Science.gov

Sample records for lateral border recycling

  1. Endothelial Src kinase regulates membrane recycling from the lateral border recycling compartment during leukocyte transendothelial migration.

    PubMed

    Dasgupta, Bidisha; Muller, William A

    2008-12-01

    When leukocytes cross endothelial cells during the inflammatory response, membrane from the recently described lateral border recycling compartment (LBRC) is selectively targeted around diapedesing leukocytes. This "targeted recycling" is critical for leukocyte transendothelial migration. Blocking homophilic PECAM interactions between leukocytes and endothelial cells blocks targeted recycling from the LBRC and blocks diapedesis. However, the cellular signaling pathways that trigger targeted recycling are not known. We show that targeted recycling from the LBRC is dependent on Src kinase. The selective Src kinase inhibitor PP2 blocked targeted recycling and blocked diapedesis by over 70%. However, Src kinase inhibition did not affect the structure or normal constitutive recycling of membrane from the LBRC in the absence of leukocytes. PECAM, a Src kinase substrate, traffics between the LBRC and the endothelial surface at the cell border. However, virtually all of the PECAM in the cell that was phosphorylated on tyrosine residues was found in the LBRC. These findings demonstrate that Src kinase activity is critical for the targeted recycling of membrane from the LBRC to the site of transendothelial migration and that the PECAM in the LBRC is qualitatively different from the PECAM on the surface of endothelial cells. PMID:18991269

  2. Targeted Recycling of the Lateral Border Recycling Compartment Precedes Adherens Junction Dissociation during Transendothelial Migration.

    PubMed

    Gonzalez, Annette M; Cyrus, Bita F; Muller, William A

    2016-05-01

    Leukocyte transendothelial migration (TEM) requires two major events: local dissociation of adherens junctions manifested as gaps in vascular endothelial (VE)-cadherin staining at the site of TEM and targeted trafficking of the lateral border recycling compartment (LBRC) to the site of TEM. However, the association between LBRC recycling and VE-cadherin gaps remains unknown. We found that when targeting of the LBRC is selectively inhibited using established methods, such as a function blocking anti-platelet endothelial cell adhesion molecule 1 antibody, depolymerizing microtubules, or microinjection of an antibody that inhibits kinesin, VE-cadherin gaps do not form around the blocked leukocyte. This is the first time that the LBRC has been implicated in this process. We obtained similar results for neutrophils and monocytes and in studies using live cell imaging microscopy conducted under fluid shear conditions. Depolymerizing microtubules did not affect the ability of leukocytes to induce tyrosine phosphorylation of VE-cadherin. A VE-cadherin double mutant (Y658F, Y731F) expressed in endothelial cells acted as a dominant negative and inhibited VE-cadherin gap formation and TEM, yet targeting of the LBRC still occurred. These data suggest that targeting of the LBRC to the site of TEM precedes VE-cadherin clearance. Recruitment of the LBRC may play a role in clearing VE-cadherin from the site of TEM. PMID:26968345

  3. 38 CFR 3.17 - Disability and death pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... pension; Mexican border period and later war periods. 3.17 Section 3.17 Pensions, Bonuses, and Veterans... Compensation General § 3.17 Disability and death pension; Mexican border period and later war periods. In... service which began before and extended into the Mexican border period or ended during World War I,...

  4. 38 CFR 3.17 - Disability and death pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... pension; Mexican border period and later war periods. 3.17 Section 3.17 Pensions, Bonuses, and Veterans... Compensation General § 3.17 Disability and death pension; Mexican border period and later war periods. In... service which began before and extended into the Mexican border period or ended during World War I,...

  5. 38 CFR 3.17 - Disability and death pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... pension; Mexican border period and later war periods. 3.17 Section 3.17 Pensions, Bonuses, and Veterans... Compensation General § 3.17 Disability and death pension; Mexican border period and later war periods. In... service which began before and extended into the Mexican border period or ended during World War I,...

  6. 38 CFR 3.17 - Disability and death pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... pension; Mexican border period and later war periods. 3.17 Section 3.17 Pensions, Bonuses, and Veterans... Compensation General § 3.17 Disability and death pension; Mexican border period and later war periods. In... service which began before and extended into the Mexican border period or ended during World War I,...

  7. 38 CFR 3.252 - Annual income; pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Annual income; pension; Mexican border period and later war periods. 3.252 Section 3.252 Pensions, Bonuses, and Veterans' Relief... Dependency, Income and Estate § 3.252 Annual income; pension; Mexican border period and later war periods....

  8. 38 CFR 3.252 - Annual income; pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Annual income; pension; Mexican border period and later war periods. 3.252 Section 3.252 Pensions, Bonuses, and Veterans' Relief... Dependency, Income and Estate § 3.252 Annual income; pension; Mexican border period and later war periods....

  9. 38 CFR 3.252 - Annual income; pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Annual income; pension; Mexican border period and later war periods. 3.252 Section 3.252 Pensions, Bonuses, and Veterans' Relief... Dependency, Income and Estate § 3.252 Annual income; pension; Mexican border period and later war periods....

  10. 38 CFR 3.252 - Annual income; pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Annual income; pension; Mexican border period and later war periods. 3.252 Section 3.252 Pensions, Bonuses, and Veterans' Relief... Dependency, Income and Estate § 3.252 Annual income; pension; Mexican border period and later war periods....

  11. 38 CFR 3.17 - Disability and death pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Disability and death pension; Mexican border period and later war periods. 3.17 Section 3.17 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and...

  12. 38 CFR 3.252 - Annual income; pension; Mexican border period and later war periods.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Annual income; pension; Mexican border period and later war periods. 3.252 Section 3.252 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity...

  13. aPKC Phosphorylation of Bazooka Defines the Apical/Lateral Border in Drosophila Epithelial Cells

    PubMed Central

    Morais-de-Sá, Eurico; Mirouse, Vincent; St Johnston, Daniel

    2010-01-01

    Summary Bazooka (PAR-3), PAR-6, and aPKC form a complex that plays a key role in the polarization of many cell types. In epithelial cells, however, Bazooka localizes below PAR-6 and aPKC at the apical/lateral junction. Here, we show that Baz is excluded from the apical aPKC domain in epithelia by aPKC phosphorylation, which disrupts the Baz/aPKC interaction. Removal of Baz from the complex is epithelial-specific because it also requires the Crumbs complex, which prevents the Baz/PAR-6 interaction. In the absence of Crumbs or aPKC phosphorylation of Baz, mislocalized Baz recruits adherens junction components apically, leading to a loss of the apical domain and an expansion of lateral. Thus, apical exclusion of Baz by Crumbs and aPKC defines the apical/lateral border. Although Baz acts as an aPKC targeting and specificity factor in nonepithelial cells, our results reveal that it performs a complementary function in positioning the adherens junction in epithelia. PMID:20434988

  14. Border Cave and the beginning of the Later Stone Age in South Africa

    PubMed Central

    Villa, Paola; Soriano, Sylvain; Tsanova, Tsenka; Degano, Ilaria; Higham, Thomas F. G.; d’Errico, Francesco; Backwell, Lucinda; Lucejko, Jeannette J.; Colombini, Maria Perla; Beaumont, Peter B.

    2012-01-01

    The transition from the Middle Stone Age (MSA) to the Later Stone Age (LSA) in South Africa was not associated with the appearance of anatomically modern humans and the extinction of Neandertals, as in the Middle to Upper Paleolithic transition in Western Europe. It has therefore attracted less attention, yet it provides insights into patterns of technological evolution not associated with a new hominin. Data from Border Cave (KwaZulu-Natal) show a strong pattern of technological change at approximately 44–42 ka cal BP, marked by adoption of techniques and materials that were present but scarcely used in the previous MSA, and some novelties. The agent of change was neither a revolution nor the advent of a new species of human. Although most evident in personal ornaments and symbolic markings, the change from one way of living to another was not restricted to aesthetics. Our analysis shows that: (i) at Border Cave two assemblages, dated to 45–49 and >49 ka, show a gradual abandonment of the technology and tool types of the post-Howiesons Poort period and can be considered transitional industries; (ii) the 44–42 ka cal BP assemblages are based on an expedient technology dominated by bipolar knapping, with microliths hafted with pitch from Podocarpus bark, worked suid tusks, ostrich eggshell beads, bone arrowheads, engraved bones, bored stones, and digging sticks; (iii) these assemblages mark the beginning of the LSA in South Africa; (iv) the LSA emerged by internal evolution; and (v) the process of change began sometime after 56 ka. PMID:22847432

  15. Border Cave and the beginning of the Later Stone Age in South Africa.

    PubMed

    Villa, Paola; Soriano, Sylvain; Tsanova, Tsenka; Degano, Ilaria; Higham, Thomas F G; d'Errico, Francesco; Backwell, Lucinda; Lucejko, Jeannette J; Colombini, Maria Perla; Beaumont, Peter B

    2012-08-14

    The transition from the Middle Stone Age (MSA) to the Later Stone Age (LSA) in South Africa was not associated with the appearance of anatomically modern humans and the extinction of Neandertals, as in the Middle to Upper Paleolithic transition in Western Europe. It has therefore attracted less attention, yet it provides insights into patterns of technological evolution not associated with a new hominin. Data from Border Cave (KwaZulu-Natal) show a strong pattern of technological change at approximately 44-42 ka cal BP, marked by adoption of techniques and materials that were present but scarcely used in the previous MSA, and some novelties. The agent of change was neither a revolution nor the advent of a new species of human. Although most evident in personal ornaments and symbolic markings, the change from one way of living to another was not restricted to aesthetics. Our analysis shows that: (i) at Border Cave two assemblages, dated to 45-49 and >49 ka, show a gradual abandonment of the technology and tool types of the post-Howiesons Poort period and can be considered transitional industries; (ii) the 44-42 ka cal BP assemblages are based on an expedient technology dominated by bipolar knapping, with microliths hafted with pitch from Podocarpus bark, worked suid tusks, ostrich eggshell beads, bone arrowheads, engraved bones, bored stones, and digging sticks; (iii) these assemblages mark the beginning of the LSA in South Africa; (iv) the LSA emerged by internal evolution; and (v) the process of change began sometime after 56 ka. PMID:22847432

  16. Recycling.

    ERIC Educational Resources Information Center

    Sinker, Barbara

    1986-01-01

    Discusses the range of benefits resulting from recycling efforts and projects. Presents information and data related to the recycling of metals, cans, paper, fans, and plastics. Suggestions for motivating and involving youth in recycling programs are also offered. (ML)

  17. LED system performance in a trial installation - one year later: Yuma border patrol, Yuma, Arizona

    SciTech Connect

    Wilkerson, Andrea M.; Davis, Robert G.

    2015-04-01

    The Yuma Sector Border Patrol Area is a high temperature and high solar radiation environment, providing an opportunity for the U.S. Department of Energy (DOE) to study thermal effects on outdoor light-emitting diode (LED) luminaires outside of the testing laboratory. Six LED luminaires were installed on three poles on the U.S.- Mexico border in February 2014 as part of a trial installation, which was detailed in a prior GATEWAY report.1 The initial trial installation was intended as a short - term test of six luminaires installed on three poles before proceeding with the complete installation of over 400 luminaires. Unexpected delays in the full installation have prevented the detailed evaluations initially planned, but the six installed LED luminaires continue to be monitored, and over the past year illuminance measurements were recorded initially in February 2014 and again in September 2014 at about 2500 hours of operation and in March 2015 at about 5000 hours of operation.

  18. Recycling

    NASA Astrophysics Data System (ADS)

    Goto, Junya; Santorelli, Michael

    Recycling systems are classified into those employing typically three methods, and the progress of each method is described. In mechanical recycling, powders of phenolic materials are recovered via a mechanical process and reused as fillers or additives in virgin materials. The effects to flowability, curability, and mechanical properties of the materials are explained. In feedstock recycling, monomers, oligomers, or oils are recovered via chemical processes and reused as feedstock. Pyrolysis, solvolysis or hydrolysis, and supercritical or subcritical fluid technology will also be introduced. When using a subcritical fluid of phenol, the recycled material maintains excellent properties similar to the virgin material, and a demonstration plant has been constructed to carry out mass production development. In energy recovery, wastes of phenolic materials are used as an alternative solid fuel to coal because they are combustible and have good calorific value. Industrial wastes of these have been in practical use in a cement plant. Finally, it is suggested that the best recycling method should be selected according to the purpose or situation, because every recycling method has both strengths and weaknesses. Therefore, quantitative and objective evaluation methods in recycling are desirable and should be established.

  19. Correlates of Early versus Later Initiation into Sex Work in Two Mexico–U.S. Border Cities

    PubMed Central

    Loza, Oralia; Strathdee, Steffanie A.; Lozada, Remedios; Staines, Hugo; Ojeda, Victoria D.; Martínez, Gustavo A.; Amaro, Hortensia; Patterson, Thomas L.

    2009-01-01

    Purpose To examine correlates of early initiation into sex work in two Mexico–U.S. border cities. Methods Female sex workers (FSWs) ≥18 years without known HIV infection living in Tijuana and Ciudad Juarez who had recent unprotected sex with clients underwent baseline interviews. Correlates of initiation into sex work before age 18 were identified with logistic regression. Results Of 920 FSWs interviewed in Tijuana (N=474) and Ciudad Juarez (N=446), 9.8% (N=90) were early initiators (<18 years) into sex work. Median age of entry into sex work was 26 years (range: 6–58). After adjusting for age, compared to older initiators, early initiators were more likely to use inhalants (21.1% vs 9.6%, p=0.002), initiate sex work to pay for alcohol (36.7% vs 18.4%, p<.001), report abuse as a child (42.2% vs 18.7%, p<.0001), and they were less likely to be migrants (47.8% vs 62.3%, p=0.02). Factors independently associated with early initiation included inhalant use (adjOR=2.39), initiating sex work to pay for alcohol (adjOR=1.88) and history of child abuse (adjOR=2.92). Factors associated with later initiation included less education (adjOR=0.43 per 5-year increase), migration (adjOR=0.47), and initiating sex work for better pay (adjOR=0.44) or to support children (adjOR=0.03). Conclusions Different pathways for entering sex work are apparent among younger versus older females in the Mexico–U.S. border region. Among girls, interventions are needed to prevent inhalant use and child abuse and to offer coping skills; among older initiators, income-generating strategies, childcare, and services for migrants may help to delay or prevent entry into sex work. PMID:20123256

  20. Solid earth as a recycling systems and the lateral growth of Precambrian North America

    NASA Technical Reports Server (NTRS)

    Veizer, Jan

    1988-01-01

    If plotted on mass vs time diagrams, geologic entities (for example, continental and oceanic crust, sediments, and mineral resources) display an exponential (power law) relationship, with entity per unit time increasing toward the present. This relationship is consistent with the concept of recycling and can be simulated mathematically. The approach is based on the plate tectonic theory and considers area-age or mass-age distributions of crystalline basement and sediments for major global tectonic realms. Each tectonic realm is characterized by a specific lifespan, which is an inverse function of its recycling rate. The estimated average half-area of half-mass ages are given. The corresponding parameters for continental crust are 690 Ma for K/Ar, and approximately 1200 Ma for Rb/St and U-Th/Pb dating pairs. Tectonic diversity preserved in the geologic record is therefore a function of time, with oceanic tectonic realms, because of their rapid recycling, underrepresented in the rocks older than approximately 300 Ma. The Sm/Nd isotopic systematic of sediments suggest that, for a near steady-state post-Archean sedimentary mass, recycling is approximately 90 + or - 5 percent cannibalistic. This yields an estimated upper limit on crust-mantle exchange via sediment subduction of approximately 1.1 + or - 0.5 x 10 g a(sup -1) considerably less than demanded by isotopic constraints. The discrepancy may indicate the existence of additional loci, such as orogenic belts, for significant crust-mantle interaction.

  1. The Wheelabrator Falls story -- Integrated recycling, highly efficient energy recovery: An update two years later

    SciTech Connect

    Felago, R.T.; Anderson, R.L.; Scanlon, P.J.

    1996-12-31

    Wheelabrator Environmental Systems Inc., based in Hampton, New Hampshire, has developed America`s first privately initiated, totally integrated Materials Recovery Facility (MRF) with a commercial trash-to-energy facility in Falls Township, Bucks County, Pennsylvania. The MRF is successfully recovering and marketing a variety of recycled products, while demonstrating that waste-to-energy and recycling are compatible and can be successfully integrated at a single site. The energy recovery plant and the MRF have completed one year of operation, giving adequate time to evaluate the impact of project innovations. These innovations will have a significant impact on how future projects, including waste-to-energy, wastewater and biosolids processing, will be developed. The energy recovery facility is capable of processing 1,600 tons per day of municipal solid waste from the Bucks County area.

  2. GATEWAY Demonstrations: LED System Performance in a Trial Installation--One Year Later, Yuma Border Patrol, Yuma, Arizona

    SciTech Connect

    Wilkerson, A. M.; Davis, R. G.

    2015-04-01

    Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations at the Yuma Sector Border Patrol Area in Yuma, Arizona. The retrofit was documented to better understand LED technology performance in high-temperature environments. This report follows the GATEWAY Yuma Phase 1.0 Report and reflects LED system results documented one year after the demonstration began.

  3. Numerical Model of Lateral Electric Field Excited Resonator on Piezoelectric Plate Bordered with Viscous and Conductive Liquid

    NASA Astrophysics Data System (ADS)

    Teplykh, Andrey; Zaitsev, Boris; Kuznetsova, Iren

    The numerical method of calculation of characteristics of lateral electric field excited resonator contacting with viscous and conducting liquid and results of these calculations are described. The method based on finite element analysis allows to find the distribution of mechanical and electrical fields in piezoelectric plate and liquid and to calculate the frequency dependencies of electrical impedance and admittance of resonator. It has been shown that values of real parts of impedance and admittance on resonant frequencies unambiguously correspond to viscosity and conductivity of liquid.

  4. Role of lateral cell-cell border location and extracellular/transmembrane domains in PECAM/CD31 mechanosensation.

    PubMed

    Kaufman, David A; Albelda, Steven M; Sun, Jing; Davies, Peter F

    2004-08-01

    Phosphorylation of tyrosine residues on platelet-endothelial cell adhesion molecule-1 (PECAM-1), followed by signal transduction events, has been described in endothelial cells following exposure to hyperosmotic and fluid shear stress. However, it is unclear whether PECAM-1 functions as a primary mechanosensor in this process. Utilizing a PECAM-1-null EC-like cell line, we examined the importance of cellular localization and the extracellular and transmembrane domains in PECAM-1 phosphorylation responses to mechanical stress. Tyrosine phosphorylation of PECAM-1 was stimulated in response to mechanical stress in null cells transfected either with full length PECAM-1 or with PECAM-1 mutants that do not localize to the lateral cell-cell adhesion site and that do not support homophilic binding between PECAM-1 molecules. Furthermore, null cells transfected with a construct that contains the intact cytoplasmic domain of PECAM-1 fused to the extracellular and transmembrane domains of the interleukin-2 receptor also underwent mechanical stress-induced PECAM-1 tyrosine phosphorylation. These findings suggest that mechanosensitive PECAM-1 may lie downstream of a primary mechanosensor that activates a tyrosine kinase. PMID:15249199

  5. 75 FR 62807 - Northern Border Pipeline Company; Notice of Availability of the Environmental Assessment for the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-13

    ... Energy Regulatory Commission Northern Border Pipeline Company; Notice of Availability of the... Princeton Lateral Project proposed by Northern Border Pipeline Company (Northern Border) in the above referenced docket. Northern Border requests authorization to construct pipeline facilities to...

  6. Late Oligocene to early Miocene lateral extrusion at the eastern border of the Lepontine dome of the central Alps (Bergell and Insubric areas, eastern central Alps)

    NASA Astrophysics Data System (ADS)

    Ciancaleoni, Laurent; Marquer, Didier

    2008-07-01

    How the internal domain of the central Alps deformed during late stages of the continental collision remains poorly understood. To fill this gap in knowledge, we present new data constraining the late Alpine brittle and brittle-ductile tectonics in Oligocene intrusions of the Bergell Alps (eastern central Alps). Syncollisional late normal faulting is widespread at all investigated scales, but part of the deformation observed is also associated with oblique-slip and transcurrent displacements. The faults are explained by stress permutations in space and time implying the three principal stress axes and correspond to different homoaxial states of stress of one single transtensive tectonic event. Motion on these faults accommodated coeval orogen-parallel extension and orogen-perpendicular contraction, during oblique indentation by the Southern alpine crust. Extensional and transcurrent structures likely formed by lateral extrusion of the Bergell Alps via distributed eastward extrusion of imbricated wedge-shaped crustal blocks, during the late Oligocene and lower Miocene. A first-order wedge-shaped crustal block in the Bergell Alps is represented by three coeval segments of the Periadriatic Fault System (namely the Tonale, Engadine, and Forcola faults). The eastern central segment of the Alpine belt appears to have deformed during the late Oligocene and lower Miocene in a similar way to its extremities where lateral escape tectonics occurred at least until the upper Miocene, according to free boundary availabilities.

  7. Recycling, Inc.

    ERIC Educational Resources Information Center

    Martin, Amy

    1992-01-01

    Suggestions for creating a successful office recycling system are enumerated from start up plans to waste reduction and paper recycling. Contact information for recycling equipment, potential buyers of recycled materials, recycled products for purchase, and ideas for promotion and education of staff are included. (MCO)

  8. Recycling endosomes

    PubMed Central

    Goldenring, James R

    2015-01-01

    The endosomal membrane recycling system represents a dynamic conduit for sorting and re-exporting internalized membrane constituents. The recycling system is composed of multiple tubulovesicular recycling pathways that likely confer distinct trafficking pathways for individual cargoes. In addition, elements of the recycling system are responsible for assembly and maintenance of apical membrane specializations including primary cilia and apical microvilli. The existence of multiple intersecting and diverging recycling tracks likely accounts for specificity in plasma membrane recycling trafficking. PMID:26022676

  9. Hanford recycling

    SciTech Connect

    Leonard, I.M.

    1996-09-01

    This paper is a study of the past and present recycling efforts on the Hanford site and options for future improvements in the recycling program. Until 1996, recycling goals were voluntarily set by the waste generators: this year, DOE has imposed goals for all its sites to accomplish by 1999. Hanford is presently meeting the voluntary site goals, but may not be able to meet all the new DOE goals without changes to the program. Most of these new DOE goals are recycling goals: * Reduce the generation of radioactive (low-level) waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of low-level mixed waste from routine operations 50 percent through source reduction and recycling. * Reduce the generation of hazardous waste from routine operations 50 percent through source reduction and recycling. * Recycle 33 percent of the sanitary waste from all operations. * Increase affirmative procurement of EPA-designated recycled items to 100 percent. The Hanford recycling program has made great strides-there has been a 98 percent increase in the amount of paper recycled since its inception in 1990. Hanford recycles paper, chemicals cardboard, tires, oil, batteries, rags, lead weights, fluorescent tubes, aerosol products, concrete, office furniture, computer software, drums, toner cartridges, and scrap metal. Many other items are recycled or reused by individual groups on a one time basis without a formal contract. Several contracts are closed-loop contracts which involve all parts of the recycle loop. Considerable savings are generated from recycling, and much more is possible with increased attention and improvements to this program. General methods for improving the recycling program to ensure that the new goals can be met are: a Contract and financial changes 0 Tracking database and methods improvements 0 Expanded recycling efforts. Specifically, the Hanford recycling program would be improved by: 0 Establishing one overall

  10. Recycled roads

    SciTech Connect

    Tarricone, P.

    1993-04-01

    This article examines the efforts of various states in the USA to recycle waste materials in highway construction as fill and pavements. The topics of the article include recycling used tires whole, ground, and shredded, cost of recycling, wood fiber chips as fill material in embankments, and mining wastes used to construct embankments and as coarse aggregates in asphalt pavement.

  11. What can Recycling in Thermal Reactors Accomplish?

    SciTech Connect

    Steven Piet; Gretchen E. Matthern; Jacob J. Jacobson

    2007-09-01

    Thermal recycle provides several potential benefits when used as stop-gap, mixed, or backup recycling to recycling in fast reactors. These three roles involve a mixture of thermal and fast recycling; fast reactors are required to some degree at some time. Stop-gap uses thermal reactors only until fast reactors are adequately deployed and until any thermal-recycle-only facilities have met their economic lifetime. Mixed uses thermal and fast reactors symbiotically for an extended period of time. Backup uses thermal reactors only if problems later develop in the fast reactor portion of a recycling system. Thermal recycle can also provide benefits when used as pure thermal recycling, with no intention to use fast reactors. However, long term, the pure thermal recycling approach is inadequate to meet several objectives.

  12. Border Trade Facilitation System

    Energy Science and Technology Software Center (ESTSC)

    1999-06-07

    System for managing commercial trans-border shipments via the Internet. This application assists geographically distributed commercial and governmental users with the transshipment of goods across the U.S. - Mexico border.

  13. Textile recycling

    SciTech Connect

    Jablonowski, E. ); Carlton, J.

    1995-01-01

    The most common household textiles include clothing, linens, draperies, carpets, shoes, handbags, and rugs. Old clothing, of course, is the most readily reused and/or recycled residentially generated textile category. State and/or local mandates to recycle a percentage of the waste stream are providing the impetus to add new materials to existing collection programs. Concurrently, the textile industry is aggressively trying to increase its throughput by seeking new sources of material to meet increased world demand for product. As experienced with drop-off programs for traditional materials, a majority of residents will not recycle materials unless the collection programs are convenient, i.e., curbside collection. The tonnage of marketable textiles currently being landfilled provide evidence of this. It is the authors' contention that if textile recycling is made convenient and accessible to every household in a municipality or region, then the waste stream disposed may be reduced in a similar fashion as when traditional recyclables are included in curbside programs.

  14. Tire Recycling

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Cryopolymers, Inc. tapped NASA expertise to improve a process for recycling vehicle tires by converting shredded rubber into products that can be used in asphalt road beds, new tires, hoses, and other products. In conjunction with the Southern Technology Applications Center and Stennis Space Center, NASA expertise in cryogenic fuel-handling needed for launch vehicle and spacecraft operations was called upon to improve the recycling concept. Stennis advised Cryopolymers on the type of equipment required, as well as steps to reduce the amount of liquid nitrogen used in the process. They also guided the company to use more efficient ways to control system hardware. It is estimated that more than 300 million tires nationwide are produced per year. Cryopolymers expects to reach a production rate of 5,000 tires recycled per day.

  15. The Border Pedagogy Revisited

    ERIC Educational Resources Information Center

    Kazanjian, Christopher John

    2011-01-01

    Border pedagogy is a multicultural educational approach utilized in multicultural settings to help students understand their histories and experiences and how it affects their identities and cultures. The approach seeks to produce intellectuals that transcend physical and metaphysical boundaries. The goal of border pedagogy is to remove cultural…

  16. 40 CFR 141.76 - Recycle provisions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.76 Recycle provisions. (a... completed no later than June 8, 2006. (d) Recordkeeping. The system must collect and retain on file...

  17. Precipitation Recycling

    NASA Technical Reports Server (NTRS)

    Eltahir, Elfatih A. B.; Bras, Rafael L.

    1996-01-01

    The water cycle regulates and reflects natural variability in climate at the regional and global scales. Large-scale human activities that involve changes in land cover, such as tropical deforestation, are likely to modify climate through changes in the water cycle. In order to understand, and hopefully be able to predict, the extent of these potential global and regional changes, we need first to understand how the water cycle works. In the past, most of the research in hydrology focused on the land branch of the water cycle, with little attention given to the atmospheric branch. The study of precipitation recycling which is defined as the contribution of local evaporation to local precipitation, aims at understanding hydrologic processes in the atmospheric branch of the water cycle. Simply stated, any study on precipitation recycling is about how the atmospheric branch of the water cycle works, namely, what happens to water vapor molecules after they evaporate from the surface, and where will they precipitate?

  18. Bordering on environmental disaster.

    PubMed Central

    Schmidt, C W

    2000-01-01

    Millions of people live on the U.S.-Mexico border, drawn by employment opportunities from industry and agriculture, and booming growth is expected to continue in the coming decades. But the influx of people has long outstripped the capacity of border towns and cities to provide for their citizens, and a large percentage of the population lives in sprawling, underserviced shantytowns. Although investment in environmental infrastructure on both sides has led to improvements, shortages among necessities such as drinking water, wastewater treatment, and solid waste disposal are at crisis levels. In addition, a host of diseases including gastrointestinal infections, asthma, tuberculosis, multiple myeloma, systemic lupus erythematosus, hepatitis A, neural tube defects, and lead poisoning have been linked to environmental conditions on the border. Ongoing binational studies are attempting to define the breadth of the public and environmental health crisis and find ways to help make the border a healthier place. PMID:10903625

  19. Recycling Lesson Plans.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Environmental Resources, Harrisburg.

    This document contains lesson plans about recycling for teachers in grades K-12. Titles include: (1) "Waste--Where Does It Come From? Where Does It Go?" (2) "Litter Detectives," (3) "Classroom Paper Recycling," (4) "Recycling Survey," (5) "Disposal and Recycling Costs," (6) "Composting Project," (7) Used Motor Oil Recycling," (8) "Unwrapping…

  20. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY

    EPA Science Inventory

    The Arizona Border Study, which measured levels of metals, pesticides, polynuclear aromatic hydrocarbons (PAHs), and volatile organic compounds (VOCs) in the Arizona counties bordering Mexico, is an extension of the Arizona National Human Exposure Assessment Survey (NHEXAS) Phase...

  1. Recycled pulsars

    NASA Astrophysics Data System (ADS)

    Jacoby, Bryan Anthony

    2005-11-01

    In a survey of ~4,150 square degrees, we discovered 26 previously unknown pulsars, including 7 "recycled" millisecond or binary pulsars. The most significant discovery of this survey is PSR J1909-3744, a 2.95 ms pulsar in an extremely circular 1.5 d orbit with a low-mass white dwarf companion. Though this system is a fairly typical low-mass binary pulsar (LMBP) system, it has several exceptional qualities: an extremely narrow pulse profile and stable rotation have enabled the most precise long-term timing ever reported, and a nearly edge-on orbit gives rise to a strong Shapiro delay which has allowed the most precise measurement of the mass of a millisecond pulsar: m p = (1.438 +/- 0.024) [Special characters omitted.] . Our accurate parallax distance measurement, d p = ([Special characters omitted.] ) kpc, combined with the mass of the optically-detected companion, m c = (0.2038 +/- 0.022) [Special characters omitted.] , will provide an important calibration for white dwarf models relevant to other LMBP companions. We have detected optical counterparts for two intermediate mass binary pulsar (IMBP) systems; taken together with optical detections and non-detections of several similar systems, our results indicate that the characteristic age t = c P /2 P consistently overestimates the time since the end of mass accretion in these recycled systems. We have measured orbital decay in the double neutron star system PSR B2127+11C in the globular cluster M15. This has allowed an improved measurement of the mass of the pulsar, m p = (1.3584 +/- 0.0097) [Special characters omitted.] , and companion, m c = (1.3544 +/- 0.0097) [Special characters omitted.] , as well as a test of general relativity at the 3% level. We find that the proper motions of this pulsar as well as PSR B2127+11A and PSR B2127+11B are consistent with each other and with one published measurement of the cluster proper motion. We have discovered three binary millisecond pulsars in the globular cluster M62

  2. Virtual sea border

    NASA Astrophysics Data System (ADS)

    Ferriere, D.; Rucinski, A.; Jankowski, T.

    2007-04-01

    Establishing a Virtual Sea Border by performing a real-time, satellite-accessible Internet-based bio-metric supported threat assessment of arriving foreign-flagged cargo ships, their management and ownership, their arrival terminal operator and owner, and rewarding proven legitimate operators with an economic incentive for their transparency will simultaneously improve port security and maritime transportation efficiencies.

  3. Green Science: Revisiting Recycling

    ERIC Educational Resources Information Center

    Palliser, Janna

    2011-01-01

    Recycling has been around for a long time--people have reused materials and refashioned them into needed items for thousands of years. More recently, war efforts encouraged conservation and reuse of materials, and in the 1970s recycling got its official start when recycling centers were created. Now, curbside recycling programs and recycling…

  4. "Over the River": Border Childhoods and Border Crossings at Niagara

    ERIC Educational Resources Information Center

    Helleiner, Jane

    2007-01-01

    Drawing on interviews with Canadian borderlanders, this article examines childhood experiences with the Canada--US border in the mid-1980s to early 1990s. The retrospective accounts of childhood border experiences demonstrate how childhood was produced and experienced in border crossings and how the production of childhood intersected with a…

  5. "Border Sexualities, Border Families in Schools": Queering Education

    ERIC Educational Resources Information Center

    Ryan, John

    2012-01-01

    This essay reviews Maria Pallotta-Chiarolli's (2010) Lambda Award-winning monograph "Border Sexualities, Border Families in Schools", in which queer and mestizage pedagogies frame a groundbreaking and highly accessible exploration of the issues that sexual border dwellers experience. Her particular focus areas are bisexual "sexually fluid"…

  6. BORDER INFECTIOUS DISEASES SURVEILLANCE PROJECT

    EPA Science Inventory

    In 1997, the Centers for Disease Control and Prevention, the Mexican Secretariat of Health, and border health officials began the development of the Border Infectious Disease Surveillance (BIDS) project, a surveillance system for infectious diseases along the U.S.-Mexico border. ...

  7. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--BORDER SUPPLEMENT QUESTIONNAIRE DATA

    EPA Science Inventory

    The Border Supplement Questionnaire data set provides information on the local environmental conditions. The information is from 203 Questionnaires for 91 households. In addition, the frequency of border crossing into Mexico and the characteristics of consumer purchases while t...

  8. Astronomers without borders

    NASA Astrophysics Data System (ADS)

    Simmons, Mike

    2011-06-01

    ``Astronomers Without Borders'' is a new global organisational dedicated to furthering understanding and goodwill across national and cultural boundaries using the universal appeal of astronomy and space science. A growing network of affiliate organisations brings together clubs, magazines and other organizations involved in astronomy and space science. Forums, galleries, video conferences and other interactive technologies are used to connect participants around the world. Sharing of resources and direct connections through travel programs are also planned. One project, ``The World at Night'' (TWAN), has become an Special Project of IYA2009. TWAN creates wide-angle images of the night sky in important natural and historic settings around the world, dramatically demonstrating the universal nature and appeal of the night sky. ``Astronomers Without Borders'' is also a leader of the 100 Hours of Astronomy IYA2009 Global Cornerstone Project.

  9. Recycled Art: Create Puppets Using Recycled Objects.

    ERIC Educational Resources Information Center

    Clearing, 2003

    2003-01-01

    Presents an activity from "Healthy Foods from Healthy Soils" for making puppets using recycled food packaging materials. Includes background information, materials, instructions, literature links, resources, and benchmarks. (NB)

  10. Recycle Used Oil on America Recycles Day.

    ERIC Educational Resources Information Center

    White, Boyd W.

    2000-01-01

    Explains that motor oils can be reused and recycled. Educates students about environmental hazards and oil management and includes classroom activities. Addresses the National Science Education Standards. (YDS)

  11. Metrics for border management systems.

    SciTech Connect

    Duggan, Ruth Ann

    2009-07-01

    There are as many unique and disparate manifestations of border systems as there are borders to protect. Border Security is a highly complex system analysis problem with global, regional, national, sector, and border element dimensions for land, water, and air domains. The complexity increases with the multiple, and sometimes conflicting, missions for regulating the flow of people and goods across borders, while securing them for national security. These systems include frontier border surveillance, immigration management and customs functions that must operate in a variety of weather, terrain, operational conditions, cultural constraints, and geopolitical contexts. As part of a Laboratory Directed Research and Development Project 08-684 (Year 1), the team developed a reference framework to decompose this complex system into international/regional, national, and border elements levels covering customs, immigration, and border policing functions. This generalized architecture is relevant to both domestic and international borders. As part of year two of this project (09-1204), the team determined relevant relative measures to better understand border management performance. This paper describes those relative metrics and how they can be used to improve border management systems.

  12. Packing in a tradition of recycling: Manufacturer-turned-recycler Free-Flow Packaging Corp. , Redwood City, Calif

    SciTech Connect

    White, K.M.

    1994-01-01

    Free-Flow Packaging Corp. recycles polystyrene. Loose-fill -- an industry name for expanded polystyrene (EPS) packaging modules, or what the public more commonly calls peanuts'' -- represents a material that can easily and economically be recycled over and over. The company manufactures a 100% recycled packaging peanut called FLO-PAK, as well as a variety of other EPS packaging products. Indeed, to date, Free-Flow Packaging has set up post-consumer EPS recycling operations at five of its 11 manufacturing facilities, both across the country and overseas. The corporation's original facility in Redwood City began this tradition when it first started processing industrial EPS scrap in 1978 and, later, pioneered the recycling of post-consumer EPS on site for use in its products in 1989. Now, only five years later, the result has produced a recycling operation that is truly successful, profitable, and closed-loop.

  13. Recycling overview in Sweden

    SciTech Connect

    Not Available

    1989-07-01

    This article discusses the recycling programs currently in use in Sweden. Recycling of newspapers, batteries, plastics are all mentioned in this report by the Swedish Association of Public Cleansing and Solid Waste Management.

  14. Recycling Research. Tracking Trash.

    ERIC Educational Resources Information Center

    DeLago, Louise Furia

    1991-01-01

    An activity in which students research the effectiveness of recycling is presented. Students compare the types and amount of litter both before and after recycling is implemented. Directions for the activity and a sample data sheet are included. (KR)

  15. Atmospheric Science Without Borders

    NASA Astrophysics Data System (ADS)

    Panday, Arnico; Praveen, Ps; Adhikary, Bhupesh; Bhave, Prakash; Surapipith, Vanisa; Pradhan, Bidya; Karki, Anita; Ghimire, Shreta; Thapa, Alpha; Shrestha, Sujan

    2016-04-01

    The Indo-Gangetic Plains (IGP) in northern South Asia are among the most polluted and most densely populated places in the world, and they are upwind of vulnerable ecosystems in the Himalaya mountains. They are also fragmented across 5 countries between which movement of people, data, instruments and scientific understanding have been very limited. ICIMOD's Atmosphere Initiative has for the past three years been working on filling data gaps in the region, while facilitating collaborations across borders. It has established several atmospheric observatories at low and mid elevations in Bhutan and Nepal that provide new data on the inflow of pollutants from the IGP towards the mountains, as well as quantify the effects of local emissions on air quality in mountain cities. EGU will be the first international conference where these data will be presented. ICIMOD is in the process of setting up data servers through which data from the region will be shared with scientists and the general public across borders. Meanwhile, to promote cross-border collaboration among scientists in the region, while addressing an atmospheric phenomenon that affects the lives of the several hundred million people, ICIMOD' Atmosphere Initiative has been coordinating an interdisciplinary multi-year study of persistent winter fog over the Indo-Gangetic Plains, with participation by researchers from Pakistan, India, China, Nepal, Bhutan and Bangladesh. Using a combination of in-situ measurements and sample collection, remote sensing, modeling and community based research, the researchers are studying how changing moisture availability and air pollution have led to increases in fog frequency and duration, as well as the fog's impacts on local communities and energy demand that may affect air pollution emissions. Preliminary results of the Winter 2015-2016 field campaign will be shown.

  16. Collaborating Across Borders

    NASA Astrophysics Data System (ADS)

    Flatten, Amy

    Physicists transcend national boundaries, ethnic differences, and scientific disciplines to address globally shared problems and questions. This talk will highlight how scientists have collaborated across borders - both geographic and scientific - to achieve ground-breaking discoveries through international scientific cooperation. The speaker also will address how international collaborations will be even more crucial for addressing future challenges faced by the physics community, such as building large-scale research facilities, strengthening scientific capacity in developing countries, fostering ''science for diplomacy'' in times of political tensions and other critical issues.

  17. Recycling and the automobile

    SciTech Connect

    Holt, D.J.

    1993-10-01

    This article examines the current status of automobile recycling and contains a summary of a survey which points out the major drivers and their impacts on automotive recycling. The topics of the article include computerized dismantling, polyurethane, sheet molding compound, polyester, thermoplastic polyester, recycling salvaged parts, vinyl and automotive shredder residue.

  18. The Sustainability of Recycling.

    ERIC Educational Resources Information Center

    Juniper, Christopher

    1993-01-01

    Describes the need for closing the business cycle in the recycling process. Discusses whether the government should mandate or the free market create uses for recycled products. Presents challenges associated with marketing recycled materials including what has been and what needs to be done to stimulate markets, encourage business, and balance…

  19. Rethink, Rework, Recycle.

    ERIC Educational Resources Information Center

    Wrhen, Linda; DiSpezio, Michael A.

    1991-01-01

    Information about the recycling and reuse of plastics, aluminum, steel, glass, and newspapers is presented. The phases of recycling are described. An activity that allows students to separate recyclable materials is included. The objectives, a list of needed materials, and procedure are provided. (KR)

  20. Isolation of renal brush borders.

    PubMed

    Morré, D James; Hammond, Timothy

    2007-03-01

    Methods are described to isolate intact brush borders and brush border membranes from renal cell homogenates. A rapid method yields sealed vesicles that reconstitute renal brush border transport. In one variation of this protocol, 10 to 20 mM CaCl2 or MgCl2 is added to aggregate non-brush border structures for subsequent removal by centrifugation. For analytical studies, guidance is provided for subsequent purification steps including preparative free-flow and aqueous two-phase partition. Marker enzymes and morphological parameters are included for assessment of yield and fraction purity. PMID:18228514

  1. 40 CFR 82.162 - Certification by owners of recovery and recycling equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and recycling equipment. 82.162 Section 82.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.162 Certification by owners of recovery and recycling equipment. (a) No later than August...

  2. 40 CFR 82.162 - Certification by owners of recovery and recycling equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and recycling equipment. 82.162 Section 82.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.162 Certification by owners of recovery and recycling equipment. (a) No later than August...

  3. 40 CFR 82.162 - Certification by owners of recovery and recycling equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and recycling equipment. 82.162 Section 82.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.162 Certification by owners of recovery and recycling equipment. (a) No later than August...

  4. 40 CFR 82.162 - Certification by owners of recovery and recycling equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and recycling equipment. 82.162 Section 82.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.162 Certification by owners of recovery and recycling equipment. (a) No later than August...

  5. 40 CFR 82.162 - Certification by owners of recovery and recycling equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and recycling equipment. 82.162 Section 82.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) PROTECTION OF STRATOSPHERIC OZONE Recycling and Emissions Reduction § 82.162 Certification by owners of recovery and recycling equipment. (a) No later than August...

  6. Crossing borders for science.

    PubMed

    Schultheiss, Sebastian J; Yang, Joshua SungWoo; Iwasaki, Wataru; Lin, Shu-Hsi; Jean, Angela; Michaut, Magali

    2014-03-01

    Exchanging ideas with like-minded, enthusiastic people interested in the same topic is crucial for the advancement of a scientist's career. Several Regional Student Groups (RSGs) of the International Society for Computational Biology (ISCB) Student Council have cooperated in the last six years to organize scientific workshops and conferences. With motivated students, it is possible to create a memorable event for fellow scientists; in doing so, the organizers gain valuable experiences. While collaborating across borders and time zones can be difficult, feedback from event organizers was always positive. When limited resources are juxtaposed with great ideas and a network of contacts, the outcome is always an amazing experience, despite organizers being separated geographically across different countries. PMID:24675824

  7. Life on the Hardened Border

    ERIC Educational Resources Information Center

    Miller, Bruce Granville

    2012-01-01

    The many Coast Salish groups distributed on both sides of the United States-Canada border on the Pacific coast today face significant obstacles to cross the international border, and in some cases are denied passage or intimidated into not attempting to cross. The current situation regarding travel by Aboriginal people reflects the "hardening" of…

  8. REGULATIONS ON PHOTOVOLTAIC MODULE DISPOSAL AND RECYCLING.

    SciTech Connect

    FTHENAKIS,V.

    2001-01-29

    Environmental regulations can have a significant impact on product use, disposal, and recycling. This report summarizes the basic aspects of current federal, state and international regulations which apply to end-of-life photovoltaic (PV) modules and PV manufacturing scrap destined for disposal or recycling. It also discusses proposed regulations for electronics that may set the ground of what is to be expected in this area in the near future. In the US, several states have started programs to support the recycling of electronic equipment, and materials destined for recycling often are excepted from solid waste regulations during the collection, transfer, storage and processing stages. California regulations are described separately because they are different from those of most other states. International agreements on the movement of waste between different countries may pose barriers to cross-border shipments. Currently waste moves freely among country members of the Organization of Economic Cooperation and Development (OECD), and between the US and the four countries with which the US has bilateral agreements. However, it is expected, that the US will adopt the rules of the Basel Convention (an agreement which currently applies to 128 countries but not the US) and that the Convection's waste classification system will influence the current OECD waste-handling system. Some countries adopting the Basel Convention consider end-of-life electronics to be hazardous waste, whereas the OECD countries consider them to be non-hazardous. Also, waste management regulations potentially affecting electronics in Germany and Japan are mentioned in this report.

  9. Microsensors for border patrol applications

    NASA Astrophysics Data System (ADS)

    Falkofske, Dwight; Krantz, Brian; Shimazu, Ron; Berglund, Victor

    2005-05-01

    A top concern in homeland security efforts is the lack of ability to monitor the thousands of miles of open border with our neighbors. It is not currently feasible to continually monitor the borders for illegal intrusions. The MicroSensor System (MSS) seeks to achieve a low-cost monitoring solution that can be efficiently deployed for border patrol applications. The modifications and issues regarding the unique requirements of this application will be discussed and presented. The MicroSensor System was developed by the Defense Microelectronics Activity (DMEA) for military applications, but border patrol applications, with their unique sensor requirements, demand careful adaptation and modification from the military application. Adaptation of the existing sensor design for border applications has been initiated. Coverage issues, communications needs, and other requirements need to be explored for the border patrol application. Currently, border patrol has a number of deficiencies that can be addressed with a microsensor network. First, a distributed networked sensor field could mitigate the porous border intruder detection problem. Second, a unified database needs to be available to identify aliens attempting to cross into the United States. This database needs to take unique characteristics (e.g. biometrics, fingerprints) recovered from a specialized field unit to reliably identify intruders. Finally, this sensor network needs to provide a communication ability to allow border patrol officers to have quick access to intrusion information as well as equipment tracking and voice communication. MSS already addresses the sensing portion of the solution, including detection of acoustic, infrared, magnetic, and seismic events. MSS also includes a low-power networking protocol to lengthen the battery life. In addition to current military requirements, MSS needs a solar panel solution to extend its battery life to 5 years, and an additional backbone communication link

  10. Benchmarking survey for recycling.

    SciTech Connect

    Marley, Margie Charlotte; Mizner, Jack Harry

    2005-06-01

    This report describes the methodology, analysis and conclusions of a comparison survey of recycling programs at ten Department of Energy sites including Sandia National Laboratories/New Mexico (SNL/NM). The goal of the survey was to compare SNL/NM's recycling performance with that of other federal facilities, and to identify activities and programs that could be implemented at SNL/NM to improve recycling performance.

  11. THE ROLE OF IMMIGRATION AGE ON ALCOHOL AND DRUG USE AMONG BORDER AND NON-BORDER MEXICAN AMERICANS

    PubMed Central

    Reingle, Jennifer M.; Caetano, Raul; Mills, Britain A.; Vaeth, Patrice A. C.

