Science.gov

Sample records for issues technical progress

  1. CTBT technical issues handbook

    SciTech Connect

    Zucca, J.J.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  2. Technical issues: logistics. AAMC.

    PubMed

    Stillman, P L

    1993-06-01

    The author states that she became interested in standardized patients (SPs) around 20 years ago as a means of developing a more uniform and effective way to provide instruction and evaluation of basic clinical skills. She reflects upon in detail: (1) the logistics of using SPs in teaching; (2) how SPs are used in assessment; (3) what aspects of performance SPs can be trained to record and evaluate; (4) issues concerning checklists; (5) evaluation of interviewing skills; (6) evaluation of written communication skills; (7) importance of defining what is being tested; (8) various kinds and uses of inter-station exercises and problems of scoring them; (9) case development and the various sources for case material; (10) ways to generate scores; (11) selecting and training SPs; (12) role of the faculty and primary importance of bedside training with real patients; and (13) pros and cons of national versus single-school efforts to use SPs. She concludes by cautioning that further research must be done before SPs can be used for high-stakes certifying and licensing examinations. PMID:8507311

  3. Technical Progress Report

    SciTech Connect

    Paul D. Ronney

    2004-08-26

    An ignition source was constructed that is capable of producing a pulsed corona discharge for the purpose of igniting mixtures in a test chamber. The corona generator can also be used as the ignition source for one cylinder on a test engine. The first tests were performed in a cylindrical shaped chamber to study the characteristics of the corona and analyze various electrode geometries. Next a test chamber was constructed that closely represented the dimensions of the combustion chamber of the test engine at USC. Combustion tests were performed in this chamber and various electrode diameters and geometries were tested. Higher peak pressures and faster pressure rise times were realized consistently in all test chambers versus standard spark plug ignition. A test engine was purchased for the project that has two spark plug ports per cylinder to The data acquisition and control system hardware for the USC engine lab was updated with new equipment. New software was also developed to perform the engine control and data acquisition functions including cylinder pressure monitoring. A ceramic corona electrode has been designed that fits in the new test engine and is capable of withstanding the pressures and temperatures encountered inside the combustion chamber. The corona ignition system was tested on the engine and an increase in both peak pressure and IMEP were seen in the initial test. There are issues that must be addressed before on-engine testing can continue such as EMF interference from the corona generator and electrical insulation on portions of the piston and cylinder head to prevent arcing. The EMF issue can be solved with proper shielding and grounding and various ceramic coatings are being researched for electrical insulation.

  4. Technical progress report

    SciTech Connect

    1996-10-01

    This report summarizes experimental and theoretical work in basic nuclear physics carried out between October 1, 1995, the closing of our last Progress Report, and September 30, 1996 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG03-93ER-40774 and DE-FG03-95ER-40913 with the United States Department of Energy. The experimental contract supports broadly-based experimental research in intermediate energy nuclear physics. This report includes results from studies of Elementary Systems involving the study of the structure of the nucleon via polarized high-energy positron scattering (the HERMES experiment) and lower energy pion scattering from both polarized and unpolarized nucleon targets. Results from pion- and kaon-induced reactions in a variety of nuclear systems are reported under the section heading Meson Reactions; the impact of these and other results on understanding the nucleus is presented in the Nuclear Structure section. In addition, new results from scattering of high-energy electrons (from CEBAF/TJNAF) and pions (from KEK) from a broad range of nuclei are reported in the section on Incoherent Reactions. Finally, the development and performance of detectors produced by the laboratory are described in the section titled Instrumentation.

  5. Technical support services to assist the Office of Environmental Audit in conducting the DOE Environmental Survey and to provide technical assistance on Environmental Compliance issues. Technical progress report, February 16, 1991--August 16, 1991

    SciTech Connect

    1995-07-01

    HALLIBURTON NUS received authorization from DOE on August 14, 1987 to provide technical support to assist the Office of Environmental Audit (OEV) in conducting the DOE Environmental Survey and to provide technical assistance on environmental compliance issues. The overall contract is to accomplish a one-time, no-fault baseline Survey of all DOE operating facilities, and to provide technical assistance and support for the resolution of environmental compliance issues. NUS has completed the Preliminary Reports and continues to support DOE on the Prioritization and Tiger Team Assessment efforts. The project requires a broad range of environmental protection expertise, necessitating senior-level personnel as the primary project staff. Many of the tasks assigned by DOE require quick startup and performance, and several tasks may be active at any one time. The objective of the DOE Environmental Survey Program is to identify and prioritize areas of existing environmental risk at 36 DOE facilities. NUS`role is to technically assist the Office of Environmental Audit in the implementation of the Surveys.

  6. Hot gas filtration technical issues

    SciTech Connect

    Pontius, D.H.

    1995-11-01

    The primary objective of this research has been to provide an understanding of factors pertinent to the development of an effective filtration system for removing particles from high-temperature, high-pressure gas streams in advanced power generation systems under development by the Department of Energy. Information used to define the filtration system issues was compiled from the Morgantown Energy Technology Center (METC) Contractors Conferences, specific tasks assigned to Southern Research Institute, meetings with METC personnel and contractors, and other conferences and workshops organized by METC. Initial research and pilot scale installations have shown that there are some potential problem areas. Thick ash deposits have formed, bridging from passive surfaces to the filter material and between filter candles. A great number of ceramic filters have broken in various experimental and demonstration devices, especially during long-term testing. This paper reviews particulate characteristics (effects on filtration processes, conventional fly ash, gasifier char, PFBC ash, and detailed studies of PFBC ash) and ceramic filter materials (general issues, thermal stress, clay-bonded SiC filter materials, and monolithic ceramic materials).

  7. Technical review of externalities issues. Final report

    SciTech Connect

    Niemeyer, V.

    1994-12-01

    Externalities has become the catchword for a major experiment in electric utility regulation. Together with increased competition as a means for economic regulation, this experiment represents a potential revolution in how electric utilities are regulated. It is very important for utilities and policy makers to understand the technical issues and arguments driving the externality experiment. This Technical Review presents four papers covering topics in economics that may play important roles in this revolution. The four papers are: Economic Issues in the Application of Externalities to Electricity Resource Selection; Climate Change, the Marginal Cost of Carbon Dioxide Emissions and the Implications for Carbon Dioxide Emissions Adders; Positive Externalities and Benefits from Electricity; and Socioeconomic Effects of Externality Adders for Electric Utility Emissions.

  8. Progress Towards the Investigation of Technical Issues Relevant to the Design of an Aircraft Wake Vortex Advisory System (WakeVAS)

    NASA Technical Reports Server (NTRS)

    Rutishauser, David K.

    2003-01-01

    Wake vortex separations applied to aircraft during instrument operations have been shown to potentially introduce inefficiencies in air traffic operations during certain weather conditions conducive to short duration wake hazards between pairs of landing aircraft. NASA Langley Research Center (LaRC) demonstrated an integration of technologies that provided real-time observations and predictions of aircraft wake behavior, from which reduced wake spacing from the current criteria was derived. In order to take this proof of concept to an operational prototype system, NASA has been working in cooperation with the FAA and other government and industry members to design operational concepts for a Wake Vortex Advisory System (WakeVAS). In addition to concept development, open research issues are being addressed and activities to quantify system requirements and specifications are currently underway. This paper describes the technological issues relevant to WakeVAS development and current NASA efforts to address these issues.

  9. 48 CFR 2052.211-71 - Technical progress report.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Technical progress report... Technical progress report. As prescribed at 2011.104-70(b), the contracting officer shall insert the... solicitation. Technical Progress Report (JAN 1993) The contractor shall provide a monthly Technical...

  10. 48 CFR 2052.211-71 - Technical progress report.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Technical progress report... Technical progress report. As prescribed at 2011.104-70(b), the contracting officer shall insert the... solicitation. Technical Progress Report (JAN 1993) The contractor shall provide a monthly Technical...

  11. 48 CFR 2052.211-71 - Technical progress report.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Technical progress report... Technical progress report. As prescribed at 2011.104-70(b), the contracting officer shall insert the... solicitation. Technical Progress Report (JAN 1993) The contractor shall provide a monthly Technical...

  12. 48 CFR 2052.211-71 - Technical progress report.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Technical progress report... Technical progress report. As prescribed at 2011.104-70(b), the contracting officer shall insert the... solicitation. Technical Progress Report (JAN 1993) The contractor shall provide a monthly Technical...

  13. The Virtual Orchestra: Technical and Creative Issues

    NASA Astrophysics Data System (ADS)

    BIANCHI, F. W.; CAMPBELL, R. H.

    2000-04-01

    The interactive multi-channel computer music system known as the Virtual Orchestra has been used several times in professional opera and theater as an alternative to a live pit orchestra. The technical issues associated with this emerging technology, and the logistical problems of implementing it are discussed. In addition, this paper describes the equally important issues regarding the creative impact this will have on the industry. In particular, this paper explores the role of the musician/technologist and suggests that many of the fundamental premises of opera production will change as the industry begins to retool. This would include the way opera is rehearsed and performed, how it is created and disseminated, and how it will adjust to changing demographics.

  14. Some technical issues in managing PCBs.

    PubMed

    Qi, Zhifu; Buekens, Alfons; Liu, Jie; Chen, Tong; Lu, Shengyong; Li, Xiaodong; Cen, Kefa

    2014-05-01

    Polychlorinated biphenyls (PCBs) were important industrial chemicals featuring high thermal and chemical stability and low flammability. They were widely used as dielectric and thermal fluid in closed electro-technical applications (transformers, capacitors…) and also in numerous dispersive uses, ranking from auto-copying paper to sealant or coatings. During the 1960s, severe environmental consequences started becoming apparent. The stability of PCBs contributed to their persistence in the environment, their lipophilic character to bio-magnification. Fish-eating species seemed threatened in their existence. In Japan and in Taiwan, thousands of people consumed PCB-contaminated oil. The production of PCBs stopped completely during the 1980s. Usage could continue in closed applications only. In this paper, particular attention is given to two issues: the cleaning of PCB electric transformers and the potential impact of PCB-containing building materials. Other contributions will cover the management and treatment of PCB-contaminated soil, sludge or fly ash. The complete survey is being prepared by request of the Knowledge Center for Engineers and Professionals. PMID:23812787

  15. Equity Issues in Career and Technical Education. Information Series.

    ERIC Educational Resources Information Center

    Scott, Michael L., Ed.; Annexstein, Leslie T.; Ordover, Eileen L.; Esters, Levon T.; Bowen, Blannie E.; Reeve, Edward M.

    Students in career and technical education programs increasingly represent gender, racial, and cultural diversity. Students with disabilities from a wide range of backgrounds are entering the work force and career and technical education programs. This paper takes a critical look at equity issues in career and technical education. After a brief…

  16. Retooling Career Technical Education. Issue Brief

    ERIC Educational Resources Information Center

    National Governors Association, 2007

    2007-01-01

    Career technical education (CTE) rests at the nexus of governors' efforts to improve their states' K-16 education system and develop an economy supportive of innovation. Traditional CTE programs, such as carpentry, which emphasized employment in a specific trade, are evolving into programs that now educate students for a range of careers in the…

  17. Sludge Treatment Evaluation: 1992 Technical progress

    SciTech Connect

    Silva, L J; Felmy, A R; Ding, E R

    1993-01-01

    This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO[sub 3], NO[sub 2], PO[sub 4], SO[sub 4], and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model.

  18. International Linear Collider-A Technical Progress Report

    SciTech Connect

    Elsen, Eckhard; Harrison, Mike; Hesla, Leah; Ross, Marc; Royole-Degieux, Perrine; Takahashi, Rika; Walker, Nicholas; Warmbein, Barbara; Yamamoto, Akira; Yokoya, Kaoru; Zhang, Min; /Beijing, Inst. High Energy Phys.

    2011-11-04

    The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

  19. Technical progress by major task. Semiannual technical progress report, September 29, 1997--March 29, 1998

    SciTech Connect

    1998-04-01

    The technical progress achieved during the period 29 September 1997 through 29 March 1998 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described in this report. The report is organized by program task structure: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; RTG fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair.

  20. Particulate Hot Gas Stream Cleanup Technical Issues

    SciTech Connect

    Dorchak, T.P.; Pontiu, D.H.; Snyder, T.R.

    1996-12-31

    The nature of the collected ash has been identified as an issue creating barriers to the commercialization of advanced particle control technologies. Since most of the emphasis and extended operation of Hot Gas Stream Cleanup (HGCU) facilities have been with ceramic candle filters, problems with ash characteristics can be understood in terms of their effects on these control devices. This project is designed to identify the ways ash characteristics affect advanced particle control technologies, to construct and maintain a data base of HGCU ashes and their measured characteristics, and to relate these characteristics to the operation and performance of these facilities. The key characteristics of the collected ash are the morphology of the overall ash aggregate (porosity, geometry of the pores, specific surface area, etc.), and the cohesivity of the aggregate. Our data base currently comprises 242 ash samples from 12 combustion and gasification (HGCU) sources.

  1. Particulate hot gas stream cleanup technical issues

    SciTech Connect

    1998-09-01

    This is the tenth in a series of quarterly reports describing the activities performed under Contract No. DE-AC21-94MC31160. Analyses of Hot Gas Stream Cleanup (HGCU) ashes and descriptions of filter performance address aspects of filter operation that are apparently linked to the characteristics of the collected ash or the performance of the ceramic bed filter elements. Task I is designed to generate a data base of the key characteristics of ashes collected from operating advanced particle filters (APFS) and to relate these ash properties to the operation and performance of these filters. Task 2 concerns testing and failure analysis of ceramic filter elements. Under Task I during the past quarter, analyses were performed on a particulate sample from the Transport Reactor Demonstration Unit (TRDU) located at the University of North Dakota Energy and Environmental Research Center. Analyses are in progress on ash samples from the Advanced Particulate Filter (APF) at the Pressurized Fluidized-Bed Combustor (PFBC) that was in operation at Tidd and ash samples from the Pressurized Circulating Fluid Bed (PCFB) system located at Karhula, Finland. A site visit was made to the Power Systems Development Facility (PSDF) to collect ash samples from the filter vessel and to document the condition of the filter vessel with still photographs and videotape. Particulate samples obtained during this visit are currently being analyzed for entry into the Hot Gas Cleanup (HGCU) data base. Preparations are being made for a review meeting on ash bridging to be held at Department of Energy Federal Energy Technology Center - Morgantown (DOE/FETC-MGN) in the near future. Most work on Task 2 was on hold pending receipt of additional funds; however, creep testing of Schumacher FT20 continued. The creep tests on Schumacher FT20 specimens just recently ended and data analysis and comparisons to other data are ongoing. A summary and analysis of these creep results will be sent out shortly. Creep

  2. Particulate Hot Gas Stream Cleanup Technical Issues

    SciTech Connect

    None, None

    1998-08-31

    This is the fifteenth quarterly report describing the activities performed under Contract No. DE-AC21-94MC31160. The analyses of Hot Gas Stream Cleanup (HGCU) ashes and descriptions of filter performance studied under this contract are designed to address problems with filter operation that are apparently linked to characteristics of the collected ash. Task 1 is designed to generate a data bank of the key characteristics of ashes collected from operating advanced particle filters (APFs) and to relate these ash properties to the operation and performance of these filters and their components. APF operations have also been limited by the strength and durability of the ceramic materials that have served as barrier filters for the capture of entrained HGCU ashes. Task 2 concerns testing and failure analyses of ceramic filter elements currently used in operating APFs and the characterization and evaluation of new ceramic materials. Task 1 research activities during the past quarter included characterizations of samples collected during a site visit on May 18 to the Department of Energy / Southern Company Services Power Systems Development Facility (PSDF) and a particulate sample collected in the Westinghouse filter at Sierra Pacific Power Company's Piñon Pine Power Project. Analysis of this Piñon Pine sample is ongoing: however, this report contains the results of analyses completed to date. Significant accomplishments were achieved on the HGCU data bank during this reporting quarter. The data bank was prepared for presentation at the Advanced Coal-Based Power and Environmental Systems 98 Conference scheduled for July, 1998. Task 2 work during the past quarter consisted of testing two Dupont PRD-66C candle filters, one McDermott ceramic composite candle filter, one Blasch 4-270 candle filter, and one Specific Surface cordierite candle filter. Tensile and thermal expansion testing is complete and the rest of the testing is in progress. Also, some 20-inch long Dupont

  3. Particulate hot gas stream cleanup technical issues

    SciTech Connect

    1998-09-01

    This is the eleventh in a series of quarterly reports describing the activities performed under Contract No. DE-AC21-94MC31160. Analyses of Hot Gas Stream Cleanup (HGCU) ashes and descriptions of filter performance address aspects of filter operation that are apparently linked to the characteristics of the collected ash or the performance of the ceramic bed filter elements. Task 1 is designed to generate a data base of the key characteristics of ashes collected from operating advanced particle filters (APFS) and to relate these ash properties to the operation and performance of these filters. Task 2 concerns testing and failure analysis of ceramic filter elements. Under Task 1 during the past quarter, analyses were completed on samples obtained during a site visit to the Power Systems Development Facility (PSDF). Analyses are in progress on ash samples from the Advanced Particulate Filter (APF) at the Pressurized Fluidized-Bed Combustor (PFBC) that was in operation at Tidd and ash samples from the Pressurized Circulating Fluid Bed (PCFB) system located at Karhula, Finland. An additional analysis was performed on a particulate sample from the Transport Reactor Demonstration Unit (TRDU) located at the University of North Dakota Energy and Environmental Research Center. A manuscript and poster were prepared for presentation at the Advanced Coal-Based Power and Environmental Systems `97 Conference scheduled for July 22 - 24, 1997. A summary of recent project work covering the mechanisms responsible for ash deposit consolidation and ash bridging in APF`s collecting PFB ash was prepared and presented at FETC-MGN in early July. The material presented at that meeting is included in the manuscript prepared for the Contractor`s Conference and also in this report. Task 2 work during the past quarter included mechanical testing and microstructural examination of Schumacher FT20 and Pall 326 as- manufactured, after 540 hr in service at Karhula, and after 1166 hr in service at

  4. The importance of defining technical issues in interagency environmental negotiations

    USGS Publications Warehouse

    Lamb, B.L.; Burkardt, N.; Taylor, J.G.

    2001-01-01

    We studied the role of technical clarity in successful multi-party negotiations. Our investigations involved in-depth interviews with individuals who were the principal participants in six consultations conducted under the Federal Energy Regulatory Commission's (FERC) hydroelectric power project licensing process. Technical clarity was especially important in the cases we studied because they concerned questions that were science-based. The principal issues in the six cases were fish passage, instream flow for fish habitat, and entrainment of fish in hydropower turbines. We concluded that technical clarity was one of the most critical elements in these conflicts. The most successful negotiations were marked by a shared understanding of technical issues among the parties.

  5. MELCOR analyses for accident progression issues

    SciTech Connect

    Dingman, S.E.; Shaffer, C.J.; Payne, A.C.; Carmel, M.K. )

    1991-01-01

    Results of calculations performed with MELCOR and HECTR in support of the NUREG-1150 study are presented in this report. The analyses examined a wide range of issues. The analyses included integral calculations covering an entire accident sequence, as well as calculations that addressed specific issues that could affect several accident sequences. The results of the analyses for Grand Gulf, Peach Bottom, LaSalle, and Sequoyah are described, and the major conclusions are summarized. 23 refs., 69 figs., 8 tabs.

  6. Progress in Scientific and Technical Communications, 1968 Annual Report.

    ERIC Educational Resources Information Center

    Federal Council for Science and Technology, Washington, DC. Committee on Scientific and Technical Information.

    This sixth annual report describes progress achieved by the Federal Government in improving the communication of scientific and technical information to support and enhance national science and technology. Included in the report are details regarding the scientific and technical activities of individual Federal Agencies, such as the Atomic Energy…

  7. Introduction: Policy and Technical Contexts of National Assessment of Educational Progress Validity Studies.

    ERIC Educational Resources Information Center

    Baker, Eva L.

    1996-01-01

    A series of studies by the Technical Review Panel (TRP) of the National Assessment of Educational Progress (NAEP) to improve the quality and utility of the NAEP is introduced, with a description of the NAEP, the creation of the TRP, the education policy issues that influenced the selection of research topics, and the relationship among the…

  8. The Knowledge Warehouse: Technical Issues and The Knowledge Warehouse: Legal and Commercial Issues.

    ERIC Educational Resources Information Center

    Buckingham, Michael; Williamson, R.

    1988-01-01

    The first of two articles discusses the technical issues of text transfer and processing encountered by the Knowledge Warehouse project. The second describes the development of the concept of a national electronic archive, and discusses issues such as contractual agreements, access control, copyrights, and commercial aspects of value added…

  9. Solar lease grant program. Technical progress report

    SciTech Connect

    Not Available

    1981-04-01

    Progress on a lease program for the installation of a solar water heater with no installation charge is reported. Information on the announcement of the program, the selection of participants, the contractural agreement, progress on installation of equipment, monitoring, and evaluation is summarized. The status of the budget concerned with the program is announced. Forms used for applications for the program and an announcement from Resource Alternatives for Cilco customers are presented.

  10. ERIP invention 637. Technical progress report 2nd quarter, April 1997--June 1997

    SciTech Connect

    Thacker, G.W.

    1997-07-22

    This technical report describes progress in the development of the Pegasus plow, a stalk and root embedding apparatus. Prototype testing is reported, and includes the addition of precision tillage. Disease data, organic matter, and nitrogen levels results are very briefly described. Progress in marketing is also reported. Current marketing issues include test use by cotton and wheat growers, establishment of dealer relationships, incorporation of design modifications, expansion of marketing activities, and expansion of loan and lease program.

  11. Economic Issues in the Networking of Library Technical Support Services.

    ERIC Educational Resources Information Center

    Gassler, Scott

    To acquaint library administrators with the economic issues of library networking, this guide of the Western Interstate Library Coordinating Organization (WILCO) outlines possible problems of a national technical services network. Market structures such as monopolies and oligopolies can exist among automated services, brokered services, and in the…

  12. Certification of Postsecondary Career and Technical Instructors: Issues for Debate

    ERIC Educational Resources Information Center

    Bazile, Stanley A.; Walter, Richard A.

    2009-01-01

    Recently, the long-standing, though relatively low key, debate surrounding certification requirements for career and technical instructors at the postsecondary level has been revived as a critical issue. These discussions have lead to extensive examination of: (1) current credential requirements for instructors; (2) recent changes to state and…

  13. Geomagnetically Induced Currents: Progress and Issues

    NASA Astrophysics Data System (ADS)

    Thomson, Alan

    2010-05-01

    Geomagnetically induced currents (GIC) are a hazard to conducting networks such as high-voltage power and pipeline grids. GIC have been known for decades to affect power systems at higher latitudes (e.g. Europe and North America), although more recently GIC have also been found to affect power networks at middle and lower latitudes. Mitigating the effects of GIC remains an issue for the power and pipeline industries and for governments concerned with the societal and economic implications. To understand, e.g. to model and predict, GIC in conducting grids needs expertise drawn from electrical engineering, geophysics and space weather science - a truly multi-disciplinary undertaking. In terms of geophysics and space physics, issues such as Earth structure (e.g. 3D versus 1D mantle and lithospheric conductivity structure), ocean/continent conductivity contrasts, ionospheric current systems and their variability and Sun-Earth magnetic interactions are all relevant. The start of solar cycle 24 provides an opportune time to consider the status of GIC research and to assess what new studies are required in geophysical modelling and in hazard analysis. What do we need to improve on to better specify/predict GIC flowing in power grids, from ‘up-stream' observations of coronal mass ejections through to geomagnetic field measurements made during magnetic storms? In this invited review we will consider aspects of a) Measurement: how do we measure GIC in grids; b) Analysis: how do measured GIC relate to geophysical and space physics data; c) Modelling: what methods exist for modelling GIC, again in relation to other data, and how accurate are models; and d) Prediction: how predictable are GIC and what are the implications for, e.g., the power industry and national governments. We will review the more recent developments in GIC and related geomagnetism and space weather science. We will outline what issues are widely believed to now be understood and what issues remain to be

  14. Issues in career progression in microbiology.

    PubMed

    Purser, L; Sheasby, L; Ward, L

    2004-12-01

    We are three highly motivated university graduates who are looking to begin careers in microbiology. We each attained a degree in a biological science discipline, one in biochemistry, one in microbial and cellular biology and one in biomedical sciences (the last gained in South Africa). However, the career obstacles we have so far encountered require us to be Olympic hurdlers. This article highlights the issues, and the advantages and disadvantages of the options open to us. We look at each career option in turn and describe the difficulties encountered. PMID:15779810

  15. Technical Issues in Implementing DTN in a Flight Software Architecture

    NASA Technical Reports Server (NTRS)

    Oyake, Amalaye

    2007-01-01

    This slide presentation reviews some of the technical issues in implementing Delay Tolerant Networking (DTN) in a enviornments that lack continuous network connectivity, such as spacecraft in deepspace or submarines. In a DTN, asynchronous variable-length messages (called bundles) are routed in a store and forward manner between participating nodes over a heterogeneous network. The review examines the enabling technologies, the porting steps and issues, operational scenarios for DTN. There is a review of the Licklider Transmission Protocol (LTP) aka Long-haul Transmission Protocol. Also included is a brief review of the current uses of DTN.

  16. Final Technical Progress Report NANOSTRUCTURED MAGNETIC MATERIALS

    SciTech Connect

    Charles M. Falco

    2012-09-13

    This report describes progress made during the final phase of our DOE-funded program on Nanostructured Magnetic Materials. This period was quite productive, resulting in the submission of three papers and presentation of three talks at international conferences and three seminars at research institutions. Our DOE-funded research efforts were directed toward studies of magnetism at surfaces and interfaces in high-quality, well-characterized materials prepared by Molecular Beam Epitaxy (MBE) and sputtering. We have an exceptionally well-equipped laboratory for these studies, with: Thin film preparation equipment; Characterization equipment; Equipment to study magnetic properties of surfaces and ultra-thin magnetic films and interfaces in multi-layers and superlattices.

  17. Technical issues in licensing low-level radioactive waste facilities

    SciTech Connect

    Junkert, R.

    1993-03-01

    The California Department of Health Service spent two years in the review of an application for a low-level radioactive waste disposal facility in California. During this review period a variety of technical issues had to be evaluated and resolved. One of the first issues was the applicability and use of NRC guidance documents for the development of LLW disposal facilities. Other technical issues that required intensive evaluations included surface water hydrology, seismic investigation, field and numerical analysis of the unsaturated zone, including a water infiltration test. Source term verification became an issue because of one specific isotope that comprised more than 90% of the curies projected for disposal during the operational period. The use of trench liners and the proposed monitoring of the unsaturated zone were reviewed by a highly select panel of experts to provide guidance on the need for liners and to ensure that the monitoring system was capable of monitoring sufficient representative areas for radionuclides in the soil, soil gas, and soil moisture. Finally, concerns about the quality of the preoperational environmental monitoring program, including data, sample collection procedures, laboratory analysis, data review and interpretation and duration of monitoring caused a significant delay in completing the licensing review.

  18. Technical Entrepreneurship and Technological Progress in Developing Countries.

    ERIC Educational Resources Information Center

    Quevedo-Procel, Jose

    This paper describes the Mexican economic environment in terms of general economic conditions from the 1940s to the present, the role of science and technology in industrial progress, and the promotion and support of small companies. The technical entrepreneur is identified as the missing link that would play an important part in the technological…

  19. Assessment Program Technical Progress Report, 1996-1997.

    ERIC Educational Resources Information Center

    McCown, Laurie; Fanning, Erin; Eickmeyer, Barbara

    Coconino Community College (CCC) annually assesses its institutional effectiveness to demonstrate its commitment to improving programs and services to students. The 1996-97 Assessment Program Technical Progress Report records the assessment and institutional activities enacted during the academic year, detailing the assessment model, timelines,…

  20. Investigating Some Technical Issues on Cohesive Zone Modeling of Fracture

    NASA Technical Reports Server (NTRS)

    Wang, John T.

    2011-01-01

    This study investigates some technical issues related to the use of cohesive zone models (CZMs) in modeling fracture processes. These issues include: why cohesive laws of different shapes can produce similar fracture predictions; under what conditions CZM predictions have a high degree of agreement with linear elastic fracture mechanics (LEFM) analysis results; when the shape of cohesive laws becomes important in the fracture predictions; and why the opening profile along the cohesive zone length needs to be accurately predicted. Two cohesive models were used in this study to address these technical issues. They are the linear softening cohesive model and the Dugdale perfectly plastic cohesive model. Each cohesive model constitutes five cohesive laws of different maximum tractions. All cohesive laws have the same cohesive work rate (CWR) which is defined by the area under the traction-separation curve. The effects of the maximum traction on the cohesive zone length and the critical remote applied stress are investigated for both models. For a CZM to predict a fracture load similar to that obtained by an LEFM analysis, the cohesive zone length needs to be much smaller than the crack length, which reflects the small scale yielding condition requirement for LEFM analysis to be valid. For large-scale cohesive zone cases, the predicted critical remote applied stresses depend on the shape of cohesive models used and can significantly deviate from LEFM results. Furthermore, this study also reveals the importance of accurately predicting the cohesive zone profile in determining the critical remote applied load.

  1. Dryland ecohydrology and climate change: critical issues and technical advances

    NASA Astrophysics Data System (ADS)

    Wang, L.; D'Odorico, P.; Evans, J. P.; Eldridge, D. J.; McCabe, M. F.; Caylor, K. K.; King, E. G.

    2012-08-01

    Drylands cover about 40% of the terrestrial land surface and account for approximately 40% of global net primary productivity. Water is fundamental to the biophysical processes that sustain ecosystem function and food production, particularly in drylands where a tight coupling exists between ecosystem productivity, surface energy balance, biogeochemical cycles, and water resource availability. Currently, drylands support at least 2 billion people and comprise both natural and managed ecosystems. In this synthesis, we identify some current critical issues in the understanding of dryland systems and discuss how arid and semiarid environments are responding to the changes in climate and land use. The issues range from societal aspects such as rapid population growth, the resulting food and water security, and development issues, to natural aspects such as ecohydrological consequences of bush encroachment and the causes of desertification. To improve current understanding and inform upon the needed research efforts to address these critical issues, we identify some recent technical advances in terms of monitoring dryland water dynamics, water budget and vegetation water use, with a focus on the use of stable isotopes and remote sensing. These technological advances provide new tools that assist in addressing critical issues in dryland ecohydrology under climate change.

  2. MHD Integrated Topping Cycle Project. Eighteenth quarterly technical progress report, November 1, 1991--January 31, 1992

    SciTech Connect

    Not Available

    1992-07-01

    This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

  3. Swallowable Wireless Capsule Endoscopy: Progress and Technical Challenges

    PubMed Central

    Pan, Guobing; Wang, Litong

    2012-01-01

    Wireless capsule endoscopy (WCE) offers a feasible noninvasive way to detect the whole gastrointestinal (GI) tract and revolutionizes the diagnosis technology. However, compared with wired endoscopies, the limited working time, the low frame rate, and the low image resolution limit the wider application. The progress of this new technology is reviewed in this paper, and the evolution tendencies are analyzed to be high image resolution, high frame rate, and long working time. Unfortunately, the power supply of capsule endoscope (CE) is the bottleneck. Wireless power transmission (WPT) is the promising solution to this problem, but is also the technical challenge. Active CE is another tendency and will be the next geneion of the WCE. Nevertheless, it will not come true shortly, unless the practical locomotion mechanism of the active CE in GI tract is achieved. The locomotion mechanism is the other technical challenge, besides the challenge of WPT. The progress about the WPT and the active capsule technology is reviewed. PMID:22253621

  4. EDITORIAL: 'Key issues' articles in Reports on Progress in Physics

    NASA Astrophysics Data System (ADS)

    Greene, Laura H.

    2007-03-01

    The Editorial Board of Reports on Progress in Physics has commissioned a series of short articles from world leaders on key physics issues in their field. These essays may raise the key issues, or ask open questions or may even suggest wild ideas. Basically, they give world leading physicists the opportunity to write what they think about the key issues in their field, free from the usual requirement to provide the fair and balanced presentations of the subject normally found in articles in Reports on Progress in Physics. We believe that the readers of the journal will be interested to learn about these exciting ideas. Just as Hilbert's famous paper of 1900 set the agenda for the next century or more in mathematics, so we hope that this series of papers will define the key issues and open questions in physics for the 21st Century and that the articles will be widely cited and downloaded. The first of these articles—'Insights from simulations of star formation' by Richard B Larson (Yale University, USA)—is published in the current issue. We trust that readers will find this article and its successors in the series to appear through 2007 and beyond entertaining and stimulating.

  5. Dryland ecohydrology and climate change: critical issues and technical advances

    NASA Astrophysics Data System (ADS)

    Wang, L.; D'Odorico, P.; Evans, J. P.; Eldridge, D.; McCabe, M. F.; Caylor, K. K.; King, E. G.

    2012-04-01

    Drylands cover about 40% of the terrestrial land surface and account for approximately 40% of global net primary productivity. Water is fundamental to the biophysical processes that sustain ecosystem function and food production, particularly in drylands, where a tight coupling exists between water resource availability and ecosystem productivity, surface energy balance, and biogeochemical cycles. Currently, drylands support at least 2 billion people and comprise both natural and managed ecosystems. In this synthesis, we identify some current critical issues in the understanding of dryland systems and discuss how arid and semiarid environments are responding to the changes in climate and land use. Specifically, we focus on dryland agriculture and food security, dryland population growth, desertification, shrub encroachment and dryland development issues as factors of change requiring increased understanding and management. We also review recent technical advances in the quantitative assessment of human versus climate change related drivers of desertification, evapotranspiration partitioning using field deployable stable water isotope systems and the remote sensing of key ecohydrological processes. These technological advances provide new tools that assist in addressing major critical issues in dryland ecohydrology under climate change

  6. Progress and issues in polycrystalline thin-film PV technologies

    SciTech Connect

    Zweibel, K.; Ullal, H.S.; Roedern, B. von

    1996-05-01

    Substantial progress has occurred in polycrystalline thin-film photovoltaic technologies in the past 18 months. However, the transition to first-time manufacturing is still under way, and technical problems continue. This paper focuses on the promise and the problems of the copper indium diselenide and cadmium telluride technologies, with an emphasis on continued R&D needs for the near-term transition to manufacturing and for next-generation improvements. In addition, it highlights the joint R&D efforts being performed in the U.S. Department of Energy/National Renewable Energy Laboratory Thin-Film Photovoltaic Partnership Program.

  7. Main Vacuum Technical Issues of Evacuated Tube Transportation

    NASA Astrophysics Data System (ADS)

    Zhang, Y. P.; Li, S. S.; Wang, M. X.

    In the future, Evacuated Tube Transportation (ETT) would be built and faster than jets. ETT tube with diameter 2∼4m and length over 1000 km will be the largest scale vacuum equipment on earth. This paper listed some main vacuum technical issues to be solved in ETT as follow. How to build ultra-large-scale vacuum chamber like ETT tube with low cost and high reliability? How to pump gas out off the ETT tube in short time? How to release heat or reduce temperature in the vacuum tube? Hot to avoid vacuum electricity discharge? How to manufacture vehicles with airproof shells and equip the life support system? How to detect leakage and find leakage position efficiently and fast as possible? Some relative solutions and suggestions are put up.

  8. Advanced coal-fueled gas turbine systems, Volume 1: Annual technical progress report

    SciTech Connect

    Not Available

    1988-07-01

    This is the first annual technical progress report for The Advanced Coal-Fueled Gas Turbine Systems Program. Two semi-annual technical progress reports were previously issued. This program was initially by the Department of Energy as an R D effort to establish the technology base for the commercial application of direct coal-fired gas turbines. The combustion system under consideration incorporates a modular three-stage slagging combustor concept. Fuel-rich conditions inhibit NO/sub x/ formation from fuel nitrogen in the first stage; coal ash and sulfur is subsequently removed from the combustion gases by an impact separator in the second stage. Final oxidation of the fuel-rich gases and dilution to achieve the desired turbine inlet conditions are accomplished in the third stage. 27 figs., 15 tabs.

  9. Extending systems ergonomics thinking to accommodate the socio-technical issues of Systems of Systems.

    PubMed

    Siemieniuch, C E; Sinclair, M A

    2014-01-01

    Socio-technical issues for Systems of Systems (SoS) differ in several ways from those for systems, mainly because the individual systems that are components of the SoS are usually owned by different organisations, each responsible for the optimisation and operation of its own system. Consequently, management of the SoS is about negotiation and management of the interfaces. Because of issues of Intellectual Property Rights (IPRs), commercial confidence, and the like, there is seldom sufficient, timely information in circulation about the SoS. Surprises are endemic to SoS, and resilience is a fundamental requirement. This paper outlines the different characteristics of SoS compared to ordinary systems, discusses many of the socio-technical issues involved, and then outlines a generic approach to these issues, treating the SoS as a 'wicked problem'. Endemic to this is the need for governance, which is discussed briefly. This is followed by a description of the evident gaps in knowledge about the functioning of SoS, and a listing of tool classes, the development of which would enable progress to be made more effectively. Finally, the paper discusses how the SoS approach might be the best way to entrain ICT to address global drivers, thus pointing to the importance of the SoS approach. PMID:24011651

  10. 7 CFR 1486.207 - What is the Technical Issues Resolution Fund?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false What is the Technical Issues Resolution Fund? 1486... PROGRAM Eligibility, Applications, and Funding § 1486.207 What is the Technical Issues Resolution Fund? (a) This fund was established to address technical barriers to trade in emerging markets worldwide...

  11. 7 CFR 1486.207 - What is the Technical Issues Resolution Fund?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false What is the Technical Issues Resolution Fund? 1486... PROGRAM Eligibility, Applications, and Funding § 1486.207 What is the Technical Issues Resolution Fund? (a) This fund was established to address technical barriers to trade in emerging markets worldwide...

  12. Solar thermal power systems. Annual technical progress report, FY 1979

    SciTech Connect

    Braun, Gerald W.

    1980-06-01

    The Solar Thermal Power Systems Program is the key element in the national effort to establish solar thermal conversion technologies within the major sectors of the national energy market. It provides for the development of concentrating mirror/lens heat collection and conversion technologies for both central and dispersed receiver applications to produce electricity, provide heat at its point of use in industrial processes, provide heat and electricity in combination for industrial, commercial, and residential needs, and ultimately, drive processes for production of liquid and gaseous fuels. This report is the second Annual Technical Progress Report for the Solar Thermal Power Systems Program and is structured according to the organization of the Solar Thermal Power Systems Program on September 30, 1979. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the Solar Thermal Power Systems Program, a brief history, the significant achievements and real progress during FY 1979, also future project activities as well as anticipated significant achievements are forecast. (WHK)

  13. Environmental Research Division technical progress report, January 1984-December 1985

    SciTech Connect

    Not Available

    1986-05-01

    Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter.

  14. Vocational technical and adult education: Status, trends and issues related to electronic delivery

    NASA Technical Reports Server (NTRS)

    Rothenberg, D.

    1973-01-01

    Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

  15. Quarterly technical progress report, February 1, 1996--April 30, 1996

    SciTech Connect

    1996-05-28

    This report from the Amarillo National REsource Center for PLutonium provides research highlights and provides information regarding the public dissemination of information. The center is a a scientific resource for information regarding the issues of the storage, disposition, potential utilization and transport of plutonium, high explosives, and other hazardous materials generated from nuclear weapons dismantlement. The center responds to informational needs and interpretation of technical and scientific data raised by interested parties and advisory groups. Also, research efforts are carried out on remedial action programs and biological/agricultural studies.

  16. Verification of Steelmaking Slags Iron Content Final Technical Progress Report

    SciTech Connect

    J.Y. Hwang

    2006-10-04

    The steel industry in the United States generates about 30 million tons of by-products each year, including 6 million tons of desulfurization and BOF/BOP slag. The recycling of BF (blast furnace) slag has made significant progress in past years with much of the material being utilized as construction aggregate and in cementitious applications. However, the recycling of desulfurization and BOF/BOP slags still faces many technical, economic, and environmental challenges. Previous efforts have focused on in-plant recycling of the by-products, achieving only limited success. As a result, large amounts of by-products of various qualities have been stockpiled at steel mills or disposed into landfills. After more than 50 years of stockpiling and landfilling, available mill site space has diminished and environmental constraints have increased. The prospect of conventionally landfilling of the material is a high cost option, a waste of true national resources, and an eternal material liability issue. The research effort has demonstrated that major inroads have been made in establishing the viability of recycling and reuse of the steelmaking slags. The research identified key components in the slags, developed technologies to separate the iron units and produce marketable products from the separation processes. Three products are generated from the technology developed in this research, including a high grade iron product containing about 90%Fe, a medium grade iron product containing about 60% Fe, and a low grade iron product containing less than 10% Fe. The high grade iron product contains primarily metallic iron and can be marketed as a replacement of pig iron or DRI (Direct Reduced Iron) for steel mills. The medium grade iron product contains both iron oxide and metallic iron and can be utilized as a substitute for the iron ore in the blast furnace. The low grade iron product is rich in calcium, magnesium and iron oxides and silicates. It has a sufficient lime value and

  17. OTEC support services. Quarterly technical progress report No. 11, 15 November 1980-14 February 1981

    SciTech Connect

    1981-02-01

    Technical engineering and management support services for the Ocean Thermal Energy Conversion Program are listed along with their objectives. Progress is reported on the following: technical assessments, OTEC system integration, environment and siting considerations, and transmission subsystem considerations. (MHR)

  18. Report on TRP Analyses of Issues Concerning Within-Age versus Cross-Age Scales for the National Assessment of Educational Progress.

    ERIC Educational Resources Information Center

    Haertel, Edward H.

    The National Assessment Governing Board of Educational Progress has recently adopted the position that the National Assessment of Educational Progress (NAEP) should employ within-age scaling whenever feasible. The NAEP Technical Review panel (TRP) has studied the issue at some length, and reports on it in this analysis. The first section reviews…

  19. Thermal energy storage technical progress report, April 1992--March 1993

    SciTech Connect

    Olszewski, M.

    1993-05-01

    The Department of Energy (DOE) is supporting development of thermal energy storage (TES) as a means of efficiently coupling energy supplies to variable heating or cooling demands. Uses of TES include electrical demand-side management in buildings and industry, extending the utilization of renewable energy resources such as solar, and recovery of waste heat from periodic industrial processes. Technical progress to develop TES for specific diurnal and industrial applications under the Oak Ridge National Laboratory`s TES program from April 1992 to March 1993 is reported and covers research in the areas of low temperature sorption, thermal energy storage water heater, latent heat storage wallboard and latent/sensible heat regenerator technology development.

  20. Compact DEMO, SlimCS: design progress and issues

    NASA Astrophysics Data System (ADS)

    Tobita, K.; Nishio, S.; Enoeda, M.; Kawashima, H.; Kurita, G.; Tanigawa, H.; Nakamura, H.; Honda, M.; Saito, A.; Sato, S.; Hayashi, T.; Asakura, N.; Sakurai, S.; Nishitani, T.; Ozeki, T.; Ando, M.; Ezato, K.; Hamamatsu, K.; Hirose, T.; Hoshino, T.; Ide, S.; Inoue, T.; Isono, T.; Liu, C.; Kakudate, S.; Kawamura, Y.; Mori, S.; Nakamichi, M.; Nishi, H.; Nozawa, T.; Ochiai, K.; Ogiwara, H.; Oyama, N.; Sakamoto, K.; Sakamoto, Y.; Seki, Y.; Shibama, Y.; Shimizu, K.; Suzuki, S.; Takahashi, K.; Tanigawa, H.; Tsuru, D.; Yamanishi, T.; Yoshida, T.

    2009-07-01

    The design progress in a compact low aspect ratio (low A) DEMO reactor, 'SlimCS', and its design issues are reported. The design study focused mainly on the torus configuration including the blanket, divertor, materials and maintenance scheme. For continuity with the Japanese ITER-TBM, the blanket is based on a water-cooled solid breeder blanket. For vertical stability of the elongated plasma and high beta access, the blanket is segmented into replaceable and permanent blankets and a sector-wide conducting shell is arranged inbetween these blankets. A numerical calculation indicates that fuel self-sufficiency can be satisfied when the blanket interior is ideally fabricated. An allowable heat load to the divertor plate should be 8 MW m-2 or lower, which can be a critical constraint for determining a handling power of DEMO.

  1. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area. Volume 3, Application of technical issues to the TRU-contaminated pits and trenches

    SciTech Connect

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Krisman, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-07-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the acid pit and transuranic pits and trenches (TRU-PTs) at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues lated with ISV application at the SDA. The activities of the ISV Steering Committee are summarized in a three-volume report. Volume I identifies the systematic approach used to identify and prioritize the ISV technical issues and briefly discusses the methodology that will be employed to resolve these issues. Volumes 2 and 3 discuss each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTS, respectively. The three-volume report is a working document that will be updated as necessary to reflect current evaluation strategy for the ISV technology. This is Volume 3.

  2. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area. Volume 2, Application of technical issues to the Acid Pit

    SciTech Connect

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Gratson, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-01-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the Acid Pit and Transuranic Pits and Trenches (TRU-PTs) that are present at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues exist that must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues associated with ISV application at the INEL SDA. The activities of the ISV Steering Committee are summarized in three volumes of this report. Volume 1 identifies the systematic approach used to identify and prioritize the ISV technical issues, and briefly discusses the methodology that will be employed to resolve these issues. This document Volume 2 and Volume 3 discusses each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTs, respectively.

  3. Advanced Cooling Technology, Inc. quarterly technical progress report

    SciTech Connect

    Myers, H.S.

    1992-07-29

    Advanced Cooling Technology (ACT), Inc., will perform the following tasks in order to develop an improved, more reliable and more marketable version of their ACT Evaporative Subcooling System: (1) Develop a more stable pump by reducing vibration levels; (2) Design and develop a drainage mechanism that will protect the coil; (3) Apply for Underwriters laboratories approval and perform follow-up and coordination work to complete task to insure product is safe, within its intended applications; (4) Test invention's performance to demonstrate energy savings and long term resistance to scale and corrosion; (5) Contract with the American Refrigeration Institute to perform engineering tests under controlled laboratory conditions; (6) Organize data, and develop technical manual for helping purchasers determining energy savings and inventions merits, and (7) Perform a field test in a cooperative supermarket, where utility usage can be measured on a before and after basis. Tasks 1,2 are completed; task 3 was abandoned for reasons explained in the last quarterly progress report. Progress on tasks 4 and 5 is reported in this paper. (GHH)

  4. Advanced Cooling Technology, Inc. quarterly technical progress report

    SciTech Connect

    Myers, H.S.

    1992-07-29

    Advanced Cooling Technology (ACT), Inc., will perform the following tasks in order to develop an improved, more reliable and more marketable version of their ACT Evaporative Subcooling System: (1) Develop a more stable pump by reducing vibration levels; (2) Design and develop a drainage mechanism that will protect the coil; (3) Apply for Underwriters laboratories approval and perform follow-up and coordination work to complete task to insure product is safe, within its intended applications; (4) Test invention`s performance to demonstrate energy savings and long term resistance to scale and corrosion; (5) Contract with the American Refrigeration Institute to perform engineering tests under controlled laboratory conditions; (6) Organize data, and develop technical manual for helping purchasers determining energy savings and inventions merits, and (7) Perform a field test in a cooperative supermarket, where utility usage can be measured on a before and after basis. Tasks 1,2 are completed; task 3 was abandoned for reasons explained in the last quarterly progress report. Progress on tasks 4 and 5 is reported in this paper. (GHH)

  5. FY 1992 work plan and technical progress reports

    SciTech Connect

    1992-11-01

    The Desert Research Institute (DRI) is a division of the University of Nevada System devoted to multidisciplinary scientific research. For more than 25 years, DRI has conducted research for the US Department of Energy`s Nevada Field Office (DOE/NV) in support of operations at the Nevada Test Site (NTS). During that time, the research program has grown from an early focus on hydrologic studies to include the areas of geology, archaeology, environmental compliance and monitoring, statistics, database management, public education, and community relations. The range of DRI`s activities has also expanded to include a considerable amount of management and administrative support in addition to scientific investigations. DRI`s work plan for FY 1992 reflects a changing emphasis in DOE/NV activities from nuclear weapons testing to environmental restoration and monitoring. Most of the environmental projects from FY 1991 are continuing, and several new projects have been added to the Environmental Compliance Program. The Office of Technology Development Program, created during FY 1991, also includes a number of environmental projects. This document contains the FY 1992 work plan and quarterly technical progress reports for each DRI project.

