Science.gov

Sample records for inelastic analysis acceptance

  1. In-situ soil carbon analysis using inelastic neutron scattering

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In situ soil carbon analysis using inelastic neutron scattering (INS) is based on the emission of 4.43 MeV gamma rays from carbon nuclei excited by fast neutrons. This in-situ method has excellent potential for easily measuring soil carbon since it does not require soil core sampling and processing ...

  2. Inelastic Strain Analysis of Solder Joint in NASA Fatigue Specimen

    NASA Technical Reports Server (NTRS)

    Dasgupta, Abhijit; Oyan, Chen

    1991-01-01

    The solder fatigue specimen designed by NASA-GSFC/UNISYS is analyzed in order to obtain the inelastic strain history during two different representative temperature cycles specified by UNISYS. In previous reports (dated July 25, 1990, and November 15, 1990), results were presented of the elastic-plastic and creep analysis for delta T = 31 C cycle, respectively. Subsequent results obtained during the current phase, from viscoplastic finite element analysis of the solder fatigue specimen for delta T = 113 C cycle are summarized. Some common information is repeated for self-completeness. Large-deformation continuum formulations in conjunction with a standard linear solid model is utilized for modeling the solder constitutive creep-plasticity behavior. Relevant material properties are obtained from the literature. Strain amplitudes, mean strains, and residual strains (as well as stresses) accumulated due to a representative complete temperature cycle are obtained as a result of this analysis. The partitioning between elastic strains, time-independent inelastic (plastic) strains, and time-dependent inelastic (creep) strains is also explicitly obtained for two representative cycles. Detailed plots are presented for two representative temperature cycles. This information forms an important input for fatigue damage models, when predicting the fatigue life of solder joints under thermal cycling

  3. Expert system for first order inelastic analysis of transmission towers

    SciTech Connect

    Miller, M.; Kempner, L. Jr. ); Mueller, W. III )

    1992-01-01

    The concept of an Expert System is not new. It has been around since the days of the early computers when scientists had dreams of robot automation to do everything from washing windows to automobile design. This paper discusses an application of an expert system and addresses software development issues and various levels of expert system development form a structural engineering viewpoint. An expert system designed to aid the structural engineer in first order inelastic analysis of latticed steel transmission powers is presented. The utilization of expert systems with large numerical analysis programs is discussed along with the software development of such a system.

  4. 3D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Dame, L. T.; Chen, P. C.; Hartle, M. S.; Huang, H. T.

    1985-01-01

    The objective is to develop analytical tools capable of economically evaluating the cyclic time dependent plasticity which occurs in hot section engine components in areas of strain concentration resulting from the combination of both mechanical and thermal stresses. Three models were developed. A simple model performs time dependent inelastic analysis using the power law creep equation. The second model is the classical model of Professors Walter Haisler and David Allen of Texas A and M University. The third model is the unified model of Bodner, Partom, et al. All models were customized for linear variation of loads and temperatures with all material properties and constitutive models being temperature dependent.

  5. The 3D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.; Maffeo, R. J.; Tipton, M. T.; Weber, G.

    1992-01-01

    A two-year program to develop advanced 3D inelastic structural stress analysis methods and solution strategies for more accurate and cost effective analysis of combustors, turbine blades, and vanes is described. The approach was to develop a matrix of formulation elements and constitutive models. Three constitutive models were developed in conjunction with optimized iterating techniques, accelerators, and convergence criteria within a framework of dynamic time incrementing. Three formulation models were developed: an eight-noded midsurface shell element; a nine-noded midsurface shell element; and a twenty-noded isoparametric solid element. A separate computer program has been developed for each combination of constitutive model-formulation model. Each program provides a functional stand alone capability for performing cyclic nonlinear structural analysis. In addition, the analysis capabilities incorporated into each program can be abstracted in subroutine form for incorporation into other codes or to form new combinations.

  6. On 3D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Mcknight, R. L.; Chen, P. C.; Dame, L. T.; Holt, R. V.; Huang, H.; Hartle, M.; Gellin, S.; Allen, D. H.; Haisler, W. E.

    1986-01-01

    Accomplishments are described for the 2-year program, to develop advanced 3-D inelastic structural stress analysis methods and solution strategies for more accurate and cost effective analysis of combustors, turbine blades and vanes. The approach was to develop a matrix of formulation elements and constitutive models. Three constitutive models were developed in conjunction with optimized iterating techniques, accelerators, and convergence criteria within a framework of dynamic time incrementing. Three formulations models were developed; an eight-noded mid-surface shell element, a nine-noded mid-surface shell element and a twenty-noded isoparametric solid element. A separate computer program was developed for each combination of constitutive model-formulation model. Each program provides a functional stand alone capability for performing cyclic nonlinear structural analysis. In addition, the analysis capabilities incorporated into each program can be abstracted in subroutine form for incorporation into other codes or to form new combinations.

  7. Micromechanical analysis of thermo-inelastic multiphase short-fiber composites

    NASA Technical Reports Server (NTRS)

    Aboudi, Jacob

    1994-01-01

    A micromechanical formulation is presented for the prediction of the overall thermo-inelastic behavior of multiphase composites which consist of short fibers. The analysis is an extension of the generalized method of cells that was previously derived for inelastic composites with continuous fibers, and the reliability of which was critically examined in several situations. The resulting three dimensional formulation is extremely general, wherein the analysis of thermo-inelastic composites with continuous fibers as well as particulate and porous inelastic materials are merely special cases.

  8. The 3D inelastic analysis methods for hot section components

    NASA Technical Reports Server (NTRS)

    Dame, L. T.; Mcknight, R. L.

    1983-01-01

    The objective of this research is to develop an analytical tool capable of economically evaluating the cyclic time dependent plasticity which occurs in hot section engine components in areas of strain concentration resulting from the combination of both mechanical and thermal stresses. The techniques developed must be capable of accommodating large excursions in temperatures with the associated variations in material properties including plasticity and creep. The overall objective of this proposed program is to develop advanced 3-D inelastic structural/stress analysis methods and solution strategies for more accurate and yet more cost effective analysis of combustors, turbine blades, and vanes. The approach will be to develop four different theories, one linear and three higher order with increasing complexities including embedded singularities.

  9. An inelastic analysis of a welded aluminum joint

    NASA Astrophysics Data System (ADS)

    Vaughan, Robert E.; Schonberg, William P.

    1995-02-01

    Butt weld joints are most commonly designed into pressure vessels by using weld material properties that are determined from a tensile test. These properties are provided to the stress analyst in the form of a stress vs strain diagram. Variations in properties through the thickness of the weld and along the width of the weld have been suspect but not explored because of inaccessibility and cost. The purpose of this study is to investigate analytical and computational methods used for analysis of multiple pass aluminum 2219-T87 butt welds. The weld specimens are analyzed using classical plasticity theory to provide a basis for modeling the inelastic properties in a finite element solution. The results of the analysis are compared to experimental data to determine the weld behavior and the accuracy of currently available numerical prediction methods.

  10. An inelastic analysis of a welded aluminum joint

    NASA Technical Reports Server (NTRS)

    Vaughan, R. E.

    1994-01-01

    Butt-weld joints are most commonly designed into pressure vessels which then become as reliable as the weakest increment in the weld chain. In practice, weld material properties are determined from tensile test specimen and provided to the stress analyst in the form of a stress versus strain diagram. Variations in properties through the thickness of the weld and along the width of the weld have been suspect but not explored because of inaccessibility and cost. The purpose of this study is to investigate analytical and computational methods used for analysis of welds. The weld specimens are analyzed using classical elastic and plastic theory to provide a basis for modeling the inelastic properties in a finite-element solution. The results of the analysis are compared to experimental data to determine the weld behavior and the accuracy of prediction methods. The weld considered in this study is a multiple-pass aluminum 2219-T87 butt weld with thickness of 1.40 in. The weld specimen is modeled using the finite-element code ABAQUS. The finite-element model is used to produce the stress-strain behavior in the elastic and plastic regimes and to determine Poisson's ratio in the plastic region. The value of Poisson's ratio in the plastic regime is then compared to experimental data. The results of the comparisons are used to explain multipass weld behavior and to make recommendations concerning the analysis and testing of welds.

  11. An inelastic analysis of a welded aluminum joint

    NASA Astrophysics Data System (ADS)

    Vaughan, R. E.

    1994-09-01

    Butt-weld joints are most commonly designed into pressure vessels which then become as reliable as the weakest increment in the weld chain. In practice, weld material properties are determined from tensile test specimen and provided to the stress analyst in the form of a stress versus strain diagram. Variations in properties through the thickness of the weld and along the width of the weld have been suspect but not explored because of inaccessibility and cost. The purpose of this study is to investigate analytical and computational methods used for analysis of welds. The weld specimens are analyzed using classical elastic and plastic theory to provide a basis for modeling the inelastic properties in a finite-element solution. The results of the analysis are compared to experimental data to determine the weld behavior and the accuracy of prediction methods. The weld considered in this study is a multiple-pass aluminum 2219-T87 butt weld with thickness of 1.40 in. The weld specimen is modeled using the finite-element code ABAQUS. The finite-element model is used to produce the stress-strain behavior in the elastic and plastic regimes and to determine Poisson's ratio in the plastic region. The value of Poisson's ratio in the plastic regime is then compared to experimental data. The results of the comparisons are used to explain multipass weld behavior and to make recommendations concerning the analysis and testing of welds.

  12. Analysis Method for Inelastic, Adhesively Bonded Joints with Anisotropic Adherends

    NASA Technical Reports Server (NTRS)

    Smeltzer, Stanley S., III; Klang, Eric C.

    2003-01-01

    A one-dimensional analysis method for evaluating adhesively bonded joints composed of anisotropic adherends and adhesives with nonlinear material behavior is presented in the proposed paper. The strain and resulting stress field in a general, bonded joint overlap are determined by using a variable-step, finite-difference solution algorithm to iteratively solve a system of first-order differential equations. Applied loading is given by a system of combined extensional, bending, and shear forces that are applied to the edge of the joint overlap. Adherends are assumed to behave as linear, cylindrically bent plates using classical laminated plate theory that includes the effects of first-order transverse shear deformation. Using the deformation theory of plasticity and a modified von-Mises yield criterion, inelastic material behavior is modeled in the adhesive layer. Results for the proposed method are verified against previous results from the literature and shown to be in excellent agreement. An additional case that highlights the effects of transverse shear deformation between similar adherends is also presented.

  13. Three dimensional inelastic finite element analysis of laminated composites

    NASA Technical Reports Server (NTRS)

    Griffin, O. H., Jr.; Kamat, M. P.

    1980-01-01

    Formulations of the inelastic response of laminated composites to thermal and mechanical loading are used as the basis for development of the computer NALCOM (Nonlinear Analysis of Laminated Composites) computer program which uses a fully three dimensional isoparametric finite element with 24 nodes and 72 degrees of freedom. An incremental solution is performed with nonlinearities introduced as pseudoloads computed for initial strains. Equilibrium iteration may be performed at every step. Elastic and elastic-plastic response of boron/epoxy and graphite/epoxy graphite/epoxy and problems of curing 0/90 sub s Gr/Ep laminates with and without circular holes are analyzed. Mechanical loading of + or - 45sub s Gr/Ep laminates is modeled and symmetry conditions which exist in angle-ply laminates are discussed. Results are compared to experiments and other analytical models when possible. All models are seen to agree reasonably well with experimetnal results for off-axis tensile coupons. The laminate analyses show the three dimensional effects which are present near holes and free corners.

  14. Experience with simplified inelastic analysis of piping designed for elevated temperature service

    SciTech Connect

    Severud, L.K.

    1980-03-01

    Screening rules and preliminary design of FFTF piping were developed in 1974 based on expected behavior and engineering judgment, approximate calculations, and a few detailed inelastic analyses of pipelines. This paper provides findings from six additional detailed inelastic analyses with correlations to the simplified analysis screening rules. In addition, simplified analysis methods for treating weldment local stresses and strains as well as fabrication induced flaws are described. Based on the FFTF experience, recommendations for future Code and technology work to reduce design analysis costs are identified.

  15. Evaluation of Inelastic Constitutive Models for Nonlinear Structural Analysis

    NASA Technical Reports Server (NTRS)

    Kaufman, A.

    1983-01-01

    The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which was subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic-kinematic, combined plus transient creep) were exercised. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a Strainrange Partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

  16. Modern Techniques for Inelastic Thermal Neutron Scattering Analysis

    NASA Astrophysics Data System (ADS)

    Hawari, A. I.

    2014-04-01

    A predictive approach based on ab initio quantum mechanics and/or classical molecular dynamics simulations has been formulated to calculate the scattering law, S(κ⇀,ω), and the thermal neutron scattering cross sections of materials. In principle, these atomistic methods make it possible to generate the inelastic thermal neutron scattering cross sections of any material and to accurately reflect the physical conditions of the medium (i.e, temperature, pressure, etc.). In addition, the generated cross sections are free from assumptions such as the incoherent approximation of scattering theory and, in the case of solids, crystalline perfection. As a result, new and improved thermal neutron scattering data libraries have been generated for a variety of materials. Among these are materials used for reactor moderators and reflectors such as reactor-grade graphite and beryllium (including the coherent inelastic scattering component), silicon carbide, cold neutron media such as solid methane, and neutron beam filters such as sapphire and bismuth. Consequently, it is anticipated that the above approach will play a major role in providing the nuclear science and engineering community with its needs of thermal neutron scattering data especially when considering new materials where experimental information may be scarce or nonexistent.

  17. Implications of stress range for inelastic analysis. [CRBRP flued head containment penetration

    SciTech Connect

    Karabin, M.E.; Dhalla, A.K.

    1981-01-01

    The elastic stress range over a complete load cycle is routinely used to formulate simplified rules regarding the inelastic behavior of structures operating at elevated temperature. For example, a 300 series stainless steel structure operating at elevated temperature, in all probability, would satisfy the ASME Boiler and Pressure Vessel Code criteria if the linearized elastic stress range is less than three times the material yield strength. However, at higher elastic stress ranges it is difficult to judge, a priori, that a structural component would comply with inelastic Code criteria after a detailed inelastic analysis. The purpose of this paper is to illustrate that it is not the elastic stress range but the stress intensities at specific times during a thermal transient which provide a better insight into the inelastic response of the structure. The specific example of the CRBRP flued head design demonstrates that the temperature differential between various parts of the structure can be changed by modifying the insulation pattern and heat flow path in the structure, without significantly altering the elastic stress range over a complete load cycle. However, the modified design did reduce the stress intensity during steady state elevated temperature operation. This modified design satisfied the inelastic Code criteria whereas the initial design failed to comply with the strain accumulation criterion.

  18. High speed video analysis study of elastic and inelastic collisions

    NASA Astrophysics Data System (ADS)

    Baker, Andrew; Beckey, Jacob; Aravind, Vasudeva; Clarion Team

    We study inelastic and elastic collisions with a high frame rate video capture to study the process of deformation and other energy transformations during collision. Snapshots are acquired before and after collision and the dynamics of collision are analyzed using Tracker software. By observing the rapid changes (over few milliseconds) and slower changes (over few seconds) in momentum and kinetic energy during the process of collision, we study the loss of momentum and kinetic energy over time. Using this data, it could be possible to design experiments that reduce error involved in these experiments, helping students build better and more robust models to understand the physical world. We thank Clarion University undergraduate student grant for financial support involving this project.

  19. Hot background” of the mobile inelastic neutron scattering system for soil carbon analysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The problem of gamma spectrum peaks identification arises when conducting soil carbon (and other elements) analysis using the mobile inelastic neutron scattering (MINS) system. Some gamma spectrum peaks could be associated with radioisotopes appearing due to neutron activation of both the MINS syste...

  20. Numerical nonlinear inelastic analysis of stiffened shells of revolution. Volume 1: Theory manual for STARS-2P digital computer program

    NASA Technical Reports Server (NTRS)

    Svalbonas, V.; Levine, H.

    1975-01-01

    The theoretical analysis background for the STARS-2P nonlinear inelastic program is discussed. The theory involved is amenable for the analysis of large deflection inelastic behavior in axisymmetric shells of revolution subjected to axisymmetric loadings. The analysis is capable of considering such effects as those involved in nonproportional and cyclic loading conditions. The following are also discussed: orthotropic nonlinear kinematic hardening theory; shell wall cross sections and discrete ring stiffeners; the coupled axisymmetric large deflection elasto-plastic torsion problem; and the provision for the inelastic treatment of smeared stiffeners, isogrid, and waffle wall constructions.

  1. Inelastic and Dynamic Fracture and Stress Analyses

    NASA Technical Reports Server (NTRS)

    Atluri, S. N.

    1984-01-01

    Large deformation inelastic stress analysis and inelastic and dynamic crack propagation research work is summarized. The salient topics of interest in engine structure analysis that are discussed herein include: (1) a path-independent integral (T) in inelastic fracture mechanics, (2) analysis of dynamic crack propagation, (3) generalization of constitutive relations of inelasticity for finite deformations , (4) complementary energy approaches in inelastic analyses, and (5) objectivity of time integration schemes in inelastic stress analysis.

  2. "Hot background" of the mobile inelastic neutron scattering system for soil carbon analysis.

    PubMed

    Kavetskiy, Aleksandr; Yakubova, Galina; Prior, Stephen A; Torbert, H Allen

    2016-01-01

    The problem of gamma spectrum peak identification arises when conducting soil carbon analysis using the inelastic neutron scattering (INS) system. Some spectral peaks could be associated with radioisotopes appearing due to neutron activation of both the measurement system and soil samples. The investigation of "hot background" gamma spectra from the construction materials, whole measurement system, and soil samples over time showed that activation of (28)Al isotope can contribute noticeable additions to the soil neutron stimulated gamma spectra. PMID:26595773

  3. Acceptance of dying: a discourse analysis of palliative care literature.

    PubMed

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die. PMID:22513246

  4. Inelastic Stability Analysis Of Uniaxially Compressed Flat Rectangular Isotropic CCSS Plate

    NASA Astrophysics Data System (ADS)

    Ibearugbulem, O. M.; Eziefula, U. G.; Onwuka, D. O.

    2015-08-01

    This study investigates the inelastic stability of a thin flat rectangular isotropic plate subjected to uniform uniaxial compressive loads using Taylor-Maclaurin series formulated deflection function. The plate has clamped and simply supported edges in both characteristic directions (CCSS boundary conditions). The governing equation is derived using a deformation plasticity theory and a work principle. Values of the plate buckling coefficient are calculated for aspect ratios from 0.1 to 2.0 at intervals of 0.1. The results compared favourably with the elastic stability values and the percentage differences ranged from -0.353% to -7.427%. Therefore, the theoretical approach proposed in this study is recommended for the inelastic stability analysis of thin flat rectangular isotropic plates under uniform in-plane compression.

  5. On 3-D inelastic analysis methods for hot section components (base program)

    NASA Technical Reports Server (NTRS)

    Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

    1986-01-01

    A 3-D Inelastic Analysis Method program is described. This program consists of a series of new computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of: (1) combustor liners, (2) turbine blades, and (3) turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain)and global (dynamics, buckling) structural behavior of the three selected components. Three computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (Marc-Hot Section Technology), and BEST (Boundary Element Stress Technology), have been developed and are briefly described in this report.

  6. 3-D inelastic analysis methods for hot section components. Volume 2: Advanced special functions models

    NASA Technical Reports Server (NTRS)

    Wilson, R. B.; Banerjee, P. K.

    1987-01-01

    This Annual Status Report presents the results of work performed during the third year of the 3-D Inelastic Analysis Methods for Hot Sections Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of computer codes that permit more accurate and efficient three-dimensional analyses of selected hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The computer codes embody a progression of mathematical models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components.

  7. Stakeholder acceptance analysis ResonantSonic drilling

    SciTech Connect

    Peterson, T.

    1995-12-01

    This report presents evaluations, recommendations, and requirements concerning ResonantSonic Drilling (Sonic Drilling), derived from a three-year program of stakeholder involvement. Sonic Drilling is an innovative method to reach contamination in soil and groundwater. The resonant sonic drill rig uses counter-rotating weights to generate energy, which causes the drill pipe to vibrate elastically along its entire length. In the resonant condition, forces of up to 200,000 pounds are transmitted to the drill bit face to create a cutting action. The resonant energy causes subsurface materials to move back into the adjacent formation, permitting the drill pipe to advance. This report is for technology developers and those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders` perspectives help those responsible for technology deployment to make good decisions concerning the acceptability and applicability of sonic drilling to the remediation problems they face.

  8. Stakeholder acceptance analysis: Tunable hybrid plasma

    SciTech Connect

    Peterson, T.

    1995-12-01

    This report resents evaluations, recommendations, and requirements concerning Tunable Hybrid Plasma (THP) derived from a three-year program of stake holder involvement. THP destroys volatile organic compounds by directing a moderate energy electron beam into a flow of air containing organic contaminants. This report is for technology developers and for those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders` perspectives help those responsible for technology deployment make good decisions concerning the acceptability and applicability of THP to the remediation problems the face. In addition, this report presents data requirements for the technology`s field demonstration defined by stakeholders associated with the Hanford site in Washington State, as well as detailed comments on THP from stakeholders from four other sites throughout the western United States.

  9. Dimensional analysis of earthquake-induced pounding between adjacent inelastic MDOF buildings

    NASA Astrophysics Data System (ADS)

    Zhai, Changhai; Jiang, Shan; Li, Shuang; Xie, Lili

    2015-06-01

    In this study the seismic pounding response of adjacent multi-degree-of-freedom (MDOF) buildings with bilinear inter-story resistance characteristics is investigated through dimensional analysis. The application of dimensional analysis leads to a condensed presentation of the response, and the remarkable self-similarity property for bilinear MDOF buildings with inelastic collision is uncovered. It is shown that when the response is expressed in the appropriate dimensionless form, response spectra for any intensity of the excitation collapse to a single master curve. The reduced Π set explicitly describes the interaction between the colliding structures. The effect of pounding on the MDOF building's response is illustrated using three well-divided spectral regions (amplified, de-amplified and unaffected regions). Parametric studies are conducted to investigate the effects of the story stiffness of structures, the story stiffness ratio and mass ratio of adjacent buildings, the structural inelastic characteristics and the gap size values. Results show that (i) the influence of system stiffness ratio to the lighter and more flexible building is more significant in the first spectral region, where the maximum response of the building is amplified because of pounding; and (ii) the velocity and pounding force of the heavier and stiffer building is unexpectedly sensitive to the mass ratio of adjacent buildings.

  10. General-mass treatment for deep inelastic scattering at NNLO in CTEQ PDF analysis

    NASA Astrophysics Data System (ADS)

    Guzzi, Marco; Lai, Hung-Liang; Nadolsky, Pavel M.; Yuan, C.-P.

    2011-10-01

    We present an NNLO realization of the general mass scheme S-ACOT-χ for the treatment of heavy-flavour production in neutral current deep-inelastic scattering. Practical implementation of the NNLO calculation is illustrated on the example of semi-inclusive structure functions F2c(x,Q) and FLc(x,Q). In a modern global QCD analysis of parton distribution functions (PDFs), several factors are comparable in magnitude to next-to-next-to-leading order (NNLO) radiative contributions in the QCD coupling strength αs. Among these factors, dependence of QCD cross sections on masses of heavy quarks, mc and mb, can be significant. Global fits are sensitive to two types of mass effects, kinematical suppression of production of c and b quarks near respective mass thresholds in deep inelastic scattering (DIS), and large radiative contributions to collinear production of c c or bb pairs at large collider energy. It is therefore natural to evaluate all fitted cross sections in a ``general-mass'' (GM) factorization scheme, which assumes that the number of (nearly) massless quark flavors varies with energy, and at the same time includes dependence on heavy-quark masses in relevant kinematical regions. The S-ACOT-χ scheme that we present, is motivated by the QCD factorization theorem for DIS with massive quarks and we show it is valid to all orders of αs.

  11. Event shape analysis of deep inelastic scattering events with a large rapidity gap at HERA

    NASA Astrophysics Data System (ADS)

    ZEUS Collaboration; Breitweg, J.; Derrick, M.; Krakauer, D.; Magill, S.; Mikunas, D.; Musgrave, B.; Repond, J.; Stanek, R.; Talaga, R. L.; Yoshida, R.; Zhang, H.; Mattingly, M. C. K.; Anselmo, F.; Antonioli, P.; Bari, G.; Basile, M.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Cara Romeo, G.; Castellini, G.; Cifarelli, L.; Cindolo, F.; Contin, A.; Corradi, M.; de Pasquale, S.; Gialas, I.; Giusti, P.; Iacobucci, G.; Laurenti, G.; Levi, G.; Margotti, A.; Massam, T.; Nania, R.; Palmonari, F.; Pesci, A.; Polini, A.; Ricci, F.; Sartorelli, G.; Zamora Garcia, Y.; Zichichi, A.; Amelung, C.; Bornheim, A.; Brock, I.; Coböken, K.; Crittenden, J.; Deffner, R.; Eckert, M.; Grothe, M.; Hartmann, H.; Heinloth, K.; Heinz, L.; Hilger, E.; Jakob, H.-P.; Katz, U. F.; Kerger, R.; Paul, E.; Pfeiffer, M.; Rembser, Ch.; Stamm, J.; Wedemeyer, R.; Wieber, H.; Bailey, D. S.; Campbell-Robson, S.; Cottingham, W. N.; Foster, B.; Hall-Wilton, R.; Hayes, M. E.; Heath, G. P.; Heath, H. F.; McFall, J. D.; Piccioni, D.; Roff, D. G.; Tapper, R. J.; Arneodo, M.; Ayad, R.; Capua, M.; Garfagnini, A.; Iannotti, L.; Schioppa, M.; Susinno, G.; Kim, J. Y.; Lee, J. H.; Lim, I. T.; Pac, M. Y.; Caldwell, A.; Cartiglia, N.; Jing, Z.; Liu, W.; Mellado, B.; Parsons, J. A.; Ritz, S.; Sampson, S.; Sciulli, F.; Straub, P. B.; Zhu, Q.; Borzemski, P.; Chwastowski, J.; Eskreys, A.; Figiel, J.; Klimek, K.; Przybycień , M. B.; Zawiejski, L.; Adamczyk, L.; Bednarek, B.; Bukowy, M.; Jeleń , K.; Kisielewska, D.; Kowalski, T.; Przybycień , M.; Rulikowska-Zarȩ Bska, E.; Suszycki, L.; Zaja C, J.; Duliń Ski, Z.; Kotań Ski, A.; Abbiendi, G.; Bauerdick, L. A. T.; Behrens, U.; Beier, H.; Bienlein, J. K.; Cases, G.; Deppe, O.; Desler, K.; Drews, G.; Fricke, U.; Gilkinson, D. J.; Glasman, C.; Göttlicher, P.; Haas, T.; Hain, W.; Hasell, D.; Johnson, K. F.; Kasemann, M.; Koch, W.; Kötz, U.; Kowalski, H.; Labs, J.; Lindemann, L.; Löhr, B.; Löwe, M.; Mań Czak, O.; Milewski, J.; Monteiro, T.; Ng, J. S. T.; Notz, D.; Ohrenberg, K.; Park, I. H.; Pellegrino, A.; Pelucchi, F.; Piotrzkowski, K.; Roco, M.; Rohde, M.; Roldán, J.; Ryan, J. J.; Savin, A. A.; Schneekloth, U.; Selonke, F.; Surrow, B.; Tassi, E.; Voß, T.; Westphal, D.; Wolf, G.; Wollmer, U.; Youngman, C.; Zsolararnecki, A. F.; Zeuner, W.; Burow, B. D.; Grabosch, H. J.; Meyer, A.; Schlenstedt, S.; Barbagli, G.; Gallo, E.; Pelfer, P.; Maccarrone, G.; Votano, L.; Bamberger, A.; Eisenhardt, S.; Markun, P.; Trefzger, T.; Wölfle, S.; Bromley, J. T.; Brook, N. H.; Bussey, P. J.; Doyle, A. T.; MacDonald, N.; Saxon, D. H.; Sinclair, L. E.; Strickland, E.; Waugh, R.; Bohnet, I.; Gendner, N.; Holm, U.; Meyer-Larsen, A.; Salehi, H.; Wick, K.; Gladilin, L. K.; Horstmann, D.; Kçira, D.; Klanner, R.; Lohrmann, E.; Poelz, G.; Schott, W.; Zetsche, F.; Bacon, T. C.; Butterworth, I.; Cole, J. E.; Howell, G.; Hung, B. H. Y.; Lamberti, L.; Long, K. R.; Miller, D. B.; Pavel, N.; Prinias, A.; Sedgbeer, J. K.; Sideris, D.; Walker, R.; Mallik, U.; Wang, S. M.; Wu, J. T.; Cloth, P.; Filges, D.; Fleck, J. I.; Ishii, T.; Kuze, M.; Suzuki, I.; Tokushuku, K.; Yamada, S.; Yamauchi, K.; Yamazaki, Y.; Hong, S. J.; Lee, S. B.; Nam, S. W.; Park, S. K.; Barreiro, F.; Fernández, J. P.; García, G.; Graciani, R.; Hernández, J. M.; Hervás, L.; Labarga, L.; Martínez, M.; del Peso, J.; Puga, J.; Terrón, J.; de Trocóniz, J. F.; Corriveau, F.; Hanna, D. S.; Hartmann, J.; Hung, L. W.; Murray, W. N.; Ochs, A.; Riveline, M.; Stairs, D. G.; St-Laurent, M.; Ullmann, R.; Tsurugai, T.; Bashkirov, V.; Dolgoshein, B. A.; Stifutkin, A.; Bashindzhagyan, G. L.; Ermolov, P. F.; Golubkov, Yu. A.; Khein, L. A.; Korotkova, N. A.; Korzhavina, I. A.; Kuzmin, V. A.; Lukina, O. Yu.; Proskuryakov, A. S.; Shcheglova, L. M.; Solomin, A. N.; Zotkin, S. A.; Bokel, C.; Botje, M.; Brümmer, N.; Chlebana, F.; Engelen, J.; Koffeman, E.; Kooijman, P.; van Sighem, A.; Tiecke, H.; Tuning, N.; Verkerke, W.; Vossebeld, J.; Vreeswijk, M.; Wiggers, L.; de Wolf, E.; Acosta, D.; Bylsma, B.; Durkin, L. S.; Gilmore, J.; Ginsburg, C. M.; Kim, C. L.; Ling, T. Y.; Nylander, P.; Romanowski, T. A.; Blaikley, H. E.; Cashmore, R. J.; Cooper-Sarkar, A. M.; Devenish, R. C. E.; Edmonds, J. K.; Große-Knetter, J.; Harnew, N.; Nath, C.; Noyes, V. A.; Quadt, A.; Ruske, O.; Tickner, J. R.; Uijterwaal, H.; Walczak, R.; Waters, D. S.; Bertolin, A.; Brugnera, R.; Carlin, R.; dal Corso, F.; Dosselli, U.; Limentani, S.; Morandin, M.; Posocco, M.; Stanco, L.; Stroili, R.; Voci, C.; Bulmahn, J.; Oh, B. Y.; Okrasiń Ski, J. R.; Toothacker, W. S.; Whitmore, J. J.; Iga, Y.; D'Agostini, G.; Marini, G.; Nigro, A.; Raso, M.; Hart, J. C.; McCubbin, N. A.; Shah, T. P.; Epperson, D.; Heusch, C.; Rahn, J. T.; Sadrozinski, H. F.-W.; Seiden, A.; Wichmann, R.; Williams, D. C.; Schwarzer, O.; Walenta, A. H.; Abramowicz, H.; Briskin, G.; Dagan, S.; Kananov, S.; Levy, A.; Abe, T.; Fusayasu, T.; Inuzuka, M.; Nagano, K.; Umemori, K.; Yamashita, T.; Hamatsu, R.; Hirose, T.; Homma, K.; Kitamura, S.; Matsushita, T.; Cirio, R.; Costa, M.; Ferrero, M. I.; Maselli, S.; Monaco, V.; Peroni, C.; Petrucci, M. C.; Ruspa, M.; Sacchi, R.; Solano, A.; Staiano, A.; Dardo, M.; Bailey, D. C.; Fagerstroem, C.-P.; Galea, R.; Hartner, G. F.; Joo, K. K.; Levman, G. M.; Martin, J. F.; Orr, R. S.; Polenz, S.; Sabetfakhri, A.; Simmons, D.; Teuscher, R. J.; Butterworth, J. M.; Catterall, C. D.; Jones, T. W.; Lane, J. B.; Saunders, R. L.; Sutton, M. R.; Wing, M.; Ciborowski, J.; Grzelak, G.; Kasprzak, M.; Muchorowski, K.; Nowak, R. J.; Pawlak, J. M.; Pawlak, R.; Tymieniecka, T.; Wróblewski, A. K.; Zakrzewski, J. A.; Adamus, M.; Coldewey, C.; Eisenberg, Y.; Hochman, D.; Karshon, U.; Badgett, W. F.; Chapin, D.; Cross, R.; Dasu, S.; Foudas, C.; Loveless, R. J.; Mattingly, S.; Reeder, D. D.; Smith, W. H.; Vaiciulis, A.; Wodarczyk, M.; Deshpande, A.; Dhawan, S.; Hughes, V. W.; Bhadra, S.; Frisken, W. R.; Khakzad, M.; Schmidke, W. B.