    2014-01-01

    Background To determine the age of immigration at which the marked increase in risk for alcohol- and drug use problems in adulthood is observed among Mexican American adults residing in two distinct contexts: the U.S.-Mexico border, and cities not proximal to the border. Methods We used two samples of Mexican American adults; specifically, 1,307 who resided along the U.S.-Mexico border, and 1,288 non-border adults who were interviewed as a part of the 2006 Hispanic Americans Baseline Alcohol Survey study. Survey logistic and Zero-Inflated Poisson methods were used to examine how immigration age during adolescence is related to alcohol and drug use behavior in adulthood. Results We found that participants who immigrate to the U.S. prior to age 12 have qualitatively different alcohol- and drug-related outcomes compared to those who immigrate later in life. Adults who immigrated at younger ages have alcohol and drug use patterns similar to those who were U.S.-born. Similarly, adults who immigrated at younger ages and live along the U.S.-Mexico border are at greater risk for alcohol and drug use than those who live in non-border contexts. Conclusions Immigration from Mexico to the U.S. before age 12 results in alcohol and drug-related behavior that mirrors the behavior of U.S.-born residents. PMID:24846850

  12. Combustion Byproducts Recycling Consortium

    SciTech Connect

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Ashlines: To promote and support the commercially viable and environmentally sound recycling of coal combustion byproducts for productive uses through scientific research, development, and field testing.

  13. AIRCRAFT INDUSTRY WASTEWATER RECYCLING

    EPA Science Inventory

    The feasibility of recycling certain categories of water used in the manufacture of airplanes was demonstrated. Water in four categories was continuously recycled in 380-liter (100-gallon) treatment plants; chemical process rinse water, dye-penetrant crack-detection rinse water, ...

  14. Wee Recyclers Resources.

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Natural Resources, Madison.

    Hands-on activities in this guide are designed to help preschool children (ages 3-5) understand that reducing, reusing, and recycling preserves natural resources and prolongs the life of landfills. Children sort, match and compare recyclable items and learn to separate some items by number and color. The 29 activities are divided into units that…

  15. The Fermilab recycler ring

    SciTech Connect

    Martin Hu

    2001-07-24

    The Fermilab Recycler is a permanent magnet storage ring for the accumulation of antiprotons from the Antiproton Source, and the recovery and cooling of the antiprotons remaining at the end of a Tevatron store. It is an integral part of the Fermilab III luminosity upgrade. The following paper describes the design features, operational and commissioning status of the Recycler Ring.

  16. Carbon dioxide recycling

    EPA Science Inventory

    The recycling of carbon dioxide to methanol and dimethyl ether is seen to offer a substantial route to renewable and environmentally carbon neutral fuels. One of the authors has championed the “Methanol Economy" in articles and a book. By recycling ambient CO2, the authors argue ...

  17. Design for aluminum recycling

    SciTech Connect

    Not Available

    1993-10-01

    This article describes the increasing use of aluminum in automobiles and the need to recycle to benefit further growth of aluminum applications by assuring an economical, high-quality source of metal. The article emphasizes that coordination of material specifications among designers can raise aluminum scrap value and facilitate recycling. Applications of aluminum in automobile construction are discussed.

  18. Reuse, Reduce, Recycle.

    ERIC Educational Resources Information Center

    Briscoe, Georgia

    1991-01-01

    Discussion of recycling paper in law libraries is also applicable to other types of libraries. Results of surveys of law libraries that investigated recycling practices in 1987 and again in 1990 are reported, and suggestions for reducing the amount of paper used and reusing as much as possible are offered. (LRW)

  19. Recycling at Camp.

    ERIC Educational Resources Information Center

    Cummins, William M.

    1988-01-01

    Outlines a Michigan summer camp's efforts to reduce solid waste disposal by recycling cardboard, tin, glass, aluminum, and plastic milk containers. Points out variables affecting the success of such efforts. Discusses Michigan state funding for the development of recycling programs. (SV)

  20. Advanced border monitoring sensor system

    NASA Astrophysics Data System (ADS)

    Knobler, Ronald A.; Winston, Mark A.

    2008-04-01

    McQ has developed an advanced sensor system tailored for border monitoring that has been delivered as part of the SBInet program for the Department of Homeland Security (DHS). Technology developments that enhance a broad range of features are presented in this paper, which address the overall goal of the system to improving unattended ground sensor system capabilities for border monitoring applications. Specifically, this paper addresses a system definition, communications architecture, advanced signal processing to classify targets, and distributed sensor fusion processing.

  1. Advances in plastic recycling. Volume 1: Recycling of polyurethanes

    SciTech Connect

    Frisch, K.C.; Klempner, D.; Prentice, G.

    1999-07-01

    ``Recycling of Polyurethanes'', the first volume in the Advances in Plastics Recycling series, is focused on the physical and chemical recycling of polyurethanes, with attention given to energy conversion. A compilation of the present ongoing studies on recycling of urethane and, in general, isocyanate-based polymers, the focus is on thermosetting urethane polymers. Contents include: Recycling of Polyurethane Plastics in the European Automotive Industry; Present State of Polyurethane Recycling in Europe; Processing Overview of Bonded Polyurethane Foam; Mechanical Recycling of Polyurethane Scrap; Ecostream{trademark}--A Technology Beyond Recycling; Recycling of Flexible polyurethane Foam; General purpose Adhesives Prepared from Chemically Recycled Waste Rigid Polyurethane Foams; and Utilization of Isocyanate Binders in Recycling of Scrap Automotive Headliners.

  2. Software recycling at the Hanford Site

    SciTech Connect

    HINKELMAN, K.C.

    1999-11-03

    The Hanford Site was the first Department of Energy (DOE) complex to recycle excess software rather than dispose of it in the landfill. This plan, which took over a year to complete, was reviewed for potential legal conflicts, which could arise from recycling rather than disposal of software. It was determined that recycling was an approved method of destruction and therefore did not conflict with any of the licensing agreements that Hanford had with the software manufacturers. The Hanford Recycling Program Coordinator combined efforts with Pacific Northwest National Laboratory (PNNL) to recycle all Hanford software through a single contract, which went out for bid in January 1995. It was awarded to GreenDisk, Inc. located in Woodinville Washington and implemented in March 1995. The contract was later re-bid and awarded to EcoDisWGreenDisk in December 1998. The new contract included materials such as; software manuals, diskettes, tyvek wrapping, cardboard & paperboard packaging, compact disks (CDs), videotapes, reel-to-reel tapes, magnetic tapes, audio tapes, and many other types of media.

  3. Solvent recycle/recovery

    SciTech Connect

    Paffhausen, M.W.; Smith, D.L.; Ugaki, S.N.

    1990-09-01

    This report describes Phase I of the Solvent Recycle/Recovery Task of the DOE Chlorinated Solvent Substitution Program for the US Air Force by the Idaho National Engineering Laboratory, EG G Idaho, Inc., through the US Department of Energy, Idaho Operations Office. The purpose of the task is to identify and test recovery and recycling technologies for proposed substitution solvents identified by the Biodegradable Solvent Substitution Program and the Alternative Solvents/Technologies for Paint Stripping Program with the overall objective of minimizing hazardous wastes. A literature search to identify recycle/recovery technologies and initial distillation studies has been conducted. 4 refs.

  4. Recycling of auto shredder residue.

    PubMed

    Nourreddine, Menad

    2007-01-31

    Currently, about 75% of end-of-life vehicle's (ELV) total weight is recycled in EU countries. The remaining 25%, which is called auto shredder residues (ASR) or auto fluff, is disposed of as landfill because of its complexity. It is a major challenge to reduce this percentage of obsolete cars. The European draft directive states that by the year 2006, only 15% of the vehicle's weight can be disposed of at landfill sites and by 2015, this will be reduced to 5%. The draft directive states that a further 10% can be incinerated. The quantities of shredder fluff are likely to increase in the coming years. This is because of the growing number of cars being scrapped, coupled with the increase in the amount of plastics used in cars. In Sweden, some current projects are focusing on recycling of ASR material. In this paper some different alternatives for using this material are reported. The hypothetical injection of ASR into a blast furnace concentrating on ASR's effect to some blast furnace (BF) parameters has been completed using a blast furnace mass balance model. As a result, in principle, ASR can be used as reducing agent in the BF process if certain conditions are met. The particle size of ASR material must be controlled to ensure optimal gasification of the material in the raceway. Regarding the chemical composition of ASR, the non-ferrous content can affect the pig iron quality, which is difficult to rectify at a later point. The most attractive recycling alternative is to use the products obtained from pyrolysis of ASR in appropriate metallurgical processes. PMID:16600493

  5. Introducing Multicultural Science into the Chemistry Curriculum in the Mexican-American Border Region

    ERIC Educational Resources Information Center

    Smith, K. Christopher; Cardenas, Angelica

    2012-01-01

    Traditional beliefs in the Mexican-American border region were compiled by students in an introductory general chemistry course. A subset of these traditional beliefs was used to develop a survey administered in later chemistry courses and as the basis for short research studies conducted by students in these later chemistry courses. The data…

  6. The Totem Pole Recycled.

    ERIC Educational Resources Information Center

    Sewall, Susan Breyer

    1991-01-01

    Presents an activity that integrates science, environmental education, art, and social studies. Students identify and research an endangered species and construct a totem pole depicting the species using a recyclable material. (MDH)

  7. A Practical Recycling Project . . .

    ERIC Educational Resources Information Center

    Durant, Raymond H.; Mikuska, James M.

    1973-01-01

    Descirbes a school district's recycling program of aluminum lunch trays that are collected after their use. The trays are used as scrap metal in industrial education workshop and used for sand castings. (PS)

  8. Recycle plastics into feedstocks

    SciTech Connect

    Kastner, H.; Kaminsky, W.

    1995-05-01

    Thermal cracking of mixed-plastics wastes with a fluidized-bed reactor can be a viable and cost-effective means to meet mandatory recycling laws. Strict worldwide environmental statutes require the hydrocarbon processing industry (HPI) to develop and implement product applications and technologies that reuse post-consumer mixed-plastics waste. Recycling or reuse of plastics waste has a broad definition. Recycling entails more than mechanical regranulation and remelting of polymers for film and molding applications. A European consortium of academia and refiners have investigated if it is possible and profitable to thermally crack plastics into feedstocks for refining and petrochemical applications. Development and demonstration of pyrolysis methods show promising possibilities of converting landfill garbage into valuable feedstocks such as ethylene, propylene, BTX, etc. Fluidized-bed reactor technologies offer HPI operators a possible avenue to meet recycling laws, conserve raw materials and yield a profit. The paper describes thermal cracking for feedstocks and pyrolysis of polyolefins.

  9. Deep Recycling of Carbon

    NASA Astrophysics Data System (ADS)

    Schmidt, M. W.

    2012-12-01

    While most of the subducted H2O is recycled at shallow and subarc depths, carbon is less readily mobilized and susceptive to complex redox processes involving CO2 in solids, fluids and melts, elemental carbon, Fe- and Si- carbides, and methane. Here I review the various ways of recycling carbon during subduction and present a spectrum of possible reaction products in the mantle. Metamorphic reactions liberate <20% of the subducted CO2 to the subarc region (Connolly 2005, EPSL). Larger amounts might be mobilized through (sediment) melting. Although the wet pelite solidus is only shifted by 30-50 oC (at 3 GPa) with carbonates, the latter remain stable with melts that are saturated in a H2O+CO2-fluid. Complete dissolution of carbonates requires temperatures above any predicted subduction geotherm. Carbonated sediments yield CO2-rich phonolites to 5 GPa but carbonatites at higher pressures. The silicate melts become increasingly potassic with pressure, while the alkali-rich carbonatites have their highest K/Na at 8 GPa, slightly decreasing to 13 GPa and become sodic with the disappearance of residual cpx at ~16 GPa. What may happen when carbonated pelite derived melts migrate into the mantle is illustrated in Central Italy: in this case, it can be experimentally demonstrated that hybridization of ultrapotassic phonolitic melts with ~2 wt% H2O and ~6 wt% CO2 in the mantle results in the primitive parents of the ultrapotassic kamafugite suites which have ~43 wt% SiO2. Hence, despite a crustal isotopic signature of C, O, and Sr in these rocks, the CO2 of the Italian magmatism does not stem from assimilation in the crust but from melts derived from subducted marine carbonates mixed with pelagic clays and then reacted in the mantle. The migration of CO2-bearing fluids and melts into the mantle may lead to a redox-shock. Where high liquid/mantle ratios prevail, carbonatites rest in their oxidized form and may only freeze in relatively cold lithospheric keels where they form

  10. Recycling of nonmetallics

    USGS Publications Warehouse

    Amey, E.B.; Kelly, T.D.

    1996-01-01

    The first factor determining recyclability is the composition of the material itself. Metals, for example, can be reused with little or no loss in quality. Paper and rubber, by this criterion, are less recyclable. Each time paper is recycled, some cellulose fibers are broken. Shorter fibers can mean weaker paper of perceived lower quality and value. Vulcanizing is an irreversible chemical process that precludes recycling rubber in its original form. Both materials may be reused in other applications often of lower value than the original one. To be recyclable, the discarded material must have a collection infrastructure at the source of waste generation, at a central collection site, or at curbside. The recovered material must also have a market. If it is priced noncompetitively or no market exists, if it does not meet specifications, or if it requires special technology investments which cannot be recovered through future sales, the recovered material may be stockpiled or discarded rather than recycled. ?? 1996 International Association for Mathematical Geology.

  11. On Borders: From Ancient to Postmodern Times

    NASA Astrophysics Data System (ADS)

    Bellezza, G.

    2013-11-01

    The article deals with the evolution of the concept of borders between human groups and with its slow evolution from the initial no men's land zones to the ideal single-dimension linear borders. In ancient times the first borders were natural, such as mountain ranges or large rivers until, with the development of Geodesy, astronomical borders based on meridians and parallels became a favourite natural base. Actually, Modern States adopted these to fix limits in unknown conquered territories. The postmodern thought led give more importance to cultural borders until, in the most recent times, is becoming rather impossible to fix borders in the virtual cyberspace.

  12. Recycling of Reinforced Plastics

    NASA Astrophysics Data System (ADS)

    Adams, R. D.; Collins, Andrew; Cooper, Duncan; Wingfield-Digby, Mark; Watts-Farmer, Archibald; Laurence, Anna; Patel, Kayur; Stevens, Mark; Watkins, Rhodri

    2014-02-01

    This work has shown is that it is possible to recycle continuous and short fibre reinforced thermosetting resins while keeping almost the whole of the original material, both fibres and matrix, within the recyclate. By splitting, crushing hot or cold, and hot forming, it is possible to create a recyclable material, which we designate a Remat, which can then be used to remanufacture other shapes, examples of plates and tubes being demonstrated. Not only can remanufacturing be done, but it has been shown that over 50 % of the original mechanical properties, such as the E modulus, tensile strength, and interlaminar shear strength, can be retained. Four different forms of composite were investigated, a random mat Glass Fibre Reinforced Plastic (GFRP) bathroom component and boat hull, woven glass and carbon fibre cloth impregnated with an epoxy resin, and unidirectional carbon fibre pre-preg. One of the main factors found to affect composite recyclability was the type of resin matrix used in the composite. Thermoset resins tested were shown to have a temperature range around the Glass Transition Temperature (Tg) where they exhibit ductile behaviour, hence aiding reforming of the material. The high-grade carbon fibre prepreg was found to be less easy to recycle than the woven of random fibre laminates. One method of remanufacturing was by heating the Remat to above its glass transition temperature, bending it to shape, and then cooling it. However, unless precautions are taken, the geometric form may revert. This does not happen with the crushed material.

  13. Who owns the recyclables

    SciTech Connect

    Parker, B.

    1994-05-01

    On March 31, the California Supreme Court decided the much awaited Rancho Mirage'' case (Waste Management of the Desert, Inc., and the City of Rancho Mirage v. Palm Springs Recycling Center, Inc.), and held that the California Integrated Waste Management Act of 1989 does not allow an exclusive franchise for the collection of recyclables not discarded by their owner.'' This ends a three-year slugfest between secondary materials processors in the state and municipalities and their franchised garbage haulers who also collect and process recyclables as part of their exclusive arrangement. Central to this nationally-watched litigation is a most fundamental question in waste management: at what point in time do articles in the solid waste stream become actual or potentially valuable secondary materials

  14. Scrap tire recycling

    SciTech Connect

    Lula, J.W.; Bohnert, G.W.

    1997-03-01

    As the automobile tire technology has grown and met the need for safer and more durable tires, stronger reinforcement and more chemically resistant rubber compounds have made recycling tires more difficult. In an effort to resolve this problem, techniques and equipment were developed to grind tires into small pieces, and new markets were sought to utilize the crumb rubber product streams from ground tires. Industrial combustion processes were modified to accept scrap tires as fuel. These efforts have been beneficial, steadily increasing the percentage of scrap tires recycled to about 10% in 1985, and reaching 72% in 1995. By the end of 1997, fully 100% of tires generated in the U.S. are expected to be recycled.

  15. The impact of Border policy effect on cross-border ethnic areas

    NASA Astrophysics Data System (ADS)

    Bie, Q. L.; Zhou, S. Y.; Li, C. S.

    2013-11-01

    Boundary effect analysis is related to border policy making in the cross-border ethnic area. The border effect literatures show that geographic boundaries have obvious impacts on economic, social and cultural relations in both sides of a nation border. Particularly in cross-border ethnic areas, each ethnic group has strong internal spatial structure relevance, and the boundary effect is more obvious. However, most of China's border areas are cross-border ethnic areas, each of border issues is unique. Under this perspective, we analyze the border effects of various boundaries can provide basis for formulating border management policies. For small scale of cross-border ethnic minority areas, how to formulate the boundary management policy is a good question to explore. This paper is demonstrated by a study of the impact of border management policies in Dehong Dai and Jingpo Autonomous Prefecture in Yunnan Province at the border area to Burma. The comparative method is used to analysis the border management policies in past 50 decades for the border area of Yunnan Province .This research aims to define trends within border policy and its influences to national security. This paper also examines Wendy Brown's liberal theory of border management policy. We found that it is not suitable for Sino-Burma border area. The conclusion is that the changes or instability of international economic and political situation has more influence to this cross-border ethnic area, and only innovative policy will be effective in cross-border ethnic area. So the border management policies should reflect the change of international context.

  16. Recycling Decisions and Green Design.

    ERIC Educational Resources Information Center

    Lave, Lester B.; And Others

    1994-01-01

    Explores the facts and perceptions regarding recycling, what can be done to make products more environmentally compatible, and how to think about recycling decisions in a more helpful way. (Contains 39 references.) (MDH)

  17. Cross-border reprogenetic services.

    PubMed

    Couture, V; Drouin, R; Tan, S-L; Moutquin, J-M; Bouffard, C

    2015-01-01

    The purpose of this review is to synthesize the current knowledge on the international movement of patients and biopsied embryo cells for pre-implantation genetic diagnosis and its different applications. Thus far, few attempts have been made to identify the specific nature of this phenomenon called 'cross-border reprogenetic services'. There is scattered evidence, both empirical and speculative, suggesting that these services raise major issues in terms of service provision, risks for patients and the children-to-come, the legal liabilities of physicians, as well as social justice. To compile this evidence, this review uses the narrative overview protocol combined with thematic analysis. Five major themes have emerged from the literature at the conjunction of cross-border treatments and reprogenetics: 'scope', 'scale', 'motivations', 'concerns', and 'governance'. Similar themes have already been observed in the case of other medical tourism activities, but this review highlights their singularity with reprogenetic services. It emphasizes the diagnostic and autologous feature of reprogenetics, the constant risk of misdiagnosis, the restriction on certain tests for medically controversial conditions, and the uncertain accessibility of genetic counseling in cross-border settings. PMID:24798608

  18. Helium-Recycling Plant

    NASA Technical Reports Server (NTRS)

    Cook, Joseph

    1996-01-01

    Proposed system recovers and stores helium gas for reuse. Maintains helium at 99.99-percent purity, preventing water vapor from atmosphere or lubricating oil from pumps from contaminating gas. System takes in gas at nearly constant low back pressure near atmospheric pressure; introduces little or no back pressure into source of helium. Concept also extended to recycling of other gases.

  19. Recycled Insect Models

    ERIC Educational Resources Information Center

    Rule, Audrey C.; Meyer, Mary Ann

    2007-01-01

    This article presents an engaging activity in which high school students use a dichotomous key to guide the creation and classification of model insects from recycled plastic lids and containers. Besides teaching the use of a dichotomous key and the effect of evolutionary descent upon groupings of organisms, this activity focuses on an…

  20. RECYCLABILITY INDEX FOR AUTOMOBILES

    EPA Science Inventory

    The project's purpose is to create a rating system for the ecological impacts of vehicles at the end of their life based on recyclability, toxic material content, and ultimate disposal. Each year, 10-11 million vehicles are retired from service in the United States. The vehi...

  1. Fuels from Recycling Systems

    ERIC Educational Resources Information Center

    Tillman, David A.

    1975-01-01

    Three systems, operating at sufficient scale, produce fuels that may be alternatives to oil and gas. These three recycling systems are: Black Clawson Fiberclaim, Franklin, Ohio; Union Carbide, South Charleston, West Virginia; and Union Electric, St. Louis, Missouri. These produce a wet fuel, a pyrolytic gas, and a dry fuel, respectively. (BT)

  2. Recycling Study Guide.

    ERIC Educational Resources Information Center

    Hallowell, Anne; And Others

    This study guide was designed to help teachers and students understand the problems surrounding solid wastes. It includes an overview of solid waste and recycling, a glossary, suggested activities and a list of resource publications, audiovisual materials and organizations. There are 19 activity suggestions included in this guide designed for use…

  3. The Recycle Team.

    ERIC Educational Resources Information Center

    Scott, Roger; And Others

    This guide provides lessons that enable students to learn how important it is for each of us to take care of the environment by minimizing the problems caused by too much trash. In the 10 lessons included here, students and their families learn how they can be part of the solution by practicing source reduction and by reusing, recycling, and…

  4. Minor Actinides Recycling in PWRs

    SciTech Connect

    Delpech, M.; Golfier, H.; Vasile, A.; Varaine, F.; Boucher, L.; Greneche, D.

    2006-07-01

    Recycling of minor actinides in current and near future PWR is considered as one of the options of the general waste management strategy. This paper presents the analysis of this option both from the core physics and fuel cycle point of view. A first indicator of the efficiency of different neutron spectra for transmutation purposes is the capture to fission cross sections ratio which is less favourable by a factor between 5 to 10 in PWRs compared to fast reactors. Another indicator presented is the production of high ranking isotopes like Curium, Berkelium or Californium in the thermal or epithermal spectrum conditions of PWR cores by successive neutron captures. The impact of the accumulation of this elements on the fabrication process of such PWR fuels strongly penalizes this option. The main constraint on minor actinides loadings in PWR (or fast reactors) fuels are related to their direct impact (or the impact of their transmutation products) on the reactivity coefficients, the reactivity control means and the core kinetics parameters. The main fuel cycle physical parameters like the neutron source, the alpha decay power, the gamma and neutrons dose rate and the criticality aspects are also affected. Recent neutronic calculations based on a reference core of the Evolutionary Pressurized Reactor (EPR), indicates typical maximum values of 1 % loadings. Different fuel design options for minor actinides transmutation purposes in PWRs are presented: UOX and MOX, homogeneous and heterogeneous assemblies. In this later case, Americium loading is concentrated in specific pins of a standard UOX assembly. Recycling of Neptunium in UOX and MOX fuels was also studied to improve the proliferation resistance of the fuel. The impact on the core physics and penalties on Uranium enrichment were underlined in this case. (authors)

  5. 28 CFR 25.56 - Responsibilities of junk yards and salvage yards and auto recyclers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Responsibilities of junk yards and salvage yards and auto recyclers. 25.56 Section 25.56 Judicial Administration DEPARTMENT OF JUSTICE... Responsibilities of junk yards and salvage yards and auto recyclers. (a) By no later than March 31, 2009,...

  6. 28 CFR 25.56 - Responsibilities of junk yards and salvage yards and auto recyclers.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Responsibilities of junk yards and salvage yards and auto recyclers. 25.56 Section 25.56 Judicial Administration DEPARTMENT OF JUSTICE... Responsibilities of junk yards and salvage yards and auto recyclers. (a) By no later than March 31, 2009,...

  7. 28 CFR 25.56 - Responsibilities of junk yards and salvage yards and auto recyclers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Responsibilities of junk yards and salvage yards and auto recyclers. 25.56 Section 25.56 Judicial Administration DEPARTMENT OF JUSTICE... Responsibilities of junk yards and salvage yards and auto recyclers. (a) By no later than March 31, 2009,...

  8. 28 CFR 25.56 - Responsibilities of junk yards and salvage yards and auto recyclers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Responsibilities of junk yards and salvage yards and auto recyclers. 25.56 Section 25.56 Judicial Administration DEPARTMENT OF JUSTICE... Responsibilities of junk yards and salvage yards and auto recyclers. (a) By no later than March 31, 2009,...

  9. Recycling Behavior: A Multidimensional Approach

    ERIC Educational Resources Information Center

    Meneses, Gonzalo Diaz; Palacio, Asuncion Beerli

    2005-01-01

    This work centers on the study of consumer recycling roles to examine the sociodemographic and psychographic profile of the distribution of recycling tasks and roles within the household. With this aim in mind, an empirical work was carried out, the results of which suggest that recycling behavior is multidimensional and comprises the undertaking…

  10. Recycling of the #5 polymer.

    PubMed

    Xanthos, Marino

    2012-08-10

    Polypropylene (PP) is a widely used plastic with consumer applications ranging from food packaging to automotive parts, including car battery casings. To differentiate it from other recyclable plastics, it is designated as #5. Here, the factors contributing to PP recycling rates are briefly reviewed. Considerations include collection and separation efficiency, processing chemistry, and market dynamics for the products derived from recyclates. PMID:22879510

  11. Border Enforcement and Return Migration by Documented and Undocumented Mexicans

    PubMed Central

    Massey, Douglas S.; Durand, Jorge; Pren, Karen A.

    2014-01-01

    Using data from the Mexican Migration Project we compute probabilities of departure and return for first and later trips to the United States in both documented and undocumented status. We then estimate statistical models to analyze the determinants of departure and return according to legal status. Prior to 1986, Mexico-U.S. migration was characterized by great circularity, but since then circularity has declined markedly for undocumented migrants but increased dramatically for documented migrants. Whereas return migration by undocumented migrants dropped in response to the massive increase in border enforcement, that of documented migrants did not. At present, the Mexico-U.S. migration system has reached a new equilibrium in which undocumented migrants are caged in as long term settlers in the United States while documented migrants increasingly range freely and circulate back and forth across the border within rising frequency. PMID:26273210

  12. COPPER CABLE RECYCLING TECHNOLOGY

    SciTech Connect

    Chelsea Hubbard

    2001-05-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D&D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D&D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D&D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D&D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness of separating

  13. A model for international border management systems.

    SciTech Connect

    Duggan, Ruth Ann

    2008-09-01

    To effectively manage the security or control of its borders, a country must understand its border management activities as a system. Using its systems engineering and security foundations as a Department of Energy National Security Laboratory, Sandia National Laboratories has developed such an approach to modeling and analyzing border management systems. This paper describes the basic model and its elements developed under Laboratory Directed Research and Development project 08-684.

  14. Municipal solid waste recycling issues

    SciTech Connect

    Lave, L.B.; Hendrickson, C.T.; Conway-Schempf, N.M.; McMichael, F.C.

    1999-10-01

    Municipal solid waste (MSW) recycling targets have been set nationally and in many states. Unfortunately, the definitions of recycling, rates of recycling, and the appropriate components of MSW vary. MSW recycling has been found to be costly for most municipalities compared to landfill disposal. MSW recycling policy should be determined by the cost to the community and to society more generally. In particular, recycling is a good policy only if environmental impacts and the resources used to collect, sort, and recycle a material are less than the environmental impacts and resources needed to provide equivalent virgin material plus the resources needed to dispose of the postconsumer material safely. From a review of the existing economic experience with recycling and an analysis of the environmental benefits (including estimation of external social costs), the authors find that, for most communities, curbside recycling is only justifiable for some postconsumer waste, such as aluminum and other metals. They argue that alternatives to curbside recycling collection should be explored, including product takeback for products with a toxic content (such as batteries) or product redesign to permit more effective product remanufacture.

  15. Understanding recycling behavior in Kentucky: Who recycles and why

    NASA Astrophysics Data System (ADS)

    Morgan, Fred W.; Hughes, Margaret V.

    2006-08-01

    Recycling behavior and the motivations behind recycling are being analyzed in a collaborative study between the Sloan Industry Center for a Sustainable Aluminum Industry, the Center for Aluminum Technology, Secat, and the Gatton College of Business and Economics at the University of Kentucky in Lexington. The goals of this study are to determine why people recycle and to find ways to motivate people to recycle more, using Fayette County, Kentucky, as a sample study. It is hoped that the information gathered through educational and motivational efforts in this county can be used on a larger scale in communities throughout the United States.

  16. Why recycle? A comparison of recycling motivations in four communities

    NASA Astrophysics Data System (ADS)

    Vining, Joanne; Linn, Nancy; Burdge, Rabel J.

    1992-11-01

    Four Illinois communities with different sociode-mographic compositions and at various stages of planning for solid waste management were surveyed to determine the influence of sociodemographic variables and planning stages on the factors that motivate recycling behavior. A factor analysis of importance ratings of reasons for recycling and for not recycling yielded five factors interpreted as altruism, personal inconvenience, social influences, economic incentives, and household storage. The four communities were shown to be significantly different in multivariate analyses of the five motivational factors. However, attempts to explain these community differences with regression analyses, which predicted the motivational factors with dummy codes for planning stages, a measure of self-reported recycling behavior, and sociodemographic measures were unsatisfactory. Contrary to expectation, the solid waste management planning stages of the cities (curbside pickup, recycling dropoff center, and planning in progress) contributed only very slightly to the prediction of motivational factors for recycling. Community differences were better explained by different underlying motivational structures among the four communities. Altruistic reasons for recycling (e.g., conserving resources) composed the only factor which was similar across the four communities. This factor was also perceived to be the most important reason for recycling by respondents from all four communities. The results of the study supported the notion that convenient, voluntary recycling programs that rely on environmental concern and conscience for motivation are useful approaches to reducing waste.

  17. The Armchair at the Borders: The "Messy" Ideas of Borders and Border Epistemologies within Multicultural Science Education Scholarship

    ERIC Educational Resources Information Center

    Carter, Lyn

    2010-01-01

    This paper aims to further articulate multicultural science education scholarship. In particular, it explores the notions of borders and border epistemologies as intellectual resources to think again about the challenges of science education in the global world that demand more sophisticated concepts to unravel some of its complexities. It…

  18. Lateral orientation (image)

    MedlinePlus

    A lateral orientation is a position away from the midline of the body. For instance, the arms are lateral to the ... ears are lateral to the head. A medial orientation is a position toward the midline of the ...

  19. International Issues, High-Stakes Testing, and Border Pedagogy: Social Studies at Border High School

    ERIC Educational Resources Information Center

    Cashman, Timothy G.; McDermott, Benjamin R.

    2013-01-01

    A recently constructed border wall stands within walking distance of Border High School (BHS) and was created to impede the flow of people, goods, fauna, and contraband from Mexico into the United States (U.S.). The reality, however, is that this geopolitical border is fluid, allowing connections between sociopolitical zones. The researchers…

  20. Emulsified industrial oils recycling

    SciTech Connect

    Gabris, T.

    1982-04-01

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  1. A rare cause of lateral facial swelling.

    PubMed

    Mohanty, Sujata; Gulati, Ujjwal; Vandana; Singh, Sapna

    2014-01-01

    A case of chronic, recurrent and asymptomatic facial swelling in a young male is presented. Swelling extended from lower midface to upper lateral neck and right commissure to anterior massetric border. History, clinical signs and symptoms and examination pointed towards the benign nature of the swelling. Fine-needle aspiration cytology tapered the diagnostic possibilities to a salivary cyst or pseudocyst. Ultrasonography identified the lesion to contain echogenic fluid with irregular borders. "Tail sign" was absent on contrast magnetic resonance imaging, excluding the involvement of the sublingual gland. Surgical excision of the lesion was done along with submandibular gland as both were in continuity via a bottle-neck tract. Final histopathological diagnosis was that of the submandibular gland extravasation phenomenon. As per the best of our knowledge, it is the first case report of a submandibular gland extravasation causing swelling in a retrograde direction onto the face. PMID:25593883

  2. Recycler barrier RF buckets

    SciTech Connect

    Bhat, C.M.; /Fermilab

    2011-03-01

    The Recycler Ring at Fermilab uses a barrier rf systems for all of its rf manipulations. In this paper, I will give an overview of historical perspective on barrier rf system, the longitudinal beam dynamics issues, aspects of rf linearization to produce long flat bunches and methods used for emittance measurements of the beam in the RR barrier rf buckets. Current rf manipulation schemes used for antiproton beam stacking and longitudinal momentum mining of the RR beam for the Tevatron collider operation are explained along with their importance in spectacular success of the Tevatron luminosity performance.

  3. PFC concentration and recycle

    SciTech Connect

    Tom, G.M.; McManus, J.; Knolle, W.; Stoll, I.

    1994-12-31

    The semiconductor industry uses PFC gases such as CF{sub 4} and C{sub 2}F{sub 6} as etchant and cleaning gases during plasma processes. The gases do not fully react within the reactor chamber. The unused gases enter the atmosphere through the process effluent. These gases have long persistence in the atmosphere and absorb infrared radiation. The PFC gases are, therefore, potential global warming gases. A method is described that will recover and recycle PFC gases. The method that the authors have employed to trap and concentrate the PFC gases is based on a dual bed adsorber. The adsorption material is activated carbon.

  4. Recycled rubber roads

    SciTech Connect

    Not Available

    1989-02-01

    The paper describes several innovative approaches for recycling old tires in the construction of roads. In one, 18 inches of shredded tire chips (2 X 2 inches) were used on top of 6-8 inches of small stone to construct a road across a sanitary landfill. No compacting or linders were needed. In another application, sidewall mats linked together with steel strapping were used as a sub-base for a road across a swampy area. A third application uses 1/2 inch bits of groundup rubber tires as a replacement for aggregate in an asphalt road base.

  5. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Border ports. 14.16 Section 14.16 Wildlife..., EXPORTATION, AND TRANSPORTATION OF WILDLIFE Importation and Exportation at Designated Ports § 14.16 Border ports. (a) Except for wildlife requiring a permit pursuant to part 16, 17, 18, 21, or 23 of...

  6. Researching Transfronterizo Literacies in Texas Border Colonias

    ERIC Educational Resources Information Center

    Smith, Patrick H.; Murillo, Luz A.

    2012-01-01

    This study examines literacies practiced in bilingual households located in emerging communities along the Texas-Mexico border known as border colonias. Drawing on theoretical notions of space as geographic and temporal, the simultaneity of global and local forces at work in colonias, and expressions of agency that are "in between" accommodation…

  7. Teaching Orthodox Religious Education on the Border

    ERIC Educational Resources Information Center

    Berglund, Jenny

    2014-01-01

    In geographical areas bordering those of other states, the function of educational systems, as the means for states to foster their citizens, is challenged by ambiguities and tensions connected to intercultural experiences. In this article, I illustrate some of the findings from a project that studies religious education in four border areas…

  8. Binational Border Collaboration in Teacher Education.

    ERIC Educational Resources Information Center

    Hampton, Elaine; Liguori, Olga; Rippberger, Susan

    2003-01-01

    Describes an educational collaboration at the University of Texas El Paso designed to increase the U.S. border community's understanding of their Mexican school counterparts. This small teacher border exchange program grew into a laboratory for learning and teaching multicultural education through binational community-based experience. Research…

  9. Border Pedagogy Cafes: Grassroots Conversations that Matter

    ERIC Educational Resources Information Center

    Necochea, Juan; Cline, Zulmara

    2008-01-01

    This exploratory study uses qualitative methods to analyze the impact of conversations in the Border Pedagogy "Cafes" on more than 500 binational educators from the Tijuana/San Diego area on the U.S.-Mexico border. Four important themes emerged from the analysis that describe the impact of the cafes and offer a strong foundation on which to build…

  10. Behaviour of Recycled Coarse Aggregate Concrete: Age and Successive Recycling

    NASA Astrophysics Data System (ADS)

    Sahoo, Kirtikanta; Pathappilly, Robin Davis; Sarkar, Pradip

    2016-05-01

    Recycled Coarse Aggregate (RCA) concrete construction technique can be called as `green concrete', as it minimizes the environmental hazard of the concrete waste disposal. Indian standard recommends target mean compressive strength of the conventional concrete in terms of water cement ratio (w/c). The present work is an attempt to study the behaviour of RCA concrete from two samples of parent concrete having different age group with regard to the relationship of compressive strength with water cement ratios. Number of recycling may influence the mechanical properties of RCA concrete. The influence of age and successive recycling on the properties such as capillary water absorption, drying shrinkage strain, air content, flexural strength and tensile splitting strength of the RCA concrete are examined. The relationship between compressive strength at different w/c ratios obtained experimentally is investigated for the two parameters such as age of parent concrete and successive recycling. The recycled concrete using older recycled aggregate shows poor quality. While the compressive strength reduces with successive recycling gradually, the capillary water absorption increases abruptly, which leads to the conclusion that further recycling may not be advisable.

  11. Behaviour of Recycled Coarse Aggregate Concrete: Age and Successive Recycling

    NASA Astrophysics Data System (ADS)

    Sahoo, Kirtikanta; Pathappilly, Robin Davis; Sarkar, Pradip

    2016-06-01

    Recycled Coarse Aggregate (RCA) concrete construction technique can be called as `green concrete', as it minimizes the environmental hazard of the concrete waste disposal. Indian standard recommends target mean compressive strength of the conventional concrete in terms of water cement ratio ( w/ c). The present work is an attempt to study the behaviour of RCA concrete from two samples of parent concrete having different age group with regard to the relationship of compressive strength with water cement ratios. Number of recycling may influence the mechanical properties of RCA concrete. The influence of age and successive recycling on the properties such as capillary water absorption, drying shrinkage strain, air content, flexural strength and tensile splitting strength of the RCA concrete are examined. The relationship between compressive strength at different w/ c ratios obtained experimentally is investigated for the two parameters such as age of parent concrete and successive recycling. The recycled concrete using older recycled aggregate shows poor quality. While the compressive strength reduces with successive recycling gradually, the capillary water absorption increases abruptly, which leads to the conclusion that further recycling may not be advisable.

  12. Alcohol abuse and dependence among U.S.-Mexico border and non-border Mexican Americans

    PubMed Central

    Caetano, Raul; Caetano Vaeth, Patrice A.; Mills, Britain A.; Rodriguez, Lori A.

    2012-01-01

    BACKGROUND This paper examines the prevalence, the symptom profile, and the drinking and sociodemographic predictors of current (past 12 month) DSM-IV alcohol abuse and dependence among Mexican Americans living along the U.S.-Mexico border and those living in metropolitan areas away from the border. METHODS Respondents in the non-border areas (primarily Houston and Los Angeles) constitute a multistage probability sample (N=1,288) of these areas, interviewed as part of the 2006 Hispanic Americans Baseline Alcohol Survey (HABLAS). Respondents in the border area (N=1,307) constitute a household probability sample of Mexican Americans living on the border. In both surveys, data were collected during computer assisted interviews conducted in respondents’ homes. The HABLAS and the border sample response rates were 76% and 67%, respectively. RESULTS Although bivariate analyses revealed no overall differences between border and non-border locations, (negative) age trends were more pronounced on the border for male abuse and for dependence among both genders. Among females aged 18–29, border residence was linked to significantly higher rates of dependence. In multivariable analyses, the prevalence of male abuse declined more rapidly with age on the border than off the border. Other unique predictors of male abuse were Jewish/other religion and weekly volume of alcohol consumption. Being married or out of the workforce, attaining a higher education, no religious preference, and weekly volume uniquely predicted female dependence. Age and weekly volume uniquely predicted male dependence. CONCLUSIONS The prevalence of alcohol use disorders among Mexican Americans on and off the U.S.-Mexico border largely mirrors previously documented patterns of alcohol consumption in these areas. For young Mexican-American women in particular, border residence is linked to heightened vulnerability to alcohol dependence. PMID:23278433

  13. TOMATO CLEANING AND WATER RECYCLE

    EPA Science Inventory

    A full-scale dump tank water recycle system was developed and demonstrated. A false bottom-ejector transport system removed soil from the water. Clarified water was either recycled back to the dump tank or discharged to the sewer. A vacuum belt was developed for dewatering the mu...

  14. Garbage project on recycling behavior

    SciTech Connect

    McGuire, R.H.; Hughes, W.W.; Rathje, W.L.

    1982-02-01

    Results are presented of a study undertaken to determine the factors which are most effective in motivating different socio-economic groups to change their recycling behaviors and participate in recycling programs. Four types of data were collected and analyzed in Tucson: (1) purchase data from local recyclers, (2) traditional interview-survey data on recycling behavior, (3) long-term and short-term household refuse data, and (4) combined interview-garbage data. Findings reveal that disposal patterns for newspapers and aluminum cans are tuse data, and (4) combined interview-garbage data. Findings reveal that disposal patterns for newspapers and aluminum cans are the same across census tracts with significantly different socio-economic characteristics. Further, analysis of interview and garbage data matched by household reaffirm that what people say about recycling and how they dispose of recyclable materials are two different things. Thus, interview reports of newspaper recycling correlate with higher income informants, but their interview reports do not correlate with what is thrown into their garbage cans. Money is concluded to be the most powerful incentive toward recycling.

  15. The Dynamic Earth: Recycling Naturally!

    ERIC Educational Resources Information Center

    Goldston, M. Jenice; Allison, Elizabeth; Fowler, Lisa; Glaze, Amanda

    2013-01-01

    This article begins with a thought-provoking question: What do you think of when you hear the term "recycle?" Many think about paper, glass, aluminum cans, landfills, and reducing waste by reusing some of these materials. How many of us ever consider the way the systems of Earth dynamically recycle its materials? In the following…

  16. Information Sources on Rural Recycling.

    ERIC Educational Resources Information Center

    Notess, Greg; Kuske, Jodee

    1992-01-01

    Provides resources for rural recycling operations with the principle aim of assisting rural government officials, planners, residents, and educators to encourage recycling as an integral part of an individual's or community's solid waste management plan. Sources range from bibliographies, directories, and government documents to case studies. (49…

  17. American Art of Conspicuous Recycling.

    ERIC Educational Resources Information Center

    Gomez, Aurelia

    1999-01-01

    Characterizes the use of recycling "junk" as a means for creating art by exploring various recycling traditions that are present in the United States. Demonstrates to students that "junk" can be fashioned into beautiful works of art. Offers four works of art and provides discussion questions and project ideas for each artwork. (CMK)

  18. Recycling Study Guide [Resource Packet].

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Natural Resources, Madison.

    This resource packet contains six documents developed by the Wisconsin Department of Natural Resources in order to help teachers infuse the environmental education topics of recycling and solid waste into social studies, art, English, health, mathematics, science, and environmental education classes. "Recycling Study Guide" contains 19 activities…

  19. Recycling Solid Waste in Chattanooga

    ERIC Educational Resources Information Center

    Vredeveld, Ruth; Martin, Robin

    1973-01-01

    Students undertook a group project in collaboration with city officials to study garbage types in the community and possibilities of recycling solid wastes. Data collected from various sources revealed that public attitude was favorable for recycling efforts and that it was feasible economically. (PS)

  20. Training Governments to Buy Recycled.

    ERIC Educational Resources Information Center

    Keller, Richard

    1995-01-01

    Describes a program developed by the Northeast Maryland Waste Disposal Authority to teach government buyers how to buy recycled materials. The program consists of a hands-on training seminar and a manual that offers step-by-step instructions for setting up a buy-recycled purchasing program. (LZ)

  1. Abortion checks at German-Dutch border.

    PubMed

    Von Baross, J

    1991-05-01

    The commentary on West German abortion law, particularly in illegal abortion in the Netherlands, finds the law restrictive and in violation of the dignity and rights of women. The Max-Planck Institute in 1990 published a study that found that a main point of prosecution between 1976 and 1986, as reported by Der Spiegal, was in border crossings from the Netherlands. It is estimated that 10,000 annually have abortions abroad, and 6,000 to 7,000 in the Netherlands. The procedure was for an official to stop a young person and query about drugs; later the woman would admit to an abortion, and be forced into a medical examination. The German Penal Code Section 218 stipulates abortion only for certain reasons testified to by a doctor other than the one performing the abortion. Counseling on available social assistance must be completed 3 days prior to the abortion. Many counseling offices are church related and opposed to abortions. Many doctors refuse legally to certify, and access to abortion is limited. The required hospital stay is 3-4 nights with no day care facilities. Penal Code Section 5 No. 9 allows prosecution for uncounseled illegal abortion. Abortion law reform is anticipated by the end of 1992 in the Bundestag due to the Treaty or the Unification of Germany. The Treaty states that the rights of the unborn child must be protected and that pregnant women relieve their distress in a way compatible with the Constitution, but improved over legal regulations from either West or East Germany, which permits abortion on request within 12 weeks of conception without counseling. It is hoped that the law will be liberalized and Penal Code Section 5 No. 9 will be abolished. PMID:12343177

  2. Transnational connections of later-life migrants.

    PubMed

    Heikkinen, Sari Johanna; Lumme-Sandt, Kirsi

    2013-04-01

    In this paper a transnational perspective is used to explain whether and how older migrants construct and sustain their social networks. The paper uses a transnational viewpoint on older migrants' lives by analysing their engagement with their former homeland, and the intensity and habitualness of those engagements in old age. The aim of this article is to study the transnational connections of later-life migrants'. Attention is especially paid to the features of old age while maintaining these connections. These considerations are based on analyses of transnational networks in the everyday lives of later-life migrants from the former Soviet Union residing in Finland. The data were collected from 11 later-life migrants. It is found that transnational relationships are a vital part of the everyday lives of older migrants, and that they are sustained in varied ways. These connections mean a concrete source of help, family affiliations, the sharing of emotions, and a larger social network. Economic limitations affect the frequency and type of communication, and various physical limitations may also cause inability to maintain contacts across borders. In these circumstances, family members or other close relatives or friends are needed to deliver messages on the older person's behalf. Old age and immigration status affect the amount and direction of communication across borders, thereby shaping these networks. PMID:23561285

  3. Is recycling worth the trouble

    SciTech Connect

    Boltz, C.M.

    1995-03-01

    A panel of waste industry experts met recently at a Washington, DC, conference to discuss and debate the costs, benefits, and economics of recycling solid waste. The nearly unanimous conclusion from some of the speakers--that recycling, as it is implemented today, has costs that far outweigh its benefits--is evidence of a growing backlash among solid waste officials against a recycling movement they feel has been grossly over-inflated by environmental groups as a solution to a non-existent problem known as the garbage crisis. The public should not place such a strong emphasis on recycling as a cure-all for environmental problems, according to the panel of four waste management policy analysts at The State of Garbage'' session held in mid-January at the 1995 US/Canadian Federation Solid Waste Management Conference. Moreover, some panel members said, recycling should take place only if it makes economic sense.