  6. Inventors Center of Michigan Technical Assessment Program. Final progress report

    SciTech Connect

    Not Available

    1992-12-31

    The Technical Assessment Program at the Inventors Center of Michigan is designed to provide independent inventors with a reliable assessment of the technical merits of their proposed inventions. Using faculty from within Ferris State University`s College of Technology an assessment process examines the inventor`s assumptions, documentation, and prototypes, as well as, reviewing patent search results and technical literature to provide the inventor with a written report on the technical aspects of the proposed invention. The forms for applying for a technical assessment of an invention are included.

  7. Technical design issues for a field-portable supercritical fluid extractor

    SciTech Connect

    Wright, B.W.; Zemanian, T.S.; Robins, W.H.; Wright, C.W.

    1995-01-01

    Supercritical fluid extraction is gaining acceptance as an alternative sample preparation method for trace organic analysis. The development of SFE instrumentation optimized for field use requires taking several technical design issues including size and weight requirements, user-friendly operation, and technical performance capabilities into consideration. Parameters associated with a prototype SFE instrument under development for potential use in conducting on-site inspections of the Chemical Weapons Convention and its preliminary technical and operational performance are described.

  8. 75 FR 74713 - Reliability Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-01

    ... file written comments that relate to the issues discussed during the technical conference.\\1\\ Comments..., 75 FR 70,752 (November 18, 2010). Kimberly D. Bose, Secretary. BILLING CODE 6717-01-P ... Allowing Post-Technical Conference Comments November 23, 2010. On November 18, 2010, the Federal...

  9. LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

    EPA Science Inventory

    The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

  10. Non-intubated anesthesia in thoracic surgery—technical issues

    PubMed Central

    2015-01-01

    Performing awake thoracic surgery (ATS) is technically more challenging than thoracic surgery under general anesthesia (GA), but it can result in a greater benefit for the patient. Local wound infiltration and lidocaine administration in the pleural space can be considered for ATS. More invasive techniques are local wound infiltration with wound catheter insertion, thoracic wall blocks, selective intercostal nerve blockade, thoracic paravertebral blockade and thoracic epidural analgesia, offering the advantage of a catheter placement which can also be continued for postoperative analgesia. PMID:26046050

  11. Technical Issues in the Assessment of Affective Characteristics.

    ERIC Educational Resources Information Center

    Dockrell, W. B.

    With the advent of profiling and maintaining records of achievement, the assessment of the affective characteristics of pupils has become an issue of general concern in England. The Scottish Council for Research in Education has been involved in programs investigating the assessment of individuals and the evaluation of curricula. Teachers can…

  12. Human Factors Technologies: Past Promises, Future Issues. Final Technical Paper.

    ERIC Educational Resources Information Center

    Alluisi, Earl A.

    This discussion of the major issues confronting the human factors profession begins by pointing out that the concepts of systems and system design are central to the roles and functions of the human factors specialist. Three related disciplines--human factors engineering, ergonomics, and human skilled performance--are briefly described, and the…

  13. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, July 1--September 30, 1992

    SciTech Connect

    Brandes, S.D.; Winschel, R.A.; Burke, F.P.

    1992-11-01

    This is the twelfth Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Major topics reported are: Summaries of the final reports produced by Lehigh University, West Virginia University, and Vander Sande Associates under the Participants Program are presented. Analytical data produced by CONSOL are provided in Appendix I for all samples employed in the Participants Program and issued with the samples to research groups in the Participants Program. A paper was presented at the 1992 US Department of Energy Pittsburgh Energy Technology Center Liquefaction Contractors` Review Conference, held in Pittsburgh September 23--24, 1992, entitled ``The Chemical Nature of Coal Liquid Resids and the Implications for Process Development``. It appears as Appendix 2 in this report.

  14. PFBC HGCU Test Facility. Fourth quarterly technical progress report, CY 1991

    SciTech Connect

    Not Available

    1992-01-01

    This is the ninth technical progress report submitted to the Department of Energy in connection with the Cooperative Agreement between DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the period of work completed during the Fourth Quarter of CY 1991. During the reporting period, work focused on completing Task 2, Hot Gas Clean Up (HGCU) Detailed Design and Task 4, Procurement Activities to support the installation of the Westinghouse advanced particle filter (APE). The following significant events occurred during this report period: The mechanical/structural contractor (Pullman Power Products) mobilized at the Tidd site in December and began erecting steel framing for the APF. A contract modification was issued to Babcock & Wilcox Co. for the supply of piping materials required for the combustor internal modifications. A contract was awarded to ANARAD, Inc. for a gas analysis system. A contract was prepared and is being processed for electrical erection.

  15. Power systems development facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

    SciTech Connect

    Not Available

    1994-07-01

    This quarterly technical progress report summarizes work completed during the last quarter of the Second Budget Period, January 1 through March 31, 1994, entitled {open_quotes}Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.{close_quotes} The objective of this project is to evaluate hot gas particulate control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  16. Technical issues in dynamics and control of large space structures

    NASA Technical Reports Server (NTRS)

    Card, M. F.; Anderson, W. W.

    1983-01-01

    Examples of large space systems currently being considered by NASA include a large communications antenna system (the Land Mobile Satellite System), a precision antenna system (the Large Deployable Reflector System), and a preliminary concept for NASA's space station. Each system has low natural vibration frequencies, stringent pointing requirements, and, for the antennas, demanding surface accuracy requirements. A review is provided of the progress being made in structural ground tests with respect to surface accuracy, deployment, and erection of large structures. Attention is given to the dynamic loads on large space structures, on-orbit testing, space vibration control devices, and the characteristics of distributed control.

  17. Investigating Technical and Pedagogical Usability Issues of Collaborative Learning with Wikis

    ERIC Educational Resources Information Center

    Hadjerrouit, Said

    2012-01-01

    Wikis have been recently promoted as tools that foster collaborative learning. However, there has been little research devoted to the criteria that are suitable to address issues pertinent to collaborative learning. This paper proposes a set of criteria to explore technical and pedagogical usability issues of collaborative learning with wikis. The…

  18. 75 FR 68780 - Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-09

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference November 2, 2010. The Federal Energy Regulatory Commission (Commission) issued a notice on October 1, 2010 that it will...

  19. Technical Issues Map for the NHI System Interface and Support Systems Area: 1st Quarter FY 07

    SciTech Connect

    Steven R. Sherman

    2006-12-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway. The technical issues are ranked according to priority and by assumed resolution dates. Due to funding limitations, not all high-priority technical issues are under study at the present time, and more resources will need to be dedicated to tackling such issues in the future. This technical issues map is useful for understanding the relative importance of various technical challenges and will be used as a planning tool for future work package planning.

  20. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area

    SciTech Connect

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Krisman, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-07-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the acid pit and transuranic pits and trenches (TRU-PTs) at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues lated with ISV application at the SDA. The activities of the ISV Steering Committee are summarized in a three-volume report. Volume I identifies the systematic approach used to identify and prioritize the ISV technical issues and briefly discusses the methodology that will be employed to resolve these issues. Volumes 2 and 3 discuss each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTS, respectively. The three-volume report is a working document that will be updated as necessary to reflect current evaluation strategy for the ISV technology. This is Volume 3.

  1. Technical issues associated with in situ vitrification of the INEL Subsurface Disposal Area

    SciTech Connect

    Stoots, C.M.; Bates, S.O.; Callow, R.A.; Campbell, K.A.; Farnsworth, R.K.; Gratson, G.K.; McKellar, M.G.; Nickelson, D.F.; Slater, C.E.

    1992-01-01

    In situ vitrification (ISV) has been identified as an alternative technology for remediation of the Acid Pit and Transuranic Pits and Trenches (TRU-PTs) that are present at the Idaho National Engineering Laboratory (INEL) Subsurface Disposal Area (SDA). However, a number of technical issues exist that must be resolved before ISV can be considered applicable to these waste sites. To assist in the ISV technology evaluation, an ISV Steering Committee was formed to identify, prioritize, and develop closure roadmaps for technical issues associated with ISV application at the INEL SDA. The activities of the ISV Steering Committee are summarized in three volumes of this report. Volume 1 identifies the systematic approach used to identify and prioritize the ISV technical issues, and briefly discusses the methodology that will be employed to resolve these issues. This document Volume 2 and Volume 3 discusses each technical issue in greater detail and suggest specific closure roadmaps to be used in resolving technical issues associated with ISV at the SDA Acid Pit and TRU-PTs, respectively.

  2. Professional technical support services for the Mining Equipment Test Facility. First quarterly technical progress report, April 14-June 30, 1981

    SciTech Connect

    Garson, R.C.

    1981-07-01

    The Department of Energy recently began the operation of its Mining Equipment Test Facility. One component at that facility is the highly sophisticated Mine Roof Simulator (MRS) for research and development of roof support equipment. Because of its previous experience, the University of Pittsburgh was contracted to assist the Facilities Manager by providing professional technical support services, principally for the MRS. This technical progress report briefly describes the services provided during the reporting period and planned for the next period. No significant technical disclosures of interest to those not associated with the MRS are contained herein.

  3. Professional technical support services for the Mining Equipment Test Facility. Fourth quarterly technical progress report, 1 January-31 March 1982

    SciTech Connect

    Garson, R.C.

    1982-04-01

    The Department of Energy recently began the operation of its Mining Equipment Test Facility. One component at that facility is the highly sophisticated Mine Roof Simulator (MRS) for research and development of roof support equipment. Because of its previous experience, the University of Pittsburgh was contracted to assist the Facilities Manager by providing professional technical support services, principally for the MRS. This technical progress report briefly describes the services provided during the reporting period and planned for the next period. No significant technical disclosures of interest to those not associated with the MRS are contained herein.

  4. Issues Management: End of First Decade Progress Report.

    ERIC Educational Resources Information Center

    Heath, Robert L.; Cousino, Kenneth R.

    1990-01-01

    Argues that issues management is a robust contribution to the public relations discipline. Offers additional rationale for empowering public relations practitioners by involving them in strategic planning, making them responsible for issue scanning and monitoring, integrating their advice into standards of corporate social responsibility, and…

  5. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

    SciTech Connect

    Ulm, Franz-Josef

    2000-03-31

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

  6. Key emerging issues in progressive supranuclear palsy and corticobasal degeneration.

    PubMed

    Josephs, Keith A

    2015-03-01

    It has been approximately 50 years since neurologists were introduced to the entities, "progressive supranuclear palsy" and "corticobasal degeneration". Since the two seminal publications, there have been significant advancements in our understanding of these two neurodegenerative diseases, particularly the fact that both are associated with tau. Recent advances over the past 3 years that are notable to the field are discussed in this review that covers clinical diagnosis, pathological features, neuroimaging and CSF biomarkers, genetic associations and clinical trials related to progressive supranuclear palsy and corticobasal degeneration. PMID:25701010

  7. Space Power MHD (magnetohydrodynamic) System: Third quarterly technical progress report, 1 November 1987-31 January 1988

    SciTech Connect

    Not Available

    1988-03-15

    This progress report of the Space Power MHD System project presents the accomplishments during 1 November 1987 through 31 January 1988. The scope of work covered encompasses the definition of an MHD power system conceptual design and development plan (Task 1). Progress included the following: Subcontracts were issued to the MIT Plasma Fusion Center and the Westinghouse R and D Center. The performance of the 100 MW 500 sec. power system was optimized and the design concept finalized, including mass and energy balances. Mass and cost estimates were prepared. A design review was held at DOE/PETC. This also included the review of the technical issues definition and of the R and D Plan. Following the review, a final iteration on the conceptual design was initiated. Formulation of the R and D Plan was continued. Preparation of the Task 1 R and D Report was initiated. 12 figs.

  8. First Progress Report of the Vocational-Technical Education Consortium of States.

    ERIC Educational Resources Information Center

    Hirst, Ben A., Jr.; Netrick, LeRoy M.

    This first progress report of the Vocational-Technical Education Consortium of States (V-TECS) covers the progress of the V-TECS through its first seven months of operation and is designed to provide information to member States, prospective members, and interested agencies, organizations, and foundations. (The fundamental purpose of V-TECS is to…

  9. Quarterly technical progress report, April-June 1980

    SciTech Connect

    Not Available

    1980-01-01

    Progress and activities are reported on the following four lines of assurance (LOA-1 through 4): prevent accidents, limit core damage, maintain containment integrity, and attenuate radiological consequences. (DLC)

  10. Containment-emergency-sump performance. Technical findings related to Unresolved Safety Issue A-43. [PWR

    SciTech Connect

    Not Available

    1983-04-01

    This report summarizes key technical findings related to the Unresolved Safety Issue A-43, Containment Emergency Sump Performance, and provides recommendations for resolution of attendant safety issues. The key safety questions relate to: (a) effects of insulation debris on sump performance; (b) sump hydraulic performance as determined by design features, submergence, and plant induced effects, and (c) recirculation pump performance wherein air and/or particulate ingestion can occur. The technical findings presented in this report provide information relevant to the design and performance evaluation of the containment emergency sump.

  11. The Learning Disabilities/Lack of Progress Issue.

    ERIC Educational Resources Information Center

    Connections: A Journal of Adult Literacy, 1995

    1995-01-01

    This issue focuses on learning disabilities of adult literacy students. The 11 papers in the journal were developed from research done by the authors at an intensive summer institute in 1994. After an introduction and a description of the summer institute (Martha Merson), the following papers are included: "Lucie: Is She or Isn't She?" (Meryl…

  12. PFBC HGCU Test Facility. Second quarterly technical progress report, CY 1992

    SciTech Connect

    Not Available

    1992-07-01

    This is the eleventh technical progress report submitted to the Department of Energy (DOE) in connection with the Cooperative Agreement between DOE and Ohio Power company for the Tidd Pressurized Fluidized Bed Combustion (PFBC) Hot Gas Clean Up Test Facility. This report covers the period of work completed during the Second Quarter of CY 1992. Activities included: The Tidd combustor internals were modified to connect the hot gas system for slipstream operation; Various pre-operational activities were completed, including pneumatic leak testing of the HGCU system, operation of the closed cycle cooling water system, operation of the back pulse compressor and air preheater, and checkout of the back pulse skid. Initial operation of the system using the bypass cyclone occurred during May 21--23, 1992; On May 23, 1992, an expansion joint ruptured, forcing the unit to be shut down. The failure was later determined to be due to stress corrosion. Following the expansion joint failure, a complete engineering review of the system was undertaken and is continuing; Contract Modification No. 6 was issued to Westinghouse during this quarter. This modification is for APF surveillance testing services; A purchase order was issued to Battelle for ash sampling hardware and testing services.

  13. Technical Issues and Characterization for Fuel and Sludge in Hanford K Basins

    SciTech Connect

    MAKENAS, B.J.

    2000-06-01

    Technical Issues for the interim dry storage of N Reactor Spent Nuclear Fuel (SNF) are discussed. Characterization data from fuel, to support resolution of these issues, are reviewed and new results for the oxidation of fuel in a moist atmosphere and the drying of whole fuel elements are presented. Characterization of associated K basin sludge is also discussed in light of a newly adopted disposal pathway.

  14. LANL technical progress update for US HJPRR working group

    SciTech Connect

    Dombrowski, David E

    2011-01-06

    The outline of this presentation is: (1) Collaboration on Master Alloy Melting; (2) Data for Safety Analysis, (3) HIP can development status, (4) Bond strength quality, (5) Plasma spraying results, and (6) Bare Rolling Larger Rolling Ingots. Significant near term progress has been made in five areas: (1) Collaboration on Master Alloy Melting; (2) HIP can development status; (3) Bond strength quality; (4) Plasma spraying results; and (5) Bare Rolling Larger Rolling Ingots. Significant progress is expected in the next month on several important areas: (1) Intrinsic bond strength of plasma sprayed Zr (2) Advanced Cleaning; (3) Residual Stress Collaboration with INL; and (4) Cost Metric Assessment.

  15. Extra focal convective suppressing solar collector. Final technical progress report

    SciTech Connect

    1996-05-01

    This progress report describes work done on the Extra Focal Convective Suppressing Solar Collector. The topics of the report include sensor refinement for the tracking electronics, tracking controller refinement, system optics evaluation, absorber system material evaluation and performance, tracking hardware evaluation and refinement, and full scale prototype construction and testing.

  16. Assessment Program Technical Progress Report, 1997-1998.

    ERIC Educational Resources Information Center

    Eickmeyer, Barbara; Hill, Stephen

    This Assessment Program Progress Report (APPR) records the institutional activities that have taken place at Coconino Community College (CCC) during the 1997-98 academic year. It presents models, timelines, accomplishments, and opportunities for improvement in the assessment practices at CCC. Implementation and outcomes information is included for…

  17. Single-electron charging effects. Technical progress report

    SciTech Connect

    Ruggiero, S.T.

    1991-12-15

    The status of our project on single-electron tunneling is, again, excellent. As outlined in our original proposal, a key goal for this project has been the development of a scanning tunneling instrument for the purpose of imaging individual particles and tunneling into these particles at high magnetic fields. Further progress is discussed in this report.

  18. Technical review of the SWELL product. Second quarterly progress report

    SciTech Connect

    Alexanian, G.

    1998-03-23

    This progress report describes design and marketing efforts made to reduce the cost of the product, and reassess its market potential in light of reduced manufacturing costs and modified design. Marketing has looked at applications in agriculture, the turf grass industry, and golf coarse applications. The new controller offers energy efficiency in control of valves and minimization of costs associated with hard wired systems.

  19. Particulate hot gas stream cleanup technical issues. Quarterly technical progress report, July 1995--September 1995

    SciTech Connect

    Pontius, D.H.

    1995-12-15

    This is the fourth quarterly report describing the activities performed under Contract No. DE-AC21-94MC31160. Task 1 of this contract concerns analyses of HGCU ashes and descriptions of filter performance that are designed to address the problems with filter operation linked to the characteristics of the collected ash. Task 2 of this contract includes characterization of new and used filter elements. Some of the problems observed at the Tidd and Karhula PFBC facilities include excessive filtering pressure drop, the formation of large, tenacious ash deposits within the filter vessel, and bent or broken candle filter elements. These problems have been attributed to ash characteristics, durability of the ceramic filter elements, and specific limitations of the filter design. In addition to these problems related to the characteristics of PFBC ashes, our laboratory characterizations of gasifier and carbonize ashes have shown that these ashes also have characteristics that might negatively affect filtration. Problems with the durability of the filter elements are being addressed by the development and evaluation of elements constructed from alternative ceramic materials.

  20. Honoring Progress: An Update on the NGA Center Honor States. Volume 1, Issue 3

    ERIC Educational Resources Information Center

    Hartney, Michael, Ed.

    2007-01-01

    This bimonthly newsletter provides information about the progress of the Honor States Grant Program, a governor-led effort to improve college- and work-ready graduation rates. This issue explores strategies that governors and state policymakers are using to define and assess college and work readiness, Progress of three states in assessment is…

  1. Progressive Education and Feminist Pedagogies: Issues in Gender, Power, and Authority.

    ERIC Educational Resources Information Center

    Maher, Frances A.

    1999-01-01

    Explores the relationship between feminist pedagogical theory and progressive education related to classroom gender relations and construction of female teacher authority, examining contemporary applications of progressive educational theory to gender issues, addressing teacher authority (noting Dewey's writings on women), and suggesting how…

  2. Environmental Research Division technical progress report: January 1986--October 1987

    SciTech Connect

    Not Available

    1988-07-01

    Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases.

  3. Technical progress report, 1 April-30 June 1981

    SciTech Connect

    1981-01-01

    This report describes the technical accomplishments during the quarter ending June 1981, on the commercial nuclear waste management programs under the direction of the Office of Nuclear Waste Isolation (ONWI). The ONWI program is organized into 8 tasks entitled: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. Principal investigators in each of these areas have submitted summaries of quarterly highlights for inclusion in this report. Separate abstracts have been prepared for 5 of these tasks for inclusion in the Energy Data Base. (DMC)

  4. First quarter technical progress report for Thermally Modified Sand

    SciTech Connect

    Gilfilian, R.E.

    1994-02-28

    This report documents progress on a project to demonstrate suitability of Thermally Modified Sand (TMS) for large scale use by demonstrating its performance on icy roadways maintained by the State of Alaska Department of Transportation. This report deals primarily with the startup of the project and includes initial observations of the effectiveness of the use of the TMS versus the typical salt/sand combination.

  5. Monthly technical progress report, January 1, 1996 - January 28, 1996

    SciTech Connect

    1996-02-24

    This is the January 1996 progress report contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities, Cassini RTG Program. Included are discussions on the status of: (1) spacecraft integration and support, (2) engineering support, (3) safety, (4) qualified unicouple production, (5) ETG fabrication, Assembly, and Test, (6) ground support equipment, (7) RTG shipping and launch support, (8) designs, reviews, and mission applications, (9) project management, and (10) CAGO acquisition.

  6. Fitness for duty in the nuclear industry: Update of the technical issues 1996

    SciTech Connect

    Durbin, N.; Grant, T.

    1996-05-01

    The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about which there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.

  7. The VLA Sky Survey (VLASS): Technical Implementation Plans and Progress

    NASA Astrophysics Data System (ADS)

    Myers, Steven T.; Law, Casey J.; Baum, Stefi Alison; Chandler, Claire J.; Chatterjee, Shami; Lacy, Mark; Murphy, Eric J.; VLASS Survey Science Group

    2016-01-01

    The VLA Sky Survey (VLASS) was initiated to exploit the science and technical opportunities for a new large radio astronomical survey using the Karl G. Jansky Very Large Array. In March 2015, the proposal for the VLASS underwent a formal Community Review. What emerged from this review is a 5400 hour project to survey the 33885 square degrees of the sky above Declination -40 degrees from 2-4 GHz at 2MHz frequency resolution and 2.5" angular resolution. Over the survey duration of 7 years, each area of the sky will be covered in 3 epochs spaced 32 months apart, to a depth of 0.12mJy/beam rms noise per epoch (0.07mJy/beam combined) in total intensity (Stokes I) and including full polarization. Observations are planned to commence in mid-2016. The raw data will be available in the NRAO archive immediately with no proprietary period and science data products will be provided to the community in a timely manner.In this presentation we describe the survey design and the Technical Implementation Plan (TIP) for the VLASS. The VLASS Basic Data Products (BDP) that will be produced by the survey team include: raw and calibrated visibility data, quick-look continuum images, single-epoch images and spectral image cubes, single-epoch basic object catalogs, and cumulative "static sky" images and image cubes and basic object catalogs to the full survey depth. Calibration, image processing, and analysis for the VLASS will be carried out through automated pipelines being developed at NRAO. Integral to this workflow is maintaining Quality Assurance throughout the system from telescope to archive. The storage and archive services budgeted for the BDP is 1PB for the data and images combined. Significantly higher storage would be required to serve the highest spectral resolution spectral cubes over the full sky area, and thus devising an affordable strategy for providing these services is critical, for example through "Processing on Demand" based on user query of the archive. We will

  8. Nuclear safety. Technical progress journal, October 1996--December 1996

    SciTech Connect

    1996-12-31

    The five papers in this issue address various issues associated with the behavior of high burnup fuels, especially under reactivity initiated accident (RIA) conditions. The mechanisms and parameters that have an effect on the fuel behavior are detailed, based on tests and analyses. The ultimate goal of the research reported is the development of new regulatory criteria for high burnup fuel under design basis accident conditions. Specific topics of the papers, which are abstracted individually in the database, are: (1) regulatory assessment of test data for RIAs, (2) high burnup fuel transient behavior under RIA conditions, (3) NSRR/RIA experiments with high burnup PWR fuels, (4) the Russian RIA research program, and (5) RIA simulation experiments on the intermediate and high burnup test rods. The papers are contributed from the United States, France, Japan, and Russia.

  9. Advanced thermally stable jet fuels. Technical progress report, 1995

    SciTech Connect

    Schobert, H.H.; Eser, S.; Song, C.

    1996-04-01

    The Penn State program in advanced thermally stable jet fuels has five components:(1) development of mechanisms of degradation and solids formation; (2) quantitative measurement of growth of sub- micrometer and micrometer sized particles suspended in fuels during thermal stressing; (3) characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) elucidation of the role of additives in retarding the formation of carbonaceous solids; and (5) assessment of the potential of producing high yields of cycloalkanes and hydroaromatics by direct liquefaction of coal. Progress reports for these tasks are presented.

  10. Quarterly technical progress report, April-June 1982

    SciTech Connect

    1984-04-01

    Progress reports are presented for the following tasks: (1) preparation of low-rank coals; application of liquefaction processes to low-rank coals; (2) slagging fixed-bed gasification; (3) atmospheric fluidized-bed combustion of low-rank coal; (4) ash fouling and combustion modification for low-rank coal; (5) combined flue gas cleanup/simultaneous SO/sub x/-NO/sub x/ control; (6) particulate control and hydrocarbons and trace element emissions from low-rank coals; (7) waste characterization and disposal; and (9) exploratory research.

  11. Architecture Concepts and Technical Issues for an Open,Interoperable Automated Demand Response Infrastructure

    SciTech Connect

    Koch, Ed; Piette, Mary Ann

    2007-10-01

    This paper presents the technical and architectural issues associated with automating Demand Response (DR) programs. The paper focuses on a description of the Demand Response Automation Server (DRAS), which is the main component used to automate the interactions between the Utilities and their customers for DR programs. Use cases are presented that show the role of the DRAS in automating various aspects of DR programs. This paper also describes the various technical aspects of the DRAS including its interfaces and major modes of operation. This includes how the DRAS supports automating such Utility/Customer interactions as automated DR bidding, automated DR event handling, and finally real-time pricing.

  12. EDS coal liquefaction process development: Phase V. Quarterly technical progress report, January 1-March 31, 1984

    SciTech Connect

    1984-07-01

    This report is the twenty-first Quarterly Technical Progress Report for US Department of Energy Cooperative Agreement No. DE-FC05-77ET10069 for EDS Coal Liquefaction Process Development Phase V. A detailed comparison of RCLU, CLPP, and ECLP yields has been initiated. This study builds off previous yield modeling results, which found that RCLU, CLPP, and ECLP yields were generally consistent given the scatter of the data, although some differences were noted. These pilot unit yield differences have now been quantified, and operating/configurational differences which account for some of them have been identified. Preliminary yield comparison results after correcting for these known process differences between the pilot plants indicate that: RCLU and CLPP yields are generally consistent; ECLP's conversion is about 5 lb/100 lb DAF coal lower than RCLU/CLPP at comparable operating conditions; and work has been initiated to define the EDS slurry preheater feed system design (based on slurry distributor manifold guidelines and coking correlation predictions, which influence furnace pass control issues such as slurry flow measurement). EDS hydrotreated naphtha showed a low level of systemic toxicity to rats exposed to the vapor six hours per day, five days per week for thirteen weeks.

  13. PFBC HGCU Test Facility. Technical progress report No. 24, Third quarter, CY 1995

    SciTech Connect

    1995-10-01

    This is the twenty-fourth and final Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the work completed during the Third Quarter of CY 1995. All activity this quarter was directed toward the completion of the program final report. A draft copy of the final report was forwarded to DOE during this quarter, and DOE submitted their comments on the report to AEPSC. DOE requested that Westinghouse write an appendix to the report covering the performance of the fail-safe regenerator devices during Tad operation, and Westinghouse subsequently prepared the appendix. Additional DOE comments were incorporated into the report, and it will be issued in camera-ready form by the end of October, 1995, which is the program end date. Appendix 1 presents the results of filter candle posttest examination by Westinghouse performed on selected filter candles following final shutdown of the system.

  14. Establishment of an Institute for Fusion Studies. Technical progress report, November 1, 1991--October 31, 1992

    SciTech Connect

    Hazeltine, R.D.

    1992-07-01

    The Institute for Fusion Studies is a national center for theoretical fusion plasma physics research. Its purposes are: (1) to conduct research on theoretical questions concerning the achievement of controlled fusion energy by means of magnetic confinement--including both fundamental problems of long-range significance, as well as shorter-term issues; (2) to serve as a center for information exchange, nationally and internationally, by hosting exchange visits, conferences, and workshops; (3) and to train students and postdoctoral research personnel for the fusion energy program and plasma physics research areas. The theoretical research results that are obtained by the Institute contribute mainly to the progress of national and international efforts in nuclear fusion research, whose goal is the development of fusion power.as a basic energy source. In addition to its primary focus on fusion physics, the Institute is also involved with research in related fields, such as advanced computing techniques, nonlinear dynamics, plasma astrophysics, and accelerator physics. The work of EFS scientists continued to receive national and international recognition. Numerous invited papers were given during the past year at workshops, conferences, and scientific meetings. Last year IFS scientists published 95 scientific articles in technical journals and monographs.

  15. Texas Experimental Tokamak. Technical progress report, April 1990--April 1993

    SciTech Connect

    Wootton, A.J.

    1993-04-01

    This progress report covers the period from November 1, 1990 to April 30, 1993. During that period, TEXT was operated as a circular tokamak with a material limiter. It was devoted to the study of basic plasma physics, in particular to study of fluctuations, turbulence, and transport. The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics, specifically to conduct a research program under the following main headings: (1) to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks, in particular to understand the role of turbulence; (2) to study physics of the edge plasma, in particular the turbulence; (3) to study the physics or resonant magnetic fields (ergodic magnetic divertors, intra island pumping); and (4) to study the physics of electron cyclotron heating (ECRH). Results of studies in each of these areas are reported.

  16. Power Alcohol Plant, Pfister Bros. Farms. Technical progress report

    SciTech Connect

    Gilbert, Frederick C.

    1981-01-01

    Progress is reported in the process engineering and construction of an alcohol plant. Substrate supply, waste carbohydrate material, has been reduced by 20%. Process heat will be supplied by a stoker boiler fired by natural gas in the initial stages, later by a mixture of corn cobs and coal. The design of the cooker is included. The selection of fermentation tanks has not been made. Studies in the selection of yeast for the project are underway. Distillation equipment is described. An appropriate technology for water removal has not been determined. Tests to determine the thermal efficiency of CaO as a water entraining agent are being conducted. The plant layout and construction schedule diagrams are included. (DMC)

  17. Moving Bed, Granular Bed Filter Development Program: Option 1, Component Test Facility. Task 2, Identification of technical issues

    SciTech Connect

    Haas, J.C.; Wilson, K.B.

    1994-03-01

    Combustion Power, under the auspices of the US Department of Energy, is developing a moving granular-bed filter for the control of particulate in gasification and pressurized fluidized bed environments. In Task 2, technical issues are identified which need to be resolved for the granular-bed filter to be commercially viable. The technical issues are ranked in relative importance.

  18. Power systems development facility. Quarterly technical progress report, July 1--September 30, 1993

    SciTech Connect

    Not Available

    1993-12-31

    This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, July 1 through September 30, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. Hot Gas Cleanup Units to mate to all gas streams; Combustion Gas Turbine; and Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility.

  19. Appalachian Clean Coal Technology Consortium. Quarterly technical progress report, 1996

    SciTech Connect

    Yoon, R.-H.; Phillips, D.I.; Luttrell, G.H.; Basim, B.; Sohn, S.; Jiang, X.; Tao, D.; Parekh, B.K.; Meloy, T.

    1996-10-01

    The Appalachian Clean Coal Technology Consortium (ACCTC) has been established to help U.S. Coal producers, particularly those in the Appalachian region, increase the production of lower-sulfur coal. The cooperative research conducted as part of the consortium activities will help utilities meet the emissions standards established by the 1990 Clean Air Act Amendments, enhance the competitiveness of U.S. coals in the world market, create jobs in economically-depressed coal producing regions, and reduce U.S. dependence on foreign energy supplies. The consortium has three charter members, including Virginia Polytechnic Institute and State University, West Virginia University, and the University of Kentucky. The Consortium also includes industry affiliate members that form an Advisory Committee. In keeping with the recommendations of the Advisory Committee, first-year R&D activities were focused on two areas of research: fine coal dewatering and modeling of spirals. The industry representatives to the Consortium identified fine coal dewatering as the most needed area of technology development. Dewatering studies were conducted by Virginia Tech`s Center for Coal and Minerals Processing and a spiral model was developed by West Virginia University. For the University of Kentucky the advisory board approved a project entitled: ``A Study of Novel Approaches for Destabilization of Flotation Froth``. Project management and administration will be provided by Virginia Tech., for the first year. Progress reports for coal dewatering and destabilization of flotation froth studies are presented in this report.

  20. Texas Experimental Tokamak, a plasma research facility: Technical progress report

    SciTech Connect

    Wootton, A.J.

    1995-08-01

    In the year just past, the authors made major progress in understanding turbulence and transport in both core and edge. Development of the capability for turbulence measurements throughout the poloidal cross section and intelligent consideration of the observed asymmetries, played a critical role in this work. In their confinement studies, a limited plasma with strong, H-mode-like characteristics serendipitously appeared and received extensive study though a diverted H-mode remains elusive. In the plasma edge, they appear to be close to isolating a turbulence drive mechanism. These are major advances of benefit to the community at large, and they followed from incremental improvements in diagnostics, in the interpretation of the diagnostics, and in TEXT itself. Their general philosophy is that the understanding of plasma physics must be part of any intelligent fusion program, and that basic experimental research is the most important part of any such program. The work here demonstrates a continuing dedication to the problems of plasma transport which continue to plague the community and are an impediment to the design of future devices. They expect to show here that they approach this problem consistently, systematically, and effectively.

  1. Development of a polystyrene insulation system. Final technical progress report

    SciTech Connect

    Rupert, J.G.

    1984-09-20

    An adhesive coating system for loose fill polystyrene materials was developed as a product primarily for retrofit insulation of residential buildings that would neither shrink nor settle. Several problems with the coated system including flammability and shrinkage led us to consider an alternative system in which an expanded rock product called perlite was considered as an alternative to polystyrene. The primary problems with perlite are that it is very expensive and the coated structure is extremely brittle. A very attractive commercial market for retrofit insulation using either polystyrene beads or shredded polystyrene was identified. Specifically, it was demonstrated that commercial cement block buildings can be reinsulated by filling the cores of the cement blocks with a payback period of three years. With additional development, it appears that the payback period can be reduced to 2 years at present natural gas prices. The potential market for a commercial system of this kind was analyzed and determined to be on the order of ten billion dollars nationally. The estimated potential energy savings are on order of one quad. At this time, the system is being redesigned to handle commercial buildings which have areas on the order of several hundred thousand square feet. Test marketing of the present system is in progress.

  2. Advanced thermal barrier coating system development. Technical progress report

    SciTech Connect

    1996-10-04

    The objectives of the program are to provide an improved TBC system with increased temperature capability and improved reliability relative to current state of the art TBC systems. The development of such a coating system is essential to the ATS engine meeting its objectives. The base program consists of three phases: Phase 1: Program Planning--Complete; Phase 2: Development; Phase 3: Selected Specimen--Bench Test. Work is currently being performed in Phase 2 of the program. In Phase 2, process improvements will be married with new bond coat and ceramic materials systems to provide improvements over currently available TBC systems. Coating reliability will be further improved with the development of an improved lifing model and NDE techniques. This will be accomplished by conducting the following program tasks: II.1 Process Modeling; II.2 Bond Coat Development; II.3 Analytical Lifing Model; II.4 Process Development; II.5 NDE, Maintenance and Repair; II.6 New TBC Concepts. A brief summary of progress made in each of these 6 areas is given.

  3. Non-technical Issues in Design and Development of Personal Portable Devices.

    PubMed

    Lhotska, Lenka; Cheshire, Paul; Pharow, Peter; Macku, David

    2016-01-01

    Mobile technologies are constantly evolving and with the development of Internet of Things we can expect continuous increase of various applications. Mobile technologies have undeniable opportunities to play an important role in health services. Concerning purely technical aspects, almost every problem can be solved. However, there are still many unsolved and unclear issues related with ethics and governance mechanisms for mobile phone applications. These issues are even more critical in medical and health care applications of mobile technologies. This paper tries to analyse ethical, and privacy-related challenges that may occur when introducing Personal Portable Devices (PPD) to collect and record personal health data in health care and welfare environment. PMID:27071874

  4. Enhancing U.S. competitiveness through federal scientific and technical information - Issues and opportunities

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.

    1990-01-01

    The possibility of using federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

  5. Enhancing US competitiveness through Federal scientific and technical information: Issues and opportunities

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.

    1990-01-01

    The possibility of using Federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of Federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and Federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

  6. Third Progress and Information Report of the Vocational-Technical Education Consortium of States.

    ERIC Educational Resources Information Center

    Lee, Connie W.; And Others

    This description of major activities and accomplishments of the Vocational-Technical Education Consortium of the States (V-TECS) since the second progress report of May, 1975, is designed to provide the reader with a basic understanding of the processes and procedures used by the consortium in achieving its major goal: The production of catalogs…

  7. Second Progress and Information Report of the Vocational-Technical Education Consortium of States.

    ERIC Educational Resources Information Center

    Hirst, Ben A., Jr.

    This second progress and information report of the Vocational-Technical Education Consortium of States (V-TECS) is designed to provide the reader with a basic understanding of the processes and procedures used to develop catalogs of performance objectives and the nature of the cooperative efforts of the members in promoting performance-based…

  8. Education, Industrialization and Technical Progress in Mexico. IIEP Research Report No. 6.

    ERIC Educational Resources Information Center

    Padua, Jorge

    This report attempts to analyze the contributions of the educational system and job training programs to industrialization and technical progress in the Conubal zone of the Lower Balsas River of Mexico. The first of the study's three sections consists of two chapters that provide general background. Chapter 1, "Theories of Development and the Role…

  9. Cassini RTG Program. Monthly technical progress report, 27 November--31 December 1995

    SciTech Connect

    1996-01-24

    This monthly technical progress report provided information on the following tasks: spacecraft integration and liaison; engineering support; safety analysis; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, and reliability, and contractor acquired government owned (CAGO) property acquisition.

  10. Technical Adequacy and Acceptability of Curriculum-Based Measurement and the Measures of Academic Progress

    ERIC Educational Resources Information Center

    January, Stacy-Ann A.; Ardoin, Scott P.

    2015-01-01

    Curriculum-based measurement in reading (CBM-R) and the Measures of Academic Progress (MAP) are assessment tools widely employed for universal screening in schools. Although a large body of research supports the validity of CBM-R, limited empirical evidence exists supporting the technical adequacy of MAP or the acceptability of either measure for…

  11. Technical Assistance Paper: Third-Grade Student Progression. DPS: 2013-56

    ERIC Educational Resources Information Center

    Florida Department of Education, 2013

    2013-01-01

    The purpose of this Technical Assistance Paper (TAP) is to provide school districts with updates and changes relative to third-grade student progression policies, including information on alternative assessments, promotion criteria and resources. This paper provides: (1) General Information; (2) Student Portfolios for Third-Grade Students; (3)…

  12. High explosive safety manual. Fifth quarterly technical progress report, October-December 1979

    SciTech Connect

    Albaugh, L.R.; McBride, D.A.

    1980-01-01

    This is the fifth quarterly technical report on a program to prepare a high explosive safety manual for the Department of Energy. The program is described and progress to date is presented. During this work period, the first draft of the manual was completed and the quantitative risk analysis begun.

  13. [Experimental and theoretical plasma physics program]. Technical progress [in FY 1980

    SciTech Connect

    Griem, H.

    1980-12-31

    This report summarizes the technical progress made in plasma physics research. Studies include: (1) plasma production by means of electric discharges; (2) formation of spheromak configuration using combined z and {theta} pinch techniques; (3) plasma instabilities and plasma diagnostics in toroidal experiments.

  14. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1--July 31, 1998

    SciTech Connect

    1998-09-01

    Progress is reported on research projects related to the following: Electronic resource library; Environment, safety, and health; Communication, education, training, and community involvement; Nuclear and other materials; and Reporting, evaluation, monitoring, and administration. Technical studies investigate remedial action of high explosives-contaminated lands, radioactive waste management, nondestructive assay methods, and plutonium processing, handling, and storage.

  15. Hanford tank clean up: A guide to understanding the technical issues

    SciTech Connect

    Gephart, R.E.; Lundgren, R.E.

    1995-12-31

    One of the most difficult technical challenges in cleaning up the US Department of Energy`s (DOE) Hanford Site in southeast Washington State will be to process the radioactive and chemically complex waste found in the Site`s 177 underground storage tanks. Solid, liquid, and sludge-like wastes are contained in 149 single- and 28 double-shelled steel tanks. These wastes contain about one half of the curies of radioactivity and mass of hazardous chemicals found on the Hanford Site. Therefore, Hanford cleanup means tank cleanup. Safely removing the waste from the tanks, separating radioactive elements from inert chemicals, and creating a final waste form for disposal will require the use of our nation`s best available technology coupled with scientific advances, and an extraordinary commitment by all involved. The purpose of this guide is to inform the reader about critical issues facing tank cleanup. It is written as an information resource for the general reader as well as the technically trained person wanting to gain a basic understanding about the waste in Hanford`s tanks -- how the waste was created, what is in the waste, how it is stored, and what are the key technical issues facing tank cleanup. Access to information is key to better understanding the issues and more knowledgeably participating in cleanup decisions. This guide provides such information without promoting a given cleanup approach or technology use.

  16. Technical and economic feasibility of membrane technology. Fourth technical progress report, June 17-September 16, 1980

    SciTech Connect

    Sandre, A.

    1980-10-01

    Progress is reported on the investigation of the potential application of reverse osmosis, ultrafiltration and electrodialysis to the system of solids concentration in beet sugar process streams. During this period, emphasis was put on running reverse osmosis tests with a new prototype machine to select the most suitable membranes for the concentrating of sugar solutions. An economic analysis of using reverse osmosis in a factory producing 10/sup 6/ gal/day of thin juice is discussed. (DMC)

  17. Development of superior asphalt recycling agency: Phase 1, Technical feasibility. Technical progress report

    SciTech Connect

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Lin, Moon-Sun; Chaffin, J.; Liu, Meng; Eckhardt, C.

    1996-04-01

    About every 12 years, asphalt roads must be reworked, and this is usually done by placing thick layers (hot-mix overlays) of new material on top of failed material, resulting in considerable waste of material and use of new asphalt binder. A good recycling agent is needed, not only to reduce the viscosity of the aged material but also to restore compatibility. Objective is to establish the technical feasibility (Phase I) of determining the specifications and operating parameters for producing high quality recycling agents which will allow most/all the old asphalt-based road material to be recycled. It is expected that supercritical fractionation can be used. The advanced road aging simulation procedure will be used to study aging of blends of old asphalt and recycling agents.

  18. Professional technical support services for the Mining Equipment Test Facility. First annual technical progress report, April 14-September 30, 1981

    SciTech Connect

    Garson, R C

    1981-10-01

    The Department of Energy recently began the operation of its Mining Equipment Test Facility. One component at that facility is the highly sophisticated Mine Roof Simulator (MRS) for research and development of roof support equipment. Because of its previous experience, the University of Pittsburgh was contracted to assist the Facilities Manager by providing professional technical support services, principally for the MRS. This technical progress report briefly describes the services provided during the reporting period and planned for the next period. No significant technical disclosures of interest to those not associated with the MRS are contained herein. One of the four units of the US government-owned METF is the Mine Roof Simulator. This unique $10 million test facility was designed to simulate underground mine roof loads and motions. The MRS is a hybrid, analog-digital, computer-controlled, closed-loop, electro-hydraulic, research device capable of applying either loads or displacements in the vertical and one horizontal axis. Its vertical capacity of 3,000,000 pounds can be applied over its 20 by 20 foot active test area. The horizontal load capacity is 1,600,000 pounds. It can simulate coal seam heights of up to 16 feet. Automatic data acquisition and real time display are provided. The most modern, sophisticated technology was used in its design and construction.

  19. PFBC HGCU test facility technical progress report. First Quarter, CY 1994

    SciTech Connect

    Not Available

    1994-04-01

    This is the eighteenth Technical Progress Report submitted in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. During this quarter, the Tidd Hot Gas Clean Up System operated for 835 hours during six separate test runs. The system was starting into a seventh run at the end of the quarter. Highlights of this period are summarized below: the longest run during the quarter was approximately 333 hours; filter pressure drop was stable during all test runs this quarter using spoiling air to the primary cyclone upstream of the Advanced Particle Filter (APF); the tempering air system was commissioned this quarter which enabled the unit to operate at full load conditions while limiting the gas temperature in the APF to 1,400 F; during a portion of the one run, the tempering air was removed and the filter operated without problems up to 1,450 F; ash sampling was performed by Battelle personnel upstream and downstream of the APF and ash loading and particle size distribution data were obtained, a summary report is included; a hot area on the APF head was successfully repaired in service; a hot spot on the top of an expansion joint was successfully repaired by drilling holes from the inside of the pipe and pumping in refractory insulation; a corrosion inspection program for the HGCU system was issued giving recommendations for points to inspect; filter internal inspections following test runs 13 and 17 revealed a light coating (up to 1/4 inch thick) of residual ash on the candles and some ash bridging between the dust sheds and inner rows of candles. Data from these inspections are included with this report.

  20. Pittsburgh Energy Technology Center quarterly technical progress report for the period ending September 30, 1985

    SciTech Connect

    Not Available

    1986-06-01

    Encouraging progress was made toward the development of acid rain control technology. PETC competitively selected and awarded contracts totaling over $8 million over the next three years to firms proposing new concepts for reducing the costs of cleaning the flue gas emissions of older, coal-burning power plants. PETC and ANL have undertaken a joint venture in dry flue-gas scrubbing that will ultimately lead to testing of a sorbent for combined SO/sub x/ and NO/sub x/ removal in Argonne's 20-megawatt spray dryer. The overall objective of a high-sulfur coal research program is to conduct a broad spectrum of coal-related research in order to increase and expand the use of coal in an environmentally acceptable manner. In the liquefaction program area, operations with Wyodak subbituminous coal are proceeding smoothly (Run 249) at the Wilsonville Process Development Unit. Understanding the processes involved in catalyst deactivation is important to the development of longer lived catalysts. In the area of process analysis, PETC has acquired a new version of ASPEN (Advanced System for Process Engineeering) software. The new version was recently installed on PETC's VAX/VMS operating system and is the most up-to-date version currently available. Work at PETC has resulted in the development and testing of a highly automated capillary tube viscometer for use with heavy coal-derived liquids. Results of PETC research in Fischer-Tropsch product characterization were also shared with the technical community. A particularly difficult analytical problem in the characterization of Fischer-Tropsch products is quantitative determination of carbon number distributions by compound class. PETC scientists developed a method that uses capillary gas chromatographic techniques to make these determinations. A paper describing the method was the lead article in the July 1985 issue of the Journal of Chromatographic Science and was featured on the cover.

  1. Honoring Progress: An Update on the NGA Center Honor States. Volume 1, Issue 6

    ERIC Educational Resources Information Center

    Hartney, Michael, Ed.

    2008-01-01

    This bimonthly newsletter provides information about the progress of the Honor States Grant Program, a governor-led effort to improve college--and work-ready graduation rates. This issue explores how effective education governance can support innovative state policy development, successful policy implementation, and a redesigned high school…

  2. Honoring Progress: An Update on the NGA Center Honor States. Volume 1, Issue 5

    ERIC Educational Resources Information Center

    Hartney, Michael, Ed.

    2007-01-01

    This bimonthly newsletter provides information about the progress of the Honor States Grant Program, a governor-led effort to improve college--and work-ready graduation rates. This issue spotlights the "supply-side" of high school redesign, exploring how state policymakers are working to expand the supply of high-quality high schools. The…

  3. Honoring Progress: An Update on the NGA Center Honor States. Volume 1, Issue 1

    ERIC Educational Resources Information Center

    Shawe, Torrey, Ed.

