Science.gov

Sample records for joint mr-arthrographie des

  1. MR-arthrography and CT-arthrography in sports-related glenolabral injuries: a matched descriptive illustration.

    PubMed

    Jarraya, Mohamed; Roemer, Frank W; Gale, Heather I; Landreau, Philippe; D'Hooghe, Pieter; Guermazi, Ali

    2016-04-01

    The combination of a large range of motion and insufficient bony stabilization makes the glenohumeral joint susceptible to injuries including dislocation in young athletes. Magnetic resonance arthrography (MR-arthrography) and computed tomography arthrography (CT-arthrography) play an important role in the preoperative workup of labroligametous injuries. This paper illustrates MR-arthrography and CT-arthrography findings acquired at the same time on the same subjects to illustrate common causes and sequelae of shoulder instability. Teaching Points • MR-arthrography and CT-arthrography are equivalent for SLAP and full-thickness rotator cuff tears.• CT-arthrography is superior in evaluating osseous defects and cartilage surface lesions.• MR-arthrography is superior in evaluating intrasubstance and extra-articular tendinous injuries. PMID:26746976

  2. Potential Utility of a Combined Approach with US and MR Arthrography to Image Medial Elbow Pain in Baseball Players.

    PubMed

    Roedl, Johannes B; Gonzalez, Felix M; Zoga, Adam C; Morrison, William B; Nevalainen, Mika T; Ciccotti, Michael G; Nazarian, Levon N

    2016-06-01

    Purpose To evaluate a combined imaging approach with both ultrasonography (US; conventional US and valgus stress US) and magnetic resonance (MR) arthrography in baseball players with medial elbow pain. Materials and Methods Institutional review board approval was obtained and the requirement for informed consent was waived. The study is compliant with HIPAA. Baseball players with medial elbow pain underwent US in addition to MR arthrography. Findings were assessed with each modality alone and both combined in this retrospective investigation. For the evaluation of ulnar collateral ligament (UCL) tears with stress US, the interval gapping of the medial elbow joint was measured between rest and valgus stress both at the injured and at the uninjured (contralateral) elbow. Surgical or arthroscopic correlation was available as the so-called gold standard. McNemar tests compared the accuracies of the imaging modalities. Results In this study, 144 baseball players had 191 findings of medial elbow pain, including 53 UCL tears. With stress US, joint gapping at the injured elbow greater than 1.0 mm compared with the contralateral elbow yielded a sensitivity, specificity, and accuracy of 96%, 81%, and 87%, respectively, for diagnosing UCL tears. With MR arthrography, the sensitivity, specificity, and accuracy for UCL tears were 81%, 91%, and 88%, respectively, and increased to 96% (P = .013, McNemar test), 99% (P = .023), and 98% (P < .001), respectively, when combined with US to a dual modality MR and US approach. For 31 patients with ulnar neuritis, the sensitivity, specificity, and accuracy increased from 74%, 92%, and 88%, respectively, with MR arthrography alone to 90% (P = .07, McNemar test), 100% (P < .001), and 98% (P < .001) combined with US. For the 59 myotendinous and the 48 osteochondral diagnoses, the sensitivity, specificity, and accuracy with MR arthrography alone were 93%, 93%, and 93%, and 94%, 98%, and 97%, respectively, with no additional diagnostic value

  3. Comparison of conventional MRI and MR arthrography in the evaluation of wrist ligament tears: A preliminary experience

    PubMed Central

    Pahwa, Shivani; Srivastava, Deep N; Sharma, Raju; Gamanagatti, Shivanand; Kotwal, Prakash P; Sharma, Vijay

    2014-01-01

    Aims: To compare conventional magnetic resonance imaging (MRI) and direct magnetic resonance (MR) arthrography in the evaluation of triangular fibrocartilage complex (TFCC) and intrinsic wrist ligament tears. Materials and Methods: T1-weighted, fat suppressed (FS) proton density plus T2-weighted (FS PD/T2), 3D multiple-echo data image combination (MEDIC) sequences and direct MR arthrography were performed in 53 patients with wrist pain. Images were evaluated for the presence and location of TFCC, scapholunate ligament (SLL) and lunatotriquetral ligament (LTL) tears, and imaging findings were compared with operative findings in 16 patients who underwent arthroscopy or open surgery (gold standard). Results: Sixteen patients underwent arthroscopy/open surgery: 12 TFCC tears were detected arthroscopically out of which 9 were detected on FS PD/T2 sequence, 10 on MEDIC sequence, and all 12 were detected on MR arthrography. The sensitivities of FS PD/T2, MEDIC sequences, and MR arthrography in the detection of TFCC tears were 75%, 83.3%, and 100%, respectively. Out of the eight arthroscopically confirmed SLL tears, three tears were detected on FS PD/T2 sequence, five on MEDIC sequence, and all eight were visualized on MR arthrography. The sensitivities of FS PD/T2, MEDIC sequences, and MR arthrography in detecting SLL tears were 37.5%, 62.5%, and 100%, respectively. One arthroscopically confirmed LTL tear was diagnosed on FS PD/T2 sequence, three on MEDIC sequence, and all five arthroscopically confirmed LTL tears were detected with MR arthrography. The sensitivities of PD, MEDIC sequences, and MR arthrography in detecting LTL tears were 20%, 40%, and 100%, respectively. Conclusions: MR arthrography is the most sensitive and specific imaging modality for the evaluation of wrist ligament tears. PMID:25114389

  4. Comparison of Indirect MR Arthrography With Conventional MRI in the Diagnosis of Knee Pathologies in Patients With Knee Pain

    PubMed Central

    Babaei Jandaghi, Ali; Mardani-Kivi, Mohsen; Mirbolook, Ahmadreza; Emami-Meybodi, Mohammad Kazem; Mohammadzadeh, Solmaz; Farahmand, Maral

    2016-01-01

    Background Knee pain is a common problem in the general population. In order to determine the extent of the injury and the appropriate treatment, MRI provides the most accurate imaging method. This may be done through conventional MRI techniques or by injecting a contrast material (MR arthrography). Objectives The purpose of this study was to compare the diagnostic value of these two methods. Patients and Methods The study involved the diagnostic evaluation on 60 patients with knee pain who received treatment over the course of a one-year period. Referred patients were randomly divided into two groups: indirect MR arthrography was performed on one group, and conventional MRI was performed on the other group. Both groups then underwent arthroscopy. The results from both groups were compared with the arthroscopic findings. Results In all of the pathologies studied, the sensitivity, specificity, and the positive and negative predictive values were evaluated. A high rate of accuracy was found between MR arthrography and arthroscopy (P < 0.05) for all knee injuries, however a similar rate of accuracy between conventional MRI and arthroscopy was only seen in patients with damage to the posterior cruciate ligament (PCL), the tibio-femoral articular cartilage, and patella chondromalacia (P < 0.05). The highest rate of accuracy was seen in cases where indirect MR arthrography was used for the diagnosis of anterior cruciate ligament (ACL) damage (K = 1). Conclusions Our results have shown that indirect MR arthrography had greater diagnostic accuracy in regards to the sensitivity, specificity, and positive and negative predictive values than conventional MRI in knee pathologies. PMID:27625998

  5. Magnetic Resonance Arthrography of the Glenohumeral Joint: Ultrasonography-Guided Technique Using a Posterior Approach

    PubMed Central

    Ogul, Hayri; Bayraktutan, Ummugulsum; Yildirim, Omer Selim; Suma, Selami; Ozgokce, Mesut; Okur, Adnan; Kantarci, Mecit

    2012-01-01

    Objective: The purpose of this study was to assess the efficacy and feasibility of ultrasound (US)-guided magnetic resonance (MR) arthrography of the glenohumeral joint via a posterior approach. Materials and Methods: Thirty-four patients (18 males and 16 females) who were suspected to have glenohumeral joint pathology were examined using MR arthrography. The patients ranged in age from 21 to 85 years, and the average age was 45±15.9 years. A Toshiba Xario US unit was utilized. Ultrasonography examinations were conducted using a broad-band 5–12 MHz linear array transducer. Gadolinium was injected into the shoulder joint using an 18–20 gauge needle. MR imaging was performed within the first 30 min after the injection. Results: The injection of gadolinium into the shoulder joint was successfully accomplished in all 34 patients. Major contrast media extravasation outside the joint was depicted in only two patients (5.9%). No major complications were encountered. Conclusion: Ultrasonography is an effective alternate guidance technique for the injection of gadolinium into the glenohumeral joint for MR arthrography. US-guided arthrography via a posterior approach to the glenohumeral joint is safe, accurate, well tolerated by patients and easy to perform with minimal training. PMID:25610213

  6. Diagnostic accuracy of ultrasonography, MRI and MR arthrography in the characterisation of rotator cuff disorders: a systematic review and meta-analysis

    PubMed Central

    Roy, Jean-Sébastien; Braën, Caroline; Leblond, Jean; Desmeules, François; Dionne, Clermont E; MacDermid, Joy C; Bureau, Nathalie J; Frémont, Pierre

    2015-01-01

    Background Different diagnostic imaging modalities, such as ultrasonography (US), MRI, MR arthrography (MRA) are commonly used for the characterisation of rotator cuff (RC) disorders. Since the most recent systematic reviews on medical imaging, multiple diagnostic studies have been published, most using more advanced technological characteristics. The first objective was to perform a meta-analysis on the diagnostic accuracy of medical imaging for characterisation of RC disorders. Since US is used at the point of care in environments such as sports medicine, a secondary analysis assessed accuracy by radiologists and non-radiologists. Methods A systematic search in three databases was conducted. Two raters performed data extraction and evaluation of risk of bias independently, and agreement was achieved by consensus. Hierarchical summary receiver-operating characteristic package was used to calculate pooled estimates of included diagnostic studies. Results Diagnostic accuracy of US, MRI and MRA in the characterisation of full-thickness RC tears was high with overall estimates of sensitivity and specificity over 0.90. As for partial RC tears and tendinopathy, overall estimates of specificity were also high (>0.90), while sensitivity was lower (0.67–0.83). Diagnostic accuracy of US was similar whether a trained radiologist, sonographer or orthopaedist performed it. Conclusions Our results show the diagnostic accuracy of US, MRI and MRA in the characterisation of full-thickness RC tears. Since full thickness tear constitutes a key consideration for surgical repair, this is an important characteristic when selecting an imaging modality for RC disorder. When considering accuracy, cost, and safety, US is the best option. PMID:25677796

  7. Joint measurement of lensing-galaxy correlations using SPT and DES SV data

    DOE PAGESBeta

    Baxter, E. J.

    2016-07-04

    We measure the correlation of galaxy lensing and cosmic microwave background lensing with a set of galaxies expected to trace the matter density field. The measurements are performed using pre-survey Dark Energy Survey (DES) Science Verification optical imaging data and millimeter-wave data from the 2500 square degree South Pole Telescope Sunyaev-Zel'dovich (SPT-SZ) survey. The two lensing-galaxy correlations are jointly fit to extract constraints on cosmological parameters, constraints on the redshift distribution of the lens galaxies, and constraints on the absolute shear calibration of DES galaxy lensing measurements. We show that an attractive feature of these fits is that they are fairly insensitive to the clustering bias of the galaxies used as matter tracers. The measurement presented in this work confirms that DES and SPT data are consistent with each other and with the currently favoredmore » $$\\Lambda$$CDM cosmological model. In conclusion, it also demonstrates that joint lensing-galaxy correlation measurement considered here contains a wealth of information that can be extracted using current and future surveys.« less

  8. Joint Analysis of Galaxy-Galaxy Lensing and Galaxy Clustering: Methodology and Forecasts for DES

    SciTech Connect

    Park, Y.

    2015-07-19

    The joint analysis of galaxy-galaxy lensing and galaxy clustering is a promising method for inferring the growth function of large scale structure. Our analysis will be carried out on data from the Dark Energy Survey (DES), with its measurements of both the distribution of galaxies and the tangential shears of background galaxies induced by these foreground lenses. We develop a practical approach to modeling the assumptions and systematic effects affecting small scale lensing, which provides halo masses, and large scale galaxy clustering. Introducing parameters that characterize the halo occupation distribution (HOD), photometric redshift uncertainties, and shear measurement errors, we study how external priors on different subsets of these parameters affect our growth constraints. Degeneracies within the HOD model, as well as between the HOD and the growth function, are identified as the dominant source of complication, with other systematic effects sub-dominant. The impact of HOD parameters and their degeneracies necessitate the detailed joint modeling of the galaxy sample that we employ. Finally, we conclude that DES data will provide powerful constraints on the evolution of structure growth in the universe, conservatively/optimistically constraining the growth function to 7.9%/4.8% with its first-year data that covered over 1000 square degrees, and to 3.9%/2.3% with its full five-year data that will survey 5000 square degrees, including both statistical and systematic uncertainties.

  9. Photometric redshifts and clustering of emission line galaxies selected jointly by DES and eBOSS

    SciTech Connect

    Jouvel, S.; et al.

    2015-09-23

    We present the results of the first test plates of the extended Baryon Oscillation Spectroscopic Survey. This paper focuses on the emission line galaxies (ELG) population targetted from the Dark Energy Survey (DES) photometry. We analyse the success rate, efficiency, redshift distribution, and clustering properties of the targets. From the 9000 spectroscopic redshifts targetted, 4600 have been selected from the DES photometry. The total success rate for redshifts between 0.6 and 1.2 is 71\\% and 68\\% respectively for a bright and faint, on average more distant, samples including redshifts measured from a single strong emission line. We find a mean redshift of 0.8 and 0.87, with 15 and 13\\% of unknown redshifts respectively for the bright and faint samples. In the redshift range 0.6DES photometric redshifts and find that the outlier fraction can be reduced using a comparison between template fitting and neural network, or using a random forest algorithm.

  10. Conception axiomatique des joints hybrides a recouvrement simple en materiaux composites

    NASA Astrophysics Data System (ADS)

    Ouellet, Marc

    Minimizing weight is a primary objective in every system design in the aerospace and automotive industry. Therefore, the use of composite materials has become an integral part of the design of mechanical components. However, in composite structure design, their complexity normally makes it impossible to design them as a single part. This leads to the necessity of using joints. Sadly, these joints introduce discontinuities in the stress distribution within the components and are often the sites of stress concentration. Therefore, they may limit the performance of a structure, in addition to increasing the overall mass significantly due to the use of mechanical fasteners such as bolts and rivets. This is why bonded joints are increasingly popular. They are much lighter than bolted or riveted joints and are often more rigid. Unfortunately, it is very difficult to inspect a bonded joint for defects since the presence of cracks in the adhesive cannot be observed with the naked eye. The main objective of this work is to propose a new design methodology for hybrid joints. To accomplish this, it is necessary to establish reliable analysis tools to improve our understanding of the behavior of these joints when subjected to an external force. A better understanding of the interactions between the parameters is also required. To improve our knowledge on the subject, a literature review was conducted. This review was structured as to emphasize on the behavior of hybrid single lap joints when subjected to an external force in tension. Following this literature review, an analysis of the stress distribution within the joint was carried out using a finite element model. The model and the results were compared with those from two papers in order to validate the quality of representation. Subsequently, a modification was made to an existing analytical model in order to add the bolts' preload as a parameter. These two models, namely the finite element model and the analytical model

  11. Delayed gadolinium-enhanced magnetic resonance imaging of hip joint cartilage: pearls and pitfalls

    PubMed Central

    Bittersohl, Bernd; Zilkens, Christoph; Kim, Young-Jo; Werlen, Stefan; Siebenrock, Klaus A.; Mamisch, Tallal C.; Hosalkar, Harish S.

    2011-01-01

    With the increasing advances in hip joint preservation surgery, accurate diagnosis and assessment of femoral head and acetabular cartilage status is becoming increasingly important. Magnetic resonance imaging (MRI) of the hip does present technical difficulties. The fairly thin cartilage lining necessitates high image resolution and high contrast-to-noise ratio (CNR). With MR arthrography (MRA) using intraarticular injected gadolinium, labral tears and cartilage clefts may be better identified through the contrast medium filling into the clefts. However, the ability of MRA to detect varying grades of cartilage damage is fairly limited and early histological and biochemical changes in the beginning of osteoarthritis (OA) cannot be accurately delineated. Traditional MRI thus lacks the ability to analyze the biological status of cartilage degeneration. The technique of delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) is sensitive to the charge density of cartilage contributed by glycosaminoglycans (GAGs), which are lost early in the process of OA. Therefore, the dGEMRIC technique has a potential to detect early cartilage damage that is obviously critical for decision-making regarding time and extent of intervention for joint-preservation. In the last decade, cartilage imaging with dGEMRIC has been established as an accurate and reliable tool for assessment of cartilage status in the knee and hip joint. This review outlines the current status of dGEMRIC for assessment of hip joint cartilage. Practical modifications of the standard technique including three-dimensional (3D) dGEMRIC and dGEMRIC after intra-articular gadolinium instead of iv-dGEMRIC will also be addressed. PMID:22053252

  12. Delayed gadolinium-enhanced magnetic resonance imaging of hip joint cartilage: pearls and pitfalls.

    PubMed

    Bittersohl, Bernd; Zilkens, Christoph; Kim, Young-Jo; Werlen, Stefan; Siebenrock, Klaus A; Mamisch, Tallal C; Hosalkar, Harish S

    2011-01-01

    With the increasing advances in hip joint preservation surgery, accurate diagnosis and assessment of femoral head and acetabular cartilage status is becoming increasingly important. Magnetic resonance imaging (MRI) of the hip does present technical difficulties. The fairly thin cartilage lining necessitates high image resolution and high contrast-to-noise ratio (CNR). With MR arthrography (MRA) using intraarticular injected gadolinium, labral tears and cartilage clefts may be better identified through the contrast medium filling into the clefts. However, the ability of MRA to detect varying grades of cartilage damage is fairly limited and early histological and biochemical changes in the beginning of osteoarthritis (OA) cannot be accurately delineated. Traditional MRI thus lacks the ability to analyze the biological status of cartilage degeneration. The technique of delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) is sensitive to the charge density of cartilage contributed by glycosaminoglycans (GAGs), which are lost early in the process of OA. Therefore, the dGEMRIC technique has a potential to detect early cartilage damage that is obviously critical for decision-making regarding time and extent of intervention for joint-preservation. In the last decade, cartilage imaging with dGEMRIC has been established as an accurate and reliable tool for assessment of cartilage status in the knee and hip joint.This review outlines the current status of dGEMRIC for assessment of hip joint cartilage. Practical modifications of the standard technique including three-dimensional (3D) dGEMRIC and dGEMRIC after intra-articular gadolinium instead of iv-dGEMRIC will also be addressed. PMID:22053252

  13. Joint swelling

    MedlinePlus

    Swelling of a joint ... Joint swelling may occur along with joint pain . The swelling may cause the joint to appear larger or abnormally shaped. Joint swelling can cause pain or stiffness. After an ...