  4. Combustion Byproducts Recycling Consortium

    SciTech Connect

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, 'clean coal' combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered 'allowable' under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and private-sector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

  5. Combustion Byproducts Recycling Consortium

    SciTech Connect

    Ziemkiewicz, Paul; Vandivort, Tamara; Pflughoeft-Hassett, Debra; Chugh, Y Paul; Hower, James

    2008-08-31

    Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, “clean coal” combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered “allowable” under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and privatesector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

  6. Semantic Borders and Incomplete Understanding.

    PubMed

    Silva-Filho, Waldomiro J; Dazzani, Maria Virgínia

    2016-03-01

    In this article, we explore a fundamental issue of Cultural Psychology, that is our "capacity to make meaning", by investigating a thesis from contemporary philosophical semantics, namely, that there is a decisive relationship between language and rationality. Many philosophers think that for a person to be described as a rational agent he must understand the semantic content and meaning of the words he uses to express his intentional mental states, e.g., his beliefs and thoughts. Our argument seeks to investigate the thesis developed by Tyler Burge, according to which our mastery or understanding of the semantic content of the terms which form our beliefs and thoughts is an "incomplete understanding". To do this, we discuss, on the one hand, the general lines of anti-individualism or semantic externalism and, on the other, criticisms of the Burgean notion of incomplete understanding - one radical and the other moderate. We defend our understanding that the content of our beliefs must be described in the light of the limits and natural contingencies of our cognitive capacities and the normative nature of our rationality. At heart, anti-individualism leads us to think about the fact that we are social creatures, living in contingent situations, with important, but limited, cognitive capacities, and that we receive the main, and most important, portion of our knowledge simply from what others tell us. Finally, we conclude that this discussion may contribute to the current debate about the notion of borders. PMID:26111737

  7. Rivers as Political Boundaries: Peru and its Dynamic Borders

    NASA Astrophysics Data System (ADS)

    Abad, J. D.; Escobar, C.; Garcia, A. M. P.; Ortals, C.; Frias, C. E.; Vizcarra, J.

    2014-12-01

    Rivers, although inherently dynamic, have been chosen as political boundaries since the beginning of colonization for several reasons. Such divisions were chosen namely for their defensive capabilities and military benefits, and because they were often the first features mapped out by explorers. Furthermore, rivers were indisputable boundaries that did not require boundary pillars or people to guard them. However, it is important to understand the complexities of a river as a boundary. All rivers inevitably change over time through processes such as accretion, deposition, cut-off, or avulsion, rendering a political boundary subject to dispute. Depending upon the flow, size, and surrounding land, a river will migrate differently than others. As these natural features migrate one country loses land while another gains land leading to tension between legal rigidity and fluid dynamism. This in turn can manifest in social disruption due to cultural differences, political upheaval, or conflict risk as a result of scarce water resources. The purpose of this research is to assess the temporal and spatial variability of the political boundaries of Peru that follow rivers. Peru shares borders with Colombia, Brazil, Bolivia, Chile, and Ecuador. A large part of its northern border with Colombia follows the Putumayo River and later the Amazon River. Part of its eastern border with Brazil follows the Yavari River and later the Yaquirana River. These rivers are natural features used as political boundaries yet they differ in how each migrates. By means of a spatial and temporal analysis of satellite images it was possible to obtain erosion and deposition areas for the Putumayo River, the portion of the Amazon River that is part of the Peruvian boundary, the Yavari River, and the Yaquirana River. The erosion and deposition areas were related to land distribution among Peru, Colombia, and Brazil. By examining the Digital Elevation Model one can see how the altitude of the

  8. Plastics recycling: challenges and opportunities

    PubMed Central

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-01-01

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  9. Plastics recycling: challenges and opportunities.

    PubMed

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-07-27

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  10. The U.S.-Mexico Border Infectious Disease Surveillance Project: Establishing Binational Border Surveillance

    PubMed Central

    Waterman, Stephen; Lucas, Carlos Alvarez; Falcon, Veronica Carrion; Morales, Pablo Kuri; Lopez, Luis Anaya; Peter, Chris; Gutiérrez, Alejandro Escobar; Gonzalez, Ernesto Ramirez; Flisser, Ana; Bryan, Ralph; Valle, Enrique Navarro; Rodriguez, Alfonso; Hernandez, Gerardo Alvarez; Rosales, Cecilia; Ortiz, Javier Arias; Landen, Michael; Vilchis, Hugo; Rawlings, Julie; Leal, Francisco Lopez; Ortega, Luis; Flagg, Elaine; Conyer, Roberto Tapia; Cetron, Martin

    2003-01-01

    In 1997, the Centers for Disease Control and Prevention, the Mexican Secretariat of Health, and border health officials began the development of the Border Infectious Disease Surveillance (BIDS) project, a surveillance system for infectious diseases along the U.S.-Mexico border. During a 3-year period, a binational team implemented an active, sentinel surveillance system for hepatitis and febrile exanthems at 13 clinical sites. The network developed surveillance protocols, trained nine surveillance coordinators, established serologic testing at four Mexican border laboratories, and created agreements for data sharing and notification of selected diseases and outbreaks. BIDS facilitated investigations of dengue fever in Texas-Tamaulipas and measles in California–Baja California. BIDS demonstrates that a binational effort with local, state, and federal participation can create a regional surveillance system that crosses an international border. Reducing administrative, infrastructure, and political barriers to cross-border public health collaboration will enhance the effectiveness of disease prevention projects such as BIDS. PMID:12533288

  11. Coal liquefaction with preasphaltene recycle

    DOEpatents

    Weimer, Robert F.; Miller, Robert N.

    1986-01-01

    A coal liquefaction system is disclosed with a novel preasphaltene recycle from a supercritical extraction unit to the slurry mix tank wherein the recycle stream contains at least 90% preasphaltenes (benzene insoluble, pyridine soluble organics) with other residual materials such as unconverted coal and ash. This subject process results in the production of asphaltene materials which can be subjected to hydrotreating to acquire a substitute for No. 6 fuel oil. The preasphaltene-predominant recycle reduces the hydrogen consumption for a process where asphaltene material is being sought.

  12. Recycling and Life Cycle Issues

    SciTech Connect

    Das, Sujit

    2010-01-01

    This chapter addresses recycling and life cycle considerations related to the growing use of lightweight materials in vehicles. The chapter first addresses the benefit of a life cycle perspective in materials choice, and the role that recycling plays in reducing energy inputs and environmental impacts in a vehicle s life cycle. Some limitations of life cycle analysis and results of several vehicle- and fleet-level assessments are drawn from published studies. With emphasis on lightweight materials such as aluminum, magnesium, and polymer composites, the status of the existing recycling infrastructure and technological challenges being faced by the industry also are discussed.

  13. Accessory lateral discoid meniscus.

    PubMed

    Saygi, Baransel; Yildirim, Yakup; Senturk, Salih; Sezgin Ramadan, Saime; Gundes, Hakan

    2006-12-01

    The lateral meniscus tends to have more developmental variation than the medial counterpart. This is a report of an accessory discoid layer of lateral meniscus. All arthroscopic, magnetic resonance imaging and histopathological views are presented. PMID:16710729

  14. Amyotrophic lateral sclerosis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000688.htm Amyotrophic lateral sclerosis To use the sharing features on this page, please enable JavaScript. Amyotrophic lateral sclerosis, or ALS, is a disease of the nerve ...

  15. Progress reported in PET recycling

    SciTech Connect

    Not Available

    1989-06-01

    The Goodyear Polyester Division has demonstrated its ability to break down polyethylene terephthalate (PET) from recycled plastic soft drink bottles and remanufacture the material into PET suitable for containers. Most people are familiar with PET in the form of lightweight, shatter resistant beverage bottles. About 20 percent of these beverage containers currently are being recycled. The recycled PET is currently used in many applications such as carpeting, pillow stuffing, sleeping bag filling, insulation for water heaters and non-food containers. This is the first step of Goodyear's increased efforts to recycle PET from containers into a material suitable for food packing. The project is extremely complex, involving sophisticated understanding of the chemical reactions involved, PET production and the technology testing protocols necessary to design a process that addresses all the technical, safety, and regulatory concerns. The research conducted so far indicated that additional processing beyond simply cleaning the shredded material, called flake, will be required to assure a quality polymer.

  16. New approaches to recycling tires

    SciTech Connect

    Spencer, R.

    1991-03-01

    Steel-belted radial tires are potentially one of the most recyclable products created by modern industry, although the potential has been barely tapped. Discarded tires pile up at an astonishing rate each year - 234 million in the US and 26 million passenger tire equivalents in Canada. They represent a mother lode of raw material waiting for modern day miners to transform them into recycled rubber, steel, fiber and energy. The tremendous increase in use of steel belted radials since the early 1970s has complicated their recyclability compared to the bias ply tire, but it has also accomplished waste reduction by tripling tire service life. Part one of this report describes processes being developed to convert tires to crumb rubber, as well as some potential uses of recycled rubber. Part two, to appear next month, will examine such uses as rubberized athletic tracks and highway asphalt.

  17. Operating A Recycling Program: A Citizen's Guide.

    ERIC Educational Resources Information Center

    Mulligan, Kevin; Powell, Jerry

    Presented are recycling program alternatives, procedures for handling and marketing recyclable materials, and suggestions for financing and publicizing a recycling operation. This publication offers a general overview of the possibilities and potential pitfalls of recycling efforts, thereby serving as a catalyst and guide for organizations wishing…

  18. You're a "What"? Recycling Coordinator

    ERIC Educational Resources Information Center

    Torpey, Elka Maria

    2011-01-01

    Recycling coordinators supervise curbside and dropoff recycling programs for municipal governments or private firms. Today, recycling is mandatory in many communities. And advancements in collection and processing methods have helped to increase the quantity of materials for which the recycling coordinator is responsible. In some communities,…

  19. The Three Rs: Reduce, Reuse, Recycle.

    ERIC Educational Resources Information Center

    Science Activities, 1991

    1991-01-01

    A student hand-out for a recycling unit defines the terms reduce, recycle, and reuse as they relate to solid waste management. Presents the characteristics of recyclable items such as yard wastes, metals, glass, and paper. Lists organizations through which more information about recycling can be obtained. (MCO)

  20. Lateral flow strip assay

    SciTech Connect

    Miles, Robin R.; Benett, William J.; Coleman, Matthew A.; Pearson, Francesca S.; Nasarabadi, Shanavaz L.

    2011-03-08

    A lateral flow strip assay apparatus comprising a housing; a lateral flow strip in the housing, the lateral flow strip having a receiving portion; a sample collection unit; and a reagent reservoir. Saliva and/or buccal cells are collected from an individual using the sample collection unit. The sample collection unit is immersed in the reagent reservoir. The tip of the lateral flow strip is immersed in the reservoir and the reagent/sample mixture wicks up into the lateral flow strip to perform the assay.

  1. 75 FR 41842 - Northern Border Pipeline Company; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-19

    ... Energy Regulatory Commission Northern Border Pipeline Company; Notice of Application July 12, 2010. Take notice that on July 2, 2010, Northern Border Pipeline Company (Northern Border), 717 Texas Street... Northern Border's mainline system in Bureau County, Illinois, to a point of interconnection with...

  2. Corporate America urges consumers to buy recycled

    SciTech Connect

    Rabasca, L.

    1995-04-01

    The National Recycling Coalition`s (NRC, Washington, DC) buy Recycled Business Alliance (BRBA), the US EPA`s WasteWi$e program, and the US Conference of Mayors` (Washington, DC) buy-recycled program are just a few of the national groups that have formed since 1990 to encourage the purchase of products made from recyclables. Indeed, corporate America and governments are buying recycled. More than $1 billion worth of recycled-content products have been bought by McDonald`s Corp. since 1990. The nearly 950 members of the BRBA reported spending $9.1 billion on recycled-content products in 1993. State governments reported in 1993 that they had spent more than $600 million on recycled products. Several states, cities, and counties have adopted buy-recycled executive orders. Now, many of these companies and government officials are urging consumers to use their own purchasing power to spur markets for recyclables.

  3. Migratory neuronal progenitors arise from the neural plate borders in tunicates.

    PubMed

    Stolfi, Alberto; Ryan, Kerrianne; Meinertzhagen, Ian A; Christiaen, Lionel

    2015-11-19

    The neural crest is an evolutionary novelty that fostered the emergence of vertebrate anatomical innovations such as the cranium and jaws. During embryonic development, multipotent neural crest cells are specified at the lateral borders of the neural plate before delaminating, migrating and differentiating into various cell types. In invertebrate chordates (cephalochordates and tunicates), neural plate border cells express conserved factors such as Msx, Snail and Pax3/7 and generate melanin-containing pigment cells, a derivative of the neural crest in vertebrates. However, invertebrate neural plate border cells have not been shown to generate homologues of other neural crest derivatives. Thus, proposed models of neural crest evolution postulate vertebrate-specific elaborations on an ancestral neural plate border program, through acquisition of migratory capabilities and the potential to generate several cell types. Here we show that a particular neuronal cell type in the tadpole larva of the tunicate Ciona intestinalis, the bipolar tail neuron, shares a set of features with neural-crest-derived spinal ganglia neurons in vertebrates. Bipolar tail neuron precursors derive from caudal neural plate border cells, delaminate and migrate along the paraxial mesoderm on either side of the neural tube, eventually differentiating into afferent neurons that form synaptic contacts with both epidermal sensory cells and motor neurons. We propose that the neural plate borders of the chordate ancestor already produced migratory peripheral neurons and pigment cells, and that the neural crest evolved through the acquisition of a multipotent progenitor regulatory state upstream of multiple, pre-existing neural plate border cell differentiation programs. PMID:26524532

  4. Migratory neuronal progenitors arise from the neural plate borders in tunicates

    PubMed Central

    Stolfi, Alberto; Ryan, Kerrianne; Meinertzhagen, Ian A.; Christiaen, Lionel

    2015-01-01

    The neural crest is an evolutionary novelty that fostered the emergence of vertebrate anatomical innovations such as the cranium and jaws1. During embryonic development, multipotent neural crest cells are specified at the lateral borders of the neural plate before delaminating, migrating, and differentiating into various cell types. In invertebrate chordates (cephalochordates and tunicates), neural plate border cells express conserved factors such as Msx, Snail, and Pax3/7 and generate melanin-containing pigment cells2-4, a derivative of the neural crest in vertebrates. However, invertebrate neural plate border cells have not been shown to generate homologues of other neural crest derivatives. Thus, proposed models of neural crest evolution postulate vertebrate-specific elaborations on an ancestral neural plate border program, through acquisition of migratory capabilities and the potential to generate multiple cell types5-7. Here we show that a particular neuronal cell type in the tadpole larva of the tunicate Ciona intestinalis, the bipolar tail neuron, shares a set of features with neural crest-derived spinal ganglia neurons in vertebrates. Bipolar tail neuron precursors derive from caudal neural plate border cells, delaminate, and migrate along the paraxial mesoderm on either side of the neural tube, eventually differentiating into afferent neurons that form synaptic contacts with both epidermal sensory cells and motor neurons. We propose that the neural plate borders of the chordate ancestor already produced migratory peripheral neurons and pigment cells, and that the neural crest evolved through the acquisition of a multipotent progenitor regulatory state upstream of multiple, pre-existing neural plate border cell differentiation programs. PMID:26524532

  5. Rethinking Recycling in Arcs

    NASA Astrophysics Data System (ADS)

    Kelemen, P.; Behn, M. D.; Jagoutz, O.

    2012-12-01

    Hacker et al EPSL 2011 and Behn et al Nature Geosci 2011 investigated pathways for return of buoyant, subducted material to arc crust. These include (1) diapirs rising into the hot mantle wedge, with extensive melts adding a component to arc magmas, (2) flow of material back up a relatively cold "subduction channel", adding solids to the lower crust and small-degree partial melts to the upper crust, (3) flow from the forearc along the base of arc crust, and (4) imbrication of forearc material into arc crust. These processes add felsic, incompatible-element-rich components to arc crust. The flux of incompatible elements such as Th in arc lavas, thought to be mainly recycled from subducted sediments, is > sediment subduction flux. There are large uncertainties: arc crustal growth rates are imprecise; young, primitive arc lavas may not be representative of magmatic flux into arc crust; sediment subduction flux may have varied. Nevertheless, this result is found for all arcs examined, using recently published growth rates. Perhaps arc growth rates that include subduction erosion are systematically overestimated. Instead or in addition, maybe significant Th comes from material other than sediments. Here, we consider the implications of pathways 1-4 for arc growth rates and incompatible element enrichment, in the context of subduction erosion and arc-arc collision. Subducting arc lithologies can become separated, with only felsic components returned to arc crust. Buoyant lithologies are mobile in viscous instabilities at > 700-800°C. Whereas thin layers such as sediments may become mobile all at once, instabilities may periodically strip the hottest parts from the top of thick buoyant layers, replacing them with hot mantle. In arc-arc collision, the top of a subducting plate starts at about 0°C on the seafloor, so heating is slow. In subduction erosion, forearc material in the subducting package can be > 200°C before erosion so buoyant lithologies reach 700-800

  6. Combustion Byproducts Recycling Consortium

    SciTech Connect

    Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

    2008-08-31

    The Combustion Byproducts Recycling Consortium (CBRC) program was developed as a focused program to remove and/or minimize the barriers for effective management of over 123 million tons of coal combustion byproducts (CCBs) annually generated in the USA. At the time of launching the CBRC in 1998, about 25% of CCBs were beneficially utilized while the remaining was disposed in on-site or off-site landfills. During the ten (10) year tenure of CBRC (1998-2008), after a critical review, 52 projects were funded nationwide. By region, the East, Midwest, and West had 21, 18, and 13 projects funded, respectively. Almost all projects were cooperative projects involving industry, government, and academia. The CBRC projects, to a large extent, successfully addressed the problems of large-scale utilization of CCBs. A few projects, such as the two Eastern Region projects that addressed the use of fly ash in foundry applications, might be thought of as a somewhat smaller application in comparison to construction and agricultural uses, but as a novel niche use, they set the stage to draw interest that fly ash substitution for Portland cement might not attract. With consideration of the large increase in flue gas desulfurization (FGD) gypsum in response to EPA regulations, agricultural uses of FGD gypsum hold promise for large-scale uses of a product currently directed to the (currently stagnant) home construction market. Outstanding achievements of the program are: (1) The CBRC successfully enhanced professional expertise in the area of CCBs throughout the nation. The enhanced capacity continues to provide technology and information transfer expertise to industry and regulatory agencies. (2) Several technologies were developed that can be used immediately. These include: (a) Use of CCBs for road base and sub-base applications; (b) full-depth, in situ stabilization of gravel roads or highway/pavement construction recycled materials; and (c) fired bricks containing up to 30%-40% F

  7. Lateral canthal surgery.

    PubMed

    Chong, Kelvin Kam-Lung; Goldberg, Robert A

    2010-08-01

    The lateral canthus is a delicate and complicated three-dimensional structure with function relevant to the health of the ocular surface. Dysfunction of the lateral canthus, due to aging changes or iatrogenic trauma, results in ocular morbidity ranging from chronic irritation to tearing to recalcitrant keratopathy. From an aesthetic standpoint, symmetric, normally positioned lateral canthi are cornerstones of youthful periorbital appearance, disruption of which leads to cosmetically significant deformity or asymmetry. Reconstruction of the lateral canthus is important in the rehabilitation of the aging eyelid and an unfortunate necessity after failed lateral canthal surgery. The common methods for improving or maintaining position, tone, and shape of the lower eyelid and lateral canthus use tightening or shortening the lower eyelid horizontally, keeping the canthal angle in an appropriate vertical level, and hugging the ocular surface. Many techniques have been described for the reconstruction of the lateral canthus in functional conditions or for aesthetic purposes. These methods have met with varying success. In this article, we begin with a discussion of the anatomy and physiology of the lateral canthus, followed by clinical examples of lateral canthal abnormalities and underlying pathophysiologies. A review of surgical options for the lateral canthus is presented with concluding remarks on postoperative complications. PMID:20524167

  8. Cross-border mobility and social networks: Laotians seeking medical treatment along the Thai border.

    PubMed

    Bochaton, Audrey

    2015-01-01

    Drawing upon research conducted on cross-border patients living in Laos and seeking care in Thailand, this paper examines the important role played by social networks in patients' decision-making and on the itineraries they choose to seek treatment on the Thai side of the border. Due to the vastly contrasting situations between the two countries in terms of healthcare supply, and considering Laotians' increasing demand for high quality healthcare, a number of them have managed to satisfy their needs by combining cross-border treatment with the use of the healthcare facilities provided by their own country. This study consisted first of household surveys conducted in five border areas (2006-2007) in Laos in order to quantify and map out cross-border healthcare-related travel patterns. Afterwards, interviews were conducted with cross-border patients (55), Laotian and Thai medical doctors (6), Thai social workers (5), and officials working in public institutions (12). While socioeconomic and spatial factors partly explain cross-border mobility, patients' social networks significantly influence treatment itineraries throughout the decision-making process, including logistical and financial considerations. The social networks existing at different geographical levels (neighbourhood, regional and global) are therefore a powerful analytical tool not only for understanding the emergence of these cross-border movements but also for justifying them in an authoritarian political environment such as Lao PDR's. PMID:25454637

  9. "Quality's "Others"?" The Politics of Bordering and Re-Bordering Our Educational Standards

    ERIC Educational Resources Information Center

    Soudien, Crain

    2011-01-01

    The 14th World Congress of the World Council of Comparative Education Societies (WCCES), held in Istanbul in June 2010, was entitled "Bordering, re-bordering and new possibilities for change in education and society". It opened with this address, in which the author explores how the idea of a norm works for education using key benchmarking…

  10. Network communities within and across borders

    PubMed Central

    Cerina, Federica; Chessa, Alessandro; Pammolli, Fabio; Riccaboni, Massimo

    2014-01-01

    We investigate the impact of borders on the topology of spatially embedded networks. Indeed territorial subdivisions and geographical borders significantly hamper the geographical span of networks thus playing a key role in the formation of network communities. This is especially important in scientific and technological policy-making, highlighting the interplay between pressure for the internationalization to lead towards a global innovation system and the administrative borders imposed by the national and regional institutions. In this study we introduce an outreach index to quantify the impact of borders on the community structure and apply it to the case of the European and US patent co-inventors networks. We find that (a) the US connectivity decays as a power of distance, whereas we observe a faster exponential decay for Europe; (b) European network communities essentially correspond to nations and contiguous regions while US communities span multiple states across the whole country without any characteristic geographic scale. We confirm our findings by means of a set of simulations aimed at exploring the relationship between different patterns of cross-border community structures and the outreach index. PMID:24686380

  11. Network communities within and across borders

    NASA Astrophysics Data System (ADS)

    Cerina, Federica; Chessa, Alessandro; Pammolli, Fabio; Riccaboni, Massimo

    2014-04-01

    We investigate the impact of borders on the topology of spatially embedded networks. Indeed territorial subdivisions and geographical borders significantly hamper the geographical span of networks thus playing a key role in the formation of network communities. This is especially important in scientific and technological policy-making, highlighting the interplay between pressure for the internationalization to lead towards a global innovation system and the administrative borders imposed by the national and regional institutions. In this study we introduce an outreach index to quantify the impact of borders on the community structure and apply it to the case of the European and US patent co-inventors networks. We find that (a) the US connectivity decays as a power of distance, whereas we observe a faster exponential decay for Europe; (b) European network communities essentially correspond to nations and contiguous regions while US communities span multiple states across the whole country without any characteristic geographic scale. We confirm our findings by means of a set of simulations aimed at exploring the relationship between different patterns of cross-border community structures and the outreach index.

  12. Network communities within and across borders.

    PubMed

    Cerina, Federica; Chessa, Alessandro; Pammolli, Fabio; Riccaboni, Massimo

    2014-01-01

    We investigate the impact of borders on the topology of spatially embedded networks. Indeed territorial subdivisions and geographical borders significantly hamper the geographical span of networks thus playing a key role in the formation of network communities. This is especially important in scientific and technological policy-making, highlighting the interplay between pressure for the internationalization to lead towards a global innovation system and the administrative borders imposed by the national and regional institutions. In this study we introduce an outreach index to quantify the impact of borders on the community structure and apply it to the case of the European and US patent co-inventors networks. We find that (a) the US connectivity decays as a power of distance, whereas we observe a faster exponential decay for Europe; (b) European network communities essentially correspond to nations and contiguous regions while US communities span multiple states across the whole country without any characteristic geographic scale. We confirm our findings by means of a set of simulations aimed at exploring the relationship between different patterns of cross-border community structures and the outreach index. PMID:24686380

  13. Recycling concepts for thermoplastic composites

    SciTech Connect

    Lochem, J.H. van; Henriksen, C.; Lund, H.H.

    1995-10-01

    Thermoplastic short fiber composite materials are increasingly being used as insulating materials in electricity distribution. Economically they possess good opportunities for material recycling and reuse due to the high virgin price. To investigate the recycling potential of post-consumer components, PPS40%GF and PBT30%GF, representing commonly used insulating materials, have been artificially aged and recycled. To simulate 10 years of service life, injection molded tensile bars have been aged in different environments varying temperature, humidity and pH. After accelerated aging, the aging state has been characterized by tensile and impact strength, viscoelastic behavior (DMTA), molecular weight, crystallinity (DSC) and fracture behavior (SEM). These properties have been compared to virgin material. The aged materials have been recycled by regranulation and compounds with different ratios virgin/aged material and different coupling agents to repair the glass-matrix interface. Injection molded compounds were characterized by short and long term properties. Recompounding PBT30%GF with virgin material and no added coupling agents results in a partial recovery of the fiber-matrix adhesion. Based on the first short-term characterizations PBT30%GF seems not very suitable for reuse in primary applications. PPS40%GF seems more suitable for reuse in primary applications after recycling. Although the short-term mechanical properties of the aged batches do not recover after recycling, the fiber-matrix adhesion improves especially when adding coupling agents. Further long-term testing in creep and humid environments during the remaining part of this project will show whether the improved interface properties make recycled materials valuable for reuse in various industrial applications.

  14. 50 Simple Things Kids Can Do To Recycle. California Edition.

    ERIC Educational Resources Information Center

    Javna, John

    This book provides 50 recycling ideas for children and features Recycle Rex, the state of California's "spokesdinosaur" for recycling. An introduction contains recycling background information on waste disposal options and reducing, reusing, and recycling. Recycling suggestions are divided into nine sections: (1) "Learn What You Can Recycle"…

  15. PRESENT CONDITION OF FOOD WASTE RECYCLING LOOP BASED ON RECYCLING PROJECT CERTIFICATION OF THE FOOD WASTE RECYCLING LAW

    NASA Astrophysics Data System (ADS)

    Kita, Tomoko; Kanaya, Ken

    Purpose of this research is to clear present condition of food waste recycling loops based on recycling project certification of the Food Waste Recycling Law. Method of this research is questionnaire survey to companies constituting the loops. Findings of this research are as follows: 1. Proponents of the loop is most often the recycling companies. 2. Food waste recycling rate is 61% for the food retailing industry and 81% for the food service industry. These values are higher than the national average in 2006. The effect of the revision of recycling project certification is suggested.

  16. DWPF Recycle Evaporator Simulant Tests

    SciTech Connect

    Stone, M

    2005-04-05

    Testing was performed to determine the feasibility and processing characteristics of an evaporation process to reduce the volume of the recycle stream from the Defense Waste Processing Facility (DWPF). The concentrated recycle would be returned to DWPF while the overhead condensate would be transferred to the Effluent Treatment Plant. Various blends of evaporator feed were tested using simulants developed from characterization of actual recycle streams from DWPF and input from DWPF-Engineering. The simulated feed was evaporated in laboratory scale apparatus to target a 30X volume reduction. Condensate and concentrate samples from each run were analyzed and the process characteristics (foaming, scaling, etc) were visually monitored during each run. The following conclusions were made from the testing: Concentration of the ''typical'' recycle stream in DWPF by 30X was feasible. The addition of DWTT recycle streams to the typical recycle stream raises the solids content of the evaporator feed considerably and lowers the amount of concentration that can be achieved. Foaming was noted during all evaporation tests and must be addressed prior to operation of the full-scale evaporator. Tests were conducted that identified Dow Corning 2210 as an antifoam candidate that warrants further evaluation. The condensate has the potential to exceed the ETP WAC for mercury, silicon, and TOC. Controlling the amount of equipment decontamination recycle in the evaporator blend would help meet the TOC limits. The evaporator condensate will be saturated with mercury and elemental mercury will collect in the evaporator condensate collection vessel. No scaling on heating surfaces was noted during the tests, but splatter onto the walls of the evaporation vessels led to a buildup of solids. These solids were difficult to remove with 2M nitric acid. Precipitation of solids was not noted during the testing. Some of the aluminum present in the recycle streams was converted from gibbsite to

  17. Control of Japanese honeysuckle in wildlife borders

    USGS Publications Warehouse

    Warbach, O.

    1953-01-01

    1. Japanese honeysuckle, an exotic that can be either a pest or an asset in different localities, makes maintenance of wildlife plantings in the Southeast a difficult problem. 2. A herbicide applied during the winter and strong enough to kill dormant woody plants will stop the spread of honeysuckle from a woods edge for at least two years. 3. A low-percentage 2,4-D water spray applied to honeysuckle growing in bicolor lespedeza borders at a time when honeysuckle is starting growth and bicolor is still dormant will selectively destroy the vine without injuring the border. 4. Studies on control of honeysuckle in multiflora rose, shrub borders, and contour hedges by herbicides are planned for the future.

  18. BTFS: The Border Trade Facilitation System

    SciTech Connect

    Phillips, L.R.

    1999-03-18

    The author demonstrates the Border Trade Facilitation System (BTFS), an agent-based bilingual e-commerce system built to expedite the regulation, control, and execution of commercial trans-border shipments during the delivery phase. The system was built to serve maquila industries at the US/Mexican border. The BTFS uses foundation technology developed here at Sandia Laboratories' Advanced Information Systems Lab (AISL), including a distributed object substrate, a general-purpose agent development framework, dynamically generated agent-human interaction via the World-Wide Web, and a collaborative agent architecture. This technology is also the substrate for the Multi-Agent Simulation Management System (MASMAS) proposed for demonstration at this conference. The BTFS executes authenticated transactions among agents performing open trading over the Internet. With the BTFS in place, one could conduct secure international transactions from any site with an Internet connection and a web browser. The BTFS is currently being evaluated for commercialization.

  19. Radioactive materials in recycled metals.

    PubMed

    Lubenau, J O; Yusko, J G

    1995-04-01

    In recent years, the metal recycling industry has become increasingly aware of an unwanted component in metal scrap--radioactive material. Worldwide, there have been 35 instances where radioactive sources were unintentionally smelted in the course of recycling metal scrap. In some cases contaminated metal consumer products were distributed internationally. In at least one case, serious radiation exposures of workers and the public occurred. Radioactive material appearing in metal scrap includes sources subject to licensing under the Atomic Energy Act and also naturally occurring radioactive material. U.S. mills that have smelted a radioactive source face costs resulting from decontamination, waste disposal, and lost profits that range from 7 to 23 million U.S. dollars for each event. To solve the problem, industry and the government have jointly undertaken initiatives to increase awareness of the problem within the metal recycling industry. Radiation monitoring of recycled metal scrap is being performed increasingly by mills and, to a lesser extent, by scrap processors. The monitoring does not, however, provide 100% protection. Improvements in regulatory oversight by the government could stimulate improved accounting and control of licensed sources. However, additional government effort in this area must be reconciled with competing priorities in radiation safety and budgetary constraints. The threat of radioactive material in recycled metal scrap will continue for the foreseeable future and, thus, poses regulatory policy challenges for both developed and developing nations. PMID:7883556

  20. NORM Impact on Interdiction at Borders

    SciTech Connect

    Kouzes, Richard T.

    2009-08-01

    Detection and interdiction of nuclear, chemical, and biological weapons of mass destruction/disruption has become a priority for nations around the world. Large numbers of vehicles pass through international border crossings each day. The desire to interdict radiological material, including weapons and weapons material, has led to multiple deployments of instrumentation to detect radiation signatures at borders and within nations. The presence of naturally occurring radioactive material in the normal flow of commerce can have a negative impact on the methods for interdiction of radiological threats, and thus must be addressed with the instrumentation used.

  1. Plateau borders of smectic liquid crystalline films

    NASA Astrophysics Data System (ADS)

    Trittel, Torsten; Aldred, Ruth; Stannarius, Ralf

    2011-06-01

    We investigate the geometrical properties of Plateau borders in an arrangement of connected smectic A free standing films. The geometry is chosen such that a circular Plateau border surrounds a planar smectic film and connects it with two smectic catenoids. It is demonstrated that, similar to soap films, the smectic film geometry can be described by a negative line tension of the circular contact region. Thus, the equilibrium angle between the films depends upon the liquid content in this region, and with increasing liquid content, deviations from Plateau's rule are observed. The experimental results are qualitatively comparable to soap films. A possible origin of slight quantitative differences is discussed.

  2. Meteors Without Borders: a global campaign

    NASA Astrophysics Data System (ADS)

    Heenatigala, T.

    2012-01-01

    "Meteors Without Borders" is a global project, organized by Astronomers Without Borders and launched during the Global Astronomy Month in 2010 for the Lyrid meteor shower. The project focused on encouraging amateur astronomy groups to hold public outreach events for major meteor showers, conduct meteor-related classroom activities, photography, poetry and art work. It also uses social-media platforms to connect groups around the world to share their observations and photography, live during the events. At the International Meteor Conference 2011, the progress of the project was presented along with an extended invitation for collaborations for further improvements of the project.

  3. Border patrol: insights into the unique role of perlecan/heparan sulfate proteoglycan 2 at cell and tissue borders.

    PubMed

    Farach-Carson, Mary C; Warren, Curtis R; Harrington, Daniel A; Carson, Daniel D

    2014-02-01

    The extracellular matrix proteoglycan (ECM) perlecan, also known as heparan sulfate proteoglycan 2 or HSPG2, is one of the largest (>200 nm) and oldest (>550 M years) extracellular matrix molecules. In vertebrates, perlecan's five-domain structure contains numerous independently folding modules with sequence similarities to other ECM proteins, all connected like cars into one long, diverse complex train following a unique N-terminal domain I decorated with three long glycosaminoglycan chains, and an additional glycosaminoglycan attachment site in the C-terminal domain V. In lower invertebrates, perlecan is not typically a proteoglycan, possessing the majority of the core protein modules, but lacking domain I where the attachment sites for glycosaminoglycan chains are located. This suggests that uniting the heparan sulfate binding growth factor functions of domain I and the core protein functions of the rest of the molecule in domains II-V occurred later in evolution for a new functional purpose. In this review, we surveyed several decades of pertinent literature to ask a fundamental question: Why did nature design this protein uniquely as an extraordinarily long multifunctional proteoglycan with a single promoter regulating expression, rather than separating these functions into individual proteins that could be independently regulated? We arrived at the conclusion that the concentration of perlecan at functional borders separating tissues and tissue layers is an ancient key function of the core protein. The addition of the heparan sulfate chains in domain I likely occurred as an additional means of binding the core protein to other ECM proteins in territorial matrices and basement membranes, and as a means to reserve growth factors in an on-site depot to assist with rapid repair of those borders when compromised, such as would occur during wounding. We propose a function for perlecan that extends its role from that of an extracellular scaffold, as we previously

  4. Border Patrol: Insights into the Unique Role of Perlecan/Heparan Sulfate Proteoglycan2 at Cell and Tissue Borders

    PubMed Central

    Farach-Carson, Mary C.; Warren, Curtis R.; Harrington, Daniel A.; Carson, Daniel D.

    2013-01-01

    The extracellular matrix proteoglycan (ECM) perlecan, also known as heparan sulfate proteoglycan 2 or HSPG2, is one of the largest (>200 nm) and oldest (>550M years) extracellular matrix molecules. In vertebrates, perlecan’s five-domain structure contains numerous independently folding modules with sequence similarities to other ECM proteins, all connected like cars into one long, diverse complex train following a unique N-terminal domain I decorated with three long glycosaminoglycan chains, and an additional glycosaminoglycan attachment site in the C-terminal domain V. In lower invertebrates, perlecan is not typically a proteoglycan, possessing the majority of the core protein modules, but lacking domain I where the attachment sites for glycosaminoglycan chains are located. This suggests that uniting the heparan sulfate binding growth factor functions of domain I and the core protein functions of the rest of the molecule in domains II-V occurred later in evolution for a new functional purpose. In this review, we surveyed several decades of pertinent literature to ask a fundamental question: Why did nature design this protein uniquely as an extraordinarily long multifunctional proteoglycan with a single promoter regulating expression, rather than separating these functions into individual proteins that could be independently regulated? We arrived at the conclusion that the concentration of perlecan at functional borders separating tissues and tissue layers is an ancient key function of the core protein. The addition of the heparan sulfate chains in domain I likely occurred as an additional means of binding the core protein to other ECM proteins in territorial matrices and basement membranes, and as a means to reserve growth factors in an on-site depot to assist with rapid repair of those borders when compromised, such as would occur during wounding. We propose a function for perlecan that extends its role from that of an extracellular scaffold, as we previously

  5. Discoid lateral meniscus.

    PubMed

    Fritschy, D; Gonseth, D

    1991-01-01

    Discoid meniscus is uncommon and usually affects the lateral meniscus. We present 16 patients (8 male and 6 female) with tears of a discoid lateral meniscus occurring in 1800 arthroscopies. We carried out an arthroscopic partial meniscectomy leaving an intact peripheral rim. This is biomechanically satisfactory and the early results are encouraging. PMID:1917190

  6. Recycling Expensive Medication: Why Not?

    PubMed Central

    Pomerantz, Jay M

    2004-01-01

    New (and proposed) advances in packaging, preserving, labeling, and verifying product integrity of individual tablets and capsules may allow for the recycling of certain expensive medicines. Previously sold, but unused, medication, if brought back to special pharmacies for resale or donation, may provide a low-cost source of patent-protected medicines. Benefits of such a program go beyond simply providing affordable medication to the poor. This article suggests that medicine recycling may be a possibility (especially if manufacturers are mandated to blister-package and bar-code individual tablets and capsules). This early discussion of medication recycling identifies relevant issues, such as: need, rationale, existing programs, available supplies, expiration dates, new technology for ensuring safety and potency, environmental impact, public health benefits, program focus, program structure, and liability. PMID:15266231

  7. Recycling expensive medication: why not?

    PubMed

    Pomerantz, Jay M

    2004-01-01

    New (and proposed) advances in packaging, preserving, labeling, and verifying product integrity of individual tablets and capsules may allow for the recycling of certain expensive medicines. Previously sold, but unused, medication, if brought back to special pharmacies for resale or donation, may provide a low-cost source of patent-protected medicines. Benefits of such a program go beyond simply providing affordable medication to the poor. This article suggests that medicine recycling may be a possibility (especially if manufacturers are mandated to blister-package and bar-code individual tablets and capsules). This early discussion of medication recycling identifies relevant issues, such as: need, rationale, existing programs, available supplies, expiration dates, new technology for ensuring safety and potency, environmental impact, public health benefits, program focus, program structure, and liability. PMID:15266231

  8. The California Border Health Collaborative: A Strategy for Leading the Border to Better Health.

    PubMed

    Matthews, Charles Edwards; Wooten, Wilma; Gomez, María Gudelia Rangel; Kozo, Justine; Fernandez, April; Ojeda, Victoria D

    2015-01-01

    There are hundreds of people and organizations working on border health issues in the California-Baja California border region trying to protect and improve health. These efforts are being conducted without a collaborative structure that integrates jurisdictions and organizations. Thus, there is a need to coordinate these organizations to work together and benefit from their collective effort and each other's best practices. The outcome of such an effort could effectively improve the health in the border region. The newly developed "California Border Health Collaborative" unites organizations and provides the leadership and collaborative culture to positively improve the health of the border region; it is referred to as the "Collaborative." This article describes the developmental process of this Collaborative, including partner engagement, governance, strategic planning, key elements for success, the roles of multi-level jurisdictions, and policy implications. This paper focuses on describing the preparation and processes that created the U.S./California side of this binational collaborative effort and is a strong reflection of the theory of border collaboration as described by Denman and De Sonora (1) in "Working beyond Borders: A Handbook for Transborder Projects in Health." PMID:26075195

  9. The California Border Health Collaborative: A Strategy for Leading the Border to Better Health

    PubMed Central

    Matthews, Charles Edwards; Wooten, Wilma; Gomez, María Gudelia Rangel; Kozo, Justine; Fernandez, April; Ojeda, Victoria D.

    2015-01-01

    There are hundreds of people and organizations working on border health issues in the California–Baja California border region trying to protect and improve health. These efforts are being conducted without a collaborative structure that integrates jurisdictions and organizations. Thus, there is a need to coordinate these organizations to work together and benefit from their collective effort and each other’s best practices. The outcome of such an effort could effectively improve the health in the border region. The newly developed “California Border Health Collaborative” unites organizations and provides the leadership and collaborative culture to positively improve the health of the border region; it is referred to as the “Collaborative.” This article describes the developmental process of this Collaborative, including partner engagement, governance, strategic planning, key elements for success, the roles of multi-level jurisdictions, and policy implications. This paper focuses on describing the preparation and processes that created the U.S./California side of this binational collaborative effort and is a strong reflection of the theory of border collaboration as described by Denman and De Sonora (1) in “Working beyond Borders: A Handbook for Transborder Projects in Health.” PMID:26075195

  10. [Semidiscoid lateral meniscus].

    PubMed

    Araki, Y; Ishida, T; Ootani, M; Yamamoto, H; Yamamoto, T; Nakamura, H; Tsukaguchi, I

    1992-12-25

    We propose a new entity known as "semidiscoid lateral meniscus" of the knee. The diagnostic criteria for semidiscoid lateral meniscus is the appearance on a thin-sliced axial 3-D image of a crescent-shaped meniscus whose transverse width is within 11.6 mm to 14.3 mm on the coronal image. These numerical values were calculated by discriminant analysis. A retrospective review of MR examinations of the knees revealed 15 patients (15 knees) with this entity. These patients were our subjects. Of these 15 patients, complicated lateral meniscal tears were seen in only three cases. Nine knees were free from complications, and five were asymptomatic. Six patients were examined with MR on the contralateral side, and discoid lateral menisci were revealed in all cases. Thus semidiscoid lateral meniscus shows a cross-relationship with discoid menisci. PMID:1488290

  11. International radioactive material recycling challenges

    SciTech Connect

    Greeves, John T.; Lieberman, James

    2007-07-01

    The paper explores current examples of successful International radioactive recycling programs and also explores operational regulatory and political challenges that need to be considered for expanding international recycling world-wide. Most countries regulations are fully consistent with the International Atomic Agency (IAEA) Code of Practice on the International Transboundary Movement of Radioactive Material and the IAEA Code of Conduct on the Safety and Security of Radioactive Sources. IAEA member States reported on the status of their efforts to control transboundary movement of radioactive material recently during the Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management meeting in May 2006. (authors)

  12. Process to recycle shredder residue

    DOEpatents

    Jody, Bassam J.; Daniels, Edward J.; Bonsignore, Patrick V.

    2001-01-01

    A system and process for recycling shredder residue, in which separating any polyurethane foam materials are first separated. Then separate a fines fraction of less than about 1/4 inch leaving a plastics-rich fraction. Thereafter, the plastics rich fraction is sequentially contacted with a series of solvents beginning with one or more of hexane or an alcohol to remove automotive fluids; acetone to remove ABS; one or more of EDC, THF or a ketone having a boiling point of not greater than about 125.degree. C. to remove PVC; and one or more of xylene or toluene to remove polypropylene and polyethylene. The solvents are recovered and recycled.

  13. Polymer recycling: opportunities and limitations.

    PubMed Central

    Stein, R S

    1992-01-01

    The disposal of polymer solid waste by means other than landfilling is necessary. The various approaches-source reduction, incineration, degradation, composting, and recycling-all have their roles and must be employed in an integrated manner. Where appropriate, recycling has ecological advantages, but its application is dependent upon the feasibility of collection, sorting, and/or compatibilization of resulting mixtures to produce economically viable products. The practice should be encouraged by societal or legislative pressure which recognizes that the cost of disposal should be a factor in determining the cost of a product. PMID:11607263

  14. Recycler short kicker beam impedance

    SciTech Connect

    Crisp, Jim; Fellenz, Brian; /Fermilab

    2009-07-01

    Measured longitudinal and calculated transverse beam impedance is presented for the short kicker magnets being installed in the Fermilab Recycler. Fermi drawing number ME-457159. The longitudinal impedance was measured with a stretched wire and the Panofsky equation was used to estimate the transverse impedance. The impedance of 3319 meters (the Recycler circumference) of stainless vacuum pipe is provided for comparison. Although measurements where done to 3GHz, impedance was negligible above 30MHz. The beam power lost to the kicker impedance is shown for a range of bunch lengths. The measurements are for one kicker assuming a rotation frequency of 90KHz. Seven of these kickers are being installed.

  15. Smart border: ad-hoc wireless sensor networks for border surveillance

    NASA Astrophysics Data System (ADS)

    He, Jun; Fallahi, Mahmoud; Norwood, Robert A.; Peyghambarian, Nasser

    2011-06-01

    Wireless sensor networks have been proposed as promising candidates to provide automated monitoring, target tracking, and intrusion detection for border surveillance. In this paper, we demonstrate an ad-hoc wireless sensor network system for border surveillance. The network consists of heterogeneously autonomous sensor nodes that distributively cooperate with each other to enable a smart border in remote areas. This paper also presents energy-aware and sleeping algorithms designed to maximize the operating lifetime of the deployed sensor network. Lessons learned in building the network and important findings from field experiments are shared in the paper.

  16. A Guide to Running a Recycling Project. [Includes Recycling Handbook].

    ERIC Educational Resources Information Center

    Oregon Recycling Information and Organizing Network, Portland.

    This guide, designed for both students and adults, is intended for individuals who feel they might be interested in establishing a recycling depot. The guide includes such pertinent information as deciding how to set up a depot, markets and transportation, preparation of materials, where to place the depot and when to operate it, publicity and…

  17. The Recycling Solution: How I Increased Recycling on Dilworth Road

    ERIC Educational Resources Information Center

    Keller, J. Jacob

    2010-01-01

    The grandson of Fred Keller, one of the founders of behavior analysis, Jacob was 10 years old when he conducted the project for his elementary school science fair. We recently contacted Jacob to learn more about his project. He told us the inspiration came from a class field trip to the county recycling center, which included seeing video footage…

  18. Sensory neuropathy in two Border collie puppies.

    PubMed

    Vermeersch, K; Van Ham, L; Braund, K G; Bhatti, S; Tshamala, M; Chiers, K; Schrauwen, E

    2005-06-01

    A peripheral sensory neuropathy was diagnosed in two Border collie puppies. Neurological, electrophysiological and histopathological examinations suggested a purely sensory neuropathy with mainly distal involvement. Urinary incontinence was observed in one of the puppies and histological examination of the vagus nerve revealed degenerative changes. An inherited disorder was suspected. PMID:15971901

  19. 50 CFR 14.16 - Border ports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 1 2011-10-01 2011-10-01 false Border ports. 14.16 Section 14.16 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS IMPORTATION, EXPORTATION, AND TRANSPORTATION...

  20. Border separation for adjacent orthogonal fields

    SciTech Connect

    Werner, B.L.; Khan, F.M.; Sharma, S.C.; Lee, C.K.; Kim, T.H. )

    1991-06-01

    Field border separations for adjacent orthogonal fields can be calculated geometrically, given the validity of some important assumptions such as beam alignment and field uniformity. Thermoluminescent dosimetry (TLD) measurements were used to investigate dose uniformity across field junctions as a function of field separation and, in particular, to review the CCSG recommendation for the treatment of medulloblastoma with separate head and spine fields.

