the 22 229 (0.769%) newborns whose parents approved hearing screening. Of these 171 newborns, 22 had SNHL (12.9%), and 5 of these 22 were infected with cCMV (22.7%). Newborns with both cCMV and SNHL had a higher urinary CMV DNA copy number than newborns with cCMV without SNHL (p=0.036). MRI revealed CNS damage, including white matter abnormalities, in 83.0% of newborns with cCMV. Moreover, newborns with CNS damage had a significantly greater urinary CMV load than newborns without CNS damage (p=0.013). We determined the incidence of cCMV infection and urinary CMV DNA copy number in seemingly healthy newborns from two hospitals in Saitama Prefecture. SNHL and CNS damage were associated with urinary CMV DNA copy number. Quantification of urinary CMV load may effectively predict the incidence of late-onset SNHL and neurodevelopmental disorders. Published by the BMJ Publishing Group Limited. For permission to use (where not already

Dietary Variety and Decline in Lean Mass and Physical Performance in Community-Dwelling Older Japanese: A 4-year Follow-Up Study.

PubMed

Yokoyama, Y; Nishi, M; Murayama, H; Amano, H; Taniguchi, Y; Nofuji, Y; Narita, M; Matsuo, E; Seino, S; Kawano, Y; Shinkai, S

2017-01-01

To examine associations of dietary variety with changes in lean mass and physical performance during a 4-year period in an elderly Japanese population. Four-year prospective study. The Hatoyama Cohort Study and Kusatsu Longitudinal Study, Japan. 935 community-dwelling Japanese aged 65 years or older. Dietary variety was assessed using a 10-item food frequency questionnaire. Body composition was determined by multifrequency bioelectrical impedance analysis, and physical performance (grip strength and usual gait speed) was measured in surveys at baseline and 4 years later. Longitudinal analysis included only participants who were originally in the upper three quartiles of lean body mass, appendicular lean mass, grip strength, and usual gait speed. The outcome measures were decline in lean body mass, appendicular lean mass, grip strength, and usual gait speed, defined as a decrease to the lowest baseline quartile level at the 4-year follow-up survey. Associations of dietary variety with the outcome measures were examined by logistic regression analysis adjusted for potential confounders. In the fully adjusted model, the odds ratios for decline in grip strength and usual gait speed were 0.43 (95% confidence interval, 0.19-0.99) and 0.43 (confidence interval, 0.19-0.99), respectively, for participants in the highest category of dietary variety score as compared with those in the lowest category. Dietary variety was not significantly associated with changes in lean body mass or appendicular lean mass. Among older adults, greater dietary variety may help maintain physical performance, such as grip strength and usual gait speed, but not lean mass.

Application of small-diameter FBG sensors for detection of damages in composites

NASA Astrophysics Data System (ADS)

Okabe, Yoji; Mizutani, Tadahito; Yashiro, Shigeki; Takeda, Nobuo

2001-08-01

Small-diameter fiber Bragg grating (FBG) sensors have been developed by Hitachi Cable Ltd. and the authors. Since the outside diameter of polyimide coating is 52 micrometers , embedding of the sensors into carbon fiber reinforced plastic (CFRP) composites prepregs of 125 micrometers in thickness does not deteriorate the mechanical properties of the composite laminates. In this research, the small-diameter FBG sensor was applied for the detection of transverse cracks in CFRP composites. The FBG sensor was embedded in 0 degree(s) ply of a CFRP cross-ply laminate.

Women's Education, Learning and Empowerment. Proceedings of the International Forum on Intercultural Exchange (Saitama, Japan, November 20-23, 1996).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

This document in Japanese and English was prepared for the International Forum on Intercultural Exchange sponsored by the National Women's Education Centre in Japan to give participants the conference schedule and profiles of the presenters. Profiles are accompanied by comments from the presenters about their paper topics or the general theme of…

Rapid diagnostic tests apply for pediatric infections at outpatient clinic setting.

PubMed

Ushijima, Hiroshi; Thongprachum, Aksara; Tran, Dinh Nguyen; Fujimoto, Tsuguto; Hanaoka, Nozomu; Okitsu, Shoko; Takanashi, Sayaka; Mizuguchi, Masashi; Hayakawa, Satoshi

2015-01-01

Early identification of the etiology of infection is beneficial. Most infections are treated as outpatients. However, facilities for rapid diagnosis are not available in clinic settings. We applied Immunochromatography (IC) and Loop-mediated Isothermal Amplification (LAMP) methods to rapidly diagnose pathogens among 31 children with respiratory infection and 12 with gastroenteritis at a clinic in Saitama prefecture, Japan. Pathogens were then screened by multiplex conventional and real-time PCRs and bacterial culture. Respiratory pathogens were found in 64.5%. Despite the narrow spectrum, rapid tests identified pathogens in 28.6% of cases with a high agreement rate of 89.3% with PCR. Gastroenteritis pathogens were found in 66.7%. E. coli was positive in 3 cases and all were negative for verotoxin by LAMP. The agreement rate of IC and PCR assay was high, 100%. IC and LAMP are reliable and suitable methods in limited-resource settings for early pathogenic identification, which will help appropriate management, avoid unnecessary intervention, and cost saving.

DESCRIPTION OF NARRATIVES ON "KAWAGOE CITY PLANNING": PRACTICE AND THE INTERPRETATION FOR CONSERVATION OF HISTORIC TOWNSCAPE

NASA Astrophysics Data System (ADS)

Sawasaki, Takanori; Fujii, Satoshi; Hatori, Tsuyoshi; Hasegawa, Daiki

Recently, there are problems to be lifeless on the centre of a city. On the other hand there is a case to regain the vigor of the city. It is helpful in city planning in the future to pay attention to such a success case and to obtain a general knowledge of how the success is led. As the method of getting the knowledge, it is common so far to use "Natural scientific methodology" what is the unspiritual quantitative analysis. However, the author applies "Hermeneutic methodology" what is the analysis of interpreting "Narrative" to understand the thought of people who are related to the city planning. In this research, the author first interviews various concerned about the city planning in Kawagoe City, Saitama Prefecture, where it is said that a success case of city planning, and constructs a "Narrative" through this interviews. As it is interpreted, the factor that lead success to "the Kawagoe city planning" seems to be explained.

Single exposure EUV patterning of BEOL metal layers on the IMEC iN7 platform

NASA Astrophysics Data System (ADS)

Blanco Carballo, V. M.; Bekaert, J.; Mao, M.; Kutrzeba Kotowska, B.; Larivière, S.; Ciofi, I.; Baert, R.; Kim, R. H.; Gallagher, E.; Hendrickx, E.; Tan, L. E.; Gillijns, W.; Trivkovic, D.; Leray, P.; Halder, S.; Gallagher, M.; Lazzarino, F.; Paolillo, S.; Wan, D.; Mallik, A.; Sherazi, Y.; McIntyre, G.; Dusa, M.; Rusu, P.; Hollink, T.; Fliervoet, T.; Wittebrood, F.

2017-03-01

This paper summarizes findings on the iN7 platform (foundry N5 equivalent) for single exposure EUV (SE EUV) of M1 and M2 BEOL layers. Logic structures within these layers have been measured after litho and after etch, and variability was characterized both with conventional CD-SEM measurements as well as Hitachi contouring method. After analyzing the patterning of these layers, the impact of variability on potential interconnect reliability was studied by using MonteCarlo and process emulation simulations to determine if current litho/etch performance would meet success criteria for the given platform design rules.

Reference System of DNA and Protein Sequences on CD-ROM

NASA Astrophysics Data System (ADS)

Nasu, Hisanori; Ito, Toshiaki

DNASIS-DBREF31 is a database for DNA and Protein sequences in the form of optical Compact Disk (CD) ROM, developed and commercialized by Hitachi Software Engineering Co., Ltd. Both nucleic acid base sequences and protein amino acid sequences can be retrieved from a single CD-ROM. Existing database is offered in the form of on-line service, floppy disks, or magnetic tape, all of which have some problems or other, such as usability or storage capacity. DNASIS-DBREF31 newly adopt a CD-ROM as a database device to realize a mass storage and personal use of the database.

77 FR 14838 - General Electric-Hitachi Global Laser Enrichment LLC, Commercial Laser-Based Uranium Enrichment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-13

... safety, chemical process safety, fire safety, emergency management, environmental protection... the transportation of SNM of low strategic significance, human factors engineering, and electrical...

High-resolution ultrasonography in assessing temporomandibular joint disc position.

PubMed

Talmaceanu, Daniel; Lenghel, Lavinia Manuela; Bolog, Nicolae; Popa Stanila, Roxana; Buduru, Smaranda; Leucuta, Daniel Corneliu; Rotar, Horatiu; Baciut, Mihaela; Baciut, Grigore

2018-02-04

The purpose of this study was to determine the diagnostic value of high-resolution ultrasonography (US) in temporomandibular joint (TMJ) disc displacements. A number of 74 patients (148 TMJs) with signs and symptoms of TMJ disorders, according to the Research Diagnostic Criteria for Temporomandibular Disorders, were included in this study. All patients received US and magnetic resonance imaging (MRI) of both TMJs 1 to 5 days after the clinical examination. MRI examinations were performed using 1.5 T MRI equipment (Siemens Avanto, Siemens, Erlangen). Ultrasonographic examination was performed on a Hitachi EUB 8500 (Hitachi Medical Corp., Tokyo, Japan) scanner with L 54 M6.5-13 MHz linear transducer. MRI depicted 68 (45.95%) normal joints, 47 (31.76%) with disc displacement with reduction, 33 (22.3%) with disc displacement without reduction and 34 (22.97%) with degenerative changes. US detected 78 (52.7%) normal joints, 37 (25%) with disc displacement with reduction, 33 (22.3%) with disc displacement without reduction and 21 (14.19%) with degenerative changes. Compared to MRI, US showed a sensitivity of 93.1%, specificity of 87.88%, accuracy of 90.32%, a positive predictive value of 87.1% and a negative predictive value of 93.55% for overall diagnosis of disc displacement. The Youden index was 0.81. Based on our results, high-resolution ultrasonography showed high sensitivity, specificity and accuracy in the diagnosis of TMJ disc displacement. It could be a valuable imaging technique in assessing TMJ disc position. The diagnostic value of high-resolution ultrasonography depends strictly on the examiner's skills and on the equipment used.

An Educational Program of Engineering Ethics and Its Dissemination Activity

NASA Astrophysics Data System (ADS)

Muramatsu, Ryujiro; Nagashima, Shigeo

Education on ethics for corporate employees, especially for engineers, seems to become increasingly important for most of companies in Japan, because some affairs or scandals caused by ethical problem in many companies were likely to subject them to operational disadvantages. Even in Hitachi, Ltd., we have worked on education of engineering ethics for two years. In this paper, we describe some activities of committees on engineering ethics, an e-learning training course which is usable on our intranet e-learning system, and a short-term in-house training course operated regularly in our training institute. And we also refer to its dissemination activities to employees in each division and some subsidiaries.

Energy Conservation Potential of Surface Modification Technologies

DTIC Science & Technology

1985-09-01

vigorously pursued by industry. In effect, two companies, Energy Conversion Devices, Inc. and Chronar, both amor- phous photovoltaic cell producers...MOOM«* -KIO «t t» IO CM 00 00 VO Ov vo oo CM vo r- o Tj- o oo CM IO vO© t IO t ON to ovvotor- inov ^io CM CM — — CM — vo CM CM in — tn...Maklno Mach. Tool Co. Model MC 40 (Y-15 3/4") Kearney & Trecker M1lwaukee-Mat1c 180 (Y«20") Hitachi Selkl U.S.A. Inc. HA-400 SEIKIMATIC <Y» 20") Ex- Cell

Lotus LADM Based Self-Decontaminating Surfaces

DTIC Science & Technology

2007-05-01

nylon composite was examined with a scanning electron microscope (SEM), Hitachi S -3200N, operated at 10kV and magnifications from 50x to 2000x. For...cos1( HL H S p L p S d L d SeL γγγγγγθγ ⋅+⋅+⋅=+ (1) To make the nylon film surface hydrophobic, we need to attach a low surface tension material to...views of roughness pattern. For this rough surface, r and ФS are defined as: ( ) 1 2 2 2 ++ = dR Rhr π (4) ( )2 2 2 dR R S + =Φ π (5

Design and Analysis of Thorium-fueled Reduced Moderation Boiling Water Reactors

NASA Astrophysics Data System (ADS)

Gorman, Phillip Michael

The Resource-renewable Boiling Water Reactors (RBWRs) are a set of light water reactors (LWRs) proposed by Hitachi which use a triangular lattice and high void fraction to incinerate fuel with an epithermal spectrum, which is highly atypical of LWRs. The RBWRs operate on a closed fuel cycle, which is impossible with a typical thermal spectrum reactor, in order to accomplish missions normally reserved for sodium fast reactors (SFRs)--either fuel self-sufficiency or waste incineration. The RBWRs also axially segregate the fuel into alternating fissile "seed" regions and fertile "blanket" regions in order to enhance breeding and leakage probability upon coolant voiding. This dissertation focuses on thorium design variants of the RBWR: the self-sufficient RBWR-SS and the RBWR-TR, which consumes reprocessed transuranic (TRU) waste from PWR used nuclear fuel. These designs were based off of the Hitachi-designed RBWR-AC and the RBWR-TB2, respectively, which use depleted uranium (DU) as the primary fertile fuel. The DU-fueled RBWRs use a pair of axially segregated seed sections in order to achieve a negative void coefficient; however, several concerns were raised with this multi-seed approach, including difficulty with controlling the reactor and unacceptably high axial power peaking. Since thorium-uranium fuel tends to have much more negative void feedback than uranium-plutonium fuels, the thorium RBWRs were designed to use a single elongated seed to avoid these issues. A series of parametric studies were performed in order to find the design space for the thorium RBWRs, and optimize the designs while meeting the required safety constraints. The RBWR-SS was optimized to maximize the discharge burnup, while the RBWR-TR was optimized to maximize the TRU transmutation rate. These parametric studies were performed on an assembly level model using the MocDown simulator, which calculates an equilibrium fuel composition with a specified reprocessing scheme. A full core model was

[Statistical analysis using freely-available "EZR (Easy R)" software].

PubMed

Kanda, Yoshinobu

2015-10-01

Clinicians must often perform statistical analyses for purposes such evaluating preexisting evidence and designing or executing clinical studies. R is a free software environment for statistical computing. R supports many statistical analysis functions, but does not incorporate a statistical graphical user interface (GUI). The R commander provides an easy-to-use basic-statistics GUI for R. However, the statistical function of the R commander is limited, especially in the field of biostatistics. Therefore, the author added several important statistical functions to the R commander and named it "EZR (Easy R)", which is now being distributed on the following website: http://www.jichi.ac.jp/saitama-sct/. EZR allows the application of statistical functions that are frequently used in clinical studies, such as survival analyses, including competing risk analyses and the use of time-dependent covariates and so on, by point-and-click access. In addition, by saving the script automatically created by EZR, users can learn R script writing, maintain the traceability of the analysis, and assure that the statistical process is overseen by a supervisor.

Psychiatric disorders in patients who lost family members to cancer and asked for medical help: descriptive analysis of outpatient services for bereaved families at Japanese cancer center hospital.

PubMed

Ishida, Mayumi; Onishi, Hideki; Wada, Mei; Tada, Yukio; Ito, Hiroshi; Narabayashi, Masaru; Sasaki, Yasutsuna; Nomura, Shinobu; Uchitomi, Yosuke

2011-03-01

There have been no previous studies about consultation of the bereaved who have lost a loved one to cancer and ask for medical help. The aim of this study was to investigate their basic characteristics and their psychiatric disorders. A retrospective study using clinical and background data obtained over 30 months (from April 2007 to September 2009) was conducted at outpatient services for bereaved families at the Department of Psycho-Oncology at Saitama Medical University International Medical Center, Japan. During the period of investigation, 51 patients underwent consultation. The patients were frequently female (P < 0.0001) and the spouse of the deceased. Regarding the psychiatric diagnoses, major depression was the most common (39%), followed by adjustment disorders (28%). This study revealed basic characteristics and psychiatric disorders of the bereaved who asked for medical help. Most of the patients were women (86.3%) and 86.3% of them received a psychiatric diagnosis. This information is important for both physicians and psychologists since the bereaved who have lost a loved one to cancer often ask for medical help in clinical settings.

Status of climacteric symptoms among middle-aged to elderly Japanese women: comparison of general healthy women with women presenting at a menopausal clinic.

PubMed

Ikeda, Toshiyuki; Makita, Kazuya; Ishitani, Ken; Takamatsu, Kiyoshi; Horiguchi, Fumi; Nozawa, Shiro

2005-04-01

To examine the status and characteristics of climacteric symptoms reported by generally healthy middle-aged to elderly women in Japan, those living in Saitama Prefecture were surveyed . The subjects comprised 398 women ranging in age from 40 to <60 years (mean age, 50.5 years). Climacteric symptoms were objectively assessed using the Keio questionnaire. The total scores obtained for the 40 symptoms were used to calculate symptom prevalence and severity. (i) The most frequent symptom was poor memory, reported by 88.7% of the women. (ii) Lumbar-sacral back pain was rated as a severe symptom by the highest percentage of women (15.3%). (iii) The prevalence and severity of poor memory and lumbar-sacral back pain did not differ with menopausal status. (iv) Hot flashes and sweats were slightly higher in peri- and early postmenopausal women than in premenopausal women. The present study showed that healthy women who do not consult physicians because of climacteric symptoms are primarily concerned with age-related symptoms, such as poor memory, loss of hair, and forgetfulness.

Establishing pediatric reference intervals for 13 biochemical analytes derived from normal subjects in a pediatric endocrinology clinic in Korea.

PubMed

Cho, Sun-Mi; Lee, Sang-Guk; Kim, Ho Seong; Kim, Jeong-Ho

2014-12-01

Defining pediatric reference intervals is one of the most difficult tasks for laboratory physicians. The continuously changing physiology of growing children makes their laboratory values moving targets. In addition, ethnic and behavioral differences might also cause variations. The aim of this study was to establish age- and sex-specific partitioned reference intervals for 13 serum biochemical analytes in Korean children. A total of 2474 patients, girls aged 2-14 years and boys aged 2-16 years, who underwent a short stature workup but were diagnosed as normal at the Pediatric Endocrinology Clinic of Severance Hospital (Seoul, Korea) between September 2010 and June 2012 were included in this study. The levels of serum calcium, inorganic phosphorus, blood urea nitrogen, creatinine, uric acid, glucose, total cholesterol, total protein, albumin, alkaline phosphatase, aspartic aminotransferase, alanine aminotransferase, and total bilirubin were measured using a Hitachi 7600 analyzer (Hitachi High-Technologies Corporation, Tokyo, Japan). Reference intervals were partitioned according to sex or age subgroups using the Harris and Boyd method. Most analytes except calcium and albumin required partitioning either by sex or age. Age-specific partitioned reference intervals for alkaline phosphatase, creatinine, and total bilirubin were established for both males and females after being partitioned by sex. Additional age-specific partitioning of aspartic aminotransferase in females and total protein and uric acid in males was also required. Inorganic phosphorus, total cholesterol, alanine aminotransferase, blood urea nitrogen, and glucose were partitioned only by sex. This study provided updated age- and sex-specific pediatric reference intervals for 13 basic serum chemistry analytes from a sufficient number of healthy children by using a modern analytical chemistry platform. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights

Isolation and identification of female DNA on postcoital penile swabs.

PubMed

Cina, S J; Collins, K A; Pettenati, M J; Fitts, M

2000-06-01

After sexual assault, cells originating from the assailant may be recovered from the victim. Through polymerase chain reaction (PCR)-based technology, positive scientific identification of the assailant may be made from these cells. Described is a prospective study describing a method for positively identifying cells from a female sex partner obtained from postcoital swabs of the penis of the male sex partner. Swabs were taken from the penis of a man at 1- to 24-hour intervals after coitus. DNA was isolated from each swab through standard organic extraction methods. The presence of female DNA was detected using the gender-specific amelogenin marker. Extracted DNA was amplified for eight different genetic loci using the Promega PowerPlex kit (Promega) and Amplitaq Gold (Perkin Elmer). Amplified samples were electrophoresed on precast sequencing gels (Hitachi) and were analyzed fluorescently using Hitachi's FMBIO 2 fluorescent scanner and software. Each sample obtained from a penile swab or condom was compared to male and female buccal controls. Female DNA was isolated from all postcoital penile swabs as determined by exclusive amplification of the X-chromosome specific 212 base pair amelogenin marker. In all cases, scientific identification of the female DNA from the swabs was determined by coamplification of eight STR loci (PowerPlex) and was compared to female and male control profiles. Cells shed from a female victim during sexual intercourse can be retrieved from the penis of a male offender after sexual intercourse during a 1- to 24-hour postcoital interval. DNA can be extracted from these cells and can be used to scientifically identify the female sexual participant through PCR-based technology. It is suggested that penile swabs be taken from alleged perpetrators of sexual assaults to associate them with a female victim.

Collaborative Manufacturing Management in Networked Supply Chains

NASA Astrophysics Data System (ADS)

Pouly, Michel; Naciri, Souleiman; Berthold, Sébastien

ERP systems provide information management and analysis to industrial companies and support their planning activities. They are currently mostly based on theoretical values (averages) of parameters and not on the actual, real shop floor data, leading to disturbance of the planning algorithms. On the other hand, sharing data between manufacturers, suppliers and customers becomes very important to ensure reactivity towards markets variability. This paper proposes software solutions to address these requirements and methods to automatically capture the necessary corresponding shop floor information. In order to share data produced by different legacy systems along the collaborative networked supply chain, we propose to use the Generic Product Model developed by Hitachi to extract, translate and store heterogeneous ERP data.

Sequence search on a supercomputer.

PubMed

Gotoh, O; Tagashira, Y

1986-01-10

A set of programs was developed for searching nucleic acid and protein sequence data bases for sequences similar to a given sequence. The programs, written in FORTRAN 77, were optimized for vector processing on a Hitachi S810-20 supercomputer. A search of a 500-residue protein sequence against the entire PIR data base Ver. 1.0 (1) (0.5 M residues) is carried out in a CPU time of 45 sec. About 4 min is required for an exhaustive search of a 1500-base nucleotide sequence against all mammalian sequences (1.2M bases) in Genbank Ver. 29.0. The CPU time is reduced to about a quarter with a faster version.

Age-related plasma chemistry findings in the buff-crested bustard (Eupodotis ruficrista gindiana).

PubMed

Bailey, T A; Wernery, U; Howlett, J; Naldo, J; Samour, J H

1998-12-01

Blood samples were obtained from adult (> 1.5 years) and juvenile (2-8 weeks, 9-16 weeks and 17-24 weeks) captive buff-crested bustards (Eupodotis ruficrista gindiana) to study age-related changes. A total of twelve different tests were conducted using a Hitachi 90011 wet chemistry analyzer. A comparison of the values obtained was made between adult and juvenile buff-crested bustards and from the literature with other bustard species. Significant differences between adult and juvenile buff-crested bustards were found for glucose, uric acid, total protein, alkaline phosphatase, asparatate amino transferase and calcium. The results obtained from this study provide blood chemistry values for this species and demonstrate age-related differences between adult and juvenile birds.

High-speed prediction of crystal structures for organic molecules

NASA Astrophysics Data System (ADS)

Obata, Shigeaki; Goto, Hitoshi

2015-02-01

We developed a master-worker type parallel algorithm for allocating tasks of crystal structure optimizations to distributed compute nodes, in order to improve a performance of simulations for crystal structure predictions. The performance experiments were demonstrated on TUT-ADSIM supercomputer system (HITACHI HA8000-tc/HT210). The experimental results show that our parallel algorithm could achieve speed-ups of 214 and 179 times using 256 processor cores on crystal structure optimizations in predictions of crystal structures for 3-aza-bicyclo(3.3.1)nonane-2,4-dione and 2-diazo-3,5-cyclohexadiene-1-one, respectively. We expect that this parallel algorithm is always possible to reduce computational costs of any crystal structure predictions.

Decontamination, decommissioning, and vendor advertorial issue, 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

The focus of the July-August issue is on Decontamination, decommissioning, and vendor advertorials. Articles and reports in this issue include: D and D technical paper summaries; The role of nuclear power in turbulent times, by Tom Chrisopher, AREVA, NP, Inc.; Enthusiastic about new technologies, by Jack Fuller, GE Hitachi Nuclear Energy; It's important to be good citizens, by Steve Rus, Black and Veatch Corporation; Creating Jobs in the U.S., by Guy E. Chardon, ALSTOM Power; and, and, An enviroment and a community champion, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovations article is titled Best of the bestmore » TIP achievement 2008, by Edward Conaway, STP Nuclear Operating Company.« less

Study for Nuclear Structures of 22-35Na Isotopes via Measurements of Reaction Cross Sections

NASA Astrophysics Data System (ADS)

Suzuki, Shinji

2014-09-01

T. Ohtsubo, M. Nagashima, T. Ogura, Y. Shimbara (Grad. Sch. of Sc., Niigata Univ.), M.Takechi, H. Geissel, M. Winkler (GSI), D. Nishimura, T. Sumikama (Dept. of Phys., Tokyo Univ. of Sc.), M. Fukuda, M. Mihara, H. Uenishi (Dept. of Phys., Osaka Univ.), T. Kuboki, T. Suzuki, T. Yamaguchi, H. Furuki, C. S. Lee, K. Sato (Dept. of Phys., Saitama Univ.), A. Ozawa, H. Ohnishi, T. Moriguchi, S. Fukuda, Y. Ishibashi, D. Nagae, R. Nishikiori, T. Niwa (Inst. of Phys., Univ. of Tsukuba), N. Aoi (RCNP), Rui-Jiu Chen, N. Inabe, D. Kameda, T. Kubo, M. Lantz, T. Ohnishi, K. Okumura, H. Sakurai, H. Suzuki, H. Takeda, S. Takeuchi, K. Tanaka, Y. Yanagisawa (RIKEN), De-Qing Fang, Yu-Gang Ma (SINAP), T. Izumikawa (RI Ctr., Niigata Univ.), and S. Momota (Fac. of Engn., Kochi Univ. of Tech.) Reaction cross sections (σR) for 22-35Na isotopes have been measured at around 240 MeV/nucleon. The σR for 22-35Na were measured for the first time. Enhancement in cross sections is clearly observed from the systematics for stable nuclei, for isotopes with large mass numbers. These enhancement can be mainly ascribed to the nuclear deformation. We will discuss the nuclear structure (neutron skin, nuclear shell structure) for neutron-excess Na isotopes. T. Ohtsubo, M. Nagashima, T. Ogura, Y. Shimbara (Grad. Sch. of Sc., Niigata Univ.), M.Takechi, H. Geissel, M. Winkler (GSI), D. Nishimura, T. Sumikama (Dept. of Phys., Tokyo Univ. of Sc.), M. Fukuda, M. Mihara, H. Uenishi (Dept. of Phys., Osaka Univ.), T. Kuboki, T. Suzuki, T. Yamaguchi, H. Furuki, C. S. Lee, K. Sato (Dept. of Phys., Saitama Univ.), A. Ozawa, H. Ohnishi, T. Moriguchi, S. Fukuda, Y. Ishibashi, D. Nagae, R. Nishikiori, T. Niwa (Inst. of Phys., Univ. of Tsukuba), N. Aoi (RCNP), Rui-Jiu Chen, N. Inabe, D. Kameda, T. Kubo, M. Lantz, T. Ohnishi, K. Okumura, H. Sakurai, H. Suzuki, H. Takeda, S. Takeuchi, K. Tanaka, Y. Yanagisawa (RIKEN), De-Qing Fang, Yu-Gang Ma (SINAP), T. Izumikawa (RI Ctr., Niigata Univ.), and S. Momota (Fac. of Engn

Methodological specifics of the study of micro HPP based on internal combustion engines with air cooling and cogeneration

NASA Astrophysics Data System (ADS)

Shchinnikov, P. A.; Tomilov, V. G.; Sinelnikov, D. S.

2017-01-01

The article considers some aspects of the research methodology of micro heat power plants based on internal combustion engines with air cooling and cogeneration based on energy balance equations and the laws of heat transfer. The research is conducted for such a setup based on the Hitachi internal combustion engine with 2.4 kW capacity. It has shown the efficiency of cogeneration use in the form of useful heat flow from air, cooling the cylinder head, with its further heating by utilizing the heat of flue gases in an additional plate heat exchanger. It has been shown that the cogeneration can save fuel costs 3-10 times compared with heat guns, depending on the duration of the setup use.

Manufacture and Quality Control of Insert Coil with Real ITER TF Conductor

DOE PAGES

Ozeki, H.; Isono, T.; Uno, Y.; ...

2016-03-02

JAEA successfully completed the manufacture of the toroidal field (TF) insert coil (TFIC) for a performance test of the ITER TF conductor in the final design in cooperation with Hitachi, Ltd. The TFIC is a single-layer 8.875-turn solenoid coil with 1.44-m diameter. This will be tested for 68-kA current application in a 13-T external magnetic field. TFIC was manufactured in the following order: winding of the TF conductor, lead bending, fabrication of the electrical termination, heat treatment, turn insulation, installation of the coil into the support mandrel structure, vacuum pressure impregnation (VPI), structure assembly, and instrumentation. Here in this presentation,more » manufacture process and quality control status for the TFIC manufacturing are reported.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozeki, H.; Isono, T.; Uno, Y.

JAEA successfully completed the manufacture of the toroidal field (TF) insert coil (TFIC) for a performance test of the ITER TF conductor in the final design in cooperation with Hitachi, Ltd. The TFIC is a single-layer 8.875-turn solenoid coil with 1.44-m diameter. This will be tested for 68-kA current application in a 13-T external magnetic field. TFIC was manufactured in the following order: winding of the TF conductor, lead bending, fabrication of the electrical termination, heat treatment, turn insulation, installation of the coil into the support mandrel structure, vacuum pressure impregnation (VPI), structure assembly, and instrumentation. Here in this presentation,more » manufacture process and quality control status for the TFIC manufacturing are reported.« less

International trade and waste and fuel managment issue, 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

The focus of the January-February issue is on international trade and waste and fuel managment. Major articles/reports in this issue include: A global solution for clients, by Yves Linz, AREVA NP; A safer, secure and economical plant, by Andy White, GE Hitachi Nuclear; Robust global prospects, by Ken Petrunik, Atomic Energy of Canada Limited; Development of NPPs in China, by Chen Changbing and Li Huiqiang, Huazhong University of Science and Technology; Yucca Mountain update; and, A class of its own, by Tyler Lamberts, Entergy Nuclear. The Industry Innovation articles in this issue are: Fuel assembly inspection program, by Jim Lemons,more » Tennessee Valley Authority; and, Improved in-core fuel shuffle for reduced refueling duration, by James Tusar, Exelon Nuclear.« less

The First Report of Vibrio parahaemolyticus Strain O10:K60 in Japan, a New Combination of O and K Serotypes Isolated from a Patient with Gastroenteritis.

PubMed

Ueno, Hiroyuki; Tomari, Kentaro; Kikuchi, Koji; Kobori, Sumie; Miyazaki, Motonobu

2016-01-01

Vibrio parahaemolyticus is an important pathogen that causes gastroenteritis in humans, generally associated with the consumption of contaminated seafood, particularly raw shellfish. There are many serotypes in V. parahaemolyticus resulting from a combination of O and K antigens. Among them, O3:K6 and their variants, which represent the pandemic clone, are the most widespread strains worldwide. In this study, we examined V. parahaemolyticus isolated from a gastroenteritis patient's stool at a hospital in Saitama City, Japan in 2013. Serotyping of the O and K antigens identified the strain as O10:K60. To our knowledge, this is the first reported case of a V. parahaemolyticus strain with this antigen combination in Japan. Subsequently, we used PCR to assay for pathogenicity-associated genes, and found that it was positive for tdh, T3SS1, and T3SS2α genes. Antibiotic susceptibility tests showed that the strain was susceptible to all selected antibiotics except ampicillin. Moreover, we detected specific marker genes for the pandemic clone with two kinds of PCR assay. Our results suggest that the isolate O10:K60 is a newly emerging serotype that belongs to the pandemic clone.

Antigenic characterization of small, round-structured viruses by immune electron microscopy.

PubMed

Okada, S; Sekine, S; Ando, T; Hayashi, Y; Murao, M; Yabuuchi, K; Miki, T; Ohashi, M

1990-06-01

Small, round-structured viruses (SRSVs) detected from nonbacterial gastroenteritis outbreaks in Tokyo and Saitama Prefecture, Japan, during the period from 1977 to 1988 were tentatively classified into nine antigenic patterns from SRSV-1 (S-1) to SRSV-9 (S-9) by cross-immune electron microscopy (IEM). S-1 and S-2 appeared pattern specific, while S-3 to S-9, distinguishable from each other in their reactivity, appeared somewhat antigenically related. Their antigenic relatedness to the Norwal, Hawaii, and Otofuke agents was also examined by IEM by using antisera to these agents. S-3 appeared most closely related to the Norwalk agent. S-4 and S-5 were related to the Norwalk agent and, presumably, were distantly related to the Hawaii and Otofuke agents. S-6 and S-7 were related to the Hawaii and Otofuke agents. S-8 and S-9 were related to the Otofuke agent and, presumably, were distantly related to the Hawaii agent. The prevalence of each antigenic pattern in 38 outbreaks was examined: S-8 was implicated in 24% of the outbreaks S-5 in 16%, S-4 in 13%, S-9 in 13%, S-6 in 11%, and others in 5%.

OSCAR API for Real-Time Low-Power Multicores and Its Performance on Multicores and SMP Servers

NASA Astrophysics Data System (ADS)

Kimura, Keiji; Mase, Masayoshi; Mikami, Hiroki; Miyamoto, Takamichi; Shirako, Jun; Kasahara, Hironori

OSCAR (Optimally Scheduled Advanced Multiprocessor) API has been designed for real-time embedded low-power multicores to generate parallel programs for various multicores from different vendors by using the OSCAR parallelizing compiler. The OSCAR API has been developed by Waseda University in collaboration with Fujitsu Laboratory, Hitachi, NEC, Panasonic, Renesas Technology, and Toshiba in an METI/NEDO project entitled "Multicore Technology for Realtime Consumer Electronics." By using the OSCAR API as an interface between the OSCAR compiler and backend compilers, the OSCAR compiler enables hierarchical multigrain parallel processing with memory optimization under capacity restriction for cache memory, local memory, distributed shared memory, and on-chip/off-chip shared memory; data transfer using a DMA controller; and power reduction control using DVFS (Dynamic Voltage and Frequency Scaling), clock gating, and power gating for various embedded multicores. In addition, a parallelized program automatically generated by the OSCAR compiler with OSCAR API can be compiled by the ordinary OpenMP compilers since the OSCAR API is designed on a subset of the OpenMP. This paper describes the OSCAR API and its compatibility with the OSCAR compiler by showing code examples. Performance evaluations of the OSCAR compiler and the OSCAR API are carried out using an IBM Power5+ workstation, an IBM Power6 high-end SMP server, and a newly developed consumer electronics multicore chip RP2 by Renesas, Hitachi and Waseda. From the results of scalability evaluation, it is found that on an average, the OSCAR compiler with the OSCAR API can exploit 5.8 times speedup over the sequential execution on the Power5+ workstation with eight cores and 2.9 times speedup on RP2 with four cores, respectively. In addition, the OSCAR compiler can accelerate an IBM XL Fortran compiler up to 3.3 times on the Power6 SMP server. Due to low-power optimization on RP2, the OSCAR compiler with the OSCAR API

Development of critical dimension measurement scanning electron microscope for ULSI (S-8000 series)

NASA Astrophysics Data System (ADS)

Ezumi, Makoto; Otaka, Tadashi; Mori, Hiroyoshi; Todokoro, Hideo; Ose, Yoichi

1996-05-01

The semiconductor industry is moving from half-micron to quarter-micron design rules. To support this evolution, Hitachi has developed a new critical dimension measurement scanning electron microscope (CD-SEM), the model S-8800 series, for quality control of quarter- micron process lines. The new CD-SEM provides detailed examination of process conditions with 5 nm resolution and 5 nm repeatability (3 sigma) at accelerating voltage 800 V using secondary electron imaging. In addition, a newly developed load-lock system has a capability of achieving a high sample throughput of 20 wafers/hour (5 point measurements per wafer) under continuous operation. To support user friendliness, the system incorporates a graphical user interface (GUI), an automated pattern recognition system which helps locating measurement points, both manual and semi-automated operation, and user-programmable operating parameters.

A Mobile Nanoscience and Electron Microscopy Outreach Program

NASA Astrophysics Data System (ADS)

Coffey, Tonya; Kelley, Kyle

2013-03-01

We have established a mobile nanoscience laboratory outreach program in Western NC that puts scanning electron microscopy (SEM) directly in the hands of K-12 students and the general public. There has been a recent push to develop new active learning materials to educate students at all levels about nanoscience and nanotechnology. Previous projects, such as Bugscope, nanoManipulator, or SPM Live! allowed remote access to advanced microscopies. However, placing SEM directly in schools has not often been possible because the cost and steep learning curve of these technologies were prohibitive, making this project quite novel. We have developed new learning modules for a microscopy outreach experience with a tabletop SEM (Hitachi TM3000). We present here an overview of our outreach and results of the assessment of our program to date.

Fabrication and evaluation of 100 Ah cylindrical lithium ion battery for electric vehicle applications

NASA Astrophysics Data System (ADS)

Hyung, Yoo-Eup; Moon, Seong-In; Yum, Duk-Hyeng; Yun, Seong-Kyu

A total of 100 Ah class lithium ion cells with C/LiCoO 2 cell system for electric vehicles (EVs) was developed. EV-size lithium ion battery was developed by Sony, KERI/STC, SAFT, VARTA, Sanyo and Matsushita. GS battery and Hitachi have developed also stationary type large scale (70-80 Ah) lithium ion batteries. Lithium ion battery module for EVs was demonstrated by Sony/Nissan and KERI/STC in 1996. At present, the performance of developed EV-cells was up to 115 Wh/kg and 286 W/kg of specific power at 80% DOD. We assume our EV cells to have 248 and 242 km driving distance per one charge with DST-120 mode and ECE-15 mode, respectively. Finally, we performed safety/abuse tests of developed lithium ion cell.

Heat insulating device for low temperature liquefied gas storage tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okamoto, T.; Nishimoto, T.; Sawada, K.

1978-05-02

Hitachi Shipbuilding and Engineering Co., Ltd.'s insulation method for spherical LNG containers solves various problems associated with insulating a sphere's three-dimensional curved surface; equalizing the thickness of the insulation, insulating the junctions between insulation blocks, and preventing seawater or LNG from penetrating the insulation barrier in the event of a rupture in the tank and ship's hull. The design incorporates a number of blocks or plates of rigid foam-insulating material bonded to the outer wall; seats for receiving pressing jigs for the bonding operation are secured to the outer wall in the joints between the insulating blocks. The joints aremore » filled with soft synthetic foam (embedding the seats), a moistureproof layer covers the insulating blocks and joints, and a waterproof material covers the moistureproof layer.« less

Secondary barrier construction for low temperature liquefied gas storage tank carrying vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okamoto, T.; Nishimoto, T.; Sawada, K.

1978-12-05

A new LNG-cargo-tank secondary barrier developed by Japan's Hitachi Shipbuilding and Engineering Co., Ltd., offers ease of fabrication, simple construction, improved efficiency of installation, and protection against seawater ingress as well as LNG leakage. The secondary barrier, intended for use below spherical LNG tanks, consists of unit heat-insulating block plates adhesively secured to the bottom plate of the ship's hold, heat-insulating filling members stuffed into the joints between the block plates, and a protective layer formed on the entire surface of the block plates and the filling members. These unit block plates are in the form of heat-insulating members ofmore » the required thickness, preformed into a square or trapezoidal shape, particularly in the form of rigid-foam synthetic-resin plates.« less

FBIS report. Science and technology: Japan, December 10, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-12-10

Contents (partial): Japan: Fabrication of Diamond Single Crystal Thin Film by Ion Beam Deposition; Japan: Hitachi Metal Develops New Semi Solid Metal Processing Technology; Japan: NTT Develops Fuel Cell System That Uses Both City Gas, LPG; Japan: Daihatsu Motor Completes Prototype EV; Japan: NIRIM Announces Success With Synthetic Bone Development; Japan: Sandoz Pharmaceuticals Plans Clinical Trials of Gene Therapy to Cerebral Tumor in Japan; Japan: MITI To Provide Aid for Residential Solar Power Generation Systems; Japan: MELCO To Provide Satellite Solar Cell Panel for SSL, USA; Japan: Japan Atomic Energy Research Institute Leads Nuclear Research; Japan: Kobe Steel`s Superconducting Magnetmore » Ready to Go Fast; Japan: MPT To Begin Validation Test for Electric Money Implementation; and Japan: Defense Agency to Send ASDF`s Pilots to Russia for Training.« less

Massively parallel quantum computer simulator

NASA Astrophysics Data System (ADS)

De Raedt, K.; Michielsen, K.; De Raedt, H.; Trieu, B.; Arnold, G.; Richter, M.; Lippert, Th.; Watanabe, H.; Ito, N.

2007-01-01

We describe portable software to simulate universal quantum computers on massive parallel computers. We illustrate the use of the simulation software by running various quantum algorithms on different computer architectures, such as a IBM BlueGene/L, a IBM Regatta p690+, a Hitachi SR11000/J1, a Cray X1E, a SGI Altix 3700 and clusters of PCs running Windows XP. We study the performance of the software by simulating quantum computers containing up to 36 qubits, using up to 4096 processors and up to 1 TB of memory. Our results demonstrate that the simulator exhibits nearly ideal scaling as a function of the number of processors and suggest that the simulation software described in this paper may also serve as benchmark for testing high-end parallel computers.

Women in Development: Towards Global Networking. Extract from the Proceedings of the International Forum on Intercultual Exchange (Saitama, Japan), October 29-30, 1991).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

The Japanese National Women's Education Centre (NWEC) held its International Forum on Intercultural Exchange to undertake a broad exchange of information on socioeconomic development, focusing on the present condition of women and their roles, and to conduct detailed discussions of international cooperation with regard to women's solidarity on a…

Do bonding and bridging social capital affect self-rated health, depressive mood and cognitive decline in older Japanese? A prospective cohort study.

PubMed

Murayama, Hiroshi; Nishi, Mariko; Matsuo, Eri; Nofuji, Yu; Shimizu, Yumiko; Taniguchi, Yu; Fujiwara, Yoshinori; Shinkai, Shoji

2013-12-01

Little is known regarding the longitudinal effects of bonding and bridging social capital on health. This study examined the longitudinal associations of bonding and bridging social capital with self-rated health, depressive mood, and cognitive decline in community-dwelling older Japanese. Data analyzed in this study were from the 2010 (baseline) and 2012 (follow-up) Hatoyama Cohort Study. Bonding social capital was assessed by individual perception of homogeneity of the neighborhood (the level of homogeneity among neighbors) and of networks (the amount of homogeneous personal networks) in relation to age, gender, and socioeconomic status. Bridging social capital was assessed by individual perception of heterogeneity of networks (the amount of heterogeneous personal networks) in relation to age, gender, and socioeconomic status. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to evaluate the effects of baseline social capital on poor health outcome at follow-up by logistic regression analysis. In total, 681 people completed baseline and follow-up surveys. The mean age of participants was 71.8 ± 5.1 years, and 57.9% were male. After adjusting for sociodemographics, lifestyle factors, comorbidity, functional capacity, baseline score of each outcome, and other bonding/bridging social capital, stronger perceived neighborhood homogeneity was inversely associated with poor self-rated health (OR = 0.55, 95% CI = 0.30-1.00) and depressive mood assessed by the Geriatric Depression Scale (OR = 0.58, 95% CI = 0.34-0.99). When participants who reported a depressive mood at baseline were excluded, stronger perceived heterogeneous network was inversely associated with depressive mood (OR = 0.40, 95% CI = 0.19-0.87). Neither bonding nor bridging social capital was significantly associated with cognitive decline assessed by the Mini-Mental State Examination. In conclusion, bonding and bridging social capital affect health in different ways, but they both have

Study of photoluminescence properties of CaAl{sub 2}O{sub 4}: Eu{sup 2+} prepared by combustion synthesis method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hingwe, V. S., E-mail: vishwas.hingwe@yahoo.in; Omanwar, S. K.; Bajaj, N. S.

2016-05-06

Eu{sup 2+} doped alkaline earth metals such as strontium aluminate, calcium aluminate and barium aluminate prepared by using modified combustion synthesis method at 600°C with Urea as fuel. Crystal structure is determined by using XRD and the sample confirmation by using the FTIR. The effect of the host material on the photoluminescence (PL) and phosphorescence properties were studied by using the Hitachi F-7000 spectrofluorimeter equipped with a 450W Xenon lamp, in the range 200-650 nm. The emission spectra of Eu{sup 2+} range from 450 to 500 nm in the Blue to aqua region and the transition 4f{sup 7}-4f{sup 6} 5d{sup 1}.more » The observed emission in CaAl{sub 2}O{sub 4} is 440 nm.« less

Close association of vascular and valvular calcification and prognosis of patients on continuous ambulatory peritoneal dialysis.

PubMed

Gen, Shikou; Inoue, Tsutomu; Nodaira, Yuka; Ikeda, Naofumi; Kobayashi, Kazuhiro; Watanabe, Yusuke; Kanno, Yoshihiko; Nakamoto, Hidetomo; Suzuki, Hiromichi

2008-01-01

In the present study, we examined the association between vascular and valvular calcification and the prognosis of patients on continuous ambulatory peritoneal dialysis (CAPD). Data were collected from the records of patients introduced onto CAPD therapy during 1999 - 2006 at the Department of Nephrology, Saitama Medical University. At the start of CAPD, cardiac and vascular echography were used to examine 162 patients (average age: 56 +/- 5 years; 58 men, 104 women; 43 with and 119 without diabetes) for evaluation of vascular and valvular calcification. Both vascular and valvular calcification were found in 32 patients. Vascular calcification was found in 16, and valvular calcification in 11. Over 5 years, 11 patients suffered from cardiovascular disease (7 with stroke, 4 with myocardial infarction). All of these patients had vascular or valvular calcification at the start of CAPD therapy. We also used Cox hazard analysis to examine values for Ca, P, Ca x P, intact parathyroid hormone (iPTH), and lipids. None of these values were independent contributory factors for incidence of cardiovascular disease in patients on CAPD. These data suggest the importance of vascular and valvular echography to evaluate patients on CAPD, especially at the start of CAPD therapy. Vascular and valvular calcification are important factors for determining the prognosis of patients on CAPD.

A pilot study evaluating a new questionnaire for prostatic symptom scoring, the SPSS, and its sensitivity as constructed to objective measures of outflow obstruction.

PubMed

Yano, Masataka; Kitahara, Satoshi; Yasuda, Kosaku; Yamanishi, Tomonori; Nakai, Hideo; Yanagisawa, Ryouzo; Morozumi, Makoto; Homma, Yukio

2004-05-01

To evaluate the extent to which our newly developed questionnaire, the Saitama Prostate Symptom Score (SPSS), for prostatic symptom scoring reflects objective findings in benign prostatic hyperplasia (clinical BPH) and to compare it with the International Prostate Symptom Score (IPSS) with regard to diagnostic sensitivity in clinical BPH. In this study, both the SPSS and the IPSS were self-administered by patients. Free uroflowmetry, a pressure-flow study and the measurement of prostatic volume were carried out. There was no significant correlation between the results of the IPSS questionnaire and the urethral obstruction grade estimated by Schaefer or Abrams-Griffiths nomograms. The total score of the SPSS was correlated with these nomograms (P = 0.0487 and P = 0.0413, respectively). There was no significant correlation between the results of the IPSS questionnaire and the total volume or transition zone volume of the prostate, whereas the total score of the SPSS correlated with the total volume of the gland and transition zone volume (P = 0.0044 and P= 0.0051, respectively). This study revealed the SPSS to correlate with objective findings satisfactorily. However, there are still several aspects of the SPSS which need to be improved upon, and the questionnaire should be studied in larger numbers of patients suffering from lower urinary tract symptoms.