    2006-01-01

    This bimonthly newsletter provides information about the progress of the Honor States Grant Program, a governor-led effort to improve college- and work-ready graduation rates. This issue explores science, technology, engineering, and math education (STEM), a priority for governors as they try to enhance workforce competitiveness in a global…

  4. Biomass energy technology annual technical progress report, FY 1982. Volume II. Technical summary

    SciTech Connect

    Not Available

    1982-01-01

    The goal of the BET program is to conduct an integrated R and D program for feedstock production and conversion of organic materials to economically produce energy products that will significantly contribute to meeting long-term US energy needs. In feedstock production, laboratory investigations are being performed to reduce the risks associated with the production of microalgal oils that can be used for energy applications and high-value chemical substitutes. Research also is being done on the biochemical mechanisms that control hydrocarbon production by macroalgal species. There has been significant progress in the DOE Short-Rotation Woods Crops Program aimed at increasing yields of biomass through both improved traditional/conventional silvicultural techniques and short-rotation intensive culture. Studies that evaluate the potential of milkweed as an energy feedstock were completed in FY 1982. In thermochemical conversion, evaluations of a variety of high-performance gasification systems for producing medium-Btu gas and synthesis gas were concluded in FY 1982. Free market forces are expected to stimulate private sector interest in developing the technology and marketing needed to commercialize medium-Btu gasification systems. Medium-Btu gases have numerous beneficial industrial applications, and this technology is close to entry into the marketplace. Progress has been made in FY 1982 toward understanding the basic mechanisms and kinetics affecting the thermochemical processing of biomass through fast pyrolysis and direct liquefaction techniques. In biochemical conversion, fundamental research is being performed on the anaerobic digestion process. FY 1982 research activities also included laboratory-scale experiments on photobiological methods for hydrogen production. Separate abstracts have been prepared for each of the 3 program areas for inclusion in the Energy Data Base. (DMC)

  5. Technical and policy issues related to semantically and spatially incompatible geodata

    SciTech Connect

    Bespalko, S.J.; Ganter, J.H.; Meter, M.D. Van

    1995-07-01

    Both the Intelligent Transportation Systems (ITS) and National Information Infrastructure (NU) efforts have ambitious goals that are expected to improve the fundamental infrastructure, commerce, and society of the United States. Achieving these goals will require rapid development and deployment of information compatibility methods through technical and institutional standards. These standards will have to be scaleable and flexible to support new, and as-yet-undiscovered, data. Yet they will also need to accommodate our valuable data reserves. The area of geospatial data, and thus the creation of a National Spatial Data Infrastructure (NSDI), is particularly challenging due to the profoundly different forms, evolutionary histories, and meanings attached to spatial data. We discuss technical issues resulting from the different natures and inaccuracy of existing geodata, and areas where federal policy could lead the way to greater compatibility.

  6. Subsurface Contaminant Focus Area: Monitored Natural Attenuation (MNA)--Programmatic, Technical, and Regulatory Issues

    SciTech Connect

    Krupka, Kenneth M.; Martin, Wayne J.

    2001-07-23

    Natural attenuation processes are commonly used for remediation of contaminated sites. A variety of natural processes occur without human intervention at all sites to varying rates and degrees of effectiveness to attenuate (decrease) the mass, toxicity, mobility, volume, or concentration of organic and inorganic contaminants in soil, groundwater, and surface water systems. The objective of this review is to identify potential technical investments to be incorporated in the Subsurface Contaminant Focus Area Strategic Plan for monitored natural attenuation. When implemented, the technical investments will help evaluate and implement monitored natural attenuation as a remediation option at DOE sites. The outcome of this review is a set of conclusions and general recommendations regarding research needs, programmatic guidance, and stakeholder issues pertaining to monitored natural attenuation for the DOE complex.

  7. Examining the Technical Adequacy of Second-Grade Reading Comprehension Measures in a Progress Monitoring Assessment System. Technical Report # 08-08

    ERIC Educational Resources Information Center

    Alonzo, Julie; Liu, Kimy; Tindal, Gerald

    2008-01-01

    This technical report describes the development of reading comprehension assessments designed for use as progress monitoring measures appropriate for 2nd Grade students. The creation, piloting, and technical adequacy of the measures are presented. The following are appended: (1) Item Specifications for MC [Multiple Choice] Comprehension - Passage…

  8. Evaporation by mechanical vapor recompression. Technical progress report, January 1, 1980-April 1, 1980

    SciTech Connect

    Iverson, C.H.; Coury, G.E.

    1980-01-01

    Progress for the period from January 1, 1980 to April 1, 1980, in the development of a study of the application of the technologies of Mechanical Vapor Recompression and Falling Film Evaporation as applied to the beet sugar industry is reported. Progress is reported in the following areas: technical literature search; report on visit to European factories using these technologies; energy balance studies of facories offered by the industry as candidates for the demonstration plants; and report on energy balance studies and the recommendations as to the site for the demonstration plant.

  9. Development of superior asphalt recycling agents. Phase 1, Technical feasibility. Technical progress report

    SciTech Connect

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Chaffin, J.; Lin, Moon-Sun

    1995-07-01

    About 27 million tons of asphalt and nearly twenty times this much aggregate are consumed each year to build and maintain over two million miles of roads in this country. Over a cycle of about 12 years on the average, these roads must be reworked and much of these millions of tons of rock and asphalt cannot be reused with present recycling technology. Instead, much of the maintenance is accomplished by placing thick layers (hot-mix overlays) of new material on top of the failed material. This results in considerable waste of material, both in terms of quality aggregate and in terms of asphalt binder. In addition, the new asphalt binder represents a significant source of potential energy. The main impediment to recycling asphalt binder is the poorly developed science of recycling agent composition and, as a result, optimum recycling agents are not available. An excellent recycling agent should not only be able to reduce the viscosity of the aged material, but it must also be able to restore compatibility. The properties of the old material and recycling agent must be compatible to give both good initial properties and aging characteristics, and this must be understood. The agent must also be inexpensive and easily manufactured. A large quantity of potential feedstock for the production of recycling agents is available and much of it is now fed to cokers. This material could be recovered by supercritical extraction which is an existing refinery technology. A supercritical pilot plant is available at Texas A&M and has been used to produce fractions for study. The objective of this research is to establish the technical feasibility of determining the specifications and operating parameters necessary to produce high quality recycling agents which will allow most old asphalt-based road material to be recycled.

  10. FY07 Summary of System Interface and Support Systems R&D and Technical Issues Map

    SciTech Connect

    Steven R. Sherman

    2007-09-01

    This document provides a summary of research and development activities in the System Interface and Support Systems area of the DOE Nuclear Hydrogen Initiative in FY 2007. Project cost and performance data obtained from the PICS system, at least up through July 2007, are presented and analyzed. Brief summaries of accomplishments and references are provided. A mapping of System Interface and Support Systems technical issues versus the work performed is updated and presented. Lastly, near-term research plans are described, and recommendatioins are provided for additional research.

  11. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 1 April 1996--29 September 1996

    SciTech Connect

    1996-10-20

    This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996.

  12. Advanced Coal Conversion Process Demonstration Project. Technical progress report, January 1, 1995--March 31, 1995

    SciTech Connect

    1996-06-01

    This detailed report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project. This U.S. Department of Energy (DOE) Clean Coal Technology Project demonstrates an advanced thermal coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to high-quality, low-sulfur fuel. During this reporting period, the primary focus for the project was to expand market awareness and acceptability for the products and the technology. The use of covered hopper cars has been successful and marketing efforts have focused on this technique. Operational improvements are currently aimed at developing fines marketing systems, increasing throughput capacity, decreasing operation costs, and developing standardized continuous operator training. Testburns at industrial user sites were also conducted. A detailed process description; technical progress report including facility operations/plant production, facility testing, product testing, and testburn product; and process stability report are included. 3 figs., 8 tabs.

  13. Nuclear magnetic resonance studies of granular flows: Technical progress report, quarter ending 09/30/93

    SciTech Connect

    Not Available

    1993-10-27

    This Technical Progress Report for the quarter ending 09/30/93 describes work on two tasks which are part of nuclear magnetic resonance studies of granular flows. (1) Research has been directed toward improving concentration measurements under reasonably fast conditions. (2) The process continues of obtaining comprehensive velocity, concentration, and diffusion information at several angular velocities of the cylinder for seeds (mustard, sesame, and sunflower seeds) flowing in a half-filled cylinder.

  14. Cassini RTG Program. Monthly technical progress report, October 2--October 29, 1995

    SciTech Connect

    1995-11-24

    The technical progress achieved during the period 2 October through 29 October, 1995 is described herein. This report is organized by program task structure: (1) spacecraft integration and liaison; (2) engineering support; (3) safety; (4) qualified unicouple production; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and GACO maintenance and repair; and CAGO acquisition (capital funds).

  15. Cassini RTG Program monthly technical progress report, July 28--August 24, 1997

    SciTech Connect

    1997-09-24

    The technical progress achieved during this period is described. This report is organized by program task structure: (1) spacecraft and integration liaison; (2) engineering support; (3) safety; (4) qualified unicouple production; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and (10) CAGO acquisition (capital funds).

  16. Confined Vortex Scrubber. Quarterly technical progress report, October 1, 1989--December 31, 1989

    SciTech Connect

    Not Available

    1990-02-01

    The program objective is to demonstrate efficient removal of fine particulates to sufficiently low levels to meet proposed small scale coal combustor emission standards. This is to be accomplished using a novel particulate removal device, the Confined Vortex Scrubber. This is the first quarterly technical progress report under this contract. Accordingly, a summary of the cleanup concept and the structure of the program is given here.

  17. Cassini RTG Program. Monthly technical progress report, October 30--November 26, 1995

    SciTech Connect

    1995-12-24

    The technical progress achieved during the period 30 October through 26 November, 1995 is described herein. This report is organized by program task structure: (1) spacecraft integration and liaison; (2) engineering support; (3) safety; (4) qualified unicouple production; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and GACO maintenance and repair; and CAGO acquisition (capital funds).

  18. Fitness for duty in the nuclear power industry: A review of technical issues

    SciTech Connect

    Moore, C.; Barnes, V.; Hauth, J.; Wilson, R.; Fawcett-Long, J.; Toquam, J.; Baker, K.; Wieringa, D.; Olson, J.; Christensen, J.

    1989-05-01

    This report presents information gathered and analyzed in support of the US Nuclear Regulatory Commission's (NRC's) efforts to develop a rule that will ensure that workers with unescorted access to protected areas of nuclear power plants are fit for duty. This report supplements information previously published in NUREG/CR-5227, Fitness for Duty in the Nuclear Power Industry: A Review of Technical Issues (Barnes et al., 1988). The primary potential fitness-for-duty concern addressed in both of these reports is impairment caused by substance abuse, although other fitness concerns are discussed. This report addresses issues pertaining to workers' use and misuse of alcohol, prescription drugs, and over-the-counter drugs as fitness-for-duty concerns; responds to several questions raised by NRC Commissioners; discusses subversion of the chemical testing process and methods of preventing such subversion; and examines concerns about the urinalysis cutoff levels used when testing for marijuana metabolites, amphetamines, and phencyclidine (PCP).

  19. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1994

    SciTech Connect

    Not Available

    1994-05-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Reports on a quarterly basis. This report comprises the first Quarterly Technical Progress Report for Year 2 of the Agreement. This report reflects the progress and/or efforts performed on the sixteen (16) technical projects encompassed by the Year 2 Agreement for the period of January 1 through March 31, 1994. In situ bioremediation of chlorinated organic solvents; Microbial enrichment for enhancing in-situ biodegradation of hazardous organic wastes; Treatment of volatile organic compounds (VOCs) using biofilters; Drain-enhanced soil flushing (DESF) for organic contaminants removal; Chemical destruction of chlorinated organic compounds; Remediation of hazardous sites with steam reforming; Soil decontamination with a packed flotation column; Use of granular activated carbon columns for the simultaneous removal of organics, heavy metals, and radionuclides; Monolayer and multilayer self-assembled polyion films for gas-phase chemical sensors; Compact mercuric iodide detector technology development; Evaluation of IR and mass spectrometric techniques for on-site monitoring of volatile organic compounds; A systematic database of the state of hazardous waste clean-up technologies; Dust control methods for insitu nuclear and hazardous waste handling; Winfield Lock and Dam remediation; and Socio-economic assessment of alternative environmental restoration technologies.

  20. Review and Prioritization of Technical Issues Related to Burnup Credit for LWR Fuel

    SciTech Connect

    Parks, C V; DeHart, M D; Wagner, John C

    2000-03-13

    This report has been prepared to review relevant background information and provide technical discussion that will help initiate a PIRT (Phenomena Identification and Ranking Tables) process for use of burnup credit in light-water reactor (LWR) spent fuel storage and transport cask applications. The PIRT process will be used by the NRC Office of Nuclear Regulatory Research to help prioritize and guide a coordinated program of research and as a means to obtain input/feedback from industry and other interested parties. The review and discussion in this report are based on knowledge and experience gained from work performed in the United States and other countries. Current regulatory practice and perceived industry needs are also reviewed as a background for prioritizing technical needs that will facilitate safe practice in the use of burnup credit. Relevant physics and analysis phenomenon are identified, and an assessment of their importance to burnup credit implementation is given. Finally, phenomena that need to be better understood for effective licensing, together with technical issues that require resolution, are presented and discussed in the form of a prioritization ranking and initial draft program plan.

  1. Website design: technical, social and medical issues for self-reporting by elderly patients.

    PubMed

    Taylor, Mark J; Stables, Rod; Matata, Bashir; Lisboa, Paulo J G; Laws, Andy; Almond, Peter

    2014-06-01

    There is growing interest in the use of the Internet for interacting with patients, both in terms of healthcare information provision and information gathering. In this article, we examine the issues in designing healthcare websites for elderly users. In particular, this article uses a year-long case study of the development of a web-based system for self-reporting of symptoms and quality of life with a view to examine the issues relating to website design for elderly users. The issues identified included the technical, social and medical aspects of website design for elderly users. The web-based system developed was based on the European Quality of Life 5-Dimensions health-status questionnaire, a commonly used tool for patient self-reporting of quality of life, and the more specific coronary revascularisation outcome questionnaire. Currently, self-reporting is generally administered in the form of paper-based questionnaires to be completed in the outpatient clinic or at home. There are a variety of issues relating to elderly users, which imply that websites for elderly patients may involve different design considerations to other types of websites. PMID:24047573

  2. Advanced direct liquefaction concepts for PETC generic units. Quarterly technical progress report, April 1993--June 1993

    SciTech Connect

    Not Available

    1993-08-01

    Section 1 contains a report of the progress by the University of Kentucky Center for Applied Energy Research on the following tasks: laboratory support (liquefaction in dewaxed and hydrotreated dewaxed solvent); CO pretreatment (effect of process variables on CO pretreatment, CO-pretreated product characterization, and liquefaction results); and iron based dispersed catalysts (production, characterization and testing of sulfated hematites and reaction model development). Section 2 contains a progress report by CONSOL, Inc. on the following tasks: laboratory support; pretreatment work on dewaxing; pretreatment work on agglomeration; and economic evaluation. Progress by Sandia National Laboratories is reported in Section 3 on the following: laboratory support (TGA methods) and solvent pretreatment (coker tar hydrogenation and coal liquefaction results). Section 4 gives a preliminary technical assessment by LDP Associates on the following: baseline economic assessment; assessment of improved coal conversion; and fluid coking.

  3. Generation and focusing of pulsed intense ion beams. Technical progress report, 1 October 1982 - 30 September, 1983

    SciTech Connect

    Hammer, D.A.; Kusse, B.R.; Sudan, R.N.

    1983-07-01

    The progress on this contract is described in three parts. The first deals with the technical operation of the LION accelerator. The second and third parts are concerned with the experimental results.

  4. Inherent safety advantages of carbide fuel systems and technical issues regarding natural convection in LMRs

    SciTech Connect

    Barthold, W.P.

    1984-08-01

    The scope of work is to summarize inherent safety advantages that are unique to the use of a carbide based fuel system and to summarize the technical issues regarding natural convection flow in LMFBR cores. As discussed in this report, carbide fuel provides the designer with far greater flexibility than oxide fuel. Carbide fuel systems can be designed to eliminate major accident initiators. They turn quantitative advantages into a qualitative advantage. The author proposed to LANL a series of core design and component concepts that would greatly enhance the safety of carbide over oxide systems. This report cites a series of safety advantages which potentially exist for a carbide fuel system. Natural convection issues have not been given much attention in the past. Only during the last few years has this issue been addressed in some detail. Despite claims to the contrary by some of the LMR contractors, the author does not think that the natural convection phenomena is fully understood. Some of the approximations made in natural convection transient analyses have probably a greater impact on calculated transient temperatures than the effects under investigation. Only integral in-pile experimental data and single assembly out-of-pile detailed data are available for comparisons with analytical models and correlations. Especially for derated cores, the natural convection capability of a LMR should be far superior to that of a LWR. The author ranks the natural convection capability of the LMR as the most important inherent safety feature.

  5. National Council on Radiation Protection and Measurements semiannual technical progress report, March 1989--August 1989

    SciTech Connect

    Ney, W.R.

    1991-01-01

    This semiannual technical progress report is for the period 1 March 1989 through 31 August 1989. This National Council on Radiation Protection and Measurements (NCRP) program is designed to provide recommendations for radiation protection based on scientific principles. During this period several reports were published covering the topics of occupational radiation exposure, medical exposure, radon control, dosimetry, and radiation protection standards. Accomplishments of various committees are also reported; including the committees on dental x-ray protection, radiation safety in uranium mining and milling, ALARA, instrumentation, records maintenance, occupational exposures of medical personnel, emergency planning, and others. (SM)

  6. Monthly technical progress report, 29 January 1996--25 Februray 1996

    SciTech Connect

    1996-04-01

    This report discusses the technical progress made on the radioisotope thermoelectric generators and ancillary activities for the Cassini space probe mission to the planet Saturn. The probe is designated for launch in October of 1997. This report covers the project reporting period from 29 January 1996 through 25 February 1996. The report is organized by program task structure and includes activities for: spacecraft integration and liason; engineering support; safety; qualified unicouple production; ETG fabrication, assembly, and testing; RTG shipping and launch support; designs, reviews and mission applications; quality assurance, reliability and contract changes; and CAGO acquisition.

  7. Demonstrate fuel disassembly/encapsulation. Technical progress report, April 1981-June 1981

    SciTech Connect

    1981-08-03

    Work on this project is focused on demonstrating disassembly and encapsulation of nuclear fuels as a means to increase spent fuel storage. The effort commenced on April 17, 1980, and is progressing satisfactorily. The Equipment/Procedure Preparation sub-task is essentially complete. The Equipment Demonstration sub-task and the Process Assessment Studies sub-task continue. The equipment design effort associated with the first sub-task, the component testing and checking associated with the second sub-task, and the technical studies and investigations associated with the latter sub-task continue to verify the feasibility of this concept to enhance the use of fuel storage resources.

  8. CGE simulation analysis on the labor transfer, agricultural technical progress, and economic development in Chongqing.

    PubMed

    Wang, Heng; Ran, Maosheng

    2014-01-01

    The basic structure of a CGE model dividing Mainland China into two parts, including Chongqing and rest regions, is described. Based on this CGE model, both the unilateral impact and collaborative impact of two policies, agricultural technical progress and supporting policies for improving rural labor transfer on the economic development in Chongqing, are simulated and analyzed. The results demonstrate that compared with the sum of each unilateral policy effect, the collaboration of two policies has more effective impact on facilitating the labor transfer, promoting regional economic growth, and improving income and welfare of urban and rural residents. PMID:24892037

  9. CGE Simulation Analysis on the Labor Transfer, Agricultural Technical Progress, and Economic Development in Chongqing

    PubMed Central

    Wang, Heng; Ran, Maosheng

    2014-01-01

    The basic structure of a CGE model dividing Mainland China into two parts, including Chongqing and rest regions, is described. Based on this CGE model, both the unilateral impact and collaborative impact of two policies, agricultural technical progress and supporting policies for improving rural labor transfer on the economic development in Chongqing, are simulated and analyzed. The results demonstrate that compared with the sum of each unilateral policy effect, the collaboration of two policies has more effective impact on facilitating the labor transfer, promoting regional economic growth, and improving income and welfare of urban and rural residents. PMID:24892037

  10. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1993

    SciTech Connect

    Not Available

    1993-04-01

    This reports reports the progress/efforts performed on six technical projects: 1. systematic assessment of the state of hazardous waste clean-up technologies; 2. site remediation technologies (SRT):drain- enhanced soil flushing for organic contaminants removal; 3. SRT: in situ bio-remediation of organic contaminants; 4. excavation systems for hazardous waste sites: dust control methods for in-situ nuclear waste handling; 5. chemical destruction of polychlorinated biphenyls; and 6. development of organic sensors: monolayer and multilayer self-assembled films for chemical sensors.

  11. Heber geothermal binary demonstration project quarterly technical progress report, October 1, 1982--December 31, 1982

    SciTech Connect

    Lacy, R.G.; Allen, R.F.; Dixon, J.R.; Hsiao, W.P.; Liparidis, G.S.; Lombard, G.L.; Nelson, T.T.; Van De Mark, G.D.

    1983-05-01

    The purpose of this quarterly technical progress report is to document work completed on the nominal 65 Megawatt (Mwe gross) Heber Geothermal Binary Demonstration Project, located at Heber, California, during the period of October 1, 1982--December 31, 1982. The work was performed by San Diego Gas and Electric Company under the support and cooperation of the U.S. Department of Energy, the Electric Power Research Institute, the Imperial Irrigation District, the California Department of Water Resources, and the Southern California Edison Company. Topics covered in this quarterly report include progress made in the areas of Wells and Fluid Production and Injection Systems, Power Plant Design and Construction, Power Plant Demonstration, and Data Acquisition and Dissemination.

  12. Heber geothermal binary demonstration project quarterly technical progress report, July 1, 1982--September 30, 1982

    SciTech Connect

    Lacy, R.G.; Allen, R.F.; Dixon, J.R.; Hsiao, W.P.; Liparidis, G.S.; Lombard, G.L.; Nelson, T.T.; Van De Mark, G.D.

    1983-03-01

    The purpose of this quarterly technical progress report is to document work completed on the nominal 65 Megawatt (Mwe gross) Heber Geothermal Binary Demonstration Project, located at Heber, California, during the period of July 1, 1982--September 30, 1982. The work was performed by San Diego Gas and Electric Company under the support and cooperation of the U.S. Department of Energy, the Electric Power Research Institute, the Imperial Irrigation District, the California Department of Water Resources, and the Southern California Edison Company. Topics covered in this quarterly report include progress made in the areas of Wells and Fluid Production and Injection Systems, Power Plant Design and Construction, Power Plant Demonstration, and Data Acquisition and Dissemination.

  13. Heber geothermal binary demonstration project quarterly technical progress report, January 1, 1982--March 31, 1982

    SciTech Connect

    Lacy, R.G.; Allen, R.F.; Alsup, R.A.; Liparidis, G.S.; Van De Mark, G.D.

    1983-08-01

    The purpose of this quarterly technical progress report is to document work completed on the nominal 65 Megawatt (Mwe gross) Heber Geothermal Binary Demonstration Project, located at Heber, California, during the period of January 1, 1982, through March 31, 1982. The work was performed by San Diego Gas and Electric Company under the support and cooperation of the U.S. Department of Energy, the Electric Power Research Institute, the Imperial Irrigation District, the California Department of Water Resources, and the Southern California Edison Company. Topics covered in this quarterly report include progress made in the areas of Wells and Fluid Production and Injection Systems, Power Plant Design and Construction, Power Plant Demonstration, and Data Acquisition and Dissemination.

  14. Heber geothermal binary demonstration project quarterly technical progress report, April 1, 1982--June 30, 1982

    SciTech Connect

    Lacy, R.G.; Allen, R.F.; Alsup, R.A.; Liparidis, G.S.; Van De Mark, G.D.

    1983-08-01

    The purpose of this quarterly technical progress report is to document work completed on the nominal 65 Megawatt (Mwe gross) Heber Geothermal Binary Demonstration Project, located at Heber, California, during the period of April 1, 1982-June 30, 1982. The work was performed by San Diego Gas and Electric Company under the support and cooperation of the U.S. Department of Energy, the Electric Power Research Institute, the Imperial Irrigation District, the California Department of Water Resources, and the Southern California Edison Company. Topics covered in this quarterly report include progress made in the areas of Wells and Fluid Production and Injection Systems, Power Plant Design and Construction, Power Plant Demonstration, and Data Acquisition and Dissemination.

  15. Progression in Ethical Reasoning When Addressing Socio-scientific Issues in Biotechnology

    NASA Astrophysics Data System (ADS)

    Berne, Birgitta

    2014-11-01

    This article reports on the outcomes of an intervention in a Swedish school in which the author, a teacher-researcher, sought to develop students' (14-15 years old) ethical reasoning in science through the use of peer discussions about socio-scientific issues. Prior to the student discussions various prompts were used to highlight different aspects of the issues. In addition, students were given time to search for further information themselves. Analysis of students' written arguments, from the beginning of the intervention and afterwards, suggests that many students seem to be moving away from their use of everyday language towards using scientific concepts in their arguments. In addition, they moved from considering cloning and 'designer babies' solely in terms of the present to considering them in terms of the future. Furthermore, the students started to approach the issues in additional ways using not only consequentialism but also the approaches of virtue ethics, and rights and duties. Students' progression in ethical reasoning could be related to the characteristics of the interactions in peer discussions as students who critically and constructively argued with each other's ideas, and challenged each other's claims, made progress in more aspects of ethical reasoning than students merely using cumulative talk. As such, the work provides valuable indications for the importance of introducing peer discussions and debates about SSIs in connection to biotechnology into the teaching of science in schools.

  16. Projects at the Component Development and Integration Facility. Quarterly technical progress report, July 1--September 30, 1993

    SciTech Connect

    Not Available

    1993-12-31

    This quarterly technical progress report presents progress on the projects at the Component Development and Integration Facility (CDIF) during the first quarter of FY94. The CDIF is a major US Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: MHD Proof-of-Concept project; mine waste technology pilot program; plasma projects; resource recovery project; sodium sulfide/ferrous sulfate project; soil washing project; and spray casting project.

  17. Projects at the Component Development and Integration Facility. Quarterly technical progress report, October 1--December 31, 1992

    SciTech Connect

    Not Available

    1992-12-31

    This quarterly technical progress report presents progress on the projects at the component Development and Integration Facility (CDIF) during the first quarter of FY93. The CDIF is a major US Department of Energy (DOE) test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: MHD proof-of-concept project; mine waste pilot program; plasma projects; resource recovery project; sodium sulfide/ferrous sulfate project; soil washing project; and spray casting project.

  18. Projects at the Component Development and Integration Facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

    SciTech Connect

    Not Available

    1994-08-01

    This quarterly technical progress report presents progress on the projects at the Component Development and Integration Facility (CDIF) during the second quarter of FY94. The CDIF is a major US Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Pilot Program; Plasma Projects; Resource Recovery Project; Sodium Sulfide/Ferrous Sulfate Project; and Spray Casting Project.

  19. Projects at the Component Development and Integration Facility. Quarterly technical progress report, April 1--June 30, 1993

    SciTech Connect

    Not Available

    1993-12-01

    This quarterly technical progress report presents progress on the projects at the Component Development and Integration Facility (CDIF) during the third quarter of FY93. The CDIF is a major US Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: MHD Proof-of-Concept Project; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Sodium Sulfide/Ferrous Sulfate Project; Soil Washing Project; and Spray Casting Project.

  20. Progress in Emission Efficiency of Organic Light-Emitting Diodes: Basic Understanding and Its Technical Application

    NASA Astrophysics Data System (ADS)

    Tsutsui, Tetsuo; Takada, Noriyuki

    2013-11-01

    The technical history of when and how the basic understanding of the emission efficiency of organic light-emitting diodes (OLEDs) was established over the last 50 years is described. At first, our understanding of emission efficiency in single-crystal and thin-film electroluminescence (EL) devices in the early stages before the Eastman-Kodak breakthrough, that is, the introduction of the concept of multilayer structures, is examined. Then our contemplation travels from the Eastman-Kodak breakthrough towards the presently widely accepted concept of emission efficiency. The essential issues concerning the emission efficiency of OLEDs are summarized to help readers to obtain a common understanding of OLED efficiency problems, and detailed discussions on the primary factors that determine emission efficiency are given. Finally, some comments on remaining issues are presented.

  1. The Development and Technical Adequacy of Seventh-Grade Reading Comprehension Measures in a Progress Monitoring Assessment System. Technical Report #1102

    ERIC Educational Resources Information Center

    Park, Bitnara Jasmine; Alonzo, Julie; Tindal, Gerald

    2011-01-01

    This technical report describes the process of development and piloting of reading comprehension measures that are appropriate for seventh-grade students as part of an online progress screening and monitoring assessment system, http://easycbm.com. Each measure consists of an original fictional story of approximately 1,600 to 1,900 words with 20…

  2. Examining the Technical Adequacy of Fifth-Grade Reading Comprehension Measures in a Progress Monitoring Assessment System. Technical Report # 08-07

    ERIC Educational Resources Information Center

    Alonzo, Julie; Tindal, Gerald

    2008-01-01

    This technical report describes the development and piloting of reading comprehension measures developed for use by fifth-grade students as part of an online progress monitoring assessment system, http://easycbm.com. Each comprehension measure is comprised of an original work of narrative fiction approximately 1500 words in length followed by 20…

  3. Shale oil value enhancement research. First quarterly technical progress report, March 1, 1993--May 31, 1993

    SciTech Connect

    Bunger, J.W.; Russell, C.P.; Devineni, P.A.V.; Cogswell, D.E.; Wiser, J.W.

    1993-06-25

    Concurrent progress is being made in all key areas, namely, separation, characterization and market assessment. The market area, not one of our traditionally strong areas, has been going better than expected. We believe this is due mainly to the emerging interest in new and unconventional materials. The characterization work has been progressing solidly with the fundamental Z-BASIC correlations providing information not heretofore available in the chemical literature. Our agreement with Hewlett-Packard regarding the purchase of equipment at a reduced price is complete and the gc-ms will be ordered shortly. The separation work has progressed satisfactorily although an unexpected amount of time has been required for ``facilities`` and ``equipment`` related issues. Some of these issues have dealt with safety and regulatory compliance when storing larger quantities of samples. These now seem to be solved. We have a lot of direct experience in shale oil separations dating back to the OXY project and before. Also, we will streamline our work by going to prepacked micro-separation tools for some of our separation characterization work. This will allow us to stay on schedule. Overall, we are on schedule with the project. All administration requirements are in place and the accounting and financial records are current.

  4. Recent Progress and Future Issues in the Management of Abusive Head Trauma

    PubMed Central

    NISHIMOTO, Hiroshi

    2015-01-01

    Head trauma is the leading cause of death in child abuse cases and one of the important issues in the care of abused children. Since the Child Abuse Prevention Law was enforced in 2000 in Japan, various measures have been taken to prevent child abuse over the following decade. Accordingly, medical research on abusive head trauma (AHT) has advanced, leading to significant progress in the medical diagnosis of AHT. This progress has been brought about by (1) the widespread establishment of child protection teams (CPTs) at core hospitals, (2) the progress in neuroradiological imaging and ophthalmoscopic technologies, and (3) the introduction of postmortem imaging. However, the pathological condition of patients with AHT, particularly that of the diffuse brain swelling type, still remains poorly understood. As a result, no clear treatment strategies for AHT have been developed and no treatment outcomes have been improved to date. The development of new treatment strategies for AHT and the construction of a comprehensive database that supports clinical studies are required in the future. PMID:25797781

  5. Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

    ERIC Educational Resources Information Center

    Okoye, Reko; Arimonu, Maxwell Onyenwe

    2016-01-01

    Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

  6. [Legal and technical issues of formalin disposition in association with autopsy].

    PubMed

    Nakajima, M; Yoshida, K

    2001-07-01

    The Ministry of Public Welfare notified on the disposition of formalin, which was used in the histological examination in association with forensic or pathological autopsy. However, those who concerned on the issue had not known exactly how they dispose formalin. The news on the illegal disposition of formalin from our department drew attention to the legal disposition of formalin. These situations led us to investigate the legal and technical aspects of formalin disposition. We examined the legally-described methods such as oxidation, incineration and activated sludge processes and other methods such as formose, supercritical water oxidation, and wet oxidation processes. From legal point of view, we must process poisonous formaldehyde into non-poisonous products under the control of The Poisonous and Peleterious? Substances Control Law. Additionally, the products are under the control of The Sewage Water Law and Water Pollution Control Law, particularly in terms of Biological Oxygen Demand (BOD). After careful investigation, we tentatively conclude that incineration method is the best at present, though the supercritical oxidation and wet oxidation processes may be better in order to cope with the worldwide movement toward the control of environmental hormones and warm climate. PMID:11605419

  7. Technical Issues Map for the NHI System Interface and Support Systems Area: 2nd Quarter FY07

    SciTech Connect

    Steven R. Sherman

    2007-03-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway in the 2nd quarter of FY07.

  8. 21st Century Educators: Developing and Supporting Great Career and Technical Education Teachers. Special Issues Brief. Revised Edition

    ERIC Educational Resources Information Center

    Jacques, Catherine; Potemski, Amy

    2014-01-01

    This Special Issues Brief from the Center on Great Teachers and Leaders (GTL Center) offers insight into three human capital management policies that are critical for career and technical education (CTE) teachers: certification, performance evaluation, and professional development. CTE teachers are uniquely positioned to improve college and career…

  9. Public Communication of Technical Issues in Today's Changing Visual Language - 12436

    SciTech Connect

    Hermann, Laura

    2012-07-01

    Communication regarding the management of radioactive materials is a well-established challenge. Residents and consumers have suspected for years that companies and governments place short-term economic concerns ahead of health and safety. This skepticism is compounded with increased attention to safety issues at nuclear power plants everywhere after Fukushima. Nonetheless, today's environment presents unexpected opportunities to transform public fear into teachable moments that bring knowledge and facts to discussions on nuclear energy. In the weeks following Japan's crisis, the lack of reliable information on radiation levels saw citizens taking to the streets with dosimeters and Geiger counters in crowd-sourced radiation monitoring efforts. Efforts, based mainly online, represent a growing set of examples of how internet and cell-phone technology are being put to use in emergency situations. The maps, graphs and tables created to meet public interest also exemplify some of the psychological priorities of audiences and present learning tools that can improve future education efforts in non-emergency situations. Industry outreach efforts often consist of technical details and quantitative data that are difficult for lay audiences to interpret. The intense attention to nuclear energy issues since last March has produced a wide array of visual samples. Citizen monitors, news organizations, government agencies and others have displayed quantitative information in innovative ways. Their efforts offer new perspective on what charts, maps and info graphics do - or need to do - to illustrate requirements, record assessments and promote understanding of nuclear-waste issues. Surveying the best examples, nuclear communicators can improve their offerings of easy-to-use, evidence-based visuals to inform stakeholders. Familiar to most communications professionals in the nuclear industry, risk communication is a science-based approach with over three decades of research

  10. Spray forming -- Aluminum: Third annual report (Phase 2). Technical progress -- Summary

    SciTech Connect

    Kozarek, R.L.

    1998-04-20

    Commercial production of aluminum sheet and plate by spray atomization and deposition is a potentially attractive manufacturing alternative to conventional ingot metallurgy/hot-milling and to continuous casting processes because of reduced energy requirements and reduced cost. To realize the full potential of the technology, the Aluminum Company of America (Alcoa), under contract by the US Department of Energy, is investigating currently available state-of-the-art atomization devices to develop nozzle design concepts whose spray characteristics are tailored for continuous sheet production. This third technical progress report will summarize research and development work conducted during the period 1997 October through 1998 March. Included are the latest optimization work on the Alcoa III nozzle, results of spray forming runs with 6111 aluminum alloy and preliminary rolling trials of 6111 deposits.

  11. PFBC HGCU Test Facility. Technical progress report: Third Quarter, CY 1993

    SciTech Connect

    Not Available

    1993-10-01

    This is the sixteenth Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC (pressurized fluidized-bed combustion) Hot Gas Clean Up Test Facility (HGCU). This report covers the period of work completed during the Third Quarter of CY 1993. During this quarter, the Advanced Particle Filter (APF) was operated for a total of 1295 hours. This represents 58% availability during July, August, September, and including June 30 of the previous quarter. The operating dates and times since initial operation are summarized. The APF operating temperatures and differential pressures are provided. Details of the APF runs during this quarter are included in this report.

  12. MHD air heater development technology. Technical progress report, July 1-September 30, 1980

    SciTech Connect

    1980-11-01

    The technology development of the directly-fired high temperature air heater (HTAH) for MHD power plants is described. Progress is reported on the three tasks. The first task is materials selection, evaluation, and development. The objective of this task is to continue development of ceramic materials technology for the directly-fired HTAH. Task two is operability, performance, and materials testing. The objectives of this task are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. The objectives of the full-scale design task are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. (WHK)

  13. Soot formation in synthetic-fuel droplets. First quarterly technical progress report

    SciTech Connect

    England, G.; Kramlich, J.; Payne, R.

    1981-01-01

    The objective of this project is to provide detailed information on methods of minimizing soot formation during synthetic liquid fuel combustion under conditions which minimize fuel nitrogen conversion to nitric oxide. The program consists of two tasks. The purpose of the first task, Fuel Screening Studies, is to investigate the impact of fuel properties on particulate production, to establish the importance of droplet size and examine atomizer effects, and to develop techniques for surrogate fuels productions. In the second task, Flame Studies, the fundamental details of soot formation from synfuel droplet combustion will be investigated in variable slip velocity configurations. This present report describes technical progress during the first three months of the program effort (October-December 1980). During this initial period, attention has focused on the definition of the different experimental efforts and on the design and construction of the required hardware. Aspects of this work are discussed.

  14. Pipeline gas demonstration plant, Phase I. Quarterly technical progress report for September 1980-November 1980

    SciTech Connect

    Eby, R.J.

    1980-12-01

    Work was performed in the following tasks in Phase I of the Pipeline Gas Demonstration Plant Program: Site Evaluation and Selection; Demonstration Plant Environmental Analysis; Feedstock Plans, Licenses, Permits and Easements; Demonstration Plant Definitive Design; Construction Planning; Economic Reassessment; Technical Support; Long Lead Procurement List; and Project Management. The Preliminary Construction Schedule was delivered to the Government on October 3, 1980, constituting an early delivery of the construction schedule called for in the scope of work for Task VI. The major work activity continues to be the effort in Task VI, Demonstration Plant Definitive Design, with two 30% Design Review meetings being held with the Government. Work in Task VII, Construction Planning, was initiated. Work has progressed satisfactorily in the other tasks in support of the Demonstration Plant Program. A Cost Change Proposal was submitted because of an increase in the scope of work and an extension of the schedule for Phase I to 47 months.

  15. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    SciTech Connect

    Not Available

    1980-06-15

    The principal objective of the work is to identify an economically viable alternative to the existing method of meeting the energy requirements of citrus fruit processing that will substantially reduce the overall energy usage of citrus processing plants. The components which will make up the alternative systems include: evaporators, dryers, refrigeration units, heat pumps, heat engines, heat exchangers, thermal storage units, and ancillary components. These components will be used to form the five operational units of the citrus processing plant. These operational units are: evaporation, drying, refrigeration, pasteurizing and canning, and the plant electrical load that consists of operations such as conveying and juice extraction. The five operational units are then interrelated to varying degrees with respect to energy exchange to form different types of alternative systems. The approach, work plan, and progress of technical work are summarized. (MCW)

  16. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    SciTech Connect

    Not Available

    1980-06-15

    The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing method of meeting energy requirements. Progress on the technical work of Phase I is reported. The following are summarized: requirements (energy price projection, atmospheric emission requirements, citrus juice quality constraints, economic evaluations); characterization (basic citrus processing operations, energy consumption and fruit processed vs time, identification and measurement of energy uses, energy balance for a typical citrus juice evaporator); and thermodynamic analysis (heat pump model, thermal evaporator, and co-generation model).

  17. Low cost silicon process development. Phase III: process optimization and evaluation. Third quarterly technical progress report

    SciTech Connect

    Moore, E.; Newman, C.; Messina, L.

    1980-03-01

    The goal of the Low Cost Silicon Process Development project is to determine technical and economic feasibility of a tribromosilane-based process for the production of Solar Cell Grade Silicon. To accomplish this project goal, three principal tasks have been defined: (1) an experimental chemistry task; (2) a mini-plant design and construction task; and (3) a mini-plant operation and evaluation task. The scope of the experimental chemistry task includes optimization of the process with design verification studies at bench scale level. The mini-plant design task is focused on construction of a flexible, cost effective mini-plant. The final task is concerned with the generation of sufficient high quality process data through mini-plant operation to support an accurate assessment of the potential of the process for meeting DOE silicon material quality and cost goals. Progress is reported.

  18. Advanced Coal Conversion Process Demonstration. Technical progress report, July 1, 1993--September 30, 1993

    SciTech Connect

    Not Available

    1994-03-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from July 1, 1993, through September 30, 1993. The ACCP Demonstration Project is a US DOE Clean Coal Technology Project. This project demonstrates an advanced thermal coal drying process coupled with physical cleaning techniques that are designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel registered as the SynCoal{reg_sign} process. The coal is processed through three stages of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After drying, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal.

  19. Characterization of oil and gas reservoir heterogeneity. Technical progress report, July 1, 1992--September 30, 1992

    SciTech Connect

    Sharma, G.D.

    1992-12-01

    The ultimate oojective of this cooperative research project is to characterize Alaskan petroleum reservoirs in terms of their reserves, physical and chemical properties, geologic configuration in relation to lithofacies and structure, and development potential. The project has two tasks: Task 1 is a geological description of the reservoirs including petrophysical properties, i.e., porosity, permeability, permeability variation, formation depth, temperature, and net pay, facies changes and reservoir structures as drawn from cores, well logs, and other geological data. Task 2 is reservoir fluid characterization--determination of physical properties of reservoir fluids including density, viscosity, phase distributions and composition as well as petrogenesis--source rock identification; and the study of asphaltene precipitation for Alaskan crude oils. This report presents a summary of technical progress of the well log analysis of Kuparuk Field, Northslope, Alaska.

  20. MHD Integrated Topping Cycle Project. Seventeenth quarterly technical progress report, August 1, 1991--October 31, 1991

    SciTech Connect

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  1. Quarterly technical progress report, October-December 1982 on Energy Conversion Research and Development Programs

    SciTech Connect

    Not Available

    1983-10-01

    In this quarterly technical progress report, UTSI reports on the continued design work for the low mass flow train superheater. The detailed design of this component continued and the overall arrangement drawing for the superheater and air heater was finalized. The air heater procurement reached the point of contract award, but the actual purchase order award was held up pending receipt of additional funding from the Department of Energy. Testing activity reported includes two additional tests in the LMF1C series, which concludes this test series. Test data are presented, along with preliminary analyses for the combustor, nozzle, diagnostic channel, diffuser, radiant furnace/secondary combustor and Materials Test Module. In addition to the nitrogen oxide test measurements, corrosion and erosion rates for the boiler tube specimens and the materials test module are reported.

  2. Panama coal to methanol project. Phase I. Feasibility Study. Technical progress report

    SciTech Connect

    Not Available

    1983-11-01

    This Technical Progress Report contains the results of the investigations performed for the Panama Coal to Methanol Project: Technical efforts associated with the gasification technology evaluation; evaluation of other related process technologies; results of the venture analyses, including the efforts made for structuring the project; results of the ongoing financial analyses and cost projections, including potential and use applications of methanol in Japan primarily for combustion turbine-combined cycle steam/electric utilization. At this time, and for the next few years, the Panama-based methanol fuel is more expensive than oil. However, when measured in terms of KWH production cost in Japan, the use of methanol fuel in combustion turbine, combined-cycle operations appears to create less expensive electric power than that produced from conventional coal direct fired operations using imported coal. This cost advantage arises from significantly lower capital costs and enhanced performance efficiencies associated with combined cycle power generators as contrasted with conventional coal plants equipped with scrubbers. Environmental and social land-use benefits are also much greater for the methanol fuel plant. The cost of electricity from a methanol-fueled combined cycle plant is also expected to compare favorably in Japan with electrical costs from a future liquefied natural gas fired plant.

  3. A Synopsis of Technical Issues for Monitoring Sediment in Highway and Urban Runoff

    USGS Publications Warehouse

    Bent, Gardner C.; Gray, John R.; Smith, Kirk P.; Glysson, G. Douglas

    2000-01-01

    Accurate and representative sediment data are critical for assessing the potential effects of highway and urban runoff on receiving waters. The U.S. Environmental Protection Agency identified sediment as the most widespread pollutant in the Nation's rivers and streams, affecting aquatic habitat, drinking water treatment processes, and recreational uses of rivers, lakes, and estuaries. Representative sediment data are also necessary for quantifying and interpreting concentrations, loads, and effects of trace elements and organic constituents associated with highway and urban runoff. Many technical issues associated with the collecting, processing, and analyzing of samples must be addressed to produce valid (useful for intended purposes), current, complete, and technically defensible data for local, regional, and national information needs. All aspects of sediment data-collection programs need to be evaluated, and adequate quality-control data must be collected and documented so that the comparability and representativeness of data obtained for highway- and urban-runoff studies may be assessed. Collection of representative samples for the measurement of sediment in highway and urban runoff involves a number of interrelated issues. Temporal and spatial variability in runoff result from a combination of factors, including volume and intensity of precipitation, rate of snowmelt, and features of the drainage basin such as area, slope, infiltration capacity, channel roughness, and storage characteristics. In small drainage basins such as those found in many highway and urban settings, automatic samplers are often the most suitable method for collecting samples of runoff for a variety of reasons. Indirect sediment-measurement methods are also useful as supplementary and(or) surrogate means for monitoring sediment in runoff. All of these methods have limitations in addition to benefits, which must be identified and quantified to produce representative data. Methods for

  4. Hot gas cleanup test facility for gasification and pressurized combustion. Quarterly technical progress report, April 1--June 30, 1992

    SciTech Connect

    Not Available

    1992-12-01

    This quarterly technical progress report summarizes work completed during the Seventh Quarter of the First Budget Period, April 1 through June 30, 1992, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion will include the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source; Hot Gas Cleanup Units to mate to all gas streams. Combustion Gas Turbine; Fuel Cell and associated gas treatment; and Externally Fired Gas Turbine/Water Augmented Gas Turbine. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF).

  5. Hot gas cleanup test facility for gasification and pressurized combustion. Quarterly technical progress report, January 1--March 31, 1992

    SciTech Connect

    Not Available

    1992-12-01

    This quarterly technical progress report summarizes work completed during the Sixth Quarter of the First Budget Period, January 1 through March 31, 1992, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. The major emphasis during this reporting period was expanding the test facility to address system integration issues of hot particulate removal in advanced power generation systems. The conceptual design of the facility was extended to include additional modules for the expansion of the test facility, which is referred to as the Power Systems Development Facility (PSOF). A letter agreement was negotiated between Southern Company Services (SCS) and Foster Wheeler (FW) for the conceptual design of the Advanced Pressurized Fluid-Bed Combustion (APFBC)/Topping Combustor/Gas Turbine System to be added to the facility. The expanded conceptual design also included modifications to the existing conceptual design for the Hot Gas Cleanup Test Facility (HGCTF), facility layout and balance of plant design for the PSOF. Southern Research Institute (SRI) began investigating the sampling requirements for the expanded facility and assisted SCS in contacting Particulate Control Device (PCD) vendors for additional information. SCS also contacted the Electric Power Research Institute (EPRI) and two molten carbonate fuel cell vendors for input on the fuel cell module for the PSDF.

  6. Biochemical removal of HAP precursors from coal. Quarterly technical progress report, 1996

    SciTech Connect

    1996-12-31

    Shake flask tests were completed of microbial pyrite and HAP precursor removal from Rosebud subbituminous coal. Significant amounts of Ni, F, Mn, Cd, Co and Be were removed from this coal. Analyses in connection with leach column tests of Pittsburgh coal were completed and confirmed significant removal of Ni, F, Mn, Cd, Co and As from this coal. Although Hg was not removed from Pittsburgh coal by microbial attack, there was a correlation between HCl leaching of Hg from this coal and the extent of depyritization. Since HgS is soluble in HCl, the results suggest HgS is exposed by chemical and microbial dissolution of coal pyrite. Column tests with cleaned Indiana No. 5 coal are in progress and show significant early dissolution of Ni, Mn, Cd, Co and As. A final shake flask test with Kentucky No. 9 coal was begun. Pittsburgh coal with a low content of fines was shipped to the Idaho National Engineering Laboratory (INEL) in preparation for slurry column tests of HAP precursor removal. Project results were presented at the PETC contractor`s conference held in Pittsburgh. A project progress review meeting was also held with the PETC technical project monitor.

  7. MHD Integrated Topping Cycle Project. Fourteenth quarterly technical progress report, November 1, 1990-- January 31, 1991

    SciTech Connect

    Not Available

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  8. Technical and practical issues for tidal breathing measurements of nasal nitric oxide in children.