  14. Modelisation numerique des phenomenes physiques du soudage par friction-malaxage et comportement en fatigue de joints soudes en aluminium 7075-T6

    NASA Astrophysics Data System (ADS)

    Gemme, Frederic

    The aim of the present research project is to increase the amount of fundamental knowledge regarding the process by getting a better understanding of the physical phenomena involved in friction stir welding (FSW). Such knowledge is required to improve the process in the context of industrial applications. In order to do so, the first part of the project is dedicated to a theoretical study of the process, while the microstructure and the mechanical properties of welded joints obtained in different welding conditions are measured and analyzed in the second part. The combination of the tool rotating and translating movements induces plastic deformation and heat generation of the welded material. The material thermomechanical history is responsible for metallurgical phenomena occurring during FSW such as recrystallization and precipitate dissolution and coarsening. Process modelling is used to reproduce this thermomechanical history in order to predict the influence of welding on the material microstructure. It is helpful to study heat generation and heat conduction mechanisms and to understand how joint properties are related to them. In the current work, a finite element numerical model based on solid mechanics has been developed to compute the thermomechanical history of the welded material. The computation results were compared to reference experimental data in order to validate the model and to calibrate unknown physical parameters. The model was used to study the effect of the friction coefficient on the thermomechanical history. Results showed that contact conditions at the workpiece/tool interface have a strong effect on relative amounts of heat generated by friction and by plastic deformation. The comparison with the experimental torque applied by the tool for different rotational speeds has shown that the friction coefficient decreases when the rotational speed increases. Consequently, heat generation is far more important near the material/tool interface and

  15. Single-row vs. double-row arthroscopic rotator cuff repair: clinical and 3 Tesla MR arthrography results

    PubMed Central

    2013-01-01

    Background Arthroscopic rotator cuff repair has become popular in the last few years because it avoids large skin incisions and deltoid detachment and dysfunction. Earlier arthroscopic single-row (SR) repair methods achieved only partial restoration of the original footprint of the tendons of the rotator cuff, while double-row (DR) repair methods presented many biomechanical advantages and higher rates of tendon-to-bone healing. However, DR repair failed to demonstrate better clinical results than SR repair in clinical trials. MR imaging at 3 Tesla, especially with intra-articular contrast medium (MRA), showed a better diagnostic performance than 1.5 Tesla in the musculoskeletal setting. The objective of this study was to retrospectively evaluate the clinical and 3 Tesla MRA results in two groups of patients operated on for a medium-sized full-thickness rotator cuff tear with two different techniques. Methods The first group consisted of 20 patients operated on with the SR technique; the second group consisted of 20 patients operated on with the DR technique. All patients were evaluated at a minimum of 3 years after surgery. The primary end point was the re-tear rate at 3 Tesla MRA. The secondary end points were the Constant-Murley Scale (CMS), the Simple Shoulder Test (SST) scores, surgical time and implant expense. Results The mean follow-up was 40 months in the SR group and 38.9 months in the DR group. The mean postoperative CMS was 70 in the SR group and 68 in the DR group. The mean SST score was 9.4 in the SR group and 10.1 in the DR group. The re-tear rate was 60% in the SR group and 25% in the DR group. Leakage of the contrast medium was observed in all patients. Conclusions To the best of our knowledge, this is the first report on 3 Tesla MRA in the evaluation of two different techniques of rotator cuff repair. DR repair resulted in a statistically significant lower re-tear rate, with longer surgical time and higher implant expense, despite no difference in clinical outcomes. We think that leakage of the contrast medium is due to an incomplete tendon-to-bone sealing, which is not a re-tear. This phenomenon could have important medicolegal implications. Level of evidence III. Treatment study: Case–control study. PMID:23351978

  16. Modelisation numerique et algebrique des joints labyrinthe des turbines francis

    NASA Astrophysics Data System (ADS)

    Bouderlique, Remi

    There are various types of hydraulic turbines. Regarding the operating conditions, geometries and technologies differ. Hydraulic seals are only used in Francis turbines, which are widely used. The role of hydraulic seals is not to be waterproof. Their main aim is to prevent contact between the rotating and static parts of the turbine. Although necessary, hydraulic seals create energetic losses : some fluid does not flow through the runner (leakage loss) and exerts a torque on the rotor (friction loss). In a context of constant progression towards still more efficient turbines, the optimization of each part of the turbine is necessary. Our study is a part of this research seeking to decrease the losses in turbines as much as possible. In order to understand fully the problem, and to ensure an optimal seal exists, an analytical study has been lead in the first place. It establishes the analytical expressions of the speeds, pressure, losses and optimal seal length for laminar flows in straight seals. Various tests were then lead with the ANSYS CFX solver in order to highlight aspects which necessitate a particular attention. For example, the issues of boundary conditions and dimensionless simulations were adressed. A CFD model has then been validated. The results of the experiences lead in the sixties by Dominion Engineering Works, which later became Andritz Hydro Limited, were used in this process. Even if all the tests were not useable, some of them were reproduced numerically. The CFD model which was used features SST turbulence modeling, 2D axisymmetric geometries, parabolic mesh distributions, smooth walls, and a outlet headloss based on the normal speed. For the various tests which were considered, the average discrepancy between numerical and experimental results is 6.5%. More than 60% of the discrepancies of those simulations are below the empirical uncertainty. That is why this model can be used for numerical experiences : as long as these experiences are in the design space, their result will be coherent with reality. An appropriate space-filling design of experiments was created using the software JMP, from SAS Institute. The numerical results of 34 tests have then been modeled statistically using a quadratic polynomial taking into account interactions between various factors. The response surface obtained this way was compared to experimental results. The average discrepancy was around 7.5%. The response surface is precise enough to get an accurate estimation of the experimental results. As no other experimental data is available, nothing proves that the numerical model, and the statistical model which was obtained thanks to it, will be valid outside the design space which was considered.

  17. Hypermobile joints

    MedlinePlus

    ... too far. In children with hypermobility syndrome, those ligaments are loose or weak. This may lead to: Arthritis, which may develop over time Dislocated joints, which is a separation of two bones where they meet at a joint Sprains and strains Children with hypermobile joints also often have flat ...

  18. Joint Disorders

    MedlinePlus

    A joint is where two or more bones come together, like the knee, hip, elbow, or shoulder. Joints can be damaged by many types of injuries or diseases, including Arthritis - inflammation of a joint. It causes pain, stiffness, and swelling. Over time, ...

  19. Des Moines.

    ERIC Educational Resources Information Center

    Gore, Deborah, Ed.

    1988-01-01

    This document, intended for elementary students, contains articles and activities designed to acquaint young people with the history of Des Moines, Iowa. The articles are short, and new or difficult words are highlighted and defined for young readers. "The Raccoon River Indian Agency" discusses the archeological exploration of the indian…

  20. Ceramic joints

    DOEpatents

    Miller, Bradley J.; Patten, Jr., Donald O.

    1991-01-01

    Butt joints between materials having different coefficients of thermal expansion are prepared having a reduced probability of failure of stress facture. This is accomplished by narrowing/tapering the material having the lower coefficient of thermal expansion in a direction away from the joint interface and not joining the narrow-tapered surface to the material having the higher coefficient of thermal expansion.

  1. Temporomandibular Joint, Closed

    MedlinePlus

    ... Oral Health > The Temporomandibular Joint, Closed The Temporomandibular Joint, Closed Main Content Title: The Temporomandibular Joint, Closed Description: The temporomandibular joint connects the lower ...

  2. Compliant joint

    NASA Technical Reports Server (NTRS)

    Eklund, Wayne D. (Inventor); Kerley, James J. (Inventor)

    1990-01-01

    A compliant joint is provided for prosthetic and robotic devices which permits rotation in three different planes. The joint provides for the controlled use of cable under motion. Perpendicular outer mounting frames are joined by swaged cables that interlock at a center block. Ball bearings allow for the free rotation of the second mounting frame relative to the first mounting frame within a predetermined angular rotation that is controlled by two stop devices. The cables allow for compliance at the stops and the cables allow for compliance in six degrees of freedom enabling the duplication or simulation of the rotational movement and flexibility of a natural hip or knee joint, as well as the simulation of a joint designed for a specific robotic component for predetermined design parameters.

  3. Joint pain

    MedlinePlus

    ... or conditions. It may be linked to arthritis , bursitis , and muscle pain . No matter what causes it, ... Autoimmune diseases such as rheumatoid arthritis and lupus Bursitis Chondromalacia patellae Crystals in the joint: gout (especially ...

  4. Joint Problems

    MedlinePlus

    ... ankles and toes. Other types of arthritis include gout or pseudogout. Sometimes, there is a mechanical problem ... for more information on osteoarthritis, rheumatoid arthritis and gout. How Common are Joint Problems? Osteoarthritis, which affects ...

  5. Hip Imaging in Athletes: Sports Imaging Series.

    PubMed

    Agten, Christoph A; Sutter, Reto; Buck, Florian M; Pfirrmann, Christian W A

    2016-08-01

    Hip or groin pain in athletes is common and clinical presentation is often nonspecific. Imaging is a very important diagnostic step in the work-up of athletes with hip pain. This review article provides an overview on hip biomechanics and discusses strategies for hip imaging modalities such as radiography, ultrasonography, computed tomography, and magnetic resonance (MR) imaging (MR arthrography and traction MR arthrography). The authors explain current concepts of femoroacetabular impingement and the problem of high prevalence of cam- and pincer-type morphology in asymptomatic persons. With the main focus on MR imaging, the authors present abnormalities of the hip joint and the surrounding soft tissues that can occur in athletes: intraarticular and extraarticular hip impingement syndromes, labral and cartilage disease, microinstability of the hip, myotendinous injuries, and athletic pubalgia. (©) RSNA, 2016. PMID:27429142

  6. Joint lubrication.

    PubMed

    McCutchen, C W

    1983-01-01

    The fine-pored, easily compressed articular cartilage provides animal joints with self-pressurized hydrostatic (weeping) lubrication. The solid skeletons of the cartilages press against each other, but so lightly that their rubbing is lubricated successfully by synovial fluid--a boundary lubricant too weak to lubricate ordinary bearings. PMID:6317095

  7. Joint assembly

    NASA Technical Reports Server (NTRS)

    Wilson, Andrew (Inventor); Punnoose, Andrew (Inventor); Strausser, Katherine (Inventor); Parikh, Neil (Inventor)

    2010-01-01

    A joint assembly is provided which includes a drive assembly and a swivel mechanism. The drive assembly features a motor operatively associated with a plurality of drive shafts for driving auxiliary elements, and a plurality of swivel shafts for pivoting the drive assembly. The swivel mechanism engages the swivel shafts and has a fixable element that may be attached to a foundation. The swivel mechanism is adapted to cooperate with the swivel shafts to pivot the drive assembly with at least two degrees of freedom relative to the foundation. The joint assembly allows for all components to remain encased in a tight, compact, and sealed package, making it ideal for space, exploratory, and commercial applications.

  8. Joint Instability and Osteoarthritis

    PubMed Central

    Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

    2015-01-01

    Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

  9. Joint instability and osteoarthritis.

    PubMed

    Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

    2015-01-01

    Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

  10. Joint x-ray

    MedlinePlus

    X-ray - joint; Arthrography; Arthrogram ... x-ray technologist will help you position the joint to be x-rayed on the table. Once in place, pictures are taken. The joint may be moved into other positions for more ...

  11. Spacesuit mobility knee joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1979-01-01

    Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  12. Spacesuit mobility joints

    NASA Technical Reports Server (NTRS)

    Vykukal, H. C. (Inventor)

    1978-01-01

    Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

  13. Des ballons pour demain

    NASA Astrophysics Data System (ADS)

    Régipa, R.

    A partir d'une théorie sur la détermination des formes et des contraintes globales d'un ballon de révolution, ou s'en rapprochant, une nouvelle famille de ballons a été définie. Les ballons actuels, dits de ``forme naturelle'', sont calculés en général pour une tension circonférencielle nulle. Ainsi, pour une mission donnée, la tension longitudinale et la forme de l'enveloppe sont strictement imposées. Les ballons de la nouvelle génération sont globalement cylindriques et leurs pôles sont réunis par un câble axial, chargé de transmettre une partie des efforts depuis le crochet (pôle inférieur), directement au pôle supérieur. De plus, la zone latérale cylindrique est soumise à un faible champ de tensions circonférencielles. Ainsi, deux paramètres permettent de faire évoluer la distribution des tensions et la forme de l'enveloppe: - la tension du câble de liaison entre pôles (ou la longueur de ce câble) - la tension circonférencielle moyenne désirée (ou le rayon du ballon). On peut donc calculer et réaliser: - soit des ballons de forme adaptée, comme les ballons à fond plat pour le bon fonctionnement des montgolfières infrarouge (projet MIR); - soit des ballons optimisés pour une bonne répartition des contraintes et une meilleure utilisation des matériaux d'enveloppe, pour l'ensemble des programmes stratosphériques. Il s'ensuit une économie sensible des coûts de fabrication, une fiabilité accrue du fonctionnement de ces ballons et une rendement opérationnel bien supérieur, permettant entre autres, d'envisager des vols à très haute altitude en matériaux très légers.

  14. Joint fluid Gram stain

    MedlinePlus

    Gram stain of joint fluid ... A sample of joint fluid is needed. The fluid sample is sent to a lab where a small drop is placed in a ... on how to prepare for the removal of joint fluid, see joint fluid aspiration .

  15. Amputation des quatre membres

    PubMed Central

    Feruzi, Maruis Kitembo; Milindi, Cédrick Sangwa; Zabibu, Mireille Kakinga; Mulefu, Jules Panda; Katombe, Francois Tshilombo

    2014-01-01

    Les auteurs présentent les cas d'amputation des quatre membres réalisée chez trois patients différents. Ce sont des amputations réalisées pour chaque patient au cours d'une seule hospitalisation et en un seul temps opératoire. Deux patients pour gangrène sèche infectée et un pour amputation traumatique des quatre membres. L'amputation d'urgence a été pratiquée en premier temps suivie de remodelage des moignons d'amputation en second temps. L’évolution de tous les patients a été bonne. PMID:25469177

  16. Butt Joint Tool Commissioning

    SciTech Connect

    Martovetsky, N N

    2007-12-06

    ITER Central Solenoid uses butt joints for connecting the pancakes in the CS module. The principles of the butt joining of the CICC were developed by the JAPT during CSMC project. The difference between the CSMC butt joint and the CS butt joint is that the CS butt joint is an in-line joint, while the CSMC is a double joint through a hairpin jumper. The CS butt joint has to carry the hoop load. The straight length of the joint is only 320 mm, and the vacuum chamber around the joint has to have a split in the clamp shell. These requirements are challenging. Fig.1 presents a CSMC joint, and Fig.2 shows a CS butt joint. The butt joint procedure was verified and demonstrated. The tool is capable of achieving all specified parameters. The vacuum in the end was a little higher than the target, which is not critical and readily correctable. We consider, tentatively that the procedure is established. Unexpectedly, we discover significant temperature nonuniformity in the joint cross section, which is not formally a violation of the specs, but is a point of concern. All testing parameters are recorded for QA purposes. We plan to modify the butt joining tool to improve its convenience of operation and provide all features necessary for production of butt joints by qualified personnel.

  17. Hip joint replacement - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100006.htm Hip joint replacement - series—Normal anatomy To use the sharing ... to slide 5 out of 5 Overview The hip joint is made up of two major parts: the ...

  18. Hip joint injection

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007633.htm Hip joint injection To use the sharing features on this ... injection is a shot of medicine into the hip joint. The medicine helps relieve pain and inflammation. It ...

  19. Hip joint replacement

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002975.htm Hip joint replacement To use the sharing features on this page, please enable JavaScript. Hip joint replacement is surgery to replace all or part ...

