Science.gov

Sample records for ionizante em pele

  1. Io Pele plume

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Voyager 1 took this narrow-angle camera image on 5 March 1979 from a distance of 450,000 kilometers. At this geometry, the camera looks straight down through a volcanic plume at one of Io's most active volcanos, Pele. The large heart-shaped feature is the region where Pele's plume falls to the surface. At the center of the 'heart' is the small dark fissure that is the source of the eruption. The Voyager Project is managed by the Jet Propulsion Laboratory for NASA's Office of Space Science.

  2. Pele Plume Deposit on Io

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The varied effects of Ionian volcanism can be seen in this false color infrared composite image of Io's trailing hemisphere. Low resolution color data from Galileo's first orbit (June, 1996) have been combined with a higher resolution clear filter picture taken on the third orbit (November, 1996) of the spacecraft around Jupiter.

    A diffuse ring of bright red material encircles Pele, the site of an ongoing, high velocity volcanic eruption. Pele's plume is nearly invisible, except in back-lit photographs, but its deposits indicate energetic ejection of sulfurous materials out to distances more than 600 kilometers from the central vent. Another bright red deposit lies adjacent to Marduk, also a currently active ediface. High temperature hot spots have been detected at both these locations, due to the eruption of molten material in lava flows or lava lakes. Bright red deposits on Io darken and disappear within years or decades of deposition, so the presence of bright red materials marks the sites of recent volcanism.

    This composite was created from data obtained by the Solid State Imaging (CCD) system aboard NASA's Galileo spacecraft. The region imaged is centered on 15 degrees South, 224 degrees West, and is almost 2400 kilometers across. The finest details that can be discerned in this picture are about 3 kilometers across. North is towards the top of the picture and the sun illuminates the surface from the west.

    The Jet Propulsion Laboratory, Pasadena, CA manages the mission for NASA's Office of Space Science, Washington, DC.

    This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://galileo.jpl.nasa.gov. Background information and educational context for the images can be found at URL http://www.jpl.nasa.gov/galileo/sepo

  3. PyPele Rewritten To Use MPI

    NASA Technical Reports Server (NTRS)

    Hockney, George; Lee, Seungwon

    2008-01-01

    A computer program known as PyPele, originally written as a Pythonlanguage extension module of a C++ language program, has been rewritten in pure Python language. The original version of PyPele dispatches and coordinates parallel-processing tasks on cluster computers and provides a conceptual framework for spacecraft-mission- design and -analysis software tools to run in an embarrassingly parallel mode. The original version of PyPele uses SSH (Secure Shell a set of standards and an associated network protocol for establishing a secure channel between a local and a remote computer) to coordinate parallel processing. Instead of SSH, the present Python version of PyPele uses Message Passing Interface (MPI) [an unofficial de-facto standard language-independent application programming interface for message- passing on a parallel computer] while keeping the same user interface. The use of MPI instead of SSH and the preservation of the original PyPele user interface make it possible for parallel application programs written previously for the original version of PyPele to run on MPI-based cluster computers. As a result, engineers using the previously written application programs can take advantage of embarrassing parallelism without need to rewrite those programs.

  4. PELE'S HAIR: case studies from Kilauea

    NASA Astrophysics Data System (ADS)

    Cannata, C. B.

    2010-12-01

    Pele’s hair are long, thin strands of basaltic volcanic glass formed when small drops of magma are spun or drawn out by the wind or streams of volcanic gas into long hair-like strands. Named for Pele, the Hawaiian goddess of fire, they are basically found in Hawaiian eruption deposits. Pele’s hair is deep yellow or gold and is commonly found downwind from active vents concentrated in hollows or other low energy ‘traps’. In literature the origin of these thin strands of glass have been linked to fountains from Hawaiian eruptions. Beside the high fountaining, Pele’s hair are actually found in other environments. In this work we investigated in detail the dimensions, surface textures and the nature of Pele’s hair, from four typical environment of formation at Hawaiian volcanoes: high fountaining, weak explosive activity, lava ocean entry and a lava skylight. Samples has been characterized in terms of textural and morphological features, in thin section and under the SEM. Pele’s hair consists of long strands of gold sideromelane, showing variable length, from an half mm to tens of mm, often without surface vesicles and sometimes including Pele’s tears inside or at the end. They are often found incomplete, since they are easily broken on landing or even during transport. Their surfaces are mostly rough, with ‘ploughs’ of different sizes and large cavities. Vesicles are visible in the cross sections of Pele’s hair. There are two mostly size population of bubbles: one elongated and central and parallel to the axis of elongation and the other one smaller, and rounded and dispersed across the cross section of the fibers. Pele’s hair often shows, in thin section, a single inner elongate vesicle in the middle of the fragment linked to bubble coalescence phenomena, along the entire length of the hair. Samples from the four volcanic environments show different features in terms of their shape, surface textures and micro-textures, pointing out that

  5. Pele III, plate tectonics, atmospheric and biotic evolution

    SciTech Connect

    Sloan, R.E. . Dept. of Geology and Geophysics)

    1994-04-01

    This paper is an elaboration of Pele I and II, Landis et al GSA Abstr. V. 25 No.6, and Hengst et al GSA Abstr. V. 25 No.6. The Pele hypothesis is that CO[sub 2] concentration in the atmosphere is directly related to the rate of seafloor spreading and the existence of superplumes. Excess CO[sub 2] favors expansion of plants and is converted to O[sub 2] by photosynthesis and deposition of buried carbon and carbonate. O[sub 2] is removed from the atmosphere by weathering. Resulting major variations in atmospheric CO[sub 2] and O[sub 2] have significant impact on the evolution and extinction of organisms.

  6. Discovery of gaseous S2 in Io's Pele plume.

    PubMed

    Spencer, J R; Jessup, K L; McGrath, M A; Ballester, G E; Yelle, R

    2000-05-19

    Spectroscopy of Io's Pele plume against Jupiter by the Hubble Space Telescope in October 1999 revealed absorption due to S2 gas, with a column density of 1.0 +/- 0.2 x 10(16) per square centimeter, and probably also SO(2) gas with a column density of 7 +/- 3 x 10(16) per square centimeter. This SO2/S2 ratio (3 to 12) is expected from equilibration with silicate magmas near the quartz-fayalite-magnetite or wüstite-magnetite buffers. Condensed S3 and S4, probable coloring agents in Pele's red plume deposits, may form by polymerization of the S2, which is unstable to ultraviolet photolysis. Diffuse red deposits near other Io volcanoes suggest that venting and polymerization of S2 gas is a widespread feature of Io volcanism. PMID:10817990

  7. A first step toward lunar development: Project Pele.

    NASA Astrophysics Data System (ADS)

    Duke, M. B.

    In the exploration and development of the Moon a fundamental step will be to understand the distribution of lunar resources and the processes by which they were emplaced. Project Pele is a proposed Discovery Program lunar lander mission, targeted to survey and characterize a complex volcanic region of the Moon. The primary objective of the Pele mission is to investigate the nature of the volcanic deposits in the vicinity of the lunar crater Aristarchus, to understand the sequence of volcanic flow and pyroclastic events that built up the Aristarchus Plateau, to examine the Schröter's Valley Rille, and, if time allows, to study the nature of the ejecta from the Aristarchus crater. Beside the fundamental understanding of the volcanic processes, the mission would also allow, for the first time, the in situ characterization of the resource potential of the region. The Pele mission will relate fundamental understanding of lunar volcanism with the distribution and use of lunar resources. Additionally, it will stimulate the development of new telerobotic technologies for planetary surface investigation and eventual resource utilization.

  8. Use of Mobile Testing System PeLe for Developing Language Skills

    ERIC Educational Resources Information Center

    Titova, Svetlana

    2015-01-01

    One of the objectives of this paper is to investigate the pedagogical impact of both the mobile testing system PeLe (Norway, HiST) and the enquiry-based learning approach on language skills development in the context of mobile-assisted learning. The research aims to work out a methodological framework of PeLe implementation into the language…

  9. Eruption Conditions of Pele Volcano on Io Inferred from Chemistry of Its Volcanic Plume

    NASA Technical Reports Server (NTRS)

    Zolotov, M. Yu.; Fegley, B., Jr.

    2000-01-01

    We used thermodynamic models and HST observations of Pele plume to calculate the temperature (1430 K) and oxidation state (log fO2 = -11.7) of volcanic gases and magmas of Pele. Our estimated vent pressure is 10(exp -3) to 10(exp -5) bars.

  10. Observations and temperatures of Io's Pele Patera from Cassini and Galileo spacecraft images

    USGS Publications Warehouse

    Radebaugh, J.; McEwen, A.S.; Milazzo, M.P.; Keszthelyi, L.P.; Davies, A.G.; Turtle, E.P.; Dawson, D.D.

    2004-01-01

    Pele has been the most intense high-temperature hotspot on Io to be continuously active during the Galileo monitoring from 1996-2001. A suite of characteristics suggests that Pele is an active lava lake inside a volcanic depression. In 2000-2001, Pele was observed by two spacecraft, Cassini and Galileo. The Cassini observations revealed that Pele is variable in activity over timescales of minutes, typical of active lava lakes in Hawaii and Ethiopia. These observations also revealed that the short-wavelength thermal emission from Pele decreases with rotation of Io by a factor significantly greater than the cosine of the emission angle, and that the color temperature becomes more variable and hotter at high emission angles. This behavior suggests that a significant portion of the visible thermal emission from Pele comes from lava fountains within a topographically confined lava body. High spatial resolution, nightside images from a Galileo flyby in October 2001 revealed a large, relatively cool (< 800 K) region, ringed by bright hotspots, and a central region of high thermal emission, which is hypothesized to be due to fountaining and convection in the lava lake. Images taken through different filters revealed color temperatures of 1500 ?? 80 K from Cassini ISS data and 1605 ?? 220 and 1420 ?? 100 K from small portions of Galileo SSI data. Such temperatures are near the upper limit for basaltic compositions. Given the limitations of deriving lava eruption temperature in the absence of in situ measurement, it is possible that Pele has lavas with ultramafic compositions. The long-lived, vigorous activity of what is most likely an actively overturning lava lake in Pele Patera indicates that there is a strong connection to a large, stable magma source region. ?? 2003 Elsevier Inc. All rights reserved.

  11. Changes east of Pele between Galileo's first two orbits

    NASA Technical Reports Server (NTRS)

    1996-01-01

    Detail of changes east of Pele on Jupiter's moon Io as seen by NASA's Galileo spacecraft between June (left) and September (right) 1996. The caldera at the center of the images that changes from bright to dark is approximately 80 kilometers in diameter. Some scientists speculate that this brightness (albedo) change might be due to flooding of the crater floor by lava. The left frame was reprojected and stretched to match the geometry and average colors of the right frame. Before this stretch, the earlier image (left) was significantly redder than the later image (right); this may be due to variations in lighting. Both frames were created with images from the Galileo Solid State Imaging system's near-infrared (756 nm), green, and violet filters. North is to the top of both frames.

    The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech).

    This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://galileo.jpl.nasa.gov. Background information and educational context for the images can be found at URL http://www.jpl.nasa.gov/galileo/sepo

  12. Chemistry of hydrothermal solutions from Pele's Vents, Loihi Seamount, Hawaii

    SciTech Connect

    Sedwick, P.N.; McMurtry, G.M. ); Macdougall, J.D. )

    1992-10-01

    Hydrothermal fluids were sampled from Pele's Vents on the summit of Loihi Seamount, an intraplate, hotspot volcano, on four occasions from February 1987 to September 1990. The warm ([le]31C) vent solutions are enriched in dissolved Si, CO[sub 2], H[sub 2]S, alkalinity, K[sup +], Li[sup +], Rb[sup +], Ca[sup 2+], Ba[sup 2+], Fe[sup 2+], Mn[sup 2+], NH[sup +][sub 4], and possibly Ni[sup 2+], and depleted in SO[sup 2-][sub 4], O[sub 2], Mg[sup 2+], [sup 87]Sr/[sup 86]Sr, NO[sup -][sub 3], and sometimes Cl[sup -] and Na[sup +] (calculated), relative to ambient seawater. Dissolved Si correlates linearly with sample temperature, suggesting that the solutions sampled from numerous vents in the [approximately]20 m diameter field have a common source and that Si can be used as a conservative tracer for mixing of the vent fluids with ambient seawater. These juvenile inputs likely reflect the shallow, hotspot setting of this hydrothermal system. A simple quantitative fluid-history model is considered and shown to be consistent with mass-balance constraints and saturation-state calculations, which suggest that the Si concentration of the fluids may be controlled by amorphous silica saturation at [approximately]31C. Observed temporal variations in fluid composition between expeditions - specifically, in Cl[sup -], A[sub T], C[sub T], Na[sup +] (calculated), Mg[sup 2+], Ca[sup 2+], Sr[sup 2+], [sup 87]Sr/[sup 86]Sr, Fe[sup 2+], Mn[sup 2+] and perhaps NH[sup +][sub 4], relative to Si - are, excepting Mg[sup 2+], [sup 87]Sr/[sup 86]Sr, and Mn[sup 2+], consistent with the effects of variable phase segregation at the proposed high-temperature endmember.

  13. PELE web server: atomistic study of biomolecular systems at your fingertips.

    PubMed

    Madadkar-Sobhani, Armin; Guallar, Victor

    2013-07-01

    PELE, Protein Energy Landscape Exploration, our novel technology based on protein structure prediction algorithms and a Monte Carlo sampling, is capable of modelling the all-atom protein-ligand dynamical interactions in an efficient and fast manner, with two orders of magnitude reduced computational cost when compared with traditional molecular dynamics techniques. PELE's heuristic approach generates trial moves based on protein and ligand perturbations followed by side chain sampling and global/local minimization. The collection of accepted steps forms a stochastic trajectory. Furthermore, several processors may be run in parallel towards a collective goal or defining several independent trajectories; the whole procedure has been parallelized using the Message Passing Interface. Here, we introduce the PELE web server, designed to make the whole process of running simulations easier and more practical by minimizing input file demand, providing user-friendly interface and producing abstract outputs (e.g. interactive graphs and tables). The web server has been implemented in C++ using Wt (http://www.webtoolkit.eu) and MySQL (http://www.mysql.com). The PELE web server, accessible at http://pele.bsc.es, is free and open to all users with no login requirement. PMID:23729469

  14. User's manual for PELE3D: a computer code for three-dimensional incompressible fluid dynamics

    SciTech Connect

    McMaster, W H

    1982-05-07

    The PELE3D code is a three-dimensional semi-implicit Eulerian hydrodynamics computer program for the solution of incompressible fluid flow coupled to a structure. The fluid and coupling algorithms have been adapted from the previously developed two-dimensional code PELE-IC. The PELE3D code is written in both plane and cylindrical coordinates. The coupling algorithm is general enough to handle a variety of structural shapes. The free surface algorithm is able to accommodate a top surface and several independent bubbles. The code is in a developmental status since all the intended options have not been fully implemented and tested. Development of this code ended in 1980 upon termination of the contract with the Nuclear Regulatory Commission.

  15. Thermal signature, eruption style, and eruption evolution at Pele and Pillan on Io

    USGS Publications Warehouse

    Davies, A.G.; Keszthelyi, L.P.; Williams, D.A.; Phillips, C.B.; McEwen, A.S.; Lopes, R.M.C.; Smythe, W.D.; Kamp, L.W.; Soderblom, L.A.; Carlson, R.W.

    2001-01-01

    The Galileo spacecraft has been periodically monitoring volcanic activity on Io since June 1996, making it possible to chart the evolution of individual eruptions. We present results of coanalysis of Near-Infrared Mapping Spectrometer (NIMS) and solid-state imaging (SSI) data of eruptions at Pele and Pillan, especially from a particularly illuminating data set consisting of mutually constraining, near-simultaneous NIMS and SSI observations obtained during orbit C9 in June 1997. The observed thermal signature from each hot spot, and the way in which the thermal signature changes with time, tightly constrains the possible styles of eruption. Pele and Pillan have very different eruption styles. From September 1996 through May 1999, Pele demonstrates an almost constant total thermal output, with thermal emission spectra indicative of a long-lived, active lava lake. The NIMS Pillan data exhibit the thermal signature of a "Pillanian" eruption style, a large, vigorous eruption with associated open channel, or sheet flows, producing an extensive flow field by orbit C10 in September 1997. The high mass eruption rate, high liquidus temperature (at least 1870 K) eruption at Pillan is the best candidate so far for an active ultramafic (magnesium-rich, "komatiitic") flow on Io, a style of eruption never before witnessed. The thermal output per unit area from Pillan is, however, consistent with the emplacement of large, open-channel flows. Magma temperature at Pele is ???1600 K. If the magma temperature is 1600 K, it suggests a komatiitic-basalt composition. The power output from Pele is indicative of a magma volumetric eruption rate of ???250 to 340 m3 s-1. Although the Pele lava lake is considerably larger than its terrestrial counterparts, the power and mass fluxes per unit area are similar to active terrestrial lava lakes. Copyright 2001 by the American Geophysical Union.

  16. Galileo SSI and Cassini ISS Observations of Io's Pele Hotspot: Temperatures, Areas, and Variation with Time

    NASA Technical Reports Server (NTRS)

    Radebaugh, J.; McEwen, A. S.; Milazzo, M.; Davies, A. G.; Keszthelyi, L. P.; Geissler, P.

    2002-01-01

    Temperatures of Io's Pele hotspot were found using dual-filter observations from Galileo and Cassini. Temperatures average 1375 K, but vary widely over tens of minutes. Dropoff in emission with rotation consistent with lava fountaining at a lava lake. Additional information is contained in the original extended abstract.

  17. PELE web server: atomistic study of biomolecular systems at your fingertips

    PubMed Central

    Madadkar-Sobhani, Armin; Guallar, Victor

    2013-01-01

    PELE, Protein Energy Landscape Exploration, our novel technology based on protein structure prediction algorithms and a Monte Carlo sampling, is capable of modelling the all-atom protein–ligand dynamical interactions in an efficient and fast manner, with two orders of magnitude reduced computational cost when compared with traditional molecular dynamics techniques. PELE’s heuristic approach generates trial moves based on protein and ligand perturbations followed by side chain sampling and global/local minimization. The collection of accepted steps forms a stochastic trajectory. Furthermore, several processors may be run in parallel towards a collective goal or defining several independent trajectories; the whole procedure has been parallelized using the Message Passing Interface. Here, we introduce the PELE web server, designed to make the whole process of running simulations easier and more practical by minimizing input file demand, providing user-friendly interface and producing abstract outputs (e.g. interactive graphs and tables). The web server has been implemented in C++ using Wt (http://www.webtoolkit.eu) and MySQL (http://www.mysql.com). The PELE web server, accessible at http://pele.bsc.es, is free and open to all users with no login requirement. PMID:23729469

  18. Characterizing Io’s Pele, Tvashtar and Pillan plumes: Lessons learned from Hubble

    NASA Astrophysics Data System (ADS)

    Jessup, Kandis Lea; Spencer, John R.

    2012-03-01

    Hubble Space Telescope/Wide Field and Planetary Camera 2 (HST/WFPC2) images of Io obtained between 1995 and 2007 between 0.24 and 0.42 μm led to the detection of the Pele plume in reflected sunlight in 1995 and 1999; imaging of the Pele plume via absorption of jovian light in 1996 and 1999; detection of the Prometheus-type Pillan plume in reflected sunlight in 1997; and detection of the 2007 Pele-type Tvashtar plume eruption in reflected sunlight and via absorption of jovian light. Based on a detailed analysis of these observations we characterize and compare the gas and dust properties of each of the detected plumes. In each case, the brightness of the plumes in reflected sunlight is less at 0.26 μm than at 0.33 μm. Mie scattering analysis of the wavelength dependence of each plume’s reflectance signature suggests that range of particle sizes within the plumes is quite narrow. Assuming a normal distribution of particle sizes, the range of mean particle sizes is ∼0.035-0.12 μm for the 1997 Pillan eruption, ∼0.05-0.08 μm for the 1999 Pele and 2007 Tvasthar plumes, and ∼0.05-0.11 μm for the 1995 Pele plume, and in each case the standard deviation in the particle size distribution is <15%. The Mie analysis also suggests that the 2007 Tvashtar eruption released ∼109 g of sulfur dust, the 1999 Pele eruption released ∼109 g of SO2 dust, the 1997 Pillan eruption released ∼1010 g of SO2 dust, and the 1995 Pele plume may have released ∼1010 g of SO2 dust. Analysis of the plume absorption signatures recorded in the F255W filter bandpass (0.24-0.28 μm) indicates that the opacity of the 2007 Tvashtar plume was 2× that of the 1996 and 1999 Pele plume eruptions. While the sulfur dust density estimated for the Tvashtar from the reflected sunlight data could have produced 61% of the observed plume opacity, <10% of the 1999 Pele F255W plume opacity could have resulted from the SO2 dust detected in the eruption. Accounting for the remaining F255W opacity

  19. DNA sequence of the Peromyscus leucopus MHC class II gene Aa (MhcPeleAa)

    SciTech Connect

    Crew, M.D.; Bates, L.M.

    1996-09-01

    The genus Peromyscus has been extensively studied by populations biologists and ecologists for over eighty years, with P. leucopus (the white-footed mouse) being one of the most intensively investigated species. Polymorphic major histocompatibility complex (MHC) genes have proven useful in population genetic studies and might be helpful in understanding the population dynamics of Peromyscus species which are ubiquitously distributed over North and Central America. Polymorphism of P. leucopus MHC (MhcPele) class II genes was evident by restriction fragment length polymorphism (RFLP) analyses using human and mouse probes and Pele class II loci exhibited degrees of polymorphism similar to H2 class II genes (A-like>E-like). 8 refs., 2 figs.

  20. Io's theothermal (sulfur) - Lithosphere cycle inferred from sulfur solubility modeling of Pele's magma supply

    NASA Astrophysics Data System (ADS)

    Battaglia, Steven M.; Stewart, Michael A.; Kieffer, Susan W.

    2014-06-01

    Surface deposits of volatile compounds such as water (Earth) or sulfur (Io) on volcanically active bodies suggest that a magmatic distillation process works to concentrate volatiles in surface reservoirs. On Earth, this is the combined hydrologic and tectonic cycle. On Io, sulfurous compounds are transferred from the interior to the surface reservoirs through a combination of a mantle-sourced magmatic system, vertical cycling of the lithosphere, and a sulfur-dominated crustal thermal system that we here call the "theothermal" system. We present a geochemical analysis of this process using previously inferred temperature and oxygen fugacity constraints of Pele's basaltic magma to determine the behavior of sulfur in the ionian magmas. Sulfate to sulfide ratios of Pele's magma are -4.084 ± 0.6 and -6.442 ± 0.7 log10 units, comparable to or lower than those of mid-ocean ridge basalts. This reflects the similarity of Io's oxidation state with Earth's depleted mantle as previously suggested by Zolotov and Fegley (Zolotov, M.Y., Fegley, B. [2000]. Geophys. Res. Lett. 27, 2789-2792). Our calculated limits of sulfur solubility in melts from Pele's patera (˜1100-1140 ppm) are also comparable to terrestrial mid-ocean ridge basalts, reflecting a compositional similarity of mantle sources. We propose that the excess sulfur obvious on Io's surface comes from two sources: (1) an insoluble sulfide liquid phase in the magma and (2) theothermal near-surface recycling.

  1. Three-dimensional simulation of gas and dust in Io's Pele plume

    NASA Astrophysics Data System (ADS)

    McDoniel, William J.; Goldstein, David B.; Varghese, Philip L.; Trafton, Laurence M.

    2015-09-01

    Io's giant Pele plume rises high above the moon's surface and produces a complex deposition pattern. We use the direct simulation Monte Carlo (DSMC) method to model the flow of SO2 gas and silicate ash from the surface of the lava lake, into the umbrella-shaped canopy of the plume, and eventually onto the surface where the flow leaves black "butterfly wings" surrounded by a large red ring. We show how the geometry of the lava lake, from which the gas is emitted, is responsible for significant asymmetry in the plume and for the shape of the red deposition ring by way of complicated gas-dynamic interactions between parts of the gas flow arising from different areas in the lava lake. We develop a model for gas flow in the immediate vicinity of the lava lake and use it to show that the behavior of ash particles of less than about 2 μm in diameter in the plume is insensitive to the details of how they are introduced into the flow because they are coupled to the gas at low altitudes. We simulate dust particles in the plume to show how particle size determines the distance from the lava lake at which particles deposit on the surface, and we use this dependence to find a size distribution of black dust particles in the plume that provides the best explanation for the observed black fans to the east and west of the lava lake. This best-fit particle size distribution suggests that there may be two distinct mechanisms of black dust creation at Pele, and when two log-normal distributions are fit to our results we obtain a mean particle diameter of 88 nm. We also propose a mechanism by which the condensible plume gas might overlay black dust in areas where black coloration is not observed and compare this to the observed overlaying of Pillanian dust by Pele's red ring.

  2. Charting thermal emission variability at Pele, Janus Patera and Kanehekili Fluctus with the Galileo NIMS Io Thermal Emission Database (NITED)

    NASA Astrophysics Data System (ADS)

    Davies, Ashley Gerard; Veeder, Glenn J.; Matson, Dennis L.; Johnson, Torrence V.

    2012-09-01

    Using the NIMS Io Thermal Emission Database (NITED), a collection of over 1000 measurements of radiant flux from Io’s volcanoes (Davies, A.G. et al. [2012]. Geophys. Res. Lett. 39, L01201. doi:10.1029/2011GL049999), we have examined the variability of thermal emission from three of Io’s volcanoes: Pele, Janus Patera and Kanehekili Fluctus. At Pele, the 5-μm thermal emission as derived from 28 night time observations is remarkably steady at 37 ± 10 GW μm-1, re-affirming previous analyses that suggested that Pele an active, rapidly overturning silicate lava lake. Janus Patera also exhibits relatively steady 5-μm thermal emission (≈20 ± 3 GW μm-1) in the four observations where Janus is resolved from nearby Kanehekili Fluctus. Janus Patera might contain a Pele-like lava lake with an effusion rate (QF) of ≈40-70 m3 s-1. It should be a prime target for a future mission to Io in order to obtain data to determine lava eruption temperature. Kanehekili Fluctus has a thermal emission spectrum that is indicative of the emplacement of lava flows with insulated crusts. Effusion rate at Kanehekili Fluctus dropped by an order of magnitude from ≈95 m3 s-1 in mid-1997 to ≈4 m3 s-1 in late 2001.

  3. Io: Eruptions at Pillan, and the time evolution of Pele and Pillan from 1996 to 2015

    NASA Astrophysics Data System (ADS)

    de Pater, Imke; Laver, Conor; Davies, Ashley Gerard; de Kleer, Katherine; Williams, David A.; Howell, Robert R.; Rathbun, Julie A.; Spencer, John R.

    2016-01-01

    Observations obtained with the near-infrared camera NIRC2, coupled to the adaptive optics system on the 10-m W.M. Keck II telescope on Mauna Kea, Hawaii, on 14 August 2007 revealed an active and highly-energetic eruption at Pillan at 245.2 ± 0.7°W and 8.5 ± 0.5°S. A one-temperature blackbody fit to the data revealed a (blackbody) temperature of 840 ± 40 K over an area of 17 km2, with a total power output of ∼500 GW. Using Davies' (Davies, A.G. [1996]. Icarus 124(1), 45-61) Io Flow Model, we find that the oldest lava present is less than 1-2 h old, having cooled down from the eruption temperature of >1400 K to ∼710 K; this young hot lava suggests that an episode of lava fountaining was underway. In addition to an examination of this eruption, we present data of the Pele and Pillan volcanoes obtained with the same instrument and telescope from 2002 through 2015. These data reveal another eruption at Pillan on UT 28 June 2010. Model fits to this eruption yield a blackbody temperature of 600-700 K over an area of ∼60 km2, radiating over 600 GW. On UT 18 February 2015 an energetic eruption was captured by the InfraRed Telescope Facility (IRTF) via mutual event occultations. The eruption took place at 242.7 ± 1°W and 12.4 ± 1°S, i.e., in the eastern part of Pillan Patera. Subsequent observations showed a gradual decrease in the intensity of the eruption. Images obtained with the Keck telescope on 31 March and 5 May 2015 revealed that the locations of the eruption had shifted by 120-160 km to the NW. In contrast to the episodicity of Pillan, Pele has been persistent, observed in every appropriate 4.7 μm observation. Pele was remarkably consistent in its thermal emission from the Galileo era through February 2002, when a blackbody temperature of 940 ± 40 K and an area of 6.5 km2 was measured. Since that time, however, the radiant flux from what is likely a apparently large, overturning lava lake has gradually subsided over the next decade by a factor of

  4. Synthesizing large-scale pyroclastic flows: Experimental design, scaling, and first results from PELE

    NASA Astrophysics Data System (ADS)

    Lube, G.; Breard, E. C. P.; Cronin, S. J.; Jones, J.

    2015-03-01

    Pyroclastic flow eruption large-scale experiment (PELE) is a large-scale facility for experimental studies of pyroclastic density currents (PDCs). It is used to generate high-energy currents involving 500-6500 m3 natural volcanic material and air that achieve velocities of 7-30 m s-1, flow thicknesses of 2-4.5 m, and runouts of >35 m. The experimental PDCs are synthesized by a controlled "eruption column collapse" of ash-lapilli suspensions onto an instrumented channel. The first set of experiments are documented here and used to elucidate the main flow regimes that influence PDC dynamic structure. Four phases are identified: (1) mixture acceleration during eruption column collapse, (2) column-slope impact, (3) PDC generation, and (4) ash cloud diffusion. The currents produced are fully turbulent flows and scale well to natural PDCs including small to large scales of turbulent transport. PELE is capable of generating short, pulsed, and sustained currents over periods of several tens of seconds, and dilute surge-like PDCs through to highly concentrated pyroclastic flow-like currents. The surge-like variants develop a basal <0.05 m thick regime of saltating/rolling particles and shifting sand waves, capped by a 2.5-4.5 m thick, turbulent suspension that grades upward to lower particle concentrations. Resulting deposits include stratified dunes, wavy and planar laminated beds, and thin ash cloud fall layers. Concentrated currents segregate into a dense basal underflow of <0.6 m thickness that remains aerated. This is capped by an upper ash cloud surge (1.5-3 m thick) with 100 to 10-4 vol % particles. Their deposits include stratified, massive, normally and reversely graded beds, lobate fronts, and laterally extensive veneer facies beyond channel margins.

  5. Olkiluoto 1 and 2 - Plant efficiency improvement and lifetime extension-project (PELE) implemented during outages 2010 and 2011

    SciTech Connect

    Kosonen, M.; Hakola, M.

    2012-07-01

    Teollisuuden Voima Oyj (TVO) is a non-listed public company founded in 1969 to produce electricity for its stakeholders. TVO is the operator of the Olkiluoto nuclear power plant. TVO follows the principle of continuous improvement in the operation and maintenance of the Olkiluoto plant units. The PELE project (Plant Efficiency Improvement and Lifetime Extension), mainly completed during the annual outages in 2010 and 2011, and forms one part of the systematic development of Olkiluoto units. TVO maintains a long-term development program that aims at systematically modernizing the plant unit systems and equipment based on the latest technology. According to the program, the Olkiluoto 1 and Olkiluoto 2 plant units are constantly renovated with the intention of keeping them safe and reliable, The aim of the modernization projects is to improve the safety, reliability, and performance of the plant units. PELE project at Olkiluoto 1 was done in 2010 and at Olkiluoto 2 in 2011. The outage length of Olkiluoto 1 was 26 d 12 h 4 min and Olkiluoto 2 outage length was 28 d 23 h 46 min. (Normal service-outage is about 14 days including refueling and refueling-outage length is about seven days. See figure 1) The PELE project consisted of several single projects collected into one for coordinated project management. Some of the main projects were as follows: - Low pressure turbines: rotor, stator vane, casing and turbine instrumentation replacement. - Replacement of Condenser Cooling Water (later called seawater pumps) pumps - Replacement of inner isolation valves on the main steam lines. - Generator and the generator cooling system replacement. - Low voltage switchgear replacement. This project will continue during future outages. PELE was a success. 100 TVO employees and 1500 subcontractor employees participated in the project. The execution of the PELE projects went extremely well during the outages. The replacement of the low pressure turbines and seawater pumps improved the

  6. No depth limit to hydrovolcanic limu o Pele: analysis of limu from Lō`ihi Seamount, Hawai`i

    NASA Astrophysics Data System (ADS)

    Schipper, C. Ian; White, James D. L.

    2010-03-01

    Deep-sea limu o Pele are shards of basaltic glass commonly described as “bubble walls.” When first identified they were inferred to form in submarine fire fountains, but were then reinterpreted as the products of hydrovolcanic volcanism, formed when submarine lava flows entrapped and vaporised seawater. Limu discovered below the c 3 km critical depth of seawater, where superheated water exists as a supercritical fluid instead of a vapour, led to the hydrovolcanic model of limu o Pele formation being discarded in favour of a magmatic CO2-driven, “strombolian-like” model. This revised magmatic mechanism has been widely accepted by the scientific community. We describe a newly discovered limu o Pele-rich deposit at ~1,052 mbsl on the northeast summit plateau region of Lō`ihi Seamount, Hawai`i. The limu at this site is concentrated in a chemically monomict ash lens interbedded with thin lava sheets that are separated from overlying volcaniclastic material by a discontinuity. The geometry and geochemistry of the deposit provide compelling evidence for a hydrovolcanic, sheet flow-related origin. The exceptional abundance and preservation of limu at this site allows 4 morphologic subtypes of limu- thin film, plateau-border, convex film, and Pele’s hair- to be identified and linked to portions of the isolated rupturing bubbles from which they are derived. We extend our discussion to beyond this new Lō`ihi deposit, by including a review of limu o Pele occurrences and thermodynamic considerations that demonstrate the hydrovolcanic model of limu formation to be more tenable than the magmatic model at all depths, including below the critical depth of seawater.