    PubMed

    Beydon, Nicole; Chambellan, Arnaud; Alberti, Corinne; de Blic, Jacques; Clément, Annick; Escudier, Estelle; Le Bourgeois, Muriel

    2015-12-01

    To promote early screening of patients with suspected Primary Ciliary Dyskinesia (PCD), nasal nitric oxide (nNO) measurements during tidal breathing (TB) have been developed for children unable to ensure velum closure (VC) during breath hold or expiration against resistance. To investigate technical and practical issues related to TB-nNO methods in children referred for suspected or asserted PCD, we recorded, in a prospective multicenter study, TB-nNO (calculated as the mean of 5 peaks, 10 or 30 sec during tidal breathing) and VC-nNO when available. We studied 142 children (PCD diagnosis asserted in 47, excluded in 39). Nasal NO values were significantly different according to methods, VC-nNO being higher than TB-nNO (TB-nNO 5 peaks higher than mean of 10 or 30 sec). Specificity (90-94%) and sensitivity (86-97%) were similar between TB-nNO and VC-nNO methods. Age was more correlated with VC-nNO than with TB-nNO. TB-nNO could differ between the two nostrils by more than 10% (or 10 ppb when nNO absolute value lower 100 ppb) in 32-43% of the tested children, according to the different tidal breathing values, and was reproducible in the long term but influenced by ambient NO. Despite TB-nNO values being lower than VC-nNO, TB-nNO was found to be as discriminant for PCD, and probably more discriminant in children less than 8 years old, as the VC method. These results were obtained using the chemiluminescence technique which allows an easier assessment of relevant factors such as nasal permeability and ambient NO than the electrochemical technique. PMID:25731630

  9. Colorado School of Mines Low Energy Nuclear Physics Project technical progress report

    SciTech Connect

    Cecil, F.E.

    1990-01-05

    This report summarizes the activity and accomplishments of the Colorado School of Mines Low Energy Nuclear Physics project during the calendar year 1989. Many of the projects which were anticipated in the original grant proposal have been completed. Among these completed projects we include of study of the radiative capture of low energy protons on {sup 6}Li, {sup 7}Li, {sup 9}Be, and {sup 11}B. Preliminary measurements of the branching ratios and yields of these reactions were reported in last year's Technical Progress Report. These measurements are now complete and have been used to extract the respective astrophysical S-factors and the corresponding thermonuclear reactivities. While not complete, progress has been made in some of the other originally proposed studies. Among these include a fairly extensive study of the interaction of low energy deuterons with {sup 6}Li and {sup 7}Li. In the course of this study we have made a solid observation of the Oppenheimer-Phillips effect in the D-{sup 6}Li system. Progress has been made in our study of the radiative capture of alpha particles by deuterons, {sup 6}Li, and {sup 7}Li but considerable work remains in these studies. In our earlier reports we noted the observation of d-d reactions during the bombardment of deuterated targets with energetic beams of protons, alpha particles, and other light-to-medium ions. We believe we now understand this phenomenon and feel it has some fairly significant consequences both for our studies and for those of other researchers. Our susceptibility to mob hysteria led us to invest a significant effort in cold nuclear fusion, both employing a fairly unique accelerator based approach at CSM and as one of the gamma ray diagnosticians on the Princeton Plasma Physics Laboratory's Cold Fusion Task Force.

  10. Deep Vadose Zone Remediation: Technical and Policy Challenges, Opportunities, and Progress in Achieving Cleanup Endpoints

    SciTech Connect

    Wellman, Dawn M.; Freshley, Mark D.; Truex, Michael J.; Lee, Michelle H.

    2013-02-24

    Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches.

  11. [Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion]. Quarterly technical progress report, October 1--December 31, 1993

    SciTech Connect

    Not Available

    1993-12-31

    This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, October 1 through December 31, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: (1) Carbonizer/pressurized circulating fluidized bed gas source; (2) hot gas cleanup units to mate to all gas streams; (3) combustion gas turbine; (4) fuel cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF).

  12. Heterogeneous integration of semiconductor materials: basic issues, current progress, and future prospects

    NASA Astrophysics Data System (ADS)

    Woodall, Jerry M.

    2012-06-01

    The world's dominant IC material, silicon, cannot do everything we want a semiconductor material to do. However, for this discussion, the fact that Si wafers are of high quality, large and cheap is of great interest. This is important for at least two reasons. First, nearly all of the electronic and photonic compound semiconductor devices that comprise the current $20 billion per year market are fabricated on substrates that are either very expensive or non-optimal for the epitaxy required to realize the device or an IC of interest. A second reason is the integration of new functionality to current Si technology. Clearly, if many of the current photonic applications already realized in current compound semiconductor technology could be integrated into Si technology, some of the herculean efforts to continue following Moore's Law (including trying to do it via nanotechnology) could be mitigated. This presentation examines some of the basic materials science issues involved with heterogeneous integration of semiconductor materials. These include those applications in which the active device region requires a high degree of crystal perfection and those that do not. Epitaxy issues at the hetero-interface, heterovalent versus homovalent epigrowth, and dislocation dynamics are presented. Notable historical examples are summarized, followed by examples of current successful approaches including the materials science concepts used to achieve the results. A list is made of some challenges that need to be solved in order to continue making future progress.

  13. International Models of Career-Technical Education. Trends and Issues Alert.

    ERIC Educational Resources Information Center

    Brown, Bettina Lankard

    Increasing globalization has spotlighted a range of international approaches to career and technical education (CTE), including the German dual system, the British National Vocational Qualifications and General National Vocational Qualifications, and Australia's Vocational Education and Training and Technical and Further Education systems. Across…

  14. Progress in Addressing DNFSB Recommendation 2002-1 Issues: Improving Accident Analysis Software Applications

    SciTech Connect

    VINCENT, ANDREW

    2005-04-25

    Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (''Quality Assurance for Safety-Related Software'') identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls to prevent or mitigate potential accidents. Over the last year, DOE has begun several processes and programs as part of the Implementation Plan commitments, and in particular, has made significant progress in addressing several sets of issues particularly important in the application of software for performing hazard and accident analysis. The work discussed here demonstrates that through these actions, Software Quality Assurance (SQA) guidance and software tools are available that can be used to improve resulting safety analysis. Specifically, five of the primary actions corresponding to the commitments made in the Implementation Plan to Recommendation 2002-1 are identified and discussed in this paper. Included are the web-based DOE SQA Knowledge Portal and the Central Registry, guidance and gap analysis reports, electronic bulletin board and discussion forum, and a DOE safety software guide. These SQA products can benefit DOE safety contractors in the development of hazard and accident analysis by precluding inappropriate software applications and utilizing best practices when incorporating software results to safety basis documentation. The improvement actions discussed here mark a beginning to establishing stronger, standard-compliant programs, practices, and processes in SQA among safety software users, managers, and reviewers throughout the DOE Complex. Additional effort is needed, however, particularly in: (1) processes to add new software applications to the DOE Safety Software Toolbox; (2) improving the effectiveness of software issue communication; and (3) promoting a safety software quality assurance culture.

  15. Projects at the Component Development and Integration Facility. Quarterly technical progress report, January 1--March 31, 1993

    SciTech Connect

    Not Available

    1993-09-01

    This quarterly technical progress report presents progress on several different projects at the Component Development and Integration Facility (CDIF) during the second quarter of FY93. The CDIF is a major US Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: MHD Proof-of-Concept Project; Mine Waste Technology Pilot Program; Plasma Furnace Projects for waste destruction; Resource Recovery Project; Sodium Sulfide/Ferrous Sulfate Project; Soil Washing Project for removal of radioactive materials; and Spray Casting Project.

  16. Fischer-Tropsch synthesis in slurry reactor systems. Technical progress report for period ending July 31, 1981

    SciTech Connect

    Satterfield, C.N.; Huff, G.A. Jr.

    1981-01-01

    This is the first technical progress report on this grant, which had an effective date of initiation of March 9, 1981. During this period preliminary experimental results were obtained on the effects of reactant transport across the gas-liquid interface on synthesis gas conversion and product selectivity, utilizing an iron catalyst in a laboratory-scale, well-mixed slurry reactor.

  17. Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

    SciTech Connect

    Bender, W.

    2013-01-01

    Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

  18. A Synopsis of Technical Issues of Concern for Monitoring Trace Elements in Highway and Urban Runoff

    USGS Publications Warehouse

    Breault, Robert F.; Granato, Gregory E.

    2000-01-01

    Trace elements, which are regulated for aquatic life protection, are a primary concern in highway- and urban-runoff studies because stormwater runoff may transport these constituents from the land surface to receiving waters. Many of these trace elements are essential for biological activity and become detrimental only when geologic or anthropogenic sources exceed concentrations beyond ranges typical of the natural environment. The Federal Highway Administration and State Transportation Agencies are concerned about the potential effects of highway runoff on the watershed scale and for the management and protection of watersheds. Transportation agencies need information that is documented as valid, current, and scientifically defensible to support planning and management decisions. There are many technical issues of concern for monitoring trace elements; therefore, trace-element data commonly are considered suspect, and the responsibility to provide data-quality information to support the validity of reported results rests with the data-collection agency. Paved surfaces are fundamentally different physically, hydraulically, and chemically from the natural surfaces typical of most freshwater systems that have been the focus of many traceelement- monitoring studies. Existing scientific conceptions of the behavior of trace elements in the environment are based largely upon research on natural systems, rather than on systems typical of pavement runoff. Additionally, the logistics of stormwater sampling are difficult because of the great uncertainty in the occurrence and magnitude of storm events. Therefore, trace-element monitoring programs may be enhanced if monitoring and sampling programs are automated. Automation would standardize the process and provide a continuous record of the variations in flow and water-quality characteristics. Great care is required to collect and process samples in a manner that will minimize potential contamination or attenuation of trace

  19. Assessing Student Achievement and Progress with Online Examinations: Some Pedagogical and Technical Issues

    ERIC Educational Resources Information Center

    Khare, Anshuman; Lam, Helen

    2008-01-01

    Published papers on the area of online assessment have mainly focused on instructors' assessment of online discussion forums or computer-assisted testing in a highly structured environment with a narrow focus on multiple choice or true-false types of questions. With the exponential growth of online courses and many educational institutions looking…

  20. [Chemical risk in operating rooms and technical progress: the obligations and responsibilities of law].

    PubMed

    Oddo, Antonio

    2013-01-01

    We are going to consider the specific applications of the new legal system and of the most recent body of laws to those work environments of particular risk, such as healthcare facilities and in particular operating rooms. In such environments, volatile chemicals classified as "dangerous" are used with consequent exposure to "chemical risk", both of those persons professionally involved, depending on the type of activity, and of the patients to whom such activities are addressed in the same environment. Once the chemical risk is framed in the existing regulatory system, it must be specifically evaluated the application of the same principle to the particular chemical risk arising from the use of anesthetic agents in the operating room, for example sevoflurane and desflurane, being careful to test wether and how much this risk can be eliminated or reduced to minimum in relation to the new achievements of the technical progress. So, as soon as the quality of "dangerous chemical agent" of the "volatile chemicals" and of the "volatile liquid anesthetic" (sevoflurane and desflurane) as well--which are characterized by a lower degree of toxicity and for this reason are mostly used in current chemical practice, preferable to some anesthetic gases such as nitrous oxide--is legally verified, it is necessary to relate the scientific and technical data which result from the current "state of art" also to the other binding regulations that are imposed for the "prevention and protection from chemical agents", according to the relative Title IX of the TUSL (Unique text for Safety and Health at Work). PMID:24640081

  1. 75 FR 62534 - Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... Energy Regulatory Commission Reliability Monitoring, Enforcement and Compliance Issues; Notice of... reliability monitoring, enforcement and compliance, as announced in the Commission's order issued September 16, 2010 that accepted the North American Electric Reliability Corporation's initial assessment in...

  2. Applicability of existing C3 (command, control and communications) vulnerability and hardness analyses to sentry system issues. Technical report

    SciTech Connect

    Lee, R.C.

    1983-01-13

    This report is a compilation of abstracts resulting from a literature search of reports relevant to Sentry Ballistic missile system C3 vulnerability and hardness. Primary sources consulted were the DOD Nuclear Information Analysis Center (DASIAC) and the Defense Technical Information Center (DTIC). Approximately 175 reports were reviewed and abstracted, including several related to computer programs for estimating nuclear effects on electromagnetic propagation. The reports surveyed were ranked in terms of their importance for Sentry C3 VandH issues.

  3. TECHNICAL ASSISTANCE, TECHNOLOGY TRANSFER, AND DISSEMINATION OF EPA SCIENCE ON INDOOR ENVIRONMENTAL ISSUES

    EPA Science Inventory

    Technical Assistance, technology transfer, and dissemination of EPA science on maintenance of good indoor air quality, reducing exposure to radon, reducing exposure to environmental tobacco smoke, and the environmental management of asthma and asthma trigger reduction. This is a...

  4. PNL Technical Review of Pressurized Thermal Shock Issues Supplement 1: Technical Critique of the NRC Near-Term Screening Criteria

    SciTech Connect

    Pederson, L. T.; Apley, W. J.; Bian, S. H.; Pelto, P. J.; Simonen, E. P.; Simonen, F. A.; Stevens, D. L.

    1983-05-01

    Pacific Northwest Laboratory (PNL) provided a technical critique of the draft report, NRC Staff Evaluation of Pressurized Thermal Shock, dated September 13, 1982. This report provided the basis for the NRC near-term regulatory position on pressurized thermal shock {PTS) and recommended a generic screening criteria for welds in the vessel beltline region. The PNL staff concluded that the screening criteria were adequate to meet the intent of the NRC safety goal and to retain past predictions of vessel reliability. The conclusion was based on selecting the plant-specific nilductility transition reference temperature (RT{sub NDT}) in the conservative manner described within the staff report. Conservative and unconservative factors were mentioned throughout the NRC staff report. The PNL staff has listed these factors together with unknown (may be either conservative or unconservative) factors and estimated, where possible, the range in °F RT{sub NDT}. The unknown factors were so widespread that the PNL staff recommended that specific conservatisms not be reduced until the unknowns are further resolved.

  5. Development of a Coal Quality Expert. Final technical progress report No. 14, [July--September 1993

    SciTech Connect

    Not Available

    1994-01-17

    This is the fourteenth Technical Progress Report, describing work performed under DOE Contract No. DE-FC22-90PC89663, ``Development of a Coal Quality Expert.`` The contract is a Cooperative Agreement between the US Department of Energy, CQ Inc., and ABB Combustion Engineering, Inc. This report covers the period from July 1 through September 30, 1993. Five companies and five host utilities have teamed with CQ Inc. and ABB/CE to perform the work on this project. The work falls under DOE`s Clean Coal Technology Program category of ``Advanced Coal Cleaning.`` The 51-month project will provide the utility industry with a PC expert system to confidently and inexpensively evaluate the potential for coal cleaning, blending, and switching options to reduce emissions while producing lowest cost electricity. Specifically, this project will: (1) Enhance the existing Coal Quality Information System (CQIS) database and Coal Quality Impact Model (CQIM) to allow confident assessment of the effects of cleaning on specific boiler cost and performance; and (2) develop and validate a methodology, Coal Quality Expert (CQE) which allows accurate and detailed predictions of coal quality impacts on total power plant capital cost, operating cost, and performance based upon inputs from inactive bench-scale tests.

  6. Pulsed atmospheric fluidized bed combustion. Technical progress report, July 1991--September 1991

    SciTech Connect

    Not Available

    1991-10-01

    The major accomplishments during this reporting period include completion of Task 1 and progression into Phase II, Task 2 design activities. A brief laboratory-scale test was conducted during this reporting period to confirm heat transfer coefficients for various sections of the Pulsed Atmospheric Fluidized bed Combustion (PAFBC) system. The heat transfer coefficient was determined to be approximately 50 Btu/hr ft{sup 2} {degrees}F inside the eductor and tailpipe of the pulse combustor as thin the fluidized bed. well as for the surfaces immersed within the fluidized bed. Communications with potential host sites for the Phase III field demonstration activities continued during this reporting period. These discussions along with discussions with environmental regulatory personnel in the State of Maryland indicate that the throughput of the field demonstration facility should be increased to greater than 36 million Btu/hr. An 8 in. {times} 8 in. fluidized bed unit would be too small to satisfy this requirement; its projected firing rate is only 33 million Btu/hr. Major effort during this reporting period was devoted to assessing the reasonableness of increasing the size of the field test facility from a technical and cost standpoint.

  7. Assessment of pulverized coal-fired combustor performance. First quarterly technical progress report

    SciTech Connect

    Richter, W.; Clark, W.; Payne, R.

    1981-01-01

    The objective of this program is to provide the engineering tools necessary for an authoritative assessment of the performance of industrial furnaces firing pulverized coal. The program incorporates two experimental tasks and is constructed around an analytical task which will identify and upgrade the family of computer programs required to undertake the performance analysis studies. These analytical tools will be used to predict the effect of parameters such as fuel type and furnace variables on combustor performance, and to identify those properties which have a major impact on thermal performance. The second task uses a combustion reactor to screen the key variables identified and to provide data on the properties of coal particulate matter which affect heat transfer performance. Verification of the engineering analytical approach will be provided by measurements made in a pilot-scale furnace. This present report discusses technical progress during the first three months of the program, and considers the selection of the appropriate analytical tools and preliminary details of the experimental system.

  8. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    SciTech Connect

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  9. MHD air heater development technology. Technical progress report, April 1, 1980-June 30, 1980

    SciTech Connect

    1980-07-01

    Technology development for the directly-fired high temperature air heater (HTAH) for MHD power plants is described. Work is being done under three tasks as described in the following. (1) materials selection, evaluation, and development: The objective of this task is to continue development of ceramic materials technology for the directly-fired HTAH. The scope of the work will include compilation of materials data, materials selection for testing and design studies, materials property determination, liaison with refractory manufacturers and other organizations to encourage development of materials and fabrication technology, establishment of preliminary HTAH material specifications, analyses of test materials, and development of criteria for thermal stress limits for crack-tolerant refractory materials. (2) operability, performance, and materials testing: The objectives of this task are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. (3) full-scale design concepts: The objectives of this task are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. Progress is described. (WHK)

  10. Providing solutions to energy and environmental problems. Quarterly technical progress report, January--March 1995

    SciTech Connect

    Not Available

    1995-05-01

    Brief progress reprots are presented for the following tasks: development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation and product market study; the impact of leachate from clean coal technology waste on the stability of clay liners; injection into coal seams for simultaneous co[sub 2] mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the Koppleman Series C'' process using a batch; test unit with powder river basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid state NMR analysis of naturally and artificially matured kerogens; contained recovery of oily wastes field demonstration with bell lumber and pole; insitu treatment of manufactured gas plant contaminated soils; development and demonstration of a wood-fired. Gas turbine system; solid state NMR analysis of mowry formation shale from different sedimentary basins; and acid-mine drainage prevention, control, and treatment development for the stockett/sand coulee area

  11. Providing solutions to energy and environmental problems. Quarterly technical progress report, October--December 1994

    SciTech Connect

    Not Available

    1995-02-01

    Progress reports are briefly described for the following tasks: Development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation and product market study; the impact of leachate from clean coal technology waste on the stability of clay liners; injecton into coal seams for simultaneous CO[sub 2] mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the Koppleman Series C'' process using a batch; test unit with powder river basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid state NMR analysis of naturally and artificially matured kerogens; contained recovery of oily wastes field demonstration with bell lumber and pole; insitu treatment of manufactured gas plant contaminated soils; development and demonstration of a wood-fired gas turbine system; solid state NMR analysis of Mowry Formation Shale from different sedimentary basins; and acid-mine drainage prevention, control, and treatment development for the stockett/sand coulee area

  12. Jointly sponsored research program quarterly technical progress report, January--March 1994

    SciTech Connect

    Not Available

    1994-08-01

    Progress reports are presented for the following tasks: Development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation, and product market study; impact of leachate from clean coal technology waste on the stability of clay liners; investigation of coprocessing of heavy oil, automobile shredder residue, and coal; injection into coal seams for simultaneous CO{sub 2} mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the Koppelman ``Series C`` Power River Basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid-state NMR analysis and interpretation of naturally and artificially matured kerogens; Crow{trademark} field demonstration with Bell Lumber and Pole; ``B`` series pilot plant tests; and in-situ treatment of manufactured gas plant contaminated soils demonstration program.

  13. The Magnetohydrodynamics Coal-Fired Flow Facility technical progress report, July 1, 1993--September 30, 1993

    SciTech Connect

    Not Available

    1993-12-01

    In this quarterly technical progress report, UTSI reports on a multi-task research contract directed toward developing the technology for an MHD steam combined cycle power plant. During the period two tests were conducted in the DOE Coal Fired FLow Facility. Both of these tests were part of the western coal proof-of-concept (POC) test series. The report describes the performance of the tests and provides some preliminary performance data on particulate removal systems during the tests. The performance of ceramic tubes being tested for high temperature air heater application is described. Performance of advanced diagnostics equipment from both UTSI and MSU is summarized. The results of experiments designed to determine the effects of potassium compounds on combustion are included. Plans for analysis of metal tube specimens previously removed from the test train are discussed. Modeling and analysis of previous test data include a deposition model to predict ash deposition on tubes, mass balance results, automated data screening and chemical analyses and the data base containing these analyses. Laboratory tests on sealing ceramic tubes and corrosion analyses of previously tested tubes are reported.

  14. Heterogeneous kinetics of coal gasification. Quarterly technical progress report, 1 April 1983-30 June 1983

    SciTech Connect

    Calo, J.M.; Ganapathi, R.

    1983-01-01

    In the current quarterly technical progress report we present data and results on transient kinetic studies of the steam-char reaction system for activated coconut and lignite chars. These experiments were conducted in a fashion similar to the previous char-CO/sub 2/ studies, under approximately the same experimental conditions. The two principal product species, H/sub 2/ and CO, were monitored using the automatic mass programming system developed especially for this project. In order to perform the steam-char experiments, the original apparatus was modified by the addition of a steam generation/condensate removal system. The steam-char reaction system, being somewhat more complex than the CO/sub 2/-char reaction system, was modeled with a six-parameter, elementary kinetic scheme. The ''effective'' active site concentrations determined from the steam gasification data were of the same order of magnitude, and behaved in a similar fashion, to those obtained for the CO/sub 2/ gasification studies. The implications of this result are briefly discussed. 21 refs., 23 figs., 2 tabs.

  15. Tidd PFBC Demonstration Project fourth quarterly technical progress report, CY 1992

    SciTech Connect

    Not Available

    1993-01-01

    This is the 23rd technical progress report submitted to the Department of Energy in connection with the cooperative agreement between the DOE and the Ohio Power Company for the Tidd PFBC Demonstration Plant. This report covers the period from October 1, 1992 to December 31, 1992. Major activities during this period involve: (1) The unit was operated for a total of 714 hours (including gas turbine air prewarming). There were seven gas turbine starts, seven bed preheater starts, and seven operating periods with coal fire. The peak gross output of 64 MWH was achieved for the period of 1000 to 1100 hours on November 23, 1992. The longest coal fire was 285 hours beginning at 1211 hours on November 25, 1992. (2) Total gross generation was 24,643, and coal consumption was 11,900 tons. (3) The hot gas clean up system was commissioned. (4) Active end fluidization system to address sparge duct cracking and deformation problem was jointly initiated by ABB carbon, B&W and AEPSC. (5) All testing continued using Plum Run dolomite. This approach was taken as a conservative means to avoid sintering and unit trips which were encountered during the previous two start-ups in September using limestone and (6) monitoring of solid, liquid and gaseous waste streams, as detailed in the operations phase monitoring requirements in the EMP, were performed.

  16. Advanced Coal Conversion Process Demonstration Project. Quarterly technical progress report, January 1, 1994--March 31, 1994

    SciTech Connect

    1996-02-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1994, through March 31, 1994. This project demonstrates an advanced, thermal, coal drying process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal{reg_sign} process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal processing, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. Rosebud SynCoal Partnership`s ACCP Demonstration Facility entered Phase III, Demonstration Operation, in April 1992 and operated in an extended startup mode through August 10, 1993, when the facility became commercial. Rosebud SynCoal Partnership instituted an aggressive program to overcome startup obstacles and now focuses on supplying product coal to customers. Significant accomplishments in the history of the SynCoal{reg_sign} process development are shown in Appendix A.

  17. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, April 1--June 30, 1992

    SciTech Connect

    Brandes, S.D.; Lancet, M.S.; Robbins, G.A.; Winschel, R.A.; Burke, F.P.

    1992-11-01

    This is the eleventh Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Major topics reported are: (1) The results of a study designed to determine the effects of the conditions employed at the Wilsonville slurry preheater vessel on coal conversion is described. (2) Stable carbon isotope ratios were determined and used to source the carbon of three product samples from Period 49 of UOP bench-scale coprocessing Run 37. The results from this coprocessing run agree with the general trends observed in other coprocessing runs that we have studied. (3) Microautoclave tests and chemical analyses were performed to ``calibrate`` the reactivity of the standard coal used for determining donor solvent quality of process oils in this contract. (4) Several aspects of Wilsonville Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) resid conversion kinetics were investigated; results are presented. Error limits associated with calculations of deactivation rate constants previously reported for Runs 258 and 261 are revised and discussed. A new procedure is described that relates the conversions of 850{degrees}F{sup +} , 1050{degrees}F{sup +}, and 850 {times} 1050{degrees}F material. Resid conversions and kinetic constants previously reported for Run 260 were incorrect; corrected data and discussion are found in Appendix I of this report.

  18. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, January 1--March 31, 1992

    SciTech Connect

    Robbins, G.A.; Brandes, S.D.; Winschel, R.A.; Burke, F.P.

    1992-08-01

    This is the tenth Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Process oils from Wilsonville Run 262 were analyzed to provide information on process performance. Run 262 was operated from July 10 through September 30, 1991, in the thermal/catalytic Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) configuration with ash recycle. The feed coal was Black Thunder Mine subbituminous coal. The high/low temperature sequence was used. Each reactor was operated at 50% of the available reactor volume. The interstage separator was in use throughout the run. The second-stage reactor was charged with aged Criterion 324 catalyst (Ni/Mo on 1/16 inch alumina extrudate support). Slurry catalysts and sulfiding agent were fed to the first-stage reactor. Molyvan L is an organometallic compound which contains 8.1% Mo, and is commercially available as an oil-soluble lubricant additive. It was used in Run 262 as a dispersed hydrogenation catalyst precursor, primarily to alleviate deposition problems which plagued past runs with Black Thunder coal. One test was made with little supported catalyst in the second stage. The role of phenolic groups in donor solvent properties was examined. In this study, four samples from direct liquefaction process oils were subjected to O-methylation of the phenolic groups, followed by chemical analysis and solvent quality testing.

  19. PFBC HGCU Test Facility. Fourth quarterly technical progress report, CY 1992

    SciTech Connect

    Not Available

    1993-01-01

    This is the thirteenth Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the period of work completed during the Fourth Quarter of CY 1992. The following are highlights of the activities that occurred during this report period: Initial operation of the Advanced Particle Filter (APF) occurred during this quarter. The following table summarizes the operating dates and times. HGCU ash lockhopper valve plugged with ash. Primary cyclone ash pluggage. Problems with the coal water paste. Unit restarted warm 13 hours later. HGCU expansion joint No. 7 leak in internal ply of bellows. Problems encountered during these initial tests included hot spots on the APP, backup cyclone and instrumentation spools, two breakdowns of the backpulse air compressor, pluggage of the APF hopper and ash removal system, failure (breakage) of 21 filter candles, leakage of the inner ply of one (1) expansion joint bellows, and numerous other smaller problems. These operating problems are discussed in detail in a subsequent section of this report. Following shutdown and equipment inspection in December, design modifications were initiated to correct the problems noted above. The system is scheduled to resume operation in March, 1993.

  20. Jointly sponsored research program. Quarterly technical progress report, October--December 1993

    SciTech Connect

    Deans, H.A.

    1994-05-01

    This is a progress report on work performed by Western Research Institute for the U.S. DOE, Morgantown Energy Technology Center in the period October- December 1993. Tasks addressed include: development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation, and product market study; the impact of leachate from clean coal technology waste on the stability of clay liners; investigation of coprocessing of heavy oil, automobile shredder residue, and coal; injection into coal seams for simultaneous CO{sub 2} mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the koppelman {open_quotes}series c{close_quotes} process using a batch test unit with Powder River Basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid-state NMR analysis and interpretation of naturally and artificially matured kerogens; Crow{trademark} field demonstration with bell lumber and pole; {open_quotes}B{close_quotes} series pilot plant tests; in situ treatment of manufactured gas plant contaminated soils demonstration program.

  1. Rawlins UCG Demonstration Project. Final technical progress report, January 1, 1987--February 9, 1988

    SciTech Connect

    Not Available

    1988-08-03

    Department of Energy Participation in the Rawlins UCG Demonstration Project began officially on November 9, 1987. Even though their financial participation began at this time, they will receive technical information from the start of the project which was on January 1, 1987. The Rawlins UCG Demonstration Project is progressing in Phase I with the majority of the emphasis on facility design, site characterization and the environmental work. The site characterization field work is estimated to be completed by the end of February with the final report completion towards the end of Phase I. The facility design effort is close to the 40% level. It is anticipated that all permits will be applied for in Phase I and most of them will be granted by the end of Phase I. The obtaining of the private financing continues to be a major activity in the project. All of the financing must be in place before the continuation for DOE funding to Phase II will be applied for.

  2. Advanced Coal Conversion Process Demonstration Project. Technical progress report, January 1, 1993--December 31, 1993

    SciTech Connect

    1995-02-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1993, through December 31, 1993. This project demonstrates an advanced, thermal, coal drying process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low- rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal{reg_sign} process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal processing, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. Rosebud SynCoal Partnership`s ACCP Demonstration Facility entered Phase III, Demonstration Operation, in April 1992 and operated in an extended startup mode through August 10, 1993, when the facility became commercial. Rosebud SynCoal Partnership instituted an aggressive program to overcome startup obstacles and now focuses on supplying product coal to customers. Significant accomplishments in the history of the SynCoal{reg_sign} process development are shown in Appendix A.

  3. Liquefaction of coals using ultra-fine particle, unsupported catalysts: In situ generation by rapid expansion of supercritical fluid solutions. Quarterly technical progress report, January 1, 1991--March 31, 1991

    SciTech Connect

    Not Available

    1991-09-01

    The program objective is to generate ultra-fine catalyst particles (20 to 400 {Angstrom} in size) and quantify their potential for improving coal dissolution in the solubilization stage of two-stage catalytic-catalytic liquefaction systems. In the first quarterly report for this program the concept behind our approach was detailed, the structure of the program was presented, key technical issues were identified, preliminary designs were outlined, and technical progress was discussed. All progress made during the second quarter of this program related to experiment design of the proposed supercritical expansion technique for generating ultra-fine, iron compound, catalyst particles. This second quarterly report, therefore, presents descriptions of the final designs for most system components; diagnostic approaches and designs for determining particles size and size distributions, and the composition of the pre-expansion supercritical solution; and the overall technique progress made during this reporting period. 6 refs., 15 figs., 1 tab.

  4. Technical progress report for the Magnetohydrodynamics Coal-Fired Flow Facility, January 1, 1994--March 31, 1994

    SciTech Connect

    Not Available

    1994-06-01

    In this quarterly technical progress report, UTSI reports on the status of a multi-task contract to develop the technology for the steam bottoming portion of a MHD Steam Combined Cycle Power Plant. The report describes the facility maintenance and environmental work completed, status of completing technical reports and certain key administrative actions occurring during the quarter. In view of current year budget reductions and program reductions to closeout the MHD program, downsizing of the UTSI work force took place. No further testing has occurred or is scheduled, and the planned effort for this period was to maintain the DOE CFFF facility in a standby status and to complete test reports.

  5. Technical progress report for the magnetohydrodynamics coal-fired flow facility for the period April 1, 1994--June 30, 1994

    SciTech Connect

    Not Available

    1994-07-01

    In this quarterly technical progress report, UTSI reports on the status of a multitask contract to develop the technology for the steam bottoming portion of a MHD Steam Combined Cycle Power Plant. The report describes the facility maintenance and environmental work completed, status of completing technical reports and certain key administrative actions occurring during the quarter. In view of current year budget reductions and program reductions to closeout the MHD program, downsizing of the UTSI work force took place. No further testing occurred or was scheduled during the quarter, but the DOE CFFF facility was maintained in a standby status.

  6. Infusing Career and Technical Education into High School Reform: Lessons from California. Issue Brief

    ERIC Educational Resources Information Center

    American Youth Policy Forum, 2009

    2009-01-01

    This issue brief is one of a series supported by the Bill & Melinda Gates Foundation that addresses current educational issues informed by relevant research and also based on information gained through an American Youth Policy Forum (AYPF) site visit. This site visit was made to Sacramento, California in November 2008 to study the state's policy…

  7. Assessment Update: Progress, Trends, and Practices in Higher Education. Volume 25, Issue 6, November-December 2013

    ERIC Educational Resources Information Center

    Assessment Update, 2013

    2013-01-01

    This issue of "Assessment Update" presents the following articles: (1) Origins of the WASC Assessment Leadership Academy; (2) Editor's Notes: Parallel Paths to Progress in Assessment in Europe and the United States; (3) The Impact of the First Three Years of the WASC Assessment Leadership Academy; (4) Restructuring the Writing…

  8. Current Trends and Issues in Technical and Vocational Education in Asia and the Pacific.

    ERIC Educational Resources Information Center

    Qureshi, M. A.

    1996-01-01

    In most countries of the Asia-Pacific region, technical and vocational education and training (TVET) are considered essential to economic development. As a result of growing awareness of the need to adapt TVET to meet the rapidly changing national, regional, and global economic requirements, TVET is in a period of transition and reorientation…

  9. The Benefits of Career and Technical Education. Trends and Issues Alert.

    ERIC Educational Resources Information Center

    Brown, Bettina Lankard

    Career and technical education (CTE) can benefit students directly by providing earning advantages before and after graduation. It can benefit them indirectly by increasing engagement, retention, and persistence and by directing them to postsecondary education and pursuit of lifelong learning. CTE programs motivate students to get involved in…

  10. School Improvement in Pennsylvania--Curriculum and Instruction Issues for the Technical Assistant.

    ERIC Educational Resources Information Center

    DeFlaminis, John A.; Nicely, Robert F., Jr.

    The following considerations are of major importance to the persons who act as technical assisters for the Long Range Plan for School Improvement (LRPSI) in Pennsylvania: (1) long-range planning should be viewed as a deliberative and participative process; its steps should not be considered in isolation from each other; (2) comprehensive needs…

  11. Automation and the Workplace. Selected Labor, Education, and Training Issues. A Technical Memorandum.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. Office of Technology Assessment.

    This technical memorandum discusses procedures for evaluating potential employment change associated with automation and outlines associated problems. It also describes the nature and modes of delivery of education, training, and retraining for persons holding or seeking employment in manufacturing industries. An introduction provides a brief…

  12. 78 FR 44104 - Notice of Intent To Issue a Funding Opportunity Announcement; Technical Assistance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-23

    ... implementing combined heat and power (CHP) and renewable energy measures in Federal facilities. This notice... with the planning of CHP and renewable measures. ADDRESSES: Interested agencies can check the DOE... INFORMATION CONTACT: For requests for technical assistance regarding CHP, please contact David Boomsma,...

  13. Work Force Education: Beyond Technical Skills. Trends and Issues Alert No. 1.

    ERIC Educational Resources Information Center

    Imel, Susan

    This brief suggests that during the past 2 decades, the skills needed to succeed in the workplace have changed significantly. Technical skills remain important, but, increasingly, employers recognize another category of skills crucial to a worker's ability to work "smarter, not harder." These "soft,""core,""nontechnical,""essential,""generic," and…

  14. External Technical Support for School Improvement: Critical Issues from the Chilean Experience

    ERIC Educational Resources Information Center

    Osses, Alejandra; Bellei, Cristián; Valenzuela, Juan Pablo

    2015-01-01

    To what extent school improvement processes can be initiated and sustained from the outside has been a relevant question for policy-makers seeking to increase quality in education. Since 2008, the Chilean Government is strongly promoting the use of external technical support (ETS) services to support school improvement processes, as part of the…

  15. Instrumentation of dynamic gas pulse loading system. Technical progress report, first quarter 1992

    SciTech Connect

    Mohaupt, H.

    1992-04-14

    The overall goal of this work is to further develop and field test a system of stimulating oil and gas wells, which increases the effective radius of the well bore so that more oil can flow into it, by recording pressure during the gas generation phase in real time so that fractures can be induced more predictably in the producing formation. Task 1: Complete the laboratory studies currently underway with the prototype model of the instrumentation currently being studied. Task 2: Perform field tests of the model in the Taft/Bakersfield area, utilizing operations closest to the engineers working on the project, and optimize the unit for various conditions encountered there. Task 3: Perform field test of the model in DGPL jobs which are scheduled in the mid-continent area, and optimize the unit for downhole conditions encountered there. Task 4: Analyze and summarize the results achieved during the complete test series, documenting the steps for usage of downhole instrumentation in the field, and compile data specifying use of the technology by others. Task 5: Prepare final report for DOE, and include also a report on the field tests completed. Describe and estimate the probability of the technology being commercialized and in what time span. The project has made substantial technical progress, though we are running about a month behind schedule. Expenditures are in line with the schedule. Increased widespread interest in the use of DGPL stimulation has kept us very busy. The computer modeling and test instrumentation developed under this program is already being applied to commercial operations.

  16. Counting Highly Cited Papers for University Research Assessment: Conceptual and Technical Issues

    PubMed Central

    Rodríguez-Navarro, Alonso

    2012-01-01

    A Kuhnian approach to research assessment requires us to consider that the important scientific breakthroughs that drive scientific progress are infrequent and that the progress of science does not depend on normal research. Consequently, indicators of research performance based on the total number of papers do not accurately measure scientific progress. Similarly, those universities with the best reputations in terms of scientific progress differ widely from other universities in terms of the scale of investments made in research and in the higher concentrations of outstanding scientists present, but less so in terms of the total number of papers or citations. This study argues that indicators for the 1% high-citation tail of the citation distribution reveal the contribution of universities to the progress of science and provide quantifiable justification for the large investments in research made by elite research universities. In this tail, which follows a power low, the number of the less frequent and highly cited important breakthroughs can be predicted from the frequencies of papers in the upper part of the tail. This study quantifies the false impression of excellence produced by multinational papers, and by other types of papers that do not contribute to the progress of science. Many of these papers are concentrated in and dominate lists of highly cited papers, especially in lower-ranked universities. The h-index obscures the differences between higher- and lower-ranked universities because the proportion of h-core papers in the 1% high-citation tail is not proportional to the value of the h-index. PMID:23071759

  17. Technical Issues Associated With the Use of Intermediate Ethanol Blends (>E10) in the U.S. Legacy Fleet

    SciTech Connect

    Rich, Bechtold; Thomas, John F; Huff, Shean P; Szybist, James P; West, Brian H; Theiss, Timothy J; Timbario, Tom; Goodman, Marc

    2007-08-01

    The Oak Ridge National Laboratory (ORNL) supports the U.S. Department of Energy (DOE) in assessing the impact of using intermediate ethanol blends (E10 to E30) in the legacy fleet of vehicles in the U.S. fleet. The purpose of this report is to: (1) identify the issues associated with intermediate ethanol blends with an emphasis on the end-use or vehicle impacts of increased ethanol levels; (2) assess the likely severity of the issues and whether they will become more severe with higher ethanol blend levels, or identify where the issue is most severe; (3) identify where gaps in knowledge exist and what might be required to fill those knowledge gaps; and (4) compile a current and complete bibliography of key references on intermediate ethanol blends. This effort is chiefly a critical review and assessment of available studies. Subject matter experts (authors and selected expert contacts) were consulted to help with interpretation and assessment. The scope of this report is limited to technical issues. Additional issues associated with consumer, vehicle manufacturer, and regulatory acceptance of ethanol blends greater than E10 are not considered. The key findings from this study are given.

  18. Green River formation water flood demonstration project, Uinta Basin, Utah. Quarterly technical progress report, April 1, 1995--June 30, 1995

    SciTech Connect

    Lomax, J.D.; Nielson, D.L.; Deo, M.D.

    1995-09-01

    The objective of the project was to understand the water flood mechanisms underway in Monument Butte unit water flood and apply the technology, if possible to the Travis and the Boundary units. The purpose of the project was also to transfer the water flood technology to nearby units/fields/reservoirs. Technical progress is briefly described for the Monument Butte Unit, Travis Unit, and Boundary Unit.

  19. The Clearlake Hot Dry Rock geothermal project: Institutional policies, administrative issues, and technical tasks

    SciTech Connect

    Burns, K.L.

    1991-01-01

    The Clearlake Project is a three-party collaboration between the California Energy Commission, City of Clearlake, and Los Alamos National Laboratory. It aims to develop a deep hot, dry geothermal resource under the city. The project is funded by the Commission, and administered by the City. Technical operations are conducted by Laboratory staff and resources seconded from the Hot Dry Rock program. In addition to the normal geothermal exploration problems of predicting geological and geophysical properties of the subsurface, there are uncertainties as to what further material and environmental parameters are relevant, and how they might be measured. In addition to technical factors, policy objectives are an influence in choosing the most appropriate development scenario. 11 refs., 4 figs.

  20. Review of Technical Issues Related to Predicting Isotopic Compositions and Source Terms for High-Burnup LWR Fuel

    SciTech Connect

    Gauld, I. C.; Parks, C. V.

    2000-12-11

    This report has been prepared to review the technical issues important to the prediction of isotopic compositions and source terms for high-burnup, light-water-reactor (LWR) fuel as utilized in the licensing of spent fuel transport and storage systems. The current trend towards higher initial 235U enrichments, more complex assembly designs, and more efficient fuel management schemes has resulted in higher spent fuel burnups than seen in the past. This trend has led to a situation where high-burnup assemblies from operating LWRs now extend beyond the area where available experimental data can be used to validate the computational methods employed to calculate spent fuel inventories and source terms. This report provides a brief review of currently available validation data, including isotopic assays, decay heat measurements, and shielded dose-rate measurements. Potential new sources of experimental data available in the near term are identified. A review of the background issues important to isotopic predictions and some of the perceived technical challenges that high-burnup fuel presents to the current computational methods are discussed. Based on the review, the phenomena that need to be investigated further and the technical issues that require resolution are presented. The methods and data development that may be required to address the possible shortcomings of physics and depletion methods in the high-burnup and high-enrichment regime are also discussed. Finally, a sensitivity analysis methodology is presented. This methodology is currently being investigated at the Oak Ridge National Laboratory as a computational tool to better understand the changing relative significance of the underlying nuclear data in the different enrichment and burnup regimes and to identify the processes that are dominant in the high-burnup regime. The potential application of the sensitivity analysis methodology to help establish a range of applicability for experimental

  1. OTEC support services. Quarterly technical progress report No. 8, February 15-May 14, 1980

    SciTech Connect

    Lipari, M. V.

    1980-05-01

    Technical engineering and management support services provided by the VSE Corporation for the Ocean Thermal Energy Conversion Program of the Ocean Systems Branch, Division of Central Solar Technology are reported. Tasks include: (1) survey, analysis, evaluation, and recommendation concerning program performance; (2) program technical monitoring; (3) development and implementation of methodology to identify and evaluate program alternatives; (4) technical assessments; (5) OTEC system integration; (6) environment and siting considerations; and (7) transmission subsystem considerations. (WHK)

  2. Can the technical issues related to risk assessment of transgenic arthropods be solved?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The recent progress that has been made in the development of transgenic technologies for non-drosophilid insects now leads to discussions about both how best to use this technology and the types and magnitudes of risk that are arise from the use of transgenic non-drosophilid insects. We discuss the...

  3. Postsecondary Career/Technical Education: Changes in the Number of Offering Institutions and Awarded Credentials from 1997 to 2006. Issue Brief. NCES 2008-001

    ERIC Educational Resources Information Center

    Clery, Sue

    2008-01-01

    This Issue Brief focuses on the subbaccalaureate sector of career-related credential programs, corresponding to the definition of career/technical education (CTE) as "organized educational activities that provide technical skill proficiency, an industry-recognized credential, a certificate, or an associate degree." The report examines changes…

  4. Analysis of concentrating PV-T systems for the commercial/industrial sector. Volume III. Technical issues and design guidance

    SciTech Connect

    Schwinkendorf, W.E.

    1984-09-01

    This report provide appropriate guidance for addressing the major technical issues associated with the design and installation of a photovoltaic-thermal (PV-T) system. Nomographs are presented for developing preliminary sizing and costing, and issues associated with specific components and the overall design of the electrical and mechanical system are discussed. SAND82-7157/2 presents a review of current PV-T technology and operating systems and a study of potential PV-T applications. Detailed PV-T system designs for three selected applications and the results of a trade-off study for these applications are presented in SAND82-7157/4. A summary of the major results of this entire study and conclusions concerning PV-T systems and applications is presented in SAND82-7157/1.

  5. Evaluation of station blackout accidents at nuclear power plants: Technical findings related to unresolved safety issue A-44: Final report

    SciTech Connect

    Not Available

    1988-06-01

    ''Station Blackout,'' which is the complete loss of alternating current (AC) electrical power in a nuclear power plant, has been designated as Unresolved Safety Issue A-44. Because many safety systems required for reactor core decay heat removal and containment heat removal depend on AC power, the consequences of a station blackout could be severe. This report documents the findings of technical studies performed as part of the program to resolve this issue. The important factors analyzed include: the fequency of loss of offsite power; the probability that emergency or onsite AC power supplies would be unavailable; the capability and reliability of decay heat removal systems independent of AC power; and the likelihood that offsite power would be restored before systems that cannot operate for extended periods without AC power fail, thus resulting in core damage. This report also addresses effects of different designs, locations, and operational features on the estimated frequency of core damage resulting from station blackout events.

  6. Learning Progressions: Tools for Assessment and Instruction for All Learners. Technical Report #1307

    ERIC Educational Resources Information Center

    Sáez, Leilani; Lai, Cheng-Fei; Tindal, Gerald

    2013-01-01

    Conceptually, learning progressions hold promise for improving assessment and instruction by precisely outlining what students know and don't know at particular stages of knowledge and skill development. Based upon a synthesis of the literature, a rationale for the use of learning progressions maps to clarify how learning progresses in…

  7. Technical issues in the large-scale hydrothermal liquefaction of microalgal biomass to biocrude.

    PubMed

    Lee, Andrew; Lewis, David; Kalaitzidis, Theo; Ashman, Peter

    2016-04-01

    Much of the current knowledge on the hydrothermic liquefaction of biomass to biocrude is on the basis of laboratory benchtop findings, and the step up to industrial scale reactors will require a range of information that is currently either unavailable or insufficient. This work highlights a number of these issues such as the heat of reaction, process heat recovery, optimal reaction time and waste product treatment. Effects of these knowledge gaps on the reactor design, process economics, and impacts on the environment are discussed. Although technologies do exist to deal with some of these issues, their applications are often limited by economic considerations and further studies are required. PMID:26874260

  8. Vocational-Technical Education Consortium of States. Second Progress and Information Report.

    ERIC Educational Resources Information Center

    Hirst, Ben A., Jr.

    The report is designed to provide the reader with a basic understanding of the processes and procedures used to develop catalogs of performance objectives, criterion-referenced measures, and performance guides for learners in vocational-technical education. It reports on the efforts of the Vocational-Technical Education Consortium of States…

  9. THE DEVELOPMENT OF ACHIEVEMENT MEASURES FOR TRADE AND TECHNICAL EDUCATION. PROGRESS REPORT NUMBER FOUR.

    ERIC Educational Resources Information Center

    BALDWIN, THOMAS S.

    DURING THE FIRST YEAR OF THE PROJECT, TO DISCOVER MORE ADEQUATE WAYS OF MEASURING IMPORTANT TACTILE-KINESTHETIC MODALITIES, APPROXIMATELY 40 INSTRUCTORS WITHIN THE NORTH CAROLINA DEPARTMENT OF COMMUNITY COLLEGES AND TECHNICAL INSTITUTES, WORKING WITH PROJECT STAFF MEMBERS, COMPLETED A CURRICULUM ANALYSIS FOR THE TECHNICAL OR TRADE SPECIALITY IN…

  10. A Practical Demonstration Project in Teaching Technical Mathematics; Final Progress Report.

    ERIC Educational Resources Information Center

    McHale, Thomas J.; Witzke, Paul T.