  1. Stress Resilience among Border Mexican American Women

    ERIC Educational Resources Information Center

    Guinn, Bobby; Vincent, Vern; Dugas, Donna

    2009-01-01

    The purpose of this study was to identify factors distinguishing Mexican American women living near the U.S.-Mexican border who are resilient to the experience of stress from those who are not. The study sample consisted of 418 participants ranging in age from 20 to 61 years. Data were gathered through a self-report survey instrument composed of…

  2. Transcending Cultural Borders: Implications for Science Teaching.

    ERIC Educational Resources Information Center

    Jegede, Olugbemiro J.; Aikenhead, Glen S.

    1999-01-01

    Reviews collateral learning theory as a cognitive explanation for how pupils cope with disparate worldviews mediated by transcending cultural borders between their everyday culture and the culture of science. Proposes a new pedagogy in which teachers assume the role of culture broker in the classroom to achieve culturally sensitive curriculum and…

  3. Crossing Pedagogical Borders in the Yucatan Peninsula

    ERIC Educational Resources Information Center

    Willhauck, Susan

    2009-01-01

    A challenging intercultural teaching experience provided an opportunity for engaging embodied pedagogies that facilitated border crossings of language, age, gender, and experience. Influenced by the work of Augusto Boal, the author describes how improvisation, role-play, music, and drawing led seminary students in Mexico into sacred time and space…

  4. Collaborative community conservation along the border

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Janos grasslands are part of the Sky Islands, a unique region of more than 40 isolated mountain ridges surrounded by dry grasslands that straddles the México/Arizona/New Mexico border. It is one of America’s great hotspots for wildlife diversity. It is a transition zone between the Chihuahuan Deser...

  5. Recycling of used perfluorosulfonic acid membranes

    DOEpatents

    Grot, Stephen; Grot, Walther

    2007-08-14

    A method for recovering and recycling catalyst coated fuel cell membranes includes dissolving the used membranes in water and solvent, heating the dissolved membranes under pressure and separating the components. Active membranes are produced from the recycled materials.

  6. Food Service Recycling: Whose Responsibility Is It?

    ERIC Educational Resources Information Center

    Settanni, Barbara

    1990-01-01

    The food service department at a Pennsylvania school district recycles polystyrene "styrofoam" cups, plates, and food trays. In addition, the department recycles glass, aluminum, and paper. Offers advice on how to set up a school program. (MLF)

  7. Border bias: the belief that state borders can protect against disasters.

    PubMed

    Mishra, Arul; Mishra, Himanshu

    2010-11-01

    In this research, we documented a bias in which people underestimate the potential risk of a disaster to a target location when the disaster spreads from a different state, but not when it spreads from an equally distant location within the same state. We term this the border bias. Following research on categorization, we propose that people consider locations within a state to be part of the same superordinate category, but consider locations in two different states to be parts of different superordinate categories. The border bias occurs because people apply state-based categorization to events that are not governed by human-made boundaries. Such categorization results in state borders being considered physical barriers that can keep disasters at bay. We demonstrated the border bias for different types of disasters (earthquake, environmental risk) and tested the underlying process in three studies. PMID:20943938

  8. Household-battery recycling plant

    SciTech Connect

    Weber, A.; Antenen, A.

    1995-12-31

    Batrec operates a plant for the recycling of used dry batteries with a capacity of 3,000 tons per year. The plant is situated in a tourist area of Switzerland and has complied with all the strict emission restrictions. The process yields four products: FeMn, Zn, Hg and slag. No hazardous waste is produced. All types of batteries can be treated.

  9. Recycling, Thermodynamics and Environmental Thrift

    ERIC Educational Resources Information Center

    Berry, R. Stephen

    1972-01-01

    Compares the cost, in terms of thermodynamic potential, of manufacturing automobiles from raw mineral resources or from recycled vehicles, and of the production of extended-life products. Uses this as an example for arguing that new technologies, with efficiencies closer to the theoretical themodynamic minima, are needed if a society is to…

  10. Recycling: Activities for the Classroom.

    ERIC Educational Resources Information Center

    Bowman, Mary Lynne, Comp.; Coon, Herbert L., Comp.

    This publication provides 80 classroom activities for the teacher. These activities are designed for elementary through high school students and are action-oriented for participation in the school community. Each activity is classified according to appropriate grade level, subject matter, and recycling concept involved. In addition, each activity…

  11. Chemical recycling of scrap composites

    NASA Technical Reports Server (NTRS)

    Allred, Ronald E.; Salas, Richard M.

    1994-01-01

    There are no well-developed technologies for recycling composite materials other than grinding to produce fillers. New approaches are needed to reclaim these valuable resources. Chemical or tertiary recycling, conversion of polymers into low molecular weight hydrocarbons for reuse as chemicals or fuels, is emerging as the most practical means for obtaining value from waste plastics and composites. Adherent Technologies is exploring a low-temperature catalytic process for recycling plastics and composites. Laboratory results show that all types of plastics, thermosets as well as thermoplastics, can be converted in high yields to valuable hydrocarbon products. This novel catalytic process runs at 200 C, conversion times are rapid, the process is closed and, thus, nonpolluting, and no highly toxic gas or liquid products have been observed so no negative environmental impact will result from its implementation. Tests on reclamation of composite materials show that epoxy, imide, and engineering thermoplastic matrices can be converted to low molecular weight hydrocarbons leaving behind the reinforcing fibers for reuse as composite reinforcements in secondary, lower-performance applications. Chemical recycling is also a means to dispose of sensitive or classified organic materials without incineration and provides a means to eliminate or reduce mixed hazardous wastes containing organic materials.

  12. Status of the Fermilab Recycler

    SciTech Connect

    Derwent, P.F.; /Fermilab

    2007-09-01

    The author presents the current operational status of the Fermilab Recycler Ring. Using a mix of stochastic and electron cooling, we prepare antiproton beams for the Fermilab Tevatron Collider program. Included are discussion of stashing and cooling performance, operational scenarios, and collider performance.

  13. NATURAL SURFACTANTS IN PAPER RECYCLING

    EPA Science Inventory

    The objective of this project is to introduce new types of surfactants based on renewable materials (sugar surfactants) for use in ink removal from recycled paper. By applying green chemistry approaches we not only will solve an important industry and environmental problem but...

  14. Recycling steel from grinding swarf

    SciTech Connect

    Fu, H.; Matthews, M.A.; Warner, L.S.

    1998-12-31

    Two cleaning processes have been investigated for removing contaminants (cutting oil with phosphorus ester) from high speed steel (HSS) griding swarf. One process uses an aqueous surfactant washing technique, and the second process uses supercritical carbon dioxide (SCCO{sub 2}) extraction. Both technical and preliminary financial analysis are performed to have a better evaluation of these two competing cleaning technologies. Bench scale aqueous washings have shown that the required phosphorus removal is easily obtained, but a sufficient oil removal is more difficult. The experimental results also indicate a strong dependence of the aqueous washing efficiency on the choice of a suitable surfactant. SCCO{sub 2} extraction at 80 C and 340 atm shows that approximately 80% of the oil can be removed from swarf during a 60-minute process to produce a batch of recyclable steel, and that the phosphorus removal also reaches the required level. The cost of processing swarf using either aqueous surfactant washing or SCCO{sub 2} extraction in a 3,000,000 lbs per year plant is analyzed and the market forces impacting the feasibility of recycling on a commercial basis are reviewed. Commercial scale recycling is, in part, dependent upon resolution of regulatory uncertainty on the definition of swarf. States regulating swarf as hazardous provide a significant financial incentive to recycle. In states that regulate swarf as a solid waste, low disposal costs provide a disincentive that must be balanced with the possible hidden, future liabilities of landfill disposal.

  15. Recycled Water Poses Disinfectant Problem

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1973

    1973-01-01

    Discusses the possible health hazards resulting from released nucleic acid of inactivated viruses, chlorinated nonliving organic molecules, and overestimated reliability of waste treatment standards. Suggests the recycle system use a dual disinfectant such as chlorine and ozone in water treatment. (CC)

  16. How to Succeed in Recycling

    ERIC Educational Resources Information Center

    Ross, Mark

    1973-01-01

    A detailed manual for the establishment and maintenance of a recycling center. Presented in steps, it covers the following: Start Up; Operation (glass, paper, aluminum cans, etc., troubles and recommendations); and Key Addresses of organizations able to supply helpful information. (LK)

  17. Proceedings of the waste recycling workshop

    SciTech Connect

    Bailey, R.E.; Thomas, A.F.; Ries, M.A.

    1993-12-31

    Recorded are seventeen talks from five sessions at the workshop. FERMCO`s recycling program, state of the art recycling technology, and an integrated demonstration of deactivation, decommissioning and decommissioning are presented in the plenary session. In the concrete session, decontamination and recycling are discussed. In the transite session, regulations are considered along with recycling and decontamination. In the metals session, radioactive scrap metals are emphasized. And in the regulatory considerations and liabilities session, DOE and EPA viewpoints are discussed. (GHH)

  18. Amyotrophic Lateral Sclerosis

    MedlinePlus

    Amyotrophic lateral sclerosis (ALS) is a nervous system disease that attacks nerve cells called neurons in your ... people with ALS die from respiratory failure. The disease usually strikes between age 40 and 60. More ...

  19. Amyotrophic Lateral Sclerosis

    MedlinePlus

    Amyotrophic lateral sclerosis (ALS) is a nervous system disease that attacks nerve cells called neurons in your brain and spinal cord. These neurons ... breathing machine can help, but most people with ALS die from respiratory failure. The disease usually strikes ...

  20. Primary Lateral Sclerosis

    MedlinePlus

    ... synthesizers, and wheelchairs ma help some people retain independence.. Speech therapy may be useful for those with ... prevent, and ultimately cure these devastating diseases. NIH Patient Recruitment for Primary Lateral Sclerosis Clinical Trials At ...

  1. Recycling at Penn State's Beaver Stadium. "Recycle on the Go" Success Story

    ERIC Educational Resources Information Center

    US Environmental Protection Agency, 2009

    2009-01-01

    With a 13-year-old recycling program, The Pennsylvania State University's (Penn State) Beaver Stadium in the past diverted nearly 30 tons of recyclables per year from local landfills. A new initiative to promote recycling in the stadium's tailgating area has helped Penn State more than triple its old recycling record, collecting 112 tons in 2008.…

  2. [Border disease: a persistent virus infection in sheep (author's transl)].

    PubMed

    Terpstra, C

    1980-08-15

    Border disease (BD) is a congenital infection of sheep characterised by still-birth, abortion and the birth of weak lambs with nervous symptoms and sometimes an abnormally hairy birthcoat. The lambs are almost constantly trembling or shaking, they often have an erratic gait and in severe cases are unable to rise. The nervous signs are due to a defective myelinogensis of the central nervous system and tend to disappear at a later age. Many affected lambs die shortly after birth and those which survive usually show retarded growth. The disease is caused by a virus which is closely related to the virus of bovine virus diarrhoea (BVD). The virus may be isolated from every organ and is excreted with saliva, nasal discharge, urine and faeces. Clinically the diagnosis can be made with high probability when nervous signs and hairy birthcoat are both present. Laboratory diagnosis is based on the detection of antigen by immunofluorescence or virus isolation. In addition ewes of BD-affected lambs usually possess antibodies against BVD-virus. In some lambs, an immune response starts during prenatal life, others show a transient or lasting low level response at a later age, whereas still others remained serologically negative for at least 2 1/2 years. Asymptomatic virus carriers occur among lambs as well as among adult sheep. The persistently infected animals are continously shedding virus and thus maintain the infection in the flock. PMID:6252652

  3. Ames Lab 101: Rare-Earth Recycling

    SciTech Connect

    Ryan Ott

    2012-09-05

    Recycling keeps paper, plastics, and even jeans out of landfills. Could recycling rare-earth magnets do the same? Perhaps, if the recycling process can be improved. Scientists at the U.S. Department of Energy's Ames Laboratory are working to more effectively remove the neodymium, a rare earth, from the mix of other materials in a magnet.

  4. Recycled Office Paper: Why It Costs More.

    ERIC Educational Resources Information Center

    Usherson, Judy

    1992-01-01

    Discusses obstacles to making recycled office paper cheaper. Explains how the economics of recycled office paper discourages recycling by commodity mills. Includes discussion of integrated and nonintegrated mills, commodity and specialty mills, specialty printing and writing mills, postconsumer material, supply and demand, and economic…

  5. Recycling Technology: Can It Be Taught?

    ERIC Educational Resources Information Center

    Clum, James A.; Loper, Carl R., Jr.

    This paper describes the content of a seminar-type engineering course dealing with materials reutilization (recycling). The course, consisting of lecture and discussion by various faculty and outside experts as well as student presentations of research papers on recycling topics, is intended to investigate current areas in which recycling of…

  6. Fermilab Recycler Stochastic Cooling for Luminosity Production

    SciTech Connect

    Broemmelsiek, D.; Gattuso, C.

    2006-03-20

    The Fermilab Recycler began regularly delivering antiprotons for Tevatron luminosity operations in 2005. Methods for tuning the Recycler stochastic cooling system are presented. The unique conditions and resulting procedures for minimizing the longitudinal phase space density of the Recycler antiproton beam are outlined.

  7. Textile Recycling, Convenience, and the Older Adult.

    ERIC Educational Resources Information Center

    Domina, Tanya; Koch, Kathryn

    2001-01-01

    Results of a study to examine the recycling practices and needs of older adults (n=217) indicated that older adults do recycle traditional materials, but need accommodations for physical limitations. They report textile recycling as time consuming and difficult and used donations to religious organizations as their principal means of textile…

  8. Communication and Recycling in Park Campgrounds.

    ERIC Educational Resources Information Center

    Ham, Sam H.

    1984-01-01

    Evaluated the effectiveness of the Canby Washington State Park campground recycling program by determining whether campers (N=147) read and followed the provided instructions when disposing of garbage, understood the sorting and disposal instructions, and arrived at the park equipped with receptacles for recyclables and non-recyclables.…

  9. School Recycling Programs: A Handbook for Educators.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC.

    This brochure describes some of the many recycling program options that schools can implement in their communities. It focuses on implementing actual recycling projects as a way of teaching the importance and benefits of recycling. The text examines the solid waste crisis and why Americans cannot continue to possess a disposable mentality. It…

  10. Ames Lab 101: Rare-Earth Recycling

    ScienceCinema

    Ryan Ott

    2013-06-05

    Recycling keeps paper, plastics, and even jeans out of landfills. Could recycling rare-earth magnets do the same? Perhaps, if the recycling process can be improved. Scientists at the U.S. Department of Energy's Ames Laboratory are working to more effectively remove the neodymium, a rare earth, from the mix of other materials in a magnet.

  11. Pathways of lateral spreading.

    PubMed

    Jacobi, U; Schanzer, S; Weigmann, H-J; Patzelt, A; Vergou, T; Sterry, W; Lademann, J

    2011-01-01

    In the case of topically applied substances, usually both lateral spreading and competitive penetration into the skin occur in parallel. In the present study, the pathways of lateral spreading were studied quantitatively and visually. The local distribution and lateral spreading of the UV filter substance butyl methoxydibenzoylmethane applied in an o/w emulsion was studied on the forearm and the back. The tape stripping procedure was used to determine the recovery rates inside and outside the area of application. The skin characteristics of transepidermal water loss, pH value, hydration of the stratum corneum and sebum rate were determined at both anatomic sites. Photography and laser scanning microscopy were used to visually investigate the lateral spreading of topically applied dyes. On the back, a preferred direction of lateral spreading parallel to the body axis was observed. This result was caused by differences in the network of furrows. The furrows functioned as a pathway for lateral spreading, whereas the follicles formed a reservoir for the topically applied substance. PMID:21455016

  12. Developing effective messages about potable recycled water: The importance of message structure and content

    NASA Astrophysics Data System (ADS)

    Price, J.; Fielding, K. S.; Gardner, J.; Leviston, Z.; Green, M.

    2015-04-01

    Community opposition is a barrier to potable recycled water schemes. Effective communication strategies about such schemes are needed. Drawing on social psychological literature, two experimental studies are presented, which explore messages that improve public perceptions of potable recycled water. The Elaboration-Likelihood Model of information processing and attitude change is tested and supported. Study 1 (N = 415) premeasured support for recycled water, and trust in government information at Time 1. Messages varied in complexity and sidedness were presented at Time 2 (3 weeks later), and support and trust were remeasured. Support increased after receiving information, provided that participants received complex rather than simple information. Trust in government was also higher after receiving information. There was tentative evidence of this in response to two-sided messages rather than one-sided messages. Initial attitudes to recycled water moderated responses to information. Those initially neutral or ambivalent responded differently to simple and one-sided messages, compared to participants with positive or negative attitudes. Study 2 (N = 957) tested the effectiveness of information about the low relative risks, and/or benefits of potable recycled water, compared to control groups. Messages about the low risks resulted in higher support when the issue of recycled water was relevant. Messages about benefits resulted in higher perceived issue relevance, but did not translate into greater support. The results highlight the importance of understanding people's motivation to process information, and need to tailor communication to match attitudes and stage of recycled water schemes' development.

  13. International Border Management Systems (IBMS) Program : visions and strategies.

    SciTech Connect

    McDaniel, Michael; Mohagheghi, Amir Hossein

    2011-02-01

    Sandia National Laboratories (SNL), International Border Management Systems (IBMS) Program is working to establish a long-term border security strategy with United States Central Command (CENTCOM). Efforts are being made to synthesize border security capabilities and technologies maintained at the Laboratories, and coordinate with subject matter expertise from both the New Mexico and California offices. The vision for SNL is to provide science and technology support for international projects and engagements on border security.

  14. 75 FR 60643 - Customs and Border Protection Officer Retirement

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-01

    ...; ] OFFICE OF PERSONNEL MANAGEMENT 5 CFR Parts 831, 841, and 842 RIN 3206-AL69 Customs and Border Protection... available to customs and border protection officers under the Civil Service Retirement System (CSRS) and the... Act provides early retirement and enhanced annuity benefits for customs and border protection...

  15. 77 FR 1497 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-10

    ... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Application for Withdrawal of Bonded Stores for Fishing Vessels and Certificate of Use AGENCY: U.S. Customs and Border... comments to U.S. Customs and Border Protection, Attn: Tracey Denning, Regulations and Rulings, Office...

  16. Imagining and Imaging Borders: Understanding Borderlands for Global Sustainability

    NASA Astrophysics Data System (ADS)

    Konrad, V.

    2013-11-01

    Borders are increasingly complex human responses and social constructions in a world where globalizing forces confront basic human concerns for security and certainty. In an effort to provide a background to assess research directions for imaging borders, this paper explores what we know about borders, and what we do not know well about borders. Borders in globalization are the meeting points of globalizing forces of security, trade and migration flows with emerging technologies, self determination and regionalization around the world. We need to know more about how: self determination fuels secessions and new borders; borders result from complex rather than simple policy and governance issues; borders depend on the political clout of borderland communities; market and migration flows impact borders; and borders are always in motion. The paper shows how these organizing principles underlie the basic themes of border governance, flows, culture, history, security and sustainability. Finally, the paper offers two brief illustrations of border imaging to link this presentation to the following discussion of the workshop.

  17. DEMOGRAPHIC CHARACTERISTICS OF THE NHEXAS-ARIZONA BORDER STUDY POPULATION

    EPA Science Inventory

    The NHEXAS-Arizona Border Study employed a population based probability design to recruit a representative cohort residing within 40 Km of the US-Mexico Border in Arizona. As an extension of the NHEXAS Arizona statewide survey, the border study was designed to determine the dis...

  18. Materials Recycling: The Virtue of Necessity. Worldwatch Paper 56.

    ERIC Educational Resources Information Center

    Chandler, William U.

    This report focuses on the necessity and advantages of recycling. Following an introduction, the report is divided into five sections, addressing respectively: the necessity of recycling; waste paper recycling; aluminum recycling; iron and steel recycling; and three steps to a "recycling society." These steps include: (1) requiring that consumers…

  19. Recycling Trends in the Plastics Manufacturing and Recycling Companies in Malaysia

    NASA Astrophysics Data System (ADS)

    Wahab, D. A.; Abidin, A.; Azhari, C. H.

    This study presents the findings from a study on the consumption of recycled materials and recycling practices in the plastics manufacturing industry and recycling companies in Malaysia. The findings were obtained from a survey conducted in twenty plastic manufacturing companies and detailed case studies in three recycling companies. The survey conducted in the plastic manufacturing companies` shows that the consumption rate for poly-olefins (PP and PE) is the highest among the resin types and the industrial sector that consumes the most plastic materials is the electrical and electronics sector. The consumption of recycled materials is high among the local manufacturing companies (80%) which are largely due to cost savings; about 20% of these companies conducted in-house recycling. The study has also shown that the medium scale industry consumes the most recycled materials as compared to the large and small scale industry. The rate of disposal for plastic materials in the local industry is approximately 5%. The detailed case studies conducted in the recycling companies have successfully identified the main processes involved in plastic recycling namely manual sorting, cleaning, drying, meshing/pelletising and packaging. These recycling companies obtained recycled materials from various sources including industrial scrap, dumping sites, local producers as well as imported sources. Pricing of recycled materials were based on classification according to grade and quality of the recycled materials. The study has reflected the extent of in-house recycling trends in the local plastic manufacturing companies and their dependency on the supply from the local recycling companies.

  20. An overview of recycling refractory materials

    SciTech Connect

    Bennett, James P.; Kwong, Kyei-Sing

    2004-09-01

    Refractory materials must be disposed of or recycled when removed from service. Off-specification or reject material has been reused by the refractory industry for a number of years, with small percentages of these materials added as a part of refractory formulations. Historically, limed reuse of spent refractory materials in other applications has occurred. Environmental legislation, stewardship programs, and other forces encouraged some businesses to recycle spent refractories. Reuse of spent refractory material varies considerably among different industries and with the location of the industrial user. Efforts to recycle, the driving forces for recycling, and issues and steps to be taken into account initiating a recycling program will be discussed.

  1. Carambola optics for recycling of light

    NASA Astrophysics Data System (ADS)

    Leutz, Ralf; Fu, Ling; Ries, Harald

    2006-04-01

    Recycling of light allows the luminance (radiance) emitted by a light source to be increased at the cost of reducing the total luminous flux (radiant power). Recycling of light means returning part of the emitted light to the source, where part of it will escape absorption. An optical design that is suitable for multiple and controlled recycling is described. Carambola optics is named for its resemblance to star fruit. Several pairs of mirrors or prisms redirect light repeatedly onto the source, thus achieving multiple transits of the light through the source. This recycled light exits the carambola in the same phase space as light directly emitted and not recycled.

  2. Cross-Border Policy Effects on Alcohol Outcomes: Drinking Without Thinking on the U.S.-Mexico Border?

    PubMed Central

    Mills, Britain A.; Caetano, Raul; Vaeth, Patrice

    2014-01-01

    Background Rates of alcohol-related outcomes are sensitive to policy differences in politically distinct, adjacent territories. Factors that shape these cross-border effects, particularly when the policy differences are longstanding, remain poorly understood. We compared the ability of two classes of variables with theoretical relevance to the U.S.-Mexico border context – bar attendance and alcohol-related social-cognitive variables – to explain elevated drinking on the U.S. side of the border relative to other areas of the U.S. Methods Data were collected from multi-stage cluster samples of adult Mexican Americans on and off the U.S.-Mexico Border (current drinker N=1351). Structural equation models were used to test drinking context (frequency of bar attendance) and six different social-cognitive variables (including alcohol-related attitudes, norms, motives, and beliefs) as mediators of border effects on a composite drinking index. Results The border effect on drinking varied by age (with younger adults showing a stronger effect), consistent with previous findings and known risk factors in the region. Contrary to theoretical expectations, six different social-cognitive variables – despite relating strongly with drinking – were comparable in border and non-border areas (within and across age) and played no role in elevated drinking on the border. Conversely, elevated drinking among border youth was mediated by bar attendance. This mediated moderation effect held after adjusting for potential sociodemographic and neighborhood-level confounders. Conclusions Increased drinking among U.S.-Mexico border youth is explained by patterns of bar attendance, but not by more permissive alcohol-related social-cognitive variables in border areas: Border youth attend bars and drink more than their non-border counterparts, despite having comparable alcohol-related beliefs, attitudes, norms, and motives for use. Alcohol's heightened availability and visibility on both

  3. Composite material from recycled polyester for recyclable automobile structures

    SciTech Connect

    Lertola, J.G.

    1995-12-31

    DuPont has developed a compression-moldable composite made from the thermoplastic polyester PET and long glass fibers. This material, XTC{trademark}, is part of the class of materials known as GMT`s, or glass-mat thermoplastics. The PET content in XTC{trademark} allows the use of a wide variety of recycled material that might otherwise end up in landfills and incinerators. DuPont has succeeded in using 100% post-consumer polyester, from bottles, film, or fibers, in the composite. Since processing involves heating the material to the melt in air, the main technical issues are hydrolysis and oxidative degradation. Impurities in the recycled material must be carefully monitored, as they often increase the extent of degradation. The product itself, used to mold shaped structures and body panels for automobiles, may be recycled after its useful life. Depending on the needed purity level, processes ranging from injection molding to methanolysis can turn ground XTC{trademark} parts back into new, useful products.

  4. Laterally closed lattice homomorphisms

    NASA Astrophysics Data System (ADS)

    Toumi, Mohamed Ali; Toumi, Nedra

    2006-12-01

    Let A and B be two Archimedean vector lattices and let be a lattice homomorphism. We call that T is laterally closed if T(D) is a maximal orthogonal system in the band generated by T(A) in B, for each maximal orthogonal system D of A. In this paper we prove that any laterally closed lattice homomorphism T of an Archimedean vector lattice A with universal completion Au into a universally complete vector lattice B can be extended to a lattice homomorphism of Au into B, which is an improvement of a result of M. Duhoux and M. Meyer [M. Duhoux and M. Meyer, Extended orthomorphisms and lateral completion of Archimedean Riesz spaces, Ann. Soc. Sci. Bruxelles 98 (1984) 3-18], who established it for the order continuous lattice homomorphism case. Moreover, if in addition Au and B are with point separating order duals (Au)' and B' respectively, then the laterally closedness property becomes a necessary and sufficient condition for any lattice homomorphism to have a similar extension to the whole Au. As an application, we give a new representation theorem for laterally closed d-algebras from which we infer the existence of d-algebra multiplications on the universal completions of d-algebras.

  5. Laterally bendable belt conveyor

    DOEpatents

    Peterson, William J.

    1985-01-01

    An endless, laterally flexible and bendable belt conveyor particularly adapted for coal mining applications in facilitating the transport of the extracted coal up- or downslope and around corners in a continuous manner is disclosed. The conveying means includes a flat rubber belt reinforced along the middle portion thereof along which the major portion of the belt tension is directed so as to cause rotation of the tubular shaped belt when trammed around lateral turns thus preventing excessive belt bulging distortion between adjacent belt supports which would inhibit belt transport. Pretension induced into the fabric reinforced flat rubber belt by conventional belt take-up means supports the load conveyed when the belt conveyor is making lateral turns. The carrying and return portions of the belt are supported and formed into a tubular shape by a plurality of shapers positioned along its length. Each shaper is supported from above by a monorail and includes clusters of idler rollers which support the belt. Additional cluster rollers in each shaper permit the belt supporting roller clusters to rotate in response to the belt's operating tension imposed upon the cluster rollers by induced lateral belt friction forces. The freely rotating roller clusters thus permit the belt to twist on lateral curves without damage to itself while precluding escape of the conveyed material by effectively enclosing it in the tube-shaped, inner belt transport length.

  6. 28 CFR 25.56 - Responsibilities of junk yards and salvage yards and auto recyclers.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Responsibilities of junk yards and... Responsibilities of junk yards and salvage yards and auto recyclers. (a) By no later than March 31, 2009, and... of operating a junk yard or salvage yard within the United States shall provide, or cause to...

  7. Centronuclear myopathy in a Border collie dog.

    PubMed

    Eminaga, S; Cherubini, G B; Shelton, G D

    2012-10-01

    A two-year old, male entire Border collie was presented with a one-year history of exercise-induced collapsing on the pelvic limbs. Physical examination revealed generalised muscle atrophy. Neurological examination supported a generalised neuromuscular disorder. Electromyography revealed spontaneous electrical activity in almost all muscles. Unfixed and formaldehyde-fixed biopsy samples were collected from the triceps brachii, longissimus and vastus lateralis muscles. Histopathological, histochemical and ultrastructural examinations of biopsy specimens were consistent with either centronuclear or myotubular myopathy. The dog clinically improved with supportive treatment with L-carnitine, co-enzyme Q10 and vitamin B compound. To the authors' knowledge, this is the first report of centronuclear/myotubular myopathy in a Border collie. PMID:23013377

  8. Land border monitoring with remote sensing technologies

    NASA Astrophysics Data System (ADS)

    Malinowski, Radoslaw

    2010-09-01

    The remote sensing technology has many practical applications in different fields of science and industry. There is also a need to examine its usefulness for the purpose of land border surveillance. This research started with analysis of potential direct use of Earth Observation technology for monitoring migrations of people and preventing smuggling. The research, however, proved that there are still many fields within which the EO technology needs to be improved. From that point the analysis focused on improving Border Permeability Index which utilizes EO techniques as a source of information. The result of BPI analysis with use of high resolution data provides new kind of information which can support and make more effective work of authorities from security domain.

  9. Astronomers Without Borders: A Global Astronomy Community

    NASA Astrophysics Data System (ADS)

    Simmons, M.

    2011-10-01

    Astronomers Without Borders (AWB) brings together astronomy enthusiasts of all types - amateur astronomers, educators, professionals and "armchair" astronomers for a variety of online and physicalworld programs. The AWB web site provides social networking and a base for online programs that engage people worldwide in astronomy activities that transcend geopolitical and cultural borders. There is universal interest in astronomy, which has been present in all cultures throughout recorded history. Astronomy is also among the most accessible of sciences with the natural laboratory of the sky being available to people worldwide. There are few other interests for which people widely separated geographically can engage in activities involving the same objects. AWB builds on those advantages to bring people together. AWB also provides a platform where projects can reach a global audience. AWB also provides unique opportunities for multidisciplinary collaboration in EPO programs. Several programs including The World at Night, Global Astronomy Month and others will be described along with lessons learned.

  10. Cost effectiveness of recycling: A systems model

    SciTech Connect

    Tonjes, David J.; Mallikarjun, Sreekanth

    2013-11-15

    Highlights: • Curbside collection of recyclables reduces overall system costs over a range of conditions. • When avoided costs for recyclables are large, even high collection costs are supported. • When avoided costs for recyclables are not great, there are reduced opportunities for savings. • For common waste compositions, maximizing curbside recyclables collection always saves money. - Abstract: Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.

  11. High performance polyester concrete using recycled PET

    SciTech Connect

    Rebeiz, K.S.

    1995-10-01

    Recycled polyethylene terephthalate (PET) plastic wastes could be used in production of unsaturated polyester resins. In turn, these resins could be mixed with inorganic aggregates to produce polymer concrete (PC). Unsaturated polyesters based on recycled PET might be a potentially lower source cost of resins for producing useful PC based-products. The advantage of recycling PET in PC is that the PET materials do not have to be purified, including removal of colors, to the same extent as other PET recycling applications, which should facilitate the recycling operation and minimize its cost. The recycling of PET in PC could also help save energy and allow the long term disposal of the PET waste, an important advantage in recycling applications.

  12. Chiapas Forest, Mexico and Guatemala border

    NASA Technical Reports Server (NTRS)

    1990-01-01

    This color infrared view of the Chiapas Forest, Mexico and Guatemala border (17.0N, 92.0W) illustrates the usefulness of this type of film in determining vegetated vs non vegetated areas. As can be seen, most of this part of Guatemala remains in closed canopy woodland (dark red), while most of the Mexican land to the north has been cleared for pasture and farmland (pink). The pale green areas north of the river are bare soil or fallow fields.

  13. Culture as a Moving Symbolic Border.

    PubMed

    Simão, Lívia Mathias

    2016-03-01

    The aim of this paper is to propose the notion of culture as a symbolic moving border. Departing from both, Boesch's (1991) concept of culture as a symbolic field of action, and Herbst's (1995) co-genetic logic, I will discuss the dynamics of self-other relationships in terms of their potentiality as sources of movement in culture. A brief analysis of an empirical material is given in illustrative character of the ideas here exposed. PMID:26245862

  14. Vanadium recycling for fusion reactors

    SciTech Connect

    Dolan, T.J.; Butterworth, G.J.

    1994-04-01

    Very stringent purity specifications must be applied to low activation vanadium alloys, in order to meet recycling goals requiring low residual dose rates after 50--100 years. Methods of vanadium production and purification which might meet these limits are described. Following a suitable cooling period after their use, the vanadium alloy components can be melted in a controlled atmosphere to remove volatile radioisotopes. The aim of the melting and decontamination process will be the achievement of dose rates low enough for ``hands-on`` refabrication of new reactor components from the reclaimed metal. The processes required to permit hands-on recycling appear to be technically feasible, and demonstration experiments are recommended. Background information relevant to the use of vanadium alloys in fusion reactors, including health hazards, resources, and economics, is provided.

  15. DWPF recycle minimization: Brainstorming session

    SciTech Connect

    Jacobs, R.A.; Poirier, M.R.

    1993-10-12

    The recycle stream from the DWPF constitutes a major source of water addition to the High Level Waste evaporator system. As now designed, the entire flow of 3.5 to 6.5 gal/min (@ 25% and 75% attainment, respectively), or 2 gal/min during idling, flow to the 2H evaporator system (Tank 43). Substantial improvement in the HLW water balance and tank volume management is expected if the DWPF recycle to the HLW evaporator system can be significantly reduced. A task team has been appointed to study alternatives for reducing the flow to the HLW evaporator system and make recommendations for implementation and/or further study and evaluation. The brainstorming session detailed in this report was designed to produce the first cut options for the task team to further evaluate.

  16. Scrap car recycling in Taiwan

    SciTech Connect

    Lee, C.H.; Tai, H.S.; Fan, R.K.S.

    1997-12-31

    The official figure of registered automobiles released by the Ministry of Transportation of Taiwan, R.O.C. as of the end of April 1996, is approximately 4.8 millions. Among them, 18% of the cars are between seven and ten years old and 15% of the cars are old than ten years. The result of this large number of old cars is the problem of abandoned cars on the street of Taiwan. This phenomena not only hinders traffic flow but also undermines the living quality in the cities. To minimize these negative effects, EPA has promulgated a Scrap Motor Vehicles Management Regulation to enforce the scrap car recycling in Taiwan. Under this regulation, a buyer of a new vehicle has to pay the Scrap Motor Vehicle Disposal fee (NT$ 3000, or US$ 110 for a car; and NT$ 700, or US$ 25 for a motorcycle). This paper presents the current status of scrap car recycling in Taiwan.

  17. Infrared lateral shearing interferometers

    NASA Astrophysics Data System (ADS)

    Kwon, O.

    1980-04-01

    Recently IR interferometry has received much attention for its special capabilities of testing IR materials, diamond-turned metal mirrors, deep aspherics, unpolished rough surface optics, and other unconventional optics. A CW CO2 laser is used as a coherent light source at 10.6 microns, and germanium and zinc selenide optics are used for lenses and beam splitters. A pyroelectric vidicon (PEV) detects the modulated interference pattern through a TV monitor and video recorder-player. This paper presents three methods of IR lateral shear interferometry using (1) a germanium plane-parallel plate, (2) a Ronchi ruling, and (3) a double-grating lateral shear interferometer.

  18. Lateral Thinking of Prospective Teachers

    ERIC Educational Resources Information Center

    Lawrence, A. S. Arul; Xavier, S. Amaladoss

    2013-01-01

    Edward de Bono who invented the term "lateral thinking" in 1967 is the pioneer of lateral thinking. Lateral thinking is concerned with the generation of new ideas. Liberation from old ideas and the stimulation of new ones are twin aspects of lateral thinking. Lateral thinking is a creative skills from which all people can benefit…

  19. Slag recycling of irradiated vanadium

    SciTech Connect

    Gorman, P.K.

    1995-04-05

    An experimental inductoslag apparatus to recycle irradiated vanadium was fabricated and tested. An experimental electroslag apparatus was also used to test possible slags. The testing was carried out with slag materials that were fabricated along with impurity bearing vanadium samples. Results obtained include computer simulated thermochemical calculations and experimentally determined removal efficiencies of the transmutation impurities. Analyses of the samples before and after testing were carried out to determine if the slag did indeed remove the transmutation impurities from the irradiated vanadium.

  20. Ozone bleaching of recycled paper

    SciTech Connect

    Muguet, M.; Kogan, J. )

    1993-11-01

    Chlorinated bleaching chemicals, notably chlorine and hypochlorite, are still being used to bleach deinked, woodfree pulps. Increasing environmental concern about the use of these chemicals--coupled with the industry's efforts to increase the use of recycled fibers--highlight the need to develop better techniques for producing high-quality deinked pulp. Results presented in this report suggest that deinked fibers can be treated with ozone followed by a peroxide bleaching stage to produce a high-quality pulp.

  1. The structure of borders in a small world.

    PubMed

    Thiemann, Christian; Theis, Fabian; Grady, Daniel; Brune, Rafael; Brockmann, Dirk

    2010-01-01

    Territorial subdivisions and geographic borders are essential for understanding phenomena in sociology, political science, history, and economics. They influence the interregional flow of information and cross-border trade and affect the diffusion of innovation and technology. However, it is unclear if existing administrative subdivisions that typically evolved decades ago still reflect the most plausible organizational structure of today. The complexity of modern human communication, the ease of long-distance movement, and increased interaction across political borders complicate the operational definition and assessment of geographic borders that optimally reflect the multi-scale nature of today's human connectivity patterns. What border structures emerge directly from the interplay of scales in human interactions is an open question. Based on a massive proxy dataset, we analyze a multi-scale human mobility network and compute effective geographic borders inherent to human mobility patterns in the United States. We propose two computational techniques for extracting these borders and for quantifying their strength. We find that effective borders only partially overlap with existing administrative borders, and show that some of the strongest mobility borders exist in unexpected regions. We show that the observed structures cannot be generated by gravity models for human traffic. Finally, we introduce the concept of link significance that clarifies the observed structure of effective borders. Our approach represents a novel type of quantitative, comparative analysis framework for spatially embedded multi-scale interaction networks in general and may yield important insight into a multitude of spatiotemporal phenomena generated by human activity. PMID:21124970

  2. Scrap tire recycling in Minnesota

    SciTech Connect

    Not Available

    1989-10-01

    The author discusses the problems associated with scrap tires. For example, surface storing of scrap tires poses a fire hazard and the rainwater trapped in the tire casings is an ideal breeding ground for mosquitoes. Use as a fuel for energy production is unattractive as long as oil retails at its present low price. Past reclamation processes have not met expectations. Legislation alone is not the answer, because scrap tires cannot be regulated out of existence. However, the Minnesota state legislature has come up with an approach that seems to be successful. It has passed the Waste Tire Act, which not only formulates regulations but also provides funding for research and development. Thus, it has established a tire disposal fund for financing construction costs of tire recycling facilities. One of the outcomes was the construction of the St. Louis county Waste Tire Recycling Facility. Through a leasing arrangement with Minneapolis-based Rubber Elastomerics, Inc. (RRE), construction costs financed by the tire disposal fund eventually will be repaid by RRE to the fund. The arrangement is described in detail. By a process also described, RRE produces a product that can be used in thermoset and in thermoplastic compounds. The user can incorporate between 50 percent and 85 percent of the recycled product into a rubber or plastic compound without significantly affecting the physical properties of the compound.

  3. Deep water recycling through time

    PubMed Central

    Magni, Valentina; Bouilhol, Pierre; van Hunen, Jeroen

    2014-01-01

    We investigate the dehydration processes in subduction zones and their implications for the water cycle throughout Earth's history. We use a numerical tool that combines thermo-mechanical models with a thermodynamic database to examine slab dehydration for present-day and early Earth settings and its consequences for the deep water recycling. We investigate the reactions responsible for releasing water from the crust and the hydrated lithospheric mantle and how they change with subduction velocity (vs), slab age (a) and mantle temperature (Tm). Our results show that faster slabs dehydrate over a wide area: they start dehydrating shallower and they carry water deeper into the mantle. We parameterize the amount of water that can be carried deep into the mantle, W (×105 kg/m2), as a function of vs (cm/yr), a (Myrs), and Tm (°C):. We generally observe that a 1) 100°C increase in the mantle temperature, or 2) ∼15 Myr decrease of plate age, or 3) decrease in subduction velocity of ∼2 cm/yr all have the same effect on the amount of water retained in the slab at depth, corresponding to a decrease of ∼2.2×105 kg/m2 of H2O. We estimate that for present-day conditions ∼26% of the global influx water, or 7×108 Tg/Myr of H2O, is recycled into the mantle. Using a realistic distribution of subduction parameters, we illustrate that deep water recycling might still be possible in early Earth conditions, although its efficiency would generally decrease. Indeed, 0.5–3.7 × 108 Tg/Myr of H2O could still be recycled in the mantle at 2.8 Ga. Key Points Deep water recycling might be possible even in early Earth conditions We provide a scaling law to estimate the amount of H2O flux deep into the mantle Subduction velocity has a a major control on the crustal dehydration pattern PMID:26321881

  4. Management options for recycling radioactive scrap metals

    SciTech Connect

    Dehmel, J.C.; MacKinney, J.; Bartlett, J.

    1997-02-01

    The feasibility and advantages of recycling radioactive scrap metals (RSM) have yet to be assessed, given the unique technical, regulatory, safety, and cost-benefit issues that have already been raised by a concerned recycling industry. As is known, this industry has been repeatedly involved with the accidental recycling of radioactive sources and, in some cases, with costly consequences. If recycling were deemed to be a viable option, it might have to be implemented with regulatory monitoring and controls. Its implementation may have to consider various and complex issues and address the requirements and concerns of distinctly different industries. There are three basic options for the recycling of such scraps. They are: (1) recycling through the existing network of metal-scrap dealers and brokers, (2) recycling directly and only with specific steelmills, or (3) recycling through regional processing centers. Under the first option, scrap dealers and brokers would receive material from RSM generators and determine at which steelmills such scraps would be recycled. For the second option, RSM generators would deal directly with selected steelmills under specific agreements. For the third option, generators would ship scraps only to regional centers for processing and shipment to participating steelmills. This paper addresses the potential advantages of each option, identifies the types of arrangements that would need to be secured among all parties, and attempts to assess the receptivity of the recycling industry to each option.

  5. 9 CFR 130.6 - User fees for inspection of live animals at land border ports along the United States-Mexico border.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... animals at land border ports along the United States-Mexico border. 130.6 Section 130.6 Animals and Animal... User fees for inspection of live animals at land border ports along the United States-Mexico border. (a... importation into or entry into the United States through a land border port along the United...

  6. 9 CFR 130.6 - User fees for inspection of live animals at land border ports along the United States-Mexico border.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... animals at land border ports along the United States-Mexico border. 130.6 Section 130.6 Animals and Animal... User fees for inspection of live animals at land border ports along the United States-Mexico border. (a... importation into or entry into the United States through a land border port along the United...

  7. 9 CFR 130.6 - User fees for inspection of live animals at land border ports along the United States-Mexico border.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... animals at land border ports along the United States-Mexico border. 130.6 Section 130.6 Animals and Animal... User fees for inspection of live animals at land border ports along the United States-Mexico border. (a... importation into or entry into the United States through a land border port along the United...

  8. 9 CFR 130.6 - User fees for inspection of live animals at land border ports along the United States-Mexico border.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... animals at land border ports along the United States-Mexico border. 130.6 Section 130.6 Animals and Animal... User fees for inspection of live animals at land border ports along the United States-Mexico border. (a... importation into or entry into the United States through a land border port along the United...

  9. 9 CFR 130.6 - User fees for inspection of live animals at land border ports along the United States-Mexico border.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... animals at land border ports along the United States-Mexico border. 130.6 Section 130.6 Animals and Animal... User fees for inspection of live animals at land border ports along the United States-Mexico border. (a... importation into or entry into the United States through a land border port along the United...

  10. Rapid Plateau border size variations expected in three simple experiments on 2D liquid foams.

    PubMed

    Gay, C; Rognon, P; Reinelt, D; Molino, F

    2011-01-01

    Up to a global scaling, the geometry of foams squeezed between two solid plates (2D GG foams) essentially depends on two independent parameters: the liquid volume fraction and the degree of squeezing (bubble thickness to diameter ratio). We describe it in two main asymptotic regimes: fully dry floor tiles, where the Plateau border radius is smaller than the distance between the solid plates, and dry pancakes, where it is larger. We predict a rapid variation of the Plateau border radius in one part of the pancake regime, namely when the Plateau border radius is larger than the inter-plate distance but smaller than the geometric mean of that distance and the bubble perimeter. This rapid variation is not related to any topological change in the foam: in all the regimes we consider, the bubbles remain in mutual lateral contact through films located at mid-height between both plates. We provide asymptotic predictions in different types of experiments on such 2D GG foams: when foam is being progressively dried or wetted, when it is being squeezed further or stretched, when it coarsens through film breakage or through inter-bubble gas diffusion. Our analysis is restricted to configurations close to equilibrium, as we do not include stresses resulting from bulk viscous flow or from non-homogeneous surfactant concentrations. We also assume that the inter-plate distance is sufficiently small for gravity to be negligible. The present work does not provide a method for measuring small Plateau border radii experimentally, but it indicates that large (and easily observable) Plateau borders should appear or disappear rather suddenly in some types of experiments with small inter-plate gaps. It also gives expected orders of magnitude that should be helpful for designing experiments on 2D GG foams. PMID:21253804

  11. Border Malaria Associated with Multidrug Resistance on Thailand-Myanmar and Thailand-Cambodia Borders: Transmission Dynamic, Vulnerability, and Surveillance

    PubMed Central

    Bhumiratana, Adisak; Intarapuk, Apiradee; Sorosjinda-Nunthawarasilp, Prapa; Maneekan, Pannamas; Koyadun, Surachart

    2013-01-01

    This systematic review elaborates the concepts and impacts of border malaria, particularly on the emergence and spread of Plasmodium falciparum and Plasmodium vivax multidrug resistance (MDR) malaria on Thailand-Myanmar and Thailand-Cambodia borders. Border malaria encompasses any complex epidemiological settings of forest-related and forest fringe-related malaria, both regularly occurring in certain transmission areas and manifesting a trend of increased incidence in transmission prone areas along these borders, as the result of interconnections of human settlements and movement activities, cross-border population migrations, ecological changes, vector population dynamics, and multidrug resistance. For regional and global perspectives, this review analyzes and synthesizes the rationales pertaining to transmission dynamics and the vulnerabilities of border malaria that constrain surveillance and control of the world's most MDR falciparum and vivax malaria on these chaotic borders. PMID:23865048

  12. From collision to collaboration - Integrating informal recyclers and re-use operators in Europe: A review.

    PubMed

    Scheinberg, Anne; Nesić, Jelena; Savain, Rachel; Luppi, Pietro; Sinnott, Portia; Petean, Flaviu; Pop, Flaviu

    2016-09-01

    The European Union hosts some of the world's most developed waste management systems and an ambitious policy commitment to the circular economy. The existence of informal recycling and re-use activities in Europe has been vigorously denied until quite recently, and remains a very challenging subject for the European solid waste management sector, as well as for European government and private institutions. In countries ranging from Malta to Macedonia and from France to Turkey, informal recyclers excluded from legal recycling niches increasingly collide with formalised and controlled European Union approaches to urban waste management, packaging recovery schemes, formal re-use enterprises, and extended producer responsibility systems.This review focuses on the period from 2004 through the first half of 2016. The 78 sources on European (and neighbouring) informal recycling and re-use are contextualised with global sources and experience. The articles focus on informal recovery in and at the borders of the European Union, document the conflicts and collisions, and elaborate some constructive approaches towards legalisation, integration, and reconciliation. The overarching recommendation, to locate the issue of informal recovery and integration in the framework of the European circular economy package, is supported by four specific pillars of an integration strategy: Documentation, legalisation, occupational and enterprise recognition, and preparation for structural integration. PMID:27449318

  13. Borders as membranes :metaphors and models for improved policy in border regions.

    SciTech Connect

    Malczynski, Leonard A.; Passell, Howard David; Forster, Craig B.; Cockerill, Kristan

    2005-10-01

    Political borders are controversial and contested spaces. In an attempt to better understand movement along and through political borders, this project applied the metaphor of a membrane to look at how people, ideas, and things ''move'' through a border. More specifically, the research team employed this metaphor in a system dynamics framework to construct a computer model to assess legal and illegal migration on the US-Mexico border. Employing a metaphor can be helpful, as it was in this project, to gain different perspectives on a complex system. In addition to the metaphor, the multidisciplinary team utilized an array of methods to gather data including traditional literature searches, an experts workshop, a focus group, interviews, and culling expertise from the individuals on the research team. Results from the qualitative efforts revealed strong social as well as economic drivers that motivate individuals to cross the border legally. Based on the information gathered, the team concluded that legal migration dynamics were of a scope we did not want to consider hence, available demographic models sufficiently capture migration at the local level. Results from both the quantitative and qualitative data searches were used to modify a 1977 border model to demonstrate the dynamic nature of illegal migration. Model runs reveal that current US-policies based on neo-classic economic theory have proven ineffective in curbing illegal migration, and that proposed enforcement policies are also likely to be ineffective. We suggest, based on model results, that improvement in economic conditions within Mexico may have the biggest impact on illegal migration to the U.S. The modeling also supports the views expressed in the current literature suggesting that demographic and economic changes within Mexico are likely to slow illegal migration by 2060 with no special interventions made by either government.

