Science.gov

Sample records for lanthanum fluorides

  1. DISSOLUTION OF LANTHANUM FLUORIDE PRECIPITATES

    DOEpatents

    Fries, B.A.

    1959-11-10

    A plutonium separatory ore concentration procedure involving the use of a fluoride type of carrier is presented. An improvement is given in the derivation step in the process for plutonium recovery by carrier precipitation of plutonium values from solution with a lanthanum fluoride carrier precipitate and subsequent derivation from the resulting plutonium bearing carrier precipitate of an aqueous acidic plutonium-containing solution. The carrier precipitate is contacted with a concentrated aqueous solution of potassium carbonate to effect dissolution therein of at least a part of the precipitate, including the plutonium values. Any remaining precipitate is separated from the resulting solution and dissolves in an aqueous solution containing at least 20% by weight of potassium carbonate. The reacting solutions are combined, and an alkali metal hydroxide added to a concentration of at least 2N to precipitate lanthanum hydroxide concomitantly carrying plutonium values.

  2. METHOD FOR DISSOLVING LANTHANUM FLUORIDE CARRIER FOR PLUTONIUM

    DOEpatents

    Koshland, D.E. Jr.; Willard, J.E.

    1961-08-01

    A method is described for dissolving lanthanum fluoride precipitates which is applicable to lanthanum fluoride carrier precipitation processes for recovery of plutonium values from aqueous solutions. The lanthanum fluoride precipitate is contacted with an aqueous acidic solution containing dissolved zirconium in the tetravalent oxidation state. The presence of the zirconium increases the lanthanum fluoride dissolved and makes any tetravalent plutonium present more readily oxidizable to the hexavalent state. (AEC)

  3. Lanthanum fluoride nanoparticles for radiosensitization of tumors

    NASA Astrophysics Data System (ADS)

    Kudinov, Konstantin; Bekah, Devesh; Cooper, Daniel; Shastry, Sathvik; Hill, Colin; Bradforth, Stephen; Nadeau, Jay

    2016-03-01

    Dense inorganic nanoparticles have recently been identified as promising radiosensitizers. In addition to dose enhancement through increased attenuation of ionizing radiation relative to biological tissue, scintillating nanoparticles can transfer energy to coupled photosensitizers to amplify production of reactive oxygen species, as well as provide UVvisible emission for optical imaging. Lanthanum fluoride is a transparent material that is easily prepared as nanocrystals, and which can provide radioluminescence at a number of wavelengths through simple substitution of lanthanum ions with other luminescent lanthanides. We have prepared lanthanum fluoride nanoparticles doped with cerium, terbium, or both, that have good spectral overlap with chlorine6 or Rose Bengal photosensitizer molecules. We have also developed a strategy for stable conjugation of the photosensitizers to the nanoparticle surface, allowing for high energy transfer efficiencies on a per molecule basis. Additionally, we have succeeded in making our conjugates colloidally stable under physiological conditions. Here we present our latest results, using nanoparticles and nanoparticle-photosensitizer conjugates to demonstrate radiation dose enhancement in B16 melanoma cells. The effects of nanoparticle treatment prior to 250 kVp x-ray irradiation were investigated through clonogenic survival assays and cell cycle analysis. Using a custom apparatus, we have also observed scintillation of the nanoparticles and conjugates under the same conditions that the cell samples are irradiated.

  4. Fluoride removal in water by a hybrid adsorbent lanthanum-carbon.

    PubMed

    Vences-Alvarez, Esmeralda; Velazquez-Jimenez, Litza Halla; Chazaro-Ruiz, Luis Felipe; Diaz-Flores, Paola E; Rangel-Mendez, Jose Rene

    2015-10-01

    Various health problems associated with drinking water containing high fluoride levels, have motivated researchers to develop more efficient adsorbents to remove fluoride from water for beneficial concentrations to human health. The objective of this research was to anchor lanthanum oxyhydroxides on a commercial granular activated carbon (GAC) to remove fluoride from water considering the effect of the solution pH, and the presence of co-existing anions and organic matter. The activated carbon was modified with lanthanum oxyhydroxides by impregnation. SEM and XRD were performed in order to determine the crystal structure and morphology of the La(III) particles anchored on the GAC surface. FT-IR and pK(a)'s distribution were determined in order to elucidate both the possible mechanism of the lanthanum anchorage on the activated carbon surface and the fluoride adsorption mechanism on the modified material. The results showed that lanthanum ions prefer binding to carboxyl and phenolic groups on the activated carbon surface. Potentiometric titrations revealed that the modified carbon (GAC-La) possesses positive charge at a pH lower than 9. The adsorption capacity of the modified GAC increased five times in contrast to an unmodified GAC adsorption capacity at an initial F(-) concentration of 20 mg L(-1). Moreover, the presence of co-existing anions had no effect on the fluoride adsorption capacity at concentrations below 30 mg L(-1), that indicated high F(-) affinity by the modified adsorbent material (GAG-La). PMID:26070190

  5. Effect of chloride incorporation on the crystallization of zirconium-barium-lanthanum-aluminum fluoride glass

    NASA Technical Reports Server (NTRS)

    Neilson, G. F.; Smith, G. L.; Weinberg, M. C.

    1985-01-01

    One aspect of the influence of preparation procedure on the crystallization behavior of a zirconium-barium-lanthanum-aluminum fluoride glass was studied. The crystallization pattern of this glass may be affected by the chlorine concentration within it. In particular, when such glasses are heated at low temperatures, the alpha-Ba-Zr-F6 crystalline phase forms only in those glasses which contain chloride.

  6. Lanthanum

    MedlinePlus

    Lanthanum is used to reduce blood levels of phosphate in patients with kidney disease. High levels of phosphate in the blood can cause bone problems. Lanthanum is in a class of medications called phosphate ...

  7. METHOD OF SEPARATING PLUTONIUM FROM LANTHANUM FLUORIDE CARRIER

    DOEpatents

    Watt, G.W.; Goeckermann, R.H.

    1958-06-10

    An improvement in oxidation-reduction type methods of separating plutoniunn from elements associated with it in a neutron-irradiated uranium solution is described. The method relates to the separating of plutonium from lanthanum ions in an aqueous 0.5 to 2.5 N nitric acid solution by 'treating the solution, at room temperature, with ammonium sulfite in an amount sufficient to reduce the hexavalent plutonium present to a lower valence state, and then treating the solution with H/sub 2/O/sub 2/ thereby forming a tetravalent plutonium peroxide precipitate.

  8. Modification of carbon derived from Sargassum sp. by lanthanum for enhanced adsorption of fluoride.

    PubMed

    Yu, Yang; Wang, Chenghong; Guo, Xue; Paul Chen, J

    2015-03-01

    Excessive fluoride in water causes serious environmental issues and adverse impacts on human health. In this study, an innovative lanthanum-modified carbon (LMC) adsorbent rooted in Sargassum sp. was developed for fluoride removal. Excellent removal efficiency was observed over a wide pH range of 3-9. Almost 90% of fluoride adsorption occurred within the first 1h; the equilibrium was established within 4h. The maximum adsorption capacity of LMC could reach 94.34 mg/g at neutral pH, much higher than many commercial adsorbents. Although the presence of such competitive anions as SiO3(2-), SO4(2-), HCO3(-), PO4(3-) and AsO3(-) had certain interference on fluoride uptake, it was noticed that there was no significant impact in the presence of humic acid. Furthermore, according to the instrumental analysis, the fluoride removal was majorly controlled by outer-sphere complex adsorption, while electrostatic attraction and ion exchange mechanisms could also be observed in the fluoride adsorption process. The findings from this study suggest that our adsorbent may have a great potential in industrial applications. PMID:25498487

  9. Characterization and adsorption properties of a lanthanum-loaded magnetic cationic hydrogel composite for fluoride removal.

    PubMed

    Dong, Shuoxun; Wang, Yili

    2016-01-01

    In this study, a novel lanthanum-loaded magnetic cationic hydrogel (MCH-La) was synthesized for fluoride adsorption from drinking water. The adsorption kinetics, isotherms, and effects of pH and co-existing anions on fluoride uptake by MCH-La were evaluated. FTIR, Raman and XPS were used to analyze the fluoride adsorption mechanism of MCH-La. Results showed that MCH-La had positive zeta potential values of 23.6-8.0 mV at pH 3.0-11.0, with the magnitude of saturation magnetization up to 10.3 emu/g. The fluoride adsorption kinetics by MCH-La fitted well with the fractal-like-pseudo-second-order model, and the adsorption capacity reached 93% of the ultimate adsorption capacity within the first 10 min. The maximum fluoride adsorption capacity for MCH-La was 136.78 mg F(-)/g at an equilibrium fluoride concentration of 29.3 mg/L and pH 7.0. Equilibrium adsorption data showed that the Sips model was more suitable than the Langmuir and Freundlich models. MCH-La still had more than 100 mg of F(-)/g adsorption capacity at a strongly alkaline solution (pH > 10). The adsorption process was highly pH-dependent, and the optimal adsorption was attained at pH 2.8-4.0, corresponding to ligand exchange, electrostatic interactions, and Lewis acid-base interactions. With the exception of both anions of HCO3(-) and SiO4(4-), Cl(-), NO3(-), and SO4(2-) did not evidently prevent fluoride removal by MCH-La at their real concentrations in natural groundwater. The fluoride adsorption capacity of the regenerated MCH-La approached 70% of the fresh MCH-La from the second to fifth recycles. FTIR and Raman spectra revealed that C-O and CO functional groups on MCH contributed to the fluoride adsorption, this finding was also confirmed by the XPS F 1s spectra. Deconvolution of C 1s spectra before and after fluoride adsorption indicated that the carboxyl, anhydride, and phenol groups of MCH were involved in the fluoride removal. PMID:26613180

  10. Removal of fluoride from water using a novel sorbent lanthanum-impregnated bauxite.

    PubMed

    Vivek Vardhan, C M; Srimurali, M

    2016-01-01

    A novel sorbent, Lanthanum-Impregnated Bauxite (LIB), was prepared to remove fluoride from water. To understand the surface chemical composition and morphology, LIB was characterized using X-ray diffraction and scanning electron microscopy techniques. Experiments were performed to evaluate the sorption potential, dose of sorbent, kinetics, equilibrium sorption capacity, pH and influence of anions for defluoridation by LIB. Equilibrium isothermal studies were conducted to model the sorption and regeneration studies were carried out to evaluate the reusability of LIB. The results showed that LIB, at a dose of 2 g/L could remove 99 % of fluoride from an initial concentration of 20 mgF/L. Kinetic studies revealed the best fit of pseudo second order model. The sorption followed Langmuir isotherm model and the maximum sorption capacity of LIB for removal of fluoride was found to be 18.18 mg/g. Naturally occurring pH of water was found to be favorable for sorption. Usually occurring anions in water except nitrates influenced sorption of fluoride by LIB. PMID:27625980

  11. Low-temperature thermoluminescence spectra of rare-earth-doped lanthanum fluoride

    SciTech Connect

    Yang, B.; Townsend, P.D.; Rowlands, A.P.

    1998-01-01

    Lanthanum fluoride consistently shows two strong thermoluminescence glow peaks at low temperature in pure material near 90 and 128 K. A model is proposed in which these thermoluminescence peaks arise from the annealing of halogen defect sites, similar to the H and V{sub k} centers of the alkali halides. Relaxation and decay of these defects in the pure LaF{sub 3} lattice results in broad-band intrinsic luminescence. Addition of rare-earth-impurity ions has two effects. First, the broad-band emission is replaced by narrow-band line emission defined by the trivalent rare-earth dopants. Second, it preferentially determines the formation of the halogen defect sites at impurity lattice sites and such sites appear to increase in thermal stability since the glow peak temperature increases from 128 K in the intrinsic material up to 141 K through the sequence of rare-earth dopants from La to Er. The temperature movement directly correlates with the changes in ionic size of the rare-earth ions, when allowance is made for differences in effective coordination number of the impurity ions. The data suggest two alternative lattice sites can be occupied. The model emphasizes that the intense thermoluminescence signals arise from internal charge rearrangements and annealing of defect complexes, rather than through the more conventional model of separated charge traps and recombination centers. At higher temperatures there is a complex array of glow peaks which depend not only on the dopant concentration but also are specific to each rare earth. Such effects imply defect models giving thermoluminescence within localized complexes and possible reasons are mentioned. {copyright} {ital 1998} {ital The American Physical Society}

  12. Microstructural and ionic transport studies of hydrothermally synthesized lanthanum fluoride nanoparticles

    SciTech Connect

    Patro, L. N. E-mail: kbharath@umd.edu; Kamala Bharathi, K. E-mail: kbharath@umd.edu; Ravi Chandra Raju, N.

    2014-12-15

    This article presents the structural and transport characteristics of hydrothermally synthesized LaF{sub 3} nanoparticles with an average crystallite size of 35nm. The phase formation of the material is confirmed by both X-ray diffraction and transmission electron microscopy techniques. In addition, phase purity of the LaF{sub 3} nanoparticles is corroborated by micro-Raman spectroscopy studies. The complex impedance plots at different temperatures reveal that the conductivity is predominantly due to the intrinsic bulk grains and the conductivity relaxation is non-Debye in nature. The frequency variation of conductivity exhibits dispersion at higher frequencies that can be explained with the frame work of Almond-West formalism. The conduction process is controlled by the mobility of the charge carriers and the charge of transport of mobile fluoride ions occur through hopping mechanism. The scaling behavior of both frequency dependence of conductivity and complex impedance plots at different temperatures confirm that the relaxation mechanism of the mobile fluoride ions is independent of temperature.

  13. Microstructural and ionic transport studies of hydrothermally synthesized lanthanum fluoride nanoparticles

    NASA Astrophysics Data System (ADS)

    Patro, L. N.; Kamala Bharathi, K.; Ravi Chandra Raju, N.

    2014-12-01

    This article presents the structural and transport characteristics of hydrothermally synthesized LaF3 nanoparticles with an average crystallite size of 35nm. The phase formation of the material is confirmed by both X-ray diffraction and transmission electron microscopy techniques. In addition, phase purity of the LaF3 nanoparticles is corroborated by micro-Raman spectroscopy studies. The complex impedance plots at different temperatures reveal that the conductivity is predominantly due to the intrinsic bulk grains and the conductivity relaxation is non-Debye in nature. The frequency variation of conductivity exhibits dispersion at higher frequencies that can be explained with the frame work of Almond-West formalism. The conduction process is controlled by the mobility of the charge carriers and the charge of transport of mobile fluoride ions occur through hopping mechanism. The scaling behavior of both frequency dependence of conductivity and complex impedance plots at different temperatures confirm that the relaxation mechanism of the mobile fluoride ions is independent of temperature.

  14. Fluoride

    MedlinePlus

    Fluoride is used to prevent tooth decay. It is taken up by teeth and helps to strengthen ... and block the cavity-forming action of bacteria. Fluoride usually is prescribed for children and adults whose ...

  15. Fluoride

    MedlinePlus

    Fluoride is used to prevent tooth decay. It is taken up by teeth and helps to strengthen teeth, resist acid, and block the cavity-forming action of bacteria. Fluoride usually is prescribed for children ...

  16. Determination of Stability Constants of Hydrogen and Aluminum Fluorides with a Fluoride-Selective Electrode

    SciTech Connect

    Baumann, E.W.

    2003-01-06

    The ability to directly determine free fluoride ion concentration (or mean activity) simplifies gathering and interpretation of experimental data for studies of metal complexes. In this work, the new lanthanum fluoride electrode was used to measure free fluoride ion in an investigation of the hydrogen-fluoride and aluminum-fluoride systems in NH4NO3.

  17. Scintillator materials containing lanthanum fluorides

    DOEpatents

    Moses, W.W.

    1991-05-14

    An improved radiation detector containing a crystalline mixture of LaF[sub 3] and CeF[sub 3] as the scintillator element is disclosed. Scintillators made with from 25% to 99.5% LaF[sub 3] and the remainder CeF[sub 3] have been found to provide a balance of good stopping power, high light yield and short decay constant that is equal to or superior to other known scintillator materials, and which may be processed from natural starting materials containing both rare earth elements. The radiation detectors disclosed are favorably suited for use in general purpose detection and in positron emission tomography. 2 figures.

  18. Scintillator materials containing lanthanum fluorides

    DOEpatents

    Moses, William W.

    1991-01-01

    An improved radiation detector containing a crystalline mixture of LaF.sub.3 and CeF.sub.3 as the scintillator element is disclosed. Scintillators made with from 25% to 99.5% LaF.sub.3 and the remainder CeF.sub.3 have been found to provide a balance of good stopping power, high light yield and short decay constant that is equal to or superior to other known scintillator materials, and which may be processed from natural starting materials containing both rare earth elements. The radiation detectors disclosed are favorably suited for use in general purpose detection and in positron emission tomography.

  19. Investigation into Nanostructured Lanthanum Halides and CeBr{sub 3} for Nuclear Radiation Detection

    SciTech Connect

    Guss, P., Guise, R., Mukhopadhyay, S., Yuan, D.

    2011-06-22

    This slide-show presents work on radiation detection with nanostructured lanthanum halides and CeBr{sub 3}. The goal is to extend the gamma energy response on both low and high-energy regimes by demonstrating the ability to detect low-energy x-rays and relatively high-energy activation prompt gamma rays simultaneously using the nano-structured lanthanum bromide, lanthanum fluoride, cerium bromide, or other nanocrystal material. Homogeneous and nano structure cases are compared.

  20. Fluoridation Basics

    MedlinePlus

    ... Water Fluoridation Journal Articles for Community Water Fluoridation Water Fluoridation Basics Recommend on Facebook Tweet Share Compartir ... because of tooth decay. History of Fluoride in Water In the 1930s, scientists examined the relationship between ...

  1. Metals fact sheet - lanthanum

    SciTech Connect

    1995-04-01

    Mosander was the first to extract the elusive rare earth, lanthanum, from unrefined cerium nitrate in 1839. The name was derived from the Greek word lanthanein, meaning {open_quotes}to escape notice.{close_quotes} Lanthanum is the lightest rare earth and a very malleable metal-soft enough to be cut with a knife. Used primarily as an additive in steels and non-ferrous metals, lanthanum is the lightest rare earth element and one of four rare earths from which mischmetal is made. Additional applications include advanced batteries, optical fibers, and phosphors.

  2. Sintering aid for lanthanum chromite refractories

    DOEpatents

    Flandermeyer, Brian K.; Poeppel, Roger B.; Dusek, Joseph T.; Anderson, Harlan U.

    1988-01-01

    An electronically conductive interconnect layer for use in a fuel cell or other electrolytic device is formed with sintering additives to permit densification in a monolithic structure with the electrode materials. Additions including an oxide of boron and a eutectic forming composition of Group 2A metal fluorides with Group 3B metal fluorides and Group 2A metal oxides with Group 6B metal oxides lower the required firing temperature of lanthanum chromite to permit densification to in excess of 94% of theoretical density without degradation of electrode material lamina. The monolithic structure is formed by tape casting thin layers of electrode, interconnect and electrolyte materials and sintering the green lamina together under common densification conditions.

  3. Stabilized Lanthanum Sulphur Compounds

    NASA Technical Reports Server (NTRS)

    Reynolds, George H. (Inventor); Elsner, Norbert B. (Inventor); Shearer, Clyde H. (Inventor)

    1985-01-01

    Lanthanum sulfide is maintained in the stable cubic phase form over a temperature range of from 500 C to 1500 C by adding to it small amounts of calcium, barium. or strontium. This novel compound is an excellent thermoelectric material.

  4. Optimal Fluoridation

    PubMed Central

    Lee, John R.

    1975-01-01

    Optimal fluoridation has been defined as that fluoride exposure which confers maximal cariostasis with minimal toxicity and its values have been previously determined to be 0.5 to 1 mg per day for infants and 1 to 1.5 mg per day for an average child. Total fluoride ingestion and urine excretion were studied in Marin County, California, children in 1973 before municipal water fluoridation. Results showed fluoride exposure to be higher than anticipated and fulfilled previously accepted criteria for optimal fluoridation. Present and future water fluoridation plans need to be reevaluated in light of total environmental fluoride exposure. PMID:1130041

  5. Lanthanum-Induced Gastrointestinal Histiocytosis

    PubMed Central

    Araya, Hiwot; Longacre, Teri A.; Pasricha, Pankaj J.

    2015-01-01

    A patient with end-stage renal disease (ESRD) on hemodialysis presented with fever, anorexia, and nausea shortly after starting oral lanthanum carbonate for phosphate control. Gastric and duodenal biopsies demonstrated diffuse histiocytosis with intracellular aggregates of basophilic foreign material. Transmission electron microscopy, an underutilized diagnostic test, revealed the nature of the aggregates as heavy metal particles, consistent with lanthanum. Symptoms and histiocytosis improved after discontinuation of lanthanum. Lanthanum may be an underdiagnosed cause of gastrointestinal histiocytosis. PMID:26157959

  6. Systemic fluoride.

    PubMed

    Sampaio, Fábio Correia; Levy, Steven Marc

    2011-01-01

    There is substantial evidence that fluoride, through different applications and formulas, works to control caries development. The first observations of fluoride's effects on dental caries were linked to fluoride naturally present in the drinking water, and then from controlled water fluoridation programs. Other systemic methods to deliver fluoride were later suggested, including dietary fluoride supplements such as salt and milk. These systemic methods are now being questioned due to the fact that many studies have indicated that fluoride's action relies mainly on its post-eruptive effect from topical contact with the tooth structure. It is known that even the methods of delivering fluoride known as 'systemic' act mainly through a topical effect when they are in contact with the teeth. The effectiveness of water fluoridation in many geographic areas is lower than in previous eras due to the widespread use of other fluoride modalities. Nevertheless, this evidence should not be interpreted as an indication that systemic methods are no longer relevant ways to deliver fluoride on an individual basis or for collective health programs. Caution must be taken to avoid excess ingestion of fluoride when prescribing dietary fluoride supplements for children in order to minimize the risk of dental fluorosis, particularly if there are other relevant sources of fluoride intake - such as drinking water, salt or milk and/or dentifrice. Safe and effective doses of fluoride can be achieved when combining topical and systemic methods. PMID:21701196

  7. [Radiographic disappearance of lanthanum].

    PubMed

    Pastori, Giordano

    2015-01-01

    In 2006, Cerny and Kunzendorf in the New England Journal of Medicine Images in clinical medicine, showed the radiographic appearance of lanthanum for the first time. After many years we noticed the inverse phenomenon. In a peritoneal dialysis patient treated with lanthanum carbonate, we had two radiography of the abdomen for monitoring the peritoneal catheter. In the first radiography contrast material was seen in colon. In the most recent radiography contrast material disappeared. The patient was always taking the same dose of lanthanum carbonate (1000 mg bid), although at the time of the first radiography he took the chewable tablets, for the last radiography he took the new powder formulation. We found a report in literature highlighting this phenomenon meanwhile indicating a greater chelating effect for the powder. Our hypothesis is that despite the same lanthanum dose, powder provides a greater surface area of binding and a more dispersed bowel distribution to explain a masked radio-opacity. Considering the wide availability of the powder, this must be taken into account especially in evaluating therapeutic compliance. PMID:25774580

  8. PROCESS USING POTASSIUM LANTHANUM SULFATE FOR FORMING A CARRIER PRECIPITATE FOR PLUTONIUM VALUES

    DOEpatents

    Angerman, A.A.

    1958-10-21

    A process is presented for recovering plutonium values in an oxidation state not greater than +4 from fluoride-soluble fission products. The process consists of adding to an aqueous acidic solution of such plutonium values a crystalline potassium lanthanum sulfate precipitate which carries the plutonium values from the solution.

  9. Composite Gel Polymer Electrolyte Based on Poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) with Modified Aluminum-Doped Lithium Lanthanum Titanate (A-LLTO) for High-Performance Lithium Rechargeable Batteries.

    PubMed

    Le, Hang T T; Ngo, Duc Tung; Kalubarme, Ramchandra S; Cao, Guozhong; Park, Choong-Nyeon; Park, Chan-Jin

    2016-08-17

    A composite gel polymer electrolyte (CGPE) based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) polymer that includes Al-doped Li0.33La0.56TiO3 (A-LLTO) particles covered with a modified SiO2 (m-SiO2) layer was fabricated through a simple solution-casting method followed by activation in a liquid electrolyte. The obtained CGPE possessed high ionic conductivity, a large electrochemical stability window, and interfacial stability-all superior to that of the pure gel polymer electrolyte (GPE). In addition, under a highly polarized condition, the CGPE effectively suppressed the growth of Li dendrites due to the improved hardness of the GPE by the addition of inorganic A-LLTO/m-SiO2 particles. Accordingly, the Li-ion polymer and Li-O2 cells employing the CGPE exhibited remarkably improved cyclability compared to cells without CGPE. In particular, the CGPE as a protection layer for the Li metal electrode in a Li-O2 cell was effective in blocking the contamination of the Li electrode by oxygen gas or impurities diffused from the cathode side while suppressing the Li dendrites. PMID:27463563

  10. Dentifrice Fluoride

    NASA Astrophysics Data System (ADS)

    Rakita, Philip E.

    2004-05-01

    The effectiveness of the fluoride ion in lowering the incidence of dental caries is a major factor in the field of dental health. Observations and research studies in the first half of the 20th century have lead to the widespread adoption of fluoridated water and the use of inorganic fluoride compounds in oral care products, such as toothpaste and dental rinses. This article provides a brief review of the types of compounds used and the chemistry involved.

  11. Bottled Water and Fluoride

    MedlinePlus

    ... Fluoridation Journal Articles for Community Water Fluoridation Bottled Water Recommend on Facebook Tweet Share Compartir Consumers drink ... questions about bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, ...

  12. Metallic behavior of lanthanum disilicide

    NASA Technical Reports Server (NTRS)

    Long, Robert G.; Bost, M. C.; Mahan, John E.

    1988-01-01

    Polycrystalline thin films of LaSi2 were prepared by reaction of sputter-deposited lanthanum layers with silicon wafers. Samples of the low-temperature tetragonal and the high-temperature orthorhombic phases were separately obtained. The room-temperature intrinsic resistivities were 24 and 57 microohm cm for the low- and high-temperature structures, respectively. Although lanthanum disilicide had been previously reported to be a semiconductor, classical metallic behavior was found for both phases.

  13. Divalent fluoride doped cerium fluoride scintillator

    DOEpatents

    Anderson, David F.; Sparrow, Robert W.

    1991-01-01

    The use of divalent fluoride dopants in scintillator materials comprising cerium fluoride is disclosed. The preferred divalent fluoride dopants are calcium fluoride, strontium fluoride, and barium fluoride. The preferred amount of divalent fluoride dopant is less than about two percent by weight of the total scintillator. Cerium fluoride scintillator crystals grown with the addition of a divalent fluoride have exhibited better transmissions and higher light outputs than crystals grown without the addition of such dopants. These scintillators are useful in radiation detection and monitoring applications, and are particularly well suited for high-rate applications such as positron emission tomography (PET).

  14. Lanthanum Bromide Detectors for Safeguards Measurements

    SciTech Connect

    Wright, J.

    2011-05-25

    Lanthanum bromide has advantages over other popular inorganic scintillator detectors. Lanthanum bromide offers superior resolution, and good efficiency when compared to sodium iodide and lanthanum chloride. It is a good alternative to high purity germanium detectors for some safeguards applications. This paper offers an initial look at lanthanum bromide detectors. Resolution of lanthanum bromide will be compared lanthanum chloride and sodium-iodide detectors through check source measurements. Relative efficiency and angular dependence will be looked at. Nuclear material spectra, to include plutonium and highly enriched uranium, will be compared between detector types.

  15. [Lanthanum carbonate in clinical practice].

    PubMed

    Torregrosa Prats, V

    2008-01-01

    Lanthanum is an element belonging to the group called rare earths. Due to its low solubility, lanthanum carbonate has been widely studied as an intestinal phosphate binder. The results of different clinical trials show that it is an effective and well-tolerated phosphate binder used in monotherapy. Serum phosphate levels are controlled in approximately 70% of patients at 5 years without causing hypercalcemia. The only significant adverse effects observed are a low percentage of gastrointestinal disturbances (6%). Lanthanum carbonate does not alter serum values of liposoluble vitamins or affect the pharmacokinetics of digoxin, warfarin, furosemide, phenytoin, ACE inhibitors or beta-blockers. However, it does alter the pharmacokinetics of ciprofloxacin (quinolones in general), tetracyclines and doxycycline. Lanthanum carbonate (Fosrenol) is available in Spain as 500 mg, 750 mg, and 1,000 mg chewable tablets, which should not be swallowed without chewing to avoid loss of efficacy. The initial dose recommended by the WHO is 2,250 mg/day, which is equivalent to one 750 mg at each meal. Lanthanum carbonate or lanthanum phosphate can be clearly visualized on a plain x-ray of the abdomen in patients who have recently ingested it. In summary, lanthanum carbonate is a widely studied potent phosphate binder, which offers the possibility of improving control of serum phosphate in patients with chronic kidney disease, without significant side effects. The fact that it is available as chewable tablets and that the number of daily tablets required has been significantly reduced will probably facilitate better patient compliance. PMID:18847414

  16. Chlorination of lanthanum oxide.

    PubMed

    Gaviría, Juan P; Navarro, Lucas G; Bohé, Ana E

    2012-03-01

    The reactive system La(2)O(3)(s)-Cl(2)(g) was studied in the temperature range 260-950 °C. The reaction course was followed by thermogravimetry, and the solids involved were characterized by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The results showed that the reaction leads to the formation of solid LaOCl, and for temperatures above 850 °C, the lanthanum oxychloride is chlorinated, producing LaCl(3)(l). The formation of the oxychloride progresses through a nucleation and growth mechanism, and the kinetic analysis showed that at temperatures below 325 °C the system is under chemical control. The influence of diffusive processes on the kinetics of production of LaOCl was evaluated by studying the effect of the reactive gas flow rate, the mass of the sample, and the chlorine diffusion through the boundary layer surrounding the solid sample. The conversion curves were analyzed and fitted according to the Johnson-Mehl-Avrami description, and the reaction order with respect to the chlorine partial pressure was obtained by varying this partial pressure between 10 and 70 kPa. The rate equation was obtained, which includes the influence of the temperature, chlorine partial pressure, and reaction degree. PMID:22280490

  17. Containerless processing of fluoride glass

    NASA Technical Reports Server (NTRS)

    Doremus, Robert H.

    1990-01-01

    Ground-based experiments on glass formation, crystallization, surface tension, vaporization, and chemical durability of a zirconium-barium-lanthanum (ZBL) fluoride glass are summarized. In a container large, columnar grains grew out from the container-glass interface during cooling. The main crystalline phase was alpha BaZrF6. A ZBL glass sphere was levitated acoustically during Shuttle flight STS-11. The glass was melted and then cooled while being levitated (containerless). Crystallization in the recovered sample was very fine and mainly beta BaZr2F10, showing the influence of the container on the nucleation and microstructure of crystallization in the glass. Glass formation should be easier for a containerless glass than in a container.

  18. Preparation of porous lanthanum phosphate with templates

    SciTech Connect

    Onoda, Hiroaki; Ishima, Yuya; Takenaka, Atsushi; Tanaka, Isao

    2009-08-05

    Malonic acid, propionic acid, glycine, n-butylamine, and urea were added to the preparation of lanthanum phosphate from lanthanum nitrate and phosphoric acid solutions. All additives were taken into lanthanum phosphate particles. The additives that have a basic site were easy to contain in precipitates. The addition of templates improved the specific surface area of lanthanum phosphate. The amount of pore, with radius smaller than 4 nm, increased with the addition of templates. The remained additives had influence on the acidic properties of lanthanum phosphate.

  19. Ames Lab 101: Lanthanum Decanting

    SciTech Connect

    Riedemann, Trevor

    2010-01-01

    Ames Laboratory scientist Trevor Riedemann explains the process that allows Ames Laboratory to produce some of the purest lanthanum in the world. This and other high-purity rare-earth elements are used to create alloys used in various research projects and play a crucial role in the Planck satellite mission.

  20. Ames Lab 101: Lanthanum Decanting

    ScienceCinema

    Riedemann, Trevor

    2012-08-29

    Ames Laboratory scientist Trevor Riedemann explains the process that allows Ames Laboratory to produce some of the purest lanthanum in the world. This and other high-purity rare-earth elements are used to create alloys used in various research projects and play a crucial role in the Planck satellite mission.

  1. Fluoride in diet

    MedlinePlus

    ... Infants can only get fluoride through drinking infant formulas. Breast milk has a negligible amount of fluoride ... of water to use in concentrated or powdered formulas. DO NOT use any fluoride supplement without talking ...

  2. Rapid Synthesis of Nonstoichiometric Lanthanum Sulfide

    NASA Technical Reports Server (NTRS)

    Matsuda, S.; Shapiro, E.; Danielson, L.; Hardister, H.

    1987-01-01

    New process relatively fast and simple. Improved method of synthesizing nonstoichiometric lanthanum sulfide faster and simpler. Product purer because some of prior sources of contamination eliminated.

  3. Thermoelectric Properties of Lanthanum Sulfide

    NASA Technical Reports Server (NTRS)

    Wood, C.; Lockwood, R.; Parker, J. B.; Zoltan, A.; Zoltan, L. D.; Danielson, L.; Raag, V.

    1987-01-01

    Report describes measurement of Seebeck coefficient, electrical resistivity, thermal conductivity, and Hall effect in gamma-phase lanthanum sulfide with composition of La3-x S4. Results of study, part of search for high-temperature thermoelectric energy-conversion materials, indicate this sulfide behaves like extrinsic semiconductor over temperature range of 300 to 1,400 K, with degenerate carrier concentration controlled by stoichiometric ratio of La to S.

  4. Multifunctionality of nanocrystalline lanthanum ferrite

    NASA Astrophysics Data System (ADS)

    Rai, Atma; Thakur, Awalendra K.

    2016-05-01

    Nanocrystalline lanthanum ferrite has been synthesized by adopting modified Pechini route. No evidence of impurity or secondary phase has been detected up to the detection of error limit of X-ray diffractometer (XRD). Rietveld refinement of X-ray diffraction pattern reveals orthorhombic crystal system with space group Pnma (62).Crystallite size and lattice strain was found to be ˜42.8nm and 0.306% respectively. Optical band gap was found to be 2.109 eV, by UV-Visible diffused reflectance spectrum (DRS). Brunauer-Emmet-Teller (BET) surface area was found to be ˜3.45 m2/g. Magnetization-hysteresis (M-H) loop was recorded at room temperature (300K) reveals weak ferromagnetism in Nanocrystalline lanthanum ferrite. The weak ferromagnetism in lanthanum ferrite is due to the uncompensated antiferromagnetic spin ordering. Ferroelectric loop hysteresis observed at room temperature at 100Hz depicts the presence of ferroelectric ordering in LaFeO3.Simultanious presence of magnetic and ferroelectric ordering at room temperature makes it suitable candidate of Multiferroic family.

  5. How Does Fluoride Work?

    MedlinePlus

    ... Help White House Lunch Recipes How Does Fluoride Work? KidsHealth > For Kids > How Does Fluoride Work? Print A A A Text Size There's fluoride ... even in your water. But how does it work to keep teeth healthy? Let's find out. Fluoride ...

  6. Fluoride and Water (For Parents)

    MedlinePlus

    ... Things to Know About Zika & Pregnancy Fluoride and Water KidsHealth > For Parents > Fluoride and Water Print A ... to 19-year-olds continue Fluoride and the Water Supply For more than 60 years, water fluoridation ...

  7. Absolute bioavailability and disposition of lanthanum in healthy human subjects administered lanthanum carbonate.

    PubMed

    Pennick, Michael; Dennis, Kerry; Damment, Stephen J P

    2006-07-01

    Lanthanum carbonate [La2(CO3)3] is a noncalcium, non-aluminum phosphate binder indicated for hyperphosphatemia treatment in end-stage renal disease. A randomized, open-label, parallel-group, phase I study was conducted to determine absolute bioavailability and investigate excretory routes for systemic lanthanum in healthy subjects. Twenty-four male subjects were randomized to a single lanthanum chloride (LaCl3) intravenous infusion (120 microg elemental lanthanum over a 4-hour period), a single 1-g oral dose [chewable La2(CO3)3 tablets; 4 x 250 mg elemental lanthanum], or no treatment (control). Serial blood, urine, and fecal samples were collected for 7 days postdosing. The absolute bioavailability of lanthanum [administered as La2(CO3)3] was extremely low (0.00127% +/- 0.00080%), with individual values in the range of 0.00015% to 0.00224%. Renal clearance was negligible following oral administration (1.36 +/- 1.43 mL/min). Intravenous administration confirmed low renal clearance (0.95 +/- 0.60 mL/min), just 1.7% of total plasma clearance. Fecal lanthanum excretion was not quantifiable after intravenous administration owing to high and variable background fecal lanthanum and constraints on the size of the intravenous dose. These findings demonstrate that lanthanum absorption from the intestinal tract into the systemic circulation is extremely low and that absorbed drug is cleared predominantly by nonrenal mechanisms. PMID:16809799

  8. Fluoridation update 2014.

    PubMed

    Allukian, Myron; Wong, Chloe

    2014-01-01

    This year more than 4 million people living in 140 communities in Massachusetts will have the health and economic benefits of community water fluoridation. However Massachusetts is ranked only 37th in the country for fluoridation, with just 62 percent of the population on a public water supply living in fluoridated communities. Nationally, more than 210 million Americans, about 74.6 percent of the U.S. population on a community water supply live in fluoridated communities. PMID:25226771

  9. Stabilized lanthanum sulphur compounds. [thermoelectric materials

    NASA Technical Reports Server (NTRS)

    Reynolds, G. H.; Elsner, N. B.; Shearer, C. H. (Inventor)

    1983-01-01

    Lanthanum sulfide is maintained in the stable cubic phase form over a temperature range of from 500 C to 1500 C by adding to it small amounts of calcium, barium, or strontium. This compound is an excellent thermoelectric material.

  10. Field free, directly heated lanthanum boride cathode

    DOEpatents

    Leung, Ka-Ngo; Moussa, D.; Wilde, S.B.

    1987-02-02

    A directly heated cylindrical lanthanum boride cathode assembly is disclosed which minimizes generation of magnetic field which would interfere with electron emission from the cathode. The cathode assembly comprises a lanthanum boride cylinder in electrical contact at one end with a central support shaft which functions as one electrode to carry current to the lanthanum boride cylinder and in electrical contact, at its opposite end with a second electrode which is coaxially position around the central support shaft so that magnetic fields generated by heater current flowing in one direction through the central support shaft are cancelled by an opposite magnetic field generated by current flowing through the lanthanum boride cylinder and the coaxial electrode in a direction opposite to the current flow in the central shaft.

  11. Field free, directly heated lanthanum boride cathode

    DOEpatents

    Leung, Ka-Ngo; Moussa, David; Wilde, Stephen B.

    1991-01-01

    A directly heated cylindrical lanthanum boride cathode assembly is disclosed which minimizes generation of magnetic fields which would interfere with electron emission from the cathode. The cathode assembly comprises a lanthanum boride cylinder in electrical contact at one end with a central support shaft which functions as one electrode to carry current to the lanthanum boride cylinder and in electrical contact, at its opposite end with a second electrode which is coaxially position around the central support shaft so that magnetic fields generated by heater current flowing in one direction through the central support shaft are cancelled by an opposite magnetic field generated by current flowing through the lanthanum boride cylinder and the coaxial electrode in a direction opposite to the current flow in the central shaft.

  12. Lanthanum

    MedlinePlus

    ... medications called phosphate binders. It works by preventing absorption of phosphate from food in the stomach. ... it at room temperature and away from excess heat and moisture (not in the bathroom). Throw away ...

  13. Protactinium distribution in a fluoride melt in the presence of solid oxide phases

    SciTech Connect

    Alekseev, V.A.; Ziv, V.S.; Morozova, Z.E.

    1989-01-01

    Measurements have been made on protactinium distributions between molten lithium and sodium fluorides and solid lanthanum or zirconium oxides as affected by time, amount of solid, and amount of gas (air of argon) at 1023 K. Protactinium can be extracted quantitatively from LiF-NaF melts by the two oxides. It is found that all the regularities previously reported for actinoid distributions in halide liquids in the presence of oxides apply to protactinium.

  14. Fluoride glass starting materials - Characterization and effects of thermal treatment

    NASA Technical Reports Server (NTRS)

    Chen, William; Dunn, Bruce; Shlichta, Paul; Neilson, George F.; Weinberg, Michael C.

    1987-01-01

    The production of heavy metal fluoride (HMF) glasses, and the effects of thermal treatments on the HMF glasses are investigated. ZrF4, BaF2, AlF3, LaF3, and NaF were utilized in the synthesis of zirconium-barium-lanthanum-aluminum-sodium fluoride glass. The purity of these starting materials, in particular ZrF4, is evaluated using XRD analysis. The data reveal that low temperature heating of ZrF4-H2O is effective in removing the water of hydration, but causes the production of ZrF4 and oxyfluorides; however, dehydration followed by sublimation results in the production of monoclinic ZrFe without water or oxyfluoride contaminants.

  15. Fluoride and Oral Health.

    PubMed

    O'Mullane, D M; Baez, R J; Jones, S; Lennon, M A; Petersen, P E; Rugg-Gunn, A J; Whelton, H; Whitford, G M

    2016-06-01

    The discovery during the first half of the 20th century of the link between natural fluoride, adjusted fluoride levels in drinking water and reduced dental caries prevalence proved to be a stimulus for worldwide on-going research into the role of fluoride in improving oral health. Epidemiological studies of fluoridation programmes have confirmed their safety and their effectiveness in controlling dental caries. Major advances in our knowledge of how fluoride impacts the caries process have led to the development, assessment of effectiveness and promotion of other fluoride vehicles including salt, milk, tablets, toothpaste, gels and varnishes. In 1993, the World Health Organization convened an Expert Committee to provide authoritative information on the role of fluorides in the promotion of oral health throughout the world (WHO TRS 846, 1994). This present publication is a revision of the original 1994 document, again using the expertise of researchers from the extensive fields of knowledge required to successfully implement complex interventions such as the use of fluorides to improve dental and oral health. Financial support for research into the development of these new fluoride strategies has come from many sources including government health departments as well as international and national grant agencies. In addition, the unique role which industry has played in the development, formulation, assessment of effectiveness and promotion of the various fluoride vehicles and strategies is noteworthy. This updated version of 'Fluoride and Oral Health' has adopted an evidence-based approach to its commentary on the different fluoride vehicles and strategies and also to its recommendations. In this regard, full account is taken of the many recent systematic reviews published in peer reviewed literature. PMID:27352462

  16. Determination of lanthanum by flame photometric titration.

    PubMed

    Svehla, G; Slevin, P J

    1968-09-01

    The flame emission of lanthanum at 560 mmu decreases linearly with phosphate concentration until a 1:1 molar ratio is reached, and then remains practically constant. Lanthanum can be titrated with phosphate, the equivalence point being detected from the change in emission intensity. Errors due to consumption of solution by the atomizer can be kept low by using short spraying times and low galvanometer damping. The average error is about -1% for 0.1M solutions and less than -5% for 0.01M. The method gives good results in the presence of titanium(III), zirconium, thorium and aluminium but cerium(III) and yttrium seriously interfere. PMID:18960392

  17. Development of Lanthanum Ferrite SOFC Cathodes

    SciTech Connect

    Simner, Steve P.; Bonnett, Jeff F.; Canfield, Nathan L.; Meinhardt, Kerry D.; Shelton, Jayne P.; Sprenkle, Vince L.; Stevenson, Jeffry W.

    2003-01-01

    A number of studies have been conducted concerning compositional/microstructural modifications of a Sr-doped lanthanum ferrite (LSF) cathode and protective Sm-doped ceria (SDC) layer in an anode supported solid oxide fuel cell (SOFC). Emphasis was placed on achieving enhanced low temperature (700-800 degrees C) performance, and long-term cell stability. Investigations involved manipulation of the lanthanum ferrite chemistry, addition of noble metal oxygen reduction catalysts, incorporation of active cathode layer compositions containing Co, Fe and higher Sr contents, and attempts to optimize the ceria barrier layer between the LSF cathode and YSZ electrolyte.

  18. Fluoride in UK rivers.

    PubMed

    Neal, Colin; Neal, Margaret; Davies, Helen; Smith, Jennifer

    2003-10-01

    Fluoride concentrations in eastern UK rivers (the Humber, Tweed, Wear, Great Ouse and Thames) are described based on information collected within the Land-Ocean Interaction Study (LOIS) and by the Environment Agency (EA) of England and Wales. The results show varied fluoride concentrations across the region, with a range from <0.01 to >10 mg l(-1); and mean, median and range in mean concentrations of 0.30, 0.21 and 0.05-3.38 mg l(-1) (excluding one outlier point), respectively. Within the main rivers and tributaries, the mean fluoride concentration varied from approximately 0.5 to over 2 mg l(-1) and the highest values occurred within the Don basin (Don, Dearne and Rother) and parts of the Trent basin (upper Tame and mid-upper Derbyshire Derwent) in highly industrialised and urbanised areas (Sheffield and Rotherham in the Don basin; Birmingham and Derby on the Trent). For localised inputs to the rivers, fluoride concentrations were slightly higher, and considerably higher in one outlier case. Correspondingly, the other rivers examined typically had mean fluoride concentrations between approximately 0.2 and 0.5 mg l(-1), but fluoride concentrations were lower in the headwater areas. As there is much less information on fluoride levels in upland areas, extensive data collected as part of an acid waters survey are used to show that fluoride concentrations are generally less than 0.1 mg l(-1) for the upland UK. The data are summarised in terms of both fluoride concentrations and flux, and the values are cross-referenced to other determinands collected within LOIS. The high positive correlation with boron and negative correlation with flow show the importance of point source (sewage) inputs of fluoride, while strong positive correlations between fluoride and barium indicate the relative importance of vein mineralisation in the bedrock in supplying fluoride to the waters of the Yorkshire Ouse and its tributaries. There seems to be some process that limits the fluoride

  19. Fluorides and non-fluoride remineralization systems.

    PubMed

    Amaechi, Bennett T; van Loveren, Cor

    2013-01-01

    Caries develops when the equilibrium between de- and remineralization is unbalanced favoring demineralization. De- and remineralization occur depending on the degree of saturation of the interstitial fluids with respect to the tooth mineral. This equilibrium is positively influenced when fluoride, calcium and phosphate ions are added favoring remineralization. In addition, when fluoride is present, it will be incorporated into the newly formed mineral which is then less soluble. Toothpastes may contain fluoride and calcium ions separately or together in various compounds (remineralization systems) and may therefore reduce demineralization and promote remineralization. Formulating all these compounds in one paste may be challenging due to possible premature calcium-fluoride interactions and the low solubility of CaF2. There is a large amount of clinical evidence supporting the potent caries preventive effect of fluoride toothpastes indisputably. The amount of clinical evidence of the effectiveness of the other remineralization systems is far less convincing. Evidence is lacking for head to head comparisons of the various remineralization systems. PMID:23817057

  20. PRODUCTION OF THORIUM FLUORIDE

    DOEpatents

    Zachariasen, W.H.

    1959-08-11

    A process is presented for producing anhydrous thorium fluoride comprising the step of contacting a saturated aqueous solution of thorium nitrate with an aqueous solution of hydrofluoric acid having a concentration of about 45 to 50% by weight at a temperature above 70 deg C whereby anhydrous thorium fluoride precipitates.

  1. Massachusetts fluoridation update 2006.

    PubMed

    Allukian, Myron

    2006-01-01

    Massachusetts has a long history of activity with community water fluoridation. Although the state has 3.8 million people living in 137 fluoridated communities, there are more than 2 million people who do not have these benefits. The Bay State is ranked 35th in the country regarding the percent of people on public water supplies with fluoridation. We can do better than that. We have more than 60 years of experience receiving the health and economic benefits of fluoridation in our country; however, there is still a lot of misinformation about fluoridation, and the unreliable nature of information posted on the Internet exacerbates much of this misinformation. Dental professionals, their patients, and decision-makers must be continuously educated about the safety, health, and economic benefits of community water fluoridation. Patients from 6 months to 16 years of age living in nonfluoridated communities should be prescribed supplemental fluoride. Dental professionals in nonfluoridated communities should assist them to become fluoridated. All dental professionals need to become more involved in the leadership of their communities. PMID:16683510

  2. Indium fluoride glass fibers

    NASA Astrophysics Data System (ADS)

    Saad, Mohammed

    2012-03-01

    Fluoride glasses are the only material that transmit light from ultraviolet to mid-infrared and can be drawn into industrial optical fibers. The mechanical and optical properties of new indium fluoride glass fibers have been investigated. Multimode fiber 190 microns, has very high mechanical strength greater than 100 kpsi and optical loss as low as 45 dB/km between 2 and 4 microns. Unlike chalcogenide glass fibers, indium fluoride fiber has a wide transmission window from 0.3 to 5.5 microns without any absorption peak. Indium fluoride glass fibers are the technology of choice for all application requiring transmission up to 5 micron such as infrared contour measure (IRCM) and chemical sensing. Furthermore, Indium fluoride glasses have low phonon energy and can be heavily doped and co-doped whit rare-earth elements. Therefore they are very promising candidates for infrared fiber lasers.

  3. Enhanced electrochemical properties of fluoride-coated LiCoO2 thin films.

    PubMed

    Lee, Hye Jin; Kim, Seuk Buom; Park, Yong Joon

    2012-01-01

    The electrochemical properties of fluoride-coated lithium cobalt oxide [LiCoO2] thin films were characterized. Aluminum fluoride [AlF3] and lanthanum fluoride [LaF3] coating layers were fabricated on a pristine LiCoO2 thin film by using a spin-coating process. The AlF3- and LaF3-coated films exhibited a higher rate capability, cyclic performance, and stability at high temperature than the pristine film. This indicates that the AlF3 and LaF3 layers effectively protected the surface of the pristine LiCoO2 film from the reactive electrolyte. PMID:22221488

  4. Automatic microdistillation flow-injection system for the spectrophotometric determination of fluoride.

    PubMed

    Shimada, Katsuhisa; Shimoda, Tetsuro; Kokusen, Hisao; Nakano, Shigenori

    2005-03-31

    An automatic flow-injection (FI) system including on-line separation by microdistillation and spectrophotometric detection has been developed for the determination of trace amounts of fluoride. This ion was separated from sample matrix by distillation in the presence of sulfuric and phosphoric acids, and was subsequently determined with spectrophotometry based on the mixed-ligand complex of lanthanum(III)-fluoride-alizarin complexone. The proposed FI system has high sampling frequency (20 samplesh(-1)), small sample size (600 microl) and the dynamic range of 0.05-15 mgl(-1) with relative standard deviations of below 1.2%. Interfering ions such as aluminum(III) and iron(III) was effectively eliminated. The method was successfully applied to the determination of fluoride in industrial drainage after water treatment. PMID:18969965

  5. Fluoridation: strategies for success.

    PubMed

    Isman, R

    1981-07-01

    Of 19 referenda on community water fluoridation held in the first six months of 1980, 17 were defeated. Among the postulated reasons are a growing distrust of government and the health establishment. The public remains largely ignorant of the purpose and benefits of fluoridation. The emotionalism surrounding the issue has made it difficult to generate public support outside of the health professions. Opponents have also learned to fight fluoridation with increasingly sophisticated techniques. Some of the strategies used in recent successful campaigns in Oakland, California, and Portland, Oregon are described; recommendations that can be applied to communities considering fluoridation include careful wording of ballot measures so they are unequivocally clear and simple; timing ballot measures with elections likely to draw the largest voter turnout; broadening the base of political and financial support; using a figurehead if possible; and making maximum use of the media. PMID:7246838

  6. Fluoride in diet

    MedlinePlus

    ... broken through the gums have changes in the enamel that covers the teeth. Faint white lines or ... regarding fluoride intake from reconstituted infant formula and enamel fluorosis: a report of the American Dental Association ...

  7. Fluoride toothpastes, rinses, and tablets.

    PubMed

    Stephen, K W

    1994-07-01

    Only from the mid-1950's has therapeutic benefit been obtained via dentifrices, initially with stannous fluoride-then monofluorophosphate-containing products which remained stable and efficacious. Altered abrasive systems followed, and both sodium fluoride and monofluorophosphate/sodium fluoride mixtures were introduced as active anti-caries agents, with recent meta-analysis indicating that sodium fluoride > monofluorophosphate/sodium fluoride > monofluorophosphate. With respect to fluoride levels, clear dose-response relationships have been demonstrated. However, at < 1000 ppm F, the situation is less certain. Since the mid-1980's, anticalculus fluoride dentifrices have been marketed, and have been shown to have similar caries-reducing potential as their non-calculus-inhibiting control formulae. Finally, one study has been described where a sodium fluoride dentifrice successfully reduced root caries. Of the many fluoride formulations used for caries-inhibiting mouthrinsing [e.g., acid phosphate fluoride (100-3000 ppm F), sodium fluoride (45-3000 ppm F), stannous fluoride (100-250 ppm F), ammonium fluoride (1000 ppm F), and amine fluoride (250 ppm F)], sodium fluoride would seem to be the preferred agent. Furthermore, rinse frequency is deemed more important than fluoride ion concentration, but caution is urged re the volumes and concentrations to be used by children, no rinsing being recommended below 4 years. Combination of a 440-pp-F sodium fluoride and 0.05% chlorhexidine school-administered rinse appears to have increased the caries-inhibiting benefit as compared with sodium fluoride alone. Fluoride supplements have reduced deciduous caries from 14 to 93%, and in the permanent dentition, from 20 to 81%.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7865074

  8. Process for converting magnesium fluoride to calcium fluoride

    DOEpatents

    Kreuzmann, A.B.; Palmer, D.A.

    1984-12-21

    This invention is a process for the conversion of magnesium fluoride to calcium fluoride whereby magnesium fluoride is decomposed by heating in the presence of calcium carbonate, calcium oxide or calcium hydroxide. Magnesium fluoride is a by-product of the reduction of uranium tetrafluoride to form uranium metal and has no known commercial use, thus its production creates a significant storage problem. The advantage of this invention is that the quality of calcium fluoride produced is sufficient to be used in the industrial manufacture of anhydrous hydrogen fluoride, steel mill flux or ceramic applications.

  9. Fluoride release from fissure sealants.

    PubMed

    Garcia-Godoy, F; Abarzua, I; De Goes, M F; Chan, D C

    1997-01-01

    This 30-day study, compared the amounts and patterns of fluoride release from 5 commercially available fluoride-containing pit and fissure sealants: FluroShield, Helioseal-F, Ultraseal XT, Baritone L3, and Teethmate-F; Delton without fluoride, was used as control. Disc-shaped samples of each sealant were immersed in distilled water and the fluoride release was measured periodically until day 30. All the fluoridated sealants tested released measurable fluoride throughout the test period in a similar pattern: the greatest amount of fluoride was released in the first 24 hours after mixing, fell sharply on the second day and decreased slowly for the last days. On day one, Baritone L3 released significantly more fluoride than all other materials. Teethmate-F released the highest amount of fluoride during all the other time intervals from day 2, until day 30. PMID:9643204

  10. Adsorption of lanthanum to goethite in the presence of gluconate

    SciTech Connect

    Hull, Laurence C.; Sarah Pepper; Sue Clark

    2005-05-01

    Adsorption of Lanthanum to Goethite in the Presence of Gluconic Acid L. C. HULL,1 S. E. PEPPER2 AND S. B. CLARK2 1Idaho National Engineering and Environmental Laboratory, Idaho Falls, ID (hulllc@inel.gov) 2Washington State University, Pullman, WA (spepper@wsu.edu), (s_clark@wsu.edu) Lanthanide and trivalent-actinide elements in radioactive waste can pose risks to humans and ecological systems for many years. Organic complexing agents, from natural organic matter or the degradation of waste package components, can alter the mobility of these elements. We studied the effect of gluconic acid, as an analogue for cellulose degradation products, on the adsorption of lanthanum, representing lanthanide and trivalent-actinide elments, to goethite, representing natural iron minearals and degradation products of waste packages. Batch pH adsorption edge experiments were conducted with lanthanum alone, and with lanthanum and gluconate at a 1:1 mole ratio. Lanthanum concentrations studied were 0.1, 1, and 10 mM, covering a range from 10% to 1000% of the calculated available adsorption sites on goethite. In the absence of gluconate, lanthanum was primarily present in solution as free lanthanum ion. With gluconate present, free lanthanum concentration in solution decreased with increasing pH as step-wise deprotonation of the gluconate molecule increased the fraction lanthanum complexed with gluconate. Adsorption to the goethite surface was represented with the diffuse double-layer model. The number of adsorption sites and the intrinsic binding constants for the surface complexes were estimated from the pH adsorption edge data using the computer code FITEQL 4.0. Two surface reactions were used to fit the adsorption data in the absence of gluconate. A strong binding site with no proton release and a much higher concentration of weak binding sites with release of two protons per lanthanum adsorbed. The adsorption of lanthanum was not measurably affected by the presence of gluconate

  11. Sorption of lanthanum ions by natural clinoptilolite tuff

    NASA Astrophysics Data System (ADS)

    Dampilova, B. V.; Zonkhoeva, E. L.

    2013-08-01

    The equilibrium and kinetics of sorption of lanthanum ions on natural clinoptilolite tuff are studied. It is demonstrated that sorption of lanthanum ions from diluted solutions occurs in micropores of clinoptilolite, and from concentrated solutions in the mesoporous structure of tuff. The main capacity of zeolite tuff is found in the secondary porous structure. The sorption of lanthanum ions is limited by diffusion in tuff grains. Lanthanum ions are regularly distributed in the tuff phase and interact with the Brønsted centers of large clinoptilolite cavities.

  12. Cost Reduction of Lanthanum Chromite Materials

    SciTech Connect

    Simner, Steve P. ); Stevenson, Jeffry W. ); Hardy, John S. ); Chick, Lawrence A. )

    2000-01-01

    Acceptor doped lanthanum chromite (LaCrO3) has long been the interconnect material of choice for high temperature SOFCs, typically operating at 1000?C. However, lanthanum chromite is relatively expensive, and many developers are currently pursuing SOFCs operating at lower temperatures. As the operating temperature is lowered, metal interconnects (e.g., ferritic steels or chromium alloys) become increasingly viable, but they have their own unique problems (including Cr-oxide formation and Cr volatilization), and it is therefore likely that uncoated metals cannot be used at temperatures greater than 700?C. For intermediate operating temperatures (700-800?C), the application of protective oxide coatings may allow the use of metal interconnects (if such coatings can be applied cost-effectively), but lanthanum chromite may offer better long-term performance. While the electrical conductivity of lanthanum chromite does decrease as temperature decreases, the conductivity at 800?C is only about 10% less than the conductivity at 1000?C. In this study, the authors have investigated the viability of replacing pure La in the acceptor doped LaCrO3 with a less expensive mixed lanthanide (Ln) precursor containing La3+ as the principle cation, but also Ce4+, Nd3+ and Pr3+ in significant proportions. Typical compositions investigated were of the formula Ln0.85Sr0.15Cr1-yMyO3, where 0.02?y?0.1 and M= Co, Cu, Ni, and V. Samples were studied with respect to sinterability in air, thermal expansion, conductivity in air and at low pO2, phase stability, and dilation under reducing atmospheres.

  13. Private Well Water and Fluoride

    MedlinePlus

    ... from my well has less than the recommended level of fluoride for preventing tooth decay? The recommended ... if the water from my well has fluoride levels that are higher than the recommended level for ...

  14. 40 CFR 721.10601 - Lanthanum lead titanium zirconium oxide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Lanthanum lead titanium zirconium... Specific Chemical Substances § 721.10601 Lanthanum lead titanium zirconium oxide. (a) Chemical substance... titanium zirconium oxide (PMN P-11-273; CAS No. 1227908-26-0) is subject to reporting under this...

  15. MOLTEN FLUORIDE NUCLEAR REACTOR FUEL

    DOEpatents

    Barton, C.J.; Grimes, W.R.

    1960-01-01

    Molten-salt reactor fuel compositions consisting of mixtures of fluoride salts are reported. In its broadest form, the composition contains an alkali fluoride such as sodium fluoride, zirconium tetrafluoride, and a uranium fluoride, the latter being the tetrafluoride or trifluoride or a mixture of the two. An outstanding property of these fuel compositions is a high coeffieient of thermal expansion which provides a negative temperature coefficient of reactivity in reactors in which they are used.

  16. Photoluminescence of cerium fluoride and cerium-doped lanthanum fluoride nanoparticles and investigation of energy transfer to photosensitizer molecules.