    1998-03-01

    A global event shape analysis of the multihadronic final states observed in neutral current deep inelastic scattering events with a large rapidity gap with respect to the proton direction is presented. The analysis is performed in the range 5<=Q2<=185 GeV2 and 160<=W<=250 GeV, where Q2 is the virtuality of the photon and W is the virtual-photon proton centre of mass energy. Particular emphasis is placed on the dependence of the shape variables, measured in the γ*-pomeron rest frame, on the mass of the hadronic final state, MX. With increasing MX the multihadronic final state becomes more collimated and planar. The experimental results are compared with several models which attempt to describe diffractive events. The broadening effects exhibited by the data require in these models a significant gluon component of the pomeron.

  12. Advanced methods for 3-D inelastic structural analysis for hot engine structures

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.

    1989-01-01

    Three-dimensional Inelastic Analysis Methods are described. These methods were incorporated into a series of new computer codes embodying a progression of mathematical models (mechanics of materials, specialty finite element, boundary element) for streamlined analysis of hot engine structures such as: (1) combustor liners, (2) turbine blades, and (3) turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (displacements, frequencies, amplitudes, buckling) structural behavior of the three respective components. The methods and the three computer codes, referred to as MOMM (Mechanics Of Materials Model), MHOST (MARC-Hot Section Technology), and BEST3D (Boundary Element Stress Technology), have been developed and are briefly described.

  13. On 3-D inelastic analysis methods for hot section components. Volume 1: Special finite element models

    NASA Technical Reports Server (NTRS)

    Nakazawa, S.

    1988-01-01

    This annual status report presents the results of work performed during the fourth year of the 3-D Inelastic Analysis Methods for Hot Section Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of new computer codes permitting more accurate and efficient 3-D analysis of selected hot section components, i.e., combustor liners, turbine blades and turbine vanes. The computer codes embody a progression of math models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components. Volume 1 of this report discusses the special finite element models developed during the fourth year of the contract.

  14. On 3-D inelastic analysis methods for hot section components. Volume 1: Special finite element models

    NASA Technical Reports Server (NTRS)

    Nakazawa, S.

    1987-01-01

    This Annual Status Report presents the results of work performed during the third year of the 3-D Inelastic Analysis Methods for Hot Section Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of new computer codes that permit more accurate and efficient three-dimensional analysis of selected hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The computer codes embody a progression of mathematical models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components. This report is presented in two volumes. Volume 1 describes effort performed under Task 4B, Special Finite Element Special Function Models, while Volume 2 concentrates on Task 4C, Advanced Special Functions Models.

  15. Simplified inelastic analysis procedure to evaluate a butt-welded elbow end

    SciTech Connect

    Dhalla, A.K.

    1981-01-01

    In a thin-walled piping network, the end of an elbow welded to a straignt pipe constitutes one of the highly stressed cross-sections that require structural evaluation. Explicit rules are not provided in the ASME Code for structural evaluation of the elbow ovalization and fabrication effects at the welded end. This paper presents a conservative semi-analytical procedure that can be used with simplified inelastic analysis to evaluate the elbow cross section welded to the straight pipe. The concept of carry-over factors is used to obtain ovalization stresses or strains at the elbow end. The stresses introduced by material and geometric nonuniformities in the fabrication process are then added to the ovalization stresses to complete structural evluation of the girth butt-welded elbow joint.

  16. Phenomenological analysis of azimuthal asymmetries in unpolarized semi-inclusive deep inelastic scattering

    NASA Astrophysics Data System (ADS)

    Barone, V.; Boglione, M.; Gonzalez Hernandez, J. O.; Melis, S.

    2015-04-01

    We present a phenomenological analysis of the cos ϕ and cos 2 ϕ asymmetries in unpolarized semi-inclusive deep inelastic scattering, based on the recent multidimensional data released by the COMPASS and HERMES collaborations. In the transverse-momentum-dependent framework, valid at relatively low transverse momenta, these asymmetries arise from intrinsic transverse momentum and transverse spin effects, and from their correlations. The role of the Cahn and Boer-Mulders effects in both azimuthal moments is explored up to order 1 /Q . As the kinematics of the present experiments is dominated by the low-Q2 region, higher-twist contributions turn out to be important, affecting the results of our fits.

  17. Inelastic, nonlinear analysis of stiffened shells of revolution by numerical integration

    NASA Technical Reports Server (NTRS)

    Levine, H. S.; Svalbonas, V.

    1974-01-01

    This paper describes the latest addition to the STARS system of computer programs, STARS-2P, for the plastic, large deflection analysis of axisymmetrically loaded shells of revolution. The STARS system uses a numerical integration scheme to solve the governing differential equations. Several unique features for shell of revolution programs that are included in the STARS-2P program are described. These include orthotropic nonlinear kinematic hardening theory, a variety of shell wall cross sections and discrete ring stiffeners, cyclic and nonproportional mechanical and thermal loading capability, the coupled axisymmetric large deflection elasto-plastic torsion problem, an extensive restart option, arbitrary branching capability, and the provision for the inelastic treatment of smeared stiffeners, isogrid, and waffle wall constructions. To affirm the validity of the results, comparisons with available theoretical and experimental data are presented.

  18. On local total strain redistribution using a simplified cyclic inelastic analysis based on an elastic solution

    NASA Technical Reports Server (NTRS)

    Hwang, S. Y.; Kaufman, A.

    1985-01-01

    Strain redistribution corrections were developed for a simplified inelastic analysis procedure to economically calculate material cyclic response at the critical location of a structure for life prediction purposes. The method was based on the assumption that the plastic region in the structure is local and the total strain history required for input can be defined from elastic finite element analyses. Cyclic stress-strain behavior was represented by a bilinear kinematic hardening model. The simplified procedure has been found to predict stress-strain response with reasonable accuracy for thermally cycled problems but needs improvement for mechanically load cycled problems. This study derived and incorporated Neuber type corrections in the simplified procedure to account for local total strain redistribution under cyclic mechanical loading. The corrected simplified method was exercised on a mechanically load cycled benchmark notched plate problem. Excellent agreement was found between the predicted material response and nonlinear finite element solutions for the problem. The simplified analysis computer program used 0.3 percent of the CPU time required for a nonlinear finite element analysis.

  19. QCD analysis of neutrino charged current structure function F2 in deep inelastic scattering

    NASA Technical Reports Server (NTRS)

    Aleem, F.; Saleem, M.

    1985-01-01

    An analytic expression for the neutrino charged current structure function F sub 2 (x, Q sup 2) in deep inelastic scattering, consistent with quantum chromodynamics, is proposed. The calculated results are in good agreement with experiment.

  20. Analysis of inelastic x-ray scattering spectra of low-temperature water

    PubMed

    Liao; Chen; Sette

    2000-02-01

    We analyze a set of high-resolution inelastic x-ray scattering (IXS) spectra from H2O measured at T=259, 273, and 294 K using two different phenomenological models. Model I, called the "dynamic cage model," combines the short time in-cage dynamics described by a generalized Enskog kinetic theory with a long-time cage relaxation dynamics described by an alpha relaxation. This model is appropriate for supercooled water where the cage effect is dominant and the existence of an alpha relaxation is evident from molecular-dynamics (MD) simulation data of extended simple point charge (SPC/E) model water. Model II is essentially a generalized hydrodynamic theory called the "three effective eigenmode theory" by de Schepper et al. 11. This model is appropriate for normal liquid water where the cage effect is less prominent and there is no evidence of the alpha relaxation from the MD data. We use the model I to analyze IXS data at T=259 K (supercooled water). We successfully extract the Debye-Waller factor, the cage relaxation time from the long-time dynamics, and the dispersion relation of high-frequency sound from the short time dynamics. We then use the model II to analyze IXS data at all three temperatures, from which we are able to extract the relaxation rate of the central mode and the damping of the sound mode as well as the dispersion relation for the high-frequency sound. It turns out that the dispersion relations extracted from the two models at their respective temperatures agree with each other giving the high-frequency sound speed of 2900+/-300 m/s. This is to be compared with a slightly higher value reported previously, 3200+/-320 m/s, by analyzing similar IXS data with a phenomenological-damped harmonic oscillator model 22. This latter model has traditionally been used exclusively for the analysis of inelastic scattering spectra of water. The k-dependent sound damping and central mode relaxation rate extracted from our model analyses are compared with the known

  1. 3-D inelastic analysis methods for hot section components (base program). [turbine blades, turbine vanes, and combustor liners

    NASA Technical Reports Server (NTRS)

    Wilson, R. B.; Bak, M. J.; Nakazawa, S.; Banerjee, P. K.

    1984-01-01

    A 3-D inelastic analysis methods program consists of a series of computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of combustor liners, turbine blades, and turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (dynamics, buckling) structural behavior of the three selected components. These models are used to solve 3-D inelastic problems using linear approximations in the sense that stresses/strains and temperatures in generic modeling regions are linear functions of the spatial coordinates, and solution increments for load, temperature and/or time are extrapolated linearly from previous information. Three linear formulation computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (MARC-Hot Section Technology), and BEST (Boundary Element Stress Technology), were developed and are described.

  2. The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 2: User's manual

    NASA Technical Reports Server (NTRS)

    Nakazawa, Shohei

    1989-01-01

    The user options available for running the MHOST finite element analysis package is described. MHOST is a solid and structural analysis program based on the mixed finite element technology, and is specifically designed for 3-D inelastic analysis. A family of 2- and 3-D continuum elements along with beam and shell structural elements can be utilized, many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. The outline of solution algorithms is discussed along with the data input and output, analysis options including the user subroutines and the definition of the finite elements implemented in the program package.

  3. The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 3: Systems' manual

    NASA Technical Reports Server (NTRS)

    Nakazawa, Shohei

    1989-01-01

    The internal structure is discussed of the MHOST finite element program designed for 3-D inelastic analysis of gas turbine hot section components. The computer code is the first implementation of the mixed iterative solution strategy for improved efficiency and accuracy over the conventional finite element method. The control structure of the program is covered along with the data storage scheme and the memory allocation procedure and the file handling facilities including the read and/or write sequences.

  4. Factor analysis and advanced inelastic background analysis in XPS: Unraveling time dependent contamination growth on multilayers and thin films

    NASA Astrophysics Data System (ADS)

    Gusenleitner, S.; Hauschild, D.; Graber, T.; Ehm, D.; Tougaard, S.; Reinert, F.

    2013-10-01

    In order to follow and understand time dependent contamination growth on multilayer mirrors for extreme ultraviolet (EUV) lithography applications, particular heterosystems were investigated with X-ray Photoemission Spectroscopy (XPS). Diverse capping layers can be used to terminate EUV multilayer mirrors to protect the underlying multilayer stack, e.g. Ru metal. In XPS problems were encountered when analyzing spectra as the core-level signals of Ru and C overlap. Further, Ru was not only present as pure metal, but also in its oxidized state. Disentangling the overlapping XPS spectra was achieved by application of factor analysis (FA) yielding not only the spectra of each component but also the according weights. Thus a model for the time dependent contamination growth was developed. This model was cross checked by advanced inelastic background analysis. Both methods displayed a way to unravel overlapping data sets and for deducing multilayer composition models.

  5. 105 K East isolation barrier acceptance analysis report

    SciTech Connect

    McCracken, K.J.; Irwin, J.J.

    1995-05-31

    The objective of this document is to report and interpret the findings of the isolation barrier acceptance tests performed in 105KE/100K. The tests were performed in accordance with the test plan (McCracken 1995c) and acceptance test procedure (McCracken 1995a). The test report (McCracken 1995b) contains the test data. This document compares the test data (McCracken 1995b) against the criteria (McCracken 1995a, c). A discussion of the leak rate analytical characterization (Irwin 1995) describes how the flow characteristics and the flow rate will be determined using the test data from the test report (McCracken 1995b). The barriers must adequately control the leakage from the main basin to the discharge chute to less than the 1,500 gph (5,680 lph) Safety Analysis Report (SAR 1994) limit.

  6. Application of Geant4 simulation for analysis of soil carbon inelastic neutron scattering measurements

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Inelastic neutron scattering (INS) was applied to determine soil carbon content. Due to non-uniform soil carbon depth distribution, the correlation between INS signals with some soil carbon content parameter is not obvious; however, a proportionality between INS signals and average carbon weight per...

  7. Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis

    NASA Technical Reports Server (NTRS)

    Kaufman, A.; Hwang, S. Y.

    1985-01-01

    Strain redistribution corrections were developed for a simplified inelastic analysis procedure to economically calculate material cyclic response at the critical location of a structure for life prediction proposes. The method was based on the assumption that the plastic region in the structure is local and the total strain history required for input can be defined from elastic finite-element analyses. Cyclic stress-strain behavior was represented by a bilinear kinematic hardening model. The simplified procedure predicts stress-strain response with reasonable accuracy for thermally cycled problems but needs improvement for mechanically load-cycled problems. Neuber-type corrections were derived and incorporated in the simplified procedure to account for local total strain redistribution under cyclic mechanical loading. The corrected simplified method was used on a mechanically load-cycled benchmark notched-plate problem. The predicted material response agrees well with the nonlinear finite-element solutions for the problem. The simplified analysis computer program was 0.3% of the central processor unit time required for a nonlinear finite-element analysis.

  8. Toward a QCD analysis of jet rates in deep-inelastic Muon-Proton scattering

    SciTech Connect

    Salgado, C.W.; E665 Collaboration

    1993-08-01

    Measurements of multi-jet production rates in deep-inelastic Muon-Proton scattering at Fermilab-E665 are presented. Jet rates defined by the JADE clustering algorithm are compared to perturbative Quantum chromodynamics (PQCD) and different Monte Carlo model predictions. The applicability of the jet-parton duality hypothesis is studied. We obtain hadronic jet rates which are approximately a factor of two higher than PQCD predictions at the parton level. Possible causes for this discrepancy are discussed.

  9. Analysis of inelastic neutron scattering spectra from a time-of-flight spectrometer with filter detector

    SciTech Connect

    Vorderwisch, P.; Mezei, F.; Eckert, J.; Goldstone, J.A.

    1986-01-01

    Inelastic neutron scattering spectra obtained from time-of-flight spectrometers with filter detector suffer in energy resolution from a long time-of-flight tail in the filter response function. A mathematical method is described which removes this tail in measured spectra. The energy resolution can thereby be adapted for each part of the spectrum. Applications of the method to data taken at the LANSCE pulsed spallation source are presented.

  10. A systematic halo-independent analysis of direct detection data within the framework of Inelastic Dark Matter

    SciTech Connect

    Scopel, Stefano; Yoon, Kook-Hyun E-mail: koreasds@naver.com

    2014-08-01

    We present a systematic halo-independent analysis of available Weakly Interacting Massive Particles (WIMP) direct detection data within the framework of Inelastic Dark Matter (IDM). We show that, when the smallest number of assumptions is made on the WIMP velocity distribution in the halo of our Galaxy, it is possible to find values of the WIMP mass and the IDM mass splitting for which compatibility between present constraints and any of the three experiments claiming to see a WIMP excess among DAMA, CDMS-Si and CRESST can be achieved.

  11. Absolute determination of inelastic mean-free paths and surface excitation parameters by absolute reflection electron energy loss spectrum analysis

    NASA Astrophysics Data System (ADS)

    Nagatomi, T.; Goto, K.

    2005-11-01

    An analytical approach was proposed for simultaneously determining an inelastic mean-free path (IMFP) and a surface excitation parameter (SEP) with absolute units by the analysis of an absolute experimental reflection electron energy loss spectrum. The IMFPs and SEPs in Ni were deduced for electrons of 300 to 3000 eV. The obtained IMFPs were in good agreement with those calculated using the TPP-2M equation. The Chen-type empirical formula was proposed for determining the SEP. The results confirmed the applicability of the present approach for determining the IMFP and SEP for medium-energy electrons.

  12. Encapsulation of paclitaxel into a bio-nanocomposite. A study combining inelastic neutron scattering to thermal analysis and infrared spectroscopy

    NASA Astrophysics Data System (ADS)

    Martins, Murillo L.; Orecchini, Andrea; Aguilera, Luis; Eckert, Juergen; Embs, Jan; Matic, Aleksander; Saeki, Margarida J.; Bordallo, Heloisa N.

    2015-01-01

    The anticancer drug paclitaxel was encapsulated into a bio-nanocomposite formed by magnetic nanoparticles, chitosan and apatite. The aim of this drug carrier is to provide a new perspective against breast cancer. The dynamics of the pure and encapsulated drug were investigated in order to verify possible molecular changes caused by the encapsulation, as well as to follow which interactions may occur between paclitaxel and the composite. Fourier transformed infrared spectroscopy, thermal analysis, inelastic and quasi-elastic neutron scattering experiments were performed. These very preliminary results suggest the successful encapsulation of the drug.

  13. Safety analysis, risk assessment, and risk acceptance criteria

    SciTech Connect

    Jamali, K.; Stack, D.W.; Sullivan, L.H.; Sanzo, D.L.

    1997-08-01

    This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities and that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, `ensuring` plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is `safe.` Use of RACs requires quantitative estimates of consequence frequency and magnitude.

  14. A next-to-leading-order QCD analysis of charged current event rates from (nu)N deep inelastic scattering at the Fermilab Tevatron

    NASA Astrophysics Data System (ADS)

    Goldman, Jesse Matthew

    This dissertation details the results of a NLO QCD analysis of overlinenoverline Fe and overlinenoverline Fe scattering at the Fermilab Tevatron. Recently an increasing number of measurements by a variety of experiments have led to a good understanding of the partonic contents of the nucleon. Accurate parameterisations of these contents and the fact that neutrino Deep Inelastic Scattering is an ideal probe of the nucleus allow for a unique understanding of QCD and related phenomena in the kinematic region for which Q2 > 5 GeV 2 and 0.1 < x < 0.7. Perturbative QCD and such non-perturbative effects as the EMC correction, the longitudinal structure function, RL, and higher twist corrections are studied and χ2 comparisons are made with the NuTeV charged current data sample. These comparisons indicate that a NLO perturbative QCD) model combined with the EMC correction and higher twist best agrees with the NuTeV data. Using this resultant model and altering the cuts to include all data for which 0.003 < x < 0.7 leads to a NLO measurement of the strange sea level, κ. Combining this result with the measurement of κ from the NuTeV dimuon analysis leads to limits on the Cabbibo-Kobayashi-Masakawa matrix element, Vcs, which are consistent with currently accepted values.

  15. Future needs for inelastic analysis in design of high-temperature nuclear plant components. [LMFBR

    SciTech Connect

    Corum, J.M.

    1980-01-01

    The role that inelastic analyses play in the design of high-temperature nuclear plant components is described. The design methodology, which explicitly accounts for nonlinear material deformation and time-dependent failure modes, requires a significant level of realism in the prediction of structural response. Thus, material deformation and failure modeling are, along with computational procedures, key parts of the methodology. Each of these is briefly discussed along with validation by comparisons with benchmark structural tests, and problem areas and needs are discussed for each.

  16. Cold {sup 52}Cr elastic and inelastic collision-rate determination using evaporative cooling analysis

    SciTech Connect

    Nguyen, Scott V.; Carvalho, Robert de; Doyle, John M.

    2007-06-15

    Elastic and inelastic collision-rate constants of {sup 52}Cr in the temperature range of 20 mK to 1 K are inferred from the evaporative cooling of buffer gas loaded atomic chromium. Using a model that describes the dynamics of the trapped chromium cloud during evaporation, we find g{sub el}=2.15(+2.5,-1.2)x10{sup -10} cm{sup 3}/s and g{sub in}=1.36(+1.2,-0.7)x10{sup -12} cm{sup 3}/s, consistent with theory but in disagreement with previously reported measurements.

  17. Application of Geant4 simulation for analysis of soil carbon inelastic neutron scattering measurements.

    PubMed

    Yakubova, Galina; Kavetskiy, Aleksandr; Prior, Stephen A; Torbert, H Allen

    2016-07-01

    Inelastic neutron scattering (INS) was applied to determine soil carbon content. Due to non-uniform soil carbon depth distribution, the correlation between INS signals with some soil carbon content parameter is not obvious; however, a proportionality between INS signals and average carbon weight percent in ~10cm layer for any carbon depth profile is demonstrated using Monte-Carlo simulation (Geant4). Comparison of INS and dry combustion measurements confirms this conclusion. Thus, INS measurements give the value of this soil carbon parameter. PMID:27124122

  18. Evaluation of inelastic constitutive models for nonlinear structural analysis. [for aircraft turbine engines

    NASA Technical Reports Server (NTRS)

    Kaufman, A.

    1982-01-01

    The influence of inelastic material models on computed stress-strain states, and therefore predicted lives, was studied for thermomechanically loaded structures. Nonlinear structural analyses were performed on a fatigue specimen which had been subjected to thermal cycling in fluidized beds and on a mechanically load cycled benchmark notch specimen. Four incremental plasticity creep models (isotropic, kinematic, combined isotropic kinematic, combined plus transient creep) were exercised using the MARC program. Of the plasticity models, kinematic hardening gave results most consistent with experimental observations. Life predictions using the computed strain histories at the critical location with a strainrange partitioning approach considerably overpredicted the crack initiation life of the thermal fatigue specimen.

  19. General Mission Analysis Tool (GMAT) Acceptance Test Plan [Draft

    NASA Technical Reports Server (NTRS)

    Dove, Edwin; Hughes, Steve

    2007-01-01

    The information presented in this Acceptance Test Plan document shows the current status of the General Mission Analysis Tool (GMAT). GMAT is a software system developed by NASA Goddard Space Flight Center (GSFC) in collaboration with the private sector. The GMAT development team continuously performs acceptance tests in order to verify that the software continues to operate properly after updates are made. The GMAT Development team consists of NASA/GSFC Code 583 software developers, NASA/GSFC Code 595 analysts, and contractors of varying professions. GMAT was developed to provide a development approach that maintains involvement from the private sector and academia, encourages collaborative funding from multiple government agencies and the private sector, and promotes the transfer of technology from government funded research to the private sector. GMAT contains many capabilities, such as integrated formation flying modeling and MATLAB compatibility. The propagation capabilities in GMAT allow for fully coupled dynamics modeling of multiple spacecraft, in any flight regime. Other capabilities in GMAT inclucle: user definable coordinate systems, 3-D graphics in any coordinate system GMAT can calculate, 2-D plots, branch commands, solvers, optimizers, GMAT functions, planetary ephemeris sources including DE405, DE200, SLP and analytic models, script events, impulsive and finite maneuver models, and many more. GMAT runs on Windows, Mac, and Linux platforms. Both the Graphical User Interface (GUI) and the GMAT engine were built and tested on all of the mentioned platforms. GMAT was designed for intuitive use from both the GUI and with an importable script language similar to that of MATLAB.

  20. Acceptance Probability (P a) Analysis for Process Validation Lifecycle Stages.

    PubMed

    Alsmeyer, Daniel; Pazhayattil, Ajay; Chen, Shu; Munaretto, Francesco; Hye, Maksuda; Sanghvi, Pradeep

    2016-04-01

    This paper introduces an innovative statistical approach towards understanding how variation impacts the acceptance criteria of quality attributes. Because of more complex stage-wise acceptance criteria, traditional process capability measures are inadequate for general application in the pharmaceutical industry. The probability of acceptance concept provides a clear measure, derived from specific acceptance criteria for each quality attribute. In line with the 2011 FDA Guidance, this approach systematically evaluates data and scientifically establishes evidence that a process is capable of consistently delivering quality product. The probability of acceptance provides a direct and readily understandable indication of product risk. As with traditional capability indices, the acceptance probability approach assumes that underlying data distributions are normal. The computational solutions for dosage uniformity and dissolution acceptance criteria are readily applicable. For dosage uniformity, the expected AV range may be determined using the s lo and s hi values along with the worst case estimates of the mean. This approach permits a risk-based assessment of future batch performance of the critical quality attributes. The concept is also readily applicable to sterile/non sterile liquid dose products. Quality attributes such as deliverable volume and assay per spray have stage-wise acceptance that can be converted into an acceptance probability. Accepted statistical guidelines indicate processes with C pk > 1.33 as performing well within statistical control and those with C pk < 1.0 as "incapable" (1). A C pk > 1.33 is associated with a centered process that will statistically produce less than 63 defective units per million. This is equivalent to an acceptance probability of >99.99%. PMID:26024723

  1. A Viscoelastic Analysis of Inelastic X-ray Scattering Spectra from He/Ne Mixtures

    SciTech Connect

    M Izzo; F Bencivenga; A Gessini; A Cunsolo; C Masciovecchio

    2011-12-31

    A generalization of the viscoelastic model to binary systems has been applied to analyze inelastic X-ray scattering spectra from a He{sub 0.8}Ne{sub 0.2} mixture. Experiments have been carried out at temperature T = 82 K and number density n = 18.5 nm{sup -3}. In order to test the reliability of such a generalization, we measured a few representative spectra. The model exhaustively describes the experimental data and provides a determination of the spectral densities of the separate mixture components as well as those of both density and concentration fluctuations. These results can be considered as a first test for further developments.

  2. Analysis and design for inelastic structural response of extended pile shaft foundations in laterally spreading ground during earthquakes

    NASA Astrophysics Data System (ADS)

    Khosravifar, Arash

    Experiences from past earthquakes have shown that lateral spreading associated with liquefaction of cohesionless soils can be a cause of severe damage to bridge foundations. Large diameter extended pile shafts can be an effective bridge foundation choice for areas subjected to lateral spreading because they offer greater stiffness and strength relative to the magnitude of lateral spreading loads that can develop against them. A limited degree of plastic hinging below the ground surface may be allowable in design of extended pile shafts. Issues for design for extended pile shafts include: (a) how to estimate the demands due to superstructure inertia and lateral spreading in liquefied soils, and (b) how to combine these two loads in estimating the local and global inelastic demands on the structure. Studies of the response of pile foundations and pile-supported structures in liquefiable soils using physical models, numerical models, and case studies have provided the basis for a number of design recommendations. The guidance is, however, quite varied regarding how lateral spreading and superstructure inertial loads should be combined in design. To answer the above questions a series of Nonlinear Dynamic Finite Element Analyses (NDA) have been performed to investigate inelastic response of extended pile shafts subjected to liquefaction-induced lateral spreading, covering a range of soil, pile, and ground motion conditions. The results of NDA were first used to show that combined effects of lateral spreading and superstructure inertia produce larger demands than are produced by either loading case alone, such that the combined demand cannot be enveloped by analyzing the two load cases separately. The results were then used to evaluate current equivalent static analysis (ESA) method (Caltrans, 2008), with the relatively poor agreement illustrating the limitations of methods that do not combine the two loads. The results of NDA parametric study were then used to develop

  3. Dynamics of H2 adsorbed in porous materials as revealed by computational analysis of inelastic neutron scattering spectra.

    PubMed

    Pham, Tony; Forrest, Katherine A; Space, Brian; Eckert, Juergen

    2016-06-29

    The inelastic scattering of neutrons from adsorbed H2 is an effective and highly sensitive method for obtaining molecular level information on the type and nature of H2 binding sites in porous materials. While these inelastic neutron scattering (INS) spectra of the hindered rotational and translational excitations on the adsorbed H2 contain a significant amount of information, much of this can only be reliably extracted by means of a detailed analysis of the spectra through the utilization of models and theoretical calculations. For instance, the rotational tunneling transitions observed in the INS spectra can be related to a value for the barrier to rotation for the adsorbed H2 with the use of a simple phenomenological model. Since such an analysis is dependent on the model, it is far more desirable to use theoretical methods to compute a potential energy surface (PES), from which the rotational barriers for H2 adsorbed at a particular site can be determined. Rotational energy levels and transitions for the hindered rotor can be obtained by quantum dynamics calculations and compared directly with experiment with an accuracy subject only to the quality of the theoretical PES. In this paper, we review some of the quantum and classical mechanical calculations that have been performed on H2 adsorbed in various porous materials, such as clathrate hydrates, zeolites, and metal-organic frameworks (MOFs). The principal aims of these calculations have been the interpretation of the INS spectra for adsorbed H2 along with the extraction of atomic level details of its interaction with the host. We describe calculations of the PES used for two-dimensional quantum rotation as well as rigorous five-dimensional quantum coupled translation-rotation dynamics, and demonstrate that the combination of INS measurements and computational modeling can provide important and detailed insights into the molecular mechanism of H2 adsorption in porous materials. PMID:27160665

  4. Religion and suicide acceptability: a cross-national analysis.

    PubMed

    Stack, Steven; Kposowa, Augustine J

    2011-01-01

    Four perspectives (moral community thesis, religious integration, religious commitment, and social networks) guide the selection of variables in this study. Data are from the combined World Values/European Values Surveys for 2000 (50,547 individuals nested in 56 nations). The results of a multivariate hierarchical linear model support all four perspectives. Persons residing in nations with relatively high levels of religiosity, who are affiliated with one of four major faiths, are religiously committed, and are engaged with a religious network are found to be lower in suicide acceptability. The religious integration perspective, in particular, is empirically supported; affiliation with Islam is associated with low suicide acceptability. The findings provide strong support for an integrated model and demonstrate the usefulness of the moral community thesis in understanding suicide acceptability. PMID:21969937

  5. Predicting Peer Acceptance in Dutch Youth: A Multilevel Analysis

    ERIC Educational Resources Information Center

    Lubbers, Miranda; Van Der Werf, Margaretha; Kuyper, Hans; Offringa, G.