  20. Metatarsal phalangeal joint arthroscopy.

    PubMed

    Shonka, T E

    1991-01-01

    An overview of metatarsophalangeal joint (MPJ) arthroscopy is presented. Indications, technique, and perioperative management are discussed. The author believes it is the operative treatment of choice for various pathology encountered in this joint. PMID:2002183

  1. Culture - joint fluid

    MedlinePlus

    Joint fluid culture ... fungi, or viruses grow. This is called a culture. If these germs are detected, other tests may ... is no special preparation needed for the lab culture. How to prepare for the removal of joint ...

  2. Knee joint replacement - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100088.htm Knee joint replacement - series—Normal anatomy To use the sharing ... of 4 Overview The knee is a complex joint. It contains the distal end of the femur ( ...

  3. Knee joint replacement

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002974.htm Knee joint replacement To use the sharing features on this page, please enable JavaScript. Knee joint replacement is a surgery to replace a knee ...

  4. Large displacement spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2002-01-01

    A new class of spherical joints has a very large accessible full cone angle, a property which is beneficial for a wide range of applications. Despite the large cone angles, these joints move freely without singularities.

  5. Temporomandibular Joint Dysfunction

    MedlinePlus

    The temporomandibular joint (TMJ) connects your jaw to the side of your head. When it works well, it enables you to ... For people with TMJ dysfunction, problems with the joint and muscles around it may cause Pain that ...

  6. Sacroiliac joint pain - aftercare

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000610.htm Sacroiliac joint pain - aftercare To use the sharing features on this page, please enable JavaScript. The sacroiliac joint (SIJ) is a term used to describe the ...

  7. Sacroiliac joint imaging.

    PubMed

    Tuite, Michael J

    2008-03-01

    The sacroiliac (SI) joint has several unique anatomical features that make it one of the more challenging joints to image. The joint is difficult to profile well on radiographic views, and therefore the radiographic findings of sacroiliitis are often equivocal. Computed tomography images can usually show the findings of sacroiliitis and osteoarthritis earlier than radiographs. Magnetic resonance imaging performed with proper sequences is excellent for diagnosing even very early sacroiliitis and for following treatment response. The SI joint is often involved in patients with osteoarthritis or one of the inflammatory spondyloarthritides, most notably ankylosing spondylitis. Ankylosing spondylitis often presents with sacroiliitis, which appears as erosions, sclerosis, and joint space narrowing, eventually leading to ankylosis. Several disorders can cause sacroiliitis-like changes of the joint, including hyperparathyroidism and repetitive shear-stress injuries in athletes. The joint can become painful during pregnancy as it widens and develops increased motion, and some postpartum women develop iliac sclerosis adjacent to the joint termed osteitis condensans ilii. Another cause of SI joint pain is a disorder called sacroiliac joint dysfunction, which typically has few abnormal imaging findings. Patients with SI joint dysfunction, as well as sacroiliitis, often get relief from image-guided SI joint therapeutic injections. PMID:18382946

  8. Joint Enrollment Report, 2014

    ERIC Educational Resources Information Center

    Iowa Department of Education, 2014

    2014-01-01

    The Iowa Department of Education collects information on joint enrollment in Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus (SYP) programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

  9. Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Arch & Chord Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie & Diagonal Brace Joint Detail; Chord, Panel Post, Tie & Crossbracing Joint Detail - Dunlapsville Covered Bridge, Spanning East Fork Whitewater River, Dunlapsville, Union County, IN

  10. Catalog Production for the DES Blind Cosmology Challenge

    NASA Astrophysics Data System (ADS)

    Busha, Michael T.; Wechsler, R. H.; Becker, M. R.; Erickson, B.; Evrard, A. E.

    2013-01-01

    The Blind Cosmology Challenge (BCC) is an effort by the Dark Energy Survey (DES) to test analysis tools for extracting cosmological information using a set of detailed synthetic galaxy catalogs. Here, we describe the creation of these synthetic sky catalogs based on requirements of the optical (DES) and the near-IR VISTA Hemisphere Survey, producing catalogs covering a quarter of the sky to z ˜ 2, with sources complete to r ˜ 25. Starting with a nested set of lightcone outputs of large, N-body simulation, galaxies are assigned to the dark matter distribution using an empirical algorithm that is tunable to match observed evolution of low-order galaxy population properties (counts and spatial clustering) in luminosity-color-density space. Galaxies are lensed by matter along the line of sight (including magnification, shape distortion, and multiple images), using a new algorithm that calculates shear with 3.22 arcsec resolution at galaxy positions in the full catalog. The catalog is well suited to support DES+VISTA joint studies of galaxy clustering, groups and clusters of galaxies, and gravitational lensing, and we highlight their application to the ongoing DES BBCC. Catalogs include ˜320 million galaxies and ˜150 million stars, with realistic colors, shapes and photometric errors. Using the expected DES photometric errors, three independent photometric redshift codes are run on the catalog, two of which produce full probability distributions. The synthetic observable catalog includes object position, magnitudes in the DES and VISTA bands, photometric errors, photometric redshifts, size, ellipticity, for each of ˜ 500 million objects. The galaxy distribution is additionally masked appropriately for the 5000 square degree DES footprint, including the impact of bright stars. In addition, we offer separate catalogs with magnitudes for additional existing and planned surveys, including SDSS, CFHTLS, HSC, LSST, and Euclid.

  11. Des Vents et des Jets Astrophysiques

    NASA Astrophysics Data System (ADS)

    Sauty, C.

    well expected result from the theory. Although, collimation may be conical, paraboloidal or cylindrical (Part 4), cylindrical collimation is the more likely to occur. The shape of outflows may then be used as a tool to predict physical conditions on the flows or on their source. L'éjection continue de plasma autour d'objets massifs est un phénomène largement répandu en astrophysique, que ce soit sous la forme du vent solaire, de vents stellaires, de jets d'étoiles en formation, de jets stellaires autour d'objets compacts ou de jets extra-galactiques. Cette zoologie diversifiée fait pourtant l'objet d'un commun effort de modélisation. Le but de cette revue est d'abord de présenter qualitativement le développement, depuis leur origine, des diverses théories de vents (Partie 1) et l'inter disciplinarité dans ce domaine. Il s'agit d'une énumération, plus ou moins exhaustive, des idées proposées pour expliquer l'accélération et la morphologie des vents et des jets, accompagnée d'une présentation sommaire des aspects observationnels. Cette partie s'abstient de tout aspect faisant appel au formalisme mathématique. Ces écoulements peuvent être décrits, au moins partiellement, en résolvant les équations magnétohydrodynamiques, axisymétriques et stationnaires. Ce formalisme, à la base de la plupart des théories, est exposé dans la Partie 2. Il permet d'introduire quantitativement les intégrales premières qu'un tel système possède. Ces dernières sont amenées à jouer un rôle important dans la compréhension des phénomènes d'accélération ou de collimation, en particulier le taux de perte de masse, le taux de perte de moment angulaire ou l'énergie du rotateur magnétique. La difficulté de modélisation réside dans l'existence de points critiques, propres aux équations non linéaires, qu'il faut franchir. La nature physique et la localisation de ces points critiques fait l'objet d'un débat important car ils sont la clef de voute de la r

  12. Pipeline joint protector

    SciTech Connect

    Baker, R.

    1989-02-28

    This patent describes a weight coated pipeline joint protective apparatus for protecting pipeline joints against impact or high stress concentrations. It consists of a high density plastic sheet wrapped around a pipeline joint with the opposite edges of such sheet overlaying the weight of coat material on the abutting pipes forming the joint. The first end of the sheet overlaps the wrapped sheet with means for securing such first end to the sheet surface near or adjacent to the opposite end of such sheet.

  13. Sacroiliac joint pain - aftercare

    MedlinePlus

    The sacroiliac joint (SIJ) is a term used to describe the place where the sacrum and the iliac bones join. The ... The main purpose of the joint is to connect the spine and the pelvis. As a result, there is very little movement at the SIJ. Major reasons ...

  14. Compound solder joints

    NASA Technical Reports Server (NTRS)

    Batista, R. I.; Simonson, R. B.

    1976-01-01

    Joining technique prevents contamination, may be used to join dissimilar metal tubes, minimizes fluid and gas entrapment, expedites repairs, and can yield joints having leakage rates less than 0.000001 standard cubic cm He/min. Components of joint are solder sleeve, two solder rings, Teflon sleeve, and tubing to be joined.

  15. Wedge Joints for Trusses

    NASA Technical Reports Server (NTRS)

    Wood, Kenneth E.

    1987-01-01

    Structure assembled rapidly with simple hand tools. Proposed locking wedge joints enable rapid assembly of lightweight beams, towers, scaffolds, and other truss-type structures. Lightweight structure assembled from tubular struts joined at nodes by wedge pins fitting into mating slots. Joint assembled rapidly by seating wedge pin in V-shaped slots and deforming end of strut until primary pawl engages it.

  16. "Nonfloating" universal joint

    NASA Technical Reports Server (NTRS)

    Appleberry, W. T.

    1978-01-01

    Modified crowned-spline joint is lightweight, durable, and requires minimum of parts. It does not use rubber cushions to limit play and is useful over wide temperature range. It has inner ball and socket to provide rigid connection with no axial play. Joint can be adapted to form pinned connection between segmented torque tubes.

  17. Reticulation des fibres lignocellulosiques

    NASA Astrophysics Data System (ADS)

    Landrevy, Christel

    Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

  18. MISR JOINT_AS Data

    Atmospheric Science Data Center

    2014-07-21

    Joint Aerosol Product (JOINT_AS) The MISR Level 3 Products are global or regional ... field campaigns at daily and monthly time scales. The Joint Aerosol product provides a monthly global statistical summary of MISR ...

  19. Pressure vessel flex joint

    NASA Technical Reports Server (NTRS)

    Kahn, Jon B. (Inventor)

    1992-01-01

    An airtight, flexible joint is disclosed for the interfacing of two pressure vessels such as between the Space Station docking tunnel and the Space Shuttle Orbiter bulkhead adapter. The joint provides for flexibility while still retaining a structural link between the two vessels required due to the loading created by the internal/external pressure differential. The joint design provides for limiting the axial load carried across the joint to a specific value, a function returned in the Orbiter/Station tunnel interface. The flex joint comprises a floating structural segment which is permanently attached to one of the pressure vessels through the use of an inflatable seal. The geometric configuration of the joint causes the tension between the vessels created by the internal gas pressure to compress the inflatable seal. The inflation pressure of the seal is kept at a value above the internal/external pressure differential of the vessels in order to maintain a controlled distance between the floating segment and pressure vessel. The inflatable seal consists of either a hollow torus-shaped flexible bladder or two rolling convoluted diaphragm seals which may be reinforced by a system of straps or fabric anchored to the hard structures. The joint acts as a flexible link to allow both angular motion and lateral displacement while it still contains the internal pressure and holds the axial tension between the vessels.

  20. First metatarsophalangeal joint arthrodesis.

    PubMed

    Rajczy, Robert M; McDonald, Patrick R; Shapiro, Howard S; Boc, Steven F

    2012-01-01

    Arthrodesis of the first metatarsophalangeal joint (MTPJ) is used primarily for end-stage hallux rigidus whereby pain, crepitus, and limitation of motion is noted at the joint. Arthrodesis at the first MTPJ also has it uses as a primary procedure for rheumatoid arthritis when severe deformity is present, as well as for salvage procedures for failed joint arthroplasties with or without implant, fractures with intra-articular extension, avascular necrosis, and infection management. A first MTPJ arthrodesis should provide stable fixation, attain suitable positioning for a reasonable gait, maintain adequate length, and create a stable platform for a plantigrade foot type. PMID:22243568

  1. Compliant Joints For Robots

    NASA Technical Reports Server (NTRS)

    Kerley, James J., Jr.

    1990-01-01

    Compliant joints devised to accommodate misalignments of tools and/or workpieces with respect to robotic manipulators. Has characteristics and appearance of both universal-joint and cable-spring-type flexible shaft coupling. Compliance derived from elastic properties of short pieces of cable. Compliance of joint determined by lengths, distances between, relative orientations, thickness of strands, number of strands, material, amount of pretwist, and number of short pieces of cable. Worm-drive mechanism used to adjust lengths to vary compliance as needed during operation.

  2. Improved orthopedic arm joint

    NASA Technical Reports Server (NTRS)

    Dane, D. H.

    1971-01-01

    Joint permits smooth and easy movement of disabled arm and is smaller, lighter and less expensive than previous models. Device is interchangeable and may be used on either arm at the shoulder or at the elbow.

  3. Knee joint replacement

    MedlinePlus

    The results of a total knee replacement are often excellent. The operation relieves pain for most people. Most people do not need help walking after they fully recover. Most artificial knee joints last 10 ...

  4. Joint fluid Gram stain

    MedlinePlus

    Gram stain of joint fluid ... result means no bacteria are present on the Gram stain. Normal value ranges may vary slightly among ... Abnormal results mean bacteria were seen on the Gram stain. This may be a sign of a ...

  5. Temporomandibular Joint Disorder

    MedlinePlus

    ... 2008 Previous Next Related Articles: Temporomandibular Joint Disorder (TMD) Are You Biting Off More Than You Can Chew? Equilibration May Lessen TMD Pain Fender-benders: Source of TMD? First Comes ...

  6. A symptomatic coracoclavicular joint.

    PubMed

    Cheung, T F S; Boerboom, A L; Wolf, R F E; Diercks, R L

    2006-11-01

    Bilateral coracoclavicular joints were found in a 44-year-old male patient following a fall. He had an Indonesian mother and a Dutch father. Prior to the injury he was asymptomatic and had full range of movement in both shoulders but the trauma resulted in pain and limitation of movement in the left shoulder which required resection of the anomalous joint, after which full pain-free movement was restored. PMID:17075101

  7. Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Panel Post & Diagonal Brace Joint Detail; Crossbracing Center Joint Detail; Chord, Panel Post, Tie Bar, & Diagonal Brace Joint Detail; Chord, Tie Bar, & Crossbracing Joint Detail - Medora Bridge, Spanning East Fork of White River at State Route 235, Medora, Jackson County, IN

  8. High pressure ceramic joint

    DOEpatents

    Ward, Michael E.; Harkins, Bruce D.

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  9. High pressure ceramic joint

    DOEpatents

    Ward, M.E.; Harkins, B.D.

    1993-11-30

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

  10. Médecine des voyages

    PubMed Central

    Aw, Brian; Boraston, Suni; Botten, David; Cherniwchan, Darin; Fazal, Hyder; Kelton, Timothy; Libman, Michael; Saldanha, Colin; Scappatura, Philip; Stowe, Brian

    2014-01-01

    Résumé Objectif Définir la pratique de la médecine des voyages, présenter les éléments fondamentaux d’une consultation complète préalable aux voyages à des voyageurs internationaux et aider à identifier les patients qu’il vaudrait mieux envoyer en consultation auprès de professionnels de la médecine des voyages. Sources des données Les lignes directrices et les recommandations sur la médecine des voyages et les maladies liées aux voyages publiées par les autorités sanitaires nationales et internationales ont fait l’objet d’un examen. Une recension des ouvrages connexes dans MEDLINE et EMBASE a aussi été effectuée. Message principal La médecine des voyages est une spécialité très dynamique qui se concentre sur les soins préventifs avant un voyage. Une évaluation exhaustive du risque pour chaque voyageur est essentielle pour mesurer avec exactitude les risques particuliers au voyageur, à son itinéraire et à sa destination et pour offrir des conseils sur les interventions les plus appropriées en gestion du risque afin de promouvoir la santé et prévenir les problèmes médicaux indésirables durant le voyage. Des vaccins peuvent aussi être nécessaires et doivent être personnalisés en fonction des antécédents d’immunisation du voyageur, de son itinéraire et du temps qu’il reste avant son départ. Conclusion La santé et la sécurité d’un voyageur dépendent du degré d’expertise du médecin qui offre le counseling préalable à son voyage et les vaccins, au besoin. On recommande à ceux qui donnent des conseils aux voyageurs d’être conscients de l’ampleur de cette responsabilité et de demander si possible une consultation auprès de professionnels de la médecine des voyages pour tous les voyageurs à risque élevé.

  11. Distal radioulnar joint injuries.

    PubMed

    Thomas, Binu P; Sreekanth, Raveendran

    2012-09-01

    Distal radioulnar joint is a trochoid joint relatively new in evolution. Along with proximal radioulnar joint, forearm bones and interosseous membrane, it allows pronosupination and load transmission across the wrist. Injuries around distal radioulnar joint are not uncommon, and are usually associated with distal radius fractures,fractures of the ulnar styloid and with the eponymous Galeazzi or Essex_Lopresti fractures. The injury can be purely involving the soft tissue especially the triangular fibrocartilage or the radioulnar ligaments. The patients usually present with ulnar sided wrist pain, features of instability, or restriction of rotation. Difficulty in carrying loads in the hand is a major constraint for these patients. Thorough clinical examination to localize point of tenderness and appropriate provocative tests help in diagnosis. Radiology and MRI are extremely useful, while arthroscopy is the gold standard for evaluation. The treatment protocols are continuously evolving and range from conservative, arthroscopic to open surgical methods. Isolated dislocation are uncommon. Basal fractures of the ulnar styloid tend to make the joint unstable and may require operative intervention. Chronic instability requires reconstruction of the stabilizing ligaments to avoid onset of arthritis. Prosthetic replacement in arthritis is gaining acceptance in the management of arthritis. PMID:23162140

  12. Dissimilar metals joint evaluation

    NASA Technical Reports Server (NTRS)

    Wakefield, M. E.; Apodaca, L. E.