  7. Vapour dynamics during magma-water interaction experiments: hydromagmatic origins of submarine volcaniclastic particles (limu o Pele)

    NASA Astrophysics Data System (ADS)

    Schipper, C. Ian; Sonder, Ingo; Schmid, Andrea; White, James D. L.; Dürig, Tobias; Zimanowski, Bernd; Büttner, Ralf

    2013-03-01

    Recent observations have shattered the long-held theory that deep-sea (>500 m) explosive eruptions are impossible; however, determining the dynamics of unobserved eruptions requires interpretation of the deposits they produce. For accurate interpretation to be possible, the relative abilities of explosive magmatic degassing and non-explosive magma-water interaction to produce characteristic submarine volcaniclastic particles such as `limu o Pele' (bubble wall shards of glass) must be established. We experimentally address this problem by pouring remelted basalt (1300 °C, anhydrous) into a transparent, water-filled reservoir, recording the interaction with a high-speed video camera and applying existing heat transfer models. We performed the experiments under moderate to high degrees of water subcooling (˜8 l of water at 58 and 3 °C), with ˜0.1 to 0.15 kg of melt poured at ˜10-2 kg s-1. Videos show the non-explosive, hydromagmatic blowing and bursting of isolated melt bubbles to form limu o Pele particles that are indistinguishable from those found in submarine volcaniclastic deposits. Pool boiling around growing melt bubbles progresses from metastable vapour film insulation, through vapour film retraction/collapse, to direct melt-water contact. These stages are linked to the evolution of melt-water heat transfer to verify the inverse relationship between vapour film stability and the degree of water subcooling. The direct contact stage in particular explains the extremely rapid quench rates determined from glass relaxation speedometry for natural limu. Since our experimentally produced limu is made entirely by the entrapping of ambient water in degassed basaltic melt, we argue that the presence of fast-quenched limu o Pele in natural deposits is not diagnostic of volatile-driven explosive eruptions. This must be taken into account if submarine eruption dynamics are to be accurately inferred from the deposits and particles they produce.

  8. Morphology and Emplacement of the Muliwai a Pele Lava Channel, Mauna Ulu (Kilauea, Hawai'i)

    NASA Astrophysics Data System (ADS)

    Harris, A.; Rowland, S.

    2007-12-01

    The 5.6 km-long Muliwai a Pele lava channel formed during one of the last stages of Kilauea's 1969 - 1974 Mauna Ulu eruption, specifically during a fountaining event of May 29 - June 2, 1974. We have mapped the entire channel to define spatial and temporal variations in channel construction, and their influence on the final channel form. The levee sequence comprises a basal 'a'a unit covered by pahoehoe overflow units. Morphologically the channel can be split into five down-channel sections: (1) 0 - 1.1 km: Tubed - The channel initiates as a notch in Mauna Ulu's south wall. Along this section, a braided tube system has developed; its line marked by surface collapse depressions and skylights. (2) 1.1 - 3.1 km Proximal - Along this section the channel is 3 to 11 m wide (mean = 9 m), and 2 to 6 m deep (mean = 3 m). The mean depth compares with a mean flow thickness of 4 m. The channel floor comprises undrained lava within which a tube developed and locally collapsed. Channel overflows are dominated by thin (1 - 20 cm), smooth surfaced, vesicular (53 - 58 %), pahoehoe sheets. These are of limited extent, extending no more than a few 10's of meters from the channel, but were able to bury the basal 'a'a entirely. (3) 3.1 - 4.1 km Medial I - Along this section blockages become common, with 8 occurring within this 1 km distance. Blockages are composed of levee chunks plucked from the up-flow channel walls. They are porous so lava flowed through them as well as around them. Behind each blockage, relatively viscous and dense (40-48 % vesicles) lava became ponded. In places this overflowed to feed flows with spiny-pahoehoe-to-'a'a surfaces. (4) 4.1 - 5.1 km Medial II - Along this section surge-fed overflows evolve into denser (40 - 50 % vesicularity), more viscous-appearing surface forms. Overflows are no longer smooth, and instead have spiny textures that transition into localized 'a'a swirls. The drained channel depth (mean = 10 m) is deeper than the sequence thickness

  9. Schizophrenia: Do Sense Perceptions Correlate with Episodic Activity, as Indians Know Kokopelli/Pele Matches with Mother Earth's Electromagnetic Field Activity, EMF?

    NASA Astrophysics Data System (ADS)

    McCulley, Aspen; Pawa Matagamon, Sagamo; McLeod, David Matthew

    2007-10-01

    Certain Indian cognomens seem to indicate an environmental awareness of an electromagnetic wrath some traditional cultures are careful to acknowledge and accommodate. These include Pele/Kokopelli, Keitan, and Hobomock, that have carried explicit information our cultures have been cognizant of Mother Earth's not-always-benign influences. Let's consider schizophrenia, with or without a viral cofactor, and Kokopelli/Pele. She/he may be explicitly referenced as a hunch-backed, flute-playing individual, dancing-around in correlation with Earth's electromagnetic activities. Depending on the specific version and its details, individuals, particularly children, are admonished to avoid certain areas. Of especial importance and relevance may be cultural awareness that individuals, whom another type of culture has discriminated against, despite no a priori guilt, are explicitly absolved of culpability by the blanket statement that The Great Spirit is implicated in their behavior. Of course, this provides information of a religious sort, possibly corroborated by a currently prominent individual.

  10. Spatial, temporal, and dietary determinants of organic contaminants in nestling tree swallows in Point Pelee National Park, Ontario, Canada.

    PubMed

    Smits, Judit E G; Bortolotti, Gary R; Sebastian, Mary; Ciborowski, Jan J H

    2005-12-01

    Point Pelee National Park of Canada in southwestern Ontario, an important migratory route and vital breeding area for many birds, has localized areas of organochlorine (OC) pesticide contamination from agricultural production during the 1950s and 1960s. During 2001 and 2002, we investigated movement of persistent contaminants through the food web with the insectivorous tree swallow (Tachycineta bicolor) as a sentinel. The a priori site classifications, contaminated or reference, were based on soil residues of dichlorodiphenyltrichloroethane (DDT) and its breakdown products (sigmaDDT), dieldrin, and other OC pesticides. In 2001, all nestling tissue samples were pooled by site, and residue levels did not reflect the soil contaminant status. To improve sampling accuracy in 2002, tissue residues were determined from birds in individual nests. This showed OC pesticides to be higher in samples from contaminated sites compared with reference sites (p = 0.031). Polychlorinated biphenyls (PCBs), which were not detected in soil samples, were present in the nestlings and were not related to site of origin (p = 0.422). In 2002, dietary samples were collected from nestlings and identified to taxon, and representative insects collected from nesting sites were analyzed for PCBs and other OCs. Consumption of terrestrial prey was positively correlated with tissue residues of sigmaDDT (p = 0.006), whereas PCBs came from aquatic prey, Hexagenia mayflies (p = 0.003). Dietary details proved valuable in this study of contaminant transfer in insectivorous vertebrates. PMID:16445099

  11. The formation of filamentary structures from molten silicates: Peleʼs hair, angel hair, and blown clinker

    NASA Astrophysics Data System (ADS)

    Villermaux, Emmanuel

    2012-08-01

    We conduct an analysis of the concomitant, competing phenomena at play in the formation of long filamentary structures from a stream of hot, very viscous and cohesive liquid as it is blown by a fast, cool air stream. The situation is relevant to a broad class of problems, namely volcanic glass threads or fibers formed when small particles of molten material are thrown into the air and spun out by the wind into long hair-like strands (called Pele's hair), to the process of prilling, the manufacture of glass fibers, and the formation of coke in furnaces and combustion chambers. The air stream blowing on the molten material both breaks up the liquid into fragments stabilized by capillarity, and cools the liquid down to solidification. There are, in this problem, four characteristic times. First, a deformation time of the liquid masses, setting the rate at which drops elongate into ligaments. Then, two timescales set the time of capillary breakup of these ligaments, one prevailing on the other depending on the relative weight of inertia on viscous slowing (that point is illustrated by an original experiment). Finally, a solidification time of the ligaments. Thin solid strands will only form when solidification occurs before capillary breakup. We have discovered that this condition is likely to apply when the liquid is strongly viscous, as for clinker in the cement industry, considered here as a generic example. We formulate recommendations to remove (or enhance) the formation of these objects.

  12. A fonte ionizante do disco de acreção no núcleo de NGC1097

    NASA Astrophysics Data System (ADS)

    Silva, R. N.; Storchi-Bergmann, T.

    2003-08-01

    Observações em raios-X revelam o "coração" dos núcleos ativos de galáxias, pois esse tipo de radiação provém das suas regiões mais internas, próximas ao buraco negro central. Neste trabalho apresentamos observações em raios-X da região central da galáxia NGC1097, que hospeda um buraco negro supermassivo e um disco de acreção cuja emissão vem sendo observada há dez anos através da linha de emissão Ha larga (10000 km/s) e de duplo pico. As observações em raios-X - que foram obtidas com o Telescópio Chandra - foram combinadas com observações no ultravioleta obtidas com o Telescópio Espacial Hubble e são usadas para estudar as características da fonte central que ioniza o disco de acreção. A distribuição espectral de energia é comparada com a predita por modelos, em particular o de uma estrutura "ADAF" ("advection dominated accretion flow") na parte interna do disco. Tal estrutura produz um espectro de emissão de linhas estreitas tipo LINER, como observado em NGC1097 e em rádio-galáxias que apresentam linhas de Balmer largas de duplo pico. Apresentamos também uma comparação entre outros LINERs com linhas de emissão largas de duplo pico, disponíveis na literatura ou nos arquivos do Chandra e do Telescópio Espacial Hubble e discutimos as correspondentes implicações para modelos da fonte central.

  13. Condições físicas em galáxias HII

    NASA Astrophysics Data System (ADS)

    Kehrig, C.; Telles, E.; Cuisinier, F.

    2003-08-01

    Galáxias HII são galáxias anãs de baixa luminosidade que apresentam alta taxa de formação estelar. Seus espectros são dominados por intensas linhas de emissão devido à fotoionização pela presença de um grande número de estrelas do tipo O e B. Nós apresentamos um catálogo espectrofotométrico de 111 galáxias HII observadas no telescópio 1.52m do ESO com o espectrógrafo Boller & Chivens. Determinamos propriedades estatísticas da amostra e derivamos condições físicas (temperatura eletrônica, densidade eletrônica) e abundâncias químicas. Para algumas galáxias, fomos também capazes de resolver espacialmente regiões de formação estelar individuais e determinar propriedades espectroscópicas para estas regiões separadamente, o que nos permitiu avaliar as flutuações das condições físico-químicas dentro das galáxias HII. Em particular, vimos que apesar das galáxias HII apresentarem formação estelar espalhada ao longo do corpo da galáxia, são objetos quimicamente homogêneos. A fim de estudar a evolução temporal dos objetos durante o tempo de vida das estrelas ionizantes construimos também alguns diagramas relacionando razões de linhas de emissão com a largura equivalente de Hb (EW(Hb)). Para interpretar tais diagramas utilizamos modelos de fotoionização para populações estelares integradas. Concluímos que as galáxias HII não correspondem a simples idéia de um burst instantâneo envolvido por um gás opaco aos fótons ionizantes e com densidade constante. As relações observadas entre razões de linhas e EW(Hb) podem ser melhor compreendidas se as galáxias HII apresentarem populações estelares mais velhas, que contribuem para o contínuo óptico observado.

  14. Time Evolution of Io’s volcanoes Pele and Pillan from 1996 - 2015, as derived from Galileo NIMS, Keck, Gemini, IRTF, and LBTI observations

    NASA Astrophysics Data System (ADS)

    de Pater, Imke

    2015-11-01

    We present highlights of our observations of Pele and Pillan on Io, and a multi-decade timeline of thermal emission intensities in both regions. Io was regularly observed by Galileo NIMS during 1996-2001. Since 2001 the satellite has been imaged semi-regularly with NIRC2, coupled to an adaptive optics system, on the 10-m Keck telescope. In 1997, Galileo NIMS observed a large and highly-variable eruption close to Pillan Mons; this eruption lasted several months [1]. Since that time no eruptions had been seen (but time coverage was scarce), until our Keck images on 14 August 2007 revealed an active and highly-energetic eruption at a location close to that of the 1997 eruptions. A one-temperature blackbody fit to the data revealed a (blackbody) temperature of 840 ± 40 K over an area of 17 km2, with a total power output of ~500 GW. Using Davies’ (1996) Io Flow Model [2] we find that the oldest lava present is less than 1-2 hours old, having cooled down from the eruption temperature of >1400 K to ~710 K. This young, hot lava suggests that an episode of lava fountaining was underway. Since 2007, several eruptions have been seen in the Pillan region. The 18 February 2015 eruption was discovered during a mutual occultation event with the NASA IRTF. This event was (serendipitously) subsequently imaged with the Large Binocular Telescope Interferometer (LBTI) on 8 March 2015 during a mutual event occultation, and again with the IRTF on 15 March. The site was imaged with the Keck and Gemini-N telescopes between 27 March and May 5, during which time the intensity gradually decreased. Interestingly, the precise location of the eruption had shifted to the north-west from Pillan Patera, where the initial (18 Feb) eruption had taken place. In contrast to the episodicity of Pillan, Pele has been remarkably consistent in its thermal emission during the Galileo era [1] through February 2002, when a blackbody temperature of 940 ± 40 K and an area of 6.5 km2 was measured. Since that

  15. Perfis de temperatura eletrônica em regiões HII

    NASA Astrophysics Data System (ADS)

    Copetti, M. V. F.

    2003-08-01

    As flutuações de temperatura eletrônica em regiões HII, inicialmente propostas para explicar as discrepâncias entre os valores de temperatura obtidos por diferentes métodos, têm sido apontadas como a causa mais provável das enormes diferenças encontradas entre as abundâncias químicas medidas através de linhas excitadas colisionalmente e de linhas de recombinação. Recentemente têm sido reportadas tentativas de detecção e quantificação diretas das flutuações de temperatura eletrônica através de medidas ponto a ponto, obtidas por meio de espectroscopia de fenda longa, das razões de linhas [OIII]l4263/l5007 e [NII]l5755/l6584, principais sensores de temperatura. Neste trabalho, utilizamos o código numérico de fotoionização Cloudy para avaliar a confiabilidade desse procedimento. Concluímos que, para valores de densidade eletrônica e de temperatura efetiva da estrela ionizante típicos das regiões HII, os perfis superficiais de temperatura obtidos via medidas do sensor [OIII]l4263/l5007 são bons traçadores dos gradientes internos de temperatura eletrônica. Já os perfis de temperatura eletrônica medidos por meio da razão [NII]l5755/l6584 não reproduzem os gradientes verdadeiros de temperatura.

  16. The past 5,000 years of volcanic activity at Mt. Pelee martinique (F.W.I.): Implications for assessment of volcanic hazards

    NASA Astrophysics Data System (ADS)

    Westercamp, D.; Traineau, H.

    1983-09-01

    The history of Mt. Pelée, Martinique, was subdivided into three stages based on field geology and 14C data. The two first stages constructed an ancient Mt. Pelée and an intermediate cone between 0.4 m.y and 19,500 y.b.p. The third (or present) stage started 13,500 years ago, after a repose of 6,000 years. This paper focuses on the activity of Mt. Pelée during the past 5,000 years as a means to assess and zone volcanic hazards of the 23 magmatic eruptions during the past 5,000 years. The ages of 21 eruptions of this period are based on 75 new 14C dates. The types of phenomena and distribution of pyroclasts relate to four main types of activity: — The first type consists of pumice-and-ash flows that are not preceded by a Plinian fall. Two eruptions (named P6 and P4) illustrate this type, for which the mixture of gas, ash, and pumice simply overflow the vent and flood several valleys. — The second type differs from the first by the occurrence of a preliminary moderate Plinian-fall stage. Four eruptions (P5, P31, P2 and P1) illustrate this type. Two eruptions (P3 2 and P3 3) experienced cataclysmic Plinian explosions and pumiceous surges. — The third type is related to dome growth with the rise of viscous spines and the production of related block-and-ash flows. Five eruptions (1929, Sept. 1902-1904, NPM, NAB 2 and NMP) illustrate this type. — The fourth type is characterized by violent ejection of more-or-less heterogeneous nuées ardentes. The direction of the blast, dictated by the morphology of the crater, has been towards the south several times at Mt. Pelee. Four eruptions (May 1902, NAB1, NRP2 and NRP3) belong to this type. Future magmatic eruptions at Mt. Pelée will very likely belong to one of these four types. Assessment of hazards at Mt. Pelée is based upon the behavior of the volcano during the past 5,000 years because: (1) recognition of past magmatic eruptions is quite complete and well-dated, and (2) no structural change has occurred in the

  17. EM International. Volume 1

    SciTech Connect

    Not Available

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  18. emGain: Determination of EM gain of CCD

    NASA Astrophysics Data System (ADS)

    Daigle, Olivier; Carignan, Claude; Blais-Ouellette, Sebastien

    2012-01-01

    The determination of the EM gain of the CCD is best done by fitting the histogram of many low-light frames. Typically, the dark+CIC noise of a 30ms frame itself is a sufficient amount of signal to determine accurately the EM gain with about 200 512x512 frames. The IDL code emGain takes as an input a cube of frames and fit the histogram of all the pixels with the EM stage output probability function. The function returns the EM gain of the frames as well as the read-out noise and the mean signal level of the frames.

  19. The EM Earthquake Precursor

    NASA Astrophysics Data System (ADS)

    Jones, K. B., II; Saxton, P. T.

    2013-12-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After the 1989 Loma Prieta Earthquake, American earthquake investigators predetermined magnetometer use and a minimum earthquake magnitude necessary for EM detection. This action was set in motion, due to the extensive damage incurred and public outrage concerning earthquake forecasting; however, the magnetometers employed, grounded or buried, are completely subject to static and electric fields and have yet to correlate to an identifiable precursor. Secondly, there is neither a networked array for finding any epicentral locations, nor have there been any attempts to find even one. This methodology needs dismissal, because it is overly complicated, subject to continuous change, and provides no response time. As for the minimum magnitude threshold, which was set at M5, this is simply higher than what modern technological advances have gained. Detection can now be achieved at approximately M1, which greatly improves forecasting chances. A propagating precursor has now been detected in both the field and laboratory. Field antenna testing conducted outside the NE Texas town of Timpson in February, 2013, detected three strong EM sources along with numerous weaker signals. The antenna had mobility, and observations were noted for recurrence, duration, and frequency response. Next, two

  20. Bioterrorism awareness for EMS.

    PubMed

    Patrick, Richard W

    2004-04-01

    It is important to understand that the issues surrounding bioterrorism and all weapons of mass destruction are complex. In an effort to enhance response to such events, EMS should handle all incidents from the perspective of an all-hazards approach. Prevention, preparation, response and recovery are essential to the safe mitigation of all incidents. Organizations must be prepared. Plan now for a safer tomorrow. Your personnel and communities depend on you. PMID:15131906

  1. Identified EM Earthquake Precursors

    NASA Astrophysics Data System (ADS)

    Jones, Kenneth, II; Saxton, Patrick

    2014-05-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After a number of custom rock experiments, two hypotheses were formed which could answer the EM wave model. The first hypothesis concerned a sufficient and continuous electron movement either by surface or penetrative flow, and the second regarded a novel approach to radio transmission. Electron flow along fracture surfaces was determined to be inadequate in creating strong EM fields, because rock has a very high electrical resistance making it a high quality insulator. Penetrative flow could not be corroborated as well, because it was discovered that rock was absorbing and confining electrons to a very thin skin depth. Radio wave transmission and detection worked with every single test administered. This hypothesis was reviewed for propagating, long-wave generation with sufficient amplitude, and the capability of penetrating solid rock. Additionally, fracture spaces, either air or ion-filled, can facilitate this concept from great depths and allow for surficial detection. A few propagating precursor signals have been detected in the field occurring with associated phases using custom-built loop antennae. Field testing was conducted in Southern California from 2006-2011, and outside the NE Texas town of Timpson in February, 2013. The antennae have mobility and observations were noted for

  2. EPA LABORATORIES IMPLEMENT EMS PROGRAM

    EPA Science Inventory

    This paper highlights the breadth and magnitude of carrying out an effective Environmental Management System (EMS) program at the U.S. EPA's research and development laboratories. Federal research laboratories have unique operating challenges compared to more centralized industr...

  3. Is EMS communicating with the FCC?

    PubMed

    Johnson, M S; VanCott, C; Glass, C; Anderson, P B

    1989-07-01

    Radio communication problems in EMS run the spectrum from annoying to deadly. Dedicated radio frequencies for EMS, much like those exclusive to police and fire departments, are long overdue. PMID:10293680

  4. Alveolar Echinococcosis: Characterization of Diagnostic Antigen Em18 and Serological Evaluation of Recombinant Em18

    PubMed Central

    Sako, Yasuhito; Nakao, Minoru; Nakaya, Kazuhiro; Yamasaki, Hiroshi; Gottstein, Bruno; Lightowers, Marshall W.; Schantz, Peter M.; Ito, Akira

    2002-01-01

    The Echinococcus multilocularis protein Em18 is one of the most promising antigens for use in serodiagnosis of alveolar echinococcosis in human patients. Here we identify an antigenic relationship between Em18 and a 65-kDa immunodominant E. multilocularis surface protein previously identified as either EM10 or EmII/3. The NH2-terminal sequence of native Em18 was determined, revealing it to be a fragment of EM10. Experiments were undertaken to investigate the effect of proteinase inhibitors on the degradation of EM10 in crude extracts of E. multilocularis protoscoleces. Em18 was found to be the product of degradation of EM10 by cysteine proteinase. A recombinant Em18 (RecEm18, derived from 349K to 508K of EM10) was successfully expressed by using Escherichia coli expression system and then evaluated for use in serodiagnosis of alveolar echinococcosis. RecEm18 was recognized by 27 (87.1%) and 28 (90.3%) of 31 serum samples from clinically and/or pathologically confirmed alveolar echinococcosis patients by enzyme-linked immunosorbent assay and immunoblotting, respectively. Of 33 serum samples from cystic echinococcosis patients, 1 was recorded as having a weak positive reaction to RecEm18; however, none of the serum samples which were tested from neurocysticercosis patients (n = 10) or healthy people (n = 15) showed positive reactions. RecEm18 has the potential for use in the differential serodiagnosis of alveolar echinococcosis. PMID:12149326

  5. The European Mobile System (EMS)

    NASA Technical Reports Server (NTRS)

    Jongejans, A.; Rogard, R.; Mistretta, I.; Ananasso, F.

    1993-01-01

    The European Space Agency is presently procuring an L band payload in order to promote a regional European L band system coping with the specific needs of the European market. The payload, and the two communications systems to be supported, are described below. The potential market for EMS in Europe is discussed.

  6. DOE/EM Criticality Safety Needs Assessment

    SciTech Connect

    Westfall, Robert Michael; Hopper, Calvin Mitchell

    2011-02-01

    The issue of nuclear criticality safety (NCS) in Department of Energy Environmental Management (DOE/EM) fissionable material operations presents challenges because of the large quantities of material present in the facilities and equipment that are committed to storage and/or material conditioning and dispositioning processes. Given the uncertainty associated with the material and conditions for many DOE/EM fissionable material operations, ensuring safety while maintaining operational efficiency requires the application of the most-effective criticality safety practices. In turn, more-efficient implementation of these practices can be achieved if the best NCS technologies are utilized. In 2002, DOE/EM-1 commissioned a survey of criticality safety technical needs at the major EM sites. These needs were documented in the report Analysis of Nuclear Criticality Safety Technology Supporting the Environmental Management Program, issued May 2002. Subsequent to this study, EM safety management personnel made a commitment to applying the best and latest criticality safety technology, as described by the DOE Nuclear Criticality Safety Program (NCSP). Over the past 7 years, this commitment has enabled the transfer of several new technologies to EM operations. In 2008, it was decided to broaden the basis of the EM NCS needs assessment to include not only current needs for technologies but also NCS operational areas with potential for improvements in controls, analysis, and regulations. A series of NCS workshops has been conducted over the past years, and needs have been identified and addressed by EM staff and contractor personnel. These workshops were organized and conducted by the EM Criticality Safety Program Manager with administrative and technical support by staff at Oak Ridge National Laboratory (ORNL). This report records the progress made in identifying the needs, determining the approaches for addressing these needs, and assimilating new NCS technologies into EM

  7. School Budget Hold'em Facilitator's Guide

    ERIC Educational Resources Information Center

    Education Resource Strategies, 2012

    2012-01-01

    "School Budget Hold'em" is a game designed to help school districts rethink their budgeting process. It evolved out of Education Resource Strategies' (ERS) experience working with large urban districts around the country. "School Budget Hold'em" offers a completely new approach--one that can turn the budgeting process into a long-term visioning…

  8. View of Spacelab engineering Model (EM)

    NASA Technical Reports Server (NTRS)

    1981-01-01

    View of Spacelab engineering Model (EM) as it is being brought in the O and C bldg at Kenndey Space Center (27464); view of the EM as it is being offloaded from the C-54 aircraft. Kennedy Space Center alternative photo number is 108-KSC-80-OC-666 (27465); model taken out to launch pad (27466).

  9. EM international activities. February 1997 highlights

    SciTech Connect

    1997-02-01

    EM International Highlights is a brief summary of on-going international projects within the Department of Energy`s Office of Environmental Management (EM). This document contains sections on: Global Issues, activities in Western Europe, activities in central and Eastern Europe, activities in Russia, activities in Asia and the Pacific Rim, activities in South America, activities in North America, and International Organizations.

  10. EM International, July 1994, Volume 2

    SciTech Connect

    Not Available

    1994-10-01

    The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM`s mandate to protect public health and the environment through the safe and cost-effective remediation of the Department`s nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM`s objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities.

  11. Unified Data Resource for CryoEM

    PubMed Central

    Lawson, Catherine L.

    2010-01-01

    3D cryo-electron microscopy reconstruction methods are uniquely able to reveal structures of many important macromolecules and macromolecular complexes. EMDataBank.org, a joint effort of the Protein Data Bank in Europe (PDBe), the Research Collaboratory for Structural Bioinformatics (RCSB), and the National Center for Macromolecular Imaging (NCMI), is a “one-stop shop” resource for global deposition and retrieval of cryoEM map, model and associated metadata. The resource unifies public access to the two major EM Structural Data archives: EM Data Bank (EMDB) and Protein Data Bank (PDB), and facilitates use of EM structural data of macromolecules and macromolecular complexes by the wider scientific community. PMID:20888470

  12. Many factors complicate EM susceptibility tests

    NASA Astrophysics Data System (ADS)

    Richards, R. J.

    1982-09-01

    Procedures and apparatus currently employed for assaying the EM susceptibility of communication, navigation, and EW equipment are described. Susceptibility is examined in either conducted susceptibility tests, where signals are introduced into the input port of the device under test, or in radiated modes, where the entire device is exposed to an EM field to test for component and system failure. Noting that military standards require up to 10 times the EM resistance as commercial standards, the use of shielded enclosures in both commercial and military testing facilities is explored. RF-tight enclosures are filled with a homogeneous EM field produced by, optimally, broadband generators which emit signals which are amplified to desired levels. Sweep functions permit testing under broadband conditions. Attention is given to radiator selection and antenna choice to produce satisfactory test conditions at all frequencies.

  13. EMS in Taiwan: past, present, and future.

    PubMed

    Chiang, Wen-Chu; Ko, Patrick Chow-In; Wang, Hui-Chih; Yang, Chi-Wei; Shih, Fuh-Yuan; Hsiung, Kuang-Hua; Ma, Matthew Huei-Ming

    2009-01-01

    Taiwan is a small island country located in East Asia. From around 1995 modern concepts of the EMS were imported and supported by legislation. Considerable progress has since been made towards the construction of an effective pre-hospital care system. This article introduces the current status of the EMS in Taiwan, including the systems, response configurations, funding, personnel, medical directorship, and outcome research. The features and problems of in-hospital emergency care are also discussed. Key areas for further development in the country vary depending on regional differences in available resource and population density. An analysis of the strength, weakness, opportunity, and threats of the evolving EMS in Taiwan could be an example for other countries where the EMS is undergoing a similar process of development and optimisation. PMID:19059690

  14. EMS adaptation for climate change

    NASA Astrophysics Data System (ADS)

    Pan, C.; Chang, Y.; Wen, J.; Tsai, M.

    2010-12-01

    The purpose of this study was to find an appropriate scenario of pre-hospital transportation of an emergency medical service (EMS) system for burdensome casualties resulting from extreme climate events. A case of natural catastrophic events in Taiwan, 88 wind-caused disasters, was reviewed and analyzed. A sequential-conveyance method was designed to shorten the casualty transportation time and to promote the efficiency of ambulance services. A proposed mobile emergency medical center was first constructed in a safe area, but nearby the disaster area. The Center consists of professional medical personnel who process the triage of incoming patients and take care of casualties with minor injuries. Ambulances in the Center were ready to sequentially convey the casualties with severer conditions to an assigned hospital that is distant from the disaster area for further treatment. The study suggests that if we could construct a spacious and well-equipped mobile emergency medical center, only a small portion of casualties would need to be transferred to distant hospitals. This would reduce the over-crowding problem in hospital ERs. First-line ambulances only reciprocated between the mobile emergency medical center and the disaster area, saving time and shortening the working distances. Second-line ambulances were highly regulated between the mobile emergency medical center and requested hospitals. The ambulance service of the sequential-conveyance method was found to be more efficient than the conventional method and was concluded to be more profitable and reasonable on paper in adapting to climate change. Therefore, additional practical work should be launched to collect more precise quantitative data.

  15. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  16. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  17. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  18. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  19. 10 CFR Appendixes E-M to Part 52 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false E Appendixes E-M to Part 52 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES, CERTIFICATIONS, AND APPROVALS FOR NUCLEAR POWER PLANTS Appendixes E-M to Part 52...

  20. Processing of Cryo-EM Movie Data.

    PubMed

    Ripstein, Z A; Rubinstein, J L

    2016-01-01

    Direct detector device (DDD) cameras dramatically enhance the capabilities of electron cryomicroscopy (cryo-EM) due to their improved detective quantum efficiency (DQE) relative to other detectors. DDDs use semiconductor technology that allows micrographs to be recorded as movies rather than integrated individual exposures. Movies from DDDs improve cryo-EM in another, more surprising, way. DDD movies revealed beam-induced specimen movement as a major source of image degradation and provide a way to partially correct the problem by aligning frames or regions of frames to account for this specimen movement. In this chapter, we use a self-consistent mathematical notation to explain, compare, and contrast several of the most popular existing algorithms for computationally correcting specimen movement in DDD movies. We conclude by discussing future developments in algorithms for processing DDD movies that would extend the capabilities of cryo-EM even further. PMID:27572725

  1. Risk Communication Within the EM Program

    SciTech Connect

    Edelson, M.

    2003-02-26

    The U.S. Department of Energy Environmental Management program (EM) conducts the most extensive environmental remediation effort in the world. The annual EM budgets have exceeded $6,000,000,000 for approximately ten years and EM has assumed responsibility for the cleanup of the largest DOE reservations (i.e., at Hanford, Washington, Aiken, South Carolina, and Idaho Falls, Idaho) as well as the facilities at Rocky Flats, Colorado and in Ohio. Each of these sites has areas of extensive radioactive and chemical contamination, numerous surplus facilities that require decontamination and removal, while some have special nuclear material that requires secure storage. The EM program has been criticized for being ineffective (1) and has been repeatedly reorganized to address perceived shortcomings. The most recent reorganization was announced in 2001 to become effective at the beginning of the 2003 Federal Fiscal Year (i.e., October 2002). It was preceded by a ''top to bottom'' review (TTBR) of the program (2) that identified several deficiencies that were to be corrected as a result of the reorganization. One prominent outcome of the TTBR was the identification of ''risk reduction'' as an organizing principle to prioritize the activities of the new EM program. The new program also sought to accelerate progress by identifying a set of critical activities at each site that could be accelerated and result in more rapid site closure, with attendant risk, cost, and schedule benefits. This paper investigates how the new emphasis on risk reduction in the EM program has been communicated to EM stakeholders and regulators. It focuses on the Rocky Flats Environmental Technology Site (RFETS) as a case study and finds that there is little evidence for a new emphasis on risk reduction in EM communications with RFETS stakeholders. Discussions between DOE and RFETS stakeholders often refer to ''risk,'' but the word serves as a placeholder for other concepts. Thus ''risk'' communication

  2. Do earthquakes generate EM signals?

    NASA Astrophysics Data System (ADS)

    Walter, Christina; Onacha, Stephen; Malin, Peter; Shalev, Eylon; Lucas, Alan

    2010-05-01

    study areas, large swarms of earthquakes were located very close to the electromagnetic coils. This abstract focuses on the data from the Wairakei area. Preliminary data analysis has been carried out by band pass filtering and removing of the harmonics of the 50 Hz power line frequency. The initial results clearly show that electromagnetic signals accompany the seismic P and S waves (coseismic signal). Further data analysis involves the extraction of the seismoelectric signal generated at the onset of the earthquake and at interfaces from the coseismic signal and other ‘noise' sources. This processing step exhibits a major challenge in seismoelectric data processing. Unlike in other studies we measured the EM field and the seismic field at one location. Therefore the seismoelectric wave travelling at the speed of light cannot be determined as easily in the arrival times as when an array of coils is used. This makes the determination of the origin time much more difficult. Hence other processing techniques need to be explored.

  3. The E-MS Algorithm: Model Selection with Incomplete Data

    PubMed Central

    Jiang, Jiming; Nguyen, Thuan; Rao, J. Sunil

    2014-01-01

    We propose a procedure associated with the idea of the E-M algorithm for model selection in the presence of missing data. The idea extends the concept of parameters to include both the model and the parameters under the model, and thus allows the model to be part of the E-M iterations. We develop the procedure, known as the E-MS algorithm, under the assumption that the class of candidate models is finite. Some special cases of the procedure are considered, including E-MS with the generalized information criteria (GIC), and E-MS with the adaptive fence (AF; Jiang et al. 2008). We prove numerical convergence of the E-MS algorithm as well as consistency in model selection of the limiting model of the E-MS convergence, for E-MS with GIC and E-MS with AF. We study the impact on model selection of different missing data mechanisms. Furthermore, we carry out extensive simulation studies on the finite-sample performance of the E-MS with comparisons to other procedures. The methodology is also illustrated on a real data analysis involving QTL mapping for an agricultural study on barley grains. PMID:26783375

  4. Percutaneous absorption and disposition of Tinopal EMS.

    PubMed

    Black, J G; Moule, R C; Philp, J

    1977-08-01

    A cotton-substantive, anionic, fluorescent whitening agent manufactured by several suppliers under various trade names e.g. Tinopal EMS, has been synthesized in radioactive form. Intubation of detergent or aqueous solution into rats resulted in little absorption from the intestinal tract as evidenced by low radioactivity in the urine and tissues. Most of the dose was excreted rapidly in the faeces. After parenteral administration to rats, the radioactivity was rapidly excreted in the faeces with small amounts remaining in tissues and organs. There was slight evidence of retention of radioactivity in the kidneys. Very small amounts of Tinopal EMS in detergent were absorbed through rat skin, but only when concentrations greater than those normally used by the consumer, together with occlusion of the skin were employed. Small amounts were absorbed throught skin when applied in ethanol. It is concluded that the possibility of systemic toxic effects in man as a result of percutaneous absorption is remote. PMID:929616

  5. Crosshole EM in steel-cased boreholes

    SciTech Connect

    Wilt, M.; Lee, K.H.; Becker, A.; Spies, B.; Wang, B.