    PubMed

    Cooper, Daniel R; Kudinov, Konstantin; Tyagi, Pooja; Hill, Colin K; Bradforth, Stephen E; Nadeau, Jay L

    2014-06-28

    CexLa1-xF3 nanoparticles have been proposed for use in nanoscintillator-photosensitizer systems, where excitation of nanoparticles by ionizing radiation would result in energy transfer to photosensitizer molecules, effectively combining the effects of radiotherapy and photodynamic therapy. Thus far, there have been few experimental investigations of such systems. This study reports novel synthesis methods for water-dispersible Ce0.1La0.9F3/LaF3 and CeF3/LaF3 core/shell nanoparticles and an investigation of energy transfer to photosensitizers. Unbound deuteroporphyrin IX 2,4-disulfonic acid was found to substantially quench the luminescence of large (>10 nm diameter) aminocaproic acid-stabilized nanoparticles at reasonable concentrations and loading amounts: up to 80% quenching at 6% w/w photosensitizer loading. Energy transfer was found to occur primarily through a cascade, with excitation of "regular" site Ce(3+) at 252 nm relayed to photosensitizer molecules at the nanoparticle surface through intermediate "perturbed" Ce(3+) sites. Smaller (<5 nm) citrate-stabilized nanoparticles were coated with the bisphosphonate alendronate, allowing covalent conjugation to chlorin e6 and resulting in static quenching of the nanoparticle luminescence: ∼50% at ∼0.44% w/w. These results provide insight into energy transfer mechanisms that may prove valuable for optimizing similar systems. PMID:24827162

  17. Ferrimyoglobin-Fluoride.

    ERIC Educational Resources Information Center

    Russo, Steven O.; Hanania, George I. H.

    1990-01-01

    Described is an experiment which is designed to investigate the reaction of the protein ferrimyoglobin with fluoride. The activity uses readily available apparatus and the technique of optical absorbance for measurement of concentrations. Experimental design, procedures, and treatment of the equilibrium data are detailed. (CW)

  18. Other Fluoride Products

    MedlinePlus

    ... in preventing tooth decay in people of all ages. Use the information listed below to compare the other fluoride products ... even among children younger than 6 years of age. Proper application technique ... cleared for marketing by the Food and Drug Administration (FDA) as ...

  19. Fluorine (soluble fluoride)

    Integrated Risk Information System (IRIS)

    Fluorine ( soluble fluoride ) ; CASRN 7782 - 41 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for No

  20. Measurement of solubility of plutonium trifluoride and rare-earth fluorides in molten LiF-BeF{sub 2}-ZrF{sub 4}

    SciTech Connect

    Naumov, V.S.; Bychkov, A.V.; Kormilitsyn, M.V.

    1996-12-01

    Data on behavior of plutonium fluoride and fission products (FP) dissolved in fuel composition are needed to calculate the duration of an operating cycle of the ADTT facility (Accelerator-Driver Transmutation Technologies) and to determine the effect of their equilibrium concentrations on nuclear-physical characteristics of reactor operation. The data on the FP fluoride solubility in the molten salts are of great important for some industrial processes (electrolytical metal deposition, development of physical-chemical mean for processes of chemical technology, etc.) As noted above, some information on this question is given in monography and articles. Data concerning fluoride salts are given in reports. However, it was impossible to make the substantial analysis of mutual solubility of fluoride melts. The primary investigation of CeF{sub 3} and neodymium, samarium and lanthanum fluorides showed that the solubility of the melt LiF-BeF{sub 2} and LiF-BeF{sub 2}-ThF{sub 4} was a linear function of reverse temperature and increases from lanthanum to samarium in the row of rare-earth elements. Disagreement in estimation of plutonium trifluoride solubility and incomplete data on the solubility of rare-earth elements prompted this study.

  1. Thermal stability of lanthanum scandate dielectrics on Si(100)

    SciTech Connect

    Sivasubramani, P.; Lee, T. H.; Kim, M. J.; Kim, J.; Gnade, B. E.; Wallace, R. M.; Edge, L. F.; Schlom, D. G.; Stevie, F. A.; Garcia, R.; Zhu, Z.; Griffis, D. P.

    2006-12-11

    The authors have examined the thermal stability of amorphous, molecular beam deposited lanthanum scandate dielectric thin films on top of Si (100) after a 1000 deg. C, 10 s rapid thermal anneal. After the anneal, crystallization of LaScO{sub 3} is observed. Excellent suppression of lanthanum and scandium diffusion into the substrate silicon is indicated by the back-side secondary ion mass spectrometry (SIMS) analyses. In contrast, front-side SIMS and high-resolution electron energy loss analyses of the amorphous Si/LaScO{sub 3}/Si (100) stack indicated the outdiffusion of lanthanum and scandium into the silicon capping layer during the anneal.

  2. Health Effects Associated with Water Fluoridation.

    ERIC Educational Resources Information Center

    Richmond, Virginia L.

    1979-01-01

    Discussion is presented concerning fluoridation of water supplies. Correlation between fluoride in drinking water and improved dental health is reviewed. Relationship is expressed between fluoridation and reduced tooth decay. Use of fluoride in treating skeletal disorders is discussed. Author advocates fluoridating water supplies. (SA)

  3. Magnesium fluoride recovery method

    DOEpatents

    Gay, Richard L.; McKenzie, Donald E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag containing the same and having a radioactivity level of at least about 7000 pCi/gm. The slag is ground to a particle size of about 200 microns or less. The ground slag is contacted with an acid under certain prescribed conditions to produce a liquid product and a particulate solid product. The particulate solid product is separated from the liquid and treated at least two more times with acid to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 pCi/gm. In accordance with a particularly preferred embodiment of the invention a catalyst and an oxidizing agent are used during the acid treatment and preferably the acid is sulfuric acid having a strength of about 1.0 Normal.

  4. The energetics of lanthanum tantalate materials

    SciTech Connect

    Forbes, Tori Z.; Nyman, May; Rodriguez, Mark A.; Navrotsky, Alexandra

    2010-11-15

    Lanthanum tantalates are important refractory materials with application in photocatalysis, solid oxide fuel cells, and phosphors. Soft-chemical synthesis utilizing the Lindqvist ion, [Ta{sub 6}O{sub 19}]{sup 8-}, has yielded a new phase, La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}. Using the hydrated phase as a starting material, a new lanthanum orthotantalate polymorph was formed by heating to 850 {sup o}C, which converts to a previously reported LaTaO{sub 4} polymorph at 1200 {sup o}C. The stabilities of La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} (LaTa-OH), the intermediate LaTaO{sub 4} polymorph (LaTa-850), and the high temperature phase (LaTa-1200) were investigated using high-temperature oxide melt solution calorimetry. The enthalpy of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for LaTa-OH, LaTa-850, and LaTa-1200, respectively. These results indicate that the intermediate phase, LaTa-850, is the most stable. This pattern of energetics may be related to cation-cation repulsion of the tantalate cations. We also investigated possible LnTaO{sub 4} and Ln{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} analogues of Ln=Pr, Nd to examine the relationship between cation size and the resulting phases. - Graphical abstract: The energetics of three lanthanum tantalates were investigated by the high-temperature oxide melt solution calorimetry. The enthalpies of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}, LaTaO{sub 4} (850 {sup o}C), and LaTaO{sub 4} (1200 {sup o}C), respectively. These results indicate that the intermediate phase, LaTaO{sub 4} (850 {sup o}C), is the most stable in energy. Display Omitted

  5. Optical and Nuclear Spin Spectroscopy in PRASEODYMIUM(3+):LANTHANUM Fluoride by Optical Pumping

    NASA Astrophysics Data System (ADS)

    Wald, Lawrence Leroy

    A Stark Modulated Optical Pumping (SMOP) technique was used as a sensitive probe of optical hole-burning to study the effects of nuclear spin interactions in Pr ^{3+}:LaF_3. The results of two experiments are reported. In the first experiment, the SMOP technique is applied for optical detection of the NQR spectrum of the Pr^{3+} optical ground state. Frequency and linewidth variations of the Pr ^{3+} ground state hyperfine levels for different positions within the main ^3 H_4(Gamma1) -^1D_2(Gamma 1) inhomogeneous optical line and satellite transitions of Pr^{3+}:LaF _3 are observed. A linear increase in the broadening of the Pr^{3+} hyperfine transitions, without a shift of central frequency, is measured as the laser is tuned toward the wings of the inhomogeneous optical transition. The linear variation is attributed to electric quadrupole broadening caused by changes in local density of point defects across the Stark broadened optical transition. The optically detected NQR spectra of the satellite transitions associated with Pr ion pairs are shifted in frequency, and for most satellites are narrower in width than the NQR spectra found in the wings of the main inhomogeneous optical line. In the second experiment, direct evidence for the presence of a spin diffusion barrier or "frozen core" in Pr^{3+}:LaF _3 is observed by examining the cross relaxation between the Pr and F nuclei in a magnetic field chosen so that a pair of the optical ground state Pr^ {3+} hyperfine energy levels matches the F splitting or a multiple of the F splitting. This level crossing condition allows resonant flip-flop interactions with the nearest neighbor frozen core fluorine spins to re-populate Pr^{3+} hyperfine levels emptied by laser hole-burning, and is detected as enhanced absorption of the laser beam. The coupling of core fluorine spins to bulk fluorine spins during Pr-F cross-relaxation is measured by NMR of the bulk fluorine spin magnetization. The rate of cross relaxation between the Pr spins and the bulk F spins measured in this way is at least three to four orders of magnitude slower than that expected in the absence of a spin diffusion barrier. This reduction of coupling indicates nearly complete de-tuning of the frozen core F spins immediately surrounding the Pr^{3+} ion, cutting off resonant coupling with the bulk F spins.

  6. Spectroscopic and Relaxation Study of the Tritium -LABELLED-6 State in PRASEODYMIUM(3+):LANTHANUM-FLUORIDE.

    NASA Astrophysics Data System (ADS)

    Kichinski, Robert Thomas

    1988-12-01

    The relaxation behavior and hyperfine structure of the terminal ^3H_6 <=vel of the ^3P _0 - ^3H_6 transition (5985 A) in Pr^{3+ }:LaF_3 were studied using the excited state photon echo technique. The echo intensity was recorded as a function of pulse separation over nine decades of intensity. The echo signal decays exponentially with a T_2 of 250 nsec and Fourier analysis of the echo modulation yields the nuclear hyperfine splittings of the ^3 H_6<=vel. The fast decay is anomalous and remains so after examination of several possible explanations of this rate. We present stimulated echo data taken on the same transition which confirms the presence of a fast relaxation and indicates that it is due to a population decay out of the ^3 H_6 level. Temperature relaxation data is also presented.

  7. Lanthanum halide nanoparticle scintillators for nuclear radiation detection

    SciTech Connect

    Guss, Paul; Guise, Ronald; Yuan, Ding; Mukhopadhyay, Sanjoy; O'Brien, Robert; Lowe, Daniel; Kang, Zhitao; Menkara, Hisham; Nagarkar, Vivek V.

    2013-01-01

    Nanoparticles with sizes <10 nm were fabricated and characterized for their nanocomposite radiation detector properties. This work investigated the properties of several nanostructured radiation scintillators, in order to determine the viability of using scintillators employing nanostructured lanthanum tribromide, lanthanum trifluoride, or cerium tribromide. Preliminary results of this investigation are consistent with the idea that these materials have an intrinsic response to nuclear radiation that may be correlated to the energy of the incident radiation.

  8. Diminiode thermionic energy conversion with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Kroeger, E. W.; Bair, V. L.; Morris, J. F.

    1978-01-01

    Thermionic conversion data obtained from a variable gap cesium diminiode with a hot pressed, sintered lanthanum hexaboride emitter and an arc melted lanthanum hexaboride collector are presented. Performance curves cover a range of temperatures: emitter 1500 to 1700 K, collector 750 to 1000 K, and cesium reservoir 370 to 510 K. Calculated values of emitter and collector work functions and barrier index are also given.

  9. Diminiode thermionic energy conversion with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Kroeger, E. W.; Bair, V. L.; Morris, J. F.

    1978-01-01

    This paper presents thermionic-conversion data obtained from a variable-gap cesium diminiode with a hot-pressed, sintered lanthanum-hexaboride emitter and an arc-melted lanthanum-hexaboride collector. Performance curves cover a range of temperatures: emitter 1500 to 1700 K, collector 750 to 1000 K, and cesium reservoir 370 to 510 K. Calculated values of emitter and collector work functions and barrier index are also given.

  10. Phases in lanthanum-nickel-aluminum alloys

    SciTech Connect

    Mosley, W.C.

    1992-01-01

    Lanthanum-nickel-aluminum (LANA) alloys will be used to pump, store and separate hydrogen isotopes in the Replacement Tritium Facility (RTF). The aluminum content (y) of the primary LaNi{sub 5}-phase is controlled to produce the desired pressure-temperature behavior for adsorption and desorption of hydrogen. However, secondary phases cause decreased capacity and some may cause undesirable retention of tritium. Twenty-three alloys purchased from Ergenics, Inc. for development of RTF processes have been characterized by scanning electron microscopy (SEM) and by electron microprobe analysis (EMPA) to determine the distributions and compositions of constituent phases. This memorandum reports the results of these characterization studies. Knowledge of the structural characteristics of these alloys is a useful first step in selecting materials for specific process development tests and in interpreting results of those tests. Once this information is coupled with data on hydrogen plateau pressures, retention and capacity, secondary phase limits for RTF alloys can be specified.

  11. Laser glazing of lanthanum magnesium hexaaluminate

    NASA Astrophysics Data System (ADS)

    Zhang, Yanfei; Wang, Yaomin; Jarligo, Maria Ophelia; Zhong, Xinghua; Li, Qin; Cao, Xueqiang

    2008-08-01

    Lanthanum magnesium hexaalumminate (LMA) is an important candidate for thermal barrier coatings due to its thermal stability and low thermal conductivity. On the other hand, laser glazing method can potentially make thermal barrier coatings impermeable, resistant to corrosion on the surface and porous at bulk. LMA powder was synthesized at 1600 °C by solid-state reaction, pressed into tablet and laser glazed with a 5-kW continuous wave CO2 laser. Dendritic structures were observed on the surface of the laser-glazed specimen. The thicker the tablet, the easier the sample cracks. Cracking during laser glazing is attributed to the low thermal expansion coefficient and large thickness of the sample.

  12. Lanthanum sulfides as high temperature thermoelectric materials

    NASA Technical Reports Server (NTRS)

    Danielson, L. R.; Matsuda, S.; Raag, V.

    1984-01-01

    Thermoelectric property measurements have been made for the nonstoichiometric lanthanum sulfides, LaS(R) with R in the range 1.33-1.50. The Seebeck coefficients and electrical resistivities increase with temperature from 200 to 1100 C. Power factors (defined as Seebeck coefficient squared divided by electrical resistivity) generally increase both as the temperature is increased and as the compound composition is varied from LaS(1.48) to LaS(1.35). The power factor values combined with estimates of thermal conductivities for LaS(1.38) and LaS(1.4) yield figures of merit greater than 0.0005 at 1000 C.

  13. Electrical properties of lanthanum doped barium titanate ceramics

    SciTech Connect

    Vijatovic Petrovic, M.M.; Bobic, J.D.; Ramoska, T.; Banys, J.; Stojanovic, B.D.

    2011-10-15

    Pure and lanthanum doped barium titanate (BT) ceramics were prepared by sintering pellets at 1300 deg. C for 8 h, obtained from nanopowders synthesized by the polymeric precursor method. XRD results showed formation of a tetragonal structure. The presence of dopants changed the tetragonal structure to pseudo-cubic. The polygonal grain size was reduced up to 300 nm with addition of lanthanum as a donor dopant. Determined dielectric properties revealed that lanthanum modified BT ceramics possessed a diffused ferroelectric character in comparison with pure BT that is a classical ferroelectric material. In doped BT phase transition temperatures were shifted to lower temperatures and dielectric constant values were much higher than in pure BT. A modified Currie Weiss law was used to explore the connection between the doping level and degree of diffuseness of phase transitions. Impedance spectroscopy measurements were carried out at different temperatures in order to investigate electrical resistivity of materials and appearance of a PTCR effect. - Highlights: {yields} Pure and lanthanum doped BaTiO{sub 3} were prepared by polymeric precursors method. {yields} Change of structure from tetragonal to pseudo-cubic. {yields} Lanthanum as a donor dopant influenced on change of ferro-para phase transition. {yields} The diffuseness factor indicated the formation of diffuse ferroelectric material. {yields} Lanthanum affected on PTCR effect appearance in BT ceramics.

  14. Solubility products and thermodynamic functions for the lanthanon fluoride-water systems

    SciTech Connect

    Menon, M.P.

    1988-12-01

    The specific objectives of this research were: (1) to measure the solubilities, solubility products and thermodynamic functions for the dissolution of the fluorides of six lanthanons (lanthanum, praseodymium, neodymium, samarium, gadolinium and lutetium) using radiometric, conductometric and potentiometric techniques; (2) to measure the stability constants of the fluoride complexes of each of the above lanthanide ions using a simplified potentiometric technique; and (3) to establish the general trend in the solubilities and thermodynamic functions for the lanthanon fluoride-water systems. Experimental results indicate that the solubilities and pk/sub sp/ values of lanthanon trifluorides do not follow a pattern of gradual increase or decrease with the atomic number of lanthanons. The solubilities of all lanthanon trifluorides in buffered solutions of constant ionic strength (0.5 M) show a minimum at a pH between 3 and 4. Standard enthalpy and free energy changes for the dissolution of the fluorides in water are both positive, while the entropy changes, except for YbF/sub 3/, are negative. Although the stability constant for the monofluoride complexes can be measured with great precision those for difluoride complexes have considerable error in measurement. The report includes six tables and five graphics containing experimental results and trends. (CAF)

  15. Fluoride Content in Alcoholic Drinks.

    PubMed

    Goschorska, Marta; Gutowska, Izabela; Baranowska-Bosiacka, Irena; Rać, Monika Ewa; Chlubek, Dariusz

    2016-06-01

    The aim of the study was to determine the role of alcoholic drinks as a potential source of dietary fluoride by means of measuring fluoride levels in selected alcoholic drinks available on the Polish market that are also diverse in terms of the percentage content of ethanol. The study was conducted on 48 types of drinks with low, medium, and high alcohol content available on the Polish market and offered by various manufacturers, both Polish and foreign. Fluoride concentrations in individual samples were measured by potentiometric method with a fluoride ion-selective electrode. The highest fluoride levels were determined in the lowest percentage drinks (less than 10 % v/v ethanol), with the lowest fluoride levels observed in the highest percentage drinks (above 40 % v/v ethanol). In terms of types of alcoholic drinks, the highest fluoride levels were determined in beers and wines, while the lowest levels were observed in vodkas. These data confirm the fact that alcoholic beverages need to be considered as a significant source of fluoride delivered into the body. PMID:26475300

  16. WET FLUORIDE SEPARATION METHOD

    DOEpatents

    Seaborg, G.T.; Gofman, J.W.; Stoughton, R.W.

    1958-11-25

    The separation of U/sup 233/ from thorium, protactinium, and fission products present in neutron-irradiated thorium is accomplished by dissolving the irradiated materials in aqueous nitric acid, adding either a soluble fluoride, iodate, phosphate, or oxalate to precipltate the thorium, separating the precipltate from the solution, and then precipitating uranlum and protactinium by alkalizing the solution. The uranium and protactinium precipitate is removcd from the solution and dissolved in nitric acid. The uranyl nitrate may then be extracted from the acid solution by means of ether, and the protactinium recovered from the aqueous phase.

  17. Topical fluoride for caries prevention

    PubMed Central

    Weyant, Robert J.; Tracy, Sharon L.; Anselmo, Theresa (Tracy); Beltrán-Aguilar, Eugenio D.; Donly, Kevin J.; Frese, William A.; Hujoel, Philippe P.; Iafolla, Timothy; Kohn, William; Kumar, Jayanth; Levy, Steven M.; Tinanoff, Norman; Wright, J. Timothy; Zero, Domenick; Aravamudhan, Krishna; Frantsve-Hawley, Julie; Meyer, Daniel M.

    2015-01-01

    Background A panel of experts convened by the American Dental Association (ADA) Council on Scientific Affairs presents evidence-based clinical recommendations regarding professionally applied and prescription-strength, home-use topical fluoride agents for caries prevention. These recommendations are an update of the 2006 ADA recommendations regarding professionally applied topical fluoride and were developed by using a new process that includes conducting a systematic review of primary studies. Types of Studies Reviewed The authors conducted a search of MEDLINE and the Cochrane Library for clinical trials of professionally applied and prescription-strength topical fluoride agents—including mouthrinses, varnishes, gels, foams and pastes—with caries increment outcomes published in English through October 2012. Results The panel included 71 trials from 82 articles in its review and assessed the efficacy of various topical fluoride caries-preventive agents. The panel makes recommendations for further research. Practical Implications The panel recommends the following for people at risk of developing dental caries: 2.26 percent fluoride varnish or 1.23 percent fluoride (acidulated phosphate fluoride) gel, or a prescription-strength, home-use 0.5 percent fluoride gel or paste or 0.09 percent fluoride mouthrinse for patients 6 years or older. Only 2.26 percent fluoride varnish is recommended for children younger than 6 years. The strengths of the recommendations for the recommended products varied from “in favor” to “expert opinion for.” As part of the evidence-based approach to care, these clinical recommendations should be integrated with the practitioner's professional judgment and the patient's needs and preferences. PMID:24177407

  18. Urinary Fluoride Concentration in Children with Disabilities Following Long-Term Fluoride Tablet Ingestion

    ERIC Educational Resources Information Center

    Liu, Hsiu-Yueh; Chen, Jung-Ren; Hung, Hsin-Chia; Hsiao, Szu-Yu; Huang, Shun-Te; Chen, Hong-Sen

    2011-01-01

    Urine is the most commonly utilized biomarker for fluoride excretion in public health and epidemiological studies. Approximately 30-50% of fluoride is excreted from urine in children. Urinary fluoride excretion reflects the total fluoride intake from multiple sources. After administering fluoride tablets to children with disabilities, urinary…

  19. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  20. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  1. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  2. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  3. 49 CFR 173.163 - Hydrogen fluoride.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen fluoride. 173.163 Section 173.163... Hydrogen fluoride. (a) Hydrogen fluoride (hydrofluoric acid, anhydrous) must be packaged as follows: (1) In... filling ratio of 0.84. (b) A cylinder removed from hydrogen fluoride service must be condemned...

  4. Vapor-liquid equilibria for the systems difluoromethane + hydrogen fluoride, dichlorodifluoromethane + hydrogen fluoride, and chlorine + hydrogen fluoride

    SciTech Connect

    Kang, Y.W.

    1998-01-01

    Isothermal vapor-liquid equilibria for difluoromethane + hydrogen fluoride, dichlorodifluoromethane + hydrogen fluoride, and chlorine + hydrogen fluoride have been measured. The experimental data for the binary systems are correlated with the NRTL equation with the vapor-phase association model for the mixtures containing hydrogen fluoride, and the relevant parameters are presented. The binary system difluoromethane + hydrogen fluoride forms a homogeneous liquid phase, and the others form minimum boiling heterogeneous azeotropes at the experimental conditions.

  5. 40 CFR 721.10370 - Phosphonic acid, p-octyl-, lanthanum (3+) salt (2:1).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Phosphonic acid, p-octyl-, lanthanum... New Uses for Specific Chemical Substances § 721.10370 Phosphonic acid, p-octyl-, lanthanum (3+) salt... substance identified as phosphinic acid, p-octyl-, lanthanum (3+) salt (2:1) (PMN P-10-99; CAS No....

  6. 40 CFR 721.10370 - Phosphonic acid, p-octyl-, lanthanum (3+) salt (2:1).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Phosphonic acid, p-octyl-, lanthanum... New Uses for Specific Chemical Substances § 721.10370 Phosphonic acid, p-octyl-, lanthanum (3+) salt... substance identified as phosphinic acid, p-octyl-, lanthanum (3+) salt (2:1) (PMN P-10-99; CAS No....

  7. 40 CFR 721.10370 - Phosphonic acid, p-octyl-, lanthanum (3+) salt (2:1).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Phosphonic acid, p-octyl-, lanthanum... New Uses for Specific Chemical Substances § 721.10370 Phosphonic acid, p-octyl-, lanthanum (3+) salt... substance identified as phosphinic acid, p-octyl-, lanthanum (3+) salt (2:1) (PMN P-10-99; CAS No....

  8. Toward laser cooling of negative lanthanum

    NASA Astrophysics Data System (ADS)

    Jordan, Elena; Cerchiari, Giovanni; Erlewein, Stefan; Kellerbauer, Alban; UNIC Team

    2016-05-01

    Anion laser cooling holds the potential to allow the production of ultracold ensembles of any negatively charged species by sympathetic cooling. It is a promising technique for cooling of antiprotons to a few mK and could clear the way for precision measurements on cold antihydrogen. Laser cooling of negative ions has never been achieved, since most species have no bound-bound electric dipole transitions. Negative lanthanum (La-) is one of the few anions with multiple electric dipole transitions. The bound-bound transition from the 3F2e ground state to the 3D1o excited state in La- has been proposed theoretically as a candidate for laser cooling. The potential laser cooling transition was identified using laser photodetachment spectroscopy and its excitation energy was measured. We have studied the aforementioned transition in a beam of La anions by high-resolution laser photodetachment spectroscopy. Seven of the nine expected hyperfine structure transitions have been resolved and the transition cross sections have been estimated from experimental observations. It was found that presently La- is the most promising candidate among the atomic anions. We plan to demonstrate the first direct laser cooling of negative ions in a linear radio frequency trap. We gratefully acknowledge support from the European Research Council (ERC).

  9. Mechanical properties of lanthanum and yttrium chromites

    SciTech Connect

    Paulik, S.W.; Armstrong, T.R.

    1996-12-31

    In an operating high-temperature (1000{degrees}C) solid oxide fuel cell (SOFC), the interconnect separates the fuel (P(O{sub 2}){approx}10{sup -16} atm) and the oxidant (P(O2){approx}10{sup 0.2} atm), while being electrically conductive and connecting the cells in series. Such severe atmospheric and thermal demands greatly reduce the number of viable candidate materials. Only two materials, acceptor substituted lanthanum chromite and yttrium chromite, meet these severe requirements. In acceptor substituted chromites (Sr{sup 2+} or Ca{sup 2+} for La{sup 3+}), charge compensation is primarily electronic in oxidizing conditions (through the formation of Cr{sup 4+}). Under reducing conditions, ionic charge compensation becomes significant as the lattice becomes oxygen deficient. The formation of oxygen vacancies is accompanied by the reduction of Cr{sup 4+} ions to Cr{sup 3+} and a resultant lattice expansion. The lattice expansion observed in large chemical potential gradients is not desirable and has been found to result in greatly reduced mechanical strength.

  10. Phosphate adsorption on lanthanum loaded biochar.

    PubMed

    Wang, Zhanghong; Shen, Dekui; Shen, Fei; Li, Tianyu

    2016-05-01

    To attain a low-cost and high-efficient phosphate adsorbent, lanthanum (La) loaded biochar (La-BC) prepared by a chemical precipitation method was developed. La-BC and its pristine biochar (CK-BC) were comparatively characterized using zeta potential, BET surface area, scanning electron microscopy/energy dispersive spectrometer (SEM-EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The adsorption ability and the mechanisms during adsorption process for the La-BC samples were also investigated. La loaded on the surface of biochar can be termed as La-composites (such as LaOOH, LaONO3 and La(OH)3), leading to the decrease of negative charge and surface area of biochar. La-BC exhibited the high adsorption capacity to phosphate compared to CK-BC. Adsorption isotherm and adsorption kinetic studies showed that the Langmuir isotherm and second order model could well describe the adsorption process of La-BC, indicating that the adsorption was dominated by a homogeneous and chemical process. The calculated maximum adsorption capacity was as high as 46.37 mg g(-1) (computed in P). Thermodynamic analysis revealed that the adsorption was spontaneous and endothermic. SEM, XRD, XPS and FT-IR analysis suggested that the multi-adsorption mechanisms including precipitation, ligand exchange and complexation interactions can be evidenced during the phosphate adsorption process by La-composites in La-BC. PMID:26871732

  11. Large-area lanthanum hexaboride electron emitter

    SciTech Connect

    Goebel, D.M.; Hirooka, Y.; Sketchley, T.A.

    1985-09-01

    A large-area cathode assembly which is capable of continuous, high-current electron emission is described. The cathode utilizes an indirectly heated lanthanum hexaboride (LaB/sub 6/) disk as the thermionic electron emitter. The LaB/sub 6/ cathode emits over 600 A of electrons at an average of 20 A/cm/sup 2/ continuously with no observable lifetime limits to date after about 400 h of operation in a plasma discharge. Proper clasping of the LaB/sub 6/ disk is required to avoid impurity production from chemical reactions with the holder and to provide adequate support if the disk fractures during rapid thermal cycling. Modification of the LaB/sub 6/ surface composition due to preferential sputtering of boron by hydrogen and argon ions in the plasma discharge has been observed. The surface appearance is consistent with the formation of LaB/sub 4/ as a result of boron depletion. The electron emission capability of the cathode is not significantly altered by the surface change. This surface modification by preferential sputtering is not observed in hollow cathodes where the ion energy from the cathode sheath voltage is typically less than 50 V. The electron emission by the cathode has not been affected by exposure to both air and water during operation. Utilizing thick disks of this intermediate temperature cathode material results in reliable, high-current, long-lifetime electron emitter assemblies.

  12. Molten fluoride fuel salt chemistry

    SciTech Connect

    Toth, L.M.; Del Cul, G.D.; Dai, S.; Metcalf, D.H.

    1994-09-01

    The chemistry of molten fluorides is traced from their development as fuels in the Molten Salt Reactor Experiment with important factors in their selection being discussed. Key chemical characteristics such as solubility, redox behavior, and chemical activity are explained as they relate to the behavior of molten fluoride fuel systems. Fission product behavior is described along with processing experience. Development requirements for fitting the current state of the chemistry to modern nuclear fuel system are described. It is concluded that while much is known about molten fluoride behavior, processing and recycle of the fuel components is a necessary factor if future systems are to be established.

  13. Strontium-90 fluoride data sheet

    SciTech Connect

    Fullam, H.T.

    1981-06-01

    This report is a compilation of available data and appropriate literature references on the properties of strontium-90 fluoride and nonradioactive strontium fluoride. The objective of the document is to compile in a single source pertinent data to assist potential users in the development, licensing, and use of /sup 90/SrF/sub 2/-fueled radioisotope heat sources for terrestrial power conversion and thermal applications. The report is an update of the Strontium-90 Fluoride Data Sheet (BNWL-2284) originally issued in April 1977.

  14. Fluorination utilizing thermodynamically unstable fluorides and fluoride salts thereof

    DOEpatents

    Bartlett, Neil; Whalen, J. Marc; Chacon, Lisa

    2000-12-12

    A method for fluorinating a carbon compound or cationic carbon compound utilizes a fluorination agent selected from thermodynamically unstable nickel fluorides and salts thereof in liquid anhydrous hydrogen fluoride. The desired carbon compound or cationic organic compound to undergo fluorination is selected and reacted with the fluorination agent by contacting the selected organic or cationic organic compound and the chosen fluorination agent in a reaction vessel for a desired reaction time period at room temperature or less.

  15. Calcium and lanthanum solid base catalysts for transesterification

    DOEpatents

    Ng, K. Y. Simon; Yan, Shuli; Salley, Steven O.

    2015-07-28

    In one aspect, a heterogeneous catalyst comprises calcium hydroxide and lanthanum hydroxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In another aspect, a heterogeneous catalyst comprises a calcium compound and a lanthanum compound, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g, and a total basicity of about 13.6 mmol/g. In further another aspect, a heterogeneous catalyst comprises calcium oxide and lanthanum oxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In still another aspect, a process for preparing a catalyst comprises introducing a base precipitant, a neutral precipitant, and an acid precipitant to a solution comprising a first metal ion and a second metal ion to form a precipitate. The process further comprises calcining the precipitate to provide the catalyst.

  16. Thermoelectric properties of non-stoichiometric lanthanum sulfides

    NASA Technical Reports Server (NTRS)

    Shapiro, E.; Danielson, L. R.

    1983-01-01

    The lanthanum sulfides are promising candidate materials for high-efficiency thermoelectric applications at temperatures up to 1300 C. The non-stoichiometric lanthanum sulfides (LaS(x), where x is in the range 1.33-1.50) appear to possess the most favorable thermoelectric properties. The Seebeck coefficient and resistivity vary significantly with composition, so that an optimum value of alpha sq/rho (where alpha is the Seebeck coefficient and rho is the resistivity) can be chosen. The thermal conductivity remains approximately constant with stoichiometry, so a material with an optimum value of alpha sq/rho should possess the optimum figure-of-merit. Data for the Seebeck coefficient and electrical resistivity of non-stoichiometric lanthanum sulfides will be pressed, together with structural properties of these materials.

  17. Lanthanum Carbonate for Hyperphosphatemia in Patients on Peritoneal Dialysis

    PubMed Central

    Ohno, Michiya; Ohashi, Hiroshige; Oda, Hiroshi; Yokoyama, Haruko; Okada, Miho; Nagaya, Mayu; Izumi, Kumiko; Ito, Hitomi; Katoh, Shuji

    2013-01-01

    ♦ Background: The efficacy of the phosphate binder lanthanum carbonate has been demonstrated for hemodialysis patients, but no studies have focused on patients undergoing continuous ambulatory peritoneal dialysis (CAPD). We evaluated whether lanthanum carbonate could control phosphate levels in patients on CAPD. ♦ Methods: In this 48-week open-label prospective study, 28 patients on CAPD with a phosphate level of 6 mg/dL or greater were given lanthanum carbonate titrated from 750 mg to 2250 mg daily to achieve a target serum phosphate level of less than 6 mg/dL. The primary efficacy endpoint was reduction of serum phosphate to less than 6 mg/dL. Serum levels of calcium and parathyroid hormone were also evaluated, as were the Ca×P product and adverse effects. ♦ Results: From week 4 to the end of the study at week 48, we observed a significant reduction of serum phosphate to 5.25 ± 0.97 mg/dL from 6.88 ± 1.06 mg/dL at study start (p < 0.01). At the end of the study, 78.6% of participants had achieved the target of less than 6 mg/dL. Because no change of serum calcium occurred, the Ca×P product declined significantly during the study. Intact parathyroid hormone declined gradually over the study period, but the change had not reached significance at the end of the study (p = 0.11). The mean final dose of lanthanum carbonate was 946 mg daily. The only adverse effect reported was mild nausea in 1 patient. ♦ Conclusions: Lanthanum carbonate is an effective phosphate binder that can control serum phosphate and Ca×P product in CAPD patients with hyperphosphatemia. Lanthanum carbonate was well tolerated in our population. PMID:23209037

  18. Fluoride glass: Crystallization, surface tension

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.

    1988-01-01

    Fluoride glass was levitated acoustically in the ACES apparatus on STS-11, and the recovered sample had a different microstructure from samples cooled in a container. Further experiments on levitated samples of fluoride glass are proposed. These include nucleation, crystallization, melting observations, measurement of surface tension of molten glass, and observation of bubbles in the glass. Ground experiments are required on sample preparation, outgassing, and surface reactions. The results should help in the development and evaluation of containerless processing, especially of glass, in the development of a contaminent-free method of measuring surface tensions of melts, in extending knowledge of gas and bubble behavior in fluoride glasses, and in increasing insight into the processing and properties of fluoride glasses.

  19. Do Fluoride Ions Protect Teeth?

    ERIC Educational Resources Information Center

    Parkin, Christopher

    1998-01-01

    Begins with the procedure and results from an investigation on the effect of fluoride on the reaction between eggshell (substitute teeth) and dilute ethanoic acid. Describes an elegantly modified and improvised apparatus. (DDR)

  20. Enhancement of Superconductivity of Lanthanum and Yttrium Sesquicarbide

    DOEpatents

    Krupka, M. C.; Giorgi, A. L.; Krikorian, N. H.; Szklarz, E. G.

    1972-06-22

    A method of enhancing the superconductivity of body-centered cubic lanthanum and yttrium sesquicarbide through formation of the sesquicarbides from ternary alloys of novel composition (N/sub x/M/sub 1-x/)C/sub z/, where N is yttrium or lanthanum, M is thorium, any of the Group IV and VI transition metals, or gold, germanium or silicon, and z is approximately 1.2 to 1.6. These ternary sesquicarbides have superconducting transition temperatures as high as 17.0/sup 0/K.

  1. Enhancement of superconductivity of lanthanum and yttrium sesquicarbide

    DOEpatents

    Krupka, M.C.; Giorgi, A.L.; Krikorian, N.H.; Szklarz, E.G.

    1971-06-22

    A method of enhancing the superconductivity of body-centered cubic lanthanum and yttrium sesquicarbide through formation of the sesquicarbides from ternary alloys of novel composition (N/sub x/M/sub 1-x/)C/sub z/, where N is yttrium or lanthanum, M is thorium, any of the Group IV and VI transition metals, or gold, germanium or silicon, and z is approximately 1.2 to 1.6. These ternary sesquicarbides have superconducting transition temperatures as high as 17.0/sup 0/K.

  2. Effects of lanthanum in cellular systems. A review.

    PubMed

    Das, T; Sharma, A; Talukder, G

    1988-12-01

    Lanthanum belongs to the group of elements known as "lanthanons," which also includes cerium, europium, promethium, and thulium. It is the most electropositive element of the rare earth group, is uniformly trivalent, and is similar in its chemical properties to the alkaline earth elements. The effects of this element and its compounds on cellular systems are of considerable interest because of their increasing use in industry and as a substitute or antagonist for calcium in a variety of cellular reactions. Lanthanum is also being employed extensively in studying anatomical barriers, membrane structure, and subcellular transport systems, particularly the calcium pathway. PMID:2484565

  3. Synthesis and characterization of lanthanum doped zinc oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    Kumar, Vinod; Sonia, Suman, Kumar, Sacheen; Kumar, Dinesh

    2016-05-01

    La doped ZnO (Zn1-xLaxO, x = 0, 3, 6 and 9) were prepared via chemical co-precipitation method using Zinc Acetate, Lanthanum Acetate and Sodium Hydroxide at 50°C. Hydrate nanoparticles were annealed in air at 300°C for 3 hours. The synthesized samples have been characterized by powder X-ray diffraction and UV-Visiblespectrophotometer. The XRD measurement revealsthat the prepared nanoparticles have different microstructure without changing a hexagonal wurtzite structure. The result shows the change in nanoparticles size with the increment of lanthanum concentration for lower concentration for x = 0 to 6 and decreases at x = 9.

  4. SEPARATION OF PLUTONIUM FROM LANTHANUM BY CHELATION-EXTRACTION

    DOEpatents

    James, R.A.; Thompson, S.G.

    1958-12-01

    Plutonium can be separated from a mixture of plutonlum and lanthanum in which the lanthanum to plutonium molal ratio ls at least five by adding the ammonium salt of N-nitrosoarylhydroxylamine to an aqueous solution having a pH between about 3 and 0.2 and containing the plutonium in a valence state of at least +3, to form a plutonium chelate compound of N-nitrosoarylhydroxylamine. The plutonium chelate compound may be recovered from the solution by extracting with an immiscible organic solvent such as chloroform.

  5. Ab initio energetics of lanthanum substitution in ferroelectric bismuth titanate

    NASA Astrophysics Data System (ADS)

    Shah, S. H.; Bristowe, P. D.

    2011-04-01

    Using first principles calculations and atomistic thermodynamics the bulk and defect properties of orthorhombic bismuth titanate (Bi4Ti3O12) and bismuth lanthanum titanate (Bi3.25La0.75Ti3O12) have been investigated. Heats of formation, valid chemical conditions for synthesis, lanthanum substitution energies and oxygen and bismuth vacancy formation energies have been computed. The study improves our understanding of how native point defects and substitutional impurities influence the ferroelectric properties of these layered perovskite materials. It is found that lanthanum incorporation could occur on either of the two distinct bismuth sites in the structure and that the effect of substitution is to increase the formation energy of nearby native oxygen vacancies. The results provide direct atomistic evidence over a range of chemical conditions supporting the suggestion that lanthanum incorporation reduces the oxygen vacancy concentration. Oxygen vacancies contribute to ferroelectric fatigue by interacting strongly with domain walls, and therefore a decrease in their concentration is beneficial. The conditions that favor the greatest reduction in oxygen vacancy concentration are described.

  6. Discovery of cesium, lanthanum, praseodymium and promethium isotopes

    SciTech Connect

    May, E.; Thoennessen, M.

    2012-09-15

    Currently, forty-one cesium, thirty-five lanthanum, thirty-two praseodymium, and thirty-one promethium isotopes have been observed and the discovery of these isotopes is described here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

  7. Fluoride bioavailability in saliva and plaque

    PubMed Central

    2012-01-01

    Background Different fluoride formulations may have different effects on caries prevention. It was the aim of this clinical study to assess the fluoride content, provided by NaF compared to amine fluoride, in saliva and plaque. Methods Eight trained volunteers brushed their teeth in the morning for 3 minutes with either NaF or amine fluoride, and saliva and 3-day-plaque-regrowth was collected at 5 time intervals during 6 hours after tooth brushing. The amount of collected saliva and plaque was measured, and the fluoride content was analysed using a fluoride sensitive electrode. All subjects repeated all study cycles 5 times, and 3 cycles per subject underwent statistical analysis using the Wilcoxon-Mann-Whitney test. Results Immediately after brushing the fluoride concentration in saliva increased rapidly and dropped to the baseline level after 360 minutes. No difference was found between NaF and amine fluoride. All plaque fluoride levels were elevated after 30 minutes until 120 minutes after tooth brushing, and decreasing after 360 minutes to baseline. According to the highly individual profile of fluoride in saliva and plaque, both levels of bioavailability correlated for the first 30 minutes, and the fluoride content of saliva and plaque was back to baseline after 6 hours. Conclusions Fluoride levels in saliva and plaque are interindividually highly variable. However, no significant difference in bioavailability between NaF and amine fluoride, in saliva, or in plaque was found. PMID:22230722

  8. Structural Characterization of Methanol Substituted Lanthanum Halides

    PubMed Central

    Boyle, Timothy J.; Ottley, Leigh Anna M.; Alam, Todd M.; Rodriguez, Mark A.; Yang, Pin; Mcintyre, Sarah K.

    2010-01-01

    The first study into the alcohol solvation of lanthanum halide [LaX3] derivatives as a means to lower the processing temperature for the production of the LaBr3 scintillators was undertaken using methanol (MeOH). Initially the de-hydration of {[La(µ-Br)(H2O)7](Br)2}2 (1) was investigated through the simple room temperature dissolution of 1 in MeOH. The mixed solvate monomeric [La(H2O)7(MeOH)2](Br)3 (2) compound was isolated where the La metal center retains its original 9-coordination through the binding of two additional MeOH solvents but necessitates the transfer of the innersphere Br to the outersphere. In an attempt to in situ dry the reaction mixture of 1 in MeOH over CaH2, crystals of [Ca(MeOH)6](Br)2 (3) were isolated. Compound 1 dissolved in MeOH at reflux temperatures led to the isolation of an unusual arrangement identified as the salt derivative {[LaBr2.75•5.25(MeOH)]+0.25 [LaBr3.25•4.75(MeOH)]−0.25} (4). The fully substituted species was ultimately isolated through the dissolution of dried LaBr3 in MeOH forming the 8-coordinated [LaBr3(MeOH)5] (5) complex. It was determined that the concentration of the crystallization solution directed the structure isolated (4 concentrated; 5 dilute) The other LaX3 derivatives were isolated as [(MeOH)4(Cl)2La(µ-Cl)]2 (6) and [La(MeOH)9](I)3•MeOH (7). Beryllium Dome XRD analysis indicated that the bulk material for 5 appear to have multiple solvated species, 6 is consistent with the single crystal, and 7 was too broad to elucidate structural aspects. Multinuclear NMR (139La) indicated that these compounds do not retain their structure in MeOD. TGA/DTA data revealed that the de-solvation temperatures of the MeOH derivatives 4 – 6 were slightly higher in comparison to their hydrated counterparts. PMID:20514349

  9. Industrial fluoride pollution. Chronic fluoride poisoning in Cornwall Island cattle.

    PubMed

    Krook, L; Maylin, G A

    1979-04-01

    An aluminum plant on the south bank of the St. Lawrence river, southwest of Cornwall Island, Ontario, Canada, has emitted 0.816 metric tons of fluoride daily since 1973; considerably higher amounts were emitted from 1959 to 1973. The plant has been designated as the "major source of fluoride emissions impacting on Cornwall Island." Chronic fluoride poisoning in Cornwall island cattle was manifested clinically by stunted growth and dental fluorosis to a degree of severe interference with drinking and mastication. Cows died at or were slaughtered after the third pregnancy. The deterioration of cows did not allow further pregnancies. Fluoride concentrations in ash of biopsied coccygeal vertebrae increased significantly with age and were dependent on distance from and direction to the aluminum plant. Fluoride in bone ash of a 7-month old-fetus exceeded 500 ppm; fluoride thus was passed transplacentally. Analyses of fluoride in ash of bones obtained at necropsy of cattle from 4 months of age to 4 to 5 years of age showed increased amounts with age. Cancellous bone retained far higher amounts than cortical bone, a reflection of the normally higher metabolic rate of cancellous bone. Concentrations exceeding 10,000 ppm fluoride were recorded in cancellous bone of a 4-to 5-year-old cow. The target cells for fluoride in chronic fluorosis were shown to be the ameloblasts, the dental pulp cells and the odontoblasts and, in bone, primarily the resorbing osteocytes and also the osteoblasts. Atrophy and necrosis of the ameloblasts were responsible for enamel defects. The existing enamel showed brown discoloration from fluoride deposits. The pulp cells underwent fibrous and osseous metaplasia and necrosis of the ectopic bone occurred. The odontoblasts were atrophic and the dentin showed brown discoloration. The resorbing osteocytes were inactive and osteosclerosis resulted. This was especially pronounced in areas of normally great apposition, i.e. in the metaphyses. The epiphyseal

  10. Responses in sediment phosphorus and lanthanum concentrations and composition across 10 lakes following applications of lanthanum modified bentonite.

    PubMed

    Dithmer, Line; Nielsen, Ulla Gro; Lürling, Miquel; Spears, Bryan M; Yasseri, Said; Lundberg, Daniel; Moore, Alanna; Jensen, Nicholai D; Reitzel, Kasper

    2016-06-15

    A combined field and laboratory scale study of 10 European lakes treated between 2006 and 2013 with a lanthanum (La) modified bentonite (LMB) to control sediment phosphorus (P) release was conducted. The study followed the responses in sediment characteristics including La and P fractions and binding forms, P adsorption capacity of discrete sediment layers, and pore water P concentrations. Lanthanum phosphate mineral phases were confirmed by solid state (31)P MAS NMR and LIII EXAFS spectroscopy. Rhabdophane (LaPO4 · nH2O) was the major phase although indications of monazite (LaPO4) formation were also reported, in the earliest treated lake. Molar ratios between La and P in the sediments were generally above 1, demonstrating excess La relative to P. Lanthanum was vertically mixed in the sediment down to a depth of 10 cm for eight of the ten lakes, and recovery of La in excess of 100% of the theoretical aerial load indicated translocation of the LMB towards the deepest areas of the lakes. Lanthanum was generally recovered from bed sediment samples following sequential chemical extraction from the HCl fraction. Soluble reactive P (SRP) release experiments on intact sediment cores indicated conditions of P retention (with the exception of two lakes) by sediments, indicating effective control of sediment P release, i.e. between two and nine years after treatment. PMID:26971297

  11. Phosphate-binding efficacy of crushed vs. chewed lanthanum carbonate in hemodialysis patients.

    PubMed

    How, Priscilla P; Anattiwong, Prathana; Mason, Darius L; Arruda, Jose A; Lau, Alan H

    2011-01-01

    Lanthanum carbonate, a chewable noncalcium-containing phosphorus (P) binder, is useful for treating secondary hyperparathyroidism in patients who have hypercalcemia and cannot swallow whole tablets. However, some patients cannot chew tablets or prefer to crush and mix them with food. This study was conducted to determine the P-binding efficacy of crushed lanthanum and compare it with chewed lanthanum in hemodialysis (HD) patients. After a 1-week washout period, 11 hemodialysis patients (7 men, 4 women) were randomized to receive, in a crossover fashion, lanthanum 1000 mg 3 times daily chewed with meals and lanthanum 1000 mg 3 times daily crushed into a fine powder, mixed with applesauce and taken with meals, for 4 weeks each. Serum P was measured at the end of each washout (baseline) and weekly during treatment. Changes in serum P from baseline for crushed lanthanum were compared with chewed lanthanum using paired sample t test. Administration of crushed lanthanum resulted in a significant reduction in serum P from baseline (P reduction [mg/dL] for crushed lanthanum in week 1: 2.1 ± 0.4, week 2: 1.7 ± 0.5, week 3: 1.7 ± 0.5, week 4: 1.7 ± 0.4, P<0.05). No statistically significant differences were observed in serum P reduction from baseline and serum P attained during treatment with crushed when compared with chewed lanthanum. Crushed lanthanum is effective in reducing serum P and have similar P-binding efficacy to chewed lanthanum. Crushing lanthanum and mixing it with food can thus be an option for patients who are unable to chew or swallow whole tablets. PMID:21138519

  12. Microcratering in Polyvinylidene Fluoride

    NASA Astrophysics Data System (ADS)

    Shu, Anthony John

    Dust is defined as macroparticles as small as a few molecules up to several micrometers in diameter. In the context of space exploration, it was originally seen only as a technical obstacle to applications; dust can damage instrument surfaces, coat mating surfaces preventing proper seals, and impair or obstruct measurements. Because of the ubiquity of dust in the solar system and its role in the origin of planets and other bodies, the study of dust and related phenomena has evolved to a scientific subdiscipline which can provide us insight into the origins and evolution of our solar system. In order to facilitate this, a hypervelocity dust accelerator has been built at the University of Colorado at Boulder and is being used to probe impact phenomena, dust mitigation techniques, dust detection techniques, and more. One such dust detector is a Polyvinylidene Fluoride (PVDF) dust detector. The PVDF dust detector is very lightweight and consumes little power. Due to these properties, PVDF detectors can potentially be used on any spacecraft to gain information on the local dust environment. It is not fully understood how this PVDF dust detector signal is generated, so at present can only be used as a dust counter. In this thesis I discuss the importance of the study of dust phenomena, describe the accelerator experiment, and describe a study conducted to determine the underlying physical principles of PVDF dust detectors. This included measuring crater size scaling laws, measuring the detailed shape of craters, and applying this data to simulations of the signals being generated by PVDF detectors.

  13. A Manual for Rural School Fluoridation.

    ERIC Educational Resources Information Center

    Sprouse, Larman W.; Brooks, John

    The product of a 1972 Dental Health Branch contract with the U.S. Public Health Service, this manual is designed to aid in the development of school fluoridation programs and presents: background information on general concepts relating to the action of fluoride on teeth; discussions dealing with community and school fluoridation studies; and the…

  14. The Effect of Fluoride in Osteoporosis.

    ERIC Educational Resources Information Center

    Hedlund, L. R.; Gallagher, J. C.

    1987-01-01

    This article discusses the effect of fluoride on bone tissue and the possible role of fluoride in the treatment of osteoporosis. At present, fluoride treatment should be restricted to clinical trials until its risks and benefits have been further evaluated. (Author/MT)

  15. Fluoride uptake by Streptococcus mutans 6715.

    PubMed Central

    Whitford, G M; Schuster, G S; Pashley, D H; Venkateswarlu, P

    1977-01-01

    The short-term kinetics of fluoride uptake by cells from 20- to 22-h cultures of Streptococcus mutans strain 6715 were studied using rapid filtration and centrifugation techniques. Saline-suspended organisms were diluted with fluoride-containing solutions buffered at four different pH values (2.0, 4.0, 5.5, and 8.2). Fluoride disappearance from the medium was inversely related to pH and to the duration of the exposure at any given pH. The uptake was rapid and extensive at the lower pH values and decreased as the pH increased. Media fluoride concentrations subsequently increased; i.e., fluoride was released from the cells. The presence of glucose, cyanide, or iodoacetate did not influence the results. However, preincubation of the cells in fluoride-free buffers, followed by the addition of fluoride, reduced fluoride uptake markedly. Cell-to-media pH gradients were determined by the distribution of 14C-labeled 5,5-dimethyl-2,4-oxazolidinedione. Fluoride uptake was found to be a function of the magnitude of the pH gradient (P less than 0.001). It is hypothesized that fluoride uptake occurs by the diffusion of hydrogen fluoride and the subsequent trapping of ionic fluoride. PMID:22490

  16. Anhydrous hydrogen fluoride electrolyte battery. [Patent application

    DOEpatents

    Not Available

    1972-06-26

    It is an object of the invention to provide a primary cell or battery using ammonium fluoride--anhydrous hydrogen fluoride electrolyte having improved current and power production capabilities at low temperatures. It is operable at temperatures substantially above the boiling point of hydrogen fluoride. (GRA)

  17. METHOD OF PREPARING METAL FLUORIDES

    DOEpatents

    Katz, J.J.; Sheft, I.

    1959-08-11

    A method is presented for preparing the halides of elements which are relatively non-reactive with halogenating agents. The method involves reacting a mixture of an oxygen containing salt of a difficulty halogenated metal with an oxygen containing salt of an easily halogenated metal with a halogenating agent. Accordingly plutonium tetrafluoride is produced by reacting a mixture of plutonium dioxide and uranium octaoxide with bromine trifluoride. The reaction proceeds smoothly at moderate temperatures and the resulting plutonium trifluoride may be readily separated from many impurities which form volatile fluorides by volatilizing these volatile fluorides from the reaction chamber.

  18. A simple spectrophotometric assay for micromolar amounts of lanthanum in the presence of calcium and phosphate.

    PubMed

    Fernandez-Gavarron, F; Brand, J G; Rabinowitz, J L

    1987-10-01

    A sensitive spectrophotometric assay for micromolar amounts of lanthanum in the presence of calcium and phosphate (as hydroxyapatite) was developed utilizing the change in absorption (at 652 nm) when the dye arsenazo III was complexed with lanthanum. Arsenazo III was used at a level of 25 microM and the solution pH was maintained at 3.1 with 0.2 M sodium acetate. Lanthanum concentrations down to 0.5 microM could be reliably assayed. Calcium ion did not complex well with arsenazo III at pH 3.1. With calcium present at 100 microM and lanthanum at 10 microM, the assay was 115 times more sensitive for lanthanum. The assay is simple, rapid, reproducible and, unlike the assay using radioactive lanthanum, can be performed at any time. PMID:3455624

  19. Extensive lanthanum deposition in the gastric mucosa: the first histopathological report.

    PubMed

    Makino, Mutsuki; Kawaguchi, Kenji; Shimojo, Hisashi; Nakamura, Hironori; Nagasawa, Masaki; Kodama, Ryo

    2015-01-01

    Lanthanum carbonate is one of the new phosphate binders used for the treatment of hyperphosphatemia in patients with chronic kidney disease. It is poorly absorbed from the gastrointestinal tract, forms insoluble complexes within the lumen, and prevents the absorption of dietary phosphate. A 63-year-old female with a 7-year history of peritoneal dialysis, who was treated with lanthanum carbonate for four years, underwent endoscopic submucosal dissection for intramucosal gastric cancer. Resected specimens showed massive accumulation of macrophages containing fine, granular, brown material in the lamina propria. This was confirmed as lanthanum deposition by scanning electron microscopy with energy dispersive x-ray spectroscopy. Although lanthanum may be poorly absorbed, increased tissue accumulation of lanthanum, particularly in the liver and bone, has been reported in animals with chronic kidney disease. This report indicates enhanced gastrointestinal absorption of lanthanum in some patients or conditions, although its clinical significance awaits further studies. PMID:25413959

  20. Nanoscale assembly of lanthanum silica with dense and porous interfacial structures

    NASA Astrophysics Data System (ADS)

    Ballinger, Benjamin; Motuzas, Julius; Miller, Christopher R.; Smart, Simon; Diniz da Costa, João C.

    2015-02-01

    This work reports on the nanoscale assembly of hybrid lanthanum oxide and silica structures, which form patterns of interfacial dense and porous networks. It was found that increasing the molar ratio of lanthanum nitrate to tetraethyl orthosilicate (TEOS) in an acid catalysed sol-gel process alters the expected microporous metal oxide silica structure to a predominantly mesoporous structure above a critical lanthanum concentration. This change manifests itself by the formation of a lanthanum silicate phase, which results from the reaction of lanthanum oxide nanoparticles with the silica matrix. This process converts the microporous silica into the denser silicate phase. Above a lanthanum to silica ratio of 0.15, the combination of growth and microporous silica consumption results in the formation of nanoscale hybrid lanthanum oxides, with the inter-nano-domain spacing forming mesoporous volume. As the size of these nano-domains increases with concentration, so does the mesoporous volume. The absence of lanthanum hydroxide (La(OH)3) suggests the formation of La2O3 surrounded by lanthanum silicate.

  1. Nanoscale assembly of lanthanum silica with dense and porous interfacial structures

    PubMed Central

    Ballinger, Benjamin; Motuzas, Julius; Miller, Christopher R.; Smart, Simon; Diniz da Costa, João C.

    2015-01-01

    This work reports on the nanoscale assembly of hybrid lanthanum oxide and silica structures, which form patterns of interfacial dense and porous networks. It was found that increasing the molar ratio of lanthanum nitrate to tetraethyl orthosilicate (TEOS) in an acid catalysed sol-gel process alters the expected microporous metal oxide silica structure to a predominantly mesoporous structure above a critical lanthanum concentration. This change manifests itself by the formation of a lanthanum silicate phase, which results from the reaction of lanthanum oxide nanoparticles with the silica matrix. This process converts the microporous silica into the denser silicate phase. Above a lanthanum to silica ratio of 0.15, the combination of growth and microporous silica consumption results in the formation of nanoscale hybrid lanthanum oxides, with the inter-nano-domain spacing forming mesoporous volume. As the size of these nano-domains increases with concentration, so does the mesoporous volume. The absence of lanthanum hydroxide (La(OH)3) suggests the formation of La2O3 surrounded by lanthanum silicate. PMID:25644988

  2. Special Report: Fluoridation of Water.

    ERIC Educational Resources Information Center

    Hileman, Bette

    1988-01-01

    Reviews the controversy regarding water fluoridation in the United States during the last 50 years. Discusses the current status; benefits; and health risks including skeletal fluorosis, kidney disease, hypersensitivity, mutagenic effects, birth defects, and cancer. Presents statistics and anecdotal accounts. (CW)

  3. Spectral diversity crystalline fluoride lasers

    SciTech Connect

    Jenssen, H.P.; Gabbe, D.R.; Linz, A.; Naiman, C.S.

    1981-01-01

    Within the realm of crystalline laser materials, the class of fluorides distinguishes itself mostly by the wide variety of laser wavelengths displayed. Laser operation has now been reported from 3.9 micrometers in the infrared to 286 nm in the ultraviolet. Many are operated flash-lamp pumped, while others have shown high utility as linear down conversion lasers and rare earth ion, while others are sensitized by other co-dopants which absorb the pump energy and transfer it to the active laser ions. The potential of large spectral diversity for laser operation is due both to the wide window of transparency that fluorides possess and the lower rates of nonradiative decay. The high band gap in the ultraviolet also leads to low linear absorption, low nonlinear refractive indices and multiphoton absorption. Additionally, the good chemical stability displayed by high-purity stoichiometric fluoride compounds allows their use with ultraviolet pump sources at high energies, without incurring UV-induced damage. The most recent research associated with such materials, particularly the host crystal, lithium yttrium fluoride, LiYF4 (YLF) is reviewed.

  4. [Absorption of fluorides by synthetic hydroxyapatites].

    PubMed

    Yévenes, I; Sánchez, U; Medina, M E

    1988-01-01

    We studied the adsorption of sodium fluoride, ammonium fluoride, tin fluoride and sodium monofluorophosphate to synthetic hydroxiapatite in function of the pH (pH 4.7, 5.5 and 6.1). In two models; in a first model was eluted the fluorides of the hydroxiapatite column with artificial saliva; in the second model were incubated the fluoride with bufferized hydroxiapatite to the above pH. The fluoride determination was done by potentiometric method with a specific ion activity electrode. The results in the elution indicated that the sodium and tin fluorides give elution levels different at the pH studied. By other hand ammonium fluoride did not present differences. The results with incubation demonstrated that ammonium fluoride gives the greater adsorption, the sodium fluoride is slightly lower, and the sodium monofluorophosphate the lowest. Also, was observed that the adsorption decrease with the increase of the pH for the three fluorides. The comparison of both models showed that the incubation presented higher values of adsorption than the elution for the pH studied. PMID:3155417

  5. The role of fluoride in erosion therapy.

    PubMed

    Huysmans, Marie-Charlotte; Young, Alix; Ganss, Carolina

    2014-01-01

    The role of fluoride in erosion therapy has long been questioned. However, recent research has yielded positive results. In this chapter, an overview of the literature is provided regarding the application of fluorides in the prevention and treatment of erosion and erosive wear. The results are presented and discussed for different fluoride sources such as monovalent and polyvalent fluorides, and for different vehicles such as toothpastes, solutions and rinses, as well as varnishes and gels. It is concluded that fluoride applications are very likely to be of use in the preventive treatment of erosive wear. Most promising are high-concentration, acidic formulations and the polyvalent fluoride sources, with the best evidence available for stannous fluoride. However, the evidence base for clinical effectiveness is still small. PMID:24993271

  6. High temperature stability of lanthanum silicate dielectric on Si (001)

    SciTech Connect

    Jur, J. S.; Lichtenwalner, D. J.; Kingon, A. I.