    1974-01-01

    Dissimilar metals tubular joints between 2219-T851 aluminum alloy and 304L stainless steel were fabricated and tested to evaluate bonding processes. Joints were fabricated by four processes: (1) inertia (friction) weldings, where the metals are spun and forced together to create the weld; (2) explosive welding, where the metals are impacted together at high velocity; (3) co-extrusion, where the metals are extruded in contact at high temperature to promote diffusion; and (4) swaging, where residual stresses in the metals after a stretching operation maintain forced contact in mutual shear areas. Fifteen joints of each type were prepared and evaluated in a 6.35 cm (2.50 in.) O.D. size, with 0.32 cm (0.13 in.) wall thickness, and 7.6 cm (3.0 in) total length. The joints were tested to evaluate their ability to withstand pressure cycle, thermal cycle, galvanic corrosion and burst tests. Leakage tests and other non-destructive test techniques were used to evaluate the behavior of the joints, and the microstructure of the bond areas was analyzed.

  13. Towards a Dynamic DES model

    NASA Astrophysics Data System (ADS)

    Subbareddy, Pramod; Candler, Graham

    2009-11-01

    Hybrid RANS/LES methods are being increasingly used for turbulent flow simulations in complex geometries. Spalart's detached eddy simulation (DES) model is one of the more popular ones. We are interested in examining the behavior of the Spalart-Allmaras (S-A) Detached Eddy Simulation (DES) model in its ``LES mode.'' The role of the near-wall functions present in the equations is analyzed and an explicit analogy between the S-A and a one-equation LES model based on the sub-grid kinetic energy is presented. A dynamic version of the S-A DES model is proposed based on this connection. Validation studies and results from DES and LES applications will be presented and the effect of the proposed modification will be discussed.

  14. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    NASA Astrophysics Data System (ADS)

    Benoit, Louis

    En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q<= m+1. L'entier m parametrise la charge centrale: c(m)=1 -{6over m(m+1)} avec n>= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations

  15. Periprosthetic joint infection.

    PubMed

    Kapadia, Bhaveen H; Berg, Richard A; Daley, Jacqueline A; Fritz, Jan; Bhave, Anil; Mont, Michael A

    2016-01-23

    Periprosthetic joint infections are a devastating complication after arthroplasty and are associated with substantial patient morbidity. More than 25% of revisions are attributed to these infections, which are expected to increase. The increased prevalence of obesity, diabetes, and other comorbidities are some of the reasons for this increase. Recognition of the challenge of surgical site infections in general, and periprosthetic joint infections particularly, has prompted implementation of enhanced prevention measures preoperatively (glycaemic control, skin decontamination, decolonisation, etc), intraoperatively (ultraclean operative environment, blood conservation, etc), and postoperatively (refined anticoagulation, improved wound dressings, etc). Additionally, indications for surgical management have been refined. In this Review, we assess risk factors, preventive measures, diagnoses, clinical features, and treatment options for prosthetic joint infection. An international consensus meeting about such infections identified the best practices and further research needs. Orthopaedics could benefit from enhanced preventive, diagnostic, and treatment methods. PMID:26135702

  16. Quick acting gimbal joint

    NASA Technical Reports Server (NTRS)

    Wood, William B. (Inventor); Krch, Gary D. (Inventor)

    1993-01-01

    The present invention relates to an adjustable linkage assembly for selectively retaining the position of one member pivotable with respect to another member. More specifically, the invention relates to a linkage assembly commonly referred to as a gimbal joint, and particularly to a quick release or quick acting gimbal joint. The assembly is relatively simple in construction, compact in size, and has superior locking strength in any selected position. The device can be quickly and easily actuated, without separate tooling, by inexperienced personnel or by computer controlled equipment. It also is designed to prevent inadvertent actuation.

  17. Prosthetic Joint Infection

    PubMed Central

    Tande, Aaron J.

    2014-01-01

    SUMMARY Prosthetic joint infection (PJI) is a tremendous burden for individual patients as well as the global health care industry. While a small minority of joint arthroplasties will become infected, appropriate recognition and management are critical to preserve or restore adequate function and prevent excess morbidity. In this review, we describe the reported risk factors for and clinical manifestations of PJI. We discuss the pathogenesis of PJI and the numerous microorganisms that can cause this devastating infection. The recently proposed consensus definitions of PJI and approaches to accurate diagnosis are reviewed in detail. An overview of the treatment and prevention of this challenging condition is provided. PMID:24696437

  18. Joint for deployable structures

    NASA Technical Reports Server (NTRS)

    Craighead, N. D., II; Preliasco, R. J.; Hult, T. D. (Inventor)

    1985-01-01

    A joint is described for connecting a pair of beams to pivot them between positions in alignment or beside one another, which is of light weight and which operates in a controlled manner. The joint includes a pair of fittings and at least one center link having opposite ends pivotally connected to opposite fittings and having axes that pass through centerplates of the fittings. A control link having opposite ends pivotally connected to the different fittings controls their relative orientations, and a toggle assemly holds the fittings in the deployed configuration wherein they are aligned. The fittings have stops that lie on one side of the centerplane opposite the toggle assembly.

  19. Mapping matter jointly with CMB lensing and Large Scale Structure

    NASA Astrophysics Data System (ADS)

    Huffenberger, Kevin; Rotti, Aditya; Maldonado, Felipe

    2016-01-01

    In the near future, Stage III and Stage IV Cosmic Microwave Background experiments will measure to high precision the lensing distortions that trace matter fluctuations in the universe. On a similar timescale DES, HSC, WFIRST, EUCLID, DESI, LSST, and other surveys will provide galaxy redshift information, imaging, and cosmic shear data over large regions of the sky. Taking a holistic, Bayesian approach to combine datasets, we seek to understand the statistical properties of joint estimates of the matter distribution and its correlations, including their non-Gaussian likelihoods.

  20. Flux distributions in jointed ? tapes

    NASA Astrophysics Data System (ADS)

    Koblischka, M. R.; Johansen, T. H.; Bratsberg, H.; Vase, P.

    1998-06-01

    Superconducting joints between monofilamentary, Ag-sheathed 0953-2048/11/6/005/img8 tapes were investigated by means of magneto-optic imaging. Two types of joint were studied; one joint with direct contact between the tape cores, and the other one with an Ag layer between them. The local flux distributions directly reveal the obstacles hindering the current flow through the joints. The direct contact of the tape cores provides joints which can carry about 80% of the current of the original tape, whereas the joints with the Ag layer are considerably worse. This difference becomes even more drastic in applied magnetic fields.

  1. Imaging the temporomandibular joint

    SciTech Connect

    Katzberg, R.W.; Manzione, J.V.; Westesson, P.L.

    1988-01-01

    This book encompasses all imaging modalities as they apply to the Temporomandibular Joint and its disorders. The volume employs correlative line drawings to elaborate on diagnostic images. It helps teach methods of TMJ imaging and describes findings identified by different imaging modalities to both radiologists and dental clinicians.

  2. First metatarsophalangeal joint arthrodesis.

    PubMed

    Yu, Gerard V; Gorby, Paul O

    2004-01-01

    First MTP joint arthrodesis continues to be a time-honored, effective, and valuable procedure as a primary or secondary surgery for various pathologies afflicting the first ray segment. Though commonly thought of as a salvage procedure, it has proven beneficial in the management of primary hallux limitus and rigidus, geriatric hallux valgus deformity, severe arthritis of any etiology, and conditions in which joint instability or deformity are not readily correctable by more traditional approaches. Since its initial description in the 1800s, the procedure has continued to be popular among orthopedic and podiatric surgeons. Success of the procedure is highly dependent on the position of fusion. Though surgeons are often fascinated and at times obsessed with a particular fixation technique, it cannot be over-emphasized that this takes a back seat to the importance of achieving proper position to meet the needs of an individual patient. Unlike joint resection or implant arthroplasty procedures, which commonly leave the hallux lacking stability and propulsion, first MPJ fusion has been shown to be effective during weight bearing and propulsion. The success enjoyed by the senior author continues to reinforce that motion is not necessary at the first MTP joint for good, pain-free function. PMID:15012033

  3. Human temporomandibular joint morphogenesis.

    PubMed

    Carini, Francesco; Scardina, Giuseppe Alessandro; Caradonna, Carola; Messina, Pietro; Valenza, Vincenzo

    2007-01-01

    Temporomandibular joint morphogenesis was studied. Ranging in age of fetuses examined was from 6 to14 weeks' gestation. Our results showed the condyle so first element that appear between 6 degrees and 8 degrees week (condylar blastema). After a week appear temporal elements. Disk appear at the same time of glenoid blastema and it reaches an advanced differentation before of the condyle and temporal element, so these don't effect machanical compression on mesenchyma where we find the disk. So we think that the disk result of genetic expression and it isn't the result of mechanical compression. The inferior joint cavity appear to 12 week. The superior joint cavity appear to 13-14 week. In conclusion, the appearance of the condyle is the first event during TMJ morphogenesis, with its initial bud, in form of a mesenchymal thickening, becoming detectable between the sixth and eight week of development, when all the large joints of the limbs are already well defined. PMID:18333411

  4. New Joint Sealants. Criteria, Design and Materials.

    ERIC Educational Resources Information Center

    Building Research Inst., Inc., Washington, DC.

    Contents include--(1) sealing concrete joints, (2) sealing glass and metal joints, (3) metal and glass joint sealants from a fabricator's viewpoint, (4) a theory of adhesion for joint sealants, (5) geometry of simple joint seals under strain, (6) joint sealant specifications from a manufacturer's viewpoint, (7) joint sealant requirements from an…

  5. Peste des petits ruminants

    PubMed Central

    Parida, S.; Muniraju, M.; Mahapatra, M.; Muthuchelvan, D.; Buczkowski, H.; Banyard, A.C.

    2015-01-01

    Peste des petits ruminants virus causes a highly infectious disease of small ruminants that is endemic across Africa, the Middle East and large regions of Asia. The virus is considered to be a major obstacle to the development of sustainable agriculture across the developing world and has recently been targeted by the World Organisation for Animal Health (OIE) and the Food and Agriculture Organisation (FAO) for eradication with the aim of global elimination of the disease by 2030. Fundamentally, the vaccines required to successfully achieve this goal are currently available, but the availability of novel vaccine preparations to also fulfill the requisite for differentiation between infected and vaccinated animals (DIVA) may reduce the time taken and the financial costs of serological surveillance in the later stages of any eradication campaign. Here, we overview what is currently known about the virus, with reference to its origin, updated global circulation, molecular evolution, diagnostic tools and vaccines currently available to combat the disease. Further, we comment on recent developments in our knowledge of various recombinant vaccines and on the potential for the development of novel multivalent vaccines for small ruminants. PMID:26443889

  6. Shoulder Joint For Protective Suit

    NASA Technical Reports Server (NTRS)

    Kosmo, Joseph J.; Smallcombe, Richard D.

    1994-01-01

    Shoulder joint allows full range of natural motion: wearer senses little or no resisting force or torque. Developed for space suit, joint offers advantages in protective garments for underwater work, firefighting, or cleanup of hazardous materials.

  7. Determination of Parachute Joint Factors using Seam and Joint Testing

    NASA Technical Reports Server (NTRS)

    Mollmann, Catherine

    2015-01-01

    This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

  8. Cellular Pressure-Actuated Joint

    NASA Technical Reports Server (NTRS)

    McGuire, John R.

    2003-01-01

    A modification of a pressure-actuated joint has been proposed to improve its pressure actuation in such a manner as to reduce the potential for leakage of the pressurizing fluid. The specific joint for which the modification is proposed is a field joint in a reusable solid-fuel rocket motor (RSRM), in which the pressurizing fluid is a mixture of hot combustion gases. The proposed modification could also be applicable to other pressure-actuated joints of similar configuration.

  9. Achieving joint benefits from joint implementation

    SciTech Connect

    Moomaw, W.R.

    1995-11-01

    Joint Implementation (JI) appears to have been born with Applied Energy Services Guatemala project in 1988. That project, to plant 52 million trees, protect existing forests from cutting and fire, and enhance rural development, is being implemented by CARE Guatemala to offset 120 per cent of the emissions of a small coal burning power plant that has been built in Connecticut. Since that time, several utilities and governments have initiated additional projects. Not all of these necessarily consist of tree planting in other countries, but may consist of energy efficiency or energy conservation programs designed to reduce carbon emissions by at least as much as the additional releases from a new facility. All JI projects share the characteristic of linking the release of greenhouse gases in an industrial country with an offset that reduces or absorbs a comparable amount in another country. The emitter in the industrial country is willing to pay for the reduction elsewhere because costs are less than they would be at home.

  10. Swivel Joint For Liquid Nitrogen

    NASA Technical Reports Server (NTRS)

    Milner, James F.

    1988-01-01

    Swivel joint allows liquid-nitrogen pipe to rotate through angle of 100 degree with respect to mating pipe. Functions without cracking hard foam insulation on lines. Pipe joint rotates on disks so mechanical stress not transmitted to thick insulation on pipes. Inner disks ride on fixed outer disks. Disks help to seal pressurized liquid nitrogen flowing through joint.

  11. Phase 1 Program Joint Report

    NASA Technical Reports Server (NTRS)

    Nield, George C. (Editor); Vorobiev, Pavel Mikhailovich (Editor)

    1999-01-01

    This report consists of inputs from each of the Phase I Program Joint Working Groups. The Working Groups were tasked to describe the organizational structure and work processes that they used during the program, joint accomplishments, lessons learned, and applications to the International Space Station Program. This report is a top-level joint reference document that contains information of interest to both countries.

  12. Method for reinforcing tubing joints

    NASA Technical Reports Server (NTRS)

    Kinzler, J.; Lee, W. S.

    1968-01-01

    Joint repair technique uses a longitudinally split aluminum shield over the joint ferrule and immediately adjacent tubing to reseal or reinforce leaking or weak joints in small tubing. Epoxy resin coating on inside surfaces of the two shield halves provides a tightly sealed bond between shield and tubing.

  13. Double slotted socket spherical joint

    DOEpatents

    Bieg, Lothar F.; Benavides, Gilbert L.

    2001-05-22

    A new class of spherical joints is disclosed. These spherical joints are capable of extremely large angular displacements (full cone angles in excess of 270.degree.), while exhibiting no singularities or dead spots in their range of motion. These joints can improve or simplify a wide range of mechanical devices.

  14. Joint hypermobility syndrome pain.

    PubMed

    Grahame, Rodney

    2009-12-01

    Joint hypermobility syndrome (JHS) was initially defined as the occurrence of musculoskeletal symptoms in the presence of joint laxity and hypermobility in otherwise healthy individuals. It is now perceived as a commonly overlooked, underdiagnosed, multifaceted, and multisystemic heritable disorder of connective tissue (HDCT), which shares many of the phenotypic features of other HDCTs such as Marfan syndrome and Ehlers-Danlos syndrome. Whereas the additional flexibility can confer benefits in terms of mobility and agility, adverse effects of tissue laxity and fragility can give rise to clinical consequences that resonate far beyond the confines of the musculoskeletal system. There is hardly a clinical specialty to be found that is not touched in one way or another by JHS. Over the past decade, it has become evident that of all the complications that may arise in JHS, chronic pain is arguably the most menacing and difficult to treat. PMID:19889283

  15. Analysis of minor fractures associated with joints and faulted joints

    NASA Astrophysics Data System (ADS)

    Cruikshank, Kenneth M.; Zhao, Guozhu; Johnson, Arvid M.

    In this paper, we use fracture mechanics to interpret conditions responsible for secondary cracks that adorn joints and faulted joints in the Entrada Sandstone in Arches National Park, U.S.A. Because the joints in most places accommodated shearing offsets of a few mm to perhaps 1 dm, and thus became faulted joints, some of the minor cracks are due to faulting. However, in a few places where the shearing was zero, one can examine minor cracks due solely to interaction of joint segments at the time they formed. We recognize several types of minor cracks associated with subsequent faulting of the joints. One is the kink, a crack that occurs at the termination of a straight joint and whose trend is abruptly different from that of the joint. Kinks are common and should be studied because they contain a great deal of information about conditions during fracturing. The sense of kinking indicates the sense of shear during faulting: a kink that turns clockwise with respect to the direction of the main joint is a result of right-lateral shear, and a kink that turns counterclockwise is a result of left-lateral shear. Furthermore, the kink angle is related to the ratio of the shear stress responsible for the kinking to the normal stress responsible for the opening of the joint. The amount of opening of a joint at the time it faulted or even at the time the joint itself formed can be estimated by measuring the kink angle and the amount of strike-slip at some point along the faulted joint. Other fractures that form near terminations of pre-existing joints in response to shearing along the joint are horsetail fractures. Similar short fractures can occur anywhere along the length of the joints. The primary value in recognizing these fractures is that they indicate the sense of faulting accommodated by the host fracture and the direction of maximum tension. Even where there has been insignificant regional shearing in the Garden Area, the joints can have ornate terminations. Perhaps

  16. Optimized bolted joint

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.; Bunin, B. L.; Watts, D. J. (Inventor)

    1986-01-01

    A method is disclosed for joining segments of the skin of an aircraft. The ends of the skin are positioned in close proximity or abutt each other. The skin is of constant thickness throughout the joint and is sandwiched between splice plates, which taper in thickness from the last to the first bolt rows in order to reduce the stiffness of the splice plate and thereby reduce the load transfer at the location where bypass loads are the highest.