    1996-07-01

    The application of crosshole EM methods through steel well-casing was investigated in theoretical, laboratory and field studies. A numerical code was developed that calculates the attenuation and phase delay of an EM dipole signal propagated through a steel well casing lodged in a homogeneous medium. The code was validated with a scale model and used for sensitivity studies of casing and formation properties. Finally, field measurements were made in an oil field undergoing waterflooding. Our most important findings are that (1) crosshole surveys are feasible using a well pair with one metallic and one non-metallic casing. (2) The casing effect seems be localized within the pipe section that includes the sensor. (3) The effects of the casing can be corrected using simple means and (4) crosshole field data that are sensitive to both formation and casing were acquired in a working environment.

  6. TandEM: Titan and Enceladus mission

    USGS Publications Warehouse

    Coustenis, A.; Atreya, S.K.; Balint, T.; Brown, R.H.; Dougherty, M.K.; Ferri, F.; Fulchignoni, M.; Gautier, D.; Gowen, R.A.; Griffith, C.A.; Gurvits, L.I.; Jaumann, R.; Langevin, Y.; Leese, M.R.; Lunine, J.I.; McKay, C.P.; Moussas, X.; Muller-Wodarg, I.; Neubauer, F.; Owen, T.C.; Raulin, F.; Sittler, E.C.; Sohl, F.; Sotin, C.; Tobie, G.; Tokano, T.; Turtle, E.P.; Wahlund, J.-E.; Waite, J.H.; Baines, K.H.; Blamont, J.; Coates, A.J.; Dandouras, I.; Krimigis, T.; Lellouch, E.; Lorenz, R.D.; Morse, A.; Porco, C.C.; Hirtzig, M.; Saur, J.; Spilker, T.; Zarnecki, J.C.; Choi, E.; Achilleos, N.; Amils, R.; Annan, P.; Atkinson, D.H.; Benilan, Y.; Bertucci, C.; Bezard, B.; Bjoraker, G.L.; Blanc, M.; Boireau, L.; Bouman, J.; Cabane, M.; Capria, M.T.; Chassefiere, E.; Coll, P.; Combes, M.; Cooper, J.F.; Coradini, A.; Crary, F.; Cravens, T.; Daglis, I.A.; de Angelis, E.; De Bergh, C.; de Pater, I.; Dunford, C.; Durry, G.; Dutuit, O.; Fairbrother, D.; Flasar, F.M.; Fortes, A.D.; Frampton, R.; Fujimoto, M.; Galand, M.; Grasset, O.; Grott, M.; Haltigin, T.; Herique, A.; Hersant, F.; Hussmann, H.; Ip, W.; Johnson, R.; Kallio, E.; Kempf, S.; Knapmeyer, M.; Kofman, W.; Koop, R.; Kostiuk, T.; Krupp, N.; Kuppers, M.; Lammer, H.; Lara, L.-M.; Lavvas, P.; Le, Mouelic S.; Lebonnois, S.; Ledvina, S.; Li, J.; Livengood, T.A.; Lopes, R.M.; Lopez-Moreno, J. -J.; Luz, D.; Mahaffy, P.R.; Mall, U.; Martinez-Frias, J.; Marty, B.; McCord, T.; Salvan, C.M.; Milillo, A.; Mitchell, D.G.; Modolo, R.; Mousis, O.; Nakamura, M.; Neish, C.D.; Nixon, C.A.; Mvondo, D.N.; Orton, G.; Paetzold, M.; Pitman, J.; Pogrebenko, S.; Pollard, W.; Prieto-Ballesteros, O.; Rannou, P.; Reh, K.; Richter, L.; Robb, F.T.; Rodrigo, R.; Rodriguez, S.; Romani, P.; Bermejo, M.R.; Sarris, E.T.; Schenk, P.; Schmitt, B.; Schmitz, N.; Schulze-Makuch, D.; Schwingenschuh, K.; Selig, A.; Sicardy, B.; Soderblom, L.; Spilker, L.J.; Stam, D.; Steele, A.; Stephan, K.; Strobel, D.F.; Szego, K.; Szopa

    2009-01-01

    TandEM was proposed as an L-class (large) mission in response to ESA's Cosmic Vision 2015-2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini-Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini-Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (Montgolfi??re) and possibly several landing probes to be delivered through the atmosphere. ?? Springer Science + Business Media B.V. 2008.

  7. Helicopter EMS: Research Endpoints and Potential Benefits

    PubMed Central

    Thomas, Stephen H.; Arthur, Annette O.

    2012-01-01

    Patients, EMS systems, and healthcare regions benefit from Helicopter EMS (HEMS) utilization. This article discusses these benefits in terms of specific endpoints utilized in research projects. The endpoint of interest, be it primary, secondary, or surrogate, is important to understand in the deployment of HEMS resources or in planning further HEMS outcomes research. The most important outcomes are those which show potential benefits to the patients, such as functional survival, pain relief, and earlier ALS care. Case reports are also important “outcomes” publications. The benefits of HEMS in the rural setting is the ability to provide timely access to Level I or Level II trauma centers and in nontrauma, interfacility transport of cardiac, stroke, and even sepsis patients. Many HEMS crews have pharmacologic and procedural capabilities that bring a different level of care to a trauma scene or small referring hospital, especially in the rural setting. Regional healthcare and EMS system's benefit from HEMS by their capability to extend the advanced level of care throughout a region, provide a “backup” for areas with limited ALS coverage, minimize transport times, make available direct transport to specialized centers, and offer flexibility of transport in overloaded hospital systems. PMID:22203905

  8. Test beam performance of CDF plug upgrade EM calorimeter

    SciTech Connect

    Fukui, Y.; CDF Upgrade Group

    1998-01-01

    CDF Plug Upgrade(tile-fiber) EM Calorimeter performed resolution of 15%/{radical}E{circle_plus}0.7% with non-linearity less than 1% in a energy range of 5-180 GeV at Fermilab Test Beam. Transverse uniformity of inside-tower-response of the EM Calorimeter was 2.2% with 56 GeV positron, which was reduced to 1.0% with response map correction. We observed 300 photo electron/GeV in the EM Calorimeter. Ratios of EM Calorimeter response to positron beam to that to {sup 137}Cs Source was stable within 1% in the period of 8 months.

  9. 2. HI PAR (ACQUISITION RADAR) TOWER AND ENLISTED MEN (EM) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. HI PAR (ACQUISITION RADAR) TOWER AND ENLISTED MEN (EM) BARRACKS WITH RADAR ATTACHED. - Nike Hercules Missile Battery Summit Site, Battery Control Administration & Barracks Building, Anchorage, Anchorage, AK

  10. Communication - An Effective Tool for Implementing ISO 14001/EMS

    SciTech Connect

    Rachel Damewood; Bowen Huntsman

    2004-04-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) received ISO 14001/EMS certification in June 2002. Communication played an effective role in implementing ISO 14001/EMS at the INEEL. This paper describes communication strategies used during the implementation and certification processes. The INEEL achieved Integrated Safety Management System (ISMS) and Voluntary Protection Program (VPP) Star status in 2001. ISMS implemented a formal process to plan and execute work. VPP facilitated worker involvement by establishing geographic units at various facilities with employee points of contact and management champions. The INEEL Environmental Management System (EMS) was developed to integrate the environmental functional area into its ISMS and VPP. Since the core functions of ISMS, VPP, and EMS are interchangeable, they were easy to integrate. Communication is essential to successfully implement an EMS. (According to ISO 14001 requirements, communication interacts with 12 other elements of the requirements.) We developed communication strategies that integrated ISMS, VPP, and EMS. For example, the ISMS, VPP, and EMS Web sites communicated messages to the work force, such as “VPP emphasizes the people side of doing business, ISMS emphasizes the system side of doing business, and EMS emphasizes the systems to protect the environment; but they all define work, identify and analyze hazards, and mitigate the hazards.” As a result of this integration, the work force supported and implemented the EMS. In addition, the INEEL established a cross-functional communication team to assist with implementing the EMS. The team included members from the Training and Communication organizations, VPP office, Pollution Prevention, Employee and Media Relations, a union representative, facility environmental support, and EMS staff. This crossfunctional team used various communication strategies to promote our EMS to all organization levels and successfully implemented EMS

  11. EM threat analysis for wireless systems.

    SciTech Connect

    Burkholder, R. J. (Ohio State University Electroscience Laboratory); Mariano, Robert J.; Schniter, P. (Ohio State University Electroscience Laboratory); Gupta, I. J. (Ohio State University Electroscience Laboratory)

    2006-06-01

    Modern digital radio systems are complex and must be carefully designed, especially when expected to operate in harsh propagation environments. The ability to accurately predict the effects of propagation on wireless radio performance could lead to more efficient radio designs as well as the ability to perform vulnerability analyses before and after system deployment. In this report, the authors--experts in electromagnetic (EM) modeling and wireless communication theory--describe the construction of a simulation environment that is capable of quantifying the effects of wireless propagation on the performance of digital communication.

  12. 7 CFR 1945.20 - Making EM loans available.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Secretary in making a decision on the requested natural disaster determination. (4) The Secretary will... 7 Agriculture 13 2012-01-01 2012-01-01 false Making EM loans available. 1945.20 Section 1945.20...) PROGRAM REGULATIONS (CONTINUED) EMERGENCY Disaster Assistance-General § 1945.20 Making EM loans...

  13. 7 CFR 1945.20 - Making EM loans available.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Secretary in making a decision on the requested natural disaster determination. (4) The Secretary will... 7 Agriculture 13 2011-01-01 2009-01-01 true Making EM loans available. 1945.20 Section 1945.20...) PROGRAM REGULATIONS (CONTINUED) EMERGENCY Disaster Assistance-General § 1945.20 Making EM loans...

  14. Stochastic EM-based TFBS motif discovery with MITSU

    PubMed Central

    Kilpatrick, Alastair M.; Ward, Bruce; Aitken, Stuart

    2014-01-01

    Motivation: The Expectation–Maximization (EM) algorithm has been successfully applied to the problem of transcription factor binding site (TFBS) motif discovery and underlies the most widely used motif discovery algorithms. In the wider field of probabilistic modelling, the stochastic EM (sEM) algorithm has been used to overcome some of the limitations of the EM algorithm; however, the application of sEM to motif discovery has not been fully explored. Results: We present MITSU (Motif discovery by ITerative Sampling and Updating), a novel algorithm for motif discovery, which combines sEM with an improved approximation to the likelihood function, which is unconstrained with regard to the distribution of motif occurrences within the input dataset. The algorithm is evaluated quantitatively on realistic synthetic data and several collections of characterized prokaryotic TFBS motifs and shown to outperform EM and an alternative sEM-based algorithm, particularly in terms of site-level positive predictive value. Availability and implementation: Java executable available for download at http://www.sourceforge.net/p/mitsu-motif/, supported on Linux/OS X. Contact: a.m.kilpatrick@sms.ed.ac.uk PMID:24931999

  15. CryoEM at IUCrJ: a new era

    PubMed Central

    Subramaniam, Sriram; Kühlbrandt, Werner; Henderson, Richard

    2016-01-01

    In this overview, we briefly outline recent advances in electron cryomicroscopy (cryoEM) and explain why the journal IUCrJ, published by the International Union of Crystallography, could provide a natural home for publications covering many present and future developments in the cryoEM field. PMID:26870375

  16. Click-EM for imaging metabolically tagged nonprotein biomolecules.

    PubMed

    Ngo, John T; Adams, Stephen R; Deerinck, Thomas J; Boassa, Daniela; Rodriguez-Rivera, Frances; Palida, Sakina F; Bertozzi, Carolyn R; Ellisman, Mark H; Tsien, Roger Y

    2016-06-01

    EM has long been the main technique for imaging cell structures with nanometer resolution but has lagged behind light microscopy in the crucial ability to make specific molecules stand out. Here we introduce click-EM, a labeling technique for correlative light microscopy and EM imaging of nonprotein biomolecules. In this approach, metabolic labeling substrates containing bioorthogonal functional groups are provided to cells for incorporation into biopolymers by endogenous biosynthetic machinery. The unique chemical functionality of these analogs is exploited for selective attachment of singlet oxygen-generating fluorescent dyes via bioorthogonal 'click chemistry' ligations. Illumination of dye-labeled structures generates singlet oxygen to locally catalyze the polymerization of diaminobenzidine into an osmiophilic reaction product that is readily imaged by EM. We describe the application of click-EM in imaging metabolically tagged DNA, RNA and lipids in cultured cells and neurons and highlight its use in tracking peptidoglycan synthesis in the Gram-positive bacterium Listeria monocytogenes. PMID:27110681

  17. The Orthogonally Partitioned EM Algorithm: Extending the EM Algorithm for Algorithmic Stability and Bias Correction Due to Imperfect Data.

    PubMed

    Regier, Michael D; Moodie, Erica E M

    2016-05-01

    We propose an extension of the EM algorithm that exploits the common assumption of unique parameterization, corrects for biases due to missing data and measurement error, converges for the specified model when standard implementation of the EM algorithm has a low probability of convergence, and reduces a potentially complex algorithm into a sequence of smaller, simpler, self-contained EM algorithms. We use the theory surrounding the EM algorithm to derive the theoretical results of our proposal, showing that an optimal solution over the parameter space is obtained. A simulation study is used to explore the finite sample properties of the proposed extension when there is missing data and measurement error. We observe that partitioning the EM algorithm into simpler steps may provide better bias reduction in the estimation of model parameters. The ability to breakdown a complicated problem in to a series of simpler, more accessible problems will permit a broader implementation of the EM algorithm, permit the use of software packages that now implement and/or automate the EM algorithm, and make the EM algorithm more accessible to a wider and more general audience. PMID:27227718

  18. Evaluation of Fracture Azimuth by EM Wave and Elastic Wave

    NASA Astrophysics Data System (ADS)

    Feng, X.; Wang, Q.; Liu, C.; Lu, Q.; Zeng, Z.; Liang, W.; Yu, Y.; Ren, Q.

    2013-12-01

    Fracture system plays an important role in the development of underground energy, for example enhanced geothermal system (EGS), oil shale and shale gas, etc. Therefore, it becomes more and more important to detect and evaluate the fracture system. Geophysical prospecting is an useful method to evaluate the characteristics of the subsurface fractures. Currently, micro-seismology, multi-wave seismic exploration, and electromagnetic (EM) survey are reported to be used for the purpose. We are studying a method using both elastic wave and EM wave to detect and evaluate the fracture azimuth in laboratory. First, we build a 3D horizontal transverse isotropy (HTI) model, shown in the figure 1, by dry parallel fractures system, which was constructed by plexiglass plates and papers. Then, we used the ultrasonic system to obtain reflected S-wave data. Depending on the shear wave splitting, we evaluated the fracture azimuth by the algorithm of Pearson correlation coefficient. In addition, we used the full Polarimetric ultra wide band electromagnetic (FP-UWB-EM) wave System, shown in the figure 2, to obtain full polarimetric reflected EM-wave data. Depending on the rotation of the EM wave polarimetry, we evaluated the fracture azimuth by the the ration between maximum amplitude of co-polarimetric EM wave and maximum amplitude of cross-polarimetric EM wave. Finally, we used both EM-wave data and S-wave data to evaluate the fracture azimuth by the method of cross plot and statistical mathematics. To sum up, we found that FP-UWB-EM wave can be used to evaluated the fracture azimuth and is more accurate than ultrasound wave. Also joint evaluation using both data could improve the precision.

  19. Refinement of atomic models in high resolution EM reconstructions using Flex-EM and local assessment

    PubMed Central

    Joseph, Agnel Praveen; Malhotra, Sony; Burnley, Tom; Wood, Chris; Clare, Daniel K.; Winn, Martyn; Topf, Maya

    2016-01-01

    As the resolutions of Three Dimensional Electron Microscopic reconstructions of biological macromolecules are being improved, there is a need for better fitting and refinement methods at high resolutions and robust approaches for model assessment. Flex-EM/MODELLER has been used for flexible fitting of atomic models in intermediate-to-low resolution density maps of different biological systems. Here, we demonstrate the suitability of the method to successfully refine structures at higher resolutions (2.5–4.5 Å) using both simulated and experimental data, including a newly processed map of Apo-GroEL. A hierarchical refinement protocol was adopted where the rigid body definitions are relaxed and atom displacement steps are reduced progressively at successive stages of refinement. For the assessment of local fit, we used the SMOC (segment-based Manders’ overlap coefficient) score, while the model quality was checked using the Qmean score. Comparison of SMOC profiles at different stages of refinement helped in detecting regions that are poorly fitted. We also show how initial model errors can have significant impact on the goodness-of-fit. Finally, we discuss the implementation of Flex-EM in the CCP-EM software suite. PMID:26988127

  20. Refinement of atomic models in high resolution EM reconstructions using Flex-EM and local assessment.

    PubMed

    Joseph, Agnel Praveen; Malhotra, Sony; Burnley, Tom; Wood, Chris; Clare, Daniel K; Winn, Martyn; Topf, Maya

    2016-05-01

    As the resolutions of Three Dimensional Electron Microscopic reconstructions of biological macromolecules are being improved, there is a need for better fitting and refinement methods at high resolutions and robust approaches for model assessment. Flex-EM/MODELLER has been used for flexible fitting of atomic models in intermediate-to-low resolution density maps of different biological systems. Here, we demonstrate the suitability of the method to successfully refine structures at higher resolutions (2.5-4.5Å) using both simulated and experimental data, including a newly processed map of Apo-GroEL. A hierarchical refinement protocol was adopted where the rigid body definitions are relaxed and atom displacement steps are reduced progressively at successive stages of refinement. For the assessment of local fit, we used the SMOC (segment-based Manders' overlap coefficient) score, while the model quality was checked using the Qmean score. Comparison of SMOC profiles at different stages of refinement helped in detecting regions that are poorly fitted. We also show how initial model errors can have significant impact on the goodness-of-fit. Finally, we discuss the implementation of Flex-EM in the CCP-EM software suite. PMID:26988127

  1. Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993

    SciTech Connect

    Not Available

    1993-12-31

    The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical, and technical literacy and competency. This report discusses fiscal year 1993 activities.

  2. Online EM with weight-based forgetting.

    PubMed

    Celaya, Enric; Agostini, Alejandro

    2015-05-01

    In the online version of the EM algorithm introduced by Sato and Ishii ( 2000 ), a time-dependent discount factor is introduced for forgetting the effect of the old estimated values obtained with an earlier, inaccurate estimator. In their approach, forgetting is uniformly applied to the estimators of each mixture component depending exclusively on time, irrespective of the weight attributed to each unit for the observed sample. This causes an excessive forgetting in the less frequently sampled regions. To address this problem, we propose a modification of the algorithm that involves a weight-dependent forgetting, different for each mixture component, in which old observations are forgotten according to the actual weight of the new samples used to replace older values. A comparison of the time-dependent versus the weight-dependent approach shows that the latter improves the accuracy of the approximation and exhibits much greater stability. PMID:25710091

  3. DOE EM industry programs robotics development

    SciTech Connect

    Staubly, R.; Kothari, V.

    1997-12-01

    The Office of Science and Technology (OST) manages an aggressive program for RD&D, as well as testing and evaluation for the U.S. Department of Energy`s (DOE) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. OST has organized technology management activities along focus teams for each major problem area. There are currently five focus areas: decontamination and decommissioning, tanks, subsurface contaminants, mixed waste, and plutonium. In addition, OST is pursuing research and development (R&D) that cuts across these focus areas by having applications in two or more focus areas. Currently, there are three cross-cutting programs: the robotics technology development; characterization, monitoring, and sensor technologies; and efficient separations and processing.

  4. Electromagnetic optimization of EMS-MAGLEV systems

    SciTech Connect

    Andriollo, M.; Martinelli, G.; Morini, A.; Tortella, A.

    1998-07-01

    In EMS-MAGLEV high-speed transport systems, devices for propulsion, levitation and contactless on-board electric power transfer are combined in a single electromagnetic structure. The strong coupling among the windings affects the performance of each device and requires the utilization of numerical codes. The paper describes an overall optimization procedure, based on a suitable mathematical model of the system, which takes into account several items of the system performance. The parameters of the model are calculated by an automated sequence of FEM analyses of the configuration. Both the linear generator output characteristics and the propulsion force ripple are improved applying the procedure to a reference configuration. The results are compared with the results obtained by a sequence of partial optimizations operating separately on two different subsets of the geometric parameters.

  5. Processing of Structurally Heterogeneous Cryo-EM Data in RELION.

    PubMed

    Scheres, S H W

    2016-01-01

    This chapter describes algorithmic advances in the RELION software, and how these are used in high-resolution cryo-electron microscopy (cryo-EM) structure determination. Since the presence of projections of different three-dimensional structures in the dataset probably represents the biggest challenge in cryo-EM data processing, special emphasis is placed on how to deal with structurally heterogeneous datasets. As such, this chapter aims to be of practical help to those who wish to use RELION in their cryo-EM structure determination efforts. PMID:27572726

  6. E.M. and Hadronic Shower Simulation with FLUKA

    SciTech Connect

    Battistoni, G.; Fasso, A.; Ferrari, A.; Ranft, J.; Rubbia, A.; Sala, P.R.; /INFN, Milan /SLAC /CERN /Siegen U. /Zurich, ETH

    2005-10-03

    A description of the main features of e.m. and hadronic shower simulation models used in the FLUKA code is summarized and some recent applications are discussed. The general status of the FLUKA project is also reported.

  7. Test beam performance of CDF plug upgrade EM calorimeter

    SciTech Connect

    Fukui, Y.

    1998-11-01

    CDF Plug Upgrade(tile-fiber) EM Calorimeter performed resolution of 15{percent}/{radical} (E) {circle_plus}0.7{percent} with non-linearity less than 1{percent} in a energy range of 5{endash}180 GeV at Fermilab Test Beam. Transverse uniformity of inside-tower-response of the EM Calorimeter was 2.2{percent} with 56 GeV positron, which was reduced to 1.0{percent} with response map correction. We observed 300 photo electron/GeV in the EM Calorimeter. Ratios of EM Calorimeter response to positron beam to that to {sup 137}C{sub s} Source was stable within 1{percent} in the period of 8 months. {copyright} {ital 1998 American Institute of Physics.}

  8. 7 CFR 759.6 - EM to be made available.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Agriculture under the Plant Protection Act or the animal quarantine laws, as defined in section 2509 of the Food, Agriculture, Conservation, and Trade Act of 1990, automatically authorizes EM for production...

  9. 7 CFR 759.6 - EM to be made available.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Agriculture under the Plant Protection Act or the animal quarantine laws, as defined in section 2509 of the Food, Agriculture, Conservation, and Trade Act of 1990, automatically authorizes EM for production...

  10. NASA EM Followup of LIGO-Virgo Candidate Events

    NASA Technical Reports Server (NTRS)

    Blackburn, Lindy L.

    2011-01-01

    We present a strategy for a follow-up of LIGO-Virgo candidate events using offline survey data from several NASA high-energy photon instruments aboard RXTE, Swift, and Fermi. Time and sky-location information provided by the GW trigger allows for a targeted search for prompt and afterglow EM signals. In doing so, we expect to be sensitive to signals which are too weak to be publicly reported as astrophysical EM events.

  11. EM Telemetry Tool for Deep Well Drilling Applications

    SciTech Connect

    Jeffrey M. Gabelmann

    2005-11-15

    This final report discusses the successful development and testing of a deep operational electromagnetic (EM) telemetry system, produced under a cooperative agreement with the United States Department of Energy's National Energy Technology Laboratory. This new electromagnetic telemetry system provides a wireless communication link between sensors deployed deep within oil and gas wells and data acquisition equipment located on the earth's surface. EM based wireless telemetry is a highly appropriate technology for oil and gas exploration in that it avoids the need for thousands of feet of wired connections. In order to achieve the project performance objectives, significant improvements over existing EM telemetry systems were made. These improvements included the development of new technologies that have improved the reliability of the communications link while extending operational depth. A key element of the new design is the incorporation of a data-fusion methodology which enhances the communication receiver's ability to extract very weak signals from large amounts of ambient environmental noise. This innovative data-fusion receiver based system adapts advanced technologies, not normally associated with low-frequency communications, and makes them work within the harsh drilling environments associated with the energy exploration market. Every element of a traditional EM telemetry system design, from power efficiency to reliability, has been addressed. The data fusion based EM telemetry system developed during this project is anticipated to provide an EM tool capability that will impact both onshore and offshore oil and gas exploration operations, for conventional and underbalanced drilling applications.

  12. A HF EM installation allowing simultaneous whole body and deep local EM hyperthermia.

    PubMed

    Mazokhin, V N; Kolmakov, D N; Lucheyov, N A; Gelvich, E A; Troshin, I I

    1999-01-01

    The structure and main features of a HF EM installation based upon a new approach for creating electromagnetic fields destined for whole body (WBH) and deep local (DLH) hyperthermia are discussed. The HF EM field, at a frequency of 13.56 MHz, is created by a coplanar capacity type applicator positioned under a distilled water filled bolus that the patient is lying on. The EM energy being released directly in the deep tissues ensures effective whole body heating to required therapeutic temperatures of up to 43.5 degrees C, whereas the skin temperature can be maintained as low as 39-40.5 degrees C. For DLH, the installation is equipped with additional applicators and a generator operating at a frequency of 40.68 MHz. High efficiency of the WBH applicator makes it possible to carry out the WBH procedure without any air-conditioning cabin. Due to this, a free access to the patient's body during the WBH treatment is provided and a simultaneous WBH/DLH or WBH/LH procedure by means of additional applicators is possible. Controllable power output in the range of 100-800 W at a frequency of 13.56 MHz and 50-350 W at a frequency of 40.68 MHz allows accurate temperature control during WBH, DLH and WBH/DLH procedures. SAR patterns created by the WBH and DLH applicators in a liquid muscle phantom and measured by means of a non-perturbing E-dipole are investigated. The scattered EM field strength measured in the vicinity of the operating installation during the WBH, DLH and WBH/DLH procedures does not exceed security standards. Examples of temperature versus time graphs in the course of WBH, DLH and WBH/DLH procedures in clinics are presented. The installation is successfully used in leading oncological institutions of Russia and Belarus, though combined WBH/DLH procedures are evidently more complicated and demand thorough planning and temperature measurements to avoid overheating. PMID:10458570

  13. Analysis of EM dataset with several sensor configurations obtained by the loop-loop EM survey on magnetic anomalies

    NASA Astrophysics Data System (ADS)

    CHOI, J.; Yi, M. J.; Sasaki, Y.; Son, J.; Nam, M. J.

    2015-12-01

    Most of mineral mines in Korea are located in rugged mountain area embedding small-scale anomalies. Loop-loop EM survey system can be a better choice for exploring those mines because no ground contact is required and portable loops are freely positioned. Survey design is very important for detecting small amount of mineral deposits efficiently and spatial limits of survey lines should be considered. Along a same survey line, surveys with different separations between a transmitter and a receiver are applicable. EM responses are calculated in a layered-earth model embedding magnetic anomalies and analyses considering electric conductivity and magnetic permeability are made for the loop-loop EM survey data. Combining EM dataset with multi-frequency and multi-separation slightly enhanced a reconstructed image. Loop-loop EM survey using PROMOIS system was conducted on a small magnetite mine. Inversion with and without considering magnetic permeability was conducted for EM data with multi-frequency and multi-separation between a transmitter and a receiver.

  14. DOE EM industry programs robotics development

    SciTech Connect

    Staubly, R.; Kothari, V.

    1998-12-31

    The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy`s (DOE`s) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution.

  15. Databases and Archiving for CryoEM.

    PubMed

    Patwardhan, A; Lawson, C L

    2016-01-01

    CryoEM in structural biology is currently served by three public archives-EMDB for 3DEM reconstructions, PDB for models built from 3DEM reconstructions, and EMPIAR for the raw 2D image data used to obtain the 3DEM reconstructions. These archives play a vital role for both the structural community and the wider biological community in making the data accessible so that results may be reused, reassessed, and integrated with other structural and bioinformatics resources. The important role of the archives is underpinned by the fact that many journals mandate the deposition of data to PDB and EMDB on publication. The field is currently undergoing transformative changes where on the one hand high-resolution structures are becoming a routine occurrence while on the other hand electron tomography is enabling the study of macromolecules in the cellular context. Concomitantly the archives are evolving to best serve their stakeholder communities. In this chapter, we describe the current state of the archives, resources available for depositing, accessing, searching, visualizing and validating data, on-going community-wide initiatives and opportunities, and challenges for the future. PMID:27572735

  16. Degradation of Benzodiazepines after 120 Days of EMS Deployment

    PubMed Central

    McMullan, Jason T.; Jones, Elizabeth; Barnhart, Bruce; Denninghoff, Kurt; Spaite, Daniel; Zaleski, Erin; Silbergleit, Robert

    2014-01-01

    Introduction EMS treatment of status epilepticus improves outcomes, but the benzodiazepine best suited for EMS use is unclear, given potential high environmental temperature exposures. Objective To describe the degradation of diazepam, lorazepam, and midazolam as a function of temperature exposure and time over 120 days of storage on active EMS units. Methods Study boxes containing vials of diazepam, lorazepam, and midazolam were distributed to 4 active EMS units in each of 2 EMS systems in the southwestern United States during May–August 2011. The boxes logged temperature every minute and were stored in EMS units per local agency policy. Two vials of each drug were removed from each box at 30-day intervals and underwent high-performance liquid chromatography to determine drug concentration. Concentration was analyzed as mean (and 95%CI) percent of initial labeled concentration as a function of time and mean kinetic temperature (MKT). Results 192 samples were collected (2 samples of each drug from each of 4 units per city at 4 time-points). After 120 days, the mean relative concentration (95%CI) of diazepam was 97.0% (95.7–98.2%) and of midazolam was 99.0% (97.7–100.2%). Lorazepam experienced modest degradation by 60 days (95.6% [91.6–99.5%]) and substantial degradation at 90 days (90.3% [85.2-95.4%]) and 120 days (86.5% [80.7–92.3%]). Mean MKT was 31.6°C (95%CI 27.1–36.1). Increasing MKT was associated with greater degradation of lorazepam, but not midazolam or diazepam. Conclusions Midazolam and diazepam experienced minimal degradation throughout 120 days of EMS deployment in high-heat environments. Lorazepam experienced significant degradation over 120 days and appeared especially sensitive to higher MKT exposure. PMID:24548058

  17. Persistent topology for cryo-EM data analysis.

    PubMed

    Xia, Kelin; Wei, Guo-Wei

    2015-08-01

    In this work, we introduce persistent homology for the analysis of cryo-electron microscopy (cryo-EM) density maps. We identify the topological fingerprint or topological signature of noise, which is widespread in cryo-EM data. For low signal-to-noise ratio (SNR) volumetric data, intrinsic topological features of biomolecular structures are indistinguishable from noise. To remove noise, we employ geometric flows that are found to preserve the intrinsic topological fingerprints of cryo-EM structures and diminish the topological signature of noise. In particular, persistent homology enables us to visualize the gradual separation of the topological fingerprints of cryo-EM structures from those of noise during the denoising process, which gives rise to a practical procedure for prescribing a noise threshold to extract cryo-EM structure information from noise contaminated data after certain iterations of the geometric flow equation. To further demonstrate the utility of persistent homology for cryo-EM data analysis, we consider a microtubule intermediate structure Electron Microscopy Data (EMD 1129). Three helix models, an alpha-tubulin monomer model, an alpha-tubulin and beta-tubulin model, and an alpha-tubulin and beta-tubulin dimer model, are constructed to fit the cryo-EM data. The least square fitting leads to similarly high correlation coefficients, which indicates that structure determination via optimization is an ill-posed inverse problem. However, these models have dramatically different topological fingerprints. Especially, linkages or connectivities that discriminate one model from another, play little role in the traditional density fitting or optimization but are very sensitive and crucial to topological fingerprints. The intrinsic topological features of the microtubule data are identified after topological denoising. By a comparison of the topological fingerprints of the original data and those of three models, we found that the third model is

  18. Emergency medical service (EMS): A unique flight environment

    NASA Technical Reports Server (NTRS)

    Shively, R. Jay

    1993-01-01

    The EMS flight environment is unique in today's aviation. The pilots must respond quickly to emergency events and often fly to landing zones where they have never been before . The time from initially receiving a call to being airborne can be as little as two to three minutes. Often the EMS pilot is the only aviation professional on site, they have no operations people or other pilots to aid them in making decisons. Further, since they are often flying to accident scenes, not airports, there is often complete weather and condition information. Therefore, the initial decision that the pilot must make, accepting or declining a flight, can become very difficult. The accident rate of EMS helicopters has been relatively high over the past years. NASA-Ames research center has taken several steps in an attempt to aid EMS pilots in their decision making and situational awareness. A preflight risk assessment system (SAFE) was developed to aid pilots in their decision making, and was tested at an EMS service. The resutls of the study were promising and a second version incorporating the lessons learned is under development. A second line of research was the development of a low cost electronic chart display (ECD). This is a digital map display to help pilots maintain geographical orientation. Another thrust was undertaken in conjunction with the Aviation Safety Reporting System (ASRS). This involved publicizing the ASRS to EMS pilots and personnel, and calling each of the reporters back to gather additional information. This paper will discuss these efforts and how they may positively impact the safety of EMS operations.

  19. Colloidal Oatmeal <em>(Avena Sativa)em> Improves Skin Barrier Through Multi-Therapy Activity.

    PubMed

    Ilnytska, Olha; Kaur, Simarna; Chon, Suhyoun; Reynertson, Kurt A; Nebus, Judith; Garay, Michelle; Mahmood, Khalid; Southall, Michael D

    2016-06-01

    Oats (Avena sativa) are a centuries-old topical treatment for a variety of skin barrier conditions, including dry skin, skin rashes, and eczema; however, few studies have investigated the actual mechanism of action for the skin barrier strengthening activity of colloidal oatmeal. Four extracts of colloidal oatmeal were prepared with various solvents and tested in vitro for skin barrier related gene expression and activity. Extracts of colloidal oatmeal were found to induce the expression of genes related to epidermal differentiation, tight junctions and lipid regulation in skin, and provide pH-buffering capacity. Colloidal oatmeal boosted the expression of multiple target genes related to skin barrier, and resulted in recovery of barrier damage in an in vitro model of atopic dermatitis. In addition, an investigator-blinded study was performed with 50 healthy female subjects who exhibited bilateral moderate to severe dry skin on their lower legs. Subjects were treated with a colloidal oatmeal skin protectant lotion. Clinically, the colloidal oatmeal lotion showed significant clinical improvements in skin dryness, moisturization, and barrier. Taken together, these results demonstrate that colloidal oatmeal can provide clinically effective benefits for dry and compromised skin by strengthening skin barrier.