Current trends in use of intracanal medications in dental care facilities: questionnaire-based survey on training dental hygienists at educational institutions.

PubMed

Furusawa, Masahiro; Yoshida, Takashi; Hosokawa, Souhei; Ariizumi, Yuugo

2013-01-01

The success of root canal therapy is dependent not only on removal of infected pulp (pulpectomy) followed by root canal enlargement, but also on the pharmacological effects of intracanal medications. Various intracanal medications are used. Formaldehyde preparations such as formocresol were common in the past, but these are no longer used in Europe or the US due to the biological toxicity of formaldehyde. In this study, a questionnaire was used to determine current trends in the use of intracanal medications at dental care facilities where dental hygiene students undergo practical training. The questionnaire comprised questions regarding the types of frequently used intracanal medications and their methods of application at dental care facilities in Saitama and Shizuoka prefectures. The results indicated that calcium hydroxide preparations were more commonly used in Europe or the US. However, these results also revealed that formaldehyde preparations were frequently used, which slightly differs from the scenario in Europe and the US. This study revealed that multiple intracanal medications were used for root canal therapy. Furthermore, it was also observed that cotton plugs were generally used as applicator tips for intracanal medications, whereas the use of absorbent paper points was relatively uncommon. The results suggest that the cost of absorbent paper points needs to be reduced.

Gender, age, and cultural differences in the Japanese version of the Infant-Toddler Social and Emotional Assessment.

PubMed

Yago, Satoshi; Hirose, Taiko; Kawamura, Aki; Omori, Takahide; Okamitsu, Motoko

2015-01-01

This study aimed to clarify the characteristics of the Japanese version of the Infant-Toddler Social and Emotional Assessment (J-ITSEA), a parentreport questionnaire concerning social-emotional/behavioral problems and delays in competence in 1- to 3-year-old children. The differences in score between genders, ages, and between the J-ITSEA and the original Infant-Toddler Social and Emotional Assessment were examined. The data of 617 participants recruited from Saitama prefecture through stratified two-stage sampling were analyzed. The Cronbach's alpha ranged from 0.76 to 0.93. Gender differences emerged for some problems and all competence scales, with boys rated higher in the Externalizing problem domain and Activity/Impulsivity subscale and girls rated higher in the Internalizing problem domain, Inhibition to Novelty subscale, and all Competence scales. The Competence domain score increased across age groups. Compared with a normative sample in the US, participants in this study rated higher in Aggression/Defiance and Separation Distress, and rated lower in Peer Aggression and most of the Competence scales. The results indicate that the J-ITSEA scores should be interpreted in comparison with standard scores assigned for gender and 6-month age groups, and that specific criteria for the cut-off points for the J-ITSEA are required instead of those in the original questionnaire.

Women in Development: Towards the Development Making Women Visible. Proceedings of the International Forum on Intercultural Exchange (Saitama, Japan, September 30-October 2, 1992).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

This document was prepared in Japanese with an English translation for the 1992 International Forum on Intercultural Exchange sponsored by the National Women's Education Centre of Japan. Discussions for 1992 were to center on the theme of development to make women visible. The conference agenda is followed by profiles of the presenters with some…

Imaging and elemental mapping of biological specimens with a dual-EDS dedicated scanning transmission electron microscope

PubMed Central

Wu, J.S.; Kim, A. M.; Bleher, R.; Myers, B.D.; Marvin, R. G.; Inada, H.; Nakamura, K.; Zhang, X.F.; Roth, E.; Li, S.Y.; Woodruff, T. K.; O'Halloran, T. V.; Dravid, Vinayak P.

2013-01-01

A dedicated analytical scanning transmission electron microscope (STEM) with dual energy dispersive spectroscopy (EDS) detectors has been designed for complementary high performance imaging as well as high sensitivity elemental analysis and mapping of biological structures. The performance of this new design, based on a Hitachi HD-2300A model, was evaluated using a variety of biological specimens. With three imaging detectors, both the surface and internal structure of cells can be examined simultaneously. The whole-cell elemental mapping, especially of heavier metal species that have low cross-section for electron energy loss spectroscopy (EELS), can be faithfully obtained. Optimization of STEM imaging conditions is applied to thick sections as well as thin sections of biological cells under low-dose conditions at room- and cryogenic temperatures. Such multimodal capabilities applied to soft/biological structures usher a new era for analytical studies in biological systems. PMID:23500508

Women in Development: We as Agents of Social Change. Proceedings of the International Forum on Intercultural Exchange (3rd, Saitama [Japan], December 17-19, 1993).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

The third International Forum on Intercultural Exchange focused on four important issues for developing nations: literacy education, environmental protection, economic activities, and violence against women. In all of these areas, women are striving for social change as agents and beneficiaries of development. Following the conference agenda, the…

Family Education in the Era of Decreasing Births. The International Seminar on Family Education/International Forum on Intercultural Exchange (Saitama, Japan, December 12-15, 1994).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

This document, prepared in English for a conference in Japan on family education in the era of decreasing births, presents the conference agenda, profiles of contributors, and summaries or outlines of the papers to be delivered. The aim of the conference was to exchange research results from different countries and from interdisciplinary…

Green tea: Health benefits as cancer preventive for humans.

PubMed

Fujiki, Hirota

2005-01-01

Green tea is an acknowledged cancer preventive in Japan. The aim of this review article is to develop the concept of cancer prevention with green tea beverage for humans, which has largely been our exclusive research territory. This paper briefly reviews several topics, beginning with the introduction of our initial work on penta-O-galloyl-beta-D-glucose and (-)-epigallocatechin gallate (EGCG), the main constituent of green tea extract. The mechanisms of EGCG action, particularly the reduction of TNF-alpha are discussed, and we show how use of 3H-EGCG revealed a wide range of target organs for cancer prevention. The results of an epidemiological study in Saitama Prefecture allowed us to determine the cancer preventive amount of green tea-10 Japanese-size cups per day, about 2.5 g green tea extract-which made it possible for us to introduce the two-stage strategy of cancer prevention with green tea. The first stage is the delay of cancer onset for the general population. The second stage is the prevention of recurrence of cancer for patients following cancer treatment. Combination cancer prevention with green tea and cancer preventive drugs is proving especially beneficial for Japanese, who drink green tea every day. And finally, the stimulating comments of Prof. Jim Watson have encouraged green tea scientists. Copyright (c) 2005 The Japan Chemical Journal Forum and Wiley Periodicals, Inc.

[Factors associated with development of tuberculosis among children and young adults: a study of newly registered cases].

PubMed

Komatsu, R; Kitai, A; Mori, T; Yamada, Y

1990-03-01

In order to elucidate the factors relevant to the management and prevention of tuberculosis among children and young adults, a total of 191 tuberculosis cases who were newly registered at Health Centers in Saitama Prefecture and were aged less than 30 years were interviewed, and case-finding processes, treatment course and risk factors for clinical development were studied. Analyses of the time course from the patients' becoming aware of the clinical symptoms through the establishment of the diagnosis showed that the bacteriologically positive patients and the patients with cavitary lesion took a longer time before initiating medical action and before being finally diagnosed as tuberculous. Follow-up observation of patients' course of treatment revealed that 13% of the patients took prescribed medication irregularly or were lost to treatment. A case-control study was performed to determine the relationship between life style and disease risk. The control group was selected to match the patients for age and sex and also roughly with occupation. The risk factors found to be associated with the development of tuberculosis in this study included; family members' present or past history of tuberculosis, working night shift every week, eating at home less than once a day, diet not well balanced, indifference to personal health, lack of knowledge about tuberculosis and not attending 'cram' school. Also, patients were more likely to be taller and slimmer than controls.

Software tools for developing an acoustics multimedia CD-ROM

NASA Astrophysics Data System (ADS)

Bigelow, Todd W.; Wheeler, Paul A.

2003-10-01

A multimedia CD-ROM was developed to accompany the textbook, Science of Sound, by Tom Rossing. This paper discusses the multimedia elements included in the CD-ROM and the various software packages used to create them. PowerPoint presentations with an audio-track background were converted to web pages using Impatica. Animations of acoustic examples and quizzes were developed using Flash by Macromedia. Vegas Video and Sound Forge by Sonic Foundry were used for editing video and audio clips while Cleaner by Discreet was used to compress the clips for use over the internet. Math tutorials were presented as whiteboard presentations using Hitachis Starboard to create the graphics and TechSmiths Camtasia Studio to record the presentations. The CD-ROM is in a web-page format created with Macromedias Dreamweaver. All of these elements are integrated into a single course supplement that can be viewed by any computer with a web browser.

[Metallurgic drugs in ancient Japan].

PubMed

Sugiyama, S

2001-01-01

Advancements in metallurgic and pharmaceutical chemistry in ancient Japan were made by people like Mangan-Shonin, who combined elements from Shinto, Buddhism, and Taoism to take advantage of technologies brought by Chinese and Korean immigrants. The Shonin himself, though it may be considered a wild speculation, could well be such an immigrant. Along with the immigrants, the Shonin established government-subsidized temples (Jingu-ji, Jogaku-ji) throughout the country under sponsorship by the Imperial Court for the purpose of raising funds through private donations. Research and educational activities conducted in these temples ultimately resulted in a well-established body of chemical engineers who could excavate chemical substances as well as alter their natures. According to a list of regional products (Sasaki,19) 1972) up to the 14th century, these chemical substances and their derivative products included iron from the Hitachi region, cast metal from Shimotsuke, swords from Sagami, face powder (lead carbonate) from Ise, mercury, and gold.

Automated technical validation--a real time expert system for decision support.

PubMed

de Graeve, J S; Cambus, J P; Gruson, A; Valdiguié, P M

1996-04-15

Dealing daily with various machines and various control specimens provides a lot of data that cannot be processed manually. In order to help decision-making we wrote specific software coping with the traditional QC, with patient data (mean of normals, delta check) and with criteria related to the analytical equipment (flags and alarms). Four machines (3 Ektachem 700 and 1 Hitachi 911) analysing 25 common chemical tests are controlled. Every day, three different control specimens and one more once a week (regional survey) are run on the various pieces of equipment. The data are collected on a 486 microcomputer connected to the central computer. For every parameter the standard deviation is compared with the published acceptable limits and the Westgard's rules are computed. The mean of normals is continuously monitored. The final decision induces either an alarm sound and the print-out of the cause of rejection or, if no alarms happen, the daily print-out of recorded data, with or without the Levey Jennings graphs.

Analytical interference of drugs in clinical chemistry: I--Study of twenty drugs on seven different instruments.

PubMed

Letellier, G; Desjarlais, F

1985-12-01

We have investigated the effect of 20 drugs on the accuracy of results obtained from seven instruments now widely used in clinical biochemistry laboratories: Abbott VP, aca II, Cobas Bio, Ektachem 400, Hitachi 705, KDA and SMAC. Eleven to 18 constituents were analysed on each instrument. Our results lead us to the following conclusions: (1) only rarely does drug interference with a method lead to a clinically significant change in a measured value; (2) the magnitude of the change may relate linearly or non-linearly to the drug concentration but is usually independent of the target analyte concentration; (3) interference with a chemical reaction on one instrument does not always mean that the same reaction will be altered in the same way on other instruments; (4) no interferences were found for drugs with therapeutic levels in the low micro-molar range; (5) in most cases the interference could not be predicted from the chemical nature of drug.

The variation of the strength of neck extensor muscles and semispinalis capitis muscle size with head and neck position.

PubMed

Rezasoltani, A; Nasiri, R; Faizei, A M; Zaafari, G; Mirshahvelayati, A S; Bakhshidarabad, L

2013-04-01

Semispinalis capitis muscle (SECM) is a massive and long cervico-thoracic muscle which functions as a main head and neck extensor muscle. The aim of this study was to detect the effect of head and neck positions on the strength of neck extensor muscles and size of SECM in healthy subjects. Thirty healthy women students voluntarily participated in this study. An ultrasonography apparatus (Hitachi EUB 525) and a system of tension-meter were used to scan the right SECM at the level of third cervical spine and to measure the strength of neck extensor muscles at three head and neck positions. Neck extensor muscles were stronger in neutral than flexion or than extension positions while the size of SECM was larger in extension than neutral or than flexion position. The force generation capacity of the main neck extensor muscle was lower at two head and neck flexion and extension positions than neutral position. Copyright © 2012 Elsevier Ltd. All rights reserved.

Outage management and health physics issue, 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

2009-05-15

The focus of the May-June issue is on outage management and health physics. Major articles include the following: Planning and scheduling to minimize refueling outage, by Pat McKenna, AmerenUE; Prioritizing safety, quality and schedule, by Tom Sharkey, Dominion; Benchmarking to high standards, by Margie Jepson, Energy Nuclear; Benchmarking against U.S. standards, by Magnox North, United Kingdom; Enabling suppliers for new build activity, by Marcus Harrington, GE Hitachi Nuclear Energy; Identifying, cultivating and qualifying suppliers, by Thomas E. Silva, AREVA NP; Creating new U.S. jobs, by Francois Martineau, Areva NP. Industry innovation articles include: MSL Acoustic source load reduction, by Amirmore » Shahkarami, Exelon Nuclear; Dual Methodology NDE of CRDM nozzles, by Michael Stark, Dominion Nuclear; and Electronic circuit board testing, by James Amundsen, FirstEnergy Nuclear Operating Company. The plant profile article is titled The future is now, by Julia Milstead, Progress Energy Service Company, LLC.« less

Diagnostic performance of the EMIT-tox benzodiazepine immunoassay, FPIA serum benzodiazepine immunoassay, and radioreceptor assay in suspected acute poisoning.

PubMed

Verstraete, A G; Belpaire, F M; Leroux-Roels, G G

1998-01-01

We evaluated the diagnostic performance of the EMIT-tox serum benzodiazepine assay adapted to a Hitachi 717 analyzer (EMIT), the Abbott ADx serum benzodiazepine fluorescence polarization immunoassay (FPIA), and a radioreceptor assay (RRA) in 113 patients with suspected acute poisoning. The reference method was high-performance liquid chromatography with ultraviolet detection after solid-phase extraction. For the discrimination between negative and positive samples, the areas under the receiver-operating characteristic (ROC) curves were 0.976, 0.991, and 0.991 for EMIT (cutoff, 50-ng/mL diazepam), FPIA (cutoff, 12-ng/mL nordiazepam), and RRA (cutoff, 50-ng/mL diazepam), respectively. For the discrimination between non-toxic and toxic concentrations, the areas under the ROC curves were 0.896, 0.893, and 0.933, respectively. EMIT (with the cutoff lowered to 50 ng/mL), FPIA, and RRA can be reliably used to screen for the presence of benzodiazepines in serum, but in many cases they cannot discriminate between toxic and nontoxic concentrations.

Urine phenobarbital drug screening: potential use for compliance assessment in neonates.

PubMed

Guillet, Ronnie; Kwon, Jennifer M; Chen, Sixaio; McDermott, Michael P

2012-02-01

This study was done to determine if urine phenobarbital measurements provide a reliable indicator of presence of the drug in neonates. Urine was collected from neonates treated with phenobarbital for clinical indications within 4 to 6 hours of clinically indicated collection of serum phenobarbital levels. Urine samples were also collected from control neonates not treated with phenobarbital. One aliquot was assayed fresh, another frozen at -30°C and assayed 1 to 3 months later. Phenobarbital was assayed using the ONLINE TDM Roche/Hitachi automated clinical chemistry analyzer. Serum and urine concentrations were compared as were fresh and frozen urine measurements. Serum phenobarbital ranged from 5.6 to 52.7 μg/mL. Matched urine samples were 56.6 ± 12.5% of the serum level. Frozen samples were 98.3 ± 8.0% of the fresh samples. Urine phenobarbital concentrations, either fresh or frozen, can be used in neonates as a noninvasive estimate of drug levels.

Imaging and elemental mapping of biological specimens with a dual-EDS dedicated scanning transmission electron microscope.

PubMed

Wu, J S; Kim, A M; Bleher, R; Myers, B D; Marvin, R G; Inada, H; Nakamura, K; Zhang, X F; Roth, E; Li, S Y; Woodruff, T K; O'Halloran, T V; Dravid, Vinayak P

2013-05-01

A dedicated analytical scanning transmission electron microscope (STEM) with dual energy dispersive spectroscopy (EDS) detectors has been designed for complementary high performance imaging as well as high sensitivity elemental analysis and mapping of biological structures. The performance of this new design, based on a Hitachi HD-2300A model, was evaluated using a variety of biological specimens. With three imaging detectors, both the surface and internal structure of cells can be examined simultaneously. The whole-cell elemental mapping, especially of heavier metal species that have low cross-section for electron energy loss spectroscopy (EELS), can be faithfully obtained. Optimization of STEM imaging conditions is applied to thick sections as well as thin sections of biological cells under low-dose conditions at room and cryogenic temperatures. Such multimodal capabilities applied to soft/biological structures usher a new era for analytical studies in biological systems. Copyright © 2013 Elsevier B.V. All rights reserved.

Necroptosis may be a novel mechanism for cardiomyocyte death in acute myocarditis.

PubMed

Zhou, Fei; Jiang, Xuejun; Teng, Lin; Yang, Jun; Ding, Jiawang; He, Chao

2018-05-01

In this study, we investigated the roles of RIP1/RIP3 mediated cardiomyocyte necroptosis in CVB3-induced acute myocarditis. Serum concentrations of creatinine kinase (CK), CK-MB, and cardiac troponin I were detected using a Hitachi Automatic Biochemical Analyzer in a mouse model of acute VMC. Histological changes in cardiac tissue were observed by light microscope and expression levels of RIP1/RIP3 in the cardiac tissue were detected via Western blot and immunohistochemistry. The data showed that RIP1/RIP3 was highly expressed in cardiomyocytes in the acute VMC mouse model and that the necroptosis pathway specific blocker, Nec-1, dramatically reduced the myocardial damage by downregulating the expression of RIP1/RIP3. These findings provide evidence that necroptosis plays a significant role in cardiomyocyte death and it is a major pathway for cell death in acute VMC. Blocking the necroptosis pathway may serve as a new therapeutic option for the treatment of acute viral myocarditis.

Development of the water-lubricated thrust bearing of the hydraulic turbine generator

NASA Astrophysics Data System (ADS)

Inoue, K.; Deguchi, K.; Okude, K.; Fujimoto, R.

2012-11-01

In hydropower plant, a large quantities of turbine oil is used as machine control pressure oil and lubricating oil. If the oil leak out from hydropower plant, it flows into a river. And such oil spill has an adverse effect on natural environment because the oil does not degrade easily. Therefore the KANSAI and Hitachi Mitsubishi Hydro developed the water-lubricated thrust bearing for vertical type hydraulic turbine generator. The water-lubricated bearing has advantages in risk avoidance of river pollution because it does not need oil. For proceeding the development of the water-lubricated thrust bearing, we studied following items. The first is the examination of the trial products of water lubricating liquid. The second is the study of bearing structure which can satisfy bearing performance such as temperature characteristic and so on. The third is the mock-up testing for actual application in the future. As a result, it was found that the water-lubricated thrust bearing was technically applicable to actual equipments.

Plant maintenance and plant life extension issue, 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

The focus of the March-April issue is on plant maintenance and plant life extension. Major articles include the following: Exciting time to be at the U.S. NRC, by Dale Klein, Nuclear Regulatory Commission; Extraordinary steps to ensure a minimal environmental impact, by George Vanderheyden, UniStar Nuclear Energy, LLC.; Focused on consistent reduction of outages, by Kevin Walsh, GE Hitachi Nuclear Energy; On the path towards operational excellence, by Ricardo Perez, Westinghouse Electric Company; Ability to be refuelled on-line, by Ian Trotman, CANDU Services, Atomic Energy of Canada, Ltd.; ASCA Application for maintenance of SG secondary side, by Patrick Wagner, Wolfmore » Creek Nuclear Operating Corporation, Phillip Battaglia and David Selfridge, Westinghouse Electric Company; and, An integral part of the landscape and lives, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovation article is titled Steam generator bowl drain repairs, by John Makar and Richard Gimple, Wolf Creek Nuclear Operating Corporation.« less

Plant maintenance and advanced reactors, 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

2005-09-15

The focus of the September-October issue is on plant maintenance and advanced reactors. Major articles/reports in this issue include: First U.S. EPRs in 2015, by Ray Ganthner, Framatome ANP; Pursuing several opportunities, by William E. (Ed) Cummins, Westinghouse Electric Company; Vigorous plans to develop advanced reactors, by Yuliang Sun, Tsinghua University, China; Multiple designs, small and large, by Kumiaki Moriya, Hitachi Ltd., Japan; Sealed and embedded for safety and security, by Handa Norihiko, Toshiba Corporation, Japan; Scheduled online in 2010, by Johan Slabber, PMBR (Pty) Ltd., South Africa; Multi-application reactors, by Nikolay G. Kodochigov, OKBM, Russia; Six projects under budgetmore » and on schedule, by David F. Togerson, AECL, Canada; Creating a positive image, by Scott Peterson, Nuclear Energy Institute (NEI); Advanced plans for nuclear power's renaissance, by John Cleveland, International Atomic Energy Agency, Austria; and, Plant profile: last five outages in less than 20 days, by Beth Rapczynski, Exelon Nuclear.« less

Following the Fourth World Conference on Women -- Let's Expand Grass-Roots Networking! Proceedings of the International Forum on Intercultural Exchange (Saitama, Japan, November 15-17, 1995).

ERIC Educational Resources Information Center

National Women's Education Centre, Saitama (Japan).

Based on the success of the Fourth World Conference on Women, the National Women's Education Centre of Japan planned and carried out the 1995 International Forum on Intercultural Exchange to search for an up-to-date understanding of the problems of women and ways to solve them and to develop a network of already existing groups. This Forum focused…

[An oral function improvement program utilizing health behavior theories ameliorates oral functions and oral hygienic conditions of pre-frail elderly persons].

PubMed

Sakaguchi, Hideo

2014-06-01

Oral function improvement programs utilizing health behavior theories are considered to be effective in preventing the need for long-term social care. In the present study, an oral function improvement program based upon health behavior theories was designed, and its utility was assessed in 102 pre-frail elderly persons (33 males, 69 females, mean age: 76.9 +/- 5.7) considered to be in potential need of long-term social care and attending a long-term care prevention class in Sayama City, Saitama Prefecture, Japan. The degree of improvement in oral functions (7 items) and oral hygienic conditions (3 items) was assessed by comparing oral health before and after participation in the program. The results showed statistically significant improvements in the following oral functions: (1) lip functions (oral diadochokinesis, measured by the regularity of the repetition of the syllable "Pa"), (2) tongue functions, (3) tongue root motor skills (oral diadochokinesis, measured by the regularity of the repetition of the syllables "Ta" and "Ka"), (4) tongue extension/retraction, (5) side-to-side tongue movement functions, (6) cheek motor skills, and (7) repetitive saliva swallowing test (RSST). The following measures of oral hygiene also showed a statistically significant improvement: (1) debris on dentures or teeth, (2) coated tongue, and (3) frequency of oral cleaning. These findings demonstrated that an improvement program informed by health behavior theories is useful in improving oral functions and oral hygiene conditions.

Measurement of HRQL using EQ-5D in patients with type 2 diabetes mellitus in Japan.

PubMed

Sakamaki, Hiroyuki; Ikeda, Shunya; Ikegami, Naoki; Uchigata, Yasuko; Iwamoto, Yasuhiko; Origasa, Hideki; Otani, Toshiki; Otani, Yoichi

2006-01-01

We measured the health-related quality of life (HRQL) of diabetes mellitus patients using the Japanese version of EQ-5D, and examined the relationship between clinical condition and health status. A study was conducted on 220 patients with type 2 diabetes mellitus at a hospital in Saitama Prefecture on the day of their visit from November 17 to December 24, 1998. Patients evaluated their health status using five dimensions (5D) and a visual analog scale (VAS). The EQ-5D score was calculated based on the 5D responses using the Japanese version of the value set. There were no responses of "extreme problem." The frequency of "some problem" was significantly higher in patients with complications than in those without for mobility (27.4% and 14.4%) and anxiety/depression (25.7% and 13.5%). The mean EQ-5D score was 0.846 (95% confidence interval [CI] 0.817-0.874) in patients with complications versus 0.884 (95% CI 0.855-0.914) in those without complications. There was no statistically significant difference between VAS scores according to the presence or absence of diabetic complications, but a significant difference in VAS scores was seen according to the presence or absence of retinopathy. These findings suggest the value of measuring health status in diabetes mellitus patients, because it is able to comprehensively evaluate the patient's health condition, and add another dimension to the subjective symptoms and laboratory data.

High HPV vaccination uptake rates for adolescent girls after regional governmental funding in Shiki City, Japan.

PubMed

Hayashi, Y; Shimizu, Y; Netsu, S; Hanley, S; Konno, R

2012-08-10

In Japan, the bivalent HPV vaccine was approved in October, 2009 and became available as a non-routine vaccine from December, 2009. While routine vaccinations are free, the cost and responsibility for non-routine vaccinations are left to the individual. In exceptional circumstances regional governments fund non-routine vaccinations. This was the case in Shiki City, Saitama Prefecture, where a high uptake rate for individual (non-school based) HPV vaccination was obtained. On January 20, 2010, the mayor of Shiki City announced to the media his decision to vaccinate adolescent girls in Shiki City against HPV. A project team for HPV vaccination was set up in the city's Health Promotion Center. To gain mutual consent for HPV vaccination, senior health professionals, city officials, the head of the board of education, school principals and health-care teachers met several times. The cohort to be vaccinated was 1254 girls aged 12-15 years. Individual notifications were mailed to each girl on April 23, 2010, along with information about the HPV vaccine. As of April 10th, 2011, the uptake rate for girls aged 15 years old was 90.7% for the 1st dose. The vaccine registry is managed by the health care system of the city. The success of the HPV vaccination program and high uptake rates in Shiki City is a good model for the nationwide HPV vaccination program that started in February, 2011. Copyright © 2012 Elsevier Ltd. All rights reserved.

Prime Contract Awards Alphabetically by Contractor, by State or Country, and Place, FY 88. Part 9. (Giusti & Renshaw Construction-Hitachi America, Ltd.)

DTIC Science & Technology

1988-01-01

0000000000000-4-4 00 C-0 C- 0 0 Mol040 9L0 I c0N IW00000000110N00O X"- wo Ci 0 izo-4 ( 0KI o WI(0ON 0 0 C4 C-C-C-C-C-C-C-L9CC-0 C-I.- OC- 0 C-LI 0001...I r- r- rl r- r- o to V -* q1t v -4 -9t -4 Ln Ln Ln Ln 0 1 wotn< I N N C,4 N -4 Ln Ln -4 V 14 -4 -4 -4 00 Lf) U) Ul) Ln I CO a c) 1 -4 04 0) -e 0) tD

Prime Contract Awards Alphabetically by Contractor, by State or Country, and Place, FY 88. Part 10. (Hitachi Instruments, Inc.-International Cordage, Inc.)

DTIC Science & Technology

1988-01-01

4 4 4- . 44" loo 1 n 1NN Nl Nl " 4 0 r- r- r-r- r 1% - r.r- lr-..-r Pr l ’)0014 I 0 󈧄V 1 0 󈧄V 100 (10 I " jci "ci C,1 l 1 1 74cI 0 N NNN N 0 N 0e...0N N* 4C N SN C4 C1 SN 1000 1I-C4N N N NNNN C4c jci ,qr N NN ON 0.N(4N U) N UCN ZN I-4N C ZN 1’o00000𔃾) 000000000-)00000000 0 030 0 Q 0 0 0 100 ...1n0.4 - l00om 4 4- 44 4- 4- -4 4 -4 - -4 -4 .- 4-4-1 .-- 4 4 -4 ) -4 lOONi nI I nI I nI i nI I f u,v)lUI u 11) -4 100 -4 m (1 c’) mm ) mMIM ) mM) M c

The role of total laboratory automation in a consolidated laboratory network.

PubMed

Seaberg, R S; Stallone, R O; Statland, B E

2000-05-01

In an effort to reduce overall laboratory costs and improve overall laboratory efficiencies at all of its network hospitals, the North Shore-Long Island Health System recently established a Consolidated Laboratory Network with a Core Laboratory at its center. We established and implemented a centralized Core Laboratory designed around the Roche/Hitachi CLAS Total Laboratory Automation system to perform the general and esoteric laboratory testing throughout the system in a timely and cost-effective fashion. All remaining STAT testing will be performed within the Rapid Response Laboratories (RRLs) at each of the system's hospitals. Results for this laboratory consolidation and implementation effort demonstrated a decrease in labor costs and improved turnaround time (TAT) at the core laboratory. Anticipated system savings are approximately $2.7 million. TATs averaged 1.3 h within the Core Laboratory and less than 30 min in the RRLs. When properly implemented, automation systems can reduce overall laboratory expenses, enhance patient services, and address the overall concerns facing the laboratory today: job satisfaction, decreased length of stay, and safety. The financial savings realized are primarily a result of labor reductions.

Electrochemical evaluation of the corrosion resistance of cup-yoke-type dental magnetic attachments.

PubMed

Takada, Yukyo; Takahashi, Masatoshi; Kikuchi, Akira; Tenkumo, Taichi

2014-01-01

The corrosion resistance of different magnetic assemblies—Magfit DX800 (Aichi Steel), Gigauss D800 (GC), Hyper Slim 4013, and Hicorex Slim 4013 (Hitachi Metals)—were electrochemically evaluated using anodic polarization curves obtained in 0.9% NaCl solution at 37°C. Stainless steels (444, XM27, 447J1, and 316L) composing the magnetic assemblies were also examined as controls. This revealed that all of the magnetic assemblies break down at 0.6-1.1 V; however, their breakdown potentials were all still significantly higher (p<0.05) than that of 316L. The distribution of elements in the laser welding zone between the yoke and shield ring was analyzed using EPMA; except with Magfit DX800, where the Cr content of the shield ring weld was greater than that of 316L. These magnetic assemblies are expected to have good corrosion resistance in the oral cavity, as their breakdown potentials are sufficiently higher than the 316L commonly used as a surgical implant material.

Atomic imaging using secondary electrons in a scanning transmission electron microscope: experimental observations and possible mechanisms.

PubMed

Inada, H; Su, D; Egerton, R F; Konno, M; Wu, L; Ciston, J; Wall, J; Zhu, Y

2011-06-01

We report detailed investigation of high-resolution imaging using secondary electrons (SE) with a sub-nanometer probe in an aberration-corrected transmission electron microscope, Hitachi HD2700C. This instrument also allows us to acquire the corresponding annular dark-field (ADF) images both simultaneously and separately. We demonstrate that atomic SE imaging is achievable for a wide range of elements, from uranium to carbon. Using the ADF images as a reference, we studied the SE image intensity and contrast as functions of applied bias, atomic number, crystal tilt, and thickness to shed light on the origin of the unexpected ultrahigh resolution in SE imaging. We have also demonstrated that the SE signal is sensitive to the terminating species at a crystal surface. A possible mechanism for atomic-scale SE imaging is proposed. The ability to image both the surface and bulk of a sample at atomic-scale is unprecedented, and can have important applications in the field of electron microscopy and materials characterization. Copyright © 2010 Elsevier B.V. All rights reserved.

Secondary barrier construction for vessels carrying spherical low temperature liquefied gas storage tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okamoto, T.; Nishimoto, T.; Sawada, K.

1978-05-16

To simplify and thus reduce the cost of the secondary barrier for spherical LNG storage tanks onboard ocean-transport vessels, Japan's Hitachi Shipbuilding and Engineering Co., Ltd., has developed a new secondary-containment system that allows easy installation directly on the cargo hold's bottom plate beneath the spherical tank. The new system comprises at least two layers of rigid-foam synthetic resin sprayed on the hold plates and covered by a layer of glass mesh and adhesive. Alternatively, the layers of synthetic resin, glass mesh, and adhesive are applied to plywood attached to the hold plates by joists, thus forming an air spacemore » between the secondary barrier and the hold plates. Where the hold plates have a multisurface construction, (1) laminated rigid urethane foam blocks are butted end-to-end and are bonded to each other and to the plywood sheets at the corners between adjacent hold plates, (2) the spray-formed layers are applied between the blocks, and (3) the entire assembly is covered by a protective layer of glass mesh and adhesive.« less

Evaluation of the Technicon Axon analyser.

PubMed

Martínez, C; Márquez, M; Cortés, M; Mercé, J; Rodriguez, J; González, F

1990-01-01

An evaluation of the Technicon Axon analyser was carried out following the guidelines of the 'Sociedad Española de Química Clínica' and the European Committee for Clinical Laboratory Standards.A photometric study revealed acceptable results at both 340 nm and 404 nm. Inaccuracy and imprecision were lower at 404 nm than at 340 nm, although poor dispersion was found at both wavelengths, even at low absorbances. Drift was negligible, the imprecision of the sample pipette delivery system was greater for small sample volumes, the reagent pipette delivery system imprecision was acceptable and the sample diluting system study showed good precision and accuracy.Twelve analytes were studied for evaluation of the analyser under routine working conditions. Satisfactory results were obtained for within-run imprecision, while coefficients of variation for betweenrun imprecision were much greater than expected. Neither specimenrelated nor specimen-independent contamination was found in the carry-over study. For all analytes assayed, when comparing patient sample results with those obtained in a Hitachi 737 analyser, acceptable relative inaccuracy was observed.

Plant maintenance and plant life extension issue, 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

The focus of the March-April issue is on plant maintenance and plant life extension. Major articles include the following: Application of modeling and simulation to nuclear power plants, by Berry Gibson, IBM, and Rolf Gibbels, Dassault Systems; Steam generators with tight manufacturing procedures, by Ei Kadokami, Mitsubishi Heavy Industries; SG design based on operational experience and R and D, by Jun Tang, Babcock and Wilcox Canada; Confident to deliver reliable performance, by Bruce Bevilacqua, Westinghouse Nuclear; An evolutionary plant design, by Martin Parece, AREVA NP, Inc.; and, Designed for optimum production, by Danny Roderick, GE Hitachi Nuclear Energy. Industry Innovationmore » articles include: Controlling alloy 600 degradation, by John Wilson, Exelon Nuclear Corporation; Condensate polishing innovation, by Lewis Crone, Dominion Millstone Power Station; Reducing deposits in steam generators, by the Electric Power Research Institute; and, Minimizing Radiological effluent releases, by the Electric Power Research Institute. The plant profile article is titled 2008 - a year of 'firsts' for AmerenUE's Callaway plant, by Rick Eastman, AmerenUE.« less

Trace Assessment for BWR ATWS Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, L.Y.; Diamond, D.; Arantxa Cuadra, Gilad Raitses, Arnold Aronson

2010-04-22

A TRACE/PARCS input model has been developed in order to be able to analyze anticipated transients without scram (ATWS) in a boiling water reactor. The model is based on one developed previously for the Browns Ferry reactor for doing loss-of-coolant accident analysis. This model was updated by adding the control systems needed for ATWS and a core model using PARCS. The control systems were based on models previously developed for the TRAC-B code. The PARCS model is based on information (e.g., exposure and moderator density (void) history distributions) obtained from General Electric Hitachi and cross sections for GE14 fuel obtainedmore » from an independent source. The model is able to calculate an ATWS, initiated by the closure of main steam isolation valves, with recirculation pump trip, water level control, injection of borated water from the standby liquid control system and actuation of the automatic depres-surization system. The model is not considered complete and recommendations are made on how it should be improved.« less

Measures of Urinary Protein and Albumin in the Prediction of Progression of IgA Nephropathy

PubMed Central

Zhao, Yan-feng; Liu, Li-jun; Shi, Su-fang; Lv, Ji-cheng; Zhang, Hong

2016-01-01

Background and objectives Proteinuria is an independent predictor for IgA nephropathy (IgAN) progression. Urine albumin-to-creatinine ratio (ACR), protein-to-creatinine ratio, and 24-hour urine protein excretion (UPE) are widely used for proteinuria evaluation in clinical practice. Here, we evaluated the association of these measurements with clinical and histologic findings of IgAN and explored which was the best predictor of IgAN prognosis. Design, setting, participants, & measurements Patients with IgAN were followed up for ≥12 months, were diagnosed between 2003 and 2012, and had urine samples available (438 patients). Spot urine ACR, protein-to-creatinine ratio, and 24-hour UPE at the time of renal biopsy were measured on a Hitachi Automatic Biochemical Analyzer 7180 (Hitachi, Yokohama, Japan). Results In our patients, ACR, protein-to-creatinine ratio, and 24-hour UPE were highly correlated (correlation coefficients: 0.71–0.87). They showed good relationships with acknowledged markers reflecting IgAN severity, including eGFR, hypertension, and the biopsy parameter (Oxford severity of tubular atrophy/interstitial fibrosis parameter). However, only ACR presented with positive association with the Oxford segmental glomerulosclerosis/adhesion parameter and extracapillary proliferation lesions. The follow-up time was 37.0 (22.0–58.0) months, with the last follow-up on April 18, 2014. In total, 124 patients reached the composite end point (30% eGFR decline, ESRD, or death). In univariate survival analysis, ACR consistently had better performance than protein-to-creatinine ratio and 24-hour UPE as represented by higher area under the curve using time–dependent survival analysis. When adjusted for well known risk factors for IgAN progression, ACR was most significantly associated with the composite end point (hazard ratio, 1.56 per 1-SD change of standard normalized square root–transformed ACR; 95% confidence interval, 1.29 to 1.89; P<0.001). Compared with

Semantic Segmentation and Difference Extraction via Time Series Aerial Video Camera and its Application

NASA Astrophysics Data System (ADS)

Amit, S. N. K.; Saito, S.; Sasaki, S.; Kiyoki, Y.; Aoki, Y.

2015-04-01

Google earth with high-resolution imagery basically takes months to process new images before online updates. It is a time consuming and slow process especially for post-disaster application. The objective of this research is to develop a fast and effective method of updating maps by detecting local differences occurred over different time series; where only region with differences will be updated. In our system, aerial images from Massachusetts's road and building open datasets, Saitama district datasets are used as input images. Semantic segmentation is then applied to input images. Semantic segmentation is a pixel-wise classification of images by implementing deep neural network technique. Deep neural network technique is implemented due to being not only efficient in learning highly discriminative image features such as road, buildings etc., but also partially robust to incomplete and poorly registered target maps. Then, aerial images which contain semantic information are stored as database in 5D world map is set as ground truth images. This system is developed to visualise multimedia data in 5 dimensions; 3 dimensions as spatial dimensions, 1 dimension as temporal dimension, and 1 dimension as degenerated dimensions of semantic and colour combination dimension. Next, ground truth images chosen from database in 5D world map and a new aerial image with same spatial information but different time series are compared via difference extraction method. The map will only update where local changes had occurred. Hence, map updating will be cheaper, faster and more effective especially post-disaster application, by leaving unchanged region and only update changed region.

Somatic mutation frequencies in the stamen hairs of Tradescantia grown in soil samples from the Bikini Island.

PubMed

Ichikawa, S; Ishii, C

1991-02-01

Somatic pink mutation frequencies in the stamen hairs of Tradescantia BNL 02 clone grown for 76 days in two soil samples taken from the Bikini Island (where a hydrogen bomb explosion test had been conducted in 1954) were investigated. A significantly high mutation frequency (2.58 +/- 0.17 pink mutant events per 10(3) hairs or 1.34 +/- 0.09 pink mutant events per 10(4) hair-cell divisions) was observed for the plant grown in one of the two Bikini soil samples, as compared to the control plants (1.70 +/- 0.14 or 0.88 +/- 0.07, respectively) grown in the field soil of Saitama University. The soil sample which caused the significant increase in mutation frequency contained 6,880 +/- 330 mBq/g 137Cs, 62.5 +/- 4.4 mBq/g 60Co, and some other nuclides; a 150 microR/hr exposure rate being measured on the surface of the soil sample. The effective cumulative external exposures measured for the inflorescences of the plant grown in this soil sample averaged at most 60.8 mR, being too small to explain the significant elevation in mutation frequency observed. On the other hand, internal exposure due to uptake of radioactive nuclides was estimated to be 125 mrad (1.25 mGy) as an accumulated effective dose, mainly based on a gamma-spectrometrical analysis. However, it seemed highly likely that this value of internal exposure was a considerable underestimate, and the internal exposure was considered to be more significant than the external exposure.

Aerobic composting of waste activated sludge: Kinetic analysis for microbiological reaction and oxygen consumption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamada, Y.; Kawase, Y.

2006-07-01

In order to examine the optimal design and operating parameters, kinetics for microbiological reaction and oxygen consumption in composting of waste activated sludge were quantitatively examined. A series of experiments was conducted to discuss the optimal operating parameters for aerobic composting of waste activated sludge obtained from Kawagoe City Wastewater Treatment Plant (Saitama, Japan) using 4 and 20 L laboratory scale bioreactors. Aeration rate, compositions of compost mixture and height of compost pile were investigated as main design and operating parameters. The optimal aerobic composting of waste activated sludge was found at the aeration rate of 2.0 L/min/kg (initial compostingmore » mixture dry weight). A compost pile up to 0.5 m could be operated effectively. A simple model for composting of waste activated sludge in a composting reactor was developed by assuming that a solid phase of compost mixture is well mixed and the kinetics for microbiological reaction is represented by a Monod-type equation. The model predictions could fit the experimental data for decomposition of waste activated sludge with an average deviation of 2.14%. Oxygen consumption during composting was also examined using a simplified model in which the oxygen consumption was represented by a Monod-type equation and the axial distribution of oxygen concentration in the composting pile was described by a plug-flow model. The predictions could satisfactorily simulate the experiment results for the average maximum oxygen consumption rate during aerobic composting with an average deviation of 7.4%.« less

Clinical behavior of Japanese community pharmacists for preventing prescription drug overdose.

PubMed

Shimane, Takuya; Matsumoto, Toshihiko; Wada, Kiyoshi

2015-04-01

Prescription drug abuse, including benzodiazepines, is a growing health problem in Japan. This study examined the community pharmacist's clinical behavior regarding patients who overdose on prescribed drugs, and explored the possibility of overdose prevention by community pharmacists. We surveyed all registered community pharmacies with dispensing functions (n = 1867) in the Saitama Pharmaceutical Association. An anonymous self-administered questionnaire was mailed to each pharmacy. Respondents were asked about clinical behavior such as medication counseling and referral to the prescriber if prescription drug overdose was identified. Among respondents, 26% of community pharmacists reported clinical experience of working with patients who overdosed on prescribed drugs in the previous year. Half of respondents evaluated their practice such as medication counseling and referral to the prescriber as 'good'. On multivariate analysis, a 'poor' self-evaluation of referral to the prescriber was significantly associated with the following perceptions: 'insufficient confidence in communication with prescribers' (odds ratio [OR], 2.7; 95% confidence interval [95%CI]: 1.4-5.3), and 'to avoid trouble with prescribers' (OR, 1.7; 95%CI: 1.0-2.7). Japanese community pharmacists could prevent prescription drug abuse in their practice, but the pharmacists who have insufficient confidence in communication with prescribers and who are afraid of trouble with a prescriber, reported poor self-evaluation for referral to the prescribers. All prescribers should understand the importance of referral by community pharmacists, to assist community pharmacists in playing a critical role in prevention of prescription drug abuse. © 2014 The Authors. Psychiatry and Clinical Neurosciences © 2014 Japanese Society of Psychiatry and Neurology.

Simultaneous effect of crystal lattice and non magnetic substitution on magnetic properties of barium hexaferrite

NASA Astrophysics Data System (ADS)

Kumar, Sunil; Supriya, Sweety; Pradhan, Lagen Kumar; Pandey, Rabichandra; Kar, Manoranjan

2018-05-01

The aluminium doped barium hexaferrite BaFe12-xAlxO19 with x =0.0, 1.0, 2.0, 4.0 and 6.0 have been synthesized by the sol-gel method to modify the magnetic properties for technological applications. The crystal structure and phase purity of all the samples have been explored by employing the X-ray diffraction (XRD) technique. It confirms that the sample is nanocrystalline, hexagonal symmetry and all the intense peaks could be indexed to the P63/mmc space group. The obtained lattice parameters from the XRD analysis decrease with the increase in Al3+ content in the samples. The microstructural morphology and particle sizes of all samples were studied by using the Field Emission Scanning Electron Microscopy (FESEM-Hitachi-S4800) technique. The magnetic hysteresis (M-H) loops measurement has been carried out at room temperature by employing the vibrating sample magnetometer (VSM) over a field range of +20 kOe to -20 kOe. The magnetic hysteresis (M-H) loops revealed the ferromagnetic (hard magnetic materials) nature of the samples and, analyzed by using the Law of Approach to Saturation.

[Frequency distribution of dibucaine numbers in 24,830 patients].

PubMed

Pestel, G; Sprenger, H; Rothhammer, A

2003-06-01

Atypical cholinesterase prolongs the duration of neuromuscular blocking drugs such as succinylcholine and mivacurium. Measuring the dibucaine number identifies patients who are at risk. This study shows the frequency distribution of dibucaine numbers routinely measured and discusses avoidable clinical problems and economic implications. Dibucaine numbers were measured on a Hitachi 917-analyzer and all dibucaine numbers recorded over a period of 4 years were taken into consideration. Repeat observations were excluded. A total of 24,830 dibucaine numbers were analysed and numbers below 30 were found in 0.07% ( n=18) giving an incidence of 1:1,400. Dibucaine numbers from 30 to 70 were found in 1.23% ( n=306). On the basis of identification of the Dibucaine numbers we could avoid the administration of succinylcholine or mivacurium resulting in a cost reduction of 12,280 Euro offset against the total laboratory costs amounting to 10,470 Euro. An incidence of 1:1,400 of dibucaine numbers below 30 is higher than documented in the literature. Therefore, routine measurement of dibucaine number is a cost-effective method of identifying patients at increased risk of prolonged neuromuscular blockade due to atypical cholinesterase.

Clinical determination of glucose in human serum by a tomato skin biosensor.

PubMed

Han, Hui; Li, Yi; Yue, Huan; Zhou, Zaide; Xiao, Dan; Choi, Martin M F

2008-09-01

Glucose biosensors based on enzyme reaction of glucose oxidase were studied because the symptomatic therapy of diabetes mellitus requires reliable assessment of blood glucose level at frequent intervals. Tomato skin membranes have been successfully employed to entrap glucose oxidase for fabrication of glucose biosensor. Glucose oxidase was immobilized onto the tomato skin and the enzyme membrane was then positioned on the surface of an oxygen electrode. The glucose concentration was quantified by the change of dissolved oxygen. All the serum samples were also simultaneously determined by a Hitachi 7060 chemistry analyzer. The response of the biosensor showed a linear relationship with a concentration range of 1.0-30.0 mmol/l glucose. The limit of detection was 0.20 mmol/l. Error Grid analysis demonstrated that 100% of the results fell within clinically acceptable zones A and B. The F- and t-tests showed no significant differences between the 2 methods. The recovery was 95.0-110.0% for 30 serum samples analysis. The tomato skin biosensor possesses the advantages of simple fabrication, fast response time, low cost and high sensitivity. The results of our method are more accurate than and match well with the current clinical instrument method.