  17. Prosthetic elbow joint

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce C. (Inventor)

    1994-01-01

    An artificial, manually positionable elbow joint for use in an upper extremity, above-elbow, prosthetic is described. The prosthesis provides a locking feature that is easily controlled by the wearer. The instant elbow joint is very strong and durable enough to withstand the repeated heavy loadings encountered by a wearer who works in an industrial, construction, farming, or similar environment. The elbow joint of the present invention comprises a turntable, a frame, a forearm, and a locking assembly. The frame generally includes a housing for the locking assembly and two protruding ears. The forearm includes an elongated beam having a cup-shaped cylindrical member at one end and a locking wheel having a plurality of holes along a circular arc on its other end with a central bore for pivotal attachment to the protruding ears of the frame. The locking assembly includes a collar having a central opening with a plurality of internal grooves, a plurality of internal cam members each having a chamfered surface at one end and a V-shaped slot at its other end; an elongated locking pin having a crown wheel with cam surfaces and locking lugs secured thereto; two coiled compression springs; and a flexible filament attached to one end of the elongated locking pin and extending from the locking assembly for extending and retracting the locking pin into the holes in the locking wheel to permit selective adjustment of the forearm relative to the frame. In use, the turntable is affixed to the upper arm part of the prosthetic in the conventional manner, and the cup-shaped cylindrical member on one end of the forearm is affixed to the forearm piece of the prosthetic in the conventional manner. The elbow joint is easily adjusted and locked between maximum flex and extended positions.

  18. Temporomandibular joint dislocation

    PubMed Central

    Sharma, Naresh Kumar; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal; Singh, Shreya

    2015-01-01

    Temporomandibular joint (TMJ) dislocation is an uncommon but debilitating condition of the facial skeleton. The condition may be acute or chronic. Acute TMJ dislocation is common in clinical practice and can be managed easily with manual reduction. Chronic recurrent TMJ dislocation is a challenging situation to manage. In this article, we discuss the comprehensive review of the different treatment modalities in managing TMJ dislocation. PMID:26668447

  19. Temporomandibular joint dislocation.

    PubMed

    Sharma, Naresh Kumar; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal; Singh, Shreya

    2015-01-01

    Temporomandibular joint (TMJ) dislocation is an uncommon but debilitating condition of the facial skeleton. The condition may be acute or chronic. Acute TMJ dislocation is common in clinical practice and can be managed easily with manual reduction. Chronic recurrent TMJ dislocation is a challenging situation to manage. In this article, we discuss the comprehensive review of the different treatment modalities in managing TMJ dislocation. PMID:26668447

  20. The neuropathic joint.

    PubMed

    Sequeira, W

    1994-01-01

    Neuropathic arthritis is a destructive arthropathy frequently associated with loss of proprioception. A third of patients, however, may have no demonstrable neurological deficit. Patients with diabetes, syphilis, syringomyelia and other neuropathies are particularly prone to developing this joint disease. The diagnosis of Charcot's joints should be considered in anyone who develops what appears to be a severe osteoarthritis or a transverse fracture of the tibia or fibula after minor trauma. Scoliosis with particularly destructive changes on radiography should prompt a search for syringomyelia or syphilis. The most common radiographic abnormalities are those of distension in 3D (Dislocation, Destruction and Degeneration). An atrophic form with resorption of the proximal humerus, most frequently described in syringomyelia, has been observed in diabetes. Loss of the distal end of the clavicle has not been described before in the neuropathies. These changes coupled with speckled calcification or shards of bone in the periarticular soft tissue confirm the diagnosis. Infection and CPPD crystal disease can be difficult to exclude. The joint fluid may be inflammatory and infection may be a complication. Treatment includes anti-inflammatories and splinting. Indications for surgery are limited. PMID:8070170

  1. Formation of tough composite joints

    SciTech Connect

    Brun, M.K.

    1997-05-01

    Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si{sub 3}N{sub 4}-coated fibers had a 0/90{degree} architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses.

  2. Classification of 20 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Davis, T. M.; Kim, A. G.; Macualay, E.; Lidman, C.; Sharp, R.; Tucker, B. E.; Yuan, F.; Zhang, B.; Lewis, G. F.; Sommer, N. E.; Martini, P.; Mould, J.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  3. Classification of 15 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Yuan, F.; Tucker, B. E.; Lidman, C.; Martini, P.; Gshwend, Julia; Moller, A.; Zhang, B.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  4. Classification of 3 DES Supernovae with OzDES

    NASA Astrophysics Data System (ADS)

    Moller, A.; Tucker, B. E.; Yuan, F.; Lewis, G.; Lidman, C.; Macaulay, E.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.

    2016-02-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  5. Classification of 4 DES supernovae by OzDES

    NASA Astrophysics Data System (ADS)

    Glazebrook, K.; Amon, A.; Lidman, C.; Martini, P.; Tucker, B. E.; Yuan, F.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Pan, Y.-C.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.; Kessler, R.; Lasker, J.; Scolnic, D.; Brout, D. J.; Gladney, L.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; Childress, M.; D'Andrea, C.; Smith, M.; Sullivan, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.

    2015-12-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  6. Classification of 6 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Lewis, G. F.; Mould, J.; Lidman, C.; Tucker, B. E.; Sharp, R.; Yuan, F.; Martini, P.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Casas, R.; Castander, F. J.; Desai, S.; Paech, K.; Smith, R. C.; Schubnell, M.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey (ATEL #4668). The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  7. Classification of 14 DES Supernova with OzDES

    NASA Astrophysics Data System (ADS)

    Tucker, B. E.; Sharp, R.; Yuan, F.; Zhang, B.; Lidman, C.; Davis, T. M.; Hinton, S.; Mould, J.; Smith, R. C.; Schubnell, M.; Kessler, R.; Scolnic, D.; Covarrubias, R. A.; Brout, D. J.; Fischer, J. A.; Gladney, L.; March, M.; Sako, M.; Wolf, R. C.; Brown, P. J.; Krisciunas, K.; Suntzeff, N.; Nichol, R.; Papadopoulos, A.; D'Andrea, C.; Smith, M.; Sullivan, M.; Childress, M.; Maartens, R.; Gupta, R.; Kovacs, E.; Kuhlmann, S.; Spinka, H.; Ahn, E.; Finley, D. A.; Frieman, J.; Marriner, J.; Wester, W.; Aldering, G.; Kim, A. G.; Thomas, R. C.; Barbary, K.; Bloom, J. S.; Goldstein, D.; Nugent, P.; Perlmutter, S.; Foley, R. J.; Castander, F. J.; Desai, S.; Paech, K.

    2015-10-01

    We report new spectroscopic classifications by OzDES of supernovae discovered by the Dark Energy Survey. The spectra (370-885nm) were obtained with the AAOmega Spectrograph (Saunders et al. 2004, SPIE, 5492, 389) and the 2dF fibre positioner at the Anglo-Australian Telescope (AAT).

  8. Improved high-temperature gimbal joint

    NASA Technical Reports Server (NTRS)

    Winemiller, J. R.; Yee, S. T.; Neal, B. H.

    1972-01-01

    Development and characteristics of bellows gimbal joint for reduction of thermal stress effects are discussed. Reactions of designed joint to changes in temperature are described. Illustrations of conventional gimbal joint and improved gimbal joint are provided.

  9. Formation of tough composite joints

    SciTech Connect

    Brun, M.K.

    1998-12-01

    Joints that exhibited tough fracture behavior were formed in a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure were proposed. Joints with a simple overlap geometry (only a few fingers) had to be very long in order to prevent brittle failure. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength, by changing the fiber coating, significantly increased matrix cracking and ultimate strength of the joints. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints should permit building of structures containing joints with only a minor reduction of design stresses.

  10. Small joint arthroscopy in foot and ankle.

    PubMed

    Lui, Tun Hing; Yuen, Chi Pan

    2015-03-01

    The clinical application of small joint arthroscopies (metatarsophalangeal joint, Lisfranc joint, Chopart joint, and interphlangeal joint) in the foot has seen significant advancements in the past decades. This article reviews the clinical indications, technical details, outcomes, and potential complications of small joint arthroscopies of the foot. PMID:25726488

  11. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  12. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  13. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  14. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 17 Commodity and Securities Exchanges 3 2012-04-01 2012-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  15. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  16. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 17 Commodity and Securities Exchanges 3 2013-04-01 2013-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  17. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 17 Commodity and Securities Exchanges 4 2014-04-01 2014-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  18. 49 CFR 213.351 - Rail joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Rail joints. 213.351 Section 213.351... Rail joints. (a) Each rail joint, insulated joint, and compromise joint shall be of a structurally sound design and dimensions for the rail on which it is applied. (b) If a joint bar is cracked,...

  19. 17 CFR 300.105 - Joint accounts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 17 Commodity and Securities Exchanges 3 2011-04-01 2011-04-01 false Joint accounts. 300.105... Customers of Sipc Members § 300.105 Joint accounts. (a) A joint account shall be deemed to be a “qualifying joint account” if it is owned jointly, whether by the owners thereof as joint tenants with the right...

  20. Optical rotary joint

    NASA Astrophysics Data System (ADS)

    May, R. G., Jr.

    1982-06-01

    The primary objective of this contract is the design, fabrication, and testing of an optical rotary joint which permits transmission of signals through optical fibers across the interface of two environments rotating relative to each other. Outstanding optical performance is achieved through the use of gradient index lenses to couple radiation across the separation between two fibers. The salient features of this device are bidirectional operation at two wavelengths (850 nm and 1300 nm), low insertion loss, low rotationally induced variation of attenuation, a seven-circuit electrical slip-ring assembly, and rugged construction. The device is designed to facilitate the application of future designs to pressurized, subsea environments.

  1. Bladder operated robotic joint

    NASA Technical Reports Server (NTRS)

    Robertson, Glen A. (Inventor)

    1993-01-01

    This invention is a robotic joint which is operated by inflatable bladders and which can be used in applications where it is desired to move or hold an object. A support block supports an elongated plate to which is pivotally attached a finger. A tension strip passes over a lever attached to the finger and is attached at its ends to the support block on opposite sides of the plate. Bladders positioned between the plate and the tension strip on opposite sides of the plate can be inflated by pumps to pivot the finger, with one of the bladders being inflated while the other is being deflated.

  2. Joint bone radiobiology workshop

    SciTech Connect

    Tomich, P.A.

    1991-01-01

    The Joint Bone Radiobiology Workshop was held on July 12--13, 1991 in Toronto, Canada. This document contains the papers presented at the meeting. The five sections were: Dose-effects, Endogenous Cofactors, Tumorigenesis, New Methods and Medical Implications. The papers covered risk assessment, tissue distribution of radionuclides, lifetime studies, biological half-lifes, the influence of age at time of exposure, tumor induction by different radionuclides, microscopic localization of radionuclides, and nuclear medicine issues including tissue distribution in the skeleton and bone marrow transplantation. (MHB)

  3. Joint hypermobility syndrome.

    PubMed

    Fikree, Asma; Aziz, Qasim; Grahame, Rodney

    2013-05-01

    Although perceived as a rare condition, joint hypermobility syndrome is common. Its prevalence in rheumatology clinics is extremely high. Early estimates suggest that it may be the most common of all rheumatologic conditions. The problem lies in the general lack of awareness of the syndrome, its means of recognition, and the resultant failure to diagnose it correctly when present. It is a worldwide problem. This article provides an overview of hypermobility and hypermobility syndrome, stressing its multisystemic nature and the negative impact that it may have on quality of life, with particular reference to gastrointestinal involvement. PMID:23597972

  4. Tarsometatarsal/Lisfranc joint.

    PubMed

    DiDomenico, Lawrence A; Cross, Davi

    2012-04-01

    Accurate early diagnosis with adequate reduction and maintenance of anatomic alignment of the dislocation or fracture within the Lisfranc joint complex have been found to be the key to successful outcomes regarding this injury. Because of the anatomic variations, the thin soft tissue envelop, and the abundance of ligamentous and capsular structures in the region, repair of these injuries can be a challenge. The classification systems used to describe these injuries aid in describing the mechanism of injury or displacement type present, which may aid in determining what treatment modality can provide the best outcome. PMID:22424486

  5. Posttraumatic temporomandibular joint disorders.

    PubMed

    Giannakopoulos, Helen E; Quinn, Peter D; Granquist, Eric; Chou, Joli C

    2009-05-01

    The temporomandibular joint (TMJ) has many essential functions. None of its components are exempt from injury. Facial asymmetry, malocclusion, disturbances in growth, osteoarthritis, and ankylosis can manifest as complications from trauma to the TMJ. The goals of initial treatment include achievement of pretraumatic function, restoration of facial symmetry, and resolution of pain. These same objectives hold true for late repairs and reconstruction of the TMJ apparatus. Treatment is demanding, and with opposing approaches. The following article explores various treatment options for problems presenting as a result of a history of trauma to the TMJ. PMID:22110802

  6. Joint-sparing Corrections in Malunited Lisfranc Joint Injuries.

    PubMed

    Nery, Caio; Raduan, Fernando; Baumfeld, Daniel

    2016-03-01

    Lisfranc fracture-dislocations are very serious and potentially disabling injuries. Unfortunately, they are often misdiagnosed. Multiplanar midfoot deformities that result from these fracture-dislocations are precursors of joint degeneration and significant functional disabilities. Anatomic reduction with different types of internal fixation is an efficient method to reconstruct midfoot alignment and stability. Joint-preserving reconstruction techniques emerge as a viable alternative to corrective fusion as they achieve stable joint realignment with preserved motion. PMID:26915786

  7. On representations for joint moments using a joint coordinate system.

    PubMed

    O'Reilly, Oliver M; Sena, Mark P; Feeley, Brian T; Lotz, Jeffrey C

    2013-11-01

    In studies of the biomechanics of joints, the representation of moments using the joint coordinate system has been discussed by several authors. The primary purpose of this technical brief is to emphasize that there are two distinct, albeit related, representations for moment vectors using the joint coordinate system. These distinct representations are illuminated by exploring connections between the Euler and dual Euler bases, the "nonorthogonal projections" presented in a recent paper by Desroches et al. (2010, "Expression of Joint Moment in the Joint Coordinate System," ASME J. Biomech. Eng., 132(11), p. 11450) and seminal works by Grood and Suntay (Grood and Suntay, 1983, "A Joint Coordinate System for the Clinical Description of Three-Dimensional Motions: Application to the Knee," ASME J. Biomech. Eng., 105(2), pp. 136-144) and Fujie et al. (1996, "Forces and Moment in Six-DOF at the Human Knee Joint: Mathematical Description for Control," Journal of Biomechanics, 29(12), pp. 1577-1585) on the knee joint. It is also shown how the representation using the dual Euler basis leads to straightforward definition of joint stiffnesses. PMID:24008987

  8. Joint collaborative technology experiment

    NASA Astrophysics Data System (ADS)

    Wills, Michael; Ciccimaro, Donny; Yee, See; Denewiler, Thomas; Stroumtsos, Nicholas; Messamore, John; Brown, Rodney; Skibba, Brian; Clapp, Daniel; Wit, Jeff; Shirts, Randy J.; Dion, Gary N.; Anselmo, Gary S.

    2009-05-01

    Use of unmanned systems is rapidly growing within the military and civilian sectors in a variety of roles including reconnaissance, surveillance, explosive ordinance disposal (EOD), and force-protection and perimeter security. As utilization of these systems grows at an ever increasing rate, the need for unmanned systems teaming and inter-system collaboration becomes apparent. Collaboration provides a means of enhancing individual system capabilities through relevant data exchange that contributes to cooperative behaviors between systems and enables new capabilities not possible if the systems operate independently. A collaborative networked approach to development holds the promise of adding mission capability while simultaneously reducing the workload of system operators. The Joint Collaborative Technology Experiment (JCTE) joins individual technology development efforts within the Air Force, Navy, and Army to demonstrate the potential benefits of interoperable multiple system collaboration in a force-protection application. JCTE participants are the Air Force Research Laboratory, Materials and Manufacturing Directorate, Airbase Technologies Division, Force Protection Branch (AFRL/RXQF); the Army Aviation and Missile Research, Development, and Engineering Center Software Engineering Directorate (AMRDEC SED); and the Space and Naval Warfare Systems Center - Pacific (SSC Pacific) Unmanned Systems Branch operating with funding provided by the Joint Ground Robotics Enterprise (JGRE). This paper will describe the efforts to date in system development by the three partner organizations, development of collaborative behaviors and experimentation in the force-protection application, results and lessons learned at a technical demonstration, simulation results, and a path forward for future work.

  9. Jointly Sponsored Research Program

    SciTech Connect

    Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

    2009-03-31

    U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

  10. [Fractures of the elbow joint].