  14. [Adult lateral meniscus].

    PubMed

    Beaufils, P; Hardy, P; Chambat, P; Clavert, P; Djian, P; Frank, A; Hulet, C; Potel, J-F; Verdonk, R

    2006-09-01

    Meniscal lesion does not mean meniscectomy and this is particularly true for the lateral meniscus. The reputation of mildness of the meniscectomy is usurped. The rate of joint space narrowing after lateral meniscectomy is of 40% at a follow-up of 13 years compared to 28% for the medial meniscus (symposium SFA 1996). Several arguments explain those results: biomechanical: the lateral meniscus contributes to the congruence; particularly the lateral meniscus is the zone where antero-posterior translational during knee flexion is 12 mm. The pejorative effects of lateral meniscectomy have conducted, more though to the medial meniscus, to the concept of meniscal economy. Lateral meniscectomy must be as partial as possible. Particularly, a discoid meniscus presenting a complete tear should be treated by a meniscoplasty in order to shape the meniscus in a more anatomic form than a total meniscectomy. Lateral meniscectomy is indicated in complex or horizontal cleavage, symptomatic, on stable knees. A particular case is the cyst of the lateral meniscus. It is a cystic subcutaneous formation, usual consequence of a horizontal cleaved meniscus of which the particularity is that it opens besides the articulation. The strategy must not consist in the isolated treatment of the cyst. This pathology should be addressed by an arthroscopic meniscectomy reaching the meniscosynovial junction at the level of the cyst. Meniscal repair must be proposed every time if possible. Criteria of reparability are better studied on MRI. Preoperatively MRI is the first choice radiological exam. Two essential indications can be held back: the vertical peripheral longitudinal lesion is on the non-vascularized area, and the horizontal cleaving of the junior athlete (if the cleaving remains purely intra meniscal). Meniscal repair is highly performed when the meniscal tear is associated to a rupture of the ACL (simultaneous reconstruction of the LCA). Postoperative outcome is different of that of a

  15. Lateral flow assays

    PubMed Central

    Koczula, Katarzyna M.

    2016-01-01

    Lateral flow assays (LFAs) are the technology behind low-cost, simple, rapid and portable detection devices popular in biomedicine, agriculture, food and environmental sciences. This review presents an overview of the principle of the method and the critical components of the assay, focusing on lateral flow immunoassays. This type of assay has recently attracted considerable interest because of its potential to provide instantaneous diagnosis directly to patients. The range and interpretation of results and parameters used for evaluation of the assay will also be discussed. The main advantages and disadvantages of LFAs will be summarized and relevant future improvements to testing devices and strategies will be proposed. Finally, the major recent advances and future diagnostic applications in the LFA field will be explored. PMID:27365041

  16. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect

    Kooda, Kevin Evan; Mc Cray, Casey William; Aitken, Darren William; Galloway, Kelly

    2003-02-01

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  17. INEEL Lead Recycling in a Moratorium Environment

    SciTech Connect

    Kooda, K. E.; Galloway, K.; McCray, C. W.; Aitken, D. W.

    2003-02-26

    Since 1999, the Idaho National Engineering and Environmental Laboratory (INEEL) Lead Project successfully recycled over 700,000 pounds of excess INEEL lead to the private sector. On February 14, 2000, the Secretary of Energy, Bill Richardson, formalized the January 12, 2000, moratorium on recycling radioactive scrap metal that prevented the unrestricted release of recycled scrap metals to the private sector. This moratorium created significant problems for the INEEL lead recycling program and associated plans; however, through the cooperative efforts of the INEEL and Idaho State University as well as innovative planning and creative thinking the recycling issues were resolved. This collaboration has recycled over 160,000 pounds of excess lead to Idaho State University with a cost savings of over $.5M.

  18. Pathways and mechanisms of endocytic recycling

    PubMed Central

    Grant, Barth D.; Donaldson, Julie G.

    2011-01-01

    Endocytic recycling is coordinated with endocytic uptake to control the composition of the plasma membrane. Although much of our understanding of endocytic recycling has come from studies on the transferrin receptor, a protein internalized through clathrin-dependent endocytosis, increased interest in clathrin-independent endocytosis has led to the discovery of new endocytic recycling systems. Recent insights into the regulatory mechanisms that control endocytic recycling have focused on recycling through tubular carriers and the return to the cell surface of cargo that enters cells through clathrin-independent mechanisms. Recent work emphasizes the importance of regulated recycling in such diverse processes as cytokinesis, cell adhesion and morphogenesis, cell fusion, and learning and memory. PMID:19696797

  19. Xerox's closed recycling loop still contains kinks

    SciTech Connect

    Not Available

    1995-02-01

    Xerox Corp. has established a recycling loop for plastics screw-top toner bottles and dry-ink containers used in most of the company's high-volume copiers. However, a severe shortage of post-consumer recycled plastic has been short-circuiting Xerox's good intentions. Last year, the Stamford, Conn.-based company stopped manufacturing toner containers from virgin plastics and instead began using recycled raw materials, such as discarded milk and water jugs collected from municipal curbside recycling programs. The bottles are ground and remolded into such products as air filters for vacuum cleaners, plastic lumber, compost bins, landscape ties, benches and fence posts. However, what sounds like a win-win situation actually is costing too much money. Contrary to popular belief, post-consumer recycled plastic costs more than virgin plastic. Despite the added expense, Xerox will continue to use recycled plastics when possible.

  20. Conjugal amyotrophic lateral sclerosis

    PubMed Central

    Dewitt, John D.; Kwon, Julia; Burton, Rebecca

    2012-01-01

    Amyotrophic lateral sclerosis (ALS) is a disease characterized by progressive degeneration of motor neurons in the motor cortex, brainstem, and spinal cord. The incidence of sporadic ALS is 1.5 to 2.7 in 100,000, and the prevalence is 5.2 to 6.0 in 100,000. Conjugal ALS is even rarer than sporadic ALS. We report a case of conjugal ALS encountered in our outpatient neurology clinic. PMID:22275781

  1. Hemispheric lateralization in reasoning.

    PubMed

    Turner, Benjamin O; Marinsek, Nicole; Ryhal, Emily; Miller, Michael B

    2015-11-01

    A growing body of evidence suggests that reasoning in humans relies on a number of related processes whose neural loci are largely lateralized to one hemisphere or the other. A recent review of this evidence concluded that the patterns of lateralization observed are organized according to two complementary tendencies. The left hemisphere attempts to reduce uncertainty by drawing inferences or creating explanations, even at the cost of ignoring conflicting evidence or generating implausible explanations. Conversely, the right hemisphere aims to reduce conflict by rejecting or refining explanations that are no longer tenable in the face of new evidence. In healthy adults, the hemispheres work together to achieve a balance between certainty and consistency, and a wealth of neuropsychological research supports the notion that upsetting this balance results in various failures in reasoning, including delusions. However, support for this model from the neuroimaging literature is mixed. Here, we examine the evidence for this framework from multiple research domains, including an activation likelihood estimation analysis of functional magnetic resonance imaging studies of reasoning. Our results suggest a need to either revise this model as it applies to healthy adults or to develop better tools for assessing lateralization in these individuals. PMID:26426534

  2. Minerals yearbook, 1992: Materials recycling. Annual report

    SciTech Connect

    Tanner, A.O.

    1992-01-01

    A large variety of materials are recycled by different sectors of our society. The materials recycling that is mainly addressed in this writing is from waste that is generated after manufacturing and use. Included is recycling that is generally more obvious to the public: the collection, reprocessing, and remanufacture of materials into new products from post-consumer UBC's, scrap metal, glass containers, paper goods, increasingly plastics, as well as rubber tires and other used goods.

  3. Probing endocytosis from the enterocyte brush border using fluorescent lipophilic dyes: lipid sorting at the apical cell surface.

    PubMed

    Danielsen, E Michael

    2015-05-01

    The small intestinal brush border is a specialized cell membrane that needs to withstand the solubilizing effect of bile salts during assimilation of dietary nutrients and to achieve detergent resistance; it is highly enriched in glycolipids organized in lipid raft microdomains. In the present work, the fluorescent lipophilic probes FM 1-43 (N-(3-triethylammoniumpropyl)-4-(4-(dibutylamino)styryl)pyridinium dibromide), FM 4-64 (N-(3-triethylammoniumpropyl)-4-(6-(4-(diethylamino) phenyl)hexatrienyl)pyridinium dibromide), TMA-DPH (1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene p-toluenesulfonate), and CellMask Orange plasma membrane stain were used to study endocytosis from the enterocyte brush border of organ-cultured porcine mucosal explants. All the dyes readily incorporated into the brush border but were not detectably endocytosed by 5 min, indicating a slow uptake compared with other cell types. At later time points, FM 1-43 clearly appeared in distinct punctae in the terminal web region, previously shown to represent early endosomes (TWEEs). In contrast, the other dyes were relatively "endocytosis resistant" to varying degrees for periods up to 2 h, indicating an active sorting of lipids in the brush border prior to internalization. For some of the dyes, a diphenylhexatriene motif in the lipophilic tail seemed to confer the relative endocytosis resistance. Lipid sorting by selective endocytosis therefore may be a process in the enterocytes aimed to generate and maintain a unique lipid composition in the brush border. PMID:25526697

  4. Influenza A virus recycling revisited.

    PubMed Central

    Dowdle, W. R.

    1999-01-01

    Current textbooks link influenza pandemics to influenza A virus subtypes H2 (1889-91), H3 (1990), H1 (1918-20), H2 (1957-58) and H3 (1968), a pattern suggesting subtype recycling in humans. Since H1 reappeared in 1977, whatever its origin, some workers feel that H2 is the next pandemic candidate. This report reviews the publications on which the concept of influenza A virus subtype recycling is based and concludes that the data are inconsistent with the purported sequence of events. The three influenza pandemics prior to 1957-58 were linked with subtypes through retrospective studies of sera from the elderly, or through seroarchaeology. The pandemic seroarchaeological model for subtype H1 has been validated by the recent recovery of swine virus RNA fragments from persons who died from influenza in 1918. Application of the model to pre-existing H3 antibody among the elderly links the H3 subtype to the pandemic of 1889-91, not that of 1900 as popularly quoted. Application of the model to pre-existing H2 antibody among the elderly fails to confirm that this subtype caused a pandemic in the late 1800's, a finding which is consistent with age-related excess mortality patterns during the pandemics of 1957 (H2) and 1968 (H3). H2 variants should be included in pandemic planning for a number of reasons, but not because of evidence of recycling. It is not known when the next pandemic will occur or which of the 15 (or more) haemagglutinin subtypes will be involved. Effective global surveillance remains the key to influenza preparedness. PMID:10593030

  5. BP details new recycling process

    SciTech Connect

    Chynoweth, E.

    1992-04-22

    BP Chemicals (London) is developing a preprocessing thermal cracker for recycling mixed plastics waste as an add-on to existing petrochemicals or refinery complexes. The company is currently discussing the technology with other plastic producers to {open_quotes}move forward together,{close_quotes} say Serge Huybrechts, branch R&D manager at BP Chemicals at Grangemouth. He says the unit would be able to deliver an intermediate feed of similar composition to chemical naphtha for chemical or refinery processes including steam cracking, catalytic cracking, coking, gasification, and hydrocracking. In comparison, pyrolysis gives a range of products, from light gas to heavy aromatics, that are difficult to integrate into existing equipment.

  6. Precipitation recycling in the Amazon basin

    NASA Technical Reports Server (NTRS)

    Eltahir, E. A. B.; Bras, R. L.

    1994-01-01

    Precipitation recycling is the contribution of evaporation within a region to precipitation in that same region. The recycling rate is a diagnostic measure of the potential for interactions between land surface hydrology and regional climate. In this paper we present a model for describing the seasonal and spatial variability of the recycling process. The precipitation recycling ratio, rho, is the basic variable in describing the recycling process. Rho is the fraction of precipitation at a certain location and time which is contributed by evaporation within the region under study. The recycling model is applied in studyiing the hydrologic cycle in the Amazon basin. It is estimated that about 25% of all the rain that falls in the Amazon basin is contributed by evaporation within the basin. This estimate is based on analysis of a data set supplied by the European Centre for Medium-range Weather Forecasts (ECMWF). The same analysis is repeated using a different data set from the Geophysical Fluid Dynamics Laboratory (GFDL). Based on this data set, the recycling ratio is estimated to be 35%. The seasonal variability of the recycling ratio is small compared with the yearly average. The new estimates of the recycling ratio are compared with results of previous studies, and the differences are explained.

  7. Gold recycling; a materials flow study

    USGS Publications Warehouse

    Amey, Earle B.

    2000-01-01

    This materials flow study includes a description of trends in consumption, loss, and recycling of gold-containing materials in the United States in 1998 in order to illustrate the extent to which gold is presently being recycled and to identify recycling trends. The quantity of gold recycled, as a percent of the apparent supply of gold, was estimated to be about 30 percent. Of the approximately 446 metric tons of gold refined in the United States in 1998, the fabricating and industrial use losses were 3 percent.

  8. Recycling policy in the european union

    NASA Astrophysics Data System (ADS)

    Gaballah, I.; Kanari, N.

    2001-11-01

    Recycling in the European Union (EU) has benefited from R&D efforts and strict environmental regulations of the EU’s members. Thanks to the adoption of sustainable development policies by the EU’s European Institutions, economic incentives are expected to further strengthen the recycling industry. Moreover, the historical accumulation of non-ferrous metals in Europe will likely enhance secondary metal production. Also contributing to EU recycling is mining in East European countries and the resulting industrial waste. The rate of growth of the recycling industry is expected to approach double digits for at least this decade.

  9. Fermilab recycler stochastic cooling commissioning and performance

    SciTech Connect

    D. Broemmelsiek; Ralph Pasquinelli

    2003-06-04

    The Fermilab Recycler is a fixed 8 GeV kinetic energy storage ring located in the Fermilab Main Injector tunnel near the ceiling. The Recycler has two roles in Run II. First, to store antiprotons from the Fermilab Antiproton Accumulator so that the antiproton production rate is no longer compromised by large numbers of antiprotons stored in the Accumulator. Second, to receive antiprotons from the Fermilab Tevatron at the end of luminosity periods. To perform each of these roles, stochastic cooling in the Recycler is needed to preserve and cool antiprotons in preparation for transfer to the Tevatron. The commissioning and performance of the Recycler stochastic cooling systems will be reviewed.

  10. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--QUESTIONNAIRES (ENGLISH AND SPANISH FORMAT)

    EPA Science Inventory

    The questionnaires used for the Arizona Border Study were prepared in English and Spanish formats. The Spanish format of the questionnaires was translated, back-translated, and tested on a group of local Spanish speakers with a goal of providing a translation in colloquial Spanis...

  11. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--LIST OF STANDARD OPERATING PROCEDURES

    EPA Science Inventory

    This document lists available protocols and SOPs for the U.S.-Mexico Border Program study. It identifies protocols and SOPs for the following study components: (1) Sample collection and field operations, (2) Sample analysis, (3) General laboratory procedures, (4) Quality Assuranc...

  12. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--METALS IN HAIR ANALYTICAL RESULTS

    EPA Science Inventory

    The Metals in Hair data set contains the analytical results for measurements of mercury(CAS # 7439-97-6) collected from 40 of the 86 primary household residents (IRN=01) in the Arizona Border Survey. A hair sample was collected from the occipital region of the participant's head...

  13. Energy return on investment of used nuclear fuel recycling

    Energy Science and Technology Software Center (ESTSC)

    2011-08-31

    N-EROI calculates energy return on investment (EROI) for recycling of used nublear fuel in four scenarios: one-pass recycle in light water reactors; two-pass recycle in light water reactors; mulit-pass recycle in burner fast reactora; one-pass recycle in breeder fast reactors.

  14. Sorting Recycled Trash: An Activity for Earth Day 2007

    ERIC Educational Resources Information Center

    Harris, Mary E.; Harris, Harold H.

    2007-01-01

    Middle or high school students celebrate Earth Day on April 22, 2007 by participating in the activity to separate commingled recyclable trash to simulate sorting in a recycling center. Students would gain an appreciation for recyclable trash, after it is taken to a recycling center and learn about properties of recyclables.

  15. Evaluation of Border Entry Screening for Infectious Diseases in Humans

    PubMed Central

    Antão, Catarina; Hall, Robert

    2015-01-01

    In response to the severe acute respiratory syndrome (SARS) pandemic of 2003 and the influenza pandemic of 2009, many countries instituted border measures as a means of stopping or slowing the spread of disease. The measures, usually consisting of a combination of border entry/exit screening, quarantine, isolation, and communications, were resource intensive, and modeling and observational studies indicate that border screening is not effective at detecting infectious persons. Moreover, border screening has high opportunity costs, financially and in terms of the use of scarce public health staff resources during a time of high need. We discuss the border-screening experiences with SARS and influenza and propose an approach to decision-making for future pandemics. We conclude that outbreak-associated communications for travelers at border entry points, together with effective communication with clinicians and more effective disease control measures in the community, may be a more effective approach to the international control of communicable diseases. PMID:25625224

  16. Recycle Alaska: Reduce, Reuse, Recycle. Activities Handbook, Teacher's Guide, and Student Worksheets.

    ERIC Educational Resources Information Center

    Alaska State Dept. of Education, Juneau.

    Recycling is a very important aspect of conserving the environment for future generations. This guide addresses the topic of litter prevention for the Alaskan environment and contains 42 activities. Activity topics covered include Natural Cycles, Human Interruption of Natural Cycles, Reduce, Reuse, Recycle and Recycled Classroom. Grade level,…

  17. Seismicity at Jalisco-Nayarit Border, Mexico

    NASA Astrophysics Data System (ADS)

    Rutz, M.; Nunez-Cornu, F.; Camarena, M.; Trejo, E.; Reyes-Davila, G.; Suarez-Plasencia, C.

    2003-12-01

    Since 2002 a regional seismic network from Jalisco Civil Defense and University of Guadalalajara is monitoring seismicity at the northwest border of Jalisco block. With the installation of a seismic station on Ceboruco Volcano, by Nayarit Civil Defense, coverage of the network extends to east. Ceboruco Volcano is located on the Tepic-Zacoalco graben, the east border of Jalisco block, this allow us to begin to monitoring this area. The zone of Bahia de Banderas, between the north coast of Jalisco and south coast of Nayarit, probably on a tectonic triple point, is a region of high seismic potential. Activ tectonic structures and clusters in the zone of El Tuito and the Dam Cajon de Pe¤as have been identified. The seismicity in the north area of the bay is low, meanwhile in the south, where the bay is deeper, the seismicity level is higher with an East-West tendency. At the east, the Amatlan de Ca¤as-Ameca zone presents continue activity, here have been possible to locate events with local magnitude between 2 and 4. Tectonovolcanic events registred at Ceboruco station presents waveform with scattering. The seismic distribution of the coast of Jalisco shows parallel alignments to the trench throughout al the coast. Other perpendicular alignments to the coastline show active morphologic structures within the Jalisco block related to the subduction of the Rivera plate under the Jalisco block.

  18. Beneficial insect borders provide northern bobwhite brood habitat.

    PubMed

    Moorman, Christopher E; Plush, Charles J; Orr, David B; Reberg-Horton, Chris

    2013-01-01

    Strips of fallow vegetation along cropland borders are an effective strategy for providing brood habitat for declining populations of upland game birds (Order: Galliformes), including northern bobwhite (Colinus virginianus), but fallow borders lack nectar-producing vegetation needed to sustain many beneficial insect populations (e.g., crop pest predators, parasitoids, and pollinator species). Planted borders that contain mixes of prairie flowers and grasses are designed to harbor more diverse arthropod communities, but the relative value of these borders as brood habitat is unknown. We used groups of six human-imprinted northern bobwhite chicks as a bioassay for comparing four different border treatments (planted native grass and prairie flowers, planted prairie flowers only, fallow vegetation, or mowed vegetation) as northern bobwhite brood habitat from June-August 2009 and 2010. All field border treatments were established around nine organic crop fields. Groups of chicks were led through borders for 30-min foraging trials and immediately euthanized, and eaten arthropods in crops and gizzards were measured to calculate a foraging rate for each border treatment. We estimated arthropod prey availability within each border treatment using a modified blower-vac to sample arthropods at the vegetation strata where chicks foraged. Foraging rate did not differ among border treatments in 2009 or 2010. Total arthropod prey densities calculated from blower-vac samples did not differ among border treatments in 2009 or 2010. Our results showed plant communities established to attract beneficial insects should maximize the biodiversity potential of field border establishment by providing habitat for beneficial insects and young upland game birds. PMID:24376759

  19. Beneficial Insect Borders Provide Northern Bobwhite Brood Habitat

    PubMed Central

    Moorman, Christopher E.; Plush, Charles J.; Orr, David B.; Reberg-Horton, Chris

    2013-01-01

    Strips of fallow vegetation along cropland borders are an effective strategy for providing brood habitat for declining populations of upland game birds (Order: Galliformes), including northern bobwhite (Colinus virginianus), but fallow borders lack nectar-producing vegetation needed to sustain many beneficial insect populations (e.g., crop pest predators, parasitoids, and pollinator species). Planted borders that contain mixes of prairie flowers and grasses are designed to harbor more diverse arthropod communities, but the relative value of these borders as brood habitat is unknown. We used groups of six human-imprinted northern bobwhite chicks as a bioassay for comparing four different border treatments (planted native grass and prairie flowers, planted prairie flowers only, fallow vegetation, or mowed vegetation) as northern bobwhite brood habitat from June-August 2009 and 2010. All field border treatments were established around nine organic crop fields. Groups of chicks were led through borders for 30-min foraging trials and immediately euthanized, and eaten arthropods in crops and gizzards were measured to calculate a foraging rate for each border treatment. We estimated arthropod prey availability within each border treatment using a modified blower-vac to sample arthropods at the vegetation strata where chicks foraged. Foraging rate did not differ among border treatments in 2009 or 2010. Total arthropod prey densities calculated from blower-vac samples did not differ among border treatments in 2009 or 2010. Our results showed plant communities established to attract beneficial insects should maximize the biodiversity potential of field border establishment by providing habitat for beneficial insects and young upland game birds. PMID:24376759

  20. Estimation of continental precipitation recycling

    NASA Technical Reports Server (NTRS)

    Brubaker, Kaye L.; Entekhabi, Dara; Eagleson, P. S.

    1993-01-01

    The total amount of water that precipitates on large continental regions is supplied by two mechanisms: 1) advection from the surrounding areas external to the region and 2) evaporation and transpiration from the land surface within the region. The latter supply mechanism is tantamount to the recycling of precipitation over the continental area. The degree to which regional precipitation is supplied by recycled moisture is a potentially significant climate feedback mechanism and land surface-atmosphere interaction, which may contribute to the persistence and intensification of droughts. Gridded data on observed wind and humidity in the global atmosphere are used to determine the convergence of atmospheric water vapor over continental regions. A simplified model of the atmospheric moisture over continents and simultaneous estimates of regional precipitation are employed to estimate, for several large continental regions, the fraction of precipitation that is locally derived. The results indicate that the contribution of regional evaporation to regional precipitation varies substantially with location and season. For the regions studied, the ratio of locally contributed to total monthly precipitation generally lies between 0. 10 and 0.30 but is as high as 0.40 in several cases.

  1. Nanochannel Based Single Molecule Recycling

    PubMed Central

    Lesoine, John F.; Venkataraman, Prahnesh A.; Maloney, Peter C.; Dumont, Mark

    2012-01-01

    We present a method for measuring the fluorescence from a single molecule hundreds of times without surface immobilization. The approach is based on the use of electroosmosis to repeatedly drive a single target molecule in a fused silica nanochannel through a stationary laser focus. Single molecule fluorescence detected during the transit time through the laser focus is used to repeatedly reverse the electrical potential controlling the flow direction. Our method does not rely on continuous observation and therefore is less susceptible to fluorescence blinking than existing fluorescence-based trapping schemes. The variation in the turnaround times can be used to measure the diffusion coefficient on a single molecule level. We demonstrate the ability to recycle both proteins and DNA in nanochannels and show that the procedure can be combined with single-pair Förster energy transfer. Nanochannel-based single molecule recycling holds promise for studying conformational dynamics on the same single molecule in solution and without surface tethering. PMID:22662745

  2. Integrated Recycling Test Fuel Fabrication

    SciTech Connect

    R.S. Fielding; K.H. Kim; B. Grover; J. Smith; J. King; K. Wendt; D. Chapman; L. Zirker

    2013-03-01

    The Integrated Recycling Test is a collaborative irradiation test that will electrochemically recycle used light water reactor fuel into metallic fuel feedstock. The feedstock will be fabricated into a metallic fast reactor type fuel that will be irradiation tested in a drop in capsule test in the Advanced Test Reactor on the Idaho National Laboratory site. This paper will summarize the fuel fabrication activities and design efforts. Casting development will include developing a casting process and system. The closure welding system will be based on the gas tungsten arc burst welding process. The settler/bonder system has been designed to be a simple system which provides heating and controllable impact energy to ensure wetting between the fuel and cladding. The final major pieces of equipment to be designed are the weld and sodium bond inspection system. Both x-radiography and ultrasonic inspection techniques have been examine experimentally and found to be feasible, however the final remote system has not been designed. Conceptual designs for radiography and an ultrasonic system have been made.

  3. Recycling of typical supercapacitor materials.

    PubMed

    Vermisoglou, Eleni C; Giannouri, Maria; Todorova, Nadia; Giannakopoulou, Tatiana; Lekakou, Constantina; Trapalis, Christos

    2016-04-01

    A simple, facile and low-cost method for recycling of supercapacitor materials is proposed. This process aims to recover some fundamental components of a used supercapacitor, namely the electrolyte salt tetraethyl ammonium tetrafluoroborate (TEABF4) dissolved in an aprotic organic solvent such as acetonitrile (ACN), the carbonaceous material (activated charcoal, carbon nanotubes) purified, the current collector (aluminium foil) and the separator (paper) for further utilization. The method includes mechanical shredding of the supercapacitor in order to reduce its size, and separation of aluminium foil and paper from the carbonaceous resources containing TEABF4 by sieving. The extraction of TEABF4 from the carbonaceous material was based on its solubility in water and subsequent separation through filtering and distillation. A cyclic voltammetry curve of the recycled carbonaceous material revealed supercapacitor behaviour allowing a potential reutilization. Furthermore, as BF4(-) stemming from TEABF4 can be slowly hydrolysed in an aqueous environment, thus releasing F(-) anions, which are hazardous, we went on to their gradual trapping with calcium acetate and conversion to non-hazardous CaF2. PMID:26862148

  4. Tritium recycling (processing) facility design

    SciTech Connect

    Metzler, J.; Le, T.

    1995-10-01

    The maintenance of a nuclear weapons capability requires the periodic replacement of tritium contained in each of the weapons in the nuclear weapons stockpile because the radioactive decay of tritium reduces its quantity by about 5.5 percent per year. The Tritium Recycling Plant (TRP) performs the activities necessary to recover, purify, and recycle tritium returned from the field. Tritium is contained in vessels called reservoirs. The TRP also has the capability to conduct environmental tests to ensure the reliability and quality of the reservoirs. Currently, the U.S. has no source of new tritium. The proposed new TRP is an option the U.S. Department of Energy (U.S. DOE) is considering that could be collocated with the new Tritium Supply Plant if it is built at Oak Ridge, Pantex, Nevada Test Site, or Idaho National Engineering Laboratory. It will comply with applicable environment, safety and health, (ES&H) regulations and orders. If the new Tritium Supply Plant is built at the Savannah River Site, the existing TRP would be upgraded, as necessary. 3 refs., 4 figs.

  5. Live Imaging of Border Cell Migration in Drosophila.

    PubMed

    Dai, Wei; Montell, Denise J

    2016-01-01

    Border cells are a cluster of cells that migrate from the anterior tip of the Drosophila egg chamber to the border of the oocyte in stage 9. They serve as a useful model to study collective cell migration in a native tissue environment. Here we describe a protocol for preparing ex vivo egg chamber cultures from transgenic flies expressing fluorescent proteins in the border cells, and using confocal microscopy to take a multi-positional time-lapse movie. We include an image analysis method for tracking border cell cluster dynamics as well as tracking individual cell movements. PMID:27271901

  6. Lateral Lumbar Interbody Fusion

    PubMed Central

    Hughes, Alexander; Girardi, Federico; Sama, Andrew; Lebl, Darren; Cammisa, Frank

    2015-01-01

    The lateral lumbar interbody fusion (LLIF) is a relatively new technique that allows the surgeon to access the intervertebral space from a direct lateral approach either anterior to or through the psoas muscle. This approach provides an alternative to anterior lumbar interbody fusion with instrumentation, posterior lumbar interbody fusion, and transforaminal lumbar interbody fusion for anterior column support. LLIF is minimally invasive, safe, better structural support from the apophyseal ring, potential for coronal plane deformity correction, and indirect decompression, which have has made this technique popular. LLIF is currently being utilized for a variety of pathologies including but not limited to adult de novo lumbar scoliosis, central and foraminal stenosis, spondylolisthesis, and adjacent segment degeneration. Although early clinical outcomes have been good, the potential for significant neurological and vascular vertebral endplate complications exists. Nevertheless, LLIF is a promising technique with the potential to more effectively treat complex adult de novo scoliosis and achieve predictable fusion while avoiding the complications of traditional anterior surgery and posterior interbody techniques. PMID:26713134

  7. Lateral Lumbar Interbody Fusion.

    PubMed

    Pawar, Abhijit; Hughes, Alexander; Girardi, Federico; Sama, Andrew; Lebl, Darren; Cammisa, Frank

    2015-12-01

    The lateral lumbar interbody fusion (LLIF) is a relatively new technique that allows the surgeon to access the intervertebral space from a direct lateral approach either anterior to or through the psoas muscle. This approach provides an alternative to anterior lumbar interbody fusion with instrumentation, posterior lumbar interbody fusion, and transforaminal lumbar interbody fusion for anterior column support. LLIF is minimally invasive, safe, better structural support from the apophyseal ring, potential for coronal plane deformity correction, and indirect decompression, which have has made this technique popular. LLIF is currently being utilized for a variety of pathologies including but not limited to adult de novo lumbar scoliosis, central and foraminal stenosis, spondylolisthesis, and adjacent segment degeneration. Although early clinical outcomes have been good, the potential for significant neurological and vascular vertebral endplate complications exists. Nevertheless, LLIF is a promising technique with the potential to more effectively treat complex adult de novo scoliosis and achieve predictable fusion while avoiding the complications of traditional anterior surgery and posterior interbody techniques. PMID:26713134

  8. Creativity in later life.

    PubMed

    Price, K A; Tinker, A M

    2014-08-01

    The ageing population presents significant challenges for the provision of social and health services. Strategies are needed to enable older people to cope within a society ill prepared for the impacts of these demographic changes. The ability to be creative may be one such strategy. This review outlines the relevant literature and examines current public health policy related to creativity in old age with the aim of highlighting some important issues. As well as looking at the benefits and negative aspects of creative activity in later life they are considered in the context of the theory of "successful ageing". Creative activity plays an important role in the lives of older people promoting social interaction, providing cognitive stimulation and giving a sense of self-worth. Furthermore, it is shown to be useful as a tool in the multi-disciplinary treatment of health problems common in later life such as depression and dementia. There are a number of initiatives to encourage older people to participate in creative activities such as arts-based projects which may range from visual arts to dance to music to intergenerational initiatives. However, participation shows geographical variation and often the responsibility of provision falls to voluntary organisations. Overall, the literature presented suggests that creative activity could be a useful tool for individuals and society. However, further research is needed to establish the key factors which contribute to patterns of improved health and well-being, as well as to explore ways to improve access to services. PMID:24974278

  9. Recycling Today Makes for a Better Tomorrow.

    ERIC Educational Resources Information Center

    Raze, Robert E., Jr.

    1992-01-01

    Today's children must be educated about solid waste management and recycling to reduce the amount of waste that goes into landfills. The article describes what can be recycled (newspapers, corrugated cardboard, paper, glass, aluminum, textiles, motor oil, organic wastes, appliances, steel cans, and plastics). It also lists student environment…

  10. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    EPA Science Inventory

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. wo processing technologies were used to prepare wood-plastic composites: air-laying and melt-...

  11. Argonne National Laboratory's Recycling Pilot Plant

    SciTech Connect

    Spangenberger, Jeff; Jody, Sam

    2009-01-01

    Argonne has a Recycling Pilot Plant designed to save the non-metal portions of junked cars. Here, program managers demonstrate how plastic shredder residue can be recycled. (Currently these automotive leftovers are sent to landfills.) For more information, visit Argonne's Transportation Technology R&D Center Web site at http://www.transportation.anl.gov.

  12. Idea Notebook: Recycling with an Educational Purpose.

    ERIC Educational Resources Information Center

    Gerth, Tom; Wilson, David A.

    1986-01-01

    Four students at St. Louis University High School developed a project to clean up the environment while saving energy and natural resources. Aluminum and steel cans were recycled and the money was used to buy and plant trees. Students learned about recycling, organization, money management, and improving the environment. (JMM)

  13. Economic feasibility of recycling radioactive scrap steel

    SciTech Connect

    Balhiser, B.C.; Rosholt, D.L.; Nichols, F.A.

    1995-12-31

    Radioactive scrap metal has traditionally been disposed of by burial in low-level waste repositories, an option that will become increasingly unattractive if burial costs rise as projected. This paper will examine recycling opportunities that may arise from two divergent economic trends: (1) escalating burial costs, and (2) historically flat product costs from state-of-the-art metal recycle operations. Emphasis will be placed on recycling the radioactive scrap steel (RSS) that will arise from D&D of Government and commercial nuclear facilities in the western United States. An effort is underway to compare processes for recycling RSS at least cost to the generator, least impact to the environment, and minimum worker exposure to radionuclide hazards. An experienced industry team with expertise in radioactive metals recycling, commercial steel recycling, and state-of-the-art metal recycle facilities design has been assembled under subcontract for this purpose. Methods for evaluating process options to arrive at an optimized solution will be discussed in the paper. An analysis of burial versus recycle costs for RSS will also be presented.

  14. Argonne National Laboratory's Recycling Pilot Plant

    ScienceCinema

    Spangenberger, Jeff; Jody, Sam;

    2013-04-19

    Argonne has a Recycling Pilot Plant designed to save the non-metal portions of junked cars. Here, program managers demonstrate how plastic shredder residue can be recycled. (Currently these automotive leftovers are sent to landfills.) For more information, visit Argonne's Transportation Technology R&D Center Web site at http://www.transportation.anl.gov.

  15. Sustainability and the Recycling of Words

    ERIC Educational Resources Information Center

    Miller, Donna L.; Nilsen, Alleen Pace

    2011-01-01

    With the mention of "sustainability" and "recycling," most people think about reusing paper, plastic, metal, and glass, but what the authors discovered when they embarked on a word-study unit is that the sustainability movement has also brought about the recycling of words. The authors were team-teaching a language awareness class taken by…

  16. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    EPA Science Inventory

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  17. Pedagogical Recycling: How Colleagues Change Colleagues' Minds

    ERIC Educational Resources Information Center

    O'Donnell-Allen, Cindy

    2005-01-01

    A teacher-researcher uses the metaphor of recycling along a continuum to describe how teachers adapt the ideas of their colleagues with varying degrees of change based on their different contexts. The objective of recycling is not only to reduce waste but also to extend use and the key to lasting changes in mind is sustained participation in…

  18. Recycling Primer: Getting Back to Basics.

    ERIC Educational Resources Information Center

    Connecticut State Dept. of Environmental Protection, Hartford.

    The disposal of garbage is a complex issue. Four strategies have been developed to attack the problem. They deal with: (1) waste reduction; (2) recycling; (3) energy recovery; and (4) land filling. This handbook emphasizes recycling as a method of handling the problem of dealing with solid wastes. Included are a list of the categories and uses of…

  19. FLY ASH RECYCLE IN DRY SCRUBBING

    EPA Science Inventory

    The paper describes the effects of fly ash recycle in dry scrubbing. (Previous workers have shown that the recycle of product solids improves the utilization of slaked lime--Ca(OH)2--for sulfur dioxide (SO2) removal by spray dryers with bag filters.) In laboratory-scale experimen...

  20. RECYCLING OF WATER IN POULTRY PROCESSING PLANTS

    EPA Science Inventory

    Studies were conducted on recycling chiller water in a poultry processing plant. The recycling system must be provided with the capability of removing solids and controlling the microbial population. UV was used to control the microbial population. For this control to be effectiv...

  1. 75 FR 71003 - America Recycles Day, 2010

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ... thirty-fifth. (Presidential Sig.) [FR Doc. 2010-29455 Filed 11-18-10; 11:15 am] Billing code 3195-W1-P ... Documents#0;#0; ] Proclamation 8601 of November 15, 2010 America Recycles Day, 2010 By the President of the... Recycles Day, we celebrate the individuals, communities, local governments, and businesses that...

  2. 77 FR 69729 - America Recycles Day, 2012

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-20

    ... States of America the two hundred and thirty-seventh. (Presidential Sig.) [FR Doc. 2012-28387 Filed 11-19... November 20, 2012 Part IV The President Proclamation 8905--America Recycles Day, 2012 #0; #0; #0... Recycles Day, 2012 By the President of the United States of America A Proclamation For 15 years,...

  3. 76 FR 71861 - America Recycles Day, 2011

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... United States of America the two hundred and thirty-sixth. (Presidential Sig.) [FR Doc. 2011-30068 Filed... November 18, 2011 Part VII The President Proclamation 8754--America Recycles Day, 2011 #0; #0; #0... Recycles Day, 2011 By the President of the United States of America A Proclamation As Americans, we have...

  4. Utility of Recycled Bedding for Laboratory Rodents

    PubMed Central

    Miyamoto, Toru; Li, Zhixia; Kibushi, Tomomi; Okano, Shinya; Yamasaki, Nakamichi; Kasai, Noriyuki

    2009-01-01

    Animal facilities generate a large amount of used bedding containing excrement as medical waste. We developed a recycling system for used bedding that involves soft hydrothermal processing. In this study, we examined the effects of bedding type on growth, hematologic and serum biochemical values, and organ weights of female and male mice reared on either recycled or fresh bedding from 3 to 33 wk of age. Neither growth nor physiology differed between mice housed on recycled bedding compared with fresh bedding. When 14-wk-old mice were bred, litter size and total number of weaned pups showed no significant differences between animals raised on recycled or fresh bedding. Because bedding type influences the environment within cages and animal rooms, we evaluated particulate and ammonia data from cages and animal rooms. Values were significantly lower from cages and rooms that used recycled bedding than from those using fresh bedding, thus indicating that recycled bedding has the potential to improve the environment within both cages and animal rooms. Overall, this study revealed that recycled bedding is an excellent material for use in housing laboratory rodents. Specifically, recycled bedding may reduce medical waste and maintain healthy environments within cages and animal rooms. PMID:19653951

  5. ON-SITE WASTE INK RECYCLING

    EPA Science Inventory

    Recycling ink has good potential as a way to reduce waste and promote long-term cost avings. he evaluation summarized here addresses the product quality, waste reduction nd economic issues involved in recycling printing ink in a facility such as THE ARFORD COURANT newspaper in Ha...

  6. MOBILE ON-SITE RECYCLING OF METALWORKING FLUIDS

    EPA Science Inventory

    This evaluation addresses the product quality, waste reduction, and economic issues involved in recycling metalworking fluids through a mobile recycling unit. The specific recycling unit evaluated is based on the technology of filtration, pasteurization, and centrifugation. Metal...

  7. Looking North at Uranium recovery Recycle Tanks in Red Room ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking North at Uranium recovery Recycle Tanks in Red Room in Recycle Recovery Building - Hematite Fuel Fabrication Facility, Recycle Recovery Building, 3300 State Road P, Festus, Jefferson County, MO

  8. Building a Recycling Program: A Case Study in Success.

    ERIC Educational Resources Information Center

    Sabol, Laurie

    1992-01-01

    Presents the development and ongoing operation of a library recycling program established at Bowling Green State University in Ohio. Discusses the initiation and projects of the library recycling committee, logistics, and future projections for library recycling operations. (two references) (MCO)

  9. Hyperammonaemic encephalopathy secondary to selective cobalamin deficiency in a juvenile Border collie.

    PubMed

    Battersby, I A; Giger, U; Hall, E J

    2005-07-01

    An eight-month-old Border collie was presented with anorexia, cachexia, failure to thrive and stupor. Laboratory tests demonstrated a mild anaemia, neutropenia, proteinuria and hyperammonaemia. Serum bile acid concentrations were normal, but an ammonia tolerance test (ATT) was abnormal. The dog responded to symptomatic therapy for hepatoencephalopathy. When a low serum cobalamin (vitamin B12) concentration and methylmalonic aciduria were noted, the dog was given a supplement of parenteral cobalamin. Two weeks later, a repeat ATT was normal. Cobalamin supplementation was continued every two weeks, and all clinical signs, except for proteinuria, resolved despite withdrawing all therapy for hepatoencephalopathy. A presumptive diagnosis of hereditary selective cobalamin malabsorption was made, based on the young age, Border collie breed, low serum cobalamin concentration and methylmalonic aciduria. Although hereditary selective cobalamin malabsorption in Border collies, giant schnauzers, Australian shepherd dogs and beagles has previously been reported in North America, to the authors' knowledge this is the first report of the condition in the UK and the first to document an abnormal ATT in a cobalamin-deficient dog. PMID:16035451

  10. 8. UPPER INSIDE CHORD, VERTICAL, LATERAL STRUT, UPPER LATERAL & ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. UPPER INSIDE CHORD, VERTICAL, LATERAL STRUT, UPPER LATERAL & GUSSET PLATE, ONE DIAGONAL BRACE - Enterprise Parker Truss Bridge, Spanning Smoky Hill River on K-43 Highway, Enterprise, Dickinson County, KS

  11. 7. UPPER INSIDE CHORD, VERTICAL, LATERAL STRUT, UPPER LATERAL & ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. UPPER INSIDE CHORD, VERTICAL, LATERAL STRUT, UPPER LATERAL & GUSSET PLATE, TWO DIAGONAL BRACES - Enterprise Parker Truss Bridge, Spanning Smoky Hill River on K-43 Highway, Enterprise, Dickinson County, KS

  12. Solid waste recycling programs at Rocky Flats

    SciTech Connect

    Millette, R.L.; Blackman, T.E.; Shepard, M.D.

    1994-12-31

    The Rocky Flats (RFP) recycling programs for solid waste materials have been in place for over ten years. Within the last three years, the programs were centralized under the direction of the Rocky Flats Waste Minimization department, with the assistance of various plant organizations (e.g., Trucking, Building Services, Regulated Waste Operations, property Utilization and Disposal and Security). Waste Minimization designs collection and transportation systems for recyclable materials and evaluates recycling markets for opportunities to add new commodities to the existing programs. The Waste Minimization department also promotes employee participation in the Rocky Flats Recycling Programs, and collects all recycling data for publication. A description of the program status as of January 1994 is given.

  13. Establishing a comprehensive recycling process at KCD

    SciTech Connect

    Beauchamp, B.

    1993-04-01

    An effort is being undertaken at the Kansas City Division to enhance its over-all recycling program by establishing a comprehensive recycling process. The objective of this recycling process is to optimize the use of our resources of people, equipment, time, and money as we search for ways to minimize the amount of waste generated and disposed of at our facility. The comprehensive recycling process which is being developed consists of a checklist which will help the user identify all the steps needed to take a recycling opportunity from initial concept to completed program in a manner which is effective and efficient. The purpose of this presentation is to address the efforts which have been, and are now being, made to achieve this objective.

  14. Dust recycling technology in Kimitsu Works

    NASA Astrophysics Data System (ADS)

    Oda, Hiroshi; Ibaraki, Tetsuharu

    Dust recycling technology by the rotary hearth furnace has been applied at Nippon Steel‧s Kimitsu Works since 2000. The dust and sludge with iron oxide and carbon are agglomerated into shaped articles and the iron oxide is reduced in a high temperature atmosphere. Zinc and other impurities in the dust and sludge are expelled and exhausted into off gas. The DRI pellets made from the dust and sludge have 70% metallization and are strong enough for being recycled to the blast furnaces. No.1 plant, which was constructed in May 2000 and has an agglomeration method of pelletizing, recycles mainly dry dusts. No.2 plant, which was constructed in December 2002 and has an agglomeration method of extrusion, recycles mainly sludge. The combination of the two plants is a solution for recycling various kinds of dusts and sludge emitted in a large scale steel works as Kimitsu Works

  15. Preconceptual Design Description for Caustic Recycle Facility

    SciTech Connect

    Sevigny, Gary J.; Poloski, Adam P.; Fountain, Matthew S.; Kurath, Dean E.

    2008-04-12

    The U.S. Department of Energy plans to vitrify both high-level and low-activity waste at the Hanford Site in southeastern Washington State. One aspect of the planning includes a need for a caustic recycle process to separate sodium hydroxide for recycle. Sodium is already a major limitation to the waste-oxide loading in the low-activity waste glass to be vitrified at the Waste Treatment Plant, and additional sodium hydroxide will be added to remove aluminum and to control precipitation in the process equipment. Aluminum is being removed from the high level sludge to reduce the number of high level waste canisters produced. A sodium recycle process would reduce the volume of low-activity waste glass produced and minimize the need to purchase new sodium hydroxide, so there is a renewed interest in investigating sodium recycle. This document describes an electrochemical facility for recycling sodium for the WTP.