SEM Imaging and Chemical Analysis of Aerosol Particles from Surface and Hi-altitudes in New Jersey.

NASA Astrophysics Data System (ADS)

Bandamede, M.; Boaggio, K.; Bancroft, L.; Hurler, K.; Magee, N. B.

2016-12-01

We report on Scanning Electron Microscopy analysis of aerosol particle morphology and chemistry. The work includes the first comparative SEM analysis of aerosol particles captured by balloon at high altitude. The particles were acquired in an urban/suburban environment in central New-Jersey. Particles were sampled from near the surface using ambient air filtration and at high-altitudes using a novel balloon-borne instrument (ICE-Ball, see abstract by K. Boaggio). Particle images and 3D geometry are acquired by a Hitachi SU-5000 SEM, with resolution to approximately 3 nm. Elemental analysis on particles is provided by Energy Dispersive X-Ray Spectroscopy (EDS, EDAX, Inc.). Uncoated imaging is conducted in low vacuum within the variable-pressure SEM, which provides improved detection and analysis of light-element compositions including Carbon. Preliminary results suggest that some similar particle types and chemical species are sampled at both surface and high-altitude. However, as expected, particle morphologies, concentrations, chemistry, and apparent origin vary significantly at different altitudes and under different atmospheric flow regimes. Improved characterization of high-altitude aerosol particles, and differences from surface particulate composition, may advance inputs for atmospheric cloud and radiation models.

Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter.

PubMed

Priftis, Alexandros; Stagos, Dimitrios; Tzioumakis, Nikolaos; Konstantinopoulos, Konstantinos; Patouna, Anastasia; Papadopoulos, Georgios E; Tsatsakis, Aristides; Kouretas, Dimitrios

2016-08-30

Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices) in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

Low-pressure clathrate-hydrate formation in amorphous astrophysical ice analogs

NASA Technical Reports Server (NTRS)

Blake, D. F.; Allamandola, L. J.; Sandford, S.; Hudgins, D.; Freund, F.

1991-01-01

In modeling cometary ice, the properties of clathrate hydrates were used to explain anomalous gas release at large radial distances from the Sun, and the retention of particular gas inventories at elevated temperatures. Clathrates may also have been important early in solar system history. However, there has never been a reasonable mechanism proposed for clathrate formation under the low pressures typical of these environments. For the first time, it was shown that clathrate hydrates can be formed by warming and annealing amorphous mixed molecular ices at low pressures. The complex microstructures which occur as a result of clathrate formation from the solid state may provide an explanation for a variety of unexplained phenomena. The vacuum and imaging systems of an Hitachi H-500H Analytical Electron Microscope was modified to study mixed molecular ices at temperatures between 12 and 373 K. The resulting ices are characterized by low-electron dose Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED). The implications of these results for the mechanical and gas release properties of comets are discussed. Laboratory IR data from similar ices are presented which suggest the possibility of remotely observing and identifying clathrates in astrophysical objects.

Plant maintenance and advanced reactors issue, 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agnihotri, Newal

The focus of the September-October issue is on plant maintenance and advanced reactors. Major articles/reports in this issue include: Technologies of national importance, by Tsutomu Ohkubo, Japan Atomic Energy Agency, Japan; Modeling and simulation advances brighten future nuclear power, by Hussein Khalil, Argonne National Laboratory, Energy and desalination projects, by Ratan Kumar Sinha, Bhabha Atomic Research Centre, India; A plant with simplified design, by John Higgins, GE Hitachi Nuclear Energy; A forward thinking design, by Ray Ganthner, AREVA; A passively safe design, by Ed Cummins, Westinghouse Electric Company; A market-ready design, by Ken Petrunik, Atomic Energy of Canada Limited, Canada;more » Generation IV Advanced Nuclear Energy Systems, by Jacques Bouchard, French Commissariat a l'Energie Atomique, France, and Ralph Bennett, Idaho National Laboratory; Innovative reactor designs, a report by IAEA, Vienna, Austria; Guidance for new vendors, by John Nakoski, U.S. Nuclear Regulatory Commission; Road map for future energy, by John Cleveland, International Atomic Energy Agency, Vienna, Austria; and, Vermont's largest source of electricity, by Tyler Lamberts, Entergy Nuclear Operations, Inc. The Industry Innovation article is titled Intelligent monitoring technology, by Chris Demars, Exelon Nuclear.« less

Influence of Grand Multiparity on the Levels of Insulin, Glucose and HOMA-IR in Comparison with Nulliparity and Primiparity.

PubMed

Eldin Ahmed Abdelsalam, Kamal; Alobeid M Elamin, Abdelsamee

2017-01-01

It is to compare the levels of fasting glucose and insulin as well as insulin resistance in grand multiparas with primiparity and nulliparity. Fasting blood samples were collected from 100 non-pregnant ladies as control group, 100 primiparity pregnant women and 100 grand multiparity pregnant women. Glucose (FBS) and insulin (FSI) concentrations were measured by Hitachi 912 full automated Chemistry Analyzer (Roche Diagnostics, Germany) as manufacturer procedure. Insulin resistance was calculated following the formula: FBG (mg dL-1)×FSI (μU mL-1)/405. This study found a significant reduction in glucose level in primiparity when compared to control group but it was increased significantly in multiparity comparing to primiparity and control. Insulin level showed significant high concentrations in pregnant women and increased significantly in grand multiparas comparing to primiparas and controls. As a result of that, HOMA-IR was increased significantly by increasing of parity. Also, there was a significant increase in fasting insulin and a decrease in insulin sensitivity with parity with association to age and obesity. Grand multiparity is associated with an increased risk of subsequent clinical insulin resistance (HOMA-IR).

PREFACE Preface

NASA Astrophysics Data System (ADS)

Takahashi, Migaku; Saito, Hitoshi; Yoshimura, Satoru; Takanashi, Koki; Sahashi, Masashi; Tsunoda, Masakiyo

2011-01-01

23 countries, with about 40 percent of participants attending from overseas (see figure). The program involved 4 plenary talks (45 minutes each), 37 invited talks (30 minutes), 85 contributed talks (15 minutes), and 352 posters. Pie chart Organizing Committee of ISAMMA 2010 M TakahashiTohoku Univ., Japan, Chairman K TakanashiTohoku Univ., Japan, Chair of the Program Committee H SaitoAkita Univ., Japan, Chair of the Publication Committee M SahashiTohoku Univ., Japan, Chair of the Treasury Committee M TsunodaTohoku Univ., Japan, General Secretary H AkinagaAIST, Japan H FukunagaNagasaki Univ., Japan K HonoNIMS, Japan S IshioAkita Univ., Japan S IwataNagoya Univ., Japan K NakagawaNihon Univ., Japan S NakagawaTokyo Inst. of Tech., Japan T OnoKyoto Univ., Japan Y SuzukiOsaka Univ., Japan M TanakaEhime Univ., Japan T Tanaka Univ. of Tokyo, Japan Program Committee of ISAMMA 2010 K TakanashiTohoku Univ., Japan, ChairS MizukamiTohoku Univ., Japan M MizuguchiTohoku Univ., Japan, Vice-chairH NaganumaTohoku Univ., Japan M DoiTohoku Univ., JapanS NakagawaTokyo Inst. of Tech., Japan A FujitaTohoku Univ., JapanK NakamuraTohoku Univ., Japan K IshiyamaTohoku Univ., JapanK OnoKEK, Japan T KatoNagoya Univ., JapanT OnoKyoto Univ., Japan T KawagoeOsaka Pref. Univ.of Edu., JapanF SatoTohoku Univ., Japan O KitakamiTohoku Univ., JapanM ShiraiTohoku Univ., Japan Y KitamotoTokyo Inst. of Tech., JapanS SugimotoTohoku Univ., Japan F MatsukuraTohoku Univ., JapanM YamaguchiTohoku Univ., Japan C MitsumataHitachi Metals, Japan Publication Committee of ISAMMA 2010 H SaitoAkita Univ., Japan, ChairS MitaniNIMS, Japan S YoshimuraAkita Univ., Japan, Vice-chairH MuraokaTohoku, Japan Y AndoTohoku Univ., JapanM NakanoNagasaki Univ., Japan J AriakeAIT, JapanR NakataniOsaka Univ., Japan H AsanoNagoya Univ., JapanK O'GradyUniv. of York, UK M FutamotoChuo Univ., JapanA SakumaTohoku Univ., Japan J HayakawaHitachi, ARL, JapanT SatoKeio Univ., Japan T HondaKyushu Inst. of Tech., JapanT SatoShinshu Univ., Japan M

Effects of annealing on the structure and magnetic properties of Fe80B20 magnetostrictive fibers.

PubMed

Zhu, Qianke; Zhang, Shuling; Geng, Guihong; Li, Qiushu; Zhang, Kewei; Zhang, Lin

2016-07-04

Fe80B20 amorphous alloys exhibit excellent soft magnetic properties, high abrasive resistance and outstanding corrosion resistance. In this work, Fe80B20 amorphous micro-fibers with HC of 3.33 Oe were firstly fabricated and the effects of annealing temperature on the structure and magnetic properties of the fibers were investigated. In this study, Fe80B20 amorphous fibers were prepared by the single roller melt-spinning method. The structures of as-spun and annealed fibers were investigated by X-ray diffractometer (XRD) (PANalytical X,Pert Power) using Cu Kα radiation. The morphology of the fibers was observed by scanning electron microscopy (SEM) (HITACHI-S4800). Differential scanning calorimetry (DSC) measurements of the fibers were performed on Mettler Toledo TGA/DSC1 device under N2 protection. Vibrating sample magnetometer (VSM, Versalab) was used to examine the magnetic properties of the fibers. The resonance behavior of the fibers was characterized by an impedance analyzer (Agilent 4294A) with a home-made copper coil. The X-ray diffusion (XRD) patterns show that the fibers remain amorphous structure until the annealing temperature reaches 500°C. The differential scanning calorimetry (DSC) results show that the crystallization temperature of the fibers is 449°C. The crystallization activation energy is calculated to be 221 kJ/mol using Kissinger formula. The scanning electron microscopy (SEM) images show that a few dendrites appear at the fiber surface after annealing. The result indicates that the coercivity HC (//) and HC (⊥) slightly increases with increasing annealing temperature until 400°C, and then dramatically increases with further increasing annealing temperature which is due to significant increase in magneto-crystalline anisotropy and magneto-elastic anisotropy. The Q value firstly increases slightly when the annealing temperature rises from room temperature (RT) to 300°C, then decreases until 400°C. Eventually, the value of Q increases to

Effects of Temperature on Solute Transport Parameters in Differently-Textured Soils at Saturated Condition

NASA Astrophysics Data System (ADS)

Hamamoto, S.; Arihara, M.; Kawamoto, K.; Nishimura, T.; Komatsu, T.; Moldrup, P.

2014-12-01

Subsurface warming driven by global warming, urban heat islands, and increasing use of shallow geothermal heating and cooling systems such as the ground source heat pump, potentially causes changes in subsurface mass transport. Therefore, understanding temperature dependency of the solute transport characteristics is essential to accurately assess environmental risks due to increased subsurface temperature. In this study, one-dimensional solute transport experiments were conducted in soil columns under temperature control to investigate effects of temperature on solute transport parameters, such as solute dispersion and diffusion coefficients, hydraulic conductivity, and retardation factor. Toyoura sand, Kaolin clay, and intact loamy soils were used in the experiments. Intact loamy soils were taken during a deep well boring at the Arakawa Lowland in Saitama Prefecture, Japan. In the transport experiments, the core sample with 5-cm diameter and 4-cm height was first isotropically consolidated, whereafter 0.01M KCl solution was injected to the sample from the bottom. The concentrations of K+ and Cl- in the effluents were analyzed by an ion chromatograph to obtain solute breakthrough curves. The solute transport parameters were calculated from the breakthrough curves. The experiments were conducted under different temperature conditions (15, 25, and 40 oC). The retardation factor for the intact loamy soils decreased with increasing temperature, while water permeability increased due to reduced viscosity of water at higher temperature. Opposite, the effect of temperature on solute dispersivity for the intact loamy soils was insignificant. The effects of soil texture on the temperature dependency of the solute transport characteristics will be further investigated from comparison of results from differently-textured samples.

[Influenza telephone consultation target the general public--2003-2004, 2004-2005].

PubMed

Yamadera, Shizuko; Kobune, Fumio; Komatsu, Toshihiko; Suzuki, Kazuyoshi; Nakayama, Mikio; Hagiwara, Toshikatsu; Matsumoto, Miyako; Yamamoto, Kiichi; Renard, Junko; Oya, Akira

2007-07-01

The NPO Biomedical Science Association provided telephone consultation, including contacts by fax and email, targeting the general public within the framework of influenza control measures worked out by the Japanese Ministry of Health, Labor and Welfare (MHLW). We received 2,813 inquiries during the 2003-2004 flu season and 2,444 inquiries during the 2004-2005 season. By month, the highest number was in October-November, accounting for 42.6%. The preceding season showed a similar trend. By gender, 72.5% of those seeking advice were women. By area of residence, the highest number was living in metropolitan Tokyo, and the remainder lived in the prefectures of Kanagawa, Chiba, Saitama, Nagano, Shizuoka, and Ibaraki in this order. We received no inquiries from the prefectures of Shimane or Saga. By occupation, housewives accounted for 1,114 inquiries (45.6%), followed by private companies with 447 inquiries (18.3%) and health-care providers with 227 inquiries (9.3%), similar to the 2003-2004 flu season. By subject, 1,545 inquiries concerned vaccines (62.2%) mainly, the pros and cons of vaccination, adverse reactions, and the number of inoculations required. Inquiries about pregnancy, infants and young children, and breast-feeding accounted for 19.2%. Inquiries on vaccine shortages during the 2004-2005 flu season (7), SARS (22), and bird flu (22) decreased compared to the previous season, while the number of consultations on antiviral agents increased (209). In discussing how information on influenza should be communicated to the public, we propose that "Influenza Q & A" provided by the Infectious Diseases Surveillance Center of the NIID, MHLW, should include information on influenza specifically addressing pregnant woman and breast-feeding or child-rearing mothers.

Long-Term Survival in Patients With Acute Kidney Injury After Acute Type A Aortic Dissection Repair.

PubMed

Sasabuchi, Yusuke; Kimura, Naoyuki; Shiotsuka, Junji; Komuro, Tetsuya; Mouri, Hideyuki; Ohnuma, Tetsu; Asaka, Kayo; Lefor, Alan K; Yasunaga, Hideo; Yamaguchi, Atsushi; Adachi, Hideo; Sanui, Masamitsu

2016-12-01

Although acute kidney injury (AKI) is known as a serious complication after operation for acute type A aortic dissection (AAAD), the long-term impact of AKI remains unclear. The aim of the present study is to investigate the long-term survival in patients with AKI after operation for AAAD. This study included 403 patients who underwent operation for AAAD from 1990 to 2011 at Jichi Medical University, Saitama Medical Center. Postoperative AKI was identified according to the Kidney Disease Improving Global Outcomes criteria. Kaplan-Meier survival analysis and Cox proportional hazards regression were modeled to analyze the association between the AKI stage and postoperative long-term survival. Of 403 patients, 181 (44.9%) experienced postoperative AKI. Kaplan-Meier estimates for long-term survival were significantly different among patients without AKI and patients with stage 1, 2, and 3 AKI (p < 0.001). Hazard ratios of long-term survival for patients with stages 1, 2, and 3 AKI compared with patients without AKI were 1.38 (95% confidence interval [CI]: 0.84 to 2.26), 1.82 (95% CI: 0.95 to 3.51), and 3.79 (95% CI: 1.95 to 7.37), respectively. More patients with AKI died because of cardiovascular disease after discharge than patients without AKI (1.8% versus 6.0%, p = 0.03). Stage 3 AKI is significantly associated with lower long-term survival after operation for AAAD. Patient follow-up after discharge that focuses on cardiovascular issues may benefit patients who survive AKI after AAAD operation. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

[Characteristics of social activity of the elderly who belong to senior citizens].

PubMed

Takahashi, Mihoko; Shibazaki, Satomi; Nagai, Masaki

2003-10-01

The purpose of this study was to clarify environmental conditions determining the social activities of the elderly, by analyzing levels of activity in individuals belonging to clubs for senior citizens. In 1998, we conducted a survey of over 10,000 elderly subjects, 65 years of age or older, who belonged to 228 clubs for senior citizens in a region of Saitama Prefecture, using a 'Check list' developed for self-evaluation of social activities. The proportions of 'active' and 'inactive' seniors, as judged by the 'Check list' for each of the four different aspects of social activities (1. individual activities, 2. social participation/volunteering, 3. education/training, 4. employment), were compared with those of the standard elderly population. Two hundred and seven clubs for senior citizens (90.8%) participated in this study. About 82.0% of the members of each club filled out the 'Check list'. High levels as compared to the standard population were demonstrated for two aspects of social activity: individual activity and social participation/volunteering. Women had higher levels of both types of social activity than men. Men aged 74 years or younger had lower than average levels for three aspects of social activity: social participation/volunteering, education/training, and employment. Members who resided in urban areas with easy access had higher levels of individual activity, social participation/volunteering and education/training. On the other hand, those residing in suburbs with large spaces for agriculture had higher levels for employment. Our results for social activities of elderly subjects belonging to clubs for senior citizens indicate that strong correlations exist with environmental conditions, including communication facilities and local or industrial structure.

Characterizing the effect of summer temperature on heatstroke-related emergency ambulance dispatches in the Kanto area of Japan

NASA Astrophysics Data System (ADS)

Ng, Chris Fook Sheng; Ueda, Kayo; Ono, Masaji; Nitta, Hiroshi; Takami, Akinori

2014-07-01

Despite rising concern on the impact of heat on human health, the risk of high summer temperature on heatstroke-related emergency dispatches is not well understood in Japan. A time-series study was conducted to examine the association between apparent temperature and daily heatstroke-related ambulance dispatches (HSAD) within the Kanto area of Japan. A total of 12,907 HSAD occurring from 2000 to 2009 in five major cities—Saitama, Chiba, Tokyo, Kawasaki, and Yokohama—were analyzed. Generalized additive models and zero-inflated Poisson regressions were used to estimate the effects of daily maximum three-hour apparent temperature (AT) on dispatch frequency from May to September, with adjustment for seasonality, long-term trend, weekends, and public holidays. Linear and non-linear exposure effects were considered. Effects on days when AT first exceeded its summer median were also investigated. City-specific estimates were combined using random effects meta-analyses. Exposure-response relationship was found to be fairly linear. Significant risk increase began from 21 °C with a combined relative risk (RR) of 1.22 (95 % confidence interval, 1.03-1.44), increasing to 1.49 (1.42-1.57) at peak AT. When linear exposure was assumed, combined RR was 1.43 (1.37-1.50) per degree Celsius increment. Overall association was significant the first few times when median AT was initially exceeded in a particular warm season. More than two-thirds of these initial hot days were in June, implying the harmful effect of initial warming as the season changed. Risk increase that began early at the fairly mild perceived temperature implies the need for early precaution.

Characterizing the effect of summer temperature on heatstroke-related emergency ambulance dispatches in the Kanto area of Japan.

PubMed

Ng, Chris Fook Sheng; Ueda, Kayo; Ono, Masaji; Nitta, Hiroshi; Takami, Akinori

2014-07-01

Despite rising concern on the impact of heat on human health, the risk of high summer temperature on heatstroke-related emergency dispatches is not well understood in Japan. A time-series study was conducted to examine the association between apparent temperature and daily heatstroke-related ambulance dispatches (HSAD) within the Kanto area of Japan. A total of 12,907 HSAD occurring from 2000 to 2009 in five major cities-Saitama, Chiba, Tokyo, Kawasaki, and Yokohama-were analyzed. Generalized additive models and zero-inflated Poisson regressions were used to estimate the effects of daily maximum three-hour apparent temperature (AT) on dispatch frequency from May to September, with adjustment for seasonality, long-term trend, weekends, and public holidays. Linear and non-linear exposure effects were considered. Effects on days when AT first exceeded its summer median were also investigated. City-specific estimates were combined using random effects meta-analyses. Exposure-response relationship was found to be fairly linear. Significant risk increase began from 21 °C with a combined relative risk (RR) of 1.22 (95% confidence interval, 1.03-1.44), increasing to 1.49 (1.42-1.57) at peak AT. When linear exposure was assumed, combined RR was 1.43 (1.37-1.50) per degree Celsius increment. Overall association was significant the first few times when median AT was initially exceeded in a particular warm season. More than two-thirds of these initial hot days were in June, implying the harmful effect of initial warming as the season changed. Risk increase that began early at the fairly mild perceived temperature implies the need for early precaution.

Outcomes of labor epidural analgesia among women aged over 40: A single-institution retrospective study.

PubMed

Okazaki, Atsuko; Fukushima, Risa; Nagashima, Sayuri; Mazda, Yusuke; Tamura, Kazumi; Terui, Katsuo; Tanaka, Motoshi

2016-12-01

The purpose of this study was to investigate the effects of labor epidural analgesia (LEA) on maternal and neonatal outcomes among parturients aged 40 years or older. We retrospectively reviewed medical records of all laboring, singleton and cephalic deliveries at ≥36 weeks' gestation at the Saitama Medical Center from April 2003 to September 2012. Women aged ≥40 years who received LEA (≥40 with LEA group) were compared with women aged ≥40 years who delivered without LEA (≥40 without LEA group) and women <40 years who received LEA (<40 with LEA group). Extracted outcomes included mode of delivery, oxytocin augmentation, duration of labor, amount of estimated blood loss, umbilical artery pH, Apgar scores, and neonatal intensive care unit admission. This study included 4441 women. There were 74 women in the ≥40 with LEA group, 369 in the ≥40 without LEA group, and 601 in the <40 with LEA group. The maternal outcomes of emergency cesarean delivery rate (9.5%, 12.5%, 9.0%), instrumental delivery rate (33.8%, 10.3%, 28.3%), duration of labor (521 min, 321 min, 565 min), and estimated blood loss (524 g, 351 g, 412 g) were reported for the ≥40 with LEA, ≥40 without LEA, and <40 with LEA groups, respectively. Neonatal outcomes were not different between these groups. LEA use was not associated with emergency cesarean delivery in the multivariable analysis. Our study showed that parturients aged ≥40 with LEA can expect similar LEA-associated labor outcomes to younger parturients with LEA. © 2016 Japan Society of Obstetrics and Gynecology.

Alcohol and Exercise Affect Declining Kidney Function in Healthy Males Regardless of Obesity: A Prospective Cohort Study.

PubMed

Kanda, Eiichiro; Muneyuki, Toshitaka; Suwa, Kaname; Nakajima, Kei

2015-01-01

Although lifestyle is associated with metabolic syndrome and cardiovascular diseases, there has been no sufficient evidence of lifestyles on incident chronic kidney disease (CKD). The purpose of this prospective cohort study is to investigate the effects of lifestyles on kidney function in healthy people. A total of 7473 healthy people were enrolled in this Saitama Cardiometabolic Disease and Organ Impairment Study, Japan. Data on alcohol consumption, exercise frequency, and sleep duration were collected. The outcome event was incident CKD or decrease in estimated glomerular filtration rate (eGFR) by >25% in 3 years. Subjects were classified into four groups according to body mass index and gender. Mean ± standard deviation of age was 38.8±10.5 years; eGFR, 78.1±15.2 ml/min/1.73 m2. In the male groups, multivariate logistic regression models showed that the outcome events were associated with a small amount of alcohol consumed (20 to 140 g of alcohol/week) (ref. more than 140 g of alcohol/week); non-obese male, adjusted odds ratio 1.366 (95% confidence interval, 1.086, 1.718); obese male (body mass index ≥25), 1.634 (1.160, 2.302); and with frequent exercise (twice a week or more) (ref. no exercise); non-obese male, 1.417 (1.144, 1.754); obese male, 1.842 (1.317, 2.577). Sleep duration was not associated with the outcome events. These findings suggest that, regardless of obesity, a small amount of alcohol consumed and high exercise frequency were associated with the increased risk of loss of kidney function in the male groups.

List of Participants

NASA Astrophysics Data System (ADS)

2011-08-01

Abigail Alvarez OlarteCINVESTAV Alba Leticia Carrillo MonteverdeDCI-UG Alberto CarramiñanaINAOE Aldo MorselliFERMI Alejandro CastillaDCI-UG Alejandro IbarraTechnical University of Munich Alma D Rojas PachecoFCFM-BUAP Alma Xochitl Gonzalez MoralesInstituto de Ciencias Nucleares, UNAM Andrew Walcott BeckwithAmerican Institute of Beam Energy Physics Ariadna Montiel ArenasDepartamento de Física, CINVESTAV Arnulfo ZepedaCinvestav Arturo Alvarez CruzInstituto de Fisica, UNAM Axel de la MacorraUNAM, IAC Azar MustafayevUniversity of Minnesota Benjamin JaramilloDCI-UG Vincent BertinCPPM-Marseille Carlos Alberto Vaquera-AraujoDCI-UG Carlos MuñozMadrid Autonoma U. & Madrid, IFT Carmine PagliaroneINFN, FNAL Carolina Lujan PeschardDCI-UG Christiane Frigerio MartinsUniversidade Federal do ABC-São Paulo Csaba BalazsMonash University David DelepineDCI-UG David G CerdenoUniversidad Autonoma de Madrid & Instituto de Fisica Teorica Debasish MajumdarSaha Institute of Nuclear Physics, Kolkata, India Dibyendu PanigrahiKandi Raj College, Kandi, Murshidabad, INDIA-742137 Dupret Alberto Santana BejaranoUniversidad de Sonora Departamento de Investigacion en Fisica Ernest MaRiverside U.C. Esteban Alejandro Reyes Pírez MontañezInstituto de Física, UNAM Federico Ortiz TrejoINSTITUTO DE ASTRONOMÍA - UNAM Francisco José de Anda NavarroUniversidad de Guadalajara González Alvarez Francisco JavierCINVESTAV-Depto. Física Gustavo Medina TancoICN-UNAM Hernando Efrain Caicedo OrtizInstituto Politecnico Nacional - IPN J D VergadosCERN & Ioannina U. James R BoyceJefferson Lab Jason SteffenFERMILAB Javier Montaño DomínguezDCI-UG Jeevan SolankiMandsaur Institue of Technology MP India Joe SatoSaitama University Jorge Luis Navarro EstradaUNAM-ICN and Universidad del Atlantico (B/quilla-Col.) Jose A R CembranosUniversity of Minnesota José DíazIFIC Jose Didino Garcia AguilarDepto. de Fisica. Cinvestav Keith OliveUniversity of Minnesota Konstantia BalasiUniversity of Ioannina, Greece Lilian Prado

Parallelizing Compiler Framework and API for Power Reduction and Software Productivity of Real-Time Heterogeneous Multicores

NASA Astrophysics Data System (ADS)

Hayashi, Akihiro; Wada, Yasutaka; Watanabe, Takeshi; Sekiguchi, Takeshi; Mase, Masayoshi; Shirako, Jun; Kimura, Keiji; Kasahara, Hironori

Heterogeneous multicores have been attracting much attention to attain high performance keeping power consumption low in wide spread of areas. However, heterogeneous multicores force programmers very difficult programming. The long application program development period lowers product competitiveness. In order to overcome such a situation, this paper proposes a compilation framework which bridges a gap between programmers and heterogeneous multicores. In particular, this paper describes the compilation framework based on OSCAR compiler. It realizes coarse grain task parallel processing, data transfer using a DMA controller, power reduction control from user programs with DVFS and clock gating on various heterogeneous multicores from different vendors. This paper also evaluates processing performance and the power reduction by the proposed framework on a newly developed 15 core heterogeneous multicore chip named RP-X integrating 8 general purpose processor cores and 3 types of accelerator cores which was developed by Renesas Electronics, Hitachi, Tokyo Institute of Technology and Waseda University. The framework attains speedups up to 32x for an optical flow program with eight general purpose processor cores and four DRP(Dynamically Reconfigurable Processor) accelerator cores against sequential execution by a single processor core and 80% of power reduction for the real-time AAC encoding.

Characterization of a novel antibacterial glycopeptide produced by Penicillium sp. M03.

PubMed

Yang, W H; Zhang, W C; Lu, X M; Jiang, G S; Gao, P J

2009-04-01

To isolate a novel antibiotic termed AF from fermentation broth of Penicillium sp. M03 and to examine its antimicrobial activity, biological properties and structure characteristics. Sephadex LH-20 and HPLC were used to purify AF from fermentation broth of Penicillium sp. M03. The antimicrobial activity of AF was evaluated with the agar diffusion test. Amino acid and monosaccharide composition of AF was analysed by a HITACHI 835 detector and HPLC assay, respectively. Matrix-assisted laser desorption time of flight mass spectrometry, FT-IR and (1)H nuclear magnetic resonance spectra analyses were performed to examine the initial structure of AF. Eighty milligrams of AF was isolated as white powder from 1-l Penicillium sp. M03 fermentation broth. It consists of five amino acid and two monosaccharide residues and the molecular weight of it was 1017, and it was stable to beta-lactamase, heat, acid and alkali. AF showed inhibitory activity to a wide range of bacteria, particularly to multidrug-resistant Staphylococcus aureus. AF was a novel antibacterial glycopeptide with a broad inhibitory spectrum to pathogenic bacteria including multidrug-resistant agents. Furthermore, it is difficult to generate bacteria resistant to AF. Characterization of AF made it a potential antibiotic to fight against antibiotic-resistant bacterial pathogens.

Nonalcoholic fatty liver in patients with Laron syndrome and GH gene deletion - preliminary report.

PubMed

Laron, Zvi; Ginsberg, Shira; Webb, Muriel

2008-10-01

There is little information on the relationship between growth hormone/insulin-like growth factor-I (GH/IGF-I) deficiency or IGF-I treatment on nonalcoholic fatty liver disease (NAFLD) a disorder linked to obesity and insulin resistance. To find out whether the markedly obese patients with Laron syndrome (LS) and GH gene deletion have fatty livers. We studied 11 untreated adult patients with LS (5M, 6F), five girls with LS treated by IGF-I and five adult patients with GH gene deletion (3M, 3F), four previously treated by hGH in childhood. Fatty liver was quantitatively evaluated by ultrasonography using a phase array US system (HITACHI 6500, Japan). Body adiposity was determined by DEXA, and insulin resistance was estimated by HOMA-IR using the fasting serum glucose and insulin values. Six out of 11 adult patients with LS, two out of the five IGF-I treated girls with LS and three out of five adult hGH gene deletion patients were found to have NAFLD (nonalcoholic fatty liver disease). NAFLD is a frequent complication in untreated and treated congenital IGF-I deficiency. No correlation between NAFLD and age, sex, degree of obesity, blood lipids, or degree of insulin resistance was observed.

Voices from the front lines. Four leaders on the cross-border challeng they've faced.

PubMed

Minguet, Luc; Caride, Eduardo; Yamaguchi, Takeo; Tedjarati, Shane

2014-09-01

Executives on the front lines of managing across borders share their insights: Luc Minguet, of France's Michelin, talks about the importance of cultural training not just for managers taking on assignments abroad but also for local employees who work with colleagues from around the world. He describes how his own experience learning to communicate across cultures reflects the tire-maker's broader practices. Eduardo Caride, of Madrid-based Telefónica, explains how the relatively young multinational is investing in a diverse talent mix as it strives to become a truly global company. Whereas early on, leaders relied on exporting Spanish managers abroad, he notes, the street now runs both ways. Takeo Yamaguchi, of Japan's Hitachi, details his efforts to create standardized global HR systems and processes across the conglomerate's 948 separate companies. "Three years ago, we had no systematic way of tracking employees, evaluating performance, or identifying future leaders," Yamaguchi says. "Today we do." And Shane Tedjarati, from the United States' Honeywell, talks about how the industrial powerhouse is shifting its strategy toward new regions, such as China, India, vietnam, and Indonesia. "We call these markets 'high-growth regions' instead of emerging markets," says Tedjarati, "because they now account for more than half of Honeywell's total growth."

Fine structural features of nanoscale zero-valent iron characterized by spherical aberration corrected scanning transmission electron microscopy (Cs-STEM).

PubMed

Liu, Airong; Zhang, Wei-xian

2014-09-21

An angstrom-resolution physical model of nanoscale zero-valent iron (nZVI) is generated with a combination of spherical aberration corrected scanning transmission electron microscopy (Cs-STEM), selected area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDS) and electron energy-loss spectroscopy (EELS) on the Fe L-edge. Bright-field (BF), high-angle annular dark-field (HAADF) and secondary electron (SE) imaging of nZVI acquired by a Hitachi HD-2700 STEM show near atomic resolution images and detailed morphological and structural information of nZVI. The STEM-EDS technique confirms that the fresh nZVI comprises of a metallic iron core encapsulated with a thin layer of iron oxides or oxyhydroxides. SAED patterns of the Fe core suggest the polycrystalline structure in the metallic core and amorphous nature of the oxide layer. Furthermore, Fe L-edge of EELS shows varied structural features from the innermost Fe core to the outer oxide shell. A qualitative analysis of the Fe L(2,3) edge fine structures reveals that the shell of nZVI consists of a mixed Fe(II)/Fe(III) phase close to the Fe (0) interface and a predominantly Fe(III) at the outer surface of nZVI.

Creation of three-dimensional craniofacial standards from CBCT images

NASA Astrophysics Data System (ADS)

Subramanyan, Krishna; Palomo, Martin; Hans, Mark

2006-03-01

Low-dose three-dimensional Cone Beam Computed Tomography (CBCT) is becoming increasingly popular in the clinical practice of dental medicine. Two-dimensional Bolton Standards of dentofacial development are routinely used to identify deviations from normal craniofacial anatomy. With the advent of CBCT three dimensional imaging, we propose a set of methods to extend these 2D Bolton Standards to anatomically correct surface based 3D standards to allow analysis of morphometric changes seen in craniofacial complex. To create 3D surface standards, we have implemented series of steps. 1) Converting bi-plane 2D tracings into set of splines 2) Converting the 2D splines curves from bi-plane projection into 3D space curves 3) Creating labeled template of facial and skeletal shapes and 4) Creating 3D average surface Bolton standards. We have used datasets from patients scanned with Hitachi MercuRay CBCT scanner providing high resolution and isotropic CT volume images, digitized Bolton Standards from age 3 to 18 years of lateral and frontal male, female and average tracings and converted them into facial and skeletal 3D space curves. This new 3D standard will help in assessing shape variations due to aging in young population and provide reference to correct facial anomalies in dental medicine.

Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. H. Jackson; S. P. Teysseyre

2012-10-01

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials ofmore » interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.« less

Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. H. Jackson; S. P. Teysseyre

2012-02-01

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials ofmore » interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.« less

Application of the DG-1199 methodology to the ESBWR and ABWR.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinich, Donald A.; Gauntt, Randall O.; Walton, Fotini

2010-09-01

Appendix A-5 of Draft Regulatory Guide DG-1199 'Alternative Radiological Source Term for Evaluating Design Basis Accidents at Nuclear Power Reactors' provides guidance - applicable to RADTRAD MSIV leakage models - for scaling containment aerosol concentration to the expected steam dome concentration in order to preserve the simplified use of the Accident Source Term (AST) in assessing containment performance under assumed design basis accident (DBA) conditions. In this study Economic and Safe Boiling Water Reactor (ESBWR) and Advanced Boiling Water Reactor (ABWR) RADTRAD models are developed using the DG-1199, Appendix A-5 guidance. The models were run using RADTRAD v3.03. Low Populationmore » Zone (LPZ), control room (CR), and worst-case 2-hr Exclusion Area Boundary (EAB) doses were calculated and compared to the relevant accident dose criteria in 10 CFR 50.67. For the ESBWR, the dose results were all lower than the MSIV leakage doses calculated by General Electric/Hitachi (GEH) in their licensing technical report. There are no comparable ABWR MSIV leakage doses, however, it should be noted that the ABWR doses are lower than the ESBWR doses. In addition, sensitivity cases were evaluated to ascertain the influence/importance of key input parameters/features of the models.« less

SEM-based overlay measurement between via patterns and buried M1 patterns using high-voltage SEM

NASA Astrophysics Data System (ADS)

Hasumi, Kazuhisa; Inoue, Osamu; Okagawa, Yutaka; Shao, Chuanyu; Leray, Philippe; Halder, Sandip; Lorusso, Gian; Jehoul, Christiane

2017-03-01

The miniaturization of semiconductors continues, importance of overlay measurement is increasing. We measured overlay with analysis SEM called Miracle Eye which can output ultrahigh acceleration voltage in 1998. Meanwhile, since 2006, we have been working on SEM based overlay measurement and developed overlay measurement function of the same layer using CD-SEM. Then, we evaluated overlay of the same layer pattern after etching. This time, in order to measure overlay after lithography, we evaluated the see-through overlay using high voltage SEM CV5000 released in October 2016. In collaboration between imec and Hitachi High-Technologies, we evaluated repeatability, TIS of SEM-OVL as well as correlation between SEM-OVL and Opt-OVL in the M1@ADI and V0@ADI process. Repeatability and TIS results are reasonable and SEM-OVL has good correlation with Opt-OVL. By overlay measurement using CV 5000, we got the following conclusions. (1)SEM_OVL results of both M1 and V0 at ADI show good correlation to OPT_OVL. (2)High voltage SEM can prove the measurement capability of a small pattern(Less than 1 2um) like device that can be placed in-die area. (3)"In-die SEM based overlay" shows possibility for high order control of scanner

Transmission electron microscopy of polyhydroxybutyrate-co-valerate (PHBV)/nanocrystalline cellulose (NCC) bio-nanocomposite prepared using cryo-ultramicrotomy

NASA Astrophysics Data System (ADS)

Ismarul, N. I.; Engku, A. H. E. U.; Siti, N. K.; Tay, K. Y.

2017-12-01

Environmental issues on disposal and end-of-life for product made from synthetic petroleum-derived polymers have gained increasing attention from materials scientist to search for new materials with similar physical and mechanical properties but environmental friendly in a way that they are renewable and biodegradable as well. This work is to study the effect of nanocrystalline cellulose in improving the thermal stability of polyhydroxybutyrate-co-valerate biopolymer for high temperature processing of packaging material. 10 % w/w PHBV-NCC bio-nanocomposite feedstock pellet prepared using RONDOL minilab compounder was used as the sample for the preparation of Transmission Electron Microscopy (TEM) sample. RMC Cryo-Ultramicrotomy equipment was used to prepare the ultra-thin slice of the bio-nanocomposite pellet under liquid nitrogen at - 60 °C. Diamond knife was used to slice off about 80-100 nm ultra-thin bio-nanocomposite films and was transferred into the lacey carbon film coated grid using cooled sugar solution. A few drops of phosphotungstic acid was used as negative stain to improve the contrast during the TEM analysis. HITACHI TEM systems was used to obtain the TEM micrograph of PHBV-NCC bio-nanocomposite using 80kV accelerating voltage. A well dispersed NCC in PHBV matrix, ranging from 5 to 25 nm in width was observed.

The Effects of Exercise Therapy on CVD Risk Factors in Women

PubMed Central

Hur, Sun; Kim, Seon-Rye

2014-01-01

[Purpose] The purpose of this study was to search for the association of Type D personality and CVD risk factors through comparison of the association of exercise participation with CVD risk factors in women. [Subjects] The research subjects were randomly assigned to four groups: Type D+Exercise (n=12), Type D+non-exercise (n=12), non-Type D+Exercise (n=12), and non-Type D+non-exercise (n=10). The study consisted of 46 participants. [Methods] An aerobic exercise program and meditation were conducted in parallel for 10 months. Stretching was performed for 10 min as a warm-up, and then walking and running on a treadmill at 60 to 70% of HRmax were performed for 40 min three times a week. Blood samples were processed according to standard laboratory procedures. The concentrations of TG and HDL cholesterol were determined enzymatically using a clinical chemistry analyzer (Hitachi High-Technologies Corporation, Tokyo, Japan). [Results] The weight, percentage of body fat, waist circumference, triglyceride concentration, HDL cholesterol concentration, systolic blood pressure, and diastolic blood pressure showed a significant difference between measurement times in the exercise groups. [Conclusion] In conclusion, there were significant differences between groups in terms of cardiovascular disease risk factors. PMID:25276017

A new automated multiple allergen simultaneous test-chemiluminescent assay (MAST-CLA) using an AP720S analyzer.

PubMed

Lee, Sungsil; Lim, Hwan Sub; Park, Jungyong; Kim, Hyon Suk

2009-04-01

In the diagnosis of atopic diseases, allergen detection is a crucial step. Multiple allergen simultaneous test-chemiluminescent assay (MAST-CLA) is a simple and noninvasive method for in vitro screening of allergen-specific IgE antibodies. The Korean Inhalant Panel test on 20 patients and Food Panel test on 19 patients were performed using the conventional manual MAST-CLA kit and the new automated MAST-CLA method (automated AP720S system for the Optigen Assay; Hitachi Chemical Diagnostics, Inc., USA) simultaneously. The results were evaluated for positive reactivity and concordance. The results of inhalant panel gave a relatively higher class level result than the food panel. The 8 patients out of 20 (40%) of the inhalation panel, and 9 patients out of 18 (47.4%) of the food panel showed 100% concordance between the 2 systems. Eighteen patients (90%) of the Inhalation Panel and sixteen patients (84.2%) of the Food Panel showed more than 91% concordance. These results suggest that the MAST-CLA assay using the new, automated AP720S analyzer performs well, showing a high concordance rate with conventional MAST-CLA. Compared to manual MAST-CLA, the automated AP720S system has a shorter assay time and uses a smaller serum volume (500 microl) along with other conveniences.

Prevention of overlapping prescriptions of psychotropic drugs by community pharmacists.

PubMed

Shimane, Takuya; Matsumoto, Toshihiko; Wada, Kiyoshi

2012-10-01

The nonmedical use or abuse of prescription drugs, including psychotropic medicines, is a growing health problem in Japan. Patient access to psychotropic drugs, specifically from the oversupply of medications due to overlapping prescriptions, may increase the risk of drug abuse and dependence. However, very little is known about such overlapping prescriptions. Today, the dispensing of prescriptions is generally moving from inside to outside of hospitals, with psychotropic drugs mainly dispensed at community pharmacies. In this study, we used health insurance claims (i.e., receipts) for dispensing as the main source of information in an investigation of overlapping prescriptions of psychotropic drugs. A total of 119 patients were found to have received overlapping prescriptions, as identified by community pharmacists who were members of the Saitama Pharmaceutical Association, using patient medication records, followed by medication counseling and prescription notes for the patient. According to our findings, the most frequently overlapping medication was etizolam. Etizolam can be prescribed for more than 30 days since it is not regulated under Japanese law as a "psychotropic drug." Generally, when a drug can be prescribed for a greater number of days, it increases the likelihood of an overlapping prescription during the same period. As a result, the long-term prescription of etizolam increases the risk of overlapping prescriptions. We also found that the patients who received overlapping prescriptions of etizolam were mostly elderly and the most common pattern was prescription from both internal medicine and orthopedics physicians. Etizolam has wide range of indications that are covered by health insurance. Our results suggest that patients who received overlapping prescriptions of etizolam may receive prescriptions from different prescribers for different purposes. Therefore, it may be appropriate to regulate etizolam as a "psychotropic drug" under Japanese law

Temperature change affected groundwater quality in a confined marine aquifer during long-term heating and cooling.

PubMed

Saito, Takeshi; Hamamoto, Shoichiro; Ueki, Takashi; Ohkubo, Satoshi; Moldrup, Per; Kawamoto, Ken; Komatsu, Toshiko

2016-05-01

Global warming and urbanization together with development of subsurface infrastructures (e.g. subways, shopping complexes, sewage systems, and Ground Source Heat Pump (GSHP) systems) will likely cause a rapid increase in the temperature of relatively shallow groundwater reservoirs (subsurface thermal pollution). However, potential effects of a subsurface temperature change on groundwater quality due to changed physical, chemical, and microbial processes have received little attention. We therefore investigated changes in 34 groundwater quality parameters during a 13-month enhanced-heating period, followed by 14 months of natural or enhanced cooling in a confined marine aquifer at around 17 m depth on the Saitama University campus, Japan. A full-scale GSHP test facility consisting of a 50 m deep U-tube for circulating the heat-carrying fluid and four monitoring wells at 1, 2, 5, and 10 m from the U-tube were installed, and groundwater quality was monitored every 1-2 weeks. Rapid changes in the groundwater level in the area, especially during the summer, prevented accurate analyses of temperature effects using a single-well time series. Instead, Dual-Well Analysis (DWA) was applied, comparing variations in subsurface temperature and groundwater chemical concentrations between the thermally-disturbed well and a non-affected reference well. Using the 1 m distant well (temperature increase up to 7 °C) and the 10 m distant well (non-temperature-affected), the DWA showed an approximately linear relationships for eight components (B, Si, Li, dissolved organic carbon (DOC), Mg(2+), NH4(+), Na(+), and K(+)) during the combined 27 months of heating and cooling, suggesting changes in concentration between 4% and 31% for a temperature change of 7 °C. Copyright © 2016 Elsevier Ltd. All rights reserved.

High Prevalence of Post-Traumatic Stress Symptoms in Relation to Social Factors in Affected Population One Year after the Fukushima Nuclear Disaster

PubMed Central

Tsujiuchi, Takuya; Yamaguchi, Maya; Masuda, Kazutaka; Tsuchida, Marisa; Inomata, Tadashi; Kumano, Hiroaki; Kikuchi, Yasushi; Augusterfer, Eugene F.; Mollica, Richard F.

2016-01-01

Objective This study investigated post-traumatic stress symptoms in relation to the population affected by the Fukushima Nuclear Disaster, one year after the disaster. Additionally, we investigated social factors, such as forced displacement, which we hypothesize contributed to the high prevalence of post-traumatic stress. Finally, we report of written narratives that were collected from the impacted population. Design and Settings Using the Impact of Event Scale-Revised (IES-R), questionnaires were sent to 2,011 households of those displaced from Fukushima prefecture living temporarily in Saitama prefecture. Of the 490 replies; 350 met the criteria for inclusion in the study. Multiple logistic regression analysis was performed to examine several characteristics and variables of social factors as predictors of probable post-traumatic stress disorder, PTSD. Results The mean score of IES-R was 36.15±21.55, with 59.4% having scores of 30 or higher, thus indicating a probable PTSD. No significant differences in percentages of high-risk subjects were found among sex, age, evacuation area, housing damages, tsunami affected, family split-up, and acquaintance support. By the result of multiple logistic regression analysis, the significant predictors of probable PTSD were chronic physical diseases (OR = 1.97), chronic mental diseases (OR = 6.25), worries about livelihood (OR = 2.27), lost jobs (OR = 1.71), lost social ties (OR = 2.27), and concerns about compensation (OR = 3.74). Conclusion Although there are limitations in assuming a diagnosis of PTSD based on self-report IES-R, our findings indicate that there was a high-risk of PTSD strongly related to the nuclear disaster and its consequent evacuation and displacement. Therefore, recovery efforts must focus not only on medical and psychological treatment alone, but also on social and economic issues related to the displacement, as well. PMID:27002324

High Prevalence of Post-Traumatic Stress Symptoms in Relation to Social Factors in Affected Population One Year after the Fukushima Nuclear Disaster.