    PubMed

    Nowak, T E; Dietz, S O; Burkhart, K J; Müller, L P; Rommens, P M

    2012-02-01

    Fractures around the elbow joint comprise fractures of the distal humerus, the radial head, the olecranon and the coronoid process. Combined lesions are particularly demanding for the surgeon. Accurate knowledge of the anatomy and of the biomechanics is an essential requirement for a specific diagnosis and therapy. A stable and painless movable elbow joint is essential for most of the activities of daily living. Risk factors for the development of posttraumatic elbow joint arthrosis are non-anatomically reconstructed joint surfaces, axial malalignment of the joint axis and untreated concomitant injuries. Modern angular stable and anatomically preshaped implants facilitate a biomechanically adequate osteosynthesis and avoid or decrease functional impairment. In consideration of an increasing number of osteoporotic elbow joint fractures, endoprosthetic replacement has gained significance. PMID:22271056

  11. Strength of Welded Aircraft Joints

    NASA Technical Reports Server (NTRS)

    Brueggeman, W C

    1937-01-01

    This investigation is a continuation of work started in 1928 and described in NACA-TR-348 which shows that the insertion of gusset plates was the most satisfactory way of strengthening a joint. Additional tests of the present series show that joints of this type could be improved by cutting out the portion of the plate between the intersecting tubes. T and lattice joints in thin-walled tubing 1 1/2 by 0.020 inch have somewhat lower strengths than joints in tubing of greater wall thickness because of failure by local buckling. In welding the thin-walled tubing, the recently developed "carburizing flux" process was found to be the only method capable of producing joints free from cracks. The "magnetic powder" inspection was used to detect cracks in the joints and flaws in the tubing.

  12. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, J.V.; Novak, R.F.; McBride, J.R.

    1991-08-27

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system. 11 figures.

  13. Metal to ceramic sealed joint

    DOEpatents

    Lasecki, John V.; Novak, Robert F.; McBride, James R.

    1991-01-01

    A metal to ceramic sealed joint which can withstand wide variations in temperature and maintain a good seal is provided for use in a device adapted to withstand thermal cycling from about 20 to about 1000 degrees C. The sealed joint includes a metal member, a ceramic member having an end portion, and an active metal braze forming a joint to seal the metal member to the ceramic member. The joint is positioned remote from the end portion of the ceramic member to avoid stresses at the ends or edges of the ceramic member. The sealed joint is particularly suited for use to form sealed metal to ceramic joints in a thermoelectric generator such as a sodium heat engine where a solid ceramic electrolyte is joined to metal parts in the system.

  14. Ball-joint grounding ring

    NASA Technical Reports Server (NTRS)

    Aperlo, P. J. A.; Buck, P. A.; Weldon, V. A.

    1981-01-01

    In ball and socket joint where electrical insulator such as polytetrafluoroethylene is used as line to minimize friction, good electrical contact across joint may be needed for lightning protection or to prevent static-charge build-up. Electrical contact is maintained by ring of spring-loaded fingers mounted in socket. It may be useful in industry for cranes, trailers, and other applications requiring ball and socket joint.

  15. Passive Ball Capture Joint

    NASA Technical Reports Server (NTRS)

    Cloyd, Richard A. (Inventor); Bryan, Thomas C. (Inventor)

    2003-01-01

    A passive ball capture joint has a sleeve with a plurality of bores distributed about a circumference thereof and formed therethrough at an acute angle relative to the sleeve's longitudinal axis. A spring-loaded retainer is slidingly fitted in each bore and is biased such that, if allowed, will extend at least partially into the sleeve to retain a ball therein. A ring, rotatably mounted about the bores, has an interior wall defining a plurality of shaped races that bear against the spring-loaded retainers. A mechanized rotational force producer is coupled to the ring. The ring can be rotated from a first position (that presses the retainers into the sleeve to lock the ball in place) to a second position (that allows the retainers to springback out of the sleeve to release the ball).

  16. Corynebacterium Prosthetic Joint Infection

    PubMed Central

    Cazanave, Charles; Greenwood-Quaintance, Kerryl E.; Hanssen, Arlen D.

    2012-01-01

    Identification of Corynebacterium species may be challenging. Corynebacterium species are occasional causes of prosthetic joint infection (PJI), but few data are available on the subject. Based on the literature, C. amycolatum, C. aurimucosum, C. jeikeium, and C. striatum are the most common Corynebacterium species that cause PJI. We designed a rapid PCR assay to detect the most common human Corynebacterium species, with a specific focus on PJI. A polyphosphate kinase gene identified using whole-genome sequence was targeted. The assay differentiates the antibiotic-resistant species C. jeikeium and C. urealyticum from other species in a single assay. The assay was applied to a collection of human Corynebacterium isolates from multiple clinical sources, and clinically relevant species were detected. The assay was then tested on Corynebacterium isolates specifically associated with PJI; all were detected. We also describe the first case of C. simulans PJI. PMID:22337986

  17. CRUCIFORM CONTROL ROD JOINT

    DOEpatents

    Thorp, A.G. II

    1962-08-01

    An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

  18. Inaudible temporomandibular joint vibrations.

    PubMed

    Widmalm, Sven E; Bae, Hanna E K; Djurdjanovic, Dragan; McKay, Duane C

    2006-07-01

    The aim was to test the hypothesis that inaudible vibrations with significant amounts of energy increasing during jaw movements can be recorded in the temporomandibular joint (TMJ) area. Twenty one subjects, who could perform wide opening movements without feeling discomfort, 12 with and 9 without TMJ sounds audible at conventional auscultation with a stethoscope, were included. Recordings were made during opening-closing, 2/s without tooth contact, and during mandibular rest, using accelerometers with a flat frequency response between the filter cutoff frequencies 0.1 Hz and 1000 Hz. The signals were digitized using a 24 bits card and sampled with the rate 96000 Hz. Power spectral analyses, and independent and paired samples t-tests were used in the analysis of the vibration power observed in frequency bands corresponding to audible and inaudible frequencies. An alpha-level of 5% was chosen for accepting a difference as being significant. In the group with audible sounds, about 47% of the total vibration energy was in the inaudible area below 20 Hz during opening-closing and about 76% during mandibular rest. In the group without audible sounds, the corresponding proportions were significantly different, 85% vs. 69%. The energy content of the vibrations, both those below and those above 20 Hz, increased significantly during jaw movement in both groups. Furthermore, percentage of signal energy above 20 Hz showed a noticeable increase in the group of subjects with audible sounds. This can physically be explained by decreased damping properties of damaged tissues surrounding the TMJ. Vibrations in the TMJ area can be observed with significant portions in the inaudible area below 20 Hz both during mandibular rest and during jaw movements whether or not the subjects have audible joint sounds. Further studies are needed to identify sources and evaluate possible diagnostic value. PMID:16933462

  19. Annuaire du Bureau des longitudes - 2006

    NASA Astrophysics Data System (ADS)

    Imcce; Bureau Des Longitudes

    2005-07-01

    This annual publication provides ephemerides and data to the use of professionnal and amateur astronomers. Divided in 11 chapters it covers concordance of various calendars, explanation of fondamental astronomy and various time scales, explanation for the use of ephemerides; tables provide ephemerides (positions, rise/set/passage) of the Sun and the Moon, planets, planetary satellites, asteroids, comets, bright stars; data and explanation for the physical observation of the surface of the Sun, the Moon, and planets; chart of the sky and a list of constellations and galaxies; prediction and ephemerides for astronomical phenomenon: occultation by the moon, stellar occultations by asteroids and appulses, solar eclipses and lunar eclipses; and an additional review about a hot scientific topic, this year: "Legendre et le méridien terrestre, 200 ans après". Cette publication annuelle fournit des éphémérides et des données à l'usage des astronomes professionnels et des astronomes amateurs. Composée de 11 chapitres elle comprend les rubriques sur les différents calendriers et leurs concordance, les fêtes légales en France, les dates et décrets sur les heures légales en France métropolitaine ; une introduction à l'astronomie fondamentale et aux différentes échelles de temps, des explications sur l'utilisation des éphémérides ; des tables fournissent les éphémérides (positions, heures de lever/coucher/passage) du Soleil et de la Lune, de planètes, de satellites naturels, d'astéroïdes, de comètes, d'étoiles brillantes ; des données pour l'observation de la surface du Soleil, de la Lune, et des planètes ; des cartes du ciel ainsi qu'une liste de constellations et de galaxies ; des prédictions des phénomènes astronomiques : occultation par la Lune, occultation stellaires par des astéroïdes et appulses, éclipses de Soleil et de la Lune; la liste et les coordonnées des observatoires astronomiques les plus connus ; et enfin un cahier th

  20. Bone and Joint Infections in Older Adults.

    PubMed

    Mears, Simon C; Edwards, Paul K

    2016-08-01

    Bone and joint infections in the elderly patient include septic native joints, osteomyelitis, and prosthetic joint infection. Infections are difficult to treat and require a team approach. Surgical debridement and intravenous antibiotics are the keys to treatment. Prosthetic joint infections often need a two-stage approach to treatment. First the infected joint is removed and the infection treated, then a second prosthetic joint is placed. Prosthetic joint infection is becoming the most common complication after joint replacement surgery. Outcomes of treatment of bone and joint infections are related to the severity of the infection and condition of the host. Because the elderly are often frail, treatment is challenging. PMID:27394023

  1. Robotic joint experiments under ultravacuum

    NASA Technical Reports Server (NTRS)

    Borrien, A.; Petitjean, L.

    1988-01-01

    First, various aspects of a robotic joint development program, including gearbox technology, electromechanical components, lubrication, and test results, are discussed. Secondly, a test prototype of the joint allowing simulation of robotic arm dynamic effects is presented. This prototype is tested under vacuum with different types of motors and sensors to characterize the functional parameters: angular position error, mechanical backlash, gearbox efficiency, and lifetime.

  2. Exercise and the Knee Joint.

    ERIC Educational Resources Information Center

    Clarke, H. Harrison, Ed.

    1976-01-01

    This report by the President's Council on Physical Fitness and Sports examines the effects of various forms of physical exercise on the knee joint which, because of its vulnerability, is especially subject to injury. Discussion centers around the physical characteristics of the joint, commonly used measurements for determining knee stability,…

  3. 20 CFR 410.645 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Joint hearings. 410.645 Section 410.645..., Finality of Decisions, and Representation of Parties § 410.645 Joint hearings. When two or more hearings... joint hearing, a joint hearing may not be held. Where joint hearings are held, a single record of...

  4. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  5. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2012-07-01 2012-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  6. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  7. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  8. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  9. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  10. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  11. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  12. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  13. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  14. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  15. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  16. 14 CFR 29.935 - Shafting joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Shafting joints. 29.935 Section 29.935... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 29.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation...

  17. 20 CFR 410.645 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Joint hearings. 410.645 Section 410.645..., Finality of Decisions, and Representation of Parties § 410.645 Joint hearings. When two or more hearings... joint hearing, a joint hearing may not be held. Where joint hearings are held, a single record of...

  18. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2011-07-01 2011-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  19. 14 CFR 27.935 - Shafting joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Shafting joints. 27.935 Section 27.935... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Rotor Drive System § 27.935 Shafting joints. Each universal joint, slip joint, and other shafting joints whose lubrication is necessary for operation must...

  20. 37 CFR 1.45 - Joint inventors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Joint inventors. 1.45 Section... Patent § 1.45 Joint inventors. (a) Joint inventors must apply for a patent jointly and each must make the... joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional...

  1. 7 CFR 97.14 - Joint applicants.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Joint applicants. 97.14 Section 97.14 Agriculture... PLANT VARIETY AND PROTECTION The Application § 97.14 Joint applicants. (a) Joint owners shall file a joint application by signing as joint applicants. (b) If an application for certificate is made by...

  2. Arthritis at the shoulder joint.

    PubMed

    Sankaye, Prashant; Ostlere, Simon

    2015-07-01

    The shoulder is a complex joint with numerous structures contributing to mobility and stability. Shoulder pain is a common clinical complaint that may be due to a wide spectrum of disorders including rotator cuff disease, instability, and arthropathy. Primary osteoarthritis of the shoulder joint is uncommon because it is a non-weight-bearing joint. Significant osteoarthritis of the glenohumeral joint is unusual in the absence of trauma, and the detection of advanced degenerative changes in patients without a known history of trauma should alert the clinician to search for other disorders. This article reviews the pathogenesis, clinical manifestations, and key imaging findings of the common categories of the arthritis affecting the glenohumeral joint. PMID:26021591

  3. Space Station alpha joint bearing

    NASA Technical Reports Server (NTRS)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  4. Shock transmissibility of threaded joints

    SciTech Connect

    Hansen, N.R.; Bateman, V.I.; Brown, F.A.

    1996-12-31

    Sandia National Laboratories (SNL) designs mechanical systems with threaded joints that must survive high shock environments. These mechanical systems include penetrators that must survive soil and rock penetration; drilling pipe strings that must survive rock-cutting, shock environments; and laydown weapons that must survive delivery impact shock. This paper summarizes an analytical study and an experimental evaluation of compressive, one-dimensional, shock transmission through a threaded joint in a split Hopkinson bar configuration. Thread geometries were scaled to simulate large diameter threaded joints with loadings parallel to the axis of the threads. Both strain and acceleration were evaluated with experimental measurements and analysis. Analytical results confirm the experimental conclusions that in this split Hopkinson bar configuration, the change in the one-dimensional shock wave by the threaded joint is localized to a length equal to a few diameters` length beyond the threaded joint.

  5. Method of forming a joint

    DOEpatents

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  6. Transport quantique dans des nanostructures

    NASA Astrophysics Data System (ADS)

    Naud, C.

    2002-09-01

    structure des oscillations de conductance en fonction du flux du champ magnétique de période h/e dont l'amplitude est beaucoup plus importante que celle mesurée sur un réseau carré de même dimension. Cette différence constitue une signature d'un effet de localisation induit par le champ magnétique sur la topologie mathcal{T}3. Pour des valeurs spécifiques du champ magnétique, du fait des interférences destructives Aharonov-Bohm, la propagation des fonctions d'ondes est limitée à un ensemble fini de cellule du réseau appelé cage. De la dépendance en température des oscillations de période h/e mesurées sur le réseau mathcal{T}3 nous avons tiré une longueur caractéristique qui peut être rattachée au périmètre des cages. Un phénomène inattendu fut l'observation, pour des champs magnétiques plus importants, d'un doublement de fréquence des oscillations. Ces oscillations de période h/2e pouvant avoir une amplitude supérieure aux oscillations de période h/e, une interprétation en terme d'harmonique n'est pas possible. Enfin, l'influence de la largeur électrique des fils constituant le réseau et donc celle du nombre de canaux par brin a été étudiée en réalisant des grilles électrostatique. Les variations de l'amplitude des signaux en h/e et h/2e en fonction de la tension de grille ont été mesurés.

  7. Joint services electronics program

    NASA Astrophysics Data System (ADS)

    Peters, Leon, Jr.

    1992-11-01

    The report represents the fifteenth annual summary of The Ohio State University Joint Services Electronics Program (JSEP). The transfer of the compact range identification technology initiated under JSEP support for time domain studies continues to make large advances. We are also assisting Rockwell (Tulsa) to update their RCS facilities. This work is on a subcontract to the ESL from the Air Force. This has lead to involvement in the study of Ultra Wide Band radar systems. The research activities devoted to the Generalized Ray and Gaussian Beams continues. Our JSEP research continues to be expanded by external funding. This program is being expanded by use of such funds which are more focussed on the requirements of the sponsors which includes both the Air Force and the Navy. Our JSEP research continues to focus on electromagnetic related topics. There are four major electromagnetics areas that were pursued in the past year. The Diffraction Studies Work Unit has initiated research on a time domain version of the Uniform Theory of Diffraction. A second topic under the Diffraction Studies Work Unit involves further extensions of the generalized resistive boundary condition and the generalized impedance boundary condition. These have been applied to scattering from a chiral slab. A third topic of interest is the diffraction from a corner. A fourth task involves the reflection/diffraction of a Gaussian beam. This represents an approach to replace the usual ray optics solution for very complex geometries where the versatile ray optics solution becomes cumbersome.

  8. Well pipe joint

    SciTech Connect

    Ortloff, D.J.; Landriault, L.S.

    1987-08-25

    For use in forming a pipe joint, a threaded tubular member adapted for connecting to another threaded member to form a threaded connection between the two members is described comprising a tubular body, a projecting helical rib on the body forming screw threads having load flanks shaped to have clearance between the flanks of the thread and the load flanks of the threads of the threaded member to which the member is adapted to be connected and a torque shoulder on the body to engage a torque shoulder on the other threaded member as the connection is being made up to limit the distance one of the members can enter the other for a given make-up torque. The threads are formed on the body so that selected threads away from the torque shoulder will have less clearance between them and the mating threads on the other member than do the threads on the member adjacent the torque shoulder and the mating threads on the other member when the torque shoulders engage so that the selected threads will engage the mating threads on the other member before the other threads adjacent the torque shoulder and the mating threads on the other member engage to cause the selected threads to be loaded initially to provide the initial force between the torque shoulders and to more uniformly load all of the threads when the connection is made-up and additional external loads are applied.