    2006-01-01

    This article uses an ecological approach to predict students' peer acceptance within junior high school classes. The authors investigate whether various characteristics (self-perception of physical attractiveness and athletic competence, cognitive ability, agreeableness, extraversion, age, parents education, number of siblings, siblings at same…

  6. Treatment Acceptability of Alternative Marital Therapies: A Comparative Analysis.

    ERIC Educational Resources Information Center

    Bornstein, Philip H.; And Others

    1983-01-01

    Examined the acceptability of four therapeutic models (i.e., behavioral, psychoanalytic, systems, and eclectic) used in treatment of marital discord. Subjects (N=88) evaluated four treatment sequences as they applied to a marital case history. Results showed that, among varying treatments, behavioral and systems approaches were rated more…

  7. Stakeholder acceptance analysis: Passive soil vapor extraction using borehole flux

    SciTech Connect

    Peterson, T.S.

    1995-12-01

    This report presents evaluations, recommendations, and requirements concerning passive soil vapor extraction (PSVE) derived from a three-year program of stakeholder involvement. PSVE takes advantage of the naturally occurring tendency of soil vapor to leave the subsurface during periods of low barometric pressure. PSVE seeks to expedite the release of volatile contaminants through the use of boreholes and technological enhancements. This report is for technology developers and those responsible for making decisions about the use of technology to remediate contamination by volatile organic compounds. Stakeholders` perspectives help those responsible for technology deployment to make good decisions concerning the acceptability and applicability of PSVE to the remediation problems they face. The report provides: stakeholders` final evaluation of the acceptability of PSVE in light of the technology`s field test; stakeholders` principal comments concerning PSVE; requirements that stakeholders have of any remediation technology. Technology decision makers should take these conclusions into account in evaluating the effectiveness and acceptability of any remedial method proposed for their site. In addition, the report presents data requirements for the technology`s field demonstration defined by stakeholders associated with the Hanford site in Washington State, as well as detailed comments on PSVE from stakeholders from Sandia National Laboratory, Rocky Flats, Idaho National Engineering Laboratory, and Los Alamos National Laboratory.

  8. Assessing the Social Acceptability of the Functional Analysis of Problem Behavior

    ERIC Educational Resources Information Center

    Langthorne, Paul; McGill, Peter

    2011-01-01

    Although the clinical utility of the functional analysis is well established, its social acceptability has received minimal attention. The current study assessed the social acceptability of functional analysis procedures among 10 parents and 3 teachers of children who had recently received functional analyses. Participants completed a 9-item…

  9. Medical applications of in vivo neutron inelastic scattering and neutron activation analysis: Technical similarities to detection of explosives and contraband

    NASA Astrophysics Data System (ADS)

    Kehayias, J. J.

    2001-07-01

    Nutritional status of patients can be evaluated by monitoring changes in elemental body composition. Fast neutron activation (for N and P) and neutron inelastic scattering (for C and O) are used in vivo to assess elements characteristic of specific body compartments. There are similarities between the body composition techniques and the detection of hidden explosives and narcotics. All samples have to be examined in depth and the ratio of elements provides a "signature" of the chemical of interest. The N/H and C/O ratios measure protein and fat content in the body. Similarly, a high C/O ratio is characteristic of narcotics and a low C/O together with a strong presence of N is a signature of some explosives. The available time for medical applications is about 20 min—compared to a few seconds for the detection of explosives—but the permitted radiation exposure is limited. In vivo neutron analysis is used to measure H, O, C, N, P, Na, Cl, and Ca for the study of the mechanisms of lean tissue depletion with aging and wasting diseases, and to investigate methods of preserving function and quality of life in the elderly.

  10. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    SciTech Connect

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-02-25

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management.

  11. The Technical Report: An Analysis of Information Design and Packaging for an Inelastic Market.

    ERIC Educational Resources Information Center

    Pinelli, Thomas E.; And Others

    As part of an evaluation of its scientific and technical information program, the National Aeronautics and Space Administration (NASA) conducted a review and analysis of structural, language, and presentation components of its technical report form. The investigation involved comparing and contrasting NASA's publications standards for technical…

  12. Vector correlation analysis for inelastic and reactive collisions between partners possessing spin and orbital angular momentum.

    PubMed

    Balint-Kurti, Gabriel G; Vasyutinskii, Oleg S

    2009-12-31

    A general reactive collision of the type A + B --> C + D is considered where both the collision partners (A and B) or the products (C and D) may possess internal, i.e., spin, orbital or rotational, angular momenta. Compact expressions are derived using a rigorous quantum mechanical analysis for the angular momentum anisotropy of either of the products (C or D) arising from an initially polarized distribution of the reactant angular momentum. The angular momentum distribution of the product is expressed in terms of canonical spherical tensors multiplied by anisotropy-transforming coefficients c(K(i)q(k))(K)(K(r),L). These coefficients act as transformation coefficients between the angular momentum anisotropy of the reactants and that of the product. They are independent of scattering angle but depend on the details of the scattering dynamics. The relationship between the coefficients c(K(i)q(k))(K)(K(r),L) and the body-fixed scattering S matrix is given and the methodology for the quantum mechanical calculation of the anisotropy-transforming coefficients is clearly laid out. The anisotropy-transforming coefficients are amenable to direct experimental measurement in a similar manner to vector correlation and alignment parameters in photodissociation processes. A key aspect of the theory is the use of projections of both reactant and product angular momenta onto the product recoil vector direction. An important new conservation rule is revealed through the analysis, namely that if the state multipole for reactant angular momentum distribution has a projection q(k) onto the product recoil vector the state multipoles for the product angular momentum distribution all have this same projection. Expressions are also presented for the distribution of the product angular momentum when its components are evaluated relative to the space-fixed Z-axis. Notes with detailed derivations of all the formulas are available as Supporting Information. PMID:19642631

  13. 18 CFR 5.22 - Notice of acceptance and ready for environmental analysis.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... INTEGRATED LICENSE APPLICATION PROCESS § 5.22 Notice of acceptance and ready for environmental analysis. (a... and ready for environmental analysis. 5.22 Section 5.22 Conservation of Power and Water Resources... application is ready for environmental analysis; (3) Requesting comments, protests, and interventions;...

  14. Micromechanics-Based Inelastic Finite Element Analysis Accomplished Via Seamless Integration of MAC/GMC

    NASA Technical Reports Server (NTRS)

    Arnold, Steven M.; Trowbridge, D.

    2001-01-01

    A critical issue in the micromechanics-based analysis of composite structures becomes the availability of a computationally efficient homogenization technique: one that is 1) Capable of handling the sophisticated, physically based, viscoelastoplastic constitutive and life models for each constituent; 2) Able to generate accurate displacement and stress fields at both the macro and the micro levels; 3) Compatible with the finite element method. The Generalized Method of Cells (GMC) developed by Paley and Aboudi is one such micromechanical model that has been shown to predict accurately the overall macro behavior of various types of composites given the required constituent properties. Specifically, the method provides "closed-form" expressions for the macroscopic composite response in terms of the properties, size, shape, distribution, and response of the individual constituents or phases that make up the material. Furthermore, expressions relating the internal stress and strain fields in the individual constituents in terms of the macroscopically applied stresses and strains are available through strain or stress concentration matrices. These expressions make possible the investigation of failure processes at the microscopic level at each step of an applied load history.

  15. Advanced development of the boundary element method for elastic and inelastic thermal stress analysis. Ph.D. Thesis, 1987 Final Report

    NASA Technical Reports Server (NTRS)

    Henry, Donald P., Jr.

    1991-01-01

    The focus of this dissertation is on advanced development of the boundary element method for elastic and inelastic thermal stress analysis. New formulations for the treatment of body forces and nonlinear effects are derived. These formulations, which are based on particular integral theory, eliminate the need for volume integrals or extra surface integrals to account for these effects. The formulations are presented for axisymmetric, two and three dimensional analysis. Also in this dissertation, two dimensional and axisymmetric formulations for elastic and inelastic, inhomogeneous stress analysis are introduced. The derivatives account for inhomogeneities due to spatially dependent material parameters, and thermally induced inhomogeneities. The nonlinear formulation of the present work are based on an incremental initial stress approach. Two inelastic solutions algorithms are implemented: an iterative; and a variable stiffness type approach. The Von Mises yield criterion with variable hardening and the associated flow rules are adopted in these algorithms. All formulations are implemented in a general purpose, multi-region computer code with the capability of local definition of boundary conditions. Quadratic, isoparametric shape functions are used to model the geometry and field variables of the boundary (and domain) of the problem. The multi-region implementation permits a body to be modeled in substructured parts, thus dramatically reducing the cost of analysis. Furthermore, it allows a body consisting of regions of different (homogeneous) material to be studied. To test the program, results obtained for simple test cases are checked against their analytic solutions. Thereafter, a range of problems of practical interest are analyzed. In addition to displacement and traction loads, problems with body forces due to self-weight, centrifugal, and thermal loads are considered.

  16. Can mindfulness and acceptance be learnt by self-help?: a systematic review and meta-analysis of mindfulness and acceptance-based self-help interventions.

    PubMed

    Cavanagh, Kate; Strauss, Clara; Forder, Lewis; Jones, Fergal

    2014-03-01

    There is growing evidence that mindfulness and acceptance-based interventions have positive consequences for psychological and physical health. The most well-established of these interventions typically involve relatively large resource commitments, in terms of both the provider and participant. A number of recent studies have begun to explore whether the benefits of such interventions can be generalised to less intensive methods. Methods include pure and guided self-help utilising resources such as books and workbooks, computer programmes and applications and audio-visual materials. This paper presents a systematic review and meta-analysis of studies that have evaluated the effectiveness and acceptability of low-intensity interventions including mindfulness and acceptance-based components. Fifteen RCTs (7 ACT-based, 4 mindfulness-based and 4 multi-component interventions including elements of mindfulness and/or acceptance) were identified and reviewed. Interventions that included mindfulness and/or acceptance-based components produced significant benefits in comparison to control conditions on measures of mindfulness/acceptance, depression and anxiety with small to medium effect sizes. Engagement with the self-help interventions varied but on average two-thirds of participants completed post-intervention measures. Emerging research into low-intensity mindfulness and acceptance-based interventions is hopeful. Recommendations for research and practice are presented. PMID:24487343

  17. Inelastic tunnel diodes

    NASA Technical Reports Server (NTRS)

    Anderson, L. M. (Inventor)

    1984-01-01

    Power is extracted from plasmons, photons, or other guided electromagnetic waves at infrared to midultraviolet frequencies by inelastic tunneling in metal-insulator-semiconductor-metal diodes. Inelastic tunneling produces power by absorbing plasmons to pump electrons to higher potential. Specifically, an electron from a semiconductor layer absorbs a plasmon and simultaneously tunnels across an insulator into metal layer which is at higher potential. The diode voltage determines the fraction of energy extracted from the plasmons; any excess is lost to heat.

  18. 18 CFR 5.22 - Notice of acceptance and ready for environmental analysis.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Notice of acceptance and ready for environmental analysis. 5.22 Section 5.22 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.22 Notice...

  19. Inelastic electron scattering from a moving nucleon

    SciTech Connect

    Kuhn, S.E.; Griffioen, K.

    1994-04-01

    The authors propose to measure inelastically scattered electrons in coincidence with spectator protons emitted backwards relative to the virtual photon direction in the reaction d(e, e{prime}p{sub s})X. In a simple spectator model, the backward proton has equal and opposite momentum to the neutron before it is struck, allowing the authors to study the dependence on kinematics and off-shell behaviour of the electron-nucleon inelastic cross section. If the photon couples to a quark in a 6-quark bag, a different dependence of the cross section on the kinematic variables (x, Q{sup 2}, and p{sub s}) can be observed. This proposed experiment requires large acceptance and beam energies above 6 GeV. It is ideally suited for the CEBAF Large Acceptance Spectrometer (CLAS).

  20. Spent fuel acceptance scenarios devoted to shutdown reactors: A preliminary analysis

    SciTech Connect

    Wood, T.W.; Plummer, A.M.; Dippold, D.G.; Short, S.M.; Battelle Memorial Inst., Columbus, OH . Office of Transportation Systems and Planning; Pacific Northwest Lab., Richland, WA )

    1989-10-01

    Spent fuel acceptance schedules and the allocation of federal acceptance capacity among commercial nuclear power reactors have important operational and cost consequences for reactor operators. Alternative allocation schemes were investigated to some extent in DOE's MRS Systems Study. The current study supplements these analyses for a class of acceptance schemes in which the acceptance capacity of the federal radioactive waste management system is allocated principally to shutdown commercial power reactors, and extends the scope of analysis to include considerations of at-reactor cask loading rates. The operational consequences of these schemes for power reactors, as measured in terms of quantity of spent fuel storage requirement above storage pool capacities and number of years of pool operations after last discharge, are estimated, as are the associated utility costs. This study does not attempt to examine the inter-utility equity considerations involved in departures from the current oldest-fuel-first (OFF) allocation rule as specified in the Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Radioactive Waste.'' In the sense that the alternative allocations are more economically efficient than OFF, however, they approximate the allocations that could result from free exchange of acceptance rights among utilities. Such a process would result in the preservation of inter-utility equity. 13 refs., 9 figs., 9 tabs.

  1. Multichannel R-matrix analysis of elastic and inelastic resonances in the {sup 21}Na+ p compound system

    SciTech Connect

    Ruiz, C.; Davinson, T.; Sarazin, F.; Roberts, I.; Robinson, A.; Woods, P.J.; Buchmann, L.; Shotter, A.C.; Walden, P.; Clarke, N.M.; Chen, A.A.; Fulton, B.R.; Groombridge, D.; Pearson, J.; Murphy, A.S.

    2005-02-01

    A multichannel R-matrix formalism was used to fit {sup 21}Na+ p resonant elastic and inelastic scattering data taken at the TRIUMF UK detector array facility at TRIUMF-ISAC. Five resonances were observed corresponding to states in {sup 22}Mg above the proton threshold. Four of these corresponded to states seen in previous transfer reaction studies where firm spin-parity assignments could not be made. One new resonance, previously unobserved in any reaction, was also seen. Where possible, resonance energies, partial widths, and spin-parity values of these resonances were extracted. The correspondence between these states and possible analogs in the mirror nucleus {sup 22}Ne is discussed, as well as the relation to T=1 states in the nucleus {sup 22}Na.

  2. Passion fruit juice with different sweeteners: sensory profile by descriptive analysis and acceptance.

    PubMed

    Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André

    2015-03-01

    This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice. PMID:25838891

  3. Passion fruit juice with different sweeteners: sensory profile by descriptive analysis and acceptance

    PubMed Central

    Rocha, Izabela Furtado de Oliveira; Bolini, Helena Maria André

    2015-01-01

    This study evaluated the effect of different sweeteners on the sensory profile, acceptance, and drivers of preference of passion fruit juice samples sweetened with sucrose, aspartame, sucralose, stevia, cyclamate/saccharin blend 2:1, and neotame. Sensory profiling was performed by 12 trained assessors using quantitative descriptive analysis (QDA). Acceptance tests (appearance, aroma, flavor, texture and overall impression) were performed with 124 consumers of tropical fruit juice. Samples with sucrose, aspartame and sucralose showed similar sensory profile (P < 0.05), without bitter taste, bitter aftertaste, and metallic taste, and samples with sucrose and sucralose did not differ from each other for the attribute sweet aftertaste. Passion fruit flavor affected positively and sweet aftertaste affected negatively the acceptance of the samples. Samples sweetened with aspartame, sucralose, and sucrose presented higher acceptance scores for the attributes flavor, texture, and overall impression, with no significant (P < 0.05) differences between them. Aspartame and sucralose can be good substitutes for sucrose in passion fruit juice. PMID:25838891

  4. Elastic and Inelastic Collisions

    ERIC Educational Resources Information Center

    Gluck, Paul

    2010-01-01

    There have been two articles in this journal that described a pair of collision carts used to demonstrate vividly the difference between elastic and inelastic collisions. One cart had a series of washers that were mounted rigidly on a rigid wooden framework, the other had washers mounted on rubber bands stretched across a framework. The rigidly…

  5. Deep inelastic phenomena

    SciTech Connect

    Prescott, C.Y.

    1980-10-01

    Nucleon structure as seen in the context of deep inelastic scattering is discussed. The lectures begin with consideration of the quark-parton model. The model forms the basis of understanding lepton-nucleon inelastic scattering. As improved data in lepton-nucleon scattering at high energies became available, the quark-parton model failed to explain some crucial features of these data. At approximately the same time a candidate theory of strong interactions based on a SU(3) gauge theory of color was being discussed in the literature, and new ideas on the explanation of inelastic scattering data became popular. A new theory of strong interactions, now called quantum chromodynamics provides a new framework for understanding the data, with a much stronger theoretical foundation, and seems to explain well the features of the data. The lectures conclude with a look at some recent experiments which provide new data at very high energies. These lectures are concerned primarily with charged lepton inelastic scattering and to a lesser extent with neutrino results. Furthermore, due to time and space limitations, topics such as final state hadron studies, and multi-muon production are omitted here. The lectures concentrate on the more central issues: the quark-parton model and concepts of scaling, scale breaking and the ideas of quantum chromodynamics, the Q/sup 2/ dependence of structure function, moments, and the important parameter R.

  6. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (ESTSC)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  7. Simultaneous analysis of consumer variables, acceptability and sensory characteristics of dry-cured ham.

    PubMed

    Sugimoto, Masahiro; Obiya, Shinichi; Kaneko, Miku; Enomoto, Ayame; Honma, Mayu; Wakayama, Masataka; Tomita, Masaru

    2016-11-01

    We conducted a consumer acceptability analysis of dry-cured ham based on sensory evaluation. Consumer acceptability data are rendered heterogeneous by the diverse backgrounds and assessment abilities of the participants, requiring versatile analytical methods for their interpretation. Totally, 9 sensory attributes of 12 kinds of dry-cured ham samples collected from Japan (n=9), Italy (n=1), Spain (n=1), and Germany (n=1) were tasted by 117 Japanese consumers who showed acceptable evaluation abilities during blind sampling. Common techniques, such as hierarchical clustering, principal component analysis, and external preference mapping, were simultaneously utilized to analyze each characteristics scored in modified hedonic scale. These analyses revealed the relationships between the features and preferences of the assessors. For example, consumers aged 20-30 with smoking and drinking habits preferred sweetness and saltiness, and gave high ratings to Spanish Jómon serrano and Italian prosciutto. Our approach could assist ham marketers to identify potential purchasers and the preferred characteristics of their products. PMID:27343459

  8. A combined analysis of SLAC experiments on deep inelastic e-p and e-d scattering

    SciTech Connect

    Whitlow, L.W.; Bodek, A.; deBarbaro, P.; Dasu, S.; Harada, H.; Krasny, M.W.; Lang, K.; Riordan, E.M.; Rock, S.; Arnold, R.; Benton, D.; Bosted, P.; Button-Shafer, J.; deChambrier, G.; Clogher, L.; Lung, A.; Szalata, Z.M.; Alster, J.; Debebe, B.; Hicks, R.; Dietrich, F.; Van Bibber, K.; Filippone, B.; Jourdan, J.; Milner, R.; McKeown, R.; Potterveld, D.; Walker, R.C.; Gearhart, R.; Para, A.

    1989-08-01

    We report recent work on the extraction of R = {sigma}{sub L}/{sigma}{sub T} and the structure function F{sub 2} over a large kinematic range, which is based on a reanalysis of deep inelastic {var_epsilon} {minus} p and {var_epsilon} {minus} d scattering cross sections measured at SLAC between 1970 and 1985. All these data were corrected for radiative effects using improved versions of external and internal radiative correction procedures. The data from seven individual experiments were normalized to those from the recent high-precision SLAC experiment E140. We find that R{sub p} = R{sub d}, as expected in QCD. The value of R is higher than predicted by QCD even when target-mass effects are included. This difference indicates that additional dynamical higher-twist effects may be present. The structure functions F{sub 2}p and F{sub 2}d were also extracted from the full data sets of normalized cross sections using an empirical fit to R. These structure functions were then compared with data from the CERN muon scattering experiments BCDMS and EMC. We find that our data are consistent with the EMC data, if the latter are multiplied by a normalization factor of 1.07. No single, uniform normalization factor can be applied to the BCDMS data that will bring them into agreement with the SLAC data in the region of overlap.

  9. A combined analysis of SLAC experiments on deep inelastic e-p and e-d scattering

    SciTech Connect

    Whitlow, L.W. ); Bodek, A.; deBarbaro, P.; Dasu, S.; Harada, H.; Krasny, M.W.; Lang, K.; Riordan, E.M. ); Rock, S.; Arnold, R.; Benton, D.; Bosted, P.; Button-Shafer, J.; deChambrier, G.; Clogher, L.; Lung, A.; Szalata, Z.M. ); Alster, J. ); Debebe, B.; Hicks, R. (Massach

    1989-08-01

    We report recent work on the extraction of R = {sigma}{sub L}/{sigma}{sub T} and the structure function F{sub 2} over a large kinematic range, which is based on a reanalysis of deep inelastic {var epsilon} {minus} p and {var epsilon} {minus} d scattering cross sections measured at SLAC between 1970 and 1985. All these data were corrected for radiative effects using improved versions of external and internal radiative correction procedures. The data from seven individual experiments were normalized to those from the recent high-precision SLAC experiment E140. We find that R{sub p} = R{sub d}, as expected in QCD. The value of R is higher than predicted by QCD even when target-mass effects are included. This difference indicates that additional dynamical higher-twist effects may be present. The structure functions F{sub 2}p and F{sub 2}d were also extracted from the full data sets of normalized cross sections using an empirical fit to R. These structure functions were then compared with data from the CERN muon scattering experiments BCDMS and EMC. We find that our data are consistent with the EMC data, if the latter are multiplied by a normalization factor of 1.07. No single, uniform normalization factor can be applied to the BCDMS data that will bring them into agreement with the SLAC data in the region of overlap.

  10. Descriptive analysis and early-stage consumer acceptance of yogurts fermented with carrot juice.

    PubMed

    Cliff, M A; Fan, L; Sanford, K; Stanich, K; Doucette, C; Raymond, N

    2013-07-01

    This research explored the sensory characteristics and consumer acceptance of novel probiotic unsweetened yogurts. Yogurts were made with 4 carrot juice levels (8, 16, 24, and 32%), 2 firmness levels (regular, 45g/L milk solids; firm, 90g/L milk solids), and 2 starter cultures (C1, C2). The sensory profile characterized the color intensity (before and after stirring), carrot flavor, sourness, and 7 texture/mouth-feel attributes (astringency, chalkiness, mouth-coating, thickness, smoothness, creaminess, and graininess). The influence of carrot juice level and firmness level were evaluated using ANOVA, polynomial contrasts, and principal component analysis. Mean scores and standard errors were calculated. Consumer acceptance panels in Wolfville, Nova Scotia (n=56), and in Vancouver, British Columbia (Asian n=72, non-Asian n=72), evaluated the hedonic responses to the C1 and C2 formulations, respectively. We observed increases in color intensity, carrot flavor, creaminess, mouth-coating, and chalkiness with increasing carrot juice levels, as well as increases in color intensity, carrot flavor, creaminess, mouth-coating, thickness, and astringency with increasing milk solids concentrations of the C1 and C2 yogurts. Mean hedonic scores for color, appearance, and texture/mouth-feel were greater than hedonic scores for aroma, flavor/taste, and overall liking. This research identified the sensory qualities that need further development and demonstrated the importance of early-stage consumer acceptance research for directing new product development. PMID:23664338

  11. Inelastic electron tunneling spectroscopy

    NASA Technical Reports Server (NTRS)

    Khanna, S. K.; Lambe, J.

    1983-01-01

    Inelastic electron tunneling spectroscopy is a useful technique for the study of vibrational modes of molecules adsorbed on the surface of oxide layers in a metal-insulator-metal tunnel junction. The technique involves studying the effects of adsorbed molecules on the tunneling spectrum of such junctions. The data give useful information about the structure, bonding, and orientation of adsorbed molecules. One of the major advantages of inelastic electron tunneling spectroscopy is its sensitivity. It is capable of detecting on the order of 10 to the 10th molecules (a fraction of a monolayer) on a 1 sq mm junction. It has been successfully used in studies of catalysis, biology, trace impurity detection, and electronic excitations. Because of its high sensitivity, this technique shows great promise in the area of solid-state electronic chemical sensing.

  12. Perceived Parental Acceptance-Rejection and Psychological Adjustment: A Meta-Analysis of Cross-Cultural and Intracultural Studies.

    ERIC Educational Resources Information Center

    Khaleque, Abdul; Rohner, Ronald P.

    2002-01-01

    Information was pooled from 43 studies to test a postulate of parental acceptance-rejection theory (PARTherory, which states that perceived parental acceptance-rejection is associated with a specific form of psychological maladjustment. Results showed that the predicted relationship emerged without exception. Analysis of fail safe showed that…

  13. Chain of custody; recommendations for acceptance and analysis of evidentiary geochemical samples

    USGS Publications Warehouse

    Murphy, Christine M.; Briggs, Paul H.; Adrian, Betty M.; Wilson, Steve A.; Hageman, Phil L.; Theodorakos, Pete M.

    1997-01-01

    Personnel from the Analytical Chemistry Services Group (ACSG), Mineral Resource Survey Program, formed a team to determine the policies for acceptance and analysis of geochemical samples. This team contacted law enforcement agencies that handle litigious samples, laboratories that work with samples of special nature, and the Solicitor General, Department of the Interior. Using the knowledge from these agencies as well as the expertise of ACSG personnel, sample control routine procedures, sample control evidentiary procedures, personnel policy governing chain-of-custody samples, and the general polices governing physical security of chain-of custody samples have been enacted.

  14. NUBOW-2D Inelastic

    Energy Science and Technology Software Center (ESTSC)

    2002-01-31

    This program solves the two-dimensional mechanical equilbrium configuration of a core restraint system, which is subjected to radial temperature and flux gradients, on a time increment basis. At each time increment, the code calculates the irradiation creep and swelling strains for each duct from user-specified creep and swelling correlations. Using the calculated thermal bowing, inelastic bowing and the duct dilation, the corresponding equilibrium forces, beam deflections, total beam displacements, and structural reactivity changes are calculated.

  15. Risk analysis for new nuclear waste sites: Will it generate public acceptance?

    SciTech Connect

    Inhaber, H.

    1993-11-01

    This report discusses public acceptance of radioactive waste facilities and what seems to be increasingly militant stances against such facilities. The role of risk assessment in possibly enhancing public acceptance is investigated.

  16. Drivers of Vaginal Drug Delivery System Acceptability from Internet-Based Conjoint Analysis.

    PubMed

    Primrose, Rachel J; Zaveri, Toral; Bakke, Alyssa J; Ziegler, Gregory R; Moskowitz, Howard R; Hayes, John E

    2016-01-01

    Vaginal microbicides potentially empower women to protect themselves from HIV and other sexually transmitted infections (STIs), especially when culture, religion, or social status may prevent them from negotiating condom use. The open literature contains minimal information on factors that drive user acceptability of women's health products or vaginal drug delivery systems. By understanding what women find to be most important with regard to sensory properties and product functionality, developers can iteratively formulate a more desirable product. Conjoint analysis is a technique widely used in market research to determine what combination of elements influence a consumer's willingness to try or use a product. We applied conjoint analysis here to better understand what sexually-active woman want in a microbicide, toward our goal of formulating a product that is highly acceptable to women. Both sensory and non-sensory attributes were tested, including shape, color, wait time, partner awareness, messiness/leakage, duration of protection, and functionality. Heterosexually active women between 18 and 35 years of age in the United States (n = 302) completed an anonymous online conjoint survey using IdeaMap software. Attributes (product elements) were systematically presented in various combinations; women rated these combinations of a 9-point willingness-to-try scale. By coupling systematic combinations and regression modeling, we can estimate the unique appeal of each element. In this population, a multifunctional product (i.e., broad spectrum STI protection, coupled with conception) is far more desirable than a microbicide targeted solely for HIV protection; we also found partner awareness and leakage are potentially strong barriers to use. PMID:26999009

  17. Drivers of Vaginal Drug Delivery System Acceptability from Internet-Based Conjoint Analysis

    PubMed Central

    Primrose, Rachel J.; Zaveri, Toral; Bakke, Alyssa J.; Ziegler, Gregory R.; Moskowitz, Howard R.; Hayes, John E.

    2016-01-01

    Vaginal microbicides potentially empower women to protect themselves from HIV and other sexually transmitted infections (STIs), especially when culture, religion, or social status may prevent them from negotiating condom use. The open literature contains minimal information on factors that drive user acceptability of women’s health products or vaginal drug delivery systems. By understanding what women find to be most important with regard to sensory properties and product functionality, developers can iteratively formulate a more desirable product. Conjoint analysis is a technique widely used in market research to determine what combination of elements influence a consumer’s willingness to try or use a product. We applied conjoint analysis here to better understand what sexually-active woman want in a microbicide, toward our goal of formulating a product that is highly acceptable to women. Both sensory and non-sensory attributes were tested, including shape, color, wait time, partner awareness, messiness/leakage, duration of protection, and functionality. Heterosexually active women between 18 and 35 years of age in the United States (n = 302) completed an anonymous online conjoint survey using IdeaMap software. Attributes (product elements) were systematically presented in various combinations; women rated these combinations of a 9-point willingness-to-try scale. By coupling systematic combinations and regression modeling, we can estimate the unique appeal of each element. In this population, a multifunctional product (i.e., broad spectrum STI protection, coupled with conception) is far more desirable than a microbicide targeted solely for HIV protection; we also found partner awareness and leakage are potentially strong barriers to use. PMID:26999009

  18. Framework for the analysis of nanotechnologies' impacts and ethical acceptability: basis of an interdisciplinary approach to assessing novel technologies.

    PubMed

    Patenaude, Johane; Legault, Georges-Auguste; Beauvais, Jacques; Bernier, Louise; Béland, Jean-Pierre; Boissy, Patrick; Chenel, Vanessa; Daniel, Charles-Étienne; Genest, Jonathan; Poirier, Marie-Sol; Tapin, Danielle

    2015-04-01

    The genetically manipulated organism (GMO) crisis demonstrated that technological development based solely on the law of the marketplace and State protection against serious risks to health and safety is no longer a warrant of ethical acceptability. In the first part of our paper, we critique the implicitly individualist social-acceptance model for State regulation of technology and recommend an interdisciplinary approach for comprehensive analysis of the impacts and ethical acceptability of technologies. In the second part, we present a framework for the analysis of impacts and acceptability, devised-with the goal of supporting the development of specific nanotechnological applications-by a team of researchers from various disciplines. At the conceptual level, this analytic framework is intended to make explicit those various operations required in preparing a judgement about the acceptability of technologies that have been implicit in the classical analysis of toxicological risk. On a practical level, we present a reflective tool that makes it possible to take into account all the dimensions involved and understand the reasons invoked in determining impacts, assessing them, and arriving at a judgement about acceptability. PMID:24728612

  19. 77 FR 24941 - Vantage Wind Energy LLC; Order Accepting Updated Market Power Analysis and Providing Direction on...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-26

    ... and August 8, 2011 filings were published in the Federal Register, 75 FR 81,600 (2010) and 77 FR 2518... Energy Regulatory Commission Vantage Wind Energy LLC; Order Accepting Updated Market Power Analysis and... analysis filed by Vantage Wind Energy LLC (Vantage Wind). As discussed below, the Commission concludes...

  20. Gap Acceptance During Lane Changes by Large-Truck Drivers—An Image-Based Analysis

    PubMed Central

    Nobukawa, Kazutoshi; Bao, Shan; LeBlanc, David J.; Zhao, Ding; Peng, Huei; Pan, Christopher S.