    2007-03-05

    Integration of a high-{kappa} dielectric into complementary metal-oxide-semiconductor devices requires thermal stability of the amorphous dielectric phase and chemical compatibility with silicon. The stability of amorphous lanthanum silicate on Si (001) is investigated by means of metal-insulator-semiconductor capacitor measurements, back side secondary ion mass spectrometry (SIMS) depth profiling, and high-resolution transmission electron microscopy (HRTEM) after a 1000 deg. C, 10 s anneal in nitrogen ambient. Back side SIMS depth profiling of the TaN/LaSiO{sub x}/Si gate stack reveals no detectable lanthanum in the silicon substrate, and HRTEM shows stability of the amorphous LaSiO{sub x}. An effective work function near 4.0 eV is obtained for these gate stacks, making the stack design ideal for n-type metal-oxide-semiconductor device fabrication.

  7. Radiative lifetimes and transition probabilities of neutral lanthanum

    NASA Astrophysics Data System (ADS)

    Den Hartog, E. A.; Palmer, A. J.; Lawler, J. E.

    2015-08-01

    The radiative lifetimes of 72 odd-parity levels of neutral lanthanum are measured to ±5% accuracy using time-resolved laser-induced fluorescence on a slow atomic beam. The levels range in energy from 15031 to 32140 cm-1. Branching fraction measurements using Fourier-transform spectroscopy are attempted and completed for all of the 72 levels. The branching fractions, when combined with the radiative lifetimes, yield new transition probabilities for 315 lines of the first spectrum of lanthanum (La i ). This study is part of a larger body of work on the radiative properties of rare earth neutral atoms, and is motivated by research needs in lighting science and astrophysics.

  8. Lanthanum(III) catalysts for highly efficient and chemoselective transesterification.

    PubMed

    Hatano, Manabu; Ishihara, Kazuaki

    2013-03-11

    A facile, atom-economical, and chemoselective esterification is crucial in modern organic synthesis, particularly in the areas of pharmaceutical, polymer, and material science. However, a truly practical catalytic transesterification of carboxylic esters with various alcohols has not yet been well established, since, with many conventional catalysts, the substrates are limited to 1°- and cyclic 2°-alcohols. In sharp contrast, if we take advantage of the high catalytic activities of La(Oi-Pr)(3), La(OTf)(3), and La(NO(3))(3) as ligand-free catalysts, ligand-assisted or additive-enhanced lanthanum(III) catalysts can be highly effective acid-base combined catalysts in transesterification. A highly active dinuclear La(III) catalyst, which is prepared in situ from lanthanum(III) isopropoxide and 2-(2-methoxyethoxy)ethanol, is effective for the practical transesterification of methyl carboxylates, ethyl acetate, weakly reactive dimethyl carbonate, and much less-reactive methyl carbamates with 1°-, 2°-, and 3°-alcohols. As the second generation, nearly neutral "lanthanum(III) nitrate alkoxide", namely La(OR)(m)(NO(3))(3-m), has been developed. This catalyst is prepared in situ from inexpensive, stable, low-toxic lanthanum(III) nitrate hydrate and methyltrioctylphosphonium methyl carbonate, and is highly useful in the non-epimerized transesterification of α-substituted chiral carboxylic esters, even under azeotropic reflux conditions. In these practical La(III)-catalyzed transesterifications, colorless esters can be obtained in small- to large-scale synthesis without the need for inconvenient work-up or careful purification procedures. PMID:23325290

  9. Lanthanum halide nanoparticle scintillators for nuclear radiation detection

    SciTech Connect

    Guss, Paul; Guise, Ronald; O'Brien, Robert; Lowe, Daniel; Kang Zhitao; Menkara, Hisham; Nagarkar, Vivek V.

    2013-02-14

    Nanoparticles with sizes <10 nm were fabricated and characterized for their nanocomposite radiation detector properties. This work investigated the properties of several nanostructured radiation scintillators, in order to determine the viability of using scintillators employing nanostructured lanthanum trifluoride. Preliminary results of this investigation are consistent with the idea that these materials have an intrinsic response to nuclear radiation that may be correlated to the energy of the incident radiation.

  10. Fluoride in groundwater: toxicological exposure and remedies.

    PubMed

    Jha, S K; Singh, R K; Damodaran, T; Mishra, V K; Sharma, D K; Rai, Deepak

    2013-01-01

    Fluoride is a chemical element that is found most frequently in groundwater and has become one of the most important toxicological environmental hazards globally. The occurrence of fluoride in groundwater is due to weathering and leaching of fluoride-bearing minerals from rocks and sediments. Fluoride when ingested in small quantities (<0.5 mg/L) is beneficial in promoting dental health by reducing dental caries, whereas higher concentrations (>1.5 mg/L) may cause fluorosis. It is estimated that about 200 million people, from among 25 nations the world over, may suffer from fluorosis and the causes have been ascribed to fluoride contamination in groundwater including India. High fluoride occurrence in groundwaters is expected from sodium bicarbonate-type water, which is calcium deficient. The alkalinity of water also helps in mobilizing fluoride from fluorite (CaF2). Fluoride exposure in humans is related to (1) fluoride concentration in drinking water, (2) duration of consumption, and (3) climate of the area. In hotter climates where water consumption is greater, exposure doses of fluoride need to be modified based on mean fluoride intake. Various cost-effective and simple procedures for water defluoridation techniques are already known, but the benefits of such techniques have not reached the rural affected population due to limitations. Therefore, there is a need to develop workable strategies to provide fluoride-safe drinking water to rural communities. The study investigated the geochemistry and occurrence of fluoride and its contamination in groundwater, human exposure, various adverse health effects, and possible remedial measures from fluoride toxicity effects. PMID:23573940

  11. Alimentary fluoride intake in preschool children

    PubMed Central

    2011-01-01

    Background The knowledge of background alimentary fluoride intake in preschool children is of utmost importance for introducing optimal and safe caries preventive measures for both individuals and communities. The aim of this study was to assess the daily fluoride intake analyzing duplicate samples of food and beverages. An attempt was made to calculate the daily intake of fluoride from food and swallowed toothpaste. Methods Daily alimentary fluoride intake was measured in a group of 36 children with an average age of 4.75 years and an average weight of 20.69 kg at baseline, by means of a double plate method. This was repeated after six months. Parents recorded their child's diet over 24 hours and collected duplicated portions of food and beverages received by children during this period. Pooled samples of food and beverages were weighed and solid food samples were homogenized. Fluoride was quantitatively extracted from solid food samples by a microdiffusion method using hexadecyldisiloxane and perchloric acid. The content of fluoride extracted from solid food samples, as well as fluoride in beverages, was measured potentiometrically by means of a fluoride ion selective electrode. Results Average daily fluoride intake at baseline was 0.389 (SD 0.054) mg per day. Six months later it was 0.378 (SD 0.084) mg per day which represents 0.020 (SD 0.010) and 0.018 (SD 0.008) mg of fluoride respectively calculated per kg bw/day. When adding the values of unwanted fluoride intake from the toothpaste shown in the literature (0.17-1.21 mg per day) the estimate of the total daily intake of fluoride amounted to 0.554-1.594 mg/day and recalculated to the child's body weight to 0.027-0.077 mg/kg bw/day. Conclusions In the children studied, observed daily fluoride intake reached the threshold for safe fluoride intake. When adding the potential fluoride intake from swallowed toothpaste, alimentary intake reached the optimum range for daily fluoride intake. These results showed that

  12. Magnetoresistance of lanthanum manganites with activation-type conductivity

    SciTech Connect

    Kurkin, M. I. Neifeld, E. A.; Korolev, A. V.; Ugryumova, N. A.; Gudin, S. A.; Gapontseva, N. N.

    2013-05-15

    The temperature dependence of the resistivity and magnetic moment of La{sub 0.85}Ba{sub 0.15}MnO{sub 3} and La{sub 0.85}Sr{sub 0.15}MnO{sub 3} manganite single crystals in magnetic fields up to 90 kOe is investigated. Analysis of the experimental results shows that the magnetoresistance of lanthanum manganites far from the Curie temperature T{sub C} can be described quantitatively by the s-d model normally used for ferromagnets and taking into account only the exchange interaction between the spins of charge carriers and magnetic moments. These data also show that the features of lanthanum manganites responsible for colossal magnetoresistance (CMR) are manifested in a narrow temperature interval {delta}T Almost-Equal-To 20 K near T{sub C}. Our results suggest a CMR mechanism analogous to the mechanism of giant magnetoresistance (GMR) observed in Fe/Cr-type multilayers with nanometer layer thickness. The nanostratification observed in lanthanum manganites and required for GMR can be described taking into account the spread in T{sub C} in the CMR range {delta}T.

  13. Dynamics of Fluoride Bioavailability in the Biofilms of Different Oral Surfaces after Amine Fluoride and Sodium Fluoride Application.

    PubMed

    Naumova, Ella A; Dickten, Christoph; Jung, Rico; Krauss, Florian; Rübesamen, Henrik; Schmütsch, Katharina; Sandulescu, Tudor; Zimmer, Stefan; Arnold, Wolfgang H

    2016-01-01

    It was the aim of this study to investigate differences in fluoride bioavailability in different oral areas after the application of amine fluoride (AmF) and sodium fluoride (NaF). The null hypothesis suggested no differences in the fluoride bioavailability. The tongue coating was removed and biofilm samples from the palate, oral floor and cheeks were collected. All subjects brushed their teeth with toothpaste containing AmF or NaF. Specimens were collected before, as well as immediately after and at 30 and 120 minutes after tooth brushing. The fluoride concentration was determined. The area under the curve was calculated for each location and compared statistically. In the tongue coating, fluoride concentration increased faster after NaF application than after AmF application. After 30 minutes, the fluoride concentration decreased and remained stable until 120 minutes after AmF application and returned to baseline after NaF application. The difference between the baseline and the endpoint measurements was statistically significant. The fluoride concentration in the tongue coating remained at a higher level compared with the baseline for up to 120 minutes post-brushing. This may indicate that the tongue coating is a major reservoir for fluoride bioavailability. The results also indicate an unequal fluoride distribution in the oral cavity. PMID:26727989

  14. Dynamics of Fluoride Bioavailability in the Biofilms of Different Oral Surfaces after Amine Fluoride and Sodium Fluoride Application

    PubMed Central

    Naumova, Ella A.; Dickten, Christoph; Jung, Rico; Krauss, Florian; Rübesamen, Henrik; Schmütsch, Katharina; Sandulescu, Tudor; Zimmer, Stefan; Arnold, Wolfgang H.

    2016-01-01

    It was the aim of this study to investigate differences in fluoride bioavailability in different oral areas after the application of amine fluoride (AmF) and sodium fluoride (NaF). The null hypothesis suggested no differences in the fluoride bioavailability. The tongue coating was removed and biofilm samples from the palate, oral floor and cheeks were collected. All subjects brushed their teeth with toothpaste containing AmF or NaF. Specimens were collected before, as well as immediately after and at 30 and 120 minutes after tooth brushing. The fluoride concentration was determined. The area under the curve was calculated for each location and compared statistically. In the tongue coating, fluoride concentration increased faster after NaF application than after AmF application. After 30 minutes, the fluoride concentration decreased and remained stable until 120 minutes after AmF application and returned to baseline after NaF application. The difference between the baseline and the endpoint measurements was statistically significant. The fluoride concentration in the tongue coating remained at a higher level compared with the baseline for up to 120 minutes post-brushing. This may indicate that the tongue coating is a major reservoir for fluoride bioavailability. The results also indicate an unequal fluoride distribution in the oral cavity. PMID:26727989

  15. Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins

    PubMed Central

    Li, Sanshu; Smith, Kathryn D.; Davis, Jared H.; Gordon, Patricia B.; Breaker, Ronald R.; Strobel, Scott A.

    2013-01-01

    Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, 18F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions. PMID:24173035

  16. Eukaryotic resistance to fluoride toxicity mediated by a widespread family of fluoride export proteins.

    PubMed

    Li, Sanshu; Smith, Kathryn D; Davis, Jared H; Gordon, Patricia B; Breaker, Ronald R; Strobel, Scott A

    2013-11-19

    Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, (18)F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions. PMID:24173035

  17. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used... fluoride resins consist of basic resins produced by the polymerization of vinylidene fluoride. (b)...

  18. Silicon oxidation in fluoride solutions

    NASA Technical Reports Server (NTRS)

    Sancier, K. M.; Kapur, V.

    1980-01-01

    Silicon is produced in a NaF, Na2SiF6, and Na matrix when SiF4 is reduced by metallic sodium. Hydrogen is evolved during acid leaching to separate the silicon from the accompanying reaction products, NaF and Na2SiF6. The hydrogen evolution reaction was studied under conditions simulating leaching conditions by making suspensions of the dry silicon powder in aqueous fluoride solutions. The mechanism for the hydrogen evolution is discussed in terms of spontaneous oxidation of silicon resulting from the cooperative effects of (1) elemental sodium in the silicon that reacts with water to remove a protective silica layer, leaving clean reactive silicon, and (2) fluoride in solution that complexes with the oxidized silicon in solution and retards formation of a protective hydrous oxide gel.

  19. Systematic review of water fluoridation

    PubMed Central

    McDonagh, Marian S; Whiting, Penny F; Wilson, Paul M; Sutton, Alex J; Chestnutt, Ivor; Cooper, Jan; Misso, Kate; Bradley, Matthew; Treasure, Elizabeth; Kleijnen, Jos

    2000-01-01

    Objective To review the safety and efficacy of fluoridation of drinking water. Design Search of 25 electronic databases and world wide web. Relevant journals hand searched; further information requested from authors. Inclusion criteria were a predefined hierarchy of evidence and objectives. Study validity was assessed with checklists. Two reviewers independently screened sources, extracted data, and assessed validity. Main outcome measures Decayed, missing, and filled primary/permanent teeth. Proportion of children without caries. Measure of effect was the difference in change in prevalence of caries from baseline to final examination in fluoridated compared with control areas. For potential adverse effects, all outcomes reported were used. Results 214 studies were included. The quality of studies was low to moderate. Water fluoridation was associated with an increased proportion of children without caries and a reduction in the number of teeth affected by caries. The range (median) of mean differences in the proportion of children without caries was −5.0% to 64% (14.6%). The range (median) of mean change in decayed, missing, and filled primary/permanent teeth was 0.5 to 4.4 (2.25) teeth. A dose-dependent increase in dental fluorosis was found. At a fluoride level of 1 ppm an estimated 12.5% (95% confidence interval 7.0% to 21.5%) of exposed people would have fluorosis that they would find aesthetically concerning. Conclusions The evidence of a beneficial reduction in caries should be considered together with the increased prevalence of dental fluorosis. There was no clear evidence of other potential adverse effects. PMID:11021861

  20. Fluoride laser crystals: old and new

    NASA Astrophysics Data System (ADS)

    Jenssen, Hans P.; Cassanho, Arlete

    2006-02-01

    The development of oxide and fluoride materials as gain materials of choice for solid state lasers ranges from early materials such as Calcium Fluoride and Calcium Tungstate crystals to the now ubiquitous Nd hosts YLF, YAG and Vanadate. Among Tunable laser materials, MgF II - an early favorite, gave way to superior oxides such as Alexandrite and Ti:Sapphire only to be followed by development of still newer tunable fluoride media, notably, fluoride colquiriites such as Cr-doped LiSAF and LiCaF. Newer fluoride crystals, such as Barium Yttrium Fluoride BaY II F 8 (BYF), KY 3F 10 (KYF) and the tunable Cr doped LiCaGaF 6 are attractive laser materials, but their growth has not been optimized. Key advantages of two of these new crystals are discussed. Crystal growth results for BYF and Cr:LiCaGaF 6 as well as some material characterization are presented.

  1. Spectrophotometric determination of fluoride in fluoride-bearing minerals after decomposition by fusion with sodium hydroxide.

    PubMed

    Adelantado, J V; Martinez, V P; Moreno, A C; Reig, F B

    1985-03-01

    The decomposition of highly insoluble minerals (fluorspar and cryolite) by fusion with molten alkali-metal hydroxides is studied. The introduction of additives such as aluminium compounds or sodium peroxide to obtain total liberation of fluoride from calcium fluoride samples, is tested. The fusion is done in a silver crucible with a Bunsen burner. The cooled melt is easily soluble, giving solutions suitable for spectrophotometric fluoride determination by the Zr(IV)-fluoride-Erichrome Cyanine R method. PMID:18963832

  2. FLUORIDATION CHEMISTRY: EQUILIBRIA AND KINETICS OF FLUORIDE AND FLUORO-COMPLEXES

    EPA Science Inventory

    The most common fluoridating agents used by major American waterworks are hexafluorosilicic acid (H2SiF6) and sodium hexxafluorosilicate (Na2SiF6). According to the 1992 Water Fluoridation Census where 10,002 utilities responded affirmatively to fluoridating their water, 59
    % ...

  3. PRECIPITATION OF URANIUM PEROXIDE OF LOW FLUORIDE CONTENT FROM SOLUTIONS CONTAINING FLUORIDES

    DOEpatents

    King, E.J.; Clark, H.M.

    1958-08-12

    S>A method is described for the preparation of fluoride free uraniunn peroxide precipitates, even though the solution from which the precipitation is made is contaminated with fluorides. This is accomplished by add ing aluminum ions to the solution, where they complex any fluoride present and prevent its precipitation with the uramum peroxide.

  4. Phase I. Lanthanum-based Start Materials for Hydride Batteries

    SciTech Connect

    Gschneidner, K. A.; Schmidt, F. A.; Frerichs, A. E.; Ament, K. A.

    2013-08-20

    The purpose of Phase I of this work is to focus on developing a La-based start material for making nickel-metal (lanthanum)-hydride batteries based on our carbothermic-silicon process. The goal is to develop a protocol for the manufacture of (La1-xRx)(Ni1-yMy)(Siz), where R is a rare earth metal and M is a non-rare earth metal, to be utilized as the negative electrode in nickel-metal hydride (NiMH) rechargeable batteries.

  5. Fluoride coatings make effective lubricants in molten sodium environment

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Coating bearing surfaces with calcium fluoride-barium fluoride film provides effective lubrication against sliding friction in molten sodium and other severe environments at high and low temperatures.

  6. Fluorescent sensing of fluoride in cellular system.

    PubMed

    Jiao, Yang; Zhu, Baocun; Chen, Jihua; Duan, Xiaohong

    2015-01-01

    Fluoride ions have the important roles in a lot of physiological activities related with biological and medical system, such as water fluoridation, caries treatment, and bone disease treatment. Great efforts have been made to develop new methods and strategies for F(-) detection in the past decades. Traditional methods for the detection of F(-) including ion chromatography, ion-selective electrodes, and spectroscopic techniques have the limitations in the biomedicine research. The fluorescent probes for F(-) are very promising that overcome some drawbacks of traditional fluoride detection methods. These probes exhibit high selectivity, high sensitivity as well as quick response to the detection of fluoride anions. The review commences with a brief description of photophysical mechanisms for fluorescent probes for fluoride, including photo induced electron transfer (PET), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), and excited-state intramolecular proton transfer (ESIPT). Followed by a discussion about common dyes for fluorescent fluoride probes, such as anthracene, naphalimide, pyrene, BODIPY, fluorescein, rhodamine, resorufin, coumarin, cyanine, and near-infrared (NIR) dyes. We divide the fluorescent probes for fluoride in cellular application systems into nine groups, for example, type of hydrogen bonds, type of cleavage of Si-O bonds, type of Si-O bond cleavage and cylization reactions, etc. We also review the recent reported carriers in the delivery of fluorescent fluoride probes. Seventy-four typical fluorescent fluoride probes are listed and compared in detail, including quantum yield, reaction medium, excitation and emission wavelengths, linear detection range, selectivity for F(-), mechanism, and analytical applications. Finally, we discuss the future challenges of the application of fluorescent fluoride probes in cellular system and in vivo. We wish that more and more excellent fluorescent fluoride probes will be

  7. Fluoride in drinking water and dental fluorosis.

    PubMed

    Mandinic, Zoran; Curcic, Marijana; Antonijevic, Biljana; Carevic, Momir; Mandic, Jelena; Djukic-Cosic, Danijela; Lekic, Charles P

    2010-08-01

    In this study we determined the fluoride content in drinking water and hair of 12-year-old schoolchildren from different Serbian municipalities, i.e. Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja. The analyses were performed using composite fluoride ion-selective electrode. Average fluoride levels were 0.10, 0.15, 0.79 and 11 ppm in well water, 0.07, 0.10, 0.17 and 0.15 ppm in tap water, 19.3, 21.5, 25.4, and 32.5 ppm in hair samples, in Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja, respectively. Correlation analysis indicated statistically significant positive relationship between fluoride in wells water and fluoride in hair, for all municipalities: correlation coefficients were 0.54 (p < 0.05), 0.89, 0.97 and 0.99 (p < 0.001), in Vranjska Banja, Valjevo, Veliko Gradiste, and Kacarevo, respectively. Positive correlation was obtained also between fluoride in tap water and hair samples in all regions under the study, with statistical significance only in Valjevo municipality, p < 0.05. Dental examination of schoolchildren confirmed dental fluorosis only in the region of Vranjska Banja. Moreover, in endemic fluorotic region of Vranjska Banja, positive and statistically significant correlations were confirmed between fluoride in well water and dental fluorosis level (r = 0.61; p < 0.01) and additionally between fluoride in hair and dental fluorosis level (0.62; p < 0.01). The primary findings from this study have shown that fluoride content in hair is highly correlated with fluoride content in drinking water and dental fluorosis level, indicating that hair may be regarded as biomaterial of high informative potential in evaluating prolonged exposure to fluorides and to individuate children at risk of fluorosis regardless of the phase of teeth eruption. PMID:20580811

  8. Fluorescent Sensing of Fluoride in Cellular System

    PubMed Central

    Jiao, Yang; Zhu, Baocun; Chen, Jihua; Duan, Xiaohong

    2015-01-01

    Fluoride ions have the important roles in a lot of physiological activities related with biological and medical system, such as water fluoridation, caries treatment, and bone disease treatment. Great efforts have been made to develop new methods and strategies for F- detection in the past decades. Traditional methods for the detection of F- including ion chromatography, ion-selective electrodes, and spectroscopic techniques have the limitations in the biomedicine research. The fluorescent probes for F- are very promising that overcome some drawbacks of traditional fluoride detection methods. These probes exhibit high selectivity, high sensitivity as well as quick response to the detection of fluoride anions. The review commences with a brief description of photophysical mechanisms for fluorescent probes for fluoride, including photo induced electron transfer (PET), intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), and excited-state intramolecular proton transfer (ESIPT). Followed by a discussion about common dyes for fluorescent fluoride probes, such as anthracene, naphalimide, pyrene, BODIPY, fluorescein, rhodamine, resorufin, coumarin, cyanine, and near-infrared (NIR) dyes. We divide the fluorescent probes for fluoride in cellular application systems into nine groups, for example, type of hydrogen bonds, type of cleavage of Si-O bonds, type of Si-O bond cleavage and cylization reactions, etc. We also review the recent reported carriers in the delivery of fluorescent fluoride probes. Seventy-four typical fluorescent fluoride probes are listed and compared in detail, including quantum yield, reaction medium, excitation and emission wavelengths, linear detection range, selectivity for F-, mechanism, and analytical applications. Finally, we discuss the future challenges of the application of fluorescent fluoride probes in cellular system and in vivo. We wish that more and more excellent fluorescent fluoride probes will be developed

  9. Fluoride metabolism in Acacia georginae Gidyea

    PubMed Central

    Peters, R. A.; Murray, L. R.; Shorthouse, M.

    1965-01-01

    1. The metabolism of fluoride in seedlings and small plants of Acacia georginae has been studied with the idea of finding the conditions under which the plant makes fluoroacetate in the laboratory. 2. Individual seedlings vary in the extent to which they take up fluoride and convert it into a form other than inorganic which is here called `organic' fluoride, F(org.). The differences between the toxicity of A. georginae Gidyea trees may therefore be genetic in origin. 3. The uptake of fluoride from solutions 0·525–1·05mm (10–20p.p.m.) was not large. In 1–4 days it reached 8 p.p.m. in the aerial parts and 16 p.p.m. in the roots. Unlike the distribution of the halogen in grass, total fluoride was greater than inorganic fluoride. It was almost a rule that more `organic' fluoride was present in the roots than in the aerial parts. 4. With higher concentrations of fluoride 10·5–15·75mm (200–300p.p.m.) much larger amounts of fluoride were taken up, especially by the roots, and much more apparent organic fluoride was formed. 5. pH had a large influence upon the intake, this being lowest at an initial pH8·4 and highest at pH4·0. The pH outside this range was not investigated. Some observations have been made with a view to clarifying the biochemical paths for the synthesis of the C–F bond. 6. There is no evidence that chloride is an intermediary in synthesis. 7. Succinate is not accumulated in fluoride-stressed plants, suggesting that succinate dehydrogenase is not inhibited. 8. Enolase does not appear to be inhibited in vivo. PMID:14342508

  10. Fluoride concentration in dentin of exfoliated primary teeth as a biomarker for cumulative fluoride exposure.

    PubMed

    dela Cruz, G G; Rozier, R G; Bawden, J W

    2008-01-01

    A biomarker for lifetime fluoride exposure would facilitate population-based research and policy making but currently does not exist. This study examined the suitability of primary tooth dentin as a biomarker by comparing dentin fluoride concentration and fluoride exposures. Ninety-nine children's exfoliated primary teeth were collected from 2 fluoridated and 2 fluoride-deficient communities in North Carolina. Coronal dentin was isolated by microdissection and fluoride concentration assayed using the microdiffusion, ion-specific electrode technique. Information on children's fluoride exposures since birth from drinking water, toothpaste, supplements, rinses, food and beverages was collected by a self-reported questionnaire administered to caregivers. Only a small portion of the variance (10%) in incisor dentin fluoride (mean 792, SD 402 mg/kg) was accounted for by the best linear regression model as evaluated by the adjusted R(2). A moderate portion of the variance (60%) of molar dentin fluoride (mean 768, SD 489 mg/kg) was predicted by dietary fluoride supplement exposures, community of residence, and frequent tea consumption. Results for molars suggest that primary tooth dentin concentration may prove to be a satisfactory biomarker for fluoride exposure. PMID:18832828

  11. Fluoride Concentration in Dentin of Exfoliated Primary Teeth as a Biomarker for Cumulative Fluoride Exposure

    PubMed Central

    dela Cruz, G.G.; Rozier, R.G.; Bawden, J.W.

    2008-01-01

    A biomarker for lifetime fluoride exposure would facilitate population-based research and policy making but currently does not exist. This study examined the suitability of primary tooth dentin as a biomarker by comparing dentin fluoride concentration and fluoride exposures. Ninety-nine children's exfoliated primary teeth were collected from 2 fluoridated and 2 fluoride-deficient communities in North Carolina. Coronal dentin was isolated by microdissection and fluoride concentration assayed using the microdiffusion, ion-specific electrode technique. Information on children's fluoride exposures since birth from drinking water, toothpaste, supplements, rinses, food and beverages was collected by a self-reported questionnaire administered to caregivers. Only a small portion of the variance (10%) in incisor dentin fluoride (mean 792, SD 402 mg/kg) was accounted for by the best linear regression model as evaluated by the adjusted R2. A moderate portion of the variance (60%) of molar dentin fluoride (mean 768, SD 489 mg/kg) was predicted by dietary fluoride supplement exposures, community of residence, and frequent tea consumption. Results for molars suggest that primary tooth dentin concentration may prove to be a satisfactory biomarker for fluoride exposure. PMID:18832828

  12. Discovery of Interstellar Hydrogen Fluoride

    NASA Technical Reports Server (NTRS)

    Neufeld, David A.; Zmuidzinas, Jonas; Schilke, Peter; Phillips, Thomas G.

    1997-01-01

    We report the first detection of interstellar hydrogen fluoride. Using the Long Wavelength Spectrometer of the Infrared Space Observatory (ISO), we have detected the 121.6973 micron J = 2-1 line of HF in absorption toward the far-infrared continuum source Sagittarius B2. The detection is statistically significant at the 13 sigma level. On the basis of our model for the excitation of HF in Sgr B2, the observed line equivalent width of 1.0 nm implies a hydrogen fluoride abundance of about 3 x 10 (exp -10) relative to H, If the elemental abundance of fluorine in Sgr B2 is the same as that in the solar system, then HF accounts for about 2% of the total number of fluorine nuclei. We expect hydrogen fluoride to be the dominant reservoir of gas-phase fluorine in Sgr B2, because it is formed rapidly in exothermic reactions of atomic fluorine with either water or molecular hydrogen; thus, the measured HF abundance suggests a substantial depletion of fluorine onto dust grains. Similar conclusions regarding depletion have previously been reached for the case of chlorine in dense interstellar clouds. We also find evidence at a lower level of statistical significance (about 5 sigma) for an emission feature at the expected position of the 4(sub 32)-4(sub 23) 121.7219 micron line of water. The emission-line equivalent width of 0.5 mm for the water feature is consistent with the water abundance of 5 x 10(exp -6) relative to H, that has been inferred previously from observations of the hot core of Sgr B2.

  13. Discovery of Interstellar Hydrogen Fluoride

    NASA Technical Reports Server (NTRS)

    Neufeld, David A.; Zmuidzinas, Jonas; Schilke, Peter; Phillips, Thomas G.

    1997-01-01

    We report the first detection of interstellar hydrogen fluoride. Using the Long Wavelength Spectrometer of the Infrared Space Observatory (ISO), we have detected the 121.6973 micron J = 2-1 line of HF in absorption toward the far-infrared continuum source Sagittarius B2. The detection is statistically significant at the 13 sigma level. On the basis of our model for the excitation of HF in Sgr B2, the observed line equivalent width of 1.0 nm implies a hydrogen fluoride abundance of approximately 3 x 10(exp -10) relative to H2. If the elemental abundance of fluorine in Sgr B2 is the same as that in the solar system, then HF accounts for approximately 2% of the total number of fluorine nuclei. We expect hydrogen fluoride to be the dominant reservoir of gas-phase fluorine in Sgr B2, because it is formed rapidly in exothermic reactions of atomic fluorine with either water or molecular hydrogen; thus, the measured HF abundance suggests a substantial depletion of fluorine onto dust grains. Similar conclusions regarding depletion have previously been reached for the case of chlorine in dense interstellar clouds. We also find evidence at a lower level of statistical significance (approximately 5 sigma) for an emission feature at the expected position of the 4(sub 32)-4(sub 23) 121.7219 micron line of water. The emission-line equivalent width of 0.5 nm for the water feature is consistent with the water abundance of 5 x 10(exp -6) relative to H2 that has been inferred previously from observations of the hot core of Sgr B2.

  14. Welsh water should reinstate fluoridation on Anglesey.

    PubMed

    Hulse, G; Kenrick, A; Thomas, C H; Thomas, A; Davies, D J; Lennon, M A

    1995-01-21

    In 1992, Welsh Water withdrew the successful water fluoridation scheme on Anglesey. Despite evidence of the benefits of water fluoridation and the rise in number of children with tooth decay since the scheme's withdrawal, Welsh Water is still not prepared to re-establish the scheme. PMID:7848746

  15. Method of making porous ceramic fluoride

    DOEpatents

    Reiner, Robert H.; Holcombe, Cressie E.

    1990-01-01

    A process for making a porous ceramic composite where fumed silica particles are coated with a nitrate, preferably aluminum nitrate. Next the nitrate is converted to an oxide and formed into a desired configuration. This configuration is heated to convert the oxide to an oxide silicate which is then react with HF, resulting in the fluoride ceramic, preferably aluminum fluoride.

  16. Growth of hollow nickel fluoride whiskers

    SciTech Connect

    Petrov, S. V.; Orekhov, Yu. F.; Fedorov, P. P.

    2009-07-15

    Hollow nickel fluoride whiskers have been obtained by condensation from the vapor phase onto a platinum substrate in a flow of hydrogen fluoride. Crystals up to 5 mm in length have a square cross section with a 300 {+-} 30-{mu}m side. The wall thickness is 85 {+-} 20 {mu}m.

  17. Xenon fluoride solutions effective as fluorinating agents

    NASA Technical Reports Server (NTRS)

    Hyman, H. H.; Quarterman, L. A.; Sheft, I.

    1967-01-01

    Solutions of xenon fluorides in anhydrous hydrogen fluoride have few disruptive effects and leave a residue consisting of gaseous xenon, which can be recovered and refluorinated. This mild agent can be used with materials which normally must be fluorinated with fluorine alone at high temperatures.

  18. Novel borothermal route for the synthesis of lanthanum cerium hexaborides and their field emission properties

    SciTech Connect

    Menaka; Patra, Rajkumar; Ghosh, Santanu; Ganguli, Ashok K.

    2012-10-15

    The present study describes the development of a simple approach to stabilize polycrystalline lanthanum cerium hexaborides without using any flux and at ambient pressure. The nanostructured lanthanum-cerium borides were synthesized using hydroxide precursors. These precursors (La{sub 1-x}Ce{sub x}(OH){sub 3}, x=0.1, 0.2, 0.3 and 0.5) were synthesized via hydrothermal route in the presence of Tergitol (surfactant, nonylphenol ethoxylate) as a capping agent. The precursors on heating with boron at 1300 Degree-Sign C lead to the formation of nanostructures (cubes, rods and pyramids) of lanthanum cerium hexaboride. We have investigated the field emission behaviour of the hexaboride films fabricated by spin coating. It was observed that the pyramidal shaped nanostructures of La{sub 0.5}Ce{sub 0.5}B{sub 6} shows excellent field emission characteristics with high field enhancement factor of 4502. - Graphical abstract: Nanostructured lanthanum cerium hexaboride with efficient field emission have fabricated by low temperature hydroxide precursor mediated route. Highlights: Black-Right-Pointing-Pointer New methodology to prepare lanthanum cerium hexaboride at 1300 Degree-Sign C via borothermal route. Black-Right-Pointing-Pointer Nanostructured lanthanum cerium hexaboride film by spin coating process. Black-Right-Pointing-Pointer Nanopyramids based lanthanum cerium hexaboride shows excellent field emission.

  19. Photoelastic properties of magnesium fluoride

    SciTech Connect

    Chung, S.; Carleton, H.R.

    1980-05-01

    Magnesium fluoride (MgF/sub 2/) has the rutile crystal structure with a tetragonal space lattice (P4/mnm). The crystal is uniaxial positive with n/sub omega/ = 1.378 and n/sub epsilon/ = 1.390 for sodium D light. A single crystal of MgF/sub 2/ grown by the Materials Research Corporation was used in this study. The crystal was approximately 1 cm/sup 3/ with polished faces in the (001), (110), and (anti 110) crystal planes as verified by the back-reflection Laue method. Sample preparations and measurements are described.

  20. Thermodynamic data for uranium fluorides

    SciTech Connect

    Leitnaker, J.M.

    1983-03-01

    Self-consistent thermodynamic data have been tabulated for uranium fluorides between UF/sub 4/ and UF/sub 6/, including UF/sub 4/ (solid and gas), U/sub 4/F/sub 17/ (solid), U/sub 2/F/sub 9/ (solid), UF/sub 5/ (solid and gas), U/sub 2/F/sub 10/ (gas), and UF/sub 6/ (solid, liquid, and gas). Included are thermal function - the heat capacity, enthalpy, and free energy function, heats of formation, and vaporization behavior.

  1. Manufacture and properties of fluoride cement

    NASA Astrophysics Data System (ADS)

    Malata-Chirwa, Charles David

    This research work aimed at characterising composition, hydration and physical properties of fluoride cement, by studying samples of the cement obtained from Malawi, and comparing them to ordinary Portland cement. By confirming the suitable characteristics of fluoride cement through this work, the results of the research work provide a good basis for the wider adoption of fluoride cement as an alternative to ordinary Portland cement, especially in developing economies. Numerous accounts have been cited regarding the production and use of fluoride cement. Since there have not been conclusive agreement as to its properties, this study was limited to the theories of successful incorporation of fluoride compounds in the manufacture of fluoride cement. Hence, the properties and characteristics reported in this study relate to the cement currently manufactured in Malawi, and, on a comparative basis only, to that manufactured in other parts of the world. Samples of the fluoride cement used in the study were obtained by synthetic manufacture of the cement using common raw materials for the manufacture of fluoride cement that is limestone, silica sand, and fluorspar. These samples were subjected to several comparative tests used to characterise cements including examination under x-ray diffractometer, scanning electron microscopy and tests for setting time and compressive strength. Under similar laboratory conditions, it was possible to prove that fluoride cement hardens more rapidly than ordinary Portland cement. Also observed during the experimental work is that fluoride cement develops higher compressive strengths than ordinary Portland cement. The hardening and setting times are significantly different between the two cements. Also the nature of the hydration products, that is the microstructural development is significantly different in the two cements. The differences brought about between the two cements are because of the presence of fluorine during the clinkering

  2. MOCVD of very thin films of lead lanthanum titanate

    SciTech Connect

    Beach, D.B.; Vallet, C.E.

    1995-12-31

    Films of lead lanthanum titanate were deposited using metal-organic chemical vapor deposition (MOCVD) at temperatures between 500 and 550{degrees}C in a hot-wall reactor. The precursors used were Pb(THD){sub 2}, La(THD){sub 3}, and Ti(THD){sub 2}(I-OPr){sub 2} where THD = 2,2,6,6-tetramethyl-3,5-heptanedionate, O{sub 2}C{sub 11}H{sub 19}, and I-OPr = isopropoxide, OC{sub 3}H{sub 7}. The three precursors were delivered to the reactor using a single solution containing all three precursors dissolved in tetraglyme and the precursor solution was volatilized at 225{degrees}C. Films were deposited on Si and Si/Ti/Pt substrates, and characterized using Rutherford Backscattering Spectroscopy (RPS) and X-ray diffraction(XRD). Films deposited at 550{degrees}C had a composition which was close to that of the precursor solution while films deposited at 500{degrees}C were deficient in lanthanum. Even at 500{degrees}C, the desired perovskite phase showed an increase in the intensity of the X-ray lines, but did not change the width of these lines, implying the grain sizes had remained unchanged.

  3. Method of treating fluoride contaminated wastes

    SciTech Connect

    Davis, P.K.; Kakaria, V.K.

    1988-04-05

    A method for treating spent aluminum smelting potliner material containing fluoride contaminants is described which comprises: adding silica to the material to form a mixture thereof; elevating the temperature of the mixture within the range of 1,000/sup 0/ to 1,700/sup 0/C. to form a slag; providing sufficient silica in the mixture and forming the slag in the presence of sufficient water for pyrohydrolysis conditions resulting in the volatilization of substantially all of the fluoride contaminants mostly in the form of hydrogen fluoride; and cooling the slag remaining after volatilizatiion of substantially all of the fluoride contaminants to produce an insoluble silicate glass-residue containing any remaining portion of the fluoride contaminants in an immobile state.

  4. Recent advancements in fluoride: A systematic review

    PubMed Central

    Bansal, Ankita; Ingle, Navin Anand; Kaur, Navpreet; Ingle, Ekta

    2015-01-01

    To review advancements of fluoride in dentistry, a search of 21 electronic databases and World Wide Web was conducted. Relevant journals were hand searched and further information was requested from authors. Inclusion criteria were a predefined hierarchy of evidence and objectives. Study validity was assessed with checklists. Two reviewers independently screened sources, extracted data, and assessed validity. Fluoride has become an important tool in preventive dentistry. Current research is focused on the development of strategies to improve fluoride efficacy. Fluoride therapy in the form of varnish, gel, mouth rinse, or toothpaste has been used extensively as a caries-preventive intervention for over three decades. The purpose of this review is to inform the reader about new research related to the use of fluoride for the prevention of dental caries. PMID:26539383

  5. Lanthanum-hexaboride carbon composition for use in corrosive hydrogen-fluorine environments

    DOEpatents

    Holcombe, Cressie E.; Kovach, Louis; Taylor, Albert J.

    1981-01-01

    The present invention relates to a structural composition useful in corrosive hydrogen-fluorine environments at temperatures in excess of 1400.degree. K. The composition is formed of a isostatically pressed and sintered or a hot-pressed mixture of lanthanum hexaboride particles and about 10-30 vol. % carbon. The lanthanum-hexaboride reacts with the high-temperature fluorine-containing bases to form an adherent layer of corrosion-inhibiting lanthanum trifluoride on exposed surfaces of the composition. The carbon in the composite significantly strengthens the composite, enhances thermal shock resistance, and significantly facilitates the machining of the composition.

  6. Lanthanum-hexaboride carbon composition for use in corrosive hydrogen-fluorine environments

    DOEpatents

    Holcombe, C.E. Jr.; Kovach, L.; Taylor, A.J.

    1980-01-22

    The present invention relates to a structural composition useful in corrosive hydrogen-fluorine environments at temperatures in excess of 1400/sup 0/K. The composition is formed of a isostatically pressed and sintered or a hot-pressed mixture of lanthanum hexaboride particles and about 10 to 30 vol% carbon. The lanthanum-hexaboride reacts with the high-temperature fluorine-containing gases to form an adherent layer of corrosion-inhibiting lanthanum trifluoride on exposed surfaces of the composition. The carbon in the composite significantly strengthens the composite, enhances thermal shock resistance, and significantly facilitates the machining of the composition.

  7. The structure of trimethyltin fluoride.

    PubMed

    Chaudhary, Praveen; Bieringer, Mario; Hazendonk, Paul; Gerken, Michael

    2015-12-01

    The solid-state structure of (CH3)3SnF was reinvestigated by X-ray diffraction techniques as well as by multi-nuclear solid-state NMR spectroscopy. Trimethyltin fluoride crystallizes from hot ethanol in the orthorhombic space group Pnma at room temperature and changes to a low-temperature orthorhombic phase (space group: Cmcm) below -70 °C. In both modifications, trimethyltin fluoride adopts a linear chain structure with symmetric fluorine bridges, in contrast to previous reports. During its synthesis, (CH3)3SnF precipitates in another, poorly crystalline modification, as shown by powder X-ray diffraction. Solid-state MAS NMR experiments of both room-temperature phases of (CH3)3SnF (non-recrystallized and recrystallized) were carried out for the (1)H, (13)C, (19)F, and (119)Sn nuclei. The (119)Sn{(19)F, (1)H} and (19)F{(1)H} NMR spectra offer unambiguous determination for the (19)F and (119)Sn shielding tensors. The (119)Sn{(1)H} solid-state NMR spectra are in agreement with pentacoordination of Sn in this compound for the non-recrystallized and the recrystallized modifications. Based on the solid-state NMR results, the non-recrystallized modification of (CH3)3SnF also consists of linear, symmetrically fluorine-bridged chains, and differs from the recrystallized orthorhombic phase only in packing of the chains. PMID:26300008

  8. Dental fluorosis and skeletal fluoride content as biomarkers of excess fluoride exposure in marsupials.

    PubMed

    Death, Clare; Coulson, Graeme; Kierdorf, Uwe; Kierdorf, Horst; Morris, William K; Hufschmid, Jasmin

    2015-11-15

    Particulate and gaseous fluoride emissions contaminate vegetation near fluoride-emitting industries, potentially impacting herbivorous wildlife in neighboring areas. Dental fluorosis has been associated with consumption of fluoride-contaminated foliage by juvenile livestock and wildlife in Europe and North America. For the first time, we explored the epidemiology and comparative pathology of dental fluorosis in Australian marsupials residing near an aluminium smelter. Six species (Macropus giganteus, Macropus rufogriseus, Wallabia bicolor, Phascolarctos cinereus, Trichosurus vulpecula, Pseudocheirus peregrinus) demonstrated significantly higher bone fluoride levels in the high (n=161 individuals), compared to the low (n=67 individuals), fluoride areas (p<0.001). Necropsy examinations of all six species from the high-fluoride area near the smelter revealed dental lesions considered characteristic of dental fluorosis in eutherian mammals. Within the high-fluoride area, 67% of individuals across the six species showed dental enamel lesions, compared to 3% in the low-fluoride areas. Molars that erupted before weaning were significantly less likely to display pathological lesions than those developing later, and molars in the posterior portion of the dental arcade were more severely fluorotic than anterior molars in all six species. The severity of dental lesions was positively associated with increasing bone fluoride levels in all species, revealing a potential biomarker of excess fluoride exposure. PMID:26188404

  9. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  10. Fluoridation and Defluoridation. Training Module 2.230.2.77.

    ERIC Educational Resources Information Center

    McMullen, L. D.

    This document is an instructional module package prepared in objective form for use by an instructor familiar with fluoridation and fluoride feeding equipment. Enclosed are objectives, an instructor guide, student handouts and transparency masters. The module considers the principles and purposes of fluoridation, methods of feeding fluoride,…

  11. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  12. Fluoride Programs in the School Setting: Preventive Dental Health.

    ERIC Educational Resources Information Center

    Rebich, Theodore, Jr.; And Others

    1982-01-01

    Two types of school-based programs that increase students' use of fluoride for preventive dental health are described. In fluoride mouthrinse programs, teachers give their students a fluoride solution once a week in a paper cup. In areas where the level of fluoride in the water supply is insufficient, the flouride tablet program is used. (JN)

  13. 21 CFR 872.6870 - Disposable fluoride tray.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Disposable fluoride tray. 872.6870 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6870 Disposable fluoride tray. (a) Identification. A disposable fluoride tray is a device made of styrofoam intended to apply fluoride topically...

  14. Fluoride Plus Functionalized β-TCP

    PubMed Central

    Karlinsey, R.L.; Pfarrer, A.M.

    2012-01-01

    With more than 50 years of clinical success, fluoride serves as the gold standard agent for preventing tooth decay. In particular, the action of fluoride facilitates saliva-driven remineralization of demineralized enamel and alters solubility beneficially. Still, tooth decay remains problematic, and one way to address it may be through the development of new mineralizing agents. Laboratory and clinical studies have demonstrated that the combination of fluoride and functionalized β-tricalcium phosphate (fTCP) produces stronger, more acid-resistant mineral relative to fluoride, native β-TCP, or fTCP alone. In contrast to other calcium-based approaches that seem to rely on high levels of calcium and phosphate to drive remineralization, fTCP is a low-dose system designed to fit within existing topical fluoride preparations. The functionalization of β-TCP with organic and/or inorganic molecules provides a barrier that prevents premature fluoride-calcium interactions and aids in mineralization when applied via common preparations and procedures. While additional clinical studies are warranted, supplementing with fTCP to enhance fluoride-based nucleation activity, with subsequent remineralization driven by dietary and salivary calcium and phosphate, appears to be a promising approach. PMID:22899679

  15. Current status of fluoride volatility method development

    SciTech Connect

    Uhlir, J.; Marecek, M.; Skarohlid, J.

    2013-07-01

    The Fluoride Volatility Method is based on a separation process, which comes out from the specific property of uranium, neptunium and plutonium to form volatile hexafluorides whereas most of fission products (mainly lanthanides) and higher transplutonium elements (americium, curium) present in irradiated fuel form nonvolatile tri-fluorides. Fluoride Volatility Method itself is based on direct fluorination of the spent fuel, but before the fluorination step, the removal of cladding material and subsequent transformation of the fuel into a powdered form with a suitable grain size have to be done. The fluorination is made with fluorine gas in a flame fluorination reactor, where the volatile fluorides (mostly UF{sub 6}) are separated from the non-volatile ones (trivalent minor actinides and majority of fission products). The subsequent operations necessary for partitioning of volatile fluorides are the condensation and evaporation of volatile fluorides, the thermal decomposition of PuF{sub 6} and the finally distillation and sorption used for the purification of uranium product. The Fluoride Volatility Method is considered to be a promising advanced pyrochemical reprocessing technology, which can mainly be used for the reprocessing of oxide spent fuels coming from future GEN IV fast reactors.

  16. Deposition of fluoride on enamel surfaces released from varnishes is limited to vicinity of fluoridation site

    PubMed Central

    Lennon, A. M.; Yakin, M.; Becker, K.; Buchalla, W.; Attin, R.; Wiegand, A.

    2006-01-01

    The aim of the in-situ study was to determine fluoride uptake in non-fluoridated, demineralized enamel after application of fluoride varnishes on enamel samples located at various distances from the non-fluoridated samples. All enamel samples used were demineralized with acidic hydroxyethylcellulose before the experiment. Intra-oral appliances were worn by ten volunteers in three series: (1, Mirafluorid, 0.15% F; 2, Duraphat, 2.3% F and 3, unfluoridated controls) of 6 days each. Each two enamel samples were prepared from 30 bovine incisors. One sample was used for the determination of baseline fluoride content (BFC); the other was treated according to the respective series and fixed in the intra-oral appliance for 6 days. Additionally, from 120 incisors, each four enamel samples were prepared (one for BFC). Three samples (a–c) were placed into each appliance at different sites: (a) directly neighboured to the fluoridated specimen (=next), (b) at 1-cm distance (=1 cm) and (c) in the opposite buccal aspect of the appliance (=opposite). At these sites, new unfluoridated samples were placed at days 1, 3 and 5, which were left in place for 1 day. The volunteers brushed their teeth and the samples with fluoridated toothpaste twice per day. Both the KOH-soluble and structurally bound fluoride were determined in all samples to determine fluoride uptake and were statistically analyzed. One day, after fluoridation with Duraphat, KOH-soluble fluoride uptake in specimen a (=next) was significantly higher compared to the corresponding samples of both the control and Mirafluorid series, which in turn were not significantly different from each other. At all other sites and time points, fluoride uptake in the enamel samples were not different from controls for both fluoride varnishes. Within the first day after application, intra-oral-fluoride release from the tested fluoride varnish Duraphat leads to KOH-soluble fluoride uptake only in enamel samples located in close

  17. Morphology-controlled nonaqueous synthesis of anisotropic lanthanum hydroxide nanoparticles

    SciTech Connect

    Djerdj, Igor; Garnweitner, Georg; Sheng Su, Dang; Niederberger, Markus

    2007-07-15

    The preparation of lanthanum hydroxide and manganese oxide nanoparticles is presented, based on a nonaqueous sol-gel process involving the reaction of La(OiPr){sub 3} and KMnO{sub 4} with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. The lanthanum manganese oxide system is highly complex and surprising results with respect to product composition and morphology were obtained. In dependence of the reaction parameters, the La(OH){sub 3} nanoparticles undergo a shape transformation from short nanorods with an average aspect ratio of 2.1 to micron-sized nanofibers (average aspect ratio is more than 59.5). Although not directly involved, KMnO{sub 4} plays a crucial role in determining the particle morphology of La(OH){sub 3}. The reason lies in the fact that KMnO{sub 4} is able to oxidize the benzyl alcohol to benzoic acid, which presumably induces the anisotropic particle growth in [0 0 1] direction upon preferential coordination to the {+-}(1 0 0), {+-}(0 1 0) and {+-}(-110) crystal facets. By adjusting the molar La(OiPr){sub 3}-to-KMnO{sub 4} ratio as well as by using the appropriate solvent mixture it is possible to tailor the morphology, phase purity and microstructure of the La(OH){sub 3} nanoparticles. Postsynthetic thermal treatment of the sample containing La(OH){sub 3} nanofibers and {beta}-MnOOH nanoparticles at the temperature of 800 deg. C for 8 h yielded polyhedral LaMnO{sub 3} and worm-like La{sub 2}O{sub 3} nanoparticles as final products. - Graphical abstract: Lanthanum hydroxide nanoparticles are synthesized based on a nonaqueous sol-gel process involving the reaction of La(OiPr){sub 3} and KMnO{sub 4} with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. In dependence of the reaction parameters, the La(OH){sub 3} nanoparticles undergo a shape transformation from short nanorods to micron-sized nanofibers.

  18. Phase transformation, thermal expansion and electrical conductivity of lanthanum chromite

    SciTech Connect

    Gupta, Sapna; Mahapatra, Manoj K.; Singh, Prabhakar

    2013-09-01

    Graphical abstract: - Highlights: • Orthorhombic and rhombohedral phases co-exist at ≥260 °C and cubic above 1000 °C. • Polymorphic changes with temperature in air and Ar–3%H{sub 2} are observed. • Lattice volume change in Ar–3%H{sub 2} atmosphere corresponds to Cr{sup 4+} → Cr{sup 3+} transition. • Change in valence state of Cr{sup 4+} to Cr{sup 3+} results in lower electrical conductivity. • Experimental evidence is provided for poor densification of LaCrO{sub 3} in air. - Abstract: This paper addresses discrepancies pertaining to structural, thermal and electrical properties of lanthanum chromite. Experimental evidence is provided to support the hypothesis for poor densification in air as well as reduction in electrical conductivity in reducing atmosphere. Sintering condition for the synthesis of LaCrO{sub 3} was optimized to 1450 °C and 10 h. Thermo-analytical (differential scanning calorimetry – DSC) and high temperature X-ray diffraction (HT-XRD) studies show that orthorhombic lanthanum chromite transforms into rhombohedral structure at ∼260 °C and cubic structure above 1000 °C. Co-existence of the structural phases and the variation in each polymorph with temperature in both air and 3%H{sub 2}–Ar atmosphere is reported. Presence and absence of Cr-rich phase at inter-particle neck are observed in oxidizing and reducing atmospheres respectively. The linear thermal expansion co-efficient was calculated to be 10.8 ± 0.2 × 10{sup −6} °C{sup −1} in the temperature range of RT–1400 °C. Electrical conductivity of lanthanum chromite was found to be 0.11 S/cm in air. A decrease in electrical conductivity (0.02 S/cm at 800 °C) of LaCrO{sub 3}, as observed in reducing atmosphere (3%H{sub 2}–Ar), corresponds to lattice volume change as indicated by peak shift in HT-XRD results.

  19. Physiologic Conditions Affect Toxicity of Ingested Industrial Fluoride

    PubMed Central

    Sauerheber, Richard

    2013-01-01

    The effects of calcium ion and broad pH ranges on free fluoride ion aqueous concentrations were measured directly and computed theoretically. Solubility calculations indicate that blood fluoride concentrations that occur in lethal poisonings would decrease calcium below prevailing levels. Acute lethal poisoning and also many of the chronic effects of fluoride involve alterations in the chemical activity of calcium by the fluoride ion. Natural calcium fluoride with low solubility and toxicity from ingestion is distinct from fully soluble toxic industrial fluorides. The toxicity of fluoride is determined by environmental conditions and the positive cations present. At a pH typical of gastric juice, fluoride is largely protonated as hydrofluoric acid HF. Industrial fluoride ingested from treated water enters saliva at levels too low to affect dental caries. Blood levels during lifelong consumption can harm heart, bone, brain, and even developing teeth enamel. The widespread policy known as water fluoridation is discussed in light of these findings. PMID:23840230

  20. Effect of Adsorbed Nitrogen on the Thermionic Emission from Lanthanum Hexaboride

    NASA Technical Reports Server (NTRS)

    Carter, Arlen F.; Wood, George P.

    1959-01-01

    The emission properties of lanthanum hexaboride in an atmosphere of nitrogen were investigated. The emitter was not poisoned by adsorbed nitrogen. This result should have application to magnetohydrodynamic devices in which electron flow from channel walls is required.

  1. METAL INTERACTIONS AT SULFIDE MINERAL SURFACES. PART 2. ADSORPTION AND DESORPTION OF LANTHANUM

    EPA Science Inventory

    Batch-type adsorption experiments with four sulfide minerals (chalcocite, galena, pyrite, and sphalerite) were used to investigate the adsorption and desorption behavior of lanthanum (III) in the presence of ethylenediaminetetraacetic acid (EDTA), a model humic substance. Linear ...

  2. PROCESS FOR TREATING VOLATILE METAL FLUORIDES

    DOEpatents

    Rudge, A.J.; Lowe, A.J.

    1957-10-01

    This patent relates to the purification of uranium hexafluoride, made by reacting the metal or its tetrafluoride with fluorine, from the frequently contained traces of hydrofluoric acid. According to the present process, UF/sub 6/ containing as an impurity a small amount of hydrofluoric acid, is treated to remove such impurity by contact with an anhydrous alkali metal fluoride such as sodium fluoride. In this way a non-volatile complex containing hydrofluoric acid and the alkali metal fluoride is formed, and the volatile UF /sub 6/ may then be removed by distillation.

  3. REDUCTION OF FLUORIDE TO METAL

    DOEpatents

    Carlson, O.N.; Schmidt, F.A.; Spedding, F.H.

    1960-08-30

    A process is given for making yttrium metal by reducing yttrium fluoride with calcium plus magnesium. Calcium is added in an excess of from 10 to 20% and magnesium in a quantity to yield a magnesium--yttrium alloy containing from 12 to 25% magnesium when the reaction mass is heated in an inert atmosphere at from 900 to 1106 deg C, but preferably above the melting point of the alloy. Calcium chloride may be added so as to obtain a less viscous slag containing from 30 to 60% calcium chloride. After removal of the slag the alloy is vacuum-heated at about 1100 deg C for volatilization of the magnesium and calcium.

  4. Cobalt doped lanthanum chromite material suitable for high temperature use

    DOEpatents

    Ruka, R.J.

    1986-12-23

    A high temperature, solid electrolyte electrochemical cell, subject to thermal cycling temperatures of between about 25 C and about 1,200 C, capable of electronic interconnection to at least one other electrochemical cell and capable of operating in an environment containing oxygen and a fuel, is made; where the cell has a first and second electrode with solid electrolyte between them, where an improved interconnect material is applied along a portion of a supporting electrode; where the interconnect is made of a chemically modified lanthanum chromite, containing cobalt as the important additive, which interconnect allows for adjustment of the thermal expansion of the interconnect material to more nearly match that of other cell components, such as zirconia electrolyte, and is stable in oxygen containing atmospheres such as air and in fuel environments. 2 figs.

  5. Cobalt doped lanthanum chromite material suitable for high temperature use

    DOEpatents

    Ruka, Roswell J.

    1986-01-01

    A high temperature, solid electrolyte electrochemical cell, subject to thermal cycling temperatures of between about 25.degree. C. and about 1200.degree. C., capable of electronic interconnection to at least one other electrochemical cell and capable of operating in an environment containing oxygen and a fuel, is made; where the cell has a first and second electrode with solid electrolyte between them, where an improved interconnect material is applied along a portion of a supporting electrode; where the interconnect is made of a chemically modified lanthanum chromite, containing cobalt as the important additive, which interconnect allows for adjustment of the thermal expansion of the interconnect material to more nearly match that of other cell components, such as zirconia electrolyte, and is stable in oxygen containing atmospheres such as air and in fuel environments.

  6. Recent advances of lanthanum-based perovskite oxides for catalysis

    SciTech Connect

    Zhu, Huiyuan; Zhang, Pengfei; Dai, Sheng

    2015-09-21

    There is a need to reduce the use of noble metal elements especially in the field of catalysis, where noble metals are ubiquitously applied. To this end, perovskite oxides, an important class of mixed oxide, have been attracting increasing attention for decades as potential replacements. Benefiting from the extraordinary tunability of their compositions and structures, perovskite oxides can be rationally tailored and equipped with targeted physical and chemical properties e.g. redox behavior, oxygen mobility, and ion conductivity for enhanced catalysis. Recently, the development of highly efficient perovskite oxide catalysts has been extensively studied. This review article summarizes the recent development of lanthanum-based perovskite oxides as advanced catalysts for both energy conversion applications and traditional heterogeneous reactions.

  7. Recent advances of lanthanum-based perovskite oxides for catalysis

    DOE PAGESBeta

    Zhu, Huiyuan; Zhang, Pengfei; Dai, Sheng

    2015-09-21

    There is a need to reduce the use of noble metal elements especially in the field of catalysis, where noble metals are ubiquitously applied. To this end, perovskite oxides, an important class of mixed oxide, have been attracting increasing attention for decades as potential replacements. Benefiting from the extraordinary tunability of their compositions and structures, perovskite oxides can be rationally tailored and equipped with targeted physical and chemical properties e.g. redox behavior, oxygen mobility, and ion conductivity for enhanced catalysis. Recently, the development of highly efficient perovskite oxide catalysts has been extensively studied. This review article summarizes the recent developmentmore » of lanthanum-based perovskite oxides as advanced catalysts for both energy conversion applications and traditional heterogeneous reactions.« less

  8. Timing resolution measurements of a 3 in. lanthanum bromide detector

    NASA Astrophysics Data System (ADS)

    Galli, L.; De Gerone, M.; Dussoni, S.; Nicolò, D.; Papa, A.; Tenchini, F.; Signorelli, G.