PubMed

Tsujiuchi, Takuya; Yamaguchi, Maya; Masuda, Kazutaka; Tsuchida, Marisa; Inomata, Tadashi; Kumano, Hiroaki; Kikuchi, Yasushi; Augusterfer, Eugene F; Mollica, Richard F

2016-01-01

This study investigated post-traumatic stress symptoms in relation to the population affected by the Fukushima Nuclear Disaster, one year after the disaster. Additionally, we investigated social factors, such as forced displacement, which we hypothesize contributed to the high prevalence of post-traumatic stress. Finally, we report of written narratives that were collected from the impacted population. Using the Impact of Event Scale-Revised (IES-R), questionnaires were sent to 2,011 households of those displaced from Fukushima prefecture living temporarily in Saitama prefecture. Of the 490 replies; 350 met the criteria for inclusion in the study. Multiple logistic regression analysis was performed to examine several characteristics and variables of social factors as predictors of probable post-traumatic stress disorder, PTSD. The mean score of IES-R was 36.15±21.55, with 59.4% having scores of 30 or higher, thus indicating a probable PTSD. No significant differences in percentages of high-risk subjects were found among sex, age, evacuation area, housing damages, tsunami affected, family split-up, and acquaintance support. By the result of multiple logistic regression analysis, the significant predictors of probable PTSD were chronic physical diseases (OR = 1.97), chronic mental diseases (OR = 6.25), worries about livelihood (OR = 2.27), lost jobs (OR = 1.71), lost social ties (OR = 2.27), and concerns about compensation (OR = 3.74). Although there are limitations in assuming a diagnosis of PTSD based on self-report IES-R, our findings indicate that there was a high-risk of PTSD strongly related to the nuclear disaster and its consequent evacuation and displacement. Therefore, recovery efforts must focus not only on medical and psychological treatment alone, but also on social and economic issues related to the displacement, as well.

[The relationship of quality of life (QOL) with physical fitness, competence and stress response in elderly in Japan].

PubMed

Uemura, Shinichi; Machida, Kazuhiki

2003-09-01

In order to evaluate the relationship of quality of life (QOL) with physical fitness, competence and stress response in the elderly population in Japan, a cross sectional field survey of elderly subjects was conducted. This survey was taken in Naguri village, Saitama. The data collected included physical fitness, competence, stress response and QOL in addition to demographic variables. As for physical fitness indexes, grip strength (GS), single leg balance with eyes closed (SLB), bar grip ping reaction time (RT), trunk flexion (RF), ten-meter walking time (WT) and vital capacity (VC) were measured. The SF-36 was used for QOL assessment. A total of 120 elderly subjected participated to the survey. There were 42 males (73.5 +/- 5.74 years) and 78 females (74.2 +/- 6.17 years). The associations between physical health parameters in SF-36 and WT were highly significant: physical functioning (beta = -2.96, p < 0.001), role physical (beta = -3.64, p < 0.001), bodily pain (beta = -3.27, p < 0.001) and general health (beta = -3.14, p = 0.001). Psychological stress response had a negative correlation with social functioning (beta = -0.74, p = 0.024), role-emotional (beta = -2.34, p < 0.007) and mental health (beta = -0.97, p = 0.024) as determined by multiple regression analysis. The goodness-of-fit indexes of the structural equation model describing the relationships among physical fitness, competence, stress response and QOL indicated excellent fit to the data with GFI = 0.95 and AGFI = 0.88. Stress response showed relatively stronger influence on QOL than physical fitness or competence. Although there were slight differences in degree of influence, physical fitness, stress response and competence were found to be clearly related to QOL in elderly subjects. To keep good QOL status, it is important to maintain good physical fitness and level of competence and to reduce stress response.

[Volatile organic compounds of the tap water in the Watarase, Tone and Edo River system].

PubMed

Ohmichi, Kimihide; Ohmichi, Masayoshi; Machida, Kazuhiko

2004-01-01

The chlorination of river water in purification plants is known to produce carcinogens such as trihalomethanes (THMs). We studied the river system of the Watarase, Tone, and Edo Rivers in regard to the formation of THMs. This river system starts from the base of the Ashio copper mine and ends at Tokyo Bay. Along the rivers, there are 14 local municipalities in Gunma, Saitama, Ibaragi and Chiba Prefectures, as well as Tokyo. This area is the center of the Kanto plain and includes the main sources of water pollution from human activities. We also analyzed various chemicals in river water and tap water to clarify the status of the water environment, and we outline the problems of the water environment in the research area (Fig. 1). Water samples were taken from 18 river sites and 42 water faucets at public facilities in 14 local municipalities. We analyzed samples for volatile organic compounds such as THMs, by gas chromatography mass spectrometry (GC-MS), and evaluations of chemical oxygen demand (COD) were made with reference to Japanese drinking water quality standards. Concentrations of THMs in the downstream tap water samples were higher than those in the samples from the upperstream. This tendency was similar to the COD of the river water samples, but no correlation between the concentration of THMs in tap water and the COD in tap water sources was found. In tap water of local government C, trichloroethylene was detected. The current findings suggest that the present water filtration plant procedures are not sufficient to remove some hazardous chemicals from the source water. Moreover, it was confirmed that the water filtration produced THMs. Also, trichloroethylene was detected from the water environment in the research area, suggesting that pollution of the water environment continues.

Response of spinach and komatsuna to biogas effluent made from source-separated kitchen garbage.

PubMed

Furukawa, Yuichiro; Hasegawa, Hiroshi

2006-01-01

Recycling of kitchen garbage is an urgent task for reducing public spending and environmental burdens by incineration and/or landfill. There is an interesting regional effort in Ogawa, Saitama prefecture, Japan, in which source-separated kitchen garbage is anaerobically fermented with a biogas plant and the resultant effluent is used as a quick-release organic fertilizer by surrounding farmers. However, scientific assessments of fertilizer values and risks in the use of the effluent were lacking. Thus, a field experiment was conducted from 2003 to 2004 in Tohoku National Agricultural Research Center to grow spinach (Spinacia oleracea L.) and komatsuna (Brassica rapa var. perviridis L. H. Bailey) for evaluating the fertilizer value of the kitchen garbage effluent (KGE), nitrate, coliform group (CG), Escherichia coli, fecal streptococci (FS), and Vibrio parahaemolyticus concentrations of KGE and in the soil and the plant leaves. A cattle manure effluent (CME) and chemical fertilizers (NPK) were used as controls. Total nitrogen (N) and ammonium N concentrations of the KGE were 1.47 and 1.46 g kg(-1), respectively. The bacteria tested were detected in both biogas effluents in the order of 2 to 3 log CFU g(-1), but there was little evidence that the biogas effluents increased these bacteria in the soil and the plant leaves. At the rate of 22 g N m(-2), yield, total N uptake, apparent N recovery rate, and leaf nitrate ion concentration at harvest of spinach and komatsuna in the KGE plot were mostly comparable to those in the NPK and CME plots. We conclude that the KGE is a quick-release N fertilizer comparable to chemical fertilizers and does not cause contamination of CG, E. coli, FS, or V. parahaemolyticus in the soil and spinach and komatsuna leaves.

Viral diarrhea in Japanese children: results from a one-year epidemiologic study.

PubMed

Phan, Tung Gia; Nguyen, Tuan Anh; Kuroiwa, Toshimasa; Kaneshi, Kunio; Ueda, Yuichi; Nakaya, Shigekazu; Nishimura, Shuichi; Nishimura, Tadashi; Yamamoto, Atsuko; Okitsu, Shoko; Ushijima, Hiroshi

2005-01-01

A total of 557 fecal specimens from infants and children with acute gastroenteritis in five places (Maizuru, Tokyo, Sapporo, Saga and Osaka) in Japan from July 2002 to June 2003 were tested for the presence of diarrheal viruses by RT-PCR, PRHA, RNA-PAGE and latex agglutination methods. Of these, 56.4% (314) were found positive for diarrheal viruses. Among them, group A rotavirus was the most prevalent (43.6%, 137 of 314) followed by norovirus (29.9%, 94 of 314), adenovirus (7.6%, 24 of 314), group C rotavirus (6.4%, 20 of 314), sapovirus (5.1%, 16 of 314) and astrovirus (1.6%, 5 of 314), respectively. A high rate (7.4%, 19 of 314) of viral mixed infections, including one triple infection (adenovirus, norovirus and astrovirus) was demonstrated. Norovirus infection that usually has a peak during November and January in Japan was detected year-round and highest in September in our study. Norovirus was subjected to molecular genetic analysis by sequencing. The results clearly indicated that norovirus group II was a dominant genogroup (94.3%, 100 of 106). It is noteworthy that noroviruses detected in this study were classified into 8 genotypes (GI/1, GI/4, GII/2, GII/3, GII/4, GII/5, GII/6 and GII/12). Of these, NVGII/4 was the predominant genotype, followed by NVGII/6, and these presented 75.6% (80 of 106) and 11.3% (12 of 106), respectively. Another interesting feature in our study was the sudden appearance and disappearance of SaitamaU16-like strains belonging to NVGII/6 in the short period (January 2003 to June 2003). Our findings confirmed the presence of many diarrheal viruses co-circulating among Japanese infants and children and showed the great genetic diversity among norovirus.

Technical note: Evaluation of the diagnostic accuracy of 2 point-of-care β-hydroxybutyrate devices in stored bovine plasma at room temperature and at 37°C.

PubMed

Leal Yepes, F A; Nydam, D V; Heuwieser, W; Mann, S

2018-04-25

The use of point-of-care (POC) devices to measure blood metabolites, such as β-hydroxybutyrate (BHB), on farm have become an important diagnostic and screening tool in the modern dairy industry. The POC devices allow for immediate decision making and are often more economical than the use of laboratory-based methods; however, precision and accuracy may be lower when measurements are performed in an uncontrolled environment. Ideally, the advantages of the POC devices and the standardized laboratory environment could be combined when measuring samples that do not require an immediate result-for example, in research applications or when immediate intervention is not the goal. The objective of this study was to compare the capability of 2 POC devices (TaiDoc, Pharmadoc, Lübeck, Germany; Precision Xtra, Abbott Diabetes Care, Abingdon, UK) to measure BHB concentrations either at room temperature (RT; 20-22°C) or at 37°C compared with the gold standard test in stored plasma samples. Whole blood from multiparous Holstein dairy cows (n = 113) was sampled from the coccygeal vessels between 28 d before expected calving and 42 DIM. Whole-blood BHB concentrations were determined cow-side using the TaiDoc POC device. Plasma was separated within 1 h of collection and stored until analysis. A subset of stored plasma samples (n = 100) consisting of 1 sample per animal was chosen retrospectively based on the BHB concentrations in whole blood within the range of 0.2 to 4.0 mmol/L. The samples were analyzed for BHB plasma concentration using an automated chemistry analyzer (Hitachi 917, Hitachi, Tokyo, Japan), which was considered the gold standard. On the same day, the samples were also measured with the 2 POC devices, with samples either at RT or heated up to 37°C. Our study showed high Spearman correlation coefficients (>0.99) using either device and with samples at both temperatures compared with the gold standard. Passing-Bablok regression revealed a very strong correlation

JALT98 Proceedings. The Proceedings of the JALT Annual International Conference on Language Teaching/Learning & Educational Materials Expo. Focus on the Classroom: Interpretations (24th, Omiya, Saitama, Japan, November 20-23, 1998).

ERIC Educational Resources Information Center

Barfield, Andrew, Ed.; Betts, Robert, Ed.; Cunningham, Joyce, Ed.; Dunn, Neil, Ed.; Katsura, Haruko, Ed.; Kobayashi, Kunihiko, Ed.; Padden, Nina, Ed.; Parry, Neil, Ed.; Watanabe, Mayumi, Ed.

This volume includes papers presented at the 1998 Japan Association for Language Teaching Conference. Section 1, "Voices of Experience," includes: "Towards More Use of English in Class by JTEs" (Midori Iwano); "Paperless Portfolios" (Tim Stewart); "Textbook Creation in Reverse Order for Chinese" (Chou Jine…

Hydroxyapatite Coating on TiO₂ Nanotube by Sol-Gel Method for Implant Applications.

PubMed

Lim, Hyun-Pil; Park, Sang-Won; Yun, Kwi-Dug; Park, Chan; Ji, Min-Kyung; Oh, Gye-Jeong; Lee, Jong-Tak; Lee, Kwangmin

2018-02-01

The aim of this study was to determine the effect of hydroxyapatite (HA) coating on titanium dioxide (TiO2) nanotube by sol-gel process on viability of osteoblast like cell (MC3T3-E1) and bone formation in rat tibia. Specimens were divided into three groups including commercially pure titanium (control group), TiO2 nanotubes (group N), and HA coated TiO2 nanotubes (group HN). Surface characteristics were determined using field emission scanning electron microscope (FE-SEM; S-4700, Hitachi, Japan) and contact angles were measured. Cell viability was investigated in vitro after 1 day, 3 days, and 7 days of incubation. Implants (2.0 mm in diameter and 5.0 mm in length) were inserted into the tibia of rats. After 4 weeks, histomorphometric analysis was performed. Both N and HN groups showed enhanced hydrophilicity compared to control group. After 7 days of implantation, group HN showed higher cell viability with marginal significance (0.05 < P < 0.1). Bone to implant contact (BIC) ratio in the control group, group N, and group HN were 32.5%, 33.1%, and 43.8%, respectively. Results of this study showed that HA coated TiO2 nanotube using sol-gel process could be used to enhance hydrophilicity and improve osseointegration of dental implant surface.

[Comparison of two methods for rapid determination of C-reactive protein with the Tina-quant].

PubMed

Oremek, G M; Luksaite, R; Bretschneider, I

2008-03-01

C-reactive protein (CRP) as an acute phase protein is an important diagnostic marker for the presence and course of human processes. Out of the acute phase proteins it is one of those the concentrations increase most rapidly with its sensitivity being superior to other markers of inflammation, such as leukocytosis, erythrocytic sedimentation rate, and fever. This study compared two-point-of-care assays with the standard laboratory method Tina-quant CRP processed on a Hitachi 917: the immunofiltration assay NycoCard CRP Whole Blood and the turbidimetric immunoassay Micros CRP. Both methods are carried in the presence of a patient, by using capillary or venous blood. Seventy-eight blood samples were analyzed first in the standard laboratory routine and then by both rapid test assays. The precision of both assays was determined from the confidence interval. The results were statistically analyzed by arithmetic standard deviation mean method, variation coefficient, Spearman correlation index, Wilcoxon and Bland-Altman tests, and Passing-Bablock regression. NycoCard CRP Whole Blood showed a correlation coefficient of R = 0.9838; the precision had a coefficient of variation of CV = 1.8759% while As compared with Tina-quant CRP had R = 0.9934 and CV = 0.9160%. Both assays indicated the same results as Tina-quant CRP. Both Tina-quant CRP and NycoCard CRP Whole Blood give the best fit for the rapid determination of CRP.

Prefrontal cerebral blood volume patterns while playing video games--a near-infrared spectroscopy study.

PubMed

Nagamitsu, Shinichiro; Nagano, Miki; Yamashita, Yushiro; Takashima, Sachio; Matsuishi, Toyojiro

2006-06-01

Video game playing is an attractive form of entertainment among school-age children. Although this activity reportedly has many adverse effects on child development, these effects remain controversial. To investigate the effect of video game playing on regional cerebral blood volume, we measured cerebral hemoglobin concentrations using near-infrared spectroscopy in 12 normal volunteers consisting of six children and six adults. A Hitachi Optical Topography system was used to measure hemoglobin changes. For all subjects, the video game Donkey Kong was played on a Game Boy device. After spectroscopic probes were positioned on the scalp near the target brain regions, the participants were asked to play the game for nine periods of 15s each, with 15-s rest intervals between these task periods. Significant increases in bilateral prefrontal total-hemoglobin concentrations were observed in four of the adults during video game playing. On the other hand, significant decreases in bilateral prefrontal total-hemoglobin concentrations were seen in two of the children. A significant positive correlation between mean oxy-hemoglobin changes in the prefrontal region and those in the bilateral motor cortex area was seen in adults. Playing video games gave rise to dynamic changes in cerebral blood volume in both age groups, while the difference in the prefrontal oxygenation patterns suggested an age-dependent utilization of different neural circuits during video game tasks.

Evaluation of the Microsemi CRP, an automated hematology analyzer for rapid 3-part WBC differential and CRP using whole blood.

PubMed

Nomura, N; Saito, K; Ikeda, M; Yuasa, S; Pastore, M; Chabert, C; Kono, E; Sakai, A; Tanaka, H; Ikemoto, T; Takubo, T

2015-08-01

We evaluated the basic performance of Microsemi CRP, an unique automated hematology analyzer which can simultaneously measure CBC including 3-part WBC differential (3-Diff) and CRP using whole blood treated with EDTA-2K anticoagulant. We found that it produced generally the acceptable results for all parameters performed (repeatability, reproducibility, linearity, interference effect, carry over, and correlation) using control materials, fresh human whole bloods, and serum samples. CBC data examined using Microsemi CRP showed the good correlation with the previous model, Micros CRP200 (r ≧ 0.9), and also those obtained using the routine analyzer, ADVIA 2120i (r ≧ 0.989). Concerning the 3-Diff, both GRA (%) and LYM (%) showed the excellent correlation coefficient between Microsemi CRP and Micros CRP200 (r ≧ 0.992) as well as ADVIA 2120i (r ≧ 0.957). MON (%) showed good correlation between Microsemi CRP and Micros CRP200 (r = 0.959), but lower correlation between Microsemi CRP and ADVIA 2120 i (r = 0.471). CRP data showed the good correlation with HITACHI7600 (r ≧ 0.997) and Micros CRP200 (r ≧ 0.997). From these findings, we concluded that Microsemi CRP seemed the convenient laboratory analyzer in the setting of point of care testing (POCT) especially at NICU or primary care unit. © 2014 John Wiley & Sons Ltd.

[Evaluation of Optium Xceed (Abbott) and One Touch Ultra (Lifescan) glucose meters].

PubMed

Coyne, S; Lacour, B; Hennequin-Le Meur, C

2008-01-01

In order to build a continuous quality improvement approach for control of glucose meters in clinical divisions at Necker-Enfants Malades hospital, the analytical performances (precision and accuracy) of 2 glucose meters have been evaluated in our laboratory according to SFBC recommendations. Fifty-six heparinized whole blood specimens from patients and thirty-nine from healthy volunteers were analyzed on each of the two meters and compared to plasma glucose measurement on the Roche Hitachi 917 system. The correlation coefficient was 0.938 for Optium Xceed and 0.911 for One Touch Ultra. However, 14.7% and 18.9% of the results (n = 95) for respectively Optium Xceed and One Touch Ultra were discordant, i.e. higher than a 20% difference compared to reference blood glucose concentrations. Inaccuracy was more important for low glucose concentrations (< 5 mmol/L; 12/14 discrepant samples for Optium Xceed and 16/19 for One Touch Ultra). This data suggests a lack of accuracy, particularly for low glucose concentrations. Capillary blood glucose concentrations must therefore be interpreted with caution concerning the diagnosis of hypoglycemia and treatment of unstable patients. Moreover, quality control of glucose meters (blood glucose determinations concurrently at bedside and in the laboratory) is difficult to perform. It also raises questions about the responsibility of "point-of-care testing", an area still subject to discussion.

EELS Valence Mapping in Electron Beam Sensitive FeFx/C Nanocomposites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cosandey, F.; Al-Sharab, J.F.; Amatucci, Glenn G.

A new type of positive electrodes for Li-Ion batteries has been synthesized based on FeF{sub 2}/C and FeF3/C nanocomposites with particle size in the 8-12 nm range [1]. The measured high capacities rely on a complete reduction of Fe to its metallic state according to the following reaction: xLi{sup +}+xe{sup -} +Fe{sup x+}Fx = xLiF + Fe{sup 0}, where x=3 and x=2 for FeF3/C and FeF2/C respectively. This electrochemical reaction involves a change in valence state of Fe from 3+ or 2+ to 0 that can be determined uniquely by EELS from the peak energy of the L{sub 3} linemore » and from the L{sub 3}/L{sub 2} line intensity ratio. In this paper, we report EELS mapping results on the electrochemical conversion processes and in particular the mapping of the Fe valence state before and after discharge. This work was performed with a Hitachi HF2000 equipped with a Gatan PEELS and with a FEI CM200 FEG TEM equipped with a Gatan GIF. Both instruments were operated in STEM mode at 200kV with an EELS collection half angle of {beta}=5 mrad and spectrum imaging software.« less

Shear wave elastography with a new reliability indicator.

PubMed

Dietrich, Christoph F; Dong, Yi

2016-09-01

Non-invasive methods for liver stiffness assessment have been introduced over recent years. Of these, two main methods for estimating liver fibrosis using ultrasound elastography have become established in clinical practice: shear wave elastography and quasi-static or strain elastography. Shear waves are waves with a motion perpendicular (lateral) to the direction of the generating force. Shear waves travel relatively slowly (between 1 and 10 m/s). The stiffness of the liver tissue can be assessed based on shear wave velocity (the stiffness increases with the speed). The European Federation of Societies for Ultrasound in Medicine and Biology has published Guidelines and Recommendations that describe these technologies and provide recommendations for their clinical use. Most of the data available to date has been published using the Fibroscan (Echosens, France), point shear wave speed measurement using an acoustic radiation force impulse (Siemens, Germany) and 2D shear wave elastography using the Aixplorer (SuperSonic Imagine, France). More recently, also other manufacturers have introduced shear wave elastography technology into the market. A comparison of data obtained using different techniques for shear wave propagation and velocity measurement is of key interest for future studies, recommendations and guidelines. Here, we present a recently introduced shear wave elastography technology from Hitachi and discuss its reproducibility and comparability to the already established technologies.

Shear wave elastography with a new reliability indicator

PubMed Central

Dong, Yi

2016-01-01

Non-invasive methods for liver stiffness assessment have been introduced over recent years. Of these, two main methods for estimating liver fibrosis using ultrasound elastography have become established in clinical practice: shear wave elastography and quasi-static or strain elastography. Shear waves are waves with a motion perpendicular (lateral) to the direction of the generating force. Shear waves travel relatively slowly (between 1 and 10 m/s). The stiffness of the liver tissue can be assessed based on shear wave velocity (the stiffness increases with the speed). The European Federation of Societies for Ultrasound in Medicine and Biology has published Guidelines and Recommendations that describe these technologies and provide recommendations for their clinical use. Most of the data available to date has been published using the Fibroscan (Echosens, France), point shear wave speed measurement using an acoustic radiation force impulse (Siemens, Germany) and 2D shear wave elastography using the Aixplorer (SuperSonic Imagine, France). More recently, also other manufacturers have introduced shear wave elastography technology into the market. A comparison of data obtained using different techniques for shear wave propagation and velocity measurement is of key interest for future studies, recommendations and guidelines. Here, we present a recently introduced shear wave elastography technology from Hitachi and discuss its reproducibility and comparability to the already established technologies. PMID:27679731

Hot Chips and Hot Interconnects for High End Computing Systems

NASA Technical Reports Server (NTRS)

Saini, Subhash

2005-01-01

I will discuss several processors: 1. The Cray proprietary processor used in the Cray X1; 2. The IBM Power 3 and Power 4 used in an IBM SP 3 and IBM SP 4 systems; 3. The Intel Itanium and Xeon, used in the SGI Altix systems and clusters respectively; 4. IBM System-on-a-Chip used in IBM BlueGene/L; 5. HP Alpha EV68 processor used in DOE ASCI Q cluster; 6. SPARC64 V processor, which is used in the Fujitsu PRIMEPOWER HPC2500; 7. An NEC proprietary processor, which is used in NEC SX-6/7; 8. Power 4+ processor, which is used in Hitachi SR11000; 9. NEC proprietary processor, which is used in Earth Simulator. The IBM POWER5 and Red Storm Computing Systems will also be discussed. The architectures of these processors will first be presented, followed by interconnection networks and a description of high-end computer systems based on these processors and networks. The performance of various hardware/programming model combinations will then be compared, based on latest NAS Parallel Benchmark results (MPI, OpenMP/HPF and hybrid (MPI + OpenMP). The tutorial will conclude with a discussion of general trends in the field of high performance computing, (quantum computing, DNA computing, cellular engineering, and neural networks).

Comparison of Endoanal Ultrasound with Clinical Diagnosis in Anal Fistula Assessment.

PubMed

Sirikurnpiboon, Siripong; Phadhana-anake, Oradee; Awapittaya, Burin

2016-02-01

Anal fistula anatomy and its relationship with anal sphincters are important factors influencing the results of surgical management. Pre-operative definitions of fistulous track(s) and the internal opening play a primary role in minimizing damage to the sphincters and recurrence of the fistula. To evaluate the relative accuracy of digital examination and endoanal ultrasound for pre-operative assessment of anal fistula by comparing operative findings. A retrospective review was conducted of all patients with anal fistula admitted to the surgical unit between May 2008 and May 2012. Physical examination and hydrogen peroxide-enhanced endoanal ultrasound (utilising a 10 MHz endoprobe, HITACHI: EUB-7500), were performed in 142 consecutive patients. Results were matched with surgical features to establish their accuracy in preoperative anal fistula assessment. A total of 142 patients (107 men, 35 women), 28 of whom had had previous surgery, were included in the study. Their mean age was 40 (range 18-71) years and their mean BMI was 26.37 (range 17.30-36.11) kg/m². The majority of the fistulas were transphincteric (90.4%) and the rest were intersphincteric (9.6%). The accuracy rates of clinical examination and endoanal ultrasound were 55.63 and 95.07 percent (p < 0.01), respectively. Endoanal ultrasound is superior to digital examination for pre-operative classification of anal fistula

AVC/H.264 patent portfolio license

NASA Astrophysics Data System (ADS)

Skandalis, Dean A.

2006-08-01

MPEG LA, LLC offers a joint patent license for the AVC (a/k/a H.264) Standard (ISO/IEC IS 14496-10:2004). Like MPEG LA's other licenses, the AVC Patent Portfolio License is offered for the convenience of the marketplace as an alternative enabling users to access essential intellectual property owned by many patent holders under a single license rather than negotiating licenses with each of them individually. The AVC Patent Portfolio License includes essential patents owned by DAEWOO Electronics Corporation; Electronics and Telecommunications Research Institute (ETRI); France Telecom, societe anonyme; Fujitsu Limited; Hitachi, Ltd.; Koninklijke Philips Electronics N.V.; LG Electronics Inc.; Matsushita Electric Industrial Co., Ltd.; Microsoft Corporation; Mitsubishi Electric Corporation; Robert Bosch GmbH; Samsung Electronics Co., Ltd.; Sedna Patent Services, LLC; Sharp Kabushiki Kaisha; Siemens AG; Sony Corporation; The Trustees of Columbia University in the City of New York; Toshiba Corporation; UB Video Inc.; and Victor Company of Japan, Limited. Another is expected also to join as of August 1, 2006. MPEG LA's objective is to provide worldwide access to as much AVC essential intellectual property as possible for the benefit of AVC users. Therefore, any party that believes it has essential patents is welcome to submit them for evaluation of their essentiality and inclusion in the License if found essential.

Development of the compact proton beam therapy system dedicated to spot scanning with real-time tumor-tracking technology

NASA Astrophysics Data System (ADS)

Umezawa, Masumi; Fujimoto, Rintaro; Umekawa, Tooru; Fujii, Yuusuke; Takayanagi, Taisuke; Ebina, Futaro; Aoki, Takamichi; Nagamine, Yoshihiko; Matsuda, Koji; Hiramoto, Kazuo; Matsuura, Taeko; Miyamoto, Naoki; Nihongi, Hideaki; Umegaki, Kikuo; Shirato, Hiroki

2013-04-01

Hokkaido University and Hitachi Ltd. have started joint development of the Gated Spot Scanning Proton Therapy with Real-Time Tumor-Tracking System by integrating real-time tumor tracking technology (RTRT) and the proton therapy system dedicated to discrete spot scanning techniques under the "Funding Program for World-Leading Innovative R&D on Science and Technology (FIRST Program)". In this development, we have designed the synchrotron-based accelerator system by using the advantages of the spot scanning technique in order to realize a more compact and lower cost proton therapy system than the conventional system. In the gated irradiation, we have focused on the issues to maximize irradiation efficiency and minimize the dose errors caused by organ motion. In order to understand the interplay effect between scanning beam delivery and target motion, we conducted a simulation study. The newly designed system consists of the synchrotron, beam transport system, one compact rotating gantry treatment room with robotic couch, and one experimental room for future research. To improve the irradiation efficiency, the new control function which enables multiple gated irradiations per synchrotron cycle has been applied and its efficacy was confirmed by the irradiation time estimation. As for the interplay effect, we confirmed that the selection of a strict gating width and scan direction enables formation of the uniform dose distribution.

Repeatability of shear wave elastography in liver fibrosis phantoms—Evaluation of five different systems

PubMed Central

2018-01-01

This study aimed to assess and validate the repeatability and agreement of quantitative elastography of novel shear wave methods on four individual tissue-mimicking liver fibrosis phantoms with different known Young’s modulus. We used GE Logiq E9 2D-SWE, Philips iU22 ARFI (pSWE), Samsung TS80A SWE (pSWE), Hitachi Ascendus (SWM) and Transient Elastography (TE). Two individual investigators performed all measurements non-continued and in parallel. The methods were evaluated for inter- and intraobserver variability by intraclass correlation, coefficient of variation and limits of agreement using the median elastography value. All systems used in this study provided high repeatability in quantitative measurements in a liver fibrosis phantom and excellent inter- and intraclass correlations. All four elastography platforms showed excellent intra-and interobserver agreement (interclass correlation 0.981–1.000 and intraclass correlation 0.987–1.000) and no significant difference in mean elasticity measurements for all systems, except for TE on phantom 4. All four liver fibrosis phantoms could be differentiated by quantitative elastography, by all platforms (p<0.001). In the Bland-Altman analysis the differences in measurements were larger for the phantoms with higher Young’s modulus. All platforms had a coefficient of variation in the range 0.00–0.21 for all four phantoms, equivalent to low variance and high repeatability. PMID:29293527

Improvement of conventional transcutaneous bilirubinometry results in term newborn infants.

PubMed

Felc, Zlata

2005-05-01

This prospective study was performed to determine a way to improve conventional transcutaneous bilirubinometry results in healthy term newborn infants. In 118 infants during phototherapy (group A), and in 118 infants without phototherapy (group B), bilirubin determinations were done in duplicate using the Minolta AirShields Jaundice Meter type 101 (transcutaneous bilirubin index [TcB]), and the diazometric method on the Hitachi 717 Automated Analyzer (total reacting serum bilirubin [SeB]). In 112 infants (group C), bilirubin determinations were done in triplicate, using simple direct-reading photometry on the Moltronic Bilirubinometer (direct serum bilirubin [BiB]). A close correlation between TcB and SeB values was observed in group A ( r = 0.69; p < 0.001) and in group B ( r = 0.59; p < 0.001). The 95% confidence intervals of TcB readings corresponding to SeB were +/- 80.7 micromol/L in group A and +/- 76.9 micromol/L in group B, respectively. In group C, using a correctly calibrated BiB with adult sera containing bilirubin concentration in the range 271 to 344 micromol/L, the 95% confidence intervals of parallel TcB and BiB readings corresponding to SeB were +/- 28 micromol/L. Parallel determinations of the TcB and the BiB in healthy term newborn infants give results almost identical to those of bilirubin determination by the laboratory method.

Comparison of low and high frequency transducers in the detection of liver metastases.

PubMed

Schacherer, D; Wrede, C; Obermeier, F; Schölmerich, J; Schlottmann, K; Klebl, F

2006-09-01

To evaluate the benefit of the additional use of a high frequency ultrasound probe (7.5 MHz) in finding suspicious liver lesions compared to the examination using a 3.5-MHz transducer only. One hundred and fifty-seven patients with underlying malignant disease were examined with both transducers using one of three ultrasound machines (Siemens Sonoline Elegra, GE Healthcare Logic 9, or Hitachi EUB-8500). Findings on hepatic lesions were collected on a standardised documentation sheet and evaluated by descriptive statistics. Ninety-three patients (59.2% of all patients) showed no evident liver lesion on conventional ultrasound with the 3.5 MHz probe. In 29 patients (18.5%) new suspicious liver lesions were found by using the high frequency transducer. Thirteen of these 29 patients (44.8%) were suspected to suffer from diffuse infiltration of the liver with malignant lesions or at least 10 additional visible lesions. In 14 patients, no liver lesion had been known before high frequency ultrasound examination. The size of newly described liver lesions ranged from 2 mm to 1.5 cm. Time needed for the additional examination with the high frequency transducer ranged between 1 and 15 min with an average of 4.0 min. The additional use of a high frequency transducer in patients with underlying malignant disease slightly extends the examination time, but reveals new, potentially malignant hepatic lesions in almost every fifth patient.

Inkjet-Printed Nanocavities on a Photonic Crystal Template.

PubMed

Brossard, Frederic S F; Pecunia, Vincenzo; Ramsay, Andrew J; Griffiths, Jonathan P; Hugues, Maxime; Sirringhaus, Henning

2017-12-01

The last decade has witnessed the rapid development of inkjet printing as an attractive bottom-up microfabrication technology due to its simplicity and potentially low cost. The wealth of printable materials has been key to its widespread adoption in organic optoelectronics and biotechnology. However, its implementation in nanophotonics has so far been limited by the coarse resolution of conventional inkjet-printing methods. In addition, the low refractive index of organic materials prevents the use of "soft-photonics" in applications where strong light confinement is required. This study introduces a hybrid approach for creating and fine tuning high-Q nanocavities, involving the local deposition of an organic ink on the surface of an inorganic 2D photonic crystal template using a commercially available high-resolution inkjet printer. The controllability of this approach is demonstrated by tuning the resonance of the printed nanocavities by the number of printer passes and by the fabrication of photonic crystal molecules with controllable splitting. The versatility of this method is evidenced by the realization of nanocavities obtained by surface deposition on a blank photonic crystal. A new method for a free-form, high-density, material-independent, and high-throughput fabrication technique is thus established with a manifold of opportunities in photonic applications. © 2017 Hitachi Cambridge Laboratory. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Surface scanning inspection system particle detection dependence on aluminum film morphology

NASA Astrophysics Data System (ADS)

Prater, Walter; Tran, Natalie; McGarvey, Steve

2012-03-01

Physical vapor deposition (PVD) aluminum films present unique challenges when detecting particulate defects with a Surface Scanning Inspection System (SSIS). Aluminum (Al) films 4500Å thick were deposited on 300mm particle grade bare Si wafers at two temperatures using a Novellus Systems INOVA® NExT,.. Film surface roughness and morphology measurements were performed using a Veeco Vx310® atomic force microscope (AFM). AFM characterization found the high deposition temperature (TD) Al roughness (Root Mean Square 16.5 nm) to be five-times rougher than the low-TD Al roughness (rms 3.7 nm). High-TD Al had grooves at the grain boundaries that were measured to be 20 to 80 nm deep. Scanning electron microscopy (SEM) examination, with a Hitachi RS6000 defect review SEM, confirmed the presence of pronounced grain grooves. SEM images established that the low-TD filmed wafers have fine grains (0.1 to 0.3 um diameter) and the high-TD film wafers have fifty-times larger equiaxed plateletshape grains (5 to 15 um diameter). Calibrated Poly-Styrene Latex (PSL) spheres ranging in size from 90 nm to 1 μm were deposited in circular patterns on the wafers using an aerosol deposition chamber. PSL sphere depositions at each spot were controlled to yield 2000 to 5000 counts. A Hitachi LS9100® dark field full wafer SSIS was used to experimentally determine the relationship of the PSL sphere scattered light intensity with S-polarized light, a measure of scattering cross-section, with respect to the calibrated PSL sphere diameter. Comparison of the SSIS scattered light versus PSL spot size calibration curves shows two distinct differences. Scattering cross-section (intensity) of the PSL spheres increased on the low-TD Al film with smooth surface roughness and the low-TD Al film defect detection sensitivity was 126 nm compared to 200 nm for the rougher high- TD Al film. This can be explained by the higher signal to noise attributed to the smooth low-TD Al. Dark field defect detection on

PREFACE: 7th International Conference on Applications of Physics in Financial Analysis

NASA Astrophysics Data System (ADS)

Takayasu, M.; Watanabe, T.; Ikeda, Y.; Takayasu, H.

2010-04-01

become interested in such datasets, conducting empirical investigations about various aspects of economic activities. Specifically, they have searched for regularities and 'laws' akin to the ones in natural science, successfully producing fascinating results, as shown in the papers contained in this volume. Each paper submitted for publication in this volume has gone through the refereeing process, and has been revised on the basis of comments and discussion at the conference as well as comments from the anonymous referees. Finally, 19 papers were accepted for publication. The editors are very grateful to the colleagues involved in the refereeing process for their rapid and careful reviewing of the papers. We thank Takayuki Mizuno, Koji Sakai, Hiwon Yoon and Hiroki Matsui for their support for the conference. We appreciate the administrative assistance provided by Yayoi Hatano of Hitotsubashi University, and Masahiko Ozaki, Masato Yamada and Tomoko Kase of RIETI. We are most grateful to the authors for their contributions, as well as to the participants, all of whom made this conference stimulating and enjoyable. Misako Takayasu Tokyo Institute of Technology, Japan Tsutomu Watanabe Hitotsubashi University, Japan RIETI, Japan Yuichi Ikeda Hitachi Research Laboratory, Hitachi Ltd, Japan Hideki Takayasu Sony Computer Science Laboratories, Inc, Japan

The CloudBoard Research Platform: an interactive whiteboard for corporate users

NASA Astrophysics Data System (ADS)

Barrus, John; Schwartz, Edward L.

2013-03-01

Over one million interactive whiteboards (IWBs) are sold annually worldwide, predominantly for classroom use with few sales for corporate use. Unmet needs for IWB corporate use were investigated and the CloudBoard Research Platform (CBRP) was developed to investigate and test technology for meeting these needs. The CBRP supports audio conferencing with shared remote drawing activity, casual capture of whiteboard activity for long-term storage and retrieval, use of standard formats such as PDF for easy import of documents via the web and email and easy export of documents. Company RFID badges and key fobs provide secure access to documents at the board and automatic logout occurs after a period of inactivity. Users manage their documents with a web browser. Analytics and remote device management is provided for administrators. The IWB hardware consists of off-the-shelf components (a Hitachi UST Projector, SMART Technologies, Inc. IWB hardware, Mac Mini, Polycom speakerphone, etc.) and a custom occupancy sensor. The three back-end servers provide the web interface, document storage, stroke and audio streaming. Ease of use, security, and robustness sufficient for internal adoption was achieved. Five of the 10 boards installed at various Ricoh sites have been in daily or weekly use for the past year and total system downtime was less than an hour in 2012. Since CBRP was installed, 65 registered users, 9 of whom use the system regularly, have created over 2600 documents.

Elastography in the differential diagnosis of thyroid nodules in Hashimoto thyroiditis.

PubMed

Şahin, Mustafa; Çakal, Erman; Özbek, Mustafa; Güngünes, Aşkin; Arslan, Müyesser Sayki; Akkaymak, Esra Tutal; Uçan, Bekir; Ünsal, Ilknur Öztürk; Bozkurt, Nujen Çolak; Delibaşi, Tuncay

2014-08-01

Elastography is a method which assesses the risk of the malignancy and provides information about the degree of hardness in tissue. Hashimoto's thyroiditis, autoimmune lymphocytic infiltration and fibrosis, is considered to be a very common disease that is able to change the hardness of the tissue. The diagnostic value of elastography of this group of patients has not previously been reported. In our study, we aimed to determine the diagnostic value of elastography in 283 patients (255 female, 28 male) with Hashimoto's thyroiditis. Elastography score and index were measured with real-time ultrasound elastography (Hitachi(®) EUB 7000 HV machine with using 13 MHz linear transducer). The outcome of this measure shows that malignant nodules were with higher elastography scores (ES) and strain indexes (SI) values. ES ≥3 were observed in 16/20 malignant and 130/263 benign nodules, respectively. The area under the curve (AUC) for the elasto score (AUC) was 0.72 (p = 0.001), and AUC for the strain index was 0.77 (p < 0.0001). Accordingly, our study suggests that strain index reflects malignancy better than the elasto score. We conclude that elastography score is ≥3 providing 80 % sensitivity and 50 %, six specificity for diagnosing malignancy. For strain index, we found that 2.45 (72.2 % sensitivity and 70 % specificity) is a cut-off point. We have detected a lower cut-off point for SI in Hashimoto patients although sensitivity and specificity decreases in Hashimoto in this population.

New paleoradiological investigations of ancient human remains from North West Lombardy archaeological excavations.

PubMed

Licata, Marta; Borgo, Melania; Armocida, Giuseppe; Nicosia, Luca; Ferioli, Elena

2016-03-01

Since its birth in 1895, radiology has been used to study ancient mummies. The purpose of this article is to present paleoradiological investigations conducted on several medieval human remains in Varese province. Anthropological (generic identification) and paleopathological analyses were carried out with the support of diagnostic imaging (X-ray and CT scans). Human remains were discovered during excavations of medieval archaeological sites in northwest Lombardy. Classical physical anthropological methods were used for the macroscopic identification of the human remains. X-ray and CT scans were performed on the same scanner (16-layer Hitachi Eclos 16 X-ray equipment). Results Radiological analysis permitted investigating (1) the sex, (2) age of death, (3) type of trauma, (4) therapeutic interventions and (5) osteomas in ancient human remains. In particular, X-ray and CT examinations showed dimorphic facial traits on the mummified skull, and the same radiological approaches allowed determining the age at death from a mummified lower limb. CT analyses allow investigating different types of traumatic lesions in skulls and postcranial skeleton portions and reconstructing the gait and functional outcomes of a fractured femur. Moreover, one case of possible Gardner’s syndrome (GS) was postulated from observing multiple osteomas in an ancient skull. Among the medical tests available to the clinician, radiology is the most appropriate first-line procedure for a diagnostic approach to ancient human remains because it can be performed without causing any significant damage to the specimen.

Nano-enabled tribological thin film coatings: global patent scenario.

PubMed

Sivudu, Kurva S; Mahajan, Yashwant R; Joshi, Shrikant V

2014-01-01

The aim of this paper is to present current status and future prospects of nano-enabled tribological thin film coatings based on worldwide patent landscape analysis. The study also presents an overview of technological trends by carrying out state-of-the-art literature analysis, including survey of corporate websites. Nanostructured tribological coatings encompass a wide spectrum of nanoscale microstructures, including nanocrystalline, nanolayered, nano-multilayered, nanocomposite, nanogradient structures or their unique combinations, which are composed of single or multi-component phases. The distinct microstructural features of the coatings impart outstanding tribological properties combined with multifunctional attributes to the coated components. Their unique combination of remarkable properties make them ideal candidates for a wide range of applications in diverse fields such as cutting and metalworking tools, biomedical devices, automotive engine components, wear parts, hard disc drives etc. The patent landscape analysis has revealed that nano-enabled tribological thin film coatings have significant potential for commercial applications in view of the lion's share of corporate industry in patenting activity. The largest patent portfolio is held by Japan followed by USA, Germany, Sweden and China. The prominent players involved in this field are Mitsubishi Materials Corp., Sandvik Aktiebolag, Hitachi Ltd., Sumitomo Electric Industries Ltd., OC Oerlikon Corp., and so on. The outstanding potential of nanostructured thin film tribological coatings is yet to be fully unravelled and, therefore, immense opportunities are available in future for microstructurally engineered novel coatings to enhance their performance and functionality by many folds.

Defect window analysis by using SEM-contour based shape quantifying method for sub-20nm node production

NASA Astrophysics Data System (ADS)

Hibino, Daisuke; Hsu, Mingyi; Shindo, Hiroyuki; Izawa, Masayuki; Enomoto, Yuji; Lin, J. F.; Hu, J. R.

2013-04-01

The impact on yield loss due to systematic defect which remains after Optical Proximity Correction (OPC) modeling has increased, and achieving an acceptable yield has become more difficult in the leading technology beyond 20 nm node production. Furthermore Process-Window has become narrow because of the complexity of IC design and less process margin. In the past, the systematic defects have been inspected by human-eyes. However the judgment by human-eyes is sometime unstable and not accurate. Moreover an enormous amount of time and labor will have to be expended on the one-by-one judgment for several thousands of hot-spot defects. In order to overcome these difficulties and improve the yield and manufacturability, the automated system, which can quantify the shape difference with high accuracy and speed, is needed. Inspection points could be increased for getting higher yield, if the automated system achieves our goal. Defect Window Analysis (DWA) system by using high-precision-contour extraction from SEM image on real silicon and quantifying method which can calculate the difference between defect pattern and non-defect pattern automatically, which was developed by Hitachi High-Technologies, has been applied to the defect judgment instead of the judgment by human-eyes. The DWA result which describes process behavior might be feedback to design or OPC or mask. This new methodology and evaluation results will be presented in detail in this paper.

Correlation of salivary glucose level with blood glucose level in diabetes mellitus.

PubMed

Gupta, Shreya; Nayak, Meghanand T; Sunitha, J D; Dawar, Geetanshu; Sinha, Nidhi; Rallan, Neelakshi Singh

2017-01-01

Saliva is a unique fluid, which is important for normal functioning of the oral cavity. Diabetes mellitus (DM) is a disease of absolute or relative insulin deficiency characterized by insufficient secretion of insulin by pancreatic beta-cells. The diagnosis of diabetes through blood is difficult in children, older adults, debilitated and chronically ill patients, so diagnosis by analysis of saliva can be potentially valuable as collection of saliva is noninvasive, easier and technically insensitive, unlike blood. The aim of the study was to correlate blood glucose level (BGL) and salivary glucose level (SGL) in DM patients. A cross-sectional study was conducted in 120 patients, who were categorized as 40 controlled diabetics, 40 uncontrolled diabetics and 40 healthy, age- and sex-matched individuals constituted the controls. The blood and unstimulated saliva samples were collected from the patients at the different intervals for fasting, random and postprandial levels. These samples were then subjected for analysis of glucose in blood and saliva using glucose oxidase/peroxidase reagent in HITACHI 902 (R) Automatic analyzer, and the results were recorded. The mean SGLs were higher in uncontrolled and controlled diabetic groups than in nondiabetic group. A highly statistically significant correlation was found between fasting saliva glucose and fasting blood glucose in all the groups. With increase in BGL, increase in SGL was observed in patients with diabetes suggesting that SGL can be used for monitoring glycemic level in DM.