    2016-01-01

    This paper presents an analysis of rearward gap acceptance characteristics of drivers of large trucks in highway lane change scenarios. The range between the vehicles was inferred from camera images using the estimated lane width obtained from the lane tracking camera as the reference. Six-hundred lane change events were acquired from a large-scale naturalistic driving data set. The kinematic variables from the image-based gap analysis were filtered by the weighted linear least squares in order to extrapolate them at the lane change time. In addition, the time-to-collision and required deceleration were computed, and potential safety threshold values are provided. The resulting range and range rate distributions showed directional discrepancies, i.e., in left lane changes, large trucks are often slower than other vehicles in the target lane, whereas they are usually faster in right lane changes. Video observations have confirmed that major motivations for changing lanes are different depending on the direction of move, i.e., moving to the left (faster) lane occurs due to a slower vehicle ahead or a merging vehicle on the right-hand side, whereas right lane changes are frequently made to return to the original lane after passing. PMID:26924947

  1. Second-Order Inelastic Dynamic Analysis of 3D Semi-Rigid Steel Frames Under Earthquake Loads with Three Components

    SciTech Connect

    Ozakgul, Kadir

    2008-07-08

    In this study, it has been presented an algorithm for second-order elastoplastic dynamic time-history analysis of three dimensional frames that have steel members with semirigid joints. The proposed analysis accounts for material, geometric and connection nonlinearities. Material nonlinearity have been modeled by the Ramberg-Osgood relation. While the geometric nonlinearity caused by axial force has been described by the use of the geometric stiffness matrix, the nonlinearity caused by the interaction between the axial force and bending moment has been also described by the use of the stability functions. The independent hardening model has been used to describe the nonlinear behaviour of semi-rigid connections. Dynamic equation of motion has been solved by Newmark's constant acceleration method in time history domain.

  2. Sivers effect in semiinclusive deeply inelastic scattering

    SciTech Connect

    Collins, J.C.; Efremov, A. V.; Goeke, K.; Menzel, S.; Metz, A.; Schweitzer, P.

    2006-01-01

    The Sivers function is extracted from HERMES data on single spin asymmetries in semi-inclusive deeply inelastic scattering. Our analysis use a simple Gaussian model for the distribution of transverse parton momenta, together with the flavor dependence given by the leading 1/N{sub c} approximation and a neglect of the Sivers antiquark distribution. We find that within the errors of the data these approximations are sufficient.

  3. Combination of measurements of inclusive deep inelastic {e^{± }p} scattering cross sections and QCD analysis of HERA data. H1 and ZEUS Collaborations

    NASA Astrophysics Data System (ADS)

    Abramowicz, H.; Abt, I.; Adamczyk, L.; Adamus, M.; Andreev, V.; Antonelli, S.; Antunović, B.; Aushev, V.; Aushev, Y.; Baghdasaryan, A.; Begzsuren, K.; Behnke, O.; Behrendt Dubak, A.; Behrens, U.; Belousov, A.; Belov, P.; Bertolin, A.; Bloch, I.; Boos, E. G.; Borras, K.; Boudry, V.; Brandt, G.; Brisson, V.; Britzger, D.; Brock, I.; Brook, N. H.; Brugnera, R.; Bruni, A.; Buniatyan, A.; Bussey, P. J.; Bylinkin, A.; Bystritskaya, L.; Caldwell, A.; Campbell, A. J.; Cantun Avila, K. B.; Capua, M.; Catterall, C. D.; Ceccopieri, F.; Cerny, K.; Chekelian, V.; Chwastowski, J.; Ciborowski, J.; Ciesielski, R.; Contreras, J. G.; Cooper-Sarkar, A. M.; Corradi, M.; Corriveau, F.; Cvach, J.; Dainton, J. B.; Daum, K.; Dementiev, R. K.; Devenish, R. C. E.; Diaconu, C.; Dobre, M.; Dodonov, V.; Dolinska, G.; Dusini, S.; Eckerlin, G.; Egli, S.; Elsen, E.; Favart, L.; Fedotov, A.; Feltesse, J.; Ferencei, J.; Figiel, J.; Fleischer, M.; Fomenko, A.; Foster, B.; Gabathuler, E.; Gach, G.; Gallo, E.; Garfagnini, A.; Gayler, J.; Geiser, A.; Ghazaryan, S.; Gizhko, A.; Gladilin, L. K.; Goerlich, L.; Gogitidze, N.; Golubkov, Yu. A.; Gouzevitch, M.; Grab, C.; Grebenyuk, A.; Grebenyuk, J.; Greenshaw, T.; Gregor, I.; Grindhammer, G.; Grzelak, G.; Gueta, O.; Guzik, M.; Gwenlan, C.; Haidt, D.; Hain, W.; Henderson, R. C. W.; Henkenjohann, P.; Hladkỳ, J.; Hochman, D.; Hoffmann, D.; Hori, R.; Horisberger, R.; Hreus, T.; Huber, F.; Ibrahim, Z. A.; Iga, Y.; Ishitsuka, M.; Iudin, A.; Jacquet, M.; Janssen, X.; Januschek, F.; Jomhari, N. Z.; Jung, H.; Kadenko, I.; Kananov, S.; Kapichine, M.; Karshon, U.; Katzy, J.; Kaur, M.; Kaur, P.; Kiesling, C.; Kisielewska, D.; Klanner, R.; Klein, M.; Klein, U.; Kleinwort, C.; Kogler, R.; Kondrashova, N.; Kononenko, O.; Korol, Ie.; Korzhavina, I. A.; Kostka, P.; Kotański, A.; Kötz, U.; Kovalchuk, N.; Kowalski, H.; Kretzschmar, J.; Krücker, D.; Krüger, K.; Krupa, B.; Kuprash, O.; Kuze, M.; Landon, M. P. J.; Lange, W.; Laycock, P.; Lebedev, A.; Levchenko, B. B.; Levonian, S.; Levy, A.; Libov, V.; Limentani, S.; Lipka, K.; Lisovyi, M.; List, B.; List, J.; Lobodzinska, E.; Lobodzinski, B.; Löhr, B.; Lohrmann, E.; Longhin, A.; Lontkovskyi, D.; Lukina, O. Yu.; Makarenko, I.; Malinovski, E.; Malka, J.; Martyn, H.-U.; Maxfield, S. J.; Mehta, A.; Mergelmeyer, S.; Meyer, A. B.; Meyer, H.; Meyer, J.; Mikocki, S.; Mohamad Idris, F.; Morozov, A.; Muhammad Nasir, N.; Müller, K.; Myronenko, V.; Nagano, K.; Naumann, Th.; Newman, P. R.; Niebuhr, C.; Nikiforov, A.; Nobe, T.; Notz, D.; Nowak, G.; Nowak, R. J.; Olsson, J. E.; Onishchuk, Yu.; Ozerov, D.; Pahl, P.; Pascaud, C.; Patel, G. D.; Paul, E.; Perez, E.; Perlański, W.; Petrukhin, A.; Picuric, I.; Pirumov, H.; Pitzl, D.; Pokorny, B.; Pokrovskiy, N. S.; Polifka, R.; Przybycień, M.; Radescu, V.; Raicevic, N.; Ravdandorj, T.; Reimer, P.; Rizvi, E.; Robmann, P.; Roloff, P.; Roosen, R.; Rostovtsev, A.; Rotaru, M.; Rubinsky, I.; Rusakov, S.; Ruspa, M.; Šálek, D.; Sankey, D. P. C.; Sauter, M.; Sauvan, E.; Saxon, D. H.; Schioppa, M.; Schmidke, W. B.; Schmitt, S.; Schneekloth, U.; Schoeffel, L.; Schöning, A.; Schörner-Sadenius, T.; Sefkow, F.; Shcheglova, L. M.; Shevchenko, R.; Shkola, O.; Shushkevich, S.; Shyrma, Yu.; Singh, I.; Skillicorn, I. O.; Słomiński, W.; Solano, A.; Soloviev, Y.; Sopicki, P.; South, D.; Spaskov, V.; Specka, A.; Stanco, L.; Steder, M.; Stefaniuk, N.; Stella, B.; Stern, A.; Stopa, P.; Straumann, U.; Sykora, T.; Sztuk-Dambietz, J.; Szuba, D.; Szuba, J.; Tassi, E.; Thompson, P. D.; Tokushuku, K.; Tomaszewska, J.; Traynor, D.; Trofymov, A.; Truöl, P.; Tsakov, I.; Tseepeldorj, B.; Tsurugai, T.; Turcato, M.; Turkot, O.; Turnau, J.; Tymieniecka, T.; Valkárová, A.; Vallée, C.; Van Mechelen, P.; Vazdik, Y.; Verbytskyi, A.; Viazlo, O.; Walczak, R.; Wan Abdullah, W. A. T.; Wegener, D.; Wichmann, K.; Wing, M.; Wolf, G.; Wünsch, E.; Yamada, S.; Yamazaki, Y.; Žáček, J.; Zakharchuk, N.; Żarnecki, A. F.; Zawiejski, L.; Zenaiev, O.; Zhang, Z.; Zhautykov, B. O.; Zhmak, N.; Žlebčík, R.; Zohrabyan, H.; Zomer, F.; Zotkin, D. S.

    2015-12-01

    A combination is presented of all inclusive deep inelastic cross sections previously published by the H1 and ZEUS collaborations at HERA for neutral and charged current e^{± }p scattering for zero beam polarisation. The data were taken at proton beam energies of 920, 820, 575 and 460 GeV and an electron beam energy of 27.5 GeV. The data correspond to an integrated luminosity of about 1 fb^{-1} and span six orders of magnitude in negative four-momentum-transfer squared, Q^2, and Bjorken x. The correlations of the systematic uncertainties were evaluated and taken into account for the combination. The combined cross sections were input to QCD analyses at leading order, next-to-leading order and at next-to-next-to-leading order, providing a new set of parton distribution functions, called HERAPDF2.0. In addition to the experimental uncertainties, model and parameterisation uncertainties were assessed for these parton distribution functions. Variants of HERAPDF2.0 with an alternative gluon parameterisation, HERAPDF2.0AG, and using fixed-flavour-number schemes, HERAPDF2.0FF, are presented. The analysis was extended by including HERA data on charm and jet production, resulting in the variant HERAPDF2.0Jets. The inclusion of jet-production cross sections made a simultaneous determination of these parton distributions and the strong coupling constant possible, resulting in α _s(M_Z^2)=0.1183 ± 0.0009 (exp) ± 0.0005(model/parameterisation) ± 0.0012(hadronisation) ^{+0.0037}_{-0.0030}(scale). An extraction of xF_3^{γ Z} and results on electroweak unification and scaling violations are also presented.

  4. Study on Influencing Factor Analysis and Application of Consumer Mobile Commerce Acceptance

    NASA Astrophysics Data System (ADS)

    Li, Gaoguang; Lv, Tingjie

    Mobile commerce (MC) refers to e-commerce activities carried out using a mobile device such as a phone or PDA. With new technology, MC will be rapidly growing in the near future. At the present time, what factors making consumer accept MC and what MC applications are acceptable by consumers are two of hot issues both for MC providers and f or MC researchers. This study presents a proposed MC acceptance model that integrates perceived playfulness, perceived risk and cost into the TAM to study which factors affect consumer MC acceptance. The proposed model includes five variables, namely perceived risk, cost, perceived usefulness, perceived playfulness, perceived ease of use, perceived playfulness. Then, using analytic hierarchy process (AHP) to calculate weight of criteria involved in proposed model. Finally, the study utilizes fuzzy comprehensive evaluation method to evaluate MC applications accepted possibility, and then a MC application is empirically tested using data collected from a survey of MC consumers.

  5. The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 1: Theoretical manual

    NASA Technical Reports Server (NTRS)

    Nakazawa, Shohei

    1991-01-01

    Formulations and algorithms implemented in the MHOST finite element program are discussed. The code uses a novel concept of the mixed iterative solution technique for the efficient 3-D computations of turbine engine hot section components. The general framework of variational formulation and solution algorithms are discussed which were derived from the mixed three field Hu-Washizu principle. This formulation enables the use of nodal interpolation for coordinates, displacements, strains, and stresses. Algorithmic description of the mixed iterative method includes variations for the quasi static, transient dynamic and buckling analyses. The global-local analysis procedure referred to as the subelement refinement is developed in the framework of the mixed iterative solution, of which the detail is presented. The numerically integrated isoparametric elements implemented in the framework is discussed. Methods to filter certain parts of strain and project the element discontinuous quantities to the nodes are developed for a family of linear elements. Integration algorithms are described for linear and nonlinear equations included in MHOST program.

  6. Improving Operational Acceptability of Dynamic Weather Routes Through Analysis of Commonly Use Routings

    NASA Technical Reports Server (NTRS)

    Evans, Antony D.; Sridhar, Banavar; McNally, David

    2016-01-01

    The Dynamic Weather Routes (DWR) tool is a ground-based trajectory automation system that continuously and automatically analyzes active in-flight aircraft in en route airspace to find simple modifications to flight plan routes that can save significant flying time, while avoiding weather and considering traffic conflicts, airspace sector congestion, special use airspace, and FAA routing restrictions. Trials of the DWR system have shown that significant delay savings are possible. However, some DWR advised routes are also rejected by dispatchers or modified before being accepted. Similarly, of those sent by dispatchers to flight crews as proposed route change requests, many are not accepted by air traffic control, or are modified before implementation as Center route amendments. Such actions suggest that the operational acceptability of DWR advised route corrections could be improved, which may reduce workload and increase delay savings. This paper analyzes the historical usage of different flight routings, varying from simple waypoint pairs to lengthy strings of waypoints incorporating jet routes, in order to improve DWR route acceptability. An approach is developed that can be incorporated into DWR, advising routings with high historical usage and savings potential similar to that of the nominal DWR advisory. It is hypothesized that modifying a nominal DWR routing to one that is commonly used, and nearby, will result in more actual savings since common routings are generally familiar and operationally acceptable to air traffic control. The approach allows routing segments with high historical usage to be concatenated to form routes that meet all DWR constraints. The relevance of a route's historical usage to its acceptance by dispatchers and air traffic control is quantified by analyzing historical DWR data. Results indicate that while historical usage may be less of a concern to flight dispatchers accepting or rejecting DWR advised route corrections, it may be

  7. Atomic collisions, inelastic indeed

    NASA Astrophysics Data System (ADS)

    Bercegol, Herve; Ferrando, Gwenael; Lehoucq, Roland

    At the turn of the twentieth century, a hot controversy raged about the ability of Boltzmann's framework to take care of irreversibility. The so-called Loschmidt's paradox progressively faded with time during the last hundred years, due to the predictive efficiency of statistical mechanics. However, one detail at the origin of the controversy - the elasticity of atomic collisions - was not completely challenged. A semi-classical treatment of two atoms interacting with the vacuum zero-point field permits to predict a friction force acting against the rotation of the pair of atoms. By its form and its level, the calculated torque is a candidate as a physical cause for diffusion of energy and angular momentum, and consequently for entropy growth. It opens the way to a revision of the standard vision of irreversibility. This presentation will focus on two points. First we will discuss the recent result in a broader context of electromagnetic interactions during microscopic collisions. The predicted friction phenomenon can be compared to and distinguished from Collision-Induced Emission and other types of inelastic collisions. Second we will investigate the consequences of the friction torque on calculated trajectories of colliding atoms, quantifying the generation of dimers linked by dispersion forces.

  8. Mindfulness- and Acceptance-based Interventions for Psychosis: A Systematic Review and Meta-analysis

    PubMed Central

    Lauche, Romy; Haller, Heidemarie; Langhorst, Jost; Dobos, Gustav

    2016-01-01

    Background: Mindfulness- and acceptance-based interventions are increasingly studied as a potential treatment for a variety of mental conditions. Objective: To assess the effects of mindfulness- and acceptance-based interventions on psychotic symptoms and hospitalization in patients with psychosis Methods: MEDLINE/PubMed, Embase, the Cochrane Library, and PsycINFO were screened from inception through April 2015. Randomized controlled trials (RCTs) were analyzed when they assessed psychotic symptoms or hospitalization in patients with psychosis; affect, acceptance, mindfulness, and safety were defined as secondary outcomes. Results: Eight RCTs with a total of 434 patients comparing mindfulness-based (4 RCTs) or acceptance-based interventions (4 RCTs) to treatment as usual or attention control were included. Six RCTs had low risk of bias. Moderate evidence was found for short-term effects on total psychotic symptoms, positive symptoms, hospitalization rates, duration of hospitalization, and mindfulness and for long-term effects on total psychotic symptoms and duration of hospitalization. No evidence was found for effects on negative symptoms, affect, or acceptance. No serious adverse events were reported. Conclusion: Mindfulness- and acceptance-based interventions can be recommended as an additional treatment for patients with psychosis. PMID:26937312

  9. 40 CFR 60.1135 - When must I accept comments on the siting analysis and revised materials separation plan?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 7 2013-07-01 2013-07-01 false When must I accept comments on the siting analysis and revised materials separation plan? 60.1135 Section 60.1135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance...

  10. 40 CFR 60.1135 - When must I accept comments on the siting analysis and revised materials separation plan?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false When must I accept comments on the siting analysis and revised materials separation plan? 60.1135 Section 60.1135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance...

  11. 40 CFR 60.1135 - When must I accept comments on the siting analysis and revised materials separation plan?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 7 2014-07-01 2014-07-01 false When must I accept comments on the siting analysis and revised materials separation plan? 60.1135 Section 60.1135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance...

  12. 40 CFR 60.1135 - When must I accept comments on the siting analysis and revised materials separation plan?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false When must I accept comments on the siting analysis and revised materials separation plan? 60.1135 Section 60.1135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance...

  13. 40 CFR 60.1135 - When must I accept comments on the siting analysis and revised materials separation plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I accept comments on the siting analysis and revised materials separation plan? 60.1135 Section 60.1135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance...

  14. Determination of the effective inelastic p anti-p cross-section for the D0 Run II luminosity measurement

    SciTech Connect

    Edwards, T.; Yacoob, S.; Andeen, T.; Begel, M.; Casey, B.C.K.; Partridge, R.; Schellman, H.; Sznajder, A.; /Rio de Janeiro State U.

    2004-11-01

    The authors determine the effective inelastic p{bar p} cross-section into the D0 Luminosity Monitor for all run periods prior to September 2004. This number is used to relate the measured inelastic collision rate to the delivered luminosity. The key ingredients are the inelastic p{bar p} cross-section, the Luminosity Monitor efficiency, and the modeling of kinematic distributions for various inelastic processes used to determine the detector acceptance. The resulting value is {sigma}{sub p{bar p},eff} = 46 {+-} 3 mb.

  15. Double folding analysis of 3He elastic and inelastic scattering to low lying states on 90Zr, 116Sn and 208Pb at 270 MeV

    NASA Astrophysics Data System (ADS)

    Marwa, N. El-Hammamy

    2015-03-01

    The experimental data on elastic and inelastic scattering of 270 MeV 3He particles to several low lying states in 90Zr, 116Sn and 208Pb are analyzed within the double folding model (DFM). Fermi density distribution (FDD) of target nuclei is used to obtain real potentials with different powers. DF results are introduced into a modified DWUCK4 code to calculate the elastic and inelastic scattering cross sections. Two choices of potentials form factors are used; Woods Saxon (WS) and Woods Saxon Squared (WS2) for real potential, while the imaginary part is taken as phenomenological Woods Saxon (PWS) and phenomenological Woods Saxon Squared (PWS2). This comparison provides information about the similarities and differences of the models used in calculations.

  16. Analysis of Large Quasistatic Deformations of Inelastic Solids by a New Stress Based Finite Element Method. Ph.D. Thesis Final Report

    NASA Technical Reports Server (NTRS)

    Reed, Kenneth W.

    1992-01-01

    A new hybrid stress finite element algorithm suitable for analyses of large quasistatic deformation of inelastic solids is presented. Principal variables in the formulation are the nominal stress rate and spin. The finite element equations which result are discrete versions of the equations of compatibility and angular momentum balance. Consistent reformulation of the constitutive equation and accurate and stable time integration of the stress are discussed at length. Examples which bring out the feasibility and performance of the algorithm conclude the work.

  17. Inelastic final-state interaction

    SciTech Connect

    Suzuki, Mahiko; Suzuki, Mahiko

    2007-10-29

    The final-state interaction in multichannel decay processes is systematically studied with application to B decay in mind. Since the final-state interaction is intrinsically interwoven with the decay interaction in this case, no simple phase theorem like"Watson's theorem" holds for experimentally observed final states. We first examine in detail the two-channel problem as a toy-model to clarify the issues and to remedy common mistakes made in earlier literature. Realistic multichannel problems are too challenging for quantitative analysis. To cope with mathematical complexity, we introduce a method of approximation that is applicable to the case where one prominent inelastic channel dominates over all others. We illustrate this approximation method in the amplitude of the decay B to pi K fed by the intermediate states of a charmed meson pair. Even with our approximation we need more accurate information of strong interactions than we have now. Nonetheless we are able to obtain some insight in the issue and draw useful conclusions on general features on the strong phases.

  18. Human Factors Process Task Analysis: Liquid Oxygen Pump Acceptance Test Procedure at the Advanced Technology Development Center

    NASA Technical Reports Server (NTRS)

    Diorio, Kimberly A.; Voska, Ned (Technical Monitor)

    2002-01-01

    This viewgraph presentation provides information on Human Factors Process Failure Modes and Effects Analysis (HF PFMEA). HF PFMEA includes the following 10 steps: Describe mission; Define System; Identify human-machine; List human actions; Identify potential errors; Identify factors that effect error; Determine likelihood of error; Determine potential effects of errors; Evaluate risk; Generate solutions (manage error). The presentation also describes how this analysis was applied to a liquid oxygen pump acceptance test.

  19. Descriptive analysis and U.S. consumer acceptability of 6 green tea samples from China, Japan, and Korea.

    PubMed

    Lee, Jeehyun; Chambers, Delores H

    2010-03-01

    In the past, green tea has been one of the least popular nonalcoholic beverages for U.S. consumers. However, green tea has been receiving attention because of its potential health benefits. Knowing which green tea flavor attributes contribute to consumer liking will help the fast growing green tea business including green tea importers, tea shops, and beverage companies to understand which characteristics are most accepted by U.S. consumers. The objectives of this study were (1) to examine differences in acceptability of commonly available loose leaf and bagged green teas available from the major exporters to the U.S. (Japan, Korea, and China) and (2) to determine which green tea flavor characteristics are related to consumers' liking. In the study, consumers from the U.S. evaluated 6 green tea samples from China, Japan, and Korea for acceptability. A highly trained panel also evaluated the green tea samples to provide descriptive sensory attributes that might be related to acceptability. We found that U.S. consumers liked green tea samples with lower flavor intensity and lower bitterness intensity. Consumers' acceptability of green tea was negatively correlated with spinach and animalic flavor and bitterness and astringency of green teas evaluated using descriptive sensory analysis, but the correlation was only moderate. To learn what green tea flavor characteristics influence consumers' liking, future studies using more green tea samples with different flavor profiles are needed. PMID:20492260

  20. Deep Inelastic Scattering and Related Phenomena

    NASA Astrophysics Data System (ADS)

    D'Agostini, G.; Nigro, A.

    1997-03-01

    The Table of Contents for the book is as follows: * Organization * Foreword * Welcome Address * PLENARY SESSION: "From Paris to Rome" * Deep Inelastic Physics with H1 * Recent Results from ZEUS * Overview of the Status of Polarised Structure Functions * Quarks and Gluons at Hadron Colliders * Deep Inelastic Scattering - Theory and Phenomenology * WORKING GROUP 1: Structure Functions * Inclusive Jet Cross Section Measurement at CDF * Measurement of Direct Photons by the DØ Experiment * MRS Parton Distributions * Global QCD Analysis, the Gluon Distribution, and High Et Inclusive Jet Data * F2 Measurement and QCD Analysis on 94 H1 Data * The ZEUS 1994 F2 Measurement * Measurement of the Total γ*p Cross Section at very Low x and Q2 at HERA * New Results on F2 Structure Functions * Proton Structure Function and Gluon Distribution Functions from Fermilab Experiment E665 * The Transition from the Photoproduction to the DIS Region * The BFKL Pomeron: Can It Be Detected? * BFKL/CCFM Phenomenology * Physics and Mathematics of Dynamical Partons * k⊥-Factorization and Perturbative Invariants at Small x * Double Scaling Violations * On the Asymptotic Behaviour of F2(x, Q2) * Double Logarithmic Scaling of F2 * Differential Charged Current Cross-Sections at HERA * Neutral Current ep Deep Inelastic Scattering at High Q2 and Limits on New Physics * Charm Production in Charged-Current DIS and Extraction of the Strange Sea Density * Extraction of the Gluon Density * On Problems in Extracting the Gluon Density from the Nucleon Structure Function Measurements * Inclusive Measurement of the Strong Coupling at HERA * A Measurement of R = σL/σT in Deep Inelastic Neutrino-Nucleon Scattering at the Tevatron * A Measurement of R = σL/σT in Deep Inelastic μ - p and μ - d Scattering * A Determination of the Longitudinal Proton Structure Function FL(x, Q2) at Low x at HERA * Prospects for Measuring R = σL/σT at HERA in 1966 Low-Energy Running * A Leading Order, in ln(1/x) as well as

  1. Competition of Brazil nut effect, buoyancy, and inelasticity induced segregation in a granular mixture

    NASA Astrophysics Data System (ADS)

    Brito, R.; Soto, R.

    2009-12-01

    It has been recently reported that a granular mixture in which grains differ in their restitution coefficients presents segregation: the more inelastic particles sink to the bottom. When other segregation mechanisms as buoyancy and the Brazil nut effect are present, the inelasticity induced segregation can compete with them. First, a detailed analysis, based on numerical simulations of two dimensional systems, of the competition between buoyancy and the inelasticity induced segregation is presented, finding that there is a transition line in the parameter space that determines which mechanism is dominant. In the case of neutrally buoyant particles having different sizes the inelasticity induced segregation can compete with the Brazil nut effect (BNE). Reverse Brazil nut effect (RBNE) could be obtained at large inelasticities of the intruder. At intermediate values, BNE and RBNE coexist and large inelastic particles are found both near the bottom and at the top of the system.

  2. Evaluating Acceptance and Commitment Therapy: An Analysis of a Recent Critique

    ERIC Educational Resources Information Center

    Gaudiano, Brandon A.

    2009-01-01

    Acceptance and commitment therapy (ACT) is a newer psychotherapy that has generated much clinical and research interest in recent years. However, the approach has begun to receive strong criticism from proponents of traditional cognitive-behavioral therapy (CBT). Hofmann and Asmundson (2008) recently compared and contrasted ACT and traditional…

  3. Evaluating Acceptance and Commitment Therapy: An Analysis of a Recent Critique

    ERIC Educational Resources Information Center

    Gaudiano, Brandon A.

    2011-01-01

    Acceptance and commitment therapy (ACT) is a newer psychotherapy that has generated much clinical and research interest in recent years. However, the approach has begun to receive strong criticism from proponents of traditional cognitive-behavioral therapy (CBT). Hofmann and Asmundson (2008) recently compared and contrasted ACT and traditional…

  4. Exposure to Pornography and Acceptance of Rape Myths: A Research Summary Using Meta-Analysis.

    ERIC Educational Resources Information Center

    Allen, Mike; And Others

    A study quantitatively summarized the literature examining the association between acceptance of rape myths and exposure to pornography to address disputes in the academic community regarding the consistency of such research. The entire collection of "Psychological Abstracts" and "Sociological Abstracts" was manually searched for articles relevant…

  5. The Changing Face of Scientific Discourse: Analysis of Genomic and Proteomic Database Usage and Acceptance.

    ERIC Educational Resources Information Center

    Brown, Cecelia

    2003-01-01

    Discusses the growth in use and acceptance of Web-based genomic and proteomic databases (GPD) in scholarly communication. Confirms the role of GPD in the scientific literature cycle, suggests GPD are a storage and retrieval mechanism for molecular biology information, and recommends that existing models of scientific communication be updated to…

  6. Electron Inelastic-Mean-Free-Path Database

    National Institute of Standards and Technology Data Gateway

    SRD 71 NIST Electron Inelastic-Mean-Free-Path Database (PC database, no charge)   This database provides values of electron inelastic mean free paths (IMFPs) for use in quantitative surface analyses by AES and XPS.

  7. Analysis of the acceptance of autonomous planetary science data collection by field of inquiry

    NASA Astrophysics Data System (ADS)

    Straub, Jeremy

    2015-06-01

    The acceptance of autonomous control technologies in planetary science has met significant resistance. Many within this scientific community question the efficacy of autonomous technologies for making decisions regarding what data to collect, how to process it and its processing. These technologies, however, can be used to significantly increase the scientific return on mission investment by removing limitations imposed by communications bandwidth constraints and communications and human decision making delays. A fully autonomous mission, in an ideal case, could be deployed, perform most of the substantive work itself (possibly relying on human assistance for dealing with any unexpected or unexplained occurrences) and return an answer to a scientific question along with data selected to allow scientists to validate software performance. This paper presents the results of a survey of planetary scientists which attempts to identify the root causes of the impediments to the use of this type of technology and identify pathways to its acceptance. Previous work considered planetary science as a single large community. This paper contrasts the differences in acceptance between component fields of planetary science.

  8. Efficacy and Acceptability of Orthokeratology for Slowing Myopic Progression in Children: A Systematic Review and Meta-Analysis

    PubMed Central

    Wen, Daizong; Huang, Jinhai; Chen, Hao; Bao, Fangjun; Savini, Giacomo; Calossi, Antonio; Chen, Haisi; Li, Xuexi; Wang, Qinmei

    2015-01-01

    Background. To evaluate the efficacy and acceptability of orthokeratology for slowing myopic progression in children with a well conducted evidence-based analysis. Design. Meta-analysis. Participants. Children from previously reported comparative studies were treated by orthokeratology versus control. Methods. A systematic literature retrieval was conducted in MEDLINE, EMBASE, Cochrane Library, World Health Organization International Clinical Trials Registry Platform, and ClinicalTrials.gov. The included studies were subjected to meta-analysis using Stata version 10.1. Main Outcome Measures. Axial length change (efficacy) and dropout rates (acceptability) during 2-year follow-up. Results. Eight studies involving 769 subjects were included. At 2-year follow-up, a statistically significant difference was observed in axial length change between the orthokeratology and control groups, with a weighted mean difference (WMD) of −0.25 mm (95% CI, −0.30 to −0.21). The pooled myopic control rate declined with time, with 55, 51, 51, and 41% obtained after 6, 12, 18, and 24 months of treatment, respectively. No statistically significant difference was obtained for dropout rates between the orthokeratology and control groups at 2-year follow-up (OR, 0.79; 95% CI, 0.52 to 1.22). Conclusions. Orthokeratology is effective and acceptable for slowing myopic progression in children with careful education and monitoring. PMID:26221539

  9. Hadron attenuation in deep inelastic lepton-nucleus scattering

    SciTech Connect

    Falter, T.; Cassing, W.; Gallmeister, K.; Mosel, U.