    2013-08-01

    Cerium-doped lanthanum bromide (LaBr3:Ce) is a scintillator that presents very good energy and timing resolutions and it is a perfect candidate for photon detector in future experiments to search for lepton flavor violation as in μ → eγ or μ → e conversion. While energy resolution was thoroughly investigated, timing resolution at several MeV presents some experimental challenge. We measured the timing resolution of a 3 in.×3 in. cylindrical LaBr3(Ce) crystal versus few reference detectors by means of a nuclear reaction from a Cockcroft-Walton accelerator that produces coincident γ-rays in the 4.4-11.6 MeV range. Preliminary results allow us to extrapolate the properties of a segmented γ-ray detector in the 50-100 MeV range.

  9. Deposition and investigation of lanthanum cerium hexaboride thin films

    NASA Astrophysics Data System (ADS)

    Kuzanyan, A. S.; Harutyunyan, S. R.; Vardanyan, V. O.; Badalyan, G. R.; Petrosyan, V. A.; Kuzanyan, V. S.; Petrosyan, S. I.; Karapetyan, V. E.; Wood, K. S.; Wu, H.-D.; Gulian, A. M.

    2006-09-01

    Thin films of lanthanum-cerium hexaboride, the promising thermoelectric material for low-temperature applications, are deposited on various substrates by the electron-beam evaporation, pulsed laser deposition and magnetron sputtering. The influence of the deposition conditions on the films X-ray characteristics, composition, microstructure and physical properties, such as the resistivity and Seebeck coefficient, is studied. The preferred (100) orientation of all films is obtained from XRD traces. In the range of 780-800 °C deposition temperature the highest intensity of diffractions peaks and the highest degree of the preferred orientation are observed. The temperature dependence of the resistivity and the Seebeck coefficient of films are investigated in the temperature range of 4-300 K. The features appropriate to Kondo effect in the dependences ρ( T) and S( T) are detected at temperatures below 20 K. Interplay between the value of the Seebeck coefficient, metallic parameters and Kondo scattering of investigated films is discussed.

  10. Phases in lanthanum-nickel-aluminum alloys. Part 2

    SciTech Connect

    Mosley, W.C.

    1992-08-01

    Lanthanum-nickel-aluminum (LANA) alloys will be used to pump, store and separate hydrogen isotopes in the Replacement Tritium Facility (RTF). The aluminum content (y) of the primary LaNi{sub 5}-phase is controlled to produce the desired pressure-temperature behavior for adsorption and desorption of hydrogen. However, secondary phases cause decreased capacity and some may cause undesirable retention of tritium. Twenty-three alloys purchased from Ergenics, Inc. for development of RTF processes have been characterized by scanning electron microscopy (SEM) and by electron microprobe analysis (EMPA) to determine the distributions and compositions of constituent phases. This memorandum reports the results of these characterization studies. Knowledge of the structural characteristics of these alloys is a useful first step in selecting materials for specific process development tests and in interpreting results of those tests. Once this information is coupled with data on hydrogen plateau pressures, retention and capacity, secondary phase limits for RTF alloys can be specified.

  11. Synthesis and characterization of strontium-lanthanum apatites

    SciTech Connect

    Boughzala, K.; Salem, E. Ben; Chrifa, A. Ben; Gaudin, E.; Bouzouita, K. . E-mail: khaled.bouzouita@ipeim.rnu.tn

    2007-07-03

    Two series of strontium-lanthanum apatites, Sr{sub 10-x}La {sub x}(PO{sub 4}){sub 6-x}(SiO{sub 4}) {sub x}F{sub 2} and Sr{sub 10-x}La {sub x}(PO{sub 4}){sub 6-x}(SiO{sub 4}) {sub x}O with 0 {<=} x {<=} 6, were synthesized by solid state reaction in the temperature range of 1200-1400 deg. C. The obtained materials were characterized by powder X-ray diffraction, infrared absorption spectroscopy and solid {sup 31}P Nuclear Magnetic Resonance. Pure solid solutions were obtained within a limited range of unsubstituted phosphate and silicate apatites. A variation of the lattice parameters was observed, with an increase of a and a decrease of c parameters, related to the radius of the corresponding substituted ions.

  12. Sputtering studies during lanthanum implantation in stainless steels

    NASA Astrophysics Data System (ADS)

    Ager, F. J.; Respaldiza, M. A.; Soares, J. C.; da Silva, M. F.; Odriozola, J. A.

    1997-05-01

    Lanthanum ions of 100 keV have been implanted in AISI304 specimens at different doses. The erosion or sputtering of the surface atoms, either from the steel matrix or already implanted, during the implantation process imposes a limitation on the maximum implantable dose. Hoping to increase this dose, we deposited thin layers of aluminium and alumina (Al 2O 3) on top of steel samples of similar composition and sputtering behaviour (AISI302), as the sputtering effect is much weaker on such species and this layer could also prevent the steel atoms from being removed from the surface. The experimental determination of the sputtering coefficients, total or partial, and its comparison with theoretical values, when possible, is another aim of this work.

  13. Daily Fluoride Intake from Iranian Green Tea: Evaluation of Various Flavorings on Fluoride Release

    PubMed Central

    Maleki, Afshin; Daraei, Hiua; Mohammadi, Elham; Zandi, Shiva; Teymouri, Pari; Mahvi, Amir Hossien; Gharibi, Fardin

    2016-01-01

    With increased awareness of the health benefits of the compounds in green tea, especially polyphenols, its consumption is rising. The main purpose of this study is to determine the effect of different additives on the released fluoride into tea liquor and also daily fluoride intake. The concentrations of fluoride, nitrate, sulfate, and chloride were measured in 15 different flavored green teas (Refah-Lahijan). The fluoride and other anion concentrations were measured by ion chromatography method. The data were analyzed with Statistical Package for the Social Sciences version 16.0. The results showed that the minimum and maximum concentrations of fluoride in the green tea infusions were 0.162 mg/L (cinnamon-flavored green tea) and 3.29 mg/L (bagged peach-flavored green tea), respectively. The mean concentration of fluoride in the green tea leaves was 52 mg/kg, and approximately 89% of the fluoride was released from the green tea leaves into the infusions after brewing. The fluoride concentrations varied significantly among the examined green teas (P < 0.05). However, the additives had no significant effect on the fluoride release into the infusions (P > 0.05). Finally, drinking of the studied green teas cannot make a significant contribution to the daily dietary intake of F for consumers. PMID:27042093

  14. Daily Fluoride Intake from Iranian Green Tea: Evaluation of Various Flavorings on Fluoride Release.

    PubMed

    Maleki, Afshin; Daraei, Hiua; Mohammadi, Elham; Zandi, Shiva; Teymouri, Pari; Mahvi, Amir Hossien; Gharibi, Fardin

    2016-01-01

    With increased awareness of the health benefits of the compounds in green tea, especially polyphenols, its consumption is rising. The main purpose of this study is to determine the effect of different additives on the released fluoride into tea liquor and also daily fluoride intake. The concentrations of fluoride, nitrate, sulfate, and chloride were measured in 15 different flavored green teas (Refah-Lahijan). The fluoride and other anion concentrations were measured by ion chromatography method. The data were analyzed with Statistical Package for the Social Sciences version 16.0. The results showed that the minimum and maximum concentrations of fluoride in the green tea infusions were 0.162 mg/L (cinnamon-flavored green tea) and 3.29 mg/L (bagged peach-flavored green tea), respectively. The mean concentration of fluoride in the green tea leaves was 52 mg/kg, and approximately 89% of the fluoride was released from the green tea leaves into the infusions after brewing. The fluoride concentrations varied significantly among the examined green teas (P < 0.05). However, the additives had no significant effect on the fluoride release into the infusions (P > 0.05). Finally, drinking of the studied green teas cannot make a significant contribution to the daily dietary intake of F for consumers. PMID:27042093

  15. Effects of treatment with sodium fluoride and subsequent starvation on fluoride content of earthworms

    SciTech Connect

    Walton, K.C.

    1987-01-01

    The two experiments described here originated during a long-term investigation into the occurrence and movement of pollutant fluoride in a terrestrial ecosystem. Moles (Talpa europaea) whose diet consist largely of various species of earthworm Lumbricidae, are one of the species under investigation. Bone fluoride in moles was found to be higher, on average, than in foxes or small rodents. Moles probably acquire fluoride from their earthworm diet. Earthworms do not have any readily identifiable tissue in which to store large amounts of fluoride but, for their size, they have a considerable amount of soil in their gut, up oto 20% of their dry weight. Preliminary measurements of fluoride in whole earthworms suggested that observed levels could probably be accounted for by fluoride bound in the mineral part of contained soil and released during preparatory ashing. Two experiments to investigate this situation are described; here their aims were: to expose earthworms kept in soil to different concentrations of sodium fluoride; to measure resulting fluoride in earthworms when soil was removed from their gut by starvation for varying periods of time; and to compare amounts of fluoride in whole starved earthworms with those in starved earthworms from which remaining soil had also been physically removed by dissection and washing.

  16. Tribological behaviors of lanthanum-based phosphonate 3-aminopropyltriethoxysilane self-assembled films

    NASA Astrophysics Data System (ADS)

    Gu, Qinlin; Cheng, Xianhua

    2007-06-01

    Lanthanum-based thin films deposited on the phosphonate 3-aminopropyltriethoxysilane (APTES) self-assembled monolayer (SAM) were prepared on the hydroxylated glass substrate by a self-assembling process from specially formulated solution. Chemical compositions of the films and chemical state of the elements were detected by X-ray photoelectron spectrometry (XPS). The thickness of the films was determined with an ellipsometer, while the morphologies of the original and worn surfaces of the samples were analyzed by means of atomic force microscopy (AFM) and scanning electron microscopy (SEM), respectively. The tribological properties of the films sliding against GCr15 steel ball were evaluated on a UMT-2MT reciprocating friction and wear tester. As the results, the target film was obtained and reaction may have taken place between the film and the glass substrate. The tribological results show that lanthanum-based thin films are superior in reducing friction and resisting wear compared with APTES-SAM and phosphorylated APTES-SAM. SEM observation of the morphologies of worn surfaces indicates that the wear of APTES-SAM and the phosphorylated APTES-SAM is characteristic of brittle fracture and severe abrasion. Differently, slight abrasion and micro-crack dominate the wear of lanthanum-based thin films. The superior friction reduction and wear resistance of lanthanum-based thin films are attributed to the enhanced load-carrying capacity of the inorganic lanthanum particles in the lanthanum-based thin films as well as good adhesion of the films to the substrate.

  17. The management of hyperphosphatemia by lanthanum carbonate in chronic kidney disease patients

    PubMed Central

    Shigematsu, Takashi; Nakashima, Yuri; Ohya, Masaki; Tatsuta, Koichi; Koreeda, Daisuke; Yoshimoto, Wataru; Yamanaka, Shintaro; Sakaguchi, Toshifumi; Hanba, Yoshiyuki; Mima, Toru; Negi, Shigeo

    2012-01-01

    Hyperphosphatemia has been shown to be involved not only in the onset and progression of secondary hyperparathyroidism but also in vascular calcification. In addition, it influences the clinical course of patients with chronic kidney disease. Phosphate (Pi) binder is required in the management of hyperparaphosphatemia, because dietary Pi restriction and Pi removal by hemodialysis alone are insufficient. Lanthanum carbonate, a powerful Pi binder, has a similar effect to aluminum hydroxide in reducing serum Pi levels. As it is excreted via the liver, lanthanum carbonate has an advantage in patients with renal failure. The effect of lanthanum carbonate on serum Pi levels is almost two times higher than that of calcium (Ca) carbonate, which is commonly used. Lanthanum carbonate and Ca carbonate have an additive effect. Worldwide, there is 6 years worth of clinical treatment data on lanthanum carbonate; however, we have 3 years of clinical use in Japanese patients with hyperphosphatemia. No serious side effects have been reported. However, the most important concern is bone toxicity, which has been observed with use of aluminum hydroxide. For this study, clinical research involved analysis of bone biopsies. Although osteomalacia is the most noticeable side effect, this was not observed. Both the high- and the low-turnover bone disease concentrated into a normal bone turnover state. However, as the authors have less than 10 years’ clinical experience with lanthanum carbonate, patients should be monitored carefully. In addition, it is necessary to demonstrate whether potent treatment effects on hyperphosphatemia improve the long-term outcome. PMID:22723728

  18. Studies on gel-grown pure and strontium-modified lanthanum tartrate crystals

    NASA Astrophysics Data System (ADS)

    Firdous, A.; Quasim, I.; Ahmad, M. M.; Kotru, P. N.

    2009-07-01

    Crystals of pure and strontium-modified lanthanum tartrate bearing composition (La) 1-x(Sr) xC 4H 4O 6· nH 2O (where x=0, 0.04, 0.10, 0.15; n=5,5,6,8) were obtained using gel method. The materials were studied using CH analysis, X-ray powder diffraction, FTIR, EDAX and thermoanalytical techniques. X-ray powder diffraction results analyzed by using suitable software suggest that while unmodified lanthanum tartrate has a monoclinic structure with the space group P 21, the entry of strontium into its lattice changes the system to orthorhombic with the space group P 2121. The unit cell volume is observed to decrease with increase in the concentration of strontium in lanthanum tartrate. Thermal analysis suggests that pure lanthanum tartrate starts decomposing at 41.31 °C whereas the strontium-modified lanthanum tartrate brings about better thermal stability which increases with an increase in strontium concentration. The percentage weight loss calculations from the thermogram supplemented by EDAX, CH analysis and FTIR spectroscopy suggest that both unmodified and strontium-modified lanthanum tartrate spherulitic crystals contain water of hydration; the amount of water of hydration being different for crystals with different content of strontium.

  19. Materials corrosion in molten lithium fluoride-sodium fluoride-potassium fluoride eutectic salt

    NASA Astrophysics Data System (ADS)

    Olson, Luke Christopher

    Static corrosion studies were undertaken to determine the compatibility of several candidate high temperature materials for a heat transfer loop in a molten alkali fluoride eutectic salt, LiF-NaF-KF: 46.5-11.5-42 mol % (commonly referred to as FLiNaK), as well as a molten chloride near eutectic salt, KCl-MgCl2: 68-32 mol %. Several high temperature alloys: Hastelloy-N, Hastelloy-X, Haynes-230, Inconel-617, and Incoloy-800H, Nb-1Zr, a nearly pure Ni alloy Ni-201, and a C/SiSiC ceramic were exposed to molten FLiNaK at 850°C for 500 h in sealed graphite crucibles under an argon cover gas. Corrosion occurred predominantly from dealloying of Cr from the Cr bearing alloys, an effect that was particularly pronounced at the grain boundaries. Corrosion was noted to occur from selective attack of the Si phase in the C/SiSiC ceramic. Alloy weight-loss/area due to molten fluoride salt exposure correlated with the initial Cr-content of the alloys, and was consistent with the Cr-content measured in the salts after corrosion tests. The alloys' weight-loss/area was also found to correlate to the concentration of carbon present in the nominally 20% Cr containing alloys, due to the formation of chromium carbide phases at the grain boundaries. The corrosion mechanisms for the chloride based salt were found to be similar to those observed in FLiNaK, but the chemical attack was found to be less aggressive. Sulfamate Ni electroplating and Mo plasma spraying of Fe-Ni-Cr alloy coupons was investigated to mitigate Cr dissolution. A chemical vapor deposited pyrolytic carbon and SiC coating was also investigated to protect the C/SiSiC composites. Results indicate that Ni-plating has the potential to provide protection against alloy corrosion in molten fluoride salts. Furthermore, the presence of a chromium-oxide interlayer at the interface of the Ni-plating and alloy substrate can further improve the efficacy of the Ni-plating. The pyrolytic carbon and SiC coating on the C/SiSiC composites

  20. Shock Induced Birefringence in Lithium Fluoride

    SciTech Connect

    Holmes, N C

    2001-06-01

    We have used an ellipsometer to measure the birefringence of lithium fluoride in shock compression experiments. In previous x-ray diffraction experiments, single crystal [100] LiF has been reported to remain cubic at moderate pressures.

  1. AES analysis of barium fluoride thin films

    NASA Astrophysics Data System (ADS)

    Kashin, G. N.; Makhnjuk, V. I.; Rumjantseva, S. M.; Shchekochihin, Ju. M.

    1993-06-01

    AES analysis of thin films of metal fluorides is a difficult problem due to charging and decomposition of such films under electron bombardment. We have developed a simple algorithm for a reliable quantitative AES analysis of metal fluoride thin films (BaF 2 in our work). The relative AES sensitivity factors for barium and fluorine were determined from BaF 2 single-crystal samples. We have investigated the dependence of composition and stability of barium fluoride films on the substrate temperature during film growth. We found that the instability of BaF 2 films grown on GaAs substrates at high temperatures (> 525°C) is due to a loss of fluorine. Our results show that, under the optimal electron exposure conditions, AES can be used for a quantitative analysis of metal fluoride thin films.

  2. Materials processing apparatus development for fluoride glass

    NASA Technical Reports Server (NTRS)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  3. Well waters fluoride in Enugu, Nigeria.

    PubMed

    Ogbu, I Si; Okoro, O Io; Ugwuja, E I

    2012-04-01

    Abnormal fluoride levels in drinking water have been associated with adverse health effects. To determine the fluoride content of well waters in Enugu, southeastern Nigeria, water samples from 50 artisan wells chosen by multistage sampling procedure from the 5 zones of Enugu municipality were analyzed in duplicates for their fluoride content. The zonal mean values were 0.60, 0.70, 0.62, 0.62, and 0.63 mg/L for Abakpa Nike, Achara Layout, Obiagu/ Ogui, Trans Ekulu and Uwani, respectively (p<0.05). The mean value for the whole city was 0.63 mg/L. Although, the mean level of fluoride recorded in this study is currently within safe limits (1.5 mg/L, WHO 2011), it is important to monitor continuously the fluoride content of well waters in the municipality in view of the increasing industrial activities going on in the city and heavy reliance on well water for domestic purposes and the widespread use of consumer products containing fluoride. PMID:23022857

  4. Debating Water Fluoridation Before Dr. Strangelove.

    PubMed

    Carstairs, Catherine

    2015-08-01

    In the 1930s, scientists learned that small amounts of fluoride naturally occurring in water could protect teeth from decay, and the idea of artificially adding fluoride to public water supplies to achieve the same effect arose. In the 1940s and early 1950s, a number of studies were completed to determine whether fluoride could have harmful effects. The research suggested that the possibility of harm was small. In the early 1950s, Canadian and US medical, dental, and public health bodies all endorsed water fluoridation. I argue in this article that some early concerns about the toxicity of fluoride were put aside as evidence regarding the effectiveness and safety of water fluoridation mounted and as the opposition was taken over by people with little standing in the scientific, medical, and dental communities. The sense of optimism that infused postwar science and the desire of dentists to have a magic bullet that could wipe out tooth decay also affected the scientific debate. PMID:26066938

  5. Delivery Challenges for Fluoride, Chlorhexidine and Xylitol

    PubMed Central

    Featherstone, John DB

    2006-01-01

    The progression or reversal of dental caries is determined by the balance between pathological and protective factors. It is well established that a) fluoride inhibits demineralization and enhances remineralization, b) chlorhexidine reduces the cariogenic bacterial challenge, and c) xylitol is non-cariogenic and has antibacterial properties. The challenge that we face is how best to deliver these anti-caries entities at true therapeutic levels, over time, to favorably tip the caries balance. High caries risk people, including children with Early Childhood Caries (ECC), are a special challenge, since high cariogenic bacterial activity can override fluoride therapy. Current fluoride and chlorhexidine varnishes deliver all their activity within about 24 hours. Early studies with experimental slow release fluoride devices retained elevated levels of fluoride for months in a therapeutic range but have not been pursued. Preventive dentistry has largely ignored the benefits of reducing the bacterial challenge, partially due to primitive and inadequate delivery systems. For example, Chlorhexidine applied as a rinse partially reduces some bacteria but not others that are hiding within the biofilm. Better antibacterials and better delivery systems are needed. Xylitol delivered by gum or lozenge appears to be effective clinically in reducing cariogenic bacteria and caries levels, but novel systems that deliver therapeutic amounts when needed would be a major advance, especially for young children. Reducing the cariogenic bacterial challenge and enhancing the effect of fluoride by the use of new sustained-delivery systems would have a major effect on dealing with caries as a disease. PMID:16934125

  6. Isothermal vapor-liquid equilibria for the systems 1-chloro-1,1-difluoroethane + hydrogen fluoride, 1,1-dichloro-1-fluoroethane + hydrogen fluoride, and chlorodifluoromethane + hydrogen fluoride

    SciTech Connect

    Kang, Y.W.; Lee, Y.Y.

    1997-03-01

    Isothermal vapor-liquid equilibria for the three binary systems (1-chloro-1,1-difluoroethane + hydrogen fluoride, 1,1-dichloro-1-fluoroethane + hydrogen fluoride, and chlorodifluoromethane + hydrogen fluoride) have been measured. The experimental data for the binary systems are correlated with the NRTL equation with the vapor-phase association model for the mixtures containing hydrogen fluoride, and the relevant parameters are presented. All of the systems form minimum boiling heterogeneous azeotropes.

  7. Toxicity of Two Different Sized Lanthanum Oxides in Cultured Cells and Sprague-Dawley Rats

    PubMed Central

    2015-01-01

    In recent years, the use of both nano- and micro-sized lanthanum has been increasing in the production of optical glasses, batteries, alloys, etc. However, a hazard assessment has not been performed to determine the degree of toxicity of lanthanum. Therefore, the purpose of this study was to identify the toxicity of both nano- and micro-sized lanthanum oxide in cultured cells and rats. After identifying the size and the morphology of lanthanum oxides, the toxicity of two different sized lanthanum oxides was compared in cultured RAW264.7 cells and A549 cells. The toxicity of the lanthanum oxides was also analyzed using rats. The half maximal inhibitory concentrations of micro-La2O3 in the RAW264.7 cells, with and without sonication, were 17.3 and 12.7 times higher than those of nano-La2O3, respectively. Similar to the RAW264.7 cells, the toxicity of nano-La2O3 was stronger than that of micro-La2O3 in the A549 cells. We found that nano-La2O3 was absorbed in the lungs more and was eliminated more slowly than micro-La2O3. At a dosage that did not affect the body weight, numbers of leukocytes, and concentrations of lactate dehydrogenase and albumin in the bronchoalveolar lavage (BAL) fluids, the weight of the lungs increased. Inflammatory effects on BAL decreased over time, but lung weight increased and the proteinosis of the lung became severe over time. The effects of particle size on the toxicity of lanthanum oxides in rats were less than in the cultured cells. In conclusion, smaller lanthanum oxides were more toxic in the cultured cells, and sonication decreased their size and increased their toxicity. The smaller-sized lanthanum was absorbed more into the lungs and caused more toxicity in the lungs. The histopathological symptoms caused by lanthanum oxide in the lungs did not go away and continued to worsen until 13 weeks after the initial exposure. PMID:26191385

  8. Influence of Individual Saliva Secretion on Fluoride Bioavailability

    PubMed Central

    Naumova, E.A; Gaengler, P; Zimmer, S; Arnold, W.H

    2010-01-01

    The aim of this preliminary investigation was to compare the individual saliva secretion rate with the fluoride bioavailability in saliva after using sodium fluoride and amine fluoride. Methods: To assess oral fluoride kinetics 10 highly trained volunteers brushed their teeth with one of the formulations and saliva was collected. The amount of saliva was measured, and the fluoride content was determined. Data underwent statistical analysis using the Mann-Whitney-U test and Pearson correlation. The ex vivo experiment I included individual saliva collection of the same volunteers. Then the oral hygiene products were solved in equal amounts of whole saliva (ex-vivo experiment II), and the fluoride content was measured. Finally, both products were dispersed in distilled water (ex-vivo experiment III) to calculate the dissociation of both products in water. Results: In vivo results of fluoride content after 3 min. tooth brushing demonstrated a negative correlation with saliva secretion: for NaF r = -0.695 (p<0.01) and for amine fluoride r = -0.446 (p<0.01). The in-vitro experiment I resulted for NaF in 251.7±22.4 µg/g fluoride and for amine fluoride in 171.7±14.4 µg/g. Conclusions: Fluoride bioavailability of saliva after exposure to NaF was higher compared to amine fluoride. The individual secretion rate changes the fluoride content and normal secretors keep the fluoride availability longer. PMID:21221176

  9. The effective use of fluorides in public health.

    PubMed Central

    Jones, Sheila; Burt, Brian A.; Petersen, Poul Erik; Lennon, Michael A.

    2005-01-01

    Dental caries remain a public health problem for many developing countries and for underprivileged populations in developed countries. This paper outlines the historical development of public health approaches to the use of fluoride and comments on their effectiveness. Early research and development was concerned with waterborne fluorides, both naturally occurring and added, and their effects on the prevalence and incidence of dental caries and dental fluorosis. In the latter half of the 20th century, the focus of research was on fluoride toothpastes and mouth rinses. More recently, systematic reviews summarizing these extensive databases have indicated that water fluoridation and fluoride toothpastes both substantially reduce the prevalence and incidence of dental caries. We present four case studies that illustrate the use of fluoride in modern public health practice, focusing on: recent water fluoridation schemes in California, USA; salt fluoridation in Jamaica; milk fluoridation in Chile; and the development of "affordable" fluoride toothpastes in Indonesia. Common themes are the concern to reduce demands for compliance with fluoride regimes that rely upon action by individuals and their families, and the issue of cost. We recommend that a community should use no more than one systemic fluoride (i.e. water or salt or milk fluoridation) combined with the use of fluoride toothpastes, and that the prevalence of dental fluorosis should be monitored in order to detect increases in or higher-than-acceptable levels. PMID:16211158

  10. Analysis of 1-Minute Potentially Available Fluoride from Dentifrice

    PubMed Central

    Carey, Clifton M; Holahan, Erin C; Schmuck, Burton D

    2014-01-01

    Previous reports found that some fluoride-containing dentifrices do not release effective concentrations of fluoride during brushing. Failure to release fluoride can be due to dentifrice matrix components that interfere with the solubilization of the fluoride salts during brushing. A new generation of dentifrices has the capability to precipitate beneficial fluoride salts during tooth brushing. Therefore, a method that assesses the potentially available fluoride during the 1-minute brushing is needed. A new filter-paper absorption method to assess the 1-min bioavailable fluoride concentration was developed to meet this need. This method utilizes coiled filter paper that rapidly absorbs the aqueous phase of the dentifrice slurry followed by centrifugation to recover that fluid for fluoride measurement via fluoride ion-selective electrode. The analytical method was used to successfully determine the total fluoride and 1-min bioavailable fluoride in eight dentifrice products containing sodium fluoride (NaF), disodium monofluorophosphate (Na2FPO3, MFP), stannous fluoride (SnF2), or NaF with amorphous calcium phosphate (NaF + ACP). The results showed that some of the dentifrices tested had significantly lower potentially available fluoride than the total fluoride. For a MFP-containing sample, aged seven years past its expiry date, there was significant reduction in the bioavailable fluoride compared to MFP products that were not aged. Other than the aged MFP and the SnF2-containing samples the bioavailable fluoride for all products tested had at least 80 % of the label fluoride concentration. The filter paper absorption method yielded reproducible results for the products tested with MFP samples showing the largest variations. PMID:25821392

  11. Hydrogen fluoride and deuterium fluoride lasers. Citations from the International Aerospace Abstracts data base

    NASA Technical Reports Server (NTRS)

    Mauk, S. C.

    1980-01-01

    Research cited from the international literature adresses various aspects of hydrogen fluoride and deuterium fluoride lasers. Topics covered include flows, laser outputs, molecular relaxation, molecular rotation, energy conversion efficiency, reaction kinetics, and laser materials. Continous wave and pulsed laser are considered. This updated bibliography contains 283 citations, 53 of which are new additions to the previous edition.

  12. Oral fluoride levels 1 h after use of a sodium fluoride rinse: effect of sodium lauryl sulfate.

    PubMed

    Vogel, Gerald L; Schumacher, Gary E; Chow, Laurence C; Tenuta, Livia M A

    2015-01-01

    Increasing the concentration of free fluoride in oral fluids is an important goal in the use of topical fluoride agents. Although sodium lauryl sulfate (SLS) is a common dentifrice ingredient, the influence of this ion on plaque fluid and salivary fluid fluoride has not been examined. The purpose of this study was to investigate the effect of SLS on these parameters and to examine the effect of this ion on total (or whole) plaque fluoride, an important source of plaque fluid fluoride after a sufficient interval following fluoride administration, and on total salivary fluoride, a parameter often used as a surrogate measure of salivary fluid fluoride. Ten subjects accumulated plaque for 48 h before rinsing with a 12 mmol/l NaF (228 µg/g F) rinse containing or not containing 0.5% (w/w) SLS. SLS had no statistically significant effect on total plaque and total saliva fluoride but significantly increased salivary fluid and plaque fluid fluoride (by 147 and 205%, respectively). These results suggest that the nonfluoride components of topical agents can be manipulated to improve the fluoride release characteristics from oral fluoride reservoirs and that statistically significant change may be observed in plaque fluid and salivary fluid fluoride concentrations that may not be observed in total plaque and total saliva fluoride concentrations. PMID:25924684

  13. A comparative assessment of fluoride concentration available in saliva using daily prescribed topical fluoride agents

    PubMed Central

    Talwar, Manjit; Tewari, Amrit; Chawla, H. S.; Sachdev, Vinod

    2016-01-01

    Objective: To assess the availability of fluoride concentration in saliva following the use of fluoride mouthrinse and dentifrice. Materials and Methods: The experiment was carried out in 7–15 year-old school children of Chandigarh (n = 90). The children were nonfluoride users. Baseline saliva samples were collected. The subjects were exposed to two test agents, i.e., fluoride mouthrinse (0.05%, 225 ppm F) and dentifrice (1000 ppm F) for 7 days and on the day 8, saliva samples were collected over a 20 hrs period. Wash out period of 31/2 months was there before the subjects were exposed to the second test agent. Fluoride in saliva was estimated using fluoride ion-specific electrode. Written informed consent was taken. Statistical Analysis: Kolmogorov–Smirnov test was applied to test the normality of the variables. Mann–Whitney U-test was used to compare the fluoride concentration available in saliva at respective time intervals subsequent to use of the two test agents. Results: Fluoride concentration was elevated in saliva compared to baseline for both the test agents. Fluoride mouthrinse (0.05% sodium fluoride [NaF]) and dentifrice (1000 ppm monofluorophosphate [MFP]) showed a biphasic clearance. Peak in saliva occurred at 15 mins postuse. Night-time use resulted in higher concentration of fluoride in saliva compared to baseline. There was statistically significantly higher fluoride concentration available in saliva for the dentifrice at 5 hrs, 10 hrs, and 20 hrs postuse (P < 0.05). Conclusion: Subsequent to the use of NaF (0.05%) daily mouthrinse and MFP dentifrice (1000 ppm) the fluoride concentration in saliva remained elevated to a level of 0.12 ppm for mouthrinse and 0.14 ppm for dentifrice compared to baseline (0.03 ppm) up to 20 hrs postuse. The therapeutic window though not yet established but suggested is 0.1–1 ppm for prevention of demineralization, indicating that daily use of fluoride mouthrinse and dentifrice provides fluoride concentration in

  14. In vitro bioequivalence approach for a locally acting gastrointestinal drug: lanthanum carbonate.

    PubMed

    Yang, Yongsheng; Shah, Rakhi B; Yu, Lawrence X; Khan, Mansoor A

    2013-02-01

    A conventional human pharmacokinetic (PK) in vivo study is often considered as the "gold standard" to determine bioequivalence (BE) of drug products. However, this BE approach is not always applicable to the products not intended to be delivered into the systemic circulation. For locally acting gastrointestinal (GI) products, well designed in vitro approaches might be more practical in that they are able not only to qualitatively predict the presence of the active substance at the site of action but also to specifically assess the performance of the active substance. For example, lanthanum carbonate chewable tablet, a locally acting GI phosphate binder when orally administrated, can release free lanthanum ions in the acid environment of the upper GI tract. The lanthanum ions directly reach the site of action to bind with dietary phosphate released from food to form highly insoluble lanthanum-phosphate complexes. This prevents the absorption of phosphate consequently reducing the serum phosphate. Thus, using a conventional PK approach to demonstrate BE is meaningless since plasma levels are not relevant for local efficacy in the GI tract. Additionally the bioavailability of lanthanum carbonate is less than 0.002%, and therefore, the PK approach is not feasible. Therefore, an alternative assessment method is required. This paper presents an in vitro approach that can be used in lieu of PK or clinical studies to determine the BE of lanthanum carbonate chewable tablets. It is hoped that this information can be used to finalize an in vitro guidance for BE studies of lanthanum carbonate chewable tablets as well as to assist with "in vivo" biowaiver decision making. The scientific information might be useful to the pharmaceutical industry for the purpose of planning and designing future BE studies. PMID:23249191

  15. Crystal structure of Eu-doped magnetoplumbite-type lanthanum aluminum oxynitride with emission site splitting

    SciTech Connect

    Masubuchi, Yuji; Hata, Tomoyuki; Motohashi, Teruki; Kikkawa, Shinichi

    2011-09-15

    Eu-doped lanthanum aluminum oxynitride (LaAl{sub 12}(O,N){sub 19}) with magnetoplumbite structure was prepared by nitridation of the oxide precursor obtained from aluminum glycine gel and subsequent post-annealing. Eu-doped lanthanum aluminum oxynitride exhibited blue light emission at 440 nm with a shoulder at 464 nm under excitation at 254 nm. Isostructural Eu-doped calcium aluminum oxide (CaAl{sub 12}O{sub 19}) exhibited a single emission peak at 415 nm. Structural refinement using neutron powder diffraction indicated that the lanthanum site occupied partially by Eu{sup 2+} splits into 2d and 6h sites in the aluminum oxynitride. The longer emission and the shoulder peak in the former aluminum oxynitride were observed in relation to the increasing covalency as well as crystal field splitting around doped Eu{sup 2+} induced by site splitting involved with the two kinds of anions. - Graphical Abstract: Magnetoplumbite type Eu-doped lanthanum aluminum oxynitride has lanthanum site splitting induced by two kinds of anions, causing two emission peaks. Highlights: > Magnetoplumbite type LaAl{sub 12}(O,N){sub 19} doped with Eu shows emission peak splitting. > ND analysis is performed on La{sub 0.97}Eu{sub 0.03}Al{sub 12}(O,N){sub 19} and Ca{sub 0.97}Eu{sub 0.03}Al{sub 12}O{sub 19}. > La{sub 0.97}Eu{sub 0.03}Al{sub 12}(O,N){sub 19} has lanthanum site splitting. > The lanthanum site splitting is induced by coexisting of two kinds of anions.

  16. Influence of the method of fluoride administration on toxicity and fluoride concentrations in Japanese quail

    USGS Publications Warehouse

    Fleming, W.J.; Schuler, C.A.

    1988-01-01

    Young Japanese quail (Coturnix japonica) were administered NaF for 16 d either in their diet or by esophageal intubation. Based on the total fluoride ion (Emg F-) intake over the l6-d experimental period, fluoride administered by intubation was at least six times more toxic than that fed in the diet. Dietary concentrations of 1,000 ppm F- (Emg F- for 16 d = approx. 144) produced no mortality, whereas intubated doses produced 73% or greater mortality in all groups administered 54 mg F- /kg/d or more (Emg F- for 16 d _ approx. 23 mg). GraphIc companson of the regression of log F- ppm in femurs/mg F- intake showed that fluoride levels in the femurs of quail administered fluoride by intubation were higher than in those administered fluoride in the diet.

  17. Ion release from, and fluoride recharge of a composite with a fluoride-containing bioactive glass

    PubMed Central

    Davis, Harry B.; Gwinner, Fernanda; Mitchell, John C.; Ferracane, Jack L.

    2014-01-01

    Objectives Materials that are capable of releasing ions such as calcium and fluoride, that are necessary for remineralization of dentin and enamel, have been the topic of intensive research for many years. The source of calcium has most often been some form of calcium phosphate, and that for fluoride has been one of several metal fluoride or hexafluorophosphate salts. Fluoride-containing bioactive glass (BAG) prepared by the sol-gel method acts as a single source of both calcium and fluoride ions in aqueous solutions. The objective of this investigation was to determine if BAG, when added to a composite formulation, can be used as a single source for calcium and fluoride ion release over an extended time period, and to determine if the BAG-containing composite can be recharged upon exposure to a solution of 5,000 ppm fluoride. Methods BAG 61 (61% Si; 31% Ca; 4% P; 3% F; 1% B) and BAG 81 (81% Si; 11% Ca; 4% P; 3% F; 1% B) were synthesized by the sol gel method. The composite used was composed of 50/50 Bis-GMA/TEGDMA, 0.8% EDMAB, 0.4% CQ, and 0.05% BHT, combined with a mixture of BAG (15%) and strontium glass (85%) to a total filler load of 72% by weight. Disks were prepared, allowed to age for 24 h, abraded, then placed into DI water. Calcium and fluoride release was measured by atomic absorption spectroscopy and fluoride ion selective electrode methods, respectively, after 2, 22, and 222 h. The composite samples were then soaked for 5 min in an aqueous 5,000 ppm fluoride solution, after which calcium and fluoride release was again measured at 2, 22, and 222 h time points. Results Prior to fluoride recharge, release of fluoride ions was similar for the BAG 61 and BAG 81 composites after 2 h, and also similar after 22 h. At the four subsequent time points, one prior to, and three following fluoride recharge, the BAG 81 composite released significantly more fluoride ions (p<0.05). Both composites were recharged by exposure to 5,000 ppm fluoride, although the BAG 81

  18. Mechanism of Electrophilic Fluorination with Pd(IV): Fluoride Capture and Subsequent Oxidative Fluoride Transfer(.)

    PubMed

    Brandt, Jochen R; Lee, Eunsung; Boursalian, Gregory B; Ritter, Tobias

    2014-01-01

    Electrophilic fluorinating reagents derived from fluoride are desirable for the synthesis of (18)F-labeled molecules for positron emission tomography (PET). Here, we study the mechanism by which a Pd(IV)-complex captures fluoride and subsequently transfers it to nucleophiles. The intermediate Pd(IV)-F is formed with high rates even at the nano- to micromolar fluoride concentrations typical for radiosyntheses with (18)F due to fast formation of an outer-sphere complex between fluoride and Pd(IV). The subsequent fluorine transfer from the Pd(IV)-F complex is proposed to proceed through an unusual SET/fluoride transfer/SET mechanism. The findings detailed in this manuscript provide a theoretical foundation suitable for addressing a more general approach for electrophilic fluorination with high specific activity (18)F PET imaging. PMID:24376910

  19. Conversion to lanthanum carbonate monotherapy effectively controls serum phosphorus with a reduced tablet burden: a multicenter open-label study

    PubMed Central

    2011-01-01

    Abstract Background Lanthanum carbonate (FOSRENOL®) is an effective, well-tolerated phosphate binder. The ability of lanthanum to reduce serum phosphorus levels to ≤5.5 mg/dL in patients with end-stage renal disease (ESRD) was assessed in a clinical practice setting. Methods A 16-week, phase IV study enrolled 2763 patients at 223 US sites to evaluate the efficacy of lanthanum carbonate in controlling serum phosphorus in patients with ESRD, and patient and physician satisfaction with, and preference for, lanthanum carbonate after conversion from other phosphate-binder medications. Patients received lanthanum carbonate prescriptions from physicians. These prescriptions were filled at local pharmacies rather than obtaining medication at the clinical trial site. Changes from serum phosphorus baseline values were analyzed using paired t tests. Patient and physician preferences for lanthanum carbonate versus previous medications were assessed using binomial proportion tests. Satisfaction was analyzed using the McNemar test. Daily dose, tablet burden, and laboratory values including albumin-adjusted serum calcium, calcium × phosphorus product, and parathyroid hormone levels were secondary endpoints. Results Serum phosphorus control (≤5.5 mg/dL) was effectively maintained in patients converting to lanthanum carbonate monotherapy; 41.6% of patients had controlled serum phosphate levels at 16 weeks. Patients and physicians expressed markedly higher satisfaction with lanthanum carbonate, and preferred lanthanum carbonate over previous medication. There were significant reductions in daily dose and daily tablet burden after conversion to lanthanum carbonate. Conclusions Serum phosphorus levels were effectively maintained in patients converted from other phosphate-binder medications to lanthanum carbonate, with increased satisfaction and reduced tablet burden. Trial Registration ClinicalTrials.gov: NCT0016012 PMID:21962172

  20. Global Measurements of Atmospheric Sulfuryl Fluoride

    NASA Astrophysics Data System (ADS)

    Mühle, J.; Harth, C. M.; Salameh, P.; Miller, B. R.; Weiss, R. F.; Porter, L. W.; Fraser, P. J.; Greally, B. R.; O'Doherty, S.

    2006-12-01

    Sulfuryl fluoride (SO2F2) is used increasingly as a fumigant, but information about its emissions to the atmosphere is limited. Its atmospheric fate and lifetime are uncertain, with hydrolysis in the basic surface waters of the oceans a likely dominant sink, and its roles as a greenhouse gas and as a sulfur source to the stratosphere are unknown. We present here the first results of two years of high-frequency high-precision in situ observations of sulfuryl fluoride in the AGAGE (Advanced Global Atmospheric Gases Experiment) global measurement program. At La Jolla, California, baseline conditions are rarely achieved, and pollution events of up to 1.7 ppb (the exposure limit is 5 ppm) from nearby structural fumigation are common. At the Mace Head, Ireland, and Cape Grim, Tasmania, AGAGE stations, baseline conditions are observed with mixing ratios at the beginning of 2005 of ~1.0 ppt and ~0.9 ppt, respectively. Measured growth rates at these stations are ~0.06 ppt per year and ~0.04 ppt per year, respectively. Using these preliminary results and assuming no significant emissions in the southern hemisphere, a simple 2-box model can be used to estimate the tropospheric lifetime of sulfuryl fluoride as about one and a half decades, which is substantially longer than previous industry estimates. The corresponding modeled sulfuryl fluoride flux to the troposphere is ~2 x 109 g per year. Based on these initial measurements, the current global warming contribution of sulfuryl fluoride is likely small. Although the lifetime of sulfuryl fluoride is longer than that of carbonyl sulfide, sulfuryl fluoride is likely less important as source of sulfur to the stratosphere, due to its low atmospheric mixing ratio.

  1. Caries inhibition by fluoride-releasing primers.

    PubMed

    Kerber, L J; Donly, K J

    1993-10-01

    This study evaluated the caries inhibition of dentin primers with the addition of fluoride. Two standardized Class V preparations were placed in 20 molars, the gingival margin placed below the cementoenamel junction and the occlusal margin placed in enamel. Two dentin primers (Syntac and ScotchPrep) were placed in equal numbers of 20 preparations, according to manufacturer's instructions. Ammonium fluoride (10% by weight) was then added to these primers and they were placed in the remaining 20 preparations, opposing the non-fluoridated primer of the same system. All teeth were then restored with a non-fluoridated resin composite. All teeth were subjected to an artificial caries challenge (pH 4.2) for 5 days. Sections of 100 microns were obtained, photographed under polarized light microscopy, then demineralized areas were quantitated by digitization. Results demonstrated the mean areas (mm2 +/- S.D.) demineralization at 0.25 mm, 0.5 mm and 1.0 mm from the restoration margin to be: Syntac/fluoride (1.44 +/- 0.49, 1.68 +/- 0.54, 3.72 +/- 0.74); Syntac (1.99 +/- 0.58, 1.50 +/- 0.35, 2.98 +/- 1.26); ScotchPrep/fluoride (1.23 +/- 0.68, 1.55 +/- 0.64, 3.08 +/- 1.16); ScotchPrep (1.90 +/- 0.83, 1.71 +/- .038, 3.36 +/- 0.62). A paired t-test indicated primers with fluoride to demonstrate significantly less demineralization 0.25 mm from the restoration margin (P < 0.07). PMID:7880460

  2. Potentiometric measurement of polymer-membrane electrodes based on lanthanum

    NASA Astrophysics Data System (ADS)

    Saefurohman, Asep; Buchari, Noviandri, Indra; Syoni

    2014-03-01

    Quantitative analysis of rare earth elements which are considered as the standard method that has a high accuracy, and detection limits achieved by the order of ppm is inductively coupled plasma atomic emission spectroscopy (ICPAES). But these tools are expensive and valuable analysis of the high cost of implementation. In this study be made and characterized selective electrode for the determination of rare earth ions is potentiometric. Membrane manufacturing techniques studied is based on immersion (liquid impregnated membrane) in PTFE 0.5 pore size. As ionophores to be used tri butyl phosphate (TBP) and bis(2-etylhexyl) hydrogen phosphate. There is no report previously that TBP used as ionophore in polymeric membrane based lanthanum. Some parameters that affect the performance of membrane electrode such as membrane composition, membrane thickness, and types of membrane materials studied in this research. Manufacturing of Ion Selective Electrodes (ISE) Lanthanum (La) by means of impregnation La membrane in TBP in kerosene solution has been done and showed performance for ISE-La. FTIR spectrum results for PTFE 0.5 pore size which impregnated in TBP and PTFE blank showed difference of spectra in the top 1257 cm-1, 1031 cm-1 and 794.7 cm-1 for P=O stretching and stretching POC from group -OP =O. The result showed shift wave number for P =O stretching of the cluster (-OP=O) in PTFE-TBP mixture that is at the peak of 1230 cm-1 indicated that no interaction bond between hydroxyl group of molecules with molecular clusters fosforil of TBP or R3P = O. The membrane had stable responses in pH range between 1 and 9. Good responses were obtained using 10-3 M La(III) internal solution, which produced relatively high potential. ISE-La showed relatively good performances. The electrode had a response time of 29±4.5 second and could be use for 50 days. The linear range was between 10-5 and 10-1 M.

  3. Potentiometric measurement of polymer-membrane electrodes based on lanthanum

    SciTech Connect

    Saefurohman, Asep Buchari, Noviandri, Indra; Syoni

    2014-03-24

    Quantitative analysis of rare earth elements which are considered as the standard method that has a high accuracy, and detection limits achieved by the order of ppm is inductively coupled plasma atomic emission spectroscopy (ICPAES). But these tools are expensive and valuable analysis of the high cost of implementation. In this study be made and characterized selective electrode for the determination of rare earth ions is potentiometric. Membrane manufacturing techniques studied is based on immersion (liquid impregnated membrane) in PTFE 0.5 pore size. As ionophores to be used tri butyl phosphate (TBP) and bis(2-etylhexyl) hydrogen phosphate. There is no report previously that TBP used as ionophore in polymeric membrane based lanthanum. Some parameters that affect the performance of membrane electrode such as membrane composition, membrane thickness, and types of membrane materials studied in this research. Manufacturing of Ion Selective Electrodes (ISE) Lanthanum (La) by means of impregnation La membrane in TBP in kerosene solution has been done and showed performance for ISE-La. FTIR spectrum results for PTFE 0.5 pore size which impregnated in TBP and PTFE blank showed difference of spectra in the top 1257 cm{sup −1}, 1031 cm{sup −1} and 794.7 cm{sup −1} for P=O stretching and stretching POC from group −OP =O. The result showed shift wave number for P =O stretching of the cluster (−OP=O) in PTFE-TBP mixture that is at the peak of 1230 cm{sup −1} indicated that no interaction bond between hydroxyl group of molecules with molecular clusters fosforil of TBP or R{sub 3}P = O. The membrane had stable responses in pH range between 1 and 9. Good responses were obtained using 10{sup −3} M La(III) internal solution, which produced relatively high potential. ISE-La showed relatively good performances. The electrode had a response time of 29±4.5 second and could be use for 50 days. The linear range was between 10{sup −5} and 10{sup −1} M.

  4. The Northland fluoridation advocacy programme: an evaluation.

    PubMed

    Gowda, Sunitha; Thomas, David R

    2008-12-01

    On 20 July 2006, the Far North District Council resolved to fluoridate Kaitaia and Kaikohe. This was the first such initiative by any Territorial Local Authority (TLA) in New Zealand for 23 years, and resulted from a fluoridation advocacy programme. This paper describes the programme implementation, assesses its consistency with the principles of the Treaty of Waitangi, and critically examines the collaboration between the fluoride advocate and the key stakeholders. Process evaluation identified three main categories of programme implementation: policy advocacy, community action projects, and media advocacy. The collaboration of iwi, Maori health providers and the community suggests that the programme was consistent with the principles (partnership, participation and protection) ofthe Treaty ofWaitangi. Media advocacy played an important role in reflecting and engaging community views on fluoridation, and it influenced decision-making by the Far North District Council. The simultaneous, combined 'top-down and bottom-up' approach was an effective and successful strategy for fluoridation advocacy in the community. Less integrated approaches implemented on their own (such as the 'top down' approach in Whangarei and the 'bottom-up' approach in Dargaville) were not effective. PMID:19180864

  5. Emissions of fluorides from welding processes.

    PubMed

    Szewczyńska, Małgorzata; Pągowska, Emilia; Pyrzyńska, Krystyna

    2015-11-01

    The levels of fluoride airborne particulates emitted from welding processes were investigated. They were sampled with the patented IOM Sampler, developed by J. H. Vincent and D. Mark at the Institute of Occupational Medicine (IOM), personal inhalable sampler for simultaneous collection of the inhalable and respirable size fractions. Ion chromatography with conductometric detection was used for quantitative analysis. The efficiency of fluoride extraction from the cellulose filter of the IOM sampler was examined using the standard sample of urban air particle matter SRM-1648a. The best results for extraction were obtained when water and the anionic surfactant N-Cetyl-N-N-N-trimethylammonium bromide (CTAB) were used in an ultrasonic bath. The limits of detection and quantification for the whole procedure were 8μg/L and 24μg/L, respectively. The linear range of calibration was 0.01-10mg/L, which corresponds to 0.0001-0.1mg of fluorides per m(3) in collection of a 20L air sample. The concentration of fluorides in the respirable fraction of collected air samples was in the range of 0.20-1.82mg/m(3), while the inhalable fraction contained 0.23-1.96mg/m(3) of fluorides during an eight-hour working day in the welding room. PMID:26574102

  6. Fluoride and chlorhexidine release from filled resins.

    PubMed

    Shen, C; Zhang, N-Z; Anusavice, K J

    2010-09-01

    Resin-based materials that release either fluoride or chlorhexidine have been formulated for inhibiting caries activity. It is not known if the two agents, when incorporated into one material, would interact and affect their release potential. We hypothesized that the ratio of fluoride to chlorhexidine incorporated into a resin, and the pH of the storage medium, will affect their releases from the material. The material investigated contained 23 wt% of filler, and the ratios of calcium fluoride to chlorhexidine diacetate were 8/2, 5/5, and 2/8. The release was conducted in pH 4, 5, and 6 acetate buffers. The results showed that release of either agent increased as the pH of the medium decreased. The presence of fluoride salt substantially reduced the chlorhexidine release, while the presence of a specific quantity of chlorhexidine significantly increased fluoride release. This interaction can be utilized to optimize the release of either agent for therapeutic purposes. PMID:20581354

  7. Influence of lanthanum oxide as quality promoter on cathodes for MCFC

    NASA Astrophysics Data System (ADS)

    Escudero, M. J.; Nóvoa, X. R.; Rodrigo, T.; Daza, L.

    A novel material based on lithium nickel mixed oxides modified by lanthanum impregnation was investigated as an alternative cathode for molten carbonate fuel cells (MCFCs). The electrochemical behaviour of the new cathode material was evaluated in an eutectic mixture of lithium and potassium (Li:K, 62:38) at 650 °C by electrochemical impedance spectroscopy (EIS) as a function of lanthanum content, immersion time and gas composition. The impedance spectra inform on electrode structural changes during the first 100 h. The loss of lithium and the low dissolution of nickel and lanthanum are responsible of these changes. Later on, the structure reaches a stable state. The lanthanum-impregnated cathodes show higher catalytic activity for oxygen reduction and lower dissolution of nickel oxide than the lanthanum-free sample. The cathode material having 0.3 wt.% of La 2O 3 shows the best behaviour. The loss of lithium was confirmed by X-ray diffraction (XRD) and inductive coupled plasma-atomic emission spectroscopy (ICP-AES).

  8. Lanthanum: new drug. Hyperphosphataemia in dialysis patients: more potential problems than benefits.

    PubMed

    2007-04-01

    (1) In dialysis patients with chronic renal failure, hyperphosphataemia can cause osteorenal dystrophy, leading to bone pain, fractures and excess cardiovascular mortality. In addition to a low-phosphorus diet and dialysis, phosphorus chelators are usually needed to control blood phosphorus levels. The first choice is calcium carbonate, and sevelamer is an alternative. (2) Lanthanum carbonate, a phosphorus chelator, is now also licensed for the treatment of hyperphosphataemia in dialysis patients with chronic renal failure. (3) In addition to three dose-finding placebo-controlled studies, clinical evaluation includes 2 comparative randomised unblinded trials: one 6-month trial versus calcium carbonate and a 2-year trial versus other phosphorus chelators. During these trials, lanthanum was no more effective than the comparators in terms of effects on the mortality rate, incidence of fractures, or blood phosphorus level. (4) During these trials, adverse events attributed to treatment were more frequent with lanthanum than with the other phosphorus chelators. The main problems were gastrointestinal disorders (nausea, vomiting, diarrhoea, constipation and abdominal pain), headaches, seizures, and encephalopathy. (5) The accumulation of lanthanum in the bones and brain is troubling. The known long-term adverse effects of aluminium, another trivalent cation with weak gastrointestinal absorption, suggest that caution is also required with lanthanum. (6) In practice, when a phosphorus chelator is needed to treat hyperphosphataemia in dialysis patients with chronic renal failure, calcium carbonate is the first choice and sevelamer remains the best alternative. PMID:17458039

  9. Enhancement of ferromagnetic and dielectric properties of lanthanum doped bismuth ferrite nanostructures

    SciTech Connect

    Chaudhuri, A.; Mandal, K.

    2012-04-15

    Highlights: Black-Right-Pointing-Pointer Rod shaped lanthanum doped bismuth ferrite was obtained. Black-Right-Pointing-Pointer The diameter of the particles were found to be decreasing on doping with lanthanum. Black-Right-Pointing-Pointer Both ferromagnetic and dielectric properties enhanced. Black-Right-Pointing-Pointer A transition due to spin canting is observed near 550 Degree-Sign C. Black-Right-Pointing-Pointer Electron spin resonance study shows the breakage of spin cycloid due to doping. -- Abstract: Cylindrical-shaped multiferroic Bi{sub 1-x}La{sub x}FeO{sub 3} (x = 0.0, 0.05, 0.1 and 0.15) were synthesized successfully by hydrothermal method. All samples were found to be rhombohedrally distorted perovskite structure. Diameter of the cylindrical particles reduces from {approx}450 nm for x = 0.0 to {approx}100 nm for x = 0.1 prepared under the same conditions. The Neel temperature as well as the dielectric constant was also found to increase with the increase in lanthanum content. Lanthanum doping also enhanced the magnetic properties. Magnetization measurements above room temperature show a significant increase in magnetization at around 400 Degree-Sign C. Enhanced magnetic properties due to lanthanum doping are caused by the breakage of spin cycloid as observed by electron spin resonance study.

  10. Processing Techniques Developed to Fabricate Lanthanum Titanate Piezoceramic Material for High-Temperature Smart Structures

    NASA Technical Reports Server (NTRS)

    Goldsby, Jon C.; Farmer, Serene C.; Sayir, Ali

    2004-01-01

    Piezoelectric ceramic materials are potential candidates for use as actuators and sensors in intelligent gas turbine engines. For piezoceramics to be applied in gas turbine engines, they will have to be able to function in temperatures ranging from 1000 to 2500 F. However, the maximum use temperature for state-of-the-art piezoceramic materials is on the order of 300 to 400 F. Research activities have been initiated to develop high-temperature piezoceramic materials for gas turbine engine applications. Lanthanum titanate has been shown to have high-temperature piezoelectric properties with Curie temperatures of T(sub c) = 1500 C and use temperatures greater than 1000 C. However, the fabrication of lanthanum titanate poses serious challenges because of the very high sintering temperatures required for densification. Two different techniques have been developed at the NASA Glenn Research Center to fabricate dense lanthanum titanate piezoceramic material. In one approach, lower sintering temperatures were achieved by adding yttrium oxide to commercially available lanthanum titanate powder. Addition of only 0.1 mol% yttrium oxide lowered the sintering temperature by as much as 300 C, to just 1100 C, and dense lanthanum titanate was produced by pressure-assisted sintering. The second approach utilized the same commercially available powders but used an innovative sintering approach called differential sintering, which did not require any additive.

  11. Effective use of self-care fluoride administration in Asia.

    PubMed

    Zero, D T; Marinho, V C C; Phantumvanit, P

    2012-02-01

    The caries-preventive benefits of fluoride are generally accepted by dental researchers and practicing professionals worldwide. The benefits of fluoride toothpastes and mouthrinses have been supported by several high-quality systematic reviews. The formulation of a fluoride toothpaste and biological (salivary flow rate) and behavioral factors (brushing frequency, brushing time, post-brushing rinsing practices, timing of brushing, and amount of toothpaste applied) can influence anticaries efficacy. Fluoride mouthrinses have simpler formulations and can have better oral fluoride retention profiles than fluoride toothpastes, depending on post-brushing rinsing behaviors. Fluoride continues to be the mainstay of caries control; however, there is still the need to determine the most effective approach for fluoride utilization in children and adults who remain caries-active. PMID:22261258

  12. Removing Fluoride Ions with Continously Fed Activated Alumina.

    ERIC Educational Resources Information Center

    Wu, Yeun C.; Itemaking, Isara Cholapranee

    1979-01-01

    Discussed is the mathematical basis for determining fluoride removal during water treatment with activated alumina. The study indicates that decreasing particle size decreases the pore diffusion effect and increases fluoride removal. (AS)

  13. American Academy of Pediatrics. Fluoride supplementation. Committee on Nutrition.

    PubMed

    1986-05-01

    This statement reviews the rationale for the use of fluoride supplements for infants and children. The concept of fluoridation of water supplies as an effective and cost-beneficial method of reducing caries prevalence in the general population is strongly supported. In the absence of an adequately fluoridated water supply, fluoride supplements should be given to all children. This should begin at about 2 weeks of age; the dosage will depend on the concentration of fluoride in the local water supply. Fluoride-containing dentifrices are an important source of topical fluoride, but it is essential that parents be aware of the danger of excessive fluoride intake and that they teach their children to avoid swallowing toothpaste. PMID:3703642

  14. Altering the equilibrium condition in Sr-doped lanthanum manganite.

    SciTech Connect

    Carter, J. D.; Krumpelt, M.; Vaughey, J.; Wang, X.

    1999-05-28

    The material of choice for a solid oxide fuel cell cathode based on a yttria-stabilized zirconia (YSZ) electrolyte is doped lanthanum manganite, (La, Sr)MnO{sub 3}. It excels at many of the attributes necessary for a system to work at the required operating temperature and is flexible enough to allow for materials optimization. Although strontium-doping increases the electronic conductivity of the material, the ionic conductivity of the material remains negligible under operating conditions. Studies have shown that the internal equilibrium of the material heavily favors oxidation of the manganese and rather than the loss of lattice oxygen as a charge compensation mechanism. This lack of oxygen vacancies in the structure retards the ability of the material to conduct oxygen ions; thus the optimized system requires a large number of engineered triple point boundary locations to work efficiently. We have successfully doped the host LSM lattice to alter the interred equilibrium of the material to increase its ionic conductivity and thus lower the cathodic overpotential of the system. Our presentation will discuss these new materials, the results of cell tests, and a number of characterization experiments performed.

  15. Column biosorption of lanthanum and europium by Sargassum.

    PubMed

    Diniz, Vivian; Weber, Martin E; Volesky, Bohumil; Naja, Ghinwa

    2008-01-01

    Batch and column biosorption of La(3+) (lanthanum) and Eu(3+) (europium) was studied using protonated Sargassum polycystum biomass. The ion exchange sorption mechanism was confirmed by the proportional release of protons and by the total normality of the solution, which remained constant during the process. Equilibrium isotherms were determined for the binary systems, La/H and Eu/H for a total normality of 3 meq g(-1), which produced separation factors of 2.7 and 4.7, respectively, demonstrating a higher affinity of the biomass towards europium. Column runs with a single metal feed were used to estimate the intra-particle mass transfer coefficients for La and Eu (6.0 x 10(-4) and 3.7 x 10(-4) min(-1), respectively). Modeling batch and column binary systems with proton as the common ion was able to predict reasonably well the behavior of a ternary system containing protons. The software FEMLAB was used for solving the set of coupled partial differential equations. Moreover, a series of consecutive sorption/desorption runs demonstrated that the metal could be recovered and the biomass reused in multiple cycles by using 0.1N HCl with no apparent loss in the biosorbent metal uptake capacity. PMID:17707878

  16. Transport properties of silver-calcium doped lanthanum manganite

    NASA Astrophysics Data System (ADS)

    Cherif, B.; Rahmouni, H.; Smari, M.; Dhahri, E.; Moutia, N.; Khirouni, K.