  9. Acromioclavicular joint cyst formation.

    PubMed

    Hiller, Andrew D; Miller, Joshua D; Zeller, John L

    2010-03-01

    Acromioclavicular joint (ACJ) cysts are an uncommon and unusual sequela associated with shoulder pathophysiology. The majority of literature on ACJ cysts consists of individual case reports with no definitive literature review currently available. In addition to a comprehensive literature review, four clinical cases are presented in this report. First described by Craig (1984), a total of 41 cases have been previously reported in the literature. Of these cases, five occurred with the rotator cuff musculature intact. The remaining 36 cases of ACJ cysts occurred in patients with a complete tear/avulsion of the rotator cuff. Previous attempts at compiling a complete record of all reported cases have combined several distinct conditions into a single category. This article presents two distinct etiologies for the pathogenesis of ACJ cyst formation. In the presence of an intact rotator cuff, a Type 1 cyst can form superficially and be limited to the ACJ. Following a massive or traumatic tear of the rotator cuff, mechanical instability of the humeral head can cause a deterioration of the inferior acromioclavicular capsule (cuff tear arthropathy) and an overproduction of synovial fluid. Overtime, a "geyser" of fluid can form between the glenohumeral and the ACJ, forming a Type 2 cyst. This differentiation and categorization is essential for appropriate classification and treatment. PMID:20069645

  10. Qualification of improved joint heaters

    NASA Technical Reports Server (NTRS)

    Cook, M.

    1989-01-01

    Qualification testing of the Redesigned Solid Rocket Motor improved igniter-to-case joint and field joint heaters was conducted on the fired TEM-04 static test motor and was completed on 7 Sep. 1989. The purpose of the test was to certify the installation and performance of the improved joint heaters for use on flight motors. The changes incorporated in the improved heaters improve durability and should reduce handling damage. The igniter-to-case joint and field joint primary heater circuits were subjected to five 20-hr ON cycles. The heater redundant circuits were then subjected to one 20-hr ON cycle. Voltage, current, and temperature set point values were maintained within the specified limits for both heaters during each ON cycle. When testing was complete, both heaters were removed and inspected. No discolorations or any other anomalies were found on either of the heaters. Based on the successful completion of this test, it is recommended that the improved igniter-to-case joint and field joint heaters be used on future flight motors.

  11. Common Bolted Joint Analysis Tool

    NASA Technical Reports Server (NTRS)

    Imtiaz, Kauser

    2011-01-01

    Common Bolted Joint Analysis Tool (comBAT) is an Excel/VB-based bolted joint analysis/optimization program that lays out a systematic foundation for an inexperienced or seasoned analyst to determine fastener size, material, and assembly torque for a given design. Analysts are able to perform numerous what-if scenarios within minutes to arrive at an optimal solution. The program evaluates input design parameters, performs joint assembly checks, and steps through numerous calculations to arrive at several key margins of safety for each member in a joint. It also checks for joint gapping, provides fatigue calculations, and generates joint diagrams for a visual reference. Optimum fastener size and material, as well as correct torque, can then be provided. Analysis methodology, equations, and guidelines are provided throughout the solution sequence so that this program does not become a "black box:" for the analyst. There are built-in databases that reduce the legwork required by the analyst. Each step is clearly identified and results are provided in number format, as well as color-coded spelled-out words to draw user attention. The three key features of the software are robust technical content, innovative and user friendly I/O, and a large database. The program addresses every aspect of bolted joint analysis and proves to be an instructional tool at the same time. It saves analysis time, has intelligent messaging features, and catches operator errors in real time.

  12. Sideline Management of Joint Dislocations.

    PubMed

    Schupp, Christian M; Rand, Scott E; Hanson, Travis W; Lee, Bryan M; Jafarnia, Korsh; Jia, Yuhang; Moseley, J Bruce; Seaberg, John P; Seelhoefer, Gregory M

    2016-01-01

    Athletes can sustain a large variety of injuries from simple soft tissue sprains to complex fractures and joint dislocations. This article reviews and provides the most recent information for sports medicine professionals on the management of simple and complex joint dislocations, i.e., irreducible and/or associated with a fracture, from the sidelines without the benefit of imaging. For each joint, the relevant anatomy, common mechanisms, sideline assessment, reduction techniques, initial treatment, and potential complications will be discussed, which allow for the safe and prompt return of athletes to the field of play. PMID:27172077

  13. Compliant Prosthetic Or Robotic Joint

    NASA Technical Reports Server (NTRS)

    Kerley, James J.; Eklund, Wayne D.

    1989-01-01

    Rotation partly free and partly restrained by resilience and damping. Joint includes U-shaped x- and y-axis frames joined by cables that cross in at center piece. The y-axis frame rotates about y-axis on roller bearing within predetermined angular range. The y-axis frame rotates slightly farther when arm strikes stop, because cables can twist. This mimics compliant resistance of knee joint reaching limit of its forward or backward motion. Used in prosthetic device to replace diseased or damage human joint, or in robot linkage to limit movement and cushion overloads.

  14. Characteristics of temporomandibular joint in patients with temporomandibular joint complaint

    PubMed Central

    Li, Yanfeng; Guo, Xiaoqian; Sun, Xiaoxue; Wang, Ning; Xie, Min; Zhang, Jianqiang; Lv, Yuan; Han, Weili; Hu, Min; Liu, Hongchen

    2015-01-01

    Introduction: This study was to investigate whether there was statistical difference between the bilateral temporomandibular joint (TMJ) in patients with unilateral TMJ pain or joint sounds, using cone beam computed tomography (CBCT). Methods: TMJ CBCT images of 123 cases were used to preliminarily determine the indicators suitable for the measuring method. TMJ CBCT image reconstruction was performed and 19 indicators were measured. Thirty-six cases without TMJ complaint served as controls. The comparison of bilateral TMJs was analyzed by paired t-test to find out the indicators without statistical significance. Twenty-nine patients with unilateral TMJ pain or joint sounds who underwent CBCT at the hospital were enrolled for the comparative study. The measured values were analyzed by paired t-test to determine the indicators with statistical difference. Results: In the control group, only radius value of bilateral TMJ was different statistically (P < 0.05). In the TMJ complaint group, the vertical 60° joint space of the bilateral TMJ was statistically different (P < 0.05) and the rest of the measured values showed no statistical difference. Conclusions: In the patients with unilateral TMJ pain or joint sounds, the vertical 60° joint space of the symptomatic side was significantly increased comparing with the asymptomatic side. PMID:26629112

  15. Campus/Industry Joint Ventures.

    ERIC Educational Resources Information Center

    McDonald, Eugene J.

    1985-01-01

    Opportunities for joint economic ventures of colleges and industry are discussed, and a variety of ventures undertaken by Duke University are outlined, including a health club, hotel, and office building. Tax and financing considerations are noted. (MSE)

  16. Joint probabilities and quantum cognition

    SciTech Connect

    Acacio de Barros, J.

    2012-12-18

    In this paper we discuss the existence of joint probability distributions for quantumlike response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

  17. Joint probabilities and quantum cognition

    NASA Astrophysics Data System (ADS)

    de Barros, J. Acacio

    2012-12-01

    In this paper we discuss the existence of joint probability distributions for quantumlike response computations in the brain. We do so by focusing on a contextual neural-oscillator model shown to reproduce the main features of behavioral stimulus-response theory. We then exhibit a simple example of contextual random variables not having a joint probability distribution, and describe how such variables can be obtained from neural oscillators, but not from a quantum observable algebra.

  18. Pyrothermal treatment of welded joints

    SciTech Connect

    Serikov, S.V.; Idiyatullin, R.S.; Myakushkin, S.N.; Yaufman, V.V.

    1992-03-01

    The results of investigation of the structure and distribution of residual stresses in welded joints in pipes after heat treatment, which includes heating of the surface being treated due to combustion of plates formed from a thermite-type material of pyrotechnic composition, placed around the perimeter of the welded joint, and also an assessment of the level of residual stresses prior to and after pyrotechnic treatment demonstrated the promising nature of the proposed method. 5 refs., 5 figs.

  19. Etude des effets du martelage repetitif sur les contraintes residuelles

    NASA Astrophysics Data System (ADS)

    Hacini, Lyes

    L'assemblage par soudage peut engendrer des contraintes residuelles. Ces contraintes provoquent des fissurations prematurees et un raccourcissement de la duree de vie des composants. Dans ce contexte, le martelage robotise est utilise pour relaxer ces contraintes residuelles. Trois volets sont presentes: le premier est l'evaluation des effets des impacts unitaires repetes sur le champ de contraintes developpe dans des plaques d'acier inoxydable austenitique 304L vierges ou contenant des contraintes residuelles initiales. Dans la deuxieme partie de ce projet, le martelage est applique grace au robot SCOMPI. Les contraintes residuelles induites et relaxees par martelage sont ensuite mesurees par la methode des contours, qui a ete adaptee a cet effet. Dans la troisieme partie, le martelage est modelise par la methode des elements finis. Un modele axisymetrique developpe grace au logiciel ANSYS permet de simuler des impacts repetes d'un marteau elastique sur une plaque ayant un comportement elastoplastique.

  20. Simplified procedures for designing composite bolted joints

    NASA Technical Reports Server (NTRS)

    Chamis, Christos C.

    1988-01-01

    Simplified procedures are described to design and analyze single and multi-bolt composite joints. Numerical examples illustrate the use of these methods. Factors affecting composite bolted joints are summarized. References are cited where more detailed discussion is presented on specific aspects of composite bolted joints. Design variables associated with these joints are summarized in the appendix.

  1. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  2. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  3. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Joint hearings. 422.1040 Section 422.1040 Public...) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Appeal procedures for Civil Money Penalties § 422.1040 Joint... conference or hearing and conduct all proceedings jointly. If joint hearings are held, a single record of...

  4. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 3 2013-07-01 2013-07-01 false Joint tortfeasors. 536.54 Section 536.54... AGAINST THE UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  5. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 3 2012-07-01 2009-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  6. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  7. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 3 2011-07-01 2009-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  8. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  9. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Joint hearings. 422.1040 Section 422.1040 Public...) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Appeal procedures for Civil Money Penalties § 422.1040 Joint... conference or hearing and conduct all proceedings jointly. If joint hearings are held, a single record of...

  10. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  11. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 3 2012-10-01 2012-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  12. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 3 2014-07-01 2014-07-01 false Joint tortfeasors. 536.54 Section 536.54... AGAINST THE UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  13. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  14. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  15. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  16. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  17. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  18. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  19. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rail joints. 234.233 Section 234.233..., Inspection, and Testing Maintenance Standards § 234.233 Rail joints. Each non-insulated rail joint located... than joint bars and the bonds shall be maintained in such condition to ensure electrical conductivity....

  20. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  1. 14 CFR 23.693 - Joints.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Joints. 23.693 Section 23.693 Aeronautics... Systems § 23.693 Joints. Control system joints (in push-pull systems) that are subject to angular motion... factor may be reduced to 2.0 for joints in cable control systems. For ball or roller bearings,...

  2. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  3. 42 CFR 423.1040 - Joint hearings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Joint hearings. 423.1040 Section 423.1040 Public... § 423.1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  4. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  5. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  6. 12 CFR 347.107 - Joint ventures.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Joint ventures. 347.107 Section 347.107 Banks... INTERNATIONAL BANKING § 347.107 Joint ventures. (a) Joint ventures. If a bank, directly or indirectly, acquires or holds an equity interest in a foreign organization that is a joint venture, and the bank or...

  7. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Rail joints. 234.233 Section 234.233..., Inspection, and Testing Maintenance Standards § 234.233 Rail joints. Each non-insulated rail joint located... than joint bars and the bonds shall be maintained in such condition to ensure electrical conductivity....

  8. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  9. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  10. 21 CFR 26.73 - Joint Committee.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Joint Committee. 26.73 Section 26.73 Food and...Frameworkâ Provisions § 26.73 Joint Committee. (a) A Joint Committee consisting of representatives of the United States and the European Community (EC) will be established. The Joint Committee shall...

  11. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  12. 47 CFR 76.912 - Joint certification.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Joint certification. 76.912 Section 76.912... CABLE TELEVISION SERVICE Cable Rate Regulation § 76.912 Joint certification. (a) Franchising authorities may apply for joint certification and may engage in joint regulation, including, but not limited...

  13. 32 CFR 536.54 - Joint tortfeasors.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Joint tortfeasors. 536.54 Section 536.54 National... UNITED STATES Investigation and Processing of Claims § 536.54 Joint tortfeasors. When joint tortfeasors... United States rather than pay the claim in full and then bring suit against the joint tortfeasor...

  14. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 3 2014-10-01 2014-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  15. 42 CFR 423.1040 - Joint hearings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 3 2011-10-01 2011-10-01 false Joint hearings. 423.1040 Section 423.1040 Public... § 423.1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  16. 42 CFR 422.1040 - Joint hearings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 3 2013-10-01 2013-10-01 false Joint hearings. 422.1040 Section 422.1040 Public....1040 Joint hearings. When two or more affected parties have requested hearings and the same or... the prehearing conference or hearing and conduct all proceedings jointly. If joint hearings are...

  17. 49 CFR 234.233 - Rail joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Rail joints. 234.233 Section 234.233... joints. Each non-insulated rail joint located within the limits of a highway-rail grade crossing train detection circuit shall be bonded by means other than joint bars and the bonds shall be maintained in...

  18. Condylar hyperplasia following unilateral temporomandibular joint replacement.

    PubMed

    Machon, V; Levorova, J; Hirjak, D; Foltan, R

    2015-06-01

    Total joint replacement of the temporomandibular joint (TJR) can be associated with intraoperative and postoperative complications. We report herein the occurrence of a postoperative open bite malocclusion, the result of condylar hyperplasia affecting the non-operated joint at 1 year after unilateral total joint replacement. PMID:25662429

  19. Management of acromioclavicular joint injuries.

    PubMed

    Li, Xinning; Ma, Richard; Bedi, Asheesh; Dines, David M; Altchek, David W; Dines, Joshua S

    2014-01-01

    Acromioclavicular joint injuries are among the most common shoulder girdle injuries in athletes and most commonly result from a direct force to the acromion with the arm in an adducted position. Acromioclavicular joint injuries often present with associated injuries to the glenohumeral joint, including an increased incidence of superior labrum anterior posterior (SLAP) tears that may warrant further evaluation and treatment. Anteroposterior stability of the acromioclavicular joint is conferred by the capsule and acromioclavicular ligaments, of which the posterior and superior ligaments are the strongest. Superior-inferior stability is maintained by the coracoclavicular (conoid and trapezoid) ligaments. Type-I or type-II acromioclavicular joint injuries have been treated with sling immobilization, early shoulder motion, and physical therapy, with favorable outcomes. Return to activity can occur when normal shoulder motion and strength are obtained and the shoulder is asymptomatic as compared with the contralateral normal extremity. The management of type-III injuries remains controversial and is individualized. While a return to the previous level of functional activity with nonsurgical treatment has been documented in a number of case series, surgical reduction and coracoclavicular ligament reconstruction has been associated with a favorable outcome and can be considered in patients who place high functional demands on their shoulders or in athletes who participate in overhead sports. Surgical management is indicated for high-grade (≥type IV) acromioclavicular joint injuries to achieve anatomic reduction of the acromioclavicular joint, reconstruction of the coracoclavicular ligaments, and repair of the deltotrapezial fascia. Outcomes after surgical reconstruction of the coracoclavicular ligaments have been satisfactory with regard to achieving pain relief and return to functional activities, but further improvements in the biomechanical strength of these

  20. Migrating bone shards in dissecting Charcot joints.

    PubMed

    Forrester, D M; Magre, G

    1978-06-01

    Extensive periarticular calcification is characteristic of Charcot joints. Fragmentation of the articular margins of bone contributes to the bony detritus, but the majority forms de novo in the joint capsule. Occasionally the calcific debris is seen far removed from the joint. Dissection of a chronically distended joint along muscle planes is most commonly associated with the inflammatory joint disease of rheumatoid arthritis. Its occurrence in Charcot joints is documented by arthrography, which demonstrates continuity of the joint space and the distant calcifications. PMID:418652

  1. Disorders of the distal radioulnar joint.

    PubMed

    Houdek, Matthew T; Wagner, Eric R; Moran, Steven L; Berger, Richard A

    2015-01-01

    The distal radioulnar joint is responsible for stable forearm rotation. Injury to this joint can occur following a variety of mechanisms, including wrist fractures, ligamentous damage, or degenerative wear. Accurate diagnosis requires a clear understanding of the anatomy and mechanics of the ulnar aspect of the wrist. Injuries can be divided into three major categories for diagnostic purposes, and these include pain without joint instability, pain with joint instability, and joint arthritis. New advancements in imaging and surgical technique can allow for earlier detection of injuries, potentially preserving joint function. In this article, the authors review the pertinent anatomy, biomechanics, and major abnormality involving the distal radioulnar joint. PMID:25285686

  2. Strength evaluation of socket joints

    NASA Technical Reports Server (NTRS)

    Rash, Larry C.

    1994-01-01

    This report documents the development of a set of equations that can be used to provide a relatively simple solution for identifying the strength of socket joints and for most cases avoid the need of more lengthy analyses. The analytical approach was verified by comparison of the contact load distributions to results obtained from a finite element analysis. The contacting surfaces for the specific joint in this analysis are in the shape of frustrums of a cone and are representative of the tapered surfaces in the socket-type joints used to join segments of model support systems for wind tunnels. The results are in the form of equations that can be used to determine the contact loads and stresses in the joint from the given geometry and externally applied loads. Equations were determined to define the bending moments and stresses along the length of the joints based on strength and materials principles. The results have also been programmed for a personal computer and a copy of the program is included.