    The primary purposes of this developmental and demonstration project were to reduce the number of dropouts and failures and to increase the amount of learning in the technical mathematics core courses. In June 1965 a decision was made to pilot test locally developed programed units in technical mathematics. After the identification of the desired…

  11. Identification of Issues in Adult Basic Education. Technical Report No. 1.

    ERIC Educational Resources Information Center

    Russ-Eft, Darlene F.; And Others

    This report summarizes the major literature dealing with the following major issues in adult basic education (ABE): target and demand populations (size, characteristics, and subgroups of the ABE population and the decline in participation); services provided (the purpose of the Adult Education Act, objectives and goals of ABE, problems of…

  12. Research and Design Issues Concerning the Development of Educational Software for Children. Technical Report No. 14.

    ERIC Educational Resources Information Center

    Char, Cynthia

    Several research and design issues to be considered when creating educational software were identified by a field test evaluation of three types of innovative software created at Bank Street College: (1) Probe, software for measuring and graphing temperature data; (2) Rescue Mission, a navigation game that illustrates the computer's use for…

  13. Student Outcomes and Performance Standards: Issues and Challenges for Community and Technical Colleges.

    ERIC Educational Resources Information Center

    Nolte, Walter H.

    During the last few years, there has been a general emphasis in higher education on quality issues and the use of outcomes measures to assess institutional effectiveness. The quality emphasis in education suggests that previously defined performance standards are met through a review of outcomes assessment. This emphasis on outcomes measures…

  14. The Future of Humanities Education at Community, Technical, and Junior Colleges. AACJC Issues Series No. 5.

    ERIC Educational Resources Information Center

    Eisenberg, Diane U., Ed.; Gollattscheck, James F., Ed.

    In 1985, the American Association of Community and Junior Colleges (AACJC) called together a group of two-year college leaders with a strong commitment to the humanities to explore issues and formulate a humanities policy statement for the AACJC. This monograph provides the resulting policy statement, as well as papers developed to stimulate…

  15. A Study of Current Trends and Issues Related to Technical/Engineering Design Graphics.

    ERIC Educational Resources Information Center

    Clark, Aaron C.; Scales Alice

    2000-01-01

    Presents results from a survey of engineering design graphics educators who responded to questions related to current trends and issues in the profession of graphics education. Concludes that there is a clear trend in institutions towards the teaching of constraint-based modeling and computer-aided manufacturing. (Author/YDS)

  16. Technical Note: Some Issues Related to the Selection of Polymers for Aerospace Oxygen Systems

    NASA Technical Reports Server (NTRS)

    Hirsch, David; Beeson, Harold

    2004-01-01

    Materials intended for use in aerospace oxygen systems are commonly screened for oxygen compatibility following NASA STD 6001. This standard allows qualification of materials based on results provided by only one test method. Potential issues related to this practice are reviewed and recommendations are proposed that would lead to improved aerospace oxygen systems safety.

  17. Intelligent Tutoring Systems: Exploring Issues in Learning and Teaching Writing. CECE Technical Report No. 3.

    ERIC Educational Resources Information Center

    Neuwirth, Christine M.

    This paper argues that Intelligent Tutoring Systems (ITS) offer the potential for advancing existing techniques for computer assisted instruction and deepening the understanding of issues in the learning and teaching of writing. The paper: (1) outlines the goals and significance of research in ITS, emphasizing their value in formulating knowledge…

  18. Atmospheric Reanalyses-Recent Progress and Prospects for the Future. A Report from a Technical Workshop, April 2010. Volume 29

    NASA Technical Reports Server (NTRS)

    Rienecker, Michele M.; Dee, Dick; Woollen, Jack; Compo, Gilbert P.; Onogi, Kazutoshi; Gelaro, Ron; Bosilovich, Michael G.; daSilva, Arlindo; Pawson, Steven; Schubert, Siegfried; Suarez, Max; Barker, Dale; Kamahori, Hirotaka; Kistler, Robert; Saha, Suranjana

    2012-01-01

    In April 2010, developers representing each of the major reanalysis centers met at Goddard Space Flight Center to discuss technical issues - system advances and lessons learned - associated with recent and ongoing atmospheric reanalyses and plans for the future. The meeting included overviews of each center s development efforts, a discussion of the issues in observations, models and data assimilation, and, finally, identification of priorities for future directions and potential areas of collaboration. This report summarizes the deliberations and recommendations from the meeting as well as some advances since the workshop.

  19. Advanced thermally stable jet fuels. Technical progress report, April 1994--June 1994

    SciTech Connect

    Schobert, H.H.; Eser, S.; Song, C.

    1994-07-01

    Research continued on coal-based, thermally stable, jet fuels. Significant progress has been made on the detection of polycyclic aromatic hydrocarbons present in highly stressed fuels, using high-performance liquid chromatography (HPLC) with diode-array detection. Gas chromatography is not able to detect compounds with {>=}6 fused aromatic rings, but such compounds can be identified using the HPLC method. The concentration of such compounds is low in comparison to aromatics of 1-3 rings, but the role of the large compounds in the formation of solid deposits may be crucial in determining the thermal stability of a fuel. The unusual properties of fluid fuels in the near-critical region appear to have significant effects on their thermal decomposition reactions. This issue has been investigated in the present reporting period using n-tetradecane as a model compound for fuel decomposition. Temperature-programmed retention indices are very useful for gas chromatographic and gas chromatography/mass spectrometric analysis of coal and petroleum derived jet fuels. We have demonstrated this in the identification of components in two JP-8 fuels and their liquid chromatographic fractions. The role of activated carbon surfaces as catalysts in the thermal stressing of jet fuel was investigated using n-dodecane and n-octane as model compounds. In some cases the reactions were spiked with addition of 5% decalin to test the ability of the carbon to catalyze the transformation of decalin to naphthalene. We have previously shown that benzyl alcohol and 1,4-benzenedimethanol are effective stabilizers at temperatures {>=}400{degrees}C for jet fuels and the model compound dodecane. The addition of ethanol to hydrocarbon/benzyl alcohol mixtures has a significant effect on the thermal stabilization of jet fuels above 400{degrees}C. Ethanol appears to function by reducing the benzaldehyde formed during the degradation of the benzyl alcohol. This reduction regenerates the benzyl alcohol.

  20. Advanced Gas Turbine Systems Research, Technical Quarterly Progress Report. October 1, 1998--December 31, 1998

    SciTech Connect

    1999-01-19

    Major accomplishments during this reporting period by the Advanced Gas Turbine Systems Research (AGTSR) are: AGTSR submitted FY99 program continuation request to DOE-FETC for $4M; AGTSR submitted program and workshop Formation to the Collaborative Advanced Gas Turbine (CAGT) initiative; AGTSR distributed research accomplishment summaries to DOE-FETC in the areas of combustion, aero-heat transfer, and materials; AGTSR reviewed and cleared research papers with the IRB from Arizona State, Cornell, Wisconsin, Minnesota, Pittsburgh, Clemson, Texas and Georgia Tech; AGTSR prepared background material for DOE-FETC on three technology workshops for distribution at the DOE-ATS conference in Washington, DC; AGTSR coordinated two recommendations for reputable firms to conduct an economic impact analysis in support of new DOE gas turbine initiatives; AGTSR released letters announcing the short-list winners/non-winners from the 98RFP solicitation AGTSR updated fact sheet for 1999 and announced four upcoming workshops via the SCIES web page AGTSR distributed formation to EPRI on research successes, active university projects, and workshop offerings in 1999 AGTSR continued to conduct telephone debriefings to non-winning PI's born the 98RFP solicitation AGTSR distributed completed quarterly progress report assessments to the IRB experts in the various technology areas AGTSR provided Formation to GE-Evandale on the active combustion control research at Georgia Tech AGTSR provided information to AlliedSignal and Wright-Pat Air Force Base on Connecticut's latest short-listed proposal pertaining to NDE of thermal barrier coatings AGTSR submitted final technical reports from Georgia Tech - one on coatings and the other on active combustion control - to the HU3 for review and evaluation AGTSR coordinated the format, presentation and review of 28 university research posters for the ATS Annual Review Meeting in November, 1998 AGTSR published a research summary paper at the ATS Annual

  1. Hydrogen production by supercritical water gasification of biomass. Phase 1 -- Technical and business feasibility study, technical progress report

    SciTech Connect

    1997-12-01

    The nine-month Phase 1 feasibility study was directed toward the application of supercritical water gasification (SCWG) for the economical production and end use of hydrogen from renewable energy sources such as sewage sludge, pulp waste, agricultural wastes, and ultimately the combustible portion of municipal solid waste. Unique in comparison to other gasifier systems, the properties of supercritical water (SCW) are ideal for processing biowastes with high moisture content or contain toxic or hazardous contaminants. During Phase I, an end-to-end SCWG system was evaluated. A range of process options was initially considered for each of the key subsystems. This was followed by tests of sewage sludge feed preparation, pumping and gasification in the SCW pilot plant facility. Based on the initial process review and successful pilot-scale testing, engineering evaluations were performed that defined a baseline system for the production, storage and end use of hydrogen. The results compare favorably with alternative biomass gasifiers currently being developed. The results were then discussed with regional wastewater treatment facility operators to gain their perspective on the proposed commercial SCWG systems and to help define the potential market. Finally, the technical and business plans were developed based on perceived market needs and the projected capital and operating costs of SCWG units. The result is a three-year plan for further development, culminating in a follow-on demonstration test of a 5 MT/day system at a local wastewater treatment plant.

  2. Technical issues in the conduct of large space platform experiments in plasma physics and geoplasma sciences

    NASA Technical Reports Server (NTRS)

    Szuszczewicz, Edward P.

    1986-01-01

    Large, permanently-manned space platforms can provide exciting opportunities for discoveries in basic plasma and geoplasma sciences. The potential for these discoveries will depend very critically on the properties of the platform, its subsystems, and their abilities to fulfill a spectrum of scientific requirements. With this in mind, the planning of space station research initiatives and the development of attendant platform engineering should allow for the identification of critical science and technology issues that must be clarified far in advance of space station program implementation. An attempt is made to contribute to that process, with a perspective that looks to the development of the space station as a permanently-manned Spaceborne Ionospheric Weather Station. The development of this concept requires a synergism of science and technology which leads to several critical design issues. To explore the identification of these issues, the development of the concept of an Ionospheric Weather Station will necessarily touch upon a number of diverse areas. These areas are discussed.

  3. Final Technical Progress Report Long term risk from actinides in the environment: Modes of mobility

    SciTech Connect

    Thomas B. Kirchner

    2002-03-22

    The key source of uncertainty in assessing actinide mobility is the relative importance of transport by: (1) wind erosion, (2) water erosion, and (3) vertical migration. Each of these three processes depends on several environmental factors and they compete with one another. A scientific assessment of the long-term risks associated with actinides in surface soils depends on better quantifying each of these three modes of mobility. The objective from our EMSP study was to quantify the mobility of soil actinides by wind erosion, water erosion, and vertical migration at three semiarid sites where actinide mobility is a key technical, social and legal issue. This EMSP project was the first to evaluate all three factors at a site. The approach has been to investigate both short- and long-term issues based on field and lab studies and model comparisons. Our results demonstrate the importance of incorporating threshold responses into a modeling framework that accounts for environmental factors and natural disturbances that trigger large changes in actinide mobility. The study measured erosional losses of sediment and fallout cesium (an actinide analogue) from field plots located near WIPP in 1998. The results highlight the large effect of burning as a disturbance on contaminant transport and mobility via runoff and erosion. The results show that runoff, erosion, and actinide transport are (1) strongly site specific-differences in radionuclide transport between WIPP and Rocky Flats differed by a factor of twelve because of soil and vegetation differences, and (2) are strongly impacted by disturbances such as fire, which can increase runoff, erosion, and actinide transport by more than an order of magnitude. In addition, a laboratory experiment using soil columns was conducted to investigate the vertical transport of contaminants in sandy soils. Nine columns of soil collected from the vicinity of the WIPP site were prepared. The column consisted of a piece of PVC pipe 20 cm

  4. Progress or Change: Issues in Educating the Emotionally Disturbed. Volume 1: Identification and Program Planning.

    ERIC Educational Resources Information Center

    Noel, Margaret M., Ed.; Haring, Norris G., Ed.

    Seven papers focus on issues in identification and educational program planning for children with emotional disturbances. "Social Policy Issues in Special Education and Related Services for Emotionally Disturbed Children and Youth" (J. Kauffman), touches on problems with the federal definition of and terminology about the emotionally disturbed and…

  5. The New Mexico Association of Community, Junior and Technical Colleges Position Paper on the Important Issues Facing New Mexico's Two-Year Colleges.

    ERIC Educational Resources Information Center

    New Mexico Association of Community, Junior and Technical Colleges.

    The recommendations contained in this report represent the positions of the New Mexico Association of Community, Junior and Technical Colleges concerning important issues facing the state's two-year institutions. In each of 12 areas, a discussion of key issues is followed by a series of recommendations. These areas are: (1) the continuation of low…

  6. Proceedings of the technical review on advances in geothermal reservoir technology---Research in progress

    SciTech Connect

    Lippmann, M.J.

    1988-09-01

    This proceedings contains 20 technical papers and abstracts describing most of the research activities funded by the Department of Energy (DOE's) Geothermal Reservoir Technology Program, which is under the management of Marshall Reed. The meeting was organized in response to several requests made by geothermal industry representatives who wanted to learn more about technical details of the projects supported by the DOE program. Also, this gives them an opportunity to personally discuss research topics with colleagues in the national laboratories and universities.

  7. Progression in Learning about "The Nature of Science": Issues of Conceptualisation and Methodology.

    ERIC Educational Resources Information Center

    Leach, John; And Others

    Recently, it was proposed that a curricular aim of science education should be to engender an understanding of the nature of the scientific enterprise among students, as well as a knowledge of the technical contents of science. Seven diagnostic instruments were designed and administered to students (between the ages of 9 and 16) in an effort to…

  8. Optimization of the convection volume in online post-dilution haemodiafiltration: practical and technical issues

    PubMed Central

    Chapdelaine, Isabelle; de Roij van Zuijdewijn, Camiel L.M.; Mostovaya, Ira M.; Lévesque, Renée; Davenport, Andrew; Blankestijn, Peter J.; Wanner, Christoph; Nubé, Menso J.; Grooteman, Muriel P.C.

    2015-01-01

    In post-dilution online haemodiafiltration (ol-HDF), a relationship has been demonstrated between the magnitude of the convection volume and survival. However, to achieve high convection volumes (>22 L per session) detailed notion of its determining factors is highly desirable. This manuscript summarizes practical problems and pitfalls that were encountered during the quest for high convection volumes. Specifically, it addresses issues such as type of vascular access, needles, blood flow rate, recirculation, filtration fraction, anticoagulation and dialysers. Finally, five of the main HDF systems in Europe are briefly described as far as HDF prescription and optimization of the convection volume is concerned. PMID:25815176

  9. Market for water rights in Chile: Major issues. World bank technical paper

    SciTech Connect

    Brehm, M.R.; Quiroz, J.

    1995-09-01

    Many economists advocate the use of tradable water rights as the most efficient system for allocating scarce water resources among alternative economic uses. The paper reviews the major issues and controversies that have surrounded the practical implementation of this system in Chile. The paper contends that the system in Chile has worked reasonably well although some ammendments may be needed. Among other things, a more precise definition of non-consumptive rights is called for and transaction costs arising from incomplete legalization of water titles, lack of infrastructure, and free rider problems need to be reduced. However, fine tuning of the system, rather than drastic reform, seems the most advisable policy recommendation.

  10. Liquid-phase methanol process development unit: installation, operation, and support studies. Technical progress report No. 2, January 1-March 31, 1982

    SciTech Connect

    Holley, E.P.; Klosek, J.; Spector, I.C.; Mednick, R.L.

    1982-04-20

    Approval was obtained for the unified design concept, advanced schedule for relocation of the LPM pilot plant, and advanced procurement of long lead delivery equipment items. The LaPorte LPMeOH PDU Process Flowsheet was developed further and the Engineering Flowsheet evolved to the Revision OA preliminary issue. Eight cases of point-by-point heat and mass balances were released. Process equipment specifications were issued for 30 of the 32 equipment items. Mechanical specifications were issued for 16 equipment items. Quotations were received for the 2 long lead delivery items, the Feed/Recycle engineeeringompressor and the Slurry Circulation Pumps, technical evaluations of these bids are underway. Semi-final equipment arrangement and plot plan drawings were prepared. The Preliminary Hazards Review was conducted and the subsequent Design Hazards Review was initiated. Progress was made on the specification of the Data Acquisition System. APCI established the priority for compositions of new methanol powder catalysts to be prepared. Construction of the APCI Gas Phase Screening Reactor and Stirred Autoclave Reactor continued on schedule. Progress was made in evaluating the potential modification of the Deckwer liquid phase Fisher-Tropsch model to describe LPMeOH performance. In the CSI laboratories, a 550-hour liquid-fluidized run was completed successfully in the Lab PDU. Preliminary results indicate that the new catalyst tested is more attrition resistant than any prior liquid-fluidized catalyst candidate. Testing of in-situ catalyst reduction procedures continued in the Stirred Autoclave Reactor with successful results which led CSI to file a Record of Invention form for a potential invention covering this process. Specifications and quotations for major equipment items in the CSI liquid-entrained PDU were completed and received.

  11. Proceedings of the Hydrokinetic and Wave Energy Technologies Technical and Environmental Issues Workshop

    SciTech Connect

    2006-03-01

    Renewable energy technologies offer the promise of non-polluting alternatives to fossil and nuclear-fueled power plants to meet growing demand for electrical energy. Two emerging categories of renewable energy technologies, hydrokinetic and wave energy conversion devices, offer ways to tap the energy of moving water without impoundment (dams) or diversion required by many conventional hydroelectric facilities. These technologies include devices designed for deployment in natural streams, tidal estuaries, ocean currents, and constructed waterways, as well as devices designed to capture the energy of ocean waves. On October 26-28, 2005, 54 representatives from government, non-governmental organizations, and private business met to (1) identify the varieties of hydrokinetic energy and wave technology devices, their stages of development, and the projected cost to bring each to market; (2) identify where these technologies can best operate; (3) identify the potential environmental issues associated with these technologies and possible mitigation measures; (4) develop a list of research needs and/or practical solutions to address unresolved environmental issues. These workshop proceedings include detailed summaries of the 24 presentations made and the discussions that followed.

  12. Technical support for the Ukrainian State Committee for Nuclear Radiation Safety on specific waste issues

    SciTech Connect

    Little, C.A.

    1995-07-01

    The government of Ukraine, a now-independent former member of the Soviet Union, has asked the United States to assist its State Committee for Nuclear and Radiation Safety (SCNRS) in improving its regulatory control in technical fields for which it has responsibility. The US Nuclear Regulatory Commission (NRC) is providing this assistance in several areas, including management of radioactive waste and spent fuel. Radioactive wastes resulting from nuclear power plant operation, maintenance, and decommissioning must be stored and ultimately disposed of appropriately. In addition, radioactive residue from radioisotopes used in various industrial and medical applications must be managed. The objective of this program is to provide the Ukrainian SCNRS with the information it needs to establish regulatory control over uranium mining and milling activities in the Zheltye Vody (Yellow Waters) area and radioactive waste disposal in the Pripyat (Chernobyl) area among others. The author of this report, head of the Environmental Technology Section, Health Sciences Research Division of Oak Ridge National Laboratory, accompanied NRC staff to Ukraine to meet with SCNRS staff and visit sites in question. The report highlights problems at the sites visited and recommends license conditions that SCNRS can require to enhance safety of handling mining and milling wastes. The author`s responsibility was specifically for the visit to Zheltye Vody and the mining and milling waste sites associated with that facility. An itinerary for the Zheltye Vody portion of the trip is included as Appendix A.

  13. Synchronized Nasal Intermittent Positive Pressure Ventilation of the Newborn: Technical Issues and Clinical Results.

    PubMed

    Moretti, Corrado; Gizzi, Camilla; Montecchia, Francesco; Barbàra, Caterina Silvia; Midulla, Fabio; Sanchez-Luna, Manuel; Papoff, Paola

    2016-01-01

    Although mechanical ventilation via an endotracheal tube has undoubtedly led to improvement in neonatal survival in the last 40 years, the prolonged use of this technique may predispose the infant to development of many possible complications including bronchopulmonary dysplasia. Avoiding mechanical ventilation is thought to be a critical goal, and different modes of noninvasive respiratory support beyond nasal continuous positive airway pressure, such as nasal intermittent positive pressure ventilation and synchronized nasal intermittent positive pressure ventilation, are also available and may reduce intubation rate. Several trials have demonstrated that the newer modes of noninvasive ventilation are more effective than nasal continuous positive airway pressure in reducing extubation failure and may also be more helpful as modes of primary support to treat respiratory distress syndrome after surfactant and for treatment of apnea of prematurity. With synchronized noninvasive ventilation, these benefits are more consistent, and different modes of synchronization have been reported. Although flow-triggering is the most common mode of synchronization, this technique is not reliable for noninvasive ventilation in neonates because it is affected by variable leaks at the mouth and nose. This review discusses the mechanisms of action, benefits and limitations of noninvasive ventilation, describes the different modes of synchronization and analyzes the technical characteristics, properties and clinical results of a flow-sensor expressly developed for synchronized noninvasive ventilation. PMID:27251453

  14. Clinical proteomic biomarkers: relevant issues on study design & technical considerations in biomarker development

    PubMed Central

    2014-01-01

    Biomarker research is continuously expanding in the field of clinical proteomics. A combination of different proteomic–based methodologies can be applied depending on the specific clinical context of use. Moreover, current advancements in proteomic analytical platforms are leading to an expansion of biomarker candidates that can be identified. Specifically, mass spectrometric techniques could provide highly valuable tools for biomarker research. Ideally, these advances could provide with biomarkers that are clinically applicable for disease diagnosis and/ or prognosis. Unfortunately, in general the biomarker candidates fail to be implemented in clinical decision making. To improve on this current situation, a well-defined study design has to be established driven by a clear clinical need, while several checkpoints between the different phases of discovery, verification and validation have to be passed in order to increase the probability of establishing valid biomarkers. In this review, we summarize the technical proteomic platforms that are available along the different stages in the biomarker discovery pipeline, exemplified by clinical applications in the field of bladder cancer biomarker research. PMID:24679154

  15. Political and technical issues of coal fire extinction in the Kyoto framework

    NASA Astrophysics Data System (ADS)

    Meyer, U.; Chen-Brauchler, D.; Rüter, H.; Fischer, C.; Bing, K.

    2009-04-01

    It is a highly desirable effort to extinguish as much coal fires as possible in short time to prevent large losses of energy resources and to minimise CO2 and other exhaust gas releases from such sources. Unfortunately, extinguishing coal fires needs massive financial investments, skilled man power, suited technology and a long time. Even mid to small scale coal fires need several months of extinguishing measures and of monitoring time after extinction resulting in expenditures of a minimum of several hundred thousand Euros. Large companies might be willing to spend money for coal fire extinction measures but smaller holdings or regional governments might not have the monetary resources for it. Since there is no law in China that demands coal fire extinction, measures under the Kyoto framework may be applied to sell CO2 certificates for prevented emissions from extinguished coal fires and thus used as a financial stimulus for coal fire extinction activities. The set-up for methodologies and project designs is especially complex for coal fire extinction measures and thus for necessary exploration, evaluation and monitoring using geophysical and remote sensing methods. A brief overview of most important formal and technical aspects is given to outline the conditions for a potentially successful CDM application on coal fires based on geophysical observations and numerical modelling.

  16. Engineering development of advanced coal-fired low-emission boiler systems. Technical progress report No. 5, October--December 1993

    SciTech Connect

    Not Available

    1994-04-06

    Work continued as planned and scheduled. Total expenditures are below budget. Task 2 is complete. Task 3 is complete except for R, D & T Plan -- Phase II. Task 4 is currently slightly behind schedule but is projected to finish on or ahead of schedule. Task 5 was started early. The following major deliverables were issued: (1) Technical Paper for `93 International Joint Power Generation Conference. (2) Technical Paper for IEA Second International Conference, and (3) Topical Report by EAR on Air Toxics. Subtask 4.1 -- Engineering Analysis in support of the CGU design is nearly complete and partial design specifications are being employed in Task 5. Subtask 4.2 -- Experimental Research efforts consisted of the first series of Drop Tube Furnace tests. Data is being analyzed. Subtask 4.3 -- Modeling work to data resulted in input files for Boiler Simulation Facility and flow pattern convergence was attained. Particle combustion is the next step. This work will be reported on at the next Quarterly Project Review meeting. Task 5 was started early to facilitate Task 6 schedule and quality. Integration of the SNO{sub x} Hot Scheme into the boiler and turbine/feedwater train was optimized and design work on the boiler and ``backend`` is underway. Cost estimating assumptions and methodology were discussed at length and finalized. The RAM analysis is nearly complete. BOP engineering is in progress. No changes to the Work Plan are anticipated for the next quarter.

  17. Savannah River Ecology Laboratory, Annual Technical Progress Report of Ecological Research, June 30, 2002

    SciTech Connect

    Paul M. Bertsch,

    2002-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of The University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) near Aiken, South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE). The Laboratory's research mission during the 2002 fiscal year was fulfilled with the publication of 76 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 50 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members, staff, and graduate students received awards. These are described in the section titled Special Accomplishments of Faculty, Staff, Students, and Administration on page 51. Notable scientific accomplishments include work conducted on contaminant transport, stable isotopes, sandhills ecology, and phytoremediation: (1) A collaborative study between Dr. Tom Hinton at SREL and scientists at SRTC demonstrated the feasibility of using illite clay to sequester 137Cs in sediments along the P and R reactor cooling canal system, where approximately 3,000 acres of land are contaminated. Overall, the study showed significant decreases in cesium concentrations and bioavailability following the addition of illite with no sign of harm to the ecosystem. While the cesium remains sequestered from the biosphere, its radioactivity decays and the process progresses from contaminant immobilization to remediation. (2) SREL's stable isotope laboratory is now fully functional. Stable isotope distributions in nature can provide important insights into many historical and current environmental processes. Dr. Christopher Romanek is leading SREL's research in this area

  18. [Study of institutional issues relating to transportation of high level waste]. Final technical report

    SciTech Connect

    Not Available

    1993-06-25

    This is the ``seventh`` and final Quarterly Report under the scope of work for cooperative agreement between the Western Interstate Energy Board and the US Department of Energy. The report covers the period January--March 1993. The cooperative agreement was to expire in June 1992, but DOE granted an extension through March 24, 1993. Since this is the last Quarterly Report under the expired cooperative agreement, most tasks are noted as being completed. Two final items, however, will soon be sent to DOE -- final minutes from the March 9--11 High- Level Radioactive Waste Committee meeting, and the Year-End Technical Report. Some highlights from the quarter: The Committee decided on a preferred format for the revised Spent Fuel and High-Level Radioactive Waste Transportation Primer. The document would be 100- 200 pages, accompanied by a series of white papers on key transportation elements. A 25--30 page handbook for educating western state elected officials would also be prepared. On March 24, the Committee sent a letter to DOE commenting on the Near-Site Transportation Infrastructure report findings. The Committee is concerned that infrastructure limitations may limit the rail shipping option in many instances, even after upgrades have been implemented. The NSTI findings may also have significant relevance to the decision to develop multi-purpose canisters. On April 1, the Committee sent DOE the white paper, Transportation Implications of Various NWPA Program Options, which determined that DOE cannot develop a national transportation system by 1998 for shipments to an MRS or other federal storage facility.

  19. [List and drag forces on droplets and particles in wall-bounded shear flows]. Technical progress report

    SciTech Connect

    McLaughlin, J.B.

    1992-11-01

    This project has two goals, to calculate the lift force on a spherical droplet or particle that translates through a shear flow, and to measure the inertial migration velocity that is caused by the lift force. The focus of the study is on a range of Reynolds numbers that has been shown to be of importance in the inertial deposition of aerosols from turbulent shear flows. Aspects of current technical progress summarized are the asymptotic analysis, computer simulations, and experimental measurements. Future plans and resulting publications are given.

  20. Horizontal oil well applications and oil recovery assessment. Technical progress report, January--March 1994

    SciTech Connect

    McDonald, W.J.

    1994-06-01

    The primary objective of this project is to examine factors affecting technical and economic success of horizontal well applications. The project`s goals will be accomplished through five tasks designed to evaluate the technical and economic success of horizontal drilling, highlight current limitations, and outline technical needs to overcome these limitations. Data describing operators` experiences throughout the domestic oil and gas industry will be gathered and organized. MEI databases containing detailed horizontal case histories will also be used. All these data will be categorized and analyzed to assess the status of horizontal well technology and estimate the impact of horizontal wells on present and future domestic oil recovery and reserves. Accomplishments for this quarter are presented.

  1. GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003

    SciTech Connect

    SHENOY, A.S.

    2003-05-01

    A271 GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003. Petten advised GA the start of the HFR-EU2 irradiation is being delayed until late July 2004. HFR-EU1 (pebble fuel) is also delayed until February/March 2004. The reason for the delays was implementation of new financial regulations at Petten that delayed the contracts for capsule fabrication. Review of the MHR-2 Fuel Product Specification was completed. Revision of the specification to incorporate the review results is in progress. Detailed test matrices have been drafted for capsule irradiation tests and for post-irradiation heating tests proposed for development and qualification of advanced coated-particle fuels capable of meeting anticipated VHTR fuel performance requirements.

  2. Characterization of porosity via secondary reactor. Quarterly technical progress report, 1 October 1992--31 December 1992

    SciTech Connect

    Calo, J.M.

    1992-12-31

    In this quarterly technical Progress report, we summarize the progress which has been achieved with the development of the small angle scattering capability to be used in the current project. In particular, the following was accomplished during the reporting period. The parameter estimation code, MARQFIT, has been tested and is fully operational. The code has been applied to small angle neutron scattering (SANS) data on coals swollen with deuterated solvents. Application of the FPPS model to these data indicated that the large sphere distribution apparently requires a mean greater than 1000{Angstrom}. This was attributed to the influence of interparticle voids. Specific surface areas were also estimated for these coals. Application of this model to the coal chars used in the current project will not be subject to the same effects.

  3. Flora Cooke versus Theodore Bilbo: Progressive Educator Challenges Senator over Race Issues in 1945

    ERIC Educational Resources Information Center

    Kellum, Ronald

    2008-01-01

    The end of World War II was imminent by July of 1945 when 80-year-old progressive educator Flora Cooke of Chicago criticized Senator Theodore Bilbo of Mississippi for filibustering a bill that provided oversight in the government's awarding of military contracts and in its hiring practices. He interpreted the bill as a threat to the South's…

  4. State Policy Roundup: Progress on Infant-Toddler Issues across the United States

    ERIC Educational Resources Information Center

    Norton, Yolanda

    2006-01-01

    This article summarizes state and community policy activities during the final six months of 2006 and provides updates of the progress to serve infants, toddlers, and their families. The following states are included in the report: (1) Rhode Island; (2) Virginia; (3) New York; (4) Pennsylvania; (5) Nebraska; (6) Ohio; (7) Washington; (8) Arizona;…

  5. State and Community Policy Roundup: Progress on Infant-Toddler Issues across the United States

    ERIC Educational Resources Information Center

    DiLauro, Elizabeth; Jones, Lynn; Nelson, Florence

    2007-01-01

    This article summarizes state and community policy activities during the first six months of 2007 and provides updates of the progress to serve infants, toddlers, and their families. The following states are included in the report: (1) Arkansas; (2) California; (3) Indiana; (4) Iowa; (5) Michigan; (6) Minnesota; (7) New York; (8) Ohio; (9)…

  6. State Policy Roundup: Progress on Infant-Toddler Issues across the United States

    ERIC Educational Resources Information Center

    Norton, Yolanda

    2006-01-01

    This article summarizes state and community policy activities during the first six months of 2006 and provides updates of the progress to serve infants, toddlers, and their families. The following states are included in the report: (1) Rhode Island; (2) Virginia; (3) New York; (4) Pennsylvania; (5) Nebraska; (6) Ohio; (7) Washington; (8) Arizona;…

  7. Index to Nuclear Safety: a technical progress review by chrology, permuted title, and author, Volume 11(1) through Volume 20(6)

    SciTech Connect

    Cottrell, W.B.; Passiakos, M.

    1980-06-01

    This index to Nuclear Safety, a bimonthly technical progress review, covers articles published in Nuclear Safety, Volume II, No. 1 (January-February 1970), through Volume 20, No. 6 (November-December 1979). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 600 technical articles published in Nuclear Safety in the last ten years are listed in this index.

  8. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 4. Technical Report # 09-03

    ERIC Educational Resources Information Center

    Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  9. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 1. Technical Report # 0919

    ERIC Educational Resources Information Center

    Alonzo, Julie; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grade 1. These measures, available as part of easyCBM [TM], an online progress monitoring assessment system, were developed in 2008 and administered to approximately 2800 students from schools…

  10. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Kindergarten. Technical Report # 0921

    ERIC Educational Resources Information Center

    Alonzo, Julie; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in kindergarten. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2008 and administered to approximately 2800 students from…

  11. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 8. Technical Report # 09-04

    ERIC Educational Resources Information Center

    Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  12. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 5. Technical Report # 09-01

    ERIC Educational Resources Information Center

    Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  13. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 2. Technical Report # 0920

    ERIC Educational Resources Information Center

    Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  14. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 7. Technical Report 0908

    ERIC Educational Resources Information Center

    Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  15. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 3. Technical Report # 09-02

    ERIC Educational Resources Information Center

    Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

    2009-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  16. Prototype development of an apparatus to locate and map sea floor petroleum seepages. First quarterly technical progress report, August 1, 1995--October 31, 1995

    SciTech Connect

    1995-12-01

    This document is the first quarterly technical progress report for the project entitled {open_quotes}Prototype Development of an Apparatus to Locate and Map Sea Floor Petroleum Seepages{close_quotes}. This report describes progress in three areas: electronic design, mechanical design, and experiment/research.

  17. The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 6. Technical Report 09-07

    ERIC Educational Resources Information Center

    Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

    2008-01-01

    In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

  18. OTEC support services. Quarterly technical progress report No. 9, 15 May-14 August 1980

    SciTech Connect

    1980-08-01

    System integration, system engineering, and management support services provided by the VSE Corporation for the Ocean Thermal Energy Conversion Program of the Ocean Systems Branch, Division of Central Solar Technology, DOE are described. The services are provided under seven task areas: (1) survey, analysis, evaluation, and recommendation concerning program performance; (2) program technical monitoring; (3) development and implementation of methodology to identify and evaluate program alternatives; (4) technical assignments; (5) OTEC system integration; (6) environment and siting considerations; and (7) transmission subsystem considerations. (WHK)

  19. Electrostatic beneficiation of coal. Quarterly technical progress report, July 1, 1996--September 30, 1996

    SciTech Connect

    Mazumder, M.K.; Lindquist, D.; Tennal, K.B.

    1996-11-01

    Progress reports are presented for the following tasks: single particle measurement of size and charge; electrodynamic balance for trapping single particles for measurement; and tribocharging of coal particles passed through a circular tube.

  20. University of Florida, University research program in robotics. Annual technical progress report

    SciTech Connect

    Crane, C.D. III; Tulenko, J.S.

    1994-05-01

    Progress is reported in the areas of environmental hardening, database, world modeling, vision, man-machine interface, advanced liquid metal reactor inspection robot, and articulated transporter/manipulator system (ATMS) development.

  1. Tunable composite membranes for gas separations. Quarterly technical progress report, May--July 1996

    SciTech Connect

    Ferraris, J.P.; Balkus, K.J. Jr.; Musselman, I.H.

    1996-08-05

    Significant progress has been made in the synthesis and characterization of conducting polymer composite membranes for gas separations. Zeolite/polyalkylthiophene composite membranes have been prepared and characterized for zeolite NaY.

  2. [A clinical trial of neutron capture therapy for brain tumors]. Technical progress report 1988

    SciTech Connect

    Zamenhof, R.G.

    1988-12-31

    This report describes progress made in refining of neutron-induced alpha tract autoradiography, in designing epithermal neutron bean at MITR-II and in planning treatment dosimetry using Monte Carlo techniques.

  3. Information and Communications Technical Support Services to the Office of Environment, Safety, and Health. Progress report

    SciTech Connect

    1993-12-01

    Progress is reported on the following tasks: development of safety publications, conference support, planning and reporting, MORT A/I video, print products, special graphics, and SAFE software development.

  4. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

    SciTech Connect

    1997-09-01

    Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

  5. Technical issues in harvesting and concentrating stem cells (bone marrow and adipose).

    PubMed

    Bowen, Jay E

    2015-04-01

    The area of regenerative medicine, through the use of cell-based or biologic therapies, affords various options even with the choice of autologous stem cells and requires the clinician to use the currently evolving science along with the art of medicine. Potential sources for stem cells are embryos, fetuses, and adults (adipose tissue or adult cells, usually from skin [induced pluripotent], amniotic fluid, cartilage, bone marrow, menstrual blood, peripheral blood, placenta, skin, teeth, synovium, or umbilical cord blood). Issues regarding the source of stem cells include ethical and political/regulatory concerns, cell frequency, ease/difficulty of extraction, ease/difficulty of graft preparation, and host reaction to the implant. The most common sources of stem cells for orthopedic conditions are adipose tissue and bone marrow. Various opinions are expressed within the medical literature for and against both of these stem cell sources. This article will review patient concerns and preparation for obtaining cells; equipment, supplies, and staffing for the procedures; techniques, pearls, pitfalls, and risks of the procedures; and the manner of/options for processing the cells. PMID:25864664

  6. Technical progress report for the quarter 1 October-31 December 1980

    SciTech Connect

    Not Available

    1981-01-01

    This report describes the technical accomplishments on the commercial nuclear waste management programs and on the geologic disposal of nuclear wastes. The program is organized into eight tasks: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. (DLC)

  7. Mathematics Technical Report: Exercise Volume. National Assessment of Educational Progress. Report No. 04-MA-20.

    ERIC Educational Resources Information Center

    Education Commission of the States, Denver, CO. National Assessment of Educational Progress.

    Included in Chapter 1 of this report are background information on the 1972-73 mathematics assessment; details of the computational formulas used in reporting results; and explanations of the technical documentation, exercise presentation, documentation pages, scoring guides, and data tables for released and unreleased exercises. The remainder of…

  8. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    ERIC Educational Resources Information Center

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  9. THE DEVELOPMENT OF ACHIEVEMENT MEASURES FOR TRADE AND TECHNICAL EDUCATION. PROGRESS REPORT NUMBER THREE.

    ERIC Educational Resources Information Center

    BALDWIN, THOMAS S.

    DURING THIS PERIOD FROM SEPTEMBER 1 THROUGH NOVEMBER 30, 1966, 35 FIELD CONSULTANTS COMPLETED ANALYSIS OF THEIR INDIVIDUAL TRADE AND TECHNICAL CURRICULUMS. THESE ANALYSES WERE DEVELOPED INTO AN OUTLINE TO SERVE AS A GUIDE FOR DEVELOPING ACHIEVEMENT TESTS. THE FINAL OUTLINE WAS DIVIDED INTO AS MANY DIFFERENT AREAS AS THE CONSULTANTS FELT NECESSARY…

  10. Making human junk: child labor as a health issue in the Progressive Era.

    PubMed Central

    Derickson, A

    1992-01-01

    The adverse health effects of work on approximately 2 million employed children troubled many in the United States during the early 20th century. Advocates of reform initially built a rationale for protective legislation primarily from informal, lay observations of the broad developmental outcomes of premature employment. In this endeavor, they projected a dismal scenario of impending national deterioration. This argument received strong criticism for the inadequacy of its corroborating evidence. In response, Progressive reformers emphasized the specific, measurable consequences of particular occupations. Increasingly, liberal advocates of the exclusion of boys and girls from the work force drew upon statistical compilations of occupational injuries and illnesses diagnosed by physicians. Despite their turn toward scientism, Progressives remained somewhat ambivalent about the sufficiency of quantitative data alone to achieve their aims. Images p1282-a p1285-a PMID:1503173

  11. Progression in Ethical Reasoning When Addressing Socio-Scientific Issues in Biotechnology

    ERIC Educational Resources Information Center

    Berne, Birgitta

    2014-01-01

    This article reports on the outcomes of an intervention in a Swedish school in which the author, a teacher-researcher, sought to develop students' (14-15 years old) ethical reasoning in science through the use of peer discussions about socio-scientific issues. Prior to the student discussions various prompts were used to highlight different…

  12. Liqiud Phase Methanol Process Development Unit: installation, operation, and support studies. Annual technical progress report No. 4, 28 September 1981-30 September 1982

    SciTech Connect

    Not Available

    1982-10-20

    The objective of this project is to demonstrate the technical feasibility of indirect coal liquefaction using the Liquid Phase Methanol (LPMeOH) process. Task I - Program Planning was completed. The Phase I Report: Engineering, Cost, and Program Evaluation was submitted to DOE, and DOE approval to proceed with Phase II was granted. Revision 1 of the engineering flowsheet was issued. A unified design strategy was adopted to allow the Process Development Unit (PDU) to be capable either of liquid-fluidized or liquid-entrained operation. Heat and material balances were calculated for eight (8) design cases. The final PDU design basis was established. A Design hazards Review was conducted. The Texas Air Control Board granted an exemption from construction and operating permits. The data acquisition system and 80% of all equipment items required are in hand or in the procurement stage. Eighteen (18) items are being reused from the Chicago Liquid Phase Methanation Unit (LPM) or the Bruceton Synthoil facility. Equipment being reused from the Chicago LPM unit was shipped to LaPorte. For the CSI Laboratory PDU modifications, the Piping and Instrumentation Diagram (P and ID), equipment layout, and piping drawings were completed and major equipment was ordered. Testing of in-situ catalyst reduction/activation was completed by CSI on the first commercial catalyst candidate. Reports on a liquid-fluidized run in the CSI Fairfield Laboratory PDU and on a liquid-entrained laboratory work accomplished under advance funding were issued. Air Products and Chemicals, Inc. (APCI) completed baseline catalyst testing and shakedown of the Gas Phase Screening Reactor. Shakedown of the Stirred Autoclave Reactor is in progress. Liquid Phase methanol (LPMeOH) modeling by APCI progressed, using the Deckwer model and a Continuous Stirred Tank Reactor (CSTR) model. CSI initiated an effort to verify and refine their methanol equilibrium model.

  13. DNA banking and DNA databanking: Legal, ethical, and public policy issues. Progress report, [April 1, 1993--March 31, 1994

    SciTech Connect

    Reilly, P.R.; McEwen, J.E.; Small, D.

    1994-02-18

    The purpose of the grant was to provide support to enable us to: (1) perform legal and empirical research and critically analyze DNA banking and DNA databanking as those activities are conducted by state forensic laboratories, the military, academic researchers, and commercial enterprises; and (2) develop a broadcast quality educational videotape for viewing by the general public about DNA technology and the privacy and related issues that it raises. The grant thus has both a research and analysis component and a public education component. This report outlines the work completed since the inception of the project and describes the activities still in progress.

  14. Robotic weld overlay coatings for erosion control. Quarterly technical progress report, April 1993--June 1993

    SciTech Connect

    Levin, B.F.; Dupont, J.N.; Marder, A.R.

    1993-07-20

    Twelve weld overlay hardfacing alloys have been selected for preliminary erosion testing based upon a literature review. Four of the selected coatings were deposited on a 1018 steel substrate using plasma arc welding process. During the past quarter, the remaining eight coatings were deposited in the same manner. Ten samples from each coatings were prepared for erosion testing. Microstructural characterization of each coating is in progress. This progress report describes coating deposition and sample preparation procedures. Relation between coatings hardness and formation of cracks in coatings is discussed.

  15. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, November 1, 1997--January 31, 1998

    SciTech Connect

    1998-03-01

    This report provides information on projects conducted by the Amarillo National Resource Center for Plutonium, a consortium of Texas A&M University, Texas Tech University, and the University of Texas. Progress is reported for four major areas: (1) plutonium information resource; (2) environmental, safety, and health; (3) communication, education, training, and community involvement; and (4) nuclear and other material studies. Environmental, safety, and health projects reported include a number of studies on high explosives. Progress reported for nuclear material studies includes storage and waste disposal investigations.

  16. Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012

    SciTech Connect

    Kinney, Edward R.

    2014-09-12

    This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.

  17. Support services for ceramic fiber-ceramic matrix composites. Annual technical progress report

    SciTech Connect

    Hurley, J.P.; Nowok, J.W.

    1996-12-27

    Ceramic and advanced alloy corrosion in fossil energy systems is being investigated. During 1995-6, ash was collected for testing corrosion resistance of materials in air-blown fluidized-bed gasification systems. Descriptions of the activities are presented in this report, which is an extension of a technical paper on testing corrosion rates of ceramics in coal gasification systems. A section of this report covers factors affecting the composition of ash deposits.

  18. Horizontal oil well applications and oil recovery assessment. Technical progress report, July--September 1993

    SciTech Connect

    McDonald, W.J.

    1993-12-01

    The primary objective of this project is to examine factors affecting technical and economic success of horizontal well applications. The project`s goals will be accomplished through five tasks designed to evaluate the technical and economic success of horizontal drilling, ascertain its limitations, and outline technical needs to overcome these limitations. Data describing operators` experiences throughout the domestic oil and gas industry will be gathered and organized. MEI databases containing detailed horizontal case histories will also be used. All these data will be categorized and analyzed to assess the status of horizontal well technology and determine the impact of horizontal wells on present and future domestic oil recovery and reserves. A spreadsheet data file was constructed from well data describing 3885 domestic horizontal wells, the total as of the summer of 1993. Most domestic effort in horizontal drilling has been focused on fractured carbonate formations. Three principal formations are the focus of this activity: The Austin Chalk in Texas, the Bakken Shale in North Dakota, and the Niobrara in Colorado and Wyoming. Results from this formation type are well known and a large volume of published results is available. Given the scope of the present study, it was decided to limit the analyses to formations other than these three fractured carbonates. Based on domestic well data, 431 horizontal wells have been completed in other formations. These wells were highlighted for detailed study.

  19. Examining the Technical Adequacy of Progress Monitoring Using Early Writing Curriculum-Based Measures

    ERIC Educational Resources Information Center

    Hampton, David D.; Lembke, Erica S.

    2016-01-01

    The purpose of this study was to examine 4 early writing measures used to monitor the early writing progress of 1st-grade students. We administered the measures to 23 1st-grade students biweekly for a total of 16 weeks. We obtained 3-min samples and conducted analyses for each 1-min increment. We scored samples using 2 different methods: correct…

  20. National Assessment of Educational Progress. Career and Occupational Development Technical Report: Exercise Volume.

    ERIC Educational Resources Information Center

    Education Commission of the States, Denver, CO. National Assessment of Educational Progress.

    Exercises given to a national probability sample of 9-year-olds, 13-year-olds, 17-year-olds, and young adults (ages 26-35) to measure achievement of five broad objectives of career and occupational development (COD) are contained in this document. (The exercises were administered by the National Assessment of Educational Progress (NAEP), an…

  1. Electrostatic beneficiation of coal. Quarterly technical progress report, April 1, 1996--June 30, 1996

    SciTech Connect

    Mazumder, M.K.; Lindquist, D.; Tennal, K.B.

    1996-07-01

    Progress reports are presented for the following: modification to the electrostatic separator; review of DOE specifications for minimum beneficiation and calculations of grinding requirements based on washability; two-pass beneficiation; analysis of different sieve fractions; measurement of charge to mass ratio as a function of height of deposition; and charging of coal against different materials.

  2. [Radioisotope thermoelectric generators and ancillary activities]. Monthly technical progress report, 1 April--28 April 1996

    SciTech Connect

    1996-06-01

    Tehnical progress achieved during this period on radioisotope thermoelectric generators is described under the following tasks: engineering support, safety analysis, qualified unicouple fabrication, ETG fabrication/assembly/test, RTG shipping/launch support, design/review/mission applications, and project management/quality assurance/reliability.

  3. Connecticut Assessment of Educational Progress Citizenship/Social Studies 1977-78 Technical Report.

    ERIC Educational Resources Information Center

    Rubinstein, Sherry; Sorce, Patricia

    The document describes an instrument used to measure citizenship social studies achievement and skills for 9-, 13-, 17-, and 26 to 35-year-olds in Connecticut. Based on the National Assessment of Educational Progress (ED 049 113), objectives were to collect baseline data for future use in determining knowledge, to compare results with national…

  4. Energy conservation in citrus processing. Technical progress report No. 2, April 1, 1980-February 28, 1981

    SciTech Connect

    Leo, M.A.; Lari, R.I.; Moore, N.R.; Broussard, M.R.; Gyamfi, M.