  16. Analysis of chain saw lubricating oils commonly used in Thailand's southern border provinces for forensic science purpose.

    PubMed

    Choodum, Aree; Tripuwanard, Kijja; Daeid, Niamh Nic

    2014-08-01

    In recent years, Thailand's southern border provinces (Malay-Muslim-majority border provinces) have become the scene of violence and insurgency. One of the attack patterns is the blocking of roads with perennial plants followed by planned attacks using improvised explosive devices (IEDs) or weapons on first responders. Containers of viscous dark lubricating oil and traces of lubricants on the felled trees were usually found at the scene. These were suspected to be chain oil lubricant from the chainsaws used to cut down the trees used for the roadblock. This work aimed to differentiate the chromatographic patterns of used lubricating oils available in automobile repair shops from various locations across Thailand's southern border provinces. Lubricating oils were analyzed using gas chromatography/flame ionization detector (GC/FID) every two weeks to study their variation in chemical compositions over time. The results obtained from GC/FID were normalized for differentiation. This included four two-stroke, six four-stroke, and three recycled oils. Two lubricating oils found at an incident scene were also analyzed and the results compared with the chain oil from five seized chainsaws. PMID:24875837

  17. Usability in Public Services and Border Control

    NASA Astrophysics Data System (ADS)

    Pirelli, Giuliano

    The paper starts with a brief overview of the scale of disability and associated challenges and puts them in the context of the public policy on disability. It then analyses the usability challenges in public services and border control, including the issues of accessibility, safety and communication. These need to be addressed in future policy proposals, to provide the best assistance by new technologies to elderly people and people with disabilities, avoiding creating new barriers due to incorrect or incomplete initial conception. With increasing flux of novel security technology in mass transportation systems, and particularly the use of biometric identification in airports, the challenge of usability is recognized. This paper analyses these issues in the context of users with disability in an idealized process of Simplifying Passenger Travel (SPT).

  18. Is Municipal Solid Waste Recycling Economically Efficient?

    NASA Astrophysics Data System (ADS)

    Lavee, Doron

    2007-12-01

    It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000 2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.

  19. Lateral conduction infrared photodetector

    DOEpatents

    Kim, Jin K.; Carroll, Malcolm S.

    2011-09-20

    A photodetector for detecting infrared light in a wavelength range of 3-25 .mu.m is disclosed. The photodetector has a mesa structure formed from semiconductor layers which include a type-II superlattice formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5. Impurity doped regions are formed on sidewalls of the mesa structure to provide for a lateral conduction of photo-generated carriers which can provide an increased carrier mobility and a reduced surface recombination. An optional bias electrode can be used in the photodetector to control and vary a cut-off wavelength or a depletion width therein. The photodetector can be formed as a single-color or multi-color device, and can also be used to form a focal plane array which is compatible with conventional read-out integrated circuits.

  20. Laterality and language experience.

    PubMed

    Hull, Rachel; Vaid, Jyotsna

    2006-09-01

    A meta-analysis was conducted on studies that examined hemispheric functional asymmetry for language in brain-intact monolingual and bilingual adults. Data from 23 laterality studies that directly compared bilingual and monolingual speakers on the same language were analysed (n = 1234). Variables examined were language experience (monolingual, bilingual), experimental paradigm (dichotic listening, visual hemifield presentation, and dual task) and, among bilinguals, the influence of second language proficiency (proficient vs nonproficient) and onset of bilingualism (early, or before age 6; and late, or after age 6). Overall, monolinguals and late bilinguals showed reliable left hemisphere dominance, while early bilinguals showed reliable bilateral hemispheric involvement. Within bilinguals, there was no reliable effect of language proficiency when age of L2 acquisition was controlled. The findings indicate that early learning of one vs. two languages predicts divergent patterns of cerebral language lateralisation in adulthood. PMID:16882556

  1. Lateral Flow Immunoassay.

    PubMed

    Ching, Kathryn H

    2015-01-01

    Lateral flow immunoassays (LFIAs) are a staple in the field of rapid diagnostics. These small handheld devices require no specialized training or equipment to operate, and generate a result within minutes of sample application. They are an ideal format for many types of home test kits, for emergency responders and for food manufacturers and producers looking for a quick evaluation of a given sample. LFIAs rely on high quality monoclonal antibodies that recognize the analyte of interest. As monoclonal antibody technology becomes more accessible to smaller laboratories, there has been increased interest in developing LFIA prototypes for potential commercial manufacture. In this chapter, the basics of designing and building an LFIA prototype are described. PMID:26160571

  2. Cross-border firing and injury patterns

    PubMed Central

    Gupta, Nital; Hackla, Shafiq; Bhagat, Virendar; Singh, Satvir; Hussain, Farid; Gupta, Anil

    2016-01-01

    Introduction: Cross-border firing are increasingly being common in the modern era. The injuries resulting from these low intensity conflicts are a source of anxiety among treating physicians and their respective governments. The provisions are required to minimise the suffering of the victims viz. Mode of injuries, mortality patterns, adequacy of treatment at pre-hospital and tertiary care hospital and provisions to decrease morbidity and mortality for the people living in these areas. Materials and Methods: A retrospective study was conducted in GMCH, Jammu who suffered injuries due to cross border firing in the month of October, 2014. 68 patients were reported in the causality wing. All the patients were referred from level 2 trauma centre. There were 51 males and 17 females out of which 5 were children. The cause of injury, involvement of organ system, cause of mortality and morbidity and loopholes in prehospital management were identified. Results: Sharpnel were the most common cause of injury followed by indirect trauma. The common cause of mortality was abdominal and thoracic injuries. There were 4 deaths at hospital 2 of which were brought dead and 2 died during the course of treatment. There were twenty patients with extremity injuries, fourteen with chest trauma, eleven with abdomen including parineal injuries, three with head injuries, eight with ENT injuries, three with eye injuries and nine with splinters in the back out of which two were in the spinal canal. Conclusion: Prehospital stabilisation, early transport, in-transit resuscitation, immediate surgery if required and implementation of triage model and ATLS protocol has been the key to reduce mortality and morbidity. PMID:26957821

  3. Recycling production designs: the value of coordination and flexibility in aluminum recycling operations

    NASA Astrophysics Data System (ADS)

    Brommer, Tracey H.

    The growing motivation for aluminum recycling has prompted interest in recycling alternative and more challenging secondary materials. The nature of these alternative secondary materials necessitates the development of an intermediate recycling facility that can reprocess the secondary materials into a liquid product Two downstream aluminum remelters will incorporate the liquid products into their aluminum alloy production schedules. Energy and environmental benefits result from delivering the products as liquid but coordination challenges persist because of the energy cost to maintain the liquid. Further coordination challenges result from the necessity to establish a long term recycling production plan in the presence of long term downstream aluminum remelter production uncertainty and inherent variation in the daily order schedule of the downstream aluminum remelters. In this context a fundamental question arises, considering the metallurgical complexities of dross reprocessing, what is the value of operating a coordinated set of by-product reprocessing plants and remelting cast houses? A methodology is presented to calculate the optimal recycling center production parameters including 1) the number of recycled products, 2) the volume of recycled products, 3) allocation of recycled materials across recycled products, 4) allocation of recycled products across finished alloys, 4) the level of flexibility for the recycling center to operate. The methods implemented include, 1) an optimization model to describe the long term operations of the recycling center, 2) an uncertainty simulation tool, 3) a simulation optimization method, 4) a dynamic simulation tool with four embedded daily production optimization models of varying degrees of flexibility. This methodology is used to quantify the performance of several recycling center production designs of varying levels of coordination and flexibility. This analysis allowed the identification of the optimal recycling

  4. Issues in recycling galvanized scrap

    SciTech Connect

    Koros, P.J.; Hellickson, D.A.; Dudek, F.J.

    1995-02-10

    The quality of the steel used for most galvanizing (and tinplate) applications makes scrap derived from their production and use a premier solid charge material for steelmaking. In 1989 the AISI created a Task Force to define the issues and to recommend technologically and economically sound approaches to assure continued, unhindered recyclability of the growing volume of galvanized scrap. The AISI program addressed the treatment of full-sized industrial bales of scrap. The current, on-going MRI (US)--Argonne National Laboratory program is focused on ``loose`` scrap from industrial and post-consumer sources. Results from these programs, issues of scrap management from source to steel melting, the choices for handling zinc in iron and steelmaking and the benefits/costs for removal of zinc (and lead) from scrap prior to melting in BOF and foundry operations are reviewed in this paper.

  5. Polymer thermolysis for plastics recycling

    SciTech Connect

    Madras, G.; Smith, J.M.; McCoy, B.J.

    1996-12-31

    One approach to plastics recycling is the thermolytic degradation of polymer in solution to simpler molecules. We have investigated fundamental aspects of polymer thermolysis in a steady-state flow reactor operated at low temperatures (relative to pyrolysis) and at pressures high enough to maintain a liquid solution. The molecular-weight distributions (MWDs) of the feed and effluent at each condition were examined by gel permeation chromatography (GPC) as a function of residence time. In general the polymers are degraded by either random chain scission, and/or by depolymerization to specific low molecular-weight compounds (e.g., monomers, dimers,...). The experimental data for MWDs were interpreted with rate expressions based on continuous kinetics, and rate coefficients and activation energies were determined for the specific and random degradation processes. Experimental results are described for poly(styrene-allyl alcohol), poly(x-methyl styrene), and poly(methyl methacrylate). 10 refs.

  6. Recycled rubber in cement composites

    SciTech Connect

    Raghavan, D.; Tratt, K.; Wool, R.P.

    1994-12-31

    Disposal of 200 million waste tires in the US each year has become a major problem. An environmentally sound innovative technology of recycling rubber in cement matrix was examined. Using silane coupling agent the rubber was bonded to the hydrating cement making a lighter composite, which absorbed more energy than ordinary Portland cement. The bonding information was obtained by peel strength analysis. SEM was used to understand the mode of fracture in pure cement paste, cement bonded rubber composite and rubber filled cement paste. It was found that cracks propagate through the rubber particle in rubber bonded cement composite while in unbonded rubber cement mix, the cracks propagate around the interface. The density and shrinkage measurements are also discussed.

  7. Generalized Teleportation and Entanglement Recycling

    NASA Astrophysics Data System (ADS)

    Strelchuk, Sergii; Horodecki, Michał; Oppenheim, Jonathan

    2013-01-01

    We introduce new teleportation protocols which are generalizations of the original teleportation protocols that use the Pauli group and the port-based teleportation protocols, introduced by Hiroshima and Ishizaka, that use the symmetric permutation group. We derive sufficient conditions for a set of operations, which in general need not form a group, to give rise to a teleportation protocol and provide examples of such schemes. This generalization leads to protocols with novel properties and is needed to push forward new schemes of computation based on them. Port-based teleportation protocols and our generalizations use a large resource state consisting of N singlets to teleport only a single qubit state reliably. We provide two distinct protocols which recycle the resource state to teleport multiple states with error linearly increasing with their number. The first protocol consists of sequentially teleporting qubit states, and the second teleports them in a bulk.

  8. Processing solid propellants for recycling

    SciTech Connect

    Whinnery, L.L.; Griffiths, S.K.; Handrock, J.L.; Lipkin, J.

    1994-05-01

    Rapid evolution in the structure of military forces worldwide is resulting in the retirement of numerous weapon systems. Many of these systems include rocket motors containing highly energetic propellants based on hazardous nitrocellulose/nitroglycerin (NC/NG) mixtures. Even as the surplus quantities of such material increases, however, current disposal methods -- principally open burning and open detonation (OB/OD) -- are coming under close scrutiny from environmental regulators. Environmentally conscious alternatives to disposal of propellant and explosives are thus receiving renewed interest. Recycle and reuse alternatives to OB/OD appear particularly attractive because some of the energetic materials in the inventories of surplus weapon systems represent potentially valuable resources to the commercial explosives and chemical industries. The ability to reclaim such resources is therefore likely to be a key requirement of any successful technology of the future in rocket motor demilitarization. This document consists of view graphs from the poster session.

  9. Generalized teleportation and entanglement recycling.

    PubMed

    Strelchuk, Sergii; Horodecki, Michał; Oppenheim, Jonathan

    2013-01-01

    We introduce new teleportation protocols which are generalizations of the original teleportation protocols that use the Pauli group and the port-based teleportation protocols, introduced by Hiroshima and Ishizaka, that use the symmetric permutation group. We derive sufficient conditions for a set of operations, which in general need not form a group, to give rise to a teleportation protocol and provide examples of such schemes. This generalization leads to protocols with novel properties and is needed to push forward new schemes of computation based on them. Port-based teleportation protocols and our generalizations use a large resource state consisting of N singlets to teleport only a single qubit state reliably. We provide two distinct protocols which recycle the resource state to teleport multiple states with error linearly increasing with their number. The first protocol consists of sequentially teleporting qubit states, and the second teleports them in a bulk. PMID:23383769

  10. Heterogeneous Recycling in Fast Reactors

    SciTech Connect

    Forget, Benoit; Pope, Michael; Piet, Steven J.; Driscoll, Michael

    2012-07-30

    Current sodium fast reactor (SFR) designs have avoided the use of depleted uranium blankets over concerns of creating weapons grade plutonium. While reducing proliferation risks, this restrains the reactor design space considerably. This project will analyze various blanket and transmutation target configurations that could broaden the design space while still addressing the non-proliferation issues. The blanket designs will be assessed based on the transmutation efficiency of key minor actinide (MA) isotopes and also on mitigation of associated proliferation risks. This study will also evaluate SFR core performance under different scenarios in which depleted uranium blankets are modified to include minor actinides with or without moderators (e.g. BeO, MgO, B4C, and hydrides). This will be done in an effort to increase the sustainability of the reactor and increase its power density while still offering a proliferation resistant design with the capability of burning MA waste produced from light water reactors (LWRs). Researchers will also analyze the use of recycled (as opposed to depleted) uranium in the blankets. The various designs will compare MA transmutation efficiency, plutonium breeding characteristics, proliferation risk, shutdown margins and reactivity coefficients with a current reference sodium fast reactor design employing homogeneous recycling. The team will also evaluate the out-of-core accumulation and/or burn-down rates of MAs and plutonium isotopes on a cycle-by-cycle basis. This cycle-by-cycle information will be produced in a format readily usable by the fuel cycle systems analysis code, VISION, for assessment of the sustainability of the deployment scenarios.

  11. Border Pedagogy: A Study of Preservice Teacher Transformation

    ERIC Educational Resources Information Center

    Romo, Jaime J.; Chavez, Claudia

    2006-01-01

    In our increasingly interconnected global society, learning to think about ourselves in a border context, making crossings and connections, reflecting on our position and power, and articulating a vision of social justice are necessary civic skills. Developing educational border crossers who have moved beyond stereotyping and the tourist's gaze to…

  12. 15 CFR 30.17 - Customs and Border Protection regulations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Requirements § 30.17 Customs and Border Protection regulations. Refer to the DHS's CBP regulations, 19 CFR 192... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Customs and Border Protection regulations. 30.17 Section 30.17 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

  13. 75 FR 70937 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ... SECURITY U.S. Customs and Border Protection Accreditation and Approval of Robinson International (USA) Inc., as a Commercial Gauger and Laboratory AGENCY: U.S. Customs and Border Protection, Department of... been approved to gauge and accredited to test petroleum and petroleum products for customs purposes,...

  14. 76 FR 65207 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-20

    ... SECURITY U.S. Customs and Border Protection Notice of Cancellation of Customs Broker Licenses AGENCY: U.S. Customs and Border Protection, U.S. Department of Homeland Security. ACTION: General notice. SUMMARY: Pursuant to section 641 of the Tariff Act of 1930, as amended, (19 U.S.C. 1641) and the U.S. Customs...

  15. 78 FR 35044 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-11

    ... information collection was previously published in the Federal Register (78 FR 19726) on April 2, 2013... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Visa Waiver Program Carrier Agreement (CBP Form I-775) AGENCY: U.S. Customs and Border Protection, Department of...

  16. 77 FR 38076 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-26

    ... SECURITY U.S. Customs and Border Protection Accreditation and Approval of SGS North America, Inc., as a Commercial Gauger and Laboratory AGENCY: U.S. Customs and Border Protection, Department of Homeland Security... petroleum and petroleum products, organic chemicals and vegetable oils for customs purposes, in...

  17. 77 FR 59206 - U.S. Customs and Border Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-26

    ... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Foreign Assembler's Declaration AGENCY: U.S. Customs and Border Protection (CBP), Department of Homeland Security. ACTION: 60-day... November 26, 2012, to be assured of consideration. ADDRESSES: Direct all written comments to U.S....

  18. 15 CFR 30.17 - Customs and Border Protection regulations.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Requirements § 30.17 Customs and Border Protection regulations. Refer to the DHS's CBP regulations, 19 CFR 192... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Customs and Border Protection regulations. 30.17 Section 30.17 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

  19. 15 CFR 30.17 - Customs and Border Protection regulations.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Requirements § 30.17 Customs and Border Protection regulations. Refer to the DHS's CBP regulations, 19 CFR 192... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Customs and Border Protection regulations. 30.17 Section 30.17 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

  20. 15 CFR 30.17 - Customs and Border Protection regulations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Requirements § 30.17 Customs and Border Protection regulations. Refer to the DHS's CBP regulations, 19 CFR 192... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Customs and Border Protection regulations. 30.17 Section 30.17 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

  1. Cross-Border Education: Conceptual Confusion and Data Deficits

    ERIC Educational Resources Information Center

    Knight, Jane

    2006-01-01

    It is no longer just students who are moving across borders to study. Program and institutions/providers are delivering foreign education programs and qualifications to students in their own countries. A whole new world of international academic mobility is opening up. This article looks at the concepts of cross-border, transnational, and…

  2. 8 CFR 212.6 - Border crossing identification cards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Application, to obtain a Form DSP-150 in accordance with the applicable DOS regulations at 22 CFR 41.32 and/or... border crossing card (or similar stamp in a passport). (i) A Canadian citizen or other person sharing... 22 CFR 41.122, a Form DSP-150 or combined B-1/B-2 visitor visa and non-biometric border...

  3. 8 CFR 212.6 - Border crossing identification cards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Application, to obtain a Form DSP-150 in accordance with the applicable DOS regulations at 22 CFR 41.32 and/or... border crossing card (or similar stamp in a passport). (i) A Canadian citizen or other person sharing... 22 CFR 41.122, a Form DSP-150 or combined B-1/B-2 visitor visa and non-biometric border...

  4. A Practical Spanish Grammar for Border Patrol Officers.

    ERIC Educational Resources Information Center

    Border Patrol Academy, El Paso, TX.

    Designed to be used in the Spanish training program for probationary officers at the Border Patrol Academy in El Paso, Texas, this revised 21-lesson traditional grammar text includes special features that make it pertinent to the job of a patrol inspector in the Mexican border area. An extensive appendix is comprised of exercise translations,…

  5. 15 CFR 30.17 - Customs and Border Protection regulations.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Requirements § 30.17 Customs and Border Protection regulations. Refer to the DHS's CBP regulations, 19 CFR 192... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Customs and Border Protection regulations. 30.17 Section 30.17 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign...

  6. View from the Border: Removing Barriers for Urban Gifted Students

    ERIC Educational Resources Information Center

    Cannon, Michael

    2011-01-01

    Borders--places where nations, people, and their cultures come together--are interesting spaces. The meeting may be friendly enough, but borders are by their nature places of "otherness," where those who are moving from one place to another are often conceived of as not belonging. High-ability students in this state of "otherness" have particular…

  7. 22 CFR 123.19 - Canadian and Mexican border shipments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Canadian and Mexican border shipments. 123.19 Section 123.19 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.19 Canadian and Mexican border shipments. A...

  8. 22 CFR 123.19 - Canadian and Mexican border shipments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Canadian and Mexican border shipments. 123.19 Section 123.19 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.19 Canadian and Mexican border shipments. A...

  9. 22 CFR 123.19 - Canadian and Mexican border shipments.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Canadian and Mexican border shipments. 123.19 Section 123.19 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.19 Canadian and Mexican border shipments. A...

  10. Life, Culture, and Education in a Border Region

    ERIC Educational Resources Information Center

    Yunshan, Liu

    2007-01-01

    The border region described in this article is the area in which the three provinces of Guizhou, Guangxi, and Yunnan converge and where Han Chinese, the Buyi minority, and the Miao minority are intermingled. This border region is not remote, because the Nan-Kun Railroad (a line connecting Nanning, Guangxi, with Kunming, Yunnan-Trans.) runs through…

  11. Impact of land consolidation and field borders on soil erosion and storage within agricultural landscapes

    NASA Astrophysics Data System (ADS)

    Chartin, Caroline; Salvador-Blanes, Sébastien; Olivier, Evrard; Van Oost, Kristof; Hinschberger, Florent; Macaire, Jean-Jacques

    2014-05-01

    Soil erosion plays an important role in sediment and carbon storage within, and exports from, catchments. In cultivated landscapes, field borders can improve the temporary storage of eroded soil particles and associated carbon, by impeding lateral soil fluxes. These local soil accumulations can lead to the development of linear landforms (such as headlands and lynchets) which will keep evolving after field border removal. A recent study performed in a representative cultivated hillslope of the SW Parisian Basin showed that 39% of the area corresponds to landforms resulting from soil accumulation induced by former and present field borders. This study demonstrated that field borders influence greatly the landscape morphology, but also the spatial distribution of soil thickness, and locally the A-horizon thickness, which are essential parameters for the prediction of SOC stocks. This study aims at characterizing and quantifying the effect of field borders and their removal on medium term topsoil erosion and deposition rates in a cultivated hillslope of the SW Parisian Basin, consolidated in 1967. Here, we used the Cs-137 technique to assess recent patterns of soil redistribution. We measured the Cs-137 inventories of 68 soil cores sampled along transects covering the area and, more specifically, linear landforms identified along present and past field borders (i.e., lynchet and undulation landforms, respectively). Then, we used a spatially-distributed Cs-137 conversion model that simulates and discriminates soil redistribution induced by water and tillage erosion processes over the last fifty years. Finally, observations and model outputs were confronted. Our results show that tillage erosion dominate the soil redistribution in the study area for the 1954-2009 period and generated about 95% (i.e., 4.50 Mg.ha-1.yr-1) of the total gross erosion. Soil redistribution was largely affected by the presence of current and former field borders, where hotspots areas of

  12. Superior border versus inferior border fixation in displaced mandibular angle fractures: prospective randomized comparative study.

    PubMed

    Singh, V; Khatana, S; Bhagol, A

    2014-07-01

    A prospective randomized comparative study was conducted to compare open reduction and internal fixation of displaced fractures (>2mm) via intraoral approach with application of a single monocortical miniplate according to Champy's ideal line of osteosynthesis (group A) versus an extraoral approach with application of an inferior border plate with at least two holes (bicortical screws) on either side of the fracture line (group B). Clinical and radiographic assessment was done preoperatively, immediately postoperative, and at 1, 4, and 12 weeks of follow-up. Parametric and non-parametric data were evaluated by independent samples t-test and χ(2) analysis, respectively; P<0.05 was considered statistically significant. There was no significant difference between the two groups with regard to complication rates, although functional outcomes including pain (visual analogue scale score) at the 1-week follow-up and inter-incisal mouth opening at the 12-week follow-up were found to be better in group B. On radiographic assessment, the inferior border was better aligned in group B than in group A, with no superior border distraction in group B. The duration of surgery was shorter in group B, and this was considered to be the easier approach for fixation of the device as assessed by the surgeons. PMID:24636170

  13. Cost effectiveness of recycling: a systems model.

    PubMed

    Tonjes, David J; Mallikarjun, Sreekanth

    2013-11-01

    Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets. PMID:23816311

  14. Optical Properties of Polypropylene upon Recycling

    PubMed Central

    2013-01-01

    In the last few years there has been an increasing interest in the possibility of recycling polymeric materials, using physical recycling. However, is it well known that polymers experience a depletion of all the properties upon recycling. These effects have been widely characterized in the literature for what concerns the mechanical or rheological properties. The changes of optical properties after recycling have been much less studied, even if, especially in food packaging, optical characteristics (above all the opacity) are of extreme importance, and thus it is quite significant to assess the effect of recycling on these properties. In this work, the influence of recycling steps on the opacity of films of a commercial grade of isotactic polypropylene (i-PP) was studied. The material was extruded several times to mimic the effect of recycling procedures. After extrusion, films were obtained by cooling samples of material at different cooling rates. The opacity of the obtained films was then measured and related to their crystallinity and morphology. It was found that opacity generally increases on increasing the amount of α phase and for the same amount of α phase on increasing the size of the spherulites. PMID:24288478

  15. Crustal recycling and the aleutian arc

    SciTech Connect

    Kay, R.W.; Kay, S.M. )

    1988-06-01

    Two types of crustal recycling transfer continental crust back into its mantle source. The first of these, upper crustal recycling, involves elements that have been fractionated by the hydrosphere-sediment system, and are subducted as a part of the oceanic crust. The subduction process (S-process) then fractionates these elements, and those not removed at shallow tectonic levels and as excess components of arc magmas are returned to the mantle. Newly determined trace element composition of Pacific oceanic sedimants are variable and mixing is necessary during the S-process, if sediment is to provide excess element in the ratios observed in Aleutian arc magmas. Only a small fraction of the total sediment subducted at the Aleutian trench is required to furnish the excess elements in Aleutian arc magmas. Ba and {sub 10}Be data indicate that this small fraction includes a contribution from the youngest subducted sediment. The second type of recycling, lower crustal recycling, involves crystal cumulates of both arc and oceanic crustal origin, and residues from crustal melting within arc crust. Unlike the silicic sediments, recycled lower crust is mafic to ultramafic in composition. Trace element analyses of xenoliths representing Aleutian arc lower crust are presented. Recycling by delamination of lower crust and attached mantle lithosphere may occur following basalt eclogite phase transformations that are facilitated by terrane suturing events that weld oceanic island arcs to the continents. The relative importance of upper and lower crustal recycling exerts a primary control on continental crustal composition.

  16. Recyclability Evaluation Method Considering Material Combination and Degradation

    NASA Astrophysics Data System (ADS)

    Oyasato, Naohiko; Kobayashi, Hideki

    A new method of recyclability evaluation is proposed. The recyclability of a product is given by summing up recyclability of all units to which the product is manually disassembled. The recyclability of a unit is calculated if all names and amounts of materials of which the unit is composed are known. The recyclability of a disassembled unit consisting of multiple materials is judged on the grounds of removability of impurities, miscibility and marketability of polymer blends. Recyclability of a long-lifetime product can be estimated from recyclability of units, which are modeled as probabilistically distributed degradation of materials. The proposed method is applied to recyclability evaluation for a refrigerator with several scenarios of disassembly levels. The practical disassembly scenarios limit the maximum recyclability rate of the product. Therefore, recyclability rates calculated based on the proposed method are considerably lower than those of the recyclable materials of which the product consisted.

  17. Structural and molecular mechanisms of gap junction remodeling in epicardial border zone myocytes following myocardial infarction.

    PubMed

    Kieken, Fabien; Mutsaers, Nancy; Dolmatova, Elena; Virgil, Kelly; Wit, Andrew L; Kellezi, Admir; Hirst-Jensen, Bethany J; Duffy, Heather S; Sorgen, Paul L

    2009-05-01

    Lateralization of the ventricular gap junction protein connexin 43 (Cx43) occurs in epicardial border zone myocytes following myocardial infarction (MI) and is arrhythmogenic. Alterations in Cx43 protein partners have been hypothesized to play a role in lateralization although mechanisms by which this occurs are unknown. To examine potential mechanisms we did nuclear magnetic resonance, yeast 2-hybrid, and surface plasmon resonance studies and found that the SH3 domain of the tyrosine kinase c-Src binds to the Cx43 scaffolding protein zonula occludens-1 (ZO-1) with a higher affinity than does Cx43. This suggests c-Src outcompetes Cx43 for binding to ZO-1, thus acting as a chaperone for ZO-1 and causing unhooking from Cx43. To determine whether c-Src/ZO-1 interactions affect Cx43 lateralization within the epicardial border zone, we performed Western blot, immunoprecipitation, and immunolocalization for active c-Src (p-cSrc) post-MI using a canine model of coronary occlusion. We found that post-MI p-cSrc interacts with ZO-1 as Cx43 begins to decrease its interaction with ZO-1 and undergo initial loss of intercalated disk localization. This indicates that the molecular mechanisms by which Cx43 is lost from the intercalated disk following MI includes an interaction of p-cSrc with ZO-1 and subsequent loss of scaffolding of Cx43 leaving Cx43 free to diffuse in myocyte membranes from areas of high Cx43, as at the intercalated disk, to regions of lower Cx43 content, the lateral myocyte membrane. Therefore shifts in Cx43 protein partners may underlie, in part, arrhythmogenesis in the post-MI heart. PMID:19342602

  18. Recycling of plastic waste: Presence of phthalates in plastics from households and industry.

    PubMed

    Pivnenko, K; Eriksen, M K; Martín-Fernández, J A; Eriksson, E; Astrup, T F

    2016-08-01

    Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large volumes and are commonly used as plasticisers in plastics manufacturing. Potential impacts on human health require restricted use in selected applications and a need for the closer monitoring of potential sources of human exposure. Although the presence of phthalates in a variety of plastics has been recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP had the highest frequency of detection in the samples analysed, with 360μg/g, 460μg/g and 2700μg/g as the maximum measured concentrations, respectively. Among other, statistical analysis of the analytical results suggested that phthalates were potentially added in the later stages of plastic product manufacturing (labelling, gluing, etc.) and were not removed following recycling of household waste plastics. Furthermore, DEHP was identified as a potential indicator for phthalate contamination of plastics. Close monitoring of plastics intended for phthalates-sensitive applications is recommended if recycled plastics are to be used as raw material in production. PMID:27211312

  19. TECHNIQUES TO ASSESS CROSS-BORDER AIR POLLUTION AND APPLICATION TO A U.S.-MEXICO BORDER REGION

    EPA Science Inventory

    A year-long assessment of cross-border air pollution was conducted in the eastmost section of the US-Mexico border region, known as the Lower Rio Grande Valley, in South Texas. Measurements were conducted on the US side and included fine particle mass (PM2.5) and elemental com...

  20. U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--PAHS IN AIR--REAL TIME SENSOR ANALYTICAL RESULTS

    EPA Science Inventory

    This PAHs in Air data set contains 516 readings detecting the presence of polynuclear aromatic hydrocarbons (PAHs) in 86 households in the Arizona Border Study using a photo ionization device (PID). Keywords: air; PAHs, real time.

    The U.S.-Mexico Border Program is sponsored by...

  1. NORTH AMERICAN FREE TRADE AGREEMENT (NAFTA) BORDER PROJECT - A COMPARISON OF THE ARIZONA BORDER POPULATION WITH THE STATE POPULATION

    EPA Science Inventory

    There is a perception among the population of the border communities that they have increased exposure due to their proximity to pollution sources in Mexico. This study provides exposure data for the border population that will be compared with data from a probabilistic exposure...

  2. Laterally oscillating nitinol engine

    SciTech Connect

    Banks, R.

    1987-09-08

    This patent describes a laterally oscillating nitinol engine comprising: a first L-shaped drive member journalled for pivoting horizontal oscillation about the juncture of the legs of the L-shaped member, a second drive member journalled for pivoting about a point proximate the outboard end of the shorter leg of the L-shaped member at a distance from the pivot journal of the L-shaped member, a bearing block secured to the end of longer leg of the L-shaped and having a guide hole. The second member extending through the guide hole and arranged to reciprocate therein, a shape memory alloy power element disposed in flexure secured at its ends to the bearing block and to the second member intermediate the sliding connection with the bearing block and the pivotal connection of the second member, means for disposing different temperature baths below the element whereby as the drive members oscillate about their journals the element alternately dips into one bath and then the other, and means for absorbing a portion of the energy developed by the engine and moving the power element from the cold bath to the hot bath.

  3. Economic feasibility of radioactive scrap steel recycling

    SciTech Connect

    Balhiser, R.; Rosholt, D.; Nichols, F.

    1995-12-31

    The goal of MSE`s Radioactive Scrap Steel (RSS) Recycle Program is to develop practical methods for recycling RSS into useful product. This paper provides interim information about ongoing feasibility investigations that are scheduled for completion by September 1995. The project approach, major issues, and cost projections are outlined. Current information indicates that a cost effective RSS Recycling Facility can be designed, built, and in operation by 1999. The RSS team believes that high quality steel plate can be made from RSS at a conversion cost of $1500 per ton or less.

  4. Distal border fragments of the equine navicular bone: association between magnetic resonance imaging characteristics and clinical lameness

    USGS Publications Warehouse

    Yorke, Elizabeth H.; Judy, Carter E.; Saveraid, Travis C.; McGowan, Conor P.; Caldwell, Fred J.

    2014-01-01

    Distal border fragments of the navicular bone are increasingly being detected due to the improved capabilities of magnetic resonance imaging (MRI), but their clinical significance remains unclear. The purpose of this retrospective study was to describe the location, size, and frequency of fragments in a cohort of horses presented for MRI of the foot and to compare MRI findings with severity of lameness. Archived MRI studies and medical records were searched from March 2006 to June 2008. Horses were included if a distal border fragment of the navicular bone was visible in MRI scans. Confidence interval comparisons and linear regression analyses were used to test hypotheses that fragments were associated with lameness and lameness severity was positively correlated with fragment volume and biaxial location. A total of 453 horses (874 limbs) were included. Fragments were identified in 60 horses (13.25%) and 90 limbs (10.3%). Fifty percent of the horses had unilateral fragments and 50% had bilateral fragments. Fragments were located at the lateral (62.2%), medial (8.89%), or medial and lateral (28.9%) angles of the distal border of the navicular bone. There was no increased probability of being categorized as lame if a fragment was present. There was no significant difference in fragment volume across lameness severity categorizations. Confidence intervals indicated a slightly increased probability of being classified as lame if both medial and lateral fragments were present. Findings indicated that distal border fragments of the navicular bone in equine MRI studies are unlikely to be related to existing lameness.

  5. Zircon Recycling in Arc Intrusions

    NASA Astrophysics Data System (ADS)

    Miller, J.; Barth, A.; Matzel, J.; Wooden, J.; Burgess, S.

    2008-12-01

    Recycling of zircon has been well established in arc intrusions and arc volcanoes, but a better understanding of where and how zircons are recycled can help illuminate how arc magma systems are constructed. To that end, we are conducting age, trace element (including Ti-in-zircon temperatures; TzrnTi) and isotopic studies of zircons from the Late Cretaceous (95-85 Ma) Tuolumne Intrusive Suite (TIS) in the Sierra Nevada Batholith (CA). Within the TIS zircons inherited from ancient basement sources and/or distinctly older host rocks are uncommon, but recycled zircon antecrysts from earlier periods of TIS-related magmatism are common and conspicuous in the inner and two most voluminous units of the TIS, the Half Dome and Cathedral Peak Granodiorites. All TIS units have low bulk Zr ([Zr]<150 ppm) and thus low calculated zircon saturation temperatures (Tzrnsat). Within the Half Dome and Cathedral Peak, TzrnTi values are predominantly at or below average Tzrnsat, and there is no apparent correlation between age and TzrnTi. At temperatures appropriate for granodiorite/tonalite melt generation (at or above biotite dehydration; >825°C), [Zr] in the TIS is a factor of 2 to 3 lower than saturation values. Low [Zr] in TIS rocks might be attributed to a very limited supply of zircon in the source, by disequilibrium melting and rapid melt extraction [1], by melting reactions involving formation of other phases that can incorporate appreciable Zr [2], or by removal of zircon at an earlier stage of magma evolution. Based on a preliminary compilation of literature data, low [Zr] is common to Late Cretaceous N.A. Cordilleran granodioritic/tonalitic intrusions (typically <200 ppm and frequently 100-150 ppm for individual large intrusions or intrusive suites). We infer from this that [Zr] in anatectic melts is probably not limited by zircon supply and is primarily controlled by melting parameters. Comparison of the data from TIS with one of these intrusions, the smaller but otherwise

  6. Cooperative Monitoring Center Occasional Paper/7: A Generic Model for Cooperative Border Security

    SciTech Connect

    Netzer, Colonel Gideon

    1999-03-01

    This paper presents a generic model for dealing with security problems along borders between countries. It presents descriptions and characteristics of various borders and identifies the threats to border security, while emphasizing cooperative monitoring solutions.

  7. 78 FR 13076 - Notice of Submission of Proposed Information Collection to OMB; Border Community Capital Initiative

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-26

    ... URBAN DEVELOPMENT Notice of Submission of Proposed Information Collection to OMB; Border Community... Border Community Capital Initiative grant process. Information is required to rate and rank competitive...: Border Community Capital Initiative. OMB Approval Number: 2506-New. Form Numbers: SF 424;...

  8. Environmental exposure of road borders to zinc.

    PubMed

    Blok, J

    2005-09-15

    The emissions of zinc along roads originating from tyre wear, corrosion of safety fence and other traffic-related sources have been quantified and validated by measured long-term loads in road run-off and airborne solids (drift) for 29 published case studies. The distribution pattern over the road border at various distances from the edge of the paved surface is assessed on the basis of 38 published case studies with measured concentrations in soil. For the impact assessment, the road border is differentiated into a zone that is part of the "technosphere" and the "target zone" beyond that technosphere that can be considered as part of the receiving environment. The "technosphere" of the road includes the central reservation, the hard and the soft shoulder or, if one or both shoulders are not present, the so-called obstacle "free zone" that is defined by road engineers. Pollution within the technosphere may require appropriate management of solid disposal and isolation from groundwater to prevent further distribution of pollutants to the environment. In the target zone along regional roads, the zinc load is about 4 mg/m(2) year and this is of the same order of magnitude as that of atmospheric deposition in areas beyond the influence of roads (background). In the target zone along highways, the zinc load is increased in comparison to the background deposition. The average load of about 38 mg/m(2) year is similar to that in fertilised agricultural land. Because most of the emitted zinc stays in the technosphere, the total amount entering this target zone along highways is limited. From the 140 tons of zinc per year that is released from tyre wear in The Netherlands, 64 tons is emitted in the urban area, 6.5 tons reaches to the target zones of all roads and only 1.1 tons of zinc will enter the target zone along highways. This amount will be further decreased by the application of porous asphalt in the near future. The emission from safety fence corrosion does not enter

  9. BORDER EFFECTS ON DSM-5 ALCOHOL USE DISORDERS ON BOTH SIDES OF THE U.S.-MEXICO BORDER

    PubMed Central

    Cherpitel, Cheryl J.; Ye, Yu; Bond, Jason; Zemore, Sarah E.; Borges, Guilherme; Greenfield, Thomas K.

    2015-01-01

    Background Little epidemiological evidence exists on alcohol use and related problems along the U.S.-Mexico border, although the borderlands have been the focus of recent media attention related to the escalating drug/violence “epidemic”. In the present study the relationship of proximity of living at the border and alcohol use disorders (AUDs) is analyzed from the U.S.-Mexico Study on Alcohol and Related Conditions (UMSARC). Methods Household surveys were conducted on 2,336 Mexican Americans in Texas (771 in a non-border city and 1,565 from three border cities located in the three poorest counties in the U.S.) and 2,460 Mexicans from the states of Nuevo Leon and Tamaulipas in Mexico (811 in a non-border city and 1,649 from three cities which are sister cities to the Texas border sites). Results Among current drinkers, prevalence of AUD was marginally greater (p<0.10) at the U.S. border compared to the non-border, but the opposite was true in Mexico (p<0.001), and these trends continued on both sides across volume and 5+ drinking days. Prevalence was greater in Laredo/Nuevo Laredo relative to their respective sister city counterparts on the same side. Border effects appeared greater for males than females in the U.S. and the opposite in Mexico. Conclusion The data suggest that border proximity may affect AUD in both the U.S. and Mexico, but in the opposite direction, and may be related to the relative perceived or actual stress of living in the respective communities. PMID:25649987

  10. Diamond heteroepitaxial lateral overgrowth

    NASA Astrophysics Data System (ADS)

    Tang, Yung-Hsiu

    This dissertation describes improvements in the growth of single crystal diamond by microwave plasma-assisted chemical vapor deposition (CVD). Heteroepitaxial (001) diamond was grown on 1 cm. 2 a-plane sapphiresubstrates using an epitaxial (001) Ir thin-film as a buffer layer. Low-energy ion bombardment of the Ir layer, a process known as bias-enhanced nucleation, is a key step in achieving a high density of diamond nuclei. Bias conditions were optimized to form uniformly-high nucleation densities across the substrates, which led to well-coalesced diamond thin films after short growth times. Epitaxial lateral overgrowth (ELO) was used as a means of decreasing diamond internal stress by impeding the propagation of threading dislocations into the growing material. Its use in diamond growth requires adaptation to the aggressive chemical and thermal environment of the hydrogen plasma in a CVD reactor. Three ELO variants were developed. The most successful utilized a gold (Au) mask prepared by vacuum evaporation onto the surface of a thin heteroepitaxial diamond layer. The Au mask pattern, a series of parallel stripes on the micrometer scale, was produced by standard lift-off photolithography. When diamond overgrows the mask, dislocations are largely confined to the substrate. Differing degrees of confinement were studied by varying the stripe geometry and orientation. Significant improvement in diamond quality was found in the overgrown regions, as evidenced by reduction of the Raman scattering linewidth. The Au layer was found to remain intact during diamond overgrowth and did not chemically bond with the diamond surface. Besides impeding the propagation of threading dislocations, it was discovered that the thermally-induced stress in the CVD diamond was significantly reduced as a result of the ductile Au layer. Cracking and delamination of the diamond from the substrate was mostly eliminated. When diamond was grown to thicknesses above 0.1 mm it was found that

  11. Thinking laterally about genomes.

    PubMed

    Ragan, Mark A

    2009-10-01

    Perhaps the most-surprising discovery of the genome era has been the extent to which prokaryotic and many eukaryotic genomes incorporate genetic material from sources other than their parent(s). Lateral genetic transfer (LGT) among bacteria was first observed about 100 years ago, and is now accepted to underlie important phenomena including the spread of antibiotic resistance and ability to degrade xenobiotics. LGT is invoked, perhaps too readily, to explain a breadth of awkward data including compositional heterogeneity of genomes, disagreement among gene-sequence trees, and mismatch between physiology and systematics. At the same time many details of LGT remain unknown or controversial, and some key questions have scarcely been asked. Here I critically review what we think we know about the existence, extent, mechanism and impact of LGT; identify important open questions; and point to research directions that hold particular promise for elucidating the role of LGT in genome evolution. Evidence for LGT in nature is not only inferential but also direct, and potential vectors are ubiquitous. Genetic material can pass between diverse habitats and be significantly altered during residency in viruses, complicating the inference of donors, In prokaryotes about twice as many genes are interrupted by LGT as are transferred intact, and about 5Short protein domains can be privileged units of transfer. Unresolved phylogenetic issues include the correct null hypothesis, and genes as units of analysis. Themes are beginning to emerge regarding the effect of LGT on cellular networks, but I show why generalization is premature. LGT can associate with radical changes in physiology and ecological niche. Better quantitative models of genome evolution are needed, and theoretical frameworks remain to be developed for some observations including chromosome assembly by LGT. PMID:20180279

  12. Coal liquefaction with preasphaltene recycle

    SciTech Connect

    Weimer, R.F.; Miller, R.N.

    1986-09-02

    A process is described for solvent refining coal to yield an asphaltene-rich product stream by forming a slurry of finely divided coal and a process solvent therefor, which process comprises the steps of: (1) contacting the slurry with a hydrogen-rich gas; (2) heating the slurry in the presence of the hydrogen-rich gas. (3) permitting the heated slurry to react and to dissolve at least some of the coal. (4) adding fresh hydrogen as required to form a liquefied coal slurry; (5) passing the liquefied coal slurry to a separator in which a vapor product stream and a condensed product stream are separated; (6) passing the condensed product stream to a vacuum distillation still; (7) removing from the vacuum distillation still a residual bottoms product, wherein the residual bottoms product from the still is mixed with a suitable extractions solvent and is passed to supercritical extraction system to separate an asphaltene-rich stream comprised of pentane solubles and benzene solubles from a preasphaltene-rich stream which includes solids residue material, the preasphaltene-rich stream comprised of benzene insolubles, pyridine solubles, pyridine insolubles and ash; (8) recycling at least a portion of the preasphaltene-rich stream together with the solid residue material as process solvent, with less than 10 percent of the process solvent comprising asphaltenes; (9) withdrawing the asphaltene-rich stream and passing the asphaltene-rich stream to a solvent recovery system to yield an asphaltene-rich product stream and an extraction solvent stream.

  13. Recycling Endosomes and Viral Infection

    PubMed Central

    Vale-Costa, Sílvia; Amorim, Maria João

    2016-01-01

    Many viruses exploit specific arms of the endomembrane system. The unique composition of each arm prompts the development of remarkably specific interactions between viruses and sub-organelles. This review focuses on the viral–host interactions occurring on the endocytic recycling compartment (ERC), and mediated by its regulatory Ras-related in brain (Rab) GTPase Rab11. This protein regulates trafficking from the ERC and the trans-Golgi network to the plasma membrane. Such transport comprises intricate networks of proteins/lipids operating sequentially from the membrane of origin up to the cell surface. Rab11 is also emerging as a critical factor in an increasing number of infections by major animal viruses, including pathogens that provoke human disease. Understanding the interplay between the ERC and viruses is a milestone in human health. Rab11 has been associated with several steps of the viral lifecycles by unclear processes that use sophisticated diversified host machinery. For this reason, we first explore the state-of-the-art on processes regulating membrane composition and trafficking. Subsequently, this review outlines viral interactions with the ERC, highlighting current knowledge on viral-host binding partners. Finally, using examples from the few mechanistic studies available we emphasize how ERC functions are adjusted during infection to remodel cytoskeleton dynamics, innate immunity and membrane composition. PMID:27005655

  14. Waste tire recycling by pyrolysis

    SciTech Connect

    Not Available

    1992-10-01

    This project examines the City of New Orleans' waste tire problem. Louisiana State law, as of January 1, 1991, prohibits the knowing disposal of whole waste tires in landfills. Presently, the numerous waste tire stockpiles in New Orleans range in size from tens to hundreds of tires. New Orleans' waste tire problem will continue to increase until legal disposal facilities are made accessible and a waste tire tracking and regulatory system with enforcement provisions is in place. Tires purchased outside of the city of New Orleans may be discarded within the city's limits; therefore, as a practical matter this study analyzes the impact stemming from the entire New Orleans metropolitan area. Pyrolysis mass recovery (PMR), a tire reclamation process which produces gas, oil, carbon black and steel, is the primary focus of this report. The technical, legal and environmental aspects of various alternative technologies are examined. The feasibility of locating a hypothetical PMR operation within the city of New Orleans is analyzed based on the current economic, regulatory, and environmental climate in Louisiana. A thorough analysis of active, abandoned, and proposed Pyrolysis operations (both national and international) was conducted as part of this project. Siting a PMR plant in New Orleans at the present time is technically feasible and could solve the city's waste tire problem. Pending state legislation could improve the city's ability to guarantee a long term supply of waste tires to any large scale tire reclamation or recycling operation, but the local market for PMR end products is undefined.

  15. A mechanism for crustal recycling on Venus

    NASA Technical Reports Server (NTRS)

    Lenardic, A.; Kaula, W. M.; Bindschadler, D. L.