    2015-01-01

    Electrical properties of silver-calcium doped lanthanum manganite (La0.5Ca0.5-xAgxMnO3 with 0.0

  17. The Bayo Canyon/radioactive lanthanum (RaLa) program

    SciTech Connect

    Dummer, J.E.; Taschner, J.C.; Courtright, C.C.

    1996-04-01

    LANL conducted 254 radioactive lanthanum (RaLa) implosion experiments Sept. 1944-March 1962, in order to test implosion designs for nuclear weapons. High explosives surrounding common metals (surrogates for Pu) and a radioactive source containing up to several thousand curies of La, were involved in each experiment. The resulting cloud was deposited as fallout, often to distances of several miles. This report was prepared to summarize existing records as an aid in evaluating the off-site impact, if any, of this 18-year program. The report provides a historical setting for the program, which was conducted in Technical Area 10, Bayo Canyon about 3 miles east of Los Alamos. A description of the site is followed by a discussion of collateral experiments conducted in 1950 by US Air Force for developing an airborne detector for tracking atmospheric nuclear weapons tests. All known off-site data from the RaLa program are tabulated and discussed. Besides the radiolanthanum, other potential trace radioactive material that may have been present in the fallout is discussed and amounts estimated. Off-site safety considerations are discussed; a preliminary off-site dose assessment is made. Bibliographical data on 33 persons important to the program are presented as footnotes.

  18. Removing Phosphorus from Aqueous Solutions Using Lanthanum Modified Pine Needles

    PubMed Central

    Wang, Xianze; Liu, Zhongmou; Liu, Jiancong; Huo, Mingxin; Huo, Hongliang; Yang, Wu

    2015-01-01

    The renewable pine needles was used as an adsorbent to remove phosphorus from aqueous solutions. Using batch experiments, pine needles pretreated with alkali-isopropanol (AI) failed to effectively remove phosphorus, while pine needles modified with lanthanum hydroxide (LH) showed relatively high removal efficiency. LH pine needles were effective at a wide pH ranges, with the highest removal efficiency reaching approximately 85% at a pH of 3. The removal efficiency was kept above 65% using 10 mg/L phosphorus solutions at desired pH values. There was no apparent significant competitive behavior between co-existing anions of sulfate, nitrate, and chloride (SO42-, NO3- and Cl-); however, CO32- exhibited increased interfering behavior as concentrations increased. An intraparticle diffusion model showed that the adsorption process occurred in three phases, suggesting that a boundary layer adsorption phenomena slightly affected the adsorption process, and that intraparticle diffusion was dominant. The adsorption process was thermodynamically unfavorable and non-spontaneous; temperature increases improved phosphorus removal. Total organic carbon (TOC) assays indicated that chemical modification reduced the release of soluble organic compounds from 135.6 mg/L to 7.76 mg/L. This new information about adsorption performances provides valuable information, and can inform future technological applications designed to remove phosphorus from aqueous solutions. PMID:26630014

  19. Performance of Lanthanum Strontium Manganite Electrodes at High Pressure

    SciTech Connect

    Thomsen, Edwin C.; Coffey, Greg W.; Pederson, Larry R.; Marina, Olga A.

    2009-06-15

    The high-pressure performance of lanthanum strontium manganite (LSM), LSM-zirconia, and LSM/ceria composite electrodes was studied by impedance spectroscopy and dc methods. Electrode resistances decreased in proportion to P(O2)1/2 for the LSM electrode in both cathodic and anodic directions to at least 100 atm, a decrease that was attributed to dissociative oxygen adsorption, surface diffusion, and related phenomena. For the LSM-20/zirconia composite electrode, resistances decreased in proportion to P(O2)1/4 across the entire pressure range considered. Two principal features appeared in the impedance spectra, one that showed a P(O2)1/4 dependence attributed to charge transfer reactions, and one that was nearly pressure-independent, possibly due to transport in the zirconia portion of the composite. For the LSM-20/ceria composite electrode, resistances decreased as P(O2)0.3-0.4 at high pressure, depending on temperature. Two features appeared in the impedance spectra: one at low to intermediate frequency having a P(O2)1/2 dependence and one at high frequency having a P(O2)1/4 dependence. These features are attributed to dissociative oxygen adsorption and to charge transfer reactions, respectively. Results suggest that cathodic losses can be substantially lowered by operation of solid oxide fuel cells at greater than ambient pressure.

  20. Ecotoxicological assessment of lanthanum with Caenorhabditis elegans in liquid medium.

    PubMed

    Zhang, Haifeng; He, Xiao; Bai, Wei; Guo, Xiaomei; Zhang, Zhiyong; Chai, Zhifang; Zhao, Yuliang

    2010-12-01

    With their widespread applications in industry, agriculture and many other fields, more and more rare earth elements (REEs) are getting into the environment, especially the aquatic systems. Therefore, understanding the aquatic ecotoxicity of REEs has become more and more important. In the present work, Caenorhabditis elegans (C. elegans) was used as a test organism and life-cycle endpoints were chosen along with elemental assay to evaluate the aquatic toxicity of lanthanum (La), a representative of REEs. The results show La³+ had significant adverse effects on the growth and reproduction of worms above a concentration of 10 μmol L⁻¹. The elemental mapping by microbeam synchrotron radiation X-ray fluorescence (μ-SRXRF) illustrated how La treatment disturbed the metals distribution in the whole body of a single tiny nematode at lower levels. Our results suggested that the high-level REEs in some polluted water bodies would lead to an aquatic ecological crisis. The assessment we performed in the present work could be developed as a standardized test design for aquatic toxicological research. PMID:21510015

  1. Work function measurement of lanthanum-boron compounds

    NASA Technical Reports Server (NTRS)

    Jacobson, D. L.; Storms, E. K.

    1978-01-01

    The relationship between emission properties and sample composition is studied for lanthanum-boron compounds. Specifically, the La-B system is considered between 1400 and 2100 K and between LaB(4.24) and LaB(29.2) to determine the phase relationship, chemical activity of the compounds, vapor composition, and vaporization rate. The results indicate that: (1) a blue-colored phase near LaB(9) exists between a purple-colored LaB(6) and elemental boron, (2) vaporization is sufficiently more rapid than diffusion so that great compositional differences exist between the surface and the interior, (3) an activation energy lowers the boron vaporization rate from LaB(6), and (4) a steady-state surface composition between LaB(6.04) and LaB(6.07) exists for freely vaporizing materials as a function of interior composition, purity, and temperature. It is noted that the ultimate life of a thermionic diode is governed by electrode vaporization rate whereas efficiency is governed by the electrode work function.

  2. Proton-Proton Correlation in Central Collisions of Lanthanum + Lanthanum at 1.2 Gev/a

    NASA Astrophysics Data System (ADS)

    Chang, James W.

    1992-01-01

    Central collisions between 1.2 GeV/A lanthanum projectiles and lanthanum nuclei are analysed for HBT-based proton-proton (pp) correlation. The La + La collision system is unique in that it has both the largest beam and beam + target size in any of the pp correlation analyses performed. The data is obtained from LBL's BEVALAC experiment E684HX. The time-of-flight system also with the Heavy Ion Spectrometer System (HISS) allows identification of protons at average mass resolution of 40.6 MeV (5%). The systematic background is removed from the correlation by the event-mixing method. The correlation from data is compared to the calculated correlation which uses a Gaussian source distribution and pp wavefunction resulting from Fermi statistics, S-wave Reid soft-core nuclear potential, and full Coulomb potential. The RMS radius of the La + La system is found to be 4.90 +/- 0.22 fm when systematic corrections are applied. When this radius (r_sp{RMS}{p }) is compared to the radius obtained using pion-pion correlation on the same data (r_sp {RMS}{pi} = 7.31 +/- 0.29 fm), it is found that the r _sp{RMS}{p}/r_sp{RMS }{pi} ratio is 0.67. Survey of other proton and pion correlation results from same systems reveal that r_sp{RMS} {p} < r_sp{RMS}{pi } in general, with the ratio r_sp {RMS}{p}/r_sp{RMS} {pi} decreasing with increase in colliding system size. Survey of pp correlation results from other experiments are considered to test the bore -cut and billiard-ball models. It is found that when the system is large (A_{total} > 118), the bore-cut model underestimates the size, and the billiard-ball model overestimates the size. The billiard -ball model looks attractive due to the smoothness of the transition between correct size estimation and overestimation. A conjecture is made that if this model is true, then the over-estimation of size may be a signature of nucleon density increase at large colliding systems. Compromise scenarios between the bore-cut and billiard-ball models

  3. FLUORIDE: A REVIEW OF USE AND EFFECTS ON HEALTH

    PubMed Central

    Kanduti, Domen; Sterbenk, Petra; Artnik, Barbara

    2016-01-01

    Introduction: Appropriate oral health care is fundamental for any individual’s health. Dental caries is still one of the major public health problems. The most effective way of caries prevention is the use of fluoride. Aim: The aim of our research was to review the literature about fluoride toxicity and to inform physicians, dentists and public health specialists whether fluoride use is expedient and safe. Methods: Data we used in our review were systematically searched and collected from web pages and documents published from different international institutions. Results: Fluoride occurs naturally in our environment but we consume it in small amounts. Exposure can occur through dietary intake, respiration and fluoride supplements. The most important factor for fluoride presence in alimentation is fluoridated water. Methods, which led to greater fluoride exposure and lowered caries prevalence, are considered to be one of the greatest accomplishments in the 20th century`s public dental health. During pregnancy, the placenta acts as a barrier. The fluoride, therefore, crosses the placenta in low concentrations. Fluoride can be transmitted through the plasma into the mother’s milk; however, the concentration is low. The most important action of fluoride is topical, when it is present in the saliva in the appropriate concentration. The most important effect of fluoride on caries incidence is through its role in the process of remineralization and demineralization of tooth enamel. Acute toxicity can occur after ingesting one or more doses of fluoride over a short time period which then leads to poisoning. Today, poisoning is mainly due to unsupervised ingestion of products for dental and oral hygiene and over-fluoridated water. Conclusion: Even though fluoride can be toxic in extremely high concentrations, it`s topical use is safe. The European Academy of Paediatric Dentistry (EAPD) recommends a preventive topical use of fluoride supplements because of their

  4. A study of fluoride groundwater occurrence in Nathenje, Lilongwe, Malawi

    NASA Astrophysics Data System (ADS)

    Msonda, K. W. M.; Masamba, W. R. L.; Fabiano, E.

    A study was carried out to determine fluoride concentration in groundwaters of Nathenje area situated in Lilongwe District in the central region of Malawi. Water samples were collected from 176 boreholes and shallow wells during different months in 2001 and 2002. Samples were then analysed for fluoride by using a fluoride electrode and an ion selective meter. The results showed that fluoride concentrations for the rainy season varied from <0.5 to 6.98 ± 0.01 mg/l with 52.9% of the boreholes above the World Health Organisation (WHO) maximum permissible limit of 1.5 mg/l. Fluoride concentrations for dry season ranged from <0.5 to 7.02 ± 0.02 mg/l with 50.8% of boreholes above 1.5 mg/l. Fluoride concentrations for the two seasons were significantly different from each other ( p < 0.05). Fluoride data was used to produce a fluoride distribution map. From the map, it was observed that fluoride concentrations in this area followed a pattern. The central part of Nathenje had high fluoride concentration of between 2 and 7.02 mg/l and these high fluoride values seemed to extend eastwards beyond the boundary of the study area. However, the southern and western parts had <1 mg/l of fluoride. The high groundwater fluoride values seem to be associated with the weathered basement complex containing biotite that is a probable source of fluoride. The other suspected sources of fluoride in Nathenje groundwater could be due to the dissolution of hornblende, fluorite and amphibole, which are reported to occur in rocks and soils in this area. There was evidence of dental fluorosis in areas where the fluoride concentration was high.

  5. Pharmacokinetics of fluoride in toddlers after application of 5% sodium fluoride dental varnish.

    PubMed

    Milgrom, Peter; Taves, Donald M; Kim, Amy S; Watson, Gene E; Horst, Jeremy A

    2014-09-01

    The prevalence of dental caries (tooth decay) among preschool children is increasing, driven partially by an earlier age of onset of carious lesions. The American Academy of Pediatrics recommends application of 5% sodium fluoride varnish at intervals increasing with caries risk status, as soon as teeth are present. However, the varnishes are marketed for treatment of tooth sensitivity and are regulated as medical devices rather than approved by the US Food and Drug Administration for prevention of dental caries (tooth decay). The objective of this research is to examine the safety of use in toddlers by characterizing the absorption and distribution profile of a currently marketed fluoride varnish. We measured urinary fluoride for 5 hours after application of fluoride varnish to teeth in 6 toddlers aged 12 to 15 months. Baseline levels were measured on a separate day. The urine was extracted from disposable diapers, measured by rapid diffusion, and extrapolated to plasma levels. The mean estimated plasma fluoride concentration was 13 μg/L (SD, 9 μg/L) during the baseline visit and 21 μg/L (SD, 8 μg/L) during the 5 hours after treatment. Mean estimated peak plasma fluoride after treatment was 57 μg/L (SD, 22 μg/L), and 20 μg/kg (SD, 4 μg/L) was retained on average. Retained fluoride was 253 times lower than the acute toxic dose of 5 mg/kg. Mean plasma fluoride after placement of varnish was within an SD of control levels. Occasional application of fluoride varnish following American Academy of Pediatrics guidance is safe for toddlers. PMID:25136045

  6. Changes in plaque fluoride levels by school-based fluoride rinsing and tablet programs in Bangladesh.

    PubMed

    Hossain, Abu Nasir Mohammad Nazmul; Sampaio, Fabio Correia; von der Fehr, Frithjof Ramm; Arneberg, Pål

    2003-02-01

    The aim of this study was to evaluate the effects of school-based fluoride rinsing and tablet programs on plaque fluoride levels. A total of 42 children (8-9 years) were selected from two neighboring schools in Dhaka, Bangladesh. After caries recordings, vestibular plaque samples from the maxillary central incisors and mandibular first molars were collected and frozen on day 0 (baseline). The subjects of one school (rinsing group, n = 15) rinsed with 0.05% NaF, while those from the other school (tablet group, n = 16) used a 0.5 mg F tablet on the 5 school days during a 3-week period. The surfaces were sampled on the first and last school day every week. The fluoride and protein contents of each sample were analyzed using micro-techniques. The median plaque fluoride levels were 9.1 ppm at baseline in the rinsing group and 2.5 ppm in the tablet group (P < 0.05). This difference could in part be related to reported fluoride toothpaste usage. After 4 days on the fluoride programs, plaque fluoride levels in the rinsing group increased to 27.3, 24.5 and 14.2 ppm in the 3 consecutive weeks. The corresponding values after tablet usage were 8.0, 6.5 and 7.1 ppm, respectively. After 3 days without fluoride during the weekends, levels declined towards baseline values in both groups. Hence, the plaque fluoride levels in 8 to 9-year-old Bangladeshi children were increased by both rinsing and tablet programs, but the effect was not detectable 3 days later. PMID:12635779

  7. Effect of production conditions on the corrosion resistance of lanthanum hexaboride powders and parts made from them

    SciTech Connect

    Paderno, Y.B.; Dudnik, E.M.; Masyuk, T.V.; Tkasch, A.V.; Zaitseva, A.Z.

    1985-10-01

    The authors studied the effect of chemical and thermal treatments of an industrial LaB6 powder on the corrosion resistance of the powder itself and parts pressed hot from it. To start, two batches of an industrial lanthanum hexaboride powder were used; and any boron oxide present removed by washing the powders with warm distilled water. To free the powders of lanthanum borates and lanthanum oxide, the powders were treated with a hydrochloric acid solution. The authors determine that this hydrochloric acid cleaning method is an effective means of ridding an industrial lanthanum hexaboride powder of impurities. It is also shown that acid treatment of industrial LaB6 powders substantially improves the corrosion resistance of parts made from them by powder metallurgy techniques. Also, a mechanism of rupture of hotpressed and sintered lanthanum hexaboride parts is proposed.

  8. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  9. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  10. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.212 Section... Industry: Superphosphoric Acid Plants § 60.212 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 5.0 g/megagram (Mg) of equivalent P2O5...

  11. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.232 Section... Industry: Triple Superphosphate Plants § 60.232 Standard for fluorides. On and after the date on which the... gases which contain total fluorides in excess of 100 g/megagram (Mg) of equivalent P2O5 feed (0.20...

  12. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  13. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  14. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  15. 40 CFR 60.212 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.212 Section... Industry: Superphosphoric Acid Plants § 60.212 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 5.0 g/megagram (Mg) of equivalent P2O5...

  16. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  17. 40 CFR 60.232 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.232 Section... Industry: Triple Superphosphate Plants § 60.232 Standard for fluorides. On and after the date on which the... gases which contain total fluorides in excess of 100 g/megagram (Mg) of equivalent P2O5 feed (0.20...

  18. 40 CFR 60.242 - Standard for fluorides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Standard for fluorides. 60.242 Section... Industry: Granular Triple Superphosphate Storage Facilities § 60.242 Standard for fluorides. (a) On and... atmosphere from any affected facility any gases which contain total fluorides in excess of 0.25...

  19. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.222 Section... Industry: Diammonium Phosphate Plants § 60.222 Standard for fluorides. (a) On and after the date on which... facility any gases which contain total fluorides in excess of 30 g/megagram (Mg) of equivalent P2O5 feed...

  20. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Vinyl fluoride, stabilized. 179.102-4 Section 179... Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-4 Vinyl fluoride, stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following...

  1. COMPLEX FLUORIDES OF PLUTONIUM AND AN ALKALI METAL

    DOEpatents

    Seaborg, G.T.

    1960-08-01

    A method is given for precipitating alkali metal plutonium fluorides. such as KPuF/sub 5/, KPu/sub 2/F/sub 9/, NaPuF/sub 5/, and RbPuF/sub 5/, from an aqueous plutonium(IV) solution by adding hydrogen fluoride and alkali-metal- fluoride.

  2. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  3. 21 CFR 177.2510 - Polyvinylidene fluoride resins.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Polyvinylidene fluoride resins. 177.2510 Section... as Components of Articles Intended for Repeated Use § 177.2510 Polyvinylidene fluoride resins. Polyvinylidene fluoride resins may be safely used as articles or components of articles intended for repeated...

  4. 40 CFR 180.575 - Sulfuryl fluoride; tolerances for residues.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Sulfuryl fluoride; tolerances for... § 180.575 Sulfuryl fluoride; tolerances for residues. (a)(1) General. Tolerances are established for residues of sulfuryl fluoride in or on the following commodities from the postharvest fumigation...

  5. Fluoride inhibition of proton-translocating ATPases of oral bacteria.

    PubMed Central

    Sutton, S V; Bender, G R; Marquis, R E

    1987-01-01

    The ATPases of isolated membranes of lactic acid bacteria were found to be inhibited by fluoride in a complex manner. Among the enzymes tested, that of Streptococcus mutans GS-5 was the most sensitive to fluoride, and the initial rate of hydrolysis of ATP was reduced 50% by approximately 3 mM fluoride. The enzyme of Lactobacillus casei ATCC 4646 was the most resistant, and about 25 mM fluoride was required for 50% inhibition. The response to fluoride appeared to involve reversible, noncompetitive inhibition during short exposure to low levels of fluoride and nonreversible inhibition at higher fluoride levels. In addition, kinetic studies of the effects of fluoride on the enzymes of membranes of S. mutans and L. casei indicated that reversible inhibition was at least partly overcome at high levels of either ATP or Mg. The effects of pH on fluoride inhibition of ATPases were markedly different from the effects of pH on inhibition of acid/base regulation of intact cells by fluoride. It appeared that formation of HF was not required for inhibition of the ATPases. F1 ATPases isolated from the membranes by washing with buffers of low ionic strength proved to be less sensitive to fluoride than the membrane-associated F1F0 holoenzymes, and it was concluded that the F0 or membrane sector of the holoenzyme is involved in fluoride inhibition. PMID:2889674

  6. Eutrophication management in surface waters using lanthanum modified bentonite: A review.

    PubMed

    Copetti, Diego; Finsterle, Karin; Marziali, Laura; Stefani, Fabrizio; Tartari, Gianni; Douglas, Grant; Reitzel, Kasper; Spears, Bryan M; Winfield, Ian J; Crosa, Giuseppe; D'Haese, Patrick; Yasseri, Said; Lürling, Miquel

    2016-06-15

    This paper reviews the scientific knowledge on the use of a lanthanum modified bentonite (LMB) to manage eutrophication in surface water. The LMB has been applied in around 200 environments worldwide and it has undergone extensive testing at laboratory, mesocosm, and whole lake scales. The available data underline a high efficiency for phosphorus binding. This efficiency can be limited by the presence of humic substances and competing oxyanions. Lanthanum concentrations detected during a LMB application are generally below acute toxicological threshold of different organisms, except in low alkalinity waters. To date there are no indications for long-term negative effects on LMB treated ecosystems, but issues related to La accumulation, increase of suspended solids and drastic resources depletion still need to be explored, in particular for sediment dwelling organisms. Application of LMB in saline waters need a careful risk evaluation due to potential lanthanum release. PMID:26706125

  7. Improved chemical stability and conductivity of barium cerate nanopowders by Lanthanum doping.

    PubMed

    Lee, Hunhyeong; Park, Inyu; Shin, Dongwook

    2013-09-01

    Despite of the highest proton conductivity, barium cerate electrolytes are well known for the deficiency of chemical stability at elevated temperature under CO2 atmosphere. This work is focused on improving chemical stability of lanthanum doped barium cerate (BCL) powder for electrolyte. Although lanthanum doping causes distortion of perovskite structure lattice, immoderate doping could stabilize structure due to increasing symmetry of structure lattices. The thermogravimetric analysis and AC impedance measurements revealed that the lanthanum doping suppresses the reaction between barium and carbonate and this effect results in sufficient improvement in ionic conductivity in operating temperatures range. It was confirmed that BaCe0.7La0.3O3-delta (BCL30) was the most stable composition and the conductivity of BCL30 is high as 3.8 S x cm(-1) x K at 700 degrees C. PMID:24205607

  8. Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process

    NASA Astrophysics Data System (ADS)

    Mishra, S. K.; Jagdeesh, N.; Pathak, L. C.

    2016-07-01

    The present manuscript discusses our findings on fabrication of nanosized lanthanum zirconate powder for thermal barrier coating application and its coating by plasma spray on nickel-based superalloy substrate. Single-phase La2Zr2O7 coating of thickness of the order of 45 µm on the Ni-Cr-Al bond coat coated Ni-based superalloy substrate was deposited by plasma spray process. The layers at the interface did not show spallation and inter diffusion was very less. The microstructure, interface, porosity, and mechanical properties of different layers are investigated. The lanthanum zirconate hardness and modulus were 10.5 and 277 GPa, respectively. The load depth curve for lanthanum zirconate showed good elastic recovery around 74%.

  9. Eucalyptus tolerance mechanisms to lanthanum and cerium: subcellular distribution, antioxidant system and thiol pools.

    PubMed

    Shen, Yichang; Zhang, Shirong; Li, Sen; Xu, Xiaoxun; Jia, Yongxia; Gong, Guoshu

    2014-12-01

    Guanglin 9 (Eucalyptus grandis × Eucalyptus urophlla) and Eucalyptus grandis 5 are two eucalyptus species which have been found to grow normally in soils contaminated with lanthanum and cerium, but the tolerance mechanisms are not clear yet. In this study, a pot experiment was conducted to investigate the tolerance mechanisms of the eucalyptus to lanthanum and cerium. Cell walls stored 45.40-63.44% of the metals under lanthanum or cerium stress. Peroxidase and catalase activities enhanced with increasing soil La or Ce concentrations up to 200 mg kg(-1), while there were no obvious changes in glutathione and ascorbate concentrations. Non-protein thiols concentrations increased with increasing treatment levels up to 200 mg kg(-1), and then decreased. Phytochelatins concentrations continued to increase under La or Ce stress. Therefore, the two eucalyptus species are La and Ce tolerant plants, and the tolerance mechanisms include cell wall deposition, antioxidant system response, and thiol compound synthesis. PMID:25303462

  10. Effects of verapamil, dantrolene and lanthanum on catecholamine release from rat adrenal medulla.

    PubMed Central

    Cohen, J; Gutman, Y

    1979-01-01

    1. The release of catecholamines (CA) from rat adrenal incubated in vivo in Locke solution was studied. 2. Acetylcholine-induced release of CA and CA release by 56 mM KCl were inhibited by verapamil and lanthanum chloride which block calcium permeability. 3. CA secretion induced by salbutamol or by theophylline was unaffected by either verapamil or lanthanum chloride. 4. Dantrolene-sodium inhibited the CA secretion induced by theophylline but only partially reduced potassium-induced release of CA. 5. Verapamil enhanced the secretion of CA induced by salbutamol (in a calcium-free medium). 6. Tyramine-induced secretion of CA was unaffected by lanthanum chloride, verapamil or dantrolene-sodium. 7. It is suggested that cyclic adenosine 3',5'-monophosphate-mediated CA secretion (induced by theophylline or salbutamol) depends on release of calcium from intracellular stores, and that CA secretion induced by tyramine is independent of intra- or extracellular calcium. PMID:435689

  11. Fabrication of Nanosized Lanthanum Zirconate Powder and Deposition of Thermal Barrier Coating by Plasma Spray Process

    NASA Astrophysics Data System (ADS)

    Mishra, S. K.; Jagdeesh, N.; Pathak, L. C.

    2016-05-01

    The present manuscript discusses our findings on fabrication of nanosized lanthanum zirconate powder for thermal barrier coating application and its coating by plasma spray on nickel-based superalloy substrate. Single-phase La2Zr2O7 coating of thickness of the order of 45 µm on the Ni-Cr-Al bond coat coated Ni-based superalloy substrate was deposited by plasma spray process. The layers at the interface did not show spallation and inter diffusion was very less. The microstructure, interface, porosity, and mechanical properties of different layers are investigated. The lanthanum zirconate hardness and modulus were 10.5 and 277 GPa, respectively. The load depth curve for lanthanum zirconate showed good elastic recovery around 74%.

  12. Nanocomposite Lanthanum Zirconate Thermal Barrier Coating Deposited by Suspension Plasma Spray Process

    NASA Astrophysics Data System (ADS)

    Wang, Chaohui; Wang, You; Wang, Liang; Hao, Guangzhao; Sun, Xiaoguang; Shan, Fan; Zou, Zhiwei

    2014-10-01

    This work seeks to develop an innovative nanocomposite thermal barrier coating (TBC) exhibiting low thermal conductivity and high durability compared with that of current TBCs. To achieve this objective, nanosized lanthanum zirconate particles were selected for the topcoat of the TBC system, and a new process—suspension plasma spray—was employed to produce desirable microstructural features: the nanocomposite lanthanum zirconate TBC contains ultrafine splats and high volume porosity, for lower thermal conductivity, and better durability. The parameters of plasma spray experiment included two main variables: (i) spray distance varying from 40 to 80 mm and (ii) the concentration of suspension 20, 25, and 30 wt.%, respectively. The microstructure of obtained coatings was characterized with scanning electron microscope and x-ray diffraction. The porosity of coatings is in the range of 6-10%, and the single phase in the as-sprayed coatings was pyrochlore lanthanum zirconate.

  13. Lanthanum phosphate deposition in the gastric mucosa of patients with chronic renal failure.

    PubMed

    Iwamuro, Masaya; Kanzaki, Hiromitzu; Tanaka, Takehiro; Kawano, Seiji; Kawahara, Yoshiro; Okada, Hiroyuki

    2016-07-01

    A 77-year-old Japanese man underwent endoscopic submucosal dissection twice over a 5-year period for the treatment of two separate early gastric cancers. He had been taking lanthanum carbonate, an orally administered phosphate binder, for 3 years. Esophagogastroduodenoscopy revealed reddish mucosa in the greater curvature and anterior wall of the gastric angle, while granular, white deposits were also observed in some areas of this reddish mucosa. Additionally, biopsy specimens from the gastric mucosa revealed the deposition of fine, amorphous, eosinophilic material, which appeared bright on scanning electron microscopy. Energy dispersive X-ray spectroscopy revealed the presence of lanthanum and phosphate in these bright areas, and elemental mapping confirmed that their distribution was identical to that seen in the bright areas. Based on these findings, the diagnosis of lanthanum phosphate deposition in the gastric mucosa was determined. PMID:27383105

  14. Graphite Fluoride Fiber Composites For Heat Sinking

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheh; Long, Martin; Stahl, Mark

    1989-01-01

    Graphite fluoride fiber/polymer composite materials consist of graphite fluoride fibers in epoxy, polytetrafluoroethylene, or polyimide resin. Combines high electrical resistivity with high thermal conductivity and solves heat-transfer problems of many electrical systems. Commercially available in powder form, for use as dry lubricant or cathode material in lithium batteries. Produced by direct fluorination of graphite powder at temperature of 400 to 650 degree C. Applications include printed-circuit boards for high-density power electronics, insulators for magnetic-field cores like those found in alternators and transformers, substrates for thin-film resistors, and electrical-protection layers in aircraft de-icers.

  15. The effect of sevelamer carbonate and lanthanum carbonate on the pharmacokinetics of oral calcitriol

    PubMed Central

    Pierce, David; Hossack, Stuart; Poole, Lynne; Robinson, Antoine; Van Heusen, Heather; Martin, Patrick; Smyth, Michael

    2011-01-01

    Background. Lanthanum carbonate and sevelamer carbonate are non-calcium-based phosphate binders used to manage hyperphosphataemia in patients with chronic kidney disease (CKD). Patients with CKD may require intravenous or oral active vitamin D. We investigated the effects of lanthanum carbonate and sevelamer carbonate on the bioavailability of oral calcitriol. Methods. This was a three-period, crossover study in healthy volunteers. Forty-one individuals were randomized to one of six possible sequences, each consisting of three treatment periods separated by washouts. The treatments were calcitriol (1 μg at lunch), calcitriol with lanthanum carbonate (3000 mg/day) and calcitriol with sevelamer carbonate (7200 mg/day). Serum calcitriol levels were assessed at baseline and throughout the study. Results. Co-administration of lanthanum carbonate with calcitriol had no significant effect on area under the curve over 48 h (AUC0–48) for serum exogenous calcitriol [least-squares (LS) mean, calcitriol with lanthanum carbonate vs calcitriol alone: 429 pg h/mL vs 318 pg h/mL, respectively; P = 0.171]. Similarly, there was no significant effect on maximum concentration (Cmax). In contrast, co-administration with sevelamer was associated with a significant reduction in bioavailability parameters for calcitriol (calcitriol with sevelamer carbonate vs calcitriol alone, LS mean AUC0–48: 137 pg h/mL vs 318 pg h/mL, respectively; P = 0.024; LS mean Cmax: 40.1 pg/mL vs 49.7 pg/mL, respectively; P < 0.001). Conclusions. Sevelamer carbonate significantly reduces serum concentrations of exogenous calcitriol when administered concomitantly with oral calcitriol, whereas lanthanum carbonate has no significant effect. This should be considered when treating CKD patients who require phosphate binders and oral vitamin D. PMID:20921291

  16. Reconstructing temporal variation of fluoride uptake in eastern grey kangaroos (Macropus giganteus) from a high-fluoride area by analysis of fluoride distribution in dentine.

    PubMed

    Kierdorf, Horst; Rhede, Dieter; Death, Clare; Hufschmid, Jasmin; Kierdorf, Uwe

    2016-04-01

    Trace element profiling in the incrementally formed dentine of mammalian teeth can be applied to reconstruct temporal variation of incorporation of these elements into the tissue. Using an electron microprobe, this study analysed fluoride distribution in dentine of first and third mandibular molars of free-ranging eastern grey kangaroos inhabiting a high-fluoride area, to assess temporal variation in fluoride uptake of the animals. Fluoride content in the early-formed dentine of first molars was significantly lower than in the late-formed dentine of these teeth, and was also lower than in both, the early and the late-formed dentine of third molars. As early dentine formation in M1 takes place prior to weaning, this finding indicates a lower dentinal fluoride uptake during the pre-weaning compared to the post-weaning period. This is hypothetically attributed to the action of a partial barrier to fluoride transfer from blood to milk in lactating females and a low bioavailability of fluoride ingested together with milk. Another factor contributing to lower plasma fluoride levels in juveniles compared to adults is the rapid clearance of fluoride from blood plasma in the former due to their intense skeletal growth. The combined action of these mechanisms is considered to explain why in kangaroos from high-fluoride areas, the (early-formed) first molars are not affected by dental fluorosis while the (later-formed) third and fourth molars regularly exhibit marked to severe fluorotic lesions. PMID:26736058

  17. Equilibrium distribution of lanthanum, neodymium, and thorium between lithium chloride melt and liquid bismuth

    NASA Astrophysics Data System (ADS)

    Zagnit'ko, A. V.; Ignat'ev, V. V.

    2013-04-01

    The distribution of lanthanum, neodymium, and thorium between a lithium chloride melt and liquid bismuth with additions of lithium as a reducing agent are investigated at 650°C. Equilibrium values of their distribution constants are measured. It is shown that in contrast to neodymium and lanthanum, thorium cannot be extracted from bismuth into lithium chloride. This allows us to propose an efficient scheme for separating lanthanides and thorium in a system for the extraction of fuel salts in molten-salt nuclear reactors.

  18. High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1974-01-01

    Lanthanum hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium diode performance should result from the lower collector temperatures allowed for earth and low power space duties. Decreased temperatures will lessen thermal transport losses that attend thermionic conversion mechanisms. Such advantages will add to those from collector Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high efficiency, low temperature cesium diodes with lanthanum hexaboride electrodes appear feasible.

  19. Selective isotope determination of lanthanum by diode-laser-initiated resonance-ionization mass spectrometry

    NASA Astrophysics Data System (ADS)

    Young, J. P.; Shaw, R. W.

    1995-08-01

    A diode-laser step has been incorporated into a resonance-ionization mass spectrometry optical excitation process to enhance the isotopic selectivity of the technique. Lanthanum isotope ratio enhancements as high as 103 were achieved by use of a single-frequency cw diode laser tuned to excite the first step of a three-step excitation-ionization optical process; the subsequent steps were excited by use of a pulsed dye laser. Applying the same optical technique, we measured atomic hyperfine constants for the high-lying even-parity 4D5/2 state of lanthanum at 30354 cm-1 . The general utility of this spectral approach is discussed.

  20. LaZnB(5)O(10), the first lanthanum zinc borate.

    PubMed

    Jiao, Zhi-Wei; Wang, Ru-Ji; Wang, Xiao-Qing; Shen, De-Zhong; Shen, Guang-Qiu

    2009-01-01

    Lanthanum zinc penta-borate, LaZnB(5)O(10), was synthesized by flux-supported solid-state reaction. It is a member of the LnMB(5)O(10) (Ln = rare earth ion and M = divalent metal ion) structure type. The crystal shows a three-dimensional structure constructed from two-dimensional {[B(5)O(10)](5-)}(n) layers with the lanthanum (coordination number nine) and zinc (coordination number six) ions filling in the inter-layers. PMID:21579905

  1. Some electronic and magnetic properties of Fluoride ion in Fluoride structure nanocrystals

    NASA Astrophysics Data System (ADS)

    Imtani, Ali Nasir

    2012-01-01

    We have investigated the effects of the environment potential around Fluoride ion on some important electronic and magnetic properties such as dipole polarisability, moment of oscillator strengths S(k) and magnetic susceptibility. The theoretical procedure is based on the variational-perturbation theory with two parameter trial functions incorporated in an ionic model. We estimate these properties in four cases for Fluoride ion; free ion, ion under different potentials, ion in the crystals and ion in nanocrystal, CdF2, CaF2, PbF2, SrF2 and BaF2. Our results indicate that these properties vary with ion environments and the free state of Fluoride ion has higher values and there is linearity behaviour of these properties with lattice constant. For Fluoride ion in nanocrystal, we have found that there is an extra parameter that can also affect the dipole polarisability, the number of ions in the structure.

  2. Plaque fluoride concentrations in a community without water fluoridation: effects of calcium and use of a fluoride or placebo dentifrice.

    PubMed

    Whitford, G M; Buzalaf, M A R; Bijella, M F B; Waller, J L

    2005-01-01

    The results of a recent study by Whitford et al. [Caries Res 2002;36:256-265] with subjects whose drinking water was fluoridated led to two major conclusions: (1) Compared to the use of a placebo dentifrice, plaque fluoride concentrations ([F]) throughout much of the day are not significantly increased by the use of an F dentifrice but (2) they are positively related to plaque [Ca] (p = 0.0001). The present double-blind, double-crossover study with 16 subjects used the same protocol and was done to: (1) determine the effects of the use of an F dentifrice on salivary and plaque [F] in a community without water fluoridation and (2) further examine the relationship between plaque [Ca] and [F]. Following the use of an F dentifrice or placebo for one week, whole saliva and plaque were collected 1.0 and 12 h after the last use of the products. The study was repeated to include rinsing with a 20 mmol/l CaCl(2) solution immediately before the use of the dentifrices. The CaCl(2) rinse had only minor effects on salivary [Ca] and [F] and none on the plaque concentrations. Unlike the results found in the fluoridated community, all salivary and plaque [F] associated with the use of the F dentifrice were significantly higher than those associated with the use of the placebo. The results suggest that the cariostatic effectiveness of an F dentifrice should be greater in areas without water fluoridation. As noted previously, plaque [F] were positively related to plaque [Ca] (p = 0.0001). PMID:15741721

  3. Fluoride geochemistry of thermal waters in Yellowstone National Park: I. Aqueous fluoride speciation

    NASA Astrophysics Data System (ADS)

    Deng, Yamin; Nordstrom, D. Kirk; Blaine McCleskey, R.

    2011-08-01

    Thermal water samples from Yellowstone National Park (YNP) have a wide range of pH (1-10), temperature, and high concentrations of fluoride (up to 50 mg/l). High fluoride concentrations are found in waters with field pH higher than 6 (except those in Crater Hills) and temperatures higher than 50 °C based on data from more than 750 water samples covering most thermal areas in YNP from 1975 to 2008. In this study, more than 140 water samples from YNP collected in 2006-2009 were analyzed for free-fluoride activity by ion-selective electrode (ISE) method as an independent check on the reliability of fluoride speciation calculations. The free to total fluoride concentration ratio ranged from <1% at low pH values to >99% at high pH. The wide range in fluoride activity can be explained by strong complexing with H + and Al 3+ under acidic conditions and lack of complexing under basic conditions. Differences between the free-fluoride activities calculated with the WATEQ4F code and those measured by ISE were within 0.3-30% for more than 90% of samples at or above 10 -6 molar, providing corroboration for chemical speciation models for a wide range of pH and chemistry of YNP thermal waters. Calculated speciation results show that free fluoride, F -, and major complexes ( HF(aq)0, AlF 2+, AlF2+ and AlF30) account for more than 95% of total fluoride. Occasionally, some complex species like AlF4-, FeF 2+, FeF2+, MgF + and BF(OH)2- may comprise 1-10% when the concentrations of the appropriate components are high. According to the simulation results by PHREEQC and calculated results, the ratio of main fluoride species to total fluoride varies as a function of pH and the concentrations and ratios of F and Al.

  4. Fluoride geochemistry of thermal waters in Yellowstone National Park: I. Aqueous fluoride speciation

    USGS Publications Warehouse

    Deng, Y.; Nordstrom, D.K.; Blaine, McCleskey R.

    2011-01-01

    Thermal water samples from Yellowstone National Park (YNP) have a wide range of pH (1-10), temperature, and high concentrations of fluoride (up to 50mg/l). High fluoride concentrations are found in waters with field pH higher than 6 (except those in Crater Hills) and temperatures higher than 50??C based on data from more than 750 water samples covering most thermal areas in YNP from 1975 to 2008. In this study, more than 140 water samples from YNP collected in 2006-2009 were analyzed for free-fluoride activity by ion-selective electrode (ISE) method as an independent check on the reliability of fluoride speciation calculations. The free to total fluoride concentration ratio ranged from <1% at low pH values to >99% at high pH. The wide range in fluoride activity can be explained by strong complexing with H+ and Al3+ under acidic conditions and lack of complexing under basic conditions. Differences between the free-fluoride activities calculated with the WATEQ4F code and those measured by ISE were within 0.3-30% for more than 90% of samples at or above 10-6 molar, providing corroboration for chemical speciation models for a wide range of pH and chemistry of YNP thermal waters. Calculated speciation results show that free fluoride, F-, and major complexes (HF(aq)0, AlF2+, AlF2+ and AlF30) account for more than 95% of total fluoride. Occasionally, some complex species like AlF4-, FeF2+, FeF2+, MgF+ and BF2(OH)2- may comprise 1-10% when the concentrations of the appropriate components are high. According to the simulation results by PHREEQC and calculated results, the ratio of main fluoride species to total fluoride varies as a function of pH and the concentrations and ratios of F and Al. ?? 2011.

  5. Manufacture of high purity low arsenic anhydrous hydrogen fluoride

    SciTech Connect

    Jenczewski, T.J.; Sturtevant, R.L.; Morgan, T.R.; Boghean, B.J.; Butt, D.C.

    1988-07-12

    A process for manufacturing anhydrous hydrogen fluoride with reduced levels of arsenic impurity from arsenic contaminated anhydrous hydrogen fluoride is described which comprises: (a) contacting the anhydrous hydrogen fluoride with an effective amount of hydrogen peroxide to oxidize the arsenic impurity in the presence of a catalyst which comprises a catalytic amount of (i) molybdenum or an inorganic molybdenum compound and (ii) a phosphate compound, at a temperature and for a period of time sufficient to oxidize volatile trivalent arsenic impurities in the anhydrous hydrogen fluoride to non-volatile pentavalent arsenic compounds, and (b) distilling the resulting mixture and recovering anhydrous hydrogen fluoride with reduced levels of arsenic impurity.

  6. Fluoride: a risk factor for inflammatory bowel disease?

    PubMed

    Follin-Arbelet, Benoit; Moum, Bjørn

    2016-09-01

    Although the association between inflammatory bowel disease (IBD) and oral hygiene has been noticed before, there has been little research on prolonged fluoride exposure as a possible risk factor. In the presented cases, exposure to fluoride seems indirectly associated with higher incidence of IBD. Fluoride toxicology and epidemiology documents frequent unspecific chronic gastrointestinal symptoms and intestinal inflammation. Efflux genes that confer resistance to environmental fluoride may select for IBD associated gut microbiota and therefore be involved in the pathogenesis. Together these multidisciplinary results argue for further investigation on the hypothesis of fluoride as a risk factor for IBD. PMID:27199224

  7. PROCESS FOR THE PRODUCTION OF AMMONIUM URANIUM FLUORIDE

    DOEpatents

    Ellis, A.S.; Mooney, R.B.

    1953-08-25

    This patent relates to the preparation of ammonium uranium fluoride. The process comprises adding a water soluble fluoride to an aqueous solution of a uranous compound containing an ammonium salt, and isolating the resulting precipitate. This patent relates to the manufacture of uranium tetnafluoride from ammonium uranium fluoride, NH/sub 4/UF/sub 5/. Uranium tetrafluoride is prepared by heating the ammonium uranium fluoride to a temperature at which dissociation occurs with liberation of ammonium fluoride. Preferably the process is carried out under reduced pressure, or in a current of an inert gas.

  8. Titania-lanthanum phosphate photoactive and hydrophobic new generation catalyst

    NASA Astrophysics Data System (ADS)

    Jyothi, Chembolli K.; Jaimy, Kanakkanmavudi B.; Ghosh, Swapankumar; Sankar, Sasidharan; Smitha, V. S.; Warrier, K. G. K.

    2011-07-01

    Titania-lanthanum phosphate nanocomposites with multifunctional properties have been synthesized by aqueous sol-gel method. The precursor sols with varying TiO 2:LaPO 4 ratios were applied as thin coating on glass substrates in order to be transparent, hydrophobic, photocatalytically active coatings. The phase compositions of the composite powders were identified by powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM). The anatase phase of TiO 2 in TiO 2-LaPO 4 composite precursors was found to be stable even on annealing at 800 °C. The glass substrates, coated with TL1 (TiO 2-LaPO 4 composition with 1 mol% LaPO 4) and TL50 (composite precursor containing TiO 2 and LaPO 4 with molar ratio 1:1) sols and annealed at 400 °C, produced contact angles of 74° and 92°, respectively, though it is only 62° for pure TiO 2 coating. The glass substrates, coated with TL50 sol, produced surfaces with relatively high roughness and uneven morphology. The TL1 material, annealed at 800 °C, has shown the highest UV photoactivity with an apparent rate constant, kapp=24×10 -3 min -1, which is over five times higher than that observed with standard Hombikat UV 100 ( kapp=4×10 -3 min -1). The photoactivity combined with a moderate contact angle (85.3°) shows that this material has a promise as an efficient self-cleaning precursor.

  9. Europium doped lanthanum zirconate nanoparticles with high concentration quenching

    SciTech Connect

    Alaparthi, Suresh B.; Lu, Long; Tian, Yue; Mao, Yuanbing

    2014-01-01

    Graphical abstract: - Highlights: • Eu:La{sub 2}Zr{sub 2}O{sub 7} nanoparticles were prepared facilely by a kinetically modified molten salt method. • High color purity and concentration quenching were achieved in these La{sub 2}Zr{sub 2}O{sub 7}:Eu nanoparticles. • Concentration quenching mechanism was discussed for Eu{sup 3+} in these Eu:La{sub 2}Zr{sub 2}O{sub 7} nanoparticles. - Abstract: A series of Eu{sup 3+} doped lanthanum zirconate (La{sub 2}Zr{sub 2}O{sub 7}) nanoparticles (NPs, 20 ± 5 nm in diameter) with cubic fluorite structure were facilely synthesized by a kinetically modified molten salt synthetic (MSS) process and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and photoluminescence spectra (PL). Under the excitation of 405 nm, intense red emission with high color purity can be observed in the Eu{sup 3+} doped La{sub 2}Zr{sub 2}O{sub 7} NPs. Moreover, the as-prepared Eu:La{sub 2}Zr{sub 2}O{sub 7} NPs possess high concentration quenching, which is as high as ∼32.5 mol% of europium dopants in the La{sub 2}Zr{sub 2}O{sub 7} host. The corresponding concentration quenching mechanism was discussed as well. Our results confirm that the kinetically modified MSS process is a promising approach for preparing rare earth (RE) ions doped A{sub 2}B{sub 2}O{sub 7} nanoparticles with uniform RE doping and high concentration quenching.

  10. A new large area lanthanum hexaboride plasma source

    SciTech Connect

    Cooper, C. M.; Gekelman, W.; Pribyl, P.; Lucky, Z.

    2010-08-15

    A new 18x18 cm{sup 2} active area lanthanum hexaboride (LaB{sub 6}) plasma source for use in a dc discharge has been developed at UCLA. The cathode consists of four tiled LaB{sub 6} pieces indirectly heated to electron emission (1750 deg. C) by a graphite heater. A molybdenum mesh anode 33 cm in front of the LaB{sub 6} accelerates the electrons, ionizing a fill gas to create a 20x20 cm{sup 2} nearly square plasma. The source is run in pulsed operation with the anode biased up to +400 V dc with respect to the cathode for up to 100 ms at a 1 Hz repetition rate. Both the cathode and anode ''float'' electrically with respect to the chamber walls. The source is placed in a toroidal chamber 2 m wide and 3 m tall with a major radius of 5 m. Toroidal and vertical magnetic fields confine the current-free plasma which follows the field in a helix. The plasma starts on the bottom of the machine and spirals around it up to four times (120 m) and can be configured to terminate either on the top wall or on the neutral gas itself. The source typically operates with a discharge current up to 250 A in helium making plasmas with T{sub e}<30 eV, T{sub i}<16 eV, and n{sub e}<3x10{sup 13} cm{sup -3} in a background field of 100 G

  11. Back bombardment for dispenser and lanthanum hexaboride cathodes

    NASA Astrophysics Data System (ADS)

    Bakr, Mahmoud; Kinjo, R.; Choi, Y. W.; Omer, M.; Yoshida, K.; Ueda, S.; Takasaki, M.; Ishida, K.; Kimura, N.; Sonobe, T.; Kii, T.; Masuda, K.; Ohgaki, H.; Zen, H.

    2011-06-01

    The back bombardment (BB) effect limits wide usage of thermionic rf guns. The BB effect induces not only ramping-up of a cathode’s temperature and beam current, but also degradation of cavity voltage and beam energy during a macropulse. This paper presents a comparison of the BB effect for the case of dispenser tungsten-base (DC) and lanthanum hexaboride (LaB6) thermionic rf gun cathodes. For each, particle simulation codes are used to simulate the BB effect and electron beam dynamics in a thermionic rf gun cathode. A semiempirical equation is also used to investigate the stopping range and deposited heat power of BB electrons in the cathode material. A numerical simulation method is used to calculate the change of the cathode temperature and current density during a single macropulse. This is done by solving two differential equations for the rf gun cavity equivalent circuit and one-dimensional thermal diffusion equation. High electron emission and small beam size are required for generation of a high-brightness electron beam, and so in this work the emission properties of the cathode are taken into account. Simulations of the BB effect show that, for a pulse of 6μs duration, the DC cathode experiences a large change in the temperature compared with LaB6, and a change in current density 6 times higher. Validation of the simulation results is performed using experimental data for beam current beyond the gun exit. The experimental data is well reproduced using the simulation method.

  12. Appropriate uses of fluorides for children: guidelines from the Canadian Workshop on the Evaluation of Current Recommendations Concerning Fluorides.

    PubMed Central

    Clark, D C

    1993-01-01

    OBJECTIVE: To prevent fluorosis caused by excessive fluoride ingestion by revising recommendations for fluoride intake by children. OPTIONS: Limiting fluoride ingestion from fluoridated water, fluoride supplements and fluoride dentifrices. OUTCOMES: Reduction in the prevalence of dental fluorosis and continued prevention of dental caries. EVIDENCE: Before the workshop, experts prepared comprehensive literature reviews of fluoride therapies, fluoride ingestion and the prevalence and causes of dental fluorosis. The papers, which were peer-reviewed, revised and circulated to the workshop participants, formed the basis of the workshop discussions. VALUES: Recommendations to limit fluoride intake were vigorously debated before being adopted as the consensus opinion of the workshop group. BENEFITS, HARMS AND COSTS: Decrease in the prevalence of dental fluorosis with continuing preventive effects of fluoride use. The only significant cost would be in preparing new, low-concentration fluoride products for distribution. RECOMMENDATIONS: Fluoride supplementation should be limited to children 3 years of age and older in areas where there is less than 0.3 ppm of fluoride in the water supply. Children in all areas should use only a "pea-sized" amount of fluoride dentifrice no more than twice daily under the supervision of an adult. VALIDATION: These recommendations are almost identical to changes to recommendations for the use of fluoride supplements recently proposed by a group of European countries. SPONSORS: The workshop was organized by Dr. D. Christopher Clark, of the University of British Columbia, and Drs. Hardy Limeback and Ralph C. Burgess, of the University of Toronto, and funded by Proctor and Gamble Inc., Toronto, the Medical Research Council of Canada and Health Canada (formerly the Department of National Health and Welfare). The recommendations were formally adopted by the Canadian Dental Association in April 1993. PMID:8261348

  13. Surface crystallization of a fluoride glass

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.; Doremus, Robert H.

    1983-01-01

    Growth of crystals on the surface of a Zr-Ba-La fluoride glass was observed by optical and scanning electron microscopy. Small, dark crystal nucleated rapidly and grew to a size of about 10 microns; then they stopped growing, and wrinkled regions emerged, covering the entire crystal surface.

  14. Beryllium fluoride film protects beryllium against corrosion

    NASA Technical Reports Server (NTRS)

    O donnell, P. M.; Odonnell, P. M.

    1967-01-01

    Film of beryllium fluoride protects beryllium against corrosion and stress corrosion cracking in water containing chloride ion concentrations. The film is formed by exposing the beryllium to fluorine gas at 535 degrees C or higher and makes beryllium suitable for space applications.

  15. THE DEVELOPMENT OF AN INDIGENOUS FLUORIDE FILTER

    EPA Science Inventory

    Given that an essential component of the design is that it can be adapted for use throughout the world, the potential media investigated are those available in the regions containing fluoride contaminated groundwater. From the literature, wood charcoal, bone char, laterite and...

  16. Xenon fluorides show potential as fluorinating agents

    NASA Technical Reports Server (NTRS)

    Chernick, C. L.; Shieh, T. C.; Yang, N. C.

    1967-01-01

    Xenon fluorides permit the controlled addition of fluorine across an olefinic double bond. They provide a series of fluorinating agents that permit ready separation from the product at a high purity. The reactions may be carried out in the vapor phase.

  17. Polyvinylidene fluoride film as a capacitor dielectric

    NASA Technical Reports Server (NTRS)

    Dematos, H. V.

    1981-01-01

    Thin strips of polyvinylidene fluoride film (PVDF) with vacuum deposited electrodes were made into capacitors by conventional winding and fabrication techniques. These devices were used to identify and evaluate the performance characteristics offered by the PVDF in metallized film capacitors. Variations in capacitor parameters with temperature and frequence were evaluated and compared with other dielectric films. Their impact on capacitor applications is discussed.

  18. Actinide measurements by AMS using fluoride matrices

    NASA Astrophysics Data System (ADS)

    Cornett, R. J.; Kazi, Z. H.; Zhao, X.-L.; Chartrand, M. G.; Charles, R. J.; Kieser, W. E.

    2015-10-01

    Actinides can be measured by alpha spectroscopy (AS), mass spectroscopy or accelerator mass spectrometry (AMS). We tested a simple method to separate Pu and Am isotopes from the sample matrix using a single extraction chromatography column. The actinides in the column eluent were then measured by AS or AMS using a fluoride target matrix. Pu and Am were coprecipitated with NdF3. The strongest AMS beams of Pu and Am were produced when there was a large excess of fluoride donor atoms in the target and the NdF3 precipitates were diluted about 6-8 fold with PbF2. The measured concentrations of 239,240Pu and 241Am agreed with the concentrations in standards of known activity and with two IAEA certified reference materials. Measurements of 239,240Pu and 241Am made at A.E. Lalonde AMS Laboratory agree, within their statistical uncertainty, with independent measurements made using the IsoTrace AMS system. This work demonstrated that fluoride targets can produce reliable beams of actinide anions and that the measurement of actinides using fluorides agree with published values in certified reference materials.

  19. Aqueous vinylidene fluoride polymer coating composition

    NASA Technical Reports Server (NTRS)

    Bartoszek, Edward J. (Inventor); Christofas, Alkis (Inventor)

    1978-01-01

    A water-based coating composition which may be air dried to form durable, fire resistant coatings includes dispersed vinylidene fluoride polymer particles, emulsified liquid epoxy resin and a dissolved emulsifying agent for said epoxy resin which agent is also capable of rapidly curing the epoxy resin upon removal of the water from the composition.

  20. Monitoring of fluoride in groundwater resources of Iran.

    PubMed

    Mesdaghinia, Alireza; Vaghefi, Kooshiar Azam; Montazeri, Ahmad; Mohebbi, Mohammad Reza; Saeedi, Reza

    2010-04-01

    Fluoride concentration in groundwater resources that used as the source of drinking water in urban areas of Iran was determined. All of the groundwater wells located in urban areas were monitored in 2008. Fluoride concentration of water samples was measured using SPADNS method. The nationwide mean fluoride concentration in the groundwater resources was found to be 0.47 +/- 0.28 (+/- standard deviation) mg/L. Only in Bushehr Province, the provincial mean fluoride level in the groundwater resources was higher than the WHO guideline value of 1.5 mg/L (1.86 +/- 0.86 mg/L). At nationwide level, the portion of extracted groundwater with fluoride concentration lower than the minimum permissible level of 0.5 mg/L, desirable fluoride range of 0.5-1.5 mg/L and elevated fluoride level was 69.2, 29.3 and 1.4%, respectively. In the areas with low fluoride content drinking water, it is recommended that fluoride is absorbed by use of high fluoride content foods and beverages. The recommendations for the circumstances with excessive fluoride content of drinking water are provision of drinking water from alternative sources and defluoridation of drinking water by point-of-use systems, respectively. PMID:20306173

  1. Fluoride Content of Bottled Drinking Water in Chennai, Tamilnadu

    PubMed Central

    Ravi, Karunya; Rajapandian, K.; Gurunathan, Deepa

    2015-01-01

    Context The optimum level of fluoride in drinking water is 0.7 to 1.2 ppm. Decreased fluoride concentration leads to increased risk of caries and increased concentration can lead to dental or skeletal fluorosis. One crore liters of water is supplied to Chennai and surrounding areas through pouches and bottles which carters about one third of city population. Aim The aim of this study is to determine the fluoride concentration in top 10 bottled waters in Chennai and to check the accuracy of their labelling. Materials and Methods Top selling bottled waters, 6 multinational and 4 Non- multinational brands were selected for the study. Three different batches of each brand were purchased. The labels of the bottled were removed after collecting the details regarding fluoride content. All the bottles were numbered and sent for fluoride content analysis using SPADNS calorimetric method. Results All the brands and batches which were analysed for the study had less than optimal fluoride content and there is a significant variation in fluoride concentration of each brand and among different batches of same brand bottled waters. The range of fluoride level in tested samples was between 0.27 to 0.59. Only one brand’s label had information regarding the fluoride content. Conclusion Standardization of fluoride levels in bottled waters and labelling of fluoride content should become mandatory. PMID:26557612

  2. Solid electrolytes for fluoride ion batteries: ionic conductivity in polycrystalline tysonite-type fluorides.

    PubMed

    Rongeat, Carine; Reddy, M Anji; Witter, Raiker; Fichtner, Maximilian

    2014-02-12

    Batteries based on a fluoride shuttle (fluoride ion battery, FIB) can theoretically provide high energy densities and can thus be considered as an interesting alternative to Li-ion batteries. Large improvements are still needed regarding their actual performance, in particular for the ionic conductivity of the solid electrolyte. At the current state of the art, two types of fluoride families can be considered for electrolyte applications: alkaline-earth fluorides having a fluorite-type structure and rare-earth fluorides having a tysonite-type structure. As regard to the latter, high ionic conductivities have been reported for doped LaF3 single crystals. However, polycrystalline materials would be easier to implement in a FIB due to practical reasons in the cell manufacturing. Hence, we have analyzed in detail the ionic conductivity of La(1-y)Ba(y)F(3-y) (0 ≤ y ≤ 0.15) solid solutions prepared by ball milling. The combination of DC and AC conductivity analyses provides a better understanding of the conduction mechanism in tysonite-type fluorides with a blocking effect of the grain boundaries. Heat treatment of the electrolyte material was performed and leads to an improvement of the ionic conductivity. This confirms the detrimental effect of grain boundaries and opens new route for the development of solid electrolytes for FIB with high ionic conductivities. PMID:24444763

  3. Geological sources of fluoride and acceptable intake of fluoride in an endemic fluorosis area, southern Iran.

    PubMed

    Battaleb-Looie, Sedigheh; Moore, Farid; Jacks, Gunnar; Ketabdari, Mohammad Reza

    2012-10-01

    The present study is the first attempt to put forward possible source(s) of fluoride in the Dashtestan area, Bushehr Province, southern Iran. In response to reports on the high incidence of dental fluorosis, 35 surface and groundwater samples were collected and analysed for fluoride. The results indicate that dissolved fluoride in the study area is above the maximum permissible limit recommended by the World Health Organization (WHO). An additional 35 soil and rock samples were also collected and analysed for fluoride, and rock samples were subjected to petrographic investigations and X-ray diffraction. The results of these analyses show that the most likely source for fluoride in the groundwater is from clay minerals (chlorite) and micas (muscovite, sericite, and biotite) in the soils and rocks in the area. We also note that due to the high average temperatures all year round and excessive water consumption in the area, the optimum fluoride dose level should be lower than that recommended by the WHO. PMID:22426705

  4. Zirconium fluoride glass - Surface crystals formed by reaction with water

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.; Bansal, N. P.; Bradner, T.; Murphy, D.

    1984-01-01

    The hydrated surfaces of a zirconium barium fluoride glass, which has potential for application in optical fibers and other optical elements, were observed by scanning electron microscopy. Crystalline zirconium fluoride was identified by analysis of X-ray diffraction patterns of the surface crystals and found to be the main constituent of the surface material. It was also found that hydrated zirconium fluorides form only in highly acidic fluoride solutions. It is possible that the zirconium fluoride crystals form directly on the glass surface as a result of its depletion of other ions. The solubility of zirconium fluoride is suggested to be probably much lower than that of barium fluoride (0.16 g/100 cu cm at 18 C). Dissolution was determined to be the predominant process in the initial stages of the reaction of the glass with water. Penetration of water into the glass has little effect.