    <em>J Drugs Dermatolem>. 2016;15(6):684-690. PMID:27272074

  20. Learning when to Hold'em and When to Fold'em: ERS's Budget Hold'em Game Facilitates the Budget Development Process in Memphis

    ERIC Educational Resources Information Center

    Education Resource Strategies, 2010

    2010-01-01

    If your school district is facing a budget issue, it might surprise you to learn that the solution might very well lie in a game of cards. That certainly was the case earlier this year for the city schools of Memphis, Tennessee. The game is called Budget Hold'em, and it was developed by Education Resource Strategies (ERS) of Watertown,…

  1. Topical Treatment With an Agent Disruptive to <em>P. acnesem> Biofilm Provides Positive Therapeutic Response: Results of a Randomized Clinical Trial.

    PubMed

    Bernhardt, Michael J; Myntti, Matthew F

    2016-06-01

    The traditional disease model of acne has been one of follicular plugging due to 'sticky epithelial cells' associated with increased sebum production with deep follicular anaerobic conditions favoring <em>P. acnesem>- generated inflammation. <em>P. acnesem> biofilms have been found more frequently in patients with acne than controls. Biofilms are genetically coded to create adhesion to the pilosebaceous unit followed by production of a mucopolysaccharide coating capable of binding to lipid surfaces. Traditional therapies for acne have involved mixtures of oral and topical antibiotics admixed with topical keratolytics and retinoids, which are aimed at traditional bacterial reduction as well as downregulating the inflammatory cascade. These approaches are limited by side effect and compliance/tolerability issues. As the <em>P. acnesem> biofilm may, in fact, be the instigator of this process, we studied the use of a topical agent designed to reduce the <em>P. acnesem> biofilm to see if reducing the biofilm would be therapeutically efficacious. We present data of a proprietary topical non-prescription agent with a novel pharmaco mechanism designed to attack the biofilm produced by <em>P. acnesem>. Our data shows a decrease of inflammatory lesions by 44% and non-inflammatory lesions by 32% after 12 weeks and also provided for a meaningful improvement in the quality of life of the patients in the study. These improvements were achieved with a product that was not associated with burning, chafing, irritation, or erythema, which can be seen with topical treatments. It is apparent from this study that by addressing the biofilm which protects the <em>P. acnesem> bacteria through the use of the Acne Gel, the incidence of acne symptoms can be greatly reduced, while having no negative impacts on the patients' skin (ClinicalTrials.gov registry number NCT02404285).

    <em>J Drugs Dermatol. em>2016;15(6):677-683. PMID:27272073

  2. Breaking Cryo-EM Resolution Barriers to Facilitate Drug Discovery.

    PubMed

    Merk, Alan; Bartesaghi, Alberto; Banerjee, Soojay; Falconieri, Veronica; Rao, Prashant; Davis, Mindy I; Pragani, Rajan; Boxer, Matthew B; Earl, Lesley A; Milne, Jacqueline L S; Subramaniam, Sriram

    2016-06-16

    Recent advances in single-particle cryoelecton microscopy (cryo-EM) are enabling generation of numerous near-atomic resolution structures for well-ordered protein complexes with sizes ≥ ∼200 kDa. Whether cryo-EM methods are equally useful for high-resolution structural analysis of smaller, dynamic protein complexes such as those involved in cellular metabolism remains an important question. Here, we present 3.8 Å resolution cryo-EM structures of the cancer target isocitrate dehydrogenase (93 kDa) and identify the nature of conformational changes induced by binding of the allosteric small-molecule inhibitor ML309. We also report 2.8-Å- and 1.8-Å-resolution structures of lactate dehydrogenase (145 kDa) and glutamate dehydrogenase (334 kDa), respectively. With these results, two perceived barriers in single-particle cryo-EM are overcome: (1) crossing 2 Å resolution and (2) obtaining structures of proteins with sizes < 100 kDa, demonstrating that cryo-EM can be used to investigate a broad spectrum of drug-target interactions and dynamic conformational states. PMID:27238019

  3. Active geophysical monitoring of hydrocarbon reservoirs using EM methods

    NASA Astrophysics Data System (ADS)

    Gribenko, A.; Black, N.; Zhdanov, M. S.

    2008-12-01

    Marine controlled-source electromagnetic (MCSEM) technology has been successfully established as an effective tool for offshore hydrocarbon (HC) exploration. In this paper we consider another application of the MCSEM method for HC reservoir monitoring. We demonstrate that EM methods can be successfully used for the monitoring of producing wells in connection with the enhanced recovery of hydrocarbons. We have developed a new powerful EM modeling technique based on the integral equation method with an inhomogeneous background conductivity (IE IBC). This new method and the corresponding computer software make it possible to model the EM response over a realistic complex model of a sea-bottom HC reservoir. The numerical modeling results demonstrate that the MCSEM method has the ability to map changes in resistivity caused by the production of hydrocarbons over time. In addition, the EM data help to visualize the changes in the location of the oil-water contact within the reservoir. This result opens the possibility for practical application of the EM method in HC reservoir monitoring.

  4. Application of the EM algorithm to radiographic images.

    PubMed

    Brailean, J C; Little, D; Giger, M L; Chen, C T; Sullivan, B J

    1992-01-01

    The expectation maximization (EM) algorithm has received considerable attention in the area of positron emitted tomography (PET) as a restoration and reconstruction technique. In this paper, the restoration capabilities of the EM algorithm when applied to radiographic images is investigated. This application does not involve reconstruction. The performance of the EM algorithm is quantitatively evaluated using a "perceived" signal-to-noise ratio (SNR) as the image quality metric. This perceived SNR is based on statistical decision theory and includes both the observer's visual response function and a noise component internal to the eye-brain system. For a variety of processing parameters, the relative SNR (ratio of the processed SNR to the original SNR) is calculated and used as a metric to compare quantitatively the effects of the EM algorithm with two other image enhancement techniques: global contrast enhancement (windowing) and unsharp mask filtering. The results suggest that the EM algorithm's performance is superior when compared to unsharp mask filtering and global contrast enhancement for radiographic images which contain objects smaller than 4 mm. PMID:1435595

  5. Refinement of Atomic Structures Against cryo-EM Maps.

    PubMed

    Murshudov, G N

    2016-01-01

    This review describes some of the methods for atomic structure refinement (fitting) against medium/high-resolution single-particle cryo-EM reconstructed maps. Some of the tools developed for macromolecular X-ray crystal structure analysis, especially those encapsulating prior chemical and structural information can be transferred directly for fitting into cryo-EM maps. However, despite the similarities, there are significant differences between data produced by these two techniques; therefore, different likelihood functions linking the data and model must be used in cryo-EM and crystallographic refinement. Although tools described in this review are mostly designed for medium/high-resolution maps, if maps have sufficiently good quality, then these tools can also be used at moderately low resolution, as shown in one example. In addition, the use of several popular crystallographic methods is strongly discouraged in cryo-EM refinement, such as 2Fo-Fc maps, solvent flattening, and feature-enhanced maps (FEMs) for visualization and model (re)building. Two problems in the cryo-EM field are overclaiming resolution and severe map oversharpening. Both of these should be avoided; if data of higher resolution than the signal are used, then overfitting of model parameters into the noise is unavoidable, and if maps are oversharpened, then at least parts of the maps might become very noisy and ultimately uninterpretable. Both of these may result in suboptimal and even misleading atomic models. PMID:27572731

  6. International Space Station (ISS) Emergency Mask (EM) Development

    NASA Technical Reports Server (NTRS)

    Toon, Katherine P.; Hahn, Jeffrey; Fowler, Michael; Young, Kevin

    2011-01-01

    The Emergency Mask (EM) is considered a secondary response emergency Personal Protective Equipment (PPE) designed to provide respiratory protection to the International Space Station (ISS) crewmembers in response to a post-fire event or ammonia leak. The EM is planned to be delivered to ISS in 2012 to replace the current air purifying respirator (APR) onboard ISS called the Ammonia Respirator (AR). The EM is a one ]size ]fits ]all model designed to fit any size crewmember, unlike the APR on ISS, and uses either two Fire Cartridges (FCs) or two Commercial Off-the-Shelf (COTS) 3M(Trademark). Ammonia Cartridges (ACs) to provide the crew with a minimum of 8 hours of respiratory protection with appropriate cartridge swap ]out. The EM is designed for a single exposure event, for either post ]fire or ammonia, and is a passive device that cannot help crewmembers who cannot breathe on their own. The EM fs primary and only seal is around the wearer fs neck to prevent a crewmember from inhaling contaminants. During the development of the ISS Emergency Mask, several design challenges were faced that focused around manufacturing a leak free mask. The description of those challenges are broadly discussed but focuses on one key design challenge area: bonding EPDM gasket material to Gore(Registered Trademark) fabric hood.

  7. A Computerized Evaluation Methodology for Pre-Hospital EMS Cardiac Care

    PubMed Central

    Nagurney, Frank K.

    1980-01-01

    The computerized application of cardiac care protocols for pre-hospital EMS care is presented. The program logic is reviewed and an example of its application is provided. Uses of the results of the program in EMS management are suggested.

  8. EMS Stretcher “Misadventures” in a Large, Urban EMS System: A Descriptive Analysis of Contributing Factors and Resultant Injuries

    PubMed Central

    Goodloe, Jeffrey M.; Crowder, Christopher J.; Arthur, Annette O.; Thomas, Stephen H.

    2012-01-01

    Purpose. There is a paucity of data regarding EMS stretcher-operation-related injuries. This study describes and analyzes characteristics associated with undesirable stretcher operations, with or without resultant injury in a large, urban EMS agency. Methods. In the study agency, all stretcher-related “misadventures” are required to be documented, regardless of whether injury results. All stretcher-related reports between July 1, 2009 and June 30, 2010 were queried in retrospective analysis, avoiding Hawthorne effect in stretcher operations. Results. During the year studied, 129,110 patients were transported. 23 stretcher incidents were reported (0.16 per 1,000 transports). No patient injury occurred. Four EMS providers sustained minor injuries. Among contributing aspects, the most common involved operations surrounding the stretcher-ambulance safety latch, 14/23 (60.9%). From a personnel injury prevention perspective, there exists a significant relationship between combative patients and crew injury related to stretcher operation, Fisher's exact test 0.048. Conclusions. In this large, urban EMS system, the incidence of injury related to stretcher operations in the one-year study period is markedly low, with few personnel injuries and no patient injuries incurred. Safety for EMS personnel and patients could be advanced by educational initiatives that highlight specific events and conditions contributing to stretcher-related adverse events. PMID:22606379

  9. Virus particle dynamics derived from CryoEM studies.

    PubMed

    Doerschuk, Peter C; Gong, Yunye; Xu, Nan; Domitrovic, Tatiana; Johnson, John E

    2016-06-01

    The direct electron detector has revolutionized electron cryo-microscopy (CryoEM). Icosahedral virus structures are routinely produced at 4Å resolution or better and the approach has largely displaced virus crystallography, as it requires less material, less purity and often produces a structure more rapidly. Largely ignored in this new era of CryoEM is the dynamic information in the data sets that was not available in X-ray structures. Here we review an approach that captures the dynamic character of viruses displayed in the CryoEM ensemble of particles at the moment of freezing. We illustrate the approach with a simple model, briefly describe the details and provide a practical application to virus particle maturation. PMID:27085980

  10. Recent technical advancements enabled atomic resolution CryoEM

    NASA Astrophysics Data System (ADS)

    Xueming, Li

    2016-01-01

    With recent breakthroughs in camera and image processing technologies single-particle electron cryo-microscopy (CryoEM) has suddenly gained the attention of structural biologists as a powerful tool able to solve the atomic structures of biological complexes and assemblies. Compared with x-ray crystallography, CryoEM can be applied to partially flexible structures in solution and without the necessity of crystallization, which is especially important for large complexes and assemblies. This review briefly explains several key bottlenecks for atomic resolution CryoEM, and describes the corresponding solutions for these bottlenecks based on the recent technical advancements. The review also aims to provide an overview about the technical differences between its applications in biology and those in material science. Project supported by Tsinghua-Peking Joint Center for Life Sciences, China.

  11. Geospatial Analysis of Pediatric EMS Run Density and Endotracheal Intubation

    PubMed Central

    Hansen, Matthew; Loker, William; Warden, Craig

    2016-01-01

    Introduction The association between geographic factors, including transport distance, and pediatric emergency medical services (EMS) run clustering on out-of-hospital pediatric endotracheal intubation is unclear. The objective of this study was to determine if endotracheal intubation procedures are more likely to occur at greater distances from the hospital and near clusters of pediatric calls. Methods This was a retrospective observational study including all EMS runs for patients less than 18 years of age from 2008 to 2014 in a geographically large and diverse Oregon county that includes densely populated urban areas near Portland and remote rural areas. We geocoded scene addresses using the automated address locator created in the cloud-based mapping platform ArcGIS, supplemented with manual address geocoding for remaining cases. We then use the Getis-Ord Gi spatial statistic feature in ArcGIS to map statistically significant spatial clusters (hot spots) of pediatric EMS runs throughout the county. We then superimposed all intubation procedures performed during the study period on maps of pediatric EMS-run hot spots, pediatric population density, fire stations, and hospitals. We also performed multivariable logistic regression to determine if distance traveled to the hospital was associated with intubation after controlling for several confounding variables. Results We identified a total of 7,797 pediatric EMS runs during the study period and 38 endotracheal intubations. In univariate analysis we found that patients who were intubated were similar to those who were not in gender and whether or not they were transported to a children’s hospital. Intubated patients tended to be transported shorter distances and were older than non-intubated patients. Increased distance from the hospital was associated with reduced odds of intubation after controlling for age, sex, scene location, and trauma system entry status in a multivariate logistic regression. The

  12. Speaker verification using combined acoustic and EM sensor signal processing

    SciTech Connect

    Ng, L C; Gable, T J; Holzrichter, J F

    2000-11-10

    Low Power EM radar-like sensors have made it possible to measure properties of the human speech production system in real-time, without acoustic interference. This greatly enhances the quality and quantity of information for many speech related applications. See Holzrichter, Burnett, Ng, and Lea, J. Acoustic. SOC. Am . 103 ( 1) 622 (1998). By combining the Glottal-EM-Sensor (GEMS) with the Acoustic-signals, we've demonstrated an almost 10 fold reduction in error rates from a speaker verification system experiment under a moderate noisy environment (-10dB).

  13. Low Bandwidth Vocoding using EM Sensor and Acoustic Signal Processing

    SciTech Connect

    Ng, L C; Holzrichter, J F; Larson, P E

    2001-10-25

    Low-power EM radar-like sensors have made it possible to measure properties of the human speech production system in real-time, without acoustic interference [1]. By combining these data with the corresponding acoustic signal, we've demonstrated an almost 10-fold bandwidth reduction in speech compression, compared to a standard 2.4 kbps LPC10 protocol used in the STU-III (Secure Terminal Unit, third generation) telephone. This paper describes a potential EM sensor/acoustic based vocoder implementation.

  14. Developments in the EM-CCD camera for OGRE

    NASA Astrophysics Data System (ADS)

    Tutt, James H.; McEntaffer, Randall L.; DeRoo, Casey; Schultz, Ted; Miles, Drew M.; Zhang, William; Murray, Neil J.; Holland, Andrew D.; Cash, Webster; Rogers, Thomas; O'Dell, Steve; Gaskin, Jessica; Kolodziejczak, Jeff; Evagora, Anthony M.; Holland, Karen; Colebrook, David

    2014-07-01

    The Off-plane Grating Rocket Experiment (OGRE) is a sub-orbital rocket payload designed to advance the development of several emerging technologies for use on space missions. The payload consists of a high resolution soft X-ray spectrometer based around an optic made from precision cut and ground, single crystal silicon mirrors, a module of off-plane gratings and a camera array based around Electron Multiplying CCD (EM-CCD) technology. This paper gives an overview of OGRE with emphasis on the detector array; specifically this paper will address the reasons that EM-CCDs are the detector of choice and the advantages and disadvantages that this technology offers.

  15. Item Parameter Estimation via Marginal Maximum Likelihood and an EM Algorithm: A Didactic.

    ERIC Educational Resources Information Center

    Harwell, Michael R.; And Others

    1988-01-01

    The Bock and Aitkin Marginal Maximum Likelihood/EM (MML/EM) approach to item parameter estimation is an alternative to the classical joint maximum likelihood procedure of item response theory. This paper provides the essential mathematical details of a MML/EM solution and shows its use in obtaining consistent item parameter estimates. (TJH)

  16. Reservoir characterization and steam flood monitoring with crosshole EM

    SciTech Connect

    Wilt, M.; Torres-Verdin, C.

    1995-06-01

    Crosshole electromagnetic (EM) imaging is applied to reservoir characterization and steam flood monitoring in a central California oil field. Steam was injected into three stacked eastward-dipping, unconsolidated oil sands within the upper 200 m. The steam plume is expected to develop as an ellipse aligned with the regional northwest-southeast strike. EM measurements were made from two fiberglass-cased observation wells straddling the steam injector on a northeast-southwest profile using the LLNL frequency domain crosshole EM system. Field data were collected before the initiation of a steam drive to map the distribution of the oil sands and then 6 and 12 months later to monitor the progress of the steam chest. Resistivity images derived from the EM data before steam injection clearly delineate the distribution and dipping structure on the target oil sands. Difference images, from data collected before and after steam flooding, show resistivity changes that indicate that the steam chest has developed only in the deeper oil sands although steam injection occurred in all three sand layers.

  17. 7 CFR 1945.20 - Making EM loans available.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Making EM loans available. 1945.20 Section 1945.20 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE...

  18. Functionalized anatomical models for EM-neuron Interaction modeling.

    PubMed

    Neufeld, Esra; Cassará, Antonino Mario; Montanaro, Hazael; Kuster, Niels; Kainz, Wolfgang

    2016-06-21

    The understanding of interactions between electromagnetic (EM) fields and nerves are crucial in contexts ranging from therapeutic neurostimulation to low frequency EM exposure safety. To properly consider the impact of in vivo induced field inhomogeneity on non-linear neuronal dynamics, coupled EM-neuronal dynamics modeling is required. For that purpose, novel functionalized computable human phantoms have been developed. Their implementation and the systematic verification of the integrated anisotropic quasi-static EM solver and neuronal dynamics modeling functionality, based on the method of manufactured solutions and numerical reference data, is described. Electric and magnetic stimulation of the ulnar and sciatic nerve were modeled to help understanding a range of controversial issues related to the magnitude and optimal determination of strength-duration (SD) time constants. The results indicate the importance of considering the stimulation-specific inhomogeneous field distributions (especially at tissue interfaces), realistic models of non-linear neuronal dynamics, very short pulses, and suitable SD extrapolation models. These results and the functionalized computable phantom will influence and support the development of safe and effective neuroprosthetic devices and novel electroceuticals. Furthermore they will assist the evaluation of existing low frequency exposure standards for the entire population under all exposure conditions. PMID:27224508

  19. 7 CFR 1945.35 - Special EM loan training.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS...) PROGRAM REGULATIONS (CONTINUED) EMERGENCY Disaster Assistance-General § 1945.35 Special EM loan training. (a) General. When it is evident that a large number of farmers were affected by a widespread...

  20. Functionalized anatomical models for EM-neuron Interaction modeling

    NASA Astrophysics Data System (ADS)

    Neufeld, Esra; Cassará, Antonino Mario; Montanaro, Hazael; Kuster, Niels; Kainz, Wolfgang

    2016-06-01

    The understanding of interactions between electromagnetic (EM) fields and nerves are crucial in contexts ranging from therapeutic neurostimulation to low frequency EM exposure safety. To properly consider the impact of in vivo induced field inhomogeneity on non-linear neuronal dynamics, coupled EM-neuronal dynamics modeling is required. For that purpose, novel functionalized computable human phantoms have been developed. Their implementation and the systematic verification of the integrated anisotropic quasi-static EM solver and neuronal dynamics modeling functionality, based on the method of manufactured solutions and numerical reference data, is described. Electric and magnetic stimulation of the ulnar and sciatic nerve were modeled to help understanding a range of controversial issues related to the magnitude and optimal determination of strength-duration (SD) time constants. The results indicate the importance of considering the stimulation-specific inhomogeneous field distributions (especially at tissue interfaces), realistic models of non-linear neuronal dynamics, very short pulses, and suitable SD extrapolation models. These results and the functionalized computable phantom will influence and support the development of safe and effective neuroprosthetic devices and novel electroceuticals. Furthermore they will assist the evaluation of existing low frequency exposure standards for the entire population under all exposure conditions.

  1. Texas Hold 'em Online Poker: A Further Examination

    ERIC Educational Resources Information Center

    Hopley, Anthony A. B.; Dempsey, Kevin; Nicki, Richard

    2012-01-01

    Playing Texas Hold 'em Online Poker (THOP) is on the rise. However, there is relatively little research examining factors that contribute to problem gambling in poker players. The aim of this study was to extend the research findings of Hopley and Nicki (2010). The negative mood states of depression, anxiety and stress were found to be linked to…

  2. Airborne EM for geothermal and hydrogeological mapping

    NASA Astrophysics Data System (ADS)

    Menghini, A.; Manzella, A.; Viezzoli, A.; Montanari, D.; Maggi, S.

    2012-12-01

    Within the "VIGOR" project, aimed at assessing the geothermal potential of four regions in southern Italy, Airborne EM data have been acquired, modeled and interpreted. The system deployed was SkyTEM, a time-domain helicopter electromagnetic system designed for hydrogeophysical, environmental and mineral investigations. The AEM data provide, after data acquisition, analysis, processing, and modeling, a distribution volume of electrical resistivity, spanning an investigation depth from ground surface of few hundred meters, depending on resistivity condition. Resistivity is an important physical parameter for geothermal investigation, since it proved to be very effective in mapping anomalies due to hydrothermal fluid circulation, which usually has high salt content and produces clayey alteration minerals. Since the project required, among other issues, to define geothermal resources at shallow level, it was decided to perform a test with an airborne electromagnetic geophysical survey, to verify the advantages offered by the system in covering large areas in a short time. The geophysical survey was carried out in Sicily, Italy, in late 2011, over two test sites named "Termini" and "Western Sicily". The two areas were chosen on different basis. "Termini" area is covered by extensive geological surveys, and was going to be investigated also by means of electrical tomography in its northern part. Since geological condition of Sicily, even at shallow depth, is very complex, this area provided a good place for defining the resistivity values of the main geological units outcropping in the region. "Termini" survey has been also an occasion to define relations between resistivity distribution, lithological units and thermal conductivity. The "Western Sicily" area cover the main thermal manifestations of western Sicily, and the research target was to establish whether they are characterized by common hydrogeological or tectonic features that could be mapped by resistivity

  3. Development of the Emergency Medical Services Role Identity Scale (EMS-RIS).

    PubMed

    Donnelly, Elizabeth A; Siebert, Darcy; Siebert, Carl

    2015-01-01

    This article describes the development and validation of the theoretically grounded Emergency Medical Services Role Identity Scale (EMS-RIS), which measures four domains of EMS role identity. The EMS-RIS was developed using a mixed methods approach. Key informants informed item development and the scale was validated using a representative probability sample of EMS personnel. Factor analyses revealed a conceptually consistent, four-factor solution with sound psychometric properties as well as evidence of convergent and discriminant validities. Social workers work with EMS professionals in crisis settings and as their counselors when they are distressed. The EMS-RIS provides useful information for the assessment of and intervention with distressed EMS professionals, as well as how role identity may influence occupational stress. PMID:25760489

  4. Nonlinear Smoothing and the EM Algorithm for Positive Integral Equations of the First Kind

    SciTech Connect

    Eggermont, P. P. B.

    1999-01-15

    We study a modification of the EMS algorithm in which each step of the EMS algorithm is preceded by a nonlinear smoothing step of the form Nf-exp(S*log f) , where S is the smoothing operator of the EMS algorithm. In the context of positive integral equations (a la positron emission tomography) the resulting algorithm is related to a convex minimization problem which always admits a unique smooth solution, in contrast to the unmodified maximum likelihood setup. The new algorithm has slightly stronger monotonicity properties than the original EM algorithm. This suggests that the modified EMS algorithm is actually an EM algorithm for the modified problem. The existence of a smooth solution to the modified maximum likelihood problem and the monotonicity together imply the strong convergence of the new algorithm. We also present some simulation results for the integral equation of stereology, which suggests that the new algorithm behaves roughly like the EMS algorithm.

  5. The B and Be States of the Star EM Cepheus

    NASA Astrophysics Data System (ADS)

    Kjurkchieva, Diana; Marchev, Dragomir; Sigut, T. A. A.; Dimitrov, Dinko

    2016-09-01

    We present 11 yr of high-resolution, spectroscopic observations for the star EM Cep. EM Cep switches between B and Be star states, as revealed by the level of Hα emission, but spends most of its time in the B star state. EM Cep has been considered to be an eclipsing, near-contact binary of nearly equal-mass B stars in order to reproduce regular photometric variations; however, this model is problematic due to the lack of any observed Doppler shift in the spectrum. Our observations confirm that there are no apparent Doppler shifts in the wide spectral lines Hα and He i λ6678 in either the B or Be star states. The profiles of He i λ6678 typically exhibited a filled-in absorption core, but we detected weak emission in this line during the highest Be state. Given the lack of observed Doppler shifts, we model EM Cep as an isolated Be star with a variable circumstellar disk. We can reproduce the observed Hα emission profiles over the 11 yr period reasonably well with disk masses on the order of 3{--}10× {10}-11 {M}* in the Be state with the circumstellar disk seen at an inclination of 78° to the line of sight. From a disk ejection episode in 2014, we estimate a mass-loss rate of ≈ 3× {10}-9 {M}ȯ {{yr}}-1. The derived disk density parameters are typical of those found for the classical Be stars. We therefore suggest that the EM Cep is a classical Be star and that its photometric variations are the result of β Cep or nonradial pulsations.

  6. GPS computer navigators to shorten EMS response and transport times.

    PubMed

    Ota, F S; Muramatsu, R S; Yoshida, B H; Yamamoto, L G

    2001-05-01

    GPS (global positioning satellite system to determine one's position on earth) units have become inexpensive and compact. The purpose of this study is to assess the effectiveness of a GPS enhanced computer street map navigator to improve the ability of EMS drivers in an urban setting to locate their destination and shorten response times. For part I, residential addresses in the city were randomly selected from a telephone directory. Two driver/navigator teams were assigned to drive to the address adhering to speed limits. One team used a standard street map, whereas the other team used a GPS computer navigator. The travel time and distance of the runs were compared. For part II, the computer GPS navigator was placed on an ambulance to supplement their normal methods of navigation to find the address requesting EMS. After the run was completed, EMS providers were interviewed to determine their opinion of whether the GPS navigator was helpful. For part I the results showed that in the 29 initial test runs, comparing the GPS team versus the standard map team, the mean distances traveled were 8.7 versus 9.0 kilometers (not significant) and the mean travel times were 13.5 versus 14.6 minutes (P=.02), respectively. The GPS team arrived faster in 72% runs. For part II the results showed that most EMS providers surveyed noted that the GPS computer navigator enhanced their ability to find the destination and all EMS providers acknowledged that it would enhance their ability to find a destination in an area in which they were unfamiliar. These results suggest that a portable GPS computer navigator system is helpful and can enhance the ability of prehospital care providers to locate their destination. Because these units are accurate and inexpensive, GPS computer navigators may be a valuable tool in reducing pre-hospital transport times. PMID:11326345

  7. Similarity-regulation of OS-EM for accelerated SPECT reconstruction.

    PubMed

    Vaissier, P E B; Beekman, F J; Goorden, M C

    2016-06-01

    Ordered subsets expectation maximization (OS-EM) is widely used to accelerate image reconstruction in single photon emission computed tomography (SPECT). Speedup of OS-EM over maximum likelihood expectation maximization (ML-EM) is close to the number of subsets used. Although a high number of subsets can shorten reconstruction times significantly, it can also cause severe image artifacts such as improper erasure of reconstructed activity if projections contain few counts. We recently showed that such artifacts can be prevented by using a count-regulated OS-EM (CR-OS-EM) algorithm which automatically adapts the number of subsets for each voxel based on the estimated number of counts that the voxel contributed to the projections. While CR-OS-EM reached high speed-up over ML-EM in high-activity regions of images, speed in low-activity regions could still be very slow. In this work we propose similarity-regulated OS-EM (SR-OS-EM) as a much faster alternative to CR-OS-EM. SR-OS-EM also automatically and locally adapts the number of subsets, but it uses a different criterion for subset regulation: the number of subsets that is used for updating an individual voxel depends on how similar the reconstruction algorithm would update the estimated activity in that voxel with different subsets. Reconstructions of an image quality phantom and in vivo scans show that SR-OS-EM retains all of the favorable properties of CR-OS-EM, while reconstruction speed can be up to an order of magnitude higher in low-activity regions. Moreover our results suggest that SR-OS-EM can be operated with identical reconstruction parameters (including the number of iterations) for a wide range of count levels, which can be an additional advantage from a user perspective since users would only have to post-filter an image to present it at an appropriate noise level. PMID:27206135

  8. Similarity-regulation of OS-EM for accelerated SPECT reconstruction

    NASA Astrophysics Data System (ADS)

    Vaissier, P. E. B.; Beekman, F. J.; Goorden, M. C.

    2016-06-01

    Ordered subsets expectation maximization (OS-EM) is widely used to accelerate image reconstruction in single photon emission computed tomography (SPECT). Speedup of OS-EM over maximum likelihood expectation maximization (ML-EM) is close to the number of subsets used. Although a high number of subsets can shorten reconstruction times significantly, it can also cause severe image artifacts such as improper erasure of reconstructed activity if projections contain few counts. We recently showed that such artifacts can be prevented by using a count-regulated OS-EM (CR-OS-EM) algorithm which automatically adapts the number of subsets for each voxel based on the estimated number of counts that the voxel contributed to the projections. While CR-OS-EM reached high speed-up over ML-EM in high-activity regions of images, speed in low-activity regions could still be very slow. In this work we propose similarity-regulated OS-EM (SR-OS-EM) as a much faster alternative to CR-OS-EM. SR-OS-EM also automatically and locally adapts the number of subsets, but it uses a different criterion for subset regulation: the number of subsets that is used for updating an individual voxel depends on how similar the reconstruction algorithm would update the estimated activity in that voxel with different subsets. Reconstructions of an image quality phantom and in vivo scans show that SR-OS-EM retains all of the favorable properties of CR-OS-EM, while reconstruction speed can be up to an order of magnitude higher in low-activity regions. Moreover our results suggest that SR-OS-EM can be operated with identical reconstruction parameters (including the number of iterations) for a wide range of count levels, which can be an additional advantage from a user perspective since users would only have to post-filter an image to present it at an appropriate noise level.

  9. Magen David Adom--the EMS in Israel.

    PubMed

    Ellis, Daniel Y; Sorene, Eliot

    2008-01-01

    Israel is a small country with a population of around 7 million. The sole EMS provider for Israel is Magen David Adom (MDA) (translated as 'Red Shield of David'). MDA also carries out the functions of a National Society (similar to the Red Cross) and provides all the blood and blood product services for the country. Nationwide, the organisation responds to over 1000 emergency calls a day and uses doctors, paramedics, emergency medical technicians and volunteers. Local geopolitics has meant that MDA has to be prepared for anything from everyday emergency calls to suicide bombings and regional wars. MDA also prides itself in being able to rapidly assemble and dispatch mobile aid teams to scenes of international disasters. Such a broad range of activities is unusual for a single EMS organisation. PMID:17767990

  10. Service Discovery Framework Supported by EM Algorithm and Bayesian Classifier

    NASA Astrophysics Data System (ADS)

    Peng, Yanbin

    Service oriented computing has become the main stream research field nowadays. Meanwhile, machine learning is a promising AI technology which can enhance the performance of traditional algorithm. Therefore, aiming at solving service discovery problem, this paper imports Bayesian classifier to web service discovery framework, which can improve service querying speed. In this framework, services in service library become training set of Bayesian classifier, service query becomes a testing sample. Service matchmaking process can be executed in related service class, which has fewer services, thus can save time. Due to don't know the class of service in training set, EM algorithm is used to estimate prior probability and likelihood functions. Experiment results show that the EM algorithm and Bayesian classifier supported method outperforms other methods in time complexity.

  11. Environmental Restoration and Waste Management (EM) program: An introduction

    SciTech Connect

    Not Available

    1990-12-01

    This booklet introduces the reader to the mission and functions of a major new unit within the US Department of Energy (DOE): the Office of Environmental Restoration and Waste Management (EM). The Secretary of Energy established EM in November 1989, implementing a central purpose of DOE's first annual Environmental Restoration and Waste Management Five-Year Plan, which had appeared three months earlier. The contents of this booklet, and their arrangement, reflect the annual update of the Five-Year Plan. The Five-Year Plan supports DOE's strategy for meeting its 30-year compliance and cleanup goal. This strategy involves: focusing DOE's activities on eliminating or reducing known or recognized potential risks to worker and public health and the environment, containing or isolating, removing, or detoxifying onsite and offsite contamination, and developing technology to achieve DOE's environmental goals.

  12. Superconducting Electromagnetic Suspension (EMS) system for Grumman Maglev concept

    NASA Technical Reports Server (NTRS)

    Kalsi, Swarn S.

    1994-01-01

    The Grumman developed Electromagnetic Suspension (EMS) Maglev system has the following key characteristics: a large operating airgap--40 mm; levitation at all speeds; both high speed and low speed applications; no deleterious effects on SC coils at low vehicle speeds; low magnetic field at the SC coil--less than 0.35 T; no need to use non-magnetic/non-metallic rebar in the guideway structure; low magnetic field in passenger cabin--approximately 1 G; low forces on the SC coil; employs state-of-the-art NbTi wire; no need for an active magnet quench protection system; and lower weight than a magnet system with copper coils. The EMS Maglev described in this paper does not require development of any new technologies. The system could be built with the existing SC magnet technology.