    1981-03-15

    Systems that reduce energy usage and are economically viable in the citrus fruit processing industry are identified. The preliminary results of Phase I are presented. Alternative systems to be considered are classified and denoted as central, modular, integrated, and combined. Progress is reported on the central and modular systems. (MCW)

  5. Great Basin paleoenvironmental studies project; Technical progress report: First quarter (January--August 1993)

    SciTech Connect

    1993-12-31

    Project goals, project tasks, progress on tasks, and problems encountered are described and discussed for each of the studies that make up the Great Basin Paleoenvironmental Studies Project for Yucca Mountain. These studies are: Paleobotany, Paleofauna, Geomorphology, and Transportation. Budget summaries are also given for each of the studies and for the overall project.

  6. ENHANCED RECOVERY UTILIZING VARIABLE FREQUENCY DRIVES AND A DISTRIBUTED POWER SYSTEM TECHNICAL PROGRESS REPORT

    SciTech Connect

    Randy Peden; Sanjiv Shah

    2004-02-11

    This report describes the progress made during first six months of the project entitled ''Enhanced Recovery Utilizing Variable Frequency Drives and a Distributed Power System''. During this period, project plan, demonstration plan and project schedule were developed, equipment was ordered and baseline data was collected.

  7. Progress in International Reading Literacy Study (PIRLS): PIRLS 2006 Technical Report

    ERIC Educational Resources Information Center

    Martin, Michael O., Ed.; Mullis, Ina V. S., Ed.; Kennedy, Ann M., Ed.

    2007-01-01

    The International Association for the Evaluation of Educational Achievement (IEA)'s Progress in International Reading Literacy Study (PIRLS) provides internationally comparative data about students' reading achievement in primary school (the fourth grade in most participating countries). PIRLS also provides extensive information about the home and…

  8. Heber Geothermal Binary Demonstration Project. Quarterly technical progress report, September 15, 1980-March 31, 1981

    SciTech Connect

    Hanenburg, W.H.; Lacy, R.G.; Van De Mark, G.D.

    1981-06-01

    Work completed on the nominal 65 Megawatt (Mwe gross) Heber Geothermal Binary Demonstration Project, located at Heber, California, during the period of September 15, 1980, through March 31, 1981 is documented. Topics covered in this quarterly report include progress made in the areas of Wells and Fluids Production and Injection Systems, Power Plant Design and Construction, Power Plant Demonstration, and Data Acquisition and Dissemination.

  9. Savannah River Ecology Laboratory annual technical progress report of ecological research, period ending July 31, 1993

    SciTech Connect

    Vaitkus, M.R.; Wein, G.R.; Johnson, G.

    1993-11-01

    This progress report gives an overview of research programs at the Savannah River Site. Topics include; environmental operations support, wood stork foraging and breeding, defense waste processing, environmental stresses, alterations in the environment due to pollutants, wetland ecology, biodiversity, pond drawdown studies, and environmental toxicology.

  10. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    SciTech Connect

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  11. Intermediate/high energy nuclear physics. Technical progress report, June 15, 1991--June 14, 1992

    SciTech Connect

    Vary, J.P.

    1992-07-01

    This report discusses progress on the following research: quark cluster model; solving quantum field theories in non-perturbative regime;relativistic wave equations, quarkonia and electron-positron resonances; nuclear dependence at large transverse momentum; factorization at the order of power corrections; single-spin asymmetries; and hadronic photon production. (LSP)

  12. [Studies of the fundamental nature of catalytic acidity, sites and intermediates]: Final performance (technical progress) report

    SciTech Connect

    Not Available

    1993-12-31

    This project was concerned with the fundamental nature of catalyst acidity in the H-zeolites and silica/alumina cracking catalysts. This report summarizes the progress on this project over the past five years. The titles of the twelve papers generated by this research are provided in the attached bibliography in chronological order.

  13. [DEONTOLOGICAL ISSUES IN RAILWAY HYGIENE].

    PubMed

    Kaptsov, V A

    2015-01-01

    There are presented the main ethical and deontological problems encountered in practice and research activities of the hygienist in transport. There is shown the importance of strict compliance with hygienic standards, disregard for the principle of "technical attainability", the necessity of continuous training, improvement of skills of sanitary-educational activity and readiness to solve emerging ethical issues in connection with the development of scientific and technical progress. PMID:26302557

  14. Liquid fossil-fuel technology. Quarterly technical progress report, January-March 1983

    SciTech Connect

    Linville, B.

    1983-07-01

    Accomplishments for the quarter ending March 1983 are presented under the following headings: liquid fossil fuel cycle, processing, utilization, and project integration and technology transfer. Feature articles for this quarter are: (1) abandoned oil field reports issued; (2) oilfield water data bank report published; (3) microbial enhanced recovery report issued; (4) polymer-augmented project could be economic today; (5) carbon dioxide EOR estimates given; (6) BETC passes 65th milestone; and (7) fifty achievements for fifty years (1918-1968). BETC publications are also listed. (ATT)

  15. [Tampa Electric Company IGCC project]. Final public design report; Technical progress report

    SciTech Connect

    1996-07-01

    This final Public Design Report (PDR) provides completed design information about Tampa Electric Company`s Polk Power Station Unit No. 1, which will demonstrate in a commercial 250 MW unit the operating parameters and benefits of the integration of oxygen-blown, entrained-flow coal gasification with advanced combined cycle technology. Pending development of technically and commercially viable sorbent for the Hot Gas Cleanup System, the HGCU also is demonstrated. The report is organized under the following sections: design basis description; plant descriptions; plant systems; project costs and schedule; heat and material balances; general arrangement drawings; equipment list; and miscellaneous drawings.

  16. Molecular biological enhancement of coal biodesulfurization. Tenth quarterly technical progress report, [September--December 1991

    SciTech Connect

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D.; Baker, B.; Palmer, D.T.; Fry, I.J.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N.; Chakravanty, L.; Tuovinen, O.H.

    1991-12-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The specific technical objectives of the project are to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotrophic bacterium; and conduct a batch-mode optimization/analysis of scale-up variables.

  17. Molecular biological enhancement of coal biodesulfurization. Fourth quarterly technical progress report

    SciTech Connect

    Litchfield, J.H.; Fry, I.; Wyza, R.E.; Palmer, D.T.; Zupancic, T.J.; Conkle, H.N.

    1990-06-14

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  18. Molecular biological enhancement of coal biodesulfurization. Third quarterly technical progress report

    SciTech Connect

    Litchfield, J.H.; Fry, I.; Wyza, R.E.; Palmer, D.T.; Zupancic, T.J.; Conkle, H.N.

    1990-03-15

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: Clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; Return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; Transfer this pathway into a fast-growing chemolithotrophic bacterium; Conduct a batch-mode optimization/analysis of scale-up variables.

  19. Molecular biological enhancement of coal biodesulfurization. Ninth quarterly technical progress report

    SciTech Connect

    Litchfield, J.H.; Zupancic, T.J.; Baker, B.; Palmer, D.T.; Fry, I.J.; Tranuero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N.; Chakravanty, L.; Tuovinen, O.H.

    1991-09-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  20. Advanced direct liquefaction concepts for PETC generic units. Quarterly technical progress report, July 1992--September 1992

    SciTech Connect

    Not Available

    1992-11-01

    Preparation of the baseline economic assessment, based on Wilsonville Run {number_sign}263J, continued. This baseline study will serve as the reference against which the results of this program will be compared. During the quarter calculation of the material and energy balances for the conceptual commercial plant were completed and estimation of the investment for the main process units was begun (Wyoming plant site basis). A presentation on the technical results of the baseline study was prepared and delivered at the Quarterly Project Review Meeting in Pittsburgh.

  1. Coal-feeder development. Second quarterly technical progress report, January-March 1980

    SciTech Connect

    Mistry, D.K.

    1981-04-01

    The pilot-scale piston-feeder development is progressing satisfactorily and should proceed as planned. The bench scale testing of components, sub-system and critical areas continued to provide very useful information in support of the development of the complete feeder. The K30M seals and polyurethane scrapers are showing very promising results. The components development facility is being upgraded and testing at the bench scale level should be vigorously perused. The upgrading of the pilot scale feeder and its system will be emphasized during the next quarter to perform feeder capabilities and limitations testing. No progress on the 5.5-in. diameter pilot scale screw feeder has been made because IRRI is waiting decision from METC as to when the feeder can be installed on the 42-in. gas producer.

  2. Progress under the USDI-SWCC agreement for technical cooperation in desalination

    SciTech Connect

    Jamjoom, I.M.R.; Al-Yousef, A.R.F.; Heizer, R.T.

    1981-07-01

    Progress is reported on two desalination projects in Saudi Arabia sponsored by a joint agreement of the Saline Water Conversion Corporation (SWCC) and the US Department of the Interior (USDI). Project A, research, development, and training center (R, D and T), conducts needs analyses and trains Saudi Arabians to operate and maintain desalination plants. Project B is developing the technology for large-scale multistage flash (MSF) evaporation plants. A recent change in focus is deemphasizing project B, but the Joint Agreement continues to make progress on its goals. The appendix presents a summary of the operation and projects and lists the major design features of the R, D and T Center. 1 reference, 1 table. (DCK)

  3. In vivo mutagenicity and clastogenicity of ionizing radiation in nuclear medicine. Annual technical progress report, [1991

    SciTech Connect

    Kelsey, K.T.

    1991-12-31

    The overall goal of our research remains to investigate the mutagenic and clastogenic effects of exposure to low levels of ionizing radiation to human lymphocytes. Principally, we are studying hospital patients referred to a nuclear medicine department for diagnostic cardiac imaging and nuclear medicine technologies who administer radionuclides. Emphasis in the first year, as described in the first progress report, was on optimization of the hprt mutation assay, measurement of mutant frequencies in patients imaged with thallium-201, and measurement of mutant frequencies in controls. Emphasis in the second year has been on measurements of (1) chromosome aberrations in patients imaged with thallium-201, (2) mutant frequencies in patients imaged with technetium-99, (3) mutant frequencies in nuclear medicine technicians and physical therapists, (4) mutant frequencies in patients treated for Hodgkins disease with radiotherapy. The progress in these areas is described.

  4. Advanced thermally stable jet fuels. Technical progress report, July 1995--September 1995

    SciTech Connect

    Schobert, H.H.; Eser, S.; Song, C.

    1995-10-01

    The Penn State program in advanced thermally stable jet engine fuels has five components: development of mechanisms of degradation and solids formation; quantitative measurement of growth of sub-micrometer-sized and micrometer particles suspended in fuels during thermal stresses; characterization of carbonaceous deposits by various instrumental and microscopic methods; elucidation of the role of additives in retarding the formation of carbonaceous solids; and assessment of the potential of producing high yields of cycloalkanes and hydroaromatics by direct coal liquefaction. Progress is described.

  5. Biomass power for rural development. Technical progress report, January 1--March 31, 1998

    SciTech Connect

    Neuhauser, E.

    1998-11-01

    Brief progress reports are presented on the following tasks: design packages for retrofits at the Dunkirk Station; fuel supply and site development plans; major equipment guarantees and project risk sharing; power production commitment; power plant site plan, construction and environmental permits; and experimental strategies for system evaluation. The paper then discusses in more detail the following: feedstock development efforts; clone-site testing and genetic studies; and efforts at outreach, extension and technology transfer.

  6. U.C. Davis high energy particle physics research: Technical progress report -- 1990

    SciTech Connect

    1990-12-31

    Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

  7. Nuclear structure theory. Annual technical progress report, October 1, 1979-August 31, 1980. [Univ. of Rochester

    SciTech Connect

    French, J.B.; Koltun, D.S.

    1980-01-01

    This report summarizes progress during the past year in the following areas of nuclear structure and reaction theory: statistical spectroscopy (including random matrix methods, with applications to fluctuations in spectra and in strength distributions, and to problems of ergodicity; group symmetries in spectral-distribution theory; electromagnetic and ..beta.. transitions); meson scattering and absorption by nuclei (including general scattering theory with absorption, multiple scattering theory and its reactive content, statistical theory of absorption); and meson currents in electromagnetic transitions.

  8. No Child Left Behind: Methodological Challenges & Recommendations for Measuring Adequate Yearly Progress. CSE Technical Report.

    ERIC Educational Resources Information Center

    Thum, Yeow Meng

    The recent federal push under the No Child Left Behind Act to finalize means for gauging school improvement has stoked public anxiety, especially for public school officials who are charged with crafting and implementing defensible accountability systems. Other than the omnipresent political issues attending any proposal for shaping educational…

  9. Relations between Education and Technical Progress in Agriculture: Training of Specialists: The Sudanese Experience.

    ERIC Educational Resources Information Center

    Gutelman, Michel; And Others

    Focusing on the training of agricultural specialists (supervisors and operational technicians) in Sudan, this study identifies issues in the general agricultural situation and the type of agricultural development practiced there, the education system's output of technicians, and the degree of harmony between education and national needs. The…

  10. Advanced Gas Turbine Systems Research. Technical progress report, April 1, 1993--June 30, 1993

    SciTech Connect

    Not Available

    1993-12-31

    The responses to the first Request for Proposals issued by AGTSR in March were received and evaluated by the industrial Review Board. Ten were selected for subcontract awards, which are presently being negotiated. The number of Performing Member universities has increased by six, to 56, since the last report. Two additional members are pending.

  11. The information age as a work in progress: Implications for technical communicators

    SciTech Connect

    Preecs, B.L.

    1992-07-01

    The commercial media system in the United States is in the midst of radical, even revolutionary changes. Cable television companies are vying with telephone companies to provide advanced communications and information services to both homes and businesses. Recent decisions by the Federal Communications Commission to allow television networks to buy cable television systems create the possibility of bypassing local television stations. Computer companies are planning joint ventures with entertainment companies. The publishing, broadcasting, advertising, communications, and information-services businesses are converging into one universal, digital, interactive industry with annual revenues exceeding $120 billion. The same technology-driven changes also affect government. State and local governments are experimenting with delivering some government services electronically. While early experiments focus on easily delivered services, such as auto licenses, more complex applications are underway, such as creating information networks for economic development or converting property and utility records into computerized maps. The Information Age has arrived, and the implications for Society for Technical Communication (STC) members can hardly be overstated. Technical communicators will face changes in the way they work and how their work is distributed.

  12. Progress and issues for high-speed vertical cavity surface emitting lasers

    NASA Astrophysics Data System (ADS)

    Lear, Kevin L.; Al-Omari, Ahmad N.

    2007-02-01

    Extrinsic electrical, thermal, and optical issues rather than intrinsic factors currently constrain the maximum bandwidth of directly modulated vertical cavity surface emitting lasers (VCSELs). Intrinsic limits based on resonance frequency, damping, and K-factor analysis are summarized. Previous reports are used to compare parasitic circuit values and electrical 3dB bandwidths and thermal resistances. A correlation between multimode operation and junction heating with bandwidth saturation is presented. The extrinsic factors motivate modified bottom-emitting structures with no electrical pads, small mesas, copper plated heatsinks, and uniform current injection. Selected results on high speed quantum well and quantum dot VCSELs at 850 nm, 980 nm, and 1070 nm are reviewed including small-signal 3dB frequencies up to 21.5 GHz and bit rates up to 30 Gb/s.

  13. tDCS of the Cerebellum: Where Do We Stand in 2016? Technical Issues and Critical Review of the Literature

    PubMed Central

    van Dun, Kim; Bodranghien, Florian C. A. A.; Mariën, Peter; Manto, Mario U.

    2016-01-01

    Transcranial Direct Current Stimulation (tDCS) is an up-and-coming electrical neurostimulation technique increasingly used both in healthy subjects and in selected groups of patients. Due to the high density of neurons in the cerebellum, its peculiar anatomical organization with the cortex lying superficially below the skull and its diffuse connections with motor and associative areas of the cerebrum, the cerebellum is becoming a major target for neuromodulation of the cerebellocerebral networks. We discuss the recent studies based on cerebellar tDCS with a focus on the numerous technical and open issues which remain to be solved. Our current knowledge of the physiological impacts of tDCS on cerebellar circuitry is criticized. We provide a comparison with transcranial Alternating Current Stimulation (tACS), another promising transcranial electrical neurostimulation technique. Although both tDCS and tACS are becoming established techniques to modulate the cerebellocerebral networks, it is surprising that their impacts on cerebellar disorders remains unclear. A major reason is that the literature lacks large trials with a double-blind, sham-controlled, and cross-over experimental design in cerebellar patients. PMID:27242469

  14. INSTITUTE ON CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL TEACHER EDUCATION IN SMALL COLLEGES AND UNIVERSITIES. CENTER SEMINAR AND CONFERENCE REPORT NO. 8.

    ERIC Educational Resources Information Center

    BELL, A.P.

    THIRTY PARTICIPANTS INCLUDING TEACHER EDUCATORS AND ADMINISTRATORS ATTENDED A 2-WEEK TEACHER EDUCATION INSTITUTE DESIGNED TO CONSIDER CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL EDUCATION AND THEIR IMPLICATIONS FOR PROGRAMS OF TEACHER PREPARATION IN SMALL COLLEGES AND UNIVERSITIES. THE PRESENTATIONS BY SPECIAL CONSULTANTS WERE--(1) "CRITICAL…

  15. Advanced direct liquefaction concepts for PETC generic units, Phase 2. Quarterly technical progress report, January--March 1996

    SciTech Connect

    1996-05-01

    The aims of this research program are to advance to bench-scale testing, concepts that have the potential for making net reductions in direct coal liquefaction process costs. The research involves a teaming arrangement between the University of Kentucky Center for Applied Energy Research (CAER), Consolidation Coal Company (CONSOL), Sandia National Laboratories (SNL), and LDP Associates. Progress reports are presented for: Task 2.1.1 development of a catalyst screening test (UK/CAER); Task 2.1.2 activation of impregnated catalysts (UK/CAER); Task 2.2 laboratory support (CONSOL); Task 3 continuous operations/parametric studies (Hydrocarbon Technologies, Inc.) and; Task 4.4 conceptual design, preliminary technical assessment (LDP Associates).

  16. Reactivity of young chars via energetic distribution measurements. Quarterly technical progress report, 1 January 1993--31 March 1993

    SciTech Connect

    Calo, J.M.; Lu, W.; Mackinnon, J.A.; Zhang, L.H.

    1993-07-01

    In this quarterly technical progress report, we summarize some recent steam reactivity data obtained for two different chars - a Wyodak coal char, and a nonmineral matter-containing resin char. In particular, the following was accomplished during the reporting period: Temperature programmed desorption (TPD) spectra obtained from steam-gasified chars were examined. At least two major CO-liberating features were identified for the resin char samples - one centered ca. 1000{degrees}C and the other ca. 1050{degrees}C. The presence of catalytic mineral matter appears to be related to the appearance of an additional low temperature feature for the Wyodak char. Although the total amount of surface oxygen seems to be a gross indicator of reactivity, analysis of the desorption data assuming two different types of oxygen surface complexes, each exhibiting a single desorption activation energy, shows that the reactivity cannot be explained by the desorption rates of the complexes alone.

  17. Laser ultrasonic furnace tube coke monitor. Quarterly technical progress report, February 1, 1999--May 1, 1999: Report number 4

    SciTech Connect

    1999-05-15

    This report summarizes the technical progress achieved during the fourth quarter of the EPRI project. The focus of work during this reporting period was the construction of an electronic control module for the coke detector probe. The electronic control module supervises the actuation and data collection functions of the probe sensor. Basic operation of the probe controller was confirmed. The overall aim of the project is to demonstrate the performance and practical use of a probe for measuring the thickness of coke deposits located within the high temperature tubes of a thermal cracking furnace. This aim will be met by constructing a probe that will be tested using simulated coke deposits that are positioned inside of a bench-scale furnace. Successful development of the coke detector will provide industry with the only available method for on-line measurement of coke deposits.

  18. Early lung cancer detection in uranium miners with abnormal sputum cytology. Technical progress report, July 31, 1991--July 31, 1992

    SciTech Connect

    Saccomanno, G.

    1992-08-01

    This work supported by the United States of Energy, continues to add data on the health affects of cigarette smoking and radon exposure on uranium miners. Since the last Technical Progress Report in July or 1991, 537 sputum cytology samples have been collected on the 300 uranium workers in the surveillance study. To date there are 436 lung cancer cases in the Uranium Miner Tumor Registry with diagnostic slides from surgery and/or autopsy; an additional 40 cases have been diagnosed with sputum cytology only. In March of 1991 the Geno Saccomanno Uranium Workers Archive was established at St. Mary`s Hospital and Medical Center as a depository for biological specimens and epidemiological data from the 17,700 uranium miners who have been a part or the study.

  19. Fusion programs in applied plasma physics. Technical progress report, July 11, 1992--May 31, 1993

    SciTech Connect

    Not Available

    1993-07-01

    This report summarizes the progress made in theoretical and experimental research funded by US Department of Energy Grant No. DE-FG03-92ER54150, during the period July 11, 1992 through May 31, 1993. Four main tasks are reported: applied plasma physics theory, alpha particle diagnostic, edge and current density diagnostic, and plasma rotation drive. The report also discusses the research plans for the theory and experimental programs for the next grant year. Reports and publications supported by the grant during this period are listed in the final section.

  20. Decontamination Systems Information and Research Program. Quarterly technical progress report, July 1--September 30, 1993

    SciTech Connect

    Not Available

    1993-10-01

    Progress reports are presented for the following projects: systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies--drain-enhanced soil flushing (DESF) for organic contaminants removal; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors--monolayer and multilayer self-assembled films for chemical sensors; Winfield Lock and Dam remediation; Winfield cleanup survey; assessment of technologies for hazardous waste site remediation--non-treatment technologies and pilot scale test facility implementation; assessment of environmental remediation storage technology; assessment of environmental remediation excavation technology; assessment of environmental remediation monitoring technology; and remediation of hazardous sites with steam reforming.

  1. Diagnostic development and support of MHD Test Facilities. Technical progress report, October 1991--December 1991

    SciTech Connect

    Not Available

    1994-07-01

    The Diagnostic Instrumentation and Analysis Laboratory (DIAL) at Mississippi State University (MSU) is developing diagnostic instruments for magnetohydrodynamic (MHD) power train data acquisition and for support of MHD component development test facilities. Microprocessor-controlled optical instruments, initially developed for Heat Recovery/Seed Recovery (HRSR) support, are being refined, and new systems to measure temperatures and gas-seed-slag stream characteristics are being developed. To further data acquisition and analysis capabilities, the diagnostic systems are being interfaced with DIAL`s computers. Technical support for the diagnostic needs of the national MHD research effort is being provided. DIAL personnel also cooperate with government agencies and private industries to improve the transformation of research and development results into processes, products and services applicable to their needs.

  2. Advanced direct liquefaction concepts for PETC generic units. Quarterly technical progress report, April 1994--June 1994

    SciTech Connect

    1994-09-01

    The technical approach of the contract has been expanded to provide additional economic evaluation of related process options. Additional data will be developed in the following areas to facilitate these evaluations. The effect of several modified pretreatments on liquefaction will be investigated. These include catalytic and thermal dewaxing of distillate solvents, the effect that adding light resid to distillate solvent has on hydrotreating and dewaxing, the liquefaction behavior of dense-media separated low-rank coals, and methods of selectively removing oxygen from low-rank coals. Additional chemical, physical, and performance information on improved first-stage catalysts will be developed. Upgrading of ash concentrate to recover catalysts and improve low-rank coals will be assessed. The conversion of residual fractions to distillate by hydropyrolysis will be evaluated. The economic impact of these processes will be determined.

  3. West Hackberry Tertiary Project. Quarterly technical progress report, March 3, 1993--June 3, 1994

    SciTech Connect

    Gillham, T.H.

    1994-09-01

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility of combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoir for the project is the Camerina C-1,2,3 Sand located on the West Flank of West Hackberry Field in Cameron Parish, Louisiana. This reservoir has been unitized and is designated as the WH Cam C RI SU. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomic.

  4. The Progression of Podcasting/Vodcasting in a Technical Physics Class

    NASA Astrophysics Data System (ADS)

    Glanville, Y. J.

    2010-11-01

    Technology such as Microsoft PowerPoint presentations, clickers, podcasting, and learning management suites is becoming prevalent in classrooms. Instructors are using these media in both large lecture hall settings and small classrooms with just a handful of students. Traditionally, each of these media is instructor driven. For instance, podcasting (audio recordings) provided my technical physics course with supplemental notes to accompany a traditional algebra-based physics lecture. Podcasting is an ideal tool for this mode of instruction, but podcasting/vodcasting is also an ideal technique for student projects and student-driven learning. I present here the various podcasting/vodcasting projects my students and I have undertaken over the last few years.

  5. Vacuum heat treating furnace: Technical quarterly progress report No. 11, January 19, 1989--April 10, 1989

    SciTech Connect

    Not Available

    1989-01-01

    At the present time the project effort is in the TASK 3 stage of operational test cycles. The system operated and functioned completely through the 1st shake-down cycle and is continuing to operate through additional selected demonstration cycles. As noted in the prior No's 9 and 10 quarter, report comments these demonstration cycles with the Marketable Prototype Unit (MPU) are being limited to water as the quench medium. As discussed with my Inventions Coordinator Mr. Jack Aellen recently it is desirable, at this time, to restrict the MPU to water use only. It is anticipated that the project will be completed within the final project date of July 10, 1989. Additional Task 3 Special Testing (with water) is still to be accomplished, however, the writer does not expect any technical problems. Although the project has exceeded original overall budget and schedule estimates, the final project product has completely met expectations.

  6. Diagnostic development and support of MHD test facilities. Technical progress report, January--March 1991

    SciTech Connect

    Shepard, W.S.; Cook, R.L.

    1991-12-31

    The Diagnostic Instrumentation and Analysis Laboratory (DIAL) at Mississippi State University (MSU) is developing diagnostic instruments for magnetohydrodynamic (MHD) power train data acquisition and for support of MHD component development test facilities. Microprocessor-controlled optical instruments, initially developed for Heat Recovery/Seed Recovery (HRSR) support, are being refined, and new systems to measure temperatures and gas-seed-slag stream characteristics are being developed. To further data acquisition and analysis capabilities, the diagnostic systems are being interfaced with DIAL`S computers. Technical support for the diagnostic needs of the national MHD research effort is being provided. DIAL personnel also cooperate with government agencies and private industries to improve the transformation of research and development results into processes, products and services applicable to their needs.

  7. Management of dry flue gas desulfurization by-products in underground mines. Quarterly technical progress report, April 1995--June 1995

    SciTech Connect

    Chugh, Y.P.; Dutta, D.; Esling, S.

    1995-07-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. Previous quarterly Technical Progress Reports have set forth the specific objectives of the program, and a discussion of these is not repeated here. Rather, this report discusses the technical progress made during the period April 1 - June 30, 1995. A final topical report on the SEEC, Inc. demonstration of its technology for the transporting of coal combustion residues was completed during the quarter, although final printing of the report was accomplished early in July, 1995. The SEEC technology involves the use of Collapsible Intermodal Containers (CIC`s) developed by SEEC, and the transportation of such containers - filled with fly ash or other coal combustion residues - on rail coal cars or other transportation means. Copies of the final topical report, entitled {open_quotes}The Development and Testing of Collapsible Intermodal Containers for the Handling and Transport of Coal Combustion Residues{close_quotes} were furnished to the Morgantown Energy Technology Center. The Rapid Aging Test colums were placed in operation during the quarter. This test is to determine the long-term reaction of both the pneumatic and hydraulic mixtures to brine as a leaching material, and simulates the conditions that will be encountered in the actual underground placement of the coal combustion residues mixtures. The tests will continue for about one year.

  8. High SO{sub 2} removal efficiency testing. Technical progress report, [1 April--30 June 1993

    SciTech Connect

    Blythe, G.

    1993-07-15

    On the base program, testing was completed at the Tampa Electric Big Bend Station in November, 1992. The upgrade option tested was DBA additive. Project efforts primarily consisted of project management activities and reporting. Review comments were received for the draft Technical Note that was submitted last quarter. A paper was prepared summarizing results from this site for presentation at the 1993 SO{sub 2} Control Symposium which is planned for August. For Option 1, at the Hoosier Energy Merom Station, results from another program co-funded by the Electric Power Research Institute (EPRI) and the National Rural Electric Cooperative Association are being combined with results from DOE-funded testing. Three upgrade options have been tested: DBA additive, sodium formate additive, and high pH set point operation. All testing was completed by November, 1992. Project efforts during the current quarter were primarily in data reduction and reporting. The draft Technical Note for the Merom site was submitted in early April, and review comments were received in late May and early June. Option 2 involves testing at the Southwestern Electric Power Company Pirkey Station. For this option, baseline testing was conducted in February. The upgrade option scheduled to be tested at this site was sodium formate additive. However, based on interim results from other sites and feedback from the Technology Working Group for this project, it was decided to test both sodium formate and DBA additive at Pirkey. Parametric testing with DBA additive was conducted in March, and parametric testing with sodium formate was conducted in April. Based on the initial results from the parametric test series, DBA appeared to be the more attractive upgrade option for this site. Consequently, a DBA additive consumption test was conducted in May. Option 3 and 4 are discussed briefly.

  9. Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

    SciTech Connect

    Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

    2006-06-30

    The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

  10. Victoria's Child FIRST and IFS differential response system: progress and issues.

    PubMed

    Lonne, Bob; Brown, Gerry; Wagner, Ingrid; Gillespie, Kerri

    2015-01-01

    Differential response has long been utilized by statutory child protection systems in Australia. This article describes the advent and history of Victoria's differential response system, with a particular focus on the Child FIRST and IFS programme. This program entails a partnership arrangement between the Department of Human Services child protection services and community-based, not-for-profit agencies to provide a diverse range of early intervention and prevention services. The findings of a recent external service system evaluation, a judicial inquiry, and the large-scale Child and Family Services Outcomes Survey of parents/carers perspectives of their service experiences are used to critically examine the effectiveness of this differential response approach. Service-user perspectives of the health and wellbeing of children and families are identified, as well as the recognized implementation issues posing significant challenges for the goal of an integrated partnership system. The need for ongoing reform agendas is highlighted along with the policy, program and structural tensions that exist in differential response systems, which are reliant upon partnerships and shared responsibilities for protecting children and assisting vulnerable families. Suggestions are made for utilizing robust research and evaluation that gives voice to service users and promotes their rights and interests. PMID:25192958

  11. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1979-30 June 1980

    SciTech Connect

    Wetzel, R.G.

    1980-01-01

    Progress in research to evaluate the impact of utilization of fossil fuels on surface water is reported. Analyses of regulatory mechanisms of growth and rates of carbon cycling center on evaluation of quantitative control interactions among the microflora of the pelagial zones of several lakes of progressively greater eutrophy, littoral photosynthetic producer-decomposer complex, and allochthonous inorganic-organic influxes and their biotic processing. The underlying thesis is that quantification of the dynamic carbon fluxes among these components and their rate control mechanisms by physical and chemical factors are fundamental to elucidation of the rate functions of lake eutrophication. A major portion of the research has been directed towards the fate and nutrient mechanisms regulating qualitative and quantitative utilization and losses of organic carbon synthesized within lakes and their drainage basins. It has become increasingly apparent that the wetland and littoral flora, and attendant epiphytic and benthic microflora, have major regulatory controls on biogeochemical cycling of whole lake systems. A major effort on factors regulating the metabolism of littoral macrophytes and attached algae has been coupled to integrated studies on their decomposition and the fate of detrital dissolved and particulate organic matter. These organic products are being coupled to influences on enzymatic activity and inorganic nutrient cycling.

  12. GPHS-RTGs in support of the Cassini RTG Program. Semi annual technical progress report, September 26, 1994--April 2, 1995

    SciTech Connect

    1995-04-20

    The technical progress achieved during the period 26 September 1994 through 2 April 1995 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described herein. Monthly technical activity for the period 27 February 1995 through 2 April 1995 is included in this progress report. The report addresses tasks, including: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG Fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds).

  13. Key contributions in MHD power generation. Quarterly technical progress report, September 1, 1979-November 30, 1979

    SciTech Connect

    Louis, J F

    1980-03-01

    Separate entries were made in the data base for the four tasks which include: (1) investigation of electrical behavior in the vicinity of electrode and insulating walls; (2) studies of critical performance issues in the development of combustion disk generators; (3) development and testing of electrode modules, including studies of insulator properties; and (4) determination of coal combustion kinetics and ash behavior relevant to two-stage MHD combustors, and investigation of the mixing and flow aerodynamics of a high swirl geometry second stage. (WHK)

  14. Research in high energy physics. Annual technical progress report, December 1, 1993--November 30, 1998

    SciTech Connect

    Olsen, S.L.; Tata, X.

    1996-11-01

    The high energy physics research program at the University of Hawaii is directed toward the study of the properties of the elementary particles and the application of the results of these studies to the understanding of the physical world. Experiments using high energy accelerators are aimed at searching for new particles, testing current theories, and measuring properties of the known particles. Experiments using cosmic rays address particle physics and astrophysical issues. Theoretical physics research evaluates experimental results in the context of existing theories and projects the experimental consequences of proposed new theories.

  15. Support services for Ceramic Fiber-Ceramic Matrix Composites. Annual technical progress report

    SciTech Connect

    Hurley, J.P.

    1995-09-20

    Higher working-fluid temperatures are required to boost efficiency, exposing subsystems to more corrosive environments. Issues of special concern to ceramists are corrosion and blinding of hot-gas particulate filters and catastrophic failure of high-temperature ceramic heat exchangers. Fuel and operational factors that affect the corrosion rates of structural ceramics in coal-fired combustor systems are described, with examples of the corrosion of silicon carbide-based materials. Attention is focused on hot-gas particulate filtration and heat exchangers; gasification systems are also discussed. Objective of the report is to help the experimentalist measuring these factors to better design tests.

  16. Textured substrate method for the direct continuous casting of steel sheet: Technical progress report No. 4

    SciTech Connect

    Gaspar, T.

    1989-07-14

    The overall objective of this research project will be to demonstrate the feasibility of casting rapidly solidified steel strip 2 mm (0.080 in.) thick or greater using a textured chill block as described in US Patent No. 4,705,095, issues on November 10, 1987, to Ribbon Technology Corporation. The effect of melt overflow process variables on strip dimensions and uniformity will be investigated. Process variables include, but are not limited to, the following: super heat of the melt; wetting of substrate material; tundish design; and casting speed. Type 304 stainless and AISI 1020 standard carbon steel will be investigated.

  17. Textured substrate method for the direct continuous casting of steel sheet: Technical progress report No. 1

    SciTech Connect

    Gaspar, T.

    1988-10-21

    The overall objective of this research project will be to demonstrate the feasibility of casting rapidly solidified steel strip 2 mm (0.080 in.) thick or greater using a textured chill block as described in US Patent No. 4,705,095, issued on November 10, 1987, to Ribbon Technology Corporation. The effect of melt overflow process variables on strip dimensions and uniformity will be investigated. Process variables include, but are not limited to, the following: super heat of the melt; wetting of substrate material; tundish design; and casting speed. Type 304 stainless steel and AISI 1020 standard carbon steel will be investigated.

  18. Elliptical Galaxies and Bulges of Disc Galaxies: Summary of Progress and Outstanding Issues

    NASA Astrophysics Data System (ADS)

    Kormendy, John

    Bulge components of disc galaxies are the high-density centers interior to their outer discs. Once thought to be equivalent to elliptical galaxies, their observed properties and formation histories turn out to be richer and more varied than those of ellipticals. This book reviews progress in many areas of bulge studies. Two advances deserve emphasis: (1) Observations divide bulges into "classical bulges" that look indistinguishable from ellipticals and "pseudobulges" that are discier and (except in S0s) more actively star-forming than are ellipticals. Classical bulges and ellipticals are thought to form by major galaxy mergers. Discy pseudobulges are a product of the slow ("secular") evolution of galaxy discs. Nonaxisymmetries such as bars and oval distortions transport some disc gas toward the center, where it starbursts and builds a dense central component that is discier in structure than are classical bulges. Secular evolution explains many regular structures (e.g., rings) seen in galaxy discs. It is a new area of galaxy evolution work that complements hierarchical clustering. (2) Studies of high-redshift galaxies reveal that their discs are so gas-rich that they are violently unstable to the formation of mass clumps that sink to the center and merge. This is an alternative channel for the formation of classical bulges. This chapter summarizes big-picture successes and unsolved problems in the formation of bulges and ellipticals and their coevolution (or not) with supermassive black holes. I present an observer's perspective on simulations of cold dark matter galaxy formation including baryonic physics. Our picture of the quenching of star formation is becoming general and secure at redshifts z < 1. I conclude with a list of major uncertainties and problems. The biggest challenge is to produce realistic bulges + ellipticals and realistic discs that overlap over a factor of > 1000 in mass but that differ from each other as we observe over that whole range. A

  19. Development of an advanced, continuous mild gasification process for the production of co-products. Quarterly technical progress report, October--December 1991

    SciTech Connect

    Runge, B.D.; Ness, R.O. Jr.

    1992-01-01

    On November 6, 1991, a meeting was held at the AMAX Research and Development Center in Golden, Colorado. Those in attendance at the meeting included Brian Runge and Robert Ness of the EERC, Scott McFeely of Xoi, Frank Hogsett and Mahesh Jha of AMAX, and Jerry Sinor and Trevor Ellis of J.E- Sinor Consultants. Items on the agenda included framing the scope of work to be conducted by Sinor on the market assessment for mild gasification products. An attempt was made to draft an integrated time line for the completion of all subcontracts issued under the project. The commercial process flowsheet under development by XBi was presented for review. The goals to be achieved by the technical and economic assessment to be performed by XBi were outlined. Frank Hogsett reported on the progress of the coal cleaning being conducted by AMAX. As soon as sufficient coal has been cleaned, the mild gasification reactors at the EERC will be run to generate sufficient quantities of products to allow testing of product upgrading and utilization methods. The next project review meeting was held on December 12, 1991, in the Houston, Texas, offices of XBi. The major work conducted during this meeting focused on review of the preliminary process flow diagrams (PFOS) prepared by XBi. Several modifications were discussed and will be reflected in the updated PFDs.

  20. Magnetic fusion energy plasma interactive and high heat flux components. Volume I. Technical assessment of the critical issues and problem areas in the plasma materials interaction field

    SciTech Connect

    Conn, R.W.; Gauster, W.B.; Heifetz, D.; Marmar, E.; Wilson, K.L.

    1984-01-01

    A technical assessment of the critical issues and problem areas in the field of plasma materials interactions (PMI) in magnetic fusion devices shows these problems to be central for near-term experiments, for intermediate-range reactor devices including D-T burning physics experiments, and for long-term reactor machines. Critical technical issues are ones central to understanding and successful operation of existing and near-term experiments/reactors or devices of great importance for the long run, i.e., ones which will require an extensive, long-term development effort and thus should receive attention now. Four subgroups were formed to assess the critical PMI issues along four major lines: (1) PMI and plasma confinement physics experiments; (2) plasma-edge modelling and theory; (3) surface physics; and (4) materials technology for in-vessel components and the first wall. The report which follows is divided into four major sections, one for each of these topics.

  1. Technical progress report for the magnetohydrodynamics Coal-Fired Flow Facility for the period April 1, 1993--June 30, 1993

    SciTech Connect

    Not Available

    1993-10-01

    In this quarterly technical progress report, UTSI reports on progress on a multitask contract to develop the necessary technology for the steam bottoming plant of the MHD Steam Combined Cycle power plant. A Proof-Of-Concept (POC) test was conducted during the quarter and the results are reported. This POC test was terminated after 88 hours of operation due to the failure of the coal pulverizer main shaft. Preparations for the test and post-test activities are summarized. Modifications made to the dry electrostatic precipitator (ESP) are described and measurements of its performance are reported. The baghouse performance is summarized, together with actions being taken to improve bag cleaning using reverse air. Data on the wet ESP performance is included at two operating conditions, including verification that it met State of Tennessee permit conditions for opacity with all the flow through it. The results of experiments to determine the effect of potassium seed on NO{sub x} emissions and secondary combustion are reported. The status of efforts to quantify the detailed mass balance for all POC testing is summarized. The work to develop a predictive ash deposition model is discussed and results compared with deposition actually encountered during the test. Plans to measure the kinetics of potassium and sulfur on flames like the secondary combustor, are included. Advanced diagnostic work by both UTSI and MSU is reported. Efforts to develop the technology for a high temperature air heater using ceramic tubes are summarized.

  2. Technical progress report for the Magnetohydrodynamics Coal-Fired Flow Facility, October 1, 1993--December 31, 1993

    SciTech Connect

    Not Available

    1994-06-01

    In this quarterly technical progress report, UTSI reports on progress in developing the technology for the steam bottoming portion of the MHD Steam Combined Cycle power plant. The experimental program was effectively terminated and reoriented to preparation of reports on previous tests and maintaining the DOE facility. In this report, the results of tube corrosion studies for the samples removed after 500 hours of western coal testing are summarized. Plans for evaluating the tube samples after termination of the tests at 1,047 hours are discussed. The status of development of models to predict ash deposition on conductive heat transfer tubes and their validation with experimental data is presented. Modeling and experiments to induce agglomeration of particulate are also discussed. Significant accomplishments, findings and conclusions include: In summary, corrosion measurements on typical, commercial stainless steels and on low and intermediate chromium steels after 639 hours of LMF5 exposure in the SHTM test sections revealed corrosion that was generally acceptable in magnitude if corrosion kinetics are parabolic, but, except for the higher chromium alloys 253MA and 310, not if kinetics are linear. The production of bilayer scales, and the large amount of scale separation and fragmentation make long term parabolic kinetics unlikely, and result in a high likelihood for breakaway corrosion.

  3. Robotic weld overlay coatings for erosion control. Quarterly technical progress report, January 1995--March 1995

    SciTech Connect

    Levin, B.F.; Dupont, J.N.; Marder, A.R.

    1995-04-25

    Research is presently being conducted to develop a criteria for selecting weld overlay coatings for erosion mitigation in Circulated Fluidized Beds. During the last two quarters tensile tests were performed at 400{degrees}C for the Ultimet, Inconel-625, 316L SS, C-22, and Stellite-6 wrought alloys. Also, the erosion tests for these materials at 400{degrees}C were completed. The results of mechanical and erosion tests are used to correlate mechanical properties of selected wrought alloys such as tensile toughness, ductility, strain hardening coefficient and yield strength to their erosion resistance at 400{degrees}C. Preliminary results of correlations between erosion resistance of wrought alloys at 400{degrees}C and their mechanical properties are presented in this progress report.

  4. Base program on energy related research. Quarterly technical progress report, August--October 1993

    SciTech Connect

    Not Available

    1993-12-31

    Progress reports are presented for the following area of studies: oil and gas; advanced systems applications; environmental technologies; and applied energy science. Oil and gas includes the following tasks: CROW{sup TM} process modeling; and miscible-immiscible gas injection processes. Advanced systems applications covers: development and optimization of a process for the production of a premium solid fuel from Western U.S. coals; development of an on-line alkali monitoring probe; optimization of the recycle oil process for Eastern oil shale; and process support and development. Tasks in the environmental technologies are: solid waste management; and remediation of contaminated soils. Applied energy science covers heavy oil/plastics co-processing.

  5. Texas Experimental Tokamak: A plasma research facility. Technical progress report, November 1, 1993--October 31, 1994

    SciTech Connect

    Wootton, A.J.

    1994-07-01

    The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics in order to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks and in particular to understand the role of turbulence. So that they can continue to study the physics that is most relevant to the fusion program, TEXT completed a significant device upgrade this year. The new capabilities of the device and new and innovative diagnostics were exploited in all main program areas including: (1) configuration studies; (2) electron cyclotron heating physics; (3) improved confinement modes; (4) edge physics/impurity studies; (5) central turbulence and transport; and (6) transient transport. Details of the progress in each of the research areas are described.

  6. Methyl chloride via oxyhydrochlorination of methane. Quarterly technical progress report No. 10, January 1944--March 1994

    SciTech Connect

    1994-08-01

    In work related to the design and construction of the Process Development Unit (PDU) this quarter involved further detail design and a real start to the construction activities. Status updates are given below for each discipline in the Task 2.0 and 3.0 headings. This work is progressing well. with the caveat of several small slips in the scheduling. On the catalyst development front this quarter was extremely productive. Many catalyst screening experiments were completed and they showed that control of the reaction exotherm is going to be quite challenging under PDU conditions. The presence of much more efficient reactor design and the ability to maintain closer to isothermal conditions is expected to give a significant advantage in actual PDU operation. A major concern at the moment is the cost of La in the catalyst being used. An action plan to remedy this is being put together.

  7. Low severity coal liquefaction promoted by cyclic olefins. Quarterly technical progress report, April--June 1996

    SciTech Connect

    Curtis, C.W.

    1997-12-31

    The goal of this research is to develop a methodology for analyzing the reactivity of cyclic olefins in situ in a high temperature and high pressure infrared cell. Cyclic olefins, such as 1,4,5,8-tetrahydronaphthalene (isotetralin) and 1,4,5,8,9,10-hexahydroanthracene (HHA), are highly reactive donor compounds that readily donate their hydrogen to coal and model acceptors when heated to temperatures of 200{degrees}C and above. These donors are active donors in the low severity liquefaction of coal at 350{degrees}C as shown in the research performed in this project. The infrared studies are being performed in a high temperature infrared cell that was obtained from AABSPEC. Modifications to that cell have been made and have been reported in previous progress reports.

  8. Accelerator research studies. Technical progress report, June 1, 1991--May 31, 1992

    SciTech Connect

    Not Available

    1992-02-01

    The Accelerator Research Studies program at the University of Maryland, sponsored by the Department of Energy under grant number DE-FG05-91ER40642, is currently in the first year of a three-year funding cycle. The program consists of the following three tasks: TASK A, Study of Transport and Longitudinal Compression of Intense, High-Brightness Beams, TASK B, Study of Collective Ion Acceleration by Intense Electron Beams and Pseudospark Produced High Brightness Electron Beams; TASK C, Study of a Gyroklystron High-power Microwave Source for Linear Colliders. In this report we document the progress that has been made during the past year for each of the three tasks.

  9. [Geothermal system temperature-depth database and model for data analysis]. 5. quarterly technical progress report

    SciTech Connect

    Blackwell, D.D.

    1998-04-25

    During this first quarter of the second year of the contract activity has involved several different tasks. The author has continued to work on three tasks most intensively during this quarter: the task of implementing the data base for geothermal system temperature-depth, the maintenance of the WWW site with the heat flow and gradient data base, and finally the development of a modeling capability for analysis of the geothermal system exploration data. The author has completed the task of developing a data base template for geothermal system temperature-depth data that can be used in conjunction with the regional data base that he had already developed and is now implementing it. Progress is described.

  10. Great basin paleoenvironmental studies project; Technical progress report first quarter (year 2), June--August 1994

    SciTech Connect

    1994-10-01

    The paleobiotic and geomorphic records are being examined for the local and regional impact of past climates to assess Yucca Mountain`s suitability as a high-level nuclear waste repository. The project includes botanical, faunal, and geomorphic components that will be integrated to accomplish this goal Progress reports are presented for: Paleobotenical studies in the Great Basin; Paleofaunas studies in the Great Basin; Geomorphology studies in the Great Basin; and Transportation. The goal of the transportation project is to compare the results from three models (FESWMS-2DH, DAMBRK, and FLO-2D) that have been suggested as appropriate for evaluating flood flows on alluvial fans with the results obtained from the traditional one-dimensional, stochastic model used in previous research performed by DRI for the Yucca Mountain Project.

  11. Innovative hybrid gas/electric chiller cogeneration. Quarterly technical progress report, April--June, 2000

    SciTech Connect

    Nowakowski, G.

    2000-07-01

    A meeting was held at Alturdyne's facility in San Diego to discuss project progress. Cliff Carpenter, the NETL Program Manager, attended the meeting. As a result of the meeting, several decisions were made: (1) A General Motors engine would be specified as the prime mover; (2) A Carrier reciprocating compressor would be specified, however a Hitachi screw compressor with an integral oil sump was an interesting candidate if it was available in the right size and for the right price; (3) The motor/generator would provide two functions: as an induction motor and as a synchronous generator. The variable speed, constant frequency feature will not be included in the first generation product; and (4) The refrigerant will be R134-A.