  5. New Insight on the Response of Bacteria to Fluoride

    PubMed Central

    Breaker, R.R.

    2012-01-01

    Fluoride has been used for decades to prevent caries and it is well established that this anion can inhibit the growth of bacteria. However, the precise effects that fluoride has on bacteria and the mechanisms that bacteria use to overcome fluoride toxicity have largely remained unexplored. Recently, my laboratory reported the discovery of biological systems that bacteria use to sense fluoride and reduce fluoride toxicity. These sensors and their associated genes are very widespread in biology, which has implications for a number of issues that are central to the use of fluoride for dental care. Below I provide a summary of our findings, comment on some of the key prospects for expanding our understanding of fluoride's effects on biology, and propose some future uses of this knowledge. PMID:22327376

  6. FLUORIDE CONTENT OF COMMERCIALLY AVAILABLE SOY MILK PRODUCTS IN THAILAND.

    PubMed

    Rirattanapong, Opas; Rirattanapong, Praphasri

    2016-01-01

    Abstract. In Thailand, the consumption of soy milk products is common but there is limited data about their fluoride content. The purpose of this study was to es- timate the fluoride content of soy milk products available in Thailand. Fluoride content was determined for 76 brands of soy milk using a F-ion-specific electrode. The fluoride concentrations ranged from 0.01 to 3.78 μg/ml. The fluoride content was not related to sugar content, soy bean content or the sterilization process. Among 3 brands of soy milk containing tea powder extract, the fluoride content was high (1.25 to 3.78 μg/ml). Most brands of soy milk tested in our study had fluoride content below the optimal daily intake but brands containing tea powder extract if consumed by children may increase their risk for fluorosis. PMID:27086437

  7. IMPACT OF FLUORIDE ON DENTAL HEALTH QUALITY

    PubMed Central

    Medjedovic, Eida; Medjedovic, Senad; Deljo, Dervis; Sukalo, Aziz

    2015-01-01

    Introduction: Fluoride is natural element that strengthens teeth and prevents their decay. Experts believe that the best way to prevent cavities is the use of fluoride from multiple sources. Studies even show that in some cases, fluoride can stop already started damage of the teeth. In children younger than 6 years fluoride is incorporated into the enamel of permanent teeth, making the teeth more resistant to the action of bacterial and acids in food. Goal: The aim of this study is to determine the effects of improving the health status of teeth after six months treatment with the use of topical fluoridation 0.5% NaF, and the level and quality of the impact of treatment with chemical 0.5% NaF on the dental health of children at age from 8 to 15 years, in relation to gender and chronological age. This study included school children aged 8 to 15 years who visited health and dental services dependent in Mostar. Results: It is obvious that after the implementation of treatment with 5% NaF by the method of topical fluoridation, health status of subjects from the experimental group significantly improved, so that at the final review 89.71% or 61 subjects of the experimental group had healthy (cured teeth), tooth with dental caries only 5.88% or 4 respondents tooth with dental caries and filling 4.41% or 3 respondents, extracted baby tooth 14.71% or 10 respondents, while for 13.24% of respondents was identified state with still unerupted teeth. Our findings are indirectly confirmed that the six-month treatment of fluoridation with 5% NaF, contributed to statistically significant improvement in overall oral health of the experimental group compared to the control group which was not treated by any dental treatment. Conclusion: It can be concluded that there is a statistically significant difference in the evaluated parameters of oral health of children in the control group compared to the studied parameters of oral health the experimental group of children at the final

  8. Fluoride in the environment and its metabolism in humans.

    PubMed

    Jha, Sunil Kumar; Mishra, Vinay Kumar; Sharma, Dinesh Kumar; Damodaran, Thukkaram

    2011-01-01

    The presence of environmental fluoride and its impact on human health is well documented. When consumed in adequate quantity, fluoride prevents dental caries, assists in the formation of dental enamels, and prevents deficiencies in bone mineralization. At excessive exposure levels, ingestion of fluoride causes dental fluorosis skeletal fluorosis, and manifestations such as gastrointestinal, neurological, and urinary problems. The distribution of fluoride in the environment is uneven and largely is believed to derive from geogenic causes. The natural sources of fluoride are fluorite, fluorapatite, and cryolite, whereas anthropogenic sources include coal burning, oil refining, steel production, brick-making industries, and phosphatic fertilizer plants, among others. Among the various sources of fluoride in the environment, those of anthropogenic origin have occasionally been considered to be major ones. The gourndwater is more susceptible to fluoride accumulation and contamination than are other environmental media, primarily because of its contact with geological substrates underneath. The high fluoride concentration in water usually reflects the solubility of fluoride (CaF₂). High concentrations are also often associated with soft, alkaline, and calcium-deficient waters. The fluoride compounds that occur naturally in drinking water are almost totally bioavailable (90%) and are completely absorbed from the gastrointestinal tract. As a result, drinking water is considered to be the potential source of fluoride that causes fluorosis. Because the bioavailability of fluoride is generally reduced in humans when consumed with milk or a calcium-rich diet, it is highly recommended that the inhabitants of fluoride-contaminated areas should incorporate calcium-rich foods in their routine diet. Guidelines for limiting the fluoride intake from drinking water have been postulated by various authorities. Such limits are designed to protect public health and should reflect all

  9. Water fluoridation: a critical review of the physiological effects of ingested fluoride as a public health intervention.

    PubMed

    Peckham, Stephen; Awofeso, Niyi

    2014-01-01

    Fluorine is the world's 13th most abundant element and constitutes 0.08% of the Earth crust. It has the highest electronegativity of all elements. Fluoride is widely distributed in the environment, occurring in the air, soils, rocks, and water. Although fluoride is used industrially in a fluorine compound, the manufacture of ceramics, pesticides, aerosol propellants, refrigerants, glassware, and Teflon cookware, it is a generally unwanted byproduct of aluminium, fertilizer, and iron ore manufacture. The medicinal use of fluorides for the prevention of dental caries began in January 1945 when community water supplies in Grand Rapids, United States, were fluoridated to a level of 1 ppm as a dental caries prevention measure. However, water fluoridation remains a controversial public health measure. This paper reviews the human health effects of fluoride. The authors conclude that available evidence suggests that fluoride has a potential to cause major adverse human health problems, while having only a modest dental caries prevention effect. As part of efforts to reduce hazardous fluoride ingestion, the practice of artificial water fluoridation should be reconsidered globally, while industrial safety measures need to be tightened in order to reduce unethical discharge of fluoride compounds into the environment. Public health approaches for global dental caries reduction that do not involve systemic ingestion of fluoride are urgently needed. PMID:24719570

  10. Water Fluoridation: A Critical Review of the Physiological Effects of Ingested Fluoride as a Public Health Intervention

    PubMed Central

    2014-01-01

    Fluorine is the world's 13th most abundant element and constitutes 0.08% of the Earth crust. It has the highest electronegativity of all elements. Fluoride is widely distributed in the environment, occurring in the air, soils, rocks, and water. Although fluoride is used industrially in a fluorine compound, the manufacture of ceramics, pesticides, aerosol propellants, refrigerants, glassware, and Teflon cookware, it is a generally unwanted byproduct of aluminium, fertilizer, and iron ore manufacture. The medicinal use of fluorides for the prevention of dental caries began in January 1945 when community water supplies in Grand Rapids, United States, were fluoridated to a level of 1 ppm as a dental caries prevention measure. However, water fluoridation remains a controversial public health measure. This paper reviews the human health effects of fluoride. The authors conclude that available evidence suggests that fluoride has a potential to cause major adverse human health problems, while having only a modest dental caries prevention effect. As part of efforts to reduce hazardous fluoride ingestion, the practice of artificial water fluoridation should be reconsidered globally, while industrial safety measures need to be tightened in order to reduce unethical discharge of fluoride compounds into the environment. Public health approaches for global dental caries reduction that do not involve systemic ingestion of fluoride are urgently needed. PMID:24719570

  11. Spacecraft charging control by thermal, field emission with lanthanum-hexaboride emitters

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1978-01-01

    Thermal, field emitters of lanthanum (or perhaps cerium) hexaboride (LaB6) with temperature variability up to about 1500K are suggested for spacecraft charging control. Such emitters operate at much lower voltages with considerably more control and add plasma-diagnostic versatility. These gains should outweigh the additional complexity of providing heat for the LaB6 thermal, field emitter.

  12. Comparative evaluation of the in vitro efficacy of lanthanum carbonate chewable tablets.

    PubMed

    Yang, Yongsheng; Bykadi, Srikant; Carlin, Alan S; Shah, Rakhi B; Yu, Lawrence X; Khan, Mansoor A

    2013-04-01

    The aims of this study were to systematically evaluate the effects of pH levels, phosphate concentrations, and tablet integrity on the phosphate binding profiles of lanthanum carbonate chewable tablets, and to compare the in vitro phosphate binding efficacy of one reference and two test products of lanthanum carbonate chewable tablets. Langmuir equation was utilized to calculate the binding constants k1 and k2 . The phosphate binding to the tablets of lanthanum carbonate product was pH dependent, with a faster binding rate at low pH. The crushed tablets bind phosphate more rapid. Compared with the whole tablets, the kinetic binding profiles from the crushed tablets were less variable under all conditions for both test and reference products. The phosphate level has a significant impact on the phosphate binding for both whole and crushed tablets under all pH conditions, with more binding at higher phosphate concentration. The phosphate binding profiles displayed significant difference among the products. For a crushed tablet, the phosphate binding to lanthanum reached equilibrium within 8 h under all conditions. The 90% confidence interval for the k2 ratio (test/reference) was well within the 80%-125% under all pH conditions. However, the k1 ratio varies from 54% to 144%. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 102:1370-1381, 2013. PMID:23334989

  13. First-principles study of the solid solution of hydrogen in lanthanum

    SciTech Connect

    Schoellhammer, Gunther; Herzig, Peter; Wolf, Walter; Vajda, Peter; Yvon, Klaus

    2011-09-01

    Results from first-principles investigations of the energetical, structural, electronic, and vibrational properties of model structures probing the metal-rich region of the lanthanum-hydrogen system, i.e., the region of the solid solution of hydrogen in lanthanum, are presented. We have studied the site preference and the ordering tendency of hydrogen atoms interstitially bonded in close-packed lanthanum. Spatially separated hydrogen atoms have turned out to exhibit an energetical preference for the occupation of octahedral interstitial sites at low temperature. Indications for a reversal of the site preference in favor of the occupation of tetrahedral interstitial sites at elevated temperature have been found. Linear arrangements consisting of pairs of octahedrally and/or tetrahedrally coordinated hydrogen atoms collinearly bonded to a central lanthanum atom have turned out to be energetically favorable structure elements. Further stabilization is achieved if such hydrogen pairs are in turn linked together so that extended chains of La-H bonds are formed. Pair formation and chain linking counteract the energetical preference for octahedral coordination observed for separated hydrogen atoms.

  14. Effects of flossing and rinsing with a fluoridated mouthwash after brushing with a fluoridated toothpaste on salivary fluoride clearance.

    PubMed

    Duckworth, R M; Horay, C; Huntington, E; Mehta, V

    2009-01-01

    The aims of this study were to test the hypothesis that flossing after brushing with a fluoridated toothpaste may lower salivary fluoride (F), and to evaluate the consequence of subsequent F mouthwash use. Twenty adults used 3 oral hygiene regimes in a randomised order: A, brushing with an NaF toothpaste; B, as A but followed by professional flossing; C, as B followed by rinsing with an NaF mouthwash. Saliva samples were collected up to 120 min after each regime and analysed for F. The mean area under the clearance curve value for regime C was statistically significantly greater than the corresponding values for A and B (p < 0.0001), which differed little. The regime that included the mouthwash may provide better anticaries protection. PMID:19776569

  15. Fluoride content of clay minerals and argillaceous earth materials

    USGS Publications Warehouse

    Thomas, J., Jr.; Glass, H.D.; White, W.A.; Trandel, R.M.

    1977-01-01

    A reliable method, utilizing a fluoride ion-selective electrode, is described for the determination of fluoride in clays and shales. Interference by aluminum and iron is minimal. The reproducibility of the method is about ??5% at different levels of fluoride concentration. Data are presented for various clay minerals and for the <2-??m fractions of marine and nonmarine clays and shales. Fluoride values range from 44 ppm (0.0044%) for nontronite from Colfax, WA, to 51,800 ppm (5.18%) for hectorite from Hector, CA. In general, clays formed under hydrothermal conditions are relatively high in fluoride content, provided the hydrothermal waters are high in fluoride content. Besides hectorite, dickite from Ouray, CO, was found to contain more than 50 times as much fluoride (6700 ppm) as highly crystalline geode kaolinite (125 ppm). The clay stratum immediately overlying a fluorite mineralized zone in southern Illinois was found to have a higher fluoride content than the same stratum in a nonmineralized zone approximately 1 mile away. Nonmarine shales in contact with Australian coals were found to be lower in fluoride content than were marine shales in contact with Illinois coals. It is believed that, in certain instances, peak shifts on DTA curves of similar clay minerals are the result of significant differences in their fluoride content. ?? 1977.

  16. Community water fluoridation and caries prevention: a critical review.

    PubMed

    Pizzo, Giuseppe; Piscopo, Maria R; Pizzo, Ignazio; Giuliana, Giovanna

    2007-09-01

    The aim of this paper was to critically review the current role of community water fluoridation in preventing dental caries. Original articles and reviews published in English language from January 2001 to June 2006 were selected through MEDLINE database. Other sources were taken from the references of the selected papers. For the past 50 years community water fluoridation has been considered the milestone of caries prevention and as one of the major public health measures of the 20th century. However, it is now accepted that the primary cariostatic action of fluoride occurs after tooth eruption. Moreover, the caries reduction directly attributable to water fluoridation have declined in the last decades as the use of topical fluoride had become more widespread, whereas enamel fluorosis has been reported as an emerging problem in fluoridated areas. Several studies conducted in fluoridated and nonfluoridated communities suggested that this method of delivering fluoride may be unnecessary for caries prevention, particularly in the industrialized countries where the caries level has became low. Although water fluoridation may still be a relevant public health measure in poor and disadvantaged populations, the use of topical fluoride offers an optimal opportunity to prevent caries among people living in both industrialized and developing countries. PMID:17333303

  17. A comparative study of fluoride release from two different sealants

    PubMed Central

    Ananda, Shimoga-Raju

    2014-01-01

    Objectives: The introduction of fluoride releasing sealants and glass ionomer cements as fissure sealants adds another dimension to prevention of pit and fissure caries. The ability of resin sealants and glass ionomer cements to release fluoride on a long term basis to the sealed enamel and the adjacent unsealed pit and fissure and cuspal incline enamel may allow for further reduction in pit and fissure caries experience for children. Hence, the study was conducted to compare the amount of fluoride release in the plaque after placing fluoride releasing pit and fissure sealants and glass ionomer fissure sealants used in Atraumatic Restorative Treatment (ART) approach. To compare the fluoride release of both the materials at the different time intervals. Material and Methods: A total of 60 school going children were included in this study. Before application of the sealants, baseline plaque fluoride levels were estimated from all the study subjects. After application of sealants again the same was estimated at an interval of 24 hour, 9 days, 2 weeks and 4 weeks. Results: The peak plaque fluoride levels were achieved at 24 hours after application of fissure sealants in all the groups. Conclusions: Within the limitation of the study, the present study indicated that fluoride releasing fissure sealants may act as a source of fluoride in plaque which will help in preventing pit and fissure and smooth surface caries in the tooth sealed with fissure sealants. Key words:Plaque fluoride, pit and fissures sealants, dental caries. PMID:25674315

  18. Arsenic from community water fluoridation: quantifying the effect.

    PubMed

    Peterson, Emily; Shapiro, Howard; Li, Ye; Minnery, John G; Copes, Ray

    2016-04-01

    Community water fluoridation is a WHO recommended strategy to prevent dental carries. One debated concern is that hydrofluorosilicic acid, used to fluoridate water, contains arsenic and poses a health risk. This study was undertaken to determine if fluoridation contributes to arsenic in drinking water, to estimate the amount of additional arsenic associated with fluoridation, and compare this to the National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard and estimates from other researchers. Using surveillance data from Ontario drinking water systems, mixed effects linear regression was performed to examine the effect of fluoridation status on the difference in arsenic concentration between raw water and treated water samples. On average, drinking water treatment was found to reduce arsenic levels in water in both fluoridated and non-fluoridated systems by 0.2 μg/L. However, fluoridated systems were associated with an additional 0.078 μg/L (95% CI 0.021, 0.136) of arsenic in water when compared to non-fluoridated systems (P = 0.008) while controlling for raw water arsenic concentrations, types of treatment processes, and source water type. Our estimate is consistent with concentrations expected from other research and is less than 10% of the NSF/ANSI standard of 1 μg/L arsenic in water. This study provides further information to inform decision-making regarding community water fluoridation. PMID:27105409

  19. Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

    DOEpatents

    Windt, Norman F.; Williams, Joe L.

    1983-01-01

    The invention is a process for decontaminating particulate nickel contaminated with actinide-metal fluorides. In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel containing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

  20. Fluoride ion encapsulation by Mg[superscript 2+] ions and phosphates in a fluoride riboswitch

    SciTech Connect

    Ren, Aiming; Rajashankar, Kanagalaghatta R.; Patel, Dinshaw J.

    2012-06-26

    Significant advances in our understanding of RNA architecture, folding and recognition have emerged from structure-function studies on riboswitches, non-coding RNAs whose sensing domains bind small ligands and whose adjacent expression platforms contain RNA elements involved in the control of gene regulation. We now report on the ligand-bound structure of the Thermotoga petrophila fluoride riboswitch, which adopts a higher-order RNA architecture stabilized by pseudoknot and long-range reversed Watson-Crick and Hoogsteen A {sm_bullet} U pair formation. The bound fluoride ion is encapsulated within the junctional architecture, anchored in place through direct coordination to three Mg{sup 2+} ions, which in turn are octahedrally coordinated to water molecules and five inwardly pointing backbone phosphates. Our structure of the fluoride riboswitch in the bound state shows how RNA can form a binding pocket selective for fluoride, while discriminating against larger halide ions. The T. petrophila fluoride riboswitch probably functions in gene regulation through a transcription termination mechanism.

  1. Analysis of differentially expressed genes between fluoride-sensitive and fluoride-endurable individuals in midgut of silkworm, Bombyx mori.

    PubMed

    Qian, Heying; Li, Gang; He, Qingling; Zhang, Huaguang; Xu, Anying

    2016-08-15

    Fluoride tolerance is an economically important trait of silkworm. Near-isogenic lines (NILs) of the dominant endurance to fluoride (Def) gene in Bombyx mori has been constructed before. Here, we analyzed the gene expression profiles of midgut of fluoride-sensitive and fluoride-endurable individuals of Def NILs by using high-throughput Illumina sequencing technology and bioinformatics tools, and identified differentially expressed genes between these individuals. A total of 3,612,399 and 3,567,631 clean tags for the libraries of fluoride-endurable and fluoride-sensitive individuals were obtained, which corresponded to 32,933 and 43,976 distinct clean tags, respectively. Analysis of differentially expressed genes indicates that 241 genes are differentially expressed between the two libraries. Among the 241 genes, 30 are up-regulated and 211 are down-regulated in fluoride-endurable individuals. Pathway enrichment analysis demonstrates that genes related to ribosomes, pancreatic secretion, steroid biosynthesis, glutathione metabolism, steroid biosynthesis, and glycerolipid metabolism are down-regulated in fluoride-endurable individuals. qRT-PCR was conducted to confirm the results of the DGE. The present study analyzed differential expression of related genes and tried to find out whether the crucial genes were related to fluoride detoxification which might elucidate fluoride effect and provide a new way in the fluorosis research. PMID:27106117

  2. Comparison of salivary fluoride concentrations after administration of a bioadhesive slow-release tablet and a conventional fluoride tablet.

    PubMed

    Bottenberg, P; Cleymaet, R; de Muynck, C; Remon, J P; Coomans, D; Slop, D

    1992-08-01

    The in-vitro and in-vivo fluoride release of bioadhesive, slow-release tablets prepared from a mixture of polyethylene glycol polymers, containing 0.1 mg of fluoride as NaF was studied, and their ability to sustain fluoride levels in saliva were compared with conventional fluoride tablets with the same fluoride content. In-vitro release experiments showed that the bioadhesive tablets needed 8 h to release all their fluoride compared with less than 1 h for the conventional fluoride tablets. In-vivo, the bioadhesive tablets had a retention period of 6 h and could sustain a salivary fluoride level of more than 10 microM above the baseline for 7 h. The conventional fluoride tablets achieved a peak concentration of 0.5 mM directly after dissolution in the mouth, but the fluoride level could not be sustained for longer than 1 h. A good agreement was found between the in-vitro swelling behaviour of the bioadhesive tablets and their in-vitro and in-vivo release characteristics and their in-vivo retention time. PMID:1359097

  3. Fluoride release and uptake abilities of different fissure sealants

    PubMed Central

    Andenna, Gianluigi; Ceci, Matteo; Beltrami, Riccardo; Colombo, Marco; Cucca, Lucia

    2016-01-01

    Background The long-term capability of resin sealants and glass ionomer cements to release fluoride is associated to a reduction in pit and fissure caries. The regular use of fluoride varnishes/toothpastes can result in the absorption of fluoride into the sealant. The objective of the present study was to assess the fluoride release/uptake capacities of different fissure sealants. Material and Methods Three different fissure sealants (Fuji Triage/GC, Fissurit FX/Voco and Grandio Seal/Voco) were examined. Ten discs of each material were prepared. Each disc was incubated with distilled water and then the solution analyzed for diluted for fluoride concentration, using a combination of fluoride electrode (OrionGP 1 S/N 13824, Orion Research Inc, Boston, MA, USA) connected to an expandable ion analyzer (Orion 720A, Orion Research Inc, Boston, MA, USA). Standard curves between 1 and 100 ppm F- were used to calibrate the electrode. Cumulative fluoride release was measured on days 1, 2, 3, 5, 7, 21, 35 and 49, then two different fluoride varnishes/pastes (Profluorid Varnish/Voco, MI Paste Plus/GC), were applied to the sealants tested, and fluoride release (after reuptake) was measured on days 56, 70 and 84. Results Kruskal Wallis test confirmed significant differences in fluoride release between Fuji Triage/GC and Fissurit FX/Voco and Grandio Seal/Voco from day 1 (P < 0.001). The application of fluoride varnish Profluorid Varnish enhanced the fluoride release for all sealants (P < 0.05). MI Paste Plus enhanced the fluoride release for all sealants except for Fuji Triage/GC (P > 0.05). Conclusions The GIC-based sealant (Fuji Triage/GC) released significantly more fluoride than the resin sealants tested. The exposure to the fluoridated varnish (Profluorid Varnish) significantly recharged the sealants tested more than the CPP-ACPF toothpaste (MI Paste Plus). Key words:Fissure sealants, fluoride release, fluoride uptake, glass ionomer cements. PMID:27398179

  4. The Effect of Calcium Pre-Rinse on Salivary Fluoride After 900 ppm Fluoride Mouthwash: A Randomized Clinical Trial

    PubMed Central

    Ramazani, Nahid; Ahmadi, Rahil; Heidari, Zahra; Hushmandi, Arezoo

    2013-01-01

    Objective: Calcium fluoride deposit during fluoride application. Uptake and retention of fluoride by saliva depends generally on the concentration of calcium. In this study, the effect of calcium pre-rinse on salivary fluoride concentration after a 900 ppm fluoride mouthwash was investigated. Materials and Methods: This cross-over double-blind randomized clinical trial was conducted in a girls’ dormitory in Zahedan University of Medical Sciences, southeast Iran. In this study, 42 female dental students were chosen using simple randomization. During the first phase, 21 subjects (group A) used fluoride rinse (F regimen) and the remaining (group B) used calcium pre-rinse followed immediately by fluoride rinse (Ca + F regimen). In the second phase, participants rinsed using the mouthwashes not previously used. Prior to each phase prophylaxis was performed and no fluoridated product was used during a two-week interval between the phases. Salivary samples were taken immediately before (baseline), 1 and 12 hours after rinsing. The salivary fluoride concentration was determined using fluoride sensitive electrode. Repeated measures ANOVA was used for statistical analysis and the significance level was set at P<0.05. Results: There was significant difference between fluoride concentrations at different time points (P< 0.001). Significant differences were observed when the different time points of two regimens were examined. In contrast to this, the baseline before using F regimen and the baseline before using Ca + F regimen did not show any significance (P= 0.070). Conclusion: Pre-rinsing with calcium before fluoride is recommended because of significant increases in salivary fluoride concentration. PMID:24396357

  5. Production of sintered porous metal fluoride pellets

    DOEpatents

    Anderson, L.W.; Stephenson, M.J.

    1973-12-25

    Porous pellets characterized by a moderately reactive crust and a softer core of higher reactivity are produced by forming agglomerates containing a metal fluoride powder and a selected amount ofwater. The metal fluoride is selected to be sinterable and essentially non-reactive with gaseous fluorinating agents. The agglomerates are contacted with a gaseous fluorinating agent under controlled conditions whereby the heat generated by localized reaction of the agent and water is limited to values effccting bonding by localized sintering. Porous pellets composed of cryolite (Na/sub 3/AlF/sub 6/) can be used to selectively remove trace quantities of niobium pentafluoride from a feed gas consisting predominantly of uranium hexafluoride. (Official Gazette)

  6. Fluoride glass fibers: applications and prospects

    NASA Astrophysics Data System (ADS)

    Poulain, Marcel

    1998-09-01

    Fluoride glass fibers have been intensively developed for the last 20 years. A major effort was devoted to the fabrication of low loss fibers for repeaterless long haul telecommunications. This step which ended in the late eighties provided the basic technology for the manufacturing of multimode and single mode fibers with minimum losses below 10 dB/km. Such fibers area now used for various passive applications requiring the handling of IR signal. In this respect, fluoride fibers are complementary to silica fibers when wavelength exceeds 2 micrometers . Some practical set ups are operating for IR imaging, remote spectroscopy and thermometry. Special fibers such as polarization maintaining fibers have been developed for interferometric astronomy, which could also apply to sensors. UV transmission has still to be developed. Laser power delivery is another field of application for these fibers. YAG:Er laser at 2.9 micrometers attracts a growing interest for medical applications, ophthalmology and dentistry, while prospects for CO laser are positive. Active fibers are based on rare earth doped single mode fibers. They lead to the definition of numerous new laser lines and emphasized the potential of up conversion for the generation of visible light using IR pumping laser diodes. High power output has been achieved in the blue and the red light, which open prospects for compact and all solid state fiber lasers for a wide range of applications, from displays to medical uses. Optical amplification makes another field of R and D centered on telecommunication needs. Pr3+ doped fluoride fibers have been used for the 1.3 micrometers band, and Er based fluoride fiber amplifiers exhibit wider and flatter gain than those made from silica. Optical amplification may be implemented at other wavelengths for more general purposes.

  7. Effect of fluoride toothpastes on enamel demineralization

    PubMed Central

    Arnold, Wolfgang H; Dorow, Andreas; Langenhorst, Stephanie; Gintner, Zeno; Bánóczy, Jolan; Gaengler, Peter

    2006-01-01

    Background It was the aim of this study to investigate the effect of four different toothpastes with differing fluoride compounds on enamel remineralization. Methods A 3 × 3 mm window on the enamel surface of 90 human premolars was demineralized in a hydroxyethylcellulose solution at pH 4.8. The teeth were divided into 6 groups and the lower half of the window was covered with varnish serving as control. The teeth were immersed in a toothpaste slurry containing: placebo tooth paste (group 1); remineralization solution (group 2); Elmex Anticaries (group 3); Elmex Sensitive (group 4); Blend-a-med Complete (group 5) and Colgate GRF (group 6). Ten teeth of each group were used for the determination of the F- content in the superficial enamel layer and acid solubility of enamel expressed in soluble phosphorus. Of 6 teeth of each group serial sections were cut and investigated with polarization light microscopy (PLM) and quantitative energy dispersive X-ray analysis (EDX). Results The PLM results showed an increased remineralization of the lesion body in the Elmex Anticaries, Elmex Sensitive and Colgate GRF group but not in the Blend-a-med group. A statistically significant higher Ca content was found in the Elmex Anticaries group. The fluoride content in the superficial enamel layer was significantly increased in both Elmex groups and the Blend-a-med group. Phosphorus solubility was significantly decreased in both Elmex groups and the Blend-a-med group. Conclusion It can be concluded that amine fluoride compounds in toothpastes result in a clearly marked remineralization of caries like enamel lesions followed by sodium fluoride and sodium monofluorophosphate formulations. PMID:16776820

  8. Beam-hardening artifacts on computed tomography images caused by lanthanum carbonate hydrate in a patient on dialysis.

    PubMed

    Hayashi, Hiromitsu; Machida, Minoru; Sekine, Tetsuro; Yamaguchi, Hidenori; Kiriyama, Tomonari; Kumita, Shin-Ichiro

    2010-05-01

    Lanthanum carbonate hydrate is a nonaluminum, noncalcium phosphate binder containing lanthanum (La). It is effective in decreasing the serum phosphate level in patients on dialysis. Because the atomic number of the La contained in lanthanum carbonate hydrate is relatively high, at 57, this agent may cause strong artifacts on computed tomography (CT) images, which may be mistakenly interpreted as foreign bodies. We recently performed CT examination of a patient on Fosrenol chewable tablets (i.e., lanthanum carbonate hydrate). The CT images were difficult to evaluate because of strong beam hardening artifacts, and differentiation from foreign body aspiration was required. We report here our experience and a discussion of the characteristics of this artifact. PMID:20512553

  9. Site of Fluoride Accumulation in Navel Orange Leaves 1

    PubMed Central

    Chang, Chong W.; Thompson, C. Ray

    1966-01-01

    Fluoride-polluted navel orange leaves, Citrus sinensis (Linn.) Osbeck, were fractionated into the subcellular components in hexane/carbon tetrachloride mixtures having various densities. Fluoride was determined at each fraction. Analyses were also made for the subcellular distribution of chlorophyll, nitrogen, and DNA to assess the extent of cross-contamination of each component. The fraction containing cell wall, nuclei, and partly broken cells apparently contained a major amount of fluoride. However, if allowance was made for the cross-contamination of chloroplasts and chloroplast fragments, the fraction of chloroplasts was found to be the site of the highest fluoride accumulation. When each particulate component was washed with water after drying, the combined washings contained more than 50% of the total fluoride of the isolated fractions. The usual method of subcellular fractionation with aqueous solvent shifted the major site of fluoride accumulation from the fraction of chloroplasts to that of the supernatant. PMID:5908632

  10. Necessity to review the Brazilian regulation about fluoride toothpastes

    PubMed Central

    Cury, Jaime Aparecido; Caldarelli, Pablo Guilherme; Tenuta, Livia Maria Andaló

    2015-01-01

    The aim of this study was to evaluate the adequacy of the Brazilian legislation about fluoride toothpaste. A search was conducted in LILACS, Medline and SciELO databases about the fluoride concentration found in Brazilians toothpastes, using descriptors on health. Publications since 1981 have shown that some Brazilian toothpastes are not able to maintain, during their expiration time, a minimum of 1,000 ppm F of soluble fluoride in the formulation. However, the Brazilian regulation (ANVISA, Resolution 79, August 28, 2000) only sets the maximum total fluoride (0.15%; 1,500 ppm F) that a toothpaste may contain but not the minimum concentration of soluble fluoride that it should contain to have anticaries potential, which according to systematic reviews should be 1,000 ppm F. Therefore, the Brazilian regulation on fluoride toothpastes needs to be revised to assure the efficacy of those products for caries control. PMID:26487295

  11. Necessity to review the Brazilian regulation about fluoride toothpastes.

    PubMed

    Cury, Jaime Aparecido; Caldarelli, Pablo Guilherme; Tenuta, Livia Maria Andaló

    2015-01-01

    The aim of this study was to evaluate the adequacy of the Brazilian legislation about fluoride toothpaste. A search was conducted in LILACS, Medline and SciELO databases about the fluoride concentration found in Brazilians toothpastes, using descriptors on health. Publications since 1981 have shown that some Brazilian toothpastes are not able to maintain, during their expiration time, a minimum of 1,000 ppm F of soluble fluoride in the formulation. However, the Brazilian regulation (ANVISA, Resolution 79, August 28, 2000) only sets the maximum total fluoride (0.15%; 1,500 ppm F) that a toothpaste may contain but not the minimum concentration of soluble fluoride that it should contain to have anticaries potential, which according to systematic reviews should be 1,000 ppm F. Therefore, the Brazilian regulation on fluoride toothpastes needs to be revised to assure the efficacy of those products for caries control. PMID:26487295

  12. [Problems of fluoride dosing to infants for dental fluorosis prevention].

    PubMed

    Davydov, B N; Borinskaia, E Iu; Kushnir, S M; Borinskiĭ, Iu N; Beliaev, V V

    2011-01-01

    Fluoride content in drinking water, breast milk, cow milk, additional food for newborns prepared with water containing different amount of fluoride was determined. Fluoride excretion in urine since the first days of birth and up to 4 months of postnatal development was investigated in breast and artificially fed infants. When a neonate was fed with breast milk, fluoride was received in the amount no more than 20 mkg/day. The additional food contained fluoride which water mainly had. Water with high level of fluorine increased its content in the additional food up to the values not comparable to those in breast milk that presented danger of dental fluorosis development. Data on fluorine content in drinking water were absolutely necessary to calculate daily fluorides consumption by infants and to prevent dental fluorosis. PMID:21378727

  13. Distribution of fluoride in ground water of West Virginia

    USGS Publications Warehouse

    Mathes, M.V.; Waldron, M.C.

    1993-01-01

    This report describes the results of a study by the U.S. Geological Survey, in cooperation with the West Virginia Geological and Economic Survey, to evaluate the distribution of fluoride in ground water of West Virginia. Fluoride is a natural chemical constituent in domestic and public water supplies in West Virginia. Fluoride concentrations of about 1.0 milligram per liter in drinking water are beneficial to dental health. Concentrations greater than 2.0 milligrams per liter, however, could harm teeth and bones. Fluoride concentra- tions in ground water of West Virginia range from less than 0.1 to 12 milligrams per liter. Fluoride concentrations that exceed 2.0 milligrams per liter are found in wells drilled to all depths, wells drilled in all topographic settings, and wells drilled into most geologic units. Most fluoride concentrations that exceed 2.0 milligrams per liter are located at sites clustered in the northwestern part of the State.

  14. Bone scintigraphy in fluoride treated osteoporosis

    SciTech Connect

    Froelich, J.W.; Kleerekoper, M.; Parker, D.A.

    1985-05-01

    Quantitative bone scintigraphy was performed on 23 white females with post-menopausal osteoporosis and vertebral compression fractures. These patients were then entered into a randomized, double-blind clinical trial or sodium fluoride therapy (NaF=14, placebo=9) which included repeat bone scintigraphy every six months. Scintigraphic images were acquired for 500K counts per image over the total body with computer acquisition over the posterior thoracic and lumbar spine. Images were obtained on a wide field-of-view gamma camera two hours after injecting 15 mCi of Tc-99m MDP. Data analysis showed a significant reduction in the activity ratio of abnormal vertebral body to normal vertebral body in those patients treated with sodium fluoride (paired t-test p=0.0095). No significant change was observed in the control group of (p=0.142). These results suggest that sodium fluoride therapy promotes more rapid healing of osteoporotic vertebral fractures. They also demonstrate the utility of serial quantitative bone scintigraphy in assessing osteoporotic patients with vertebral compression fractures.

  15. Effects of a documented hydrogen fluoride leak

    SciTech Connect

    Feder, W.A.

    1985-01-01

    At about 6 a.m. on June 19, 1984, 1037 liters of pressurized HF liquid escaped from a storage tank through a 2 mm diameter hole. 48 hours after the leak was discovered and sealed, visible injury to vegetation was observed 2 miles downwind of the source in a tear drop pattern. Injury symptoms ranged from a slight browning of leaves and needles to death of twigs and leaves and needles. Poplar, white pine, spruce, oak, red maple and several herbaceous plant species were injured. Ragweed was not injured but sensitive fern was severely injured. Goldenrod was also injured but recovered within 3 weeks after exposure. White pine trees within 1/4 of a mile from the source were killed. Fluoride analysis of tissues from upwind and downwind trees and herbaceous plants revealed fluoride tissue levels ranging from 5 to 34,000 ppm. Examples of distance/concentration are given. Soils revealed fluoride levels of about 1 ppm at all locations.

  16. Density and surface tension of melts of zirconium and hafnium fluorides with lithium fluoride

    SciTech Connect

    Katyshev, S.F.; Artemov, V.V.; Desyatnik, V.N.

    1988-06-01

    A study was conducted to determine the temperature dependence of the density and surface tension of melts of LiF-ZrF/sub 4/ and LiF-HfF/sub 4/. Density and surface tension were determined by the method of maximum pressure in an argon bubble. On the basis of experimental data over the entire concentration range the molar volumes and their relative deviations from the additive molar volumes were calculated for 1100/sup 0/K. The positive deviations of the molar volumes from additivity in the LiF-HfF/sub 4/ system (22.45%) were greater than in the LiF-ZrF/sub 4/ system (15.75%). This indicated that the reaction with lithium fluoride is intensified with the switch to the hafnium fluoride. Results also demonstrated that the fluorides are surface-active components in the molten mixtures.

  17. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standard for fluorides. 60.202 Section... Industry: Wet-Process Phosphoric Acid Plants § 60.202 Standard for fluorides. (a) On and after the date on... facility any gases which contain total fluorides in excess of 10.0 g/Mg of equivalent P2O5 feed (0.020...

  18. Fluoride use in caries prevention in the primary care setting.

    PubMed

    Clark, Melinda B; Slayton, Rebecca L

    2014-09-01

    Dental caries remains the most common chronic disease of childhood in the United States. Caries is a largely preventable condition, and fluoride has proven effectiveness in the prevention of caries. The goals of this clinical report are to clarify the use of available fluoride modalities for caries prevention in the primary care setting and to assist pediatricians in using fluoride to achieve maximum protection against dental caries while minimizing the likelihood of enamel fluorosis. PMID:25157014

  19. Urinary fluoride as an exposure index in aluminum smelting.

    PubMed

    Seixas, N S; Cohen, M; Zevenbergen, B; Cotey, M; Carter, S; Kaufman, J

    2000-01-01

    Urinary fluoride was evaluated as an exposure index for a prospective study of asthma in an aluminum smelter. Two studies were conducted to evaluate the relationship between airborne exposure and urinary excretion over a workweek, and to describe exposures among jobs and over time. Thirty-two subjects were evaluated on Days 1 and 3 of a 3-day workweek. On each day, spot urine samples were collected prior to the start of work and again at the end of the shift. Samples were analyzed for fluoride and expressed as milligrams fluoride per gram of creatinine. Airborne exposures to total particulate, fluoride particulate, and hydrogen fluoride (HF; using a 37-mm filter cassette containing a filter and treated back-up pad) were also evaluated on each subject. In the second study, postshift urine samples were collected from asthma study volunteers in three surveys extending over 1.5 years and analyzed for fluoride. Average airborne exposures were 15.7, 4.1, and 0.7 mg/m3 for particulates, particulate fluorides and HF, respectively, and were substantially higher among carbon setters than other workers. However, average urine fluorides among the same workers were reasonably low, 1.3 and 3.0 mg/g creatinine in pre- and postshift urine samples, respectively. Carbon setters, who routinely wore respiratory protection during high exposure periods, had urinary fluoride levels similar to those of other potroom personnel. A significant variation in dose, as expressed by postshift urinary fluoride levels, was observed between potroom and nonpotroom jobs and over three survey periods. These results suggest that postshift urinary fluorides provide a reasonable exposure index for surveillance of exposure levels for an epidemiologic study, and that a substantial variation of exposure occurs between jobs and over time. Although urinary fluorides may be used for exposure surveillance, additional details on individual exposure agents and patterns of exposure over time are required for

  20. 40 CFR 60.192 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.192 Section... Plants § 60.192 Standard for fluorides. (a) On and after the date on which the initial performance test... total fluorides, as measured according to § 60.195, in excess of: (1) 1.0 kg/Mg (2.0 lb/ton) of...

  1. 40 CFR 60.202 - Standard for fluorides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standard for fluorides. 60.202 Section... Industry: Wet-Process Phosphoric Acid Plants § 60.202 Standard for fluorides. (a) On and after the date on... facility any gases which contain total fluorides in excess of 10.0 g/Mg of equivalent P2O5 feed (0.020...

  2. Effect of a-site cation deficiency and YSZ additions on sintering and properties of doped lanthanum manganite

    SciTech Connect

    Stevenson, J.W.; Armstrong, T.R.; Weber, W.J.

    1995-06-01

    The sintering behavior of Ca- and Sr-doped lanthanum manganite (the preferred SOFC cathode material) is highly dependent on the relative proportion of A and B site cations in the material. In general, A-site cation deficiency increases sintered density. The effect of additions of YSZ to lanthanum manganite (to expand the reactive region at the cathode/electrolyte interface and improve thermal expansion and sintering shrinkage matches) on sintering and other properties will also be reported.

  3. Facile preparation of apatite-type lanthanum silicate by a new water-based sol–gel process

    SciTech Connect

    Yamagata, Chieko; Elias, Daniel R.; Paiva, Mayara R.S.; Misso, Agatha M.; Castanho, Sonia R.H. Mello

    2013-06-01

    Highlights: ► We use a Na{sub 2}SiO{sub 3} waste solution as source of Si. ► We present a simple, rapid and low temperature method of lanthanum silicate apatite preparation. ► TEOS, a high cost reagent, was successfully substituted by a cheap price Na{sub 2}SiO{sub 3}, to obtain pure La{sub 9.56}(SiO{sub 4})6O{sub 2.33} lanthanum silicate apatite. - Abstract: In recent years, apatite-type lanthanum silicates ([Ln{sub 10−x}(XO{sub 4})6O{sub 3–1.5x}] (X = Si or Ge)) have been studied for use in SOFC (solid oxide fuel cells), at low temperature (600–800 °C), due to its ionic conductivity which is higher than that of YSZ (Yttrium Stabilized Zirconia) electrolyte. For this reason they are very promising materials as solid electrolyte for SOFCs. Synthesis of functional nanoparticles is a challenge in the nanotechnology. In this work, apatite-type lanthanum silicate nanoparticles were synthesized by a water-based sol–gel process, i.e., sol–gel technique followed by chemical precipitation of lanthanum hydroxide on the gel of the silica. Na{sub 2}SiO{sub 3} waste solution was used as silica source. Spherical aerogel silica was prepared by acid catalyzed reaction, followed by precipitation of lanthanum hydroxide to obtain the precursor of apatite-type lanthanum silicate. Powders of apatite-type lanthanum silicate achieved from the precursor were characterized by thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area measurements (BET). The apatite phase was formed at 900 °C.

  4. Cochrane reviews on the benefits/risks of fluoride toothpastes.

    PubMed

    Wong, M C M; Clarkson, J; Glenny, A-M; Lo, E C M; Marinho, V C C; Tsang, B W K; Walsh, T; Worthington, H V

    2011-05-01

    This concise review presents two Cochrane Reviews undertaken to determine: (1) the relative effectiveness of fluoride toothpastes of different concentrations in preventing dental caries in children and adolescents; and (2) the relationship between the use of topical fluorides in young children and their risk of developing dental fluorosis. To determine the relative effectiveness of fluoride toothpastes of different concentrations, we undertook a network meta-analysis utilizing both direct and indirect comparisons from randomized controlled trials (RCTs). The review examining fluorosis included evidence from experimental and observational studies. The findings of the reviews confirm the benefits of using fluoride toothpaste, when compared with placebo, in preventing caries in children and adolescents, but only significantly for fluoride concentrations of 1000 ppm and above. The relative caries-preventive effects of fluoride toothpastes of different concentrations increase with higher fluoride concentration. However, there is weak, unreliable evidence that starting the use of fluoride toothpaste in children under 12 months of age may be associated with an increased risk of fluorosis. The decision of what fluoride levels to use for children under 6 years should be balanced between the risk of developing dental caries and that of mild fluorosis. PMID:21248357

  5. The dentist’s role in promoting community water fluoridation

    PubMed Central

    Melbye, Molly L.R.; Armfield, Jason M.

    2013-01-01

    Background and Overview Community water fluoridation is an important public health intervention that reduces oral health disparities and increases the health of the population. Promotion of its safety and effectiveness is critical to maintaining its widespread acceptance and ensuring its continued use. Dentists are a potentially important source of knowledge regarding the oral health benefits and safety of water fluoridation. However, few dentists regularly discuss fluorides, and water fluoridation in particular, with patients. The authors aim to describe and discuss the role and importance of dentists’ promotion of public water fluoridation, barriers to dentists’ involvement and some approaches that might influence dentists to promote water fluoridation more actively. Conclusions and Practice Implications Ongoing promotion of fluoridation by dentists is a key factor in ensuring sustained municipal water fluoridation. However, current undergraduate dental curricula do not adequately prepare dentists for this role, and continuing dental education may be insufficient to change clinical practice. Although smoking-cessation literature can shed some light on how to proceed, changing dentists’ practice behavior remains a largely unstudied topic. Dental associations are a key resource for dentists, providing information that can assist them in becoming advocates for water fluoridation. PMID:23283928

  6. Aluminum fluoride inhibition of glucocorticoid receptor inactivation and transformation

    SciTech Connect

    Housley, P.R. )

    1990-04-10

    Fluoride, in the presence of aluminum ions, reversibly inhibits the temperature-mediated inactivation of unoccupied glucocorticoid receptors in cytosol preparations from mouse L cells. The effect is concentration-dependent, with virtually complete stabilization of specific glucocorticoid-binding capacity at 2 mM fluoride and 100 microM aluminum. These concentrations of aluminum and fluoride are ineffective when used separately. Aluminum fluoride also stabilizes receptors toward inactivation by gel filtration and ammonium sulfate precipitation. Aluminum fluoride prevents temperature-dependent transformation of steroid-receptor complexes to the DNA-binding state. Aluminum fluoride does not inhibit calf intestine alkaline phosphatase, and unoccupied receptors inactivated by this enzyme in the presence of aluminum fluoride can be completely reactivated by dithiothreitol. The effects of aluminum fluoride are due to stabilization of the complex between the glucocorticoid receptor and the 90-kDa mammalian heat-shock protein hsp90, which suggests that aluminum fluoride interacts directly with the receptor. Endogenous thermal inactivation of receptors in cytosol is not accompanied by receptor dephosphorylation. However, inactivation is correlated with dissociation of hsp90 from the unoccupied receptor. These results support the proposal that hsp90 is required for the receptor to bind steroid and dissociation of hsp90 is sufficient to inactivate the unoccupied receptor.

  7. Mechanistic aspects of the interactions between fluoride and dental enamel.

    PubMed

    ten Cate, J M; Featherstone, J D

    1991-01-01

    For many years after the discovery of its caries preventive effect, fluoride was thought to be primarily active by lowering the solubility of the apatitic mineral phase of the dental hard tissues. Recent findings have shed new light on the mechanisms by which fluoride inhibits or delays dental caries. Fluoride present in the oral fluids alters the rate of the naturally occurring dissolution and reprecipitation processes at the tooth-oral fluid interface. Demineralization of enamel is inhibited by concentrations of fluoride in the sub-ppm range. Likewise, remineralization of incipient caries lesions (the earliest stage of enamel caries) is accelerated by trace amounts of fluoride. As these two processes comprise dental caries the physiological balance between hard tissue breakdown and repair is favorably shifted by fluoride. The driving force for both phenomena is thermodynamic, that is, fluorapatite or a fluoridated hydroxyapatite may form when fluoride is supplied at low concentrations. This article critically reviews the current information about tooth-fluoride interactions, both from laboratory and clinical studies. PMID:1892991

  8. Determination of fluoride in the bottled drinking waters in iran.

    PubMed

    Amanlou, Massoud; Hosseinpour, Maedeh; Azizian, Homa; Khoshayand, Mohammad Reza; Navabpoor, Mojtaba; Souri, Effat

    2010-01-01

    Fluoride is recognized as an effective agent for dental caries prevention. Generally, the main source of fluoride intake is drinking water. In this study, fluoride content in 18 commercial brands of bottled waters was investigated. Six samples from each batch of 18 Iranian commercial brands of bottled waters were supplied. The fluoride content of samples was analyzed by Fluoride Ion Selective Electrode. The mean ± SD fluoride content of the bottled waters was 0.202 ± 0.00152 mg/L with a range from 0.039 to 0.628 mg/L which was lower than the accepted limits for fluoride content of drinking water (1 mg/L). This finding suggested that in the region which water has high fluoride content, drinking bottled water is preferred to drinking tap water, as it could lower the risk of fluorosis. However, the risk of dental caries increases in people who mainly drink bottled waters; thus, they should use fluoride supplements. PMID:24363704

  9. Examination of Liquid Fluoride Salt Heat Transfer

    SciTech Connect

    Yoder Jr, Graydon L

    2014-01-01

    The need for high efficiency power conversion and energy transport systems is increasing as world energy use continues to increase, petroleum supplies decrease, and global warming concerns become more prevalent. There are few heat transport fluids capable of operating above about 600oC that do not require operation at extremely high pressures. Liquid fluoride salts are an exception to that limitation. Fluoride salts have very high boiling points, can operate at high temperatures and low pressures and have very good heat transfer properties. They have been proposed as coolants for next generation fission reactor systems, as coolants for fusion reactor blankets, and as thermal storage media for solar power systems. In each case, these salts are used to either extract or deliver heat through heat exchange equipment, and in order to design this equipment, liquid salt heat transfer must be predicted. This paper discusses the heat transfer characteristics of liquid fluoride salts. Historically, heat transfer in fluoride salts has been assumed to be consistent with that of conventional fluids (air, water, etc.), and correlations used for predicting heat transfer performance of all fluoride salts have been the same or similar to those used for water conventional fluids an, water, etc). A review of existing liquid salt heat transfer data is presented, summarized, and evaluated on a consistent basis. Less than 10 experimental data sets have been found in the literature, with varying degrees of experimental detail and measured parameters provided. The data has been digitized and a limited database has been assembled and compared to existing heat transfer correlations. Results vary as well, with some data sets following traditional correlations; in others the comparisons are less conclusive. This is especially the case for less common salt/materials combinations, and suggests that additional heat transfer data may be needed when using specific salt eutectics in heat transfer

  10. Novel fluorogenic probe for fluoride ion based on the fluoride-induced cleavage of tert-butyldimethylsilyl ether

    NASA Astrophysics Data System (ADS)

    Yang, Xiao-Feng

    2007-06-01

    A highly sensitive and selective fluorogenic probe for fluoride ion, 4-methylumbelliferyl tert-butyldimethylsilyl ether (4-MUTBS), was designed and synthesized. 4-MUTBS was a weakly fluorescent compound and was synthesized via the one-step reaction of 4-MU with tert-butyldimethylsilyl chloride. Upon incubation with fluoride ion in acetone-water solution (7:3, v/v), the Si-O bond of 4-MUTBS was cleaved and highly fluorescent 4-methylumbelliferone (4-MU) was released, hence leading to the fluorescence increase of the reaction solution. The fluorescence increase is linearly with fluoride concentration in the range 50-8000 nmol l -1 with a detection limit of 19 nmol l -1 (3 σ). Because of the high affinity of silicon toward fluoride ion, the proposed probe shows excellent selectivity toward fluoride ion over other anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.

  11. Cariostatic effect of fluoride-containing restorative materials associated with fluoride gels on root dentin

    PubMed Central

    BORGES, Fernanda Tavares; CAMPOS, Wagner Reis da Costa; MUNARI, Lais Sant'ana; MOREIRA, Allyson Nogueira; PAIVA, Saul Martins; MAGALHÃES, Claudia Silami

    2010-01-01

    Secondary caries is still the main cause of restoration replacement, especially on the root surface Objective This in vitro study evaluated the cariostatic effects of fluoride-containing restorative materials associated with fluoride gels, on root dentin. Materials and Methods A randomized complete block design was used to test the effects of the restorative systems, fluoride regimes and the interactions among them at different distances from restoration margins. Standardized cavities were prepared on 240 bovine root specimens and randomly assigned to 15 groups of treatments (n=16). Cavities were filled with the following restorative materials: Ketac-Fil (3M-ESPE); Vitremer (3M-ESPE); Dyract/Prime & Bond NT (Dentsply); Charisma/Gluma One Bond (Heraeus Kulzer) and the control, Z250/Single Bond (3M-ESPE). The specimens were subjected to a pH-cycling model designed to simulate highcaries activity. During the cycles, 1.23% acidulated phosphate fluoride, 2.0% neutral sodium fluoride or deionized/distilled water (control) was applied to the specimens for 4 min. The surface Knoop microhardness test was performed before (KHNi) and after (KHNf) the pH cycles at 100, 200 and 300 mm from the margins. Dentin microhardness loss was represented by the difference in initial and final values (KHNi - KHNf). Data were analyzed by Friedman's and Wilcoxon's tests, ANOVA and Tukey's test (α=5%). Results The interaction of restorative systems and topical treatments was not significant (p=0.102). Dentin microhardness loss was lowest closer to the restoration. Ketac-fil presented the highest cariostatic effect. Vitremer presented a moderate effect, while Dyract and Charisma did not differ from the control, Z250. The effects of neutral and acidulated fluoride gels were similar to each other and higher than the control. Conclusion Conventional and resin-modified glass ionomer cements as well as neutral and acidulated fluoride gels inhibit the progression of artificial caries adjacent to

  12. A study to investigate fluoride contamination and fluoride exposure dose assessment in lateritic zones of West Bengal, India.

    PubMed

    Samal, Alok C; Bhattacharya, Piyal; Mallick, Anusaya; Ali, Md Motakabber; Pyne, Jagadish; Santra, Subhas C

    2015-04-01

    To assess the status of severity of fluoride contamination in lateritic Bankura and Purulia districts of West Bengal, concentrations of fluoride in different water sources and agricultural field soils were investigated. The fluoride content (mg/l) was observed to differ with aquifer depths: 0.19-0.47 in dug wells, 0.01-0.17 in shallow tube wells, and 0.07-1.6 in deep tube wells. Fluoride within the World Health Organization (WHO) prescribed range (1.0-1.5 mg/l) was estimated only in ~17% of the total collected water samples while ~67% showed <0.7 mg/l fluoride and thus may impede in the production and maintenance of healthy teeth and bones of the residents, especially children. Fluoride in water was found to be significantly correlated (r = 0.63) with pH. The exposure dose of fluoride (mg/kg/day) from drinking water in infants, children, and adults was estimated in the ranges 0.02-0.53, 0.01-0.24, and 0.01-0.14, respectively against the standard value of 0.05. A clear risk of dental fluorosis is apparent in infants and children of the study area. The fluoride in soil (55-399 mg/kg) was detected to be significantly correlated with the fluoride content in deep tube wells and soil pH (r = 0.56 and 0.71, respectively). The relationships of soil fluoride with total hardness and that with phosphate were not significant. There is a high possibility of bioaccumulation of fluoride from contaminated soil and water of the study area to cultivated crops. This will enhance the quantity of fluoride intake into human food chain in addition to drinking water pathway. PMID:25408071

  13. Determination of Fluoride in Toothpaste Using an Ion-Selective Electrode

    ERIC Educational Resources Information Center

    Light, Truman S.; Cappuccino, Carleton C.

    1975-01-01

    Outlines the theory of chemical potentiometry, describes the experimental procedure for free fluoride determination, and presents sample data of fluoride concentration for various brands of toothpaste. (GS)

  14. Effect of brushing on fluoride release from 3 bracket adhesives.

    PubMed

    Staley, Robert N; Mack, Steven J; Wefel, James S; Vargas, Marcos A; Jakobsen, Jane R

    2004-09-01

    The purpose of this in vitro study was to compare fluoride ion release from 3 orthodontic bracket adhesives with and without brushing the bracketed teeth with a fluoridated dentifrice. The bracket adhesives included a light-cured composite resin (Transbond; 3M Unitek, Monrovia, Calif), a fluoride-releasing composite resin (Advance; L D Caulk Division, Dentsply International, Milford, Del), and a resin-modified glass ionomer (Fuji Ortho LC; GC America, Alsip, Ill). The teeth in the control group were not bonded with brackets. Sixty extracted human teeth were randomly assigned to 6 groups of 10 each: (1) Transbond, brushed; (2) Advance, brushed; (3) Advance, not brushed; (4) Fuji, brushed; (5) Fuji, not brushed; and (6) control, brushed. After bonding, each tooth was placed in a sealed plastic test tube containing 4 ml of deionized water. The toothpaste used in brushing contained 0.15% weight per volume sodium fluoride, 1500 parts per million parts fluoride (Winter-fresh gel; Colgate-Palmolive Co., New York, NY). Brushing began 24 hours after the teeth were bonded and placed in deionized water. After brushing, the teeth were thoroughly rinsed with deionized water and returned to a sealed test tube. Fluoride measurements were taken before brushing began, at intervals of 72 hours for 22 days, and 90 and 93 days after bonding. Findings included: (1) brushing significantly increased the release of fluoride ions from the teeth in the composite resin and control groups, (2) the enamel crowns of the unbonded control teeth absorbed and re-released a substantial amount of fluoride ions obtained from the toothpaste, (3) the brushed group of teeth bonded with the fluoride-releasing composite resin released significantly more fluoride on the last 4 days that measurements were taken after brushing than the nonbrushed group bonded with the same adhesive, (4) the brushed group of teeth bonded with the resin-modified glass ionomer released significantly more fluoride on the last 4

  15. Total Fluoride Intake by Children from a Tropical Brazilian City.

    PubMed

    Lima, Carolina V; Cury, Jaime A; Vale, Glauber C; Lima, Marina D M; Moura, Lúcia de Fátima A D; Moura, Marcoeli Silva de

    2015-01-01

    The main sources of fluoride intake by children are fluoridated water and toothpaste. Little has been studied regarding fluoride intake from these sources in regions with tropical climates and high temperatures throughout the year. This study aimed to determine the amount of fluoride ingested from diet and tooth brushing by children who live in a city with a tropical climate. Sixty-seven children from Teresina, Piauí, Brazil, took part in this study. The city's water supply was optimally fluoridated. The duplicate-diet method was used to determine the fluoride intake from diet. The intake of fluoride from dentifrice was determined by subtracting the amount of fluoride placed on the toothbrush and that recovered after brushing. The concentration of fluoride was measured using an ion-specific electrode and is expressed as milligrams/kilogram of body weight/day. The mean (±SD) total amount was 0.071 ± 0.036 mg F/kg body weight/day, and the relative contributions of diet and toothpaste were 0.025 ± 0.010 and 0.046 ± 0.035, respectively. The factors associated with fluoride intake from toothpaste were: use of children's toothpaste (p = 0.003), use of large amounts of toothpaste (p < 0.001), and a high frequency of tooth brushing (p = 0.003). Sixty-four percent of children had an intake of less than 0.07 mg F/kg body weight/day, which is considered the upper limit for an aesthetically tolerable fluorosis risk. The results suggest that the amount of fluoride ingested by most children who live in a Brazilian city with a tropical climate is considered safe in terms of the risk of dental fluorosis. PMID:26655142

  16. Highly stable, mesoporous mixed lanthanum-cerium oxides with tailored structure and reducibility

    SciTech Connect

    Liang, Shuang; Broitman, Esteban; Wang, Yanan; Cao, Anmin; Veser, Goetz

    2011-05-01

    Pure and mixed lanthanum and cerium oxides were synthesized via a reverse microemulsion-templated route. This approach yields highly homogeneous and phase-stable mixed oxides with high surface areas across the entire range of La:Ce ratios from pure lanthana to pure ceria. Surprisingly, all mixed oxides show the fluorite crystal structure of ceria, even for lanthanum contents as high as 90%. Varying the La:Ce ratio not only allows tailoring of the oxide morphology (lattice parameter, pore structure, particle size, and surface area), but also results in a fine-tuning of the reducibility of the oxide which can be explained by the creation of oxygen vacancies in the ceria lattice upon La addition. Such finely controlled syntheses, which enable the formation of stable, homogeneous mixed oxides across the entire composition range, open the path towards functional tailoring of oxide materials, such as rational catalyst design via fine-tuning of redox activity.

  17. On magnetic ordering in heavily sodium substituted hole doped lanthanum manganites

    NASA Astrophysics Data System (ADS)

    Sethulakshmi, N.; Unnimaya, A. N.; Al-Omari, I. A.; Al-Harthi, Salim; Sagar, S.; Thomas, Senoy; Srinivasan, G.; Anantharaman, M. R.