Mediaprocessors in medical imaging for high performance and flexibility

NASA Astrophysics Data System (ADS)

Managuli, Ravi; Kim, Yongmin

2002-05-01

New high performance programmable processors, called mediaprocessors, have been emerging since the early 1990s for various digital media applications, such as digital TV, set-top boxes, desktop video conferencing, and digital camcorders. Modern mediaprocessors, e.g., TI's TMS320C64x and Hitachi/Equator Technologies MAP-CA, can offer high performance utilizing both instruction-level and data-level parallelism. During this decade, with continued performance improvement and cost reduction, we believe that the mediaprocessors will become a preferred choice in designing imaging and video systems due to their flexibility in incorporating new algorithms and applications via programming and faster-time-to-market. In this paper, we will evaluate the suitability of these mediaprocessors in medical imaging. We will review the core routines of several medical imaging modalities, such as ultrasound and DR, and present how these routines can be mapped to mediaprocessors and their resultant performance. We will analyze the architecture of several leading mediaprocessors. By carefully mapping key imaging routines, such as 2D convolution, unsharp masking, and 2D FFT, to the mediaprocessor, we have been able to achieve comparable (if not better) performance to that of traditional hardwired approaches. Thus, we believe that future medical imaging systems will benefit greatly from these advanced mediaprocessors, offering significantly increased flexibility and adaptability, reducing the time-to-market, and improving the cost/performance ratio compared to the existing systems while meeting the high computing requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Brunett, Acacia J.; Passerini, Stefano

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory (Argonne) participated in a two year collaboration to modernize and update the probabilistic risk assessment (PRA) for the PRISM sodium fast reactor. At a high level, the primary outcome of the project was the development of a next-generation PRA that is intended to enable risk-informed prioritization of safety- and reliability-focused research and development. A central Argonne task during this project was a reliability assessment of passive safety systems, which included the Reactor Vessel Auxiliary Cooling System (RVACS) and the inherent reactivity feedbacks of the metal fuel core. Both systems were examinedmore » utilizing a methodology derived from the Reliability Method for Passive Safety Functions (RMPS), with an emphasis on developing success criteria based on mechanistic system modeling while also maintaining consistency with the Fuel Damage Categories (FDCs) of the mechanistic source term assessment. This paper provides an overview of the reliability analyses of both systems, including highlights of the FMEAs, the construction of best-estimate models, uncertain parameter screening and propagation, and the quantification of system failure probability. In particular, special focus is given to the methodologies to perform the analysis of uncertainty propagation and the determination of the likelihood of violating FDC limits. Additionally, important lessons learned are also reviewed, such as optimal sampling methodologies for the discovery of low likelihood failure events and strategies for the combined treatment of aleatory and epistemic uncertainties.« less

Correlation of salivary glucose level with blood glucose level in diabetes mellitus

PubMed Central

Gupta, Shreya; Nayak, Meghanand T; Sunitha, JD; Dawar, Geetanshu; Sinha, Nidhi; Rallan, Neelakshi Singh

2017-01-01

Background: Saliva is a unique fluid, which is important for normal functioning of the oral cavity. Diabetes mellitus (DM) is a disease of absolute or relative insulin deficiency characterized by insufficient secretion of insulin by pancreatic beta-cells. The diagnosis of diabetes through blood is difficult in children, older adults, debilitated and chronically ill patients, so diagnosis by analysis of saliva can be potentially valuable as collection of saliva is noninvasive, easier and technically insensitive, unlike blood. The aim of the study was to correlate blood glucose level (BGL) and salivary glucose level (SGL) in DM patients. Methodology: A cross-sectional study was conducted in 120 patients, who were categorized as 40 controlled diabetics, 40 uncontrolled diabetics and 40 healthy, age- and sex-matched individuals constituted the controls. The blood and unstimulated saliva samples were collected from the patients at the different intervals for fasting, random and postprandial levels. These samples were then subjected for analysis of glucose in blood and saliva using glucose oxidase/peroxidase reagent in HITACHI 902(R) Automatic analyzer, and the results were recorded. Results: The mean SGLs were higher in uncontrolled and controlled diabetic groups than in nondiabetic group. A highly statistically significant correlation was found between fasting saliva glucose and fasting blood glucose in all the groups. Conclusion: With increase in BGL, increase in SGL was observed in patients with diabetes suggesting that SGL can be used for monitoring glycemic level in DM. PMID:29391704

[Regional differences in ikigai (reason(s) for living) in elderly people--relationship between ikigai and family structure, physiological situation and functional capacity].

PubMed

Hasegawa, Akihiro; Fujiwara, Yoshinori; Hoshi, Tanji; Shinkai, Shoji

2003-07-01

The purpose of this paper is a) to make a comparative study of the existence of ikigai (reason(s) for living) in elderly people and its relevance to their family structure, physiological situation and functional capacity in both rural areas and metropolitan suburban areas, and b) position basic research into the structure of ikigai in the near future, by clarifying several related factors, from which the concept of ikigai may be defined. The meaning of the word "ikigai" in Japanese is difficult to express exactly, and specialists in gerontology have varying definitions. If ikigai were translated from Japanese into English, it could be "reason(s) for living", "self-actualization", "meaning of life" and/or "purpose in life". In this paper, ikigai is used to mean "feeling of being alive now and/or individual motivation for living". As of October 2000, we studied 1,544 people aged 65 years and over living in town Y of Niigata Prefecture (rural area), and as of January 2001, we studied 1,002 people in the same age group in town H of Saitama Prefecture (metropolitan suburban area). The above investigations revealed the following characteristics:--(a) Regarding the percentages of persons having or not having ikigai, there were no significant differences between the rural area and the metropolitan suburban area. (b) In both areas, the 3 factors of self-rated level of health, intellectual activeness and social roles, were associated with having ikigai. (c) In the rural area, the family structure was strongly associated with having ikigai, but gender or generation were irrelevant. (d) In the metropolitan suburban area, the hospitalization experience of men was strongly associated with ikigai. Furthermore, there was a strong correlation with generation. In this regard, while the contents of ikigai are seldom examined in detail, clarification of the structure of ikigai should be worked out in the next stage of the study, using covariance structure analysis. In addition the

[Association between fruit availability at home and fruit-related eating behavior among sixth-grade schoolchildren in Sakado City, Japan].

PubMed

Takamura, Miho; Okubo, Hitomi; Sasaki, Satoshi; Takemi, Yukari

2010-03-01

The recommended daily intake of fruits in Japan is 200 g, but average actual intake is much lower. We examined associations between self-reported fruit availability at home and fruit-related eating behavior among sixth-grade schoolchildren in Sakado City, Saitama Prefecture, Japan. As part of a larger study of school children in Sakado City, 659 sixth-grade from all 13 primary schools in the city completed a survey in their classroom in October 2007 (valid respondent rate 92%). Dietary intake over the previous 1-month period was assessed with a brief, self-administered diet history questionnaires for 10-year-olds. A second questionnaire also assessed health, dietary knowledge, attitudes and behaviors, and perceived food availability at home. Children reported fruit availability at home using the four options of always, often, sometimes, or never. Associations between fruit availability at home and fruit-related eating behaviors were statistically tested, including perception of the importance of and self-efficacy in eating fruits for health as well as the frequency of eating fruit by children and their family, with all analyses conducted separately by gender. Mean fruit intake was the highest among those children who reported that fruits were always available at home (boys 54 g/1,000 kcal, girls 65 g/1,000 kcal), followed by those reporting availability as often (31 g/1,000 kcal, 37 g/1,000 kcal), sometimes (16 g/1,000 kcal, 13 g/1,000 kcal), or never (9 g/1,000 kcal, 12 g/1,000 kcal). Availability was positively associated with intake (P for trend < 0.001). Additionally, it was positively associated with childrens' perception of the importance of eating fruit for better health (boys only, P < 0.001), self-efficacy in eating more fruit (P < 0.001), and the family frequency of eating fruit (P < 0.001). These findings suggest that fruit availability at home is a significant factor in fruit-related eating behavior, consistent with results of similar studies in western

Absolute quantum yield measurement of powder samples.

PubMed

Moreno, Luis A

2012-05-12

Measurement of fluorescence quantum yield has become an important tool in the search for new solutions in the development, evaluation, quality control and research of illumination, AV equipment, organic EL material, films, filters and fluorescent probes for bio-industry. Quantum yield is calculated as the ratio of the number of photons absorbed, to the number of photons emitted by a material. The higher the quantum yield, the better the efficiency of the fluorescent material. For the measurements featured in this video, we will use the Hitachi F-7000 fluorescence spectrophotometer equipped with the Quantum Yield measuring accessory and Report Generator program. All the information provided applies to this system. Measurement of quantum yield in powder samples is performed following these steps: 1. Generation of instrument correction factors for the excitation and emission monochromators. This is an important requirement for the correct measurement of quantum yield. It has been performed in advance for the full measurement range of the instrument and will not be shown in this video due to time limitations. 2. Measurement of integrating sphere correction factors. The purpose of this step is to take into consideration reflectivity characteristics of the integrating sphere used for the measurements. 3. Reference and Sample measurement using direct excitation and indirect excitation. 4. Quantum Yield calculation using Direct and Indirect excitation. Direct excitation is when the sample is facing directly the excitation beam, which would be the normal measurement setup. However, because we use an integrating sphere, a portion of the emitted photons resulting from the sample fluorescence are reflected by the integrating sphere and will re-excite the sample, so we need to take into consideration indirect excitation. This is accomplished by measuring the sample placed in the port facing the emission monochromator, calculating indirect quantum yield and correcting the direct

Real-Time Elastography Visualization and Histopathological Characterization of Rabbit Atherosclerotic Carotid Arteries.

PubMed

Wang, ZhenZhen; Liu, NaNa; Zhang, LiFeng; Li, XiaoYing; Han, XueSong; Peng, YanQing; Dang, MeiZheng; Sun, LiTao; Tian, JiaWei

2016-01-01

To evaluate the feasibility of non-invasive vascular real-time elastography imaging (RTE) in visualizing the composition of rabbit carotid atherosclerotic plaque as determined by histopathology, a rabbit model of accelerated carotid atherosclerosis was used. Thirty rabbits were randomly divided into two groups of 15 rabbits each. The first group was fed a cholesterol-rich diet and received balloon-induced injury the left common carotid artery endothelium, whereas the second group only received a cholesterol-rich diet. The rabbits were all examined in vivo with HITACHI non-invasive vascular real-time elastography (Hi-RTE) at baseline and 12 wk, and results from the elastography were compared with American Heart Association histologic classifications. Hi-RTE and the American Heart Association histologic classifications had good agreement, with weighted Cohen's kappa (95% confidence internal) of 0.785 (0.649-0.920). Strains of segmented plaques that were stained in different colors were statistically different (p < 0.0001). The sensitivity and specificity of elastograms for detecting a lipid core were 95.5% and 61.5%, respectively, and the area under the receiver operating characteristic curve was 0.789, with a 95% confidence interval of 0.679 to 0.876. This study is the first to indicate the feasibility of utilizing Hi-RTE in visualizing normal and atherosclerotic rabbit carotid arteries non-invasively. This affordable and reliable method can be widely applied in research of both animal and human peripheral artery atherosclerosis. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Multicentre physiological reference intervals for serum concentrations of immunoglobulins A, G and M, complement C3c and C4 measured with Tina-Quant reagents systems.

PubMed

Fuentes-Arderiu, Xavier; Alonso-Gregorio, Eduardo; Alvarez-Funes, Virtudes; Ambrós-Marigómez, Carmen; Coca-Fábregas, Lluís; Cruz-Placer, Marta; Díaz-Fernández, Julián; Pinel-Julián, María Pilar; Gutiérrez-Cecchini, Beatriz; Herrero-Bernal, Pilar; Sempere-Alcocer, Marcos; García-Caballero, Francisca; Del Mar Larrea-Ortiz-Quintana, María; La-Torre-Marcellán, Pedro; Del Señor López-Vélez, María; Mar-Medina, Carmen; Martín-Oncina, Javier; Rodríguez-Hernández, María Victoria; Romero-Sotomayor, María Victoria; Serrano-López, Cándido; Sicilia-Enríquez-de-Salamanca, Adolfo; Velasco-Romero, Ana María; Juvé-Cuxart, Santiago

2007-01-01

Clinical laboratories seeking accreditation for compliance with ISO 15189:2003 need to demonstrate that the physiological reference intervals communicated to all users of the laboratory service are appropriate for the patient population served and for the measurement systems used. In the case of immunological quantities, few articles have been published in peer-reviewed journals. A total of 21 clinical laboratories in different regions of Spain collaborated in identifying reference individuals and determining adult reference intervals for some immunological quantities measured using RD/Hitachi Modular Analytics analysers and Tina-Quant reagent systems. These immunological quantities are the mass concentrations of immunoglobulin A, immunoglobulin G, immunoglobulin M, complement C3c and complement C4 in serum. All the logistic work was carried out in co-operation with the supplier of the reagents and analysers (Roche Diagnostics España, S.L., Sant Cugat del Vallès, Catalonia, Spain). From the set of reference values obtained by each laboratory, multicentre reference limits were estimated non-parametrically. The reference intervals estimated in this study for concentrations of serum components under consideration are: complement C3c, 0.62-1.64 g/L for women and men; complement C4, 0.14-0.72 g/L for women and men; immunoglobulin A, 0.89-4.80 g/L for women and men; immunoglobulin G, 6.5-14.3 g/L for women and men; and immunoglobulin M, 0.48-3.38 g/L for women and 0.41-2.46 g/L for men.

Development and Evaluation of a New Creatine Kinase MB Mass Determination Assay Using a Latex Agglutination Turbidimetric Immunoassay with an Automated Analyzer.

PubMed

Hoshino, Tadashi; Hanai, Kazuma; Tanimoto, Kazuhito; Nakayama, Tomohiro

2016-01-01

The diagnosis of myocardial infraction (MI) in patients presenting to the emergency department represents a clinical challenge. It is known that creatine kinase-MB isoenzyme (CK-MB) is present in soluble cell fractions of cardiac muscle, and injury to those cells results in an increase of CK-MB in the blood. Therefore, CK-MB is a suitable clinical biomarker of myocardial infraction. To measure CK-MB mass rapidly and easily, we developed the new reagent 'L-type Wako CK-MB mass' (L-CK-MB mass) for the latex agglutination turbidimetric immunoassay method. Using a Hitachi LABOSPECT 008, we evaluated the performance of this assay as a method for quantifying CK-MB mass, and we compared the measurement of the serum CK-MB mass concentration with this assay to that obtained using an electrochemiluminescence immunoassay (ECLIA). A dilution test showed linearity from 5 μg/L to 190 μg/L, and the limit of quantification of the L-CK-MB mass assay was 3.0 μg/L. The within-run CV and between-day CV were 1.0 - 4.5% and 1.8 - 4.4%, respectively. Serum CK-MB mass concentration determined using the L-CK-MB mass assay was reliably and strongly correlated with that determined using ECLIA (n = 163, r = 0.999, y = 0.977x + 0.307). The L-CK-MB mass assay is able to specifically determine CK-MB mass and is a very useful method for the accurate measurement of CK-MB mass for routine clinical analyses.

Traceability Assessment and Performance Evaluation of Results for Measurement of Abbott Clinical Chemistry Assays on 4 Chemistry Analyzers.

PubMed

Lim, Jinsook; Song, Kyung Eun; Song, Sang Hoon; Choi, Hyun-Jung; Koo, Sun Hoe; Kwon, Gye Choel

2016-05-01

-The traceability of clinical results to internationally recognized and accepted reference materials and reference measurement procedures has become increasingly important. Therefore, the establishment of traceability has become a mandatory requirement for all in vitro diagnostics devices. -To evaluate the traceability of the Abbott Architect c8000 system (Abbott Laboratories, Abbott Park, Illinois), consisting of calibrators and reagents, across 4 different chemistry analyzers, and to evaluate its general performance on the Toshiba 2000FR NEO (Toshiba Medical Systems Corporation, Otawara-shi, Tochigi-ken, Japan). -For assessment of traceability, secondary reference materials were evaluated 5 times, and then bias was calculated. Precision, linearity, and carryover were determined according to the guidelines of the Clinical and Laboratory Standards Institute (Wayne, Pennsylvania). -The biases from 4 different analyzers ranged from -2.33% to 2.70% on the Toshiba 2000FR NEO, -2.33% to 5.12% on the Roche Hitachi 7600 (Roche Diagnostics International, Basel, Switzerland), -0.93% to 2.87% on the Roche Modular, and -2.16% to 2.86% on the Abbott Architect c16000. The total coefficients of variance of all analytes were less than 5%. The coefficients of determination (R(2)) were more than 0.9900. The carryover rate ranged from -0.54% to 0.17%. -Abbott clinical chemistry assays met the performance criteria based on desirable biological variation for precision, bias, and total error. They also showed excellent linearity and carryover. Therefore, these clinical chemistry assays were found to be accurate and reliable and are readily applicable on the various platforms used in this study.

Adenosine Deaminase activity and HLA-DRB as diagnostic markers for Rheumatoid Arthritis.

PubMed

Valadbeigi, Shirin; Ebrahimi-Rad, Mina; Khatami, Shohreh; Akhbari, Hadi; Saghiri, Reza

2018-04-05

Rheumatoid Arthritis (RA) is a chronic multi systemic disorder with the unclarified ethiopathology. Although several markers have been presented for recognition of RA, but none of them has been specific. New markers such as HLA typing and activity of Adenosine deaminase (ADA) isoenzymes could be useful and specific. The aim of this study is to evaluate the pattern of ADA isoenzymes activity and HLA typing in both RA patients and healthy cases. Blood samples were collected from 55 RA patients and 60 healthy subjects, over a period of 6 months. Levels of C-reactive protein (CRP), rheumatoid factor (RF) and ADA (ADA1, ADA2, total ADA) were measured using AVITEX kit and HITACHI Auto Analyzer. In addition, HLA-DRB1*1,*04 and *010 was detected using PCR-SSP. ADA activity, particularly ADA2 level, was significantly higher among RA group (P<0.05). The concentrations of tADA in patients with RF and CRP positive were significantly higher (P <0.05). The allele prevalence of DRB1*10 and *01 was significantly higher in RA patients (8.3% and 13.1%, respectively) compared with control group (2.51% and 5.5%, respectively) (P <0.05). Calculated sensitivity and specificity for diagnostic tests in this study are listed as: CRP (75%), RF (80%), ADA (84%) and RF (90%), ADA (83%), CRP (72%), respectively. Increase tADA level and the frequency of DRB1*010 and *01 caused to susceptibility to RA. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

New drilling rigs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tubb, M.

1981-02-01

Friede and Goldman Ltd. of New Orleans, Louisiana has a successful drilling rig, the L-780 jack-up series. The triangular-shaped drilling vessel measures 180 x 176 ft. and is equipped with three 352 ft legs including spud cans. It is designed to work in up to 250 ft waters and drill to 20,000 ft depths. The unit is scheduled to begin initial drilling operations in the Gulf of Mexico for Arco. Design features are included for the unit. Davie Shipbuilding Ltd. has entered the Mexican offshore market with the signing of a $40,000,000 Canadian contract for a jack-up to work inmore » 300 ft water depths. Baker Marine Corporation has contracted with the People's Republic of China for construction of two self-elevating jack-ups. The units will be built for Magnum Marine, headquartered in Houston. Details for the two rigs are given. Santa Fe International Corporation has ordered a new jack-up rig to work initially in the Gulf of Suez. The newly ordered unit, Rig 136, will be the company's fourth offshore drilling rig now being built in the Far East. Temple Drilling Company has signed a construction contract with Bethlehem Steel for a jack-up to work in 200 ft water depths. Penrod Drilling Company has ordered two additional cantilever type jack-ups for Hitachi Shipbuilding and Engineering Co. Ltd. of Japan. Two semi-submersibles, capable of working in up to 2000 ft water depths, have been ordered by two Liberian companies. Details for these rigs are included. (DP)« less

Effect of electric potential and current on mandibular linear measurements in cone beam CT.

PubMed

Panmekiate, S; Apinhasmit, W; Petersson, A

2012-10-01

The purpose of this study was to compare mandibular linear distances measured from cone beam CT (CBCT) images produced by different radiographic parameter settings (peak kilovoltage and milliampere value). 20 cadaver hemimandibles with edentulous ridges posterior to the mental foramen were embedded in clear resin blocks and scanned by a CBCT machine (CB MercuRay(TM); Hitachi Medico Technology Corp., Chiba-ken, Japan). The radiographic parameters comprised four peak kilovoltage settings (60 kVp, 80 kVp, 100 kVp and 120 kVp) and two milliampere settings (10 mA and 15 mA). A 102.4 mm field of view was chosen. Each hemimandible was scanned 8 times with 8 different parameter combinations resulting in 160 CBCT data sets. On the cross-sectional images, six linear distances were measured. To assess the intraobserver variation, the 160 data sets were remeasured after 2 weeks. The measurement precision was calculated using Dahlberg's formula. With the same peak kilovoltage, the measurements yielded by different milliampere values were compared using the paired t-test. With the same milliampere value, the measurements yielded by different peak kilovoltage were compared using analysis of variance. A significant difference was considered when p < 0.05. Measurement precision varied from 0.03 mm to 0.28 mm. No significant differences in the distances were found among the different radiographic parameter combinations. Based upon the specific machine in the present study, low peak kilovoltage and milliampere value might be used for linear measurements in the posterior mandible.

SU-F-T-156: Monte Carlo Simulation Using TOPAS for Synchrotron Based Proton Discrete Spot Scanning System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moskvin, V; Pirlepesov, F; Tsiamas, P

Purpose: This study provides an overview of the design and commissioning of the Monte Carlo (MC) model of the spot-scanning proton therapy nozzle and its implementation for the patient plan simulation. Methods: The Hitachi PROBEAT V scanning nozzle was simulated based on vendor specifications using the TOPAS extension of Geant4 code. FLUKA MC simulation was also utilized to provide supporting data for the main simulation. Validation of the MC model was performed using vendor provided data and measurements collected during acceptance/commissioning of the proton therapy machine. Actual patient plans using CT based treatment geometry were simulated and compared to themore » dose distributions produced by the treatment planning system (Varian Eclipse 13.6), and patient quality assurance measurements. In-house MATLAB scripts are used for converting DICOM data into TOPAS input files. Results: Comparison analysis of integrated depth doses (IDDs), therapeutic ranges (R90), and spot shape/sizes at different distances from the isocenter, indicate good agreement between MC and measurements. R90 agreement is within 0.15 mm across all energy tunes. IDDs and spot shapes/sizes differences are within statistical error of simulation (less than 1.5%). The MC simulated data, validated with physical measurements, were used for the commissioning of the treatment planning system. Patient geometry simulations were conducted based on the Eclipse produced DICOM plans. Conclusion: The treatment nozzle and standard option beam model were implemented in the TOPAS framework to simulate a highly conformal discrete spot-scanning proton beam system.« less

Missed detection of significant positive and negative shifts in gentamicin assay: implications for routine laboratory quality practices.

PubMed

Koerbin, Gus; Liu, Jiakai; Eigenstetter, Alex; Tan, Chin Hon; Badrick, Tony; Loh, Tze Ping

2018-02-15

A product recall was issued for the Roche/Hitachi Cobas Gentamicin II assays on 25 th May 2016 in Australia, after a 15 - 20% positive analytical shift was discovered. Laboratories were advised to employ the Thermo Fisher Gentamicin assay as an alternative. Following the reintroduction of the revised assay on 12 th September 2016, a second reagent recall was made on 20 th March 2017 after the discovery of a 20% negative analytical shift due to erroneous instrument adjustment factor. The practices of an index laboratory were examined to determine how the analytical shifts evaded detection by routine internal quality control (IQC) and external quality assurance (EQA) systems. The ability of the patient result-based approaches, including moving average (MovAvg) and moving sum of outliers (MovSO) approaches in detecting these shifts were examined. Internal quality control data of the index laboratory were acceptable prior to the product recall. The practice of adjusting IQC target following a change in assay method resulted in the missed negative shift when the revised Roche assay was reintroduced. While the EQA data of the Roche subgroup showed clear negative bias relative to other laboratory methods, the results were considered as possible 'matrix effect'. The MovAvg method detected the positive shift before the product recall. The MovSO did not detect the negative shift in the index laboratory but did so in another laboratory 5 days before the second product recall. There are gaps in current laboratory quality practices that leave room for analytical errors to evade detection.

High throughput web inspection system using time-stretch real-time imaging

NASA Astrophysics Data System (ADS)

Kim, Chanju

Photonic time-stretch is a novel technology that enables capturing of fast, rare and non-repetitive events. Therefore, it operates in real-time with ability to record over long period of time while having fine temporal resolution. The powerful property of photonic time-stretch has already been employed in various fields of application such as analog-to-digital conversion, spectroscopy, laser scanner and microscopy. Further expanding the scope, we fully exploit the time-stretch technology to demonstrate a high throughput web inspection system. Web inspection, namely surface inspection is a nondestructive evaluation method which is crucial for semiconductor wafer and thin film production. We successfully report a dark-field web inspection system with line scan speed of 90.9 MHz which is up to 1000 times faster than conventional inspection instruments. The manufacturing of high quality semiconductor wafer and thin film may directly benefit from this technology as it can easily locate defects with area of less than 10 microm x 10 microm where it allows maximum web flow speed of 1.8 km/s. The thesis provides an overview of our web inspection technique, followed by description of the photonic time-stretch technique which is the keystone in our system. A detailed explanation of each component is covered to provide quantitative understanding of the system. Finally, imaging results from a hard-disk sample and flexible films are presented along with performance analysis of the system. This project was the first application of time-stretch to industrial inspection, and was conducted under financial support and with close involvement by Hitachi, Ltd.

Relationship of body mass index to percent body fat and waist circumference among schoolchildren in Japan--the influence of gender and obesity: a population-based cross-sectional study.

PubMed

Ochiai, Hirotaka; Shirasawa, Takako; Nishimura, Rimei; Morimoto, Aya; Shimada, Naoki; Ohtsu, Tadahiro; Kujirai, Emiko; Hoshino, Hiromi; Tajima, Naoko; Kokaze, Akatsuki

2010-08-18

Although the correlation coefficient between body mass index (BMI) and percent body fat (%BF) or waist circumference (WC) has been reported, studies conducted among population-based schoolchildren to date have been limited in Japan, where %BF and WC are not usually measured in annual health examinations at elementary schools or junior high schools. The aim of the present study was to investigate the relationship of BMI to %BF and WC and to examine the influence of gender and obesity on these relationships among Japanese schoolchildren. Subjects included 3,750 schoolchildren from the fourth and seventh grade in Ina-town, Saitama Prefecture, Japan between 2004 and 2008. Information about subject's age, sex, height, weight, %BF, and WC was collected from annual physical examinations. %BF was measured with a bipedal biometrical impedance analysis device. Obesity was defined by the following two criteria: the obese definition of the Centers for Disease Control and Prevention, and the definition of obesity for Japanese children. Pearson's correlation coefficients between BMI and %BF or WC were calculated separately for sex. Among fourth graders, the correlation coefficients between BMI and %BF were 0.74 for boys and 0.97 for girls, whereas those between BMI and WC were 0.94 for boys and 0.90 for girls. Similar results were observed in the analysis of seventh graders. The correlation coefficient between BMI and %BF varied by physique (obese or non-obese), with weaker correlations among the obese regardless of the definition of obesity; most correlation coefficients among obese boys were less than 0.5, whereas most correlations among obese girls were more than 0.7. On the other hand, the correlation coefficients between BMI and WC were more than 0.8 among boys and almost all coefficients were more than 0.7 among girls, regardless of physique. BMI was positively correlated with %BF and WC among Japanese schoolchildren. The correlations could be influenced by obesity as well

Relationship of body mass index to percent body fat and waist circumference among schoolchildren in Japan - the influence of gender and obesity: a population-based cross-sectional study

PubMed Central

2010-01-01

Background Although the correlation coefficient between body mass index (BMI) and percent body fat (%BF) or waist circumference (WC) has been reported, studies conducted among population-based schoolchildren to date have been limited in Japan, where %BF and WC are not usually measured in annual health examinations at elementary schools or junior high schools. The aim of the present study was to investigate the relationship of BMI to %BF and WC and to examine the influence of gender and obesity on these relationships among Japanese schoolchildren. Methods Subjects included 3,750 schoolchildren from the fourth and seventh grade in Ina-town, Saitama Prefecture, Japan between 2004 and 2008. Information about subject's age, sex, height, weight, %BF, and WC was collected from annual physical examinations. %BF was measured with a bipedal biometrical impedance analysis device. Obesity was defined by the following two criteria: the obese definition of the Centers for Disease Control and Prevention, and the definition of obesity for Japanese children. Pearson's correlation coefficients between BMI and %BF or WC were calculated separately for sex. Results Among fourth graders, the correlation coefficients between BMI and %BF were 0.74 for boys and 0.97 for girls, whereas those between BMI and WC were 0.94 for boys and 0.90 for girls. Similar results were observed in the analysis of seventh graders. The correlation coefficient between BMI and %BF varied by physique (obese or non-obese), with weaker correlations among the obese regardless of the definition of obesity; most correlation coefficients among obese boys were less than 0.5, whereas most correlations among obese girls were more than 0.7. On the other hand, the correlation coefficients between BMI and WC were more than 0.8 among boys and almost all coefficients were more than 0.7 among girls, regardless of physique. Conclusions BMI was positively correlated with %BF and WC among Japanese schoolchildren. The correlations

En bloc pancreaticoduodenectomy and right hemicolectomy for locally advanced right-sided colon cancer.

PubMed

Kaneda, Yuji; Noda, Hiroshi; Endo, Yuhei; Kakizawa, Nao; Ichida, Kosuke; Watanabe, Fumiaki; Kato, Takaharu; Miyakura, Yasuyuki; Suzuki, Koichi; Rikiyama, Toshiki

2017-09-15

To assess the usefulness of en bloc right hemicolectomy with pancreaticoduodenectomy (RHCPD) for locally advanced right-sided colon cancer (LARCC). We retrospectively reviewed the database of Saitama Medical Center, Jichi Medical University, between January 2009 and December 2016. During this time, 299 patients underwent radical right hemicolectomy for right-sided colon cancer. Among them, 5 underwent RHCPD for LARCC with tumor infiltration to adjacent organs. Preoperative computed tomography (CT) was routinely performed to evaluate local tumor infiltration into adjacent organs. During the operation, we evaluated the resectability and the amount of infiltration into the adjacent organs without dissecting the adherent organs from the cancer. When we confirmed that radical resection was feasible and could lead to R0 resection, we performed RHCPD. The clinical data were carefully reviewed, and the demographic variables, intraoperative data, and postoperative parameters were recorded. The median age of the 5 patients who underwent RHCPD for LARCC was 70 years. The tumors were located in the ascending colon (three patients) and transverse colon (two patients). Preoperative CT revealed infiltration of the tumor into the duodenum in all patients, the pancreas in four patients, the superior mesenteric vein (SMV) in two patients, and tumor thrombosis in the SMV in one patient. We performed RHCPD plus SMV resection in three patients. Major postoperative complications occurred in 3 patients (60%) as pancreatic fistula (grade B and grade C, according to International Study Group on Pancreatic Fistula Definition) and delayed gastric empty. None of the patients died during their hospital stay. A histological examination confirmed malignant infiltration into the duodenum and/or pancreas in 4 patients (80%), and no patients showed any malignant infiltration into the SMV. Two patients were histologically confirmed to have tumor thrombosis in the SMV. All of the tumors had clear

Work hours, sleep sufficiency, and prevalence of depression among full-time employees: a community-based cross-sectional study.

PubMed

Nakata, Akinori

2011-05-01

Depression due to long work hours and sleep deprivation is a major occupational health concern. The extent to which work hours and sleep are associated with depression was investigated in employees of small- and medium-scale businesses in the Japanese city of Yashio, Saitama, and in the Ohta ward of Tokyo, a suburb of Tokyo, controlling for various potential confounders. In this cross-sectional study, a total of 2,643 full-time employees (1,928 men and 715 women), aged 18-79 years (mean = 45 years), in 296 small- and medium-scale businesses were surveyed from August 2002 to December 2002 using a self-administered questionnaire evaluating work hours, sleep status, and covariates including sociodemographic and socioeconomic factors, health behaviors, biological factors, medication usage, and occupational factors. Depression was assessed using the Center for Epidemiologic Studies Depression Scale. Prevalence of depression by work hours, sleep status, and covariates was analyzed by χ² test. Risk of depression by work hours, sleep status, and both combined was estimated by multivariate logistic regression analysis. Participants working > 10 hours per day, sleeping < 6 hours per day, and reporting insufficient sleep were, respectively, 37%, 43%, and 97% more likely to be depressed than those working 6 to 8 hours per day, sleeping 6 to < 8 hours per day, and reporting sufficient sleep (P < .05). Participants working > 10 hours per day or > 8 to 10 hours per day with < 6 hours per day of sleep showed a 41%-169% higher prevalence of depression versus those working 6 to 8 hours per day with 6+ hours per day of sleep (P < .05). Participants reporting insufficient sleep in 3 work-hour categories (6 to 8, > 8 to 10, and > 10 hours per day) showed a 62%-179% increase in the prevalence of depression versus those working 6 to 8 hours per day and reporting sufficient sleep (P < .05). No significant effects on depression were found for subjects in any work-hour category with 6

[Prevalence and characteristics of social isolation in the elderly in a dormitory suburb according to household composition].

PubMed

Saito, Masashige; Fujiwara, Yoshinori; Kobayashi, Erika; Fukaya, Taro; Nishi, Mariko; Shinkai, Syoji

2010-09-01

The purpose of this paper is to clarify the prevalence and characteristics of social isolation in elderly individuals living alone or with others in a dormitory suburb, and to examine the characteristics of non-responders to questions concerning social isolation. Data were obtained from a survey of 978 elderly (aged 65 and over) individuals living alone and 1,529 elderly individuals living together in Wako-shi, Saitama. The frequencies of contacts with non-co-resident children, relatives, friends, and neighbors were used to operationally define social isolation. Based on these responses, those who had contact with any of the above groups less than 2 or 3 times a month were termed "isolated elderly", those who had contact with these more than once a week were termed "non-isolated elderly", and those who did not answer these questions were termed "nonresponders". In addition, a logistic regression analysis was conducted to examine differences among the characteristics of isolated elderly between these households. Also, a multiple comparison analysis was performed to clarify the characteristics of non-responders. The major findings were as follows: 1) rates of prevalence of the isolated elderly were 24.01% for elderly living alone, and 28.7% for elderly living with others, respectively; 2) the elderly who were male, childless or living distant from children, and of lower income tended to be more socially isolated whether they were living alone or not; 3) a difference in isolation was noted between living alone and together in that divorced and unmarried elderly tended to be isolated when living alone while older and frail elderly tended to be isolated even when living together; 4) the characteristics of "nonresponders" were similar to those of the isolated elderly for both those living alone and living together. These findings suggest that social support for the socially isolated elderly should be adequately planned considering differences in the characteristics of

Studies on Anthropogenic Impact on Water Quality in Hilo (Hawaii) Bay and Mapping the Study Stations Using Geospatial Technologies

NASA Astrophysics Data System (ADS)

Cartier, A. J.; Williams, M. S.; Adolf, J.; Sriharan, S.

2015-12-01

Hilo Bay has uncharacteristically brown waters compared to other waters found in Hawai'i. The majority of the freshwater entering Hilo Bay is from storm and surface water runoff. The anthropogenic impact on water quality at Hilo Bay is due to sediment entrance, cesspools (Bacteria), and invasive species (Albizia). This poster presentation will focus on the water quality and phytoplankton collected on a weekly basis at a buoy positioned one meter from the shore of Hilo Bay, preserving the phytoplankton intact, concentrating and dehydrating the sample with ethanol, and viewing the phytoplankton with a scanning electron microscope (Hitachi S-3400NII). The GPS (Global Positioning System) points were collected at the sampling stations. Three transects on three separate dates were performed in Hilo Bay with salinity, percent dissolved oxygen, turbidity, secchi depth, temperature, and chlorophyll fluorescence data collected at each sampling station. A consistent trend observed in all transects was as distance from the river increased turbidity decreased and salinity increased. The GPS data on June 30, 2015 showed a major correlation between stations and their distance from shore. There is a decrease in the turbidity but not the temperature for these stations. The GPS points collected on July 7, 2015 at thirteen stations starting with station one being at the shore to the water, showed that the salinity concentration fluctuate noticeably at the first 6 stations. As we proceed further away from the shore, the salinity concentration increases from stations seven through thirteen. The water temperature shows little variation throughout the thirteen stations. The turbidity level was high at the shore and shows a noticeable drop at station thirteen.

An evaluation of the DRI-ETG EIA method for the determination of ethyl glucuronide concentrations in clinical and post-mortem urine.

PubMed

Turfus, Sophie C; Vo, Tu; Niehaus, Nadia; Gerostamoulos, Dimitri; Beyer, Jochen

2013-06-01

A commercial enzyme immunoassay for the qualitative and semi-quantitative measurement of ethyl glucuronide (EtG) in urine was evaluated. Post-mortem (n=800), and clinical urine (n=200) samples were assayed using a Hitachi 902 analyzer. The determined concentrations were compared with those obtained using a previously published liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the quantification of EtG and ethyl sulfate. Using a cut-off of 0.5 µg/ml and LC-MS/MS limit of reporting of 0.1 µg/ml, there was a sensitivity of 60.8% and a specificity of 100% for clinical samples. For post-mortem samples, sensitivity and specificity were 82.4% and 97.1%, respectively. When reducing the cut-off to 0.1 µg/ml, the sensitivity and specificity were 83.3% and 100% for clinical samples whereas for post-mortem samples the sensitivity and specificity were 90.3 % and 88.3 %, respectively. The best trade-offs between sensitivity and specificity for LC-MS/MS limits of reporting of 0.5 and 0.1 µg/ml were achieved when using immunoassay cut-offs of 0.3 and 0.092 µg/ml, respectively. There was good correlation between quantitative results obtained by both methods but analysis of samples by LC-MS/MS gave higher concentrations than by enzyme immunoassay (EIA), with a statistically significant proportional bias (P<0.0001, Deming regression) for both sample types. The immunoassay is reliable for the qualitative and semi-quantitative presumptive detection of ethyl glucuronide in urine. Copyright © 2012 John Wiley & Sons, Ltd.

Comparison of removal torques between laser-treated and SLA-treated implant surfaces in rabbit tibiae

PubMed Central

Kang, Nam-Seok; Li, Lin-Jie

2014-01-01

PURPOSE The purpose of this study was to compare removal torques and surface topography between laser treated and sandblasted, large-grit, acid-etched (SLA) treated implants. MATERIALS AND METHODS Laser-treated implants (experimental group) and SLA-treated implants (control group) 8 mm in length and 3.4 mm in diameter were inserted into both sides of the tibiae of 12 rabbits. Surface analysis was accomplished using a field emission scanning electron microscope (FE-SEM; Hitachi S-4800; Japan) under ×25, ×150 and ×1,000 magnification. Surface components were analyzed using energy dispersive spectroscopy (EDS). Rabbits were sacrificed after a 6-week healing period. The removal torque was measured using the MGT-12 digital torque meter (Mark-10 Co., Copiague, NY, USA). RESULTS In the experimental group, the surface analysis showed uniform porous structures under ×25, ×150 and ×1,000 magnification. Pore sizes in the experimental group were 20-40 mm and consisted of numerous small pores, whereas pore sizes in the control group were 0.5-2.0 mm. EDS analysis showed no significant difference between the two groups. The mean removal torque in the laser-treated and the SLA-treated implant groups were 79.4 Ncm (SD = 20.4; range 34.6-104.3 Ncm) and 52.7 Ncm (SD = 17.2; range 18.7-73.8 Ncm), respectively. The removal torque in the laser-treated surface implant group was significantly higher than that in the control group (P=.004). CONCLUSION In this study, removal torque values were significantly higher for laser-treated surface implants than for SLA-treated surface implants. PMID:25177474

[Association between urinary polycyclic aromatic hydrocarbon metabolites and elevated serum uric acid levels in coke oven workers].

PubMed

Deng, Siyun; Deng, Qifei; Hu, Die; Li, Jun; Zhu, Xiaoyan; Guo, Huan; Wu, Tangchun

2014-06-01

To analyze the relationship between metabolites of polycyclic aromatic hydrocarbons (PAHs) and serum uric acid levels in coke oven workers and to provide new clues to the pathogenic mechanism of PAHs. A total of 1302 coke oven workers were divided into four groups, namely control group and low-, intermediate-, and high-dose exposure groups. The concentrations of ambient PAHs at each workplace were determined by high-performance liquid chromatography. The detailed information on the occupational history and health of workers was collected by questionnaire survey and physical examination, and so were their blood and urine samples. Serum uric acid and creatinine levels were measured using a Hitachi 7020 automatic biochemical analyzer. Ten urinary PAH metabolites were detected by gas chromatography-mass spectrometry. Serum uric acid levels were the highest in the high-dose exposure group, followed by the intermediate- and low-dose exposure groups, and were the lowest in the control group. There were significant correlations between serum uric acid levels and the quartiles of 1-hydroxynaphthalene and 1-hydroxyphenanthrene (P < 0.05). After adjustment for PAH metabolite-related relationship, only urinary 1-hydroxyphenanthrene was significantly correlated with serum uric acid levels (P = 0.001). After adjustment for confounding factors and using the 1st quartile of 1-hydroxyphenanthrene as a reference, the odds ratio for hyperuricemia in subjects with the 2nd, 3rd, and 4th quartiles of 1-hydroxyphenanthrene were 1.55, 1.57, and 2.35, respectively. Urinary 1-hydroxyphenanthrene is associated with a dose-response increase in serum uric acid levels in coke oven workers, and exposure to phenanthrene in PAHs may be a risk factor for hyperuricemia.

Cell sheets image validation of phase-diversity homodyne OCT and effect of the light irradiation on cells

NASA Astrophysics Data System (ADS)

Senda, Naoko; Osawa, Kentaro

2016-04-01

Optical coherence tomography (OCT) is one of powerful 3D tissue imaging tools with no fluorescence staining. We have reported that Phase-Diversity Homodyne OCT developed in Hitachi could be useful for non-invasive regeneration tissue evaluation test. The OCT enables cell imaging because of high resolution (axial resolution; ~2.6 μm, lateral resolution; ~1 μm, in the air), whereas conventional OCT was not used for cell imaging because of low resolution (10~20 μm). Furthermore, the OCT has advantage over other 3D imaging devices in cost because the light source and the objective were originally used as an optical pickup of compact disc. In this report, we aimed to assess effectiveness and safety of Phase-Diversity Homodyne OCT cell imaging. Effectiveness of OCT was evaluated by imaging a living cell sheet of human oral mucosal epithelial cells. OCT images were compared with reflection confocal microscopy (RCM) images, because confocal optical system is the highest resolution (<1 μm) 3D in vivo imaging technique. Similar nuclei images were confirmed with OCT and RCM, which suggested the OCT has enough resolution to image nuclei inside a cell sheet. Degree of differentiation could be estimated using OCT images, which becomes possible because the size of cells depends on distribution of differentiation. Effect of the OCT light irradiation on cells was studied using NIH/3T3 cells. Light irradiation, the exposure amount of which is equivalent to OCT, had no impact on cell shape, cell viability, and proliferation rate. It suggested that the light irradiation has no cell damage under the condition.

Morphology and Elemental Composition of Recent and Fossil Cyanobacteria

NASA Technical Reports Server (NTRS)

SaintAmand, Ann; Hoover, Richard B.; Jerman, Gregory; Rozanov, Alexei Yu.

2005-01-01

Cyanobacteria (cyanophyta, cyanoprokaryota, and blue-green algae) are an ancient, diverse and abundant group of photosynthetic oxygenic microorganisms. Together with other bacteria and archaea, the cyanobacteria have been the dominant life forms on Earth for over 3.5 billion years. Cyanobacteria occur in some of our planets most extreme environments - hot springs and geysers, hypersaline and alkaline lakes, hot and cold deserts, and the polar ice caps. They occur in a wide variety of morphologies. Unlike archaea and other bacteria, which are typically classified in pure culture by their physiological, biochemical and phylogenetic properties, the cyanobacteria have historically been classified based upon their size and morphological characteristics. These include the presence or absence of heterocysts, sheath, uniseriate or multiseriate trichomes, true or false branching, arrangement of thylakoids, reproduction by akinetes, binary fission, hormogonia, fragmentation, presence/absence of motility etc. Their antiquity, distribution, structural and chemical differentiation, diversity, morphological complexity and large size compared to most other bacteria, makes the cyanobacteria ideal candidates for morphological biomarkers in returned Astromaterials. We have obtained optical (nomarski and phase contrast)/fluorescent (blue and green excitation) microscopy images using an Olympus BX60 compound microscope and Field Emission Scanning Electron Microscopy images and EDAX elemental compositions of living and fossil cyanobacteria. The S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM) has been used to investigate microfossils in freshly fractured interior surfaces of terrestrial rocks and the cells, hormogonia, sheaths and trichomes of recent filamentous cyanobacteria. We present Fluorescent and FESEM Secondary and Backscattered Electron images and associated EDAX elemental analyses of recent and fossil cyanobacteria, concentrating on representatives of the

Morphology and elemental composition of recent and fossil cyanobacteria

NASA Astrophysics Data System (ADS)

St. Amand, Ann; Hoover, Richard B.; Jerman, Gregory A.; Coston, James; Rozanov, Alexei Y.

2005-09-01

Cyanobacteria (cyanophyta, cyanoprokaryota, and blue-green algae) are an ancient, diverse and abundant group of photosynthetic oxygenic microorganisms. Together with other bacteria and archaea, the cyanobacteria have been the dominant life forms on Earth for over 3.5 billion years. Cyanobacteria occur in some of our planets most extreme environments - hot springs and geysers, hypersaline and alkaline lakes, hot and cold deserts, and the polar ice caps. They occur in a wide variety of morphologies. Unlike archaea and other bacteria, which are typically classified in pure culture by their physiological, biochemical and phylogenetic properties, the cyanobacteria have historically been classified based upon their size and morphological characteristics. These include the presence or absence of heterocysts, sheath, uniseriate or multiseriate trichomes, true or false branching, arrangement of thylakoids, reproduction by akinetes, binary fission, hormogonia, fragmentation, presence/absence of motility etc. Their antiquity, distribution, structural and chemical differentiation, diversity, morphological complexity and large size compared to most other bacteria, makes the cyanobacteria ideal candidates for morphological biomarkers in returned Astromaterials. We have obtained optical (nomarski and phase contrast)/fluorescent (blue and green excitation) microscopy images using an Olympus BX60 compound microscope and Field Emission Scanning Electron Microscopy images and EDAX elemental compositions of living and fossil cyanobacteria. The S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM) has been used to investigate microfossils in freshly fractured interior surfaces of terrestrial rocks and the cells, hormogonia, sheaths and trichomes of recent filamentous cyanobacteria. We present Fluorescent and FESEM Secondary and Backscattered Electron images and associated EDAX elemental analyses of recent and fossil cyanobacteria, concentrating on representatives of the

The Hollow Spheres of the Orgueil Meteorite: A Re-Examination

NASA Technical Reports Server (NTRS)

Hoover, Richard B.; Jerman, Gregory; Rossignold-Strick, Maritine

2005-01-01

In 1971, Rossignol-Strick and Barghoorn provided images and a description of a number of spherical hollow microstructures showing well-defined walls in acid macerated extract of the Orgueil CI carbonaceous meteorite. Other forms such as membranes and spiral shaped structures were also reported. The carbon-rich (kerogen) hollow spheres were found to be in a narrowly constrained distribution of sizes (mainly 7 to 10 microns in diameter). Electron microprobe analysis revealed that these spheres contained Carbon, possibly P, N, and K. It was established that these forms could not be attributed to pollen or other recent terrestrial contaminants. It was concluded that they most probably represented organic coatings on globules of glass, olivine or magnetite in the meteorite. However, recent studies of the Orgueil meteorite have been carried out at the NASA/Marshall Space Flight Center with the S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM). These investigations have revealed the presence of numerous carbon encrusted spherical magnetite platelets and spherical and ovoidal bodies of elemental iron in-situ in freshly fractured interior surfaces of the meteorite. Their size range is also very narrowly constrained (typically approximately 6 to 12 microns) in diameter. High resolution images reveal that these bodies are also encrusted with a thin carbonaceous sheath and are surrounded by short nanofibrils that are shown to be composed of high purity iron by EDAX elemental analysis. We present Secondary and Backscatter Electron FESEM images and associated EDAX elemental analyses and 2D X-ray maps of these forms as we re-examine the hollow spheres of Orgueil and attempt to determine if they are representatives of the same population of indigenous microstructures.