  12. Accelerator research studies. Technical progress report, June 1, 1992--May 31, 1993

    SciTech Connect

    Not Available

    1993-03-01

    The Accelerator Research Studies program at the University of Maryland, sponsored by the Department of Energy under grant number DE-FG05-91ER40642, is currently in the second year of a three-year funding cycle. The program consists of the following three tasks: TASK A, ``Study of Transport and Longitudinal Compression of Intense, High-Brightness Beams,`` (P.I., M. Reiser); TASK B, ``Study of Collective Ion Acceleration by Intense Electron Beams and Pseudospark Produced High Brightness Electron Beams,`` (Co-P.I.`s, W.W. Destler, M. Reiser, M.J. Rhee, and C.D. Striffler); TASK C, ``Study of a Gyroklystron High-Power Microwave Source for Linear Colliders,`` (Co-P.I.`s, V.L. Granatstein, W. Lawson, M. Reiser, and C.D. Striffler). In this report we document the progress that has been made during the past year for each of the three tasks.

  13. Intermediate/high energy nuclear physics. Technical progress report, June 15, 1992--June 14, 1993

    SciTech Connect

    Vary, J.P.

    1992-12-31

    Progress during the last year is reviewed under the following topics: relativistic hadron--nucleus and nucleus--nucleus collisions (heavy meson production, photon production and fragmentation functions--direct photon production with the QCM and photon fragmentation functions, Cronin efffect and multiple scattering, effective nuclear parton distributions); solving quantum field theories in nonperturbative regime; light-front dynamics and high-spin states (soft form factor of the pion and nucleon for transverse and longitudinal momentum transfers, light front spinors for high-spin objects); high-energy spin physics; relativistic wave equations, quarkonia, and e{sup +}e{sup {minus}} resonances; associated production of Higgs boson at collider energies, and microscopic nuclear many-body theory and reactions. 135 refs.

  14. Robotic weld overlay coatings for erosion control. Quarterly technical progress report, October 1994--December 1994

    SciTech Connect

    Levin, B.F.; Dupont, J.N.; Marder, A.R.

    1995-01-25

    Research is presently being conducted to develop a criteria for selecting weld overlay coatings for erosion mitigation in Circulated Fluidized Beds. Initially, eleven weld overlay alloys were selected for erosion testing based upon a literature review. All eleven coatings were deposited on 1018 steel substrates using the plasma arc welding process. Ten samples from each coating were prepared for erosion testing. The coating deposition and sample preparation procedures were described in the second quarterly report. All selected coatings were erosion tested at 400{degree}C and their erosion resistance was evaluated by determining the steady state erosion rate. In addition, the microstructure of each coating was characterized before and after the erosion tests. The results of the tests are discussed in the third quarterly report. No correlations were found between room temperature hardness of the weld overlay coatings and their erosion resistance at elevated temperature. During the last quarter tensile tests were performed at 400{degree}C for the Ultimet, Inconel-625, 316L SS, C-22, and Stellite-6 wrought alloys. The erosion tests for these materials at 400{degree}C are in progress. The results of mechanical and erosion tests will be used to correlate mechanical properties of selected wrought alloys such as tensile toughness, ductility, strain hardening coefficient and yield strength to their erosion resistance at 400{degree}C. Also, the erosion behavior of the wrought alloys compared with similar weld alloys will be analyzed. The experimental procedure and results of the tensile tests are presented in this progress report.

  15. High SO{sub 2} removal efficiency testing. Technical progress report

    SciTech Connect

    Blythe, G.

    1994-04-28

    The project involves testing at six full-scale utility flue gas desulfurization (FGD) systems, to evaluate low capital cost upgrades that may allow these systems to achieve up to 98% SO{sub 2} removal efficiency. The upgrades to be evaluated mostly involve using additives in the FGD systems. On the base program, testing was completed at the Tampa Electric Big Bend Station in November 1992. The upgrade option tested was DBA additive. For Option 1, at the Hoosier Energy Merom Station, three upgrade options have been tested: DBA additive, sodium formate additive, and high pH set point operation. Option 2 has involved testing at the Southwestern Electric Power Company Pirkey Station. Both sodium formate and DBA additives were tested as potential upgrade options at Pirkey. On Option 3, for testing at the PSI Energy Gibson Station, a DBA additive performance and consumption test was conducted in late February through mid-March 1994. Preliminary results from these tests are discussed in Section 3 of this progress report. Option 4 is for testing at the Duquesne Light Elrama Station. The FGD system employs magnesium-enhanced lime reagent and venturi absorber modules. An EPRI-funded model evaluation of potential upgrade options for this FGD system, along with a preliminary economic evaluation, determined that the most attractive upgrade options for this site were to increase thiosulfate ion concentrations in the FGD system liquor to lower oxidation percentages and increase liquid-phase sulfite alkalinity, and to increase the venturi absorber pressure drop to improve gas/liquid contacting. Parametric testing of these upgrade options was conducted in late March 1994. Preliminary results from these tests are also discussed in Section 3 of this progress report.

  16. Power systems development facility. Quarterly technical progress report, July 1, 1994--September 30, 1994

    SciTech Connect

    1995-07-01

    The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the original Transport Reactor gas source and Hot Gas Cleanup Units: (1) Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. (2) Hot Gas Cleanup Units to mate to all gas streams. (3) Combustion Gas Turbine. (4) Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF).

  17. Solvent refined coal (SRC) process. Annual technical progress report, January 1979-December 1979

    SciTech Connect

    Not Available

    1980-11-01

    A set of statistically designed experiments was used to study the effects of several important operating variables on coal liquefaction product yield structures. These studies used a Continuous Stirred-Tank Reactor to provide a hydrodynamically well-defined system from which kinetic data could be extracted. An analysis of the data shows that product yield structures can be adequately represented by a correlative model. It was shown that second-order effects (interaction and squared terms) are necessary to provide a good model fit of the data throughout the range studied. Three reports were issued covering the SRC-II database and yields as functions of operating variables. The results agree well with the generally-held concepts of the SRC reaction process, i.e., liquid phase hydrogenolysis of liquid coal which is time-dependent, thermally activated, catalyzed by recycle ash, and reaction rate-controlled. Four reports were issued summarizing the comprehensive SRC reactor thermal response models and reporting the results of several studies made with the models. Analytical equipment for measuring SRC off-gas composition and simulated distillation of coal liquids and appropriate procedures have been established.

  18. Establishment of an Institute for Fusion Studies. Technical progress report, November 1, 1994--October 31, 1995

    SciTech Connect

    1995-07-01

    The Institute for Fusion Studies is a national center for theoretical fusion plasma physics research. Its purposes are to (1) conduct research on theoretical questions concerning the achievement of controlled fusion energy by means of magnetic confinement--including both fundamental problems of long-range significance, as well as shorter-term issues; (2) serve as a national and international center for information exchange by hosting exchange visits, conferences, and workshops; and (3) train students and postdoctoral research personnel for the fusion energy program and plasma physics research areas. During FY 1995, a number of significant scientific advances were achieved at the IFS, both in long-range fundamental problems as well as in near-term strategic issues, consistent with the Institute`s mandate. Examples of these achievements include, for example, tokamak edge physics, analytical and computational studies of ion-temperature-gradient-driven turbulent transport, alpha-particle-excited toroidal Alfven eigenmode nonlinear behavior, sophisticated simulations for the Numerical Tokamak Project, and a variety of non-tokamak and non-fusion basic plasma physics applications. Many of these projects were done in collaboration with scientists from other institutions. Research discoveries are briefly described in this report.

  19. Upgraded coal interest group. First quarterly technical progress report, October 1, 1994--December 31, 1994

    SciTech Connect

    Weber, W.; Lebowitz, H.E.

    1994-12-31

    The interest group got under way effective January 1, 1994, with nine utility members, EPRI, Bechtel, and the Illinois Clean Coal Institute. DOE participation was effective October 1, 1994. The first meeting was held on April 22, 1994 in Springfield, Illinois and the second meeting was held on August 10--11, 1994 at Johnstown, Pennsylvania. Technical reviews were prepared in several areas, including the following: status of low rank coal upgrading, advanced physical coal cleaning, organic sulfur removal from coal, handling of fine coal, combustion of coal water slurries. It was concluded that, for bituminous coals, processing of fines from coal cleaning plants or impoundments was going to be less costly than processing of coal, since the fines were intrinsically worth less and advanced upgrading technologies require fine coal. Penelec reported on benefits of NOX reductions when burning slurry fuels. Project work was authorized in the following areas: Availability of fines (CQ, Inc.), Engineering evaluations (Bechtel), and Evaluation of slurry formulation and combustion demonstrations (EER/MATS). The first project was completed.

  20. Jointly sponsored research program. Quarterly technical progress report, April--June, 1994

    SciTech Connect

    Not Available

    1994-10-01

    Objectives, accomplishments, procedures, and results are briefly described for each of the following 18 research projects: Development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; Wetting behavior of selected crude oil/brine/rock systems; Coal gasification, power generation, and product market study; The impact of leachate from Clean Coal Technology waste on the stability of clay liners; Investigation of coprocessing of heavy oil, automobile shredder residue, and coal; Injection into coal seams for simultaneous CO{sub 2} mitigation and enhanced recovery of coalbed methane; Optimization of carbonizer operations in the FMC Coke Process; Chemical sensor and field screening technology development; Demonstration of the Koppelman Series C Process using a batch test unit with Powder River Basin coal as feed; Remote chemical sensor development; Market assessment and technical feasibility study of PFBC ash use; Solid-state NMR analysis and interpretation of naturally and artificially matured kerogens; CROW{trademark} field demonstration with bell lumber and pole; ``B`` series pilot plant tests; In situ treatment of manufactured gas plant contaminated soils demonstration program; Development and demonstration of a wood-fired gas turbine system; NMR analysis of Mowry Formation shale from different sedimentary basins; and Acid-mine drainage prevention, control, and treatment technology development for the Stockett/Sand Coulee Area.

  1. West Hackberry Tertiary Project. Quarterly technical progress report, January 1, 1996--March 31, 1996

    SciTech Connect

    Gillham, T.; Cerveny, B.; Turek, E.

    1996-04-10

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility of combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoir for the project is the Camerina C-1,2,3 sand located on the West Flank of West Hackberry Field in Cameron Parish, Louisiana. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomic. The first quarter of 1996 was outstanding both in terms of volume of air injected and low cost operations. More air was injected during this quarter than in any preceding quarter. The compressors experienced much improved run time with minimal repairs. Low operating costs resulted from no repairs required for injection or production wells. A discussion of the following topics are contained herein: (1) performance summary for the injection and production wells, (2) air compressor operations, (3) updated bottom hole pressure data, (4) technology transfer activities and (5) plans for the upcoming quarter.

  2. Pipeline gas demonstration plant, Phase I. Quarterly technical progress report, December 1980-February 1981

    SciTech Connect

    Eby, R.J.

    1981-03-01

    Work was performed in the following areas of the Pipeline Gas Demonstration Plant Program: site evaluation and selection; demonstration plant environmental analysis; feedstock plans, licenses, permits and easements; demonstration plant definitive design; construction planning; economic reassessment; technical support; long lead procurement list; and project management. Major work activity continued to be the effort on Demonstration Plant Definitive Design. A Construction Readiness Audit was held on January 14 to 16, 1981 by a Government/Procon team to review the project and assess the readiness of the project to proceed into the construction phase. Documents for the 60% Design Review were prepared for ICGG review and submitted to the Contracting Officer's authorized representative prior to transmittal to the Corps of Engineers for review. The Corps of Engineers conducted a design audit. The primary objective of the audit was to prepare an independent estimate of the work remaining to complete Phase I of the project. Work continued on the production of a single bid package for the Demonstration Plant, suitable for release to a single constructor, and organized so it can be easily broken down into subpackages by construction specialty. A formal audit of the ICGG R/QA Plan and implementation thereof was performed February 11-12, 1981 by the Corps of Engineers. The Contract Deliverable Final Feedstock-Product-Waste Disposal Plan was delivered to the Government on February 25, 1981.

  3. Indiana University high energy physics, Task A. Technical progress report, April 1991--April 1992

    SciTech Connect

    Brabson, B.; Crittenden, R.; Dzierba, A.; Hanson, G.; Martin, H.; Marshall, T.; Mir, R.; Mouthy, T.; Ogren, H.; Rust, D.; Teige, S.; Zieminska, D.; Zieminski, A.

    1992-10-01

    During this reporting period the group has been carrying out programs in several areas. These are presented in this paper is follows: The group was a collaborator in the Mark II experiment at the SLC and completed analysis on the experiment. Three students completed their theses this reporting period; the group is the prime mover in (E672), a high mass dimuon experiment which now in its final data collection period. Our group is also a collaborator in the DO collider experiment which is now preparing for the first data run in 1992; the group is a collaborator in the OPAL experiment at LEP which is now taking data. The group also is working on the development of a major offline facility shift and on a silicon vertex chamber for 1993; the group is the prime mover in the construction of a major new experiment (E852) in precision meson spectroscopy. A test run is presently underway and data taking will begin in 1993; and the group is a prime mover in the tracking design of the SDC experiment. The SDC has completed the Technical Design report. Construction will begin in 1993.

  4. Savannah River Ecology Laboratory. Annual technical progress report of ecological research

    SciTech Connect

    Smith, M.H.

    1996-07-31

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA). The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts basic and applied ecological research, as well as education and outreach programs, under a contract with the U.S. Department of Energy (DOE) at the Savannah River Site (SRS) near Aiken, South Carolina. Significant accomplishments were made during the past year in the areas of research, education and service. The Laboratory`s research mission was fulfilled with the publication of two books and 143 journal articles and book chapters by faculty, technical and students, and visiting scientists. An additional three books and about 80 journal articles currently are in press. Faculty, technician and students presented 193 lectures, scientific presentations, and posters to colleges and universities, including minority institutions. Dr. J Vaun McArthur organized and conducted the Third Annual SREL Symposium on the Environment: New Concepts in Strewn Ecology: An Integrative Approach. Dr. Michael Newman conducted a 5-day course titled Quantitative Methods in Ecotoxicology, and Dr. Brian Teppen of The Advanced Analytical Center for Environmental Sciences (AACES) taught a 3-day short course titled Introduction to Molecular Modeling of Environmental Systems. Dr. I. Lehr Brisbin co-hosted a meeting of the Crocodile Special Interest Group. Dr. Rebecca Sharitz attended four symposia in Japan during May and June 1996 and conducted meetings of the Executive Committee and Board of the International Association for Ecology (ENTECOL).

  5. Recent Progress and Emerging Issues in Measuring and Modeling Biomass Burning Emissions

    NASA Astrophysics Data System (ADS)

    Yokelson, R. J.; Stockwell, C.; Veres, P. R.; Hatch, L. E.; Barsanti, K. C.; Simpson, I. J.; Blake, D. R.; Alvarado, M.; Kreidenweis, S. M.; Robinson, A. L.; Akagi, S. K.; McMeeking, G. R.; Stone, E.; Gilman, J.; Warneke, C.; Sedlacek, A. J.; Kleinman, L. I.

    2013-12-01

    . The detection rate for the sampled US prescribed fires was zero by burned area and <30% by active fire detection. Smoke evolution was measured for numerous gas-phase precursors and products, ozone, OA, ions, and BC and BrC mixing state. BC particles were coated within one hour and the smoke evolution was, in general, strongly impacted by the unidentified low volatility gases. An informative synthesis of lab and field fire data with fuels from the same sites was carried out. A preliminary comparison of wildfire and prescribed fire emissions will be presented. Novel schemes are under development to summarize the new emissions data for models, with limited mechanisms and parameterize fast, sub-grid processes. Key current issues to be discussed include: packaging/parameterizing the recent explosion of emissions/evolution data for use in model mechanisms; addressing fires not detected from space; addressing the large amount of unidentified semi-volatile gases emitted by all fires; and developing appropriate airborne and ground-based sampling scales/strategies for local-global models. We briefly summarize a recently funded project that will sample emissions and quantify biomass consumption by peat fires in Indonesia and a pending proposal for comprehensive sampling of cooking fires, brick kilns, garbage burning, diesel super-emitters, etc. in South Asia.

  6. Microsupercomputers: Design and implementation. Semi-annual technical progress report, November 1989-March 1990

    SciTech Connect

    Hennessy, J.L.; Horowitz, M.A.

    1990-03-01

    Executive Summary: (1) Parallel Processor Architecture -- The primary focus of our architecture effort has been on completing the design of DASH and starting the construction of the prototype; (2) Parallel Software -- We are building a compiler system that supports our research in a broad spectrum of topics, ranging from advanced scalar optimizations to parallel loop transformations and code scheduling for multiprocessors and superscalar processors; (3) Uniprocessor Architecture -- We have continued our work on investigating efficient methods of extracting the parallelism available at the lowest-level, by issuing multiple instruction per cycle; (4) Computer-Aided Design -- Recent research has been focusing on partitioning techniques at the behavioral-level of abstraction; (5) VLSI Design -- During this period we have continued our work in high-speed BiCMOS circuits.

  7. White goods recycling in the United States: Economic and technical issues in recovering, reclaiming, and reusing nonmetallic materials

    SciTech Connect

    Karvelas, D.E.; Jody, B.J.; Daniels, E.J.

    1995-02-01

    Obsolete white goods (appliances such as refrigerators, freezers, washers, dryers, ranges, dishwashers, water heaters, dehumidifiers, and air conditioners) contain significant quantities of recyclable materials, but because of economic and environmental concerns, only limited quantities of these scrap materials are currently being recycled. Appliances are manufactured from a mix of materials, such as metals, polymers, foam, and fiberglass; metals represent more than 75% of the total weight. Appliance recycling is driven primarily by the value of the steel in the appliances. Over the last 15 years, however, the use of polymers in appliance manufacturing has increased substantially at the expense of metals. The shift in the materials composition of appliances may threaten the economics of the use of obsolete appliances as a source for scrap metals. To increase the recycling of white goods, cost-effective and environmentally acceptable technologies must be developed to separate, recover, reclaim, and reuse polymers from discarded appliances. Argonne National Laboratory is currently conducting research, with industry support, to develop cost-effective processes and methods for recovering and reclaiming acrylonitrile butadiene-styrene and High-density polystyrene from discarded appliances. This collaborative research focuses on developing a combination of mechanical/physical and chemical separation methods for recovering and reusing these high-value plastics. In addition, cost-effective methods for improving the performance characteristics of the recovered plastics are being investigated with the goal of recycling these plastics to their original application. In this paper, we examine the technical and economic issues that affect the recycling of white goods and present results of Argonne`s white goods recycling research and development activities.

  8. Precombustion removal of hazardous air pollutant precursors. Technical progress report, October 1, 1995--December 31, 1995

    SciTech Connect

    1996-01-19

    This project involves the development of an optimized, bench-scale processing circuit capable of efficiently removing trace elements from, run-of-mine coals. The optimized circuit will be developed using characterization data obtained from detailed washability studies and release analyses tests conducted with several eastern U.S. coals. The optimized circuit will incorporate a variety of conventional and advanced coal cleaning processes which are believed to be the most cost-effective and commercially viable. The coal products from the optimized circuit will be further treated with complexing agents specifically designed to extract organometallic trace elements that are difficult to remove by physical cleaning operations. Finally, innovative bioremediation schemes will be investigated as a means of controlling the release of trace elements from the process waste streams. Emphasis has been placed on the development of a processing circuit which (1) maximizes the rejection of trace elements, (2) minimizes the production of coal fines which are costly to process and less marketable, and (3) minimizes the downstream impacts of the process waste streams on the environment. During the past quarter, the project work plan and all associated technical/management reports were successfully completed. In addition, three coal samples have been selected for use in the proposed test program based on input provided by the industrial project participants. Formal requests to ship the coal samples to the testing facility have also been made. Steps have also been undertaken to prepare the coal receiving areas for crushing, sizing and storing of the procured coals. Work is now under way to complete the coal acquisition and sample preparation activities and to initiate the proposed trace element characterization studies and bench-scale test work.

  9. Microsupercomputers: Design and implementation. Semi-annual technical progress report, April-October 1989

    SciTech Connect

    Hennessy, J.L.; Horowitz, M.A.

    1989-10-01

    1. Executive Summary. A summary of progress for the period April 1989 through October 1989 follows: (1) Parallel Architecture: The Stanford DASH multiprocessor advances the state of parallel computing by combining the programmability of shared-memory machines with the scalability of distributed-memory machines. (2) Parallel Software: We have developed a compiler algorithm that applies a large set of loop-level optimizations to improve data locality in programs. (3) Super-Scalar Design: We have investigated how much parallelism is available at the lowest level -- in the base instruction stream of a processor. (4) Multi-level Caches: The presence of a second-level cache can decrease the optimum size and cycle time of the first-level cache, and significantly improve performance beyond the best attainable with a single level of caching. (5) Testers: A single chip tester, called Testarossa, contains a dRAM for the test vector storage, a decompressor to increase the effective vector size, and the pin electronics for 16 DUT pins. (6) Computer Aided Design: In the area of algorithm and tool development for high-level synthesis we have targeted two goals: control generation for synthesized structures and relative scheduling techniques under timing constraints. (7) Simulation: The goal of this research is to provide application tools for the proposed scalable shared memory multiprocessor.

  10. [Recent technical research hot spots and development progresses in medical whole-body positron emission tomography].

    PubMed

    Shi, Han; Du, Dong; Su, Zhihong; Xu, Jianfeng; Zou, Yirong; Peng, Qiyu

    2015-02-01

    Medical whole-body positron emission tomography (PET), one of the most successful molecular imaging technologies, has been widely used in the fields of cancer diagnosis, cardiovascular disease diagnosis and cranial nerve study. But, on the other hand, the sensitivity, spatial resolution and signal-noise-ratio of the commercial medical whole-body PET systems still have some shortcomings and a great room for improvement. The sensitivity, spatial resolution and signal-noise-ratio of PET system are largely affected by the performances of the scintillators and the photo detectors. The design of a PET system is usually a trade-off in cost and performance. A better image quality can be achieved by optimizing and balancing the key components which affect the system performance the most without dramatically increases in cost. With the development of the scintillator, photo-detector and high speed electronic system, the performance of medical whole-body PET system would be dramatically improved. In this paper, we report current progresses and discuss future directions of the developments of technologies in medical whole-body PET system. PMID:25997296

  11. Advanced converter technology. Technical progress report, May 23, 1979-May 22, 1980

    SciTech Connect

    Banic, C. V.; Eckhouse, S. A.; Kornbrust, F. J.; Lipman, K.; Peterson, J. L.; Rosati, R. W.

    1980-01-01

    The overall objective of this program is to define an advanced converter system employing 1980's technology in all subsystem and component areas for use in electrochemical energy storage systems. Additional experimental effort will validate elements of the advanced commutation circuitry on a full-scale breadboard basis. Improved models of battery electrical characteristics are beng defined and experimental apparatus is being designed to measure these characteristics and to enable better definition of the battery-power conditioner interface. Improvement of energy-storage system performance through modification of battery converter characteristics will also be investigated. During this first year of the contract, a new more advanced concept for power conditioning based on a concept defined by United Technologies Corporation for fuel cell use was evaluated. This high switching frequency concept has the potential for significantly reducing the size and cost of battery plant power conditioners. As a result, the Department of Energy authorized redirection of the program to first evaluate this new concept and then to reorient the program to adopt this concept as the primary one. Progress is reported. (WHK)

  12. Biomass power for rural development. Technical progress report, April 1, 1997--June 30, 1997

    SciTech Connect

    Neuhauser, E.

    1997-08-01

    Detailed task progress reports and schedules are provided for the DOE/USDA sponsored Biomass Power for Rural Development project. The focus of the project is on developing commercial energy crops for power generation by the year 2000. The New York based Salix Consortium project is a multi-partner endeavor, implemented in three stages. Phase-I, Final Design and Project Development, will conclude with the preparation of construction and/or operating permits, feedstock production plans, and contracts ready for signature. Field trials of willow (Salix) have been initiated at several locations in New York (Tully, Lockport, King Ferry, La Fayette, Massena, and Himrod) and co-firing tests are underway at Greenidge Station (NYSEG) and Dunkirk Station (NMPC). Phase-H of the project will focus on scale-up of willow crop acreage, construction of co-firing facilities at Dunkirk Station (NMPC), and final modifications for Greenidge Station. Cofiring willow is also under consideration for GPU`s Seward Station where testing is under way. There will be an evaluation of the energy crop as part of the gasification trials occurring at BED`s McNeill power station. Phase-III will represent fullscale commercialization of the energy crop and power generation on a sustainable basis.

  13. Supramolecular structures for photochemical energy conversion. Technical progress report, 1993--1996

    SciTech Connect

    1996-06-01

    This research project is concerned with the design, synthesis and study by photochemical and spectroscopic methods of complex molecular devices that mimic some important aspects of photosynthetic electron and energy transfer. Properly engineered molecules of this type can functionally mimic photosynthetic light harvesting (singlet-singlet energy transfer between chromophores), photoprotection from light-initiated singlet oxygen damage (triplet-triplet energy transfer from chlorophylls to carotenoid polyenes), and, most importantly, photoinduced multistep electron transfer to generate charge-separated states that preserve some of the photon energy as chemical potential. During the last three years, progress has been made on several fronts, all of which are related to the overall goal. A biomimetic system based on carotenoid-porphyrin-quinone triads has been constructed that demonstrates photoinduced transmembrane charge separation which in turn drives transmembrane proton transfer. Another investigation has focused on the use of proton transfer reactions to stabilize the initial products of photoinduced electron transfer and thereby increase the yield of long-lived charge separation. A third study has investigated the influence of rigid molecular geometries and short donor-acceptor separations on photoinduced electron transfer reactions. Finally, generation and quenching of singlet molecular oxygen by chlorophyll aggregates has been studied. All four studies are described and results are discussed.

  14. Colorado School of Mines fusion gamma ray diagnostic project. Technical progress report

    SciTech Connect

    Cecil, F.E.

    1992-02-14

    This report summarizes the 1991 calendar year activities of the fusion gamma ray diagnostics project in the Physics Department at the Colorado School of Mines. Considerable progress has been realized in the fusion gamma ray diagnostic project in the last year. Specifically we have achieved the two major goals of the project as outlined in last year`s proposed work statement to the Office of Applied Plasma Physics in the DOE Division of Magnetic Fusion Energy. The two major goals were: (1) Solution of the severe interference problem encountered during the operation of the gamma ray spectrometer concurrent with high power levels of the neutral beam injectors (NBI) and the ICRH antenae. (2) Experimental determination of the absolute detection efficiency of the gamma ray spectrometer. This detection efficiency will allow the measured yields of the gamma rays to be converted to a total reaction rate. In addition to these two major accomplishments, we have continued, as permitted by the TFTR operating schedule, the observation of high energy gamma rays from the 3He(D,{gamma})5Li reaction during deuterium NBI heating of 3He plasmas.

  15. Coolside waste management research. Quarterly technical progress report, July 1, 1992--September 30, 1992

    SciTech Connect

    Not Available

    1992-12-31

    TCLP analysis of the Coolside pellets and Ottawa base sand materials were completed. The metal concentrations for the 8 RCRA metals were well below the trigger values with all but Ag and Se being below the drinking water standard levels. The initial and final pH values showed the sand had essentially no neutralization capacity while the neutralization capacity of the pilot plant materials was above the 0.7 meq/g upper level for use of extraction solution {number_sign}1 but well below the 2 meq/g upper level of the {number_sign}2 solution neutralization capacity. Complete metals analysis in addition to the RCRA metals are also reported. Complete metals, proximate, and ultimate analyses for the pilot plant test samples were completed. Sizable concentrations of calcium well above the Coolside samples were observed. Interpretation of these results are in progress. Monitoring of swell on Coolside solid waste samples compacted in CBR molds continued with no increase in swell being observed since the last reporting period. The permeability of a specimen remolded near 95% of standard dry density and optimum moisture content and aged at room temperature for 178 days was 1.72 {times} 10{sup {minus}6} cm/sec.

  16. Advanced thermally stable jet fuels: Technical progress report, July 1994--September 1994

    SciTech Connect

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1994-07-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 3 subtasks which are described: Pyrolysis of n-alkylbenzenes; Thermal decomposition of n-tetradecane in near-critical region; and Re-examining the effects of reactant and inert gas pressure on tetradecane pyrolysis--Effect of cold volume in batch reactor. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Investigation of the quantitative degradation chemistry of fuels, is subtask, Effects of high surface area activated carbon and decalin on thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Screening potential jet fuel stabilizers using the model compound dodecane; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, is subtask, Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels. 25 refs., 64 figs., 22 tabs.

  17. Biomass power for rural development. Technical progress report, January 1, 1997--March 31, 1997

    SciTech Connect

    Neuhauser, E.

    1997-08-01

    Detailed task progress reports and schedules are provided for the DOE/USDA sponsored Biomass Power for Rural Development project. The focus of the project is on developing commercial energy crops for power generation by the year 2000. The New York based Salix Consortium project is a multi-partner endeavor, implemented in three stages. Phase-1, Final Design and Project Development, will conclude with the preparation of construction and/or operating permits, feedstock production plans, and contracts ready for signature. Field trials of willow (Salix) have been initiated at several locations in New York (Tully, Lockport, King Ferry, La Fayette, Massena, and Himrod) and co-firing tests are underway at Greenidge Station (NYSEG) and Dunkirk Station (NMPC). Phase-II of the project will focus on scale-up of willow crop acreage, construction of co-firing facilities at Dunkirk Station (NMPC), and final modifications for Greenidge Station. Cofiring willow is also under consideration for GPU`s Seward Station where testing is under way. There will be an evaluation of the energy crop as part of the gasification trials occurring at BED`s McNeill power station. Phase-III will represent fullscale commercialization of the energy crop and power generation on a sustainable basis.

  18. Diffraction studies of the structure of glasses and liquids: Technical progress report

    SciTech Connect

    Moss, S.C.

    1989-01-01

    The Houston program on glasses and liquids has continued over the year with an expanded activity into vitreous TiO/sub 2/ and amorphous metals/quasicrystals. The modeling study of vitreous SiO/sub 2/ has been published and the study of amorphous melanin is well underway in-house. We have also begun some promising modeling work on the icosahedral glass model (IGM) for quasicrystals and have completed a preliminary study of epitaxial diamond crystal growth on the (111) silicon crystal surface (initially undertaken to study the expected ''amorphous'' diamond-like phase). The work on GLAD at the Argonne IPNS continues on schedule under the direction of Dr. David L. Price. The status of the Phase I instrument has been published and the Phase II development is underway with an evacuated flight path, additional detectors and a final data acquisition system in progress. It is our expectation that the final instrument will be the most advanced of its kind in the world for the study of a wide variety of problems in glasses, liquids and amorphous materials.

  19. Methyl chloride via oxyhydrochlorination of methane. Quarterly technical progress report No. 16, July 1995--September 1995

    SciTech Connect

    1996-03-01

    Continuous progress is being made toward the contract objectives in our attempt to produce {open_quotes}Methyl Chloride via Oxyhydrochlorination of Methane.{close_quotes} Specifically, gains have been achieved in Task 1.0 Catalyst Development and Separation Unit Operation Development and Task 4.0 PDU Startup. Catalyst development continued forward to examine the copper, lanthanum, and lithium loadings as well as support surface area in four factor, two level, fully crossed design experiments carried out at five temperatures between 290{degrees}C and 310{degrees}C. Eight of the sixteen runs have been completed. Evaluation of these runs as a three factor, two level, fully crossed experiment has yielded some useful information. The choice of the Cu/La/Li metals system has been confirmed, and the high Cu, low La, low Li system hasn`t proven itself to be the most active at this point. Chemical feeds were brought on-line to the PDU. Small amounts of methyl chloride were made before the system was shut down due to equipment failure. Glass-lined equipment was found to be failing due to chemical etching. Replacement equipment with other materials of construction have been ordered. In addition, the FTIR windows clouded soon after chemical feeds were started. This materials problem is also being investigated.

  20. MHD Coal-Fired Flow Facility. Quarterly/annual technical progress report, October-December 1979

    SciTech Connect

    Dicks, J. B.; Chapman, J. N.; Crawford, L. W.

    1980-02-01

    In this Fourth Quarterly/Annual Report submitted under DOE contracts EX-76-C-01-1760 and DE-AC02-79ET10815, the University of Tennessee Space Institute (UTSI) reports on significant activity, task status, planned research, testing, and development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Research and Development Laboratory. Work on the CFFF progressed with only minor problems. Total construction activity for all site work presently awarded is nearly 98% complete. Water analysis shows that Woods Reservoir baseline conditions are within EPA or Tennessee drinking water standards. For the primary combustor, the vitiation heater and primary combustor fabrication drawings were completed and the nozzle design was completed. The drum module for the radiant slagging furnace was awarded. On the MHD Power Generator, development continued in several areas of advanced analysis including development of time-dependent models for use with the one-dimensional code. For seed regeneration, the tentative determination is that the Tomlinson Tampella is the most economically viable method. With regard to capped electrode erosion, investigations have shown that the major degradation of the cladding still present is at the leading edge of the capped anode. To alleviate this, plans are to hot work the noble metal in the bending operation. In resolving another problem, a system employing the modified line-reversal method has been assembled and successfully tested to measure absolute plasma temperatures.

  1. MHD Coal Fired Flow Facility. Quarterly technical progress report, July-September 1980

    SciTech Connect

    Altstatt, M. C.; Attig, R. C.; Brosnan, D. A.

    1980-11-01

    Significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Energy Conversion Facility (ECF) are described. On Task 1, the first phase of the downstream quench system was completed. On Task 2, all three combustor sections were completed, hydrotested, ASME code stamped, and delivered to UTSI. The nozzle was also delivered. Fabrication of support stands and cooling water manifolds for the combustor and vitiation heater were completed, heat transfer and thermal stress analysis, along with design development, were conducted on the generator and radiant furnace and secondary combustor installation progressed as planned. Under Task 3 an Elemental Analyzer and Atomic Absorption Spectrophotometer/Graphite Furnace were received and installed, sites were prepared for two air monitoring stations, phytoplankton analysis began, and foliage and soil sampling was conducted using all study plots. Some 288 soil samples were combined to make 72 samples which were analyzed. Also, approval was granted to dispose of MHD flyash and slag at the Franklin County landfill. Task 4 effort consisted of completing all component test plans, and establishing the capability of displaying experimental data in graphical format. Under Task 7, a preliminary testing program for critical monitoring of the local current and voltage non-uniformities in the generator electrodes was outlined, electrode metal wear characteristics were documented, boron nitride/refrasil composite interelectrode sealing was improved, and several refractories for downstream MHD applications were evaluated with promising results.

  2. Plasma physics research. Technical progress report, 1 February 1979-30 September 1980

    SciTech Connect

    1980-01-01

    Progress during the 20-month period, Feburary 1, 1979 to September 30, 1980 on the University of Wisconsin Plasma Physics contract is described. Most of the work centers around two large experimental devices, the Levitated Octupole and Tokapole II. A major upgrade of the Octupole was begun to include 1.8 MW of neutral beam heating and 2 MW of ICRH. Meanwhile, gun optimization and low field operation has resulted in the attainment of 35% beta, a factor of 9 above the single fluid ballooning limit. The Tokapole has operated reliably for the past two years and has been used to study axisymmetric instability of dee, inverse dee, and square shaped plasmas. Low q (approx. 0.6) discharges with flat current profiles are obtained. ICRF heating studies were brought to a conclusion. The device is presently being used to study Alfven wave heating, ECRH startup, poloidal ohmic heating, and plasma ohmic heating, and plasma surface interactions. Smaller efforts on divertor simulation and plasma potential studies in a single ring device and plasma theory are also described.

  3. Rawlins UCG Demonstration Project. Final technical progress report, May 10, 1988--August 9, 1988

    SciTech Connect

    Not Available

    1988-11-30

    The US Department of Energy and Energy International, Inc. have entered into a Cooperative Agreement to conduct a cost-shared field test demonstrating the operation of commercial-scale steeply dipping bed underground coal gasification (UCG) modules to provide the synthesis gas for a small-scale commercial ammonia plant. The field test and the commercial ammonia plant will be located near Rawlins, Wyoming. During this demonstration test, two or more modules will be operated simultaneously until one module is completely consumed and an additional module is brought on line. During this period, the average coal gasification rate will be between 500 and 1,200 tons per day. A portion of the raw UCC product gas. The UCG facility will continue to operate subsequent. to the demonstration to provide feedstock for the commercial plant. Energy International is responsible for accomplishing specific objectives in accordance with the Statement of Work by designing, installing, operating and monitoring the performance of the UCG modules as the feedstock source for the small-scale commercial ammonia plant. During this period, the project activities focused on project structuring, financing, and project management activities. Because the negotiations with investors were not completed on the schedule anticipated, adjustment of the schedule and activities was necessary. All major activities requiring the expenditure of funds were halted and work was suspended pending the availability of funds and new schedules. These changes have dictated the level of progress or delays for all of the tasks of the project throughout the period of this report.

  4. Capillary electrokinetic separations with optical detection. Technical progress report, February 1, 1993--January 31, 1994

    SciTech Connect

    Sepaniak, M.J.

    1993-10-01

    This program seeks the development of capillary electrokinetic separation techniques and associated optical methods of detection. Fundamental studies of pertinent separation and band broadening mechanisms are being conducted, with the emphasis on understanding systems that include highly-ordered assemblies as running buffer additives. The additives include cyclodextrins, affinity reagents, and soluble (entangled) polymers and are employed with capillary electrophoresis, CE and/or micellar electrokinetic capillary chromatography, MECC modes of separation. The utility of molecular modeling techniques for predicting the effects of highly ordered assemblies on the retention behavior of isomeric compounds is under investigation. The feasibility of performing separations using a non-aqueous solvent/fullerene electrochromatographic system is being explored. The analytical methodologies associated with these capillary separation techniques are being advanced through the development of retention programming instumentation/techniques and new strategies for performing optical detection. The advantages of laser fluorimetry are extended through the inclusion of fluorogenic, reagents in the running buffer. These reagents include oligonucleotide intercalation reagents for detecting DNA fragments. Chemiluminescence detection using post-capillary reactors/flow cells is also in progress. Successful development of these separation and detection systems will fill current voids in the capabilities of capillary separation techniques.

  5. Great Basin paleoenvironmental studies project; Technical progress report: Fourth quarter, March--May, 1994

    SciTech Connect

    1994-07-01

    Examination of the paleoenvironmental and geomorphic records to determine the local and regional impact of past climates will advance the assessment of Yucca Mountain`s suitability as a high-level nuclear waste repository. Paleobotanical studies will reconstruct the response of vegetation to climate change at the community and the organismal levels in order to identify periods of mesic climate at Yucca Mountain and the adjacent region during the last 20,000 to 50,000 years. Constructing a history of Great Basin vertebrates, particularly mammals, will provide empirical evidence of past environmental and climatic conditions within the Great Basin. The objective of the geomorphology component of the program is to document the responses of surficial processes and landforms to the climatic changes documented by studies of packrat middens, pollens, and faunal distributions. The goal of the transportation component is to compare the results from three models (FESWMS-2DH, DAMBRK, and FLO-2D) that have been suggested as appropriate for evaluating flood flows on alluvial fans with the results obtained from the traditional one-dimensional, stochastic model used in previous research for the Yucca Mountain Project. Progress on all these tasks is described.

  6. Amorphous silicon research: Phase II. Annual technical progress report, August 1, 1995--July 31, 1996

    SciTech Connect

    Guha, S

    1996-10-01

    This report describes the research performed during Phase II of a three-phase, three-year program under NREL Subcontract No. ZAN-4-13318-02. The research program is intended to expand, enhance and accelerate knowledge and capabilities for the development of high-performance, two-terminal multijunction hydrogenated amorphous silicon (a-Si:H) alloy modules. It is now well recognized that a multifunction, multibandgap approach has the potential of achieving the highest stable efficiency in a-Si:H alloy solar cells. In this approach, the bandgap of the materials of the component cell is varied in order to capture a wide spectrum of the solar photons. Significant progress has been made in the development of materials and cell design in the last few years, and a stable module efficiency of 10.2% has been demonstrated over one-square-foot area using a triple-junction approach in which the bottom two component cells use hydrogenated amorphous silicon-germanium (a-SiGe:H) alloy. In order to meet the Department of Energy goal of achievement of 12% stable module efficiency, it is necessary to make further improvements in each of the component cells. This has been the thrust of the current program.

  7. Methyl chloride via oxyhydrochlorination of methane. Quarterly technical progress report No. 11, April--June 1994

    SciTech Connect

    1994-11-01

    The purpose of this contract is to develop a process for converting light alkane gases to methyl chloride via oxyhydrochlorination using highly selective, stable catalysts in fixed-bed reactors designed to remove the large amount of heat generated, so as to control the reaction temperature. Further, the objective is to obtain the engineering data base necessary for developing a commercially feasible process and to evaluate the economics of the process. Significant progress was made in catalyst and PDU development this quarter. The key points of these developments are: Initial discussions have taken place with a catalyst supplier. United Catalysts, Inc. UCI came up with some good catalyst development suggestions and has agreed to produce a batch of catalyst for the PDU; previous plans for supply of methane for the PDU have fallen through. New options. including getting gas from Carrollton Utilities, are being evaluated; and PDU equipment installation is completed. and piping is 40% complete. The electrical work is close to being finished, and the instrumentation is underway.

  8. Technical progress report during Phase 1 of the continuous fiber ceramic composites program

    SciTech Connect

    Richerson, D.W.

    1994-03-15

    United States industry has a critical need for materials that are lightweight, strong, tough, corrosion resistant and capable of performing at high temperatures; such materials will enable substantial increase in energy efficiency and reduction in emissions of pollutants. Continuous fiber ceramic composites (CFCCs) are an emerging class of materials which have the potential for the desired combination of properties to meet the industrial needs. A $10 billion annual market has been estimated for CFCC products by the year 2010, which equates to over 100,000 industrial sector jobs. The CFCC program began in the spring of 1992 as a three-phase 10-year effort to assess potential applications of CFCC materials, develop the necessary supporting technologies to design, analyze and test CFCC materials, conduct materials and process development guided by the applications assessment input, fabricate test samples and representative components to evaluate CFCC material capabilities under application conditions, and analyze scaleability and manufacturability plus demonstrate pilot-scale production engineering. DOE awarded 10 Phase I cooperative agreements to industry-lead teams plus identified generic supporting technology projects. This document highlights the broad progress and accomplishments on these contracts and support technology projects during Phase I.

  9. Spectroscopy, reaction, and photodissociation in highly vibrationally excited molecules. Technical progress report

    SciTech Connect

    Not Available

    1991-12-31

    Highly vibrationally excited molecules often control the course of chemical reactions in the atmosphere, combustion, plasmas, and many other environments. The research described in this Progress Report uses laser excitation and interrogation techniques to study and control the dynamics of highly vibrationally excited molecules. In particular, they show that it is possible to unravel the details and influence the course of photodissociation and bimolecular reaction. The experiments use laser excitation of overtone vibrations to prepare highly vibrationally excited molecules, frequently with single quantum state resolution, and laser spectroscopy to monitor the subsequent behavior of the excited molecule. We have studied the vibrationally mediated photodissociation and the bond- and state-selected bimolecular reaction of highly vibrationally excited molecules. In the first process, one photon creates a highly excited molecule, a second photon from another laser dissociates it, and light from a third laser detects the population of individual product quantum states. This approach allows us to explore otherwise inaccessible regions of the ground and excited state potential energy surface and, by exciting to the proper regions of the surface, to control the breaking of a selected chemical bond. In the second process, the highly vibrationally excited molecule reacts with an atom formed either in a microwave discharge or by photolysis and another laser interrogates the products. We have used this approach to demonstrate mode- and bond-selected bimolecular reactions in which the initial excitation controls the subsequent chemistry. 30 refs., 8 figs.

  10. Progress in digestive endoscopy: Flexible Spectral Imaging Colour Enhancement (FICE)-technical review

    PubMed Central

    Negreanu, L; Preda, CM; Ionescu, D; Ferechide, D

    2015-01-01

    Background. A substantial advance in digestive endoscopy that has been made during the last decade is represented by digital chromoendoscopy, which was developed as a quicker and sometimes better alternative to the gold standard of dye spraying. Fujifilm developed a virtual coloration technique called Flexible spectral Imaging Color Enhancement (FICE). FICE provides a better detection of lesions of “minimal” esophagitis, of dysplasia in Barrett’s esophagus and of squamous cell esophageal cancer. The use of FICE resulted in an improvement in the visualization of the early gastric cancer, being less invasive, and time consuming than the classic dye methods. Current evidence does not support FICE for screening purposes in colon cancer but it definitely improves characterization of colonic lesions. Its use in inflammatory bowel disease is still controversial and in video capsule endoscopy is considered a substantial progress. Conclusions. The use of FICE endoscopy in routine clinical practice can increase the diagnostic yield and can provide a better characterization of lesions. Future studies to validate its use, the good choice of channels, and the “perfect indications” and to provide common definitions and classifications are necessary. PMID:26664462

  11. Great Basin paleoenvironmental studies project; Technical progress report, second quarter, September--November, 1993

    SciTech Connect

    1993-12-31

    Progress is described in the four tasks associated with this project. Task 1, Paleobotanical studies in the Great Basin, has as its objective the reconstruction of the response of vegetation to climate in order to identify periods of mesic climate at Yucca Mountain during the last 20,000 to 50,000 years. Past extremes in infiltration rates are expected to serve as estimates of climate that may be expected during the next 10,000 years at Yucca Mtn. Task 2, Paleofaunas, will construct a history of Great Basin vertebrates that will provide empirical evidence of past environmental and climatic conditions. The objective of Task 3, Geomorphology, is to document the responses of surficial processes and landforms to the climatic changes documented by studies of packrat middens, pollen, and faunal distributions. The goal of Task 4, Transportation, is to compare the results from three models that have been suggested as appropriate for evaluating flood flows on alluvial fans with the results obtained from the traditional one-dimensional, stochastic model used in previous research for Yucca Mountain. This research looked at three alluvial fans with rail transportation alignments crossing them.

  12. University of Tennessee Space Institute. Quarterly technical progress report, April-June 1983

    SciTech Connect

    Not Available

    1984-05-01

    The major activities discussed in this quarterly report are concerned with the initiation of testing in the DOE Coal Fired Flow Facility in the LMF1D test series. This test series is designed to provide basic data on seed/slag interaction as a function of diffuser exit temperature and slag carryover rate for the coal fired MHD system with slag screen installed. During the quarter two shakedown tests and three tests in the test series were conducted. Data is reported on the flow train performance, including the combustor, the slag screen, radiant furnace and the materials test module. Analysis of data from the LMF1C test series continues and a summary of the NO/sub x/ data analysis is provided. A summary of the results of application of advanced diagnostic equipment provided by UTSI, Mississippi State University and the Babcock and Wilcox Company is included. In Task 2 the arrival on site of the low temperature air heater is reported. A progress report on the procurement, engineering and installation of the superheater components is included.

  13. Moving finite elements in 2-D. Technical progress report, year 3

    SciTech Connect

    Gelinas, R.J.

    1984-04-03

    The moving finite element (MFE) method has emerged as a potentially potent and interesting method for solving partial differential equations (PDE's) with large gradients. The principal feature of the MFE method is that the grid node co-ordinates, themselves, are dependent variables and are calculated at each time step so as to minimize a PDE residual in some norm. This has the effect of moving the grid nodes continuously and systematically to those positions which minimize PDE numerical solution errors. Research on the MFE method to this time has been advanced by a relatively small number of groups and individual investigators. Of these, the presently proposing group at Science Applications, Inc. (SAI), in Pleasanton, California, has pursued simultaneously developments of the basic theory, numerical analysis, and real-world applications under sponsorship of the DOE and others. The results of our MFE research to date in both 1-D and 2-D transient PDE systems have been quite positive, as well as laden with indicators for further advancements. We report the progress of this third year of 2-D MFE research and indicate those research tasks which should now be pursued into their next logical stages of advancement for large-gradient PDE problems in 2-D.

  14. Exploratory research on solvent refined coal liquefaction. Annual technical progress report, January 1-December 31, 1979

    SciTech Connect

    1980-09-01

    This report summarizes the progress of the Exploratory Research on Solvent Refined Coal Liquefaction project by The Pittsburg and Midway Coal Mining Co.'s Merriam Laboratory during 1979. In a series of experiments with varying feed gas composition, low levels (5 to 10 mole %) of carbon monoxide had little effect on the SRC II processing of Pittsburgh Seam coal (Powhatan No. 5 Mine) while higher levels (20 to 40 mole %) resulted in a general degradation of operability and reduced oil yields. Addition of finely divided (approx. 1 ..mu..m) pyrite to the reactive Powhatan coal had little effect on oil yields although the molecular weight of the distillation residue was apparently decreased. When finely divided pyrite and magnetite were added to the less reactive coals from the Loveridge and Blacksville No. 1 Mines (also Pittsburgh Seam), however, substantial increases in oil yields and product quality were obtained. In a comparison of upflow and downflow dissolver configurations with Powhatan coal in the SRC II mode, there was no difference in yields or product quality. A study characterizing specific reactors revealed a significantly higher conversion in the SRC I mode with a reactor approximating plug flow conditions compared to a completely backmixed reactor. In the SRC II mode there was only a slightly higher oil yield with the plug flow reactor.