    2015-10-01

    Mixed valence manganite system with monovalent sodium substituted lanthanum manganites form the basis of the present work. Lanthanum manganites belonging to the series La1-xNaxMnO3 with x=0.5-0.9 were synthesized using modified citrate gel method. Variation of lattice parameters and unit cell volume with Na concentration were analyzed and the magnetization measurements indicated ferromagnetic ordering in all samples at room temperature. Low temperature magnetization behavior indicated that all samples exhibit antiferromagnetism along with ferromagnetism and it has also been observed that antiferromagnetic ordering dominates ferromagnetic ordering as concentration is increased. Evidence for such a magnetic inhomogeneity in these samples has been confirmed from the variation in Mn3+/Mn4+ ion ratio from X-ray Photoelectron Spectroscopy and from the absorption peak studies using Ferromagnetic Resonance Spectroscopy.

  18. Lanthanum(III)-catalyzed degradation of cellulose at 250 degrees C.

    PubMed

    Seri, Kei-ichi; Sakaki, Tsuyoshi; Shibata, Masao; Inoue, Yoshihisa; Ishida, Hitoshi

    2002-02-01

    Lanthanum(III) chloride was found to effectively catalyze the degradation of cellulose in water at 250 degrees C. The degradation conversion of cellulose in the presence of a catalytic amount of lanthanum chloride reached 80.3% after 180 s, which corresponded to the turnover number of 83, whereas the reaction did scarcely proceed in the absence of the catalyst. The degradation products were separately quantified as water-soluble (WS), methanol-soluble (MS), methanol-insoluble (MI), and gaseous (G) products. The HPLC and GC analyses revealed that the WS materials are mainly composed of 5-hydroxymethyl-2-furaldehyde (HMF), D-glucose, and levulinic acid. Cellobiose, the disaccharide component of cellulose, was scarcely detected during the reaction. PMID:11800491

  19. Plasma Spray Deposition of Lanthanum Phosphate and Phase Structure of the Resultant Coatings

    NASA Astrophysics Data System (ADS)

    Pragatheeswaran, A.; Ananthapadmanabhan, P. V.; Chakravarthy, Y.; Chaturvedi, Vandana; Bhandari, Subhankar; Ramachandran, K.

    2015-12-01

    Plasma-sprayed lanthanum phosphate coatings were prepared on stainless steel substrates at different input powers from 16 to 24 kW. Coatings were characterized by x-ray diffraction, scanning electron microscopy, and Fourier transformed infrared spectroscopy. Results showed that the as-sprayed coatings consist of lanthanum ortho (LaPO4), poly(La2P4O13), and oxy(La3PO7) phosphates. Subsequent heat treatment of the coatings resulted in the recombination of the La-polyphosphate and La-oxyphosphate to form LaPO4. SEM images of microstructure of the coatings and coating-substrate interface showed micro-cracks, voids, and porosity that were found to decrease with deposition power.

  20. Infrared multiple-photon dissociation spectroscopy of tripositive ions: lanthanum-tryptophan complexes.

    PubMed

    Verkerk, Udo H; Zhao, Junfang; Saminathan, Irine S; Lau, Justin Kai-Chi; Oomens, Jos; Hopkinson, Alan C; Siu, K W Michael

    2012-04-16

    Collision-induced charge disproportionation limits the stability of triply charged metal ion complexes and has thus far prevented successful acquisition of their gas-phase IR spectra. This has curtailed our understanding of the structures of triply charged metal complexes in the gas phase and in biological environments. Herein we report the first gas-phase IR spectra of triply charged La(III) complexes with a derivative of tryptophan (N-acetyl tryptophan methyl ester), and an unusual dissociation product, a lanthanum amidate. These spectra are compared with those predicted using density functional theory. The best structures are those of the lowest energies that differ by details in the π-interaction between La(3+) and the indole rings. Other binding sites on the tryptophan derivative are the carbonyl oxygens. In the lanthanum amidate, La(3+) replaces an H(+) in the amide bond of the tryptophan derivative. PMID:22455512

  1. Lanthanum(III) and praseodymium(III) derivatives with dithiocarbamates derived from α-amino acids

    NASA Astrophysics Data System (ADS)

    Rai, Anita; Sengupta, Soumitra K.; Pandey, Om P.

    2006-06-01

    Lanthanum(III) and praseodymium(III) complexes with dithiocarbamates have been synthesized by the reactions of lanthanum(III) and praseodymium(III) chloride with barium dithiocarbamate and complexes of type [LnCl(L)H 2O] n have been obtained (where Ln = La(III) or Pr(III); L = barium salt of dithiocarbamate derived from glycine, L-leucine, L-valine, DL-alanine). The complexes have been characterized by elemental analysis, molar conductance, electronic absorption and fluorescence, infrared, far infrared, 1H NMR spectral studies. The presence of coordinated water molecule is inferred from thermogravimetric analysis which indicates the loss of one water molecule at 150-170 °C. The oscillator strength, Judd-Ofelt intensity parameter, stimulated emission cross-section, etc. have been obtained for different transitions of Pr 3+.

  2. Near fifty percent sodium substituted lanthanum manganites—A potential magnetic refrigerant for room temperature applications

    SciTech Connect

    Sethulakshmi, N.; Anantharaman, M. R.; Al-Omari, I. A.; Suresh, K. G.

    2014-03-03

    Nearly half of lanthanum sites in lanthanum manganites were substituted with monovalent ion-sodium and the compound possessed distorted orthorhombic structure. Ferromagnetic ordering at 300 K and the magnetic isotherms at different temperature ranges were analyzed for estimating magnetic entropy variation. Magnetic entropy change of 1.5 J·kg{sup −1}·K{sup −1} was observed near 300 K. An appreciable magnetocaloric effect was also observed for a wide range of temperatures near 300 K for small magnetic field variation. Heat capacity was measured for temperatures lower than 300 K and the adiabatic temperature change increases with increase in temperature with a maximum of 0.62 K at 280 K.

  3. High-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes

    NASA Technical Reports Server (NTRS)

    Morris, J. F.

    1974-01-01

    Lanthanum-hexaboride electrodes in 1700 K cesium diodes may triple power outputs compared with those demonstrated for nuclear thermionic space applications. Still greater relative gains seem possible for emitters below 1700 K. Further improvements in cesium-diode performance should result from the lower collector temperatures allowed for earth and low-power-space duties. Decreased temperatures will lessen thermal-transport losses that attend thermionic-conversion mechanisms. Such advantages will add to those from collector-Carnot and electrode effects. If plasma ignition difficulties impede diode temperature reductions, recycling small fractions of the output power could provide ionization. So high-efficiency, low-temperature cesium diodes with lanthanum-hexaboride electrodes appear feasible.

  4. Method for decontamination of nickel-fluoride-coated nickel containing actinide-metal fluorides

    DOEpatents

    Windt, N.F.; Williams, J.L.

    In one aspect, the invention comprises contacting nickel-fluoride-coated nickel with gaseous ammonia at a temperature effecting nickel-catalyzed dissociation thereof and effecting hydrogen-reduction of the nickel fluoride. The resulting nickel is heated to form a melt and a slag and to effect transfer of actinide metals from the melt into the slag. The melt and slag are then separated. In another aspect, nickel contianing nickel oxide and actinide metals is contacted with ammonia at a temperature effecting nickel-catalyzed dissociation to effect conversion of the nickel oxide to the metal. The resulting nickel is then melted and separated as described. In another aspect nickel-fluoride-coated nickel containing actinide-metal fluorides is contacted with both steam and ammonia. The resulting nickel then is melted and separated as described. The invention is characterized by higher nickel recovery, efficient use of ammonia, a substantial decrease in slag formation and fuming, and a valuable increase in the service life of the furnace liners used for melting.

  5. CAN FLUORIDATION AFFECT LEAD (II) IN POTABLE WATER? HEXAFLUOROSILICATE AND FLUORIDE EQUILIBRIA IN AQUEOUS SOLUTION

    EPA Science Inventory

    Recent reports have attempted to show that fluoridating potable water is linked to increased levels of lead(II) in the blood. We examine these claims in light of the established science and critically evaluate their significance. The completeness of hexafluorosilicate hydrolysi...

  6. A simple and colorimetric fluoride receptor and its fluoride-responsive organogel.

    PubMed

    Yu, Xudong; Li, Yajuan; Yin, Yaobing; Yu, Decai

    2012-08-01

    In this paper, a new p-nitrophenylhydrozine-based anion receptor 1 containing cholesterol group had been designed and synthesized. It could selectively recognize fluoride among different anions tested with color changes from pale yellow to red for visual detection. Simultaneously, it could gel in cyclohexane, and the gel was also fluoride-responsive. When treated with TBAF (tetra-n-butylammonium fluoride), the gel could undergo gel-sol transition accompanied by color, morphology and surface changes. The binding mechanism had been investigated by UV-vis and (1)HNMR (proton nuclear magnetic resonance spectra) titrations. From SEM (scanning electron microscope), SAXS (small-angle X-ray scattering), IR (Infrared Spectroscopy) and CA (contact angle) experiments, it was indicated that the addition of F(-) could destroy the molecule assembly of host 1 in the gel state, thus resulting in the gel-to-sol transition due to the binding site competition effect. To the best of our knowledge, this was the simplest fluoride-responsive organogel with high selectivity. PMID:24364979

  7. Thermopower of lanthanum monochalcogenides subjected to uniform compression up to 22 GPa

    NASA Astrophysics Data System (ADS)

    Stepanov, N. N.; Morozova, N. V.; Kar'kin, A. E.; Korobeinikov, I. V.; Golubkov, A. V.; Kaminskii, V. V.

    2015-03-01

    It is shown that lanthanum monochalcogenides (LaS, LaSe, LaTe), in which metal ions are trivalent at least up to 22 GPa, may be used as reference materials in finding the stability domains of a variable-valence state in rare-earth elements in different compounds studied under pressure. The thermopower of these materials throughout the pressure interval studied varies between 1 and 4 μV/K.

  8. Room temperature synthesis of high temperature stable lanthanum phosphate–yttria nano composite

    SciTech Connect

    Sankar, Sasidharan; Raj, Athira N.; Jyothi, C.K.; Warrier, K.G.K.; Padmanabhan, P.V.A.

    2012-07-15

    Graphical abstract: A facile aqueous sol–gel route involving precipitation–peptization mechanism followed by electrostatic stabilization is used for synthesizing nanocrystalline composite containing lanthanum phosphate and yttria. Highlights: ► A novel lanthanum phosphate–Y{sub 2}O{sub 3} nano composite is synthesized for the first time using a modified facile sol gel process. ► The composite becomes crystalline at 600 °C and X-ray diffraction pattern is indexed for monoclinic LaPO{sub 4} and cubic yttria. ► The composite synthesized was tested up to 1300 °C and no reaction between the phases of the constituents is observed with the morphologies of the phases being retained. -- Abstract: A facile aqueous sol–gel route involving precipitation–peptization mechanism followed by electrostatic stabilization is used for synthesizing nanocrystalline composite containing lanthanum phosphate and yttria. Lanthanum phosphate (80 wt%)–yttria (20 wt%) nano composite (LaPO{sub 4}–20%Y{sub 2}O{sub 3}), has an average particle size of ∼70 nm after heat treatment of precursor at 600 °C. TG–DTA analysis reveals that stable phase of the composite is formed on heating the precursor at 600 °C. The TEM images of the composite show rod shape morphology of LaPO{sub 4} in which yttria is acquiring near spherical shape. Phase identification of the composite as well as the phase stability up to 1300 °C was carried out using X-ray diffraction technique. With the phases being stable at higher temperatures, the composite synthesized should be a potential material for high temperature applications like thermal barrier coatings and metal melting applications.

  9. Optical absorption in ion-implanted lead lanthanum zirconate titanate ceramics

    SciTech Connect

    Seager, C.H.; Land, C.E.

    1984-08-15

    Optical absorption measurements have been performed on unmodified and on ion-implanted lead lanthanum zirconate titanate ceramics using the photothermal deflection spectroscopy technique. Bulk absorption coefficients depend on the average grain size of the material while the absorption associated with the ion-damaged layers does not. The damage-induced surface absorptance correlates well with the photosensitivity observed in implanted PLZT devices, supporting earlier models for the enhanced imaging efficiency of the materials.

  10. Chromium and copper substituted lanthanum nano-ferrites: Their synthesis, characterization and application studies

    NASA Astrophysics Data System (ADS)

    Jauhar, Sheenu; Singhal, Sonal

    2014-10-01

    Nano-crystalline lanthanum ferrites substituted by chromium and copper having formula LaMxFe1-xO3 (M = Cr, Cu; 0.0 ⩽ x ⩽ 0.5) were synthesized using sol-gel auto-combustion method. The formation of ferrite particles was confirmed using Fourier Transform Infra-Red (FT-IR) spectra and powder X-ray Diffraction (XRD) techniques. The entire ferrite compositions were found to be pure phased with same symmetry as LaFeO3. The average crystallite size was calculated to be ∼60 nm. The ferrite compositions were observed to behave as semi-conductors, as their resistivity decreased with increasing temperature. These ferrite compositions were employed as catalysts in the decomposition of hydrogen peroxide solution (0.17 M). Pure LaFeO3 was found to have a very low catalytic activity towards the decomposition of hydrogen peroxide solution, while presence of copper in the lanthanum ferrite lattice was found to significantly enhance its catalytic activity. The rate constant in case of reactions catalysed by LaCu0.5Fe0.5O3 was nearly 25 times larger than that obtained from reactions catalysed by pure LaFeO3. However, chromium substitution was not found to influence the catalytic activity of lanthanum ferrites as chromium substituted lanthanum ferrites exhibited very low catalytic activity. This was explained on the basis of relative stability of oxidation states of the substituent ions and the presence of defects in the crystal lattice.

  11. Optical Restoration of Lead Fluoride Crystals

    SciTech Connect

    Spilker, A.; Cole, P. L.; Forest, T. A.; Mestari, M.; Naeem, S.; LeBaron, N.; Bertin, P.; Camacho, C. Munoz; Roche, J.

    2009-03-10

    Due to its relatively high resistance to high radiation, lead fluoride (PbF{sub 2}) crystals are becoming an increasingly popular material of choice for electromagnetic calorimetry, such as for experiments requiring the measurement of high-energy photons in Hall A of Jefferson Lab. For our studies we irradiated the PbF{sub 2} crystals using an electron linear accelerator (LINAC) followed by exposing the crystals to blue light so as to restore the nominal optical properties. This technique of optical bleaching with blue light affords an efficient and low-cost means for reversing the deleterious effects of optical transmission loss in radiation-damaged lead fluoride crystals. Whereas earlier experiments irradiated the PbF{sub 2} samples with 1.1 and 1.3 MeV gammas from {sup 60}Co, we used pulsed beams of energetic electrons from the tunable 25-MeV LINAC at Idaho Accelerator Center of Idaho State University in Pocatello, Idaho. A 20-MeV beam of electrons was targeted onto four separate 19 cm length samples of lead fluoride over periods of 1, 2, and 4 hours yielding doses between 7 kGy and 35 kGy. Samples were then bleached with blue light of wavelength 410-450 nm for periods between 19.5 and 24 hours. We performed this process twice - radiation, bleaching, radiation, and then followed by bleaching again - for each of these four PbF{sub 2} samples. We shall discuss the efficacy of blue light curing on samples that have undergone two cycles of electron irradiation and optical bleaching.

  12. Preparation and Characterization of Lanthanum-Incorporated Hydroxyapatite Coatings on Titanium Substrates.

    PubMed

    Lou, Weiwei; Dong, Yiwen; Zhang, Hualin; Jin, Yifan; Hu, Xiaohui; Ma, Jianfeng; Liu, Jinsong; Wu, Gang

    2015-01-01

    Titanium (Ti) has been widely used in clinical applications for its excellent biocompatibility and mechanical properties. However, the bioinertness of the surface of Ti has motivated researchers to improve the physicochemical and biological properties of the implants through various surface modifications, such as coatings. For this purpose, we prepared a novel bioactive material, a lanthanum-incorporated hydroxyapatite (La-HA) coating, using a dip-coating technique with a La-HA sol along with post-heat treatment. The XRD, FTIR and EDX results presented in this paper confirmed that lanthanum was successfully incorporated into the structure of HA. The La-HA coating was composed of rod-like particles which densely compacted together without microcracks. The results of the interfacial shear strength test indicated that the incorporation of lanthanum increased the bonding strength of the HA coating. The mass loss ratios under acidic conditions (pH=5.5) suggested that the La-HA coatings have better acid resistance. The cytocompatibility of the La-HA coating was also revealed by the relative activity of alkaline phosphatase, cellular morphology and cell proliferation assay in vitro. The present study suggested that La-HA coated on Ti has promising potential for applications in the development of a new type of bioactive coating for metal implants. PMID:26404255

  13. Lanthanum halide scintillators for time-of-flight 3-D pet

    DOEpatents

    Karp, Joel S.; Surti, Suleman

    2008-06-03

    A Lanthanum Halide scintillator (for example LaCl.sub.3 and LaBr.sub.3) with fast decay time and good timing resolution, as well as high light output and good energy resolution, is used in the design of a PET scanner. The PET scanner includes a cavity for accepting a patient and a plurality of PET detector modules arranged in an approximately cylindrical configuration about the cavity. Each PET detector includes a Lanthanum Halide scintillator having a plurality of Lanthanum Halide crystals, a light guide, and a plurality of photomultiplier tubes arranged respectively peripherally around the cavity. The good timing resolution enables a time-of-flight (TOF) PET scanner to be developed that exhibits a reduction in noise propagation during image reconstruction and a gain in the signal-to-noise ratio. Such a PET scanner includes a time stamp circuit that records the time of receipt of gamma rays by respective PET detectors and provides timing data outputs that are provided to a processor that, in turn, calculates time-of-flight (TOF) of gamma rays through a patient in the cavity and uses the TOF of gamma rays in the reconstruction of images of the patient.

  14. Impact of lanthanum carbonate on cortical bone in dialysis patients with adynamic bone disease.

    PubMed

    Yajima, Aiji; Inaba, Masaaki; Tominaga, Yoshihiro; Tanaka, Motoko; Otsubo, Shigeru; Nitta, Kosaku; Ito, Akemi; Satoh, Shigeru

    2013-04-01

    Among the most serious problems in patients with chronic kidney disease (CKD) is fragility of cortical bone caused by cortical thinning and increased cortical porosity; the cortical fragility is sometimes irreversible, with fractures generally initiating from cortical bone. Therefore, development of treatments for problems of cortical bone is urgently desired. Cortical bone has the three surfaces, including the periosteal surface, intracortical spaces and endocortical surface. Bone turnover at the endocortical surface and intracortical resorption spaces are increased as compared with that at cancellous surface. Bone growth sometimes depends on apposition at the periosteal surface. We treated hyperphosphatemia in two hemodialysis patients with adynamic bone disease with 750-1500 mg/day of lanthanum carbonate, which is a non-calcium containing phosphate binder; the treatment resulted in a decrease of the serum phosphorus levels (P levels), without significant change of the serum intact parathyroid hormone levels. We now report that treatment of these patients with lanthanum carbonate increased mineralization of the periosteal surface, increased bone mass within the intracortical resorption spaces and increased mineralization of the minimodeling surface at the endocortical surface. In addition, woven bone volume in cortical bone was decreased and mineralization of bone units, namely, osteons, was increased. Although these findings were not observed across all surfaces of the cortical bone in the patients, it is expected that lanthanum carbonate would increase the cortical stability in CKD patients, with consequent reduction in the fracture rate in these patients. PMID:23586512

  15. Nanocrystalline brookite with enhanced stability and photocatalytic activity: influence of lanthanum(III) doping.

    PubMed

    Perego, Céline; Wang, Yu-Heng; Durupthy, Olivier; Cassaignon, Sophie; Revel, Renaud; Jolivet, Jean-Pierre

    2012-02-01

    Metastable TiO(2) polymorphs are more promising materials than rutile for specific applications such as photocatalysis or catalysis support. This was clearly demonstrated for the anatase phase but still under consideration for brookite, which is difficult to obtain as pure phase. Moreover, the surface doping of anatase with lanthanum ions is known to both increase the thermal stability of the metastable phase and improve its photocatalytic activity. In this study, TiO(2) nanoparticles of almost only the brookite structure were prepared by a simple sol-gel procedure in aqueous solution. The nanoparticles were then doped with lanthanum(III) ions. The thermal stability of the nanoparticles was analyzed by X-ray diffraction and kinetic models were successfully applied to quantify phases evolutions. The presence of surface-sorbed lanthanum(III) ions increased the phase stability of at least 200 °C and this temperature shift was attributed to the selective phase stabilization of metastable TiO(2) polymorphs. Moreover, the combination of the surface doping ions and the thermal treatment induces the vanishing of the secondary anatase phase, and the photocatalytic tests on the doped brookite nanoparticles demonstrated that the doping increased photocatalytic activity and that the extent depended on the duration of the sintering treatment. PMID:22201282

  16. Lanthanum Carbonate Reduces Urine Phosphorus Excretion: Evidence of High-Capacity Phosphate Binding

    PubMed Central

    Pennick, Michael; Poole, Lynne; Dennis, Kerry; Smyth, Michael

    2012-01-01

    The effectiveness of phosphate binders can be assessed by evaluating urinary phosphorus excretion in healthy volunteers, which indicates the ability of the phosphate binder to reduce gastrointestinal phosphate absorption. Healthy volunteers were enrolled into one of five separate randomized trials; four were open label and one double blind. Following a screening period of <28 days, participants received differing tablets containing lanthanum carbonate [LC, 3000 mg/day of elemental lanthanum (in one study other doses were also used)]. Participants received a standardized phosphate diet and remained in the relevant study center throughout the duration of each treatment period. The end point in all studies was the reduction in urinary phosphorus excretion. Reductions in mean 24-h urinary phosphorus excretion in volunteers receiving a lanthanum dose of 3000 mg/day were between 236 and 468 mg/day over the five separate studies. These data in healthy volunteers can be used to estimate the amount of reduction of dietary phosphate absorption by LC. The reduction in 24-h urinary phosphorus excretion per tablet was compared with published data on other phosphate binders. Although there are limitations, evidence suggests that LC is a very effective phosphate binder in terms of binding per tablet. PMID:22250993

  17. Facile and efficient one-pot synthesis of benzimidazoles using lanthanum chloride

    PubMed Central

    2013-01-01

    Background We report the synthesis of benzimidazoles using lanthanum chloride as an efficient catalyst. One-pot synthesis of 2-substituted benzimidazole derivatives from o-phenylenediamine and a variety of aldehydes were developed under mild reaction conditions. Results We have examined the effect of different solvents using the same reaction conditions. The yield of the product varied with the nature of the solvents, and better conversion and easy isolation of products were found with acetonitrile. In a similar manner, the reaction with o-phenylenediamine and 3,4,5-trimethoxybenzaldehyde was carried out without any solvents. The observation shows that the reaction was not brought into completion, even after starting for a period of 9 h, and the reaction mixture showed a number of spots in thin-layer chromatography. Conclusions In conclusion, lanthanum chloride has been employed as a novel and efficient catalyst for the synthesis of benzimidazoles in good yields from o-phenylenediamine and a wide variety of aldehydes. All of the reactions were carried out in the presence of lanthanum chloride (10 mol%) in acetonitrile at room temperature. PMID:23919542

  18. Preparation and Characterization of Lanthanum-Incorporated Hydroxyapatite Coatings on Titanium Substrates

    PubMed Central

    Lou, Weiwei; Dong, Yiwen; Zhang, Hualin; Jin, Yifan; Hu, Xiaohui; Ma, Jianfeng; Liu, Jinsong; Wu, Gang

    2015-01-01

    Titanium (Ti) has been widely used in clinical applications for its excellent biocompatibility and mechanical properties. However, the bioinertness of the surface of Ti has motivated researchers to improve the physicochemical and biological properties of the implants through various surface modifications, such as coatings. For this purpose, we prepared a novel bioactive material, a lanthanum-incorporated hydroxyapatite (La-HA) coating, using a dip-coating technique with a La-HA sol along with post-heat treatment. The XRD, FTIR and EDX results presented in this paper confirmed that lanthanum was successfully incorporated into the structure of HA. The La-HA coating was composed of rod-like particles which densely compacted together without microcracks. The results of the interfacial shear strength test indicated that the incorporation of lanthanum increased the bonding strength of the HA coating. The mass loss ratios under acidic conditions (pH = 5.5) suggested that the La-HA coatings have better acid resistance. The cytocompatibility of the La-HA coating was also revealed by the relative activity of alkaline phosphatase, cellular morphology and cell proliferation assay in vitro. The present study suggested that La-HA coated on Ti has promising potential for applications in the development of a new type of bioactive coating for metal implants. PMID:26404255

  19. Single crystal growth and characterization of lanthanum-neodymium oxalate octahydrate

    NASA Astrophysics Data System (ADS)

    Want, Basharat

    2011-11-01

    Single crystals of mixed lanthanum-neodymium oxalates are grown by gel diffusion method using agar gel as a medium of growth. The crystals grow in the agar gel with hexagonal morphology having (001), (110) and (010) as habit faces. Single crystal X-ray diffraction results show that the crystals belong to monoclinic system with cell parameters; a=10.344(2) Å, b=9.643(6) Å, c=11.721(2) Å, β=118.7 (2)° , bearing the space group P2/c. Fourier transform infrared spectrum of the crystals indicates the presence of water and other functional groups associated with the oxalate ions. Thermogravimetric and differential thermal analysis support the presence of 8H 2O molecules attached to the lanthanum-neodymium crystal lattice. The thermal decomposition in the nitrogen atmosphere leads to the formation of mixed lanthanum-neodymium oxide as the final product. Energy dispersive analysis of X-rays along with elemental analysis suggests the stoichiometry of the gel grown crystals to be La 1.5Nd 0.5(C 2O 4) 3·8H 2O.

  20. A health risk assessment for fluoride in Central Europe.

    PubMed

    Fordyce, F M; Vrana, K; Zhovinsky, E; Povoroznuk, V; Toth, G; Hope, B C; Iljinsky, U; Baker, J

    2007-04-01

    Like many elements, fluorine (which generally occurs in nature as fluoride) is beneficial to human health in trace amounts, but can be toxic in excess. The links between low intakes of fluoride and dental protection are well known; however, fluoride is a powerful calcium-seeking element and can interfere with the calcified structure of bones and teeth in the human body at higher concentrations causing dental or skeletal fluorosis. One of the main exposure routes is via drinking water and the World Health Organisation currently sets water quality guidelines for the element. In Central Europe, groundwater resources that exceed the guideline value of 1.5 mg l-1 are widespread and effects on health of high fluoride in water have been reported. The aim of the current project was to develop a geographic information system (GIS) to aid the identification of areas where high-fluoride waters and fluorosis may be a problem; hence, where water treatment technologies should be targeted. The development of the GIS was based upon the collation and digitisation of existing information relevant to fluoride risk in Ukraine, Moldova, Hungary and Slovakia assembled for the first time in a readily accessible form. In addition, geochemistry and health studies to examine in more detail the relationships between high-fluoride drinking waters and health effects in the population were carried out in Moldova and Ukraine demonstrating dental fluorosis prevalence rates of 60-90% in adolescents consuming water containing 2-7 mg l-1 fluoride. PMID:17256094

  1. REVIEWS OF THE ENVIRONMENTAL EFFECTS OF POLLUTANTS: IX. FLUORIDE

    EPA Science Inventory

    This document is a review of the scientific literature on the biological and environmental effects of fluoride. Included in the review are a general summary and a comprehensive discussion of the following topics as related to fluoride and specific fluorine-containing compounds: p...

  2. Applications Of Graphite Fluoride Fibers In Outer Space

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheng; Long, Martin; Dever, Therese

    1993-01-01

    Report characterizes graphite fluoride fibers made from commercially available graphitized carbon fibers and discusses some potential applications of graphite fluoride fibers in outer space. Applications include heat-sinking printed-circuit boards, solar concentrators, and absorption of radar waves. Other applications based on exploitation of increased resistance to degradation by atomic oxygen, present in low orbits around Earth.

  3. 7 CFR 305.8 - Sulfuryl fluoride treatment schedules.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Sulfuryl fluoride treatment schedules. 305.8 Section 305.8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH... fluoride treatment schedules. Treatment schedule Pressure Temperature ( °F) Dosage rate(lb/1000 cubic...

  4. Fluoride Analysis. Training Module 5.200.2.77.

    ERIC Educational Resources Information Center

    Kirkwood Community Coll., Cedar Rapids, IA.

    This document is an instructional module package prepared in objective form for use by an instructor familiar with fluoride analysis procedures. Included are objectives, an instructor guide, student handouts, and a list of reference material. This module considers the determination of fluoride in water supplies using the SPANDS and electrode…

  5. Methods of controlling hydrogen fluoride pressure during chemical fabrication processes

    SciTech Connect

    Solovyov, Vyacheslav; Wiesmann, Harold

    2009-11-24

    The present invention is a method for producing a crystalline end-product. The method comprising exposing a fluoride-containing precursor to a hydrogen fluoride absorber under conditions suitable for the conversion of the precursor into the crystalline end-product.

  6. Fluoride and children's intelligence: a meta-analysis.

    PubMed

    Tang, Qin-Qing; Du, Jun; Ma, Heng-Hui; Jiang, Shao-Jun; Zhou, Xiao-Jun

    2008-01-01

    This paper presents a systematic review of the literature concerning fluoride that was carried out to investigate whether fluoride exposure increases the risk of low intelligence quotient (IQ) in China over the past 20 years. MEDLINE, SCI, and CNKI search were organized for all documents published, in English and Chinese, between 1988 and 2008 using the following keywords: fluorosis, fluoride, intelligence, and IQ. Further search was undertaken in the website www.fluorideresearch.org because this is a professional website concerning research on fluoride. Sixteen case-control studies that assessed the development of low IQ in children who had been exposed to fluoride earlier in their life were included in this review. A qualitative review of the studies found a consistent and strong association between the exposure to fluoride and low IQ. The meta-analyses of the case-control studies estimated that the odds ratio of IQ in endemic fluoride areas compared with nonfluoride areas or slight fluoride areas. The summarized weighted mean difference is -4.97 (95%confidence interval [CI] = -5.58 to -4.36; p < 0.01) using a fixed-effect model and -5.03 (95%CI = -6.51 to 3.55; p < 0.01) using a random-effect model, which means that children who live in a fluorosis area have five times higher odds of developing low IQ than those who live in a nonfluorosis area or a slight fluorosis area. PMID:18695947

  7. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  8. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  9. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  10. 21 CFR 175.270 - Poly(vinyl fluoride) resins.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... polymerization of vinyl fluoride. (b) The poly(vinyl fluoride) basic resins have an intrinsic viscosity of not... Dilute Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference. Copies may be... Solution Viscosity of Vinyl Chloride Polymers,” which is incorporated by reference; see paragraph (b)...

  11. PILOT STUDY OF FLUORIDE AND ARSENIC REMOVAL FROM POTABLE WATER

    EPA Science Inventory

    Pilot plant studies were conducted on the removal of fluoride and arsenic from potable water using activated alumina as the adsorbent. The tests were run using water from the community of Why, Arizona, that contained 3 mg/L fluoride and 0.15 mg/L arsenic. The experimental data sh...

  12. Preparation of thin film silver fluoride electrodes from constituent elements

    NASA Technical Reports Server (NTRS)

    Odonnell, P. M.

    1972-01-01

    The feasibility of preparing thin-film metal fluoride electrodes from the elemental constituents has been demonstrated. Silver fluoride cathodes were prepared by deposition of silver on a conducting graphite substrate followed by fluorination under controlled conditions using elemental fluorine. The resulting electrodes were of high purity, and the variables such as size, shape, and thickness were easily controlled.

  13. Preparation of high purity copper fluoride by fluorinating copper hydroxyfluoride

    NASA Technical Reports Server (NTRS)

    King, R. B.; Lundquist, J. R.

    1969-01-01

    Copper fluoride containing no more than 50 ppm of any contaminating element was prepared by the fluorination of copper hydroxyfluoride. The impurity content was obtained by spark source mass spectrometry. High purity copper fluoride is needed as a cathode material for high energy density batteries.

  14. Carbide-fluoride-silver self-lubricating composite

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E. (Inventor)

    1987-01-01

    A self-lubricating, friction and wear reducing composite material is described for use over a wide temperature spectrum from cryogenic temperature to about 900 C in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  15. Carbide/fluoride/silver self-lubricating composite

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E. (Inventor)

    1988-01-01

    A self-lubricating, friction and wear reducing composite material for use over a wide temperature spectrum from cryogenic temperature to about 900.degree. C. in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  16. Hydrolysis of iron and chromium fluorides: mechanism and kinetics.

    PubMed

    Gálvez, José L; Dufour, Javier; Negro, Carlos; López-Mateos, Federico

    2008-06-15

    Fluoride complexes of metallic ions are one of the main problems when processing industrial effluents with high content of fluoride anion. The most important case is derived from pickling treatment of stainless steel, which is performed with HNO3/HF mixtures to remove oxides scale formed over the metal surface. Waste from this process, spent pickling liquor, must be treated for recovering metallic and acid content. Conventional treatments produce a final effluent with high quantity of fluoride complexes of iron and chromium. This work proposes a hydrolysis treatment of these solid metal fluorides by reacting them with a basic agent. Metal oxides are obtained, while fluoride is released to solution as a solved salt, which can be easily recovered as hydrofluoric acid. Solid iron and chromium fluorides, mainly K2FeF5(s) and CrF3(s), obtained in the UCM treatment process, were employed in this work. Optimal hydrolysis operating conditions were obtained by means of a factorial design: media must be basic but pH cannot be higher than 9.5, temperature from 40 to 70 degrees C and alkali concentration (potassium hydroxide) below 1.1 mol L(-1). Secondary reactions have been detected, which are probably due to fluoride adsorption onto obtained oxides surface. Mechanism of reaction consists of several stages, involving solid fluoride dissolution and complexes decomposition. Hydrolysis kinetics has been modeled with classical crystal dissolution kinetics, based on mass transfer phenomena. PMID:17988794

  17. Fluoride exposure and childhood osteosarcoma: a case-control study.

    PubMed Central

    Gelberg, K H; Fitzgerald, E F; Hwang, S A; Dubrow, R

    1995-01-01

    OBJECTIVES. This study tests the hypothesis that fluoride exposure in a nonoccupational setting is a risk factor for childhood osteosarcoma. METHODS. A population-based case-control study was conducted among residents of New York State, excluding New York City. Case subjects (n = 130) were diagnosed with osteosarcoma between 1978 and 1988, at age 24 years or younger. Control subjects were matched to case subjects on year of birth and sex. Exposure information was obtained by a telephone interview with the subject, parent, or both. RESULTS. Based on the parents' responses, total lifetime fluoride exposure was not significantly associated with osteosarcoma among all subjects combined or among females. However, a significant protective trend was observed among males. Protective trends were observed for fluoridated toothpaste, fluoride tablets, and dental fluoride treatments among all subjects and among males. Based on the subjects' responses, no significant associations between fluoride exposure and osteosarcoma were observed. CONCLUSIONS. Fluoride exposure does not increase the risk of osteosarcoma and may be protective in males. The protective effect may not be directly due to fluoride exposure but to other factors associated with good dental hygiene. There is also biologic plausibility for a protective effect. PMID:7503344

  18. Ionometric determination of fluorides at low temperatures

    SciTech Connect

    Kostyukova, I.S.; Ennan, A.A.; Dzerzhko, E.K.; Leivikova, A.A.

    1995-12-01

    A method for determining fluoride ions in solution at low temperatures using a solid-contact fluorine-selective electrode (FSE) has been developed. The effect of temperature (60 to -15{degrees}C) on the calibration slope, potential equilibrium time, and operational stability is studied; the effect of an organic additive (cryoprotector) on the calibration slope is also studied. The temperature relationships obtained for the solid-contact FSEs allow appropriate corrections to be applied to the operational algorithm of the {open_quotes}Ftoring{close_quotes} hand-held semiautomatic HF gas analyzer for the operational temperature range of -16 to 60{degrees}C.

  19. Development and validation of an ion chromatography method for the determination of phosphate-binding of lanthanum carbonate.

    PubMed

    Samy, Raghu; Faustino, Patrick J; Adams, Wallace; Yu, Lawrence; Khan, Mansoor A; Yang, Yongsheng

    2010-04-01

    Lanthanum carbonate is indicated to reduce serum phosphate in patients with end stage renal disease (ESRD). When given orally, lanthanum carbonate dissociates in the acid environment of the upper gastrointestinal tract to release lanthanum ions. The free lanthanum ions bind with dietary phosphate released from food during digestion to form highly insoluble lanthanum-phosphate complexes which prevent the absorption of phosphate, consequently reduce the serum phosphate. In order to evaluate the in vitro binding capacity of lanthanum carbonate, a simple and efficient ion chromatography (IC) method was developed and validated for determination of phosphate across the pH range encountered in the gastrointestinal tract. Chromatographic separation was achieved on a Dionex ICS-2000 IC system using a Dionex AS16, IonPac (4mmx250mm) analytical column and Dionex AG16, IonPac (4mmx50mm) guard column. Column temperature was maintained at 30 degrees C. Injection volume was 10microL. The compounds were eluted isocratically at a flow rate of 1mL/min and detected by suppressed conductivity. The analytical method was validated according to USP Category I requirements. The validation characteristics included accuracy, precision, quantification limit, linearity, and stability. The intra-day accuracy ranged from 89% to 103% for the solutions of pH 1.2-6.8. The intra-day precision (RSD) ranged from 0.6% to 3.7% for the solutions of pH 1.2-6.8. The analytical range was linear from 2 to 200ppm (mg/L). The R(2) ranged from 0.9998 to 1.0. This method was found to be simple, robust, sensitive, specific, and accurate. It has been successfully applied for determination of phosphate binding to lanthanum carbonate over the human gastrointestinal pH range at different time-points (from 0.5 to 24h). PMID:20031362

  20. Fluoride content in caffeinated, decaffeinated and herbal teas.

    PubMed

    Chan, J T; Koh, S H

    1996-01-01

    The fluoride contents of infusions prepared from 44 different brands and types of teas were measured. Fluoride concentrations ranged from 0.34 to 3.71 ppm (mean = 1.50 ppm) in caffeinated tea infusions, 0.02-0.14 ppm (mean = 0.05 ppm) in herbal tea infusions, and 1.01-5.20 ppm (mean = 3.19) in decaffeinated tea infusions. This is the first report of the fluoride content of decaffeinated teas. The mean fluoride content of decaffeinated tea infusions is significantly (p < 0.01) higher than the corresponding caffeinated tea. The use of mineral water containing a naturally high fluoride level during the process of decaffeination is the most likely explanation of the above observation. PMID:8850589

  1. Survey of fluoride levels in vended water stations.

    PubMed

    Jadav, Urvi G; Archarya, Bhavini S; Velasquez, Gisela M; Vance, Bradley J; Tate, Robert H; Quock, Ryan L

    2014-01-01

    This study sought to measure the fluoride concentration of water derived from vended water stations (VWS) and to identify its clinical implications, especially with regard to caries prevention and fluorosis. VWS and corresponding tap water samples were collected from 34 unique postal zip codes; samples were analyzed in duplicate for fluoride concentration. Average fluoride concentration in VWS water was significantly lower than that of tap water (P < 0.001). Fluoride concentration in the VWS water ranged from <0.01 ppm to 0.04 ppm, with a mean concentration of 0.02 ppm (±0.02 ppm). Patients utilizing VWS as their primary source of drinking water may not be receiving optimal caries preventive benefits; thus dietary fluoride supplementation may be indicated. Conversely, to minimize the risk of fluorosis in infants consuming reconstituted infant formula, water from a VWS may be used. PMID:25184716

  2. Ion chromatography detection of fluoride in calcium carbonate.

    PubMed

    Lefler, Jamie E; Ivey, Michelle M

    2011-09-01

    Fluoride in aquatic systems is increasing due to anthropogenic pollution, but little is known about how this fluoride affects organisms that live in and around aquatic habitats. Fluoride can bioaccumulate in structures comprised of calcium carbonate, such as shells and skeletons of both freshwater and saltwater species as diverse as snails, corals, and coccolithophorid algae. In this article, ion chromatography (IC) techniques are developed to detect and quantify fluoride in a matrix of calcium carbonate. Solid samples are dissolved in hydrochloric acid, pretreated to remove the majority of the chloride ions, and then analyzed using IC. With these methods, the 3σ limit of detection is 0.2 mg of fluoride/kg of calcium carbonate. PMID:21859530

  3. Caries prevention through the fluoridation of milk. A review.

    PubMed

    Bánóczy, Jolán; Rugg-Gunn, Andrew J

    2007-10-01

    The aim of this review is to give an overview of 50 years experience of milk fluoridation and draw conclusions about the applicability of the method. Fluoridated milk was first investigated in the early 1950s, almost simultaneously in Switzerland, the USA and Japan. Stimulated by the favourable results obtained from these early studies, the establishment of The Borrow Dental Milk Foundation (subsequently The Borrow Foundation) in England gave an excellent opportunity for further research, both clinical and non-clinical, and a productive collaboration with the World Health Organization from the early 1980s onwards. Numerous peer-reviewed publications in international journals showed clearly the bioavailability of fluoride in milk, and increased concentrations of fluoride in saliva, dental plaque, dental enamel and dentine, and urine, after consumption of fluoridated milk. Clinical trials were initiated in the 1980s--some of these can be classed as randomised controlled trials, while most of the clinical studies were community preventive programs. These evaluations showed clearly that the optimal daily intake of fluoride in milk is effective in preventing dental caries. At present, milk fluoridation programs are running continuously in about ten countries of the world. Fluoridation of milk can be recommended as a caries preventive measure where the fluoride concentration in drinking water is suboptimal, caries experience in children is significant, and there is an existing school milk program. The program should aim to provide fluoridated milk for at least 200 days per year and should commence before the children are 4 years of age. PMID:18078140

  4. Fluoride caused thyroid endocrine disruption in male zebrafish (Danio rerio).

    PubMed

    Jianjie, Chen; Wenjuan, Xue; Jinling, Cao; Jie, Song; Ruhui, Jia; Meiyan, Li

    2016-02-01

    Excessive fluoride in natural water ecosystem has the potential to detrimentally affect thyroid endocrine system, but little is known of such effects or underlying mechanisms in fish. In the present study, we evaluated the effects of fluoride on growth performance, thyroid histopathology, thyroid hormone levels, and gene expressions in the HPT axis in male zebrafish (Danio rerio) exposed to different determined concentrations of 0.1, 0.9, 2.0 and 4.1 M of fluoride to investigate the effects of fluoride on thyroid endocrine system and the potential toxic mechanisms caused by fluoride. The results indicated that the growth of the male zebrafish used in the experiments was significantly inhibited, the thyroid microtrastructure was changed, and the levels of T3 and T4 were disturbed in fluoride-exposed male fish. In addition, the expressional profiles of genes in HPT axis displayed alteration. The expressions of all studied genes were significantly increased in all fluoride-exposed male fish after exposure for 45 days. The transcriptional levels of corticotrophin-releasing hormone (CRH), thyroid-stimulating hormone (TSH), thyroglobulin (TG), sodium iodide symporter (NIS), iodothyronine I (DIO1), and thyroid hormone receptor alpha (TRα) were also elevated in all fluoride-exposed male fish after 90 days of exposure, while the inconsistent expressions were found in the mRNA of iodothyronineⅡ (DIO2), UDP glucuronosyltransferase 1 family a, b (UGT1ab), transthyretin (TTR), and thyroid hormone receptor beta (TRβ). These results demonstrated that fluoride could notably inhibit the growth of zebrafish, and significantly affect thyroid endocrine system by changing the microtrastructure of thyroid, altering thyroid hormone levels and endocrine-related gene expressions in male zebrafish. All above indicated that fluoride could pose a great threat to thyroid endocrine system, thus detrimentally affected the normal function of thyroid of male zebrafish. PMID:26748264

  5. 76 FR 37129 - Determination That SODIUM FLUORIDE F 18 (Sodium Fluoride F-18) Injection, 10 to 200 Millicuries...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... Product List'' section of the Orange Book. In previous instances (see, e.g., 72 FR 9763, March 5, 2007; 61 FR 25497, May 21, 1996), the Agency has determined that, for purposes of Sec. Sec. 314.161 and 314... HUMAN SERVICES Food and Drug Administration Determination That SODIUM FLUORIDE F 18 (Sodium Fluoride...

  6. Industrial Applications of Graphite Fluoride Fibers

    NASA Technical Reports Server (NTRS)

    Hung, Ching-Cheh; Kucera, Donald

    1991-01-01

    Based on fluorination technology developed during 1934 to 1959, and the fiber technology developed during the 1970s, a new process was developed to produce graphite fluoride fibers. In the process, pitch based graphitized carbon fibers are at first intercalated and deintercalated several times by bromine and iodine, followed by several cycles of nitrogen heating and fluorination at 350 to 370 C. Electrical, mechanical, and thermal properties of this fiber depend on the fluorination process and the fluorine content of the graphite fluoride product. However, these properties are between those of graphite and those of PTFE (Teflon). Therefore, it is considered to be a semiplastic. The physical properties suggest that this new material may have many new and unexplored applications. For example, it can be a thermally conductive electrical insulator. Its coefficient of thermal expansion (CTE) can be adjusted to match that of silicon, and therefore, it can be a heat sinking printed circuit board which is CTE compatible with silicon. Using these fibers in printed circuit boards may provide improved electrical performance and reliability of the electronics on the board over existing designs. Also, since it releases fluorine at 300 C or higher, it can be used as a material to store fluorine and to conduct fluorination. This application may simplify the fluorination process and reduce the risk of handling fluorine.

  7. Hydrogen Fluoride in the Local Universe

    NASA Astrophysics Data System (ADS)

    Monje, Raquel R.; Lis, Dariusz C.; Phillips, Thomas G.

    2015-01-01

    The Herschel Space Observatory has provided a unique opportunity to study hydride molecules with large rotational constant in the interstellar medium (ISM) within the nearby universe. Some of the key results from hydride studies with Herschel, and in particular with the Heterodyne Instrument for the Far-Infrared (HIFI), are the first detection at high spectral resolution of the fundamental J = 1 - 0 rotational transition of hydrogen fluoride (HF) at 1.232 THz, and the discovery of its ubiquitous nature within the ISM of the Milky Way galaxy and nearby galaxies. The remarkable Herschel/ HIFI results suggest, that the HF J = 1 - 0 transition promises to yield an extremely sensitive probe of the diffuse molecular gas along the lines of sight toward background far-infrared continuum sources and, as predicted earlier by chemical models, a valuable surrogate for molecular hydrogen in the nearby and high redshift universe. These and other interesting results on hydrogen fluoride from Herschel observations will be presented, as well as the results from follow-up studies from ground-base facilities on hydride molecules towards luminous lensed high-redshifted galaxies with strong submillimeter continuum.

  8. Influence of Growth Mode and Sucrose on Susceptibility of Streptococcus sanguis to Amine Fluorides and Amine Fluoride-Inorganic Fluoride Combinations

    PubMed Central

    Embleton, J. V.; Newman, H. N.; Wilson, M.

    1998-01-01

    This study evaluated the susceptibility to amine fluorides (AmFs) of planktonic and biofilm cultures of Streptococcus sanguis grown with and without sucrose. Cultures were incubated with AmFs (250 mg of fluoride liter−1) for 1 min. The susceptibility of biofilms was less than that of the planktonic form and was further decreased by growth in the presence of sucrose. PMID:9726905

  9. Sources of dietary fluoride intake in 4-year-old children residing in low, medium and high fluoride areas in Iran.

    PubMed

    Zohouri, F V; Rugg-Gunn, A J

    2000-09-01

    Accurate estimation of fluoride dietary intake is desirable for optimising caries prevention. Little is known about the dietary fluoride intake of children aged 4 years, an age when many permanent teeth are forming. This study was undertaken in Fars Province, Iran, in 1995-1996, where there are big differences in temperature between winter and summer. The aims were to determine: (a) the relative contributions of different components of the diet to fluoride intake, (b) the effect of variation in fluoride concentration in drinking water, and (c) the effect of climate temperature. Temperature varied between +40 degrees C in summer to -5 degrees C in winter. The mean fluoride concentrations in drinking water in the three areas were 0.3, 0.6 and 4.0 mgF/L. Dietary information was obtained by two 3-day diet diaries with interview, validated with reference to international standards. The fluoride content of foods was measured using the silicon-facilitated diffusion method. One hundred and three 4-year-old children completed the study. The mean (and 95% confidence interval) dietary fluoride intakes in each of the three areas, respectively, were 413 (+/- 21), 698 (+/- 89) and 3472 (+/- 557) micrograms/day. Drinks provided 72 to 87% of dietary fluoride--this proportion increased with increasing water fluoride concentration and increasing climate temperature. Tea (infusion) was an important source of dietary fluoride, providing 31 to 38% of total dietary intake. Tap water was a more important source of fluoride than soft drinks. Cooked rice and bread were the most important food source of fluoride and the amount of fluoride they contributed increased as water fluoride concentration increased. The results of this first such survey in the Middle East showed (a) that water (as a drink) and tea were by far the most important contributors to dietary fluoride intake, (b) substantial increases in fluoride intake with increasing water fluoride concentrations, and (c) substantially

  10. Lanthanum Nitrate As Electrolyte Additive To Stabilize the Surface Morphology of Lithium Anode for Lithium-Sulfur Battery.

    PubMed

    Liu, Sheng; Li, Guo-Ran; Gao, Xue-Ping

    2016-03-01

    Lithium-sulfur (Li-S) battery is regarded as one of the most promising candidates beyond conventional lithium ion batteries. However, the instability of the metallic lithium anode during lithium electrochemical dissolution/deposition is still a major barrier for the practical application of Li-S battery. In this work, lanthanum nitrate, as electrolyte additive, is introduced into Li-S battery to stabilize the surface of lithium anode. By introducing lanthanum nitrate into electrolyte, a composite passivation film of lanthanum/lithium sulfides can be formed on metallic lithium anode, which is beneficial to decrease the reducibility of metallic lithium and slow down the electrochemical dissolution/deposition reaction on lithium anode for stabilizing the surface morphology of metallic Li anode in lithium-sulfur battery. Meanwhile, the cycle stability of the fabricated Li-S cell is improved by introducing lanthanum nitrate into electrolyte. Apparently, lanthanum nitrate is an effective additive for the protection of lithium anode and the cycling stability of Li-S battery. PMID:26981849

  11. DETERMINATION OF LEAD AND CADMIUM IN FISH AND CLAM TISSUE BY ATOMIC ABSORPTION SPECTROMETRY WITH A MOLYBDENUM AND LANTHANUM TREATED PYROLYTIC GRAPHITE ATOMIZER

    EPA Science Inventory

    A molybdenum and lanthanum treated pyrolytically coated graphite tube is employed for the furnace atomic absorption spectrometric determination of lead and cadmium directly in nitric-perchloric acid tissue digests. Lanthanum tends to promote the formation of a smooth lead atomiza...

  12. Brick tea fluoride as a main source of adult fluorosis.

    PubMed

    Cao, Jin; Zhao, Yan; Liu, Jianwei; Xirao, Ruoden; Danzeng, Sangbu; Daji, Dawei; Yan, Yu

    2003-04-01

    An epidemiological survey was conducted in Naqu County, Tibet in September 2001 to investigate the manifestations of fluorosis in adults caused by the habitual consumption of brick tea. Profiles were obtained for the total daily fluoride intake, environmental fluoride levels and average urinary fluoride concentration, and a physical examination and a skeletal radiographic study were conducted. One hundred and eleven 30-78-year-old adults were enrolled. It was found that the fluoride level of water sources in Naqu County was 0.10+/-0.03 mg/l; no evidence of fluoride air pollution was found, but the brick tea water processed foods--zamba and buttered tea--had fluoride contents of 4.52+/-0.74 mg/kg and 3.21+/-0.65 mg/l, respectively. The adult daily fluoride intake reached 12 mg, of which 99% originated from the brick tea-containing foods. The positive rate of clinical symptoms by physical examination was 89%; furthermore, 42 of the 111 subjects were diagnosed by X-ray. The positive examination rate was 83%. Although the osteosclerosis-type skeletal fluorosis (overall increased bone matrix density) affected 74%, arthropathy and arthritis affected a significant number of the patients, resulting in functional disability. The results suggest that this brick tea-type fluorosis had even more severe adverse effects on human health compared with both the water-type and coal combustion-type fluorosis that occurred in other areas of China. PMID:12615125

  13. Topical fluoride for preventing dental caries in children and adolescents.

    PubMed

    Miller, Faith Y; Campus, Guglielmo; Giuliana, Giovanna; Piscopo, Maria R; Pizzo, Giuseppe

    2012-01-01

    The use of topically applied fluoride has been widely researched as a means to reduce the risk of dental caries in conjunction with other treatment modalities (mechanical oral hygiene, dietary control, antimicrobial intervention, pit and fissure sealants). There is overwhelming evidence that reports not only the significance and importance of the use of fluoride as a caries-preventive agent, but also how safe fluoride application is when used appropriately, particularly in higher risk individuals and populations. This paper reviews the caries-protective benefits of topical fluoride application in children and adolescents, with an emphasis on the clinical efficacy and safety of the vehicles by which fluoride is topically delivered. Fluoride toothpaste represents today the most cost-effective fluoride-delivery system in the oral cavity and its use should be the centerpiece in all caries-preventive strategies. On the other hand, mouthrinses, gels and varnishes currently represent adjuncts to toothpaste use and should be targeted towards individuals and groups at high risk of caries. PMID:22632397

  14. Short-term fluoride release from various aesthetic restorative materials.

    PubMed

    Yap, Adrian U J; Tham, S Y; Zhu, L Y; Lee, H K

    2002-01-01

    The short-term fluoride release of a giomer (Reactmer), a compomer (Dyract AP), a conventional glass ionomer cement (Fuji II Cap) and a resin-modified glass ionomer cement (Fuji II LC) was evaluated and compared. Specimen discs (6 +/-0.2 mm diameter and 1 +/- 0.2 mm thick) were prepared for each material using custom molds. Each disc was placed in 1 ml of deionized for 24 hours at 37 degrees C. After one day, the water was extracted and analyzed. The specimen discs were then re-immersed into another 1 ml of fresh deionized water. The procedure of removing and refilling the water was repeated for 28 days. Sample solutions taken during the first seven days and at days 14, 21 and 28 were introduced into a capillary electrophoresis system using field amplified sample injection (FASI) to determine fluoride release. Data was analyzed using factorial ANOVA/Scheffe's post-hoc test at significance level 0.05. An initial fluoride "burst" effect was observed with glass ionomers. Both compomer and giomer did not show an initial fluoride "burst" effect. With the exception of the compomer, fluoride release at day one was generally significantly greater than at the other time intervals. The glass ionomers released significantly more fluoride than the compomer and giomer at day one. Although fluoride release of the giomer was significantly greater than the other materials at day seven, it became significantly lower at day 28. PMID:12022457

  15. Fluoride occurrence in publicly supplied drinking water in Estonia

    NASA Astrophysics Data System (ADS)

    Karro, Enn; Indermitte, Ene; Saava, Astrid; Haamer, Kadri; Marandi, Andres

    2006-06-01

    A study was undertaken to examine the content and spatial distribution of fluoride in drinking water. Water samples (735) from public water systems covering all Estonian territory were analysed using SPADNS method. In order to specify the natural source of fluoride, the chemistry data from five aquifer systems utilised for water supply were included into the study. Fluoride concentrations in tap water, to a great extent, ranged from 0.01 to 6.95 mg/l. Drinking water in southern Estonia, where terrigenous Middle-Devonian aquifer system is exploited, has a fluoride concentration lower than recommended level (0.5 mg/l), thus promoting susceptibility to dental caries. The western part of the country is supplied by water with excess fluoride content (1.5-6.9 mg/l). Groundwater abstracted for drinking purposes originates from Ordovician and Silurian carbonate rocks. The content of fluoride in Silurian-Ordovician aquifer system is associated with the groundwater abstraction depth and the main controlling factors of dissolved fluoride are the pH value and the chemical type of water.

  16. [Dietary and hygienic aspects of fluoride exposure in pregnant women].

    PubMed

    Chłapowska, Joanna; Opydo-Szymaczek, Justyna

    2004-01-01

    The study was undertaken to assess the exposure of pregnant women to fluoride on the basis of diet preferences and hygienic habits revealed with a questionnaire. The group included 59 women aged 22-39, living in a large urban agglomeration. Questions concerned sources of fluoride such as diet (tap water, tea, fish, poultry), use of fluoride-containing preparations for oral hygiene and substances containing fluoride for additional prophylaxis. The oral health status was clinically examined and caries intensity was assessed with the mean DMF-t index. According to the clinical examination, the mean DMF-t index was 13.64 and ranged from 1 to 23. Consumption of tap water averaged 0.73 L (max. 2.5 L), including 0.55 L (max. 2.5 L) of tea. Poultry was a regular part of the diet in only 14 of the respondents (24%) and only 3 (5%) sporadically (once a week) ate ocean fish. All the respondents used toothpaste containing fluoride, but only 15.3% applied professional prophylaxis with fluoride preparations. As far as the diet is concerned, individual differences in the intake of fluorides were significant. Interestingly, despite the declared everyday use of fluorine-containing toothpaste, the caries intensity index was rather high, suggesting the need for special dental care in this group of patients. PMID:16892578

  17. Serum fluoride and sialic acid levels in osteosarcoma.

    PubMed

    Sandhu, R; Lal, H; Kundu, Z S; Kharb, S

    2011-12-01

    Osteosarcoma is a rare malignant bone tumor most commonly occurring in children and young adults presenting with painful swelling. Various etiological factors for osteosarcoma are ionizing radiation, family history of bone disorders and cancer, chemicals (fluoride, beryllium, and vinyl chloride), and viruses. Status of fluoride levels in serum of osteosarcoma is still not clear. Recent reports have indicated that there is a link between fluoride exposure and osteosarcoma. Glycoproteins and glycosaminoglycans are an integral part of bone and prolonged exposure to fluoride for long duration has been shown to cause degradation of collagen and ground substance in bones. The present study was planned to analyze serum fluoride, sialic acid, calcium, phosphorus, and alkaline phosphatase levels in 25 patients of osteosarcoma and age- and sex-matched subjects with bone-forming tumours other than osteosarcoma and musculo-skeletal pain (controls, 25 each). Fluoride levels were analyzed by ISE and sialic acid was analyzed by Warren's method. Mean serum fluoride concentration was found to be significantly higher in patients with osteosarcoma as compared to the other two groups. The mean value of flouride in patients with other bone-forming tumors was approximately 50% of the group of osteosarcoma; however, it was significantly higher when compared with patients of group I. Serum sialic acid concentration was found to be significantly raised in patients with osteosarcoma as well as in the group with other bone-forming tumors as compared to the group of controls. There was, however, no significant difference in the group of patients of osteosarcoma when compared with group of patients with other bone-forming tumors. These results showing higher level of fluoride with osteosarcoma compared to others suggesting a role of fluoride in the disease. PMID:19390788

  18. Fluoride varnishes with calcium glycerophosphate: fluoride release and effect on in vitro enamel demineralization.

    PubMed

    Carvalho, Thiago Saads; Peters, Bianca Glerean; Rios, Daniela; Magalhães, Ana Carolina; Sampaio, Fabio Correia; Buzalaf, Marília Afonso Rabelo; Bönecker, Marcelo José Strazzeri

    2015-01-01

    The aims of this study were (1) to assess the amount of fluoride (F) released from varnishes containing calcium glycerophosphate (CaGP) and (2) to assess the effect of the experimental varnishes on in vitro demineralization. Six test groups using 5 varnishes: base varnish (no active ingredients); Duraphat® (2.26% NaF); Duofluorid® (5.63% NaF/CaF2); experimental varnish 1 (1% CaGP/5.63% NaF/CaF2); experimental varnish 2 (5% CaGP/5.63% NaF/CaF2); and no varnish were set up. In stage 1, 60 acrylic blocks were randomly distributed into 6 groups (n = 10). Then 300 µg of each varnish was applied to each block. The blocks were immersed in deionized water, which was changed after 1, 8, 12, 24, 48 and 72 hours. Fluoride concentration in the water was analyzed using a fluoride electrode. In stage 2, 60 bovine enamel samples were distributed into 6 groups (n = 10), and treated with 300 µg of the respective varnish. After 6 h the varnish was removed and the samples were subjected to a 7-day in vitro pH cycle (6 h demineralization/18 h remineralization per day). The demineralization was measured using surface hardness. The results showed that both experimental varnishes released more fluoride than Duofluorid® and Duraphat® (p < 0.05), but Duraphat® showed the best preventive effect by decreasing enamel hardness loss (p < 0.05). Therefore, we conclude that even though (1) the experimental varnishes containing CaGP released greater amounts of F, (2) they did not increase in the preventive effect against enamel demineralization. PMID:26176358

  19. Atomic layer deposition of magnesium fluoride via bis(ethylcyclopentadienyl)magnesium and anhydrous hydrogen fluoride

    SciTech Connect

    Hennessy, John Jewell, April D.; Greer, Frank; Lee, Michael C.; Nikzad, Shouleh

    2015-01-15

    A new process has been developed to deposit magnesium fluoride (MgF{sub 2}) thin films via atomic layer deposition (ALD) for use as optical coatings in the ultraviolet. MgF{sub 2} was deposited in a showerhead style ALD reactor using bis(ethylcyclopentadienyl)magnesium and anhydrous hydrogen fluoride (HF) as precursors at substrate temperatures from 100 to 250 °C. The use of HF was observed to result in improved morphology and reduced impurity content compared to other reported MgF{sub 2} ALD approaches that use metal fluoride precursors as the fluorine-containing chemistry. Characterization of these films has been performed using spectroscopic ellipsometry, atomic force microscopy, and x-ray photoelectron spectroscopy for material deposited on silicon substrates. Films at all substrate temperatures were transparent at wavelengths down to 190 nm and the low deposition temperature combined with low surface roughness makes these coatings good candidates for a variety of optical applications in the far ultraviolet.