A new method to evaluate image quality of CBCT images quantitatively without observers

PubMed Central

Shimizu, Mayumi; Okamura, Kazutoshi; Yoshida, Shoko; Weerawanich, Warangkana; Tokumori, Kenji; Jasa, Gainer R; Yoshiura, Kazunori

2017-01-01

Objectives: To develop an observer-free method for quantitatively evaluating the image quality of CBCT images by applying just-noticeable difference (JND). Methods: We used two test objects: (1) a Teflon (polytetrafluoroethylene) plate phantom attached to a dry human mandible; and (2) a block phantom consisting of a Teflon step phantom and an aluminium step phantom. These phantoms had holes with different depths. They were immersed in water and scanned with a CB MercuRay (Hitachi Medical Corporation, Tokyo, Japan) at tube voltages of 120 kV, 100 kV, 80 kV and 60 kV. Superimposed images of the phantoms with holes were used for evaluation. The number of detectable holes was used as an index of image quality. In detecting holes quantitatively, the threshold grey value (ΔG), which differentiated holes from the background, was calculated using a specific threshold (the JND), and we extracted the holes with grey values above ΔG. The indices obtained by this quantitative method (the extracted hole values) were compared with the observer evaluations (the observed hole values). In addition, the contrast-to-noise ratio (CNR) of the shallowest detectable holes and the deepest undetectable holes were measured to evaluate the contribution of CNR to detectability. Results: The results of this evaluation method corresponded almost exactly with the evaluations made by observers. The extracted hole values reflected the influence of different tube voltages. All extracted holes had an area with a CNR of ≥1.5. Conclusions: This quantitative method of evaluating CBCT image quality may be more useful and less time-consuming than evaluation by observation. PMID:28045343

Development of Effective Connectivity during Own- and Other-Race Face Processing: A Granger Causality Analysis

PubMed Central

Zhou, Guifei; Liu, Jiangang; Ding, Xiao Pan; Fu, Genyue; Lee, Kang

2016-01-01

Numerous developmental studies have suggested that other-race effect (ORE) in face recognition emerges as early as in infancy and develops steadily throughout childhood. However, there is very limited research on the neural mechanisms underlying this developmental ORE. The present study used Granger causality analysis (GCA) to examine the development of children's cortical networks in processing own- and other-race faces. Children were between 3 and 13 years. An old-new paradigm was used to assess their own- and other-race face recognition with ETG-4000 (Hitachi Medical Co., Japan) acquiring functional near infrared spectroscopy (fNIRS) data. After preprocessing, for each participant and under each face condition, we obtained the causal map by calculating the weights of causal relations between the time courses of [oxy-Hb] of each pair of channels using GCA. To investigate further the differential causal connectivity for own-race faces and other-race faces at the group level, a repeated measure analysis of variance (ANOVA) was performed on the GCA weights for each pair of channels with the face race task (own-race face vs. other-race face) as the within-subject variable and the age as a between-subject factor (continuous variable). We found an age-related increase in functional connectivity, paralleling a similar age-related improvement in behavioral face processing ability. More importantly, we found that the significant differences in neural functional connectivity between the recognition of own-race faces and that of other-race faces were modulated by age. Thus, like the behavioral ORE, the neural ORE emerges early and undergoes a protracted developmental course. PMID:27713696

Laboratory Simulation of Electrical Discharge in Surface Lunar Regolith

NASA Astrophysics Data System (ADS)

Shusterman, M.; Izenberg, N.; Wing, B. R.; Liang, S.

2016-12-01

Physical, chemical, and optical characteristics of space-weathered surface materials on airless bodies are produced primarily from bombardment by solar energetic particles and micrometeoroid impacts. On bodies such as the Moon and Mercury, soils in permanently shadowed regions (PSRs) are very cold, have low electrical conductivities, and are subjected to a high flux of incoming energetic particles accelerated by solar events. Theoretical models predict that up to 25% of gardened soils in the lunar polar regions are altered by dielectric breakdown; a potentially significant weathering process that is currently unconfirmed. Although electrical properties of lunar soils have been studied in relation to flight electronics and spacecraft safety, no studies have characterized potential alterations to soils resulting from electrical discharge. To replicate the surface charge field in PSRs, lunar regolith simulant JSC-1A was placed between two parallel plane electrodes under both low and high vacuum environments, 10e-3 torr and 2.5e-6 torr, respectively. Voltage was increased until discharge occurred within the sample. Grains were analyzed using an SVC fiber-fed point spectrometer, Olympus BX51 upright metallurgical microscope, and a Hitachi TM3000 scanning electron microscope with Bruker Quantax-70 X-ray spectrometer. Discharges occurring in samples under low vacuum resulted in surficial melting, silicate vapor deposition, coalescence of metallic iron, and micro-scale changes to surface topography. Samples treated under a high vacuum environment showed similar types of effects, but fewer in number compared to low vacuum samples. The variation in alteration abundances between the two environments implies that discharges may be occurring across surface contaminants, even at high vacuum conditions, inhibiting dielectric breakdown in our laboratory simulations.

[Comparison of image distortion between three magnetic resonance imaging systems of different magnetic field strengths for use in stereotactic irradiation of brain].

PubMed

Takemura, Akihiro; Sasamoto, Kouhei; Nakamura, Kaori; Kuroda, Tatsunori; Shoji, Saori; Matsuura, Yukihiro; Matsushita, Tatsuhiko

2013-06-01

In this study, we evaluated the image distortion of three magnetic resonance imaging (MRI) systems with magnetic field strengths of 0.4 T, 1.5 T and 3 T, during stereotactic irradiation of the brain. A quality assurance phantom for MRI image distortion in radiosurgery was used for these measurements of image distortion. Images were obtained from a 0.4-T MRI (APERTO Eterna, HITACHI), a 1.5-T MRI (Signa HDxt, GE Healthcare) and a 3-T MRI (Signa HDx 3.0 T, GE Healthcare) system. Imaging sequences for the 0.4-T and 3-T MRI were based on the 1.5-T MRI sequence used for stereotactic irradiation in the clinical setting. The same phantom was scanned using a computed tomography (CT) system (Aquilion L/B, Toshiba) as the standard. The results showed mean errors in the Z direction to be the least satisfactory of all the directions in all results. The mean error in the Z direction for 1.5-T MRI at －110 mm in the axial plane showed the largest error of 4.0 mm. The maximum errors for the 0.4-T and 3-T MRI were 1.7 mm and 2.8 mm, respectively. The errors in the plane were not uniform and did not show linearity, suggesting that simple distortion correction using outside markers is unlikely to be effective. The 0.4-T MRI showed the lowest image distortion of the three. However, other items, such as image noise, contrast and study duration need to be evaluated in MRI systems when applying frameless stereotactic irradiation.

Power Doppler signal calibration between ultrasound machines by use of a capillary-flow phantom for pannus vascularity in rheumatoid finger joints: a basic study.

PubMed

Sakano, Ryosuke; Kamishima, Tamotsu; Nishida, Mutsumi; Horie, Tatsunori

2015-01-01

Ultrasound allows the detection and grading of inflammation in rheumatology. Despite these advantages of ultrasound in the management of rheumatoid patients, it is well known that there are significant machine-to-machine disagreements regarding signal quantification. In this study, we tried to calibrate the power Doppler (PD) signal of two models of ultrasound machines by using a capillary-flow phantom. After flow velocity analysis in the perfusion cartridge at various injection rates (0.1-0.5 ml/s), we measured the signal count in the perfusion cartridge at various injection rates and pulse repetition frequencies (PRFs) by using PD, perfusing an ultrasound micro-bubble contrast agent diluted with normal saline simulating human blood. By use of the data from two models of ultrasound machines, Aplio 500 (Toshiba) and Avius (Hitachi Aloka), the quantitative PD (QPD) index [the summation of the colored pixels in a 1 cm × 1 cm rectangular region of interest (ROI)] was calculated via Image J (internet free software). We found a positive correlation between the injection rate and the flow velocity. In Aplio 500 and Avius, we found negative correlations between the PRF and the QPD index when the flow velocity was constant, and a positive correlation between flow velocity and the QPD index at constant PRF. The equation for the relationship of the PRF between Aplio 500 and Avius was: y = 0.023x + 0.36 [y = PRF of Avius (kHz), x = PRF of Aplio 500 (kHz)]. Our results suggested that the signal calibration of various models of ultrasound machines is possible by adjustment of the PRF setting.

64nm pitch metal1 double patterning metrology: CD and OVL control by SEMCD, image based overlay and diffraction based overlay

NASA Astrophysics Data System (ADS)

Ducoté, Julien; Dettoni, Florent; Bouyssou, Régis; Le-Gratiet, Bertrand; Carau, Damien; Dezauzier, Christophe

2015-03-01

Patterning process control of advanced nodes has required major changes over the last few years. Process control needs of critical patterning levels since 28nm technology node is extremely aggressive showing that metrology accuracy/sensitivity must be finely tuned. The introduction of pitch splitting (Litho-Etch-Litho-Etch) at 14FDSOInm node requires the development of specific metrologies to adopt advanced process control (for CD, overlay and focus corrections). The pitch splitting process leads to final line CD uniformities that are a combination of the CD uniformities of the two exposures, while the space CD uniformities are depending on both CD and OVL variability. In this paper, investigations of CD and OVL process control of 64nm minimum pitch at Metal1 level of 14FDSOI technology, within the double patterning process flow (Litho, hard mask etch, line etch) are presented. Various measurements with SEMCD tools (Hitachi), and overlay tools (KT for Image Based Overlay - IBO, and ASML for Diffraction Based Overlay - DBO) are compared. Metrology targets are embedded within a block instanced several times within the field to perform intra-field process variations characterizations. Specific SEMCD targets were designed for independent measurement of both line CD (A and B) and space CD (A to B and B to A) for each exposure within a single measurement during the DP flow. Based on those measurements correlation between overlay determined with SEMCD and with standard overlay tools can be evaluated. Such correlation at different steps through the DP flow is investigated regarding the metrology type. Process correction models are evaluated with respect to the measurement type and the intra-field sampling.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vinke, R; Peng, H; Xing, L

Purpose: In searching for a robust, efficient and cost-effective dual energy cone beam CT (DECBCT) solution for various radiation oncology applications, in particularly for improved proton dose planning/replanning accuracy and DE-CBCT guided radiation therapy, we investigate a novel energy modulation scheme using a beam modifier placed between the source and patient and optimize its geometric configuration for routine clinical use. Methods: The study was performed using a Hitachi CBCT scanner and the tube voltage was set at 125 kVp. The higher energy beam was obtained by filtering the incident utilizing a beam modulation layer (material: copper, thickness: 1.8 mm). Tomore » avoid the need for double scans (one with and one without the energy modulator), the modulation layer was configured to cover only the half of the X-ray beam so that two sets of sinograms corresponding low and high energies were collected after a single gantry rotation of 360 deg. The average high energy and low energy HU numbers (HUhigh and HUlow) were derived for pixels in a defined region-of-interest, respectively. Results: The beam modifier increased the threshold of the energy spectrum from ∼20 keV up to ∼50 keV. Two complete sets of images were obtained with good alignment between the high energy and low-energy cases without any artifact observed (Fig. 2). The HUlow/HUhigh is ∼0/0 (water), ∼394/238 (brain), ∼1283/1085 (cortical bone) and ∼3000/1800 (titanium). Conclusion: The feasibility of the proposed DECT implementation using a beam modifier has been demonstrated. Compared to the existing DECT solutions, the proposed scheme is much more cost-effective and requires minimum hardware modification. The work lays foundation for us to study the quantification of HU values to derive material density images and atomic number (and electron density) of substances.« less

A Methodology for the Integration of a Mechanistic Source Term Analysis in a Probabilistic Framework for Advanced Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, Dave; Brunett, Acacia J.; Bucknor, Matthew

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level, the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of PRA methodologies to conduct a mechanistic source term (MST) analysis for event sequences that could result in the release ofmore » radionuclides. The MST analysis seeks to realistically model and assess the transport, retention, and release of radionuclides from the reactor to the environment. The MST methods developed during this project seek to satisfy the requirements of the Mechanistic Source Term element of the ASME/ANS Non-LWR PRA standard. The MST methodology consists of separate analysis approaches for risk-significant and non-risk significant event sequences that may result in the release of radionuclides from the reactor. For risk-significant event sequences, the methodology focuses on a detailed assessment, using mechanistic models, of radionuclide release from the fuel, transport through and release from the primary system, transport in the containment, and finally release to the environment. The analysis approach for non-risk significant event sequences examines the possibility of large radionuclide releases due to events such as re-criticality or the complete loss of radionuclide barriers. This paper provides details on the MST methodology, including the interface between the MST analysis and other elements of the PRA, and provides a simplified example MST calculation for a sodium fast reactor.« less

A Methodology for the Development of a Reliability Database for an Advanced Reactor Probabilistic Risk Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, Dave; Brunett, Acacia J.; Bucknor, Matthew

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of a reliability database (RDB) methodology to determine applicable reliability data for inclusion in the quantification of the PRA. The RDBmore » method developed during this project seeks to satisfy the requirements of the Data Analysis element of the ASME/ANS Non-LWR PRA standard. The RDB methodology utilizes a relevancy test to examine reliability data and determine whether it is appropriate to include as part of the reliability database for the PRA. The relevancy test compares three component properties to establish the level of similarity to components examined as part of the PRA. These properties include the component function, the component failure modes, and the environment/boundary conditions of the component. The relevancy test is used to gauge the quality of data found in a variety of sources, such as advanced reactor-specific databases, non-advanced reactor nuclear databases, and non-nuclear databases. The RDB also establishes the integration of expert judgment or separate reliability analysis with past reliability data. This paper provides details on the RDB methodology, and includes an example application of the RDB methodology for determining the reliability of the intermediate heat exchanger of a sodium fast reactor. The example explores a variety of reliability data sources, and assesses their applicability for the PRA of interest through the use of the relevancy test.« less

PREFACE: Synthesis and integration of nanowires

NASA Astrophysics Data System (ADS)

Samuelson, L.

2006-06-01

The field of semiconductor nanowires has attracted much attention in recent years, from the areas of basic materials science, advanced characterization and technology, as well as from the perspective of the applications of nanowires. Research on large-sized whiskers and wires had already begun in the 1960s with the pioneering work of Wagner, as well as by other researchers. It was, however, in the early 1990s that Kenji Hiruma at Hitachi Central Research Laboratories in Japan first succeeded in developing methods for the growth of nanowires with dimensions on the scale of 10-100 nm, thereby initiating the field of growth and applications of nanowires, with a strong emphasis on epitaxial nucleation of nanowires on a single-crystalline substrate. Starting from the mid-1990s, the field developed very rapidly with the number of papers on the subject growing from ten per year to several thousand papers on the subject published annually today, although with a rather generous definition of the concept of nanowires. With this rapid development we have seen many new and different approaches to the growth of nanowires, technological advances leading to a more well-controlled formation of nanowires, new innovative methods for the characterization of structures, as well as a wealth of approaches towards the use of nanowires in electronics, photonics and sensor applications. This issue contains contributions from many different laboratories, each adding significant detail to the development of the field of research. The contributions cover issues such as basic growth, advanced characterization and technology, and application of nanowires. I would like to acknowledge the shared responsibilities for this special issue of Nanotechnology on the synthesis and integration of nanowires with my co-Editors, S Tong Lee and M Sunkara, as well as the highly professional support from Dr Nina Couzin, Dr Ian Forbes and the Nanotechnology team from the Institute of Physics Publishing.

Influence of particle size on Cutting Forces and Surface Roughness in Machining of B4Cp - 6061 Aluminium Matrix Composites

NASA Astrophysics Data System (ADS)

Hiremath, Vijaykumar; Badiger, Pradeep; Auradi, V.; Dundur, S. T.; Kori, S. A.

2016-02-01

Amongst advanced materials, metal matrix composites (MMC) are gaining importance as materials for structural applications in particular, particulate reinforced aluminium MMCs have received considerable attention due to their superior properties such as high strength to weight ratio, excellent low-temperature performance, high wear resistance, high thermal conductivity. The present study aims at studying and comparing the machinability aspects of B4Cp reinforced 6061Al alloy metal matrix composites reinforced with 37μm and 88μm particulates produced by stir casting method. The micro structural characterization of the prepared composites is done using Scanning Electron Microscopy equipped with EDX analysis (Hitachi Su-1500 model) to identify morphology and distribution of B4C particles in the 6061Al matrix. The specimens are turned on a conventional lathe machine using a Polly crystalline Diamond (PCD) tool to study the effect of particle size on the cutting forces and the surface roughness under varying machinability parameters viz., Cutting speed (29-45 m/min.), Feed rate (0.11-0.33 mm/rev.) and depth of cut (0.5-1mm). Results of micro structural characterization revealed fairly uniform distribution of B4C particles (in both cases i.e., 37μm and 88μm) in 6061Al matrix. The surface roughness of the composite is influenced by cutting speed. The feed rate and depth of cut have a negative influence on surface roughness. The cutting forces decreased with increase in cutting speed whereas cutting forces increased with increase in feed and depth of cut. Higher cutting forces are noticed while machining Al6061 base alloy compared to reinforced composites. Surface finish is high during turning of the 6061Al base alloy and surface roughness is high with 88μm size particle reinforced composites. As the particle size increases Surface roughness also increases.

Efficacy of levetiracetam versus fosphenytoin for the recurrence of seizures after status epilepticus.

PubMed

Nakamura, Kensuke; Inokuchi, Ryota; Daidoji, Hiroaki; Naraba, Hiromu; Sonoo, Tomohiro; Hashimoto, Hideki; Tokunaga, Kurato; Hiruma, Takahiro; Doi, Kent; Morimura, Naoto

2017-06-01

Benzodiazepines are used as first-line treatments for status epilepticus. Fosphenytoin (FPHT) is recommended for second-line therapy; however, intravenous injection of levetiracetam (LEV) may also be effective against status epilepticus. Herein, we compared the efficacy and safety of LEV as a second-line treatment for status epilepticus with FPHT in Japanese patients.Patients with status epilepticus were selected from the database of the Emergency and Critical Care Center of Hitachi General Hospital. The subjects were patients whose status epilepticus was successfully stopped by diazepam, and in whom FPHT or LEV was administered after diazepam. As LEV injections recently became clinically available in Japan, the choice of drug was determined by the treatment period. Thus, 21 patients who were intravenously injected with LEV as a second-line therapy and 42 matched patients (historical controls) who were treated with FPHT (1:2) were selected.The subjects had a mean age of 64.0 ± 2.2 years, and included 48 males and 15 females. The status epilepticus control rates of the FPHT and LEV groups did not differ significantly (81.0% [34/42] vs 85.1% [18/21], respectively; P  =  .69). As for serious adverse events, a reduction in blood pressure was observed in the FPHT group, but not in the LEV group. The oral anticonvulsant switching rates of the 2 groups were similar, but the same-drug switching rates of the FPHT and LEV groups were 8.1% and 77.8%, respectively.The efficacy of intravenous LEV injections after status epilepticus was equivalent to that of FPHT, and the incidence of adverse events was lower in the LEV group. LEV is effective and safe at preventing recurrent seizures after status epilepticus following benzodiazepine treatment.

Effects of two types of medical contrast media on routine chemistry results by three automated chemistry analyzers.

PubMed

Park, Yu Jin; Rim, John Hoon; Yim, Jisook; Lee, Sang-Guk; Kim, Jeong-Ho

2017-08-01

The use of iodinated contrast media has grown in popularity in the past two decades, but relatively little attention has been paid to the possible interferential effects of contrast media on laboratory test results. Herein, we investigate medical contrast media interference with routine chemistry results obtained by three automated chemistry analyzers. Ten levels of pooled serum were used in the study. Two types of medical contrast media [Iopamiro (iopamidol) and Omnipaque (iohexol)] were evaluated. To evaluate the dose-dependent effects of the contrast media, iopamidol and iohexol were spiked separately into aliquots of serum for final concentrations of 1.8%, 3.6%, 5.5%, 7.3%, and 9.1%. The 28 analytes included in the routine chemistry panel were measured by using Hitachi 7600, AU5800, and Cobas c702 analyzers. We calculated the delta percentage difference (DPD) between the samples and the control, and examined dose-dependent trends. When the mean DPD values were compared with the reference cut-off criteria, the only uniformly interferential effect observed for all analyzers was in total protein with iopamidol. Two additional analytes that showed trends toward interferential effects only in few analyzers and exceeded the limits of the allowable error were the serum iron and the total CO 2 . The other combinations of analyzer and contrast showed no consistent dose-dependent propensity for change in any analyte level. Our study suggests that many of the analytes included in routine chemistry results, except total protein and serum iron, are not significantly affected by iopamidol and iohexol. These results suggest that it would be beneficial to apply a flexible medical evaluation process for patients requiring both laboratory tests and imaging studies, minimizing the need for strict regulations for sequential tests. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

A remote monitoring system for patients with implantable ventricular assist devices with a personal handy phone system.

PubMed

Okamoto, E; Shimanaka, M; Suzuki, S; Baba, K; Mitamura, Y

1999-01-01

The usefulness of a remote monitoring system that uses a personal handy phone for artificial heart implanted patients was investigated. The type of handy phone used in this study was a personal handy phone system (PHS), which is a system developed in Japan that uses the NTT (Nippon Telephone and Telegraph, Inc.) telephone network service. The PHS has several advantages: high-speed data transmission, low power output, little electromagnetic interference with medical devices, and easy locating of patients. In our system, patients have a mobile computer (Toshiba, Libretto 50, Kawasaki, Japan) for data transmission control between an implanted controller and a host computer (NEC, PC-9821V16) in the hospital. Information on the motor rotational angle (8 bits) and motor current (8 bits) of the implanted motor driven heart is fed into the mobile computer from the implanted controller (Hitachi, H8/532, Yokohama, Japan) according to 32-bit command codes from the host computer. Motor current and motor rotational angle data from inside the body are framed together by a control code (frame number and parity) for data error checking and correcting at the receiving site, and the data are sent through the PHS connection to the mobile computer. The host computer calculates pump outflow and arterial pressure from the motor rotational angle and motor current values and displays the data in real-time waveforms. The results of this study showed that accurate data on motor rotational angle and current could be transmitted from the subjects while they were walking or driving a car to the host computer at a data transmission rate of 9600 bps. This system is useful for remote monitoring of patients with an implanted artificial heart.

Development/Modernization of an Advanced Non-Light Water Reactor Probabilistic Risk Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henneke, Dennis W.; Robinson, James

In 2015, GE Hitachi Nuclear Energy (GEH) teamed with Argonne National Laboratory (Argonne) to perform Research and Development (R&D) of next-generation Probabilistic Risk Assessment (PRA) methodologies for the modernization of an advanced non-Light Water Reactor (non-LWR) PRA. This effort built upon a PRA developed in the early 1990s for GEH’s Power Reactor Inherently Safe Module (PRISM) Sodium Fast Reactor (SFR). The work had four main tasks: internal events development modeling the risk from the reactor for hazards occurring at-power internal to the plant; an all hazards scoping review to analyze the risk at a high level from external hazards suchmore » as earthquakes and high winds; an all modes scoping review to understand the risk at a high level from operating modes other than at-power; and risk insights to integrate the results from each of the three phases above. To achieve these objectives, GEH and Argonne used and adapted proven PRA methodologies and techniques to build a modern non-LWR all hazards/all modes PRA. The teams also advanced non-LWR PRA methodologies, which is an important outcome from this work. This report summarizes the project outcomes in two major phases. The first phase presents the methodologies developed for non-LWR PRAs. The methodologies are grouped by scope, from Internal Events At-Power (IEAP) to hazards analysis to modes analysis. The second phase presents details of the PRISM PRA model which was developed as a validation of the non-LWR methodologies. The PRISM PRA was performed in detail for IEAP, and at a broader level for hazards and modes. In addition to contributing methodologies, this project developed risk insights applicable to non-LWR PRA, including focus-areas for future R&D, and conclusions about the PRISM design.« less

Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface

NASA Astrophysics Data System (ADS)

Reza, M. S.; Aqida, S. N.; Ismail, I.

2016-06-01

Bonding strength of thermal spray coatings depends on the interfacial adhesion between bond coat and substrate material. In this paper, NiCrAlY (Ni-164/211 Ni22 %Cr10 %Al1.0 %Y) coatings were developed on laser modified H13 tool steel surface using atmospheric plasma spray (APS). Different laser peak power, P p, and duty cycle, DC, were investigated in order to improve the mechanical properties of H13 tool steel surface. The APS spraying parameters setting for coatings were set constant. The coating microstructure near the interface was analyzed using IM7000 inverted optical microscope. Interface bonding of NiCrAlY was investigated by interfacial indentation test (IIT) method using MMT-X7 Matsuzawa Hardness Tester Machine with Vickers indenter. Diffusion of atoms along NiCrAlY coating, laser modified and substrate layers was investigated by energy-dispersive X-ray spectroscopy (EDXS) using Hitachi Tabletop Microscope TM3030 Plus. Based on IIT method results, average interfacial toughness, K avg, for reference sample was 2.15 MPa m1/2 compared to sample L1 range of K avg from 6.02 to 6.96 MPa m1/2 and sample L2 range of K avg from 2.47 to 3.46 MPa m1/2. Hence, according to K avg, sample L1 has the highest interface bonding and is being laser modified at lower laser peak power, P p, and higher duty cycle, DC, prior to coating. The EDXS analysis indicated the presence of Fe in the NiCrAlY coating layer and increased Ni and Cr composition in the laser modified layer. Atomic diffusion occurred in both coating and laser modified layers involved in Fe, Ni and Cr elements. These findings introduce enhancement of coating system by substrate surface modification to allow atomic diffusion.

SU-E-T-439: Fundamental Verification of Respiratory-Gated Spot Scanning Proton Beam Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamano, H; Yamakawa, T; Hayashi, N

Purpose: The spot-scanning proton beam irradiation with respiratory gating technique provides quite well dose distribution and requires both dosimetric and geometric verification prior to clinical implementation. The purpose of this study is to evaluate the impact of gating irradiation as a fundamental verification. Methods: We evaluated field width, flatness, symmetry, and penumbra in the gated and non-gated proton beams. The respiration motion was distinguished into 3 patterns: 10, 20, and 30 mm. We compared these contents between the gated and non-gated beams. A 200 MeV proton beam from PROBEAT-III unit (Hitachi Co.Ltd) was used in this study. Respiratory gating irradiationmore » was performed by Quasar phantom (MODUS medical devices) with a combination of dedicated respiratory gating system (ANZAI Medical Corporation). For radiochromic film dosimetry, the calibration curve was created with Gafchromic EBT3 film (Ashland) on FilmQA Pro 2014 (Ashland) as film analysis software. Results: The film was calibrated at the middle of spread out Bragg peak in passive proton beam. The field width, flatness and penumbra in non-gated proton irradiation with respiratory motion were larger than those of reference beam without respiratory motion: the maximum errors of the field width, flatness and penumbra in respiratory motion of 30 mm were 1.75% and 40.3% and 39.7%, respectively. The errors of flatness and penumbra in gating beam (motion: 30 mm, gating rate: 25%) were 0.0% and 2.91%, respectively. The results of symmetry in all proton beams with gating technique were within 0.6%. Conclusion: The field width, flatness, symmetry and penumbra were improved with the gating technique in proton beam. The spot scanning proton beam with gating technique is feasible for the motioned target.« less

Real time elastography - a non-invasive diagnostic method of small hepatocellular carcinoma in cirrhosis.

PubMed

Gheorghe, Liana; Iacob, Speranta; Iacob, Razvan; Dumbrava, Mona; Becheanu, Gabriel; Herlea, Vlad; Gheorghe, Cristian; Lupescu, Ioana; Popescu, Irinel

2009-12-01

Small nodules (under 3 cm) detected on ultrasound (US) in cirrhotics represent the most challenging category for noninvasive diagnosis of hepatocellular carcinoma (HCC). To evaluate real-time sonoelastography as a noninvasive tool for the diagnosis of small HCC nodules in cirrhotic patients. 42 cirrhotic patients with 58 nodules (1-3 cm) were evaluated with real-time elastography (Hitachi EUB-6500); the mean intensity of colors red, blue, green were measured using a semi-quantitative method. Analysis of histograms for each color of the sonoelastography images was performed for quantifying the elasticity of nodule tissue in comparison with the cirrhotic liver tissue. AUROC curves were constructed to define the best cut-off points to distinguish malignant features of the nodules. Univariate and multivariate logistic regression analysis was performed. 595 sonoelastography images from 42 patients (25 men; 17 women) were analyzed. The mean age was 56.4 +/- 0.7 years and 69% patients were in Child-Pugh class A, 19% class B, 11% class C. For the mean intensity of green color AUROC=0.81, a cut-off value under 108.7 being diagnostic for HCC with a Sp=91.1%, Se=50%, PPV=92.1%, NPV=47.1%. Mean intensity of blue color proved to be an excellent diagnostic tool for HCC (AUROC=0.94); for a cut-off value greater than 128.9, Sp=92.2%, Se=78.9%, PPV=95.4%, NPV=68%. Independent predictive factors of HCC for a small nodule in cirrhotic patients were: blue color over 128.9 at sonoelastography and hypervascular appearance at Doppler US. US elastography is a promising method for the non-invasive diagnosis of early HCC. Blue color at elastography and hypervascular aspects are independent predictors of HCC.

Unbiased roughness measurements: the key to better etch performance

NASA Astrophysics Data System (ADS)

Liang, Andrew; Mack, Chris; Sirard, Stephen; Liang, Chen-wei; Yang, Liu; Jiang, Justin; Shamma, Nader; Wise, Rich; Yu, Jengyi; Hymes, Diane

2018-03-01

Edge placement error (EPE) has become an increasingly critical metric to enable Moore's Law scaling. Stochastic variations, as characterized for lines by line width roughness (LWR) and line edge roughness (LER), are dominant factors in EPE and known to increase with the introduction of EUV lithography. However, despite recommendations from ITRS, NIST, and SEMI standards, the industry has not agreed upon a methodology to quantify these properties. Thus, differing methodologies applied to the same image often result in different roughness measurements and conclusions. To standardize LWR and LER measurements, Fractilia has developed an unbiased measurement that uses a raw unfiltered line scan to subtract out image noise and distortions. By using Fractilia's inverse linescan model (FILM) to guide development, we will highlight the key influences of roughness metrology on plasma-based resist smoothing processes. Test wafers were deposited to represent a 5 nm node EUV logic stack. The patterning stack consists of a core Si target layer with spin-on carbon (SOC) as the hardmask and spin-on glass (SOG) as the cap. Next, these wafers were exposed through an ASML NXE 3350B EUV scanner with an advanced chemically amplified resist (CAR). Afterwards, these wafers were etched through a variety of plasma-based resist smoothing techniques using a Lam Kiyo conductor etch system. Dense line and space patterns on the etched samples were imaged through advanced Hitachi CDSEMs and the LER and LWR were measured through both Fractilia and an industry standard roughness measurement software. By employing Fractilia to guide plasma-based etch development, we demonstrate that Fractilia produces accurate roughness measurements on resist in contrast to an industry standard measurement software. These results highlight the importance of subtracting out SEM image noise to obtain quicker developmental cycle times and lower target layer roughness.

Investigation of hot cracking resistance of 2205 duplex steel

NASA Astrophysics Data System (ADS)

Adamiec, J.; Ścibisz, B.

2010-02-01

Austenitic duplex steel of the brand 2205 according to Avesta Sheffield is used for welded constructions (pipelines, tanks) in the petrol industry, chemical industry and food industry. It is important to know the range of high-temperature brittleness in designing welding technology for constructions made of this steel type. There is no data in literature concerning this issue. High-temperature brittleness tests using the simulator of heat flow device Gleeble 3800 were performed. The tests results allowed the evaluation of the characteristic temperatures in the brittleness temperature range during the joining of duplex steels, specifically the nil-strength temperature (NST) and nil-ductility temperatures (NDT) during heating, the strength and ductility recovery temperatures (DRT) during cooling, the Rfparameter (Rf = (Tliquidus - NDT)/NDT) describing the duplex steel inclination for hot cracking, and the brittleness temperature range (BTR). It has been stated that, for the examined steel, this range is wide and amounts to ca. 90 °C. The joining of duplex steels with the help of welding techniques creates a significant risk of hot cracks. After analysis of the DTA curves a liquidus temperature of TL = 1465 °C and a solidus temperature of TS = 1454 °C were observed. For NST a mean value was assumed, in which the cracks appeared for six samples; the temperature was 1381 °C. As the value of the NDT temperature 1367 °C was applied while for DRT the assumed temperature was 1375 °C. The microstructure of the fractures was observed using a Hitachi S-3400N scanning electron microscope (SEM). The analyses of the chemical composition were performed using an energy-dispersive X-ray spectrometer (EDS), Noran System Six of Thermo Fisher Scientific. Essential differences of fracture morphology type over the brittle temperature range were observed and described.

En bloc pancreaticoduodenectomy and right hemicolectomy for locally advanced right-sided colon cancer

PubMed Central

Kaneda, Yuji; Noda, Hiroshi; Endo, Yuhei; Kakizawa, Nao; Ichida, Kosuke; Watanabe, Fumiaki; Kato, Takaharu; Miyakura, Yasuyuki; Suzuki, Koichi; Rikiyama, Toshiki

2017-01-01

AIM To assess the usefulness of en bloc right hemicolectomy with pancreaticoduodenectomy (RHCPD) for locally advanced right-sided colon cancer (LARCC). METHODS We retrospectively reviewed the database of Saitama Medical Center, Jichi Medical University, between January 2009 and December 2016. During this time, 299 patients underwent radical right hemicolectomy for right-sided colon cancer. Among them, 5 underwent RHCPD for LARCC with tumor infiltration to adjacent organs. Preoperative computed tomography (CT) was routinely performed to evaluate local tumor infiltration into adjacent organs. During the operation, we evaluated the resectability and the amount of infiltration into the adjacent organs without dissecting the adherent organs from the cancer. When we confirmed that radical resection was feasible and could lead to R0 resection, we performed RHCPD. The clinical data were carefully reviewed, and the demographic variables, intraoperative data, and postoperative parameters were recorded. RESULTS The median age of the 5 patients who underwent RHCPD for LARCC was 70 years. The tumors were located in the ascending colon (three patients) and transverse colon (two patients). Preoperative CT revealed infiltration of the tumor into the duodenum in all patients, the pancreas in four patients, the superior mesenteric vein (SMV) in two patients, and tumor thrombosis in the SMV in one patient. We performed RHCPD plus SMV resection in three patients. Major postoperative complications occurred in 3 patients (60%) as pancreatic fistula (grade B and grade C, according to International Study Group on Pancreatic Fistula Definition) and delayed gastric empty. None of the patients died during their hospital stay. A histological examination confirmed malignant infiltration into the duodenum and/or pancreas in 4 patients (80%), and no patients showed any malignant infiltration into the SMV. Two patients were histologically confirmed to have tumor thrombosis in the SMV. All of the

Assessment of flood risk in Tokyo metropolitan area

NASA Astrophysics Data System (ADS)

Hirano, J.; Dairaku, K.

2013-12-01

Flood is one of the most significant natural hazards in Japan. The Tokyo metropolitan area has been affected by several large flood disasters. Therefore, investigating potential flood risk in Tokyo metropolitan area is important for development of adaptation strategy for future climate change. We aim to develop a method for evaluating flood risk in Tokyo Metropolitan area by considering effect of historical land use and land cover change, socio-economic change, and climatic change. Ministry of land, infrastructure, transport and tourism in Japan published 'Statistics of flood', which contains data for flood causes, number of damaged houses, area of wetted surface, and total amount of damage for each flood at small municipal level. By using these flood data, we estimated damage by inundation inside a levee for each prefecture based on a statistical method. On the basis of estimated damage, we developed flood risk curves in the Tokyo metropolitan area, representing relationship between damage and exceedance probability of flood for the period 1976-2008 for each prefecture. Based on the flood risk curve, we attempted evaluate potential flood risk in the Tokyo metropolitan area and clarify the cause for regional difference of flood risk. By analyzing flood risk curves, we found out regional differences of flood risk. We identified high flood risk in Tokyo and Saitama prefecture. On the other hand, flood risk was relatively low in Ibaraki and Chiba prefecture. We found that these regional differences of flood risk can be attributed to spatial distribution of entire property value and ratio of damaged housing units in each prefecture.We also attempted to evaluate influence of climate change on potential flood risk by considering variation of precipitation amount and precipitation intensity in the Tokyo metropolitan area. Results shows that we can evaluate potential impact of precipitation change on flood risk with high accuracy by using our methodology. Acknowledgments

SU-D-210-07: The Dependence On Acoustic Velocity of Medium On the Needle Template and Electronic Grid Alignment in Ultrasound QA for Prostate Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kapoor, P; Kapoor, R; Curran, B

Purpose: To analyze the impact on acoustic velocity (AV) of two different media (water and milk) using the needle template/electronic grid alignment test. Water, easily available, makes a good material to test the alignment of the template and grid although water’s AV (1498 m/s at 25°C) is significantly different from tissue (1540 m/s). Milk, with an AV much closer (1548 m/s) to prostate tissue, may be a good substitute for water in ultrasound quality assurance testing. Methods: Tests were performed using a Hitachi ultrasound unit with a mechanical arrangement designed to position needles parallel to the transducer. In this work,more » two materials – distilled water and homogenized whole milk (AVs of 1498 and 1548 m/s at 25°C) were used in a phantom to test ultrasound needle/grid alignment. The images were obtained with both materials and analyzed for their placement accuracy. Results: The needle template/electronic grid alignment tests showed displacement errors between measured and calculated values. The measurements showed displacements of 2.3mm (water) and 0.4mm (milk), and 1.6mm (water) and 0.3mm (milk) at depths of 7cm and 5cm respectively from true needle positions. The calculated results showed a displacement of 2.36 mm (water); 0.435mm (milk), and 1.66mm (water) and 0.31mm (milk) at a depth of 7cm and 5cm respectively. The displacements in the X and Y directions were also calculated. At depths of 7cm and 5cm, the (ΔX,ΔY) displacements in water were (0.829mm, 2.21mm) and (0.273mm, 1.634mm) and for milk were (0.15mm, 0.44mm) and (0.05mm, 0.302mm) respectively. Conclusion: The measured and calculated values were in good agreement for all tests. They show that milk provides superior results when performing needle template and electronic grid alignment tests for ultrasound units used in prostate brachytherapy.« less

Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses.

PubMed

Lorenz, Kathrine Osborn; Kakkassery, Joseph; Boree, Danielle; Pinto, David

2014-09-01

Limbal ring (also known as 'circle') contact lenses are becoming increasingly popular, especially in Asian markets because of their eye-enhancing effects. The pigment particles that give the eye-enhancing effects of these lenses can be found on the front or back surface of the contact lens or 'enclosed' within the lens matrix. The purpose of this research was to evaluate the pigment location and surface roughness of seven types of 'circle' contact lenses. Scanning electron microscopic (SEM) analysis was performed using a variable pressure Hitachi S3400N instrument to discern the placement of lens pigments. Atomic force microscopy (Dimension Icon AFM from Bruker Nano) was used to determine the surface roughness of the pigmented regions of the contact lenses. Atomic force microscopic analysis was performed in fluid phase under contact mode using a Sharp Nitride Lever probe (SNL-10) with a spring constant of 0.06 N/m. Root mean square (RMS) roughness values were analysed using a generalised linear mixed model with a log-normal distribution. Least square means and their corresponding 95% confidence intervals were estimated for each brand, location and pigment combination. SEM cross-sectional images at 500× and 2,000× magnification showed pigment on the surface of six of the seven lens types tested. The mean depth of pigment for 1-DAY ACUVUE DEFINE (1DAD) lenses was 8.1 μm below the surface of the lens, while the remaining lens types tested had pigment particles on the front or back surface. Results of the atomic force microscopic analysis indicated that 1DAD lenses had significantly lower root mean square roughness values in the pigmented area of the lens than the other lens types tested. SEM and AFM analysis revealed pigment on the surface of the lens for all types tested with the exception of 1DAD. Further research is required to determine if the difference in pigment location influences on-eye performance. © 2014 The Authors. Clinical and Experimental

[Multisite validation of CDT measurement by the %CDT TIA and the Tina Quant %CDT kits].

PubMed

Boehrer, J L; Cano, Y; Capolaghi, B; Desch, G; Dosbaa, I; Estepa, L; Hennache, B; Schellenberg, F

2007-01-01

The measurement of CDT (Carbohydrate Deficient Transferrin) is an essential biological tool in the diagnosis and follow-up of alcohol abuse. It is also employed as a marker of abstinence for the restitution of driving licences. However, the precision of measurement, and the between laboratory homogeneity of the results are still discussed. The ion exchange followed by immunodetermination of CDT is available in two products, the Tina Quant %CDT (Roche, Mannheim, Germany) and the %CDT TIA (Bio-Rad, Hercules, United States). This multicentre study was undertaken: 1) to evaluate the analytical characteristics of these kits and the homogeneity of the results from one laboratory to another, independently of the method used, 2) to validate the differences between the proposed normal values of both kits, 3) to study the possibility of using commercial control sera as external quality control. Four analytical systems were included in the study (Roche Modular/Hitachi 717, Beckman Coulter Immage and LX20, Dade Behring BNII). Determinations were carried out on pools of sera, commercial control sera, kit controls, and 30 serums of patients. These latter were also analyzed in capillary electrophoresis in order to establish correlations between the techniques. The calibrations were stable over one 2 weeks period. The repeatability of measurements spread out from 3,1% to 24,7%, for a mean value lower than 10%. The commercial control sera provided reliable results, with values adapted to a routine quality control use. The results of the Bio-Rad applications were lower by approximately 20% than those of the Roche application, which justifies the difference of the normal values (2,6% versus 3%), and an identical classification of the patients in at least 27 of the 30 samples. We conclude that the analytical quality of the compared techniques, even if it could be improved, is sufficient to guarantee a good reliability of the results. An external quality control could be proposed by

Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses

PubMed Central

Lorenz, Kathrine Osborn; Kakkassery, Joseph; Boree, Danielle; Pinto, David

2014-01-01

Background Limbal ring (also known as ‘circle’) contact lenses are becoming increasingly popular, especially in Asian markets because of their eye-enhancing effects. The pigment particles that give the eye-enhancing effects of these lenses can be found on the front or back surface of the contact lens or ‘enclosed’ within the lens matrix. The purpose of this research was to evaluate the pigment location and surface roughness of seven types of ‘circle’ contact lenses. Methods Scanning electron microscopic (SEM) analysis was performed using a variable pressure Hitachi S3400N instrument to discern the placement of lens pigments. Atomic force microscopy (Dimension Icon AFM from Bruker Nano) was used to determine the surface roughness of the pigmented regions of the contact lenses. Atomic force microscopic analysis was performed in fluid phase under contact mode using a Sharp Nitride Lever probe (SNL-10) with a spring constant of 0.06 N/m. Root mean square (RMS) roughness values were analysed using a generalised linear mixed model with a log-normal distribution. Least square means and their corresponding 95% confidence intervals were estimated for each brand, location and pigment combination. Results SEM cross-sectional images at 500× and 2,000× magnification showed pigment on the surface of six of the seven lens types tested. The mean depth of pigment for 1-DAY ACUVUE DEFINE (1DAD) lenses was 8.1 μm below the surface of the lens, while the remaining lens types tested had pigment particles on the front or back surface. Results of the atomic force microscopic analysis indicated that 1DAD lenses had significantly lower root mean square roughness values in the pigmented area of the lens than the other lens types tested. Conclusions SEM and AFM analysis revealed pigment on the surface of the lens for all types tested with the exception of 1DAD. Further research is required to determine if the difference in pigment location influences on-eye performance. PMID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kanehira, T; Sutherland, K; Matsuura, T

Purpose: To evaluate density inhomogeneities which can effect dose distributions for real-time image gated spot-scanning proton therapy (RGPT), a dose calculation system, using treatment planning system VQA (Hitachi Ltd., Tokyo) spot position data, was developed based on Geant4. Methods: A Geant4 application was developed to simulate spot-scanned proton beams at Hokkaido University Hospital. A CT scan (0.98 × 0.98 × 1.25 mm) was performed for prostate cancer treatment with three or four inserted gold markers (diameter 1.5 mm, volume 1.77 mm3) in or near the target tumor. The CT data was read into VQA. A spot scanning plan was generatedmore » and exported to text files, specifying the beam energy and position of each spot. The text files were converted and read into our Geant4-based software. The spot position was converted into steering magnet field strength (in Tesla) for our beam nozzle. Individual protons were tracked from the vacuum chamber, through the helium chamber, steering magnets, dose monitors, etc., in a straight, horizontal line. The patient CT data was converted into materials with variable density and placed in a parametrized volume at the isocenter. Gold fiducial markers were represented in the CT data by two adjacent voxels (volume 2.38 mm3). 600,000 proton histories were tracked for each target spot. As one beam contained about 1,000 spots, approximately 600 million histories were recorded for each beam on a blade server. Two plans were considered: two beam horizontal opposed (90 and 270 degree) and three beam (0, 90 and 270 degree). Results: We are able to convert spot scanning plans from VQA and simulate them with our Geant4-based code. Our system can be used to evaluate the effect of dose reduction caused by gold markers used for RGPT. Conclusion: Our Geant4 application is able to calculate dose distributions for spot scanned proton therapy.« less

Interference studies with two hospital-grade and two home-grade glucose meters.

PubMed

Lyon, Martha E; Baskin, Leland B; Braakman, Sandy; Presti, Steven; Dubois, Jeffrey; Shirey, Terry

2009-10-01

Interference studies of four glucose meters (Nova Biomedical [Waltham, MA] StatStrip [hospital grade], Roche Diagnostics [Indianapolis, IN] Accu-Chek Aviva [home grade], Abbott Diabetes Care [Alameda, CA] Precision FreeStyle Freedom [home grade], and LifeScan [Milpitas, CA] SureStep Flexx [hospital grade]) were evaluated and compared to the clinical laboratory plasma hexokinase reference method (Roche Hitachi 912 chemistry analyzer). These meters were chosen to reflect the continuum of care from hospital to home grade meters commonly seen in North America. Within-run precision was determined using a freshly prepared whole blood sample spiked with concentrated glucose to give three glucose concentrations. Day-to-day precision was evaluated using aqueous control materials supplied by each vendor. Common interferences, including hematocrit, maltose, and ascorbate, were tested alone and in combination with one another on each of the four glucose testing devices at three blood glucose concentrations. Within-run precision for all glucose meters was <5% except for the FreeStyle (up to 7.6%). Between-day precision was <6% for all glucose meters. Ascorbate caused differences (percentage change from a sample without added interfering substances) of >5% with pyrroloquinolinequinone (PQQ)-glucose dehydrogenase-based technologies (Aviva and Freestyle) and the glucose oxidase-based Flexx meter. Maltose strongly affected the PQQ-glucose dehydrogenase-based meter systems. When combinations of interferences (ascorbate, maltose, and hematocrit mixtures) were tested, the extent of the interference was up to 193% (Aviva), 179% (FreeStyle), 25.1% (Flexx), and 5.9% (StatStrip). The interference was most pronounced at low glucose (3.9-4.4 mmol/L). All evaluated glucose meter systems demonstrated varying degrees of interference by hematocrit, ascorbate, and maltose mixtures. PQQ-glucose dehydrogenase-based technologies showed greater susceptibility than glucose oxidase-based systems

LiF TLD-100 as a dosimeter in high energy proton beam therapy--can it yield accurate results?