  15. Aligning Mathematics Assessment Standards: Oklahoma and the 2009 National Assessment of Educational Progress (NAEP). REL Technical Brief. REL 2008-No. 010

    ERIC Educational Resources Information Center

    Shapley, Kathy L.; Brite, Jessica

    2008-01-01

    This technical brief examines the current alignment between Oklahoma Core Curriculum Tests (OCT) and the 2009 National Assessment of Educational Progress (NAPE) mathematics framework. It looks at the extent to which current state assessment standards cover the content on which 2009 NAPE assessments will be based. Applying the methodology used by…

  16. The Development of Early Literacy Measures for Use in a Progress Monitoring Assessment System: Letter Names, Letter Sounds and Phoneme Segmenting. Technical Report # 39

    ERIC Educational Resources Information Center

    Alonzo, Julie; Tindal, Gerald

    2007-01-01

    In this technical report, the authors describe the development alternate forms of three types of early literacy measures as part of a comprehensive progress monitoring literacy assessment system developed in 2006 for use with students in Kindergarten through fourth grade. They begin with a brief overview of the two conceptual frameworks underlying…

  17. Bed material agglomeration during fluidized bed combustion. Technical progress report, January 1, 1993--March 31, 1993

    SciTech Connect

    Brown, R.C.; Dawson, M.R.; Noble, S.D.

    1993-04-01

    The purpose of this project is to determine the physical and chemical reactions which lead to the undesired agglomeration of bed material during fluidized bed combustion and to relate these reactions to specific causes. A survey of agglomeration and deposit formation in industrial fluidized bed boilers is in progress. Preliminary results indicate that at least five boilers were experiencing some form of bed material agglomeration. In these instances it was observed that large particles were forming within the bed which were larger that the feed. Four operators could confirm that the larger bed particles had formed due to bed particles sticking together or agglomerating. Deposit formation was reported at nine sites with these deposits being found most commonly at coal feed locations and in cyclones. Other deposit locations included side walls and return loops. Examples of these agglomerates and deposits have been received from five of the surveyed facilities. Also during this quarter, a bulk sample of Illinois No. 6 coal was obtained from the Fossil Energy Program at Ames Laboratory here at Iowa State University and prepared for combustion tests. This sample was first ground to a top-size of 3/8`` using a jaw crusher then a size fraction of 3/8`` {times} 8 (US mesh) was then obtained by sieving using a Gilson Test-Master. This size fraction was selected for the preliminary laboratory-scale experiments designed to simulate the dense bed conditions that exist in the bottom of CFB combustors. To ensure uniformity of fuel composition among combustion runs, the sized coal was riffled using, a cone and long row method and stored in bags for each experiment. During this quarter additional modifications were made to achieve better control of fluidization regimes and to aid in monitoring the hydrodynamic and chemical conditions within the reactor.

  18. Development of hydroconversion of biomass to synthetic fuels. Technical progress report, October 1-December 31, 1980

    SciTech Connect

    1981-04-01

    The physical and chemical characterization tests with maple hardwood were completed. Corn stover tests are in progress. The maple hardwood had uniform properties for various size fractions unlike the Douglas fir hog fuel. The ash fusion temperatures for maple hardwood were measured up to 2700/sup 0/F, which is significantly higher than those for coal ash. Studies were conducted to determine the fluidized behavior of mixtures of sand and 5 to 67 vol % of char. Measurements of the bed pressure drop and fluidizing gas velocity were made at several bed heights. At fluidization gas velocities below that of pure sand, the sand provided smooth fluidization and good mixing with the larger, lower density char particles. Drying aspects of maple were examined in terms of front-end drying that will use recovered waste heat. This is important because a constant-moisture feedstock is preferred. Initial thermobalance tests of low-temperature drying typical of front-end, recovered-heat systems were conducted. Linear, well-defined behavior was found for moisture loss in time. Nonisothermal thermobalance runs were made to define temperatures where significant reactions occur and to establish if there is any effect of particle size. Rapid heat-up rate devolatilization of maple hardwood was studied in a free-fall apparatus able to feed and collect large quantities (g/min) of material. Greater than 75% conversion was obtained in less than 0.3 second, and higher hydrogen pressure increased the light hydrocarbon product yield. Isothermal thermobalance experiments were conducted to establish the kinetics of the steam-char reaction. A first-order kinetic model was developed. Further work involved a confirmation of the PDU design values in terms of the information developed in the above work. Additional PDU design details were completed.

  19. Improved methods for water shutoff. Final technical progress report, October 1, 1997--September 30, 1998

    SciTech Connect

    Seright, R.S.; Liang, J.T.; Schrader, R.; Hagstrom, J. II; Liu, J.; Wavrik, K.

    1998-10-01

    In the United States, more than 20 billion barrels of salt water are produced each year during oilfield operations. A tremendous economic incentive exists to reduce water production if that can be accomplished without significantly sacrificing hydrocarbon production. This three-year research project had three objectives. The first objective was to identify chemical blocking agents that will (a) during placement, flow readily through fractures without penetrating significantly into porous rock and with screening out or developing excessive pressure gradients and (b) at a predictable and controllable time, become immobile and resistant breakdown upon exposure to moderate to high pressure gradients. The second objective was to identify schemes that optimize placement of the above blocking agents. The third objective was to explain why gels and other chemical blocking agents reduce permeability to one phase (e.g., water) more than that to another phase (e.g., oil or gas). The authors also wanted to identify conditions that maximize this phenomenon. This project consisted of three tasks, each of which addressed one of the above objectives. This report describes work performed during the third and final period of the project. During this three-year project, they: (1) Developed a procedure and software for sizing gelant treatments in hydraulically fractured production wells; (2) Developed a method (based on interwell tracer results) to determine the potential for applying gel treatments in naturally fractured reservoirs; (3) Characterized gel properties during extrusion through fractures; (4) Developed a method to predict gel placement in naturally fractured reservoirs; (5) Made progress in elucidating the mechanism for why some gels can reduce permeability to water more than that to oil; (6) Demonstrated the limitations of using water/oil ratio diagnostic plots to distinguish between channeling and coning; and (7) Proposed a philosophy for diagnosing and attacking water

  20. Surface properties of photo-oxidized bituminous coals. Technical progress report, January--March 1996

    SciTech Connect

    Mitchell, G.; Davis, A.; Chander, S.

    1996-12-31

    During this report period, a vitrinite concentrate from the mvb Splash Dam seam (DECS-30) was prepared and analyzed. Results show that the concentrate was 91 vol % vitrinite and that the sample has been adequately protected from oxidation under refrigerated storage in argon. The 9% level of contamination within the vitrinite resulted from the extreme friability of the coal and to the dispersion of fine grains of semifusinite and micrinite. Polished blocks containing vitrain bands that were prepared, irradiated in blue-light and employed in contact angle measurements were evaluated using specular reflectance-mode FT-IR for changes in functional group chemistry. Infrared spectra from unexposed areas of vitrinite and those irradiated for 1, 5 and 10 min for six coals ranging in rank from hvCb to mvb were obtained using a FTS 175 spectrometer with a Bio-Rad UMA 500 microscope accessory. Preliminary results demonstrate that photo-oxidation occurred during irradiation, becoming progressively more intense with increasing irradiation time; however, the magnitude of this change diminished with increasing rank. A relatively steady increase in the carbonyl region (1,800--1,650 cm{sup {minus}1}) and a decrease in the aliphatic region (2,950--2,850 cm{sup {minus}1}) of the spectra supports this observation and is similar to observations made in the past for natural weathering and laboratory oxidation of coals. A series of tests was initiated to photo-oxidize powdered vitrains using the BLAK-RAY ultraviolet lamp evaluated last quarter. Samples of four vitrinite concentrates were exposed to UV light for 10 mins per side. These and the corresponding whole-seam channel samples and raw vitrinite concentrates were submitted for initial microflotation tests which have not been completed at this time.

  1. Robotic weld overlay coatings for erosion control. Quarterly technical progress report, July--September, 1994

    SciTech Connect

    Levin, B.F.; Dupont, J.N.; Marder, A.R.

    1994-10-26

    Research is presently being conducted to develop a criteria for selecting weld overlay coatings for erosion mitigation in Circulated Fluidized Beds. Initially, eleven weld overlay alloys were selected for erosion testing based upon a literature review. All eleven coatings were deposited on 1018 steel substrates using the plasma arc welding process. Ten samples from each coating were prepared for erosion testing. All selected coatings were erosion tested at 400 C and their erosion resistance was evaluated by determining the steady state erosion rate. In addition, the microstructure of each coating was characterized before and after the erosion tests. No correlations were found between room temperature hardness of the weld overlay coatings and their erosion resistance at elevated temperature. It was suggested that weld overlays mechanical properties such as fracture strength, toughness and work hardening rates may contributed to their erosion resistance. During the previous two quarters the microhardness tests were performed on the eroded samples in order to determine the size of the work hardened zone and the change in the coatings hardness due to erosion. As a result of these measurements it was established that one group of coatings deformed plastically, while another did not. In addition, the measurements of the weld overlays microhardness at 400 C were made. The coatings microhardness at 400 C was plotted versus their volume erosion rates. During the last quarter, erosion tests were performed for Inconel-625, 316L SS, and Iron-Aluminide wrought alloys in order to compare their erosion behavior with similar weld overlays. The results of microhardness profile measurements for all weld overlay coatings were analyzed. The factors that contribute to the erosion resistance of the coatings that deformed plastically are discussed in this progress report.

  2. Solvent refined coal (SRC) process. Quarterly technical progress report, January 1980-March 1980. [In process streams

    SciTech Connect

    Not Available

    1981-01-01

    This report summarizes the progress of the Solvent Refined Coal (SRC) project at the SRC Pilot Plant in Fort Lewis, Wahsington, and the Process Development Unit (P-99) in Harmarville, Pennsylvania. After the remaining runs of the slurry preheater survey test program were completed January 14, the Fort Lewis Pilot Plant was shut down to inspect Slurry Preheater B and to insulate the coil for future testing at higher rates of heat flux. Radiographic inspection of the coil showed that the welds at the pressure taps and the immersion thermowells did not meet design specifications. Slurry Preheater A was used during the first 12 days of February while weld repairs and modifications to Slurry Preheater B were completed. Two attempts to complete a material balance run on Powhatan No. 6 Mine coal were attempted but neither was successful. Slurry Preheater B was in service the remainder of the quarter. The start of a series of runs at higher heat flux was delayed because of plugging in both the slurry and the hydrogen flow metering systems. Three baseline runs and three slurry runs of the high heat flux program were completed before the plant was shut down March 12 for repair of the Inert Gas Unit. Attempts to complete a fourth slurry run at high heat flux were unsuccessful because of problems with the coal feed handling and the vortex mix systems. Process Development Unit (P-99) completed three of the four runs designed to study the effect of dissolver L/D ratio. The fourth was under way at the end of the period. SRC yield correlations have been developed that include coal properties as independent variables. A preliminary ranking of coals according to their reactivity in PDU P-99 has been made. Techniques for studying coking phenomenona are now in place.

  3. Technical Progress Report for PEPCO: Turbo-Z Battery Charging System

    SciTech Connect

    1999-07-22

    The authors are entering the final phase of development for this project. Work has been imparted to define the components of the flexible battery charger control board. Detailed analog and digital circuits are complete. Improved analog to digital and digital to analog converters have been selected for use with the control board. The control board schematics are complete and construction of the hardware is in progress. The programming of the circuit board modules is underway. The documentation and circuit schematic drawings are in process. The test stand has added the integration of a dedicated fast computer/microprocessor to control the test stand. This will allow measurements to be taken and recorded more often. This has required modification of the software. The software is being debugged. The modules to be controlled by the test stand microprocessor include the charger module, the battery simulator, the discharge pulse, and discharger. Integrating these components will greatly enhance design and testing. An SCR charger power module has been has been designed, built, and debugged. The circuits for the battery simulator and discharge pulse have been detailed and debugged. The discharge pulse characteristics have been defined and designed. The charger power and discharge pulse modules can be used with either the test stand or the flexible control board. This work is the result of extensive catalog and internet research for the test stand and control board components. The documentation for the project is underway. It is important to have this documentation for reference purposes. Also, the drawing schematics will help with future projects, and they will help with flow-charting the projects for all parties involved. The drawings and some output parameters as of June 1999 are attached.

  4. Advanced thermally stable jet fuels: Technical progress report, October 1994--December 1994

    SciTech Connect

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1995-02-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 5 subtasks which are described: Literature review on thermal stability of jet fuels; Pyrolytic and catalytic reactions of potential endothermic fuels: cis- and trans-decalin; Use of site specific {sup 13}C-labeling to examine the thermal stressing of 1-phenylhexane: A case study for the determination of reaction kinetics in complex fuel mixtures versus model compound studies; Estimation of critical temperatures of jet fuels; and Surface effects on deposit formation in a flow reactor system. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Characterization of solid gums, sediments, and carbonaceous deposits, is subtask, Studies of surface chemistry of PX-21 activated carbon during thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Exploratory screening and development potential of jet fuel thermal stabilizers over 400 C; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, are 4 subtasks: Novel approaches to low-severity coal liquefaction and coal/resid co-processing using water and dispersed catalysts; Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels; Design of a batch mode and a continuous mode three-phase reactor system for the liquefaction of coal and upgrading of coal liquids; and Exploratory studies on coal liquids upgrading using mesopores molecular sieve catalysts. 136 refs., 69 figs., 24 tabs.

  5. Pathways to genetic screening: Patient knowledges, Patient practices. Technical report of research progress

    SciTech Connect

    Not Available

    1994-08-29

    This study is designed to clarify the integration of genetic knowledge into the lived experience of high-risk family members. A major focus is elucidation of the social and cultural barriers and bridges to the use of genetic information to increase reproductive options and improve the quality of family life. They study focuses on families at risk for cystic fibrosis and sickle cell disease. These two disease groups were selected because they are among the most common potentially lethal genetic diseases and because while each has a similar pattern of inheritance and raises similarly serious bio-medical challenges and issues of information management, they primarily affect different racial and ethno-cultural groups permitting a naturally occurring experiment. In the variable penetration and meaning of genetic medicine in two populations. We have conducted intensive interviews with more than 300 individuals in approximately 88 families. We have attempted to balance the effort equally between the two groups, but have found we are able to penetrate the family systems of the cystic fibrosis families more easily than the sickle cell families.

  6. Biomass power for rural development. Technical progress report, Phase 2, July 1--September 30, 1998

    SciTech Connect

    Neuhauser, E.

    1999-01-01

    The project undertaken by the Salix Consortium is a multi-phased, multi-partner endeavor. Phase 1 focused on initial development and testing of the technology and forging the necessary agreements to demonstrate commercial willow production. The Phase 1 objectives have been successfully completed: preparing final design plans for two utility pulverized coal boiler for 20 MW of biopower capacity; developing fuel supply plans for the project with a goal of establishing 365 ha (900 ac) of willow; obtaining power production commitments from the power companies for Phase 2; obtaining construction and environmental permits; and developing an experimental strategy for crop production and power generation improvements needed to assure commercial success. The R and D effort also addresses environmental issues pertaining to introduction of the willow energy system. Beyond those Phase 1 requirements, the Consortium has already successfully demonstrated cofiring at Greenidge Station and has initiated development of the required nursery capacity for acreage scale-up. In Phase 2 every aspect of willow production and power generation from willow biomass will be demonstrated. The ultimate objective of Phase 2 is to transition the work performed under the Biomass Power for Rural Development project into a thriving, self-supported energy crop enterprise.

  7. Structural Aging Program technical progress for period, January 1, 1992--December 31, 1992

    SciTech Connect

    Naus, D.J.; Oland, C.B.

    1993-07-01

    The Structural Aging (SAG) Program is conducted for the Nuclear Regulatory Commission (NRC) by the Oak Ridge National Laboratory (ORNL). The program has the overall objective of preparing an expandable handbook or report which will provide potential structural safety issues and acceptance criteria for use by the NRC in nuclear power plant evaluations of continued service. Initial focus of the program is on concrete and concrete-related materials which comprise safety-related (Category I) structures in light-water reactor facilities. The SAG Program is organized into four tasks: Task S.1 -- Program Management, Task S.2 -- Materials Property Data Base, Task S.3 -- Structural Component Assessment/Repair Technology, and Task S.4 -- Quantitative Methodology for Continued Service Determinations. In meeting the individual objectives of these tasks resources are drawn from ORNL with subcontract support from universities and other research laboratories. This report provides an overview of principal developments in each of the four program tasks from January 1, 1992 to December 31, 1992. Planned activities under each of these tasks are also presented.

  8. Nondestructive Examination (NDE) Detection and Characterization of Degradation Precursors, Technical Progress Report for FY 2012

    SciTech Connect

    Ramuhalli, P.; Meyer, R.M.; Fricke, J.M.; Prowant, M.S.; Coble, J.B.; Griffin, J.W.; Pitman, S.G.; Dahl, M.E.; Kafentzis, T.A.; Roosendaal, T.J.

    2012-09-01

    The overall objective of this project was to investigate the effectiveness of nondestructive examination (NDE) technology in detecting material degradation precursors by initiating and growing cracks in selected materials and using NDE methods to measure crack precursors prior to the onset of cracking. Nuclear reactor components are subject to stresses over time that are not precisely known and that make the life expectancy of components difficult to determine. To prevent future issues with the operation of these plants because of unforeseen failure of components, NDE technology is needed that can be used to identify and quantify precursors to macroscopic degradation of materials. Some of the NDE methods being researched as possible solutions to the precursor detection problem are magnetic Barkhausen noise, nonlinear ultrasonics, acoustic emission, eddy current measurements, and guided wave technology. In FY12, the objective was to complete preliminary assessment of advanced NDE techniques for sensitivity to degradation precursors, using prototypical degradation mechanisms in laboratory-scale measurements. This present document reports on the deliverable that meets the following milestone: M3LW-12OR0402143 – Report detailing an initial demonstration on samples from the crack-initiation tests will be provided (demonstrating acceleration of the work).

  9. Power Systems Development Facility. Quarterly technical progress report, January 1--March 31, 1993

    SciTech Connect

    Not Available

    1993-10-01

    The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: 1. Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. 2. Hot Gas Cleanup Units to mate to all gas streams. 3. Combustion Gas Turbine. 4. Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility, finalizing the selection for the Carbonizer/Transport and the circulating pressurized fluidized-bed combustor (CPFBC) particulate control devices (PCDs), drafting the air permit for the facility and continue the installation of the transport reactor development unit (TRDU). The detailed design of the PSDF continued to refine interface points to streamline the design of the facility.

  10. Biomass power for rural development: Phase 2. Technical progress report, April 1--June 30, 1998

    SciTech Connect

    Neuhauser, E.

    1998-11-01

    The project undertaken by the Salix Consortium is a multi-phased, multi-partner endeavor. Phase-1 focused on initial development and testing of the technology and agreements necessary to demonstrate commercial willow production in Phase-2. The Phase-1 objectives have been successfully completed: preparing final design plans for two utility pulverized coal boilers, developing fuel supply plans for the project, obtaining power production commitments from the power companies for Phase-2, obtaining construction and environmental permits, and developing an experimental strategy for crop production and power generation improvements needed to assure commercial success. The R and D effort also addresses environmental issues pertaining to introduction of the willow energy system. Beyond those Phase-1 requirements the Consortium has already successfully demonstrated cofiring at Greenidge Station and developed the required nursery capacity for acreage scale-up. This past summer 105 acres were prepared in advance for the spring planting in 1998. Having completed the above tasks, the Consortium is well positioned to begin Phase-2. In phase-2 every aspect of willow production and power generation from willow will be demonstrated. The ultimate objective of Phase-2 is to transition the work performed under the Rural Energy for the Future project into a thriving, self-supported energy crop enterprise.

  11. Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

    NASA Technical Reports Server (NTRS)

    Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

    1990-01-01

    NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

  12. Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011) Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011)

    NASA Astrophysics Data System (ADS)

    Berk, H. L.

    2012-09-01

    The topic of the behaviour of energetic alpha particles in magnetic fusion confined plasmas is perhaps the ultimate frontier plasma physics issue that needs to be understood in the quest to achieve controlled power from the fusion reaction in magnetically confined plasmas. The partial pressure of alpha particles in a burning plasma will be ~5-10% of the total pressure and under these conditions the alpha particles may be prone to develop instability through Alfvénic interaction. This may lead, even with moderate alpha particle loss, to a burn quench or severe wall damage. Alternatively, benign Alfvénic signals may allow the vital information to control a fusion burn. The significance of this issue has led to extensive international investigations and a biannual meeting that began in Kyiv in 1989, followed by subsequent meetings in Aspenäs (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007) and Kyiv (2009). The meeting was initially entitled 'Alpha Particles in Fusion Research' and then was changed during the 1997 meeting to 'Energetic Particles in Magnetic Confinement Systems' in appreciation of the need to study the significance of the electron runaway, which can lead to the production of energetic electrons with energies that can even exceed the energy produced by fusion products. This special issue presents some of the mature interesting work that was reported at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was held in Austin, Texas, USA (7-11 September 2011). This meeting immediately followed a related meeting, the 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (5-7 September 2011). The meetings shared one day (7 September 2011) with presentations relevant to both groups. The presentations from most of the participants, as well as some preliminary versions of papers, are available at the

  13. Private Technical and Vocational Education in Sub-Saharan Africa: Provision Patterns and Policy Issues. New Trends in Technical and Vocational Education.

    ERIC Educational Resources Information Center

    Atchoarena, David; Esquieu, Paul

    The private provision trend in technical and vocational education (TVE) in sub-Saharan Africa occurred as the deterioration of state-run TVE systems in the region created a market niche for private providers. While advocates of deregulation believe the adoption of market principles in TVE will lead to greater efficiency and effectiveness, private…

  14. Predictive modelling of boiler fouling. Quarterly technical progress report, April 1, 1992--June 30, 1992

    SciTech Connect

    Not Available

    1992-12-01

    As this study incorporates in a general framework, appropriate modules to model condensable species transport to the surface along with particles, the need for a suitable solver for the reaction component of the species equations with regard to issues of stability, stiffness, economy, etc. becomes obvious. It is generally agreed in the literature that the major problem associated with the simultaneous integration of large sets of chemical kinetic rate equations is that of stiffness. Although stiffness does not have a simple definition, it is characterized by widely varying time constants. For example, in hydrogen-air combustion, the induction time is of the order of microseconds whereas the nitric oxide formation time is of the order of milliseconds. These widely different time constants present classical methods (such as the popular explicit Runge-Kutta method) with the following difficulty: to ensure stability of the numerical solution, these methods are restricted to using very short time steps that are determined by the smallest time constant. However, the time for all chemical species to reach near-equilibrium values is determined by the longest time constant. As a result, classical methods require excessive amounts of computer time to solve stiff systems of ordinary differential equations (ODE`s). Several approaches for the solution of stiff ODE`s have been proposed. Of all these techniques, the general purpose codes EPISODE and LSODE are regarded as the best available ``packaged`` codes for the solution of stiff systems of ODE`S. However, although these codes may be the best available for solving an arbitrary systems ODE`S, it may be possible to construct superior methods for solving a particular system of ODE`s governing the behavior of a specific problem. In this view, an exponentially fitted method, CREK1D, deserves a special mention and is described briefly.

  15. MHD Integrated Topping Cycle Project. Fifteenth quarterly technical progress report, February 1991--April 1991

    SciTech Connect

    Not Available

    1992-02-01

    A summary of the work is excerpted here. Final design of an MHD channel for the ITC program POC test has been completed. The channel was designed to be capable of 1.5 MW {sub e} power output and a lifetime of 2000 hours. Emphasis was placed upon durability and reliability. Hence, specific measures were taken to design against channel damage due to electric faults. The life-limiting issues associated with electrochemical corrosion and erosion of gas-side surfaces were addressed by the use of various materials with proven wear characteristics in a coal-fired MHD channel environment. Pitting of prototypical sidewall coupons was observed in the CDIF workhorse testing. The most likely cause of the observed pitting, water leaks resulting from cooling water tube braze failures, has been remedied. New brazing procedures and isolation of the sidebar gas-side material from water contact will prevent sidebar pitting in the prototypical channel. Water-side corrosion tests reported in this quarterly report include the latest results of tungsten-copper elements at controlled pH, heat flux and voltage levels. In the combustion subsystem, efforts continued to focus on understanding and improving the current levels of slag recovery and seed utilization achieved by the combustor. Analytical support was also provided in the areas of slag rejection system operation, precombustor operation, and oil burner design modification. Channel data analysis activities continued in support of prototypical coupon testing at the CDIF. Analyses are presented on channel wall slagging behavior and sidewall voltage distributions.

  16. Savannah River Ecology Laboratory Annual Technical Progress Report of Ecological Research, June 30, 2001

    SciTech Connect

    Bertsch, Paul M.; Janecek, Laura; Rosier, Brenda

    2001-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) in South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE) SRS near Aiken, South Carolina. The Laboratory's research mission during the 2001 fiscal year was fulfilled with the publication of one book and 83 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 77 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members and graduate students received awards. These are described in the section Special Accomplishments of Faculty, Staff, Students, and Administration on page 54. Notable scientific accomplishments include work conducted on contaminant transport, global reptile decline, phytoremediation, and radioecology. Dr. Domy Adriano authored the second edition of his book ''Trace Elements in Terrestrial Environments: Biogeochemistry, Bioavailability, and Risks of Metals'', which was recently published by Springer-Verlag. The book provides a comprehensive treatment of many important aspects of trace elements in the environment. The first edition of the book, published in 1986, has become a widely acclaimed and cited reference. International attention was focused on the problem of reptile species decline with the publication of an article on this topic in the journal ''Bioscience'' in August, 2000. The article's authors included Dr. Whit Gibbons and a number of other SREL herpetologists who researched the growing worldwide problem of decline of reptile species. Factors related to these declines include habitat loss and

  17. Committee on Atomic, Molecular, and Optical Sciences (CAMOS). Technical progress report & continuation proposal, February 1, 1993--January 31, 1994

    SciTech Connect

    Taylor, R.D.

    1997-10-01

    The Committee on Atomic, Molecular and Optical Sciences (CAMOS) of the National Research Council (NRC) is charged with monitoring the health of the field of atomic, molecular, and optical (AMO) science in the United States. Accordingly, the Committee identifies and examines both broad and specific issues affecting the field. Regular meetings, teleconferences, briefings from agencies and the scientific community, the formation of study panels to prepare reports, and special symposia are among the mechanisms used by the CAMOS to meet its charge. This progress report presents a review of CAMOS activities from February 1, 1993 to January 31, 1994. The details of prior activities are discussed in earlier progress reports. This report also includes the status of activities associated with the CAMOS study on the field that is being conducted by the Panel on the Future of Atomic, Molecular, and Optical Sciences (FAMOS). During the above period, CAMOS has continued to track and participate in, when requested, discussions on the health of the field. Much of the perspective of CAMOS has been presented in the recently-published report Research Briefing on Selected Opportunities in Atomic, Molecular, and Optical Sciences. That report has served as the basis for briefings to representatives of the federal government as well as the community-at-large. In keeping with its charge to monitor the health of the field, CAMOS launched a study designed to highlight future directions of the field.

  18. I-NERI QUARTERLY TECHNICAL PROGRESS REPORT - JANUARY 1 - MARCH 31, 2005

    SciTech Connect

    Chang Oh

    2005-03-01

    codes. The three categories of experiments were performed in the facility; (1) upper pool cooling trip test, (2) LOFC experiment, (3) emissivity measurement experiment. (C) Prof. NO continued Task 3. (Prof NO) The experimental work of air ingress is going on without any concern: Geometry and size effect test has been completed. The conversion factor for internal surface area was obtained through this experiment. Burn-off test was performed and the uniformity of internal reaction was confirmed. (D) INEEL engineers continued to extend the diffusion model for multiple chemical species and made some calculations. (E) Prof. Lee and Martin at University of Michigan continued to analyze the effect of the stochastic fuel on the neutronic analysis and have initiated fuel depletion calculations for the VHTGR core. Progress during the past quarter includes: Further analysis of stochastic fuel geometry; Preliminary Monte Carlo depletion of full-core VHTGR; and Installation of MCNP5 on Unix cluster.

  19. A methodological approach to comparing pros and cons of delocalizing villages: socio-economic and technical issues

    NASA Astrophysics Data System (ADS)

    Guadagno, Eleonora; Iovine, Giulio G. R.; Petrucci, Olga; Forciniti, Pinuccia R.

    2014-05-01

    Cavallerizzo have been analysed within the frame of a PhD thesis by one of the authors. The present study focuses on the Cavallerizzo case study to discuss a methodological approach useful to comparing pros and cons of delocalizing villages, aiming at properly considering socio-economic effects in addition to technical issues.

  20. Advanced direct liquefaction concepts for PETC generic units, Phase 2. Quarterly technical progress report for period October--December 1995

    SciTech Connect

    1996-02-01

    Progress reports are presented for: Task 1 management plan; Task 2.1 laboratory support (University of Kentucky/Center for Applied Energy Research); Task 3 continuous operations/parametric studies (Hydrocarbon Technologies, Inc.); Task 4.1 process modeling; and Task 4.4 preliminary technical assessment (LDP Associates). Some of the high points for this period are: the activity of the base catalyst prepared by pressure filtration of the Wilsonville Run 262E V-1082 ashy resid was determined and compared with the conversion of coal in the absence of any added catalyst; this material was found to contain 740 mg Mo/kg; in the catalyst screening test, the pressure filtered solids that had been added to the reaction mixture to a level equivalent to the solids contained in Wilsonville Run 263J gave coal conversion of 98.2% with a resid conversion of 24%; and the effect of presulfiding conditions on activating a Mo-impregnated coal with different H{sub 2}S/H{sub 2} mixtures at different temperatures and reaction times was investigated.

  1. Fundamental characterization of alternate fuel effects in continuous combustion systems. Summary technical progress report, August 15, 1978-January 31, 1980

    SciTech Connect

    Blazowski, W.S.; Edelman, R.B.; Wong, E.

    1980-02-27

    The overall objective of this contract is to assist in the development of fuel-flexible combustion systems for gas turbines as well as Rankine and Stirling cycle engines. The primary emphasis of the program is on liquid hydrocarbons produced from non-petroleum resources. Fuel-flexible combustion systems will provide for more rapid transition of these alternative fuels into important future energy utilization centers (especially utility power generation with the combined cycle gas turbine). The specific technical objectives of the program are: (a) develop an improved understanding of relationships between alternative fuel properties and continuous combustion system effects, and (b) provide analytical modeling/correlation capabilities to be used as design aids for development of fuel-tolerant combustion systems. This is the second major report of the program. Key experimental findings during this reporting period concern stirred combustor soot production during operation at controlled temperature conditions, soot production as a function of combustor residence time, an improved measurement technique for total hydrocarbons and initial stirred combustor results of fuel nitrogen conversion. While the results to be presented concern a stirred combustor which utilizes premixed fuel vapor/oxidant mixtures, a new combustor which combusts liquid fuel injected into the reactor as a spray has been developed and will be described. Analytical program progress includes the development of new quasiglobal models of soot formation and assessment of needs for other submodel development.

  2. High octane ethers from synthesis gas-derived alcohols. Quarterly technical progress report, July--September 1993

    SciTech Connect

    Klier, K.; Herman, R.G.; Feeley, O.C.; Johansson, M.A.

    1993-11-01

    The objective of the proposed research is to synthesize oxygenated fuel ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from coal-derived H{sub 2}/CO/CO{sub 2} synthesis via alcohol mixtures that are rich in methanol and 2-methyl-1-proanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers. Both organic and inorganic catalysts will be investigated, and the better catalysts will be subjected to long term performance studies. The project is divided into the following three tasks: (1) synthesis of high octane ethers from alcohol mixtures containing predominantly methanol and 2-methyl-1-propanol over superacid resins, (2) inorganic catalysts for the synthesis of high octane ethers form alcohols, and (3) long term performance and reaction engineering for scale-up of the alcohols-to-ether process. A summary of technical progress is provided in this report.

  3. Production of low-cost hydrogen. [Eleventh quarterly] technical progress report, [April 1, 1992--June 30, 1992

    SciTech Connect

    Not Available

    1992-12-31

    This eleventh Quarterly Technical Progress Report presents the results of work accomplished during the period April 1, 1992 through June 30, 1992 under Contract No. DE-AC21-88MC26367 entitled ``Production of Low-Cost Hydrogen.`` The overall objective of this program is to verify the ability of the MTCI indirectly heated fluid-bed gasifier to produce a hydrogen-rich product gas from liquefaction by-product streams and from char produced in mild gasification processes. The characterization unit was renovated and another burner/exhaust designed to replace the one that has been in use for several years. Initial shakedown tests for bed calcination indicated that the gasifier should be changed with fresh limestone and kept at temperature, with whatever make-up was required to maintain bed height until calcination was completed as determined by the CO concentration. Char gasification was then initiated and two relatively long-term tests (15.5 and 10.5 hours) were completed at two different temperatures.

  4. Application of CIS of high-efficiency PV module fabrication. Annual technical progress report, April 1, 1996--March 31, 1997

    SciTech Connect

    Basol, B.; Kapur, V.; Leidholm, C.

    1997-08-01

    This is the Phase II Annual Technical Report of the subcontract titled {open_quotes}Application of CIS to High Efficiency PV Module fabrication.{close_quotes} The general objectives of the program are the development of a novel, non-vacuum process for CIS film deposition, optimization of the various layers forming the CIS device structure, and fabrication of high efficiency submodules. The specific goals of the project are the development of 13% efficient small area cells and 10% efficient submodules using a novel, low-cost CIS deposition approach. During this research period, the authors concentrated their efforts on three different areas of research. Within the National CIS Partnership Program, they participated in the {open_quotes}substrate/Mo interactions{close_quotes} working group and investigated issues such as Na diffusion from the soda-lime glass substrate into the Mo layers and CIS films. It was determined that the Na content within the Mo layers was not a strong function of the nature of the Mo film. However, diffusion through the Mo layers was found to be a function of the Mo film characteristics as well as a very strong function of the CIS growth process. Na was found to be on the grain boundaries in Mo and CIS layers.

  5. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

    SciTech Connect

    Cottrell, W.B.; Passiakos, M.

    1982-06-01

    This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

  6. Regulatory and Technical Issues Concerning the Detection and Treatment of NDMA-Contaminated Groundwater at NASA WSTF

    NASA Technical Reports Server (NTRS)

    Wiebe, D. T.; Zigmond, M. J.; Tufts, C. A.

    2002-01-01

    The National Aeronautics and Space Administration (NASA) White Sands Test Facility (WSTF) was established in 1963 primarily to provide rocket engine testing services for several NASA programs. The groundwater underlying the site has been contaminated as a result of historical operations. Groundwater contaminants include several volatile organic compounds (VOCs) and two semi-volatile compounds: N-nitrosodimethylamine (NDMA) and N-nitrodimethylamine (DMN). This paper discusses some of the technical, analytical, regulatory, and health risk issues associated with the contaminant plume. The plume has moved approximately 2.5 miles downgradient of the facility industrial boundary, with evidence of continued migration. As a result, NASA has proposed a pump and treat system using air strippers and ultraviolet (UV) oxidation to stabilize future movement of the contaminant plume. The system has been designed to treat 1,076 gallons (4,073 liters) per minute, with provisions for future expansion. The UV oxidation process was selected to treat NDMA-contaminated groundwater based on successes at other NDMA-contaminated sites. Bench- and pilot-scale testing of WSTF groundwater confirmed the ability of UV oxidation to destroy NDMA and generated sufficient data to design the proposed full-scale treatment system. NDMA is acutely toxic and is a probable human carcinogen. EPA-recommended health risk criteria for the residential consumption of NDMA/DMN-contaminated groundwater was used to determine that a 1.0 x 10(exp -6) excess cancer risk corresponds to 1.7 parts per trillion (ppt). EPA analytical methods are unable to detect NDMA and DMN in the low ppt range. EPA's current Appendix IX analytical method used to screen for NDMA, Method 8270, can detect NDMA only at levels that are orders of magnitude greater than the recommended health risk level. Additionally, EPA Method 607, the most sensitive EPA approved method, has a detection limit of 150 ppt. This corresponds to an excess cancer

  7. From Data to Bonuses: A Case Study of the Issues Related to Awarding Teachers Pay on the Basis of Their Students' Progress. Research Brief

    ERIC Educational Resources Information Center

    National Center on Performance Incentives, 2008

    2008-01-01

    In "From Data to Bonuses: A Case Study of the Issues Related to Awarding Teachers Pay on the Basis of their Students' Progress"--a paper presented at the National Center on Performance Incentives research to policy conference in February--Daniel McCaffrey, Bing Han, and J.R. Lockwood of the RAND Corporation discuss the complex process of designing…

  8. Final Technical Progress Report

    SciTech Connect

    J.Y. Hwang; R.C. Greenlund

    2002-12-31

    Michigan Technological University has demonstrated major inroads in establishing the viability of utilizing aluminum smelting by-product waste materials in lightweight concrete product applications. The research identified key elements of producing various forms of lightweight concrete products through utilizing various procedures and mixture components with the by-product materials. A process was developed through pilot plant testing that results in additional aluminum recovery at finer sizes, a clean returnable salt product through spray drying technology, and a low-salt-content oxide product with enough aluminum metal content that it can be used to form lightweight cementitious mixtures. Having three distinct products aids in generating favorable process economics. Revenue projections from aluminum recovery and salt recovery are enough to cover processing costs and create a cost-free oxide product to market for lightweight concrete applications. This supply side commercialization strategy offers aluminum by-product recyclers a potentially no cost product, which has been demonstrated through this project to create desirable and marketable lightweight concrete products of various forms. Environmental benefits to the public are tremendous. At best, all dross and salt cake materials have the potential to be completely recycled and utilized. At worst, disposal sites would see a reduced amount of material: a post processed oxide product with little salt and no hydrogen sulfide or ammonia gas generating capability, which, if isolated from high alkali conditions, would pose no reactivity concerns. The US aluminum industry has historically, along with the steel industry, been a leader in recycling metal. The findings from this project, increased metal recovery, improved salt recycling, and demonstrated end uses for oxide residues, will go a long way in helping the aluminum industry obtain 100% material utilization and zero discharge.

  9. Magnetic Fusion Energy Plasma Interactive and High Heat Flux Components: Volume 5, Technical assessment of critical issues in the steady state operation of fusion confinement devices

    SciTech Connect

    Not Available

    1988-01-01

    Critical issues for the steady state operation of plasma confinement devices exist in both the physics and technology fields of fusion research. Due to the wide range and number of these issues, this technical assessment has focused on the crucial issues associated with the plasma physics and the plasma interactive components. The document provides information on the problem areas that affect the design and operation of a steady state ETR or ITER type confinement device. It discusses both tokamaks and alternative concepts, and provides a survey of existing and planned confinement machines and laboratory facilities that can address the identified issues. A universal definition of steady state operation is difficult to obtain. From a physics point of view, steady state is generally achieved when the time derivatives approach zero and the operation time greatly exceeds the characteristic time constants of the device. Steady state operation for materials depends on whether thermal stress, creep, fatigue, radiation damage, or power removal are being discussed. For erosion issues, the fluence and availability of the machine for continuous operation are important, assuming that transient events such as disruptions do not limit the component lifetimes. The panel suggests, in general terms, that steady state requires plasma operation from 100 to 1000 seconds and an availability of more than a few percent, which is similar to the expectations for an ETR type device. The assessment of critical issues for steady state operation is divided into four sections: physics issues; technology issues; issues in alternative concepts; and devices and laboratory facilities that can address these problems.

  10. Programs of Study: Year 2 Joint Technical Report. Research Snapshot

    ERIC Educational Resources Information Center

    National Research Center for Career and Technical Education, 2010

    2010-01-01

    In January 2010, the National Research Center for Career and Technical Education (NRCCTE) issued a progress report on three studies being conducted by the Center that examine the implementation and outcomes of Programs of Study (POS), which were required in the 2006 reauthorization of the federal legislation for career and technical education…

  11. The Climate Change Crisis as an International Civil Rights Issue: Forging an Alliance Between Science, Activism, and Progressive Social Movements

    NASA Astrophysics Data System (ADS)

    Lynch, B. J.; Driver, S.

    2011-12-01

    If our scientific community wants to make real progress on the climate change and environmental crisis we must be willing to side with and fight for the oppressed. The national and international communities most ready to act - those hit hardest by the real impact of climate change in their day-to-day lives - need the political leadership of and a living, organic connection with scientists who are prepared to tell the truth and act on the truth of our science. A new generation of scientist-activist leaders and this strategic and mutually beneficial alliance with the oppressed will be necessary to wage an international, intransigent fight to enact and implement the social, political, and economic policies needed to mitigate the damage already done and prevent future environmental and human catastrophe. In the statement BAMN distributed to last year's Fall AGU conference we said, "there will be no shortage of mass struggle in the next period of history." This spring we saw the absolutely awe-inspiring social upheavals in North Africa and the Middle East in the form of waves of mass demonstrations in country after country. Many of those struggles, with demands for real democracy, for jobs and economic opportunities, for improved living conditions, continue to this day. In virtually every instance, these popular and progressive social movements have been led by youth: middle school, high school and college students. In the US and Europe we have seen the spread of student-led struggle around the defense of K-12 public education and on college campuses in defense of various programs, opportunities, and the character of the educational experience. The most dynamic force in these struggles has been the Latina/o, black, other underrepresented minority and immigrant youth who refuse to accept permanent second-class citizenship and a future devoid of hope and opportunity. We will discuss our experience as a youth-led civil rights organization presenting the issues of climate

  12. Investigation of heat transfer and combustion in the Advanced Fluidized Bed Combustor (FBC). Technical progress report No. 2, January 1, 1994--March 31, 1994

    SciTech Connect

    Lee, S.W.

    1994-04-01

    This technical report summarizes the research performed and progress achieved during the period of January 1, 1994 to March 31, 1994. Design and fabrication of the exploratory cold test model was continued with an arrangement of the auxiliary systems. The auxiliary systems are consisted of air supply system, test chamber, air humidifying unit, and instrumentations for measuring air flow rate, particle size distribution, and particle collision frequency/mass flux. The electrostatic impact probe and associated signal processing unit were designed and fabricated to measure particle mass flux and particle-probe collision frequency in the exploratory cold model. The progress of this project has been on schedule.

  13. International Coalition of Library Consortia (ICOLC): Guidelines for Technical Issues in Request for Proposal (RFP) Requirements and Contract Negotiations.

    ERIC Educational Resources Information Center

    Online Libraries and Microcomputers, 1999

    1999-01-01

    Presents guidelines developed by the ICOLC (International Coalition of Library Consortia) regarding vendor contracts and negotiations that involve electronic information resources. Highlights include content issues, including HTML, use of printers, and use of multimedia; and platform issues, including system architecture, access control, security…

  14. Training the Technical Trainer: Issues and Strategies. Papers Presented at a Workshop (Chiba City, Japan, May 13-23, 1987).

    ERIC Educational Resources Information Center

    Asian Development Bank, Manila (Philippines).

    In May 1987 a regional workshop was organized in Japan under the technical assistance program of the Asian Development Bank with the collaboration of the Asian and Pacific Skill Development Programme of the International Labour Organisation and the support of the Ministry of Labor of the government of Japan. The workshop addressed the major issues…

  15. Postsecondary and Labor Force Transitions among Public High School Career and Technical Education Participants. Issue Tables. NCES 2011-234

    ERIC Educational Resources Information Center

    Bersudskaya, Vera; Chen, Xianglei

    2011-01-01

    Career and technical education (CTE) is a significant component of high school education. For the last several decades, more than 90 percent of public high school graduates have earned at least some credits in CTE, with graduates from the class of 2005 earning an average of 4.0 CTE credits (Hudson and Laird 2009; Levesque 2003; Levesque et al.…

  16. Committee on Atomic, Molecular, and Optical Sciences (CAMOS). Technical progress report, [February 1, 1991--January 31, 1992

    SciTech Connect

    Not Available

    1992-03-01

    The Committee on Atomic, Molecular, and Optical Sciences is a standing committee under the auspices of the Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Applications of the National Academy of Sciences -- National Research Council. The atomic, molecular, and optical (AMO) sciences represent a broad and diverse field in which much of the research is carried out by small groups. These groups generally have not operated in concert with each other and, prior to the establishment of CAMOS, there was no single committee or organization that accepted the responsibility of monitoring the continuing development and assessing the general public health of the field as a whole. CAMOS has accepted this responsibility and currently provides a focus for the AMO community that is unique and essential. The membership of CAMOS is drawn from research laboratories in universities, industry, and government. Areas of expertise on the committee include atomic physics, molecular science, and optics. A special effort has been made to include a balanced representation from the three subfields. (A roster is attached.) CAMOS has conducted a number of studies related to the health of atomic and molecular science and is well prepared to response to requests for studies on specific issues. This report brief reviews the committee work of progress.

  17. Establishment of an Institute for Fusion Studies. Technical progress report, 1 November 1993--31 October 1994

    SciTech Connect

    Hazeltine, R.D.

    1994-07-01

    The Institute for Fusion Studies is a national center for theoretical fusion plasma physics research. Its purposes are: (1) to conduct research on theoretical questions concerning the achievement of controlled fusion energy by means of magnetic confinement--including both fundamental problems of long-range significance, as well as shorter-term issues; (2) to serve as a national and international center for information exchange by hosting exchange visits, conferences, and workshops; (3) and to train students and postdoctoral research personnel for the fusion energy program and plasma physics research areas. The theoretical research results obtained by the Institute contribute to the progress of nuclear fusion research, whose goal is the development of fusion power as a basic energy source. Close collaborative relationships have been developed with other university and national laboratory fusion groups, both in the US and abroad. In addition to its primary focus on mainstream fusion physics, the Institute is also involved with research in fusion-sidestream fields, such as advanced computing techniques, nonlinear dynamics, space plasmas and astrophysics, statistical mechanics, fluid dynamics, and accelerator physics. Important research discoveries are briefly described.

  18. Active sites in char gasification. Quarterly technical progress report, 1 January 1984-31 March 1984. [Polymers of phenol-formaldehyde family; chars produced from model compounds

    SciTech Connect

    Calo, J.M.; Suubers, E.M.; Wojtowicz, M.; Lilly, W.

    1984-05-01

    This project is concerned with the study of the nature and behavior of active sites in gasification of chars produced from synthesized model compounds, primarily of the phenol-formaldehyde family of resins. The current technical progress report presents further developments on resin synthesis and characterization and the design of a pyro-gasifier reactor for transient kinetic studies of the chars produced from the model compounds. 7 references, 12 figures, 2 tables.

  19. Rapid pressure swing absorption cleanup of post-shift reactor synthesis gas. Technical progress report, August 1, 1992--October 31, 1992

    SciTech Connect

    Sirkar, K.K.; Majumdar, S.; Bhaumik, S.

    1993-01-29

    The theoretical model for the absorption part of a particular type of RAPSAB cycle (Mode 3) (see Technical Progress Report No. 7) has been developed. The numerical simulations of the model compare well with the experimental results presented in the last report (Technical Progress Report No. 7). A number of experiments were carried out also for Mode 2 type of operation by varying the time for initial pressurization of the hollow fiber module as well as the total absorption time. These were done to provide a basis for comparison with the theoretical model to be developed later. We have initiated RAPSAB studies with reactive absorbents such as 19.5 % aqueous solution of diethanolamine (DEA) for the absorption of C0{sub 2} from a C0{sub 2}-N{sub 2} mixture. Six experiments were carried out using Mode 3 type of operation and a C0{sub 2}-N{sub 2} mixture containing 9.9% CO, and balance N{sub 2}. Excellent purification was obtained. No C0{sub 2} was observed in the purified high pressure gas outlet for absorption time of up to 14 seconds; the purified high pressure gas flow rate was also considerable. Module No. 5 was used for all experiments. The details of the module are given in Technical Progress Report No. 7.

  20. An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

    NASA Technical Reports Server (NTRS)

    Goranson, H. T.

    1986-01-01

    The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.