    2004-11-01

    We present a detailed theoretical investigation of hadron attenuation in deep inelastic scattering off complex nuclei in the kinematic regime of the HERMES experiment. The analysis is carried out in the framework of a probabilistic coupled-channel transport model based on the Boltzmann-Uehling-Uhlenbeck equation, which allows for a treatment of the final-state interactions beyond simple absorption mechanisms. Furthermore, our event-by-event simulations account for the kinematic cuts of the experiments as well as the geometrical acceptance of the detectors. We calculate the multiplicity ratios of charged hadrons for various nuclear targets relative to deuterium as a function of the photon energy {nu}, the hadron energy fraction z{sub h}=E{sub h}/{nu}, and the transverse momentum p{sub T}. We also confront our model results on double-hadron attenuation with recent experimental data. Separately, we compare the attenuation of identified hadrons ({pi}{sup {+-}}, {pi}{sup 0}, K{sup {+-}}, p, and p) on {sup 20}Ne and {sup 84}Kr targets with the data from the HERMES Collaboration and make predictions for a {sup 131}Xe target. At the end we turn towards hadron attenuation on {sup 63}Cu nuclei at EMC energies. Our studies demonstrate that (pre-)hadronic final-state interactions play a dominant role in the kinematic regime of the HERMES experiment while our present approach overestimates the attenuation at EMC energies.

  10. Resolve! Version 2.5: Flammable Gas Accident Analysis Tool Acceptance Test Plan and Test Results

    SciTech Connect

    LAVENDER, J.C.

    2000-10-17

    RESOLVE! Version 2 .5 is designed to quantify the risk and uncertainty of combustion accidents in double-shell tanks (DSTs) and single-shell tanks (SSTs). The purpose of the acceptance testing is to ensure that all of the options and features of the computer code run; to verify that the calculated results are consistent with each other; and to evaluate the effects of the changes to the parameter values on the frequency and consequence trends associated with flammable gas deflagrations or detonations.

  11. Pathway analysis approach for determining acceptable levels of contamination of radionuclides in soil

    SciTech Connect

    Till, J.E.; Moore, R.E.

    1988-09-01

    A methodology for determining acceptable levels for decontamination of soil containing radionuclides at waste sites is described. This methodology calculates the annual radiation dose that an individual receives while living on property that has been decommissioned and decontaminated. Pathways of exposure include direct radiation from ground surfaces, ingestion of contaminated food, inhalation of resuspended radionuclides and drinking contaminated water. Results calculated using this methodology were compared with U.S. Department of Energy (DOE) guidelines for a southeastern U.S. site. There is good agreement between the two methods provided similar assumptions are used.

  12. Generosity motivated by acceptance--evolutionary analysis of an anticipation game.

    PubMed

    Zisis, I; Di Guida, S; Han, T A; Kirchsteiger, G; Lenaerts, T

    2015-01-01

    We here present both experimental and theoretical results for an Anticipation Game, a two-stage game wherein the standard Dictator Game is played after a matching phase wherein receivers use the past actions of dictators to decide whether to interact with them. The experimental results for three different treatments show that partner choice induces dictators to adjust their donations towards the expectations of the receivers, giving significantly more than expected in the standard Dictator Game. Adding noise to the dictators' reputation lowers the donations, underlining that their actions are determined by the knowledge provided to receivers. Secondly, we show that the recently proposed stochastic evolutionary model where payoff only weakly drives evolution and individuals can make mistakes requires some adaptations to explain the experimental results. We observe that the model fails in reproducing the heterogeneous strategy distributions. We show here that by explicitly modelling the dictators' probability of acceptance by receivers and introducing a parameter that reflects the dictators' capacity to anticipate future gains produces a closer fit to the aforementioned strategy distributions. This new parameter has the important advantage that it explains where the dictators' generosity comes from, revealing that anticipating future acceptance is the key to success. PMID:26658632

  13. DECOM: A pathway analysis approach for determining acceptable levels of contamination of radionuclides in soil

    SciTech Connect

    Till, J.E.; Moore, R.E.

    1986-02-28

    The purpose of this report is to describe a method for determining acceptable levels for decontamination of soil containing radionuclides at waste sites located on the Savannah River Plant. This task was achieved through development of a computer program called ''DECOM.'' The DECOM code is written in BASIC, runs on an IBM microcomputer (AT, XT, or compatible), is interactive, and calculates the annual radiation dose that an individual receives while living on property that has been decommissioned and decontaminated. User selected pathways of exposure include direct radiation from ground surface, ingestion of contaminated food, inhalation of resuspended radionuclides, and drinking contaminated water. The program requires a minimum of knowledge in radiological assessment. Although default values have been provided for most parameters, the methodology requires the user to define an acceptable effective dose equivalent that the resident can receive. Other input data required to run the code include the concentration of radionuclides in soil and some site specific parameters relating to the characteristics of the area. 37 refs., 2 figs., 4 tabs.

  14. Constraints on inelastic dark matter from XENON10

    SciTech Connect

    Angle, J; Aprile, E; Arneodo, F; Baudis, L; Bernstein, A; Bolozdynya, A; Coelho, L C; Dahl, C E; DeViveiros, L; Ferella, A D; Fernandes, L P; Fiorucci, S; Gaitskell, R J; Giboni, K L; Gomez, R; Hasty, R; Kastens, L; Kwong, J; Lopes, J M; Madden, N; Manalaysay, A; Manzur, A; McKinsey, D N; Monzani, M E; Ni, K; Oberlack, U; Orboeck, J; Plante, G; Santorelli, R; dos Santos, J; Shagin, P; Shutt, T; Sorensen, P; Schulte, S; Winant, C; Yamashita, M

    2009-11-23

    It has been suggested that dark matter particles which scatter inelastically from detector target nuclei could explain the apparent incompatibility of the DAMA modulation signal (interpreted as evidence for particle dark matter) with the null results from CDMS-II and XENON10. Among the predictions of inelastically interacting dark matter are a suppression of low-energy events, and a population of nuclear recoil events at higher nuclear recoil equivalent energies. This is in stark contrast to the well-known expectation of a falling exponential spectrum for the case of elastic interactions. We present a new analysis of XENON10 dark matter search data extending to E{sub nr} = 75 keV nuclear recoil equivalent energy. Our results exclude a significant region of previously allowed parameter space in the model of inelastically interacting dark matter. In particular, it is found that dark matter particle masses m{sub x} {approx}> 150 GeV are disfavored.

  15. Comparative analysis of inelastic strain recovery and plastic deformation in a Ti49.1Ni50.9 (at %) alloy under torsion and bending

    NASA Astrophysics Data System (ADS)

    Grishkov, V. N.; Lotkov, A. I.; Baturin, A. A.; Timkin, V. N.; Zhapova, D. Yu.

    2015-10-01

    The paper reports on an experimental study of inelastic strain recovery, due to superelasticity and shape-memory effects, and plastic deformation under torsion and bending in a binary TiNi alloy containing 50.9 at % of Ni. It is found that the material under torsion and bending displays an anomalously high superelasticity of 16.4% and 13.5% and total recovery strain of 24.6% and 16.4% which exceed the theoretical limit of recoverable strain equal to 10.3% in the alloy involved in a cubic B2 to monoclinic B19' phase transformation. The correlation between the high recovery strains and the intensity and mechanisms of plastic deformation with increasing total strain is discussed.

  16. Development and analysis of acceptance of a nutrition education package among a rural elderly population: an action research study

    PubMed Central

    2012-01-01

    Background It is well known that older adults are often vulnerable to malnutrition. This action research was conducted to develop a nutrition education package for promoting healthy ageing and reducing risk of chronic diseases among older adults in a rural area of Malaysia. Methods This study was designed and conducted in three stages, including needs assessment, development of the package and analysis of acceptance among 33 older adults aged 60 years and over in rural communities, and 14 health staff members at rural health clinics. Subjects completed a questionnaire including sociodemographic factors and acceptance evaluation of the nutrition education package with respect to content, graphics and design. Data were analysed descriptively using numbers and percentages. Results A nutrition education package comprising a booklet, flipchart and placemats was developed. A total of 42.4% of the older adults expressed that the sentences in the flipchart needed to be simplified and medical terms explained. Terminology (60%), illustrations (20%) and nutrition recommendations (20%) were the aspects that prevented elderly subjects from fully understanding the booklet. Information on the placemats was easily understood by subjects. Conclusions A well accepted nutrition education package for promoting healthy ageing and reducing risk of chronic diseases was developed that incorporated modifications based on feedback from older adult subjects and health clinic staff in a rural area. It is a tool that can effectively be used for health education in this population. PMID:22676577

  17. [Independence, consciously accepted dependency, self-responsibility and shared responsibility as key categories of an ethical analysis of old age].

    PubMed

    Kruse, A

    2005-08-01

    This contribution begins with a brief introduction into some seminal problems of ethics: the search for the essential being of things, the attitude of value consciousness in the context of ethical reflections, and the reflection on models of a 'good life' and on decisions as well as actions in significant moral situations. These introductory statements are illustrated by the example of stoic philosophy. In a second step, independence, consciously accepted dependency, self-responsibility and shared responsibility are discussed as highly significant categories for an ethical analysis of all ages. However these categories must be specified with reference to specific ages. In this contribution, such a specification is carried out for old age focussing on the particular relevance of the four categories for ethical analysis. In a third step, each of the four categories is discussed in detail in the context of basic ethical approaches. In this context, ethical analysis proceeds from the perspectives of the individual, the environment, and the society. Concerning the perspective of the society special interest is offered to societal models of good life in old age which might have an impact on the potential development of a pro-aging culture and shared responsibility in older people. Moreover, these models contribute to older people's ability to use the necessary means of support in cases of dependency and to consciously accept dependency. PMID:16133757

  18. Inelastic behavior of structural components

    NASA Technical Reports Server (NTRS)

    Hussain, N.; Khozeimeh, K.; Toridis, T. G.

    1980-01-01

    A more accurate procedure was developed for the determination of the inelastic behavior of structural components. The actual stress-strain curve for the mathematical of the structure was utilized to generate the force-deformation relationships for the structural elements, rather than using simplified models such as elastic-plastic, bilinear and trilinear approximations. relationships were generated for beam elements with various types of cross sections. In the generational of these curves, stress or load reversals, kinematic hardening and hysteretic behavior were taken into account. Intersections between loading and unloading branches were determined through an iterative process. Using the inelastic properties obtained, the plastic static response of some simple structural systems composed of beam elements was computed. Results were compared with known solutions, indicating a considerable improvement over response predictions obtained by means of simplified approximations used in previous investigations.

  19. A comparative analysis of acceptance by Japanese females and price of goat milk from different sources.

    PubMed

    Ozawa, Takeyuki; Takada, Ruriko; Nishitani, Jiro; Fujita, Masaru; Blair, Hugh T

    2010-04-01

    A sensory survey was carried out using 4 different types of whole goat milk among middle-class females to investigate consumer acceptability of goat milk and whether there is an opportunity to expand the sale of goat milk products in Japan. Four different types of whole milk powder (domestic concentrate-fed, domestic pasture-fed, USA commercially canned, and New Zealand commercially canned) were used. Fresh cow milk was served as a control. Thirty-one housewives evaluated the 5 liquid milk samples for smell, taste and overall characteristics on a scale of 1 (low) to 3 (high). Chi-square analyses were carried out to detect significant differences between the milk types in each category. The goat milk from the USA was the most preferred goat milk with respect to smell and overall evaluation. Domestic pasture-fed milk received the lowest grade in the evaluation for its 'grassy and goaty' smell. This result shows us that pasture intake affects the taste and smell of powdered milk which gives the lowest evaluation by the participants. If Japanese goat milk producers want to be successful in the domestic goat milk market and compete against goat milk products from other countries, they should improve production methods and flavor of their products. PMID:20438510

  20. Characterization of Tank 23H Supernate Per Saltstone Waste Acceptance Criteria Analysis Requirements -2005

    SciTech Connect

    Oji, L

    2005-05-05

    Variable depth Tank 23H samples (22-inch sample [HTF-014] and 185-inch sample [HTF-013]) were pulled from Tank 23H in February, 2005 for characterization. The characterization of the Tank 23H low activity waste is part of the overall liquid waste processing activities. This characterization examined the species identified in the Saltstone Waste Acceptance Criteria (WAC) for the transfer of waste into the Salt-Feed Tank (SFT). The samples were delivered to the Savannah River National Laboratory (SRNL) and analyzed. Apart from radium-226 with an average measured detection limit of < 2.64E+03 pCi/mL, which is about the same order of magnitude as the WAC limit (< 8.73E+03 pCi/mL), none of the species analyzed was found to approach the limits provided in the Saltstone WAC. The concentration of most of the species analyzed for the Tank 23H samples were 2-5 orders of magnitude lower than the WAC limits. The achievable detection limits for a number of the analytes were several orders of magnitude lower than the WAC limits, but one or two orders of magnitude higher than the requested detection limits. Analytes which fell into this category included plutonium-241, europium-154/155, antimony-125, tin-126, ruthenium/rhodium-106, selenium-79, nickel-59/63, ammonium ion, copper, total nickel, manganese and total organic carbon.

  1. Characterization of Tank 23H Supernate Per Saltstone Waste Acceptance Criteria Analysis Requirements-2005

    SciTech Connect

    Oji, L

    2005-06-01

    Variable depth Tank 23H samples (22-inch sample [HTF-014] and 185-inch sample [HTF-013]) were pulled from Tank 23H in February, 2005 for characterization. The characterization of the Tank 23H low activity waste is part of the overall liquid waste processing activities. This characterization examined the species identified in the Saltstone Waste Acceptance Criteria (WAC) for the transfer of waste into the Salt-Feed Tank (SFT). The samples were delivered to the Savannah River National Laboratory (SRNL) and analyzed. Apart from radium-226 with an average measured detection limit of < 2.64E+03 pCi/mL, which is about the same order of magnitude as the WAC limit (< 8.73E+03 pCi/mL), none of the species analyzed was found to approach the limits provided in the Saltstone WAC. The concentration of most of the species analyzed for the Tank 23H samples were 2-5 orders of magnitude lower than the WAC limits. The achievable detection limits for a number of the analytes were several orders of magnitude lower than the WAC limits, but one or two orders of magnitude higher than the requested detection limits. Analytes which fell into this category included plutonium-241, europium-154/155, antimony-125, tin-126, ruthenium/rhodium-106, selenium-79, nickel-59/63, ammonium ion, copper, total nickel, manganese and total organic carbon.

  2. Inelastic deformation of metal matrix composites

    NASA Technical Reports Server (NTRS)

    Lissenden, C. J.; Herakovich, C. T.; Pindera, M-J.

    1993-01-01

    A theoretical model capable of predicting the thermomechanical response of continuously reinforced metal matrix composite laminates subjected to multiaxial loading was developed. A micromechanical model is used in conjunction with nonlinear lamination theory to determine inelastic laminae response. Matrix viscoplasticity, residual stresses, and damage to the fiber/matrix interfacial zone are explicitly included in the model. The representative cell of the micromechanical model is considered to be in a state of generalized plane strain, enabling a quasi two-dimensional analysis to be performed. Constant strain finite elements are formulated with elastic-viscoplastic constitutive equations. Interfacial debonding is incorporated into the model through interface elements based on the interfacial debonding theory originally presented by Needleman, and modified by Tvergaard. Nonlinear interfacial constitutive equations relate interfacial tractions to displacement discontinuities at the interface. Theoretical predictions are compared with the results of an experimental program conducted on silicon carbide/titanium (SiC/Ti) unidirectional, (O4), and angle-ply, (+34)(sub s), tubular specimens. Multiaxial loading included increments of axial tension, compression, torque, and internal pressure. Loadings were chosen in an effort to distinguish inelastic deformation due to damage from matrix plasticity and separate time-dependent effects from time-independent effects. Results show that fiber/matrix debonding is nonuniform throughout the composite and is a major factor in the effective response. Also, significant creep behavior occurs at relatively low applied stress levels at room temperature.

  3. Acceptance of Internet-Based Health Care Services Among Households in Poland: Secondary Analysis of a Population-Based Survey

    PubMed Central

    2012-01-01

    Background Polish society is benefiting from growing access to the Internet, but the use of advanced e-services is still limited. The provision of Internet-based health services depends not only on the penetration of the Internet into society, but also on the acceptance of this technology by potential users. Objective The main objective of this study was focused on the assessment of predictors of acceptance of Internet use for provision of health services (eg, sociodemographic status, the use of information technologies, and consumption of health care services) among households in Poland. Methods The study was based on a secondary analysis of the dataset from the 2011 Social Diagnosis survey (a biannual survey conducted since 2001 about economic and non-economic aspects of household and individual living conditions in Poland). Analysis of the questionnaire results focused on the situations of the households included in the study. The predictors for 2 outcome variables describing the acceptance of households for Internet use for provision of a full health care service, or at least access to information and download of required forms, were assessed using multivariate logistic regression. Results After excluding those households that would not consider the use of health care services or for which predictor variables assumed missing values, the final analyses were conducted on data from 8915 households. Acceptance of the use of the Internet for provision of full health care services in Polish households was significantly higher among households in urban locations with ≥ 200,000 inhabitants than among households in rural areas; it was also higher with salaried employment as the source of income than with self-employment in agriculture (odds ratio [OR] = 0.53, 95% CI 0.40 - 0.70), retirement pension (OR = 0.46, 95% CI 0.39 - 0.54), disability pension (OR = 0.48, 95% CI 0.34 - 0.68), or with several simultaneous income sources (OR = 0.66; 95% CI 0.57 - 0

  4. Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

    NASA Technical Reports Server (NTRS)

    Diorio, Kimberly A.

    2002-01-01

    A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

  5. Improved constraints on inelastic dark matter

    SciTech Connect

    Schmidt-Hoberg, Kai; Winkler, Martin Wolfgang E-mail: mwinkler@ph.tum.de

    2009-09-01

    We perform an extensive study of the DAMA annual modulation data in the context of inelastic dark matter. We find that inelastic dark matter with mass m{sub χ}∼>15 GeV is excluded at the 95% confidence level by the combination of DAMA spectral information and results from other direct detection experiments. However, at smaller m{sub χ}, inelastic dark matter constitutes a possible solution to the DAMA puzzle.

  6. Heisenberg Model Analysis on Inelastic Powder Neutron Scattering Data Using Pure and K doped BaMn2 As2 samples

    NASA Astrophysics Data System (ADS)

    Ramazanoglu, Mehmet; Sapkota, A.; Pandey, A.; Johnston, D.; Goldman, Alan; Kreyssig, A.; Abernathy, D.; Niedziela, J.; Stone, M.; McQueeney, R. J.

    Low temperature powder inelastic neutron scattering measurements (INS) were performed on powders of Ba(1-x)KxMn2As2 with x=0(BMA),0.125 and 0.25. BMA is a G type antiferromagnet (AFM) which has local magnetic modulations bridging between the pnictide and cuprate superconductors. Hole doping (K) introduces more metallic behavior. The magnetic contribution to the intensities were retrieved by subtracting the estimated phonon background obtained at high momentum transfers from the raw. The resultant estimated magnetic intensities were analyzed by using damped harmonic oscillator model. The K doping effects create a broadening in the magnetic peak profiles consistent with expected weak FM fluctuations. We also analyzed the INS data using a powder integration routine which is based on J1-J2-Jz Heisenberg Model. The Monte Carlo integration technique is used to obtain the powder-averaged S(Q,E) for a series of Js. The representative values (with lowest chi-squared) obtained for BMA are in agreement with previous results. The values obtained for K doped samples were found in the close proximity to the parent ones. Overall we conclude that the original AFM structure seen in BMA retained its character even in the K doped samples with minimal differences. Work at Ames Laboratory is supported by USDOE under Contract No. DE-AC02-07CH11358 and Work at ITU is supported by TUBITAK 2232.

  7. Comparative efficacy and acceptability of psychotherapies for depression in children and adolescents: A systematic review and network meta-analysis

    PubMed Central

    Zhou, Xinyu; Hetrick, Sarah E; Cuijpers, Pim; Qin, Bin; Barth, Jürgen; Whittington, Craig J; Cohen, David; Del Giovane, Cinzia; Liu, Yiyun; Michael, Kurt D; Zhang, Yuqing; Weisz, John R; Xie, Peng

    2015-01-01

    Previous meta-analyses of psychotherapies for child and adolescent depression were limited because of the small number of trials with direct comparisons between two treatments. A network meta-analysis, a novel approach that integrates direct and indirect evidence from randomized controlled studies, was undertaken to investigate the comparative efficacy and acceptability of psychotherapies for depression in children and adolescents. Systematic searches resulted in 52 studies (total N=3805) of nine psychotherapies and four control conditions. We assessed the efficacy at post-treatment and at follow-up, as well as the acceptability (all-cause discontinuation) of psychotherapies and control conditions. At post-treatment, only interpersonal therapy (IPT) and cognitive-behavioral therapy (CBT) were significantly more effective than most control conditions (standardized mean differences, SMDs ranged from −0.47 to −0.96). Also, IPT and CBT were more beneficial than play therapy. Only psychodynamic therapy and play therapy were not significantly superior to waitlist. At follow-up, IPT and CBT were significantly more effective than most control conditions (SMDs ranged from −0.26 to −1.05), although only IPT retained this superiority at both short-term and long-term follow-up. In addition, IPT and CBT were more beneficial than problem-solving therapy. Waitlist was significantly inferior to other control conditions. With regard to acceptability, IPT and problem-solving therapy had significantly fewer all-cause discontinuations than cognitive therapy and CBT (ORs ranged from 0.06 to 0.33). These data suggest that IPT and CBT should be considered as the best available psychotherapies for depression in children and adolescents. However, several alternative psychotherapies are understudied in this age group. Waitlist may inflate the effect of psychotherapies, so that psychological placebo or treatment-as-usual may be preferable as a control condition in psychotherapy

  8. The Development, Validation, and Analysis of Measurement Invariance of the Technology Acceptance Measure for Preservice Teachers (TAMPST)

    ERIC Educational Resources Information Center

    Teo, Timothy

    2010-01-01

    This article describes the development, validation, and measurement invariance of scores from a survey designed to measure preservice teachers' reported acceptance of technology. Drawing from conceptual models in the areas of information systems and technology acceptance, a five-factor Technology Acceptance Measure for Preservice Teachers (TAMPST)…

  9. Nonlinear, inelastic fast reactor subassembly interaction analyses

    SciTech Connect

    Sutherland, W.H.; Bard, F.E.

    1983-01-01

    Liquid Metal Fast Breeder Reactor (LMFBR) core structural design is complicated by the trade-offs associated with keeping the subassemblies closely packed for the neutronic considerations and accommodating the volumetric changes associated with irradiation swelling. The environmental variation across the reactor core results in temperature and neutron flux gradients across the subassemblies which in turn cause the subassemblies to bow as well as dilate and grow volumetrically. These deformations in a tightly packed reactor core cause the subassemblies to interact and can potentially result in excessive withdrawal loads during the refueling operations. ABADAN, a general purpose, nonlinear, inelastic, multi-dimensional finite element structural analysis computer code, was developed for the express purpose of solving large nonlinear problems as typified by the above interaction problems. For the subassembly interaction problem ABADAN has been applied to the solution of an interacting radial row of Fast Flux Test Facility (FFTF) fuel assemblies.

  10. Inelastic spin depolarization spectroscopy in silicon

    NASA Astrophysics Data System (ADS)

    Li, Jing; Appelbaum, Ian

    2013-07-01

    In ballistic injection spin transport devices, a tunnel junction emitter bias voltage determines the energy at which spin-polarized hot electrons cross a Schottky barrier into the conduction band of a semiconductor collector. Fast energy relaxation via phonon emission restores equilibrium for subsequent transport at the band edge. Through an analysis incorporating voltage-dependent measurement of magnetocurrent polarization in silicon spin transport devices along with magnetic-tunnel- and spin-valve-transistor configurations, the contribution to total spin depolarization caused by this inelastic scattering in the presence of spin-orbit interaction is quantified. From the shape of this spectroscopy, it is found that all measured spin depolarization can be accounted for solely by considering spin relaxation during bulk transport in quasi-equilibrium near the conduction band edge; the relaxation of initial spin state is irrelevant to the spin-dependent device characteristics.

  11. Aligned breakup of heavy nuclear systems as a new type of deep inelastic collisions at small impact parameters

    SciTech Connect

    Wilczynski, J.; Swiderski, L.; Pagano, A.; Cardella, G.; De Filippo, E.; La Guidara, E.; Papa, M.; Pirrone, S.; Amorini, F.; Anzalone, A.; Cavallaro, S.; Colonna, M.; Di Toro, M.; Maiolino, C.; Porto, F.; Rizzo, F.; Russotto, P.; Auditore, L.

    2010-06-15

    An interesting process of violent reseparation of a heavy nuclear system into three or four fragments of comparable size was recently observed in {sup 197}Au+{sup 197}Au collisions at 15 MeV/nucleon. Combined analysis of the binary deep inelastic events and the ternary and quaternary breakup events demonstrates that the newly observed ternary and quaternary reactions belong to the same wide class of deep inelastic collisions as the conventional (binary) damped reactions. It is shown that the ternary and quaternary breakup reactions occur at extremely inelastic collisions corresponding to small impact parameters, while more peripheral collisions lead to well-known binary deep inelastic reactions.

  12. The 3-D inelastic analyses for computational structural mechanics

    NASA Technical Reports Server (NTRS)

    Hopkins, D. A.; Chamis, C. C.

    1989-01-01

    The 3-D inelastic analysis method is a focused program with the objective to develop computationally effective analysis methods and attendant computer codes for three-dimensional, nonlinear time and temperature dependent problems present in the hot section of turbojet engine structures. Development of these methods was a major part of the Hot Section Technology (HOST) program over the past five years at Lewis Research Center.

  13. Intrinsic radial sensitivity of nucleon inelastic scattering

    NASA Astrophysics Data System (ADS)

    Kelly, J. J.

    1988-02-01

    A linear expansion analysis of the folding model transition amplitude is used to study the intrinsic sensitivity of the inelastic scattering of intermediate energy nucleons to the radial form of the neutron transition density, given known proton transition densities from electron scattering. Realistic density-dependent effective interactions are used to construct pseudodata. These pseudodata are then reanalyzed and the error matrix is used to calculate an error band for the radial transition density. This approach reveals the sensitivity of the extracted transition density to absorption, medium modifications of the interaction, and the extent and quality of the data in a manner that is largely free of the residual inaccuracies in reaction theory that complicate the analysis of real data. We find that the intrinsic radial sensitivity of nucleon inelastic scattering is best for projectile energies between 200 and 500 MeV, but is adequate to resolve the radial dependence of neutron transition densities even in the interior of heavy nuclei throughout the energy regime 100-800 MeV. We have also compared our method with scale-factor analyses which assume proportionality between neutron and proton densities. For states whose transition densities are similar in the surface, we find scaling to be accurate at the 20% level. However, for light nuclei substantial deviations beyond the first peak of the differential cross section reveal sensitivity to shape differences. This sensitivity is reduced for heavy nuclei. The model dependence of radial densities is also studied. A high-q constraint is used to analyze the contribution of incompleteness error to the deduced error bands and to reduce the model dependence.

  14. Probabilistic description of particle transport. III. Inelastic scattering

    SciTech Connect

    Goulet, T.; Keszei, E.; Jay-Gerin, J. Departement de Medecine Nucleaire et de Radiobiologie, Faculte de Medecine, Universite de Sherbrooke, Sherbrooke, PQ )

    1990-06-01

    We extend our probabilistic model of quasielastic particle transport to include possible inelastic scatterings of the particles in the bulk of the studied media. We show that this extended model can be used to describe different types of experiments involving electrons that go through or are reflected by a plane-parallel layer deposited on a substrate. In particular, we reanalyze the experimental results of low-energy ({approx lt}10 eV) electron transmission through solid xenon and solid molecular nitrogen. This analysis shows that the extended model is consistent with the quasielastic one, but is more powerful since we can now determine both the elastic and inelastic electron mean free paths. The analysis allows one to study the threshold creation of excitons that can be observed at about 8.5 and 9.5 eV in solid xenon, and around 7.5 eV in solid molecular nitrogen.

  15. An Elaboration Likelihood Model Based Longitudinal Analysis of Attitude Change during the Process of IT Acceptance via Education Program

    ERIC Educational Resources Information Center

    Lee, Woong-Kyu

    2012-01-01

    The principal objective of this study was to gain insight into attitude changes occurring during IT acceptance from the perspective of elaboration likelihood model (ELM). In particular, the primary target of this study was the process of IT acceptance through an education program. Although the Internet and computers are now quite ubiquitous, and…

  16. Acceptance speech.

    PubMed

    Yusuf, C K

    1994-01-01

    I am proud and honored to accept this award on behalf of the Government of Bangladesh, and the millions of Bangladeshi children saved by oral rehydration solution. The Government of Bangladesh is grateful for this recognition of its commitment to international health and population research and cost-effective health care for all. The Government of Bangladesh has already made remarkable strides forward in the health and population sector, and this was recognized in UNICEF's 1993 "State of the World's Children". The national contraceptive prevalence rate, at 40%, is higher than that of many developed countries. It is appropriate that Bangladesh, where ORS was discovered, has the largest ORS production capacity in the world. It was remarkable that after the devastating cyclone in 1991, the country was able to produce enough ORS to meet the needs and remain self-sufficient. Similarly, Bangladesh has one of the most effective, flexible and efficient control of diarrheal disease and epidemic response program in the world. Through the country, doctors have been trained in diarrheal disease management, and stores of ORS are maintained ready for any outbreak. Despite grim predictions after the 1991 cyclone and the 1993 floods, relatively few people died from diarrheal disease. This is indicative of the strength of the national program. I want to take this opportunity to acknowledge the contribution of ICDDR, B and the important role it plays in supporting the Government's efforts in the health and population sector. The partnership between the Government of Bangladesh and ICDDR, B has already borne great fruit, and I hope and believe that it will continue to do so for many years in the future. Thank you. PMID:12345479

  17. Acceptance speech.

    PubMed

    Carpenter, M

    1994-01-01

    In Bangladesh, the assistant administrator of USAID gave an acceptance speech at an awards ceremony on the occasion of the 25th anniversary of oral rehydration solution (ORS). The ceremony celebrated the key role of the International Centre for Diarrhoeal Disease Research, Bangladesh (ICDDR,B) in the discovery of ORS. Its research activities over the last 25 years have brought ORS to every village in the world, preventing more than a million deaths each year. ORS is the most important medical advance of the 20th century. It is affordable and client-oriented, a true appropriate technology. USAID has provided more than US$ 40 million to ICDDR,B for diarrheal disease and measles research, urban and rural applied family planning and maternal and child health research, and vaccine development. ICDDR,B began as the relatively small Cholera Research Laboratory and has grown into an acclaimed international center for health, family planning, and population research. It leads the world in diarrheal disease research. ICDDR,B is the leading center for applied health research in South Asia. It trains public health specialists from around the world. The government of Bangladesh and the international donor community have actively joined in support of ICDDR,B. The government applies the results of ICDDR,B research to its programs to improve the health and well-being of Bangladeshis. ICDDR,B now also studies acute respiratory diseases and measles. Population and health comprise 1 of USAID's 4 strategic priorities, the others being economic growth, environment, and democracy, USAID promotes people's participation in these 4 areas and in the design and implementation of development projects. USAID is committed to the use and improvement of ORS and to complementary strategies that further reduce diarrhea-related deaths. Continued collaboration with a strong user perspective and integrated services will lead to sustainable development. PMID:12345470

  18. Applicability of Two Universally Accepted Mixed Dentition Analysis on a Sample from Southeastern Region of Andhra Pradesh, India

    PubMed Central

    Shobha, MB; AJS, Sai; Manoj, KMG; Srideevi, E; Sridhar, M; Pratap, GMJS

    2016-01-01

    Background: Most of the universally accepted mixed dentition analyses are based on the data derived from northwestern European descent. However, the accuracy of these methods when applied to different ethnic population is questionable. Aim: The present study is aimed to evaluate the applicability of Tanaka and Johnston (TJ) and Moyers (50th and 75th percentile) mixed dentition analysis in a sample from south-eastern region of Andhra Pradesh, India. Subjects and Methods: Study models were prepared from a sample of 100 patients (50 males and 50 females) in the age range of 13-15 years. The mesio-distal dimension of the teeth was measured using a Digital Vernier calipers. The actual values of permanent canine and premolars on the casts were compared with the predicted values from TJ and Moyers analysis. The values derived from this study were statistically analyzed using SPSS version 17.0 (IBM, Chicago, USA). Pearson's coefficients were used to evaluate the correlations between the groups of teeth. Results: Overestimated values were noticed in males and females of both arches with TJ equation; Males showed no significant difference at Moyers 50th percentile (50/100), in both the arches where as females showed higher values in mandibular arch and underestimated values in maxillary arch. At Moyers 75th percentile, overestimated values were noticed in males for both the arches whereas in females lesser values were observed. Conclusion: As the values showed significant deviation from TJ and Moyers both at 50 and 75 percentile, its applicability to the present population is limited. So, new regression equations were derived. PMID:27398250

  19. Monte Carlo Calculation of Thermal Neutron Inelastic Scattering Cross Section Uncertainties by Sampling Perturbed Phonon Spectra

    NASA Astrophysics Data System (ADS)

    Holmes, Jesse Curtis

    Nuclear data libraries provide fundamental reaction information required by nuclear system simulation codes. The inclusion of data covariances in these libraries allows the user to assess uncertainties in system response parameters as a function of uncertainties in the nuclear data. Formats and procedures are currently established for representing covariances for various types of reaction data in ENDF libraries. This covariance data is typically generated utilizing experimental measurements and empirical models, consistent with the method of parent data production. However, ENDF File 7 thermal neutron scattering library data is, by convention, produced theoretically through fundamental scattering physics model calculations. Currently, there is no published covariance data for ENDF File 7 thermal libraries. Furthermore, no accepted methodology exists for quantifying or representing uncertainty information associated with this thermal library data. The quality of thermal neutron inelastic scattering cross section data can be of high importance in reactor analysis and criticality safety applications. These cross sections depend on the material's structure and dynamics. The double-differential scattering law, S(alpha, beta), tabulated in ENDF File 7 libraries contains this information. For crystalline solids, S(alpha, beta) is primarily a function of the material's phonon density of states (DOS). Published ENDF File 7 libraries are commonly produced by calculation and processing codes, such as the LEAPR module of NJOY, which utilize the phonon DOS as the fundamental input for inelastic scattering calculations to directly output an S(alpha, beta) matrix. To determine covariances for the S(alpha, beta) data generated by this process, information about uncertainties in the DOS is required. The phonon DOS may be viewed as a probability density function of atomic vibrational energy states that exist in a material. Probable variation in the shape of this spectrum may be

  20. Fingerprints of the superconducting pairing glue via inelastic tunneling spectroscopy

    NASA Astrophysics Data System (ADS)

    Hlobil, Patrik; Schmalian, Jörg; Jandke, Jasmin; Wulfhekel, Wulf

    In the past, tunneling spectroscopy has been interpreted as a direct probe of the fermionic density of states in superconductors. However, in this talk we discuss the impact of inelastic tunneling on tunnel spectra and show that depending on the actual system these interpretations have to be revisited. We show how such inelastic tunneling processes can occur in bulk systems and how they affect the analysis of the experimental data. Considering the spin-gap for spin excitations in the high-Tc superconductors we can trace back the peak-dip-hump features observed in many unconventional superconductors to the shift of the spin spectral weight to higher energies below the critical temperature Tc .