PubMed

Zullo, John R; Kudchadker, Rajat J; Zhu, X Ronald; Sahoo, Narayan; Gillin, Michael T

2010-01-01

In the region of high-dose gradients at the end of the proton range, the stopping power ratio of the protons undergoes significant changes, allowing for a broad spectrum of proton energies to be deposited within a relatively small volume. Because of the potential linear energy transfer dependence of LiF TLD-100 (thermolumescent dosimeter), dose measurements made in the distal fall-off region of a proton beam may be less accurate than those made in regions of low-dose gradients. The purpose of this study is to determine the accuracy and precision of dose measured using TLD-100 for a pristine Bragg peak, particularly in the distal fall-off region. All measurements were made along the central axis of an unmodulated 200-MeV proton beam from a Probeat passive beam-scattering proton accelerator (Hitachi, Ltd., Tokyo, Japan) at varying depths along the Bragg peak. Measurements were made using TLD-100 powder flat packs, placed in a virtual water slab phantom. The measurements were repeated using a parallel plate ionization chamber. The dose measurements using TLD-100 in a proton beam were accurate to within +/-5.0% of the expected dose, previously seen in our past photon and electron measurements. The ionization chamber and the TLD relative dose measurements agreed well with each other. Absolute dose measurements using TLD agreed with ionization chamber measurements to within +/- 3.0 cGy, for an exposure of 100 cGy. In our study, the differences in the dose measured by the ionization chamber and those measured by TLD-100 were minimal, indicating that the accuracy and precision of measurements made in the distal fall-off region of a pristine Bragg peak is within the expected range. Thus, the rapid change in stopping power ratios at the end of the range should not affect such measurements, and TLD-100 may be used with confidence as an in vivo dosimeter for proton beam therapy. Copyright 2010 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights

LiF TLD-100 as a Dosimeter in High Energy Proton Beam Therapy-Can It Yield Accurate Results?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zullo, John R.; Kudchadker, Rajat J.; Zhu, X. Ronald

In the region of high-dose gradients at the end of the proton range, the stopping power ratio of the protons undergoes significant changes, allowing for a broad spectrum of proton energies to be deposited within a relatively small volume. Because of the potential linear energy transfer dependence of LiF TLD-100 (thermolumescent dosimeter), dose measurements made in the distal fall-off region of a proton beam may be less accurate than those made in regions of low-dose gradients. The purpose of this study is to determine the accuracy and precision of dose measured using TLD-100 for a pristine Bragg peak, particularly inmore » the distal fall-off region. All measurements were made along the central axis of an unmodulated 200-MeV proton beam from a Probeat passive beam-scattering proton accelerator (Hitachi, Ltd., Tokyo, Japan) at varying depths along the Bragg peak. Measurements were made using TLD-100 powder flat packs, placed in a virtual water slab phantom. The measurements were repeated using a parallel plate ionization chamber. The dose measurements using TLD-100 in a proton beam were accurate to within {+-}5.0% of the expected dose, previously seen in our past photon and electron measurements. The ionization chamber and the TLD relative dose measurements agreed well with each other. Absolute dose measurements using TLD agreed with ionization chamber measurements to within {+-} 3.0 cGy, for an exposure of 100 cGy. In our study, the differences in the dose measured by the ionization chamber and those measured by TLD-100 were minimal, indicating that the accuracy and precision of measurements made in the distal fall-off region of a pristine Bragg peak is within the expected range. Thus, the rapid change in stopping power ratios at the end of the range should not affect such measurements, and TLD-100 may be used with confidence as an in vivo dosimeter for proton beam therapy.« less

Copper Decoration of Carbon Nanotubes and High Resolution Electron Microscopy

NASA Astrophysics Data System (ADS)

Probst, Camille

A new process of decorating carbon nanotubes with copper was developed for the fabrication of nanocomposite aluminum-nanotubes. The process consists of three stages: oxidation, activation and electroless copper plating on the nanotubes. The oxidation step was required to create chemical function on the nanotubes, essential for the activation step. Then, catalytic nanoparticles of tin-palladium were deposited on the tubes. Finally, during the electroless copper plating, copper particles with a size between 20 and 60 nm were uniformly deposited on the nanotubes surface. The reproducibility of the process was shown by using another type of carbon nanotube. The fabrication of nanocomposites aluminum-nanotubes was tested by aluminum vacuum infiltration. Although the infiltration of carbon nanotubes did not produce the expected results, an interesting electron microscopy sample was discovered during the process development: the activated carbon nanotubes. Secondly, scanning transmitted electron microscopy (STEM) imaging in SEM was analysed. The images were obtained with a new detector on the field emission scanning electron microscope (Hitachi S-4700). Various parameters were analysed with the use of two different samples: the activated carbon nanotubes (previously obtained) and gold-palladium nanodeposits. Influences of working distance, accelerating voltage or sample used on the spatial resolution of images obtained with SMART (Scanning Microscope Assessment and Resolution Testing) were analysed. An optimum working distance for the best spatial resolution related to the sample analysed was found for the imaging in STEM mode. Finally, relation between probe size and spatial resolution of backscattered electrons (BSE) images was studied. An image synthesis method was developed to generate the BSE images from backscattered electrons coefficients obtained with CASINO software. Spatial resolution of images was determined using SMART. The analysis shown that using a probe

Spin-Valve and Spin-Tunneling Devices: Read Heads, MRAMs, Field Sensors

NASA Astrophysics Data System (ADS)

Freitas, P. P.

Hard disk magnetic data storage is increasing at a steady state in terms of units sold, with 144 million drives sold in 1998 (107 million for desktops, 18 million for portables, and 19 million for enterprise drives), corresponding to a total business of 34 billion US [1]. The growing need for storage coming from new PC operating systems, INTERNET applications, and a foreseen explosion of applications connected to consumer electronics (digital TV, video, digital cameras, GPS systems, etc.), keep the magnetics community actively looking for new solutions, concerning media, heads, tribology, and system electronics. Current state of the art disk drives (January 2000), using dual inductive-write, magnetoresistive-read (MR) integrated heads reach areal densities of 15 to 23 bit/μm2, capable of putting a full 20 GB in one platter (a 2 hour film occupies 10 GB). Densities beyond 80 bit/μm2 have already been demonstrated in the laboratory (Fujitsu 87 bit/μm2-Intermag 2000, Hitachi 81 bit/μm2, Read-Rite 78 bit/μ m2, Seagate 70 bit/μ m2 - all the last three demos done in the first 6 months of 2000, with IBM having demonstrated 56 bit/μ m2 already at the end of 1999). At densities near 60 bit/μm2, the linear bit size is sim 43 nm, and the width of the written tracks is sim 0.23 μm. Areal density in commercial drives is increasing steadily at a rate of nearly 100% per year [1], and consumer products above 60 bit/μm2 are expected by 2002. These remarkable achievements are only possible by a stream of technological innovations, in media [2], write heads [3], read heads [4], and system electronics [5]. In this chapter, recent advances on spin valve materials and spin valve sensor architectures, low resistance tunnel junctions and tunnel junction head architectures will be addressed.

A Proton Beam Therapy System Dedicated to Spot-Scanning Increases Accuracy with Moving Tumors by Real-Time Imaging and Gating and Reduces Equipment Size

PubMed Central

Shimizu, Shinichi; Miyamoto, Naoki; Matsuura, Taeko; Fujii, Yusuke; Umezawa, Masumi; Umegaki, Kikuo; Hiramoto, Kazuo; Shirato, Hiroki

2014-01-01

Purpose A proton beam therapy (PBT) system has been designed which dedicates to spot-scanning and has a gating function employing the fluoroscopy-based real-time-imaging of internal fiducial markers near tumors. The dose distribution and treatment time of the newly designed real-time-image gated, spot-scanning proton beam therapy (RGPT) were compared with free-breathing spot-scanning proton beam therapy (FBPT) in a simulation. Materials and Methods In-house simulation tools and treatment planning system VQA (Hitachi, Ltd., Japan) were used for estimating the dose distribution and treatment time. Simulations were performed for 48 motion parameters (including 8 respiratory patterns and 6 initial breathing timings) on CT data from two patients, A and B, with hepatocellular carcinoma and with clinical target volumes 14.6 cc and 63.1 cc. The respiratory patterns were derived from the actual trajectory of internal fiducial markers taken in X-ray real-time tumor-tracking radiotherapy (RTRT). Results With FBPT, 9/48 motion parameters achieved the criteria of successful delivery for patient A and 0/48 for B. With RGPT 48/48 and 42/48 achieved the criteria. Compared with FBPT, the mean liver dose was smaller with RGPT with statistical significance (p<0.001); it decreased from 27% to 13% and 28% to 23% of the prescribed doses for patients A and B, respectively. The relative lengthening of treatment time to administer 3 Gy (RBE) was estimated to be 1.22 (RGPT/FBPT: 138 s/113 s) and 1.72 (207 s/120 s) for patients A and B, respectively. Conclusions This simulation study demonstrated that the RGPT was able to improve the dose distribution markedly for moving tumors without very large treatment time extension. The proton beam therapy system dedicated to spot-scanning with a gating function for real-time imaging increases accuracy with moving tumors and reduces the physical size, and subsequently the cost of the equipment as well as of the building housing the equipment. PMID

Dysfunction in gastric myoelectric and motor activity in Helicobacter pylori positive gastritis patients with non-ulcer dyspesia.

PubMed

Thor, P; Lorens, K; Tabor, S; Herman, R; Konturek, J W; Konturek, S J

1996-09-01

Helicobacter pylori (Hp) infection has been shown to affect gastric acid secretion and the somatostatin-gastrin ratio but its effects on gastric motility have not been evaluated. This study was carried out in 12 patients (10 males and 2 females, mean age 33 +/- 6 yrs) who underwent endoscopy and Campylobacter-like Organism (CLO)-test. All patients were found initially to be Hp positive according to CLO-test. Gastric emptying was evaluated by measuring antral diameter with ultrasonography (Hitachi EUB 240) in fasted and fed patients. Electrogastrography (EGG) with antral manometry were done 5 h before and 4 h after a meal before the therapy and one month after the eradication with triple therapy (lanzoprazole 30 mg daily- 2 x 250 mg clarithromycin 500 mg t.i.d.-3 x 500 mg and metronidazole 500 mg b.i.d.-2 x 500 mg). In Hp positive patients before the triple therapy the mean fasted antral diameter was 4.3 cm2, initial EGG showed significant dysrhythmia of electrical control activity (ECA) with tachygastria up to 25% of recording time in 9 of 12 Hp positive patients without normal increase of the power of signal in any of tested subjects. In 7 Hp positive fasted antral manometry failed to exhibit gastric phases III of the migrating motor complex (MMC). Hp eradication was accomplished in 10 of 12 examined patients and this was followed by a decrease in tachygastria to 3 cpm rhythm with an increase of the ECA power after meal. Phase III of MMC was observed again in 7 Hp negative patients with a decrease of fasted antral diameter (p < 0.05). Fasted and fed antral motility pattern increased after eradication. Two patients remained Hp positive after standard therapy. We conclude that most symptomatic non ulcer dyspeptic Hp positive patients show changes in ECA and antral hypomotility that are associated with Hp infections.

TU-FG-BRB-08: Challenges, Limitations and Future Outlook Towards Clinical Translation of Proton Acoustic Range Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yousefi, S; Ahmad, M; Xiang, L

Purpose: To report our investigations of proton acoustic imaging, including computer simulations and preliminary experimental studies at clinical facilities. The ultimate achievable accuracy, sensitivity and clinical translation challenges are discussed. Methods: The acoustic pulse due to pressure rise was estimated using finite element model. Since the ionoacoustic pulse is highly dependent on the proton pulse width and energy, multiple pulse widths were studied. Based on the received signal spectrum at piezoelectric ultrasound transducer with consideration of random thermal noise, maximum spatial resolution of the proton-acoustic imaging modality was calculated. The simulation studies defined the design specifications of the system tomore » detect proton acoustic signal from Hitachi and Mevion clinical machines. A 500 KHz hydrophone with 100 dB amplification was set up in a water tank placed in front of the proton nozzle A 40 MHz data acquisition was synchronized by a trigger signal provided by the machine. Results: Given 30–800 mGy dose per pulse at the Bragg peak, the minimum number of protons detectable by the proton acoustic technique was on the order of 10×10^6 per pulse. The broader pulse widths produce signal with lower acoustic frequencies, with 10 µs pulses producing signals with frequency less than 100 kHz. As the proton beam pulse width increases, a higher dose rate is required to measure the acoustic signal. Conclusion: We have established the minimal detection limit for protonacoustic range validation for a variety of pulse parameters. Our study indicated practical proton-acoustic range verification can be feasible with a pulse shorter than 10 µs, 5×10^6 protons/pulse, 50 nA beam current and a highly sensitive ultrasonic transducer. The translational challenges into current clinical machines include proper magnetic shielding of the measurement equipment, providing a clean trigger signal from the proton machine, providing a shorter proton beam

Compositional Characteristics of Dissolved Organic Matter released from the sediment of Han river in Korea.

NASA Astrophysics Data System (ADS)

Oh, H.; Choi, J. H.

2017-12-01

The dissolved organic matter (DOM) has variable characteristics depending on the sources. The DOM of a river is affected by rain water, windborne material, surface and groundwater flow, and sediments. In particular, sediments are sources and sinks of nutrients and pollutants in aquatic ecosystems by supplying large amounts of organic matter. The DOM which absorbs ultraviolet and visible light is called colored dissolved organic matter (CDOM). CDOM is responsible for the optical properties of natural waters in several biogeochemical and photochemical processes and absorbs UV-A (315-400 nm) and UV-B (280-315), which are harmful to aquatic ecosystems (Helms et al., 2008). In this study, we investigated the quantity and quality of DOM and CDOM released from the sediments of Han river which was impacted by anthropogenic activities and hydrologic alternation of 4 Major River Restoration Project. The target area of this study is Gangchenbo (GC), Yeojubo (YJ), and Ipobo(IP) of the Han River, Korea. Sediments and water samples were taken on July and August of 2016 and were incubated at 20° up to 7 days. Absorbance was measured with UV-visible spectrophotometer (Libra S32 PC, Biochrom). Fluorescence intensity determined with Fluorescence EEMs (F-7000, Hitachi). Absorbance and fluorescence intensity were used to calculate Specific Ultraviolet Absorbance (SUVA254), Humification index (HIX), Biological index (BIX), Spectral slope (SR) and component analysis. The DOC concentration increased after 3 days of incubation. According to the SUVA254 analysis, the microbial activity is highest in the initial overlying water of IP. HIX have range of 1.35-4.08, and decrease poly aromatic structures of organic matter during incubation. From the results of the BIX, autochthonous organic matter was released from the sediments. In all sites, Humic-like DOM, Microbial humic-like DOM and Protein-like DOM increased significantly between Day 0 and 3(except Humic-like, Microbial humic-like DOM in

Elevation of small, dense low density lipoprotein cholesterol-a possible antecedent of atherogenic lipoprotein phenotype in type 2 diabetes patients in Jos, North-Central Nigeria.

PubMed

Inaku, Kenneth O; Ogunkeye, Obasola O; Abbiyesuku, Fayeofori M; Chuhwak, Evelyn K; Isichei, Christian O; Imoh, Lucius C; Amadu, Noel O; Abu, Alexander O

2017-01-01

The global prevalence of type 2 diabetes is increasing. Dyslipidaemia is a known complication of diabetes mellitus manifesting frequently as cardiovascular diseases and stoke. Elevation of small, dense low density lipoprotein has been recognised as a component of the atherogenic lipoprotein phenotype associated with cardiovascular complications. We speculate that the elevation of this lipoprotein particle may be the antecedent of the atherogenic lipoprotein phenotype. This study therefore aims to determine the pattern of dyslipidaemia among diabetes mellitus patients in Jos, North-Central Nigeria. One hundred and seventy-six patients with type 2 diabetes and 154 age-matched controls were studied. The patients with diabetes were regular clinic attenders and had stable glycaemic control. None were on lipid-lowering therapy. Anthropometric indices, blood pressure, and lipids (including total cholesterol, high density lipoprotein cholesterol, and triglyceride) were measured by chemical methods using the Hitachi 902 analyzer. Low density lipoprotein cholesterol was calculated using the Friedewald's equation. Small, dense low density lipoprotein cholesterol, -sdLDL-C was measured using the precipitation method by Hirano et al. Means of the different groups were compared using EPI Info and a P -value of <0.05 was accepted as significant difference. Total cholesterol, low density lipoprotein cholesterol, triglyceride and small, dense lipoprotein cholesterol were all significantly higher in diabetes patients than controls except high density lipoprotein cholesterol. The percentage of LDL-C as sdLDL-C among the diabetes versus control group was 45% ± 17.79 v 32.0% ± 15.93. Serum sdLDL-C concentration was determined to be 1.45 ± 0.64 among diabetes patients and 0.8 ± 0.54 among control subjects. 75% of diabetes patients had hypertension and were taking blood pressure lowering medications. The classical atherogenic lipoprotein phenotype was not demonstrated

SU-F-T-189: Dosimetric Comparison of Spot-Scanning Proton Therapy Techniques for Liver Tumors Close to the Skin Surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takao, S; Matsuzaki, Y; Matsuura, T

Purpose: Spot-scanning technique has been utilized to achieve conformal dose distribution to large and complicated tumors. This technique generally does not require patient-specific devices such as aperture and compensator. The commercially available spot-scanning proton therapy (SSPT) systems, however, cannot deliver proton beams to the region shallower than 4 g/cm2. Therefore some range compensation device is required to treat superficial tumors with SSPT. This study shows dosimetric comparison of the following treatment techniques: (i) with a tabletop bolus, (ii) with a nozzle-mounted applicator, and (iii) without any devices and using intensity-modulated proton therapy (IMPT) technique. Methods: The applicator composed of amore » combination of a mini-ridge filter and a range shifter has been manufactured by Hitachi, Ltd., and the tabletop bolus was made by .decimal, Inc. Both devices have been clinically implemented in our facility. Three patients with liver tumors close to the skin surface were examined in this study. Each treatment plan was optimized so that the prescription dose of 76 Gy(RBE) or 66 Gy(RBE) would be delivered to 99% of the clinical target volume in 20 fractions. Three beams were used for tabletop bolus plan and IMPT plan, whereas two beams were used in the applicator plan because the gantry angle available was limited due to potential collision to patient and couch. The normal liver, colon, and skin were considered as organs at risk (OARs). Results: The target heterogeneity index (HI = D{sub 5}/D{sub 95}) was 1.03 on average in each planning technique. The mean dose to the normal liver was considerably less than 20 Gy(RBE) in all cases. The dose to the skin could be reduced by 20 Gy(RBE) on average in the IMPT plan compared to the applicator plan. Conclusion: It has been confirmed that all treatment techniques met the dosimetric criteria for the OARs and could be implemented clinically.« less

Attempt to assess the infiltration of enamel made with experimental preparation using a scanning electron microscope.

PubMed

Skucha-Nowak, Małgorzata

2015-01-01

The resin infiltration technique, a minimally invasive method, involves the saturation, strengthening, and stabilization of demineralized enamel by a mixture of polymer resins without the need to use rotary tools or the risk of losing healthy tooth structures. To design and synthesize an experimental infiltrant with potential bacteriostatic properties.To compare the depth of infiltration of the designed experimental preparation with the infiltrant available in the market using a scanning electron microscope. Composition of the experimental infiltrant was established after analysis of 1H NMR spectra of the commercially available compounds that can penetrate pores of demineralized enamel. As the infiltrant should have bacteriostatic features by definition, an addition of 1% of monomer containing metronidazole was made. Thirty extracted human teeth were soaked in an acidic solution, which was to provide appropriate conditions for demineralization of enamel. Afterward, each tooth was divided along the coronal-root axis into two zones. One zone had experimental preparation applied to it (the test group), while the other had commercially available Icon (the control group). The teeth were dissected along the long axis and described above underwent initial observation with use of a Hitachi S-4200 scanning electron microscope. It was found that all samples contained only oxygen and carbon, regardless of the concentration of additions introduced into them. The occurrence of carbon is partially because it is a component of the preparation in question and partially because of sputtering of the sample with it. Hydrogen is also a component of the preparation, as a result of its phase composition; however, it cannot be detected by the EDS method. SEM, in combination with X-ray microanalysis, does not allow one to explicitly assess the depth of penetration of infiltration preparations into enamel.In order to assess the depth of penetration of infiltration preparations with use of

SU-E-T-146: Effects of Uncertainties of Radiation Sensitivity of Biological Modelling for Treatment Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oita, M; Department of Life System, Institute of Technology and Science, Graduate School, The Tokushima University; Uto, Y

Purpose: The aim of this study was to evaluate the distribution of uncertainty of cell survival by radiation, and assesses the usefulness of stochastic biological model applying for gaussian distribution. Methods: For single cell experiments, exponentially growing cells were harvested from the standard cell culture dishes by trypsinization, and suspended in test tubes containing 1 ml of MEM(2x10{sup 6} cells/ml). The hypoxic cultures were treated with 95% N{sub 2}−5% CO{sub 2} gas for 30 minutes. In vitro radiosensitization was also measured in EMT6/KU single cells to add radiosensitizer under hypoxic conditions. X-ray irradiation was carried out by using an Xraymore » unit (Hitachi X-ray unit, model MBR-1505R3) with 0.5 mm Al/1.0 mm Cu filter, 150 kV, 4 Gy/min). In vitro assay, cells on the dish were irradiated with 1 Gy to 24 Gy, respectively. After irradiation, colony formation assays were performed. Variations of biological parameters were investigated at standard cell culture(n=16), hypoxic cell culture(n=45) and hypoxic cell culture(n=21) with radiosensitizers, respectively. The data were obtained by separate schedule to take account for the variation of radiation sensitivity of cell cycle. Results: At standard cell culture, hypoxic cell culture and hypoxic cell culture with radiosensitizers, median and standard deviation of alpha/beta ratio were 37.1±73.4 Gy, 9.8±23.7 Gy, 20.7±21.9 Gy, respectively. Average and standard deviation of D{sub 50} were 2.5±2.5 Gy, 6.1±2.2 Gy, 3.6±1.3 Gy, respectively. Conclusion: In this study, we have challenged to apply these uncertainties of parameters for the biological model. The variation of alpha values, beta values, D{sub 50} as well as cell culture might have highly affected by probability of cell death. Further research is in progress for precise prediction of the cell death as well as tumor control probability for treatment planning.« less

Determining in-situ thermal conductivity of coarse textured materials through numerical analysis of thermal

NASA Astrophysics Data System (ADS)

Saito, H.; Hamamoto, S.; Moldrup, P.; Komatsu, T.

2013-12-01

Ground source heat pump (GSHP) systems use ground or groundwater as a heat/cooling source, typically by circulating anti-freezing solution inside a vertically installed closed-loop tube known as a U-tube to transfer heat to/from the ground. Since GSHP systems are based on renewable energy and can achieve much higher coefficient of performance (COP) than conventional air source heat pump systems, use of GSHP systems has been rapidly increasing worldwide. However, environmental impacts by GSHP systems including thermal effects on subsurface physical-chemical and microbiological properties have not been fully investigated. To rigorously assess GSHP impact on the subsurface environment, ground thermal properties including thermal conductivity and heat capacity need to be accurately characterized. Ground thermal properties were investigated at two experimental sites at Tokyo University of Agriculture and Technology (TAT) and Saitama University (SA), both located in the Kanto area of Japan. Thermal properties were evaluated both by thermal probe measurements on boring core samples and by performing in-situ Thermal Response Tests (TRT) in 50-80 m deep U-tubes. At both TAT and SU sites, heat-pulse probe measurements gave unrealistic low thermal conductivities for coarse textured materials (dominated by particles > 75 micrometers). Such underestimation can be partly due to poor contact between probe and porous material and partly to markedly decreasing sample water content during drilling, carrying, and storing sandy/gravelly samples. A more reliable approach for estimating in-situ thermal conductivity of coarse textured materials is therefore needed, and may be based on the commonly used TRT test. However, analyses of TRT data is typically based on Kelvin's line source model and provides an average (effective) thermal property for the whole soil profile around the U-tube but not for each geological layer. The main objective of this study was therefore to develop a method

Release of cobalt and chromium ions into the serum following implantation of the metal-on-metal Maverick-type artificial lumbar disc (Medtronic Sofamor Danek).

PubMed

Zeh, Alexander; Planert, Michael; Siegert, Gabriele; Lattke, Peter; Held, Andreas; Hein, Werner

2007-02-01

Cross-sectional study of 10 patients to measure the serum levels of cobalt and chromium after TDA. To investigate the release of cobalt and chromium ions into the serum following implantation of the metal-on-metal Maverick-type artificial lumbar disc. In total hip endoprosthetics and consequently for TDA (total disc arthroplasty), metal-on-metal combinations are used with the aim of reducing wear debris. In metal-on-metal TDA the release of metal ions has until now been secondary to the main discussion. We investigated the serum cobalt and chromium concentration following implantation of 15 Maverick TDAs (monosegmental L5-S1, n = 5; bisegmental L4-L5 and L5-S1, n = 5; average age, 36.5 years). Five healthy subjects (no metal implants) acted as a control group. The measurements of the metals were carried out using the HITACHI Z-8200 AAS polarized Zeeman atomic absorption spectrometer after an average of 14.8 months. The concentrations of cobalt and chromium ions in the serum amounted on average to 4.75 microg/L (SD, 2.71) for cobalt and 1.10 microg/L (SD, 1.24) for chromium. Compared with control group, both the chromium and cobalt levels in the serum showed significant increases (Mann-Whitney U test, P = 0.0120). At follow-up,the Oswestry Disability Score was on average significantly decreased by 24.4 points (L5-S1) (t test, P < 0.05) and by 26.8 points (L4-S1) (t test, P < 0.05). The improved clinical situation is also represented by a significant decrease of the Visual Analog Pain Scale of 42.2 points after the follow-up (t test, P < 0.05). Significant systemic release of Cr/Co was proven in the serum compared with the control group. The concentrations of Cr/Co measured in the serum are similar in terms of their level to the values measured in THA metal-on-metal combinations or exceed these values given in the literature. Long-term implication of this metal exposure is unknown and should be studied further.

WE-D-17A-03: Improvement of Accuracy of Spot-Scanning Proton Beam Delivery for Liver Tumor by Real-Time Tumor-Monitoring and Gating System: A Simulation Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuura, T; Shimizu, S; Miyamoto, N

2014-06-15

Purpose: To improve the accuracy of spot-scanning proton beam delivery for target in motion, a real-time tumor-monitoring and gating system using fluoroscopy images was developed. This study investigates the efficacy of this method for treatment of liver tumors using simulation. Methods: Three-dimensional position of a fiducial marker inserted close to the tumor is calculated in real time and proton beam is gated according to the marker's distance from the planned position (Shirato, 2012). The efficient beam delivery is realized even for the irregular and sporadic motion signals, by employing the multiple-gated irradiations per operation cycle (Umezawa, 2012). For each ofmore » two breath-hold CTs (CTV=14.6cc, 63.1cc), dose distributions were calculated with internal margins corresponding to freebreathing (FB) and real-time gating (RG) with a 2-mm gating window. We applied 8 trajectories of liver tumor recorded during the treatment of RTRT in X-ray therapy and 6 initial timings. Dmax/Dmin in CTV, mean liver dose (MLD), and irradiation time to administer 3 Gy (RBE) dose were estimated assuming rigid motion of targets by using in-house simulation tools and VQA treatment planning system (Hitachi, Ltd., Tokyo). Results: Dmax/Dmin was degraded by less than 5% compared to the prescribed dose with all motion parameters for smaller CTV and less than 7% for larger CTV with one exception. Irradiation time showed only a modest increase if RG was used instead of FB; the average value over motion parameters was 113 (FB) and 138 s (RG) for smaller CTV and 120 (FB) and 207 s (RG) for larger CTV. In RG, it was within 5 min for all but one trajectory. MLD was markedly decreased by 14% and 5–6% for smaller and larger CTVs respectively, if RG was applied. Conclusions: Spot-scanning proton beam was shown to be delivered successfully to liver tumor without much lengthening of treatment time. This research was supported by the Cabinet Office, Government of Japan and the Japan

Willingness to Pay for Elderly Telecare Service Using the Internet and Digital Terrestrial Broadcasting

PubMed Central

Kaga, Satoshi; Suzuki, Teppei

2017-01-01

Background In Japan over the past few years, more attention has been focused on unnoticed solitary death in the context of an aging society and the trend toward nuclear family. A number of institutions and companies have implemented a prevention measure with digital terrestrial broadcasting telecare services for the elderly: Hokkaido University; TV-Asahi Corporation; Hitachi, Ltd; Iwamizawa City; Hokkaido Television Broadcasting Co, Ltd; and Hamanasu Information Co, Ltd. Although this system is provided free of charge as a demonstration test, determining the appropriate price for the service is required for its sustainable operation. Objective The aim of this study was to quantify individual willingness to pay (WTP) so as to test the tenability of digital terrestrial broadcasting service for elderly telecare. Methods We used the contingent valuation method (CVM) to estimate the WTP for this service among 305 citizens (valid response rate 76.0%) living in Japan. A questionnaire survey was conducted for people aged 18 to 100 years according to Japanese age distribution from September 2016. To elicit WTP, we adopted a double-bound dichotomous choice method to ask the respondents whether they agree or disagree with the price we offered. Results The median WTP for this service’s monthly fee is estimated to be 431 JPY (approximately US $3.7). The finding suggests that gender (0.66, P=.01), health consciousness (1.08, P=.01), willingness to use (2.38, P<.001), and seeing others less than once a week (1.00, P=.06) made a positive effect on WTP. Conclusions We conclude that reliable WTP was elicited by CVM based on an Internet survey. Calculated median WTP for digital terrestrial broadcasting service for elderly telecare was 431 JPY (approximately US $3.7). In the analysis of factors that affect WTP, constant factors, log-bid, health consciousness, gender, see others less than one time for week, and willingness to use made positive effect to probability of acceptance. In

3D Micro-topography of Transferred Laboratory and Natural Ice Crystal Surfaces Imaged by Cryo and Environmental Scanning Electron Microscopy

NASA Astrophysics Data System (ADS)

Magee, N. B.; Boaggio, K.; Bancroft, L.; Bandamede, M.

2015-12-01

Recent work has highlighted micro-scale roughness on the surfaces of ice crystals grown and imaged in-situ within the chambers of environmental scanning electron microscopes (ESEM). These observations appear to align with theoretical and satellite observations that suggest a prevalence of rough ice in cirrus clouds. However, the atmospheric application of the lab observations are indeterminate because the observations have been based only on crystals grown on substrates and in pure-water vapor environments. In this work, we present details and results from the development of a transfer technique which allows natural and lab-grown ice and snow crystals to be captured, preserved, and transferred into the ESEM for 3D imaging. Ice crystals were gathered from 1) natural snow, 2) a balloon-borne cirrus particle capture device, and 3) lab-grown ice crystals from a diffusion chamber. Ice crystals were captured in a pre-conditioned small-volume (~1 cm3) cryo-containment cell. The cell was then sealed closed and transferred to a specially-designed cryogenic dewer (filled with liquid nitrogen or crushed dry ice) for transport to a new Hitachi Field Emission, Variable Pressure SEM (SU-5000). The cryo-cell was then removed from the dewer and quickly placed onto the pre-conditioned cryo transfer stage attached to the ESEM (Quorum 3010T). Quantitative 3D topographical digital elevation models of ice surfaces are reported from SEM for the first time, including a variety of objective measures of statistical surface roughness. The surfaces of the transported crystals clearly exhibit signatures of mesoscopic roughening that are similar to examples of roughness seen in ESEM-grown crystals. For most transported crystals, the habits and crystal edges are more intricate that those observed for ice grown directly on substrates within the ESEM chamber. Portions of some crystals do appear smooth even at magnification greater than 1000x, a rare observation in our ESEM-grown crystals. The

WE-EF-303-05: Development and Commissioning of Real-Time Imaging Function for Respiratory-Gated Spot-Scanning Proton Beam Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyamoto, N; Takao, S; Matsuura, T

2015-06-15

to realize RGPT. Funding Support: This research was partially supported by Japan Society for the Promotion of Science (JSPS) through the FIRST Program. Conflict of Interest: Prof. Shirato has research fund from Hitachi Ltd, Mitsubishi Heavy Industries Ltd and Shimadzu Corporation.« less

Research interface on a programmable ultrasound scanner.

PubMed

Shamdasani, Vijay; Bae, Unmin; Sikdar, Siddhartha; Yoo, Yang Mo; Karadayi, Kerem; Managuli, Ravi; Kim, Yongmin

2008-07-01

Commercial ultrasound machines in the past did not provide the ultrasound researchers access to raw ultrasound data. Lack of this ability has impeded evaluation and clinical testing of novel ultrasound algorithms and applications. Recently, we developed a flexible ultrasound back-end where all the processing for the conventional ultrasound modes, such as B, M, color flow and spectral Doppler, was performed in software. The back-end has been incorporated into a commercial ultrasound machine, the Hitachi HiVision 5500. The goal of this work is to develop an ultrasound research interface on the back-end for acquiring raw ultrasound data from the machine. The research interface has been designed as a software module on the ultrasound back-end. To increase the amount of raw ultrasound data that can be spooled in the limited memory available on the back-end, we have developed a method that can losslessly compress the ultrasound data in real time. The raw ultrasound data could be obtained in any conventional ultrasound mode, including duplex and triplex modes. Furthermore, use of the research interface does not decrease the frame rate or otherwise affect the clinical usability of the machine. The lossless compression of the ultrasound data in real time can increase the amount of data spooled by approximately 2.3 times, thus allowing more than 6s of raw ultrasound data to be acquired in all the modes. The interface has been used not only for early testing of new ideas with in vitro data from phantoms, but also for acquiring in vivo data for fine-tuning ultrasound applications and conducting clinical studies. We present several examples of how newer ultrasound applications, such as elastography, vibration imaging and 3D imaging, have benefited from this research interface. Since the research interface is entirely implemented in software, it can be deployed on existing HiVision 5500 ultrasound machines and may be easily upgraded in the future. The developed research

Third-generation blood pumps with mechanical noncontact magnetic bearings.

PubMed

Hoshi, Hideo; Shinshi, Tadahiko; Takatani, Setsuo

2006-05-01

This article reviews third-generation blood pumps, focusing on the magnetic-levitation (maglev) system. The maglev system can be categorized into three types: (i) external motor-driven system, (ii) direct-drive motor-driven system, and (iii) self-bearing or bearingless motor system. In the external motor-driven system, Terumo (Ann Arbor, MI, U.S.A.) DuraHeart is an example where the impeller is levitated in the axial or z-direction. The disadvantage of this system is the mechanical wear in the mechanical bearings of the external motor. In the second system, the impeller is made into the rotor of the motor, and the magnetic flux, through the external stator, rotates the impeller, while the impeller levitation is maintained through another electromagnetic system. The Berlin Heart (Berlin, Germany) INCOR is the best example of this principle where one-axis control combination with hydrodynamic force achieves high performance. In the third system, the stator core is shared by the levitation and drive coil to make it as if the bearing does not exist. Levitronix CentriMag (Zürich, Switzerland), which appeared recently, employs this concept to achieve stable and safe operation of the extracorporeal system that can last for a duration of 14 days. Experimental systems including HeartMate III (Thoratec, Woburn, MA, U.S.A.), HeartQuest (WorldHeart, Ottawa, ON, Canada), MagneVAD (Gold Medical Technologies, Valhalla, NY, U.S.A.), MiTiHeart (MiTi Heart, Albany, NY, U.S.A.), Ibaraki University's Heart (Hitachi, Japan) and Tokyo Medical and Dental University/Tokyo Institute of Technology's disposable and implantable maglev blood pumps are also reviewed. In reference to second-generation blood pumps, such as the Jarvik 2000 (Jarvik Heart, New York, NY, U.S.A.), which is showing remarkable achievement, a question is raised whether a complicated system such as the maglev system is really needed. We should pay careful attention to future clinical outcomes of the ongoing clinical

Variability and Reproducibility of Segmental Longitudinal Strain Measurement: A Report From the EACVI-ASE Strain Standardization Task Force.

PubMed

Mirea, Oana; Pagourelias, Efstathios D; Duchenne, Jurgen; Bogaert, Jan; Thomas, James D; Badano, Luigi P; Voigt, Jens-Uwe

2018-01-01

In this study, we compared left ventricular (LV) segmental strain measurements obtained with different ultrasound machines and post-processing software packages. Global longitudinal strain (GLS) has proven to be a reproducible and valuable tool in clinical practice. Data about the reproducibility and intervendor differences of segmental strain measurements, however, are missing. We included 63 volunteers with cardiac magnetic resonance-proven infarct scar with segmental LV function ranging from normal to severely impaired. Each subject was examined within 2 h by a single expert sonographer with machines from multiple vendors. All 3 apical views were acquired twice to determine the test-retest and the intervendor variability. Segmental longitudinal peak systolic, end-systolic, and post-systolic strain were measured using 7 vendor-specific systems (Hitachi, Tokyo, Japan; Esaote, Florence, Italy; GE Vingmed Ultrasound, Horten, Norway; Philips, Andover, Massachusetts; Samsung, Seoul, South Korea; Siemens, Mountain View, California; and Toshiba, Otawara, Japan) and 2 independent software packages (Epsilon, Ann Arbor, Michigan; and TOMTEC, Unterschleissheim, Germany) and compared among vendors. Image quality and tracking feasibility differed among vendors (analysis of variance, p < 0.05). The absolute test-retest difference ranged from 2.5% to 4.9% for peak systolic, 2.6% to 5.0% for end-systolic, and 2.5% to 5.0% for post-systolic strain. The average segmental strain values varied significantly between vendors (up to 4.5%). Segmental strain parameters from each vendor correlated well with the mean of all vendors (r 2 range 0.58 to 0.81) but showed very different ranges of values. Bias and limits of agreement were up to -4.6 ± 7.5%. In contrast to GLS, LV segmental longitudinal strain measurements have a higher variability on top of the known intervendor bias. The fidelity of different software to follow segmental function varies considerably. We conclude that

Techno-Economic Analysis of a Secondary Air Stripper Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heberle, J.R.; Nikolic, Heather; Thompson, Jesse

We present results of an initial techno-economic assessment on a post-combustion CO2 capture process developed by the Center for Applied Energy Research (CAER) at the University of Kentucky using Mitsubishi Hitachi Power Systems’ H3-1 aqueous amine solvent. The analysis is based on data collected at a 0.7 MWe pilot unit combined with laboratory data and process simulations. The process adds a secondary air stripper to a conventional solvent process, which increases the cyclic loading of the solvent in two ways. First, air strips additional CO2 from the solvent downstream of the conventional steam-heated thermal stripper. This extra stripping of CO2more » reduces the lean loading entering the absorber. Second, the CO2-enriched air is then sent to the boiler for use as secondary air. This recycling of CO2 results in a higher concentration of CO2 in the flue gas sent to the absorber, and hence a higher rich loading of the solvent exiting the absorber. A process model was incorporated into a full-scale supercritical pulverized coal power plant model to determine the plant performance and heat and mass balances. The performance and heat and mass balance data were used to size equipment and develop cost estimates for capital and operating costs. Lifecycle costs were considered through a levelized cost of electricity (LCOE) assessment based on the capital cost estimate and modeled performance. The results of the simulations show that the CAER process yields a regeneration energy of 3.12 GJ/t CO2, a $53.05/t CO2 capture cost, and LCOE of $174.59/MWh. This compares to the U.S. Department of Energy’s projected costs (Case 10) of regeneration energy of 3.58 GJ/t CO2 , a $61.31/t CO2 capture cost, and LCOE of $189.59/MWh. For H3-1, the CAER process results in a regeneration energy of 2.62 GJ/tCO2 with a stripper pressure of 5.2 bar, a capture cost of $46.93/t CO2, and an LCOE of $164.33/MWh.« less

The Metastable Persistence of Vapor-Deposited Amorphous Ice at Anomalously High Temperatures

NASA Technical Reports Server (NTRS)

Blake, David F.; Jenniskens, Peter; DeVincenzi, Donald L. (Technical Monitor)

1995-01-01

Studies of the gas release, vaporization behavior and infrared (IR) spectral properties of amorphous and crystalline water ice have direct application to cometary and planetary outgassing phenomena and contribute to an understanding of the physical properties of astrophysical ices. Several investigators report anomalous phenomena related to the warming of vapor-deposited astrophysical ice analogs. However gas release, ice volatilization and IR spectral features are secondary or tertiary manifestations of ice structure or morphology. These observations are useful in mimicking the bulk physical and chemical phenomena taking place in cometary and other extraterrestrial ices but do not directly reveal the structural changes which are their root cause. The phenomenological interpretation of spectral and gas release data is probably the cause of somewhat contradictory explanations invoked to account for differences in water ice behavior in similar temperature regimes. It is the microstructure, micromorphology and microchemical heterogeneity of astrophysical ices which must be characterized if the mechanisms underlying the observed phenomena are to be understood. We have been using a modified Transmission Electron Microscope to characterize the structure of vapor-deposited astrophysical ice analogs as a function of their deposition, temperature history and composition. For the present experiments, pure water vapor is deposited at high vacuum onto a 15 K amorphous carbon film inside an Hitachi H-500H TEM. The resulting ice film (approx. 0.05 micrometers thick) is warmed at the rate of 1 K per minute and diffraction patterns are collected at 1 K intervals. These patterns are converted into radial intensity distributions which are calibrated using patterns of crystalline gold deposited on a small part of the carbon substrate. The small intensity contributed by the amorphous substrate is removed by background subtraction. The proportions of amorphous and crystalline material

Extension of the CAPRAM mechanism with the improved mechanism generator GECKO-A

NASA Astrophysics Data System (ADS)

Bräuer, Peter; Mouchel-Vallon, Camille; Tilgner, Andreas; Wolke, Ralf; Aumont, Bernard; Herrmann, Hartmut

2013-04-01

have been compared to results of previous versions and show a significant improvement in the new mechanism versions, when comparing the modelled data to field data from literature. For example, in CAPRAM 3.7 there is a malonic acid production of about 80 ng m-3 compared to a few ng m-3 in CAPRAM 3.0. The results in CAPRAM 3.7 confirm recent measurements by Bao et al. (2012), who measure up to 137 ng m-3. Moreover, several attempts have been undertaken to validate the mechanisms created by GECKO-A with own field experiments, such as the HCCT-2010 campaign and chamber experiments in the LEAK chamber. References Aumont, B., Szopa, S., Madronich, S.: Modelling the evolution of organic carbon during its gas-phase tropospheric oxidation: development of an explicit model based on a self generating approach. Atmos. Chem. Phys., 5, 2497-2517 (2005). Bao, L., Matsumoto, M., Kubota, T., Sekiguchi, K., Wang, Q., Sakamoto, K.: Gas/particle partitioning of low-molecular-weight dicarboxylic acids at a suburban site in Saitama, Japan. Atmos. Env., 47, 546 - 553 (2012).

Airborne Gravity Measurements using a Helicopter with Special Emphases on Delineating Local Gravity Anomalies Mainly for Detecting Active Seismic Faults (Invited)

NASA Astrophysics Data System (ADS)

Segawa, J.

2010-12-01

2000. Saitama-Tsukuba-Kashima-Nada. Flight Length 1,300km. Discovery of inconsistency between land and marine gravity nearby. 2)July 2000. Suruga Bay. Flight Length 1,500km. Gravity was contoured in the Suruga Bay. 3)November 2000. Enshu-Nada Sea. Flight Length 1,700km. First measurement of land-sea border line of the Tokai area. 4)October 2001. Enshu-Nada Sea. Flight Length 1,500km. Revisit to Enshu Nada sea. 5)December 2001. Kohdu-shima and Miyake Jima. Flight Length 1,800km. Measurement of gravity over the basin between Miyake and Kohdu. 6)June 2002. Enshu-Nada Sea. Flight Length 2,200km. Measurement of gravity across the Tenryu-River active fault. 7)November 2004. Iyonada and Sata Peninsula. (Commercial works). 8)March 2006. Middle Noto Peninsula. (Commercial works). 9)November 2006. Wakasa Bay. (Commercial works). 10)October 2008. North Noto Peninsula. (Commercial works). 11)November 2008. West Seto Inland Sea. (Commercial works). 12)November 2009. Shimokita Peninsula and Seto Inland Sea.

Cardiac-Specific Conversion Factors to Estimate Radiation Effective Dose From Dose-Length Product in Computed Tomography.

PubMed

Trattner, Sigal; Halliburton, Sandra; Thompson, Carla M; Xu, Yanping; Chelliah, Anjali; Jambawalikar, Sachin R; Peng, Boyu; Peters, M Robert; Jacobs, Jill E; Ghesani, Munir; Jang, James J; Al-Khalidi, Hussein; Einstein, Andrew J

2018-01-01

This study sought to determine updated conversion factors (k-factors) that would enable accurate estimation of radiation effective dose (ED) for coronary computed tomography angiography (CTA) and calcium scoring performed on 12 contemporary scanner models and current clinical cardiac protocols and to compare these methods to the standard chest k-factor of 0.014 mSv·mGy -1 cm -1 . Accurate estimation of ED from cardiac CT scans is essential to meaningfully compare the benefits and risks of different cardiac imaging strategies and optimize test and protocol selection. Presently, ED from cardiac CT is generally estimated by multiplying a scanner-reported parameter, the dose-length product, by a k-factor which was determined for noncardiac chest CT, using single-slice scanners and a superseded definition of ED. Metal-oxide-semiconductor field-effect transistor radiation detectors were positioned in organs of anthropomorphic phantoms, which were scanned using all cardiac protocols, 120 clinical protocols in total, on 12 CT scanners representing the spectrum of scanners from 5 manufacturers (GE, Hitachi, Philips, Siemens, Toshiba). Organ doses were determined for each protocol, and ED was calculated as defined in International Commission on Radiological Protection Publication 103. Effective doses and scanner-reported dose-length products were used to determine k-factors for each scanner model and protocol. k-Factors averaged 0.026 mSv·mGy -1 cm -1 (95% confidence interval: 0.0258 to 0.0266) and ranged between 0.020 and 0.035 mSv·mGy -1 cm -1 . The standard chest k-factor underestimates ED by an average of 46%, ranging from 30% to 60%, depending on scanner, mode, and tube potential. Factors were higher for prospective axial versus retrospective helical scan modes, calcium scoring versus coronary CTA, and higher (100 to 120 kV) versus lower (80 kV) tube potential and varied among scanner models (range of average k-factors: 0.0229 to 0.0277 mSv·mGy -1 cm -1 ). Cardiac k

Willingness to Pay for Elderly Telecare Service Using the Internet and Digital Terrestrial Broadcasting.