  13. Generalized single-particle cryo-EM--a historical perspective.

    PubMed

    Frank, Joachim

    2016-02-01

    This is a brief account of the earlier history of single-particle cryo-EM of biological molecules lacking internal symmetry, which goes back to the mid-seventies. The emphasis of this review is on the mathematical concepts and computational approaches. It is written as the field experiences a turning point in the wake of the introduction of digital cameras capable of single electron counting, and near-atomic resolution can be reached even for smaller molecules. PMID:26566976

  14. EMS-STARS: Emergency Medical Services "Superuser" Transport Associations: An Adult Retrospective Study.

    PubMed

    Hall, M Kennedy; Raven, Maria C; Hall, Jane; Yeh, Clement; Allen, Elaine; Rodriguez, Robert M; Tangherlini, Niels L; Sporer, Karl A; Brown, John F

    2015-01-01

    Abstract Objective. Emergency medical services (EMS) "superusers" -those who use EMS services at extremely high rates -have not been well characterized. Recent interest in the small group of individuals who account for a disproportionate share of health-care expenditures has led to research on frequent users of emergency departments and other health services, but little research has been done regarding those who use EMS services. To inform policy and intervention implementation, we undertook a descriptive analysis of EMS superusers in a large urban community. In this paper we compare EMS superusers to low, moderate, and high users to characterize factors contributing to EMS use. We also estimate the financial impact of EMS superusers. Methods. We conducted a retrospective cross-sectional study based on 1 year of data from an urban EMS system. Data for all EMS encounters with patients age ≥18 years were extracted from electronic records generated on scene by paramedics. We identified demographic and clinical variables associated with levels of EMS use. EMS users were characterized by the annual number of EMS encounters: low (1), moderate (2-4), high (5-14), and superusers (≥15). In addition, we performed a financial analysis using San Francisco Fire Department (SFFD) 2009 charge and reimbursement data. Results. A total of 31,462 adults generated 43,559 EMS ambulance encounters, which resulted in 39,107 transports (a 90% transport rate). Encounters for general medical reasons were common among moderate and high users and less frequent among superusers and low users, while alcohol use was exponentially correlated with encounter frequency. Superusers were significantly younger than moderate EMS users, and more likely to be male. The superuser group created a significantly higher financial burden/person than any other group, comprising 0.3% of the study population, but over 6% of annual EMS charges and reimbursements. Conclusions. In this retrospective study, adult

  15. Improving EM&V for Energy Efficiency Programs (Fact Sheet)

    SciTech Connect

    Not Available

    2012-07-01

    This fact sheet describes the objectives of the U.S. Department of Energy Uniform Methods Project to bring consistency to energy savings calculations in U.S. energy efficiency programs. The U.S. Department of Energy (DOE) is developing a framework and a set of protocols for determining gross energy savings from energy efficiency measures and programs. The protocols represent a refinement of the body of knowledge supporting energy efficiency evaluation, measurement, and verification (EM&V) activities. They have been written by technical experts within the field and reviewed by industry experts. Current EM&V practice allows for multiple methods for calculating energy savings. These methods were developed to meet the needs of energy efficiency program administrators and regulators. Although they served their original objectives well, they have resulted in inconsistent and incomparable savings results - even for identical measures. The goal of the Uniform Methods Project is to strengthen the credibility of energy savings determinations by improving EM&V, increasing the consistency and transparency of how energy savings are determined.

  16. The US DOE-EM International Program - 13004

    SciTech Connect

    Elmetti, Rosa R.; Han, Ana M.; Williams, Alice C.

    2013-07-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eight international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into FY 2013 and beyond. (authors)

  17. Modeling of MHD edge containment in strip casting with ELEKTRA and CaPS-EM codes

    SciTech Connect

    Chang, F. C.

    2000-01-12

    This paper presents modeling studies of magnetohydrodynamics analysis in twin-roll casting. Argonne National Laboratory (ANL) and ISPAT Inland Inc. (Inland), formerly Inland Steel Co., have worked together to develop a three-dimensional (3-D) computer model that can predict eddy currents, fluid flows, and liquid metal containment of an electromagnetic (EM) edge containment device. The model was verified by comparing predictions with experimental results of liquid metal containment and fluid flow in EM edge dams (EMDs) that were designed at Inland for twin-roll casting. This mathematical model can significantly shorten casting research on the use of EM fields for liquid metal containment and control. The model can optimize the EMD design so it is suitable for application, and minimize expensive time-consuming full-scale testing. Numerical simulation was performed by coupling a 3-D finite-element EM code (ELEKTRA) and a 3-D finite-difference fluids code (CaPS-EM) to solve heat transfer, fluid flow, and turbulence transport in a casting process that involves EM fields. ELEKTRA can predict the eddy-current distribution and the EM forces in complex geometries. CaPS-EM can model fluid flows with free surfaces. The computed 3-D magnetic fields and induced eddy currents in ELEKTRA are used as input to temperature- and flow-field computations in CaPS-EM. Results of the numerical simulation compared well with measurements obtained from both static and dynamic tests.

  18. Volta phase plate cryo-EM of the small protein complex Prx3.

    PubMed

    Khoshouei, Maryam; Radjainia, Mazdak; Phillips, Amy J; Gerrard, Juliet A; Mitra, Alok K; Plitzko, Jürgen M; Baumeister, Wolfgang; Danev, Radostin

    2016-01-01

    Cryo-EM of large, macromolecular assemblies has seen a significant increase in the numbers of high-resolution structures since the arrival of direct electron detectors. However, sub-nanometre resolution cryo-EM structures are rare compared with crystal structure depositions, particularly for relatively small particles (<400 kDa). Here we demonstrate the benefits of Volta phase plates for single-particle analysis by time-efficient cryo-EM structure determination of 257 kDa human peroxiredoxin-3 dodecamers at 4.4 Å resolution. The Volta phase plate improves the applicability of cryo-EM for small molecules and accelerates structure determination. PMID:26817416

  19. Standard errors for EM estimates in generalized linear models with random effects.

    PubMed

    Friedl, H; Kauermann, G

    2000-09-01

    A procedure is derived for computing standard errors of EM estimates in generalized linear models with random effects. Quadrature formulas are used to approximate the integrals in the EM algorithm, where two different approaches are pursued, i.e., Gauss-Hermite quadrature in the case of Gaussian random effects and nonparametric maximum likelihood estimation for an unspecified random effect distribution. An approximation of the expected Fisher information matrix is derived from an expansion of the EM estimating equations. This allows for inferential arguments based on EM estimates, as demonstrated by an example and simulations. PMID:10985213

  20. Volta phase plate cryo-EM of the small protein complex Prx3

    NASA Astrophysics Data System (ADS)

    Khoshouei, Maryam; Radjainia, Mazdak; Phillips, Amy J.; Gerrard, Juliet A.; Mitra, Alok K.; Plitzko, Jürgen M.; Baumeister, Wolfgang; Danev, Radostin

    2016-01-01

    Cryo-EM of large, macromolecular assemblies has seen a significant increase in the numbers of high-resolution structures since the arrival of direct electron detectors. However, sub-nanometre resolution cryo-EM structures are rare compared with crystal structure depositions, particularly for relatively small particles (<400 kDa). Here we demonstrate the benefits of Volta phase plates for single-particle analysis by time-efficient cryo-EM structure determination of 257 kDa human peroxiredoxin-3 dodecamers at 4.4 Å resolution. The Volta phase plate improves the applicability of cryo-EM for small molecules and accelerates structure determination.

  1. Covariance Matrix Estimation for the Cryo-EM Heterogeneity Problem*

    PubMed Central

    Katsevich, E.; Katsevich, A.; Singer, A.

    2015-01-01

    In cryo-electron microscopy (cryo-EM), a microscope generates a top view of a sample of randomly oriented copies of a molecule. The problem of single particle reconstruction (SPR) from cryo-EM is to use the resulting set of noisy two-dimensional projection images taken at unknown directions to reconstruct the three-dimensional (3D) structure of the molecule. In some situations, the molecule under examination exhibits structural variability, which poses a fundamental challenge in SPR. The heterogeneity problem is the task of mapping the space of conformational states of a molecule. It has been previously suggested that the leading eigenvectors of the covariance matrix of the 3D molecules can be used to solve the heterogeneity problem. Estimating the covariance matrix is challenging, since only projections of the molecules are observed, but not the molecules themselves. In this paper, we formulate a general problem of covariance estimation from noisy projections of samples. This problem has intimate connections with matrix completion problems and high-dimensional principal component analysis. We propose an estimator and prove its consistency. When there are finitely many heterogeneity classes, the spectrum of the estimated covariance matrix reveals the number of classes. The estimator can be found as the solution to a certain linear system. In the cryo-EM case, the linear operator to be inverted, which we term the projection covariance transform, is an important object in covariance estimation for tomographic problems involving structural variation. Inverting it involves applying a filter akin to the ramp filter in tomography. We design a basis in which this linear operator is sparse and thus can be tractably inverted despite its large size. We demonstrate via numerical experiments on synthetic datasets the robustness of our algorithm to high levels of noise. PMID:25699132

  2. Perda de massa em ventos empoeirados de estrelas supergigantes

    NASA Astrophysics Data System (ADS)

    Vidotto, A. A.; Jatenco-Pereira, V.

    2003-08-01

    Em praticamente todas as regiões do diagrama HR, as estrelas apresentam evidências observacionais de perda de massa. Na literatura, pode-se encontrar trabalhos que tratam tanto do diagnóstico da perda de massa como da construção de modelos que visam explicá-la. O amortecimento de ondas Alfvén tem sido utilizado como mecanismo de aceleração de ventos homogêneos. Entretanto, sabe-se que os envelopes de estrelas frias contêm grãos sólidos e moléculas. Com o intuito de estudar a interação entre as ondas Alfvén e a poeira e a sua conseqüência na aceleração do vento estelar, Falceta-Gonçalves & Jatenco-Pereira (2002) desenvolveram um modelo de perda de massa para estrelas supergigantes. Neste trabalho, apresentamos um estudo do modelo acima proposto para avaliar a dependência da taxa de perda de massa com alguns parâmetros iniciais como, por exemplo, a densidade r0, o campo magnético B0, o comprimento de amortecimento da onda L0, seu fluxo f0, entre outros. Sendo assim, aumentando f0 de 10% a partir de valores de referência, vimos que aumenta consideravelmente, enquanto que um aumento de mesmo valor em r0, B0 e L0 acarreta uma diminuição em .

  3. EM-21 Retrieval Knowledge Center: Waste Retrieval Challenges

    SciTech Connect

    Fellinger, Andrew P.; Rinker, Michael W.; Berglin, Eric J.; Minichan, Richard L.; Poirier, Micheal R.; Gauglitz, Phillip A.; Martin, Bruce A.; Hatchell, Brian K.; Saldivar, Eloy; Mullen, O Dennis; Chapman, Noel F.; Wells, Beric E.; Gibbons, Peter W.

    2009-04-10

    EM-21 is the Waste Processing Division of the Office of Engineering and Technology, within the U.S. Department of Energy’s (DOE) Office of Environmental Management (EM). In August of 2008, EM-21 began an initiative to develop a Retrieval Knowledge Center (RKC) to provide the DOE, high level waste retrieval operators, and technology developers with centralized and focused location to share knowledge and expertise that will be used to address retrieval challenges across the DOE complex. The RKC is also designed to facilitate information sharing across the DOE Waste Site Complex through workshops, and a searchable database of waste retrieval technology information. The database may be used to research effective technology approaches for specific retrieval tasks and to take advantage of the lessons learned from previous operations. It is also expected to be effective for remaining current with state-of-the-art of retrieval technologies and ongoing development within the DOE Complex. To encourage collaboration of DOE sites with waste retrieval issues, the RKC team is co-led by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL). Two RKC workshops were held in the Fall of 2008. The purpose of these workshops was to define top level waste retrieval functional areas, exchange lessons learned, and develop a path forward to support a strategic business plan focused on technology needs for retrieval. The primary participants involved in these workshops included retrieval personnel and laboratory staff that are associated with Hanford and Savannah River Sites since the majority of remaining DOE waste tanks are located at these sites. This report summarizes and documents the results of the initial RKC workshops. Technology challenges identified from these workshops and presented here are expected to be a key component to defining future RKC-directed tasks designed to facilitate tank waste retrieval solutions.

  4. EM Modelling of RF Propagation Through Plasma Plumes

    NASA Astrophysics Data System (ADS)

    Pandolfo, L.; Bandinelli, M.; Araque Quijano, J. L.; Vecchi, G.; Pawlak, H.; Marliani, F.

    2012-05-01

    Electric propulsion is a commercially attractive solution for attitude and position control of geostationary satellites. Hall-effect ion thrusters generate a localized plasma flow in the surrounding of the satellite, whose impact on the communication system needs to be qualitatively and quantitatively assessed. An electromagnetic modelling tool has been developed and integrated into the Antenna Design Framework- ElectroMagnetic Satellite (ADF-EMS). The system is able to guide the user from the plume definition phases through plume installation and simulation. A validation activity has been carried out and the system has been applied to the plume modulation analysis of SGEO/Hispasat mission.

  5. A compulsator driven rapid-fire EM-gun

    SciTech Connect

    Pratap, S.B.; Bird, W.L.

    1984-03-01

    A compulsator-driven railgun is an attractive alternative to the homopolar generator-inductor-switch configuration, especially for repetitive duty. A conceptual design of a rapid-fire EM-gun system is presented. The generator is sized to accelerate a 0.08-kg projectile to 2 to 3 km/s at a 60 pulse-per-second repetition rate. Initial design parameters are discussed, and example current and velocity waveforms are given. The generator is discharged at the proper phase angle to provide a current zero just as the projectile exits the muzzle of the railgun.

  6. Single-particle cryo-EM at crystallographic resolution

    PubMed Central

    Cheng, Yifan

    2015-01-01

    Until only a few years ago, single-particle electron cryo-microscopy (cryo-EM) was usually not the first choice for many structural biologists due to its limited resolution in the range of nanometer to subnanometer. Now, this method rivals X-ray crystallography in terms of resolution and can be used to determine atomic structures of macromolecules that are either refractory to crystallization or difficult to crystallize in specific functional states. In this review, I discuss the recent breakthroughs in both hardware and software that transformed cryo-microscopy, enabling understanding of complex biomolecules and their functions at atomic level. PMID:25910205

  7. Developing State and National Evaluation Infrastructures- Guidance for the Challenges and Opportunities of EM&V

    SciTech Connect

    Schiller, Steven R.; Goldman, Charles A.

    2011-06-24

    Evaluating the impacts and effectiveness of energy efficiency programs is likely to become increasingly important for state policymakers and program administrators given legislative mandates and regulatory goals and increasing reliance on energy efficiency as a resource. In this paper, we summarize three activities that the authors have conducted that highlight the expanded role of evaluation, measurement and verification (EM&V): a study that identified and analyzed challenges in improving and scaling up EM&V activities; a scoping study that identified issues involved in developing a national efficiency EM&V standard; and lessons learned from providing technical assistance on EM&V issues to states that are ramping up energy efficiency programs. The lessons learned are summarized in 13 EM&V issues that policy makers should address in each jurisdiction and which are listed and briefly described. The paper also discusses how improving the effectiveness and reliability of EM&V will require additional capacity building, better access to existing EM&V resources, new methods to address emerging issues and technologies, and perhaps foundational documents and approaches to improving the credibility and cross jurisdictional comparability of efficiency investments. Two of the potential foundational documents discussed are a national EM&V standard or resource guide and regional deemed savings and algorithm databases.

  8. EMS Instructor Training Program. National Standard Curriculum. Instructor Guide. Student Guide.

    ERIC Educational Resources Information Center

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    This guide for teaching a course to prepare emergency medical service (EMS) trainers focuses on the skills necessary to present any of the Department of Transportation (DOT), National Highway Traffic Safety Administration (NHTSA) EMS courses. Course topics are as follows: (1) introduction; (2) instructor roles and responsibilities; (3) legal…

  9. Method for evaluating compatibility of commercial electromagnetic (EM) microsensor tracking systems with surgical and imaging tables

    NASA Astrophysics Data System (ADS)

    Nafis, Christopher; Jensen, Vern; von Jako, Ron

    2008-03-01

    Electromagnetic (EM) tracking systems have been successfully used for Surgical Navigation in ENT, cranial, and spine applications for several years. Catheter sized micro EM sensors have also been used in tightly controlled cardiac mapping and pulmonary applications. EM systems have the benefit over optical navigation systems of not requiring a line-of-sight between devices. Ferrous metals or conductive materials that are transient within the EM working volume may impact tracking performance. Effective methods for detecting and reporting EM field distortions are generally well known. Distortion compensation can be achieved for objects that have a static spatial relationship to a tracking sensor. New commercially available micro EM tracking systems offer opportunities for expanded image-guided navigation procedures. It is important to know and understand how well these systems perform with different surgical tables and ancillary equipment. By their design and intended use, micro EM sensors will be located at the distal tip of tracked devices and therefore be in closer proximity to the tables. Our goal was to define a simple and portable process that could be used to estimate the EM tracker accuracy, and to vet a large number of popular general surgery and imaging tables that are used in the United States and abroad.

  10. The Relationship between the Bock-Aitkin Procedure and the EM Algorithm for IRT Model Estimation.

    ERIC Educational Resources Information Center

    Hsu, Yaowen; Ackerman, Terry A.; Fan, Meichu

    It has previously been shown that the Bock-Aitkin procedure (R. Bock and M. Aitkin, 1981) is an instance of the EM algorithm when trying to find the marginal maximum likelihood estimate for a discrete latent ability variable (latent trait). In this paper, it is shown that the Bock-Aitkin procedure is a numerical implementation of the EM algorithm…

  11. Global Convergence of the EM Algorithm for Unconstrained Latent Variable Models with Categorical Indicators

    ERIC Educational Resources Information Center

    Weissman, Alexander

    2013-01-01

    Convergence of the expectation-maximization (EM) algorithm to a global optimum of the marginal log likelihood function for unconstrained latent variable models with categorical indicators is presented. The sufficient conditions under which global convergence of the EM algorithm is attainable are provided in an information-theoretic context by…

  12. Covariance Structure Model Fit Testing under Missing Data: An Application of the Supplemented EM Algorithm

    ERIC Educational Resources Information Center

    Cai, Li; Lee, Taehun

    2009-01-01

    We apply the Supplemented EM algorithm (Meng & Rubin, 1991) to address a chronic problem with the "two-stage" fitting of covariance structure models in the presence of ignorable missing data: the lack of an asymptotically chi-square distributed goodness-of-fit statistic. We show that the Supplemented EM algorithm provides a convenient…

  13. Signaling of cell fate determination by the TPD1 small protein and EMS1 receptor kinase

    PubMed Central

    Jia, Gengxiang; Liu, Xiaodong; Owen, Heather A.; Zhao, Dazhong

    2008-01-01

    Sexual reproduction requires the specification of cells with distinct fates in plants and animals. The EMS1 (also known as EXS) leucine-rich repeat receptor-like kinase (LRR-RLK) and TPD1 small protein play key roles in regulating somatic and reproductive cell fate determination in Arabidopsis anthers. Here, we show that ectopic expression of TPD1 causes abnormal differentiation of somatic and reproductive cells in anthers. In addition, ectopic TPD1 activity requires functional EMS1. Yeast two-hybrid, pull-down, and coimmunoprecipitation analyses further demonstrate that TPD1 interacts with EMS1 in vitro and in vivo. Moreover, TPD1 induces EMS1 phosphorylation in planta. Thus, our results suggest that TPD1 serves as a ligand for the EMS1 receptor kinase to signal cell fate determination during plant sexual reproduction. PMID:18250314

  14. A Generalized Fast Frequency Sweep Algorithm for Coupled Circuit-EM Simulations

    SciTech Connect

    Rockway, J D; Champagne, N J; Sharpe, R M; Fasenfest, B

    2004-01-14

    Frequency domain techniques are popular for analyzing electromagnetics (EM) and coupled circuit-EM problems. These techniques, such as the method of moments (MoM) and the finite element method (FEM), are used to determine the response of the EM portion of the problem at a single frequency. Since only one frequency is solved at a time, it may take a long time to calculate the parameters for wideband devices. In this paper, a fast frequency sweep based on the Asymptotic Wave Expansion (AWE) method is developed and applied to generalized mixed circuit-EM problems. The AWE method, which was originally developed for lumped-load circuit simulations, has recently been shown to be effective at quasi-static and low frequency full-wave simulations. Here it is applied to a full-wave MoM solver, capable of solving for metals, dielectrics, and coupled circuit-EM problems.

  15. AVALIAÇÃO DA PRESENÇA DE ENDOSSIMBIONTES Cardinium em DIFERENTES ESPÉCIES DE ARTRÓPODES.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A presença de endossimbiontes do gênero Cardinium em alguns grupos de artrópodes foi recentemente relatada e relacionada com diversas alterações reprodutivas em seus hospedeiros, tais como feminilização de ácaros, partenogênese em parasitóides, incompatibilidade citoplasmática e aumento da fecundida...

  16. Aristarchus's <em>On the Sizes and Distances of the Sun and the Moonem>: Greek and Arabic Texts

    NASA Astrophysics Data System (ADS)

    Berggren, J. L.; Sidoli, N.

    2007-05-01

    In the 1920s, T. L. Heath pointed out that historians of mathematics have "given too little attention to Aristarchus". This is still true today. The Greek text of Aristarchus's On the Sizes and Distances of the Sun and the Moonem> has received little attention; the Arabic editions virtually none. Much of what this text has to tell us about ancient and medieval mathematics and the mathematical sciences has gone unnoticed. It should be taken as an important source for our understanding of the mathematical sciences of the early Hellenistic period.

  17. The EM fields in the Solid Generated by a Fault in a Porous Region

    NASA Astrophysics Data System (ADS)

    Ren, H.; Huang, Q.; Chen, X.

    2015-12-01

    Electrokinetic effect, as one of the most possible generation mechanisms of the seismo-electromagnetic phenomenons associated with natural earthquakes, has interested many researchers. Besides, it is also considered as a potential tool for the water/oil exploration. Recently, we numerically investigated the electromagnetic (EM) fields due to the electrokinetic effect in mixed layered model. The mixed model comprises not only porous layers but also solid layers. We firstly tested a two-layer mixed model. The numerical results show that, in addition to the radiation EM fields, another kind of evanescent EM fields can be generated by the seismic waves arriving at the interface with incident angles greater the critical angle. The evanescent EM fields decay faster than the radiation EM fields when getting away from the interface. For the seismic frequency band, the evanescent EM fields in the solid are still measurable at a distance of, e.g., 2km to the interface. We then tested a eight-layer mixed model. The top and bottom layers are solid and the other layers are porous. A finite fault of 20x10km is located in the porous region. The focal depth is 8km. The applied source time function is a ramp fuction with an arise time of 0.8s. Point stacking method was used to compute the wave-fields caused by the finite fault. Our nuemrical results show that, this model can generate the EM fields before the arrival of seismic waves as well as the residual EM fields. Both the two kinds of EM fields have been observed in field observations. There is a possibility that the anomalous EM activities before big earthquakes may be caused by the fluid flow in the shallow Earth as a result of the stress changes.

  18. Chapter 19: HVAC Controls (DDC/EMS/BAS) Evaluation Protocol

    SciTech Connect

    Romberger, J.

    2014-11-01

    The HVAC Controls Evaluation Protocol is designed to address evaluation issues for direct digital controls/energy management systems/building automation systems (DDC/EMS/BAS) that are installed to control heating, ventilation, and air-conditioning (HVAC) equipment in commercial and institutional buildings. (This chapter refers to the DDC/EMS/BAS measure as HVAC controls.) This protocol may also be applicable to industrial facilities such as clean rooms and labs, which have either significant HVAC equipment or spaces requiring special environmental conditions. This protocol addresses only HVAC-related equipment and the energy savings estimation methods associated with installing such control systems as an energy efficiency measure. The affected equipment includes: Air-side equipment (air handlers, direct expansion systems, furnaces, other heating- and cooling-related devices, terminal air distribution equipment, and fans); Central plant equipment (chillers, cooling towers, boilers, and pumps). These controls may also operate or affect other end uses, such as lighting, domestic hot water, irrigation systems, and life safety systems such as fire alarms and other security systems. Considerable nonenergy benefits, such as maintenance scheduling, system component troubleshooting, equipment failure alarms, and increased equipment lifetime, may also be associated with these systems. When connected to building utility meters, these systems can also be valuable demand-limiting control tools. However, this protocol does not evaluate any of these additional capabilities and benefits.

  19. Review of selected oceanic EM/EO scattering problems

    NASA Astrophysics Data System (ADS)

    Haller, Merrick C.

    2010-02-01

    Electromagnetic and electro-optical (EM/EO) propagation and scattering in the ocean is of interest for a wide range of science problems. For example, the biological productivity of ocean waters through photochemical processes is governed by the vertical attenuation of solar radiation. Also, EO scattering theory is the primary basis for determining biogeochemical parameters (e.g. phytoplankton, suspended sediments, and dissolved matter) from the water leaving optical radiance. In addition, EO scattering from suspended sediments and bubbles is the limiting factor for active lidar systems used to map the sea bottom. This work will review specific applications of EO/EM scattering theory with regard to the influence of bubbles and droplets on remote sensing in the nearshore ocean. The current state of understanding concerning models and applications for optical scattering from bubbles in the water column as well as microwave scattering from water droplets produced by breaking waves at the ocean surface will be discussed as well as future research directions.

  20. The Search for Gravitational Wave EM Counterparts with Swift

    NASA Astrophysics Data System (ADS)

    Kennea, Jamie; Evans, Phil; Swift GW follow-up Team

    2016-04-01

    We present the plan to search for electromagnetic counterparts of Gravitational Waves (GWs) discovered during the current and upcoming runs of the LIGO and Virgo detectors. As we enter a period where the sensitivity of the current generation of GW detectors approaches a high probability of the first detection of a real GW signal, confirmation of the reality of these triggers will be greatly improved if an EM counterpart can be found. Swift’s ability to rapidly respond to high priority target-of-opportunity observations, it’s multi-wavelength capabilities and low overhead observing make it a seemingly ideal follow-up facility. However comparing the size of the expected GW error regions with the fields of view of the Swift XRT and UVOT telescopes, we find that covering the large GW error regions would require a unreasonably large number of pointings. We present our method of meeting this challenge, by both reducing the problem using Galaxy targeting, and by operating Swift in an entirely new way in order to cover the still large number of fields needed to chase down the EM counterpart before it disappears.

  1. Contactless ultrasonic treatment of melts using EM induction

    NASA Astrophysics Data System (ADS)

    Bojarevics, V.; Djambazov, G.; Lebon, G. S. B.; Pericleous, K. A.

    2015-06-01

    Ultrasound Treatment (UT) is commonly used in light alloys during solidification to refine microstructure, or disperse immersed particles. A sonotrode probe introduced into the melt generates sound waves that are strong enough to produce cavitation of dissolved gases. The same method cannot be used in high temperature melts, or for highly reactive alloys, due to probe erosion and melt contamination. An alternative, contactless method of generating sound waves is proposed and investigated theoretically in this paper, using electromagnetic (EM) induction. In addition to strong vibration, the EM induction currents generate strong stirring in the melt that aids distribution of the UT effect to large volumes of material. In a typical application, the same induction coil surrounding the crucible used to melt the alloy may be adopted for UT with suitable frequency tuning. Alternatively - or in addition - a top coil may be used. For industrial use, instead of multiple sonotrodes as has been the practice in scaling up, modelling shows that one simply has to alter the coil geometry and current to suit. To reach sinusoidal pressure fluctuations suitable for cavitation it may be necessary to tune the induction coil frequency for resonance, given the crucible dimensions.

  2. Estudo em microondas do aprisionamento e precipitação de elétrons em explosões solares

    NASA Astrophysics Data System (ADS)

    Rosal, A. C.; Costa, J. E. R.

    2003-08-01

    Uma explosão solar é uma variação rápida e intensa do brilho que ocorre nas chamadas regiões ativas da atmosfera, constituídas por um plasma magnetizado com intensa indução magnética. Os modelos de explosões solares atuais, discutidos na literatura, apresentam características de aprisionamento e precipitação de elétrons em ambientes magnéticos simplificados. Neste trabalho, nos propusemos a separar a emissão dos elétrons aprisionados da emissão dos elétrons em precipitação apenas a partir da emissão em microondas, melhorando portanto o controle sobre o conjunto de parâmetros inferidos. A emissão em microondas da população em precipitação é bastante fraca e portanto da nossa base de dados de 130 explosões observadas pelo Rádio Polarímetro de Nobeyama, em sete freqüências, apenas para 32 foi possível separar as duas componentes de emissão com uma boa razão sinal/ruído. A partir de estudos das escalas de tempo das emissões devidas à variação gradual da emissão no aprisionamento e da variação rápida da emissão dos elétrons em precipitação foi possível obter a separação utilizando um filtro temporal nas emissões resultantes. Em nossa análise destas explosões estudamos os espectros girossincrotrônicos da emissão gradual, a qual associamos provir do topo dos arcos magnéticos e da emissão de variação rápida associada aos elétrons em precipitação. Estes espectros foram calculados e dos quais inferimos que a indução magnética efetiva do topo e dos pés foi em média, Btopo = 236 G e Bpés = 577 G, inferidas das freqüências de pico dos espectros em ntopo = 11,8 GHz e npés = 14,6 GHz com leve anisotropia (pequeno alargamento espectral). O índice espectral da distribuição não-térmica de elétrons d, inferido do índice espectral de fótons da emissão em regime opticamente fino, foi de dtopo = 3,3 e dpés = 3,9. Estes parâmetros são típicos da maioria das análises realizadas em ambiente único de

  3. The EM SSAB Annual Work Plan Process: Focusing Board Efforts and Resources - 13667

    SciTech Connect

    Young, Ralph

    2013-07-01

    One of the most daunting tasks for any new member of a local board of the Environmental Management Site Specific Advisory Board (EM SSAB) is to try to understand the scope of the clean-up activities going on at the site. In most cases, there are at least two or three major cleanup activities in progress as well as monitoring of past projects. When planning for future projects is added to the mix, the list of projects can be long. With the clean-up activities involving all major environmental media - air, water, soils, and groundwater, new EM SSAB members can find themselves totally overwhelmed and ineffective. Helping new members get over this initial hurdle is a major objective of EM and all local boards of the EM SSAB. Even as members start to understand the size and scope of the projects at a site, they can still be frustrated at the length of time it takes to see results and get projects completed. Many project and clean-up timelines for most of the sites go beyond 10 years, so it's not unusual for an EM SSAB member to see the completion of only 1 or 2 projects over the course of their 6-year term on the board. This paper explores the annual work planning process of the EM SSAB local boards, one tool that can be used to educate EM SSAB members into seeing the broader picture for the site. EM SSAB local work plans divide the site into projects focused on a specific environmental issue or media such as groundwater and/or waste disposal options. Projects are further broken down into smaller segments by highlighting major milestones. Using these metrics, local boards of the EM SSAB can start to quantify the effectiveness of the project in achieving the ultimate goal of site clean-up. These metrics can also trigger board advice and recommendations for EM. At the beginning of each fiscal year, the EM SSAB work plan provides a road map with quantifiable checkpoints for activities throughout the year. When the work plans are integrated with site-specific, enforceable

  4. Linear array implementation of the EM algorithm for PET image reconstruction

    SciTech Connect

    Rajan, K.; Patnaik, L.M.; Ramakrishna, J.

    1995-08-01

    The PET image reconstruction based on the EM algorithm has several attractive advantages over the conventional convolution back projection algorithms. However, the PET image reconstruction based on the EM algorithm is computationally burdensome for today`s single processor systems. In addition, a large memory is required for the storage of the image, projection data, and the probability matrix. Since the computations are easily divided into tasks executable in parallel, multiprocessor configurations are the ideal choice for fast execution of the EM algorithms. In tis study, the authors attempt to overcome these two problems by parallelizing the EM algorithm on a multiprocessor systems. The parallel EM algorithm on a linear array topology using the commercially available fast floating point digital signal processor (DSP) chips as the processing elements (PE`s) has been implemented. The performance of the EM algorithm on a 386/387 machine, IBM 6000 RISC workstation, and on the linear array system is discussed and compared. The results show that the computational speed performance of a linear array using 8 DSP chips as PE`s executing the EM image reconstruction algorithm is about 15.5 times better than that of the IBM 6000 RISC workstation. The novelty of the scheme is its simplicity. The linear array topology is expandable with a larger number of PE`s. The architecture is not dependant on the DSP chip chosen, and the substitution of the latest DSP chip is straightforward and could yield better speed performance.

  5. Balloting motion of SLEKE launch packages in EM railguns

    NASA Astrophysics Data System (ADS)

    Chu, Szu H.

    1993-01-01

    This paper reports some balloting motion computational results of the SLEKE (Sabot Launched Electric-gun Kinetic Energy) launch packages, which are in their early stage of development. The computation model considers the effects of the EM (Lorentz) propulsion force, friction, air resistance, gravity, elastic forces, and clearance between the launch package and the barrel. The axial, normal and yaw displacement, velocity and acceleration; friction; deformations and forces at the interfacing points are computed. The results of this study indicate that the balloting force for SLEKE launch packages is on the order of the air drag force and that a uniformly distributed power source would be more desirable than sharp pulse current for electromagnetic railguns.

  6. Detection of karst structures using airborne EM and VLF

    SciTech Connect

    Beard, L.P. Nyquist, J.E.; Carpenter, P.J.

    1994-12-31

    Through the combined use of multi-frequency helicopter electromagnetic and VLF data, it is possible to detect and delineate a wide variety of karst structures and possibly to assess their interconnectedness. Multi-frequency EM Can detect karst features if some element of the structure is conductive. This conductive aspect may derive from thick, moist soils in the depression commonly associated with a doline, from conductive fluids in the cavity, or from conductive sediments in the cavity if these occupy a significant portion of it. Multiple loop configurations may also increase the likelihood of detecting karst features. Preliminary evidence indicates total field VLF measurements may be able to detect interconnected karst pathways, so long as the pathways are water or sediment filled. Neither technique can effectively detect dry, resistive air-filled cavities.

  7. Integrated EM & Thermal Simulations with Upgraded VORPAL Software

    SciTech Connect

    D.N. Smithe, D. Karipides, P. Stoltz, G. Cheng, H. Wang

    2011-03-01

    Nuclear physics accelerators are powered by microwaves which must travel in waveguides between room-temperature sources and the cryogenic accelerator structures. The ohmic heat load from the microwaves is affected by the temperature-dependent surface resistance and in turn affects the cryogenic thermal conduction problem. Integrated EM & thermal analysis of this difficult non-linear problem is now possible with the VORPAL finite-difference time-domain simulation tool. We highlight thermal benchmarking work with a complex HOM feed-through geometry, done in collaboration with researchers at the Thomas Jefferson National Accelerator Laboratory, and discuss upcoming design studies with this emerging tool. This work is part of an effort to generalize the VORPAL framework to include generalized PDE capabilities, for wider multi-physics capabilities in the accelerator, vacuum electronics, plasma processing and fusion R&D fields, and we will also discuss user interface and algorithmic upgrades which facilitate this emerging multiphysics capability.