  1. Rovibrationally Inelastic Collisions of Ultracold Lithium Dimer

    NASA Astrophysics Data System (ADS)

    Jasmine, William; Stewart, Brian

    2016-05-01

    We have calculated cross sections for rovibrationally inelastic collisions of Li2 A(1) 1Σu+ colliding with neon and xenon on ab initio potentials. We find that the inelastic cross section can be very large and increasing at low collision velocity. This behavior is very well modeled as a Langevin process. The total inelastic cross section is a sizable fraction of the total capture cross section, typically about a third. For Li2 - Xe, the total inelastic rate constants are several thousand square angstroms, and level-to-level rate constants are several hundred square angstroms at collision speeds below 1000 cm/s, implying that such collisions might be observable in photoassociated lithium dimer.

  2. Classroom engagement mediates the effect of teacher–student support on elementary students’ peer acceptance: A prospective analysis

    PubMed Central

    Hughes, Jan N.; Kwok, Oi-man

    2010-01-01

    Participants were 360 (52.2% male) ethnically diverse and academically at-risk first-grade children attending one of three school districts in southeast and central Texas. Using latent variable structural equation modeling, we tested a theoretical model positing that the quality of the teacher–student relationship in first grade predicts children’s peer acceptance the following year, controlling for children’s previous externalizing problems and peer acceptance. We also expected that children’s classroom engagement would mediate the effect of teacher–student relationship quality on peer acceptance. The hypothesized model provided a good fit to the data. Engagement fully mediated the effect of teacher support on subsequent peer acceptance. Neither ethnicity nor gender moderated the mediation findings. PMID:20431706

  3. Intramuscular pressures beneath elastic and inelastic leggings

    NASA Technical Reports Server (NTRS)

    Murthy, G.; Ballard, R. E.; Breit, G. A.; Watenpaugh, D. E.; Hargens, A. R.

    1994-01-01

    Leg compression devices have been used extensively by patients to combat chronic venous insufficiency and by astronauts to counteract orthostatic intolerance following spaceflight. However, the effects of elastic and inelastic leggings on the calf muscle pump have not been compared. The purpose of this study was to compare in normal subjects the effects of elastic and inelastic compression on leg intramuscular pressure (IMP), an objective index of calf muscle pump function. IMP in soleus and tibialis anterior muscles was measured with transducer-tipped catheters. Surface compression between each legging and the skin was recorded with an air bladder. Subjects were studied under three conditions: (1) control (no legging), (2) elastic legging, and (3) inelastic legging. Pressure data were recorded for each condition during recumbency, sitting, standing, walking, and running. Elastic leggings applied significantly greater surface compression during recumbency (20 +/- 1 mm Hg, mean +/- SE) than inelastic leggings (13 +/- 2 mm Hg). During recumbency, elastic leggings produced significantly higher soleus IMP of 25 +/- 1 mm Hg and tibialis anterior IMP of 28 +/- 1 mm Hg compared to 17 +/- 1 mm Hg and 20 +/- 2 mm Hg, respectively, generated by inelastic leggings and 8 +/- 1 mm Hg and 11 +/- 1 mm Hg, respectively, without leggings. During sitting, walking, and running, however, peak IMPs generated in the muscular compartments by elastic and inelastic leggings were similar. Our results suggest that elastic leg compression applied over a long period in the recumbent posture may impede microcirculation and jeopardize tissue viability.(ABSTRACT TRUNCATED AT 250 WORDS).

  4. Deep and shallow inelastic scattering

    SciTech Connect

    Ray, Heather

    2015-05-15

    In this session we focused on the higher energy deep and shallow inelastic particle interactions, DIS and SIS. DIS interactions occur when the energy of the incident particle beam is so large that the beam is able to penetrate the nucleons inside of the target nuclei. These interactions occur at the smallest level possible, that of the quark-gluon, or parton, level. SIS interactions occur in an intermediate energy range, just below the energy required for DIS interactions. The DIS cross section formula contains structure functions that describe our understanding of the underlying parton structure of nature. The full description of DIS interactions requires three structure functions: two may be measured in charged lepton or neutrino scattering, but one can only be extracted from neutrino DIS data. There are reasons to expect that the impact of nuclear effects could be different for neutrinos engaging in the DIS interaction, vs those felt by leptons. In fact, fits by the nCTEQ collaboration have found that the neutrino-Fe structure functions appear to differ from those extracted from lepton scattering data [1]. To better understand the global picture of DIS and SIS, we chose a three-pronged attack that examined recent experimental results, data fits, and latest theory predictions. Experimental results from neutrino and lepton scattering, as well as collider experiments, were presented.

  5. Determinants of accepting non-invasive ventilation treatment in motor neurone disease: a quantitative analysis at point of need

    PubMed Central

    Cousins, Rosanna; Ando, Hikari; Thornton, Everard; Chakrabarti, Biswajit; Angus, Robert; Young, Carolyn

    2013-01-01

    Objectives: Motor neurone disease (MND) progressively damages the nervous system causing wasting to muscles, including those used for breathing. There is robust evidence that non-invasive ventilation (NIV) relieves respiratory symptoms and improves quality of life in MND. Nevertheless, about a third of those who would benefit from NIV decline the treatment. The purpose of the study was to understand this phenomenon. Design: A cross-sectional quantitative analysis. Methods: Data including age, sex, MND symptomatology, general physical and mental health and psychological measures were collected from 27 patients and their family caregivers at the point of being offered ventilatory support based on physiological markers. Results: Quantitative analyses indicated no difference in patient characteristics or symptomatology between those who tolerated (n = 17) and those who declined (n = 10) NIV treatment. A comparison of family caregivers found no differences in physical or mental health or in caregiving distress, emphasising that this was high in both groups; however, family caregivers supporting NIV treatment were significantly more resilient, less neurotic and less anxious than family caregivers who did not. Regression analyses, forcing MND symptoms to enter the equation first, found caregiver resilience:commitment the strongest predictor of uptake of NIV treatment adding 22% to the 56% explained variance. Conclusion: Patients who tolerated NIV treatment had family caregivers who cope through finding meaning and purpose in their situation. Psychological support and proactive involvement for family caregivers in the management of the illness situation is indicated if acceptance of NIV treatment is to be maximised in MND. PMID:25264500

  6. Women's Acceptability of Misoprostol Treatment for Incomplete Abortion by Midwives and Physicians - Secondary Outcome Analysis from a Randomized Controlled Equivalence Trial at District Level in Uganda

    PubMed Central

    Cleeve, Amanda; Byamugisha, Josaphat; Gemzell-Danielsson, Kristina; Mbona Tumwesigye, Nazarius; Atuhairwe, Susan; Faxelid, Elisabeth; Klingberg-Allvin, Marie

    2016-01-01

    Objective This study aimed to assess women´s acceptability of diagnosis and treatment of incomplete abortion with misoprostol by midwives, compared with physicians. Methods This was an analysis of secondary outcomes from a multi-centre randomized controlled equivalence trial at district level in Uganda. Women with first trimester incomplete abortion were randomly allocated to clinical assessment and treatment with misoprostol by a physician or a midwife. The randomisation (1:1) was done in blocks of 12 and stratified for health care facility. Acceptability was measured in expectations and satisfaction at a follow up visit 14–28 days following treatment. Analysis of women’s overall acceptability was done using a generalized linear mixed-effects model with an equivalence range of -4% to 4%. The study was not masked. The trial is registered at ClinicalTrials.org, NCT 01844024. Results From April 2013 to June 2014, 1108 women were assessed for eligibility of which 1010 were randomized (506 to midwife and 504 to physician). 953 women were successfully followed up and included in the acceptability analysis. 95% (904) of the participants found the treatment satisfactory and overall acceptability was found to be equivalent between the two study groups. Treatment failure, not feeling calm and safe following treatment, experiencing severe abdominal pain or heavy bleeding following treatment, were significantly associated with non-satisfaction. No serious adverse events were recorded. Conclusions Treatment of incomplete abortion with misoprostol by midwives and physician was highly, and equally, acceptable to women. Trial Registration ClinicalTrials.gov NCT01844024 PMID:26872219

  7. Acceptability of human risk.

    PubMed Central

    Kasperson, R E

    1983-01-01

    This paper has three objectives: to explore the nature of the problem implicit in the term "risk acceptability," to examine the possible contributions of scientific information to risk standard-setting, and to argue that societal response is best guided by considerations of process rather than formal methods of analysis. Most technological risks are not accepted but are imposed. There is also little reason to expect consensus among individuals on their tolerance of risk. Moreover, debates about risk levels are often at base debates over the adequacy of the institutions which manage the risks. Scientific information can contribute three broad types of analyses to risk-setting deliberations: contextual analysis, equity assessment, and public preference analysis. More effective risk-setting decisions will involve attention to the process used, particularly in regard to the requirements of procedural justice and democratic responsibility. PMID:6418541

  8. Inelastic pion scattering by /sup 13/C at low energies

    SciTech Connect

    Mitchell, J.H.

    1987-03-01

    Angular distributions for inelastically scattered pions were obtained for several states in /sup 13/C at an incident energy of 65 MeV. The data include results from both ..pi../sup +/ and ..pi../sup -/ measurements. In addition, ..pi../sup -/ measurements were made at T/sub ..pi../ = 50 MeV at one angle to give a two point fixed-q excitation function. The data are compared to theory and the data of others. As might be expected, medium corrections are shown to be considerably more important at low energies than at resonance. This is true for inelastic transitions of multipolarity 0,2 and 3. Parameters derived from an analysis of elastic pion scattering and SCX data also provide an adequate description of the inelastic transitions. The charge asymmetry in the cross sections for the 9/2/sup +/ state that was seen at resonance persists at these energies. This result is consistent with an impulse approximation treatment of the spin-flip amplitude. This is true even though the incoming energy of the pions is far below the range where the validity of an impulse treatment is expected. 65 refs., 45 figs.

  9. The interpretation of polycrystalline coherent inelastic neutron scattering from aluminium

    PubMed Central

    Roach, Daniel L.; Ross, D. Keith; Gale, Julian D.; Taylor, Jon W.

    2013-01-01

    A new approach to the interpretation and analysis of coherent inelastic neutron scattering from polycrystals (poly-CINS) is presented. This article describes a simulation of the one-phonon coherent inelastic scattering from a lattice model of an arbitrary crystal system. The one-phonon component is characterized by sharp features, determined, for example, by boundaries of the (Q, ω) regions where one-phonon scattering is allowed. These features may be identified with the same features apparent in the measured total coherent inelastic cross section, the other components of which (multiphonon or multiple scattering) show no sharp features. The parameters of the model can then be relaxed to improve the fit between model and experiment. This method is of particular interest where no single crystals are available. To test the approach, the poly-CINS has been measured for polycrystalline aluminium using the MARI spectrometer (ISIS), because both lattice dynamical models and measured dispersion curves are available for this material. The models used include a simple Lennard-Jones model fitted to the elastic constants of this material plus a number of embedded atom method force fields. The agreement obtained suggests that the method demonstrated should be effective in developing models for other materials where single-crystal dispersion curves are not available. PMID:24282332

  10. Inelastic Heat Transfer in Molecular Quantum Dots

    NASA Astrophysics Data System (ADS)

    Dyrkacz, Joanna; Walczak, Kamil

    We examine electronic heat conduction via molecular complexes in the presence of local electron-phonon coupling effects. In off-resonance transport regime, even weak electron-phonon interactions lead to phonon-mediated changes of transport characteristics. In the nearly resonance conditions, the strong electron-phonon coupling reduces the height of the main conductance peak, generating additional satellites (phonon sidebands) in transport characteristics and shifting molecular energy spectrum via reorganization (polaron) energy. In the past, it was shown that inclusion of electron-phonon coupling effects into computational scheme reduces discrepancy between theoretical results and experimental data. The aim of this project is to study electron-phonon coupling effects on electronic heat transfer at molecular level. For that purpose, we use non-perturbative computational scheme based on inelastic version of Landauer formula, where the Green's functions technique combined with polaron transformation was used to calculate multi-channel transmission probability function, while accessibility of individual conduction channels is governed by Boltzmann statistics. Our analysis is based on the hypothesis that the dynamics created by electron-phonon interaction onto the molecular quantum dot asymmetrically connected to two thermal reservoirs will lead to thermal rectification effect. Our results will be discussed in a few aspects: electron-phonon coupling strength, phonon dispersion relationship, and heat fluxes generated by temperature difference as well as bias voltage.

  11. Pion inelastic scattering from sup 20 Ne

    SciTech Connect

    Burlein, M. . Dept. of Physics)

    1989-12-01

    Angular distributions for {sup 20}Ne({pi}{sup {plus minus}}, {pi}{sup {plus minus}}{prime}) were measured on the Energetic Pion Channel and Spectrometer (EPICS) at the Clinton P. Anderson Meson Physics Facility (LAMPF). Data were taken with both {pi}{sup {plus}} and {pi}{sup {minus}} over an angular range of 12{degree} to 90{degree} for T{sub {pi}}=180 MeV and with {pi}{sup +} from 15{degree} to 90{degree} for T{sub {pi}}=120 MeV. The data were analyzed using both the distorted-wave impulse approximation (DWIA) and the coupled-channels impulse approximation (CCIA) with collective transition densities. In addition, microscopic transition densities were used in the DWIA analysis for states in the lowest rotational bands. The transitions to the 6.73-MeV 0{sup +} and several 1{sup {minus}} states, including the states at 5.79 MeV and 8.71 MeV, were studied using several models for the transition density. Strong evidence for the importance of two-step routes in pion inelastic scattering was seen in several angular distributions, including the 5.79-MeV 1{sup {minus}}, the first three 4{sup +} states, and the 8.78-MeV 6{sup +}. 100 refs., 81 figs., 33 tabs.

  12. Using conjoint analysis to measure the acceptability of rectal microbicides among men who have sex with men in four South American cities.

    PubMed

    Kinsler, Janni J; Cunningham, William E; Nureña, César R; Nadjat-Haiem, Carsten; Grinsztejn, Beatriz; Casapia, Martin; Montoya-Herrera, Orlando; Sánchez, Jorge; Galea, Jerome T

    2012-08-01

    Conjoint Analysis (CJA), a statistical market-based technique that assesses the value consumers place on product characteristics, may be used to predict acceptability of hypothetical products. Rectal Microbicides (RM)-substances that would prevent HIV infection during receptive anal intercourse-will require acceptability data from potential users in multiple settings to inform the development process by providing valuable information on desirable product characteristics and issues surrounding potential barriers to product use. This study applied CJA to explore the acceptability of eight different hypothetical RM among 128 MSM in Lima and Iquitos, Peru; Guayaquil, Ecuador; and Rio de Janeiro, Brazil. Overall RM acceptability was highest in Guayaquil and lowest in Rio. Product effectiveness had the greatest impact on acceptability in all four cities, but the impact of other product characteristics varied by city. This study demonstrates that MSM from the same region but from different cities place different values on RM characteristics that could impact uptake of an actual RM. Understanding specific consumer preferences is crucial during RM product development, clinical trials and eventual product dissemination. PMID:21959986

  13. Accepters and Rejecters of Counseling.

    ERIC Educational Resources Information Center

    Rose, Harriett A.; Elton, Charles F.

    Personality differences between students who accept or reject proffered counseling assistance were investigated by comparing personality traits of 116 male students at the University of Kentucky who accepted or rejected letters of invitation to group counseling. Factor analysis of Omnibus Personality Inventory (OPI) scores to two groups of 60 and…

  14. Measurement of proton-proton inelastic scattering cross-section at \\chem{\\sqrt {s} = 7\\,{ {TeV}}}

    NASA Astrophysics Data System (ADS)

    The TOTEM Collaboration; Antchev, G.; Aspell, P.; Atanassov, I.; Avati, V.; Baechler, J.; Berardi, V.; Berretti, M.; Bossini, E.; Bozzo, M.; Brogi, P.; Brücken, E.; Buzzo, A.; Cafagna, F. S.; Calicchio, M.; Catanesi, M. G.; Covault, C.; Csanád, M.; Csörgő, T.; Deile, M.; Doubek, M.; Eggert, K.; Eremin, V.; Ferretti, R.; Ferro, F.; Fiergolski, A.; Garcia, F.; Giani, S.; Greco, V.; Grzanka, L.; Heino, J.; Hilden, T.; Intonti, R. A.; Kašpar, J.; Kopal, J.; Kundrát, V.; Kurvinen, K.; Lami, S.; Latino, G.; Lauhakangas, R.; Leszko, T.; Lippmaa, E.; Lokajíček, M.; Lo Vetere, M.; Rodríguez, F. Lucas; Macrí, M.; Mäki, T.; Mercadante, A.; Minafra, N.; Minutoli, S.; Nemes, F.; Niewiadomski, H.; Oliveri, E.; Oljemark, F.; Orava, R.; Oriunno, M.; Österberg, K.; Palazzi, P.; Procházka, J.; Quinto, M.; Radermacher, E.; Radicioni, E.; Ravotti, F.; Robutti, E.; Ropelewski, L.; Ruggiero, G.; Saarikko, H.; Santroni, A.; Scribano, A.; Smajek, J.; Snoeys, W.; Sziklai, J.; Taylor, C.; Turini, N.; Vacek, V.; Vítek, M.; Welti, J.; Whitmore, J.; Wyszkowski, P.

    2013-01-01

    The TOTEM experiment at the LHC has measured the inelastic proton-proton cross-section at \\sqrt {s}= 7\\,{ { TeV}} in a β* = 90 m run with low inelastic pile-up. The measurement was based on events with at least one charged particle in the T2 telescope acceptance of 5.3 < |η| < 6.5 in pseudorapidity. Combined with data from the T1 telescope, covering 3.1 < |η| < 4.7, the cross-section for inelastic events with at least one |η| ⩽ 6.5 final-state particle was determined to be (70.5 ± 2.9) mb. This cross-section includes all central diffractive events of which maximally 0.25 mb is estimated to escape the detection of the telescopes. Based on models for low mass diffraction, the total inelastic cross-section was deduced to be (73.7 ± 3.4) mb. An upper limit of 6.31 mb at 95% confidence level on the cross-section for events with diffractive masses below 3.4 GeV was obtained from the difference between the overall inelastic cross-section obtained by TOTEM using elastic scattering and the cross-section for inelastic events with at least one |η| ⩽ 6.5 final-state particle.

  15. Music videos, pro wrestling, and acceptance of date rape among middle school males and females: an exploratory analysis.

    PubMed

    Kaestle, Christine Elizabeth; Halpern, Carolyn Tucker; Brown, Jane D

    2007-02-01

    Exposure to televised music videos and pro wrestling were associated with rape acceptance (lower levels of agreeing with the statement "forcing a partner to have sex is never OK") among males, but not females, in a sample of 904 middle school students (controlling for overall television exposure, parenting style, and demographics). PMID:17259064

  16. Being Mindful about the Assessment of Culture: A Cultural Analysis of Culturally Adapted Acceptance-Based Behavior Therapy Approaches

    ERIC Educational Resources Information Center

    La Roche, Martin; Lustig, Kara

    2013-01-01

    In this article we review a wide range of cultural adaptations of acceptance-based behavior therapies (ABBT) from a cultural perspective. Consistent with the cultural match model, we argue that psychotherapeutic cultural adaptations are more effective as the cultural characteristics of patients are matched to the cultural characteristics of the…

  17. The Role of Electronic Preprints in Chemical Communication: Analysis of Citation, Usage, and Acceptance in the Journal Literature.

    ERIC Educational Resources Information Center

    Brown, Cecelia

    2003-01-01

    Characterizes the use and acceptance of electronic preprints in chemistry literature based on a survey of authors of preprints appearing in the Chemistry Preprint Server (CPS). Shows that preprints are convenient for disseminating research findings and for receiving feedback before submitting to a peer-review journal, but that reception of…

  18. Approaches to acceptable risk

    SciTech Connect

    Whipple, C.

    1997-04-30

    Several alternative approaches to address the question {open_quotes}How safe is safe enough?{close_quotes} are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made.

  19. Multiple Scattering Theory for Inelastic Processes

    NASA Astrophysics Data System (ADS)

    Braun, V. M.; Shabelski, Yu. M.

    The review is devoted to the description of inelastic interactions of composite systems in the framework of the multiple scattering approach. Quasielastic scattering and multiple hadron production processes are considered for hadron-hadron, hadron-nucleus, and nucleus-nucleus collisions at high energies. We show that important information on inelastic processes follows on very general grounds from the classification of various intermediate states in the elastic amplitude, as similarly AGK cutting rules arise for reggeon diagrams. Attention is mainly given to the appropriate technique, which is illustrated with several examples of increasing complexity. The general formalism for the inelastic screening corrections is presented and its particular applications to various reactions. The review does not aim at the systematic study of numerous versions of the multiple scattering calculus confronting each other and to the extensive experimental data. Instead, we concentrate on a few simple examples to make clear the underlying physics and to work out the needed machinery employed in practical calculations.

  20. The Cosmology of Composite Inelastic Dark Matter

    SciTech Connect

    Spier Moreira Alves, Daniele; Behbahani, Siavosh R.; Schuster, Philip; Wacker, Jay G.; /SLAC

    2011-08-19

    Composite dark matter is a natural setting for implementing inelastic dark matter - the O(100 keV) mass splitting arises from spin-spin interactions of constituent fermions. In models where the constituents are charged under an axial U(1) gauge symmetry that also couples to the Standard Model quarks, dark matter scatters inelastically off Standard Model nuclei and can explain the DAMA/LIBRA annual modulation signal. This article describes the early Universe cosmology of a minimal implementation of a composite inelastic dark matter model where the dark matter is a meson composed of a light and a heavy quark. The synthesis of the constituent quarks into dark hadrons results in several qualitatively different configurations of the resulting dark matter composition depending on the relative mass scales in the system.

  1. Inelastic Neutron Scattering from Glass Formers

    NASA Astrophysics Data System (ADS)

    Buchenau, U.

    Neutron spectra below and above the glass transition temperature show a pronounced difference between strong and fragile glass formers in Angell's fragility scheme. The strong anharmonic increase of the inelastic scattering with increasing temperature in fragile substances is absent in the strongest glass former SiO2. That difference is reflected in the temperature dependence of Brillouin sound velocities above the glass transition. Coherent inelastic neutron scattering data indicate a mixture of sound waves and local modes at the low frequency boson peak. A relation between the fragility and the temperature dependence of the transverse hypersound velocity at the glass temperature is derived.

  2. Mobilizing Homeless Youth for HIV Prevention: A Social Network Analysis of the Acceptability of a Face-to-Face and Online Social Networking Intervention

    ERIC Educational Resources Information Center

    Rice, Eric; Tulbert, Eve; Cederbaum, Julie; Adhikari, Anamika Barman; Milburn, Norweeta G.

    2012-01-01

    The objective of the study is to use social network analysis to examine the acceptability of a youth-led, hybrid face-to-face and online social networking HIV prevention program for homeless youth. Seven peer leaders (PLs) engaged face-to-face homeless youth (F2F) in the creation of digital media projects (e.g. You Tube videos). PL and F2F…

  3. Acceptance and Efficacy of Metacognitive Training (MCT) on Positive Symptoms and Delusions in Patients With Schizophrenia: A Meta-analysis Taking Into Account Important Moderators.

    PubMed

    Eichner, Carolin; Berna, Fabrice

    2016-07-01

    Metacognitive training (MCT) is a new, widely used intervention for psychosis. The present meta-analysis examines the efficacy of MCT in schizophrenia. Fifteen studies comparing effects of MCT on positive symptoms, delusions or acceptance of MCT with a control group were included in this meta-analysis. These studies comprised a total of 408 patients in the MCT condition and 399 in the control condition. The moderating effects of masking of outcome assessment, randomization, incomplete outcome data, use of an active control intervention, and individual vs group MCT were investigated. Possible effects of sensitivity analyses and publication bias were also examined. The results show a significant overall effect of MCT for positive symptoms (g = -0.34, 95% CI [-0.53, -0.15]), delusions (g = -0.41, 95% CI [-0.74, -0.07]) and acceptance of the intervention (g = -0.84, 95% CI [-1.37, -0.31]). Using only studies being at low risk for bias regarding randomization, masking and incomplete outcome data reduced effect sizes for positive symptoms and delusions (g = -0.28, 95% CI [-0.50, -0.06] and g = -0.18, 95% CI [-0.43, 0.06]), respectively. This meta-analysis demonstrates that MCT exerts a small to moderate effect on delusions and positive symptoms and a large effect on acceptance of the intervention. The effect on delusions is reduced, but remains significant when potential biases are considered. PMID:26748396

  4. First Search for the EMC Effect and Nuclear Shadowing in Neutrino Nucleus Deep Inelastic Scattering at MINERvA

    SciTech Connect

    Mousseau, Joel A.

    2015-01-01

    Decades of research in electron-nucleus deep inelastic scattering (DIS) have provided a clear picture of nuclear physics at high momentum transfer. While these effects have been clearly demonstrated by experiment, the theoretical explanation of their origin in some kinematic regions has been lacking. Particularly, the effects in the intermediate regions of Bjorken-x, anti-shadowing and the EMC effect have no universally accepted quantum mechanical explanation. In addition, these effects have not been measured systematically with neutrino-nucleus deep inelastic scattering, due to experiments lacking multiple heavy targets.

  5. CT14QED parton distribution functions from isolated photon production in deep inelastic scattering

    NASA Astrophysics Data System (ADS)

    Schmidt, Carl; Pumplin, Jon; Stump, Daniel; Yuan, C.-P.

    2016-06-01

    We describe the implementation of quantum electrodynamic (QED) evolution at leading order (LO) along with quantum chromodynamic (QCD) evolution at next-to-leading order (NLO) in the CTEQ-TEA global analysis package. The inelastic contribution to the photon parton distribution function (PDF) is described by a two-parameter ansatz, coming from radiation off the valence quarks, and based on the CT14 NLO PDFs. Setting the two parameters to be equal allows us to completely specify the inelastic photon PDF in terms of the inelastic momentum fraction carried by the photon, p0γ, at the initial scale Q0=1.295 GeV . We obtain constraints on the photon PDF by comparing with ZEUS data [S. Chekanov et al. (ZEUS Collaboration), Phys. Lett. B 687, 16 (2010)] on the production of isolated photons in deep inelastic scattering, e p →e γ +X . For this comparison we present a new perturbative calculation of the process that consistently combines the photon-initiated contribution with the quark-initiated contribution. Comparison with the data allows us to put a constraint at the 90% confidence level of p0γ≲0.14 % for the inelastic photon PDF at the initial scale of Q0=1.295 GeV in the one-parameter radiative ansatz. The resulting inelastic CT14QED PDFs will be made available to the public. In addition, we also provide CT14QEDinc PDFs, in which the inclusive photon PDF at the scale Q0 is defined by the sum of the inelastic photon PDF and the elastic photon distribution obtained from the equivalent photon approximation.

  6. Inelastic compaction of a quartz-rich limestone (Invited)

    NASA Astrophysics Data System (ADS)

    Baud, P.; Schubnel, A.; rolland, A.; Heap, M. J.

    2013-12-01

    The analysis of deformation and failure in many sedimentary settings hinges upon a fundamental understanding of inelastic behavior and failure mode of porous carbonate rocks. Previous studies on porous carbonate focused primarily on relatively pure limestone (composed in majority of calcite). Inelastic compaction in these carbonates was reported to be associated to cataclastic pore collapse and in most cases homogeneous cataclastic flow. Recent experimental results however revealed the development of compaction localization in the more porous end-members. The analysis of strain localization and complex failure modes in limestone has proved to be significantly more challenging than in sandstone because acoustic emissions (AE) cannot usually be used to guide systematic microstructural analysis. Recent studies have therefore relied on X-ray Computed Tomography, a technique that can to date only be used in situ in relatively limited systems. In this study we investigated the development of inelastic damage in a quartz-rich limestone with two main objectives: (1) quantify the impact of a secondary mineral such as quartz on the strength and strain localization in porous carbonate, (2) try to follow the development of inelastic damage using AE in such a quartz-rich rock. Saint-Maximin limestone of 37% porosity and composed of 80% calcite and 20% quartz was selected for this study. Two series of conventional triaxial experiments were performed in parallel at room temperature, constant strain rate in both nominally dry and wet conditions at confining pressures between 3 and 50 MPa. Wet experiments were carried out with water in drained conditions at 10 MPa of pore pressure. The first series of experiments were performed at IPG Strasbourg on relatively small samples. The failure modes and spatial distribution of damage were studied systematically in these samples. The second series of experiments were performed on larger samples at ENS Paris. Acoustic emission activity was

  7. Deep inelastic scattering near the Coulomb barrier

    SciTech Connect

    Gehring, J.; Back, B.; Chan, K.