    1993-01-01

    Entrainment of lower crust by convective mantle downflows is proposed as a crustal recycling mechanism on Venus. The mechanism is characterized by thin sheets of crust being pulled into the mantle by viscous flow stresses. Finite element models of crust/mantle interaction are used to explore tectonic conditions under which crustal entrainment may occur. The recycling scenarios suggested by the numerical models are analogous to previously studied problems for which analytic and experimental relationships assessing entrainment rates have been derived. We use these relationships to estimate crustal recycling rates on Venus. Estimated rates are largely determined by (1) strain rate at the crust/mantle interface (higher strain rate leads to greater entrainment); and (2) effective viscosity of the lower crust (viscosity closer to that of mantle lithosphere leads to greater entrainment). Reasonable geologic strain rates and available crustal flow laws suggest entrainment can recycle approximately equal 1 cu km of crust per year under favorable conditions.

  16. Design and optimization of photovoltaics recycling infrastructure.

    PubMed

    Choi, Jun-Ki; Fthenakis, Vasilis

    2010-11-15

    With the growing production and installation of photovoltaics (PV) around the world constrained by the limited availability of resources, end-of-life management of PV is becoming very important. A few major PV manufacturers currently are operating several PV recycling technologies at the process level. The management of the total recycling infrastructure, including reverse-logistics planning, is being started in Europe. In this paper, we overview the current status of photovoltaics recycling planning and discuss our mathematic modeling of the economic feasibility and the environmental viability of several PV recycling infrastructure scenarios in Germany; our findings suggest the optimum locations of the anticipated PV take-back centers. Short-term 5-10 year planning for PV manufacturing scraps is the focus of this article. Although we discuss the German situation, we expect the generic model will be applicable to any region, such as the whole of Europe and the United States. PMID:20886824

  17. Fermilab Recycler damper requirements and design

    SciTech Connect

    Crisp, J.; Hu, M.; Tupikov, V.; /Fermilab

    2005-05-01

    The design of transverse dampers for the Fermilab Recycler storage ring is described. An observed instability and analysis of subsequent measurements where used to identify the requirements. The digital approach being implemented is presented.

  18. Technology development for lunar base water recycling

    NASA Technical Reports Server (NTRS)

    Schultz, John R.; Sauer, Richard L.

    1992-01-01

    This paper will review previous and ongoing work in aerospace water recycling and identify research activities required to support development of a lunar base. The development of a water recycle system for use in the life support systems envisioned for a lunar base will require considerable research work. A review of previous work on aerospace water recycle systems indicates that more efficient physical and chemical processes are needed to reduce expendable and power requirements. Development work on biological processes that can be applied to microgravity and lunar environments also needs to be initiated. Biological processes are inherently more efficient than physical and chemical processes and may be used to minimize resupply and waste disposal requirements. Processes for recovering and recycling nutrients such as nitrogen, phosphorus, and sulfur also need to be developed to support plant growth units. The development of efficient water quality monitors to be used for process control and environmental monitoring also needs to be initiated.

  19. Evaluation of radioactive scrap metal recycling

    SciTech Connect

    Nieves, L.A.; Chen, S.Y.; Kohout, E.J.; Nabelssi, B.; Tilbrook, R.W.; Wilson, S.E.

    1995-12-01

    This report evaluates the human health risks and environmental and socio-political impacts of options for recycling radioactive scrap metal (RSM) or disposing of and replacing it. Argonne National Laboratory (ANL) is assisting the US Department of Energy (DOE), Office of Environmental Restoration and Waste Management, Oak Ridge Programs Division, in assessing the implications of RSM management alternatives. This study is intended to support the DOE contribution to a study of metal recycling being conducted by the Task Group on Recycling and Reuse of the Organization for Economic Cooperation and Development. The focus is on evaluating the justification for the practice of recycling RSM, and the case of iron and steel scrap is used as an example in assessing the impacts. To conduct the evaluation, a considerable set of data was compiled and developed. Much of this information is included in this document to provide a source book of information.

  20. Recycle device for circulating fluidized bed boilers

    SciTech Connect

    Wang, Q.; Luo, Z.Y.; Li, X.T.; Cheng, F.; Ni, M.J.; Cen, K.

    1997-12-31

    Because the pressure at the outlet of a separator is lower than that at an inlet of a furnace, a recycle device is one of the most important components of circulating fluidized bed boilers for handling circulating ash. Although it has been extensively used in circulating fluidized bed boilers, its properties have not yet been well understood. Many experiments have been conducted for a kind of recycle device and the operational properties were obtained. The experimental results show that the structure of the recycle device and aeration conditions have a strong influence on the solid flow rate and operational stability of the recycle device. The authors will discuss the effect of the major parameters, such as opening and aeration air at different locations, on solids flow rate. The operational considerations will be given in this paper.

  1. Recycle with Heating: A Laboratory Experiment.

    ERIC Educational Resources Information Center

    Foord, A.; Mason, G.

    1985-01-01

    Describes an apparatus (built from domestic plumbing pipes and fittings) that uses only water and electricity (as consumables) to investigate basic mass and heat balances in a system with recycle. Also describes experiments using the apparatus. (JN)

  2. BWR Assembly Optimization for Minor Actinide Recycling

    SciTech Connect

    G. Ivan Maldonado; John M. Christenson; J.P. Renier; T.F. Marcille; J. Casal

    2010-03-22

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs).

  3. Plastics waste trashes German recycling scheme

    SciTech Connect

    Chynoweth, E.

    1993-06-30

    Plastics waste is causing a major headache for Duales System Deutschland (DSD: Bonn), one of Europe`s groundbreaking national packaging recycling programs. Five of Germany`s states have threatened to withdraw from the plan mainly because of the lack of plastics recycling capacity, says a DSD spokeswoman. {open_quotes}The pace of establishing recycling capacity does not meet the zeal in collection.{close_quotes} she notes. In addition, the organization has been crippled by a lack of funds. It claims that up to half the subscribers to the scheme - who pay a fee to display a green dot on packaging - are either irregular payers or not paying fees in proportion to their use of the green dot. The cost of setting up and paying for plastics recycling - not originally part of DSD`s responsibility - is also hurting the organization.

  4. Aluminum: Recycling of Aluminum Dross/Saltcake

    SciTech Connect

    Blazek, S.

    1999-01-29

    As this NICE3 publication details, the objective of this project is to commercialize the process technology to eliminate all landfill waste associated with black dross and saltcake generated from aluminum recycling in the United States.

  5. 16 CFR 260.12 - Recyclable claims.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... suggested in § 260.12(b)(2). Example 5: Foam polystyrene cups are advertised as “Recyclable in the few communities with facilities for foam polystyrene cups.” A half-dozen major metropolitan areas have...

  6. 16 CFR 260.12 - Recyclable claims.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... suggested in § 260.12(b)(2). Example 5: Foam polystyrene cups are advertised as “Recyclable in the few communities with facilities for foam polystyrene cups.” A half-dozen major metropolitan areas have...

  7. Overview of Portal Monitoring at Border Crossings

    SciTech Connect

    Geelhood, Bruce D.; Ely, James H.; Hansen, Randy R.; Kouzes, Richard T.; Schweppe, John E.; Warner, Ray A.

    2003-10-01

    The Bureau of Customs and Border Protection has the task of interdicting illicit radioactive material at ports of entry. Items of concern include radiation dispersal devices (RDD), nuclear warheads, and special nuclear material (SNM). The preferred survey method screens all vehicles in primary and diverts questionable vehicles to secondary. This requires high detection probability in primary while not overwhelming secondary with alarms, which could include naturally occurring radioactive material (NORM) found in acceptable cargo and radionuclides used in medical procedures. Sensitive alarm algorithms must accommodate the baseline depression observed whenever a vehicle enters the portal. Energy-based algorithms can effectively use the crude energy information available from a plastic scintillator to distinguish NORM from SNM. Whenever NORM cargo limits the alarm threshold, energy-based algorithms produce significantly better detection probabilities for small SNM sources than gross-count algorithms. Algorithms can be best evaluated using a large empirical data set to 1) calculate false alarm probabilities, 2) select sigma-level thresholds for operationally acceptable false alarm rates, and 3) determine detection probabilities for marginally detectable pseudo sources of SNM.

  8. Ocean drilling bordering the South American continent

    SciTech Connect

    Rabinowitz, P.D.; Francis, T.J.G.; Baldauf, J.G.; Allan, J.F. )

    1993-02-01

    The Ocean Drilling Program (ODP) has completed three expeditions bordering South America and is in the planning stages of a further expedition. The first cruise, Leg 110, drilled at six sites on a transect across the structural boundary between the overthrusting Barbados Ridge Complex and Atlantic abyssal plain (Caribbean/Atlantic Plate Boundary) in order to investigate structural, hydrological, and diagenetic effects of the transition from undeformed deep sea sediments to stratally disrupted melange on land. The second cruise, Leg 112, drilled ten sites to investigate the geological and paleoceanographic history of the area between the Peru Trench (which marks the suture between the Nazca and South American Plates) and the Peruvian coast. A third cruise, Leg 1 41, drilled the Chile Triple Junction, which represents the only presently active ridge-crest subduction and the physical properties and geochemistry of gas hydrates in oceanic sediments. A fourth cruise off South America is presently in the planning stage by the international science community. This proposed paleoceanographic transect is on the Ceara Rise off northern Brazil and has a proposed objective, amongst others, of studying the history of deep water flow of the Atlantic during the Cenozoic with an emphasis on the relationships between deep water circulation chemistry and the Earth's climate. This paper focuses on the significant scientific results of the above cruises and discusses future plans off South America.

  9. Cosmetic Lateral Canthoplasty: Preserving the Lateral Canthal Angle.

    PubMed

    Kim, Yeon-Jun; Lee, Kyu Ho; Choi, Hong Lim; Jeong, Eui Cheol

    2016-07-01

    Cosmetic lateral canthoplasty, in which the size of the eye is increased by extending the palpebral fissure and decreasing the degree of the eye slant, has become a prevalent procedure for East Asians. However, it is not uncommon for there to be complications or unfavorable results after the surgery. With this in mind, the authors have designed a surgical method to reduce complications in cosmetic lateral canthoplasty by preserving the lateral canthal angle. We discuss here the anatomy required for surgery, the surgical methods, and methods for reducing complications during cosmetic lateral canthoplasty. PMID:27462563

  10. Cosmetic Lateral Canthoplasty: Preserving the Lateral Canthal Angle

    PubMed Central

    Lee, Kyu Ho; Choi, Hong Lim; Jeong, Eui Cheol

    2016-01-01

    Cosmetic lateral canthoplasty, in which the size of the eye is increased by extending the palpebral fissure and decreasing the degree of the eye slant, has become a prevalent procedure for East Asians. However, it is not uncommon for there to be complications or unfavorable results after the surgery. With this in mind, the authors have designed a surgical method to reduce complications in cosmetic lateral canthoplasty by preserving the lateral canthal angle. We discuss here the anatomy required for surgery, the surgical methods, and methods for reducing complications during cosmetic lateral canthoplasty. PMID:27462563

  11. Solid waste recycling in Rajshahi city of Bangladesh.

    PubMed

    Bari, Q Hamidul; Hassan, K Mahbub; Haque, M Ehsanul

    2012-11-01

    Efficient recycling of solid wastes is now a global concern for a sustainable and environmentally sound management. In this study, traditional recycling pattern of solid waste was investigated in Rajshahi municipality which is the fourth largest city of Bangladesh. A questionnaire survey had been carried out in various recycle shops during April 2010 to January 2011. There were 140 recycle shops and most of them were located in the vicinity of Stadium market in Rajshahi. About 1906 people were found to be involved in recycling activities of the city. The major fraction of recycled wastes were sent to capital city Dhaka for further manufacture of different new products. Only a small amount of wastes, specially plastics, were processed in local recycle factories to produce small washing pots and bottle caps. Everyday, an estimated 28.13 tons of recycled solid wastes were handled in Rajshahi city area. This recycled portion accounted for 8.25% of the daily total generated wastes (341 ton d(-1)), 54.6% of total recyclable wastes (51.49 ton d(-1)) and 68.29% of readily recyclable wastes (41.19 ton d(-1)). Major recycled materials were found to be iron, glass, plastic, and papers. Only five factories were involved in preliminary processing of recyclable wastes. Collecting and processing secondary materials, manufacturing recycled-content products, and then buying recycled products created a circle or loop that ensured the overall success of recycling and generated a host of financial, environmental, and social returns. PMID:22749721

  12. RECYCLE OF MODIFIED FLY ASH FROM FURNACE SORBENT INJECTION

    EPA Science Inventory

    The paper discusses technical and economic studies to assess the impact of recycle on the furnace sorbent injection process. Levelized costs of various recycle schemes were compared to baseline (non-recycle) costs using the EPA LIMB Cost Model and the LIMB Recycle Model. Laborato...

  13. Pavement recycling. Executive summary and report

    SciTech Connect

    1995-10-01

    The Federal Highway Administration (FHWA) initiated Demonstration Project 39 (DP 39) Recycling Asphalt Pavements in June 1976. The project showed that asphalt pavement recycling was a technically viable rehabitation technique, and it was estimated that the use of reclaimed asphalt pavement (RAP) would amount to approximately 15 percent of the total hot-mix asphalt (HMA) production by the mid-1980s. It was expected that most of the asphalt pavement removed would be reused in new pavement construction or overlays.

  14. Paper recycling: ERI rolls with the punches

    SciTech Connect

    Lieb, K.

    1993-10-01

    At a time when many independent recycling companies are struggling to survive, Environmental Recycling, Inc. (ERI) maintains more than 600 accounts and is making a profit. ERI, an intermediate processor in Alexandria, Virginia combines elements of hauling and dealing. Paper is collected from mail houses, municipality contracts, federal contracts, and routine pick-ups and drop-offs in several municipalities around Virginia, Washington D.C., and Maryland. Creative marketing allows the company to stay afloat, and even thrive.

  15. Plastic Recycling Experiments in Materials Education

    NASA Technical Reports Server (NTRS)

    Liu, Ping; Waskom, Tommy L.

    1996-01-01

    The objective of this project was to introduce a series of plastic recycling experiments to students in materials-related courses such as materials science, material technology and materials testing. With the plastic recycling experiments, students not only can learn the fundamentals of plastic processing and properties as in conventional materials courses, but also can be exposed to the issue of materials life cycle and the impact on society and environment.

  16. New approaches for MOX multi-recycling

    SciTech Connect

    Gain, T.; Bouvier, E.; Grosman, R.; Senentz, G.H.; Lelievre, F.; Bailly, F.; Brueziere, J.; Murray, P.

    2013-07-01

    Due to its low fissile content after irradiation, Pu from used MOX fuel is considered by some as not recyclable in LWR (Light Water Reactors). The point of this paper is hence to go back to those statements and provide a new analysis based on AREVA extended experience in the fields of fissile and fertile material management and optimized waste management. This is done using the current US fuel inventory as a case study. MOX Multi-recycling in LWRs is a closed cycle scenario where U and Pu management through reprocessing and recycling leads to a significant reduction of the used assemblies to be stored. The recycling of Pu in MOX fuel is moreover a way to maintain the self-protection of the Pu-bearing assemblies. With this scenario, Pu content is also reduced repetitively via a multi-recycling of MOX in LWRs. Simultaneously, {sup 238}Pu content decreases. All along this scenario, HLW (High-Level Radioactive Waste) vitrified canisters are produced and planned for deep geological disposal. Contrary to used fuel, HLW vitrified canisters do not contain proliferation materials. Moreover, the reprocessing of used fuel limits the space needed on current interim storage. With MOX multi-recycling in LWR, Pu isotopy needs to be managed carefully all along the scenario. The early introduction of a limited number of SFRs (Sodium Fast Reactors) can therefore be a real asset for the overall system. A few SFRs would be enough to improve the Pu isotopy from used LWR MOX fuel and provide a Pu-isotopy that could be mixed back with multi-recycled Pu from LWRs, hence increasing the Pu multi-recycling potential in LWRs.

  17. Antiproton Cooling in the Fermilab Recycler Ring

    SciTech Connect

    Nagaitsev, S.; Broemmelsiek, D.; Burov, A.; Carlson, K.; Gattuso, C.; Hu, M.; Kramper, B.; Kroc, T.; Leibfritz, J.; Prost, L.; Pruss, S.; Saewert, G.; Schmidt, C. W.; Shemyakin, A.; Sutherland, M.; Tupikov, V.; Warner, A.; Bolshakov, A.; Zenkevich, P.; Kazakevich, G.

    2006-03-20

    The 8.9-GeV/c Recycler antiproton storage ring is equipped with both stochastic and electron cooling systems. These cooling systems are designed to assist accumulation of antiprotons for the Tevatron collider operations. In this paper we report on an experimental demonstration of electron cooling of high-energy antiprotons. At the time of writing this report, the Recycler electron cooling system is routinely used in collider operations. It has helped to set recent peak luminosity records.

  18. Antiproton cooling in the Fermilab Recycler Ring

    SciTech Connect

    Nagaitsev, S.; Bolshakov, A.; Broemmelsiek, D.; Burov, Alexey V.; Carlson, K.; Gattuso, C.; Hu, M.; Kazakevich, G.; Kramper, B.; Kroc, T.; Leibfritz, J.; Prost, L.; Pruss, S.; Saewert, G; Schmidt, C.W.; Seletskiy, S.; Shemyakin, A.; Sutherland, M.; Tupikov, V.; Warner, A.; Zenkevich, P.; /Fermilab /Moscow, ITEP /Novosibirsk, IYF /Rochester U.

    2005-12-01

    The 8.9-GeV/c Recycler antiproton storage ring is equipped with both stochastic and electron cooling systems. These cooling systems are designed to assist accumulation of antiprotons for the Tevatron collider operations. In this paper we report on an experimental demonstration of electron cooling of high-energy antiprotons. At the time of writing this report, the Recycler electron cooling system is routinely used in collider operations. It has helped to set recent peak luminosity records.

  19. The current status of scrap metal recycling

    NASA Astrophysics Data System (ADS)

    Spoel, Han

    1990-04-01

    Although millions of tonnes of metals are recycled around the world every year, even more can be done if the proper economic incentives are present. Increasing the rate of recycle will slow the growth of primary production and reduce the potential for environmental overload. But to progress beyond the present state of affairs, public opinion, regulations and economics must combine to encourage the responsible reprocessing of metal wastes.

  20. The value and feasibility of proactive recycling

    NASA Astrophysics Data System (ADS)

    Fthenakis, V. M.; Moskowitz, P. D.

    1999-03-01

    Photovoltaics (PV) technology has definite environmental advantages over competing electricity generation technologies, and so far these advantages have driven market penetration. The PV industry follows a pro-active approach to preserve its safe and environmentally friendly nature. Industrial ecology considerations raise the issue of what to do with the PV modules at the end of their useful life. One option is recycling. This paper discusses the value of proactive recycling and compares several alternatives.

  1. Amyotrophic lateral sclerosis

    PubMed Central

    Wijesekera, Lokesh C; Leigh, P Nigel

    2009-01-01

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease characterised by progressive muscular paralysis reflecting degeneration of motor neurones in the primary motor cortex, corticospinal tracts, brainstem and spinal cord. Incidence (average 1.89 per 100,000/year) and prevalence (average 5.2 per100,000) are relatively uniform in Western countries, although foci of higher frequency occur in the Western Pacific. The mean age of onset for sporadic ALS is about 60 years. Overall, there is a slight male prevalence (M:F ratio~1.5:1). Approximately two thirds of patients with typical ALS have a spinal form of the disease (limb onset) and present with symptoms related to focal muscle weakness and wasting, where the symptoms may start either distally or proximally in the upper and lower limbs. Gradually, spasticity may develop in the weakened atrophic limbs, affecting manual dexterity and gait. Patients with bulbar onset ALS usually present with dysarthria and dysphagia for solid or liquids, and limbs symptoms can develop almost simultaneously with bulbar symptoms, and in the vast majority of cases will occur within 1–2 years. Paralysis is progressive and leads to death due to respiratory failure within 2–3 years for bulbar onset cases and 3–5 years for limb onset ALS cases. Most ALS cases are sporadic but 5–10% of cases are familial, and of these 20% have a mutation of the SOD1 gene and about 2–5% have mutations of the TARDBP (TDP-43) gene. Two percent of apparently sporadic patients have SOD1 mutations, and TARDBP mutations also occur in sporadic cases. The diagnosis is based on clinical history, examination, electromyography, and exclusion of 'ALS-mimics' (e.g. cervical spondylotic myelopathies, multifocal motor neuropathy, Kennedy's disease) by appropriate investigations. The pathological hallmarks comprise loss of motor neurones with intraneuronal ubiquitin-immunoreactive inclusions in upper motor neurones and TDP-43 immunoreactive inclusions in

  2. Social and cultural influences among Mexican border entrepreneurs.

    PubMed

    Díaz Bretones, Francisco; Cappello, Héctor M; Garcia, Pedro A

    2009-06-01

    Social and cultural conditions (including U.S. border and inland influence, role models within the family, and educational background) which affect locus of control and achievement motivation among Mexican entrepreneurs were explored among 64 selected entrepreneurs in two Mexican towns, one on the Mexico-U.S. border, the other located inland. Analyses showed that the border subsample scored higher on External locus of control; however, in both subsamples the father was an important element in the locus of control variable and the entrepreneur status. No statistically significant mean difference was noted for achievement motivation. Practical applications and limitations are discussed. PMID:19708411

  3. Auditing Operating Room Recycling: A Management Case Report.

    PubMed

    McGain, Forbes; Jarosz, Katherine Maria; Nguyen, Martin Ngoc Hoai Huong; Bates, Samantha; O'Shea, Catherine Jane

    2015-08-01

    Much waste arises from operating rooms (ORs). We estimated the practical and financial feasibility of an OR recycling program, weighing all waste from 6 ORs in Melbourne, Australia. Over 1 week, 237 operations produced 1265 kg in total: general waste 570 kg (45%), infectious waste 410 kg (32%), and recyclables 285 kg (23%). The achieved recycling had no infectious contamination. The achieved recycling/potential recycling rate was 285 kg/517 kg (55%). The average waste disposal costs were similar for general waste and recycling. OR recycling rates of 20%-25% total waste were achievable without compromising infection control or financial constraints. PMID:26230308

  4. Photon recycling in lead iodide perovskite solar cells.

    PubMed

    Pazos-Outón, Luis M; Szumilo, Monika; Lamboll, Robin; Richter, Johannes M; Crespo-Quesada, Micaela; Abdi-Jalebi, Mojtaba; Beeson, Harry J; Vrućinić, Milan; Alsari, Mejd; Snaith, Henry J; Ehrler, Bruno; Friend, Richard H; Deschler, Felix

    2016-03-25

    Lead-halide perovskites have emerged as high-performance photovoltaic materials. We mapped the propagation of photogenerated luminescence and charges from a local photoexcitation spot in thin films of lead tri-iodide perovskites. We observed light emission at distances of ≥50 micrometers and found that the peak of the internal photon spectrum red-shifts from 765 to ≥800 nanometers. We used a lateral-contact solar cell with selective electron- and hole-collecting contacts and observed that charge extraction for photoexcitation >50 micrometers away from the contacts arose from repeated recycling between photons and electron-hole pairs. Thus, energy transport is not limited by diffusive charge transport but can occur over long distances through multiple absorption-diffusion-emission events. This process creates high excitation densities within the perovskite layer and allows high open-circuit voltages. PMID:27013728

  5. Photon recycling in lead iodide perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Pazos-Outón, Luis M.; Szumilo, Monika; Lamboll, Robin; Richter, Johannes M.; Crespo-Quesada, Micaela; Abdi-Jalebi, Mojtaba; Beeson, Harry J.; Vrućinić, Milan; Alsari, Mejd; Snaith, Henry J.; Ehrler, Bruno; Friend, Richard H.; Deschler, Felix

    2016-03-01

    Lead-halide perovskites have emerged as high-performance photovoltaic materials. We mapped the propagation of photogenerated luminescence and charges from a local photoexcitation spot in thin films of lead tri-iodide perovskites. We observed light emission at distances of ≥50 micrometers and found that the peak of the internal photon spectrum red-shifts from 765 to ≥800 nanometers. We used a lateral-contact solar cell with selective electron- and hole-collecting contacts and observed that charge extraction for photoexcitation >50 micrometers away from the contacts arose from repeated recycling between photons and electron-hole pairs. Thus, energy transport is not limited by diffusive charge transport but can occur over long distances through multiple absorption-diffusion-emission events. This process creates high excitation densities within the perovskite layer and allows high open-circuit voltages.

  6. Utility Plastic Recycling, Inc.: Closing the loop in-house

    SciTech Connect

    Harrison, S.

    1995-07-01

    Despite current favorable markets, ``closing the loop`` in recycling can remain a vexing problem. New York City`s Utility Plastic Recycling, Inc., has eliminated some of the guesswork by manufacturing recycled products on the premises of its materials recovery facility (MRF). Utility Plastic is a member of the Waste Management of New York (WMNY) family of companies that also includes JLJ Recycling, Commercial Recycling Technology, and Evergreen Recycling. The company is a third-generation firm that began commercially recycling glass and cardboard collected from the Knickerbocker Brewery in 1928. WMNY`s service in every aspect of recycling -- including program planning and implementation, collection, processing, manufacturing, and marketing -- makes them one of the first true close-loop recyclers. Processing almost half of the recyclables in New York City`s residential program, in addition to materials collected from several suburban communities and thousands of commercial contracts, also makes them one of the largest.

  7. Isotopic constraints on crustal growth and recycling

    NASA Technical Reports Server (NTRS)

    Jacobsen, Stein B.

    1988-01-01

    The Sm-Nd isotopic data on clastic and chemical sediments are used with the present-day age distribution of continental crustal rocks to estimate the rates of crustal accretion, growth and recycling throughout earth's history. A new method for interpreting Nd model ages on both chemical and clastic sediments is proposed. A general relationship is derived between the mean crustal residence time of material recycled from the crust to the mantle (i.e., sediments), the mean age of the crust, and the crustal growth and recycling rates. This relationship takes into account the fact that the age distribution of material in the continental crust is generally different from the age distribution of material recycled into the mantle. The episodic nature of the present-day age distribution in crustal rocks results in similar episodicity in the accretion and recycling rates. The results suggest that by about 3.8 Ga ago, about 40 percent of the present continental volume was present. Recycling rates were extremely high 3-4 Ga ago and declined rapidly to an insignificant value of about 0.1 cu km/a during most of the Phanerozoic. The Nd model age pattern on sediments suggests a fairly high rate of growth during the Phanerozoic.

  8. Paper recycling framework, the "Wheel of Fiber".

    PubMed

    Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

    2016-06-01

    At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber. PMID:26994970

  9. Economic Feasibility of Recycling Photovoltaic Modules

    SciTech Connect

    Choi, J.K.; Fthenakis, V.

    2010-12-01

    The market for photovoltaic (PV) electricity generation has boomed over the last decade, and its expansion is expected to continue with the development of new technologies. Taking into consideration the usage of valuable resources and the generation of emissions in the life cycle of photovoltaic technologies dictates proactive planning for a sound PV recycling infrastructure to ensure its sustainability. PV is expected to be a 'green' technology, and properly planning for recycling will offer the opportunity to make it a 'double-green' technology - that is, enhancing life cycle environmental quality. In addition, economic feasibility and a sufficient level of value-added opportunity must be ensured, to stimulate a recycling industry. In this article, we survey mathematical models of the infrastructure of recycling processes of other products and identify the challenges for setting up an efficient one for PV. Then we present an operational model for an actual recycling process of a thin-film PV technology. We found that for the case examined with our model, some of the scenarios indicate profitable recycling, whereas in other scenarios it is unprofitable. Scenario SC4, which represents the most favorable scenario by considering the lower bounds of all costs and the upper bound of all revenues, produces a monthly profit of $107,000, whereas the least favorable scenario incurs a monthly loss of $151,000. Our intent is to extend the model as a foundation for developing a framework for building a generalized model for current-PV and future-PV technologies.

  10. Recycling in the states: 1993 update

    SciTech Connect

    Miller, C.

    1994-03-01

    1993 was a slow year for recycling legislation. As in 1992, most states only tinkered with previously enacted laws. On the national level, Congress didn't even tinker and no new recycling laws were passed. Most state action in 1993 focused on market development. While markets remain weak, none of the states have repealed their existing recycling rate mandates, despite the high cost of recycling. Recycling's biggest boost in 1993 came from President Clinton's Executive Order establishing recycled content levels for federal purchases of printing and writing paper. Released on October 20, the order directs every federal agency to purchase printing and writing paper containing 20% post-consumer material by the end of 1994 and 30% post-consumer material by the end of 1998. The order does, however, allow sawdust to be counted as post-consumer material. President Clinton also required federal agencies to use re-refined oil and to replace virgin tires with retreads. Perhaps most importantly, the order requires federal agencies to revise their procurement specifications and standards so that recovered materials can be used to make federally bought products.

  11. Quality requirements for reclaimed/recycled water

    NASA Technical Reports Server (NTRS)

    Janik, Daniel S.; Sauer, Richard L.; Pierson, Duane L.; Thorstenson, Yvonne R.

    1987-01-01

    Water used during current and previous space missions has been either carried or made aloft. Future human space endeavors will require some form of water reclamation and recycling. There is little experience in the U.S. space program with this technology. Water reclamation and recycling constitute engineering challenges of the broadest nature that will require an intensive research and development effort if this technology is to mature in time for practical use on the proposed U.S. Space Station. In order for this to happen, reclaimed/recycled water specifications will need to be devised to guide engineering development. Present NASA Potable Water Specifications are not applicable to reclaimed or recycled water. Adequate specifications for ensuring the quality of the reclaimed or recycled potable water system is reviewed, limitations of present water specifications are examined, world experience with potable water reclamation/recycling systems and systems analogs is reviewed, and an approach to developing pertinent biomedical water specifications for spacecraft is presented. Space Station water specifications should be designed to ensure the health of all likely spacecraft inhabitants including man, animals, and plants.

  12. Perspectives on recycling centres and future developments.

    PubMed

    Engkvist, I-L; Eklund, J; Krook, J; Björkman, M; Sundin, E

    2016-11-01

    The overall aim of this paper is to draw combined, all-embracing conclusions based on a long-term multidisciplinary research programme on recycling centres in Sweden, focussing on working conditions, environment and system performance. A second aim is to give recommendations for their development of new and existing recycling centres and to discuss implications for the future design and organisation. Several opportunities for improvement of recycling centres were identified, such as design, layout, ease with which users could sort their waste, the work environment, conflicting needs and goals within the industry, and industrialisation. Combining all results from the research, which consisted of different disciplinary aspects, made it possible to analyse and elucidate their interrelations. Waste sorting quality was recognized as the most prominent improvement field in the recycling centre system. The research identified the importance of involving stakeholders with different perspectives when planning a recycling centre in order to get functionality and high performance. Practical proposals of how to plan and build recycling centres are given in a detailed checklist. PMID:26826952

  13. Petrology of the Upper Border Series of the Skaergaard Intrusion

    NASA Astrophysics Data System (ADS)

    Salmonsen, L.; Tegner, C.; Jakobsen, J. K.

    2009-12-01

    The Upper Border Series crystallized downwards from the roof of the Skaergaard magma chamber. It met with the Layered Series that crystallized upwards from the floor in the Sandwich Horizon that contains the last and most evolved rocks of the intrusion. Previous investigations of the Upper Border Series (Naslund, 1984) have shown that the compositional trends of plagioclase, olivine and pyroxene largely mirror those of the Layered Series. At the same time it was argued that the crystallization sequence in Upper Border Series differed from the Layered Series in that apatite precipitated before magnetite that, in turn, appeared before Ca-rich pyroxene. From the existing data the magma from which the Upper Border Series crystallized was inferred to be enriched in SiO2, K2O, P2O5 and H2O relative to the magma in the lower parts of the intrusion. This has lead to the conception that the Upper Border Series crystallized from a chemically different magma. Here we present new petrography, mineralogy and bulk compositions for samples collected in three profiles through the Upper Border Series (Kilen, Hammerpas and Brødretoppen transects). Although euhedral apatite is present throughout most of the Upper Border Series, we interpret a marked increase in modal apatite late in the crystallization sequence as marking its first appearance on the liquidus at the crystallization front. The plagioclase An% at this level in the Upper Border Series is ˜40 and is identical with plagioclase An% at the level of apatite-in in the Layered Series. Similarly, we find that the plagioclase An% at the onset of FeTi-oxide and sulphide precipitation in the Upper Border Series (52 and 47, respectively) and Layered Series are alike. Finally, we interpret abundant augite in Upper Border Series rocks before magnetite-in as a cumulus phase. We therefore conclude that the crystallization sequences of the two series are identical. The new bulk rock data reveal that the Upper Border Series and the

  14. DWPF RECYCLE EVAPORATOR FLOWSHEET EVALUATION (U)

    SciTech Connect

    Stone, M

    2005-04-30

    The Defense Waste Processing Facility (DWPF) converts the high level waste slurries stored at the Savannah River Site into borosilicate glass for long-term storage. The vitrification process results in the generation of approximately five gallons of dilute recycle streams for each gallon of waste slurry vitrified. This dilute recycle stream is currently transferred to the H-area Tank Farm and amounts to approximately 1,400,000 gallons of effluent per year. Process changes to incorporate salt waste could increase the amount of effluent to approximately 2,900,000 gallons per year. The recycle consists of two major streams and four smaller streams. The first major recycle stream is condensate from the Chemical Process Cell (CPC), and is collected in the Slurry Mix Evaporator Condensate Tank (SMECT). The second major recycle stream is the melter offgas which is collected in the Off Gas Condensate Tank (OGCT). The four smaller streams are the sample flushes, sump flushes, decon solution, and High Efficiency Mist Eliminator (HEME) dissolution solution. These streams are collected in the Decontamination Waste Treatment Tank (DWTT) or the Recycle Collection Tank (RCT). All recycle streams are currently combined in the RCT and treated with sodium nitrite and sodium hydroxide prior to transfer to the tank farm. Tank Farm space limitations and previous outages in the 2H Evaporator system due to deposition of sodium alumino-silicates have led to evaluation of alternative methods of dealing with the DWPF recycle. One option identified for processing the recycle was a dedicated evaporator to concentrate the recycle stream to allow the solids to be recycled to the DWPF Sludge Receipt and Adjustment Tank (SRAT) and the condensate from this evaporation process to be sent and treated in the Effluent Treatment Plant (ETP). In order to meet process objectives, the recycle stream must be concentrated to 1/30th of the feed volume during the evaporation process. The concentrated stream

  15. Molybdenum recycling in the United States in 1998

    USGS Publications Warehouse

    Blossom, John W.

    2002-01-01

    This report describes the flow of molybdenum in the United States in 1998 with emphasis on the extent to which molybdenum was recycled. Molybdenum was mostly recycled from products of molybdenum-bearing steels and superalloys, with some molybdenum products recovered specifically for their high molybdenum content. In 1998, 8,000 metric tons (t) of molybdenum was estimated to have been recycled, and the recycling rate was calculated to be 33 percent, with recycling efficiency at about 30 percent.

  16. Electroless nickel recycling via electrodialysis

    SciTech Connect

    Steffani, C.; Meltzer, M.

    1995-04-01

    Electroless nickel is widely used in the metal finishing industry as a coating. It plates evenly on a variety of surfaces and replicates or enhances the surface finish. It has high hardness and good corrosion resistance and machinability. However, its bath life is limited and it has a tendency to spontaneously plate out on the tank and associated equipment. These problems add to the cost per unit component plated. Also, expensive waste treatment is required before users can dispose of the spent solution. Electroless nickel`s limited bath life is inherent in its chemical make-up. Using hypophosphite as the reducing agent for the nickel ion generates by-products of nickel metal and orthophosphite. When the level of orthophosphite in the solution reaches a high concentration, the reaction slows and finally stops. The bath must be disposed of, and its treatment and replacement costs are high. Metal salts have a tendency to plate out because of the dissolved solids present, and this also makes it necessary to discard the bath. Lawrence Livermore National Laboratory (LLNL) has conducted a study of an electrodialysis process that can reduce both chemical purchases and disposal costs. Electrodialysis employs a membrane, deionized water, and an electromotive potential to separate the orthophosphite and other dissolved solids from the nickel ions. With the aid of the electromotive potential, the dissolved solids migrate across the membrane from the process solution into the water in the recycling unit`s holding cell. This migration lowers the total dissolved solids (TDS) in the process solution and improves plating performance. The dialysis process makes it possible to reuse the bath many times without disposal.

  17. Recycling of treated wood poles

    SciTech Connect

    Fansham, P.

    1995-11-01

    There are approximately 150 million utilities poles in service in North America. Of the 3 million poles removed from service each year, many poles still contain a sound and structurally intact core and only the outer layer has deteriorated. Since most of the old poles are treated with either pentachlorophenol or creosote there are limited disposal options available to pole users. The practice of giving old poles away to farmers or other interested parties in falling into disfavour since this practice does not absolve the utility of the environmental liability associated with the treated wood. TWT has commercialised a thermolysis (Pyrolysis) based process capable of removing oil based preservatives from treated wood. The patented process involves: the shaving of the weathered pole exterior; the rapid distillation of oil based preservatives in an oxygen depleted environment; condensation of the vapours; and separation of liquids. TWT has constructed a 30,000 pole per year facility east of Calgary and has provided recycled poles for the construction of two power lines now in use by TransAlta Utilities Corporation, Canada`s largest investor owned electric utility. TWT has tested two thermolysis (Pyrolysis) technologies and has determined that contact thermolysis using a heated auger design performed better and with less plugging than a fast fluid bed reactor. The fluid bed reactor is prone to coke formation and contamination of the oil by fine char particles. Residual PCP concentration in the shavings was reduced from 9500 ppm to 10 ppm. Leachate testing on the char yielded a PCP concentration of 1.43 ppm in the Leachate, well below the EPA standard maximum of 100 ppm.

  18. Waste tire recycling by pyrolysis

    SciTech Connect

    Not Available

    1992-10-01

    This project examines the City of New Orleans` waste tire problem. Louisiana State law, as of January 1, 1991, prohibits the knowing disposal of whole waste tires in landfills. Presently, the numerous waste tire stockpiles in New Orleans range in size from tens to hundreds of tires. New Orleans` waste tire problem will continue to increase until legal disposal facilities are made accessible and a waste tire tracking and regulatory system with enforcement provisions is in place. Tires purchased outside of the city of New Orleans may be discarded within the city`s limits; therefore, as a practical matter this study analyzes the impact stemming from the entire New Orleans metropolitan area. Pyrolysis mass recovery (PMR), a tire reclamation process which produces gas, oil, carbon black and steel, is the primary focus of this report. The technical, legal and environmental aspects of various alternative technologies are examined. The feasibility of locating a hypothetical PMR operation within the city of New Orleans is analyzed based on the current economic, regulatory, and environmental climate in Louisiana. A thorough analysis of active, abandoned, and proposed Pyrolysis operations (both national and international) was conducted as part of this project. Siting a PMR plant in New Orleans at the present time is technically feasible and could solve the city`s waste tire problem. Pending state legislation could improve the city`s ability to guarantee a long term supply of waste tires to any large scale tire reclamation or recycling operation, but the local market for PMR end products is undefined.

  19. International borders, ground water flow, and hydroschizophrenia.

    PubMed

    Jarvis, Todd; Giordano, Mark; Puri, Shammy; Matsumoto, Kyoko; Wolf, Aaron

    2005-01-01

    A substantial body of research has been conducted on transboundary water, transboundary water law, and the mitigation of transboundary water conflict. However, most of this work has focused primarily on surface water supplies. While it is well understood that aquifers cross international boundaries and that the base flow of international river systems is often derived in part from ground water, transboundary ground water and surface water systems are usually managed under different regimes, resulting in what has been described as "hydroschizophrenia." Adding to the problem, the hydrologic relationships between surface and ground water supplies are only known at a reconnaissance level in even the most studied international basins, and thus even basic questions regarding the territorial sovereignty of ground water resources often remain unaddressed or even unasked. Despite the tensions inherent in the international setting, riparian nations have shown tremendous creativity in approaching regional development, often through preventive diplomacy, and the creation of "baskets of benefits," which allow for positive-sum, integrative allocations of joint gains. In contrast to the notion of imminent water wars, the history of hydropolitical relations worldwide has been overwhelmingly cooperative. Limited ground water management in the international arena, coupled with the fact that few states or countries regulate the use of ground water, begs the question: will international borders serve as boundaries for increased "flows" of hydrologic information and communication to maintain strategic aquifers, or will increased competition for shared ground water resources lead to the potential loss of strategic aquifers and "no flows" for both ground water users? PMID:16149973

  20. Isolated medial meniscal tear in a Border Collie.

    PubMed

    Ridge, P A

    2006-01-01

    A three-year-old, female Border Collie was successfully treated for an isolated, torn, medial meniscus by arthroscopic meniscal tear resection. The dog returned to agility competition without recurrence of lameness. PMID:16810354

  1. The Great Drug Debate: III. Can the Borders be Sealed?

    ERIC Educational Resources Information Center

    Reuter, Peter

    1988-01-01

    Analyzes the effects of drug interdiction programs on smuggling. Concludes that the cost of increased emphasis on interdiction will not reduce the flow of drugs across international borders. Suggests greater emphasis on drug treatment programs. (FMW)

  2. Language Learning on the U.S.-Mexican Border.

    ERIC Educational Resources Information Center

    Baird, Scott; Kuravackal, Kate

    1998-01-01

    Describes modifications to the four original requirements of the foreign language program at the International School of the Americas, an experimental school located 150 miles from the Mexican border. (SR)

  3. Responsive regulation of cross-border assisted reproduction.

    PubMed

    Millbank, Jenni

    2015-12-01

    This article considers the question: how might Australian regulators constructively respond to the dynamic and complex challenges posed by cross-border assisted reproduction? To begin, the article summarises the available international scholarship and outlines what little we know about Australian cross-border reproductive travel. Of the three generally proposed responses to cross-border reproductive care (prohibition, harm minimisation and harmonisation), the article summarily rejects the first approach, and instead discusses a mixture of the latter two. The article proposes the beginnings of an immediate policy response aimed not at stopping cross-border practices per se, but rather at understanding and reducing the risks associated with them, as well as flagging the pursuit of more ambitious meta-goals such as developing more equitable and accessible treatment frameworks for assisted reproductive technology and encouraging domestic self-sufficiency in reproduction. PMID:26939503

  4. Aspects of the Romance-Germanic Language Border: An Introduction.

    ERIC Educational Resources Information Center

    Treffers-Daller, Jeanine; Willemyns, Roland

    2002-01-01

    Introduces this special issue of the journal. Articles cover the geographical length of of the Romance-Germanic border, from French Flanders in the northwest to South Tyrol in the Southeast. (Author/VWL)

  5. Mesopic luminance assessed with minimally distinct border perception.

    PubMed

    Raphael, Sabine; MacLeod, Donald I A

    2015-01-01

    In photopic vision, the border between two fields is minimally distinct when the two fields are isoluminant; that is, when the achromatic luminance of the two fields is equal. The distinctness of a border between extrafoveal reference and comparison fields was used here as an isoluminance criterion under a variety of adaptation conditions ranging from photopic to scotopic. The adjustment was done by trading off the amount of blue against the amount of red in the comparison field. Results show that isoluminant border settings are linear under all constant adaptation conditions, though varying with state of adaptation. The relative contribution of rods and cones to luminance was modeled such that the linear sum of the suitably weighted scotopic and photopic luminance is constant for the mesopic isoluminant conditions. The relative weights change with adapting intensity in a sigmoid fashion and also depend strongly on the position of the border in the visual field. PMID:26223024

  6. Statistical fractal border features for MRI breast mass images

    NASA Astrophysics Data System (ADS)

    Penn, Alan I.; Bolinger, Lizann; Loew, Murray H.

    1998-06-01

    MRI has been proposed as an alternative method to mammography for detecting and staging breast cancer. Recent studies have shown that architectural features of breast masses may be useful in improving specificity. Since fractal dimension (fd) has been correlated with roughness, and border roughness is an indicator of malignancy, the fd of the mass border is a promising architectural feature for achieving improved specificity. Previous methods of estimating the fd of the mass border have been unreliable because of limited data or overlay restrictive assumptions of the fractal model. We present preliminary results of a statistical approach in which a sample space of fd estimates is generated from a family of self-affine fractal models. The fd of the mass border is then estimated from the statistics of the sample space.

  7. Borders in Education and Living- a Case of Trench Warfare.

    PubMed

    Hviid, Pernille

    2016-03-01

    In this paper the notion of border will be examined in a cultural life course perspective. I will investigate borders as psycho-cultural constructions created to enable and control meaning-making in the intersection between subjects engagements and concerns and collectively constructed and guiding meanings. An empirical analysis of one boy's life course in and between home, school and a Leisure Time Activity Center in the years 1st to 3rd grade demonstrates a systemic construction of borders involving him, his teachers and his parents and renders the boy to choose between becoming an engaged pupil or a dedicated son. As such, the analysis can illuminate processes of school - home interactions that work opposite of what is intended and become detrimental to children's life. In a cultural life course perspective borders show how life is maintained as meaningful and not only guide the present living but also serve as directional guides into the future. PMID:26205071

  8. Mesopic luminance assessed with minimally distinct border perception

    PubMed Central

    Raphael, Sabine; MacLeod, Donald I. A.