  8. Selling management on the cost benefits of EMS programs

    SciTech Connect

    Beck, W.B.

    1999-07-01

    One of the persistent misconceptions by management is that environmental programs are always a cost to the business. Management tolerates this situation because they recognize the legal and other ethical considerations related to environmental programs, however, they still regard them as a cost and a necessary evil. This paper will present several ideas that can be put into practice by the environmental professionals to counter this management perception. These include the identification and use of macro scale and micro scale cost considerations in the environmental balance sheet to provide management with a different and perhaps more realistic view of the worth of the program. This cost accounting approach should be viewed as just one of the several systems that should make up the modern day environmental management systems (EMS) program.

  9. Making connections. Voice and data solutions for EMS.

    PubMed

    Careless, James; Erich, John

    2008-08-01

    Communications used to be so simple-1) grab the radio, 2) push and talk. Now we're besieged by a confusing assortment of technology and terms-wideband, broadband, VoIP, RoIP, ect.- and a constand thrumming imperative to achieve and improve and perfect some mystical state of full interoperability. Frankly, it can all be a bit much. With this supplement, we hope to clarify you options. We examine the importance of broadband for EMS, with its potential for larger data "pipes" between the hospital and the field; advances in the promising technologies of Voice over IP and Radio over IP; and how some systems are improving their interconnectedness and resulting operations. The jargon can be overwhelming, but the ideas are worth understanding. PMID:18814746

  10. A new method for vitrifying samples for cryoEM.

    PubMed

    Razinkov, Ivan; Dandey, Venkata P; Wei, Hui; Zhang, Zhening; Melnekoff, David; Rice, William J; Wigge, Christoph; Potter, Clinton S; Carragher, Bridget

    2016-08-01

    Almost every aspect of cryo electron microscopy (cryoEM) has been automated over the last few decades. One of the challenges that remains to be addressed is the robust and reliable preparation of vitrified specimens of suitable ice thickness. We present results from a new device for preparing vitrified samples. The successful use of the device is coupled to a new "self-blotting" grid that we have developed to provide a method for spreading a sample to a thin film without the use of externally applied filter paper. This new approach has the advantage of using small amounts of protein material, resulting in large areas of ice of a well defined thickness containing evenly distributed single particles. We believe that these methods will in the future result in a system for vitrifying grids that is completely automated. PMID:27288865

  11. Speech articulator measurements using low power EM-wave sensors

    SciTech Connect

    Holzrichter, J.F.; Burnett, G.C.; Ng, L.C.; Lea, W.A.

    1998-01-01

    Very low power electromagnetic (EM) wave sensors are being used to measure speech articulator motions as speech is produced. Glottal tissue oscillations, jaw, tongue, soft palate, and other organs have been measured. Previously, microwave imaging (e.g., using radar sensors) appears not to have been considered for such monitoring. Glottal tissue movements detected by radar sensors correlate well with those obtained by established laboratory techniques, and have been used to estimate a voiced excitation function for speech processing applications. The noninvasive access, coupled with the small size, low power, and high resolution of these new sensors, permit promising research and development applications in speech production, communication disorders, speech recognition and related topics. {copyright} {ital 1998 Acoustical Society of America.}

  12. EM Properties of Magnetic Minerals at RADAR Frequencies

    NASA Technical Reports Server (NTRS)

    Stillman, D. E.; Olhoeft, G. R.

    2005-01-01

    Previous missions to Mars have revealed that Mars surface is magnetic at DC frequency. Does this highly magnetic surface layer attenuate RADAR energy as it does in certain locations on Earth? It has been suggested that the active magnetic mineral on Mars is titanomaghemite and/or titanomagnetite. When titanium is incorporated into a maghemite or magnetite crystal, the Curie temperature can be significantly reduced. Mars has a wide range of daily temperature fluctuations (303K - 143K), which could allow for daily passes through the Curie temperature. Hence, the global dust layer on Mars could experience widely varying magnetic properties as a function of temperature, more specifically being ferromagnetic at night and paramagnetic during the day. Measurements of EM properties of magnetic minerals were made versus frequency and temperature (300K- 180K). Magnetic minerals and Martian analog samples were gathered from a number of different locations on Earth.

  13. TrakEM2 Software for Neural Circuit Reconstruction

    PubMed Central

    Cardona, Albert; Saalfeld, Stephan; Schindelin, Johannes; Arganda-Carreras, Ignacio; Preibisch, Stephan; Longair, Mark; Tomancak, Pavel; Hartenstein, Volker; Douglas, Rodney J.

    2012-01-01

    A key challenge in neuroscience is the expeditious reconstruction of neuronal circuits. For model systems such as Drosophila and C. elegans, the limiting step is no longer the acquisition of imagery but the extraction of the circuit from images. For this purpose, we designed a software application, TrakEM2, that addresses the systematic reconstruction of neuronal circuits from large electron microscopical and optical image volumes. We address the challenges of image volume composition from individual, deformed images; of the reconstruction of neuronal arbors and annotation of synapses with fast manual and semi-automatic methods; and the management of large collections of both images and annotations. The output is a neural circuit of 3d arbors and synapses, encoded in NeuroML and other formats, ready for analysis. PMID:22723842

  14. TrakEM2 software for neural circuit reconstruction.

    PubMed

    Cardona, Albert; Saalfeld, Stephan; Schindelin, Johannes; Arganda-Carreras, Ignacio; Preibisch, Stephan; Longair, Mark; Tomancak, Pavel; Hartenstein, Volker; Douglas, Rodney J

    2012-01-01

    A key challenge in neuroscience is the expeditious reconstruction of neuronal circuits. For model systems such as Drosophila and C. elegans, the limiting step is no longer the acquisition of imagery but the extraction of the circuit from images. For this purpose, we designed a software application, TrakEM2, that addresses the systematic reconstruction of neuronal circuits from large electron microscopical and optical image volumes. We address the challenges of image volume composition from individual, deformed images; of the reconstruction of neuronal arbors and annotation of synapses with fast manual and semi-automatic methods; and the management of large collections of both images and annotations. The output is a neural circuit of 3d arbors and synapses, encoded in NeuroML and other formats, ready for analysis. PMID:22723842

  15. Suspended-Patch Antenna With Inverted, EM-Coupled Feed

    NASA Technical Reports Server (NTRS)

    Simons, Rainee N.

    2004-01-01

    An improved suspended-patch antenna has been designed to operate at a frequency of about 23 GHz with linear polarization and to be one of four identical antennas in a rectangular array. The antenna includes a parasitic patch on top of a suspended dielectric superstrate, an active patch on top of a suspended dielectric substrate, a microstrip on the bottom of the dielectric substrate, and a ground plane. The microstrip, the ground plane, the airgap between them, and the dielectric substrate together constitute a transmission line that has an impedance of 50 Ohm and is electromagnetically (EM) coupled to the active patch. The parasitic patch is, in turn, excited by the active patch. The microstrip feed is characterized as inverted because the microstrip is on the bottom of the substrate, whereas microstrips are usually placed on the tops of dielectric substrates

  16. Kaisen. EMS as theater of the streets. Part two.

    PubMed

    Dernocoeur, K; Taigman, M

    1991-03-01

    Passing an EMT or paramedic course is a considerable achievement, as you have had to acquire a huge and fascinating volume of medical knowledge. But, did the program teach you acting skills? Acting? Whoever said that EMS professionals need to know anything about acting? We submit that you do; prehospital workers can gain many unanticipated benefits by using various acting skills and tactics in the field. One such benefit is the avoidance of the "complacency trap," or the boredom that can develop if you adopt the viewpoint that one crisis is much like another. But, more importantly, you will be more effective at delivering prehospital care, and you'll have a lot more fun on the job. PMID:10110186

  17. EM modeling of RF drive in DTL tank 4

    SciTech Connect

    Kurennoy, Sergey S.

    2012-06-19

    A 3-D MicroWave Studio model for the RF drive in the LANSCE DTL tank 4 has been built. Both eigensolver and time-domain modeling are used to evaluate maximal fields in the drive module and RF coupling. The LANSCE DTL tank 4 has recently been experiencing RF problems, which may or may not be related to its replaced RF coupler. This situation stimulated a request by Dan Rees to provide EM modeling of the RF drive in the DTL tank 4 (T4). Jim O'Hara provided a CAD model that was imported into the CST Microwave Studio (MWS) and after some modifications became a part of a simplified MWS model of the T4 RF drive. This technical note describes the model and presents simulation results.

  18. Integration of artificial intelligence applications in the EMS: Issues and solutions

    SciTech Connect

    Bann, J.; Irisarri, G.; Kirschen, D.; Miller, B.; Mokhtari, S.

    1996-02-01

    This paper discusses the issues which must be addressed when integrating Artificial Intelligence (AI) and, in particular, expert system applications in an Energy Management System (EMS) environment. It is argued that these issues can be resolved by creating an environment which supports all the interfaces between the Artificial Intelligence (AI) applications and the EMS. This environment should also be responsible for maintaining a model of the power system common to all the AI applications. Once this environment has been created, AI applications can be easily plugged into the EMS. The design of such an environment is described and case studies of its implementation are provided to illustrate its flexibility.

  19. User's guide for the PWR LOCA analysis capability of the WRAP-EM system

    SciTech Connect

    Beranek, F; Gregory, M V

    1980-02-01

    The Water Reactor Analysis Package (WRAP) has been expanded to provide the capability to analyze loss-of-coolant accidents (LOCAs) in both pressurized water reactors (PWRs) and boiling water reactors (BWRs) by using evaluation models (EMs). The input specifications for modules in the WRAP-EM system are presented in this document along with the JOSHUA input templates. This document, along with the WRAP user's guide, provides a step-by-step procedure for setting up a PWR data base for the WRAP-EM system. 12 refs.

  20. Time-Lapse inversion of EM Tomography data for polymer-injected hydrocarbon reservoirs

    NASA Astrophysics Data System (ADS)

    Cheon, Seiwook; Park, Chanho; Nam, Myung Jin; Son, Jeong-Sul

    2015-04-01

    Polymer flooding is a method to increase the production of hydrocarbon reservoir by injecting polymer solution into the reservoir. For a study on the monitoring fluid variation within the reservoir, we first make analysis on seismic- and electromagnetic (EM)- tomography responses for seismic and electrical-resistivity rock physics models (RPMs) of the reservoir considering polymer fluid. Constructing RPMs are dependent on not only geologic characteristics of reservoir but also reservoir parameters such as fluid-type, fluid saturation, pressure and temperature. When making RPM for monitoring analysis, we assume the geology does not changes while reservoir parameters change to affect responses of seismic and EM tomography data. Specifically when constructing electrical-resistivity RPM, we consider three different types of hydrocarbon reservoirs, which are clean sand, shaly sand, sand-shale lamination, while considering two different types of waters (fresh water and salt water) to make 2wt% polymer solution. To compute time lapse EM and seismic tomography responses for corresponding RPMs of polymer-injected reservoirs, we used 2.5D finite element EM modeling algorithm and staggered-grid finite difference elastic modeling algorithm, respectively. Comparison between sensitivities of seismic and EM tomography to polymer injection confirms that EM tomography is more sensitivity to the polymer injection. For the evaluation of the potential of EM tomography to monitor polymer flooding, this study subsequently develops an efficient time-lapse EM tomography inversion algorithm based on the 2.5D EM tomography modeling. Using the inversion algorithm, we inverted the time-lapse EM tomography data to construct true resistivity models of polymer-injected reservoirs and analyze differences between them. From the time-lapse inversion results, we can observe the differences in time lapse responses between using fresh water and salt water have been decreased in the inverted time

  1. Stochastic EM algorithm for nonlinear state estimation with model uncertainties

    NASA Astrophysics Data System (ADS)

    Zia, Amin; Kirubarajan, Thiagalingam; Reilly, James P.; Shirani, Shahram

    2004-01-01

    In most solutions to state estimation problems like, for example, target tracking, it is generally assumed that the state evolution and measurement models are known a priori. The model parameters include process and measurement matrices or functions as well as the corresponding noise statistics. However, there are situations where the model parameters are not known a priori or are known only partially (i.e., with some uncertainty). Moreover, there are situations where the measurement is biased. In these scenarios, standard estimation algorithms like the Kalman filter and the extended Kalman Filter (EKF), which assume perfect knowledge of the model parameters, are not accurate. In this paper, the problem with uncertain model parameters is considered as a special case of maximum likelihood estimation with incomplete-data, for which a standard solution called the expectation-maximization (EM) algorithm exists. In this paper a new extension to the EM algorithm is proposed to solve the more general problem of joint state estimation and model parameter identification for nonlinear systems with possibly non-Gaussian noise. In the expectation (E) step, it is shown that the best variational distribution over the state variables is the conditional posterior distribution of states given all the available measurements and inputs. Therefore, a particular type of particle filter is used to estimate and update the posterior distribution. In the maximization (M) step the nonlinear measurement process parameters are approximated using a nonlinear regression method for adjusting the parameters of a mixture of Gaussians (MofG). The proposed algorithm is used to solve a nonlinear bearing-only tracking problem similar to the one reported recently with uncertain measurement process. It is shown that the algorithm is capable of accurately tracking the state vector while identifying the unknown measurement dynamics. Simulation results show the advantages of the new technique over standard

  2. Stochastic EM algorithm for nonlinear state estimation with model uncertainties

    NASA Astrophysics Data System (ADS)

    Zia, Amin; Kirubarajan, Thiagalingam; Reilly, James P.; Shirani, Shahram

    2003-12-01

    In most solutions to state estimation problems like, for example, target tracking, it is generally assumed that the state evolution and measurement models are known a priori. The model parameters include process and measurement matrices or functions as well as the corresponding noise statistics. However, there are situations where the model parameters are not known a priori or are known only partially (i.e., with some uncertainty). Moreover, there are situations where the measurement is biased. In these scenarios, standard estimation algorithms like the Kalman filter and the extended Kalman Filter (EKF), which assume perfect knowledge of the model parameters, are not accurate. In this paper, the problem with uncertain model parameters is considered as a special case of maximum likelihood estimation with incomplete-data, for which a standard solution called the expectation-maximization (EM) algorithm exists. In this paper a new extension to the EM algorithm is proposed to solve the more general problem of joint state estimation and model parameter identification for nonlinear systems with possibly non-Gaussian noise. In the expectation (E) step, it is shown that the best variational distribution over the state variables is the conditional posterior distribution of states given all the available measurements and inputs. Therefore, a particular type of particle filter is used to estimate and update the posterior distribution. In the maximization (M) step the nonlinear measurement process parameters are approximated using a nonlinear regression method for adjusting the parameters of a mixture of Gaussians (MofG). The proposed algorithm is used to solve a nonlinear bearing-only tracking problem similar to the one reported recently with uncertain measurement process. It is shown that the algorithm is capable of accurately tracking the state vector while identifying the unknown measurement dynamics. Simulation results show the advantages of the new technique over standard

  3. DOE-EM-45 PACKAGING OPERATIONS AND MAINTENANCE COURSE

    SciTech Connect

    Watkins, R.; England, J.

    2010-05-28

    Savannah River National Laboratory - Savannah River Packaging Technology (SRNL-SRPT) delivered the inaugural offering of the Packaging Operations and Maintenance Course for DOE-EM-45's Packaging Certification Program (PCP) at the University of South Carolina Aiken on September 1 and 2, 2009. Twenty-nine students registered, attended, and completed this training. The DOE-EM-45 Packaging Certification Program (PCP) sponsored the presentation of a new training course, Packaging Maintenance and Operations, on September 1-2, 2009 at the University of South Carolina Aiken (USC-Aiken) campus in Aiken, SC. The premier offering of the course was developed and presented by the Savannah River National Laboratory, and attended by twenty-nine students across the DOE, NNSA and private industry. This training informed package users of the requirements associated with handling shipping containers at a facility (user) level and provided a basic overview of the requirements typically outlined in Safety Analysis Report for Packaging (SARP) Chapters 1, 7, and 8. The course taught packaging personnel about the regulatory nature of SARPs to help reduce associated and often costly packaging errors. Some of the topics covered were package contents, loading, unloading, storage, torque requirements, maintaining records, how to handle abnormal conditions, lessons learned, leakage testing (including demonstration), and replacement parts. The target audience for this course was facility operations personnel, facility maintenance personnel, and field quality assurance personnel who are directly involved in the handling of shipping containers. The training also aimed at writers of SARP Chapters 1, 7, and 8, package designers, and anyone else involved in radioactive material packaging and transportation safety. Student feedback and critiques of the training were very positive. SRNL will offer the course again at USC Aiken in September 2010.

  4. Vibrational symmetry classification and torsional tunneling splitting patterns in G6(EM), G12, and G36(EM) molecules

    NASA Astrophysics Data System (ADS)

    Lattanzi, F.; di Lauro, C.

    It is shown that the torsional splitting patterns in methanol-like molecules, with the excitation of small amplitude vibrational modes in the methyl group, are determined by mechanisms that can be formulated in an almost identical fashion to that for ethane-like molecules. This is achieved by treating ethane-like molecules by the internal axis method (IAM) and methanol-like molecules by the principal axis method (PAM) or rho-axis method (RAM). Using the extended molecular groups G6(EM) or C6v(M) for methanol and G36(EM) for ethane, vibrations perpendicular to the internal rotation axis are conveniently described by modes of higher degeneracy (E for methanol and Gs for ethane) in the absence of coupling of top and frame. Head-tail coupling operators, except the cos-type barrier terms, lower the degeneracy, causing vibrational splittings. Coupled vibrational pairs with torsional splitting patterns that we call 'regular' (pure A1, A2 pairs for methanol and pure E1d, E2d pairs for ethane) or 'inverted' (pure B1, B2 pairs for methanol and pure E1s, E2s pairs for ethane) can be formed as limit cases. Actual splitting patterns occur between the above limits, and are basically determined by torsional Coriolis coupling, which can tune more or less to resonance pairs of uncoupled basis levels linked by specific head-tail coupling operators. The inversion of torsional splitting patterns, observed in perpendicular vibrational modes of the methyl group of methanol, can be predicted by these theoretical considerations. Similar considerations apply to molecules of G12 symmetry.

  5. Aquisição de Estreptococos Mutans e Desenvolvimento de Cárie Dental em Primogênitos

    PubMed Central

    NOCE, Erica; RUBIRA, Cassia Maria Fischer; da Silva ROSA, Odila Pereira; da SILVA, Salete Moura Bonifácio; BRETZ, Walter Antonio

    2011-01-01

    Objetivo Avaliar o momento de aquisição de estreptococos mutans (EM), desenvolvimento de cárie dental e as variáveis a eles associadas no decorrer de 23 meses, em primogênitos de famílias de baixo nível socioeconômico, desde os sete meses de idade. Método A amostra foi selecionada com base em mães densamente colonizadas por EM, incluindo todos os membros de 14 famílias que conviviam na mesma casa. Foram envolvidos no estudo 14 mães, pais e primogênitos e 8 parentes, na maioria avós. Exames clínicos e radiográficos iniciais determinaram os índices de cárie e condição periodontal dos adultos. Contagens de EM foram feitas em todos os adultos nas duas primeiras visitas. Nas crianças foram avaliados os níveis de EM, o número de dentes e de cáries, em quatro visitas. Resultados A prevalência de EM nos adultos foi alta, estando ausente em apenas um dos pais. EM foram detectados em 1, 2, 3 e 10 crianças, respectivamente nas visitas #1, 2, 3 e 4. A cárie dental foi detectada em apenas três crianças na última visita (aos 30 meses de idade), as quais apresentaram escores de EM significantemente maiores que as crianças sem cárie, na mesma visita. Conclusão Exclusivamente a condição social de baixa renda e mães densamente colonizadas por EM não são sinônimo de colonização precoce e alta atividade de cárie em crianças cuidadas em casa. O desenvolvimento de cárie está significantemente associado a escores elevados de EM nas crianças. PMID:22022218

  6. Analysis of the electrochemistry of hemes with Ems spanning 800 mV

    PubMed Central

    Zheng, Zhong; Gunner, M. R.

    2009-01-01

    The free energy of heme reduction in different proteins is found to vary over more than 18 kcal/mol. It is a challenge to determine how proteins manage to achieve this enormous range of Ems with a single type of redox cofactor. Proteins containing 141 unique hemes of a-, b-, and c-type, with bis-His, His-Met, and aquo-His ligation were calculated using Multi-Conformation Continuum Electrostatics (MCCE). The experimental Ems range over 800 mV from −350 mV in cytochrome c3 to 450 mV in cytochrome c peroxidase (vs. SHE). The quantitative analysis of the factors that modulate heme electrochemistry includes the interactions of the heme with its ligands, the solvent, the protein backbone, and sidechains. MCCE calculated Ems are in good agreement with measured values. Using no free parameters the slope of the line comparing calculated and experimental Ems is 0.73 (R2 = 0.90), showing the method accounts for 73% of the observed Em range. Adding a +160 mV correction to the His-Met c-type hemes yields a slope of 0.97 (R2 = 0.93). With the correction 65% of the hemes have an absolute error smaller than 60 mV and 92% are within 120 mV. The overview of heme proteins with known structures and Ems shows both the lowest and highest potential hemes are c-type, whereas the b-type hemes are found in the middle Em range. In solution, bis-His ligation lowers the Em by ≈205 mV relative to hemes with His-Met ligands. The bis-His, aquo-His, and His-Met ligated b-type hemes all cluster about Ems which are ≈200 mV more positive in protein than in water. In contrast, the low potential bis-His c-type hemes are shifted little from in solution, whereas the high potential His-Met c-type hemes are raised by ≈300 mV from solution. The analysis shows that no single type of interaction can be identified as the most important in setting heme electrochemistry in proteins. For example, the loss of solvation (reaction field) energy, which raises the Em, has been suggested to be a major factor in

  7. Volta phase plate cryo-EM of the small protein complex Prx3

    PubMed Central

    Khoshouei, Maryam; Radjainia, Mazdak; Phillips, Amy J.; Gerrard, Juliet A.; Mitra, Alok K.; Plitzko, Jürgen M.; Baumeister, Wolfgang; Danev, Radostin

    2016-01-01

    Cryo-EM of large, macromolecular assemblies has seen a significant increase in the numbers of high-resolution structures since the arrival of direct electron detectors. However, sub-nanometre resolution cryo-EM structures are rare compared with crystal structure depositions, particularly for relatively small particles (<400 kDa). Here we demonstrate the benefits of Volta phase plates for single-particle analysis by time-efficient cryo-EM structure determination of 257 kDa human peroxiredoxin-3 dodecamers at 4.4 Å resolution. The Volta phase plate improves the applicability of cryo-EM for small molecules and accelerates structure determination. PMID:26817416

  8. EMDataBank.org: unified data resource for CryoEM

    PubMed Central

    Lawson, Catherine L.; Baker, Matthew L.; Best, Christoph; Bi, Chunxiao; Dougherty, Matthew; Feng, Powei; van Ginkel, Glen; Devkota, Batsal; Lagerstedt, Ingvar; Ludtke, Steven J.; Newman, Richard H.; Oldfield, Tom J.; Rees, Ian; Sahni, Gaurav; Sala, Raul; Velankar, Sameer; Warren, Joe; Westbrook, John D.; Henrick, Kim; Kleywegt, Gerard J.; Berman, Helen M.; Chiu, Wah

    2011-01-01

    Cryo-electron microscopy reconstruction methods are uniquely able to reveal structures of many important macromolecules and macromolecular complexes. EMDataBank.org, a joint effort of the Protein Data Bank in Europe (PDBe), the Research Collaboratory for Structural Bioinformatics (RCSB) and the National Center for Macromolecular Imaging (NCMI), is a global ‘one-stop shop’ resource for deposition and retrieval of cryoEM maps, models and associated metadata. The resource unifies public access to the two major archives containing EM-based structural data: EM Data Bank (EMDB) and Protein Data Bank (PDB), and facilitates use of EM structural data of macromolecules and macromolecular complexes by the wider scientific community. PMID:20935055

  9. 7. PHOTOCOPY, ELEVATIONS FOR E.M. BARRACKS, N.C.O. AND OFFICERS QUARTERS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. PHOTOCOPY, ELEVATIONS FOR E.M. BARRACKS, N.C.O. AND OFFICERS QUARTERS. - NIKE Missile Base SL-40, Barracks No. 1, North end of base, southest of Basketball Court & northwest of Barracks No. 2, Hecker, Monroe County, IL

  10. The Soils and Groundwater – EM-20 S&T Roadmap Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-02-11

    The Soils and Groundwater – EM-20 Science and Technology Roadmap Project is a U.S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies and technology for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by EM-20 Roadmap Project staff.

  11. Pre-flight risk assessment in emergency medical service (EMS) helicopters

    NASA Technical Reports Server (NTRS)

    Shively, Robert J.

    1990-01-01

    A preflight risk assessment system (SAFE) was developed at NASA-Ames Research Center for civil EMS operations to assist pilots in making a decision objectively to accept or decline a mission. The ability of the SAFE system to predict risk profiles was examined at an EMS operator. Results of this field study showed that the usefulness of SAFE was largely dependent on the type of mission flown.

  12. Estudo comparativo entre estrelas centrais de nebulosas planetárias deficientes em hidrogênio

    NASA Astrophysics Data System (ADS)

    Marcolino, W. L. F.; de Araújo, F. X.

    2003-08-01

    Apresentamos neste trabalho o resultado de um estudo das principais características espectrais das estrelas centrais de nebulosas planetárias (ECNP) deficientes em hidrogênio. A origem e a evolução dessas estrelas ainda constitui um problema em aberto na evolução estelar. Geralmente esses objetos são divididos em [WCE], [WCL] e [WELS]. Os tipos [WCE] e [WCL] apresentam um espectro típico de uma estrela Wolf-Rayet carbonada de população I e as [WELS] apresentam linhas fracas de carbono e oxigênio em emissão. Existem evidências que apontam a seguinte sequência evolutiva : [WCL] = > [WCE] = > [WELS] = > PG 1159 (pré anã-branca). No entanto, tal cenário apresenta falhas como por exemplo a falta de ECNP entre os tipos [WCL] e [WCE]. Baseados em uma amostra de 24 objetos obtida no telescópio de 1.52m em La Silla, Chile (acordo ESO/ON), ao longo do ano 2000, apresentamos os resultados da comparação das larguras equivalentes de diversas linhas relevantes entre os tipos [WCL], [WCE] e [WELS]. Verificamos que nossos dados estão de acordo com a sequência evolutiva. Baseado nas linhas de C IV, conseguimos dividir pela primeira vez as [WELS] em dois grupos principais. Além disso, os dados reforçam a afirmação de que as [WCE] são as estrelas que possuem a maior temperatura entre as ECNP deficientes em hidrogênio. Discutimos ainda, a escassez de dados disponíveis na literatura e a necessidade da obtenção de parametros físicos para estes objetos.

  13. The development of cryo-EM into a mainstream structural biology technique

    PubMed Central

    Nogales, Eva

    2016-01-01

    Single-particle cryo-electron microscopy (cryo-EM) has emerged over the last two decades as a technique capable of studying challenging systems that otherwise defy structural characterization. Recent technical advances have resulted in a ‘quantum leap’ in applicability, throughput and achievable resolution that has gained this technique worldwide attention. Here I discuss some of the major historical landmarks in the development of the cryo-EM field, ultimately leading to its present success. PMID:27110629

  14. The front lines of domestic violence. Training model for rural EMS personnel.

    PubMed

    Hall, Marcia; Becker, Vanessa

    2002-09-01

    1. Domestic violence is a major public health problem requiring committed, coordinated community response. 2. Domestic violence is a significant cause of morbidity and mortality for women and children in the United States. 3. EMS personnel play a frontline role in the critical response and prevention of domestic violence. 4. EMS education and training are requisite for safe, effective responses to domestic violence in rural communities. PMID:12235968

  15. Space resolution obtained with a highly segmented SCIFI e.m. calorimeter

    NASA Astrophysics Data System (ADS)

    Bertino, M.; Bini, C.; De Pedis, D.; De Zorzi, G.; Diambrini Palazzi, G.; Di Cosimo, G.; Di Domenico, A.; Gauzzi, P.; Zanello, D.

    1992-05-01

    During the setting up of the LEP-5 experiment, we tested a longitudinal SCIFI e.m. calorimeter, having a module cross area 25 × 25 mm 2 and 12.5 × 12.5 mm 2 for large and small modules respectively. The results were obtained with 10 and 50 GeV electrons, and concern the impact point resolution and the transverse distribution of the e.m. shower energy inside the calorimeter.

  16. Effects of Loaded Squat Exercise with and without Application of Superimposed EMS on Physical Performance.

    PubMed

    Wirtz, Nicolas; Zinner, Christoph; Doermann, Ulrike; Kleinoeder, Heinz; Mester, Joachim

    2016-03-01

    The aim of the present study was to investigate the effects of a multiple set squat exercise training intervention with superimposed electromyostimulation (EMS) on strength and power, sprint and jump performance. Twenty athletes from different disciplines participated and were divided into two groups: strength training (S) or strength training with superimposed EMS (S+E). Both groups completed the same training program twice a week over a six week period consisting of four sets of the 10 repetition maximum of back squats. Additionally, the S+E group had EMS superimposed to the squat exercise with simultaneous stimulation of leg and trunk muscles. EMS intensity was adjusted to 70% of individual pain threshold to ensure dynamic movement. Strength and power of different muscle groups, sprint, and vertical jump performance were assessed one week before (pre), one week after (post) and three weeks (re) following the training period. Both groups showed improvements in leg press strength and power, countermovement and squat jump performance and pendulum sprint (p < 0.05), with no changes for linear sprint. Differences between groups were only evident at the leg curl machine with greater improvements for the S+E group (p < 0.05). Common squat exercise training and squat exercise with superimposed EMS improves maximum strength and power, as well as jumping abilities in athletes from different disciplines. The greater improvements in strength performance of leg curl muscles caused by superimposed EMS with improvements in strength of antagonistic hamstrings in the S+E group are suggesting the potential of EMS to unloaded (antagonistic) muscle groups. Key pointsSimilar strength adaptations occurred after a 6 week 10 RM back squat exercise program with superimposed EMS (S+E) and 10 RM back squat exercise (S) alone.Specific adaptations for S+E at the leg curl muscles were evident.S and S+E improved SJ, CMJ and pendulum sprint performance.No improvement occurred in linear sprint

  17. Single-particle cryo-EM data acquisition by using direct electron detection camera.

    PubMed

    Wu, Shenping; Armache, Jean-Paul; Cheng, Yifan

    2016-02-01

    Recent advances in single-particle electron cryo-microscopy (cryo-EM) were largely facilitated by the application of direct electron detection cameras. These cameras feature not only a significant improvement in detective quantum efficiency but also a high frame rate that enables images to be acquired as 'movies' made of stacks of many frames. In this review, we discuss how the applications of direct electron detection cameras in cryo-EM have changed the way the data are acquired. PMID:26546989

  18. Effects of Loaded Squat Exercise with and without Application of Superimposed EMS on Physical Performance

    PubMed Central

    Wirtz, Nicolas; Zinner, Christoph; Doermann, Ulrike; Kleinoeder, Heinz; Mester, Joachim

    2016-01-01

    The aim of the present study was to investigate the effects of a multiple set squat exercise training intervention with superimposed electromyostimulation (EMS) on strength and power, sprint and jump performance. Twenty athletes from different disciplines participated and were divided into two groups: strength training (S) or strength training with superimposed EMS (S+E). Both groups completed the same training program twice a week over a six week period consisting of four sets of the 10 repetition maximum of back squats. Additionally, the S+E group had EMS superimposed to the squat exercise with simultaneous stimulation of leg and trunk muscles. EMS intensity was adjusted to 70% of individual pain threshold to ensure dynamic movement. Strength and power of different muscle groups, sprint, and vertical jump performance were assessed one week before (pre), one week after (post) and three weeks (re) following the training period. Both groups showed improvements in leg press strength and power, countermovement and squat jump performance and pendulum sprint (p < 0.05), with no changes for linear sprint. Differences between groups were only evident at the leg curl machine with greater improvements for the S+E group (p < 0.05). Common squat exercise training and squat exercise with superimposed EMS improves maximum strength and power, as well as jumping abilities in athletes from different disciplines. The greater improvements in strength performance of leg curl muscles caused by superimposed EMS with improvements in strength of antagonistic hamstrings in the S+E group are suggesting the potential of EMS to unloaded (antagonistic) muscle groups. Key points Similar strength adaptations occurred after a 6 week 10 RM back squat exercise program with superimposed EMS (S+E) and 10 RM back squat exercise (S) alone. Specific adaptations for S+E at the leg curl muscles were evident. S and S+E improved SJ, CMJ and pendulum sprint performance. No improvement occurred in linear

  19. ModEM: A modular system for inversion of elecgtromagnetic geophysical data

    NASA Astrophysics Data System (ADS)

    Egbert, G. D.; Kelbert, A.; Meqbel, N.; Weng, A.

    2010-12-01

    We have developed a modular system of computer codes for inversion of electromagnetic (EM) geophysical data (ModEM). ModEM allows for rapid adaptation of inversion algorithms developed for one purpose (e.g., three-dimensional magnetotellurics (MT)) to other EM problems (e.g., controlled source EM). The modular approach can also simplify maintenance of the inversion code, as well as development of new capabilities -- e.g., allowing for new data types such as the inter-site transfer functions in MT, or modifying model regularization. Basic data objects (model parameters, solution vectors, data vectors) are treated as abstract data types, with a standard set of methods developed for each class, including creation and destruction, and, as appropriate, linear algebra or other vector space methods. Operators required for gradient computations are developed as mappings between these basic object classes. Only these abstract data objects and mappings are manipulated by higher level Jacobian and inversion routines, with no reference to the problem specific details required for a specific EM method, or for the numerical implementation of the forward solver. Required problem-specific components are instantiated at the lowest levels of the system, with details hidden from generic top-level routines by an interface layer. Parallelization using MPI has been implemented at the top level, and is thus applicable to any problem embedded in ModEM. To illustrate the flexibility of the system, we consider applications to two- and three-dimensional MT inversion, as well as simple controlled source EM problems.