    1995-08-01

    Deep inelastic scattering was recently observed in heavy ion reactions at incident energies near and below the Coulomb barrier. Traditional models of this process are based on frictional forces and are designed to predict the features of deep inelastic processes at energies above the barrier. They cannot be applied at energies below the barrier where the nuclear overlap is small and friction is negligible. The presence of deep inelastic scattering at these energies requires a different explanation. The first observation of deep inelastic scattering near the barrier was in the systems {sup 124,112}Sn + {sup 58,64}Ni by Wolfs et al. We previously extended these measurements to the system {sup 136}Xe + {sup 64}Ni and currently measured the system {sup 124}Xe + {sup 58}Ni. We obtained better statistics, better mass and energy resolution, and more complete angular coverage in the Xe + Ni measurements. The cross sections and angular distributions are similar in all of the Sn + Ni and Xe + Ni systems. The data are currently being analyzed and compared with new theoretical calculations. They will be part of the thesis of J. Gehring.

  8. Parity violation in deep inelastic scattering

    SciTech Connect

    Souder, P.

    1994-04-01

    AA beam of polarized electrons at CEBAF with an energy of 8 GeV or more will be useful for performing precision measurements of parity violation in deep inelastic scattering. Possible applications include precision tests of the Standard Model, model-independent measurements of parton distribution functions, and studies of quark correlations.

  9. Mechanical Energy Changes in Perfectly Inelastic Collisions

    ERIC Educational Resources Information Center

    Mungan, Carl E.

    2013-01-01

    Suppose a block of mass "m"[subscript 1] traveling at speed "v"[subscript 1] makes a one-dimensional perfectly inelastic collision with another block of mass "m"[subscript 2]. What else does one need to know to calculate the fraction of the mechanical energy that is dissipated in the collision? (Contains 1 figure.)

  10. The dynamic inelastic response of delaminated plates

    SciTech Connect

    Addessio, F.L.; Williams, T.O.

    1996-12-01

    A generalized theory for laminated plates with delaminations is used to consider the influence of inelastic deformations on the dynamic behavior of composite plates with delaminations. The laminate model is based on a generalized displacement formulation implemented at the layer level. The delamination behavior can be modeled using any general interfacial fracture law: however, for the current work a linear model is employed. The interfacial displacement jumps are expressed in an internally consistent fashion in terms of the fundamental unknown interfacial tractions. The current theory imposes no restrictions on the size, location, distribution, or direction of growth of the delaminations. The proposed theory is used to consider the inelastic, dynamic response of delaminated plates in cylindrical bending subjected to a ramp and hold type of loading. The individual layers in the current study are assumed to be either titanium or aluminum. The inelastic response of both materials is modeled using the unified viscoplastic theory of Bodner and Partom. It is shown that the presence of both inelastic behavior and delamination can have a significant influence on the plate response. In particular it is shown that these mechanisms are strongly interactive. This result emphasizes the need to consider both mechanisms simultaneously.

  11. Neutron inelastic scattering by amino acids

    SciTech Connect

    Thaper, C.L.; Sinha, S.K.; Dasannacharya, B.A.

    1982-01-01

    Inelastic neutron scattering experiments on normal, N-deuterated glycine, normal and N-deuterated alanine, L-valine, L-tyrosine and, L-phenylalanine at 100 K, are reported. Coupling of the external modes to different hydrogens is discussed.

  12. Use of cluster analysis and preference mapping to evaluate consumer acceptability of choice and select bovine M. longissimus lumborum steaks cooked to various end-point temperatures.

    PubMed

    Schmidt, T B; Schilling, M W; Behrends, J M; Battula, V; Jackson, V; Sekhon, R K; Lawrence, T E

    2010-01-01

    Consumer research was conducted to evaluate the acceptability of choice and select steaks from the Longissimus lumborum that were cooked to varying degrees of doneness using demographic information, cluster analysis and descriptive analysis. On average, using data from approximately 155 panelists, no differences (P>0.05) existed in consumer acceptability among select and choice steaks, and all treatment means ranged between like slightly and like moderately (6-7) on the hedonic scale. Individual consumers were highly variable in their perception of acceptability and consumers were grouped into clusters (eight for select and seven for choice) based on their preference and liking of steaks. The largest consumer groups liked steaks from all treatments, but other groups preferred (P<0.05) steaks that were cooked to various end-point temperatures. Results revealed that consumers could be grouped together according to preference, liking and descriptive sensory attributes, (juiciness, tenderness, bloody, metallic, and roasted) to further understand consumer perception of steaks that were cooked to different end-point temperatures. PMID:20374753

  13. Baby-Crying Acceptance

    NASA Astrophysics Data System (ADS)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  14. Efficiency comparison of an augmented finite element formulation with standard return mapping algorithms for elastic-inelastic materials

    NASA Astrophysics Data System (ADS)

    Rempler, H.-U.; Wieners, C.; Ehlers, W.

    2011-11-01

    The numerical simulation of elastic-inelastic material behaviour is reviewed and an alternative method, i. e., an augmented Finite Element (FE) formulation is presented. For the augmented FE formulation, the history variables, which provide the information of inelastic deformations from previous time-steps, are represented as FE functions. The discretisation of the augmented system results in additional degrees of freedom (DOF). As a result, generally accepted standard formulations for evaluating inelastic deformations in a numeric sub-step can now be replaced by a fully coupled Newton method. Then, it is not required to solve additional local systems. Both numerical methods are exemplarily applied to a viscoplastic Perzyna-type regularisation of softening material behaviour within a geometrically linear approach in order to simulate the development of shear bands occurring in a tensile bar. Numerical studies prove comparative results, while exhibiting a computational speed-up for the augmented FE formulation.

  15. Inelastic response of metal matrix composites under biaxial loading

    NASA Technical Reports Server (NTRS)

    Mirzadeh, F.; Pindera, Marek-Jerzy; Herakovich, Carl T.

    1990-01-01

    Elements of the analytical/experimental program to characterize the response of silicon carbide titanium (SCS-6/Ti-15-3) composite tubes under biaxial loading are outlined. The analytical program comprises prediction of initial yielding and subsequent inelastic response of unidirectional and angle-ply silicon carbide titanium tubes using a combined micromechanics approach and laminate analysis. The micromechanics approach is based on the method of cells model and has the capability of generating the effective thermomechanical response of metal matrix composites in the linear and inelastic region in the presence of temperature and time-dependent properties of the individual constituents and imperfect bonding on the initial yield surfaces and inelastic response of (0) and (+ or - 45)sub s SCS-6/Ti-15-3 laminates loaded by different combinations of stresses. The generated analytical predictions will be compared with the experimental results. The experimental program comprises generation of initial yield surfaces, subsequent stress-strain curves and determination of failure loads of the SCS-6/Ti-15-3 tubes under selected loading conditions. The results of the analytical investigation are employed to define the actual loading paths for the experimental program. A brief overview of the experimental methodology is given. This includes the test capabilities of the Composite Mechanics Laboratory at the University of Virginia, the SCS-6/Ti-15-3 composite tubes secured from McDonnell Douglas Corporation, a text fixture specifically developed for combined axial-torsional loading, and the MTS combined axial-torsion loader that will be employed in the actual testing.

  16. Development of an integrative cessation program for co-smokers of cigarettes and cannabis: demand analysis, program description, and acceptability

    PubMed Central

    2013-01-01

    Background Tobacco and cannabis use are strongly interrelated, but current national and international cessation programs typically focus on one substance, and address the other substance either only marginally or not at all. This study aimed to identify the demand for, and describe the development and content of, the first integrative group cessation program for co-smokers of cigarettes and cannabis. Methods First, a preliminary study using expert interviews, user focus groups with (ex-)smokers, and an online survey was conducted to investigate the demand for, and potential content of, an integrative smoking cessation program (ISCP) for tobacco and cannabis co-smokers. This study revealed that both experts and co-smokers considered an ISCP to be useful but expected only modest levels of readiness for participation. Based on the findings of the preliminary study, an interdisciplinary expert team developed a course concept and a recruitment strategy. The developed group cessation program is based on current treatment techniques (such as motivational interviewing, cognitive behavioural therapy, and self-control training) and structured into six course sessions. The program was evaluated regarding its acceptability among participants and course instructors. Results Both the participants and course instructors evaluated the course positively. Participants and instructors especially appreciated the group discussions and the modules that were aimed at developing personal strategies that could be applied during simultaneous cessation of tobacco and cannabis, such as dealing with craving, withdrawal, and high-risk situations. Conclusions There is a clear demand for a double cessation program for co-users of cigarettes and cannabis, and the first group cessation program tailored for these users has been developed and evaluated for acceptability. In the near future, the feasibility of the program will be evaluated. Trial registration Current Controlled Trials ISRCTN15248397

  17. Mapping the intramolecular contributions to the inelastic electron tunneling signal of a molecular junction

    NASA Astrophysics Data System (ADS)

    Foti, Giuseppe; Vázquez, Héctor

    2016-07-01

    We present a quantitative analysis of the intramolecular origin of the inelastic electron tunneling signal of a molecular junction. We use density-functional theory to study a representative conjugated molecule with a low degree of symmetry and calculate, for all modes, the different contributions that give rise to the vibrational spectrum. These local contributions involve products of scattering states with electron-phonon matrix elements and thus encode information on both the vibrational modes and the electronic structure. We separate these intra- and interatomic terms and draw a pattern of addition or cancellation of these partial contributions throughout the inelastic spectrum. This allows for a quantitative relation between the degree of symmetry of each vibrational mode, its inelastic signal, and the locality of selection rules.

  18. Exponential trend to equilibrium for the inelastic Boltzmann equation driven by a particle bath

    NASA Astrophysics Data System (ADS)

    Cañizo, José A.; Lods, Bertrand

    2016-05-01

    We consider the spatially homogeneous Boltzmann equation for inelastic hard spheres (with constant restitution coefficient α \\in (0,1) ) under the thermalization induced by a host medium with a fixed Maxwellian distribution. We prove that the solution to the associated initial-value problem converges exponentially fast towards the unique equilibrium solution. The proof combines a careful spectral analysis of the linearised semigroup as well as entropy estimates. The trend towards equilibrium holds in the weakly inelastic regime in which α is close to 1, and the rate of convergence is explicit and depends solely on the spectral gap of the elastic linear collision operator.

  19. Shock wave compression and release of hexagonal-close-packed metal single crystals: Inelastic deformation of c-axis magnesium

    NASA Astrophysics Data System (ADS)

    Winey, J. M.; Renganathan, P.; Gupta, Y. M.

    2015-03-01

    To understand inelastic deformation mechanisms for shocked hexagonal-close-packed (hcp) metals, shock compression and release wave profiles, previously unavailable for hcp single crystals, were measured for c-axis magnesium crystals. The results show that the elastic-inelastic loading response is strongly time-dependent. Measured release wave profiles showed distinct peaked features, which are unusual for inelastic deformation during unloading of shocked metals. Numerical simulations show that pyramidal slip provides a reasonably good description of the inelastic loading response. However, { 10 1 ¯ 2 } twinning is needed to explain the unloading response. The results and analysis presented here provide insight into the relative roles of dislocation slip and deformation twinning in the response of shocked hcp metals.

  20. Elastic-plastic strain acceptance criterion for structures subject to rapidly applied transient dynamic loading

    SciTech Connect

    Solonick, W.

    1996-11-01

    Rapidly applied transient dynamic loads produce stresses and deflections in structures that typically exceed those from static loading conditions. Previous acceptance criteria for structures designed for rapidly applied transient dynamic loading limited stresses to those determined from elastic analysis. Different stress limits were established for different grades of structure depending upon the amount of permanent set considered acceptable. Structure allowed to sustain very limited permanent set is designed to stress limits not significantly greater than yield stress. Greater permanent set in structure under rapidly applied transient dynamic loading conditions is permitted by establishing stress limits that are significantly greater than yield stress but still provide adequate safety margin (with respect to failure). This paper presents a strain-based elastic-plastic (i.e., inelastic) analysis criterion developed as an alternative to the more conservative stress-based elastic analysis stress criterion for structures subjected to rapidly applied transient dynamic loading. The strain limits established are based on a fraction of the strain at ultimate stress obtained from an engineering stress/strain curve of the material. Strains limits are categorized by type as membrane or surface and by region as general, local, or concentrated. The application of the elastic-plastic criterion provides a more accurate, less conservative design/analysis basis for structures than that used in elastic stress-based analysis criteria, while still providing adequate safety margins.

  1. Elastic-Plastic Strain Acceptance Criteria for Structures Subject to Rapidly Applied Transient Dynamic Loading

    SciTech Connect

    W.R. Solonick

    2003-04-01

    Rapidly applied transient dynamic loads produce stresses and deflections in structures that typically exceed those from static loading conditions. Previous acceptance criteria for structures designed for rapidly applied transient dynamic loading limited stresses to those determined from elastic analysis. Different stress limits were established for different grades of structure depending upon the amount of permanent set considered acceptable. Structure allowed to sustain very limited permanent set is designed to stress limits not significantly greater than yield stress. Greater permanent set in structure under rapidly applied transient dynamic loading conditions is permitted by establishing stress limits that are significantly greater than yield stress but still provide adequate safety margin (with respect to failure). This paper presents a strain-based elastic-plastic (i.e., inelastic) analysis criterion developed as an alternative to the more conservative stress-based elastic analysis stress criterion for structures subjected to rapidly applied transient dynamic loading. The strain limits established are based on material ductility considerations only and are set as a fraction of the strain at ultimate stress obtained from an engineering stress/strain curve of the material. Strains limits are categorized by type as membrane or surface and by region as general, local , or concentrated. The application of the elastic-plastic criterion provides a more accurate, less conservative design/analysis basis for structures than that used in elastic stress-based analysis criteria, while still providing adequate safety margins.

  2. Comparative efficacy and acceptability of psychotherapies for acute anxiety disorders in children and adolescents: study protocol for a network meta-analysis

    PubMed Central

    Zhang, Yuqing; Zhou, Xinyu; James, Anthony C; Qin, Bin; Whittington, Craig J; Cuijpers, Pim; Del Giovane, Cinzia; Liu, Yiyun; Cohen, David; Weisz, John R; Xie, Peng

    2015-01-01

    Introduction Anxiety disorders are associated with significant public health burden in young individuals. Cognitive-behavioural therapy (CBT) is the most commonly used psychotherapy for anxiety disorders in children and adolescents, but previous reviews were hindered by a limited number of trials with direct comparisons between different psychotherapies and their deliveries. Consequently, the main aim of this research was to investigate the comparative efficacy and acceptability of various types and deliveries of psychotherapies for anxiety disorders in children and adolescents. Methods and analysis We will systematically search PubMed, EMBASE, Cochrane, Web of Science, PsycINFO, CINAHL, ProQuest Dissertations and LiLACS for randomised controlled trials, regardless of whether participants received blinding or not, published from 1 January 1966 to 30 January 2015 (updated to 1 July 2015), that compared any psychotherapy with either a control condition or an active comparator with different types and/or different delivery formats for the acute treatment of anxiety disorders in children and adolescents. Data extraction, risk of bias and quality assessments will be independently extracted by two reviewers. The primary outcome for efficacy will be mean overall change scores in anxiety symptoms (self-rated or assessor-rated) from baseline to post-treatment between two groups. The acceptability of treatment will be measured as the proportion of patients who discontinued treatment during the acute phase of treatment. We will assess efficacy, based on the standardised mean difference (SMD), and acceptability, based on the OR, using a random-effects network meta-analysis within a Bayesian framework. Subgroup and sensitivity analyses will be conducted to assess the robustness of the findings. Ethics and dissemination No ethical issues are foreseen. The results will be published in a peer-reviewed journal and will be disseminated electronically and in print. The meta-analysis

  3. Comparative efficacy, acceptability, and tolerability of lisdexamfetamine in child and adolescent ADHD: a meta-analysis of randomized, controlled trials

    PubMed Central

    Maneeton, Benchalak; Maneeton, Narong; Likhitsathian, Surinporn; Suttajit, Sirijit; Narkpongphun, Assawin; Srisurapanont, Manit; Woottiluk, Pakapan

    2015-01-01

    Background Several studies have shown that lisdexamfetamine (LDX) is efficacious in children and adolescents with attention-deficit/hyperactivity disorder (ADHD). Objectives Aims of this study were to systematically review the efficacy, acceptability, and tolerability of LDX in child and adolescent ADHD. Any randomized controlled trials (RCTs) of LDX versus placebo carried out in children and adolescents with ADHD were included. Data sources The searches of the SCOPUS, MEDLINE, CINAHL and Cochrane Controlled Trials Register were performed in September 2014. Additional searches in the ClinicalTrials. gov and EU Clinical Trials Register database were conducted. Study eligibility criteria, participants, and interventions This review included all RCTs of LDX versus placebo which were carried out in children and adolescents up to 18 years old. Additionally, the included studies must have reported the final outcomes of: i) severity of ADHD symptoms with standardized scales, ii) rates of improvement, iii) rates of discontinuation. To be more thorough, the languages of such RCTs were not limited. Study appraisal and synthesis methods The abstracts from databases were inspected and the full text versions of relevant trials were examined and extracted for important outcomes. The efficacious measurements included either the pooled mean end-point or changed scores of ADHD rating scales, and the rate of improvement. Acceptability and tolerability were measured by the pooled overall discontinuation rate and the pooled discontinuation rate due to adverse events, respectively. A random effect model technique was utilized to synthesize the mean differences (either standardized mean differences or weighted mean differences) and relative risks (RRs) with 95% confidence intervals (CIs). Results A total of 1,016 children and adolescents with ADHD were included. The dosage of LDX was 30 to 70 mg/day. The pooled mean change scores of LDX-treated group was significantly greater than that

  4. ACCEPT: a three-dimensional finite element program for large deformation elastic-plastic-creep analysis of pressurized tubes (LWBR/AWBA Development Program)

    SciTech Connect

    Hutula, D.N.; Wiancko, B.E.

    1980-03-01

    ACCEPT is a three-dimensional finite element computer program for analysis of large-deformation elastic-plastic-creep response of Zircaloy tubes subjected to temperature, surface pressures, and axial force. A twenty-mode, tri-quadratic, isoparametric element is used along with a Zircaloy materials model. A linear time-incremental procedure with residual force correction is used to solve for the time-dependent response. The program features an algorithm which automatically chooses the time step sizes to control the accuracy and numerical stability of the solution. A contact-separation capability allows modeling of interaction of reactor fuel rod cladding with fuel pellets or external supports.

  5. Advanced in-situ measurement of soil carbon content using inelastic neutron scattering

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Measurement and mapping of natural and anthropogenic variations in soil carbon stores is a critical component of any soil resource evaluation process. Emerging modalities for soil carbon analysis in the field is the registration of gamma rays from soil under neutron irradiation. The inelastic neutro...

  6. Constitutive modeling of inelastic anisotropic material response

    NASA Technical Reports Server (NTRS)

    Stouffer, D. C.

    1984-01-01

    A constitutive equation was developed to predict the inelastic thermomechanical response of single crystal turbine blades. These equations are essential for developing accurate finite element models of hot section components and contribute significantly to the understanding and prediction of crack initiation and propagation. The method used was limited to unified state variable constitutive equations. Two approaches to developing an anisotropic constitutive equation were reviewed. One approach was to apply the Stouffer-Bodner representation for deformation induced anisotropy to materials with an initial anisotropy such as single crystals. The second approach was to determine the global inelastic strain rate from the contribution of the slip in each of the possible crystallographic slip systems. A three dimensional finite element is being developed with a variable constitutive equation link that can be used for constitutive equation development and to predict the response of an experiment using the actual specimen geometry and loading conditions.

  7. Deep Inelastic Scattering at the Amplitude Level

    SciTech Connect

    Brodsky, Stanley J.; /SLAC

    2005-08-04

    The deep inelastic lepton scattering and deeply virtual Compton scattering cross sections can be interpreted in terms of the fundamental wavefunctions defined by the light-front Fock expansion, thus allowing tests of QCD at the amplitude level. The AdS/CFT correspondence between gauge theory and string theory provides remarkable new insights into QCD, including a model for hadronic wavefunctions which display conformal scaling at short distances and color confinement at large distances.

  8. Coulomb Distortion in the Inelastic Regime

    SciTech Connect

    Patricia Solvignon, Dave Gaskell, John Arrington

    2009-09-01

    The Coulomb distortion effects have been for a long time neglected in deep inelastic scattering for the good reason that the incident energies were very high. But for energies in the range of earlier data from SLAC or at JLab, the Coulomb distortion could have the potential consequence of affecting the A-dependence of the EMC effect and of the longitudinal to transverse virtual photon absorption cross section ratio $R(x,Q^2)$.

  9. Crash Videos Spark Inelastic Collisions Interest

    NASA Astrophysics Data System (ADS)

    Bart, George R.

    2006-12-01

    There are many popular dramatic crash videos available on the Internet. Introductory physics student interest about the details of inelastic collisions can be significantly aroused by the use of these videos. Sources of the videos will be provided and some of truck crashes will be shown. One dramatic one will be analyzed. It involves MJ of kinetic energy and MN of force. More detail with references is found at http://faculty.ccc.edu/gbart/crashvideo/.

  10. Elastic and Inelastic Scattering of Neutrons using a CLYC array

    NASA Astrophysics Data System (ADS)

    Brown, Tristan; Doucet, E.; Chowdhury, P.; Lister, C. J.; Wilson, G. L.; Devlin, M.; Mosby, S.

    2015-10-01

    CLYC scintillators, which have dual neutron and gamma response, have recently ushered in the possibility of fast neutron spectroscopy without time-of-flight (TOF). A 16-element array of 1'' x 1'' 6Li-depleted CLYC crystals, where pulse-shape-discrimination is achieved via digital pulse processing, has been commissioned at UMass Lowell. In an experiment at LANSCE, high energy neutrons were used to bombard 56Fe and 238U targets, in order to measure elastic and inelastic neutron scattering cross sections as a function of energy and angle with the array. The array is placed very close to the targets for enhanced geometrical solid angles for scattered neutrons compared to standard neutron-TOF measurements. A pulse-height spectrum of scattered neutrons in the detectors is compared to the energy of the incident neutrons, which is measured via the TOF of the pulsed neutrons from the source to the detectors. Recoil corrections are necessary to combine the energy spectra from all the detectors to obtain angle-integrated elastic and inelastic cross-sections. The detection techniques, analysis procedures and results will be presented. Supported by NNSA-SSAA program through DOE Grant DE-NA00013008.

  11. Dynamical regimes on the Cl + H2 collisions: Inelastic rainbow scattering

    NASA Astrophysics Data System (ADS)

    González-Sánchez, L.; Aldegunde, J.; Jambrina, P. G.; Aoiz, F. J.

    2011-08-01

    While Cl + H2 reactive collisions have been a subject of numerous experimental and theoretical studies, inelastic collisions leading to rotational energy transfer and/or vibrational excitation have been largely ignored. In this work, extensive quantum mechanical calculations covering the 0.5-1.5 eV total energy range and various initial rovibrational states have been carried out and used to perform a joint study of inelastic and reactive Cl + H2 collisions. Quasiclassical trajectories calculations complement the quantum mechanical results. The analysis of the inelastic transition probabilities has revealed the existence of two distinct dynamical regimes that correlate with low and high impact parameters, b, and are neatly separated by glory scattering. It has been found that while high-b collisions are mainly responsible for |Δj| = 2 transitions which dominate the inelastic scattering, they are very inefficient in promoting higher |Δj| transitions. The effectiveness of this type of collision also drops with rotational excitation of H2. In contrast, reactive scattering, that competes with |Δ j| > 2 inelastic transitions, is exclusively caused by low-b collisions, and it is greatly favored when the reactants get rotationally excited. Previous studies focusing on the reactivity of the Cl + H2 system established that the van der Waals well located in the entrance channel play a key role in determining the mechanism of the collisions. Our results prove this to be also a case for inelastic processes, where the origin of the double dynamical regime can be traced back to the influence exerted by this well that shapes the topology of the entrance channel of the Cl-H2 system.

  12. Mobilizing homeless youth for HIV prevention: a social network analysis of the acceptability of a face-to-face and online social networking intervention

    PubMed Central

    Rice, Eric; Tulbert, Eve; Cederbaum, Julie; Barman Adhikari, Anamika; Milburn, Norweeta G.

    2012-01-01

    The objective of the study is to use social network analysis to examine the acceptability of a youth-led, hybrid face-to-face and online social networking HIV prevention program for homeless youth.Seven peer leaders (PLs) engaged face-to-face homeless youth (F2F) in the creation of digital media projects (e.g. You Tube videos). PL and F2F recruited online youth (OY) to participate in MySpace and Facebook communities where digital media was disseminated and discussed. The resulting social networks were assessed with respect to size, growth, density, relative centrality of positions and homophily of ties. Seven PL, 53 F2F and 103 OY created two large networks. After the first 50 F2F youth participated, online networks entered a rapid growth phase. OY were among the most central youth in these networks. Younger aged persons and females were disproportionately connected to like youth. The program appears highly acceptable to homeless youth. Social network analysis revealed which PL were the most critical to the program and which types of participants (younger youth and females) may require additional outreach efforts in the future. PMID:22247453

  13. Inelastic neutron scattering from zircon

    SciTech Connect

    Nipko, J.C.; Loong, C.K.

    1997-07-14

    A lattice dynamical investigation of zircon (ZrSiO{sub 4}) has been carried out to obtain a microscopic understanding of its thermodynamic properties, as well as to examine possible soft modes that may contribute to the phase transformation to scheelite type under high pressure. We have measured the neutron weighted phonon density of states of zircon from a polycrystalline sample. The neutron spectra reveal one-phonon excitations extending to 1130 cm{sup -1}, with phonon bands centered at 226, 298, 363, 540, 661, 726, 945, and 1081 cm{sup -1}. A quantitative analysis of the neutron results was carried out using a lattice dynamical rigid-ion model. 4 refs., 3 figs.

  14. An Empirical Analysis of Citizens' Acceptance Decisions of Electronic-Government Services: A Modification of the Unified Theory of Acceptance and Use of Technology (UTAUT) Model to Include Trust as a Basis for Investigation

    ERIC Educational Resources Information Center

    Awuah, Lawrence J.

    2012-01-01

    Understanding citizens' adoption of electronic-government (e-government) is an important topic, as the use of e-government has become an integral part of governance. Success of such initiatives depends largely on the efficient use of e-government services. The unified theory of acceptance and use of technology (UTAUT) model has provided a…

  15. Inelastic Deformation of Metal Matrix Composites. Part 1; Plasticity and Damage Mechanisms

    NASA Technical Reports Server (NTRS)

    Majumdar, B. S.; Newaz, G. M.

    1992-01-01

    The deformation mechanisms of a Ti 15-3/SCS6 (SiC fiber) metal matrix composite (MMC) were investigated using a combination of mechanical measurements and microstructural analysis. The objectives were to evaluate the contributions of plasticity and damage to the overall inelastic response, and to confirm the mechanisms by rigorous microstructural evaluations. The results of room temperature experiments performed on 0 degree and 90 degree systems primarily are reported in this report. Results of experiments performed on other laminate systems and at high temperatures will be provided in a forthcoming report. Inelastic deformation of the 0 degree MMC (fibers parallel to load direction) was dominated by the plasticity of the matrix. In contrast, inelastic deformations of the 90 degree composite (fibers perpendicular to loading direction) occurred by both damage and plasticity. The predictions of a continuum elastic plastic model were compared with experimental data. The model was adequate for predicting the 0 degree response; however, it was inadequate for predicting the 90 degree response largely because it neglected damage. The importance of validating constitutive models using a combination of mechanical measurements and microstructural analysis is pointed out. The deformation mechanisms, and the likely sequence of events associated with the inelastic deformation of MMCs, are indicated in this paper.

  16. Inelastic scattering of atoms in a double well

    SciTech Connect

    Annibale, E. S.; Fialko, O.; Ziegler, K.

    2011-04-15

    We study a mixture of two light spin-1/2 fermionic atoms and two heavy atoms in a double-well potential. Inelastic scattering processes between both atomic species excite the heavy atoms and renormalize the tunneling rate and the interaction of the light atoms (polaron effect). The effective interaction of the light atoms changes its sign and becomes attractive for strong inelastic scattering. This is accompanied by a crossing of the energy levels from singly occupied sites at weak inelastic scattering to a doubly occupied and an empty site for stronger inelastic scattering. We are able to identify the polaron effect and the level crossing in the quantum dynamics.

  17. Production of Λ -hyperons in inelastic p+p interactions at 158 {GeV}/c

    NASA Astrophysics Data System (ADS)

    Aduszkiewicz, A.; Ali, Y.; Andronov, E.; Antićić, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Bogomilov, M.; Brandin, A.; Bravar, A.; Brzychczyk, J.; Bunyatov, S. A.; Busygina, O.; Christakoglou, P.; Ćirković, M.; Czopowicz, T.; Damyanova, A.; Davis, N.; Dembinski, H.; Deveaux, M.; Diakonos, F.; Di Luise, S.; Dominik, W.; Dumarchez, J.; Dynowski, K.; Engel, R.; Ereditato, A.; Feofilov, G. A.; Fodor, Z.; Garibov, A.; Gaździcki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hervé, A. E.; Hierholzer, M.; Igolkin, S.; Ivashkin, A.; Johnson, S. R.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kisiel, J.; Kobayashi, T.; Kolesnikov, V. I.; Kolev, D.; Kondratiev, V. P.; Korzenev, A.; Kowalik, K.; Kowalski, S.; Koziel, M.; Krasnoperov, A.; Kuich, M.; Kurepin, A.; Larsen, D.; László, A.; Lewicki, M.; Lyubushkin, V. V.; Maćkowiak-Pawłowska, M.; Maksiak, B.; Malakhov, A. I.; Manić, D.; Marcinek, A.; Marino, A. D.; Marton, K.; Mathes, H.-J.; Matulewicz, T.; Matveev, V.; Melkumov, G. L.; Messerly, B.; Mills, G. B.; Morozov, S.; Mrówczyński, S.; Nagai, Y.; Nakadaira, T.; Naskręt, M.; Nirkko, M.; Nishikawa, K.; Panagiotou, A. D.; Paolone, V.; Pavin, M.; Petukhov, O.; Pistillo, C.; Płaneta, R.; Popov, B. A.; Posiadała, M.; Puławski, S.; Puzović, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Wąs, E.; Robert, A.; Röhrich, D.; Rondio, E.; Roth, M.; Rubbia, A.; Rumberger, B. T.; Rustamov, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Schmidt, K.; Sekiguchi, T.; Selyuzhenkov, I.; Seryakov, A.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Słodkowski, M.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Ströbele, H.; Šuša, T.; Szuba, M.; Tada, M.; Taranenko, A.; Tefelski, D.; Tereshchenko, V.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberič, D.; Vechernin, V. V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarc, A.; Wyszyński, O.; Zambelli, L.; Zimmerman, E. D.