PubMed

Kaga, Satoshi; Suzuki, Teppei; Ogasawara, Katsuhiko

2017-10-24

In Japan over the past few years, more attention has been focused on unnoticed solitary death in the context of an aging society and the trend toward nuclear family. A number of institutions and companies have implemented a prevention measure with digital terrestrial broadcasting telecare services for the elderly: Hokkaido University; TV-Asahi Corporation; Hitachi, Ltd; Iwamizawa City; Hokkaido Television Broadcasting Co, Ltd; and Hamanasu Information Co, Ltd. Although this system is provided free of charge as a demonstration test, determining the appropriate price for the service is required for its sustainable operation. The aim of this study was to quantify individual willingness to pay (WTP) so as to test the tenability of digital terrestrial broadcasting service for elderly telecare. We used the contingent valuation method (CVM) to estimate the WTP for this service among 305 citizens (valid response rate 76.0%) living in Japan. A questionnaire survey was conducted for people aged 18 to 100 years according to Japanese age distribution from September 2016. To elicit WTP, we adopted a double-bound dichotomous choice method to ask the respondents whether they agree or disagree with the price we offered. The median WTP for this service's monthly fee is estimated to be 431 JPY (approximately US $3.7). The finding suggests that gender (0.66, P=.01), health consciousness (1.08, P=.01), willingness to use (2.38, P<.001), and seeing others less than once a week (1.00, P=.06) made a positive effect on WTP. We conclude that reliable WTP was elicited by CVM based on an Internet survey. Calculated median WTP for digital terrestrial broadcasting service for elderly telecare was 431 JPY (approximately US $3.7). In the analysis of factors that affect WTP, constant factors, log-bid, health consciousness, gender, see others less than one time for week, and willingness to use made positive effect to probability of acceptance. In comparison of WTP in different groups, age groups

Biofouling of Cr-Nickel Spray Coated Films on Steel Surfaces

NASA Astrophysics Data System (ADS)

Yoshida, Kento; Kanematsu, Hideyuki; Kuroda, Daisuke; Ikigai, Hajime; Kogo, Takeshi; Yokoyama, Seiji

2012-03-01

Nowadays, corrosion of metals brings us serious economic loss and it often reaches several percentage of GNP. Particularly the marine corrosion was serious and the counter measure was very hard to be established, since the number of factors is huge and complicated. One of the complicated factors in marine corrosion is biofouling. Biofouling was classified into two main categories, microfouling and macrofouling. The former is composed of biofilm formation mainly. Marine bacteria are attached to material surfaces, seeking for nutrition in oligotrophic environment and they excrete polysaccharide to form biofilm on metal surfaces. Then larger living matters are attached on the biofilms to develop biofouling on metal surfaces, which often lead loss and failures of metals in marine environments. From the viewpoint of corrosion protection and maintenance of marine structures, biofouling should be mitigated as much as possible. In this study, we applied spray coating to steels and investigated if chromium-nickel spray coating could mitigate the biofouling, being compared with the conventional aluminium-zinc spray coating in marine environments. The specimens used for this investigation are aluminium, zinc, aluminium-zinc, stacked chromium/nickel and those films were formed on carbon steel (JIS SS400). And the pores formed by spray coating were sealed by a commercial reagent for some specimens. All of those specimens were immersed into sea water located at Marina Kawage (854-3, Chisato, Tsu, Mie Prefecture) in Ise Bay for two weeks. The depth of the specimen was two meter from sea water surface and the distance was always kept constant, since they were suspended from the floating pier. The temperature in sea water changed from 10 to 15 degrees Celsius during the immersion test. The biofouling behavior was investigated by low vacuum SEM (Hitachi Miniscope TM1000) and X-ray fluorescent analysis. When the spray coated specimens with and without sealing agents were compared

Scanning electron microscope automatic defect classification of process induced defects

NASA Astrophysics Data System (ADS)

Wolfe, Scott; McGarvey, Steve

2017-03-01

utilization of a Hitachi RS4000 Defect Review SEM to perform Automatic Defect Classification with the objective of the total automated classification accuracy being greater than human based defect classification binning when the defects do not require multiple process step knowledge for accurate classification. The implementation of DRSEM ADC has the potential to improve the response time between defect detection and defect classification. Faster defect classification will allow for rapid response to yield anomalies that will ultimately reduce the wafer and/or the die yield.

Cybersickness-related changes in brain hemodynamics: A pilot study comparing transcranial Doppler and near-infrared spectroscopy assessments during a virtual ride on a roller coaster.

PubMed

Gavgani, Alireza Mazloumi; Wong, Rachel H X; Howe, Peter R C; Hodgson, Deborah M; Walker, Frederick R; Nalivaiko, Eugene

2018-07-01

Our aim was to assess cerebral blood flow changes during cybersickness. Transcranial Doppler (TCD) ultrasound and near infrared spectroscopy (NIRS) were used separately in two independent experiments. In both studies, a 15-min virtual roller coaster ride was used as a provocative visual stimulus. Subjective nausea ratings were obtained at 1 min intervals. The TCD study was performed in 14 healthy subjects (8 males and 6 females); in this study we also measured heart rate and arterial pressure. In a separate study a 52-channel NIRS device (Hitachi ETG-4000) was used to monitor activated brain regions by measuring oxy-hemoglobin (HbO 2) concentration in 9 healthy subjects (4 male, 5 females). The TCD study results showed a significant increase in systolic (+3.8 ± 1.8 mm Hg) and diastolic (+6.7 ± 1.3 mm Hg) pressure at the end of the virtual ride (maximum nausea) compared to baseline (no nausea). We also found that middle cerebral artery (MCA) and posterior cerebral artery (PCA) systolic flow velocity decreased significantly at the end of the ride when compared to baseline values. Likewise, the relative systolic and diastolic conductance in the MCA decreased significantly (-0.03 ± 0.02 cm × s -1  × mm Hg -1 , t, p = 0.0058 and -0.03 ± 0.01 cm × s -1  × mm Hg -1 , p = 0.05, respectively) at maximum nausea when compared to no nausea. Additionally, there was a significant decrease (-0.02 ± 0.01 cm × s -1  × mm Hg -1 , p = 0.03) in the relative systolic conductance in the PCA at the end of the ride. Analysis of the NIRS results showed a significant increase in HbO 2 concentration in 15/52 channels in parieto-temporal regions of both hemispheres in participants who experienced motion sickness symptoms during the experiment. This increase in HbO 2 concentration correlated with increasing nausea and motion sickness symptoms. We conclude that cybersickness causes complex changes in

Distribution and predominance of genotype 3 in hepatitis C virus carriers in the province of kahramanmaras, Turkey.

PubMed

Caliskan, Ahmet; Kirisci, Ozlem; Ozkaya, Esra; Ozden, Sevinc; Tumer, Seray; Caglar, Serkan; Guler, Selma Ates; Senol, Hande

2015-04-01

The hepatitis C virus (HCV) has six major genotypes and more than 100 subtypes, and the determination of the responsible genotype, collection of epidemiological data, tailoring antiviral therapy, and prediction of prognosis have an important place in disease management. The aim of the present study was to determine the distribution of HCV genotypes across geographic regions and compare these data with those obtained from other geographic locations. The HCV genotypes were identified in HCV RNA positive blood samples, obtained from different centers. The HCV genotype was determined using molecular methods [Real-Time Polymerase Chain Reaction (RT-PCR)] in 313 patients, who were found to be positive for HCV RNA. The presence of HCV RNA was investigated using the RT-PCR method in serum samples delivered to the Microbiology Laboratory at Kahramanmaras Necip Fazıl City Hospital, Kahramanmaras, Turkey, from the centers located in Kahramanmaras City center and peripheral districts of the province, between March 2010 and August 2014. The HCV genotype analysis was performed in HCV RNA positive samples, using RT-PCR reagents kit. Urine samples from the patients were tested for amphetamine with an Amphetamines II (AMPS2) kit, cocaine was tested with a Cocaine II (COC2) kit, opiates were tested with an Opiates II (OPI2) kit, and cannabinoids were tested with a Cannabinoids II (THC2) kit in Roche/Hitachi Cobas c501 device. The blood samples collected from 313 patients were included in the study. Of these patients, 212 (67.7%) were male and 101 (32.3%) were female. The mean age of the patients was 41.29 ± 20.32 years. In terms of HCV genotype distribution, 162 patients (51.7%) had genotype 1, 144 patients (46%) had genotype 3, four patients (1.3%) had genotype 2, and three patients (1%) had genotype 4. The results of urine drug tests were available in only 65 patients (20.2%). Of these, 61 (93.8%) patients had HCV genotype 3. In conclusion, the prevalence of HCV genotype 1 was

PDRD (SR13046) TRITIUM PRODUCTION FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, P.; Sheetz, S.

Utilizing the results of Texas A&M University (TAMU) senior design projects on tritium production in four different small modular reactors (SMR), the Savannah River National Laboratory’s (SRNL) developed an optimization model evaluating tritium production versus uranium utilization under a FY2013 plant directed research development (PDRD) project. The model is a tool that can evaluate varying scenarios and various reactor designs to maximize the production of tritium per unit of unobligated United States (US) origin uranium that is in limited supply. The primary module in the model compares the consumption of uranium for various production reactors against the base case ofmore » Watts Bar I running a nominal load of 1,696 tritium producing burnable absorber rods (TPBARs) with an average refueling of 41,000 kg low enriched uranium (LEU) on an 18 month cycle. After inputting an initial year, starting inventory of unobligated uranium and tritium production forecast, the model will compare and contrast the depletion rate of the LEU between the entered alternatives. This is an annual tritium production rate of approximately 0.059 grams of tritium per kilogram of LEU (g-T/kg-LEU). To date, the Nuclear Regulatory Commission (NRC) license has not been amended to accept a full load of TPBARs so the nominal tritium production has not yet been achieved. The alternatives currently loaded into the model include the three light water SMRs evaluated in TAMU senior projects including, mPower, Holtec and NuScale designs. Initial evaluations of tritium production in light water reactor (LWR) based SMRs using optimized loads TPBARs is on the order 0.02-0.06 grams of tritium per kilogram of LEU used. The TAMU students also chose to model tritium production in the GE-Hitachi SPRISM, a pooltype sodium fast reactor (SFR) utilizing a modified TPBAR type target. The team was unable to complete their project so no data is available. In order to include results from a fast reactor, the

Quality assurance of proton beams using a multilayer ionization chamber system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dhanesar, Sandeep; Sahoo, Narayan; Kerr, Matthew

2013-09-15

Purpose: The measurement of percentage depth-dose (PDD) distributions for the quality assurance of clinical proton beams is most commonly performed with a computerized water tank dosimetry system with ionization chamber, commonly referred to as water tank. Although the accuracy and reproducibility of this method is well established, it can be time-consuming if a large number of measurements are required. In this work the authors evaluate the linearity, reproducibility, sensitivity to field size, accuracy, and time-savings of another system: the Zebra, a multilayer ionization chamber system.Methods: The Zebra, consisting of 180 parallel-plate ionization chambers with 2 mm resolution, was used tomore » measure depth-dose distributions. The measurements were performed for scattered and scanned proton pencil beams of multiple energies delivered by the Hitachi PROBEAT synchrotron-based delivery system. For scattered beams, the Zebra-measured depth-dose distributions were compared with those measured with the water tank. The principal descriptors extracted for comparisons were: range, the depth of the distal 90% dose; spread-out Bragg peak (SOBP) length, the region between the proximal 95% and distal 90% dose; and distal-dose fall off (DDF), the region between the distal 80% and 20% dose. For scanned beams, the Zebra-measured ranges were compared with those acquired using a Bragg peak chamber during commissioning.Results: The Zebra demonstrated better than 1% reproducibility and monitor unit linearity. The response of the Zebra was found to be sensitive to radiation field sizes greater than 12.5 × 12.5 cm; hence, the measurements used to determine accuracy were performed using a field size of 10 × 10 cm. For the scattered proton beams, PDD distributions showed 1.5% agreement within the SOBP, and 3.8% outside. Range values agreed within −0.1 ± 0.4 mm, with a maximum deviation of 1.2 mm. SOBP length values agreed within 0 ± 2 mm, with a maximum deviation of 6 mm

Enabling CD SEM metrology for 5nm technology node and beyond

NASA Astrophysics Data System (ADS)

Lorusso, Gian Francesco; Ohashi, Takeyoshi; Yamaguchi, Astuko; Inoue, Osamu; Sutani, Takumichi; Horiguchi, Naoto; Bömmels, Jürgen; Wilson, Christopher J.; Briggs, Basoene; Tan, Chi Lim; Raymaekers, Tom; Delhougne, Romain; Van den Bosch, Geert; Di Piazza, Luca; Kar, Gouri Sankar; Furnémont, Arnaud; Fantini, Andrea; Donadio, Gabriele Luca; Souriau, Laurent; Crotti, Davide; Yasin, Farrukh; Appeltans, Raf; Rao, Siddharth; De Simone, Danilo; Rincon Delgadillo, Paulina; Leray, Philippe; Charley, Anne-Laure; Zhou, Daisy; Veloso, Anabela; Collaert, Nadine; Hasumi, Kazuhisa; Koshihara, Shunsuke; Ikota, Masami; Okagawa, Yutaka; Ishimoto, Toru

2017-03-01

The CD SEM (Critical Dimension Scanning Electron Microscope) is one of the main tools used to estimate Critical Dimension (CD) in semiconductor manufacturing nowadays, but, as all metrology tools, it will face considerable challenges to keep up with the requirements of the future technology nodes. The root causes of these challenges are not uniquely related to the shrinking CD values, as one might expect, but to the increase in complexity of the devices in terms of morphology and chemical composition as well. In fact, complicated threedimensional device architectures, high aspect ratio features, and wide variety of materials are some of the unavoidable characteristics of the future metrology nodes. This means that, beside an improvement in resolution, it is critical to develop a CD SEM metrology capable of satisfying the specific needs of the devices of the nodes to come, needs that sometimes will have to be addressed through dramatic changes in approach with respect to traditional CD SEM metrology. In this paper, we report on the development of advanced CD SEM metrology at imec on a variety of device platform and processes, for both logic and memories. We discuss newly developed approaches for standard, IIIV, and germanium FinFETs (Fin Field Effect Transistors), for lateral and vertical nanowires (NW), 3D NAND (three-dimensional NAND), STT-MRAM (Spin Transfer Magnetic Torque Random-Access Memory), and ReRAM (Resistive Random Access Memory). Applications for both front-end of line (FEOL) and back-end of line (BEOL) are developed. In terms of process, S/D Epi (Source Drain Epitaxy), SAQP (Self-Aligned Quadruple Patterning), DSA (Dynamic Self-Assembly), and EUVL (Extreme Ultraviolet Lithography) have been used. The work reported here has been performed on Hitachi CG5000, CG6300, and CV5000. In terms of logic, we discuss here the S/D epi defect classification, the metrology optimization for STI (Shallow Trench Isolation) Ge FinFETs, the defectivity of III-V STI Fin

Microstructural investigation of a locally mirror-like surface collected at 4 km depth in a Pomeranian shale sample

NASA Astrophysics Data System (ADS)

Pluymakers, Anne; Renard, Francois

2016-04-01

The presence of shiny sliding surfaces, or mirror surfaces, is sometimes thought to have been caused by slip at seismic velocities. Many fault mirrors reported so far are described to occur in carbonate-rich rocks. Here we present microstructural data on a mirror-like slip surface in the Pomeranian shale, recovered from approximately 4 km depth. The accommodated sliding of this fault is probably small, not more than one or two centimeter. The Pomeranian shale is a dark-grey to black shale, composed of 40-60% illite plus mica, 1-10% organic matter, 10% chlorite, and 10 % carbonates plus minor amounts of K-feldspar, plagioclase and kaolinite. In this sample, the surface is optically smooth with striations and some patches that reflect light. Observations using a Hitachi TM3000 (table-top) SEM show that the striations are omnipresent, though more prominent in the carbonate patches (determined using EDS analysis). The smooth surface is locally covered by granular material with a grain size up to 10 μm. This is shown to consist of a mixture of elements and thus likely locally derived fault gouge. The clay-rich parts of the smooth surface are equidimensional grains, with sub-micron grain sizes, whereas in the unperturbed part of the shale core the individual clay platelets are easy to distinguish, with lengths up to 10 μm. The striated calcite-rich patches appear as single grains with sizes up to several millimeters, though they occasionally are smeared out in a direction parallel to the striations. We have analyzed surface roughness at magnifications of 2.5x to 100x using a standard White Light Interferometer, parallel and perpendicular to slip. At low magnifications, 2.5x and 5x, Hurst exponents were anomalously low, around 0.1 to 0.2, interpreted to be related to a lack of sufficient resolution to pick up the striations. At higher magnification the Hurst exponent is 0.34 to 0.43 parallel to the striation, and 0.44 to 0.61 perpendicular to the striation. This

Characterization of magnetic spherical fractions in sand deposits for interpretation of environmental change around the El- Zayyan temple, Kharga Oasis, Western Desert, Egypt

NASA Astrophysics Data System (ADS)

Watanabe, Makiko; Koizumi, Natsuko; Kato, Sayuri; Kikuchi, Ryohei; Kamei, Hiroyuki

2014-05-01

sand layers with a focus on the spherical magnetic fractions having relations with accumulation of free iron oxides, condition of water and microbial activities. The study sites were located west of the El-Zayyan temple, and six and seven samples were collected every 10 cm from the two sand profiles, Zy-R and Zy-6, respectively. AMS 14C dating was conducted using fine fractions of an organo-mineral complex; date ranges 5,000-8,400 yBP and 5,500-7,800 yBP were assigned to Zy-R and Zy-6, respectively. Spherical fractions, separated into six colored-types, were extracted using a neodymium magnet, and then characterized by SEM observation, EDX elemental analysis (FE-SEM S4700, Hitachi, Genesis, EDAX), and X-ray micro-crystal structural analysis (D8-Discover, Bruker axs) to discuss their origins. The vertical change in the density of each fraction by weight and counts in sand revealed the environmental change.

A novel approach to TEM preparation with a (7-axis stage) triple-beam FIB-SEM system

NASA Astrophysics Data System (ADS)

Clarke, Jamil J.

2015-10-01

material, and better pin pointing of the area of interest while reducing overall processing time for the TEM sample preparation process and enhancing repeatability through ease of use via software controls. The development of these new technologies, incorporating a third Ar/Xe ion beam column in conjunction with the electron and gallium ion beam column, a 7-axis stage for enhanced sample orientation with tilt functions in two axes and automated swing control along with a host of additional functions which address the factors aforementioned such as electron and ion scan techniques and curtain effect removal by the use of hardware and software components that are key to reduce typical FIB related artifacts, all of which are called "ACE [Anti Curtaining Effect] Technologies" are explained. The overall developments of these technologies are to address a significant point that productivity, throughput and repeatability are comprised by synergy between the user, application, software and hardware within a FIB-SEM system. The latest Hitachi FIB-SEM platform offers these innovations for reliability, repeatability and high quality lamella preparation for Cs-corrected (S)TEMs.

Geochemical (LA-ICP-MS) investigations of baddeleyite from the Palaeoproterozoic mafic and Palaeozoic alkaline intrusions in the Arctic part of the Baltic shield

NASA Astrophysics Data System (ADS)

Drogobuzhskaya, Svetlana; Bayanova, Tamara; Novikov, Andrey

2017-04-01

Baddeleyite is a zirconium dioxide mineral, which is very important, but less common as zircon. While the zircon microelementary composition study is widely applicable, the baddeleyite geochemical features are poorly known. The first data on REE concentrations and distribution in baddeleyite were published in the past century. Baddeleyite is used as a geochronometer for dating mafic and alkaline rocks. It may be noted that the data on its geochemical composition are quite contradictory with a strongly varying Ce anomaly value and absent Eu anomaly in some samples. The new data on the elementary composition of baddeleyite (REE, Hf, U, Th, Y, and Ti) from the Monchegorsk pluton mafic rocks (2.5 Ga) and Kovdor and Vuoriyarvi deposits (380 Ma) was obtained. The sample morphology was studied using an electronic spectroscopy method (Hitachi S-430), and the position of local analysis on baddeleyite crystals was chosen based on analyzed optic images of minerals. The content of REE and other elements was measured using LA-ICP-MS technique on quadrupole mass-spectrometer ELAN 9000 DRC-e (Perkin Elmer) with laser evaporator UP-266 MACRO (New Wave Research) with a wave length of 266 nm for sampling. The laser ablation was made in argon atmosphere in a 35 and 70 μm diameter spot or when scanning to a line with a pulse repetition rate of 10 Hz and pulse energy of 14-15 J/cm2. The device was calibrated using the NIST SRM 612 standard with a REE, U, and Th concentration of about 40 ppm. The baddeleyite from reference rocks of mafic intrusions are characterized by medium concentrations of Hf (0.69-1.9 %), Th (7.6-21.1), REE (50.3-162), U (164-357), Y (5.0-149) ppm for the sample M-2 from Monchegorsk. Another rocks of alkaline intrusions are depleted in Th (0.25-5.9), REE (9.2-103), U (1.8-48.1), Y(2.9-65.9) ppm and Hf (0.20-1.9%) for the sample Bd-400 from Vuoriyarvi and Hf (0.18-1.3 %), Th (0.4-5.2), REE (2.1-17.7), U (4.2-32.6), Y(2.2-68.4) ppm for the samples Bd-300 and Bd-300

PREFACE AND CONFERENCE SUMMARY: Advanced Metrology for Ultrasound in Medicine, 27 28 April 2004

NASA Astrophysics Data System (ADS)

Shaw, Adam

2004-01-01

AMUM 2004 proved to be a great success and provided a fantastic opportunity for the world's ultrasound experts from medicine, industry and academia to explore the measurement challenges presented by new and emerging clinical ultrasound equipment. There were a total of 88 attendees. Of these 39 were from the UK, 22 from the rest of Europe, and 27 from outside Europe. 31 of the delegates were from industry, 22 were university-based, 18 from hospitals, 10 from other National Metrology Institutes and regulatory bodies, and 7 from NPL. Test your knowledge of the ultrasound community by trying to name all the faces in the group photograph! It was especially gratifying to see so many major medical equipment manufacturers represented—including Siemens, Philips, Esaote, Kontron, Pie Medical, G.E., Hitachi, Aloka and Imasonic—since it is essential that there is a good dialogue between industry and the measurement community. The presentations were split into 8 oral sessions—Hydrophones, Hydrophone measurements, Safety and thermal hazard, Measurement challenges for diagnostic ultrasound, Measurement of therapy fields, Tissue interaction, Novel measurement methods, and Measurement challenges for therapeutic ultrasound; and 3 poster sessions—Performance of diagnostic equipment, Measurement and safety, and Field modelling. It was always my hope that this conference would provide a framework for the development of measurement methods to meet the metrological challenges we face over the next decade. To this end, I have asked the Chairs of each oral and poster session to give their views of their own session and of the more general requirements in that topic area. The feedback I received both during and subsequent to the meeting was almost uniformly good; this was borne out by the returned questionnaires, with most categories being scored excellent or good. I was delighted at the high standard of the presentations and to see delegates of such reputation and experience in the

Multi-scale 3D characterization of long period stacking ordered structure in Mg-Zn-Gd cast alloys.

PubMed

Ishida, Masahiro; Yoshioka, Satoru; Yamamoto, Tomokazu; Yasuda, Kazuhiro; Matsumura, Syo

2014-11-01

Magnesium alloys containing rare earth elements are attractive as lightweight structural materials due to their low density, high-specific strength and recycling efficiency. Mg-Zn-Gd system is one of promising systems because of their high creep-resistant property[1]. It is reported that the coherent precipitation formation of the 14H long period stacking ordered structure (LPSO) in Mg-Zn-Gd system at temperatures higher than 623 K[2,3]. In this study, the 14H LPSO phase formed in Mg-Zn-Gd alloys were investigated by multi-scale characterization with X-ray computer tomography (X-CT), focused ion beam (FIB) tomography and aberration-corrected STEM observation for further understanding of the LPSO formation mechanism.The Mg89.5 Zn4.5 Gd6 alloy ingots were cast using high-frequency induction heating in argon atmosphere. The specimens were aged at 753 K for 24 h in air. The aged specimen were cut and polished mechanically for microstructural analysis. The micrometer resolution X-CT observation was performed by conventional scaner (Bruker SKY- SCAN1172) at 80 kV. The FIB tomography and energy dispersive x-ray spectroscopy (EDS) were carried out by a dual beam FIB-SEM system (Hitachi MI-4000L) with silicon drift detector (SDD) (Oxford X-Max(N)). The electron acceleration voltages were used with 3 kV for SEM observation and 10 kV for EDX spectroscopy. The 3D reconstruction from image series was performed by Avizo Fire 8.0 software (FEI). TEM/STEM observations were also performed by transmission electron microscopes (JEOL JEM 2100, JEM-ARM 200F) at the acceleration voltage of 200 keV.The LPSO phase was observed clearly in SEM image of the Mg89.5Zn4.5Gd6 alloy at 753 K for 2h (Fig.1 (a)). The atomic structure of LPSO phase observed as white gray region of SEM image was also confirmed as 14H LPSO structure by using selected electron diffraction patterns and high-resolution STEM observations. The elemental composition of LPSO phase was determined as Mg97Zn1Gd2 by EDS analyses

Fluorescence spectroscopy as a tool for quality assessment of humic substances

NASA Astrophysics Data System (ADS)

Boguta, Patrycja

2016-04-01

*The studies were partly carried out within the framework of a research project. The project was financed from funds of National Science Center on the base of decision number DEC-2013/11/D/NZ9/02545. Fluorescence spectroscopy belongs to modern, non-destructive, rapid and relatively cheap methods, as well as for many years it was successfully used in studies of organic compounds in the fields of medicine, biology and chemistry. On the other hand, soil organic matter is a group of compounds with a complex spatial structure showing a large number of groups with different kinds of fluorophores. This could suggest the possibility of application of fluorescence spectroscopy in assessing the quality of humic substances as well as in monitoring of their chemical transformations. The aim of study was chemical description of humic and fulvic acids based on fluorescence spectra, as well as an attempt of evaluation of changes occurring under the influence of different pH and during interactions with various concentrations of metal. The humic and fulvic acids were isolated from chemically different soils. The measurements were carried out on Hitachi fluorescence spectrometer in solutions with a concentration of humic acids 40mg dm-3, at pH from 3 to 7, and for the evaluation of the metal impact: with increasing Zn concentrations (0-50mg dm-3). The fluorescence spectra were recorded in the form of synchronous and emission-excitation matrices (EEM). Studies have shown the presence of different groups of fluorophores. Synchronous spectra were characterized by a well-separated bands showing fluorescence in the area of low, medium and high wavelengths, suggesting the presence of structures, both weakly and strongly humified. EEM spectra revealed map of fluorophores within wide ranges of emission and excitation. Fluorophores differed in both position and intensity. The highest intensity was observed for compounds with the lowest humification degree which might be due to high amount

Integrating planning and design optimization for thermal power generation in developing economies: Designs for Vietnam

NASA Astrophysics Data System (ADS)

Pham, John Dinh Chuong

In the twenty first century, global warming and climate change have become environmental issues worldwide. There is a need to reduce greenhouse gas emissions from thermal power plants through improved efficiency. This need is shared by both developed and developing countries. It is particularly important in rapidly developing economies (for example, Vietnam, South Korea, and China) where there is very significant need to increase generation capacity. This thesis addresses improving thermal power plant efficiency through an improved planning process that emphasizes integrated design. With the integration of planning and design considerations of key components in thermal electrical generation, along with the selection of appropriate up-to-date technologies, greater efficiency and reduction of emissions could be achieved. The major barriers to the integration of overall power plant optimization are the practice of individual island tendering packages, and the lack of coordinating efforts between major original equipment manufacturers (OEM). This thesis assesses both operational and design aspects of thermal power plants to identify opportunities for energy saving and the associated reduction of CO2 emissions. To demonstrate the potential of the integrated planning design approach, three advanced thermal power plants, using anthracite coal, oil and gas as their respective fuel, were developed as a case study. The three plant formulations and simulations were performed with the cooperation of several leading companies in the power industry including Babcock & Wilcox, Siemens KWU, Siemens-Westinghouse Power Corporation, Hitachi, Alstom Air Preheater, TLT-Covent, and ABB Flakt. The first plant is a conventional W-Flame anthracite coal-fired unit for base load operation. The second is a supercritical oil-fired plant with advanced steam condition, for two shifting and cycling operations. The third plant is a gas-fired combined cycle unit employing a modern steam-cooled gas

Evaluation of Biomass and Coal Briquettes for a Spreader Stoker Boiler Using an Experimental Furnace --- Modeling and Test

NASA Astrophysics Data System (ADS)

Wiggins, Gavin Memminger

emissions levels for CO, CO2, SO2, and SO3 among the various fuels were the same for the two methods. From the modeling and experimental results, it is clear that the opportunity exists to reduce boiler emissions using biomass materials. In computer controlled systems, electric motor and connector arcing can cause operational difficulties such as reduced motor life, connector/cable failure, and VFD tripping. To better understand the behavior of electric motors in diverse environments, experimental testing has been conducted on two different 230/460 V 3-phase AC brushless motors at unloaded and loaded conditions. The motors were driven with a 200 VAC or 400 VAC class Hitachi variable-frequency drive (VFD) and operated in air, argon, and helium environments for a duration of eight hours. Voltage transients and temperatures were monitored for these tests. The largest recorded voltage spike of 1,852 V occurred during 480 VAC start/stop tests. In addition, two different cable lengths between the VFD and motor terminals were tested. The experimental results demonstrated that the shorter cable produced smaller voltage spikes when compared to the longer electrical cable. For all tests, both motors operated coolest in the helium environment and warmest in the argon environment.

Fast auto-acquisition tomography tilt series by using HD video camera in ultra-high voltage electron microscope.

PubMed

Nishi, Ryuji; Cao, Meng; Kanaji, Atsuko; Nishida, Tomoki; Yoshida, Kiyokazu; Isakozawa, Shigeto

2014-11-01

The ultra-high voltage electron microscope (UHVEM) H-3000 with the world highest acceleration voltage of 3 MV can observe remarkable three dimensional microstructures of microns-thick samples[1]. Acquiring a tilt series of electron tomography is laborious work and thus an automatic technique is highly desired. We proposed the Auto-Focus system using image Sharpness (AFS)[2,3] for UHVEM tomography tilt series acquisition. In the method, five images with different defocus values are firstly acquired and the image sharpness are calculated. The sharpness are then fitted to a quasi-Gaussian function to decide the best focus value[3]. Defocused images acquired by the slow scan CCD (SS-CCD) camera (Hitachi F486BK) are of high quality but one minute is taken for acquisition of five defocused images.In this study, we introduce a high-definition video camera (HD video camera; Hamamatsu Photonics K. K. C9721S) for fast acquisition of images[4]. It is an analog camera but the camera image is captured by a PC and the effective image resolution is 1280×1023 pixels. This resolution is lower than that of the SS-CCD camera of 4096×4096 pixels. However, the HD video camera captures one image for only 1/30 second. In exchange for the faster acquisition the S/N of images are low. To improve the S/N, 22 captured frames are integrated so that each image sharpness is enough to become lower fitting error. As countermeasure against low resolution, we selected a large defocus step, which is typically five times of the manual defocus step, to discriminate different defocused images.By using HD video camera for autofocus process, the time consumption for each autofocus procedure was reduced to about six seconds. It took one second for correction of an image position and the total correction time was seven seconds, which was shorter by one order than that using SS-CCD camera. When we used SS-CCD camera for final image capture, it took 30 seconds to record one tilt image. We can obtain a tilt

PREFACE: Advanced Metrology for Ultrasound in Medicine12-14 May 2010

NASA Astrophysics Data System (ADS)

Shaw, Adam

2011-02-01

Conference logo AMUM 2010 is the successor to the first AMUM conference held in 2004, which was the conference featured in the very first issue of the Journal of Physics: Conference Series (http://iopscience.iop.org/1742-6596/1/1). Like its predecessor, AMUM 2010 proved to be very successful and provided a fantastic opportunity for the world's ultrasound experts from medicine, industry and academia to explore the measurement challenges presented by new and emerging clinical ultrasound equipment. 2010 was a very difficult year economically for much of the world, and then air travel over Europe was thrown into chaos by prolonged ash clouds from the Icelandic volcano Eyjafjallajökull in April. So it was something of a relief to see such good attendance; this is a clear indication of the need for this conference with its focus on metrology in medical ultrasound. There were a total of 70 attendees: of these 34 were from the UK, 16 from the rest of Europe, and 20 from outside Europe. National Metrology Institutes from no fewer than nine different countries were represented, some of them very new to the field, some with a recent growth of interest in ultrasound, and others with a well-established reputation. I was particularly pleased to see younger researchers from those NMIs new to ultrasound attend and have the chance to mix with such a wide grouping of their peers and present their work. There was also a strong attendance by industry including the major imaging companies such as GE Healthcare, Siemens, Philips Healthcare, Hitachi Medical, Aloka, Medison and the newer Supersonic Imagine; and more specialist companies such as Imasonic, Onda Corporation, Unisyn Medical Technologies, and Polytec and Precision Acoustics, our partner in organizing the event. The conference was spread over 3 days with plenty of time for discussions over coffee; the afternoon of the 3rd day was dedicated to laboratory visits within NPL. We were fortunate to have some excellent Keynote

The Structure and Evolution of a CM2 Regolith: A Three-dimensional Study of Cold Bokkeveld

NASA Astrophysics Data System (ADS)

Greenwood, R. C.; Hutchison, R.; Jones, C. G.

1993-07-01

The matrices of CM2 chondrites are a complex assemblage of high- and low-temperature components, some of which may have formed in a nebular environment, others by reprocessing in an asteroidal regolith. A necessary first step in identifying the primitive components is to understand the processes by which they were modified following incorporation into their parent bodies. Here we report the results of a textural investigation of Cold Bokkeveld. This work follows an earlier study [1] that had identified a planar fabric within Cold Bokkeveld, defined by the alignment of the long axes of various macroscopic objects. However, on sectioning the meteorite it was realized that it is composed of a more diverse range of lithic material than had been previously recognized. The nature and origin of these lithic fragments have therefore been examined in some detail. Method: To study the structure and fabric of Cold Bokkeveld a single fusion-crusted stone (maximum diameter 8cm) was cut along three directions at right angles and a series of slices removed. The stone was photographed before and after cutting to record the relationships between the slices and to document the major structural features. A polished section from each of the orthogonal cuts was prepared (total area 9 cm^2) and these were photographed using a Hitachi S2500 SEM. Montages of back- scattered electron images (x30 magnification), covering the full area of each section, were assembled. Results: Cold Bokkeveld is an inhomogeneous breccia comprising lithic fragments enclosed in a matrix of comminuted clastic material. Two end-member lithic fragment-types are present, fine- grained dark clasts and lighter-colored, coarse-grained fragments. Dark clasts are up to 1.2 cm diameter and consist predominantly of fine-grained Mg-phyllosilicate-rich material with a variable Fe-Ni sulphide content; coarser-grained, anhedral olivine grains (Fo(sub)98.1-99.5) are sometimes present. Raster- beam analysis of the four largest

PREFACE: 17th International Conference on Microscopy of Semiconducting Materials 2011

NASA Astrophysics Data System (ADS)

Walther, T.; Midgley, P. A.

2011-11-01

where necessary. In the end, 61 manuscripts were accepted for publication. The Editors are very grateful to the following colleagues for their rapid and careful reviewing of manuscripts: M Albrecht, J S Barnard, R Beanland, G A Botton, D Cooper, L Clement, A J Craven, A G Cullis, N Daneu, V Grillo, E Grünbaum, A Gustafsson, P-H Jouneau, O L Krivanek, D Larson, M Luysberg, S I Molina, F A Ponce, A Rosenauer, F M Ross, I M Ross, J-L Rouviere, and Z L Wang. Prizes for student presentations at the conference were awarded to Mr Alberto Eljarrat, Universitat de Barcelona, and Mr Thibaud Denneulin, CEA-LETI Grenoble, both of whom are presenting their results also as contributions to this proceedings volume. Entertainment during the conference dinner was provided by the college's string quartet, and after the meal we held the now traditional friendly competition between teams of microscopists; this year teams were asked to construct models of scientific instruments using only cardboard, paper, sticky tape and glue. By unanimous vote, the team who presented the 'Atomic Food Microscope (AFM)' prototype won first prize - the deft 'dipping mode' of the cardboard cantilever (see photo) was a highlight! Figure 2 Figure 2. The prize winning 'Atomic Food Microscope (AFM)' in action! The organisers are very grateful to the following companies who contributed to the success of the meeting by presenting trade stands during an exhibition on the evening of 5 April: Agar Scientific, Bruker, CamScan, FEI, Gatan, Hitachi High Technologies, HREM Research, IOP Publishing, JEOL, Leica Microsystems and MICOS. Finally, we would like to thank the staff of the Institute of Physics for their expert assistance in planning and organising this conference and in particular Claire Garland for her dedicated professional support and her always joyful approach to any issues that arose. October 2011 T Walther P A Midgley

PREFACE: Workshop on 'Buried' Interface Science with X-rays and Neutrons

NASA Astrophysics Data System (ADS)

Sakurai, Kenji

2007-06-01

The 2007 workshop on `buried' interface science with X-rays and neutrons was held at the Institute of Materials Research, Tohoku University, in Sendai, Japan, on July 22-24, 2007. The workshop was the latest in a series held since 2001; Tsukuba (December 2001), Niigata (September 2002), Nagoya (July 2003), Tsukuba (July 2004), Saitama (March 2005), Yokohama (July 2006), Kusatsu (August 2006) and Tokyo (December 2006). The 2007 workshop had 64 participants and 34 presentations. There are increasing demands for sophisticated metrology in order to observe multilayered materials with nano-structures (dots, wires, etc), which are finding applications in electronic, magnetic, optical and other devices. Unlike many other surface-sensitive methods, X-ray and neutron analysis is known for its ability to see even `buried' function interfaces as well as the surface. It is highly reliable in practice, because the information, which ranges from the atomic to mesoscopic scale, is quantitative and reproducible. The non-destructive nature of this type of analytical method ensures that the same specimen can be measured by other techniques. However, we now realize that the method should be upgraded further to cope with more realistic problems in nano sciences and technologies. In the case of the reflectivity technique and other related methods, which have been the main topics in our workshops over the past 7 years, there are three important directions as illustrated in the Figure. Current X-ray methods can give atomic-scale information for quite a large area on a scale of mm2-cm2. These methods can deliver good statistics for an average, but sometimes we need to be able to see a specific part in nano-scale rather than an average structure. In addition, there is a need to see unstable changing structures and related phenomena in order to understand more about the mechanism of the functioning of nano materials. Quick measurements are therefore important. Furthermore, in order to apply

Fluorescence spectroscopy of soil pellets : The use of CP/PARAFAC.

NASA Astrophysics Data System (ADS)

Mounier, Stéphane; Nicolodeli, Gustavo; Redon, Roland; Hacherouf, Kalhed; Milori, Debora M. B. P.

2014-05-01

Fluorescence spectroscopy is one of the most sensitive techniques available for analytical purposes. It is relatively easy to implement, phenomenologically straightforward and well investigated. Largely non-invasive and fast, so that it can be useful for environmental applications. Fluorescence phenomenon is highly probable in molecular systems containing atoms with lone pairs of electrons such as C=O, aromatic, phenolic, quinone and more rigid unsaturated conjugated systems. These functional groups are present in humic substances (HS) from soils (Senesi, 1990; N. Senesi et al., 1991) and represent the main fluorophors of Soil Organic Matter (SOM). The extension of the conjugated electronic system, the level of heteroatom substitution and type and number of substituting groups under the aromatic rings strongly affect the intensity and wavelength of molecular fluorescence. However, to analyse the SOM it is generally done a chemical extraction that allows measuring the fluorescence response of the liquid extract. To avoid this fractionation of the SOM, Milori et al. (2006) proposed the application of laser induced fluorescence spectroscopy (LIFS) in whole soil. This work intends to assess the technical feasibility of 3D fluorescence spectroscopy using lamp for excitation to analyse solids opaque samples prepared with different substances. Seventy four (74) solid samples were prepared from different mixtures of boric acid (BA), humic substance acid and tryptophan (TRP) powder. The compounds were mixture and a pellet was done by using pressure (8 ton). The pellets were measured using a spectrofluorimeter HITACHI F4500, and a 3D fluorescence tensor was done from emission spectra (200-600 nm) with excitation range from 200 to 500 nm. The acquisition parameters were: step at 5 nm, scan speed at 2400 nm.min-1, response time at 0.1 s, excitation and emission slits at 5 nm and photomultiplier voltage at 700 V. Furthermore, measures of Laser-induced Fluorescence were

Fukushima Nuclear Crisis Recovery: A Modular Water Treatment System Deployed in Seven Weeks - 12489

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denton, Mark S.; Mertz, Joshua L.; Bostick, William D.

2012-07-01

On March 11, 2011, the magnitude 9.0 Great East Japan earthquake, Tohoku, hit off the Fukushima coast of Japan. This was one of the most powerful earthquakes in recorded history and the most powerful one known to have hit Japan. The ensuing tsunami devastated a huge area resulting in some 25,000 persons confirmed dead or missing. The perfect storm was complete when the tsunami then found the four reactor, Fukushima-Daiichi Nuclear Station directly in its destructive path. While recovery systems admirably survived the powerful earthquake, the seawater from the tsunami knocked the emergency cooling systems out and did extensive damagemore » to the plant and site. Subsequent hydrogen generation caused explosions which extended this damage to a new level and further flooded the buildings with highly contaminated water. Some 2 million people were evacuated from a fifty mile radius of the area and evaluation and cleanup began. Teams were assembled in Tokyo the first week of April to lay out potential plans for the immediate treatment of some 63 million gallons (a number which later exceeded 110 million gallons) of highly contaminated water to avoid overflow from the buildings as well as supply the desperately needed clean cooling water for the reactors. A system had to be deployed with a very brief cold shake down and hot startup before the rainy season started in early June. Joined by team members Toshiba (oil removal system), AREVA (chemical precipitation system) and Hitachi-GE (RO system), Kurion (cesium removal system following the oil separator) proposed, designed, fabricated, delivered and started up a one of a kind treatment skid and over 100 metric tons of specially engineered and modified Ion Specific Media (ISM) customized for this very challenging seawater/oil application, all in seven weeks. After a very short cold shake down, the system went into operation on June 17, 2011 on actual waste waters far exceeding 1 million Bq/mL in cesium and many other

Committees

NASA Astrophysics Data System (ADS)

2012-11-01

Quebec IREQ, Varennes Canada Etienne PARKINSON Andritz Hydro Ltd. Switzerland B V S S S PRASAD Indian Institute of Technology Madras India Stefan RIEDELBAUCH Stuttgart University Germany Michel SABOURIN Alstom Hydro Canada Inc Canada Bruno SCHIAVELLO Flowserve Corporation USA Katsumasa SHIMMEI Hitachi Ltd Japan Christoph SINGRTüN VDMA Germany Ale? SKOTAK CKD Blansko Engineering, a s Czech Republic Toshiaki SUZUKI Toshiba Corporation Japan Andy C C TAN Queensland University of Technology Australia Geraldo TIAGO FILHO Universidade Federal de Itajuba Brazi Thi C VU Andritz Hydro Ltd Canada Satoshi WATANABE Kyushu University Japan S H WINOTO National University of Singapore Singapore Woo-Seong WOO STX Institute of Technology Korea International Technical Committee François AVELLAN (principal) EPFL-LMH Switzerland Xingqi LUO (principal) Xi'an University of Technology China Martin BÖHLE Kaiserslautern University Germany Gerard BOIS ENSAM France Young-Seok CHOI KITECH Korea Luca d'AGOSTINO University of Pisa Italy Eduard EGUSQUIZA Polytechnical University Catalonia Spain Arpad FAY University of Miskolcz Hungary Richard FISHER Voith Hydro Inc USA Regiane FORTES-PATELLA Institute Polytechnique de Grenoble France Aleksandar GAJIC University of Belgrade Serbia José GONZÁLEZ Universidad de Oviedo Spain François GUIBAULT Ecole Polytechnique de Montreal Canada Toshiaki IKOHAGI Tohoku University Japan Chisachi KATO University of Tokyo Japan Kwang-Yong KIM Inha University Korea Youn-Jea KIM Sungkyunkwan University Korea Smaine KOUIDRI Université Pierre et Marie Curie (Paris 6) France Shengcai LI Warwick University UK Adrian LUNGU Dunarea de Jos University of Galati Romania Torbjøm K NIELSEN NTNU Norway Michihiro NISHI Tsinghua University China Peter PELZ Darmstadt University Germany Frantisek POCHYLY Brno University Czech Republic Albert RUPRECHT University of Stuttgart Germany Rudolf SCHILLING Technische University München Germany Wei SHYY HKUST Hong Kong,China Romeo SUSAN

PREFACE: Buried Interface Sciences with X-rays and Neutrons 2010

NASA Astrophysics Data System (ADS)

Sakurai, Kenji

2011-09-01

The 2010 summer workshop on buried interface science with x-rays and neutrons was held at Nagoya University, Japan, on 25-27 July 2010. The workshop was organized by the Japan Applied Physics Society, which established a group to develop the research field of studying buried function interfaces with x-rays and neutrons. The workshop was the latest in a series held since 2001; Tsukuba (December 2001), Niigata (September 2002), Nagoya (July 2003), Tsukuba (July 2004), Saitama (March 2005), Yokohama (July 2006), Kusatsu (August 2006), Tokyo (December 2006), Sendai (July 2007), Sapporo (September 2007), Tokyo (December 2007), Tokyo-Akihabara (July 2009) and Hiratsuka (March 2010). The 2010 summer workshop had 64 participants and 34 presentations. Interfaces mark the boundaries of different material systems at which many interesting phenomena take place, thus making it extremely important to design, fabricate and analyse the structures of interfaces at both the atomic and macroscopic scale. For many applications, devices are prepared in the form of multi-layered thin films, with the result that interfaces are not exposed but buried under multiple layers. Because of such buried conditions, it is generally not easy to analyse such interfaces. In certain cases, for example, when the thin surface layer is not a solid but a liquid such as water, scientists can observe the atomic arrangement of the liquid-solid interface directly by using a scanning probe microscope, of which the tip is soaked in water. However, it has become clear that the use of a stylus tip positioned extremely close to the interface might change the structure of the water molecules. Therefore it is absolutely crucial to develop non-contact, non-destructive probes for buried interfaces. It is known that analysis using x-rays and neutrons is one of the most powerful tools for exploring near-surface structures including interfaces buried under several layers. In particular, x-ray analysis using 3rd

PREFACE: Preface

NASA Astrophysics Data System (ADS)

Luo, Qingming; Wang, Lihong V.; Tuchin, Valery V.

2011-02-01

)Ruey-Jen Sung, Stanford University (USA)A Dean Sherry, The University of Texas at Dallas (USA)Bruce Tromberg, University of California/Irvine (USA)Fujia Yang, Nottingham University (UK)Jianquan Yao, Tianjin University (China)Yixin Zeng, Sun Yat-sen University Cancer Center (China)Baoyong Zheng, Hua Wei Technologies Corporation, Inc (China) Program CommitteeWei R Chen, University of Central Oklahoma (USA)Zhongping Chen, University of California/Irvine (USA)Arthur Chiou, National Yang-Ming University (Taiwan, China)Frank Y S Chuang, University of California, Davis (USA)Zhihua Ding, Zhejiang University (China)Congwu Du, Brookhaven National Laboratory (USA)Stefan Haacke, Strasbourg University - IPCMS-DON (France)Weiping Han, Agency for Science, Technology and Research (A*STAR) (Singapore)Zheng Huang, University of Colorado Health Sciences Center (USA)Zhiwei Huang, National University of Singapore (Singapore)Steven L Jacques, Oregon Health & Science University (USA)Fu-Jen Kao, National Yang-Ming University (Taiwan, China)Hideaki Koizumi, Hitachi, Ltd (Japan)Xingde Li, Johns Hopkins University (USA)Yong-qing Li, East Carolina University (USA)Chengyi Liu, South China Normal University (China)Hong Liu, University of Oklahoma (USA)Zuhong Lu, Southeast University (China)Dennis L Matthews, University of California/Davis (USA)Avraham Mayevsky, Bar Ilan University (Israel)Stephen P Morgan, University of Nottingham (UK)Shoko Nioka, University of Pennsylvania (USA)Yingtian Pan, State University of New York at Stony Brook (USA)Alexander V Priezzhev, MV Lomonosov Moscow State University (Russia)Jianan Y Qu, The Hongkong University of Science and Technology (Hong Kong, China)Colin J R Sheppard, National University of Singapore (Singapore)Mamoru Tamura, Tsinghua University (China)Sergey Ulyanov, Saratov State University (Russia)Ruikang K Wang, Oregon Health & Science University (USA)Xunbin Wei, Fudan University (China)Da Xing, South China Normal University (China)Haishan Zeng, BC Cancer Research