  20. Reservoir characterization and process monitoring with EM methods. 1994 Annual report

    SciTech Connect

    Wilt, M.

    1995-05-01

    During the past five years at Lawrence Livermore National Laboratory (LLNL) the authors have applied the EM induction method to the problem of petroleum reservoir characterization and enhanced oil recovery (EOR) monitoring. The goal is to develop practical tools for determining the electrical resistivity distribution between boreholes at a useful scale for reservoir characterization. During FY94 the authors conducted their largest field test to date. They applied crosshole and surface-to-borehole EM techniques to reservoir characterization at the Los Hills No. 3 oil field making three sets of measurements during the initial phase of the steam drive.From these data they were able to determine the resistivity and configuration of the oil sands, between the observation wells, and provide an image of the subsurface resistivity changes due to the steam drive. They also conducted a waterflood experiment at the Richmond Field Station facility using the borehole-to-surface EM technique. For this test they injected a small quantity of saltwater, and applied the Em technique to monitor the progress of the injected plume. Data collection for this experiment is complete but the results are yet to be interpreted. Finally, a project to understand EM propagation through steel casing was initiated in 1994. The goals of the experiment are to determine the limits and applications for crosswell EM surveys through steel well casing.

  1. An Uncertainty Analysis for Predicting Soil Profile Salinity Using EM Induction Data

    NASA Astrophysics Data System (ADS)

    Huang, Jingyi; Monteiro Santos, Fernando; Triantafilis, John

    2016-04-01

    Proximal soil sensing techniques such as electromagnetic (EM) induction have been used to identify and map the areal variation of average soil properties. However, soil varies with depth owing to the action of various soil forming factors (e.g., parent material and topography). In this work we collected EM data using an EM38 and EM34 meter along a 22-km transect in the Trangie District, Australia.We jointly inverted these data using EM4Soil software and compare our 2-dimensional model of true electrical conductivity (sigma - mS/m) with depth against measured electrical conductivity of a saturated soil-paste extract (ECe - dS/m) at depth of 0-16 m. Through the use of a linear regression (LR) model and by varying forward modelling algorithms (cumulative function and full solution), inversion algorithms (S1 and S2), and damping factor (lambda) we determined a suitable electromagnetic conductivity image (EMCI) which was optimal when using the full solution, S2 and lambda = 0.6. To evaluate uncertainty of the inversion process and the LR model, we conducted an uncertainty analysis. The distribution of the model misfit shows the largest uncertainty caused by inversion (mostly due to EM34-40) occurs at deeper profiles while the largest uncertainty of the LR model occurs where the soil profile is most saline. These uncertainty maps also illustrate us how the model accuracy can be improved in the future.

  2. Using Molecular Simulation to Model High-Resolution Cryo-EM Reconstructions.

    PubMed

    Kirmizialtin, Serdal; Loerke, Justus; Behrmann, Elmar; Spahn, Christian M T; Sanbonmatsu, Karissa Y

    2015-01-01

    An explosion of new data from high-resolution cryo-electron microscopy (cryo-EM) studies has produced a large number of data sets for many species of ribosomes in various functional states over the past few years. While many methods exist to produce structural models for lower resolution cryo-EM reconstructions, high-resolution reconstructions are often modeled using crystallographic techniques and extensive manual intervention. Here, we present an automated fitting technique for high-resolution cryo-EM data sets that produces all-atom models highly consistent with the EM density. Using a molecular dynamics approach, atomic positions are optimized with a potential that includes the cross-correlation coefficient between the structural model and the cryo-EM electron density, as well as a biasing potential preserving the stereochemistry and secondary structure of the biomolecule. Specifically, we use a hybrid structure-based/ab initio molecular dynamics potential to extend molecular dynamics fitting. In addition, we find that simulated annealing integration, as opposed to straightforward molecular dynamics integration, significantly improves performance. We obtain atomistic models of the human ribosome consistent with high-resolution cryo-EM reconstructions of the human ribosome. Automated methods such as these have the potential to produce atomistic models for a large number of ribosome complexes simultaneously that can be subsequently refined manually. PMID:26068751

  3. Fusion to a homo-oligomeric scaffold allows cryo-EM analysis of a small protein.

    PubMed

    Coscia, Francesca; Estrozi, Leandro F; Hans, Fabienne; Malet, Hélène; Noirclerc-Savoye, Marjolaine; Schoehn, Guy; Petosa, Carlo

    2016-01-01

    Recent technical advances have revolutionized the field of cryo-electron microscopy (cryo-EM). However, most monomeric proteins remain too small (<100 kDa) for cryo-EM analysis. To overcome this limitation, we explored a strategy whereby a monomeric target protein is genetically fused to a homo-oligomeric scaffold protein and the junction optimized to allow the target to adopt the scaffold symmetry, thereby generating a chimeric particle suitable for cryo-EM. To demonstrate the concept, we fused maltose-binding protein (MBP), a 40 kDa monomer, to glutamine synthetase, a dodecamer formed by two hexameric rings. Chimeric constructs with different junction lengths were screened by biophysical analysis and negative-stain EM. The optimal construct yielded a cryo-EM reconstruction that revealed the MBP structure at sub-nanometre resolution. These findings illustrate the feasibility of using homo-oligomeric scaffolds to enable cryo-EM analysis of monomeric proteins, paving the way for applying this strategy to challenging structures resistant to crystallographic and NMR analysis. PMID:27485862

  4. New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

    SciTech Connect

    Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

    2013-07-01

    A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In March 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)

  5. Visualizing Proteins and Macromolecular Complexes by Negative Stain EM: from Grid Preparation to Image Acquisition

    PubMed Central

    Booth, David S.; Avila-Sakar, Agustin; Cheng, Yifan

    2011-01-01

    Single particle electron microscopy (EM), of both negative stained or frozen hydrated biological samples, has become a versatile tool in structural biology 1. In recent years, this method has achieved great success in studying structures of proteins and macromolecular complexes 2, 3. Compared with electron cryomicroscopy (cryoEM), in which frozen hydrated protein samples are embedded in a thin layer of vitreous ice 4, negative staining is a simpler sample preparation method in which protein samples are embedded in a thin layer of dried heavy metal salt to increase specimen contrast 5. The enhanced contrast of negative stain EM allows examination of relatively small biological samples. In addition to determining three-dimensional (3D) structure of purified proteins or protein complexes 6, this method can be used for much broader purposes. For example, negative stain EM can be easily used to visualize purified protein samples, obtaining information such as homogeneity/heterogeneity of the sample, formation of protein complexes or large assemblies, or simply to evaluate the quality of a protein preparation. In this video article, we present a complete protocol for using an EM to observe negatively stained protein sample, from preparing carbon coated grids for negative stain EM to acquiring images of negatively stained sample in an electron microscope operated at 120kV accelerating voltage. These protocols have been used in our laboratory routinely and can be easily followed by novice users. PMID:22215030

  6. An erythromycin derivative, EM-523, induces motilin-like gastrointestinal motility in dogs.

    PubMed

    Inatomi, N; Satoh, H; Maki, Y; Hashimoto, N; Itoh, Z; Omura, S

    1989-11-01

    The effect of an erythromycin derivative, EM-523, on gastrointestinal motility was investigated in conscious dogs and compared with that of motilin cisapride, trimebutine and metoclopramide. In the fasting state, EM-523 given i.v. or i.d. at 3 micrograms/kg or more induced contractions in the stomach that migrated along the small intestine. The pattern of the contractions was very similar to that induced by motilin. In the digestive state, EM-523 increased the amplitude of gastric contractions. Cisapride and metoclopramide increased gastrointestinal motility both in the fasting and digestive states; however, their contractile pattern was different from that of EM-523. Trimebutine did not induce gastric motility in the fasting state but rather decreased gastric motility in the digestive state. The contractions induced by EM-523 and motilin were inhibited by atropine but were not affected by naloxone, suggesting that the cholinergic pathway is important in the exertion of their action. These results indicate that EM-523 mimics motilin in stimulating gastrointestinal motility and that this agent may be useful treat gastrointestinal disorders such as gastric stasis, gastroesophageal reflux, and postoperative ileus, and so forth. PMID:2810120

  7. Method for estimating dynamic EM tracking accuracy of surgical navigation tools

    NASA Astrophysics Data System (ADS)

    Nafis, Christopher; Jensen, Vern; Beauregard, Lee; Anderson, Peter

    2006-03-01

    Optical tracking systems have been used for several years in image guided medical procedures. Vendors often state static accuracies of a single retro-reflective sphere or LED. Expensive coordinate measurement machines (CMM) are used to validate the positional accuracy over the specified working volume. Users are interested in the dynamic accuracy of their tools. The configuration of individual sensors into a unique tool, the calibration of the tool tip, and the motion of the tool contribute additional errors. Electromagnetic (EM) tracking systems are considered an enabling technology for many image guided procedures because they are not limited by line-of-sight restrictions, take minimum space in the operating room, and the sensors can be very small. It is often difficult to quantify the accuracy of EM trackers because they can be affected by field distortion from certain metal objects. Many high-accuracy measurement devices can affect the EM measurements being validated. EM Tracker accuracy tends to vary over the working volume and orientation of the sensors. We present several simple methods for estimating the dynamic accuracy of EM tracked tools. We discuss the characteristics of the EM Tracker used in the GE Healthcare family of surgical navigation systems. Results for other tracking systems are included.

  8. High-speed computation of the EM algorithm for PET image reconstruction

    SciTech Connect

    Rajan, K.; Patnaik, L.M.; Ramakrishna, J. )

    1994-10-01

    The PET image reconstruction based on the EM algorithm has several attractive advantages over the conventional convolution backprojection algorithms. However, two major drawbacks have impeded the routine use of the EM algorithm, namely, the long computational time due to slow convergence and the large memory required for the storage of the image, projection data and the probability matrix. In this study, the authors attempts to solve these two problems by parallelizing the EM algorithm on a multiprocessor system. The authors have implemented an extended hypercube (EH) architecture for the high-speed computation of the EM algorithm using the commercially available fast floating point digital signal processor (DSP) chips as the processing elements (PEs). The authors discuss and compare the performance of the EM algorithm on a 386/387 machine, CD 4360 mainframe, and on the EH system. The results show that the computational speed performance of an EH using DSP chips as PEs executing the EM image reconstruction algorithm is about 130 times better than that of the CD 4360 mainframe. The EH topology is expandable with more number of PEs.

  9. Fusion to a homo-oligomeric scaffold allows cryo-EM analysis of a small protein

    PubMed Central

    Coscia, Francesca; Estrozi, Leandro F.; Hans, Fabienne; Malet, Hélène; Noirclerc-Savoye, Marjolaine; Schoehn, Guy; Petosa, Carlo

    2016-01-01

    Recent technical advances have revolutionized the field of cryo-electron microscopy (cryo-EM). However, most monomeric proteins remain too small (<100 kDa) for cryo-EM analysis. To overcome this limitation, we explored a strategy whereby a monomeric target protein is genetically fused to a homo-oligomeric scaffold protein and the junction optimized to allow the target to adopt the scaffold symmetry, thereby generating a chimeric particle suitable for cryo-EM. To demonstrate the concept, we fused maltose-binding protein (MBP), a 40 kDa monomer, to glutamine synthetase, a dodecamer formed by two hexameric rings. Chimeric constructs with different junction lengths were screened by biophysical analysis and negative-stain EM. The optimal construct yielded a cryo-EM reconstruction that revealed the MBP structure at sub-nanometre resolution. These findings illustrate the feasibility of using homo-oligomeric scaffolds to enable cryo-EM analysis of monomeric proteins, paving the way for applying this strategy to challenging structures resistant to crystallographic and NMR analysis. PMID:27485862

  10. Operation Protective Edge - A Unique Challenge for a Civilian EMS Agency.

    PubMed

    Jaffe, Eli; Strugo, Refael; Wacht, Oren

    2015-10-01

    During July through August 2014, Operation Protective Edge, a military conflict between Israel and the Hamas regime in Gaza, dramatically affected both populations. Magen David Adom (MDA), the Israeli national Emergency Medical Service (EMS) and a member of the Red Cross, faced a unique challenge during the conflict: to continue providing crucial service to the entire civilian population of Israel, which was under constant missile threat. This challenge included not only providing immediate care for routine EMS calls under missile threat, but also preparing and delivering immediate care to civilians injured in attacks on major cities, as well as small communities, in Israel. This task is a challenge for a civilian EMS agency that normally operates in a non-military environment, yet, in an instant, must enhance its capability to respond to a considerable threat to its population. During Operation Protective Edge, MDA provided care for 842 wounded civilians and utilized a significant amount of its resources. Providing EMS services for a civilian population in a mixed civilian/military scenario is a challenging task on a national level for an EMS system, especially when the threat lasts for weeks. This report describes MDA's preparedness and operations during Operation Protective Edge, and the unique EMS challenges and dilemmas the agency faced. PMID:26323985

  11. EM techniques for archaeological laboratory experiments: preliminary results

    NASA Astrophysics Data System (ADS)

    Capozzoli, Luigi; De Martino, Gregory; Giampaolo, Valeria; Raffaele, Luongo; Perciante, Felice; Rizzo, Enzo

    2015-04-01

    The electromagnetic techniques (EM) are based on the investigation of subsoil geophysical parameters and in the archaeological framework they involve in studying contrasts between the buried cultural structures and the surrounding materials. Unfortunately, the geophysical contrast between archaeological features and surrounding soils sometimes are difficult to define due to problems of sensitivity and resolution both related on the characteristic of the subsoil and the geophysical methods. For this reason an experimental activity has been performed in the Hydrogeosite laboratory addressed on the assessment of the capability of geophysical techniques to detect archeological remains placed in the humid/saturated subsoil. At Hydrogeosite Laboratory of CNR-IMAA, a large scale sand-box is located, consisting on a pool shape structures of 230m3 where archaeological remains have been installed . The remains are relative to a living environment and burial of Roman times (walls, tombs, roads, harbour, etc.) covered by sediments. In order to simulate lacustrine and wetland condition and to simulate extreme events (for example underwater landslide, fast natural erosion coast, etc.) the phreatic level was varied and various acquisitions for the different scenarios were performed. In order to analyze the EM behavior of the buried small archaeological framework, ground penetrating radar (GPR) and electrical resistivity tomographies were performed. With GPR, analysis in time domain and frequency domain were performed and coupled to information obtained through resistivity analysis with the support of numerical simulations used to compare the real data with those modeled. A dense grid was adopted for 400 and 900 MHz e-m acquisitions in both the directions, the maximum depth of investigation was limited and less than 3 meters. The same approach was used for ERT acquisition where different array are employed, in particular 3D configuration was used to carry out a 3D resistivity

  12. Tide-driven fluid mud transport in the Ems estuary

    NASA Astrophysics Data System (ADS)

    Becker, Marius; Maushake, Christian; Winter, Christian

    2014-05-01

    The Ems estuary, located at the border between The Netherlands and Germany, experienced a significant change of the hydrodynamic regime during the past decades, as a result of extensive river engineering. With the net sediment transport now being flood-oriented, suspended sediment concentrations have increased dramatically, inducing siltation and formation of fluid mud layers, which, in turn, influence hydraulic flow properties, such as turbulence and the apparent bed roughness. Here, the process-based understanding of fluid mud is essential to model and predict mud accumulation, not only regarding the anthropogenic impact, but also in view of the expected changes of environmental boundary conditions, i.e., sea level rise. In the recent past, substantial progress has been made concerning the understanding of estuarine circulation and influence of tidal asymmetry on upstream sediment accumulation. While associated sediment transport formulations have been implemented in the framework of numerical modelling systems, in-situ data of fluid mud are scarce. This study presents results on tide-driven fluid mud dynamics, measured during four tidal cycles aside the navigation channel in the Ems estuary. Lutoclines, i.e., strong vertical density gradients, were detected by sediment echo sounder (SES). Acoustic Doppler current profiles (ADCP) of different acoustic frequencies were used to determine hydrodynamic parameters and the vertical distribution of suspended sediment concentrations in the upper part of the water column. These continuous profiling measurements were complemented by CTD, ADV, and OBS casts. SES and ADCP profiles show cycles of fluid mud entrainment during accelerating flow, and subsequent settling, and the reformation of a lutocline during decelerating flow and slack water. Significant differences are revealed between flood and ebb phase. Highest entrainment rates are measured at the beginning of the flood phase, associated with strong current shear and

  13. Exploration Depth of Multi-frequency Helicopter EM Systems

    NASA Astrophysics Data System (ADS)

    Yin, C.; Hodges, G.

    2004-05-01

    Due to the high resolution of hilicopter electromagnetic (HEM) systems, they are being widely used for shallow earth resistivity mapping problems. The traditional investigation of the exploration depth of a HEM system is based on the model of a single-frequency coil array over a layered earth. In this paper we extend the study to the multi-frequency HEM systems. We first determine for each frequency channel of a HEM system the maximal depth of a target, beyond which it cannot be identified from the EM signal. This is mathemically realized by assuming that the abnormal signal from the target is three times larger than the noise level of the HEM channel. Since each frequency channel of an HEM system has a different noise level and for different frequency channel the EM field has different penetration depth, we choose the biggest value of these depths as the depth of exploration. Different models are implemented in the study of this paper, including a layered earth model, a dipping plate or a dyke, a 3D ore body, etc. We use as example the Fugro DIGHEM system with three horizontal coplanar (HCP) coils (380 or 900, 7200, 56kHz) and two vertical coaxial (VCX) coils (900, 5500Hz). The following conclusions are obtained: 1. Except for a steeply dipping sheet, the HCP coil array has a larger depth of exploration than the VCX coil array; 2. The depth of exploration may be obtained from different frequency channels for different target geometries and different conductivity contrasts between the target and host rocks. This means that for a specific target geometry and conductivity contrast, we need to search such a frequency channel that offers the maximal value for depth of exploration; 3. Among the factors that influence the depth of exploration, the noise level of the HEM system is the key. The other factors include the geometry of the target and the conductivity contrast between the target and the host rocks, and the relative location between the HEM system and the target

  14. Abundâncias em estrelas de Bário

    NASA Astrophysics Data System (ADS)

    Allen, D. M.

    2003-08-01

    Estrelas de Bário apresentam linhas intensas de elementos produzidos pelo processos (ex: Ba, Y, Sr, Zr) e bandas intensas de CN, C2 e CH. A hipótese mais aceita sobre a origem deste grupo peculiar é a de que essas estrelas façam parte de sistemas binários, tendo recebido material enriquecido em elementos pesados da companheira mais evoluída. Apresentamos neste trabalho uma análise detalhada de uma amostra de estrelas desta classe, incluindo determinação de parâmetros atmosféricos e cálculo de abundâncias. As temperaturas efetivas foram determinadas a partir de dados fotométricos obtidos com o Fotrap instalado no telescópio Zeiss do LNA (Laboratório Nacional de Astrofísica) (B-V, V-I, R-I, V-R), e coletados na literatura nos catálogos Hipparcos (B-V), 2MASS (Two Micron All Sky Survey) (V-K) e The General Catalogue Photometric Data (sistema Geneva). Obtivemos uma faixa de temperaturas de 4400 £ Tef £ 6500. As metalicidades foram determinadas a partir de linhas de Fe I e Fe II, estando os resultados no intervalo -1 £ [Fe/H] £ +0.1. O log g foi determinado pelo equilíbrio de ionização e pela relação com a magnitude bolométrica, a temperatura e a massa, sendo os resultados na faixa 1.5 £ log g £ 4.5. As distâncias utilizadas foram determinadas com o auxílio das paralaxes Hipparcos, e as massas determinadas por modelos de isócronas. Os espectros utilizados foram obtidos com o espectrógrafo FEROS no Telescópio de 1,5m do ESO (European Southern Observatory). As abundâncias foram calculadas por meio de síntese espectral de linhas individuais incluindo elementos alfa, pico do Fe, s e r. Encontramos um excesso de elementos pesados em relação ao Fe, como esperado para estrelas de Bário.

  15. Monitoring Survivability and Infectivity of Porcine Epidemic Diarrhea Virus (PEDv) in the Infected On-Farm Earthen Manure Storages (EMS)

    PubMed Central

    Tun, Hein M.; Cai, Zhangbin; Khafipour, Ehsan

    2016-01-01

    In recent years, porcine epidemic diarrhea virus (PEDv) has caused major epidemics, which has been a burden to North America’s swine industry. Low infectious dose and high viability in the environment are major challenges in eradication of this virus. To further understand the viability of PEDv in the infected manure, we longitudinally monitored survivability and infectivity of PEDv in two open earthen manure storages (EMS; previously referred to as lagoon) from two different infected swine farms identified in the province of Manitoba, Canada. Our study revealed that PEDv could survive up to 9 months in the infected EMS after the initial outbreak in the farm. The viral load varied among different layers of the EMS with an average of 1.1 × 105 copies/ml of EMS, independent of EMS temperature and pH. In both studied EMS, the evidence of viral replication was observed through increased viral load in the later weeks of the samplings while there was no new influx of infected manure into the EMS, which was suggestive of presence of potential alternative hosts for PEDv within the EMS. Decreasing infectivity of virus over time irrespective of increased viral load suggested the possibility of PEDv evolution within the EMS and perhaps in the new host that negatively impacted virus infectivity. Viral load in the top layer of the EMS was low and mostly non-infective suggesting that environmental factors, such as UV and sunlight, could diminish the replicability and infectivity of the virus. Thus, frequent agitation of the EMS that could expose virus to UV and sunlight might be a potential strategy for reduction of PEDv load and infectivity in the infected EMS. PMID:27014197

  16. The tidal asymmetries and residual flows in Ems Estuary

    NASA Astrophysics Data System (ADS)

    Pein, Johannes Ulrich; Stanev, Emil Vassilev; Zhang, Yinglong Joseph

    2014-12-01

    A 3D unstructured-grid numerical model of the Ems Estuary is presented. The simulated hydrodynamics are compared against tidal gauge data and observations from research cruises. A comparison with an idealized test reveals the capability of the model to reproduce the secondary circulation patterns known from theoretical results. The simulations prove to be accurate and realistic, confirming and extending findings from earlier observations and modeling studies. The basic characteristics of dominant physical processes in the estuary such as tidal amplification, tidal damping, overtide generation, baroclinicity and internal mixing asymmetry are quantified. The model demonstrates an overall dominance of the flood currents in most of the studied area. However, the hypsometric control in the vicinity of Dollart Bay reverses this asymmetry, with the ebb currents stronger than the flood ones. Small-scale bathymetric characteristics and baroclinicity result in a very complex interplay between dominant physical mechanisms in different parts of the tidal channels and over the tidal flats. Residual flow reveals a clear overturning circulation in some parts of the estuary which is related to a mixing asymmetry between flood and ebb currents. We demonstrate that while areas close to the tidal river exhibit overall similarity with density controlled estuarine conditions, in large areas of the outer estuary barotropic forcing and complex bathymetry together with the density distribution affect substantially the horizontal circulation.

  17. PREFACE: EmQM13: Emergent Quantum Mechanics 2013

    NASA Astrophysics Data System (ADS)

    2014-04-01

    These proceedings comprise the invited lectures of the second international symposium on Emergent Quantum Mechanics (EmQM13), which was held at the premises of the Austrian Academy of Sciences in Vienna, Austria, 3-6 October 2013. The symposium was held at the ''Theatersaal'' of the Academy of Sciences, and was devoted to the open exploration of emergent quantum mechanics, a possible ''deeper level theory'' that interconnects three fields of knowledge: emergence, the quantum, and information. Could there appear a revised image of physical reality from recognizing new links between emergence, the quantum, and information? Could a novel synthesis pave the way towards a 21st century, ''superclassical'' physics? The symposium provided a forum for discussing (i) important obstacles which need to be overcome as well as (ii) promising developments and research opportunities on the way towards emergent quantum mechanics. Contributions were invited that presented current advances in both standard as well as unconventional approaches to quantum mechanics. The EmQM13 symposium was co-organized by Gerhard Grössing (Austrian Institute for Nonlinear Studies (AINS), Vienna), and by Jan Walleczek (Fetzer Franklin Fund, USA, and Phenoscience Laboratories, Berlin). After a very successful first conference on the same topic in 2011, the new partnership between AINS and the Fetzer Franklin Fund in producing the EmQM13 symposium was able to further expand interest in the promise of emergent quantum mechanics. The symposium consisted of two parts, an opening evening addressing the general public, and the scientific program of the conference proper. The opening evening took place at the Great Ceremonial Hall (Grosser Festsaal) of the Austrian Academy of Sciences, and it presented talks and a panel discussion on ''The Future of Quantum Mechanics'' with three distinguished speakers: Stephen Adler (Princeton), Gerard 't Hooft (Utrecht) and Masanao Ozawa (Nagoya). The articles contained in

  18. If EM waves don't interfere, what causes interferograms?

    NASA Astrophysics Data System (ADS)

    Wellard, Stanley J.

    2012-10-01

    Photonics engineers involved in designing and operating Fourier transform spectrometers (FTS) often rely on Maxwell's wave equations and time-frequency (distance-wavenumber) Fourier theory as models to understand and predict the conversion of optical energy to electrical signals in their instruments. Dr. Chandrasekhar Roychoudhuri and his colleagues, at last year's conference, presented three significant concepts that might completely change the way we comprehend the interaction of light and matter and the way interference information is generated. The first concept is his non-interaction of waves (NIW) formulation, which puts in place an optical wave description that more accurately describe the properties of the finite time and spatial signals of an optical system. The second is a new description for the cosmic EM environment that recognizes that space is really filled with the ether of classical electromagnetics. The third concept is a new metaphysics or metaphotonics that compares the photon as a particle in a void against the photon as a wave in a medium to see which best explain the twelve different aspects of light. Dr. Henry Lindner presents a compelling case that photons are waves in a medium and particles (electrons, protons, atoms) are wave-structures embedded in the new ether. Discussion of the three new principles is intended to increase the curiosity of photonics engineers to investigate these changes in the nature of light and matter.

  19. Cryo-EM Structure Determination Using Segmented Helical Image Reconstruction.

    PubMed

    Fromm, S A; Sachse, C

    2016-01-01

    Treating helices as single-particle-like segments followed by helical image reconstruction has become the method of choice for high-resolution structure determination of well-ordered helical viruses as well as flexible filaments. In this review, we will illustrate how the combination of latest hardware developments with optimized image processing routines have led to a series of near-atomic resolution structures of helical assemblies. Originally, the treatment of helices as a sequence of segments followed by Fourier-Bessel reconstruction revealed the potential to determine near-atomic resolution structures from helical specimens. In the meantime, real-space image processing of helices in a stack of single particles was developed and enabled the structure determination of specimens that resisted classical Fourier helical reconstruction and also facilitated high-resolution structure determination. Despite the progress in real-space analysis, the combination of Fourier and real-space processing is still commonly used to better estimate the symmetry parameters as the imposition of the correct helical symmetry is essential for high-resolution structure determination. Recent hardware advancement by the introduction of direct electron detectors has significantly enhanced the image quality and together with improved image processing procedures has made segmented helical reconstruction a very productive cryo-EM structure determination method. PMID:27572732

  20. Specimen Preparation for High-Resolution Cryo-EM.

    PubMed

    Passmore, L A; Russo, C J

    2016-01-01

    Imaging a material with electrons at near-atomic resolution requires a thin specimen that is stable in the vacuum of the transmission electron microscope. For biological samples, this comprises a thin layer of frozen aqueous solution containing the biomolecular complex of interest. The process of preparing a high-quality specimen is often the limiting step in the determination of structures by single-particle electron cryomicroscopy (cryo-EM). Here, we describe a systematic approach for going from a purified biomolecular complex in aqueous solution to high-resolution electron micrographs that are suitable for 3D structure determination. This includes a series of protocols for the preparation of vitrified specimens on various supports, including all-gold and graphene. We also describe techniques for troubleshooting when a preparation fails to yield suitable specimens, and common mistakes to avoid during each part of the process. Finally, we include recommendations for obtaining the highest quality micrographs from prepared specimens with current microscope, detector, and support technology. PMID:27572723

  1. EM modeling for GPIR using 3D FDTD modeling codes

    SciTech Connect

    Nelson, S.D.

    1994-10-01

    An analysis of the one-, two-, and three-dimensional electrical characteristics of structural cement and concrete is presented. This work connects experimental efforts in characterizing cement and concrete in the frequency and time domains with the Finite Difference Time Domain (FDTD) modeling efforts of these substances. These efforts include Electromagnetic (EM) modeling of simple lossless homogeneous materials with aggregate and targets and the modeling dispersive and lossy materials with aggregate and complex target geometries for Ground Penetrating Imaging Radar (GPIR). Two- and three-dimensional FDTD codes (developed at LLNL) where used for the modeling efforts. Purpose of the experimental and modeling efforts is to gain knowledge about the electrical properties of concrete typically used in the construction industry for bridges and other load bearing structures. The goal is to optimize the performance of a high-sample-rate impulse radar and data acquisition system and to design an antenna system to match the characteristics of this material. Results show agreement to within 2 dB of the amplitudes of the experimental and modeled data while the frequency peaks correlate to within 10% the differences being due to the unknown exact nature of the aggregate placement.

  2. Orthogonalizing EM: A design-based least squares algorithm

    PubMed Central

    Xiong, Shifeng; Dai, Bin; Huling, Jared; Qian, Peter Z. G.

    2016-01-01

    We introduce an efficient iterative algorithm, intended for various least squares problems, based on a design of experiments perspective. The algorithm, called orthogonalizing EM (OEM), works for ordinary least squares and can be easily extended to penalized least squares. The main idea of the procedure is to orthogonalize a design matrix by adding new rows and then solve the original problem by embedding the augmented design in a missing data framework. We establish several attractive theoretical properties concerning OEM. For the ordinary least squares with a singular regression matrix, an OEM sequence converges to the Moore-Penrose generalized inverse-based least squares estimator. For ordinary and penalized least squares with various penalties, it converges to a point having grouping coherence for fully aliased regression matrices. Convergence and the convergence rate of the algorithm are examined. Finally, we demonstrate that OEM is highly efficient for large-scale least squares and penalized least squares problems, and is considerably faster than competing methods when n is much larger than p. Supplementary materials for this article are available online. PMID:27499558

  3. Overexpression of OsEm1 encoding a group I LEA protein confers enhanced drought tolerance in rice.

    PubMed

    Yu, Jing; Lai, Yongmin; Wu, Xi; Wu, Gang; Guo, Changkui

    2016-09-16

    Drought is the greatest threat for crops, including rice. In an effort to identify rice genes responsible for drought tolerance, a drought-responsive gene OsEm1 encoding a group I LEA protein, was chosen for this study. OsEm1 was shown at vegetative stages to be responsive to various abiotic stresses, including drought, salt, cold and the hormone ABA. In this study, we generated OsEm1-overexpressing rice plants to explore the function of OsEm1 under drought conditions. Overexpression of OsEm1 increases ABA sensitivity and enhances osmotic tolerance in rice. Compared with wild type, the OsEm1-overexpressing rice plants showed enhanced plant survival ratio at the vegetative stage; moreover, over expression of OsEm1 in rice increased the expression of other LEA genes, including RAB16A, RAB16C, RAB21, and LEA3, likely protecting organ integrity against harsh environments. Interestingly, the elevated level of OsEm1 had no different phenotype compared with wild type under normal condition. Our findings suggest that OsEm1 is a positive regulator of drought tolerance and is potentially promising for engineering drought tolerance in rice. PMID:27524243

  4. Cystatin E/M Suppresses Tumor Cell Growth through Cytoplasmic Retention of NF-κB.

    PubMed

    Soh, Hendrick; Venkatesan, Natarajan; Veena, Mysore S; Ravichandran, Sandhiya; Zinabadi, Alborz; Basak, Saroj K; Parvatiyar, Kislay; Srivastava, Meera; Liang, Li-Jung; Gjertson, David W; Torres, Jorge Z; Moatamed, Neda A; Srivatsan, Eri S

    2016-06-15

    We and others have shown that the cystatin E/M gene is inactivated in primary human tumors, pointing to its role as a tumor suppressor gene. However, the molecular mechanism of tumor suppression is not yet understood. Using plasmid-directed cystatin E/M gene overexpression, a lentivirus-mediated tetracycline-inducible vector system, and human papillomavirus 16 (HPV 16) E6 and E7 gene-immortalized normal human epidermal keratinocytes, we demonstrated intracellular and non-cell-autonomous apoptotic growth inhibition of tumor cell lines and that growth inhibition is associated with cytoplasmic retention of NF-κB. We further demonstrated decreased phosphorylation of IκB kinase (IKKβ) and IκBα in the presence of tumor necrosis factor alpha (TNF-α), confirming the role of cystatin E/M in the regulation of the NF-κB signaling pathway. Growth suppression of nude mouse xenograft tumors carrying a tetracycline-inducible vector system was observed with the addition of doxycycline in drinking water, confirming that the cystatin E/M gene is a tumor suppressor gene. Finally, immunohistochemical analyses of cervical carcinoma in situ and primary tumors have shown a statistically significant inverse relationship between the expression of cystatin E/M and cathepsin L and a direct relationship between the loss of cystatin E/M expression and nuclear expression of NF-κB. We therefore propose that the cystatin E/M suppressor gene plays an important role in the regulation of NF-κB. PMID:27090639

  5. Prevention and Immunotherapy of Secondary Murine Alveolar Echinococcosis Employing Recombinant EmP29 Antigen

    PubMed Central

    Boubaker, Ghalia; Hemphill, Andrew; Huber, Cristina Olivia; Spiliotis, Markus; Babba, Hamouda; Gottstein, Bruno

    2015-01-01

    Alveolar echinococcosis (AE) is caused by infection with the larval stage of the tapeworm Echinococcus multilocularis. An increasing understanding of immunological events that account for the metacestode survival in human and murine AE infection prompted us to undertake explorative experiments tackling the potential of novel preventive and/or immunotherapeutic measures. In this study, the immunoprotective and immunotherapeutic ability of recombinant EmP29 antigen (rEmP29) was assessed in mice that were intraperitoneally infected with E. multilocularis metacestodes. For vaccination, three intraperitoneal injections with 20μg rEmP29 emulsified in saponin adjuvants were applied over 6 weeks. 2 weeks after the last boost, mice were infected, and at 90 days post-infection, rEmP29-vaccinated mice exhibited a median parasite weight that was reduced by 75% and 59% when compared to NaCl- or saponin–treated control mice, respectively. For immunotherapeutical application, the rEmP29 (20μg) vaccine was administered to experimentally infected mice, starting at 1 month post-infection, three times with 2 weeks intervals. Mice undergoing rEmP29 immunotherapy exhibited a median parasite load that was reduced by 53% and 49% when compared to NaCl- and saponin–treated control mice, respectively. Upon analysis of spleen cells, both, vaccination and treatment with rEmP29, resulted in low ratios of Th2/Th1 (IL-4/IFN-γ) cytokine mRNA and low levels of mRNA coding for IL-10 and IL-2. These results suggest that reduction of the immunosuppressive environment takes place in vaccinated as well as immunotreated mice, and a shift towards a Th1 type of immune response may be responsible for the observed increased restriction of parasite growth. The present study provides the first evidence that active immunotherapy may present a sustainable route for the control of AE. PMID:26053794

  6. EM-54 Technology Development In Situ Remediation Integrated Program. Annual report

    SciTech Connect

    Not Available

    1993-08-01

    The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years.