  20. Public Health Service report on fluoride benefits and risks

    SciTech Connect

    Not Available

    1991-06-14

    This report, Public Health Service Report on Fluoride Benefits and Risks is a summary of the findings, conclusions, and recommendations of Review of Fluoride Benefits and Risks: Report of the Ad Hoc Subcommittee on Fluoride of the Committee to Coordinate Environmental Health and Related Programs, published in February 1991. The full report was prepared by an ad hoc subcommittee of the United States Public Health Service's Committee to Coordinate Environmental Health and Related Programs (CCEHRP) at the request of the Assistant Secretary for Health. The full report can be obtained from the Public Health Service, Department of Health and Human Services.

  1. Progress in heavy metal fluoride glasses for infrared fibers

    NASA Astrophysics Data System (ADS)

    Drexhage, M. G.; El-Bayoumi, O. H.; Moynihan, C. T.

    1982-12-01

    The optical and physical characteristics of heavy metal fluoride glasses are reviewed with reference to recent laboratory experiments. In particular, attention is given to comparative optical studies of fluorozirconate and fluorohafnate glasses, refractive index and material dispersion of fluoride glasses, and preliminary results of optical studies of heavy metal fluoride glasses not containing ZrF4 or HfF4. The latter sometimes exhibit extended transparency in the mid-IR relative to that observed in fluorozirconate and fluorohafnate glasses. The effect of the AlF4 content on the optical properties of BaF2/ThF4 glasses is discussed.

  2. Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

    SciTech Connect

    McNamara, Bruce K.; Scheele, Randall D.; Casella, Andrew M.; Kozelisky, Anne E.

    2011-09-28

    This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

  3. Effects of fluoride emissions on enzyme activity in metabolism of agricultural plants

    SciTech Connect

    Moeri, P.B.

    1980-01-01

    The effects of fluoride on the activity of malatedehydrogenase (MDH) in rape seed and rye grass have been investigated. Fluoride, which has been absorbed from the air, seems to act differently from fluoride added to the soil. The action of airborne fluoride compounds resorbed by the plant on the activity of MDH significantly correlated with the distance from an aluminum plant, crop yield, and fluoride content. 5 references, 5 figures, 2 tables.

  4. Crystallization of heavy metal fluoride glasses

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.; Bruce, Allan J.; Doremus, R. H.; Moynihan, C. T.

    1984-01-01

    The kinetics of crystallization of a number of fluorozirconate glasses were studied using isothermal and dynamic differential scanning calorimetry and X-ray diffraction. The addition of the fluorides LiF, NaF, AlF3, LaF3 to a base glass composition of ZrF4-BaF2 reduced the tendency to crystallize, probably by modifying the viscosity-temperature relation. ZrF4-BaF2-LaF3-AlF3-NaF glass was the most stable against devitrification and perhaps is the best composition for optical fibers with low scattering loss. Some glasses first crystallize out into metastable beta-BaZr2F10 and beta-BaZrF6 phases, which transform into the most stable alpha-phases when heated to higher temperatures. The size of the crystallites was estimated to be about 600 A from X-ray diffraction.

  5. Detection of carbonyl fluoride in the stratosphere

    NASA Technical Reports Server (NTRS)

    Rinsland, C. P.; Park, J. H.; Russell, J. M., III; Zander, R.; Brown, L. R.; Farmer, C. B.; Norton, R. H.; Raper, O. F.

    1986-01-01

    Infrared solar absorption spectra of the stratosphere recorded at a resolution of 0.01/cm by the ATMOS (Atmospheric Trace Molecule Spectroscopy) instrument from onboard Spacelab 3 (04/30 to 05/6/85) have revealed the existence of many previously unobserved absorption features in the 1925 to 1960/cm and 1249 to 1255/cm regions and one at 774/cm. On the basis of comparisons with laboratory spectra, these features have been identified as belonging to the nu1, nu4, and nu6 bands of carbonyl fluoride, respectively. Volume mixing ratios of COF2 between 17 and 40 km have been deduced from analysis of the nu1 and nu6 bands.

  6. High-pressure stabilization of argon fluorides.

    PubMed

    Kurzydłowski, Dominik; Zaleski-Ejgierd, Patryk

    2016-01-28

    On account of the rapid development of noble gas chemistry in the past half-century both xenon and krypton compounds can now be isolated in macroscopic quantities. The same does not hold true for the next lighter group 18 element, argon, which forms only isolated molecules stable solely in low temperature matrices or supersonic jet streams. Here we present theoretical investigations into a new high-pressure reaction pathway, which enables synthesis of argon fluorides in bulk and at room temperature. Our hybrid DFT calculations (employing the HSE06 functional) indicate that above 60 GPa ArF2-containing molecular crystals can be obtained by a reaction between argon and molecular fluorine. PMID:26742478

  7. Fabrication and Testing of Polyvinylidene Fluoride Capacitors

    NASA Technical Reports Server (NTRS)

    Buritz, R. S.

    1980-01-01

    High energy density capacitors made from metallized polyvinylidene fluoride film were built and tested. Terminations of aluminum-babbitt, tin-babbitt, and all-babbitt were evaluated. All-babbit terminations appeared to be better. The 0.1 microfarad and 2 microfarad capacitors were made of 6 micrometer material. Capacitance, dissipation factor, and insulation resistance measurements were made over the ranges -55 C to 125 C and 10 Hz to 100 kHz. Twelve of forty-one 0.1 microfarad capacitors survived a 5000 hour dc plus ac life test. Under the same conditions, the 2 microfarad capacitors exhibited overheating because of excessive power loss. Some failures occurred after low temperature exposures for 48 hours. No failures were caused by vibration or temperature cycling.

  8. Intrinsic Instabilities Of Heavy Metal Fluoride Glasses

    NASA Astrophysics Data System (ADS)

    Bruce, A. J.; Moynihan, C. T.; Loehr, S. R.; Opalka, S. M.; Mossadegh, R.; Perazzo, N. L.; Bansal, N. P.; Doremus, R. H.; Doremus; Drexhage, M. G.

    1985-06-01

    Heavy metal fluoride glasses (HMFG) are potentially useful as optical components in a wide range of devices. Their utilization has so far been delayed mainly because of insufficient material purity and inadequate processing conditions. However, as the result of numerous research efforts, these problems are gradually diminishing, and it now seems likely that the ultimate limitations for use of HMFG components, at least in those applications in which high optical transparency is not a prerequisite, will be imposed by more intrinsic instabilities of the glasses themselves. These include their strong tendency to crystallize on quenching and subsequent reheating, low mechanical and chemical durability, and the possibility that they will undergo significant physical aging in situ. Experimental data relating to these problems have now been obtained, and their relative importance is assessed in this paper.

  9. Intercomparison of measurements of stratospheric hydrogen fluoride

    NASA Technical Reports Server (NTRS)

    Mankin, William G.; Coffey, M. T.; Chance, K. V.; Traub, W. A.; Carli, B.; Mencaraglia, F.; Piccioli, S.; Farmer, C. B.; Seals, R. K.

    1990-01-01

    Observations of the vertical profile of hydrogen fluoride (HF) vapor in the stratosphere and of the vertical column amounts of HF above certain altitudes were made using a variety of spectroscopic instruments in the 1982 and 1983 Balloon Intercomparison Campaigns. Both emission instruments working in the far-infrared spectral region and absorption instruments using solar occultation in the 2.5-micron region were employed. No systematic differences were seen in results from the two spectral regions. A mean profile from 20 - 45 km is presented, with uncertainties ranging from 20 to 50 percent. Total columns measured from ground and from 12 km are consistent with the profile if the mixing ratio for HF is small in the troposphere and low stratosphere.

  10. High-Density, Scintillating, Fluoride Glass Calorimeters

    NASA Astrophysics Data System (ADS)

    Akgun, Ugur; Xie, Qiuchen

    2014-03-01

    The unprecedented radiation levels in current Large Hadron Collider runs, and plans to even increase the luminosity creates a need for new detector technologies to be investigated. Here, we propose to use high density, scintillating, fluoride glasses as active media in calorimeters. CHG3 is a special example of this glass family, which has been developed specifically for hadron collider experiments, and is known for fast response time, in addition to high light yield. In this presentation, the results from a computational study on the performances of the two different designs of CHG3 glass calorimeters are reported. First design reads the signal directly from the edge of the glass plate; the second design utilizes wavelength-shifting fibers to carry the signal out of the glass plate. Each simulation model is a sampling calorimeter with 20 alternating layers of glass and iron absorber. By changing the absorber thickness we tested hadronic as well as electromagnetic capabilities of the calorimeter models.

  11. Using High Fluoride Concentration Products in Public Policy: A Rapid Review of Current Guidelines for High Fluoride Concentration Products.

    PubMed

    Douglas, Gail V A; Ramsdale, Martin P; Vinall-Collier, Karen; Csikar, Julia I

    2016-01-01

    Despite improvements in dental caries levels since the widespread introduction of fluoride toothpastes, it is still a disease which is considered to be a priority in many countries around the world. Individuals at higher risk of caries can be targeted with products with a high fluoride concentration to help reduce the amount and severity of the disease. This paper compares guidance from around the world on the use of products with a high fluoride concentration and gives examples of how guidance has been translated into activity in primary care dental practice. A rapid review of electronic databases was conducted to identify the volume and variation of guidance from national or professional bodies on the use of products with a high fluoride concentration. Fifteen guidelines published within the past 10 years and in English were identified and compared. The majority of these guidelines included recommendations for fluoride varnish use as well as for fluoride gels, while a smaller number offered guidance on high fluoride strength toothpaste and other vehicles. Whilst there was good consistency in recommendations for fluoride varnish in particular, there was sometimes a lack of detail in other areas of recommendation for other vehicles with a high fluoride concentration. There are good examples within the UK, such as the Childsmile project and Delivering Better Oral Health, which highlight that the provision of evidence-based guidance can be influential in directing scarce resources towards oral health improvements. Policy can be influenced by evidence-based national recommendations and used to help encourage dental professionals and commissioners and third-party payers to adopt higher levels of practices aimed at oral health improvement. PMID:27100106

  12. Fluoridated toothpaste: usage and ingestion of fluoride by 4- to 6-yr-old children in England.

    PubMed

    Zohoori, Fatemeh V; Duckworth, Ralph M; Omid, Narges; O'Hare, William T; Maguire, Anne

    2012-10-01

    Fluoridated toothpaste is effective for dental caries control, yet may be a risk factor for dental fluorosis. This study aimed to quantify fluoride ingestion from toothpaste by children and to investigate the effects of age, gender, and social class on the amount of fluoride ingested per toothbrushing session. Sixty-one children, 4-6 yr of age, were recruited: 38 were from low socio-economic (LSE) areas of Newcastle, UK, and 23 were from high socio-economic (HSE) areas of Newcastle, UK. All expectorated saliva, rinse water (if used), and residual toothpaste were collected after brushing at home and were analysed for fluoride. Of the children, 74% and 69% from HSE and LSE areas, respectively, claimed that they brushed twice per day. The mean (SD) weight of toothpaste dispensed was 0.67 (0.36) g. The mean (SD) amount of fluoride ingested per toothbrushing session and per day was 17.0 (14.7) and 29.3 (32.8) μg kg(-1) of body weight, respectively. Daily fluoride intake per kilogram of body weight did not differ significantly between children from LSE and HSE areas. Fluoride intake per toothbrushing session was significantly influenced by weight of toothpaste, its fluoride concentration, and the child's age. Whilst the average amount of toothpaste used per toothbrushing session was more than twice the recommended amount (of 0.25 g), only one child had a daily fluoride intake that exceeded the tolerable upper intake level of 0.1 mg kg(-1) of body weight for this age group. PMID:22984999

  13. Fluoride removal performance of glass derived hydroxyapatite

    SciTech Connect

    Liang, Wen; Zhan, Lei; Piao, Longhua; Russel, Christian

    2011-02-15

    Research highlights: {yields} Novel sodium calcium borate glass derived hydroxyapatite (G-HAP) is prepared. {yields} Micro-G-HAP adsorbs F{sup -} ions in solutions more effectively than commercial nano-HAP. {yields} The adsorption kinetics and isotherms are well fitted by a second order kinetic model and Freundlich isotherm model. -- Abstract: A novel sodium calcium borate glass derived hydroxyapatite (G-HAP) with different ranges of particle size was prepared by immersion sodium calcium borate glass in 0.1 M K{sub 2}HPO{sub 4} solution by the ratio of 50 g L{sup -1} for 7 days. The unique advantage of G-HAP for the adsorption of fluoride ions in solutions was studied. The effects of size and quantity of particles, pH value and adsorption time on adsorption performance were investigated. The maximum adsorption capacity was 17.34 mg g{sup -1} if 5 g L{sup -1}, <100 {mu}m G-HAP was added to a solution with an initial pH value of 6.72 and the adsorption time was 12 h. The results showed that the micro-G-HAP could immobilize F{sup -} in solution more effectively than commercial nano-HAP, which makes potential application of the G-HAP in removing the fluoride ions from wastewater. The adsorption kinetics and isotherms for F{sup -} could be well fitted by a second order kinetic model and Freundlich isotherm model respectively, which could be used to describe the adsorption behavior. The mechanism of G-HAP in immobilizing F{sup -} from aqueous solutions was investigated by the X-ray diffraction (XRD), infrared spectra (IR) and scanning electron microscopy (SEM).

  14. Formation of lithium fluoride/metal nanocomposites for energy storage through solid state reduction of metal fluorides

    SciTech Connect

    Amatucci, GG; Pereira, N; Badway, F; Sina, M; Cosandey, F; Ruotolo, M; Cao, C

    2011-12-01

    In order to utilize high energy metal fluoride electrode materials as direct replacement electrode materials for lithium ion batteries in the future, a methodology to prelithiate the cathode or anode must be developed. Herein, we introduce the use of a solid state Li(3)N route to achieve the lithiation and mechanoreduction of metal fluoride based nanocomposites. The resulting prelithiation was found to be effective with the formation of xLiF:Me structures of very fine nanodimensions analogous to what is found by electrochemical lithiation. Physical and electrochemical properties of these nanocomposites for the bismuth and iron lithium fluoride systems are reported. (C) 2011 Elsevier B.V. All rights reserved.

  15. Lanthanum-catalysed synthesis of microporous 3D graphene-like carbons in a zeolite template

    NASA Astrophysics Data System (ADS)

    Kim, Kyoungsoo; Lee, Taekyoung; Kwon, Yonghyun; Seo, Yongbeom; Song, Jongchan; Park, Jung Ki; Lee, Hyunsoo; Park, Jeong Young; Ihee, Hyotcherl; Cho, Sung June; Ryoo, Ryong

    2016-07-01

    Three-dimensional graphene architectures with periodic nanopores—reminiscent of zeolite frameworks—are of topical interest because of the possibility of combining the characteristics of graphene with a three-dimensional porous structure. Lately, the synthesis of such carbons has been approached by using zeolites as templates and small hydrocarbon molecules that can enter the narrow pore apertures. However, pyrolytic carbonization of the hydrocarbons (a necessary step in generating pure carbon) requires high temperatures and results in non-selective carbon deposition outside the pores. Here, we demonstrate that lanthanum ions embedded in zeolite pores can lower the temperature required for the carbonization of ethylene or acetylene. In this way, a graphene-like carbon structure can be selectively formed inside the zeolite template, without carbon being deposited at the external surfaces. X-ray diffraction data from zeolite single crystals after carbonization indicate that electron densities corresponding to carbon atoms are generated along the walls of the zeolite pores. After the zeolite template is removed, the carbon framework exhibits an electrical conductivity that is two orders of magnitude higher than that of amorphous mesoporous carbon. Lanthanum catalysis allows a carbon framework to form in zeolite pores with diameters of less than 1 nanometre; as such, microporous carbon nanostructures can be reproduced with various topologies corresponding to different zeolite pore sizes and shapes. We demonstrate carbon synthesis for large-pore zeolites (FAU, EMT and beta), a one-dimensional medium-pore zeolite (LTL), and even small-pore zeolites (MFI and LTA). The catalytic effect is a common feature of lanthanum, yttrium and calcium, which are all carbide-forming metal elements. We also show that the synthesis can be readily scaled up, which will be important for practical applications such as the production of lithium-ion batteries and zeolite-like catalyst

  16. Thermochemistry of perovskites in the lanthanum-strontium-manganese-iron oxide system

    NASA Astrophysics Data System (ADS)

    Marinescu, Cornelia; Vradman, Leonid; Tanasescu, Speranta; Navrotsky, Alexandra

    2015-10-01

    The enthalpies of formation from binary oxides of perovskites (ABO3) based on lanthanum strontium manganite La(Sr)MnO3 (LSM) and lanthanum strontium ferrite La(Sr)FeO3 (LSF) and mixed lanthanum strontium manganite ferrite La(Sr)Mn(Fe)O3 (LSMF) were measured by high temperature oxide melt solution calorimetry. Using iodometric titration, the oxygen content was derived. The perovskites with A-site cation deficiency have greater oxygen deficiency than the corresponding A-site stoichiometric series. Stability of LSMF decreases with increasing iron content. Increasing oxygen deficiency clearly destabilizes the perovskites. The results suggest an enthalpy of oxygen incorporation that is approximately independent of composition. 0.35La2O3 (xl, 25 °C)+Mn2O3 (xl, 25 °C)+0.3SrO (xl, 25 °C)+Fe2O3 (xl, 25 °C)+O2 (g, 25 °C)→La0.7Sr0.3Mn1-yFeyO3-δ (xl, 25 °C). (b) ∆ Hf,ox* (La0.7Sr0.3Mn1-yFeyO3-δ) .0.35 La2O3 (xl, 25 ººC) + (0.7-y+ 2δ)/2 Mn2O3 (xl, 25 ºC) + 0.3 SrO (xl, 25 ºC) + y/2Fe2O3 (xl, 25 ºC) + (0.3-2δ) MnO2 (xl, 25 ºC)→La0.7Sr0.3Mn1-yFeyO3-δ (xl, 25 ºC).

  17. Lanthanum oxide-coated stainless steel for bipolar plates in solid oxide fuel cells (SOFCs)

    NASA Astrophysics Data System (ADS)

    Yoon, Jong Seol; Lee, Jun; Hwang, Hae Jin; Whang, Chin Myung; Moon, Ji-Woong; Kim, Do-Hyeong

    Solid oxide fuel cells typically operate at temperatures of about 1000 °C. At these temperatures only ceramic interconnects such as LaCrO 3 can be employed. The development of intermediate-temperature solid oxide fuel cells (IT-SOFCs) can potentially bring about reduced manufacturing costs as it makes possible the use of an inexpensive ferritic stainless steel (STS) interconnector. However, the STS suffers from Cr 2O 3 scale formation and a peeling-off phenomenon at the IT-SOFC operating temperature in an oxidizing atmosphere. Application of an oxidation protective coating is an effective means of providing oxidation resistance. In this study, we coated an oxidation protective layer on ferritic stainless steel using a precursor solution prepared from lanthanum nitrate, ethylene glycol, and nitric acid. Heating the precursor solution at 80 °C yielded a spinable solution for coating. A gel film was coated on a STS substrate by a dip coating technique. At the early stage of the heat-treatment, lanthanum-containing oxides such as La 2O 3 and La 2CrO 6 formed, and as the heat-treatment temperature was increased, an oxidation protective perovskite-type LaCrO 3 layer was produced by the reaction between the lanthanum-containing oxide and the Cr 2O 3 scale on the SUS substrate. As the concentration of La-containing precursor solution was increased, the amount of La 2O 3 and La 2CrO 6 phases was gradually increased. The coating layer, which was prepared from a precursor solution of 0.8 M, was composed of LaCrO 3 and small amounts of (Mn,Cr)O 4 spinel. A relatively dense coating layer without pin-holes was obtained by heating the gel coating layer at 1073 K for 2 h. Microstructures and oxidation behavior of the La 2O 3-coated STS444 were investigated.

  18. Lanthanum-catalysed synthesis of microporous 3D graphene-like carbons in a zeolite template.

    PubMed

    Kim, Kyoungsoo; Lee, Taekyoung; Kwon, Yonghyun; Seo, Yongbeom; Song, Jongchan; Park, Jung Ki; Lee, Hyunsoo; Park, Jeong Young; Ihee, Hyotcherl; Cho, Sung June; Ryoo, Ryong

    2016-07-01

    Three-dimensional graphene architectures with periodic nanopores—reminiscent of zeolite frameworks—are of topical interest because of the possibility of combining the characteristics of graphene with a three-dimensional porous structure. Lately, the synthesis of such carbons has been approached by using zeolites as templates and small hydrocarbon molecules that can enter the narrow pore apertures. However, pyrolytic carbonization of the hydrocarbons (a necessary step in generating pure carbon) requires high temperatures and results in non-selective carbon deposition outside the pores. Here, we demonstrate that lanthanum ions embedded in zeolite pores can lower the temperature required for the carbonization of ethylene or acetylene. In this way, a graphene-like carbon structure can be selectively formed inside the zeolite template, without carbon being deposited at the external surfaces. X-ray diffraction data from zeolite single crystals after carbonization indicate that electron densities corresponding to carbon atoms are generated along the walls of the zeolite pores. After the zeolite template is removed, the carbon framework exhibits an electrical conductivity that is two orders of magnitude higher than that of amorphous mesoporous carbon. Lanthanum catalysis allows a carbon framework to form in zeolite pores with diameters of less than 1 nanometre; as such, microporous carbon nanostructures can be reproduced with various topologies corresponding to different zeolite pore sizes and shapes. We demonstrate carbon synthesis for large-pore zeolites (FAU, EMT and beta), a one-dimensional medium-pore zeolite (LTL), and even small-pore zeolites (MFI and LTA). The catalytic effect is a common feature of lanthanum, yttrium and calcium, which are all carbide-forming metal elements. We also show that the synthesis can be readily scaled up, which will be important for practical applications such as the production of lithium-ion batteries and zeolite-like catalyst

  19. Influence of lanthanum doping on the dielectric, ferroelectric and relaxor behaviour of barium bismuth titanate ceramics

    NASA Astrophysics Data System (ADS)

    Kumar, Sunil; Varma, K. B. R.

    2009-04-01

    Barium lanthanum bismuth titanate (Ba1-(3/2)xLaxBi4Ti4O15, x = 0-0.4) ceramics were fabricated using the powders synthesized via the solid-state reaction route. X-ray powder diffraction analysis confirmed the above compositions to be monophasic and belonged to the m = 4 member of the Aurivillius family of oxides. The effect of the partial presence of La3+ on Ba2+ sites on the microstructure, dielectric and relaxor behaviour of BaBi4Ti4O15 (BBT) ceramics was investigated. For the compositions pertaining to x <= 0.1, the dielectric constant at both room temperature and in the vicinity of the temperature of the dielectric maximum (Tm) of the parent phase (BBT) increased significantly with an increase in x while Tm remained almost constant. Tm shifted towards lower temperatures accompanied by a decrease in the magnitude of the dielectric maximum (ɛm) with an increase in the lanthanum content (0.1 < x <= 0.4). The dielectric relaxation was modelled using the Vogel-Fulcher relation and a decrease in the activation energy for frequency dispersion with increasing x was observed. The frequency dispersion of Tm was found to decrease with an increase in lanthanum doping, and for compositions corresponding to x >= 0.3, Tm was frequency independent. Well-developed P(polarization)-E(electric field) hysteresis loops were observed at 150 °C for all the samples and the remanent polarization (2Pr) was improved from 6.3 µC cm-2 for pure BBT to 13.4 µC cm-2 for Ba0.7La0.2Bi4Ti4O15 ceramics. Dc conductivities and associated activation energies were evaluated using impedance spectroscopy.

  20. Programmable diffractive optical element using a multichannel lanthanum-modified lead zirconate titanate phase modulator

    NASA Astrophysics Data System (ADS)

    Thomas, James A.; Fainman, Yeshaiahu

    1995-07-01

    We introduce a programmable diffractive optical element based on an electro-optic phased array implemented with a multichannel lanthanum-modified lead zirconate titanate phase modulator. The design and fabrication procedures are outlined, along with an experimental demonstration of the device. Experimental results from a 16-channel device operating with a 2 pi voltage of 300 V demonstrate selective beam steering. The programmable diffractive optical element allows for efficient, high-speed high-resolution random-access optical beam steering over a continuous scanning range.

  1. Deposition of Lanthanum Strontium Cobalt Ferrite (LSCF) Using Suspension Plasma Spraying for Oxygen Transport Membrane Applications

    NASA Astrophysics Data System (ADS)

    Fan, E. S. C.; Kesler, O.

    2015-08-01

    Suspension plasma spray deposition was utilized to fabricate dense lanthanum strontium cobalt ferrite oxygen separation membranes (OSMs) on porous metal substrates for mechanical support. The as-sprayed membranes had negligible and/or reversible material decomposition. At the longer stand-off distance (80 mm), smooth and dense membranes could be manufactured using a plasma with power below approximately 81 kW. Moreover, a membrane of 55 μm was observed to have very low gas leakage rates desirable for OSM applications. This thickness could potentially be decreased further to improve oxygen diffusion by using metal substrates with finer surface pores.

  2. The strong influence of iron additions on the lead-lanthanum-titanate ceramics

    NASA Astrophysics Data System (ADS)

    Omari, Lhaj el Hachemi; Sayouri, Salaheddine

    2013-11-01

    In the present work, phase transitions and electrical characteristics of iron and lanthanum substituted lead titanate are reported. Structural analysis of the prepared samples was carried out to confirm the formation of the compounds in the proper phase. The average grain size was estimated using Scherrer's equation. Dielectric properties of the samples have been studied as functions of temperature and frequency. Variations of the dielectric constant (ɛr) as function of temperature show a diffuse ferro-paraelectric phase transition. The diffusivity and the relaxation strength were estimated using the modified Uchino-law, and the relaxation time of these materials satisfies the Vogel-Fulcher equation.

  3. Temperature-Dependent Electrical and Micromechanical Properties of Lanthanum Titanate with Additions of Yttria

    NASA Technical Reports Server (NTRS)

    Goldsby, Jon C.

    2010-01-01

    Temperature-dependent elastic properties were determined by establishing continuous flexural vibrations in the material at its lowest resonance frequency of 31tHz. The imaginary part of the complex impedance plotted as a function of frequency and temperature reveals a thermally activated peak, which decreases in magnitude as the temperature increases. Additions of yttria do not degrade the electromechanical in particularly the elastic and anelastic properties of lanthanum titanate. Y2O3/La2Ti2O7 exhibits extremely low internal friction and hence may be more mechanical fatigue-resistant at low strains.

  4. Investigation of the elemental composition of lanthanum-cerium hexaboride crystals

    NASA Astrophysics Data System (ADS)

    Badalyan, Georgi; Kuzanyan, Armen; Petrosyan, Vahagn; Kuzanyan, Vazgen; Gulian, Armen

    2010-10-01

    Crystals of solid solutions of lanthanum-cerium hexaborides (La1-xCex)B6 possess unique thermoelectric properties in the temperature range of 0.3-9 K and they can be used in thermoelectric single-photon detectors as a sensor. One can observe a wide spread in thermoelectric measurement values reported in the literature, which is because of different qualities of studied crystals. The greatest influence on both the Seebeck coefficient and electrical resistivity of samples is exercised by the presence of uncontrolled impurities in crystals and the deviation from stoichiometry. In this work we have studied just the aforementioned parameters of the crystals obtained by three different methods.

  5. Temperature Dependent Electrical and Micromechanical Properties of Lanthanum Titanate with Additions of Yttria

    NASA Technical Reports Server (NTRS)

    Goldsby, Jon C.

    2003-01-01

    Lanthanum titanate (La2Ti2O7) a layered distorted perovskite (1) with space group Pna2(sub 1) has been shown to have potential as a high temperature piezoelectric (2). However this highly refractory oxide compound must be consolidated at relatively high temperatures approximately 1400 C. Commercial La2Ti207 powders were mechanically alloyed with additions of Y2O3 to lower the consolidation temperature by 300 C and to provide post processing mechanical stability. Temperature dependent electrical, elastic and anelastic behavior were selected as nondestructive means of evaluating the effects of yttria on the properties of this ferroceramic material.

  6. Bistable optical information storage using antiferroelectric-phase lead lanthanum zirconate titanate ceramics

    SciTech Connect

    Land, C.E.

    1988-11-01

    A recently discovered photostorage effect in antiferroelectric-phase (AFE-phase) lead lanthanum zirconate titanate (PLZT) compositions appears to be particularly applicable to binary optical information storage. The basis for bistable optical information storage is that exposure to near-UV or visible light shifts the electric field threshold of the phase transition between the field-induced ferroelectric (FE) phase and the stable AFE phase in the direction of the initial AFE /yields/ FE phase transition. Properties of this photoactivated shift of the FE /yields/ AFE phase transition, including preliminary photosensitivity measurements and photostorage mechanisms, are presented. Photosensitivity enhancement by ion implantation is also discussed.

  7. Photosensitivity enhancement by H- and He-ion implantation in lead lanthanum zirconate titanate ceramics

    SciTech Connect

    Land, C.E.; Peercy, P.S.

    1980-07-01

    H- and He-ion implantation has been used to increase the photoferroelectric image storage sensitivity of lead lanthanum zirconium titanate ceramics by factors of approx.10 and approx.30, respectively. The increased photosensitivity can be attributed primarily to implantation-produced disorder, which increases the efficiency of carrier photoexcitation and trapping and reduces the exposure energy required to establish nonvolatile space-charge fields. Implantation-induced disorder may also contribute to a substantial increase in photoconductivity in the ion-damaged near-surface region.

  8. Performance of planar single cell lanthanum gallate based solid oxide fuel cells

    NASA Astrophysics Data System (ADS)

    Maffei, N.; Kuriakose, A. K.

    A novel synthesis of high purity, single phase strontium-magnesium doped lanthanum gallate through a nitrate route is described. The prepared powder is formed into planar monolithic elements by uniaxial pressing followed by isostatic pressing and sintering. XRD analysis of the sintered elements reveal no detectable secondary phases. The performance of the electrolyte in solid oxide fuel cells (SOFC) with three different anode/cathode combinations tested at 700°C with respect to the J- V and power density is reported. The data show that the characteristics of this SOFC are strongly dependent on the particular anode/cathode system chosen.

  9. Precipitation of copper and chromium impurities in lanthanum magnesium aluminate crystals during thermochemical reduction

    SciTech Connect

    Ballesteros, C. ); Gonzalez, R. ); Chen, Y. ); Kokta, M.R. )

    1993-02-01

    Thermochemical reduction at high temperatures has been performed on chromium-doped lanthanum magnesium aluminate crystals. Analytical transmission-electron-microscopy and optical-absorption techniques were used to characterize the crystals. Copper impurities inherently present in the crystals began to aggregate and form Cu-rich particles at 1500 K near the surface region. Below 1870 K there was no evidence of chromium precipitates being formed. However, Cr-rich particles were formed at 2020 K. The distribution of the precipitates was very inhomogeneous and the precipitates were also concentrated near the surface region.

  10. High-current density, high-brightness electron beams from large-area lanthanum hexaboride cathodes

    NASA Astrophysics Data System (ADS)

    Loschialpo, P.; Kapetanakos, C. A.

    1987-12-01

    Large (approx. 5 cm) diameter lanthanum hexaboride (LaB6) cathodes operated at 10 kV have produced 1 to 5 micro electron pulses with current density between 10 and 20 A/sq cm. Normalized beam brightness, has been consistently measured. To obtain this high current density, the LaB6 cathodes have been heated to temperatures between approximately 1600 to 1800 C. Very uniform temperature profiles are obtained by applying a carefully tailored electron bombardment heating power distribution. These measurements have been made between pressure .000001 to .00001 Torr, i.e., under much less demanding vacuum conditions than that required by conventional dispenser type cathodes.

  11. Bulk and surface structure characterization of nanoscopic silver doped lanthanum chromites

    NASA Astrophysics Data System (ADS)

    Desai, P. A.; Joshi, P. N.; Patil, K. R.; Athawale, Anjali A.

    2013-01-01

    Crystalline state of lanthanum chromites with silver as a dopant has been studied by X-ray diffraction and transmission electron microscopy reveals microscopic properties of grain boundaries. X-ray photoelectron spectroscopy has been used to analyze surface states with atomic ratio of La, Cr, O and Ag as a dopant. LaCrO3 shows mixed valence states of chromium while the silver doped samples exhibit differences in chromium concentration with the oxidation of Cr3+ to Cr6+ in presence of chromium nitrate as a precursor salt. Trivalent stable state of chromium is observed for samples synthesized by chromic acetate as a precursor salt.

  12. High-current lanthanum-hexaboride electron emitter for a quasi-stationary arc plasma generator

    SciTech Connect

    Davydenko, V. I. Ivanov, A. A. Shul’zhenko, G. I.

    2015-11-15

    A high-current electron emitter on the basis of lanthanum hexaboride is developed for quasi-stationary arc plasma generators of ion sources. The emitter consists of a set of LaB{sub 6} washers interleaved with washers made of thermally extended graphite. The emitter is heated by the current flowing through the graphite washers. The thermal regime of emitter operation during plasma generation is considered. The emitter has been successfully used in the ion sources of the diagnostic injectors of fast hydrogen atomic beams.

  13. Fabrication of Lanthanum Telluride 14-1-11 Zintl High-Temperature Thermoelectric Couple

    NASA Technical Reports Server (NTRS)

    Ravi, Vilupanur A.; Li, Billy Chun-Yip; Fleurial, Pierre; Star, Kurt

    2010-01-01

    The development of more efficient thermoelectric couple technology capable of operating with high-grade heat sources up to 1,275 K is key to improving the performance of radioisotope thermoelectric generators. Lanthanum telluride La3-xTe4 and 14-1-11 Zintls (Yb14MnSb11) have been identified as very promising materials. The fabrication of advanced high-temperature thermoelectric couples requires the joining of several dissimilar materials, typically including a number of diffusion bonding and brazing steps, to achieve a device capable of operating at elevated temperatures across a large temperature differential (up to 900 K). A thermoelectric couple typically comprises a heat collector/ exchanger, metallic interconnects on both hot and cold sides, n-type and ptype conductivity thermoelectric elements, and cold-side hardware to connect to the cold-side heat rejection and provide electrical connections. Differences in the physical, mechanical, and chemical properties of the materials that make up the thermoelectric couple, especially differences in the coefficients of thermal expansion (CTE), result in undesirable interfacial stresses that can lead to mechanical failure of the device. The problem is further complicated by the fact that the thermoelectric materials under consideration have large CTE values, are brittle, and cracks can propagate through them with minimal resistance. The inherent challenge of bonding brittle, high-thermal-expansion thermoelectric materials to a hot shoe material that is thick enough to carry the requisite electrical current was overcome. A critical advantage over prior art is that this device was constructed using all diffusion bonds and a minimum number of assembly steps. The fabrication process and the materials used are described in the following steps: (1) Applying a thin refractory metal foil to both sides of lanthanum telluride. To fabricate the n-type leg of the advanced thermoelectric couple, the pre-synthesized lanthanum

  14. Thermodynamics of neptunium(V) fluoride and sulfate at elevatedtemperatures

    SciTech Connect

    Rao, Linfeng; Tian, Guoxin; Xia, Yuanxian; Friese, Judah I.

    2006-10-31

    Complexation of neptunium(V) with fluoride and sulfate at elevated temperatures was studied by microcalorimetry. Thermodynamic parameters, including the equilibrium constants and enthalpy of protonation of fluoride and sulfate, and the enthalpy of complexation between Np(V) and fluoride and sulfate at 25 - 70 C were determined. Results show that the complexation of Np(V) with fluoride and sulfate is endothermic and that the complexation is enhanced by the increase in temperature - a three-fold increase in the stability constants of NpO{sub 2}F(aq) and NpO{sub 2}SO{sub 4}{sup -} as the temperature is increased from 25 to 70 C.

  15. Pharmacokinetics in the oral cavity: fluoride and other active ingredients.

    PubMed

    Duckworth, Ralph M

    2013-01-01

    Modern commercial toothpastes contain therapeutic ingredients to combat various oral conditions, for example, caries, gingivitis, calculus and tooth stain. The efficient delivery and retention of such ingredients in the mouth is essential for good performance. The aim of this chapter is to review the literature on the oral pharmacokinetics of, primarily, fluoride but also other active ingredients, mainly anti-plaque agents. Elevated levels of fluoride have been found in saliva, plaque and the oral soft tissues after use of fluoridated toothpaste, which persist at potentially active concentrations for hours. Both experiment and mathematical modelling suggest that the soft tissues are the main oral reservoir for fluoride. Qualitatively similar observations have been made for anti-plaque agents such as triclosan and metal cations, though their oral substantivity is generally greater. Scope for improved retention and subsequent efficacy exists. PMID:23817065

  16. 40 CFR 60.222 - Standard for fluorides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate Plants § 60.222 Standard for fluorides. (a) On and after the date on...

  17. Complexation of Plutonium (IV) with Fluoride at Variable Temperatures

    SciTech Connect

    Xia, Yuanxian; Rao, Linfeng; Friese, Judah I.; Moore, Dean A.; Bachelor, Paula P.

    2010-02-02

    The complexation of Pu(IV) with fluoride at elevated temperatures was studied by solvent extraction technique. A solution of NaBrO3 was used as holding oxidant to maintain the oxidation state of plutonium throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of fluoride were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-F- complexes, dominant in the aqueous phase under the experimental conditions, were calculated from the effect of fluoride ions on the distribution ratio. The thermodynamic parameters, including enthalpy and entropy of complexation between Pu(IV) and fluoride at 25 degrees C - 55 degrees C were calculated from the stability constants at different temperatures by using the Van’t Hoff equation.

  18. Fluorination of amorphous thin-film materials with xenon fluoride

    DOEpatents

    Weil, R.B.

    1987-05-01

    A method is disclosed for producing fluorine-containing amorphous semiconductor material, preferably comprising amorphous silicon. The method includes depositing amorphous thin-film material onto a substrate while introducing xenon fluoride during the film deposition process.

  19. Fluorination of amorphous thin-film materials with xenon fluoride

    DOEpatents

    Weil, Raoul B.

    1988-01-01

    A method is disclosed for producing fluorine-containing amorphous semiconductor material, preferably comprising amorphous silicon. The method includes depositing amorphous thin-film material onto a substrate while introducing xenon fluoride during the film deposition process.

  20. Graphite fluoride as a solid lubricant in a polyimide binder

    NASA Technical Reports Server (NTRS)

    Fusaro, R. L.; Sliney, H. E.

    1972-01-01

    Polyimide resin (PI) was shown to be a suitable binder material for the solid lubricant graphite fluoride, (CF(1.1))n. Comparisons were made to similar tests using PI-bonded MOS2 films, graphite fluoride rubbed films, and MOS2 rubbed films. The results showed that, at any one specific temperature between 25 and 400 C, the wear life of PI-bonded graphite fluoride films exceeded those of the other three films by at least a factor of 2 and by as much as a factor of 60. Minimum friction coefficients for the PI-bonded films were 0.08 for graphite fluoride and 0.04 for MOS2. The rider wear rates for the two PI-bonded films at 25 C were nearly equal.

  1. Phase A design study of microgravity fluoride fiber puller

    NASA Technical Reports Server (NTRS)

    Workman, Gary L.; Smith, Guy A.; Kosten, Susan

    1994-01-01

    Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

  2. 49 CFR 179.102-4 - Vinyl fluoride, stabilized.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., stabilized. Each tank used to transport vinyl fluoride, stabilized, must comply with the following special... alloy containing any of these metals may not be used in the tank construction, or in fittings in...

  3. Fluoride ion recognition by chelating and cationic boranes.

    PubMed

    Hudnall, Todd W; Chiu, Ching-Wen; Gabbaï, François P

    2009-02-17

    Because of the ubiquity of fluoride ions and their potential toxicity at high doses, researchers would like to design receptors that selectively detect this anion. Fluoride is found in drinking water, toothpaste, and osteoporosis drugs. In addition, fluoride ions also can be detected as an indicator of uranium enrichment (via hydrolysis of UF(6)) or of the chemical warfare agent sarin, which releases the ion upon hydrolysis. However, because of its high hydration enthalpy, the fluoride anion is one of the most challenging targets for anion recognition. Among the various recognition strategies that are available, researchers have focused a great deal of attention on Lewis acidic boron compounds. These molecules typically interact with fluoride anions to form the corresponding fluoroborate species. In the case of simple triarylboranes, the fluoroborates are formed in organic solvents but not in water. To overcome this limitation, this Account examines various methods we have pursued to increase the fluoride-binding properties of boron-based receptors. We first considered the use of bifunctional boranes, which chelate the fluoride anion, such as 1,8-diborylnaphthalenes or heteronuclear 1-boryl-8-mercurio-naphthalenes. In these molecules, the neighboring Lewis acidic atoms can cooperatively interact with the anionic guest. Although the fluoride binding constants of the bifunctional compounds exceed those of neutral monofunctional boranes by several orders of magnitude, the incompatibility of these systems with aqueous media limits their utility. More recently, we have examined simple triarylboranes whose ligands are decorated by cationic ammonium or phosphonium groups. These cationic groups increase the electrophilic character of these boranes, and unlike their neutral analogs, they are able to complex fluoride in aqueous media. We have also considered cationic boranes, which form chelate complexes with fluoride anions. Our work demonstrates that Coulombic and chelate

  4. Crystallization, Optical and Chemical Properties of Fluoride Glasses

    NASA Technical Reports Server (NTRS)

    Doremus, R. H.

    1985-01-01

    Fluoride glasses have great promise as infrared optical components, especially fibers, because they are transparent to 8 micrometers and higher. In order to optimize properties, different glass compositions are needed. Some are hard to form in a container, and may possibly be formable in a containerless furnace. Understanding of crystallization with and without a container could lead to glasses with optimum properties. Chemical durability (attack by water) can limit or extend the applicability of fluoride glasses. Progress to date is given.

  5. Occurrence of fluoride in ground waters of Saudi Arabia

    NASA Astrophysics Data System (ADS)

    Alabdulaaly, Abdulrahman I.; Al-Zarah, Abdullah I.; Khan, Mujahid A.

    2013-09-01

    The presence of elevated levels of fluoride in groundwater is considered a global problem. Fluoride in water derives mainly from dissolution of natural minerals in the rocks and soils with which water interacts. The most common fluorine-bearing minerals are fluorite, apatite and micas. Anthropogenic sources of fluoride include agricultural fertilizers and combustion of coal. In the present research, a survey of wells ( n = 1,060) was undertaken in all the 13 regions of the Kingdom of Saudi Arabia to assess the contained fluoride (F) levels. The results indicated variation in fluoride levels from 0.10 to 5.4 mg/L as F throughout the kingdom. The average fluoride levels in milligrams per liter as F were as follows in descending order: 1.80 (Hadwood Shamalyah), 1.37 (Hail), 1.33 (Eastern Province), 1.16 (Al Jouf), 1.11 (Qassim), 1.01 (Riyadh), 0.90 (Madina Al Munnawara), 0.81 (Tabouk), 0.74 (Makkah Al- Mukaramma), 0.73 (Jizan), 0.66 (Asir), 0.64 (Najran), and 0.60 (Al Baha). The results indicated that fluoride levels exceeded the USEPA maximum contaminant limits for drinking water (4 mg/L) in several wells ( n = 7) in different regions of the kingdom and that 13.96 % of the wells exceeded the World Health Organization recommended levels (1.5 mg/L). The results were also compared with the secondary USEPA contaminant standards of 2.0 mg/L for fluorides.

  6. Quality of our groundwater resources: arsenic and fluoride

    USGS Publications Warehouse

    Nordstrom, D. Kirk

    2011-01-01

    Groundwater often contains arsenic or fluoride concentrations too high for drinking or cooking. These constituents, often naturally occurring, are not easy to remove. The right combination of natural or manmade conditions can lead to elevated arsenic or fluoride which includes continental source rocks, high alkalinity and pH, reducing conditions for arsenic, high phosphate, high temperature and high silica. Agencies responsible for safe drinking water should be aware of these conditions, be prepared to monitor, and treat if necessary.

  7. Volatile fluoride process for separating plutonium from other materials

    DOEpatents

    Spedding, F. H.; Newton, A. S.

    1959-04-14

    The separation of plutonium from uranium and/or fission products by formation of the higher fluorides off uranium and/or plutonium is described. Neutronirradiated uranium metal is first converted to the hydride. This hydrided product is then treated with fluorine at about 315 deg C to form and volatilize UF/sub 6/ leaving plutonium behind. Thc plutonium may then be separated by reacting the residue with fluorine at about 5004DEC and collecting the volatile plutonium fluoride thus formed.

  8. VOLATILE FLUORIDE PROCESS FOR SEPARATING PLUTONIUM FROM OTHER MATERIALS

    DOEpatents

    Spedding, F.H.; Newton, A.S.

    1959-04-14

    The separation of plutonium from uranium and/or tission products by formation of the higher fluorides of uranium and/or plutonium is discussed. Neutronirradiated uranium metal is first convcrted to the hydride. This hydrided product is then treatced with fluorine at about 315 deg C to form and volatilize UF/sup 6/ leaving plutonium behind. The plutonium may then be separated by reacting the residue with fluorine at about 500 deg C and collecting the volatile plutonium fluoride thus formed.

  9. Observation of color center peaks in calcium fluoride.

    PubMed

    Aoki, T; Garvie, L A J; Rez, P

    2015-06-01

    Alkali halides such as calcium fluoride all have color center defects that absorb light in the visible region. Using a moncochromator equipped, aberration corrected, scanning transmission electron microscope (STEM) we recorded spectra showing the time evolution of the generation of F and H centers in calcium fluoride. The final stage of electron beam irradiation is the formation of metallic calcium nanoparticles. High resolution low loss spectra for the Vacuum Ultraviolet region were also recorded. PMID:25725200

  10. Fluoride concentrations in a crystalline bedrock aquifer Marathon County, Wisconsin

    NASA Astrophysics Data System (ADS)

    Ozsvath, David L.

    2006-05-01

    Water samples from 2,789 private water-supply wells in Marathon County, Wisconsin reveal that fluoride concentrations in the crystalline bedrock range from <0.01 to 7.60 mg/L, with 0.6% of the values exceeding the Environmental Protection Agency’s (EPA’s) maximum contaminant level of 4 mg/L, and 8.6% exceeding the EPA’s secondary maximum contaminant level of 2.0 mg/L. Roughly a quarter of the wells contain dissolve fluoride within the range considered optimal for human health (between 0.5 and 1.5 mg/L), whereas 63.3% fall below 0.5 mg/L. Consistent with studies conducted in other regions, felsic rocks have significantly higher fluoride concentrations than mafic and metasedimentary rocks. Syenites yield the most fluoriferous groundwaters, but the highest median concentration occurs in a sodium-plagioclase granite. A relationship between plagioclase composition and fluoride concentrations suggests that dissolved fluoride levels are controlled by fluorite solubility and that higher fluoride concentrations are found in soft, sodium-rich groundwater.

  11. Monitoring of fluoride in water samples using a smartphone.

    PubMed

    Levin, Saurabh; Krishnan, Sunderrajan; Rajkumar, Samuel; Halery, Nischal; Balkunde, Pradeep

    2016-05-01

    In several parts of India, groundwater is the only reliable, year round source for drinking water. Prevention of fluorosis, a chronic disease resulting from excess intake of fluoride, requires the screening of all groundwater sources for fluoride in endemic areas. In this paper, the authors present a field deployable colorimetric analyzer based on an inexpensive smartphone embedded with digital camera for taking photograph of the colored solution as well as an easy-fit, and compact sample chamber (Akvo Caddisfly). Phones marketed by different smartphone makers were used. Commercially available zirconium xylenol orange reagent was used for determining fluoride concentration. A software program was developed to use with the phone for recording and analyzing the RGB color of the picture. Linear range for fluoride estimation was 0-2mgl(-1). Around 200 samples, which consisted of laboratory prepared as well as field samples collected from different locations in Karnataka, India, were tested with Akvo Caddisfly. The results showed a significant positive correlation between Ion Selective Electrode (ISE) method and Akvo Caddisfly (Phones A, B and C), with correlation coefficient ranging between 0.9952 and 1.000. In addition, there was no significant difference in the mean fluoride content values between ISE and Phone B and C except for Phone A. Thus the smartphone method is economical and suited for groundwater fluoride analysis in the field. PMID:26874766

  12. Response of grapevines to fluoride under field conditions

    SciTech Connect

    Murray, F.

    1983-07-01

    Grapevines (Vitis vinifera L. cv. Shiraz) were fumigated in open-top chambers with hydrogen fluoride for 64 days at mean atmospheric fluoride concentrations of 0.17 or 0.28 ..mu..gHFm/sup -3/. Other grapevines grown under ambient conditions in the vineyard or maintained in control chambers were exposed to 0.13 or 0.05 ..mu..gHFm/sup -3/, respectively. Leaves of grapevines exposed to 0.28, 0.17, 0.13, or 0.05 ..mu..gHFm/sup -3/ accumulated up to 85, 55, 20, or 11 ..mu..gFg/sup -1/, respectively. Foliar necrosis was observed on plants exposed to 0.28 ..mu..gHFm/sup -3/, but no injury symptoms were observed at 0.17 ..mu..gHFm/sup -3/ or in control plants. Grapevines growing under ambient conditions had significantly greater mean bunch weight, peduncle weight, number of grapes per bunch, and leaf protein levels than the fumigated treatments. However, these differences may be associated with a chamber effect rather than with an effect of fluoride on grapevines. No significant differences were found between treatments for grape potential alcohol content, fruit acids, number of bunches or grapes per vine, fresh weight of grapes, or leaf chlorophyll content, despite foliar fluoride concentrations in the highest fluoride fumigation level reaching 85 ..mu..gFg/sup -1/. No evidence was found of significant fluoride accumulation in berries or canes. 26 references, 4 tables.

  13. An Overview of Liquid Fluoride Salt Heat Transport Technology

    SciTech Connect

    Cetiner, Mustafa Sacit; Holcomb, David Eugene

    2010-01-01

    Liquid fluoride salts are a leading candidate heat transport medium for high-temperature applications. This report provides an overview of the current status of liquid salt heat transport technology. The report includes a high-level, parametric evaluation of liquid fluoride salt heat transport loop performance to allow intercomparisons between heat-transport fluid options as well as providing an overview of the properties and requirements for a representative loop. Much of the information presented here derives from the earlier molten salt reactor program and a significant advantage of fluoride salts, as high temperature heat transport media is their consequent relative technological maturity. The report also includes a compilation of relevant thermophysical properties of useful heat transport fluoride salts. Fluoride salts are both thermally stable and with proper chemistry control can be relatively chemically inert. Fluoride salts can, however, be highly corrosive depending on the container materials selected, the salt chemistry, and the operating procedures used. The report also provides an overview of the state-of-the-art in reduction-oxidation chemistry control methodologies employed to minimize salt corrosion as well as providing a general discussion of heat transfer loop operational issues such as start-up procedures and freeze-up vulnerability.

  14. The absorption and excretion of fluoride and arsenic in humans.

    PubMed

    Zheng, Yujian; Wu, Jiyao; Ng, Jack C; Wang, Guoquan; Lian, Wu

    2002-07-01

    The absorption and excretion of fluoride and arsenic were measured in a group of healthy volunteers given drinking water with naturally high concentration of fluoride (F 2.3 mg/l)(,) or high concentration of arsenic (As 0.15 mg/l), or high concentrations of both fluoride and arsenic (F 2.25 mg/l, As 0.23 mg/l and F 4.05 mg/l, As 0.58 mg/l), respectively. The results indicated that, for arsenic, the absorption rate, the proportion of urinary excretion and the biological-half-life did not show statistically significant differences between drinking water containing high arsenic alone and drinking water containing different levels of high arsenic and fluoride. Excretion and retention of arsenic were positively correlated to the total arsenic intake. Similar results were observed for fluoride. This suggests that there are different metabolic processes for arsenic and fluoride in respect to absorption and excretion; and no joint action can be attributed by these two elements. PMID:12076512

  15. Heavy metal fluoride glass fibers and their applications

    NASA Astrophysics Data System (ADS)

    Saad, Mohammed

    2011-12-01

    The availability of high quality optical fibers with transmission window, larger than that of silica fiber, extends the use of optical fibers and open new application fields. There is increasing demand of optical fiber with transmission over 2 microns, where silica is opaque, for applications as diverse as sensing, fiber lasers and amplifiers, defense (IRCM), spectroscopy... No materials can fulfill all applications needs. Engineers have to make some compromise when choosing the right materials for the right application. Heavy metal fluoride glass is one of these materials. The glass, under bulk form, has a wide transmission window from 0.3 up to 8 microns, without any absorption peaks. Heavy metal fluoride glass fibers are drawn using the preform technique, the same technique used for silica fiber. This technique has proven to allow good control of fiber dimensions and geometry. Fluoride glass fibers with different exotics shapes have already been obtained, such as D-shaped, square, of centered fiber, multi cladding fibers and microstructured fibers.... As far as active fibers are concerned, heavy metal fluoride glasses have low phonon energy and can contain high concentration of active ions, rare-earth elements. Therefore, new laser lines have been already demonstrated using fluoride glass fibers. Fiber lasers with output power exceeding 10 w have been obtained by different groups. This paper will present the latest development of fluoride glass fiber technology, including fibers optical and mechanical properties, fiber lasers and power handling.

  16. Fluoride, aluminum, and phosphate kinetics in cryolite workers.

    PubMed

    Grandjean, P; Hørder, M; Thomassen, Y

    1990-01-01

    Exposure to cryolite (Na3AlF6) dust may result in skeletal fluorosis. Eight male workers at a cryolite concentrator participated in a 4-day study after 5 days of vacation. Dust exposures were 0.16 to 21.2 mg/m3. Urine was collected before work began and during two 4-hour periods. Preshift urine fluoride concentrations increased during the week. Fluoride concentrations in postshift urine and serum both correlated with the dust exposures. Serum fluoride concentrations decreased with a half-life of 3.3 to 6.9 hours after work. Fluoride clearance was 40.5 to 76.5 mL/min at urinary flow rates of 0.89 to 2.21 mL/min. Serum aluminum concentrations varied without relation to the exposure, but the urinary aluminum excretion correlated with the fluoride levels. Preshift serum-phosphate concentrations increased significantly during the week, possibly indicating changes in mineral metabolism. For monitoring of individual uptake of cryolite dust, serum fluoride measurements are most useful. PMID:2324845

  17. Mechanistic understanding of enamel mineralization under fluoride regime.

    PubMed

    Aoba, T; Taya, Y; Sato, A; Shimada, T; Mura-Galelli, M J

    1995-01-01

    In order to learn more about how the microenvironment for enamel mineralization is modified by fluoride at low concentrations (0 through 1 ppm) and how excess fluoride retards the degradation and removal of amelogenins, we studied precipitation reactions in an in vitro model utilizing a dialysis chamber. The results showed that, with the limited supply of Ca ions through the ultrafiltration membrane, the solution composition surrounding the seed crystals showed a proximity to the steady-state condition after 12-24 h equilibration. Major findings were that (a) fluoride overcame partially the inhibition of precipitation and growth reactions by enamel proteins and (b), with this accelerating effect of fluoride, the steady-state Ca concentrations in the media surrounding the seed crystals decreased substantially as a function of fluoride concentration. The overall results support the concept that the presence of fluoride in the mineralizing milieu can modify markedly the steady-state concentrations of mineral lattice ions, particularly decreasing free Ca2+ concentrations, which in turn may modulate protease activities in situ. PMID:7554946

  18. Tablet fluoridation influences the calcification of primary tooth pulp.

    PubMed

    Holtgrave, E A; Hopfenmüller, W; Ammar, S

    2001-01-01

    This study was conducted to determine the influence of long-term tablet fluoridation on primary pulp calcification by light microscopy. Twenty-four caries-free primary molars (after continuous postpartally initiated 1- to 10-year tablet fluoridation) were compared to 17 primary molars of children without fluoride prophylaxis. Pulp calcification in children with tablet fluoridation was significantly more frequent and more pronounced than in untreated children (p = 0.001). Besides the known pulp stones, the prophylaxis group evidenced a special form of calcification consisting of fibrodentin-like hard tissue not observed in the untreated children. These hard tissue bodies developed "intramurally" on the pulp floor and the inside of the dental roots with an irregular extramural spread into the coronal and radicular pulp by displacement and fibrotization of the pulp tissue. Moreover, some of the teeth had more or less extensive areas of interglobular dentin. The affected teeth were ankylosed in the area of the bi- and trifurcation and on the inside of the roots and were thus infra-occluded. Although the duration of tablet fluoridation has no statistically significant influence on pulp calcification, there is a correlation between extensive pulp calcification, postnatally initiated fluoride prophylaxis and the infraocclusion of primary molars. PMID:11227204

  19. Phosphate reduction in a hydroxyapatite fluoride removal system

    NASA Astrophysics Data System (ADS)

    Egner, A.

    2012-12-01

    Fluorosis is a widespread disease that occurs as a result of excess fluoride consumption and can cause severe tooth and bone deformations. To combat fluorosis, several previous studies have examined the potential to replace traditional bone char filters with synthetic hydroxyapatite. Calcite particles with a synthetic hydroxyapatite coating have been shown to effectively removed fluoride, yet the low-cost method for forming these particles leaves high amounts of phosphate both in synthesis waste-water and in filter effluent. High phosphate in filter effluent is problematic because consumption of extremely high phosphate can leach calcium from bones, further exacerbating the fluoride effect. This study examines ways of reducing and reusing waste. In particular, a method of fluoride removal is explored in which fluorapatite coatings may be formed directly. In preliminary studies, batches of 4.1g of Florida limestone (<710 μm) were equilibrated with 100 mL of 10ppm fluoride. In a control batch containing lime but no added phosphate, 14% treatment was achieved, but with added phosphate, 100% treatment was achieved in all batches. Batches with lower levels of phosphate took longer to reach 100% treatment, ranging from less than 24 hours in the highest phosphate batches to approximately 42 hours in the lowest batches. The lower levels tested were well within reasonable levels for drinking water and reached 0ppm fluoride in 42 hours or less.

  20. The fluoride content of antlers as an indicator of fluoride exposure in red deer (Cervus elaphus): A historical biomonitoring study.

    PubMed

    Kierdorf, U; Kierdorf, H

    2000-01-01

    Bone fluoride concentrations were analyzed in 141 red deer antlers grown between the 17th/early 18th century and 1997, that originated from four study areas (Arnsberg, Bad Berleburg, Dämmerwald, Schmidtheim) in the federal state of North Rhine-Westphalia, Germany. Fluoride concentrations in the specimens ranged between 27.7 and 1, 392.1 mg F(-)/kg ash and varied significantly both between samples collected during different time-spans in the same area and between samples taken from different study areas over the same period. For antlers (n = 8) collected prior to 1860 in the study areas Arnsberg and Schmidtheim, values between 27.7 and 78.7 mg F(-)/kg ash were recorded. It is assumed that antler fluoride contents in this range are quite close to baseline levels for these regions, i.e., represent concentrations largely unaffected or only slightly influenced by fluoride from anthropogenic sources. With the onset and expansion of large-scale industrial activities, bone fluoride concentrations in the antler samples markedly increased over these baseline values, indicating fluoride deposition from industrial emissions into the red deer habitats. In the later 1980s and the 1990s, a pronounced decline in antler fluoride content was observed, which is attributed to the reduction of industrial fluoride discharges due to effective emission control programs. However, even the lowest fluoride values recorded for antlers grown in the 1990s (study area Schmidtheim, n = 10, range 158.5-367.3 mg F(-)/kg ash) clearly exceeded the concentrations found in the antlers collected prior to 1860, thereby indicating an additional fluoride burden from anthropogenic sources on the recent populations. The present study has corroborated the view that antlers are good indicators of fluoride exposure in deer. The facts that they grow during a seasonally fixed time-span and thus constitute relatively well "naturally standardized" samples and are often kept over long periods of time make antlers