    2015-01-01

    In photopic vision, the border between two fields is minimally distinct when the two fields are isoluminant; that is, when the achromatic luminance of the two fields is equal. The distinctness of a border between extrafoveal reference and comparison fields was used here as an isoluminance criterion under a variety of adaptation conditions ranging from photopic to scotopic. The adjustment was done by trading off the amount of blue against the amount of red in the comparison field. Results show that isoluminant border settings are linear under all constant adaptation conditions, though varying with state of adaptation. The relative contribution of rods and cones to luminance was modeled such that the linear sum of the suitably weighted scotopic and photopic luminance is constant for the mesopic isoluminant conditions. The relative weights change with adapting intensity in a sigmoid fashion and also depend strongly on the position of the border in the visual field. PMID:26223024

  9. 3. August, 1971. VIEW ALONG CANAL SHOWING BORDER PATH AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. August, 1971. VIEW ALONG CANAL SHOWING BORDER PATH AND BRIDGE FOR INSPECTION - ABOUT ONE MILE FROM CANAL HEAD. - Hurricane Irrigation Canal, State Route 15 Vicinity, Hurricane, Washington County, UT

  10. 1. Barn 3. NW corner. Border shed (Barn A) in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Barn 3. NW corner. Border shed (Barn A) in distance marks southern boundary of the original north barn area. Camera pointed SE. - Longacres, Barn 3, 1621 Southwest Sixteenth Street, Renton, King County, WA

  11. Irreducible Lateral Patellar Dislocation: A Case Report and Literature Review

    PubMed Central

    Grewal, Balvinder; Elliott, Devlin; Daniele, Luca; Reidy, James

    2016-01-01

    Background: Acute patellar dislocation is a common injury in young people, especially in adolescent females and athletes. Lateral dislocation is the most common form of patellar dislocation and often reduces spontaneously or with simple manipulation and closed reduction. We report a rare circumstance in which the patella was irreducible and required manipulation and closed reduction in the operating room. Case Report: While dancing, a 32-year-old female was knocked by a fellow dancer on her left knee, and she fell to the nightclub floor. She was unable to stand or bear weight because of the pain, and her knee was in fixed flexion with lateral displacement of the patella. Multiple attempts at closed reduction under sedation failed in the emergency department. Computed tomography (CT) images revealed a medial border patellar fracture and lipohemarthrosis that required closed reduction and manipulation in the operating room. The patient was placed in a Richards splint for follow-up and referred to a physiotherapist for conservative management. Conclusion: This case highlights the fact that some lateral patellar dislocations are irreducible on initial attempts, particularly if a fracture is present or another mechanism of impingement impedes relocation. CT imaging is a valuable diagnostic tool, and manipulation under anesthesia or open reduction in the operating room may be necessary. Our review of the literature further highlights the complexity and potential problems associated with treatment of locked lateral patellar dislocations. PMID:27303231

  12. Cross-border ties and Arab American mental health.

    PubMed

    Samari, Goleen

    2016-04-01

    Due to increasing discrimination and marginalization, Arab Americans are at a greater risk for mental health disorders. Social networks that include ties to the country of origin could help promote mental well-being in the face of discrimination. The role of countries of origin in immigrant mental health receives little attention compared to adjustment in destination contexts. This study addresses this gap by analyzing the relationship between nativity, cross-border ties, and psychological distress and happiness for Arab Americans living in the greater Detroit Metropolitan Area (N = 896). I expect that first generation Arab Americans will have more psychological distress compared to one and half, second, and third generations, and Arab Americans with more cross-border ties will have less psychological distress and more happiness. Data come from the 2003 Detroit Arab American Study, which includes measures of nativity, cross-border ties--attitudes, social ties, media consumption, and community organizations, and the Kessler-10 scale of psychological distress and self-reported happiness. Ordered logistic regression analyses suggest that psychological distress and happiness do not vary much by nativity alone. However, cross-border ties have both adverse and protective effects on psychological distress and happiness. For all generations of Arab Americans, cross-border attitudes and social ties are associated with greater odds of psychological distress and for first generation Arab Americans, media consumption is associated with greater odds of unhappiness. In contrast, for all generations, involvement in cross-border community organizations is associated with less psychological distress and for the third generation, positive cross-border attitudes are associated with higher odds of happiness. These findings show the complex relationship between cross-border ties and psychological distress and happiness for different generations of Arab Americans. PMID:26999416

  13. Cross-border reproductive care: a committee opinion.

    PubMed

    2013-09-01

    Cross-border reproductive care (CBRC) is a growing worldwide phenomenon, raising questions about why assisted reproductive technology (ART) patients travel abroad, what harms and benefits may result, and what duties health care providers may have in advising and treating patients who travel for reproductive services. Cross-border care offers benefits and poses harms to ART stakeholders, including patients, offspring, providers, gamete donors, gestational carriers, and local populations in destination countries. PMID:23523262

  14. SSL Demonstration: Area Lighting, Yuma Sector Border Patrol Area, AZ

    SciTech Connect

    2015-05-28

    Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations at the Yuma Sector Border Patrol Area in Yuma, Arizona. The retrofit was documented to better understand LED technology performance in high-temperature environments. This document is a summary brief of the Phase 1.0 and 1.1 reports previously published on this demonstration.

  15. Entropy, recycling and macroeconomics of water resources

    NASA Astrophysics Data System (ADS)

    Karakatsanis, Georgios; Mamassis, Nikos; Koutsoyiannis, Demetris

    2014-05-01

    We propose a macroeconomic model for water quantity and quality supply multipliers derived by water recycling (Karakatsanis et al. 2013). Macroeconomic models that incorporate natural resource conservation have become increasingly important (European Commission et al. 2012). In addition, as an estimated 80% of globally used freshwater is not reused (United Nations 2012), under increasing population trends, water recycling becomes a solution of high priority. Recycling of water resources creates two major conservation effects: (1) conservation of water in reservoirs and aquifers and (2) conservation of ecosystem carrying capacity due to wastewater flux reduction. Statistical distribution properties of the recycling efficiencies -on both water quantity and quality- for each sector are of vital economic importance. Uncertainty and complexity of water reuse in sectors are statistically quantified by entropy. High entropy of recycling efficiency values signifies greater efficiency dispersion; which -in turn- may indicate the need for additional infrastructure for the statistical distribution's both shifting and concentration towards higher efficiencies that lead to higher supply multipliers. Keywords: Entropy, water recycling, water supply multipliers, conservation, recycling efficiencies, macroeconomics References 1. European Commission (EC), Food and Agriculture Organization (FAO), International Monetary Fund (IMF), Organization of Economic Cooperation and Development (OECD), United Nations (UN) and World Bank (2012), System of Environmental and Economic Accounting (SEEA) Central Framework (White cover publication), United Nations Statistics Division 2. Karakatsanis, G., N. Mamassis, D. Koutsoyiannis and A. Efstratiades (2013), Entropy and reliability of water use via a statistical approach of scarcity, 5th EGU Leonardo Conference - Hydrofractals 2013 - STAHY '13, Kos Island, Greece, European Geosciences Union, International Association of Hydrological Sciences

  16. Energy implications of recycling packaging materials

    SciTech Connect

    Gaines, L.L.; Stodolsky, F.

    1994-03-01

    In 1992, Congress sought to rewrite the United States comprehensive solid waste legislation -- the Resource Conservation and Recovery Act (RCRA). Commodity-specific recycling rates were proposed for consumer-goods packaging materials and newsprint We compare the impacts on energy, materials use, and landfill volume of recycling at those rates to the impacts for alternative methods of material disposition to determine the optimum for each material. After products have served their intended uses, there are several alternative paths for material disposition. These include reuse, recycling to the same product, recycling to a lower-valued product, combustion for energy recovery, incineration without energy recovery, and landfill. Only options considered to be environmentally sound are Included. Both houses of Congress specifically excluded combustion for energy recovery from counting towards the recovery goats, probably because combustion is viewed as a form of disposal and is therefore assumed to waste resources and have n environmental effects. However, co-combustion in coal-fired plants or combustion in appropriately pollution-controlled waste-to-energy plants Is safe, avoids landfill costs, and can displace fossil fuels. In some cases, more fossil fuels can be displaced by combustion than by recycling. We compare the alternative life-cycle energies to the energies for producing the products from virgin materials. Results depend on the material and on the objective to be achieved. There are trade-offs among possible goals. For instance, paper packaging recycling conserves trees but may require greater fossil-fuel input than virgin production. Therefore, the objectives for proposed legislation must be examined to see whether they can most effectively be achieved by mandated recycling rates or by other methods of disposition. The optimal choices for the United States may not necessarily be the same as those for Europe and other parts of the world.

  17. "Missing Mass" Found in Recycled Dwarf Galaxies

    NASA Astrophysics Data System (ADS)

    2007-05-01

    Astronomers studying dwarf galaxies formed from the debris of a collision of larger galaxies found the dwarfs much more massive than expected, and think the additional material is "missing mass" that theorists said should not be present in this kind of dwarf galaxy. Multiwavelength Image of NGC 5291 Multiwavelength image of NGC 5291 and dwarf galaxies around it. CREDIT: P-A Duc, CEA-CNRS/NRAO/AUI/NSF/NASA. Click on image for page of more graphics and full information The scientists used the National Science Foundation's Very Large Array (VLA) radio telescope to study a galaxy called NGC 5291, 200 million light-years from Earth. This galaxy collided with another 360 million years ago, and the collision shot streams of gas and stars outward. Later, the dwarf galaxies formed from the ejected debris. "Our detailed studies of three 'recycled' dwarf galaxies in this system showed that the dwarfs have twice as much unseen matter as visible matter. This was surprising, because they were expected to have very little unseen matter," said Frederic Bournaud, of the French astrophysics laboratory AIM of the French CEA and CNRS. Bournaud and his colleagues announced their discovery in the May 10 online issue of the journal Science. "Dark matter," which astronomers can detect only by its gravitational effects, comes, they believe, in two basic forms. One form is the familiar kind of matter seen in stars, planets, and humans -- called baryonic matter -- that does not emit much light or other type of radiation. The other form, called non-baryonic dark matter, comprises nearly a third of the Universe but its nature is unknown. The visible portion of spiral galaxies, like our own Milky Way, lies mostly in a flattened disk, usually with a bulge in the center. This visible portion, however, is surrounded by a much larger halo of dark matter. When spiral galaxies collide, the material expelled outward by the interaction comes from the galaxies' disks. For this reason, astronomers did

  18. Distinguishing Potential Recyclers from Nonrecyclers: A Basis for Developing Recycling Strategies.

    ERIC Educational Resources Information Center

    Lansana, Florence M.

    1992-01-01

    Examines the characteristics of recycling behavior for aid in strategy development to stimulate participation in community recycling programs. Suggests strategies that focus on the specific needs and problems of participating households, accommodate community variations, use appropriate information channels, and consider the relevance of operation…

  19. Cell phone recycling experiences in the United States and potential recycling options in Brazil.

    PubMed

    Silveira, Geraldo T R; Chang, Shoou-Yuh

    2010-11-01

    This paper presents an overview of cell phone recycling programs currently available in the United States. At the same time, it also provides analyses of the current recycling situation and possible recycling alternatives for Brazil. Although there are several recycling options in the United States, collection rates are still only 10% of all potential devices because customers are not aware of these possibilities. The whole system is financially based on reselling refurbished cell phones and recycled materials to developing countries which represent an effective and strong market. Several recyclers offer funds to collection partners who are either charities or who work with charities while obtaining the materials that they need in order to run their operations. A mobile phone recycling system for Brazil considering the United States experience and the Extended Producer Responsibility (EPR) principle is suggested. A deposit/refund/advance-recycling fee is proposed which might be implemented as a voluntary industrial initiative managed by PRO Brazil, a producer responsibility organization. One widespread public-private agreement will integrate all mobile phone stakeholders, and environmental education actions and promotional events will promote citizen's participation. PMID:20554440

  20. The fast-recycling receptor Megalin defines the apical recycling pathway of epithelial cells

    PubMed Central

    Perez Bay, Andres E.; Schreiner, Ryan; Benedicto, Ignacio; Paz Marzolo, Maria; Banfelder, Jason; Weinstein, Alan M.; Rodriguez-Boulan, Enrique J.

    2016-01-01

    The basolateral recycling and transcytotic pathways of epithelial cells were previously defined using markers such as transferrin (TfR) and polymeric IgA (pIgR) receptors. In contrast, our knowledge of the apical recycling pathway remains fragmentary. Here we utilize quantitative live-imaging and mathematical modelling to outline the recycling pathway of Megalin (LRP-2), an apical receptor with key developmental and renal functions, in MDCK cells. We show that, like TfR, Megalin is a long-lived and fast-recycling receptor. Megalin enters polarized MDCK cells through segregated apical sorting endosomes and subsequently intersects the TfR and pIgR pathways at a perinuclear Rab11-negative compartment termed common recycling endosomes (CRE). Whereas TfR recycles to the basolateral membrane from CRE, Megalin, like pIgR, traffics to subapical Rab11-positive apical recycling endosomes (ARE) and reaches the apical membrane in a microtubule- and Rab11-dependent manner. Hence, Megalin defines the apical recycling pathway of epithelia, with CRE as its apical sorting station. PMID:27180806

  1. The fast-recycling receptor Megalin defines the apical recycling pathway of epithelial cells.

    PubMed

    Perez Bay, Andres E; Schreiner, Ryan; Benedicto, Ignacio; Paz Marzolo, Maria; Banfelder, Jason; Weinstein, Alan M; Rodriguez-Boulan, Enrique J

    2016-01-01

    The basolateral recycling and transcytotic pathways of epithelial cells were previously defined using markers such as transferrin (TfR) and polymeric IgA (pIgR) receptors. In contrast, our knowledge of the apical recycling pathway remains fragmentary. Here we utilize quantitative live-imaging and mathematical modelling to outline the recycling pathway of Megalin (LRP-2), an apical receptor with key developmental and renal functions, in MDCK cells. We show that, like TfR, Megalin is a long-lived and fast-recycling receptor. Megalin enters polarized MDCK cells through segregated apical sorting endosomes and subsequently intersects the TfR and pIgR pathways at a perinuclear Rab11-negative compartment termed common recycling endosomes (CRE). Whereas TfR recycles to the basolateral membrane from CRE, Megalin, like pIgR, traffics to subapical Rab11-positive apical recycling endosomes (ARE) and reaches the apical membrane in a microtubule- and Rab11-dependent manner. Hence, Megalin defines the apical recycling pathway of epithelia, with CRE as its apical sorting station. PMID:27180806

  2. A soft kinetic data structure for lesion border detection

    PubMed Central

    Kockara, Sinan; Mete, Mutlu; Yip, Vincent; Lee, Brendan; Aydin, Kemal

    2010-01-01

    Motivation: The medical imaging and image processing techniques, ranging from microscopic to macroscopic, has become one of the main components of diagnostic procedures to assist dermatologists in their medical decision-making processes. Computer-aided segmentation and border detection on dermoscopic images is one of the core components of diagnostic procedures and therapeutic interventions for skin cancer. Automated assessment tools for dermoscopic images have become an important research field mainly because of inter- and intra-observer variations in human interpretations. In this study, a novel approach—graph spanner—for automatic border detection in dermoscopic images is proposed. In this approach, a proximity graph representation of dermoscopic images in order to detect regions and borders in skin lesion is presented. Results: Graph spanner approach is examined on a set of 100 dermoscopic images whose manually drawn borders by a dermatologist are used as the ground truth. Error rates, false positives and false negatives along with true positives and true negatives are quantified by digitally comparing results with manually determined borders from a dermatologist. The results show that the highest precision and recall rates obtained to determine lesion boundaries are 100%. However, accuracy of assessment averages out at 97.72% and borders errors' mean is 2.28% for whole dataset. Contact: skockara@uca.edu PMID:20529909

  3. Mutations in exocyst complex subunit SEC6 gene impaired polar auxin transport and PIN protein recycling in Arabidopsis primary root.

    PubMed

    Tan, Xiaoyun; Feng, Yihong; Liu, Yulong; Bao, Yiqun

    2016-09-01

    Polar auxin transport, which is critical for land plant pattern formation and directional growth, is largely depended on asymmetric distribution of PIN proteins at the plasma membrane (PM). Endocytosis and recycling processes play important roles in regulating PIN protein distribution and abundance at the PM. Two subunits (SEC8, EXO70A1) of exocyst, an octameric vesicle-tethering complex, have been reported to be involved in PIN protein recycling in Arabidopsis. However, the function of exocyst complex in PIN protein recycling and polar auxin transport remains incompletely understood. In this study, we utilized two SEC6 down-regulation mutants (PRsec6-1 and PRsec6-2) to investigate the role of exocyst subunit SEC6 in the primary root development, polar auxin transport and PIN proteins recycling. We found that in PRsec6 mutants: 1. Primary root growth was retarded, and lateral root initiation were compromised. 2. Primary roots were sensitive to exogenous auxin 1-napthalene acetic acid (NAA) but not 2,4-dichlorophenoxy (2.4-D). 3. Recycling of PIN1 and PIN2 proteins from the Brefeldin A (BFA) compartment to the PM was delayed. 4. Vesicles accumulated in the primary root tip cells, especially accumulated in the cytosol closed to the PM. These results further demonstrated that the exocyst complex plays an important role in PIN protein recycling and polar auxin transport in Arabidopsis primary root. PMID:27457987

  4. Strictly homogeneous laterally complete modules

    NASA Astrophysics Data System (ADS)

    Chilin, V. I.; Karimov, J. A.

    2016-03-01

    Let A be a laterally complete commutative regular algebra and X be a laterally complete A-module. In this paper we introduce a notion of homogeneous and strictly homogeneous A-modules. It is proved that any homogeneous A-module is strictly homogeneous A-module, if the Boolean algebra of all idempotents in A is multi-σ-finite.

  5. Progress in recycling of automobile shredder residue

    SciTech Connect

    Jody, B.J.; Daniels, E.J.; Pomykala, J.A. Jr.

    1996-03-01

    At Argonne National Laboratory, we have been developing a potentially economical process to recycle automobile shredder residue (ASR). We identified three potentially marketable materials that can be recovered from ASR and developed technologies to recover and upgrade these materials. We build and tested a field-demonstration plant for recycling polyurethane foam and produced about 2000 lb of recycled foam. Several 300-lb samples were sent for evaluation and were found to be of marketable quality. We are also preparing for a large-scale test in which about 200 tons of ASR-derived fines will be used as a raw material in cement making. A major cement company has evaluated small samples of fines prepared in the laboratory and found that they meet its requirements as a substitute for iron ore or mill scale. We also produced about 50 lb of recycled acrylonitrile butadiene styrene (ABS) from obsolete automobiles and found that it has properties that could be readily upgraded to meet the specifications of the automotive industry. In this paper, we briefly discuss the process as a whole and summarize the results obtained from the field work on foam and fines recycling.

  6. Recycling of electric-arc-furnace dust

    SciTech Connect

    Sresty, G.C.

    1990-05-01

    Electric arc furnace (EAF) dust is one of the largest solid waste streams produced by steel mills, and is classified as a waste under the Resource Conservation and Recovery Act (RCRA) by the U.S. Environmental Protection Agency (EPA). Successful recycle of the valuable metals (iron, zinc, and lead) present in the dust will result in resource conservation while simultaneously reducing the disposal problems. Technical feasibility of a novel recycling method based on using hydrogen as the reductant was established under this project through laboratory experiments. Sponge iron produced was low in zinc, cadmium, and lead to permit its recycle, and nontoxic to permit its safe disposal as an alternative to recycling. Zinc oxide was analyzed to contain 50% to 58% zinc by weight, and can be marketed for recovering zinc and lead. A prototype system was designed to process 2.5 tons per day (600 tons/year) of EAF dust, and a preliminary economic analysis was conducted. The cost of processing dust by this recycling method was estimated to be comparable to or lower than existing methods, even at such low capacities.

  7. Recycler lattice for Project X at Fermilab

    SciTech Connect

    Xiao, Meiqin; Johnson, David E.; /Fermilab

    2009-09-01

    Project X is an intense proton source that provides beam for various physics programs. The source consists of an 8 GeV H- superconducting linac that injects into the Fermilab Recycler where H- are converted to protons. Protons are provided to the Main Injector and accelerated to desired energy (in the range 60-120 GeV) or extracted from the Recycler for the 8 GeV program. A long drift space is needed to accommodate the injection chicane with stripping foils. The Recycler is a fixed 8 GeV kinetic energy storage ring using permanent gradient magnets. A phase trombone straight section is used to control the tunes. In this paper, the existing FODO lattice in RR10 straight section being converted into doublet will be described. Due to this change, the phase trombone straight section has to be modified to bring the tunes to the nominal working point. A toy lattice of recycler ring is designed to simulate the end-shim effects of each permanent gradient magnet to add the flexibility to handle the tune shift to the lattice during the operation of 1.6E14 with KV distribution of the proton beam to give {approx}0.05 of space charge tune shift. The comparison or the combinations of the two modification ways for the Recycler ring lattice will be presented also in this paper.

  8. Energy implications of glass-container recycling

    SciTech Connect

    Gaines, L L; Mintz, M M

    1994-03-01

    This report addresses the question of whether glass-container recycling actually saves energy. Glass-container production in 1991 was 10{sup 7} tons, with cullet making up about 30% of the input to manufacture. Two-thirds of the cullet is postconsumer waste; the remainder is in-house scrap (rejects). Most of the glass recycled is made into new containers. Total primary energy consumption includes direct process-energy use by the industry (adjusted to account for the efficiency of fuel production) plus fuel and raw-material transportation and production energies; the grand total for 1991 is estimated to be about 168 {times} 10{sup 12} Btu. The total primary energy use decreases as the percent of glass recycled rises, but the maximum energy saved is only about 13%. If distance to the landfill is kept fixed and that to the recovery facility multiplied by about eight, to 100 mi, a break-even point is reached, and recycling saves no energy. Previous work has shown that to save energy when using glass bottles, reuse is the clear choice. Recycling of glass does not save much energy or valuable raw material and does not reduce air or water pollution significantly. The most important impacts are the small reduction of waste sent to the landfill and increased production rates at glass plants.

  9. INEL metal recycle annual report, FY-94

    SciTech Connect

    Bechtold, T.E.

    1994-09-01

    In 1992, the mission of the Idaho Chemical Processing Plant was changed from reprocessing of spent nuclear fuels to development of technologies for conditioning of spent nuclear fuels and other high-level wastes for disposal in a geologic repository. In addition, the Department of Energy (DOE) directed Idaho National Engineering Laboratory (INEL) to develop a program plan addressing the management of radioactive contaminated scrap metal (RSM) within the DOE complex. Based on discussions with the EM-30 organization, the INEL Metal Recycle program plan was developed to address all issues of RSM management. Major options considered for RSM management were engineered interim storage, land disposal as low-level waste, and beneficial reuse/recycle. From its inception, the Metal Recycle program has emphasized avoidance of storage and disposal costs through beneficial reuse of RSM. The Metal Recycle program plan includes three major activities: Site-by-site inventory of RSM resources; validation of technologies for conversion of RSM to usable products; and identification of parties prepared to participate in development of a RSM recycle business.

  10. Food security in a world without borders.

    PubMed

    de Haen, Hartwig; Thompson, Brian

    2003-01-01

    is through community nutrition programmes that encourage the full participation and co-operation of the entire community, maximise the utilisation of local resources, grasp the benefits of new technologies for productivity gains, involve multiple sectors and engage strong political commitment. The international community will be judged by its treatment of its most vulnerable members. The international community has repeatedly declared that it is dedicated to the eradication of poverty. Eliminating hunger and malnutrition is a vital first step. The political will to fight hunger and a firm commitment to invest in agriculture' and rural development are critical elements in any effort to achieve sustainable alleviation of hunger and poverty. This meeting and the WFS:FYL provide the additional impetus to meet the challenge of achieving food and nutritional security in a world without borders and free from hunger and malnutrition. PMID:15806943

  11. 76 FR 71994 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-21

    ... SECURITY U.S. Customs and Border Protection Advisory Committee on Commercial Operations of Customs and Border Protection (COAC) AGENCY: U.S. Customs and Border Protection, Department of Homeland Security (DHS... Committee on Commercial Operations of Customs and Border Protection (COAC) will meet on December 7, 2011,...

  12. 77 FR 68802 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-16

    ... SECURITY U.S. Customs and Border Protection Advisory Committee on Commercial Operations of Customs and Border Protection (COAC) AGENCY: U.S. Customs and Border Protection, Department of Homeland Security (DHS... Committee on Commercial Operations of Customs and Border Protection (COAC) will meet on December 4, 2012,...

  13. 78 FR 11671 - Advisory Committee on Commercial Operations of Customs and Border Protection (COAC)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... SECURITY U.S. Customs and Border Protection Advisory Committee on Commercial Operations of Customs and Border Protection (COAC) AGENCY: U.S. Customs and Border Protection, Department of Homeland Security (DHS... Committee on Commercial Operations of Customs and Border Protection (COAC) will meet on March 6, 2013,...

  14. U.S. border patrol potential applications of internetted unattended ground sensors

    NASA Astrophysics Data System (ADS)

    Eaton, Wilbur W., Jr.; Schatzmann, Larry A.

    1997-07-01

    The U.S. Border Patrol monitors the traffic on the Mexican/U.S. Border, the Canadian/U.S. Border and along some coastal areas. Measures have been taken to reduce or eliminate illegal immigration and smuggling. An automated border surveillance sub-system based on the DARPA Internetted Unattended Ground Sensors Program is discussed.

  15. 78 FR 73875 - Agency Information Collection Activities: Canadian Border Boat Landing Permit (CBP Form I-68)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Canadian Border Boat Landing Permit (CBP Form I-68) AGENCY: U.S. Customs and Border Protection (CBP), Department of Homeland... requirement concerning the Canadian Border Boat Landing Permit (Form I-68). This request for comment is...

  16. 75 FR 61508 - Agency Information Collection Activities: Canadian Border Boat Landing Permit (CBP Form I-68)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-05

    ... SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Canadian Border Boat Landing Permit (CBP Form I-68) AGENCY: U.S. Customs and Border Protection (CBP), Department of Homeland... concerning the Canadian Border Boat Landing Permit (Form I- ] 68). This request for comment is being...

  17. Unmanned Aerial Systems in the Process of Juridical Verification of Cadastral Border

    NASA Astrophysics Data System (ADS)

    Rijsdijk, M.; van Hinsbergh, W. H. M.; Witteveen, W.; ten Buuren, G. H. M.; Schakelaar, G. A.; Poppinga, G.; van Persie, M.; Ladiges, R.

    2013-08-01

    Quite often in the verification of cadastral borders, owners of the parcels involved are not able to make their attendance at the appointed moment in time. New appointments have to be made in order to complete the verification process, and as a result often costs and throughput times grow beyond what is considered to be acceptable. To improve the efficiency of the verification process an experiment was set up that refrains from the conventional terrestrial methods for border verification. The central research question was formulated as "How useful are Unmanned Aerial Systems in the juridical verification process of cadastral borders of ownership at het Kadaster in the Netherlands?". For the experiment, operational evaluations were executed at two different locations. The first operational evaluation took place at the Pyramid of Austerlitz, a flat area with a 30 m high pyramid built by troops of Napoleon, with low civilian attendance. Two subsequent evaluations were situated in a small neighbourhood in the city of Nunspeet, where the cadastral situation recently changed, resulting from twenty new houses that were build. Initially a mini-UAS of the KLPD was used to collect photo datasets with less than 1 cm spatial resolution. In a later stage the commercial service provider Orbit Gis was hired. During the experiment four different software packages were used for processing the photo datasets into accurate geo-referenced ortho-mosaics. In this article more details will be described on the experiments carried out. Attention will be paid to the mini-UAS platforms (AscTec Falcon 8, Microdrone MD-4), the cameras used, the photo collection plan, the usage of ground control markers and the calibration of the camera's. Furthermore the results and experiences of the different used SFM software packages (Visual SFM/Bundler, PhotoScan, PhotoModeler and the Orbit software) will be shared.

  18. Police Victimization Among Persons Who Inject Drugs Along the U.S.–Mexico Border

    PubMed Central

    Pinedo, Miguel; Burgos, José Luis; Zúñiga, María Luisa; Perez, Ramona; Macera, Caroline A.; Ojeda, Victoria D.

    2015-01-01

    Objective: Problematic policing practices are an important driver of HIV infection among persons who inject drugs (PWID) in the U.S.–Mexico border region. This study identifies factors associated with recent (i.e., past 6 months) police victimization (e.g., extortion, physical and sexual violence) in the border city of Tijuana, Mexico. Method: From 2011 to 2013, 733 PWID (62% male) were recruited in Tijuana and completed a structured questionnaire. Eligible participants were age 18 years or older, injected illicit drugs within the past month, and spoke Spanish or English. Multivariable logistic regression analyses identified correlates of recent experiences of police victimization (e.g., bribes, unlawful confiscation, physical and sexual violence). Results: Overall, 56% of PWID reported a recent police victimization experience in Tijuana. In multivariable logistic regression analyses, factors independently associated with recent police victimization included recent injection of methamphetamine (adjusted odds ratio [AOR] = 1.62; 95% CI [1.18, 2.21]) and recently received injection assistance by a “hit doctor” (AOR = 1.56; 95% CI [1.03, 2.36]). Increased years lived in Tijuana (AOR = 0.98 per year; 95% CI [0.97, 0.99]) and initiating drug use at a later age (AOR = 0.96 per year; 95% CI [0.92, 0.99]) were inversely associated with recent police victimization. Conclusions: Physical drugusing markers may increase PWID susceptibility to police targeting and contribute to experiences of victimization. Interventions aimed at reducing police victimization events in the U.S.–Mexico border region should consider PWID’s drug-using behaviors. Reducing problematic policing practices may be a crucial public health strategy to reduce HIV risk among PWID in this region. PMID:26402356

  19. Antimony recycling in the United States in 2000

    USGS Publications Warehouse

    Carlin, James F.

    2006-01-01

    The importance of recycling has become more obvious as concerns about the environment and import dependence have grown in recent years. When materials are recycled, fewer natural resources are consumed, and less waste products go to landfills or pollute the water and air. This study, one of a series of reports on metals recycling in 2000, discusses the flow of antimony from mining through its uses and disposal with emphasis on recycling. In 2000, the recycling efficiency for antimony was estimated to be 89 percent, and the recycling rate was about 20 percent.

  20. Recycling of used aluminum beverage cans in Japan

    SciTech Connect

    Itou, Tatsuo

    1995-12-31

    Both sales volume of aluminum cans and the recycling rate are remarkably increasing in Japan. In 1993, recycled can volume was 11.78 billion cans (116,258 metric tons) and its recycling rate 57.8 percent. Mitsubishi Materials Corporation, the leading manufacturer of aluminum cans in Japan, and their affiliated companies are very deeply involved in recycling used beverage cans (U.B.C) and recycling them back to can stock. In this paper, the author presents the following: (1) recent trends of beverage can consumption in Japan; (2) trend of aluminum cans and recycling rate in Japan; and (3) future of the aluminum can business in Japan.

  1. Layered mode selection logic control for border security

    NASA Astrophysics Data System (ADS)

    Born, T.; Ferrer, G.; Wright, A. M.; Wright, A. B.

    2007-04-01

    Challenges in border security may be resolved through a team of autonomous mobile robots configured as a flexible sensor array. The robots will have a prearranged formation along a section of a border, and each robot will attempt to maintain a uniform distance with its nearest neighbors. The robots will carry sensor packages which can detect a signature that is representative of a human (for instance, a thermal signature). When a robot detects an intruder, it will move away such that it attempts to maintain a constant distance from the intruder and move away from the border (i.e. into its home territory). As the robot moves away from the border, its neighbors will move away from the border to maintain a uniform distance with the moving robot and with their fixed neighbors. The pattern of motion in the team of robots can be identified, either algorithmically by a computer or by a human monitor of a display. Unique patterns are indicative of animal movement, human movement, and mass human movement. To realize such a scheme, a new control architecture must be developed. This architecture must be fault tolerant to sensor and manipulator failures, scalable in number of agents, and adaptable to different robotic base platforms (for instance, a UGV may be appropriate at the southern border and a UAV may be appropriate at the northern border). The Central Arkansas Robotics Consortium has developed an architecture, called Layered Mode Selection Logic (LMSL), which addresses all of these concerns. The overall LMSL scheme as applied to a multi-agent flexible sensor array is described in this paper.

  2. New developments in RTR fuel recycling

    SciTech Connect

    Lelievre, F.; Brueziere, J.; Domingo, X.; Valery, J.F.; Leroy, J.F.; Tribout-Maurizi, A.

    2013-07-01

    As most utilities in the world, Research and Test Reactors (RTR) operators are currently facing two challenges regarding the fuel, in order to comply with local safety and waste management requirements as well as global non-proliferation obligation: - How to manage used fuel today, and - How fuel design changes that are currently under development will influence used fuel management. AREVA-La-Hague plant has a large experience in used fuel recycling, including traditional RTR fuel (UAl). Based on that experience and deep knowledge of RTR fuel manufacturing, AREVA is currently examining possible options to cope with both challenges. This paper describes the current experience of AREVA-La-Hague in UAl used fuels recycling and its plan to propose recycling for various types of fuels such as U{sub 3}Si{sub 2} fuel or UMo fuel on an industrial scale. (authors)

  3. Characterization of DWPF recycle condensate materials

    SciTech Connect

    Bannochie, C. J.; Adamson, D. J.; King, W. D.

    2015-04-01

    A Defense Waste Processing Facility (DWPF) Recycle Condensate Tank (RCT) sample was delivered to the Savannah River National Laboratory (SRNL) for characterization with particular interest in the concentration of I-129, U-233, U-235, total U, and total Pu. Since a portion of Salt Batch 8 will contain DWPF recycle materials, the concentration of I-129 is important to understand for salt batch planning purposes. The chemical and physical characterizations are also needed as input to the interpretation of future work aimed at determining the propensity of the RCT material to foam, and methods to remediate any foaming potential. According to DWPF the Tank Farm 2H evaporator has experienced foaming while processing DWPF recycle materials. The characterization work on the RCT samples has been completed and is reported here.

  4. Scrap uranium recycling via electron beam melting

    SciTech Connect

    McKoon, R.

    1993-11-01

    A program is underway at the Lawrence Livermore National Laboratory (LLNL) to recycle scrap uranium metal. Currently, much of the material from forging and machining processes is considered radioactive waste and is disposed of by oxidation and encapsulation at significant cost. In the recycling process, uranium and uranium alloys in various forms will be processed by electron beam melting and continuously cast into ingots meeting applicable specifications for virgin material. Existing vacuum processing facilities at LLNL are in compliance with all current federal and state environmental, safety and health regulations for the electron beam melting and vaporization of uranium metal. One of these facilities has been retrofitted with an auxiliary electron beam gun system, water-cooled hearth, crucible and ingot puller to create an electron beam melt furnace. In this furnace, basic process R&D on uranium recycling will be performed with the goal of eventual transfer of this technology to a production facility.

  5. Recycling and reuse: Are they the answer

    SciTech Connect

    Not Available

    1994-11-01

    At a time when reuse is widely recognized as a partial solution to the US mounting waste problem, it comes as no surprise that drinking water suppliers are giving thought to reclaiming residuals. This reuse may occur within the treatment plant, for example, by recovering alum from sludge or recycling waste streams, or outside the plant, where endeavors such as controlled land application return components of sludge to the soil. By nature, sludges and other residuals likely contain contaminants that have been removed from the water--e.g., Giardia and Cryptosporidium, trihalomethane precursors, and heavy metals. Recycling waste flows has the potential to disturb the treatment process or to affect the quality of finished water. Proper treatment and monitoring of waste streams can render them acceptable for recycling.

  6. Impacts of EV battery production and recycling

    SciTech Connect

    Gaines, L.; Singh, M.

    1996-06-01

    Electric vehicles batteries use energy and produce environmental residuals when they are produced and recycled. This study estimates, for four selected battery types (sodium-sulfur, nickel-metal hydride, nickel-cadmium, and advanced lead-acid), the impacts of production and recycling of the materials used in electric vehicle batteries. These impacts are compared, with special attention to the locations of the emissions. It is found that the choice among batteries for electric vehicles involves tradeoffs among impacts. Nickel-cadmium and nickel-metal hydride batteries are similar, for example, but energy requirements for the production of cadmium electrodes may be higher than those for metal hydride electrodes, while the latter may be more difficult to recycle.

  7. Plastics disassembly versus bulk recycling: engineering design for end-of-life electronics resource recovery.

    PubMed

    Rios, Pedro; Stuart, Julie Ann; Grant, Ed

    2003-12-01

    Annual plastic flows through the business and consumer electronics manufacturing supply chain include nearly 3 billion lb of high-value engineering plastics derived from petroleum. The recovery of resource value from this stream presents critical challenges in areas of materials identification and recycling process design that demand new green engineering technologies applied together with life cycle assessment and ecological supply chain analysis to create viable plastics-to-plastics supply cycles. The sustainable recovery of potentially high-value engineering plastics streams requires that recyclers either avoid mixing plastic parts or purify later by separating smaller plastic pieces created in volume reduction (shredding) steps. Identification and separation constitute significant barriers in the plastics-to-plastics recycling value proposition. In the present work, we develop a model that accepts randomly arriving electronic products to study scenarios by which a recycler might identify and separate high-value engineering plastics as well as metals. Using discrete eventsimulation,we compare current mixed plastics recovery with spectrochemical plastic resin identification and subsequent sorting. Our results show that limited disassembly with whole-part identification can produce substantial yields in separated streams of recovered engineering thermoplastics. We find that disassembly with identification does not constitute a bottleneck, but rather, with relatively few workers, can be configured to pull the process and thus decrease maximum staging space requirements. PMID:14700333

  8. Marine shale and the Hazwaste recycling debate

    SciTech Connect

    Bishop, J.

    1988-10-01

    This paper reports that Marine Shale Processors, Inc. (St. Rose, La.), and the Hazardous Waste Treatment Council (Washington, D.C.), an industry trade association, are at the focus of a controversy whose resolution has significant implications for the respective definitions, concepts and legal statuses of hazardous-waste incineration and recycling. Marine Shale Processors (MSP) claims it recycles hazardous wastes from a variety of government and commercial sources by blending it and treating it thermally in a large rotary kiln to produce non-hazardous aggregate material, which is sold for construction, road-building or other purposes. The Hazardous Waste Treatment Council (HWTC) and others allege that, under the provisions of the Resource Conservation and Recovery Act (RCRA), MSP is operating an unpermitted hazardous-waste incinerator. According to HWTC officials, MSP's identification as a recycler is inappropriate and has allowed the company unfairly to avoid permitting costs and formal compliance with RCRA standards and regulations. Recently, the Louisiana legislature passed laws declaring that hazardous-waste recyclers in the state must meet the same standards as permitted hazardous-waste incinerators. At press time, a hearing before the Louisiana Department of Environmental Quality to determine MSP's status as a recycler under the new laws was set for Sept. 29. Since all parties in the debate over Marine Shale's industry role appear to agree that the controversy is central to the emerging issue of establishing clear distinctions between recycling and hazardous-waste destruction, this article describes the arguments on both sides as these stood in mid-September.

  9. Chemical and mechanical recycling of shredder fluff

    SciTech Connect

    Jody, B.J.; Daniels, E.J.; Bonsignore, P.V.; Shoemaker, E.L.

    1992-12-01

    Each year, the secondary metals industry recovers about 55--60 million tons of prompt and obsolete scrap which is used in the production of finished steel products. The single largest source of this scrap is the obsolete automobile. The shredder industry recovers about 10--12 million ton/yr of ferrous scrap, most of which is from shredded automobiles. However, for each ton of steel recovered, over 500 lb of fluff are produced. Shredder fluff is comprised of the nonmetallic content of the automobile and other shredded materials, such as refrigerators, dryers, and dishwashers, which are commonly called white goods. The plastics content of shredder fluff is typically about 15--20% by weight and is expected to increase over the next decade due to the significant increase in the use of automotive plastics over the past 10--15 years. At present, shredder fluff is landfilled. The rapidly escalating landfilling cost, along with environmental concerns over the fate of this waste, poses a significant cost and liability to the shredder industry. Research is being carried out to identify and develop recycling technologies that will reduce the volume and the mass of shredder fluff going to landfills and to minimize its cost impact on the recycling of secondary metals. Previous research has focused on exploiting the plastics content of shredder fluff and other hydrocarbons present in fluff for secondary recycling (e.g., production of wood-products substitutes) and for quaternary recycling (e.g., energy generation). Limited work was also conducted on tertiary recycling (e.g., pyrolysis and gasification). Although the previous research has established the technical feasibility of most, if not all, of the alternatives that were examined, none have proven to be cost-effective. This paper describes some research at Argonne National Laboratory (ANL) to develop a process to recycle some of the fluff content, primarily the thermoplastics.

  10. Chemical and mechanical recycling of shredder fluff

    SciTech Connect

    Jody, B.J.; Daniels, E.J.; Bonsignore, P.V.; Shoemaker, E.L.

    1992-01-01

    Each year, the secondary metals industry recovers about 55--60 million tons of prompt and obsolete scrap which is used in the production of finished steel products. The single largest source of this scrap is the obsolete automobile. The shredder industry recovers about 10--12 million ton/yr of ferrous scrap, most of which is from shredded automobiles. However, for each ton of steel recovered, over 500 lb of fluff are produced. Shredder fluff is comprised of the nonmetallic content of the automobile and other shredded materials, such as refrigerators, dryers, and dishwashers, which are commonly called white goods. The plastics content of shredder fluff is typically about 15--20% by weight and is expected to increase over the next decade due to the significant increase in the use of automotive plastics over the past 10--15 years. At present, shredder fluff is landfilled. The rapidly escalating landfilling cost, along with environmental concerns over the fate of this waste, poses a significant cost and liability to the shredder industry. Research is being carried out to identify and develop recycling technologies that will reduce the volume and the mass of shredder fluff going to landfills and to minimize its cost impact on the recycling of secondary metals. Previous research has focused on exploiting the plastics content of shredder fluff and other hydrocarbons present in fluff for secondary recycling (e.g., production of wood-products substitutes) and for quaternary recycling (e.g., energy generation). Limited work was also conducted on tertiary recycling (e.g., pyrolysis and gasification). Although the previous research has established the technical feasibility of most, if not all, of the alternatives that were examined, none have proven to be cost-effective. This paper describes some research at Argonne National Laboratory (ANL) to develop a process to recycle some of the fluff content, primarily the thermoplastics.

  11. Household demand for waste recycling services.

    PubMed

    Palatnik, Ruslana; Ayalon, Ofira; Shechter, Mordechai

    2005-02-01

    Municipalities everywhere are coping with increasing amounts of solid waste and need urgently to formulate efficient and sustainable solutions to the problem. This study examines the use of economic incentives in municipal waste management. Specifically, we address the issue of recycling, if and when this waste management option is-on social welfare grounds-a preferred solution.A number of studies have recently assessed the monetary value of the externalities of alternative solid waste management options. In the present context, these subsidies could be interpreted as the implicit value of the benefits from reducing environmental externalities associated with landfilling as perceived by local government authorities. We surmise that the difference between mean households' willingness to pay (WTP) for recycling services, via the purchase of a subsidized waste disposal facility, and the above (proxy) value of externalities reflects the difference between private and public perception regarding the negative externality associated with landfilling. We believe that this information is useful in determining the level of subsidization needed (if at all) to sustain any recycling program.The study is unique in the sense that its conclusions are based on revealed household behavior when faced with increased disposal costs, as well as information on WTP responses in hypothetical but related (and, therefore, familiar) scenarios. The article also explores the influence of the subsidization schemes on recycling rates. It was found that with low levels of effort needed to participate in a curbside recycling program, households' participation rates are mainly influenced by economic variables and age, and households are willing to pay a higher price for the recycling scheme. When the required effort level is relatively high, however, households would pay a lower price, and the rate is influenced mainly by their environmental commitment and by economic considerations. We found that

  12. Economic analysis of recycling contaminated concrete

    SciTech Connect

    Stephen, A.; Ayers, K.W.; Boren, J.K.; Parker, F.L.

    1997-02-01

    Decontamination and Decommissioning activities in the DOE complex generate large volumes of radioactively contaminated and uncontaminated concrete. Currently, this concrete is usually decontaminated, the contaminated waste is disposed of in a LLW facility and the decontaminated concrete is placed in C&D landfills. A number of alternatives to this practice are available including recycling of the concrete. Cost estimates for six alternatives were developed using a spreadsheet model. The results of this analysis show that recycling alternatives are at least as economical as current practice.

  13. Methanation process utilizing split cold gas recycle

    DOEpatents

    Tajbl, Daniel G.; Lee, Bernard S.; Schora, Jr., Frank C.; Lam, Henry W.

    1976-07-06

    In the methanation of feed gas comprising carbon monoxide and hydrogen in multiple stages, the feed gas, cold recycle gas and hot product gas is mixed in such proportions that the mixture is at a temperature sufficiently high to avoid carbonyl formation and to initiate the reaction and, so that upon complete reaction of the carbon monoxide and hydrogen, an excessive adiabatic temperature will not be reached. Catalyst damage by high or low temperatures is thereby avoided with a process that utilizes extraordinarily low recycle ratios and a minimum of investment in operating costs.

  14. Self-protection in dry recycle technologies

    SciTech Connect

    Hannum, W.H.; Wade, D.; Stanford, G.

    1995-12-01

    In response to the INFCE conclusions, the U.S. undertook development of a new dry fuel cycle. Dry recycle processes have been demonstrated to be feasible. Safeguarding such fuel cycles will be dramatically simpler than the PUREX fuel cycle. At every step of the processes, the materials meet the {open_quotes}spent-fuel standard.{close_quotes} The scale is compatible with collocation of power reactors and their recycle facility, eliminating off-site transportation and storage of plutonium-bearing materials. Material diverted either covertly or overtly would be difficult (relative to material available by other means) to process into weapons feedstock.

  15. The value of recycling on water conservation.

    SciTech Connect

    Ludi-Herrera, Katlyn D.

    2013-07-01

    Sandia National Laboratories (SNL) is working to conserve water through recycling. This report will focus on the water conservation that has been accumulated through the recycling of paper, ceiling tiles, compost, and plastic. It will be discussed the use of water in the process of manufacturing these materials and the amount of water that is used. The way that water is conserved will be reviewed. From the stand point of SNL it will be discussed the amount of material that has been accumulated from 2010 to the first two quarters of 2013 and how much water this material has saved.

  16. Recycling Pulsars: spins, masses and ages

    NASA Astrophysics Data System (ADS)

    Tauris, T. M.; Kramer, M.; Langer, N.

    2013-03-01

    Although the first millisecond pulsars (MSPs) were discovered 30 years ago we still do not understand all details of their formation process. Here, we present new results from Tauris, Langer & Kramer (2012) on the recycling scenario leading to radio MSPs with helium or carbon-oxygen white dwarf companions via evolution of low- and intermediate mass X-ray binaries (LMXBs, IMXBs). We discuss the location of the spin-up line in the PṖ-diagram and estimate the amount of accreted mass needed to obtain a given spin period and compare with observations. Finally, we constrain the true ages of observed recycled pulsars via calculated isochrones in the PṖ-diagram.

  17. Recovering valuable metals from recycled photovoltaic modules.

    PubMed

    Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun

    2014-07-01

    Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future. PMID:25122953

  18. Impact of San Diego`s mandatory recycling ordinance on meeting the California 50% recycling goal

    SciTech Connect

    Anthony, R.V.; Worrell, W.A.

    1998-12-31

    When AB 939, The Integrated Waste Management Act of 1989, was chaptered into law, the Statewide recycling rate was 12%. The year 1990 was set as the base year. 1995 was a set as a target for the first 25% of the resources to be diverted. The year 2000 is the date for the 50% target. Today the Statewide average is around 30%. In San Diego, one reason landfill tonnage`s are down is that most of the cities have attained 40% diversions and beyond. The County Recycling Plan, initiated by then Supervisor Susan Golding in 1988, called for a 30% diversion of resources from County Landfills. One aspect of this plan was to use landfill fees to pay for trucks and bins. The County granted these to the cities and their contractors to begin the first residential and commercial recyclable materials` collections. The County put a ban on the burial of designated recyclables at County Landfills into effect in 1992. Wasted resources disposed at County Landfills dropped from 2.4 million tons in 1990 to 1.3 million tons in 1993, more than 45%. This program was recognized in 1990, by the California Department of Conservation, Division of Recycling as the best in the State, and by the National Recycling Coalition in 1993 as the best in the nation. The public sees recycling as a resource management issue. In some cities, the public has voted to pay for the opportunity to recycle discarded resources. The increased availability of these recovered materials has created thousands of new jobs and businesses. This is a hundred times more jobs than the number of jobs supported by the landfilling of these resources. These businesses have been started to provide the collection, processing, transportation, and remanufacturing of products related to the recovered metal, glass, fiber, plastic and organics. Most people who recycle think they can diminish the impact on the planet by putting back some of what they have used.

  19. Cerebral Laterality and Verbal Processes

    ERIC Educational Resources Information Center

    Sherman, Jay L.; And Others

    1976-01-01

    Research suggests that we process information by way of two distinct and functionally separate coding systems. Their location, somewhat dependent on cerebral laterality, varies in right- and left-handed persons. Tests this dual coding model. (Editor/RK)

  20. Lateral Dominance and Reading Disability.

    ERIC Educational Resources Information Center

    Harris, Albert J.

    1979-01-01

    Theory and research on the relation of lateral dominance to the causation of reading disability are reviewed. Both direct and indirect measures of cerebral hemisphere functioning are considered. (SBH)