    2016-04-01

    Inclusive production of Λ -hyperons was measured with the large acceptance NA61/SHINE spectrometer at the CERN SPS in inelastic p+p interactions at beam momentum of 158 {GeV}/c. Spectra of transverse momentum and transverse mass as well as distributions of rapidity and x_{_F} are presented. The mean multiplicity was estimated to be 0.120 {± } 0.006(stat.){± }0.010(sys.). The results are compared with previous measurements and predictions of the Epos, Ur qmd and Fritiof models.

  18. Gender and Acceptance of E-Learning: A Multi-Group Analysis Based on a Structural Equation Model among College Students in Chile and Spain.

    PubMed

    Ramírez-Correa, Patricio E; Arenas-Gaitán, Jorge; Rondán-Cataluña, F Javier

    2015-01-01

    The scope of this study was to evaluate whether the adoption of e-learning in two universities, and in particular, the relationship between the perception of external control and perceived ease of use, is different because of gender differences. The study was carried out with participating students in two different universities, one in Chile and one in Spain. The Technology Acceptance Model was used as a theoretical framework for the study. A multi-group analysis method in partial least squares was employed to relate differences between groups. The four main conclusions of the study are: (1) a version of the Technology Acceptance Model has been successfully used to explain the process of adoption of e-learning at an undergraduate level of study; (2) the finding of a strong and significant relationship between perception of external control and perception of ease of use of the e-learning platform; (3) a significant relationship between perceived enjoyment and perceived ease of use and between results demonstrability and perceived usefulness is found; (4) the study indicates a few statistically significant differences between males and females when adopting an e-learning platform, according to the tested model. PMID:26465895

  19. Gender and Acceptance of E-Learning: A Multi-Group Analysis Based on a Structural Equation Model among College Students in Chile and Spain

    PubMed Central

    2015-01-01

    The scope of this study was to evaluate whether the adoption of e-learning in two universities, and in particular, the relationship between the perception of external control and perceived ease of use, is different because of gender differences. The study was carried out with participating students in two different universities, one in Chile and one in Spain. The Technology Acceptance Model was used as a theoretical framework for the study. A multi-group analysis method in partial least squares was employed to relate differences between groups. The four main conclusions of the study are: (1) a version of the Technology Acceptance Model has been successfully used to explain the process of adoption of e-learning at an undergraduate level of study; (2) the finding of a strong and significant relationship between perception of external control and perception of ease of use of the e-learning platform; (3) a significant relationship between perceived enjoyment and perceived ease of use and between results demonstrability and perceived usefulness is found; (4) the study indicates a few statistically significant differences between males and females when adopting an e-learning platform, according to the tested model. PMID:26465895

  20. Sampling and analysis validates acceptable knowledge on LANL transuranic, heterogeneous, debris waste, or ``Cutting the Gordian knot that binds WIPP``

    SciTech Connect

    Kosiewicz, S.T.; Triay, I.R.; Souza, L.A.; Michael, D.I.; Black, P.K.

    1999-02-01

    Through sampling and toxicity characteristic leaching procedure (TCLP) analyses, LANL and the DOE validated that a LANL transuranic (TRU) waste (TA-55-43, Lot No. 01) was not a Resource Recovery and Conservation Act (RCRA) hazardous waste. This paper describes the sampling and analysis project as well as the statistical assessment of the analytical results. The analyses were conducted according to the requirements and procedures in the sampling and analysis plan approved by the New Mexico Environmental Department. The plan used a statistical approach that was consistent with the stratified, random sampling requirements of SW-846. LANL adhered to the plan during sampling and chemical analysis of randomly selected items of the five major types of materials in this heterogeneous, radioactive, debris waste. To generate portions of the plan, LANL analyzed a number of non-radioactive items that were representative of the mix of items present in the waste stream. Data from these cold surrogates were used to generate means and variances needed to optimize the design. Based on statistical arguments alone, only two samples from the entire waste stream were deemed necessary, however a decision was made to analyze at least two samples of each of the five major waste types. To obtain these samples, nine TRU waste drums were opened. Sixty-six radioactively contaminated and four non-radioactive grab samples were collected. Portions of the samples were composited for chemical analyses. In addition, a radioactively contaminated sample of rust-colored powder of interest to the New Mexico Environment Department (NMED) was collected and qualitatively identified as rust.

  1. Coherent inelastic Mössbauer scattering of synchrotron radiation (abstract)

    NASA Astrophysics Data System (ADS)

    Belyakov, V. A.

    2002-03-01

    Recent success of coherent elastic [Nuclear Resonant Scattering of Synchrotron Radiation, Part A edited by E. Gerdau and H. de Woard (Baltzer Science, 2000), Hyperfine Interact. 123/124, Chap. 4] and incoherent inelastic (Hyperfine Interact. 123/124, Chap. 5) Mössbauer scattering of synchrotron radiation (SR) in investigations of very delicate properties of the condensed matter also makes it urgent to perform experiments on coherent inelastic Mössbauer scattering (CIMS) of synchrotron radiation (the common meaning of the term CIMS is coherent inelastic Mössbauer scattering accompanied by creation or annihilation of phonons in the crystal lattice, i.e., by very low energy losses of SR quanta). However up to now there were no publications on experimental observation of CIMS so there is a need in theoretical investigations to reveal the most favorable conditions for CIMS observation. The theory of CIMS is presented below and applied to specific processes of CIMS such as forward scattering, scattering at grazing incidence angles, and scattering via a cascade of Mössbauer transitions. It is shown that the phase matching (between the incident and scattered beam) is very important for the angular and frequency distribution in CIMS and processes where phase matching can be reached, which the best candidates for CIMS experimental investigations. The performed analysis shows that because of the phase matching demands the forward CIMS is suppressed significantly in comparison with the coherent elastic Mössbauer scattering [V. A. Belyakov, JETP Lett. 67, 8 (1998)] and more favorable for observation is CIMS at a nonzero scattering angle. Some examples of CIMS specific geometries are discussed. In particular, it is shown that for the grazing CIMS at isotope interface (a plane interface between regions with different abundance of the Mössbauer isotope) there is enhancement of CIMS at the critical angle of total reflection and suppression of CIMS at angles below the critical

  2. Precise neutron inelastic cross section measurements

    SciTech Connect

    Negret, Alexandru

    2012-11-20

    The design of a new generation of nuclear reactors requires the development of a very precise neutron cross section database. Ongoing experiments performed at dedicated facilities aim to the measurement of such cross sections with an unprecedented uncertainty of the order of 5% or even smaller. We give an overview of such a facility: the Gamma Array for Inelastic Neutron Scattering (GAINS) installed at the GELINA neutron source of IRMM, Belgium. Some of the most challenging difficulties of the experimental approach are emphasized and recent results are shown.

  3. Inelastic Scattering Of Electrons By Protons

    DOE R&D Accomplishments Database

    Cone, A. A.; Chen, K. W.; Dunning, J. R. Jr.; Hartwig, G.; Ramsey, N. F.; Walker, J. K.; Wilson, R.

    1966-12-01

    The inelastic scattering of electrons by protons has been measured at incident electron energies up to 5 BeV/c and momentum transfers q{sup 2}=4(BeV/c){sup 2}. Excitation of known nucleon resonances at M=1238, 1512, 1688 and possibly 1920 MeV have been observed. The calculations for the resonance at M=1238 MeV have been compared with calculations by Adler based on the dispersion theory of Chew, Goldberger, Low and Nambu. The agreement is good. Qualitative models are discussed for the other resonances.

  4. Strain accommodation in inelastic deformation of glasses

    NASA Astrophysics Data System (ADS)

    Murali, P.; Ramamurty, U.; Shenoy, Vijay B.

    2007-01-01

    Motivated by recent experiments on metallic glasses, we examine the micromechanisms of strain accommodation including crystallization and void formation during inelastic deformation of glasses by employing molecular statics simulations. Our atomistic simulations with Lennard-Jones-like potentials suggests that a softer short range interaction between atoms favors crystallization. Compressive hydrostatic strain in the presence of a shear strain promotes crystallization whereas a tensile hydrostatic strain is found to induce voids. The deformation subsequent to the onset of crystallization includes partial reamorphization and recrystallization, suggesting important atomistic mechanisms of plastic dissipation in glasses.

  5. On rainbow scattering in inelastic molecular collisions

    SciTech Connect

    Thomas, Lowell D.

    1980-01-01

    The purpose of this letter is to call attention to a growing misinterpretation in the literature on rainbow scattering in inelastic molecular collisions. The importance of rainbow structures in the angular distributions of elastic scattering cross sections is well established. However, use of approximate cross section formulas has led to an incorrect classification of the types of rainbows which are possible. Actually, however, it is possible to identify two classes of rainbows. If the relevant distributions and classifications are clearly stated, there should be little chance of confusion,

  6. Jet production and fragmentation properties in deep inelastic muon scattering

    NASA Astrophysics Data System (ADS)

    Arneodo, M.; Arvidson, A.; Aubert, J. J.; Badelek, B.; Beaufays, J.; Bee, C. P.; Benchouk, C.; Berghoff, G.; Bird, I.; Blum, D.; Böhm, E.; de Bouard, X.; Brasse, F. W.; Braun, H.; Broll, C.; Brown, S.; Brück, H.; Calen, H.; Chima, J. S.; Ciborowski, J.; Clifft, R.; Coignet, G.; Combley, F.; Conrad, J.; Coughlan, J.; D'Agostini, G.; Dahlgren, S.; Dengler, F.; Derado, I.; Dreyer, T.; Drees, J.; Drobnitzki, M.; Düren, M.; Eckardt, V.; Edwards, A.; Edwards, M.; Ernst, T.; Eszes, G.; Favier, J.; Ferrero, M. I.; Figiel, J.; Flauger, W.; Foster, J.; Ftàčnik, J.; Gabathuler, E.; Gajewski, J.; Gamet, R.; Gayler, J.; Geddes, N.; Grafström, P.; Grard, F.; Haas, J.; Hagberg, E.; Hasert, F. J.; Hayman, P.; Heusse, P.; Jaffre, M.; Jacholkowska, A.; Janata, F.; Jancso, G.; Johnson, A. S.; Kabuss, E. M.; Kellner, G.; Korbel, V.; Krüger, A.; Krüger, J.; Kullander, S.; Landgraf, U.; Lanske, D.; Loken, J.; Long, K.; Maire, M.; Malecki, P.; Manz, A.; Maselli, S.; Mohr, W.; Montanet, F.; Montgomery, H. E.; Nagy, E.; Nassalski, J.; Norton, P. R.; Oakham, F. G.; Osborne, A. M.; Pascaud, C.; Pawlik, B.; Payre, P.; Peroni, C.; Peschel, H.; Pessard, H.; Pettingale, J.; Pietrzyk, B.; Pietrzyk, U.; Pönsgen, B.; Pötsch, M.; Renton, P.; Ribarics, P.; Rith, K.; Rondio, E.; Sandacz, A.; Scheer, M.; Schlabböhmer, A.; Schiemann, H.; Schmitz, N.; Schneegans, M.; Scholz, M.; Schröder, T.; Schultze, K.; Sloan, T.; Stier, H. E.; Studt, M.; Taylor, G. N.; Thénard, J. M.; Thompson, J. C.; de La Torre, A.; Toth, J.; Urban, L.; Urban, L.; Wallucks, W.; Whalley, M.; Wheeler, S.; Williams, W. S. C.; Wimpenny, S. J.; Windmolders, R.; Wolf, G.; Ziemons, K.

    1987-12-01

    Results are presented from a study of deep inelastic 280 GeV muon-nucleon interactions on the transverse momenta and jet properties of the final state hadrons. The results are analysed in a way which attempts to separate the contributions of hard and soft QCD effects from those that arise from the fragmentation process. The fragmentation models with which the data are compared are the Lund string model, the independent jet model, the QCD parton shower model including soft gluon interference effects, and the firestring model. The discrimination between these models is discussed. Various methods of analysis of the data in terms of hard QCD processes are presented. From a study of the properties of the jet profiles a value of α s , to leading order, is determined using the Lund string model, namely α s =0.29±0.01 (stat.) ±0.02 (syst.), for Q 2˜20 GeV2.

  7. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    PubMed

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. PMID:23278470

  8. Field-theoretical description of deep inelastic scattering

    SciTech Connect

    Geyer, B.; Robaschik, D.; Wieczorek, E.

    1980-01-01

    The most important theoretical notions concerning deep inelastic scattering are reviewed. Topics discussed are the model-independent approach, which is based on the general principles of quantum field theory, the application of quantum chromodynamics to deep inelastic scattering, approaches based on the quark--parton model, the light cone algebra, and conformal invariance, and also investigations in the framework of perturbation theory.

  9. High energy-resolution inelastic x-ray scattering

    SciTech Connect

    Hastings, J.B.; Moncton, D.E.; Fujii

    1984-01-01

    A brief review is presented of various aspects of high energy-resolution inelastic x-ray scattering based on synchrotron sources. We show what kinematical advantages are provided by the photon probe and propose mirror and monochromator designs to achieve an optically efficient beam line for inelastic x-ray scattering.

  10. Damage-induced nonassociated inelastic flow in rock salt

    SciTech Connect

    Chan, K.S.; Bodner, S.R.; Brodsky, N.S.; Fossum, A.F.

    1993-06-01

    The multi-mechanism deformation coupled fracture model recently developed by CHAN, et al. (1992), for describing time-dependent, pressure-sensitive inelastic flow and damage evolution in crystalline solids was evaluated against triaxial creep experiments on rock salt. Guided by experimental observations, the kinetic equation and the flow law for damage-induced inelastic flow in the model were modified to account for the development of damage and inelastic dilatation in the transient creep regime. The revised model was then utilized to obtain the creep response and damage evolution in rock salt as a function of confining pressure and stress difference. Comparison between model calculation and experiment revealed that damage-induced inelastic flow is nonassociated, dilatational, and contributes significantly to the macroscopic strain rate observed in rock salt deformed at low confining pressures. The inelastic strain rate and volumetric strain due to damage decrease with increasing confining pressures, and all are suppressed at sufficiently high confining pressures.

  11. ATLAS ACCEPTANCE TEST

    SciTech Connect

    J.C. COCHRANE; J.V. PARKER; ET AL

    2001-06-01

    The acceptance test program for Atlas, a 23 MJ pulsed power facility for use in the Los Alamos High Energy Density Hydrodynamics program, has been completed. Completion of this program officially releases Atlas from the construction phase and readies it for experiments. Details of the acceptance test program results and of machine capabilities for experiments will be presented.

  12. Laparoscopic right hemicolectomy with complete mesocolic excision provides acceptable perioperative outcomes but is lengthy — analysis of learning curves for a novice minimally invasive surgeon

    PubMed Central

    Melich, George; Jeong, Duck Hyoun; Hur, Hyuk; Baik, Seung Hyuk; Faria, Julio; Kim, Nam Kyu; Min, Byung Soh

    2014-01-01

    Background Associated with reduced trauma, laparoscopic colon surgery is an alternative to open surgery. Furthermore, complete mesocolic excision (CME) has been shown to provide superior nodal yield and offers the prospect of better oncological outcomes. Methods All oncologic laparoscopic right colon resections with CME performed by a single surgeon since the beginning of his surgical practice were retrospectively analyzed for operative duration and perioperative outcomes. Results The study included 81 patients. The average duration of surgery was 220.0 (range 206–233) minutes. The initial durations of about 250 minutes gradually decreased to less than 200 minutes in an inverse linear relationship (y = −0.58x × 248). The major complication rate was 3.6% ± 4.2% and the average nodal yield was 31.3 ± 4.1. CumulativeSum analysis showed acceptable complication rates and oncological results from the beginning of surgeon’s laparoscopic career. Conclusion Developing laparoscopic skills can provide acceptable outcomes in advanced right hemicolectomy for a surgeon who primarily trained in open colorectal surgery. Operative duration is nearly triple that reported for conventional laparoscopic right hemicolectomy. The slow operative duration learning curve without a plateau reflects complex anatomy and the need for careful dissection around critical structures. Should one wish to adopt this strategy either based on some available evidence of superiority or with intention to participate in research, one has to change the view of right hemicolectomy being a rather simple case to being a complex, lengthy laparoscopic surgery. PMID:25265107

  13. INELASTIC DIFFRACTION AT HEAVY ION COLLIDERS.

    SciTech Connect

    WHITE, S.

    2005-01-01

    The heavy ion physics approach to global event characterization has led us to instrument the forward region in the PHENIX experiment at RHIC. In heavy ion collisions this coverage yields a measurement of the ''spectator'' energy and its distribution about the beam direction. This energy flow is the basis of event-by-event determination of the centrality and reaction plane which are key to analyzing particle production in heavy ion collisions. These same tools have also enabled a unique set of measurements on inelastic diffraction with proton, deuteron and gold ion beams in the PHENIX experiment. We present first new results on this topic and discuss briefly the opportunity for diffractive physics with Heavy Ion beams at the LHC.

  14. Medical applications of neutron inelastic scattering

    NASA Astrophysics Data System (ADS)

    Kehayias, Joseph J.; Banuk-Waitekus, Anathea; Valtuena, Silvia; Sheahan, Charles A.

    1999-10-01

    A sealed, D-T, pulsed neutron generator is used for the in vivo measurement of body carbon and oxygen by neutron inelastic scattering. The generator is operated at 10 KHz, at a neutron output of about 2 X 107 n/s/4(pi) . Gamma ray spectra are collected with two B4Ge3O12 crystal detectors. The measurements are used to measure fat and lean content and distribution in the body, with minimal radiation exposure (0.08 mSv). When combined with other measurements (such as total body potassium), this whole body scanning device provides us with the `quality of lean mass', a measurable outcome of treatments designed to improve nutritional status and function. The method is used in studies of human nutrition and for assessing the efficacy of new anti-obesity and anti-cachexia pharmaceuticals.

  15. Inclusive Inelastic Electron Scattering from Nuclei

    SciTech Connect

    Fomin, Nadia

    2007-10-26

    Inclusive electron scattering from nuclei at large x and Q{sup 2} is the result of a reaction mechanism that includes both quasi-elastic scattering from nucleons and deep inelastic scattering from the quark consitituents of the nucleons. Data in this regime can be used to study a wide variety of topics, including the extraction of nuclear momentum distributions, the infiuence of final state interactions and the approach to y-scaling, the strength of nucleon-nucleon correlations, and the approach to x-scaling, to name a few. Selected results from the recent experiment E02-019 at the Thomas Jefferson National Accelerator Facility will be shown and their relevance discussed.

  16. Inelastic guiding of electrons in polymer nanocapillaries

    SciTech Connect

    Das, S.; Dassanayake, B. S.; Winkworth, M.; Baran, J. L.; Tanis, J. A.; Stolterfoht, N.

    2007-10-15

    Electron transmission through insulating polymer nanocapillary (diameter 200 nm and aspect ratio 50) foils has been investigated for incident energies 500 and 1000 eV. Significant intensities of transmitted electrons were observed for foil tilt angles up to {approx}10 deg., and corresponding observation angles with respect to the incident beam direction, a phenomenon referred to as guiding. The transmitted electron spectra show substantial energy losses that increase with the capillary tilt angle, in sharp contrast to previous results for slow positive ions and lower energy electrons. Despite apparent close encounters with the capillary walls, inelastically scattered electrons are found to be guided at angles coinciding with elastically scattered electrons. These results suggest a means to study the dynamics of electron interactions with insulating materials, which is complicated by charge buildup in conventional surface scattering studies.

  17. Inelastic response of silicon to shock compression

    NASA Astrophysics Data System (ADS)

    Higginbotham, A.; Stubley, P. G.; Comley, A. J.; Eggert, J. H.; Foster, J. M.; Kalantar, D. H.; McGonegle, D.; Patel, S.; Peacock, L. J.; Rothman, S. D.; Smith, R. F.; Suggit, M. J.; Wark, J. S.

    2016-04-01

    The elastic and inelastic response of [001] oriented silicon to laser compression has been a topic of considerable discussion for well over a decade, yet there has been little progress in understanding the basic behaviour of this apparently simple material. We present experimental x-ray diffraction data showing complex elastic strain profiles in laser compressed samples on nanosecond timescales. We also present molecular dynamics and elasticity code modelling which suggests that a pressure induced phase transition is the cause of the previously reported ‘anomalous’ elastic waves. Moreover, this interpretation allows for measurement of the kinetic timescales for transition. This model is also discussed in the wider context of reported deformation of silicon to rapid compression in the literature.

  18. GiBUU and shallow inelastic scattering

    SciTech Connect

    Lalakulich, O.; Mosel, U.

    2015-05-15

    In this talk we shortly describe the physics contents of the GiBUU transport code, used to describe lepton scattering off nuclei. Particular attention will be given to validation of the GiBUU in pion-, electron- and photon-induced reactions, which serve as a benchmark for neutrino-induced ones. We mainly concentrate on those properties of benchmark reactions, which are relevant to the region of Shallow Inelastic Scattering (SIS). Our results in this region are presented for integrated and differential cross sections. Comparison with recent MINOS inclusive data, as well as predictions for the differential cross sections measurable in Minerνa and NoνA experiments are made.

  19. Inelastic Neutron Scattering Study of Mn

    SciTech Connect

    Zhong, Y.; Sarachik, M.P.; Friedman, J.R.; Robinson, R.A.; Kelley, T.M.; Nakotte, H.; Christianson, A.C.; Trouw, F.; Aubin, S.M.J.; Hendrickson, D.N.

    1998-11-09

    The authors report zero-field inelastic neutron scattering experiments on a 14-gram deuterated sample of Mn{sub 12}-Acetate consisting of a large number of identical spin-10 magnetic clusters. Their resolution enables them to see a series of peaks corresponding to transitions between the anisotropy levels within the spin-10 manifold. A fit to the spin Hamiltonian H = {minus}DS{sub z}{sup 2} + {mu}{sub B}B{center_dot}g{center_dot}S-BS{sub z}{sup 4} + C(S{sub +}{sup 4} + S{sub {minus}}{sup 4}) yields an anisotropy constant D = (0.54 {+-} 0.02) K and a fourth-order diagonal anisotropy coefficient B = (1.2 {+-} 0.1) x 10{sup {minus}3}K. Unlike EPR measurements, their experiments do not require a magnetic field and yield parameters that do not require knowledge of the g-value.

  20. Inelastic magnetic X-ray scattering

    NASA Astrophysics Data System (ADS)

    Platzman, P. M.; Tzoar, N.

    1985-04-01

    The theory of magnetic X-ray scattering is used to discuss the possibilities for employing inelastic scattering to probe the magnetic properties of condensed matter systems. In particular, it is shown how the interference between the nonmagnetic (Compton) and magnetic scattering arising from the use of circularly polarized X-rays is absolutely essential in such experiments. The very beautiful preliminary experiments by Sakai and Ono (1976) on Fe which use circularly polarized Moessbauer gamma-rays will be discussed. They already show the sensitivity of the technique to the 'magnetic form factor'. In addition, the physics of a unique quarter wave plate employed in obtaining circularly polarized X-rays is considered, and the implications of this advance for doing such experiments on existing synchrotron X-ray sources are discussed.

  1. Inelastic response of silicon to shock compression

    DOE PAGESBeta

    Higginbotham, Andrew; Stubley, P. G.; Comley, A. J.; Eggert, J. H.; Foster, J. M.; Kalantar, D. H.; McGonegle, D.; Patel, S.; Peacock, L. J.; Rothman, S. D.; et al

    2016-04-13

    The elastic and inelastic response of [001] oriented silicon to laser compression has been a topic of considerable discussion for well over a decade, yet there has been little progress in understanding the basic behaviour of this apparently simple material. We present experimental x-ray diffraction data showing complex elastic strain profiles in laser compressed samples on nanosecond timescales. We also present molecular dynamics and elasticity code modelling which suggests that a pressure induced phase transition is the cause of the previously reported ‘anomalous’ elastic waves. Moreover, this interpretation allows for measurement of the kinetic timescales for transition. Lastly, this modelmore » is also discussed in the wider context of reported deformation of silicon to rapid compression in the literature.« less

  2. Inelastic response of silicon to shock compression

    PubMed Central

    Higginbotham, A.; Stubley, P. G.; Comley, A. J.; Eggert, J. H.; Foster, J. M.; Kalantar, D. H.; McGonegle, D.; Patel, S.; Peacock, L. J.; Rothman, S. D.; Smith, R. F.; Suggit, M. J.; Wark, J. S.

    2016-01-01

    The elastic and inelastic response of [001] oriented silicon to laser compression has been a topic of considerable discussion for well over a decade, yet there has been little progress in understanding the basic behaviour of this apparently simple material. We present experimental x-ray diffraction data showing complex elastic strain profiles in laser compressed samples on nanosecond timescales. We also present molecular dynamics and elasticity code modelling which suggests that a pressure induced phase transition is the cause of the previously reported ‘anomalous’ elastic waves. Moreover, this interpretation allows for measurement of the kinetic timescales for transition. This model is also discussed in the wider context of reported deformation of silicon to rapid compression in the literature. PMID:27071341

  3. Inelastic response of silicon to shock compression.

    PubMed

    Higginbotham, A; Stubley, P G; Comley, A J; Eggert, J H; Foster, J M; Kalantar, D H; McGonegle, D; Patel, S; Peacock, L J; Rothman, S D; Smith, R F; Suggit, M J; Wark, J S

    2016-01-01

    The elastic and inelastic response of [001] oriented silicon to laser compression has been a topic of considerable discussion for well over a decade, yet there has been little progress in understanding the basic behaviour of this apparently simple material. We present experimental x-ray diffraction data showing complex elastic strain profiles in laser compressed samples on nanosecond timescales. We also present molecular dynamics and elasticity code modelling which suggests that a pressure induced phase transition is the cause of the previously reported 'anomalous' elastic waves. Moreover, this interpretation allows for measurement of the kinetic timescales for transition. This model is also discussed in the wider context of reported deformation of silicon to rapid compression in the literature. PMID:27071341

  4. Prospects for dark matter detection with inelastic transitions of xenon

    NASA Astrophysics Data System (ADS)

    McCabe, Christopher

    2016-05-01

    Dark matter can scatter and excite a nucleus to a low-lying excitation in a direct detection experiment. This signature is distinct from the canonical elastic scattering signal because the inelastic signal also contains the energy deposited from the subsequent prompt de-excitation of the nucleus. A measurement of the elastic and inelastic signal will allow a single experiment to distinguish between a spin-independent and spin-dependent interaction. For the first time, we characterise the inelastic signal for two-phase xenon detectors in which dark matter inelastically scatters off the 129Xe or 131Xe isotope. We do this by implementing a realistic simulation of a typical tonne-scale two-phase xenon detector and by carefully estimating the relevant background signals. With our detector simulation, we explore whether the inelastic signal from the axial-vector interaction is detectable with upcoming tonne-scale detectors. We find that two-phase detectors allow for some discrimination between signal and background so that it is possible to detect dark matter that inelastically scatters off either the 129Xe or 131Xe isotope for dark matter particles that are heavier than approximately 010 GeV . If, after two years of data, the XENON1T search for elastic scattering nuclei finds no evidence for dark matter, the possibility of ever detecting an inelastic signal from the axial-vector interaction will be almost entirely excluded.

  5. Comparative efficacy and acceptability of first-generation and second-generation antidepressants in the acute treatment of major depression: protocol for a network meta-analysis

    PubMed Central

    Salanti, Georgia; Atkinson, Lauren Z; Leucht, Stefan; Ruhe, Henricus G; Turner, Erick H; Chaimani, Anna; Ogawa, Yusuke; Takeshima, Nozomi; Hayasaka, Yu; Imai, Hissei; Shinohara, Kiyomi; Suganuma, Aya; Watanabe, Norio; Stockton, Sarah; Geddes, John R

    2016-01-01

    Introduction Many antidepressants are indicated for the treatment of major depression. Two network meta-analyses have provided the most comprehensive assessments to date, accounting for both direct and indirect comparisons; however, these reported conflicting interpretation of results. Here, we present a protocol for a systematic review and network meta-analysis aimed at updating the evidence base and comparing all second-generation as well as selected first-generation antidepressants in terms of efficacy and acceptability in the acute treatment of major depression. Methods and analysis We will include all randomised controlled trials reported as double-blind and comparing one active drug with another or with placebo in the acute phase treatment of major depression in adults. We are interested in comparing the following active agents: agomelatine, amitriptyline, bupropion, citalopram, clomipramine, desvenlafaxine, duloxetine, escitalopram, fluoxetine, fluvoxamine, levomilnacipran, milnacipran, mirtazapine, nefazodone, paroxetine, reboxetine, sertraline, trazodone, venlafaxine, vilazodone and vortioxetine. The main outcomes will be the proportion of patients who responded to or dropped out of the allocated treatment. Published and unpublished studies will be sought through relevant database searches, trial registries and websites; all reference selection and data extraction will be conducted by at least two independent reviewers. We will conduct a random effects network meta-analysis to synthesise all evidence for each outcome and obtain a comprehensive ranking of all treatments. To rank the various treatments for each outcome, we will use the surface under the cumulative ranking curve and the mean ranks. We will employ local as well as global methods to evaluate consistency. We will fit our model in a Bayesian framework using OpenBUGS, and produce results and various checks in Stata and R. We will also assess the quality of evidence contributing to network

  6. Acceptance, values, and probability.

    PubMed

    Steel, Daniel

    2015-10-01

    This essay makes a case for regarding personal probabilities used in Bayesian analyses of confirmation as objects of acceptance and rejection. That in turn entails that personal probabilities are subject to the argument from inductive risk, which aims to show non-epistemic values can legitimately influence scientific decisions about which hypotheses to accept. In a Bayesian context, the argument from inductive risk suggests that value judgments can influence decisions about which probability models to accept for likelihoods and priors. As a consequence, if the argument from inductive risk is sound, then non-epistemic values can affect not only the level of evidence deemed necessary to accept a hypothesis but also degrees of confirmation themselves. PMID:26386533

  7. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Freedman, Russell

    1988-01-01

    Presents the Newbery Medal acceptance speech of Russell Freedman, writer of children's nonfiction. Discusses the place of nonfiction in the world of children's literature, the evolution of children's biographies, and the author's work on "Lincoln." (ARH)

  8. Newbery Medal Acceptance.

    ERIC Educational Resources Information Center

    Cleary, Beverly

    1984-01-01

    Reprints the text of Ms. Cleary's Newbery medal acceptance speech in which she gives personal history concerning her development as a writer and her response to the letters she receives from children. (CRH)

  9. Caldecott Medal Acceptance.

    ERIC Educational Resources Information Center

    Provensen, Alice; Provensen, Martin

    1984-01-01

    Reprints the text of the Provensens' Caldecott medal acceptance speech in which they describe their early interest in libraries and literature, the collaborative aspect of their work, and their current interest in aviation. (CRH)

  10. Inclusive inelastic scattering of heavy ions and nuclear correlations

    NASA Technical Reports Server (NTRS)

    Cucinotta, Francis A.; Townsend, Lawrence W.; Wilson, John W.; Khandelwal, Govind S.

    1990-01-01

    Calculations of inclusive inelastic scattering distributions for heavy ion collisions are considered within the high energy optical model. Using ground state sum rules, the inclusive projectile and complete projectile-target inelastic angular distributions are treated in both independent particle and correlated nuclear models. Comparisons between the models introduced are made for alpha particles colliding with He-4, C-12, and O-16 targets and protons colliding with O-16. Results indicate that correlations contribute significantly, at small momentum transfers, to the inelastic sum. Correlation effects are hidden, however, when total scattering distributions are considered because of the dominance of elastic scattering at small momentum transfers.