  3. Peste des Petits Ruminants Virus.

    PubMed

    Baron, M D; Diallo, A; Lancelot, R; Libeau, G

    2016-01-01

    Peste des petits ruminants virus (PPRV) causes a severe contagious disease of sheep and goats and has spread extensively through the developing world. Because of its disproportionately large impact on the livelihoods of low-income livestock keepers, and the availability of effective vaccines and good diagnostics, the virus is being targeted for global control and eventual eradication. In this review we examine the origin of the virus and its current distribution, and the factors that have led international organizations to conclude that it is eradicable. We also review recent progress in the molecular and cellular biology of the virus and consider areas where further research is required to support the efforts being made by national, regional, and international bodies to tackle this growing threat. PMID:27112279

  4. An analysis of a joint shear model for jointed media with orthogonal joint sets; Yucca Mountain Site Characterization Project

    SciTech Connect

    Koteras, J.R.

    1991-10-01

    This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs.

  5. The enhancement of existing DES Maplet interface

    NASA Astrophysics Data System (ADS)

    Abdullah, Nur Lina; Mutalip, Rasidah Abdull; Abdullah, Kamilah

    2014-07-01

    This study pertains to the process of Data Encryption Standard, DES. DES consists of encryption and decryption processes linked with mathematical elements such as algebra and number theory. Preliminary, studies revealed that most of mathematics students face a problem in understanding the complicated process of DES. In modern learning methods, learning environment becomes more interesting with the use of computer and a variety of mathematical software packages. Several mathematical softwares such as Maple, Mathematica, Mathlab and Sage were developed in order to fulfill the specific calculation requirements. Correspondingly, motivated from that, this study incorporated with Maple to enhance the existing DES Maplet interface to be more interactive and user-friendly compared to the original version.

  6. Denervation of the wrist joint.

    PubMed

    Buck-Gramcko, D

    1977-01-01

    A collective review was made of the results of denervation of the wrist joint for painful restrictiorn of motion done in 313 patients and follow-up studies on 195 (average 4.1 years, ranging from 9 months to 14 years). Complete denervation was done in only 30, partial denervation in the others being done after testing with local anesthetic blocks. Sixty-nine of the patients retained a moble wrist without pain or with slight pain with heavy work. No evidence of Charcot-like joints was seen. Poorest results followed when the operation was done for sequelae of intra-articular fracture of the radius, fracture dislocations, unstable ligamentous support, joint surface destruction, or for those required to do heavy manual labor. Arthrodesis was done secondarily in nine patients. PMID:839055

  7. Rheumatoid arthritis affecting temporomandibular joint

    PubMed Central

    Sodhi, Amandeep; Naik, Shobha; Pai, Anuradha; Anuradha, Ardra

    2015-01-01

    Rheumatoid arthritis (RA) is a chronic, systemic, autoimmune inflammatory disorder that is characterized by joint inflammation, erosive properties and symmetric multiple joint involvement. Temporomandibular joint (TMJ) is very rare to be affected in the early phase of the disease, thus posing diagnostic challenges for the dentist. Conventional radiographs fail to show the early lesions due to its limitations. More recently cone-beam computed tomography (CBCT) has been found to diagnose the early degenerative changes of TMJ and hence aid in the diagnosis of the lesions more accurately. Our case highlights the involvement of TMJ in RA and the role of advanced imaging (CBCT) in diagnosing the bony changes in the early phase of the disease. PMID:25684928

  8. Copernic: la piste des influences arabes

    NASA Astrophysics Data System (ADS)

    Khalatbari, A.; Bonnet-Bidaud, J. M.

    2004-10-01

    Copernic a-t-il connu le travail des astronomes du Moyen-Orient ? S'en est-il inspiré pour élaborer sa théorie de l'héliocentrisme ? C'est l'hypothèse avancée par certains historiens des sciences pour comprendre le génie de celui qui, le premier, a placé le Soleil au centre du monde. Enquête.

  9. Solder Joint Health Monitoring Testbed

    NASA Technical Reports Server (NTRS)

    Delaney, Michael M.; Flynn, James G.; Browder, Mark E.

    2009-01-01

    A method of monitoring the health of selected solder joints, called SJ-BIST, has been developed by Ridgetop Group Inc. under a Small Business Innovative Research (SBIR) contract. The primary goal of this research program is to test and validate this method in a flight environment using realistically seeded faults in selected solder joints. An additional objective is to gather environmental data for future development of physics-based and data-driven prognostics algorithms. A test board is being designed using a Xilinx FPGA. These boards will be tested both in flight and on the ground using a shaker table and an altitude chamber.

  10. Rothia prosthetic knee joint infection.

    PubMed

    Trivedi, Manish N; Malhotra, Prashant

    2015-08-01

    Rothia species - Gram-positive pleomorphic bacteria that are part of the normal oral and respiratory flora - are commonly associated with dental cavities and periodontal disease although systemic infections have been described. We describe a 53-year-old female with rheumatoid arthritis complicated by prosthetic knee joint infection due to Rothia species, which was successfully treated by surgical removal of prosthesis and prolonged antimicrobial therapy. The issue of antibiotic prophylaxis before dental procedures among patients with prosthetic joint replacements is discussed. PMID:23357608

  11. [Divorce and joint physical custody].

    PubMed

    Golse, B

    2014-04-01

    This work first recalls the definition of joint physical custody, as well as the current legal procedure for obtaining it, its practical implementation, the financial implications for parents, and finally some statistics. Some psychological and psychopathological reflections on the impact of divorce on children are then presented before considering the question of joint physically custody with regard to attachment theory and depending on the age of the child (a great caution seems to be required before three years). The article concludes with a brief discussion of parental alienation syndrome. PMID:24630624

  12. [Pathobiochemistry of joint destruction in inflammatory and degenerative joint diseases].

    PubMed

    Greiling, H; Kleesiek, K; Reinards, R

    1987-08-01

    While the biochemical mechanism which leads to the destruction of joints in the course of degenerative and inflammatory arthropathies has not been cleared up completely to this day, basic differences have been noted in the way the two types of arthropathy affect the articular cartilage. The differences are described from the viewpoint of pathobiochemistry as they are fundamental to causal therapy. PMID:3314203

  13. Ulnar-sided wrist pain. II. Clinical imaging and treatment

    PubMed Central

    Watanabe, Atsuya; Souza, Felipe; Vezeridis, Peter S.; Blazar, Philip

    2009-01-01

    Pain at the ulnar aspect of the wrist is a diagnostic challenge for hand surgeons and radiologists due to the small and complex anatomical structures involved. In this article, imaging modalities including radiography, arthrography, ultrasound (US), computed tomography (CT), CT arthrography, magnetic resonance (MR) imaging, and MR arthrography are compared with regard to differential diagnosis. Clinical imaging findings are reviewed for a more comprehensive understanding of this disorder. Treatments for the common diseases that cause the ulnar-sided wrist pain including extensor carpi ulnaris (ECU) tendonitis, flexor carpi ulnaris (FCU) tendonitis, pisotriquetral arthritis, triangular fibrocartilage complex (TFCC) lesions, ulnar impaction, lunotriquetral (LT) instability, and distal radioulnar joint (DRUJ) instability are reviewed. PMID:20012039

  14. [Early radiological diagnostics for scapholunate dissociation (SLD)].

    PubMed

    Schmitt, R; Fröhner, S; Fodor, S; Christopoulos, G; Kalb, K H

    2006-08-01

    The partial tear of the scapholunate ligament (pre-dynamic stage of SLD) as well as the complete tear (dynamic stage) does not lead to carpal malalignment. However, if the completely ruptured ligament is accompanied by lesions of the extrinsic ligaments, both the scaphoid and the lunate are malaligned already at rest (static stage of SLD). Later, osteoarthritis will develop, beginning in the radioscaphoid compartment, progressing to the midcarpal joint, and ending in a carpal collapse (osteoarthrotic stage of SLD). Dynamic SLD is detectable only in stress views and in cinematography. The high utility of MRI for directly visualizing the injured ligament is emphasized: reparation tissue is focally enhanced at the rupture site by intravenously applied contrast agent; the individual segments of the scapholunate ligament can be visualized in direct MR arthrography, therefore allowing differentiation of partial and complete ligamentous tears. PMID:16874503

  15. FRF based joint dynamics modeling and identification

    NASA Astrophysics Data System (ADS)

    Mehrpouya, Majid; Graham, Eldon; Park, Simon S.

    2013-08-01

    Complex structures, such as machine tools, are comprised of several substructures connected to each other through joints to form the assembled structures. Joints can have significant contributions on the behavior of the overall assembly and ignoring joint effects in the design stage may result in considerable deviations from the actual dynamic behavior. The identification of joint dynamics enables us to accurately predict overall assembled dynamics by mathematically combining substructure dynamics through the equilibrium and compatibility conditions at the joint. The essence of joint identification is the determination of the difference between the measured overall dynamics and the rigidly coupled substructure dynamics. In this study, we investigate the inverse receptance coupling (IRC) method and the point-mass joint model, which considers the joint as lumped mass, damping and stiffness elements. The dynamic properties of the joint are investigated using both methods through a finite element (FE) simulation and experimental tests. `100

  16. Diffusion des Metaux et Evolution Stellaire

    NASA Astrophysics Data System (ADS)

    Turcotte, Sylvain

    Nous presentons dans cette these des modeles d'evolution stellaire incorporant la diffusion microscopique de maniere consistante. Pour la premiere fois, on a calcule l'evolution d'etoiles en tenant compte en detail de l'impact des variations d'abondances sur leur structure. Nous utilisons des spectres monochromatiques pour chacun des elements les plus abondants dans un melange solaire pour recalculer l'opacite pour les abondances et les conditions locales dans l'interieur d'une etoile au cours de son evolution. Nos modeles montrent que la diffusion atomique des metaux a un effet important sur les opacites dan les etoiles de plus de 1.3Msolar ou l'abondance du fer et des autres elements du pic du fer varient substantiellement. Ces etoiles, sans rotation ou champ magnetique, sont proches des etoiles de type Fm-Am dans lesquelles on observe une legere surabondance d'elements du pic du fer en plus d'une sous-abondance de calcium, sous-abondance que l'on obtient egalement. Nous obtenons cependant des surabondances depassant un facteur 10 pour les etoiles de plus de 1.4Msolar ce qui suggere qu'il existe un ou plusieurs mecanismes limitant la diffusion microscopique. La surabondance du fer en surface cause une augmentation, qui peut atteindre un facteur sept, de l'opacite a la limite de la zone convective. Ceci cause un accroissement de la temperature effective et de la masse de la zone convective comparativement aux modeles n'incluant que la diffusion de l'helium. Il s'agit la du principal effet de la diffusion sur la structure interne de ces etoiles. La diffusions n'a pas d'influence sur l'evolution de coeur stellaire dans les etoiles significativement plus massives quie le Soleil. Nous avons verife que l'utilisation de modeles consistants avec diffusion n'apporte pas d'amelioration sensible aux modeles solaires. Les forces radiatives calculees a partir des spectres d'OPAL pour les elements du pic du fer representent une fraction importante de la gravite. On obtient des

  17. The Joint Accomplishment of Identity

    ERIC Educational Resources Information Center

    Hand, Victoria; Gresalfi, Melissa

    2015-01-01

    Identity has become a central concept in the analysis of learning from social perspectives. In this article, we draw on a situative perspective to conceptualize identity as a "joint accomplishment" between individuals and their interactions with norms, practices, cultural tools, relationships, and institutional and cultural contexts.…

  18. An Introduction to Joint Control

    ERIC Educational Resources Information Center

    Lowenkron, Barry

    2006-01-01

    Lowenkron and colleagues (Lowenkron, 1984; 1991; 1998; 2006; Lowenkron and Colvin, 1992) describe a model that explains complex behavior using only well-established behavioral principles, concepts and terms. The model, called "joint control," is especially useful for understanding complex and delayed discriminations within a purely behavioral…

  19. Stress-relieved solder joints

    NASA Technical Reports Server (NTRS)

    Zemenick, C. J.

    1980-01-01

    Mechanical stress on solder joints is reduced by procedure for soldering electronic components to circuit boards. Procedure was developed for radio-frequency (RF) strip-line circuits, for which dimensions must be carefully controlled to minimize parasitic capacitance and inductance. Procedure consists of loosening component from its mounting after each lead is soldered relieving induced stresses before next soldering step.

  20. The Rationale for Joint Mobilization.

    ERIC Educational Resources Information Center

    Burkhardt, Sandy

    This paper presents an overview of the functions of connective tissue and the mechanisms of joint injury and contracture formation in relation to therapeutic exercise. The components of connective tissue operation are explained, including fibroblasts, macrophages, plasma cells, and collagen. An examination of the histology of connective tissue as…

  1. Knee joint replacement prosthesis (image)

    MedlinePlus

    A prosthesis is a device designed to replace a missing part of the body, or to make a part of the body work better. The metal prosthetic device in knee joint replacement surgery replaces cartilage and bone which is damaged from disease or aging.

  2. Joint BioEnergy Institute

    SciTech Connect

    Keasling, Jay; Simmons, Blake; Tartaglino, Virginia; Baidoo, Edward; Kothari, Ankita

    2015-06-15

    The Joint BioEnergy Institute (JBEI) is a U.S. Department of Energy (DOE) Bioenergy Research Center dedicated to developing advanced biofuels—liquid fuels derived from the solar energy stored in plant biomass that can replace gasoline, diesel and jet fuels.

  3. Threaded joint design for composites

    SciTech Connect

    Hahn, H.T.; Kallas, M.N. . Composites Mfg. Technology Center)

    1989-06-01

    This report summarizes work on the design of a composite threaded joint. Although the project was for a year, it was placed on hold about half way through the program at the stage of model refinement. Thus, the report provides only partial results on the design of a threaded joint. Composite joining is one of the major obstacles preventing composites from side usage. The difficulties in joining composite structures arise from factors associated with the anisotropic nature of these materials which are strong and stiff in the fiber direction and very weak in the transverse direction. One well known type of joints is the threaded joint which is used extensively in metallic structures. Among the common thread types is the buttress thread which has advantages when loading is in one direction only. The flank of the thread which almost takes all the thrust is referred to as the pressure flank. It is nearly perpendicular to the thread axis so that the radial component of the thrust is almost zero. Therefore, this form of thread is particularly applicable where tubular members are screwed together as in the case of breech mechanisms of large guns and airplane propeller hubs. In this report, we use a buttress type thread in a composite laminate. The following sections will define the problem and describe the finite element model proposed to solve the problem. Some preliminary results are also included in the report.

  4. Cryopumping Field Joint Can Testing

    NASA Technical Reports Server (NTRS)

    Johnson, Wesley L.; Fesmire, James E.; Meneghelli, Barry E.

    2011-01-01

    For long installations, vacuum jacketed piping often comes in 40 foot sections that are butt welded together in the field. A short can is then welded over the bare pipe connection to allow for insulation to be protected from the environment. Traditionally, the field joint is insulated with multilayer insulation and a vacuum is pulled on the can to minimize heat leak through the bare section and prevent frost from forming on the pipe section. The vacuum jacketed lines for the Ares I mobile launch platform were to be a combined 2000 feet long, with 60+ pipe sections and field joint cans. Historically, Kennedy Space Center has drilled a hole in the long sections to create a common vacuum with the field joint can to minimize maintenance on the vacuum jacketed piping. However, this effort looked at ways to use a passive system that didn't require a vacuum, but may cryopump to create its own vacuum. Various forms of aerogel, multilayer insulations, and combinations thereof were tested to determine the best method of insulating the field joint while minimizing maintenance and thermal losses.

  5. Shear-Joint Capability Versus Bolt Clearance

    NASA Technical Reports Server (NTRS)

    Lee, H. M.

    1994-01-01

    NASA Technical Memorandum presents theoretical study of relationships between load-bearing capabilities of shear joints that comprise plates clamped together by multiple bolts and clearances between bolts and boltholes in those joints.

  6. Aging changes in the bones - muscles - joints

    MedlinePlus

    ... the skin and hair are also common. The skeleton provides support and structure to the body. Joints ... areas where bones come together. They allow the skeleton to be flexible for movement. In a joint, ...

  7. Arthritis Mechanisms May Vary by Joint

    MedlinePlus

    ... Molecular differences between knee and hip joints with rheumatoid arthritis may inform more personal treatment strategies. Sebastian Kaulitzki/Hemera/Thinkstock Knee and hip joints with rheumatoid arthritis have differing genetic markers linked to inflammation, suggesting ...

  8. Osteoarthritis Basics: The Joint and Its Parts

    MedlinePlus

    ... on. Feature: Osteoarthritis Osteoarthritis Basics: The Joint and Its Parts Past Issues / Winter 2013 Table of Contents ... type of arthritis. More common in older people, it is sometimes called degenerative joint disease. Osteoarthritis most ...

  9. Seismic response of rock joints and jointed rock mass

    SciTech Connect

    Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

    1996-06-01

    Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs.

  10. Joint laxity in the performing arts.

    PubMed

    Bird, H

    2016-01-01

    Traditional scoring systems for the assessment of joint flexibility are reviewed and reasons for variation in joint laxity are defined. The value of controlled joint laxity in the hands and arms of musicians is then discussed as well as the desirability of adjusting laxity at the various joints used in the different styles of dance, some of them ethnic, that depend on the specific articular characteristics of each different dancer. PMID:27245523