  7. An EM algorithm for estimating SPECT emission and transmission parameters from emissions data only.

    PubMed

    Krol, A; Bowsher, J E; Manglos, S H; Feiglin, D H; Tornai, M P; Thomas, F D

    2001-03-01

    A maximum-likelihood (ML) expectation-maximization (EM) algorithm (called EM-IntraSPECT) is presented for simultaneously estimating single photon emission computed tomography (SPECT) emission and attenuation parameters from emission data alone. The algorithm uses the activity within the patient as transmission tomography sources, with which attenuation coefficients can be estimated. For this initial study, EM-IntraSPECT was tested on computer-simulated attenuation and emission maps representing a simplified human thorax as well as on SPECT data obtained from a physical phantom. Two evaluations were performed. First, to corroborate the idea of reconstructing attenuation parameters from emission data, attenuation parameters (mu) were estimated with the emission intensities (lambda) fixed at their true values. Accurate reconstructions of attenuation parameters were obtained. Second, emission parameters lambda and attenuation parameters mu were simultaneously estimated from the emission data alone. In this case there was crosstalk between estimates of lambda and mu and final estimates of lambda and mu depended on initial values. Estimates degraded significantly as the support extended out farther from the body, and an explanation for this is proposed. In the EM-IntraSPECT reconstructed attenuation images, the lungs, spine, and soft tissue were readily distinguished and had approximately correct shapes and sizes. As compared with standard EM reconstruction assuming a fix uniform attenuation map, EM-IntraSPECT provided more uniform estimates of cardiac activity in the physical phantom study and in the simulation study with tight support, but less uniform estimates with a broad support. The new EM algorithm derived here has additional applications, including reconstructing emission and transmission projection data under a unified statistical model. PMID:11341711

  8. National Prehospital Evidence-Based Guidelines Strategy: A Summary for EMS Stakeholders.

    PubMed

    Martin-Gill, Christian; Gaither, Joshua B; Bigham, Blair L; Myers, J Brent; Kupas, Douglas F; Spaite, Daniel W

    2016-01-01

    Multiple national organizations have recommended and supported a national investment to increase the scientific evidence available to guide patient care delivered by Emergency Medical Services (EMS) and incorporate that evidence directly into EMS systems. Ongoing efforts seek to develop, implement, and evaluate prehospital evidence-based guidelines (EBGs) using the National Model Process created by a multidisciplinary panel of experts convened by the Federal Interagency Committee on EMS (FICEMS) and the National EMS Advisory Council (NEMSAC). Yet, these and other EBG efforts have occurred in relative isolation, with limited direct collaboration between national projects, and have experienced challenges in implementation of individual guidelines. There is a need to develop sustainable relationships among stakeholders that facilitate a common vision that facilitates EBG efforts. Herein, we summarize a National Strategy on EBGs developed by the National Association of EMS Physicians (NAEMSP) with involvement of 57 stakeholder organizations, and with the financial support of the National Highway Traffic Safety Administration (NHTSA) and the EMS for Children program. The Strategy proposes seven action items that support collaborative efforts in advancing prehospital EBGs. The first proposed action is creation of a Prehospital Guidelines Consortium (PGC) representing national medical and EMS organizations that have an interest in prehospital EBGs and their benefits to patient outcomes. Other action items include promoting research that supports creation and evaluates the impact of EBGs, promoting the development of new EBGs through improved stakeholder collaboration, and improving education on evidence-based medicine for all prehospital providers. The Strategy intends to facilitate implementation of EBGs by improving guideline dissemination and incorporation into protocols, and seeks to establish standardized evaluation methods for prehospital EBGs. Finally, the Strategy

  9. Methicillin-resistant Staphylococcus aureus in Ohio EMS Providers: A Statewide Cross-sectional Study.

    PubMed

    Orellana, Robert C; Hoet, Armando E; Bell, Christopher; Kelley, Christina; Lu, Bo; Anderson, Sarah E; Stevenson, Kurt B

    2016-01-01

    The objective was to determine the nasal carriage prevalence of methicillin-resistant Staphylococcus aureus (MRSA) among emergency medical service (EMS) personnel and the associated risk factors. A cross-sectional study was conducted among Ohio EMS personnel randomly sampled from 84 urban and rural agencies. Surveys assessing demographics, occupational history, health, cohabitation status, and hygiene practice were collected with nasal swabs from those who enrolled. Survey weight adjusted analysis was performed (1) to estimate MRSA nasal carriage prevalence of Ohio EMS providers, and (2) to identify variables associated with MRSA. MRSA was detected in 4.6% (13/280) EMS personnel sampled. After employing a survey-weighted analysis the following risk factors associated with MRSA carriage were identified: those who did not practice frequent hand hygiene after glove use (OR, 10.51; 95% CI, 2.54-43.45; P = 0.0012), living with someone with a recent staphylococcal infection (OR, 9.02; 95% CI, 1.03-78.98; P = 0.0470), and individuals with low frequency of hand washing (< 8 times per shift) (OR, 4.20; 95% CI 1.02-17.27; P = 0.0468). An additional risk factor identified through the logistic regression analysis on the study population was EMS workers with an open wound or skin infection (OR, 6.75; 95% CI, 1.25-36.36; P = 0.0262). However, this was not significant in the survey-weighted analysis. The high prevalence of MRSA in Ohio EMS personnel is both an occupational hazard and patient safety concern. Implementing methods to reinforce CDC guidelines for proper hygiene could decrease MRSA found in the EMS setting. Previous literature suggests that a reduction in MRSA colonization can lead to decreases in transmission and improved health for both patients and personnel. PMID:26516797

  10. OV-Wav: um novo pacote para análise multiescalar em astronomia

    NASA Astrophysics Data System (ADS)

    Pereira, D. N. E.; Rabaça, C. R.

    2003-08-01

    Wavelets e outras formas de análise multiescalar têm sido amplamente empregadas em diversas áreas do conhecimento, sendo reconhecidamente superiores a técnicas mais tradicionais, como as análises de Fourier e de Gabor, em certas aplicações. Embora a teoria dos wavelets tenha começado a ser elaborada há quase trinta anos, seu impacto no estudo de imagens astronômicas tem sido pequeno até bem recentemente. Apresentamos um conjunto de programas desenvolvidos ao longo dos últimos três anos no Observatório do Valongo/UFRJ que possibilitam aplicar essa poderosa ferramenta a problemas comuns em astronomia, como a remoção de ruído, a detecção hierárquica de fontes e a modelagem de objetos com perfis de brilho arbitrários em condições não ideais. Este pacote, desenvolvido para execução em plataforma IDL, teve sua primeira versão concluída recentemente e está sendo disponibilizado à comunidade científica de forma aberta. Mostramos também resultados de testes controlados ao quais submetemos os programas, com a sua aplicação a imagens artificiais, com resultados satisfatórios. Algumas aplicações astrofísicas foram estudadas com o uso do pacote, em caráter experimental, incluindo a análise da componente de luz difusa em grupos compactos de galáxias de Hickson e o estudo de subestruturas de nebulosas planetárias no espaço multiescalar.

  11. Immune protection of microneme 7 (EmMIC7) against Eimeria maxima challenge in chickens.

    PubMed

    Huang, Jingwei; Zhang, Zhenchao; Li, Menghui; Song, Xiaokai; Yan, Ruofeng; Xu, Lixin; Li, Xiangrui

    2015-10-01

    In the present study, the immune protective effects of recombinant microneme protein 7 of Eimeria maxima (rEmMIC7) and a DNA vaccine encoding this antigen (pVAX1-EmMIC7) on experimental challenge were evaluated. Two-week-old chickens were randomly divided into five groups. Experimental groups of chickens were immunized with 100 μg DNA vaccine pVAX1-MIC7 or 200 μg rEmMIC7, while control groups of chickens were injected with pVAX1 plasmid or sterile phosphate buffered saline (PBS). The results showed that the anti-EmMIC7 antibody titres in chickens of both rEmMIC7 and pVAX1-MIC7 groups were significantly higher as compared to PBS and pVAX1 control (P < .05). The splenocytes from both vaccinated groups of chickens displayed significantly greater proliferation response compared with the controls (P < .05). Serum from chickens immunized with pVAX1-MIC7 and rEmMIC7 displayed significantly high levels of interleukin-2, interferon-γ, IL-10, IL-17, tumour growth factor-β and IL-4 (P < .05) compared to those of negative controls. The challenge experiment results showed that both the recombinant antigen and the DNA vaccine could obviously alleviate jejunum lesions, body weight loss and enhance oocyst decrease ratio. The anti-coccidial index (ACI) of the pVAX1-MIC7 group was 167.84, higher than that of the recombinant MIC7 protein group, 167.10. Our data suggested that immunization with EmMIC7 was effective in imparting partial protection against E. maxima challenge in chickens and it could be an effective antigen candidate for the development of new vaccines against E. maxima. PMID:26181095

  12. Compositions of HIMU, EM1, and EM2 from global trends between radiogenic isotopes and major elements in ocean island basalts

    NASA Astrophysics Data System (ADS)

    Jackson, Matthew G.; Dasgupta, Rajdeep

    2008-11-01

    Sr and Pb isotopes exhibit global trends with the concentrations of major elements (SiO 2, TiO 2, FeO, Al 2O 3 and K 2O) and major elements ratios (CaO/Al 2O 3 and K 2O/TiO 2) in the shield-stage lavas from 18 oceanic hotspots (including Hawaii, Iceland, Galapagos, Cook-Australs, St. Helena, Cape Verde, Cameroon, Canary, Madeira, Comoros, Azores, Samoa, Society, Marquesas, Mascarene, Kerguelen, Pitcairn, and Selvagen). Based on the relationships between major elements and isotopes in ocean island basalts (OIBs), we find that the lavas derived from the mantle end members, HIMU (or high 'μ' = 238U/ 204Pb), EM1 (enriched mantle 1), EM2 (enriched mantle 2), and DMM (depleted MORB [mid-ocean ridge basalt] mantle) exhibit distinct major element characteristics: When compared to oceanic hotspots globally, the hotspots with a HIMU (radiogenic Pb-isotopes and low 87Sr/ 86Sr) component, such as St. Helena and Cook-Australs, exhibit high CaO/Al 2O 3, FeO T, and TiO 2 and low SiO 2 and Al 2O 3. EM1 (enriched mantle 1; intermediate 87Sr/ 86Sr and low 206Pb/ 204Pb; sampled by hotspots like Pitcairn and Kerguelen) and EM2 (enriched mantle 2; high 87Sr/ 86Sr and intermediate 206Pb/ 204Pb; sampled by hotspots like Samoa and Societies) exhibit higher K 2O concentrations and K 2O/TiO 2 weight ratios than HIMU lavas. EM1 lavas exhibit the lowest CaO/Al 2O 3 in the OIB dataset, and this sets EM1 apart from EM2. A plot of CaO/Al 2O 3 vs K 2O/TiO 2 perfectly resolves the four mantle end member lavas. Melting processes (pressure, temperature and degree of melting) fail to provide an explanation for the full spectrum of major element concentrations in OIBs. Such processes also fail to explain the correlations between major elements and radiogenic isotopes. Instead, a long, time integrated history of various parent-daughter elements appears to be coupled to major element and/or volatile heterogeneity in the mantle source. End member lava compositions are compared with experimental partial

  13. Pre-flight risk assessment in Emergency Medical Service (EMS) helicopters

    NASA Technical Reports Server (NTRS)

    Shively, R. J.

    1992-01-01

    The Emergency Medical Service (EMS) industry has been the subject of several television and newspaper articles (Harvey and Jensen, 1987) which emphasized the negative aspects, (e.g., fatalities and high accident rates), rather than the life saving services performed. Until recently, the accident rate of the EMS industry has been five times as high as that of other civil helicopters. This high accident rate has been coupled with the dramatic rise in the number of programs. The industry has built from a single service at its inception in 1972, to over 180 in 1987 (Spray, 1987), to the point that 93 percent of the contiguous U.S. is now covered by some type of EMS service. These factors prompted the National Transportation Safety Board (NTSB) to study the accidents that occurred between May 11, 1978 and December 3, 1986 (NTSB, 1988). The NTSB report concluded that 'Sound pilot judgment is central to safe flight operations.' They further stated that '... factors unique to EMS helicopter operations--such as the influence of the mission itself, program competition, and EMS program management perspectives--can drastically influence pilot judgment during the EMS mission.' One of the most difficult decisions that a pilot must make is whether to accept or decline a mission. A pre-flight risk assessment system (SAFE) was developed at NASA-Ames Research Center for civil EMS operations to aid pilots in making this decision objectively. The ability of the SAFE system to predict mission risk profiles was tested at an EMS facility. The results of this field study demonstrated that the usefulness of SAFE was highly dependent on the type of mission flown. SAFE is now being modified so that it can 'learn' with each mission flown. For example, after flying a mission to a particular site, an EMS pilot would input information about this mission into the system, such as new buildings, wires, or approach procedures. Then, the next time a pilot flew a similar mission or one to the same

  14. Rock 'Em, Sock 'Em!

    ERIC Educational Resources Information Center

    Waters, John K.

    2011-01-01

    K-12-level competitive robotics is growing in popularity around the country and worldwide. According to one of the leading organizers of these events, FIRST--For Inspiration and Recognition of Science and Technology--250,000 students from 56 countries take part in its competitions. FIRST Tech Challenge (FTC) is a yearly event the organization puts…

  15. Incubator embedded cell culture imaging system (EmSight) based on Fourier ptychographic microscopy.

    PubMed

    Kim, Jinho; Henley, Beverley M; Kim, Charlene H; Lester, Henry A; Yang, Changhuei

    2016-08-01

    Multi-day tracking of cells in culture systems can provide valuable information in bioscience experiments. We report the development of a cell culture imaging system, named EmSight, which incorporates multiple compact Fourier ptychographic microscopes with a standard multiwell imaging plate. The system is housed in an incubator and presently incorporates six microscopes. By using the same low magnification objective lenses as the objective and the tube lens, the EmSight is configured as a 1:1 imaging system that, providing large field-of-view (FOV) imaging onto a low-cost CMOS imaging sensor. The EmSight improves the image resolution by capturing a series of images of the sample at varying illumination angles; the instrument reconstructs a higher-resolution image by using the iterative Fourier ptychographic algorithm. In addition to providing high-resolution brightfield and phase imaging, the EmSight is also capable of fluorescence imaging at the native resolution of the objectives. We characterized the system using a phase Siemens star target, and show four-fold improved coherent resolution (synthetic NA of 0.42) and a depth of field of 0.2 mm. To conduct live, long-term dopaminergic neuron imaging, we cultured ventral midbrain from mice driving eGFP from the tyrosine hydroxylase promoter. The EmSight system tracks movements of dopaminergic neurons over a 21 day period. PMID:27570701

  16. Description and comparison of algorithms for correcting anisotropic magnification in cryo-EM images.

    PubMed

    Zhao, Jianhua; Brubaker, Marcus A; Benlekbir, Samir; Rubinstein, John L

    2015-11-01

    Single particle electron cryomicroscopy (cryo-EM) allows for structures of proteins and protein complexes to be determined from images of non-crystalline specimens. Cryo-EM data analysis requires electron microscope images of randomly oriented ice-embedded protein particles to be rotated and translated to allow for coherent averaging when calculating three-dimensional (3D) structures. Rotation of 2D images is usually done with the assumption that the magnification of the electron microscope is the same in all directions. However, due to electron optical aberrations, this condition is not met with some electron microscopes when used with the settings necessary for cryo-EM with a direct detector device (DDD) camera. Correction of images by linear interpolation in real space has allowed high-resolution structures to be calculated from cryo-EM images for symmetric particles. Here we describe and compare a simple real space method, a simple Fourier space method, and a somewhat more sophisticated Fourier space method to correct images for a measured anisotropy in magnification. Further, anisotropic magnification causes contrast transfer function (CTF) parameters estimated from image power spectra to have an apparent systematic astigmatism. To address this problem we develop an approach to adjust CTF parameters measured from distorted images so that they can be used with corrected images. The effect of anisotropic magnification on CTF parameters provides a simple way of detecting magnification anisotropy in cryo-EM datasets. PMID:26087140

  17. dbEM: A database of epigenetic modifiers curated from cancerous and normal genomes

    PubMed Central

    Singh Nanda, Jagpreet; Kumar, Rahul; Raghava, Gajendra P. S.

    2016-01-01

    We have developed a database called dbEM (database of Epigenetic Modifiers) to maintain the genomic information of about 167 epigenetic modifiers/proteins, which are considered as potential cancer targets. In dbEM, modifiers are classified on functional basis and comprise of 48 histone methyl transferases, 33 chromatin remodelers and 31 histone demethylases. dbEM maintains the genomic information like mutations, copy number variation and gene expression in thousands of tumor samples, cancer cell lines and healthy samples. This information is obtained from public resources viz. COSMIC, CCLE and 1000-genome project. Gene essentiality data retrieved from COLT database further highlights the importance of various epigenetic proteins for cancer survival. We have also reported the sequence profiles, tertiary structures and post-translational modifications of these epigenetic proteins in cancer. It also contains information of 54 drug molecules against different epigenetic proteins. A wide range of tools have been integrated in dbEM e.g. Search, BLAST, Alignment and Profile based prediction. In our analysis, we found that epigenetic proteins DNMT3A, HDAC2, KDM6A, and TET2 are highly mutated in variety of cancers. We are confident that dbEM will be very useful in cancer research particularly in the field of epigenetic proteins based cancer therapeutics. This database is available for public at URL: http://crdd.osdd.net/raghava/dbem. PMID:26777304

  18. Cryo-EM studies of the structure and dynamics of vacuolar-type ATPases.

    PubMed

    Mazhab-Jafari, Mohammad T; Rubinstein, John L

    2016-07-01

    Electron cryomicroscopy (cryo-EM) has significantly advanced our understanding of molecular structure in biology. Recent innovations in both hardware and software have made cryo-EM a viable alternative for targets that are not amenable to x-ray crystallography or nuclear magnetic resonance (NMR) spectroscopy. Cryo-EM has even become the method of choice in some situations where x-ray crystallography and NMR spectroscopy are possible but where cryo-EM can determine structures at higher resolution or with less time or effort. Rotary adenosine triphosphatases (ATPases) are crucial to the maintenance of cellular homeostasis. These enzymes couple the synthesis or hydrolysis of adenosine triphosphate to the use or production of a transmembrane electrochemical ion gradient, respectively. However, the membrane-embedded nature and conformational heterogeneity of intact rotary ATPases have prevented their high-resolution structural analysis to date. Recent application of cryo-EM methods to the different types of rotary ATPase has led to sudden advances in understanding the structure and function of these enzymes, revealing significant conformational heterogeneity and characteristic transmembrane α helices that are highly tilted with respect to the membrane. In this Review, we will discuss what has been learned recently about rotary ATPase structure and function, with a particular focus on the vacuolar-type ATPases. PMID:27532044

  19. Incubator embedded cell culture imaging system (EmSight) based on Fourier ptychographic microscopy

    PubMed Central

    Kim, Jinho; Henley, Beverley M.; Kim, Charlene H.; Lester, Henry A.; Yang, Changhuei

    2016-01-01

    Multi-day tracking of cells in culture systems can provide valuable information in bioscience experiments. We report the development of a cell culture imaging system, named EmSight, which incorporates multiple compact Fourier ptychographic microscopes with a standard multiwell imaging plate. The system is housed in an incubator and presently incorporates six microscopes. By using the same low magnification objective lenses as the objective and the tube lens, the EmSight is configured as a 1:1 imaging system that, providing large field-of-view (FOV) imaging onto a low-cost CMOS imaging sensor. The EmSight improves the image resolution by capturing a series of images of the sample at varying illumination angles; the instrument reconstructs a higher-resolution image by using the iterative Fourier ptychographic algorithm. In addition to providing high-resolution brightfield and phase imaging, the EmSight is also capable of fluorescence imaging at the native resolution of the objectives. We characterized the system using a phase Siemens star target, and show four-fold improved coherent resolution (synthetic NA of 0.42) and a depth of field of 0.2 mm. To conduct live, long-term dopaminergic neuron imaging, we cultured ventral midbrain from mice driving eGFP from the tyrosine hydroxylase promoter. The EmSight system tracks movements of dopaminergic neurons over a 21 day period. PMID:27570701

  20. Scalable and interactive segmentation and visualization of neural processes in EM datasets.

    PubMed

    Jeong, Won-Ki; Beyer, Johanna; Hadwiger, Markus; Vazquez, Amelio; Pfister, Hanspeter; Whitaker, Ross T

    2009-01-01

    Recent advances in scanning technology provide high resolution EM (Electron Microscopy) datasets that allow neuro-scientists to reconstruct complex neural connections in a nervous system. However, due to the enormous size and complexity of the resulting data, segmentation and visualization of neural processes in EM data is usually a difficult and very time-consuming task. In this paper, we present NeuroTrace, a novel EM volume segmentation and visualization system that consists of two parts: a semi-automatic multiphase level set segmentation with 3D tracking for reconstruction of neural processes, and a specialized volume rendering approach for visualization of EM volumes. It employs view-dependent on-demand filtering and evaluation of a local histogram edge metric, as well as on-the-fly interpolation and ray-casting of implicit surfaces for segmented neural structures. Both methods are implemented on the GPU for interactive performance. NeuroTrace is designed to be scalable to large datasets and data-parallel hardware architectures. A comparison of NeuroTrace with a commonly used manual EM segmentation tool shows that our interactive workflow is faster and easier to use for the reconstruction of complex neural processes. PMID:19834227

  1. Cryo-EM studies of the structure and dynamics of vacuolar-type ATPases

    PubMed Central

    Mazhab-Jafari, Mohammad T.; Rubinstein, John L.

    2016-01-01

    Electron cryomicroscopy (cryo-EM) has significantly advanced our understanding of molecular structure in biology. Recent innovations in both hardware and software have made cryo-EM a viable alternative for targets that are not amenable to x-ray crystallography or nuclear magnetic resonance (NMR) spectroscopy. Cryo-EM has even become the method of choice in some situations where x-ray crystallography and NMR spectroscopy are possible but where cryo-EM can determine structures at higher resolution or with less time or effort. Rotary adenosine triphosphatases (ATPases) are crucial to the maintenance of cellular homeostasis. These enzymes couple the synthesis or hydrolysis of adenosine triphosphate to the use or production of a transmembrane electrochemical ion gradient, respectively. However, the membrane-embedded nature and conformational heterogeneity of intact rotary ATPases have prevented their high-resolution structural analysis to date. Recent application of cryo-EM methods to the different types of rotary ATPase has led to sudden advances in understanding the structure and function of these enzymes, revealing significant conformational heterogeneity and characteristic transmembrane α helices that are highly tilted with respect to the membrane. In this Review, we will discuss what has been learned recently about rotary ATPase structure and function, with a particular focus on the vacuolar-type ATPases. PMID:27532044

  2. Association of Disomic Chromosome Loss with Ems-Induced Conversion in Yeast

    PubMed Central

    Campbell, Douglas

    1980-01-01

    Experimental tests with the yeast Saccharomyces cerevisiae of a previously proposed model suggesting a causal relationship between disomic chromosome loss (n + 1 → n) and centromere-adjacent mitotic gene conversion were performed. Disomic haploid cells heteroallelic at two loci on the left arm of chromosome III were exposed to ethyl methanesulfonate (EMS) under nonlethal conditions; EMS-induced prototrophic gene convertants were selected and tested for coincident chromosome loss. The principal results are: (1) The frequency of chromosome loss among EMS-induced gene convertants selected to arise near the centromere is markedly enhanced over basal levels and remains constant, independent of EMS exposure. There is little such enhancement among EMS-induced convertants selected to arise far from the centromere. (2) Chromosome loss is almost completely associated with induced conversion of the centromere-proximal allele at the centromere-adjacent heteroallelic locus. This result is identical to (and confirms) results found previously for spontaneous loss-associated conversion. (3) The conversion polarity at the centromere-adjacent locus among unselected (nonloss-associated) induced or spontaneous mitotic convertants is identical to that among meiotic convertants and markedly favors the contromere-distal allele. These findings are wholly consistent with, and strengthen, the hypothesis that structural involvement of centromeric regions in nearby recombinational events may interfere with proper segregational function and lead to mitotic chromosome loss. PMID:7021313

  3. Randomized controlled trial of a scoring aid to improve GCS scoring by EMS providers (Brief Report)

    PubMed Central

    Feldman, Amanda Lynn; Hart, Kimberly Ward; Lindsell, Christopher John; McMullan, Jason T.

    2014-01-01

    Objective Emergency medical services (EMS) personnel frequently use the Glasgow Coma Scale (GCS) to assess injured and critically ill patients. This study assessed the accuracy of EMS providers’ GCS scoring as well as the improvement in GCS assessment with the use of a scoring aid. Methods This randomized, controlled study was conducted in the emergency department (ED) of an urban, academic trauma center. Emergency medical technicians or paramedics who transported a patient to the ED were randomly assessed one of nine written scenarios, either with or without a GCS scoring aid. Scenarios were created by consensus of expert attending emergency medicine, EMS, and neurocritical care physicians with universal consensus agreement on GCS scores. Chi-square and student’s t-tests were used to compare groups. Results Of 180 participants, 178 completed the study. Overall, 73/178 (41%) participants gave a GCS score that matched the expert consensus score. GCS was correct in 22/88 (25%) of cases without the scoring aid. GCS was correct in 51/90 (57%) of cases with the scoring aid. Most (69%) of total GCS scores fell within one point of the expert consensus GCS score. Differences in accuracy were most pronounced in scenarios with a correct GCS of 12 or below. Sub-component accuracy was: eye 62%, verbal 70%, and motor 51%. Conclusion In this study, 60% of EMS participants provided inaccurate GCS estimates. Use of a GCS scoring aid improved accuracy of EMS GCS assessments. PMID:25199613

  4. Elimination of error factors, affecting EM and seismic inversions

    NASA Astrophysics Data System (ADS)

    Magomedov, M.; Zuev, M. A.; Korneev, V. A.; Goloshubin, G.; Zuev, J.; Brovman, Y.

    2013-12-01

    EM or seismic data inversions are affected by many factors, which may conceal the responses from target objects. We address here the contributions from the following effects: 1) Pre-survey spectral sensitivity factor. Preliminary information about a target layer can be used for a pre-survey estimation of the required frequency domain and signal level. A universal approach allows making such estimations in real time, helping the survey crew to optimize an acquisition process. 2) Preliminary velocities' identification and their dispersions for all the seismic waves, arising in a stratified media became a fast working tool, based on the exact analytical solution. 3) Vertical gradients effect. For most layers the log data scatter, requiring an averaging pattern. A linear gradient within each representative layer is a reasonable compromise between required inversion accuracy and forward modeling complexity. 4) An effect from the seismic source's radial component becomes comparable with vertical part for explosive sources. If this effect is not taken into account, a serious modeling error takes place. This problem has an algorithmic solution. 5) Seismic modeling is often based on different representations for a source formulated either for a force or to a potential. The wave amplitudes depend on the formulation, making an inversion result sensitive to it. 6) Asymmetrical seismic waves (modified Rayleigh) in symmetrical geometry around liquid fracture come from S-wave and merge with the modified Krauklis wave at high frequencies. A detail analysis of this feature allows a spectral range optimization for the proper wave's extraction. 7) An ultrasonic experiment was conducted to show different waves appearance for a super-thin water-saturated fracture between two Plexiglas plates, being confirmed by comparison with theoretical computations. 8) A 'sandwich effect' was detected by comparison with averaged layer's effect. This opens an opportunity of the shale gas direct

  5. Fabs enable single particle cryoEM studies of small proteins

    PubMed Central

    Wu, Shenping; Avila-Sakar, Agustin; Kim, JungMin; Booth, David S.; Greenberg, Charles H.; Rossi, Andrea; Liao, Maofu; Li, Xueming; Alian, Akram; Griner, Sarah L.; Juge, Narinobu; Yu, Yadong; Mergel, Claudia M.; Chaparro-Riggers, Javier; Strop, Pavel; Tampé, Robert; Edwards, Robert H.; Stroud, Robert M.; Craik, Charles S.; Cheng, Yifan

    2012-01-01

    Summary In spite of its recent achievements, the technique of single particle electron cryomicroscopy (cryoEM) has not been widely used to study proteins smaller than 100kDa, although it is a highly desirable application of this technique. One fundamental limitation is that images of small proteins embedded in vitreous ice do not contain adequate features for accurate image alignment. We describe a general strategy to overcome this limitation by selecting a fragment antigen binding (Fab) to form a stable and rigid complex with a target protein, thus providing a defined feature for accurate image alignment. Using this approach, we determined a three-dimensional structure of a ~65 kDa protein by single particle cryoEM. Because Fabs can be readily generated against a wide range of proteins by phage display, this approach is generally applicable to study many small proteins by single particle cryoEM. PMID:22483106

  6. Fabs enable single particle cryoEM studies of small proteins.

    PubMed

    Wu, Shenping; Avila-Sakar, Agustin; Kim, JungMin; Booth, David S; Greenberg, Charles H; Rossi, Andrea; Liao, Maofu; Li, Xueming; Alian, Akram; Griner, Sarah L; Juge, Narinobu; Yu, Yadong; Mergel, Claudia M; Chaparro-Riggers, Javier; Strop, Pavel; Tampé, Robert; Edwards, Robert H; Stroud, Robert M; Craik, Charles S; Cheng, Yifan

    2012-04-01

    In spite of its recent achievements, the technique of single particle electron cryomicroscopy (cryoEM) has not been widely used to study proteins smaller than 100 kDa, although it is a highly desirable application of this technique. One fundamental limitation is that images of small proteins embedded in vitreous ice do not contain adequate features for accurate image alignment. We describe a general strategy to overcome this limitation by selecting a fragment antigen binding (Fab) to form a stable and rigid complex with a target protein, thus providing a defined feature for accurate image alignment. Using this approach, we determined a three-dimensional structure of an ∼65 kDa protein by single particle cryoEM. Because Fabs can be readily generated against a wide range of proteins by phage display, this approach is generally applicable to study many small proteins by single particle cryoEM. PMID:22483106

  7. Physics-based simulation of EM and SM in TSV-based 3D IC structures

    SciTech Connect

    Kteyan, Armen; Sukharev, Valeriy; Zschech, Ehrenfried

    2014-06-19

    Evolution of stresses in through-silicon-vias (TSVs) and in the TSV landing pad due to the stress migration (SM) and electromigration (EM) phenomena are considered. It is shown that an initial stress distribution existing in a TSV depends on its architecture and copper fill technology. We demonstrate that in the case of proper copper annealing the SM-induced redistribution of atoms results in uniform distributions of the hydrostatic stress and concentration of vacancies along each segment. In this case, applied EM stressing generates atom migration that is characterized by kinetics depending on the preexisting equilibrium concentration of vacancies. Stress-induced voiding in TSV is considered. EM induced voiding in TSV landing pad is analyzed in details.

  8. Exploring conformational modes of macromolecular assemblies by multi-particle cryo-EM

    PubMed Central

    Spahn, Christian M.T.; Penczek, Pawel A.

    2009-01-01

    Summary Single particle cryo-electron microscopy (cryo-EM) is a technique aimed at structure determination of large macromolecular complexes in their unconstrained, physiological conditions. The power of the method has been demonstrated in selected studies where for highly symmetric molecules the resolution attained permitted backbone tracing. However, most molecular complexes appear to exhibit intrinsic conformational variability necessary to perform their functions. Therefore, it is now increasingly recognized that sample heterogeneity constitutes a major methodological challenge for cryo-EM. To overcome it dedicated experimental and particularly computational multi-particle approaches have been developed. Their applications point to the future of cryo-EM as an experimental method uniquely suited to visualize the conformational modes of large macromolecular complexes and machines. PMID:19767196

  9. EM algorithm applied for estimating non-stationary region boundaries using electrical impedance tomography

    NASA Astrophysics Data System (ADS)

    Khambampati, A. K.; Rashid, A.; Kim, B. S.; Liu, Dong; Kim, S.; Kim, K. Y.

    2010-04-01

    EIT has been used for the dynamic estimation of organ boundaries. One specific application in this context is the estimation of lung boundaries during pulmonary circulation. This would help track the size and shape of lungs of the patients suffering from diseases like pulmonary edema and acute respiratory failure (ARF). The dynamic boundary estimation of the lungs can also be utilized to set and control the air volume and pressure delivered to the patients during artificial ventilation. In this paper, the expectation-maximization (EM) algorithm is used as an inverse algorithm to estimate the non-stationary lung boundary. The uncertainties caused in Kalman-type filters due to inaccurate selection of model parameters are overcome using EM algorithm. Numerical experiments using chest shaped geometry are carried out with proposed method and the performance is compared with extended Kalman filter (EKF). Results show superior performance of EM in estimation of the lung boundary.

  10. Direct and indirect measures of speech articulator motions using low power EM sensors

    SciTech Connect

    Barnes, T; Burnett, G; Gable, T; Holzrichter, J F; Ng, L

    1999-05-12

    Low power Electromagnetic (EM) Wave sensors can measure general properties of human speech articulator motions, as speech is produced. See Holzrichter, Burnett, Ng, and Lea, J.Acoust.Soc.Am. 103 (1) 622 (1998). Experiments have demonstrated extremely accurate pitch measurements (< 1 Hz per pitch cycle) and accurate onset of voiced speech. Recent measurements of pressure-induced tracheal motions enable very good spectra and amplitude estimates of a voiced excitation function. The use of the measured excitation functions and pitch synchronous processing enable the determination of each pitch cycle of an accurate transfer function and, indirectly, of the corresponding articulator motions. In addition, direct measurements have been made of EM wave reflections from articulator interfaces, including jaw, tongue, and palate, simultaneously with acoustic and glottal open/close signals. While several types of EM sensors are suitable for speech articulator measurements, the homodyne sensor has been found to provide good spatial and temporal resolution for several applications.